Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits)
[SCSI] fix oops during scsi scanning
[SCSI] libsrp: fix memory leak in srp_ring_free()
[SCSI] libiscsi, bnx2i: make bound ep check common
[SCSI] libiscsi: add completion function for drivers that do not need pdu processing
[SCSI] scsi_dh_rdac: changes for rdac debug logging
[SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization
[SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach
[SCSI] sg: fix oops in the error path in sg_build_indirect()
[SCSI] mptsas : Bump version to 3.04.12
[SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command
[SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device
[SCSI] mptsas : PAE Kernel more than 4 GB kernel panic
[SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off
[SCSI] mptsas : Sanity check for phyinfo is added
[SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530
[SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller
[SCSI] qla2xxx: Update version number to 8.03.01-k6.
[SCSI] qla2xxx: Properly delete rports attached to a vport.
[SCSI] qla2xxx: Correct various NPIV issues.
[SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.
...
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index d05737a..06b982a 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -82,6 +82,8 @@
- info on the Block I/O (BIO) layer.
blockdev/
- info on block devices & drivers
+btmrvl.txt
+ - info on Marvell Bluetooth driver usage.
cachetlb.txt
- describes the cache/TLB flushing interfaces Linux uses.
cdrom/
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index 9f711d2..d2b8523 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -743,3 +743,80 @@
RCU, realtime RCU, sleepable RCU, performance.
"
}
+
+@article{PaulEMcKenney2008RCUOSR
+,author="Paul E. McKenney and Jonathan Walpole"
+,title="Introducing technology into the {Linux} kernel: a case study"
+,Year="2008"
+,journal="SIGOPS Oper. Syst. Rev."
+,volume="42"
+,number="5"
+,pages="4--17"
+,issn="0163-5980"
+,doi={http://doi.acm.org/10.1145/1400097.1400099}
+,publisher="ACM"
+,address="New York, NY, USA"
+,annotation={
+ Linux changed RCU to a far greater degree than RCU has changed Linux.
+}
+}
+
+@unpublished{PaulEMcKenney2008HierarchicalRCU
+,Author="Paul E. McKenney"
+,Title="Hierarchical {RCU}"
+,month="November"
+,day="3"
+,year="2008"
+,note="Available:
+\url{http://lwn.net/Articles/305782/}
+[Viewed November 6, 2008]"
+,annotation="
+ RCU with combining-tree-based grace-period detection,
+ permitting it to handle thousands of CPUs.
+"
+}
+
+@conference{PaulEMcKenney2009MaliciousURCU
+,Author="Paul E. McKenney"
+,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms"
+,Booktitle="linux.conf.au 2009"
+,month="January"
+,year="2009"
+,address="Hobart, Australia"
+,note="Available:
+\url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf}
+[Viewed February 2, 2009]"
+,annotation="
+ Realtime RCU and torture-testing RCU uses.
+"
+}
+
+@unpublished{MathieuDesnoyers2009URCU
+,Author="Mathieu Desnoyers"
+,Title="[{RFC} git tree] Userspace {RCU} (urcu) for {Linux}"
+,month="February"
+,day="5"
+,year="2009"
+,note="Available:
+\url{http://lkml.org/lkml/2009/2/5/572}
+\url{git://lttng.org/userspace-rcu.git}
+[Viewed February 20, 2009]"
+,annotation="
+ Mathieu Desnoyers's user-space RCU implementation.
+ git://lttng.org/userspace-rcu.git
+"
+}
+
+@unpublished{PaulEMcKenney2009BloatWatchRCU
+,Author="Paul E. McKenney"
+,Title="{RCU}: The {Bloatwatch} Edition"
+,month="March"
+,day="17"
+,year="2009"
+,note="Available:
+\url{http://lwn.net/Articles/323929/}
+[Viewed March 20, 2009]"
+,annotation="
+ Uniprocessor assumptions allow simplified RCU implementation.
+"
+}
diff --git a/Documentation/RCU/UP.txt b/Documentation/RCU/UP.txt
index aab4a9e..90ec534 100644
--- a/Documentation/RCU/UP.txt
+++ b/Documentation/RCU/UP.txt
@@ -2,14 +2,13 @@
A common misconception is that, on UP systems, the call_rcu() primitive
-may immediately invoke its function, and that the synchronize_rcu()
-primitive may return immediately. The basis of this misconception
+may immediately invoke its function. The basis of this misconception
is that since there is only one CPU, it should not be necessary to
wait for anything else to get done, since there are no other CPUs for
anything else to be happening on. Although this approach will -sort- -of-
work a surprising amount of the time, it is a very bad idea in general.
-This document presents three examples that demonstrate exactly how bad an
-idea this is.
+This document presents three examples that demonstrate exactly how bad
+an idea this is.
Example 1: softirq Suicide
@@ -82,11 +81,18 @@
Summary
-Permitting call_rcu() to immediately invoke its arguments or permitting
-synchronize_rcu() to immediately return breaks RCU, even on a UP system.
-So do not do it! Even on a UP system, the RCU infrastructure -must-
-respect grace periods, and -must- invoke callbacks from a known environment
-in which no locks are held.
+Permitting call_rcu() to immediately invoke its arguments breaks RCU,
+even on a UP system. So do not do it! Even on a UP system, the RCU
+infrastructure -must- respect grace periods, and -must- invoke callbacks
+from a known environment in which no locks are held.
+
+It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return
+immediately on an UP system. It is also safe for synchronize_rcu()
+to return immediately on UP systems, except when running preemptable
+RCU.
+
+Quick Quiz #3: Why can't synchronize_rcu() return immediately on
+ UP systems running preemptable RCU?
Answer to Quick Quiz #1:
@@ -117,3 +123,13 @@
callbacks acquire locks directly. However, a great many RCU
callbacks do acquire locks -indirectly-, for example, via
the kfree() primitive.
+
+Answer to Quick Quiz #3:
+ Why can't synchronize_rcu() return immediately on UP systems
+ running preemptable RCU?
+
+ Because some other task might have been preempted in the middle
+ of an RCU read-side critical section. If synchronize_rcu()
+ simply immediately returned, it would prematurely signal the
+ end of the grace period, which would come as a nasty shock to
+ that other thread when it started running again.
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index accfe2f..51525a3 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -11,7 +11,10 @@
structure is updated more than about 10% of the time, then
you should strongly consider some other approach, unless
detailed performance measurements show that RCU is nonetheless
- the right tool for the job.
+ the right tool for the job. Yes, you might think of RCU
+ as simply cutting overhead off of the readers and imposing it
+ on the writers. That is exactly why normal uses of RCU will
+ do much more reading than updating.
Another exception is where performance is not an issue, and RCU
provides a simpler implementation. An example of this situation
@@ -240,10 +243,11 @@
instead need to use synchronize_irq() or synchronize_sched().
12. Any lock acquired by an RCU callback must be acquired elsewhere
- with irq disabled, e.g., via spin_lock_irqsave(). Failing to
- disable irq on a given acquisition of that lock will result in
- deadlock as soon as the RCU callback happens to interrupt that
- acquisition's critical section.
+ with softirq disabled, e.g., via spin_lock_irqsave(),
+ spin_lock_bh(), etc. Failing to disable irq on a given
+ acquisition of that lock will result in deadlock as soon as the
+ RCU callback happens to interrupt that acquisition's critical
+ section.
13. RCU callbacks can be and are executed in parallel. In many cases,
the callback code simply wrappers around kfree(), so that this
@@ -310,3 +314,9 @@
Because these primitives only wait for pre-existing readers,
it is the caller's responsibility to guarantee safety to
any subsequent readers.
+
+16. The various RCU read-side primitives do -not- contain memory
+ barriers. The CPU (and in some cases, the compiler) is free
+ to reorder code into and out of RCU read-side critical sections.
+ It is the responsibility of the RCU update-side primitives to
+ deal with this.
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 7aa2002..2a23523 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -36,7 +36,7 @@
executed in user mode, or executed in the idle loop, we can
safely free up that item.
- Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
+ Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
same effect, but require that the readers manipulate CPU-local
counters. These counters allow limited types of blocking
within RCU read-side critical sections. SRCU also uses
@@ -79,10 +79,10 @@
o I hear that RCU needs work in order to support realtime kernels?
This work is largely completed. Realtime-friendly RCU can be
- enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
- However, work is in progress for enabling priority boosting of
- preempted RCU read-side critical sections. This is needed if you
- have CPU-bound realtime threads.
+ enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
+ parameter. However, work is in progress for enabling priority
+ boosting of preempted RCU read-side critical sections. This is
+ needed if you have CPU-bound realtime threads.
o Where can I find more information on RCU?
diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt
index 909602d..e439a0e 100644
--- a/Documentation/RCU/rcubarrier.txt
+++ b/Documentation/RCU/rcubarrier.txt
@@ -170,6 +170,13 @@
the timers, and only then invoke rcu_barrier() to wait for any remaining
RCU callbacks to complete.
+Of course, if you module uses call_rcu_bh(), you will need to invoke
+rcu_barrier_bh() before unloading. Similarly, if your module uses
+call_rcu_sched(), you will need to invoke rcu_barrier_sched() before
+unloading. If your module uses call_rcu(), call_rcu_bh(), -and-
+call_rcu_sched(), then you will need to invoke each of rcu_barrier(),
+rcu_barrier_bh(), and rcu_barrier_sched().
+
Implementing rcu_barrier()
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index a342b6e..9dba3bb 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -76,8 +76,10 @@
"rcu_sync" for rcu_read_lock() with synchronous reclamation,
"rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for
rcu_read_lock_bh() with synchronous reclamation, "srcu" for
- the "srcu_read_lock()" API, and "sched" for the use of
- preempt_disable() together with synchronize_sched().
+ the "srcu_read_lock()" API, "sched" for the use of
+ preempt_disable() together with synchronize_sched(),
+ and "sched_expedited" for the use of preempt_disable()
+ with synchronize_sched_expedited().
verbose Enable debug printk()s. Default is disabled.
@@ -162,6 +164,23 @@
"idx" value maps the "old" and "current" values to the underlying array,
and is useful for debugging.
+Similarly, sched_expedited RCU provides the following:
+
+ sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319
+ sched_expedited-torture: Reader Pipe: 12660320201 95875 0 0 0 0 0 0 0 0 0
+ sched_expedited-torture: Reader Batch: 12660424885 0 0 0 0 0 0 0 0 0 0
+ sched_expedited-torture: Free-Block Circulation: 1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
+ state: -1 / 0:0 3:0 4:0
+
+As before, the first four lines are similar to those for RCU.
+The last line shows the task-migration state. The first number is
+-1 if synchronize_sched_expedited() is idle, -2 if in the process of
+posting wakeups to the migration kthreads, and N when waiting on CPU N.
+Each of the colon-separated fields following the "/" is a CPU:state pair.
+Valid states are "0" for idle, "1" for waiting for quiescent state,
+"2" for passed through quiescent state, and "3" when a race with a
+CPU-hotplug event forces use of the synchronize_sched() primitive.
+
USAGE
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 02cced1..187bbf1 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -191,8 +191,7 @@
The output of "cat rcu/rcudata" looks as follows:
-rcu:
-rcu:
+rcu_sched:
0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
@@ -306,7 +305,7 @@
The output of "cat rcu/rcugp" looks as follows:
-rcu: completed=33062 gpnum=33063
+rcu_sched: completed=33062 gpnum=33063
rcu_bh: completed=464 gpnum=464
Again, this output is for both "rcu" and "rcu_bh". The fields are
@@ -413,7 +412,7 @@
The output of "cat rcu/rcu_pending" looks as follows:
-rcu:
+rcu_sched:
0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 9617082..e41a7fe 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -136,10 +136,10 @@
Used by a reader to inform the reclaimer that the reader is
entering an RCU read-side critical section. It is illegal
to block while in an RCU read-side critical section, though
- kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side
- critical sections. Any RCU-protected data structure accessed
- during an RCU read-side critical section is guaranteed to remain
- unreclaimed for the full duration of that critical section.
+ kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU
+ read-side critical sections. Any RCU-protected data structure
+ accessed during an RCU read-side critical section is guaranteed to
+ remain unreclaimed for the full duration of that critical section.
Reference counts may be used in conjunction with RCU to maintain
longer-term references to data structures.
@@ -785,6 +785,7 @@
rcu_dereference
list_for_each_entry_rcu
hlist_for_each_entry_rcu
+ hlist_nulls_for_each_entry_rcu
list_for_each_continue_rcu (to be deprecated in favor of new
list_for_each_entry_continue_rcu)
@@ -807,19 +808,23 @@
rcu_read_lock synchronize_net rcu_barrier
rcu_read_unlock synchronize_rcu
+ synchronize_rcu_expedited
call_rcu
bh: Critical sections Grace period Barrier
rcu_read_lock_bh call_rcu_bh rcu_barrier_bh
- rcu_read_unlock_bh
+ rcu_read_unlock_bh synchronize_rcu_bh
+ synchronize_rcu_bh_expedited
sched: Critical sections Grace period Barrier
- [preempt_disable] synchronize_sched rcu_barrier_sched
- [and friends] call_rcu_sched
+ rcu_read_lock_sched synchronize_sched rcu_barrier_sched
+ rcu_read_unlock_sched call_rcu_sched
+ [preempt_disable] synchronize_sched_expedited
+ [and friends]
SRCU: Critical sections Grace period Barrier
@@ -827,6 +832,9 @@
srcu_read_lock synchronize_srcu N/A
srcu_read_unlock
+SRCU: Initialization/cleanup
+ init_srcu_struct
+ cleanup_srcu_struct
See the comment headers in the source code (or the docbook generated
from them) for more information.
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
new file mode 100644
index 0000000..76b3a11
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -0,0 +1,75 @@
+ S3C24XX CPUfreq support
+ =======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2
diff --git a/Documentation/btmrvl.txt b/Documentation/btmrvl.txt
new file mode 100644
index 0000000..34916a4
--- /dev/null
+++ b/Documentation/btmrvl.txt
@@ -0,0 +1,119 @@
+=======================================================================
+ README for btmrvl driver
+=======================================================================
+
+
+All commands are used via debugfs interface.
+
+=====================
+Set/get driver configurations:
+
+Path: /debug/btmrvl/config/
+
+gpiogap=[n]
+hscfgcmd
+ These commands are used to configure the host sleep parameters.
+ bit 8:0 -- Gap
+ bit 16:8 -- GPIO
+
+ where GPIO is the pin number of GPIO used to wake up the host.
+ It could be any valid GPIO pin# (e.g. 0-7) or 0xff (SDIO interface
+ wakeup will be used instead).
+
+ where Gap is the gap in milli seconds between wakeup signal and
+ wakeup event, or 0xff for special host sleep setting.
+
+ Usage:
+ # Use SDIO interface to wake up the host and set GAP to 0x80:
+ echo 0xff80 > /debug/btmrvl/config/gpiogap
+ echo 1 > /debug/btmrvl/config/hscfgcmd
+
+ # Use GPIO pin #3 to wake up the host and set GAP to 0xff:
+ echo 0x03ff > /debug/btmrvl/config/gpiogap
+ echo 1 > /debug/btmrvl/config/hscfgcmd
+
+psmode=[n]
+pscmd
+ These commands are used to enable/disable auto sleep mode
+
+ where the option is:
+ 1 -- Enable auto sleep mode
+ 0 -- Disable auto sleep mode
+
+ Usage:
+ # Enable auto sleep mode
+ echo 1 > /debug/btmrvl/config/psmode
+ echo 1 > /debug/btmrvl/config/pscmd
+
+ # Disable auto sleep mode
+ echo 0 > /debug/btmrvl/config/psmode
+ echo 1 > /debug/btmrvl/config/pscmd
+
+
+hsmode=[n]
+hscmd
+ These commands are used to enable host sleep or wake up firmware
+
+ where the option is:
+ 1 -- Enable host sleep
+ 0 -- Wake up firmware
+
+ Usage:
+ # Enable host sleep
+ echo 1 > /debug/btmrvl/config/hsmode
+ echo 1 > /debug/btmrvl/config/hscmd
+
+ # Wake up firmware
+ echo 0 > /debug/btmrvl/config/hsmode
+ echo 1 > /debug/btmrvl/config/hscmd
+
+
+======================
+Get driver status:
+
+Path: /debug/btmrvl/status/
+
+Usage:
+ cat /debug/btmrvl/status/<args>
+
+where the args are:
+
+curpsmode
+ This command displays current auto sleep status.
+
+psstate
+ This command display the power save state.
+
+hsstate
+ This command display the host sleep state.
+
+txdnldrdy
+ This command displays the value of Tx download ready flag.
+
+
+=====================
+
+Use hcitool to issue raw hci command, refer to hcitool manual
+
+ Usage: Hcitool cmd <ogf> <ocf> [Parameters]
+
+ Interface Control Command
+ hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00 --Enable All interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01 --Enable Wlan interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02 --Enable BT interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x00 0x00 --Disable All interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01 --Disable Wlan interface
+ hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02 --Disable BT interface
+
+=======================================================================
+
+
+SD8688 firmware:
+
+/lib/firmware/sd8688_helper.bin
+/lib/firmware/sd8688.bin
+
+
+The images can be downloaded from:
+
+git.infradead.org/users/dwmw2/linux-firmware.git/libertas/
diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile
index 8df1a72..d98e4df 100644
--- a/Documentation/connector/Makefile
+++ b/Documentation/connector/Makefile
@@ -9,3 +9,8 @@
always := $(hostprogs-y)
HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
+
+all: modules
+
+modules clean:
+ $(MAKE) -C ../.. SUBDIRS=$(PWD) $@
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index 6a5be5d..1711adc 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) "cn_test: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -27,18 +29,17 @@
#include <linux/connector.h>
-static struct cb_id cn_test_id = { 0x123, 0x456 };
+static struct cb_id cn_test_id = { CN_NETLINK_USERS + 3, 0x456 };
static char cn_test_name[] = "cn_test";
static struct sock *nls;
static struct timer_list cn_test_timer;
-void cn_test_callback(void *data)
+static void cn_test_callback(struct cn_msg *msg)
{
- struct cn_msg *msg = (struct cn_msg *)data;
-
- printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
- __func__, jiffies, msg->id.idx, msg->id.val,
- msg->seq, msg->ack, msg->len, (char *)msg->data);
+ pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
+ __func__, jiffies, msg->id.idx, msg->id.val,
+ msg->seq, msg->ack, msg->len,
+ msg->len ? (char *)msg->data : "");
}
/*
@@ -63,9 +64,7 @@
skb = alloc_skb(size, GFP_ATOMIC);
if (!skb) {
- printk(KERN_ERR "Failed to allocate new skb with size=%u.\n",
- size);
-
+ pr_err("failed to allocate new skb with size=%u\n", size);
return -ENOMEM;
}
@@ -114,12 +113,12 @@
//netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
netlink_unicast(nls, skb, 0, 0);
- printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group);
+ pr_info("request was sent: group=0x%x\n", ctl->group);
return 0;
nlmsg_failure:
- printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack);
+ pr_err("failed to send %u.%u\n", msg->seq, msg->ack);
kfree_skb(skb);
return -EINVAL;
}
@@ -131,6 +130,8 @@
struct cn_msg *m;
char data[32];
+ pr_debug("%s: timer fired with data %lu\n", __func__, __data);
+
m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC);
if (m) {
@@ -150,7 +151,7 @@
cn_test_timer_counter++;
- mod_timer(&cn_test_timer, jiffies + HZ);
+ mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
}
static int cn_test_init(void)
@@ -168,8 +169,10 @@
}
setup_timer(&cn_test_timer, cn_test_timer_func, 0);
- cn_test_timer.expires = jiffies + HZ;
- add_timer(&cn_test_timer);
+ mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
+
+ pr_info("initialized with id={%u.%u}\n",
+ cn_test_id.idx, cn_test_id.val);
return 0;
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index ad6e0ba..81e6bf6 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -5,10 +5,10 @@
Kernel connector - new netlink based userspace <-> kernel space easy
to use communication module.
-Connector driver adds possibility to connect various agents using
-netlink based network. One must register callback and
-identifier. When driver receives special netlink message with
-appropriate identifier, appropriate callback will be called.
+The Connector driver makes it easy to connect various agents using a
+netlink based network. One must register a callback and an identifier.
+When the driver receives a special netlink message with the appropriate
+identifier, the appropriate callback will be called.
From the userspace point of view it's quite straightforward:
@@ -17,10 +17,10 @@
send();
recv();
-But if kernelspace want to use full power of such connections, driver
-writer must create special sockets, must know about struct sk_buff
-handling... Connector allows any kernelspace agents to use netlink
-based networking for inter-process communication in a significantly
+But if kernelspace wants to use the full power of such connections, the
+driver writer must create special sockets, must know about struct sk_buff
+handling, etc... The Connector driver allows any kernelspace agents to use
+netlink based networking for inter-process communication in a significantly
easier way:
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
@@ -32,15 +32,15 @@
__u32 val;
};
-idx and val are unique identifiers which must be registered in
-connector.h for in-kernel usage. void (*callback) (void *) - is a
-callback function which will be called when message with above idx.val
-will be received by connector core. Argument for that function must
+idx and val are unique identifiers which must be registered in the
+connector.h header for in-kernel usage. void (*callback) (void *) is a
+callback function which will be called when a message with above idx.val
+is received by the connector core. The argument for that function must
be dereferenced to struct cn_msg *.
struct cn_msg
{
- struct cb_id id;
+ struct cb_id id;
__u32 seq;
__u32 ack;
@@ -55,92 +55,95 @@
int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
-Registers new callback with connector core.
+ Registers new callback with connector core.
-struct cb_id *id - unique connector's user identifier.
- It must be registered in connector.h for legal in-kernel users.
-char *name - connector's callback symbolic name.
-void (*callback) (void *) - connector's callback.
+ struct cb_id *id - unique connector's user identifier.
+ It must be registered in connector.h for legal in-kernel users.
+ char *name - connector's callback symbolic name.
+ void (*callback) (void *) - connector's callback.
Argument must be dereferenced to struct cn_msg *.
+
void cn_del_callback(struct cb_id *id);
-Unregisters new callback with connector core.
+ Unregisters new callback with connector core.
-struct cb_id *id - unique connector's user identifier.
+ struct cb_id *id - unique connector's user identifier.
+
int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
-Sends message to the specified groups. It can be safely called from
-softirq context, but may silently fail under strong memory pressure.
-If there are no listeners for given group -ESRCH can be returned.
+ Sends message to the specified groups. It can be safely called from
+ softirq context, but may silently fail under strong memory pressure.
+ If there are no listeners for given group -ESRCH can be returned.
-struct cn_msg * - message header(with attached data).
-u32 __group - destination group.
+ struct cn_msg * - message header(with attached data).
+ u32 __group - destination group.
If __group is zero, then appropriate group will
be searched through all registered connector users,
and message will be delivered to the group which was
created for user with the same ID as in msg.
If __group is not zero, then message will be delivered
to the specified group.
-int gfp_mask - GFP mask.
+ int gfp_mask - GFP mask.
-Note: When registering new callback user, connector core assigns
-netlink group to the user which is equal to it's id.idx.
+ Note: When registering new callback user, connector core assigns
+ netlink group to the user which is equal to it's id.idx.
/*****************************************/
Protocol description.
/*****************************************/
-Current offers transport layer with fixed header. Recommended
-protocol which uses such header is following:
+The current framework offers a transport layer with fixed headers. The
+recommended protocol which uses such a header is as following:
msg->seq and msg->ack are used to determine message genealogy. When
-someone sends message it puts there locally unique sequence and random
-acknowledge numbers. Sequence number may be copied into
+someone sends a message, they use a locally unique sequence and random
+acknowledge number. The sequence number may be copied into
nlmsghdr->nlmsg_seq too.
-Sequence number is incremented with each message to be sent.
+The sequence number is incremented with each message sent.
-If we expect reply to our message, then sequence number in received
-message MUST be the same as in original message, and acknowledge
-number MUST be the same + 1.
+If you expect a reply to the message, then the sequence number in the
+received message MUST be the same as in the original message, and the
+acknowledge number MUST be the same + 1.
-If we receive message and it's sequence number is not equal to one we
-are expecting, then it is new message. If we receive message and it's
-sequence number is the same as one we are expecting, but it's
-acknowledge is not equal acknowledge number in original message + 1,
-then it is new message.
+If we receive a message and its sequence number is not equal to one we
+are expecting, then it is a new message. If we receive a message and
+its sequence number is the same as one we are expecting, but its
+acknowledge is not equal to the acknowledge number in the original
+message + 1, then it is a new message.
-Obviously, protocol header contains above id.
+Obviously, the protocol header contains the above id.
-connector allows event notification in the following form: kernel
+The connector allows event notification in the following form: kernel
driver or userspace process can ask connector to notify it when
-selected id's will be turned on or off(registered or unregistered it's
-callback). It is done by sending special command to connector
-driver(it also registers itself with id={-1, -1}).
+selected ids will be turned on or off (registered or unregistered its
+callback). It is done by sending a special command to the connector
+driver (it also registers itself with id={-1, -1}).
-As example of usage Documentation/connector now contains cn_test.c -
-testing module which uses connector to request notification and to
-send messages.
+As example of this usage can be found in the cn_test.c module which
+uses the connector to request notification and to send messages.
/*****************************************/
Reliability.
/*****************************************/
-Netlink itself is not reliable protocol, that means that messages can
+Netlink itself is not a reliable protocol. That means that messages can
be lost due to memory pressure or process' receiving queue overflowed,
-so caller is warned must be prepared. That is why struct cn_msg [main
-connector's message header] contains u32 seq and u32 ack fields.
+so caller is warned that it must be prepared. That is why the struct
+cn_msg [main connector's message header] contains u32 seq and u32 ack
+fields.
/*****************************************/
Userspace usage.
/*****************************************/
+
2.6.14 has a new netlink socket implementation, which by default does not
-allow to send data to netlink groups other than 1.
-So, if to use netlink socket (for example using connector)
-with different group number userspace application must subscribe to
-that group. It can be achieved by following pseudocode:
+allow people to send data to netlink groups other than 1.
+So, if you wish to use a netlink socket (for example using connector)
+with a different group number, the userspace application must subscribe to
+that group first. It can be achieved by the following pseudocode:
s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
@@ -160,8 +163,8 @@
}
Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
-option. To drop multicast subscription one should call above socket option
-with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+option. To drop a multicast subscription, one should call the above socket
+option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
2.6.14 netlink code only allows to select a group which is less or equal to
the maximum group number, which is used at netlink_kernel_create() time.
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
index c5092ad..4848db8 100644
--- a/Documentation/connector/ucon.c
+++ b/Documentation/connector/ucon.c
@@ -30,18 +30,24 @@
#include <arpa/inet.h>
+#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <time.h>
+#include <getopt.h>
#include <linux/connector.h>
#define DEBUG
#define NETLINK_CONNECTOR 11
+/* Hopefully your userspace connector.h matches this kernel */
+#define CN_TEST_IDX CN_NETLINK_USERS + 3
+#define CN_TEST_VAL 0x456
+
#ifdef DEBUG
#define ulog(f, a...) fprintf(stdout, f, ##a)
#else
@@ -83,6 +89,25 @@
return err;
}
+static void usage(void)
+{
+ printf(
+ "Usage: ucon [options] [output file]\n"
+ "\n"
+ "\t-h\tthis help screen\n"
+ "\t-s\tsend buffers to the test module\n"
+ "\n"
+ "The default behavior of ucon is to subscribe to the test module\n"
+ "and wait for state messages. Any ones received are dumped to the\n"
+ "specified output file (or stdout). The test module is assumed to\n"
+ "have an id of {%u.%u}\n"
+ "\n"
+ "If you get no output, then verify the cn_test module id matches\n"
+ "the expected id above.\n"
+ , CN_TEST_IDX, CN_TEST_VAL
+ );
+}
+
int main(int argc, char *argv[])
{
int s;
@@ -94,17 +119,34 @@
FILE *out;
time_t tm;
struct pollfd pfd;
+ bool send_msgs = false;
- if (argc < 2)
- out = stdout;
- else {
- out = fopen(argv[1], "a+");
+ while ((s = getopt(argc, argv, "hs")) != -1) {
+ switch (s) {
+ case 's':
+ send_msgs = true;
+ break;
+
+ case 'h':
+ usage();
+ return 0;
+
+ default:
+ /* getopt() outputs an error for us */
+ usage();
+ return 1;
+ }
+ }
+
+ if (argc != optind) {
+ out = fopen(argv[optind], "a+");
if (!out) {
ulog("Unable to open %s for writing: %s\n",
argv[1], strerror(errno));
out = stdout;
}
- }
+ } else
+ out = stdout;
memset(buf, 0, sizeof(buf));
@@ -115,9 +157,11 @@
}
l_local.nl_family = AF_NETLINK;
- l_local.nl_groups = 0x123; /* bitmask of requested groups */
+ l_local.nl_groups = -1; /* bitmask of requested groups */
l_local.nl_pid = 0;
+ ulog("subscribing to %u.%u\n", CN_TEST_IDX, CN_TEST_VAL);
+
if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
perror("bind");
close(s);
@@ -130,15 +174,15 @@
setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on));
}
#endif
- if (0) {
+ if (send_msgs) {
int i, j;
memset(buf, 0, sizeof(buf));
data = (struct cn_msg *)buf;
- data->id.idx = 0x123;
- data->id.val = 0x456;
+ data->id.idx = CN_TEST_IDX;
+ data->id.val = CN_TEST_VAL;
data->seq = seq++;
data->ack = 0;
data->len = 0;
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 09e031c..503d212 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,35 @@
---------------------------
+What: PRISM54
+When: 2.6.34
+
+Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+ prism54 wireless driver. After Intersil stopped selling these
+ devices in preference for the newer more flexible SoftMAC devices
+ a SoftMAC device driver was required and prism54 did not support
+ them. The p54pci driver now exists and has been present in the kernel for
+ a while. This driver supports both SoftMAC devices and FullMAC devices.
+ The main difference between these devices was the amount of memory which
+ could be used for the firmware. The SoftMAC devices support a smaller
+ amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+ devices's memory. p54pci supports not only PCI / Cardbus but also USB
+ and SPI. Since p54pci supports all devices prism54 supports
+ you will have a conflict. I'm not quite sure how distributions are
+ handling this conflict right now. prism54 was kept around due to
+ claims users may experience issues when using the SoftMAC driver.
+ Time has passed users have not reported issues. If you use prism54
+ and for whatever reason you cannot use p54pci please let us know!
+ E-mail us at: linux-wireless@vger.kernel.org
+
+ For more information see the p54 wiki page:
+
+ http://wireless.kernel.org/en/users/Drivers/p54
+
+Who: Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
What: IRQF_SAMPLE_RANDOM
Check: IRQF_SAMPLE_RANDOM
When: July 2009
@@ -206,24 +235,6 @@
---------------------------
-What: libata spindown skipping and warning
-When: Dec 2008
-Why: Some halt(8) implementations synchronize caches for and spin
- down libata disks because libata didn't use to spin down disk on
- system halt (only synchronized caches).
- Spin down on system halt is now implemented. sysfs node
- /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
- spin down support is available.
- Because issuing spin down command to an already spun down disk
- makes some disks spin up just to spin down again, libata tracks
- device spindown status to skip the extra spindown command and
- warn about it.
- This is to give userspace tools the time to get updated and will
- be removed after userspace is reasonably updated.
-Who: Tejun Heo <htejun@gmail.com>
-
----------------------------
-
What: i386/x86_64 bzImage symlinks
When: April 2010
@@ -235,31 +246,6 @@
---------------------------
What (Why):
- - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
- (superseded by xt_TOS/xt_tos target & match)
-
- - "forwarding" header files like ipt_mac.h in
- include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
-
- - xt_CONNMARK match revision 0
- (superseded by xt_CONNMARK match revision 1)
-
- - xt_MARK target revisions 0 and 1
- (superseded by xt_MARK match revision 2)
-
- - xt_connmark match revision 0
- (superseded by xt_connmark match revision 1)
-
- - xt_conntrack match revision 0
- (superseded by xt_conntrack match revision 1)
-
- - xt_iprange match revision 0,
- include/linux/netfilter_ipv4/ipt_iprange.h
- (superseded by xt_iprange match revision 1)
-
- - xt_mark match revision 0
- (superseded by xt_mark match revision 1)
-
- xt_recent: the old ipt_recent proc dir
(superseded by /proc/net/xt_recent)
@@ -394,15 +380,6 @@
-----------------------------
-What: obsolete generic irq defines and typedefs
-When: 2.6.30
-Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
- have been kept around for migration reasons. After more than two years
- it's time to remove them finally
-Who: Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
What: fakephp and associated sysfs files in /sys/bus/pci/slots/
When: 2011
Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
@@ -468,3 +445,27 @@
cpufreq core and contained inside cpufreq.c. Other dependent
drivers should not use it in order to safely avoid lockdep issues.
Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What: sound-slot/service-* module aliases and related clutters in
+ sound/sound_core.c
+When: August 2010
+Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+ (14) and requests modules using custom sound-slot/service-*
+ module aliases. The only benefit of doing this is allowing
+ use of custom module aliases which might as well be considered
+ a bug at this point. This preemptive claiming prevents
+ alternative OSS implementations.
+
+ Till the feature is removed, the kernel will be requesting
+ both sound-slot/service-* and the standard char-major-* module
+ aliases and allow turning off the pre-claiming selectively via
+ CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+ kernel parameter.
+
+ After the transition phase is complete, both the custom module
+ aliases and switches to disable it will go away. This removal
+ will also allow making ALSA OSS emulation independent of
+ sound_core. The dependency will be broken then too.
+Who: Tejun Heo <tj@kernel.org>
diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt
index bf80806..6208f55 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.txt
@@ -123,6 +123,9 @@
There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
+A stand-alone version of the module (which should build for any 2.6 kernel)
+is available via (http://github.com/ericvh/9p-sac/tree/master)
+
News and other information is maintained on SWiK (http://swik.net/v9fs).
Bug reports may be issued through the kernel.org bugzilla
diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt
new file mode 100644
index 0000000..fd966dc
--- /dev/null
+++ b/Documentation/filesystems/gfs2-uevents.txt
@@ -0,0 +1,100 @@
+ uevents and GFS2
+ ==================
+
+During the lifetime of a GFS2 mount, a number of uevents are generated.
+This document explains what the events are and what they are used
+for (by gfs_controld in gfs2-utils).
+
+A list of GFS2 uevents
+-----------------------
+
+1. ADD
+
+The ADD event occurs at mount time. It will always be the first
+uevent generated by the newly created filesystem. If the mount
+is successful, an ONLINE uevent will follow. If it is not successful
+then a REMOVE uevent will follow.
+
+The ADD uevent has two environment variables: SPECTATOR=[0|1]
+and RDONLY=[0|1] that specify the spectator status (a read-only mount
+with no journal assigned), and read-only (with journal assigned) status
+of the filesystem respectively.
+
+2. ONLINE
+
+The ONLINE uevent is generated after a successful mount or remount. It
+has the same environment variables as the ADD uevent. The ONLINE
+uevent, along with the two environment variables for spectator and
+RDONLY are a relatively recent addition (2.6.32-rc+) and will not
+be generated by older kernels.
+
+3. CHANGE
+
+The CHANGE uevent is used in two places. One is when reporting the
+successful mount of the filesystem by the first node (FIRSTMOUNT=Done).
+This is used as a signal by gfs_controld that it is then ok for other
+nodes in the cluster to mount the filesystem.
+
+The other CHANGE uevent is used to inform of the completion
+of journal recovery for one of the filesystems journals. It has
+two environment variables, JID= which specifies the journal id which
+has just been recovered, and RECOVERY=[Done|Failed] to indicate the
+success (or otherwise) of the operation. These uevents are generated
+for every journal recovered, whether it is during the initial mount
+process or as the result of gfs_controld requesting a specific journal
+recovery via the /sys/fs/gfs2/<fsname>/lock_module/recovery file.
+
+Because the CHANGE uevent was used (in early versions of gfs_controld)
+without checking the environment variables to discover the state, we
+cannot add any more functions to it without running the risk of
+someone using an older version of the user tools and breaking their
+cluster. For this reason the ONLINE uevent was used when adding a new
+uevent for a successful mount or remount.
+
+4. OFFLINE
+
+The OFFLINE uevent is only generated due to filesystem errors and is used
+as part of the "withdraw" mechanism. Currently this doesn't give any
+information about what the error is, which is something that needs to
+be fixed.
+
+5. REMOVE
+
+The REMOVE uevent is generated at the end of an unsuccessful mount
+or at the end of a umount of the filesystem. All REMOVE uevents will
+have been preceeded by at least an ADD uevent for the same fileystem,
+and unlike the other uevents is generated automatically by the kernel's
+kobject subsystem.
+
+
+Information common to all GFS2 uevents (uevent environment variables)
+----------------------------------------------------------------------
+
+1. LOCKTABLE=
+
+The LOCKTABLE is a string, as supplied on the mount command
+line (locktable=) or via fstab. It is used as a filesystem label
+as well as providing the information for a lock_dlm mount to be
+able to join the cluster.
+
+2. LOCKPROTO=
+
+The LOCKPROTO is a string, and its value depends on what is set
+on the mount command line, or via fstab. It will be either
+lock_nolock or lock_dlm. In the future other lock managers
+may be supported.
+
+3. JOURNALID=
+
+If a journal is in use by the filesystem (journals are not
+assigned for spectator mounts) then this will give the
+numeric journal id in all GFS2 uevents.
+
+4. UUID=
+
+With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID
+into the filesystem superblock. If it exists, this will
+be included in every uevent relating to the filesystem.
+
+
+
diff --git a/Documentation/filesystems/nfs.txt b/Documentation/filesystems/nfs.txt
new file mode 100644
index 0000000..f50f26c
--- /dev/null
+++ b/Documentation/filesystems/nfs.txt
@@ -0,0 +1,98 @@
+
+The NFS client
+==============
+
+The NFS version 2 protocol was first documented in RFC1094 (March 1989).
+Since then two more major releases of NFS have been published, with NFSv3
+being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
+2003).
+
+The Linux NFS client currently supports all the above published versions,
+and work is in progress on adding support for minor version 1 of the NFSv4
+protocol.
+
+The purpose of this document is to provide information on some of the
+upcall interfaces that are used in order to provide the NFS client with
+some of the information that it requires in order to fully comply with
+the NFS spec.
+
+The DNS resolver
+================
+
+NFSv4 allows for one server to refer the NFS client to data that has been
+migrated onto another server by means of the special "fs_locations"
+attribute. See
+ http://tools.ietf.org/html/rfc3530#section-6
+and
+ http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+
+The fs_locations information can take the form of either an ip address and
+a path, or a DNS hostname and a path. The latter requires the NFS client to
+do a DNS lookup in order to mount the new volume, and hence the need for an
+upcall to allow userland to provide this service.
+
+Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
+/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
+
+ (1) The process checks the dns_resolve cache to see if it contains a
+ valid entry. If so, it returns that entry and exits.
+
+ (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
+ (may be changed using the 'nfs.cache_getent' kernel boot parameter)
+ is run, with two arguments:
+ - the cache name, "dns_resolve"
+ - the hostname to resolve
+
+ (3) After looking up the corresponding ip address, the helper script
+ writes the result into the rpc_pipefs pseudo-file
+ '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
+ in the following (text) format:
+
+ "<ip address> <hostname> <ttl>\n"
+
+ Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
+ (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
+ <hostname> is identical to the second argument of the helper
+ script, and <ttl> is the 'time to live' of this cache entry (in
+ units of seconds).
+
+ Note: If <ip address> is invalid, say the string "0", then a negative
+ entry is created, which will cause the kernel to treat the hostname
+ as having no valid DNS translation.
+
+
+
+
+A basic sample /sbin/nfs_cache_getent
+=====================================
+
+#!/bin/bash
+#
+ttl=600
+#
+cut=/usr/bin/cut
+getent=/usr/bin/getent
+rpc_pipefs=/var/lib/nfs/rpc_pipefs
+#
+die()
+{
+ echo "Usage: $0 cache_name entry_name"
+ exit 1
+}
+
+[ $# -lt 2 ] && die
+cachename="$1"
+cache_path=${rpc_pipefs}/cache/${cachename}/channel
+
+case "${cachename}" in
+ dns_resolve)
+ name="$2"
+ result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
+ [ -z "${result}" ] && result="0"
+ ;;
+ *)
+ die
+ ;;
+esac
+echo "${result} ${name} ${ttl}" >${cache_path}
+
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index b843743..0d15ebc 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -46,7 +46,7 @@
following:
dd if=/proc/sequence of=out1 count=1
- dd if=/proc/sequence skip=1 out=out2 count=1
+ dd if=/proc/sequence skip=1 of=out2 count=1
Then concatenate the output files out1 and out2 and get the right
result. Yes, it is a thoroughly useless module, but the point is to show
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
new file mode 100644
index 0000000..84eb268
--- /dev/null
+++ b/Documentation/flexible-arrays.txt
@@ -0,0 +1,99 @@
+Using flexible arrays in the kernel
+Last updated for 2.6.31
+Jonathan Corbet <corbet@lwn.net>
+
+Large contiguous memory allocations can be unreliable in the Linux kernel.
+Kernel programmers will sometimes respond to this problem by allocating
+pages with vmalloc(). This solution not ideal, though. On 32-bit systems,
+memory from vmalloc() must be mapped into a relatively small address space;
+it's easy to run out. On SMP systems, the page table changes required by
+vmalloc() allocations can require expensive cross-processor interrupts on
+all CPUs. And, on all systems, use of space in the vmalloc() range
+increases pressure on the translation lookaside buffer (TLB), reducing the
+performance of the system.
+
+In many cases, the need for memory from vmalloc() can be eliminated by
+piecing together an array from smaller parts; the flexible array library
+exists to make this task easier.
+
+A flexible array holds an arbitrary (within limits) number of fixed-sized
+objects, accessed via an integer index. Sparse arrays are handled
+reasonably well. Only single-page allocations are made, so memory
+allocation failures should be relatively rare. The down sides are that the
+arrays cannot be indexed directly, individual object size cannot exceed the
+system page size, and putting data into a flexible array requires a copy
+operation. It's also worth noting that flexible arrays do no internal
+locking at all; if concurrent access to an array is possible, then the
+caller must arrange for appropriate mutual exclusion.
+
+The creation of a flexible array is done with:
+
+ #include <linux/flex_array.h>
+
+ struct flex_array *flex_array_alloc(int element_size,
+ unsigned int total,
+ gfp_t flags);
+
+The individual object size is provided by element_size, while total is the
+maximum number of objects which can be stored in the array. The flags
+argument is passed directly to the internal memory allocation calls. With
+the current code, using flags to ask for high memory is likely to lead to
+notably unpleasant side effects.
+
+Storing data into a flexible array is accomplished with a call to:
+
+ int flex_array_put(struct flex_array *array, unsigned int element_nr,
+ void *src, gfp_t flags);
+
+This call will copy the data from src into the array, in the position
+indicated by element_nr (which must be less than the maximum specified when
+the array was created). If any memory allocations must be performed, flags
+will be used. The return value is zero on success, a negative error code
+otherwise.
+
+There might possibly be a need to store data into a flexible array while
+running in some sort of atomic context; in this situation, sleeping in the
+memory allocator would be a bad thing. That can be avoided by using
+GFP_ATOMIC for the flags value, but, often, there is a better way. The
+trick is to ensure that any needed memory allocations are done before
+entering atomic context, using:
+
+ int flex_array_prealloc(struct flex_array *array, unsigned int start,
+ unsigned int end, gfp_t flags);
+
+This function will ensure that memory for the elements indexed in the range
+defined by start and end has been allocated. Thereafter, a
+flex_array_put() call on an element in that range is guaranteed not to
+block.
+
+Getting data back out of the array is done with:
+
+ void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
+
+The return value is a pointer to the data element, or NULL if that
+particular element has never been allocated.
+
+Note that it is possible to get back a valid pointer for an element which
+has never been stored in the array. Memory for array elements is allocated
+one page at a time; a single allocation could provide memory for several
+adjacent elements. The flexible array code does not know if a specific
+element has been written; it only knows if the associated memory is
+present. So a flex_array_get() call on an element which was never stored
+in the array has the potential to return a pointer to random data. If the
+caller does not have a separate way to know which elements were actually
+stored, it might be wise, at least, to add GFP_ZERO to the flags argument
+to ensure that all elements are zeroed.
+
+There is no way to remove a single element from the array. It is possible,
+though, to remove all elements with a call to:
+
+ void flex_array_free_parts(struct flex_array *array);
+
+This call frees all elements, but leaves the array itself in place.
+Freeing the entire array is done with:
+
+ void flex_array_free(struct flex_array *array);
+
+As of this writing, there are no users of flexible arrays in the mainline
+kernel. The functions described here are also not exported to modules;
+that will probably be fixed when somebody comes up with a need for it.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index dbea4f9..aafca0a 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -121,6 +121,7 @@
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
'c' 80-9F arch/s390/include/asm/chsc.h
+'c' A0-AF arch/x86/include/asm/msr.h
'd' 00-FF linux/char/drm/drm/h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!
@@ -192,7 +193,7 @@
0xAD 00 Netfilter device in development:
<mailto:rusty@rustcorp.com.au>
0xAE all linux/kvm.h Kernel-based Virtual Machine
- <mailto:kvm-devel@lists.sourceforge.net>
+ <mailto:kvm@vger.kernel.org>
0xB0 all RATIO devices in development:
<mailto:vgo@ratio.de>
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7936b80..3a23864 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -57,6 +57,7 @@
ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ KVM Kernel Virtual Machine support is enabled.
LIBATA Libata driver is enabled
LP Printer support is enabled.
LOOP Loopback device support is enabled.
@@ -1098,6 +1099,44 @@
kstack=N [X86] Print N words from the kernel stack
in oops dumps.
+ kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
+ Default is 0 (don't ignore, but inject #GP)
+
+ kvm.oos_shadow= [KVM] Disable out-of-sync shadow paging.
+ Default is 1 (enabled)
+
+ kvm-amd.nested= [KVM,AMD] Allow nested virtualization in KVM/SVM.
+ Default is 0 (off)
+
+ kvm-amd.npt= [KVM,AMD] Disable nested paging (virtualized MMU)
+ for all guests.
+ Default is 1 (enabled) if in 64bit or 32bit-PAE mode
+
+ kvm-intel.bypass_guest_pf=
+ [KVM,Intel] Disables bypassing of guest page faults
+ on Intel chips. Default is 1 (enabled)
+
+ kvm-intel.ept= [KVM,Intel] Disable extended page tables
+ (virtualized MMU) support on capable Intel chips.
+ Default is 1 (enabled)
+
+ kvm-intel.emulate_invalid_guest_state=
+ [KVM,Intel] Enable emulation of invalid guest states
+ Default is 0 (disabled)
+
+ kvm-intel.flexpriority=
+ [KVM,Intel] Disable FlexPriority feature (TPR shadow).
+ Default is 1 (enabled)
+
+ kvm-intel.unrestricted_guest=
+ [KVM,Intel] Disable unrestricted guest feature
+ (virtualized real and unpaged mode) on capable
+ Intel chips. Default is 1 (enabled)
+
+ kvm-intel.vpid= [KVM,Intel] Disable Virtual Processor Identification
+ feature (tagged TLBs) on capable Intel chips.
+ Default is 1 (enabled)
+
l2cr= [PPC]
l3cr= [PPC]
@@ -1503,6 +1542,14 @@
[NFS] set the TCP port on which the NFSv4 callback
channel should listen.
+ nfs.cache_getent=
+ [NFS] sets the pathname to the program which is used
+ to update the NFS client cache entries.
+
+ nfs.cache_getent_timeout=
+ [NFS] sets the timeout after which an attempt to
+ update a cache entry is deemed to have failed.
+
nfs.idmap_cache_timeout=
[NFS] set the maximum lifetime for idmapper cache
entries.
@@ -1535,6 +1582,11 @@
symbolic names: lapic and ioapic
Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
+ netpoll.carrier_timeout=
+ [NET] Specifies amount of time (in seconds) that
+ netpoll should wait for a carrier. By default netpoll
+ waits 4 seconds.
+
no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
emulation library even if a 387 maths coprocessor
is present.
@@ -2395,6 +2447,18 @@
stifb= [HW]
Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
+ sunrpc.min_resvport=
+ sunrpc.max_resvport=
+ [NFS,SUNRPC]
+ SunRPC servers often require that client requests
+ originate from a privileged port (i.e. a port in the
+ range 0 < portnr < 1024).
+ An administrator who wishes to reserve some of these
+ ports for other uses may adjust the range that the
+ kernel's sunrpc client considers to be privileged
+ using these two parameters to set the minimum and
+ maximum port values.
+
sunrpc.pool_mode=
[NFS]
Control how the NFS server code allocates CPUs to
@@ -2411,6 +2475,15 @@
pernode one pool for each NUMA node (equivalent
to global on non-NUMA machines)
+ sunrpc.tcp_slot_table_entries=
+ sunrpc.udp_slot_table_entries=
+ [NFS,SUNRPC]
+ Sets the upper limit on the number of simultaneous
+ RPC calls that can be sent from the client to a
+ server. Increasing these values may allow you to
+ improve throughput, but will also increase the
+ amount of memory reserved for use by the client.
+
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
@@ -2480,6 +2553,11 @@
trace_buf_size=nn[KMG]
[FTRACE] will set tracing buffer size.
+ trace_event=[event-list]
+ [FTRACE] Set and start specified trace events in order
+ to facilitate early boot debugging.
+ See also Documentation/trace/events.txt
+
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format:
<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index b56aacc..e4dbbdb 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -26,7 +26,7 @@
- Notes on accessing payload contents
- Defining a key type
- Request-key callback service
- - Key access filesystem
+ - Garbage collection
============
@@ -113,6 +113,9 @@
(*) Dead. The key's type was unregistered, and so the key is now useless.
+Keys in the last three states are subject to garbage collection. See the
+section on "Garbage collection".
+
====================
KEY SERVICE OVERVIEW
@@ -754,6 +757,26 @@
successful.
+ (*) Install the calling process's session keyring on its parent.
+
+ long keyctl(KEYCTL_SESSION_TO_PARENT);
+
+ This functions attempts to install the calling process's session keyring
+ on to the calling process's parent, replacing the parent's current session
+ keyring.
+
+ The calling process must have the same ownership as its parent, the
+ keyring must have the same ownership as the calling process, the calling
+ process must have LINK permission on the keyring and the active LSM module
+ mustn't deny permission, otherwise error EPERM will be returned.
+
+ Error ENOMEM will be returned if there was insufficient memory to complete
+ the operation, otherwise 0 will be returned to indicate success.
+
+ The keyring will be replaced next time the parent process leaves the
+ kernel and resumes executing userspace.
+
+
===============
KERNEL SERVICES
===============
@@ -1231,3 +1254,17 @@
In this case, the program isn't required to actually attach the key to a ring;
the rings are provided for reference.
+
+
+==================
+GARBAGE COLLECTION
+==================
+
+Dead keys (for which the type has been removed) will be automatically unlinked
+from those keyrings that point to them and deleted as soon as possible by a
+background garbage collector.
+
+Similarly, revoked and expired keys will be garbage collected, but only after a
+certain amount of time has passed. This time is set as a number of seconds in:
+
+ /proc/sys/kernel/keys/gc_delay
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 8906803..34f6638 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -27,6 +27,13 @@
# echo scan > /sys/kernel/debug/kmemleak
+To clear the list of all current possible memory leaks:
+
+ # echo clear > /sys/kernel/debug/kmemleak
+
+New leaks will then come up upon reading /sys/kernel/debug/kmemleak
+again.
+
Note that the orphan objects are listed in the order they were allocated
and one object at the beginning of the list may cause other subsequent
objects to be reported as orphan.
@@ -42,6 +49,9 @@
scan=<secs> - set the automatic memory scanning period in seconds
(default 600, 0 to stop the automatic scanning)
scan - trigger a memory scan
+ clear - clear list of current memory leak suspects, done by
+ marking all current reported unreferenced objects grey
+ dump=<addr> - dump information about the object found at <addr>
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
the kernel command line.
@@ -86,6 +96,27 @@
address inside the block address range that need to be found so that the
block is not considered a leak. One example is __vmalloc().
+Testing specific sections with kmemleak
+---------------------------------------
+
+Upon initial bootup your /sys/kernel/debug/kmemleak output page may be
+quite extensive. This can also be the case if you have very buggy code
+when doing development. To work around these situations you can use the
+'clear' command to clear all reported unreferenced objects from the
+/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear'
+you can find new unreferenced objects; this should help with testing
+specific sections of code.
+
+To test a critical section on demand with a clean kmemleak do:
+
+ # echo clear > /sys/kernel/debug/kmemleak
+ ... test your kernel or modules ...
+ # echo scan > /sys/kernel/debug/kmemleak
+
+Then as usual to get your report with:
+
+ # cat /sys/kernel/debug/kmemleak
+
Kmemleak API
------------
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
new file mode 100644
index 0000000..5a4bc8cf
--- /dev/null
+++ b/Documentation/kvm/api.txt
@@ -0,0 +1,759 @@
+The Definitive KVM (Kernel-based Virtual Machine) API Documentation
+===================================================================
+
+1. General description
+
+The kvm API is a set of ioctls that are issued to control various aspects
+of a virtual machine. The ioctls belong to three classes
+
+ - System ioctls: These query and set global attributes which affect the
+ whole kvm subsystem. In addition a system ioctl is used to create
+ virtual machines
+
+ - VM ioctls: These query and set attributes that affect an entire virtual
+ machine, for example memory layout. In addition a VM ioctl is used to
+ create virtual cpus (vcpus).
+
+ Only run VM ioctls from the same process (address space) that was used
+ to create the VM.
+
+ - vcpu ioctls: These query and set attributes that control the operation
+ of a single virtual cpu.
+
+ Only run vcpu ioctls from the same thread that was used to create the
+ vcpu.
+
+2. File descritpors
+
+The kvm API is centered around file descriptors. An initial
+open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
+can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
+handle will create a VM file descripror which can be used to issue VM
+ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
+and return a file descriptor pointing to it. Finally, ioctls on a vcpu
+fd can be used to control the vcpu, including the important task of
+actually running guest code.
+
+In general file descriptors can be migrated among processes by means
+of fork() and the SCM_RIGHTS facility of unix domain socket. These
+kinds of tricks are explicitly not supported by kvm. While they will
+not cause harm to the host, their actual behavior is not guaranteed by
+the API. The only supported use is one virtual machine per process,
+and one vcpu per thread.
+
+3. Extensions
+
+As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
+incompatible change are allowed. However, there is an extension
+facility that allows backward-compatible extensions to the API to be
+queried and used.
+
+The extension mechanism is not based on on the Linux version number.
+Instead, kvm defines extension identifiers and a facility to query
+whether a particular extension identifier is available. If it is, a
+set of ioctls is available for application use.
+
+4. API description
+
+This section describes ioctls that can be used to control kvm guests.
+For each ioctl, the following information is provided along with a
+description:
+
+ Capability: which KVM extension provides this ioctl. Can be 'basic',
+ which means that is will be provided by any kernel that supports
+ API version 12 (see section 4.1), or a KVM_CAP_xyz constant, which
+ means availability needs to be checked with KVM_CHECK_EXTENSION
+ (see section 4.4).
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Type: system, vm, or vcpu.
+
+ Parameters: what parameters are accepted by the ioctl.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+4.1 KVM_GET_API_VERSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: the constant KVM_API_VERSION (=12)
+
+This identifies the API version as the stable kvm API. It is not
+expected that this number will change. However, Linux 2.6.20 and
+2.6.21 report earlier versions; these are not documented and not
+supported. Applications should refuse to run if KVM_GET_API_VERSION
+returns a value other than 12. If this check passes, all ioctls
+described as 'basic' will be available.
+
+4.2 KVM_CREATE_VM
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: a VM fd that can be used to control the new virtual machine.
+
+The new VM has no virtual cpus and no memory. An mmap() of a VM fd
+will access the virtual machine's physical address space; offset zero
+corresponds to guest physical address zero. Use of mmap() on a VM fd
+is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is
+available.
+
+4.3 KVM_GET_MSR_INDEX_LIST
+
+Capability: basic
+Architectures: x86
+Type: system
+Parameters: struct kvm_msr_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+ E2BIG: the msr index list is to be to fit in the array specified by
+ the user.
+
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+This ioctl returns the guest msrs that are supported. The list varies
+by kvm version and host processor, but does not change otherwise. The
+user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in
+the indices array with their numbers.
+
+4.4 KVM_CHECK_EXTENSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: extension identifier (KVM_CAP_*)
+Returns: 0 if unsupported; 1 (or some other positive integer) if supported
+
+The API allows the application to query about extensions to the core
+kvm API. Userspace passes an extension identifier (an integer) and
+receives an integer that describes the extension availability.
+Generally 0 means no and 1 means yes, but some extensions may report
+additional information in the integer return value.
+
+4.5 KVM_GET_VCPU_MMAP_SIZE
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: size of vcpu mmap area, in bytes
+
+The KVM_RUN ioctl (cf.) communicates with userspace via a shared
+memory region. This ioctl returns the size of that region. See the
+KVM_RUN documentation for details.
+
+4.6 KVM_SET_MEMORY_REGION
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_memory_region (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES 1UL
+
+This ioctl allows the user to create or modify a guest physical memory
+slot. When changing an existing slot, it may be moved in the guest
+physical memory space, or its flags may be modified. It may not be
+resized. Slots may not overlap.
+
+The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
+instructs kvm to keep track of writes to memory within the slot. See
+the KVM_GET_DIRTY_LOG ioctl.
+
+It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead
+of this API, if available. This newer API allows placing guest memory
+at specified locations in the host address space, yielding better
+control and easy access.
+
+4.6 KVM_CREATE_VCPU
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: vcpu id (apic id on x86)
+Returns: vcpu fd on success, -1 on error
+
+This API adds a vcpu to a virtual machine. The vcpu id is a small integer
+in the range [0, max_vcpus).
+
+4.7 KVM_GET_DIRTY_LOG (vm ioctl)
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_dirty_log (in/out)
+Returns: 0 on success, -1 on error
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding;
+ union {
+ void __user *dirty_bitmap; /* one bit per page */
+ __u64 padding;
+ };
+};
+
+Given a memory slot, return a bitmap containing any pages dirtied
+since the last call to this ioctl. Bit 0 is the first page in the
+memory slot. Ensure the entire structure is cleared to avoid padding
+issues.
+
+4.8 KVM_SET_MEMORY_ALIAS
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_memory_alias (in)
+Returns: 0 (success), -1 (error)
+
+struct kvm_memory_alias {
+ __u32 slot; /* this has a different namespace than memory slots */
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size;
+ __u64 target_phys_addr;
+};
+
+Defines a guest physical address space region as an alias to another
+region. Useful for aliased address, for example the VGA low memory
+window. Should not be used with userspace memory.
+
+4.9 KVM_RUN
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+Errors:
+ EINTR: an unmasked signal is pending
+
+This ioctl is used to run a guest virtual cpu. While there are no
+explicit parameters, there is an implicit parameter block that can be
+obtained by mmap()ing the vcpu fd at offset 0, with the size given by
+KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct
+kvm_run' (see below).
+
+4.10 KVM_GET_REGS
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_regs (out)
+Returns: 0 on success, -1 on error
+
+Reads the general purpose registers from the vcpu.
+
+/* x86 */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+4.11 KVM_SET_REGS
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_regs (in)
+Returns: 0 on success, -1 on error
+
+Writes the general purpose registers into the vcpu.
+
+See KVM_GET_REGS for the data structure.
+
+4.12 KVM_GET_SREGS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (out)
+Returns: 0 on success, -1 on error
+
+Reads special registers from the vcpu.
+
+/* x86 */
+struct kvm_sregs {
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+interrupt_bitmap is a bitmap of pending external interrupts. At most
+one bit may be set. This interrupt has been acknowledged by the APIC
+but not yet injected into the cpu core.
+
+4.13 KVM_SET_SREGS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (in)
+Returns: 0 on success, -1 on error
+
+Writes special registers into the vcpu. See KVM_GET_SREGS for the
+data structures.
+
+4.14 KVM_TRANSLATE
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_translation (in/out)
+Returns: 0 on success, -1 on error
+
+Translates a virtual address according to the vcpu's current address
+translation mode.
+
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+ __u8 pad[5];
+};
+
+4.15 KVM_INTERRUPT
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Queues a hardware interrupt vector to be injected. This is only
+useful if in-kernel local APIC is not used.
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 irq;
+};
+
+Note 'irq' is an interrupt vector, not an interrupt pin or line.
+
+4.16 KVM_DEBUG_GUEST
+
+Capability: basic
+Architectures: none
+Type: vcpu ioctl
+Parameters: none)
+Returns: -1 on error
+
+Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
+
+4.17 KVM_GET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in/out)
+Returns: 0 on success, -1 on error
+
+Reads model-specific registers from the vcpu. Supported msr indices can
+be obtained using KVM_GET_MSR_INDEX_LIST.
+
+struct kvm_msrs {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 pad;
+
+ struct kvm_msr_entry entries[0];
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array) and the 'index' member of each array entry.
+kvm will fill in the 'data' member.
+
+4.18 KVM_SET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in)
+Returns: 0 on success, -1 on error
+
+Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the
+data structures.
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array), and the 'index' and 'data' members of each
+array entry.
+
+4.19 KVM_SET_CPUID
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_cpuid (in)
+Returns: 0 on success, -1 on error
+
+Defines the vcpu responses to the cpuid instruction. Applications
+should use the KVM_SET_CPUID2 ioctl if available.
+
+
+struct kvm_cpuid_entry {
+ __u32 function;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry entries[0];
+};
+
+4.20 KVM_SET_SIGNAL_MASK
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_signal_mask (in)
+Returns: 0 on success, -1 on error
+
+Defines which signals are blocked during execution of KVM_RUN. This
+signal mask temporarily overrides the threads signal mask. Any
+unblocked signal received (except SIGKILL and SIGSTOP, which retain
+their traditional behaviour) will cause KVM_RUN to return with -EINTR.
+
+Note the signal will only be delivered if not blocked by the original
+signal mask.
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+ __u32 len;
+ __u8 sigset[0];
+};
+
+4.21 KVM_GET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (out)
+Returns: 0 on success, -1 on error
+
+Reads the floating point state from the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+4.22 KVM_SET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (in)
+Returns: 0 on success, -1 on error
+
+Writes the floating point state to the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+4.23 KVM_CREATE_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Creates an interrupt controller model in the kernel. On x86, creates a virtual
+ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
+local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
+only go to the IOAPIC. On ia64, a IOSAPIC is created.
+
+4.24 KVM_IRQ_LINE
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_level
+Returns: 0 on success, -1 on error
+
+Sets the level of a GSI input to the interrupt controller model in the kernel.
+Requires that an interrupt controller model has been previously created with
+KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level
+to be set to 1 and then back to 0.
+
+struct kvm_irq_level {
+ union {
+ __u32 irq; /* GSI */
+ __s32 status; /* not used for KVM_IRQ_LEVEL */
+ };
+ __u32 level; /* 0 or 1 */
+};
+
+4.25 KVM_GET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in/out)
+Returns: 0 on success, -1 on error
+
+Reads the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP into a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+4.26 KVM_SET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP from a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+5. The kvm_run structure
+
+Application code obtains a pointer to the kvm_run structure by
+mmap()ing a vcpu fd. From that point, application code can control
+execution by changing fields in kvm_run prior to calling the KVM_RUN
+ioctl, and obtain information about the reason KVM_RUN returned by
+looking up structure members.
+
+struct kvm_run {
+ /* in */
+ __u8 request_interrupt_window;
+
+Request that KVM_RUN return when it becomes possible to inject external
+interrupts into the guest. Useful in conjunction with KVM_INTERRUPT.
+
+ __u8 padding1[7];
+
+ /* out */
+ __u32 exit_reason;
+
+When KVM_RUN has returned successfully (return value 0), this informs
+application code why KVM_RUN has returned. Allowable values for this
+field are detailed below.
+
+ __u8 ready_for_interrupt_injection;
+
+If request_interrupt_window has been specified, this field indicates
+an interrupt can be injected now with KVM_INTERRUPT.
+
+ __u8 if_flag;
+
+The value of the current interrupt flag. Only valid if in-kernel
+local APIC is not used.
+
+ __u8 padding2[2];
+
+ /* in (pre_kvm_run), out (post_kvm_run) */
+ __u64 cr8;
+
+The value of the cr8 register. Only valid if in-kernel local APIC is
+not used. Both input and output.
+
+ __u64 apic_base;
+
+The value of the APIC BASE msr. Only valid if in-kernel local
+APIC is not used. Both input and output.
+
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u64 hardware_exit_reason;
+ } hw;
+
+If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown
+reasons. Further architecture-specific information is available in
+hardware_exit_reason.
+
+ /* KVM_EXIT_FAIL_ENTRY */
+ struct {
+ __u64 hardware_entry_failure_reason;
+ } fail_entry;
+
+If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due
+to unknown reasons. Further architecture-specific information is
+available in hardware_entry_failure_reason.
+
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+
+Unused.
+
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u16 port;
+ __u32 count;
+ __u64 data_offset; /* relative to kvm_run start */
+ } io;
+
+If exit_reason is KVM_EXIT_IO_IN or KVM_EXIT_IO_OUT, then the vcpu has
+executed a port I/O instruction which could not be satisfied by kvm.
+data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
+where kvm expects application code to place the data for the next
+KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a patcked array.
+
+ struct {
+ struct kvm_debug_exit_arch arch;
+ } debug;
+
+Unused.
+
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+
+If exit_reason is KVM_EXIT_MMIO or KVM_EXIT_IO_OUT, then the vcpu has
+executed a memory-mapped I/O instruction which could not be satisfied
+by kvm. The 'data' member contains the written data if 'is_write' is
+true, and should be filled by application code otherwise.
+
+ /* KVM_EXIT_HYPERCALL */
+ struct {
+ __u64 nr;
+ __u64 args[6];
+ __u64 ret;
+ __u32 longmode;
+ __u32 pad;
+ } hypercall;
+
+Unused.
+
+ /* KVM_EXIT_TPR_ACCESS */
+ struct {
+ __u64 rip;
+ __u32 is_write;
+ __u32 pad;
+ } tpr_access;
+
+To be documented (KVM_TPR_ACCESS_REPORTING).
+
+ /* KVM_EXIT_S390_SIEIC */
+ struct {
+ __u8 icptcode;
+ __u64 mask; /* psw upper half */
+ __u64 addr; /* psw lower half */
+ __u16 ipa;
+ __u32 ipb;
+ } s390_sieic;
+
+s390 specific.
+
+ /* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR 1
+#define KVM_S390_RESET_CLEAR 2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT 8
+#define KVM_S390_RESET_IPL 16
+ __u64 s390_reset_flags;
+
+s390 specific.
+
+ /* KVM_EXIT_DCR */
+ struct {
+ __u32 dcrn;
+ __u32 data;
+ __u8 is_write;
+ } dcr;
+
+powerpc specific.
+
+ /* Fix the size of the union. */
+ char padding[256];
+ };
+};
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 1634c6dc..50189bf 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -60,6 +60,8 @@
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
generic_netlink.txt
- info on Generic Netlink
+ieee802154.txt
+ - Linux IEEE 802.15.4 implementation, API and drivers
ip-sysctl.txt
- /proc/sys/net/ipv4/* variables
ip_dynaddr.txt
diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
index a0280ad..23c995e 100644
--- a/Documentation/networking/ieee802154.txt
+++ b/Documentation/networking/ieee802154.txt
@@ -22,7 +22,7 @@
.....
The address family, socket addresses etc. are defined in the
-include/net/ieee802154/af_ieee802154.h header or in the special header
+include/net/af_ieee802154.h header or in the special header
in our userspace package (see either linux-zigbee sourceforge download page
or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
@@ -33,7 +33,7 @@
============================
Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
-See the include/net/ieee802154/nl802154.h header. Our userspace tools package
+See the include/net/nl802154.h header. Our userspace tools package
(see above) provides CLI configuration utility for radio interfaces and simple
coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
@@ -54,10 +54,14 @@
HardMAC
=======
-See the header include/net/ieee802154/netdevice.h. You have to implement Linux
+See the header include/net/ieee802154_netdev.h. You have to implement Linux
net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
-code via plain sk_buffs. The control block of sk_buffs will contain additional
-info as described in the struct ieee802154_mac_cb.
+code via plain sk_buffs. On skb reception skb->cb must contain additional
+info as described in the struct ieee802154_mac_cb. During packet transmission
+the skb->cb is used to provide additional data to device's header_ops->create
+function. Be aware, that this data can be overriden later (when socket code
+submits skb to qdisc), so if you need something from that cb later, you should
+store info in the skb->data on your own.
To hook the MLME interface you have to populate the ml_priv field of your
net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are
@@ -69,8 +73,8 @@
SoftMAC
=======
-We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC
+We are going to provide intermediate layer implementing IEEE 802.15.4 MAC
in software. This is currently WIP.
-See header include/net/ieee802154/mac802154.h and several drivers in
-drivers/ieee802154/
+See header include/net/mac802154.h and several drivers in drivers/ieee802154/.
+
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8be7623..fbe427a 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -311,9 +311,12 @@
connections.
tcp_orphan_retries - INTEGER
- How may times to retry before killing TCP connection, closed
- by our side. Default value 7 corresponds to ~50sec-16min
- depending on RTO. If you machine is loaded WEB server,
+ This value influences the timeout of a locally closed TCP connection,
+ when RTO retransmissions remain unacknowledged.
+ See tcp_retries2 for more details.
+
+ The default value is 7.
+ If your machine is a loaded WEB server,
you should think about lowering this value, such sockets
may consume significant resources. Cf. tcp_max_orphans.
@@ -327,16 +330,28 @@
certain TCP stacks.
tcp_retries1 - INTEGER
- How many times to retry before deciding that something is wrong
- and it is necessary to report this suspicion to network layer.
- Minimal RFC value is 3, it is default, which corresponds
- to ~3sec-8min depending on RTO.
+ This value influences the time, after which TCP decides, that
+ something is wrong due to unacknowledged RTO retransmissions,
+ and reports this suspicion to the network layer.
+ See tcp_retries2 for more details.
+
+ RFC 1122 recommends at least 3 retransmissions, which is the
+ default.
tcp_retries2 - INTEGER
- How may times to retry before killing alive TCP connection.
- RFC1122 says that the limit should be longer than 100 sec.
- It is too small number. Default value 15 corresponds to ~13-30min
- depending on RTO.
+ This value influences the timeout of an alive TCP connection,
+ when RTO retransmissions remain unacknowledged.
+ Given a value of N, a hypothetical TCP connection following
+ exponential backoff with an initial RTO of TCP_RTO_MIN would
+ retransmit N times before killing the connection at the (N+1)th RTO.
+
+ The default value of 15 yields a hypothetical timeout of 924.6
+ seconds and is a lower bound for the effective timeout.
+ TCP will effectively time out at the first RTO which exceeds the
+ hypothetical timeout.
+
+ RFC 1122 recommends at least 100 seconds for the timeout,
+ which corresponds to a value of at least 8.
tcp_rfc1337 - BOOLEAN
If set, the TCP stack behaves conforming to RFC1337. If unset,
@@ -1282,6 +1297,16 @@
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
+addr_scope_policy - INTEGER
+ Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
+
+ 0 - Disable IPv4 address scoping
+ 1 - Enable IPv4 address scoping
+ 2 - Follow draft but allow IPv4 private addresses
+ 3 - Follow draft but allow IPv4 link local addresses
+
+ Default: 1
+
/proc/sys/net/core/*
dev_weight - INTEGER
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
index 2d10053..ae66f9b 100644
--- a/Documentation/s390/s390dbf.txt
+++ b/Documentation/s390/s390dbf.txt
@@ -495,6 +495,13 @@
string plus two varargs one would need to allocate a (3 * sizeof(long))
byte data area in the debug_register() function.
+IMPORTANT: Using "%s" in sprintf event functions is dangerous. You can only
+use "%s" in the sprintf event functions, if the memory for the passed string is
+available as long as the debug feature exists. The reason behind this is that
+due to performance considerations only a pointer to the string is stored in
+the debug feature. If you log a string that is freed afterwards, you will get
+an OOPS when inspecting the debug feature, because then the debug feature will
+access the already freed memory.
NOTE: If using the sprintf view do NOT use other event/exception functions
than the sprintf-event and -exception functions.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 4252697..1c8eb45 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -60,6 +60,12 @@
slots - Reserve the slot index for the given driver.
This option takes multiple strings.
See "Module Autoloading Support" section for details.
+ debug - Specifies the debug message level
+ (0 = disable debug prints, 1 = normal debug messages,
+ 2 = verbose debug messages)
+ This option appears only when CONFIG_SND_DEBUG=y.
+ This option can be dynamically changed via sysfs
+ /sys/modules/snd/parameters/debug file.
Module snd-pcm-oss
------------------
@@ -513,6 +519,26 @@
or input, but you may use this module for any application which
requires a sound card (like RealPlayer).
+ pcm_devs - Number of PCM devices assigned to each card
+ (default = 1, up to 4)
+ pcm_substreams - Number of PCM substreams assigned to each PCM
+ (default = 8, up to 16)
+ hrtimer - Use hrtimer (=1, default) or system timer (=0)
+ fake_buffer - Fake buffer allocations (default = 1)
+
+ When multiple PCM devices are created, snd-dummy gives different
+ behavior to each PCM device:
+ 0 = interleaved with mmap support
+ 1 = non-interleaved with mmap support
+ 2 = interleaved without mmap
+ 3 = non-interleaved without mmap
+
+ As default, snd-dummy drivers doesn't allocate the real buffers
+ but either ignores read/write or mmap a single dummy page to all
+ buffer pages, in order to save the resouces. If your apps need
+ the read/ written buffer data to be consistent, pass fake_buffer=0
+ option.
+
The power-management is supported.
Module snd-echo3g
@@ -768,6 +794,10 @@
bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
Passing -1 will make the driver to choose the appropriate
value based on the controller chip.
+ patch - Specifies the early "patch" files to modify the HD-audio
+ setup before initializing the codecs. This option is
+ available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+ See HD-Audio.txt for details.
[Single (global) options]
single_cmd - Use single immediate commands to communicate with
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 939a3dd..97eebd6 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -114,8 +114,8 @@
samsung-nc10 Samsung NC10 mini notebook
auto auto-config reading BIOS (default)
-ALC882/885
-==========
+ALC882/883/885/888/889
+======================
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
@@ -127,12 +127,8 @@
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
- auto auto-config reading BIOS (default)
-
-ALC883/888
-==========
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack digital with SPDIF I/O
+ 3stack-2ch-dig 3-jack with SPDIF I/O (ALC883)
+ alc883-6stack-dig 6-jack digital with SPDIF I/O (ALC883)
3stack-6ch 3-jack 6-channel
3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
6stack-dig-demo 6-jack digital for Intel demo board
@@ -140,6 +136,7 @@
acer-aspire Acer Aspire 9810
acer-aspire-4930g Acer Aspire 4930G
acer-aspire-6530g Acer Aspire 6530G
+ acer-aspire-7730g Acer Aspire 7730G
acer-aspire-8930g Acer Aspire 8930G
medion Medion Laptops
medion-md2 Medion MD2
@@ -155,10 +152,13 @@
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
+ clevo-m540r Clevo M540R (6ch + digital)
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
fujitsu-xa3530 Fujitsu AMILO XA3530
3stack-6ch-intel Intel DG33* boards
+ intel-alc889a Intel IbexPeak with ALC889A
+ intel-x58 Intel DX58 with ALC889
asus-p5q ASUS P5Q-EM boards
mb31 MacBook 3,1
sony-vaio-tt Sony VAIO TT
@@ -229,7 +229,7 @@
======
basic default configuration
thinkpad Lenovo Thinkpad T61/X61
- dell Dell T3400
+ dell_desktop Dell T3400
AD1986A
=======
@@ -258,6 +258,7 @@
laptop-micsense Laptop with Mic sense (old model fujitsu)
laptop-hpmicsense Laptop with HP and Mic senses
benq Benq R55E
+ laptop-hp530 HP 530 laptop
test for testing/debugging purpose, almost all controls
can be adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
@@ -278,9 +279,16 @@
hp-dv6736 HP dv6736
lenovo-x200 Lenovo X200 laptop
+Conexant 5066
+=============
+ laptop Basic Laptop config (default)
+ dell-laptop Dell laptops
+ olpc-xo-1_5 OLPC XO 1.5
+
STAC9200
========
ref Reference board
+ oqo OQO Model 2
dell-d21 Dell (unknown)
dell-d22 Dell (unknown)
dell-d23 Dell (unknown)
@@ -368,10 +376,12 @@
===========
ref Reference board
no-jd BIOS setup but without jack-detection
+ intel Intel DG45* mobos
dell-m6-amic Dell desktops/laptops with analog mics
dell-m6-dmic Dell desktops/laptops with digital mics
dell-m6 Dell desktops/laptops with both type of mics
dell-eq Dell desktops/laptops
+ alienware Alienware M17x
auto BIOS setup (default)
STAC92HD83*
@@ -385,3 +395,8 @@
========
vaio VAIO laptop without SPDIF
auto BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+ mbp55 MacBook Pro 5,5
+ auto BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 71ac995..7b8a5f9 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -139,6 +139,10 @@
table until any matching entry is found. If you have a new machine,
you may see a message like below:
------------------------------------------------------------------------
+ hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
+------------------------------------------------------------------------
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
------------------------------------------------------------------------
Even if you see such a message, DON'T PANIC. Take a deep breath and
@@ -403,6 +407,66 @@
------------------------------------------------------------------------
+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec. This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [model]
+ auto
+
+ [pincfg]
+ 0x12 0x411111f0
+
+ [verb]
+ 0x20 0x500 0x03
+ 0x20 0x400 0xff
+
+ [hint]
+ hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`. The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec. The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware(). Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware. For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+ options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
Power-Saving
~~~~~~~~~~~~
The power-saving is a kind of auto-suspend of the device. When the
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 322a00bb..2dbff53 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -19,6 +19,7 @@
show up in /proc/sys/kernel:
- acpi_video_flags
- acct
+- callhome [ S390 only ]
- auto_msgmni
- core_pattern
- core_uses_pid
@@ -91,6 +92,21 @@
==============================================================
+callhome:
+
+Controls the kernel's callhome behavior in case of a kernel panic.
+
+The s390 hardware allows an operating system to send a notification
+to a service organization (callhome) in case of an operating system panic.
+
+When the value in this file is 0 (which is the default behavior)
+nothing happens in case of a kernel panic. If this value is set to "1"
+the complete kernel oops message is send to the IBM customer service
+organization in case the mainframe the Linux operating system is running
+on has a service contract with IBM.
+
+==============================================================
+
core_pattern:
core_pattern is used to specify a core dumpfile pattern name.
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index f157d75..2bcc8d4 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -83,6 +83,15 @@
X - there is a mixture of events enabled and disabled
? - this file does not affect any event
+2.3 Boot option
+---------------
+
+In order to facilitate early boot debugging, use boot option:
+
+ trace_event=[event-list]
+
+The format of this boot option is the same as described in section 2.1.
+
3. Defining an event-enabled tracepoint
=======================================
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index a39b3c7..355d0f1 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -85,26 +85,19 @@
This file holds the output of the trace in a human
readable format (described below).
- latency_trace:
-
- This file shows the same trace but the information
- is organized more to display possible latencies
- in the system (described below).
-
trace_pipe:
The output is the same as the "trace" file but this
file is meant to be streamed with live tracing.
- Reads from this file will block until new data
- is retrieved. Unlike the "trace" and "latency_trace"
- files, this file is a consumer. This means reading
- from this file causes sequential reads to display
- more current data. Once data is read from this
- file, it is consumed, and will not be read
- again with a sequential read. The "trace" and
- "latency_trace" files are static, and if the
- tracer is not adding more data, they will display
- the same information every time they are read.
+ Reads from this file will block until new data is
+ retrieved. Unlike the "trace" file, this file is a
+ consumer. This means reading from this file causes
+ sequential reads to display more current data. Once
+ data is read from this file, it is consumed, and
+ will not be read again with a sequential read. The
+ "trace" file is static, and if the tracer is not
+ adding more data,they will display the same
+ information every time they are read.
trace_options:
@@ -117,10 +110,10 @@
Some of the tracers record the max latency.
For example, the time interrupts are disabled.
This time is saved in this file. The max trace
- will also be stored, and displayed by either
- "trace" or "latency_trace". A new max trace will
- only be recorded if the latency is greater than
- the value in this file. (in microseconds)
+ will also be stored, and displayed by "trace".
+ A new max trace will only be recorded if the
+ latency is greater than the value in this
+ file. (in microseconds)
buffer_size_kb:
@@ -210,7 +203,7 @@
the trace with the longest max latency.
See tracing_max_latency. When a new max is recorded,
it replaces the old trace. It is best to view this
- trace via the latency_trace file.
+ trace with the latency-format option enabled.
"preemptoff"
@@ -307,8 +300,8 @@
Latency trace format
--------------------
-For traces that display latency times, the latency_trace file
-gives somewhat more information to see why a latency happened.
+When the latency-format option is enabled, the trace file gives
+somewhat more information to see why a latency happened.
Here is a typical trace.
# tracer: irqsoff
@@ -380,9 +373,10 @@
The above is mostly meaningful for kernel developers.
- time: This differs from the trace file output. The trace file output
- includes an absolute timestamp. The timestamp used by the
- latency_trace file is relative to the start of the trace.
+ time: When the latency-format option is enabled, the trace file
+ output includes a timestamp relative to the start of the
+ trace. This differs from the output when latency-format
+ is disabled, which includes an absolute timestamp.
delay: This is just to help catch your eye a bit better. And
needs to be fixed to be only relative to the same CPU.
@@ -440,7 +434,8 @@
sym-addr:
bash-4000 [01] 1477.606694: simple_strtoul <c0339346>
- verbose - This deals with the latency_trace file.
+ verbose - This deals with the trace file when the
+ latency-format option is enabled.
bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
(+0.000ms): simple_strtoul (strict_strtoul)
@@ -472,7 +467,7 @@
the app is no longer running
The lookup is performed when you read
- trace,trace_pipe,latency_trace. Example:
+ trace,trace_pipe. Example:
a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
@@ -481,6 +476,11 @@
every scheduling event. Will add overhead if
there's a lot of tasks running at once.
+ latency-format - This option changes the trace. When
+ it is enabled, the trace displays
+ additional information about the
+ latencies, as described in "Latency
+ trace format".
sched_switch
------------
@@ -596,12 +596,13 @@
an example:
# echo irqsoff > current_tracer
+ # echo latency-format > trace_options
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# ls -ltr
[...]
# echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
# tracer: irqsoff
#
irqsoff latency trace v1.1.5 on 2.6.26
@@ -703,12 +704,13 @@
is much like the irqsoff tracer.
# echo preemptoff > current_tracer
+ # echo latency-format > trace_options
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# ls -ltr
[...]
# echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
# tracer: preemptoff
#
preemptoff latency trace v1.1.5 on 2.6.26-rc8
@@ -850,12 +852,13 @@
tracers.
# echo preemptirqsoff > current_tracer
+ # echo latency-format > trace_options
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# ls -ltr
[...]
# echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
# tracer: preemptirqsoff
#
preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
@@ -1012,11 +1015,12 @@
'chrt' which changes the priority of the task.
# echo wakeup > current_tracer
+ # echo latency-format > trace_options
# echo 0 > tracing_max_latency
# echo 1 > tracing_enabled
# chrt -f 5 sleep 1
# echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
# tracer: wakeup
#
wakeup latency trace v1.1.5 on 2.6.26-rc8
diff --git a/Documentation/trace/function-graph-fold.vim b/Documentation/trace/function-graph-fold.vim
new file mode 100644
index 0000000..0544b50
--- /dev/null
+++ b/Documentation/trace/function-graph-fold.vim
@@ -0,0 +1,42 @@
+" Enable folding for ftrace function_graph traces.
+"
+" To use, :source this file while viewing a function_graph trace, or use vim's
+" -S option to load from the command-line together with a trace. You can then
+" use the usual vim fold commands, such as "za", to open and close nested
+" functions. While closed, a fold will show the total time taken for a call,
+" as would normally appear on the line with the closing brace. Folded
+" functions will not include finish_task_switch(), so folding should remain
+" relatively sane even through a context switch.
+"
+" Note that this will almost certainly only work well with a
+" single-CPU trace (e.g. trace-cmd report --cpu 1).
+
+function! FunctionGraphFoldExpr(lnum)
+ let line = getline(a:lnum)
+ if line[-1:] == '{'
+ if line =~ 'finish_task_switch() {$'
+ return '>1'
+ endif
+ return 'a1'
+ elseif line[-1:] == '}'
+ return 's1'
+ else
+ return '='
+ endif
+endfunction
+
+function! FunctionGraphFoldText()
+ let s = split(getline(v:foldstart), '|', 1)
+ if getline(v:foldend+1) =~ 'finish_task_switch() {$'
+ let s[2] = ' task switch '
+ else
+ let e = split(getline(v:foldend), '|', 1)
+ let s[2] = e[2]
+ endif
+ return join(s, '|')
+endfunction
+
+setlocal foldexpr=FunctionGraphFoldExpr(v:lnum)
+setlocal foldtext=FunctionGraphFoldText()
+setlocal foldcolumn=12
+setlocal foldmethod=expr
diff --git a/Documentation/trace/ring-buffer-design.txt b/Documentation/trace/ring-buffer-design.txt
new file mode 100644
index 0000000..5b1d23d
--- /dev/null
+++ b/Documentation/trace/ring-buffer-design.txt
@@ -0,0 +1,955 @@
+ Lockless Ring Buffer Design
+ ===========================
+
+Copyright 2009 Red Hat Inc.
+ Author: Steven Rostedt <srostedt@redhat.com>
+ License: The GNU Free Documentation License, Version 1.2
+ (dual licensed under the GPL v2)
+Reviewers: Mathieu Desnoyers, Huang Ying, Hidetoshi Seto,
+ and Frederic Weisbecker.
+
+
+Written for: 2.6.31
+
+Terminology used in this Document
+---------------------------------
+
+tail - where new writes happen in the ring buffer.
+
+head - where new reads happen in the ring buffer.
+
+producer - the task that writes into the ring buffer (same as writer)
+
+writer - same as producer
+
+consumer - the task that reads from the buffer (same as reader)
+
+reader - same as consumer.
+
+reader_page - A page outside the ring buffer used solely (for the most part)
+ by the reader.
+
+head_page - a pointer to the page that the reader will use next
+
+tail_page - a pointer to the page that will be written to next
+
+commit_page - a pointer to the page with the last finished non nested write.
+
+cmpxchg - hardware assisted atomic transaction that performs the following:
+
+ A = B iff previous A == C
+
+ R = cmpxchg(A, C, B) is saying that we replace A with B if and only if
+ current A is equal to C, and we put the old (current) A into R
+
+ R gets the previous A regardless if A is updated with B or not.
+
+ To see if the update was successful a compare of R == C may be used.
+
+The Generic Ring Buffer
+-----------------------
+
+The ring buffer can be used in either an overwrite mode or in
+producer/consumer mode.
+
+Producer/consumer mode is where the producer were to fill up the
+buffer before the consumer could free up anything, the producer
+will stop writing to the buffer. This will lose most recent events.
+
+Overwrite mode is where the produce were to fill up the buffer
+before the consumer could free up anything, the producer will
+overwrite the older data. This will lose the oldest events.
+
+No two writers can write at the same time (on the same per cpu buffer),
+but a writer may interrupt another writer, but it must finish writing
+before the previous writer may continue. This is very important to the
+algorithm. The writers act like a "stack". The way interrupts works
+enforces this behavior.
+
+
+ writer1 start
+ <preempted> writer2 start
+ <preempted> writer3 start
+ writer3 finishes
+ writer2 finishes
+ writer1 finishes
+
+This is very much like a writer being preempted by an interrupt and
+the interrupt doing a write as well.
+
+Readers can happen at any time. But no two readers may run at the
+same time, nor can a reader preempt/interrupt another reader. A reader
+can not preempt/interrupt a writer, but it may read/consume from the
+buffer at the same time as a writer is writing, but the reader must be
+on another processor to do so. A reader may read on its own processor
+and can be preempted by a writer.
+
+A writer can preempt a reader, but a reader can not preempt a writer.
+But a reader can read the buffer at the same time (on another processor)
+as a writer.
+
+The ring buffer is made up of a list of pages held together by a link list.
+
+At initialization a reader page is allocated for the reader that is not
+part of the ring buffer.
+
+The head_page, tail_page and commit_page are all initialized to point
+to the same page.
+
+The reader page is initialized to have its next pointer pointing to
+the head page, and its previous pointer pointing to a page before
+the head page.
+
+The reader has its own page to use. At start up time, this page is
+allocated but is not attached to the list. When the reader wants
+to read from the buffer, if its page is empty (like it is on start up)
+it will swap its page with the head_page. The old reader page will
+become part of the ring buffer and the head_page will be removed.
+The page after the inserted page (old reader_page) will become the
+new head page.
+
+Once the new page is given to the reader, the reader could do what
+it wants with it, as long as a writer has left that page.
+
+A sample of how the reader page is swapped: Note this does not
+show the head page in the buffer, it is for demonstrating a swap
+only.
+
+ +------+
+ |reader| RING BUFFER
+ |page |
+ +------+
+ +---+ +---+ +---+
+ | |-->| |-->| |
+ | |<--| |<--| |
+ +---+ +---+ +---+
+ ^ | ^ |
+ | +-------------+ |
+ +-----------------+
+
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------------------+
+ +------+ v
+ | +---+ +---+ +---+
+ | | |-->| |-->| |
+ | | |<--| |<--| |<-+
+ | +---+ +---+ +---+ |
+ | ^ | ^ | |
+ | | +-------------+ | |
+ | +-----------------+ |
+ +------------------------------------+
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------------------+
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | |-->| |-->| |
+ | | | | | |<--| |<-+
+ | | +---+ +---+ +---+ |
+ | | | ^ | |
+ | | +-------------+ | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+ +------+
+ |buffer| RING BUFFER
+ |page |-------------------+
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | | | |-->| |
+ | | New | | | |<--| |<-+
+ | | Reader +---+ +---+ +---+ |
+ | | page ----^ | |
+ | | | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+
+
+It is possible that the page swapped is the commit page and the tail page,
+if what is in the ring buffer is less than what is held in a buffer page.
+
+
+ reader page commit page tail page
+ | | |
+ v | |
+ +---+ | |
+ | |<----------+ |
+ | |<------------------------+
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+This case is still valid for this algorithm.
+When the writer leaves the page, it simply goes into the ring buffer
+since the reader page still points to the next location in the ring
+buffer.
+
+
+The main pointers:
+
+ reader page - The page used solely by the reader and is not part
+ of the ring buffer (may be swapped in)
+
+ head page - the next page in the ring buffer that will be swapped
+ with the reader page.
+
+ tail page - the page where the next write will take place.
+
+ commit page - the page that last finished a write.
+
+The commit page only is updated by the outer most writer in the
+writer stack. A writer that preempts another writer will not move the
+commit page.
+
+When data is written into the ring buffer, a position is reserved
+in the ring buffer and passed back to the writer. When the writer
+is finished writing data into that position, it commits the write.
+
+Another write (or a read) may take place at anytime during this
+transaction. If another write happens it must finish before continuing
+with the previous write.
+
+
+ Write reserve:
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+ <--- given back to writer (current commit)
+ |reserved |
+ +---------+ <--- tail pointer
+ | empty |
+ +---------+
+
+ Write commit:
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+
+ |written |
+ +---------+ <--- next positon for write (current commit)
+ | empty |
+ +---------+
+
+
+ If a write happens after the first reserve:
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+ <-- current commit
+ |reserved |
+ +---------+ <--- given back to second writer
+ |reserved |
+ +---------+ <--- tail pointer
+
+ After second writer commits:
+
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+ <--(last full commit)
+ |reserved |
+ +---------+
+ |pending |
+ |commit |
+ +---------+ <--- tail pointer
+
+ When the first writer commits:
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+
+ |written |
+ +---------+
+ |written |
+ +---------+ <--(last full commit and tail pointer)
+
+
+The commit pointer points to the last write location that was
+committed without preempting another write. When a write that
+preempted another write is committed, it only becomes a pending commit
+and will not be a full commit till all writes have been committed.
+
+The commit page points to the page that has the last full commit.
+The tail page points to the page with the last write (before
+committing).
+
+The tail page is always equal to or after the commit page. It may
+be several pages ahead. If the tail page catches up to the commit
+page then no more writes may take place (regardless of the mode
+of the ring buffer: overwrite and produce/consumer).
+
+The order of pages are:
+
+ head page
+ commit page
+ tail page
+
+Possible scenario:
+ tail page
+ head page commit page |
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+There is a special case that the head page is after either the commit page
+and possibly the tail page. That is when the commit (and tail) page has been
+swapped with the reader page. This is because the head page is always
+part of the ring buffer, but the reader page is not. When ever there
+has been less than a full page that has been committed inside the ring buffer,
+and a reader swaps out a page, it will be swapping out the commit page.
+
+
+ reader page commit page tail page
+ | | |
+ v | |
+ +---+ | |
+ | |<----------+ |
+ | |<------------------------+
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+
+In this case, the head page will not move when the tail and commit
+move back into the ring buffer.
+
+The reader can not swap a page into the ring buffer if the commit page
+is still on that page. If the read meets the last commit (real commit
+not pending or reserved), then there is nothing more to read.
+The buffer is considered empty until another full commit finishes.
+
+When the tail meets the head page, if the buffer is in overwrite mode,
+the head page will be pushed ahead one. If the buffer is in producer/consumer
+mode, the write will fail.
+
+Overwrite mode:
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+Note, the reader page will still point to the previous head page.
+But when a swap takes place, it will use the most recent head page.
+
+
+Making the Ring Buffer Lockless:
+--------------------------------
+
+The main idea behind the lockless algorithm is to combine the moving
+of the head_page pointer with the swapping of pages with the reader.
+State flags are placed inside the pointer to the page. To do this,
+each page must be aligned in memory by 4 bytes. This will allow the 2
+least significant bits of the address to be used as flags. Since
+they will always be zero for the address. To get the address,
+simply mask out the flags.
+
+ MASK = ~3
+
+ address & MASK
+
+Two flags will be kept by these two bits:
+
+ HEADER - the page being pointed to is a head page
+
+ UPDATE - the page being pointed to is being updated by a writer
+ and was or is about to be a head page.
+
+
+ reader page
+ |
+ v
+ +---+
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-H->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+The above pointer "-H->" would have the HEADER flag set. That is
+the next page is the next page to be swapped out by the reader.
+This pointer means the next page is the head page.
+
+When the tail page meets the head pointer, it will use cmpxchg to
+change the pointer to the UPDATE state:
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-H->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+"-U->" represents a pointer in the UPDATE state.
+
+Any access to the reader will need to take some sort of lock to serialize
+the readers. But the writers will never take a lock to write to the
+ring buffer. This means we only need to worry about a single reader,
+and writes only preempt in "stack" formation.
+
+When the reader tries to swap the page with the ring buffer, it
+will also use cmpxchg. If the flag bit in the pointer to the
+head page does not have the HEADER flag set, the compare will fail
+and the reader will need to look for the new head page and try again.
+Note, the flag UPDATE and HEADER are never set at the same time.
+
+The reader swaps the reader page as follows:
+
+ +------+
+ |reader| RING BUFFER
+ |page |
+ +------+
+ +---+ +---+ +---+
+ | |--->| |--->| |
+ | |<---| |<---| |
+ +---+ +---+ +---+
+ ^ | ^ |
+ | +---------------+ |
+ +-----H-------------+
+
+The reader sets the reader page next pointer as HEADER to the page after
+the head page.
+
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------H-----------+
+ +------+ v
+ | +---+ +---+ +---+
+ | | |--->| |--->| |
+ | | |<---| |<---| |<-+
+ | +---+ +---+ +---+ |
+ | ^ | ^ | |
+ | | +---------------+ | |
+ | +-----H-------------+ |
+ +--------------------------------------+
+
+It does a cmpxchg with the pointer to the previous head page to make it
+point to the reader page. Note that the new pointer does not have the HEADER
+flag set. This action atomically moves the head page forward.
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------H-----------+
+ +------+ v
+ | ^ +---+ +---+ +---+
+ | | | |-->| |-->| |
+ | | | |<--| |<--| |<-+
+ | | +---+ +---+ +---+ |
+ | | | ^ | |
+ | | +-------------+ | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+After the new head page is set, the previous pointer of the head page is
+updated to the reader page.
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------H-----------+
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | |-->| |-->| |
+ | | | | | |<--| |<-+
+ | | +---+ +---+ +---+ |
+ | | | ^ | |
+ | | +-------------+ | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+ +------+
+ |buffer| RING BUFFER
+ |page |-------H-----------+ <--- New head page
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | | | |-->| |
+ | | New | | | |<--| |<-+
+ | | Reader +---+ +---+ +---+ |
+ | | page ----^ | |
+ | | | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+Another important point. The page that the reader page points back to
+by its previous pointer (the one that now points to the new head page)
+never points back to the reader page. That is because the reader page is
+not part of the ring buffer. Traversing the ring buffer via the next pointers
+will always stay in the ring buffer. Traversing the ring buffer via the
+prev pointers may not.
+
+Note, the way to determine a reader page is simply by examining the previous
+pointer of the page. If the next pointer of the previous page does not
+point back to the original page, then the original page is a reader page:
+
+
+ +--------+
+ | reader | next +----+
+ | page |-------->| |<====== (buffer page)
+ +--------+ +----+
+ | | ^
+ | v | next
+ prev | +----+
+ +------------->| |
+ +----+
+
+The way the head page moves forward:
+
+When the tail page meets the head page and the buffer is in overwrite mode
+and more writes take place, the head page must be moved forward before the
+writer may move the tail page. The way this is done is that the writer
+performs a cmpxchg to convert the pointer to the head page from the HEADER
+flag to have the UPDATE flag set. Once this is done, the reader will
+not be able to swap the head page from the buffer, nor will it be able to
+move the head page, until the writer is finished with the move.
+
+This eliminates any races that the reader can have on the writer. The reader
+must spin, and this is why the reader can not preempt the writer.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-H->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The following page will be made into the new head page.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+After the new head page has been set, we can set the old head page
+pointer back to NORMAL.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+After the head page has been moved, the tail page may now move forward.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+The above are the trivial updates. Now for the more complex scenarios.
+
+
+As stated before, if enough writes preempt the first write, the
+tail page may make it all the way around the buffer and meet the commit
+page. At this time, we must start dropping writes (usually with some kind
+of warning to the user). But what happens if the commit was still on the
+reader page? The commit page is not part of the ring buffer. The tail page
+must account for this.
+
+
+ reader page commit page
+ | |
+ v |
+ +---+ |
+ | |<----------+
+ | |
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-H->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ tail page
+
+If the tail page were to simply push the head page forward, the commit when
+leaving the reader page would not be pointing to the correct page.
+
+The solution to this is to test if the commit page is on the reader page
+before pushing the head page. If it is, then it can be assumed that the
+tail page wrapped the buffer, and we must drop new writes.
+
+This is not a race condition, because the commit page can only be moved
+by the outter most writer (the writer that was preempted).
+This means that the commit will not move while a writer is moving the
+tail page. The reader can not swap the reader page if it is also being
+used as the commit page. The reader can simply check that the commit
+is off the reader page. Once the commit page leaves the reader page
+it will never go back on it unless a reader does another swap with the
+buffer page that is also the commit page.
+
+
+Nested writes
+-------------
+
+In the pushing forward of the tail page we must first push forward
+the head page if the head page is the next page. If the head page
+is not the next page, the tail page is simply updated with a cmpxchg.
+
+Only writers move the tail page. This must be done atomically to protect
+against nested writers.
+
+ temp_page = tail_page
+ next_page = temp_page->next
+ cmpxchg(tail_page, temp_page, next_page)
+
+The above will update the tail page if it is still pointing to the expected
+page. If this fails, a nested write pushed it forward, the the current write
+does not need to push it.
+
+
+ temp page
+ |
+ v
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Nested write comes in and moves the tail page forward:
+
+ tail page (moved by nested writer)
+ temp page |
+ | |
+ v v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The above would fail the cmpxchg, but since the tail page has already
+been moved forward, the writer will just try again to reserve storage
+on the new tail page.
+
+But the moving of the head page is a bit more complex.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-H->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The write converts the head page pointer to UPDATE.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+But if a nested writer preempts here. It will see that the next
+page is a head page, but it is also nested. It will detect that
+it is nested and will save that information. The detection is the
+fact that it sees the UPDATE flag instead of a HEADER or NORMAL
+pointer.
+
+The nested writer will set the new head page pointer.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+But it will not reset the update back to normal. Only the writer
+that converted a pointer from HEAD to UPDATE will convert it back
+to NORMAL.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+After the nested writer finishes, the outer most writer will convert
+the UPDATE pointer to NORMAL.
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+It can be even more complex if several nested writes came in and moved
+the tail page ahead several pages:
+
+
+(first writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-H->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The write converts the head page pointer to UPDATE.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Next writer comes in, and sees the update and sets up the new
+head page.
+
+(second writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The nested writer moves the tail page forward. But does not set the old
+update page to NORMAL because it is not the outer most writer.
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Another writer preempts and sees the page after the tail page is a head page.
+It changes it from HEAD to UPDATE.
+
+(third writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-U->| |--->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The writer will move the head page forward:
+
+
+(third writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-U->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+But now that the third writer did change the HEAD flag to UPDATE it
+will convert it to normal:
+
+
+(third writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+Then it will move the tail page, and return back to the second writer.
+
+
+(second writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+The second writer will fail to move the tail page because it was already
+moved, so it will try again and add its data to the new tail page.
+It will return to the first writer.
+
+
+(first writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The first writer can not know atomically test if the tail page moved
+while it updates the HEAD page. It will then update the head page to
+what it thinks is the new head page.
+
+
+(first writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Since the cmpxchg returns the old value of the pointer the first writer
+will see it succeeded in updating the pointer from NORMAL to HEAD.
+But as we can see, this is not good enough. It must also check to see
+if the tail page is either where it use to be or on the next page:
+
+
+(first writer)
+
+ A B tail page
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |-H->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+If tail page != A and tail page does not equal B, then it must reset the
+pointer back to NORMAL. The fact that it only needs to worry about
+nested writers, it only needs to check this after setting the HEAD page.
+
+
+(first writer)
+
+ A B tail page
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+<---| |--->| |-U->| |--->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Now the writer can update the head page. This is also why the head page must
+remain in UPDATE and only reset by the outer most writer. This prevents
+the reader from seeing the incorrect head page.
+
+
+(first writer)
+
+ A B tail page
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+<---| |--->| |--->| |--->| |-H->
+--->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index bb1f5c6..510917f 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -41,6 +41,8 @@
P Poisoning (object and padding)
U User tracking (free and alloc)
T Trace (please only use on single slabs)
+ O Switch debugging off for caches that would have
+ caused higher minimum slab orders
- Switch all debugging off (useful if the kernel is
configured with CONFIG_SLUB_DEBUG_ON)
@@ -59,6 +61,14 @@
slub_debug=F,dentry
+Debugging options may require the minimum possible slab order to increase as
+a result of storing the metadata (for example, caches with PAGE_SIZE object
+sizes). This has a higher liklihood of resulting in slab allocation errors
+in low memory situations or if there's high fragmentation of memory. To
+switch off debugging for such caches by default, use
+
+ slub_debug=O
+
In case you forgot to enable debugging on the kernel command line: It is
possible to enable debugging manually when the kernel is up. Look at the
contents of:
diff --git a/MAINTAINERS b/MAINTAINERS
index e8fabf8..837b598 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -439,7 +439,7 @@
AMSO1100 RNIC DRIVER
M: Tom Tucker <tom@opengridcomputing.com>
M: Steve Wise <swise@opengridcomputing.com>
-L: general@lists.openfabrics.org
+L: linux-rdma@vger.kernel.org
S: Maintained
F: drivers/infiniband/hw/amso1100/
@@ -534,10 +534,30 @@
W: http://maxim.org.za/at91_26.html
S: Maintained
-ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-M: Lennert Buytenhek <kernel@wantstofly.org>
+ARM/BCMRING ARM ARCHITECTURE
+M: Leo Chen <leochen@broadcom.com>
+M: Scott Branden <sbranden@broadcom.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mach-bcmring
+
+ARM/BCMRING MTD NAND DRIVER
+M: Leo Chen <leochen@broadcom.com>
+M: Scott Branden <sbranden@broadcom.com>
+L: linux-mtd@lists.infradead.org
+S: Maintained
+F: drivers/mtd/nand/bcm_umi_nand.c
+F: drivers/mtd/nand/bcm_umi_bch.c
+F: drivers/mtd/nand/bcm_umi_hamming.c
+F: drivers/mtd/nand/nand_bcm_umi.h
+
+ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
+M: Hartley Sweeten <hsweeten@visionengravers.com>
+M: Ryan Mallon <ryan@bluewatersys.com>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+F: arch/arm/mach-ep93xx/
+F: arch/arm/mach-ep93xx/include/mach/
ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
@@ -685,6 +705,18 @@
M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
+ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
+M: Lennert Buytenhek <buytenh@marvell.com>
+M: Nicolas Pitre <nico@marvell.com>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T: git git://git.marvell.com/orion
+S: Maintained
+F: arch/arm/mach-loki/
+F: arch/arm/mach-kirkwood/
+F: arch/arm/mach-mv78xx0/
+F: arch/arm/mach-orion5x/
+F: arch/arm/plat-orion/
+
ARM/MIOA701 MACHINE SUPPORT
M: Robert Jarzmik <robert.jarzmik@free.fr>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -876,6 +908,7 @@
M: Bob Copeland <me@bobcopeland.com>
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
+W: http://wireless.kernel.org/en/users/Drivers/ath5k
S: Maintained
F: drivers/net/wireless/ath/ath5k/
@@ -887,6 +920,7 @@
M: Senthil Balasubramanian <senthilkumar@atheros.com>
L: linux-wireless@vger.kernel.org
L: ath9k-devel@lists.ath9k.org
+W: http://wireless.kernel.org/en/users/Drivers/ath9k
S: Supported
F: drivers/net/wireless/ath/ath9k/
@@ -1494,7 +1528,7 @@
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
M: Steve Wise <swise@chelsio.com>
-L: general@lists.openfabrics.org
+L: linux-rdma@vger.kernel.org
W: http://www.openfabrics.org
S: Supported
F: drivers/infiniband/hw/cxgb3/
@@ -1868,7 +1902,7 @@
EHCA (IBM GX bus InfiniBand adapter) DRIVER
M: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
M: Christoph Raisch <raisch@de.ibm.com>
-L: general@lists.openfabrics.org
+L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/hw/ehca/
@@ -2239,8 +2273,7 @@
F: drivers/media/video/gspca/pac207.c
GSPCA SN9C20X SUBDRIVER
-P: Brian Johnson
-M: brijohn@gmail.com
+M: Brian Johnson <brijohn@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
@@ -2553,7 +2586,7 @@
M: Roland Dreier <rolandd@cisco.com>
M: Sean Hefty <sean.hefty@intel.com>
M: Hal Rosenstock <hal.rosenstock@gmail.com>
-L: general@lists.openfabrics.org (moderated for non-subscribers)
+L: linux-rdma@vger.kernel.org
W: http://www.openib.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
@@ -2661,25 +2694,21 @@
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
M: Zhu Yi <yi.zhu@intel.com>
-M: James Ketrenos <jketreno@linux.intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
+M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
-L: ipw2100-devel@lists.sourceforge.net
-W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2100.sourceforge.net
-S: Supported
+S: Odd Fixes
F: Documentation/networking/README.ipw2100
F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
M: Zhu Yi <yi.zhu@intel.com>
-M: James Ketrenos <jketreno@linux.intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
+M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
-L: ipw2100-devel@lists.sourceforge.net
-W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
-S: Supported
+S: Odd Fixes
F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/ipw2x00/ipw2200.*
@@ -2696,8 +2725,8 @@
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Zhu Yi <yi.zhu@intel.com>
M: Reinette Chatre <reinette.chatre@intel.com>
+M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
-L: ipw3945-devel@lists.sourceforge.net
W: http://intellinuxwireless.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
S: Supported
@@ -2730,7 +2759,7 @@
IPATH DRIVER
M: Ralph Campbell <infinipath@qlogic.com>
-L: general@lists.openfabrics.org
+L: linux-rdma@vger.kernel.org
T: git git://git.qlogic.com/ipath-linux-2.6
S: Supported
F: drivers/infiniband/hw/ipath/
@@ -2929,6 +2958,7 @@
KERNEL VIRTUAL MACHINE (KVM)
M: Avi Kivity <avi@redhat.com>
+M: Marcelo Tosatti <mtosatti@redhat.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
@@ -3280,6 +3310,12 @@
F: drivers/net/mv643xx_eth.*
F: include/linux/mv643xx.h
+MARVELL MWL8K WIRELESS DRIVER
+M: Lennert Buytenhek <buytenh@marvell.com>
+L: linux-wireless@vger.kernel.org
+S: Supported
+F: drivers/net/wireless/mwl8k.c
+
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
M: Nicolas Pitre <nico@cam.org>
S: Maintained
@@ -3486,7 +3522,7 @@
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
M: Chien Tung <chien.tin.tung@intel.com>
-L: general@lists.openfabrics.org
+L: linux-rdma@vger.kernel.org
W: http://www.neteffect.com
S: Supported
F: drivers/infiniband/hw/nes/
@@ -3592,9 +3628,12 @@
L: linux-wireless@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
+F: net/mac80211/
+F: net/rfkill/
F: net/wireless/
F: include/net/ieee80211*
F: include/linux/wireless.h
+F: drivers/net/wireless/
NETWORKING DRIVERS
L: netdev@vger.kernel.org
@@ -4308,7 +4347,7 @@
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
-F: drivers/net/wireless/rtl818*
+F: drivers/net/wireless/rtl818x/rtl8180*
RTL8187 WIRELESS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
@@ -4535,9 +4574,10 @@
F: drivers/net/benet/
SFC NETWORK DRIVER
-P: Steve Hodgson
-P: Ben Hutchings
-M: Robert Stonehouse <linux-net-drivers@solarflare.com>
+M: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
+M: Steve Hodgson <shodgson@solarflare.com>
+M: Ben Hutchings <bhutchings@solarflare.com>
+L: netdev@vger.kernel.org
S: Supported
F: drivers/net/sfc/
@@ -5587,6 +5627,24 @@
S: Maintained
F: drivers/input/misc/wistron_btns.c
+WL1251 WIRELESS DRIVER
+P: Kalle Valo
+M: kalle.valo@nokia.com
+L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S: Maintained
+F: drivers/net/wireless/wl12xx/*
+X: drivers/net/wireless/wl12xx/wl1271*
+
+WL1271 WIRELESS DRIVER
+M: Luciano Coelho <luciano.coelho@nokia.com>
+L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S: Maintained
+F: drivers/net/wireless/wl12xx/wl1271*
+
WL3501 WIRELESS PCMCIA CARD DRIVER
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: linux-wireless@vger.kernel.org
diff --git a/Makefile b/Makefile
index 9c87e60..60de4ef 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = -rc7
+EXTRAVERSION =
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
diff --git a/arch/Kconfig b/arch/Kconfig
index 99193b1..beea3cc 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -30,6 +30,18 @@
If unsure, say N.
+config OPROFILE_EVENT_MULTIPLEX
+ bool "OProfile multiplexing support (EXPERIMENTAL)"
+ default n
+ depends on OPROFILE && X86
+ help
+ The number of hardware counters is limited. The multiplexing
+ feature enables OProfile to gather more events than counters
+ are provided by the hardware. This is realized by switching
+ between events at an user specified time interval.
+
+ If unsure, say N.
+
config HAVE_OPROFILE
bool
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 3641ec1..26773e3 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -32,6 +32,8 @@
#define SO_RCVTIMEO 0x1012
#define SO_SNDTIMEO 0x1013
#define SO_ACCEPTCONN 0x1014
+#define SO_PROTOCOL 0x1028
+#define SO_DOMAIN 0x1029
/* linux-specific, might as well be the same as on i386 */
#define SO_NO_CHECK 11
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 60c83ab..5076a88 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -75,6 +75,7 @@
#define TIF_UAC_SIGBUS 7
#define TIF_MEMDIE 8
#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */
+#define TIF_NOTIFY_RESUME 10 /* callback before returning to user */
#define TIF_FREEZE 16 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -82,10 +83,12 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1<<TIF_FREEZE)
/* Work to do on interrupt/exception return. */
-#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+ _TIF_NOTIFY_RESUME)
/* Work to do on any return to userspace. */
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index df65eaa..0932dbb 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -20,6 +20,7 @@
#include <linux/binfmts.h>
#include <linux/bitops.h>
#include <linux/syscalls.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/sigcontext.h>
@@ -683,4 +684,11 @@
{
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, sw, r0, r19);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8..d778a69 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@
depends on GENERIC_CLOCKEVENTS
default y if SMP && !LOCAL_TIMERS
-config MMU
- bool
- default y
-
config NO_IOPORT
bool
@@ -126,6 +122,13 @@
config ARCH_HAS_ILOG2_U64
bool
+config ARCH_HAS_CPUFREQ
+ bool
+ help
+ Internal node to signify that the ARCH has CPUFREQ support
+ and that the relevant menu configurations are displayed for
+ it.
+
config GENERIC_HWEIGHT
bool
default y
@@ -188,6 +191,13 @@
menu "System Type"
+config MMU
+ bool "MMU-based Paged Memory Management Support"
+ default y
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management. If unsure, say 'Y'.
+
choice
prompt "ARM system type"
default ARCH_VERSATILE
@@ -203,6 +213,7 @@
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
@@ -217,6 +228,7 @@
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd RealView boards.
@@ -229,6 +241,7 @@
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd Versatile board.
@@ -327,6 +340,20 @@
help
This enables support for systems based on the Hynix HMS720x
+config ARCH_NOMADIK
+ bool "STMicroelectronics Nomadik"
+ select ARM_AMBA
+ select ARM_VIC
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Nomadik platform by ST-Ericsson
+
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
@@ -493,10 +520,18 @@
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select GENERIC_GPIO
+ select HAVE_CLK
select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+ At present, the w90x900 has been renamed nuc900, regarding
+ the ARM series product line, you can login the following
+ link address to know more.
+
+ <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
@@ -509,6 +544,7 @@
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
@@ -551,6 +587,7 @@
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@@ -563,6 +600,7 @@
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -573,9 +611,18 @@
bool "Samsung S3C64XX"
select GENERIC_GPIO
select HAVE_CLK
+ select ARCH_HAS_CPUFREQ
help
Samsung S3C64XX series based systems
+config ARCH_S5PC1XX
+ bool "Samsung S5PC1XX"
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select CPU_V7
+ help
+ Samsung S5PC1XX series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -632,11 +679,24 @@
select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_BCMRING
+ bool "Broadcom BCMRING"
+ depends on MMU
+ select CPU_V6
+ select ARM_AMBA
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ help
+ Support for Broadcom's BCMRing platform.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -685,6 +745,7 @@
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
@@ -702,6 +763,10 @@
source "arch/arm/plat-stmp3xxx/Kconfig"
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
@@ -716,6 +781,8 @@
source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
@@ -730,6 +797,8 @@
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-bcmring/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -962,18 +1031,7 @@
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
-config PREEMPT
- bool "Preemptible Kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say Y here if you are building a kernel for a desktop, embedded
- or real-time system. Say N if you are unsure.
+source kernel/Kconfig.preempt
config HZ
int
@@ -983,6 +1041,21 @@
default AT91_TIMER_HZ if ARCH_AT91
default 100
+config THUMB2_KERNEL
+ bool "Compile the kernel in Thumb-2 mode"
+ depends on CPU_V7 && EXPERIMENTAL
+ select AEABI
+ select ARM_ASM_UNIFIED
+ help
+ By enabling this option, the kernel will be compiled in
+ Thumb-2 mode. A compiler/assembler that understand the unified
+ ARM-Thumb syntax is needed.
+
+ If unsure, say N.
+
+config ARM_ASM_UNIFIED
+ bool
+
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
@@ -1054,6 +1127,11 @@
If unsure, say n.
+config HIGHPTE
+ bool "Allocate 2nd-level pagetables from highmem"
+ depends on HIGHMEM
+ depends on !OUTER_CACHE
+
source "mm/Kconfig"
config LEDS
@@ -1241,7 +1319,7 @@
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
@@ -1276,6 +1354,52 @@
bool "CPUfreq support for Samsung S3C64XX CPUs"
depends on CPU_FREQ && CPU_S3C6410
+config CPU_FREQ_S3C
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+ depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+ select CPU_FREQ_S3C
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency"
+ depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on CPU_FREQ_S3C24XX && DEBUG_FS
+ help
+ Export status information via debugfs.
+
endif
source "drivers/cpuidle/Kconfig"
@@ -1377,107 +1501,7 @@
source "net/Kconfig"
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
source "fs/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e473..1a6f70e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
+ depends on !THUMB2_KERNEL
default y if !ARM_UNWIND
help
If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6d..7350557 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@
CFLAGS_ABI +=-funwind-tables
endif
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
# Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
CHECKFLAGS += -D__arm__
@@ -112,6 +119,7 @@
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
@@ -135,8 +143,10 @@
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_NETX) := netx
+machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
@@ -150,6 +160,7 @@
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
@@ -158,6 +169,7 @@
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
+machine-$(CONFIG_ARCH_MXC91231) := mxc91231
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
@@ -168,6 +180,7 @@
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abc..4a590f4 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
- -C none -a $(LOADADDR) -e $(LOADADDR) \
+ -C none -a $(LOADADDR) -e $(STARTADDR) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
@echo ' Image $@ is ready'
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728..fa6fbf4 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@
tst r2, #3 @ not user?
bne not_angel
mov r0, #0x17 @ angel_SWIreason_EnterSVC
- swi 0x123456 @ angel_SWI_ARM
+ ARM( swi 0x123456 ) @ angel_SWI_ARM
+ THUMB( svc 0xab ) @ angel_SWI_THUMB
not_angel:
mrs r2, cpsr @ turn off interrupts to
orr r2, r2, #0xc0 @ prevent angel from running
@@ -161,7 +162,9 @@
.text
adr r0, LC0
- ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} )
+ THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, ip} )
+ THUMB( ldr sp, [r0, #28] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are
@@ -263,22 +266,25 @@
* r6 = processor ID
* r7 = architecture ID
* r8 = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
*/
add r1, r5, r0 @ end of decompressed kernel
adr r2, reloc_start
ldr r3, LC1
add r3, r2, r3
-1: ldmia r2!, {r9 - r14} @ copy relocation code
- stmia r1!, {r9 - r14}
- ldmia r2!, {r9 - r14}
- stmia r1!, {r9 - r14}
+1: ldmia r2!, {r9 - r12, r14} @ copy relocation code
+ stmia r1!, {r9 - r12, r14}
+ ldmia r2!, {r9 - r12, r14}
+ stmia r1!, {r9 - r12, r14}
cmp r2, r3
blo 1b
- add sp, r1, #128 @ relocate the stack
+ mov sp, r1
+ add sp, sp, #128 @ relocate the stack
bl cache_clean_flush
- add pc, r5, r0 @ call relocation code
+ ARM( add pc, r5, r0 ) @ call relocation code
+ THUMB( add r12, r5, r0 )
+ THUMB( mov pc, r12 ) @ call relocation code
/*
* We're not in danger of overwriting ourselves. Do this the simple way.
@@ -291,6 +297,7 @@
bl decompress_kernel
b call_kernel
+ .align 2
.type LC0, #object
LC0: .word LC0 @ r1
.word __bss_start @ r2
@@ -431,6 +438,7 @@
__armv4_mmu_cache_on:
mov r12, lr
+#ifdef CONFIG_MMU
bl __setup_mmu
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
@@ -444,10 +452,12 @@
bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+#endif
mov pc, r12
__armv7_mmu_cache_on:
mov r12, lr
+#ifdef CONFIG_MMU
mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
tst r11, #0xf @ VMSA
blne __setup_mmu
@@ -455,9 +465,11 @@
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
tst r11, #0xf @ VMSA
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+#endif
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
+#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
@@ -465,6 +477,7 @@
movne r1, #-1
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+#endif
mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back
mov r0, #0
@@ -498,6 +511,7 @@
mov pc, r12
__common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
#ifndef DEBUG
orr r0, r0, #0x000d @ Write buffer, mmu
#endif
@@ -509,6 +523,7 @@
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
sub pc, lr, r0, lsr #32 @ properly flush pipeline
+#endif
/*
* All code following this line is relocatable. It is relocated by
@@ -522,7 +537,7 @@
* r6 = processor ID
* r7 = architecture ID
* r8 = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
*/
.align 5
reloc_start: add r9, r5, r0
@@ -531,13 +546,14 @@
mov r1, r4
1:
.rept 4
- ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel
- stmia r1!, {r0, r2, r3, r10 - r14}
+ ldmia r5!, {r0, r2, r3, r10 - r12, r14} @ relocate kernel
+ stmia r1!, {r0, r2, r3, r10 - r12, r14}
.endr
cmp r5, r9
blo 1b
- add sp, r1, #128 @ relocate the stack
+ mov sp, r1
+ add sp, sp, #128 @ relocate the stack
debug_reloc_end
call_kernel: bl cache_clean_flush
@@ -571,7 +587,9 @@
ldr r2, [r12, #4] @ get mask
eor r1, r1, r6 @ (real ^ match)
tst r1, r2 @ & mask
- addeq pc, r12, r3 @ call cache function
+ ARM( addeq pc, r12, r3 ) @ call cache function
+ THUMB( addeq r12, r3 )
+ THUMB( moveq pc, r12 ) @ call cache function
add r12, r12, #4*5
b 1b
@@ -589,13 +607,15 @@
* methods. Writeback caches _must_ have the flush method
* defined.
*/
+ .align 2
.type proc_types,#object
proc_types:
.word 0x41560600 @ ARM6/610
.word 0xffffffe0
- b __arm6_mmu_cache_off @ works, but slow
- b __arm6_mmu_cache_off
+ W(b) __arm6_mmu_cache_off @ works, but slow
+ W(b) __arm6_mmu_cache_off
mov pc, lr
+ THUMB( nop )
@ b __arm6_mmu_cache_on @ untested
@ b __arm6_mmu_cache_off
@ b __armv3_mmu_cache_flush
@@ -603,76 +623,84 @@
.word 0x00000000 @ old ARM ID
.word 0x0000f000
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
.word 0x41007000 @ ARM7/710
.word 0xfff8fe00
- b __arm7_mmu_cache_off
- b __arm7_mmu_cache_off
+ W(b) __arm7_mmu_cache_off
+ W(b) __arm7_mmu_cache_off
mov pc, lr
+ THUMB( nop )
.word 0x41807200 @ ARM720T (writethrough)
.word 0xffffff00
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
mov pc, lr
+ THUMB( nop )
.word 0x41007400 @ ARM74x
.word 0xff00ff00
- b __armv3_mpu_cache_on
- b __armv3_mpu_cache_off
- b __armv3_mpu_cache_flush
+ W(b) __armv3_mpu_cache_on
+ W(b) __armv3_mpu_cache_off
+ W(b) __armv3_mpu_cache_flush
.word 0x41009400 @ ARM94x
.word 0xff00ff00
- b __armv4_mpu_cache_on
- b __armv4_mpu_cache_off
- b __armv4_mpu_cache_flush
+ W(b) __armv4_mpu_cache_on
+ W(b) __armv4_mpu_cache_off
+ W(b) __armv4_mpu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
@ Everything from here on will be the new ID system.
.word 0x4401a100 @ sa110 / sa1100
.word 0xffffffe0
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x6901b110 @ sa1110
.word 0xfffffff0
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x56056930
.word 0xff0ffff0 @ PXA935
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x56158000 @ PXA168
.word 0xfffff000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
.word 0x56056930
.word 0xff0ffff0 @ PXA935
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x56050000 @ Feroceon
.word 0xff0f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
#ifdef CONFIG_CPU_FEROCEON_OLD_ID
/* this conflicts with the standard ARMv5TE entry */
@@ -685,47 +713,50 @@
.word 0x66015261 @ FA526
.word 0xff01fff1
- b __fa526_cache_on
- b __armv4_mmu_cache_off
- b __fa526_cache_flush
+ W(b) __fa526_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __fa526_cache_flush
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
.word 0x000f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x00050000 @ ARMv5TE
.word 0x000f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x00060000 @ ARMv5TEJ
.word 0x000f0000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv4_mmu_cache_flush
.word 0x0007b000 @ ARMv6
.word 0x000ff000
- b __armv4_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv6_mmu_cache_flush
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv6_mmu_cache_flush
.word 0x000f0000 @ new CPU Id
.word 0x000f0000
- b __armv7_mmu_cache_on
- b __armv7_mmu_cache_off
- b __armv7_mmu_cache_flush
+ W(b) __armv7_mmu_cache_on
+ W(b) __armv7_mmu_cache_off
+ W(b) __armv7_mmu_cache_flush
.word 0 @ unrecognised type
.word 0
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
mov pc, lr
+ THUMB( nop )
.size proc_types, . - proc_types
@@ -760,22 +791,30 @@
mov pc, lr
__armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
+#endif
mov pc, lr
__armv7_mmu_cache_off:
mrc p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
bic r0, r0, #0x000d
+#else
+ bic r0, r0, #0x000c
+#endif
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mov r12, lr
bl __armv7_mmu_cache_flush
mov r0, #0
+#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
+#endif
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC
mcr p15, 0, r0, c7, c10, 4 @ DSB
mcr p15, 0, r0, c7, c5, 4 @ ISB
@@ -852,7 +891,7 @@
b iflush
hierarchical:
mcr p15, 0, r10, c7, c10, 5 @ DMB
- stmfd sp!, {r0-r5, r7, r9, r11}
+ stmfd sp!, {r0-r7, r9-r11}
mrc p15, 1, r0, c0, c0, 1 @ read clidr
ands r3, r0, #0x7000000 @ extract loc from clidr
mov r3, r3, lsr #23 @ left align loc bit field
@@ -877,8 +916,12 @@
loop2:
mov r9, r4 @ create working copy of max way size
loop3:
- orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
- orr r11, r11, r7, lsl r2 @ factor index number into r11
+ ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
+ ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
+ THUMB( lsl r6, r9, r5 )
+ THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
+ THUMB( lsl r6, r7, r2 )
+ THUMB( orr r11, r11, r6 ) @ factor index number into r11
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
subs r9, r9, #1 @ decrement the way
bge loop3
@@ -889,7 +932,7 @@
cmp r3, r10
bgt loop1
finished:
- ldmfd sp!, {r0-r5, r7, r9, r11}
+ ldmfd sp!, {r0-r7, r9-r11}
mov r10, #0 @ swith back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
iflush:
@@ -923,9 +966,13 @@
mov r11, #8
mov r11, r11, lsl r3 @ cache line size in bytes
no_cache_id:
- bic r1, pc, #63 @ align to longest cache line
+ mov r1, pc
+ bic r1, r1, #63 @ align to longest cache line
add r2, r1, r2
-1: ldr r3, [r1], r11 @ s/w flush D cache
+1:
+ ARM( ldr r3, [r1], r11 ) @ s/w flush D cache
+ THUMB( ldr r3, [r1] ) @ s/w flush D cache
+ THUMB( add r1, r1, r11 )
teq r1, r2
bne 1b
@@ -945,6 +992,7 @@
* memory, which again must be relocatable.
*/
#ifdef DEBUG
+ .align 2
.type phexbuf,#object
phexbuf: .space 12
.size phexbuf, . - phexbuf
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed8983..920ced0 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,10 +22,20 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
+static void vic_ack_irq(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+ /* moreover, clear the soft-triggered, in case it was the reason */
+ writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
static void vic_mask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
@@ -253,12 +263,16 @@
static struct irq_chip vic_chip = {
.name = "VIC",
- .ack = vic_mask_irq,
+ .ack = vic_ack_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
.set_wake = vic_set_wake,
};
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources);
+
/**
* vic_init - initialise a vectored interrupt controller
* @base: iomem base address
@@ -270,6 +284,28 @@
u32 vic_sources, u32 resume_sources)
{
unsigned int i;
+ u32 cellid = 0;
+ enum amba_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
+ }
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case AMBA_VENDOR_ST:
+ vik_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case AMBA_VENDOR_ARM:
+ break;
+ }
/* Disable all interrupts initially. */
@@ -306,3 +342,60 @@
vic_pm_register(base, irq_start, resume_sources);
}
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ * and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources)
+{
+ unsigned int i;
+ int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts. The vector registers
+ * in this cell are after the second block of general registers,
+ * so we can address them using standard offsets, but only from
+ * the second base address, which is 0x20 in the page
+ */
+ if (vic_2nd_block) {
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+ /* ST has 16 vectors as well, but we don't enable them by now */
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(0, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+ }
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+}
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 0000000..bcc0bac
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 0000000..601e7f3
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 0000000..b5b9cbb
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 0000000..4901827
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index f3074e4..df9bfbe 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -44,10 +41,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -56,9 +62,11 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -87,30 +100,25 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -126,7 +134,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -136,14 +144,15 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
#
# SA11x0 Implementations
@@ -189,14 +200,6 @@
CONFIG_SA1100_SSP=y
#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
# Processor Type
#
CONFIG_CPU_32=y
@@ -215,8 +218,8 @@
#
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
CONFIG_FORCE_MAX_ZONEORDER=9
#
@@ -246,30 +249,36 @@
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -281,9 +290,10 @@
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -294,12 +304,14 @@
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -431,14 +448,17 @@
CONFIG_SA1100_FIR=m
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -464,29 +484,34 @@
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@@ -513,8 +538,34 @@
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -523,17 +574,27 @@
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -565,20 +626,23 @@
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -624,11 +688,12 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -650,6 +715,10 @@
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
@@ -663,12 +732,14 @@
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -676,6 +747,7 @@
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -712,6 +769,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@
# CONFIG_FB_SA1100 is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
#
# Display device support
@@ -757,6 +825,8 @@
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -794,15 +867,10 @@
#
CONFIG_RTC_DRV_SA1100=y
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -811,12 +879,16 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -826,6 +898,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -846,14 +923,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@@ -935,12 +1012,16 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0a1abb9..af74cc2 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -629,7 +629,7 @@
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 0000000..9bb45b9
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 0000000..b0d7d3d
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul 1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a09..00f46d9 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
* Enable and disable interrupts
*/
#if __LINUX_ARM_ARCH__ >= 6
- .macro disable_irq
+ .macro disable_irq_notrace
cpsid i
.endm
- .macro enable_irq
+ .macro enable_irq_notrace
cpsie i
.endm
#else
- .macro disable_irq
+ .macro disable_irq_notrace
msr cpsr_c, #PSR_I_BIT | SVC_MODE
.endm
- .macro enable_irq
+ .macro enable_irq_notrace
msr cpsr_c, #SVC_MODE
.endm
#endif
+ .macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ stmdb sp!, {r0-r3, ip, lr}
+ bl trace_hardirqs_off
+ ldmia sp!, {r0-r3, ip, lr}
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ /*
+ * actually the registers should be pushed and pop'd conditionally, but
+ * after bl the flags are certainly clobbered
+ */
+ stmdb sp!, {r0-r3, ip, lr}
+ bl\cond trace_hardirqs_on
+ ldmia sp!, {r0-r3, ip, lr}
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on
+ asm_trace_hardirqs_on_cond al
+ .endm
+
+ .macro disable_irq
+ disable_irq_notrace
+ asm_trace_hardirqs_off
+ .endm
+
+ .macro enable_irq
+ asm_trace_hardirqs_on
+ enable_irq_notrace
+ .endm
/*
* Save the current IRQ state and disable IRQs. Note that this macro
* assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
*/
- .macro restore_irqs, oldcpsr
+ .macro restore_irqs_notrace, oldcpsr
msr cpsr_c, \oldcpsr
.endm
+ .macro restore_irqs, oldcpsr
+ tst \oldcpsr, #PSR_I_BIT
+ asm_trace_hardirqs_on_cond eq
+ restore_irqs_notrace \oldcpsr
+ .endm
+
#define USER(x...) \
9999: x; \
.section __ex_table,"a"; \
@@ -127,3 +166,87 @@
#endif
#endif
.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+ .macro setmode, mode, reg
+ mov \reg, #\mode
+ msr cpsr_c, \reg
+ .endm
+#else
+ .macro setmode, mode, reg
+ msr cpsr_c, #\mode
+ .endm
+#endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+ .macro usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+ .if \inc == 1
+ \instr\cond\()bt \reg, [\ptr, #\off]
+ .elseif \inc == 4
+ \instr\cond\()t \reg, [\ptr, #\off]
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .section __ex_table,"a"
+ .align 3
+ .long 9999b, \abort
+ .previous
+ .endm
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ @ explicit IT instruction needed because of the label
+ @ introduced by the USER macro
+ .ifnc \cond,al
+ .if \rept == 1
+ itt \cond
+ .elseif \rept == 2
+ ittt \cond
+ .else
+ .error "Unsupported rept macro argument"
+ .endif
+ .endif
+
+ @ Slightly optimised to avoid incrementing the pointer twice
+ usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+ .if \rept == 2
+ usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+ .endif
+
+ add\cond \ptr, #\rept * \inc
+ .endm
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ .rept \rept
+9999:
+ .if \inc == 1
+ \instr\cond\()bt \reg, [\ptr], #\inc
+ .elseif \inc == 4
+ \instr\cond\()t \reg, [\ptr], #\inc
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .section __ex_table,"a"
+ .align 3
+ .long 9999b, \abort
+ .previous
+ .endr
+ .endm
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+ .macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+ usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+ usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504..c3b911e 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@
#define R_ARM_MOVW_ABS_NC 43
#define R_ARM_MOVT_ABS 44
+#define R_ARM_THM_CALL 10
+#define R_ARM_THM_JUMP24 30
+
/*
* These are used to set parameters in the core dumps.
*/
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1..103f7ee 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,8 +7,43 @@
#ifndef __ASSEMBLY__
extern void mcount(void);
+extern void __gnu_mcount_nc(void);
#endif
#endif
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work. If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information. For this to work in the function tracer many functions would
+ * have to be marked with __notrace. So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
#endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b..bfcc159 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@
__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
"1: ldrt %0, [%3]\n"
" teq %0, %1\n"
+ " it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
" .section __ex_table,\"a\"\n"
diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b..b490ecc 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@
unsigned int ocr_mask; /* available voltages */
u32 (*translate_vdd)(struct device *, unsigned int);
unsigned int (*status)(struct device *);
+ int gpio_wp;
+ int gpio_cd;
};
#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db..cefedf0 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
+#ifndef CONFIG_THUMB2_KERNEL
#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR (PAGE_OFFSET - 8*1024*1024)
+#endif
+
#if TASK_SIZE > MODULES_VADDR
#error Top of user space clashes with start of module space
#endif
@@ -212,7 +218,6 @@
*
* page_to_pfn(page) convert a struct page * to a PFN number
* pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
- * pfn_valid(pfn) indicates whether a PFN number is valid
*
* virt_to_page(k) convert a _valid_ virtual address to struct page *
* virt_addr_valid(k) indicates whether a virtual address is valid
@@ -221,10 +226,6 @@
#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
@@ -241,18 +242,6 @@
#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn)
#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-#define pfn_valid(pfn) \
- ({ \
- unsigned int nid = PFN_TO_NID(pfn); \
- int valid = nid < MAX_NUMNODES; \
- if (valid) { \
- pg_data_t *node = NODE_DATA(nid); \
- valid = (pfn - node->node_start_pfn) < \
- node->node_spanned_pages; \
- } \
- valid; \
- })
-
#define virt_to_page(kaddr) \
(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed0..bcdb929 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@
static inline void check_context(struct mm_struct *mm)
{
+#ifdef CONFIG_MMU
if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
__check_kvm_seq(mm);
+#endif
}
#define init_new_context(tsk,mm) 0
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0d..d1b162a 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@
#define __pmd(x) (x)
#define __pgprot(x) (x)
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
#endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 9c746af..3a32af4 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -194,6 +194,10 @@
typedef struct page *pgtable_t;
+#ifndef CONFIG_SPARSEMEM
+extern int pfn_valid(unsigned long);
+#endif
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64b..b12cc98 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@
#define pgd_alloc(mm) get_pgd_slow(mm)
#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
/*
* Allocate one PTE table.
*
@@ -57,7 +59,7 @@
{
pte_t *pte;
- pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ pte = (pte_t *)__get_free_page(PGALLOC_GFP);
if (pte) {
clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@
{
struct page *pte;
- pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+ pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
if (pte) {
- void *page = page_address(pte);
- clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ if (!PageHighMem(pte)) {
+ void *page = page_address(pte);
+ clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ }
pgtable_page_ctor(pte);
}
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c433c6c..201ccaa 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,10 +162,8 @@
* entries are stored 1024 bytes below.
*/
#define L_PTE_PRESENT (1 << 0)
-#define L_PTE_FILE (1 << 1) /* only when !PRESENT */
#define L_PTE_YOUNG (1 << 1)
-#define L_PTE_BUFFERABLE (1 << 2) /* obsolete, matches PTE */
-#define L_PTE_CACHEABLE (1 << 3) /* obsolete, matches PTE */
+#define L_PTE_FILE (1 << 2) /* only when !PRESENT */
#define L_PTE_DIRTY (1 << 6)
#define L_PTE_WRITE (1 << 7)
#define L_PTE_USER (1 << 8)
@@ -264,10 +262,19 @@
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
+
+#define pte_offset_map(dir,addr) (__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr) (__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte) __pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte) __pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km) pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km) do { } while (0)
+#else
+#define __pte_map(dir,km) ((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km) kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
@@ -381,13 +388,13 @@
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * <--------------- offset --------------------> <--- type --> 0 0
+ * <--------------- offset --------------------> <- type --> 0 0 0
*
- * This gives us up to 127 swap files and 32GB per swap file. Note that
+ * This gives us up to 63 swap files and 32GB per swap file. Note that
* the offset field is always non-zero.
*/
-#define __SWP_TYPE_SHIFT 2
-#define __SWP_TYPE_BITS 7
+#define __SWP_TYPE_SHIFT 3
+#define __SWP_TYPE_BITS 6
#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
@@ -411,13 +418,13 @@
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * <------------------------ offset -------------------------> 1 0
+ * <----------------------- offset ------------------------> 1 0 0
*/
#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 3)
+#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE)
-#define PTE_FILE_MAX_BITS 30
+#define PTE_FILE_MAX_BITS 29
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
/* FIXME: this is not correct */
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c..bbecccd 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
#define PSR_ENDSTATE 0
#endif
+/*
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR 0x10000
+#define PT_DATA_ADDR 0x10004
+#define PT_TEXT_END_ADDR 0x10008
+
#ifndef __ASSEMBLY__
/*
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 537de4e..92ac61d 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -57,4 +57,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e5..2dfb7d7 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -130,23 +130,28 @@
* TIF_SYSCALL_TRACE - syscall trace active
* TIF_SIGPENDING - signal pending
* TIF_NEED_RESCHED - rescheduling necessary
+ * TIF_NOTIFY_RESUME - callback before returning to user
* TIF_USEDFPU - FPU was used by this task this quantum (SMP)
* TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED
*/
#define TIF_SIGPENDING 0
#define TIF_NEED_RESCHED 1
+#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18
#define TIF_FREEZE 19
+#define TIF_RESTORE_SIGMASK 20
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9..1d6bd40 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
#include <asm/memory.h>
#include <asm/domain.h>
#include <asm/system.h>
+#include <asm/unified.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -365,8 +366,10 @@
#define __put_user_asm_dword(x,__pu_addr,err) \
__asm__ __volatile__( \
- "1: strt " __reg_oper1 ", [%1], #4\n" \
- "2: strt " __reg_oper0 ", [%1]\n" \
+ ARM( "1: strt " __reg_oper1 ", [%1], #4\n" ) \
+ ARM( "2: strt " __reg_oper0 ", [%1]\n" ) \
+ THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
+ THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 0000000..073e85b
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+ .syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...) x
+#define W(instr) instr.w
+#define BSYM(sym) sym + 1
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE 0
+
+#define ARM(x...) x
+#define THUMB(x...)
+#define W(instr) instr
+#define BSYM(sym) sym
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+ .macro it, cond
+ .endm
+ .macro itt, cond
+ .endm
+ .macro ite, cond
+ .endm
+ .macro ittt, cond
+ .endm
+ .macro itte, cond
+ .endm
+ .macro itet, cond
+ .endm
+ .macro itee, cond
+ .endm
+ .macro itttt, cond
+ .endm
+ .macro ittte, cond
+ .endm
+ .macro ittet, cond
+ .endm
+ .macro ittee, cond
+ .endm
+ .macro itett, cond
+ .endm
+ .macro itete, cond
+ .endm
+ .macro iteet, cond
+ .endm
+ .macro iteee, cond
+ .endm
+#else /* !__ASSEMBLY__ */
+__asm__(
+" .macro it, cond\n"
+" .endm\n"
+" .macro itt, cond\n"
+" .endm\n"
+" .macro ite, cond\n"
+" .endm\n"
+" .macro ittt, cond\n"
+" .endm\n"
+" .macro itte, cond\n"
+" .endm\n"
+" .macro itet, cond\n"
+" .endm\n"
+" .macro itee, cond\n"
+" .endm\n"
+" .macro itttt, cond\n"
+" .endm\n"
+" .macro ittte, cond\n"
+" .endm\n"
+" .macro ittet, cond\n"
+" .endm\n"
+" .macro ittee, cond\n"
+" .endm\n"
+" .macro itett, cond\n"
+" .endm\n"
+" .macro itete, cond\n"
+" .endm\n"
+" .macro iteet, cond\n"
+" .endm\n"
+" .macro iteee, cond\n"
+" .endm\n");
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_ARM_ASM_UNIFIED */
+
+#endif /* !__ASM_UNIFIED_H */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8c..9122c9e 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
- /* 335 for pselect6 */
- /* 336 for ppoll */
+#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
+#define __NR_ppoll (__NR_SYSCALL_BASE+336)
#define __NR_unshare (__NR_SYSCALL_BASE+337)
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
- /* 346 for epoll_pwait */
+#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
#define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b..3213c93 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@
CFLAGS_REMOVE_ftrace.o = -pg
endif
+CFLAGS_REMOVE_return_address.o = -pg
+
# Object file lists.
obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \
- process.o ptrace.o setup.o signal.o \
+ process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e186..0e62770 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72..ecfa989 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
CALL(sys_ni_syscall) /* was sys_ssetmask */
/* 70 */ CALL(sys_setreuid16)
CALL(sys_setregid16)
- CALL(sys_sigsuspend_wrapper)
+ CALL(sys_sigsuspend)
CALL(sys_sigpending)
CALL(sys_sethostname)
/* 75 */ CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
CALL(sys_rt_sigpending)
CALL(sys_rt_sigtimedwait)
CALL(sys_rt_sigqueueinfo)
- CALL(sys_rt_sigsuspend_wrapper)
+ CALL(sys_rt_sigsuspend)
/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
CALL(sys_chown16)
@@ -344,8 +344,8 @@
CALL(sys_readlinkat)
CALL(sys_fchmodat)
CALL(sys_faccessat)
-/* 335 */ CALL(sys_ni_syscall) /* eventually pselect6 */
- CALL(sys_ni_syscall) /* eventually ppoll */
+/* 335 */ CALL(sys_pselect6)
+ CALL(sys_ppoll)
CALL(sys_unshare)
CALL(sys_set_robust_list)
CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
CALL(sys_vmsplice)
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
- CALL(sys_ni_syscall) /* eventually epoll_pwait */
+ CALL(sys_epoll_pwait)
CALL(sys_kexec_load)
CALL(sys_utimensat)
CALL(sys_signalfd)
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2..769abe1 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@
static int crunch_enabled(u32 devcfg)
{
- return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+ return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
}
static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@
break;
case THREAD_NOTIFY_SWITCH:
- devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+ devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
- devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+ /*
+ * We don't use ep93xx_syscon_swlocked_write() here
+ * because we are on the context switch path and
+ * preemption is already disabled.
+ */
+ devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
}
break;
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43..3d727a8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
- adrne lr, 1b
+ adrne lr, BSYM(1b)
bne asm_do_IRQ
#ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
*/
test_for_ipi r0, r6, r5, lr
movne r0, sp
- adrne lr, 1b
+ adrne lr, BSYM(1b)
bne do_IPI
#ifdef CONFIG_LOCAL_TIMERS
test_for_ltirq r0, r6, r5, lr
movne r0, sp
- adrne lr, 1b
+ adrne lr, BSYM(1b)
bne do_local_timer
#endif
#endif
@@ -70,7 +70,10 @@
*/
.macro inv_entry, reason
sub sp, sp, #S_FRAME_SIZE
- stmib sp, {r1 - lr}
+ ARM( stmib sp, {r1 - lr} )
+ THUMB( stmia sp, {r0 - r12} )
+ THUMB( str sp, [sp, #S_SP] )
+ THUMB( str lr, [sp, #S_LR] )
mov r1, #\reason
.endm
@@ -126,17 +129,24 @@
.macro svc_entry, stack_hole=0
UNWIND(.fnstart )
UNWIND(.save {r0 - pc} )
- sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
+ sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX( str r0, [sp] ) @ temporarily saved
+ SPFIX( mov r0, sp )
+ SPFIX( tst r0, #4 ) @ test original stack alignment
+ SPFIX( ldr r0, [sp] ) @ restored
+#else
SPFIX( tst sp, #4 )
- SPFIX( bicne sp, sp, #4 )
- stmib sp, {r1 - r12}
+#endif
+ SPFIX( subeq sp, sp, #4 )
+ stmia sp, {r1 - r12}
ldmia r0, {r1 - r3}
- add r5, sp, #S_SP @ here for interlock avoidance
+ add r5, sp, #S_SP - 4 @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
- add r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX( addne r0, r0, #4 )
- str r1, [sp] @ save the "real" r0 copied
+ add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX( addeq r0, r0, #4 )
+ str r1, [sp, #-4]! @ save the "real" r0 copied
@ from the exception stack
mov r1, lr
@@ -151,6 +161,8 @@
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
stmia r5, {r0 - r4}
+
+ asm_trace_hardirqs_off
.endm
.align 5
@@ -196,9 +208,8 @@
@
@ restore SPSR and restart the instruction
@
- ldr r0, [sp, #S_PSR]
- msr spsr_cxsf, r0
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ ldr r2, [sp, #S_PSR]
+ svc_exit r2 @ return from exception
UNWIND(.fnend )
ENDPROC(__dabt_svc)
@@ -206,9 +217,6 @@
__irq_svc:
svc_entry
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
#ifdef CONFIG_PREEMPT
get_thread_info tsk
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -225,13 +233,12 @@
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
#endif
- ldr r0, [sp, #S_PSR] @ irqs are already disabled
- msr spsr_cxsf, r0
+ ldr r4, [sp, #S_PSR] @ irqs are already disabled
#ifdef CONFIG_TRACE_IRQFLAGS
- tst r0, #PSR_I_BIT
+ tst r4, #PSR_I_BIT
bleq trace_hardirqs_on
#endif
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ svc_exit r4 @ return from exception
UNWIND(.fnend )
ENDPROC(__irq_svc)
@@ -266,7 +273,7 @@
@ r0 - instruction
@
ldr r0, [r2, #-4]
- adr r9, 1f
+ adr r9, BSYM(1f)
bl call_fpe
mov r0, sp @ struct pt_regs *regs
@@ -280,9 +287,8 @@
@
@ restore SPSR and restart the instruction
@
- ldr lr, [sp, #S_PSR] @ Get SVC cpsr
- msr spsr_cxsf, lr
- ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ ldr r2, [sp, #S_PSR] @ Get SVC cpsr
+ svc_exit r2 @ return from exception
UNWIND(.fnend )
ENDPROC(__und_svc)
@@ -323,9 +329,8 @@
@
@ restore SPSR and restart the instruction
@
- ldr r0, [sp, #S_PSR]
- msr spsr_cxsf, r0
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ ldr r2, [sp, #S_PSR]
+ svc_exit r2 @ return from exception
UNWIND(.fnend )
ENDPROC(__pabt_svc)
@@ -353,7 +358,8 @@
UNWIND(.fnstart )
UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
- stmib sp, {r1 - r12}
+ ARM( stmib sp, {r1 - r12} )
+ THUMB( stmia sp, {r0 - r12} )
ldmia r0, {r1 - r3}
add r0, sp, #S_PC @ here for interlock avoidance
@@ -372,7 +378,8 @@
@ Also, separately save sp_usr and lr_usr
@
stmia r0, {r2 - r4}
- stmdb r0, {sp, lr}^
+ ARM( stmdb r0, {sp, lr}^ )
+ THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
@
@ Enable the alignment trap while in kernel mode
@@ -383,6 +390,8 @@
@ Clear FP to mark the first stack frame
@
zero_fp
+
+ asm_trace_hardirqs_off
.endm
.macro kuser_cmpxchg_check
@@ -427,7 +436,7 @@
@
enable_irq
mov r2, sp
- adr lr, ret_from_exception
+ adr lr, BSYM(ret_from_exception)
b do_DataAbort
UNWIND(.fnend )
ENDPROC(__dabt_usr)
@@ -437,9 +446,6 @@
usr_entry
kuser_cmpxchg_check
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -452,7 +458,9 @@
ldr r0, [tsk, #TI_PREEMPT]
str r8, [tsk, #TI_PREEMPT]
teq r0, r7
- strne r0, [r0, -r0]
+ ARM( strne r0, [r0, -r0] )
+ THUMB( movne r0, #0 )
+ THUMB( strne r0, [r0] )
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
@@ -476,9 +484,10 @@
@
@ r0 - instruction
@
- adr r9, ret_from_exception
- adr lr, __und_usr_unknown
+ adr r9, BSYM(ret_from_exception)
+ adr lr, BSYM(__und_usr_unknown)
tst r3, #PSR_T_BIT @ Thumb mode?
+ itet eq @ explicit IT needed for the 1f label
subeq r4, r2, #4 @ ARM instr at LR - 4
subne r4, r2, #2 @ Thumb instr at LR - 2
1: ldreqt r0, [r4]
@@ -488,7 +497,10 @@
beq call_fpe
@ Thumb instruction
#if __LINUX_ARM_ARCH__ >= 7
-2: ldrht r5, [r4], #2
+2:
+ ARM( ldrht r5, [r4], #2 )
+ THUMB( ldrht r5, [r4] )
+ THUMB( add r4, r4, #2 )
and r0, r5, #0xf800 @ mask bits 111x x... .... ....
cmp r0, #0xe800 @ 32bit instruction if xx != 0
blo __und_usr_unknown
@@ -577,9 +589,11 @@
moveq pc, lr
get_thread_info r10 @ get current thread
and r8, r0, #0x00000f00 @ mask out CP number
+ THUMB( lsr r8, r8, #8 )
mov r7, #1
add r6, r10, #TI_USED_CP
- strb r7, [r6, r8, lsr #8] @ set appropriate used_cp[]
+ ARM( strb r7, [r6, r8, lsr #8] ) @ set appropriate used_cp[]
+ THUMB( strb r7, [r6, r8] ) @ set appropriate used_cp[]
#ifdef CONFIG_IWMMXT
@ Test if we need to give access to iWMMXt coprocessors
ldr r5, [r10, #TI_FLAGS]
@@ -587,36 +601,38 @@
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
bcs iwmmxt_task_enable
#endif
- add pc, pc, r8, lsr #6
- mov r0, r0
+ ARM( add pc, pc, r8, lsr #6 )
+ THUMB( lsl r8, r8, #2 )
+ THUMB( add pc, r8 )
+ nop
- mov pc, lr @ CP#0
- b do_fpe @ CP#1 (FPE)
- b do_fpe @ CP#2 (FPE)
- mov pc, lr @ CP#3
+ W(mov) pc, lr @ CP#0
+ W(b) do_fpe @ CP#1 (FPE)
+ W(b) do_fpe @ CP#2 (FPE)
+ W(mov) pc, lr @ CP#3
#ifdef CONFIG_CRUNCH
b crunch_task_enable @ CP#4 (MaverickCrunch)
b crunch_task_enable @ CP#5 (MaverickCrunch)
b crunch_task_enable @ CP#6 (MaverickCrunch)
#else
- mov pc, lr @ CP#4
- mov pc, lr @ CP#5
- mov pc, lr @ CP#6
+ W(mov) pc, lr @ CP#4
+ W(mov) pc, lr @ CP#5
+ W(mov) pc, lr @ CP#6
#endif
- mov pc, lr @ CP#7
- mov pc, lr @ CP#8
- mov pc, lr @ CP#9
+ W(mov) pc, lr @ CP#7
+ W(mov) pc, lr @ CP#8
+ W(mov) pc, lr @ CP#9
#ifdef CONFIG_VFP
- b do_vfp @ CP#10 (VFP)
- b do_vfp @ CP#11 (VFP)
+ W(b) do_vfp @ CP#10 (VFP)
+ W(b) do_vfp @ CP#11 (VFP)
#else
- mov pc, lr @ CP#10 (VFP)
- mov pc, lr @ CP#11 (VFP)
+ W(mov) pc, lr @ CP#10 (VFP)
+ W(mov) pc, lr @ CP#11 (VFP)
#endif
- mov pc, lr @ CP#12
- mov pc, lr @ CP#13
- mov pc, lr @ CP#14 (Debug)
- mov pc, lr @ CP#15 (Control)
+ W(mov) pc, lr @ CP#12
+ W(mov) pc, lr @ CP#13
+ W(mov) pc, lr @ CP#14 (Debug)
+ W(mov) pc, lr @ CP#15 (Control)
#ifdef CONFIG_NEON
.align 6
@@ -667,7 +683,7 @@
__und_usr_unknown:
enable_irq
mov r0, sp
- adr lr, ret_from_exception
+ adr lr, BSYM(ret_from_exception)
b do_undefinstr
ENDPROC(__und_usr_unknown)
@@ -711,7 +727,10 @@
UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
- stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
+ ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
+ THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
+ THUMB( str sp, [ip], #4 )
+ THUMB( str lr, [ip], #4 )
#ifdef CONFIG_MMU
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
@@ -736,8 +755,12 @@
ldr r0, =thread_notify_head
mov r1, #THREAD_NOTIFY_SWITCH
bl atomic_notifier_call_chain
+ THUMB( mov ip, r4 )
mov r0, r5
- ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ ARM( ldmia r4, {r4 - sl, fp, sp, pc} ) @ Load all regs saved previously
+ THUMB( ldmia ip!, {r4 - sl, fp} ) @ Load all regs saved previously
+ THUMB( ldr sp, [ip], #4 )
+ THUMB( ldr pc, [ip] )
UNWIND(.fnend )
ENDPROC(__switch_to)
@@ -772,6 +795,7 @@
* if your compiled code is not going to use the new instructions for other
* purpose.
*/
+ THUMB( .arm )
.macro usr_ret, reg
#ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1044,7 @@
.globl __kuser_helper_end
__kuser_helper_end:
+ THUMB( .thumb )
/*
* Vector stubs.
@@ -1054,17 +1079,23 @@
@ Prepare for SVC32 mode. IRQs remain disabled.
@
mrs r0, cpsr
- eor r0, r0, #(\mode ^ SVC_MODE)
+ eor r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
msr spsr_cxsf, r0
@
@ the branch table must immediately follow this code
@
and lr, lr, #0x0f
+ THUMB( adr r0, 1f )
+ THUMB( ldr lr, [r0, lr, lsl #2] )
mov r0, sp
- ldr lr, [pc, lr, lsl #2]
+ ARM( ldr lr, [pc, lr, lsl #2] )
movs pc, lr @ branch to handler in SVC mode
ENDPROC(vector_\name)
+
+ .align 2
+ @ handler addresses follow this label
+1:
.endm
.globl __stubs_start
@@ -1202,14 +1233,16 @@
.globl __vectors_start
__vectors_start:
- swi SYS_ERROR0
- b vector_und + stubs_offset
- ldr pc, .LCvswi + stubs_offset
- b vector_pabt + stubs_offset
- b vector_dabt + stubs_offset
- b vector_addrexcptn + stubs_offset
- b vector_irq + stubs_offset
- b vector_fiq + stubs_offset
+ ARM( swi SYS_ERROR0 )
+ THUMB( svc #0 )
+ THUMB( nop )
+ W(b) vector_und + stubs_offset
+ W(ldr) pc, .LCvswi + stubs_offset
+ W(b) vector_pabt + stubs_offset
+ W(b) vector_dabt + stubs_offset
+ W(b) vector_addrexcptn + stubs_offset
+ W(b) vector_irq + stubs_offset
+ W(b) vector_fiq + stubs_offset
.globl __vectors_end
__vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 8c3de1a..807cfeb 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
- @ fast_restore_user_regs
- ldr r1, [sp, #S_OFF + S_PSR] @ get calling cpsr
- ldr lr, [sp, #S_OFF + S_PC]! @ get pc
- msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
- mov r0, r0
- add sp, sp, #S_FRAME_SIZE - S_PC
- movs pc, lr @ return & move spsr_svc into cpsr
+ restore_user_regs fast = 1, offset = S_OFF
UNWIND(.fnend )
/*
@@ -51,7 +44,7 @@
work_pending:
tst r1, #_TIF_NEED_RESCHED
bne work_resched
- tst r1, #_TIF_SIGPENDING
+ tst r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
@@ -73,14 +66,7 @@
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
- @ slow_restore_user_regs
- ldr r1, [sp, #S_PSR] @ get calling cpsr
- ldr lr, [sp, #S_PC]! @ get pc
- msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
- mov r0, r0
- add sp, sp, #S_FRAME_SIZE - S_PC
- movs pc, lr @ return & move spsr_svc into cpsr
+ restore_user_regs fast = 0, offset = 0
ENDPROC(ret_to_user)
/*
@@ -132,6 +118,25 @@
#else
+ENTRY(__gnu_mcount_nc)
+ stmdb sp!, {r0-r3, lr}
+ ldr r0, =ftrace_trace_function
+ ldr r2, [r0]
+ adr r0, ftrace_stub
+ cmp r0, r2
+ bne gnu_trace
+ ldmia sp!, {r0-r3, ip, lr}
+ bx ip
+
+gnu_trace:
+ ldr r1, [sp, #20] @ lr of instrumented routine
+ mov r0, lr
+ sub r0, r0, #MCOUNT_INSN_SIZE
+ mov lr, pc
+ mov pc, r2
+ ldmia sp!, {r0-r3, ip, lr}
+ bx ip
+
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
ldr r0, =ftrace_trace_function
@@ -182,8 +187,10 @@
ENTRY(vector_swi)
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling sp, lr
+ ARM( add r8, sp, #S_PC )
+ ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr
+ THUMB( mov r8, sp )
+ THUMB( store_user_sp_lr r8, r10, S_SP ) @ calling sp, lr
mrs r8, spsr @ called from non-FIQ mode, so ok.
str lr, [sp, #S_PC] @ Save calling PC
str r8, [sp, #S_PSR] @ Save CPSR
@@ -272,7 +279,7 @@
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
- adr lr, ret_fast_syscall @ return address
+ adr lr, BSYM(ret_fast_syscall) @ return address
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
@@ -293,7 +300,7 @@
mov r0, #0 @ trace entry [IP = 0]
bl syscall_trace
- adr lr, __sys_trace_return @ return address
+ adr lr, BSYM(__sys_trace_return) @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
cmp scno, #NR_syscalls @ check upper syscall limit
@@ -373,16 +380,6 @@
b sys_clone
ENDPROC(sys_clone_wrapper)
-sys_sigsuspend_wrapper:
- add r3, sp, #S_OFF
- b sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
- add r2, sp, #S_OFF
- b sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e1..a4eaf4f 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
#endif
.endm
- .macro get_thread_info, rd
- mov \rd, sp, lsr #13
- mov \rd, \rd, lsl #13
- .endm
-
.macro alignment_trap, rtemp
#ifdef CONFIG_ALIGNMENT_TRAP
ldr \rtemp, .LCcralign
@@ -49,6 +44,93 @@
#endif
.endm
+ @
+ @ Store/load the USER SP and LR registers by switching to the SYS
+ @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+ @ available. Should only be called from SVC mode
+ @
+ .macro store_user_sp_lr, rd, rtemp, offset = 0
+ mrs \rtemp, cpsr
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch to the SYS mode
+
+ str sp, [\rd, #\offset] @ save sp_usr
+ str lr, [\rd, #\offset + 4] @ save lr_usr
+
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch back to the SVC mode
+ .endm
+
+ .macro load_user_sp_lr, rd, rtemp, offset = 0
+ mrs \rtemp, cpsr
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch to the SYS mode
+
+ ldr sp, [\rd, #\offset] @ load sp_usr
+ ldr lr, [\rd, #\offset + 4] @ load lr_usr
+
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch back to the SVC mode
+ .endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+ .macro svc_exit, rpsr
+ msr spsr_cxsf, \rpsr
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
+ ldr lr, [sp, #\offset + S_PC]! @ get pc
+ msr spsr_cxsf, r1 @ save in spsr_svc
+ .if \fast
+ ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
+ .else
+ ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
+ .endif
+ add sp, sp, #S_FRAME_SIZE - S_PC
+ movs pc, lr @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_thread_info, rd
+ mov \rd, sp, lsr #13
+ mov \rd, \rd, lsl #13
+ .endm
+#else /* CONFIG_THUMB2_KERNEL */
+ .macro svc_exit, rpsr
+ ldr r0, [sp, #S_SP] @ top of the stack
+ ldr r1, [sp, #S_PC] @ return address
+ tst r0, #4 @ orig stack 8-byte aligned?
+ stmdb r0, {r1, \rpsr} @ rfe context
+ ldmia sp, {r0 - r12}
+ ldr lr, [sp, #S_LR]
+ addeq sp, sp, #S_FRAME_SIZE - 8 @ aligned
+ addne sp, sp, #S_FRAME_SIZE - 4 @ not aligned
+ rfeia sp!
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ mov r2, sp
+ load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
+ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
+ ldr lr, [sp, #\offset + S_PC] @ get pc
+ add sp, sp, #\offset + S_SP
+ msr spsr_cxsf, r1 @ save in spsr_svc
+ .if \fast
+ ldmdb sp, {r1 - r12} @ get calling r1 - r12
+ .else
+ ldmdb sp, {r0 - r12} @ get calling r0 - r12
+ .endif
+ add sp, sp, #S_FRAME_SIZE - S_SP
+ movs pc, lr @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_thread_info, rd
+ mov \rd, sp
+ lsr \rd, \rd, #13
+ mov \rd, \rd, lsl #13
+ .endm
+#endif /* !CONFIG_THUMB2_KERNEL */
/*
* These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c..93ad576 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
#define ATAG_CORE 0x54410001
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+ .align 2
.type __switch_data, %object
__switch_data:
.long __mmap_switched
@@ -51,7 +52,9 @@
strcc fp, [r6],#4
bcc 1b
- ldmia r3, {r4, r5, r6, r7, sp}
+ ARM( ldmia r3, {r4, r5, r6, r7, sp})
+ THUMB( ldmia r3, {r4, r5, r6, r7} )
+ THUMB( ldr sp, [r3, #16] )
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
str r2, [r6] @ Save atags pointer
@@ -155,7 +158,8 @@
*/
__lookup_processor_type:
adr r3, 3f
- ldmda r3, {r5 - r7}
+ ldmia r3, {r5 - r7}
+ add r3, r3, #8
sub r3, r3, r7 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
@@ -185,9 +189,10 @@
* Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
* more information about the __proc_info and __arch_info structures.
*/
- .long __proc_info_begin
+ .align 2
+3: .long __proc_info_begin
.long __proc_info_end
-3: .long .
+4: .long .
.long __arch_info_begin
.long __arch_info_end
@@ -203,7 +208,7 @@
* r5 = mach_info pointer in physical address space
*/
__lookup_machine_type:
- adr r3, 3b
+ adr r3, 4b
ldmia r3, {r4, r5, r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e17..e5dfc28 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
*/
.section ".text.head", "ax"
ENTRY(stext)
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
#ifndef CONFIG_CPU_CP15
ldr r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@
ldr r13, __switch_data @ address to jump to after
@ the initialization is done
- adr lr, __after_proc_init @ return (PIC) address
- add pc, r10, #PROCINFO_INITFUNC
+ adr lr, BSYM(__after_proc_init) @ return (PIC) address
+ ARM( add pc, r10, #PROCINFO_INITFUNC )
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
ENDPROC(stext)
/*
@@ -59,7 +61,10 @@
*/
__after_proc_init:
#ifdef CONFIG_CPU_CP15
- mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ /*
+ * CP15 system control register value returned in r0 from
+ * the CPU init function.
+ */
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
#else
@@ -82,7 +87,8 @@
mcr p15, 0, r0, c1, c0, 0 @ write control reg
#endif /* CONFIG_CPU_CP15 */
- mov pc, r13 @ clear the BSS and jump
+ mov r3, r13
+ mov pc, r3 @ clear the BSS and jump
@ to start_kernel
ENDPROC(__after_proc_init)
.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc..38ccbe1 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
*/
.section ".text.head", "ax"
ENTRY(stext)
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@
*/
ldr r13, __switch_data @ address to jump to after
@ mmu has been enabled
- adr lr, __enable_mmu @ return (PIC) address
- add pc, r10, #PROCINFO_INITFUNC
+ adr lr, BSYM(__enable_mmu) @ return (PIC) address
+ ARM( add pc, r10, #PROCINFO_INITFUNC )
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
ENDPROC(stext)
#if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
- msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
@@ -121,12 +123,15 @@
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
- ldmia r4, {r5, r7, r13} @ address to jump to after
+ ldmia r4, {r5, r7, r12} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r7, r4] @ get secondary_data.pgdir
- adr lr, __enable_mmu @ return address
- add pc, r10, #PROCINFO_INITFUNC @ initialise processor
- @ (return control reg)
+ adr lr, BSYM(__enable_mmu) @ return address
+ mov r13, r12 @ __secondary_switched address
+ ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
+ @ (return control reg)
+ THUMB( add r12, r10, #PROCINFO_INITFUNC )
+ THUMB( mov pc, r12 )
ENDPROC(secondary_startup)
/*
@@ -193,8 +198,8 @@
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
mov r3, r3
- mov r3, r3
- mov pc, r13
+ mov r3, r13
+ mov pc, r3
ENDPROC(__turn_mmu_on)
@@ -235,7 +240,8 @@
* will be removed by paging_init(). We use our current program
* counter to determine corresponding section base address.
*/
- mov r6, pc, lsr #20 @ start of kernel section
+ mov r6, pc
+ mov r6, r6, lsr #20 @ start of kernel section
orr r3, r7, r6, lsl #20 @ flags + kernel base
str r3, [r4, r6, lsl #2] @ identity mapping
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490..c9a8619f 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
show_fiq_list(p, v);
#endif
#ifdef CONFIG_SMP
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c8..f28c5e9 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@
unsigned long loc;
Elf32_Sym *sym;
s32 offset;
+ u32 upper, lower, sign, j1, j2;
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@
(offset & 0x0fff);
break;
+ case R_ARM_THM_CALL:
+ case R_ARM_THM_JUMP24:
+ upper = *(u16 *)loc;
+ lower = *(u16 *)(loc + 2);
+
+ /*
+ * 25 bit signed address range (Thumb-2 BL and B.W
+ * instructions):
+ * S:I1:I2:imm10:imm11:0
+ * where:
+ * S = upper[10] = offset[24]
+ * I1 = ~(J1 ^ S) = offset[23]
+ * I2 = ~(J2 ^ S) = offset[22]
+ * imm10 = upper[9:0] = offset[21:12]
+ * imm11 = lower[10:0] = offset[11:1]
+ * J1 = lower[13]
+ * J2 = lower[11]
+ */
+ sign = (upper >> 10) & 1;
+ j1 = (lower >> 13) & 1;
+ j2 = (lower >> 11) & 1;
+ offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+ ((~(j2 ^ sign) & 1) << 22) |
+ ((upper & 0x03ff) << 12) |
+ ((lower & 0x07ff) << 1);
+ if (offset & 0x01000000)
+ offset -= 0x02000000;
+ offset += sym->st_value - loc;
+
+ /* only Thumb addresses allowed (no interworking) */
+ if (!(offset & 1) ||
+ offset <= (s32)0xff000000 ||
+ offset >= (s32)0x01000000) {
+ printk(KERN_ERR
+ "%s: relocation out of range, section "
+ "%d reloc %d sym '%s'\n", module->name,
+ relindex, i, strtab + sym->st_name);
+ return -ENOEXEC;
+ }
+
+ sign = (offset >> 24) & 1;
+ j1 = sign ^ (~(offset >> 23) & 1);
+ j2 = sign ^ (~(offset >> 22) & 1);
+ *(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+ ((offset >> 12) & 0x03ff));
+ *(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+ (j1 << 13) | (j2 << 11) |
+ ((offset >> 1) & 0x07ff));
+ upper = *(u16 *)loc;
+ lower = *(u16 *)(loc + 2);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196df..790fbee 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@
regs.ARM_r2 = (unsigned long)fn;
regs.ARM_r3 = (unsigned long)kernel_thread_exit;
regs.ARM_pc = (unsigned long)kernel_thread_helper;
- regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+ regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1..a2ea385 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@
return -EIO;
tmp = 0;
- if (off < sizeof(struct pt_regs))
+ if (off == PT_TEXT_ADDR)
+ tmp = tsk->mm->start_code;
+ else if (off == PT_DATA_ADDR)
+ tmp = tsk->mm->start_data;
+ else if (off == PT_TEXT_END_ADDR)
+ tmp = tsk->mm->end_code;
+ else if (off < sizeof(struct pt_regs))
tmp = get_user_reg(tsk, off >> 2);
return put_user(tmp, ret);
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 0000000..df246da
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+ unsigned int level;
+ void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+ struct return_address_data *data = d;
+
+ if (!data->level) {
+ data->addr = (void *)frame->lr;
+
+ return 1;
+ } else {
+ --data->level;
+ return 0;
+ }
+}
+
+void *return_address(unsigned int level)
+{
+ struct return_address_data data;
+ struct stackframe frame;
+ register unsigned long current_sp asm ("sp");
+
+ data.level = level + 1;
+
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)return_address;
+
+ walk_stackframe(&frame, save_return_addr, &data);
+
+ if (!data.level)
+ return data.addr;
+ else
+ return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+ return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e412..d4d4f77 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
#include <linux/smp.h>
#include <linux/fs.h>
+#include <asm/unified.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/elf.h>
@@ -327,25 +328,38 @@
}
/*
+ * Define the placement constraint for the inline asm directive below.
+ * In Thumb-2, msr with an immediate value is not allowed.
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC "r"
+#else
+#define PLC "I"
+#endif
+
+ /*
* setup stacks for re-entrant exception handlers
*/
__asm__ (
"msr cpsr_c, %1\n\t"
- "add sp, %0, %2\n\t"
+ "add r14, %0, %2\n\t"
+ "mov sp, r14\n\t"
"msr cpsr_c, %3\n\t"
- "add sp, %0, %4\n\t"
+ "add r14, %0, %4\n\t"
+ "mov sp, r14\n\t"
"msr cpsr_c, %5\n\t"
- "add sp, %0, %6\n\t"
+ "add r14, %0, %6\n\t"
+ "mov sp, r14\n\t"
"msr cpsr_c, %7"
:
: "r" (stk),
- "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+ PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
"I" (offsetof(struct stack, irq[0])),
- "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+ PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
"I" (offsetof(struct stack, abt[0])),
- "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+ PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
"I" (offsetof(struct stack, und[0])),
- "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+ PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
: "r14");
}
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index f6bc5d4..1423a34 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -12,6 +12,7 @@
#include <linux/personality.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
+#include <linux/tracehook.h>
#include <asm/elf.h>
#include <asm/cacheflush.h>
@@ -47,57 +48,22 @@
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(¤t->blocked, mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs->ARM_r0 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, regs, 0))
- return regs->ARM_r0;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- regs->ARM_r0 = -EINTR;
-
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(&saveset, regs, 0))
- return regs->ARM_r0;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_restore_sigmask();
+ return -ERESTARTNOHAND;
}
asmlinkage int
@@ -545,7 +511,7 @@
/*
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
@@ -596,7 +562,7 @@
if (ret != 0) {
force_sigsegv(sig, tsk);
- return;
+ return ret;
}
/*
@@ -610,6 +576,7 @@
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
+ return 0;
}
/*
@@ -621,7 +588,7 @@
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
@@ -634,7 +601,7 @@
* if so.
*/
if (!user_mode(regs))
- return 0;
+ return;
if (try_to_freeze())
goto no_signal;
@@ -643,9 +610,24 @@
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- handle_signal(signr, &ka, &info, oldset, regs, syscall);
+ sigset_t *oldset;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
+ oldset = ¤t->blocked;
+ if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
single_step_set(current);
- return 1;
+ return;
}
no_signal:
@@ -697,14 +679,28 @@
regs->ARM_r0 == -ERESTARTNOINTR) {
setup_syscall_restart(regs);
}
+
+ /* If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
single_step_set(current);
- return 0;
}
asmlinkage void
do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
{
if (thread_flags & _TIF_SIGPENDING)
- do_signal(¤t->blocked, regs, syscall);
+ do_signal(regs, syscall);
+
+ if (thread_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5..20b7411 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
* Note that with framepointer enabled, even the leaf functions have the same
* prologue and epilogue, therefore we can ignore the LR value in this case.
*/
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@
}
#endif
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
int (*fn)(struct stackframe *, void *), void *data)
{
while (1) {
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11..39baf11 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@
};
enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+ FP = 7,
+#else
FP = 11,
+#endif
SP = 13,
LR = 14,
PC = 15
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d92..638deb1 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@
rsb ip, r2, #32
movmi ah, ah, lsl r2
movpl ah, al, lsl r3
- orrmi ah, ah, al, lsr ip
+ ARM( orrmi ah, ah, al, lsr ip )
+ THUMB( lsrmi r3, al, ip )
+ THUMB( orrmi ah, ah, r3 )
mov al, al, lsl r2
mov pc, lr
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b355..015e8aa5 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@
rsb ip, r2, #32
movmi al, al, lsr r2
movpl al, ah, asr r3
- orrmi al, al, ah, lsl ip
+ ARM( orrmi al, al, ah, lsl ip )
+ THUMB( lslmi r3, ah, ip )
+ THUMB( orrmi al, al, r3 )
mov ah, ah, asr r2
mov pc, lr
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0..aaf7220 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@
beq no_frame @ we have no stack frames
tst r1, #0x10 @ 26 or 32-bit mode?
- moveq mask, #0xfc000003 @ mask for 26-bit
+ ARM( moveq mask, #0xfc000003 )
+ THUMB( moveq mask, #0xfc000000 )
+ THUMB( orreq mask, #0x03 )
movne mask, #0 @ mask for 32-bit
1: stmfd sp!, {pc} @ calculate offset of PC stored
@@ -126,7 +128,9 @@
mov reg, #10
mov r7, #0
1: mov r3, #1
- tst instr, r3, lsl reg
+ ARM( tst instr, r3, lsl reg )
+ THUMB( lsl r3, reg )
+ THUMB( tst instr, r3 )
beq 2f
add r7, r7, #1
teq r7, #6
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627..d422529 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
tst r2, r0, lsl r3
\instr r2, r2, r0, lsl r3
\store r2, [r1]
- restore_irqs ip
moveq r0, #0
+ restore_irqs ip
mov pc, lr
.endm
#endif
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f567..1279abd 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@
ands ip, r0, #3
beq 1f
cmp ip, #2
-USER( strbt r2, [r0], #1)
-USER( strlebt r2, [r0], #1)
-USER( strltbt r2, [r0], #1)
+ strusr r2, r0, 1
+ strusr r2, r0, 1, le
+ strusr r2, r0, 1, lt
rsb ip, ip, #4
sub r1, r1, ip @ 7 6 5 4 3 2 1
1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
-USER( strplt r2, [r0], #4)
-USER( strplt r2, [r0], #4)
+ strusr r2, r0, 4, pl, rept=2
bpl 1b
adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3
-USER( strplt r2, [r0], #4)
+ strusr r2, r0, 4, pl
2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
-USER( strnebt r2, [r0], #1)
-USER( strnebt r2, [r0], #1)
+ strusr r2, r0, 1, ne, rept=2
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
+ it ne @ explicit IT needed for the label
USER( strnebt r2, [r0])
mov r0, #0
ldmfd sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a1..e4fe124 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
* Number of bytes NOT copied.
*/
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT 0
+#else
+#define LDR1W_SHIFT 1
+#endif
+#define STR1W_SHIFT 0
+
.macro ldr1w ptr reg abort
-100: ldrt \reg, [\ptr], #4
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ ldrusr \reg, \ptr, 4, abort=\abort
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
.endm
.macro ldr1b ptr reg cond=al abort
-100: ldr\cond\()bt \reg, [\ptr], #1
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ ldrusr \reg, \ptr, 1, \cond, abort=\abort
.endm
.macro str1w ptr reg abort
- str \reg, [\ptr], #4
+ W(str) \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce6..805e3f8 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
*
* Restore registers with the values previously saved with the
* 'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ * Correction to be applied to the "ip" register when branching into
+ * the ldr1w or str1w instructions (some of these macros may expand to
+ * than one 32bit instruction in Thumb-2)
*/
@@ -99,9 +106,15 @@
5: ands ip, r2, #28
rsb ip, ip, #32
+#if LDR1W_SHIFT > 0
+ lsl ip, ip, #LDR1W_SHIFT
+#endif
addne pc, pc, ip @ C is always clear here
b 7f
-6: nop
+6:
+ .rept (1 << LDR1W_SHIFT)
+ W(nop)
+ .endr
ldr1w r1, r3, abort=20f
ldr1w r1, r4, abort=20f
ldr1w r1, r5, abort=20f
@@ -110,9 +123,16 @@
ldr1w r1, r8, abort=20f
ldr1w r1, lr, abort=20f
+#if LDR1W_SHIFT < STR1W_SHIFT
+ lsl ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+ lsr ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
add pc, pc, ip
nop
- nop
+ .rept (1 << STR1W_SHIFT)
+ W(nop)
+ .endr
str1w r0, r3, abort=20f
str1w r0, r4, abort=20f
str1w r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f..1a71e15 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
* Number of bytes NOT copied.
*/
+#define LDR1W_SHIFT 0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT 0
+#else
+#define STR1W_SHIFT 1
+#endif
+
.macro ldr1w ptr reg abort
- ldr \reg, [\ptr], #4
+ W(ldr) \reg, [\ptr], #4
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
.endm
.macro str1w ptr reg abort
-100: strt \reg, [\ptr], #4
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ strusr \reg, \ptr, 4, abort=\abort
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
.endm
.macro str1b ptr reg cond=al abort
-100: str\cond\()bt \reg, [\ptr], #1
- .section __ex_table, "a"
- .long 100b, \abort
- .previous
+ strusr \reg, \ptr, 1, \cond, abort=\abort
.endm
.macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb..fd0e9dc 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
.endm
.macro load1b, reg1
-9999: ldrbt \reg1, [r0], $1
- .section __ex_table, "a"
- .align 3
- .long 9999b, 6001f
- .previous
+ ldrusr \reg1, r0, 1
.endm
.macro load2b, reg1, reg2
-9999: ldrbt \reg1, [r0], $1
-9998: ldrbt \reg2, [r0], $1
- .section __ex_table, "a"
- .long 9999b, 6001f
- .long 9998b, 6001f
- .previous
+ ldrusr \reg1, r0, 1
+ ldrusr \reg2, r0, 1
.endm
.macro load1l, reg1
-9999: ldrt \reg1, [r0], $4
- .section __ex_table, "a"
- .align 3
- .long 9999b, 6001f
- .previous
+ ldrusr \reg1, r0, 4
.endm
.macro load2l, reg1, reg2
-9999: ldrt \reg1, [r0], $4
-9998: ldrt \reg2, [r0], $4
- .section __ex_table, "a"
- .long 9999b, 6001f
- .long 9998b, 6001f
- .previous
+ ldrusr \reg1, r0, 4
+ ldrusr \reg2, r0, 4
.endm
.macro load4l, reg1, reg2, reg3, reg4
-9999: ldrt \reg1, [r0], $4
-9998: ldrt \reg2, [r0], $4
-9997: ldrt \reg3, [r0], $4
-9996: ldrt \reg4, [r0], $4
- .section __ex_table, "a"
- .long 9999b, 6001f
- .long 9998b, 6001f
- .long 9997b, 6001f
- .long 9996b, 6001f
- .previous
+ ldrusr \reg1, r0, 4
+ ldrusr \reg2, r0, 4
+ ldrusr \reg3, r0, 4
+ ldrusr \reg4, r0, 4
.endm
/*
@@ -92,14 +70,14 @@
*/
.section .fixup,"ax"
.align 4
-6001: mov r4, #-EFAULT
+9001: mov r4, #-EFAULT
ldr r5, [fp, #4] @ *err_ptr
str r4, [r5]
ldmia sp, {r1, r2} @ retrieve dst, len
add r2, r2, r1
mov r0, #0 @ zero the buffer
-6002: teq r2, r1
+9002: teq r2, r1
strneb r0, [r1], #1
- bne 6002b
+ bne 9002b
load_regs
.previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e78..faa77481 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@
mov yh, xh, lsr ip
mov yl, xl, lsr ip
rsb ip, ip, #32
- orr yl, yl, xh, lsl ip
+ ARM( orr yl, yl, xh, lsl ip )
+ THUMB( lsl xh, xh, ip )
+ THUMB( orr yl, yl, xh )
mov xh, xl, lsl ip
mov xh, xh, lsr ip
mov pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc..1e4cbd4 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@
teq r1, #0
beq 3f
mov r2, #0
-1: ldrb r3, [r0, r2, lsr #3]
+1:
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eors r3, r3, #0xff @ invert bits
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -44,7 +47,9 @@
beq 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
- ldrb r3, [r0, r2, lsr #3]
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
@@ -61,7 +66,10 @@
teq r1, #0
beq 3f
mov r2, #0
-1: ldrb r3, [r0, r2, lsr #3]
+1:
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -80,7 +88,9 @@
beq 3b
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
- ldrb r3, [r0, r2, lsr #3]
+ ARM( ldrb r3, [r0, r2, lsr #3] )
+ THUMB( lsr r3, r2, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
@@ -95,7 +105,9 @@
beq 3f
mov r2, #0
1: eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eors r3, r3, #0xff @ invert bits
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -111,7 +123,9 @@
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
@@ -125,7 +139,9 @@
beq 3f
mov r2, #0
1: eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3
bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
@@ -141,7 +157,9 @@
ands ip, r2, #7
beq 1b @ If new byte, goto old routine
eor r3, r2, #0x18 @ big endian byte ordering
- ldrb r3, [r0, r3, lsr #3]
+ ARM( ldrb r3, [r0, r3, lsr #3] )
+ THUMB( lsr r3, #3 )
+ THUMB( ldrb r3, [r0, r3] )
movs r3, r3, lsr ip @ shift off unused bits
bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088..a1814d9 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2: ldrbt r2, [r0]
+3: ldrbt r3, [r0, #1]
+#else
2: ldrbt r2, [r0], #1
3: ldrbt r3, [r0]
+#endif
#ifndef __ARMEB__
orr r2, r2, r3, lsl #8
#else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d658561..ff4f71b 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@
#endif
.Loutsw_noalign:
- ldr r3, [r1, -r3]!
+ ARM( ldr r3, [r1, -r3]! )
+ THUMB( rsb r3, r3, #0 )
+ THUMB( ldr r3, [r1, r3] )
+ THUMB( sub r1, r3 )
subcs r2, r2, #1
bcs 2f
subs r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338..f83d449 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@
rsb ip, r2, #32
movmi al, al, lsr r2
movpl al, ah, lsr r3
- orrmi al, al, ah, lsl ip
+ ARM( orrmi al, al, ah, lsl ip )
+ THUMB( lslmi r3, ah, ip )
+ THUMB( orrmi al, al, r3 )
mov ah, ah, lsr r2
mov pc, lr
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d0026..a9b9e22 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+#define LDR1W_SHIFT 0
+#define STR1W_SHIFT 0
+
.macro ldr1w ptr reg abort
- ldr \reg, [\ptr], #4
+ W(ldr) \reg, [\ptr], #4
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
.endm
.macro str1w ptr reg abort
- str \reg, [\ptr], #4
+ W(str) \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 1254918..5025c86 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
- ldr r3, [r1, #-4]!
- ldr r4, [r1, #-4]!
- ldr r5, [r1, #-4]!
- ldr r6, [r1, #-4]!
- ldr r7, [r1, #-4]!
- ldr r8, [r1, #-4]!
- ldr lr, [r1, #-4]!
+ W(ldr) r3, [r1, #-4]!
+ W(ldr) r4, [r1, #-4]!
+ W(ldr) r5, [r1, #-4]!
+ W(ldr) r6, [r1, #-4]!
+ W(ldr) r7, [r1, #-4]!
+ W(ldr) r8, [r1, #-4]!
+ W(ldr) lr, [r1, #-4]!
add pc, pc, ip
nop
nop
- str r3, [r0, #-4]!
- str r4, [r0, #-4]!
- str r5, [r0, #-4]!
- str r6, [r0, #-4]!
- str r7, [r0, #-4]!
- str r8, [r0, #-4]!
- str lr, [r0, #-4]!
+ W(str) r3, [r0, #-4]!
+ W(str) r4, [r0, #-4]!
+ W(str) r5, [r0, #-4]!
+ W(str) r6, [r0, #-4]!
+ W(str) r7, [r0, #-4]!
+ W(str) r8, [r0, #-4]!
+ W(str) lr, [r0, #-4]!
CALGN( bcs 2b )
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1..02fedbf 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@
ENTRY(__put_user_2)
mov ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2: strbt r2, [r0]
+3: strbt ip, [r0, #1]
+#else
+2: strbt ip, [r0]
+3: strbt r2, [r0, #1]
+#endif
+#else /* !CONFIG_THUMB2_KERNEL */
#ifndef __ARMEB__
2: strbt r2, [r0], #1
3: strbt ip, [r0]
@@ -44,6 +53,7 @@
2: strbt ip, [r0], #1
3: strbt r2, [r0]
#endif
+#endif /* CONFIG_THUMB2_KERNEL */
mov r0, #0
mov pc, lr
ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5: strt r2, [r0]
+6: strt r3, [r0, #4]
+#else
5: strt r2, [r0], #4
6: strt r3, [r0]
+#endif
mov r0, #0
mov pc, lr
ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb20..09b548c 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@
ENDPROC(sha_transform)
+ .align 2
.L_sha_K:
.word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
@@ -195,6 +196,7 @@
* void sha_init(__u32 *buf)
*/
+ .align 2
.L_sha_initial_digest:
.word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c..1c9814f 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
ENTRY(__strncpy_from_user)
mov ip, r1
1: subs r2, r2, #1
-USER( ldrplbt r3, [r1], #1)
+ ldrusr r3, r1, 1, pl
bmi 2f
strb r3, [r0], #1
teq r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d0..7855b29 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
ENTRY(__strnlen_user)
mov r2, r0
1:
-USER( ldrbt r3, [r0], #1)
+ ldrusr r3, r0, 1
teq r3, #0
beq 2f
subs r1, r1, #1
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f..a24d824 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
@@ -41,6 +47,12 @@
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+config ARCH_AT91SAM9G45
+ bool "AT91SAM9G45"
+ select CPU_ARM926T
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
config ARCH_AT91CAP9
bool "AT91CAP9"
select CPU_ARM926T
@@ -144,6 +156,13 @@
help
Select this if you are using the ucDragon YL-9200 board.
+config MACH_CPUAT91
+ bool "Eukrea CPUAT91"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using the Eukrea Electromatique's
+ CPUAT91 board <http://www.eukrea.com/>.
+
endif
# ----------------------------------------------------------
@@ -205,6 +224,13 @@
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
+config MACH_CPU9260
+ bool "Eukrea CPU9260 board"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9260 Board <http://www.eukrea.com/>
+
endif
# ----------------------------------------------------------
@@ -224,6 +250,21 @@
# ----------------------------------------------------------
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9G10
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
@@ -276,6 +317,29 @@
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+config MACH_CPU9G20
+ bool "Eukrea CPU9G20 board"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+ bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+ depends on ARCH_AT91SAM9G45
+ help
+ Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+ "ES" at the end of the name means that this board is an
+ Engineering Sample.
+
endif
# ----------------------------------------------------------
@@ -315,13 +379,13 @@
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
help
Enable support for the DataFlash card.
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -383,7 +447,7 @@
config AT91_EARLY_USART3
bool "USART3"
- depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
config AT91_EARLY_USART4
bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff23..a6ed015 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,9 +13,11 @@
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
@@ -32,6 +34,7 @@
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -40,9 +43,11 @@
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
@@ -54,6 +59,10 @@
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
+
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a250..3462b81 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@
zreladdr-y := 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac..ee4ea0e7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@
void __init at91_add_device_serial(void) {}
#endif
+/* --------------------------------------------------------------------
+ * CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+ defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_4,
+ .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cf0_device = {
+ .id = 0,
+ .dev = {
+ .platform_data = &cf0_data,
+ },
+ .resource = cf0_resources,
+ .num_resources = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_5,
+ .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cf1_device = {
+ .id = 1,
+ .dev = {
+ .platform_data = &cf1_data,
+ },
+ .resource = cf1_resources,
+ .num_resources = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ struct platform_device *pdev;
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+ switch (data->chipselect) {
+ case 4:
+ at91_set_multi_drive(AT91_PIN_PC8, 0);
+ at91_set_A_periph(AT91_PIN_PC8, 0);
+ csa |= AT91_MATRIX_CS4A_SMC_CF1;
+ cf0_data = *data;
+ pdev = &cf0_device;
+ break;
+ case 5:
+ at91_set_multi_drive(AT91_PIN_PC9, 0);
+ at91_set_A_periph(AT91_PIN_PC9, 0);
+ csa |= AT91_MATRIX_CS5A_SMC_CF2;
+ cf1_data = *data;
+ pdev = &cf1_device;
+ break;
+ default:
+ printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+ data->chipselect);
+ return;
+ }
+
+ at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+ if (data->rst_pin) {
+ at91_set_multi_drive(data->rst_pin, 0);
+ at91_set_gpio_output(data->rst_pin, 1);
+ }
+
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 0);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 0);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+
+ at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
+ at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
+ at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
+
+ if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+ pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+ pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+ else
+ pdev->name = "at91_cf";
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7..4ecf379 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/cpu.h>
#include <mach/at91sam9261.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+ {
.virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
.pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
.length = AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@
},
};
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+ {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+ .length = AT91SAM9G10_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@
/* Map peripherals */
iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+ if (cpu_is_at91sam9g10())
+ iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+ else
+ iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
at91_arch_reset = at91sam9261_reset;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f2332..55719a9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@
* AC97
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
@@ -725,8 +725,8 @@
};
static struct platform_device at91sam9263_ac97_device = {
- .name = "ac97c",
- .id = 1,
+ .name = "atmel_ac97c",
+ .id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@
.num_resources = ARRAY_SIZE(ac97_resources),
};
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
@@ -750,11 +750,11 @@
if (data->reset_pin)
at91_set_gpio_output(data->reset_pin, 0);
- ac97_data = *ek_data;
+ ac97_data = *data;
platform_device_register(&at91sam9263_ac97_device);
}
#else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 0000000..85166b7
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ * Chip-specific setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+ .length = AT91SAM9G45_SRAM_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+ .name = "pioDE_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+ .name = "tsc_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+ .name = "uhphs_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .parent = &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioDE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc0_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &tcb_clk,
+ &pwm_clk,
+ &tsc_clk,
+ &dma_clk,
+ &uhphs_clk,
+ &lcdc_clk,
+ &ac97_clk,
+ &macb_clk,
+ &isi_clk,
+ &udphs_clk,
+ &mmc1_clk,
+ // irq0
+ &ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+ {
+ .id = AT91SAM9G45_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIODE,
+ .offset = AT91_PIOD,
+ .clock = &pioDE_clk,
+ }, {
+ .id = AT91SAM9G45_ID_PIODE,
+ .offset = AT91_PIOE,
+ .clock = &pioDE_clk,
+ }
+};
+
+static void at91sam9g45_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+ at91_arch_reset = at91sam9g45_reset;
+ pm_power_off = at91sam9g45_poweroff;
+ at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9g45_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D and E */
+ 0,
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface 0 */
+ 6, /* Two-Wire Interface 0 */
+ 6, /* Two-Wire Interface 1 */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+ 0, /* Pulse Width Modulation Controller */
+ 0, /* Touch Screen Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Host High Speed port */
+ 3, /* LDC Controller */
+ 5, /* AC97 Controller */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+ 2, /* USB Device High speed port */
+ 0,
+ 0, /* Multimedia Card Interface 1 */
+ 0,
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9g45_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 0000000..d746e86
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ * On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_OHCI_BASE,
+ .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ohci_data,
+ },
+ .resource = usbh_ohci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ohci_data = *data;
+ platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_UDPHS_FIFO,
+ .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_BASE_UDPHS,
+ .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_UDPHS,
+ .end = AT91SAM9G45_ID_UDPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+ [idx] = { \
+ .name = nam, \
+ .index = idx, \
+ .fifo_size = maxpkt, \
+ .nr_banks = maxbk, \
+ .can_dma = dma, \
+ .can_isoc = isoc, \
+ }
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+ EP("ep0", 0, 64, 1, 0, 0),
+ EP("ep1", 1, 1024, 2, 1, 1),
+ EP("ep2", 2, 1024, 2, 1, 1),
+ EP("ep3", 3, 1024, 3, 1, 0),
+ EP("ep4", 4, 1024, 3, 1, 0),
+ EP("ep5", 5, 1024, 3, 1, 1),
+ EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+ struct usba_platform_data pdata;
+ struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+ .name = "atmel_usba_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &usba_udc_data.pdata,
+ },
+ .resource = usba_udc_resources,
+ .num_resources = ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+ usba_udc_data.pdata.vbus_pin = -EINVAL;
+ usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+ memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+ if (data && data->vbus_pin > 0) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ /* Clocks */
+ at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+ at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+ platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_EMAC,
+ .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_EMAC,
+ .end = AT91SAM9G45_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ [0] = {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_BASE_SYS + AT91_ECC,
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+ .name = "atmel_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+ .sda_pin = AT91_PIN_PA20,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PA21,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+ .sda_pin = AT91_PIN_PB10,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB11,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev.platform_data = &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ if (i2c_id == 0) {
+ at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI0,
+ .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI0,
+ .end = AT91SAM9G45_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+ .name = "at91_i2c",
+ .id = 0,
+ .resource = twi0_resources,
+ .num_resources = ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TWI1,
+ .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TWI1,
+ .end = AT91SAM9G45_ID_TWI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+ .name = "at91_i2c",
+ .id = 1,
+ .resource = twi1_resources,
+ .num_resources = ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+ i2c_register_board_info(i2c_id, devices, nr_devices);
+
+ /* pins used for TWI interface */
+ if (i2c_id == 0) {
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+ platform_device_register(&at91sam9g45_twi0_device);
+ } else {
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+ platform_device_register(&at91sam9g45_twi1_device);
+ }
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI0,
+ .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI0,
+ .end = AT91SAM9G45_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SPI1,
+ .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SPI1,
+ .end = AT91SAM9G45_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9g45_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_LCDC_BASE,
+ .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_LCDC,
+ .end = AT91SAM9G45_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
+
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
+ at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
+ at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB0,
+ .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+ .name = "atmel_tcb",
+ .id = 0,
+ .resource = tcb0_resources,
+ .num_resources = ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TCB1,
+ .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TCB,
+ .end = AT91SAM9G45_ID_TCB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+ .name = "atmel_tcb",
+ .id = 1,
+ .resource = tcb1_resources,
+ .num_resources = ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+ /* this chip has one clock and irq for all six TC channels */
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb0_device);
+ at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+ platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+ platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_PWMC,
+ .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_PWMC,
+ .end = AT91SAM9G45_ID_PWMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+ .name = "atmel_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_mask,
+ },
+ .resource = pwm_resources,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+ if (mask & (1 << AT91_PWM0))
+ at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
+
+ if (mask & (1 << AT91_PWM1))
+ at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
+
+ if (mask & (1 << AT91_PWM2))
+ at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
+
+ if (mask & (1 << AT91_PWM3))
+ at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
+
+ pwm_mask = mask;
+
+ platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC0,
+ .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC0,
+ .end = AT91SAM9G45_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD1, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD0, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_SSC1,
+ .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_SSC1,
+ .end = AT91SAM9G45_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PD14, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PD12, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PD10, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PD11, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PD13, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9G45_ID_SSC0:
+ pdev = &at91sam9g45_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9G45_ID_SSC1:
+ pdev = &at91sam9g45_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0,
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US0,
+ .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US0,
+ .end = AT91SAM9G45_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US1,
+ .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US1,
+ .end = AT91SAM9G45_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US2,
+ .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US2,
+ .end = AT91SAM9G45_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_US3,
+ .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_US3,
+ .end = AT91SAM9G45_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9g45_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US0:
+ pdev = &at91sam9g45_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US1:
+ pdev = &at91sam9g45_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US2:
+ pdev = &at91sam9g45_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9G45_ID_US3:
+ pdev = &at91sam9g45_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ at91_add_device_tc();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b..61e52b6 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@
},
};
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+ .chipselect = 4,
+ .irq_pin = AT91_PIN_PA6,
+ .rst_pin = AT91_PIN_PA7,
+ .flags = AT91_CF_TRUE_IDE,
+};
+
static void __init afeb9260_board_init(void)
{
/* Serial */
@@ -202,6 +212,8 @@
ARRAY_SIZE(afeb9260_i2c_devices));
/* Audio */
at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+ /* IDE */
+ at91_add_device_cf(&afeb9260_cf_data);
}
MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 0000000..4bc2e9f
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+ /* USART4 on ttyS5. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+ .vbus_pin = AT91_PIN_PC8,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .bus_width_16 = 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+ sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+ at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+ .width = 2,
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_64M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cpuat9260_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 10,
+ .nrd_pulse = 10,
+ .ncs_write_pulse = 6,
+ .nwe_pulse = 6,
+
+ .read_cycle = 12,
+ .write_cycle = 8,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16,
+ .tdf_cycles = 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 13,
+ .nrd_pulse = 13,
+ .ncs_write_pulse = 8,
+ .nwe_pulse = 8,
+
+ .read_cycle = 15,
+ .write_cycle = 10,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16,
+ .tdf_cycles = 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+ /* configure chip-select 0 (NOR) */
+ sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+ platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+ { /* LED1 */
+ .name = "LED1",
+ .gpio = AT91_PIN_PC11,
+ .active_low = 1,
+ .default_trigger = "timer",
+ },
+ { /* LED2 */
+ .name = "LED2",
+ .gpio = AT91_PIN_PC12,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* LED3 */
+ .name = "LED3",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* LED4 */
+ .name = "LED4",
+ .gpio = AT91_PIN_PC9,
+ .active_low = 1,
+ .default_trigger = "none",
+ }
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0x68),
+ .type = "ds1339",
+ },
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+ {
+ .gpio = AT91_PIN_PC3,
+ .code = BTN_0,
+ .desc = "BP1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB20,
+ .code = BTN_1,
+ .desc = "BP2",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+ .buttons = cpu9krea_buttons,
+ .nbuttons = ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &cpu9krea_button_data,
+ }
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */
+ at91_set_deglitch(AT91_PIN_PC3, 1);
+ at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */
+ at91_set_deglitch(AT91_PIN_PB20, 1);
+
+ platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+ /* NOR */
+ cpu9krea_add_device_nor();
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&cpu9krea_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&cpu9krea_udc_data);
+ /* NAND */
+ cpu9krea_add_device_nand();
+ /* Ethernet */
+ at91_add_device_eth(&cpu9krea_macb_data);
+ /* MMC */
+ at91_add_device_mmc(0, &cpu9krea_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(cpu9krea_i2c_devices,
+ ARRAY_SIZE(cpu9krea_i2c_devices));
+ /* LEDs */
+ at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+ /* Push Buttons */
+ cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+ /* Maintainer: Eric Benard - EUKREA Electromatique */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cpu9krea_map_io,
+ .init_irq = cpu9krea_init_irq,
+ .init_machine = cpu9krea_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 0000000..a28d996
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = AT91_PIN_PC0,
+ },
+};
+
+static void __init cpuat91_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS3 (Rx, Tx) */
+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+ .vbus_pin = AT91_PIN_PC15,
+ .pullup_pin = AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+ .det_pin = AT91_PIN_PC2,
+ .wire4 = 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+ .width = 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+ .start = AT91_CHIPSELECT_0,
+ .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cpuat91_flash_data,
+ },
+ .resource = &cpuat91_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+ .mapname = "SRAM",
+ .bankwidth = 2,
+};
+
+static struct resource at91_sram_resource[] = {
+ [0] = {
+ .start = AT91RM9200_SRAM_BASE,
+ .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .resource = at91_sram_resource,
+ .num_resources = ARRAY_SIZE(at91_sram_resource),
+ .dev = {
+ .platform_data = &at91_sram_pdata,
+ },
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+ &cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+ &at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* LEDs. */
+ at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+ /* Ethernet */
+ at91_add_device_eth(&cpuat91_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&cpuat91_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&cpuat91_udc_data);
+ /* MMC */
+ at91_add_device_mmc(0, &cpuat91_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* Platform devices */
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+ /* Maintainer: Eric Benard - EUKREA Electromatique */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = cpuat91_map_io,
+ .init_irq = cpuat91_init_irq,
+ .init_machine = cpuat91_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da..f9b1999 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@
*/
static struct at73c213_board_info at73c213_data = {
.ssc_id = 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
.shortname = "AT91SAM9261-EK external DAC",
+#else
+ .shortname = "AT91SAM9G10-EK external DAC",
+#endif
};
#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@
.default_monspecs = &at91fb_default_stn_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
.guard_time = 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+#endif
};
#else
@@ -467,6 +474,9 @@
.default_monspecs = &at91fb_default_tft_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
.guard_time = 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+#endif
};
#endif
@@ -600,7 +610,11 @@
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
+#if defined(CONFIG_MACH_AT91SAM9261EK)
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d5252..1bf7bd4 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@
/*
* AC97
+ * reset_pin is not connected: NRST
*/
-static struct atmel_ac97_data ek_ac97_data = {
- .reset_pin = AT91_PIN_PA13,
+static struct ac97c_platform_data ek_ac97_data = {
};
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index a55398e..ca470d5 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -273,6 +273,7 @@
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
+ I2C_BOARD_INFO("wm8731", 0x1b),
},
};
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 0000000..b8558ea
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9g45_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 not connected on the -EK board */
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+ .ports = 2,
+ .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+ .vbus_pin = AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PD5,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = SZ_64M,
+ },
+ {
+ .name = "Partition 2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "LG",
+ .refresh = 60,
+ .xres = 480, .yres = 272,
+ .pixclock = KHZ2PICOS(9000),
+
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 40, .lower_margin = 1,
+ .hsync_len = 45, .vsync_len = 1,
+
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "LG",
+ .monitor = "LB043WQ1",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 17640,
+ .vfmin = 57,
+ .vfmax = 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
+ .default_bpp = 32,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .guard_time = 9,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PB6,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PB7,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+ /* BP3, "joystick" */
+ {
+ .code = KEY_LEFT,
+ .gpio = AT91_PIN_PB14,
+ .active_low = 1,
+ .desc = "Joystick Left",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = AT91_PIN_PB15,
+ .active_low = 1,
+ .desc = "Joystick Right",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = AT91_PIN_PB16,
+ .active_low = 1,
+ .desc = "Joystick Up",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = AT91_PIN_PB17,
+ .active_low = 1,
+ .desc = "Joystick Down",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB18,
+ .active_low = 1,
+ .desc = "Joystick Press",
+ },
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+ at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+ at91_set_deglitch(ek_buttons[i].gpio, 1);
+ }
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "top" led, red, powerled */
+ .name = "d8",
+ .gpio = AT91_PIN_PD30,
+ .default_trigger = "heartbeat",
+ },
+ { /* "left" led, green, userled2, pwm3 */
+ .name = "d6",
+ .gpio = AT91_PIN_PD0,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+ { /* "right" led, green, userled1, pwm1 */
+ .name = "d7",
+ .gpio = AT91_PIN_PD31,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+ { /* "right" led, green, userled1, pwm1 */
+ .name = "d7",
+ .gpio = 1, /* is PWM channel number */
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB HS Host */
+ at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ /* USB HS Device */
+ at91_add_device_usba(&ek_usba_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* NAND */
+ ek_add_device_nand();
+ /* I2C */
+ at91_add_device_i2c(0, NULL, 0);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index f6b5672..9d07679 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <video/atmel_lcdc.h>
@@ -208,6 +210,79 @@
#endif
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "bottom" led, green, userled1 to be defined */
+ .name = "ds1",
+ .gpio = AT91_PIN_PD15,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "bottom" led, green, userled2 to be defined */
+ .name = "ds2",
+ .gpio = AT91_PIN_PD16,
+ .active_low = 1,
+ .default_trigger = "none",
+ },
+ { /* "power" led, yellow */
+ .name = "ds3",
+ .gpio = AT91_PIN_PD14,
+ .default_trigger = "heartbeat",
+ }
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PB0,
+ .code = BTN_2,
+ .desc = "Right Click",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB1,
+ .code = BTN_1,
+ .desc = "Left Click",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
+ at91_set_deglitch(AT91_PIN_PB1, 1);
+ at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
+ at91_set_deglitch(AT91_PIN_PB0, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -226,6 +301,10 @@
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen Controller */
at91_add_device_tsadcc();
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578f..c042dcf 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
* Chips have some kind of clocks : group them by functionality
*/
#define cpu_has_utmi() ( cpu_is_at91cap9() \
- || cpu_is_at91sam9rl())
+ || cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45())
-#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
+ || cpu_is_at91sam9g45())
-#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
-#define cpu_has_upll() (0)
+#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45()))
+
+#define cpu_has_upll() (cpu_is_at91sam9g45())
/* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl())
/* USB device FS only */
-#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45()))
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@
{
unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+ if (cpu_is_at91sam9g45()) {
+ if (is_on)
+ uckr |= AT91_PMC_BIASEN;
+ else
+ uckr &= ~AT91_PMC_BIASEN;
+ }
+
if (is_on) {
is_on = AT91_PMC_LOCKU;
at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@
unsigned long flags;
unsigned prescale;
unsigned long actual;
+ unsigned long prev = ULONG_MAX;
if (!clk_is_programmable(clk))
return -EINVAL;
@@ -317,8 +330,16 @@
actual = clk->parent->rate_hz;
for (prescale = 0; prescale < 7; prescale++) {
- if (actual && actual <= rate)
+ if (actual > rate)
+ prev = actual;
+
+ if (actual && actual <= rate) {
+ if ((prev - rate) < (rate - actual)) {
+ actual = prev;
+ prescale--;
+ }
break;
+ }
actual >>= 1;
}
@@ -373,6 +394,10 @@
return -EBUSY;
if (!clk_is_primary(parent) || !clk_is_programmable(clk))
return -EINVAL;
+
+ if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+ return -EINVAL;
+
spin_lock_irqsave(&clk_lock, flags);
clk->rate_hz = parent->rate_hz;
@@ -601,7 +626,9 @@
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+ cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+ cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
@@ -637,6 +664,7 @@
{
unsigned tmp, freq, mckr;
int i;
+ int pll_overclock = false;
/*
* When the bootloader initialized the main oscillator correctly,
@@ -654,12 +682,25 @@
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
- || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+ if (cpu_has_300M_plla()) {
+ if (plla.rate_hz > 300000000)
+ pll_overclock = true;
+ } else if (cpu_has_800M_plla()) {
+ if (plla.rate_hz > 800000000)
+ pll_overclock = true;
+ } else {
+ if (plla.rate_hz > 209000000)
+ pll_overclock = true;
+ }
+ if (pll_overclock)
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
+ if (cpu_is_at91sam9g45()) {
+ mckr = at91_sys_read(AT91_PMC_MCKR);
+ plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */
+ }
- if (cpu_has_upll() && !cpu_has_pllb()) {
+ if (!cpu_has_pllb() && cpu_has_upll()) {
/* setup UTMI clock as the fourth primary clock
* (instead of pllb) */
utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +742,9 @@
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
+ } else if (cpu_is_at91sam9g45()) {
+ mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+ freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f..88e413b 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
@@ -23,6 +24,7 @@
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0..ae4772e 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@
unsigned offset, int val);
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .request = at91_gpiolib_request, \
.direction_input = at91_gpiolib_direction_input, \
.direction_output = at91_gpiolib_direction_output, \
.get = at91_gpiolib_get, \
@@ -588,19 +586,6 @@
__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
}
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
- unsigned pin = chip->base + offset;
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- /* Cannot request GPIOs that are in alternate function mode */
- if (!(__raw_readl(pio + PIO_PSR) & mask))
- return -EPERM;
-
- return 0;
-}
-
static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
int i;
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca..87de8be 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */
+
#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 0000000..a526869
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,155 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */
+#define AT91SAM9G45_ID_US0 7 /* USART 0 */
+#define AT91SAM9G45_ID_US1 8 /* USART 1 */
+#define AT91SAM9G45_ID_US2 9 /* USART 2 */
+#define AT91SAM9G45_ID_US3 10 /* USART 3 */
+#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS 0xfff78000
+#define AT91SAM9G45_BASE_TCB0 0xfff7c000
+#define AT91SAM9G45_BASE_TC0 0xfff7c000
+#define AT91SAM9G45_BASE_TC1 0xfff7c040
+#define AT91SAM9G45_BASE_TC2 0xfff7c080
+#define AT91SAM9G45_BASE_MCI0 0xfff80000
+#define AT91SAM9G45_BASE_TWI0 0xfff84000
+#define AT91SAM9G45_BASE_TWI1 0xfff88000
+#define AT91SAM9G45_BASE_US0 0xfff8c000
+#define AT91SAM9G45_BASE_US1 0xfff90000
+#define AT91SAM9G45_BASE_US2 0xfff94000
+#define AT91SAM9G45_BASE_US3 0xfff98000
+#define AT91SAM9G45_BASE_SSC0 0xfff9c000
+#define AT91SAM9G45_BASE_SSC1 0xfffa0000
+#define AT91SAM9G45_BASE_SPI0 0xfffa4000
+#define AT91SAM9G45_BASE_SPI1 0xfffa8000
+#define AT91SAM9G45_BASE_AC97C 0xfffac000
+#define AT91SAM9G45_BASE_TSC 0xfffb0000
+#define AT91SAM9G45_BASE_ISI 0xfffb4000
+#define AT91SAM9G45_BASE_PWMC 0xfffb8000
+#define AT91SAM9G45_BASE_EMAC 0xfffbc000
+#define AT91SAM9G45_BASE_AES 0xfffc0000
+#define AT91SAM9G45_BASE_TDES 0xfffc4000
+#define AT91SAM9G45_BASE_SHA 0xfffc8000
+#define AT91SAM9G45_BASE_TRNG 0xfffcc000
+#define AT91SAM9G45_BASE_MCI1 0xfffd0000
+#define AT91SAM9G45_BASE_TCB1 0xfffd4000
+#define AT91SAM9G45_BASE_TC3 0xfffd4000
+#define AT91SAM9G45_BASE_TC4 0xfffd4040
+#define AT91SAM9G45_BASE_TC5 0xfffd4080
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9G45_BASE_US0
+#define AT91_USART1 AT91SAM9G45_BASE_US1
+#define AT91_USART2 AT91SAM9G45_BASE_US2
+#define AT91_USART3 AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0 0
+#define AT_DMA_ID_SPI0_TX 1
+#define AT_DMA_ID_SPI0_RX 2
+#define AT_DMA_ID_SPI1_TX 3
+#define AT_DMA_ID_SPI1_RX 4
+#define AT_DMA_ID_SSC0_TX 5
+#define AT_DMA_ID_SSC0_RX 6
+#define AT_DMA_ID_SSC1_TX 7
+#define AT_DMA_ID_SSC1_RX 8
+#define AT_DMA_ID_AC97_TX 9
+#define AT_DMA_ID_AC97_RX 10
+#define AT_DMA_ID_MCI1 13
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 0000000..c972d60
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ * Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
+#define AT91_MATRIX_ULBT_128 (7 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
+#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
+#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
+
+#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */
+#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
+#define AT91C_VDEC_SEL_OFF (0 << 0)
+#define AT91C_VDEC_SEL_ON (1 << 0)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff8..13f27a4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
/* USB Device */
struct at91_udc_data {
@@ -80,7 +81,8 @@
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
#define eth_platform_data at91_eth_data
#endif
@@ -90,6 +92,7 @@
u8 vbus_pin[2]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
@@ -105,7 +108,11 @@
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
@@ -168,10 +175,7 @@
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
/* AC97 */
-struct atmel_ac97_data {
- u8 reset_pin; /* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
extern void __init at91_add_device_isi(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e..34a9502 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,8 +21,10 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G10 0x819903a0
#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91SAM9G45 0x819b05a0
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
@@ -39,6 +41,15 @@
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
}
+#define ARCH_EXID_AT91SAM9M11 0x00000001
+#define ARCH_EXID_AT91SAM9M10 0x00000002
+#define ARCH_EXID_AT91SAM9G45 0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+ return at91_sys_read(AT91_DBGU_EXID);
+}
+
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
@@ -87,6 +98,12 @@
#define cpu_is_at91sam9261() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10() (at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91SAM9263
#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
#else
@@ -99,6 +116,12 @@
#define cpu_is_at91sam9rl() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91CAP9
#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681..a0df8b0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,12 +20,14 @@
#include <mach/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
#include <mach/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <mach/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c994..31ac2d9 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK 133000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91SAM9263)
#if defined(CONFIG_MACH_USB_A9263)
@@ -62,6 +67,11 @@
#define AT91SAM9_MASTER_CLOCK 132096000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK 133333333
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91CAP9)
#define AT91CAP9_MASTER_CLOCK 100000000
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe..4028724 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+ || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 0000000..457b438
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+ prompt "Processor selection in BCMRING family of devices"
+ depends on ARCH_BCMRING
+ default ARCH_BCM11107
+
+config ARCH_FPGA11107
+ bool "FPGA11107"
+
+config ARCH_BCM11107
+ bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+ depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+ hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 0000000..f8d9fce
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 0000000..fb53b28
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y := $(CONFIG_BCM_ZRELADDR)
+params_phys-y := 0x00000800
+
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 0000000..0da693b
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+ EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM 1
+#define CTL_BCM_REBOOT 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+ {
+ .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+ .procname = "warm",
+ .data = &bcmring_arch_warm_reboot,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec},
+ {}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+ {
+ .ctl_name = CTL_BCM_REBOOT,
+ .procname = "reboot",
+ .mode = 0555,
+ .child = bcmring_sysctl_warm_reboot},
+ {}
+};
+
+static struct platform_device nand_device = {
+ .name = "bcm-nand",
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &nand_device,
+};
+
+/****************************************************************************
+*
+* Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+* The customize_machine function is tagged as an arch_initcall
+* (see include/linux/init.h for the order that the various init sections
+* are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+ bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+ /* Enable spread spectrum */
+ chipcHw_enableSpreadSpectrum();
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ bcmring_amba_init();
+
+ dma_init();
+}
+
+/****************************************************************************
+*
+* Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+* passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+ struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+ printk(KERN_NOTICE "bcmring_fixup\n");
+ t->hdr.tag = ATAG_CORE;
+ t->hdr.size = tag_size(tag_core);
+ t->u.core.flags = 0;
+ t->u.core.pagesize = PAGE_SIZE;
+ t->u.core.rootdev = 31 << 8 | 0;
+ t = tag_next(t);
+
+ t->hdr.tag = ATAG_MEM;
+ t->hdr.size = tag_size(tag_mem32);
+ t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+ t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+ t = tag_next(t);
+
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+* Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+ /* Maintainer: Broadcom Corporation */
+ .phys_io = MM_IO_START,
+ .io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+ .fixup = bcmring_fixup,
+ .map_io = bcmring_map_io,
+ .init_irq = bcmring_init_irq,
+ .timer = &bcmring_timer,
+ .init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 0000000..14bafc3
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ /* enable parent clock first */
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->use_cnt++ == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Enable(clk->rate_hz, 0);
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Enable(clk->rate_hz);
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockEnable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockEnable(clk->csp_id);
+ }
+ }
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ BUG_ON(clk->use_cnt == 0);
+
+ if (--clk->use_cnt == 0) {
+ if (clk_is_pll1(clk)) { /* PLL1 */
+ chipcHw_pll1Disable();
+ } else if (clk_is_pll2(clk)) { /* PLL2 */
+ chipcHw_pll2Disable();
+ } else if (clk_is_using_xtal(clk)) { /* source is crystal */
+ if (!clk_is_primary(clk))
+ chipcHw_bypassClockDisable(clk->csp_id);
+ } else { /* source is PLL */
+ chipcHw_setClockDisable(clk->csp_id);
+ }
+ }
+
+ if (clk->parent)
+ __clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (!clk)
+ return 0;
+
+ return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned long actual;
+ unsigned long rate_hz;
+
+ if (!clk)
+ return -EINVAL;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+
+ if (clk->use_cnt)
+ return -EBUSY;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ actual = clk->parent->rate_hz;
+ rate_hz = min(actual, rate);
+ rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+ clk->rate_hz = rate_hz;
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return NULL;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ struct clk *old_parent;
+
+ if (!clk || !parent)
+ return -EINVAL;
+
+ if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+ return -EINVAL;
+
+ /* if more than one user, parent is not allowed */
+ if (clk->use_cnt > 1)
+ return -EBUSY;
+
+ if (clk->parent == parent)
+ return 0;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ old_parent = clk->parent;
+ clk->parent = parent;
+ if (clk_is_using_xtal(parent))
+ clk->mode |= CLK_MODE_XTAL;
+ else
+ clk->mode &= (~CLK_MODE_XTAL);
+
+ /* if clock is active */
+ if (clk->use_cnt != 0) {
+ clk->use_cnt--;
+ /* enable clock with the new parent */
+ __clk_enable(clk);
+ /* disable the old parent */
+ __clk_disable(old_parent);
+ }
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 0000000..5e0b981
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1 2 /* PPL1 */
+#define CLK_TYPE_PLL2 4 /* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */
+
+#define CLK_MODE_XTAL 1 /* clock source is from crystal */
+
+struct clk {
+ const char *name; /* clock name */
+ unsigned int type; /* clock type */
+ unsigned int mode; /* current mode */
+ volatile int use_bypass; /* indicate if it's in bypass mode */
+ chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */
+ unsigned long rate_hz; /* clock rate in Hz */
+ unsigned int use_cnt; /* usage count */
+ struct clk *parent; /* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 0000000..492c649
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ * derived from linux/arch/arm/mach-versatile/core.c
+ * linux/arch/arm/mach-bcmring/core.c
+ *
+ * Copyright (C) 1999 - 2003 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size) \
+static struct amba_device name##_device = { \
+ .dev = { \
+ .coherent_dma_mask = ~0, \
+ .init_name = initname, \
+ .platform_data = plat \
+ }, \
+ .res = { \
+ .start = MM_ADDR_IO_##base, \
+ .end = MM_ADDR_IO_##base + (size) - 1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ .dma_mask = ~0, \
+ .irq = { \
+ IRQ_##base \
+ } \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+ .name = "PLL1",
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+ .rate_hz = 2000000000,
+ .use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+ .name = "UART",
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .csp_id = chipcHw_CLOCK_UART,
+ .rate_hz = HW_CFG_UART_CLK_HZ,
+ .parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+ { /* UART0 */
+ .dev_id = "uarta",
+ .clk = &uart_clk,
+ }, { /* UART1 */
+ .dev_id = "uartb",
+ .clk = &uart_clk,
+ }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uartA_device,
+ &uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+ int i;
+ u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+ secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+ secHw_BLK_MASK_KEY_SCAN |
+ secHw_BLK_MASK_TOUCH_SCREEN |
+ secHw_BLK_MASK_UART0 |
+ secHw_BLK_MASK_UART1 |
+ secHw_BLK_MASK_WATCHDOG |
+ secHw_BLK_MASK_SPUM |
+ secHw_BLK_MASK_DDR2 |
+ secHw_BLK_MASK_SPU |
+ secHw_BLK_MASK_PKA |
+ secHw_BLK_MASK_RNG |
+ secHw_BLK_MASK_RTC |
+ secHw_BLK_MASK_OTP |
+ secHw_BLK_MASK_BOOT |
+ secHw_BLK_MASK_MPU |
+ secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+ /* Only the devices attached to the AMBA bus are enabled just before the bus is */
+ /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+ /* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+ /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+ bus_clock = chipcHw_REG_BUS_CLOCK_GE
+ | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+ chipcHw_busInterfaceClockEnable(bus_clock);
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE MM_IO_BASE_TMR
+#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
+
+/*
+ * These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
+#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
+#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
+#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD (TIMER_INTERVAL)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
+#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+ ctrl = TIMER_CTRL_PERIODIC;
+ ctrl |=
+ TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+ TIMER_CTRL_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TIMER_CTRL_ONESHOT;
+ ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+ writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+ .name = "timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = timer_set_mode,
+ .set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &timer0_clockevent;
+
+ writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+ .name = "bcmring Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+ return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+ return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+ .name = "timer1",
+ .rating = 200,
+ .read = bcmring_get_cycles_timer1,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+ .name = "timer3",
+ .rating = 100,
+ .read = bcmring_get_cycles_timer3,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+ /* setup timer1 as free-running clocksource */
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER1_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer1.mult =
+ clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+ clocksource_bcmring_timer1.shift);
+ clocksource_register(&clocksource_bcmring_timer1);
+
+ /* setup timer3 as free-running clocksource */
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER3_VA_BASE + TIMER_CTRL);
+
+ clocksource_bcmring_timer3.mult =
+ clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+ clocksource_bcmring_timer3.shift);
+ clocksource_register(&clocksource_bcmring_timer3);
+
+ return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+ printk(KERN_INFO "bcmring_init_timer\n");
+ /*
+ * Initialise to a known state (all timers off)
+ */
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+ /*
+ * Make irqs happen for the system timer
+ */
+ setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+ bcmring_clocksource_init();
+
+ timer0_clockevent.mult =
+ div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+ timer0_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+ timer0_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xf, &timer0_clockevent);
+
+ timer0_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+ .init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 0000000..b197ba4
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/arm/mach-versatile/core.h
+ *
+ * Copyright (C) 2004 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 0000000..648c037
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 0000000..6739527
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 0000000..b3a61d8
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw.c
+*
+* @brief Low level Various CHIP clock controlling routines
+*
+* @note
+*
+* These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT 0xFFFF /* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS 10 /* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK 1 /* PLL Clock */
+#define NON_PLL_CLOCK 2 /* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+ __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) {
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
+ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
+ uint32_t dependentClockType = 0;
+ uint32_t vcoHz = 0;
+
+ /* Get VCO frequencies */
+ if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ uint64_t adjustFreq = 0;
+
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+ adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+ (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+ vcoFreqPll1Hz += (uint32_t) adjustFreq;
+ } else {
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+ }
+ vcoFreqPll2Hz =
+ chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ vcoHz = vcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ pDependentClock = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ pDependentClock = &pChipcHw->ACLKClock;
+ dependentClockType = NON_PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ pDependentClock = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ /* Obtain PLL clock frequency */
+ if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ /* Return crystal clock frequency when bypassed */
+ return chipcHw_XTAL_FREQ_Hz;
+ } else if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR frequency is configured in PLLDivider register */
+ return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ } else {
+ /* From chip revision number B0, LCD clock is internally divided by 2 */
+ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+ vcoHz >>= 1;
+ }
+ /* Obtain PLL clock frequency using VCO dividers */
+ return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ }
+ } else if (pClockCtrl) {
+ /* Obtain divider clock frequency */
+ uint32_t div;
+ uint32_t freq = 0;
+
+ if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ /* Return crystal clock frequency when bypassed */
+ return chipcHw_XTAL_FREQ_Hz;
+ } else if (pDependentClock) {
+ /* Identify the dependent clock frequency */
+ switch (dependentClockType) {
+ case PLL_CLOCK:
+ if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+ /* Use crystal clock frequency when dependent PLL clock is bypassed */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ } else {
+ /* Obtain PLL clock frequency using VCO dividers */
+ div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+ freq = div ? chipcHw_divide(vcoHz, div) : 0;
+ }
+ break;
+ case NON_PLL_CLOCK:
+ if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+ } else {
+ if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+ /* Use crystal clock frequency when dependent divider clock is bypassed */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ } else {
+ /* Obtain divider clock frequency using XTAL dividers */
+ div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+ }
+ }
+ break;
+ }
+ } else {
+ /* Dependent on crystal clock */
+ freq = chipcHw_XTAL_FREQ_Hz;
+ }
+
+ div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ return chipcHw_divide(freq, (div ? div : 256));
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) {
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+ volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+ uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */
+ uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */
+ uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */
+ uint32_t dependentClockType = 0;
+ uint32_t vcoHz = 0;
+ uint32_t desVcoHz = 0;
+
+ /* Get VCO frequencies */
+ if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ uint64_t adjustFreq = 0;
+
+ vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+ adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+ (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+ vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+ /* Desired VCO frequency */
+ desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+ } else {
+ vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+ chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+ }
+ vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+ ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ /* Configure the DDR_ctrl:BUS ratio settings */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+ pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+ << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ pPLLReg = &pChipcHw->DDRClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_VPM:
+ /* Configure the VPM:BUS ratio settings */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+ << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ pPLLReg = &pChipcHw->VPMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ pDependentClock = &pChipcHw->ARMClock;
+ vcoHz = vcoFreqPll1Hz;
+ desVcoHz = desVcoFreqPll1Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ pDependentClock = &pChipcHw->ACLKClock;
+ dependentClockType = NON_PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ pDependentClock = &pChipcHw->APMClock;
+ vcoHz = vcoFreqPll2Hz;
+ desVcoHz = vcoFreqPll2Hz;
+ dependentClockType = PLL_CLOCK;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ /* Select XTAL as bypass source */
+ reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+ reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ /* For DDR settings use only the PLL divider clock */
+ if (pPLLReg == &pChipcHw->DDRClock) {
+ /* Set M1DIV for PLL1, which controls the DDR clock */
+ reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+ /* Calculate expected frequency */
+ freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+ } else {
+ /* From chip revision number B0, LCD clock is internally divided by 2 */
+ if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+ desVcoHz >>= 1;
+ vcoHz >>= 1;
+ }
+ /* Set MDIV to change the frequency */
+ reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+ reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+ /* Calculate expected frequency */
+ freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+ }
+ /* Wait for for atleast 200ns as per the protocol to change frequency */
+ udelay(1);
+ /* Do not bypass */
+ reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ /* Return the configured frequency */
+ return freq;
+ } else if (pClockCtrl) {
+ uint32_t divider = 0;
+
+ /* Divider clock should not be bypassed */
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+ /* Identify the clock source */
+ if (pDependentClock) {
+ switch (dependentClockType) {
+ case PLL_CLOCK:
+ divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+ break;
+ case NON_PLL_CLOCK:
+ {
+ uint32_t sourceClock = 0;
+
+ if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+ sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+ } else {
+ uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+ sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+ }
+ divider = chipcHw_divide(sourceClock, freq);
+ }
+ break;
+ }
+ } else {
+ divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+ }
+
+ if (divider) {
+ REG_LOCAL_IRQ_SAVE;
+ /* Set the divider to obtain the required frequency */
+ *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+ REG_LOCAL_IRQ_RESTORE;
+ return freq;
+ }
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success (# of adjustment required)
+* -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+ uint32_t phaseControl;
+ uint32_t phaseValue;
+ uint32_t prevPhaseComp;
+ int iter = 0;
+ int adjustCount = 0;
+ int count = 0;
+
+ for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+ phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+ phaseValue = 0;
+ prevPhaseComp = 0;
+
+ /* Step 1: Look for falling PH_COMP transition */
+
+ /* Read the contents of VPM Clock resgister */
+ phaseValue = pChipcHw->VPMClock;
+ do {
+ /* Store previous value of phase comparator */
+ prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Read the contents of VPM Clock resgister. */
+ phaseValue = pChipcHw->VPMClock;
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ } else {
+ /* Increment to the Phase count value for next write, if Phase is not stable. */
+ phaseControl = (0x3F & (phaseControl + 1));
+ }
+ /* Count number of adjustment made */
+ adjustCount++;
+ } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */
+ ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && /* Look for a falling edge */
+ (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */
+ );
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+ for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+ phaseControl = (0x3F & (phaseControl + 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if (count != 5) {
+ /* Detected false transition */
+ continue;
+ }
+
+ /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+ for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if (count != 3) {
+ /* Detected noisy transition */
+ continue;
+ }
+
+ /* Step 4: Keep moving backward before the original transition took place. */
+
+ for (count = 0; (count < 5); count++) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ phaseValue = pChipcHw->VPMClock;
+ /* Count number of adjustment made */
+ adjustCount++;
+ }
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ }
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+ /* Detected false transition */
+ continue;
+ }
+
+ /* Step 5: Re discover the valid transition */
+
+ do {
+ /* Store previous value of phase comparator */
+ prevPhaseComp = phaseValue;
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^=
+ chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Read the contents of VPM Clock resgister. */
+ phaseValue = pChipcHw->VPMClock;
+
+ if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+ phaseControl = (0x3F & (phaseControl - 1));
+ } else {
+ /* Increment to the Phase count value for next write, if Phase is not stable. */
+ phaseControl = (0x3F & (phaseControl + 1));
+ }
+
+ /* Count number of adjustment made */
+ adjustCount++;
+ } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+ if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+ /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+ return -1;
+ } else {
+ /* Valid phase must have detected */
+ break;
+ }
+ }
+
+ /* For VPM Phase should be perfectly aligned. */
+ phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+ /* Load new phase value */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ /* Return the status */
+ return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success (# of adjustment required)
+* -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+ if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+ return vpmPhaseAlignA0();
+ } else {
+ uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+ uint32_t phaseValue = 0;
+ int adjustCount = 0;
+
+ /* Disable VPM access */
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ /* Disable HW VPM phase alignment */
+ chipcHw_vpmHwPhaseAlignDisable();
+ /* Enable SW VPM phase alignment */
+ chipcHw_vpmSwPhaseAlignEnable();
+ /* Adjust VPM phase */
+ while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+ phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+ /* Adjust phase control value */
+ if (phaseValue > 0xF) {
+ /* Increment phase control value */
+ phaseControl++;
+ } else if (phaseValue < 0xF) {
+ /* Decrement phase control value */
+ phaseControl--;
+ } else {
+ /* Enable VPM access */
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ /* Return adjust count */
+ return adjustCount;
+ }
+ /* Change the value of PH_CTRL. */
+ reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+ /* Wait atleast 20 ns */
+ udelay(1);
+ /* Toggle the LOAD_CH after phase control is written. */
+ pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+ /* Count adjustment */
+ adjustCount++;
+ }
+ }
+
+ /* Disable VPM access */
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+ return -1;
+}
+
+/****************************************************************************/
+/**
+* @brief Local Divide function
+*
+* This function does the divide
+*
+* @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+ int r;
+ int t = 1;
+
+ /* Shift denom and t up to the largest value to optimize algorithm */
+ /* t contains the units of each divide */
+ while ((denom & 0x40000000) == 0) { /* fails if denom=0 */
+ denom = denom << 1;
+ t = t << 1;
+ }
+
+ /* Intialize the result */
+ r = 0;
+
+ do {
+ /* Determine if there exists a positive remainder */
+ if ((num - denom) >= 0) {
+ /* Accumlate t to the result and calculate a new remainder */
+ num = num - denom;
+ r = r + t;
+ }
+ /* Continue to shift denom and shift t down to 0 */
+ denom = denom >> 1;
+ t = t >> 1;
+ } while (t != 0);
+
+ return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 0000000..367df75
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_init.c
+*
+* @brief Low level CHIPC PLL configuration functions
+*
+* @note
+*
+* These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+ Calculation for NDIV_i to obtain VCO frequency
+ -----------------------------------------------
+
+ Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+ for Freq_vco = VCO_FREQ_MHz
+ Freq_ref = chipcHw_XTAL_FREQ_Hz
+ PLL_P1 = PLL_P2 = 1
+ and
+ PLL_NDIV_f = 0
+
+ We get:
+ PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+ Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+ -----------------------------------------------------------------
+ Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+ PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+* @brief Initializes the PLL2
+*
+* This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+ uint32_t pllPreDivider2 = 0;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 =
+ chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET;
+
+ pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+ (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+ /* Enable CHIPC registers to control the PLL */
+ pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+ /* Set pre divider to get desired VCO frequency */
+ pChipcHw->PLLPreDivider2 = pllPreDivider2;
+ /* Set NDIV Frac */
+ pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+ /* This has to be removed once the default values are fixed for PLL2. */
+ pChipcHw->PLLControl12 = 0x38000700;
+ pChipcHw->PLLControl22 = 0x00000015;
+
+ /* Reset PLL2 */
+ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+ pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ } else {
+ pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+ }
+
+ /* Insert certain amount of delay before deasserting ARESET. */
+ udelay(1);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove analog reset and Power on the PLL */
+ pChipcHw->PLLConfig2 &=
+ ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+ REG_LOCAL_IRQ_RESTORE;
+
+ }
+
+ /* Wait until PLL is locked */
+ while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ ;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove digital reset */
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+* @brief Initializes the PLL1
+*
+* This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+ uint32_t pllPreDivider = 0;
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->PLLConfig =
+ chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET;
+ /* Setting VCO frequency */
+ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+ pllPreDivider =
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+ ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+ 1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+ } else {
+ pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+ (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+ chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+ (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+ chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+ }
+
+ /* Enable CHIPC registers to control the PLL */
+ pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+ /* Set pre divider to get desired VCO frequency */
+ pChipcHw->PLLPreDivider = pllPreDivider;
+ /* Set NDIV Frac */
+ if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+ pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+ chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+ } else {
+ pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+ chipcHw_REG_PLL_DIVIDER_NDIV_f;
+ }
+
+ /* Reset PLL1 */
+ if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+ pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ } else {
+ pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+ chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ }
+
+ REG_LOCAL_IRQ_RESTORE;
+
+ /* Insert certain amount of delay before deasserting ARESET. */
+ udelay(1);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ /* Remove analog reset and Power on the PLL */
+ pChipcHw->PLLConfig &=
+ ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+ chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+ REG_LOCAL_IRQ_RESTORE;
+ }
+
+ /* Wait until PLL is locked */
+ while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+ || !(pChipcHw->
+ PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+ ;
+
+ /* Remove digital reset */
+ {
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+ REG_LOCAL_IRQ_RESTORE;
+ }
+ }
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+* @brief Initializes the chipc module
+*
+* This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+ delay_init();
+#endif
+
+ /* Do not program PLL, when warm reset */
+ if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+ chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+ initParam->ssSupport);
+ chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+ } else {
+ /* Clear sticky bits */
+ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+ }
+ /* Clear sticky bits */
+ chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+ /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+ pChipcHw->ACLKClock =
+ (pChipcHw->
+ ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+ armBusRatio &
+ chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+ /* Set various core component frequencies. The order in which this is done is important for some. */
+ /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+ /* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */
+ /* then VPM and RTBUS. */
+
+ chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+ initParam->busClockFreqHz *
+ initParam->armBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+ initParam->busClockFreqHz *
+ initParam->vpmBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+ initParam->busClockFreqHz *
+ initParam->ddrBusRatio);
+ chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+ initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 0000000..2671d88
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+* @brief warmReset
+*
+* @note warmReset configures the clocks which are not reset back to the state
+* required to execute on reset. To do so we need to copy the code into internal
+* memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+ int i = 0;
+ RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+ /* Disable all interrupts */
+ intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+ intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+ intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+ chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ /* Bypass the PLL clocks before reboot */
+ pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+ pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+ /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+ do {
+ ((uint32_t *) MM_IO_BASE_ARAM)[i] =
+ ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+ i++;
+ } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+ CSP_CACHE_FLUSH_ALL;
+
+ /* run the function from ARAM */
+ runFunc();
+
+ /* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop \n\t"
+ " nop \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ " MRC p15,#0x0,r0,c1,c0,#0 \n\t"
+ " BIC r0,r0,#0xd \n\t"
+ " MCR p15,#0x0,r0,c1,c0,#0 \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+#endif
+ " nop \n\t"
+ " nop \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+ " MOV r2,#0x80000000 \n\t"
+ " LDR r3,[r2,#8] \n\t"
+ " ORR r3,r3,#0x20000 \n\t"
+ " STR r3,[r2,#8] \n\t"
+
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+ " nop \n\t"
+/* Issue reset */
+ " MOV r3,#0x2 \n\t"
+ " STR r3,[r2,#0x80] \n\t"
+/* End here */
+ " MOV pc,pc \n\t");
+/* 0xe1a0f00f == asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 0000000..54ad964
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+* @file chipcHw_str.c
+*
+* @brief Contains strings which are useful to linux and csp
+*
+* @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+ "GPIO", /* 0 */
+ "KeyPad", /* 1 */
+ "I2C-Host", /* 2 */
+ "SPI", /* 3 */
+ "Uart", /* 4 */
+ "LED-Mtx-P", /* 5 */
+ "LED-Mtx-S", /* 6 */
+ "SDIO-0", /* 7 */
+ "SDIO-1", /* 8 */
+ "PCM", /* 9 */
+ "I2S", /* 10 */
+ "ETM", /* 11 */
+ "Debug", /* 12 */
+ "Misc", /* 13 */
+ "0xE", /* 14 */
+ "0xF", /* 15 */
+};
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+ if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+ return "";
+ }
+
+ return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 0000000..fb1104f
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 0000000..7b9bac2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.c
+*
+* @brief Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+* @brief Get maximum FIFO for a DMA channel
+*
+* @return Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ uint32_t val = 0;
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_MISC_t *pMiscReg =
+ (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+ switch (pCblk->channel) {
+ case 0:
+ val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+ break;
+ case 1:
+ val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+ break;
+ case 2:
+ val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+ break;
+ case 3:
+ val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+ break;
+ case 4:
+ val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+ break;
+ case 5:
+ val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+ break;
+ case 6:
+ val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+ break;
+ case 7:
+ val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+ break;
+ }
+
+ if (val <= 0x4) {
+ return 8 << val;
+ } else {
+ dmacHw_ASSERT(0);
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pProg;
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Not safe yet to program the channel */
+ return;
+ }
+
+ if (pCblk->varDataStarted) {
+ if (pCblk->descUpdated) {
+ pCblk->descUpdated = 0;
+ pProg =
+ (dmacHw_DESC_t *) ((uint32_t)
+ dmacHw_REG_LLP(pCblk->module,
+ pCblk->channel) +
+ pRing->virt2PhyOffset);
+
+ /* Load descriptor if not loaded */
+ if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+ dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+ pProg->sar);
+ dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+ pProg->dar);
+ dmacHw_REG_CTL_LO(pCblk->module,
+ pCblk->channel) =
+ pProg->ctl.lo;
+ dmacHw_REG_CTL_HI(pCblk->module,
+ pCblk->channel) =
+ pProg->ctl.hi;
+ } else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+ /* Return as end descriptor is processed */
+ return;
+ } else {
+ dmacHw_ASSERT(0);
+ }
+ } else {
+ return;
+ }
+ } else {
+ if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+ /* Do not make a single chain, rather process one descriptor at a time */
+ pProg = pRing->pHead;
+ /* Point to the next descriptor for next iteration */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ } else {
+ /* Return if no more pending descriptor */
+ if (pRing->pEnd == NULL) {
+ return;
+ }
+
+ pProg = pRing->pProg;
+ if (pConfig->transferMode ==
+ dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ /* Make sure a complete ring can be formed */
+ dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+ llp == pRing->pProg);
+ /* Make sure pProg pointing to the pHead */
+ dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+ pRing->pHead);
+ /* Make a complete ring */
+ do {
+ pRing->pProg->ctl.lo |=
+ (dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ pRing->pProg =
+ (dmacHw_DESC_t *) pRing->pProg->llp;
+ } while (pRing->pProg != pRing->pHead);
+ } else {
+ /* Make a single long chain */
+ while (pRing->pProg != pRing->pEnd) {
+ pRing->pProg->ctl.lo |=
+ (dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ pRing->pProg =
+ (dmacHw_DESC_t *) pRing->pProg->llp;
+ }
+ }
+ }
+
+ /* Program the channel registers */
+ dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+ dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+ pProg->ctl.lo;
+ dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+ pProg->ctl.hi;
+ if (pRing->pEnd) {
+ /* Remember the descriptor to use next */
+ pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+ }
+ /* Indicate no more pending descriptor */
+ pRing->pEnd = (dmacHw_DESC_t *) NULL;
+ }
+ /* Start DMA operation */
+ dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+ uint32_t i = 0;
+
+ dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+ dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+ /* Enable access to the DMA block */
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+ chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+ if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+ dmacHw_ASSERT(0);
+ }
+
+ memset((void *)dmacHw_gCblk, 0,
+ sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+ for (i = 0; i < dmaChannelCount_0; i++) {
+ dmacHw_gCblk[i].module = 0;
+ dmacHw_gCblk[i].channel = i;
+ }
+ for (i = 0; i < dmaChannelCount_1; i++) {
+ dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+ dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+ /* Disable access to the DMA block */
+ chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+ chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ ) {
+ int idx;
+
+ switch ((channelId >> 8)) {
+ case 0:
+ dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+ idx = (channelId & 0xff);
+ break;
+ case 1:
+ dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+ idx = dmaChannelCount_0 + (channelId & 0xff);
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ return (dmacHw_HANDLE_t) -1;
+ }
+
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ int module = pCblk->module;
+ int channel = pCblk->channel;
+
+ /* Reinitialize the control block */
+ memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+ pCblk->module = module;
+ pCblk->channel = channel;
+
+ /* Enable DMA controller */
+ dmacHw_DMA_ENABLE(pCblk->module);
+ /* Reset DMA channel */
+ dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+ dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+ /* Clear all raw interrupt status */
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+ /* Mask event specific interrupts */
+ dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ ) {
+ /* Need extra 4 byte to ensure 32 bit alignment */
+ return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+ sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+* accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ ) {
+ uint32_t i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ /* Check the alignment of the descriptor */
+ if ((uint32_t) pDescriptorVirt & 0x00000003) {
+ dmacHw_ASSERT(0);
+ return -1;
+ }
+
+ /* Check if enough space has been allocated for descriptor ring */
+ if (len < dmacHw_descriptorLen(num)) {
+ return -1;
+ }
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+ pRing->pHead =
+ (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+ /* Initialize link item chain, starting from the head */
+ pDesc = pRing->pHead;
+ /* Find the offset between virtual to physical address */
+ pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+ /* Form the descriptor ring */
+ for (i = 0; i < num - 1; i++) {
+ /* Clear link list item */
+ memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+ /* Point to the next item in the physical address */
+ pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+ /* Point to the next item in the virtual address */
+ pDesc->llp = (uint32_t) (pDesc + 1);
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+
+ /* Clear last link list item */
+ memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+ /* Last item pointing to the first item in the
+ physical address to complete the ring */
+ pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+ /* Last item pointing to the first item in the
+ virtual address to complete the ring
+ */
+ pDesc->llp = (uint32_t) pRing->pHead;
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Set the number of descriptors in the ring */
+ pRing->num = num;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ uint32_t cfgHigh = 0;
+ int srcTrSize;
+ int dstTrSize;
+
+ pCblk->varDataStarted = 0;
+ pCblk->userData = NULL;
+
+ /* Configure
+ - Burst transaction when enough data in available in FIFO
+ - AHB Access protection 1
+ - Source and destination peripheral ports
+ */
+ cfgHigh =
+ dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+ dmacHw_SRC_PERI_INTF(pConfig->
+ srcPeripheralPort) |
+ dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+ /* Set priority */
+ dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+ pConfig->channelPriority);
+
+ if (pConfig->dstStatusRegisterAddress != 0) {
+ /* Destination status update enable */
+ cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+ /* Configure status registers */
+ dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+ pConfig->dstStatusRegisterAddress);
+ }
+
+ if (pConfig->srcStatusRegisterAddress != 0) {
+ /* Source status update enable */
+ cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+ /* Source status update enable */
+ dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+ pConfig->srcStatusRegisterAddress);
+ }
+ /* Configure the config high register */
+ dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+ /* Clear all raw interrupt status */
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+ /* Configure block interrupt */
+ if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure complete transfer interrupt */
+ if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure error interrupt */
+ if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+ dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+ } else {
+ dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+ }
+ /* Configure gather register */
+ if (pConfig->srcGatherWidth) {
+ srcTrSize =
+ dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ if (!
+ ((pConfig->srcGatherWidth % srcTrSize)
+ && (pConfig->srcGatherJump % srcTrSize))) {
+ dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+ ((pConfig->srcGatherWidth /
+ srcTrSize) << 20) | (pConfig->srcGatherJump /
+ srcTrSize);
+ } else {
+ return -1;
+ }
+ }
+ /* Configure scatter register */
+ if (pConfig->dstScatterWidth) {
+ dstTrSize =
+ dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ if (!
+ ((pConfig->dstScatterWidth % dstTrSize)
+ && (pConfig->dstScatterJump % dstTrSize))) {
+ dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+ ((pConfig->dstScatterWidth /
+ dstTrSize) << 20) | (pConfig->dstScatterJump /
+ dstTrSize);
+ } else {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ return dmacHw_TRANSFER_STATUS_BUSY;
+ } else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+ (0x00000001 << pCblk->channel)) {
+ return dmacHw_TRANSFER_STATUS_ERROR;
+ }
+
+ return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+ dmacHw_DESC_t *pProg;
+ int srcTs = 0;
+ int blkTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int count = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if ((pConfig->srcGatherWidth % srcTrSize)
+ || (pConfig->dstScatterWidth % dstTrSize)) {
+ return -2;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ /* Check the availability of "descCount" discriptors in the ring */
+ pProg = pRing->pHead;
+ for (count = 0; (descCount <= pRing->num) && (count < descCount);
+ count++) {
+ if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ /* Sufficient descriptors are not available */
+ return -3;
+ }
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ }
+
+ /* Remember the link list item to program the channel registers */
+ pStart = pProg = pRing->pHead;
+ /* Make a link list with "descCount(=count)" number of descriptors */
+ while (count) {
+ /* Reset channel control information */
+ pProg->ctl.lo = 0;
+ /* Enable source gather if configured */
+ if (pConfig->srcGatherWidth) {
+ pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+ }
+ /* Enable destination scatter if configured */
+ if (pConfig->dstScatterWidth) {
+ pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+ }
+ /* Set source and destination address */
+ pProg->sar = (uint32_t) pSrcAddr;
+ pProg->dar = (uint32_t) pDstAddr;
+ /* Use "devCtl" to mark that user memory need to be freed later if needed */
+ if (pProg == pRing->pHead) {
+ pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+ } else {
+ pProg->devCtl = 0;
+ }
+
+ blkTs = srcTs;
+
+ /* Special treatmeant for last descriptor */
+ if (count == 1) {
+ /* Mark the last descriptor */
+ pProg->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Treatment for odd data bytes */
+ if (oddSize) {
+ /* Adjust for single byte transaction width */
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ dstTrWidth =
+ dmacHw_DST_TRANSACTION_WIDTH_8;
+ blkTs =
+ (oddSize / srcTrSize) +
+ ((oddSize % srcTrSize) ? 1 : 0);
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ srcTrWidth =
+ dmacHw_SRC_TRANSACTION_WIDTH_8;
+ blkTs = oddSize;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+ srcTrWidth =
+ dmacHw_SRC_TRANSACTION_WIDTH_8;
+ dstTrWidth =
+ dmacHw_DST_TRANSACTION_WIDTH_8;
+ blkTs = oddSize;
+ break;
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+ /* Do not adjust the transaction width */
+ break;
+ }
+ } else {
+ srcTs -= blkTs;
+ }
+ } else {
+ if (srcTs / maxBlockSize) {
+ blkTs = maxBlockSize;
+ }
+ /* Remaining source transactions for next iteration */
+ srcTs -= blkTs;
+ }
+ /* Must have a valid source transactions */
+ dmacHw_ASSERT(blkTs > 0);
+ /* Set control information */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pProg->ctl.lo |= pConfig->transferType |
+ pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ srcTrWidth |
+ dstTrWidth |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pProg->ctl.lo |= transferType |
+ pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ srcTrWidth |
+ dstTrWidth |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size */
+ pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ /* Look for next descriptor */
+ if (count > 1) {
+ /* Point to the next descriptor */
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+
+ /* Update source and destination address for next iteration */
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ if (pConfig->dstScatterWidth) {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->dstScatterWidth) *
+ pConfig->dstScatterJump);
+ } else {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ if (pConfig->srcGatherWidth) {
+ pSrcAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->srcGatherWidth) *
+ pConfig->srcGatherJump);
+ } else {
+ pSrcAddr =
+ (char *)pSrcAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+ if (pConfig->dstScatterWidth) {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->dstScatterWidth) *
+ pConfig->dstScatterJump);
+ } else {
+ pDstAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize;
+ }
+
+ if (pConfig->srcGatherWidth) {
+ pSrcAddr =
+ (char *)pDstAddr +
+ blkTs * srcTrSize +
+ (((blkTs * srcTrSize) /
+ pConfig->srcGatherWidth) *
+ pConfig->srcGatherJump);
+ } else {
+ pSrcAddr =
+ (char *)pSrcAddr +
+ blkTs * srcTrSize;
+ }
+ break;
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+ /* Do not adjust the address */
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ } else {
+ /* At the end of transfer "srcTs" must be zero */
+ dmacHw_ASSERT(srcTs == 0);
+ }
+ count--;
+ }
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pStart;
+ }
+ /* Indicate that the descriptor is updated */
+ pRing->pEnd = pProg;
+ /* Head pointing to the next descriptor */
+ pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+ /* Update Tail pointer if destination is a peripheral,
+ because no one is going to read from the pTail
+ */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ switch (attr) {
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+ return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+ return (1 <<
+ (dmacHw_GET_MAX_BLOCK_SIZE
+ (pCblk->module, pCblk->module) + 2)) - 8;
+ case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+ return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+ return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+ pCblk->channel);
+ case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+ return GetFifoSize(handle);
+ }
+ dmacHw_ASSERT(0);
+ return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 0000000..ff7b436
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_extra.c
+*
+* @brief Extra Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; /* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Helper function to display DMA registers
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit (0-1) */
+ int channel, /* [ IN ] DMA Channel (0-7) / -1(all) */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ int chan;
+
+ (*fpPrint) ("Displaying register content \n\n");
+ (*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt raw src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt stat transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt stat src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt mask transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt mask src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt clear transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt clear src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: SW source req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+ (*fpPrint) ("Module %d: SW source signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW source last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: misc config 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+ (*fpPrint) ("Module %d: misc channel enable 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+ (*fpPrint) ("Module %d: misc ID 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+ (*fpPrint) ("Module %d: misc test 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+ if (channel == -1) {
+ for (chan = 0; chan < 8; chan++) {
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+ } else {
+ chan = channel;
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Helper function to display descriptor ring
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+
+ if (pRing->pHead == NULL) {
+ return;
+ }
+
+ pStart = pRing->pHead;
+
+ while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+ pStart = (dmacHw_DESC_t *) pStart->llp;
+ }
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+* @brief Check if DMA channel is the flow controller
+*
+* @return 1 : If DMA is a flow controler
+* 0 : Peripheral is the flow controller
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ uint32_t ttfc =
+ (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+ lo & dmacHw_REG_CTL_TTFC_MASK;
+
+ switch (ttfc) {
+ case dmacHw_REG_CTL_TTFC_MM_DMAC:
+ case dmacHw_REG_CTL_TTFC_MP_DMAC:
+ case dmacHw_REG_CTL_TTFC_PM_DMAC:
+ case dmacHw_REG_CTL_TTFC_PP_DMAC:
+ return 1;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_DESC_t *pProg;
+ dmacHw_DESC_t *pHead;
+ int srcTs = 0;
+ int srcTrSize = 0;
+
+ pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+ pProg = pHead;
+
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ srcTs = dataLen / srcTrSize;
+ do {
+ pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ } while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+*
+* @return void
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+*
+* @note
+* Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+ if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_TRANS;
+ }
+ if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+ }
+ if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_ERROR;
+ }
+
+ return status;
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+ uint32_t i;
+
+ for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+ if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ ) {
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+ }
+ }
+ return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ int srcTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if (pConfig->srcGatherWidth % srcTrSize
+ || pConfig->dstScatterWidth % dstTrSize) {
+ return -1;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ return descCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ /* Make sure channel is not busy */
+ if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Check if pEnd is not processed */
+ if (pRing->pEnd) {
+ /* Something left for processing */
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ /* Stop the channel */
+ dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return On failure : -1
+* On success : Number of buffer freed
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t count = 0;
+
+ if (fpFree == NULL) {
+ return -1;
+ }
+
+ while ((pRing->pFree != pRing->pTail)
+ && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+ if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+ /* Identify, which memory to free */
+ if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ (*fpFree) ((void *)pRing->pFree->dar);
+ } else {
+ /* Destination was a peripheral */
+ (*fpFree) ((void *)pRing->pFree->sar);
+ }
+ /* Unmark user memory to indicate it is freed */
+ pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+ }
+ dmacHw_NEXT_DESC(pRing, pFree);
+
+ count++;
+ }
+
+ return count;
+}
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will update the discriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return On failure : -1
+* On success : Number of descriptor updated
+*
+*
+* @note
+* Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_t *pProg = NULL;
+ dmacHw_DESC_t *pLast = NULL;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t dstAddr;
+ uint32_t controlParam;
+ int i;
+
+ dmacHw_ASSERT(pConfig->transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+ if (num > pRing->num) {
+ return -1;
+ }
+
+ pLast = pRing->pEnd; /* Last descriptor updated */
+ pProg = pRing->pHead; /* First descriptor in the new list */
+
+ controlParam = pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ pConfig->srcMaxTransactionWidth |
+ pConfig->dstMaxTransactionWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ dmacHw_REG_CTL_TTFC_PM_PERI |
+ dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+ for (i = 0; i < num; i++) {
+ /* Allocate Rx buffer only for idle descriptor */
+ if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+ ) {
+ /* Rx descriptor is not idle */
+ break;
+ }
+ /* Set source address */
+ pRing->pHead->sar = srcAddr;
+ if (fpAlloc) {
+ /* Allocate memory for buffer in descriptor */
+ dstAddr = (uint32_t) (*fpAlloc) (len);
+ /* Check the destination address */
+ if (dstAddr == 0) {
+ if (i == 0) {
+ /* Not a single descriptor is available */
+ return -1;
+ }
+ break;
+ }
+ /* Set destination address */
+ pRing->pHead->dar = dstAddr;
+ }
+ /* Set control information */
+ pRing->pHead->ctl.lo = controlParam;
+ /* Use "devCtl" to mark the memory that need to be freed later */
+ pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+ /* Descriptor is now owned by the channel */
+ pRing->pHead->ctl.hi = 0;
+ /* Remember the descriptor last updated */
+ pRing->pEnd = pRing->pHead;
+ /* Update next descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ }
+
+ /* Mark the end of the list */
+ pRing->pEnd->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Connect the list */
+ if (pLast != pProg) {
+ pLast->ctl.lo |=
+ dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+ }
+ /* Mark the descriptors are updated */
+ pCblk->descUpdated = 1;
+ if (!pCblk->varDataStarted) {
+ /* LLP must be pointing to the first descriptor */
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ /* Channel, handling variable data started */
+ pCblk->varDataStarted = 1;
+ }
+
+ return i;
+}
+
+/****************************************************************************/
+/**
+* @brief Read data DMAed to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @param handle -
+* @param ppBbuf -
+* @param pLen -
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ (void)handle;
+
+ if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ (pRing->pTail == pRing->pHead)
+ ) {
+ /* No receive data available */
+ *ppBbuf = (char *)NULL;
+ *pLlen = 0;
+
+ return 0;
+ }
+ }
+
+ /* Return read buffer and length */
+ *ppBbuf = (char *)pRing->pTail->dar;
+
+ /* Extract length of the received data */
+ if (DmaIsFlowController(pDescriptor)) {
+ uint32_t srcTrSize = 0;
+
+ switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+ srcTrSize = 1;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+ srcTrSize = 2;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+ srcTrSize = 4;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+ srcTrSize = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ /* Calculate length from the block size */
+ *pLlen =
+ (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+ srcTrSize;
+ } else {
+ /* Extract length from the source peripheral */
+ *pLlen = pRing->pTail->sstat;
+ }
+
+ /* Advance tail to next descriptor */
+ dmacHw_NEXT_DESC(pRing, pTail);
+
+ return 1;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (ctlAddress == 0) {
+ return -1;
+ }
+
+ /* Check the availability of descriptors in the ring */
+ if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ return -1;
+ }
+ /* Set control information */
+ pRing->pHead->devCtl = control;
+ /* Set source and destination address */
+ pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+ pRing->pHead->dar = ctlAddress;
+ /* Set control parameters */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pRing->pHead->ctl.lo = pConfig->transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pRing->pHead->ctl.lo = transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size to one 32 bit transaction */
+ pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pRing->pHead;
+ }
+ pRing->pEnd = pRing->pHead;
+
+ /* Advance the descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+
+ /* Update Tail pointer if destination is a peripheral */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ int i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ pDesc = pRing->pHead;
+
+ for (i = 0; i < pRing->num; i++) {
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+ DisplayDescRing(pDescriptor, fpPrint);
+}
diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 0000000..244a61a
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 0000000..5c1c9a0
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.c
+*
+* @brief Low level Timer driver routines
+*
+* @note
+*
+* These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+ __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+ __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+) {
+ switch (capability) {
+ case tmrHw_CAPABILITY_CLOCK:
+ return (timerId <=
+ 1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+ tmrHw_HIGH_RESOLUTION_CLOCK;
+ case tmrHw_CAPABILITY_RESOLUTION:
+ return 32;
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets a timer
+*
+* This function initializes timer
+*
+* @return void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId /* [ IN ] Timer Id */
+) {
+ /* Reset timer */
+ pTmrHw[timerId].LoadValue = 0;
+ pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+ pTmrHw[timerId].Control = 0;
+ pTmrHw[timerId].BackgroundLoad = 0;
+ /* Always configure as a 32 bit timer */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+ /* Clear interrupt only if raw status interrupt is set */
+ if (pTmrHw[timerId].RawInterruptStatus) {
+ pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Sets counter value for an interval in ms
+*
+* @return On success: Effective counter value set
+* On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ uint32_t scale = 0;
+ uint32_t count = 0;
+
+ if (timerId == 0 || timerId == 1) {
+ if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+ } else {
+ return 0;
+ }
+
+ count = msec * scale;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+
+ } else if (timerId == 2 || timerId == 3) {
+ if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+ } else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+ } else {
+ return 0;
+ }
+
+ count = msec * scale;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+ }
+ return count / scale;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+) {
+ uint32_t resolution = 0;
+ uint32_t count = 0;
+ ResetTimer(timerId);
+
+ /* Set timer mode periodic */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+ /* Set timer in highest resolution */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+ if (rate && (timerId == 0 || timerId == 1)) {
+ if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+ return 0;
+ }
+ resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+ } else if (rate && (timerId == 2 || timerId == 3)) {
+ if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+ return 0;
+ } else {
+ resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+ }
+ } else {
+ return 0;
+ }
+ /* Find the counter value */
+ count = resolution / rate;
+ /* Set counter value */
+ pTmrHw[timerId].LoadValue = count;
+ pTmrHw[timerId].BackgroundLoad = count;
+
+ return resolution / count;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in millisecond
+*
+* @return On success: Effective interval set in milli-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ ResetTimer(timerId);
+
+ /* Set timer mode periodic */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+ return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in millisecond
+*
+* @return On success: Effective interval set in milli-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */
+) {
+ ResetTimer(timerId);
+
+ /* Set timer mode oneshot */
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+ return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) {
+ uint32_t scale = 0;
+
+ ResetTimer(timerId);
+ /* Set timer as free running mode */
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+ if (divider >= 64) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+ scale = 256;
+ } else if (divider >= 8) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+ scale = 16;
+ } else {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+ scale = 1;
+ }
+
+ if (timerId == 0 || timerId == 1) {
+ return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+ } else if (timerId == 2 || timerId == 3) {
+ return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ /* return 32 bit timer value */
+ switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+ case tmrHw_CONTROL_FREE_RUNNING:
+ if (pTmrHw[timerId].CurrentValue) {
+ return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+ }
+ break;
+ case tmrHw_CONTROL_PERIODIC:
+ case tmrHw_CONTROL_ONESHOT:
+ return pTmrHw[timerId].BackgroundLoad -
+ pTmrHw[timerId].CurrentValue;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ uint32_t divider = 0;
+
+ switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+ case tmrHw_CONTROL_PRESCALE_1:
+ divider = 1;
+ break;
+ case tmrHw_CONTROL_PRESCALE_16:
+ divider = 16;
+ break;
+ case tmrHw_CONTROL_PRESCALE_256:
+ divider = 256;
+ break;
+ default:
+ tmrHw_ASSERT(0);
+ }
+
+ if (timerId == 0 || timerId == 1) {
+ return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+ } else {
+ return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) {
+ if (pTmrHw[timerId].InterruptStatus) {
+ return tmrHw_INTERRUPT_STATUS_SET;
+ } else {
+ return tmrHw_INTERRUPT_STATUS_UNSET;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void /* void */
+) {
+ int i;
+
+ for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+ if (pTmrHw[i].InterruptStatus) {
+ return i;
+ }
+ }
+
+ return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+) {
+ (*fpPrint) ("Displaying register contents \n\n");
+ (*fpPrint) ("Timer %d: Load value 0x%X\n", timerId,
+ pTmrHw[timerId].LoadValue);
+ (*fpPrint) ("Timer %d: Background load value 0x%X\n", timerId,
+ pTmrHw[timerId].BackgroundLoad);
+ (*fpPrint) ("Timer %d: Control 0x%X\n", timerId,
+ pTmrHw[timerId].Control);
+ (*fpPrint) ("Timer %d: Interrupt clear 0x%X\n", timerId,
+ pTmrHw[timerId].InterruptClear);
+ (*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+ pTmrHw[timerId].RawInterruptStatus);
+ (*fpPrint) ("Timer %d: Interrupt status 0x%X\n", timerId,
+ pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) {
+ tmrHw_RATE_t usec_tick_rate;
+ tmrHw_COUNT_t start_time;
+ tmrHw_COUNT_t delta_time;
+
+ start_time = tmrHw_GetCurrentCount(timerId);
+ usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+ delta_time = usecs * usec_tick_rate;
+
+ /* Busy wait */
+ while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+ ;
+}
+
+/****************************************************************************/
+/**
+* @brief Local Divide function
+*
+* This function does the divide
+*
+* @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+ int r;
+ int t = 1;
+
+ /* Shift denom and t up to the largest value to optimize algorithm */
+ /* t contains the units of each divide */
+ while ((denom & 0x40000000) == 0) { /* fails if denom=0 */
+ denom = denom << 1;
+ t = t << 1;
+ }
+
+ /* Intialize the result */
+ r = 0;
+
+ do {
+ /* Determine if there exists a positive remainder */
+ if ((num - denom) >= 0) {
+ /* Accumlate t to the result and calculate a new remainder */
+ num = num - denom;
+ r = r + t;
+ }
+ /* Continue to shift denom and shift t down to 0 */
+ denom = denom >> 1;
+ t = t >> 1;
+ } while (t != 0);
+ return r;
+}
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 0000000..7b20fcc
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma.c
+*
+* @brief Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx) (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG 0
+
+#if DMA_MAP_DEBUG
+# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#else
+# define DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int len = 0;
+
+ len += sprintf(buf + len, "dma_map_mem statistics\n");
+ len +=
+ sprintf(buf + len, "coherent: %d\n",
+ atomic_read(&gDmaStatMemTypeCoherent));
+ len +=
+ sprintf(buf + len, "kmalloc: %d\n",
+ atomic_read(&gDmaStatMemTypeKmalloc));
+ len +=
+ sprintf(buf + len, "vmalloc: %d\n",
+ atomic_read(&gDmaStatMemTypeVmalloc));
+ len +=
+ sprintf(buf + len, "user: %d\n",
+ atomic_read(&gDmaStatMemTypeUser));
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int controllerIdx;
+ int channelIdx;
+ int limit = count - 200;
+ int len = 0;
+ DMA_Channel_t *channel;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ if (len >= limit) {
+ break;
+ }
+
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ len +=
+ sprintf(buf + len, "%d:%d ", controllerIdx,
+ channelIdx);
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+ 0) {
+ len +=
+ sprintf(buf + len, "Dedicated for %s ",
+ DMA_gDeviceAttribute[channel->
+ devType].name);
+ } else {
+ len += sprintf(buf + len, "Shared ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+ len += sprintf(buf + len, "No ISR ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+ len += sprintf(buf + len, "Fifo: 128 ");
+ } else {
+ len += sprintf(buf + len, "Fifo: 64 ");
+ }
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+ len +=
+ sprintf(buf + len, "InUse by %s",
+ DMA_gDeviceAttribute[channel->
+ devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ len +=
+ sprintf(buf + len, " (%s:%d)",
+ channel->fileName,
+ channel->lineNum);
+#endif
+ } else {
+ len += sprintf(buf + len, "Avail ");
+ }
+
+ if (channel->lastDevType != DMA_DEVICE_NONE) {
+ len +=
+ sprintf(buf + len, "Last use: %s ",
+ DMA_gDeviceAttribute[channel->
+ lastDevType].
+ name);
+ }
+
+ len += sprintf(buf + len, "\n");
+ }
+ }
+ up(&gDMA.lock);
+ *eof = 1;
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int limit = count - 200;
+ int len = 0;
+ int devIdx;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+ DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+ if (devAttr->name == NULL) {
+ continue;
+ }
+
+ if (len >= limit) {
+ break;
+ }
+
+ len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ len +=
+ sprintf(buf + len, "Dedicated %d:%d ",
+ devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ } else {
+ len += sprintf(buf + len, "Shared DMA:");
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+ len += sprintf(buf + len, "0");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+ len += sprintf(buf + len, "1");
+ }
+ len += sprintf(buf + len, " ");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+ len += sprintf(buf + len, "NoISR ");
+ }
+ if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+ len += sprintf(buf + len, "Allow-128 ");
+ }
+
+ len +=
+ sprintf(buf + len,
+ "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+ devAttr->numTransfers, devAttr->transferTicks,
+ devAttr->transferBytes,
+ devAttr->ring.bytesAllocated);
+
+ }
+
+ up(&gDMA.lock);
+ *eof = 1;
+
+ return len;
+}
+
+/****************************************************************************/
+/**
+* Determines if a DMA_Device_t is "valid".
+*
+* @return
+* TRUE - dma device is valid
+* FALSE - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+ return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+* Translates a DMA handle into a pointer to a channel.
+*
+* @return
+* non-NULL - pointer to DMA_Channel_t
+* NULL - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+ int controllerIdx;
+ int channelIdx;
+
+ controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+ channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+ if ((controllerIdx > DMA_NUM_CONTROLLERS)
+ || (channelIdx > DMA_NUM_CHANNELS)) {
+ return NULL;
+ }
+ return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+* Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int irqStatus;
+
+ channel = (DMA_Channel_t *) dev_id;
+
+ /* Figure out why we were called, and knock down the interrupt */
+
+ irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+ dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+ if ((channel->devType < 0)
+ || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+ printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+ channel->devType);
+ return IRQ_NONE;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ /* Update stats */
+
+ if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+ devAttr->transferTicks +=
+ (timer_get_tick_count() - devAttr->transferStartTime);
+ }
+
+ if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+ printk(KERN_ERR
+ "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+ channel->devType, devAttr->name);
+ } else {
+ devAttr->numTransfers++;
+ devAttr->transferBytes += devAttr->numBytes;
+ }
+
+ /* Call any installed handler */
+
+ if (devAttr->devHandler != NULL) {
+ devAttr->devHandler(channel->devType, irqStatus,
+ devAttr->userData);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+* Allocates memory to hold a descriptor ring. The descriptor ring then
+* needs to be populated by making one or more calls to
+* dna_add_descriptors.
+*
+* The returned descriptor ring will be automatically initialized.
+*
+* @return
+* 0 Descriptor ring was allocated successfully
+* -EINVAL Invalid parameters passed in
+* -ENOMEM Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */
+ int numDescriptors /* Number of descriptors that need to be allocated. */
+ ) {
+ size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+ if ((ring == NULL) || (numDescriptors <= 0)) {
+ return -EINVAL;
+ }
+
+ ring->physAddr = 0;
+ ring->descriptorsAllocated = 0;
+ ring->bytesAllocated = 0;
+
+ ring->virtAddr = dma_alloc_writecombine(NULL,
+ bytesToAlloc,
+ &ring->physAddr,
+ GFP_KERNEL);
+ if (ring->virtAddr == NULL) {
+ return -ENOMEM;
+ }
+
+ ring->bytesAllocated = bytesToAlloc;
+ ring->descriptorsAllocated = numDescriptors;
+
+ return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */
+ ) {
+ if (ring->virtAddr != NULL) {
+ dma_free_writecombine(NULL,
+ ring->bytesAllocated,
+ ring->virtAddr, ring->physAddr);
+ }
+
+ ring->bytesAllocated = 0;
+ ring->descriptorsAllocated = 0;
+ ring->virtAddr = NULL;
+ ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Initializes a descriptor ring, so that descriptors can be added to it.
+* Once a descriptor ring has been allocated, it may be reinitialized for
+* use with additional/different regions of memory.
+*
+* Note that if 7 descriptors are allocated, it's perfectly acceptable to
+* initialize the ring with a smaller number of descriptors. The amount
+* of memory allocated for the descriptor ring will not be reduced, and
+* the descriptor ring may be reinitialized later
+*
+* @return
+* 0 Descriptor ring was initialized successfully
+* -ENOMEM The descriptor which was passed in has insufficient space
+* to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */
+ int numDescriptors /* Number of descriptors to initialize. */
+ ) {
+ if (ring->virtAddr == NULL) {
+ return -EINVAL;
+ }
+ if (dmacHw_initDescriptor(ring->virtAddr,
+ ring->physAddr,
+ ring->bytesAllocated, numDescriptors) < 0) {
+ printk(KERN_ERR
+ "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Determines the number of descriptors which would be required for a
+* transfer of the indicated memory region.
+*
+* This function also needs to know which DMA device this transfer will
+* be destined for, so that the appropriate DMA configuration can be retrieved.
+* DMA parameters such as transfer width, and whether this is a memory-to-memory
+* or memory-to-peripheral, etc can all affect the actual number of descriptors
+* required.
+*
+* @return
+* > 0 Returns the number of descriptors required for the indicated transfer
+* -ENODEV - Device handed in is invalid.
+* -EINVAL Invalid parameters
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ int numDescriptors;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+ (void *)srcData,
+ (void *)dstData,
+ numBytes);
+ if (numDescriptors < 0) {
+ printk(KERN_ERR
+ "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+ return -EINVAL;
+ }
+
+ return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+* Adds a region of memory to the descriptor ring. Note that it may take
+* multiple descriptors for each region of memory. It is the callers
+* responsibility to allocate a sufficiently large descriptor ring.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+* -EINVAL Invalid parameters
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */
+ DMA_Device_t device, /* DMA Device that descriptors are for */
+ dma_addr_t srcData, /* Place to get data (memory or device) */
+ dma_addr_t dstData, /* Place to put data (memory or device) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ int rc;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ rc = dmacHw_setDataDescriptor(&devAttr->config,
+ ring->virtAddr,
+ (void *)srcData,
+ (void *)dstData, numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+ rc);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+* Sets the descriptor ring associated with a device.
+*
+* Once set, the descriptor ring will be associated with the device, even
+* across channel request/free calls. Passing in a NULL descriptor ring
+* will release any descriptor ring currently associated with the device.
+*
+* Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+* the descriptor ring may be released and reallocated.
+*
+* Note: This function will release the descriptor memory for any current
+* descriptor ring associated with this device.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ /* Free the previously allocated descriptor ring */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ if (ring != NULL) {
+ /* Copy in the new one */
+
+ devAttr->ring = *ring;
+ }
+
+ /* Set things up so that if dma_transfer is called then this descriptor */
+ /* ring will get freed. */
+
+ devAttr->prevSrcData = 0;
+ devAttr->prevDstData = 0;
+ devAttr->prevNumBytes = 0;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Retrieves the descriptor ring associated with a device.
+*
+* @return
+* 0 Descriptors were added successfully
+* -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Place to store retrieved ring */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ memset(ring, 0, sizeof(*ring));
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ *ring = devAttr->ring;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Configures a DMA channel.
+*
+* @return
+* >= 0 - Initialization was successfull.
+*
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int controllerIdx;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+ controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+ if (devAttr->config.transferType ==
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+ devAttr->config.dstPeripheralPort =
+ devAttr->dmacPort[controllerIdx];
+ } else if (devAttr->config.transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+ devAttr->config.srcPeripheralPort =
+ devAttr->dmacPort[controllerIdx];
+ }
+ }
+
+ if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+ printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* Intializes all of the data structures associated with the DMA.
+* @return
+* >= 0 - Initialization was successfull.
+*
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+ int rc = 0;
+ int controllerIdx;
+ int channelIdx;
+ DMA_Device_t devIdx;
+ DMA_Channel_t *channel;
+ DMA_Handle_t dedicatedHandle;
+
+ memset(&gDMA, 0, sizeof(gDMA));
+
+ init_MUTEX_LOCKED(&gDMA.lock);
+ init_waitqueue_head(&gDMA.freeChannelQ);
+
+ /* Initialize the Hardware */
+
+ dmacHw_initDma();
+
+ /* Start off by marking all of the DMA channels as shared. */
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ channel->flags = 0;
+ channel->devType = DMA_DEVICE_NONE;
+ channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = "";
+ channel->lineNum = 0;
+#endif
+
+ channel->dmacHwHandle =
+ dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+ (controllerIdx,
+ channelIdx));
+ dmacHw_initChannel(channel->dmacHwHandle);
+ }
+ }
+
+ /* Record any special attributes that channels may have */
+
+ gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+ gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+ /* Now walk through and record the dedicated channels. */
+
+ for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+ DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+ if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+ && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+ printk(KERN_ERR
+ "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+ devAttr->name);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ /* This is a dedicated device. Mark the channel as being reserved. */
+
+ if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+ printk(KERN_ERR
+ "DMA Device: %s DMA Controller %d is out of range\n",
+ devAttr->name,
+ devAttr->dedicatedController);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+ printk(KERN_ERR
+ "DMA Device: %s DMA Channel %d is out of range\n",
+ devAttr->name,
+ devAttr->dedicatedChannel);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dedicatedHandle =
+ MAKE_HANDLE(devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ channel = HandleToChannel(dedicatedHandle);
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+ 0) {
+ printk
+ ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+ devAttr->name,
+ devAttr->dedicatedController,
+ devAttr->dedicatedChannel,
+ DMA_gDeviceAttribute[channel->devType].
+ name);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+ channel->devType = devIdx;
+
+ if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+ channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+ }
+
+ /* For dedicated channels, we can go ahead and configure the DMA channel now */
+ /* as well. */
+
+ ConfigChannel(dedicatedHandle);
+ }
+ }
+
+ /* Go through and register the interrupt handlers */
+
+ for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+ controllerIdx++) {
+ for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].channel[channelIdx];
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+ snprintf(channel->name, sizeof(channel->name),
+ "dma %d:%d %s", controllerIdx,
+ channelIdx,
+ channel->devType ==
+ DMA_DEVICE_NONE ? "" :
+ DMA_gDeviceAttribute[channel->devType].
+ name);
+
+ rc =
+ request_irq(IRQ_DMA0C0 +
+ (controllerIdx *
+ DMA_NUM_CHANNELS) +
+ channelIdx,
+ dma_interrupt_handler,
+ IRQF_DISABLED, channel->name,
+ channel);
+ if (rc != 0) {
+ printk(KERN_ERR
+ "request_irq for IRQ_DMA%dC%d failed\n",
+ controllerIdx, channelIdx);
+ }
+ }
+ }
+ }
+
+ /* Create /proc/dma/channels and /proc/dma/devices */
+
+ gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+ if (gDmaDir == NULL) {
+ printk(KERN_ERR "Unable to create /proc/dma\n");
+ } else {
+ create_proc_read_entry("channels", 0, gDmaDir,
+ dma_proc_read_channels, NULL);
+ create_proc_read_entry("devices", 0, gDmaDir,
+ dma_proc_read_devices, NULL);
+ create_proc_read_entry("mem-type", 0, gDmaDir,
+ dma_proc_read_mem_type, NULL);
+ }
+
+out:
+
+ up(&gDMA.lock);
+
+ return rc;
+}
+
+/****************************************************************************/
+/**
+* Reserves a channel for use with @a dev. If the device is setup to use
+* a shared channel, then this function will block until a free channel
+* becomes available.
+*
+* @return
+* >= 0 - A valid DMA Handle.
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+ (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+ DMA_Handle_t handle;
+ DMA_DeviceAttribute_t *devAttr;
+ DMA_Channel_t *channel;
+ int controllerIdx;
+ int controllerIdx2;
+ int channelIdx;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+ handle = -ENODEV;
+ goto out;
+ }
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ {
+ char *s;
+
+ s = strrchr(fileName, '/');
+ if (s != NULL) {
+ fileName = s + 1;
+ }
+ }
+#endif
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+ /* This device has already been requested and not been freed */
+
+ printk(KERN_ERR "%s: device %s is already requested\n",
+ __func__, devAttr->name);
+ handle = -EBUSY;
+ goto out;
+ }
+
+ if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+ /* This device has a dedicated channel. */
+
+ channel =
+ &gDMA.controller[devAttr->dedicatedController].
+ channel[devAttr->dedicatedChannel];
+ if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+ handle = -EBUSY;
+ goto out;
+ }
+
+ channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+ devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = fileName;
+ channel->lineNum = lineNum;
+#endif
+ handle =
+ MAKE_HANDLE(devAttr->dedicatedController,
+ devAttr->dedicatedChannel);
+ goto out;
+ }
+
+ /* This device needs to use one of the shared channels. */
+
+ handle = DMA_INVALID_HANDLE;
+ while (handle == DMA_INVALID_HANDLE) {
+ /* Scan through the shared channels and see if one is available */
+
+ for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+ controllerIdx2++) {
+ /* Check to see if we should try on controller 1 first. */
+
+ controllerIdx = controllerIdx2;
+ if ((devAttr->
+ flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+ controllerIdx = 1 - controllerIdx;
+ }
+
+ /* See if the device is available on the controller being tested */
+
+ if ((devAttr->
+ flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+ != 0) {
+ for (channelIdx = 0;
+ channelIdx < DMA_NUM_CHANNELS;
+ channelIdx++) {
+ channel =
+ &gDMA.controller[controllerIdx].
+ channel[channelIdx];
+
+ if (((channel->
+ flags &
+ DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+ 0)
+ &&
+ ((channel->
+ flags & DMA_CHANNEL_FLAG_IN_USE)
+ == 0)) {
+ if (((channel->
+ flags &
+ DMA_CHANNEL_FLAG_LARGE_FIFO)
+ != 0)
+ &&
+ ((devAttr->
+ flags &
+ DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+ == 0)) {
+ /* This channel is a large fifo - don't tie it up */
+ /* with devices that we don't want using it. */
+
+ continue;
+ }
+
+ channel->flags |=
+ DMA_CHANNEL_FLAG_IN_USE;
+ channel->devType = dev;
+ devAttr->flags |=
+ DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ channel->fileName = fileName;
+ channel->lineNum = lineNum;
+#endif
+ handle =
+ MAKE_HANDLE(controllerIdx,
+ channelIdx);
+
+ /* Now that we've reserved the channel - we can go ahead and configure it */
+
+ if (ConfigChannel(handle) != 0) {
+ handle = -EIO;
+ printk(KERN_ERR
+ "dma_request_channel: ConfigChannel failed\n");
+ }
+ goto out;
+ }
+ }
+ }
+ }
+
+ /* No channels are currently available. Let's wait for one to free up. */
+
+ {
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(&gDMA.freeChannelQ, &wait,
+ TASK_INTERRUPTIBLE);
+ up(&gDMA.lock);
+ schedule();
+ finish_wait(&gDMA.freeChannelQ, &wait);
+
+ if (signal_pending(current)) {
+ /* We don't currently hold gDMA.lock, so we return directly */
+
+ return -ERESTARTSYS;
+ }
+ }
+
+ if (down_interruptible(&gDMA.lock)) {
+ return -ERESTARTSYS;
+ }
+ }
+
+out:
+ up(&gDMA.lock);
+
+ return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+ return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+* Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle /* DMA handle. */
+ ) {
+ int rc = 0;
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (down_interruptible(&gDMA.lock) < 0) {
+ return -ERESTARTSYS;
+ }
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+ channel->lastDevType = channel->devType;
+ channel->devType = DMA_DEVICE_NONE;
+ }
+ channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+ devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+ up(&gDMA.lock);
+
+ wake_up_interruptible(&gDMA.freeChannelQ);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+* Determines if a given device has been configured as using a shared
+* channel.
+*
+* @return
+* 0 Device uses a dedicated channel
+* > zero Device uses a shared channel
+* < zero Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device /* Device to check. */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+
+ if (!IsDeviceValid(device)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[device];
+
+ return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+* Allocates buffers for the descriptors. This is normally done automatically
+* but needs to be done explicitly when initiating a dma from interrupt
+* context.
+*
+* @return
+* 0 Descriptors were allocated successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int numDescriptors;
+ size_t ringBytesRequired;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if (devAttr->config.transferType != transferType) {
+ return -EINVAL;
+ }
+
+ /* Figure out how many descriptors we need. */
+
+ /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+ /* srcData, dstData, numBytes); */
+
+ numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+ (void *)srcData,
+ (void *)dstData,
+ numBytes);
+ if (numDescriptors < 0) {
+ printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+ /* a new one. */
+
+ ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+ /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+ if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+ /* Make sure that this code path is never taken from interrupt context. */
+ /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+ /* allocation needs to have already been done. */
+
+ might_sleep();
+
+ /* Free the old descriptor ring and allocate a new one. */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ /* And allocate a new one. */
+
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring(%d) failed\n",
+ __func__, numDescriptors);
+ return rc;
+ }
+ /* Setup the descriptor for this transfer */
+
+ if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+ devAttr->ring.physAddr,
+ devAttr->ring.bytesAllocated,
+ numDescriptors) < 0) {
+ printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ } else {
+ /* We've already got enough ring buffer allocated. All we need to do is reset */
+ /* any control information, just in case the previous DMA was stopped. */
+
+ dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+ }
+
+ /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+ /* as last time, then we don't need to call setDataDescriptor again. */
+
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Remember the critical information for this transfer so that we can eliminate */
+ /* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+ devAttr->prevSrcData = srcData;
+ devAttr->prevDstData = dstData;
+ devAttr->prevNumBytes = numBytes;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+* Allocates and sets up descriptors for a double buffered circular buffer.
+*
+* This is primarily intended to be used for things like the ingress samples
+* from a microphone.
+*
+* @return
+* > 0 Number of descriptors actually allocated.
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Physical address of source data */
+ dma_addr_t dstData1, /* Physical address of first destination buffer */
+ dma_addr_t dstData2, /* Physical address of second destination buffer */
+ size_t numBytes /* Number of bytes in each destination buffer */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int numDst1Descriptors;
+ int numDst2Descriptors;
+ int numDescriptors;
+ size_t ringBytesRequired;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ /* Figure out how many descriptors we need. */
+
+ /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+ /* srcData, dstData, numBytes); */
+
+ numDst1Descriptors =
+ dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+ (void *)dstData1, numBytes);
+ if (numDst1Descriptors < 0) {
+ return -EINVAL;
+ }
+ numDst2Descriptors =
+ dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+ (void *)dstData2, numBytes);
+ if (numDst2Descriptors < 0) {
+ return -EINVAL;
+ }
+ numDescriptors = numDst1Descriptors + numDst2Descriptors;
+ /* printk("numDescriptors: %d\n", numDescriptors); */
+
+ /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+ /* a new one. */
+
+ ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+ /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+ if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+ /* Make sure that this code path is never taken from interrupt context. */
+ /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+ /* allocation needs to have already been done. */
+
+ might_sleep();
+
+ /* Free the old descriptor ring and allocate a new one. */
+
+ dma_free_descriptor_ring(&devAttr->ring);
+
+ /* And allocate a new one. */
+
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring(%d) failed\n",
+ __func__, ringBytesRequired);
+ return rc;
+ }
+ }
+
+ /* Setup the descriptor for this transfer. Since this function is used with */
+ /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+ /* setDataDescriptor will keep trying to append onto the end. */
+
+ if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+ devAttr->ring.physAddr,
+ devAttr->ring.bytesAllocated,
+ numDescriptors) < 0) {
+ printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+ return -EINVAL;
+ }
+
+ /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+ /* as last time, then we don't need to call setDataDescriptor again. */
+
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData1, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+ __func__);
+ return -EINVAL;
+ }
+ if (dmacHw_setDataDescriptor(&devAttr->config,
+ devAttr->ring.virtAddr,
+ (void *)srcData,
+ (void *)dstData2, numBytes) < 0) {
+ printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+ /* try to make the 'prev' variables right. */
+
+ devAttr->prevSrcData = 0;
+ devAttr->prevDstData = 0;
+ devAttr->prevNumBytes = 0;
+
+ return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+* Initiates a transfer when the descriptors have already been setup.
+*
+* This is a special case, and normally, the dma_transfer_xxx functions should
+* be used.
+*
+* @return
+* 0 Transfer was started successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+ devAttr->ring.virtAddr);
+
+ /* Since we got this far, everything went successfully */
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+* Stops a previously started DMA transfer.
+*
+* @return
+* 0 Transfer was stopped successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ dmacHw_stopTransfer(channel->dmacHwHandle);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+* Waits for a DMA to complete by polling. This function is only intended
+* to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+ DMA_Channel_t *channel;
+ dmacHw_TRANSFER_STATUS_e status;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ while ((status =
+ dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+ dmacHw_TRANSFER_STATUS_BUSY) {
+ ;
+ }
+
+ if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+ printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+ return -EIO;
+ }
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+* Initiates a DMA, allocating the descriptors as required.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ DMA_Channel_t *channel;
+ DMA_DeviceAttribute_t *devAttr;
+ int rc = 0;
+
+ channel = HandleToChannel(handle);
+ if (channel == NULL) {
+ return -ENODEV;
+ }
+
+ devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+ if (devAttr->config.transferType != transferType) {
+ return -EINVAL;
+ }
+
+ /* We keep track of the information about the previous request for this */
+ /* device, and if the attributes match, then we can use the descriptors we setup */
+ /* the last time, and not have to reinitialize everything. */
+
+ {
+ rc =
+ dma_alloc_descriptors(handle, transferType, srcData,
+ dstData, numBytes);
+ if (rc != 0) {
+ return rc;
+ }
+ }
+
+ /* And kick off the transfer */
+
+ devAttr->numBytes = numBytes;
+ devAttr->transferStartTime = timer_get_tick_count();
+
+ dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+ devAttr->ring.virtAddr);
+
+ /* Since we got this far, everything went successfully */
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+* Set the callback function which will be called when a transfer completes.
+* If a NULL callback function is set, then no callback will occur.
+*
+* @note @a devHandler will be called from IRQ context.
+*
+* @return
+* 0 - Success
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */
+ DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */
+ void *userData /* Pointer which will be passed to devHandler. */
+ ) {
+ DMA_DeviceAttribute_t *devAttr;
+ unsigned long flags;
+
+ if (!IsDeviceValid(dev)) {
+ return -ENODEV;
+ }
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+ local_irq_save(flags);
+
+ devAttr->userData = userData;
+ devAttr->devHandler = devHandler;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+* Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+ memset(memMap, 0, sizeof(*memMap));
+
+ init_MUTEX(&memMap->lock);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+* Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+ down(&memMap->lock); /* Just being paranoid */
+
+ /* Free up any allocated memory */
+
+ up(&memMap->lock);
+ memset(memMap, 0, sizeof(*memMap));
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+* Looks at a memory address and categorizes it.
+*
+* @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+ unsigned long addrVal = (unsigned long)addr;
+
+ if (addrVal >= VMALLOC_END) {
+ /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+ /* dma_alloc_xxx pages are physically and virtually contiguous */
+
+ return DMA_MEM_TYPE_DMA;
+ }
+
+ /* Technically, we could add one more classification. Addresses between VMALLOC_END */
+ /* and the beginning of the DMA virtual address could be considered to be I/O space. */
+ /* Right now, nobody cares about this particular classification, so we ignore it. */
+
+ if (is_vmalloc_addr(addr)) {
+ /* Address comes from the vmalloc'd region. Pages are virtually */
+ /* contiguous but NOT physically contiguous */
+
+ return DMA_MEM_TYPE_VMALLOC;
+ }
+
+ if (addrVal >= PAGE_OFFSET) {
+ /* PAGE_OFFSET is typically 0xC0000000 */
+
+ /* kmalloc'd pages are physically contiguous */
+
+ return DMA_MEM_TYPE_KMALLOC;
+ }
+
+ return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+* Looks at a memory address and determines if we support DMA'ing to/from
+* that type of memory.
+*
+* @return boolean -
+* return value != 0 means dma supported
+* return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+ DMA_MemType_t memType = dma_mem_type(addr);
+
+ return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+ || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ ) {
+ int rc;
+
+ down(&memMap->lock);
+
+ DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+ if (memMap->inUse) {
+ printk(KERN_ERR "%s: memory map %p is already being used\n",
+ __func__, memMap);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ memMap->inUse = 1;
+ memMap->dir = dir;
+ memMap->numRegionsUsed = 0;
+
+ rc = 0;
+
+out:
+
+ DMA_MAP_PRINT("returning %d", rc);
+
+ up(&memMap->lock);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+* Adds a segment of memory to a memory map. Each segment is both
+* physically and virtually contiguous.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ DMA_Region_t *region, /* Region that the segment belongs to */
+ void *virtAddr, /* Virtual address of the segment being added */
+ dma_addr_t physAddr, /* Physical address of the segment being added */
+ size_t numBytes /* Number of bytes of the segment being added */
+ ) {
+ DMA_Segment_t *segment;
+
+ DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+ physAddr, numBytes);
+
+ /* Sanity check */
+
+ if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+ || (((unsigned long)virtAddr + numBytes)) >
+ ((unsigned long)region->virtAddr + region->numBytes)) {
+ printk(KERN_ERR
+ "%s: virtAddr %p is outside region @ %p len: %d\n",
+ __func__, virtAddr, region->virtAddr, region->numBytes);
+ return -EINVAL;
+ }
+
+ if (region->numSegmentsUsed > 0) {
+ /* Check to see if this segment is physically contiguous with the previous one */
+
+ segment = ®ion->segment[region->numSegmentsUsed - 1];
+
+ if ((segment->physAddr + segment->numBytes) == physAddr) {
+ /* It is - just add on to the end */
+
+ DMA_MAP_PRINT("appending %d bytes to last segment\n",
+ numBytes);
+
+ segment->numBytes += numBytes;
+
+ return 0;
+ }
+ }
+
+ /* Reallocate to hold more segments, if required. */
+
+ if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+ DMA_Segment_t *newSegment;
+ size_t oldSize =
+ region->numSegmentsAllocated * sizeof(*newSegment);
+ int newAlloc = region->numSegmentsAllocated + 4;
+ size_t newSize = newAlloc * sizeof(*newSegment);
+
+ newSegment = kmalloc(newSize, GFP_KERNEL);
+ if (newSegment == NULL) {
+ return -ENOMEM;
+ }
+ memcpy(newSegment, region->segment, oldSize);
+ memset(&((uint8_t *) newSegment)[oldSize], 0,
+ newSize - oldSize);
+ kfree(region->segment);
+
+ region->numSegmentsAllocated = newAlloc;
+ region->segment = newSegment;
+ }
+
+ segment = ®ion->segment[region->numSegmentsUsed];
+ region->numSegmentsUsed++;
+
+ segment->virtAddr = virtAddr;
+ segment->physAddr = physAddr;
+ segment->numBytes = numBytes;
+
+ DMA_MAP_PRINT("returning success\n");
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* Adds a region of memory to a memory map. Each region is virtually
+* contiguous, but not necessarily physically contiguous.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes /* Number of bytes being mapped */
+ ) {
+ unsigned long addr = (unsigned long)mem;
+ unsigned int offset;
+ int rc = 0;
+ DMA_Region_t *region;
+ dma_addr_t physAddr;
+
+ down(&memMap->lock);
+
+ DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+ if (!memMap->inUse) {
+ printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+ __func__);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Reallocate to hold more regions. */
+
+ if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+ DMA_Region_t *newRegion;
+ size_t oldSize =
+ memMap->numRegionsAllocated * sizeof(*newRegion);
+ int newAlloc = memMap->numRegionsAllocated + 4;
+ size_t newSize = newAlloc * sizeof(*newRegion);
+
+ newRegion = kmalloc(newSize, GFP_KERNEL);
+ if (newRegion == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memcpy(newRegion, memMap->region, oldSize);
+ memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+ kfree(memMap->region);
+
+ memMap->numRegionsAllocated = newAlloc;
+ memMap->region = newRegion;
+ }
+
+ region = &memMap->region[memMap->numRegionsUsed];
+ memMap->numRegionsUsed++;
+
+ offset = addr & ~PAGE_MASK;
+
+ region->memType = dma_mem_type(mem);
+ region->virtAddr = mem;
+ region->numBytes = numBytes;
+ region->numSegmentsUsed = 0;
+ region->numLockedPages = 0;
+ region->lockedPages = NULL;
+
+ switch (region->memType) {
+ case DMA_MEM_TYPE_VMALLOC:
+ {
+ atomic_inc(&gDmaStatMemTypeVmalloc);
+
+ /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+ /* vmalloc'd pages are not physically contiguous */
+
+ rc = -EINVAL;
+ break;
+ }
+
+ case DMA_MEM_TYPE_KMALLOC:
+ {
+ atomic_inc(&gDmaStatMemTypeKmalloc);
+
+ /* kmalloc'd pages are physically contiguous, so they'll have exactly */
+ /* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ physAddr =
+ dma_map_single(NULL, mem, numBytes, memMap->dir);
+ rc = dma_map_add_segment(memMap, region, mem, physAddr,
+ numBytes);
+#else
+ rc = -EINVAL;
+#endif
+ break;
+ }
+
+ case DMA_MEM_TYPE_DMA:
+ {
+ /* dma_alloc_xxx pages are physically contiguous */
+
+ atomic_inc(&gDmaStatMemTypeCoherent);
+
+ physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+ dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+ memMap->dir);
+ rc = dma_map_add_segment(memMap, region, mem, physAddr,
+ numBytes);
+ break;
+ }
+
+ case DMA_MEM_TYPE_USER:
+ {
+ size_t firstPageOffset;
+ size_t firstPageSize;
+ struct page **pages;
+ struct task_struct *userTask;
+
+ atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+ /* If the pages are user pages, then the dma_mem_map_set_user_task function */
+ /* must have been previously called. */
+
+ if (memMap->userTask == NULL) {
+ printk(KERN_ERR
+ "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* User pages need to be locked. */
+
+ firstPageOffset =
+ (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+ firstPageSize = PAGE_SIZE - firstPageOffset;
+
+ region->numLockedPages = (firstPageOffset
+ + region->numBytes +
+ PAGE_SIZE - 1) / PAGE_SIZE;
+ pages =
+ kmalloc(region->numLockedPages *
+ sizeof(struct page *), GFP_KERNEL);
+
+ if (pages == NULL) {
+ region->numLockedPages = 0;
+ return -ENOMEM;
+ }
+
+ userTask = memMap->userTask;
+
+ down_read(&userTask->mm->mmap_sem);
+ rc = get_user_pages(userTask, /* task */
+ userTask->mm, /* mm */
+ (unsigned long)region->virtAddr, /* start */
+ region->numLockedPages, /* len */
+ memMap->dir == DMA_FROM_DEVICE, /* write */
+ 0, /* force */
+ pages, /* pages (array of pointers to page) */
+ NULL); /* vmas */
+ up_read(&userTask->mm->mmap_sem);
+
+ if (rc != region->numLockedPages) {
+ kfree(pages);
+ region->numLockedPages = 0;
+
+ if (rc >= 0) {
+ rc = -EINVAL;
+ }
+ } else {
+ uint8_t *virtAddr = region->virtAddr;
+ size_t bytesRemaining;
+ int pageIdx;
+
+ rc = 0; /* Since get_user_pages returns +ve number */
+
+ region->lockedPages = pages;
+
+ /* We've locked the user pages. Now we need to walk them and figure */
+ /* out the physical addresses. */
+
+ /* The first page may be partial */
+
+ dma_map_add_segment(memMap,
+ region,
+ virtAddr,
+ PFN_PHYS(page_to_pfn
+ (pages[0])) +
+ firstPageOffset,
+ firstPageSize);
+
+ virtAddr += firstPageSize;
+ bytesRemaining =
+ region->numBytes - firstPageSize;
+
+ for (pageIdx = 1;
+ pageIdx < region->numLockedPages;
+ pageIdx++) {
+ size_t bytesThisPage =
+ (bytesRemaining >
+ PAGE_SIZE ? PAGE_SIZE :
+ bytesRemaining);
+
+ DMA_MAP_PRINT
+ ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+ pageIdx, pages[pageIdx],
+ page_to_pfn(pages[pageIdx]),
+ PFN_PHYS(page_to_pfn
+ (pages[pageIdx])));
+
+ dma_map_add_segment(memMap,
+ region,
+ virtAddr,
+ PFN_PHYS(page_to_pfn
+ (pages
+ [pageIdx])),
+ bytesThisPage);
+
+ virtAddr += bytesThisPage;
+ bytesRemaining -= bytesThisPage;
+ }
+ }
+#else
+ printk(KERN_ERR
+ "%s: User mode pages are not yet supported\n",
+ __func__);
+
+ /* user pages are not physically contiguous */
+
+ rc = -EINVAL;
+#endif
+ break;
+ }
+
+ default:
+ {
+ printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+ __func__, region->memType);
+
+ rc = -EINVAL;
+ break;
+ }
+ }
+
+ if (rc != 0) {
+ memMap->numRegionsUsed--;
+ }
+
+out:
+
+ DMA_MAP_PRINT("returning %d\n", rc);
+
+ up(&memMap->lock);
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes, /* Number of bytes being mapped */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ ) {
+ int rc;
+
+ rc = dma_map_start(memMap, dir);
+ if (rc == 0) {
+ rc = dma_map_add_region(memMap, mem, numBytes);
+ if (rc < 0) {
+ /* Since the add fails, this function will fail, and the caller won't */
+ /* call unmap, so we need to do it here. */
+
+ dma_unmap(memMap, 0);
+ }
+ }
+
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+* Setup a descriptor ring for a given memory map.
+*
+* It is assumed that the descriptor ring has already been initialized, and
+* this routine will only reallocate a new descriptor ring if the existing
+* one is too small.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
+ DMA_MemMap_t *memMap, /* Memory map that will be used */
+ dma_addr_t devPhysAddr /* Physical address of device */
+ ) {
+ int rc;
+ int numDescriptors;
+ DMA_DeviceAttribute_t *devAttr;
+ DMA_Region_t *region;
+ DMA_Segment_t *segment;
+ dma_addr_t srcPhysAddr;
+ dma_addr_t dstPhysAddr;
+ int regionIdx;
+ int segmentIdx;
+
+ devAttr = &DMA_gDeviceAttribute[dev];
+
+ down(&memMap->lock);
+
+ /* Figure out how many descriptors we need */
+
+ numDescriptors = 0;
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = ®ion->segment[segmentIdx];
+
+ if (memMap->dir == DMA_TO_DEVICE) {
+ srcPhysAddr = segment->physAddr;
+ dstPhysAddr = devPhysAddr;
+ } else {
+ srcPhysAddr = devPhysAddr;
+ dstPhysAddr = segment->physAddr;
+ }
+
+ rc =
+ dma_calculate_descriptor_count(dev, srcPhysAddr,
+ dstPhysAddr,
+ segment->
+ numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_calculate_descriptor_count failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ numDescriptors += rc;
+ }
+ }
+
+ /* Adjust the size of the ring, if it isn't big enough */
+
+ if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+ dma_free_descriptor_ring(&devAttr->ring);
+ rc =
+ dma_alloc_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_alloc_descriptor_ring failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ } else {
+ rc =
+ dma_init_descriptor_ring(&devAttr->ring,
+ numDescriptors);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_init_descriptor_ring failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+
+ /* Populate the descriptors */
+
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = ®ion->segment[segmentIdx];
+
+ if (memMap->dir == DMA_TO_DEVICE) {
+ srcPhysAddr = segment->physAddr;
+ dstPhysAddr = devPhysAddr;
+ } else {
+ srcPhysAddr = devPhysAddr;
+ dstPhysAddr = segment->physAddr;
+ }
+
+ rc =
+ dma_add_descriptors(&devAttr->ring, dev,
+ srcPhysAddr, dstPhysAddr,
+ segment->numBytes);
+ if (rc < 0) {
+ printk(KERN_ERR
+ "%s: dma_add_descriptors failed: %d\n",
+ __func__, rc);
+ goto out;
+ }
+ }
+ }
+
+ rc = 0;
+
+out:
+
+ up(&memMap->lock);
+ return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ int dirtied /* non-zero if any of the pages were modified */
+ ) {
+ int regionIdx;
+ int segmentIdx;
+ DMA_Region_t *region;
+ DMA_Segment_t *segment;
+
+ for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+ region = &memMap->region[regionIdx];
+
+ for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+ segmentIdx++) {
+ segment = ®ion->segment[segmentIdx];
+
+ switch (region->memType) {
+ case DMA_MEM_TYPE_VMALLOC:
+ {
+ printk(KERN_ERR
+ "%s: vmalloc'd pages are not yet supported\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ case DMA_MEM_TYPE_KMALLOC:
+ {
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+ dma_unmap_single(NULL,
+ segment->physAddr,
+ segment->numBytes,
+ memMap->dir);
+#endif
+ break;
+ }
+
+ case DMA_MEM_TYPE_DMA:
+ {
+ dma_sync_single_for_cpu(NULL,
+ segment->
+ physAddr,
+ segment->
+ numBytes,
+ memMap->dir);
+ break;
+ }
+
+ case DMA_MEM_TYPE_USER:
+ {
+ /* Nothing to do here. */
+
+ break;
+ }
+
+ default:
+ {
+ printk(KERN_ERR
+ "%s: Unsupported memory type: %d\n",
+ __func__, region->memType);
+ return -EINVAL;
+ }
+ }
+
+ segment->virtAddr = NULL;
+ segment->physAddr = 0;
+ segment->numBytes = 0;
+ }
+
+ if (region->numLockedPages > 0) {
+ int pageIdx;
+
+ /* Some user pages were locked. We need to go and unlock them now. */
+
+ for (pageIdx = 0; pageIdx < region->numLockedPages;
+ pageIdx++) {
+ struct page *page =
+ region->lockedPages[pageIdx];
+
+ if (memMap->dir == DMA_FROM_DEVICE) {
+ SetPageDirty(page);
+ }
+ page_cache_release(page);
+ }
+ kfree(region->lockedPages);
+ region->numLockedPages = 0;
+ region->lockedPages = NULL;
+ }
+
+ region->memType = DMA_MEM_TYPE_NONE;
+ region->virtAddr = NULL;
+ region->numBytes = 0;
+ region->numSegmentsUsed = 0;
+ }
+ memMap->userTask = NULL;
+ memMap->numRegionsUsed = 0;
+ memMap->inUse = 0;
+
+ up(&memMap->lock);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 0000000..ca0ad73
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma_device.c
+*
+* @brief private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+ [DMA_DEVICE_MEM_TO_MEM] = /* MEM 2 MEM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "mem-to-mem",
+ .config = {
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+ },
+ },
+ [DMA_DEVICE_VPM_MEM_TO_MEM] = /* VPM */
+ {
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+ .name = "vpm",
+ .dedicatedController = 0,
+ .dedicatedChannel = 0,
+ /* reserve DMA0:0 for VPM */
+ },
+ [DMA_DEVICE_NAND_MEM_TO_MEM] = /* NAND */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "nand",
+ .config = {
+ .srcPeripheralPort = 0,
+ .dstPeripheralPort = 0,
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+ },
+ },
+ [DMA_DEVICE_PIF_MEM_TO_DEV] = /* PIF TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+ | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+ | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+ .name = "pif_tx",
+ .dmacPort = {14, 5},
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ /* dstPeripheralPort = 5 or 14 */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .maxDataPerBlock = 16256,
+ },
+ },
+ [DMA_DEVICE_PIF_DEV_TO_MEM] = /* PIF RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+ | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+ /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+ | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+ .name = "pif_rx",
+ .dmacPort = {14, 5},
+ .config = {
+ /* srcPeripheralPort = 5 or 14 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .maxDataPerBlock = 16256,
+ },
+ },
+ [DMA_DEVICE_I2S0_DEV_TO_MEM] = /* I2S RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "i2s0_rx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: I2S0 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_I2S0_MEM_TO_DEV] = /* I2S TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "i2s0_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 1, /* DST: I2S0 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_I2S1_DEV_TO_MEM] = /* I2S1 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "i2s1_rx",
+ .config = {
+ .srcPeripheralPort = 2, /* SRC: I2S1 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_I2S1_MEM_TO_DEV] = /* I2S1 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "i2s1_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 3, /* DST: I2S1 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_ESW_MEM_TO_DEV] = /* ESW TX */
+ {
+ .name = "esw_tx",
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+ .dedicatedController = 1,
+ .dedicatedChannel = 3,
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 1, /* DST: ESW (MTP) */
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+ /* DMAx_AHB_SSTATARy */
+ .srcStatusRegisterAddress = 0x00000000,
+ /* DMAx_AHB_DSTATARy */
+ .dstStatusRegisterAddress = 0x30490010,
+ /* DMAx_AHB_CFGy */
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ /* DMAx_AHB_CTLy */
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ },
+ },
+ [DMA_DEVICE_ESW_DEV_TO_MEM] = /* ESW RX */
+ {
+ .name = "esw_rx",
+ .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+ .dedicatedController = 1,
+ .dedicatedChannel = 2,
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: ESW (PTM) */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+ /* DMAx_AHB_SSTATARy */
+ .srcStatusRegisterAddress = 0x30480010,
+ /* DMAx_AHB_DSTATARy */
+ .dstStatusRegisterAddress = 0x00000000,
+ /* DMAx_AHB_CFGy */
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ /* DMAx_AHB_CTLy */
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] = /* APM Codec A Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_a_rx",
+ .config = {
+ .srcPeripheralPort = 2, /* SRC: Codec A Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] = /* APM Codec A Egress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_a_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 3, /* DST: Codec A Egress FIFO */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] = /* APM Codec B Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_b_rx",
+ .config = {
+ .srcPeripheralPort = 4, /* SRC: Codec B Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] = /* APM Codec B Egress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "apm_b_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 5, /* DST: Codec B Egress FIFO */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] = /* APM Codec C Ingress */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "apm_c_rx",
+ .config = {
+ .srcPeripheralPort = 4, /* SRC: Codec C Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM0_DEV_TO_MEM] = /* PCM0 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "pcm0_rx",
+ .config = {
+ .srcPeripheralPort = 12, /* SRC: PCM0 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM0_MEM_TO_DEV] = /* PCM0 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0,
+ .name = "pcm0_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 13, /* DST: PCM0 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_APM_PCM1_DEV_TO_MEM] = /* PCM1 RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "pcm1_rx",
+ .config = {
+ .srcPeripheralPort = 14, /* SRC: PCM1 */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+ },
+ },
+ [DMA_DEVICE_APM_PCM1_MEM_TO_DEV] = /* PCM1 TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "pcm1_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 15, /* DST: PCM1 */
+ .srcStatusRegisterAddress = 0,
+ .dstStatusRegisterAddress = 0,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_SPUM_DEV_TO_MEM] = /* SPUM RX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "spum_rx",
+ .config = {
+ .srcPeripheralPort = 6, /* SRC: Codec A Ingress FIFO */
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ /* Busrt size **MUST** be 16 for SPUM to work */
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ /* on the RX side, SPU needs to be the flow controller */
+ .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+ },
+ },
+ [DMA_DEVICE_SPUM_MEM_TO_DEV] = /* SPUM TX */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "spum_tx",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .dstPeripheralPort = 7, /* DST: SPUM */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+ /* Busrt size **MUST** be 16 for SPUM to work */
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+ .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+ },
+ },
+ [DMA_DEVICE_MEM_TO_VRAM] = /* MEM 2 VRAM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "mem-to-vram",
+ .config = {
+ .srcPeripheralPort = 0, /* SRC: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ },
+ },
+ [DMA_DEVICE_VRAM_TO_MEM] = /* VRAM 2 MEM */
+ {
+ .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+ .name = "vram-to-mem",
+ .config = {
+ .dstPeripheralPort = 0, /* DST: memory */
+ .srcStatusRegisterAddress = 0x00000000,
+ .dstStatusRegisterAddress = 0x00000000,
+ .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+ .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+ .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+ .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+ .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+ .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+ .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+ .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+ .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+ .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+ },
+ },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute); /* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 0000000..f01da87
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV 0xB0
+#define CFG_GLOBAL_RAM_SIZE 0x10000000
+#define CFG_GLOBAL_RAM_BASE 0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 0000000..b5beb0b3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107 10
+#define BCM11109 11
+#define BCM11170 12
+#define BCM11110 13
+#define BCM11211 14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE 0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM 4
+#endif
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 0000000..caa20e5
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 0000000..8b3d803
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ #include <linux/delay.h>
+#else
+ #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 0000000..5d51013
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw.h
+*
+* @brief API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+ System specific channel ID should be defined as follows
+
+ For example:
+
+ #include <dmacHw.h>
+ ...
+ #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5)
+ #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0)
+ #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1)
+ #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3)
+ #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4)
+ ...
+ #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4)
+ #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5)
+ #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6)
+ ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c)
+
+typedef enum {
+ dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */
+ dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */
+ dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */
+ dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */
+ dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */
+ dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */
+ dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */
+ dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+ dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */
+ dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */
+ dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */
+ dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+ dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */
+ dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */
+ dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+ dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */
+ dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */
+ dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+ dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+ dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */
+ dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */
+ dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */
+ dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+ dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */
+ dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+ dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */
+ dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */
+ dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */
+ dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+ dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */
+ dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */
+ dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */
+ dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */
+ dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */
+typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using
+ "dmacHw_MAKE_CHANNEL_ID" macro
+ */
+/* DMA channel configuration parameters */
+typedef struct {
+ uint32_t srcPeripheralPort; /* Source peripheral port */
+ uint32_t dstPeripheralPort; /* Destination peripheral port */
+ uint32_t srcStatusRegisterAddress; /* Source status register address */
+ uint32_t dstStatusRegisterAddress; /* Destination status register address of type */
+
+ uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */
+ uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
+ uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */
+ uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */
+ uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor.
+ 0 = Maximum possible.
+ */
+
+ dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
+ dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
+ dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */
+ dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */
+ dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */
+ dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */
+ dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */
+ dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */
+ dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */
+ dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */
+ dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */
+ dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */
+ dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */
+ dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */
+ dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+* @brief Initializes DMA
+*
+* This function initializes DMA CSP driver
+*
+* @note
+* Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+* @brief Exit function for DMA
+*
+* This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+* @brief Gets a handle to a DMA channel
+*
+* This function returns a handle, representing a control block of a particular DMA channel
+*
+* @return -1 - On Failure
+* handle - On Success, representing a channel control block
+*
+* @note
+* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes a DMA channel for use
+*
+* This function initializes and resets a DMA channel for use
+*
+* @return -1 - On Failure
+* 0 - On Success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Initializes descriptor ring
+*
+* This function will initializes the descriptor ring of a DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+* @note
+* - "len" parameter should be obtained from "dmacHw_descriptorLen"
+* - Descriptor buffer MUST be 32 bit aligned and uncached as it
+* is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+ uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+ uint32_t len, /* [ IN ] Size of the pBuf */
+ uint32_t num /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Finds amount of memory required to form a descriptor ring
+*
+*
+* @return Number of bytes required to form a descriptor ring
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure DMA channel
+*
+* @return 0 : On success
+* -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptors for known data length
+*
+* When DMA has to work as a flow controller, this function prepares the
+* descriptor chain to transfer data
+*
+* from:
+* - Memory to memory
+* - Peripheral to memory
+* - Memory to Peripheral
+* - Peripheral to Peripheral
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indicates whether DMA transfer is in progress or completed
+*
+* @return DMA transfer status
+* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing
+* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed
+* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ );
+
+/****************************************************************************/
+/**
+* @brief Read data DMA transferred to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ );
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will form the descriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return -1 - On failure
+* 0 - On success
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to initiate transfer
+*
+* @return void
+*
+*
+* @note
+* - Descriptor buffer MUST ALWAYS be flushed before calling this function
+* - This function should also be called from ISR to program the channel with
+* pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ );
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+* of type dmacHw_INTERRUPT_STATUS_e
+* @note
+* This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ );
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ );
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+*
+* @return void
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Provides DMA controller attributes
+*
+*
+* @return DMA controller attributes
+*
+* @note
+* None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 0000000..51357dd
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 0000000..1c639c8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+* @file intcHw.h
+*
+* @brief generic interrupt controller API
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 0000000..c30d2a5
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+ #include <linux/module.h>
+#else
+ #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 0000000..e5f60bf
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file reg.h
+*
+* @brief Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x) (*((volatile uint32_t *)(x)))
+#define __REG16(x) (*((volatile uint16_t *)(x)))
+#define __REG8(x) (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/* typedef struct */
+/* { */
+/* uint32_t reg1; offset 0x00 */
+/* uint32_t reg2; offset 0x04 */
+/* uint32_t reg3; offset 0x08 */
+/* uint32_t reg4; offset 0x0c */
+/* REG32_RSVD(0x10, 0x20); */
+/* uint32_t reg5; offset 0x20 */
+/* ... */
+/* } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */
+/* flags variable to be declared locally. */
+/* e.g. */
+/* statement1; */
+/* { */
+/* REG_LOCAL_IRQ_SAVE; */
+/* <multiple statements here> */
+/* REG_LOCAL_IRQ_RESTORE; */
+/* } */
+/* statement2; */
+/* */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \
+ unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg &= value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg |= value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+ uint32_t value)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *reg = (*reg & mask) | value;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+ *reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 0000000..b9d7e07
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw.h
+*
+* @brief Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+ secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */
+ secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+* @brief Requesting to execute the function in secure mode
+*
+* This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */
+ );
+
+/****************************************************************************/
+/**
+* @brief Sets the mode
+*
+* his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE /* Processor mode */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the current mode
+*
+* This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 0000000..3a8718b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 0000000..ad9e400
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+ #include <linux/string.h>
+#else
+ #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 0000000..f1236d0
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw.h
+*
+* @brief API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t; /* Timer ID */
+typedef uint32_t tmrHw_COUNT_t; /* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */
+typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */
+
+typedef enum {
+ tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */
+ tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+ tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */
+ tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+* @brief Get timer capability
+*
+* This function returns various capabilities/attributes of a timer
+*
+* @return Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer in terms of timer interrupt rate
+*
+* This function initializes a periodic timer to generate specific number of
+* timer interrupt per second
+*
+* @return On success: Effective timer frequency
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt after
+* certain time interval
+*
+* This function initializes a periodic timer to generate timer interrupt
+* after every time interval in milisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a periodic timer to generate timer interrupt just once
+* after certain time interval
+*
+* This function initializes a periodic timer to generate a single ticks after
+* certain time interval in milisecond
+*
+* @return On success: Effective interval set in mili-second
+* On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+* @brief Configures a timer to run as a free running timer
+*
+* This function initializes a timer to run as a free running timer
+*
+* @return Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */
+ uint32_t divider /* [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Starts a timer
+*
+* This function starts a preconfigured timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Stops a timer
+*
+* This function stops a running timer
+*
+* @return -1 - On Failure
+* 0 - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets current timer count
+*
+* This function returns the current timer value
+*
+* @return Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Gets timer count rate
+*
+* This function returns the number of counts per second
+*
+* @return Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables timer interrupt
+*
+* This function enables the timer interrupt
+*
+* @return N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Disables timer interrupt
+*
+* This function disable the timer interrupt
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the timer interrupt
+*
+* @return N/A
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Gets the interrupt status
+*
+* This function returns timer interrupt status
+*
+* @return Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+* @brief Indentifies a timer causing interrupt
+*
+* This functions returns a timer causing interrupt
+*
+* @return 0xFFFFFFFF : No timer causing an interrupt
+* ! 0xFFFFFFFF : timer causing an interrupt
+* @note
+* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+* @brief Displays specific timer registers
+*
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+* @brief Use a timer to perform a busy wait delay for a number of usecs.
+*
+* @return N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */
+ unsigned long usecs /* [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 0000000..30fa2d5
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+ CAP_NOT_PRESENT = 0,
+ CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+ CAP_VPM,
+ CAP_ETH_PHY,
+ CAP_ETH_GMII,
+ CAP_ETH_SGMII,
+ CAP_USB,
+ CAP_TSC,
+ CAP_EHSS,
+ CAP_SDIO,
+ CAP_UARTB,
+ CAP_KEYPAD,
+ CAP_CLCD,
+ CAP_GE,
+ CAP_LEDM,
+ CAP_BBL,
+ CAP_VDEC,
+ CAP_PIF,
+ CAP_APM,
+ CAP_SPU,
+ CAP_PKA,
+ CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+ CAP_LCD_WVGA = 0,
+ CAP_LCD_VGA = 0x1,
+ CAP_LCD_WQVGA = 0x2,
+ CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 0000000..933ce68
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS 0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS 0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS 0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS 0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS 0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS 0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS 0x00000040
+#define CAP_CONFIG0_USB0_DIS 0x00000080
+#define CAP_CONFIG0_USB1_DIS 0x00000100
+#define CAP_CONFIG0_TSC_DIS 0x00000200
+#define CAP_CONFIG0_EHSS0_DIS 0x00000400
+#define CAP_CONFIG0_EHSS1_DIS 0x00000800
+#define CAP_CONFIG0_SDIO0_DIS 0x00001000
+#define CAP_CONFIG0_SDIO1_DIS 0x00002000
+#define CAP_CONFIG0_UARTB_DIS 0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS 0x00008000
+#define CAP_CONFIG0_CLCD_DIS 0x00010000
+#define CAP_CONFIG0_GE_DIS 0x00020000
+#define CAP_CONFIG0_LEDM_DIS 0x00040000
+#define CAP_CONFIG0_BBL_DIS 0x00080000
+#define CAP_CONFIG0_VDEC_DIS 0x00100000
+#define CAP_CONFIG0_PIF_DIS 0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS 0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS 0x00800000
+
+#define CAP_CONFIG1_APMA_DIS 0x00000001
+#define CAP_CONFIG1_APMB_DIS 0x00000002
+#define CAP_CONFIG1_APMC_DIS 0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK 0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT 9
+#define CAP_CONFIG1_CLCD_RES_WVGA (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS 0x00000010
+#define CAP_CONFIG2_PKA_DIS 0x00000020
+#define CAP_CONFIG2_RNG_DIS 0x00000080
+
+#if (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+* cap_isPresent -
+*
+* PURPOSE:
+* Determines if the chip has a certain capability present
+*
+* PARAMETERS:
+* capability - type of capability to determine if present
+*
+* RETURNS:
+* CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+ CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+ switch (capability) {
+ case CAP_VPM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_PHY:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_GMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_ETH_SGMII:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_USB:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_TSC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_EHSS:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SDIO:
+ {
+ if ((index == 0)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_UARTB:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_KEYPAD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_CLCD:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_GE:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_LEDM:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_BBL:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_VDEC:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PIF:
+ {
+ if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_APM:
+ {
+ if ((index == 0)
+ && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 1)
+ && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ if ((index == 2)
+ && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_SPU:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_PKA:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ case CAP_RNG:
+ {
+ if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+ returnVal = CAP_PRESENT;
+ }
+ }
+ break;
+
+ default:
+ {
+ }
+ break;
+ }
+ return returnVal;
+}
+
+/****************************************************************************
+* cap_getMaxArmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the ARM CPU
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+ return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxVpmSpeedHz -
+*
+* PURPOSE:
+* Determines the maximum speed of the VPM
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+ return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+ return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+* cap_getMaxLcdRes -
+*
+* PURPOSE:
+* Determines the maximum LCD resolution capabilities
+*
+* PARAMETERS:
+* none
+*
+* RETURNS:
+* CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+ return (CAP_LCD_RES_T)
+ ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+ CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 0000000..70eaea8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN 0
+#define chipcHw_VPM_HW_PHASE_ALIGN 0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+ chipcHw_CLOCK_DDR, /* DDR PHY Clock */
+ chipcHw_CLOCK_ARM, /* ARM Clock */
+ chipcHw_CLOCK_ESW, /* Ethernet Switch Clock */
+ chipcHw_CLOCK_VPM, /* VPM Clock */
+ chipcHw_CLOCK_ESW125, /* Ethernet MII Clock */
+ chipcHw_CLOCK_UART, /* UART Clock */
+ chipcHw_CLOCK_SDIO0, /* SDIO 0 Clock */
+ chipcHw_CLOCK_SDIO1, /* SDIO 1 Clock */
+ chipcHw_CLOCK_SPI, /* SPI Clock */
+ chipcHw_CLOCK_ETM, /* ARM ETM Clock */
+
+ chipcHw_CLOCK_BUS, /* BUS Clock */
+ chipcHw_CLOCK_OTP, /* OTP Clock */
+ chipcHw_CLOCK_I2C, /* I2C Host Clock */
+ chipcHw_CLOCK_I2S0, /* I2S 0 Host Clock */
+ chipcHw_CLOCK_RTBUS, /* DDR PHY Configuration Clock */
+ chipcHw_CLOCK_APM100, /* APM100 Clock */
+ chipcHw_CLOCK_TSC, /* Touch screen Clock */
+ chipcHw_CLOCK_LED, /* LED Clock */
+
+ chipcHw_CLOCK_USB, /* USB Clock */
+ chipcHw_CLOCK_LCD, /* LCD CLock */
+ chipcHw_CLOCK_APM, /* APM Clock */
+
+ chipcHw_CLOCK_I2S1, /* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+ chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+ chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+ chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+ chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+ chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+ chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+ chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+ chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+ chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+ chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+ chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+ chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+ chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+ chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+ chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+ chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+ chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+ chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+ chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+ chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+ chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+ chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+ chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+ chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+ chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+ chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+ chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+ chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+ chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+ chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+ chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+ chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+ chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+ chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+ chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+ chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+ chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+ chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+ chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+ chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+ chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum */
+typedef enum {
+ chipcHw_SPREAD_SPECTRUM_DISALLOW, /* Spread spectrum support is not allowed */
+ chipcHw_SPREAD_SPECTRUM_ALLOW /* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+ chipcHw_SPREAD_SPECTRUM_e ssSupport; /* Allow/Disalow to support spread spectrum.
+ If supported, call chipcHw_enableSpreadSpectrum ()
+ to activate the spread spectrum with desired spread. */
+ uint32_t pllVcoFreqHz; /* PLL VCO frequency in Hz */
+ uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */
+ uint32_t busClockFreqHz; /* Bus clock frequency in Hz */
+ uint32_t armBusRatio; /* ARM clock : Bus clock */
+ uint32_t vpmBusRatio; /* VPM clock : Bus clock */
+ uint32_t ddrBusRatio; /* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+ chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+ chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+ chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+ chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+ chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+ chipcHw_DDR_HW_PHASE_MARGIN_STRICT, /* Strict margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for DDR phase align condition */
+ chipcHw_DDR_HW_PHASE_MARGIN_WIDE /* Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+ chipcHw_VPM_HW_PHASE_MARGIN_STRICT, /* Strict margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for VPM phase align condition */
+ chipcHw_VPM_HW_PHASE_MARGIN_WIDE /* Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+ /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */
+#define chipcHw_PIN_NVI_A (chipcHw_GPIO_COUNT + 1) /* NVI Interface */
+#define chipcHw_PIN_NVI_D (chipcHw_GPIO_COUNT + 2) /* NVI Interface */
+#define chipcHw_PIN_NVI_OEB (chipcHw_GPIO_COUNT + 3) /* NVI Interface */
+#define chipcHw_PIN_NVI_WEB (chipcHw_GPIO_COUNT + 4) /* NVI Interface */
+#define chipcHw_PIN_NVI_CS (chipcHw_GPIO_COUNT + 5) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB (chipcHw_GPIO_COUNT + 6) /* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP (chipcHw_GPIO_COUNT + 7) /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB (chipcHw_GPIO_COUNT + 8) /* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17 (chipcHw_GPIO_COUNT + 9) /* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20 (chipcHw_GPIO_COUNT + 10) /* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23 (chipcHw_GPIO_COUNT + 11) /* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER (chipcHw_GPIO_COUNT + 12) /* LCD Power */
+#define chipcHw_PIN_CL_ACK (chipcHw_GPIO_COUNT + 13) /* LCD Ack */
+#define chipcHw_PIN_CL_FP (chipcHw_GPIO_COUNT + 14) /* LCD FP */
+#define chipcHw_PIN_CL_LP (chipcHw_GPIO_COUNT + 15) /* LCD LP */
+#define chipcHw_PIN_UARTRXD (chipcHw_GPIO_COUNT + 16) /* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+* @brief Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL1
+*
+* This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, /* [ IN ] VCO frequency in Hz */
+ chipcHw_SPREAD_SPECTRUM_e ssSupport /* [ IN ] SS status */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Enables the PLL2
+*
+* This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz /* [ IN ] VCO frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set clock fequency for miscellaneous configurable clocks
+*
+* This function sets clock frequency
+*
+* @return Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */
+ uint32_t freq /* [ IN ] Clock frequency in Hz */
+ ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+* @brief Set VPM clock in sync with BUS clock
+*
+* This function does the phase adjustment between VPM and BUS clock
+*
+* @return >= 0 : On success ( # of adjustment required )
+* -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+* @brief Enables core a clock of a certain device
+*
+* This function enables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @return void
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetDisable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+static inline void chipcHw_softResetEnable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get software override strap options
+*
+* Retrieves software override strap options
+*
+* @return Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+* @brief Get pin strap options
+*
+* Retrieves pin strap options
+*
+* @return Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get valid pin strap options
+*
+* Retrieves valid pin strap options
+*
+* @return valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin /* GPIO Pin number */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin, /* GPIO Pin number */
+ chipcHw_GPIO_FUNCTION_e func /* Configuration function */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_SLEW_RATE_e slewRate /* Pin slew rate */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_CURRENT_STRENGTH_e curr /* Pin current rating */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_PULL_e pullup /* Pullup register settings */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+ chipcHw_PIN_INPUTTYPE_e inputType /* Pin input type */
+ );
+
+/****************************************************************************/
+/**
+* @brief Retrieves a string representation of the mux setting for a pin.
+*
+* @return Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/** @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/** @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+ uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin /* Margin alinging DDR phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin /* Margin alinging VPM phase */
+ );
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */
+ );
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 0000000..c78833a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+ chipcHw_OPTYPE_BYPASS, /* Bypass operation */
+ chipcHw_OPTYPE_OUTPUT /* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+* @brief Get Numeric Chip ID
+*
+* This function returns Chip ID that includes the revison number
+*
+* @return Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+ return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable Spread Spectrum
+*
+* @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+ if ((pChipcHw->
+ PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+ chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+ (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+ (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+ ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+ ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+ ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Chip Product ID
+*
+* This function returns Chip Product ID
+*
+* @return Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+ return (pChipcHw->
+ ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+ chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get revision number
+*
+* This function returns revision number of the chip
+*
+* @return Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+ return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bus interface clock
+*
+* Enables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables bus interface clock
+*
+* Disables bus interface clock of various device
+*
+* @return void
+*
+* @note use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Get status (enabled/disabled) of bus interface clock
+*
+* This function returns the status of devices' bus interface clock
+*
+* @return Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+ return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables various audio channels
+*
+* Enables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Disables various audio channels
+*
+* Disables audio channel
+*
+* @return void
+*
+* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Soft resets devices
+*
+* Soft resets various devices
+*
+* @return void
+*
+* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+ chipcHw_softResetEnable(mask);
+ chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ /* Deassert module soft reset */
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 ^= ctrl1;
+ pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+ uint32_t unhold = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->SoftReset1 |= ctrl1;
+ /* Mask out unhold request bits */
+ pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+ /* Process unhold requests */
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+ unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+ }
+
+ if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+ unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+ }
+
+ if (unhold) {
+ /* Make sure unhold request is effective */
+ pChipcHw->SoftReset1 &= ~unhold;
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Configures misc CHIP functionality
+*
+* Configures CHIP functionality
+*
+* @return void
+*
+* @note use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+ reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+* @brief Set OTP options
+*
+* Set OTP options
+*
+* @return void
+*
+* @note use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+ uint32_t ctrl1 = (uint32_t) mask;
+ uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+ reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+ reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+* @brief Get sticky bits
+*
+* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+ return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+* @brief Set sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask & chipcHw_REG_STICKY_POR_BROM) {
+ bits |= chipcHw_REG_STICKY_POR_BROM;
+ } else {
+ uint32_t sticky;
+ sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+ bits |= chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear sticky bits
+*
+* @return void
+*
+* @note use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+ uint32_t bits = 0;
+
+ REG_LOCAL_IRQ_SAVE;
+ if (mask &
+ (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+ chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+ chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+ uint32_t sticky = pChipcHw->Sticky;
+
+ if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+ && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+ bits = chipcHw_REG_STICKY_BOOT_DONE;
+ mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_1;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_2;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_3;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_4;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+ }
+ if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+ && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+ bits |= chipcHw_REG_STICKY_GENERAL_5;
+ mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+ }
+ }
+ pChipcHw->Sticky = bits | mask;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get software strap value
+*
+* Retrieves software strap value
+*
+* @return Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+ return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Set software override strap options
+*
+* set software override strap options
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+ reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+* @brief Get Pin Strap Options
+*
+* This function returns the raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+ return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Get Valid Strap Options
+*
+* This function returns the valid raw boot strap options
+*
+* @return strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+ uint32_t softStraps;
+
+ /*
+ ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+ ** which copies HW straps to soft straps if there is no override
+ */
+ softStraps = chipcHw_getSoftStraps();
+
+ return softStraps;
+}
+
+/****************************************************************************/
+/**
+* @brief Initialize valid pin strap options
+*
+* Retrieves valid pin strap options by copying HW strap options to soft register
+* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+* @return nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+ uint32_t softStraps;
+
+ REG_LOCAL_IRQ_SAVE;
+ softStraps = chipcHw_getSoftStraps();
+
+ if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+ /* Copy HW straps to software straps */
+ chipcHw_setSoftStraps(chipcHw_getPinStraps());
+ }
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot device
+*
+* This function returns the device type used in booting the system
+*
+* @return Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get boot mode
+*
+* This function returns the way the system was booted
+*
+* @return Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash page size
+*
+* This function returns the NAND device page size
+*
+* @return Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+ return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+* @brief Get NAND flash address cycle configuration
+*
+* This function returns the NAND flash address cycle configuration
+*
+* @return 0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+ if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Activates PIF interface
+*
+* This function activates PIF interface by taking control of LCD pins
+*
+* @note
+* When activated, LCD pins will be defined as follows for PIF operation
+*
+* CLD[17:0] = pif_data[17:0]
+* CLD[23:18] = pif_address[5:0]
+* CLPOWER = pif_wr_str
+* CLCP = pif_rd_str
+* CLAC = pif_hat1
+* CLFP = pif_hrdy1
+* CLLP = pif_hat2
+* GPIO[42] = pif_hrdy2
+*
+* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Activates LCD interface
+*
+* This function activates LCD interface
+*
+* @note
+* When activated, LCD pins will be defined as follows
+*
+* CLD[17:0] = LCD data
+* CLD[23:18] = LCD data
+* CLPOWER = LCD power
+* CLCP =
+* CLAC = LCD ack
+* CLFP =
+* CLLP =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+* @brief Deactivates PIF/LCD interface
+*
+* This function deactivates PIF/LCD interface
+*
+* @note
+* When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+ reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE2
+*
+* This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Select GE3
+*
+* This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+* @brief Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+ return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+ (chipcHw_REG_GPIO_MUX_MASK <<
+ chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+ chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+* @brief Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+ chipcHw_GPIO_FUNCTION_e func)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+ ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+ func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin slew rate
+*
+* This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+ chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+ ~(chipcHw_REG_SLEW_RATE_MASK <<
+ chipcHw_REG_SLEW_RATE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+ (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin output drive current
+*
+* This function sets output drive current of individual pin
+*
+* Note: Avoid the use of the word 'current' since linux headers define this
+* to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+ chipcHw_PIN_CURRENT_STRENGTH_e
+ curr)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+ ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+ (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin pullup register
+*
+* This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+ ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+ (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set Pin input type
+*
+* This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+ chipcHw_PIN_INPUTTYPE_e inputType)
+{
+ REG_LOCAL_IRQ_SAVE;
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+ ~(chipcHw_REG_INPUTTYPE_MASK <<
+ chipcHw_REG_INPUTTYPE_POSITION(pin));
+ *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+ (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Power up the USB PHY
+*
+* This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+* @brief Power down the USB PHY
+*
+* This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as host
+*
+* This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+ reg32_modify_or(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+* @brief Set the 2nd USB as device
+*
+* This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+ reg32_modify_and(&pChipcHw->MiscCtrl,
+ chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+* @brief Lower layer funtion to enable/disable a clock of a certain device
+*
+* This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+ chipcHw_OPTYPE_e type, int mode)
+{
+ volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+ volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+ switch (clock) {
+ case chipcHw_CLOCK_DDR:
+ pPLLReg = &pChipcHw->DDRClock;
+ break;
+ case chipcHw_CLOCK_ARM:
+ pPLLReg = &pChipcHw->ARMClock;
+ break;
+ case chipcHw_CLOCK_ESW:
+ pPLLReg = &pChipcHw->ESWClock;
+ break;
+ case chipcHw_CLOCK_VPM:
+ pPLLReg = &pChipcHw->VPMClock;
+ break;
+ case chipcHw_CLOCK_ESW125:
+ pPLLReg = &pChipcHw->ESW125Clock;
+ break;
+ case chipcHw_CLOCK_UART:
+ pPLLReg = &pChipcHw->UARTClock;
+ break;
+ case chipcHw_CLOCK_SDIO0:
+ pPLLReg = &pChipcHw->SDIO0Clock;
+ break;
+ case chipcHw_CLOCK_SDIO1:
+ pPLLReg = &pChipcHw->SDIO1Clock;
+ break;
+ case chipcHw_CLOCK_SPI:
+ pPLLReg = &pChipcHw->SPIClock;
+ break;
+ case chipcHw_CLOCK_ETM:
+ pPLLReg = &pChipcHw->ETMClock;
+ break;
+ case chipcHw_CLOCK_USB:
+ pPLLReg = &pChipcHw->USBClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_LCD:
+ pPLLReg = &pChipcHw->LCDClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_APM:
+ pPLLReg = &pChipcHw->APMClock;
+ if (type == chipcHw_OPTYPE_OUTPUT) {
+ if (mode) {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+ }
+ }
+ break;
+ case chipcHw_CLOCK_BUS:
+ pClockCtrl = &pChipcHw->ACLKClock;
+ break;
+ case chipcHw_CLOCK_OTP:
+ pClockCtrl = &pChipcHw->OTPClock;
+ break;
+ case chipcHw_CLOCK_I2C:
+ pClockCtrl = &pChipcHw->I2CClock;
+ break;
+ case chipcHw_CLOCK_I2S0:
+ pClockCtrl = &pChipcHw->I2S0Clock;
+ break;
+ case chipcHw_CLOCK_RTBUS:
+ pClockCtrl = &pChipcHw->RTBUSClock;
+ break;
+ case chipcHw_CLOCK_APM100:
+ pClockCtrl = &pChipcHw->APM100Clock;
+ break;
+ case chipcHw_CLOCK_TSC:
+ pClockCtrl = &pChipcHw->TSCClock;
+ break;
+ case chipcHw_CLOCK_LED:
+ pClockCtrl = &pChipcHw->LEDClock;
+ break;
+ case chipcHw_CLOCK_I2S1:
+ pClockCtrl = &pChipcHw->I2S1Clock;
+ break;
+ }
+
+ if (pPLLReg) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ /* PLL clock output enable/disable */
+ if (mode) {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock enable is inverted */
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ } else {
+ if (clock == chipcHw_CLOCK_DDR) {
+ /* DDR clock disable is inverted */
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+ }
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ /* PLL clock bypass enable/disable */
+ if (mode) {
+ reg32_modify_or(pPLLReg,
+ chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pPLLReg,
+ ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ } else if (pClockCtrl) {
+ switch (type) {
+ case chipcHw_OPTYPE_OUTPUT:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+ }
+ break;
+ case chipcHw_OPTYPE_BYPASS:
+ if (mode) {
+ reg32_modify_or(pClockCtrl,
+ chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ } else {
+ reg32_modify_and(pClockCtrl,
+ ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+ }
+ break;
+ }
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Disables a core clock of a certain device
+*
+* This function disables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+ /* Disable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+* @brief Enable a core clock of a certain device
+*
+* This function enables a core clock
+*
+* @note no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+ /* Enable output of the clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Enables bypass clock of a certain device
+*
+* This function enables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+ /* Enable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+* @brief Disabled bypass clock of a certain device
+*
+* This function disables bypass clock
+*
+* @note Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+ /* Disable bypass clock */
+ chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/** @brief Checks if software strap is enabled
+ *
+ * @return 1 : When enable
+ * 0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+ return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/** @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+ reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/** @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+ reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/** @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+ reg32_modify_or(&pChipcHw->PLLConfig2,
+ chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+ reg32_modify_and(&pChipcHw->PLLConfig2,
+ ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/** @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+ return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+ return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/** @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+ pChipcHw->PLLConfig2 |=
+ (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/** @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/** @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+ return (uint8_t) ((pChipcHw->
+ PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+ >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM SW phase alignment interrupt mode
+*
+* This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+ REG_LOCAL_IRQ_SAVE;
+ if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+ pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ } else {
+ pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+ }
+ pChipcHw->VPMPhaseCtrl2 =
+ (pChipcHw->
+ VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+ chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->DDRPhaseCtrl1 &=
+ ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->DDRPhaseCtrl1 |=
+ ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+ uint32_t ge = 0;
+ uint32_t le = 0;
+
+ switch (margin) {
+ case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+ ge = 0x0F;
+ le = 0x0F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+ ge = 0x03;
+ le = 0x3F;
+ break;
+ case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+ ge = 0x01;
+ le = 0x7F;
+ break;
+ }
+
+ {
+ REG_LOCAL_IRQ_SAVE;
+
+ pChipcHw->VPMPhaseCtrl1 &=
+ ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+ chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ pChipcHw->VPMPhaseCtrl1 |=
+ ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+ || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+ REG_LOCAL_IRQ_RESTORE;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Checks DDR phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Checks VPM phase aligned status done by HW
+*
+* @return 1: When aligned
+* 0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+ chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+ chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+ chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+ return (pChipcHw->
+ PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+ chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &=
+ ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->DDRPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout count
+*
+* @note If HW fails to perform the phase alignment, it will trigger
+* a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &=
+ ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+ pChipcHw->VPMPhaseCtrl2 |=
+ (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+ chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ /* Clear timeout interrupt service bit */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+ /* Enable timeout interrupt */
+ pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+* @brief VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+ REG_LOCAL_IRQ_SAVE;
+ pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+ REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 0000000..b162448
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file chipcHw_reg.h
+*
+* @brief Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC
+
+typedef struct {
+ uint32_t ChipId; /* Chip ID */
+ uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */
+ uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */
+ uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */
+ uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */
+ uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */
+ uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */
+ uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */
+ uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */
+ uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */
+ uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */
+
+ uint32_t ACLKClock; /* ACLK Clock (Divider) */
+ uint32_t OTPClock; /* OTP Clock (Divider) */
+ uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */
+ uint32_t I2S0Clock; /* I2S0 Clock (Divider) */
+ uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */
+ uint32_t pad1;
+ uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */
+ uint32_t TSCClock; /* TSC Clock (Divider) */
+ uint32_t LEDClock; /* LED Clock (Divider) */
+
+ uint32_t USBClock; /* PLL2 Channel 1 for USB clock */
+ uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */
+ uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */
+
+ uint32_t BusIntfClock; /* Bus interface clock */
+
+ uint32_t PLLStatus; /* PLL status register (PLL1) */
+ uint32_t PLLConfig; /* PLL configuration register (PLL1) */
+ uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */
+ uint32_t PLLDivider; /* PLL divider control register (PLL1) */
+ uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */
+ uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */
+
+ uint32_t I2S1Clock; /* I2S1 Clock */
+ uint32_t AudioEnable; /* Enable/ disable audio channel */
+ uint32_t SoftReset1; /* Reset blocks */
+ uint32_t SoftReset2; /* Reset blocks */
+ uint32_t Spare1; /* Phase align interrupts */
+ uint32_t Sticky; /* Sticky bits */
+ uint32_t MiscCtrl; /* Misc. control */
+ uint32_t pad3[3];
+
+ uint32_t PLLStatus2; /* PLL status register (PLL2) */
+ uint32_t PLLConfig2; /* PLL configuration register (PLL2) */
+ uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */
+ uint32_t PLLDivider2; /* PLL divider control register (PLL2) */
+ uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */
+ uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */
+
+ uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */
+ uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */
+ uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */
+ uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+ uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */
+ uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */
+ uint32_t pad4[9];
+
+ uint32_t SoftOTP1; /* Software OTP control */
+ uint32_t SoftOTP2; /* Software OTP control */
+ uint32_t SoftStraps; /* Software strap */
+ uint32_t PinStraps; /* Pin Straps */
+ uint32_t DiffOscCtrl; /* Diff oscillator control */
+ uint32_t DiagsCtrl; /* Diagnostic control */
+ uint32_t DiagsOutputCtrl; /* Diagnostic output enable */
+ uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */
+
+ uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */
+
+ uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */
+ uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */
+ uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */
+ uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */
+ uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */
+ uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */
+ uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */
+ uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */
+
+ uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */
+ uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */
+ uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */
+ uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */
+ uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */
+ uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */
+ uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */
+ uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */
+ uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */
+ uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */
+
+ uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */
+ uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */
+ uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */
+ uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */
+ uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */
+
+ uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */
+ uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */
+ uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT 12
+#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF
+#define chipcHw_REG_REV_A0 0xA00
+#define chipcHw_REG_REV_B0 0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask
+
+ 00000000 = divide-by-256
+ 00000001 = divide-by-1
+ 00000010 = divide-by-2
+ 00000011 = divide-by-3
+ 00000100 = divide-by-4
+ 00000101 = divide-by-5
+ 00000110 = divide-by-6
+ .
+ .
+ 11111011 = divide-by-251
+ 11111100 = divide-by-252
+ 11111101 = divide-by-253
+ 11111110 = divide-by-254
+ */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1 1
+#define chipcHw_REG_PLL_PREDIVIDER_P2 1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+ chipcHw_REG_PLL_DIVIDER_FRAC
+ = 0, when SS is disable
+ */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */
+#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */
+
+#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */
+ /* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */
+ /* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */
+#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */
+ /* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */
+ /* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */
+
+ /* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */
+ /* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0
+ /* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24
+#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8
+#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0
+ /* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0
+ /* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26
+#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000
+#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0
+
+#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 0000000..f1b68e2
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file ddrcReg.h
+*
+* @brief Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t memcStatus;
+ uint32_t memcCmd;
+ uint32_t directCmd;
+ uint32_t memoryCfg;
+ uint32_t refreshPrd;
+ uint32_t casLatency;
+ uint32_t writeLatency;
+ uint32_t tMrd;
+ uint32_t tRas;
+ uint32_t tRc;
+ uint32_t tRcd;
+ uint32_t tRfc;
+ uint32_t tRp;
+ uint32_t tRrd;
+ uint32_t tWr;
+ uint32_t tWtr;
+ uint32_t tXp;
+ uint32_t tXsr;
+ uint32_t tEsr;
+ uint32_t memoryCfg2;
+ uint32_t memoryCfg3;
+ uint32_t tFaw;
+ } ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET 0x0000
+#define ddrcReg_CTLR_MEMC_REGP ((volatile ddrcReg_CTLR_MEMC_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4 (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8 (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0 (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1 (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2 (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4 (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1 (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2 (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3 (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4 (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2 (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16 (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32 (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64 (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128 (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT 20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT 16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT 0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1 (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2 (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3 (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4 (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0 (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1 (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2 (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3 (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4 (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5 (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6 (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7 (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4 (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8 (0x3 << 15) /* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT 7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11 (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12 (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13 (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14 (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15 (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16 (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9 (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10 (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11 (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT 0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT 1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT 0
+#define ddrcReg_CTLR_T_MRD_MASK (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT 0
+#define ddrcReg_CTLR_T_RAS_MASK (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT 0
+#define ddrcReg_CTLR_T_RC_MASK (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT 0
+#define ddrcReg_CTLR_T_RCD_MASK (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT 0
+#define ddrcReg_CTLR_T_RFC_MASK (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT 0
+#define ddrcReg_CTLR_T_RP_MASK (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT 0
+#define ddrcReg_CTLR_T_RRD_MASK (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT 0
+#define ddrcReg_CTLR_T_WR_MASK (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT 0
+#define ddrcReg_CTLR_T_WTR_MASK (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT 0
+#define ddrcReg_CTLR_T_XP_MASK (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT 0
+#define ddrcReg_CTLR_T_XSR_MASK (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT 0
+#define ddrcReg_CTLR_T_ESR_MASK (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2 (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3 (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT 0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT 8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT 16
+#define ddrcReg_CTLR_QOS_MAX (ddrcReg_CTLR_QOS_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+ } ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET 0x100
+#define ddrcReg_CTLR_QOS_REGP ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT 2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT 1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT 4
+#define ddrcReg_CTLR_CHIP_MAX (ddrcReg_CTLR_CHIP_CNT - 1)
+
+ typedef struct {
+ uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+ } ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET 0x200
+#define ddrcReg_CTLR_CHIP_REGP ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT 8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT 0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT 2
+
+ typedef struct {
+ uint32_t input;
+ uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+ uint32_t feature;
+ } ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET 0x300
+#define ddrcReg_CTLR_USER_REGP ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT 0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT 0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT 1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t pmCtl;
+ REG32_RSVD(0x0008, 0x0010);
+ uint32_t pllStatus;
+ uint32_t pllCfg;
+ uint32_t pllPreDiv;
+ uint32_t pllDiv;
+ uint32_t pllCtl1;
+ uint32_t pllCtl2;
+ uint32_t ssCtl;
+ uint32_t ssCfg;
+ uint32_t vdlStatic;
+ uint32_t vdlDynamic;
+ uint32_t padIdle;
+ uint32_t pvtComp;
+ uint32_t padDrive;
+ uint32_t clkRgltrCtl;
+ } ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK 0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK 10 /* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK 0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT 0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT 30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT 27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT 24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT 22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT 19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT 17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT 15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT 13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT 10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT 5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT 2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT 20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT 16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT 12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT 8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT 4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT 0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT 2
+#define ddrcReg_PHY_BYTE_LANE_MAX (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT 8
+
+ typedef struct {
+ uint32_t revision;
+ uint32_t vdlCalibrate;
+ uint32_t vdlStatus;
+ REG32_RSVD(0x000c, 0x0010);
+ uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+ uint32_t readCtl;
+ uint32_t readStatus;
+ uint32_t readClear;
+ uint32_t padIdleCtl;
+ uint32_t padDriveCtl;
+ uint32_t padClkCtl;
+ uint32_t writeCtl;
+ uint32_t clkRegCtl;
+ } ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET 0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET 0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT 12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P 0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N 1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN 2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM 3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P 4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N 5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN 6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM 7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT 8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT 0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18 (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3 (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+ typedef struct {
+ uint32_t cfg;
+ uint32_t actMonCnt;
+ uint32_t ctl;
+ uint32_t lbistCtl;
+ uint32_t lbistSeed;
+ uint32_t lbistStatus;
+ uint32_t tieOff;
+ uint32_t actMonClear;
+ uint32_t status;
+ uint32_t user;
+ } ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET 0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT 18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT 17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT 16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT 15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT 9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT 8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT 7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT 6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT 0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+} /* end extern "C" */
+#endif
+#endif /* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 0000000..375066a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_priv.h
+*
+* @brief Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+ uint32_t sar; /* Source Adress Register.
+ Address must be aligned to CTLx.SRC_TR_WIDTH. */
+ uint32_t dar; /* Destination Address Register.
+ Address must be aligned to CTLx.DST_TR_WIDTH. */
+ uint32_t llpPhy; /* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+ Address MUST be aligned to a 32-bit boundary. */
+ dmacHw_REG64_t ctl; /* Control Register. 64 bits */
+ uint32_t sstat; /* Source Status Register */
+ uint32_t dstat; /* Destination Status Register */
+ uint32_t devCtl; /* Device specific control information */
+ uint32_t llp; /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ * Descriptor ring pointers
+ */
+typedef struct {
+ int num; /* Number of link items */
+ dmacHw_DESC_t *pHead; /* Head of descriptor ring (for writing) */
+ dmacHw_DESC_t *pTail; /* Tail of descriptor ring (for reading) */
+ dmacHw_DESC_t *pProg; /* Descriptor to program the channel (for programming the channel register) */
+ dmacHw_DESC_t *pEnd; /* End of current descriptor chain */
+ dmacHw_DESC_t *pFree; /* Descriptor to free memory (freeing dynamic memory) */
+ uint32_t virt2PhyOffset; /* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ * DMA channel control block
+ */
+typedef struct {
+ uint32_t module; /* DMA controller module (0-1) */
+ uint32_t channel; /* DMA channel (0-7) */
+ volatile uint32_t varDataStarted; /* Flag indicating variable data channel is enabled */
+ volatile uint32_t descUpdated; /* Flag to indicate descriptor update is complete */
+ void *userData; /* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a) if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT 16
+#define dmacHw_FREE_USER_MEMORY 0xFFFFFFFF
+#define dmacHw_DESC_FREE dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE 4064
+#define dmacHw_GET_DESC_RING(addr) (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte) ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp) ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle) ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp) ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt) (((tt) == dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+* @brief Get next available transaction width
+*
+*
+* @return On sucess : Next avail able transaction width
+* On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Current transaction width */
+ ) {
+ if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+ } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+ return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+ 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+ }
+
+ /* Default return */
+ return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+* @brief Get number of bytes per transaction
+*
+* @return Number of bytes per transaction
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Transaction width */
+ ) {
+ int width = 1;
+ switch (tw) {
+ case dmacHw_SRC_TRANSACTION_WIDTH_8:
+ width = 1;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_16:
+ case dmacHw_DST_TRANSACTION_WIDTH_16:
+ width = 2;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_32:
+ case dmacHw_DST_TRANSACTION_WIDTH_32:
+ width = 4;
+ break;
+ case dmacHw_SRC_TRANSACTION_WIDTH_64:
+ case dmacHw_DST_TRANSACTION_WIDTH_64:
+ width = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+
+ /* Default transaction width */
+ return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 0000000..891cea8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_reg.h
+*
+* @brief Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+ volatile uint32_t lo; /* Lower 32 bit in little endian mode */
+ volatile uint32_t hi; /* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+ dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.SRC_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
+ Address must be aligned to CTLx.DST_TR_WIDTH.
+ */
+ dmacHw_REG64_t ChannelLlp; /* Link List Pointer.64 bits (upper 32 bits are reserved)
+ LLP contains the pointer to the next LLI for block chaining using linked lists.
+ If LLPis set to 0x0, then transfers using linked lists are not enabled.
+ Address MUST be aligned to a 32-bit boundary.
+ */
+ dmacHw_REG64_t ChannelCtl; /* Control Register. 64 bits */
+ dmacHw_REG64_t ChannelSstat; /* Source Status Register */
+ dmacHw_REG64_t ChannelDstat; /* Destination Status Register */
+ dmacHw_REG64_t ChannelSstatAddr; /* Source Status Address Register */
+ dmacHw_REG64_t ChannelDstatAddr; /* Destination Status Address Register */
+ dmacHw_REG64_t ChannelConfig; /* Channel Configuration Register */
+ dmacHw_REG64_t SrcGather; /* Source gather register */
+ dmacHw_REG64_t DstScatter; /* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t RawTfr; /* Raw Status for IntTfr Interrupt */
+ dmacHw_REG64_t RawBlock; /* Raw Status for IntBlock Interrupt */
+ dmacHw_REG64_t RawSrcTran; /* Raw Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t RawDstTran; /* Raw Status for IntDstTran Interrupt */
+ dmacHw_REG64_t RawErr; /* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+ dmacHw_REG64_t StatusTfr; /* Status for IntTfr Interrupt */
+ dmacHw_REG64_t StatusBlock; /* Status for IntBlock Interrupt */
+ dmacHw_REG64_t StatusSrcTran; /* Status for IntSrcTran Interrupt */
+ dmacHw_REG64_t StatusDstTran; /* Status for IntDstTran Interrupt */
+ dmacHw_REG64_t StatusErr; /* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+ dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */
+ dmacHw_REG64_t MaskBlock; /* Mask for IntBlock Interrupt */
+ dmacHw_REG64_t MaskSrcTran; /* Mask for IntSrcTran Interrupt */
+ dmacHw_REG64_t MaskDstTran; /* Mask for IntDstTran Interrupt */
+ dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+ dmacHw_REG64_t ClearTfr; /* Clear for IntTfr Interrupt */
+ dmacHw_REG64_t ClearBlock; /* Clear for IntBlock Interrupt */
+ dmacHw_REG64_t ClearSrcTran; /* Clear for IntSrcTran Interrupt */
+ dmacHw_REG64_t ClearDstTran; /* Clear for IntDstTran Interrupt */
+ dmacHw_REG64_t ClearErr; /* Clear for IntErr Interrupt */
+ dmacHw_REG64_t StatusInt; /* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+ dmacHw_REG64_t ReqSrcReg; /* Source Software Transaction Request Register */
+ dmacHw_REG64_t ReqDstReg; /* Destination Software Transaction Request Register */
+ dmacHw_REG64_t SglReqSrcReg; /* Single Source Transaction Request Register */
+ dmacHw_REG64_t SglReqDstReg; /* Single Destination Transaction Request Register */
+ dmacHw_REG64_t LstSrcReg; /* Last Source Transaction Request Register */
+ dmacHw_REG64_t LstDstReg; /* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+ dmacHw_REG64_t DmaCfgReg; /* DMA Configuration Register */
+ dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */
+ dmacHw_REG64_t DmaIdReg; /* DMA ID Register */
+ dmacHw_REG64_t DmaTestReg; /* DMA Test Register */
+ dmacHw_REG64_t Reserved0; /* Reserved */
+ dmacHw_REG64_t Reserved1; /* Reserved */
+ dmacHw_REG64_t CompParm6; /* Component Parameter 6 */
+ dmacHw_REG64_t CompParm5; /* Component Parameter 5 */
+ dmacHw_REG64_t CompParm4; /* Component Parameter 4 */
+ dmacHw_REG64_t CompParm3; /* Component Parameter 3 */
+ dmacHw_REG64_t CompParm2; /* Component Parameter 2 */
+ dmacHw_REG64_t CompParm1; /* Component Parameter 1 */
+ dmacHw_REG64_t CompId; /* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel) (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel) (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN 0x00000001 /* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK 0x0000000E /* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT 1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8 0x00000000 /* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16 0x00000002 /* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32 0x00000004 /* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64 0x00000006 /* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK 0x00000070 /* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT 4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8 0x00000000 /* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16 0x00000010 /* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32 0x00000020 /* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64 0x00000030 /* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE 0x00040000 /* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE 0x00020000 /* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK 0x00000180 /* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC 0x00000000 /* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC 0x00000080 /* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC 0x00000100 /* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK 0x00000600 /* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC 0x00000000 /* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC 0x00000200 /* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC 0x00000400 /* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK 0x00003800 /* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0 0x00000000 /* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4 0x00000800 /* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8 0x00001000 /* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16 0x00001800 /* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK 0x0001C000 /* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0 0x00000000 /* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4 0x00004000 /* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8 0x00008000 /* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16 0x0000C000 /* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK 0x00700000 /* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC 0x00000000 /* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC 0x00100000 /* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC 0x00200000 /* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC 0x00300000 /* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI 0x00400000 /* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI 0x00500000 /* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI 0x00600000 /* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI 0x00700000 /* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK 0x01800000 /* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1 0x00000000 /* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2 0x00800000 /* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK 0x06000000 /* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1 0x00000000 /* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2 0x02000000 /* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN 0x08000000 /* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN 0x10000000 /* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK 0x00000FFF /* Block transfer size */
+#define dmacHw_REG_CTL_DONE 0x00001000 /* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT 5 /* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK 0x000000E0 /* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0 0x00000000 /* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1 0x00000020 /* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2 0x00000040 /* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3 0x00000060 /* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4 0x00000080 /* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5 0x000000A0 /* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6 0x000000C0 /* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7 0x000000E0 /* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND 0x00000100 /* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY 0x00000200 /* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS 0x00000400 /* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS 0x00000800 /* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK 0x00003000 /* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA 0x00000000 /* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK 0x00001000 /* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS 0x00002000 /* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE 0x00010000 /* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK 0x0000C000 /* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA 0x00000000 /* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK 0x00004000 /* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS 0x00008000 /* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE 0x00020000 /* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW 0x00040000 /* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW 0x00080000 /* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK 0x3FF00000 /* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC 0x40000000 /* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST 0x80000000 /* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY 0x00000001 /* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH 0x00000002 /* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK 0x0000001C /* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1 0x00000004 /* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2 0x00000008 /* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3 0x00000010 /* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT 0x00000020 /* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT 0x00000040 /* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK 0x00000780 /* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK 0x00007800 /* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS 0x00000700 /* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE 0x00001800 /* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE 0x0000000f /* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH 0x00006000 /* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr) (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr) (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr) (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel) (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel) (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr) (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr) (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl) (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl) (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg) (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect) (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg) (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf) (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf) (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module) (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module) (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 0000000..cfa91be
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/* HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE Default undefined and SS is enabled. */
+/* HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+/* HW_CFG_SDRAM_ADDR_BRC Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/* HW_CFG_SDRAM_CLK_ASYNC Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+ #if (CFG_GLOBAL_CHIP == FPGA11107)
+ #define HW_CFG_BUS_CLK_HZ 5000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 10000000
+ #define HW_CFG_DDR_PHY_OMIT
+ #define HW_CFG_UART_CLK_HZ 7500000
+ #else
+ #define HW_CFG_PLL_VCO_HZ 2000000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ CAP_HW_CFG_ARM_CLK_HZ
+ #define HW_CFG_BUS_CLK_HZ 166666666
+ #define HW_CFG_DDR_CTLR_CLK_HZ 333333333
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 142857142
+ #define HW_CFG_VPM_CLK_HZ CAP_HW_CFG_VPM_CLK_HZ
+ #endif
+#else
+ #define HW_CFG_PLL_VCO_HZ 1800000000
+ #define HW_CFG_PLL2_VCO_HZ 1800000000
+ #define HW_CFG_ARM_CLK_HZ 450000000
+ #define HW_CFG_BUS_CLK_HZ 150000000
+ #define HW_CFG_DDR_CTLR_CLK_HZ 300000000
+ #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+ #define HW_CFG_UART_CLK_HZ 150000000
+ #define HW_CFG_VPM_CLK_HZ 300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 0000000..e01fc46
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file intcHw_reg.h
+*
+* @brief platform specific interrupt controller bit assignments
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC 32 /* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC 3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM 30 /* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM 29 /* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM 28 /* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM 27 /* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM 26 /* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM 25 /* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM 24 /* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM 23 /* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM 22 /* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM 21 /* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM 20 /* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM 19 /* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM 18 /* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM 17 /* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM 16 /* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM 15 /* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM 14 /* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM 13 /* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM 12 /* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM 11 /* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM 10 /* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM 9 /* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM 8 /* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM 7 /* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM 6 /* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM 5 /* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM 4 /* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM 3 /* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM 2 /* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM 1 /* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM 0 /* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3 (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2 (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1 (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0 (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1 (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0 (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1 (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2 (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7 (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6 (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5 (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4 (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3 (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2 (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1 (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0 (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7 (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6 (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5 (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4 (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3 (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2 (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1 (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0 (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM 27 /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM 26 /* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM 26 /* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM 25 /* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM 24 /* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM 23 /* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM 22 /* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM 21 /* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM 20 /* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM 19 /* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM 18 /* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM 17 /* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM 16 /* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM 15 /* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM 14 /* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM 13 /* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM 12 /* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM 11 /* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM 10 /* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM 9 /* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM 8 /* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM 7 /* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM 6 /* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM 5 /* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM 4 /* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM 3 /* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM 2 /* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM 1 /* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM 0 /* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0 (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1 (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1 (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0 (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM 15 /* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM 14 /* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM 13 /* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM 12 /* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM 11 /* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM 10 /* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM 9 /* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM 8 /* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM 7 /* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM 6 /* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM 5 /* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM 4 /* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM 3 /* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM 2 /* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM 1 /* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM 0 /* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3 (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2 (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1 (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0 (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0 (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS 0x00 /* IRQ status register */
+#define INTCHW_FIQSTATUS 0x04 /* FIQ status register */
+#define INTCHW_RAWINTR 0x08 /* Raw Interrupt Status register */
+#define INTCHW_INTSELECT 0x0c /* Interrupt Select Register */
+#define INTCHW_INTENABLE 0x10 /* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR 0x14 /* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT 0x18 /* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR 0x1c /* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION 0x20 /* Protection Enable Register */
+#define INTCHW_SWPRIOMASK 0x24 /* Software Priority Mask Register */
+#define INTCHW_PRIODAISY 0x28 /* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0 0x100 /* Vector Address Registers */
+#define INTCHW_VECTPRIO0 0x200 /* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS 0xf00 /* Vector Address Register 0-31 */
+#define INTCHW_PID 0xfe0 /* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID 0xff0 /* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/* intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/* uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/* uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+ __REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+ __REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 0000000..86bb58d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file mm_addr.h
+*
+* @brief Memory Map address defintions
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/* Memory Map address definitions */
+
+#define MM_ADDR_DDR 0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000 /* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC 0x20000000
+#define MM_ADDR_IO_BROM 0x30000000
+#define MM_ADDR_IO_ARAM 0x30100000 /* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0 0x30200000
+#define MM_ADDR_IO_DMA1 0x30300000
+#define MM_ADDR_IO_ESW 0x30400000
+#define MM_ADDR_IO_CLCD 0x30500000
+#define MM_ADDR_IO_PIF 0x30580000
+#define MM_ADDR_IO_APM 0x30600000
+#define MM_ADDR_IO_SPUM 0x30700000
+#define MM_ADDR_IO_VPM_PROG 0x30800000
+#define MM_ADDR_IO_VPM_DATA 0x30A00000
+#define MM_ADDR_IO_VRAM 0x40000000 /* 64 KB - security block in front of it */
+#define MM_ADDR_IO_CHIPC 0x80000000
+#define MM_ADDR_IO_UMI 0x80001000
+#define MM_ADDR_IO_NAND 0x80001800
+#define MM_ADDR_IO_LEDM 0x80002000
+#define MM_ADDR_IO_PWM 0x80002040
+#define MM_ADDR_IO_VINTC 0x80003000
+#define MM_ADDR_IO_GPIO0 0x80004000
+#define MM_ADDR_IO_GPIO1 0x80004800
+#define MM_ADDR_IO_I2CS 0x80005000
+#define MM_ADDR_IO_SPIS 0x80006000
+#define MM_ADDR_IO_HPM 0x80007400
+#define MM_ADDR_IO_HPM_REMAP 0x80007800
+#define MM_ADDR_IO_TZPC 0x80008000
+#define MM_ADDR_IO_MPU 0x80009000
+#define MM_ADDR_IO_SPUMP 0x8000a000
+#define MM_ADDR_IO_PKA 0x8000b000
+#define MM_ADDR_IO_RNG 0x8000c000
+#define MM_ADDR_IO_KEYC 0x8000d000
+#define MM_ADDR_IO_BBL 0x8000e000
+#define MM_ADDR_IO_OTP 0x8000f000
+#define MM_ADDR_IO_I2S0 0x80010000
+#define MM_ADDR_IO_I2S1 0x80011000
+#define MM_ADDR_IO_UARTA 0x80012000
+#define MM_ADDR_IO_UARTB 0x80013000
+#define MM_ADDR_IO_I2CH 0x80014020
+#define MM_ADDR_IO_SPIH 0x80015000
+#define MM_ADDR_IO_TSC 0x80016000
+#define MM_ADDR_IO_TMR 0x80017000
+#define MM_ADDR_IO_WATCHDOG 0x80017800
+#define MM_ADDR_IO_ETM 0x80018000
+#define MM_ADDR_IO_DDRC 0x80019000
+#define MM_ADDR_IO_SINTC 0x80100000
+#define MM_ADDR_IO_INTC0 0x80200000
+#define MM_ADDR_IO_INTC1 0x80201000
+#define MM_ADDR_IO_GE 0x80300000
+#define MM_ADDR_IO_USB_CTLR0 0x80400000
+#define MM_ADDR_IO_USB_CTLR1 0x80410000
+#define MM_ADDR_IO_USB_PHY 0x80420000
+#define MM_ADDR_IO_SDIOH0 0x80500000
+#define MM_ADDR_IO_SDIOH1 0x80600000
+#define MM_ADDR_IO_VDEC 0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 0000000..de92ec6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file mm_io.h
+*
+* @brief Memory Map I/O definitions
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory. For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+ (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+ ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys) (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt) (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC /* Physical beginning of IO mapped memory */
+#define MM_IO_BASE MM_IO_BASE_FLASHC /* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 0000000..d15f5f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_def.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL 0x00000001
+#define secHw_BLK_MASK_KEY_SCAN 0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN 0x00000004
+#define secHw_BLK_MASK_UART0 0x00000008
+#define secHw_BLK_MASK_UART1 0x00000010
+#define secHw_BLK_MASK_WATCHDOG 0x00000020
+#define secHw_BLK_MASK_SPUM 0x00000040
+#define secHw_BLK_MASK_DDR2 0x00000080
+#define secHw_BLK_MASK_EXT_MEM 0x00000100
+#define secHw_BLK_MASK_ESW 0x00000200
+#define secHw_BLK_MASK_SPU 0x00010000
+#define secHw_BLK_MASK_PKA 0x00020000
+#define secHw_BLK_MASK_RNG 0x00040000
+#define secHw_BLK_MASK_RTC 0x00080000
+#define secHw_BLK_MASK_OTP 0x00100000
+#define secHw_BLK_MASK_BOOT 0x00200000
+#define secHw_BLK_MASK_MPU 0x00400000
+#define secHw_BLK_MASK_TZCTRL 0x00800000
+#define secHw_BLK_MASK_INTR 0x01000000
+
+/* Trustzone register set */
+typedef struct {
+ volatile uint32_t status; /* read only - reflects status of writes of 2 write registers */
+ volatile uint32_t setUnsecure; /* write only. reads back as 0 */
+ volatile uint32_t setSecure; /* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+ secHw_IDX_LS = 0,
+ secHw_IDX_MS = 1,
+ secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+ volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ );
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 0000000..9cd6a03
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file secHw_inline.h
+*
+* @brief Definitions for configuring/testing secure blocks
+*
+* @note
+* None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+ }
+
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */
+ ) {
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ if (mask & 0x0000FFFF) {
+ regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+ }
+ if (mask & 0xFFFF0000) {
+ regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+ secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+ return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 0000000..3080ac7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file tmrHw_reg.h
+*
+* @brief Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one (Timer ID 0) runs at 25 MHz
+Timer two (Timer ID 1) runs at 25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ 25 /* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ 25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ 150 /* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ 150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT (0xFFFFFFFF) /* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT (4) /* Number of timer module supported */
+
+typedef struct {
+ uint32_t LoadValue; /* Load value for timer */
+ uint32_t CurrentValue; /* Current value for timer */
+ uint32_t Control; /* Control register */
+ uint32_t InterruptClear; /* Interrupt clear register */
+ uint32_t RawInterruptStatus; /* Raw interrupt status */
+ uint32_t InterruptStatus; /* Masked interrupt status */
+ uint32_t BackgroundLoad; /* Background load value */
+ uint32_t padding; /* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE 0x00000080
+#define tmrHw_CONTROL_PERIODIC 0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE 0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK 0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1 0x00000000
+#define tmrHw_CONTROL_PRESCALE_16 0x00000004
+#define tmrHw_CONTROL_PRESCALE_256 0x00000008
+#define tmrHw_CONTROL_32BIT 0x00000002
+#define tmrHw_CONTROL_ONESHOT 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING 0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 0000000..847980c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dma.h
+*
+* @brief API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION 1
+
+#define DMA_NUM_CONTROLLERS 2
+#define DMA_NUM_CHANNELS 8 /* per controller */
+
+typedef enum {
+ DMA_DEVICE_MEM_TO_MEM, /* For memory to memory transfers */
+ DMA_DEVICE_I2S0_DEV_TO_MEM,
+ DMA_DEVICE_I2S0_MEM_TO_DEV,
+ DMA_DEVICE_I2S1_DEV_TO_MEM,
+ DMA_DEVICE_I2S1_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+ DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+ DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+ DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM, /* Additional mic input for beam-forming */
+ DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+ DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+ DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+ DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+ DMA_DEVICE_SPUM_DEV_TO_MEM,
+ DMA_DEVICE_SPUM_MEM_TO_DEV,
+ DMA_DEVICE_SPIH_DEV_TO_MEM,
+ DMA_DEVICE_SPIH_MEM_TO_DEV,
+ DMA_DEVICE_UART_A_DEV_TO_MEM,
+ DMA_DEVICE_UART_A_MEM_TO_DEV,
+ DMA_DEVICE_UART_B_DEV_TO_MEM,
+ DMA_DEVICE_UART_B_MEM_TO_DEV,
+ DMA_DEVICE_PIF_MEM_TO_DEV,
+ DMA_DEVICE_PIF_DEV_TO_MEM,
+ DMA_DEVICE_ESW_DEV_TO_MEM,
+ DMA_DEVICE_ESW_MEM_TO_DEV,
+ DMA_DEVICE_VPM_MEM_TO_MEM,
+ DMA_DEVICE_CLCD_MEM_TO_MEM,
+ DMA_DEVICE_NAND_MEM_TO_MEM,
+ DMA_DEVICE_MEM_TO_VRAM,
+ DMA_DEVICE_VRAM_TO_MEM,
+
+ /* Add new entries before this line. */
+
+ DMA_NUM_DEVICE_ENTRIES,
+ DMA_DEVICE_NONE = 0xff, /* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+* The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+* The DMA_DescriptorRing_t contains a ring of descriptors which is used
+* to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+ void *virtAddr; /* Virtual Address of the descriptor ring */
+ dma_addr_t physAddr; /* Physical address of the descriptor ring */
+ int descriptorsAllocated; /* Number of descriptors allocated in the descriptor ring */
+ size_t bytesAllocated; /* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+* DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
+ /* off not being DMA'd. */
+
+typedef enum {
+ DMA_MEM_TYPE_NONE, /* Not a valid setting */
+ DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
+ DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
+ DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
+ DMA_MEM_TYPE_USER, /* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+ void *virtAddr; /* Virtual address used for this segment */
+ dma_addr_t physAddr; /* Physical address this segment maps to */
+ size_t numBytes; /* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+ DMA_MemType_t memType;
+ void *virtAddr;
+ size_t numBytes;
+
+ /* Each region (virtually contiguous) consists of one or more segments. Each */
+ /* segment is virtually and physically contiguous. */
+
+ int numSegmentsUsed;
+ int numSegmentsAllocated;
+ DMA_Segment_t *segment;
+
+ /* When a region corresponds to user memory, we need to lock all of the pages */
+ /* down before we can figure out the physical addresses. The lockedPage array contains */
+ /* the pages that were locked, and which subsequently need to be unlocked once the */
+ /* memory is unmapped. */
+
+ unsigned numLockedPages;
+ struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+ int inUse; /* Is this mapping currently being used? */
+ struct semaphore lock; /* Acquired when using this structure */
+ enum dma_data_direction dir; /* Direction this transfer is intended for */
+
+ /* In the event that we're mapping user memory, we need to know which task */
+ /* the memory is for, so that we can obtain the correct mm locks. */
+
+ struct task_struct *userTask;
+
+ int numRegionsUsed;
+ int numRegionsAllocated;
+ DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+* The DMA_DeviceAttribute_t contains information which describes a
+* particular DMA device (or peripheral).
+*
+* It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+* statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+ void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0 0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1 0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC 0x00000004 /* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST 0x00000008 /* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED 0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR 0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO 0x00000400
+#define DMA_DEVICE_FLAG_IN_USE 0x00000800 /* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/* determine which DMA controllers a given device can be used from, and the interface */
+/* array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+ uint32_t flags; /* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+ uint8_t dedicatedController; /* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+ uint8_t dedicatedChannel; /* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+ const char *name; /* Will show up in the /proc entry */
+
+ uint32_t dmacPort[DMA_NUM_CONTROLLERS]; /* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+ dmacHw_CONFIG_t config; /* Configuration to use when DMA'ing using this device */
+
+ void *userData; /* Passed to the devHandler */
+ DMA_DeviceHandler_t devHandler; /* Called when DMA operations finish. */
+
+ timer_tick_count_t transferStartTime; /* Time the current transfer was started */
+
+ /* The following statistical information will be collected and presented in a proc entry. */
+ /* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+ /* a 64 bit counter. */
+
+ uint64_t numTransfers; /* Number of DMA transfers performed */
+ uint64_t transferTicks; /* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+ uint64_t transferBytes; /* Total bytes transferred */
+ uint32_t timesBlocked; /* Number of times a channel was unavailable */
+ uint32_t numBytes; /* Last transfer size */
+
+ /* It's not possible to free memory which is allocated for the descriptors from within */
+ /* the ISR. So make the presumption that a given device will tend to use the */
+ /* same sized buffers over and over again, and we keep them around. */
+
+ DMA_DescriptorRing_t ring; /* Ring of descriptors allocated for this device */
+
+ /* We stash away some of the information from the previous transfer. If back-to-back */
+ /* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+ /* the descriptor buffers. */
+
+ uint32_t prevNumBytes;
+ dma_addr_t prevSrcData;
+ dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+* DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+* data structures and don't belong in this header file, but are included
+* merely for discussion.
+*
+* By the time this is implemented, these structures will be moved out into
+* the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+* The DMA_Channel_t contains state information about each DMA channel. Some
+* of the channels are dedicated. Non-dedicated channels are shared
+* amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE 0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED 0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR 0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO 0x00000008
+
+typedef struct {
+ uint32_t flags; /* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+ DMA_Device_t devType; /* Device this channel is currently reserved for */
+ DMA_Device_t lastDevType; /* Device type that used this previously */
+ char name[20]; /* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+ const char *fileName; /* Place where channel reservation took place */
+ int lineNum; /* Place where channel reservation took place */
+#endif
+ dmacHw_HANDLE_t dmacHwHandle; /* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+* The DMA_Controller_t contains state information about each DMA controller.
+*
+* The freeChannelQ is stored in the controller data structure rather than
+* the channel data structure since several of the devices are accessible
+* from multiple controllers, and there is no way to know which controller
+* will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+ DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+* The DMA_Global_t contains all of the global state information used by
+* the DMA code.
+*
+* Callers which need to allocate a shared channel will be queued up
+* on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+ struct semaphore lock; /* acquired when manipulating table entries */
+ wait_queue_head_t freeChannelQ;
+
+ DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+* Initializes the DMA module.
+*
+* @return
+* 0 - Success
+* < 0 - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+ int lineNum);
+#define dma_request_channel(dev) dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+* Reserves a channel for use with @a dev. If the device is setup to use
+* a shared channel, then this function will block until a free channel
+* becomes available.
+*
+* @return
+* >= 0 - A valid DMA Handle.
+* -EBUSY - Device is currently being used.
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev /* Device to use with the allocated channel. */
+ );
+#endif
+
+/****************************************************************************/
+/**
+* Frees a previously allocated DMA Handle.
+*
+* @return
+* 0 - DMA Handle was released successfully.
+* -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel /* DMA handle. */
+ );
+
+/****************************************************************************/
+/**
+* Determines if a given device has been configured as using a shared
+* channel.
+*
+* @return boolean
+* 0 Device uses a dedicated channel
+* non-zero Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev /* Device to check. */
+ );
+
+/****************************************************************************/
+/**
+* Allocates memory to hold a descriptor ring. The descriptor ring then
+* needs to be populated by making one or more calls to
+* dna_add_descriptors.
+*
+* The returned descriptor ring will be automatically initialized.
+*
+* @return
+* 0 Descriptor ring was allocated successfully
+* -ENOMEM Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */
+ int numDescriptors /* Number of descriptors that need to be allocated. */
+ );
+
+/****************************************************************************/
+/**
+* Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */
+ );
+
+/****************************************************************************/
+/**
+* Initializes a descriptor ring, so that descriptors can be added to it.
+* Once a descriptor ring has been allocated, it may be reinitialized for
+* use with additional/different regions of memory.
+*
+* Note that if 7 descriptors are allocated, it's perfectly acceptable to
+* initialize the ring with a smaller number of descriptors. The amount
+* of memory allocated for the descriptor ring will not be reduced, and
+* the descriptor ring may be reinitialized later
+*
+* @return
+* 0 Descriptor ring was initialized successfully
+* -ENOMEM The descriptor which was passed in has insufficient space
+* to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */
+ int numDescriptors /* Number of descriptors to initialize. */
+ );
+
+/****************************************************************************/
+/**
+* Determines the number of descriptors which would be required for a
+* transfer of the indicated memory region.
+*
+* This function also needs to know which DMA device this transfer will
+* be destined for, so that the appropriate DMA configuration can be retrieved.
+* DMA parameters such as transfer width, and whether this is a memory-to-memory
+* or memory-to-peripheral, etc can all affect the actual number of descriptors
+* required.
+*
+* @return
+* > 0 Returns the number of descriptors required for the indicated transfer
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Adds a region of memory to the descriptor ring. Note that it may take
+* multiple descriptors for each region of memory. It is the callers
+* responsibility to allocate a sufficiently large descriptor ring.
+*
+* @return
+* 0 Descriptors were added successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */
+ DMA_Device_t device, /* DMA Device that descriptors are for */
+ dma_addr_t srcData, /* Place to get data (memory or device) */
+ dma_addr_t dstData, /* Place to put data (memory or device) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Sets the descriptor ring associated with a device.
+*
+* Once set, the descriptor ring will be associated with the device, even
+* across channel request/free calls. Passing in a NULL descriptor ring
+* will release any descriptor ring currently associated with the device.
+*
+* Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+* the descriptor ring may be released and reallocated.
+*
+* Note: This function will release the descriptor memory for any current
+* descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */
+ );
+
+/****************************************************************************/
+/**
+* Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+ DMA_DescriptorRing_t *ring /* Place to store retrieved ring */
+ );
+
+/****************************************************************************/
+/**
+* Allocates buffers for the descriptors. This is normally done automatically
+* but needs to be done explicitly when initiating a dma from interrupt
+* context.
+*
+* @return
+* 0 Descriptors were allocated successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Allocates and sets up descriptors for a double buffered circular buffer.
+*
+* This is primarily intended to be used for things like the ingress samples
+* from a microphone.
+*
+* @return
+* > 0 Number of descriptors actually allocated.
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+* -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Physical address of source data */
+ dma_addr_t dstData1, /* Physical address of first destination buffer */
+ dma_addr_t dstData2, /* Physical address of second destination buffer */
+ size_t numBytes /* Number of bytes in each destination buffer */
+ );
+
+/****************************************************************************/
+/**
+* Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
+ );
+
+/****************************************************************************/
+/**
+* Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
+ );
+
+/****************************************************************************/
+/**
+* Looks at a memory address and categorizes it.
+*
+* @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+* Sets the process (aka userTask) associated with a mem map. This is
+* required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+ struct task_struct *task)
+{
+ memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+* Looks at a memory address and determines if we support DMA'ing to/from
+* that type of memory.
+*
+* @return boolean -
+* return value != 0 means dma supported
+* return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+* Initializes a memory map for use. Since this function acquires a
+* sempaphore within the memory map, it is VERY important that dma_unmap
+* be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ );
+
+/****************************************************************************/
+/**
+* Adds a segment of memory to a memory map.
+*
+* @return 0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *mem, /* Virtual address that we want to get a map of */
+ size_t numBytes /* Number of bytes being mapped */
+ );
+
+/****************************************************************************/
+/**
+* Creates a descriptor ring from a memory mapping.
+*
+* @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
+ DMA_MemMap_t *memMap, /* Memory map that will be used */
+ dma_addr_t devPhysAddr /* Physical address of device */
+ );
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ void *addr, /* Virtual address that we want to get a map of */
+ size_t count, /* Number of bytes being mapped */
+ enum dma_data_direction dir /* Direction that the mapping will be going */
+ );
+
+/****************************************************************************/
+/**
+* Maps in a memory region such that it can be used for performing a DMA.
+*
+* @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
+ int dirtied /* non-zero if any of the pages were modified */
+ );
+
+/****************************************************************************/
+/**
+* Initiates a transfer when the descriptors have already been setup.
+*
+* This is a special case, and normally, the dma_transfer_xxx functions should
+* be used.
+*
+* @return
+* 0 Transfer was started successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Stops a previously started DMA transfer.
+*
+* @return
+* 0 Transfer was stopped successfully
+* -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Waits for a DMA to complete by polling. This function is only intended
+* to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+* Initiates a DMA transfer
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle, /* DMA Handle */
+ dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */
+ dma_addr_t srcData, /* Place to get data to write to device */
+ dma_addr_t dstData, /* Pointer to device data address */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ );
+
+/****************************************************************************/
+/**
+* Initiates a transfer from memory to a device.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Place to get data to write to device (physical address) */
+ dma_addr_t dstData, /* Pointer to device data address (physical address) */
+ size_t numBytes /* Number of bytes to transfer to the device */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Initiates a transfer from a device to memory.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Pointer to the device data address (physical address) */
+ dma_addr_t dstData, /* Place to store data retrieved from the device (physical address) */
+ size_t numBytes /* Number of bytes to retrieve from the device */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Initiates a memory to memory transfer.
+*
+* @return
+* 0 Transfer was started successfully
+* -EINVAL Invalid device type for this kind of transfer
+* (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle, /* DMA Handle */
+ dma_addr_t srcData, /* Place to transfer data from (physical address) */
+ dma_addr_t dstData, /* Place to transfer data to (physical address) */
+ size_t numBytes /* Number of bytes to transfer */
+ ) {
+ return dma_transfer(handle,
+ dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+ srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+* Set the callback function which will be called when a transfer completes.
+* If a NULL callback function is set, then no callback will occur.
+*
+* @note @a devHandler will be called from IRQ context.
+*
+* @return
+* 0 - Success
+* -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */
+ DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */
+ void *userData /* Pointer which will be passed to devHandler. */
+ );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 0000000..7d393ca
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(MM_IO_BASE_INTC0)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #IRQ_INTC0_START
+ cmp \irqstat, #0
+ bne 1001f
+
+ ldr \base, =(MM_IO_BASE_INTC1)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #IRQ_INTC1_START
+ cmp \irqstat, #0
+ bne 1001f
+
+ ldr \base, =(MM_IO_BASE_SINTC)
+ ldr \irqstat, [\base, #0] @ get status
+ ldr \irqnr, [\base, #0x10] @ mask with enable register
+ ands \irqstat, \irqstat, \irqnr
+ mov \irqnr, #0xffffffff @ code meaning no interrupt bits set
+ cmp \irqstat, #0
+ beq 1002f
+
+ mov \irqnr, #IRQ_SINTC_START @ something is set, so fixup return value
+
+1001:
+ movs \tmp, \irqstat, lsl #16
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+
+ movs \tmp, \irqstat, lsl #8
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #8
+
+ movs \tmp, \irqstat, lsl #4
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #4
+
+ movs \tmp, \irqstat, lsl #2
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #2
+
+ movs \tmp, \irqstat, lsl #1
+ addeq \irqnr, \irqnr, #1
+ orrs \base, \base, #1
+
+1002: @ irqnr will be set to 0xffffffff if no irq bits are set
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro irq_prio_table
+ .endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 0000000..447eb34
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ * This file contains the hardware definitions of the BCMRing.
+ *
+ * Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define RAM_START PHYS_OFFSET
+
+#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE PAGE_OFFSET
+
+#define pcibios_assign_all_busses() 1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name) DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name) extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val) spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val) spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val) {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val) {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 0000000..4db0eff
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c) __raw_readb(c)
+#define readw(c) __raw_readw(c)
+#define readl(c) __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l) __raw_readsb(p, d, l)
+#define readsw(p, d, l) __raw_readsw(p, d, l)
+#define readsl(p, d, l) __raw_readsl(p, d, l)
+
+#define writeb(v, c) __raw_writeb(v, c)
+#define writew(v, c) __raw_writew(v, c)
+#define writel(v, c) __raw_writel(v, c)
+
+#define writesb(p, d, l) __raw_writesb(p, d, l)
+#define writesw(p, d, l) __raw_writesw(p, d, l)
+#define writesl(p, d, l) __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l) _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 0000000..b279b82
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2007 Broadcom
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START 0
+#define IRQ_DMA0C0 0 /* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1 1 /* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2 2 /* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3 3 /* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4 4 /* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5 5 /* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6 6 /* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7 7 /* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0 8 /* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1 9 /* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2 10 /* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3 11 /* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4 12 /* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5 13 /* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6 14 /* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7 15 /* DMA1 channel 7 interrupt */
+#define IRQ_VPM 16 /* Voice process module interrupt */
+#define IRQ_USBHD2 17 /* USB host2/device2 interrupt */
+#define IRQ_USBH1 18 /* USB1 host interrupt */
+#define IRQ_USBD 19 /* USB device interrupt */
+#define IRQ_SDIOH0 20 /* SDIO0 host interrupt */
+#define IRQ_SDIOH1 21 /* SDIO1 host interrupt */
+#define IRQ_TIMER0 22 /* Timer0 interrupt */
+#define IRQ_TIMER1 23 /* Timer1 interrupt */
+#define IRQ_TIMER2 24 /* Timer2 interrupt */
+#define IRQ_TIMER3 25 /* Timer3 interrupt */
+#define IRQ_SPIH 26 /* SPI host interrupt */
+#define IRQ_ESW 27 /* Ethernet switch interrupt */
+#define IRQ_APM 28 /* Audio process module interrupt */
+#define IRQ_GE 29 /* Graphic engine interrupt */
+#define IRQ_CLCD 30 /* LCD Controller interrupt */
+#define IRQ_PIF 31 /* Peripheral interface interrupt */
+#define IRQ_INTC0_END 31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START 32
+#define IRQ_GPIO0 32 /* 0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1 33 /* 1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0 34 /* 2 I2S0 interrupt */
+#define IRQ_I2S1 35 /* 3 I2S1 interrupt */
+#define IRQ_I2CH 36 /* 4 I2C host interrupt */
+#define IRQ_I2CS 37 /* 5 I2C slave interrupt */
+#define IRQ_SPIS 38 /* 6 SPI slave interrupt */
+#define IRQ_GPHY 39 /* 7 Gigabit Phy interrupt */
+#define IRQ_FLASHC 40 /* 8 Flash controller interrupt */
+#define IRQ_COMMTX 41 /* 9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX 42 /* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ 43 /* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB 44 /* 12 UARTB */
+#define IRQ_WATCHDOG 45 /* 13 Watchdog timer interrupt */
+#define IRQ_UARTA 46 /* 14 UARTA */
+#define IRQ_TSC 47 /* 15 Touch screen controller interrupt */
+#define IRQ_KEYC 48 /* 16 Key pad controller interrupt */
+#define IRQ_DMPU 49 /* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU 50 /* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU 51 /* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG 52 /* 20 Random number generator interrupt */
+#define IRQ_RTC0 53 /* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1 54 /* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM 55 /* 23 Secure process module interrupt */
+#define IRQ_VDEC 56 /* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2 57 /* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP 58 /* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END 58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START 59
+#define IRQ_SEC_WATCHDOG 59 /* 0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA 60 /* 1 UARTA interrupt */
+#define IRQ_SEC_TSC 61 /* 2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC 62 /* 3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU 63 /* 4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU 64 /* 5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU 65 /* 6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG 66 /* 7 Random number generator interrupt */
+#define IRQ_SEC_RTC0 67 /* 8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1 68 /* 9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM 69 /* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0 70 /* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1 71 /* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2 72 /* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3 73 /* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2 74 /* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END 74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/* Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/* to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0 100
+
+#define NUM_INTERNAL_IRQS (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS 62
+
+#define NR_IRQS (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK 0xffffffff
+#define IRQ_INTC1_VALID_MASK 0x07ffffff
+#define IRQ_SINTC_VALID_MASK 0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 0000000..114f942
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion. These are
+ * private definitions which should NOT be used outside memory.h
+ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 0000000..ce5cd16
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA (5 << 16) /* Bus turnaround cycle (n) 0-7 (30 ns) */
+#define HW_CFG_NAND_tWP (4 << 11) /* Write pulse width cycle (n+1) 0-31 (25 ns) */
+#define HW_CFG_NAND_tWR (1 << 9) /* Write recovery cycle (n+1) 0-3 (10 ns) */
+#define HW_CFG_NAND_tAS (0 << 7) /* Write address setup cycle (n+1) 0-3 ( 0 ns) */
+#define HW_CFG_NAND_tOE (3 << 5) /* Output enable delay cycle (n) 0-3 (15 ns) */
+#define HW_CFG_NAND_tRC (7 << 0) /* Read access cycle (n+2) 0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+ | HW_CFG_NAND_tWP \
+ | HW_CFG_NAND_tWR \
+ | HW_CFG_NAND_tAS \
+ | HW_CFG_NAND_tOE \
+ | HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19) /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA (0 << 16) /* Bus turnaround cycle (n) (DNA) */
+#define HW_CFG_NOR_TWP (6 << 11) /* Write pulse width cycle (n+1) (35ns) */
+#define HW_CFG_NOR_TWR (0 << 9) /* Write recovery cycle (n+1) (0ns) */
+#define HW_CFG_NOR_TAS (0 << 7) /* Write address setup cycle (n+1) (0ns) */
+#define HW_CFG_NOR_TOE (0 << 5) /* Output enable delay cycle (n) (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC (0x10 << 0) /* Read access cycle / Burst read latency (n+2 / n+1) (100ns) */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+ | HW_CFG_NOR_TBTA \
+ | HW_CFG_NOR_TWP \
+ | HW_CFG_NOR_TWR \
+ | HW_CFG_NOR_TAS \
+ | HW_CFG_NOR_TOE \
+ | HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES 0x10000000 /* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 0000000..cdbf93c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+ printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+ if (mode == 'h') {
+ /* Reboot configured in proc entry */
+ if (bcmring_arch_warm_reboot) {
+ printk("warm reset\n");
+ /* Issue Warm reset (do not reset ethernet switch, keep alive) */
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 0000000..5a94bbb
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+* timer.h
+*
+* PURPOSE:
+*
+*
+*
+* NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+* timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+* timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+* timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+* timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 0000000..40d033e
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ * Integrator architecture timex specifications
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE 100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 0000000..9c9821b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ /* Send out UARTA */
+ while (BCMRING_UART_0_FR & (1 << 5))
+ ;
+
+ BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+ /* Wait for the tx fifo to be empty */
+ while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+ ;
+
+ /* Wait for the final character to be sent on the txd line */
+ while (BCMRING_UART_0_FR & (1 << 3))
+ ;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 0000000..35e2ead
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 0000000..dc1c493
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC0_START),
+ MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC0_START),
+ MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC1_START),
+ MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_INTC1_START),
+ MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_SINTC_START),
+ MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+ writel(1 << (irq - IRQ_SINTC_START),
+ MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+ .typename = "ARM-INTC0",
+ .ack = bcmring_mask_irq0,
+ .mask = bcmring_mask_irq0, /* mask a specific interrupt, blocking its delivery. */
+ .unmask = bcmring_unmask_irq0, /* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+ .typename = "ARM-INTC1",
+ .ack = bcmring_mask_irq1,
+ .mask = bcmring_mask_irq1,
+ .unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+ .typename = "ARM-SINTC",
+ .ack = bcmring_mask_irq2,
+ .mask = bcmring_mask_irq2,
+ .unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+ unsigned int irq_start, unsigned int vic_sources)
+{
+ unsigned int i;
+ for (i = 0; i < 32; i++) {
+ unsigned int irq = irq_start + i;
+ set_irq_chip(irq, chip);
+ set_irq_chip_data(irq, base);
+
+ if (vic_sources & (1 << i)) {
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+ writel(0, base + INTCHW_INTSELECT);
+ writel(0, base + INTCHW_INTENABLE);
+ writel(~0, base + INTCHW_INTENCLEAR);
+ writel(0, base + INTCHW_IRQSTATUS);
+ writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+ vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+ IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+ vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+ IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+ vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+ IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+ /* special cases */
+ if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+ set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+ }
+ if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+ set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+ }
+}
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 0000000..0f1c37e
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+ .length = sz, \
+ .type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+ .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+ .length = sz, \
+ .type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+ IO_DESC(MM_IO_BASE_NAND, SZ_64K), /* phys:0x28000000-0x28000FFF virt:0xE8000000-0xE8000FFF size:0x00010000 */
+ IO_DESC(MM_IO_BASE_UMI, SZ_64K), /* phys:0x2C000000-0x2C000FFF virt:0xEC000000-0xEC000FFF size:0x00010000 */
+
+ IO_DESC(MM_IO_BASE_BROM, SZ_64K), /* phys:0x30000000-0x3000FFFF virt:0xF3000000-0xF300FFFF size:0x00010000 */
+ MEM_DESC(MM_IO_BASE_ARAM, SZ_1M), /* phys:0x31000000-0x31FFFFFF virt:0xF3100000-0xF31FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_DMA0, SZ_1M), /* phys:0x32000000-0x32FFFFFF virt:0xF3200000-0xF32FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_DMA1, SZ_1M), /* phys:0x33000000-0x33FFFFFF virt:0xF3300000-0xF33FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_ESW, SZ_1M), /* phys:0x34000000-0x34FFFFFF virt:0xF3400000-0xF34FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_CLCD, SZ_1M), /* phys:0x35000000-0x35FFFFFF virt:0xF3500000-0xF35FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_APM, SZ_1M), /* phys:0x36000000-0x36FFFFFF virt:0xF3600000-0xF36FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_SPUM, SZ_1M), /* phys:0x37000000-0x37FFFFFF virt:0xF3700000-0xF37FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M), /* phys:0x38000000-0x38FFFFFF virt:0xF3800000-0xF38FFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M), /* phys:0x3A000000-0x3AFFFFFF virt:0xF3A00000-0xF3AFFFFF size:0x01000000 */
+
+ IO_DESC(MM_IO_BASE_VRAM, SZ_64K), /* phys:0x40000000-0x4000FFFF virt:0xF4000000-0xF400FFFF size:0x00010000 */
+ IO_DESC(MM_IO_BASE_CHIPC, SZ_16M), /* phys:0x80000000-0x80FFFFFF virt:0xF8000000-0xF8FFFFFF size:0x01000000 */
+ IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+ SZ_16M), /* phys:0x0F000000-0x0FFFFFFF virt:0xF0000000-0xF0FFFFFF size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+ iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 0000000..2d415d2
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+ return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+ return tmrHw_GetCurrentCount(PROF_TIMER); /* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+ static int tickRateMsec;
+
+ if (tickRateMsec == 0) {
+ tickRateMsec = timer_get_tick_rate() / 1000;
+ }
+
+ return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+ return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0..caf6d51 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data adssphere_flash_data = {
.width = 4,
};
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c163..3dd0e2a 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,48 +22,39 @@
#include <mach/hardware.h>
-/*
- * The EP93xx has two external crystal oscillators. To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks. The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE 14745600
-#define EP93XX_EXT_RTC_RATE 32768
-
-
struct clk {
unsigned long rate;
int users;
int sw_locked;
- u32 enable_reg;
+ void __iomem *enable_reg;
u32 enable_mask;
unsigned long (*get_rate)(struct clk *clk);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
};
static unsigned long get_uart_rate(struct clk *clk);
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
static struct clk clk_uart1 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
.sw_locked = 1,
- .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
- .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .enable_reg = EP93XX_SYSCON_DEVCFG,
+ .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
.get_rate = get_uart_rate,
};
static struct clk clk_pll1;
@@ -75,6 +66,15 @@
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
+static struct clk clk_keypad = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
+ .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+ .set_rate = set_keytchclk_rate,
+};
+static struct clk clk_pwm = {
+ .rate = EP93XX_EXT_CLK_RATE,
+};
/* DMA Clocks */
static struct clk clk_m2p0 = {
@@ -130,27 +130,29 @@
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart1),
- INIT_CK("apb:uart2", NULL, &clk_uart2),
- INIT_CK("apb:uart3", NULL, &clk_uart3),
- INIT_CK(NULL, "pll1", &clk_pll1),
- INIT_CK(NULL, "fclk", &clk_f),
- INIT_CK(NULL, "hclk", &clk_h),
- INIT_CK(NULL, "pclk", &clk_p),
- INIT_CK(NULL, "pll2", &clk_pll2),
- INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
- INIT_CK(NULL, "m2p0", &clk_m2p0),
- INIT_CK(NULL, "m2p1", &clk_m2p1),
- INIT_CK(NULL, "m2p2", &clk_m2p2),
- INIT_CK(NULL, "m2p3", &clk_m2p3),
- INIT_CK(NULL, "m2p4", &clk_m2p4),
- INIT_CK(NULL, "m2p5", &clk_m2p5),
- INIT_CK(NULL, "m2p6", &clk_m2p6),
- INIT_CK(NULL, "m2p7", &clk_m2p7),
- INIT_CK(NULL, "m2p8", &clk_m2p8),
- INIT_CK(NULL, "m2p9", &clk_m2p9),
- INIT_CK(NULL, "m2m0", &clk_m2m0),
- INIT_CK(NULL, "m2m1", &clk_m2m1),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
+ INIT_CK(NULL, "pll1", &clk_pll1),
+ INIT_CK(NULL, "fclk", &clk_f),
+ INIT_CK(NULL, "hclk", &clk_h),
+ INIT_CK(NULL, "pclk", &clk_p),
+ INIT_CK(NULL, "pll2", &clk_pll2),
+ INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
+ INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
+ INIT_CK(NULL, "pwm_clk", &clk_pwm),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+ INIT_CK(NULL, "m2p3", &clk_m2p3),
+ INIT_CK(NULL, "m2p4", &clk_m2p4),
+ INIT_CK(NULL, "m2p5", &clk_m2p5),
+ INIT_CK(NULL, "m2p6", &clk_m2p6),
+ INIT_CK(NULL, "m2p7", &clk_m2p7),
+ INIT_CK(NULL, "m2p8", &clk_m2p8),
+ INIT_CK(NULL, "m2p9", &clk_m2p9),
+ INIT_CK(NULL, "m2m0", &clk_m2m0),
+ INIT_CK(NULL, "m2m1", &clk_m2m1),
};
@@ -160,9 +162,11 @@
u32 value;
value = __raw_readl(clk->enable_reg);
+ value |= clk->enable_mask;
if (clk->sw_locked)
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(value | clk->enable_mask, clk->enable_reg);
+ ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+ else
+ __raw_writel(value, clk->enable_reg);
}
return 0;
@@ -175,9 +179,11 @@
u32 value;
value = __raw_readl(clk->enable_reg);
+ value &= ~clk->enable_mask;
if (clk->sw_locked)
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+ ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+ else
+ __raw_writel(value, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
@@ -202,6 +208,43 @@
}
EXPORT_SYMBOL(clk_get_rate);
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val;
+ u32 div_bit;
+
+ val = __raw_readl(clk->enable_reg);
+
+ /*
+ * The Key Matrix and ADC clocks are configured using the same
+ * System Controller register. The clock used will be either
+ * 1/4 or 1/16 the external clock rate depending on the
+ * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+ * bit being set or cleared.
+ */
+ div_bit = clk->enable_mask >> 15;
+
+ if (rate == EP93XX_KEYTCHCLK_DIV4)
+ val |= div_bit;
+ else if (rate == EP93XX_KEYTCHCLK_DIV16)
+ val &= ~div_bit;
+ else
+ return -EINVAL;
+
+ ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk->set_rate)
+ return clk->set_rate(clk, rate);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5c..16b92c3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,24 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
#include <linux/dma-mapping.h>
-#include <linux/time.h>
#include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <asm/hardware/vic.h>
@@ -98,7 +82,7 @@
*/
static unsigned int last_jiffy_time;
-#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
@@ -362,8 +346,8 @@
{
int gpio_irq;
- vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
- vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -385,6 +369,47 @@
/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, reg);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&syscon_swlock, flags);
+
+ val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+ val |= set_bits;
+ val &= ~clear_bits;
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+ spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
+/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
#define EP93XX_UART_MCR_OFFSET (0x0100)
@@ -517,10 +542,8 @@
void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
{
- if (copy_addr) {
- memcpy(data->dev_addr,
- (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
- }
+ if (copy_addr)
+ memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
ep93xx_eth_data = *data;
platform_device_register(&ep93xx_eth_device);
@@ -546,19 +569,125 @@
platform_device_register(&ep93xx_i2c_device);
}
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+ {
+ .name = "platform:grled",
+ .gpio = EP93XX_GPIO_LINE_GRLED,
+ }, {
+ .name = "platform:rdled",
+ .gpio = EP93XX_GPIO_LINE_RDLED,
+ },
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+ .num_leds = ARRAY_SIZE(ep93xx_led_pins),
+ .leds = ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ep93xx_led_data,
+ },
+};
+
+
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+ {
+ .start = EP93XX_PWM_PHYS_BASE,
+ .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+ .name = "ep93xx-pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
+ .resource = ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+ {
+ .start = EP93XX_PWM_PHYS_BASE + 0x20,
+ .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+ .name = "ep93xx-pwm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
+ .resource = ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+ if (pwm0)
+ platform_device_register(&ep93xx_pwm0_device);
+
+ /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+ if (pwm1)
+ platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+
+ if (pdev->id == 0) {
+ err = 0;
+ } else if (pdev->id == 1) {
+ err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+ err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+ if (err)
+ goto fail;
+
+ /* PWM 1 output on EGPIO[14] */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ } else {
+ err = -ENODEV;
+ }
+
+ return err;
+
+fail:
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+ if (pdev->id == 1) {
+ gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+ gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+ /* EGPIO[14] used for GPIO */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+ }
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
{
- unsigned int v;
-
- /*
- * Disallow access to MaverickCrunch initially.
- */
- v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+ /* Disallow access to MaverickCrunch initially */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
ep93xx_gpio_init();
@@ -568,4 +697,5 @@
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
+ platform_device_register(&ep93xx_leds);
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b9..73145ae 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data edb93xx_flash_data;
static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500..3da7ca8 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
static struct physmap_flash_data gesbc9312_flash_data = {
.width = 4,
};
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d..1ea8871 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,16 @@
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
struct ep93xx_gpio_chip {
struct gpio_chip chip;
- unsigned int data_reg;
- unsigned int data_dir_reg;
+ void __iomem *data_reg;
+ void __iomem *data_dir_reg;
};
#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
@@ -111,15 +112,61 @@
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
u8 data_reg, data_dir_reg;
- int i;
+ int gpio, i;
data_reg = __raw_readb(ep93xx_chip->data_reg);
data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
- for (i = 0; i < chip->ngpio; i++)
- seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
- (data_reg & (1 << i)) ? "set" : "clear",
- (data_dir_reg & (1 << i)) ? "out" : "in");
+ gpio = ep93xx_chip->chip.base;
+ for (i = 0; i < chip->ngpio; i++, gpio++) {
+ int is_out = data_dir_reg & (1 << i);
+
+ seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+ chip->label, i, gpio,
+ gpiochip_is_requested(chip, i) ? : "",
+ is_out ? "out" : "in ",
+ (data_reg & (1 << i)) ? "hi" : "lo");
+
+ if (!is_out) {
+ int irq = gpio_to_irq(gpio);
+ struct irq_desc *desc = irq_desc + irq;
+
+ if (irq >= 0 && desc->action) {
+ char *trigger;
+
+ switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_NONE:
+ trigger = "(default)";
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trigger = "edge-falling";
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ trigger = "edge-rising";
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trigger = "edge-both";
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trigger = "level-high";
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trigger = "level-low";
+ break;
+ default:
+ trigger = "?trigger?";
+ break;
+ }
+
+ seq_printf(s, " irq-%d %s%s",
+ irq, trigger,
+ (desc->status & IRQ_WAKEUP)
+ ? " wakeup" : "");
+ }
+ }
+
+ seq_printf(s, "\n");
+ }
}
#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079..ea78e90 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
+#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
+#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
/* AHB peripherals */
-#define EP93XX_DMA_BASE ((void __iomem *) \
- (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
-#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
-#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
-#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
-#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
-#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
-#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
-#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
/* APB peripherals */
-#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
-#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
-#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,33 @@
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
-#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
-#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
-#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
-#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
-#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
-#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
@@ -172,14 +176,45 @@
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
-#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297..349fa7c 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,12 +4,23 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
#define pcibios_assign_all_busses() 0
-#include "platform.h"
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
-#include "ts72xx.h"
+#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16)
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081..cebcc1c 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
/*
* arch/arm/mach-ep93xx/include/mach/io.h
*/
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) __typesafe_io(p)
-#define __mem_pci(p) (p)
+#define __io(p) __typesafe_io(p)
+#define __mem_pci(p) (p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p) p
+#else
+#define IOMEM(p) ((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f..5f5fa65 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
#ifndef __ASSEMBLY__
struct i2c_board_info;
+struct platform_device;
struct ep93xx_eth_data
{
@@ -15,8 +16,27 @@
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+ ep93xx_devcfg_set_clear(0x00, bits);
+}
+
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e..6d661fe 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@
static inline void arch_reset(char mode, const char *cmd)
{
- u32 devicecfg;
-
local_irq_disable();
- devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+ /*
+ * Set then clear the SWRST bit to initiate a software reset
+ */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
while (1)
;
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 4117344..3bd934e 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -67,7 +67,6 @@
#ifndef __ASSEMBLY__
-#include <linux/io.h>
static inline int board_is_ts7200(void)
{
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815..0a313e8 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
static struct ep93xx_eth_data micro9_eth_data = {
.phy_id = 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index aaf1371..259f782 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <linux/m48t86.h>
#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
#include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
static struct map_desc ts72xx_io_desc[] __initdata = {
{
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319..d795642 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
+#ifdef CONFIG_MMU
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE)
+#else
+#define IO_ADDRESS(x) (x)
+#endif
#define pcibios_assign_all_busses() 1
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055..2a318eb 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
#define INTCP_PA_CLCD_BASE 0xc0000000
-#define INTCP_VA_CIC_BASE 0xf1000040
-#define INTCP_VA_PIC_BASE 0xf1400000
-#define INTCP_VA_SIC_BASE 0xfca00000
+#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE IO_ADDRESS(0xca000000)
#define INTCP_PA_ETH_BASE 0xc8000000
#define INTCP_ETH_SIZE 0x10
-#define INTCP_VA_CTRL_BASE 0xfcb00000
+#define INTCP_VA_CTRL_BASE IO_ADDRESS(0xcb000000)
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
@@ -121,12 +121,12 @@
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = 0xfca00000,
+ .virtual = IO_ADDRESS(0xca000000),
.pfn = __phys_to_pfn(0xca000000),
.length = SZ_4K,
.type = MT_DEVICE
}, {
- .virtual = 0xfcb00000,
+ .virtual = IO_ADDRESS(0xcb000000),
.pfn = __phys_to_pfn(0xcb000000),
.length = SZ_4K,
.type = MT_DEVICE
@@ -394,8 +394,8 @@
*/
static unsigned int mmc_status(struct device *dev)
{
- unsigned int status = readl(0xfca00004);
- writel(8, 0xfcb00008);
+ unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+ writel(8, IO_ADDRESS(0xcb000000) + 8);
return status & 8;
}
@@ -403,6 +403,8 @@
static struct mmc_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
};
static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1e93dfe..5083f03 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -416,6 +416,7 @@
};
unsigned long ixp4xx_timer_freq = FREQ;
+EXPORT_SYMBOL(ixp4xx_timer_freq);
static int __init ixp4xx_clocksource_init(void)
{
clocksource_ixp4xx.mult =
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7..0aca451 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@
Say 'Y' here if you want your kernel to support the
QNAP TS-119 and TS-219 Turbo NAS devices.
+config MACH_OPENRD_BASE
+ bool "Marvell OpenRD Base Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Base Board.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e..80ab0ec 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f69198..0acb61f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+ if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+ rev == MV88F6281_REV_A1))
return 200000000;
return 166666667;
@@ -872,6 +873,8 @@
return "MV88F6281-Z0";
else if (rev == MV88F6281_REV_A0)
return "MV88F6281-A0";
+ else if (rev == MV88F6281_REV_A1)
+ return "MV88F6281-A1";
else
return "MV88F6281-Rev-Unsupported";
} else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858..54c1327 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
#define MV88F6281_DEV_ID 0x6281
#define MV88F6281_REV_Z0 0
#define MV88F6281_REV_A0 2
+#define MV88F6281_REV_A1 3
#define MV88F6192_DEV_ID 0x6192
#define MV88F6192_REV_Z0 0
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 0000000..947dfb8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data openrd_base_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+ .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+ MPP29_GPIO,
+ 0
+};
+
+static void __init openrd_base_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(openrd_base_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&openrd_base_ge00_data);
+ kirkwood_sata_init(&openrd_base_sata_data);
+ kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_base_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 01aa213..ec1a64f 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -206,6 +206,15 @@
}
+static int __init ts219_pci_init(void)
+{
+ if (machine_is_ts219())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(ts219_pci_init);
+
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306..d1b5885 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/list.h>
#include <linux/math64.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <asm/clkdev.h>
+
#include <mach/clock.h>
#include <mach/hardware.h>
#include <mach/common.h>
@@ -94,7 +97,6 @@
}
static struct clk clk16m = {
- .name = "CLK16M",
.get_rate = clk16m_get_rate,
.enable = _clk_enable,
.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@
}
static struct clk clk32 = {
- .name = "CLK32",
.get_rate = clk32_get_rate,
};
@@ -121,7 +122,6 @@
}
static struct clk clk32_premult = {
- .name = "CLK32_premultiplier",
.parent = &clk32,
.get_rate = clk32_premult_get_rate,
};
@@ -156,7 +156,6 @@
}
static struct clk prem_clk = {
- .name = "prem_clk",
.set_parent = prem_clk_set_parent,
};
@@ -167,7 +166,6 @@
}
static struct clk system_clk = {
- .name = "system_clk",
.parent = &prem_clk,
.get_rate = system_clk_get_rate,
};
@@ -179,7 +177,6 @@
}
static struct clk mcu_clk = {
- .name = "mcu_clk",
.parent = &clk32_premult,
.get_rate = mcu_clk_get_rate,
};
@@ -195,7 +192,6 @@
}
static struct clk fclk = {
- .name = "fclk",
.parent = &mcu_clk,
.get_rate = fclk_get_rate,
};
@@ -238,7 +234,6 @@
}
static struct clk hclk = {
- .name = "hclk",
.parent = &system_clk,
.get_rate = hclk_get_rate,
.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@
}
static struct clk clk48m = {
- .name = "CLK48M",
.parent = &system_clk,
.get_rate = clk48m_get_rate,
.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@
static struct clk perclk[] = {
{
- .name = "perclk",
.id = 0,
.parent = &system_clk,
.get_rate = perclk1_get_rate,
.round_rate = perclk1_round_rate,
.set_rate = perclk1_set_rate,
}, {
- .name = "perclk",
.id = 1,
.parent = &system_clk,
.get_rate = perclk2_get_rate,
.round_rate = perclk2_round_rate,
.set_rate = perclk2_set_rate,
}, {
- .name = "perclk",
.id = 2,
.parent = &system_clk,
.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@
}
static struct clk clko_clk = {
- .name = "clko_clk",
.set_parent = clko_set_parent,
};
static struct clk dma_clk = {
- .name = "dma",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@
};
static struct clk csi_clk = {
- .name = "csi_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@
};
static struct clk mma_clk = {
- .name = "mma_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@
};
static struct clk usbd_clk = {
- .name = "usbd_clk",
.parent = &clk48m,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@
};
static struct clk gpt_clk = {
- .name = "gpt_clk",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk uart_clk = {
- .name = "uart",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk i2c_clk = {
- .name = "i2c_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk spi_clk = {
- .name = "spi_clk",
.parent = &perclk[1],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk sdhc_clk = {
- .name = "sdhc_clk",
.parent = &perclk[1],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk lcdc_clk = {
- .name = "lcdc_clk",
.parent = &perclk[1],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk mshc_clk = {
- .name = "mshc_clk",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk ssi_clk = {
- .name = "ssi_clk",
.parent = &perclk[2],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
};
static struct clk rtc_clk = {
- .name = "rtc_clk",
.parent = &clk32,
};
-static struct clk *mxc_clks[] = {
- &clk16m,
- &clk32,
- &clk32_premult,
- &prem_clk,
- &system_clk,
- &mcu_clk,
- &fclk,
- &hclk,
- &clk48m,
- &perclk[0],
- &perclk[1],
- &perclk[2],
- &clko_clk,
- &dma_clk,
- &csi_clk,
- &mma_clk,
- &usbd_clk,
- &gpt_clk,
- &uart_clk,
- &i2c_clk,
- &spi_clk,
- &sdhc_clk,
- &lcdc_clk,
- &mshc_clk,
- &ssi_clk,
- &rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "dma", dma_clk)
+ _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+ _REGISTER_CLOCK(NULL, "mma", mma_clk)
+ _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+ _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+ _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+ _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
};
int __init mx1_clocks_init(unsigned long fref)
{
- struct clk **clkp;
unsigned int reg;
+ int i;
/* disable clocks we are able to */
__raw_writel(0, SCM_GCCR);
@@ -620,13 +592,13 @@
reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
clko_clk.parent = (struct clk *)clko_clocks[reg];
- for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
- clk_register(*clkp);
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
clk_enable(&hclk);
clk_enable(&fclk);
- mxc_timer_init(&gpt_clk);
+ mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb..b6be29d 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
#include "devices.h"
static struct resource imx_csi_resources[] = {
- [0] = {
+ {
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = CSI_INT,
.end = CSI_INT,
.flags = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@
};
static struct resource imx_i2c_resources[] = {
- [0] = {
+ {
.start = 0x00217000,
.end = 0x00217010,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = I2C_INT,
.end = I2C_INT,
.flags = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@
};
static struct resource imx_uart1_resources[] = {
- [0] = {
+ {
.start = UART1_BASE_ADDR,
.end = UART1_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = UART1_MINT_RX,
.end = UART1_MINT_RX,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = UART1_MINT_TX,
.end = UART1_MINT_TX,
.flags = IORESOURCE_IRQ,
- },
- [3] = {
+ }, {
.start = UART1_MINT_RTS,
.end = UART1_MINT_RTS,
.flags = IORESOURCE_IRQ,
@@ -105,22 +100,19 @@
};
static struct resource imx_uart2_resources[] = {
- [0] = {
+ {
.start = UART2_BASE_ADDR,
.end = UART2_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = UART2_MINT_RX,
.end = UART2_MINT_RX,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = UART2_MINT_TX,
.end = UART2_MINT_TX,
.flags = IORESOURCE_IRQ,
- },
- [3] = {
+ }, {
.start = UART2_MINT_RTS,
.end = UART2_MINT_RTS,
.flags = IORESOURCE_IRQ,
@@ -135,17 +127,15 @@
};
static struct resource imx_rtc_resources[] = {
- [0] = {
+ {
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = RTC_INT,
.end = RTC_INT,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = RTC_SAMINT,
.end = RTC_SAMINT,
.flags = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@
};
static struct resource imx_wdt_resources[] = {
- [0] = {
+ {
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = WDT_INT,
.end = WDT_INT,
.flags = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@
};
static struct resource imx_usb_resources[] = {
- [0] = {
+ {
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = USBD_INT0,
.end = USBD_INT0,
.flags = IORESOURCE_IRQ,
- },
- [2] = {
+ }, {
.start = USBD_INT1,
.end = USBD_INT1,
.flags = IORESOURCE_IRQ,
- },
- [3] = {
+ }, {
.start = USBD_INT2,
.end = USBD_INT2,
.flags = IORESOURCE_IRQ,
- },
- [4] = {
+ }, {
.start = USBD_INT3,
.end = USBD_INT3,
.flags = IORESOURCE_IRQ,
- },
- [5] = {
+ }, {
.start = USBD_INT4,
.end = USBD_INT4,
.flags = IORESOURCE_IRQ,
- },
- [6] = {
+ }, {
.start = USBD_INT5,
.end = USBD_INT5,
.flags = IORESOURCE_IRQ,
- },
- [7] = {
+ }, {
.start = USBD_INT6,
.end = USBD_INT6,
.flags = IORESOURCE_IRQ,
@@ -231,29 +213,26 @@
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
- [0] = {
+ {
.chip.label = "gpio-0",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
.irq = GPIO_INT_PORTA,
- .virtual_irq_start = MXC_GPIO_IRQ_START
- },
- [1] = {
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ }, {
.chip.label = "gpio-1",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.irq = GPIO_INT_PORTB,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32
- },
- [2] = {
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ }, {
.chip.label = "gpio-2",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.irq = GPIO_INT_PORTC,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64
- },
- [3] = {
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ }, {
.chip.label = "gpio-3",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.irq = GPIO_INT_PORTD,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b..7f9fc10 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,13 @@
void __init mx1_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX1);
+ mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
+
+void __init mx1_init_irq(void)
+{
+ mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a..30f04e5 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@
static struct i2c_board_info mx1ads_i2c_devices[] = {
{
- I2C_BOARD_INFO("pcf857x", 0x22),
- .type = "pcf8575",
+ I2C_BOARD_INFO("pcf8575", 0x22),
.platform_data = &pcf857x_data[0],
}, {
- I2C_BOARD_INFO("pcf857x", 0x24),
- .type = "pcf8575",
+ I2C_BOARD_INFO("pcf8575", 0x24),
.platform_data = &pcf857x_data[1],
},
};
@@ -151,7 +149,7 @@
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
@@ -161,7 +159,7 @@
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5b..325d98d 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@
* to gain access to address latch registers and the data path.
*/
static struct resource dm9000x_resources[] = {
- [0] = {
+ {
.name = "address area",
.start = IMX_CS5_PHYS,
.end = IMX_CS5_PHYS + 1,
- .flags = IORESOURCE_MEM /* address access */
- },
- [1] = {
+ .flags = IORESOURCE_MEM, /* address access */
+ }, {
.name = "data area",
.start = IMX_CS5_PHYS + 4,
.end = IMX_CS5_PHYS + 5,
- .flags = IORESOURCE_MEM /* data access */
- },
- [2] = {
+ .flags = IORESOURCE_MEM, /* data access */
+ }, {
.start = IRQ_GPIOC(3),
.end = IRQ_GPIOC(3),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -154,7 +152,7 @@
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
.map_io = mx1_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx1_init_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
MACHINE_END
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da58..c8a2eac 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,34 @@
endchoice
+config MACH_EUKREA_CPUIMX27
+ bool "Eukrea CPUIMX27 module"
+ depends on MACH_MX27
+ help
+ Include support for Eukrea CPUIMX27 platform. This includes
+ specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+ bool "CPUIMX27 integrates SDHC2 module"
+ depends on MACH_EUKREA_CPUIMX27
+ help
+ This adds support for the internal SDHC2 used on CPUIMX27 used
+ for wifi or eMMC.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX27
+ default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+ prompt "Eukrea MBIMX27 development board"
+ bool
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMX27 evaluation board.
+
+endchoice
+
config MACH_MX27_3DS
bool "MX27PDK platform"
depends on MACH_MX27
@@ -67,4 +95,11 @@
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
+config MACH_PCA100
+ bool "Phytec phyCARD-s (pca100)"
+ depends on MACH_MX27
+ help
+ Include support for phyCARD-s (aka pca100) platform. This
+ includes specific configurations for the module and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca..19560f0 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,7 @@
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb8..eede798 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@
clk_enable(&uart_clk[0]);
#endif
- mxc_timer_init(&gpt_clk[0]);
+ mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
return 0;
}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c97144..4089951 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@
_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
- _REGISTER_CLOCK(NULL, "usb", usb_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
@@ -748,7 +755,7 @@
clk_enable(&uart1_clk);
#endif
- mxc_timer_init(&gpt1_clk);
+ mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
return 0;
}
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b36..50199af 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -40,45 +40,87 @@
#include "devices.h"
/*
- * Resource definition for the MXC IrDA
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
*/
-static struct resource mxc_irda_resources[] = {
- [0] = {
- .start = UART3_BASE_ADDR,
- .end = UART3_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MXC_INT_UART3,
- .end = MXC_INT_UART3,
- .flags = IORESOURCE_IRQ,
+static struct resource mxc_spi_resources0[] = {
+ {
+ .start = CSPI1_BASE_ADDR,
+ .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI1,
+ .end = MXC_INT_CSPI1,
+ .flags = IORESOURCE_IRQ,
},
};
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
- .name = "mxc_irda",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_irda_resources),
- .resource = mxc_irda_resources,
+static struct resource mxc_spi_resources1[] = {
+ {
+ .start = CSPI2_BASE_ADDR,
+ .end = CSPI2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI2,
+ .end = MXC_INT_CSPI2,
+ .flags = IORESOURCE_IRQ,
+ },
};
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+ {
+ .start = CSPI3_BASE_ADDR,
+ .end = CSPI3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI3,
+ .end = MXC_INT_CSPI3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources0),
+ .resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources1),
+ .resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+ .name = "spi_imx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources2),
+ .resource = mxc_spi_resources2,
+};
+#endif
+
/*
* General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
*/
/* We use gpt0 as system timer, so do not add a device for this one */
static struct resource timer1_resources[] = {
- [0] = {
+ {
.start = GPT2_BASE_ADDR,
.end = GPT2_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT2,
.end = MXC_INT_GPT2,
.flags = IORESOURCE_IRQ,
@@ -89,16 +131,15 @@
.name = "imx_gpt",
.id = 1,
.num_resources = ARRAY_SIZE(timer1_resources),
- .resource = timer1_resources
+ .resource = timer1_resources,
};
static struct resource timer2_resources[] = {
- [0] = {
+ {
.start = GPT3_BASE_ADDR,
.end = GPT3_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT3,
.end = MXC_INT_GPT3,
.flags = IORESOURCE_IRQ,
@@ -109,17 +150,16 @@
.name = "imx_gpt",
.id = 2,
.num_resources = ARRAY_SIZE(timer2_resources),
- .resource = timer2_resources
+ .resource = timer2_resources,
};
#ifdef CONFIG_MACH_MX27
static struct resource timer3_resources[] = {
- [0] = {
+ {
.start = GPT4_BASE_ADDR,
.end = GPT4_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT4,
.end = MXC_INT_GPT4,
.flags = IORESOURCE_IRQ,
@@ -130,16 +170,15 @@
.name = "imx_gpt",
.id = 3,
.num_resources = ARRAY_SIZE(timer3_resources),
- .resource = timer3_resources
+ .resource = timer3_resources,
};
static struct resource timer4_resources[] = {
- [0] = {
+ {
.start = GPT5_BASE_ADDR,
.end = GPT5_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT5,
.end = MXC_INT_GPT5,
.flags = IORESOURCE_IRQ,
@@ -150,16 +189,15 @@
.name = "imx_gpt",
.id = 4,
.num_resources = ARRAY_SIZE(timer4_resources),
- .resource = timer4_resources
+ .resource = timer4_resources,
};
static struct resource timer5_resources[] = {
- [0] = {
+ {
.start = GPT6_BASE_ADDR,
.end = GPT6_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_GPT6,
.end = MXC_INT_GPT6,
.flags = IORESOURCE_IRQ,
@@ -170,7 +208,7 @@
.name = "imx_gpt",
.id = 5,
.num_resources = ARRAY_SIZE(timer5_resources),
- .resource = timer5_resources
+ .resource = timer5_resources,
};
#endif
@@ -214,11 +252,11 @@
{
.start = NFC_BASE_ADDR,
.end = NFC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_NANDFC,
.end = MXC_INT_NANDFC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -240,8 +278,7 @@
.start = LCDC_BASE_ADDR,
.end = LCDC_BASE_ADDR + 0xFFF,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_LCDC,
.end = MXC_INT_LCDC,
.flags = IORESOURCE_IRQ,
@@ -264,11 +301,11 @@
{
.start = FEC_BASE_ADDR,
.end = FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_FEC,
.end = MXC_INT_FEC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -281,15 +318,14 @@
#endif
static struct resource mxc_i2c_1_resources[] = {
- [0] = {
+ {
.start = I2C_BASE_ADDR,
.end = I2C_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_I2C,
.end = MXC_INT_I2C,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
}
};
@@ -297,20 +333,19 @@
.name = "imx-i2c",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
- .resource = mxc_i2c_1_resources
+ .resource = mxc_i2c_1_resources,
};
#ifdef CONFIG_MACH_MX27
static struct resource mxc_i2c_2_resources[] = {
- [0] = {
+ {
.start = I2C2_BASE_ADDR,
.end = I2C2_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_I2C2,
.end = MXC_INT_I2C2,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
}
};
@@ -318,17 +353,16 @@
.name = "imx-i2c",
.id = 1,
.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
- .resource = mxc_i2c_2_resources
+ .resource = mxc_i2c_2_resources,
};
#endif
static struct resource mxc_pwm_resources[] = {
- [0] = {
+ {
.start = PWM_BASE_ADDR,
.end = PWM_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- [1] = {
+ .flags = IORESOURCE_MEM,
+ }, {
.start = MXC_INT_PWM,
.end = MXC_INT_PWM,
.flags = IORESOURCE_IRQ,
@@ -339,28 +373,26 @@
.name = "mxc_pwm",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_pwm_resources),
- .resource = mxc_pwm_resources
+ .resource = mxc_pwm_resources,
};
/*
* Resource definition for the MXC SDHC
*/
static struct resource mxc_sdhc1_resources[] = {
- [0] = {
- .start = SDHC1_BASE_ADDR,
- .end = SDHC1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MXC_INT_SDHC1,
- .end = MXC_INT_SDHC1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DMA_REQ_SDHC1,
- .end = DMA_REQ_SDHC1,
- .flags = IORESOURCE_DMA
- },
+ {
+ .start = SDHC1_BASE_ADDR,
+ .end = SDHC1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_SDHC1,
+ .end = MXC_INT_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = DMA_REQ_SDHC1,
+ .end = DMA_REQ_SDHC1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -377,21 +409,19 @@
};
static struct resource mxc_sdhc2_resources[] = {
- [0] = {
- .start = SDHC2_BASE_ADDR,
- .end = SDHC2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MXC_INT_SDHC2,
- .end = MXC_INT_SDHC2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DMA_REQ_SDHC2,
- .end = DMA_REQ_SDHC2,
- .flags = IORESOURCE_DMA
- },
+ {
+ .start = SDHC2_BASE_ADDR,
+ .end = SDHC2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_SDHC2,
+ .end = MXC_INT_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = DMA_REQ_SDHC2,
+ .end = DMA_REQ_SDHC2,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -407,35 +437,123 @@
.resource = mxc_sdhc2_resources,
};
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+ {
+ .start = OTG_BASE_ADDR,
+ .end = OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB3,
+ .end = MXC_INT_USB3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &otg_dmamask,
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+ {
+ .start = OTG_BASE_ADDR + 0x200,
+ .end = OTG_BASE_ADDR + 0x3ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB1,
+ .end = MXC_INT_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1 = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh1_dmamask,
+ },
+ .resource = mxc_usbh1_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+ {
+ .start = OTG_BASE_ADDR + 0x400,
+ .end = OTG_BASE_ADDR + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB2,
+ .end = MXC_INT_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh2 = {
+ .name = "mxc-ehci",
+ .id = 2,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh2_dmamask,
+ },
+ .resource = mxc_usbh2_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
- [0] = {
+ {
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
.base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
- },
- [1] = {
+ }, {
.chip.label = "gpio-1",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- },
- [2] = {
+ }, {
.chip.label = "gpio-2",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- },
- [3] = {
+ }, {
.chip.label = "gpio-3",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- },
- [4] = {
+ }, {
.chip.label = "gpio-4",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
- },
- [5] = {
+ }, {
.chip.label = "gpio-5",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005b..d315406 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@
extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
@@ -20,3 +19,11 @@
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 0000000..7b18760
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C1 */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SDHC2 */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ /* Quad UART's IRQ */
+ GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+ .width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc3ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &eukrea_cpuimx27_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &eukrea_cpuimx27_nor_mtd_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+ .irq = IRQ_GPIOB(23),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+ .irq = IRQ_GPIOB(22),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+ .irq = IRQ_GPIOB(27),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+ .irq = IRQ_GPIOB(30),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ }
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+ mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+ ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+ mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+ i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+ ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+ /* SDHC2 can be used for Wifi */
+ mxc_register_device(&mxc_sdhc_device1, NULL);
+ /* in which case UART4 is also used for Bluetooth */
+ mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+ eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+ .init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = eukrea_cpuimx27_init,
+ .timer = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 0000000..7382b6d
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* SPI1 */
+ PD28_PF_CSPI1_SS0,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = GPIO_PORTF | 16,
+ },
+ {
+ .name = "led2",
+ .default_trigger = "none",
+ .active_low = 1,
+ .gpio = GPIO_PORTF | 19,
+ },
+ {
+ .name = "backlight",
+ .default_trigger = "backlight",
+ .active_low = 0,
+ .gpio = GPIO_PORTE | 5,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+ {
+ .mode = {
+ .name = "CMO-QGVA",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 156000,
+ .hsync_len = 30,
+ .left_margin = 38,
+ .right_margin = 20,
+ .vsync_len = 3,
+ .upper_margin = 15,
+ .lower_margin = 4,
+ },
+ .pcr = 0xFAD08B80,
+ .bpp = 16,
+ },
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+ .mode = eukrea_mbimx27_modes,
+ .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .irq = IRQ_GPIOD(25),
+ .platform_data = &ads7846_config,
+ .mode = SPI_MODE_2,
+ },
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+ .chipselect = eukrea_mbimx27_spi_cs,
+ .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+ &leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+ mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+ ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+ mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ /* SPI and ADS7846 Touchscreen controler init */
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+ mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+ spi_register_board_info(eukrea_mbimx27_spi_board_info,
+ ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+ ads7846_dev_init();
+#endif
+
+ /* Leds configuration */
+ mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+ /* Backlight */
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f..ae8f759 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@
void __init mx21_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
@@ -79,7 +80,18 @@
void __init mx27_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX27);
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+void __init mx27_init_irq(void)
+{
+ mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+ mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461..cf5f77c 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DB02
*/
+static struct imx_fb_videomode mx21ads_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ },
+ .pcr = 0xfb108bc7,
+ .bpp = 16,
+ },
+};
+
static struct imx_fb_platform_data mx21ads_fb_data = {
- .pixclock = 188679, /* in ps */
- .xres = 240,
- .yres = 320,
+ .mode = mx21ads_modes,
+ .num_modes = ARRAY_SIZE(mx21ads_modes),
- .bpp = 16,
- .hsync_len = 2,
- .left_margin = 6,
- .right_margin = 16,
-
- .vsync_len = 1,
- .upper_margin = 8,
- .lower_margin = 10,
- .fixed_screen_cpu = 0,
-
- .pcr = 0xFB108BC7,
- .pwmr = 0x00A901ff,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020008,
+ .pwmr = 0x00a903ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
.init = mx21ads_fb_init,
.exit = mx21ads_fb_exit,
@@ -280,7 +288,7 @@
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx21ads_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx21_init_irq,
.init_machine = mx21ads_board_init,
.timer = &mx21ads_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02dadda..83e412b 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@
__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
+static struct imx_fb_videomode mx27ads_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ },
+ .bpp = 16,
+ .pcr = 0xFB008BC0,
+ },
+};
+
static struct imx_fb_platform_data mx27ads_fb_data = {
- .pixclock = 188679,
- .xres = 240,
- .yres = 320,
-
- .bpp = 16,
- .hsync_len = 1,
- .left_margin = 9,
- .right_margin = 16,
-
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- .fixed_screen_cpu = 0,
+ .mode = mx27ads_modes,
+ .num_modes = ARRAY_SIZE(mx27ads_modes),
/*
* - HSYNC active high
@@ -207,7 +216,6 @@
* - data enable low active
* - enable sharp mode
*/
- .pcr = 0xFB008BC0,
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
@@ -330,7 +338,7 @@
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27ads_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = mx27ads_board_init,
.timer = &mx27ads_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb..82ea227 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = mx27lite_init,
.timer = &mx27lite_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c..6761d1b 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = mx27pdk_init,
.timer = &mx27pdk_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 0000000..fe5b165
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* SDHC */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* onboard I2C */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* external I2C */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_w1_master_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563"
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ .type = "lm75"
+ }
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+ .name = "at25320an",
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+ {
+ .modalias = "at25",
+ .max_speed_hz = 30000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &at25320,
+ },
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+ .chipselect = pca100_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "imx-mmc-detect", data);
+ if (ret)
+ printk(KERN_ERR
+ "pca100: Failed to reuest irq for sd/mmc detection\n");
+
+ return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .init = pca100_sdhc2_init,
+ .exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+ int ret;
+
+ ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+ ARRAY_SIZE(pca100_pins), "PCA100");
+ if (ret)
+ printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+ mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pca100_i2c_devices,
+ ARRAY_SIZE(pca100_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+ /* GPIO0_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+ /* GPIO1_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+ /* GPIO2_IRQ */
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ spi_register_board_info(pca100_spi_board_info,
+ ARRAY_SIZE(pca100_spi_board_info));
+ mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+ .init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = pca100_init,
+ .timer = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d0..ee65dda 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@
};
static struct i2c_board_info pcm038_i2c_devices[] = {
- [0] = {
+ {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
- },
- [1] = {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
- },
- [2] = {
+ }, {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }, {
I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
}
};
@@ -220,6 +216,9 @@
mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+ /* PE18 for user-LED D40 */
+ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -241,7 +240,7 @@
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = pcm038_init,
.timer = &pcm038_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf5..c261f59 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
#include <asm/mach/arch.h>
@@ -125,40 +126,96 @@
.exit = pcm970_sdhc2_exit,
};
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
+static struct imx_fb_videomode pcm970_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 7,
+ .left_margin = 5,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ },
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xF00080C0,
+ .bpp = 16,
+ }, {
+ .mode = {
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ },
+ /*
+ * - HSYNC active low (1 << 22)
+ * - VSYNC active low (1 << 23)
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+ .bpp = 32,
+ },
+};
+
static struct imx_fb_platform_data pcm038_fb_data = {
- .pixclock = 188679, /* in ps (5.3MHz) */
- .xres = 240,
- .yres = 320,
+ .mode = pcm970_modes,
+ .num_modes = ARRAY_SIZE(pcm970_modes),
- .bpp = 16,
- .hsync_len = 7,
- .left_margin = 5,
- .right_margin = 16,
-
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- .fixed_screen_cpu = 0,
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock not inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pcr = 0xFA0080C0,
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
+static struct resource pcm970_sja1000_resources[] = {
+ {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIOE(19),
+ .end = IRQ_GPIOE(19),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+ .clock = 16000000 / 2,
+ .ocr = 0x40 | 0x18,
+ .cdr = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+ .name = "sja1000_platform",
+ .dev = {
+ .platform_data = &pcm970_sja1000_platform_data,
+ },
+ .resource = pcm970_sja1000_resources,
+ .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
/*
* system init for baseboard usage. Will be called by pcm038 init.
*
@@ -172,4 +229,5 @@
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+ platform_device_register(&pcm970_sja1000);
}
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 0000000..cc28f56
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+ select ARCH_MXC_IOMUX_V3
+ bool "Support MX25PDK (3DS) Platform"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 0000000..fe23836
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,3 @@
+obj-y := mm.o devices.o
+obj-$(CONFIG_ARCH_MX25) += clock.o
+obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 0000000..e1dd366
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 0000000..ef26951
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL 0x00
+#define CCM_UPCTL 0x04
+#define CCM_CCTL 0x08
+#define CCM_CGCR0 0x0C
+#define CCM_CGCR1 0x10
+#define CCM_CGCR2 0x14
+#define CCM_PCDR0 0x18
+#define CCM_PCDR1 0x1C
+#define CCM_PCDR2 0x20
+#define CCM_PCDR3 0x24
+#define CCM_RCSR 0x28
+#define CCM_CRDR 0x2C
+#define CCM_DCVR0 0x30
+#define CCM_DCVR1 0x34
+#define CCM_DCVR2 0x38
+#define CCM_DCVR3 0x3c
+#define CCM_LTR0 0x40
+#define CCM_LTR1 0x44
+#define CCM_LTR2 0x48
+#define CCM_LTR3 0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+ ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+ ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+ unsigned long rate = get_rate_mpll();
+
+ if (cctl & (1 << 14))
+ rate = (rate * 3) >> 1;
+
+ return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+ return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+ return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+ unsigned long ofs = (per & 0x3) * 8;
+ unsigned long reg = per & ~0x3;
+ unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+ unsigned long fref;
+
+ if (readl(CRM_BASE + 0x64) & (1 << per))
+ fref = get_rate_upll();
+ else
+ fref = get_rate_ipg(NULL);
+
+ return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+ return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+ return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+ return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+ return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = CRM_BASE + er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = clk_cgcr_enable, \
+ .disable = clk_cgcr_disable, \
+ }
+
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+ _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+ _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+ _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+ _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+ _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 0000000..eb12de1
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+ {
+ .start = 0x43f90000,
+ .end = 0x43f93fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 45,
+ .end = 45,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = 0x43f94000,
+ .end = 0x43f97fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 32,
+ .end = 32,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = 0x5000c000,
+ .end = 0x5000ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 18,
+ .end = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+ {
+ .start = 0x50008000,
+ .end = 0x5000bfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 5,
+ .end = 5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device3 = {
+ .name = "imx-uart",
+ .id = 3,
+ .resource = uart3,
+ .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+ {
+ .start = 0x5002c000,
+ .end = 0x5002ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 40,
+ .end = 40,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device4 = {
+ .name = "imx-uart",
+ .id = 4,
+ .resource = uart4,
+ .num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+ {
+ .start = MX25_OTG_BASE_ADDR,
+ .end = MX25_OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 37,
+ .end = 37,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_otg = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &otg_dmamask,
+ },
+ .resource = mxc_otg_resources,
+ .num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = mxc_otg_resources,
+ .num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+ {
+ .start = MX25_OTG_BASE_ADDR + 0x400,
+ .end = MX25_OTG_BASE_ADDR + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh2 = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh2_dmamask,
+ },
+ .resource = mxc_usbh2_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+ {
+ .start = 0x43fa4000,
+ .end = 0x43fa7fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_spi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources0),
+ .resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+ {
+ .start = 0x50010000,
+ .end = 0x50013fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 13,
+ .end = 13,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_spi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources1),
+ .resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+ {
+ .start = 0x50004000,
+ .end = 0x50007fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_spi_device2 = {
+ .name = "spi_imx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_spi_resources2),
+ .resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+ {
+ .start = 0x53fe0000,
+ .end = 0x53fe3fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 26,
+ .end = 26,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device0 = {
+ .name = "mxc_pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+ .resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+ {
+ .start = 0x53fa0000,
+ .end = 0x53fa3fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 36,
+ .end = 36,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device1 = {
+ .name = "mxc_pwm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+ .resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+ {
+ .start = 0x53fa8000,
+ .end = 0x53fabfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 41,
+ .end = 41,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device2 = {
+ .name = "mxc_pwm",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+ .resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+ {
+ .start = 0x43fa8000,
+ .end = 0x43fabfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 24,
+ .end = 24,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_keypad_device = {
+ .name = "mxc-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mxc_keypad_resources),
+ .resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+ {
+ .start = 0x53fc8000,
+ .end = 0x53fcbfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 42,
+ .end = 42,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device3 = {
+ .name = "mxc_pwm",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+ .resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+ {
+ .start = 0x43f80000,
+ .end = 0x43f83fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_i2c_device0 = {
+ .name = "imx-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+ .resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+ {
+ .start = 0x43f98000,
+ .end = 0x43f9bfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 4,
+ .end = 4,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_i2c_device1 = {
+ .name = "imx-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+ .resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+ {
+ .start = 0x43f84000,
+ .end = 0x43f87fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 10,
+ .end = 10,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_i2c_device2 = {
+ .name = "imx-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+ .resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+ {
+ .chip.label = "gpio-0",
+ .base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+ .irq = 52,
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ }, {
+ .chip.label = "gpio-1",
+ .base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+ .irq = 51,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ }, {
+ .chip.label = "gpio-2",
+ .base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+ .irq = 16,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ }, {
+ .chip.label = "gpio-3",
+ .base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+ .irq = 23,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+ }
+};
+
+int __init mxc_register_gpios(void)
+{
+ return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 0000000..fe6bf88
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 0000000..a7e587f
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+ {
+ .virtual = MX25_AVIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+ .length = MX25_AVIC_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = MX25_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+ .length = MX25_AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = MX25_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+ .length = MX25_AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX25);
+ mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+ mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 0000000..92aa4fd
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_usbh2, NULL);
+ mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+ mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+ .init = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX25_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx25_map_io,
+ .init_irq = mx25_init_irq,
+ .init_machine = mx25pdk_init,
+ .timer = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index ee331fd..776c0ee 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -352,7 +352,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.timer = &armadillo5x0_timer,
.init_machine = armadillo5x0_init,
MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83..fe5c421 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@
return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
}
+static unsigned long get_rate_otg(struct clk *clk)
+{
+ unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+ unsigned long rate;
+
+ if (pdr4 & (1 << 9))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
static unsigned long get_rate_ipg_per(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@
DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL);
DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL);
DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL);
DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL);
DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
@@ -456,7 +472,7 @@
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
- mxc_timer_init(&gpt_clk);
+ mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239..06bd618 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
#include <mach/clock.h>
#include <mach/hardware.h>
+#include <mach/mx31.h>
#include <mach/common.h>
#include "crm_regs.h"
@@ -402,6 +403,11 @@
return ckih_rate;
}
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
static struct clk ckih_clk = {
.get_rate = clk_ckih_get_rate,
};
@@ -508,6 +514,7 @@
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -518,9 +525,9 @@
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
- _REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
- _REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
@@ -531,6 +538,12 @@
_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
@@ -559,6 +572,7 @@
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+ _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)
@@ -609,7 +623,7 @@
__raw_writel(reg, MXC_CCM_PMCR1);
}
- mxc_timer_init(&ipg_clk);
+ mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08..8a577f3 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
- [0] = {
+ {
.chip.label = "gpio-0",
.base = IO_ADDRESS(GPIO1_BASE_ADDR),
.irq = MXC_INT_GPIO1,
.virtual_irq_start = MXC_GPIO_IRQ_START,
- },
- [1] = {
+ }, {
.chip.label = "gpio-1",
.base = IO_ADDRESS(GPIO2_BASE_ADDR),
.irq = MXC_INT_GPIO2,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- },
- [2] = {
+ }, {
.chip.label = "gpio-2",
.base = IO_ADDRESS(GPIO3_BASE_ADDR),
.irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@
{
.start = 0, /* runtime dependent */
.end = 0,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_NANDFC,
.end = MXC_INT_NANDFC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -193,8 +191,7 @@
.start = I2C_BASE_ADDR,
.end = I2C_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_I2C,
.end = MXC_INT_I2C,
.flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@
.start = I2C2_BASE_ADDR,
.end = I2C2_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_I2C2,
.end = MXC_INT_I2C2,
.flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@
.start = I2C3_BASE_ADDR,
.end = I2C3_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
- },
- {
+ }, {
.start = MXC_INT_I2C3,
.end = MXC_INT_I2C3,
.flags = IORESOURCE_IRQ,
@@ -371,8 +366,8 @@
static struct resource otg_resources[] = {
{
- .start = OTG_BASE_ADDR,
- .end = OTG_BASE_ADDR + 0x1ff,
+ .start = MX31_OTG_BASE_ADDR,
+ .end = MX31_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB3,
@@ -395,16 +390,142 @@
.num_resources = ARRAY_SIZE(otg_resources),
};
+/* OTG host */
+struct platform_device mxc_otg_host = {
+ .name = "mxc-ehci",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &otg_dmamask,
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+ {
+ .start = MX31_OTG_BASE_ADDR + 0x200,
+ .end = MX31_OTG_BASE_ADDR + 0x3ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB1,
+ .end = MXC_INT_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh1 = {
+ .name = "mxc-ehci",
+ .id = 1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh1_dmamask,
+ },
+ .resource = mxc_usbh1_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+ {
+ .start = MX31_OTG_BASE_ADDR + 0x400,
+ .end = MX31_OTG_BASE_ADDR + 0x5ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB2,
+ .end = MXC_INT_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_usbh2 = {
+ .name = "mxc-ehci",
+ .id = 2,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &usbh2_dmamask,
+ },
+ .resource = mxc_usbh2_resources,
+ .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+ {
+ .start = CSPI1_BASE_ADDR,
+ .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI1,
+ .end = MXC_INT_CSPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource imx_spi_1_resources[] = {
+ {
+ .start = CSPI2_BASE_ADDR,
+ .end = CSPI2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI2,
+ .end = MXC_INT_CSPI2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource imx_spi_2_resources[] = {
+ {
+ .start = CSPI3_BASE_ADDR,
+ .end = CSPI3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSPI3,
+ .end = MXC_INT_CSPI3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device imx_spi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_spi_0_resources),
+ .resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(imx_spi_1_resources),
+ .resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+ .name = "spi_imx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(imx_spi_2_resources),
+ .resource = imx_spi_2_resources,
+};
+
#ifdef CONFIG_ARCH_MX35
static struct resource mxc_fec_resources[] = {
{
.start = MXC_FEC_BASE_ADDR,
.end = MXC_FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_FEC,
.end = MXC_INT_FEC,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
},
};
@@ -426,6 +547,14 @@
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+ otg_resources[0].start = MX35_OTG_BASE_ADDR;
+ otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+ otg_resources[1].start = MXC_INT_USBOTG;
+ otg_resources[1].end = MXC_INT_USBOTG;
+ mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+ mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+ mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+ mxc_usbh1_resources[1].end = MXC_INT_USBHS;
}
return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494d..79f2be4 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,11 @@
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd4..ad5a112 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
#include <mach/common.h>
#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
/*!
* @file mm.c
@@ -75,6 +76,7 @@
void __init mx31_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
@@ -82,10 +84,22 @@
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+ mx31_init_irq();
+}
+
#ifdef CONFIG_CACHE_L2X0
static int mxc_init_l2x0(void)
{
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767..0497c15 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@
static void __init mx31ads_init_irq(void)
{
- mxc_init_irq();
+ mx31_init_irq();
mx31ads_init_expio();
}
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f16..4230251 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mx31lilly_board_init,
.timer = &mx31lilly_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70f..a8d57de 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@
};
static struct resource smsc911x_resources[] = {
- [0] = {
+ {
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
.end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
.flags = IORESOURCE_IRQ,
@@ -162,7 +161,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31lite_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index b48581e..5592cdb 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -40,18 +39,6 @@
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
};
static struct imxuart_platform_data uart_pdata = {
@@ -111,33 +98,6 @@
.exit = devboard_sdhc2_exit,
};
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
-
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
-}
-
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
@@ -151,7 +111,4 @@
mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
- devboard_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 901fb01..2bfaffb 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -48,18 +47,8 @@
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
MX31_PIN_TXD2__GPIO1_28,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
+ /* dsPIC resets */
+ MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,31 +104,20 @@
.exit = marxbot_sdhc2_exit,
};
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5)
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void marxbot_usbotg_init(void)
+static void dspics_resets_init(void)
{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+ if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+ gpio_direction_output(TRSLAT_RST_B, 1);
+ gpio_export(TRSLAT_RST_B, false);
+ }
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
+ if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+ gpio_direction_output(DSPICS_RST_B, 1);
+ gpio_export(DSPICS_RST_B, false);
+ }
}
/*
@@ -152,8 +130,7 @@
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
"marxbot");
- mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+ dspics_resets_init();
- marxbot_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2a2da47..9243de5 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,9 +16,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/delay.h>
+#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -36,6 +39,7 @@
#include <mach/iomux-mx3.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
+#include <mach/mx31.h>
#include "devices.h"
@@ -55,6 +59,26 @@
MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+ /* USB reset */
+ MX31_PIN_GPIO1_0__GPIO1_0,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+ /* LEDs */
+ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+ MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static struct physmap_flash_data mx31moboard_flash_data = {
@@ -142,8 +166,109 @@
.exit = moboard_sdhc1_exit,
};
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+ gpio_request(USB_RESET_B, "usb-reset");
+ gpio_direction_output(USB_RESET_B, 0);
+ mdelay(1);
+ gpio_set_value(USB_RESET_B, 1);
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static struct gpio_led mx31moboard_leds[] = {
+ {
+ .name = "coreboard-led-0:red:running",
+ .default_trigger = "heartbeat",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+ }, {
+ .name = "coreboard-led-1:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
+ }, {
+ .name = "coreboard-led-2:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
+ }, {
+ .name = "coreboard-led-3:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+ },
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+ .num_leds = ARRAY_SIZE(mx31moboard_leds),
+ .leds = mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mx31moboard_led_pdata,
+ },
+};
+
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
+ &mx31moboard_leds_device,
};
static int mx31moboard_baseboard;
@@ -162,11 +287,18 @@
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mx31moboard_init_sel_gpios();
+
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+ usb_xcvr_reset();
+
+ moboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@@ -197,7 +329,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d..0f7a2f0 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374..6ff186e 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
.timer = &mx35pdk_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 840cfda3..6cbaabe 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -32,6 +32,7 @@
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
#include <media/soc_camera.h>
@@ -169,6 +170,8 @@
MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ /* GPIO */
+ IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
};
static struct physmap_flash_data pcm037_flash_data = {
@@ -244,12 +247,11 @@
};
static struct resource smsc911x_resources[] = {
- [0] = {
+ {
.start = CS1_BASE_ADDR + 0x300,
.end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
.end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -339,8 +341,7 @@
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
+ I2C_BOARD_INFO("pcf8563", 0x51),
}
};
@@ -515,6 +516,33 @@
.num_modes = ARRAY_SIZE(fb_modedb),
};
+static struct resource pcm970_sja1000_resources[] = {
+ {
+ .start = CS5_BASE_ADDR,
+ .end = CS5_BASE_ADDR + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+ .clock = 16000000 / 2,
+ .ocr = 0x40 | 0x18,
+ .cdr = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+ .name = "sja1000_platform",
+ .dev = {
+ .platform_data = &pcm970_sja1000_platform_data,
+ },
+ .resource = pcm970_sja1000_resources,
+ .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
/*
* Board specific initialization.
*/
@@ -575,6 +603,8 @@
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
+
+ platform_device_register(&pcm970_sja1000);
}
static void __init pcm037_timer_init(void)
@@ -592,7 +622,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c32..e18a224 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
+ I2C_BOARD_INFO("pcf8563", 0x51),
}
};
#endif
@@ -203,7 +202,8 @@
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+ /* gpio */
+ MX35_PAD_ATA_CS0__GPIO2_6,
};
/*
@@ -245,7 +245,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm043_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4..044511f 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@
}
static struct resource dnet_resources[] = {
- [0] = {
+ {
.name = "dnet-memory",
.start = QONG_DNET_BASEADDR,
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
- },
- [1] = {
+ }, {
.start = QONG_FPGA_IRQ,
.end = QONG_FPGA_IRQ,
.flags = IORESOURCE_IRQ,
@@ -280,7 +279,7 @@
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
MACHINE_END
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 0000000..8e5fa38
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+ bool "Support Motorola Zn5 GSM phone"
+ default n
+ help
+ Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 0000000..011d5e1
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y := mm.o clock.o devices.o system.o iomux.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 0000000..9939a19
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x90008000
+params_phys-y := 0x90000100
+initrd_phys-y := 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 0000000..ecfa37f
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+ crm_small_divider(base, \
+ base ## _ ## name ## _OFFSET, \
+ base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+ crm_divider(base, \
+ base ## _ ## name ## _OFFSET, \
+ base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+ crm_divider(base, \
+ base ## _ ## name ## _OFFSET, \
+ base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+ static const u32 crm_small_dividers[] = {
+ 2, 3, 4, 5, 6, 8, 10, 12
+ };
+ u8 idx;
+
+ idx = (__raw_readl(reg) & mask) >> offset;
+ if (idx > 7)
+ return 1;
+
+ return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+ u32 div;
+ div = (__raw_readl(reg) & mask) >> offset;
+ return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 0x7 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(0x7 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+ return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+ .get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+ return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+ .get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+ switch (sel) {
+ case 0:
+ return &mcu_pll_clk;
+ case 1:
+ return &dsp_pll_clk;
+ case 2:
+ return &usb_pll_clk;
+ }
+ BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+ if (clk == &mcu_pll_clk)
+ return MXC_PLL0_BASE;
+ else if (clk == &dsp_pll_clk)
+ return MXC_PLL1_BASE;
+ else if (clk == &usb_pll_clk)
+ return MXC_PLL2_BASE;
+ BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+ const void __iomem *pllbase;
+ unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+ long mfn, mfn_abs, mfd, pdf;
+ s64 temp;
+ pllbase = pll_base(clk);
+
+ pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+ if (mfn < 0)
+ mfn_abs = -mfn;
+ else
+ mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+ ref_clk = clk_get_rate(&ckih_clk);
+
+ ref_clk *= 2;
+ ref_clk /= pdf + 1;
+
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd);
+ if (mfn < 0)
+ temp = -temp;
+ temp += ref_clk * mfi;
+
+ return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+ void __iomem *ctl;
+ u32 reg;
+
+ ctl = pll_base(clk);
+ reg = __raw_readl(ctl);
+ reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+ __raw_writel(reg, ctl);
+ do {
+ reg = __raw_readl(ctl);
+ } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+ return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+ void __iomem *ctl;
+ u32 reg;
+
+ ctl = pll_base(clk);
+ reg = __raw_readl(ctl);
+ reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+ __raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+ u32 ascsr, acsr;
+ u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+ ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+ acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+ /* 0 for ckih, 1 for ckih*2 */
+ ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+ /* reg divider */
+ ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+ /* undocumented, 1 for disabling divider */
+ ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+ /* 0 for pat_ref, 1 for divider out */
+ acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+ if (acs & !ads)
+ /* use divided clock */
+ return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+ return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+ u32 acsr, ascsr;
+
+ acsr = __raw_readl(MXC_CRMAP_ACSR);
+ ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+ if (acsr & MXC_CRMAP_ACSR_ACS) {
+ u8 sel;
+ sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+ MXC_CRMAP_ASCSR_APSEL_OFFSET;
+ return clk_get_rate(pll_clk(sel)) /
+ CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+ }
+ return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+ .get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+ u32 acsr, ascsr;
+
+ acsr = __raw_readl(MXC_CRMAP_ACSR);
+ ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+ if (acsr & MXC_CRMAP_ACSR_ACS) {
+ u8 sel;
+ sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+ MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+ return pll_clk(sel);
+ }
+ return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) /
+ CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+ .enable_reg = MXC_CRMAP_ACDER2,
+ .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+ .get_rate = clk_usb_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) /
+ CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+ .parent = &ap_pre_dfs_clk,
+ .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+ .parent = &ap_pre_dfs_clk,
+ .get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+ u32 acder2;
+
+ acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+ if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+ return 2 * clk_get_rate(clk->parent);
+
+ return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+ .parent = &ckih_clk,
+ .get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+ u32 div;
+
+ switch (clk->id) {
+ case 0:
+ case 1:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+ break;
+ case 2:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+ break;
+ default:
+ BUG();
+ }
+ return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+ {
+ .id = 0,
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CRMAP_APRA,
+ .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+ .get_rate = clk_uart_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+ }, {
+ .id = 1,
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CRMAP_APRA,
+ .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+ .get_rate = clk_uart_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+ }, {
+ .id = 2,
+ .parent = &perclk_clk,
+ .enable_reg = MXC_CRMAP_APRA,
+ .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+ .get_rate = clk_uart_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+ },
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) /
+ CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+ .parent = &ahb_clk,
+ .enable_reg = MXC_CRMAP_ACDER2,
+ .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+ .get_rate = clk_nfc_get_rate,
+ .enable = _clk_1bit_enable,
+ .disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+ u32 aprb;
+ u8 sel;
+ u32 mask;
+ int offset;
+
+ aprb = __raw_readl(MXC_CRMAP_APRB);
+
+ switch (clk->id) {
+ case 0:
+ mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+ offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+ break;
+ case 1:
+ mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+ offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+ break;
+ default:
+ BUG();
+ }
+ sel = (aprb & mask) >> offset;
+
+ switch (sel) {
+ case 0:
+ return &ckih_clk;
+ case 1:
+ return &ckih_x2_clk;
+ }
+ return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+ u32 div;
+
+ switch (clk->id) {
+ case 0:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+ break;
+ case 1:
+ div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+ break;
+ default:
+ BUG();
+ }
+
+ return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+ u32 amlpmre1, aprb;
+
+ amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+ aprb = __raw_readl(MXC_CRMAP_APRB);
+ switch (clk->id) {
+ case 0:
+ amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+ aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+ break;
+ case 1:
+ amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+ aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+ break;
+ }
+ __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+ __raw_writel(aprb, MXC_CRMAP_APRB);
+ return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+ u32 amlpmre1, aprb;
+
+ amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+ aprb = __raw_readl(MXC_CRMAP_APRB);
+ switch (clk->id) {
+ case 0:
+ amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+ aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+ break;
+ case 1:
+ amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+ aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+ break;
+ }
+ __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+ __raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+ {
+ .id = 0,
+ .get_rate = clk_sdhc_get_rate,
+ .enable = clk_sdhc_enable,
+ .disable = clk_sdhc_disable,
+ }, {
+ .id = 1,
+ .get_rate = clk_sdhc_get_rate,
+ .enable = clk_sdhc_enable,
+ .disable = clk_sdhc_disable,
+ },
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRD,
+ .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRD,
+ .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ },
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRC,
+ .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRE2,
+ .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable_reg = MXC_CRMAP_AMLPMRE1,
+ .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+ .enable = _clk_3bit_enable,
+ .disable = _clk_3bit_disable,
+ },
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+ _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+ void __iomem *gpt_base;
+ int i;
+
+ ckih_rate = fref;
+
+ usb_clk.parent = clk_usb_parent(&usb_clk);
+ sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+ sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+ mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 0000000..ce4f590
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ 32768
+
+#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK 0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0
+#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS 0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3
+#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4
+#define MXC_CRMAP_ASCSR_APISEL 0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0
+#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET 24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17
+#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET 16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET 8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET 0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET 8
+#define MXC_CRMAP_ACSR_ADS (0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS 0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET 8
+#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL 0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20
+#define MXC_CRMAP_ADCR_DIV_BYP 0x2
+#define MXC_CRMAP_ADCR_VSTAT 0x8
+#define MXC_CRMAP_ADCR_TSTAT 0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10
+#define MXC_CRMAP_ADCR_CLK_ON 0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET 16
+#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET 1
+#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD (1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8
+#define MXC_CRMAP_ACR_CKOD (1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP (1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000
+
+#define NUM_GATE_CTRL 6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1 0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001
+#define MXC_DSM_CONTROL0_RESTART 0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST 0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST 0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32 0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800
+#define MXC_DSM_CONTROL1_SLEEP 0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000
+#define MXC_DSM_CTREN_CNT32 0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX 0x80000000
+#define MXC_DSM_MGPER_PER_MASK 0x000003FF
+#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 0000000..353bd97
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+ {
+ .start = MXC91231_UART1_BASE_ADDR,
+ .end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_UART1_RX,
+ .end = MXC91231_INT_UART1_RX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART1_TX,
+ .end = MXC91231_INT_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART1_MINT,
+ .end = MXC91231_INT_UART1_MINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = MXC91231_UART2_BASE_ADDR,
+ .end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_UART2_RX,
+ .end = MXC91231_INT_UART2_RX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART2_TX,
+ .end = MXC91231_INT_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART2_MINT,
+ .end = MXC91231_INT_UART2_MINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = MXC91231_UART3_BASE_ADDR,
+ .end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_UART3_RX,
+ .end = MXC91231_INT_UART3_RX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART3_TX,
+ .end = MXC91231_INT_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC91231_INT_UART3_MINT,
+ .end = MXC91231_INT_UART3_MINT,
+ .flags = IORESOURCE_IRQ,
+
+ },
+};
+
+struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+ [0] = {
+ .chip.label = "gpio-0",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO1,
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ },
+ [1] = {
+ .chip.label = "gpio-1",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO2,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ },
+ [2] = {
+ .chip.label = "gpio-2",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO3,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ },
+ [3] = {
+ .chip.label = "gpio-3",
+ .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+ .irq = MXC91231_INT_GPIO4,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+ },
+};
+
+int __init mxc_register_gpios(void)
+{
+ return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+ {
+ .start = MXC91231_NFC_BASE_ADDR,
+ .end = MXC91231_NFC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MXC91231_INT_NANDFC,
+ .end = MXC91231_INT_NANDFC,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mxc_nand_device = {
+ .name = "mxc_nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_nand_resources),
+ .resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+ {
+ .start = MXC91231_MMC_SDHC1_BASE_ADDR,
+ .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_MMC_SDHC1,
+ .end = MXC91231_INT_MMC_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+ {
+ .start = MXC91231_MMC_SDHC2_BASE_ADDR,
+ .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_MMC_SDHC2,
+ .end = MXC91231_INT_MMC_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_sdhc_device0 = {
+ .name = "mxc-mmc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+ .resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+ .name = "mxc-mmc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+ .resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+ {
+ .start = MXC91231_CSPI1_BASE_ADDR,
+ .end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_CSPI1,
+ .end = MXC91231_INT_CSPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_cspi_device0 = {
+ .name = "spi_imx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+ .resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+ {
+ .start = MXC91231_CSPI2_BASE_ADDR,
+ .end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC91231_INT_CSPI2,
+ .end = MXC91231_INT_CSPI2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_cspi_device1 = {
+ .name = "spi_imx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+ .resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+ {
+ .start = MXC91231_WDOG1_BASE_ADDR,
+ .end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_wdog_device0 = {
+ .name = "mxc-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+ .resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 0000000..72a2136
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 0000000..405d9b1
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS ((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+ (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \
+ ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \
+ ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+ u32 side, field, l, mode, ret = 0;
+ void __iomem *reg;
+
+ side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+ switch (side) {
+ case MUX_SIDE_AP:
+ reg = IOMUXSW_AP_MUX_CTL;
+ break;
+ case MUX_SIDE_SP:
+ reg = IOMUXSW_SP_MUX_CTL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+ field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+ mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0xff << (field * 8));
+ l |= mode << (field * 8);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+ u32 padgrp, field, l;
+ void __iomem *reg;
+
+ padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+ reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+ field = (pin + 2) % 3;
+
+ pr_debug("%s: reg offset = 0x%x, field = %d\n",
+ __func__, (pin + 2) / 3, field);
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0x1ff << (field * 10));
+ l |= config << (field * 10);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+ unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+ if (pad >= (PIN_MAX + 1)) {
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+ printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+ pad, label ? label : "?");
+ return -EBUSY;
+ }
+ mxc_iomux_mode(pin_mode);
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label)
+{
+ unsigned int *p = pin_list;
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_release_multiple_pins(pin_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+ unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+ if (pad < (PIN_MAX + 1))
+ clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+ unsigned int *p = pin_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_release_pin(*p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 0000000..7dbe4ca
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+ pm_power_off = mxc91231_power_off;
+
+ mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+ mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+ mxc_register_device(&mxc_wdog_device0, NULL);
+
+ return;
+}
+
+static void __init zn5_timer_init(void)
+{
+ mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+ .init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+ .phys_io = MXC91231_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mxc91231_map_io,
+ .init_irq = mxc91231_init_irq,
+ .timer = &zn5_timer,
+ .init_machine = zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 0000000..6becda3
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MXC specific definitions
+ * Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+ {
+ .virtual = MXC91231_L2CC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+ .length = MXC91231_L2CC_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_X_MEMC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+ .length = MXC91231_X_MEMC_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_ROMP_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+ .length = MXC91231_ROMP_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_AVIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+ .length = MXC91231_AVIC_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+ .length = MXC91231_AIPS1_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+ .length = MXC91231_SPBA0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_SPBA1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+ .length = MXC91231_SPBA1_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = MXC91231_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+ .length = MXC91231_AIPS2_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+ mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 0000000..736f7ef
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE (1 << 6)
+#define WDOG_WCR_ASSERT (1 << 5)
+
+void mxc91231_power_off(void)
+{
+ u16 wcr;
+
+ wcr = __raw_readw(WDOG_WCR);
+ wcr |= WDOG_WCR_OUT_ENABLE;
+ wcr &= ~WDOG_WCR_ASSERT;
+ __raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+ u32 amcr;
+
+ /* Reset the AP using CRM */
+ amcr = __raw_readl(MXC_CRMAP_AMCR);
+ amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+ __raw_writel(amcr, MXC_CRMAP_AMCR);
+
+ mdelay(10);
+ cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+ u32 crm_ctl;
+
+ /* Go to WAIT mode after WFI */
+ crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+ crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+ crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+ __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0..844f1f9 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =io_p2v(0x001ff000)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov \base, #io_p2v(0x00100000)
- add \base, \base, #0x000ff000
-
ldr \irqstat, [\base, #0]
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #31
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 0000000..2a02b49
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+ bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+ select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+ bool
+
+
+config I2C_BITBANG_8815NHK
+ tristate "Driver for bit-bang busses found on the 8815 NHK"
+ depends on I2C && MACH_NOMADIK_8815NHK
+ select I2C_ALGOBIT
+ default y
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 0000000..4120409
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y += clock.o timer.o gpio.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 0000000..c7e75ac
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 0000000..79bdea9
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,111 @@
+/*
+ * linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ * Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+ .dev = { .init_name = "uart0" },
+ __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+ .irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+ .dev = { .init_name = "uart1" },
+ __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+ .irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uart0_device,
+ &uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+ .rate = 48*1000*1000,
+};
+
+static struct resource nhk8815_eth_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x34000000 + 0x300,
+ .end = 0x34000000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = NOMADIK_GPIO_TO_IRQ(115),
+ .end = NOMADIK_GPIO_TO_IRQ(115),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+ }
+};
+
+static struct platform_device nhk8815_eth_device = {
+ .name = "smc91x",
+ .resource = nhk8815_eth_resources,
+ .num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+ int gpio_nr = 115; /* hardwired in the board */
+ int err;
+
+ err = gpio_request(gpio_nr, "eth_irq");
+ if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+ if (!err) err = gpio_direction_input(gpio_nr);
+ if (err)
+ pr_err("Error %i in %s\n", err, __func__);
+ return err;
+}
+device_initcall(nhk8815_eth_init);
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+ &nhk8815_eth_device,
+ /* will add more devices */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+ int i;
+
+ cpu8815_platform_init();
+ platform_add_devices(nhk8815_platform_devices,
+ ARRAY_SIZE(nhk8815_platform_devices));
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+ amba_device_register(amba_devs[i], &iomem_resource);
+ }
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+ /* Maintainer: ST MicroElectronics */
+ .phys_io = NOMADIK_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = cpu8815_map_io,
+ .init_irq = cpu8815_init_irq,
+ .timer = &nomadik_timer,
+ .init_machine = nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 0000000..9f92502
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-nomadik/clock.c
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+ struct clk_lookup *clkdev;
+
+ clkdev = clkdev_alloc(clk, NULL, dev_id);
+ if (!clkdev)
+ return -ENOMEM;
+ clkdev_add(clkdev);
+ return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 0000000..235faec
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ * linux/arch/arm/mach-nomadik/clock.h
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+ unsigned long rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 0000000..f93c596
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+ {
+ .name = "GPIO-0-31",
+ .first_gpio = 0,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(0),
+ .parent_irq = IRQ_GPIO0,
+ }, {
+ .name = "GPIO-32-63",
+ .first_gpio = 32,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(32),
+ .parent_irq = IRQ_GPIO1,
+ }, {
+ .name = "GPIO-64-95",
+ .first_gpio = 64,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(64),
+ .parent_irq = IRQ_GPIO2,
+ }, {
+ .name = "GPIO-96-127", /* 124..127 not routed to pin */
+ .first_gpio = 96,
+ .first_irq = NOMADIK_GPIO_TO_IRQ(96),
+ .parent_irq = IRQ_GPIO3,
+ }
+};
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+ {
+ .dev = {
+ .init_name = "gpio0",
+ .platform_data = cpu8815_gpio + 0,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+ }, {
+ .dev = {
+ .init_name = "gpio1",
+ .platform_data = cpu8815_gpio + 1,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+ }, {
+ .dev = {
+ .init_name = "gpio2",
+ .platform_data = cpu8815_gpio + 2,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+ }, {
+ .dev = {
+ .init_name = "gpio3",
+ .platform_data = cpu8815_gpio + 3,
+ },
+ __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+ },
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ cpu8815_amba_gpio + 0,
+ cpu8815_amba_gpio + 1,
+ cpu8815_amba_gpio + 2,
+ cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+ amba_device_register(amba_devs[i], &iomem_resource);
+ return 0;
+}
+arch_initcall(cpu8815_init);
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+ {
+ .virtual = NOMADIK_IO_VIRTUAL,
+ .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL),
+ .length = NOMADIK_IO_SIZE,
+ .type = MT_DEVICE,
+ }
+ /* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+ iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+ /* This modified VIC cell has two register blocks, at 0 and 0x20 */
+ vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
+ vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ */
+ void __init cpu8815_platform_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ /* At full speed latency must be >=2, so 0x249 in low bits */
+ l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
+ return;
+}
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 0000000..9a09b27
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions. The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *addr;
+ unsigned int parent_irq;
+ spinlock_t *lock;
+ /* Keep track of configured edges */
+ u32 edge_rising;
+ u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 afunc, bfunc, bit;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ bit = 1 << (gpio - nmk_chip->chip.base);
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+ bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+ if (gpio_mode & NMK_GPIO_ALT_A)
+ afunc |= bit;
+ if (gpio_mode & NMK_GPIO_ALT_B)
+ bfunc |= bit;
+ writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+ writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ u32 afunc, bfunc, bit;
+
+ nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+ if (!nmk_chip)
+ return -EINVAL;
+
+ bit = 1 << (gpio - nmk_chip->chip.base);
+
+ afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+ bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+ return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ if (!nmk_chip)
+ return;
+ writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 bitmask, reg;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ bitmask = nmk_gpio_get_bitmask(gpio);
+ if (!nmk_chip)
+ return;
+
+ /* we must individually clear the two edges */
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ if (nmk_chip->edge_rising & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+ reg &= ~bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+ }
+ if (nmk_chip->edge_falling & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+ reg &= ~bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+ }
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 bitmask, reg;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ bitmask = nmk_gpio_get_bitmask(gpio);
+ if (!nmk_chip)
+ return;
+
+ /* we must individually set the two edges */
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+ if (nmk_chip->edge_rising & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+ reg |= bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+ }
+ if (nmk_chip->edge_falling & bitmask) {
+ reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+ reg |= bitmask;
+ writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+ }
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+ int gpio;
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ u32 bitmask;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ bitmask = nmk_gpio_get_bitmask(gpio);
+ if (!nmk_chip)
+ return -EINVAL;
+
+ if (type & IRQ_TYPE_LEVEL_HIGH)
+ return -EINVAL;
+ if (type & IRQ_TYPE_LEVEL_LOW)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+
+ nmk_chip->edge_rising &= ~bitmask;
+ if (type & IRQ_TYPE_EDGE_RISING)
+ nmk_chip->edge_rising |= bitmask;
+ writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+ nmk_chip->edge_falling &= ~bitmask;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ nmk_chip->edge_falling |= bitmask;
+ writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ nmk_gpio_irq_unmask(irq);
+
+ return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+ .name = "Nomadik-GPIO",
+ .ack = nmk_gpio_irq_ack,
+ .mask = nmk_gpio_irq_mask,
+ .unmask = nmk_gpio_irq_unmask,
+ .set_type = nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct nmk_gpio_chip *nmk_chip;
+ struct irq_chip *host_chip;
+ unsigned int gpio_irq;
+ u32 pending;
+ unsigned int first_irq;
+
+ nmk_chip = get_irq_data(irq);
+ first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+ while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+ gpio_irq = first_irq + __ffs(pending);
+ generic_handle_irq(gpio_irq);
+ }
+ if (0) {/* don't ack parent irq, as ack == disable */
+ host_chip = get_irq_chip(irq);
+ host_chip->ack(irq);
+ }
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+ unsigned int first_irq;
+ int i;
+
+ first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+ for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+ set_irq_chip(i, &nmk_gpio_irq_chip);
+ set_irq_handler(i, handle_edge_irq);
+ set_irq_flags(i, IRQF_VALID);
+ set_irq_chip_data(i, nmk_chip);
+ }
+ set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+ set_irq_data(nmk_chip->parent_irq, nmk_chip);
+ return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+
+ writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+ return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+
+ writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+ return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+ u32 bit = 1 << offset;
+
+ return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct nmk_gpio_chip *nmk_chip =
+ container_of(chip, struct nmk_gpio_chip, chip);
+ u32 bit = 1 << offset;
+
+ if (val)
+ writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+ else
+ writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+ .direction_input = nmk_gpio_make_input,
+ .get = nmk_gpio_get_input,
+ .direction_output = nmk_gpio_make_output,
+ .set = nmk_gpio_set_output,
+ .ngpio = NMK_GPIO_PER_CHIP,
+ .can_sleep = 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+ struct nmk_gpio_platform_data *pdata;
+ struct nmk_gpio_chip *nmk_chip;
+ struct gpio_chip *chip;
+ int ret;
+
+ pdata = dev->dev.platform_data;
+ ret = amba_request_regions(dev, pdata->name);
+ if (ret)
+ return ret;
+
+ nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+ if (!nmk_chip) {
+ ret = -ENOMEM;
+ goto out_amba;
+ }
+ /*
+ * The virt address in nmk_chip->addr is in the nomadik register space,
+ * so we can simply convert the resource address, without remapping
+ */
+ nmk_chip->addr = io_p2v(dev->res.start);
+ nmk_chip->chip = nmk_gpio_template;
+ nmk_chip->parent_irq = pdata->parent_irq;
+
+ chip = &nmk_chip->chip;
+ chip->base = pdata->first_gpio;
+ chip->label = pdata->name;
+ chip->dev = &dev->dev;
+ chip->owner = THIS_MODULE;
+
+ ret = gpiochip_add(&nmk_chip->chip);
+ if (ret)
+ goto out_free;
+
+ amba_set_drvdata(dev, nmk_chip);
+
+ nmk_gpio_init_irq(nmk_chip);
+
+ dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+ nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+ return 0;
+
+ out_free:
+ kfree(nmk_chip);
+ out_amba:
+ amba_release_regions(dev);
+ dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+ pdata->first_gpio, pdata->first_gpio+31);
+ return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+ struct nmk_gpio_chip *nmk_chip;
+
+ nmk_chip = amba_get_drvdata(dev);
+ gpiochip_remove(&nmk_chip->chip);
+ kfree(nmk_chip);
+ amba_release_regions(dev);
+ return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+ {
+ .id = 0x1f080060,
+ .mask = 0xffefffff,
+ },
+ {0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+ .drv = {
+ .owner = THIS_MODULE,
+ .name = "gpio",
+ },
+ .probe = nmk_gpio_probe,
+ .remove = nmk_gpio_remove,
+ .suspend = NULL, /* to be done */
+ .resume = NULL,
+ .id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+ return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 0000000..abfe25a
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 62,
+ .sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 53,
+ .sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data0,
+ },
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data1,
+ },
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+ nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+ nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+ platform_device_register(&nhk8815_i2c_dev0);
+
+ nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+ nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+ platform_device_register(&nhk8815_i2c_dev1);
+
+ return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+ platform_device_unregister(&nhk8815_i2c_dev0);
+ platform_device_unregister(&nhk8815_i2c_dev1);
+ return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 0000000..e876990
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x10000000 @ physical base address
+ movne \rx, #0xf0000000 @ virtual base
+ add \rx, \rx, #0x00100000
+ add \rx, \rx, #0x000fb000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 0000000..49f1aa3
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(NOMADIK_IC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ /* This stanza gets the irq mask from one of two status registers */
+ mov \irqnr, #0
+ ldr \irqstat, [\base, #VIC_REG_IRQSR0] @ get masked status
+ cmp \irqstat, #0
+ bne 1001f
+ add \irqnr, \irqnr, #32
+ ldr \irqstat, [\base, #VIC_REG_IRQSR1] @ get masked status
+
+1001: tst \irqstat, #15
+ bne 1002f
+ add \irqnr, \irqnr, #4
+ movs \irqstat, \irqstat, lsr #4
+ bne 1001b
+1002: tst \irqstat, #1
+ bne 1003f
+ add \irqnr, \irqnr, #1
+ movs \irqstat, \irqstat, lsr #1
+ bne 1002b
+1003: /* EQ will be set if no irqs pending */
+ .endm
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 0000000..61577c9
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT 0x00
+#define NMK_GPIO_DATS 0x04
+#define NMK_GPIO_DATC 0x08
+#define NMK_GPIO_PDIS 0x0c
+#define NMK_GPIO_DIR 0x10
+#define NMK_GPIO_DIRS 0x14
+#define NMK_GPIO_DIRC 0x18
+#define NMK_GPIO_SLPC 0x1c
+#define NMK_GPIO_AFSLA 0x20
+#define NMK_GPIO_AFSLB 0x24
+
+#define NMK_GPIO_RIMSC 0x40
+#define NMK_GPIO_FIMSC 0x44
+#define NMK_GPIO_IS 0x48
+#define NMK_GPIO_IC 0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS 0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO 0
+#define NMK_GPIO_ALT_A 1
+#define NMK_GPIO_ALT_B 2
+#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+ char *name;
+ int first_gpio;
+ int first_irq;
+ int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 0000000..6316dba
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */
+#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */
+#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+ - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+ - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ * Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
+#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
+#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
+#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
+#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
+#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
+#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
+#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
+#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
+#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
+#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
+#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
+#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
+#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
+#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
+#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
+#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
+#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
+#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
+#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
+#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
+#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
+#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
+#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
+#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
+#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM 0x80010000
+#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 0000000..2e1eca1
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 0000000..8faabc5
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ * mach-nomadik/include/mach/irqs.h
+ *
+ * Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG 0
+#define IRQ_SOFTINT 1
+#define IRQ_CRYPTO 2
+#define IRQ_OWM 3
+#define IRQ_MTU0 4
+#define IRQ_MTU1 5
+#define IRQ_GPIO0 6
+#define IRQ_GPIO1 7
+#define IRQ_GPIO2 8
+#define IRQ_GPIO3 9
+#define IRQ_RTC_RTT 10
+#define IRQ_SSP 11
+#define IRQ_UART0 12
+#define IRQ_DMA1 13
+#define IRQ_CLCD_MDIF 14
+#define IRQ_DMA0 15
+#define IRQ_PWRFAIL 16
+#define IRQ_UART1 17
+#define IRQ_FIRDA 18
+#define IRQ_MSP0 19
+#define IRQ_I2C0 20
+#define IRQ_I2C1 21
+#define IRQ_SDMMC 22
+#define IRQ_USBOTG 23
+#define IRQ_SVA_IT0 24
+#define IRQ_SVA_IT1 25
+#define IRQ_SAA_IT0 26
+#define IRQ_SAA_IT1 27
+#define IRQ_UART2 28
+#define IRQ_MSP2 31
+#define IRQ_L2CC 48
+#define IRQ_HPI 49
+#define IRQ_SKE 50
+#define IRQ_KP 51
+#define IRQ_MEMST 54
+#define IRQ_SGA_IT 58
+#define IRQ_USBM 60
+#define IRQ_MSP1 62
+
+#define NOMADIK_SOC_NR_IRQS 64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0 0
+#define VIC_REG_IRQSR1 0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 0000000..1e5689d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * mach-nomadik/include/mach/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 0000000..76da7f0
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
+#define MTU_RIS 0x04 /* Raw interrupt status */
+#define MTU_MIS 0x08 /* Masked interrupt status */
+#define MTU_ICR 0x0C /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
+#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
+#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
+#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA 0x80
+#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK 0x0c
+#define MTU_CRn_PRESCALE_1 0x00
+#define MTU_CRn_PRESCALE_16 0x04
+#define MTU_CRn_PRESCALE_256 0x08
+#define MTU_CRn_32BITS 0x02
+#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR 0xff0
+#define MTU_ITOP 0xff4
+
+#define MTU_PERIPH_ID0 0xfe0
+#define MTU_PERIPH_ID1 0xfe4
+#define MTU_PERIPH_ID2 0xfe8
+#define MTU_PERIPH_ID3 0xfeC
+
+#define MTU_PCELL0 0xff0
+#define MTU_PCELL1 0xff4
+#define MTU_PCELL2 0xff8
+#define MTU_PCELL3 0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 0000000..a4e468c
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 0000000..7119f68
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ * mach-nomadik/include/mach/system.h
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+ /* FIXME: use egpio when implemented */
+
+ /* Write anything to Reset status register */
+ writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 0000000..318b889
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 0000000..071003b
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR 0x101FB000
+#define NOMADIK_UART_LCRH 0x101FB02c
+#define NOMADIK_UART_CR 0x101FB030
+#define NOMADIK_UART_FR 0x101FB018
+
+static void putc(const char c)
+{
+ /* Do nothing if the UART is not enabled. */
+ if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+ return;
+
+ if (c == '\n')
+ putc('\r');
+
+ while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+ barrier();
+ writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+ if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+ return;
+ while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+ barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 0000000..be12e31
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END 0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 0000000..d1738e7
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ * linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL 0x80 /* No divisor */
+#define TIMER_PERIODIC 0x40
+#define TIMER_SZ32BIT 0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
+static u32 nmdk_count; /* accumulated count */
+static u32 nmdk_cycle; /* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+ u32 count = readl(mtu_base + MTU_VAL(0));
+ return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+ .name = "mtu_0",
+ .rating = 120,
+ .read = nmdk_read_timer,
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* enable interrupts -- and count current value? */
+ raw_local_irq_save(flags);
+ writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+ raw_local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ BUG(); /* Not supported, yet */
+ /* FALLTHROUGH */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ /* disable irq */
+ raw_local_irq_save(flags);
+ writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+ raw_local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device nmdk_clkevt = {
+ .name = "mtu_0",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 32,
+ .rating = 100,
+ .set_mode = nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+ /* ack: "interrupt clear register" */
+ writel( 1 << 0, mtu_base + MTU_ICR);
+
+ /* we can't count lost ticks, unfortunately */
+ nmdk_count += nmdk_cycle;
+ nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+ .name = "Nomadik Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+ u32 cr;
+
+ writel(0, mtu_base + MTU_CR(0)); /* off */
+
+ /* configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+ cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+ writel(cr, mtu_base + MTU_CR(0));
+ writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+ u32 src_cr;
+ unsigned long rate;
+ int bits;
+
+ rate = CLOCK_TICK_RATE; /* 2.4MHz */
+ nmdk_cycle = (rate + HZ/2) / HZ;
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+ /* Save global pointer to mtu, used by functions above */
+ mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+ /* Init the timer and register clocksource */
+ nmdk_timer_reset();
+
+ nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+ bits = 8*sizeof(nmdk_count);
+ nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+ clocksource_register(&nmdk_clksrc);
+
+ /* Register irq and clockevents */
+ setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+ nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+ nmdk_clkevt.cpumask = cpumask_of(0);
+ clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+ .init = nmdk_timer_init,
+};
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index b0c7402..1b22307 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@
};
static struct omap_uart_config sdp4430_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 99b6e15..a846aa1 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -128,6 +128,7 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
@@ -136,6 +137,7 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x3FF,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
@@ -144,6 +146,7 @@
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
@@ -152,6 +155,7 @@
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
@@ -160,6 +164,7 @@
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
+ .buffer_size = 0x6F,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
@@ -168,6 +173,42 @@
#define OMAP34XX_MCBSP_PDATA_SZ 0
#endif
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+ {
+ .phys_base = OMAP44XX_MCBSP1_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
+ .rx_irq = INT_24XX_MCBSP1_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP1_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+ {
+ .phys_base = OMAP44XX_MCBSP2_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
+ .rx_irq = INT_24XX_MCBSP2_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP2_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+ {
+ .phys_base = OMAP44XX_MCBSP3_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
+ .rx_irq = INT_24XX_MCBSP3_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP3_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+ {
+ .phys_base = OMAP44XX_MCBSP4_BASE,
+ .dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
+ .dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
+ .rx_irq = INT_24XX_MCBSP4_IRQ_RX,
+ .tx_irq = INT_24XX_MCBSP4_IRQ_TX,
+ .ops = &omap2_mcbsp_ops,
+ },
+};
+#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
static int __init omap2_mcbsp_init(void)
{
if (cpu_is_omap2420())
@@ -176,6 +217,8 @@
omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
if (cpu_is_omap34xx())
omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+ if (cpu_is_omap44xx())
+ omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
GFP_KERNEL);
@@ -191,6 +234,9 @@
if (cpu_is_omap34xx())
omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
OMAP34XX_MCBSP_PDATA_SZ);
+ if (cpu_is_omap44xx())
+ omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+ OMAP44XX_MCBSP_PDATA_SZ);
return omap_mcbsp_init();
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a7421a5..ce22344 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,6 +109,16 @@
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+#ifdef CONFIG_ARCH_OMAP4
+ .membase = IO_ADDRESS(OMAP_UART4_BASE),
+ .mapbase = OMAP_UART4_BASE,
+ .irq = 70,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
+ }, {
+#endif
.flags = 0
}
};
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d..c3d513c 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,27 @@
Say 'Y' here if you want your kernel to support the
LaCie Ethernet Disk mini V2.
+config MACH_D2NET
+ bool "LaCie d2 Network"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+ bool "LaCie Big Disk Network"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Big Disk Network NAS.
+
+config MACH_NET2BIG
+ bool "LaCie 2Big Network"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big Network NAS.
+
config MACH_MSS2
bool "Maxtor Shared Storage II"
help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2..89772fc 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,9 @@
obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET) += d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731e..1a5d6a0 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@
orion5x_pcie_id(&dev, &rev);
if ((dev == MV88F5281_DEV_ID && win < 4)
|| (dev == MV88F5182_DEV_ID && win < 2)
- || (dev == MV88F5181_DEV_ID && win < 2))
+ || (dev == MV88F5181_DEV_ID && win < 2)
+ || (dev == MV88F6183_DEV_ID && win < 4))
return 1;
return 0;
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 0000000..9d4bf76
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE 0xfff80000
+#define D2NET_NOR_BOOT_SIZE SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+ {
+ .name = "Full512kb",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+ .width = 1,
+ .parts = d2net_partitions,
+ .nr_parts = ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = D2NET_NOR_BOOT_BASE,
+ .end = D2NET_NOR_BOOT_BASE
+ + D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &d2net_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip | description
+ * 0x32 | Ricoh 5C372b | RTC
+ * 0x3e | GMT G762 | PWM fan controller
+ * 0x50 | HT24LC08 | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rs5c372b", 0x32),
+ }, {
+ I2C_BOARD_INFO("24c08", 0x50),
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+ .n_ports = 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER 3
+#define D2NET_GPIO_SATA1_POWER 12
+
+static void __init d2net_sata_power_init(void)
+{
+ int err;
+
+ err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_SATA0_POWER);
+ }
+ if (err)
+ pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+ err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_SATA1_POWER);
+ }
+ if (err)
+ pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off | blink_ctrl | SATA active | LED state
+ * | | |
+ * 1 | x | x | off
+ * 0 | 0 | 0 | off
+ * 0 | 1 | 0 | blink (rate 300ms)
+ * 0 | x | 1 | on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ * Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED 6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
+#define D2NET_GPIO_BLUE_LED_OFF 23
+#define D2NET_GPIO_SATA0_ACT 14
+#define D2NET_GPIO_SATA1_ACT 15
+
+static struct gpio_led d2net_leds[] = {
+ {
+ .name = "d2net:blue:power",
+ .gpio = D2NET_GPIO_BLUE_LED_OFF,
+ .active_low = 1,
+ },
+ {
+ .name = "d2net:red:fail",
+ .gpio = D2NET_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+ .num_leds = ARRAY_SIZE(d2net_leds),
+ .leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_led_data,
+ },
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+ /* Configure GPIO over MPP max number. */
+ orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+ if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+ return;
+ if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+ goto err_free_1;
+ if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+ goto err_free_1;
+ if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+ goto err_free_2;
+ platform_device_register(&d2net_gpio_leds);
+ return;
+
+err_free_2:
+ gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+ gpio_free(D2NET_GPIO_SATA0_ACT);
+ return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON 18
+#define D2NET_GPIO_POWER_SWITCH_ON 8
+#define D2NET_GPIO_POWER_SWITCH_OFF 9
+
+#define D2NET_SWITCH_POWER_ON 0x1
+#define D2NET_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = D2NET_SWITCH_POWER_OFF,
+ .gpio = D2NET_GPIO_POWER_SWITCH_OFF,
+ .desc = "Power rocker switch (auto|off)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_SW,
+ .code = D2NET_SWITCH_POWER_ON,
+ .gpio = D2NET_GPIO_POWER_SWITCH_ON,
+ .desc = "Power rocker switch (on|auto)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = D2NET_GPIO_PUSH_BUTTON,
+ .desc = "Front Push Button",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+ .buttons = d2net_buttons,
+ .nbuttons = ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_button_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Board ID (bit 0) */
+ { 1, MPP_GPIO }, /* Board ID (bit 1) */
+ { 2, MPP_GPIO }, /* Board ID (bit 2) */
+ { 3, MPP_GPIO }, /* SATA 0 power */
+ { 4, MPP_UNUSED },
+ { 5, MPP_GPIO }, /* Fan fail detection */
+ { 6, MPP_GPIO }, /* Red front LED */
+ { 7, MPP_UNUSED },
+ { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
+ { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
+ { 10, MPP_UNUSED },
+ { 11, MPP_UNUSED },
+ { 12, MPP_GPIO }, /* SATA 1 power */
+ { 13, MPP_UNUSED },
+ { 14, MPP_GPIO }, /* SATA 0 active */
+ { 15, MPP_GPIO }, /* SATA 1 active */
+ { 16, MPP_GPIO }, /* Blue front LED blink control */
+ { 17, MPP_UNUSED },
+ { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
+ { 19, MPP_UNUSED },
+ { -1 }
+ /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+ /* 23: Blue front LED off */
+ /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(d2net_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_eth_init(&d2net_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+
+ d2net_sata_power_init();
+ orion5x_sata_init(&d2net_sata_data);
+
+ orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+ D2NET_NOR_BOOT_SIZE);
+ platform_device_register(&d2net_nor_flash);
+
+ platform_device_register(&d2net_gpio_buttons);
+
+ d2net_gpio_leds_init();
+
+ pr_notice("d2net: Flash write are not yet supported.\n");
+
+ i2c_register_board_info(0, d2net_i2c_devices,
+ ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = d2net_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = d2net_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 0000000..7bd6283
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE 0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+ {
+ .name = "Full512kb",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00000000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+ .width = 1,
+ .parts = net2big_partitions,
+ .nr_parts = ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = NET2BIG_NOR_BOOT_BASE,
+ .end = NET2BIG_NOR_BOOT_BASE
+ + NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &net2big_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip | description
+ * 0x32 | Ricoh 5C372b | RTC
+ * 0x50 | HT24LC08 | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rs5c372b", 0x32),
+ }, {
+ I2C_BOARD_INFO("24c08", 0x50),
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+ .n_ports = 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ 19
+#define NET2BIG_GPIO_SATA0_POWER 23
+#define NET2BIG_GPIO_SATA1_POWER 25
+
+static void __init net2big_sata_power_init(void)
+{
+ int err;
+
+ /* Configure GPIOs over MPP max number. */
+ orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+ orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+ err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+ if (err == 0) {
+ err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA0_POWER);
+ }
+ if (err) {
+ pr_err("net2big: failed to setup SATA0 power GPIO\n");
+ return;
+ }
+
+ err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+ if (err == 0) {
+ err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA1_POWER);
+ }
+ if (err) {
+ pr_err("net2big: failed to setup SATA1 power GPIO\n");
+ goto err_free_1;
+ }
+
+ err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+ }
+ if (err) {
+ pr_err("net2big: failed to setup SATA power request GPIO\n");
+ goto err_free_2;
+ }
+
+ if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+ gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+ return;
+ }
+
+ /*
+ * SATA power up on both disk is done by pulling high the CPLD power
+ * request line. The 300ms delay is related to the CPLD clock and is
+ * needed to be sure that the CPLD has take into account the low line
+ * status.
+ */
+ msleep(300);
+ gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+ pr_info("net2big: power up SATA hard disks\n");
+
+ return;
+
+err_free_2:
+ gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+ gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+ return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ * | |
+ * 0 | 0 | blink (rate 300ms)
+ * 1 | 0 | off
+ * ? | 1 | on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ * Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED 6
+#define NET2BIG_GPIO_PWR_BLUE_LED 16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7
+
+#define NET2BIG_GPIO_SATA0_RED_LED 11
+#define NET2BIG_GPIO_SATA1_RED_LED 10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED 17
+#define NET2BIG_GPIO_SATA1_BLUE_LED 13
+
+static struct gpio_led net2big_leds[] = {
+ {
+ .name = "net2big:red:power",
+ .gpio = NET2BIG_GPIO_PWR_RED_LED,
+ },
+ {
+ .name = "net2big:blue:power",
+ .gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+ },
+ {
+ .name = "net2big:red:sata0",
+ .gpio = NET2BIG_GPIO_SATA0_RED_LED,
+ },
+ {
+ .name = "net2big:red:sata1",
+ .gpio = NET2BIG_GPIO_SATA1_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+ .num_leds = ARRAY_SIZE(net2big_leds),
+ .leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_led_data,
+ },
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+ int err;
+
+ /* Stop initial CPLD slow red/blue blinking on power LED. */
+ err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+ "Power LED blink stop");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+ if (err)
+ gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+ }
+ if (err)
+ pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+ /*
+ * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+ * hard disk activity.
+ */
+ err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+ "SATA0 blue LED control");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+ }
+ if (err)
+ pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+ err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+ "SATA1 blue LED control");
+ if (err == 0) {
+ err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+ if (err)
+ gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+ }
+ if (err)
+ pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+ platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON 18
+#define NET2BIG_GPIO_POWER_SWITCH_ON 8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF 9
+
+#define NET2BIG_SWITCH_POWER_ON 0x1
+#define NET2BIG_SWITCH_POWER_OFF 0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = NET2BIG_SWITCH_POWER_OFF,
+ .gpio = NET2BIG_GPIO_POWER_SWITCH_OFF,
+ .desc = "Power rocker switch (auto|off)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_SW,
+ .code = NET2BIG_SWITCH_POWER_ON,
+ .gpio = NET2BIG_GPIO_POWER_SWITCH_ON,
+ .desc = "Power rocker switch (on|auto)",
+ .active_low = 0,
+ },
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = NET2BIG_GPIO_PUSH_BUTTON,
+ .desc = "Front Push Button",
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+ .buttons = net2big_buttons,
+ .nbuttons = ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &net2big_button_data,
+ },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Raid mode (bit 0) */
+ { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
+ { 2, MPP_GPIO }, /* Raid mode (bit 1) */
+ { 3, MPP_GPIO }, /* Board ID (bit 0) */
+ { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */
+ { 5, MPP_GPIO }, /* Fan fail detection */
+ { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */
+ { 7, MPP_GPIO }, /* Disable initial blinking on front LED */
+ { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
+ { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
+ { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */
+ { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */
+ { 12, MPP_GPIO }, /* Board ID (bit 1) */
+ { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */
+ { 14, MPP_SATA_LED },
+ { 15, MPP_SATA_LED },
+ { 16, MPP_GPIO }, /* Blue front LED control */
+ { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */
+ { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
+ { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */
+ { -1 }
+ /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+ /* 23: SATA 0 power status */
+ /* 24: Board power off */
+ /* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF 24
+
+static void net2big_power_off(void)
+{
+ gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(net2big_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&net2big_eth_data);
+ orion5x_i2c_init();
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ net2big_sata_power_init();
+ orion5x_sata_init(&net2big_sata_data);
+
+ orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+ NET2BIG_NOR_BOOT_SIZE);
+ platform_device_register(&net2big_nor_flash);
+
+ platform_device_register(&net2big_gpio_buttons);
+ net2big_gpio_leds_init();
+
+ i2c_register_board_info(0, net2big_i2c_devices,
+ ARRAY_SIZE(net2big_i2c_devices));
+
+ orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+ if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = net2big_power_off;
+ else
+ pr_err("net2big: failed to configure power-off GPIO\n");
+
+ pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = net2big_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index 16eb025..a3449e3 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -3,10 +3,12 @@
#include <sound/core.h>
#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
/*
* @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
* a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
* reset_gpio should only be specified for pxa27x CPUs where a silicon
* bug prevents correct operation of the reset line. If not specified,
@@ -20,6 +22,7 @@
void (*resume)(void *);
void *priv;
int reset_gpio;
+ void *codec_pdata[AC97_BUS_MAX_DEVICES];
} pxa2xx_audio_ops_t;
extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c06..629e05d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@
dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
}
- if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
- {
+ if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+ (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa21..dfc9b0b 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
- depends on !MACH_REALVIEW_PB1176
+ depends on MMU && !MACH_REALVIEW_PB1176
default y
help
RealView boards other than PB1176 have the RAM available at
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index facbd49..dc3519c5 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -221,6 +221,9 @@
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
static unsigned int realview_mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -237,11 +240,15 @@
struct mmc_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
+ .gpio_wp = 17,
+ .gpio_cd = 16,
};
struct mmc_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
+ .gpio_wp = 19,
+ .gpio_cd = 18,
};
/*
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 0000000..94ff276
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f..8a638d1 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
#include <asm/sizes.h>
/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
/*
* Statically mapped addresses:
*
@@ -33,6 +34,9 @@
* 1fxx xxxx -> fexx xxxx
*/
#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x) (x)
+#endif
#define __io_address(n) __io(IO_ADDRESS(n))
#endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f..a88458b 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/localtimer.h>
+#include <asm/unified.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@
static void __init poke_milo(void)
{
- extern void secondary_startup(void);
-
/* nobody is to be released from the pen yet */
pen_release = -1;
/*
- * write the address of secondary startup into the system-wide
- * flags register, then clear the bottom two bits, which is what
- * BootMonitor is waiting for
+ * Write the address of secondary startup into the system-wide flags
+ * register. The BootMonitor waits for this register to become
+ * non-zero.
*/
-#if 1
#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
- __raw_writel(virt_to_phys(realview_secondary_startup),
+#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
+ __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
__io_address(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSS_OFFSET);
-#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
- __raw_writel(3,
- __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
mb();
}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e..abd13b4 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -113,6 +114,21 @@
iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView EB AMBA devices
*/
@@ -189,9 +205,9 @@
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71..17fbb0e 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -107,6 +108,21 @@
iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PB1176 AMBA devices
*/
@@ -164,9 +180,9 @@
AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b169..fdd042b 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -108,6 +109,21 @@
iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PB11MPCore AMBA devices
*/
@@ -166,9 +182,9 @@
AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb..70bba99 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -98,6 +99,21 @@
iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PBA8Core AMBA devices
*/
@@ -156,9 +172,9 @@
AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57..ce6c5d2 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -118,6 +119,21 @@
iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PBXCore AMBA devices
*/
@@ -176,9 +192,9 @@
AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d..d8c023d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@
select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
+ select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@
Internal node for machines with an BAST style IDE
interface
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+ bool
+ depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
menu "S3C2410 Machines"
config ARCH_SMDK2410
@@ -79,6 +96,7 @@
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
+ select S3C2410_IOTIMING if S3C2410_CPUFREQ
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f8..2ab5ba4 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,8 @@
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
# Machine support
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 0000000..9d11868
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ u32 clkdiv = 0;
+
+ if (cfg->divs.h_divisor == 2)
+ clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long hclk, fclk, pclk;
+ unsigned int hdiv, pdiv;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ hclk_max = cfg->max.hclk;
+
+ cfg->freq.armclk = fclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+ __func__, fclk, hclk_max);
+
+ hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+ hclk = fclk / hdiv;
+
+ if (hclk > cfg->max.hclk) {
+ s3c_freq_dbg("%s: hclk too big\n", __func__);
+ return -EINVAL;
+ }
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+ pclk = hclk / pdiv;
+
+ if (pclk > cfg->max.pclk) {
+ s3c_freq_dbg("%s: pclk too big\n", __func__);
+ return -EINVAL;
+ }
+
+ pdiv *= hdiv;
+
+ /* record the result */
+ cfg->divs.p_divisor = pdiv;
+ cfg->divs.h_divisor = hdiv;
+
+ return 0 ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ /* transition latency is about 5ms worst-case, so
+ * set 10ms to be sure */
+ .latency = 10000000,
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 12,
+
+ .need_pll = 1,
+
+ .name = "s3c2410",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .resume_clocks = s3c2410_setup_clocks,
+
+ .set_fvco = s3c2410_set_fvco,
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2410_cpufreq_setdivs,
+ .calc_divs = s3c2410_cpufreq_calcdivs,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+ return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+ .add = s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass,
+ &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+ /* alter the maximum freq settings for S3C2410A. If a board knows
+ * it only has a maximum of 200, then it should register its own
+ * limits. */
+
+ s3c2410_cpufreq_info.max.fclk = 266000000;
+ s3c2410_cpufreq_info.max.hclk = 133000000;
+ s3c2410_cpufreq_info.max.pclk = 66500000;
+ s3c2410_cpufreq_info.name = "s3c2410a";
+
+ return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+ .add = s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass,
+ &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e6..63b753f 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@
}
arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+ .add = s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384f..6c12c63 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
#define FIQ_START IRQ_EINT0
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212..b049e61 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2443_SZ_HSMMC (256)
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC (0x4F000000)
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI (0x48800000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
/* physical addresses of all the chip-select areas */
#define S3C2410_CS0 (0x00000000)
@@ -103,5 +110,6 @@
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
+#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c..f6e8eec 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
-#define S3C2410_GPD9_MASK (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
+#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
#define S3C2410_GPD11_VD19 (0x02 << 22)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 5775980..7f7c529 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
#define S3C2410_BWSCON_WS7 (1<<30)
#define S3C2410_BWSCON_ST7 (1<<31)
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8 (0)
+#define S3C2410_BWSCON_DW16 (1)
+#define S3C2410_BWSCON_DW32 (2)
+#define S3C2410_BWSCON_WS (1 << 2)
+#define S3C2410_BWSCON_ST (1 << 3)
+
/* memory set (rom, ram) */
#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf271..fb63525 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
#ifndef __ASM_ARM_REGS_S3C2412_MEM
#define __ASM_ARM_REGS_S3C2412_MEM
-#ifndef S3C2412_MEMREG
#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
+/* EBI control registers */
+
+#define S3C2412_EBI_PR S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C)
+
#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb..193b39d 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@
extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable);
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable);
+
#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 9215039..5e2f353 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@
.resume = s3c24xx_irq_resume,
};
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
{
return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
}
arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+ .add = s3c2410_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2..647c9ad 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
+#include <plat/hwmon.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <mach/fb.h>
@@ -59,6 +60,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
@@ -547,7 +549,35 @@
},
};
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+ /* LCD contrast (0-6.6V) */
+ .in[0] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-contrast",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* LED current feedback */
+ .in[1] = &(struct s3c_hwmon_chcfg) {
+ .name = "led-feedback",
+ .mult = 3300,
+ .div = 1024,
+ },
+ /* LCD feedback (0-6.6V) */
+ .in[2] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-feedback",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* Vcore (1.8-2.0V), Vref 3.3V */
+ .in[3] = &(struct s3c_hwmon_chcfg) {
+ .name = "vcore",
+ .mult = 3300,
+ .div = 1024,
+ },
+};
+
/* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
&s3c_device_usb,
@@ -556,6 +586,8 @@
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_hwmon,
&bast_device_dm9k,
&bast_device_asix,
&bast_device_axpp,
@@ -570,6 +602,12 @@
&s3c24xx_uclk,
};
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+ .refresh = 7800, /* 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
static void __init bast_map_io(void)
{
/* initialise the clocks */
@@ -588,6 +626,7 @@
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
+ s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
@@ -608,6 +647,8 @@
usb_simtec_init();
nor_simtec_init();
+
+ s3c_cpufreq_setboard(&bast_cpufreq);
}
MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 0000000..f178c2f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+ { .frequency = 34000000, .index = PLLVAL(82, 2, 3), },
+ { .frequency = 45000000, .index = PLLVAL(82, 1, 3), },
+ { .frequency = 51000000, .index = PLLVAL(161, 3, 3), },
+ { .frequency = 48000000, .index = PLLVAL(120, 2, 3), },
+ { .frequency = 56000000, .index = PLLVAL(142, 2, 3), },
+ { .frequency = 68000000, .index = PLLVAL(82, 2, 2), },
+ { .frequency = 79000000, .index = PLLVAL(71, 1, 2), },
+ { .frequency = 85000000, .index = PLLVAL(105, 2, 2), },
+ { .frequency = 90000000, .index = PLLVAL(112, 2, 2), },
+ { .frequency = 101000000, .index = PLLVAL(127, 2, 2), },
+ { .frequency = 113000000, .index = PLLVAL(105, 1, 2), },
+ { .frequency = 118000000, .index = PLLVAL(150, 2, 2), },
+ { .frequency = 124000000, .index = PLLVAL(116, 1, 2), },
+ { .frequency = 135000000, .index = PLLVAL(82, 2, 1), },
+ { .frequency = 147000000, .index = PLLVAL(90, 2, 1), },
+ { .frequency = 152000000, .index = PLLVAL(68, 1, 1), },
+ { .frequency = 158000000, .index = PLLVAL(71, 1, 1), },
+ { .frequency = 170000000, .index = PLLVAL(77, 1, 1), },
+ { .frequency = 180000000, .index = PLLVAL(82, 1, 1), },
+ { .frequency = 186000000, .index = PLLVAL(85, 1, 1), },
+ { .frequency = 192000000, .index = PLLVAL(88, 1, 1), },
+ { .frequency = 203000000, .index = PLLVAL(161, 3, 1), },
+
+ /* 2410A extras */
+
+ { .frequency = 210000000, .index = PLLVAL(132, 2, 1), },
+ { .frequency = 226000000, .index = PLLVAL(105, 1, 1), },
+ { .frequency = 266000000, .index = PLLVAL(125, 1, 1), },
+ { .frequency = 268000000, .index = PLLVAL(126, 1, 1), },
+ { .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+ return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+ .add = s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+ .add = s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a..966119c 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@
}
arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1..91ba42f 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,17 +105,33 @@
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+ .name = "armclk",
+ .parent = &clk_f,
+ .id = -1,
+};
+
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
+ s3c24xx_register_clock(&s3c2410_armclk);
}
struct sysdev_class s3c2410_sysclass = {
.name = "s3c2410-core",
};
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+ .name = "s3c2410a-core",
+};
+
static struct sys_device s3c2410_sysdev = {
.cls = &s3c2410_sysclass,
};
@@ -133,9 +149,22 @@
core_initcall(s3c2410_core_init);
+static int __init s3c2410a_core_init(void)
+{
+ return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
int __init s3c2410_init(void)
{
printk("S3C2410: Initialising architecture\n");
return sysdev_register(&s3c2410_sysdev);
}
+
+int __init s3c2410a_init(void)
+{
+ s3c2410_sysdev.cls = &s3c2410a_sysclass;
+ return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ff..35c1bde 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,15 @@
help
Internal config node to apply S3C2412 power management
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ select S3C2412_IOTIMING
+ default y
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
menu "S3C2412 Machines"
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5..530ec46 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 0000000..eb3ea17
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv, armdiv, dvs;
+ unsigned long hclk, fclk, armclk, armdiv_clk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ /* We can't run hclk above armclk as at the best we have to
+ * have armclk and hclk in dvs mode. */
+
+ if (hclk_max > armclk)
+ hclk_max = armclk;
+
+ s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+ __func__, fclk, armclk, hclk_max);
+ s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+ __func__, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->freq.pclk);
+
+ armdiv = fclk / armclk;
+
+ if (armdiv < 1)
+ armdiv = 1;
+ if (armdiv > 2)
+ armdiv = 2;
+
+ cfg->divs.arm_divisor = armdiv;
+ armdiv_clk = fclk / armdiv;
+
+ hdiv = armdiv_clk / hclk_max;
+ if (hdiv < 1)
+ hdiv = 1;
+
+ cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+ /* set dvs depending on whether we reached armclk or not. */
+ cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+ /* update the actual armclk we achieved. */
+ cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+ s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+ __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+ if (hdiv > 4)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ cfg->freq.pclk = hclk / pdiv;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv * armdiv;
+ cfg->divs.p_divisor = pdiv * armdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv;
+ unsigned long olddiv;
+
+ olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+ /* clear off current clock info */
+
+ clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+ clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+ clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+ if (cfg->divs.arm_divisor == 2)
+ clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+ clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+ s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+
+ s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+ board->refresh, cfg->freq.hclk);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * by 10 each to ensure that we do not overflow 32 bit numbers. This
+ * should work for HCLK up to 133MHz and refresh period up to 30usec.
+ */
+
+ refresh = (board->refresh / 10);
+ refresh *= (cfg->freq.hclk / 100);
+ refresh /= (1 * 1000 * 1000); /* 10^6 */
+
+ s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ .latency = 5000000, /* 5ms */
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 16,
+
+ .name = "s3c2412",
+ .set_refresh = s3c2412_cpufreq_setrefresh,
+ .set_divs = s3c2412_cpufreq_setdivs,
+ .calc_divs = s3c2412_cpufreq_calcdivs,
+
+ .calc_iotiming = s3c2412_iotiming_calc,
+ .set_iotiming = s3c2412_iotiming_set,
+ .get_iotiming = s3c2412_iotiming_get,
+
+ .resume_clocks = s3c2412_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+ unsigned long fclk_rate;
+
+ hclk = clk_get(NULL, "hclk");
+ if (IS_ERR(hclk)) {
+ printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+ return -ENOENT;
+ }
+
+ fclk = clk_get(NULL, "fclk");
+ if (IS_ERR(fclk)) {
+ printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+ goto err_fclk;
+ }
+
+ fclk_rate = clk_get_rate(fclk);
+ if (fclk_rate > 200000000) {
+ printk(KERN_INFO
+ "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+ __func__, fclk_rate / 1000000);
+ s3c2412_cpufreq_info.max.fclk = 266000000;
+ s3c2412_cpufreq_info.max.hclk = 133000000;
+ s3c2412_cpufreq_info.max.pclk = 66000000;
+ }
+
+ armclk = clk_get(NULL, "armclk");
+ if (IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+ goto err_armclk;
+ }
+
+ xtal = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal)) {
+ printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+ goto err_xtal;
+ }
+
+ return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+ clk_put(armclk);
+err_armclk:
+ clk_put(fclk);
+err_fclk:
+ clk_put(hclk);
+
+ return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+ .add = s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass,
+ &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba6..bef39f7 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
+ {
+ .virtual = (unsigned long)S3C2412_VA_SSMC,
+ .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)S3C2412_VA_EBI,
+ .pfn = __phys_to_pfn(S3C2412_PA_EBI),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
};
/* uart registration process */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec..8ae1b28 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
+ select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,8 @@
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
+ select S3C2440_XTAL_12000000
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +55,7 @@
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
+ select S3C2440_XTAL_16934400
select PM_H1940 if PM
help
Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +63,7 @@
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
+ select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
help
@@ -67,6 +72,7 @@
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
+ select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +81,7 @@
bool "SMDK2440 with S3C2440 CPU module"
depends on ARCH_S3C2440
default y if ARCH_S3C2440
+ select S3C2440_XTAL_16934400
select CPU_S3C2440
config MACH_AT2440EVB
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b..2105a41 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
+#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
@@ -351,6 +352,12 @@
&s3c24xx_uclk,
};
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
static void __init osiris_map_io(void)
{
unsigned long flags;
@@ -402,6 +409,8 @@
s3c_i2c0_set_platdata(NULL);
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
i2c_register_board_info(0, osiris_i2c_devs,
ARRAY_SIZE(osiris_i2c_devs));
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a011327..79e4d93 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
#define S3C_PA_UART S3C24A0_PA_UART
#define S3C_PA_IIC S3C24A0_PA_IIC
+#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d99..fc8b223 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,18 +38,21 @@
#define S3C_VA_UART2 S3C_VA_UARTx(2)
#define S3C_VA_UART3 S3C_VA_UARTx(3)
+#define S3C64XX_PA_NAND (0x70200000)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_AC97 (0x7F001000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_IISV4 (0x7F00D000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -57,7 +60,7 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
@@ -72,6 +75,7 @@
#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_NAND S3C64XX_PA_NAND
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887..b42bdd0f 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
}
void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f..f9d0f09 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@
select S3C64XX_SETUP_I2C1
help
Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C64XX_SETUP_FB_24BPP
+ select HAVE_PWM
+ help
+ Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac..3e48c3d 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904d..9b67c66 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
}
void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 0000000..c574105
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+ if (!ret)
+ ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+ return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+ /*
+ * translate from CIELUV/CIELAB L*->brightness, E.G. from
+ * perceived luminance to light output. Assumes range 0..25600
+ */
+ if (brightness < 0x800) {
+ /* Y = Yn * L / 903.3 */
+ brightness = (100*256 * brightness + 231245/2) / 231245;
+ } else {
+ /* Y = Yn * ((L + 16) / 116 )^3 */
+ int t = (brightness*4 + 16*1024 + 58)/116;
+ brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+ }
+
+ gpio_set_value(S3C64XX_GPB(4), brightness);
+
+ return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+ gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 100 * 256,
+ .dft_brightness = 40 * 256,
+ .pwm_period_ns = 1000000000 / (100 * 256 * 20),
+ .init = hmt_bl_init,
+ .notify = hmt_bl_notify,
+ .exit = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[1].dev,
+ .platform_data = &hmt_backlight_data,
+ },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &hmt_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "uboot-env1",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+ [2] = {
+ .name = "uboot-env2",
+ .size = SZ_256K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [4] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(hmt_nand_part),
+ .partitions = hmt_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(hmt_nand_sets),
+ .sets = hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+ { /* left function keys */
+ .name = "left:blue",
+ .gpio = S3C64XX_GPO(12),
+ .default_trigger = "default-on",
+ },
+ { /* right function keys - red */
+ .name = "right:red",
+ .gpio = S3C64XX_GPO(13),
+ },
+ { /* right function keys - green */
+ .name = "right:green",
+ .gpio = S3C64XX_GPO(14),
+ },
+ { /* right function keys - blue */
+ .name = "right:blue",
+ .gpio = S3C64XX_GPO(15),
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+ .num_leds = ARRAY_SIZE(hmt_leds),
+ .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &s3c_device_usb,
+ &s3c_device_timer[1],
+ &hmt_backlight_device,
+ &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+ s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&hmt_lcd_pdata);
+ s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+ gpio_request(S3C64XX_GPC(7), "usb power");
+ gpio_direction_output(S3C64XX_GPC(7), 0);
+ gpio_request(S3C64XX_GPM(0), "usb power");
+ gpio_direction_output(S3C64XX_GPM(0), 1);
+ gpio_request(S3C64XX_GPK(7), "usb power");
+ gpio_direction_output(S3C64XX_GPK(7), 1);
+ gpio_request(S3C64XX_GPF(13), "usb power");
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+
+ platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+ /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = hmt_map_io,
+ .init_machine = hmt_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636..55e9bbf 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@
&s3c_device_i2c0,
};
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
static void __init ncp_map_io(void)
{
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7de..ea51dbe 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
};
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 0000000..b1a4ba5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+ bool
+ select CPU_S5PC100_INIT
+ select CPU_S5PC100_CLOCK
+ help
+ Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+ bool "SMDKC100"
+ select CPU_S5PC100
+ select S5PC1XX_SETUP_I2C1
+ help
+ Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 0000000..afc89b3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100) += cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 0000000..0e71889
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+ /* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s5pc1xx_register_clocks();
+ s5pc100_register_clocks();
+ s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+ u32 vic_valid[] = {~0, ~0, ~0};
+
+ /* VIC0, VIC1, and VIC2 are fully populated. */
+ s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+ .name = "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+ .cls = &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+ return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+ printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+ return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 0000000..9d142cc
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 0000000..6713193
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =S3C_VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S3C_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 0000000..ad28d8e
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 0000000..c74fc93
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR (8)
+#define S5PC1XX_GPIO_A1_NR (5)
+#define S5PC1XX_GPIO_B_NR (8)
+#define S5PC1XX_GPIO_C_NR (5)
+#define S5PC1XX_GPIO_D_NR (7)
+#define S5PC1XX_GPIO_E0_NR (8)
+#define S5PC1XX_GPIO_E1_NR (6)
+#define S5PC1XX_GPIO_F0_NR (8)
+#define S5PC1XX_GPIO_F1_NR (8)
+#define S5PC1XX_GPIO_F2_NR (8)
+#define S5PC1XX_GPIO_F3_NR (4)
+#define S5PC1XX_GPIO_G0_NR (8)
+#define S5PC1XX_GPIO_G1_NR (3)
+#define S5PC1XX_GPIO_G2_NR (7)
+#define S5PC1XX_GPIO_G3_NR (7)
+#define S5PC1XX_GPIO_H0_NR (8)
+#define S5PC1XX_GPIO_H1_NR (8)
+#define S5PC1XX_GPIO_H2_NR (8)
+#define S5PC1XX_GPIO_H3_NR (8)
+#define S5PC1XX_GPIO_I_NR (8)
+#define S5PC1XX_GPIO_J0_NR (8)
+#define S5PC1XX_GPIO_J1_NR (5)
+#define S5PC1XX_GPIO_J2_NR (8)
+#define S5PC1XX_GPIO_J3_NR (8)
+#define S5PC1XX_GPIO_J4_NR (4)
+#define S5PC1XX_GPIO_K0_NR (8)
+#define S5PC1XX_GPIO_K1_NR (6)
+#define S5PC1XX_GPIO_K2_NR (8)
+#define S5PC1XX_GPIO_K3_NR (8)
+#define S5PC1XX_GPIO_MP00_NR (8)
+#define S5PC1XX_GPIO_MP01_NR (8)
+#define S5PC1XX_GPIO_MP02_NR (8)
+#define S5PC1XX_GPIO_MP03_NR (8)
+#define S5PC1XX_GPIO_MP04_NR (5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S5PC1XX_GPIO_A0_START = 0,
+ S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+ S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+ S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+ S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+ S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+ S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+ S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+ S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+ S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+ S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+ S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+ S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+ S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+ S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+ S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+ S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+ S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+ S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+ S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+ S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+ S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+ S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+ S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+ S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+ S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+ S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+ S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+ S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+ S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+ S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+ S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+ S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+ S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 0000000..6b38618
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 0000000..622720d
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 0000000..9e9f391
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID (0xE0000000)
+#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS (0xE0100000)
+#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC (0xE4000000)
+#define S5PC100_VA_VIC S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET 0x100000
+#define S5PC100_VA_VIC_OFFSET 0x10000
+#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER (0xEA000000)
+#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART (0xEC000000)
+#define S5PC1XX_PA_UART S5PC100_PA_UART
+#define S5PC1XX_VA_UART S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC (0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM (0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART S5PC100_PA_UART
+#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0 (S3C_VA_UART + 0x0)
+#define S3C_VA_UART1 (S3C_VA_UART + 0x400)
+#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
+#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET 0x400
+#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 0000000..4b60d18
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 0000000..b34d2f7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 0000000..751ac15
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 0000000..e390143
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 0000000..d3de0f3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+ return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 0000000..01ccf53
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+ fifo_mask = S3C2440_UFSTAT_TXMASK;
+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 0000000..214093c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+ s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+ platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+ /* Maintainer: Byungho Min <bhmin@samsung.com> */
+ .phys_io = S5PC1XX_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5PC100_PA_SDRAM + 0x100,
+
+ .init_irq = s5pc100_init_irq,
+ .map_io = smdkc100_map_io,
+ .init_machine = smdkc100_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d39..585cc01 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@
mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
mmci_card->mmc0_plat_data.status = mmc_status;
+ mmci_card->mmc0_plat_data.gpio_wp = -1;
+ mmci_card->mmc0_plat_data.gpio_cd = -1;
mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 31093af..975eae4 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/cnt32_to_63.h>
@@ -371,6 +372,8 @@
static struct mmc_platform_data mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
};
/*
@@ -705,6 +708,16 @@
.remove = versatile_clcd_remove,
};
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = IRQ_GPIO1_START,
+};
+
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -767,8 +780,8 @@
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 0000000..94ff276
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30..bf44c61 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3)
#define IRQ_SIC_END 63
-#define NR_IRQS 64
+#define IRQ_GPIO0_START (IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END (IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START (IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END (IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START (IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END (IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START (IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END (IRQ_GPIO3_START + 31)
+
+#define NR_IRQS (IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0..9af8d81 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -43,6 +44,18 @@
static struct mmc_platform_data mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+ .gpio_base = 24,
+ .irq_base = IRQ_GPIO3_START,
};
#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
@@ -70,8 +83,8 @@
AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
-AMBA_DEVICE(gpio3, "dev:e7", GPIO3, NULL);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178f..69bab32 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,16 @@
help
Support for W90P910 of Nuvoton W90X900 CPUs.
+config CPU_NUC950
+ bool
+ help
+ Support for NUCP950 of Nuvoton NUC900 CPUs.
+
+config CPU_NUC960
+ bool
+ help
+ Support for NUCP960 of Nuvoton NUC900 CPUs.
+
menu "W90P910 Machines"
config MACH_W90P910EVB
@@ -16,4 +26,24 @@
endmenu
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+ bool "Nuvoton NUC950 Evaluation Board"
+ select CPU_NUC950
+ help
+ Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+ bool "Nuvoton NUC960 Evaluation Board"
+ select CPU_NUC960
+ help
+ Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f..828c032 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,16 @@
# Object file lists.
-obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y := irq.o time.o mfp.o gpio.o clock.o
+obj-y += clksel.o dev.o cpu.o
# W90X900 CPU support files
-obj-$(CONFIG_CPU_W90P910) += w90p910.o
+obj-$(CONFIG_CPU_W90P910) += nuc910.o
+obj-$(CONFIG_CPU_NUC950) += nuc950.o
+obj-$(CONFIG_CPU_NUC960) += nuc960.o
# machine support
-obj-$(CONFIG_MACH_W90P910EVB) += mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB) += mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB) += mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB) += mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 0000000..3de4a52
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0 0x00
+#define PLL1 0x01
+#define OTHER 0x02
+#define EXT 0x03
+#define MSOFFSET 0x0C
+#define ATAOFFSET 0x0a
+#define LCDOFFSET 0x06
+#define AUDOFFSET 0x04
+#define CPUOFFSET 0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+ unsigned int clksel, offset;
+
+ clksel = __raw_readl(REG_CLKSEL);
+
+ if (strcmp(dev_id, "nuc900-ms") == 0)
+ offset = MSOFFSET;
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ offset = ATAOFFSET;
+ else if (strcmp(dev_id, "nuc900-lcd") == 0)
+ offset = LCDOFFSET;
+ else if (strcmp(dev_id, "nuc900-audio") == 0)
+ offset = AUDOFFSET;
+ else
+ offset = CPUOFFSET;
+
+ clksel &= ~(0x03 << offset);
+ clksel |= (clkval << offset);
+
+ __raw_writel(clksel, REG_CLKSEL);
+}
+
+void nuc900_clock_source(struct device *dev, unsigned char *src)
+{
+ unsigned int clkval;
+ const char *dev_id;
+
+ BUG_ON(!src);
+ clkval = 0;
+
+ mutex_lock(&clksel_sem);
+
+ if (dev)
+ dev_id = dev_name(dev);
+ else
+ dev_id = "cpufreq";
+
+ if (strcmp(src, "pll0") == 0)
+ clkval = PLL0;
+ else if (strcmp(src, "pll1") == 0)
+ clkval = PLL1;
+ else if (strcmp(src, "ext") == 0)
+ clkval = EXT;
+ else if (strcmp(src, "oth") == 0)
+ clkval = OTHER;
+
+ clock_source_select(dev_id, clkval);
+
+ mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(nuc900_clock_source);
+
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613..b785994b 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
#include "clock.h"
+#define SUBCLK 0x24
+
static DEFINE_SPINLOCK(clocks_lock);
int clk_enable(struct clk *clk)
@@ -53,7 +55,13 @@
}
EXPORT_SYMBOL(clk_disable);
-void w90x900_clk_enable(struct clk *clk, int enable)
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc900_clk_enable(struct clk *clk, int enable)
{
unsigned int clocks = clk->cken;
unsigned long clken;
@@ -68,6 +76,22 @@
__raw_writel(clken, W90X900_VA_CLKPWR);
}
+void nuc900_subclk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
void clks_register(struct clk_lookup *clks, size_t num)
{
int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda..f5816a0 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,7 +12,8 @@
#include <asm/clkdev.h>
-void w90x900_clk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
void clks_register(struct clk_lookup *clks, size_t num);
struct clk {
@@ -23,10 +24,17 @@
#define DEFINE_CLK(_name, _ctrlbit) \
struct clk clk_##_name = { \
- .enable = w90x900_clk_enable, \
+ .enable = nuc900_clk_enable, \
.cken = (1 << _ctrlbit), \
}
+#define DEFINE_SUBCLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = nuc900_subclk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+
#define DEF_CLKLOOK(_clk, _devname, _conname) \
{ \
.clk = _clk, \
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 0000000..921cef9
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+ IODESC_ENT(IRQ),
+ IODESC_ENT(GCR),
+ IODESC_ENT(UART),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+ DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+ DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+ DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+ DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+ DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+ DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+ DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+ DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+ DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+ DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+ DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+ DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+ DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+ DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+ DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+ DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+ DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+ DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+ DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+ DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+ NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = nuc900_uart_data,
+ },
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+ unsigned int pllclk, ahbclk, apbclk, val;
+
+ pllclk = 0;
+ ahbclk = 0;
+ apbclk = 0;
+
+ switch (cpufreq) {
+ case 66:
+ pllclk = PLL_66MHZ;
+ ahbclk = AHB_CPUCLK_1_1;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 100:
+ pllclk = PLL_100MHZ;
+ ahbclk = AHB_CPUCLK_1_1;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 120:
+ pllclk = PLL_120MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 166:
+ pllclk = PLL_166MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+
+ case 200:
+ pllclk = PLL_200MHZ;
+ ahbclk = AHB_CPUCLK_1_2;
+ apbclk = APB_AHB_1_2;
+ break;
+ }
+
+ __raw_writel(pllclk, REG_PLLCON0);
+
+ val = __raw_readl(REG_CLKDIV);
+ val &= ~(0x03 << 24 | 0x03 << 26);
+ val |= (ahbclk << 24 | apbclk << 26);
+ __raw_writel(val, REG_CLKDIV);
+
+ return 0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+ unsigned long cpufreq, val;
+
+ if (!*str)
+ return 0;
+
+ strict_strtoul(str, 0, &cpufreq);
+
+ nuc900_clock_source(NULL, "ext");
+
+ nuc900_set_clkval(cpufreq);
+
+ mdelay(1);
+
+ val = __raw_readl(REG_CKSKEW);
+ val &= ~0xff;
+ val |= DEFAULTSKEW;
+ __raw_writel(val, REG_CKSKEW);
+
+ nuc900_clock_source(NULL, "pll0");
+
+ return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ unsigned long idcode = 0x0;
+
+ iotable_init(mach_desc, mach_size);
+ iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+ idcode = __raw_readl(NUC900PDID);
+ if (idcode == NUC910_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+ else if (idcode == NUC920_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+ else if (idcode == NUC950_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+ else if (idcode == NUC960_CPUID)
+ printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+ clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dba..4d58ba1 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -24,29 +24,7 @@
.type = MT_DEVICE, \
}
-/*Cpu identifier register*/
-
-#define W90X900PDID W90X900_VA_GCR
-#define W90P910_CPUID 0x02900910
-#define W90P920_CPUID 0x02900920
-#define W90P950_CPUID 0x02900950
-#define W90N960_CPUID 0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-
-#define W90X900_8250PORT(name) \
+#define NUC900_8250PORT(name) \
{ \
.membase = name##_BA, \
.mapbase = name##_PA, \
@@ -56,3 +34,26 @@
.iotype = UPIO_MEM, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
+
+/*Cpu identifier register*/
+
+#define NUC900PDID W90X900_VA_GCR
+#define NUC910_CPUID 0x02900910
+#define NUC920_CPUID 0x02900920
+#define NUC950_CPUID 0x02900950
+#define NUC960_CPUID 0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 0000000..2a6f98d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE 0xA0000000
+#define NUC900_FLASH_SIZE 0x400000
+#define SPIOFFSET 0x200
+#define SPIOREG_SIZE 0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+ .width = 2,
+ .parts = nuc900_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+ {
+ .start = NUC900_FLASH_BASE,
+ .end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nuc900_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nuc900_flash_data,
+ },
+ .resource = nuc900_flash_resources,
+ .num_resources = ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBEHCIHOST,
+ .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+ .name = "nuc900-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource),
+ .resource = nuc900_usb_ehci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ehci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBOHCIHOST,
+ .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+ .name = "nuc900-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource),
+ .resource = nuc900_usb_ohci_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_usb_ohci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBDEV,
+ .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+ .name = "nuc900-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_usbgadget_resource),
+ .resource = nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_EMC,
+ .end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EMCTX,
+ .end = IRQ_EMCTX,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_EMCRX,
+ .end = IRQ_EMCRX,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+ .name = "nuc900-emc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_emc_resource),
+ .resource = nuc900_emc_resource,
+ .dev = {
+ .dma_mask = &nuc900_device_emc_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_I2C + SPIOFFSET,
+ .end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_spi = {
+ .name = "nuc900-spi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_spi_resource),
+ .resource = nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x0100000,
+ .offset = 0,
+ },
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+ .name = "m25p80",
+ .parts = nuc900_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+ .type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &nuc900_spi_flash_data,
+ .mode = SPI_MODE_0,
+ },
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+ [0] = {
+ .start = W90X900_PA_TIMER,
+ .end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_WDT,
+ .end = IRQ_WDT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device nuc900_device_wdt = {
+ .name = "nuc900-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_wdt_resource),
+ .resource = nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_RTC,
+ .end = W90X900_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_rtc = {
+ .name = "nuc900-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_rtc_resource),
+ .resource = nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+ [0] = {
+ .start = W90X900_PA_ADC,
+ .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device nuc900_device_ts = {
+ .name = "nuc900-ts",
+ .id = -1,
+ .resource = nuc900_ts_resource,
+ .num_resources = ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_FMI,
+ .end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FMI,
+ .end = IRQ_FMI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device nuc900_device_fmi = {
+ .name = "nuc900-fmi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_fmi_resource),
+ .resource = nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_KPI,
+ .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KPI,
+ .end = IRQ_KPI,
+ .flags = IORESOURCE_IRQ,
+ }
+
+};
+
+struct platform_device nuc900_device_kpi = {
+ .name = "nuc900-kpi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(nuc900_kpi_resource),
+ .resource = nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+ &nuc900_serial_device,
+ &nuc900_flash_device,
+ &nuc900_device_usb_ehci,
+ &nuc900_device_usb_ohci,
+ &nuc900_device_usbgadget,
+ &nuc900_device_emc,
+ &nuc900_device_spi,
+ &nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+ platform_add_devices(device, size);
+ platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+ spi_register_board_info(nuc900_spi_board_info,
+ ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0df..ba05aec 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
/*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
*
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -30,31 +30,31 @@
#define GPIO_IN (0x0C)
#define GROUPINERV (0x10)
#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio) \
{ \
.chip = { \
.label = name, \
- .direction_input = w90p910_dir_input, \
- .direction_output = w90p910_dir_output, \
- .get = w90p910_gpio_get, \
- .set = w90p910_gpio_set, \
+ .direction_input = nuc900_dir_input, \
+ .direction_output = nuc900_dir_output, \
+ .get = nuc900_gpio_get, \
+ .set = nuc900_gpio_set, \
.base = base_gpio, \
.ngpio = nr_gpio, \
} \
}
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase; /* Base of group register*/
spinlock_t gpio_lock;
};
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
unsigned int regval;
regval = __raw_readl(pio);
@@ -63,14 +63,14 @@
return (regval != 0);
}
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
@@ -81,36 +81,36 @@
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
}
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval &= ~GPIO_GPIO(offset);
__raw_writel(regval, pio);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
{
- struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
- void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
- void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+ void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+ void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
unsigned int regval;
unsigned long flags;
- spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+ spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
regval = __raw_readl(pio);
regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@
__raw_writel(regval, outreg);
- spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+ spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
return 0;
}
-static struct w90p910_gpio_chip w90p910_gpio[] = {
- W90P910_GPIO_CHIP("GROUPC", 0, 16),
- W90P910_GPIO_CHIP("GROUPD", 16, 10),
- W90P910_GPIO_CHIP("GROUPE", 26, 14),
- W90P910_GPIO_CHIP("GROUPF", 40, 10),
- W90P910_GPIO_CHIP("GROUPG", 50, 17),
- W90P910_GPIO_CHIP("GROUPH", 67, 8),
- W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+ NUC900_GPIO_CHIP("GROUPC", 0, 16),
+ NUC900_GPIO_CHIP("GROUPD", 16, 10),
+ NUC900_GPIO_CHIP("GROUPE", 26, 14),
+ NUC900_GPIO_CHIP("GROUPF", 40, 10),
+ NUC900_GPIO_CHIP("GROUPG", 50, 17),
+ NUC900_GPIO_CHIP("GROUPH", 67, 8),
+ NUC900_GPIO_CHIP("GROUPI", 75, 17),
};
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
{
unsigned i;
- struct w90p910_gpio_chip *gpio_chip;
+ struct nuc900_gpio_chip *gpio_chip;
for (i = 0; i < nr_group; i++) {
- gpio_chip = &w90p910_gpio[i];
+ gpio_chip = &nuc900_gpio[i];
spin_lock_init(&gpio_chip->gpio_lock);
gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8..516d6b4 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
#define REG_CLKEN1 (CLK_BA + 0x24)
#define REG_CLKDIV1 (CLK_BA + 0x28)
+/* Define PLL freq setting */
+#define PLL_DISABLE 0x12B63
+#define PLL_66MHZ 0x2B63
+#define PLL_100MHZ 0x4F64
+#define PLL_120MHZ 0x4F63
+#define PLL_166MHZ 0x4124
+#define PLL_200MHZ 0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define AHB_CPUCLK_1_1 0x00
+#define AHB_CPUCLK_1_2 0x01
+#define AHB_CPUCLK_1_4 0x02
+#define AHB_CPUCLK_1_8 0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2 0x01
+#define APB_AHB_1_4 0x02
+#define APB_AHB_1_8 0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW 0x48
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 0000000..b68455e
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA W90X900_VA_EBI
+#define REG_EBICON (EBI_BA + 0x00)
+#define REG_ROMCON (EBI_BA + 0x04)
+#define REG_SDCONF0 (EBI_BA + 0x08)
+#define REG_SDCONF1 (EBI_BA + 0x0C)
+#define REG_SDTIME0 (EBI_BA + 0x10)
+#define REG_SDTIME1 (EBI_BA + 0x14)
+#define REG_EXT0CON (EBI_BA + 0x18)
+#define REG_EXT1CON (EBI_BA + 0x1C)
+#define REG_EXT2CON (EBI_BA + 0x20)
+#define REG_EXT3CON (EBI_BA + 0x24)
+#define REG_EXT4CON (EBI_BA + 0x28)
+#define REG_CKSKEW (EBI_BA + 0x2C)
+
+#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc19..0ce9d8e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
@@ -29,9 +28,114 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-static void w90x900_irq_mask(unsigned int irq)
+struct group_irq {
+ unsigned long gpen;
+ unsigned int enabled;
+ void (*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num) \
+struct group_irq group_##_name = { \
+ .enable = nuc900_group_enable, \
+ .gpen = ((1 << _num) - 1) << _ctrlbit, \
+ }
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&groupirq_lock, flags);
+ if (group_irq->enabled++ == 0)
+ (group_irq->enable)(group_irq, 1);
+ spin_unlock_irqrestore(&groupirq_lock, flags);
+
+ return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
+{
+ unsigned long flags;
+
+ WARN_ON(group_irq->enabled == 0);
+
+ spin_lock_irqsave(&groupirq_lock, flags);
+ if (--group_irq->enabled == 0)
+ (group_irq->enable)(group_irq, 0);
+ spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
+{
+ unsigned int groupen = gpirq->gpen;
+ unsigned long regval;
+
+ regval = __raw_readl(REG_AIC_GEN);
+
+ if (enable)
+ regval |= groupen;
+ else
+ regval &= ~groupen;
+
+ __raw_writel(regval, REG_AIC_GEN);
+}
+
+static void nuc900_irq_mask(unsigned int irq)
+{
+ struct group_irq *group_irq;
+
+ group_irq = NULL;
+
__raw_writel(1 << irq, REG_AIC_MDCR);
+
+ switch (irq) {
+ case IRQ_GROUP0:
+ group_irq = &group_nirq0;
+ break;
+
+ case IRQ_GROUP1:
+ group_irq = &group_nirq1;
+ break;
+
+ case IRQ_USBH:
+ group_irq = &group_usbh;
+ break;
+
+ case IRQ_T_INT_GROUP:
+ group_irq = &group_ottimer;
+ break;
+
+ case IRQ_GDMAGROUP:
+ group_irq = &group_gdma;
+ break;
+
+ case IRQ_SCGROUP:
+ group_irq = &group_sc;
+ break;
+
+ case IRQ_I2CGROUP:
+ group_irq = &group_i2c;
+ break;
+
+ case IRQ_P2SGROUP:
+ group_irq = &group_ps2;
+ break;
+ }
+
+ if (group_irq)
+ group_irq_disable(group_irq);
}
/*
@@ -39,37 +143,71 @@
* to REG_AIC_EOSCR for ACK
*/
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
{
__raw_writel(0x01, REG_AIC_EOSCR);
}
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
{
- unsigned long mask;
+ struct group_irq *group_irq;
- if (irq == IRQ_T_INT_GROUP) {
- mask = __raw_readl(REG_AIC_GEN);
- __raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
- __raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
- }
+ group_irq = NULL;
+
__raw_writel(1 << irq, REG_AIC_MECR);
+
+ switch (irq) {
+ case IRQ_GROUP0:
+ group_irq = &group_nirq0;
+ break;
+
+ case IRQ_GROUP1:
+ group_irq = &group_nirq1;
+ break;
+
+ case IRQ_USBH:
+ group_irq = &group_usbh;
+ break;
+
+ case IRQ_T_INT_GROUP:
+ group_irq = &group_ottimer;
+ break;
+
+ case IRQ_GDMAGROUP:
+ group_irq = &group_gdma;
+ break;
+
+ case IRQ_SCGROUP:
+ group_irq = &group_sc;
+ break;
+
+ case IRQ_I2CGROUP:
+ group_irq = &group_i2c;
+ break;
+
+ case IRQ_P2SGROUP:
+ group_irq = &group_ps2;
+ break;
+ }
+
+ if (group_irq)
+ group_irq_enable(group_irq);
}
-static struct irq_chip w90x900_irq_chip = {
- .ack = w90x900_irq_ack,
- .mask = w90x900_irq_mask,
- .unmask = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+ .ack = nuc900_irq_ack,
+ .mask = nuc900_irq_mask,
+ .unmask = nuc900_irq_unmask,
};
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
{
int irqno;
__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
- set_irq_chip(irqno, &w90x900_irq_chip);
+ set_irq_chip(irqno, &nuc900_irq_chip);
set_irq_handler(irqno, handle_level_irq);
set_irq_flags(irqno, IRQF_VALID);
}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 0000000..ec05bda
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+ nuc910_map_io();
+ nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+ nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc910evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc910evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 0000000..cef903b
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+ nuc950_map_io();
+ nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+ nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc950evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc950evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 0000000..e3a46f1
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+ nuc960_map_io();
+ nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+ nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+ /* Maintainer: Wan ZongShun */
+ .phys_io = W90X900_PA_UART,
+ .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+ .boot_params = 0,
+ .map_io = nuc960evb_map_io,
+ .init_irq = nuc900_init_irq,
+ .init_machine = nuc960evb_init,
+ .timer = &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 7a62bd3..0000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE 0xA0000000
-#define W90P910_FLASH_SIZE 0x400000
-
-static struct mtd_partition w90p910_flash_partitions[] = {
- {
- .name = "NOR Partition 1 for kernel (960K)",
- .size = 0xF0000,
- .offset = 0x10000,
- },
- {
- .name = "NOR Partition 2 for image (1M)",
- .size = 0x100000,
- .offset = 0x100000,
- },
- {
- .name = "NOR Partition 3 for user (2M)",
- .size = 0x200000,
- .offset = 0x00200000,
- }
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
- .width = 2,
- .parts = w90p910_flash_partitions,
- .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
- {
- .start = W90P910_FLASH_BASE,
- .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device w90p910_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &w90p910_flash_data,
- },
- .resource = w90p910_flash_resources,
- .num_resources = ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBEHCIHOST,
- .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
- .name = "w90x900-ehci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource),
- .resource = w90x900_usb_ehci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ehci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
- [0] = {
- .start = W90X900_PA_USBOHCIHOST,
- .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
- .name = "w90x900-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource),
- .resource = w90x900_usb_ohci_resource,
- .dev = {
- .dma_mask = &w90x900_device_usb_ohci_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
- [0] = {
- .start = W90X900_PA_ADC,
- .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_ts = {
- .name = "w90x900-ts",
- .id = -1,
- .resource = w90x900_ts_resource,
- .num_resources = ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
- [0] = {
- .start = W90X900_PA_RTC,
- .end = W90X900_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device w90x900_device_rtc = {
- .name = "w90x900-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_rtc_resource),
- .resource = w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
- [0] = {
- .start = W90X900_PA_KPI,
- .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_KPI,
- .end = IRQ_KPI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device w90x900_device_kpi = {
- .name = "w90x900-kpi",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_kpi_resource),
- .resource = w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
- [0] = {
- .start = W90X900_PA_USBDEV,
- .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device w90x900_device_usbgadget = {
- .name = "w90x900-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource),
- .resource = w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
- &w90p910_serial_device,
- &w90p910_flash_device,
- &w90x900_device_usb_ehci,
- &w90x900_device_usb_ohci,
- &w90x900_device_ts,
- &w90x900_device_rtc,
- &w90x900_device_kpi,
- &w90x900_device_usbgadget,
-};
-
-static void __init w90p910evb_map_io(void)
-{
- w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
- w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
- platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
- /* Maintainer: Wan ZongShun */
- .phys_io = W90X900_PA_UART,
- .io_pg_offst = (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
- .boot_params = 0,
- .map_io = w90p910evb_map_io,
- .init_irq = w90x900_init_irq,
- .init_machine = w90p910evb_init,
- .timer = &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index a3520fe..0000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL (W90X900_VA_GCR + 0xC)
-
-#define GPSELF (0x01 << 1)
-
-#define GPSELC (0x03 << 2)
-#define ENKPI (0x02 << 2)
-#define ENNAND (0x01 << 2)
-
-#define GPSELEI0 (0x01 << 26)
-#define GPSELEI1 (0x01 << 27)
-
-static DECLARE_MUTEX(mfp_sem);
-
-void mfp_set_groupf(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-emc") == 0)
- mfpen |= GPSELF;/*enable mac*/
- else
- mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-lcd") == 0)
- mfpen |= GPSELC;/*enable lcd*/
- else if (strcmp(dev_id, "w90p910-kpi") == 0) {
- mfpen &= (~GPSELC);/*enable kpi*/
- mfpen |= ENKPI;
- } else if (strcmp(dev_id, "w90p910-nand") == 0) {
- mfpen &= (~GPSELC);/*enable nand*/
- mfpen |= ENNAND;
- } else
- mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev, int gpio)
-{
- unsigned long mfpen;
- const char *dev_id;
-
- BUG_ON(!dev);
-
- down(&mfp_sem);
-
- dev_id = dev_name(dev);
-
- mfpen = __raw_readl(REG_MFSEL);
-
- if (strcmp(dev_id, "w90p910-wdog") == 0)
- mfpen |= GPSELEI1;/*enable wdog*/
- else if (strcmp(dev_id, "w90p910-atapi") == 0)
- mfpen |= GPSELEI0;/*enable atapi*/
-
- __raw_writel(mfpen, REG_MFSEL);
-
- up(&mfp_sem);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 0000000..a47dc9a
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL (W90X900_VA_GCR + 0xC)
+
+#define GPSELF (0x01 << 1)
+
+#define GPSELC (0x03 << 2)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
+
+#define GPSELEI0 (0x01 << 26)
+#define GPSELEI1 (0x01 << 27)
+
+#define GPIOG0TO1 (0x03 << 14)
+#define GPIOG2TO3 (0x03 << 16)
+#define ENSPI (0x0a << 14)
+#define ENI2C0 (0x01 << 14)
+#define ENI2C1 (0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-emc") == 0)
+ mfpen |= GPSELF;/*enable mac*/
+ else
+ mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-lcd") == 0)
+ mfpen |= GPSELC;/*enable lcd*/
+ else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+ mfpen &= (~GPSELC);/*enable kpi*/
+ mfpen |= ENKPI;
+ } else if (strcmp(dev_id, "nuc900-nand") == 0) {
+ mfpen &= (~GPSELC);/*enable nand*/
+ mfpen |= ENNAND;
+ } else
+ mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ mfpen &= ~GPSELEI1;/*default gpio16*/
+
+ if (strcmp(dev_id, "nuc900-wdog") == 0)
+ mfpen |= GPSELEI1;/*enable wdog*/
+ else if (strcmp(dev_id, "nuc900-atapi") == 0)
+ mfpen |= GPSELEI0;/*enable atapi*/
+ else if (strcmp(dev_id, "nuc900-keypad") == 0)
+ mfpen &= ~GPSELEI0;/*enable keypad*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ mutex_lock(&mfp_mutex);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-spi") == 0) {
+ mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+ mfpen |= ENSPI;/*enable spi*/
+ } else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+ mfpen &= ~(GPIOG0TO1);
+ mfpen |= ENI2C0;/*enable i2c0*/
+ } else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+ mfpen &= ~(GPIOG2TO3);
+ mfpen |= ENI2C1;/*enable i2c1*/
+ } else {
+ mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+ }
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 0000000..656f03b
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+ &nuc900_device_ts,
+ &nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+ IODESC_ENT(USBEHCIHOST),
+ IODESC_ENT(USBOHCIHOST),
+ IODESC_ENT(KPI),
+ IODESC_ENT(USBDEV),
+ IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+ nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+ nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 0000000..83e9ba5
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 0000000..1495081
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+ &nuc900_device_kpi,
+ &nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+ nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+ nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 0000000..98a1148
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 0000000..8851a3a
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+ &nuc900_device_kpi,
+ &nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+ nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+ nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+ nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 0000000..f0c07cb
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f..4128af8 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
*
* Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
*
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
* All rights reserved.
*
* Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
#include <mach/map.h>
#include <mach/regs-timer.h>
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT 0x1f
+#define PERIOD (0x01 << 27)
+#define ONESHOT (0x00 << 27)
+#define COUNTEN (0x01 << 30)
+#define INTEN (0x01 << 29)
+
+#define TICKS_PER_SEC 100
+#define PRESCALE 0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
{
+ unsigned int val;
+
+ val = __raw_readl(REG_TCSR0);
+ val &= ~(0x03 << 27);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writel(timer0_load, REG_TICR0);
+ val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+
+ __raw_writel(val, REG_TCSR0);
+}
+
+static int nuc900_clockevent_setnextevent(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ unsigned int val;
+
+ __raw_writel(evt, REG_TICR0);
+
+ val = __raw_readl(REG_TCSR0);
+ val |= (COUNTEN | INTEN | PRESCALE);
+ __raw_writel(val, REG_TCSR0);
+
return 0;
}
+static struct clock_event_device nuc900_clockevent_device = {
+ .name = "nuc900-timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = nuc900_clockevent_setmode,
+ .set_next_event = nuc900_clockevent_setnextevent,
+ .rating = 300,
+};
+
/*IRQ handler for the timer*/
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *evt = &nuc900_clockevent_device;
+
__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction w90x900_timer_irq = {
- .name = "w90x900 Timer Tick",
+static struct irqaction nuc900_timer0_irq = {
+ .name = "nuc900-timer0",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = w90x900_timer_interrupt,
+ .handler = nuc900_timer0_interrupt,
};
-/*Set up timer reg.*/
-
-static void w90x900_timer_setup(void)
+static void __init nuc900_clockevents_init(unsigned int rate)
{
- __raw_writel(0, REG_TCSR0);
- __raw_writel(0, REG_TCSR1);
- __raw_writel(0, REG_TCSR2);
- __raw_writel(0, REG_TCSR3);
- __raw_writel(0, REG_TCSR4);
- __raw_writel(0x1F, REG_TISR);
- __raw_writel(15000000/(100 * 100), REG_TICR0);
- __raw_writel(0x68000063, REG_TCSR0);
+ nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+ nuc900_clockevent_device.shift);
+ nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+ &nuc900_clockevent_device);
+ nuc900_clockevent_device.cpumask = cpumask_of(0);
+
+ clockevents_register_device(&nuc900_clockevent_device);
}
-static void __init w90x900_timer_init(void)
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
{
- w90x900_timer_setup();
- setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+ return ~__raw_readl(REG_TDR1);
}
-struct sys_timer w90x900_timer = {
- .init = w90x900_timer_init,
- .offset = w90x900_gettimeoffset,
- .resume = w90x900_timer_setup
+static struct clocksource clocksource_nuc900 = {
+ .name = "nuc900-timer1",
+ .rating = 200,
+ .read = nuc900_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nuc900_clocksource_init(unsigned int rate)
+{
+ unsigned int val;
+
+ __raw_writel(0xffffffff, REG_TICR1);
+
+ val = __raw_readl(REG_TCSR1);
+ val |= (COUNTEN | PERIOD);
+ __raw_writel(val, REG_TCSR1);
+
+ clocksource_nuc900.mult =
+ clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+ clocksource_register(&clocksource_nuc900);
+}
+
+static void __init nuc900_timer_init(void)
+{
+ struct clk *ck_ext = clk_get(NULL, "ext");
+ unsigned int rate;
+
+ BUG_ON(IS_ERR(ck_ext));
+
+ rate = clk_get_rate(ck_ext);
+ clk_put(ck_ext);
+ rate = rate / (PRESCALE + 0x01);
+
+ /* set a known state */
+ __raw_writel(0x00, REG_TCSR0);
+ __raw_writel(0x00, REG_TCSR1);
+ __raw_writel(RESETINT, REG_TISR);
+ timer0_load = (rate / TICKS_PER_SEC);
+
+ setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
+ nuc900_clocksource_init(rate);
+ nuc900_clockevents_init(rate);
+}
+
+struct sys_timer nuc900_timer = {
+ .init = nuc900_timer_init,
};
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index 1c97e49..0000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
- IODESC_ENT(USBEHCIHOST),
- IODESC_ENT(USBOHCIHOST),
- IODESC_ENT(ADC),
- IODESC_ENT(RTC),
- IODESC_ENT(KPI),
- IODESC_ENT(USBDEV),
- /*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-
-static struct clk_lookup w90p910_clkregs[] = {
- DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
- DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
- DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
- DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
- DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
- DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
- DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
- DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
- DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
- DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
- DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
- DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
- DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
- DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
- DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
- DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
- W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = w90p910_uart_data,
- },
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
- idcode = __raw_readl(W90X900PDID);
- if (idcode != W90P910_CPUID)
- printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
- clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
- return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
- return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e..5fe595a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
default y
select OUTER_CACHE
help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d..b270d62 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@
#define __get8_unaligned_check(ins,val,addr,err) \
__asm__( \
- "1: "ins" %1, [%2], #1\n" \
+ ARM( "1: "ins" %1, [%2], #1\n" ) \
+ THUMB( "1: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -215,7 +217,9 @@
do { \
unsigned int err = 0, v = val, a = addr; \
__asm__( FIRST_BYTE_16 \
- "1: "ins" %1, [%2], #1\n" \
+ ARM( "1: "ins" %1, [%2], #1\n" ) \
+ THUMB( "1: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
@@ -245,11 +249,17 @@
do { \
unsigned int err = 0, v = val, a = addr; \
__asm__( FIRST_BYTE_32 \
- "1: "ins" %1, [%2], #1\n" \
+ ARM( "1: "ins" %1, [%2], #1\n" ) \
+ THUMB( "1: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
- "2: "ins" %1, [%2], #1\n" \
+ ARM( "2: "ins" %1, [%2], #1\n" ) \
+ THUMB( "2: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
- "3: "ins" %1, [%2], #1\n" \
+ ARM( "3: "ins" %1, [%2], #1\n" ) \
+ THUMB( "3: "ins" %1, [%2]\n" ) \
+ THUMB( " add %2, %2, #1\n" ) \
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff0..bda0ec3 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
*
* Flush the whole D-cache.
*
- * Corrupted registers: r0-r5, r7, r9-r11
+ * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
*
* - mm - mm_struct describing address space
*/
@@ -51,8 +51,12 @@
loop2:
mov r9, r4 @ create working copy of max way size
loop3:
- orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
- orr r11, r11, r7, lsl r2 @ factor index number into r11
+ ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11
+ THUMB( lsl r6, r9, r5 )
+ THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
+ ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11
+ THUMB( lsl r6, r7, r2 )
+ THUMB( orr r11, r11, r6 ) @ factor index number into r11
mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
subs r9, r9, #1 @ decrement the way
bge loop3
@@ -82,11 +86,13 @@
*
*/
ENTRY(v7_flush_kern_cache_all)
- stmfd sp!, {r4-r5, r7, r9-r11, lr}
+ ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} )
+ THUMB( stmfd sp!, {r4-r7, r9-r11, lr} )
bl v7_flush_dcache_all
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
- ldmfd sp!, {r4-r5, r7, r9-r11, lr}
+ ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} )
+ THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
mov pc, lr
ENDPROC(v7_flush_kern_cache_all)
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179..b30925f 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+ u64 mask = ISA_DMA_THRESHOLD;
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ return 0;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ return 0;
+ }
+ }
+
+ return mask;
+}
+
+#ifdef CONFIG_MMU
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
@@ -152,7 +179,8 @@
struct page *page;
struct arm_vm_region *c;
unsigned long order;
- u64 mask = ISA_DMA_THRESHOLD, limit;
+ u64 mask = get_coherent_dma_mask(dev);
+ u64 limit;
if (!consistent_pte[0]) {
printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@
return NULL;
}
- if (dev) {
- mask = dev->coherent_dma_mask;
-
- /*
- * Sanity check the DMA mask - it must be non-zero, and
- * must be able to be satisfied by a DMA allocation.
- */
- if (mask == 0) {
- dev_warn(dev, "coherent DMA mask is unset\n");
- goto no_page;
- }
-
- if ((~mask) & ISA_DMA_THRESHOLD) {
- dev_warn(dev, "coherent DMA mask %#llx is smaller "
- "than system GFP_DMA mask %#llx\n",
- mask, (unsigned long long)ISA_DMA_THRESHOLD);
- goto no_page;
- }
- }
+ if (!mask)
+ goto no_page;
/*
* Sanity check the allocation size.
@@ -267,6 +278,31 @@
*handle = ~0;
return NULL;
}
+#else /* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+ pgprot_t prot)
+{
+ void *virt;
+ u64 mask = get_coherent_dma_mask(dev);
+
+ if (!mask)
+ goto error;
+
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+ virt = kmalloc(size, gfp);
+ if (!virt)
+ goto error;
+
+ *handle = virt_to_dma(dev, virt);
+ return virt;
+
+error:
+ *handle = ~0;
+ return NULL;
+}
+#endif /* CONFIG_MMU */
/*
* Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@
static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size)
{
+ int ret = -ENXIO;
+#ifdef CONFIG_MMU
unsigned long flags, user_size, kern_size;
struct arm_vm_region *c;
- int ret = -ENXIO;
user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
@@ -334,6 +371,7 @@
vma->vm_page_prot);
}
}
+#endif /* CONFIG_MMU */
return ret;
}
@@ -358,6 +396,7 @@
* free a page as defined by the above mapping.
* Must not be called with IRQs disabled.
*/
+#ifdef CONFIG_MMU
void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
{
struct arm_vm_region *c;
@@ -444,6 +483,14 @@
__func__, cpu_addr);
dump_stack();
}
+#else /* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+ if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ return;
+ kfree(cpu_addr);
+}
+#endif /* CONFIG_MMU */
EXPORT_SYMBOL(dma_free_coherent);
/*
@@ -451,10 +498,12 @@
*/
static int __init consistent_init(void)
{
+ int ret = 0;
+#ifdef CONFIG_MMU
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
- int ret = 0, i = 0;
+ int i = 0;
u32 base = CONSISTENT_BASE;
do {
@@ -477,6 +526,7 @@
consistent_pte[i++] = pte;
base += (1 << PGDIR_SHIFT);
} while (base < CONSISTENT_END);
+#endif /* !CONFIG_MMU */
return ret;
}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb7..cc8829d 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,8 @@
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/highmem.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -23,6 +25,7 @@
#include "fault.h"
+#ifdef CONFIG_MMU
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -97,6 +100,10 @@
printk("\n");
}
+#else /* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif /* CONFIG_MMU */
/*
* Oops. The kernel tried to access some page that wasn't present.
@@ -171,6 +178,7 @@
__do_kernel_fault(mm, addr, fsr, regs);
}
+#ifdef CONFIG_MMU
#define VM_FAULT_BADMAP 0x010000
#define VM_FAULT_BADACCESS 0x020000
@@ -322,6 +330,13 @@
__do_kernel_fault(mm, addr, fsr, regs);
return 0;
}
+#else /* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ return 0;
+}
+#endif /* CONFIG_MMU */
/*
* First Level Translation Fault Handler
@@ -340,6 +355,7 @@
* interrupt or a critical region, and should only copy the information
* from the master page table, nothing more.
*/
+#ifdef CONFIG_MMU
static int __kprobes
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
@@ -378,6 +394,14 @@
do_bad_area(addr, fsr, regs);
return 0;
}
+#else /* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ return 0;
+}
+#endif /* CONFIG_MMU */
/*
* Some section permission faults need to be handled gracefully.
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c07222e..575f3ad 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -144,7 +144,14 @@
* page. This ensures that data in the physical page is mutually
* coherent with the kernels mapping.
*/
- __cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+ /*
+ * kmap_atomic() doesn't set the page virtual address, and
+ * kunmap_atomic() takes care of cache flushing already.
+ */
+ if (page_address(page))
+#endif
+ __cpuc_flush_dcache_page(page_address(page));
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index a34954d..73cae57 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -40,11 +40,16 @@
{
unsigned int idx;
unsigned long vaddr;
+ void *kmap;
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
+ kmap = kmap_high_get(page);
+ if (kmap)
+ return kmap;
+
idx = type + KM_TYPE_NR * smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@
#else
(void) idx; /* to kill a warning */
#endif
+ } else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+ /* this address was obtained through kmap_high_get() */
+ kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
}
pagefault_enable();
}
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3a7279c..ea36186 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
+#include <linux/sort.h>
#include <linux/highmem.h>
#include <asm/mach-types.h>
@@ -349,12 +350,43 @@
free_area_init_node(node, zone_size, min, zhole_size);
}
+#ifndef CONFIG_SPARSEMEM
+int pfn_valid(unsigned long pfn)
+{
+ struct meminfo *mi = &meminfo;
+ unsigned int left = 0, right = mi->nr_banks;
+
+ do {
+ unsigned int mid = (right + left) / 2;
+ struct membank *bank = &mi->bank[mid];
+
+ if (pfn < bank_pfn_start(bank))
+ right = mid;
+ else if (pfn >= bank_pfn_end(bank))
+ left = mid + 1;
+ else
+ return 1;
+ } while (left < right);
+ return 0;
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
void __init bootmem_init(void)
{
struct meminfo *mi = &meminfo;
unsigned long min, max_low, max_high;
int node, initrd_node;
+ sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
+
/*
* Locate which node contains the ramdisk image, if any.
*/
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc..900811c 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
#include <asm/cacheflush.h>
#include <asm/sections.h>
#include <asm/page.h>
+#include <asm/setup.h>
#include <asm/mach/arch.h>
#include "mm.h"
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f72..7d63bea 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,19 +77,15 @@
* Sanity check the PTE configuration for the code below - which makes
* certain assumptions about how these bits are layed out.
*/
+#ifdef CONFIG_MMU
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
#endif
+#endif /* CONFIG_MMU */
/*
* The ARMv6 and ARMv7 set_pte_ext translation function.
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d..f3fa1c3 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@
*/
ENTRY(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
- str r1, [r0], #-2048 @ linux version
+ ARM( str r1, [r0], #-2048 ) @ linux version
+ THUMB( str r1, [r0] ) @ linux version
+ THUMB( sub r0, r0, #2048 )
bic r3, r1, #0x000003f0
bic r3, r3, #PTE_TYPE_MASK
@@ -232,7 +234,6 @@
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
-#endif
/*
* Memory region attributes with SCTLR.TRE=1
*
@@ -265,6 +266,7 @@
ldr r6, =0x40e040e0 @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
+#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
@@ -273,6 +275,7 @@
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
+ THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b741..ca5c7c2 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@
config ARCH_MX1
bool "MX1-based"
select CPU_ARM920T
+ select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX1 family
@@ -19,6 +20,13 @@
help
This enables support for systems based on the Freescale i.MX2 family
+config ARCH_MX25
+ bool "MX25-based"
+ select CPU_ARM926T
+ select COMMON_CLKDEV
+ help
+ This enables support for systems based on the Freescale i.MX25 family
+
config ARCH_MX3
bool "MX3-based"
select CPU_V6
@@ -26,11 +34,20 @@
help
This enables support for systems based on the Freescale i.MX3 family
+config ARCH_MXC91231
+ bool "MXC91231-based"
+ select CPU_V6
+ select COMMON_CLKDEV
+ help
+ This enables support for systems based on the Freescale MXC91231 family
+
endchoice
source "arch/arm/mach-mx1/Kconfig"
source "arch/arm/mach-mx2/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
endmenu
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e1356..9e8fbd5 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
#include <linux/string.h>
#include <mach/clock.h>
+#include <mach/hardware.h>
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
@@ -47,76 +48,6 @@
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
- const char *str;
-
- if (id == NULL)
- return clk;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- str = strrchr(id, '.');
- if (str) {
- int cnt = str - id;
- str++;
- idno = simple_strtol(str, NULL, 10);
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strlen(p->name) == cnt &&
- strncmp(id, p->name, cnt) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
static void __clk_disable(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
@@ -193,16 +124,6 @@
}
EXPORT_SYMBOL(clk_get_rate);
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
/* Round the requested clock rate to the nearest supported
* rate that is less than or equal to the requested rate.
* This is dependent on the clock's current parent.
@@ -265,80 +186,6 @@
}
EXPORT_SYMBOL(clk_get_parent);
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- struct clk *clkp;
- char *p = page;
- int len;
-
- list_for_each_entry(clkp, &clocks, node) {
- p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
- clk_get_rate(clkp), clkp->usecount);
- if (clkp->parent)
- p += sprintf(p, ", %s-%d\n", clkp->parent->name,
- clkp->parent->id);
- else
- p += sprintf(p, "\n");
- }
-
- len = (p - page) - off;
- if (len < 0)
- len = 0;
-
- *eof = (len <= count) ? 1 : 0;
- *start = page + off;
-
- return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
- struct proc_dir_entry *res;
-
- res = create_proc_read_entry("cpu/clocks", 0, NULL,
- mxc_clock_read_proc, NULL);
- if (!res) {
- printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
- return -ENOMEM;
- }
- return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
/*
* Get the resulting clock rate from a PLL register value and the input
* frequency. PLLs with this register layout can at least be found on
@@ -363,12 +210,11 @@
mfn_abs = mfn;
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
- if (mfn >= 0x200) {
- mfn |= 0xFFFFFE00;
- mfn_abs = -mfn;
- }
-#endif
+ /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+ * 2's complements number
+ */
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+ mfn_abs = 0x400 - mfn;
freq *= 2;
freq /= pd + 1;
@@ -376,8 +222,10 @@
ll = (unsigned long long)freq * mfn_abs;
do_div(ll, mfd + 1);
- if (mfn < 0)
+
+ if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
ll = -ll;
+
ll = (freq * mfi) + ll;
return ll;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d96..cfc4a8b 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
static struct mxc_gpio_port *mxc_gpio_ports;
static int gpio_table_size;
+#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE 0x4
+
/* Note: This driver assumes 32 GPIOs are handled in one register */
static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
@@ -162,7 +179,6 @@
}
}
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
/* MX1 and MX3 has one interrupt *per* gpio port */
static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
@@ -174,9 +190,7 @@
mxc_gpio_irq_handler(port, irq_stat);
}
-#endif
-#ifdef CONFIG_ARCH_MX2
/* MX2 has one interrupt *for all* gpio ports */
static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
{
@@ -195,7 +209,6 @@
mxc_gpio_irq_handler(&port[i], irq_stat);
}
}
-#endif
static struct irq_chip gpio_irq_chip = {
.ack = gpio_ack_irq,
@@ -284,17 +297,18 @@
/* its a serious configuration bug when it fails */
BUG_ON( gpiochip_add(&port[i].chip) < 0 );
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
- /* setup one handler for each entry */
- set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
- set_irq_data(port[i].irq, &port[i]);
-#endif
+ if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
+ /* setup one handler for each entry */
+ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+ set_irq_data(port[i].irq, &port[i]);
+ }
}
-#ifdef CONFIG_ARCH_MX2
- /* setup one handler for all GPIO interrupts */
- set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
- set_irq_data(port[0].irq, port);
-#endif
+ if (cpu_is_mx2()) {
+ /* setup one handler for all GPIO interrupts */
+ set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+ set_irq_data(port[0].irq, port);
+ }
+
return 0;
}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e91..0376c13 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 0000000..a1fd583
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df..0cf4fa2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -15,12 +15,6 @@
#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6..7776d23 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -26,12 +26,6 @@
MXC_MAX_VIRTUAL_INTS)
/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
* @name Memory Size parameters
*/
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8e..ea87551 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d..fec1bcf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895..2cbfa35 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
#define MXC_MAX_EXP_IO_LINES 16
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e..eb5a502 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
#ifndef __ASSEMBLY__
enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2..8e64325 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd24..d5be6b5 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
#ifndef __ASSEMBLY__
enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3..2bbd6ed 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
/* Definitions for components on the Debug board */
/* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037..383f1c0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1..1341170 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd749..410f978 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
#ifndef __ASSEMBLY__
/*
* This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf1..1ac4e16 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec..6d88c7a 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
/* NOR FLASH */
#define QONG_NOR_SIZE (128*1024*1024)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd0..286cb9b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,33 @@
extern void mx1_map_io(void);
extern void mx21_map_io(void);
+extern void mx25_map_io(void);
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc91231_map_io(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f67..15b2b14 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,52 @@
*
*/
-#include <mach/hardware.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
+#endif
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
+#include <mach/mx25.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
+#include <mach/mx2x.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+#include <mach/mx3x.h>
+#define UART_PADDR UART1_BASE_ADDR
+#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
+
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
-#endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
-#endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
-#endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
-#endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
-#endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mxc91231.h>
+#define UART_PADDR MXC91231_UART2_BASE_ADDR
+#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
- ldreq \rx, =MXC_LL_UART_PADDR @ physical
- ldrne \rx, =MXC_LL_UART_VADDR @ virtual
+ ldreq \rx, =UART_PADDR @ physical
+ ldrne \rx, =UART_VADDR @ virtual
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60..7cf290e 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+ ldr \base, =avic_base
+ ldr \base, [\base]
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee3..78db754 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,14 @@
# include <mach/mx1.h>
#endif
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
#include <mach/mxc.h>
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f01011..5263506 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
* This structure describes the machine which we are running on.
*/
+#include <linux/fb.h>
+
#define PCR_TFT (1 << 31)
#define PCR_COLOR (1 << 30)
#define PCR_PBSIZ_1 (0 << 28)
@@ -13,7 +15,8 @@
#define PCR_BPIX_4 (2 << 25)
#define PCR_BPIX_8 (3 << 25)
#define PCR_BPIX_12 (4 << 25)
-#define PCR_BPIX_16 (4 << 25)
+#define PCR_BPIX_16 (5 << 25)
+#define PCR_BPIX_18 (6 << 25)
#define PCR_PIXPOL (1 << 24)
#define PCR_FLMPOL (1 << 23)
#define PCR_LPPOL (1 << 22)
@@ -46,29 +49,21 @@
#define DMACR_HM(x) (((x) & 0xf) << 16)
#define DMACR_TM(x) ((x) & 0xf)
+struct imx_fb_videomode {
+ struct fb_videomode mode;
+ u32 pcr;
+ unsigned char bpp;
+};
+
struct imx_fb_platform_data {
- u_long pixclock;
-
- u_short xres;
- u_short yres;
-
- u_int nonstd;
- u_char bpp;
- u_char hsync_len;
- u_char left_margin;
- u_char right_margin;
-
- u_char vsync_len;
- u_char upper_margin;
- u_char lower_margin;
- u_char sync;
+ struct imx_fb_videomode *mode;
+ int num_modes;
u_int cmap_greyscale:1,
cmap_inverse:1,
cmap_static:1,
unused:29;
- u_int pcr;
u_int pwmr;
u_int lscr1;
u_int dmacr;
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 0000000..810c47f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 2eb182f..446f867 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -635,6 +635,19 @@
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -669,6 +682,18 @@
#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 0000000..9f13061
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
+#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
+#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
+#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
+#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
+#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
+#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
+#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
+#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
+#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
+#define IOMUX_ICONFIG_FUNC 2 /* used as function */
+#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
+#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label);
+
+/*
+ * releases a single pin:
+ * - make it available for a future use by another driver
+ * - frees the GPIO if the pin was configured as GPIO
+ * - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP (0)
+#define MUX_SIDE_SP (1)
+
+#define MUX_SIDE_SHIFT (26)
+#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT (23)
+#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT (20)
+#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT (15)
+#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT (13)
+#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT (8)
+#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK (0xffffff << 8)
+
+#define GPIO_PORT_MAX (3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+ (((side) << MUX_SIDE_SHIFT) | \
+ (gport << MUX_GPIO_PORT_SHIFT) | \
+ ((gpin) << MUX_GPIO_PIN_SHIFT) | \
+ ((ctlreg) << MUX_REG_SHIFT) | \
+ ((ctlfield) << MUX_FIELD_SHIFT) | \
+ ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT (4)
+#define MUX_MODE_IN_SHIFT (0)
+#define MUX_MODE_SHIFT (0)
+#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+ (pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+ /* AP Side pins */
+ MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24),
+ MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24),
+ MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24),
+ MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24),
+ MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24),
+ MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24),
+ MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24),
+ MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28),
+ MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28),
+ MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28),
+ MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28),
+ MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9),
+ MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9),
+ MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9),
+ MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9),
+ MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9),
+ MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9),
+ MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9),
+ MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9),
+ MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28),
+ MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28),
+ MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28),
+ MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28),
+ MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28),
+ MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28),
+ MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28),
+ MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28),
+ MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28),
+ MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28),
+ MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28),
+ MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28),
+ MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28),
+ MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28),
+ MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28),
+ MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28),
+ MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28),
+ MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28),
+ MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28),
+ MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28),
+ MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28),
+ MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28),
+ MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28),
+ MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28),
+ MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28),
+ MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28),
+ MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28),
+ MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28),
+ MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28),
+ MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28),
+ MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28),
+ MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10),
+ MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10),
+ MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10),
+ MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10),
+ MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11),
+ MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11),
+ MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11),
+ MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11),
+ MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11),
+ MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21),
+ MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21),
+ MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21),
+ MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21),
+ MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21),
+ MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21),
+ MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21),
+ MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21),
+ MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21),
+ MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21),
+ MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21),
+ MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21),
+ MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21),
+ MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21),
+ MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12),
+ MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12),
+ MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9),
+ MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9),
+ MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9),
+ MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9),
+ MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9),
+ MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28),
+ MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28),
+ MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9),
+ MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9),
+ MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9),
+ MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22),
+ MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22),
+ MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22),
+ MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22),
+ MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23),
+ MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23),
+ MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23),
+ MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23),
+ MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28),
+ MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28),
+ MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28),
+ MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28),
+ MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10),
+ MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10),
+ MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10),
+ MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10),
+ MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11),
+ MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11),
+ MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11),
+
+ /* Shared pins */
+ MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28),
+ MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28),
+ MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28),
+ MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28),
+ MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28),
+ MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28),
+ MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28),
+ MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28),
+ MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28),
+ MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28),
+ MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28),
+ MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28),
+ MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28),
+ MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28),
+ MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28),
+ MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28),
+ MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25),
+ MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25),
+ MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25),
+ MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25),
+ MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25),
+ MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25),
+ MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26),
+ MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26),
+ MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26),
+ MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26),
+ MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28),
+ MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13),
+ MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13),
+ MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13),
+ MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13),
+ MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13),
+ MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26),
+ MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26),
+ MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28),
+ MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28),
+ MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28),
+ MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28),
+ MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28),
+ MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28),
+ MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX (104)
+#define PIN_SP_MAX (41)
+
+#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+ IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd8454..a0fa402 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@
/*
* Use to set PAD control
*/
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
-#define PAD_CTL_NO_HYSTERESIS 0
-#define PAD_CTL_HYSTERESIS 1
+#define PAD_CTL_DVS (1 << 13)
+#define PAD_CTL_HYS (1 << 8)
-#define PAD_CTL_PULL_DISABLED 0x0
-#define PAD_CTL_PULL_KEEPER 0xa
-#define PAD_CTL_PULL_DOWN_100K 0xc
-#define PAD_CTL_PULL_UP_47K 0xd
-#define PAD_CTL_PULL_UP_100K 0xe
-#define PAD_CTL_PULL_UP_22K 0xf
+#define PAD_CTL_PKE (1 << 7)
+#define PAD_CTL_PUE (1 << 6)
+#define PAD_CTL_PUS_100K_DOWN (0 << 4)
+#define PAD_CTL_PUS_47K_UP (1 << 4)
+#define PAD_CTL_PUS_100K_UP (2 << 4)
+#define PAD_CTL_PUS_22K_UP (3 << 4)
-#define PAD_CTL_OUTPUT_CMOS 0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
+#define PAD_CTL_ODE (1 << 3)
-#define PAD_CTL_DRIVE_STRENGTH_NORM 0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
-#define PAD_CTL_DRIVE_STRENGTH_MAX 2
+#define PAD_CTL_DSE_STANDARD (0 << 1)
+#define PAD_CTL_DSE_HIGH (1 << 1)
+#define PAD_CTL_DSE_MAX (2 << 1)
-#define PAD_CTL_SLEW_RATE_SLOW 0
-#define PAD_CTL_SLEW_RATE_FAST 1
+#define PAD_CTL_SRE_FAST (1 << 0)
/*
* setups a single pad:
@@ -117,5 +113,10 @@
*/
void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
#endif /* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8ad..6d49f8a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
#ifdef CONFIG_ARCH_MX2
# define GPIO_PORT_MAX 5
#endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX 3
+#endif
#ifndef GPIO_PORT_MAX
# error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
#include <mach/iomux-mx27.h>
#endif
#endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
/* decode irq number to use with IMR(x), ISR(x) and friends */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a365..ead9d59 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,10 @@
#define MXC_GPIO_IRQS (32 * 6)
#elif defined CONFIG_ARCH_MX3
#define MXC_GPIO_IRQS (32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS (32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS (32 * 4)
#endif
/*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00..d3afafd 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,10 @@
#endif
#elif defined CONFIG_ARCH_MX3
#define PHYS_OFFSET UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET UL(0x90000000)
#endif
#if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf3..1b2890a 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
#ifndef __ASM_ARCH_MXC_MX1_H__
#define __ASM_ARCH_MXC_MX1_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
#include <mach/vmalloc.h>
/*
@@ -138,20 +134,6 @@
#define GPIO_INT_PORTD 62
#define WDT_INT 63
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x1C
-#define GPIO_GDIR 0x00
-#define GPIO_PSR 0x24
-#define GPIO_ICR1 0x28
-#define GPIO_ICR2 0x2C
-#define GPIO_IMR 0x30
-#define GPIO_ISR 0x34
-#define GPIO_INT_LOW_LEV 0x3
-#define GPIO_INT_HIGH_LEV 0x2
-#define GPIO_INT_RISE_EDGE 0x0
-#define GPIO_INT_FALL_EDGE 0x1
-#define GPIO_INT_NONE 0x4
-
/* DMA */
#define DMA_REQ_UART3_T 2
#define DMA_REQ_UART3_R 3
@@ -179,8 +161,4 @@
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
-
#endif /* __ASM_ARCH_MXC_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a0..21112c6 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
#ifndef __ASM_ARCH_MXC_MX21_H__
#define __ASM_ARCH_MXC_MX21_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
/* Memory regions and CS */
#define SDRAM_BASE_ADDR 0xC0000000
#define CSD1_BASE_ADDR 0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 0000000..ec64bd9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR 0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define MX25_AIPS1_SIZE SZ_1M
+#define MX25_AIPS2_BASE_ADDR 0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT 0xFC200000
+#define MX25_AIPS2_SIZE SZ_1M
+#define MX25_AVIC_BASE_ADDR 0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT 0xFC400000
+#define MX25_AVIC_SIZE SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x) \
+ (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x) \
+ (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x) \
+ (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x) \
+ (void __force __iomem *) \
+ (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
+ __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \
+ __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \
+ 0xDEADBEEF)
+
+#define UART1_BASE_ADDR 0x43f90000
+#define UART2_BASE_ADDR 0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c..dc3ad9a 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
#ifndef __ASM_ARCH_MXC_MX27_H__
#define __ASM_ARCH_MXC_MX27_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
/* IRAM */
#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
@@ -120,7 +116,4 @@
/* Mandatory defines used globally */
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS (192 + 16)
-
#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3a..db5d921 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
#ifndef __ASM_ARCH_MXC_MX2x_H__
#define __ASM_ARCH_MXC_MX2x_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
/* The following addresses are common between i.MX21 and i.MX27 */
/* Register offests */
@@ -154,20 +150,6 @@
#define MXC_INT_GPIO 8
#define MXC_INT_CSPI3 6
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x1C
-#define GPIO_GDIR 0x00
-#define GPIO_PSR 0x24
-#define GPIO_ICR1 0x28
-#define GPIO_ICR2 0x2C
-#define GPIO_IMR 0x30
-#define GPIO_ISR 0x34
-#define GPIO_INT_LOW_LEV 0x3
-#define GPIO_INT_HIGH_LEV 0x2
-#define GPIO_INT_RISE_EDGE 0x0
-#define GPIO_INT_FALL_EDGE 0x1
-#define GPIO_INT_NONE 0x4
-
/* fixed DMA request numbers */
#define DMA_REQ_CSI_RX 31
#define DMA_REQ_CSI_STAT 30
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b..14ac0dc 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
#define MX31_IRAM_SIZE SZ_16K
-#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000)
#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fef..ab4cfec 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
#define MX35_IRAM_SIZE SZ_128K
#define MXC_FEC_BASE_ADDR 0x50038000
+#define MX35_OTG_BASE_ADDR 0x53ff4000
#define MX35_NFC_BASE_ADDR 0xBB000000
/*
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4b..009f444 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
#ifndef __ASM_ARCH_MXC_MX31_H__
#define __ASM_ARCH_MXC_MX31_H__
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
/*
* MX31 memory map:
*
@@ -263,25 +259,8 @@
#define SYSTEM_REV_MIN CHIP_REV_1_0
#define SYSTEM_REV_NUM 3
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x00
-#define GPIO_GDIR 0x04
-#define GPIO_PSR 0x08
-#define GPIO_ICR1 0x0C
-#define GPIO_ICR2 0x10
-#define GPIO_IMR 0x14
-#define GPIO_ISR 0x18
-#define GPIO_INT_LOW_LEV 0x0
-#define GPIO_INT_HIGH_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_FALL_EDGE 0x3
-#define GPIO_INT_NONE 0x4
-
/* Mandatory defines used globally */
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS 96
-
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern unsigned int system_rev;
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07..5199053 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,9 +26,11 @@
#define MXC_CPU_MX1 1
#define MXC_CPU_MX21 21
+#define MXC_CPU_MX25 25
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
+#define MXC_CPU_MXC91231 91231
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
@@ -58,6 +60,18 @@
# define cpu_is_mx21() (0)
#endif
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25() (0)
+#endif
+
#ifdef CONFIG_MACH_MX27
# ifdef mxc_cpu_type
# undef mxc_cpu_type
@@ -94,13 +108,25 @@
# define cpu_is_mx35() (0)
#endif
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231() (0)
+#endif
+
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
#endif
-#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 0000000..81484d1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - Platform specific register memory map
+ *
+ * Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR 0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT 0xF9000000
+#define MXC91231_L2CC_SIZE SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR 0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define MXC91231_AIPS1_SIZE SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR 0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT 0xFC100000
+#define MXC91231_AIPS2_SIZE SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR 0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT 0xFC200000
+#define MXC91231_SPBA0_SIZE SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR 0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT 0xFC300000
+#define MXC91231_SPBA1_SIZE SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1 0x04
+#define MXC91231_SPBA_SDHC2 0x08
+#define MXC91231_SPBA_UART3 0x0C
+#define MXC91231_SPBA_CSPI2 0x10
+#define MXC91231_SPBA_SSI2 0x14
+#define MXC91231_SPBA_SIM 0x18
+#define MXC91231_SPBA_IIM 0x1C
+#define MXC91231_SPBA_CTI_SDMA 0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28
+#define MXC91231_SPBA_CSPI1 0x30
+#define MXC91231_SPBA_MQSPI 0x34
+#define MXC91231_SPBA_EL1T 0x38
+#define MXC91231_SPBA_IOMUX 0x40
+#define MXC91231_SPBA_CRM_COM 0x44
+#define MXC91231_SPBA_CRM_AP 0x48
+#define MXC91231_SPBA_PLL0 0x4C
+#define MXC91231_SPBA_PLL1 0x50
+#define MXC91231_SPBA_PLL2 0x54
+#define MXC91231_SPBA_GPIO4 0x58
+#define MXC91231_SPBA_SAHARA 0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR 0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT 0xFC400000
+#define MXC91231_ROMP_SIZE SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR 0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT 0xFC410000
+#define MXC91231_AVIC_SIZE SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT 0xFC420000
+#define MXC91231_X_MEMC_SIZE SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR 0x78000000
+#define MXC91231_FB_RAM_SIZE SZ_256K
+#define MXC91231_CSD0_BASE_ADDR 0x80000000
+#define MXC91231_CSD1_BASE_ADDR 0x90000000
+#define MXC91231_CS0_BASE_ADDR 0xA0000000
+#define MXC91231_CS1_BASE_ADDR 0xA8000000
+#define MXC91231_CS2_BASE_ADDR 0xB0000000
+#define MXC91231_CS3_BASE_ADDR 0xB2000000
+#define MXC91231_CS4_BASE_ADDR 0xB4000000
+#define MXC91231_CS5_BASE_ADDR 0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+ (((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+ ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+ MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+ (void __iomem *) \
+ (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+ MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+ 0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x) \
+ (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x) \
+ (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x) \
+ (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x) \
+ (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x) \
+ (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x) \
+ (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x) \
+ (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x) \
+ (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3 0
+#define MXC91231_INT_EL1T_CI 1
+#define MXC91231_INT_EL1T_RFCI 2
+#define MXC91231_INT_EL1T_RFI 3
+#define MXC91231_INT_EL1T_MCU 4
+#define MXC91231_INT_EL1T_IPI 5
+#define MXC91231_INT_MU_GEN 6
+#define MXC91231_INT_GPIO4 7
+#define MXC91231_INT_MMC_SDHC2 8
+#define MXC91231_INT_MMC_SDHC1 9
+#define MXC91231_INT_I2C 10
+#define MXC91231_INT_SSI2 11
+#define MXC91231_INT_SSI1 12
+#define MXC91231_INT_CSPI2 13
+#define MXC91231_INT_CSPI1 14
+#define MXC91231_INT_RTIC 15
+#define MXC91231_INT_SAHARA 15
+#define MXC91231_INT_HAC 15
+#define MXC91231_INT_UART3_RX 16
+#define MXC91231_INT_UART3_TX 17
+#define MXC91231_INT_UART3_MINT 18
+#define MXC91231_INT_ECT 19
+#define MXC91231_INT_SIM_IPB 20
+#define MXC91231_INT_SIM_DATA 21
+#define MXC91231_INT_RNGA 22
+#define MXC91231_INT_DSM_AP 23
+#define MXC91231_INT_KPP 24
+#define MXC91231_INT_RTC 25
+#define MXC91231_INT_PWM 26
+#define MXC91231_INT_GEMK_AP 27
+#define MXC91231_INT_EPIT 28
+#define MXC91231_INT_GPT 29
+#define MXC91231_INT_UART2_RX 30
+#define MXC91231_INT_UART2_TX 31
+#define MXC91231_INT_UART2_MINT 32
+#define MXC91231_INT_NANDFC 33
+#define MXC91231_INT_SDMA 34
+#define MXC91231_INT_USB_WAKEUP 35
+#define MXC91231_INT_USB_SOF 36
+#define MXC91231_INT_PMU_EVTMON 37
+#define MXC91231_INT_USB_FUNC 38
+#define MXC91231_INT_USB_DMA 39
+#define MXC91231_INT_USB_CTRL 40
+#define MXC91231_INT_IPU_ERR 41
+#define MXC91231_INT_IPU_SYN 42
+#define MXC91231_INT_UART1_RX 43
+#define MXC91231_INT_UART1_TX 44
+#define MXC91231_INT_UART1_MINT 45
+#define MXC91231_INT_IIM 46
+#define MXC91231_INT_MU_RX_OR 47
+#define MXC91231_INT_MU_TX_OR 48
+#define MXC91231_INT_SCC_SCM 49
+#define MXC91231_INT_SCC_SMN 50
+#define MXC91231_INT_GPIO2 51
+#define MXC91231_INT_GPIO1 52
+#define MXC91231_INT_MQSPI1 53
+#define MXC91231_INT_MQSPI2 54
+#define MXC91231_INT_WDOG2 55
+#define MXC91231_INT_EXT_INT7 56
+#define MXC91231_INT_EXT_INT6 57
+#define MXC91231_INT_EXT_INT5 58
+#define MXC91231_INT_EXT_INT4 59
+#define MXC91231_INT_EXT_INT3 60
+#define MXC91231_INT_EXT_INT2 61
+#define MXC91231_INT_EXT_INT1 62
+#define MXC91231_INT_EXT_INT0 63
+
+#define MXC91231_MAX_INT_LINES 63
+#define MXC91231_MAX_EXT_LINES 8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241a..ef00199 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
+#include <mach/hardware.h>
+#include <mach/common.h>
+
static inline void arch_idle(void)
{
+#ifdef CONFIG_ARCH_MXC91231
+ if (cpu_is_mxc91231()) {
+ /* Need this to set DSM low-power mode */
+ mxc91231_prepare_idle();
+ }
+#endif
+
cpu_do_idle();
}
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73..527a6c2 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,10 @@
#define CLOCK_TICK_RATE 13300000
#elif defined CONFIG_ARCH_MX3
#define CLOCK_TICK_RATE 16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE 16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE 13000000
#endif
#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe03..082a390 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
#define __MXC_BOOT_UNCOMPRESS
#include <mach/hardware.h>
+#include <asm/mach-types.h>
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
#define USR2 0x98
#define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
static void putc(int ch)
{
- static unsigned long serial_port = 0;
-
- if (unlikely(serial_port == 0)) {
- do {
- serial_port = UART1_BASE_ADDR;
- if (UART(UCR1) & UCR1_UARTEN)
- break;
- serial_port = UART2_BASE_ADDR;
- if (UART(UCR1) & UCR1_UARTEN)
- break;
- return;
- } while (0);
- }
+ if (!uart_base)
+ return;
+ if (!(UART(UCR1) & UCR1_UARTEN))
+ return;
while (!(UART(USR2) & USR2_TXFE))
barrier();
@@ -68,11 +62,49 @@
#define flush() do { } while (0)
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR 0x00206000
+#define MX25_UART1_BASE_ADDR 0x43f90000
+#define MX2X_UART1_BASE_ADDR 0x1000a000
+#define MX3X_UART1_BASE_ADDR 0x43F90000
+#define MX3X_UART2_BASE_ADDR 0x43F94000
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ switch (arch_id) {
+ case MACH_TYPE_MX1ADS:
+ case MACH_TYPE_SCB9328:
+ uart_base = MX1_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX25_3DS:
+ uart_base = MX25_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_IMX27LITE:
+ case MACH_TYPE_MX27_3DS:
+ case MACH_TYPE_MX27ADS:
+ case MACH_TYPE_PCM038:
+ case MACH_TYPE_MX21ADS:
+ uart_base = MX2X_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX31LITE:
+ case MACH_TYPE_ARMADILLO5X0:
+ case MACH_TYPE_MX31MOBOARD:
+ case MACH_TYPE_QONG:
+ case MACH_TYPE_MX31_3DS:
+ case MACH_TYPE_PCM037:
+ case MACH_TYPE_MX31ADS:
+ case MACH_TYPE_MX35_3DS:
+ case MACH_TYPE_PCM043:
+ uart_base = MX3X_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MAGX_ZN5:
+ uart_base = MX3X_UART2_BASE_ADDR;
+ break;
+ default:
+ break;
+ }
+}
+
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
#define arch_decomp_wdog()
#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f..851ca99 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
#include <asm/mach/map.h>
#include <mach/iomux-v3.h>
-#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
@@ -45,14 +45,14 @@
if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
return -EBUSY;
if (pad->mux_ctrl_ofs)
- __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+ __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
if (pad->select_input_ofs)
__raw_writel(pad->select_input,
- IOMUX_BASE + pad->select_input_ofs);
+ base + pad->select_input_ofs);
- if (!(pad->pad_ctrl & NO_PAD_CTRL))
- __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+ if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+ __raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
return 0;
}
EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@
}
}
EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+ base = iomux_v3_base;
+}
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee763..778ddfe 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
#define AVIC_FIPNDH 0x60 /* fast int pending high */
#define AVIC_FIPNDL 0x64 /* fast int pending low */
-static void __iomem *avic_base;
+void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
@@ -113,11 +113,11 @@
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
{
int i;
- avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+ avic_base = irqbase;
/* put the AVIC into the reset value with
* all interrupts disabled
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198..5cdbd60 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
@@ -55,9 +56,11 @@
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- if (cpu_is_mx27() || cpu_is_mx3()) {
+ if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
+ u32 cr;
+
c = clk_get_rate(pwm->clk);
c = c * period_ns;
do_div(c, 1000000000);
@@ -72,9 +75,15 @@
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
- writel(MX3_PWMCR_PRESCALER(prescale - 1) |
- MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
- pwm->mmio_base + MX3_PWMCR);
+
+ cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+ if (cpu_is_mx25())
+ cr |= MX3_PWMCR_CLKSRC_IPG;
+ else
+ cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+ writel(cr, pwm->mmio_base + MX3_PWMCR);
} else if (cpu_is_mx1() || cpu_is_mx21()) {
/* The PWM subsystem allows for exact frequencies. However,
* I cannot connect a scope on my device to the PWM line and
@@ -118,6 +127,8 @@
void pwm_disable(struct pwm_device *pwm)
{
+ writel(0, pwm->mmio_base + MX3_PWMCR);
+
if (pwm->clk_enabled) {
clk_disable(pwm->clk);
pwm->clk_enabled = 0;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c3757..97f4279 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,32 +27,38 @@
#include <linux/delay.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <asm/proc-fns.h>
#include <asm/system.h>
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE (1 << 0)
-#else
-#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE (1 << 2)
-#endif
+static void __iomem *wdog_base;
/*
* Reset the system. It is called by machine_restart().
*/
void arch_reset(char mode, const char *cmd)
{
- if (!cpu_is_mx1()) {
+ unsigned int wcr_enable;
+
+#ifdef CONFIG_ARCH_MXC91231
+ if (cpu_is_mxc91231()) {
+ mxc91231_arch_reset(mode, cmd);
+ return;
+ }
+#endif
+ if (cpu_is_mx1()) {
+ wcr_enable = (1 << 0);
+ } else {
struct clk *clk;
clk = clk_get_sys("imx-wdt.0", NULL);
if (!IS_ERR(clk))
clk_enable(clk);
+ wcr_enable = (1 << 2);
}
/* Assert SRS signal */
- __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+ __raw_writew(wcr_enable, wdog_base);
/* wait for reset to assert... */
mdelay(500);
@@ -65,3 +71,8 @@
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
}
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+ wdog_base = base;
+}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a5..844567ee 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35 */
+/* MX31, MX35, MX25, MXC91231 */
#define MX3_TCTL_WAITEN (1 << 3)
#define MX3_TCTL_CLK_IPG (1 << 6)
#define MX3_TCTL_FRR (1 << 9)
@@ -66,7 +66,7 @@
{
unsigned int tmp;
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(0, timer_base + MX3_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@
static inline void gpt_irq_enable(void)
{
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(1<<0, timer_base + MX3_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@
__raw_writel(0, timer_base + MX1_2_TSTAT);
if (cpu_is_mx2())
__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
}
@@ -117,7 +117,7 @@
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
clocksource_mxc.read = mx3_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
timer_base + MX3_TCMP);
else
@@ -233,7 +233,7 @@
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
tstat = __raw_readl(timer_base + MX3_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
clockevent_mxc.set_next_event = mx3_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -281,30 +281,13 @@
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
{
uint32_t tctl_val;
- int irq;
clk_enable(timer_clk);
- if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
- timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
- irq = TIM1_INT;
-#endif
- } else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
- timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
- irq = MXC_INT_GPT1;
-#endif
- } else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
- timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
- irq = MXC_INT_GPT;
-#endif
- } else
- BUG();
+ timer_base = base;
/*
* Initialise to a known state (all timers off, and timing reset)
@@ -313,7 +296,7 @@
__raw_writel(0, timer_base + MXC_TCTL);
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
- if (cpu_is_mx3())
+ if (cpu_is_mx3() || cpu_is_mx25())
tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e3ac94f..9b00f4c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1127,6 +1127,11 @@
void omap_dma_link_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+ CCR(lch_head));
+ return;
+ }
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
BUG();
return;
@@ -1149,6 +1154,11 @@
void omap_dma_unlink_lch(int lch_head, int lch_queue)
{
if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+ CCR(lch_head));
+ return;
+ }
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
BUG();
return;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9298bc0..fd21937 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
+#define OMAP4_GPIO_REVISION 0x0000
+#define OMAP4_GPIO_SYSCONFIG 0x0010
+#define OMAP4_GPIO_EOI 0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
+#define OMAP4_GPIO_IRQSTATUS0 0x002c
+#define OMAP4_GPIO_IRQSTATUS1 0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
+#define OMAP4_GPIO_IRQWAKEN0 0x0044
+#define OMAP4_GPIO_IRQWAKEN1 0x0048
+#define OMAP4_GPIO_SYSSTATUS 0x0104
+#define OMAP4_GPIO_CTRL 0x0130
+#define OMAP4_GPIO_OE 0x0134
+#define OMAP4_GPIO_DATAIN 0x0138
+#define OMAP4_GPIO_DATAOUT 0x013c
+#define OMAP4_GPIO_LEVELDETECT0 0x0140
+#define OMAP4_GPIO_LEVELDETECT1 0x0144
+#define OMAP4_GPIO_RISINGDETECT 0x0148
+#define OMAP4_GPIO_FALLINGDETECT 0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARDATAOUT 0x0190
+#define OMAP4_GPIO_SETDATAOUT 0x0194
/*
* omap34xx specific GPIO registers
*/
@@ -386,12 +412,16 @@
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_OE;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -459,8 +489,7 @@
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -469,6 +498,15 @@
l = 1 << gpio;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ if (enable)
+ reg += OMAP4_GPIO_SETDATAOUT;
+ else
+ reg += OMAP4_GPIO_CLEARDATAOUT;
+ l = 1 << gpio;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -509,12 +547,16 @@
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_DATAIN;
+ break;
+#endif
default:
return -EINVAL;
}
@@ -589,7 +631,11 @@
bank = get_gpio_bank(gpio);
reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+ reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
spin_lock_irqsave(&bank->lock, flags);
val = __raw_readl(reg);
@@ -626,7 +672,11 @@
reg = bank->base;
enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+ reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
__raw_writel(enc_time, reg);
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -638,23 +688,46 @@
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
+ u32 val;
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
-
+ if (cpu_is_omap44xx()) {
+ MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
+ } else {
+ MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
+ }
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
- if (trigger != 0)
- __raw_writel(1 << gpio, bank->base
+ if (cpu_is_omap44xx()) {
+ if (trigger != 0)
+ __raw_writel(1 << gpio, bank->base+
+ OMAP4_GPIO_IRQWAKEN0);
+ else {
+ val = __raw_readl(bank->base +
+ OMAP4_GPIO_IRQWAKEN0);
+ __raw_writel(val & (~(1 << gpio)), bank->base +
+ OMAP4_GPIO_IRQWAKEN0);
+ }
+ } else {
+ if (trigger != 0)
+ __raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_SETWKUENA);
- else
- __raw_writel(1 << gpio, bank->base
+ else
+ __raw_writel(1 << gpio, bank->base
+ OMAP24XX_GPIO_CLEARWKUENA);
+ }
} else {
if (trigger != 0)
bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -662,9 +735,15 @@
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
- bank->level_mask =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ if (cpu_is_omap44xx()) {
+ bank->level_mask =
+ __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+ __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+ } else {
+ bank->level_mask =
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+ __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+ }
}
#endif
@@ -828,12 +907,16 @@
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_IRQSTATUS0;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -843,12 +926,16 @@
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+ if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
__raw_writel(gpio_mask, reg);
/* Flush posted write for the irq status to avoid spurious interrupts */
__raw_readl(reg);
-#endif
+ }
}
static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -898,13 +985,18 @@
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ case METHOD_GPIO_24XX:
+ reg += OMAP4_GPIO_IRQSTATUSSET0;
+ mask = 0xffffffff;
+ break;
+#endif
default:
WARN_ON(1);
return 0;
@@ -972,8 +1064,7 @@
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -982,6 +1073,15 @@
l = gpio_mask;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ if (enable)
+ reg += OMAP4_GPIO_IRQSTATUSSET0;
+ else
+ reg += OMAP4_GPIO_IRQSTATUSCLR0;
+ l = gpio_mask;
+ break;
+#endif
default:
WARN_ON(1);
return;
@@ -1157,11 +1257,14 @@
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ if (bank->method == METHOD_GPIO_24XX)
+ isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
+#endif
while(1) {
u32 isr_saved, level_mask = 0;
u32 enabled;
@@ -1638,7 +1741,7 @@
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_44xx;
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
@@ -1672,7 +1775,16 @@
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
};
-
+ if (cpu_is_omap44xx()) {
+ __raw_writel(0xffffffff, bank->base +
+ OMAP4_GPIO_IRQSTATUSCLR0);
+ __raw_writew(0x0015, bank->base +
+ OMAP4_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base +
+ OMAP4_GPIO_DEBOUNCENABLE);
+ /* Initialize interface clock ungated, module enabled */
+ __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+ } else {
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1680,12 +1792,12 @@
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+ }
if (i < ARRAY_SIZE(non_wakeup_gpios))
bank->non_wakeup_gpios = non_wakeup_gpios[i];
gpio_count = 32;
}
#endif
-
/* REVISIT eventually switch from OMAP-specific gpio structs
* over to the generic ones
*/
@@ -1771,14 +1883,20 @@
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ break;
+#endif
default:
continue;
}
@@ -1813,13 +1931,18 @@
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_24XX:
+ wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ break;
+#endif
default:
continue;
}
@@ -1863,21 +1986,29 @@
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ bank->saved_datain = __raw_readl(bank->base +
+ OMAP4_GPIO_DATAIN);
+ l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+ l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
+#endif
bank->saved_fallingdetect = l1;
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+ __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+#endif
c++;
}
if (!c) {
@@ -1899,27 +2030,29 @@
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
bank->base + OMAP24XX_GPIO_RISINGDETECT);
+ l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ __raw_writel(bank->saved_fallingdetect,
+ bank->base + OMAP4_GPIO_FALLINGDETECT);
+ __raw_writel(bank->saved_risingdetect,
+ bank->base + OMAP4_GPIO_RISINGDETECT);
+ l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
#endif
/* Check if any of the non-wakeup interrupt GPIOs have changed
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
- defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1927,6 +2060,20 @@
__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ old0 = __raw_readl(bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ old1 = __raw_readl(bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+ __raw_writel(old0 | l, bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ __raw_writel(old1 | l, bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+ __raw_writel(old0, bank->base +
+ OMAP4_GPIO_LEVELDETECT0);
+ __raw_writel(old1, bank->base +
+ OMAP4_GPIO_LEVELDETECT1);
+#endif
}
}
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc..72f680b 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8)
+
/* Dummy defines to keep multi-omap compiles happy */
#define OMAP1_DMA_REVISION 0
#define OMAP1_DMA_IRQSTATUS_L0 0
@@ -311,6 +316,89 @@
#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */
+
/*----------------------------------------------------------------------------*/
/* Hardware registers for LCD DMA */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea..e0d6eca 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
#define OMAP34XX_MCBSP4_BASE 0x49026000
#define OMAP34XX_MCBSP5_BASE 0x48096000
+#define OMAP44XX_MCBSP1_BASE 0x49022000
+#define OMAP44XX_MCBSP2_BASE 0x49024000
+#define OMAP44XX_MCBSP3_BASE 0x49026000
+#define OMAP44XX_MCBSP4_BASE 0x48074000
+
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
#define OMAP_MCBSP_REG_DRR2 0x00
@@ -98,7 +103,8 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
@@ -134,6 +140,11 @@
#define OMAP_MCBSP_REG_XCERG 0x74
#define OMAP_MCBSP_REG_XCERH 0x78
#define OMAP_MCBSP_REG_SYSCON 0x8C
+#define OMAP_MCBSP_REG_THRSH2 0x90
+#define OMAP_MCBSP_REG_THRSH1 0x94
+#define OMAP_MCBSP_REG_IRQST 0xA0
+#define OMAP_MCBSP_REG_IRQEN 0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
#define OMAP_MCBSP_REG_XCCR 0xAC
#define OMAP_MCBSP_REG_RCCR 0xB0
@@ -249,8 +260,27 @@
#define RDISABLE 0x0001
/********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value) ((value)<<8)
+#define SIDLEMODE(value) ((value)<<3)
+#define ENAWAKEUP 0x0004
#define SOFTRST 0x0002
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT 0
+#define MCBSP_DMA_MODE_THRESHOLD 1
+#define MCBSP_DMA_MODE_FRAME 2
+
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN 0x4000
+#define XRDYEN 0x0400
+#define XEOFEN 0x0200
+#define XFSXEN 0x0100
+#define XSYNCERREN 0x0080
+#define RRDYEN 0x0008
+#define REOFEN 0x0004
+#define RFSREN 0x0002
+#define RSYNCERREN 0x0001
+
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
u16 spcr2;
@@ -344,6 +374,9 @@
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+ u16 buffer_size;
+#endif
};
struct omap_mcbsp {
@@ -377,6 +410,11 @@
struct omap_mcbsp_platform_data *pdata;
struct clk *iclk;
struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+ int dma_op_mode;
+ u16 max_tx_thres;
+ u16 max_rx_thres;
+#endif
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;
@@ -385,10 +423,25 @@
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
+#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
void omap_mcbsp_xmit_word(unsigned int id, u32 word);
u32 omap_mcbsp_recv_word(unsigned int id);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e01..88ac976 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,13 +191,177 @@
OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
}
}
EXPORT_SYMBOL(omap_mcbsp_config);
+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+
+ OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+ struct omap_mcbsp *mcbsp;
+ void __iomem *io_base;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+ io_base = mcbsp->io_base;
+
+ OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ int dma_op_mode;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ spin_lock_irq(&mcbsp->lock);
+ dma_op_mode = mcbsp->dma_op_mode;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+ /*
+ * Enable wakup behavior, smart idle and all wakeups
+ * REVISIT: some wakeups may be unnecessary
+ */
+ if (cpu_is_omap34xx()) {
+ u16 syscon;
+
+ syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+ syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+
+ spin_lock_irq(&mcbsp->lock);
+ if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+ syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+ CLOCKACTIVITY(0x02));
+ OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+ XRDYEN | RRDYEN);
+ } else {
+ syscon |= SIDLEMODE(0x01);
+ }
+ spin_unlock_irq(&mcbsp->lock);
+
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+ }
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+ /*
+ * Disable wakup behavior, smart idle and all wakeups
+ */
+ if (cpu_is_omap34xx()) {
+ u16 syscon;
+
+ syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+ syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+ /*
+ * HW bug workaround - If no_idle mode is taken, we need to
+ * go to smart_idle before going to always_idle, or the
+ * device will not hit retention anymore.
+ */
+ syscon |= SIDLEMODE(0x02);
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+ syscon &= ~(SIDLEMODE(0x03));
+ OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+ OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+ }
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+#endif
+
/*
* We can choose between IRQ based or polled IO.
* This needs to be called before omap_mcbsp_request().
@@ -257,6 +421,9 @@
clk_enable(mcbsp->iclk);
clk_enable(mcbsp->fclk);
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_request(mcbsp);
+
/*
* Make sure that transmitter, receiver and sample-rate generator are
* not running before activating IRQs.
@@ -305,6 +472,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
+ /* Do procedure specific to omap34xx arch, if applicable */
+ omap34xx_mcbsp_free(mcbsp);
+
clk_disable(mcbsp->fclk);
clk_disable(mcbsp->iclk);
@@ -328,14 +498,15 @@
EXPORT_SYMBOL(omap_mcbsp_free);
/*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
*/
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
void __iomem *io_base;
+ int idle;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +519,58 @@
mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
- /* Start the sample generator */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+ idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+ OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+ if (idle) {
+ /* Start the sample generator */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+ }
/* Enable transmitter and receiver */
+ tx &= 1;
w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
+ rx &= 1;
w = OMAP_MCBSP_READ(io_base, SPCR1);
- OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
- udelay(100);
+ /*
+ * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+ * REVISIT: 100us may give enough time for two CLKSRG, however
+ * due to some unknown PM related, clock gating etc. reason it
+ * is now at 500us.
+ */
+ udelay(500);
- /* Start frame sync */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+ if (idle) {
+ /* Start frame sync */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+ }
+
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ /* Release the transmitter and receiver */
+ w = OMAP_MCBSP_READ(io_base, XCCR);
+ w &= ~(tx ? XDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, XCCR, w);
+ w = OMAP_MCBSP_READ(io_base, RCCR);
+ w &= ~(rx ? RDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, RCCR, w);
+ }
/* Dump McBSP Regs */
omap_mcbsp_dump_reg(id);
}
EXPORT_SYMBOL(omap_mcbsp_start);
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
void __iomem *io_base;
+ int idle;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -385,16 +582,33 @@
io_base = mcbsp->io_base;
/* Reset transmitter */
+ tx &= 1;
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ w = OMAP_MCBSP_READ(io_base, XCCR);
+ w |= (tx ? XDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, XCCR, w);
+ }
w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
/* Reset receiver */
+ rx &= 1;
+ if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+ w = OMAP_MCBSP_READ(io_base, RCCR);
+ w |= (tx ? RDISABLE : 0);
+ OMAP_MCBSP_WRITE(io_base, RCCR, w);
+ }
w = OMAP_MCBSP_READ(io_base, SPCR1);
- OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+ OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
- /* Reset the sample rate generator */
- w = OMAP_MCBSP_READ(io_base, SPCR2);
- OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+ idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+ OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+ if (idle) {
+ /* Reset the sample rate generator */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+ }
}
EXPORT_SYMBOL(omap_mcbsp_stop);
@@ -883,6 +1097,149 @@
}
EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m) (mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val) ((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop) \
+static ssize_t prop##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
+ \
+ return sprintf(buf, "%u\n", mcbsp->prop); \
+} \
+ \
+static ssize_t prop##_store(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t size) \
+{ \
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
+ unsigned long val; \
+ int status; \
+ \
+ status = strict_strtoul(buf, 0, &val); \
+ if (status) \
+ return status; \
+ \
+ if (!valid_threshold(mcbsp, val)) \
+ return -EDOM; \
+ \
+ mcbsp->prop = val; \
+ return size; \
+} \
+ \
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const char *dma_op_modes[] = {
+ "element", "threshold", "frame",
+};
+
+static ssize_t dma_op_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ int dma_op_mode, i = 0;
+ ssize_t len = 0;
+ const char * const *s;
+
+ spin_lock_irq(&mcbsp->lock);
+ dma_op_mode = mcbsp->dma_op_mode;
+ spin_unlock_irq(&mcbsp->lock);
+
+ for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+ if (dma_op_mode == i)
+ len += sprintf(buf + len, "[%s] ", *s);
+ else
+ len += sprintf(buf + len, "%s ", *s);
+ }
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ const char * const *s;
+ int i = 0;
+
+ for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+ if (sysfs_streq(buf, *s))
+ break;
+
+ if (i == ARRAY_SIZE(dma_op_modes))
+ return -EINVAL;
+
+ spin_lock_irq(&mcbsp->lock);
+ if (!mcbsp->free) {
+ size = -EBUSY;
+ goto unlock;
+ }
+ mcbsp->dma_op_mode = i;
+
+unlock:
+ spin_unlock_irq(&mcbsp->lock);
+
+ return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
+static inline int __devinit omap_additional_add(struct device *dev)
+{
+ return sysfs_create_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devexit omap_additional_remove(struct device *dev)
+{
+ sysfs_remove_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (cpu_is_omap34xx()) {
+ mcbsp->max_tx_thres = max_thres(mcbsp);
+ mcbsp->max_rx_thres = max_thres(mcbsp);
+ /*
+ * REVISIT: Set dmap_op_mode to THRESHOLD as default
+ * for mcbsp2 instances.
+ */
+ if (omap_additional_add(mcbsp->dev))
+ dev_warn(mcbsp->dev,
+ "Unable to create additional controls\n");
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+ if (cpu_is_omap34xx())
+ omap_additional_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -953,6 +1310,10 @@
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
platform_set_drvdata(pdev, mcbsp);
+
+ /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+ omap34xx_device_init(mcbsp);
+
return 0;
err_fclk:
@@ -976,6 +1337,8 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
+ omap34xx_device_exit(mcbsp);
+
clk_disable(mcbsp->fclk);
clk_disable(mcbsp->iclk);
clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 9646a94..07c430f 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -11,6 +11,8 @@
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
+#include <linux/init.h>
+
/*
* GENERIC_GPIO primitives.
*/
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c755..8931c5f 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@
help
Compile in platform device definition for USB high-speed OtG
+config S3C_DEV_NAND
+ bool
+ help
+ Compile in platform device definition for NAND controller
+
endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766..3c09109 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,13 +28,17 @@
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
+
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 0000000..4e53237
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+ [0] = {
+ .start = S3C_PA_NAND,
+ .end = S3C_PA_NAND + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+struct platform_device s3c_device_nand = {
+ .name = "s3c2410-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_nand_resource),
+ .resource = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd4..5f3b1cd 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
extern struct s3c_adc_client *
s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts);
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
new file mode 100644
index 0000000..0f440b9
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+ unsigned int use_mpllin:1;
+ unsigned int output_cdclk:1;
+
+ unsigned int have_mic:1;
+ unsigned int have_lout:1;
+
+ int amp_gpio;
+ int amp_gain[2];
+
+ void (*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name,
+ struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a133..7b982b7 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@
struct s3c_cpufreq_board;
struct s3c_iotimings;
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
struct s3c_freq {
unsigned long fclk;
unsigned long armclk;
@@ -25,48 +40,84 @@
unsigned long pclk;
};
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
* notification can use this information that is not provided by just
* having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
*/
-
struct s3c_cpufreq_freqs {
struct cpufreq_freqs freqs;
struct s3c_freq old;
struct s3c_freq new;
+
+ unsigned int pll_changing:1;
};
#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
struct s3c_clkdivs {
- int p_divisor; /* fclk / pclk */
- int h_divisor; /* fclk / hclk */
- int arm_divisor; /* not all cpus have this. */
- unsigned char dvs; /* using dvs mode to arm. */
+ int p_divisor;
+ int h_divisor;
+ int arm_divisor;
+ unsigned char dvs;
};
#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
struct s3c_pllval {
unsigned long freq;
unsigned long pll_reg;
};
-struct s3c_cpufreq_config {
- struct s3c_freq freq;
- struct s3c_pllval pll;
- struct s3c_clkdivs divs;
- struct s3c_cpufreq_info *info; /* for core, not drivers */
- struct s3c_cpufreq_board *board;
-};
-
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ * initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ * lines that will require the hardware timing registers to be
+ * updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ * is left at zero will use the CPU's settings.
*
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
+ *
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
*/
struct s3c_cpufreq_board {
- unsigned int refresh; /* refresh period in ns */
+ unsigned int refresh;
unsigned int auto_io:1; /* automatically init io timings. */
unsigned int need_io:1; /* set if needs io timing support. */
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cb..fbc3d49 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@
/* system device classes */
extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e17082..0f540ea 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
+extern struct platform_device s3c_device_hwmon;
+
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
@@ -56,5 +58,6 @@
#ifdef CONFIG_CPU_S3C2440
extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
#endif
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 0000000..1ba88ea
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+ const char *name;
+ unsigned int mult;
+ unsigned int div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+ struct s3c_hwmon_chcfg *in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d..250be31 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */
#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */
-#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */
+#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */
#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */
#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */
#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
+
#endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 0fad757..07659da 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -33,6 +33,11 @@
#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1)
#define S3C2412_IISCON_IIS_ACTIVE (1 << 0)
+#define S3C64XX_IISMOD_BLC_16BIT (0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT (1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT (2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK (3 << 13)
+
#define S3C64XX_IISMOD_IMS_PCLK (0 << 10)
#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10)
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
new file mode 100644
index 0000000..4fdc5b3
--- /dev/null
+++ b/arch/arm/plat-s3c/pwm.c
@@ -0,0 +1,410 @@
+/* arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C series PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+
+struct pwm_device {
+ struct list_head list;
+ struct platform_device *pdev;
+
+ struct clk *clk_div;
+ struct clk *clk;
+ const char *label;
+
+ unsigned int period_ns;
+ unsigned int duty_ns;
+
+ unsigned char tcon_base;
+ unsigned char running;
+ unsigned char use_count;
+ unsigned char pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq) \
+ (struct resource [TIMER_RESOURCE_SIZE]) { \
+ [0] = { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ } \
+ }
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
+ .name = "s3c24xx-pwm", \
+ .id = _tmr_no, \
+ .num_resources = TIMER_RESOURCE_SIZE, \
+ .resource = TIMER_RESOURCE(_tmr_no, _irq), \
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+ [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+ [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+ [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+ [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+ [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+ return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, list) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count = 1;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+ mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ unsigned long flags;
+ unsigned long tcon;
+
+ local_irq_save(flags);
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon |= pwm_tcon_start(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+ pwm->running = 1;
+ return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ unsigned long flags;
+ unsigned long tcon;
+
+ local_irq_save(flags);
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon &= ~pwm_tcon_start(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+ pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+ unsigned long tin_parent_rate;
+ unsigned int div;
+
+ tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+ pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+ for (div = 2; div <= 16; div *= 2) {
+ if ((tin_parent_rate / (div << 16)) < freq)
+ return tin_parent_rate / div;
+ }
+
+ return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long tin_rate;
+ unsigned long tin_ns;
+ unsigned long period;
+ unsigned long flags;
+ unsigned long tcon;
+ unsigned long tcnt;
+ long tcmp;
+
+ /* We currently avoid using 64bit arithmetic by using the
+ * fact that anything faster than 1Hz is easily representable
+ * by 32bits. */
+
+ if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+ return -ERANGE;
+
+ if (duty_ns > period_ns)
+ return -EINVAL;
+
+ if (period_ns == pwm->period_ns &&
+ duty_ns == pwm->duty_ns)
+ return 0;
+
+ /* The TCMP and TCNT can be read without a lock, they're not
+ * shared between the timers. */
+
+ tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+ tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+ period = NS_IN_HZ / period_ns;
+
+ pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+ duty_ns, period_ns, period);
+
+ /* Check to see if we are changing the clock rate of the PWM */
+
+ if (pwm->period_ns != period_ns) {
+ if (pwm_is_tdiv(pwm)) {
+ tin_rate = pwm_calc_tin(pwm, period);
+ clk_set_rate(pwm->clk_div, tin_rate);
+ } else
+ tin_rate = clk_get_rate(pwm->clk);
+
+ pwm->period_ns = period_ns;
+
+ pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+ tin_ns = NS_IN_HZ / tin_rate;
+ tcnt = period_ns / tin_ns;
+ } else
+ tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+ /* Note, counters count down */
+
+ tcmp = duty_ns / tin_ns;
+ tcmp = tcnt - tcmp;
+ /* the pwm hw only checks the compare register after a decrement,
+ so the pin never toggles if tcmp = tcnt */
+ if (tcmp == tcnt)
+ tcmp--;
+
+ pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+ if (tcmp < 0)
+ tcmp = 0;
+
+ /* Update the PWM register block. */
+
+ local_irq_save(flags);
+
+ __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+ __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon |= pwm_tcon_manulupdate(pwm);
+ tcon |= pwm_tcon_autoreload(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ tcon &= ~pwm_tcon_manulupdate(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+ pwm->duty_ns = -1;
+ pwm->period_ns = -1;
+
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->list, &pwm_list);
+ mutex_unlock(&pwm_lock);
+
+ return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pwm_device *pwm;
+ unsigned long flags;
+ unsigned long tcon;
+ unsigned int id = pdev->id;
+ int ret;
+
+ if (id == 4) {
+ dev_err(dev, "TIMER4 is currently not supported\n");
+ return -ENXIO;
+ }
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(dev, "failed to allocate pwm_device\n");
+ return -ENOMEM;
+ }
+
+ pwm->pdev = pdev;
+ pwm->pwm_id = id;
+
+ /* calculate base of control bits in TCON */
+ pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+ pwm->clk = clk_get(dev, "pwm-tin");
+ if (IS_ERR(pwm->clk)) {
+ dev_err(dev, "failed to get pwm tin clk\n");
+ ret = PTR_ERR(pwm->clk);
+ goto err_alloc;
+ }
+
+ pwm->clk_div = clk_get(dev, "pwm-tdiv");
+ if (IS_ERR(pwm->clk_div)) {
+ dev_err(dev, "failed to get pwm tdiv clk\n");
+ ret = PTR_ERR(pwm->clk_div);
+ goto err_clk_tin;
+ }
+
+ local_irq_save(flags);
+
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon |= pwm_tcon_invert(pwm);
+ __raw_writel(tcon, S3C2410_TCON);
+
+ local_irq_restore(flags);
+
+
+ ret = pwm_register(pwm);
+ if (ret) {
+ dev_err(dev, "failed to register pwm\n");
+ goto err_clk_tdiv;
+ }
+
+ pwm_dbg(pwm, "config bits %02x\n",
+ (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+ dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+ clk_get_rate(pwm->clk),
+ clk_get_rate(pwm->clk_div),
+ pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+ platform_set_drvdata(pdev, pwm);
+ return 0;
+
+ err_clk_tdiv:
+ clk_put(pwm->clk_div);
+
+ err_clk_tin:
+ clk_put(pwm->clk);
+
+ err_alloc:
+ kfree(pwm);
+ return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+ clk_put(pwm->clk_div);
+ clk_put(pwm->clk);
+ kfree(pwm);
+
+ return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+ .driver = {
+ .name = "s3c24xx-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_pwm_probe,
+ .remove = __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ int ret;
+
+ clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+ clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+ if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+ printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = platform_driver_register(&s3c_pwm_driver);
+ if (ret)
+ printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+ return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc91..9c7aca4 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select S3C_DEVICE_NAND
help
Base platform code for any Samsung S3C24XX device
@@ -34,6 +35,40 @@
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -105,8 +140,39 @@
SPI GPIO configuration code for BUS 1 when connected to
GPG5, GPG6 and GPG7.
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+ bool
+ help
+ SPI GPIO configuration code for BUS 1 when connected to
+ GPD8, GPD9 and GPD10.
+
# common code for s3c24xx based machines, such as the SMDKs.
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select io timing code that is common to the s3c2410
+ and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ help
+ Intel node to select io timing code that is common to the s3c2412
+ and the s3c2443.
+
config MACH_SMDK
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165..7780d2d 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,19 +20,28 @@
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
# Architecture dependant builds
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
+obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
# device specific setup and/or initialisation
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
@@ -41,6 +50,7 @@
obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o
# machine common support
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf1..11117a7 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
struct s3c_adc_client {
struct platform_device *pdev;
struct list_head pend;
+ wait_queue_head_t *wait;
unsigned int nr_samples;
+ int result;
unsigned char is_ts;
unsigned char channel;
- void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2,
+ void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+ void (*convert_cb)(struct s3c_adc_client *c,
+ unsigned val1, unsigned val2,
unsigned *samples_left);
};
@@ -81,7 +84,7 @@
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
- client->select_cb(1);
+ client->select_cb(client, 1);
con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@
}
EXPORT_SYMBOL_GPL(s3c_adc_start);
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+ unsigned v, unsigned u, unsigned *left)
+{
+ client->result = v;
+ wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+ int ret;
+
+ client->convert_cb = s3c_convert_done;
+ client->wait = &wake;
+ client->result = -1;
+
+ ret = s3c_adc_start(client, ch, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+ if (client->result < 0) {
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ client->convert_cb = NULL;
+ return client->result;
+
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+ unsigned select)
{
}
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned int selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
WARN_ON(!pdev);
- WARN_ON(!conv);
if (!select)
select = s3c_adc_default_select;
- if (!conv || !pdev)
+ if (!pdev)
return ERR_PTR(-EINVAL);
client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
client->nr_samples--;
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+ if (client->convert_cb)
+ (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+ &client->nr_samples);
if (client->nr_samples > 0) {
/* fire another conversion for this */
- client->select_cb(1);
+ client->select_cb(client, 1);
s3c_adc_convert(adc);
} else {
local_irq_save(flags);
- (client->select_cb)(0);
+ (client->select_cb)(client, 0);
adc->cur = NULL;
s3c_adc_try(adc);
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 0000000..a927666
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+ seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+ f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_cpufreq_board *brd;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ brd = cfg->board;
+ if (!brd) {
+ seq_printf(seq, "no board definition set?\n");
+ return 0;
+ }
+
+ seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+ seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+ seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+ show_max(seq, &brd->max);
+
+
+ return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+ .open = fops_board_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
+ seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
+ cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+ seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
+ seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+ seq_printf(seq, "\n");
+
+ show_max(seq, &cfg->max);
+
+ seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+ cfg->divs.h_divisor, cfg->divs.p_divisor,
+ cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+ seq_printf(seq, "\n");
+
+ seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+ return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+ .open = fops_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+ void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_iotimings *iot;
+ union s3c_iobank *iob;
+ int bank;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ show_bank = cfg->info->debug_io_show;
+ if (!show_bank) {
+ seq_printf(seq, "no code to show bank timing\n");
+ return 0;
+ }
+
+ iot = s3c_cpufreq_getiotimings();
+ if (!iot) {
+ seq_printf(seq, "no io timings registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ iob = &iot->bank[bank];
+
+ seq_printf(seq, "bank %d: ", bank);
+
+ if (!iob->io_2410) {
+ seq_printf(seq, "nothing set\n");
+ continue;
+ }
+
+ show_bank(seq, cfg, iob);
+ }
+
+ return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+ .open = fops_io_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+ dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+ if (IS_ERR(dbgfs_root)) {
+ printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+ return PTR_ERR(dbgfs_root);
+ }
+
+ dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+ NULL, &fops_io);
+
+ dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+ NULL, &fops_info);
+
+ dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+ NULL, &fops_board);
+
+ return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 0000000..4f1b789
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+ return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+ return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long fclk, pclk, hclk, armclk;
+
+ cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+ cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+ cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+ cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+ cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.frequency = fclk;
+
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+ cfg->divs.h_divisor = fclk / hclk;
+ cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long pll = cfg->pll.frequency;
+
+ cfg->freq.fclk = pll;
+ cfg->freq.hclk = pll / cfg->divs.h_divisor;
+ cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+ /* convert hclk into 10ths of nanoseconds for io calcs */
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+ int diff_cur = abs(target - c);
+ int diff_new = abs(target - n);
+
+ return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+ struct s3c_cpufreq_config *cfg)
+{
+ s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+ pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->divs.h_divisor,
+ cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->set_iotiming)
+ (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->calc_iotiming)
+ return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+ return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+ cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+ unsigned int freq)
+{
+ clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ struct cpufreq_frequency_table *pll)
+{
+ struct s3c_cpufreq_freqs freqs;
+ struct s3c_cpufreq_config cpu_new;
+ unsigned long flags;
+
+ cpu_new = cpu_cur; /* copy new from current */
+
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ /* TODO - check for DMA currently outstanding */
+
+ cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+ if (pll)
+ freqs.pll_changing = 1;
+
+ /* update our frequencies */
+
+ cpu_new.freq.armclk = target_freq;
+ cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+ if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+ printk(KERN_ERR "no divisors for %d\n", target_freq);
+ goto err_notpossible;
+ }
+
+ s3c_freq_dbg("%s: got divs\n", __func__);
+
+ s3c_cpufreq_calc(&cpu_new);
+
+ s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+ if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+ if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+ printk(KERN_ERR "%s: no IO timings\n", __func__);
+ goto err_notpossible;
+ }
+ }
+
+ s3c_cpufreq_show("new", &cpu_new);
+
+ /* setup our cpufreq parameters */
+
+ freqs.old = cpu_cur.freq;
+ freqs.new = cpu_new.freq;
+
+ freqs.freqs.cpu = 0;
+ freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+ freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+ /* update f/h/p clock settings before we issue the change
+ * notification, so that drivers do not need to do anything
+ * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+ s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+ s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+ s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+ s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+ /* start the frequency change */
+
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+ /* If hclk is staying the same, then we do not need to
+ * re-write the IO or the refresh timings whilst we are changing
+ * speed. */
+
+ local_irq_save(flags);
+
+ /* is our memory clock slowing down? */
+ if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+ /* not changing PLL, just set the divisors */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+ /* slow the cpu down, then set divisors */
+
+ s3c_cpufreq_setfvco(&cpu_new);
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ /* set the divisors, then speed up */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ s3c_cpufreq_setfvco(&cpu_new);
+ }
+ }
+
+ /* did our memory clock speed up */
+ if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ /* update our current settings */
+ cpu_cur = cpu_new;
+
+ local_irq_restore(flags);
+
+ /* notify everyone we've done this */
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+ s3c_freq_dbg("%s: finished\n", __func__);
+ return 0;
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *pll;
+ unsigned int index;
+
+ /* avoid repeated calls which cause a needless amout of duplicated
+ * logging output (and CPU time as the calculation process is
+ * done) */
+ if (target_freq == last_target)
+ return 0;
+
+ last_target = target_freq;
+
+ s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+ __func__, policy, target_freq, relation);
+
+ if (ftab) {
+ if (cpufreq_frequency_table_target(policy, ftab,
+ target_freq, relation,
+ &index)) {
+ s3c_freq_dbg("%s: table failed\n", __func__);
+ return -EINVAL;
+ }
+
+ s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+ target_freq, index, ftab[index].frequency);
+ target_freq = ftab[index].frequency;
+ }
+
+ target_freq *= 1000; /* convert target to Hz */
+
+ /* find the settings for our new frequency */
+
+ if (!pll_reg || cpu_cur.lock_pll) {
+ /* either we've not got any PLL values, or we've locked
+ * to the current one. */
+ pll = NULL;
+ } else {
+ struct cpufreq_policy tmp_policy;
+ int ret;
+
+ /* we keep the cpu pll table in Hz, to ensure we get an
+ * accurate value for the PLL output. */
+
+ tmp_policy.min = policy->min * 1000;
+ tmp_policy.max = policy->max * 1000;
+ tmp_policy.cpu = policy->cpu;
+
+ /* cpufreq_frequency_table_target uses a pointer to 'index'
+ * which is the number of the table entry, not the value of
+ * the table entry's index field. */
+
+ ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+ target_freq, relation,
+ &index);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: no PLL available\n", __func__);
+ goto err_notpossible;
+ }
+
+ pll = pll_reg + index;
+
+ s3c_freq_dbg("%s: target %u => %u\n",
+ __func__, target_freq, pll->frequency);
+
+ target_freq = pll->frequency;
+ }
+
+ return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+ return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, name);
+ if (IS_ERR(clk))
+ printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+ return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+ printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = s3c_cpufreq_get(0);
+ policy->min = policy->cpuinfo.min_freq = 0;
+ policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /* feed the latency information from the cpu driver */
+ policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+ if (ftab)
+ cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+ return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+ _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+ _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+ clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+ IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+ printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+ clk_get_rate(clk_fclk) / 1000,
+ clk_get_rate(clk_hclk) / 1000,
+ clk_get_rate(clk_pclk) / 1000,
+ clk_get_rate(clk_arm) / 1000);
+
+ return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+ suspend_pll.frequency = clk_get_rate(_clk_mpll);
+ suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+ suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+ return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+ last_target = ~0; /* invalidate last_target setting */
+
+ /* first, find out what speed we resumed at. */
+ s3c_cpufreq_resume_clocks();
+
+ /* whilst we will be called later on, we try and re-set the
+ * cpu frequencies as soon as possible so that we do not end
+ * up resuming devices and then immediatley having to re-set
+ * a number of settings once these devices have restarted.
+ *
+ * as a note, it is expected devices are not used until they
+ * have been un-suspended and at that time they should have
+ * used the updated clock settings.
+ */
+
+ ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = s3c_cpufreq_verify,
+ .target = s3c_cpufreq_target,
+ .get = s3c_cpufreq_get,
+ .init = s3c_cpufreq_init,
+ .suspend = s3c_cpufreq_suspend,
+ .resume = s3c_cpufreq_resume,
+ .name = "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+ if (!info || !info->name) {
+ printk(KERN_ERR "%s: failed to pass valid information\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+ info->name);
+
+ /* check our driver info has valid data */
+
+ BUG_ON(info->set_refresh == NULL);
+ BUG_ON(info->set_divs == NULL);
+ BUG_ON(info->calc_divs == NULL);
+
+ /* info->set_fvco is optional, depending on whether there
+ * is a need to set the clock code. */
+
+ cpu_cur.info = info;
+
+ /* Note, driver registering should probably update locktime */
+
+ return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+ struct s3c_cpufreq_board *ours;
+
+ if (!board) {
+ printk(KERN_INFO "%s: no board data\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Copy the board information so that each board can make this
+ * initdata. */
+
+ ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+ if (ours == NULL) {
+ printk(KERN_ERR "%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ *ours = *board;
+ cpu_cur.board = ours;
+
+ return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+ int ret;
+
+ if (!cpu_cur.info->get_iotiming) {
+ printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+ ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+ if (ret)
+ printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+ return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+ struct s3c_freq *a, struct s3c_freq *b)
+{
+ dst->fclk = do_min(a->fclk, b->fclk);
+ dst->hclk = do_min(a->hclk, b->hclk);
+ dst->pclk = do_min(a->pclk, b->pclk);
+ dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+ u32 result;
+
+ result = freq * time_us;
+ result = DIV_ROUND_UP(result, 1000 * 1000);
+
+ return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+ unsigned int bits = cpu_cur.info->locktime_bits;
+ u32 rate = (u32)clk_get_rate(_clk_xtal);
+ u32 val;
+
+ if (bits == 0) {
+ WARN_ON(1);
+ return;
+ }
+
+ val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+ val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+ printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+ __raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+ int size, ret;
+
+ if (!cpu_cur.info->calc_freqtable)
+ return -EINVAL;
+
+ kfree(ftab);
+ ftab = NULL;
+
+ size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+ size++;
+
+ ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+ if (!ftab) {
+ printk(KERN_ERR "%s: no memory for tables\n", __func__);
+ return -ENOMEM;
+ }
+
+ ftab_size = size;
+
+ ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+ s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+ return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+ int ret = 0;
+
+ if (cpu_cur.info && cpu_cur.board) {
+ ret = s3c_cpufreq_initclks();
+ if (ret)
+ goto out;
+
+ /* get current settings */
+ s3c_cpufreq_getcur(&cpu_cur);
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ if (cpu_cur.board->auto_io) {
+ ret = s3c_cpufreq_auto_io();
+ if (ret) {
+ printk(KERN_ERR "%s: failed to get io timing\n",
+ __func__);
+ goto out;
+ }
+ }
+
+ if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+ printk(KERN_ERR "%s: no IO support registered\n",
+ __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (!cpu_cur.info->need_pll)
+ cpu_cur.lock_pll = 1;
+
+ s3c_cpufreq_update_loctkime();
+
+ s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+ &cpu_cur.info->max);
+
+ if (cpu_cur.info->calc_freqtable)
+ s3c_cpufreq_build_freq();
+
+ ret = cpufreq_register_driver(&s3c24xx_driver);
+ }
+
+ out:
+ return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+ unsigned int plls_no)
+{
+ struct cpufreq_frequency_table *vals;
+ unsigned int size;
+
+ size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+ vals = kmalloc(size, GFP_KERNEL);
+ if (vals) {
+ memcpy(vals, plls, size);
+ pll_reg = vals;
+
+ /* write a terminating entry, we don't store it in the
+ * table that is stored in the kernel */
+ vals += plls_no;
+ vals->frequency = CPUFREQ_TABLE_END;
+
+ printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+ } else
+ printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+ return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e..5447e60 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
- .init = s3c2410_init,
+ .init = s3c2410a_init,
.name = name_s3c2410a
},
{
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c..f52a92c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
#include <asm/mach/irq.h>
#include <mach/fb.h>
#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/regs-serial.h>
@@ -180,25 +182,6 @@
}
}
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
- [0] = {
- .start = S3C24XX_PA_NAND,
- .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
/* USB Device (Gadget)*/
static struct resource s3c_usbgadget_resource[] = {
@@ -348,7 +331,7 @@
/* HWMON */
struct platform_device s3c_device_hwmon = {
- .name = "s3c24xx-hwmon",
+ .name = "s3c-hwmon",
.id = -1,
.dev.parent = &s3c_device_adc.dev,
};
@@ -473,4 +456,52 @@
EXPORT_SYMBOL(s3c_device_camif);
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+ [0] = {
+ .start = S3C2440_PA_AC97,
+ .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3C244x_AC97,
+ .end = IRQ_S3C244x_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "PCM out",
+ .start = DMACH_PCM_OUT,
+ .end = DMACH_PCM_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .name = "PCM in",
+ .start = DMACH_PCM_IN,
+ .end = DMACH_PCM_IN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .name = "Mic in",
+ .start = DMACH_MIC_IN,
+ .end = DMACH_MIC_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &s3c_device_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 0000000..efeb025
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,282 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+ unsigned long bankcon;
+ unsigned int tacp;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh; /* nCS hold afrer nOE/nWE */
+ unsigned int tcah; /* Address hold after nCS */
+ unsigned char nwait_en; /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+ unsigned int idcy;
+ unsigned int wstrd;
+ unsigned int wstwr;
+ unsigned int wstoen;
+ unsigned int wstwen;
+ unsigned int wstbrd;
+
+ /* register cache */
+ unsigned char smbidcyr;
+ unsigned char smbwstrd;
+ unsigned char smbwstwr;
+ unsigned char smbwstoen;
+ unsigned char smbwstwen;
+ unsigned char smbwstbrd;
+};
+
+union s3c_iobank {
+ struct s3c2410_iobank_timing *io_2410;
+ struct s3c2412_iobank_timing *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+ union s3c_iobank bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+ struct s3c_pllval *vals;
+ int size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+ struct s3c_freq freq;
+ struct s3c_freq max;
+ struct cpufreq_frequency_table pll;
+ struct s3c_clkdivs divs;
+ struct s3c_cpufreq_info *info; /* for core, not drivers */
+ struct s3c_cpufreq_board *board;
+
+ unsigned int lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * any frequency changes. This is really only need by devices like the
+ * S3C2410 where there is no or limited divider between the PLL and the
+ * ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ * from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ * from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ * current frequency configuration. If the table passed in is NULL,
+ * then the return is the number of elements to be filled for allocation
+ * of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+ const char *name;
+ struct s3c_freq max;
+
+ unsigned int latency;
+
+ unsigned int locktime_m;
+ unsigned int locktime_u;
+ unsigned char locktime_bits;
+
+ unsigned int need_pll:1;
+
+ /* driver routines */
+
+ void (*resume_clocks)(void);
+
+ int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *t,
+ size_t table_size);
+
+ void (*debug_io_show)(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+ void (*set_refresh)(struct s3c_cpufreq_config *cfg);
+ void (*set_fvco)(struct s3c_cpufreq_config *cfg);
+ void (*set_divs)(struct s3c_cpufreq_config *cfg);
+ int (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+ int index, size_t table_size,
+ unsigned int freq)
+{
+ if (index < 0)
+ return index;
+
+ if (table) {
+ if (index >= table_size)
+ return -ENOMEM;
+
+ s3c_freq_dbg("%s: { %d = %u kHz }\n",
+ __func__, index, freq);
+
+ table[index].index = index;
+ table[index].frequency = freq;
+ }
+
+ return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 0000000..8521b83
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e2..b6deeef 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
#ifdef CONFIG_CPU_S3C2410
extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
extern void s3c2410_map_io(void);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 9587377..d02f5f0 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@
}
}
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return -EINVAL;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ __raw_writel(intmod, S3C2410_INTMOD);
+ return 0;
+}
+#endif
+
+
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@
int irqno;
int i;
+#ifdef CONFIG_FIQ
+ init_FIQ();
+#endif
+
irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
/* first, clear all interrupts pending... */
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
deleted file mode 100644
index 82a6d4d..0000000
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/* arch/arm/plat-s3c24xx/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C24XX PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
- struct list_head list;
- struct platform_device *pdev;
-
- struct clk *clk_div;
- struct clk *clk;
- const char *label;
-
- unsigned int period_ns;
- unsigned int duty_ns;
-
- unsigned char tcon_base;
- unsigned char running;
- unsigned char use_count;
- unsigned char pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq) \
- (struct resource [TIMER_RESOURCE_SIZE]) { \
- [0] = { \
- .start = _irq, \
- .end = _irq, \
- .flags = IORESOURCE_IRQ \
- } \
- }
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq) \
- .name = "s3c24xx-pwm", \
- .id = _tmr_no, \
- .num_resources = TIMER_RESOURCE_SIZE, \
- .resource = TIMER_RESOURCE(_tmr_no, _irq), \
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
- [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
- [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
- [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
- [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
- [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
- return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, list) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count = 1;
- pwm->label = label;
- } else
- pwm = ERR_PTR(-EBUSY);
- } else
- pwm = ERR_PTR(-ENOENT);
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else
- printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
- mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
- unsigned long flags;
- unsigned long tcon;
-
- local_irq_save(flags);
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_start(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
- pwm->running = 1;
- return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- unsigned long flags;
- unsigned long tcon;
-
- local_irq_save(flags);
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon &= ~pwm_tcon_start(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
- pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
- unsigned long tin_parent_rate;
- unsigned int div;
-
- tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
- pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
- for (div = 2; div <= 16; div *= 2) {
- if ((tin_parent_rate / (div << 16)) < freq)
- return tin_parent_rate / div;
- }
-
- return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long tin_rate;
- unsigned long tin_ns;
- unsigned long period;
- unsigned long flags;
- unsigned long tcon;
- unsigned long tcnt;
- long tcmp;
-
- /* We currently avoid using 64bit arithmetic by using the
- * fact that anything faster than 1Hz is easily representable
- * by 32bits. */
-
- if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
- return -ERANGE;
-
- if (duty_ns > period_ns)
- return -EINVAL;
-
- if (period_ns == pwm->period_ns &&
- duty_ns == pwm->duty_ns)
- return 0;
-
- /* The TCMP and TCNT can be read without a lock, they're not
- * shared between the timers. */
-
- tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
- tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
- period = NS_IN_HZ / period_ns;
-
- pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
- duty_ns, period_ns, period);
-
- /* Check to see if we are changing the clock rate of the PWM */
-
- if (pwm->period_ns != period_ns) {
- if (pwm_is_tdiv(pwm)) {
- tin_rate = pwm_calc_tin(pwm, period);
- clk_set_rate(pwm->clk_div, tin_rate);
- } else
- tin_rate = clk_get_rate(pwm->clk);
-
- pwm->period_ns = period_ns;
-
- pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
- tin_ns = NS_IN_HZ / tin_rate;
- tcnt = period_ns / tin_ns;
- } else
- tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
- /* Note, counters count down */
-
- tcmp = duty_ns / tin_ns;
- tcmp = tcnt - tcmp;
- /* the pwm hw only checks the compare register after a decrement,
- so the pin never toggles if tcmp = tcnt */
- if (tcmp == tcnt)
- tcmp--;
-
- pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
- if (tcmp < 0)
- tcmp = 0;
-
- /* Update the PWM register block. */
-
- local_irq_save(flags);
-
- __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
- __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_manulupdate(pwm);
- tcon |= pwm_tcon_autoreload(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- tcon &= ~pwm_tcon_manulupdate(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
- pwm->duty_ns = -1;
- pwm->period_ns = -1;
-
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->list, &pwm_list);
- mutex_unlock(&pwm_lock);
-
- return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct pwm_device *pwm;
- unsigned long flags;
- unsigned long tcon;
- unsigned int id = pdev->id;
- int ret;
-
- if (id == 4) {
- dev_err(dev, "TIMER4 is currently not supported\n");
- return -ENXIO;
- }
-
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
- dev_err(dev, "failed to allocate pwm_device\n");
- return -ENOMEM;
- }
-
- pwm->pdev = pdev;
- pwm->pwm_id = id;
-
- /* calculate base of control bits in TCON */
- pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
- pwm->clk = clk_get(dev, "pwm-tin");
- if (IS_ERR(pwm->clk)) {
- dev_err(dev, "failed to get pwm tin clk\n");
- ret = PTR_ERR(pwm->clk);
- goto err_alloc;
- }
-
- pwm->clk_div = clk_get(dev, "pwm-tdiv");
- if (IS_ERR(pwm->clk_div)) {
- dev_err(dev, "failed to get pwm tdiv clk\n");
- ret = PTR_ERR(pwm->clk_div);
- goto err_clk_tin;
- }
-
- local_irq_save(flags);
-
- tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_invert(pwm);
- __raw_writel(tcon, S3C2410_TCON);
-
- local_irq_restore(flags);
-
-
- ret = pwm_register(pwm);
- if (ret) {
- dev_err(dev, "failed to register pwm\n");
- goto err_clk_tdiv;
- }
-
- pwm_dbg(pwm, "config bits %02x\n",
- (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
- dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
- clk_get_rate(pwm->clk),
- clk_get_rate(pwm->clk_div),
- pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
- platform_set_drvdata(pdev, pwm);
- return 0;
-
- err_clk_tdiv:
- clk_put(pwm->clk_div);
-
- err_clk_tin:
- clk_put(pwm->clk);
-
- err_alloc:
- kfree(pwm);
- return ret;
-}
-
-static int s3c_pwm_remove(struct platform_device *pdev)
-{
- struct pwm_device *pwm = platform_get_drvdata(pdev);
-
- clk_put(pwm->clk_div);
- clk_put(pwm->clk);
- kfree(pwm);
-
- return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
- .driver = {
- .name = "s3c24xx-pwm",
- .owner = THIS_MODULE,
- },
- .probe = s3c_pwm_probe,
- .remove = __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
- int ret;
-
- clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
- clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
- if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
- printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
- return -EINVAL;
- }
-
- ret = platform_driver_register(&s3c_pwm_driver);
- if (ret)
- printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
- return ret;
-}
-
-arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 0000000..43ea801
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+ unsigned long refval;
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh = (1 << 11) + 1 - refresh;
+
+ s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+ refval = __raw_readl(S3C2410_REFRESH);
+ refval &= ~((1 << 12) - 1);
+ refval |= refresh;
+ __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+ __raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 0000000..d0a3a14
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = timings->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+ "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+ }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+ return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+ return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+ if (cyc == 0)
+ return 0;
+
+ return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+ unsigned long *v, int shift)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+ __func__, cyc, hclk_tns, shift, div);
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+ case 1:
+ val = 1;
+ break;
+ case 2:
+ val = 2;
+ break;
+ case 3:
+ case 4:
+ val = 3;
+ break;
+ default:
+ return -1;
+ }
+
+ *v |= val << shift;
+ return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+ /* Currently no support for Tacp calculations. */
+ return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+ unsigned long hclk_tns, unsigned long *v)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+ __func__, cyc, nwait_en, hclk_tns, div);
+
+ /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+ if (nwait_en && div < 4)
+ div = 4;
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ val = div - 1;
+ break;
+
+ case 5:
+ case 6:
+ val = 4;
+ break;
+
+ case 7:
+ case 8:
+ val = 5;
+ break;
+
+ case 9:
+ case 10:
+ val = 6;
+ break;
+
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ val = 7;
+ break;
+
+ default:
+ return -1;
+ }
+
+ *v |= val << 8;
+ return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned long res;
+ int ret;
+
+ res = bt->bankcon;
+ res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+ /* tacp: 2,3,4,5 */
+ /* tcah: 0,1,2,4 */
+ /* tcoh: 0,1,2,4 */
+ /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+ /* tcos: 0,1,2,4 */
+ /* tacs: 0,1,2,4 */
+
+ ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+ ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+ ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+ ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+ if (ret)
+ return -EINVAL;
+
+ ret |= calc_tacp(bt->tacp, hclk, &res);
+ ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+ if (ret)
+ return -EINVAL;
+
+ bt->bankcon = res;
+ return 0;
+}
+
+static unsigned int tacc_tab[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 3,
+ [3] = 4,
+ [4] = 6,
+ [5] = 9,
+ [6] = 10,
+ [7] = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 7;
+ return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 3;
+ return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+
+ bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2410_iobank_timing *bt = iob->io_2410;
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh;
+ unsigned int tcah;
+
+ seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+ tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+ seq_printf(seq,
+ "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+
+ seq_printf(seq,
+ "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(tacs),
+ print_ns(tcos),
+ print_ns(tacc),
+ print_ns(tcoh),
+ print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+ bt = iot->bank[bank].io_2410;
+
+ if (!bt)
+ continue;
+
+ bt->bankcon = bankcon;
+
+ ret = s3c2410_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+
+ s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+ __func__, bank, bt->bankcon);
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ __raw_writel(bt->bankcon, bank_reg(bank));
+ }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ unsigned long bwscon;
+ int bank;
+
+ bwscon = __raw_readl(S3C2410_BWSCON);
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+
+ if (!bank_is_io(bankcon))
+ continue;
+
+ s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+ __func__, bank, bankcon);
+
+ bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* find out in nWait is enabled for bank. */
+
+ if (bank != 0) {
+ unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
+ if (tmp & S3C2410_BWSCON_WS)
+ bt->nwait_en = 1;
+ }
+
+ timings->bank[bank].io_2410 = bt;
+ bt->bankcon = bankcon;
+
+ s3c2410_iotiming_getbank(cfg, bt);
+ }
+
+ s3c2410_print_timing("get", timings);
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 0000000..fd45e47f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ unsigned int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+ }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+ return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+ unsigned int *err)
+{
+ unsigned int ret = to_div(hwtm, clk_tns);
+
+ if (ret > 0xf)
+ *err = -EINVAL;
+
+ return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt)
+{
+ unsigned int hclk = cfg->freq.hclk_tns;
+ int err = 0;
+
+ bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+ bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+ bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+ bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+ bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+ bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+ return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+ seq_printf(seq,
+ "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ ret = s3c2412_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ void __iomem *regs;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ regs = S3C2412_SSMC_BANK(bank);
+
+ __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+ __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+ __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+ __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+ __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+ __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+ }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+ return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt,
+ unsigned int bank)
+{
+ unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
+ void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+ bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+ bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+ bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+ bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+ bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+ if (bank < 2)
+ return true;
+
+ return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2412_iobank_timing *bt;
+ u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+ unsigned int bank;
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ if (!bank_is_io(bank, bankcfg))
+ continue;
+
+ bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ timings->bank[bank].io_2412 = bt;
+ s3c2412_iotiming_getbank(cfg, bt, bank);
+ }
+
+ s3c2412_print_timing("get", timings);
+ return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ u32 refresh;
+
+ WARN_ON(board == NULL);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh &= ((1 << 16) - 1);
+
+ s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 0000000..ae2e6c6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+ long diff = a - b;
+
+ return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv;
+ unsigned long hclk, fclk, armclk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+ __func__, fclk, armclk, hclk_max);
+
+ if (armclk > fclk) {
+ printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+ armclk = fclk;
+ }
+
+ /* if we are in DVS, we need HCLK to be <= ARMCLK */
+ if (armclk < fclk && armclk < hclk_max)
+ hclk_max = armclk;
+
+ for (hdiv = 1; hdiv < 9; hdiv++) {
+ if (hdiv == 5 || hdiv == 7)
+ hdiv++;
+
+ hclk = (fclk / hdiv);
+ if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+ break;
+ }
+
+ s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+ if (hdiv > 8)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* calculate a valid armclk */
+
+ if (armclk < hclk)
+ armclk = hclk;
+
+ /* if we're running armclk lower than fclk, this really means
+ * that the system should go into dvs mode, which means that
+ * armclk is connected to hclk. */
+ if (armclk < fclk) {
+ cfg->divs.dvs = 1;
+ armclk = hclk;
+ } else
+ cfg->divs.dvs = 0;
+
+ cfg->freq.armclk = armclk;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv;
+ cfg->divs.p_divisor = pdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+ S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv, camdiv;
+
+ s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+ cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+ camdiv &= ~CAMDIVN_HCLK_HALF;
+
+ switch (cfg->divs.h_divisor) {
+ case 1:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+ break;
+
+ case 2:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+ break;
+
+ case 6:
+ camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+ case 3:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+ break;
+
+ case 8:
+ camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+ case 4:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+ break;
+
+ default:
+ BUG(); /* we don't expect to get here. */
+ }
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+ /* todo - set pclk. */
+
+ /* Write the divisors first with hclk intentionally halved so that
+ * when we write clkdiv we will under-frequency instead of over. We
+ * then make a short delay and remove the hclk halving if necessary.
+ */
+
+ __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ ndelay(20);
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+ int *divs,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ unsigned long freq;
+ int index = 0;
+ int div;
+
+ for (div = *divs; div > 0; div = *divs++) {
+ freq = fclk / div;
+
+ if (freq > max_hclk && div != 1)
+ continue;
+
+ freq /= 1000; /* table is in kHz */
+ index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+ if (index < 0)
+ break;
+ }
+
+ return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ int ret;
+
+ WARN_ON(cfg->info == NULL);
+ WARN_ON(cfg->board == NULL);
+
+ ret = run_freq_for(cfg->info->max.hclk,
+ cfg->info->max.fclk,
+ hclk_divs,
+ table, table_size);
+
+ s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+ return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+ .max = {
+ .fclk = 400000000,
+ .hclk = 133333333,
+ .pclk = 66666666,
+ },
+
+ .locktime_m = 300,
+ .locktime_u = 300,
+ .locktime_bits = 16,
+
+ .name = "s3c244x",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .set_fvco = s3c2410_set_fvco,
+
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2440_cpufreq_setdivs,
+ .calc_divs = s3c2440_cpufreq_calcdivs,
+ .calc_freqtable = s3c2440_cpufreq_calctable,
+
+ .resume_clocks = s3c244x_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+ xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+ return -ENOENT;
+ }
+
+ return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 0000000..ff9443b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+ { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
+ { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
+ { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
+ { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
+ { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
+ { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
+ { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
+ { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
+ { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
+ { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
+ { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
+ { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
+ { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
+ { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
+ { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
+ { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
+ { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
+ { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
+ { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
+ { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
+ { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
+ { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
+ { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
+ { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
+ { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
+ { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
+ { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 12000000) {
+ printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_12,
+ ARRAY_SIZE(s3c2440_plls_12));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 0000000..7679af1
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+ { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
+ { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
+ { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
+ { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
+ { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
+ { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
+ { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
+ { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
+ { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
+ { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
+ { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
+ { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
+ { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
+ { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
+ { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
+ { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
+ { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
+ { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
+ { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
+ { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
+ { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
+ { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
+ { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
+ { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
+ { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
+ { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
+ { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
+ { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
+ { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
+ { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
+ { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
+ { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
+ { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
+ { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
+ { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
+ { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
+ { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
+ { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
+ { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
+ { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
+ { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
+ { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
+ { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
+ { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
+ { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
+ { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
+ { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
+ { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
+ { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
+ { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
+ { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
+ { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
+ { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
+ { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
+ { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 169344000) {
+ printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_169344,
+ ARRAY_SIZE(s3c2440_plls_169344));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 0000000..89fcf53
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable)
+{
+
+ printk(KERN_INFO "%s(%d)\n", __func__, enable);
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+ }
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b4..bcfa778 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
+ select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
help
Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882c..b85b435 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-audio.c
rename to arch/arm/plat-s3c64xx/dev-audio.c
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 0000000..a8a711c
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+ bool
+ depends on ARCH_S5PC1XX
+ default y
+ select PLAT_S3C
+ select ARM_VIC
+ select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ help
+ Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+ bool
+ help
+ Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+ bool
+ help
+ Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 0000000..f1ecb2c
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n := dummy.o
+obj- :=
+
+# Core files
+
+obj-y += dev-uart.o
+obj-y += cpu.o
+obj-y += irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 0000000..715a733
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = 0x43100000,
+ .idmask = 0xfffff000,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
+ .length = SZ_16,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_CLK,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_PWR,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S5PC1XX_VA_UART),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ },
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+ unsigned long idcode;
+
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+ iotable_init(mach_desc, size);
+
+ idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+ s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 0000000..f749bc5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART0,
+ .end = S3C_PA_UART0 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_RX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX0,
+ .end = IRQ_S3CUART_TX0,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART1,
+ .end = S3C_PA_UART1 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_RX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX1,
+ .end = IRQ_S3CUART_TX1,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART2,
+ .end = S3C_PA_UART2 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_RX2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX2,
+ .end = IRQ_S3CUART_TX2,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART3,
+ .end = S3C_PA_UART3 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX3,
+ .end = IRQ_S3CUART_RX3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX3,
+ .end = IRQ_S3CUART_TX3,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR3,
+ .end = IRQ_S3CUART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s5pc1xx_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
+ },
+ [1] = {
+ .resources = s5pc1xx_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
+ },
+ [2] = {
+ .resources = s5pc1xx_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
+ },
+ [3] = {
+ .resources = s5pc1xx_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
+ },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 0000000..f07d8c3
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET (32)
+
+#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE S3C_IRQ(0)
+#define S3C_VIC1_BASE S3C_IRQ(32)
+#define S3C_VIC2_BASE S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0 (16)
+#define IRQ_S3CUART_BASE1 (20)
+#define IRQ_S3CUART_BASE2 (24)
+#define IRQ_S3CUART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+#define UART_IRQ_MODEM (3)
+
+#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S3C_EINT(x)
+
+#define NR_IRQS (IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 0000000..21afef1
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT (16)
+#define S5P_PLL_PDIV_SHIFT (8)
+#define S5P_PLL_SDIV_SHIFT (0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+ u32 pllcon)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+ pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+ sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 0000000..75c8390
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN (1<<31)
+#define S5PC1XX_EPLL_MASK 0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT (0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8)
+#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT (12)
+#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT (16)
+#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT (20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK (0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT (0)
+#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT (4)
+#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT (8)
+#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT (12)
+#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT (16)
+#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT (20)
+#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT (0)
+#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT (4)
+#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT (8)
+#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT (12)
+#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT (16)
+#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT (20)
+#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT (24)
+#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT (28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT (0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4)
+#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT (8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20)
+#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT (24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT (0)
+#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT (4)
+#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT (8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
+#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK (0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT (0)
+#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
+#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
+#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT (12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
+#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT (20)
+#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT (24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK (0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT (0)
+#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT (4)
+#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT (8)
+#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT (12)
+#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT (16)
+#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT (20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT (0)
+#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT (4)
+#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT (8)
+#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT (12)
+#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT (16)
+#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT (20)
+#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT (24)
+#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT (28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT (0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4)
+#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT (8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC (1<<0)
+#define S5PC100_CLKGATE_D00_TZIC (1<<1)
+#define S5PC100_CLKGATE_D00_CFCON (1<<2)
+#define S5PC100_CLKGATE_D00_MDMA (1<<3)
+#define S5PC100_CLKGATE_D00_G2D (1<<4)
+#define S5PC100_CLKGATE_D00_SECSS (1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC (1<<0)
+#define S5PC100_CLKGATE_D01_SROMC (1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
+#define S5PC100_CLKGATE_D01_NFCON (1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
+#define S5PC100_CLKGATE_D01_EBI (1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
+#define S5PC100_CLKGATE_D02_SDM (1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD (1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
+#define S5PC100_CLKGATE_D11_JPEG (1<<5)
+#define S5PC100_CLKGATE_D11_DSI (1<<6)
+#define S5PC100_CLKGATE_D11_CSI (1<<7)
+#define S5PC100_CLKGATE_D11_G3D (1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV (1<<0)
+#define S5PC100_CLKGATE_D12_VP (1<<1)
+#define S5PC100_CLKGATE_D12_MIXER (1<<2)
+#define S5PC100_CLKGATE_D12_HDMI (1<<3)
+#define S5PC100_CLKGATE_D12_MFC (1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
+#define S5PC100_CLKGATE_D13_GPIO (1<<1)
+#define S5PC100_CLKGATE_D13_APC (1<<2)
+#define S5PC100_CLKGATE_D13_IEC (1<<3)
+#define S5PC100_CLKGATE_D13_PWM (1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
+#define S5PC100_CLKGATE_D13_WDT (1<<8)
+#define S5PC100_CLKGATE_D13_RTC (1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0 (1<<0)
+#define S5PC100_CLKGATE_D14_UART1 (1<<1)
+#define S5PC100_CLKGATE_D14_UART2 (1<<2)
+#define S5PC100_CLKGATE_D14_UART3 (1<<3)
+#define S5PC100_CLKGATE_D14_IIC (1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
+#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
+#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
+#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
+#define S5PC100_CLKGATE_D14_IRDA (1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
+#define S5PC100_CLKGATE_D14_HSITX (1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
+#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
+#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
+#define S5PC100_CLKGATE_D15_AC97 (1<<3)
+#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
+#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
+#define S5PC100_CLKGATE_D15_TSADC (1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
+#define S5PC100_CLKGATE_D15_CG (1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0)
+#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1)
+#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
+#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
+#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
+#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
+#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
+#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
+#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
+#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
+#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
+#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
+#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
+#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
+#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
+#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
+#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
+#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
+#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
+#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
+#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
+#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
+#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
+#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
+#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
+#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
+#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
+#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
+#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
+#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN (~(3<<5))
+#define S5PC100_CFG_WFI_IDLE (1<<5)
+#define S5PC100_CFG_WFI_STOP (2<<5)
+#define S5PC100_CFG_WFI_SLEEP (3<<5)
+
+#define S5PC100_OTHER_SYS_INT 24
+#define S5PC100_OTHER_STA_TYPE 23
+#define STA_TYPE_EXPON 0
+#define STA_TYPE_SFR 1
+
+#define S5PC100_PWR_STA_EXP_SCALE 0
+#define S5PC100_PWR_STA_CNT 4
+
+#define S5PC100_PWR_STABLE_COUNT 85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN 0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 0000000..45e2751
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 0000000..80d6dd9
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+ generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg &= ~(1 << (irq - IRQ_TIMER0));
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg |= 1 << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f;
+ reg |= (1 << 5) << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+ .name = "s3c-timer",
+ .mask = s3c_irq_timer_mask,
+ .unmask = s3c_irq_timer_unmask,
+ .ack = s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+ void __iomem *regs;
+ unsigned int base_irq;
+ unsigned int parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+ [0] = {
+ .regs = (void *)S3C_VA_UART0,
+ .base_irq = IRQ_S3CUART_BASE0,
+ .parent_irq = IRQ_UART0,
+ },
+ [1] = {
+ .regs = (void *)S3C_VA_UART1,
+ .base_irq = IRQ_S3CUART_BASE1,
+ .parent_irq = IRQ_UART1,
+ },
+ [2] = {
+ .regs = (void *)S3C_VA_UART2,
+ .base_irq = IRQ_S3CUART_BASE2,
+ .parent_irq = IRQ_UART2,
+ },
+ [3] = {
+ .regs = (void *)S3C_VA_UART3,
+ .base_irq = IRQ_S3CUART_BASE3,
+ .parent_irq = IRQ_UART3,
+ },
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+ struct uart_irq *uirq = get_irq_chip_data(irq);
+ return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+ return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP 0x30
+#define S3C64XX_UINTSP 0x34
+#define S3C64XX_UINTM 0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg &= ~(1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+ struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+ u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+ int base = uirq->base_irq;
+
+ if (pend & (1 << 0))
+ generic_handle_irq(base);
+ if (pend & (1 << 1))
+ generic_handle_irq(base + 1);
+ if (pend & (1 << 2))
+ generic_handle_irq(base + 2);
+ if (pend & (1 << 3))
+ generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+ .name = "s3c-uart",
+ .mask = s3c_irq_uart_mask,
+ .unmask = s3c_irq_uart_unmask,
+ .mask_ack = s3c_irq_uart_maskack,
+ .ack = s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+ void __iomem *reg_base = uirq->regs;
+ unsigned int irq;
+ int offs;
+
+ /* mask all interrupts at the start. */
+ __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+ for (offs = 0; offs < 3; offs++) {
+ irq = uirq->base_irq + offs;
+
+ set_irq_chip(irq, &s3c_irq_uart);
+ set_irq_chip_data(irq, uirq);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+ int i;
+ int uart, irq;
+
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ for (i = 0; i < num; i++)
+ vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+ vic_valid[i], 0);
+
+ /* add the timer sub-irqs */
+
+ set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+ set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+ set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+ set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+ set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+ for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+ set_irq_chip(irq, &s3c_irq_timer);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+ s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 0000000..6b24035
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll clk_mpll
+
+struct clk_sources {
+ unsigned int nr_sources;
+ struct clk **sources;
+};
+
+struct clksrc_clk {
+ struct clk clk;
+ unsigned int mask;
+ unsigned int shift;
+
+ struct clk_sources *sources;
+
+ unsigned int divider_shift;
+ void __iomem *reg_divider;
+ void __iomem *reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 1;
+}
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5PC1XX_CLK_SRC1);
+ if (enable)
+ val |= S5PC100_CLKSRC1_CLK48M_MASK;
+ else
+ val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+ __raw_writel(val, S5PC1XX_CLK_SRC1);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+ .name = "clk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+struct clk clk_hpll = {
+ .name = "hpll",
+ .id = -1,
+};
+
+struct clk clk_hd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+ struct clk *clk,
+ int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "dsi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_DSI,
+ }, {
+ .name = "csi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_CSI,
+ }, {
+ .name = "ccan0",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
+ }, {
+ .name = "ccan1",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "hclkd2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
+ }, {
+ .name = "iis-d2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
+ },
+};
+
+static struct clk init_clocks[] = {
+ /* System1 (D0_0) devices */
+ {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_INTC,
+ }, {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
+ }, {
+ .name = "cf-ata",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_G2D,
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
+ }, {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
+ },
+
+ /* Memory (D0_1) devices */
+ {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_DMC,
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
+ }, {
+ .name = "onenand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
+ }, {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_EBI,
+ },
+
+ /* System2 (D0_2) devices */
+ {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_pd0,
+ .enable = s5pc1xx_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SDM,
+ },
+
+ /* File (D1_0) devices */
+ {
+ .name = "pdma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
+ }, {
+ .name = "pdma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
+ }, {
+ .name = "modem",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
+ },
+
+ /* Multimedia1 (D1_1) devices */
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_LCD,
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
+ }, {
+ .name = "g3d",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_G3D,
+ },
+
+ /* Multimedia2 (D1_2) devices */
+ {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_TV,
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_VP,
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MFC,
+ },
+
+ /* System (D1_3) devices */
+ {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_APC,
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_IEC,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_PWM,
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_WDT,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_RTC,
+ },
+
+ /* Connectivity (D1_4) devices */
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART3,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IIC,
+ }, {
+ .name = "hdmi-i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
+ },
+
+ /* Audio (D1_5) devices */
+ {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_AC97,
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
+ }, {
+ .name = "keyif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "cg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_CG,
+ },
+
+ /* Audio (D2_0) devices: all disabled */
+
+ /* Special Clocks 1 */
+ {
+ .name = "sclk_hpm",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM,
+ }, {
+ .name = "sclk_onenand",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
+ },
+
+ /* Special Clocks 2 */
+ {
+ .name = "sclk_tv_54",
+ .id = -1,
+ .parent = &clk_54m,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54,
+ }, {
+ .name = "sclk_vdac_54",
+ .id = -1,
+ .parent = &clk_54m,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54,
+ }, {
+ .name = "sclk_spdif",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF,
+ },
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_APLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_APLL_MASK,
+ .sources = &clk_src_apll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+ .name = "fout_epll",
+ .id = -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_EPLL_MASK,
+ .sources = &clk_src_epll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_MPLL_MASK,
+ .sources = &clk_src_mpll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+ rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+ return rate;
+}
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .get_rate = s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+ rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+ return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+ .name = "dout_mpll2",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .get_rate = s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ NULL,
+ NULL
+};
+
+static struct clk_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+ return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+ clkdiv >>= sclk->divider_shift;
+ clkdiv &= 0xf;
+ clkdiv++;
+
+ rate /= clkdiv;
+ return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ void __iomem *reg = sclk->reg_divider;
+ unsigned int div;
+ u32 val;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
+
+ val = __raw_readl(reg);
+ val &= ~(0xf << sclk->shift);
+ val |= (div - 1) << sclk->shift;
+ __raw_writel(val, reg);
+
+ return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ struct clk_sources *srcs = sclk->sources;
+ u32 clksrc = __raw_readl(sclk->reg_source);
+ int src_nr = -1;
+ int ptr;
+
+ for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+ if (srcs->sources[ptr] == parent) {
+ src_nr = ptr;
+ break;
+ }
+
+ if (src_nr >= 0) {
+ clksrc &= ~sclk->mask;
+ clksrc |= src_nr << sclk->shift;
+
+ __raw_writel(clksrc, sclk->reg_source);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ rate = parent_rate;
+ else {
+ div = rate / parent_rate;
+
+ if (div == 0)
+ div = 1;
+ if (div > 16)
+ div = 16;
+
+ rate = parent_rate / div;
+ }
+
+ return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .set_parent = s5pc1xx_setparent_clksrc,
+ .get_rate = s5pc1xx_getrate_clksrc,
+ .set_rate = s5pc1xx_setrate_clksrc,
+ .round_rate = s5pc1xx_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_UART_SHIFT,
+ .mask = S5PC100_CLKSRC1_UART_MASK,
+ .sources = &clkset_uart,
+ .divider_shift = S5PC100_CLKDIV2_UART_SHIFT,
+ .reg_divider = S5PC1XX_CLK_DIV2,
+ .reg_source = S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+ struct clk_sources *srcs = clk->sources;
+ u32 clksrc = __raw_readl(clk->reg_source);
+
+ clksrc &= clk->mask;
+ clksrc >>= clk->shift;
+
+ if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+ printk(KERN_ERR "%s: bad source %d\n",
+ clk->clk.name, clksrc);
+ return;
+ }
+
+ clk->clk.parent = srcs->sources[clksrc];
+
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long hclkd0;
+ unsigned long hclk;
+ unsigned long pclkd0;
+ unsigned long pclk;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long hpll;
+ unsigned long epll;
+ unsigned int ptr;
+ u32 clkdiv0, clkdiv1;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+ clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+ __func__, clkdiv0, clkdiv1);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+ mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+ epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+ hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+ printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+ apll, mpll, epll, hpll);
+
+ armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+ armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+ hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+ pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+ hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+ pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+ printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+ armclk, hclkd0, pclkd0, hclk, pclk);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_apll.rate = apll;
+
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_mout_epll.clk,
+ &clk_fout_epll,
+ &clk_mout_mpll.clk,
+ &clk_dout_mpll,
+ &clk_uart_uclk1.clk,
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+ clkp = clks[ptr];
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clk_mpll.parent = &clk_mout_mpll.clk;
+ clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 0000000..c587108
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */
+ s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 0000000..3d00c02
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 0000000..c8f3ca4
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ /* Pin configuration would be needed */
+}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026ef..c8c55b4 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Sat Sep 12 12:00:16 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1769,7 +1769,7 @@
mi424wr MACH_MI424WR MI424WR 1778
axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779
at572d940deb MACH_AT572D940DEB AT572D940DEB 1780
-davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781
+davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781
ep9302 MACH_EP9302 EP9302 1782
at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
cybook3 MACH_CYBOOK3 CYBOOK3 1784
@@ -1962,7 +1962,7 @@
arm11 MACH_ARM11 ARM11 1972
cpuat9260 MACH_CPUAT9260 CPUAT9260 1973
cpupxa255 MACH_CPUPXA255 CPUPXA255 1974
-cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
+eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975
cheflux MACH_CHEFLUX CHEFLUX 1976
eb_cpux9k2 MACH_EB_CPUX9K2 EB_CPUX9K2 1977
opcotec MACH_OPCOTEC OPCOTEC 1978
@@ -2249,14 +2249,14 @@
darwin MACH_DARWIN DARWIN 2262
oratiscomu MACH_ORATISCOMU ORATISCOMU 2263
rtsbc20 MACH_RTSBC20 RTSBC20 2264
-i780 MACH_I780 I780 2265
+sgh_i780 MACH_I780 I780 2265
gemini324 MACH_GEMINI324 GEMINI324 2266
oratislan MACH_ORATISLAN ORATISLAN 2267
oratisalog MACH_ORATISALOG ORATISALOG 2268
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
-v2p_ca9 MACH_V2P_CA9 V2P_CA9 2272
+v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
@@ -2280,3 +2280,132 @@
htctopaz MACH_HTCTOPAZ HTCTOPAZ 2293
matrix504 MACH_MATRIX504 MATRIX504 2294
mrfsa MACH_MRFSA MRFSA 2295
+sc_p270 MACH_SC_P270 SC_P270 2296
+atlas5_evb MACH_ATLAS5_EVB ATLAS5_EVB 2297
+pelco_lobox MACH_PELCO_LOBOX PELCO_LOBOX 2298
+dilax_pcu200 MACH_DILAX_PCU200 DILAX_PCU200 2299
+leonardo MACH_LEONARDO LEONARDO 2300
+zoran_approach7 MACH_ZORAN_APPROACH7 ZORAN_APPROACH7 2301
+dp6xx MACH_DP6XX DP6XX 2302
+bcm2153_vesper MACH_BCM2153_VESPER BCM2153_VESPER 2303
+mahimahi MACH_MAHIMAHI MAHIMAHI 2304
+clickc MACH_CLICKC CLICKC 2305
+zb_gateway MACH_ZB_GATEWAY ZB_GATEWAY 2306
+tazcard MACH_TAZCARD TAZCARD 2307
+tazdev MACH_TAZDEV TAZDEV 2308
+annax_cb_arm MACH_ANNAX_CB_ARM ANNAX_CB_ARM 2309
+annax_dm3 MACH_ANNAX_DM3 ANNAX_DM3 2310
+cerebric MACH_CEREBRIC CEREBRIC 2311
+orca MACH_ORCA ORCA 2312
+pc9260 MACH_PC9260 PC9260 2313
+ems285a MACH_EMS285A EMS285A 2314
+gec2410 MACH_GEC2410 GEC2410 2315
+gec2440 MACH_GEC2440 GEC2440 2316
+mw903 MACH_ARCH_MW903 ARCH_MW903 2317
+mw2440 MACH_MW2440 MW2440 2318
+ecac2378 MACH_ECAC2378 ECAC2378 2319
+tazkiosk MACH_TAZKIOSK TAZKIOSK 2320
+whiterabbit_mch MACH_WHITERABBIT_MCH WHITERABBIT_MCH 2321
+sbox9263 MACH_SBOX9263 SBOX9263 2322
+oreo MACH_OREO OREO 2323
+smdk6442 MACH_SMDK6442 SMDK6442 2324
+openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325
+incredible MACH_INCREDIBLE INCREDIBLE 2326
+incrediblec MACH_INCREDIBLEC INCREDIBLEC 2327
+heroct MACH_HEROCT HEROCT 2328
+mmnet1000 MACH_MMNET1000 MMNET1000 2329
+devkit8000 MACH_DEVKIT8000 DEVKIT8000 2330
+devkit9000 MACH_DEVKIT9000 DEVKIT9000 2331
+mx31txtr MACH_MX31TXTR MX31TXTR 2332
+u380 MACH_U380 U380 2333
+oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
+npcmx50 MACH_NPCMX50 NPCMX50 2335
+mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
+riom MACH_RIOM RIOM 2338
+comcas MACH_COMCAS COMCAS 2339
+wsi_mx27 MACH_WSI_MX27 WSI_MX27 2340
+cm_t35 MACH_CM_T35 CM_T35 2341
+net2big MACH_NET2BIG NET2BIG 2342
+motorola_a1600 MACH_MOTOROLA_A1600 MOTOROLA_A1600 2343
+igep0020 MACH_IGEP0020 IGEP0020 2344
+igep0010 MACH_IGEP0010 IGEP0010 2345
+mv6281gtwge2 MACH_MV6281GTWGE2 MV6281GTWGE2 2346
+scat100 MACH_SCAT100 SCAT100 2347
+sanmina MACH_SANMINA SANMINA 2348
+momento MACH_MOMENTO MOMENTO 2349
+nuc9xx MACH_NUC9XX NUC9XX 2350
+nuc910evb MACH_NUC910EVB NUC910EVB 2351
+nuc920evb MACH_NUC920EVB NUC920EVB 2352
+nuc950evb MACH_NUC950EVB NUC950EVB 2353
+nuc945evb MACH_NUC945EVB NUC945EVB 2354
+nuc960evb MACH_NUC960EVB NUC960EVB 2355
+nuc932evb MACH_NUC932EVB NUC932EVB 2356
+nuc900 MACH_NUC900 NUC900 2357
+sd1soc MACH_SD1SOC SD1SOC 2358
+ln2440bc MACH_LN2440BC LN2440BC 2359
+rsbc MACH_RSBC RSBC 2360
+openrd_client MACH_OPENRD_CLIENT OPENRD_CLIENT 2361
+hpipaq11x MACH_HPIPAQ11X HPIPAQ11X 2362
+wayland MACH_WAYLAND WAYLAND 2363
+acnbsx102 MACH_ACNBSX102 ACNBSX102 2364
+hwat91 MACH_HWAT91 HWAT91 2365
+at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366
+csb732 MACH_CSB732 CSB732 2367
+u8500 MACH_U8500 U8500 2368
+huqiu MACH_HUQIU HUQIU 2369
+mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+pmt1g MACH_PMT1G PMT1G 2371
+htcelf MACH_HTCELF HTCELF 2372
+armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
+armadillo440 MACH_ARMADILLO440 ARMADILLO440 2374
+u_chip_dual_arm MACH_U_CHIP_DUAL_ARM U_CHIP_DUAL_ARM 2375
+csr_bdb3 MACH_CSR_BDB3 CSR_BDB3 2376
+dolby_cat1018 MACH_DOLBY_CAT1018 DOLBY_CAT1018 2377
+hy9307 MACH_HY9307 HY9307 2378
+aspire_easystore MACH_A_ES A_ES 2379
+davinci_irif MACH_DAVINCI_IRIF DAVINCI_IRIF 2380
+agama9263 MACH_AGAMA9263 AGAMA9263 2381
+marvell_jasper MACH_MARVELL_JASPER MARVELL_JASPER 2382
+flint MACH_FLINT FLINT 2383
+tavorevb3 MACH_TAVOREVB3 TAVOREVB3 2384
+sch_m490 MACH_SCH_M490 SCH_M490 2386
+rbl01 MACH_RBL01 RBL01 2387
+omnifi MACH_OMNIFI OMNIFI 2388
+otavalo MACH_OTAVALO OTAVALO 2389
+sienna MACH_SIENNA SIENNA 2390
+htc_excalibur_s620 MACH_HTC_EXCALIBUR_S620 HTC_EXCALIBUR_S620 2391
+htc_opal MACH_HTC_OPAL HTC_OPAL 2392
+touchbook MACH_TOUCHBOOK TOUCHBOOK 2393
+latte MACH_LATTE LATTE 2394
+xa200 MACH_XA200 XA200 2395
+nimrod MACH_NIMROD NIMROD 2396
+cc9p9215_3g MACH_CC9P9215_3G CC9P9215_3G 2397
+cc9p9215_3gjs MACH_CC9P9215_3GJS CC9P9215_3GJS 2398
+tk71 MACH_TK71 TK71 2399
+comham3525 MACH_COMHAM3525 COMHAM3525 2400
+mx31erebus MACH_MX31EREBUS MX31EREBUS 2401
+mcardmx27 MACH_MCARDMX27 MCARDMX27 2402
+paradise MACH_PARADISE PARADISE 2403
+tide MACH_TIDE TIDE 2404
+wzl2440 MACH_WZL2440 WZL2440 2405
+sdrdemo MACH_SDRDEMO SDRDEMO 2406
+ethercan2 MACH_ETHERCAN2 ETHERCAN2 2407
+ecmimg20 MACH_ECMIMG20 ECMIMG20 2408
+omap_dragon MACH_OMAP_DRAGON OMAP_DRAGON 2409
+halo MACH_HALO HALO 2410
+huangshan MACH_HUANGSHAN HUANGSHAN 2411
+vl_ma2sc MACH_VL_MA2SC VL_MA2SC 2412
+raumfeld_rc MACH_RAUMFELD_RC RAUMFELD_RC 2413
+raumfeld_connector MACH_RAUMFELD_CONNECTOR RAUMFELD_CONNECTOR 2414
+raumfeld_speaker MACH_RAUMFELD_SPEAKER RAUMFELD_SPEAKER 2415
+multibus_master MACH_MULTIBUS_MASTER MULTIBUS_MASTER 2416
+multibus_pbk MACH_MULTIBUS_PBK MULTIBUS_PBK 2417
+tnetv107x MACH_TNETV107X TNETV107X 2418
+snake MACH_SNAKE SNAKE 2419
+cwmx27 MACH_CWMX27 CWMX27 2420
+sch_m480 MACH_SCH_M480 SCH_M480 2421
+platypus MACH_PLATYPUS PLATYPUS 2422
+pss2 MACH_PSS2 PSS2 2423
+davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424
+str9100 MACH_STR9100 STR9100 2425
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62..4fa9903 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@
mov pc, lr
ENDPROC(vfp_null_entry)
+ .align 2
.LCvfp:
.word vfp_vector
@@ -61,6 +62,7 @@
mov pc, r9 @ we have handled the fault
ENDPROC(vfp_testing_entry)
+ .align 2
VFP_arch_address:
.word VFP_arch
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38..66dc2d0 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@
last_VFP_context_address:
.word last_VFP_context
-ENTRY(vfp_get_float)
- add pc, pc, r0, lsl #3
+ .macro tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+ adr \tmp, 1f
+ add \tmp, \tmp, \base, lsl \shift
+ mov pc, \tmp
+#else
+ add pc, pc, \base, lsl \shift
mov r0, r0
+#endif
+1:
+ .endm
+
+ENTRY(vfp_get_float)
+ tbl_branch r0, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
+1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0
mov pc, lr
- mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
+ .org 1b + 8
+1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1
mov pc, lr
+ .org 1b + 8
.endr
ENDPROC(vfp_get_float)
ENTRY(vfp_put_float)
- add pc, pc, r1, lsl #3
- mov r0, r0
+ tbl_branch r1, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
+1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0
mov pc, lr
- mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
+ .org 1b + 8
+1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1
mov pc, lr
+ .org 1b + 8
.endr
ENDPROC(vfp_put_float)
ENTRY(vfp_get_double)
- add pc, pc, r0, lsl #3
- mov r0, r0
+ tbl_branch r0, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- fmrrd r0, r1, d\dr
+1: fmrrd r0, r1, d\dr
mov pc, lr
+ .org 1b + 8
.endr
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
+1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
mov pc, lr
+ .org 1b + 8
.endr
#endif
@@ -253,17 +268,18 @@
ENDPROC(vfp_get_double)
ENTRY(vfp_put_double)
- add pc, pc, r2, lsl #3
- mov r0, r0
+ tbl_branch r2, r3, #3
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- fmdrr d\dr, r0, r1
+1: fmdrr d\dr, r0, r1
mov pc, lr
+ .org 1b + 8
.endr
#ifdef CONFIG_VFPv3
@ d16 - d31 registers
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+1: mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
mov pc, lr
+ .org 1b + 8
.endr
#endif
ENDPROC(vfp_put_double)
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 46c9b0a..75f19f4 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -72,6 +72,10 @@
.debounce_max = 20,
.debounce_rep = 4,
.debounce_tol = 5,
+
+ .keep_vref_on = true,
+ .settle_delay_usecs = 500,
+ .penirq_recheck_delay_usecs = 100,
};
static struct spi_board_info __initdata spi1_board_info[] = {
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index 04c8606..fe863f9 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -57,4 +57,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index fc42de5..fd0c5d7 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -84,6 +84,7 @@
#define TIF_MEMDIE 6
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
+#define TIF_NOTIFY_RESUME 9 /* callback before returning to user */
#define TIF_FREEZE 29
#define TIF_DEBUG 30 /* debugging enabled */
#define TIF_USERSPACE 31 /* true if FS sets userspace */
@@ -96,6 +97,7 @@
#define _TIF_MEMDIE (1 << TIF_MEMDIE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1 << TIF_FREEZE)
/* Note: The masks below must never span more than 16 bits! */
@@ -103,13 +105,15 @@
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
((1 << TIF_SIGPENDING) \
+ | _TIF_NOTIFY_RESUME \
| (1 << TIF_NEED_RESCHED) \
| (1 << TIF_POLLING_NRFLAG) \
| (1 << TIF_BREAKPOINT) \
| (1 << TIF_RESTORE_SIGMASK))
/* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE) | \
+ _TIF_NOTIFY_RESUME)
/* work to do on return from debug mode */
#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 009a801..169268c 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -281,7 +281,7 @@
ld.w r1, r0[TI_flags]
rjmp 1b
-2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NOTIFY_RESUME
tst r1, r2
breq 3f
unmask_interrupts
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 2722756..64f886f 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -16,6 +16,7 @@
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/freezer.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/ucontext.h>
@@ -322,4 +323,11 @@
if (ti->flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, ¤t->blocked, syscall);
+
+ if (ti->flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S
index 0abb261..c2ca49d 100644
--- a/arch/avr32/lib/memcpy.S
+++ b/arch/avr32/lib/memcpy.S
@@ -24,8 +24,8 @@
brne 1f
/* At this point, "from" is word-aligned */
-2: sub r10, 4
- mov r9, r12
+2: mov r9, r12
+5: sub r10, 4
brlt 4f
3: ld.w r8, r11++
@@ -49,6 +49,7 @@
/* Handle unaligned "from" pointer */
1: sub r10, 4
+ movlt r9, r12
brlt 4b
add r10, r9
lsl r9, 2
@@ -59,4 +60,13 @@
st.b r12++, r8
ld.ub r8, r11++
st.b r12++, r8
- rjmp 2b
+ mov r8, r12
+ add pc, pc, r9
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ sub r8, 1
+ nop
+ mov r9, r8
+ rjmp 5b
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index d5cf740..45ec49b 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -59,6 +59,9 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index b326023..48b0f39 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -16,6 +16,7 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
+#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
@@ -36,4 +37,11 @@
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(canrestart,regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 57c3d40..2dea726 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -57,5 +57,8 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 4a7a62c..6b0a2b6 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -572,6 +572,8 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(__frame);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
} /* end do_notify_resume() */
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 602518a7..1547f01 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -57,4 +57,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 8bbc8b0..70e67e47 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -89,6 +89,7 @@
TIF_NEED_RESCHED */
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
#define TIF_FREEZE 16 /* is freezing for suspend */
/* as above, but as bit values */
@@ -97,6 +98,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index cf3472f..af842c3 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -39,6 +39,7 @@
#include <linux/tty.h>
#include <linux/binfmts.h>
#include <linux/freezer.h>
+#include <linux/tracehook.h>
#include <asm/setup.h>
#include <asm/uaccess.h>
@@ -552,4 +553,11 @@
{
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs, NULL);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index e4d8fde..7e81966 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -412,7 +412,7 @@
*/
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static inline struct sk_buff *
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 5a61b5c..8d3c79c 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -44,7 +44,6 @@
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#define get_dma_ops(dev) platform_dma_get_ops(dev)
-#define flush_write_buffers()
#include <asm-generic/dma-mapping-common.h>
@@ -69,6 +68,24 @@
return 0;
}
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ return addr + size <= *dev->dma_mask;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr;
+}
+
extern int dma_get_cache_alignment(void);
static inline void
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 5f43697..d9b6325 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -235,7 +235,8 @@
#define KVM_REQ_PTC_G 32
#define KVM_REQ_RESUME 33
-#define KVM_PAGES_PER_HPAGE 1
+#define KVM_NR_PAGE_SIZES 1
+#define KVM_PAGES_PER_HPAGE(x) 1
struct kvm;
struct kvm_vcpu;
@@ -465,7 +466,6 @@
unsigned long metaphysical_rr4;
unsigned long vmm_init_rr;
- int online_vcpus;
int is_sn2;
struct kvm_ioapic *vioapic;
diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
index 0d6d8ca..1588aee 100644
--- a/arch/ia64/include/asm/kvm_para.h
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -19,9 +19,13 @@
*
*/
+#ifdef __KERNEL__
+
static inline unsigned int kvm_arch_para_features(void)
{
return 0;
}
#endif
+
+#endif
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 7454212..0b0d5ff 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -66,4 +66,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 39a3cd0..f2c1600 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -10,7 +10,9 @@
static int __init dma_init(void)
{
- dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+ return 0;
}
fs_initcall(dma_init);
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 23f846d..e6c5c3d 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -34,6 +34,7 @@
#include <asm/mca_asm.h>
#include <linux/init.h>
#include <linux/linkage.h>
+#include "head.h"
#ifdef CONFIG_HOTPLUG_CPU
#define SAL_PSR_BITS_TO_SET \
diff --git a/arch/ia64/kernel/head.h b/arch/ia64/kernel/head.h
new file mode 100644
index 0000000..2e2ac68
--- /dev/null
+++ b/arch/ia64/kernel/head.h
@@ -0,0 +1 @@
+extern void console_print(const char *s);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 5d7c0e5..9bcec99 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -161,6 +161,13 @@
show_stack(NULL, NULL);
}
+/* local support for deprecated console_print */
+void
+console_print(const char *s)
+{
+ printk(KERN_EMERG "%s", s);
+}
+
void
do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
{
@@ -192,6 +199,8 @@
if (test_thread_flag(TIF_NOTIFY_RESUME)) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(&scr->pt);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
/* copy user rbs to kernel rbs */
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index 64d5209..ef3e7be 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -1,12 +1,8 @@
#
# KVM configuration
#
-config HAVE_KVM
- bool
-config HAVE_KVM_IRQCHIP
- bool
- default y
+source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
@@ -28,6 +24,8 @@
depends on PCI
select PREEMPT_NOTIFIERS
select ANON_INODES
+ select HAVE_KVM_IRQCHIP
+ select KVM_APIC_ARCHITECTURE
---help---
Support hosting fully virtualized guest machines using hardware
virtualization extensions. You will need a fairly recent
@@ -49,9 +47,6 @@
Provides support for KVM on Itanium 2 processors equipped with the VT
extensions.
-config KVM_TRACE
- bool
-
source drivers/virtio/Kconfig
endif # VIRTUALIZATION
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 80c57b0..0ad09f0 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -210,16 +210,6 @@
}
-static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
- gpa_t addr, int len, int is_write)
-{
- struct kvm_io_device *dev;
-
- dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
-
- return dev;
-}
-
static int handle_vm_error(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
@@ -231,6 +221,7 @@
{
struct kvm_mmio_req *p;
struct kvm_io_device *mmio_dev;
+ int r;
p = kvm_get_vcpu_ioreq(vcpu);
@@ -247,16 +238,13 @@
kvm_run->exit_reason = KVM_EXIT_MMIO;
return 0;
mmio:
- mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
- if (mmio_dev) {
- if (!p->dir)
- kvm_iodevice_write(mmio_dev, p->addr, p->size,
- &p->data);
- else
- kvm_iodevice_read(mmio_dev, p->addr, p->size,
- &p->data);
-
- } else
+ if (p->dir)
+ r = kvm_io_bus_read(&vcpu->kvm->mmio_bus, p->addr,
+ p->size, &p->data);
+ else
+ r = kvm_io_bus_write(&vcpu->kvm->mmio_bus, p->addr,
+ p->size, &p->data);
+ if (r)
printk(KERN_ERR"kvm: No iodevice found! addr:%lx\n", p->addr);
p->state = STATE_IORESP_READY;
@@ -337,13 +325,12 @@
{
union ia64_lid lid;
int i;
+ struct kvm_vcpu *vcpu;
- for (i = 0; i < kvm->arch.online_vcpus; i++) {
- if (kvm->vcpus[i]) {
- lid.val = VCPU_LID(kvm->vcpus[i]);
- if (lid.id == id && lid.eid == eid)
- return kvm->vcpus[i];
- }
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ lid.val = VCPU_LID(vcpu);
+ if (lid.id == id && lid.eid == eid)
+ return vcpu;
}
return NULL;
@@ -409,21 +396,21 @@
struct kvm *kvm = vcpu->kvm;
struct call_data call_data;
int i;
+ struct kvm_vcpu *vcpui;
call_data.ptc_g_data = p->u.ptc_g_data;
- for (i = 0; i < kvm->arch.online_vcpus; i++) {
- if (!kvm->vcpus[i] || kvm->vcpus[i]->arch.mp_state ==
- KVM_MP_STATE_UNINITIALIZED ||
- vcpu == kvm->vcpus[i])
+ kvm_for_each_vcpu(i, vcpui, kvm) {
+ if (vcpui->arch.mp_state == KVM_MP_STATE_UNINITIALIZED ||
+ vcpu == vcpui)
continue;
- if (waitqueue_active(&kvm->vcpus[i]->wq))
- wake_up_interruptible(&kvm->vcpus[i]->wq);
+ if (waitqueue_active(&vcpui->wq))
+ wake_up_interruptible(&vcpui->wq);
- if (kvm->vcpus[i]->cpu != -1) {
- call_data.vcpu = kvm->vcpus[i];
- smp_call_function_single(kvm->vcpus[i]->cpu,
+ if (vcpui->cpu != -1) {
+ call_data.vcpu = vcpui;
+ smp_call_function_single(vcpui->cpu,
vcpu_global_purge, &call_data, 1);
} else
printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n");
@@ -852,8 +839,6 @@
kvm_init_vm(kvm);
- kvm->arch.online_vcpus = 0;
-
return kvm;
}
@@ -1000,10 +985,10 @@
goto out;
if (irqchip_in_kernel(kvm)) {
__s32 status;
- mutex_lock(&kvm->lock);
+ mutex_lock(&kvm->irq_lock);
status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
irq_event.irq, irq_event.level);
- mutex_unlock(&kvm->lock);
+ mutex_unlock(&kvm->irq_lock);
if (ioctl == KVM_IRQ_LINE_STATUS) {
irq_event.status = status;
if (copy_to_user(argp, &irq_event,
@@ -1216,7 +1201,7 @@
if (IS_ERR(vmm_vcpu))
return PTR_ERR(vmm_vcpu);
- if (vcpu->vcpu_id == 0) {
+ if (kvm_vcpu_is_bsp(vcpu)) {
vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
/*Set entry address for first run.*/
@@ -1224,7 +1209,7 @@
/*Initialize itc offset for vcpus*/
itc_offset = 0UL - kvm_get_itc(vcpu);
- for (i = 0; i < kvm->arch.online_vcpus; i++) {
+ for (i = 0; i < KVM_MAX_VCPUS; i++) {
v = (struct kvm_vcpu *)((char *)vcpu +
sizeof(struct kvm_vcpu_data) * i);
v->arch.itc_offset = itc_offset;
@@ -1356,8 +1341,6 @@
goto fail;
}
- kvm->arch.online_vcpus++;
-
return vcpu;
fail:
return ERR_PTR(r);
@@ -1952,19 +1935,6 @@
return find_highest_bits((int *)&vpd->irr[0]);
}
-int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
-{
- if (kvm_highest_pending_irq(vcpu) != -1)
- return 1;
- return 0;
-}
-
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
- /* do real check here */
- return 1;
-}
-
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return vcpu->arch.timer_fired;
@@ -1977,7 +1947,8 @@
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
{
- return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE;
+ return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE) ||
+ (kvm_highest_pending_irq(vcpu) != -1);
}
int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index cc406d0..dce75b70 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -830,8 +830,8 @@
kvm = (struct kvm *)KVM_VM_BASE;
- if (vcpu->vcpu_id == 0) {
- for (i = 0; i < kvm->arch.online_vcpus; i++) {
+ if (kvm_vcpu_is_bsp(vcpu)) {
+ for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
v = (struct kvm_vcpu *)((char *)vcpu +
sizeof(struct kvm_vcpu_data) * i);
VMX(v, itc_offset) = itc_offset;
diff --git a/arch/ia64/lib/ip_fast_csum.S b/arch/ia64/lib/ip_fast_csum.S
index 1f86aeb..620d9dc 100644
--- a/arch/ia64/lib/ip_fast_csum.S
+++ b/arch/ia64/lib/ip_fast_csum.S
@@ -96,20 +96,22 @@
GLOBAL_ENTRY(csum_ipv6_magic)
ld4 r20=[in0],4
ld4 r21=[in1],4
- dep r15=in3,in2,32,16
+ zxt4 in2=in2
;;
ld4 r22=[in0],4
ld4 r23=[in1],4
- mux1 r15=r15,@rev
+ dep r15=in3,in2,32,16
;;
ld4 r24=[in0],4
ld4 r25=[in1],4
- shr.u r15=r15,16
+ mux1 r15=r15,@rev
add r16=r20,r21
add r17=r22,r23
+ zxt4 in4=in4
;;
ld4 r26=[in0],4
ld4 r27=[in1],4
+ shr.u r15=r15,16
add r18=r24,r25
add r8=r16,r17
;;
diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
index fb83326..dbeadb9 100644
--- a/arch/ia64/xen/time.c
+++ b/arch/ia64/xen/time.c
@@ -133,8 +133,7 @@
account_idle_ticks(blocked);
run_local_timers();
- if (rcu_pending(cpu))
- rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
+ rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
scheduler_tick();
run_posix_cpu_timers(p);
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index be7ed58..3390a86 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -57,4 +57,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 07bb5bd..7157815 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -149,6 +149,7 @@
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
#define TIF_IRET 4 /* return with iret */
+#define TIF_NOTIFY_RESUME 5 /* callback before returning to user */
#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
@@ -160,6 +161,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_IRET (1<<TIF_IRET)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 1812454..144b0f12 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -21,6 +21,7 @@
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/freezer.h>
+#include <linux/tracehook.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
@@ -408,5 +409,12 @@
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs,oldset);
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
+
clear_thread_flag(TIF_IRET);
}
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 6e56275..6c74751 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -574,10 +574,11 @@
tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ --cnt;
}
if (!cnt)
@@ -649,10 +650,11 @@
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ --cnt;
}
if (!cnt)
diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
index 5202f5a..4741258 100644
--- a/arch/m68k/include/asm/entry_mm.h
+++ b/arch/m68k/include/asm/entry_mm.h
@@ -46,7 +46,6 @@
#define curptr a2
LFLUSH_I_AND_D = 0x00000808
-LSIGTRAP = 5
/* process bits for task_struct.ptrace */
PT_TRACESYS_OFF = 3
@@ -118,9 +117,6 @@
#define STR(X) STR1(X)
#define STR1(X) #X
-#define PT_OFF_ORIG_D0 0x24
-#define PT_OFF_FORMATVEC 0x32
-#define PT_OFF_SR 0x2C
#define SAVE_ALL_INT \
"clrl %%sp@-;" /* stk_adj */ \
"pea -1:w;" /* orig d0 = -1 */ \
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
index c2553d2..907ed03 100644
--- a/arch/m68k/include/asm/entry_no.h
+++ b/arch/m68k/include/asm/entry_no.h
@@ -72,8 +72,8 @@
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
movel sw_usp,%a0 /* get usp */
- movel %a0@-,%sp@(PT_PC) /* copy exception program counter */
- movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+ movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
+ movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
bra 7f
6:
clrl %sp@- /* stkadj */
@@ -89,8 +89,8 @@
bnes 8f /* no, skip */
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+ movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h
index ddfab96..5e9249b 100644
--- a/arch/m68k/include/asm/math-emu.h
+++ b/arch/m68k/include/asm/math-emu.h
@@ -145,16 +145,16 @@
* these are only used during instruction decoding
* where we always know how deep we're on the stack.
*/
-#define FPS_DO (PT_D0)
-#define FPS_D1 (PT_D1)
-#define FPS_D2 (PT_D2)
-#define FPS_A0 (PT_A0)
-#define FPS_A1 (PT_A1)
-#define FPS_A2 (PT_A2)
-#define FPS_SR (PT_SR)
-#define FPS_PC (PT_PC)
-#define FPS_EA (PT_PC+6)
-#define FPS_PC2 (PT_PC+10)
+#define FPS_DO (PT_OFF_D0)
+#define FPS_D1 (PT_OFF_D1)
+#define FPS_D2 (PT_OFF_D2)
+#define FPS_A0 (PT_OFF_A0)
+#define FPS_A1 (PT_OFF_A1)
+#define FPS_A2 (PT_OFF_A2)
+#define FPS_SR (PT_OFF_SR)
+#define FPS_PC (PT_OFF_PC)
+#define FPS_EA (PT_OFF_PC+6)
+#define FPS_PC2 (PT_OFF_PC+10)
.macro fp_get_fp_reg
lea (FPD_FPREG,FPDATA,%d0.w*4),%a0
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index 15ee4c7..2f02f26 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -36,12 +36,10 @@
return NULL;
pte = kmap(page);
- if (pte) {
- __flush_page_to_ram(pte);
- flush_tlb_kernel_page(pte);
- nocache_page(pte);
- }
- kunmap(pte);
+ __flush_page_to_ram(pte);
+ flush_tlb_kernel_page(pte);
+ nocache_page(pte);
+ kunmap(page);
pgtable_page_ctor(page);
return page;
}
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 0b604f0..fe60e1a 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -135,8 +135,6 @@
#endif
#ifndef __ASSEMBLY__
-#include <asm-generic/pgtable.h>
-
/*
* Macro to mark a page protection value as "uncacheable".
*/
@@ -154,6 +152,7 @@
? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \
: (prot)))
+#include <asm-generic/pgtable.h>
#endif /* !__ASSEMBLY__ */
/*
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index ca87f93..eee01cc 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -57,4 +57,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index 6ea5c33..b6da388 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -1,6 +1,10 @@
#ifndef _ASM_M68K_THREAD_INFO_H
#define _ASM_M68K_THREAD_INFO_H
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/current.h>
#include <asm/types.h>
#include <asm/page.h>
@@ -31,7 +35,12 @@
#define init_thread_info (init_task.thread.info)
#define init_stack (init_thread_union.stack)
-#define task_thread_info(tsk) (&(tsk)->thread.info)
+#ifdef ASM_OFFSETS_C
+#define task_thread_info(tsk) ((struct thread_info *) NULL)
+#else
+#define task_thread_info(tsk) ((struct thread_info *)((char *)tsk+TASK_TINFO))
+#endif
+
#define task_stack_page(tsk) ((tsk)->stack)
#define current_thread_info() task_thread_info(current)
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index aa29a86..946d869 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -334,10 +334,12 @@
#define __NR_inotify_init1 328
#define __NR_preadv 329
#define __NR_pwritev 330
+#define __NR_rt_tgsigqueueinfo 331
+#define __NR_perf_counter_open 332
#ifdef __KERNEL__
-#define NR_syscalls 331
+#define NR_syscalls 333
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index b1f012f..73e5e58 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -8,6 +8,8 @@
* #defines from the assembly-language output.
*/
+#define ASM_OFFSETS_C
+
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
@@ -27,6 +29,9 @@
DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_MMU
+ DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
+#endif
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
@@ -44,20 +49,20 @@
DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
/* offsets into the pt_regs */
- DEFINE(PT_D0, offsetof(struct pt_regs, d0));
- DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
- DEFINE(PT_D1, offsetof(struct pt_regs, d1));
- DEFINE(PT_D2, offsetof(struct pt_regs, d2));
- DEFINE(PT_D3, offsetof(struct pt_regs, d3));
- DEFINE(PT_D4, offsetof(struct pt_regs, d4));
- DEFINE(PT_D5, offsetof(struct pt_regs, d5));
- DEFINE(PT_A0, offsetof(struct pt_regs, a0));
- DEFINE(PT_A1, offsetof(struct pt_regs, a1));
- DEFINE(PT_A2, offsetof(struct pt_regs, a2));
- DEFINE(PT_PC, offsetof(struct pt_regs, pc));
- DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+ DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+ DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+ DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+ DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+ DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+ DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+ DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+ DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+ DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+ DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+ DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
/* bitfields are a bit difficult */
- DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+ DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
/* offsets into the irq_handler struct */
DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
@@ -84,10 +89,10 @@
DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref));
/* signal defines */
- DEFINE(SIGSEGV, SIGSEGV);
- DEFINE(SEGV_MAPERR, SEGV_MAPERR);
- DEFINE(SIGTRAP, SIGTRAP);
- DEFINE(TRAP_TRACE, TRAP_TRACE);
+ DEFINE(LSIGSEGV, SIGSEGV);
+ DEFINE(LSEGV_MAPERR, SEGV_MAPERR);
+ DEFINE(LSIGTRAP, SIGTRAP);
+ DEFINE(LTRAP_TRACE, TRAP_TRACE);
/* offsets into the custom struct */
DEFINE(CUSTOMBASE, &amiga_custom);
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 8744f60..922f52e 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -77,17 +77,17 @@
jra .Lret_from_exception
do_trace_entry:
- movel #-ENOSYS,%sp@(PT_D0) | needed for strace
+ movel #-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
subql #4,%sp
SAVE_SWITCH_STACK
jbsr syscall_trace
RESTORE_SWITCH_STACK
addql #4,%sp
- movel %sp@(PT_ORIG_D0),%d0
+ movel %sp@(PT_OFF_ORIG_D0),%d0
cmpl #NR_syscalls,%d0
jcs syscall
badsys:
- movel #-ENOSYS,%sp@(PT_D0)
+ movel #-ENOSYS,%sp@(PT_OFF_D0)
jra ret_from_syscall
do_trace_exit:
@@ -103,7 +103,7 @@
addql #4,%sp
/* on 68040 complete pending writebacks if any */
#ifdef CONFIG_M68040
- bfextu %sp@(PT_VECTOR){#0,#4},%d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0
subql #7,%d0 | bus error frame ?
jbne 1f
movel %sp,%sp@-
@@ -127,7 +127,7 @@
jcc badsys
syscall:
jbsr @(sys_call_table,%d0:l:4)@(0)
- movel %d0,%sp@(PT_D0) | save the return value
+ movel %d0,%sp@(PT_OFF_D0) | save the return value
ret_from_syscall:
|oriw #0x0700,%sr
movew %curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
@@ -135,7 +135,7 @@
1: RESTORE_ALL
syscall_exit_work:
- btst #5,%sp@(PT_SR) | check if returning to kernel
+ btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
bnes 1b | if so, skip resched, signals
lslw #1,%d0
jcs do_trace_exit
@@ -148,7 +148,7 @@
ENTRY(ret_from_exception)
.Lret_from_exception:
- btst #5,%sp@(PT_SR) | check if returning to kernel
+ btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
bnes 1f | if so, skip resched, signals
| only allow interrupts when we are really the last one on the
| kernel stack, otherwise stack overflow can occur during
@@ -182,7 +182,7 @@
jbra resume_userspace
do_delayed_trace:
- bclr #7,%sp@(PT_SR) | clear trace bit in SR
+ bclr #7,%sp@(PT_OFF_SR) | clear trace bit in SR
pea 1 | send SIGTRAP
movel %curptr,%sp@-
pea LSIGTRAP
@@ -199,7 +199,7 @@
GET_CURRENT(%d0)
addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
| put exception # in d0
- bfextu %sp@(PT_VECTOR){#4,#10},%d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
subw #VEC_SPUR,%d0
movel %sp,%sp@-
@@ -216,7 +216,7 @@
ALIGN
ret_from_last_interrupt:
moveq #(~ALLOWINT>>8)&0xff,%d0
- andb %sp@(PT_SR),%d0
+ andb %sp@(PT_OFF_SR),%d0
jne 2b
/* check if we need to do software interrupts */
@@ -232,7 +232,7 @@
GET_CURRENT(%d0)
addqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
| put exception # in d0
- bfextu %sp@(PT_VECTOR){#4,#10},%d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
user_irqvec_fixup = . + 2
subw #VEC_USER,%d0
@@ -755,4 +755,6 @@
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 330 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
diff --git a/arch/m68k/math-emu/fp_entry.S b/arch/m68k/math-emu/fp_entry.S
index 954b4f3..a3fe1f3 100644
--- a/arch/m68k/math-emu/fp_entry.S
+++ b/arch/m68k/math-emu/fp_entry.S
@@ -85,8 +85,8 @@
fp_err_ua1:
addq.l #4,%sp
move.l %a0,-(%sp)
- pea SEGV_MAPERR
- pea SIGSEGV
+ pea LSEGV_MAPERR
+ pea LSIGSEGV
jsr fpemu_signal
add.w #12,%sp
jra ret_from_exception
@@ -96,8 +96,8 @@
| it does not really belong here, but...
fp_sendtrace060:
move.l (FPS_PC,%sp),-(%sp)
- pea TRAP_TRACE
- pea SIGTRAP
+ pea LTRAP_TRACE
+ pea LSIGTRAP
jsr fpemu_signal
add.w #12,%sp
jra ret_from_exception
@@ -122,17 +122,17 @@
.long fp_get_d6, fp_get_d7
fp_get_d0:
- move.l (PT_D0+8,%sp),%d0
+ move.l (PT_OFF_D0+8,%sp),%d0
printf PREGISTER,"{d0->%08x}",1,%d0
rts
fp_get_d1:
- move.l (PT_D1+8,%sp),%d0
+ move.l (PT_OFF_D1+8,%sp),%d0
printf PREGISTER,"{d1->%08x}",1,%d0
rts
fp_get_d2:
- move.l (PT_D2+8,%sp),%d0
+ move.l (PT_OFF_D2+8,%sp),%d0
printf PREGISTER,"{d2->%08x}",1,%d0
rts
@@ -173,35 +173,35 @@
fp_put_d0:
printf PREGISTER,"{d0<-%08x}",1,%d0
- move.l %d0,(PT_D0+8,%sp)
+ move.l %d0,(PT_OFF_D0+8,%sp)
rts
fp_put_d1:
printf PREGISTER,"{d1<-%08x}",1,%d0
- move.l %d0,(PT_D1+8,%sp)
+ move.l %d0,(PT_OFF_D1+8,%sp)
rts
fp_put_d2:
printf PREGISTER,"{d2<-%08x}",1,%d0
- move.l %d0,(PT_D2+8,%sp)
+ move.l %d0,(PT_OFF_D2+8,%sp)
rts
fp_put_d3:
printf PREGISTER,"{d3<-%08x}",1,%d0
| move.l %d0,%d3
- move.l %d0,(PT_D3+8,%sp)
+ move.l %d0,(PT_OFF_D3+8,%sp)
rts
fp_put_d4:
printf PREGISTER,"{d4<-%08x}",1,%d0
| move.l %d0,%d4
- move.l %d0,(PT_D4+8,%sp)
+ move.l %d0,(PT_OFF_D4+8,%sp)
rts
fp_put_d5:
printf PREGISTER,"{d5<-%08x}",1,%d0
| move.l %d0,%d5
- move.l %d0,(PT_D5+8,%sp)
+ move.l %d0,(PT_OFF_D5+8,%sp)
rts
fp_put_d6:
@@ -225,17 +225,17 @@
.long fp_get_a6, fp_get_a7
fp_get_a0:
- move.l (PT_A0+8,%sp),%a0
+ move.l (PT_OFF_A0+8,%sp),%a0
printf PREGISTER,"{a0->%08x}",1,%a0
rts
fp_get_a1:
- move.l (PT_A1+8,%sp),%a0
+ move.l (PT_OFF_A1+8,%sp),%a0
printf PREGISTER,"{a1->%08x}",1,%a0
rts
fp_get_a2:
- move.l (PT_A2+8,%sp),%a0
+ move.l (PT_OFF_A2+8,%sp),%a0
printf PREGISTER,"{a2->%08x}",1,%a0
rts
@@ -276,17 +276,17 @@
fp_put_a0:
printf PREGISTER,"{a0<-%08x}",1,%a0
- move.l %a0,(PT_A0+8,%sp)
+ move.l %a0,(PT_OFF_A0+8,%sp)
rts
fp_put_a1:
printf PREGISTER,"{a1<-%08x}",1,%a0
- move.l %a0,(PT_A1+8,%sp)
+ move.l %a0,(PT_OFF_A1+8,%sp)
rts
fp_put_a2:
printf PREGISTER,"{a2<-%08x}",1,%a0
- move.l %a0,(PT_A2+8,%sp)
+ move.l %a0,(PT_OFF_A2+8,%sp)
rts
fp_put_a3:
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index c0b8782..0ae123e 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -349,6 +349,8 @@
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 330 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 2ecab61..cf50fa2 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -32,6 +32,8 @@
#include <linux/leds.h>
#include <linux/string.h>
#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
@@ -208,6 +210,12 @@
.width = 2,
};
+static struct fixed_phy_status fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = 100,
+ .duplex = 1,
+};
+
static struct plat_cpmac_data cpmac_low_data = {
.reset_bit = 17,
.power_bit = 20,
@@ -530,6 +538,9 @@
}
if (ar7_has_high_cpmac()) {
+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
+ if (res && res != -ENODEV)
+ return res;
cpmac_get_mac(1, cpmac_high_data.dev_addr);
res = platform_device_register(&cpmac_high);
if (res)
@@ -538,6 +549,10 @@
cpmac_low_data.phy_mask = 0xffffffff;
}
+ res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
+ if (res && res != -ENODEV)
+ return res;
+
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
if (res)
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 2abca17..ae05acc 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -42,6 +42,8 @@
#define SO_SNDTIMEO 0x1005 /* send timeout */
#define SO_RCVTIMEO 0x1006 /* receive timeout */
#define SO_ACCEPTCONN 0x1009
+#define SO_PROTOCOL 0x1028 /* protocol type */
+#define SO_DOMAIN 0x1029 /* domain/socket family */
/* linux-specific, might as well be the same as on i386 */
#define SO_NO_CHECK 11
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index f9df720..01cc163 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -115,6 +115,7 @@
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */
#define TIF_SECCOMP 4 /* secure computing */
+#define TIF_NOTIFY_RESUME 5 /* callback before returning to user */
#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
@@ -139,6 +140,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e855b11..1a6ae12 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -164,7 +164,7 @@
PTR sys_connect
PTR sys_accept
PTR sys_sendto
- PTR sys_recvfrom
+ PTR compat_sys_recvfrom
PTR compat_sys_sendmsg /* 6045 */
PTR compat_sys_recvmsg
PTR sys_shutdown
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 0c49f1a..cd31087 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -378,8 +378,8 @@
PTR sys_getsockname
PTR sys_getsockopt
PTR sys_listen
- PTR sys_recv /* 4175 */
- PTR sys_recvfrom
+ PTR compat_sys_recv /* 4175 */
+ PTR compat_sys_recvfrom
PTR compat_sys_recvmsg
PTR sys_send
PTR compat_sys_sendmsg
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 830c5ef..6254041 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -21,6 +21,7 @@
#include <linux/compiler.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
+#include <linux/tracehook.h>
#include <asm/abi.h>
#include <asm/asm.h>
@@ -700,4 +701,11 @@
/* deal with pending signal delivery */
if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index fb5daf4..4df75af 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -57,4 +57,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index feb2f2e..a21f43b 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -568,5 +568,7 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(__frame);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 885472b..960b1e5 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -24,6 +24,8 @@
#define SO_RCVTIMEO 0x1006
#define SO_ERROR 0x1007
#define SO_TYPE 0x1008
+#define SO_PROTOCOL 0x1028
+#define SO_DOMAIN 0x1029
#define SO_PEERNAME 0x2000
#define SO_NO_CHECK 0x400b
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 4ce0edf..ac775a7 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -59,6 +59,7 @@
#define TIF_MEMDIE 5
#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */
#define TIF_FREEZE 7 /* is freezing for suspend */
+#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
@@ -67,8 +68,9 @@
#define _TIF_32BIT (1 << TIF_32BIT)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | \
+#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
_TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
#endif /* __KERNEL__ */
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index e552e54..8c4712b 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -948,7 +948,7 @@
/* As above */
mfctl %cr30,%r1
LDREG TI_FLAGS(%r1),%r19
- ldi (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %r20
+ ldi (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NOTIFY_RESUME), %r20
and,COND(<>) %r19, %r20, %r0
b,n intr_restore /* skip past if we've nothing to do */
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index f825442..8eb3c63 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -25,6 +25,7 @@
#include <linux/stddef.h>
#include <linux/compat.h>
#include <linux/elf.h>
+#include <linux/tracehook.h>
#include <asm/ucontext.h>
#include <asm/rt_sigframe.h>
#include <asm/uaccess.h>
@@ -645,4 +646,11 @@
if (test_thread_flag(TIF_SIGPENDING) ||
test_thread_flag(TIF_RESTORE_SIGMASK))
do_signal(regs, in_syscall);
+
+ if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
}
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 528f0ff..8b58bf0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -532,7 +532,7 @@
/* Kill the user process later */
regs->iaoq[0] = 0 | 3;
regs->iaoq[1] = regs->iaoq[0] + 4;
- regs->iasq[0] = regs->iasq[0] = regs->sr[7];
+ regs->iasq[0] = regs->iasq[1] = regs->sr[7];
regs->gr[0] &= ~PSW_B;
return;
}
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index e28e65e..7de127e 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,13 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Fri May 15 10:37:00 2009
+# Linux kernel version: 2.6.31-rc7
+# Mon Aug 24 17:38:50 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S_64=y
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
@@ -20,6 +21,7 @@
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
@@ -31,6 +33,7 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -41,7 +44,6 @@
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
@@ -62,6 +64,7 @@
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -113,7 +116,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -126,7 +128,14 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -145,6 +154,11 @@
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -210,7 +224,7 @@
#
# Cell Broadband Engine options
#
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
@@ -255,6 +269,7 @@
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -285,9 +300,9 @@
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
@@ -399,6 +414,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -433,11 +449,14 @@
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
@@ -447,7 +466,6 @@
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
@@ -472,77 +490,7 @@
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
+# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -590,10 +538,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -626,7 +570,6 @@
# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -646,10 +589,11 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
-CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
# CONFIG_NETDEV_10000 is not set
#
@@ -669,8 +613,7 @@
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
@@ -682,7 +625,7 @@
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
@@ -693,10 +636,11 @@
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -771,8 +715,7 @@
#
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
@@ -782,6 +725,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -805,22 +753,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -898,6 +831,11 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PPC=y
CONFIG_SND_PS3=m
@@ -930,29 +868,34 @@
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -988,6 +931,8 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1115,6 +1060,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1141,11 +1090,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1205,7 +1155,6 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1222,6 +1171,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1359,7 +1309,6 @@
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1374,31 +1323,21 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index b44aaab..0c34371 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -424,6 +424,29 @@
#endif
}
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+ if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+ return 0;
+
+ if (!dev->dma_mask)
+ return 0;
+
+ return addr + size <= *dev->dma_mask;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr + get_dma_direct_offset(dev);
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr - get_dma_direct_offset(dev);
+}
+
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#ifdef CONFIG_NOT_COHERENT_CACHE
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index fddc3ed..c9c930e 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -34,7 +34,8 @@
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
/* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1UL << 31)
+#define KVM_NR_PAGE_SIZES 1
+#define KVM_PAGES_PER_HPAGE(x) (1UL<<31)
struct kvm;
struct kvm_run;
@@ -153,7 +154,6 @@
u32 pid;
u32 swap_pid;
- u32 pvr;
u32 ccr0;
u32 ccr1;
u32 dbcr0;
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index eb17da7..2a5da06 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -104,8 +104,8 @@
else
pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
-#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
- /* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+ /* Second case is 32-bit with 64-bit PTE. In this case, we
* can just store as long as we do the two halves in the right order
* with a barrier in between. This is possible because we take care,
* in the hash code, to pre-invalidate if the PTE was already hashed,
@@ -140,7 +140,7 @@
#else
/* Anything else just stores the PTE normally. That covers all 64-bit
- * cases, and 32-bit non-hash with 64-bit PTEs in UP mode
+ * cases, and 32-bit non-hash with 32-bit PTEs.
*/
*ptep = pte;
#endif
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 157c5ca..f388f0a 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -154,6 +154,7 @@
void qe_put_snum(u8 snum);
unsigned int qe_get_num_of_risc(void);
unsigned int qe_get_num_of_snums(void);
+int qe_alive_during_sleep(void);
/* we actually use cpm_muram implementation, define this for convenience */
#define qe_muram_init cpm_muram_init
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 1e5cfad..3ab8b3e 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -64,4 +64,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index c3b1931..198266c 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -54,7 +54,7 @@
* This returns the old value in the lock, so we succeeded
* in getting the lock if the return value is 0.
*/
-static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+static inline unsigned long arch_spin_trylock(raw_spinlock_t *lock)
{
unsigned long tmp, token;
@@ -76,7 +76,7 @@
static inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
CLEAR_IO_SYNC;
- return __spin_trylock(lock) == 0;
+ return arch_spin_trylock(lock) == 0;
}
/*
@@ -108,7 +108,7 @@
{
CLEAR_IO_SYNC;
while (1) {
- if (likely(__spin_trylock(lock) == 0))
+ if (likely(arch_spin_trylock(lock) == 0))
break;
do {
HMT_low();
@@ -126,7 +126,7 @@
CLEAR_IO_SYNC;
while (1) {
- if (likely(__spin_trylock(lock) == 0))
+ if (likely(arch_spin_trylock(lock) == 0))
break;
local_save_flags(flags_dis);
local_irq_restore(flags);
@@ -181,7 +181,7 @@
* This returns the old value in the lock + 1,
* so we got a read lock if the return value is > 0.
*/
-static inline long __read_trylock(raw_rwlock_t *rw)
+static inline long arch_read_trylock(raw_rwlock_t *rw)
{
long tmp;
@@ -205,7 +205,7 @@
* This returns the old value in the lock,
* so we got the write lock if the return value is 0.
*/
-static inline long __write_trylock(raw_rwlock_t *rw)
+static inline long arch_write_trylock(raw_rwlock_t *rw)
{
long tmp, token;
@@ -228,7 +228,7 @@
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
while (1) {
- if (likely(__read_trylock(rw) > 0))
+ if (likely(arch_read_trylock(rw) > 0))
break;
do {
HMT_low();
@@ -242,7 +242,7 @@
static inline void __raw_write_lock(raw_rwlock_t *rw)
{
while (1) {
- if (likely(__write_trylock(rw) == 0))
+ if (likely(arch_write_trylock(rw) == 0))
break;
do {
HMT_low();
@@ -255,12 +255,12 @@
static inline int __raw_read_trylock(raw_rwlock_t *rw)
{
- return __read_trylock(rw) > 0;
+ return arch_read_trylock(rw) > 0;
}
static inline int __raw_write_trylock(raw_rwlock_t *rw)
{
- return __write_trylock(rw) == 0;
+ return arch_write_trylock(rw) == 0;
}
static inline void __raw_read_unlock(raw_rwlock_t *rw)
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b73396b..9619285 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -97,7 +97,7 @@
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o
+obj-$(CONFIG_PPC_PERF_CTRS) += perf_counter.o perf_callchain.o
obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \
power5+-pmu.o power6-pmu.o power7-pmu.o
obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 561b646..197b156 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -67,6 +67,8 @@
DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id));
#ifdef CONFIG_PPC64
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+ DEFINE(SIGSEGV, SIGSEGV);
+ DEFINE(NMI_MASK, NMI_MASK);
#else
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 68ccf11..e8a57de 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,50 +24,12 @@
int swiotlb __read_mostly;
unsigned int ppc_swiotlb_enable;
-void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
-{
- unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
- void *pageaddr = page_address(pfn_to_page(pfn));
-
- if (pageaddr != NULL)
- return pageaddr + (addr % PAGE_SIZE);
- return NULL;
-}
-
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
- return paddr + get_dma_direct_offset(hwdev);
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-
-{
- return baddr - get_dma_direct_offset(hwdev);
-}
-
-/*
- * Determine if an address needs bounce buffering via swiotlb.
- * Going forward I expect the swiotlb code to generalize on using
- * a dma_ops->addr_needs_map, and this function will move from here to the
- * generic swiotlb code.
- */
-int
-swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
- size_t size)
-{
- struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
-
- BUG_ON(!dma_ops);
- return dma_ops->addr_needs_map(hwdev, addr, size);
-}
-
/*
* Determine if an address is reachable by a pci device, or if we must bounce.
*/
static int
swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
{
- u64 mask = dma_get_mask(hwdev);
dma_addr_t max;
struct pci_controller *hose;
struct pci_dev *pdev = to_pci_dev(hwdev);
@@ -79,16 +41,9 @@
if ((addr + size > max) | (addr < hose->dma_window_base_cur))
return 1;
- return !is_buffer_dma_capable(mask, addr, size);
+ return 0;
}
-static int
-swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
- return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
-}
-
-
/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
@@ -104,7 +59,6 @@
.dma_supported = swiotlb_dma_supported,
.map_page = swiotlb_map_page,
.unmap_page = swiotlb_unmap_page,
- .addr_needs_map = swiotlb_addr_needs_map,
.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eb89811..8ac85e0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -729,6 +729,11 @@
bne- do_ste_alloc /* If so handle it */
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ clrrdi r11,r1,THREAD_SHIFT
+ lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
+ andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
+ bne 77f /* then don't call hash_page now */
+
/*
* On iSeries, we soft-disable interrupts here, then
* hard-enable interrupts so that the hash_page code can spin on
@@ -833,6 +838,20 @@
bl .low_hash_fault
b .ret_from_except
+/*
+ * We come here as a result of a DSI at a point where we don't want
+ * to call hash_page, such as when we are accessing memory (possibly
+ * user memory) inside a PMU interrupt that occurred while interrupts
+ * were soft-disabled. We want to invoke the exception handler for
+ * the access, or panic if there isn't a handler.
+ */
+77: bl .save_nvgprs
+ mr r4,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r5,SIGSEGV
+ bl .bad_page_fault
+ b .ret_from_except
+
/* here we have a segment miss */
do_ste_alloc:
bl .ste_allocate /* try to insert stab entry */
diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c
new file mode 100644
index 0000000..f74b62c
--- /dev/null
+++ b/arch/powerpc/kernel/perf_callchain.c
@@ -0,0 +1,527 @@
+/*
+ * Performance counter callchain support - powerpc architecture code
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_counter.h>
+#include <linux/percpu.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/sigcontext.h>
+#include <asm/ucontext.h>
+#include <asm/vdso.h>
+#ifdef CONFIG_PPC64
+#include "ppc32.h"
+#endif
+
+/*
+ * Store another value in a callchain_entry.
+ */
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+ unsigned int nr = entry->nr;
+
+ if (nr < PERF_MAX_STACK_DEPTH) {
+ entry->ip[nr] = ip;
+ entry->nr = nr + 1;
+ }
+}
+
+/*
+ * Is sp valid as the address of the next kernel stack frame after prev_sp?
+ * The next frame may be in a different stack area but should not go
+ * back down in the same stack area.
+ */
+static int valid_next_sp(unsigned long sp, unsigned long prev_sp)
+{
+ if (sp & 0xf)
+ return 0; /* must be 16-byte aligned */
+ if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+ return 0;
+ if (sp >= prev_sp + STACK_FRAME_OVERHEAD)
+ return 1;
+ /*
+ * sp could decrease when we jump off an interrupt stack
+ * back to the regular process stack.
+ */
+ if ((sp & ~(THREAD_SIZE - 1)) != (prev_sp & ~(THREAD_SIZE - 1)))
+ return 1;
+ return 0;
+}
+
+static void perf_callchain_kernel(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long sp, next_sp;
+ unsigned long next_ip;
+ unsigned long lr;
+ long level = 0;
+ unsigned long *fp;
+
+ lr = regs->link;
+ sp = regs->gpr[1];
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+ callchain_store(entry, regs->nip);
+
+ if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+ return;
+
+ for (;;) {
+ fp = (unsigned long *) sp;
+ next_sp = fp[0];
+
+ if (next_sp == sp + STACK_INT_FRAME_SIZE &&
+ fp[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
+ /*
+ * This looks like an interrupt frame for an
+ * interrupt that occurred in the kernel
+ */
+ regs = (struct pt_regs *)(sp + STACK_FRAME_OVERHEAD);
+ next_ip = regs->nip;
+ lr = regs->link;
+ level = 0;
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+
+ } else {
+ if (level == 0)
+ next_ip = lr;
+ else
+ next_ip = fp[STACK_FRAME_LR_SAVE];
+
+ /*
+ * We can't tell which of the first two addresses
+ * we get are valid, but we can filter out the
+ * obviously bogus ones here. We replace them
+ * with 0 rather than removing them entirely so
+ * that userspace can tell which is which.
+ */
+ if ((level == 1 && next_ip == lr) ||
+ (level <= 1 && !kernel_text_address(next_ip)))
+ next_ip = 0;
+
+ ++level;
+ }
+
+ callchain_store(entry, next_ip);
+ if (!valid_next_sp(next_sp, sp))
+ return;
+ sp = next_sp;
+ }
+}
+
+#ifdef CONFIG_PPC64
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define is_huge_psize(pagesize) (HPAGE_SHIFT && mmu_huge_psizes[pagesize])
+#else
+#define is_huge_psize(pagesize) 0
+#endif
+
+/*
+ * On 64-bit we don't want to invoke hash_page on user addresses from
+ * interrupt context, so if the access faults, we read the page tables
+ * to find which page (if any) is mapped and access it directly.
+ */
+static int read_user_stack_slow(void __user *ptr, void *ret, int nb)
+{
+ pgd_t *pgdir;
+ pte_t *ptep, pte;
+ int pagesize;
+ unsigned long addr = (unsigned long) ptr;
+ unsigned long offset;
+ unsigned long pfn;
+ void *kaddr;
+
+ pgdir = current->mm->pgd;
+ if (!pgdir)
+ return -EFAULT;
+
+ pagesize = get_slice_psize(current->mm, addr);
+
+ /* align address to page boundary */
+ offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1);
+ addr -= offset;
+
+ if (is_huge_psize(pagesize))
+ ptep = huge_pte_offset(current->mm, addr);
+ else
+ ptep = find_linux_pte(pgdir, addr);
+
+ if (ptep == NULL)
+ return -EFAULT;
+ pte = *ptep;
+ if (!pte_present(pte) || !(pte_val(pte) & _PAGE_USER))
+ return -EFAULT;
+ pfn = pte_pfn(pte);
+ if (!page_is_ram(pfn))
+ return -EFAULT;
+
+ /* no highmem to worry about here */
+ kaddr = pfn_to_kaddr(pfn);
+ memcpy(ret, kaddr + offset, nb);
+ return 0;
+}
+
+static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
+{
+ if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) ||
+ ((unsigned long)ptr & 7))
+ return -EFAULT;
+
+ if (!__get_user_inatomic(*ret, ptr))
+ return 0;
+
+ return read_user_stack_slow(ptr, ret, 8);
+}
+
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+ if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+ ((unsigned long)ptr & 3))
+ return -EFAULT;
+
+ if (!__get_user_inatomic(*ret, ptr))
+ return 0;
+
+ return read_user_stack_slow(ptr, ret, 4);
+}
+
+static inline int valid_user_sp(unsigned long sp, int is_64)
+{
+ if (!sp || (sp & 7) || sp > (is_64 ? TASK_SIZE : 0x100000000UL) - 32)
+ return 0;
+ return 1;
+}
+
+/*
+ * 64-bit user processes use the same stack frame for RT and non-RT signals.
+ */
+struct signal_frame_64 {
+ char dummy[__SIGNAL_FRAMESIZE];
+ struct ucontext uc;
+ unsigned long unused[2];
+ unsigned int tramp[6];
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ char abigap[288];
+};
+
+static int is_sigreturn_64_address(unsigned long nip, unsigned long fp)
+{
+ if (nip == fp + offsetof(struct signal_frame_64, tramp))
+ return 1;
+ if (vdso64_rt_sigtramp && current->mm->context.vdso_base &&
+ nip == current->mm->context.vdso_base + vdso64_rt_sigtramp)
+ return 1;
+ return 0;
+}
+
+/*
+ * Do some sanity checking on the signal frame pointed to by sp.
+ * We check the pinfo and puc pointers in the frame.
+ */
+static int sane_signal_64_frame(unsigned long sp)
+{
+ struct signal_frame_64 __user *sf;
+ unsigned long pinfo, puc;
+
+ sf = (struct signal_frame_64 __user *) sp;
+ if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) ||
+ read_user_stack_64((unsigned long __user *) &sf->puc, &puc))
+ return 0;
+ return pinfo == (unsigned long) &sf->info &&
+ puc == (unsigned long) &sf->uc;
+}
+
+static void perf_callchain_user_64(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned long sp, next_sp;
+ unsigned long next_ip;
+ unsigned long lr;
+ long level = 0;
+ struct signal_frame_64 __user *sigframe;
+ unsigned long __user *fp, *uregs;
+
+ next_ip = regs->nip;
+ lr = regs->link;
+ sp = regs->gpr[1];
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, next_ip);
+
+ for (;;) {
+ fp = (unsigned long __user *) sp;
+ if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp))
+ return;
+ if (level > 0 && read_user_stack_64(&fp[2], &next_ip))
+ return;
+
+ /*
+ * Note: the next_sp - sp >= signal frame size check
+ * is true when next_sp < sp, which can happen when
+ * transitioning from an alternate signal stack to the
+ * normal stack.
+ */
+ if (next_sp - sp >= sizeof(struct signal_frame_64) &&
+ (is_sigreturn_64_address(next_ip, sp) ||
+ (level <= 1 && is_sigreturn_64_address(lr, sp))) &&
+ sane_signal_64_frame(sp)) {
+ /*
+ * This looks like an signal frame
+ */
+ sigframe = (struct signal_frame_64 __user *) sp;
+ uregs = sigframe->uc.uc_mcontext.gp_regs;
+ if (read_user_stack_64(&uregs[PT_NIP], &next_ip) ||
+ read_user_stack_64(&uregs[PT_LNK], &lr) ||
+ read_user_stack_64(&uregs[PT_R1], &sp))
+ return;
+ level = 0;
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, next_ip);
+ continue;
+ }
+
+ if (level == 0)
+ next_ip = lr;
+ callchain_store(entry, next_ip);
+ ++level;
+ sp = next_sp;
+ }
+}
+
+static inline int current_is_64bit(void)
+{
+ /*
+ * We can't use test_thread_flag() here because we may be on an
+ * interrupt stack, and the thread flags don't get copied over
+ * from the thread_info on the main stack to the interrupt stack.
+ */
+ return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT);
+}
+
+#else /* CONFIG_PPC64 */
+/*
+ * On 32-bit we just access the address and let hash_page create a
+ * HPTE if necessary, so there is no need to fall back to reading
+ * the page tables. Since this is called at interrupt level,
+ * do_page_fault() won't treat a DSI as a page fault.
+ */
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+ if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+ ((unsigned long)ptr & 3))
+ return -EFAULT;
+
+ return __get_user_inatomic(*ret, ptr);
+}
+
+static inline void perf_callchain_user_64(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+}
+
+static inline int current_is_64bit(void)
+{
+ return 0;
+}
+
+static inline int valid_user_sp(unsigned long sp, int is_64)
+{
+ if (!sp || (sp & 7) || sp > TASK_SIZE - 32)
+ return 0;
+ return 1;
+}
+
+#define __SIGNAL_FRAMESIZE32 __SIGNAL_FRAMESIZE
+#define sigcontext32 sigcontext
+#define mcontext32 mcontext
+#define ucontext32 ucontext
+#define compat_siginfo_t struct siginfo
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * Layout for non-RT signal frames
+ */
+struct signal_frame_32 {
+ char dummy[__SIGNAL_FRAMESIZE32];
+ struct sigcontext32 sctx;
+ struct mcontext32 mctx;
+ int abigap[56];
+};
+
+/*
+ * Layout for RT signal frames
+ */
+struct rt_signal_frame_32 {
+ char dummy[__SIGNAL_FRAMESIZE32 + 16];
+ compat_siginfo_t info;
+ struct ucontext32 uc;
+ int abigap[56];
+};
+
+static int is_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+ if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad))
+ return 1;
+ if (vdso32_sigtramp && current->mm->context.vdso_base &&
+ nip == current->mm->context.vdso_base + vdso32_sigtramp)
+ return 1;
+ return 0;
+}
+
+static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+ if (nip == fp + offsetof(struct rt_signal_frame_32,
+ uc.uc_mcontext.mc_pad))
+ return 1;
+ if (vdso32_rt_sigtramp && current->mm->context.vdso_base &&
+ nip == current->mm->context.vdso_base + vdso32_rt_sigtramp)
+ return 1;
+ return 0;
+}
+
+static int sane_signal_32_frame(unsigned int sp)
+{
+ struct signal_frame_32 __user *sf;
+ unsigned int regs;
+
+ sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+ if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, ®s))
+ return 0;
+ return regs == (unsigned long) &sf->mctx;
+}
+
+static int sane_rt_signal_32_frame(unsigned int sp)
+{
+ struct rt_signal_frame_32 __user *sf;
+ unsigned int regs;
+
+ sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+ if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, ®s))
+ return 0;
+ return regs == (unsigned long) &sf->uc.uc_mcontext;
+}
+
+static unsigned int __user *signal_frame_32_regs(unsigned int sp,
+ unsigned int next_sp, unsigned int next_ip)
+{
+ struct mcontext32 __user *mctx = NULL;
+ struct signal_frame_32 __user *sf;
+ struct rt_signal_frame_32 __user *rt_sf;
+
+ /*
+ * Note: the next_sp - sp >= signal frame size check
+ * is true when next_sp < sp, for example, when
+ * transitioning from an alternate signal stack to the
+ * normal stack.
+ */
+ if (next_sp - sp >= sizeof(struct signal_frame_32) &&
+ is_sigreturn_32_address(next_ip, sp) &&
+ sane_signal_32_frame(sp)) {
+ sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+ mctx = &sf->mctx;
+ }
+
+ if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) &&
+ is_rt_sigreturn_32_address(next_ip, sp) &&
+ sane_rt_signal_32_frame(sp)) {
+ rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+ mctx = &rt_sf->uc.uc_mcontext;
+ }
+
+ if (!mctx)
+ return NULL;
+ return mctx->mc_gregs;
+}
+
+static void perf_callchain_user_32(struct pt_regs *regs,
+ struct perf_callchain_entry *entry)
+{
+ unsigned int sp, next_sp;
+ unsigned int next_ip;
+ unsigned int lr;
+ long level = 0;
+ unsigned int __user *fp, *uregs;
+
+ next_ip = regs->nip;
+ lr = regs->link;
+ sp = regs->gpr[1];
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, next_ip);
+
+ while (entry->nr < PERF_MAX_STACK_DEPTH) {
+ fp = (unsigned int __user *) (unsigned long) sp;
+ if (!valid_user_sp(sp, 0) || read_user_stack_32(fp, &next_sp))
+ return;
+ if (level > 0 && read_user_stack_32(&fp[1], &next_ip))
+ return;
+
+ uregs = signal_frame_32_regs(sp, next_sp, next_ip);
+ if (!uregs && level <= 1)
+ uregs = signal_frame_32_regs(sp, next_sp, lr);
+ if (uregs) {
+ /*
+ * This looks like an signal frame, so restart
+ * the stack trace with the values in it.
+ */
+ if (read_user_stack_32(&uregs[PT_NIP], &next_ip) ||
+ read_user_stack_32(&uregs[PT_LNK], &lr) ||
+ read_user_stack_32(&uregs[PT_R1], &sp))
+ return;
+ level = 0;
+ callchain_store(entry, PERF_CONTEXT_USER);
+ callchain_store(entry, next_ip);
+ continue;
+ }
+
+ if (level == 0)
+ next_ip = lr;
+ callchain_store(entry, next_ip);
+ ++level;
+ sp = next_sp;
+ }
+}
+
+/*
+ * Since we can't get PMU interrupts inside a PMU interrupt handler,
+ * we don't need separate irq and nmi entries here.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+ struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+ entry->nr = 0;
+
+ if (current->pid == 0) /* idle task? */
+ return entry;
+
+ if (!user_mode(regs)) {
+ perf_callchain_kernel(regs, entry);
+ if (current->mm)
+ regs = task_pt_regs(current);
+ else
+ regs = NULL;
+ }
+
+ if (regs) {
+ if (current_is_64bit())
+ perf_callchain_user_64(regs, entry);
+ else
+ perf_callchain_user_32(regs, entry);
+ }
+
+ return entry;
+}
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 388cf57..018d094 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -317,7 +317,7 @@
*/
static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x400f0, 0xc880 },
+ [C(OP_READ)] = { 0xc880, 0x400f0 },
[C(OP_WRITE)] = { 0, 0x300f0 },
[C(OP_PREFETCH)] = { 0xd8b8, 0 },
},
@@ -327,8 +327,8 @@
[C(OP_PREFETCH)] = { 0x408a, 0 },
},
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x6080, 0x6084 },
- [C(OP_WRITE)] = { 0x6082, 0x6086 },
+ [C(OP_READ)] = { 0x16080, 0x26080 },
+ [C(OP_WRITE)] = { 0x16082, 0x26082 },
[C(OP_PREFETCH)] = { 0, 0 },
},
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index 0cef809..f4d1b55 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -138,7 +138,7 @@
kmem_cache_free(kvm_vcpu_cache, vcpu_44x);
}
-static int kvmppc_44x_init(void)
+static int __init kvmppc_44x_init(void)
{
int r;
@@ -149,7 +149,7 @@
return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), THIS_MODULE);
}
-static void kvmppc_44x_exit(void)
+static void __exit kvmppc_44x_exit(void)
{
kvmppc_booke_exit();
}
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 4a16f47..ff3cb63 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -30,6 +30,7 @@
#include "timing.h"
#include "44x_tlb.h"
+#include "trace.h"
#ifndef PPC44x_TLBE_SIZE
#define PPC44x_TLBE_SIZE PPC44x_TLB_4K
@@ -263,7 +264,7 @@
/* XXX set tlb_44x_index to stlb_index? */
- KVMTRACE_1D(STLB_INVAL, &vcpu_44x->vcpu, stlb_index, handler);
+ trace_kvm_stlb_inval(stlb_index);
}
void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
@@ -365,8 +366,8 @@
/* Insert shadow mapping into hardware TLB. */
kvmppc_44x_tlbe_set_modified(vcpu_44x, victim);
kvmppc_44x_tlbwe(victim, &stlbe);
- KVMTRACE_5D(STLB_WRITE, vcpu, victim, stlbe.tid, stlbe.word0, stlbe.word1,
- stlbe.word2, handler);
+ trace_kvm_stlb_write(victim, stlbe.tid, stlbe.word0, stlbe.word1,
+ stlbe.word2);
}
/* For a particular guest TLB entry, invalidate the corresponding host TLB
@@ -485,8 +486,8 @@
kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index);
}
- KVMTRACE_5D(GTLB_WRITE, vcpu, gtlb_index, tlbe->tid, tlbe->word0,
- tlbe->word1, tlbe->word2, handler);
+ trace_kvm_gtlb_write(gtlb_index, tlbe->tid, tlbe->word0, tlbe->word1,
+ tlbe->word2);
kvmppc_set_exit_type(vcpu, EMULATED_TLBWE_EXITS);
return EMULATE_DONE;
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 5a152a5..c299268 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -2,8 +2,7 @@
# KVM configuration
#
-config HAVE_KVM_IRQCHIP
- bool
+source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
@@ -59,17 +58,6 @@
If unsure, say N.
-config KVM_TRACE
- bool "KVM trace support"
- depends on KVM && MARKERS && SYSFS
- select RELAY
- select DEBUG_FS
- default n
- ---help---
- This option allows reading a trace of kvm-related events through
- relayfs. Note the ABI is not considered stable and will be
- modified in future updates.
-
source drivers/virtio/Kconfig
endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 459c7ee..37655fe 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -8,7 +8,9 @@
common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
-common-objs-$(CONFIG_KVM_TRACE) += $(addprefix ../../../virt/kvm/, kvm_trace.o)
+CFLAGS_44x_tlb.o := -I.
+CFLAGS_e500_tlb.o := -I.
+CFLAGS_emulate.o := -I.
kvm-objs := $(common-objs-y) powerpc.o emulate.o
obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 642e420..e7bf4d0 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -520,7 +520,7 @@
return kvmppc_core_vcpu_translate(vcpu, tr);
}
-int kvmppc_booke_init(void)
+int __init kvmppc_booke_init(void)
{
unsigned long ivor[16];
unsigned long max_ivor = 0;
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index d8067fd..64949ee 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -60,9 +60,6 @@
kvmppc_e500_tlb_setup(vcpu_e500);
- /* Use the same core vertion as host's */
- vcpu->arch.pvr = mfspr(SPRN_PVR);
-
return 0;
}
@@ -132,7 +129,7 @@
kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
}
-static int kvmppc_e500_init(void)
+static int __init kvmppc_e500_init(void)
{
int r, i;
unsigned long ivor[3];
@@ -160,7 +157,7 @@
return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
}
-static void kvmppc_e500_exit(void)
+static void __init kvmppc_e500_exit(void)
{
kvmppc_booke_exit();
}
diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index 3f76041..be95b8d 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -180,6 +180,9 @@
case SPRN_MMUCSR0:
vcpu->arch.gpr[rt] = 0; break;
+ case SPRN_MMUCFG:
+ vcpu->arch.gpr[rt] = mfspr(SPRN_MMUCFG); break;
+
/* extra exceptions */
case SPRN_IVOR32:
vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL];
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index 0e773fc..fb1e1dc 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -22,6 +22,7 @@
#include "../mm/mmu_decl.h"
#include "e500_tlb.h"
+#include "trace.h"
#define to_htlb1_esel(esel) (tlb1_entry_num - (esel) - 1)
@@ -224,9 +225,8 @@
kvmppc_e500_shadow_release(vcpu_e500, tlbsel, esel);
stlbe->mas1 = 0;
- KVMTRACE_5D(STLB_INVAL, &vcpu_e500->vcpu, index_of(tlbsel, esel),
- stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
- handler);
+ trace_kvm_stlb_inval(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2,
+ stlbe->mas3, stlbe->mas7);
}
static void kvmppc_e500_tlb1_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
@@ -269,7 +269,7 @@
tlbsel = (vcpu_e500->mas4 >> 28) & 0x1;
victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
pidsel = (vcpu_e500->mas4 >> 16) & 0xf;
- tsized = (vcpu_e500->mas4 >> 8) & 0xf;
+ tsized = (vcpu_e500->mas4 >> 7) & 0x1f;
vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(victim)
| MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
@@ -309,7 +309,7 @@
vcpu_e500->shadow_pages[tlbsel][esel] = new_page;
/* Force TS=1 IPROT=0 TSIZE=4KB for all guest mappings. */
- stlbe->mas1 = MAS1_TSIZE(BOOKE_PAGESZ_4K)
+ stlbe->mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K)
| MAS1_TID(get_tlb_tid(gtlbe)) | MAS1_TS | MAS1_VALID;
stlbe->mas2 = (gvaddr & MAS2_EPN)
| e500_shadow_mas2_attrib(gtlbe->mas2,
@@ -319,9 +319,8 @@
vcpu_e500->vcpu.arch.msr & MSR_PR);
stlbe->mas7 = (hpaddr >> 32) & MAS7_RPN;
- KVMTRACE_5D(STLB_WRITE, &vcpu_e500->vcpu, index_of(tlbsel, esel),
- stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
- handler);
+ trace_kvm_stlb_write(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2,
+ stlbe->mas3, stlbe->mas7);
}
/* XXX only map the one-one case, for now use TLB0 */
@@ -535,9 +534,8 @@
gtlbe->mas3 = vcpu_e500->mas3;
gtlbe->mas7 = vcpu_e500->mas7;
- KVMTRACE_5D(GTLB_WRITE, vcpu, vcpu_e500->mas0,
- gtlbe->mas1, gtlbe->mas2, gtlbe->mas3, gtlbe->mas7,
- handler);
+ trace_kvm_gtlb_write(vcpu_e500->mas0, gtlbe->mas1, gtlbe->mas2,
+ gtlbe->mas3, gtlbe->mas7);
/* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */
if (tlbe_is_host_safe(vcpu, gtlbe)) {
@@ -545,7 +543,7 @@
case 0:
/* TLB0 */
gtlbe->mas1 &= ~MAS1_TSIZE(~0);
- gtlbe->mas1 |= MAS1_TSIZE(BOOKE_PAGESZ_4K);
+ gtlbe->mas1 |= MAS1_TSIZE(BOOK3E_PAGESZ_4K);
stlbsel = 0;
sesel = kvmppc_e500_stlbe_map(vcpu_e500, 0, esel);
@@ -679,14 +677,14 @@
/* Insert large initial mapping for guest. */
tlbe = &vcpu_e500->guest_tlb[1][0];
- tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_256M);
+ tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_256M);
tlbe->mas2 = 0;
tlbe->mas3 = E500_TLB_SUPER_PERM_MASK;
tlbe->mas7 = 0;
/* 4K map for serial output. Used by kernel wrapper. */
tlbe = &vcpu_e500->guest_tlb[1][1];
- tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+ tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_4K);
tlbe->mas2 = (0xe0004500 & 0xFFFFF000) | MAS2_I | MAS2_G;
tlbe->mas3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK;
tlbe->mas7 = 0;
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
index 45b064b..d28e301 100644
--- a/arch/powerpc/kvm/e500_tlb.h
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -16,7 +16,7 @@
#define __KVM_E500_TLB_H__
#include <linux/kvm_host.h>
-#include <asm/mmu-fsl-booke.h>
+#include <asm/mmu-book3e.h>
#include <asm/tlb.h>
#include <asm/kvm_e500.h>
@@ -59,7 +59,7 @@
/* TLB helper functions */
static inline unsigned int get_tlb_size(const struct tlbe *tlbe)
{
- return (tlbe->mas1 >> 8) & 0xf;
+ return (tlbe->mas1 >> 7) & 0x1f;
}
static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe)
@@ -70,7 +70,7 @@
static inline u64 get_tlb_bytes(const struct tlbe *tlbe)
{
unsigned int pgsize = get_tlb_size(tlbe);
- return 1ULL << 10 << (pgsize << 1);
+ return 1ULL << 10 << pgsize;
}
static inline gva_t get_tlb_end(const struct tlbe *tlbe)
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index a561d6e..7737146 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -29,6 +29,7 @@
#include <asm/kvm_ppc.h>
#include <asm/disassemble.h>
#include "timing.h"
+#include "trace.h"
#define OP_TRAP 3
@@ -187,7 +188,9 @@
case SPRN_SRR1:
vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
case SPRN_PVR:
- vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
+ vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
+ case SPRN_PIR:
+ vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break;
/* Note: mftb and TBRL/TBWL are user-accessible, so
* the guest can always access the real TB anyways.
@@ -417,7 +420,7 @@
}
}
- KVMTRACE_3D(PPC_INSTR, vcpu, inst, (int)vcpu->arch.pc, emulated, entryexit);
+ trace_kvm_ppc_instr(inst, vcpu->arch.pc, emulated);
if (advance)
vcpu->arch.pc += 4; /* Advance past emulated instruction. */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2cf915e..2a4551f 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -31,25 +31,17 @@
#include "timing.h"
#include "../mm/mmu_decl.h"
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
{
return gfn;
}
-int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
-{
- return !!(v->arch.pending_exceptions);
-}
-
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
- /* do real check here */
- return 1;
-}
-
int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
{
- return !(v->arch.msr & MSR_WE);
+ return !(v->arch.msr & MSR_WE) || !!(v->arch.pending_exceptions);
}
@@ -122,13 +114,17 @@
static void kvmppc_free_vcpus(struct kvm *kvm)
{
unsigned int i;
+ struct kvm_vcpu *vcpu;
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- if (kvm->vcpus[i]) {
- kvm_arch_vcpu_free(kvm->vcpus[i]);
- kvm->vcpus[i] = NULL;
- }
- }
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ kvm_arch_vcpu_free(vcpu);
+
+ mutex_lock(&kvm->lock);
+ for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+ kvm->vcpus[i] = NULL;
+
+ atomic_set(&kvm->online_vcpus, 0);
+ mutex_unlock(&kvm->lock);
}
void kvm_arch_sync_events(struct kvm *kvm)
diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h
new file mode 100644
index 0000000..67f219d
--- /dev/null
+++ b/arch/powerpc/kvm/trace.h
@@ -0,0 +1,104 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Tracepoint for guest mode entry.
+ */
+TRACE_EVENT(kvm_ppc_instr,
+ TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate),
+ TP_ARGS(inst, pc, emulate),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, inst )
+ __field( unsigned long, pc )
+ __field( unsigned int, emulate )
+ ),
+
+ TP_fast_assign(
+ __entry->inst = inst;
+ __entry->pc = pc;
+ __entry->emulate = emulate;
+ ),
+
+ TP_printk("inst %u pc 0x%lx emulate %u\n",
+ __entry->inst, __entry->pc, __entry->emulate)
+);
+
+TRACE_EVENT(kvm_stlb_inval,
+ TP_PROTO(unsigned int stlb_index),
+ TP_ARGS(stlb_index),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, stlb_index )
+ ),
+
+ TP_fast_assign(
+ __entry->stlb_index = stlb_index;
+ ),
+
+ TP_printk("stlb_index %u", __entry->stlb_index)
+);
+
+TRACE_EVENT(kvm_stlb_write,
+ TP_PROTO(unsigned int victim, unsigned int tid, unsigned int word0,
+ unsigned int word1, unsigned int word2),
+ TP_ARGS(victim, tid, word0, word1, word2),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, victim )
+ __field( unsigned int, tid )
+ __field( unsigned int, word0 )
+ __field( unsigned int, word1 )
+ __field( unsigned int, word2 )
+ ),
+
+ TP_fast_assign(
+ __entry->victim = victim;
+ __entry->tid = tid;
+ __entry->word0 = word0;
+ __entry->word1 = word1;
+ __entry->word2 = word2;
+ ),
+
+ TP_printk("victim %u tid %u w0 %u w1 %u w2 %u",
+ __entry->victim, __entry->tid, __entry->word0,
+ __entry->word1, __entry->word2)
+);
+
+TRACE_EVENT(kvm_gtlb_write,
+ TP_PROTO(unsigned int gtlb_index, unsigned int tid, unsigned int word0,
+ unsigned int word1, unsigned int word2),
+ TP_ARGS(gtlb_index, tid, word0, word1, word2),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, gtlb_index )
+ __field( unsigned int, tid )
+ __field( unsigned int, word0 )
+ __field( unsigned int, word1 )
+ __field( unsigned int, word2 )
+ ),
+
+ TP_fast_assign(
+ __entry->gtlb_index = gtlb_index;
+ __entry->tid = tid;
+ __entry->word0 = word0;
+ __entry->word1 = word1;
+ __entry->word2 = word2;
+ ),
+
+ TP_printk("gtlb_index %u tid %u w0 %u w1 %u w2 %u",
+ __entry->gtlb_index, __entry->tid, __entry->word0,
+ __entry->word1, __entry->word2)
+);
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 5b7038f..a685652 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -92,15 +92,13 @@
: "memory" );
}
-void slb_flush_and_rebolt(void)
+static void __slb_flush_and_rebolt(void)
{
/* If you change this make sure you change SLB_NUM_BOLTED
* appropriately too. */
unsigned long linear_llp, vmalloc_llp, lflags, vflags;
unsigned long ksp_esid_data, ksp_vsid_data;
- WARN_ON(!irqs_disabled());
-
linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
lflags = SLB_VSID_KERNEL | linear_llp;
@@ -117,12 +115,6 @@
ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
}
- /*
- * We can't take a PMU exception in the following code, so hard
- * disable interrupts.
- */
- hard_irq_disable();
-
/* We need to do this all in asm, so we're sure we don't touch
* the stack between the slbia and rebolting it. */
asm volatile("isync\n"
@@ -139,6 +131,21 @@
: "memory");
}
+void slb_flush_and_rebolt(void)
+{
+
+ WARN_ON(!irqs_disabled());
+
+ /*
+ * We can't take a PMU exception in the following code, so hard
+ * disable interrupts.
+ */
+ hard_irq_disable();
+
+ __slb_flush_and_rebolt();
+ get_paca()->slb_cache_ptr = 0;
+}
+
void slb_vmalloc_update(void)
{
unsigned long vflags;
@@ -180,12 +187,20 @@
/* Flush all user entries from the segment table of the current processor. */
void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
{
- unsigned long offset = get_paca()->slb_cache_ptr;
+ unsigned long offset;
unsigned long slbie_data = 0;
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
unsigned long unmapped_base;
+ /*
+ * We need interrupts hard-disabled here, not just soft-disabled,
+ * so that a PMU interrupt can't occur, which might try to access
+ * user memory (to get a stack trace) and possible cause an SLB miss
+ * which would update the slb_cache/slb_cache_ptr fields in the PACA.
+ */
+ hard_irq_disable();
+ offset = get_paca()->slb_cache_ptr;
if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
offset <= SLB_CACHE_ENTRIES) {
int i;
@@ -200,7 +215,7 @@
}
asm volatile("isync" : : : "memory");
} else {
- slb_flush_and_rebolt();
+ __slb_flush_and_rebolt();
}
/* Workaround POWER5 < DD2.1 issue */
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 98cd1dc..ab5fb48 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -164,7 +164,7 @@
{
struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr;
struct stab_entry *ste;
- unsigned long offset = __get_cpu_var(stab_cache_ptr);
+ unsigned long offset;
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
unsigned long unmapped_base;
@@ -172,6 +172,15 @@
/* Force previous translations to complete. DRENG */
asm volatile("isync" : : : "memory");
+ /*
+ * We need interrupts hard-disabled here, not just soft-disabled,
+ * so that a PMU interrupt can't occur, which might try to access
+ * user memory (to get a stack trace) and possible cause an STAB miss
+ * which would update the stab_cache/stab_cache_ptr per-cpu variables.
+ */
+ hard_irq_disable();
+
+ offset = __get_cpu_var(stab_cache_ptr);
if (offset <= NR_STAB_CACHE_ENTRIES) {
int i;
diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c
index b178a1e..40b5cb4 100644
--- a/arch/powerpc/platforms/ps3/time.c
+++ b/arch/powerpc/platforms/ps3/time.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <asm/firmware.h>
#include <asm/rtc.h>
#include <asm/lv1call.h>
#include <asm/ps3.h>
@@ -84,6 +85,9 @@
{
struct platform_device *pdev;
+ if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+ return -ENODEV;
+
pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 237e365..464271b 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -65,6 +65,19 @@
static phys_addr_t qebase = -1;
+int qe_alive_during_sleep(void)
+{
+ static int ret = -1;
+
+ if (ret != -1)
+ return ret;
+
+ ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
+
+ return ret;
+}
+EXPORT_SYMBOL(qe_alive_during_sleep);
+
phys_addr_t get_qe_base(void)
{
struct device_node *qe;
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 3ee1fd3..40edad5 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -234,7 +234,6 @@
generic_handle_irq(cascade_irq);
/* Let xilinx_intc end the interrupt */
- desc->chip->ack(irq);
desc->chip->unmask(irq);
}
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ae5d72..1c866ef 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -84,7 +84,7 @@
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FTRACE_MCOUNT_RECORD
- select HAVE_FTRACE_SYSCALLS
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_DEFAULT_NO_SPIN_MUTEXES
@@ -95,7 +95,6 @@
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
select HAVE_PERF_COUNTERS
- select GENERIC_ATOMIC64 if !64BIT
config SCHED_OMIT_FRAME_POINTER
bool
@@ -481,13 +480,6 @@
Select this option to enable the special message interface to
the cooperative memory management.
-config PAGE_STATES
- bool "Unused page notification"
- help
- This enables the notification of unused pages to the
- hypervisor. The ESSA instruction is used to do the states
- changes between a page that has content and the unused state.
-
config APPLDATA_BASE
bool "Linux - VM Monitor Stream, base infrastructure"
depends on PROC_FS
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 0ff387c..fc8fb20 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -88,8 +88,7 @@
head-y := arch/s390/kernel/head.o arch/s390/kernel/init_task.o
core-y += arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
- arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
- arch/s390/power/
+ arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
libs-y += arch/s390/lib/
drivers-y += drivers/s390/
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 4aba83b..2bc479a 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -250,8 +250,9 @@
const u8 *temp_key = key;
u32 *flags = &tfm->crt_flags;
- if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE))) {
- *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+ if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE)) &&
+ (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
return -EINVAL;
}
for (i = 0; i < 2; i++, temp_key += DES_KEY_SIZE) {
@@ -411,9 +412,9 @@
if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
- DES_KEY_SIZE))) {
-
- *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+ DES_KEY_SIZE)) &&
+ (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+ *flags |= CRYPTO_TFM_RES_WEAK_KEY;
return -EINVAL;
}
for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index e85ba34..f6de782 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -46,12 +46,38 @@
return 0;
}
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *octx = out;
+
+ octx->count = sctx->count;
+ memcpy(octx->state, sctx->state, sizeof(octx->state));
+ memcpy(octx->buffer, sctx->buf, sizeof(octx->buffer));
+ return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ const struct sha1_state *ictx = in;
+
+ sctx->count = ictx->count;
+ memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+ memcpy(sctx->buf, ictx->buffer, sizeof(ictx->buffer));
+ sctx->func = KIMD_SHA_1;
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = SHA1_DIGEST_SIZE,
.init = sha1_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha1_export,
+ .import = sha1_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha1_state),
.base = {
.cra_name = "sha1",
.cra_driver_name= "sha1-s390",
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index f9fefc5..61a7db3 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -42,12 +42,38 @@
return 0;
}
+static int sha256_export(struct shash_desc *desc, void *out)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *octx = out;
+
+ octx->count = sctx->count;
+ memcpy(octx->state, sctx->state, sizeof(octx->state));
+ memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+ return 0;
+}
+
+static int sha256_import(struct shash_desc *desc, const void *in)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ const struct sha256_state *ictx = in;
+
+ sctx->count = ictx->count;
+ memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+ memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+ sctx->func = KIMD_SHA_256;
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = SHA256_DIGEST_SIZE,
.init = sha256_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha256_export,
+ .import = sha256_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha256",
.cra_driver_name= "sha256-s390",
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index 83192bf..4bf73d0 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -13,7 +13,10 @@
*
*/
#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include "sha.h"
@@ -37,12 +40,42 @@
return 0;
}
+static int sha512_export(struct shash_desc *desc, void *out)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *octx = out;
+
+ octx->count[0] = sctx->count;
+ octx->count[1] = 0;
+ memcpy(octx->state, sctx->state, sizeof(octx->state));
+ memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+ return 0;
+}
+
+static int sha512_import(struct shash_desc *desc, const void *in)
+{
+ struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+ const struct sha512_state *ictx = in;
+
+ if (unlikely(ictx->count[1]))
+ return -ERANGE;
+ sctx->count = ictx->count[0];
+
+ memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+ memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+ sctx->func = KIMD_SHA_512;
+ return 0;
+}
+
static struct shash_alg sha512_alg = {
.digestsize = SHA512_DIGEST_SIZE,
.init = sha512_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha512_export,
+ .import = sha512_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha512",
.cra_driver_name= "sha512-s390",
@@ -78,7 +111,10 @@
.init = sha384_init,
.update = s390_sha_update,
.final = s390_sha_final,
+ .export = sha512_export,
+ .import = sha512_import,
.descsize = sizeof(struct s390_sha_ctx),
+ .statesize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha384",
.cra_driver_name= "sha384-s390",
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index fcba206..4e91a25 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -900,7 +900,7 @@
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 5a805df..bd9914b 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -355,11 +355,7 @@
{
struct dentry *dentry;
struct inode *inode;
- struct qstr qname;
- qname.name = name;
- qname.len = strlen(name);
- qname.hash = full_name_hash(name, qname.len);
mutex_lock(&parent->d_inode->i_mutex);
dentry = lookup_one_len(name, parent, strlen(name));
if (IS_ERR(dentry)) {
@@ -426,7 +422,7 @@
char tmp[TMP_SIZE];
struct dentry *dentry;
- snprintf(tmp, TMP_SIZE, "%lld\n", (unsigned long long int)value);
+ snprintf(tmp, TMP_SIZE, "%llu\n", (unsigned long long int)value);
buffer = kstrdup(tmp, GFP_KERNEL);
if (!buffer)
return ERR_PTR(-ENOMEM);
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index c7d0abf..ae7c8f9 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -1,33 +1,23 @@
#ifndef __ARCH_S390_ATOMIC__
#define __ARCH_S390_ATOMIC__
+/*
+ * Copyright 1999,2009 IBM Corp.
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ * Denis Joseph Barrow,
+ * Arnd Bergmann <arndb@de.ibm.com>,
+ *
+ * Atomic operations that C can't guarantee us.
+ * Useful for resource counting etc.
+ * s390 uses 'Compare And Swap' for atomicity in SMP enviroment.
+ *
+ */
+
#include <linux/compiler.h>
#include <linux/types.h>
-/*
- * include/asm-s390/atomic.h
- *
- * S390 version
- * Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- * Denis Joseph Barrow,
- * Arnd Bergmann (arndb@de.ibm.com)
- *
- * Derived from "include/asm-i386/bitops.h"
- * Copyright (C) 1992, Linus Torvalds
- *
- */
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
- */
-
#define ATOMIC_INIT(i) { (i) }
-#ifdef __KERNEL__
-
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
#define __CS_LOOP(ptr, op_val, op_string) ({ \
@@ -77,7 +67,7 @@
barrier();
}
-static __inline__ int atomic_add_return(int i, atomic_t * v)
+static inline int atomic_add_return(int i, atomic_t *v)
{
return __CS_LOOP(v, i, "ar");
}
@@ -87,7 +77,7 @@
#define atomic_inc_return(_v) atomic_add_return(1, _v)
#define atomic_inc_and_test(_v) (atomic_add_return(1, _v) == 0)
-static __inline__ int atomic_sub_return(int i, atomic_t * v)
+static inline int atomic_sub_return(int i, atomic_t *v)
{
return __CS_LOOP(v, i, "sr");
}
@@ -97,19 +87,19 @@
#define atomic_dec_return(_v) atomic_sub_return(1, _v)
#define atomic_dec_and_test(_v) (atomic_sub_return(1, _v) == 0)
-static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
{
- __CS_LOOP(v, ~mask, "nr");
+ __CS_LOOP(v, ~mask, "nr");
}
-static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
{
- __CS_LOOP(v, mask, "or");
+ __CS_LOOP(v, mask, "or");
}
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
asm volatile(
@@ -127,7 +117,7 @@
return old;
}
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
@@ -146,9 +136,10 @@
#undef __CS_LOOP
-#ifdef __s390x__
#define ATOMIC64_INIT(i) { (i) }
+#ifdef CONFIG_64BIT
+
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
#define __CSG_LOOP(ptr, op_val, op_string) ({ \
@@ -162,7 +153,7 @@
: "=&d" (old_val), "=&d" (new_val), \
"=Q" (((atomic_t *)(ptr))->counter) \
: "d" (op_val), "Q" (((atomic_t *)(ptr))->counter) \
- : "cc", "memory" ); \
+ : "cc", "memory"); \
new_val; \
})
@@ -180,7 +171,7 @@
"=m" (((atomic_t *)(ptr))->counter) \
: "a" (ptr), "d" (op_val), \
"m" (((atomic_t *)(ptr))->counter) \
- : "cc", "memory" ); \
+ : "cc", "memory"); \
new_val; \
})
@@ -198,39 +189,29 @@
barrier();
}
-static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
{
return __CSG_LOOP(v, i, "agr");
}
-#define atomic64_add(_i, _v) atomic64_add_return(_i, _v)
-#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v) atomic64_add_return(1, _v)
-#define atomic64_inc_return(_v) atomic64_add_return(1, _v)
-#define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0)
-static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
{
return __CSG_LOOP(v, i, "sgr");
}
-#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v)
-#define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v) atomic64_sub_return(1, _v)
-#define atomic64_dec_return(_v) atomic64_sub_return(1, _v)
-#define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0)
-static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v)
{
- __CSG_LOOP(v, ~mask, "ngr");
+ __CSG_LOOP(v, ~mask, "ngr");
}
-static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
{
- __CSG_LOOP(v, mask, "ogr");
+ __CSG_LOOP(v, mask, "ogr");
}
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
+static inline long long atomic64_cmpxchg(atomic64_t *v,
long long old, long long new)
{
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
@@ -249,8 +230,112 @@
return old;
}
-static __inline__ int atomic64_add_unless(atomic64_t *v,
- long long a, long long u)
+#undef __CSG_LOOP
+
+#else /* CONFIG_64BIT */
+
+typedef struct {
+ long long counter;
+} atomic64_t;
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+ register_pair rp;
+
+ asm volatile(
+ " lm %0,%N0,0(%1)"
+ : "=&d" (rp)
+ : "a" (&v->counter), "m" (v->counter)
+ );
+ return rp.pair;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ register_pair rp = {.pair = i};
+
+ asm volatile(
+ " stm %1,%N1,0(%2)"
+ : "=m" (v->counter)
+ : "d" (rp), "a" (&v->counter)
+ );
+}
+
+static inline long long atomic64_xchg(atomic64_t *v, long long new)
+{
+ register_pair rp_new = {.pair = new};
+ register_pair rp_old;
+
+ asm volatile(
+ " lm %0,%N0,0(%2)\n"
+ "0: cds %0,%3,0(%2)\n"
+ " jl 0b\n"
+ : "=&d" (rp_old), "+m" (v->counter)
+ : "a" (&v->counter), "d" (rp_new)
+ : "cc");
+ return rp_old.pair;
+}
+
+static inline long long atomic64_cmpxchg(atomic64_t *v,
+ long long old, long long new)
+{
+ register_pair rp_old = {.pair = old};
+ register_pair rp_new = {.pair = new};
+
+ asm volatile(
+ " cds %0,%3,0(%2)"
+ : "+&d" (rp_old), "+m" (v->counter)
+ : "a" (&v->counter), "d" (rp_new)
+ : "cc");
+ return rp_old.pair;
+}
+
+
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old + i;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+ return new;
+}
+
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old - i;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+ return new;
+}
+
+static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old | mask;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
+{
+ long long old, new;
+
+ do {
+ old = atomic64_read(v);
+ new = old & mask;
+ } while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+#endif /* CONFIG_64BIT */
+
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
{
long long c, old;
c = atomic64_read(v);
@@ -265,15 +350,17 @@
return c != u;
}
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#undef __CSG_LOOP
-
-#else /* __s390x__ */
-
-#include <asm-generic/atomic64.h>
-
-#endif /* __s390x__ */
+#define atomic64_add(_i, _v) atomic64_add_return(_i, _v)
+#define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0)
+#define atomic64_inc(_v) atomic64_add_return(1, _v)
+#define atomic64_inc_return(_v) atomic64_add_return(1, _v)
+#define atomic64_inc_and_test(_v) (atomic64_add_return(1, _v) == 0)
+#define atomic64_sub(_i, _v) atomic64_sub_return(_i, _v)
+#define atomic64_sub_and_test(_i, _v) (atomic64_sub_return(_i, _v) == 0)
+#define atomic64_dec(_v) atomic64_sub_return(1, _v)
+#define atomic64_dec_return(_v) atomic64_sub_return(1, _v)
+#define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0)
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
@@ -281,5 +368,5 @@
#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic-long.h>
-#endif /* __KERNEL__ */
+
#endif /* __ARCH_S390_ATOMIC__ */
diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
index d5a8e7c..6c00f68 100644
--- a/arch/s390/include/asm/checksum.h
+++ b/arch/s390/include/asm/checksum.h
@@ -78,28 +78,11 @@
*/
static inline __sum16 csum_fold(__wsum sum)
{
-#ifndef __s390x__
- register_pair rp;
+ u32 csum = (__force u32) sum;
- asm volatile(
- " slr %N1,%N1\n" /* %0 = H L */
- " lr %1,%0\n" /* %0 = H L, %1 = H L 0 0 */
- " srdl %1,16\n" /* %0 = H L, %1 = 0 H L 0 */
- " alr %1,%N1\n" /* %0 = H L, %1 = L H L 0 */
- " alr %0,%1\n" /* %0 = H+L+C L+H */
- " srl %0,16\n" /* %0 = H+L+C */
- : "+&d" (sum), "=d" (rp) : : "cc");
-#else /* __s390x__ */
- asm volatile(
- " sr 3,3\n" /* %0 = H*65536 + L */
- " lr 2,%0\n" /* %0 = H L, 2/3 = H L / 0 0 */
- " srdl 2,16\n" /* %0 = H L, 2/3 = 0 H / L 0 */
- " alr 2,3\n" /* %0 = H L, 2/3 = L H / L 0 */
- " alr %0,2\n" /* %0 = H+L+C L+H */
- " srl %0,16\n" /* %0 = H+L+C */
- : "+&d" (sum) : : "cc", "2", "3");
-#endif /* __s390x__ */
- return (__force __sum16) ~sum;
+ csum += (csum >> 16) + (csum << 16);
+ csum >>= 16;
+ return (__force __sum16) ~csum;
}
/*
diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h
index 807997f..4943654 100644
--- a/arch/s390/include/asm/chsc.h
+++ b/arch/s390/include/asm/chsc.h
@@ -125,4 +125,32 @@
#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
+#ifdef __KERNEL__
+
+struct css_general_char {
+ u64 : 12;
+ u32 dynio : 1; /* bit 12 */
+ u32 : 28;
+ u32 aif : 1; /* bit 41 */
+ u32 : 3;
+ u32 mcss : 1; /* bit 45 */
+ u32 fcs : 1; /* bit 46 */
+ u32 : 1;
+ u32 ext_mb : 1; /* bit 48 */
+ u32 : 7;
+ u32 aif_tdd : 1; /* bit 56 */
+ u32 : 1;
+ u32 qebsm : 1; /* bit 58 */
+ u32 : 8;
+ u32 aif_osa : 1; /* bit 67 */
+ u32 : 14;
+ u32 cib : 1; /* bit 82 */
+ u32 : 5;
+ u32 fcx : 1; /* bit 88 */
+ u32 : 7;
+}__attribute__((packed));
+
+extern struct css_general_char css_general_characteristics;
+
+#endif /* __KERNEL__ */
#endif
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 619bf94..e85679a 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -15,228 +15,7 @@
#define LPM_ANYPATH 0xff
#define __MAX_CSSID 0
-/**
- * struct cmd_scsw - command-mode subchannel status word
- * @key: subchannel key
- * @sctl: suspend control
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @pfch: prefetch
- * @isic: initial-status interruption control
- * @alcc: address-limit checking control
- * @ssi: suppress-suspended interruption
- * @zcc: zero condition code
- * @ectl: extended control
- * @pno: path not operational
- * @res: reserved
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @cpa: channel program address
- * @dstat: device status
- * @cstat: subchannel status
- * @count: residual count
- */
-struct cmd_scsw {
- __u32 key : 4;
- __u32 sctl : 1;
- __u32 eswf : 1;
- __u32 cc : 2;
- __u32 fmt : 1;
- __u32 pfch : 1;
- __u32 isic : 1;
- __u32 alcc : 1;
- __u32 ssi : 1;
- __u32 zcc : 1;
- __u32 ectl : 1;
- __u32 pno : 1;
- __u32 res : 1;
- __u32 fctl : 3;
- __u32 actl : 7;
- __u32 stctl : 5;
- __u32 cpa;
- __u32 dstat : 8;
- __u32 cstat : 8;
- __u32 count : 16;
-} __attribute__ ((packed));
-
-/**
- * struct tm_scsw - transport-mode subchannel status word
- * @key: subchannel key
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @x: IRB-format control
- * @q: interrogate-complete
- * @ectl: extended control
- * @pno: path not operational
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @tcw: TCW address
- * @dstat: device status
- * @cstat: subchannel status
- * @fcxs: FCX status
- * @schxs: subchannel-extended status
- */
-struct tm_scsw {
- u32 key:4;
- u32 :1;
- u32 eswf:1;
- u32 cc:2;
- u32 fmt:3;
- u32 x:1;
- u32 q:1;
- u32 :1;
- u32 ectl:1;
- u32 pno:1;
- u32 :1;
- u32 fctl:3;
- u32 actl:7;
- u32 stctl:5;
- u32 tcw;
- u32 dstat:8;
- u32 cstat:8;
- u32 fcxs:8;
- u32 schxs:8;
-} __attribute__ ((packed));
-
-/**
- * union scsw - subchannel status word
- * @cmd: command-mode SCSW
- * @tm: transport-mode SCSW
- */
-union scsw {
- struct cmd_scsw cmd;
- struct tm_scsw tm;
-} __attribute__ ((packed));
-
-int scsw_is_tm(union scsw *scsw);
-u32 scsw_key(union scsw *scsw);
-u32 scsw_eswf(union scsw *scsw);
-u32 scsw_cc(union scsw *scsw);
-u32 scsw_ectl(union scsw *scsw);
-u32 scsw_pno(union scsw *scsw);
-u32 scsw_fctl(union scsw *scsw);
-u32 scsw_actl(union scsw *scsw);
-u32 scsw_stctl(union scsw *scsw);
-u32 scsw_dstat(union scsw *scsw);
-u32 scsw_cstat(union scsw *scsw);
-int scsw_is_solicited(union scsw *scsw);
-int scsw_is_valid_key(union scsw *scsw);
-int scsw_is_valid_eswf(union scsw *scsw);
-int scsw_is_valid_cc(union scsw *scsw);
-int scsw_is_valid_ectl(union scsw *scsw);
-int scsw_is_valid_pno(union scsw *scsw);
-int scsw_is_valid_fctl(union scsw *scsw);
-int scsw_is_valid_actl(union scsw *scsw);
-int scsw_is_valid_stctl(union scsw *scsw);
-int scsw_is_valid_dstat(union scsw *scsw);
-int scsw_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_valid_key(union scsw *scsw);
-int scsw_cmd_is_valid_sctl(union scsw *scsw);
-int scsw_cmd_is_valid_eswf(union scsw *scsw);
-int scsw_cmd_is_valid_cc(union scsw *scsw);
-int scsw_cmd_is_valid_fmt(union scsw *scsw);
-int scsw_cmd_is_valid_pfch(union scsw *scsw);
-int scsw_cmd_is_valid_isic(union scsw *scsw);
-int scsw_cmd_is_valid_alcc(union scsw *scsw);
-int scsw_cmd_is_valid_ssi(union scsw *scsw);
-int scsw_cmd_is_valid_zcc(union scsw *scsw);
-int scsw_cmd_is_valid_ectl(union scsw *scsw);
-int scsw_cmd_is_valid_pno(union scsw *scsw);
-int scsw_cmd_is_valid_fctl(union scsw *scsw);
-int scsw_cmd_is_valid_actl(union scsw *scsw);
-int scsw_cmd_is_valid_stctl(union scsw *scsw);
-int scsw_cmd_is_valid_dstat(union scsw *scsw);
-int scsw_cmd_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_solicited(union scsw *scsw);
-int scsw_tm_is_valid_key(union scsw *scsw);
-int scsw_tm_is_valid_eswf(union scsw *scsw);
-int scsw_tm_is_valid_cc(union scsw *scsw);
-int scsw_tm_is_valid_fmt(union scsw *scsw);
-int scsw_tm_is_valid_x(union scsw *scsw);
-int scsw_tm_is_valid_q(union scsw *scsw);
-int scsw_tm_is_valid_ectl(union scsw *scsw);
-int scsw_tm_is_valid_pno(union scsw *scsw);
-int scsw_tm_is_valid_fctl(union scsw *scsw);
-int scsw_tm_is_valid_actl(union scsw *scsw);
-int scsw_tm_is_valid_stctl(union scsw *scsw);
-int scsw_tm_is_valid_dstat(union scsw *scsw);
-int scsw_tm_is_valid_cstat(union scsw *scsw);
-int scsw_tm_is_valid_fcxs(union scsw *scsw);
-int scsw_tm_is_valid_schxs(union scsw *scsw);
-int scsw_tm_is_solicited(union scsw *scsw);
-
-#define SCSW_FCTL_CLEAR_FUNC 0x1
-#define SCSW_FCTL_HALT_FUNC 0x2
-#define SCSW_FCTL_START_FUNC 0x4
-
-#define SCSW_ACTL_SUSPENDED 0x1
-#define SCSW_ACTL_DEVACT 0x2
-#define SCSW_ACTL_SCHACT 0x4
-#define SCSW_ACTL_CLEAR_PEND 0x8
-#define SCSW_ACTL_HALT_PEND 0x10
-#define SCSW_ACTL_START_PEND 0x20
-#define SCSW_ACTL_RESUME_PEND 0x40
-
-#define SCSW_STCTL_STATUS_PEND 0x1
-#define SCSW_STCTL_SEC_STATUS 0x2
-#define SCSW_STCTL_PRIM_STATUS 0x4
-#define SCSW_STCTL_INTER_STATUS 0x8
-#define SCSW_STCTL_ALERT_STATUS 0x10
-
-#define DEV_STAT_ATTENTION 0x80
-#define DEV_STAT_STAT_MOD 0x40
-#define DEV_STAT_CU_END 0x20
-#define DEV_STAT_BUSY 0x10
-#define DEV_STAT_CHN_END 0x08
-#define DEV_STAT_DEV_END 0x04
-#define DEV_STAT_UNIT_CHECK 0x02
-#define DEV_STAT_UNIT_EXCEP 0x01
-
-#define SCHN_STAT_PCI 0x80
-#define SCHN_STAT_INCORR_LEN 0x40
-#define SCHN_STAT_PROG_CHECK 0x20
-#define SCHN_STAT_PROT_CHECK 0x10
-#define SCHN_STAT_CHN_DATA_CHK 0x08
-#define SCHN_STAT_CHN_CTRL_CHK 0x04
-#define SCHN_STAT_INTF_CTRL_CHK 0x02
-#define SCHN_STAT_CHAIN_CHECK 0x01
-
-/*
- * architectured values for first sense byte
- */
-#define SNS0_CMD_REJECT 0x80
-#define SNS_CMD_REJECT SNS0_CMD_REJEC
-#define SNS0_INTERVENTION_REQ 0x40
-#define SNS0_BUS_OUT_CHECK 0x20
-#define SNS0_EQUIPMENT_CHECK 0x10
-#define SNS0_DATA_CHECK 0x08
-#define SNS0_OVERRUN 0x04
-#define SNS0_INCOMPL_DOMAIN 0x01
-
-/*
- * architectured values for second sense byte
- */
-#define SNS1_PERM_ERR 0x80
-#define SNS1_INV_TRACK_FORMAT 0x40
-#define SNS1_EOC 0x20
-#define SNS1_MESSAGE_TO_OPER 0x10
-#define SNS1_NO_REC_FOUND 0x08
-#define SNS1_FILE_PROTECTED 0x04
-#define SNS1_WRITE_INHIBITED 0x02
-#define SNS1_INPRECISE_END 0x01
-
-/*
- * architectured values for third sense byte
- */
-#define SNS2_REQ_INH_WRITE 0x80
-#define SNS2_CORRECTABLE 0x40
-#define SNS2_FIRST_LOG_ERR 0x20
-#define SNS2_ENV_DATA_PRESENT 0x10
-#define SNS2_INPRECISE_END 0x04
+#include <asm/scsw.h>
/**
* struct ccw1 - channel command word
diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
new file mode 100644
index 0000000..471234b
--- /dev/null
+++ b/arch/s390/include/asm/cpu.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright IBM Corp. 2000,2009
+ * Author(s): Hartmut Penner <hp@de.ibm.com>,
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>,
+ */
+
+#ifndef _ASM_S390_CPU_H
+#define _ASM_S390_CPU_H
+
+#define MAX_CPU_ADDRESS 255
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct cpuid
+{
+ unsigned int version : 8;
+ unsigned int ident : 24;
+ unsigned int machine : 16;
+ unsigned int unused : 16;
+} __packed;
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_S390_CPU_H */
diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h
deleted file mode 100644
index 07836a2..0000000
--- a/arch/s390/include/asm/cpuid.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright IBM Corp. 2000,2009
- * Author(s): Hartmut Penner <hp@de.ibm.com>,
- * Martin Schwidefsky <schwidefsky@de.ibm.com>
- * Christian Ehrhardt <ehrhardt@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPUID_H_
-#define _ASM_S390_CPUID_H_
-
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-typedef struct
-{
- unsigned int version : 8;
- unsigned int ident : 24;
- unsigned int machine : 16;
- unsigned int unused : 16;
-} __attribute__ ((packed)) cpuid_t;
-
-#endif /* _ASM_S390_CPUID_H_ */
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 31ed568..18124b7 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -167,6 +167,10 @@
return debug_event_common(id,level,txt,strlen(txt));
}
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
extern debug_entry_t *
debug_sprintf_event(debug_info_t* id,int level,char *string,...)
__attribute__ ((format(printf, 3, 4)));
@@ -206,7 +210,10 @@
return debug_exception_common(id,level,txt,strlen(txt));
}
-
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
extern debug_entry_t *
debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
__attribute__ ((format(printf, 3, 4)));
diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
index 89ec705..498bc38 100644
--- a/arch/s390/include/asm/hardirq.h
+++ b/arch/s390/include/asm/hardirq.h
@@ -18,13 +18,6 @@
#include <linux/interrupt.h>
#include <asm/lowcore.h>
-/* irq_cpustat_t is unused currently, but could be converted
- * into a percpu variable instead of storing softirq_pending
- * on the lowcore */
-typedef struct {
- unsigned int __softirq_pending;
-} irq_cpustat_t;
-
#define local_softirq_pending() (S390_lowcore.softirq_pending)
#define __ARCH_IRQ_STAT
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 1171e6d..5e95d95 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -57,6 +57,8 @@
} __attribute__((packed));
#define DIAG308_VMPARM_SIZE 64
+#define DIAG308_SCPDATA_SIZE (PAGE_SIZE - (sizeof(struct ipl_list_hdr) + \
+ offsetof(struct ipl_block_fcp, scp_data)))
struct ipl_block_ccw {
u8 load_parm[8];
@@ -91,7 +93,8 @@
extern void do_poff(void);
extern void ipl_save_parameters(void);
extern void ipl_update_parameters(void);
-extern void get_ipl_vmparm(char *);
+extern size_t append_ipl_vmparm(char *, size_t);
+extern size_t append_ipl_scpdata(char *, size_t);
enum {
IPL_DEVNO_VALID = 1,
diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
index 0b2f829..3dfcaeb 100644
--- a/arch/s390/include/asm/kvm.h
+++ b/arch/s390/include/asm/kvm.h
@@ -15,15 +15,6 @@
*/
#include <linux/types.h>
-/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
-struct kvm_pic_state {
- /* no PIC for s390 */
-};
-
-struct kvm_ioapic_state {
- /* no IOAPIC for s390 */
-};
-
/* for KVM_GET_REGS and KVM_SET_REGS */
struct kvm_regs {
/* general purpose regs for s390 */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 1cd02f6..27605b6 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -1,7 +1,7 @@
/*
* asm-s390/kvm_host.h - definition for kernel virtual machines on s390
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -17,7 +17,7 @@
#include <linux/interrupt.h>
#include <linux/kvm_host.h>
#include <asm/debug.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
#define KVM_MAX_VCPUS 64
#define KVM_MEMORY_SLOTS 32
@@ -40,7 +40,11 @@
struct sca_entry cpu[64];
} __attribute__((packed));
-#define KVM_PAGES_PER_HPAGE 256
+#define KVM_NR_PAGE_SIZES 2
+#define KVM_HPAGE_SHIFT(x) (PAGE_SHIFT + ((x) - 1) * 8)
+#define KVM_HPAGE_SIZE(x) (1UL << KVM_HPAGE_SHIFT(x))
+#define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1))
+#define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE)
#define CPUSTAT_HOST 0x80000000
#define CPUSTAT_WAIT 0x10000000
@@ -182,8 +186,9 @@
};
/* for local_interrupt.action_flags */
-#define ACTION_STORE_ON_STOP 1
-#define ACTION_STOP_ON_STOP 2
+#define ACTION_STORE_ON_STOP (1<<0)
+#define ACTION_STOP_ON_STOP (1<<1)
+#define ACTION_RELOADVCPU_ON_STOP (1<<2)
struct kvm_s390_local_interrupt {
spinlock_t lock;
@@ -217,8 +222,8 @@
struct hrtimer ckc_timer;
struct tasklet_struct tasklet;
union {
- cpuid_t cpu_id;
- u64 stidp_data;
+ struct cpuid cpu_id;
+ u64 stidp_data;
};
};
@@ -227,8 +232,6 @@
};
struct kvm_arch{
- unsigned long guest_origin;
- unsigned long guest_memsize;
struct sca_block *sca;
debug_info_t *dbf;
struct kvm_s390_float_interrupt float_int;
diff --git a/arch/s390/include/asm/kvm_para.h b/arch/s390/include/asm/kvm_para.h
index 2c50379..6964db2 100644
--- a/arch/s390/include/asm/kvm_para.h
+++ b/arch/s390/include/asm/kvm_para.h
@@ -13,6 +13,8 @@
#ifndef __S390_KVM_PARA_H
#define __S390_KVM_PARA_H
+#ifdef __KERNEL__
+
/*
* Hypercalls for KVM on s390. The calling convention is similar to the
* s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1
@@ -147,4 +149,6 @@
return 0;
}
+#endif
+
#endif /* __S390_KVM_PARA_H */
diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
index 0503936..acdfdff 100644
--- a/arch/s390/include/asm/kvm_virtio.h
+++ b/arch/s390/include/asm/kvm_virtio.h
@@ -54,14 +54,4 @@
* This is pagesize for historical reasons. */
#define KVM_S390_VIRTIO_RING_ALIGN 4096
-#ifdef __KERNEL__
-/* early virtio console setup */
-#ifdef CONFIG_S390_GUEST
-extern void s390_virtio_console_init(void);
-#else
-static inline void s390_virtio_console_init(void)
-{
-}
-#endif /* CONFIG_VIRTIO_CONSOLE */
-#endif /* __KERNEL__ */
#endif
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 5046ad6..6bc9426 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -132,7 +132,7 @@
#ifndef __ASSEMBLY__
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
#include <asm/ptrace.h>
#include <linux/types.h>
@@ -275,7 +275,7 @@
__u32 user_exec_asce; /* 0x02ac */
/* SMP info area */
- cpuid_t cpu_id; /* 0x02b0 */
+ struct cpuid cpu_id; /* 0x02b0 */
__u32 cpu_nr; /* 0x02b8 */
__u32 softirq_pending; /* 0x02bc */
__u32 percpu_offset; /* 0x02c0 */
@@ -380,7 +380,7 @@
__u64 user_exec_asce; /* 0x0318 */
/* SMP info area */
- cpuid_t cpu_id; /* 0x0320 */
+ struct cpuid cpu_id; /* 0x0320 */
__u32 cpu_nr; /* 0x0328 */
__u32 softirq_pending; /* 0x032c */
__u64 percpu_offset; /* 0x0330 */
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 3b59216..03be999 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -2,6 +2,7 @@
#define __MMU_H
typedef struct {
+ spinlock_t list_lock;
struct list_head crst_list;
struct list_head pgtable_list;
unsigned long asce_bits;
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 3e3594d..5e9daf5 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -125,8 +125,6 @@
return skey;
}
-#ifdef CONFIG_PAGE_STATES
-
struct page;
void arch_free_page(struct page *page, int order);
void arch_alloc_page(struct page *page, int order);
@@ -134,8 +132,6 @@
#define HAVE_ARCH_FREE_PAGE
#define HAVE_ARCH_ALLOC_PAGE
-#endif
-
#endif /* !__ASSEMBLY__ */
#define __PAGE_OFFSET 0x0UL
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index b2658b9..ddad590 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -140,6 +140,7 @@
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
+ spin_lock_init(&mm->context.list_lock);
INIT_LIST_HEAD(&mm->context.crst_list);
INIT_LIST_HEAD(&mm->context.pgtable_list);
return (pgd_t *) crst_table_alloc(mm, s390_noexec);
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index c139fa7..cf8eed3 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,7 +14,7 @@
#define __ASM_S390_PROCESSOR_H
#include <linux/linkage.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/setup.h>
@@ -26,7 +26,7 @@
*/
#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
-static inline void get_cpu_id(cpuid_t *ptr)
+static inline void get_cpu_id(struct cpuid *ptr)
{
asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
}
diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 29ec8e2..35d786f 100644
--- a/arch/s390/include/asm/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
@@ -1,19 +1 @@
-#ifndef _ASMS390_SCATTERLIST_H
-#define _ASMS390_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length;
-};
-
-#ifdef __s390x__
-#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
-#else
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-#endif
-
-#endif /* _ASMS390X_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/s390/include/asm/scsw.h b/arch/s390/include/asm/scsw.h
new file mode 100644
index 0000000..de389cb
--- /dev/null
+++ b/arch/s390/include/asm/scsw.h
@@ -0,0 +1,956 @@
+/*
+ * Helper functions for scsw access.
+ *
+ * Copyright IBM Corp. 2008,2009
+ * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_SCSW_H_
+#define _ASM_S390_SCSW_H_
+
+#include <linux/types.h>
+#include <asm/chsc.h>
+#include <asm/cio.h>
+
+/**
+ * struct cmd_scsw - command-mode subchannel status word
+ * @key: subchannel key
+ * @sctl: suspend control
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @pfch: prefetch
+ * @isic: initial-status interruption control
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
+ * @zcc: zero condition code
+ * @ectl: extended control
+ * @pno: path not operational
+ * @res: reserved
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @cpa: channel program address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @count: residual count
+ */
+struct cmd_scsw {
+ __u32 key : 4;
+ __u32 sctl : 1;
+ __u32 eswf : 1;
+ __u32 cc : 2;
+ __u32 fmt : 1;
+ __u32 pfch : 1;
+ __u32 isic : 1;
+ __u32 alcc : 1;
+ __u32 ssi : 1;
+ __u32 zcc : 1;
+ __u32 ectl : 1;
+ __u32 pno : 1;
+ __u32 res : 1;
+ __u32 fctl : 3;
+ __u32 actl : 7;
+ __u32 stctl : 5;
+ __u32 cpa;
+ __u32 dstat : 8;
+ __u32 cstat : 8;
+ __u32 count : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+ u32 key:4;
+ u32 :1;
+ u32 eswf:1;
+ u32 cc:2;
+ u32 fmt:3;
+ u32 x:1;
+ u32 q:1;
+ u32 :1;
+ u32 ectl:1;
+ u32 pno:1;
+ u32 :1;
+ u32 fctl:3;
+ u32 actl:7;
+ u32 stctl:5;
+ u32 tcw;
+ u32 dstat:8;
+ u32 cstat:8;
+ u32 fcxs:8;
+ u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+ struct cmd_scsw cmd;
+ struct tm_scsw tm;
+} __attribute__ ((packed));
+
+#define SCSW_FCTL_CLEAR_FUNC 0x1
+#define SCSW_FCTL_HALT_FUNC 0x2
+#define SCSW_FCTL_START_FUNC 0x4
+
+#define SCSW_ACTL_SUSPENDED 0x1
+#define SCSW_ACTL_DEVACT 0x2
+#define SCSW_ACTL_SCHACT 0x4
+#define SCSW_ACTL_CLEAR_PEND 0x8
+#define SCSW_ACTL_HALT_PEND 0x10
+#define SCSW_ACTL_START_PEND 0x20
+#define SCSW_ACTL_RESUME_PEND 0x40
+
+#define SCSW_STCTL_STATUS_PEND 0x1
+#define SCSW_STCTL_SEC_STATUS 0x2
+#define SCSW_STCTL_PRIM_STATUS 0x4
+#define SCSW_STCTL_INTER_STATUS 0x8
+#define SCSW_STCTL_ALERT_STATUS 0x10
+
+#define DEV_STAT_ATTENTION 0x80
+#define DEV_STAT_STAT_MOD 0x40
+#define DEV_STAT_CU_END 0x20
+#define DEV_STAT_BUSY 0x10
+#define DEV_STAT_CHN_END 0x08
+#define DEV_STAT_DEV_END 0x04
+#define DEV_STAT_UNIT_CHECK 0x02
+#define DEV_STAT_UNIT_EXCEP 0x01
+
+#define SCHN_STAT_PCI 0x80
+#define SCHN_STAT_INCORR_LEN 0x40
+#define SCHN_STAT_PROG_CHECK 0x20
+#define SCHN_STAT_PROT_CHECK 0x10
+#define SCHN_STAT_CHN_DATA_CHK 0x08
+#define SCHN_STAT_CHN_CTRL_CHK 0x04
+#define SCHN_STAT_INTF_CTRL_CHK 0x02
+#define SCHN_STAT_CHAIN_CHECK 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT 0x80
+#define SNS_CMD_REJECT SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ 0x40
+#define SNS0_BUS_OUT_CHECK 0x20
+#define SNS0_EQUIPMENT_CHECK 0x10
+#define SNS0_DATA_CHECK 0x08
+#define SNS0_OVERRUN 0x04
+#define SNS0_INCOMPL_DOMAIN 0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR 0x80
+#define SNS1_INV_TRACK_FORMAT 0x40
+#define SNS1_EOC 0x20
+#define SNS1_MESSAGE_TO_OPER 0x10
+#define SNS1_NO_REC_FOUND 0x08
+#define SNS1_FILE_PROTECTED 0x04
+#define SNS1_WRITE_INHIBITED 0x02
+#define SNS1_INPRECISE_END 0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE 0x80
+#define SNS2_CORRECTABLE 0x40
+#define SNS2_FIRST_LOG_ERR 0x20
+#define SNS2_ENV_DATA_PRESENT 0x10
+#define SNS2_INPRECISE_END 0x04
+
+/**
+ * scsw_is_tm - check for transport mode scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the specified scsw is a transport mode scsw, zero
+ * otherwise.
+ */
+static inline int scsw_is_tm(union scsw *scsw)
+{
+ return css_general_characteristics.fcx && (scsw->tm.x == 1);
+}
+
+/**
+ * scsw_key - return scsw key field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the key field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_key(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.key;
+ else
+ return scsw->cmd.key;
+}
+
+/**
+ * scsw_eswf - return scsw eswf field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the eswf field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_eswf(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.eswf;
+ else
+ return scsw->cmd.eswf;
+}
+
+/**
+ * scsw_cc - return scsw cc field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the cc field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_cc(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.cc;
+ else
+ return scsw->cmd.cc;
+}
+
+/**
+ * scsw_ectl - return scsw ectl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the ectl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_ectl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.ectl;
+ else
+ return scsw->cmd.ectl;
+}
+
+/**
+ * scsw_pno - return scsw pno field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the pno field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_pno(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.pno;
+ else
+ return scsw->cmd.pno;
+}
+
+/**
+ * scsw_fctl - return scsw fctl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the fctl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_fctl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.fctl;
+ else
+ return scsw->cmd.fctl;
+}
+
+/**
+ * scsw_actl - return scsw actl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the actl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_actl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.actl;
+ else
+ return scsw->cmd.actl;
+}
+
+/**
+ * scsw_stctl - return scsw stctl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the stctl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_stctl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.stctl;
+ else
+ return scsw->cmd.stctl;
+}
+
+/**
+ * scsw_dstat - return scsw dstat field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the dstat field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_dstat(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.dstat;
+ else
+ return scsw->cmd.dstat;
+}
+
+/**
+ * scsw_cstat - return scsw cstat field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the cstat field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_cstat(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw->tm.cstat;
+ else
+ return scsw->cmd.cstat;
+}
+
+/**
+ * scsw_cmd_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_key(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_sctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_sctl(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_eswf(union scsw *scsw)
+{
+ return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_cmd_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_cc(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
+ (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_cmd_is_valid_fmt - check fmt field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fmt field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_fmt(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_pfch - check pfch field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pfch field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_pfch(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_isic - check isic field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the isic field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_isic(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_alcc - check alcc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the alcc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_alcc(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_ssi - check ssi field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ssi field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_ssi(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_zcc - check zcc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the zcc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_zcc(union scsw *scsw)
+{
+ return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
+ (scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS);
+}
+
+/**
+ * scsw_cmd_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_ectl(union scsw *scsw)
+{
+ return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+ !(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
+ (scsw->cmd.stctl & SCSW_STCTL_ALERT_STATUS);
+}
+
+/**
+ * scsw_cmd_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_pno(union scsw *scsw)
+{
+ return (scsw->cmd.fctl != 0) &&
+ (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+ (!(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) ||
+ ((scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
+ (scsw->cmd.actl & SCSW_ACTL_SUSPENDED)));
+}
+
+/**
+ * scsw_cmd_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_fctl(union scsw *scsw)
+{
+ /* Only valid if pmcw.dnv == 1*/
+ return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_actl(union scsw *scsw)
+{
+ /* Only valid if pmcw.dnv == 1*/
+ return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_stctl(union scsw *scsw)
+{
+ /* Only valid if pmcw.dnv == 1*/
+ return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_dstat(union scsw *scsw)
+{
+ return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+ (scsw->cmd.cc != 3);
+}
+
+/**
+ * scsw_cmd_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_cstat(union scsw *scsw)
+{
+ return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+ (scsw->cmd.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_key(union scsw *scsw)
+{
+ return (scsw->tm.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_tm_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_eswf(union scsw *scsw)
+{
+ return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_tm_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_cc(union scsw *scsw)
+{
+ return (scsw->tm.fctl & SCSW_FCTL_START_FUNC) &&
+ (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_tm_is_valid_fmt - check fmt field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fmt field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fmt(union scsw *scsw)
+{
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_x - check x field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the x field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_x(union scsw *scsw)
+{
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_q - check q field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the q field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_q(union scsw *scsw)
+{
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_ectl(union scsw *scsw)
+{
+ return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+ !(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
+ (scsw->tm.stctl & SCSW_STCTL_ALERT_STATUS);
+}
+
+/**
+ * scsw_tm_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_pno(union scsw *scsw)
+{
+ return (scsw->tm.fctl != 0) &&
+ (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+ (!(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) ||
+ ((scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
+ (scsw->tm.actl & SCSW_ACTL_SUSPENDED)));
+}
+
+/**
+ * scsw_tm_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fctl(union scsw *scsw)
+{
+ /* Only valid if pmcw.dnv == 1*/
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_actl(union scsw *scsw)
+{
+ /* Only valid if pmcw.dnv == 1*/
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_stctl(union scsw *scsw)
+{
+ /* Only valid if pmcw.dnv == 1*/
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_dstat(union scsw *scsw)
+{
+ return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+ (scsw->tm.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_cstat(union scsw *scsw)
+{
+ return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+ (scsw->tm.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_fcxs - check fcxs field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fcxs field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fcxs(union scsw *scsw)
+{
+ return 1;
+}
+
+/**
+ * scsw_tm_is_valid_schxs - check schxs field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the schxs field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_schxs(union scsw *scsw)
+{
+ return (scsw->tm.cstat & (SCHN_STAT_PROG_CHECK |
+ SCHN_STAT_INTF_CTRL_CHK |
+ SCHN_STAT_PROT_CHECK |
+ SCHN_STAT_CHN_DATA_CHK));
+}
+
+/**
+ * scsw_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_actl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_actl(scsw);
+ else
+ return scsw_cmd_is_valid_actl(scsw);
+}
+
+/**
+ * scsw_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_cc(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_cc(scsw);
+ else
+ return scsw_cmd_is_valid_cc(scsw);
+}
+
+/**
+ * scsw_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_cstat(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_cstat(scsw);
+ else
+ return scsw_cmd_is_valid_cstat(scsw);
+}
+
+/**
+ * scsw_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_dstat(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_dstat(scsw);
+ else
+ return scsw_cmd_is_valid_dstat(scsw);
+}
+
+/**
+ * scsw_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_ectl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_ectl(scsw);
+ else
+ return scsw_cmd_is_valid_ectl(scsw);
+}
+
+/**
+ * scsw_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_eswf(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_eswf(scsw);
+ else
+ return scsw_cmd_is_valid_eswf(scsw);
+}
+
+/**
+ * scsw_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_fctl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_fctl(scsw);
+ else
+ return scsw_cmd_is_valid_fctl(scsw);
+}
+
+/**
+ * scsw_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_key(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_key(scsw);
+ else
+ return scsw_cmd_is_valid_key(scsw);
+}
+
+/**
+ * scsw_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_pno(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_pno(scsw);
+ else
+ return scsw_cmd_is_valid_pno(scsw);
+}
+
+/**
+ * scsw_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_stctl(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_valid_stctl(scsw);
+ else
+ return scsw_cmd_is_valid_stctl(scsw);
+}
+
+/**
+ * scsw_cmd_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the command mode scsw indicates that the associated
+ * status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_cmd_is_solicited(union scsw *scsw)
+{
+ return (scsw->cmd.cc != 0) || (scsw->cmd.stctl !=
+ (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
+}
+
+/**
+ * scsw_tm_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the transport mode scsw indicates that the associated
+ * status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_tm_is_solicited(union scsw *scsw)
+{
+ return (scsw->tm.cc != 0) || (scsw->tm.stctl !=
+ (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
+}
+
+/**
+ * scsw_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the transport or command mode scsw indicates that the
+ * associated status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_is_solicited(union scsw *scsw)
+{
+ if (scsw_is_tm(scsw))
+ return scsw_tm_is_solicited(scsw);
+ else
+ return scsw_cmd_is_solicited(scsw);
+}
+
+#endif /* _ASM_S390_SCSW_H_ */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 38b0fc2..e37478e 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -8,7 +8,7 @@
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
-#define COMMAND_LINE_SIZE 1024
+#define COMMAND_LINE_SIZE 4096
#define ARCH_COMMAND_LINE_SIZE 896
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 72137bc..c991fe6 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -51,32 +51,7 @@
#define PROC_CHANGE_PENALTY 20 /* Schedule penalty */
#define raw_smp_processor_id() (S390_lowcore.cpu_nr)
-
-/*
- * returns 1 if cpu is in stopped/check stopped state or not operational
- * returns 0 otherwise
- */
-static inline int
-smp_cpu_not_running(int cpu)
-{
- __u32 status;
-
- switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
- case sigp_order_code_accepted:
- case sigp_status_stored:
- /* Check for stopped and check stop state */
- if (status & 0x50)
- return 1;
- break;
- case sigp_not_operational:
- return 1;
- default:
- break;
- }
- return 0;
-}
-
-#define cpu_logical_map(cpu) (cpu)
+#define cpu_logical_map(cpu) (cpu)
extern int __cpu_disable (void);
extern void __cpu_die (unsigned int cpu);
@@ -91,11 +66,6 @@
#endif
-#ifndef CONFIG_SMP
-#define hard_smp_processor_id() 0
-#define smp_cpu_not_running(cpu) 1
-#endif
-
#ifdef CONFIG_HOTPLUG_CPU
extern int smp_rescan_cpus(void);
#else
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index 02330c5..e42df89 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -65,4 +65,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index c9af0d19..41ce686 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -191,4 +191,33 @@
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
+#define __always_inline__spin_lock
+#define __always_inline__read_lock
+#define __always_inline__write_lock
+#define __always_inline__spin_lock_bh
+#define __always_inline__read_lock_bh
+#define __always_inline__write_lock_bh
+#define __always_inline__spin_lock_irq
+#define __always_inline__read_lock_irq
+#define __always_inline__write_lock_irq
+#define __always_inline__spin_lock_irqsave
+#define __always_inline__read_lock_irqsave
+#define __always_inline__write_lock_irqsave
+#define __always_inline__spin_trylock
+#define __always_inline__read_trylock
+#define __always_inline__write_trylock
+#define __always_inline__spin_trylock_bh
+#define __always_inline__spin_unlock
+#define __always_inline__read_unlock
+#define __always_inline__write_unlock
+#define __always_inline__spin_unlock_bh
+#define __always_inline__read_unlock_bh
+#define __always_inline__write_unlock_bh
+#define __always_inline__spin_unlock_irq
+#define __always_inline__read_unlock_irq
+#define __always_inline__write_unlock_irq
+#define __always_inline__spin_unlock_irqrestore
+#define __always_inline__read_unlock_irqrestore
+#define __always_inline__write_unlock_irqrestore
+
#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 4fb83c1..379661d 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -109,11 +109,7 @@
#define pfault_fini() do { } while (0)
#endif /* CONFIG_PFAULT */
-#ifdef CONFIG_PAGE_STATES
extern void cmma_init(void);
-#else
-static inline void cmma_init(void) { }
-#endif
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index ba1cab9..07eb61b 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -92,7 +92,7 @@
#define TIF_SYSCALL_TRACE 8 /* syscall trace active */
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
-#define TIF_SYSCALL_FTRACE 11 /* ftrace syscall instrumentation */
+#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
@@ -111,7 +111,7 @@
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
-#define _TIF_SYSCALL_FTRACE (1<<TIF_SYSCALL_FTRACE)
+#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index a07e699..68d9fea 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -98,4 +98,18 @@
extern u64 sched_clock_base_cc;
+/**
+ * get_clock_monotonic - returns current time in clock rate units
+ *
+ * The caller must ensure that preemption is disabled.
+ * The clock and sched_clock_base get changed via stop_machine.
+ * Therefore preemption must be disabled when calling this
+ * function, otherwise the returned value is not guaranteed to
+ * be monotonic.
+ */
+static inline unsigned long long get_clock_monotonic(void)
+{
+ return get_clock_xt() - sched_clock_base_cc;
+}
+
#endif
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index c75ed43..c7be8e1 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -32,7 +32,7 @@
obj-$(CONFIG_MODULES) += s390_ksyms.o module.o
obj-$(CONFIG_SMP) += smp.o topology.o
-
+obj-$(CONFIG_HIBERNATION) += suspend.o swsusp_asm64.o
obj-$(CONFIG_AUDIT) += audit.o
compat-obj-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_COMPAT) += compat_linux.o compat_signal.o \
@@ -41,7 +41,7 @@
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_FUNCTION_TRACER) += mcount.o
+obj-$(CONFIG_FUNCTION_TRACER) += $(if $(CONFIG_64BIT),mcount64.o,mcount.o)
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index cae14c4..bf8b4ae 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -6,6 +6,9 @@
* Heiko Carstens <heiko.carstens@de.ibm.com>
*/
+#define KMSG_COMPONENT "setup"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/errno.h>
@@ -16,6 +19,7 @@
#include <linux/module.h>
#include <linux/pfn.h>
#include <linux/uaccess.h>
+#include <linux/kernel.h>
#include <asm/ebcdic.h>
#include <asm/ipl.h>
#include <asm/lowcore.h>
@@ -35,8 +39,6 @@
char kernel_nss_name[NSS_NAME_SIZE + 1];
-static unsigned long machine_flags;
-
static void __init setup_boot_command_line(void);
/*
@@ -81,6 +83,8 @@
" br 14\n"
" .size savesys_ipl_nss, .-savesys_ipl_nss\n");
+static __initdata char upper_command_line[COMMAND_LINE_SIZE];
+
static noinline __init void create_kernel_nss(void)
{
unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size;
@@ -90,7 +94,6 @@
int response;
size_t len;
char *savesys_ptr;
- char upper_command_line[COMMAND_LINE_SIZE];
char defsys_cmd[DEFSYS_CMD_SIZE];
char savesys_cmd[SAVESYS_CMD_SIZE];
@@ -141,6 +144,8 @@
__cpcmd(defsys_cmd, NULL, 0, &response);
if (response != 0) {
+ pr_err("Defining the Linux kernel NSS failed with rc=%d\n",
+ response);
kernel_nss_name[0] = '\0';
return;
}
@@ -153,8 +158,11 @@
* max SAVESYS_CMD_SIZE
* On error: response contains the numeric portion of cp error message.
* for SAVESYS it will be >= 263
+ * for missing privilege class, it will be 1
*/
- if (response > SAVESYS_CMD_SIZE) {
+ if (response > SAVESYS_CMD_SIZE || response == 1) {
+ pr_err("Saving the Linux kernel NSS failed with rc=%d\n",
+ response);
kernel_nss_name[0] = '\0';
return;
}
@@ -205,12 +213,9 @@
/* Running under KVM? If not we assume z/VM */
if (!memcmp(vmms.vm[0].cpi, "\xd2\xe5\xd4", 3))
- machine_flags |= MACHINE_FLAG_KVM;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
else
- machine_flags |= MACHINE_FLAG_VM;
-
- /* Store machine flags for setting up lowcore early */
- S390_lowcore.machine_flags = machine_flags;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
}
static __init void early_pgm_check_handler(void)
@@ -245,7 +250,7 @@
facilities = stfl();
if (!(facilities & (1UL << 23)) || !(facilities & (1UL << 29)))
return;
- machine_flags |= MACHINE_FLAG_HPAGE;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;
__ctl_set_bit(0, 23);
#endif
}
@@ -263,7 +268,7 @@
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP), "a" (0) : "memory", "cc", "0");
if (!rc)
- machine_flags |= MACHINE_FLAG_MVPG;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_MVPG;
#endif
}
@@ -279,7 +284,7 @@
EX_TABLE(0b,1b)
: "=d" (rc), "=d" (tmp): "0" (-EOPNOTSUPP) : "cc");
if (!rc)
- machine_flags |= MACHINE_FLAG_IEEE;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_IEEE;
#endif
}
@@ -298,7 +303,7 @@
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc", "0", "1", "2");
if (!rc)
- machine_flags |= MACHINE_FLAG_CSP;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_CSP;
#endif
}
@@ -315,7 +320,7 @@
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP), "d" (cpu_address) : "cc");
if (!rc)
- machine_flags |= MACHINE_FLAG_DIAG9C;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG9C;
}
static __init void detect_diag44(void)
@@ -330,7 +335,7 @@
EX_TABLE(0b,1b)
: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc");
if (!rc)
- machine_flags |= MACHINE_FLAG_DIAG44;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG44;
#endif
}
@@ -341,11 +346,11 @@
facilities = stfl();
if (facilities & (1 << 28))
- machine_flags |= MACHINE_FLAG_IDTE;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_IDTE;
if (facilities & (1 << 23))
- machine_flags |= MACHINE_FLAG_PFMF;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_PFMF;
if (facilities & (1 << 4))
- machine_flags |= MACHINE_FLAG_MVCOS;
+ S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
#endif
}
@@ -367,21 +372,35 @@
}
/* Set up boot command line */
+static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t))
+{
+ char *parm, *delim;
+ size_t rc, len;
+
+ len = strlen(boot_command_line);
+
+ delim = boot_command_line + len; /* '\0' character position */
+ parm = boot_command_line + len + 1; /* append right after '\0' */
+
+ rc = ipl_data(parm, COMMAND_LINE_SIZE - len - 1);
+ if (rc) {
+ if (*parm == '=')
+ memmove(boot_command_line, parm + 1, rc);
+ else
+ *delim = ' '; /* replace '\0' with space */
+ }
+}
+
static void __init setup_boot_command_line(void)
{
- char *parm = NULL;
-
/* copy arch command line */
strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
/* append IPL PARM data to the boot command line */
- if (MACHINE_IS_VM) {
- parm = boot_command_line + strlen(boot_command_line);
- *parm++ = ' ';
- get_ipl_vmparm(parm);
- if (parm[0] == '=')
- memmove(boot_command_line, parm + 1, strlen(parm));
- }
+ if (MACHINE_IS_VM)
+ append_to_cmdline(append_ipl_vmparm);
+
+ append_to_cmdline(append_ipl_scpdata);
}
@@ -413,7 +432,6 @@
setup_hpage();
sclp_facilities_detect();
detect_memory_layout(memory_chunk);
- S390_lowcore.machine_flags = machine_flags;
#ifdef CONFIG_DYNAMIC_FTRACE
S390_lowcore.ftrace_func = (unsigned long)ftrace_caller;
#endif
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index c4c80a2..f43d2ee 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -54,7 +54,7 @@
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
- _TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
+ _TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8)
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
@@ -278,7 +278,8 @@
bnz BASED(sysc_work) # there is work to do (signals etc.)
sysc_restore:
#ifdef CONFIG_TRACE_IRQFLAGS
- la %r1,BASED(sysc_restore_trace_psw)
+ la %r1,BASED(sysc_restore_trace_psw_addr)
+ l %r1,0(%r1)
lpsw 0(%r1)
sysc_restore_trace:
TRACE_IRQS_CHECK
@@ -289,10 +290,15 @@
sysc_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+sysc_restore_trace_psw_addr:
+ .long sysc_restore_trace_psw
+
+ .section .data,"aw",@progbits
.align 8
.globl sysc_restore_trace_psw
sysc_restore_trace_psw:
.long 0, sysc_restore_trace + 0x80000000
+ .previous
#endif
#
@@ -606,7 +612,8 @@
bnz BASED(io_work) # there is work to do (signals etc.)
io_restore:
#ifdef CONFIG_TRACE_IRQFLAGS
- la %r1,BASED(io_restore_trace_psw)
+ la %r1,BASED(io_restore_trace_psw_addr)
+ l %r1,0(%r1)
lpsw 0(%r1)
io_restore_trace:
TRACE_IRQS_CHECK
@@ -617,10 +624,15 @@
io_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+io_restore_trace_psw_addr:
+ .long io_restore_trace_psw
+
+ .section .data,"aw",@progbits
.align 8
.globl io_restore_trace_psw
io_restore_trace_psw:
.long 0, io_restore_trace + 0x80000000
+ .previous
#endif
#
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index f6618e9..a6f7b20 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -57,7 +57,7 @@
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
- _TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
+ _TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8)
#define BASED(name) name-system_call(%r13)
@@ -284,10 +284,12 @@
sysc_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+ .section .data,"aw",@progbits
.align 8
.globl sysc_restore_trace_psw
sysc_restore_trace_psw:
.quad 0, sysc_restore_trace
+ .previous
#endif
#
@@ -595,10 +597,12 @@
io_done:
#ifdef CONFIG_TRACE_IRQFLAGS
+ .section .data,"aw",@progbits
.align 8
.globl io_restore_trace_psw
io_restore_trace_psw:
.quad 0, io_restore_trace
+ .previous
#endif
#
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 3e298e6..57bdcb1 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -220,6 +220,29 @@
return syscalls_metadata[nr];
}
+int syscall_name_to_nr(char *name)
+{
+ int i;
+
+ if (!syscalls_metadata)
+ return -1;
+ for (i = 0; i < NR_syscalls; i++)
+ if (syscalls_metadata[i])
+ if (!strcmp(syscalls_metadata[i]->name, name))
+ return i;
+ return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+ syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+ syscalls_metadata[num]->exit_id = id;
+}
+
static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
{
struct syscall_metadata *start;
@@ -237,24 +260,19 @@
return NULL;
}
-void arch_init_ftrace_syscalls(void)
+static int __init arch_init_ftrace_syscalls(void)
{
struct syscall_metadata *meta;
int i;
- static atomic_t refs;
-
- if (atomic_inc_return(&refs) != 1)
- goto out;
syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
GFP_KERNEL);
if (!syscalls_metadata)
- goto out;
+ return -ENOMEM;
for (i = 0; i < NR_syscalls; i++) {
meta = find_syscall_meta((unsigned long)sys_call_table[i]);
syscalls_metadata[i] = meta;
}
- return;
-out:
- atomic_dec(&refs);
+ return 0;
}
+arch_initcall(arch_init_ftrace_syscalls);
#endif
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index ec68823..c52b4f7 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -27,6 +27,7 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/cpu.h>
#ifdef CONFIG_64BIT
#define ARCH_OFFSET 4
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index 2ced846..602b508 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -24,6 +24,7 @@
# Setup stack
#
l %r15,.Linittu-.LPG1(%r13)
+ st %r15,__LC_THREAD_INFO # cache thread info in lowcore
mvc __LC_CURRENT(4),__TI_task(%r15)
ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
st %r15,__LC_KERNEL_STACK # set end of kernel stack
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 65667b2..6a25080 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -62,9 +62,9 @@
clr %r11,%r12
je 5f # no more space in prefix array
4:
- ahi %r8,1 # next cpu (r8 += 1)
- cl %r8,.Llast_cpu-.LPG1(%r13) # is last possible cpu ?
- jl 1b # jump if not last cpu
+ ahi %r8,1 # next cpu (r8 += 1)
+ chi %r8,MAX_CPU_ADDRESS # is last possible cpu ?
+ jle 1b # jump if not last cpu
5:
lhi %r1,2 # mode 2 = esame (dump)
j 6f
@@ -92,6 +92,7 @@
# Setup stack
#
larl %r15,init_thread_union
+ stg %r15,__LC_THREAD_INFO # cache thread info in lowcore
lg %r14,__TI_task(%r15) # cache current in lowcore
stg %r14,__LC_CURRENT
aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
@@ -129,8 +130,6 @@
#ifdef CONFIG_ZFCPDUMP
.Lcurrent_cpu:
.long 0x0
-.Llast_cpu:
- .long 0x0000ffff
.Lpref_arr_ptr:
.long zfcpdump_prefix_array
#endif /* CONFIG_ZFCPDUMP */
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 371a2d8..ee57a42 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -272,17 +272,18 @@
static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
/* VM IPL PARM routines */
-static void reipl_get_ascii_vmparm(char *dest,
+size_t reipl_get_ascii_vmparm(char *dest, size_t size,
const struct ipl_parameter_block *ipb)
{
int i;
- int len = 0;
+ size_t len;
char has_lowercase = 0;
+ len = 0;
if ((ipb->ipl_info.ccw.vm_flags & DIAG308_VM_FLAGS_VP_VALID) &&
(ipb->ipl_info.ccw.vm_parm_len > 0)) {
- len = ipb->ipl_info.ccw.vm_parm_len;
+ len = min_t(size_t, size - 1, ipb->ipl_info.ccw.vm_parm_len);
memcpy(dest, ipb->ipl_info.ccw.vm_parm, len);
/* If at least one character is lowercase, we assume mixed
* case; otherwise we convert everything to lowercase.
@@ -299,14 +300,20 @@
EBCASC(dest, len);
}
dest[len] = 0;
+
+ return len;
}
-void get_ipl_vmparm(char *dest)
+size_t append_ipl_vmparm(char *dest, size_t size)
{
+ size_t rc;
+
+ rc = 0;
if (diag308_set_works && (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_CCW))
- reipl_get_ascii_vmparm(dest, &ipl_block);
+ rc = reipl_get_ascii_vmparm(dest, size, &ipl_block);
else
dest[0] = 0;
+ return rc;
}
static ssize_t ipl_vm_parm_show(struct kobject *kobj,
@@ -314,10 +321,65 @@
{
char parm[DIAG308_VMPARM_SIZE + 1] = {};
- get_ipl_vmparm(parm);
+ append_ipl_vmparm(parm, sizeof(parm));
return sprintf(page, "%s\n", parm);
}
+static size_t scpdata_length(const char* buf, size_t count)
+{
+ while (count) {
+ if (buf[count - 1] != '\0' && buf[count - 1] != ' ')
+ break;
+ count--;
+ }
+ return count;
+}
+
+size_t reipl_append_ascii_scpdata(char *dest, size_t size,
+ const struct ipl_parameter_block *ipb)
+{
+ size_t count;
+ size_t i;
+ int has_lowercase;
+
+ count = min(size - 1, scpdata_length(ipb->ipl_info.fcp.scp_data,
+ ipb->ipl_info.fcp.scp_data_len));
+ if (!count)
+ goto out;
+
+ has_lowercase = 0;
+ for (i = 0; i < count; i++) {
+ if (!isascii(ipb->ipl_info.fcp.scp_data[i])) {
+ count = 0;
+ goto out;
+ }
+ if (!has_lowercase && islower(ipb->ipl_info.fcp.scp_data[i]))
+ has_lowercase = 1;
+ }
+
+ if (has_lowercase)
+ memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+ else
+ for (i = 0; i < count; i++)
+ dest[i] = tolower(ipb->ipl_info.fcp.scp_data[i]);
+out:
+ dest[count] = '\0';
+ return count;
+}
+
+size_t append_ipl_scpdata(char *dest, size_t len)
+{
+ size_t rc;
+
+ rc = 0;
+ if (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_FCP)
+ rc = reipl_append_ascii_scpdata(dest, len, &ipl_block);
+ else
+ dest[0] = 0;
+ return rc;
+}
+
+
static struct kobj_attribute sys_ipl_vm_parm_attr =
__ATTR(parm, S_IRUGO, ipl_vm_parm_show, NULL);
@@ -553,7 +615,7 @@
{
char vmparm[DIAG308_VMPARM_SIZE + 1] = {};
- reipl_get_ascii_vmparm(vmparm, ipb);
+ reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
return sprintf(page, "%s\n", vmparm);
}
@@ -626,6 +688,59 @@
/* FCP reipl device attributes */
+static ssize_t reipl_fcp_scpdata_read(struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ size_t size = reipl_block_fcp->ipl_info.fcp.scp_data_len;
+ void *scp_data = reipl_block_fcp->ipl_info.fcp.scp_data;
+
+ return memory_read_from_buffer(buf, count, &off, scp_data, size);
+}
+
+static ssize_t reipl_fcp_scpdata_write(struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ size_t padding;
+ size_t scpdata_len;
+
+ if (off < 0)
+ return -EINVAL;
+
+ if (off >= DIAG308_SCPDATA_SIZE)
+ return -ENOSPC;
+
+ if (count > DIAG308_SCPDATA_SIZE - off)
+ count = DIAG308_SCPDATA_SIZE - off;
+
+ memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf + off, count);
+ scpdata_len = off + count;
+
+ if (scpdata_len % 8) {
+ padding = 8 - (scpdata_len % 8);
+ memset(reipl_block_fcp->ipl_info.fcp.scp_data + scpdata_len,
+ 0, padding);
+ scpdata_len += padding;
+ }
+
+ reipl_block_fcp->ipl_info.fcp.scp_data_len = scpdata_len;
+ reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN + scpdata_len;
+ reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN + scpdata_len;
+
+ return count;
+}
+
+static struct bin_attribute sys_reipl_fcp_scp_data_attr = {
+ .attr = {
+ .name = "scp_data",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = PAGE_SIZE,
+ .read = reipl_fcp_scpdata_read,
+ .write = reipl_fcp_scpdata_write,
+};
+
DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
reipl_block_fcp->ipl_info.fcp.wwpn);
DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n",
@@ -647,7 +762,6 @@
};
static struct attribute_group reipl_fcp_attr_group = {
- .name = IPL_FCP_STR,
.attrs = reipl_fcp_attrs,
};
@@ -895,6 +1009,7 @@
__ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store);
static struct kset *reipl_kset;
+static struct kset *reipl_fcp_kset;
static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
const enum ipl_method m)
@@ -906,7 +1021,7 @@
reipl_get_ascii_loadparm(loadparm, ipb);
reipl_get_ascii_nss_name(nss_name, ipb);
- reipl_get_ascii_vmparm(vmparm, ipb);
+ reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
switch (m) {
case REIPL_METHOD_CCW_VM:
@@ -1076,23 +1191,44 @@
int rc;
if (!diag308_set_works) {
- if (ipl_info.type == IPL_TYPE_FCP)
+ if (ipl_info.type == IPL_TYPE_FCP) {
make_attrs_ro(reipl_fcp_attrs);
- else
+ sys_reipl_fcp_scp_data_attr.attr.mode = S_IRUGO;
+ } else
return 0;
}
reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
if (!reipl_block_fcp)
return -ENOMEM;
- rc = sysfs_create_group(&reipl_kset->kobj, &reipl_fcp_attr_group);
+
+ /* sysfs: create fcp kset for mixing attr group and bin attrs */
+ reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
+ &reipl_kset->kobj);
+ if (!reipl_kset) {
+ free_page((unsigned long) reipl_block_fcp);
+ return -ENOMEM;
+ }
+
+ rc = sysfs_create_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
if (rc) {
- free_page((unsigned long)reipl_block_fcp);
+ kset_unregister(reipl_fcp_kset);
+ free_page((unsigned long) reipl_block_fcp);
return rc;
}
- if (ipl_info.type == IPL_TYPE_FCP) {
+
+ rc = sysfs_create_bin_file(&reipl_fcp_kset->kobj,
+ &sys_reipl_fcp_scp_data_attr);
+ if (rc) {
+ sysfs_remove_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
+ kset_unregister(reipl_fcp_kset);
+ free_page((unsigned long) reipl_block_fcp);
+ return rc;
+ }
+
+ if (ipl_info.type == IPL_TYPE_FCP)
memcpy(reipl_block_fcp, IPL_PARMBLOCK_START, PAGE_SIZE);
- } else {
+ else {
reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN;
reipl_block_fcp->hdr.version = IPL_PARM_BLOCK_VERSION;
reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN;
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 2a0a5e9..dfe015d 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -11,111 +11,27 @@
ftrace_stub:
br %r14
-#ifdef CONFIG_64BIT
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
.globl _mcount
_mcount:
- br %r14
-
- .globl ftrace_caller
-ftrace_caller:
- larl %r1,function_trace_stop
- icm %r1,0xf,0(%r1)
- bnzr %r14
- stmg %r2,%r5,32(%r15)
- stg %r14,112(%r15)
- lgr %r1,%r15
- aghi %r15,-160
- stg %r1,__SF_BACKCHAIN(%r15)
- lgr %r2,%r14
- lg %r3,168(%r15)
- larl %r14,ftrace_dyn_func
- lg %r14,0(%r14)
- basr %r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- .globl ftrace_graph_caller
-ftrace_graph_caller:
- # This unconditional branch gets runtime patched. Change only if
- # you know what you are doing. See ftrace_enable_graph_caller().
- j 0f
- lg %r2,272(%r15)
- lg %r3,168(%r15)
- brasl %r14,prepare_ftrace_return
- stg %r2,168(%r15)
-0:
-#endif
- aghi %r15,160
- lmg %r2,%r5,32(%r15)
- lg %r14,112(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
br %r14
.data
.globl ftrace_dyn_func
ftrace_dyn_func:
- .quad ftrace_stub
+ .long ftrace_stub
.previous
-#else /* CONFIG_DYNAMIC_FTRACE */
-
- .globl _mcount
-_mcount:
- larl %r1,function_trace_stop
- icm %r1,0xf,0(%r1)
- bnzr %r14
- stmg %r2,%r5,32(%r15)
- stg %r14,112(%r15)
- lgr %r1,%r15
- aghi %r15,-160
- stg %r1,__SF_BACKCHAIN(%r15)
- lgr %r2,%r14
- lg %r3,168(%r15)
- larl %r14,ftrace_trace_function
- lg %r14,0(%r14)
- basr %r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- lg %r2,272(%r15)
- lg %r3,168(%r15)
- brasl %r14,prepare_ftrace_return
- stg %r2,168(%r15)
-#endif
- aghi %r15,160
- lmg %r2,%r5,32(%r15)
- lg %r14,112(%r15)
- br %r14
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
- .globl return_to_handler
-return_to_handler:
- stmg %r2,%r5,32(%r15)
- lgr %r1,%r15
- aghi %r15,-160
- stg %r1,__SF_BACKCHAIN(%r15)
- brasl %r14,ftrace_return_to_handler
- aghi %r15,160
- lgr %r14,%r2
- lmg %r2,%r5,32(%r15)
- br %r14
-
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#else /* CONFIG_64BIT */
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
- .globl _mcount
-_mcount:
- br %r14
-
.globl ftrace_caller
ftrace_caller:
+#endif
stm %r2,%r5,16(%r15)
bras %r1,2f
+#ifdef CONFIG_DYNAMIC_FTRACE
+0: .long ftrace_dyn_func
+#else
0: .long ftrace_trace_function
+#endif
1: .long function_trace_stop
2: l %r2,1b-0b(%r1)
icm %r2,0xf,0(%r2)
@@ -131,11 +47,13 @@
l %r14,0(%r14)
basr %r14,%r14
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
.globl ftrace_graph_caller
ftrace_graph_caller:
# This unconditional branch gets runtime patched. Change only if
# you know what you are doing. See ftrace_enable_graph_caller().
j 1f
+#endif
bras %r1,0f
.long prepare_ftrace_return
0: l %r2,152(%r15)
@@ -150,49 +68,6 @@
3: lm %r2,%r5,16(%r15)
br %r14
- .data
- .globl ftrace_dyn_func
-ftrace_dyn_func:
- .long ftrace_stub
- .previous
-
-#else /* CONFIG_DYNAMIC_FTRACE */
-
- .globl _mcount
-_mcount:
- stm %r2,%r5,16(%r15)
- bras %r1,2f
-0: .long ftrace_trace_function
-1: .long function_trace_stop
-2: l %r2,1b-0b(%r1)
- icm %r2,0xf,0(%r2)
- jnz 3f
- st %r14,56(%r15)
- lr %r0,%r15
- ahi %r15,-96
- l %r3,100(%r15)
- la %r2,0(%r14)
- st %r0,__SF_BACKCHAIN(%r15)
- la %r3,0(%r3)
- l %r14,0b-0b(%r1)
- l %r14,0(%r14)
- basr %r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- bras %r1,0f
- .long prepare_ftrace_return
-0: l %r2,152(%r15)
- l %r4,0(%r1)
- l %r3,100(%r15)
- basr %r14,%r4
- st %r2,100(%r15)
-#endif
- ahi %r15,96
- l %r14,56(%r15)
-3: lm %r2,%r5,16(%r15)
- br %r14
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl return_to_handler
@@ -211,6 +86,4 @@
lm %r2,%r5,16(%r15)
br %r14
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#endif /* CONFIG_64BIT */
+#endif
diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S
new file mode 100644
index 0000000..c37211c
--- /dev/null
+++ b/arch/s390/kernel/mcount64.S
@@ -0,0 +1,78 @@
+/*
+ * Copyright IBM Corp. 2008,2009
+ *
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <asm/asm-offsets.h>
+
+ .globl ftrace_stub
+ftrace_stub:
+ br %r14
+
+ .globl _mcount
+_mcount:
+#ifdef CONFIG_DYNAMIC_FTRACE
+ br %r14
+
+ .data
+ .globl ftrace_dyn_func
+ftrace_dyn_func:
+ .quad ftrace_stub
+ .previous
+
+ .globl ftrace_caller
+ftrace_caller:
+#endif
+ larl %r1,function_trace_stop
+ icm %r1,0xf,0(%r1)
+ bnzr %r14
+ stmg %r2,%r5,32(%r15)
+ stg %r14,112(%r15)
+ lgr %r1,%r15
+ aghi %r15,-160
+ stg %r1,__SF_BACKCHAIN(%r15)
+ lgr %r2,%r14
+ lg %r3,168(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ larl %r14,ftrace_dyn_func
+#else
+ larl %r14,ftrace_trace_function
+#endif
+ lg %r14,0(%r14)
+ basr %r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+ .globl ftrace_graph_caller
+ftrace_graph_caller:
+ # This unconditional branch gets runtime patched. Change only if
+ # you know what you are doing. See ftrace_enable_graph_caller().
+ j 0f
+#endif
+ lg %r2,272(%r15)
+ lg %r3,168(%r15)
+ brasl %r14,prepare_ftrace_return
+ stg %r2,168(%r15)
+0:
+#endif
+ aghi %r15,160
+ lmg %r2,%r5,32(%r15)
+ lg %r14,112(%r15)
+ br %r14
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+ .globl return_to_handler
+return_to_handler:
+ stmg %r2,%r5,32(%r15)
+ lgr %r1,%r15
+ aghi %r15,-160
+ stg %r1,__SF_BACKCHAIN(%r15)
+ brasl %r14,ftrace_return_to_handler
+ aghi %r15,160
+ lgr %r14,%r2
+ lmg %r2,%r5,32(%r15)
+ br %r14
+
+#endif
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 43acd73..f3ddd7a 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -51,6 +51,9 @@
#include "compat_ptrace.h"
#endif
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
enum s390_regset {
REGSET_GENERAL,
REGSET_FP,
@@ -661,8 +664,8 @@
ret = -1;
}
- if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
- ftrace_syscall_enter(regs);
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_enter(regs, regs->gprs[2]);
if (unlikely(current->audit_context))
audit_syscall_entry(is_compat_task() ?
@@ -679,8 +682,8 @@
audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]),
regs->gprs[2]);
- if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
- ftrace_syscall_exit(regs);
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_exit(regs, regs->gprs[2]);
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(regs, 0);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9717717..9ed13a1 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -154,6 +154,16 @@
__setup("condev=", condev_setup);
+static void __init set_preferred_console(void)
+{
+ if (MACHINE_IS_KVM)
+ add_preferred_console("hvc", 0, NULL);
+ else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+ add_preferred_console("ttyS", 0, NULL);
+ else if (CONSOLE_IS_3270)
+ add_preferred_console("tty3270", 0, NULL);
+}
+
static int __init conmode_setup(char *str)
{
#if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
@@ -168,6 +178,7 @@
if (strncmp(str, "3270", 5) == 0)
SET_CONSOLE_3270;
#endif
+ set_preferred_console();
return 1;
}
@@ -780,9 +791,6 @@
void __init
setup_arch(char **cmdline_p)
{
- /* set up preferred console */
- add_preferred_console("ttyS", 0, NULL);
-
/*
* print what head.S has found out about the machine
*/
@@ -802,11 +810,9 @@
if (MACHINE_IS_VM)
pr_info("Linux is running as a z/VM "
"guest operating system in 64-bit mode\n");
- else if (MACHINE_IS_KVM) {
+ else if (MACHINE_IS_KVM)
pr_info("Linux is running under KVM in 64-bit mode\n");
- add_preferred_console("hvc", 0, NULL);
- s390_virtio_console_init();
- } else
+ else
pr_info("Linux is running natively in 64-bit mode\n");
#endif /* CONFIG_64BIT */
@@ -851,6 +857,7 @@
/* Setup default console */
conmode_default();
+ set_preferred_console();
/* Setup zfcpdump support */
setup_zfcpdump(console_devno);
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 062bd64..6b4fef8 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -536,4 +536,6 @@
{
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index be2cae0..56c1687 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -49,6 +49,7 @@
#include <asm/sclp.h>
#include <asm/cputime.h>
#include <asm/vdso.h>
+#include <asm/cpu.h>
#include "entry.h"
static struct task_struct *current_set[NR_CPUS];
@@ -70,6 +71,23 @@
static void smp_ext_bitcall(int, ec_bit_sig);
+static int cpu_stopped(int cpu)
+{
+ __u32 status;
+
+ switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+ case sigp_order_code_accepted:
+ case sigp_status_stored:
+ /* Check for stopped and check stop state */
+ if (status & 0x50)
+ return 1;
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
void smp_send_stop(void)
{
int cpu, rc;
@@ -86,7 +104,7 @@
rc = signal_processor(cpu, sigp_stop);
} while (rc == sigp_busy);
- while (!smp_cpu_not_running(cpu))
+ while (!cpu_stopped(cpu))
cpu_relax();
}
}
@@ -269,19 +287,6 @@
#endif /* CONFIG_ZFCPDUMP */
-static int cpu_stopped(int cpu)
-{
- __u32 status;
-
- /* Check for stopped state */
- if (signal_processor_ps(&status, 0, cpu, sigp_sense) ==
- sigp_status_stored) {
- if (status & 0x40)
- return 1;
- }
- return 0;
-}
-
static int cpu_known(int cpu_id)
{
int cpu;
@@ -300,7 +305,7 @@
logical_cpu = cpumask_first(&avail);
if (logical_cpu >= nr_cpu_ids)
return 0;
- for (cpu_id = 0; cpu_id <= 65535; cpu_id++) {
+ for (cpu_id = 0; cpu_id <= MAX_CPU_ADDRESS; cpu_id++) {
if (cpu_known(cpu_id))
continue;
__cpu_logical_map[logical_cpu] = cpu_id;
@@ -379,7 +384,7 @@
/* Use sigp detection algorithm if sclp doesn't work. */
if (sclp_get_cpu_info(info)) {
smp_use_sigp_detection = 1;
- for (cpu = 0; cpu <= 65535; cpu++) {
+ for (cpu = 0; cpu <= MAX_CPU_ADDRESS; cpu++) {
if (cpu == boot_cpu_addr)
continue;
__cpu_logical_map[CPU_INIT_NO] = cpu;
@@ -635,7 +640,7 @@
void __cpu_die(unsigned int cpu)
{
/* Wait until target cpu is down */
- while (!smp_cpu_not_running(cpu))
+ while (!cpu_stopped(cpu))
cpu_relax();
smp_free_lowcore(cpu);
pr_info("Processor %d stopped\n", cpu);
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
new file mode 100644
index 0000000..086bee9
--- /dev/null
+++ b/arch/s390/kernel/suspend.c
@@ -0,0 +1,73 @@
+/*
+ * Suspend support specific for s390.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ */
+
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/ipl.h>
+
+/*
+ * References to section boundaries
+ */
+extern const void __nosave_begin, __nosave_end;
+
+/*
+ * check if given pfn is in the 'nosave' or in the read only NSS section
+ */
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
+ >> PAGE_SHIFT;
+ unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+ unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+
+ if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
+ return 1;
+ if (pfn >= stext_pfn && pfn <= eshared_pfn) {
+ if (ipl_info.type == IPL_TYPE_NSS)
+ return 1;
+ } else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+ return 1;
+ return 0;
+}
+
+void save_processor_state(void)
+{
+ /* swsusp_arch_suspend() actually saves all cpu register contents.
+ * Machine checks must be disabled since swsusp_arch_suspend() stores
+ * register contents to their lowcore save areas. That's the same
+ * place where register contents on machine checks would be saved.
+ * To avoid register corruption disable machine checks.
+ * We must also disable machine checks in the new psw mask for
+ * program checks, since swsusp_arch_suspend() may generate program
+ * checks. Disabling machine checks for all other new psw masks is
+ * just paranoia.
+ */
+ local_mcck_disable();
+ /* Disable lowcore protection */
+ __ctl_clear_bit(0,28);
+ S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
+}
+
+void restore_processor_state(void)
+{
+ S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+ /* Enable lowcore protection */
+ __ctl_set_bit(0,28);
+ local_mcck_enable();
+}
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
new file mode 100644
index 0000000..7cd6b09
--- /dev/null
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -0,0 +1,184 @@
+/*
+ * S390 64-bit swsusp implementation
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ * Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save register context in absolute 0 lowcore and call swsusp_save() to
+ * create in-memory kernel image. The context is saved in the designated
+ * "store status" memory locations (see POP).
+ * We return from this function twice. The first time during the suspend to
+ * disk process. The second time via the swsusp_arch_resume() function
+ * (see below) in the resume process.
+ * This function runs with disabled interrupts.
+ */
+ .section .text
+ .align 4
+ .globl swsusp_arch_suspend
+swsusp_arch_suspend:
+ stmg %r6,%r15,__SF_GPRS(%r15)
+ lgr %r1,%r15
+ aghi %r15,-STACK_FRAME_OVERHEAD
+ stg %r1,__SF_BACKCHAIN(%r15)
+
+ /* Deactivate DAT */
+ stnsm __SF_EMPTY(%r15),0xfb
+
+ /* Store prefix register on stack */
+ stpx __SF_EMPTY(%r15)
+
+ /* Save prefix register contents for lowcore */
+ llgf %r4,__SF_EMPTY(%r15)
+
+ /* Get pointer to save area */
+ lghi %r1,0x1000
+
+ /* Store registers */
+ mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */
+ stfpc 0x31c(%r1) /* store fpu control */
+ std 0,0x200(%r1) /* store f0 */
+ std 1,0x208(%r1) /* store f1 */
+ std 2,0x210(%r1) /* store f2 */
+ std 3,0x218(%r1) /* store f3 */
+ std 4,0x220(%r1) /* store f4 */
+ std 5,0x228(%r1) /* store f5 */
+ std 6,0x230(%r1) /* store f6 */
+ std 7,0x238(%r1) /* store f7 */
+ std 8,0x240(%r1) /* store f8 */
+ std 9,0x248(%r1) /* store f9 */
+ std 10,0x250(%r1) /* store f10 */
+ std 11,0x258(%r1) /* store f11 */
+ std 12,0x260(%r1) /* store f12 */
+ std 13,0x268(%r1) /* store f13 */
+ std 14,0x270(%r1) /* store f14 */
+ std 15,0x278(%r1) /* store f15 */
+ stam %a0,%a15,0x340(%r1) /* store access registers */
+ stctg %c0,%c15,0x380(%r1) /* store control registers */
+ stmg %r0,%r15,0x280(%r1) /* store general registers */
+
+ stpt 0x328(%r1) /* store timer */
+ stckc 0x330(%r1) /* store clock comparator */
+
+ /* Activate DAT */
+ stosm __SF_EMPTY(%r15),0x04
+
+ /* Set prefix page to zero */
+ xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+ spx __SF_EMPTY(%r15)
+
+ lghi %r2,0
+ lghi %r3,2*PAGE_SIZE
+ lghi %r5,2*PAGE_SIZE
+1: mvcle %r2,%r4,0
+ jo 1b
+
+ /* Save image */
+ brasl %r14,swsusp_save
+
+ /* Restore prefix register and return */
+ lghi %r1,0x1000
+ spx 0x318(%r1)
+ lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+ lghi %r2,0
+ br %r14
+
+/*
+ * Restore saved memory image to correct place and restore register context.
+ * Then we return to the function that called swsusp_arch_suspend().
+ * swsusp_arch_resume() runs with disabled interrupts.
+ */
+ .globl swsusp_arch_resume
+swsusp_arch_resume:
+ stmg %r6,%r15,__SF_GPRS(%r15)
+ lgr %r1,%r15
+ aghi %r15,-STACK_FRAME_OVERHEAD
+ stg %r1,__SF_BACKCHAIN(%r15)
+
+#ifdef CONFIG_SMP
+ /* Save boot cpu number */
+ brasl %r14,smp_get_phys_cpu_id
+ lgr %r10,%r2
+#endif
+ /* Deactivate DAT */
+ stnsm __SF_EMPTY(%r15),0xfb
+
+ /* Set prefix page to zero */
+ xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+ spx __SF_EMPTY(%r15)
+
+ /* Restore saved image */
+ larl %r1,restore_pblist
+ lg %r1,0(%r1)
+ ltgr %r1,%r1
+ jz 2f
+0:
+ lg %r2,8(%r1)
+ lg %r4,0(%r1)
+ lghi %r3,PAGE_SIZE
+ lghi %r5,PAGE_SIZE
+1:
+ mvcle %r2,%r4,0
+ jo 1b
+ lg %r1,16(%r1)
+ ltgr %r1,%r1
+ jnz 0b
+2:
+ ptlb /* flush tlb */
+
+ /* Restore registers */
+ lghi %r13,0x1000 /* %r1 = pointer to save arae */
+
+ spt 0x328(%r13) /* reprogram timer */
+ //sckc 0x330(%r13) /* set clock comparator */
+
+ lctlg %c0,%c15,0x380(%r13) /* load control registers */
+ lam %a0,%a15,0x340(%r13) /* load access registers */
+
+ lfpc 0x31c(%r13) /* load fpu control */
+ ld 0,0x200(%r13) /* load f0 */
+ ld 1,0x208(%r13) /* load f1 */
+ ld 2,0x210(%r13) /* load f2 */
+ ld 3,0x218(%r13) /* load f3 */
+ ld 4,0x220(%r13) /* load f4 */
+ ld 5,0x228(%r13) /* load f5 */
+ ld 6,0x230(%r13) /* load f6 */
+ ld 7,0x238(%r13) /* load f7 */
+ ld 8,0x240(%r13) /* load f8 */
+ ld 9,0x248(%r13) /* load f9 */
+ ld 10,0x250(%r13) /* load f10 */
+ ld 11,0x258(%r13) /* load f11 */
+ ld 12,0x260(%r13) /* load f12 */
+ ld 13,0x268(%r13) /* load f13 */
+ ld 14,0x270(%r13) /* load f14 */
+ ld 15,0x278(%r13) /* load f15 */
+
+ /* Load old stack */
+ lg %r15,0x2f8(%r13)
+
+ /* Pointer to save area */
+ lghi %r13,0x1000
+
+#ifdef CONFIG_SMP
+ /* Switch CPUs */
+ lgr %r2,%r10 /* get cpu id */
+ llgf %r3,0x318(%r13)
+ brasl %r14,smp_switch_boot_cpu_in_resume
+#endif
+ /* Restore prefix register */
+ spx 0x318(%r13)
+
+ /* Activate DAT */
+ stosm __SF_EMPTY(%r15),0x04
+
+ /* Return 0 */
+ lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+ lghi %r2,0
+ br %r14
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 9693d98..e3dc28b 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -60,6 +60,7 @@
#define TICK_SIZE tick
u64 sched_clock_base_cc = -1; /* Force to data section. */
+EXPORT_SYMBOL_GPL(sched_clock_base_cc);
static DEFINE_PER_CPU(struct clock_event_device, comparators);
@@ -68,7 +69,7 @@
*/
unsigned long long notrace sched_clock(void)
{
- return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
+ return (get_clock_monotonic() * 125) >> 9;
}
/*
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index a53db23..7315f9e 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -52,55 +52,18 @@
. = ALIGN(PAGE_SIZE);
_eshared = .; /* End of shareable data */
- . = ALIGN(16); /* Exception table */
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :data
+ EXCEPTION_TABLE(16) :data
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
- }
+ RW_DATA_SECTION(0x100, PAGE_SIZE, THREAD_SIZE)
- . = ALIGN(PAGE_SIZE);
- .data_nosave : {
- __nosave_begin = .;
- *(.data.nosave)
- }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.idt)
- }
-
- . = ALIGN(0x100);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
- . = ALIGN(0x100);
- .data.read_mostly : {
- *(.data.read_mostly)
- }
_edata = .; /* End of data section */
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : {
- *(.data.init_task)
- }
-
/* will be freed after init */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+
+ INIT_TEXT_SECTION(PAGE_SIZE)
+
/*
* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
@@ -111,49 +74,13 @@
/* early.c uses stsi, which requires page aligned data. */
. = ALIGN(PAGE_SIZE);
- .init.data : {
- INIT_DATA
- }
- . = ALIGN(0x100);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(0x100);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- . = ALIGN(2);
- __initramfs_end = .;
- }
-#endif
+ INIT_DATA_SECTION(0x100)
PERCPU(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
__init_end = .; /* freed after init ends here */
- /* BSS */
- .bss : {
- __bss_start = .;
- *(.bss)
- . = ALIGN(2);
- __bss_stop = .;
- }
+ BSS_SECTION(0, 2, 0)
_end = . ;
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 3e260b7..bf164fc 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -1,11 +1,7 @@
#
# KVM configuration
#
-config HAVE_KVM
- bool
-
-config HAVE_KVM_IRQCHIP
- bool
+source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
@@ -38,9 +34,6 @@
If unsure, say N.
-config KVM_TRACE
- bool
-
# OK, it's a little counter-intuitive to do this, but it puts it neatly under
# the virtualization menu.
source drivers/virtio/Kconfig
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index ed60f3a..03c716a 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -1,7 +1,7 @@
/*
* gaccess.h - access guest memory
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -16,13 +16,14 @@
#include <linux/compiler.h>
#include <linux/kvm_host.h>
#include <asm/uaccess.h>
+#include "kvm-s390.h"
static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
unsigned long guestaddr)
{
unsigned long prefix = vcpu->arch.sie_block->prefix;
- unsigned long origin = vcpu->kvm->arch.guest_origin;
- unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+ unsigned long origin = vcpu->arch.sie_block->gmsor;
+ unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
if (guestaddr < 2 * PAGE_SIZE)
guestaddr += prefix;
@@ -158,8 +159,8 @@
const void *from, unsigned long n)
{
unsigned long prefix = vcpu->arch.sie_block->prefix;
- unsigned long origin = vcpu->kvm->arch.guest_origin;
- unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+ unsigned long origin = vcpu->arch.sie_block->gmsor;
+ unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
goto slowpath;
@@ -209,8 +210,8 @@
unsigned long guestsrc, unsigned long n)
{
unsigned long prefix = vcpu->arch.sie_block->prefix;
- unsigned long origin = vcpu->kvm->arch.guest_origin;
- unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+ unsigned long origin = vcpu->arch.sie_block->gmsor;
+ unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
goto slowpath;
@@ -244,8 +245,8 @@
unsigned long guestdest,
const void *from, unsigned long n)
{
- unsigned long origin = vcpu->kvm->arch.guest_origin;
- unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+ unsigned long origin = vcpu->arch.sie_block->gmsor;
+ unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
if (guestdest + n > memsize)
return -EFAULT;
@@ -262,8 +263,8 @@
unsigned long guestsrc,
unsigned long n)
{
- unsigned long origin = vcpu->kvm->arch.guest_origin;
- unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+ unsigned long origin = vcpu->arch.sie_block->gmsor;
+ unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
if (guestsrc + n > memsize)
return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 98997cc..ba9d8a7 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -1,7 +1,7 @@
/*
* intercept.c - in-kernel handling for sie intercepts
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -128,7 +128,7 @@
static int handle_stop(struct kvm_vcpu *vcpu)
{
- int rc;
+ int rc = 0;
vcpu->stat.exit_stop_request++;
atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -141,12 +141,18 @@
rc = -ENOTSUPP;
}
+ if (vcpu->arch.local_int.action_bits & ACTION_RELOADVCPU_ON_STOP) {
+ vcpu->arch.local_int.action_bits &= ~ACTION_RELOADVCPU_ON_STOP;
+ rc = SIE_INTERCEPT_RERUNVCPU;
+ vcpu->run->exit_reason = KVM_EXIT_INTR;
+ }
+
if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
rc = -ENOTSUPP;
- } else
- rc = 0;
+ }
+
spin_unlock_bh(&vcpu->arch.local_int.lock);
return rc;
}
@@ -158,9 +164,9 @@
vcpu->stat.exit_validity++;
if ((viwhy == 0x37) && (vcpu->arch.sie_block->prefix
- <= vcpu->kvm->arch.guest_memsize - 2*PAGE_SIZE)){
+ <= kvm_s390_vcpu_get_memsize(vcpu) - 2*PAGE_SIZE)) {
rc = fault_in_pages_writeable((char __user *)
- vcpu->kvm->arch.guest_origin +
+ vcpu->arch.sie_block->gmsor +
vcpu->arch.sie_block->prefix,
2*PAGE_SIZE);
if (rc)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 4d61341..2c2f983 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -283,7 +283,7 @@
return 1;
}
-int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
+static int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
{
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
@@ -320,12 +320,6 @@
return rc;
}
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
- /* do real check here */
- return 1;
-}
-
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return 0;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 90d9d1b..07ced89 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1,7 +1,7 @@
/*
* s390host.c -- hosting zSeries kernel virtual machines
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -10,6 +10,7 @@
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Christian Borntraeger <borntraeger@de.ibm.com>
* Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>
*/
#include <linux/compiler.h>
@@ -210,13 +211,17 @@
static void kvm_free_vcpus(struct kvm *kvm)
{
unsigned int i;
+ struct kvm_vcpu *vcpu;
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- if (kvm->vcpus[i]) {
- kvm_arch_vcpu_destroy(kvm->vcpus[i]);
- kvm->vcpus[i] = NULL;
- }
- }
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ kvm_arch_vcpu_destroy(vcpu);
+
+ mutex_lock(&kvm->lock);
+ for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+ kvm->vcpus[i] = NULL;
+
+ atomic_set(&kvm->online_vcpus, 0);
+ mutex_unlock(&kvm->lock);
}
void kvm_arch_sync_events(struct kvm *kvm)
@@ -278,16 +283,10 @@
vcpu->arch.sie_block->gbea = 1;
}
-/* The current code can have up to 256 pages for virtio */
-#define VIRTIODESCSPACE (256ul * 4096ul)
-
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
- vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
- vcpu->kvm->arch.guest_origin +
- VIRTIODESCSPACE - 1ul;
- vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
+ set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests);
vcpu->arch.sie_block->ecb = 2;
vcpu->arch.sie_block->eca = 0xC1002001U;
vcpu->arch.sie_block->fac = (int) (long) facilities;
@@ -319,8 +318,6 @@
BUG_ON(!kvm->arch.sca);
if (!kvm->arch.sca->cpu[id].sda)
kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block;
- else
- BUG_ON(!kvm->vcpus[id]); /* vcpu does already exist */
vcpu->arch.sie_block->scaoh = (__u32)(((__u64)kvm->arch.sca) >> 32);
vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
@@ -490,9 +487,15 @@
vcpu_load(vcpu);
+rerun_vcpu:
+ if (vcpu->requests)
+ if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
+ kvm_s390_vcpu_set_mem(vcpu);
+
/* verify, that memory has been registered */
- if (!vcpu->kvm->arch.guest_memsize) {
+ if (!vcpu->arch.sie_block->gmslm) {
vcpu_put(vcpu);
+ VCPU_EVENT(vcpu, 3, "%s", "no memory registered to run vcpu");
return -EINVAL;
}
@@ -509,6 +512,7 @@
vcpu->arch.sie_block->gpsw.addr = kvm_run->s390_sieic.addr;
break;
case KVM_EXIT_UNKNOWN:
+ case KVM_EXIT_INTR:
case KVM_EXIT_S390_RESET:
break;
default:
@@ -522,8 +526,13 @@
rc = kvm_handle_sie_intercept(vcpu);
} while (!signal_pending(current) && !rc);
- if (signal_pending(current) && !rc)
+ if (rc == SIE_INTERCEPT_RERUNVCPU)
+ goto rerun_vcpu;
+
+ if (signal_pending(current) && !rc) {
+ kvm_run->exit_reason = KVM_EXIT_INTR;
rc = -EINTR;
+ }
if (rc == -ENOTSUPP) {
/* intercept cannot be handled in-kernel, prepare kvm-run */
@@ -676,6 +685,7 @@
int user_alloc)
{
int i;
+ struct kvm_vcpu *vcpu;
/* A few sanity checks. We can have exactly one memory slot which has
to start at guest virtual zero and which has to be located at a
@@ -684,7 +694,7 @@
vmas. It is okay to mmap() and munmap() stuff in this slot after
doing this call at any time */
- if (mem->slot || kvm->arch.guest_memsize)
+ if (mem->slot)
return -EINVAL;
if (mem->guest_phys_addr)
@@ -699,36 +709,14 @@
if (!user_alloc)
return -EINVAL;
- /* lock all vcpus */
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- if (!kvm->vcpus[i])
+ /* request update of sie control block for all available vcpus */
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (test_and_set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
continue;
- if (!mutex_trylock(&kvm->vcpus[i]->mutex))
- goto fail_out;
- }
-
- kvm->arch.guest_origin = mem->userspace_addr;
- kvm->arch.guest_memsize = mem->memory_size;
-
- /* update sie control blocks, and unlock all vcpus */
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- if (kvm->vcpus[i]) {
- kvm->vcpus[i]->arch.sie_block->gmsor =
- kvm->arch.guest_origin;
- kvm->vcpus[i]->arch.sie_block->gmslm =
- kvm->arch.guest_memsize +
- kvm->arch.guest_origin +
- VIRTIODESCSPACE - 1ul;
- mutex_unlock(&kvm->vcpus[i]->mutex);
- }
+ kvm_s390_inject_sigp_stop(vcpu, ACTION_RELOADVCPU_ON_STOP);
}
return 0;
-
-fail_out:
- for (; i >= 0; i--)
- mutex_unlock(&kvm->vcpus[i]->mutex);
- return -EINVAL;
}
void kvm_arch_flush_shadow(struct kvm *kvm)
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 748fee8..ec5eee7 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -1,7 +1,7 @@
/*
* kvm_s390.h - definition for kvm on s390
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -9,6 +9,7 @@
*
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Christian Borntraeger <borntraeger@de.ibm.com>
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>
*/
#ifndef ARCH_S390_KVM_S390_H
@@ -18,8 +19,13 @@
#include <linux/kvm.h>
#include <linux/kvm_host.h>
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
+/* negativ values are error codes, positive values for internal conditions */
+#define SIE_INTERCEPT_RERUNVCPU (1<<0)
int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu);
#define VM_EVENT(d_kvm, d_loglevel, d_string, d_args...)\
@@ -50,6 +56,30 @@
int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
struct kvm_s390_interrupt *s390int);
int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
+int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
+
+static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.sie_block->gmslm
+ - vcpu->arch.sie_block->gmsor
+ - VIRTIODESCSPACE + 1ul;
+}
+
+static inline void kvm_s390_vcpu_set_mem(struct kvm_vcpu *vcpu)
+{
+ struct kvm_memory_slot *mem;
+
+ down_read(&vcpu->kvm->slots_lock);
+ mem = &vcpu->kvm->memslots[0];
+
+ vcpu->arch.sie_block->gmsor = mem->userspace_addr;
+ vcpu->arch.sie_block->gmslm =
+ mem->userspace_addr +
+ (mem->npages << PAGE_SHIFT) +
+ VIRTIODESCSPACE - 1ul;
+
+ up_read(&vcpu->kvm->slots_lock);
+}
/* implemented in priv.c */
int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0ef81d6..40c8c67 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -1,7 +1,7 @@
/*
* sigp.c - handlinge interprocessor communication
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
@@ -9,6 +9,7 @@
*
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Christian Borntraeger <borntraeger@de.ibm.com>
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>
*/
#include <linux/kvm.h>
@@ -107,46 +108,57 @@
return rc;
}
-static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
+static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action)
+{
+ struct kvm_s390_interrupt_info *inti;
+
+ inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+ if (!inti)
+ return -ENOMEM;
+ inti->type = KVM_S390_SIGP_STOP;
+
+ spin_lock_bh(&li->lock);
+ list_add_tail(&inti->list, &li->list);
+ atomic_set(&li->active, 1);
+ atomic_set_mask(CPUSTAT_STOP_INT, li->cpuflags);
+ li->action_bits |= action;
+ if (waitqueue_active(&li->wq))
+ wake_up_interruptible(&li->wq);
+ spin_unlock_bh(&li->lock);
+
+ return 0; /* order accepted */
+}
+
+static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int action)
{
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
struct kvm_s390_local_interrupt *li;
- struct kvm_s390_interrupt_info *inti;
int rc;
if (cpu_addr >= KVM_MAX_VCPUS)
return 3; /* not operational */
- inti = kzalloc(sizeof(*inti), GFP_KERNEL);
- if (!inti)
- return -ENOMEM;
-
- inti->type = KVM_S390_SIGP_STOP;
-
spin_lock(&fi->lock);
li = fi->local_int[cpu_addr];
if (li == NULL) {
rc = 3; /* not operational */
- kfree(inti);
goto unlock;
}
- spin_lock_bh(&li->lock);
- list_add_tail(&inti->list, &li->list);
- atomic_set(&li->active, 1);
- atomic_set_mask(CPUSTAT_STOP_INT, li->cpuflags);
- if (store)
- li->action_bits |= ACTION_STORE_ON_STOP;
- li->action_bits |= ACTION_STOP_ON_STOP;
- if (waitqueue_active(&li->wq))
- wake_up_interruptible(&li->wq);
- spin_unlock_bh(&li->lock);
- rc = 0; /* order accepted */
+
+ rc = __inject_sigp_stop(li, action);
+
unlock:
spin_unlock(&fi->lock);
VCPU_EVENT(vcpu, 4, "sent sigp stop to cpu %x", cpu_addr);
return rc;
}
+int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action)
+{
+ struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+ return __inject_sigp_stop(li, action);
+}
+
static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
{
int rc;
@@ -177,9 +189,9 @@
/* make sure that the new value is valid memory */
address = address & 0x7fffe000u;
if ((copy_from_guest(vcpu, &tmp,
- (u64) (address + vcpu->kvm->arch.guest_origin) , 1)) ||
+ (u64) (address + vcpu->arch.sie_block->gmsor) , 1)) ||
(copy_from_guest(vcpu, &tmp, (u64) (address +
- vcpu->kvm->arch.guest_origin + PAGE_SIZE), 1))) {
+ vcpu->arch.sie_block->gmsor + PAGE_SIZE), 1))) {
*reg |= SIGP_STAT_INVALID_PARAMETER;
return 1; /* invalid parameter */
}
@@ -262,11 +274,11 @@
break;
case SIGP_STOP:
vcpu->stat.instruction_sigp_stop++;
- rc = __sigp_stop(vcpu, cpu_addr, 0);
+ rc = __sigp_stop(vcpu, cpu_addr, ACTION_STOP_ON_STOP);
break;
case SIGP_STOP_STORE_STATUS:
vcpu->stat.instruction_sigp_stop++;
- rc = __sigp_stop(vcpu, cpu_addr, 1);
+ rc = __sigp_stop(vcpu, cpu_addr, ACTION_STORE_ON_STOP);
break;
case SIGP_SET_ARCH:
vcpu->stat.instruction_sigp_arch++;
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index db05661..eec0544 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux s390-specific parts of the memory manager.
#
-obj-y := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
+obj-y := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o \
+ page-states.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PAGE_STATES) += page-states.o
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index e5e119f..1abbadd 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -10,6 +10,7 @@
* Copyright (C) 1995 Linus Torvalds
*/
+#include <linux/perf_counter.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -305,7 +306,7 @@
* interrupts again and then search the VMAs
*/
local_irq_enable();
-
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
down_read(&mm->mmap_sem);
si_code = SEGV_MAPERR;
@@ -363,11 +364,15 @@
}
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
-
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
/*
* The instruction that caused the program check will
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index fc0ad73..f92ec20 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -1,6 +1,4 @@
/*
- * arch/s390/mm/page-states.c
- *
* Copyright IBM Corp. 2008
*
* Guest page hinting for unused pages.
@@ -17,11 +15,12 @@
#define ESSA_SET_STABLE 1
#define ESSA_SET_UNUSED 2
-static int cmma_flag;
+static int cmma_flag = 1;
static int __init cmma(char *str)
{
char *parm;
+
parm = strstrip(str);
if (strcmp(parm, "yes") == 0 || strcmp(parm, "on") == 0) {
cmma_flag = 1;
@@ -32,7 +31,6 @@
return 1;
return 0;
}
-
__setup("cmma=", cmma);
void __init cmma_init(void)
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5656672..c702152 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -78,9 +78,9 @@
}
page->index = page_to_phys(shadow);
}
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
list_add(&page->lru, &mm->context.crst_list);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
return (unsigned long *) page_to_phys(page);
}
@@ -89,9 +89,9 @@
unsigned long *shadow = get_shadow_table(table);
struct page *page = virt_to_page(table);
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
list_del(&page->lru);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
if (shadow)
free_pages((unsigned long) shadow, ALLOC_ORDER);
free_pages((unsigned long) table, ALLOC_ORDER);
@@ -182,7 +182,7 @@
unsigned long bits;
bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
page = NULL;
if (!list_empty(&mm->context.pgtable_list)) {
page = list_first_entry(&mm->context.pgtable_list,
@@ -191,7 +191,7 @@
page = NULL;
}
if (!page) {
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
if (!page)
return NULL;
@@ -202,7 +202,7 @@
clear_table_pgstes(table);
else
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
list_add(&page->lru, &mm->context.pgtable_list);
}
table = (unsigned long *) page_to_phys(page);
@@ -213,7 +213,7 @@
page->flags |= bits;
if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
list_move_tail(&page->lru, &mm->context.pgtable_list);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
return table;
}
@@ -225,7 +225,7 @@
bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
page->flags ^= bits;
if (page->flags & FRAG_MASK) {
/* Page now has some free pgtable fragments. */
@@ -234,7 +234,7 @@
} else
/* All fragments of the 4K page have been freed. */
list_del(&page->lru);
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
if (page) {
pgtable_page_dtor(page);
__free_page(page);
@@ -245,7 +245,7 @@
{
struct page *page;
- spin_lock(&mm->page_table_lock);
+ spin_lock(&mm->context.list_lock);
/* Free shadow region and segment tables. */
list_for_each_entry(page, &mm->context.crst_list, lru)
if (page->index) {
@@ -255,7 +255,7 @@
/* "Free" second halves of page tables. */
list_for_each_entry(page, &mm->context.pgtable_list, lru)
page->flags &= ~SECOND_HALVES;
- spin_unlock(&mm->page_table_lock);
+ spin_unlock(&mm->context.list_lock);
mm->context.noexec = 0;
update_mm(mm, tsk);
}
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index e4868bf..5f91a38 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -331,6 +331,7 @@
unsigned long start, end;
int i;
+ spin_lock_init(&init_mm.context.list_lock);
INIT_LIST_HEAD(&init_mm.context.crst_list);
INIT_LIST_HEAD(&init_mm.context.pgtable_list);
init_mm.context.noexec = 0;
diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
deleted file mode 100644
index 973bb45..0000000
--- a/arch/s390/power/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for s390 PM support
-#
-
-obj-$(CONFIG_HIBERNATION) += suspend.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_HIBERNATION) += swsusp_64.o
-obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/suspend.c b/arch/s390/power/suspend.c
deleted file mode 100644
index b3351ec..0000000
--- a/arch/s390/power/suspend.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Suspend support specific for s390.
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- */
-
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/reboot.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-#include <asm/ipl.h>
-
-/*
- * References to section boundaries
- */
-extern const void __nosave_begin, __nosave_end;
-
-/*
- * check if given pfn is in the 'nosave' or in the read only NSS section
- */
-int pfn_is_nosave(unsigned long pfn)
-{
- unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
- unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
- >> PAGE_SHIFT;
- unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
- unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
-
- if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
- return 1;
- if (pfn >= stext_pfn && pfn <= eshared_pfn) {
- if (ipl_info.type == IPL_TYPE_NSS)
- return 1;
- } else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
- return 1;
- return 0;
-}
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
deleted file mode 100644
index bd1f5c6..0000000
--- a/arch/s390/power/swsusp.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-
-void save_processor_state(void)
-{
- /* swsusp_arch_suspend() actually saves all cpu register contents.
- * Machine checks must be disabled since swsusp_arch_suspend() stores
- * register contents to their lowcore save areas. That's the same
- * place where register contents on machine checks would be saved.
- * To avoid register corruption disable machine checks.
- * We must also disable machine checks in the new psw mask for
- * program checks, since swsusp_arch_suspend() may generate program
- * checks. Disabling machine checks for all other new psw masks is
- * just paranoia.
- */
- local_mcck_disable();
- /* Disable lowcore protection */
- __ctl_clear_bit(0,28);
- S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
- S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
- S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
- S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
-}
-
-void restore_processor_state(void)
-{
- S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
- S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
- S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
- S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
- /* Enable lowcore protection */
- __ctl_set_bit(0,28);
- local_mcck_enable();
-}
diff --git a/arch/s390/power/swsusp_64.c b/arch/s390/power/swsusp_64.c
deleted file mode 100644
index 9516a51..0000000
--- a/arch/s390/power/swsusp_64.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-#include <linux/interrupt.h>
-
-void do_after_copyback(void)
-{
- mb();
-}
-
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
deleted file mode 100644
index b26df5c..0000000
--- a/arch/s390/power/swsusp_asm64.S
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * S390 64-bit swsusp implementation
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- * Michael Holzheu <holzheu@linux.vnet.ibm.com>
- */
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-
-/*
- * Save register context in absolute 0 lowcore and call swsusp_save() to
- * create in-memory kernel image. The context is saved in the designated
- * "store status" memory locations (see POP).
- * We return from this function twice. The first time during the suspend to
- * disk process. The second time via the swsusp_arch_resume() function
- * (see below) in the resume process.
- * This function runs with disabled interrupts.
- */
- .section .text
- .align 2
- .globl swsusp_arch_suspend
-swsusp_arch_suspend:
- stmg %r6,%r15,__SF_GPRS(%r15)
- lgr %r1,%r15
- aghi %r15,-STACK_FRAME_OVERHEAD
- stg %r1,__SF_BACKCHAIN(%r15)
-
- /* Deactivate DAT */
- stnsm __SF_EMPTY(%r15),0xfb
-
- /* Store prefix register on stack */
- stpx __SF_EMPTY(%r15)
-
- /* Save prefix register contents for lowcore */
- llgf %r4,__SF_EMPTY(%r15)
-
- /* Get pointer to save area */
- lghi %r1,0x1000
-
- /* Store registers */
- mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */
- stfpc 0x31c(%r1) /* store fpu control */
- std 0,0x200(%r1) /* store f0 */
- std 1,0x208(%r1) /* store f1 */
- std 2,0x210(%r1) /* store f2 */
- std 3,0x218(%r1) /* store f3 */
- std 4,0x220(%r1) /* store f4 */
- std 5,0x228(%r1) /* store f5 */
- std 6,0x230(%r1) /* store f6 */
- std 7,0x238(%r1) /* store f7 */
- std 8,0x240(%r1) /* store f8 */
- std 9,0x248(%r1) /* store f9 */
- std 10,0x250(%r1) /* store f10 */
- std 11,0x258(%r1) /* store f11 */
- std 12,0x260(%r1) /* store f12 */
- std 13,0x268(%r1) /* store f13 */
- std 14,0x270(%r1) /* store f14 */
- std 15,0x278(%r1) /* store f15 */
- stam %a0,%a15,0x340(%r1) /* store access registers */
- stctg %c0,%c15,0x380(%r1) /* store control registers */
- stmg %r0,%r15,0x280(%r1) /* store general registers */
-
- stpt 0x328(%r1) /* store timer */
- stckc 0x330(%r1) /* store clock comparator */
-
- /* Activate DAT */
- stosm __SF_EMPTY(%r15),0x04
-
- /* Set prefix page to zero */
- xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
- spx __SF_EMPTY(%r15)
-
- lghi %r2,0
- lghi %r3,2*PAGE_SIZE
- lghi %r5,2*PAGE_SIZE
-1: mvcle %r2,%r4,0
- jo 1b
-
- /* Save image */
- brasl %r14,swsusp_save
-
- /* Restore prefix register and return */
- lghi %r1,0x1000
- spx 0x318(%r1)
- lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
- lghi %r2,0
- br %r14
-
-/*
- * Restore saved memory image to correct place and restore register context.
- * Then we return to the function that called swsusp_arch_suspend().
- * swsusp_arch_resume() runs with disabled interrupts.
- */
- .globl swsusp_arch_resume
-swsusp_arch_resume:
- stmg %r6,%r15,__SF_GPRS(%r15)
- lgr %r1,%r15
- aghi %r15,-STACK_FRAME_OVERHEAD
- stg %r1,__SF_BACKCHAIN(%r15)
-
-#ifdef CONFIG_SMP
- /* Save boot cpu number */
- brasl %r14,smp_get_phys_cpu_id
- lgr %r10,%r2
-#endif
- /* Deactivate DAT */
- stnsm __SF_EMPTY(%r15),0xfb
-
- /* Set prefix page to zero */
- xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
- spx __SF_EMPTY(%r15)
-
- /* Restore saved image */
- larl %r1,restore_pblist
- lg %r1,0(%r1)
- ltgr %r1,%r1
- jz 2f
-0:
- lg %r2,8(%r1)
- lg %r4,0(%r1)
- lghi %r3,PAGE_SIZE
- lghi %r5,PAGE_SIZE
-1:
- mvcle %r2,%r4,0
- jo 1b
- lg %r1,16(%r1)
- ltgr %r1,%r1
- jnz 0b
-2:
- ptlb /* flush tlb */
-
- /* Restore registers */
- lghi %r13,0x1000 /* %r1 = pointer to save arae */
-
- spt 0x328(%r13) /* reprogram timer */
- //sckc 0x330(%r13) /* set clock comparator */
-
- lctlg %c0,%c15,0x380(%r13) /* load control registers */
- lam %a0,%a15,0x340(%r13) /* load access registers */
-
- lfpc 0x31c(%r13) /* load fpu control */
- ld 0,0x200(%r13) /* load f0 */
- ld 1,0x208(%r13) /* load f1 */
- ld 2,0x210(%r13) /* load f2 */
- ld 3,0x218(%r13) /* load f3 */
- ld 4,0x220(%r13) /* load f4 */
- ld 5,0x228(%r13) /* load f5 */
- ld 6,0x230(%r13) /* load f6 */
- ld 7,0x238(%r13) /* load f7 */
- ld 8,0x240(%r13) /* load f8 */
- ld 9,0x248(%r13) /* load f9 */
- ld 10,0x250(%r13) /* load f10 */
- ld 11,0x258(%r13) /* load f11 */
- ld 12,0x260(%r13) /* load f12 */
- ld 13,0x268(%r13) /* load f13 */
- ld 14,0x270(%r13) /* load f14 */
- ld 15,0x278(%r13) /* load f15 */
-
- /* Load old stack */
- lg %r15,0x2f8(%r13)
-
- /* Pointer to save area */
- lghi %r13,0x1000
-
-#ifdef CONFIG_SMP
- /* Switch CPUs */
- lgr %r2,%r10 /* get cpu id */
- llgf %r3,0x318(%r13)
- brasl %r14,smp_switch_boot_cpu_in_resume
-#endif
- /* Restore prefix register */
- spx 0x318(%r13)
-
- /* Activate DAT */
- stosm __SF_EMPTY(%r15),0x04
-
- /* Return 0 */
- lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
- lghi %r2,0
- br %r14
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
index bb83258..acf9970 100644
--- a/arch/sh/include/asm/sh_eth.h
+++ b/arch/sh/include/asm/sh_eth.h
@@ -6,6 +6,9 @@
struct sh_eth_plat_data {
int phy;
int edmac_endian;
+
+ unsigned no_ether_link:1;
+ unsigned ether_link_active_low:1;
};
#endif
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index b5afbec..04a2188 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -640,5 +640,7 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 0663a0e..9e5c9b1 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -772,5 +772,7 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a9..2bd5c28 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,6 +25,9 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select RTC_CLASS
select RTC_DRV_M48T59
+ select HAVE_PERF_COUNTERS
+ select HAVE_DMA_ATTRS
+ select HAVE_DMA_API_DEBUG
config SPARC32
def_bool !64BIT
@@ -44,6 +47,7 @@
select RTC_DRV_BQ4802
select RTC_DRV_SUN4V
select RTC_DRV_STARFIRE
+ select HAVE_PERF_COUNTERS
config ARCH_DEFCONFIG
string
@@ -437,6 +441,17 @@
If unsure, say N.
+config SPARC_LEON
+ bool "Sparc Leon processor family"
+ depends on SPARC32
+ ---help---
+ If you say Y here if you are running on a SPARC-LEON processor.
+ The LEON processor is a synthesizable VHDL model of the
+ SPARC-v8 standard. LEON is part of the GRLIB collection of
+ IP cores that are distributed under GPL. GRLIB can be downloaded
+ from www.gaisler.com. You can download a sparc-linux cross-compilation
+ toolchain at www.gaisler.com.
+
endmenu
menu "Bus options (PCI etc.)"
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 2003ded..467221d 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -38,10 +38,6 @@
# Actual linking is done with "make image".
LDFLAGS_vmlinux = -r
-# Default target
-all: zImage
-
-
else
#####
# sparc64
@@ -91,6 +87,9 @@
boot := arch/sparc/boot
+# Default target
+all: zImage
+
image zImage tftpboot.img vmlinux.aout: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
@@ -109,8 +108,9 @@
endef
else
define archhelp
- echo '* vmlinux - Standard sparc64 kernel'
- echo ' vmlinux.aout - a.out kernel for sparc64'
+ echo '* vmlinux - standard sparc64 kernel'
+ echo '* zImage - stripped and compressed sparc64 kernel ($(boot)/zImage)'
+ echo ' vmlinux.aout - a.out kernel for sparc64'
echo ' tftpboot.img - image prepared for tftp'
endef
endif
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 1ff0fd9..97e3feb 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -79,6 +79,9 @@
$(call if_changed,strip)
@echo ' kernel: $@ is ready'
+$(obj)/zImage: $(obj)/image
+ $(call if_changed,gzip)
+
$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 8bcd27a..a0f62a8 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 04:04:46 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:45:52 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
@@ -17,6 +17,7 @@
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -74,7 +75,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -87,8 +87,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -97,6 +102,10 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -154,9 +163,9 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
@@ -264,6 +273,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -281,7 +291,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -335,6 +349,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -358,10 +373,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -379,6 +390,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -387,6 +399,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -401,7 +414,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -426,13 +438,16 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -463,6 +478,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -482,6 +498,7 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -629,6 +646,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -668,22 +690,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -776,6 +783,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -799,10 +810,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -985,6 +998,7 @@
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
+# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_STACK_DEBUG is not set
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 0123a4c..fdddf7a 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 16 04:59:36 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:56:02 2009
#
CONFIG_64BIT=y
CONFIG_SPARC=y
@@ -26,6 +26,7 @@
CONFIG_OF=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -119,6 +120,11 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -204,7 +210,6 @@
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
@@ -410,6 +415,7 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
@@ -562,6 +568,7 @@
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
@@ -573,7 +580,11 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -667,6 +678,7 @@
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -773,6 +785,7 @@
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -870,6 +883,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -898,13 +912,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -959,6 +977,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -994,23 +1013,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1284,7 +1289,6 @@
#
# Miscellaneous USB options
#
-CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
@@ -1296,6 +1300,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1374,7 +1379,6 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
@@ -1420,6 +1424,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1448,6 +1453,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1480,11 +1489,11 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1560,7 +1569,7 @@
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
index 74703c5..b2e3db6 100644
--- a/arch/sparc/include/asm/asi.h
+++ b/arch/sparc/include/asm/asi.h
@@ -40,7 +40,11 @@
#define ASI_M_UNA01 0x01 /* Same here... */
#define ASI_M_MXCC 0x02 /* Access to TI VIKING MXCC registers */
#define ASI_M_FLUSH_PROBE 0x03 /* Reference MMU Flush/Probe; rw, ss */
+#ifndef CONFIG_SPARC_LEON
#define ASI_M_MMUREGS 0x04 /* MMU Registers; rw, ss */
+#else
+#define ASI_M_MMUREGS 0x19
+#endif /* CONFIG_SPARC_LEON */
#define ASI_M_TLBDIAG 0x05 /* MMU TLB only Diagnostics */
#define ASI_M_DIAGS 0x06 /* Reference MMU Diagnostics */
#define ASI_M_IODIAG 0x07 /* MMU I/O TLB only Diagnostics */
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 204e4bf..5a8c308 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -3,6 +3,7 @@
#include <linux/scatterlist.h>
#include <linux/mm.h>
+#include <linux/dma-debug.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
@@ -13,142 +14,40 @@
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#define dma_is_consistent(d, h) (1)
-struct dma_ops {
- void *(*alloc_coherent)(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag);
- void (*free_coherent)(struct device *dev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle);
- dma_addr_t (*map_page)(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction);
- void (*unmap_page)(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction);
- int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction);
- void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
- int nhwentries,
- enum dma_data_direction direction);
- void (*sync_single_for_cpu)(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction);
- void (*sync_single_for_device)(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction);
- void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
- int nelems,
- enum dma_data_direction direction);
- void (*sync_sg_for_device)(struct device *dev,
- struct scatterlist *sg, int nents,
- enum dma_data_direction dir);
-};
-extern const struct dma_ops *dma_ops;
+extern struct dma_map_ops *dma_ops, pci32_dma_ops;
+extern struct bus_type pci_bus_type;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+#if defined(CONFIG_SPARC32) && defined(CONFIG_PCI)
+ if (dev->bus == &pci_bus_type)
+ return &pci32_dma_ops;
+#endif
+ return dma_ops;
+}
+
+#include <asm-generic/dma-mapping-common.h>
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
- return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ void *cpu_addr;
+
+ cpu_addr = ops->alloc_coherent(dev, size, dma_handle, flag);
+ debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+ return cpu_addr;
}
static inline void dma_free_coherent(struct device *dev, size_t size,
void *cpu_addr, dma_addr_t dma_handle)
{
- dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
+ struct dma_map_ops *ops = get_dma_ops(dev);
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- return dma_ops->map_page(dev, virt_to_page(cpu_addr),
- (unsigned long)cpu_addr & ~PAGE_MASK, size,
- direction);
+ debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+ ops->free_coherent(dev, size, cpu_addr, dma_handle);
}
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_ops->unmap_page(dev, dma_addr, size, direction);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- return dma_ops->map_page(dev, page, offset, size, direction);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_ops->unmap_page(dev, dma_address, size, direction);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
- return dma_ops->map_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
- dma_ops->unmap_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction direction)
-{
- if (dma_ops->sync_single_for_device)
- dma_ops->sync_single_for_device(dev, dma_handle, size,
- direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- if (dma_ops->sync_sg_for_device)
- dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir)
-{
- dma_sync_single_for_cpu(dev, dma_handle+offset, size, dir);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction dir)
-{
- dma_sync_single_for_device(dev, dma_handle+offset, size, dir);
-}
-
-
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return (dma_addr == DMA_ERROR_CODE);
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 1934f2c..a0b443c 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -89,8 +89,8 @@
return retval;
}
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
extern void *hardirq_stack[NR_CPUS];
extern void *softirq_stack[NR_CPUS];
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
new file mode 100644
index 0000000..28a42b7
--- /dev/null
+++ b/arch/sparc/include/asm/leon.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2004 Konrad Eisele (eiselekd@web.de,konrad@gaisler.com) Gaisler Research
+ * Copyright (C) 2004 Stefan Holst (mail@s-holst.de) Uni-Stuttgart
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#ifndef LEON_H_INCLUDE
+#define LEON_H_INCLUDE
+
+#ifdef CONFIG_SPARC_LEON
+
+#define ASI_LEON_NOCACHE 0x01
+
+#define ASI_LEON_DCACHE_MISS 0x1
+
+#define ASI_LEON_CACHEREGS 0x02
+#define ASI_LEON_IFLUSH 0x10
+#define ASI_LEON_DFLUSH 0x11
+
+#define ASI_LEON_MMUFLUSH 0x18
+#define ASI_LEON_MMUREGS 0x19
+#define ASI_LEON_BYPASS 0x1c
+#define ASI_LEON_FLUSH_PAGE 0x10
+
+/* mmu register access, ASI_LEON_MMUREGS */
+#define LEON_CNR_CTRL 0x000
+#define LEON_CNR_CTXP 0x100
+#define LEON_CNR_CTX 0x200
+#define LEON_CNR_F 0x300
+#define LEON_CNR_FADDR 0x400
+
+#define LEON_CNR_CTX_NCTX 256 /*number of MMU ctx */
+
+#define LEON_CNR_CTRL_TLBDIS 0x80000000
+
+#define LEON_MMUTLB_ENT_MAX 64
+
+/*
+ * diagnostic access from mmutlb.vhd:
+ * 0: pte address
+ * 4: pte
+ * 8: additional flags
+ */
+#define LEON_DIAGF_LVL 0x3
+#define LEON_DIAGF_WR 0x8
+#define LEON_DIAGF_WR_SHIFT 3
+#define LEON_DIAGF_HIT 0x10
+#define LEON_DIAGF_HIT_SHIFT 4
+#define LEON_DIAGF_CTX 0x1fe0
+#define LEON_DIAGF_CTX_SHIFT 5
+#define LEON_DIAGF_VALID 0x2000
+#define LEON_DIAGF_VALID_SHIFT 13
+
+/*
+ * Interrupt Sources
+ *
+ * The interrupt source numbers directly map to the trap type and to
+ * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
+ * and the Interrupt Pending Registers.
+ */
+#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1
+#define LEON_INTERRUPT_UART_1_RX_TX 2
+#define LEON_INTERRUPT_UART_0_RX_TX 3
+#define LEON_INTERRUPT_EXTERNAL_0 4
+#define LEON_INTERRUPT_EXTERNAL_1 5
+#define LEON_INTERRUPT_EXTERNAL_2 6
+#define LEON_INTERRUPT_EXTERNAL_3 7
+#define LEON_INTERRUPT_TIMER1 8
+#define LEON_INTERRUPT_TIMER2 9
+#define LEON_INTERRUPT_EMPTY1 10
+#define LEON_INTERRUPT_EMPTY2 11
+#define LEON_INTERRUPT_OPEN_ETH 12
+#define LEON_INTERRUPT_EMPTY4 13
+#define LEON_INTERRUPT_EMPTY5 14
+#define LEON_INTERRUPT_EMPTY6 15
+
+/* irq masks */
+#define LEON_HARD_INT(x) (1 << (x)) /* irq 0-15 */
+#define LEON_IRQMASK_R 0x0000fffe /* bit 15- 1 of lregs.irqmask */
+#define LEON_IRQPRIO_R 0xfffe0000 /* bit 31-17 of lregs.irqmask */
+
+/* leon uart register definitions */
+#define LEON_OFF_UDATA 0x0
+#define LEON_OFF_USTAT 0x4
+#define LEON_OFF_UCTRL 0x8
+#define LEON_OFF_USCAL 0xc
+
+#define LEON_UCTRL_RE 0x01
+#define LEON_UCTRL_TE 0x02
+#define LEON_UCTRL_RI 0x04
+#define LEON_UCTRL_TI 0x08
+#define LEON_UCTRL_PS 0x10
+#define LEON_UCTRL_PE 0x20
+#define LEON_UCTRL_FL 0x40
+#define LEON_UCTRL_LB 0x80
+
+#define LEON_USTAT_DR 0x01
+#define LEON_USTAT_TS 0x02
+#define LEON_USTAT_TH 0x04
+#define LEON_USTAT_BR 0x08
+#define LEON_USTAT_OV 0x10
+#define LEON_USTAT_PE 0x20
+#define LEON_USTAT_FE 0x40
+
+#define LEON_MCFG2_SRAMDIS 0x00002000
+#define LEON_MCFG2_SDRAMEN 0x00004000
+#define LEON_MCFG2_SRAMBANKSZ 0x00001e00 /* [12-9] */
+#define LEON_MCFG2_SRAMBANKSZ_SHIFT 9
+#define LEON_MCFG2_SDRAMBANKSZ 0x03800000 /* [25-23] */
+#define LEON_MCFG2_SDRAMBANKSZ_SHIFT 23
+
+#define LEON_TCNT0_MASK 0x7fffff
+
+#define LEON_USTAT_ERROR (LEON_USTAT_OV | LEON_USTAT_PE | LEON_USTAT_FE)
+/* no break yet */
+
+#define ASI_LEON3_SYSCTRL 0x02
+#define ASI_LEON3_SYSCTRL_ICFG 0x08
+#define ASI_LEON3_SYSCTRL_DCFG 0x0c
+#define ASI_LEON3_SYSCTRL_CFG_SNOOPING (1 << 27)
+#define ASI_LEON3_SYSCTRL_CFG_SSIZE(c) (1 << ((c >> 20) & 0xf))
+
+#ifndef __ASSEMBLY__
+
+/* do a virtual address read without cache */
+static inline unsigned long leon_readnobuffer_reg(unsigned long paddr)
+{
+ unsigned long retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r"(retval) : "r"(paddr), "i"(ASI_LEON_NOCACHE));
+ return retval;
+}
+
+/* do a physical address bypass write, i.e. for 0x80000000 */
+static inline void leon_store_reg(unsigned long paddr, unsigned long value)
+{
+ __asm__ __volatile__("sta %0, [%1] %2\n\t" : : "r"(value), "r"(paddr),
+ "i"(ASI_LEON_BYPASS) : "memory");
+}
+
+/* do a physical address bypass load, i.e. for 0x80000000 */
+static inline unsigned long leon_load_reg(unsigned long paddr)
+{
+ unsigned long retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r"(retval) : "r"(paddr), "i"(ASI_LEON_BYPASS));
+ return retval;
+}
+
+extern inline void leon_srmmu_disabletlb(void)
+{
+ unsigned int retval;
+ __asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
+ "i"(ASI_LEON_MMUREGS));
+ retval |= LEON_CNR_CTRL_TLBDIS;
+ __asm__ __volatile__("sta %0, [%%g0] %2\n\t" : : "r"(retval), "r"(0),
+ "i"(ASI_LEON_MMUREGS) : "memory");
+}
+
+extern inline void leon_srmmu_enabletlb(void)
+{
+ unsigned int retval;
+ __asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
+ "i"(ASI_LEON_MMUREGS));
+ retval = retval & ~LEON_CNR_CTRL_TLBDIS;
+ __asm__ __volatile__("sta %0, [%%g0] %2\n\t" : : "r"(retval), "r"(0),
+ "i"(ASI_LEON_MMUREGS) : "memory");
+}
+
+/* macro access for leon_load_reg() and leon_store_reg() */
+#define LEON3_BYPASS_LOAD_PA(x) (leon_load_reg((unsigned long)(x)))
+#define LEON3_BYPASS_STORE_PA(x, v) (leon_store_reg((unsigned long)(x), (unsigned long)(v)))
+#define LEON3_BYPASS_ANDIN_PA(x, v) LEON3_BYPASS_STORE_PA(x, LEON3_BYPASS_LOAD_PA(x) & v)
+#define LEON3_BYPASS_ORIN_PA(x, v) LEON3_BYPASS_STORE_PA(x, LEON3_BYPASS_LOAD_PA(x) | v)
+#define LEON_BYPASS_LOAD_PA(x) leon_load_reg((unsigned long)(x))
+#define LEON_BYPASS_STORE_PA(x, v) leon_store_reg((unsigned long)(x), (unsigned long)(v))
+#define LEON_REGLOAD_PA(x) leon_load_reg((unsigned long)(x)+LEON_PREGS)
+#define LEON_REGSTORE_PA(x, v) leon_store_reg((unsigned long)(x)+LEON_PREGS, (unsigned long)(v))
+#define LEON_REGSTORE_OR_PA(x, v) LEON_REGSTORE_PA(x, LEON_REGLOAD_PA(x) | (unsigned long)(v))
+#define LEON_REGSTORE_AND_PA(x, v) LEON_REGSTORE_PA(x, LEON_REGLOAD_PA(x) & (unsigned long)(v))
+
+/* macro access for leon_readnobuffer_reg() */
+#define LEON_BYPASSCACHE_LOAD_VA(x) leon_readnobuffer_reg((unsigned long)(x))
+
+extern void sparc_leon_eirq_register(int eirq);
+extern void leon_init(void);
+extern void leon_switch_mm(void);
+extern void leon_init_IRQ(void);
+
+extern unsigned long last_valid_pfn;
+
+extern inline unsigned long sparc_leon3_get_dcachecfg(void)
+{
+ unsigned int retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r"(retval) :
+ "r"(ASI_LEON3_SYSCTRL_DCFG),
+ "i"(ASI_LEON3_SYSCTRL));
+ return retval;
+}
+
+/* enable snooping */
+extern inline void sparc_leon3_enable_snooping(void)
+{
+ __asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
+ "set 0x800000, %%l2\n\t"
+ "or %%l2, %%l1, %%l2\n\t"
+ "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
+};
+
+extern inline void sparc_leon3_disable_cache(void)
+{
+ __asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
+ "set 0x00000f, %%l2\n\t"
+ "andn %%l2, %%l1, %%l2\n\t"
+ "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
+};
+
+#endif /*!__ASSEMBLY__*/
+
+#ifdef CONFIG_SMP
+# define LEON3_IRQ_RESCHEDULE 13
+# define LEON3_IRQ_TICKER (leon_percpu_timer_dev[0].irq)
+# define LEON3_IRQ_CROSS_CALL 15
+#endif
+
+#if defined(PAGE_SIZE_LEON_8K)
+#define LEON_PAGE_SIZE_LEON 1
+#elif defined(PAGE_SIZE_LEON_16K)
+#define LEON_PAGE_SIZE_LEON 2)
+#else
+#define LEON_PAGE_SIZE_LEON 0
+#endif
+
+#if LEON_PAGE_SIZE_LEON == 0
+/* [ 8, 6, 6 ] + 12 */
+#define LEON_PGD_SH 24
+#define LEON_PGD_M 0xff
+#define LEON_PMD_SH 18
+#define LEON_PMD_SH_V (LEON_PGD_SH-2)
+#define LEON_PMD_M 0x3f
+#define LEON_PTE_SH 12
+#define LEON_PTE_M 0x3f
+#elif LEON_PAGE_SIZE_LEON == 1
+/* [ 7, 6, 6 ] + 13 */
+#define LEON_PGD_SH 25
+#define LEON_PGD_M 0x7f
+#define LEON_PMD_SH 19
+#define LEON_PMD_SH_V (LEON_PGD_SH-1)
+#define LEON_PMD_M 0x3f
+#define LEON_PTE_SH 13
+#define LEON_PTE_M 0x3f
+#elif LEON_PAGE_SIZE_LEON == 2
+/* [ 6, 6, 6 ] + 14 */
+#define LEON_PGD_SH 26
+#define LEON_PGD_M 0x3f
+#define LEON_PMD_SH 20
+#define LEON_PMD_SH_V (LEON_PGD_SH-0)
+#define LEON_PMD_M 0x3f
+#define LEON_PTE_SH 14
+#define LEON_PTE_M 0x3f
+#elif LEON_PAGE_SIZE_LEON == 3
+/* [ 4, 7, 6 ] + 15 */
+#define LEON_PGD_SH 28
+#define LEON_PGD_M 0x0f
+#define LEON_PMD_SH 21
+#define LEON_PMD_SH_V (LEON_PGD_SH-0)
+#define LEON_PMD_M 0x7f
+#define LEON_PTE_SH 15
+#define LEON_PTE_M 0x3f
+#else
+#error cannot determine LEON_PAGE_SIZE_LEON
+#endif
+
+#define PAGE_MIN_SHIFT (12)
+#define PAGE_MIN_SIZE (1UL << PAGE_MIN_SHIFT)
+
+#define LEON3_XCCR_SETS_MASK 0x07000000UL
+#define LEON3_XCCR_SSIZE_MASK 0x00f00000UL
+
+#define LEON2_CCR_DSETS_MASK 0x03000000UL
+#define LEON2_CFG_SSIZE_MASK 0x00007000UL
+
+#ifndef __ASSEMBLY__
+extern unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr);
+extern void leon_flush_icache_all(void);
+extern void leon_flush_dcache_all(void);
+extern void leon_flush_cache_all(void);
+extern void leon_flush_tlb_all(void);
+extern int leon_flush_during_switch;
+extern int leon_flush_needed(void);
+
+struct vm_area_struct;
+extern void leon_flush_icache_all(void);
+extern void leon_flush_dcache_all(void);
+extern void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page);
+extern void leon_flush_cache_all(void);
+extern void leon_flush_tlb_all(void);
+extern int leon_flush_during_switch;
+extern int leon_flush_needed(void);
+extern void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page);
+
+/* struct that hold LEON3 cache configuration registers */
+struct leon3_cacheregs {
+ unsigned long ccr; /* 0x00 - Cache Control Register */
+ unsigned long iccr; /* 0x08 - Instruction Cache Configuration Register */
+ unsigned long dccr; /* 0x0c - Data Cache Configuration Register */
+};
+
+/* struct that hold LEON2 cache configuration register
+ * & configuration register
+ */
+struct leon2_cacheregs {
+ unsigned long ccr, cfg;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+
+struct device_node;
+extern int sparc_leon_eirq_get(int eirq, int cpu);
+extern irqreturn_t sparc_leon_eirq_isr(int dummy, void *dev_id);
+extern void sparc_leon_eirq_register(int eirq);
+extern void leon_clear_clock_irq(void);
+extern void leon_load_profile_irq(int cpu, unsigned int limit);
+extern void leon_init_timers(irq_handler_t counter_fn);
+extern void leon_clear_clock_irq(void);
+extern void leon_load_profile_irq(int cpu, unsigned int limit);
+extern void leon_trans_init(struct device_node *dp);
+extern void leon_node_init(struct device_node *dp, struct device_node ***nextp);
+extern void leon_init_IRQ(void);
+extern void leon_init(void);
+extern unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr);
+extern void init_leon(void);
+extern void poke_leonsparc(void);
+extern void leon3_getCacheRegs(struct leon3_cacheregs *regs);
+extern int leon_flush_needed(void);
+extern void leon_switch_mm(void);
+extern int srmmu_swprobe_trace;
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+/* macros used in leon_mm.c */
+#define PFN(x) ((x) >> PAGE_SHIFT)
+#define _pfn_valid(pfn) ((pfn < last_valid_pfn) && (pfn >= PFN(phys_base)))
+#define _SRMMU_PTE_PMASK_LEON 0xffffffff
+
+#else /* defined(CONFIG_SPARC_LEON) */
+
+/* nop definitions for !LEON case */
+#define leon_init() do {} while (0)
+#define leon_switch_mm() do {} while (0)
+#define leon_init_IRQ() do {} while (0)
+#define init_leon() do {} while (0)
+
+#endif /* !defined(CONFIG_SPARC_LEON) */
+
+#endif
diff --git a/arch/sparc/include/asm/leon_amba.h b/arch/sparc/include/asm/leon_amba.h
new file mode 100644
index 0000000..618e888
--- /dev/null
+++ b/arch/sparc/include/asm/leon_amba.h
@@ -0,0 +1,263 @@
+/*
+*Copyright (C) 2004 Konrad Eisele (eiselekd@web.de,konrad@gaisler.com), Gaisler Research
+*Copyright (C) 2004 Stefan Holst (mail@s-holst.de), Uni-Stuttgart
+*Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com),Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+*/
+
+#ifndef LEON_AMBA_H_INCLUDE
+#define LEON_AMBA_H_INCLUDE
+
+#ifndef __ASSEMBLY__
+
+struct amba_prom_registers {
+ unsigned int phys_addr; /* The physical address of this register */
+ unsigned int reg_size; /* How many bytes does this register take up? */
+};
+
+#endif
+
+/*
+ * The following defines the bits in the LEON UART Status Registers.
+ */
+
+#define LEON_REG_UART_STATUS_DR 0x00000001 /* Data Ready */
+#define LEON_REG_UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
+#define LEON_REG_UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
+#define LEON_REG_UART_STATUS_BR 0x00000008 /* Break Error */
+#define LEON_REG_UART_STATUS_OE 0x00000010 /* RX Overrun Error */
+#define LEON_REG_UART_STATUS_PE 0x00000020 /* RX Parity Error */
+#define LEON_REG_UART_STATUS_FE 0x00000040 /* RX Framing Error */
+#define LEON_REG_UART_STATUS_ERR 0x00000078 /* Error Mask */
+
+/*
+ * The following defines the bits in the LEON UART Ctrl Registers.
+ */
+
+#define LEON_REG_UART_CTRL_RE 0x00000001 /* Receiver enable */
+#define LEON_REG_UART_CTRL_TE 0x00000002 /* Transmitter enable */
+#define LEON_REG_UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
+#define LEON_REG_UART_CTRL_TI 0x00000008 /* Transmitter irq */
+#define LEON_REG_UART_CTRL_PS 0x00000010 /* Parity select */
+#define LEON_REG_UART_CTRL_PE 0x00000020 /* Parity enable */
+#define LEON_REG_UART_CTRL_FL 0x00000040 /* Flow control enable */
+#define LEON_REG_UART_CTRL_LB 0x00000080 /* Loop Back enable */
+
+#define LEON3_GPTIMER_EN 1
+#define LEON3_GPTIMER_RL 2
+#define LEON3_GPTIMER_LD 4
+#define LEON3_GPTIMER_IRQEN 8
+#define LEON3_GPTIMER_SEPIRQ 8
+
+#define LEON23_REG_TIMER_CONTROL_EN 0x00000001 /* 1 = enable counting */
+/* 0 = hold scalar and counter */
+#define LEON23_REG_TIMER_CONTROL_RL 0x00000002 /* 1 = reload at 0 */
+ /* 0 = stop at 0 */
+#define LEON23_REG_TIMER_CONTROL_LD 0x00000004 /* 1 = load counter */
+ /* 0 = no function */
+#define LEON23_REG_TIMER_CONTROL_IQ 0x00000008 /* 1 = irq enable */
+ /* 0 = no function */
+
+/*
+ * The following defines the bits in the LEON PS/2 Status Registers.
+ */
+
+#define LEON_REG_PS2_STATUS_DR 0x00000001 /* Data Ready */
+#define LEON_REG_PS2_STATUS_PE 0x00000002 /* Parity error */
+#define LEON_REG_PS2_STATUS_FE 0x00000004 /* Framing error */
+#define LEON_REG_PS2_STATUS_KI 0x00000008 /* Keyboard inhibit */
+#define LEON_REG_PS2_STATUS_RF 0x00000010 /* RX buffer full */
+#define LEON_REG_PS2_STATUS_TF 0x00000020 /* TX buffer full */
+
+/*
+ * The following defines the bits in the LEON PS/2 Ctrl Registers.
+ */
+
+#define LEON_REG_PS2_CTRL_RE 0x00000001 /* Receiver enable */
+#define LEON_REG_PS2_CTRL_TE 0x00000002 /* Transmitter enable */
+#define LEON_REG_PS2_CTRL_RI 0x00000004 /* Keyboard receive irq */
+#define LEON_REG_PS2_CTRL_TI 0x00000008 /* Keyboard transmit irq */
+
+#define LEON3_IRQMPSTATUS_CPUNR 28
+#define LEON3_IRQMPSTATUS_BROADCAST 27
+
+#define GPTIMER_CONFIG_IRQNT(a) (((a) >> 3) & 0x1f)
+#define GPTIMER_CONFIG_ISSEP(a) ((a) & (1 << 8))
+#define GPTIMER_CONFIG_NTIMERS(a) ((a) & (0x7))
+#define LEON3_GPTIMER_CTRL_PENDING 0x10
+#define LEON3_GPTIMER_CONFIG_NRTIMERS(c) ((c)->config & 0x7)
+#define LEON3_GPTIMER_CTRL_ISPENDING(r) (((r)&LEON3_GPTIMER_CTRL_PENDING) ? 1 : 0)
+
+#ifdef CONFIG_SPARC_LEON
+
+#ifndef __ASSEMBLY__
+
+struct leon3_irqctrl_regs_map {
+ u32 ilevel;
+ u32 ipend;
+ u32 iforce;
+ u32 iclear;
+ u32 mpstatus;
+ u32 mpbroadcast;
+ u32 notused02;
+ u32 notused03;
+ u32 notused10;
+ u32 notused11;
+ u32 notused12;
+ u32 notused13;
+ u32 notused20;
+ u32 notused21;
+ u32 notused22;
+ u32 notused23;
+ u32 mask[16];
+ u32 force[16];
+ /* Extended IRQ registers */
+ u32 intid[16]; /* 0xc0 */
+};
+
+struct leon3_apbuart_regs_map {
+ u32 data;
+ u32 status;
+ u32 ctrl;
+ u32 scaler;
+};
+
+struct leon3_gptimerelem_regs_map {
+ u32 val;
+ u32 rld;
+ u32 ctrl;
+ u32 unused;
+};
+
+struct leon3_gptimer_regs_map {
+ u32 scalar;
+ u32 scalar_reload;
+ u32 config;
+ u32 unused;
+ struct leon3_gptimerelem_regs_map e[8];
+};
+
+/*
+ * Types and structure used for AMBA Plug & Play bus scanning
+ */
+
+#define AMBA_MAXAPB_DEVS 64
+#define AMBA_MAXAPB_DEVS_PERBUS 16
+
+struct amba_device_table {
+ int devnr; /* number of devices on AHB or APB bus */
+ unsigned int *addr[16]; /* addresses to the devices configuration tables */
+ unsigned int allocbits[1]; /* 0=unallocated, 1=allocated driver */
+};
+
+struct amba_apbslv_device_table {
+ int devnr; /* number of devices on AHB or APB bus */
+ unsigned int *addr[AMBA_MAXAPB_DEVS]; /* addresses to the devices configuration tables */
+ unsigned int apbmst[AMBA_MAXAPB_DEVS]; /* apb master if a entry is a apb slave */
+ unsigned int apbmstidx[AMBA_MAXAPB_DEVS]; /* apb master idx if a entry is a apb slave */
+ unsigned int allocbits[4]; /* 0=unallocated, 1=allocated driver */
+};
+
+struct amba_confarea_type {
+ struct amba_confarea_type *next;/* next bus in chain */
+ struct amba_device_table ahbmst;
+ struct amba_device_table ahbslv;
+ struct amba_apbslv_device_table apbslv;
+ unsigned int apbmst;
+};
+
+/* collect apb slaves */
+struct amba_apb_device {
+ unsigned int start, irq, bus_id;
+ struct amba_confarea_type *bus;
+};
+
+/* collect ahb slaves */
+struct amba_ahb_device {
+ unsigned int start[4], irq, bus_id;
+ struct amba_confarea_type *bus;
+};
+
+struct device_node;
+void _amba_init(struct device_node *dp, struct device_node ***nextp);
+
+extern struct leon3_irqctrl_regs_map *leon3_irqctrl_regs;
+extern struct leon3_gptimer_regs_map *leon3_gptimer_regs;
+extern struct amba_apb_device leon_percpu_timer_dev[16];
+extern int leondebug_irq_disable;
+extern int leon_debug_irqout;
+extern unsigned long leon3_gptimer_irq;
+extern unsigned int sparc_leon_eirq;
+
+#endif /* __ASSEMBLY__ */
+
+#define LEON3_IO_AREA 0xfff00000
+#define LEON3_CONF_AREA 0xff000
+#define LEON3_AHB_SLAVE_CONF_AREA (1 << 11)
+
+#define LEON3_AHB_CONF_WORDS 8
+#define LEON3_APB_CONF_WORDS 2
+#define LEON3_AHB_MASTERS 16
+#define LEON3_AHB_SLAVES 16
+#define LEON3_APB_SLAVES 16
+#define LEON3_APBUARTS 8
+
+/* Vendor codes */
+#define VENDOR_GAISLER 1
+#define VENDOR_PENDER 2
+#define VENDOR_ESA 4
+#define VENDOR_OPENCORES 8
+
+/* Gaisler Research device id's */
+#define GAISLER_LEON3 0x003
+#define GAISLER_LEON3DSU 0x004
+#define GAISLER_ETHAHB 0x005
+#define GAISLER_APBMST 0x006
+#define GAISLER_AHBUART 0x007
+#define GAISLER_SRCTRL 0x008
+#define GAISLER_SDCTRL 0x009
+#define GAISLER_APBUART 0x00C
+#define GAISLER_IRQMP 0x00D
+#define GAISLER_AHBRAM 0x00E
+#define GAISLER_GPTIMER 0x011
+#define GAISLER_PCITRG 0x012
+#define GAISLER_PCISBRG 0x013
+#define GAISLER_PCIFBRG 0x014
+#define GAISLER_PCITRACE 0x015
+#define GAISLER_PCIDMA 0x016
+#define GAISLER_AHBTRACE 0x017
+#define GAISLER_ETHDSU 0x018
+#define GAISLER_PIOPORT 0x01A
+#define GAISLER_GRGPIO 0x01A
+#define GAISLER_AHBJTAG 0x01c
+#define GAISLER_ETHMAC 0x01D
+#define GAISLER_AHB2AHB 0x020
+#define GAISLER_USBDC 0x021
+#define GAISLER_ATACTRL 0x024
+#define GAISLER_DDRSPA 0x025
+#define GAISLER_USBEHC 0x026
+#define GAISLER_USBUHC 0x027
+#define GAISLER_I2CMST 0x028
+#define GAISLER_SPICTRL 0x02D
+#define GAISLER_DDR2SPA 0x02E
+#define GAISLER_SPIMCTRL 0x045
+#define GAISLER_LEON4 0x048
+#define GAISLER_LEON4DSU 0x049
+#define GAISLER_AHBSTAT 0x052
+#define GAISLER_FTMCTRL 0x054
+#define GAISLER_KBD 0x060
+#define GAISLER_VGA 0x061
+#define GAISLER_SVGA 0x063
+#define GAISLER_GRSYSMON 0x066
+#define GAISLER_GRACECTRL 0x067
+
+#define GAISLER_L2TIME 0xffd /* internal device: leon2 timer */
+#define GAISLER_L2C 0xffe /* internal device: leon2compat */
+#define GAISLER_PLUGPLAY 0xfff /* internal device: plug & play configarea */
+
+#define amba_vendor(x) (((x) >> 24) & 0xff)
+
+#define amba_device(x) (((x) >> 12) & 0xfff)
+
+#endif /* !defined(CONFIG_SPARC_LEON) */
+
+#endif
diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
index c28c2f2..cd9c099 100644
--- a/arch/sparc/include/asm/machines.h
+++ b/arch/sparc/include/asm/machines.h
@@ -15,7 +15,7 @@
/* Current number of machines we know about that has an IDPROM
* machtype entry including one entry for the 0x80 OBP machines.
*/
-#define NUM_SUN_MACHINES 15
+#define NUM_SUN_MACHINES 16
/* The machine type in the idprom area looks like this:
*
@@ -30,6 +30,7 @@
#define SM_ARCH_MASK 0xf0
#define SM_SUN4 0x20
+#define M_LEON 0x30
#define SM_SUN4C 0x50
#define SM_SUN4M 0x70
#define SM_SUN4M_OBP 0x80
@@ -41,6 +42,9 @@
#define SM_4_330 0x03 /* Sun 4/300 series */
#define SM_4_470 0x04 /* Sun 4/400 series */
+/* Leon machines */
+#define M_LEON3_SOC 0x02 /* Leon3 SoC */
+
/* Sun4c machines Full Name - PROM NAME */
#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */
#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */
diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index fbd546d..72e6500 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -5,6 +5,9 @@
extern void perfctr_irq(int irq, struct pt_regs *regs);
extern void nmi_adjust_hz(unsigned int new_hz);
-extern int nmi_usable;
+extern atomic_t nmi_active;
+
+extern void start_nmi_watchdog(void *unused);
+extern void stop_nmi_watchdog(void *unused);
#endif /* __NMI_H */
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
index 6e14fd1..d9c031f 100644
--- a/arch/sparc/include/asm/pci.h
+++ b/arch/sparc/include/asm/pci.h
@@ -5,4 +5,7 @@
#else
#include <asm/pci_32.h>
#endif
+
+#include <asm-generic/pci-dma-compat.h>
+
#endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index b41c4c1..ac0e836 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -31,42 +31,8 @@
*/
#define PCI_DMA_BUS_IS_PHYS (0)
-#include <asm/scatterlist.h>
-
struct pci_dev;
-/* Allocate and map kernel buffer using consistent mode DMA for a device.
- * hwdev should be valid struct pci_dev pointer for PCI devices.
- */
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
-
-/* Free and unmap a consistent DMA buffer.
- * cpu_addr is what was returned from pci_alloc_consistent,
- * size must be the same as what as passed into pci_alloc_consistent,
- * and likewise dma_addr must be the same as what *dma_addrp was set to.
- *
- * References to the memory and mappings assosciated with cpu_addr/dma_addr
- * past this call are illegal.
- */
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
- */
-extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
-
-/* Unmap a single streaming mode DMA translation. The dma_addr and size
- * must match what was provided for in a previous pci_map_single call. All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
-
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
@@ -81,69 +47,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-/*
- * Same as above, only with pages instead of mapped addresses.
- */
-extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction);
-extern void pci_unmap_page(struct pci_dev *hwdev,
- dma_addr_t dma_address, size_t size, int direction);
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA. This is the scather-gather version of the
- * above pci_map_single interface. Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length. They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- * DMA address/length pairs than there are SG table elements.
- * (for example via virtual mapping capabilities)
- * The routine returns the number of addr/length pairs actually
- * used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so. At the
- * next point you give the PCI dma address back to the card, you
- * must first perform a pci_dma_sync_for_device, and then the device
- * again owns the buffer.
- */
-extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single_* but for a scatter-gather list,
- * same rules and usage.
- */
-extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly. For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
- return 1;
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -154,14 +57,6 @@
}
#endif
-#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
-
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
- dma_addr_t dma_addr)
-{
- return (dma_addr == PCI_DMA_ERROR_CODE);
-}
-
struct device_node;
extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 7a1e356..5cc9f6a 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -35,37 +35,6 @@
*/
#define PCI_DMA_BUS_IS_PHYS (0)
-static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
- dma_addr_t *dma_handle)
-{
- return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
- size_t size, int direction)
-{
- return dma_map_single(&pdev->dev, ptr, size,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
- size_t size, int direction)
-{
- dma_unmap_single(&pdev->dev, dma_addr, size,
- (enum dma_data_direction) direction);
-}
-
-#define pci_map_page(dev, page, off, size, dir) \
- pci_map_single(dev, (page_address(page) + (off)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
- pci_unmap_single(dev,addr,sz,dir)
-
/* pci_unmap_{single,page} is not a nop, thus... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
@@ -80,57 +49,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
- int nents, int direction)
-{
- return dma_map_sg(&pdev->dev, sg, nents,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
- int nents, int direction)
-{
- dma_unmap_sg(&pdev->dev, sg, nents,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma_addr_t dma_handle,
- size_t size, int direction)
-{
- dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
- dma_addr_t dma_handle,
- size_t size, int direction)
-{
- /* No flushing needed to sync cpu writes to the device. */
-}
-
-static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
- struct scatterlist *sg,
- int nents, int direction)
-{
- dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
- (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
- struct scatterlist *sg,
- int nelems, int direction)
-{
- /* No flushing needed to sync cpu writes to the device. */
-}
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly. For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
/* PCI IOMMU mapping bypass support. */
/* PCI 64-bit addressing works for all slots on all controller
@@ -140,12 +58,6 @@
#define PCI64_REQUIRED_MASK (~(dma64_addr_t)0)
#define PCI64_ADDR_BASE 0xfffc000000000000UL
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
- dma_addr_t dma_addr)
-{
- return dma_mapping_error(&pdev->dev, dma_addr);
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
new file mode 100644
index 0000000..5d7a8ca
--- /dev/null
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SPARC_PERF_COUNTER_H
+#define __ASM_SPARC_PERF_COUNTER_H
+
+extern void set_perf_counter_pending(void);
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
+#ifdef CONFIG_PERF_COUNTERS
+extern void init_hw_perf_counters(void);
+#else
+static inline void init_hw_perf_counters(void) { }
+#endif
+
+#endif
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index b049abf..0ff92fa 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -726,11 +726,17 @@
extern pte_t pgoff_to_pte(unsigned long);
#define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL)
-extern unsigned long *sparc64_valid_addr_bitmap;
+extern unsigned long sparc64_valid_addr_bitmap[];
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) \
- (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+static inline bool kern_addr_valid(unsigned long addr)
+{
+ unsigned long paddr = __pa(addr);
+
+ if ((paddr >> 41UL) != 0UL)
+ return false;
+ return test_bit(paddr >> 22, sparc64_valid_addr_bitmap);
+}
extern int page_in_phys_avail(unsigned long paddr);
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 808555f..1407c07 100644
--- a/arch/sparc/include/asm/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -267,6 +267,7 @@
}
+#ifndef CONFIG_SPARC_LEON
static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
{
unsigned long retval;
@@ -278,6 +279,9 @@
return retval;
}
+#else
+#define srmmu_hwprobe(addr) (srmmu_swprobe(addr, 0) & SRMMU_PTE_PMASK)
+#endif
static inline int
srmmu_get_pte (unsigned long addr)
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index be8d7aa..82a190d 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -118,5 +118,8 @@
extern char *of_console_path;
extern char *of_console_options;
+extern void (*prom_build_more)(struct device_node *dp, struct device_node ***nextp);
+extern char *build_full_name(struct device_node *dp);
+
#endif /* __KERNEL__ */
#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 982a12f..3a5ae3d 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -29,6 +29,9 @@
#define SO_RCVBUFFORCE 0x100b
#define SO_ERROR 0x1007
#define SO_TYPE 0x1008
+#define SO_PROTOCOL 0x1028
+#define SO_DOMAIN 0x1029
+
/* Linux specific, keep the same. */
#define SO_NO_CHECK 0x000b
diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
index 46f91ab..857630c 100644
--- a/arch/sparc/include/asm/spinlock_32.h
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -76,7 +76,7 @@
*
* Unfortunately this scheme limits us to ~16,000,000 cpus.
*/
-static inline void __read_lock(raw_rwlock_t *rw)
+static inline void arch_read_lock(raw_rwlock_t *rw)
{
register raw_rwlock_t *lp asm("g1");
lp = rw;
@@ -92,11 +92,11 @@
#define __raw_read_lock(lock) \
do { unsigned long flags; \
local_irq_save(flags); \
- __read_lock(lock); \
+ arch_read_lock(lock); \
local_irq_restore(flags); \
} while(0)
-static inline void __read_unlock(raw_rwlock_t *rw)
+static inline void arch_read_unlock(raw_rwlock_t *rw)
{
register raw_rwlock_t *lp asm("g1");
lp = rw;
@@ -112,7 +112,7 @@
#define __raw_read_unlock(lock) \
do { unsigned long flags; \
local_irq_save(flags); \
- __read_unlock(lock); \
+ arch_read_unlock(lock); \
local_irq_restore(flags); \
} while(0)
@@ -150,7 +150,7 @@
return (val == 0);
}
-static inline int __read_trylock(raw_rwlock_t *rw)
+static inline int arch_read_trylock(raw_rwlock_t *rw)
{
register raw_rwlock_t *lp asm("g1");
register int res asm("o0");
@@ -169,7 +169,7 @@
({ unsigned long flags; \
int res; \
local_irq_save(flags); \
- res = __read_trylock(lock); \
+ res = arch_read_trylock(lock); \
local_irq_restore(flags); \
res; \
})
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
index f6b2b92..43e5147 100644
--- a/arch/sparc/include/asm/spinlock_64.h
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -92,7 +92,7 @@
/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
-static void inline __read_lock(raw_rwlock_t *lock)
+static void inline arch_read_lock(raw_rwlock_t *lock)
{
unsigned long tmp1, tmp2;
@@ -115,7 +115,7 @@
: "memory");
}
-static int inline __read_trylock(raw_rwlock_t *lock)
+static int inline arch_read_trylock(raw_rwlock_t *lock)
{
int tmp1, tmp2;
@@ -136,7 +136,7 @@
return tmp1;
}
-static void inline __read_unlock(raw_rwlock_t *lock)
+static void inline arch_read_unlock(raw_rwlock_t *lock)
{
unsigned long tmp1, tmp2;
@@ -152,7 +152,7 @@
: "memory");
}
-static void inline __write_lock(raw_rwlock_t *lock)
+static void inline arch_write_lock(raw_rwlock_t *lock)
{
unsigned long mask, tmp1, tmp2;
@@ -177,7 +177,7 @@
: "memory");
}
-static void inline __write_unlock(raw_rwlock_t *lock)
+static void inline arch_write_unlock(raw_rwlock_t *lock)
{
__asm__ __volatile__(
" stw %%g0, [%0]"
@@ -186,7 +186,7 @@
: "memory");
}
-static int inline __write_trylock(raw_rwlock_t *lock)
+static int inline arch_write_trylock(raw_rwlock_t *lock)
{
unsigned long mask, tmp1, tmp2, result;
@@ -210,14 +210,14 @@
return result;
}
-#define __raw_read_lock(p) __read_lock(p)
-#define __raw_read_lock_flags(p, f) __read_lock(p)
-#define __raw_read_trylock(p) __read_trylock(p)
-#define __raw_read_unlock(p) __read_unlock(p)
-#define __raw_write_lock(p) __write_lock(p)
-#define __raw_write_lock_flags(p, f) __write_lock(p)
-#define __raw_write_unlock(p) __write_unlock(p)
-#define __raw_write_trylock(p) __write_trylock(p)
+#define __raw_read_lock(p) arch_read_lock(p)
+#define __raw_read_lock_flags(p, f) arch_read_lock(p)
+#define __raw_read_trylock(p) arch_read_trylock(p)
+#define __raw_read_unlock(p) arch_read_unlock(p)
+#define __raw_write_lock(p) arch_write_lock(p)
+#define __raw_write_lock_flags(p, f) arch_write_lock(p)
+#define __raw_write_unlock(p) arch_write_unlock(p)
+#define __raw_write_trylock(p) arch_write_trylock(p)
#define __raw_read_can_lock(rw) (!((rw)->lock & 0x80000000UL))
#define __raw_write_can_lock(rw) (!(rw)->lock)
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
index 751c8c1..890036b 100644
--- a/arch/sparc/include/asm/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
@@ -32,6 +32,7 @@
sun4u = 0x05, /* V8 ploos ploos */
sun_unknown = 0x06,
ap1000 = 0x07, /* almost a sun4m */
+ sparc_leon = 0x08, /* Leon SoC */
};
/* Really, userland should not be looking at any of this... */
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index 6c07781..25e848f 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -29,6 +29,10 @@
/* This cannot ever be a sun4c :) That's just history. */
#define ARCH_SUN4C 0
+extern const char *sparc_cpu_type;
+extern const char *sparc_fpu_type;
+extern const char *sparc_pmu_type;
+
extern char reboot_command[];
/* These are here in an effort to more fully work around Spitfire Errata
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index de671d7..09c79a9 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -8,9 +8,8 @@
* need to be careful to avoid a name clashes.
*/
-#if defined(__sparc__) && defined(__arch64__)
+#if defined(__sparc__)
-/*** SPARC 64 bit ***/
#include <asm-generic/int-ll64.h>
#ifndef __ASSEMBLY__
@@ -26,33 +25,21 @@
/* Dma addresses come in generic and 64-bit flavours. */
typedef u32 dma_addr_t;
+
+#if defined(__arch64__)
+
+/*** SPARC 64 bit ***/
typedef u64 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
#else
-
/*** SPARC 32 bit ***/
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-typedef u32 dma_addr_t;
typedef u32 dma64_addr_t;
+#endif /* defined(__arch64__) */
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif /* defined(__sparc__) && defined(__arch64__) */
+#endif /* defined(__sparc__) */
#endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index a38c032..9ea271e 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -7,8 +7,8 @@
#ifdef __KERNEL__
#include <linux/compiler.h>
-#include <linux/sched.h>
#include <linux/string.h>
+#include <linux/thread_info.h>
#include <asm/asi.h>
#include <asm/system.h>
#include <asm/spitfire.h>
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index b2c406d..706df66 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -395,8 +395,9 @@
#define __NR_preadv 324
#define __NR_pwritev 325
#define __NR_rt_tgsigqueueinfo 326
+#define __NR_perf_counter_open 327
-#define NR_SYSCALLS 327
+#define NR_SYSCALLS 328
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 475ce46..247cc620 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -41,6 +41,8 @@
obj-y += of_device_$(BITS).o
obj-$(CONFIG_SPARC64) += prom_irqtrans.o
+obj-$(CONFIG_SPARC_LEON)+= leon_kernel.o
+
obj-$(CONFIG_SPARC64) += reboot.o
obj-$(CONFIG_SPARC64) += sysfs.o
obj-$(CONFIG_SPARC64) += iommu.o
@@ -61,7 +63,7 @@
obj-$(CONFIG_SPARC32) += devres.o
devres-y := ../../../kernel/irq/devres.o
-obj-$(CONFIG_SPARC32) += dma.o
+obj-y += dma.o
obj-$(CONFIG_SPARC32_PCI) += pcic.o
@@ -101,3 +103,6 @@
obj-$(CONFIG_AUDIT) += audit.o
audit--$(CONFIG_AUDIT) := compat_audit.o
obj-$(CONFIG_COMPAT) += $(audit--y)
+
+pc--$(CONFIG_PERF_COUNTERS) := perf_counter.o
+obj-$(CONFIG_SPARC64) += $(pc--y)
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index d85c3dc..1446df9 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -312,7 +312,12 @@
psr = get_psr();
put_psr(psr | PSR_EF);
+#ifdef CONFIG_SPARC_LEON
+ fpu_vers = 7;
+#else
fpu_vers = ((get_fsr() >> 17) & 0x7);
+#endif
+
put_psr(psr);
set_cpu_and_fpu(psr_impl, psr_vers, fpu_vers);
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 524c32f..e1ba8ee 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -1,178 +1,13 @@
-/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
- *
- * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
- */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
+#include <linux/dma-debug.h>
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 15)
-#include "dma.h"
-
-int dma_supported(struct device *dev, u64 mask)
+static int __init dma_init(void)
{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_dma_supported(to_pci_dev(dev), mask);
-#endif
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
return 0;
}
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
- return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-static void *dma32_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
-#endif
- return sbus_alloc_consistent(dev, size, dma_handle);
-}
-
-static void dma32_free_coherent(struct device *dev, size_t size,
- void *cpu_addr, dma_addr_t dma_handle)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_free_consistent(to_pci_dev(dev), size,
- cpu_addr, dma_handle);
- return;
- }
-#endif
- sbus_free_consistent(dev, size, cpu_addr, dma_handle);
-}
-
-static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_map_page(to_pci_dev(dev), page, offset,
- size, (int)direction);
-#endif
- return sbus_map_single(dev, page_address(page) + offset,
- size, (int)direction);
-}
-
-static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_unmap_page(to_pci_dev(dev), dma_address,
- size, (int)direction);
- return;
- }
-#endif
- sbus_unmap_single(dev, dma_address, size, (int)direction);
-}
-
-static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type)
- return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
-#endif
- return sbus_map_sg(dev, sg, nents, direction);
-}
-
-void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
- return;
- }
-#endif
- sbus_unmap_sg(dev, sg, nents, (int)direction);
-}
-
-static void dma32_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
- size, (int)direction);
- return;
- }
-#endif
- sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
- size, (int)direction);
- return;
- }
-#endif
- sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- int nelems, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
- nelems, (int)direction);
- return;
- }
-#endif
- BUG();
-}
-
-static void dma32_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
- if (dev->bus == &pci_bus_type) {
- pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
- nelems, (int)direction);
- return;
- }
-#endif
- BUG();
-}
-
-static const struct dma_ops dma32_dma_ops = {
- .alloc_coherent = dma32_alloc_coherent,
- .free_coherent = dma32_free_coherent,
- .map_page = dma32_map_page,
- .unmap_page = dma32_unmap_page,
- .map_sg = dma32_map_sg,
- .unmap_sg = dma32_unmap_sg,
- .sync_single_for_cpu = dma32_sync_single_for_cpu,
- .sync_single_for_device = dma32_sync_single_for_device,
- .sync_sg_for_cpu = dma32_sync_sg_for_cpu,
- .sync_sg_for_device = dma32_sync_sg_for_device,
-};
-
-const struct dma_ops *dma_ops = &dma32_dma_ops;
-EXPORT_SYMBOL(dma_ops);
+fs_initcall(dma_init);
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
deleted file mode 100644
index f8d8951..0000000
--- a/arch/sparc/kernel/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
-dma_addr_t sbus_map_single(struct device *dev, void *va,
- size_t len, int direction);
-void sbus_unmap_single(struct device *dev, dma_addr_t ba,
- size_t n, int direction);
-int sbus_map_sg(struct device *dev, struct scatterlist *sg,
- int n, int direction);
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
- int n, int direction);
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
- size_t size, int direction);
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
- size_t size, int direction);
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 6b4d8ac..439d82a 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -809,6 +809,11 @@
nop
got_prop:
+#ifdef CONFIG_SPARC_LEON
+ /* no cpu-type check is needed, it is a SPARC-LEON */
+ ba sun4c_continue_boot
+ nop
+#endif
set cputypval, %o2
ldub [%o2 + 0x4], %l1
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 57922f6..52a15fe 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -31,6 +31,8 @@
{ .name = "Sun 4/200 Series", .id_machtype = (SM_SUN4 | SM_4_260) },
{ .name = "Sun 4/300 Series", .id_machtype = (SM_SUN4 | SM_4_330) },
{ .name = "Sun 4/400 Series", .id_machtype = (SM_SUN4 | SM_4_470) },
+/* Now Leon */
+{ .name = "Leon3 System-on-a-Chip", .id_machtype = (M_LEON | M_LEON3_SOC) },
/* Now, Sun4c's */
{ .name = "Sun4c SparcStation 1", .id_machtype = (SM_SUN4C | SM_4C_SS1) },
{ .name = "Sun4c SparcStation IPC", .id_machtype = (SM_SUN4C | SM_4C_IPC) },
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 0aeaefe..7690cc2 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -353,7 +353,8 @@
static dma_addr_t dma_4u_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t sz,
- enum dma_data_direction direction)
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct iommu *iommu;
struct strbuf *strbuf;
@@ -474,7 +475,8 @@
}
static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
- size_t sz, enum dma_data_direction direction)
+ size_t sz, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct iommu *iommu;
struct strbuf *strbuf;
@@ -520,7 +522,8 @@
}
static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct scatterlist *s, *outs, *segstart;
unsigned long flags, handle, prot, ctx;
@@ -691,7 +694,8 @@
}
static void dma_4u_unmap_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
unsigned long flags, ctx;
struct scatterlist *sg;
@@ -822,7 +826,7 @@
spin_unlock_irqrestore(&iommu->lock, flags);
}
-static const struct dma_ops sun4u_dma_ops = {
+static struct dma_map_ops sun4u_dma_ops = {
.alloc_coherent = dma_4u_alloc_coherent,
.free_coherent = dma_4u_free_coherent,
.map_page = dma_4u_map_page,
@@ -833,9 +837,11 @@
.sync_sg_for_cpu = dma_4u_sync_sg_for_cpu,
};
-const struct dma_ops *dma_ops = &sun4u_dma_ops;
+struct dma_map_ops *dma_ops = &sun4u_dma_ops;
EXPORT_SYMBOL(dma_ops);
+extern int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask);
+
int dma_supported(struct device *dev, u64 device_mask)
{
struct iommu *iommu = dev->archdata.iommu;
@@ -849,7 +855,7 @@
#ifdef CONFIG_PCI
if (dev->bus == &pci_bus_type)
- return pci_dma_supported(to_pci_dev(dev), device_mask);
+ return pci64_dma_supported(to_pci_dev(dev), device_mask);
#endif
return 0;
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 87ea0d0..9f61fd8 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/pci.h> /* struct pci_dev */
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/scatterlist.h>
#include <linux/of_device.h>
@@ -48,8 +49,6 @@
#include <asm/iommu.h>
#include <asm/io-unit.h>
-#include "dma.h"
-
#define mmu_inval_dma_area(p, l) /* Anton pulled it out for 2.4.0-xx */
static struct resource *_sparc_find_resource(struct resource *r,
@@ -246,7 +245,8 @@
* Typically devices use them for control blocks.
* CPU may access them without any explicit flushing.
*/
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
+static void *sbus_alloc_coherent(struct device *dev, size_t len,
+ dma_addr_t *dma_addrp, gfp_t gfp)
{
struct of_device *op = to_of_device(dev);
unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
@@ -299,7 +299,8 @@
return NULL;
}
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
+static void sbus_free_coherent(struct device *dev, size_t n, void *p,
+ dma_addr_t ba)
{
struct resource *res;
struct page *pgv;
@@ -317,7 +318,7 @@
n = (n + PAGE_SIZE-1) & PAGE_MASK;
if ((res->end-res->start)+1 != n) {
- printk("sbus_free_consistent: region 0x%lx asked 0x%lx\n",
+ printk("sbus_free_consistent: region 0x%lx asked 0x%zx\n",
(long)((res->end-res->start)+1), n);
return;
}
@@ -337,8 +338,13 @@
* CPU view of this memory may be inconsistent with
* a device view and explicit flushing is necessary.
*/
-dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
+static dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t len,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
+ void *va = page_address(page) + offset;
+
/* XXX why are some lengths signed, others unsigned? */
if (len <= 0) {
return 0;
@@ -350,12 +356,14 @@
return mmu_get_scsi_one(dev, va, len);
}
-void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
+static void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n,
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
mmu_release_scsi_one(dev, ba, n);
}
-int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n,
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
mmu_get_scsi_sgl(dev, sg, n);
@@ -366,19 +374,38 @@
return n;
}
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n,
+ enum dma_data_direction dir, struct dma_attrs *attrs)
{
mmu_release_scsi_sgl(dev, sg, n);
}
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int n, enum dma_data_direction dir)
{
+ BUG();
}
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int n, enum dma_data_direction dir)
{
+ BUG();
}
+struct dma_map_ops sbus_dma_ops = {
+ .alloc_coherent = sbus_alloc_coherent,
+ .free_coherent = sbus_free_coherent,
+ .map_page = sbus_map_page,
+ .unmap_page = sbus_unmap_page,
+ .map_sg = sbus_map_sg,
+ .unmap_sg = sbus_unmap_sg,
+ .sync_sg_for_cpu = sbus_sync_sg_for_cpu,
+ .sync_sg_for_device = sbus_sync_sg_for_device,
+};
+
+struct dma_map_ops *dma_ops = &sbus_dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
static int __init sparc_register_ioport(void)
{
register_proc_sparc_ioport();
@@ -395,7 +422,8 @@
/* Allocate and map kernel buffer using consistent mode DMA for a device.
* hwdev should be valid struct pci_dev pointer for PCI devices.
*/
-void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
+static void *pci32_alloc_coherent(struct device *dev, size_t len,
+ dma_addr_t *pba, gfp_t gfp)
{
unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
unsigned long va;
@@ -439,7 +467,6 @@
*pba = virt_to_phys(va); /* equals virt_to_bus (R.I.P.) for us. */
return (void *) res->start;
}
-EXPORT_SYMBOL(pci_alloc_consistent);
/* Free and unmap a consistent DMA buffer.
* cpu_addr is what was returned from pci_alloc_consistent,
@@ -449,7 +476,8 @@
* References to the memory and mappings associated with cpu_addr/dma_addr
* past this call are illegal.
*/
-void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
+static void pci32_free_coherent(struct device *dev, size_t n, void *p,
+ dma_addr_t ba)
{
struct resource *res;
unsigned long pgp;
@@ -481,60 +509,18 @@
free_pages(pgp, get_order(n));
}
-EXPORT_SYMBOL(pci_free_consistent);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_* is performed.
- */
-dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
- int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
- /* IIep is write-through, not flushing. */
- return virt_to_phys(ptr);
-}
-EXPORT_SYMBOL(pci_map_single);
-
-/* Unmap a single streaming mode DMA translation. The dma_addr and size
- * must match what was provided for in a previous pci_map_single call. All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size,
- int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
- mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
- (size + PAGE_SIZE-1) & PAGE_MASK);
- }
-}
-EXPORT_SYMBOL(pci_unmap_single);
/*
* Same as pci_map_single, but with pages.
*/
-dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
+static dma_addr_t pci32_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
- BUG_ON(direction == PCI_DMA_NONE);
/* IIep is write-through, not flushing. */
return page_to_phys(page) + offset;
}
-EXPORT_SYMBOL(pci_map_page);
-
-void pci_unmap_page(struct pci_dev *hwdev,
- dma_addr_t dma_address, size_t size, int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
- /* mmu_inval_dma_area XXX */
-}
-EXPORT_SYMBOL(pci_unmap_page);
/* Map a set of buffers described by scatterlist in streaming
* mode for DMA. This is the scather-gather version of the
@@ -551,13 +537,13 @@
* Device ownership issues as mentioned above for pci_map_single are
* the same here.
*/
-int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
- int direction)
+static int pci32_map_sg(struct device *device, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
/* IIep is write-through, not flushing. */
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
@@ -566,20 +552,19 @@
}
return nents;
}
-EXPORT_SYMBOL(pci_map_sg);
/* Unmap a set of streaming mode DMA translations.
* Again, cpu read rules concerning calls here are the same as for
* pci_unmap_single() above.
*/
-void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
- int direction)
+static void pci32_unmap_sg(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
mmu_inval_dma_area(
@@ -588,7 +573,6 @@
}
}
}
-EXPORT_SYMBOL(pci_unmap_sg);
/* Make physical memory consistent for a single
* streaming mode DMA translation before or after a transfer.
@@ -600,25 +584,23 @@
* must first perform a pci_dma_sync_for_device, and then the
* device again owns the buffer.
*/
-void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+ size_t size, enum dma_data_direction dir)
{
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
(size + PAGE_SIZE-1) & PAGE_MASK);
}
}
-EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
-void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_device(struct device *dev, dma_addr_t ba,
+ size_t size, enum dma_data_direction dir)
{
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
(size + PAGE_SIZE-1) & PAGE_MASK);
}
}
-EXPORT_SYMBOL(pci_dma_sync_single_for_device);
/* Make physical memory consistent for a set of streaming
* mode DMA translations after a transfer.
@@ -626,13 +608,13 @@
* The same as pci_dma_sync_single_* but for a scatter-gather list,
* same rules and usage.
*/
-void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
mmu_inval_dma_area(
@@ -641,15 +623,14 @@
}
}
}
-EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
-void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_device(struct device *device, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir)
{
struct scatterlist *sg;
int n;
- BUG_ON(direction == PCI_DMA_NONE);
- if (direction != PCI_DMA_TODEVICE) {
+ if (dir != PCI_DMA_TODEVICE) {
for_each_sg(sgl, sg, nents, n) {
BUG_ON(page_address(sg_page(sg)) == NULL);
mmu_inval_dma_area(
@@ -658,31 +639,78 @@
}
}
}
-EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
+
+struct dma_map_ops pci32_dma_ops = {
+ .alloc_coherent = pci32_alloc_coherent,
+ .free_coherent = pci32_free_coherent,
+ .map_page = pci32_map_page,
+ .map_sg = pci32_map_sg,
+ .unmap_sg = pci32_unmap_sg,
+ .sync_single_for_cpu = pci32_sync_single_for_cpu,
+ .sync_single_for_device = pci32_sync_single_for_device,
+ .sync_sg_for_cpu = pci32_sync_sg_for_cpu,
+ .sync_sg_for_device = pci32_sync_sg_for_device,
+};
+EXPORT_SYMBOL(pci32_dma_ops);
+
#endif /* CONFIG_PCI */
+/*
+ * Return whether the given PCI device DMA address mask can be
+ * supported properly. For example, if your device can only drive the
+ * low 24-bits during PCI bus mastering, then you would pass
+ * 0x00ffffff as the mask to this function.
+ */
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+ if (dev->bus == &pci_bus_type)
+ return 1;
+#endif
+ return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+ if (dev->bus == &pci_bus_type)
+ return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+
#ifdef CONFIG_PROC_FS
-static int
-_sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
- void *data)
+static int sparc_io_proc_show(struct seq_file *m, void *v)
{
- char *p = buf, *e = buf + length;
- struct resource *r;
+ struct resource *root = m->private, *r;
const char *nm;
- for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
- if (p + 32 >= e) /* Better than nothing */
- break;
+ for (r = root->child; r != NULL; r = r->sibling) {
if ((nm = r->name) == 0) nm = "???";
- p += sprintf(p, "%016llx-%016llx: %s\n",
+ seq_printf(m, "%016llx-%016llx: %s\n",
(unsigned long long)r->start,
(unsigned long long)r->end, nm);
}
- return p-buf;
+ return 0;
}
+static int sparc_io_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sparc_io_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations sparc_io_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = sparc_io_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif /* CONFIG_PROC_FS */
/*
@@ -707,7 +735,7 @@
static void register_proc_sparc_ioport(void)
{
#ifdef CONFIG_PROC_FS
- create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
- create_proc_read_entry("dvma_map",0,NULL,_sparc_io_get_info,&_sparc_dvma);
+ proc_create_data("io_map", 0, NULL, &sparc_io_proc_fops, &sparc_iomap);
+ proc_create_data("dvma_map", 0, NULL, &sparc_io_proc_fops, &_sparc_dvma);
#endif
}
diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c
index ad800b8..e1af437 100644
--- a/arch/sparc/kernel/irq_32.c
+++ b/arch/sparc/kernel/irq_32.c
@@ -45,6 +45,7 @@
#include <asm/pcic.h>
#include <asm/cacheflush.h>
#include <asm/irq_regs.h>
+#include <asm/leon.h>
#include "kernel.h"
#include "irq.h"
@@ -661,6 +662,10 @@
sun4d_init_IRQ();
break;
+ case sparc_leon:
+ leon_init_IRQ();
+ break;
+
default:
prom_printf("Cannot initialize IRQs on this Sun machine...");
break;
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index f0ee790..8daab33 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -886,7 +886,7 @@
* Therefore you cannot make any OBP calls, not even prom_printf,
* from these two routines.
*/
-static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
+static void __cpuinit notrace register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
{
unsigned long num_entries = (qmask + 1) / 64;
unsigned long status;
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index cef8def..3ea6e8c 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -151,12 +151,46 @@
* Must preserve %g1 and %g6 (TAG).
*/
kvmap_dtlb_tsb4m_miss:
- sethi %hi(kpte_linear_bitmap), %g2
+ /* Clear the PAGE_OFFSET top virtual bits, shift
+ * down to get PFN, and make sure PFN is in range.
+ */
+ sllx %g4, 21, %g5
+
+ /* Check to see if we know about valid memory at the 4MB
+ * chunk this physical address will reside within.
+ */
+ srlx %g5, 21 + 41, %g2
+ brnz,pn %g2, kvmap_dtlb_longpath
+ nop
+
+ /* This unconditional branch and delay-slot nop gets patched
+ * by the sethi sequence once the bitmap is properly setup.
+ */
+ .globl valid_addr_bitmap_insn
+valid_addr_bitmap_insn:
+ ba,pt %xcc, 2f
+ nop
+ .subsection 2
+ .globl valid_addr_bitmap_patch
+valid_addr_bitmap_patch:
+ sethi %hi(sparc64_valid_addr_bitmap), %g7
+ or %g7, %lo(sparc64_valid_addr_bitmap), %g7
+ .previous
+
+ srlx %g5, 21 + 22, %g2
+ srlx %g2, 6, %g5
+ and %g2, 63, %g2
+ sllx %g5, 3, %g5
+ ldx [%g7 + %g5], %g5
+ mov 1, %g7
+ sllx %g7, %g2, %g7
+ andcc %g5, %g7, %g0
+ be,pn %xcc, kvmap_dtlb_longpath
+
+2: sethi %hi(kpte_linear_bitmap), %g2
or %g2, %lo(kpte_linear_bitmap), %g2
- /* Clear the PAGE_OFFSET top virtual bits, then shift
- * down to get a 256MB physical address index.
- */
+ /* Get the 256MB physical address index. */
sllx %g4, 21, %g5
mov 1, %g7
srlx %g5, 21 + 28, %g5
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
new file mode 100644
index 0000000..54d8a5b
--- /dev/null
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/of_device.h>
+#include <asm/oplib.h>
+#include <asm/timer.h>
+#include <asm/prom.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
+
+#include "prom.h"
+#include "irq.h"
+
+struct leon3_irqctrl_regs_map *leon3_irqctrl_regs; /* interrupt controller base address, initialized by amba_init() */
+struct leon3_gptimer_regs_map *leon3_gptimer_regs; /* timer controller base address, initialized by amba_init() */
+struct amba_apb_device leon_percpu_timer_dev[16];
+
+int leondebug_irq_disable;
+int leon_debug_irqout;
+static int dummy_master_l10_counter;
+
+unsigned long leon3_gptimer_irq; /* interrupt controller irq number, initialized by amba_init() */
+unsigned int sparc_leon_eirq;
+#define LEON_IMASK ((&leon3_irqctrl_regs->mask[0]))
+
+/* Return the IRQ of the pending IRQ on the extended IRQ controller */
+int sparc_leon_eirq_get(int eirq, int cpu)
+{
+ return LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->intid[cpu]) & 0x1f;
+}
+
+irqreturn_t sparc_leon_eirq_isr(int dummy, void *dev_id)
+{
+ printk(KERN_ERR "sparc_leon_eirq_isr: ERROR EXTENDED IRQ\n");
+ return IRQ_HANDLED;
+}
+
+/* The extended IRQ controller has been found, this function registers it */
+void sparc_leon_eirq_register(int eirq)
+{
+ int irq;
+
+ /* Register a "BAD" handler for this interrupt, it should never happen */
+ irq = request_irq(eirq, sparc_leon_eirq_isr,
+ (IRQF_DISABLED | SA_STATIC_ALLOC), "extirq", NULL);
+
+ if (irq) {
+ printk(KERN_ERR
+ "sparc_leon_eirq_register: unable to attach IRQ%d\n",
+ eirq);
+ } else {
+ sparc_leon_eirq = eirq;
+ }
+
+}
+
+static inline unsigned long get_irqmask(unsigned int irq)
+{
+ unsigned long mask;
+
+ if (!irq || ((irq > 0xf) && !sparc_leon_eirq)
+ || ((irq > 0x1f) && sparc_leon_eirq)) {
+ printk(KERN_ERR
+ "leon_get_irqmask: false irq number: %d\n", irq);
+ mask = 0;
+ } else {
+ mask = LEON_HARD_INT(irq);
+ }
+ return mask;
+}
+
+static void leon_enable_irq(unsigned int irq_nr)
+{
+ unsigned long mask, flags;
+ mask = get_irqmask(irq_nr);
+ local_irq_save(flags);
+ LEON3_BYPASS_STORE_PA(LEON_IMASK,
+ (LEON3_BYPASS_LOAD_PA(LEON_IMASK) | (mask)));
+ local_irq_restore(flags);
+}
+
+static void leon_disable_irq(unsigned int irq_nr)
+{
+ unsigned long mask, flags;
+ mask = get_irqmask(irq_nr);
+ local_irq_save(flags);
+ LEON3_BYPASS_STORE_PA(LEON_IMASK,
+ (LEON3_BYPASS_LOAD_PA(LEON_IMASK) & ~(mask)));
+ local_irq_restore(flags);
+
+}
+
+void __init leon_init_timers(irq_handler_t counter_fn)
+{
+ int irq;
+
+ leondebug_irq_disable = 0;
+ leon_debug_irqout = 0;
+ master_l10_counter = (unsigned int *)&dummy_master_l10_counter;
+ dummy_master_l10_counter = 0;
+
+ if (leon3_gptimer_regs && leon3_irqctrl_regs) {
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
+ (((1000000 / 100) - 1)));
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
+
+ } else {
+ printk(KERN_ERR "No Timer/irqctrl found\n");
+ BUG();
+ }
+
+ irq = request_irq(leon3_gptimer_irq,
+ counter_fn,
+ (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+
+ if (irq) {
+ printk(KERN_ERR "leon_time_init: unable to attach IRQ%d\n",
+ LEON_INTERRUPT_TIMER1);
+ prom_halt();
+ }
+
+ if (leon3_gptimer_regs) {
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl,
+ LEON3_GPTIMER_EN |
+ LEON3_GPTIMER_RL |
+ LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+ }
+}
+
+void leon_clear_clock_irq(void)
+{
+}
+
+void leon_load_profile_irq(int cpu, unsigned int limit)
+{
+ BUG();
+}
+
+
+
+
+void __init leon_trans_init(struct device_node *dp)
+{
+ if (strcmp(dp->type, "cpu") == 0 && strcmp(dp->name, "<NULL>") == 0) {
+ struct property *p;
+ p = of_find_property(dp, "mid", (void *)0);
+ if (p) {
+ int mid;
+ dp->name = prom_early_alloc(5 + 1);
+ memcpy(&mid, p->value, p->length);
+ sprintf((char *)dp->name, "cpu%.2d", mid);
+ }
+ }
+}
+
+void __initdata (*prom_amba_init)(struct device_node *dp, struct device_node ***nextp) = 0;
+
+void __init leon_node_init(struct device_node *dp, struct device_node ***nextp)
+{
+ if (prom_amba_init &&
+ strcmp(dp->type, "ambapp") == 0 &&
+ strcmp(dp->name, "ambapp0") == 0) {
+ prom_amba_init(dp, nextp);
+ }
+}
+
+void __init leon_init_IRQ(void)
+{
+ sparc_init_timers = leon_init_timers;
+
+ BTFIXUPSET_CALL(enable_irq, leon_enable_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(disable_irq, leon_disable_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(enable_pil_irq, leon_enable_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(disable_pil_irq, leon_disable_irq, BTFIXUPCALL_NORM);
+
+ BTFIXUPSET_CALL(clear_clock_irq, leon_clear_clock_irq,
+ BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(load_profile_irq, leon_load_profile_irq,
+ BTFIXUPCALL_NOP);
+
+#ifdef CONFIG_SMP
+ BTFIXUPSET_CALL(set_cpu_int, leon_set_cpu_int, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(clear_cpu_int, leon_clear_ipi, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(set_irq_udt, leon_set_udt, BTFIXUPCALL_NORM);
+#endif
+
+}
+
+void __init leon_init(void)
+{
+ prom_build_more = &leon_node_init;
+}
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 2c0cc72..378eb53 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/smp.h>
+#include <asm/perf_counter.h>
#include <asm/ptrace.h>
#include <asm/local.h>
#include <asm/pcr.h>
@@ -31,13 +32,19 @@
* level 14 as our IRQ off level.
*/
-static int nmi_watchdog_active;
static int panic_on_timeout;
-int nmi_usable;
-EXPORT_SYMBOL_GPL(nmi_usable);
+/* nmi_active:
+ * >0: the NMI watchdog is active, but can be disabled
+ * <0: the NMI watchdog has not been set up, and cannot be enabled
+ * 0: the NMI watchdog is disabled, but can be enabled
+ */
+atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
static unsigned int nmi_hz = HZ;
+static DEFINE_PER_CPU(short, wd_enabled);
+static int endflag __initdata;
static DEFINE_PER_CPU(unsigned int, last_irq_sum);
static DEFINE_PER_CPU(local_t, alert_counter);
@@ -45,7 +52,7 @@
void touch_nmi_watchdog(void)
{
- if (nmi_watchdog_active) {
+ if (atomic_read(&nmi_active)) {
int cpu;
for_each_present_cpu(cpu) {
@@ -78,6 +85,7 @@
if (do_panic || panic_on_oops)
panic("Non maskable interrupt");
+ nmi_exit();
local_irq_enable();
do_exit(SIGBUS);
}
@@ -92,6 +100,8 @@
local_cpu_data().__nmi_count++;
+ nmi_enter();
+
if (notify_die(DIE_NMI, "nmi", regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
touched = 1;
@@ -103,17 +113,19 @@
}
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
local_inc(&__get_cpu_var(alert_counter));
- if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+ if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz)
die_nmi("BUG: NMI Watchdog detected LOCKUP",
regs, panic_on_timeout);
} else {
__get_cpu_var(last_irq_sum) = sum;
local_set(&__get_cpu_var(alert_counter), 0);
}
- if (nmi_usable) {
+ if (__get_cpu_var(wd_enabled)) {
write_pic(picl_value(nmi_hz));
pcr_ops->write(pcr_enable);
}
+
+ nmi_exit();
}
static inline unsigned int get_nmi_count(int cpu)
@@ -121,8 +133,6 @@
return cpu_data(cpu).__nmi_count;
}
-static int endflag __initdata;
-
static __init void nmi_cpu_busy(void *data)
{
local_irq_enable_in_hardirq();
@@ -143,12 +153,15 @@
printk(KERN_WARNING
"and attach the output of the 'dmesg' command.\n");
- nmi_usable = 0;
+ per_cpu(wd_enabled, cpu) = 0;
+ atomic_dec(&nmi_active);
}
-static void stop_watchdog(void *unused)
+void stop_nmi_watchdog(void *unused)
{
pcr_ops->write(PCR_PIC_PRIV);
+ __get_cpu_var(wd_enabled) = 0;
+ atomic_dec(&nmi_active);
}
static int __init check_nmi_watchdog(void)
@@ -156,6 +169,9 @@
unsigned int *prev_nmi_count;
int cpu, err;
+ if (!atomic_read(&nmi_active))
+ return 0;
+
prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
if (!prev_nmi_count) {
err = -ENOMEM;
@@ -172,12 +188,15 @@
mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
for_each_online_cpu(cpu) {
+ if (!per_cpu(wd_enabled, cpu))
+ continue;
if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
report_broken_nmi(cpu, prev_nmi_count);
}
endflag = 1;
- if (!nmi_usable) {
+ if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
+ atomic_set(&nmi_active, -1);
err = -ENODEV;
goto error;
}
@@ -188,12 +207,26 @@
kfree(prev_nmi_count);
return 0;
error:
- on_each_cpu(stop_watchdog, NULL, 1);
+ on_each_cpu(stop_nmi_watchdog, NULL, 1);
return err;
}
-static void start_watchdog(void *unused)
+void start_nmi_watchdog(void *unused)
{
+ __get_cpu_var(wd_enabled) = 1;
+ atomic_inc(&nmi_active);
+
+ pcr_ops->write(PCR_PIC_PRIV);
+ write_pic(picl_value(nmi_hz));
+
+ pcr_ops->write(pcr_enable);
+}
+
+static void nmi_adjust_hz_one(void *unused)
+{
+ if (!__get_cpu_var(wd_enabled))
+ return;
+
pcr_ops->write(PCR_PIC_PRIV);
write_pic(picl_value(nmi_hz));
@@ -203,13 +236,13 @@
void nmi_adjust_hz(unsigned int new_hz)
{
nmi_hz = new_hz;
- on_each_cpu(start_watchdog, NULL, 1);
+ on_each_cpu(nmi_adjust_hz_one, NULL, 1);
}
EXPORT_SYMBOL_GPL(nmi_adjust_hz);
static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p)
{
- on_each_cpu(stop_watchdog, NULL, 1);
+ on_each_cpu(stop_nmi_watchdog, NULL, 1);
return 0;
}
@@ -221,18 +254,19 @@
{
int err;
- nmi_usable = 1;
-
- on_each_cpu(start_watchdog, NULL, 1);
+ on_each_cpu(start_nmi_watchdog, NULL, 1);
err = check_nmi_watchdog();
if (!err) {
err = register_reboot_notifier(&nmi_reboot_notifier);
if (err) {
- nmi_usable = 0;
- on_each_cpu(stop_watchdog, NULL, 1);
+ on_each_cpu(stop_nmi_watchdog, NULL, 1);
+ atomic_set(&nmi_active, -1);
}
}
+ if (!err)
+ init_hw_perf_counters();
+
return err;
}
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 9039670..4c26eb5 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -9,6 +9,8 @@
#include <linux/irq.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
#include "of_device_common.h"
@@ -97,6 +99,35 @@
return IORESOURCE_MEM;
}
+ /*
+ * AMBAPP bus specific translator
+ */
+
+static int of_bus_ambapp_match(struct device_node *np)
+{
+ return !strcmp(np->name, "ambapp");
+}
+
+static void of_bus_ambapp_count_cells(struct device_node *child,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 1;
+ if (sizec)
+ *sizec = 1;
+}
+
+static int of_bus_ambapp_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
+{
+ return of_bus_default_map(addr, range, na, ns, pna);
+}
+
+static unsigned long of_bus_ambapp_get_flags(const u32 *addr,
+ unsigned long flags)
+{
+ return IORESOURCE_MEM;
+}
/*
* Array of bus specific translators
@@ -121,6 +152,15 @@
.map = of_bus_default_map,
.get_flags = of_bus_sbus_get_flags,
},
+ /* AMBA */
+ {
+ .name = "ambapp",
+ .addr_prop_name = "reg",
+ .match = of_bus_ambapp_match,
+ .count_cells = of_bus_ambapp_count_cells,
+ .map = of_bus_ambapp_map,
+ .get_flags = of_bus_ambapp_get_flags,
+ },
/* Default */
{
.name = "default",
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 57859ad..c686486 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1039,7 +1039,7 @@
pci_dev_put(ali_isa_bridge);
}
-int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
+int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask)
{
u64 dma_addr_mask;
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 2485eaa..23c33ff 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -232,7 +232,8 @@
static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t sz,
- enum dma_data_direction direction)
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct iommu *iommu;
unsigned long flags, npages, oaddr;
@@ -296,7 +297,8 @@
}
static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
- size_t sz, enum dma_data_direction direction)
+ size_t sz, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct pci_pbm_info *pbm;
struct iommu *iommu;
@@ -336,7 +338,8 @@
}
static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct scatterlist *s, *outs, *segstart;
unsigned long flags, handle, prot;
@@ -478,7 +481,8 @@
}
static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction)
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct pci_pbm_info *pbm;
struct scatterlist *sg;
@@ -521,29 +525,13 @@
spin_unlock_irqrestore(&iommu->lock, flags);
}
-static void dma_4v_sync_single_for_cpu(struct device *dev,
- dma_addr_t bus_addr, size_t sz,
- enum dma_data_direction direction)
-{
- /* Nothing to do... */
-}
-
-static void dma_4v_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sglist, int nelems,
- enum dma_data_direction direction)
-{
- /* Nothing to do... */
-}
-
-static const struct dma_ops sun4v_dma_ops = {
+static struct dma_map_ops sun4v_dma_ops = {
.alloc_coherent = dma_4v_alloc_coherent,
.free_coherent = dma_4v_free_coherent,
.map_page = dma_4v_map_page,
.unmap_page = dma_4v_unmap_page,
.map_sg = dma_4v_map_sg,
.unmap_sg = dma_4v_unmap_sg,
- .sync_single_for_cpu = dma_4v_sync_single_for_cpu,
- .sync_sg_for_cpu = dma_4v_sync_sg_for_cpu,
};
static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 1ae8cdd..68ff001 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -7,6 +7,8 @@
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/perf_counter.h>
+
#include <asm/pil.h>
#include <asm/pcr.h>
#include <asm/nmi.h>
@@ -34,10 +36,20 @@
*/
void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
{
+ struct pt_regs *old_regs;
+
clear_softint(1 << PIL_DEFERRED_PCR_WORK);
+
+ old_regs = set_irq_regs(regs);
+ irq_enter();
+#ifdef CONFIG_PERF_COUNTERS
+ perf_counter_do_pending();
+#endif
+ irq_exit();
+ set_irq_regs(old_regs);
}
-void schedule_deferred_pcr_work(void)
+void set_perf_counter_pending(void)
{
set_softint(1 << PIL_DEFERRED_PCR_WORK);
}
diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
new file mode 100644
index 0000000..09de4035
--- /dev/null
+++ b/arch/sparc/kernel/perf_counter.c
@@ -0,0 +1,557 @@
+/* Performance counter support for sparc64.
+ *
+ * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ *
+ * This code is based almost entirely upon the x86 perf counter
+ * code, which is:
+ *
+ * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ * Copyright (C) 2009 Jaswinder Singh Rajput
+ * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ */
+
+#include <linux/perf_counter.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+
+#include <asm/cpudata.h>
+#include <asm/atomic.h>
+#include <asm/nmi.h>
+#include <asm/pcr.h>
+
+/* Sparc64 chips have two performance counters, 32-bits each, with
+ * overflow interrupts generated on transition from 0xffffffff to 0.
+ * The counters are accessed in one go using a 64-bit register.
+ *
+ * Both counters are controlled using a single control register. The
+ * only way to stop all sampling is to clear all of the context (user,
+ * supervisor, hypervisor) sampling enable bits. But these bits apply
+ * to both counters, thus the two counters can't be enabled/disabled
+ * individually.
+ *
+ * The control register has two event fields, one for each of the two
+ * counters. It's thus nearly impossible to have one counter going
+ * while keeping the other one stopped. Therefore it is possible to
+ * get overflow interrupts for counters not currently "in use" and
+ * that condition must be checked in the overflow interrupt handler.
+ *
+ * So we use a hack, in that we program inactive counters with the
+ * "sw_count0" and "sw_count1" events. These count how many times
+ * the instruction "sethi %hi(0xfc000), %g0" is executed. It's an
+ * unusual way to encode a NOP and therefore will not trigger in
+ * normal code.
+ */
+
+#define MAX_HWCOUNTERS 2
+#define MAX_PERIOD ((1UL << 32) - 1)
+
+#define PIC_UPPER_INDEX 0
+#define PIC_LOWER_INDEX 1
+
+struct cpu_hw_counters {
+ struct perf_counter *counters[MAX_HWCOUNTERS];
+ unsigned long used_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
+ unsigned long active_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
+ int enabled;
+};
+DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = { .enabled = 1, };
+
+struct perf_event_map {
+ u16 encoding;
+ u8 pic_mask;
+#define PIC_NONE 0x00
+#define PIC_UPPER 0x01
+#define PIC_LOWER 0x02
+};
+
+struct sparc_pmu {
+ const struct perf_event_map *(*event_map)(int);
+ int max_events;
+ int upper_shift;
+ int lower_shift;
+ int event_mask;
+ int hv_bit;
+ int irq_bit;
+ int upper_nop;
+ int lower_nop;
+};
+
+static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
+};
+
+static const struct perf_event_map *ultra3i_event_map(int event)
+{
+ return &ultra3i_perfmon_event_map[event];
+}
+
+static const struct sparc_pmu ultra3i_pmu = {
+ .event_map = ultra3i_event_map,
+ .max_events = ARRAY_SIZE(ultra3i_perfmon_event_map),
+ .upper_shift = 11,
+ .lower_shift = 4,
+ .event_mask = 0x3f,
+ .upper_nop = 0x1c,
+ .lower_nop = 0x14,
+};
+
+static const struct perf_event_map niagara2_perfmon_event_map[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0208, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x0302, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x0201, PIC_UPPER | PIC_LOWER },
+ [PERF_COUNT_HW_BRANCH_MISSES] = { 0x0202, PIC_UPPER | PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara2_event_map(int event)
+{
+ return &niagara2_perfmon_event_map[event];
+}
+
+static const struct sparc_pmu niagara2_pmu = {
+ .event_map = niagara2_event_map,
+ .max_events = ARRAY_SIZE(niagara2_perfmon_event_map),
+ .upper_shift = 19,
+ .lower_shift = 6,
+ .event_mask = 0xfff,
+ .hv_bit = 0x8,
+ .irq_bit = 0x03,
+ .upper_nop = 0x220,
+ .lower_nop = 0x220,
+};
+
+static const struct sparc_pmu *sparc_pmu __read_mostly;
+
+static u64 event_encoding(u64 event, int idx)
+{
+ if (idx == PIC_UPPER_INDEX)
+ event <<= sparc_pmu->upper_shift;
+ else
+ event <<= sparc_pmu->lower_shift;
+ return event;
+}
+
+static u64 mask_for_index(int idx)
+{
+ return event_encoding(sparc_pmu->event_mask, idx);
+}
+
+static u64 nop_for_index(int idx)
+{
+ return event_encoding(idx == PIC_UPPER_INDEX ?
+ sparc_pmu->upper_nop :
+ sparc_pmu->lower_nop, idx);
+}
+
+static inline void sparc_pmu_enable_counter(struct hw_perf_counter *hwc,
+ int idx)
+{
+ u64 val, mask = mask_for_index(idx);
+
+ val = pcr_ops->read();
+ pcr_ops->write((val & ~mask) | hwc->config);
+}
+
+static inline void sparc_pmu_disable_counter(struct hw_perf_counter *hwc,
+ int idx)
+{
+ u64 mask = mask_for_index(idx);
+ u64 nop = nop_for_index(idx);
+ u64 val = pcr_ops->read();
+
+ pcr_ops->write((val & ~mask) | nop);
+}
+
+void hw_perf_enable(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+ int i;
+
+ if (cpuc->enabled)
+ return;
+
+ cpuc->enabled = 1;
+ barrier();
+
+ val = pcr_ops->read();
+
+ for (i = 0; i < MAX_HWCOUNTERS; i++) {
+ struct perf_counter *cp = cpuc->counters[i];
+ struct hw_perf_counter *hwc;
+
+ if (!cp)
+ continue;
+ hwc = &cp->hw;
+ val |= hwc->config_base;
+ }
+
+ pcr_ops->write(val);
+}
+
+void hw_perf_disable(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+
+ val = pcr_ops->read();
+ val &= ~(PCR_UTRACE | PCR_STRACE |
+ sparc_pmu->hv_bit | sparc_pmu->irq_bit);
+ pcr_ops->write(val);
+}
+
+static u32 read_pmc(int idx)
+{
+ u64 val;
+
+ read_pic(val);
+ if (idx == PIC_UPPER_INDEX)
+ val >>= 32;
+
+ return val & 0xffffffff;
+}
+
+static void write_pmc(int idx, u64 val)
+{
+ u64 shift, mask, pic;
+
+ shift = 0;
+ if (idx == PIC_UPPER_INDEX)
+ shift = 32;
+
+ mask = ((u64) 0xffffffff) << shift;
+ val <<= shift;
+
+ read_pic(pic);
+ pic &= ~mask;
+ pic |= val;
+ write_pic(pic);
+}
+
+static int sparc_perf_counter_set_period(struct perf_counter *counter,
+ struct hw_perf_counter *hwc, int idx)
+{
+ s64 left = atomic64_read(&hwc->period_left);
+ s64 period = hwc->sample_period;
+ int ret = 0;
+
+ if (unlikely(left <= -period)) {
+ left = period;
+ atomic64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (unlikely(left <= 0)) {
+ left += period;
+ atomic64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+ if (left > MAX_PERIOD)
+ left = MAX_PERIOD;
+
+ atomic64_set(&hwc->prev_count, (u64)-left);
+
+ write_pmc(idx, (u64)(-left) & 0xffffffff);
+
+ perf_counter_update_userpage(counter);
+
+ return ret;
+}
+
+static int sparc_pmu_enable(struct perf_counter *counter)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ struct hw_perf_counter *hwc = &counter->hw;
+ int idx = hwc->idx;
+
+ if (test_and_set_bit(idx, cpuc->used_mask))
+ return -EAGAIN;
+
+ sparc_pmu_disable_counter(hwc, idx);
+
+ cpuc->counters[idx] = counter;
+ set_bit(idx, cpuc->active_mask);
+
+ sparc_perf_counter_set_period(counter, hwc, idx);
+ sparc_pmu_enable_counter(hwc, idx);
+ perf_counter_update_userpage(counter);
+ return 0;
+}
+
+static u64 sparc_perf_counter_update(struct perf_counter *counter,
+ struct hw_perf_counter *hwc, int idx)
+{
+ int shift = 64 - 32;
+ u64 prev_raw_count, new_raw_count;
+ s64 delta;
+
+again:
+ prev_raw_count = atomic64_read(&hwc->prev_count);
+ new_raw_count = read_pmc(idx);
+
+ if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = (new_raw_count << shift) - (prev_raw_count << shift);
+ delta >>= shift;
+
+ atomic64_add(delta, &counter->count);
+ atomic64_sub(delta, &hwc->period_left);
+
+ return new_raw_count;
+}
+
+static void sparc_pmu_disable(struct perf_counter *counter)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ struct hw_perf_counter *hwc = &counter->hw;
+ int idx = hwc->idx;
+
+ clear_bit(idx, cpuc->active_mask);
+ sparc_pmu_disable_counter(hwc, idx);
+
+ barrier();
+
+ sparc_perf_counter_update(counter, hwc, idx);
+ cpuc->counters[idx] = NULL;
+ clear_bit(idx, cpuc->used_mask);
+
+ perf_counter_update_userpage(counter);
+}
+
+static void sparc_pmu_read(struct perf_counter *counter)
+{
+ struct hw_perf_counter *hwc = &counter->hw;
+ sparc_perf_counter_update(counter, hwc, hwc->idx);
+}
+
+static void sparc_pmu_unthrottle(struct perf_counter *counter)
+{
+ struct hw_perf_counter *hwc = &counter->hw;
+ sparc_pmu_enable_counter(hwc, hwc->idx);
+}
+
+static atomic_t active_counters = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmc_grab_mutex);
+
+void perf_counter_grab_pmc(void)
+{
+ if (atomic_inc_not_zero(&active_counters))
+ return;
+
+ mutex_lock(&pmc_grab_mutex);
+ if (atomic_read(&active_counters) == 0) {
+ if (atomic_read(&nmi_active) > 0) {
+ on_each_cpu(stop_nmi_watchdog, NULL, 1);
+ BUG_ON(atomic_read(&nmi_active) != 0);
+ }
+ atomic_inc(&active_counters);
+ }
+ mutex_unlock(&pmc_grab_mutex);
+}
+
+void perf_counter_release_pmc(void)
+{
+ if (atomic_dec_and_mutex_lock(&active_counters, &pmc_grab_mutex)) {
+ if (atomic_read(&nmi_active) == 0)
+ on_each_cpu(start_nmi_watchdog, NULL, 1);
+ mutex_unlock(&pmc_grab_mutex);
+ }
+}
+
+static void hw_perf_counter_destroy(struct perf_counter *counter)
+{
+ perf_counter_release_pmc();
+}
+
+static int __hw_perf_counter_init(struct perf_counter *counter)
+{
+ struct perf_counter_attr *attr = &counter->attr;
+ struct hw_perf_counter *hwc = &counter->hw;
+ const struct perf_event_map *pmap;
+ u64 enc;
+
+ if (atomic_read(&nmi_active) < 0)
+ return -ENODEV;
+
+ if (attr->type != PERF_TYPE_HARDWARE)
+ return -EOPNOTSUPP;
+
+ if (attr->config >= sparc_pmu->max_events)
+ return -EINVAL;
+
+ perf_counter_grab_pmc();
+ counter->destroy = hw_perf_counter_destroy;
+
+ /* We save the enable bits in the config_base. So to
+ * turn off sampling just write 'config', and to enable
+ * things write 'config | config_base'.
+ */
+ hwc->config_base = sparc_pmu->irq_bit;
+ if (!attr->exclude_user)
+ hwc->config_base |= PCR_UTRACE;
+ if (!attr->exclude_kernel)
+ hwc->config_base |= PCR_STRACE;
+ if (!attr->exclude_hv)
+ hwc->config_base |= sparc_pmu->hv_bit;
+
+ if (!hwc->sample_period) {
+ hwc->sample_period = MAX_PERIOD;
+ hwc->last_period = hwc->sample_period;
+ atomic64_set(&hwc->period_left, hwc->sample_period);
+ }
+
+ pmap = sparc_pmu->event_map(attr->config);
+
+ enc = pmap->encoding;
+ if (pmap->pic_mask & PIC_UPPER) {
+ hwc->idx = PIC_UPPER_INDEX;
+ enc <<= sparc_pmu->upper_shift;
+ } else {
+ hwc->idx = PIC_LOWER_INDEX;
+ enc <<= sparc_pmu->lower_shift;
+ }
+
+ hwc->config |= enc;
+ return 0;
+}
+
+static const struct pmu pmu = {
+ .enable = sparc_pmu_enable,
+ .disable = sparc_pmu_disable,
+ .read = sparc_pmu_read,
+ .unthrottle = sparc_pmu_unthrottle,
+};
+
+const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
+{
+ int err = __hw_perf_counter_init(counter);
+
+ if (err)
+ return ERR_PTR(err);
+ return &pmu;
+}
+
+void perf_counter_print_debug(void)
+{
+ unsigned long flags;
+ u64 pcr, pic;
+ int cpu;
+
+ if (!sparc_pmu)
+ return;
+
+ local_irq_save(flags);
+
+ cpu = smp_processor_id();
+
+ pcr = pcr_ops->read();
+ read_pic(pic);
+
+ pr_info("\n");
+ pr_info("CPU#%d: PCR[%016llx] PIC[%016llx]\n",
+ cpu, pcr, pic);
+
+ local_irq_restore(flags);
+}
+
+static int __kprobes perf_counter_nmi_handler(struct notifier_block *self,
+ unsigned long cmd, void *__args)
+{
+ struct die_args *args = __args;
+ struct perf_sample_data data;
+ struct cpu_hw_counters *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ if (!atomic_read(&active_counters))
+ return NOTIFY_DONE;
+
+ switch (cmd) {
+ case DIE_NMI:
+ break;
+
+ default:
+ return NOTIFY_DONE;
+ }
+
+ regs = args->regs;
+
+ data.regs = regs;
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_counters);
+ for (idx = 0; idx < MAX_HWCOUNTERS; idx++) {
+ struct perf_counter *counter = cpuc->counters[idx];
+ struct hw_perf_counter *hwc;
+ u64 val;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+ hwc = &counter->hw;
+ val = sparc_perf_counter_update(counter, hwc, idx);
+ if (val & (1ULL << 31))
+ continue;
+
+ data.period = counter->hw.last_period;
+ if (!sparc_perf_counter_set_period(counter, hwc, idx))
+ continue;
+
+ if (perf_counter_overflow(counter, 1, &data))
+ sparc_pmu_disable_counter(hwc, idx);
+ }
+
+ return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
+ .notifier_call = perf_counter_nmi_handler,
+};
+
+static bool __init supported_pmu(void)
+{
+ if (!strcmp(sparc_pmu_type, "ultra3i")) {
+ sparc_pmu = &ultra3i_pmu;
+ return true;
+ }
+ if (!strcmp(sparc_pmu_type, "niagara2")) {
+ sparc_pmu = &niagara2_pmu;
+ return true;
+ }
+ return false;
+}
+
+void __init init_hw_perf_counters(void)
+{
+ pr_info("Performance counters: ");
+
+ if (!supported_pmu()) {
+ pr_cont("No support for PMU type '%s'\n", sparc_pmu_type);
+ return;
+ }
+
+ pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
+
+ /* All sparc64 PMUs currently have 2 counters. But this simple
+ * driver only supports one active counter at a time.
+ */
+ perf_max_counters = 1;
+
+ register_die_notifier(&perf_counter_nmi_notifier);
+}
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 4041f94..18d6785 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -251,7 +251,7 @@
}
}
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
{
struct thread_info *tp = current_thread_info();
struct pt_regs *regs = get_irq_regs();
@@ -304,7 +304,7 @@
static void sysrq_handle_globreg(int key, struct tty_struct *tty)
{
- __trigger_all_cpu_backtrace();
+ arch_trigger_all_cpu_backtrace();
}
static struct sysrq_key_op sparc_globalreg_op = {
diff --git a/arch/sparc/kernel/prom_32.c b/arch/sparc/kernel/prom_32.c
index fe43e80..0a37e8c 100644
--- a/arch/sparc/kernel/prom_32.c
+++ b/arch/sparc/kernel/prom_32.c
@@ -24,6 +24,8 @@
#include <asm/prom.h>
#include <asm/oplib.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
#include "prom.h"
@@ -131,6 +133,35 @@
regs->which_io, regs->phys_addr);
}
+/* "name:vendor:device@irq,addrlo" */
+static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
+{
+ struct amba_prom_registers *regs; unsigned int *intr;
+ unsigned int *device, *vendor;
+ struct property *prop;
+
+ prop = of_find_property(dp, "reg", NULL);
+ if (!prop)
+ return;
+ regs = prop->value;
+ prop = of_find_property(dp, "interrupts", NULL);
+ if (!prop)
+ return;
+ intr = prop->value;
+ prop = of_find_property(dp, "vendor", NULL);
+ if (!prop)
+ return;
+ vendor = prop->value;
+ prop = of_find_property(dp, "device", NULL);
+ if (!prop)
+ return;
+ device = prop->value;
+
+ sprintf(tmp_buf, "%s:%d:%d@%x,%x",
+ dp->name, *vendor, *device,
+ *intr, regs->phys_addr);
+}
+
static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
{
struct device_node *parent = dp->parent;
@@ -143,6 +174,8 @@
return sbus_path_component(dp, tmp_buf);
if (!strcmp(parent->type, "ebus"))
return ebus_path_component(dp, tmp_buf);
+ if (!strcmp(parent->type, "ambapp"))
+ return ambapp_path_component(dp, tmp_buf);
/* "isa" is handled with platform naming */
}
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 0fb5789..138910c 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -22,9 +22,12 @@
#include <linux/of.h>
#include <asm/prom.h>
#include <asm/oplib.h>
+#include <asm/leon.h>
#include "prom.h"
+void (*prom_build_more)(struct device_node *dp, struct device_node ***nextp);
+
struct device_node *of_console_device;
EXPORT_SYMBOL(of_console_device);
@@ -161,7 +164,7 @@
name = prom_nextprop(node, prev, p->name);
}
- if (strlen(name) == 0) {
+ if (!name || strlen(name) == 0) {
tmp = p;
return NULL;
}
@@ -242,7 +245,7 @@
return dp;
}
-static char * __init build_full_name(struct device_node *dp)
+char * __init build_full_name(struct device_node *dp)
{
int len, ourlen, plen;
char *n;
@@ -289,6 +292,9 @@
dp->child = prom_build_tree(dp, prom_getchild(node), nextp);
+ if (prom_build_more)
+ prom_build_more(dp, nextp);
+
node = prom_getsibling(node);
}
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 998cadb..16a47ff 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -235,6 +235,8 @@
sparc_cpu_model = sun4e;
if (!strcmp(&cputypval,"sun4u"))
sparc_cpu_model = sun4u;
+ if (!strncmp(&cputypval, "leon" , 4))
+ sparc_cpu_model = sparc_leon;
printk("ARCH: ");
switch(sparc_cpu_model) {
@@ -256,6 +258,9 @@
case sun4u:
printk("SUN4U\n");
break;
+ case sparc_leon:
+ printk("LEON\n");
+ break;
default:
printk("UNKNOWN!\n");
break;
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 181d069..7ce1a10 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -590,6 +590,8 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index ec82d76..647afbd 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -613,5 +613,8 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
+
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 54fb024..68791ca 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -162,9 +162,6 @@
*/
extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
void __init smp4d_boot_cpus(void)
{
@@ -235,25 +232,6 @@
*prev = first;
local_flush_cache_all();
- /* Free unneeded trap tables */
- ClearPageReserved(virt_to_page(trapbase_cpu1));
- init_page_count(virt_to_page(trapbase_cpu1));
- free_page((unsigned long)trapbase_cpu1);
- totalram_pages++;
- num_physpages++;
-
- ClearPageReserved(virt_to_page(trapbase_cpu2));
- init_page_count(virt_to_page(trapbase_cpu2));
- free_page((unsigned long)trapbase_cpu2);
- totalram_pages++;
- num_physpages++;
-
- ClearPageReserved(virt_to_page(trapbase_cpu3));
- init_page_count(virt_to_page(trapbase_cpu3));
- free_page((unsigned long)trapbase_cpu3);
- totalram_pages++;
- num_physpages++;
-
/* Ok, they are spinning and ready to go. */
smp_processors_ready = 1;
sun4d_distribute_irqs();
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 960b113..762d6ee 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -121,9 +121,6 @@
*/
extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
void __init smp4m_boot_cpus(void)
{
@@ -193,29 +190,6 @@
*prev = first;
local_flush_cache_all();
- /* Free unneeded trap tables */
- if (!cpu_isset(1, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu1));
- init_page_count(virt_to_page(trapbase_cpu1));
- free_page((unsigned long)trapbase_cpu1);
- totalram_pages++;
- num_physpages++;
- }
- if (!cpu_isset(2, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu2));
- init_page_count(virt_to_page(trapbase_cpu2));
- free_page((unsigned long)trapbase_cpu2);
- totalram_pages++;
- num_physpages++;
- }
- if (!cpu_isset(3, cpu_present_map)) {
- ClearPageReserved(virt_to_page(trapbase_cpu3));
- init_page_count(virt_to_page(trapbase_cpu3));
- free_page((unsigned long)trapbase_cpu3);
- totalram_pages++;
- num_physpages++;
- }
-
/* Ok, they are spinning and ready to go. */
}
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index f061c4d..e706113 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -121,7 +121,7 @@
SIGN1(sys32_umask, sys_umask, %o0)
SIGN3(sys32_tgkill, sys_tgkill, %o0, %o1, %o2)
SIGN1(sys32_sendto, sys_sendto, %o0)
-SIGN1(sys32_recvfrom, sys_recvfrom, %o0)
+SIGN1(sys32_recvfrom, compat_sys_recvfrom, %o0)
SIGN3(sys32_socket, sys_socket, %o0, %o1, %o2)
SIGN2(sys32_connect, sys_connect, %o0, %o2)
SIGN2(sys32_bind, sys_bind, %o0, %o2)
@@ -134,10 +134,12 @@
SIGN1(sys32_getsockname, sys_getsockname, %o0)
SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1)
SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
-SIGN2(sys32_splice, sys_splice, %o0, %o1)
+SIGN2(sys32_splice, sys_splice, %o0, %o2)
SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
SIGN2(sys32_tee, sys_tee, %o0, %o1)
SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
+SIGN1(sys32_truncate, sys_truncate, %o1)
+SIGN1(sys32_ftruncate, sys_ftruncate, %o1)
.globl sys32_mmap2
sys32_mmap2:
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index d28f496..ca39c60 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -2,6 +2,7 @@
*
* Copyright (C) 2007 David S. Miller <davem@davemloft.net>
*/
+#include <linux/sched.h>
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <linux/smp.h>
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 6909016..0418157 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -82,5 +82,5 @@
/*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
/*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo
+/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 6b3ee88..91b06b7 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -43,8 +43,8 @@
/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
.word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
/*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
- .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
+ .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate
+/*130*/ .word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
/*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
@@ -83,7 +83,7 @@
/*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
- .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo
+ .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_counter_open
#endif /* CONFIG_COMPAT */
@@ -158,4 +158,4 @@
/*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
- .word sys_pwritev, sys_rt_tgsigqueueinfo
+ .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 681abe0..79836a7 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -11,6 +11,7 @@
obj-y += generic_$(BITS).o
obj-$(CONFIG_SPARC32) += extable.o btfixup.o srmmu.o iommu.o io-unit.o
obj-$(CONFIG_SPARC32) += hypersparc.o viking.o tsunami.o swift.o
+obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
# Only used by sparc64
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index a5e30c6..b99f81c 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -319,9 +319,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", tsk->comm);
- if (from_user)
- do_group_exit(SIGKILL);
+ if (from_user) {
+ pagefault_out_of_memory();
+ return;
+ }
goto no_context;
do_sigbus:
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index e5620b2..43b0da9 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -447,9 +447,10 @@
out_of_memory:
insn = get_fault_insn(regs, insn);
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", current->comm);
- if (!(regs->tstate & TSTATE_PRIV))
- do_group_exit(SIGKILL);
+ if (!(regs->tstate & TSTATE_PRIV)) {
+ pagefault_out_of_memory();
+ return;
+ }
goto handle_kernel_fault;
intr_or_no_mm:
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 26bb391..54114ad 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -34,6 +34,7 @@
#include <asm/pgalloc.h> /* bug in asm-generic/tlb.h: check_pgt_cache */
#include <asm/tlb.h>
#include <asm/prom.h>
+#include <asm/leon.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -326,6 +327,9 @@
sparc_unmapped_base = 0xe0000000;
BTFIXUPSET_SETHI(sparc_unmapped_base, 0xe0000000);
break;
+ case sparc_leon:
+ leon_init();
+ /* fall through */
case sun4m:
case sun4d:
srmmu_paging_init();
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index ed6be6b..a70a5e1 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -145,7 +145,8 @@
cmp_p64, NULL);
}
-unsigned long *sparc64_valid_addr_bitmap __read_mostly;
+unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES /
+ sizeof(unsigned long)];
EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
/* Kernel physical address base and size in bytes. */
@@ -1874,7 +1875,7 @@
* memory list again, and make sure it provides at least as much
* memory as 'pavail' does.
*/
-static void __init setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap)
{
int i;
@@ -1897,8 +1898,7 @@
if (new_start <= old_start &&
new_end >= (old_start + PAGE_SIZE)) {
- set_bit(old_start >> 22,
- sparc64_valid_addr_bitmap);
+ set_bit(old_start >> 22, bitmap);
goto do_next_page;
}
}
@@ -1919,20 +1919,21 @@
}
}
+static void __init patch_tlb_miss_handler_bitmap(void)
+{
+ extern unsigned int valid_addr_bitmap_insn[];
+ extern unsigned int valid_addr_bitmap_patch[];
+
+ valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1];
+ mb();
+ valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0];
+ flushi(&valid_addr_bitmap_insn[0]);
+}
+
void __init mem_init(void)
{
unsigned long codepages, datapages, initpages;
unsigned long addr, last;
- int i;
-
- i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6);
- i += 1;
- sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3);
- if (sparc64_valid_addr_bitmap == NULL) {
- prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n");
- prom_halt();
- }
- memset(sparc64_valid_addr_bitmap, 0, i << 3);
addr = PAGE_OFFSET + kern_base;
last = PAGE_ALIGN(kern_size) + addr;
@@ -1941,15 +1942,19 @@
addr += PAGE_SIZE;
}
- setup_valid_addr_bitmap_from_pavail();
+ setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap);
+ patch_tlb_miss_handler_bitmap();
high_memory = __va(last_valid_pfn << PAGE_SHIFT);
#ifdef CONFIG_NEED_MULTIPLE_NODES
- for_each_online_node(i) {
- if (NODE_DATA(i)->node_spanned_pages != 0) {
- totalram_pages +=
- free_all_bootmem_node(NODE_DATA(i));
+ {
+ int i;
+ for_each_online_node(i) {
+ if (NODE_DATA(i)->node_spanned_pages != 0) {
+ totalram_pages +=
+ free_all_bootmem_node(NODE_DATA(i));
+ }
}
}
#else
diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h
index 1606387..c2f772d 100644
--- a/arch/sparc/mm/init_64.h
+++ b/arch/sparc/mm/init_64.h
@@ -5,10 +5,13 @@
* marked non-static so that assembler code can get at them.
*/
-#define MAX_PHYS_ADDRESS (1UL << 42UL)
-#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
+#define MAX_PHYS_ADDRESS (1UL << 41UL)
+#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
#define KPTE_BITMAP_BYTES \
((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+#define VALID_ADDR_BITMAP_CHUNK_SZ (4UL * 1024UL * 1024UL)
+#define VALID_ADDR_BITMAP_BYTES \
+ ((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8)
extern unsigned long kern_linear_pte_xor[2];
extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c
new file mode 100644
index 0000000..c0e0129
--- /dev/null
+++ b/arch/sparc/mm/leon_mm.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/sparc/mm/leon_m.c
+ *
+ * Copyright (C) 2004 Konrad Eisele (eiselekd@web.de, konrad@gaisler.com) Gaisler Research
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ *
+ * do srmmu probe in software
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+#include <asm/tlbflush.h>
+
+int leon_flush_during_switch = 1;
+int srmmu_swprobe_trace;
+
+unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr)
+{
+
+ unsigned int ctxtbl;
+ unsigned int pgd, pmd, ped;
+ unsigned int ptr;
+ unsigned int lvl, pte, paddrbase;
+ unsigned int ctx;
+ unsigned int paddr_calc;
+
+ paddrbase = 0;
+
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: trace on\n");
+
+ ctxtbl = srmmu_get_ctable_ptr();
+ if (!(ctxtbl)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: srmmu_get_ctable_ptr returned 0=>0\n");
+ return 0;
+ }
+ if (!_pfn_valid(PFN(ctxtbl))) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO
+ "swprobe: !_pfn_valid(%x)=>0\n",
+ PFN(ctxtbl));
+ return 0;
+ }
+
+ ctx = srmmu_get_context();
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: --- ctx (%x) ---\n", ctx);
+
+ pgd = LEON_BYPASS_LOAD_PA(ctxtbl + (ctx * 4));
+
+ if (((pgd & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: pgd is entry level 3\n");
+ lvl = 3;
+ pte = pgd;
+ paddrbase = pgd & _SRMMU_PTE_PMASK_LEON;
+ goto ready;
+ }
+ if (((pgd & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: pgd is invalid => 0\n");
+ return 0;
+ }
+
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: --- pgd (%x) ---\n", pgd);
+
+ ptr = (pgd & SRMMU_PTD_PMASK) << 4;
+ ptr += ((((vaddr) >> LEON_PGD_SH) & LEON_PGD_M) * 4);
+ if (!_pfn_valid(PFN(ptr)))
+ return 0;
+
+ pmd = LEON_BYPASS_LOAD_PA(ptr);
+ if (((pmd & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: pmd is entry level 2\n");
+ lvl = 2;
+ pte = pmd;
+ paddrbase = pmd & _SRMMU_PTE_PMASK_LEON;
+ goto ready;
+ }
+ if (((pmd & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: pmd is invalid => 0\n");
+ return 0;
+ }
+
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: --- pmd (%x) ---\n", pmd);
+
+ ptr = (pmd & SRMMU_PTD_PMASK) << 4;
+ ptr += (((vaddr >> LEON_PMD_SH) & LEON_PMD_M) * 4);
+ if (!_pfn_valid(PFN(ptr))) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: !_pfn_valid(%x)=>0\n",
+ PFN(ptr));
+ return 0;
+ }
+
+ ped = LEON_BYPASS_LOAD_PA(ptr);
+
+ if (((ped & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: ped is entry level 1\n");
+ lvl = 1;
+ pte = ped;
+ paddrbase = ped & _SRMMU_PTE_PMASK_LEON;
+ goto ready;
+ }
+ if (((ped & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: ped is invalid => 0\n");
+ return 0;
+ }
+
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: --- ped (%x) ---\n", ped);
+
+ ptr = (ped & SRMMU_PTD_PMASK) << 4;
+ ptr += (((vaddr >> LEON_PTE_SH) & LEON_PTE_M) * 4);
+ if (!_pfn_valid(PFN(ptr)))
+ return 0;
+
+ ptr = LEON_BYPASS_LOAD_PA(ptr);
+ if (((ptr & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: ptr is entry level 0\n");
+ lvl = 0;
+ pte = ptr;
+ paddrbase = ptr & _SRMMU_PTE_PMASK_LEON;
+ goto ready;
+ }
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: ptr is invalid => 0\n");
+ return 0;
+
+ready:
+ switch (lvl) {
+ case 0:
+ paddr_calc =
+ (vaddr & ~(-1 << LEON_PTE_SH)) | ((pte & ~0xff) << 4);
+ break;
+ case 1:
+ paddr_calc =
+ (vaddr & ~(-1 << LEON_PMD_SH)) | ((pte & ~0xff) << 4);
+ break;
+ case 2:
+ paddr_calc =
+ (vaddr & ~(-1 << LEON_PGD_SH)) | ((pte & ~0xff) << 4);
+ break;
+ default:
+ case 3:
+ paddr_calc = vaddr;
+ break;
+ }
+ if (srmmu_swprobe_trace)
+ printk(KERN_INFO "swprobe: padde %x\n", paddr_calc);
+ if (paddr)
+ *paddr = paddr_calc;
+ return paddrbase;
+}
+
+void leon_flush_icache_all(void)
+{
+ __asm__ __volatile__(" flush "); /*iflush*/
+}
+
+void leon_flush_dcache_all(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+ "i"(ASI_LEON_DFLUSH) : "memory");
+}
+
+void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page)
+{
+ if (vma->vm_flags & VM_EXEC)
+ leon_flush_icache_all();
+ leon_flush_dcache_all();
+}
+
+void leon_flush_cache_all(void)
+{
+ __asm__ __volatile__(" flush "); /*iflush*/
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+ "i"(ASI_LEON_DFLUSH) : "memory");
+}
+
+void leon_flush_tlb_all(void)
+{
+ leon_flush_cache_all();
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r"(0x400),
+ "i"(ASI_LEON_MMUFLUSH) : "memory");
+}
+
+/* get all cache regs */
+void leon3_getCacheRegs(struct leon3_cacheregs *regs)
+{
+ unsigned long ccr, iccr, dccr;
+
+ if (!regs)
+ return;
+ /* Get Cache regs from "Cache ASI" address 0x0, 0x8 and 0xC */
+ __asm__ __volatile__("lda [%%g0] %3, %0\n\t"
+ "mov 0x08, %%g1\n\t"
+ "lda [%%g1] %3, %1\n\t"
+ "mov 0x0c, %%g1\n\t"
+ "lda [%%g1] %3, %2\n\t"
+ : "=r"(ccr), "=r"(iccr), "=r"(dccr)
+ /* output */
+ : "i"(ASI_LEON_CACHEREGS) /* input */
+ : "g1" /* clobber list */
+ );
+ regs->ccr = ccr;
+ regs->iccr = iccr;
+ regs->dccr = dccr;
+}
+
+/* Due to virtual cache we need to check cache configuration if
+ * it is possible to skip flushing in some cases.
+ *
+ * Leon2 and Leon3 differ in their way of telling cache information
+ *
+ */
+int leon_flush_needed(void)
+{
+ int flush_needed = -1;
+ unsigned int ssize, sets;
+ char *setStr[4] =
+ { "direct mapped", "2-way associative", "3-way associative",
+ "4-way associative"
+ };
+ /* leon 3 */
+ struct leon3_cacheregs cregs;
+ leon3_getCacheRegs(&cregs);
+ sets = (cregs.dccr & LEON3_XCCR_SETS_MASK) >> 24;
+ /* (ssize=>realsize) 0=>1k, 1=>2k, 2=>4k, 3=>8k ... */
+ ssize = 1 << ((cregs.dccr & LEON3_XCCR_SSIZE_MASK) >> 20);
+
+ printk(KERN_INFO "CACHE: %s cache, set size %dk\n",
+ sets > 3 ? "unknown" : setStr[sets], ssize);
+ if ((ssize <= (PAGE_SIZE / 1024)) && (sets == 0)) {
+ /* Set Size <= Page size ==>
+ flush on every context switch not needed. */
+ flush_needed = 0;
+ printk(KERN_INFO "CACHE: not flushing on every context switch\n");
+ }
+ return flush_needed;
+}
+
+void leon_switch_mm(void)
+{
+ flush_tlb_mm((void *)0);
+ if (leon_flush_during_switch)
+ leon_flush_cache_all();
+}
diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c
index 652be05..82ec8f6 100644
--- a/arch/sparc/mm/loadmmu.c
+++ b/arch/sparc/mm/loadmmu.c
@@ -33,6 +33,7 @@
break;
case sun4m:
case sun4d:
+ case sparc_leon:
ld_mmu_srmmu();
break;
default:
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index ade4eb3..509b1ff 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -46,6 +46,7 @@
#include <asm/tsunami.h>
#include <asm/swift.h>
#include <asm/turbosparc.h>
+#include <asm/leon.h>
#include <asm/btfixup.h>
@@ -569,6 +570,9 @@
srmmu_ctxd_set(&srmmu_context_table[mm->context], mm->pgd);
}
+ if (sparc_cpu_model == sparc_leon)
+ leon_switch_mm();
+
if (is_hypersparc)
hyper_flush_whole_icache();
@@ -1977,6 +1981,45 @@
poke_srmmu = poke_viking;
}
+#ifdef CONFIG_SPARC_LEON
+
+void __init poke_leonsparc(void)
+{
+}
+
+void __init init_leon(void)
+{
+
+ srmmu_name = "Leon";
+
+ BTFIXUPSET_CALL(flush_cache_all, leon_flush_cache_all,
+ BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_cache_mm, leon_flush_cache_all,
+ BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_cache_page, leon_flush_pcache_all,
+ BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_cache_range, leon_flush_cache_all,
+ BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_page_for_dma, leon_flush_dcache_all,
+ BTFIXUPCALL_NORM);
+
+ BTFIXUPSET_CALL(flush_tlb_all, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_tlb_mm, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_tlb_page, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(flush_tlb_range, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+
+ BTFIXUPSET_CALL(__flush_page_to_ram, leon_flush_cache_all,
+ BTFIXUPCALL_NOP);
+ BTFIXUPSET_CALL(flush_sig_insns, leon_flush_cache_all, BTFIXUPCALL_NOP);
+
+ poke_srmmu = poke_leonsparc;
+
+ srmmu_cache_pagetables = 0;
+
+ leon_flush_during_switch = leon_flush_needed();
+}
+#endif
+
/* Probe for the srmmu chip version. */
static void __init get_srmmu_type(void)
{
@@ -1992,7 +2035,15 @@
psr_typ = (psr >> 28) & 0xf;
psr_vers = (psr >> 24) & 0xf;
- /* First, check for HyperSparc or Cypress. */
+ /* First, check for sparc-leon. */
+ if (sparc_cpu_model == sparc_leon) {
+ psr_typ = 0xf; /* hardcoded ids for older models/simulators */
+ psr_vers = 2;
+ init_leon();
+ return;
+ }
+
+ /* Second, check for HyperSparc or Cypress. */
if(mod_typ == 1) {
switch(mod_rev) {
case 7:
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index d172f86..f97cb8b 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -21,7 +21,7 @@
static int profile_timer_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
- struct die_args *args = (struct die_args *)data;
+ struct die_args *args = data;
int ret = NOTIFY_DONE;
switch (val) {
@@ -57,7 +57,7 @@
static int op_nmi_timer_init(struct oprofile_operations *ops)
{
- if (!nmi_usable)
+ if (atomic_read(&nmi_active) <= 0)
return -ENODEV;
ops->start = timer_start;
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index eedffb4..39fc6af 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -88,7 +88,7 @@
/* Drop into the prom, but completely terminate the program.
* No chance of continuing.
*/
-void prom_halt(void)
+void notrace prom_halt(void)
{
#ifdef CONFIG_SUN_LDOMS
if (ldom_domaining_enabled)
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index 660943e..ca86926 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -14,14 +14,14 @@
*/
#include <linux/kernel.h>
+#include <linux/compiler.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
static char ppbuf[1024];
-void
-prom_write(const char *buf, unsigned int n)
+void notrace prom_write(const char *buf, unsigned int n)
{
char ch;
@@ -33,8 +33,7 @@
}
}
-void
-prom_printf(const char *fmt, ...)
+void notrace prom_printf(const char *fmt, ...)
{
va_list args;
int i;
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 3b44b47..f114813 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -245,7 +245,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void uml_net_set_multicast_list(struct net_device *dev)
@@ -285,7 +285,7 @@
strcpy(info->version, "42");
}
-static struct ethtool_ops uml_net_ethtool_ops = {
+static const struct ethtool_ops uml_net_ethtool_ops = {
.get_drvinfo = uml_net_get_drvinfo,
.get_link = ethtool_op_get_link,
};
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 13ffa5d..fc20fdc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -38,7 +38,7 @@
select HAVE_FUNCTION_GRAPH_FP_TEST
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
- select HAVE_FTRACE_SYSCALLS
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_KVM
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
@@ -586,7 +586,6 @@
bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
- select AGP
depends on X86_64 && PCI
---help---
Support for full DMA access of devices with 32bit memory access only
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 8130334..527519b 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -262,6 +262,15 @@
family in /proc/cpuinfo. Newer ones have 6 and older ones 15
(not a typo)
+config MATOM
+ bool "Intel Atom"
+ ---help---
+
+ Select this for the Intel Atom platform. Intel Atom CPUs have an
+ in-order pipelining architecture and thus can benefit from
+ accordingly optimized code. Use a recent GCC with specific Atom
+ support in order to fully benefit from selecting this option.
+
config GENERIC_CPU
bool "Generic-x86-64"
depends on X86_64
@@ -295,7 +304,7 @@
config X86_L1_CACHE_BYTES
int
default "128" if MPSC
- default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32
+ default "64" if GENERIC_CPU || MK8 || MCORE2 || MATOM || X86_32
config X86_INTERNODE_CACHE_BYTES
int
@@ -310,7 +319,7 @@
default "7" if MPENTIUM4 || MPSC
default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
- default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU
+ default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
config X86_XADD
def_bool y
@@ -359,7 +368,7 @@
config X86_USE_PPRO_CHECKSUM
def_bool y
- depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
+ depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM
config X86_USE_3DNOW
def_bool y
@@ -387,7 +396,7 @@
config X86_TSC
def_bool y
- depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
+ depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
config X86_CMPXCHG64
def_bool y
@@ -397,7 +406,7 @@
# generates cmov.
config X86_CMOV
def_bool y
- depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64)
+ depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM)
config X86_MINIMUM_CPU_FAMILY
int
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659..7983c42 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -32,8 +32,8 @@
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
- KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
- echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+ KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
+ $(call cc-option,-fno-unit-at-a-time))
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
@@ -55,6 +55,8 @@
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+ cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
+ $(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
KBUILD_CFLAGS += $(cflags-y)
@@ -72,7 +74,7 @@
ifdef CONFIG_CC_STACKPROTECTOR
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
- ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+ ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
stackp-y := -fstack-protector
stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
KBUILD_CFLAGS += $(stackp-y)
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 80177ec..30e9a26 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -33,6 +33,8 @@
cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686)
cflags-$(CONFIG_MVIAC7) += -march=i686
cflags-$(CONFIG_MCORE2) += -march=i686 $(call tune,core2)
+cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom,$(call cc-option,-march=core2,-march=i686)) \
+ $(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
# AMD Elan support
cflags-$(CONFIG_X86_ELAN) += -march=i486
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index e2ff504..f8ed065 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 275dd17..11e8c6e 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -31,7 +31,6 @@
static int vesa_probe(void)
{
-#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
struct biosregs ireg, oreg;
u16 mode;
addr_t mode_ptr;
@@ -49,8 +48,7 @@
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
-#endif /* CONFIG_VIDEO_VESA || CONFIG_FIRMWARE_EDID */
-#ifdef CONFIG_VIDEO_VESA
+
set_fs(vginfo.video_mode_ptr.seg);
mode_ptr = vginfo.video_mode_ptr.off;
@@ -102,9 +100,6 @@
}
return nmodes;
-#else
- return 0;
-#endif /* CONFIG_VIDEO_VESA */
}
static int vesa_set_mode(struct mode_info *mode)
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 8f8d827..819caa1 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -47,14 +47,6 @@
initregs(&ireg);
-#ifdef CONFIG_VIDEO_400_HACK
- if (adapter >= ADAPTER_VGA) {
- ireg.ax = 0x1202;
- ireg.bx = 0x0030;
- intcall(0x10, &ireg, NULL);
- }
-#endif
-
ax = 0x0f00;
intcall(0x10, &ireg, &oreg);
mode = oreg.al;
@@ -62,11 +54,9 @@
set_fs(0);
rows = rdfs8(0x484); /* rows minus one */
-#ifndef CONFIG_VIDEO_400_HACK
if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
(rows == 0 || rows == 24))
return mode;
-#endif
if (mode != 3 && mode != 7)
mode = 3;
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index bad728b..d42da38 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -221,7 +221,6 @@
}
}
-#ifdef CONFIG_VIDEO_RETAIN
/* Save screen content to the heap */
static struct saved_screen {
int x, y;
@@ -299,10 +298,6 @@
ireg.dl = saved.curx;
intcall(0x10, &ireg, NULL);
}
-#else
-#define save_screen() ((void)0)
-#define restore_screen() ((void)0)
-#endif
void set_video(void)
{
diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h
index 5bb174a..ff339c5 100644
--- a/arch/x86/boot/video.h
+++ b/arch/x86/boot/video.h
@@ -17,19 +17,8 @@
#include <linux/types.h>
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* This code uses an extended set of video mode numbers. These include:
+/*
+ * This code uses an extended set of video mode numbers. These include:
* Aliases for standard modes
* NORMAL_VGA (-1)
* EXTENDED_VGA (-2)
@@ -67,13 +56,8 @@
/* The "recalculate timings" flag */
#define VIDEO_RECALC 0x8000
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
void store_screen(void);
#define DO_STORE() store_screen()
-#else
-#define DO_STORE() ((void)0)
-#endif /* CONFIG_VIDEO_RETAIN */
/*
* Mode table structures
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index edb992e..d28fad1 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -2355,7 +2355,7 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index cee1dd2..6c86acd 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -2329,7 +2329,7 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c580c5e..585edeb 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -59,13 +59,6 @@
asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
const u8 *in, unsigned int len, u8 *iv);
-static inline int kernel_fpu_using(void)
-{
- if (in_interrupt() && !(read_cr0() & X86_CR0_TS))
- return 1;
- return 0;
-}
-
static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
{
unsigned long addr = (unsigned long)raw_ctx;
@@ -89,7 +82,7 @@
return -EINVAL;
}
- if (kernel_fpu_using())
+ if (irq_fpu_usable())
err = crypto_aes_expand_key(ctx, in_key, key_len);
else {
kernel_fpu_begin();
@@ -110,7 +103,7 @@
{
struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
- if (kernel_fpu_using())
+ if (irq_fpu_usable())
crypto_aes_encrypt_x86(ctx, dst, src);
else {
kernel_fpu_begin();
@@ -123,7 +116,7 @@
{
struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
- if (kernel_fpu_using())
+ if (irq_fpu_usable())
crypto_aes_decrypt_x86(ctx, dst, src);
else {
kernel_fpu_begin();
@@ -349,7 +342,7 @@
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (kernel_fpu_using()) {
+ if (irq_fpu_usable()) {
struct ablkcipher_request *cryptd_req =
ablkcipher_request_ctx(req);
memcpy(cryptd_req, req, sizeof(*req));
@@ -370,7 +363,7 @@
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (kernel_fpu_using()) {
+ if (irq_fpu_usable()) {
struct ablkcipher_request *cryptd_req =
ablkcipher_request_ctx(req);
memcpy(cryptd_req, req, sizeof(*req));
@@ -636,7 +629,7 @@
int err;
if (!cpu_has_aes) {
- printk(KERN_ERR "Intel AES-NI instructions are not detected.\n");
+ printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
return -ENODEV;
}
if ((err = crypto_register_alg(&aesni_alg)))
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e590261..ba331bf 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -537,7 +537,7 @@
.quad sys_mkdir
.quad sys_rmdir /* 40 */
.quad sys_dup
- .quad sys32_pipe
+ .quad sys_pipe
.quad compat_sys_times
.quad quiet_ni_syscall /* old prof syscall holder */
.quad sys_brk /* 45 */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 085a8c3..9f55271 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -189,20 +189,6 @@
return sys_mprotect(start, len, prot);
}
-asmlinkage long sys32_pipe(int __user *fd)
-{
- int retval;
- int fds[2];
-
- retval = do_pipe_flags(fds, 0);
- if (retval)
- goto out;
- if (copy_to_user(fd, fds, sizeof(fds)))
- retval = -EFAULT;
-out:
- return retval;
-}
-
asmlinkage long sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
struct sigaction32 __user *oact,
unsigned int sigsetsize)
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 1a37bcd..c240efc 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -73,8 +73,6 @@
static inline void alternatives_smp_switch(int smp) {}
#endif /* CONFIG_SMP */
-const unsigned char *const *find_nop_table(void);
-
/* alternative assembly primitive: */
#define ALTERNATIVE(oldinstr, newinstr, feature) \
\
@@ -144,8 +142,6 @@
#define __parainstructions_end NULL
#endif
-extern void add_nops(void *insns, unsigned int len);
-
/*
* Clear and restore the kernel write-protection flag on the local CPU.
* Allows the kernel to edit read-only pages.
@@ -161,10 +157,7 @@
* Intel's errata.
* On the local CPU you need to be protected again NMI or MCE handlers seeing an
* inconsistent instruction while you patch.
- * The _early version expects the memory to already be RW.
*/
-
extern void *text_poke(void *addr, const void *opcode, size_t len);
-extern void *text_poke_early(void *addr, const void *opcode, size_t len);
#endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index bdf96f1..ac95995 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -25,6 +25,7 @@
#ifdef CONFIG_AMD_IOMMU
extern int amd_iommu_init(void);
extern int amd_iommu_init_dma_ops(void);
+extern int amd_iommu_init_passthrough(void);
extern void amd_iommu_detect(void);
extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
extern void amd_iommu_flush_all_domains(void);
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878ca..2a2cc7a 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -143,22 +143,29 @@
#define EVT_BUFFER_SIZE 8192 /* 512 entries */
#define EVT_LEN_MASK (0x9ULL << 56)
+#define PAGE_MODE_NONE 0x00
#define PAGE_MODE_1_LEVEL 0x01
#define PAGE_MODE_2_LEVEL 0x02
#define PAGE_MODE_3_LEVEL 0x03
+#define PAGE_MODE_4_LEVEL 0x04
+#define PAGE_MODE_5_LEVEL 0x05
+#define PAGE_MODE_6_LEVEL 0x06
-#define IOMMU_PDE_NL_0 0x000ULL
-#define IOMMU_PDE_NL_1 0x200ULL
-#define IOMMU_PDE_NL_2 0x400ULL
-#define IOMMU_PDE_NL_3 0x600ULL
+#define PM_LEVEL_SHIFT(x) (12 + ((x) * 9))
+#define PM_LEVEL_SIZE(x) (((x) < 6) ? \
+ ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
+ (0xffffffffffffffffULL))
+#define PM_LEVEL_INDEX(x, a) (((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
+#define PM_LEVEL_ENC(x) (((x) << 9) & 0xe00ULL)
+#define PM_LEVEL_PDE(x, a) ((a) | PM_LEVEL_ENC((x)) | \
+ IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define PM_PTE_LEVEL(pte) (((pte) >> 9) & 0x7ULL)
-#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
-#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
-#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
-
-#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
-#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
-#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
+#define PM_MAP_4k 0
+#define PM_ADDR_MASK 0x000ffffffffff000ULL
+#define PM_MAP_MASK(lvl) (PM_ADDR_MASK & \
+ (~((1ULL << (12 + ((lvl) * 9))) - 1)))
+#define PM_ALIGNED(lvl, addr) ((PM_MAP_MASK(lvl) & (addr)) == (addr))
#define IOMMU_PTE_P (1ULL << 0)
#define IOMMU_PTE_TV (1ULL << 1)
@@ -167,11 +174,6 @@
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
-#define IOMMU_L1_PDE(address) \
- ((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-#define IOMMU_L2_PDE(address) \
- ((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-
#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
@@ -194,11 +196,14 @@
#define PD_DMA_OPS_MASK (1UL << 0) /* domain used for dma_ops */
#define PD_DEFAULT_MASK (1UL << 1) /* domain is a default dma_ops
domain for an IOMMU */
+#define PD_PASSTHROUGH_MASK (1UL << 2) /* domain has no page
+ translation */
+
extern bool amd_iommu_dump;
#define DUMP_printk(format, arg...) \
do { \
if (amd_iommu_dump) \
- printk(KERN_INFO "AMD IOMMU: " format, ## arg); \
+ printk(KERN_INFO "AMD-Vi: " format, ## arg); \
} while(0);
/*
@@ -226,6 +231,7 @@
int mode; /* paging mode (0-6 levels) */
u64 *pt_root; /* page table root pointer */
unsigned long flags; /* flags to find out type of domain */
+ bool updated; /* complete domain flush required */
unsigned dev_cnt; /* devices assigned to this domain */
void *priv; /* private data */
};
@@ -337,6 +343,9 @@
/* if one, we need to send a completion wait command */
bool need_sync;
+ /* becomes true if a command buffer reset is running */
+ bool reset_in_progress;
+
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
};
@@ -457,4 +466,7 @@
#endif /* CONFIG_AMD_IOMMU_STATS */
+/* some function prototypes */
+extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
+
#endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bb7d479..586b7ad 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -183,6 +183,10 @@
}
#define x2apic_supported() (cpu_has_x2apic)
+static inline void x2apic_force_phys(void)
+{
+ x2apic_phys = 1;
+}
#else
static inline void check_x2apic(void)
{
@@ -194,6 +198,9 @@
{
return 0;
}
+static inline void x2apic_force_phys(void)
+{
+}
#define x2apic_preenabled 0
#define x2apic_supported() 0
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 7ddb36a..3b62da9 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -8,12 +8,14 @@
* Ingo Molnar <mingo@redhat.com>, 1999, 2000
*/
-#define APIC_DEFAULT_PHYS_BASE 0xfee00000
+#define IO_APIC_DEFAULT_PHYS_BASE 0xfec00000
+#define APIC_DEFAULT_PHYS_BASE 0xfee00000
#define APIC_ID 0x20
#define APIC_LVR 0x30
#define APIC_LVR_MASK 0xFF00FF
+#define APIC_LVR_DIRECTED_EOI (1 << 24)
#define GET_APIC_VERSION(x) ((x) & 0xFFu)
#define GET_APIC_MAXLVT(x) (((x) >> 16) & 0xFFu)
#ifdef CONFIG_X86_32
@@ -40,6 +42,7 @@
#define APIC_DFR_CLUSTER 0x0FFFFFFFul
#define APIC_DFR_FLAT 0xFFFFFFFFul
#define APIC_SPIV 0xF0
+#define APIC_SPIV_DIRECTED_EOI (1 << 12)
#define APIC_SPIV_FOCUS_DISABLED (1 << 9)
#define APIC_SPIV_APIC_ENABLED (1 << 8)
#define APIC_ISR 0x100
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 56be78f..b3ed1e1 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -3,7 +3,7 @@
#ifdef __ASSEMBLY__
# define __ASM_FORM(x) x
-# define __ASM_EX_SEC .section __ex_table
+# define __ASM_EX_SEC .section __ex_table, "a"
#else
# define __ASM_FORM(x) " " #x " "
# define __ASM_EX_SEC " .section __ex_table,\"a\"\n"
@@ -38,10 +38,18 @@
#define _ASM_DI __ASM_REG(di)
/* Exception table entry */
+#ifdef __ASSEMBLY__
+# define _ASM_EXTABLE(from,to) \
+ __ASM_EX_SEC ; \
+ _ASM_ALIGN ; \
+ _ASM_PTR from , to ; \
+ .previous
+#else
# define _ASM_EXTABLE(from,to) \
__ASM_EX_SEC \
_ASM_ALIGN "\n" \
_ASM_PTR #from "," #to "\n" \
" .previous\n"
+#endif
#endif /* _ASM_X86_ASM_H */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4a28d22..847fee6 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -95,6 +95,7 @@
#define X86_FEATURE_NONSTOP_TSC (3*32+24) /* TSC does not stop in C states */
#define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
#define X86_FEATURE_EXTD_APICID (3*32+26) /* has extended APICID (8 bits) */
+#define X86_FEATURE_AMD_DCM (3*32+27) /* multi-node processor */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */
diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
index c68c361..4d447b7 100644
--- a/arch/x86/include/asm/current.h
+++ b/arch/x86/include/asm/current.h
@@ -11,7 +11,7 @@
static __always_inline struct task_struct *get_current(void)
{
- return percpu_read(current_task);
+ return percpu_read_stable(current_task);
}
#define current get_current()
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index c993e9e..e8de2f6 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -291,11 +291,24 @@
return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
}
+static inline void set_desc_base(struct desc_struct *desc, unsigned long base)
+{
+ desc->base0 = base & 0xffff;
+ desc->base1 = (base >> 16) & 0xff;
+ desc->base2 = (base >> 24) & 0xff;
+}
+
static inline unsigned long get_desc_limit(const struct desc_struct *desc)
{
return desc->limit0 | (desc->limit << 16);
}
+static inline void set_desc_limit(struct desc_struct *desc, unsigned long limit)
+{
+ desc->limit0 = limit & 0xffff;
+ desc->limit = (limit >> 16) & 0xf;
+}
+
static inline void _set_gate(int gate, unsigned type, void *addr,
unsigned dpl, unsigned ist, unsigned seg)
{
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index a6adefa..9d66848 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -34,6 +34,12 @@
};
} __attribute__((packed));
+#define GDT_ENTRY_INIT(flags, base, limit) { { { \
+ .a = ((limit) & 0xffff) | (((base) & 0xffff) << 16), \
+ .b = (((base) & 0xff0000) >> 16) | (((flags) & 0xf0ff) << 8) | \
+ ((limit) & 0xf0000) | ((base) & 0xff000000), \
+ } } }
+
enum {
GATE_INTERRUPT = 0xE,
GATE_TRAP = 0xF,
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 1c3f943..0ee770d 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -55,6 +55,24 @@
extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_addr, gfp_t flag);
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ return addr + size <= *dev->dma_mask;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr;
+}
+
static inline void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 3afc5e8..ae6253a 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -87,9 +87,25 @@
CFI_RESTORE \reg
.endm
#else /*!CONFIG_X86_64*/
+ .macro pushl_cfi reg
+ pushl \reg
+ CFI_ADJUST_CFA_OFFSET 4
+ .endm
- /* 32bit defenitions are missed yet */
+ .macro popl_cfi reg
+ popl \reg
+ CFI_ADJUST_CFA_OFFSET -4
+ .endm
+ .macro movl_cfi reg offset=0
+ movl %\reg, \offset(%esp)
+ CFI_REL_OFFSET \reg, \offset
+ .endm
+
+ .macro movl_cfi_restore offset reg
+ movl \offset(%esp), %\reg
+ CFI_RESTORE \reg
+ .endm
#endif /*!CONFIG_X86_64*/
#endif /*__ASSEMBLY__*/
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index bd2c651..db24c22 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -28,13 +28,6 @@
#endif
-/* FIXME: I don't want to stay hardcoded */
-#ifdef CONFIG_X86_64
-# define FTRACE_SYSCALL_MAX 296
-#else
-# define FTRACE_SYSCALL_MAX 333
-#endif
-
#ifdef CONFIG_FUNCTION_TRACER
#define MCOUNT_ADDR ((long)(mcount))
#define MCOUNT_INSN_SIZE 5 /* sizeof mcount call */
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 175adf5..0b20bbb 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -26,6 +26,7 @@
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
extern asmlinkage void math_state_restore(void);
+extern void __math_state_restore(void);
extern void init_thread_xstate(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
@@ -301,6 +302,14 @@
preempt_enable();
}
+static inline bool irq_fpu_usable(void)
+{
+ struct pt_regs *regs;
+
+ return !in_interrupt() || !(regs = get_irq_regs()) || \
+ user_mode(regs) || (read_cr0() & X86_CR0_TS);
+}
+
/*
* Some instructions like VIA's padlock instructions generate a spurious
* DNA fault but don't modify SSE registers. And these instructions
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee80..85232d3 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,11 +150,10 @@
#define io_apic_assign_pci_irqs \
(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */
struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@
int polarity, int vector, int pin);
extern void ioapic_write_entry(int apic, int pin,
struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+ int gsi_base;
+ int gsi_end;
+};
+extern struct mp_ioapic_gsi mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
index 0d5b23b7..ec34c76 100644
--- a/arch/x86/include/asm/ioctls.h
+++ b/arch/x86/include/asm/ioctls.h
@@ -1,94 +1 @@
-#ifndef _ASM_X86_IOCTLS_H
-#define _ASM_X86_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 0x2A, struct termios2)
-#define TCSETS2 _IOW('T', 0x2B, struct termios2)
-#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
-#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
-#define TIOCGRS485 0x542E
-#define TIOCSRS485 0x542F
-#define TIOCGPTN _IOR('T', 0x30, unsigned int)
- /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-#define TCGETX 0x5432 /* SYS5 TCGETX compatibility */
-#define TCSETX 0x5433
-#define TCSETXF 0x5434
-#define TCSETXW 0x5435
-
-#define FIONCLEX 0x5450
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_X86_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
index ee678fd..84c7e51 100644
--- a/arch/x86/include/asm/ipcbuf.h
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -1,28 +1 @@
-#ifndef _ASM_X86_IPCBUF_H
-#define _ASM_X86_IPCBUF_H
-
-/*
- * The ipc64_perm structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_X86_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index c6ccbe7..9e2b952 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -13,14 +13,13 @@
unsigned long flags;
/*
- * Note: this needs to be "=r" not "=rm", because we have the
- * stack offset from what gcc expects at the time the "pop" is
- * executed, and so a memory reference with respect to the stack
- * would end up using the wrong address.
+ * "=rm" is safe here, because "pop" adjusts the stack before
+ * it evaluates its effective address -- this is part of the
+ * documented behavior of the "pop" instruction.
*/
asm volatile("# __raw_save_flags\n\t"
"pushf ; pop %0"
- : "=r" (flags)
+ : "=rm" (flags)
: /* no input */
: "memory");
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 125be8b..4a5fe91 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -17,6 +17,8 @@
#define __KVM_HAVE_USER_NMI
#define __KVM_HAVE_GUEST_DEBUG
#define __KVM_HAVE_MSIX
+#define __KVM_HAVE_MCE
+#define __KVM_HAVE_PIT_STATE2
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
@@ -236,6 +238,14 @@
struct kvm_pit_channel_state channels[3];
};
+#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001
+
+struct kvm_pit_state2 {
+ struct kvm_pit_channel_state channels[3];
+ __u32 flags;
+ __u32 reserved[9];
+};
+
struct kvm_reinject_control {
__u8 pit_reinject;
__u8 reserved[31];
diff --git a/arch/x86/include/asm/kvm_x86_emulate.h b/arch/x86/include/asm/kvm_emulate.h
similarity index 100%
rename from arch/x86/include/asm/kvm_x86_emulate.h
rename to arch/x86/include/asm/kvm_emulate.h
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index eabdc1c..3be0004 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/mmu_notifier.h>
+#include <linux/tracepoint.h>
#include <linux/kvm.h>
#include <linux/kvm_para.h>
@@ -37,12 +38,14 @@
#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS | \
0xFFFFFF0000000000ULL)
-#define KVM_GUEST_CR0_MASK \
- (X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
- | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST \
+ (X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK \
+ (KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
+#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST \
+ (X86_CR0_WP | X86_CR0_NE | X86_CR0_TS | X86_CR0_MP)
#define KVM_VM_CR0_ALWAYS_ON \
- (X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
- | X86_CR0_MP)
+ (KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
#define KVM_GUEST_CR4_MASK \
(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
@@ -51,12 +54,12 @@
#define INVALID_PAGE (~(hpa_t)0)
#define UNMAPPED_GVA (~(gpa_t)0)
-/* shadow tables are PAE even on non-PAE hosts */
-#define KVM_HPAGE_SHIFT 21
-#define KVM_HPAGE_SIZE (1UL << KVM_HPAGE_SHIFT)
-#define KVM_HPAGE_MASK (~(KVM_HPAGE_SIZE - 1))
-
-#define KVM_PAGES_PER_HPAGE (KVM_HPAGE_SIZE / PAGE_SIZE)
+/* KVM Hugepage definitions for x86 */
+#define KVM_NR_PAGE_SIZES 3
+#define KVM_HPAGE_SHIFT(x) (PAGE_SHIFT + (((x) - 1) * 9))
+#define KVM_HPAGE_SIZE(x) (1UL << KVM_HPAGE_SHIFT(x))
+#define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1))
+#define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE)
#define DE_VECTOR 0
#define DB_VECTOR 1
@@ -120,6 +123,10 @@
NR_VCPU_REGS
};
+enum kvm_reg_ex {
+ VCPU_EXREG_PDPTR = NR_VCPU_REGS,
+};
+
enum {
VCPU_SREG_ES,
VCPU_SREG_CS,
@@ -131,7 +138,7 @@
VCPU_SREG_LDTR,
};
-#include <asm/kvm_x86_emulate.h>
+#include <asm/kvm_emulate.h>
#define KVM_NR_MEM_OBJS 40
@@ -308,7 +315,6 @@
struct {
gfn_t gfn; /* presumed gfn during guest pte update */
pfn_t pfn; /* pfn corresponding to that gfn */
- int largepage;
unsigned long mmu_seq;
} update_pte;
@@ -334,16 +340,6 @@
u8 nr;
} interrupt;
- struct {
- int vm86_active;
- u8 save_iopl;
- struct kvm_save_segment {
- u16 selector;
- unsigned long base;
- u32 limit;
- u32 ar;
- } tr, es, ds, fs, gs;
- } rmode;
int halt_request; /* real mode on Intel only */
int cpuid_nent;
@@ -366,13 +362,15 @@
u32 pat;
int switch_db_regs;
- unsigned long host_db[KVM_NR_DB_REGS];
- unsigned long host_dr6;
- unsigned long host_dr7;
unsigned long db[KVM_NR_DB_REGS];
unsigned long dr6;
unsigned long dr7;
unsigned long eff_db[KVM_NR_DB_REGS];
+
+ u64 mcg_cap;
+ u64 mcg_status;
+ u64 mcg_ctl;
+ u64 *mce_banks;
};
struct kvm_mem_alias {
@@ -409,6 +407,7 @@
struct page *ept_identity_pagetable;
bool ept_identity_pagetable_done;
+ gpa_t ept_identity_map_addr;
unsigned long irq_sources_bitmap;
unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
@@ -526,6 +525,9 @@
int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
int (*get_tdp_level)(void);
u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
+ bool (*gb_page_enable)(void);
+
+ const struct trace_print_flags *exit_reasons_str;
};
extern struct kvm_x86_ops *kvm_x86_ops;
@@ -618,6 +620,7 @@
void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
u32 error_code);
+bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl);
int kvm_pic_set_irq(void *opaque, int irq, int level);
@@ -752,8 +755,6 @@
kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
}
-#define MSR_IA32_TIME_STAMP_COUNTER 0x010
-
#define TSS_IOPB_BASE_OFFSET 0x66
#define TSS_BASE_SIZE 0x68
#define TSS_IOPB_SIZE (65536 / 8)
@@ -796,5 +797,8 @@
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
int kvm_age_hva(struct kvm *kvm, unsigned long hva);
int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
+int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
+int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
#endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index b8a3305..c584076 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -1,6 +1,8 @@
#ifndef _ASM_X86_KVM_PARA_H
#define _ASM_X86_KVM_PARA_H
+#include <linux/types.h>
+
/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It
* should be used to determine that a VM is running under KVM.
*/
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 5136dad..0d97deb 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -90,8 +90,9 @@
}
/* Full 4G segment descriptors, suitable for CS and DS. */
-#define FULL_EXEC_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9b00} } })
-#define FULL_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9300} } })
+#define FULL_EXEC_SEGMENT \
+ ((struct desc_struct)GDT_ENTRY_INIT(0xc09b, 0, 0xfffff))
+#define FULL_SEGMENT ((struct desc_struct)GDT_ENTRY_INIT(0xc093, 0, 0xfffff))
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 751af25..593e51d 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -1,20 +1,8 @@
#ifndef _ASM_X86_MMAN_H
#define _ASM_X86_MMAN_H
-#include <asm-generic/mman-common.h>
-
#define MAP_32BIT 0x40 /* only give out 32bit addresses */
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
+#include <asm-generic/mman.h>
#endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 47d6274..3e2ce58 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -1,18 +1,7 @@
#ifndef _ASM_X86_MODULE_H
#define _ASM_X86_MODULE_H
-/* x86_32/64 are simple */
-struct mod_arch_specific {};
-
-#ifdef CONFIG_X86_32
-# define Elf_Shdr Elf32_Shdr
-# define Elf_Sym Elf32_Sym
-# define Elf_Ehdr Elf32_Ehdr
-#else
-# define Elf_Shdr Elf64_Shdr
-# define Elf_Sym Elf64_Sym
-# define Elf_Ehdr Elf64_Ehdr
-#endif
+#include <asm-generic/module.h>
#ifdef CONFIG_X86_64
/* X86_64 does not define MODULE_PROC_FAMILY */
@@ -28,6 +17,8 @@
#define MODULE_PROC_FAMILY "586MMX "
#elif defined CONFIG_MCORE2
#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
#elif defined CONFIG_M686
#define MODULE_PROC_FAMILY "686 "
#elif defined CONFIG_MPENTIUMII
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
index 7e4e948..809134c 100644
--- a/arch/x86/include/asm/msgbuf.h
+++ b/arch/x86/include/asm/msgbuf.h
@@ -1,39 +1 @@
-#ifndef _ASM_X86_MSGBUF_H
-#define _ASM_X86_MSGBUF_H
-
-/*
- * The msqid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space on i386 is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- * Pad space on x8664 is left for:
- * - 2 miscellaneous 64-bit values
- */
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
-#ifdef __i386__
- unsigned long __unused1;
-#endif
- __kernel_time_t msg_rtime; /* last msgrcv time */
-#ifdef __i386__
- unsigned long __unused2;
-#endif
- __kernel_time_t msg_ctime; /* last change time */
-#ifdef __i386__
- unsigned long __unused3;
-#endif
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_X86_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 6be7fc2..bd55490 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -374,6 +374,7 @@
/* AMD-V MSRs */
#define MSR_VM_CR 0xc0010114
+#define MSR_VM_IGNNE 0xc0010115
#define MSR_VM_HSAVE_PA 0xc0010117
#endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 48ad9d2..7e2b6ba 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -3,10 +3,16 @@
#include <asm/msr-index.h>
-#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8])
+#define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8])
+
+#ifdef __KERNEL__
+
#include <asm/asm.h>
#include <asm/errno.h>
#include <asm/cpumask.h>
@@ -67,23 +73,7 @@
".previous\n\t"
_ASM_EXTABLE(2b, 3b)
: [err] "=r" (*err), EAX_EDX_RET(val, low, high)
- : "c" (msr), [fault] "i" (-EFAULT));
- return EAX_EDX_VAL(val, low, high);
-}
-
-static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
- int *err)
-{
- DECLARE_ARGS(val, low, high);
-
- asm volatile("2: rdmsr ; xor %0,%0\n"
- "1:\n\t"
- ".section .fixup,\"ax\"\n\t"
- "3: mov %3,%0 ; jmp 1b\n\t"
- ".previous\n\t"
- _ASM_EXTABLE(2b, 3b)
- : "=r" (*err), EAX_EDX_RET(val, low, high)
- : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
+ : "c" (msr), [fault] "i" (-EIO));
return EAX_EDX_VAL(val, low, high);
}
@@ -106,13 +96,16 @@
_ASM_EXTABLE(2b, 3b)
: [err] "=a" (err)
: "c" (msr), "0" (low), "d" (high),
- [fault] "i" (-EFAULT)
+ [fault] "i" (-EIO)
: "memory");
return err;
}
extern unsigned long long native_read_tsc(void);
+extern int native_rdmsr_safe_regs(u32 regs[8]);
+extern int native_wrmsr_safe_regs(u32 regs[8]);
+
static __always_inline unsigned long long __native_read_tsc(void)
{
DECLARE_ARGS(val, low, high);
@@ -181,14 +174,44 @@
*p = native_read_msr_safe(msr, &err);
return err;
}
+
static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
{
+ u32 gprs[8] = { 0 };
int err;
- *p = native_read_msr_amd_safe(msr, &err);
+ gprs[1] = msr;
+ gprs[7] = 0x9c5a203a;
+
+ err = native_rdmsr_safe_regs(gprs);
+
+ *p = gprs[0] | ((u64)gprs[2] << 32);
+
return err;
}
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+ u32 gprs[8] = { 0 };
+
+ gprs[0] = (u32)val;
+ gprs[1] = msr;
+ gprs[2] = val >> 32;
+ gprs[7] = 0x9c5a203a;
+
+ return native_wrmsr_safe_regs(gprs);
+}
+
+static inline int rdmsr_safe_regs(u32 regs[8])
+{
+ return native_rdmsr_safe_regs(regs);
+}
+
+static inline int wrmsr_safe_regs(u32 regs[8])
+{
+ return native_wrmsr_safe_regs(regs);
+}
+
#define rdtscl(low) \
((low) = (u32)__native_read_tsc())
@@ -228,6 +251,8 @@
void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
#else /* CONFIG_SMP */
static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
{
@@ -258,7 +283,15 @@
{
return wrmsr_safe(msr_no, l, h);
}
+static inline int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
+{
+ return rdmsr_safe_regs(regs);
+}
+static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
+{
+ return wrmsr_safe_regs(regs);
+}
#endif /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c86e5ed4..e63cf7d 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -45,8 +45,8 @@
void __user *, size_t *, loff_t *);
extern int unknown_nmi_panic;
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
static inline void localise_nmi_watchdog(void)
{
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
index 6f0d042..965d454 100644
--- a/arch/x86/include/asm/param.h
+++ b/arch/x86/include/asm/param.h
@@ -1,22 +1 @@
-#ifndef _ASM_X86_PARAM_H
-#define _ASM_X86_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* some user interfaces are */
-# define CLOCKS_PER_SEC (USER_HZ) /* in "ticks" like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_X86_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 4fb37c8..40d6586 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -7,689 +7,11 @@
#include <asm/pgtable_types.h>
#include <asm/asm.h>
-/* Bitmask of what can be clobbered: usually at least eax. */
-#define CLBR_NONE 0
-#define CLBR_EAX (1 << 0)
-#define CLBR_ECX (1 << 1)
-#define CLBR_EDX (1 << 2)
-#define CLBR_EDI (1 << 3)
-
-#ifdef CONFIG_X86_32
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY ((1 << 4) - 1)
-
-#define CLBR_ARG_REGS (CLBR_EAX | CLBR_EDX | CLBR_ECX)
-#define CLBR_RET_REG (CLBR_EAX | CLBR_EDX)
-#define CLBR_SCRATCH (0)
-#else
-#define CLBR_RAX CLBR_EAX
-#define CLBR_RCX CLBR_ECX
-#define CLBR_RDX CLBR_EDX
-#define CLBR_RDI CLBR_EDI
-#define CLBR_RSI (1 << 4)
-#define CLBR_R8 (1 << 5)
-#define CLBR_R9 (1 << 6)
-#define CLBR_R10 (1 << 7)
-#define CLBR_R11 (1 << 8)
-
-#define CLBR_ANY ((1 << 9) - 1)
-
-#define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \
- CLBR_RCX | CLBR_R8 | CLBR_R9)
-#define CLBR_RET_REG (CLBR_RAX)
-#define CLBR_SCRATCH (CLBR_R10 | CLBR_R11)
-
-#include <asm/desc_defs.h>
-#endif /* X86_64 */
-
-#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+#include <asm/paravirt_types.h>
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <linux/cpumask.h>
-#include <asm/kmap_types.h>
-#include <asm/desc_defs.h>
-
-struct page;
-struct thread_struct;
-struct desc_ptr;
-struct tss_struct;
-struct mm_struct;
-struct desc_struct;
-struct task_struct;
-
-/*
- * Wrapper type for pointers to code which uses the non-standard
- * calling convention. See PV_CALL_SAVE_REGS_THUNK below.
- */
-struct paravirt_callee_save {
- void *func;
-};
-
-/* general info */
-struct pv_info {
- unsigned int kernel_rpl;
- int shared_kernel_pmd;
- int paravirt_enabled;
- const char *name;
-};
-
-struct pv_init_ops {
- /*
- * Patch may replace one of the defined code sequences with
- * arbitrary code, subject to the same register constraints.
- * This generally means the code is not free to clobber any
- * registers other than EAX. The patch function should return
- * the number of bytes of code generated, as we nop pad the
- * rest in generic code.
- */
- unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
- unsigned long addr, unsigned len);
-
- /* Basic arch-specific setup */
- void (*arch_setup)(void);
- char *(*memory_setup)(void);
- void (*post_allocator_init)(void);
-
- /* Print a banner to identify the environment */
- void (*banner)(void);
-};
-
-
-struct pv_lazy_ops {
- /* Set deferred update mode, used for batching operations. */
- void (*enter)(void);
- void (*leave)(void);
-};
-
-struct pv_time_ops {
- void (*time_init)(void);
-
- /* Set and set time of day */
- unsigned long (*get_wallclock)(void);
- int (*set_wallclock)(unsigned long);
-
- unsigned long long (*sched_clock)(void);
- unsigned long (*get_tsc_khz)(void);
-};
-
-struct pv_cpu_ops {
- /* hooks for various privileged instructions */
- unsigned long (*get_debugreg)(int regno);
- void (*set_debugreg)(int regno, unsigned long value);
-
- void (*clts)(void);
-
- unsigned long (*read_cr0)(void);
- void (*write_cr0)(unsigned long);
-
- unsigned long (*read_cr4_safe)(void);
- unsigned long (*read_cr4)(void);
- void (*write_cr4)(unsigned long);
-
-#ifdef CONFIG_X86_64
- unsigned long (*read_cr8)(void);
- void (*write_cr8)(unsigned long);
-#endif
-
- /* Segment descriptor handling */
- void (*load_tr_desc)(void);
- void (*load_gdt)(const struct desc_ptr *);
- void (*load_idt)(const struct desc_ptr *);
- void (*store_gdt)(struct desc_ptr *);
- void (*store_idt)(struct desc_ptr *);
- void (*set_ldt)(const void *desc, unsigned entries);
- unsigned long (*store_tr)(void);
- void (*load_tls)(struct thread_struct *t, unsigned int cpu);
-#ifdef CONFIG_X86_64
- void (*load_gs_index)(unsigned int idx);
-#endif
- void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
- const void *desc);
- void (*write_gdt_entry)(struct desc_struct *,
- int entrynum, const void *desc, int size);
- void (*write_idt_entry)(gate_desc *,
- int entrynum, const gate_desc *gate);
- void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
- void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
-
- void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
-
- void (*set_iopl_mask)(unsigned mask);
-
- void (*wbinvd)(void);
- void (*io_delay)(void);
-
- /* cpuid emulation, mostly so that caps bits can be disabled */
- void (*cpuid)(unsigned int *eax, unsigned int *ebx,
- unsigned int *ecx, unsigned int *edx);
-
- /* MSR, PMC and TSR operations.
- err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
- u64 (*read_msr_amd)(unsigned int msr, int *err);
- u64 (*read_msr)(unsigned int msr, int *err);
- int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
-
- u64 (*read_tsc)(void);
- u64 (*read_pmc)(int counter);
- unsigned long long (*read_tscp)(unsigned int *aux);
-
- /*
- * Atomically enable interrupts and return to userspace. This
- * is only ever used to return to 32-bit processes; in a
- * 64-bit kernel, it's used for 32-on-64 compat processes, but
- * never native 64-bit processes. (Jump, not call.)
- */
- void (*irq_enable_sysexit)(void);
-
- /*
- * Switch to usermode gs and return to 64-bit usermode using
- * sysret. Only used in 64-bit kernels to return to 64-bit
- * processes. Usermode register state, including %rsp, must
- * already be restored.
- */
- void (*usergs_sysret64)(void);
-
- /*
- * Switch to usermode gs and return to 32-bit usermode using
- * sysret. Used to return to 32-on-64 compat processes.
- * Other usermode register state, including %esp, must already
- * be restored.
- */
- void (*usergs_sysret32)(void);
-
- /* Normal iret. Jump to this with the standard iret stack
- frame set up. */
- void (*iret)(void);
-
- void (*swapgs)(void);
-
- void (*start_context_switch)(struct task_struct *prev);
- void (*end_context_switch)(struct task_struct *next);
-};
-
-struct pv_irq_ops {
- void (*init_IRQ)(void);
-
- /*
- * Get/set interrupt state. save_fl and restore_fl are only
- * expected to use X86_EFLAGS_IF; all other bits
- * returned from save_fl are undefined, and may be ignored by
- * restore_fl.
- *
- * NOTE: These functions callers expect the callee to preserve
- * more registers than the standard C calling convention.
- */
- struct paravirt_callee_save save_fl;
- struct paravirt_callee_save restore_fl;
- struct paravirt_callee_save irq_disable;
- struct paravirt_callee_save irq_enable;
-
- void (*safe_halt)(void);
- void (*halt)(void);
-
-#ifdef CONFIG_X86_64
- void (*adjust_exception_frame)(void);
-#endif
-};
-
-struct pv_apic_ops {
-#ifdef CONFIG_X86_LOCAL_APIC
- void (*setup_boot_clock)(void);
- void (*setup_secondary_clock)(void);
-
- void (*startup_ipi_hook)(int phys_apicid,
- unsigned long start_eip,
- unsigned long start_esp);
-#endif
-};
-
-struct pv_mmu_ops {
- /*
- * Called before/after init_mm pagetable setup. setup_start
- * may reset %cr3, and may pre-install parts of the pagetable;
- * pagetable setup is expected to preserve any existing
- * mapping.
- */
- void (*pagetable_setup_start)(pgd_t *pgd_base);
- void (*pagetable_setup_done)(pgd_t *pgd_base);
-
- unsigned long (*read_cr2)(void);
- void (*write_cr2)(unsigned long);
-
- unsigned long (*read_cr3)(void);
- void (*write_cr3)(unsigned long);
-
- /*
- * Hooks for intercepting the creation/use/destruction of an
- * mm_struct.
- */
- void (*activate_mm)(struct mm_struct *prev,
- struct mm_struct *next);
- void (*dup_mmap)(struct mm_struct *oldmm,
- struct mm_struct *mm);
- void (*exit_mmap)(struct mm_struct *mm);
-
-
- /* TLB operations */
- void (*flush_tlb_user)(void);
- void (*flush_tlb_kernel)(void);
- void (*flush_tlb_single)(unsigned long addr);
- void (*flush_tlb_others)(const struct cpumask *cpus,
- struct mm_struct *mm,
- unsigned long va);
-
- /* Hooks for allocating and freeing a pagetable top-level */
- int (*pgd_alloc)(struct mm_struct *mm);
- void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
-
- /*
- * Hooks for allocating/releasing pagetable pages when they're
- * attached to a pagetable
- */
- void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
- void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
- void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
- void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
- void (*release_pte)(unsigned long pfn);
- void (*release_pmd)(unsigned long pfn);
- void (*release_pud)(unsigned long pfn);
-
- /* Pagetable manipulation functions */
- void (*set_pte)(pte_t *ptep, pte_t pteval);
- void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pteval);
- void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
- void (*pte_update)(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep);
- void (*pte_update_defer)(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep);
-
- pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep);
- void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte);
-
- struct paravirt_callee_save pte_val;
- struct paravirt_callee_save make_pte;
-
- struct paravirt_callee_save pgd_val;
- struct paravirt_callee_save make_pgd;
-
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
- void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
- void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep);
- void (*pmd_clear)(pmd_t *pmdp);
-
-#endif /* CONFIG_X86_PAE */
-
- void (*set_pud)(pud_t *pudp, pud_t pudval);
-
- struct paravirt_callee_save pmd_val;
- struct paravirt_callee_save make_pmd;
-
-#if PAGETABLE_LEVELS == 4
- struct paravirt_callee_save pud_val;
- struct paravirt_callee_save make_pud;
-
- void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
-#endif /* PAGETABLE_LEVELS == 4 */
-#endif /* PAGETABLE_LEVELS >= 3 */
-
-#ifdef CONFIG_HIGHPTE
- void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
-#endif
-
- struct pv_lazy_ops lazy_mode;
-
- /* dom0 ops */
-
- /* Sometimes the physical address is a pfn, and sometimes its
- an mfn. We can tell which is which from the index. */
- void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
- phys_addr_t phys, pgprot_t flags);
-};
-
-struct raw_spinlock;
-struct pv_lock_ops {
- int (*spin_is_locked)(struct raw_spinlock *lock);
- int (*spin_is_contended)(struct raw_spinlock *lock);
- void (*spin_lock)(struct raw_spinlock *lock);
- void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
- int (*spin_trylock)(struct raw_spinlock *lock);
- void (*spin_unlock)(struct raw_spinlock *lock);
-};
-
-/* This contains all the paravirt structures: we get a convenient
- * number for each function using the offset which we use to indicate
- * what to patch. */
-struct paravirt_patch_template {
- struct pv_init_ops pv_init_ops;
- struct pv_time_ops pv_time_ops;
- struct pv_cpu_ops pv_cpu_ops;
- struct pv_irq_ops pv_irq_ops;
- struct pv_apic_ops pv_apic_ops;
- struct pv_mmu_ops pv_mmu_ops;
- struct pv_lock_ops pv_lock_ops;
-};
-
-extern struct pv_info pv_info;
-extern struct pv_init_ops pv_init_ops;
-extern struct pv_time_ops pv_time_ops;
-extern struct pv_cpu_ops pv_cpu_ops;
-extern struct pv_irq_ops pv_irq_ops;
-extern struct pv_apic_ops pv_apic_ops;
-extern struct pv_mmu_ops pv_mmu_ops;
-extern struct pv_lock_ops pv_lock_ops;
-
-#define PARAVIRT_PATCH(x) \
- (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
-
-#define paravirt_type(op) \
- [paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \
- [paravirt_opptr] "i" (&(op))
-#define paravirt_clobber(clobber) \
- [paravirt_clobber] "i" (clobber)
-
-/*
- * Generate some code, and mark it as patchable by the
- * apply_paravirt() alternate instruction patcher.
- */
-#define _paravirt_alt(insn_string, type, clobber) \
- "771:\n\t" insn_string "\n" "772:\n" \
- ".pushsection .parainstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR " 771b\n" \
- " .byte " type "\n" \
- " .byte 772b-771b\n" \
- " .short " clobber "\n" \
- ".popsection\n"
-
-/* Generate patchable code, with the default asm parameters. */
-#define paravirt_alt(insn_string) \
- _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
-
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code) \
- extern const char start_##ops##_##name[], end_##ops##_##name[]; \
- asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
-unsigned paravirt_patch_nop(void);
-unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ignore(unsigned len);
-unsigned paravirt_patch_call(void *insnbuf,
- const void *target, u16 tgt_clobbers,
- unsigned long addr, u16 site_clobbers,
- unsigned len);
-unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
- unsigned long addr, unsigned len);
-unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
- unsigned long addr, unsigned len);
-
-unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
- const char *start, const char *end);
-
-unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
- unsigned long addr, unsigned len);
-
-int paravirt_disable_iospace(void);
-
-/*
- * This generates an indirect call based on the operation type number.
- * The type number, computed in PARAVIRT_PATCH, is derived from the
- * offset into the paravirt_patch_template structure, and can therefore be
- * freely converted back into a structure offset.
- */
-#define PARAVIRT_CALL "call *%c[paravirt_opptr];"
-
-/*
- * These macros are intended to wrap calls through one of the paravirt
- * ops structs, so that they can be later identified and patched at
- * runtime.
- *
- * Normally, a call to a pv_op function is a simple indirect call:
- * (pv_op_struct.operations)(args...).
- *
- * Unfortunately, this is a relatively slow operation for modern CPUs,
- * because it cannot necessarily determine what the destination
- * address is. In this case, the address is a runtime constant, so at
- * the very least we can patch the call to e a simple direct call, or
- * ideally, patch an inline implementation into the callsite. (Direct
- * calls are essentially free, because the call and return addresses
- * are completely predictable.)
- *
- * For i386, these macros rely on the standard gcc "regparm(3)" calling
- * convention, in which the first three arguments are placed in %eax,
- * %edx, %ecx (in that order), and the remaining arguments are placed
- * on the stack. All caller-save registers (eax,edx,ecx) are expected
- * to be modified (either clobbered or used for return values).
- * X86_64, on the other hand, already specifies a register-based calling
- * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
- * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
- * special handling for dealing with 4 arguments, unlike i386.
- * However, x86_64 also have to clobber all caller saved registers, which
- * unfortunately, are quite a bit (r8 - r11)
- *
- * The call instruction itself is marked by placing its start address
- * and size into the .parainstructions section, so that
- * apply_paravirt() in arch/i386/kernel/alternative.c can do the
- * appropriate patching under the control of the backend pv_init_ops
- * implementation.
- *
- * Unfortunately there's no way to get gcc to generate the args setup
- * for the call, and then allow the call itself to be generated by an
- * inline asm. Because of this, we must do the complete arg setup and
- * return value handling from within these macros. This is fairly
- * cumbersome.
- *
- * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
- * It could be extended to more arguments, but there would be little
- * to be gained from that. For each number of arguments, there are
- * the two VCALL and CALL variants for void and non-void functions.
- *
- * When there is a return value, the invoker of the macro must specify
- * the return type. The macro then uses sizeof() on that type to
- * determine whether its a 32 or 64 bit value, and places the return
- * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
- * 64-bit). For x86_64 machines, it just returns at %rax regardless of
- * the return value size.
- *
- * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
- * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
- * in low,high order
- *
- * Small structures are passed and returned in registers. The macro
- * calling convention can't directly deal with this, so the wrapper
- * functions must do this.
- *
- * These PVOP_* macros are only defined within this header. This
- * means that all uses must be wrapped in inline functions. This also
- * makes sure the incoming and outgoing types are always correct.
- */
-#ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS \
- unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS PVOP_VCALL_ARGS
-
-#define PVOP_CALL_ARG1(x) "a" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x) "d" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x) "c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS "=a" (__eax), "=d" (__edx), \
- "=c" (__ecx)
-#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS
-
-#define PVOP_VCALLEE_CLOBBERS "=a" (__eax), "=d" (__edx)
-#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS
-#define VEXTRA_CLOBBERS
-#else /* CONFIG_X86_64 */
-#define PVOP_VCALL_ARGS \
- unsigned long __edi = __edi, __esi = __esi, \
- __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS PVOP_VCALL_ARGS, __eax
-
-#define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x) "d" ((unsigned long)(x))
-#define PVOP_CALL_ARG4(x) "c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS "=D" (__edi), \
- "=S" (__esi), "=d" (__edx), \
- "=c" (__ecx)
-#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax)
-
-#define PVOP_VCALLEE_CLOBBERS "=a" (__eax)
-#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11"
-#define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11"
-#endif /* CONFIG_X86_32 */
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-#define PVOP_TEST_NULL(op) BUG_ON(op == NULL)
-#else
-#define PVOP_TEST_NULL(op) ((void)op)
-#endif
-
-#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr, \
- pre, post, ...) \
- ({ \
- rettype __ret; \
- PVOP_CALL_ARGS; \
- PVOP_TEST_NULL(op); \
- /* This is 32-bit specific, but is okay in 64-bit */ \
- /* since this condition will never hold */ \
- if (sizeof(rettype) > sizeof(unsigned long)) { \
- asm volatile(pre \
- paravirt_alt(PARAVIRT_CALL) \
- post \
- : call_clbr \
- : paravirt_type(op), \
- paravirt_clobber(clbr), \
- ##__VA_ARGS__ \
- : "memory", "cc" extra_clbr); \
- __ret = (rettype)((((u64)__edx) << 32) | __eax); \
- } else { \
- asm volatile(pre \
- paravirt_alt(PARAVIRT_CALL) \
- post \
- : call_clbr \
- : paravirt_type(op), \
- paravirt_clobber(clbr), \
- ##__VA_ARGS__ \
- : "memory", "cc" extra_clbr); \
- __ret = (rettype)__eax; \
- } \
- __ret; \
- })
-
-#define __PVOP_CALL(rettype, op, pre, post, ...) \
- ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS, \
- EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
-
-#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...) \
- ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
- PVOP_CALLEE_CLOBBERS, , \
- pre, post, ##__VA_ARGS__)
-
-
-#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \
- ({ \
- PVOP_VCALL_ARGS; \
- PVOP_TEST_NULL(op); \
- asm volatile(pre \
- paravirt_alt(PARAVIRT_CALL) \
- post \
- : call_clbr \
- : paravirt_type(op), \
- paravirt_clobber(clbr), \
- ##__VA_ARGS__ \
- : "memory", "cc" extra_clbr); \
- })
-
-#define __PVOP_VCALL(op, pre, post, ...) \
- ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS, \
- VEXTRA_CLOBBERS, \
- pre, post, ##__VA_ARGS__)
-
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...) \
- ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
- PVOP_VCALLEE_CLOBBERS, , \
- pre, post, ##__VA_ARGS__)
-
-
-
-#define PVOP_CALL0(rettype, op) \
- __PVOP_CALL(rettype, op, "", "")
-#define PVOP_VCALL0(op) \
- __PVOP_VCALL(op, "", "")
-
-#define PVOP_CALLEE0(rettype, op) \
- __PVOP_CALLEESAVE(rettype, op, "", "")
-#define PVOP_VCALLEE0(op) \
- __PVOP_VCALLEESAVE(op, "", "")
-
-
-#define PVOP_CALL1(rettype, op, arg1) \
- __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALL1(op, arg1) \
- __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
-
-#define PVOP_CALLEE1(rettype, op, arg1) \
- __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALLEE1(op, arg1) \
- __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
-
-
-#define PVOP_CALL2(rettype, op, arg1, arg2) \
- __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
- PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALL2(op, arg1, arg2) \
- __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
- PVOP_CALL_ARG2(arg2))
-
-#define PVOP_CALLEE2(rettype, op, arg1, arg2) \
- __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
- PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALLEE2(op, arg1, arg2) \
- __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1), \
- PVOP_CALL_ARG2(arg2))
-
-
-#define PVOP_CALL3(rettype, op, arg1, arg2, arg3) \
- __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
- PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-#define PVOP_VCALL3(op, arg1, arg2, arg3) \
- __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
- PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-
-/* This is the only difference in x86_64. We can make it much simpler */
-#ifdef CONFIG_X86_32
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
- __PVOP_CALL(rettype, op, \
- "push %[_arg4];", "lea 4(%%esp),%%esp;", \
- PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
- PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
- __PVOP_VCALL(op, \
- "push %[_arg4];", "lea 4(%%esp),%%esp;", \
- "0" ((u32)(arg1)), "1" ((u32)(arg2)), \
- "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
-#else
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
- __PVOP_CALL(rettype, op, "", "", \
- PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
- PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
- __PVOP_VCALL(op, "", "", \
- PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
- PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#endif
static inline int paravirt_enabled(void)
{
@@ -820,15 +142,22 @@
{
return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
}
-static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
+
+static inline int paravirt_rdmsr_regs(u32 *regs)
{
- return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
+ return PVOP_CALL1(int, pv_cpu_ops.rdmsr_regs, regs);
}
+
static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
{
return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
}
+static inline int paravirt_wrmsr_regs(u32 *regs)
+{
+ return PVOP_CALL1(int, pv_cpu_ops.wrmsr_regs, regs);
+}
+
/* These should all do BUG_ON(_err), but our headers are too tangled. */
#define rdmsr(msr, val1, val2) \
do { \
@@ -862,6 +191,9 @@
_err; \
})
+#define rdmsr_safe_regs(regs) paravirt_rdmsr_regs(regs)
+#define wrmsr_safe_regs(regs) paravirt_wrmsr_regs(regs)
+
static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
{
int err;
@@ -871,12 +203,31 @@
}
static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
{
+ u32 gprs[8] = { 0 };
int err;
- *p = paravirt_read_msr_amd(msr, &err);
+ gprs[1] = msr;
+ gprs[7] = 0x9c5a203a;
+
+ err = paravirt_rdmsr_regs(gprs);
+
+ *p = gprs[0] | ((u64)gprs[2] << 32);
+
return err;
}
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+ u32 gprs[8] = { 0 };
+
+ gprs[0] = (u32)val;
+ gprs[1] = msr;
+ gprs[2] = val >> 32;
+ gprs[7] = 0x9c5a203a;
+
+ return paravirt_wrmsr_regs(gprs);
+}
+
static inline u64 paravirt_read_tsc(void)
{
return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
@@ -1393,20 +744,6 @@
}
#endif /* CONFIG_X86_PAE */
-/* Lazy mode for batching updates / context switch */
-enum paravirt_lazy_mode {
- PARAVIRT_LAZY_NONE,
- PARAVIRT_LAZY_MMU,
- PARAVIRT_LAZY_CPU,
-};
-
-enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
-void paravirt_start_context_switch(struct task_struct *prev);
-void paravirt_end_context_switch(struct task_struct *next);
-
-void paravirt_enter_lazy_mmu(void);
-void paravirt_leave_lazy_mmu(void);
-
#define __HAVE_ARCH_START_CONTEXT_SWITCH
static inline void arch_start_context_switch(struct task_struct *prev)
{
@@ -1437,12 +774,6 @@
pv_mmu_ops.set_fixmap(idx, phys, flags);
}
-void _paravirt_nop(void);
-u32 _paravirt_ident_32(u32);
-u64 _paravirt_ident_64(u64);
-
-#define paravirt_nop ((void *)_paravirt_nop)
-
#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
@@ -1479,17 +810,6 @@
#endif
-/* These all sit in the .parainstructions section to tell us what to patch. */
-struct paravirt_patch_site {
- u8 *instr; /* original instructions */
- u8 instrtype; /* type of this instruction */
- u8 len; /* length of original instruction */
- u16 clobbers; /* what registers you may clobber */
-};
-
-extern struct paravirt_patch_site __parainstructions[],
- __parainstructions_end[];
-
#ifdef CONFIG_X86_32
#define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
#define PV_RESTORE_REGS "popl %edx; popl %ecx;"
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
new file mode 100644
index 0000000..25402d0
--- /dev/null
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -0,0 +1,721 @@
+#ifndef _ASM_X86_PARAVIRT_TYPES_H
+#define _ASM_X86_PARAVIRT_TYPES_H
+
+/* Bitmask of what can be clobbered: usually at least eax. */
+#define CLBR_NONE 0
+#define CLBR_EAX (1 << 0)
+#define CLBR_ECX (1 << 1)
+#define CLBR_EDX (1 << 2)
+#define CLBR_EDI (1 << 3)
+
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY ((1 << 4) - 1)
+
+#define CLBR_ARG_REGS (CLBR_EAX | CLBR_EDX | CLBR_ECX)
+#define CLBR_RET_REG (CLBR_EAX | CLBR_EDX)
+#define CLBR_SCRATCH (0)
+#else
+#define CLBR_RAX CLBR_EAX
+#define CLBR_RCX CLBR_ECX
+#define CLBR_RDX CLBR_EDX
+#define CLBR_RDI CLBR_EDI
+#define CLBR_RSI (1 << 4)
+#define CLBR_R8 (1 << 5)
+#define CLBR_R9 (1 << 6)
+#define CLBR_R10 (1 << 7)
+#define CLBR_R11 (1 << 8)
+
+#define CLBR_ANY ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+ CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG (CLBR_RAX)
+#define CLBR_SCRATCH (CLBR_R10 | CLBR_R11)
+
+#endif /* X86_64 */
+
+#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/desc_defs.h>
+#include <asm/kmap_types.h>
+
+struct page;
+struct thread_struct;
+struct desc_ptr;
+struct tss_struct;
+struct mm_struct;
+struct desc_struct;
+struct task_struct;
+struct cpumask;
+
+/*
+ * Wrapper type for pointers to code which uses the non-standard
+ * calling convention. See PV_CALL_SAVE_REGS_THUNK below.
+ */
+struct paravirt_callee_save {
+ void *func;
+};
+
+/* general info */
+struct pv_info {
+ unsigned int kernel_rpl;
+ int shared_kernel_pmd;
+ int paravirt_enabled;
+ const char *name;
+};
+
+struct pv_init_ops {
+ /*
+ * Patch may replace one of the defined code sequences with
+ * arbitrary code, subject to the same register constraints.
+ * This generally means the code is not free to clobber any
+ * registers other than EAX. The patch function should return
+ * the number of bytes of code generated, as we nop pad the
+ * rest in generic code.
+ */
+ unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
+ unsigned long addr, unsigned len);
+
+ /* Basic arch-specific setup */
+ void (*arch_setup)(void);
+ char *(*memory_setup)(void);
+ void (*post_allocator_init)(void);
+
+ /* Print a banner to identify the environment */
+ void (*banner)(void);
+};
+
+
+struct pv_lazy_ops {
+ /* Set deferred update mode, used for batching operations. */
+ void (*enter)(void);
+ void (*leave)(void);
+};
+
+struct pv_time_ops {
+ void (*time_init)(void);
+
+ /* Set and set time of day */
+ unsigned long (*get_wallclock)(void);
+ int (*set_wallclock)(unsigned long);
+
+ unsigned long long (*sched_clock)(void);
+ unsigned long (*get_tsc_khz)(void);
+};
+
+struct pv_cpu_ops {
+ /* hooks for various privileged instructions */
+ unsigned long (*get_debugreg)(int regno);
+ void (*set_debugreg)(int regno, unsigned long value);
+
+ void (*clts)(void);
+
+ unsigned long (*read_cr0)(void);
+ void (*write_cr0)(unsigned long);
+
+ unsigned long (*read_cr4_safe)(void);
+ unsigned long (*read_cr4)(void);
+ void (*write_cr4)(unsigned long);
+
+#ifdef CONFIG_X86_64
+ unsigned long (*read_cr8)(void);
+ void (*write_cr8)(unsigned long);
+#endif
+
+ /* Segment descriptor handling */
+ void (*load_tr_desc)(void);
+ void (*load_gdt)(const struct desc_ptr *);
+ void (*load_idt)(const struct desc_ptr *);
+ void (*store_gdt)(struct desc_ptr *);
+ void (*store_idt)(struct desc_ptr *);
+ void (*set_ldt)(const void *desc, unsigned entries);
+ unsigned long (*store_tr)(void);
+ void (*load_tls)(struct thread_struct *t, unsigned int cpu);
+#ifdef CONFIG_X86_64
+ void (*load_gs_index)(unsigned int idx);
+#endif
+ void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
+ const void *desc);
+ void (*write_gdt_entry)(struct desc_struct *,
+ int entrynum, const void *desc, int size);
+ void (*write_idt_entry)(gate_desc *,
+ int entrynum, const gate_desc *gate);
+ void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
+ void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
+
+ void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
+
+ void (*set_iopl_mask)(unsigned mask);
+
+ void (*wbinvd)(void);
+ void (*io_delay)(void);
+
+ /* cpuid emulation, mostly so that caps bits can be disabled */
+ void (*cpuid)(unsigned int *eax, unsigned int *ebx,
+ unsigned int *ecx, unsigned int *edx);
+
+ /* MSR, PMC and TSR operations.
+ err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
+ u64 (*read_msr)(unsigned int msr, int *err);
+ int (*rdmsr_regs)(u32 *regs);
+ int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+ int (*wrmsr_regs)(u32 *regs);
+
+ u64 (*read_tsc)(void);
+ u64 (*read_pmc)(int counter);
+ unsigned long long (*read_tscp)(unsigned int *aux);
+
+ /*
+ * Atomically enable interrupts and return to userspace. This
+ * is only ever used to return to 32-bit processes; in a
+ * 64-bit kernel, it's used for 32-on-64 compat processes, but
+ * never native 64-bit processes. (Jump, not call.)
+ */
+ void (*irq_enable_sysexit)(void);
+
+ /*
+ * Switch to usermode gs and return to 64-bit usermode using
+ * sysret. Only used in 64-bit kernels to return to 64-bit
+ * processes. Usermode register state, including %rsp, must
+ * already be restored.
+ */
+ void (*usergs_sysret64)(void);
+
+ /*
+ * Switch to usermode gs and return to 32-bit usermode using
+ * sysret. Used to return to 32-on-64 compat processes.
+ * Other usermode register state, including %esp, must already
+ * be restored.
+ */
+ void (*usergs_sysret32)(void);
+
+ /* Normal iret. Jump to this with the standard iret stack
+ frame set up. */
+ void (*iret)(void);
+
+ void (*swapgs)(void);
+
+ void (*start_context_switch)(struct task_struct *prev);
+ void (*end_context_switch)(struct task_struct *next);
+};
+
+struct pv_irq_ops {
+ void (*init_IRQ)(void);
+
+ /*
+ * Get/set interrupt state. save_fl and restore_fl are only
+ * expected to use X86_EFLAGS_IF; all other bits
+ * returned from save_fl are undefined, and may be ignored by
+ * restore_fl.
+ *
+ * NOTE: These functions callers expect the callee to preserve
+ * more registers than the standard C calling convention.
+ */
+ struct paravirt_callee_save save_fl;
+ struct paravirt_callee_save restore_fl;
+ struct paravirt_callee_save irq_disable;
+ struct paravirt_callee_save irq_enable;
+
+ void (*safe_halt)(void);
+ void (*halt)(void);
+
+#ifdef CONFIG_X86_64
+ void (*adjust_exception_frame)(void);
+#endif
+};
+
+struct pv_apic_ops {
+#ifdef CONFIG_X86_LOCAL_APIC
+ void (*setup_boot_clock)(void);
+ void (*setup_secondary_clock)(void);
+
+ void (*startup_ipi_hook)(int phys_apicid,
+ unsigned long start_eip,
+ unsigned long start_esp);
+#endif
+};
+
+struct pv_mmu_ops {
+ /*
+ * Called before/after init_mm pagetable setup. setup_start
+ * may reset %cr3, and may pre-install parts of the pagetable;
+ * pagetable setup is expected to preserve any existing
+ * mapping.
+ */
+ void (*pagetable_setup_start)(pgd_t *pgd_base);
+ void (*pagetable_setup_done)(pgd_t *pgd_base);
+
+ unsigned long (*read_cr2)(void);
+ void (*write_cr2)(unsigned long);
+
+ unsigned long (*read_cr3)(void);
+ void (*write_cr3)(unsigned long);
+
+ /*
+ * Hooks for intercepting the creation/use/destruction of an
+ * mm_struct.
+ */
+ void (*activate_mm)(struct mm_struct *prev,
+ struct mm_struct *next);
+ void (*dup_mmap)(struct mm_struct *oldmm,
+ struct mm_struct *mm);
+ void (*exit_mmap)(struct mm_struct *mm);
+
+
+ /* TLB operations */
+ void (*flush_tlb_user)(void);
+ void (*flush_tlb_kernel)(void);
+ void (*flush_tlb_single)(unsigned long addr);
+ void (*flush_tlb_others)(const struct cpumask *cpus,
+ struct mm_struct *mm,
+ unsigned long va);
+
+ /* Hooks for allocating and freeing a pagetable top-level */
+ int (*pgd_alloc)(struct mm_struct *mm);
+ void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
+
+ /*
+ * Hooks for allocating/releasing pagetable pages when they're
+ * attached to a pagetable
+ */
+ void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
+ void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
+ void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
+ void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
+ void (*release_pte)(unsigned long pfn);
+ void (*release_pmd)(unsigned long pfn);
+ void (*release_pud)(unsigned long pfn);
+
+ /* Pagetable manipulation functions */
+ void (*set_pte)(pte_t *ptep, pte_t pteval);
+ void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval);
+ void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
+ void (*pte_update)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
+ void (*pte_update_defer)(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep);
+
+ pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
+ void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte);
+
+ struct paravirt_callee_save pte_val;
+ struct paravirt_callee_save make_pte;
+
+ struct paravirt_callee_save pgd_val;
+ struct paravirt_callee_save make_pgd;
+
+#if PAGETABLE_LEVELS >= 3
+#ifdef CONFIG_X86_PAE
+ void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
+ void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
+ void (*pmd_clear)(pmd_t *pmdp);
+
+#endif /* CONFIG_X86_PAE */
+
+ void (*set_pud)(pud_t *pudp, pud_t pudval);
+
+ struct paravirt_callee_save pmd_val;
+ struct paravirt_callee_save make_pmd;
+
+#if PAGETABLE_LEVELS == 4
+ struct paravirt_callee_save pud_val;
+ struct paravirt_callee_save make_pud;
+
+ void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
+#endif /* PAGETABLE_LEVELS == 4 */
+#endif /* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_HIGHPTE
+ void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
+#endif
+
+ struct pv_lazy_ops lazy_mode;
+
+ /* dom0 ops */
+
+ /* Sometimes the physical address is a pfn, and sometimes its
+ an mfn. We can tell which is which from the index. */
+ void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
+ phys_addr_t phys, pgprot_t flags);
+};
+
+struct raw_spinlock;
+struct pv_lock_ops {
+ int (*spin_is_locked)(struct raw_spinlock *lock);
+ int (*spin_is_contended)(struct raw_spinlock *lock);
+ void (*spin_lock)(struct raw_spinlock *lock);
+ void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
+ int (*spin_trylock)(struct raw_spinlock *lock);
+ void (*spin_unlock)(struct raw_spinlock *lock);
+};
+
+/* This contains all the paravirt structures: we get a convenient
+ * number for each function using the offset which we use to indicate
+ * what to patch. */
+struct paravirt_patch_template {
+ struct pv_init_ops pv_init_ops;
+ struct pv_time_ops pv_time_ops;
+ struct pv_cpu_ops pv_cpu_ops;
+ struct pv_irq_ops pv_irq_ops;
+ struct pv_apic_ops pv_apic_ops;
+ struct pv_mmu_ops pv_mmu_ops;
+ struct pv_lock_ops pv_lock_ops;
+};
+
+extern struct pv_info pv_info;
+extern struct pv_init_ops pv_init_ops;
+extern struct pv_time_ops pv_time_ops;
+extern struct pv_cpu_ops pv_cpu_ops;
+extern struct pv_irq_ops pv_irq_ops;
+extern struct pv_apic_ops pv_apic_ops;
+extern struct pv_mmu_ops pv_mmu_ops;
+extern struct pv_lock_ops pv_lock_ops;
+
+#define PARAVIRT_PATCH(x) \
+ (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
+
+#define paravirt_type(op) \
+ [paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \
+ [paravirt_opptr] "i" (&(op))
+#define paravirt_clobber(clobber) \
+ [paravirt_clobber] "i" (clobber)
+
+/*
+ * Generate some code, and mark it as patchable by the
+ * apply_paravirt() alternate instruction patcher.
+ */
+#define _paravirt_alt(insn_string, type, clobber) \
+ "771:\n\t" insn_string "\n" "772:\n" \
+ ".pushsection .parainstructions,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR " 771b\n" \
+ " .byte " type "\n" \
+ " .byte 772b-771b\n" \
+ " .short " clobber "\n" \
+ ".popsection\n"
+
+/* Generate patchable code, with the default asm parameters. */
+#define paravirt_alt(insn_string) \
+ _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
+
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) \
+ extern const char start_##ops##_##name[], end_##ops##_##name[]; \
+ asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
+unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ignore(unsigned len);
+unsigned paravirt_patch_call(void *insnbuf,
+ const void *target, u16 tgt_clobbers,
+ unsigned long addr, u16 site_clobbers,
+ unsigned len);
+unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
+ unsigned long addr, unsigned len);
+unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
+ unsigned long addr, unsigned len);
+
+unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
+ const char *start, const char *end);
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+ unsigned long addr, unsigned len);
+
+int paravirt_disable_iospace(void);
+
+/*
+ * This generates an indirect call based on the operation type number.
+ * The type number, computed in PARAVIRT_PATCH, is derived from the
+ * offset into the paravirt_patch_template structure, and can therefore be
+ * freely converted back into a structure offset.
+ */
+#define PARAVIRT_CALL "call *%c[paravirt_opptr];"
+
+/*
+ * These macros are intended to wrap calls through one of the paravirt
+ * ops structs, so that they can be later identified and patched at
+ * runtime.
+ *
+ * Normally, a call to a pv_op function is a simple indirect call:
+ * (pv_op_struct.operations)(args...).
+ *
+ * Unfortunately, this is a relatively slow operation for modern CPUs,
+ * because it cannot necessarily determine what the destination
+ * address is. In this case, the address is a runtime constant, so at
+ * the very least we can patch the call to e a simple direct call, or
+ * ideally, patch an inline implementation into the callsite. (Direct
+ * calls are essentially free, because the call and return addresses
+ * are completely predictable.)
+ *
+ * For i386, these macros rely on the standard gcc "regparm(3)" calling
+ * convention, in which the first three arguments are placed in %eax,
+ * %edx, %ecx (in that order), and the remaining arguments are placed
+ * on the stack. All caller-save registers (eax,edx,ecx) are expected
+ * to be modified (either clobbered or used for return values).
+ * X86_64, on the other hand, already specifies a register-based calling
+ * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
+ * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
+ * special handling for dealing with 4 arguments, unlike i386.
+ * However, x86_64 also have to clobber all caller saved registers, which
+ * unfortunately, are quite a bit (r8 - r11)
+ *
+ * The call instruction itself is marked by placing its start address
+ * and size into the .parainstructions section, so that
+ * apply_paravirt() in arch/i386/kernel/alternative.c can do the
+ * appropriate patching under the control of the backend pv_init_ops
+ * implementation.
+ *
+ * Unfortunately there's no way to get gcc to generate the args setup
+ * for the call, and then allow the call itself to be generated by an
+ * inline asm. Because of this, we must do the complete arg setup and
+ * return value handling from within these macros. This is fairly
+ * cumbersome.
+ *
+ * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
+ * It could be extended to more arguments, but there would be little
+ * to be gained from that. For each number of arguments, there are
+ * the two VCALL and CALL variants for void and non-void functions.
+ *
+ * When there is a return value, the invoker of the macro must specify
+ * the return type. The macro then uses sizeof() on that type to
+ * determine whether its a 32 or 64 bit value, and places the return
+ * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
+ * 64-bit). For x86_64 machines, it just returns at %rax regardless of
+ * the return value size.
+ *
+ * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
+ * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
+ * in low,high order
+ *
+ * Small structures are passed and returned in registers. The macro
+ * calling convention can't directly deal with this, so the wrapper
+ * functions must do this.
+ *
+ * These PVOP_* macros are only defined within this header. This
+ * means that all uses must be wrapped in inline functions. This also
+ * makes sure the incoming and outgoing types are always correct.
+ */
+#ifdef CONFIG_X86_32
+#define PVOP_VCALL_ARGS \
+ unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
+#define PVOP_CALL_ARGS PVOP_VCALL_ARGS
+
+#define PVOP_CALL_ARG1(x) "a" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x) "d" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x) "c" ((unsigned long)(x))
+
+#define PVOP_VCALL_CLOBBERS "=a" (__eax), "=d" (__edx), \
+ "=c" (__ecx)
+#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS
+
+#define PVOP_VCALLEE_CLOBBERS "=a" (__eax), "=d" (__edx)
+#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
+
+#define EXTRA_CLOBBERS
+#define VEXTRA_CLOBBERS
+#else /* CONFIG_X86_64 */
+#define PVOP_VCALL_ARGS \
+ unsigned long __edi = __edi, __esi = __esi, \
+ __edx = __edx, __ecx = __ecx
+#define PVOP_CALL_ARGS PVOP_VCALL_ARGS, __eax
+
+#define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x) "d" ((unsigned long)(x))
+#define PVOP_CALL_ARG4(x) "c" ((unsigned long)(x))
+
+#define PVOP_VCALL_CLOBBERS "=D" (__edi), \
+ "=S" (__esi), "=d" (__edx), \
+ "=c" (__ecx)
+#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax)
+
+#define PVOP_VCALLEE_CLOBBERS "=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
+
+#define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11"
+#define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11"
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+#define PVOP_TEST_NULL(op) BUG_ON(op == NULL)
+#else
+#define PVOP_TEST_NULL(op) ((void)op)
+#endif
+
+#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr, \
+ pre, post, ...) \
+ ({ \
+ rettype __ret; \
+ PVOP_CALL_ARGS; \
+ PVOP_TEST_NULL(op); \
+ /* This is 32-bit specific, but is okay in 64-bit */ \
+ /* since this condition will never hold */ \
+ if (sizeof(rettype) > sizeof(unsigned long)) { \
+ asm volatile(pre \
+ paravirt_alt(PARAVIRT_CALL) \
+ post \
+ : call_clbr \
+ : paravirt_type(op), \
+ paravirt_clobber(clbr), \
+ ##__VA_ARGS__ \
+ : "memory", "cc" extra_clbr); \
+ __ret = (rettype)((((u64)__edx) << 32) | __eax); \
+ } else { \
+ asm volatile(pre \
+ paravirt_alt(PARAVIRT_CALL) \
+ post \
+ : call_clbr \
+ : paravirt_type(op), \
+ paravirt_clobber(clbr), \
+ ##__VA_ARGS__ \
+ : "memory", "cc" extra_clbr); \
+ __ret = (rettype)__eax; \
+ } \
+ __ret; \
+ })
+
+#define __PVOP_CALL(rettype, op, pre, post, ...) \
+ ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS, \
+ EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
+
+#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...) \
+ ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
+ PVOP_CALLEE_CLOBBERS, , \
+ pre, post, ##__VA_ARGS__)
+
+
+#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \
+ ({ \
+ PVOP_VCALL_ARGS; \
+ PVOP_TEST_NULL(op); \
+ asm volatile(pre \
+ paravirt_alt(PARAVIRT_CALL) \
+ post \
+ : call_clbr \
+ : paravirt_type(op), \
+ paravirt_clobber(clbr), \
+ ##__VA_ARGS__ \
+ : "memory", "cc" extra_clbr); \
+ })
+
+#define __PVOP_VCALL(op, pre, post, ...) \
+ ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS, \
+ VEXTRA_CLOBBERS, \
+ pre, post, ##__VA_ARGS__)
+
+#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...) \
+ ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
+ PVOP_VCALLEE_CLOBBERS, , \
+ pre, post, ##__VA_ARGS__)
+
+
+
+#define PVOP_CALL0(rettype, op) \
+ __PVOP_CALL(rettype, op, "", "")
+#define PVOP_VCALL0(op) \
+ __PVOP_VCALL(op, "", "")
+
+#define PVOP_CALLEE0(rettype, op) \
+ __PVOP_CALLEESAVE(rettype, op, "", "")
+#define PVOP_VCALLEE0(op) \
+ __PVOP_VCALLEESAVE(op, "", "")
+
+
+#define PVOP_CALL1(rettype, op, arg1) \
+ __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALL1(op, arg1) \
+ __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
+
+#define PVOP_CALLEE1(rettype, op, arg1) \
+ __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALLEE1(op, arg1) \
+ __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
+
+
+#define PVOP_CALL2(rettype, op, arg1, arg2) \
+ __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
+ PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALL2(op, arg1, arg2) \
+ __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
+ PVOP_CALL_ARG2(arg2))
+
+#define PVOP_CALLEE2(rettype, op, arg1, arg2) \
+ __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
+ PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALLEE2(op, arg1, arg2) \
+ __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1), \
+ PVOP_CALL_ARG2(arg2))
+
+
+#define PVOP_CALL3(rettype, op, arg1, arg2, arg3) \
+ __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \
+ PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
+#define PVOP_VCALL3(op, arg1, arg2, arg3) \
+ __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \
+ PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
+
+/* This is the only difference in x86_64. We can make it much simpler */
+#ifdef CONFIG_X86_32
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
+ __PVOP_CALL(rettype, op, \
+ "push %[_arg4];", "lea 4(%%esp),%%esp;", \
+ PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
+ PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
+ __PVOP_VCALL(op, \
+ "push %[_arg4];", "lea 4(%%esp),%%esp;", \
+ "0" ((u32)(arg1)), "1" ((u32)(arg2)), \
+ "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#else
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \
+ __PVOP_CALL(rettype, op, "", "", \
+ PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
+ PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \
+ __PVOP_VCALL(op, "", "", \
+ PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \
+ PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
+#endif
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+ PARAVIRT_LAZY_NONE,
+ PARAVIRT_LAZY_MMU,
+ PARAVIRT_LAZY_CPU,
+};
+
+enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
+void paravirt_start_context_switch(struct task_struct *prev);
+void paravirt_end_context_switch(struct task_struct *next);
+
+void paravirt_enter_lazy_mmu(void);
+void paravirt_leave_lazy_mmu(void);
+
+void _paravirt_nop(void);
+u32 _paravirt_ident_32(u32);
+u64 _paravirt_ident_64(u64);
+
+#define paravirt_nop ((void *)_paravirt_nop)
+
+/* These all sit in the .parainstructions section to tell us what to patch. */
+struct paravirt_patch_site {
+ u8 *instr; /* original instructions */
+ u8 instrtype; /* type of this instruction */
+ u8 len; /* length of original instruction */
+ u16 clobbers; /* what registers you may clobber */
+};
+
+extern struct paravirt_patch_site __parainstructions[],
+ __parainstructions_end[];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_PARAVIRT_TYPES_H */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 103f1dd..04eacef 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -49,7 +49,7 @@
#define __percpu_arg(x) "%%"__stringify(__percpu_seg)":%P" #x
#define __my_cpu_offset percpu_read(this_cpu_off)
#else
-#define __percpu_arg(x) "%" #x
+#define __percpu_arg(x) "%P" #x
#endif
/*
@@ -104,36 +104,48 @@
} \
} while (0)
-#define percpu_from_op(op, var) \
+#define percpu_from_op(op, var, constraint) \
({ \
typeof(var) ret__; \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(1)",%0" \
: "=q" (ret__) \
- : "m" (var)); \
+ : constraint); \
break; \
case 2: \
asm(op "w "__percpu_arg(1)",%0" \
: "=r" (ret__) \
- : "m" (var)); \
+ : constraint); \
break; \
case 4: \
asm(op "l "__percpu_arg(1)",%0" \
: "=r" (ret__) \
- : "m" (var)); \
+ : constraint); \
break; \
case 8: \
asm(op "q "__percpu_arg(1)",%0" \
: "=r" (ret__) \
- : "m" (var)); \
+ : constraint); \
break; \
default: __bad_percpu_size(); \
} \
ret__; \
})
-#define percpu_read(var) percpu_from_op("mov", per_cpu__##var)
+/*
+ * percpu_read() makes gcc load the percpu variable every time it is
+ * accessed while percpu_read_stable() allows the value to be cached.
+ * percpu_read_stable() is more efficient and can be used if its value
+ * is guaranteed to be valid across cpus. The current users include
+ * get_current() and get_thread_info() both of which are actually
+ * per-thread variables implemented as per-cpu variables and thus
+ * stable for the duration of the respective task.
+ */
+#define percpu_read(var) percpu_from_op("mov", per_cpu__##var, \
+ "m" (per_cpu__##var))
+#define percpu_read_stable(var) percpu_from_op("mov", per_cpu__##var, \
+ "p" (&per_cpu__##var))
#define percpu_write(var, val) percpu_to_op("mov", per_cpu__##var, val)
#define percpu_add(var, val) percpu_to_op("add", per_cpu__##var, val)
#define percpu_sub(var, val) percpu_to_op("sub", per_cpu__##var, val)
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index fa64e40..e7b7c93 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -84,6 +84,16 @@
#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b
#define X86_PMC_IDX_FIXED_BUS_CYCLES (X86_PMC_IDX_FIXED + 2)
+/*
+ * We model BTS tracing as another fixed-mode PMC.
+ *
+ * We choose a value in the middle of the fixed counter range, since lower
+ * values are used by actual fixed counters and higher values are used
+ * to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
+ */
+#define X86_PMC_IDX_FIXED_BTS (X86_PMC_IDX_FIXED + 16)
+
+
#ifdef CONFIG_PERF_COUNTERS
extern void init_hw_perf_counters(void);
extern void perf_counters_lapic_init(void);
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3cc06e3..4c5b51f 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -2,6 +2,7 @@
#define _ASM_X86_PGTABLE_H
#include <asm/page.h>
+#include <asm/e820.h>
#include <asm/pgtable_types.h>
@@ -134,6 +135,11 @@
return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+ return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
static inline int pmd_large(pmd_t pte)
@@ -269,10 +275,17 @@
#define canon_pgprot(p) __pgprot(massage_pgprot(p))
-static inline int is_new_memtype_allowed(unsigned long flags,
- unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+ unsigned long flags,
+ unsigned long new_flags)
{
/*
+ * PAT type is always WB for ISA. So no need to check.
+ */
+ if (is_ISA_range(paddr, paddr + size - 1))
+ return 1;
+
+ /*
* Certain new memtypes are not allowed with certain
* requested memtype:
* - request is uncached, return cannot be write-back
@@ -351,7 +364,7 @@
* this macro returns the index of the entry in the pmd page which would
* control the given virtual address
*/
-static inline unsigned pmd_index(unsigned long address)
+static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
@@ -371,7 +384,7 @@
* this function returns the index of the entry in the pte page which would
* control the given virtual address
*/
-static inline unsigned pte_index(unsigned long address)
+static inline unsigned long pte_index(unsigned long address)
{
return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
}
@@ -422,11 +435,6 @@
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
-static inline unsigned long pmd_pfn(pmd_t pmd)
-{
- return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
-}
-
static inline int pud_large(pud_t pud)
{
return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
@@ -462,7 +470,7 @@
#define pgd_page(pgd) pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT)
/* to find an entry in a page-table-directory. */
-static inline unsigned pud_index(unsigned long address)
+static inline unsigned long pud_index(unsigned long address)
{
return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
}
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c776826..e08ea04 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -403,7 +403,17 @@
extern asmlinkage void ignore_sysret(void);
#else /* X86_64 */
#ifdef CONFIG_CC_STACKPROTECTOR
-DECLARE_PER_CPU(unsigned long, stack_canary);
+/*
+ * Make sure stack canary segment base is cached-aligned:
+ * "For Intel Atom processors, avoid non zero segment base address
+ * that is not aligned to cache line boundary at all cost."
+ * (Optim Ref Manual Assembly/Compiler Coding Rule 15.)
+ */
+struct stack_canary {
+ char __pad[20]; /* canary at %gs:20 */
+ unsigned long canary;
+};
+DECLARE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
#endif
#endif /* X86_64 */
@@ -703,13 +713,23 @@
rep_nop();
}
-/* Stop speculative execution: */
+/* Stop speculative execution and prefetching of modified code. */
static inline void sync_core(void)
{
int tmp;
- asm volatile("cpuid" : "=a" (tmp) : "0" (1)
- : "ebx", "ecx", "edx", "memory");
+#if defined(CONFIG_M386) || defined(CONFIG_M486)
+ if (boot_cpu_data.x86 < 5)
+ /* There is no speculative execution.
+ * jmp is a barrier to prefetching. */
+ asm volatile("jmp 1f\n1:\n" ::: "memory");
+ else
+#endif
+ /* cpuid is a barrier to speculative execution.
+ * Prefetched instructions are automatically
+ * invalidated when modified. */
+ asm volatile("cpuid" : "=a" (tmp) : "0" (1)
+ : "ebx", "ecx", "edx", "memory");
}
static inline void __monitor(const void *eax, unsigned long ecx,
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 263d397..75af592 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -1,33 +1,8 @@
#ifndef _ASM_X86_SCATTERLIST_H
#define _ASM_X86_SCATTERLIST_H
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset;
- unsigned int length;
- dma_addr_t dma_address;
- unsigned int dma_length;
-};
-
-#define ARCH_HAS_SG_CHAIN
#define ISA_DMA_THRESHOLD (0x00ffffff)
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#ifdef CONFIG_X86_32
-# define sg_dma_len(sg) ((sg)->length)
-#else
-# define sg_dma_len(sg) ((sg)->dma_length)
-#endif
+#include <asm-generic/scatterlist.h>
#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
index b51413b..83c05fc 100644
--- a/arch/x86/include/asm/shmbuf.h
+++ b/arch/x86/include/asm/shmbuf.h
@@ -1,51 +1 @@
-#ifndef _ASM_X86_SHMBUF_H
-#define _ASM_X86_SHMBUF_H
-
-/*
- * The shmid64_ds structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space on 32 bit is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- *
- * Pad space on 64 bit is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
-#ifdef __i386__
- unsigned long __unused1;
-#endif
- __kernel_time_t shm_dtime; /* last detach time */
-#ifdef __i386__
- unsigned long __unused2;
-#endif
- __kernel_time_t shm_ctime; /* last change time */
-#ifdef __i386__
- unsigned long __unused3;
-#endif
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_X86_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index ca8bf2c..6b71384 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -1,60 +1 @@
-#ifndef _ASM_X86_SOCKET_H
-#define _ASM_X86_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_X86_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
index 49cc72b..def6d47 100644
--- a/arch/x86/include/asm/sockios.h
+++ b/arch/x86/include/asm/sockios.h
@@ -1,13 +1 @@
-#ifndef _ASM_X86_SOCKIOS_H
-#define _ASM_X86_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_X86_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index c2d742c..1575177 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -48,7 +48,7 @@
* head_32 for boot CPU and setup_per_cpu_areas() for others.
*/
#define GDT_STACK_CANARY_INIT \
- [GDT_ENTRY_STACK_CANARY] = { { { 0x00000018, 0x00409000 } } },
+ [GDT_ENTRY_STACK_CANARY] = GDT_ENTRY_INIT(0x4090, 0, 0x18),
/*
* Initialize the stackprotector canary value.
@@ -78,21 +78,19 @@
#ifdef CONFIG_X86_64
percpu_write(irq_stack_union.stack_canary, canary);
#else
- percpu_write(stack_canary, canary);
+ percpu_write(stack_canary.canary, canary);
#endif
}
static inline void setup_stack_canary_segment(int cpu)
{
#ifdef CONFIG_X86_32
- unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu) - 20;
+ unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
struct desc_struct desc;
desc = gdt_table[GDT_ENTRY_STACK_CANARY];
- desc.base0 = canary & 0xffff;
- desc.base1 = (canary >> 16) & 0xff;
- desc.base2 = (canary >> 24) & 0xff;
+ set_desc_base(&desc, canary);
write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
#endif
}
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 643c59b..f08f973 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -31,7 +31,7 @@
"movl %P[task_canary](%[next]), %%ebx\n\t" \
"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
#define __switch_canary_oparam \
- , [stack_canary] "=m" (per_cpu_var(stack_canary))
+ , [stack_canary] "=m" (per_cpu_var(stack_canary.canary))
#define __switch_canary_iparam \
, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
#else /* CC_STACKPROTECTOR */
@@ -150,33 +150,6 @@
#endif
#ifdef __KERNEL__
-#define _set_base(addr, base) do { unsigned long __pr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
- "rorl $16,%%edx\n\t" \
- "movb %%dl,%2\n\t" \
- "movb %%dh,%3" \
- :"=&d" (__pr) \
- :"m" (*((addr)+2)), \
- "m" (*((addr)+4)), \
- "m" (*((addr)+7)), \
- "0" (base) \
- ); } while (0)
-
-#define _set_limit(addr, limit) do { unsigned long __lr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
- "rorl $16,%%edx\n\t" \
- "movb %2,%%dh\n\t" \
- "andb $0xf0,%%dh\n\t" \
- "orb %%dh,%%dl\n\t" \
- "movb %%dl,%2" \
- :"=&d" (__lr) \
- :"m" (*(addr)), \
- "m" (*((addr)+6)), \
- "0" (limit) \
- ); } while (0)
-
-#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
-#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
extern void native_load_gs_index(unsigned);
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
index af1b70e..3935b10 100644
--- a/arch/x86/include/asm/termbits.h
+++ b/arch/x86/include/asm/termbits.h
@@ -1,198 +1 @@
-#ifndef _ASM_X86_TERMBITS_H
-#define _ASM_X86_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000 /* non standard rate */
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_X86_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index c4ee805..280d78a 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -1,114 +1 @@
-#ifndef _ASM_X86_TERMIOS_H
-#define _ASM_X86_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-
-/* intr=^C quit=^\ erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-static inline int user_termio_to_kernel_termios(struct ktermios *termios,
- struct termio __user *termio)
-{
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
- get_user(termios->c_line, &termio->c_line);
- return copy_from_user(termios->c_cc, termio->c_cc, NCC);
-}
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-static inline int kernel_termios_to_user_termio(struct termio __user *termio,
- struct ktermios *termios)
-{
- put_user((termios)->c_iflag, &(termio)->c_iflag);
- put_user((termios)->c_oflag, &(termio)->c_oflag);
- put_user((termios)->c_cflag, &(termio)->c_cflag);
- put_user((termios)->c_lflag, &(termio)->c_lflag);
- put_user((termios)->c_line, &(termio)->c_line);
- return copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);
-}
-
-static inline int user_termios_to_kernel_termios(struct ktermios *k,
- struct termios2 __user *u)
-{
- return copy_from_user(k, u, sizeof(struct termios2));
-}
-
-static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
- struct ktermios *k)
-{
- return copy_to_user(u, k, sizeof(struct termios2));
-}
-
-static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
- struct termios __user *u)
-{
- return copy_from_user(k, u, sizeof(struct termios));
-}
-
-static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
- struct ktermios *k)
-{
- return copy_to_user(u, k, sizeof(struct termios));
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_X86_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index fad7d40..d27d0a2 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -95,7 +95,7 @@
#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */
#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */
#define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */
-#define TIF_SYSCALL_FTRACE 28 /* for ftrace syscall instrumentation */
+#define TIF_SYSCALL_TRACEPOINT 28 /* syscall tracepoint instrumentation */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
@@ -118,17 +118,17 @@
#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR)
#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR)
#define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES)
-#define _TIF_SYSCALL_FTRACE (1 << TIF_SYSCALL_FTRACE)
+#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
/* work to do in syscall_trace_enter() */
#define _TIF_WORK_SYSCALL_ENTRY \
- (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_FTRACE | \
- _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP)
+ (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT | \
+ _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT)
/* work to do in syscall_trace_leave() */
#define _TIF_WORK_SYSCALL_EXIT \
(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP | \
- _TIF_SYSCALL_FTRACE)
+ _TIF_SYSCALL_TRACEPOINT)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
@@ -137,7 +137,8 @@
_TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
/* work to do on any return to user space */
-#define _TIF_ALLWORK_MASK ((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_FTRACE)
+#define _TIF_ALLWORK_MASK \
+ ((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT)
/* Only used for 64 bit */
#define _TIF_DO_NOTIFY_MASK \
@@ -213,7 +214,7 @@
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
- ti = (void *)(percpu_read(kernel_stack) +
+ ti = (void *)(percpu_read_stable(kernel_stack) +
KERNEL_STACK_OFFSET - THREAD_SIZE);
return ti;
}
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 066ef59..26d06e0 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -129,25 +129,34 @@
#endif
/* sched_domains SD_NODE_INIT for NUMA machines */
-#define SD_NODE_INIT (struct sched_domain) { \
- .min_interval = 8, \
- .max_interval = 32, \
- .busy_factor = 32, \
- .imbalance_pct = 125, \
- .cache_nice_tries = SD_CACHE_NICE_TRIES, \
- .busy_idx = 3, \
- .idle_idx = SD_IDLE_IDX, \
- .newidle_idx = SD_NEWIDLE_IDX, \
- .wake_idx = 1, \
- .forkexec_idx = SD_FORKEXEC_IDX, \
- .flags = SD_LOAD_BALANCE \
- | SD_BALANCE_EXEC \
- | SD_BALANCE_FORK \
- | SD_WAKE_AFFINE \
- | SD_WAKE_BALANCE \
- | SD_SERIALIZE, \
- .last_balance = jiffies, \
- .balance_interval = 1, \
+#define SD_NODE_INIT (struct sched_domain) { \
+ .min_interval = 8, \
+ .max_interval = 32, \
+ .busy_factor = 32, \
+ .imbalance_pct = 125, \
+ .cache_nice_tries = SD_CACHE_NICE_TRIES, \
+ .busy_idx = 3, \
+ .idle_idx = SD_IDLE_IDX, \
+ .newidle_idx = SD_NEWIDLE_IDX, \
+ .wake_idx = 1, \
+ .forkexec_idx = SD_FORKEXEC_IDX, \
+ \
+ .flags = 1*SD_LOAD_BALANCE \
+ | 1*SD_BALANCE_NEWIDLE \
+ | 1*SD_BALANCE_EXEC \
+ | 1*SD_BALANCE_FORK \
+ | 0*SD_WAKE_IDLE \
+ | 1*SD_WAKE_AFFINE \
+ | 1*SD_WAKE_BALANCE \
+ | 0*SD_SHARE_CPUPOWER \
+ | 0*SD_POWERSAVINGS_BALANCE \
+ | 0*SD_SHARE_PKG_RESOURCES \
+ | 1*SD_SERIALIZE \
+ | 1*SD_WAKE_IDLE_FAR \
+ | 0*SD_PREFER_SIBLING \
+ , \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
}
#ifdef CONFIG_X86_64_ACPI_NUMA
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index bfd74c0..4da91ad 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -81,9 +81,7 @@
void math_error(void __user *);
void math_emulate(struct math_emu_info *);
-#ifdef CONFIG_X86_32
-unsigned long patch_espfix_desc(unsigned long, unsigned long);
-#else
+#ifndef CONFIG_X86_32
asmlinkage void smp_thermal_interrupt(void);
asmlinkage void mce_threshold_interrupt(void);
#endif
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index 09b9774..df1da20 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -1,19 +1,11 @@
#ifndef _ASM_X86_TYPES_H
#define _ASM_X86_TYPES_H
-#include <asm-generic/int-ll64.h>
+#define dma_addr_t dma_addr_t
-#ifndef __ASSEMBLY__
+#include <asm-generic/types.h>
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
typedef u64 dma64_addr_t;
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
index 87324cf..b7c29c8 100644
--- a/arch/x86/include/asm/ucontext.h
+++ b/arch/x86/include/asm/ucontext.h
@@ -7,12 +7,6 @@
* sigcontext struct (uc_mcontext).
*/
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
+#include <asm-generic/ucontext.h>
#endif /* _ASM_X86_UCONTEXT_H */
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 732a3070..8deaada 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -345,6 +345,8 @@
#ifdef __KERNEL__
+#define NR_syscalls 337
+
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 900e161..b9f3c60 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -688,6 +688,12 @@
#endif /* __NO_STUBS */
#ifdef __KERNEL__
+
+#ifndef COMPILE_OFFSETS
+#include <asm/asm-offsets.h>
+#define NR_syscalls (__NR_syscall_max + 1)
+#endif
+
/*
* "Conditional" syscalls
*
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 11be5ad..272514c 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -55,6 +55,7 @@
#define SECONDARY_EXEC_ENABLE_EPT 0x00000002
#define SECONDARY_EXEC_ENABLE_VPID 0x00000020
#define SECONDARY_EXEC_WBINVD_EXITING 0x00000040
+#define SECONDARY_EXEC_UNRESTRICTED_GUEST 0x00000080
#define PIN_BASED_EXT_INTR_MASK 0x00000001
@@ -351,9 +352,16 @@
#define VMX_EPT_EXTENT_INDIVIDUAL_ADDR 0
#define VMX_EPT_EXTENT_CONTEXT 1
#define VMX_EPT_EXTENT_GLOBAL 2
+
+#define VMX_EPT_EXECUTE_ONLY_BIT (1ull)
+#define VMX_EPT_PAGE_WALK_4_BIT (1ull << 6)
+#define VMX_EPTP_UC_BIT (1ull << 8)
+#define VMX_EPTP_WB_BIT (1ull << 14)
+#define VMX_EPT_2MB_PAGE_BIT (1ull << 16)
#define VMX_EPT_EXTENT_INDIVIDUAL_BIT (1ull << 24)
#define VMX_EPT_EXTENT_CONTEXT_BIT (1ull << 25)
#define VMX_EPT_EXTENT_GLOBAL_BIT (1ull << 26)
+
#define VMX_EPT_DEFAULT_GAW 3
#define VMX_EPT_MAX_GAW 0x4
#define VMX_EPT_MT_EPTE_SHIFT 3
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a..67e929b 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -833,106 +833,6 @@
extern int es7000_plat;
#endif
-static struct {
- int gsi_base;
- int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
- return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
- if (WARN_ON(ioapic == -1))
- return -1;
- if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
- return -1;
-
- return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- return io_apic_get_unique_id(nr_ioapics, id);
- else
- return id;
-#else
- int i;
- DECLARE_BITMAP(used, 256);
- bitmap_zero(used, 256);
- for (i = 0; i < nr_ioapics; i++) {
- struct mpc_ioapic *ia = &mp_ioapics[i];
- __set_bit(ia->apicid, used);
- }
- if (!test_bit(id, used))
- return id;
- return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in table, skipping!\n");
- return 1;
- }
- return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
- int idx = 0;
-
- if (bad_ioapic(address))
- return;
-
- idx = nr_ioapics;
-
- mp_ioapics[idx].type = MP_IOAPIC;
- mp_ioapics[idx].flags = MPC_APIC_USABLE;
- mp_ioapics[idx].apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].apicid = uniq_ioapic_id(id);
- mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
- mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
- mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
- nr_ioapics++;
-}
-
int __init acpi_probe_gsi(void)
{
int idx;
@@ -947,7 +847,7 @@
max_gsi = 0;
for (idx = 0; idx < nr_ioapics; idx++) {
- gsi = mp_ioapic_routing[idx].gsi_end;
+ gsi = mp_gsi_routing[idx].gsi_end;
if (gsi > max_gsi)
max_gsi = gsi;
@@ -1179,9 +1079,8 @@
* If MPS is present, it will handle them,
* otherwise the system will stay in PIC mode
*/
- if (acpi_disabled || acpi_noirq) {
+ if (acpi_disabled || acpi_noirq)
return -ENODEV;
- }
if (!cpu_has_apic)
return -ENODEV;
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index f576587..de7353c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -2,6 +2,7 @@
#include <linux/sched.h>
#include <linux/mutex.h>
#include <linux/list.h>
+#include <linux/stringify.h>
#include <linux/kprobes.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
@@ -32,7 +33,7 @@
#define smp_alt_once 1
#endif
-static int debug_alternative;
+static int __initdata_or_module debug_alternative;
static int __init debug_alt(char *str)
{
@@ -51,7 +52,7 @@
__setup("noreplace-smp", setup_noreplace_smp);
#ifdef CONFIG_PARAVIRT
-static int noreplace_paravirt = 0;
+static int __initdata_or_module noreplace_paravirt = 0;
static int __init setup_noreplace_paravirt(char *str)
{
@@ -64,16 +65,17 @@
#define DPRINTK(fmt, args...) if (debug_alternative) \
printk(KERN_DEBUG fmt, args)
-#ifdef GENERIC_NOP1
+#if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64)
/* Use inline assembly to define this because the nops are defined
as inline assembly strings in the include files and we cannot
get them easily into strings. */
-asm("\t.section .rodata, \"a\"\nintelnops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: "
GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
GENERIC_NOP7 GENERIC_NOP8
"\t.previous");
extern const unsigned char intelnops[];
-static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+intel_nops[ASM_NOP_MAX+1] = {
NULL,
intelnops,
intelnops + 1,
@@ -87,12 +89,13 @@
#endif
#ifdef K8_NOP1
-asm("\t.section .rodata, \"a\"\nk8nops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: "
K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
K8_NOP7 K8_NOP8
"\t.previous");
extern const unsigned char k8nops[];
-static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+k8_nops[ASM_NOP_MAX+1] = {
NULL,
k8nops,
k8nops + 1,
@@ -105,13 +108,14 @@
};
#endif
-#ifdef K7_NOP1
-asm("\t.section .rodata, \"a\"\nk7nops: "
+#if defined(K7_NOP1) && !defined(CONFIG_X86_64)
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: "
K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
K7_NOP7 K7_NOP8
"\t.previous");
extern const unsigned char k7nops[];
-static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+k7_nops[ASM_NOP_MAX+1] = {
NULL,
k7nops,
k7nops + 1,
@@ -125,12 +129,13 @@
#endif
#ifdef P6_NOP1
-asm("\t.section .rodata, \"a\"\np6nops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: "
P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
P6_NOP7 P6_NOP8
"\t.previous");
extern const unsigned char p6nops[];
-static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+p6_nops[ASM_NOP_MAX+1] = {
NULL,
p6nops,
p6nops + 1,
@@ -146,7 +151,7 @@
#ifdef CONFIG_X86_64
extern char __vsyscall_0;
-const unsigned char *const *find_nop_table(void)
+static const unsigned char *const *__init_or_module find_nop_table(void)
{
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_has(X86_FEATURE_NOPL))
@@ -157,7 +162,7 @@
#else /* CONFIG_X86_64 */
-const unsigned char *const *find_nop_table(void)
+static const unsigned char *const *__init_or_module find_nop_table(void)
{
if (boot_cpu_has(X86_FEATURE_K8))
return k8_nops;
@@ -172,7 +177,7 @@
#endif /* CONFIG_X86_64 */
/* Use this to add nops to a buffer, then text_poke the whole buffer. */
-void add_nops(void *insns, unsigned int len)
+static void __init_or_module add_nops(void *insns, unsigned int len)
{
const unsigned char *const *noptable = find_nop_table();
@@ -185,10 +190,10 @@
len -= noplen;
}
}
-EXPORT_SYMBOL_GPL(add_nops);
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
extern u8 *__smp_locks[], *__smp_locks_end[];
+static void *text_poke_early(void *addr, const void *opcode, size_t len);
/* Replace instructions with better alternatives for this CPU type.
This runs before SMP is initialized to avoid SMP problems with
@@ -196,7 +201,8 @@
APs have less capabilities than the boot processor are not handled.
Tough. Make sure you disable such features by hand. */
-void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
+void __init_or_module apply_alternatives(struct alt_instr *start,
+ struct alt_instr *end)
{
struct alt_instr *a;
char insnbuf[MAX_PATCH_LEN];
@@ -279,9 +285,10 @@
static DEFINE_MUTEX(smp_alt);
static int smp_mode = 1; /* protected by smp_alt */
-void alternatives_smp_module_add(struct module *mod, char *name,
- void *locks, void *locks_end,
- void *text, void *text_end)
+void __init_or_module alternatives_smp_module_add(struct module *mod,
+ char *name,
+ void *locks, void *locks_end,
+ void *text, void *text_end)
{
struct smp_alt_module *smp;
@@ -317,7 +324,7 @@
mutex_unlock(&smp_alt);
}
-void alternatives_smp_module_del(struct module *mod)
+void __init_or_module alternatives_smp_module_del(struct module *mod)
{
struct smp_alt_module *item;
@@ -386,8 +393,8 @@
#endif
#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
- struct paravirt_patch_site *end)
+void __init_or_module apply_paravirt(struct paravirt_patch_site *start,
+ struct paravirt_patch_site *end)
{
struct paravirt_patch_site *p;
char insnbuf[MAX_PATCH_LEN];
@@ -485,13 +492,14 @@
* instructions. And on the local CPU you need to be protected again NMI or MCE
* handlers seeing an inconsistent instruction while you patch.
*/
-void *text_poke_early(void *addr, const void *opcode, size_t len)
+static void *__init_or_module text_poke_early(void *addr, const void *opcode,
+ size_t len)
{
unsigned long flags;
local_irq_save(flags);
memcpy(addr, opcode, len);
- local_irq_restore(flags);
sync_core();
+ local_irq_restore(flags);
/* Could also do a CLFLUSH here to speed up CPU recovery; but
that causes hangs on some VIA CPUs. */
return addr;
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f50..98f230f 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -41,9 +41,13 @@
static LIST_HEAD(iommu_pd_list);
static DEFINE_SPINLOCK(iommu_pd_list_lock);
-#ifdef CONFIG_IOMMU_API
+/*
+ * Domain for untranslated devices - only allocated
+ * if iommu=pt passed on kernel cmd line.
+ */
+static struct protection_domain *pt_domain;
+
static struct iommu_ops amd_iommu_ops;
-#endif
/*
* general struct to manage commands send to an IOMMU
@@ -55,16 +59,16 @@
static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
struct unity_map_entry *e);
static struct dma_ops_domain *find_protection_domain(u16 devid);
-static u64* alloc_pte(struct protection_domain *dom,
- unsigned long address, u64
- **pte_page, gfp_t gfp);
+static u64 *alloc_pte(struct protection_domain *domain,
+ unsigned long address, int end_lvl,
+ u64 **pte_page, gfp_t gfp);
static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
unsigned long start_page,
unsigned int pages);
-
-#ifndef BUS_NOTIFY_UNBOUND_DRIVER
-#define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
-#endif
+static void reset_iommu_command_buffer(struct amd_iommu *iommu);
+static u64 *fetch_pte(struct protection_domain *domain,
+ unsigned long address, int map_size);
+static void update_domain(struct protection_domain *domain);
#ifdef CONFIG_AMD_IOMMU_STATS
@@ -138,7 +142,25 @@
*
****************************************************************************/
-static void iommu_print_event(void *__evt)
+static void dump_dte_entry(u16 devid)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ pr_err("AMD-Vi: DTE[%d]: %08x\n", i,
+ amd_iommu_dev_table[devid].data[i]);
+}
+
+static void dump_command(unsigned long phys_addr)
+{
+ struct iommu_cmd *cmd = phys_to_virt(phys_addr);
+ int i;
+
+ for (i = 0; i < 4; ++i)
+ pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
+}
+
+static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
{
u32 *event = __evt;
int type = (event[1] >> EVENT_TYPE_SHIFT) & EVENT_TYPE_MASK;
@@ -147,7 +169,7 @@
int flags = (event[1] >> EVENT_FLAGS_SHIFT) & EVENT_FLAGS_MASK;
u64 address = (u64)(((u64)event[3]) << 32) | event[2];
- printk(KERN_ERR "AMD IOMMU: Event logged [");
+ printk(KERN_ERR "AMD-Vi: Event logged [");
switch (type) {
case EVENT_TYPE_ILL_DEV:
@@ -155,6 +177,7 @@
"address=0x%016llx flags=0x%04x]\n",
PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
address, flags);
+ dump_dte_entry(devid);
break;
case EVENT_TYPE_IO_FAULT:
printk("IO_PAGE_FAULT device=%02x:%02x.%x "
@@ -176,6 +199,8 @@
break;
case EVENT_TYPE_ILL_CMD:
printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+ reset_iommu_command_buffer(iommu);
+ dump_command(address);
break;
case EVENT_TYPE_CMD_HARD_ERR:
printk("COMMAND_HARDWARE_ERROR address=0x%016llx "
@@ -209,7 +234,7 @@
tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
while (head != tail) {
- iommu_print_event(iommu->evt_buf + head);
+ iommu_print_event(iommu, iommu->evt_buf + head);
head = (head + EVENT_ENTRY_SIZE) % iommu->evt_buf_size;
}
@@ -296,8 +321,11 @@
status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
- if (unlikely(i == EXIT_LOOP_COUNT))
- panic("AMD IOMMU: Completion wait loop failed\n");
+ if (unlikely(i == EXIT_LOOP_COUNT)) {
+ spin_unlock(&iommu->lock);
+ reset_iommu_command_buffer(iommu);
+ spin_lock(&iommu->lock);
+ }
}
/*
@@ -445,47 +473,78 @@
}
/*
- * This function is used to flush the IO/TLB for a given protection domain
- * on every IOMMU in the system
+ * This function flushes one domain on one IOMMU
*/
-static void iommu_flush_domain(u16 domid)
+static void flush_domain_on_iommu(struct amd_iommu *iommu, u16 domid)
{
- unsigned long flags;
- struct amd_iommu *iommu;
struct iommu_cmd cmd;
-
- INC_STATS_COUNTER(domain_flush_all);
+ unsigned long flags;
__iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
domid, 1, 1);
- for_each_iommu(iommu) {
- spin_lock_irqsave(&iommu->lock, flags);
- __iommu_queue_command(iommu, &cmd);
- __iommu_completion_wait(iommu);
- __iommu_wait_for_completion(iommu);
- spin_unlock_irqrestore(&iommu->lock, flags);
- }
+ spin_lock_irqsave(&iommu->lock, flags);
+ __iommu_queue_command(iommu, &cmd);
+ __iommu_completion_wait(iommu);
+ __iommu_wait_for_completion(iommu);
+ spin_unlock_irqrestore(&iommu->lock, flags);
}
-void amd_iommu_flush_all_domains(void)
+static void flush_all_domains_on_iommu(struct amd_iommu *iommu)
{
int i;
for (i = 1; i < MAX_DOMAIN_ID; ++i) {
if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
continue;
- iommu_flush_domain(i);
+ flush_domain_on_iommu(iommu, i);
+ }
+
+}
+
+/*
+ * This function is used to flush the IO/TLB for a given protection domain
+ * on every IOMMU in the system
+ */
+static void iommu_flush_domain(u16 domid)
+{
+ struct amd_iommu *iommu;
+
+ INC_STATS_COUNTER(domain_flush_all);
+
+ for_each_iommu(iommu)
+ flush_domain_on_iommu(iommu, domid);
+}
+
+void amd_iommu_flush_all_domains(void)
+{
+ struct amd_iommu *iommu;
+
+ for_each_iommu(iommu)
+ flush_all_domains_on_iommu(iommu);
+}
+
+static void flush_all_devices_for_iommu(struct amd_iommu *iommu)
+{
+ int i;
+
+ for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+ if (iommu != amd_iommu_rlookup_table[i])
+ continue;
+
+ iommu_queue_inv_dev_entry(iommu, i);
+ iommu_completion_wait(iommu);
}
}
-void amd_iommu_flush_all_devices(void)
+static void flush_devices_by_domain(struct protection_domain *domain)
{
struct amd_iommu *iommu;
int i;
for (i = 0; i <= amd_iommu_last_bdf; ++i) {
- if (amd_iommu_pd_table[i] == NULL)
+ if ((domain == NULL && amd_iommu_pd_table[i] == NULL) ||
+ (amd_iommu_pd_table[i] != domain))
continue;
iommu = amd_iommu_rlookup_table[i];
@@ -497,6 +556,27 @@
}
}
+static void reset_iommu_command_buffer(struct amd_iommu *iommu)
+{
+ pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
+
+ if (iommu->reset_in_progress)
+ panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+
+ iommu->reset_in_progress = true;
+
+ amd_iommu_reset_cmd_buffer(iommu);
+ flush_all_devices_for_iommu(iommu);
+ flush_all_domains_on_iommu(iommu);
+
+ iommu->reset_in_progress = false;
+}
+
+void amd_iommu_flush_all_devices(void)
+{
+ flush_devices_by_domain(NULL);
+}
+
/****************************************************************************
*
* The functions below are used the create the page table mappings for
@@ -514,18 +594,21 @@
static int iommu_map_page(struct protection_domain *dom,
unsigned long bus_addr,
unsigned long phys_addr,
- int prot)
+ int prot,
+ int map_size)
{
u64 __pte, *pte;
bus_addr = PAGE_ALIGN(bus_addr);
phys_addr = PAGE_ALIGN(phys_addr);
- /* only support 512GB address spaces for now */
- if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
+ BUG_ON(!PM_ALIGNED(map_size, bus_addr));
+ BUG_ON(!PM_ALIGNED(map_size, phys_addr));
+
+ if (!(prot & IOMMU_PROT_MASK))
return -EINVAL;
- pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
+ pte = alloc_pte(dom, bus_addr, map_size, NULL, GFP_KERNEL);
if (IOMMU_PTE_PRESENT(*pte))
return -EBUSY;
@@ -538,29 +621,18 @@
*pte = __pte;
+ update_domain(dom);
+
return 0;
}
static void iommu_unmap_page(struct protection_domain *dom,
- unsigned long bus_addr)
+ unsigned long bus_addr, int map_size)
{
- u64 *pte;
+ u64 *pte = fetch_pte(dom, bus_addr, map_size);
- pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
- return;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
- return;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
-
- *pte = 0;
+ if (pte)
+ *pte = 0;
}
/*
@@ -615,7 +687,8 @@
for (addr = e->address_start; addr < e->address_end;
addr += PAGE_SIZE) {
- ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot);
+ ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot,
+ PM_MAP_4k);
if (ret)
return ret;
/*
@@ -670,24 +743,29 @@
* This function checks if there is a PTE for a given dma address. If
* there is one, it returns the pointer to it.
*/
-static u64* fetch_pte(struct protection_domain *domain,
- unsigned long address)
+static u64 *fetch_pte(struct protection_domain *domain,
+ unsigned long address, int map_size)
{
+ int level;
u64 *pte;
- pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(address)];
+ level = domain->mode - 1;
+ pte = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
- if (!IOMMU_PTE_PRESENT(*pte))
- return NULL;
+ while (level > map_size) {
+ if (!IOMMU_PTE_PRESENT(*pte))
+ return NULL;
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+ level -= 1;
- if (!IOMMU_PTE_PRESENT(*pte))
- return NULL;
+ pte = IOMMU_PTE_PAGE(*pte);
+ pte = &pte[PM_LEVEL_INDEX(level, address)];
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+ if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
+ pte = NULL;
+ break;
+ }
+ }
return pte;
}
@@ -727,7 +805,7 @@
u64 *pte, *pte_page;
for (i = 0; i < num_ptes; ++i) {
- pte = alloc_pte(&dma_dom->domain, address,
+ pte = alloc_pte(&dma_dom->domain, address, PM_MAP_4k,
&pte_page, gfp);
if (!pte)
goto out_free;
@@ -760,16 +838,20 @@
for (i = dma_dom->aperture[index]->offset;
i < dma_dom->aperture_size;
i += PAGE_SIZE) {
- u64 *pte = fetch_pte(&dma_dom->domain, i);
+ u64 *pte = fetch_pte(&dma_dom->domain, i, PM_MAP_4k);
if (!pte || !IOMMU_PTE_PRESENT(*pte))
continue;
dma_ops_reserve_addresses(dma_dom, i << PAGE_SHIFT, 1);
}
+ update_domain(&dma_dom->domain);
+
return 0;
out_free:
+ update_domain(&dma_dom->domain);
+
free_page((unsigned long)dma_dom->aperture[index]->bitmap);
kfree(dma_dom->aperture[index]);
@@ -1009,7 +1091,7 @@
dma_dom->domain.id = domain_id_alloc();
if (dma_dom->domain.id == 0)
goto free_dma_dom;
- dma_dom->domain.mode = PAGE_MODE_3_LEVEL;
+ dma_dom->domain.mode = PAGE_MODE_2_LEVEL;
dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
dma_dom->domain.flags = PD_DMA_OPS_MASK;
dma_dom->domain.priv = dma_dom;
@@ -1063,6 +1145,41 @@
return dom;
}
+static void set_dte_entry(u16 devid, struct protection_domain *domain)
+{
+ u64 pte_root = virt_to_phys(domain->pt_root);
+
+ pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
+ << DEV_ENTRY_MODE_SHIFT;
+ pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
+
+ amd_iommu_dev_table[devid].data[2] = domain->id;
+ amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
+ amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+
+ amd_iommu_pd_table[devid] = domain;
+}
+
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
+static void __attach_device(struct amd_iommu *iommu,
+ struct protection_domain *domain,
+ u16 devid)
+{
+ /* lock domain */
+ spin_lock(&domain->lock);
+
+ /* update DTE entry */
+ set_dte_entry(devid, domain);
+
+ domain->dev_cnt += 1;
+
+ /* ready */
+ spin_unlock(&domain->lock);
+}
+
/*
* If a device is not yet associated with a domain, this function does
* assigns it visible for the hardware
@@ -1072,27 +1189,16 @@
u16 devid)
{
unsigned long flags;
- u64 pte_root = virt_to_phys(domain->pt_root);
-
- domain->dev_cnt += 1;
-
- pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
- << DEV_ENTRY_MODE_SHIFT;
- pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
write_lock_irqsave(&amd_iommu_devtable_lock, flags);
- amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
- amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
- amd_iommu_dev_table[devid].data[2] = domain->id;
-
- amd_iommu_pd_table[devid] = domain;
+ __attach_device(iommu, domain, devid);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
- /*
- * We might boot into a crash-kernel here. The crashed kernel
- * left the caches in the IOMMU dirty. So we have to flush
- * here to evict all dirty stuff.
- */
+ /*
+ * We might boot into a crash-kernel here. The crashed kernel
+ * left the caches in the IOMMU dirty. So we have to flush
+ * here to evict all dirty stuff.
+ */
iommu_queue_inv_dev_entry(iommu, devid);
iommu_flush_tlb_pde(iommu, domain->id);
}
@@ -1119,6 +1225,15 @@
/* ready */
spin_unlock(&domain->lock);
+
+ /*
+ * If we run in passthrough mode the device must be assigned to the
+ * passthrough domain if it is detached from any other domain
+ */
+ if (iommu_pass_through) {
+ struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+ __attach_device(iommu, pt_domain, devid);
+ }
}
/*
@@ -1164,6 +1279,8 @@
case BUS_NOTIFY_UNBOUND_DRIVER:
if (!domain)
goto out;
+ if (iommu_pass_through)
+ break;
detach_device(domain, devid);
break;
case BUS_NOTIFY_ADD_DEVICE:
@@ -1292,40 +1409,92 @@
return 1;
}
+static void update_device_table(struct protection_domain *domain)
+{
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+ if (amd_iommu_pd_table[i] != domain)
+ continue;
+ write_lock_irqsave(&amd_iommu_devtable_lock, flags);
+ set_dte_entry(i, domain);
+ write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+ }
+}
+
+static void update_domain(struct protection_domain *domain)
+{
+ if (!domain->updated)
+ return;
+
+ update_device_table(domain);
+ flush_devices_by_domain(domain);
+ iommu_flush_domain(domain->id);
+
+ domain->updated = false;
+}
+
/*
- * If the pte_page is not yet allocated this function is called
+ * This function is used to add another level to an IO page table. Adding
+ * another level increases the size of the address space by 9 bits to a size up
+ * to 64 bits.
*/
-static u64* alloc_pte(struct protection_domain *dom,
- unsigned long address, u64 **pte_page, gfp_t gfp)
+static bool increase_address_space(struct protection_domain *domain,
+ gfp_t gfp)
+{
+ u64 *pte;
+
+ if (domain->mode == PAGE_MODE_6_LEVEL)
+ /* address space already 64 bit large */
+ return false;
+
+ pte = (void *)get_zeroed_page(gfp);
+ if (!pte)
+ return false;
+
+ *pte = PM_LEVEL_PDE(domain->mode,
+ virt_to_phys(domain->pt_root));
+ domain->pt_root = pte;
+ domain->mode += 1;
+ domain->updated = true;
+
+ return true;
+}
+
+static u64 *alloc_pte(struct protection_domain *domain,
+ unsigned long address,
+ int end_lvl,
+ u64 **pte_page,
+ gfp_t gfp)
{
u64 *pte, *page;
+ int level;
- pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(address)];
+ while (address > PM_LEVEL_SIZE(domain->mode))
+ increase_address_space(domain, gfp);
- if (!IOMMU_PTE_PRESENT(*pte)) {
- page = (u64 *)get_zeroed_page(gfp);
- if (!page)
- return NULL;
- *pte = IOMMU_L2_PDE(virt_to_phys(page));
+ level = domain->mode - 1;
+ pte = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+
+ while (level > end_lvl) {
+ if (!IOMMU_PTE_PRESENT(*pte)) {
+ page = (u64 *)get_zeroed_page(gfp);
+ if (!page)
+ return NULL;
+ *pte = PM_LEVEL_PDE(level, virt_to_phys(page));
+ }
+
+ level -= 1;
+
+ pte = IOMMU_PTE_PAGE(*pte);
+
+ if (pte_page && level == end_lvl)
+ *pte_page = pte;
+
+ pte = &pte[PM_LEVEL_INDEX(level, address)];
}
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(address)];
-
- if (!IOMMU_PTE_PRESENT(*pte)) {
- page = (u64 *)get_zeroed_page(gfp);
- if (!page)
- return NULL;
- *pte = IOMMU_L1_PDE(virt_to_phys(page));
- }
-
- pte = IOMMU_PTE_PAGE(*pte);
-
- if (pte_page)
- *pte_page = pte;
-
- pte = &pte[IOMMU_PTE_L0_INDEX(address)];
-
return pte;
}
@@ -1344,10 +1513,13 @@
pte = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
if (!pte) {
- pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
+ pte = alloc_pte(&dom->domain, address, PM_MAP_4k, &pte_page,
+ GFP_ATOMIC);
aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
} else
- pte += IOMMU_PTE_L0_INDEX(address);
+ pte += PM_LEVEL_INDEX(0, address);
+
+ update_domain(&dom->domain);
return pte;
}
@@ -1409,7 +1581,7 @@
if (!pte)
return;
- pte += IOMMU_PTE_L0_INDEX(address);
+ pte += PM_LEVEL_INDEX(0, address);
WARN_ON(!*pte);
@@ -1988,19 +2160,47 @@
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
}
-static int amd_iommu_domain_init(struct iommu_domain *dom)
+static void protection_domain_free(struct protection_domain *domain)
+{
+ if (!domain)
+ return;
+
+ if (domain->id)
+ domain_id_free(domain->id);
+
+ kfree(domain);
+}
+
+static struct protection_domain *protection_domain_alloc(void)
{
struct protection_domain *domain;
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
- return -ENOMEM;
+ return NULL;
spin_lock_init(&domain->lock);
- domain->mode = PAGE_MODE_3_LEVEL;
domain->id = domain_id_alloc();
if (!domain->id)
+ goto out_err;
+
+ return domain;
+
+out_err:
+ kfree(domain);
+
+ return NULL;
+}
+
+static int amd_iommu_domain_init(struct iommu_domain *dom)
+{
+ struct protection_domain *domain;
+
+ domain = protection_domain_alloc();
+ if (!domain)
goto out_free;
+
+ domain->mode = PAGE_MODE_3_LEVEL;
domain->pt_root = (void *)get_zeroed_page(GFP_KERNEL);
if (!domain->pt_root)
goto out_free;
@@ -2010,7 +2210,7 @@
return 0;
out_free:
- kfree(domain);
+ protection_domain_free(domain);
return -ENOMEM;
}
@@ -2115,7 +2315,7 @@
paddr &= PAGE_MASK;
for (i = 0; i < npages; ++i) {
- ret = iommu_map_page(domain, iova, paddr, prot);
+ ret = iommu_map_page(domain, iova, paddr, prot, PM_MAP_4k);
if (ret)
return ret;
@@ -2136,7 +2336,7 @@
iova &= PAGE_MASK;
for (i = 0; i < npages; ++i) {
- iommu_unmap_page(domain, iova);
+ iommu_unmap_page(domain, iova, PM_MAP_4k);
iova += PAGE_SIZE;
}
@@ -2151,21 +2351,9 @@
phys_addr_t paddr;
u64 *pte;
- pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(iova)];
+ pte = fetch_pte(domain, iova, PM_MAP_4k);
- if (!IOMMU_PTE_PRESENT(*pte))
- return 0;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L1_INDEX(iova)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
- return 0;
-
- pte = IOMMU_PTE_PAGE(*pte);
- pte = &pte[IOMMU_PTE_L0_INDEX(iova)];
-
- if (!IOMMU_PTE_PRESENT(*pte))
+ if (!pte || !IOMMU_PTE_PRESENT(*pte))
return 0;
paddr = *pte & IOMMU_PAGE_MASK;
@@ -2191,3 +2379,46 @@
.domain_has_cap = amd_iommu_domain_has_cap,
};
+/*****************************************************************************
+ *
+ * The next functions do a basic initialization of IOMMU for pass through
+ * mode
+ *
+ * In passthrough mode the IOMMU is initialized and enabled but not used for
+ * DMA-API translation.
+ *
+ *****************************************************************************/
+
+int __init amd_iommu_init_passthrough(void)
+{
+ struct pci_dev *dev = NULL;
+ u16 devid, devid2;
+
+ /* allocate passthroug domain */
+ pt_domain = protection_domain_alloc();
+ if (!pt_domain)
+ return -ENOMEM;
+
+ pt_domain->mode |= PAGE_MODE_NONE;
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ struct amd_iommu *iommu;
+
+ devid = calc_devid(dev->bus->number, dev->devfn);
+ if (devid > amd_iommu_last_bdf)
+ continue;
+
+ devid2 = amd_iommu_alias_table[devid];
+
+ iommu = amd_iommu_rlookup_table[devid2];
+ if (!iommu)
+ continue;
+
+ __attach_device(iommu, pt_domain, devid);
+ __attach_device(iommu, pt_domain, devid2);
+ }
+
+ pr_info("AMD-Vi: Initialized for Passthrough Mode\n");
+
+ return 0;
+}
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e9..b4b61d4 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -252,7 +252,7 @@
/* Function to enable the hardware */
static void iommu_enable(struct amd_iommu *iommu)
{
- printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at %s cap 0x%hx\n",
+ printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
dev_name(&iommu->dev->dev), iommu->cap_ptr);
iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
@@ -435,6 +435,20 @@
}
/*
+ * This function resets the command buffer if the IOMMU stopped fetching
+ * commands from it.
+ */
+void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu)
+{
+ iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
+
+ writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+ iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+}
+
+/*
* This function writes the command buffer address to the hardware and
* enables it.
*/
@@ -450,11 +464,7 @@
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
- /* set head and tail to zero manually */
- writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
- writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-
- iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+ amd_iommu_reset_cmd_buffer(iommu);
}
static void __init free_command_buffer(struct amd_iommu *iommu)
@@ -858,7 +868,7 @@
switch (*p) {
case ACPI_IVHD_TYPE:
- DUMP_printk("IOMMU: device: %02x:%02x.%01x cap: %04x "
+ DUMP_printk("device: %02x:%02x.%01x cap: %04x "
"seg: %d flags: %01x info %04x\n",
PCI_BUS(h->devid), PCI_SLOT(h->devid),
PCI_FUNC(h->devid), h->cap_ptr,
@@ -902,7 +912,7 @@
r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
IRQF_SAMPLE_RANDOM,
- "AMD IOMMU",
+ "AMD-Vi",
NULL);
if (r) {
@@ -1150,7 +1160,7 @@
if (no_iommu) {
- printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
+ printk(KERN_INFO "AMD-Vi disabled by kernel command line\n");
return 0;
}
@@ -1242,22 +1252,28 @@
if (ret)
goto free;
- ret = amd_iommu_init_dma_ops();
+ if (iommu_pass_through)
+ ret = amd_iommu_init_passthrough();
+ else
+ ret = amd_iommu_init_dma_ops();
if (ret)
goto free;
enable_iommus();
- printk(KERN_INFO "AMD IOMMU: device isolation ");
+ if (iommu_pass_through)
+ goto out;
+
+ printk(KERN_INFO "AMD-Vi: device isolation ");
if (amd_iommu_isolate)
printk("enabled\n");
else
printk("disabled\n");
if (amd_iommu_unmap_flush)
- printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n");
+ printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
else
- printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n");
+ printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
out:
return ret;
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 676debf..128111d 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -20,6 +20,7 @@
#include <linux/bitops.h>
#include <linux/ioport.h>
#include <linux/suspend.h>
+#include <linux/kmemleak.h>
#include <asm/e820.h>
#include <asm/io.h>
#include <asm/iommu.h>
@@ -94,6 +95,11 @@
* code for safe
*/
p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
+ /*
+ * Kmemleak should not scan this block as it may not be mapped via the
+ * kernel direct mapping.
+ */
+ kmemleak_ignore(p);
if (!p || __pa(p)+aper_size > 0xffffffff) {
printk(KERN_ERR
"Cannot allocate aperture memory hole (%p,%uK)\n",
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0a1c283..159740d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -49,6 +49,7 @@
#include <asm/mtrr.h>
#include <asm/smp.h>
#include <asm/mce.h>
+#include <asm/kvm_para.h>
unsigned int num_processors;
@@ -1361,52 +1362,80 @@
}
#endif /* CONFIG_X86_X2APIC */
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
{
#ifdef CONFIG_INTR_REMAP
- int ret;
- unsigned long flags;
- struct IO_APIC_route_entry **ioapic_entries = NULL;
-
- ret = dmar_table_init();
- if (ret) {
- pr_debug("dmar_table_init() failed with %d:\n", ret);
- goto ir_failed;
- }
-
if (!intr_remapping_supported()) {
pr_debug("intr-remapping not supported\n");
- goto ir_failed;
+ return 0;
}
-
if (!x2apic_preenabled && skip_ioapic_setup) {
pr_info("Skipped enabling intr-remap because of skipping "
"io-apic setup\n");
- return;
+ return 0;
}
+ if (enable_intr_remapping(x2apic_supported()))
+ return 0;
+
+ pr_info("Enabled Interrupt-remapping\n");
+
+ return 1;
+
+#endif
+ return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+ unsigned long flags;
+ struct IO_APIC_route_entry **ioapic_entries = NULL;
+ int ret, x2apic_enabled = 0;
+ int dmar_table_init_ret = 0;
+
+#ifdef CONFIG_INTR_REMAP
+ dmar_table_init_ret = dmar_table_init();
+ if (dmar_table_init_ret)
+ pr_debug("dmar_table_init() failed with %d:\n",
+ dmar_table_init_ret);
+#endif
+
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
- pr_info("Allocate ioapic_entries failed: %d\n", ret);
- goto end;
+ pr_err("Allocate ioapic_entries failed\n");
+ goto out;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
pr_info("Saving IO-APIC state failed: %d\n", ret);
- goto end;
+ goto out;
}
local_irq_save(flags);
- mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
+ mask_IO_APIC_setup(ioapic_entries);
- ret = enable_intr_remapping(x2apic_supported());
- if (ret)
- goto end_restore;
+ if (dmar_table_init_ret)
+ ret = 0;
+ else
+ ret = enable_IR();
- pr_info("Enabled Interrupt-remapping\n");
+ if (!ret) {
+ /* IR is required if there is APIC ID > 255 even when running
+ * under KVM
+ */
+ if (max_physical_apicid > 255 || !kvm_para_available())
+ goto nox2apic;
+ /*
+ * without IR all CPUs can be addressed by IOAPIC/MSI
+ * only in physical mode
+ */
+ x2apic_force_phys();
+ }
+
+ x2apic_enabled = 1;
if (x2apic_supported() && !x2apic_mode) {
x2apic_mode = 1;
@@ -1414,41 +1443,25 @@
pr_info("Enabled x2apic\n");
}
-end_restore:
- if (ret)
- /*
- * IR enabling failed
- */
+nox2apic:
+ if (!ret) /* IR enabling failed */
restore_IO_APIC_setup(ioapic_entries);
-
unmask_8259A();
local_irq_restore(flags);
-end:
+out:
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
- if (!ret)
+ if (x2apic_enabled)
return;
-ir_failed:
if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
+ panic("x2apic: enabled by BIOS but kernel init failed.");
else if (cpu_has_x2apic)
- pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
- if (!cpu_has_x2apic)
- return;
-
- if (x2apic_preenabled)
- panic("x2apic enabled prior OS handover,"
- " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
- return;
+ pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
}
-
#ifdef CONFIG_X86_64
/*
* Detect and enable local APICs on non-SMP boards.
@@ -1549,8 +1562,6 @@
#ifdef CONFIG_X86_64
void __init early_init_lapic_mapping(void)
{
- unsigned long phys_addr;
-
/*
* If no local APIC can be found then go out
* : it means there is no mpatable and MADT
@@ -1558,11 +1569,9 @@
if (!smp_found_config)
return;
- phys_addr = mp_lapic_addr;
-
- set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+ set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, phys_addr);
+ APIC_BASE, mp_lapic_addr);
/*
* Fetch the APIC ID of the BSP in case we have a
@@ -1651,7 +1660,6 @@
APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
boot_cpu_physical_apicid);
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
return -1;
}
#endif
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 8952a58..89174f8 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -167,7 +167,7 @@
{
/* MPENTIUMIII */
if (boot_cpu_data.x86 == 6 &&
- (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11))
+ (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
return 1;
return 0;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5..3c8f9e7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -66,6 +66,8 @@
#include <asm/apic.h>
#define __apicdebuginit(type) static type __init
+#define for_each_irq_pin(entry, head) \
+ for (entry = head; entry; entry = entry->next)
/*
* Is the SiS APIC rmw bug present ?
@@ -85,6 +87,9 @@
struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
+
/* MP IRQ source entries */
struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
@@ -116,15 +121,6 @@
}
early_param("noapic", parse_noapic);
-struct irq_pin_list;
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
struct irq_pin_list {
int apic, pin;
struct irq_pin_list *next;
@@ -139,6 +135,11 @@
return pin;
}
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
struct irq_cfg {
struct irq_pin_list *irq_2_pin;
cpumask_var_t domain;
@@ -414,13 +415,10 @@
unsigned long flags;
spin_lock_irqsave(&ioapic_lock, flags);
- entry = cfg->irq_2_pin;
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
int pin;
- if (!entry)
- break;
pin = entry->pin;
reg = io_apic_read(entry->apic, 0x10 + pin*2);
/* Is the remote IRR bit set? */
@@ -428,9 +426,6 @@
spin_unlock_irqrestore(&ioapic_lock, flags);
return true;
}
- if (!entry->next)
- break;
- entry = entry->next;
}
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -498,72 +493,68 @@
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int
+add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin)
{
- struct irq_pin_list *entry;
+ struct irq_pin_list **last, *entry;
- entry = cfg->irq_2_pin;
- if (!entry) {
- entry = get_one_free_irq_2_pin(node);
- if (!entry) {
- printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
- apic, pin);
- return;
- }
- cfg->irq_2_pin = entry;
- entry->apic = apic;
- entry->pin = pin;
- return;
- }
-
- while (entry->next) {
- /* not again, please */
+ /* don't allow duplicates */
+ last = &cfg->irq_2_pin;
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
if (entry->apic == apic && entry->pin == pin)
- return;
-
- entry = entry->next;
+ return 0;
+ last = &entry->next;
}
- entry->next = get_one_free_irq_2_pin(node);
- entry = entry->next;
+ entry = get_one_free_irq_2_pin(node);
+ if (!entry) {
+ printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
+ node, apic, pin);
+ return -ENOMEM;
+ }
entry->apic = apic;
entry->pin = pin;
+
+ *last = entry;
+ return 0;
+}
+
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+{
+ if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin))
+ panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
}
/*
* Reroute an IRQ to a different pin.
*/
static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
- int oldapic, int oldpin,
- int newapic, int newpin)
+ int oldapic, int oldpin,
+ int newapic, int newpin)
{
- struct irq_pin_list *entry = cfg->irq_2_pin;
- int replaced = 0;
+ struct irq_pin_list *entry;
- while (entry) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
if (entry->apic == oldapic && entry->pin == oldpin) {
entry->apic = newapic;
entry->pin = newpin;
- replaced = 1;
/* every one is different, right? */
- break;
+ return;
}
- entry = entry->next;
}
- /* why? call replace before add? */
- if (!replaced)
- add_pin_to_irq_node(cfg, node, newapic, newpin);
+ /* old apic/pin didn't exist, so just add new ones */
+ add_pin_to_irq_node(cfg, node, newapic, newpin);
}
-static inline void io_apic_modify_irq(struct irq_cfg *cfg,
- int mask_and, int mask_or,
- void (*final)(struct irq_pin_list *entry))
+static void io_apic_modify_irq(struct irq_cfg *cfg,
+ int mask_and, int mask_or,
+ void (*final)(struct irq_pin_list *entry))
{
int pin;
struct irq_pin_list *entry;
- for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
pin = entry->pin;
reg = io_apic_read(entry->apic, 0x10 + pin * 2);
@@ -580,7 +571,6 @@
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
}
-#ifdef CONFIG_X86_64
static void io_apic_sync(struct irq_pin_list *entry)
{
/*
@@ -596,11 +586,6 @@
{
io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
}
-#else /* CONFIG_X86_32 */
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
- io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
-}
static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
{
@@ -613,7 +598,6 @@
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
}
-#endif /* CONFIG_X86_32 */
static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
{
@@ -1702,12 +1686,8 @@
if (!entry)
continue;
printk(KERN_DEBUG "IRQ%d ", irq);
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin)
printk("-> %d:%d", entry->apic, entry->pin);
- if (!entry->next)
- break;
- entry = entry->next;
- }
printk("\n");
}
@@ -2211,7 +2191,6 @@
return was_pending;
}
-#ifdef CONFIG_X86_64
static int ioapic_retrigger_irq(unsigned int irq)
{
@@ -2224,14 +2203,6 @@
return 1;
}
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
- apic->send_IPI_self(irq_cfg(irq)->vector);
-
- return 1;
-}
-#endif
/*
* Level and edge triggered IO-APIC interrupts need different handling,
@@ -2269,13 +2240,9 @@
struct irq_pin_list *entry;
u8 vector = cfg->vector;
- entry = cfg->irq_2_pin;
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
- if (!entry)
- break;
-
apic = entry->apic;
pin = entry->pin;
/*
@@ -2288,9 +2255,6 @@
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
io_apic_modify(apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = entry->next;
}
}
@@ -2515,11 +2479,8 @@
static void ack_apic_level(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
-
-#ifdef CONFIG_X86_32
unsigned long v;
int i;
-#endif
struct irq_cfg *cfg;
int do_unmask_irq = 0;
@@ -2532,31 +2493,28 @@
}
#endif
-#ifdef CONFIG_X86_32
/*
- * It appears there is an erratum which affects at least version 0x11
- * of I/O APIC (that's the 82093AA and cores integrated into various
- * chipsets). Under certain conditions a level-triggered interrupt is
- * erroneously delivered as edge-triggered one but the respective IRR
- * bit gets set nevertheless. As a result the I/O unit expects an EOI
- * message but it will never arrive and further interrupts are blocked
- * from the source. The exact reason is so far unknown, but the
- * phenomenon was observed when two consecutive interrupt requests
- * from a given source get delivered to the same CPU and the source is
- * temporarily disabled in between.
- *
- * A workaround is to simulate an EOI message manually. We achieve it
- * by setting the trigger mode to edge and then to level when the edge
- * trigger mode gets detected in the TMR of a local APIC for a
- * level-triggered interrupt. We mask the source for the time of the
- * operation to prevent an edge-triggered interrupt escaping meanwhile.
- * The idea is from Manfred Spraul. --macro
- */
+ * It appears there is an erratum which affects at least version 0x11
+ * of I/O APIC (that's the 82093AA and cores integrated into various
+ * chipsets). Under certain conditions a level-triggered interrupt is
+ * erroneously delivered as edge-triggered one but the respective IRR
+ * bit gets set nevertheless. As a result the I/O unit expects an EOI
+ * message but it will never arrive and further interrupts are blocked
+ * from the source. The exact reason is so far unknown, but the
+ * phenomenon was observed when two consecutive interrupt requests
+ * from a given source get delivered to the same CPU and the source is
+ * temporarily disabled in between.
+ *
+ * A workaround is to simulate an EOI message manually. We achieve it
+ * by setting the trigger mode to edge and then to level when the edge
+ * trigger mode gets detected in the TMR of a local APIC for a
+ * level-triggered interrupt. We mask the source for the time of the
+ * operation to prevent an edge-triggered interrupt escaping meanwhile.
+ * The idea is from Manfred Spraul. --macro
+ */
cfg = desc->chip_data;
i = cfg->vector;
-
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-#endif
/*
* We must acknowledge the irq before we move it or the acknowledge will
@@ -2598,7 +2556,7 @@
unmask_IO_APIC_irq_desc(desc);
}
-#ifdef CONFIG_X86_32
+ /* Tail end of version 0x11 I/O APIC bug workaround */
if (!(v & (1 << (i & 0x1f)))) {
atomic_inc(&irq_mis_count);
spin_lock(&ioapic_lock);
@@ -2606,26 +2564,15 @@
__unmask_and_level_IO_APIC_irq(cfg);
spin_unlock(&ioapic_lock);
}
-#endif
}
#ifdef CONFIG_INTR_REMAP
static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
{
- int apic, pin;
struct irq_pin_list *entry;
- entry = cfg->irq_2_pin;
- for (;;) {
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- io_apic_eoi(apic, pin);
- entry = entry->next;
- }
+ for_each_irq_pin(entry, cfg->irq_2_pin)
+ io_apic_eoi(entry->apic, entry->pin);
}
static void
@@ -3241,8 +3188,7 @@
cfg = desc->chip_data;
dynamic_irq_cleanup(irq);
/* connect back irq_cfg */
- if (desc)
- desc->chip_data = cfg;
+ desc->chip_data = cfg;
free_irte(irq);
spin_lock_irqsave(&vector_lock, flags);
@@ -3912,7 +3858,11 @@
*/
if (irq >= NR_IRQS_LEGACY) {
cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
+ if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
+ printk(KERN_INFO "can not add pin %d for irq %d\n",
+ pin, irq);
+ return 0;
+ }
}
setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
@@ -3941,11 +3891,28 @@
return __io_apic_set_pci_routing(dev, irq, irq_attr);
}
-/* --------------------------------------------------------------------------
- ACPI-based IOAPIC Configuration
- -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return io_apic_get_unique_id(nr_ioapics, id);
+ else
+ return id;
+#else
+ int i;
+ DECLARE_BITMAP(used, 256);
-#ifdef CONFIG_ACPI
+ bitmap_zero(used, 256);
+ for (i = 0; i < nr_ioapics; i++) {
+ struct mpc_ioapic *ia = &mp_ioapics[i];
+ __set_bit(ia->apicid, used);
+ }
+ if (!test_bit(id, used))
+ return id;
+ return find_first_zero_bit(used, 256);
+#endif
+}
#ifdef CONFIG_X86_32
int __init io_apic_get_unique_id(int ioapic, int apic_id)
@@ -4054,8 +4021,6 @@
return 0;
}
-#endif /* CONFIG_ACPI */
-
/*
* This function currently is only a helper for the i386 smp boot process where
* we need to reprogram the ioredtbls to cater for the cpus which have come online
@@ -4109,7 +4074,7 @@
static struct resource *ioapic_resources;
-static struct resource * __init ioapic_setup_resources(void)
+static struct resource * __init ioapic_setup_resources(int nr_ioapics)
{
unsigned long n;
struct resource *res;
@@ -4125,15 +4090,13 @@
mem = alloc_bootmem(n);
res = (void *)mem;
- if (mem != NULL) {
- mem += sizeof(struct resource) * nr_ioapics;
+ mem += sizeof(struct resource) * nr_ioapics;
- for (i = 0; i < nr_ioapics; i++) {
- res[i].name = mem;
- res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- sprintf(mem, "IOAPIC %u", i);
- mem += IOAPIC_RESOURCE_NAME_SIZE;
- }
+ for (i = 0; i < nr_ioapics; i++) {
+ res[i].name = mem;
+ res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ sprintf(mem, "IOAPIC %u", i);
+ mem += IOAPIC_RESOURCE_NAME_SIZE;
}
ioapic_resources = res;
@@ -4147,7 +4110,7 @@
struct resource *ioapic_res;
int i;
- ioapic_res = ioapic_setup_resources();
+ ioapic_res = ioapic_setup_resources(nr_ioapics);
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].apicaddr;
@@ -4176,11 +4139,9 @@
__fix_to_virt(idx), ioapic_phys);
idx++;
- if (ioapic_res != NULL) {
- ioapic_res->start = ioapic_phys;
- ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
- ioapic_res++;
- }
+ ioapic_res->start = ioapic_phys;
+ ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+ ioapic_res++;
}
}
@@ -4201,3 +4162,76 @@
r++;
}
}
+
+int mp_find_ioapic(int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_gsi_routing[i].gsi_base)
+ && (gsi <= mp_gsi_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+ if (WARN_ON(ioapic == -1))
+ return -1;
+ if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+ return -1;
+
+ return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+ "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+ return 1;
+ }
+ if (!address) {
+ printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+
+ if (bad_ioapic(address))
+ return;
+
+ idx = nr_ioapics;
+
+ mp_ioapics[idx].type = MP_IOAPIC;
+ mp_ioapics[idx].flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].apicid = io_apic_unique_id(id);
+ mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_gsi_routing[idx].gsi_base = gsi_base;
+ mp_gsi_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+ mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+ mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+ nr_ioapics++;
+}
diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index 6ef00ba..08385e0 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -153,7 +153,7 @@
{
int apicid, cpuid;
- if (!boot_cpu_has(X86_FEATURE_APIC))
+ if (!cpu_has_apic)
return 0;
apicid = hard_smp_processor_id();
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index b3025b4..db72202 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -39,7 +39,7 @@
int unknown_nmi_panic;
int nmi_watchdog_enabled;
-static cpumask_var_t backtrace_mask;
+static cpumask_t backtrace_mask __read_mostly;
/* nmi_active:
* >0: the lapic NMI watchdog is active, but can be disabled
@@ -138,7 +138,6 @@
if (!prev_nmi_count)
goto error;
- alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
printk(KERN_INFO "Testing NMI watchdog ... ");
#ifdef CONFIG_SMP
@@ -415,14 +414,17 @@
}
/* We can be called before check_nmi_watchdog, hence NULL check. */
- if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
+ if (cpumask_test_cpu(cpu, &backtrace_mask)) {
static DEFINE_SPINLOCK(lock); /* Serialise the printks */
spin_lock(&lock);
printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
+ show_regs(regs);
dump_stack();
spin_unlock(&lock);
- cpumask_clear_cpu(cpu, backtrace_mask);
+ cpumask_clear_cpu(cpu, &backtrace_mask);
+
+ rc = 1;
}
/* Could check oops_in_progress here too, but it's safer not to */
@@ -552,14 +554,18 @@
return 0;
}
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
{
int i;
- cpumask_copy(backtrace_mask, cpu_online_mask);
+ cpumask_copy(&backtrace_mask, cpu_online_mask);
+
+ printk(KERN_INFO "sending NMI to all CPUs:\n");
+ apic->send_IPI_all(NMI_VECTOR);
+
/* Wait for up to 10 seconds for all CPUs to do the backtrace */
for (i = 0; i < 10 * 1000; i++) {
- if (cpumask_empty(backtrace_mask))
+ if (cpumask_empty(&backtrace_mask))
break;
mdelay(1);
}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880..65edc18 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -44,17 +44,22 @@
NULL,
};
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+ return hard_smp_processor_id() >> index_msb;
+}
+
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_X2APIC
- if (x2apic_mode && (apic != &apic_x2apic_phys &&
+ if (x2apic_mode
#ifdef CONFIG_X86_UV
- apic != &apic_x2apic_uv_x &&
+ && apic != &apic_x2apic_uv_x
#endif
- apic != &apic_x2apic_cluster)) {
+ ) {
if (x2apic_phys)
apic = &apic_x2apic_phys;
else
@@ -69,6 +74,11 @@
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
}
+ if (is_vsmp_box()) {
+ /* need to update phys_pkg_id */
+ apic->phys_pkg_id = apicid_phys_pkg_id;
+ }
+
/*
* Now that apic routing model is selected, configure the
* fault handling for intr remapping.
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 442b550..151ace6 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,15 @@
static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
static struct apm_user *user_list;
static DEFINE_SPINLOCK(user_list_lock);
-static const struct desc_struct bad_bios_desc = { { { 0, 0x00409200 } } };
+
+/*
+ * Set up a segment that references the real mode segment 0x40
+ * that extends up to the end of page zero (that we have reserved).
+ * This is for buggy BIOS's that refer to (real mode) segment 0x40
+ * even though they are called in protected mode.
+ */
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092,
+ (unsigned long)__va(0x400UL), PAGE_SIZE - 0x400 - 1);
static const char driver_version[] = "1.16ac"; /* no spaces */
@@ -2332,15 +2340,6 @@
pm_flags |= PM_APM;
/*
- * Set up a segment that references the real mode segment 0x40
- * that extends up to the end of page zero (that we have reserved).
- * This is for buggy BIOS's that refer to (real mode) segment 0x40
- * even though they are called in protected mode.
- */
- set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
- _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
-
- /*
* Set up the long jump entry point to the APM BIOS, which is called
* from inline assembly.
*/
@@ -2358,12 +2357,12 @@
* code to that CPU.
*/
gdt = get_cpu_gdt_table(0);
- set_base(gdt[APM_CS >> 3],
- __va((unsigned long)apm_info.bios.cseg << 4));
- set_base(gdt[APM_CS_16 >> 3],
- __va((unsigned long)apm_info.bios.cseg_16 << 4));
- set_base(gdt[APM_DS >> 3],
- __va((unsigned long)apm_info.bios.dseg << 4));
+ set_desc_base(&gdt[APM_CS >> 3],
+ (unsigned long)__va((unsigned long)apm_info.bios.cseg << 4));
+ set_desc_base(&gdt[APM_CS_16 >> 3],
+ (unsigned long)__va((unsigned long)apm_info.bios.cseg_16 << 4));
+ set_desc_base(&gdt[APM_DS >> 3],
+ (unsigned long)__va((unsigned long)apm_info.bios.dseg << 4));
proc_create("apm", 0, NULL, &apm_file_ops);
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 898ecc4..4a6aeed 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -3,6 +3,7 @@
* This code generates raw asm output which is post-processed to extract
* and format the required data.
*/
+#define COMPILE_OFFSETS
#include <linux/crypto.h>
#include <linux/sched.h>
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3efcb2b..c1f253d 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -7,6 +7,10 @@
CFLAGS_REMOVE_common.o = -pg
endif
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o := $(nostackp)
+
obj-y := intel_cacheinfo.o addon_cpuid_features.o
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 63fddcd0..22a47c8 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -2,7 +2,7 @@
#include <linux/bitops.h>
#include <linux/mm.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/processor.h>
#include <asm/apic.h>
#include <asm/cpu.h>
@@ -45,8 +45,8 @@
#define CBAR_ENB (0x80000000)
#define CBAR_KEY (0X000000CB)
if (c->x86_model == 9 || c->x86_model == 10) {
- if (inl (CBAR) & CBAR_ENB)
- outl (0 | CBAR_KEY, CBAR);
+ if (inl(CBAR) & CBAR_ENB)
+ outl(0 | CBAR_KEY, CBAR);
}
}
@@ -87,9 +87,10 @@
d = d2-d;
if (d > 20*K6_BUG_LOOP)
- printk("system stability may be impaired when more than 32 MB are used.\n");
+ printk(KERN_CONT
+ "system stability may be impaired when more than 32 MB are used.\n");
else
- printk("probably OK (after B9730xxxx).\n");
+ printk(KERN_CONT "probably OK (after B9730xxxx).\n");
printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
}
@@ -219,8 +220,9 @@
if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
rdmsr(MSR_K7_CLK_CTL, l, h);
if ((l & 0xfff00000) != 0x20000000) {
- printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
- ((l & 0x000fffff)|0x20000000));
+ printk(KERN_INFO
+ "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
+ l, ((l & 0x000fffff)|0x20000000));
wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
}
}
@@ -251,6 +253,64 @@
#endif
/*
+ * Fixup core topology information for AMD multi-node processors.
+ * Assumption 1: Number of cores in each internal node is the same.
+ * Assumption 2: Mixed systems with both single-node and dual-node
+ * processors are not supported.
+ */
+#ifdef CONFIG_X86_HT
+static void __cpuinit amd_fixup_dcm(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_PCI
+ u32 t, cpn;
+ u8 n, n_id;
+ int cpu = smp_processor_id();
+
+ /* fixup topology information only once for a core */
+ if (cpu_has(c, X86_FEATURE_AMD_DCM))
+ return;
+
+ /* check for multi-node processor on boot cpu */
+ t = read_pci_config(0, 24, 3, 0xe8);
+ if (!(t & (1 << 29)))
+ return;
+
+ set_cpu_cap(c, X86_FEATURE_AMD_DCM);
+
+ /* cores per node: each internal node has half the number of cores */
+ cpn = c->x86_max_cores >> 1;
+
+ /* even-numbered NB_id of this dual-node processor */
+ n = c->phys_proc_id << 1;
+
+ /*
+ * determine internal node id and assign cores fifty-fifty to
+ * each node of the dual-node processor
+ */
+ t = read_pci_config(0, 24 + n, 3, 0xe8);
+ n = (t>>30) & 0x3;
+ if (n == 0) {
+ if (c->cpu_core_id < cpn)
+ n_id = 0;
+ else
+ n_id = 1;
+ } else {
+ if (c->cpu_core_id < cpn)
+ n_id = 1;
+ else
+ n_id = 0;
+ }
+
+ /* compute entire NodeID, use llc_shared_map to store sibling info */
+ per_cpu(cpu_llc_id, cpu) = (c->phys_proc_id << 1) + n_id;
+
+ /* fixup core id to be in range from 0 to cpn */
+ c->cpu_core_id = c->cpu_core_id % cpn;
+#endif
+}
+#endif
+
+/*
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
* Assumes number of cores is a power of two.
*/
@@ -267,6 +327,9 @@
c->phys_proc_id = c->initial_apicid >> bits;
/* use socket ID also for last level cache */
per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
+ /* fixup topology information on multi-node processors */
+ if ((c->x86 == 0x10) && (c->x86_model == 9))
+ amd_fixup_dcm(c);
#endif
}
@@ -275,9 +338,10 @@
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
int cpu = smp_processor_id();
int node;
- unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
+ unsigned apicid = c->apicid;
- node = c->phys_proc_id;
+ node = per_cpu(cpu_llc_id, cpu);
+
if (apicid_to_node[apicid] != NUMA_NO_NODE)
node = apicid_to_node[apicid];
if (!node_online(node)) {
@@ -398,18 +462,30 @@
u32 level;
level = cpuid_eax(1);
- if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+ if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
/*
* Some BIOSes incorrectly force this feature, but only K8
* revision D (model = 0x14) and later actually support it.
+ * (AMD Erratum #110, docId: 25759).
*/
- if (c->x86_model < 0x14)
+ if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
+ u64 val;
+
clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
+ if (!rdmsrl_amd_safe(0xc001100d, &val)) {
+ val &= ~(1ULL << 32);
+ wrmsrl_amd_safe(0xc001100d, val);
+ }
+ }
+
}
if (c->x86 == 0x10 || c->x86 == 0x11)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+ /* get apicid instead of initial apic id from cpuid */
+ c->apicid = hard_smp_processor_id();
#else
/*
@@ -494,27 +570,30 @@
* benefit in doing so.
*/
if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
- printk(KERN_DEBUG "tseg: %010llx\n", tseg);
- if ((tseg>>PMD_SHIFT) <
+ printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+ if ((tseg>>PMD_SHIFT) <
(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
- ((tseg>>PMD_SHIFT) <
+ ((tseg>>PMD_SHIFT) <
(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
- (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
- set_memory_4k((unsigned long)__va(tseg), 1);
+ (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+ set_memory_4k((unsigned long)__va(tseg), 1);
}
}
#endif
}
#ifdef CONFIG_X86_32
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c,
+ unsigned int size)
{
/* AMD errata T13 (order #21922) */
if ((c->x86 == 6)) {
- if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
+ /* Duron Rev A0 */
+ if (c->x86_model == 3 && c->x86_mask == 0)
size = 64;
+ /* Tbird rev A1/A2 */
if (c->x86_model == 4 &&
- (c->x86_mask == 0 || c->x86_mask == 1)) /* Tbird rev A1/A2 */
+ (c->x86_mask == 0 || c->x86_mask == 1))
size = 256;
}
return size;
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index c8e315f..01a2652 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -81,7 +81,7 @@
boot_cpu_data.fdiv_bug = fdiv_bug;
if (boot_cpu_data.fdiv_bug)
- printk("Hmm, FPU with FDIV bug.\n");
+ printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");
}
static void __init check_hlt(void)
@@ -98,7 +98,7 @@
halt();
halt();
halt();
- printk("OK.\n");
+ printk(KERN_CONT "OK.\n");
}
/*
@@ -122,9 +122,9 @@
* CPU hard. Too bad.
*/
if (res != 12345678)
- printk("Buggy.\n");
+ printk(KERN_CONT "Buggy.\n");
else
- printk("OK.\n");
+ printk(KERN_CONT "OK.\n");
#endif
}
@@ -156,7 +156,7 @@
{
identify_boot_cpu();
#ifndef CONFIG_SMP
- printk("CPU: ");
+ printk(KERN_INFO "CPU: ");
print_cpu_info(&boot_cpu_data);
#endif
check_config();
diff --git a/arch/x86/kernel/cpu/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c
index 9a3ed06..04f0fe5 100644
--- a/arch/x86/kernel/cpu/bugs_64.c
+++ b/arch/x86/kernel/cpu/bugs_64.c
@@ -15,7 +15,7 @@
{
identify_boot_cpu();
#if !defined(CONFIG_SMP)
- printk("CPU: ");
+ printk(KERN_INFO "CPU: ");
print_cpu_info(&boot_cpu_data);
#endif
alternative_instructions();
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 5ce60a8..2055fc2 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -18,8 +18,8 @@
#include <asm/hypervisor.h>
#include <asm/processor.h>
#include <asm/sections.h>
-#include <asm/topology.h>
-#include <asm/cpumask.h>
+#include <linux/topology.h>
+#include <linux/cpumask.h>
#include <asm/pgtable.h>
#include <asm/atomic.h>
#include <asm/proto.h>
@@ -28,13 +28,13 @@
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/mtrr.h>
-#include <asm/numa.h>
+#include <linux/numa.h>
#include <asm/asm.h>
#include <asm/cpu.h>
#include <asm/mce.h>
#include <asm/msr.h>
#include <asm/pat.h>
-#include <asm/smp.h>
+#include <linux/smp.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/uv/uv.h>
@@ -94,45 +94,45 @@
* TLS descriptors are currently at a different place compared to i386.
* Hopefully nobody expects them at a fixed place (Wine?)
*/
- [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
- [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
- [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
- [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
- [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
- [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+ [GDT_ENTRY_KERNEL32_CS] = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
+ [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
+ [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
+ [GDT_ENTRY_DEFAULT_USER32_CS] = GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
+ [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
+ [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
#else
- [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
- [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
- [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
- [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } },
+ [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
+ [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+ [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
+ [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
/*
* Segments used for calling PnP BIOS have byte granularity.
* They code segments and data segments have fixed 64k limits,
* the transfer segment sizes are set at run time.
*/
/* 32-bit code */
- [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } },
+ [GDT_ENTRY_PNPBIOS_CS32] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
/* 16-bit code */
- [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } },
+ [GDT_ENTRY_PNPBIOS_CS16] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
/* 16-bit data */
- [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } },
+ [GDT_ENTRY_PNPBIOS_DS] = GDT_ENTRY_INIT(0x0092, 0, 0xffff),
/* 16-bit data */
- [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } },
+ [GDT_ENTRY_PNPBIOS_TS1] = GDT_ENTRY_INIT(0x0092, 0, 0),
/* 16-bit data */
- [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } },
+ [GDT_ENTRY_PNPBIOS_TS2] = GDT_ENTRY_INIT(0x0092, 0, 0),
/*
* The APM segments have byte granularity and their bases
* are set at run time. All have 64k limits.
*/
/* 32-bit code */
- [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } },
+ [GDT_ENTRY_APMBIOS_BASE] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
/* 16-bit code */
- [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } },
+ [GDT_ENTRY_APMBIOS_BASE+1] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
/* data */
- [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } },
+ [GDT_ENTRY_APMBIOS_BASE+2] = GDT_ENTRY_INIT(0x4092, 0, 0xffff),
- [GDT_ENTRY_ESPFIX_SS] = { { { 0x0000ffff, 0x00cf9200 } } },
- [GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } },
+ [GDT_ENTRY_ESPFIX_SS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+ [GDT_ENTRY_PERCPU] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
GDT_STACK_CANARY_INIT
#endif
} };
@@ -982,18 +982,26 @@
__setup("clearcpuid=", setup_disablecpuid);
#ifdef CONFIG_X86_64
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
DEFINE_PER_CPU_FIRST(union irq_stack_union,
irq_stack_union) __aligned(PAGE_SIZE);
-DEFINE_PER_CPU(char *, irq_stack_ptr) =
- init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+/*
+ * The following four percpu variables are hot. Align current_task to
+ * cacheline size such that all four fall in the same cacheline.
+ */
+DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
+ &init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
DEFINE_PER_CPU(unsigned long, kernel_stack) =
(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
EXPORT_PER_CPU_SYMBOL(kernel_stack);
+DEFINE_PER_CPU(char *, irq_stack_ptr) =
+ init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+
DEFINE_PER_CPU(unsigned int, irq_count) = -1;
/*
@@ -1008,8 +1016,7 @@
};
static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
- [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ])
- __aligned(PAGE_SIZE);
+ [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
/* May not be marked __init: used by software suspend */
void syscall_init(void)
@@ -1042,8 +1049,11 @@
#else /* CONFIG_X86_64 */
+DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
+
#ifdef CONFIG_CC_STACKPROTECTOR
-DEFINE_PER_CPU(unsigned long, stack_canary);
+DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
#endif
/* Make sure %fs and %gs are initialized properly in idle threads */
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 593171e..19807b8 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -3,10 +3,10 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/dma.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/processor-cyrix.h>
#include <asm/processor-flags.h>
-#include <asm/timer.h>
+#include <linux/timer.h>
#include <asm/pci-direct.h>
#include <asm/tsc.h>
@@ -282,7 +282,8 @@
* The 5510/5520 companion chips have a funky PIT.
*/
if (vendor == PCI_VENDOR_ID_CYRIX &&
- (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
+ (device == PCI_DEVICE_ID_CYRIX_5510 ||
+ device == PCI_DEVICE_ID_CYRIX_5520))
mark_tsc_unstable("cyrix 5510/5520 detected");
}
#endif
@@ -299,7 +300,8 @@
* ? : 0x7x
* GX1 : 0x8x GX1 datasheet 56
*/
- if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
+ if ((0x30 <= dir1 && dir1 <= 0x6f) ||
+ (0x80 <= dir1 && dir1 <= 0x8f))
geode_configure();
return;
} else { /* MediaGX */
@@ -427,9 +429,12 @@
printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
- setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); /* enable cpuid */
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ /* enable MAPEN */
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+ /* enable cpuid */
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+ /* disable MAPEN */
+ setCx86(CX86_CCR3, ccr3);
local_irq_restore(flags);
}
}
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index fb5b86a..93ba8ee 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -28,11 +28,10 @@
static inline void __cpuinit
detect_hypervisor_vendor(struct cpuinfo_x86 *c)
{
- if (vmware_platform()) {
+ if (vmware_platform())
c->x86_hyper_vendor = X86_HYPER_VENDOR_VMWARE;
- } else {
+ else
c->x86_hyper_vendor = X86_HYPER_VENDOR_NONE;
- }
}
unsigned long get_hypervisor_tsc_freq(void)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 3260ab0..80a722a 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -7,17 +7,17 @@
#include <linux/sched.h>
#include <linux/thread_info.h>
#include <linux/module.h>
+#include <linux/uaccess.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/msr.h>
-#include <asm/uaccess.h>
#include <asm/ds.h>
#include <asm/bugs.h>
#include <asm/cpu.h>
#ifdef CONFIG_X86_64
-#include <asm/topology.h>
+#include <linux/topology.h>
#include <asm/numa_64.h>
#endif
@@ -174,7 +174,8 @@
#ifdef CONFIG_X86_F00F_BUG
/*
* All current models of Pentium and Pentium with MMX technology CPUs
- * have the F0 0F bug, which lets nonprivileged users lock up the system.
+ * have the F0 0F bug, which lets nonprivileged users lock up the
+ * system.
* Note that the workaround only should be initialized once...
*/
c->f00f_bug = 0;
@@ -207,7 +208,7 @@
printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
lo |= MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE;
- wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+ wrmsr(MSR_IA32_MISC_ENABLE, lo, hi);
}
}
@@ -283,7 +284,7 @@
/* Intel has a non-standard dependency on %ecx for this CPUID level. */
cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
if (eax & 0x1f)
- return ((eax >> 26) + 1);
+ return (eax >> 26) + 1;
else
return 1;
}
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 789efe2..804c40e 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -3,7 +3,7 @@
*
* Changes:
* Venkatesh Pallipadi : Adding cache identification through cpuid(4)
- * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
+ * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
* Andi Kleen / Andreas Herrmann : CPUID4 emulation on AMD.
*/
@@ -16,7 +16,7 @@
#include <linux/pci.h>
#include <asm/processor.h>
-#include <asm/smp.h>
+#include <linux/smp.h>
#include <asm/k8.h>
#define LVL_1_INST 1
@@ -25,14 +25,15 @@
#define LVL_3 4
#define LVL_TRACE 5
-struct _cache_table
-{
+struct _cache_table {
unsigned char descriptor;
char cache_type;
short size;
};
-/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+/* All the cache descriptor types we care about (no TLB or
+ trace cache entries) */
+
static const struct _cache_table __cpuinitconst cache_table[] =
{
{ 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
@@ -105,8 +106,7 @@
};
-enum _cache_type
-{
+enum _cache_type {
CACHE_TYPE_NULL = 0,
CACHE_TYPE_DATA = 1,
CACHE_TYPE_INST = 2,
@@ -170,31 +170,31 @@
Maybe later */
union l1_cache {
struct {
- unsigned line_size : 8;
- unsigned lines_per_tag : 8;
- unsigned assoc : 8;
- unsigned size_in_kb : 8;
+ unsigned line_size:8;
+ unsigned lines_per_tag:8;
+ unsigned assoc:8;
+ unsigned size_in_kb:8;
};
unsigned val;
};
union l2_cache {
struct {
- unsigned line_size : 8;
- unsigned lines_per_tag : 4;
- unsigned assoc : 4;
- unsigned size_in_kb : 16;
+ unsigned line_size:8;
+ unsigned lines_per_tag:4;
+ unsigned assoc:4;
+ unsigned size_in_kb:16;
};
unsigned val;
};
union l3_cache {
struct {
- unsigned line_size : 8;
- unsigned lines_per_tag : 4;
- unsigned assoc : 4;
- unsigned res : 2;
- unsigned size_encoded : 14;
+ unsigned line_size:8;
+ unsigned lines_per_tag:4;
+ unsigned assoc:4;
+ unsigned res:2;
+ unsigned size_encoded:14;
};
unsigned val;
};
@@ -241,7 +241,7 @@
case 0:
if (!l1->val)
return;
- assoc = l1->assoc;
+ assoc = assocs[l1->assoc];
line_size = l1->line_size;
lines_per_tag = l1->lines_per_tag;
size_in_kb = l1->size_in_kb;
@@ -249,7 +249,7 @@
case 2:
if (!l2.val)
return;
- assoc = l2.assoc;
+ assoc = assocs[l2.assoc];
line_size = l2.line_size;
lines_per_tag = l2.lines_per_tag;
/* cpu_data has errata corrections for K7 applied */
@@ -258,10 +258,14 @@
case 3:
if (!l3.val)
return;
- assoc = l3.assoc;
+ assoc = assocs[l3.assoc];
line_size = l3.line_size;
lines_per_tag = l3.lines_per_tag;
size_in_kb = l3.size_encoded * 512;
+ if (boot_cpu_has(X86_FEATURE_AMD_DCM)) {
+ size_in_kb = size_in_kb >> 1;
+ assoc = assoc >> 1;
+ }
break;
default:
return;
@@ -270,18 +274,14 @@
eax->split.is_self_initializing = 1;
eax->split.type = types[leaf];
eax->split.level = levels[leaf];
- if (leaf == 3)
- eax->split.num_threads_sharing =
- current_cpu_data.x86_max_cores - 1;
- else
- eax->split.num_threads_sharing = 0;
+ eax->split.num_threads_sharing = 0;
eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
- if (assoc == 0xf)
+ if (assoc == 0xffff)
eax->split.is_fully_associative = 1;
ebx->split.coherency_line_size = line_size - 1;
- ebx->split.ways_of_associativity = assocs[assoc] - 1;
+ ebx->split.ways_of_associativity = assoc - 1;
ebx->split.physical_line_partition = lines_per_tag - 1;
ecx->split.number_of_sets = (size_in_kb * 1024) / line_size /
(ebx->split.ways_of_associativity + 1) - 1;
@@ -350,7 +350,8 @@
unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
{
- unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+ /* Cache sizes */
+ unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0;
unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb;
@@ -377,8 +378,8 @@
retval = cpuid4_cache_lookup_regs(i, &this_leaf);
if (retval >= 0) {
- switch(this_leaf.eax.split.level) {
- case 1:
+ switch (this_leaf.eax.split.level) {
+ case 1:
if (this_leaf.eax.split.type ==
CACHE_TYPE_DATA)
new_l1d = this_leaf.size/1024;
@@ -386,19 +387,20 @@
CACHE_TYPE_INST)
new_l1i = this_leaf.size/1024;
break;
- case 2:
+ case 2:
new_l2 = this_leaf.size/1024;
num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
index_msb = get_count_order(num_threads_sharing);
l2_id = c->apicid >> index_msb;
break;
- case 3:
+ case 3:
new_l3 = this_leaf.size/1024;
num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
- index_msb = get_count_order(num_threads_sharing);
+ index_msb = get_count_order(
+ num_threads_sharing);
l3_id = c->apicid >> index_msb;
break;
- default:
+ default:
break;
}
}
@@ -421,22 +423,21 @@
/* Number of times to iterate */
n = cpuid_eax(2) & 0xFF;
- for ( i = 0 ; i < n ; i++ ) {
+ for (i = 0 ; i < n ; i++) {
cpuid(2, ®s[0], ®s[1], ®s[2], ®s[3]);
/* If bit 31 is set, this is an unknown format */
- for ( j = 0 ; j < 3 ; j++ ) {
- if (regs[j] & (1 << 31)) regs[j] = 0;
- }
+ for (j = 0 ; j < 3 ; j++)
+ if (regs[j] & (1 << 31))
+ regs[j] = 0;
/* Byte 0 is level count, not a descriptor */
- for ( j = 1 ; j < 16 ; j++ ) {
+ for (j = 1 ; j < 16 ; j++) {
unsigned char des = dp[j];
unsigned char k = 0;
/* look up this descriptor in the table */
- while (cache_table[k].descriptor != 0)
- {
+ while (cache_table[k].descriptor != 0) {
if (cache_table[k].descriptor == des) {
if (only_trace && cache_table[k].cache_type != LVL_TRACE)
break;
@@ -488,14 +489,14 @@
}
if (trace)
- printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
- else if ( l1i )
- printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+ printk(KERN_INFO "CPU: Trace cache: %dK uops", trace);
+ else if (l1i)
+ printk(KERN_INFO "CPU: L1 I cache: %dK", l1i);
if (l1d)
- printk(", L1 D cache: %dK\n", l1d);
+ printk(KERN_CONT ", L1 D cache: %dK\n", l1d);
else
- printk("\n");
+ printk(KERN_CONT "\n");
if (l2)
printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
@@ -522,6 +523,18 @@
int index_msb, i;
struct cpuinfo_x86 *c = &cpu_data(cpu);
+ if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+ struct cpuinfo_x86 *d;
+ for_each_online_cpu(i) {
+ if (!per_cpu(cpuid4_info, i))
+ continue;
+ d = &cpu_data(i);
+ this_leaf = CPUID4_INFO_IDX(i, index);
+ cpumask_copy(to_cpumask(this_leaf->shared_cpu_map),
+ d->llc_shared_map);
+ }
+ return;
+ }
this_leaf = CPUID4_INFO_IDX(cpu, index);
num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
@@ -558,8 +571,13 @@
}
}
#else
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
-static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) {}
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+}
+
+static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
+{
+}
#endif
static void __cpuinit free_cache_attributes(unsigned int cpu)
@@ -645,7 +663,7 @@
static ssize_t show_##file_name \
(struct _cpuid4_info *this_leaf, char *buf) \
{ \
- return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+ return sprintf(buf, "%lu\n", (unsigned long)this_leaf->object + val); \
}
show_one_plus(level, eax.split.level, 0);
@@ -656,7 +674,7 @@
static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
{
- return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+ return sprintf(buf, "%luK\n", this_leaf->size / 1024);
}
static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
@@ -669,7 +687,7 @@
const struct cpumask *mask;
mask = to_cpumask(this_leaf->shared_cpu_map);
- n = type?
+ n = type ?
cpulist_scnprintf(buf, len-2, mask) :
cpumask_scnprintf(buf, len-2, mask);
buf[n++] = '\n';
@@ -800,7 +818,7 @@
static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
show_cache_disable_1, store_cache_disable_1);
-static struct attribute * default_attrs[] = {
+static struct attribute *default_attrs[] = {
&type.attr,
&level.attr,
&coherency_line_size.attr,
@@ -815,7 +833,7 @@
NULL
};
-static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
{
struct _cache_attr *fattr = to_attr(attr);
struct _index_kobject *this_leaf = to_object(kobj);
@@ -828,8 +846,8 @@
return ret;
}
-static ssize_t store(struct kobject * kobj, struct attribute * attr,
- const char * buf, size_t count)
+static ssize_t store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
{
struct _cache_attr *fattr = to_attr(attr);
struct _index_kobject *this_leaf = to_object(kobj);
@@ -883,7 +901,7 @@
goto err_out;
per_cpu(index_kobject, cpu) = kzalloc(
- sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+ sizeof(struct _index_kobject) * num_cache_leaves, GFP_KERNEL);
if (unlikely(per_cpu(index_kobject, cpu) == NULL))
goto err_out;
@@ -917,7 +935,7 @@
}
for (i = 0; i < num_cache_leaves; i++) {
- this_object = INDEX_KOBJECT_PTR(cpu,i);
+ this_object = INDEX_KOBJECT_PTR(cpu, i);
this_object->cpu = cpu;
this_object->index = i;
retval = kobject_init_and_add(&(this_object->kobj),
@@ -925,9 +943,8 @@
per_cpu(cache_kobject, cpu),
"index%1lu", i);
if (unlikely(retval)) {
- for (j = 0; j < i; j++) {
- kobject_put(&(INDEX_KOBJECT_PTR(cpu,j)->kobj));
- }
+ for (j = 0; j < i; j++)
+ kobject_put(&(INDEX_KOBJECT_PTR(cpu, j)->kobj));
kobject_put(per_cpu(cache_kobject, cpu));
cpuid4_cache_sysfs_exit(cpu);
return retval;
@@ -952,7 +969,7 @@
cpumask_clear_cpu(cpu, to_cpumask(cache_dev_map));
for (i = 0; i < num_cache_leaves; i++)
- kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+ kobject_put(&(INDEX_KOBJECT_PTR(cpu, i)->kobj));
kobject_put(per_cpu(cache_kobject, cpu));
cpuid4_cache_sysfs_exit(cpu);
}
@@ -977,8 +994,7 @@
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier =
-{
+static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier = {
.notifier_call = cacheinfo_cpu_callback,
};
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 0121304..9bfe9d2 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -183,6 +183,11 @@
set_bit(0, &mce_need_notify);
}
+void __weak decode_mce(struct mce *m)
+{
+ return;
+}
+
static void print_mce(struct mce *m)
{
printk(KERN_EMERG
@@ -205,6 +210,8 @@
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
+
+ decode_mce(m);
}
static void print_mce_head(void)
@@ -215,7 +222,10 @@
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
- "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
+ "Run through mcelog --ascii to decode and contact your hardware vendor\n"
+#endif
+ );
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index ddae216..1fecba4 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -489,12 +489,14 @@
int i, err = 0;
struct threshold_bank *b = NULL;
char name[32];
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
sprintf(name, "threshold_bank%i", bank);
#ifdef CONFIG_SMP
if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */
- i = cpumask_first(cpu_core_mask(cpu));
+ i = cpumask_first(c->llc_shared_map);
/* first core not up yet */
if (cpu_data(i).cpu_core_id)
@@ -514,7 +516,7 @@
if (err)
goto out;
- cpumask_copy(b->cpus, cpu_core_mask(cpu));
+ cpumask_copy(b->cpus, c->llc_shared_map);
per_cpu(threshold_banks, cpu)[bank] = b;
goto out;
@@ -539,7 +541,7 @@
#ifndef CONFIG_SMP
cpumask_setall(b->cpus);
#else
- cpumask_copy(b->cpus, cpu_core_mask(cpu));
+ cpumask_copy(b->cpus, c->llc_shared_map);
#endif
per_cpu(threshold_banks, cpu)[bank] = b;
diff --git a/arch/x86/kernel/cpu/mtrr/amd.c b/arch/x86/kernel/cpu/mtrr/amd.c
index ee2331b..33af141 100644
--- a/arch/x86/kernel/cpu/mtrr/amd.c
+++ b/arch/x86/kernel/cpu/mtrr/amd.c
@@ -7,15 +7,15 @@
static void
amd_get_mtrr(unsigned int reg, unsigned long *base,
- unsigned long *size, mtrr_type * type)
+ unsigned long *size, mtrr_type *type)
{
unsigned long low, high;
rdmsr(MSR_K6_UWCCR, low, high);
- /* Upper dword is region 1, lower is region 0 */
+ /* Upper dword is region 1, lower is region 0 */
if (reg == 1)
low = high;
- /* The base masks off on the right alignment */
+ /* The base masks off on the right alignment */
*base = (low & 0xFFFE0000) >> PAGE_SHIFT;
*type = 0;
if (low & 1)
@@ -27,74 +27,81 @@
return;
}
/*
- * This needs a little explaining. The size is stored as an
- * inverted mask of bits of 128K granularity 15 bits long offset
- * 2 bits
+ * This needs a little explaining. The size is stored as an
+ * inverted mask of bits of 128K granularity 15 bits long offset
+ * 2 bits.
*
- * So to get a size we do invert the mask and add 1 to the lowest
- * mask bit (4 as its 2 bits in). This gives us a size we then shift
- * to turn into 128K blocks
+ * So to get a size we do invert the mask and add 1 to the lowest
+ * mask bit (4 as its 2 bits in). This gives us a size we then shift
+ * to turn into 128K blocks.
*
- * eg 111 1111 1111 1100 is 512K
+ * eg 111 1111 1111 1100 is 512K
*
- * invert 000 0000 0000 0011
- * +1 000 0000 0000 0100
- * *128K ...
+ * invert 000 0000 0000 0011
+ * +1 000 0000 0000 0100
+ * *128K ...
*/
low = (~low) & 0x1FFFC;
*size = (low + 4) << (15 - PAGE_SHIFT);
- return;
}
-static void amd_set_mtrr(unsigned int reg, unsigned long base,
- unsigned long size, mtrr_type type)
-/* [SUMMARY] Set variable MTRR register on the local CPU.
- <reg> The register to set.
- <base> The base address of the region.
- <size> The size of the region. If this is 0 the region is disabled.
- <type> The type of the region.
- [RETURNS] Nothing.
-*/
+/**
+ * amd_set_mtrr - Set variable MTRR register on the local CPU.
+ *
+ * @reg The register to set.
+ * @base The base address of the region.
+ * @size The size of the region. If this is 0 the region is disabled.
+ * @type The type of the region.
+ *
+ * Returns nothing.
+ */
+static void
+amd_set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
{
u32 regs[2];
/*
- * Low is MTRR0 , High MTRR 1
+ * Low is MTRR0, High MTRR 1
*/
rdmsr(MSR_K6_UWCCR, regs[0], regs[1]);
/*
- * Blank to disable
+ * Blank to disable
*/
- if (size == 0)
+ if (size == 0) {
regs[reg] = 0;
- else
- /* Set the register to the base, the type (off by one) and an
- inverted bitmask of the size The size is the only odd
- bit. We are fed say 512K We invert this and we get 111 1111
- 1111 1011 but if you subtract one and invert you get the
- desired 111 1111 1111 1100 mask
-
- But ~(x - 1) == ~x + 1 == -x. Two's complement rocks! */
+ } else {
+ /*
+ * Set the register to the base, the type (off by one) and an
+ * inverted bitmask of the size The size is the only odd
+ * bit. We are fed say 512K We invert this and we get 111 1111
+ * 1111 1011 but if you subtract one and invert you get the
+ * desired 111 1111 1111 1100 mask
+ *
+ * But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!
+ */
regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC)
| (base << PAGE_SHIFT) | (type + 1);
+ }
/*
- * The writeback rule is quite specific. See the manual. Its
- * disable local interrupts, write back the cache, set the mtrr
+ * The writeback rule is quite specific. See the manual. Its
+ * disable local interrupts, write back the cache, set the mtrr
*/
wbinvd();
wrmsr(MSR_K6_UWCCR, regs[0], regs[1]);
}
-static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+static int
+amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
{
- /* Apply the K6 block alignment and size rules
- In order
- o Uncached or gathering only
- o 128K or bigger block
- o Power of 2 block
- o base suitably aligned to the power
- */
+ /*
+ * Apply the K6 block alignment and size rules
+ * In order
+ * o Uncached or gathering only
+ * o 128K or bigger block
+ * o Power of 2 block
+ * o base suitably aligned to the power
+ */
if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT))
|| (size & ~(size - 1)) - size || (base & (size - 1)))
return -EINVAL;
@@ -115,5 +122,3 @@
set_mtrr_ops(&amd_mtrr_ops);
return 0;
}
-
-//arch_initcall(amd_mtrr_init);
diff --git a/arch/x86/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c
index cb9aa3a..de89f14 100644
--- a/arch/x86/kernel/cpu/mtrr/centaur.c
+++ b/arch/x86/kernel/cpu/mtrr/centaur.c
@@ -1,7 +1,9 @@
#include <linux/init.h>
#include <linux/mm.h>
+
#include <asm/mtrr.h>
#include <asm/msr.h>
+
#include "mtrr.h"
static struct {
@@ -12,25 +14,25 @@
static u8 centaur_mcr_reserved;
static u8 centaur_mcr_type; /* 0 for winchip, 1 for winchip2 */
-/*
- * Report boot time MCR setups
+/**
+ * centaur_get_free_region - Get a free MTRR.
+ *
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ *
+ * Returns: the index of the region on success, else -1 on error.
*/
-
static int
centaur_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/* [SUMMARY] Get a free MTRR.
- <base> The starting (base) address of the region.
- <size> The size (in bytes) of the region.
- [RETURNS] The index of the region on success, else -1 on error.
-*/
{
- int i, max;
- mtrr_type ltype;
unsigned long lbase, lsize;
+ mtrr_type ltype;
+ int i, max;
max = num_var_ranges;
if (replace_reg >= 0 && replace_reg < max)
return replace_reg;
+
for (i = 0; i < max; ++i) {
if (centaur_mcr_reserved & (1 << i))
continue;
@@ -38,11 +40,14 @@
if (lsize == 0)
return i;
}
+
return -ENOSPC;
}
-void
-mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+/*
+ * Report boot time MCR setups
+ */
+void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
{
centaur_mcr[mcr].low = lo;
centaur_mcr[mcr].high = hi;
@@ -54,33 +59,35 @@
{
*base = centaur_mcr[reg].high >> PAGE_SHIFT;
*size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT;
- *type = MTRR_TYPE_WRCOMB; /* If it is there, it is write-combining */
+ *type = MTRR_TYPE_WRCOMB; /* write-combining */
+
if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2))
*type = MTRR_TYPE_UNCACHABLE;
if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25)
*type = MTRR_TYPE_WRBACK;
if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31)
*type = MTRR_TYPE_WRBACK;
-
}
-static void centaur_set_mcr(unsigned int reg, unsigned long base,
- unsigned long size, mtrr_type type)
+static void
+centaur_set_mcr(unsigned int reg, unsigned long base,
+ unsigned long size, mtrr_type type)
{
unsigned long low, high;
if (size == 0) {
- /* Disable */
+ /* Disable */
high = low = 0;
} else {
high = base << PAGE_SHIFT;
- if (centaur_mcr_type == 0)
- low = -size << PAGE_SHIFT | 0x1f; /* only support write-combining... */
- else {
+ if (centaur_mcr_type == 0) {
+ /* Only support write-combining... */
+ low = -size << PAGE_SHIFT | 0x1f;
+ } else {
if (type == MTRR_TYPE_UNCACHABLE)
- low = -size << PAGE_SHIFT | 0x02; /* NC */
+ low = -size << PAGE_SHIFT | 0x02; /* NC */
else
- low = -size << PAGE_SHIFT | 0x09; /* WWO,WC */
+ low = -size << PAGE_SHIFT | 0x09; /* WWO, WC */
}
}
centaur_mcr[reg].high = high;
@@ -88,118 +95,16 @@
wrmsr(MSR_IDT_MCR0 + reg, low, high);
}
-#if 0
-/*
- * Initialise the later (saner) Winchip MCR variant. In this version
- * the BIOS can pass us the registers it has used (but not their values)
- * and the control register is read/write
- */
-
-static void __init
-centaur_mcr1_init(void)
-{
- unsigned i;
- u32 lo, hi;
-
- /* Unfortunately, MCR's are read-only, so there is no way to
- * find out what the bios might have done.
- */
-
- rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- if (((lo >> 17) & 7) == 1) { /* Type 1 Winchip2 MCR */
- lo &= ~0x1C0; /* clear key */
- lo |= 0x040; /* set key to 1 */
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi); /* unlock MCR */
- }
-
- centaur_mcr_type = 1;
-
- /*
- * Clear any unconfigured MCR's.
- */
-
- for (i = 0; i < 8; ++i) {
- if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) {
- if (!(lo & (1 << (9 + i))))
- wrmsr(MSR_IDT_MCR0 + i, 0, 0);
- else
- /*
- * If the BIOS set up an MCR we cannot see it
- * but we don't wish to obliterate it
- */
- centaur_mcr_reserved |= (1 << i);
- }
- }
- /*
- * Throw the main write-combining switch...
- * However if OOSTORE is enabled then people have already done far
- * cleverer things and we should behave.
- */
-
- lo |= 15; /* Write combine enables */
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-}
-
-/*
- * Initialise the original winchip with read only MCR registers
- * no used bitmask for the BIOS to pass on and write only control
- */
-
-static void __init
-centaur_mcr0_init(void)
-{
- unsigned i;
-
- /* Unfortunately, MCR's are read-only, so there is no way to
- * find out what the bios might have done.
- */
-
- /* Clear any unconfigured MCR's.
- * This way we are sure that the centaur_mcr array contains the actual
- * values. The disadvantage is that any BIOS tweaks are thus undone.
- *
- */
- for (i = 0; i < 8; ++i) {
- if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0)
- wrmsr(MSR_IDT_MCR0 + i, 0, 0);
- }
-
- wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); /* Write only */
-}
-
-/*
- * Initialise Winchip series MCR registers
- */
-
-static void __init
-centaur_mcr_init(void)
-{
- struct set_mtrr_context ctxt;
-
- set_mtrr_prepare_save(&ctxt);
- set_mtrr_cache_disable(&ctxt);
-
- if (boot_cpu_data.x86_model == 4)
- centaur_mcr0_init();
- else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9)
- centaur_mcr1_init();
-
- set_mtrr_done(&ctxt);
-}
-#endif
-
-static int centaur_validate_add_page(unsigned long base,
- unsigned long size, unsigned int type)
+static int
+centaur_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
{
/*
- * FIXME: Winchip2 supports uncached
+ * FIXME: Winchip2 supports uncached
*/
- if (type != MTRR_TYPE_WRCOMB &&
+ if (type != MTRR_TYPE_WRCOMB &&
(centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
- printk(KERN_WARNING
- "mtrr: only write-combining%s supported\n",
- centaur_mcr_type ? " and uncacheable are"
- : " is");
+ pr_warning("mtrr: only write-combining%s supported\n",
+ centaur_mcr_type ? " and uncacheable are" : " is");
return -EINVAL;
}
return 0;
@@ -207,7 +112,6 @@
static struct mtrr_ops centaur_mtrr_ops = {
.vendor = X86_VENDOR_CENTAUR,
-// .init = centaur_mcr_init,
.set = centaur_set_mcr,
.get = centaur_get_mcr,
.get_free_region = centaur_get_free_region,
@@ -220,5 +124,3 @@
set_mtrr_ops(¢aur_mtrr_ops);
return 0;
}
-
-//arch_initcall(centaur_init_mtrr);
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 1d584a1..315738c 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -1,51 +1,75 @@
-/* MTRR (Memory Type Range Register) cleanup
-
- Copyright (C) 2009 Yinghai Lu
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with this library; if not, write to the Free
- Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
+/*
+ * MTRR (Memory Type Range Register) cleanup
+ *
+ * Copyright (C) 2009 Yinghai Lu
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/smp.h>
#include <linux/cpu.h>
-#include <linux/mutex.h>
#include <linux/sort.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/kvm_para.h>
+#include <asm/processor.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/kvm_para.h>
+
#include "mtrr.h"
-/* should be related to MTRR_VAR_RANGES nums */
-#define RANGE_NUM 256
-
struct res_range {
- unsigned long start;
- unsigned long end;
+ unsigned long start;
+ unsigned long end;
};
+struct var_mtrr_range_state {
+ unsigned long base_pfn;
+ unsigned long size_pfn;
+ mtrr_type type;
+};
+
+struct var_mtrr_state {
+ unsigned long range_startk;
+ unsigned long range_sizek;
+ unsigned long chunk_sizek;
+ unsigned long gran_sizek;
+ unsigned int reg;
+};
+
+/* Should be related to MTRR_VAR_RANGES nums */
+#define RANGE_NUM 256
+
+static struct res_range __initdata range[RANGE_NUM];
+static int __initdata nr_range;
+
+static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+
+static int __initdata debug_print;
+#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
+
+
static int __init
-add_range(struct res_range *range, int nr_range, unsigned long start,
- unsigned long end)
+add_range(struct res_range *range, int nr_range,
+ unsigned long start, unsigned long end)
{
- /* out of slots */
+ /* Out of slots: */
if (nr_range >= RANGE_NUM)
return nr_range;
@@ -58,12 +82,12 @@
}
static int __init
-add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
- unsigned long end)
+add_range_with_merge(struct res_range *range, int nr_range,
+ unsigned long start, unsigned long end)
{
int i;
- /* try to merge it with old one */
+ /* Try to merge it with old one: */
for (i = 0; i < nr_range; i++) {
unsigned long final_start, final_end;
unsigned long common_start, common_end;
@@ -84,7 +108,7 @@
return nr_range;
}
- /* need to add that */
+ /* Need to add it: */
return add_range(range, nr_range, start, end);
}
@@ -117,7 +141,7 @@
}
if (start > range[j].start && end < range[j].end) {
- /* find the new spare */
+ /* Find the new spare: */
for (i = 0; i < RANGE_NUM; i++) {
if (range[i].end == 0)
break;
@@ -146,14 +170,8 @@
return start1 - start2;
}
-struct var_mtrr_range_state {
- unsigned long base_pfn;
- unsigned long size_pfn;
- mtrr_type type;
-};
-
-static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
-static int __initdata debug_print;
+#define BIOS_BUG_MSG KERN_WARNING \
+ "WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
static int __init
x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
@@ -180,7 +198,7 @@
range[i].start, range[i].end + 1);
}
- /* take out UC ranges */
+ /* Take out UC ranges: */
for (i = 0; i < num_var_ranges; i++) {
type = range_state[i].type;
if (type != MTRR_TYPE_UNCACHABLE &&
@@ -193,9 +211,7 @@
if (base < (1<<(20-PAGE_SHIFT)) && mtrr_state.have_fixed &&
(mtrr_state.enabled & 1)) {
/* Var MTRR contains UC entry below 1M? Skip it: */
- printk(KERN_WARNING "WARNING: BIOS bug: VAR MTRR %d "
- "contains strange UC entry under 1M, check "
- "with your system vendor!\n", i);
+ printk(BIOS_BUG_MSG, i);
if (base + size <= (1<<(20-PAGE_SHIFT)))
continue;
size -= (1<<(20-PAGE_SHIFT)) - base;
@@ -237,17 +253,13 @@
return nr_range;
}
-static struct res_range __initdata range[RANGE_NUM];
-static int __initdata nr_range;
-
#ifdef CONFIG_MTRR_SANITIZER
static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
{
- unsigned long sum;
+ unsigned long sum = 0;
int i;
- sum = 0;
for (i = 0; i < nr_range; i++)
sum += range[i].end + 1 - range[i].start;
@@ -278,17 +290,9 @@
}
early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup);
-struct var_mtrr_state {
- unsigned long range_startk;
- unsigned long range_sizek;
- unsigned long chunk_sizek;
- unsigned long gran_sizek;
- unsigned int reg;
-};
-
static void __init
set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
- unsigned char type, unsigned int address_bits)
+ unsigned char type, unsigned int address_bits)
{
u32 base_lo, base_hi, mask_lo, mask_hi;
u64 base, mask;
@@ -301,7 +305,7 @@
mask = (1ULL << address_bits) - 1;
mask &= ~((((u64)sizek) << 10) - 1);
- base = ((u64)basek) << 10;
+ base = ((u64)basek) << 10;
base |= type;
mask |= 0x800;
@@ -317,15 +321,14 @@
static void __init
save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
- unsigned char type)
+ unsigned char type)
{
range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10);
range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10);
range_state[reg].type = type;
}
-static void __init
-set_var_mtrr_all(unsigned int address_bits)
+static void __init set_var_mtrr_all(unsigned int address_bits)
{
unsigned long basek, sizek;
unsigned char type;
@@ -342,11 +345,11 @@
static unsigned long to_size_factor(unsigned long sizek, char *factorp)
{
- char factor;
unsigned long base = sizek;
+ char factor;
if (base & ((1<<10) - 1)) {
- /* not MB alignment */
+ /* Not MB-aligned: */
factor = 'K';
} else if (base & ((1<<20) - 1)) {
factor = 'M';
@@ -372,11 +375,12 @@
unsigned long max_align, align;
unsigned long sizek;
- /* Compute the maximum size I can make a range */
+ /* Compute the maximum size with which we can make a range: */
if (range_startk)
max_align = ffs(range_startk) - 1;
else
max_align = 32;
+
align = fls(range_sizek) - 1;
if (align > max_align)
align = max_align;
@@ -386,11 +390,10 @@
char start_factor = 'K', size_factor = 'K';
unsigned long start_base, size_base;
- start_base = to_size_factor(range_startk,
- &start_factor),
- size_base = to_size_factor(sizek, &size_factor),
+ start_base = to_size_factor(range_startk, &start_factor);
+ size_base = to_size_factor(sizek, &size_factor);
- printk(KERN_DEBUG "Setting variable MTRR %d, "
+ Dprintk("Setting variable MTRR %d, "
"base: %ld%cB, range: %ld%cB, type %s\n",
reg, start_base, start_factor,
size_base, size_factor,
@@ -425,10 +428,11 @@
chunk_sizek = state->chunk_sizek;
gran_sizek = state->gran_sizek;
- /* align with gran size, prevent small block used up MTRRs */
+ /* Align with gran size, prevent small block used up MTRRs: */
range_basek = ALIGN(state->range_startk, gran_sizek);
if ((range_basek > basek) && basek)
return second_sizek;
+
state->range_sizek -= (range_basek - state->range_startk);
range_sizek = ALIGN(state->range_sizek, gran_sizek);
@@ -439,22 +443,21 @@
}
state->range_sizek = range_sizek;
- /* try to append some small hole */
+ /* Try to append some small hole: */
range0_basek = state->range_startk;
range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
- /* no increase */
+ /* No increase: */
if (range0_sizek == state->range_sizek) {
- if (debug_print)
- printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
- range0_basek<<10,
- (range0_basek + state->range_sizek)<<10);
+ Dprintk("rangeX: %016lx - %016lx\n",
+ range0_basek<<10,
+ (range0_basek + state->range_sizek)<<10);
state->reg = range_to_mtrr(state->reg, range0_basek,
state->range_sizek, MTRR_TYPE_WRBACK);
return 0;
}
- /* only cut back, when it is not the last */
+ /* Only cut back when it is not the last: */
if (sizek) {
while (range0_basek + range0_sizek > (basek + sizek)) {
if (range0_sizek >= chunk_sizek)
@@ -470,16 +473,16 @@
second_try:
range_basek = range0_basek + range0_sizek;
- /* one hole in the middle */
+ /* One hole in the middle: */
if (range_basek > basek && range_basek <= (basek + sizek))
second_sizek = range_basek - basek;
if (range0_sizek > state->range_sizek) {
- /* one hole in middle or at end */
+ /* One hole in middle or at the end: */
hole_sizek = range0_sizek - state->range_sizek - second_sizek;
- /* hole size should be less than half of range0 size */
+ /* Hole size should be less than half of range0 size: */
if (hole_sizek >= (range0_sizek >> 1) &&
range0_sizek >= chunk_sizek) {
range0_sizek -= chunk_sizek;
@@ -491,32 +494,30 @@
}
if (range0_sizek) {
- if (debug_print)
- printk(KERN_DEBUG "range0: %016lx - %016lx\n",
- range0_basek<<10,
- (range0_basek + range0_sizek)<<10);
+ Dprintk("range0: %016lx - %016lx\n",
+ range0_basek<<10,
+ (range0_basek + range0_sizek)<<10);
state->reg = range_to_mtrr(state->reg, range0_basek,
range0_sizek, MTRR_TYPE_WRBACK);
}
if (range0_sizek < state->range_sizek) {
- /* need to handle left over */
+ /* Need to handle left over range: */
range_sizek = state->range_sizek - range0_sizek;
- if (debug_print)
- printk(KERN_DEBUG "range: %016lx - %016lx\n",
- range_basek<<10,
- (range_basek + range_sizek)<<10);
+ Dprintk("range: %016lx - %016lx\n",
+ range_basek<<10,
+ (range_basek + range_sizek)<<10);
+
state->reg = range_to_mtrr(state->reg, range_basek,
range_sizek, MTRR_TYPE_WRBACK);
}
if (hole_sizek) {
hole_basek = range_basek - hole_sizek - second_sizek;
- if (debug_print)
- printk(KERN_DEBUG "hole: %016lx - %016lx\n",
- hole_basek<<10,
- (hole_basek + hole_sizek)<<10);
+ Dprintk("hole: %016lx - %016lx\n",
+ hole_basek<<10,
+ (hole_basek + hole_sizek)<<10);
state->reg = range_to_mtrr(state->reg, hole_basek,
hole_sizek, MTRR_TYPE_UNCACHABLE);
}
@@ -537,23 +538,23 @@
basek = base_pfn << (PAGE_SHIFT - 10);
sizek = size_pfn << (PAGE_SHIFT - 10);
- /* See if I can merge with the last range */
+ /* See if I can merge with the last range: */
if ((basek <= 1024) ||
(state->range_startk + state->range_sizek == basek)) {
unsigned long endk = basek + sizek;
state->range_sizek = endk - state->range_startk;
return;
}
- /* Write the range mtrrs */
+ /* Write the range mtrrs: */
if (state->range_sizek != 0)
second_sizek = range_to_mtrr_with_hole(state, basek, sizek);
- /* Allocate an msr */
+ /* Allocate an msr: */
state->range_startk = basek + second_sizek;
state->range_sizek = sizek - second_sizek;
}
-/* mininum size of mtrr block that can take hole */
+/* Mininum size of mtrr block that can take hole: */
static u64 mtrr_chunk_size __initdata = (256ULL<<20);
static int __init parse_mtrr_chunk_size_opt(char *p)
@@ -565,7 +566,7 @@
}
early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt);
-/* granity of mtrr of block */
+/* Granularity of mtrr of block: */
static u64 mtrr_gran_size __initdata;
static int __init parse_mtrr_gran_size_opt(char *p)
@@ -577,7 +578,7 @@
}
early_param("mtrr_gran_size", parse_mtrr_gran_size_opt);
-static int nr_mtrr_spare_reg __initdata =
+static unsigned long nr_mtrr_spare_reg __initdata =
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT;
static int __init parse_mtrr_spare_reg(char *arg)
@@ -586,7 +587,6 @@
nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0);
return 0;
}
-
early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
static int __init
@@ -594,8 +594,8 @@
u64 chunk_size, u64 gran_size)
{
struct var_mtrr_state var_state;
- int i;
int num_reg;
+ int i;
var_state.range_startk = 0;
var_state.range_sizek = 0;
@@ -605,17 +605,18 @@
memset(range_state, 0, sizeof(range_state));
- /* Write the range etc */
- for (i = 0; i < nr_range; i++)
+ /* Write the range: */
+ for (i = 0; i < nr_range; i++) {
set_var_mtrr_range(&var_state, range[i].start,
range[i].end - range[i].start + 1);
+ }
- /* Write the last range */
+ /* Write the last range: */
if (var_state.range_sizek != 0)
range_to_mtrr_with_hole(&var_state, 0, 0);
num_reg = var_state.reg;
- /* Clear out the extra MTRR's */
+ /* Clear out the extra MTRR's: */
while (var_state.reg < num_var_ranges) {
save_var_mtrr(var_state.reg, 0, 0, 0);
var_state.reg++;
@@ -625,11 +626,11 @@
}
struct mtrr_cleanup_result {
- unsigned long gran_sizek;
- unsigned long chunk_sizek;
- unsigned long lose_cover_sizek;
- unsigned int num_reg;
- int bad;
+ unsigned long gran_sizek;
+ unsigned long chunk_sizek;
+ unsigned long lose_cover_sizek;
+ unsigned int num_reg;
+ int bad;
};
/*
@@ -645,10 +646,10 @@
static void __init print_out_mtrr_range_state(void)
{
- int i;
char start_factor = 'K', size_factor = 'K';
unsigned long start_base, size_base;
mtrr_type type;
+ int i;
for (i = 0; i < num_var_ranges; i++) {
@@ -676,10 +677,10 @@
int i;
mtrr_type type;
unsigned long size;
- /* extra one for all 0 */
+ /* Extra one for all 0: */
int num[MTRR_NUM_TYPES + 1];
- /* check entries number */
+ /* Check entries number: */
memset(num, 0, sizeof(num));
for (i = 0; i < num_var_ranges; i++) {
type = range_state[i].type;
@@ -693,88 +694,86 @@
num[type]++;
}
- /* check if we got UC entries */
+ /* Check if we got UC entries: */
if (!num[MTRR_TYPE_UNCACHABLE])
return 0;
- /* check if we only had WB and UC */
+ /* Check if we only had WB and UC */
if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
- num_var_ranges - num[MTRR_NUM_TYPES])
+ num_var_ranges - num[MTRR_NUM_TYPES])
return 0;
return 1;
}
static unsigned long __initdata range_sums;
-static void __init mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
- unsigned long extra_remove_base,
- unsigned long extra_remove_size,
- int i)
+
+static void __init
+mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
+ unsigned long x_remove_base,
+ unsigned long x_remove_size, int i)
{
- int num_reg;
static struct res_range range_new[RANGE_NUM];
- static int nr_range_new;
unsigned long range_sums_new;
+ static int nr_range_new;
+ int num_reg;
- /* convert ranges to var ranges state */
- num_reg = x86_setup_var_mtrrs(range, nr_range,
- chunk_size, gran_size);
+ /* Convert ranges to var ranges state: */
+ num_reg = x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
- /* we got new setting in range_state, check it */
+ /* We got new setting in range_state, check it: */
memset(range_new, 0, sizeof(range_new));
nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
- extra_remove_base, extra_remove_size);
+ x_remove_base, x_remove_size);
range_sums_new = sum_ranges(range_new, nr_range_new);
result[i].chunk_sizek = chunk_size >> 10;
result[i].gran_sizek = gran_size >> 10;
result[i].num_reg = num_reg;
+
if (range_sums < range_sums_new) {
- result[i].lose_cover_sizek =
- (range_sums_new - range_sums) << PSHIFT;
+ result[i].lose_cover_sizek = (range_sums_new - range_sums) << PSHIFT;
result[i].bad = 1;
- } else
- result[i].lose_cover_sizek =
- (range_sums - range_sums_new) << PSHIFT;
+ } else {
+ result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT;
+ }
- /* double check it */
+ /* Double check it: */
if (!result[i].bad && !result[i].lose_cover_sizek) {
- if (nr_range_new != nr_range ||
- memcmp(range, range_new, sizeof(range)))
- result[i].bad = 1;
+ if (nr_range_new != nr_range || memcmp(range, range_new, sizeof(range)))
+ result[i].bad = 1;
}
- if (!result[i].bad && (range_sums - range_sums_new <
- min_loss_pfn[num_reg])) {
- min_loss_pfn[num_reg] =
- range_sums - range_sums_new;
- }
+ if (!result[i].bad && (range_sums - range_sums_new < min_loss_pfn[num_reg]))
+ min_loss_pfn[num_reg] = range_sums - range_sums_new;
}
static void __init mtrr_print_out_one_result(int i)
{
- char gran_factor, chunk_factor, lose_factor;
unsigned long gran_base, chunk_base, lose_base;
+ char gran_factor, chunk_factor, lose_factor;
gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
- printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
- result[i].bad ? "*BAD*" : " ",
- gran_base, gran_factor, chunk_base, chunk_factor);
- printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n",
- result[i].num_reg, result[i].bad ? "-" : "",
- lose_base, lose_factor);
+
+ pr_info("%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+ result[i].bad ? "*BAD*" : " ",
+ gran_base, gran_factor, chunk_base, chunk_factor);
+ pr_cont("num_reg: %d \tlose cover RAM: %s%ld%c\n",
+ result[i].num_reg, result[i].bad ? "-" : "",
+ lose_base, lose_factor);
}
static int __init mtrr_search_optimal_index(void)
{
- int i;
int num_reg_good;
int index_good;
+ int i;
if (nr_mtrr_spare_reg >= num_var_ranges)
nr_mtrr_spare_reg = num_var_ranges - 1;
+
num_reg_good = -1;
for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
if (!min_loss_pfn[i])
@@ -796,24 +795,24 @@
return index_good;
}
-
int __init mtrr_cleanup(unsigned address_bits)
{
- unsigned long extra_remove_base, extra_remove_size;
+ unsigned long x_remove_base, x_remove_size;
unsigned long base, size, def, dummy;
- mtrr_type type;
u64 chunk_size, gran_size;
+ mtrr_type type;
int index_good;
int i;
if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
return 0;
+
rdmsr(MSR_MTRRdefType, def, dummy);
def &= 0xff;
if (def != MTRR_TYPE_UNCACHABLE)
return 0;
- /* get it and store it aside */
+ /* Get it and store it aside: */
memset(range_state, 0, sizeof(range_state));
for (i = 0; i < num_var_ranges; i++) {
mtrr_if->get(i, &base, &size, &type);
@@ -822,29 +821,28 @@
range_state[i].type = type;
}
- /* check if we need handle it and can handle it */
+ /* Check if we need handle it and can handle it: */
if (!mtrr_need_cleanup())
return 0;
- /* print original var MTRRs at first, for debugging: */
+ /* Print original var MTRRs at first, for debugging: */
printk(KERN_DEBUG "original variable MTRRs\n");
print_out_mtrr_range_state();
memset(range, 0, sizeof(range));
- extra_remove_size = 0;
- extra_remove_base = 1 << (32 - PAGE_SHIFT);
+ x_remove_size = 0;
+ x_remove_base = 1 << (32 - PAGE_SHIFT);
if (mtrr_tom2)
- extra_remove_size =
- (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
- nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
- extra_remove_size);
+ x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base;
+
+ nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size);
/*
- * [0, 1M) should always be coverred by var mtrr with WB
- * and fixed mtrrs should take effective before var mtrr for it
+ * [0, 1M) should always be covered by var mtrr with WB
+ * and fixed mtrrs should take effect before var mtrr for it:
*/
nr_range = add_range_with_merge(range, nr_range, 0,
(1ULL<<(20 - PAGE_SHIFT)) - 1);
- /* sort the ranges */
+ /* Sort the ranges: */
sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
range_sums = sum_ranges(range, nr_range);
@@ -854,7 +852,7 @@
if (mtrr_chunk_size && mtrr_gran_size) {
i = 0;
mtrr_calc_range_state(mtrr_chunk_size, mtrr_gran_size,
- extra_remove_base, extra_remove_size, i);
+ x_remove_base, x_remove_size, i);
mtrr_print_out_one_result(i);
@@ -880,7 +878,7 @@
continue;
mtrr_calc_range_state(chunk_size, gran_size,
- extra_remove_base, extra_remove_size, i);
+ x_remove_base, x_remove_size, i);
if (debug_print) {
mtrr_print_out_one_result(i);
printk(KERN_INFO "\n");
@@ -890,7 +888,7 @@
}
}
- /* try to find the optimal index */
+ /* Try to find the optimal index: */
index_good = mtrr_search_optimal_index();
if (index_good != -1) {
@@ -898,7 +896,7 @@
i = index_good;
mtrr_print_out_one_result(i);
- /* convert ranges to var ranges state */
+ /* Convert ranges to var ranges state: */
chunk_size = result[i].chunk_sizek;
chunk_size <<= 10;
gran_size = result[i].gran_sizek;
@@ -941,8 +939,8 @@
* Note this won't check if the MTRRs < 4GB where the magic bit doesn't
* apply to are wrong, but so far we don't know of any such case in the wild.
*/
-#define Tom2Enabled (1U << 21)
-#define Tom2ForceMemTypeWB (1U << 22)
+#define Tom2Enabled (1U << 21)
+#define Tom2ForceMemTypeWB (1U << 22)
int __init amd_special_default_mtrr(void)
{
@@ -952,7 +950,7 @@
return 0;
if (boot_cpu_data.x86 < 0xf || boot_cpu_data.x86 > 0x11)
return 0;
- /* In case some hypervisor doesn't pass SYSCFG through */
+ /* In case some hypervisor doesn't pass SYSCFG through: */
if (rdmsr_safe(MSR_K8_SYSCFG, &l, &h) < 0)
return 0;
/*
@@ -965,19 +963,21 @@
return 0;
}
-static u64 __init real_trim_memory(unsigned long start_pfn,
- unsigned long limit_pfn)
+static u64 __init
+real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn)
{
u64 trim_start, trim_size;
+
trim_start = start_pfn;
trim_start <<= PAGE_SHIFT;
+
trim_size = limit_pfn;
trim_size <<= PAGE_SHIFT;
trim_size -= trim_start;
- return e820_update_range(trim_start, trim_size, E820_RAM,
- E820_RESERVED);
+ return e820_update_range(trim_start, trim_size, E820_RAM, E820_RESERVED);
}
+
/**
* mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
* @end_pfn: ending page frame number
@@ -985,7 +985,7 @@
* Some buggy BIOSes don't setup the MTRRs properly for systems with certain
* memory configurations. This routine checks that the highest MTRR matches
* the end of memory, to make sure the MTRRs having a write back type cover
- * all of the memory the kernel is intending to use. If not, it'll trim any
+ * all of the memory the kernel is intending to use. If not, it'll trim any
* memory off the end by adjusting end_pfn, removing it from the kernel's
* allocation pools, warning the user with an obnoxious message.
*/
@@ -994,21 +994,22 @@
unsigned long i, base, size, highest_pfn = 0, def, dummy;
mtrr_type type;
u64 total_trim_size;
-
/* extra one for all 0 */
int num[MTRR_NUM_TYPES + 1];
+
/*
* Make sure we only trim uncachable memory on machines that
* support the Intel MTRR architecture:
*/
if (!is_cpu(INTEL) || disable_mtrr_trim)
return 0;
+
rdmsr(MSR_MTRRdefType, def, dummy);
def &= 0xff;
if (def != MTRR_TYPE_UNCACHABLE)
return 0;
- /* get it and store it aside */
+ /* Get it and store it aside: */
memset(range_state, 0, sizeof(range_state));
for (i = 0; i < num_var_ranges; i++) {
mtrr_if->get(i, &base, &size, &type);
@@ -1017,7 +1018,7 @@
range_state[i].type = type;
}
- /* Find highest cached pfn */
+ /* Find highest cached pfn: */
for (i = 0; i < num_var_ranges; i++) {
type = range_state[i].type;
if (type != MTRR_TYPE_WRBACK)
@@ -1028,13 +1029,13 @@
highest_pfn = base + size;
}
- /* kvm/qemu doesn't have mtrr set right, don't trim them all */
+ /* kvm/qemu doesn't have mtrr set right, don't trim them all: */
if (!highest_pfn) {
printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n");
return 0;
}
- /* check entries number */
+ /* Check entries number: */
memset(num, 0, sizeof(num));
for (i = 0; i < num_var_ranges; i++) {
type = range_state[i].type;
@@ -1046,11 +1047,11 @@
num[type]++;
}
- /* no entry for WB? */
+ /* No entry for WB? */
if (!num[MTRR_TYPE_WRBACK])
return 0;
- /* check if we only had WB and UC */
+ /* Check if we only had WB and UC: */
if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
num_var_ranges - num[MTRR_NUM_TYPES])
return 0;
@@ -1066,31 +1067,31 @@
}
nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
+ /* Check the head: */
total_trim_size = 0;
- /* check the head */
if (range[0].start)
total_trim_size += real_trim_memory(0, range[0].start);
- /* check the holes */
+
+ /* Check the holes: */
for (i = 0; i < nr_range - 1; i++) {
if (range[i].end + 1 < range[i+1].start)
total_trim_size += real_trim_memory(range[i].end + 1,
range[i+1].start);
}
- /* check the top */
+
+ /* Check the top: */
i = nr_range - 1;
if (range[i].end + 1 < end_pfn)
total_trim_size += real_trim_memory(range[i].end + 1,
end_pfn);
if (total_trim_size) {
- printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover"
- " all of memory, losing %lluMB of RAM.\n",
- total_trim_size >> 20);
+ pr_warning("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n", total_trim_size >> 20);
if (!changed_by_mtrr_cleanup)
WARN_ON(1);
- printk(KERN_INFO "update e820 for mtrr\n");
+ pr_info("update e820 for mtrr\n");
update_e820();
return 1;
@@ -1098,4 +1099,3 @@
return 0;
}
-
diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index ff14c32..228d982 100644
--- a/arch/x86/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -1,38 +1,40 @@
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/mm.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-#include <asm/io.h>
+
#include <asm/processor-cyrix.h>
#include <asm/processor-flags.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
#include "mtrr.h"
static void
cyrix_get_arr(unsigned int reg, unsigned long *base,
unsigned long *size, mtrr_type * type)
{
- unsigned long flags;
unsigned char arr, ccr3, rcr, shift;
+ unsigned long flags;
arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */
- /* Save flags and disable interrupts */
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- ((unsigned char *) base)[3] = getCx86(arr);
- ((unsigned char *) base)[2] = getCx86(arr + 1);
- ((unsigned char *) base)[1] = getCx86(arr + 2);
+ ((unsigned char *)base)[3] = getCx86(arr);
+ ((unsigned char *)base)[2] = getCx86(arr + 1);
+ ((unsigned char *)base)[1] = getCx86(arr + 2);
rcr = getCx86(CX86_RCR_BASE + reg);
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
- /* Enable interrupts if it was enabled previously */
local_irq_restore(flags);
+
shift = ((unsigned char *) base)[1] & 0x0f;
*base >>= PAGE_SHIFT;
- /* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
+ /*
+ * Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
* Note: shift==0xf means 4G, this is unsupported.
*/
if (shift)
@@ -76,17 +78,20 @@
}
}
+/*
+ * cyrix_get_free_region - get a free ARR.
+ *
+ * @base: the starting (base) address of the region.
+ * @size: the size (in bytes) of the region.
+ *
+ * Returns: the index of the region on success, else -1 on error.
+*/
static int
cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/* [SUMMARY] Get a free ARR.
- <base> The starting (base) address of the region.
- <size> The size (in bytes) of the region.
- [RETURNS] The index of the region on success, else -1 on error.
-*/
{
- int i;
- mtrr_type ltype;
unsigned long lbase, lsize;
+ mtrr_type ltype;
+ int i;
switch (replace_reg) {
case 7:
@@ -107,14 +112,17 @@
cyrix_get_arr(7, &lbase, &lsize, <ype);
if (lsize == 0)
return 7;
- /* Else try ARR0-ARR6 first */
+ /* Else try ARR0-ARR6 first */
} else {
for (i = 0; i < 7; i++) {
cyrix_get_arr(i, &lbase, &lsize, <ype);
if (lsize == 0)
return i;
}
- /* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */
+ /*
+ * ARR0-ARR6 isn't free
+ * try ARR7 but its size must be at least 256K
+ */
cyrix_get_arr(i, &lbase, &lsize, <ype);
if ((lsize == 0) && (size >= 0x40))
return i;
@@ -122,21 +130,22 @@
return -ENOSPC;
}
-static u32 cr4 = 0;
-static u32 ccr3;
+static u32 cr4, ccr3;
static void prepare_set(void)
{
u32 cr0;
/* Save value of CR4 and clear Page Global Enable (bit 7) */
- if ( cpu_has_pge ) {
+ if (cpu_has_pge) {
cr4 = read_cr4();
write_cr4(cr4 & ~X86_CR4_PGE);
}
- /* Disable and flush caches. Note that wbinvd flushes the TLBs as
- a side-effect */
+ /*
+ * Disable and flush caches.
+ * Note that wbinvd flushes the TLBs as a side-effect
+ */
cr0 = read_cr0() | X86_CR0_CD;
wbinvd();
write_cr0(cr0);
@@ -147,22 +156,21 @@
/* Cyrix ARRs - everything else was excluded at the top */
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
-
}
static void post_set(void)
{
- /* Flush caches and TLBs */
+ /* Flush caches and TLBs */
wbinvd();
/* Cyrix ARRs - everything else was excluded at the top */
setCx86(CX86_CCR3, ccr3);
-
- /* Enable caches */
+
+ /* Enable caches */
write_cr0(read_cr0() & 0xbfffffff);
- /* Restore value of CR4 */
- if ( cpu_has_pge )
+ /* Restore value of CR4 */
+ if (cpu_has_pge)
write_cr4(cr4);
}
@@ -178,7 +186,8 @@
size >>= 6;
size &= 0x7fff; /* make sure arr_size <= 14 */
- for (arr_size = 0; size; arr_size++, size >>= 1) ;
+ for (arr_size = 0; size; arr_size++, size >>= 1)
+ ;
if (reg < 7) {
switch (type) {
@@ -215,18 +224,18 @@
prepare_set();
base <<= PAGE_SHIFT;
- setCx86(arr, ((unsigned char *) &base)[3]);
- setCx86(arr + 1, ((unsigned char *) &base)[2]);
- setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
+ setCx86(arr + 0, ((unsigned char *)&base)[3]);
+ setCx86(arr + 1, ((unsigned char *)&base)[2]);
+ setCx86(arr + 2, (((unsigned char *)&base)[1]) | arr_size);
setCx86(CX86_RCR_BASE + reg, arr_type);
post_set();
}
typedef struct {
- unsigned long base;
- unsigned long size;
- mtrr_type type;
+ unsigned long base;
+ unsigned long size;
+ mtrr_type type;
} arr_state_t;
static arr_state_t arr_state[8] = {
@@ -247,16 +256,17 @@
setCx86(CX86_CCR0 + i, ccr_state[i]);
for (; i < 7; i++)
setCx86(CX86_CCR4 + i, ccr_state[i]);
- for (i = 0; i < 8; i++)
- cyrix_set_arr(i, arr_state[i].base,
+
+ for (i = 0; i < 8; i++) {
+ cyrix_set_arr(i, arr_state[i].base,
arr_state[i].size, arr_state[i].type);
+ }
post_set();
}
static struct mtrr_ops cyrix_mtrr_ops = {
.vendor = X86_VENDOR_CYRIX,
-// .init = cyrix_arr_init,
.set_all = cyrix_set_all,
.set = cyrix_set_arr,
.get = cyrix_get_arr,
@@ -270,5 +280,3 @@
set_mtrr_ops(&cyrix_mtrr_ops);
return 0;
}
-
-//arch_initcall(cyrix_init_mtrr);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 0543f69..55da0c5 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -1,28 +1,34 @@
-/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
- because MTRRs can span upto 40 bits (36bits on most modern x86) */
+/*
+ * This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
+ * because MTRRs can span upto 40 bits (36bits on most modern x86)
+ */
+#define DEBUG
+
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <linux/mm.h>
-#include <linux/module.h>
-#include <asm/io.h>
+
+#include <asm/processor-flags.h>
+#include <asm/cpufeature.h>
+#include <asm/tlbflush.h>
+#include <asm/system.h>
#include <asm/mtrr.h>
#include <asm/msr.h>
-#include <asm/system.h>
-#include <asm/cpufeature.h>
-#include <asm/processor-flags.h>
-#include <asm/tlbflush.h>
#include <asm/pat.h>
+
#include "mtrr.h"
struct fixed_range_block {
- int base_msr; /* start address of an MTRR block */
- int ranges; /* number of MTRRs in this block */
+ int base_msr; /* start address of an MTRR block */
+ int ranges; /* number of MTRRs in this block */
};
static struct fixed_range_block fixed_range_blocks[] = {
- { MSR_MTRRfix64K_00000, 1 }, /* one 64k MTRR */
- { MSR_MTRRfix16K_80000, 2 }, /* two 16k MTRRs */
- { MSR_MTRRfix4K_C0000, 8 }, /* eight 4k MTRRs */
+ { MSR_MTRRfix64K_00000, 1 }, /* one 64k MTRR */
+ { MSR_MTRRfix16K_80000, 2 }, /* two 16k MTRRs */
+ { MSR_MTRRfix4K_C0000, 8 }, /* eight 4k MTRRs */
{}
};
@@ -30,10 +36,10 @@
static int mtrr_state_set;
u64 mtrr_tom2;
-struct mtrr_state_type mtrr_state = {};
+struct mtrr_state_type mtrr_state;
EXPORT_SYMBOL_GPL(mtrr_state);
-/**
+/*
* BIOS is expected to clear MtrrFixDramModEn bit, see for example
* "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
* Opteron Processors" (26094 Rev. 3.30 February 2006), section
@@ -104,9 +110,8 @@
* Look of multiple ranges matching this address and pick type
* as per MTRR precedence
*/
- if (!(mtrr_state.enabled & 2)) {
+ if (!(mtrr_state.enabled & 2))
return mtrr_state.def_type;
- }
prev_match = 0xFF;
for (i = 0; i < num_var_ranges; ++i) {
@@ -125,9 +130,8 @@
if (start_state != end_state)
return 0xFE;
- if ((start & mask) != (base & mask)) {
+ if ((start & mask) != (base & mask))
continue;
- }
curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
if (prev_match == 0xFF) {
@@ -148,9 +152,8 @@
curr_match = MTRR_TYPE_WRTHROUGH;
}
- if (prev_match != curr_match) {
+ if (prev_match != curr_match)
return MTRR_TYPE_UNCACHABLE;
- }
}
if (mtrr_tom2) {
@@ -164,7 +167,7 @@
return mtrr_state.def_type;
}
-/* Get the MSR pair relating to a var range */
+/* Get the MSR pair relating to a var range */
static void
get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
{
@@ -172,7 +175,7 @@
rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
}
-/* fill the MSR pair relating to a var range */
+/* Fill the MSR pair relating to a var range */
void fill_mtrr_var_range(unsigned int index,
u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi)
{
@@ -186,10 +189,9 @@
vr[index].mask_hi = mask_hi;
}
-static void
-get_fixed_ranges(mtrr_type * frs)
+static void get_fixed_ranges(mtrr_type *frs)
{
- unsigned int *p = (unsigned int *) frs;
+ unsigned int *p = (unsigned int *)frs;
int i;
k8_check_syscfg_dram_mod_en();
@@ -217,22 +219,22 @@
if (!last_fixed_end)
return;
- printk(KERN_DEBUG " %05X-%05X %s\n", last_fixed_start,
- last_fixed_end - 1, mtrr_attrib_to_str(last_fixed_type));
+ pr_debug(" %05X-%05X %s\n", last_fixed_start,
+ last_fixed_end - 1, mtrr_attrib_to_str(last_fixed_type));
last_fixed_end = 0;
}
static void __init update_fixed_last(unsigned base, unsigned end,
- mtrr_type type)
+ mtrr_type type)
{
last_fixed_start = base;
last_fixed_end = end;
last_fixed_type = type;
}
-static void __init print_fixed(unsigned base, unsigned step,
- const mtrr_type *types)
+static void __init
+print_fixed(unsigned base, unsigned step, const mtrr_type *types)
{
unsigned i;
@@ -259,54 +261,55 @@
unsigned int i;
int high_width;
- printk(KERN_DEBUG "MTRR default type: %s\n",
- mtrr_attrib_to_str(mtrr_state.def_type));
+ pr_debug("MTRR default type: %s\n",
+ mtrr_attrib_to_str(mtrr_state.def_type));
if (mtrr_state.have_fixed) {
- printk(KERN_DEBUG "MTRR fixed ranges %sabled:\n",
- mtrr_state.enabled & 1 ? "en" : "dis");
+ pr_debug("MTRR fixed ranges %sabled:\n",
+ mtrr_state.enabled & 1 ? "en" : "dis");
print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0);
for (i = 0; i < 2; ++i)
- print_fixed(0x80000 + i * 0x20000, 0x04000, mtrr_state.fixed_ranges + (i + 1) * 8);
+ print_fixed(0x80000 + i * 0x20000, 0x04000,
+ mtrr_state.fixed_ranges + (i + 1) * 8);
for (i = 0; i < 8; ++i)
- print_fixed(0xC0000 + i * 0x08000, 0x01000, mtrr_state.fixed_ranges + (i + 3) * 8);
+ print_fixed(0xC0000 + i * 0x08000, 0x01000,
+ mtrr_state.fixed_ranges + (i + 3) * 8);
/* tail */
print_fixed_last();
}
- printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
- mtrr_state.enabled & 2 ? "en" : "dis");
+ pr_debug("MTRR variable ranges %sabled:\n",
+ mtrr_state.enabled & 2 ? "en" : "dis");
if (size_or_mask & 0xffffffffUL)
high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
else
high_width = ffs(size_or_mask>>32) + 32 - 1;
high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
+
for (i = 0; i < num_var_ranges; ++i) {
if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
- printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n",
- i,
- high_width,
- mtrr_state.var_ranges[i].base_hi,
- mtrr_state.var_ranges[i].base_lo >> 12,
- high_width,
- mtrr_state.var_ranges[i].mask_hi,
- mtrr_state.var_ranges[i].mask_lo >> 12,
- mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff));
+ pr_debug(" %u base %0*X%05X000 mask %0*X%05X000 %s\n",
+ i,
+ high_width,
+ mtrr_state.var_ranges[i].base_hi,
+ mtrr_state.var_ranges[i].base_lo >> 12,
+ high_width,
+ mtrr_state.var_ranges[i].mask_hi,
+ mtrr_state.var_ranges[i].mask_lo >> 12,
+ mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff));
else
- printk(KERN_DEBUG " %u disabled\n", i);
+ pr_debug(" %u disabled\n", i);
}
- if (mtrr_tom2) {
- printk(KERN_DEBUG "TOM2: %016llx aka %lldM\n",
- mtrr_tom2, mtrr_tom2>>20);
- }
+ if (mtrr_tom2)
+ pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
}
-/* Grab all of the MTRR state for this CPU into *state */
+/* Grab all of the MTRR state for this CPU into *state */
void __init get_mtrr_state(void)
{
- unsigned int i;
struct mtrr_var_range *vrs;
- unsigned lo, dummy;
unsigned long flags;
+ unsigned lo, dummy;
+ unsigned int i;
vrs = mtrr_state.var_ranges;
@@ -324,6 +327,7 @@
if (amd_special_default_mtrr()) {
unsigned low, high;
+
/* TOP_MEM2 */
rdmsr(MSR_K8_TOP_MEM2, low, high);
mtrr_tom2 = high;
@@ -344,10 +348,9 @@
post_set();
local_irq_restore(flags);
-
}
-/* Some BIOS's are fucked and don't set all MTRRs the same! */
+/* Some BIOS's are messed up and don't set all MTRRs the same! */
void __init mtrr_state_warn(void)
{
unsigned long mask = smp_changes_mask;
@@ -355,28 +358,33 @@
if (!mask)
return;
if (mask & MTRR_CHANGE_MASK_FIXED)
- printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+ pr_warning("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
if (mask & MTRR_CHANGE_MASK_VARIABLE)
- printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n");
+ pr_warning("mtrr: your CPUs had inconsistent variable MTRR settings\n");
if (mask & MTRR_CHANGE_MASK_DEFTYPE)
- printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+ pr_warning("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+
printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
printk(KERN_INFO "mtrr: corrected configuration.\n");
}
-/* Doesn't attempt to pass an error out to MTRR users
- because it's quite complicated in some cases and probably not
- worth it because the best error handling is to ignore it. */
+/*
+ * Doesn't attempt to pass an error out to MTRR users
+ * because it's quite complicated in some cases and probably not
+ * worth it because the best error handling is to ignore it.
+ */
void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
{
- if (wrmsr_safe(msr, a, b) < 0)
+ if (wrmsr_safe(msr, a, b) < 0) {
printk(KERN_ERR
"MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
smp_processor_id(), msr, a, b);
+ }
}
/**
- * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it
+ * differs from the value it should have
* @msr: MSR address of the MTTR which should be checked and updated
* @changed: pointer which indicates whether the MTRR needed to be changed
* @msrwords: pointer to the MSR values which the MSR should have
@@ -401,20 +409,23 @@
*
* Returns: The index of the region on success, else negative on error.
*/
-int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
+int
+generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
{
- int i, max;
- mtrr_type ltype;
unsigned long lbase, lsize;
+ mtrr_type ltype;
+ int i, max;
max = num_var_ranges;
if (replace_reg >= 0 && replace_reg < max)
return replace_reg;
+
for (i = 0; i < max; ++i) {
mtrr_if->get(i, &lbase, &lsize, <ype);
if (lsize == 0)
return i;
}
+
return -ENOSPC;
}
@@ -434,7 +445,7 @@
rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
if ((mask_lo & 0x800) == 0) {
- /* Invalid (i.e. free) range */
+ /* Invalid (i.e. free) range */
*base = 0;
*size = 0;
*type = 0;
@@ -471,27 +482,31 @@
}
/**
- * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they
+ * differ from the saved set
* @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
*/
-static int set_fixed_ranges(mtrr_type * frs)
+static int set_fixed_ranges(mtrr_type *frs)
{
- unsigned long long *saved = (unsigned long long *) frs;
+ unsigned long long *saved = (unsigned long long *)frs;
bool changed = false;
- int block=-1, range;
+ int block = -1, range;
k8_check_syscfg_dram_mod_en();
- while (fixed_range_blocks[++block].ranges)
- for (range=0; range < fixed_range_blocks[block].ranges; range++)
- set_fixed_range(fixed_range_blocks[block].base_msr + range,
- &changed, (unsigned int *) saved++);
+ while (fixed_range_blocks[++block].ranges) {
+ for (range = 0; range < fixed_range_blocks[block].ranges; range++)
+ set_fixed_range(fixed_range_blocks[block].base_msr + range,
+ &changed, (unsigned int *)saved++);
+ }
return changed;
}
-/* Set the MSR pair relating to a var range. Returns TRUE if
- changes are made */
+/*
+ * Set the MSR pair relating to a var range.
+ * Returns true if changes are made.
+ */
static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
{
unsigned int lo, hi;
@@ -501,6 +516,7 @@
if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
|| (vr->base_hi & (size_and_mask >> (32 - PAGE_SHIFT))) !=
(hi & (size_and_mask >> (32 - PAGE_SHIFT)))) {
+
mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
changed = true;
}
@@ -526,21 +542,26 @@
*/
static unsigned long set_mtrr_state(void)
{
- unsigned int i;
unsigned long change_mask = 0;
+ unsigned int i;
- for (i = 0; i < num_var_ranges; i++)
+ for (i = 0; i < num_var_ranges; i++) {
if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+ }
if (mtrr_state.have_fixed && set_fixed_ranges(mtrr_state.fixed_ranges))
change_mask |= MTRR_CHANGE_MASK_FIXED;
- /* Set_mtrr_restore restores the old value of MTRRdefType,
- so to set it we fiddle with the saved value */
+ /*
+ * Set_mtrr_restore restores the old value of MTRRdefType,
+ * so to set it we fiddle with the saved value:
+ */
if ((deftype_lo & 0xff) != mtrr_state.def_type
|| ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
- deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type | (mtrr_state.enabled << 10);
+
+ deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type |
+ (mtrr_state.enabled << 10);
change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
}
@@ -548,33 +569,36 @@
}
-static unsigned long cr4 = 0;
+static unsigned long cr4;
static DEFINE_SPINLOCK(set_atomicity_lock);
/*
- * Since we are disabling the cache don't allow any interrupts - they
- * would run extremely slow and would only increase the pain. The caller must
- * ensure that local interrupts are disabled and are reenabled after post_set()
- * has been called.
+ * Since we are disabling the cache don't allow any interrupts,
+ * they would run extremely slow and would only increase the pain.
+ *
+ * The caller must ensure that local interrupts are disabled and
+ * are reenabled after post_set() has been called.
*/
-
static void prepare_set(void) __acquires(set_atomicity_lock)
{
unsigned long cr0;
- /* Note that this is not ideal, since the cache is only flushed/disabled
- for this CPU while the MTRRs are changed, but changing this requires
- more invasive changes to the way the kernel boots */
+ /*
+ * Note that this is not ideal
+ * since the cache is only flushed/disabled for this CPU while the
+ * MTRRs are changed, but changing this requires more invasive
+ * changes to the way the kernel boots
+ */
spin_lock(&set_atomicity_lock);
- /* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+ /* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
cr0 = read_cr0() | X86_CR0_CD;
write_cr0(cr0);
wbinvd();
- /* Save value of CR4 and clear Page Global Enable (bit 7) */
- if ( cpu_has_pge ) {
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ if (cpu_has_pge) {
cr4 = read_cr4();
write_cr4(cr4 & ~X86_CR4_PGE);
}
@@ -582,26 +606,26 @@
/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
__flush_tlb();
- /* Save MTRR state */
+ /* Save MTRR state */
rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
- /* Disable MTRRs, and set the default type to uncached */
+ /* Disable MTRRs, and set the default type to uncached */
mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
}
static void post_set(void) __releases(set_atomicity_lock)
{
- /* Flush TLBs (no need to flush caches - they are disabled) */
+ /* Flush TLBs (no need to flush caches - they are disabled) */
__flush_tlb();
/* Intel (P6) standard MTRRs */
mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
-
- /* Enable caches */
+
+ /* Enable caches */
write_cr0(read_cr0() & 0xbfffffff);
- /* Restore value of CR4 */
- if ( cpu_has_pge )
+ /* Restore value of CR4 */
+ if (cpu_has_pge)
write_cr4(cr4);
spin_unlock(&set_atomicity_lock);
}
@@ -623,24 +647,27 @@
post_set();
local_irq_restore(flags);
- /* Use the atomic bitops to update the global mask */
+ /* Use the atomic bitops to update the global mask */
for (count = 0; count < sizeof mask * 8; ++count) {
if (mask & 0x01)
set_bit(count, &smp_changes_mask);
mask >>= 1;
}
-
+
}
+/**
+ * generic_set_mtrr - set variable MTRR register on the local CPU.
+ *
+ * @reg: The register to set.
+ * @base: The base address of the region.
+ * @size: The size of the region. If this is 0 the region is disabled.
+ * @type: The type of the region.
+ *
+ * Returns nothing.
+ */
static void generic_set_mtrr(unsigned int reg, unsigned long base,
unsigned long size, mtrr_type type)
-/* [SUMMARY] Set variable MTRR register on the local CPU.
- <reg> The register to set.
- <base> The base address of the region.
- <size> The size of the region. If this is 0 the region is disabled.
- <type> The type of the region.
- [RETURNS] Nothing.
-*/
{
unsigned long flags;
struct mtrr_var_range *vr;
@@ -651,8 +678,10 @@
prepare_set();
if (size == 0) {
- /* The invalid bit is kept in the mask, so we simply clear the
- relevant mask register to disable a range. */
+ /*
+ * The invalid bit is kept in the mask, so we simply
+ * clear the relevant mask register to disable a range.
+ */
mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
memset(vr, 0, sizeof(struct mtrr_var_range));
} else {
@@ -669,46 +698,50 @@
local_irq_restore(flags);
}
-int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+int generic_validate_add_page(unsigned long base, unsigned long size,
+ unsigned int type)
{
unsigned long lbase, last;
- /* For Intel PPro stepping <= 7, must be 4 MiB aligned
- and not touch 0x70000000->0x7003FFFF */
+ /*
+ * For Intel PPro stepping <= 7
+ * must be 4 MiB aligned and not touch 0x70000000 -> 0x7003FFFF
+ */
if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model == 1 &&
boot_cpu_data.x86_mask <= 7) {
if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
- printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+ pr_warning("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
return -EINVAL;
}
if (!(base + size < 0x70000 || base > 0x7003F) &&
(type == MTRR_TYPE_WRCOMB
|| type == MTRR_TYPE_WRBACK)) {
- printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+ pr_warning("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
return -EINVAL;
}
}
- /* Check upper bits of base and last are equal and lower bits are 0
- for base and 1 for last */
+ /*
+ * Check upper bits of base and last are equal and lower bits are 0
+ * for base and 1 for last
+ */
last = base + size - 1;
for (lbase = base; !(lbase & 1) && (last & 1);
- lbase = lbase >> 1, last = last >> 1) ;
+ lbase = lbase >> 1, last = last >> 1)
+ ;
if (lbase != last) {
- printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n",
- base, size);
+ pr_warning("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size);
return -EINVAL;
}
return 0;
}
-
static int generic_have_wrcomb(void)
{
unsigned long config, dummy;
rdmsr(MSR_MTRRcap, config, dummy);
- return (config & (1 << 10));
+ return config & (1 << 10);
}
int positive_have_wrcomb(void)
@@ -716,14 +749,15 @@
return 1;
}
-/* generic structure...
+/*
+ * Generic structure...
*/
struct mtrr_ops generic_mtrr_ops = {
- .use_intel_if = 1,
- .set_all = generic_set_all,
- .get = generic_get_mtrr,
- .get_free_region = generic_get_free_region,
- .set = generic_set_mtrr,
- .validate_add_page = generic_validate_add_page,
- .have_wrcomb = generic_have_wrcomb,
+ .use_intel_if = 1,
+ .set_all = generic_set_all,
+ .get = generic_get_mtrr,
+ .get_free_region = generic_get_free_region,
+ .set = generic_set_mtrr,
+ .validate_add_page = generic_validate_add_page,
+ .have_wrcomb = generic_have_wrcomb,
};
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index fb73a52..08b6ea4 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -1,27 +1,28 @@
-#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <linux/capability.h>
-#include <linux/ctype.h>
-#include <linux/module.h>
#include <linux/seq_file.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
#define LINE_SIZE 80
#include <asm/mtrr.h>
+
#include "mtrr.h"
#define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private)
static const char *const mtrr_strings[MTRR_NUM_TYPES] =
{
- "uncachable", /* 0 */
- "write-combining", /* 1 */
- "?", /* 2 */
- "?", /* 3 */
- "write-through", /* 4 */
- "write-protect", /* 5 */
- "write-back", /* 6 */
+ "uncachable", /* 0 */
+ "write-combining", /* 1 */
+ "?", /* 2 */
+ "?", /* 3 */
+ "write-through", /* 4 */
+ "write-protect", /* 5 */
+ "write-back", /* 6 */
};
const char *mtrr_attrib_to_str(int x)
@@ -35,8 +36,8 @@
mtrr_file_add(unsigned long base, unsigned long size,
unsigned int type, bool increment, struct file *file, int page)
{
+ unsigned int *fcount = FILE_FCOUNT(file);
int reg, max;
- unsigned int *fcount = FILE_FCOUNT(file);
max = num_var_ranges;
if (fcount == NULL) {
@@ -61,8 +62,8 @@
mtrr_file_del(unsigned long base, unsigned long size,
struct file *file, int page)
{
- int reg;
unsigned int *fcount = FILE_FCOUNT(file);
+ int reg;
if (!page) {
if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
@@ -81,13 +82,14 @@
return reg;
}
-/* RED-PEN: seq_file can seek now. this is ignored. */
+/*
+ * seq_file can seek but we ignore it.
+ *
+ * Format of control line:
+ * "base=%Lx size=%Lx type=%s" or "disable=%d"
+ */
static ssize_t
mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
-/* Format of control line:
- "base=%Lx size=%Lx type=%s" OR:
- "disable=%d"
-*/
{
int i, err;
unsigned long reg;
@@ -100,15 +102,18 @@
return -EPERM;
if (!len)
return -EINVAL;
+
memset(line, 0, LINE_SIZE);
if (len > LINE_SIZE)
len = LINE_SIZE;
if (copy_from_user(line, buf, len - 1))
return -EFAULT;
+
linelen = strlen(line);
ptr = line + linelen - 1;
if (linelen && *ptr == '\n')
*ptr = '\0';
+
if (!strncmp(line, "disable=", 8)) {
reg = simple_strtoul(line + 8, &ptr, 0);
err = mtrr_del_page(reg, 0, 0);
@@ -116,28 +121,35 @@
return err;
return len;
}
+
if (strncmp(line, "base=", 5))
return -EINVAL;
+
base = simple_strtoull(line + 5, &ptr, 0);
- for (; isspace(*ptr); ++ptr) ;
+ for (; isspace(*ptr); ++ptr)
+ ;
+
if (strncmp(ptr, "size=", 5))
return -EINVAL;
+
size = simple_strtoull(ptr + 5, &ptr, 0);
if ((base & 0xfff) || (size & 0xfff))
return -EINVAL;
- for (; isspace(*ptr); ++ptr) ;
+ for (; isspace(*ptr); ++ptr)
+ ;
+
if (strncmp(ptr, "type=", 5))
return -EINVAL;
ptr += 5;
- for (; isspace(*ptr); ++ptr) ;
+ for (; isspace(*ptr); ++ptr)
+ ;
+
for (i = 0; i < MTRR_NUM_TYPES; ++i) {
if (strcmp(ptr, mtrr_strings[i]))
continue;
base >>= PAGE_SHIFT;
size >>= PAGE_SHIFT;
- err =
- mtrr_add_page((unsigned long) base, (unsigned long) size, i,
- true);
+ err = mtrr_add_page((unsigned long)base, (unsigned long)size, i, true);
if (err < 0)
return err;
return len;
@@ -181,7 +193,9 @@
case MTRRIOC32_SET_PAGE_ENTRY:
case MTRRIOC32_DEL_PAGE_ENTRY:
case MTRRIOC32_KILL_PAGE_ENTRY: {
- struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+ struct mtrr_sentry32 __user *s32;
+
+ s32 = (struct mtrr_sentry32 __user *)__arg;
err = get_user(sentry.base, &s32->base);
err |= get_user(sentry.size, &s32->size);
err |= get_user(sentry.type, &s32->type);
@@ -191,7 +205,9 @@
}
case MTRRIOC32_GET_ENTRY:
case MTRRIOC32_GET_PAGE_ENTRY: {
- struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+ struct mtrr_gentry32 __user *g32;
+
+ g32 = (struct mtrr_gentry32 __user *)__arg;
err = get_user(gentry.regnum, &g32->regnum);
err |= get_user(gentry.base, &g32->base);
err |= get_user(gentry.size, &g32->size);
@@ -314,7 +330,7 @@
if (err)
return err;
- switch(cmd) {
+ switch (cmd) {
case MTRRIOC_GET_ENTRY:
case MTRRIOC_GET_PAGE_ENTRY:
if (copy_to_user(arg, &gentry, sizeof gentry))
@@ -323,7 +339,9 @@
#ifdef CONFIG_COMPAT
case MTRRIOC32_GET_ENTRY:
case MTRRIOC32_GET_PAGE_ENTRY: {
- struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+ struct mtrr_gentry32 __user *g32;
+
+ g32 = (struct mtrr_gentry32 __user *)__arg;
err = put_user(gentry.base, &g32->base);
err |= put_user(gentry.size, &g32->size);
err |= put_user(gentry.regnum, &g32->regnum);
@@ -335,11 +353,10 @@
return err;
}
-static int
-mtrr_close(struct inode *ino, struct file *file)
+static int mtrr_close(struct inode *ino, struct file *file)
{
- int i, max;
unsigned int *fcount = FILE_FCOUNT(file);
+ int i, max;
if (fcount != NULL) {
max = num_var_ranges;
@@ -359,22 +376,22 @@
static int mtrr_open(struct inode *inode, struct file *file)
{
- if (!mtrr_if)
+ if (!mtrr_if)
return -EIO;
- if (!mtrr_if->get)
- return -ENXIO;
+ if (!mtrr_if->get)
+ return -ENXIO;
return single_open(file, mtrr_seq_show, NULL);
}
static const struct file_operations mtrr_fops = {
- .owner = THIS_MODULE,
- .open = mtrr_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = mtrr_write,
- .unlocked_ioctl = mtrr_ioctl,
- .compat_ioctl = mtrr_ioctl,
- .release = mtrr_close,
+ .owner = THIS_MODULE,
+ .open = mtrr_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = mtrr_write,
+ .unlocked_ioctl = mtrr_ioctl,
+ .compat_ioctl = mtrr_ioctl,
+ .release = mtrr_close,
};
static int mtrr_seq_show(struct seq_file *seq, void *offset)
@@ -388,23 +405,24 @@
max = num_var_ranges;
for (i = 0; i < max; i++) {
mtrr_if->get(i, &base, &size, &type);
- if (size == 0)
+ if (size == 0) {
mtrr_usage_table[i] = 0;
- else {
- if (size < (0x100000 >> PAGE_SHIFT)) {
- /* less than 1MB */
- factor = 'K';
- size <<= PAGE_SHIFT - 10;
- } else {
- factor = 'M';
- size >>= 20 - PAGE_SHIFT;
- }
- /* RED-PEN: base can be > 32bit */
- len += seq_printf(seq,
- "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n",
- i, base, base >> (20 - PAGE_SHIFT), size, factor,
- mtrr_usage_table[i], mtrr_attrib_to_str(type));
+ continue;
}
+ if (size < (0x100000 >> PAGE_SHIFT)) {
+ /* less than 1MB */
+ factor = 'K';
+ size <<= PAGE_SHIFT - 10;
+ } else {
+ factor = 'M';
+ size >>= 20 - PAGE_SHIFT;
+ }
+ /* Base can be > 32bit */
+ len += seq_printf(seq, "reg%02i: base=0x%06lx000 "
+ "(%5luMB), size=%5lu%cB, count=%d: %s\n",
+ i, base, base >> (20 - PAGE_SHIFT), size,
+ factor, mtrr_usage_table[i],
+ mtrr_attrib_to_str(type));
}
return 0;
}
@@ -422,6 +440,5 @@
proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_fops);
return 0;
}
-
arch_initcall(mtrr_if_init);
#endif /* CONFIG_PROC_FS */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 8fc248b..7af0f88 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -25,43 +25,48 @@
Operating System Writer's Guide" (Intel document number 242692),
section 11.11.7
- This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
- on 6-7 March 2002.
- Source: Intel Architecture Software Developers Manual, Volume 3:
+ This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
+ on 6-7 March 2002.
+ Source: Intel Architecture Software Developers Manual, Volume 3:
System Programming Guide; Section 9.11. (1997 edition - PPro).
*/
+#define DEBUG
+
+#include <linux/types.h> /* FIXME: kvm_para.h needs this */
+
+#include <linux/kvm_para.h>
+#include <linux/uaccess.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/init.h>
+#include <linux/sort.h>
+#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/sort.h>
+#include <asm/processor.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/kvm_para.h>
+
#include "mtrr.h"
-u32 num_var_ranges = 0;
+u32 num_var_ranges;
unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
static DEFINE_MUTEX(mtrr_mutex);
u64 size_or_mask, size_and_mask;
-static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
-struct mtrr_ops * mtrr_if = NULL;
+struct mtrr_ops *mtrr_if;
static void set_mtrr(unsigned int reg, unsigned long base,
unsigned long size, mtrr_type type);
-void set_mtrr_ops(struct mtrr_ops * ops)
+void set_mtrr_ops(struct mtrr_ops *ops)
{
if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
mtrr_ops[ops->vendor] = ops;
@@ -72,30 +77,36 @@
{
struct pci_dev *dev;
u8 rev;
-
- if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
- /* ServerWorks LE chipsets < rev 6 have problems with write-combining
- Don't allow it and leave room for other chipsets to be tagged */
+
+ dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL);
+ if (dev != NULL) {
+ /*
+ * ServerWorks LE chipsets < rev 6 have problems with
+ * write-combining. Don't allow it and leave room for other
+ * chipsets to be tagged
+ */
if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
if (rev <= 5) {
- printk(KERN_INFO "mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
+ pr_info("mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
pci_dev_put(dev);
return 0;
}
}
- /* Intel 450NX errata # 23. Non ascending cacheline evictions to
- write combining memory may resulting in data corruption */
+ /*
+ * Intel 450NX errata # 23. Non ascending cacheline evictions to
+ * write combining memory may resulting in data corruption
+ */
if (dev->vendor == PCI_VENDOR_ID_INTEL &&
dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
- printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+ pr_info("mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
pci_dev_put(dev);
return 0;
}
pci_dev_put(dev);
- }
- return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+ }
+ return mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0;
}
/* This function returns the number of variable MTRRs */
@@ -103,12 +114,13 @@
{
unsigned long config = 0, dummy;
- if (use_intel()) {
+ if (use_intel())
rdmsr(MSR_MTRRcap, config, dummy);
- } else if (is_cpu(AMD))
+ else if (is_cpu(AMD))
config = 2;
else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
config = 8;
+
num_var_ranges = config & 0xff;
}
@@ -130,10 +142,12 @@
mtrr_type smp_type;
};
+/**
+ * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ *
+ * Returns nothing.
+ */
static void ipi_handler(void *info)
-/* [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
- [RETURNS] Nothing.
-*/
{
#ifdef CONFIG_SMP
struct set_mtrr_data *data = info;
@@ -142,18 +156,19 @@
local_irq_save(flags);
atomic_dec(&data->count);
- while(!atomic_read(&data->gate))
+ while (!atomic_read(&data->gate))
cpu_relax();
/* The master has cleared me to execute */
- if (data->smp_reg != ~0U)
- mtrr_if->set(data->smp_reg, data->smp_base,
+ if (data->smp_reg != ~0U) {
+ mtrr_if->set(data->smp_reg, data->smp_base,
data->smp_size, data->smp_type);
- else
+ } else {
mtrr_if->set_all();
+ }
atomic_dec(&data->count);
- while(atomic_read(&data->gate))
+ while (atomic_read(&data->gate))
cpu_relax();
atomic_dec(&data->count);
@@ -161,7 +176,8 @@
#endif
}
-static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
+static inline int types_compatible(mtrr_type type1, mtrr_type type2)
+{
return type1 == MTRR_TYPE_UNCACHABLE ||
type2 == MTRR_TYPE_UNCACHABLE ||
(type1 == MTRR_TYPE_WRTHROUGH && type2 == MTRR_TYPE_WRBACK) ||
@@ -176,10 +192,10 @@
* @type: mtrr type
*
* This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
- *
+ *
* 1. Send IPI to do the following:
* 2. Disable Interrupts
- * 3. Wait for all procs to do so
+ * 3. Wait for all procs to do so
* 4. Enter no-fill cache mode
* 5. Flush caches
* 6. Clear PGE bit
@@ -189,26 +205,27 @@
* 10. Enable all range registers
* 11. Flush all TLBs and caches again
* 12. Enter normal cache mode and reenable caching
- * 13. Set PGE
+ * 13. Set PGE
* 14. Wait for buddies to catch up
* 15. Enable interrupts.
- *
+ *
* What does that mean for us? Well, first we set data.count to the number
* of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
* until it hits 0 and proceed. We set the data.gate flag and reset data.count.
- * Meanwhile, they are waiting for that flag to be set. Once it's set, each
- * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it
- * differently, so we call mtrr_if->set() callback and let them take care of it.
- * When they're done, they again decrement data->count and wait for data.gate to
- * be reset.
- * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * CPU goes through the transition of updating MTRRs.
+ * The CPU vendors may each do it differently,
+ * so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate
+ * to be reset.
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
* Everyone then enables interrupts and we all continue on.
*
* Note that the mechanism is the same for UP systems, too; all the SMP stuff
* becomes nops.
*/
-static void set_mtrr(unsigned int reg, unsigned long base,
- unsigned long size, mtrr_type type)
+static void
+set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
{
struct set_mtrr_data data;
unsigned long flags;
@@ -218,121 +235,122 @@
data.smp_size = size;
data.smp_type = type;
atomic_set(&data.count, num_booting_cpus() - 1);
- /* make sure data.count is visible before unleashing other CPUs */
- smp_wmb();
- atomic_set(&data.gate,0);
- /* Start the ball rolling on other CPUs */
+ /* Make sure data.count is visible before unleashing other CPUs */
+ smp_wmb();
+ atomic_set(&data.gate, 0);
+
+ /* Start the ball rolling on other CPUs */
if (smp_call_function(ipi_handler, &data, 0) != 0)
panic("mtrr: timed out waiting for other CPUs\n");
local_irq_save(flags);
- while(atomic_read(&data.count))
+ while (atomic_read(&data.count))
cpu_relax();
- /* ok, reset count and toggle gate */
+ /* Ok, reset count and toggle gate */
atomic_set(&data.count, num_booting_cpus() - 1);
smp_wmb();
- atomic_set(&data.gate,1);
+ atomic_set(&data.gate, 1);
- /* do our MTRR business */
+ /* Do our MTRR business */
- /* HACK!
+ /*
+ * HACK!
* We use this same function to initialize the mtrrs on boot.
* The state of the boot cpu's mtrrs has been saved, and we want
- * to replicate across all the APs.
+ * to replicate across all the APs.
* If we're doing that @reg is set to something special...
*/
- if (reg != ~0U)
- mtrr_if->set(reg,base,size,type);
+ if (reg != ~0U)
+ mtrr_if->set(reg, base, size, type);
- /* wait for the others */
- while(atomic_read(&data.count))
+ /* Wait for the others */
+ while (atomic_read(&data.count))
cpu_relax();
atomic_set(&data.count, num_booting_cpus() - 1);
smp_wmb();
- atomic_set(&data.gate,0);
+ atomic_set(&data.gate, 0);
/*
* Wait here for everyone to have seen the gate change
* So we're the last ones to touch 'data'
*/
- while(atomic_read(&data.count))
+ while (atomic_read(&data.count))
cpu_relax();
local_irq_restore(flags);
}
/**
- * mtrr_add_page - Add a memory type region
- * @base: Physical base address of region in pages (in units of 4 kB!)
- * @size: Physical size of region in pages (4 kB)
- * @type: Type of MTRR desired
- * @increment: If this is true do usage counting on the region
+ * mtrr_add_page - Add a memory type region
+ * @base: Physical base address of region in pages (in units of 4 kB!)
+ * @size: Physical size of region in pages (4 kB)
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
*
- * Memory type region registers control the caching on newer Intel and
- * non Intel processors. This function allows drivers to request an
- * MTRR is added. The details and hardware specifics of each processor's
- * implementation are hidden from the caller, but nevertheless the
- * caller should expect to need to provide a power of two size on an
- * equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
*
- * If the region cannot be added either because all regions are in use
- * or the CPU cannot support it a negative value is returned. On success
- * the register number for this entry is returned, but should be treated
- * as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
*
- * On a multiprocessor machine the changes are made to all processors.
- * This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
*
- * The available types are
+ * The available types are
*
- * %MTRR_TYPE_UNCACHABLE - No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
*
- * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
*
- * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
*
- * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
*
- * BUGS: Needs a quiet flag for the cases where drivers do not mind
- * failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
*/
-
-int mtrr_add_page(unsigned long base, unsigned long size,
+int mtrr_add_page(unsigned long base, unsigned long size,
unsigned int type, bool increment)
{
+ unsigned long lbase, lsize;
int i, replace, error;
mtrr_type ltype;
- unsigned long lbase, lsize;
if (!mtrr_if)
return -ENXIO;
-
- if ((error = mtrr_if->validate_add_page(base,size,type)))
+
+ error = mtrr_if->validate_add_page(base, size, type);
+ if (error)
return error;
if (type >= MTRR_NUM_TYPES) {
- printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+ pr_warning("mtrr: type: %u invalid\n", type);
return -EINVAL;
}
- /* If the type is WC, check that this processor supports it */
+ /* If the type is WC, check that this processor supports it */
if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
- printk(KERN_WARNING
- "mtrr: your processor doesn't support write-combining\n");
+ pr_warning("mtrr: your processor doesn't support write-combining\n");
return -ENOSYS;
}
if (!size) {
- printk(KERN_WARNING "mtrr: zero sized request\n");
+ pr_warning("mtrr: zero sized request\n");
return -EINVAL;
}
if (base & size_or_mask || size & size_or_mask) {
- printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+ pr_warning("mtrr: base or size exceeds the MTRR width\n");
return -EINVAL;
}
@@ -341,36 +359,40 @@
/* No CPU hotplug when we change MTRR entries */
get_online_cpus();
- /* Search for existing MTRR */
+
+ /* Search for existing MTRR */
mutex_lock(&mtrr_mutex);
for (i = 0; i < num_var_ranges; ++i) {
mtrr_if->get(i, &lbase, &lsize, <ype);
- if (!lsize || base > lbase + lsize - 1 || base + size - 1 < lbase)
+ if (!lsize || base > lbase + lsize - 1 ||
+ base + size - 1 < lbase)
continue;
- /* At this point we know there is some kind of overlap/enclosure */
+ /*
+ * At this point we know there is some kind of
+ * overlap/enclosure
+ */
if (base < lbase || base + size - 1 > lbase + lsize - 1) {
- if (base <= lbase && base + size - 1 >= lbase + lsize - 1) {
+ if (base <= lbase &&
+ base + size - 1 >= lbase + lsize - 1) {
/* New region encloses an existing region */
if (type == ltype) {
replace = replace == -1 ? i : -2;
continue;
- }
- else if (types_compatible(type, ltype))
+ } else if (types_compatible(type, ltype))
continue;
}
- printk(KERN_WARNING
- "mtrr: 0x%lx000,0x%lx000 overlaps existing"
- " 0x%lx000,0x%lx000\n", base, size, lbase,
- lsize);
+ pr_warning("mtrr: 0x%lx000,0x%lx000 overlaps existing"
+ " 0x%lx000,0x%lx000\n", base, size, lbase,
+ lsize);
goto out;
}
- /* New region is enclosed by an existing region */
+ /* New region is enclosed by an existing region */
if (ltype != type) {
if (types_compatible(type, ltype))
continue;
- printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
- base, size, mtrr_attrib_to_str(ltype),
- mtrr_attrib_to_str(type));
+ pr_warning("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+ base, size, mtrr_attrib_to_str(ltype),
+ mtrr_attrib_to_str(type));
goto out;
}
if (increment)
@@ -378,7 +400,7 @@
error = i;
goto out;
}
- /* Search for an empty MTRR */
+ /* Search for an empty MTRR */
i = mtrr_if->get_free_region(base, size, replace);
if (i >= 0) {
set_mtrr(i, base, size, type);
@@ -393,8 +415,9 @@
mtrr_usage_table[replace] = 0;
}
}
- } else
- printk(KERN_INFO "mtrr: no more MTRRs available\n");
+ } else {
+ pr_info("mtrr: no more MTRRs available\n");
+ }
error = i;
out:
mutex_unlock(&mtrr_mutex);
@@ -405,10 +428,8 @@
static int mtrr_check(unsigned long base, unsigned long size)
{
if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
- printk(KERN_WARNING
- "mtrr: size and base must be multiples of 4 kiB\n");
- printk(KERN_DEBUG
- "mtrr: size: 0x%lx base: 0x%lx\n", size, base);
+ pr_warning("mtrr: size and base must be multiples of 4 kiB\n");
+ pr_debug("mtrr: size: 0x%lx base: 0x%lx\n", size, base);
dump_stack();
return -1;
}
@@ -416,66 +437,64 @@
}
/**
- * mtrr_add - Add a memory type region
- * @base: Physical base address of region
- * @size: Physical size of region
- * @type: Type of MTRR desired
- * @increment: If this is true do usage counting on the region
+ * mtrr_add - Add a memory type region
+ * @base: Physical base address of region
+ * @size: Physical size of region
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
*
- * Memory type region registers control the caching on newer Intel and
- * non Intel processors. This function allows drivers to request an
- * MTRR is added. The details and hardware specifics of each processor's
- * implementation are hidden from the caller, but nevertheless the
- * caller should expect to need to provide a power of two size on an
- * equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
*
- * If the region cannot be added either because all regions are in use
- * or the CPU cannot support it a negative value is returned. On success
- * the register number for this entry is returned, but should be treated
- * as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
*
- * On a multiprocessor machine the changes are made to all processors.
- * This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
*
- * The available types are
+ * The available types are
*
- * %MTRR_TYPE_UNCACHABLE - No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
*
- * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
*
- * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
*
- * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
*
- * BUGS: Needs a quiet flag for the cases where drivers do not mind
- * failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
*/
-
-int
-mtrr_add(unsigned long base, unsigned long size, unsigned int type,
- bool increment)
+int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+ bool increment)
{
if (mtrr_check(base, size))
return -EINVAL;
return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
increment);
}
+EXPORT_SYMBOL(mtrr_add);
/**
- * mtrr_del_page - delete a memory type region
- * @reg: Register returned by mtrr_add
- * @base: Physical base address
- * @size: Size of region
+ * mtrr_del_page - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
*
- * If register is supplied then base and size are ignored. This is
- * how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
*
- * Releases an MTRR region. If the usage count drops to zero the
- * register is freed and the region returns to default state.
- * On success the register is returned, on failure a negative error
- * code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
*/
-
int mtrr_del_page(int reg, unsigned long base, unsigned long size)
{
int i, max;
@@ -500,22 +519,22 @@
}
}
if (reg < 0) {
- printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
- size);
+ pr_debug("mtrr: no MTRR for %lx000,%lx000 found\n",
+ base, size);
goto out;
}
}
if (reg >= max) {
- printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+ pr_warning("mtrr: register: %d too big\n", reg);
goto out;
}
mtrr_if->get(reg, &lbase, &lsize, <ype);
if (lsize < 1) {
- printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+ pr_warning("mtrr: MTRR %d not used\n", reg);
goto out;
}
if (mtrr_usage_table[reg] < 1) {
- printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+ pr_warning("mtrr: reg: %d has count=0\n", reg);
goto out;
}
if (--mtrr_usage_table[reg] < 1)
@@ -526,33 +545,31 @@
put_online_cpus();
return error;
}
-/**
- * mtrr_del - delete a memory type region
- * @reg: Register returned by mtrr_add
- * @base: Physical base address
- * @size: Size of region
- *
- * If register is supplied then base and size are ignored. This is
- * how drivers should call it.
- *
- * Releases an MTRR region. If the usage count drops to zero the
- * register is freed and the region returns to default state.
- * On success the register is returned, on failure a negative error
- * code.
- */
-int
-mtrr_del(int reg, unsigned long base, unsigned long size)
+/**
+ * mtrr_del - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
+ *
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
+ *
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
+ */
+int mtrr_del(int reg, unsigned long base, unsigned long size)
{
if (mtrr_check(base, size))
return -EINVAL;
return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
}
-
-EXPORT_SYMBOL(mtrr_add);
EXPORT_SYMBOL(mtrr_del);
-/* HACK ALERT!
+/*
+ * HACK ALERT!
* These should be called implicitly, but we can't yet until all the initcall
* stuff is done...
*/
@@ -576,29 +593,28 @@
static struct mtrr_value mtrr_value[MTRR_MAX_VAR_RANGES];
-static int mtrr_save(struct sys_device * sysdev, pm_message_t state)
+static int mtrr_save(struct sys_device *sysdev, pm_message_t state)
{
int i;
for (i = 0; i < num_var_ranges; i++) {
- mtrr_if->get(i,
- &mtrr_value[i].lbase,
- &mtrr_value[i].lsize,
- &mtrr_value[i].ltype);
+ mtrr_if->get(i, &mtrr_value[i].lbase,
+ &mtrr_value[i].lsize,
+ &mtrr_value[i].ltype);
}
return 0;
}
-static int mtrr_restore(struct sys_device * sysdev)
+static int mtrr_restore(struct sys_device *sysdev)
{
int i;
for (i = 0; i < num_var_ranges; i++) {
- if (mtrr_value[i].lsize)
- set_mtrr(i,
- mtrr_value[i].lbase,
- mtrr_value[i].lsize,
- mtrr_value[i].ltype);
+ if (mtrr_value[i].lsize) {
+ set_mtrr(i, mtrr_value[i].lbase,
+ mtrr_value[i].lsize,
+ mtrr_value[i].ltype);
+ }
}
return 0;
}
@@ -615,26 +631,29 @@
/**
* mtrr_bp_init - initialize mtrrs on the boot CPU
*
- * This needs to be called early; before any of the other CPUs are
+ * This needs to be called early; before any of the other CPUs are
* initialized (i.e. before smp_init()).
- *
+ *
*/
void __init mtrr_bp_init(void)
{
u32 phys_addr;
+
init_ifs();
phys_addr = 32;
if (cpu_has_mtrr) {
mtrr_if = &generic_mtrr_ops;
- size_or_mask = 0xff000000; /* 36 bits */
+ size_or_mask = 0xff000000; /* 36 bits */
size_and_mask = 0x00f00000;
phys_addr = 36;
- /* This is an AMD specific MSR, but we assume(hope?) that
- Intel will implement it to when they extend the address
- bus of the Xeon. */
+ /*
+ * This is an AMD specific MSR, but we assume(hope?) that
+ * Intel will implement it to when they extend the address
+ * bus of the Xeon.
+ */
if (cpuid_eax(0x80000000) >= 0x80000008) {
phys_addr = cpuid_eax(0x80000008) & 0xff;
/* CPUID workaround for Intel 0F33/0F34 CPU */
@@ -649,9 +668,11 @@
size_and_mask = ~size_or_mask & 0xfffff00000ULL;
} else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR &&
boot_cpu_data.x86 == 6) {
- /* VIA C* family have Intel style MTRRs, but
- don't support PAE */
- size_or_mask = 0xfff00000; /* 32 bits */
+ /*
+ * VIA C* family have Intel style MTRRs,
+ * but don't support PAE
+ */
+ size_or_mask = 0xfff00000; /* 32 bits */
size_and_mask = 0;
phys_addr = 32;
}
@@ -694,7 +715,6 @@
changed_by_mtrr_cleanup = 1;
mtrr_if->set_all();
}
-
}
}
}
@@ -706,12 +726,17 @@
if (!mtrr_if || !use_intel())
return;
/*
- * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed,
- * but this routine will be called in cpu boot time, holding the lock
- * breaks it. This routine is called in two cases: 1.very earily time
- * of software resume, when there absolutely isn't mtrr entry changes;
- * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to
- * prevent mtrr entry changes
+ * Ideally we should hold mtrr_mutex here to avoid mtrr entries
+ * changed, but this routine will be called in cpu boot time,
+ * holding the lock breaks it.
+ *
+ * This routine is called in two cases:
+ *
+ * 1. very earily time of software resume, when there absolutely
+ * isn't mtrr entry changes;
+ *
+ * 2. cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug
+ * lock to prevent mtrr entry changes
*/
local_irq_save(flags);
@@ -732,19 +757,23 @@
{
if (!mtrr_if)
return 0;
+
if (use_intel()) {
if (!changed_by_mtrr_cleanup)
mtrr_state_warn();
- } else {
- /* The CPUs haven't MTRR and seem to not support SMP. They have
- * specific drivers, we use a tricky method to support
- * suspend/resume for them.
- * TBD: is there any system with such CPU which supports
- * suspend/resume? if no, we should remove the code.
- */
- sysdev_driver_register(&cpu_sysdev_class,
- &mtrr_sysdev_driver);
+ return 0;
}
+
+ /*
+ * The CPU has no MTRR and seems to not support SMP. They have
+ * specific drivers, we use a tricky method to support
+ * suspend/resume for them.
+ *
+ * TBD: is there any system with such CPU which supports
+ * suspend/resume? If no, we should remove the code.
+ */
+ sysdev_driver_register(&cpu_sysdev_class, &mtrr_sysdev_driver);
+
return 0;
}
subsys_initcall(mtrr_init_finialize);
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 7538b76..a501dee 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -1,5 +1,5 @@
/*
- * local mtrr defines.
+ * local MTRR defines.
*/
#include <linux/types.h>
@@ -14,13 +14,12 @@
struct mtrr_ops {
u32 vendor;
u32 use_intel_if;
-// void (*init)(void);
void (*set)(unsigned int reg, unsigned long base,
unsigned long size, mtrr_type type);
void (*set_all)(void);
void (*get)(unsigned int reg, unsigned long *base,
- unsigned long *size, mtrr_type * type);
+ unsigned long *size, mtrr_type *type);
int (*get_free_region)(unsigned long base, unsigned long size,
int replace_reg);
int (*validate_add_page)(unsigned long base, unsigned long size,
@@ -39,11 +38,11 @@
/* library functions for processor-specific routines */
struct set_mtrr_context {
- unsigned long flags;
- unsigned long cr4val;
- u32 deftype_lo;
- u32 deftype_hi;
- u32 ccr3;
+ unsigned long flags;
+ unsigned long cr4val;
+ u32 deftype_lo;
+ u32 deftype_hi;
+ u32 ccr3;
};
void set_mtrr_done(struct set_mtrr_context *ctxt);
@@ -54,10 +53,10 @@
u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
void get_mtrr_state(void);
-extern void set_mtrr_ops(struct mtrr_ops * ops);
+extern void set_mtrr_ops(struct mtrr_ops *ops);
extern u64 size_or_mask, size_and_mask;
-extern struct mtrr_ops * mtrr_if;
+extern struct mtrr_ops *mtrr_if;
#define is_cpu(vnd) (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
#define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1)
diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
index 1f5fb15..dfc80b4 100644
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -1,24 +1,25 @@
-#include <linux/mm.h>
#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
#include <asm/processor-cyrix.h>
#include <asm/processor-flags.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
#include "mtrr.h"
-
-/* Put the processor into a state where MTRRs can be safely set */
+/* Put the processor into a state where MTRRs can be safely set */
void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
{
unsigned int cr0;
- /* Disable interrupts locally */
+ /* Disable interrupts locally */
local_irq_save(ctxt->flags);
if (use_intel() || is_cpu(CYRIX)) {
- /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
if (cpu_has_pge) {
ctxt->cr4val = read_cr4();
write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
@@ -33,50 +34,61 @@
write_cr0(cr0);
wbinvd();
- if (use_intel())
- /* Save MTRR state */
+ if (use_intel()) {
+ /* Save MTRR state */
rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
- else
- /* Cyrix ARRs - everything else were excluded at the top */
+ } else {
+ /*
+ * Cyrix ARRs -
+ * everything else were excluded at the top
+ */
ctxt->ccr3 = getCx86(CX86_CCR3);
+ }
}
}
void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
{
- if (use_intel())
- /* Disable MTRRs, and set the default type to uncached */
+ if (use_intel()) {
+ /* Disable MTRRs, and set the default type to uncached */
mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL,
ctxt->deftype_hi);
- else if (is_cpu(CYRIX))
- /* Cyrix ARRs - everything else were excluded at the top */
- setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+ } else {
+ if (is_cpu(CYRIX)) {
+ /* Cyrix ARRs - everything else were excluded at the top */
+ setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+ }
+ }
}
-/* Restore the processor after a set_mtrr_prepare */
+/* Restore the processor after a set_mtrr_prepare */
void set_mtrr_done(struct set_mtrr_context *ctxt)
{
if (use_intel() || is_cpu(CYRIX)) {
- /* Flush caches and TLBs */
+ /* Flush caches and TLBs */
wbinvd();
- /* Restore MTRRdefType */
- if (use_intel())
+ /* Restore MTRRdefType */
+ if (use_intel()) {
/* Intel (P6) standard MTRRs */
- mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
- else
- /* Cyrix ARRs - everything else was excluded at the top */
+ mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo,
+ ctxt->deftype_hi);
+ } else {
+ /*
+ * Cyrix ARRs -
+ * everything else was excluded at the top
+ */
setCx86(CX86_CCR3, ctxt->ccr3);
+ }
- /* Enable caches */
+ /* Enable caches */
write_cr0(read_cr0() & 0xbfffffff);
- /* Restore value of CR4 */
+ /* Restore value of CR4 */
if (cpu_has_pge)
write_cr4(ctxt->cr4val);
}
- /* Re-enable interrupts locally (if enabled previously) */
+ /* Re-enable interrupts locally (if enabled previously) */
local_irq_restore(ctxt->flags);
}
-
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 900332b..f9cd084 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -6,6 +6,7 @@
* Copyright (C) 2009 Jaswinder Singh Rajput
* Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
* Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
*
* For licencing details see kernel-base/COPYING
*/
@@ -20,6 +21,7 @@
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <linux/highmem.h>
+#include <linux/cpu.h>
#include <asm/apic.h>
#include <asm/stacktrace.h>
@@ -27,12 +29,52 @@
static u64 perf_counter_mask __read_mostly;
+/* The maximal number of PEBS counters: */
+#define MAX_PEBS_COUNTERS 4
+
+/* The size of a BTS record in bytes: */
+#define BTS_RECORD_SIZE 24
+
+/* The size of a per-cpu BTS buffer in bytes: */
+#define BTS_BUFFER_SIZE (BTS_RECORD_SIZE * 1024)
+
+/* The BTS overflow threshold in bytes from the end of the buffer: */
+#define BTS_OVFL_TH (BTS_RECORD_SIZE * 64)
+
+
+/*
+ * Bits in the debugctlmsr controlling branch tracing.
+ */
+#define X86_DEBUGCTL_TR (1 << 6)
+#define X86_DEBUGCTL_BTS (1 << 7)
+#define X86_DEBUGCTL_BTINT (1 << 8)
+#define X86_DEBUGCTL_BTS_OFF_OS (1 << 9)
+#define X86_DEBUGCTL_BTS_OFF_USR (1 << 10)
+
+/*
+ * A debug store configuration.
+ *
+ * We only support architectures that use 64bit fields.
+ */
+struct debug_store {
+ u64 bts_buffer_base;
+ u64 bts_index;
+ u64 bts_absolute_maximum;
+ u64 bts_interrupt_threshold;
+ u64 pebs_buffer_base;
+ u64 pebs_index;
+ u64 pebs_absolute_maximum;
+ u64 pebs_interrupt_threshold;
+ u64 pebs_counter_reset[MAX_PEBS_COUNTERS];
+};
+
struct cpu_hw_counters {
struct perf_counter *counters[X86_PMC_IDX_MAX];
unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
unsigned long active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
unsigned long interrupts;
int enabled;
+ struct debug_store *ds;
};
/*
@@ -58,6 +100,8 @@
int apic;
u64 max_period;
u64 intel_ctrl;
+ void (*enable_bts)(u64 config);
+ void (*disable_bts)(void);
};
static struct x86_pmu x86_pmu __read_mostly;
@@ -577,6 +621,9 @@
u64 prev_raw_count, new_raw_count;
s64 delta;
+ if (idx == X86_PMC_IDX_FIXED_BTS)
+ return 0;
+
/*
* Careful: an NMI might modify the previous counter value.
*
@@ -666,10 +713,110 @@
#endif
}
+static inline bool bts_available(void)
+{
+ return x86_pmu.enable_bts != NULL;
+}
+
+static inline void init_debug_store_on_cpu(int cpu)
+{
+ struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
+
+ if (!ds)
+ return;
+
+ wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
+ (u32)((u64)(unsigned long)ds),
+ (u32)((u64)(unsigned long)ds >> 32));
+}
+
+static inline void fini_debug_store_on_cpu(int cpu)
+{
+ if (!per_cpu(cpu_hw_counters, cpu).ds)
+ return;
+
+ wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
+}
+
+static void release_bts_hardware(void)
+{
+ int cpu;
+
+ if (!bts_available())
+ return;
+
+ get_online_cpus();
+
+ for_each_online_cpu(cpu)
+ fini_debug_store_on_cpu(cpu);
+
+ for_each_possible_cpu(cpu) {
+ struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
+
+ if (!ds)
+ continue;
+
+ per_cpu(cpu_hw_counters, cpu).ds = NULL;
+
+ kfree((void *)(unsigned long)ds->bts_buffer_base);
+ kfree(ds);
+ }
+
+ put_online_cpus();
+}
+
+static int reserve_bts_hardware(void)
+{
+ int cpu, err = 0;
+
+ if (!bts_available())
+ return 0;
+
+ get_online_cpus();
+
+ for_each_possible_cpu(cpu) {
+ struct debug_store *ds;
+ void *buffer;
+
+ err = -ENOMEM;
+ buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
+ if (unlikely(!buffer))
+ break;
+
+ ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+ if (unlikely(!ds)) {
+ kfree(buffer);
+ break;
+ }
+
+ ds->bts_buffer_base = (u64)(unsigned long)buffer;
+ ds->bts_index = ds->bts_buffer_base;
+ ds->bts_absolute_maximum =
+ ds->bts_buffer_base + BTS_BUFFER_SIZE;
+ ds->bts_interrupt_threshold =
+ ds->bts_absolute_maximum - BTS_OVFL_TH;
+
+ per_cpu(cpu_hw_counters, cpu).ds = ds;
+ err = 0;
+ }
+
+ if (err)
+ release_bts_hardware();
+ else {
+ for_each_online_cpu(cpu)
+ init_debug_store_on_cpu(cpu);
+ }
+
+ put_online_cpus();
+
+ return err;
+}
+
static void hw_perf_counter_destroy(struct perf_counter *counter)
{
if (atomic_dec_and_mutex_lock(&active_counters, &pmc_reserve_mutex)) {
release_pmc_hardware();
+ release_bts_hardware();
mutex_unlock(&pmc_reserve_mutex);
}
}
@@ -712,6 +859,42 @@
return 0;
}
+static void intel_pmu_enable_bts(u64 config)
+{
+ unsigned long debugctlmsr;
+
+ debugctlmsr = get_debugctlmsr();
+
+ debugctlmsr |= X86_DEBUGCTL_TR;
+ debugctlmsr |= X86_DEBUGCTL_BTS;
+ debugctlmsr |= X86_DEBUGCTL_BTINT;
+
+ if (!(config & ARCH_PERFMON_EVENTSEL_OS))
+ debugctlmsr |= X86_DEBUGCTL_BTS_OFF_OS;
+
+ if (!(config & ARCH_PERFMON_EVENTSEL_USR))
+ debugctlmsr |= X86_DEBUGCTL_BTS_OFF_USR;
+
+ update_debugctlmsr(debugctlmsr);
+}
+
+static void intel_pmu_disable_bts(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ unsigned long debugctlmsr;
+
+ if (!cpuc->ds)
+ return;
+
+ debugctlmsr = get_debugctlmsr();
+
+ debugctlmsr &=
+ ~(X86_DEBUGCTL_TR | X86_DEBUGCTL_BTS | X86_DEBUGCTL_BTINT |
+ X86_DEBUGCTL_BTS_OFF_OS | X86_DEBUGCTL_BTS_OFF_USR);
+
+ update_debugctlmsr(debugctlmsr);
+}
+
/*
* Setup the hardware configuration for a given attr_type
*/
@@ -728,9 +911,13 @@
err = 0;
if (!atomic_inc_not_zero(&active_counters)) {
mutex_lock(&pmc_reserve_mutex);
- if (atomic_read(&active_counters) == 0 && !reserve_pmc_hardware())
- err = -EBUSY;
- else
+ if (atomic_read(&active_counters) == 0) {
+ if (!reserve_pmc_hardware())
+ err = -EBUSY;
+ else
+ err = reserve_bts_hardware();
+ }
+ if (!err)
atomic_inc(&active_counters);
mutex_unlock(&pmc_reserve_mutex);
}
@@ -793,6 +980,20 @@
if (config == -1LL)
return -EINVAL;
+ /*
+ * Branch tracing:
+ */
+ if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
+ (hwc->sample_period == 1)) {
+ /* BTS is not supported by this architecture. */
+ if (!bts_available())
+ return -EOPNOTSUPP;
+
+ /* BTS is currently only allowed for user-mode. */
+ if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+ return -EOPNOTSUPP;
+ }
+
hwc->config |= config;
return 0;
@@ -817,7 +1018,18 @@
static void intel_pmu_disable_all(void)
{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+ barrier();
+
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+
+ if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+ intel_pmu_disable_bts();
}
static void amd_pmu_disable_all(void)
@@ -875,7 +1087,25 @@
static void intel_pmu_enable_all(void)
{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+ if (cpuc->enabled)
+ return;
+
+ cpuc->enabled = 1;
+ barrier();
+
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+
+ if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
+ struct perf_counter *counter =
+ cpuc->counters[X86_PMC_IDX_FIXED_BTS];
+
+ if (WARN_ON_ONCE(!counter))
+ return;
+
+ intel_pmu_enable_bts(counter->hw.config);
+ }
}
static void amd_pmu_enable_all(void)
@@ -962,6 +1192,11 @@
static inline void
intel_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
{
+ if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+ intel_pmu_disable_bts();
+ return;
+ }
+
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
intel_pmu_disable_fixed(hwc, idx);
return;
@@ -990,6 +1225,9 @@
s64 period = hwc->sample_period;
int err, ret = 0;
+ if (idx == X86_PMC_IDX_FIXED_BTS)
+ return 0;
+
/*
* If we are way outside a reasoable range then just skip forward:
*/
@@ -1072,6 +1310,14 @@
static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
+ if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+ if (!__get_cpu_var(cpu_hw_counters).enabled)
+ return;
+
+ intel_pmu_enable_bts(hwc->config);
+ return;
+ }
+
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
intel_pmu_enable_fixed(hwc, idx);
return;
@@ -1093,11 +1339,16 @@
{
unsigned int event;
+ event = hwc->config & ARCH_PERFMON_EVENT_MASK;
+
+ if (unlikely((event ==
+ x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
+ (hwc->sample_period == 1)))
+ return X86_PMC_IDX_FIXED_BTS;
+
if (!x86_pmu.num_counters_fixed)
return -1;
- event = hwc->config & ARCH_PERFMON_EVENT_MASK;
-
if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
return X86_PMC_IDX_FIXED_INSTRUCTIONS;
if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
@@ -1118,7 +1369,15 @@
int idx;
idx = fixed_mode_idx(counter, hwc);
- if (idx >= 0) {
+ if (idx == X86_PMC_IDX_FIXED_BTS) {
+ /* BTS is already occupied. */
+ if (test_and_set_bit(idx, cpuc->used_mask))
+ return -EAGAIN;
+
+ hwc->config_base = 0;
+ hwc->counter_base = 0;
+ hwc->idx = idx;
+ } else if (idx >= 0) {
/*
* Try to get the fixed counter, if that is already taken
* then try to get a generic counter:
@@ -1229,6 +1488,44 @@
local_irq_restore(flags);
}
+static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
+ struct perf_sample_data *data)
+{
+ struct debug_store *ds = cpuc->ds;
+ struct bts_record {
+ u64 from;
+ u64 to;
+ u64 flags;
+ };
+ struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
+ unsigned long orig_ip = data->regs->ip;
+ struct bts_record *at, *top;
+
+ if (!counter)
+ return;
+
+ if (!ds)
+ return;
+
+ at = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
+ top = (struct bts_record *)(unsigned long)ds->bts_index;
+
+ ds->bts_index = ds->bts_buffer_base;
+
+ for (; at < top; at++) {
+ data->regs->ip = at->from;
+ data->addr = at->to;
+
+ perf_counter_output(counter, 1, data);
+ }
+
+ data->regs->ip = orig_ip;
+ data->addr = 0;
+
+ /* There's new data available. */
+ counter->pending_kill = POLL_IN;
+}
+
static void x86_pmu_disable(struct perf_counter *counter)
{
struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1253,6 +1550,15 @@
* that we are disabling:
*/
x86_perf_counter_update(counter, hwc, idx);
+
+ /* Drain the remaining BTS records. */
+ if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+ struct perf_sample_data data;
+ struct pt_regs regs;
+
+ data.regs = ®s;
+ intel_pmu_drain_bts_buffer(cpuc, &data);
+ }
cpuc->counters[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
@@ -1280,6 +1586,7 @@
static void intel_pmu_reset(void)
{
+ struct debug_store *ds = __get_cpu_var(cpu_hw_counters).ds;
unsigned long flags;
int idx;
@@ -1297,6 +1604,8 @@
for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
}
+ if (ds)
+ ds->bts_index = ds->bts_buffer_base;
local_irq_restore(flags);
}
@@ -1362,6 +1671,7 @@
cpuc = &__get_cpu_var(cpu_hw_counters);
perf_disable();
+ intel_pmu_drain_bts_buffer(cpuc, &data);
status = intel_pmu_get_status();
if (!status) {
perf_enable();
@@ -1571,6 +1881,8 @@
* the generic counter period:
*/
.max_period = (1ULL << 31) - 1,
+ .enable_bts = intel_pmu_enable_bts,
+ .disable_bts = intel_pmu_disable_bts,
};
static struct x86_pmu amd_pmu = {
@@ -1962,3 +2274,8 @@
return entry;
}
+
+void hw_perf_counter_setup_online(int cpu)
+{
+ init_debug_store_on_cpu(cpu);
+}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index e60ed74..392bea4 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -68,16 +68,16 @@
/* returns the bit offset of the performance counter register */
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
- return (msr - MSR_K7_PERFCTR0);
+ return msr - MSR_K7_PERFCTR0;
case X86_VENDOR_INTEL:
if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
- return (msr - MSR_ARCH_PERFMON_PERFCTR0);
+ return msr - MSR_ARCH_PERFMON_PERFCTR0;
switch (boot_cpu_data.x86) {
case 6:
- return (msr - MSR_P6_PERFCTR0);
+ return msr - MSR_P6_PERFCTR0;
case 15:
- return (msr - MSR_P4_BPU_PERFCTR0);
+ return msr - MSR_P4_BPU_PERFCTR0;
}
}
return 0;
@@ -92,16 +92,16 @@
/* returns the bit offset of the event selection register */
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
- return (msr - MSR_K7_EVNTSEL0);
+ return msr - MSR_K7_EVNTSEL0;
case X86_VENDOR_INTEL:
if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
- return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
+ return msr - MSR_ARCH_PERFMON_EVENTSEL0;
switch (boot_cpu_data.x86) {
case 6:
- return (msr - MSR_P6_EVNTSEL0);
+ return msr - MSR_P6_EVNTSEL0;
case 15:
- return (msr - MSR_P4_BSU_ESCR0);
+ return msr - MSR_P4_BSU_ESCR0;
}
}
return 0;
@@ -113,7 +113,7 @@
{
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- return (!test_bit(counter, perfctr_nmi_owner));
+ return !test_bit(counter, perfctr_nmi_owner);
}
/* checks the an msr for availability */
@@ -124,7 +124,7 @@
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
- return (!test_bit(counter, perfctr_nmi_owner));
+ return !test_bit(counter, perfctr_nmi_owner);
}
EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
@@ -237,7 +237,7 @@
*/
counter_val = (u64)cpu_khz * 1000;
do_div(counter_val, retval);
- if (counter_val > 0x7fffffffULL) {
+ if (counter_val > 0x7fffffffULL) {
u64 count = (u64)cpu_khz * 1000;
do_div(count, 0x7fffffffUL);
retval = count + 1;
@@ -251,7 +251,7 @@
u64 count = (u64)cpu_khz * 1000;
do_div(count, nmi_hz);
- if(descr)
+ if (descr)
pr_debug("setting %s to -0x%08Lx\n", descr, count);
wrmsrl(perfctr_msr, 0 - count);
}
@@ -262,7 +262,7 @@
u64 count = (u64)cpu_khz * 1000;
do_div(count, nmi_hz);
- if(descr)
+ if (descr)
pr_debug("setting %s to -0x%08Lx\n", descr, count);
wrmsr(perfctr_msr, (u32)(-count), 0);
}
@@ -296,7 +296,7 @@
/* setup the timer */
wrmsr(evntsel_msr, evntsel, 0);
- write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz);
+ write_watchdog_counter(perfctr_msr, "K7_PERFCTR0", nmi_hz);
/* initialize the wd struct before enabling */
wd->perfctr_msr = perfctr_msr;
@@ -387,7 +387,7 @@
/* setup the timer */
wrmsr(evntsel_msr, evntsel, 0);
nmi_hz = adjust_for_32bit_ctr(nmi_hz);
- write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz);
+ write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0", nmi_hz);
/* initialize the wd struct before enabling */
wd->perfctr_msr = perfctr_msr;
@@ -415,7 +415,7 @@
apic_write(APIC_LVTPC, APIC_DM_NMI);
/* P6/ARCH_PERFMON has 32 bit counter write */
- write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz);
+ write_watchdog_counter32(wd->perfctr_msr, NULL, nmi_hz);
}
static const struct wd_ops p6_wd_ops = {
@@ -490,9 +490,9 @@
if (smp_num_siblings == 2) {
unsigned int ebx, apicid;
- ebx = cpuid_ebx(1);
- apicid = (ebx >> 24) & 0xff;
- ht_num = apicid & 1;
+ ebx = cpuid_ebx(1);
+ apicid = (ebx >> 24) & 0xff;
+ ht_num = apicid & 1;
} else
#endif
ht_num = 0;
@@ -544,7 +544,7 @@
}
evntsel = P4_ESCR_EVENT_SELECT(0x3F)
- | P4_ESCR_OS
+ | P4_ESCR_OS
| P4_ESCR_USR;
cccr_val |= P4_CCCR_THRESHOLD(15)
@@ -612,7 +612,7 @@
{
unsigned dummy;
/*
- * P4 quirks:
+ * P4 quirks:
* - An overflown perfctr will assert its interrupt
* until the OVF flag in its CCCR is cleared.
* - LVTPC is masked on interrupt and must be
@@ -662,7 +662,8 @@
* NOTE: Corresponding bit = 0 in ebx indicates event present.
*/
cpuid(10, &(eax.full), &ebx, &unused, &unused);
- if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+ if ((eax.split.mask_length <
+ (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
return 0;
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index d5e3039..62ac8cb 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -116,11 +116,9 @@
seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
#endif
seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
-#ifdef CONFIG_X86_64
seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
c->x86_phys_bits, c->x86_virt_bits);
-#endif
seq_printf(m, "power management:");
for (i = 0; i < 32; i++) {
@@ -128,7 +126,7 @@
if (i < ARRAY_SIZE(x86_power_flags) &&
x86_power_flags[i])
seq_printf(m, "%s%s",
- x86_power_flags[i][0]?" ":"",
+ x86_power_flags[i][0] ? " " : "",
x86_power_flags[i]);
else
seq_printf(m, " [%d]", i);
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 284c399..bc24f51 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -49,17 +49,17 @@
static unsigned long __vmware_get_tsc_khz(void)
{
- uint64_t tsc_hz;
- uint32_t eax, ebx, ecx, edx;
+ uint64_t tsc_hz;
+ uint32_t eax, ebx, ecx, edx;
- VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
+ VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
- if (ebx == UINT_MAX)
- return 0;
- tsc_hz = eax | (((uint64_t)ebx) << 32);
- do_div(tsc_hz, 1000);
- BUG_ON(tsc_hz >> 32);
- return tsc_hz;
+ if (ebx == UINT_MAX)
+ return 0;
+ tsc_hz = eax | (((uint64_t)ebx) << 32);
+ do_div(tsc_hz, 1000);
+ BUG_ON(tsc_hz >> 32);
+ return tsc_hz;
}
/*
diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index b4f14c6..37250fe 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -27,9 +27,7 @@
if (ptr_ok(gdt)) {
gdt += GDT_ENTRY_TSS << 3;
- tss = *(u16 *)(gdt+2);
- tss += *(u8 *)(gdt+4) << 16;
- tss += *(u8 *)(gdt+7) << 24;
+ tss = get_desc_base((struct desc_struct *)gdt);
printk(KERN_EMERG "double fault, tss at %08lx\n", tss);
if (ptr_ok(tss)) {
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 48bfe13..ef42a03 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -509,15 +509,15 @@
bts_escape = ((unsigned long)-1 & ~bts_qual_mask)
};
-static inline unsigned long bts_get(const char *base, enum bts_field field)
+static inline unsigned long bts_get(const char *base, unsigned long field)
{
base += (ds_cfg.sizeof_ptr_field * field);
return *(unsigned long *)base;
}
-static inline void bts_set(char *base, enum bts_field field, unsigned long val)
+static inline void bts_set(char *base, unsigned long field, unsigned long val)
{
- base += (ds_cfg.sizeof_ptr_field * field);;
+ base += (ds_cfg.sizeof_ptr_field * field);
(*(unsigned long *)base) = val;
}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c8405718..2d8a371 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -15,7 +15,6 @@
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/sysfs.h>
-#include <linux/ftrace.h>
#include <asm/stacktrace.h>
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 5cb5725..147005a 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -115,7 +115,7 @@
{
int x = e820x->nr_map;
- if (x == ARRAY_SIZE(e820x->map)) {
+ if (x >= ARRAY_SIZE(e820x->map)) {
printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
return;
}
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index d94e1ea..9dbb527 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -417,10 +417,6 @@
unsigned long return_hooker = (unsigned long)
&return_to_handler;
- /* Nmi's are currently unsupported */
- if (unlikely(in_nmi()))
- return;
-
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
return;
@@ -498,37 +494,56 @@
struct syscall_metadata *syscall_nr_to_meta(int nr)
{
- if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
+ if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
return NULL;
return syscalls_metadata[nr];
}
-void arch_init_ftrace_syscalls(void)
+int syscall_name_to_nr(char *name)
+{
+ int i;
+
+ if (!syscalls_metadata)
+ return -1;
+
+ for (i = 0; i < NR_syscalls; i++) {
+ if (syscalls_metadata[i]) {
+ if (!strcmp(syscalls_metadata[i]->name, name))
+ return i;
+ }
+ }
+ return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+ syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+ syscalls_metadata[num]->exit_id = id;
+}
+
+static int __init arch_init_ftrace_syscalls(void)
{
int i;
struct syscall_metadata *meta;
unsigned long **psys_syscall_table = &sys_call_table;
- static atomic_t refs;
-
- if (atomic_inc_return(&refs) != 1)
- goto end;
syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
- FTRACE_SYSCALL_MAX, GFP_KERNEL);
+ NR_syscalls, GFP_KERNEL);
if (!syscalls_metadata) {
WARN_ON(1);
- return;
+ return -ENOMEM;
}
- for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+ for (i = 0; i < NR_syscalls; i++) {
meta = find_syscall_meta(psys_syscall_table[i]);
syscalls_metadata[i] = meta;
}
- return;
-
- /* Paranoid: avoid overflow */
-end:
- atomic_dec(&refs);
+ return 0;
}
+arch_initcall(arch_init_ftrace_syscalls);
#endif
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 0d98a01..7ffec6b 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -261,9 +261,7 @@
* which will be freed later
*/
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
#ifdef CONFIG_SMP
ENTRY(startup_32_smp)
@@ -441,7 +439,6 @@
jne 1f
movl $per_cpu__gdt_page,%eax
movl $per_cpu__stack_canary,%ecx
- subl $20, %ecx
movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
shrl $16, %ecx
movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
@@ -602,11 +599,7 @@
#endif
iret
-#ifndef CONFIG_HOTPLUG_CPU
- __CPUINITDATA
-#else
__REFDATA
-#endif
.align 4
ENTRY(initial_code)
.long i386_start_kernel
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 3b09634..7d35d0f 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -218,7 +218,6 @@
void fixup_irqs(void)
{
unsigned int irq;
- static int warned;
struct irq_desc *desc;
for_each_irq_desc(irq, desc) {
@@ -236,8 +235,8 @@
}
if (desc->chip->set_affinity)
desc->chip->set_affinity(irq, affinity);
- else if (desc->action && !(warned++))
- printk("Cannot set affinity for irq %i\n", irq);
+ else if (desc->action)
+ printk_once("Cannot set affinity for irq %i\n", irq);
}
#if 0
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index c664d51..63b0ec8 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -34,7 +34,6 @@
struct kvm_para_state {
u8 mmu_queue[MMU_QUEUE_SIZE];
int mmu_queue_len;
- enum paravirt_lazy_mode mode;
};
static DEFINE_PER_CPU(struct kvm_para_state, para_state);
@@ -77,7 +76,7 @@
{
struct kvm_para_state *state = kvm_para_state();
- if (state->mode != PARAVIRT_LAZY_MMU) {
+ if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) {
kvm_mmu_op(buffer, len);
return;
}
@@ -185,10 +184,7 @@
static void kvm_enter_lazy_mmu(void)
{
- struct kvm_para_state *state = kvm_para_state();
-
paravirt_enter_lazy_mmu();
- state->mode = paravirt_get_lazy_mode();
}
static void kvm_leave_lazy_mmu(void)
@@ -197,7 +193,6 @@
mmu_queue_flush(state);
paravirt_leave_lazy_mmu();
- state->mode = paravirt_get_lazy_mode();
}
static void __init paravirt_ops_setup(void)
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 223af43..e5efcdc 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -50,8 +50,8 @@
struct timespec ts;
int low, high;
- low = (int)__pa(&wall_clock);
- high = ((u64)__pa(&wall_clock) >> 32);
+ low = (int)__pa_symbol(&wall_clock);
+ high = ((u64)__pa_symbol(&wall_clock) >> 32);
native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
vcpu_time = &get_cpu_var(hv_clock);
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 651c93b..fcd513b 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -482,11 +482,11 @@
MP_bus_info(&bus);
}
- ioapic.type = MP_IOAPIC;
- ioapic.apicid = 2;
- ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- ioapic.flags = MPC_APIC_USABLE;
- ioapic.apicaddr = 0xFEC00000;
+ ioapic.type = MP_IOAPIC;
+ ioapic.apicid = 2;
+ ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.flags = MPC_APIC_USABLE;
+ ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
MP_ioapic_info(&ioapic);
/*
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 98fd6cd..7dd9500 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -1,6 +1,7 @@
/* ----------------------------------------------------------------------- *
*
* Copyright 2000-2008 H. Peter Anvin - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author: H. Peter Anvin
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -80,11 +81,8 @@
for (; count; count -= 8) {
err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
- if (err) {
- if (err == -EFAULT) /* Fix idiotic error code */
- err = -EIO;
+ if (err)
break;
- }
if (copy_to_user(tmp, &data, 8)) {
err = -EFAULT;
break;
@@ -115,11 +113,8 @@
break;
}
err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
- if (err) {
- if (err == -EFAULT) /* Fix idiotic error code */
- err = -EIO;
+ if (err)
break;
- }
tmp += 2;
bytes += 8;
}
@@ -127,6 +122,54 @@
return bytes ? bytes : err;
}
+static long msr_ioctl(struct file *file, unsigned int ioc, unsigned long arg)
+{
+ u32 __user *uregs = (u32 __user *)arg;
+ u32 regs[8];
+ int cpu = iminor(file->f_path.dentry->d_inode);
+ int err;
+
+ switch (ioc) {
+ case X86_IOC_RDMSR_REGS:
+ if (!(file->f_mode & FMODE_READ)) {
+ err = -EBADF;
+ break;
+ }
+ if (copy_from_user(®s, uregs, sizeof regs)) {
+ err = -EFAULT;
+ break;
+ }
+ err = rdmsr_safe_regs_on_cpu(cpu, regs);
+ if (err)
+ break;
+ if (copy_to_user(uregs, ®s, sizeof regs))
+ err = -EFAULT;
+ break;
+
+ case X86_IOC_WRMSR_REGS:
+ if (!(file->f_mode & FMODE_WRITE)) {
+ err = -EBADF;
+ break;
+ }
+ if (copy_from_user(®s, uregs, sizeof regs)) {
+ err = -EFAULT;
+ break;
+ }
+ err = wrmsr_safe_regs_on_cpu(cpu, regs);
+ if (err)
+ break;
+ if (copy_to_user(uregs, ®s, sizeof regs))
+ err = -EFAULT;
+ break;
+
+ default:
+ err = -ENOTTY;
+ break;
+ }
+
+ return err;
+}
+
static int msr_open(struct inode *inode, struct file *file)
{
unsigned int cpu = iminor(file->f_path.dentry->d_inode);
@@ -157,6 +200,8 @@
.read = msr_read,
.write = msr_write,
.open = msr_open,
+ .unlocked_ioctl = msr_ioctl,
+ .compat_ioctl = msr_ioctl,
};
static int __cpuinit msr_device_create(int cpu)
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 70ec9b9..f5b0b4a 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -362,8 +362,9 @@
#endif
.wbinvd = native_wbinvd,
.read_msr = native_read_msr_safe,
- .read_msr_amd = native_read_msr_amd_safe,
+ .rdmsr_regs = native_rdmsr_safe_regs,
.write_msr = native_write_msr_safe,
+ .wrmsr_regs = native_wrmsr_safe_regs,
.read_tsc = native_read_tsc,
.read_pmc = native_read_pmc,
.read_tscp = native_read_tscp,
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bc..d71c865 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -3,6 +3,7 @@
#include <linux/dmar.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
+#include <linux/kmemleak.h>
#include <asm/proto.h>
#include <asm/dma.h>
@@ -32,7 +33,14 @@
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
-int iommu_pass_through;
+/*
+ * This variable becomes 1 if iommu=pt is passed on the kernel command line.
+ * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * devices and allow every device to access to whole physical memory. This is
+ * useful if a user want to use an IOMMU only for KVM device assignment to
+ * guests and not for driver dma translation.
+ */
+int iommu_pass_through __read_mostly;
dma_addr_t bad_dma_address __read_mostly = 0;
EXPORT_SYMBOL(bad_dma_address);
@@ -88,6 +96,11 @@
size = roundup(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
512ULL<<20);
+ /*
+ * Kmemleak should not scan this block as it may not be mapped via the
+ * kernel direct mapping.
+ */
+ kmemleak_ignore(dma32_bootmem_ptr);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
@@ -147,7 +160,7 @@
return NULL;
addr = page_to_phys(page);
- if (!is_buffer_dma_capable(dma_mask, addr, size)) {
+ if (addr + size > dma_mask) {
__free_pages(page, get_order(size));
if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) {
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index d2e56b8..98a827e 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -190,14 +190,13 @@
static inline int
need_iommu(struct device *dev, unsigned long addr, size_t size)
{
- return force_iommu ||
- !is_buffer_dma_capable(*dev->dma_mask, addr, size);
+ return force_iommu || !dma_capable(dev, addr, size);
}
static inline int
nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
{
- return !is_buffer_dma_capable(*dev->dma_mask, addr, size);
+ return !dma_capable(dev, addr, size);
}
/* Map a single continuous physical area into the IOMMU.
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 71d412a..a3933d4 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -14,7 +14,7 @@
static int
check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
{
- if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) {
+ if (hwdev && !dma_capable(hwdev, bus, size)) {
if (*hwdev->dma_mask >= DMA_BIT_MASK(32))
printk(KERN_ERR
"nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
@@ -79,12 +79,29 @@
free_pages((unsigned long)vaddr, get_order(size));
}
+static void nommu_sync_single_for_device(struct device *dev,
+ dma_addr_t addr, size_t size,
+ enum dma_data_direction dir)
+{
+ flush_write_buffers();
+}
+
+
+static void nommu_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
+{
+ flush_write_buffers();
+}
+
struct dma_map_ops nommu_dma_ops = {
- .alloc_coherent = dma_generic_alloc_coherent,
- .free_coherent = nommu_free_coherent,
- .map_sg = nommu_map_sg,
- .map_page = nommu_map_page,
- .is_phys = 1,
+ .alloc_coherent = dma_generic_alloc_coherent,
+ .free_coherent = nommu_free_coherent,
+ .map_sg = nommu_map_sg,
+ .map_page = nommu_map_page,
+ .sync_single_for_device = nommu_sync_single_for_device,
+ .sync_sg_for_device = nommu_sync_sg_for_device,
+ .is_phys = 1,
};
void __init no_iommu_init(void)
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 6af96ee..e8a3501 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,31 +13,6 @@
int swiotlb __read_mostly;
-void * __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
-{
- return alloc_bootmem_low_pages(size);
-}
-
-void *swiotlb_alloc(unsigned order, unsigned long nslabs)
-{
- return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-}
-
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
- return paddr;
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-{
- return baddr;
-}
-
-int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
-{
- return 0;
-}
-
static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags)
{
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 994dd6a..071166a 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -519,16 +519,12 @@
if (!cpumask_test_cpu(cpu, c1e_mask)) {
cpumask_set_cpu(cpu, c1e_mask);
/*
- * Force broadcast so ACPI can not interfere. Needs
- * to run with interrupts enabled as it uses
- * smp_function_call.
+ * Force broadcast so ACPI can not interfere.
*/
- local_irq_enable();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
cpu);
- local_irq_disable();
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 59f4524..4cf7956 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -61,9 +61,6 @@
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
-EXPORT_PER_CPU_SYMBOL(current_task);
-
/*
* Return saved PC of a blocked thread.
*/
@@ -350,14 +347,21 @@
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
+ bool preload_fpu;
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
+ /*
+ * If the task has used fpu the last 5 timeslices, just do a full
+ * restore of the math state immediately to avoid the trap; the
+ * chances of needing FPU soon are obviously high now
+ */
+ preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
+
__unlazy_fpu(prev_p);
-
/* we're going to use this soon, after a few expensive things */
- if (next_p->fpu_counter > 5)
+ if (preload_fpu)
prefetch(next->xstate);
/*
@@ -398,6 +402,11 @@
task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
__switch_to_xtra(prev_p, next_p, tss);
+ /* If we're going to preload the fpu context, make sure clts
+ is run while we're batching the cpu state updates. */
+ if (preload_fpu)
+ clts();
+
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
@@ -407,15 +416,8 @@
*/
arch_end_context_switch(next_p);
- /* If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- *
- * tsk_used_math() checks prevent calling math_state_restore(),
- * which can sleep in the case of !tsk_used_math()
- */
- if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
- math_state_restore();
+ if (preload_fpu)
+ __math_state_restore();
/*
* Restore %gs if needed (which is common)
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ebefb54..ad535b6 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -55,9 +55,6 @@
asmlinkage extern void ret_from_fork(void);
-DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
-EXPORT_PER_CPU_SYMBOL(current_task);
-
DEFINE_PER_CPU(unsigned long, old_rsp);
static DEFINE_PER_CPU(unsigned char, is_idle);
@@ -386,9 +383,17 @@
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
unsigned fsindex, gsindex;
+ bool preload_fpu;
+
+ /*
+ * If the task has used fpu the last 5 timeslices, just do a full
+ * restore of the math state immediately to avoid the trap; the
+ * chances of needing FPU soon are obviously high now
+ */
+ preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
/* we're going to use this soon, after a few expensive things */
- if (next_p->fpu_counter > 5)
+ if (preload_fpu)
prefetch(next->xstate);
/*
@@ -419,6 +424,13 @@
load_TLS(next, cpu);
+ /* Must be after DS reload */
+ unlazy_fpu(prev_p);
+
+ /* Make sure cpu is ready for new context */
+ if (preload_fpu)
+ clts();
+
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
@@ -459,9 +471,6 @@
wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
prev->gsindex = gsindex;
- /* Must be after DS reload */
- unlazy_fpu(prev_p);
-
/*
* Switch the PDA and FPU contexts.
*/
@@ -480,15 +489,12 @@
task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
__switch_to_xtra(prev_p, next_p, tss);
- /* If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- *
- * tsk_used_math() checks prevent calling math_state_restore(),
- * which can sleep in the case of !tsk_used_math()
+ /*
+ * Preload the FPU context, now that we've determined that the
+ * task is likely to be using it.
*/
- if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
- math_state_restore();
+ if (preload_fpu)
+ __math_state_restore();
return prev_p;
}
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 09ecbde..8d7d5c9 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -35,10 +35,11 @@
#include <asm/proto.h>
#include <asm/ds.h>
-#include <trace/syscall.h>
-
#include "tls.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
enum x86_regset {
REGSET_GENERAL,
REGSET_FP,
@@ -1497,8 +1498,8 @@
tracehook_report_syscall_entry(regs))
ret = -1L;
- if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
- ftrace_syscall_enter(regs);
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_enter(regs, regs->orig_ax);
if (unlikely(current->audit_context)) {
if (IS_IA32)
@@ -1523,8 +1524,8 @@
if (unlikely(current->audit_context))
audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
- if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
- ftrace_syscall_exit(regs);
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_exit(regs, regs->ax);
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(regs, 0);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 4c57875..81e58238 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -869,6 +869,8 @@
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda6..c36cc14 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -434,7 +434,8 @@
* For perf, we return last level cache shared map.
* And for power savings, we return cpu_core_map
*/
- if (sched_mc_power_savings || sched_smt_power_savings)
+ if ((sched_mc_power_savings || sched_smt_power_savings) &&
+ !(cpu_has(c, X86_FEATURE_AMD_DCM)))
return cpu_core_mask(cpu);
else
return c->llc_shared_map;
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index e8b9863..3149032 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -4,6 +4,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/ptrace.h>
+#include <asm/desc.h>
unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
{
@@ -23,7 +24,7 @@
* and APM bios ones we just ignore here.
*/
if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) {
- u32 *desc;
+ struct desc_struct *desc;
unsigned long base;
seg &= ~7UL;
@@ -33,12 +34,10 @@
addr = -1L; /* bogus selector, access would fault */
else {
desc = child->mm->context.ldt + seg;
- base = ((desc[0] >> 16) |
- ((desc[1] & 0xff) << 16) |
- (desc[1] & 0xff000000));
+ base = get_desc_base(desc);
/* 16-bit code segment? */
- if (!((desc[1] >> 22) & 1))
+ if (!desc->d)
addr &= 0xffff;
addr += base;
}
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 6bc211a..45e00eb 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -18,9 +18,9 @@
#include <asm/ia32.h>
#include <asm/syscalls.h>
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long off)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags,
+ unsigned long, fd, unsigned long, off)
{
long error;
struct file *file;
@@ -226,7 +226,7 @@
}
-asmlinkage long sys_uname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(uname, struct new_utsname __user *, name)
{
int err;
down_read(&uts_sem);
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 77b9689..503c1f2 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -640,13 +640,13 @@
if (!is_uv_system())
return 0;
- proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL);
+ proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
+ &proc_uv_ptc_operations);
if (!proc_uv_ptc) {
printk(KERN_ERR "unable to create %s proc entry\n",
UV_PTC_BASENAME);
return -EINVAL;
}
- proc_uv_ptc->proc_fops = &proc_uv_ptc_operations;
return 0;
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5204332..8326492 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -76,7 +76,7 @@
* F0 0F bug workaround.. We have a special link segment
* for this.
*/
-gate_desc idt_table[256]
+gate_desc idt_table[NR_VECTORS]
__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
#endif
@@ -786,27 +786,6 @@
#endif
}
-#ifdef CONFIG_X86_32
-unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
-{
- struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
- unsigned long base = (kesp - uesp) & -THREAD_SIZE;
- unsigned long new_kesp = kesp - base;
- unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
- __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
-
- /* Set up base for espfix segment */
- desc &= 0x00f0ff0000000000ULL;
- desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
- ((((__u64)base) << 32) & 0xff00000000000000ULL) |
- ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
- (lim_pages & 0xffff);
- *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
-
- return new_kesp;
-}
-#endif
-
asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
{
}
@@ -816,6 +795,28 @@
}
/*
+ * __math_state_restore assumes that cr0.TS is already clear and the
+ * fpu state is all ready for use. Used during context switch.
+ */
+void __math_state_restore(void)
+{
+ struct thread_info *thread = current_thread_info();
+ struct task_struct *tsk = thread->task;
+
+ /*
+ * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+ */
+ if (unlikely(restore_fpu_checking(tsk))) {
+ stts();
+ force_sig(SIGSEGV, tsk);
+ return;
+ }
+
+ thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
+ tsk->fpu_counter++;
+}
+
+/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
@@ -846,17 +847,8 @@
}
clts(); /* Allow maths ops (or we recurse) */
- /*
- * Paranoid restore. send a SIGSEGV if we fail to restore the state.
- */
- if (unlikely(restore_fpu_checking(tsk))) {
- stts();
- force_sig(SIGSEGV, tsk);
- return;
- }
- thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
- tsk->fpu_counter++;
+ __math_state_restore();
}
EXPORT_SYMBOL_GPL(math_state_restore);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 78d185d..9fc1782 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -46,11 +46,10 @@
data PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_X86_64
user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(7); /* RWE */
#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
+ init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
@@ -103,65 +102,43 @@
__stop___ex_table = .;
} :text = 0x9090
- RODATA
+ RO_DATA(PAGE_SIZE)
/* Data */
- . = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
+
+ /* init_task */
+ INIT_TASK_DATA(THREAD_SIZE)
+
+#ifdef CONFIG_X86_32
+ /* 32 bit has nosave before _edata */
+ NOSAVE_DATA
+#endif
+
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
+ *(.data.idt)
+
+ CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
+
DATA_DATA
CONSTRUCTORS
- } :data
-#ifdef CONFIG_X86_32
- /* 32 bit has nosave before _edata */
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
-#endif
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
- *(.data.idt)
- }
-
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
- .data.cacheline_aligned :
- AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
-
- /* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ /* rarely changed data like cpu maps */
+ READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
/* End of data section */
_edata = .;
- }
+ } :data
#ifdef CONFIG_X86_64
#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -227,35 +204,29 @@
#endif /* CONFIG_X86_64 */
- /* init_task */
- . = ALIGN(THREAD_SIZE);
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
- }
-#ifdef CONFIG_X86_64
- :data.init
-#endif
-
- /*
- * smp_locks might be freed after init
- * start/end must be page aligned
- */
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- }
-
/* Init code and data - will be freed after init */
. = ALIGN(PAGE_SIZE);
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
__init_begin = .; /* paired with __init_end */
+ }
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
+ /*
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - .init.text - should
+ * start another segment - init.
+ */
+ PERCPU_VADDR(0, :percpu)
+#endif
+
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
INIT_TEXT
_einittext = .;
}
+#ifdef CONFIG_X86_64
+ :init
+#endif
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
@@ -326,17 +297,7 @@
}
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU(PAGE_SIZE)
#endif
@@ -347,15 +308,22 @@
__init_end = .;
}
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2
- /* use another section data.init2, see PERCPU_VADDR() above */
+ NOSAVE_DATA
+ }
#endif
/* BSS */
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8600a09..b84e571 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -1,12 +1,8 @@
#
# KVM configuration
#
-config HAVE_KVM
- bool
-config HAVE_KVM_IRQCHIP
- bool
- default y
+source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
@@ -29,6 +25,9 @@
select PREEMPT_NOTIFIERS
select MMU_NOTIFIER
select ANON_INODES
+ select HAVE_KVM_IRQCHIP
+ select HAVE_KVM_EVENTFD
+ select KVM_APIC_ARCHITECTURE
---help---
Support hosting fully virtualized guest machines using hardware
virtualization extensions. You will need a fairly recent
@@ -63,18 +62,6 @@
To compile this as a module, choose M here: the module
will be called kvm-amd.
-config KVM_TRACE
- bool "KVM trace support"
- depends on KVM && SYSFS
- select MARKERS
- select RELAY
- select DEBUG_FS
- default n
- ---help---
- This option allows reading a trace of kvm-related events through
- relayfs. Note the ABI is not considered stable and will be
- modified in future updates.
-
# OK, it's a little counter-intuitive to do this, but it puts it neatly under
# the virtualization menu.
source drivers/lguest/Kconfig
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index b43c4ef..0e7fe78 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -1,22 +1,19 @@
-#
-# Makefile for Kernel-based Virtual Machine module
-#
-
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
- coalesced_mmio.o irq_comm.o)
-ifeq ($(CONFIG_KVM_TRACE),y)
-common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
-endif
-ifeq ($(CONFIG_IOMMU_API),y)
-common-objs += $(addprefix ../../../virt/kvm/, iommu.o)
-endif
EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
-kvm-objs := $(common-objs) x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
- i8254.o timer.o
-obj-$(CONFIG_KVM) += kvm.o
-kvm-intel-objs = vmx.o
-obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
-kvm-amd-objs = svm.o
-obj-$(CONFIG_KVM_AMD) += kvm-amd.o
+CFLAGS_x86.o := -I.
+CFLAGS_svm.o := -I.
+CFLAGS_vmx.o := -I.
+
+kvm-y += $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+ coalesced_mmio.o irq_comm.o eventfd.o)
+kvm-$(CONFIG_IOMMU_API) += $(addprefix ../../../virt/kvm/, iommu.o)
+
+kvm-y += x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
+ i8254.o timer.o
+kvm-intel-y += vmx.o
+kvm-amd-y += svm.o
+
+obj-$(CONFIG_KVM) += kvm.o
+obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
+obj-$(CONFIG_KVM_AMD) += kvm-amd.o
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
new file mode 100644
index 0000000..1be5cd6
--- /dev/null
+++ b/arch/x86/kvm/emulate.c
@@ -0,0 +1,2392 @@
+/******************************************************************************
+ * emulate.c
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * Linux coding style, mod r/m decoder, segment base fixes, real-mode
+ * privileged instructions:
+ *
+ * Copyright (C) 2006 Qumranet
+ *
+ * Avi Kivity <avi@qumranet.com>
+ * Yaniv Kamay <yaniv@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef __KERNEL__
+#include <stdio.h>
+#include <stdint.h>
+#include <public/xen.h>
+#define DPRINTF(_f, _a ...) printf(_f , ## _a)
+#else
+#include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
+#define DPRINTF(x...) do {} while (0)
+#endif
+#include <linux/module.h>
+#include <asm/kvm_emulate.h>
+
+#include "mmu.h" /* for is_long_mode() */
+
+/*
+ * Opcode effective-address decode tables.
+ * Note that we only emulate instructions that have at least one memory
+ * operand (excluding implicit stack references). We assume that stack
+ * references and instruction fetches will never occur in special memory
+ * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
+ * not be handled.
+ */
+
+/* Operand sizes: 8-bit operands or specified/overridden size. */
+#define ByteOp (1<<0) /* 8-bit operands. */
+/* Destination operand type. */
+#define ImplicitOps (1<<1) /* Implicit in opcode. No generic decode. */
+#define DstReg (2<<1) /* Register operand. */
+#define DstMem (3<<1) /* Memory operand. */
+#define DstAcc (4<<1) /* Destination Accumulator */
+#define DstMask (7<<1)
+/* Source operand type. */
+#define SrcNone (0<<4) /* No source operand. */
+#define SrcImplicit (0<<4) /* Source operand is implicit in the opcode. */
+#define SrcReg (1<<4) /* Register operand. */
+#define SrcMem (2<<4) /* Memory operand. */
+#define SrcMem16 (3<<4) /* Memory operand (16-bit). */
+#define SrcMem32 (4<<4) /* Memory operand (32-bit). */
+#define SrcImm (5<<4) /* Immediate operand. */
+#define SrcImmByte (6<<4) /* 8-bit sign-extended immediate operand. */
+#define SrcOne (7<<4) /* Implied '1' */
+#define SrcImmUByte (8<<4) /* 8-bit unsigned immediate operand. */
+#define SrcImmU (9<<4) /* Immediate operand, unsigned */
+#define SrcMask (0xf<<4)
+/* Generic ModRM decode. */
+#define ModRM (1<<8)
+/* Destination is only written; never read. */
+#define Mov (1<<9)
+#define BitOp (1<<10)
+#define MemAbs (1<<11) /* Memory operand is absolute displacement */
+#define String (1<<12) /* String instruction (rep capable) */
+#define Stack (1<<13) /* Stack instruction (push/pop) */
+#define Group (1<<14) /* Bits 3:5 of modrm byte extend opcode */
+#define GroupDual (1<<15) /* Alternate decoding of mod == 3 */
+#define GroupMask 0xff /* Group number stored in bits 0:7 */
+/* Source 2 operand type */
+#define Src2None (0<<29)
+#define Src2CL (1<<29)
+#define Src2ImmByte (2<<29)
+#define Src2One (3<<29)
+#define Src2Imm16 (4<<29)
+#define Src2Mask (7<<29)
+
+enum {
+ Group1_80, Group1_81, Group1_82, Group1_83,
+ Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
+};
+
+static u32 opcode_table[256] = {
+ /* 0x00 - 0x07 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+ /* 0x08 - 0x0F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x10 - 0x17 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+ /* 0x18 - 0x1F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+ /* 0x20 - 0x27 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
+ /* 0x28 - 0x2F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x30 - 0x37 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x38 - 0x3F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+ 0, 0,
+ /* 0x40 - 0x47 */
+ DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
+ /* 0x48 - 0x4F */
+ DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
+ /* 0x50 - 0x57 */
+ SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
+ SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
+ /* 0x58 - 0x5F */
+ DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
+ DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
+ /* 0x60 - 0x67 */
+ 0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
+ 0, 0, 0, 0,
+ /* 0x68 - 0x6F */
+ SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
+ SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps, /* insb, insw/insd */
+ SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps, /* outsb, outsw/outsd */
+ /* 0x70 - 0x77 */
+ SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+ SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+ /* 0x78 - 0x7F */
+ SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+ SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+ /* 0x80 - 0x87 */
+ Group | Group1_80, Group | Group1_81,
+ Group | Group1_82, Group | Group1_83,
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ /* 0x88 - 0x8F */
+ ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
+ ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+ DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+ /* 0x90 - 0x97 */
+ DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
+ /* 0x98 - 0x9F */
+ 0, 0, SrcImm | Src2Imm16, 0,
+ ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
+ /* 0xA0 - 0xA7 */
+ ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
+ ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
+ ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+ ByteOp | ImplicitOps | String, ImplicitOps | String,
+ /* 0xA8 - 0xAF */
+ 0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+ ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+ ByteOp | ImplicitOps | String, ImplicitOps | String,
+ /* 0xB0 - 0xB7 */
+ ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+ ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+ ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+ ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+ /* 0xB8 - 0xBF */
+ DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+ DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+ DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+ DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+ /* 0xC0 - 0xC7 */
+ ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
+ 0, ImplicitOps | Stack, 0, 0,
+ ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
+ /* 0xC8 - 0xCF */
+ 0, 0, 0, ImplicitOps | Stack,
+ ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
+ /* 0xD0 - 0xD7 */
+ ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+ ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+ 0, 0, 0, 0,
+ /* 0xD8 - 0xDF */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xE0 - 0xE7 */
+ 0, 0, 0, 0,
+ ByteOp | SrcImmUByte, SrcImmUByte,
+ ByteOp | SrcImmUByte, SrcImmUByte,
+ /* 0xE8 - 0xEF */
+ SrcImm | Stack, SrcImm | ImplicitOps,
+ SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
+ SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+ SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+ /* 0xF0 - 0xF7 */
+ 0, 0, 0, 0,
+ ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
+ /* 0xF8 - 0xFF */
+ ImplicitOps, 0, ImplicitOps, ImplicitOps,
+ ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
+};
+
+static u32 twobyte_table[256] = {
+ /* 0x00 - 0x0F */
+ 0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
+ ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+ /* 0x10 - 0x1F */
+ 0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x20 - 0x2F */
+ ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x30 - 0x3F */
+ ImplicitOps, 0, ImplicitOps, 0,
+ ImplicitOps, ImplicitOps, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x40 - 0x47 */
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ /* 0x48 - 0x4F */
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ /* 0x50 - 0x5F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x60 - 0x6F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x70 - 0x7F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x80 - 0x8F */
+ SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+ SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+ /* 0x90 - 0x9F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xA0 - 0xA7 */
+ 0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+ DstMem | SrcReg | Src2ImmByte | ModRM,
+ DstMem | SrcReg | Src2CL | ModRM, 0, 0,
+ /* 0xA8 - 0xAF */
+ 0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+ DstMem | SrcReg | Src2ImmByte | ModRM,
+ DstMem | SrcReg | Src2CL | ModRM,
+ ModRM, 0,
+ /* 0xB0 - 0xB7 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
+ DstMem | SrcReg | ModRM | BitOp,
+ 0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem16 | ModRM | Mov,
+ /* 0xB8 - 0xBF */
+ 0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
+ 0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem16 | ModRM | Mov,
+ /* 0xC0 - 0xCF */
+ 0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xD0 - 0xDF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xE0 - 0xEF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xF0 - 0xFF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static u32 group_table[] = {
+ [Group1_80*8] =
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ [Group1_81*8] =
+ DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+ DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+ DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+ DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+ [Group1_82*8] =
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+ [Group1_83*8] =
+ DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+ DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+ DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+ DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+ [Group1A*8] =
+ DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
+ [Group3_Byte*8] =
+ ByteOp | SrcImm | DstMem | ModRM, 0,
+ ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+ 0, 0, 0, 0,
+ [Group3*8] =
+ DstMem | SrcImm | ModRM, 0,
+ DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+ 0, 0, 0, 0,
+ [Group4*8] =
+ ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+ 0, 0, 0, 0, 0, 0,
+ [Group5*8] =
+ DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+ SrcMem | ModRM | Stack, 0,
+ SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
+ [Group7*8] =
+ 0, 0, ModRM | SrcMem, ModRM | SrcMem,
+ SrcNone | ModRM | DstMem | Mov, 0,
+ SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
+};
+
+static u32 group2_table[] = {
+ [Group7*8] =
+ SrcNone | ModRM, 0, 0, SrcNone | ModRM,
+ SrcNone | ModRM | DstMem | Mov, 0,
+ SrcMem16 | ModRM | Mov, 0,
+};
+
+/* EFLAGS bit definitions. */
+#define EFLG_VM (1<<17)
+#define EFLG_RF (1<<16)
+#define EFLG_OF (1<<11)
+#define EFLG_DF (1<<10)
+#define EFLG_IF (1<<9)
+#define EFLG_SF (1<<7)
+#define EFLG_ZF (1<<6)
+#define EFLG_AF (1<<4)
+#define EFLG_PF (1<<2)
+#define EFLG_CF (1<<0)
+
+/*
+ * Instruction emulation:
+ * Most instructions are emulated directly via a fragment of inline assembly
+ * code. This allows us to save/restore EFLAGS and thus very easily pick up
+ * any modified flags.
+ */
+
+#if defined(CONFIG_X86_64)
+#define _LO32 "k" /* force 32-bit operand */
+#define _STK "%%rsp" /* stack pointer */
+#elif defined(__i386__)
+#define _LO32 "" /* force 32-bit operand */
+#define _STK "%%esp" /* stack pointer */
+#endif
+
+/*
+ * These EFLAGS bits are restored from saved value during emulation, and
+ * any changes are written back to the saved value after emulation.
+ */
+#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
+
+/* Before executing instruction: restore necessary bits in EFLAGS. */
+#define _PRE_EFLAGS(_sav, _msk, _tmp) \
+ /* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
+ "movl %"_sav",%"_LO32 _tmp"; " \
+ "push %"_tmp"; " \
+ "push %"_tmp"; " \
+ "movl %"_msk",%"_LO32 _tmp"; " \
+ "andl %"_LO32 _tmp",("_STK"); " \
+ "pushf; " \
+ "notl %"_LO32 _tmp"; " \
+ "andl %"_LO32 _tmp",("_STK"); " \
+ "andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); " \
+ "pop %"_tmp"; " \
+ "orl %"_LO32 _tmp",("_STK"); " \
+ "popf; " \
+ "pop %"_sav"; "
+
+/* After executing instruction: write-back necessary bits in EFLAGS. */
+#define _POST_EFLAGS(_sav, _msk, _tmp) \
+ /* _sav |= EFLAGS & _msk; */ \
+ "pushf; " \
+ "pop %"_tmp"; " \
+ "andl %"_msk",%"_LO32 _tmp"; " \
+ "orl %"_LO32 _tmp",%"_sav"; "
+
+#ifdef CONFIG_X86_64
+#define ON64(x) x
+#else
+#define ON64(x)
+#endif
+
+#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix) \
+ do { \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0", "4", "2") \
+ _op _suffix " %"_x"3,%1; " \
+ _POST_EFLAGS("0", "4", "2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : _y ((_src).val), "i" (EFLAGS_MASK)); \
+ } while (0)
+
+
+/* Raw emulation: instruction has two explicit operands. */
+#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
+ do { \
+ unsigned long _tmp; \
+ \
+ switch ((_dst).bytes) { \
+ case 2: \
+ ____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w"); \
+ break; \
+ case 4: \
+ ____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l"); \
+ break; \
+ case 8: \
+ ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q")); \
+ break; \
+ } \
+ } while (0)
+
+#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
+ do { \
+ unsigned long _tmp; \
+ switch ((_dst).bytes) { \
+ case 1: \
+ ____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b"); \
+ break; \
+ default: \
+ __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
+ _wx, _wy, _lx, _ly, _qx, _qy); \
+ break; \
+ } \
+ } while (0)
+
+/* Source operand is byte-sized and may be restricted to just %cl. */
+#define emulate_2op_SrcB(_op, _src, _dst, _eflags) \
+ __emulate_2op(_op, _src, _dst, _eflags, \
+ "b", "c", "b", "c", "b", "c", "b", "c")
+
+/* Source operand is byte, word, long or quad sized. */
+#define emulate_2op_SrcV(_op, _src, _dst, _eflags) \
+ __emulate_2op(_op, _src, _dst, _eflags, \
+ "b", "q", "w", "r", _LO32, "r", "", "r")
+
+/* Source operand is word, long or quad sized. */
+#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags) \
+ __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
+ "w", "r", _LO32, "r", "", "r")
+
+/* Instruction has three operands and one operand is stored in ECX register */
+#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) \
+ do { \
+ unsigned long _tmp; \
+ _type _clv = (_cl).val; \
+ _type _srcv = (_src).val; \
+ _type _dstv = (_dst).val; \
+ \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0", "5", "2") \
+ _op _suffix " %4,%1 \n" \
+ _POST_EFLAGS("0", "5", "2") \
+ : "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp) \
+ : "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK) \
+ ); \
+ \
+ (_cl).val = (unsigned long) _clv; \
+ (_src).val = (unsigned long) _srcv; \
+ (_dst).val = (unsigned long) _dstv; \
+ } while (0)
+
+#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags) \
+ do { \
+ switch ((_dst).bytes) { \
+ case 2: \
+ __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
+ "w", unsigned short); \
+ break; \
+ case 4: \
+ __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
+ "l", unsigned int); \
+ break; \
+ case 8: \
+ ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
+ "q", unsigned long)); \
+ break; \
+ } \
+ } while (0)
+
+#define __emulate_1op(_op, _dst, _eflags, _suffix) \
+ do { \
+ unsigned long _tmp; \
+ \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0", "3", "2") \
+ _op _suffix " %1; " \
+ _POST_EFLAGS("0", "3", "2") \
+ : "=m" (_eflags), "+m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : "i" (EFLAGS_MASK)); \
+ } while (0)
+
+/* Instruction has only one explicit operand (no source operand). */
+#define emulate_1op(_op, _dst, _eflags) \
+ do { \
+ switch ((_dst).bytes) { \
+ case 1: __emulate_1op(_op, _dst, _eflags, "b"); break; \
+ case 2: __emulate_1op(_op, _dst, _eflags, "w"); break; \
+ case 4: __emulate_1op(_op, _dst, _eflags, "l"); break; \
+ case 8: ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
+ } \
+ } while (0)
+
+/* Fetch next part of the instruction being emulated. */
+#define insn_fetch(_type, _size, _eip) \
+({ unsigned long _x; \
+ rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size)); \
+ if (rc != 0) \
+ goto done; \
+ (_eip) += (_size); \
+ (_type)_x; \
+})
+
+static inline unsigned long ad_mask(struct decode_cache *c)
+{
+ return (1UL << (c->ad_bytes << 3)) - 1;
+}
+
+/* Access/update address held in a register, based on addressing mode. */
+static inline unsigned long
+address_mask(struct decode_cache *c, unsigned long reg)
+{
+ if (c->ad_bytes == sizeof(unsigned long))
+ return reg;
+ else
+ return reg & ad_mask(c);
+}
+
+static inline unsigned long
+register_address(struct decode_cache *c, unsigned long base, unsigned long reg)
+{
+ return base + address_mask(c, reg);
+}
+
+static inline void
+register_address_increment(struct decode_cache *c, unsigned long *reg, int inc)
+{
+ if (c->ad_bytes == sizeof(unsigned long))
+ *reg += inc;
+ else
+ *reg = (*reg & ~ad_mask(c)) | ((*reg + inc) & ad_mask(c));
+}
+
+static inline void jmp_rel(struct decode_cache *c, int rel)
+{
+ register_address_increment(c, &c->eip, rel);
+}
+
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+ c->has_seg_override = true;
+ c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+ if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+ return 0;
+
+ return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+ struct decode_cache *c)
+{
+ if (!c->has_seg_override)
+ return 0;
+
+ return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+ return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+ return seg_base(ctxt, VCPU_SREG_SS);
+}
+
+static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops,
+ unsigned long linear, u8 *dest)
+{
+ struct fetch_cache *fc = &ctxt->decode.fetch;
+ int rc;
+ int size;
+
+ if (linear < fc->start || linear >= fc->end) {
+ size = min(15UL, PAGE_SIZE - offset_in_page(linear));
+ rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
+ if (rc)
+ return rc;
+ fc->start = linear;
+ fc->end = linear + size;
+ }
+ *dest = fc->data[linear - fc->start];
+ return 0;
+}
+
+static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops,
+ unsigned long eip, void *dest, unsigned size)
+{
+ int rc = 0;
+
+ eip += ctxt->cs_base;
+ while (size--) {
+ rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
+ if (rc)
+ return rc;
+ }
+ return 0;
+}
+
+/*
+ * Given the 'reg' portion of a ModRM byte, and a register block, return a
+ * pointer into the block that addresses the relevant register.
+ * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
+ */
+static void *decode_register(u8 modrm_reg, unsigned long *regs,
+ int highbyte_regs)
+{
+ void *p;
+
+ p = ®s[modrm_reg];
+ if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
+ p = (unsigned char *)®s[modrm_reg & 3] + 1;
+ return p;
+}
+
+static int read_descriptor(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops,
+ void *ptr,
+ u16 *size, unsigned long *address, int op_bytes)
+{
+ int rc;
+
+ if (op_bytes == 2)
+ op_bytes = 3;
+ *address = 0;
+ rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
+ ctxt->vcpu);
+ if (rc)
+ return rc;
+ rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
+ ctxt->vcpu);
+ return rc;
+}
+
+static int test_cc(unsigned int condition, unsigned int flags)
+{
+ int rc = 0;
+
+ switch ((condition & 15) >> 1) {
+ case 0: /* o */
+ rc |= (flags & EFLG_OF);
+ break;
+ case 1: /* b/c/nae */
+ rc |= (flags & EFLG_CF);
+ break;
+ case 2: /* z/e */
+ rc |= (flags & EFLG_ZF);
+ break;
+ case 3: /* be/na */
+ rc |= (flags & (EFLG_CF|EFLG_ZF));
+ break;
+ case 4: /* s */
+ rc |= (flags & EFLG_SF);
+ break;
+ case 5: /* p/pe */
+ rc |= (flags & EFLG_PF);
+ break;
+ case 7: /* le/ng */
+ rc |= (flags & EFLG_ZF);
+ /* fall through */
+ case 6: /* l/nge */
+ rc |= (!(flags & EFLG_SF) != !(flags & EFLG_OF));
+ break;
+ }
+
+ /* Odd condition identifiers (lsb == 1) have inverted sense. */
+ return (!!rc ^ (condition & 1));
+}
+
+static void decode_register_operand(struct operand *op,
+ struct decode_cache *c,
+ int inhibit_bytereg)
+{
+ unsigned reg = c->modrm_reg;
+ int highbyte_regs = c->rex_prefix == 0;
+
+ if (!(c->d & ModRM))
+ reg = (c->b & 7) | ((c->rex_prefix & 1) << 3);
+ op->type = OP_REG;
+ if ((c->d & ByteOp) && !inhibit_bytereg) {
+ op->ptr = decode_register(reg, c->regs, highbyte_regs);
+ op->val = *(u8 *)op->ptr;
+ op->bytes = 1;
+ } else {
+ op->ptr = decode_register(reg, c->regs, 0);
+ op->bytes = c->op_bytes;
+ switch (op->bytes) {
+ case 2:
+ op->val = *(u16 *)op->ptr;
+ break;
+ case 4:
+ op->val = *(u32 *)op->ptr;
+ break;
+ case 8:
+ op->val = *(u64 *) op->ptr;
+ break;
+ }
+ }
+ op->orig_val = op->val;
+}
+
+static int decode_modrm(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ u8 sib;
+ int index_reg = 0, base_reg = 0, scale;
+ int rc = 0;
+
+ if (c->rex_prefix) {
+ c->modrm_reg = (c->rex_prefix & 4) << 1; /* REX.R */
+ index_reg = (c->rex_prefix & 2) << 2; /* REX.X */
+ c->modrm_rm = base_reg = (c->rex_prefix & 1) << 3; /* REG.B */
+ }
+
+ c->modrm = insn_fetch(u8, 1, c->eip);
+ c->modrm_mod |= (c->modrm & 0xc0) >> 6;
+ c->modrm_reg |= (c->modrm & 0x38) >> 3;
+ c->modrm_rm |= (c->modrm & 0x07);
+ c->modrm_ea = 0;
+ c->use_modrm_ea = 1;
+
+ if (c->modrm_mod == 3) {
+ c->modrm_ptr = decode_register(c->modrm_rm,
+ c->regs, c->d & ByteOp);
+ c->modrm_val = *(unsigned long *)c->modrm_ptr;
+ return rc;
+ }
+
+ if (c->ad_bytes == 2) {
+ unsigned bx = c->regs[VCPU_REGS_RBX];
+ unsigned bp = c->regs[VCPU_REGS_RBP];
+ unsigned si = c->regs[VCPU_REGS_RSI];
+ unsigned di = c->regs[VCPU_REGS_RDI];
+
+ /* 16-bit ModR/M decode. */
+ switch (c->modrm_mod) {
+ case 0:
+ if (c->modrm_rm == 6)
+ c->modrm_ea += insn_fetch(u16, 2, c->eip);
+ break;
+ case 1:
+ c->modrm_ea += insn_fetch(s8, 1, c->eip);
+ break;
+ case 2:
+ c->modrm_ea += insn_fetch(u16, 2, c->eip);
+ break;
+ }
+ switch (c->modrm_rm) {
+ case 0:
+ c->modrm_ea += bx + si;
+ break;
+ case 1:
+ c->modrm_ea += bx + di;
+ break;
+ case 2:
+ c->modrm_ea += bp + si;
+ break;
+ case 3:
+ c->modrm_ea += bp + di;
+ break;
+ case 4:
+ c->modrm_ea += si;
+ break;
+ case 5:
+ c->modrm_ea += di;
+ break;
+ case 6:
+ if (c->modrm_mod != 0)
+ c->modrm_ea += bp;
+ break;
+ case 7:
+ c->modrm_ea += bx;
+ break;
+ }
+ if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
+ (c->modrm_rm == 6 && c->modrm_mod != 0))
+ if (!c->has_seg_override)
+ set_seg_override(c, VCPU_SREG_SS);
+ c->modrm_ea = (u16)c->modrm_ea;
+ } else {
+ /* 32/64-bit ModR/M decode. */
+ if ((c->modrm_rm & 7) == 4) {
+ sib = insn_fetch(u8, 1, c->eip);
+ index_reg |= (sib >> 3) & 7;
+ base_reg |= sib & 7;
+ scale = sib >> 6;
+
+ if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+ c->modrm_ea += insn_fetch(s32, 4, c->eip);
+ else
+ c->modrm_ea += c->regs[base_reg];
+ if (index_reg != 4)
+ c->modrm_ea += c->regs[index_reg] << scale;
+ } else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ c->rip_relative = 1;
+ } else
+ c->modrm_ea += c->regs[c->modrm_rm];
+ switch (c->modrm_mod) {
+ case 0:
+ if (c->modrm_rm == 5)
+ c->modrm_ea += insn_fetch(s32, 4, c->eip);
+ break;
+ case 1:
+ c->modrm_ea += insn_fetch(s8, 1, c->eip);
+ break;
+ case 2:
+ c->modrm_ea += insn_fetch(s32, 4, c->eip);
+ break;
+ }
+ }
+done:
+ return rc;
+}
+
+static int decode_abs(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc = 0;
+
+ switch (c->ad_bytes) {
+ case 2:
+ c->modrm_ea = insn_fetch(u16, 2, c->eip);
+ break;
+ case 4:
+ c->modrm_ea = insn_fetch(u32, 4, c->eip);
+ break;
+ case 8:
+ c->modrm_ea = insn_fetch(u64, 8, c->eip);
+ break;
+ }
+done:
+ return rc;
+}
+
+int
+x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc = 0;
+ int mode = ctxt->mode;
+ int def_op_bytes, def_ad_bytes, group;
+
+ /* Shadow copy of register state. Committed on successful emulation. */
+
+ memset(c, 0, sizeof(struct decode_cache));
+ c->eip = kvm_rip_read(ctxt->vcpu);
+ ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
+ memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+
+ switch (mode) {
+ case X86EMUL_MODE_REAL:
+ case X86EMUL_MODE_PROT16:
+ def_op_bytes = def_ad_bytes = 2;
+ break;
+ case X86EMUL_MODE_PROT32:
+ def_op_bytes = def_ad_bytes = 4;
+ break;
+#ifdef CONFIG_X86_64
+ case X86EMUL_MODE_PROT64:
+ def_op_bytes = 4;
+ def_ad_bytes = 8;
+ break;
+#endif
+ default:
+ return -1;
+ }
+
+ c->op_bytes = def_op_bytes;
+ c->ad_bytes = def_ad_bytes;
+
+ /* Legacy prefixes. */
+ for (;;) {
+ switch (c->b = insn_fetch(u8, 1, c->eip)) {
+ case 0x66: /* operand-size override */
+ /* switch between 2/4 bytes */
+ c->op_bytes = def_op_bytes ^ 6;
+ break;
+ case 0x67: /* address-size override */
+ if (mode == X86EMUL_MODE_PROT64)
+ /* switch between 4/8 bytes */
+ c->ad_bytes = def_ad_bytes ^ 12;
+ else
+ /* switch between 2/4 bytes */
+ c->ad_bytes = def_ad_bytes ^ 6;
+ break;
+ case 0x26: /* ES override */
+ case 0x2e: /* CS override */
+ case 0x36: /* SS override */
+ case 0x3e: /* DS override */
+ set_seg_override(c, (c->b >> 3) & 3);
+ break;
+ case 0x64: /* FS override */
+ case 0x65: /* GS override */
+ set_seg_override(c, c->b & 7);
+ break;
+ case 0x40 ... 0x4f: /* REX */
+ if (mode != X86EMUL_MODE_PROT64)
+ goto done_prefixes;
+ c->rex_prefix = c->b;
+ continue;
+ case 0xf0: /* LOCK */
+ c->lock_prefix = 1;
+ break;
+ case 0xf2: /* REPNE/REPNZ */
+ c->rep_prefix = REPNE_PREFIX;
+ break;
+ case 0xf3: /* REP/REPE/REPZ */
+ c->rep_prefix = REPE_PREFIX;
+ break;
+ default:
+ goto done_prefixes;
+ }
+
+ /* Any legacy prefix after a REX prefix nullifies its effect. */
+
+ c->rex_prefix = 0;
+ }
+
+done_prefixes:
+
+ /* REX prefix. */
+ if (c->rex_prefix)
+ if (c->rex_prefix & 8)
+ c->op_bytes = 8; /* REX.W */
+
+ /* Opcode byte(s). */
+ c->d = opcode_table[c->b];
+ if (c->d == 0) {
+ /* Two-byte opcode? */
+ if (c->b == 0x0f) {
+ c->twobyte = 1;
+ c->b = insn_fetch(u8, 1, c->eip);
+ c->d = twobyte_table[c->b];
+ }
+ }
+
+ if (c->d & Group) {
+ group = c->d & GroupMask;
+ c->modrm = insn_fetch(u8, 1, c->eip);
+ --c->eip;
+
+ group = (group << 3) + ((c->modrm >> 3) & 7);
+ if ((c->d & GroupDual) && (c->modrm >> 6) == 3)
+ c->d = group2_table[group];
+ else
+ c->d = group_table[group];
+ }
+
+ /* Unrecognised? */
+ if (c->d == 0) {
+ DPRINTF("Cannot emulate %02x\n", c->b);
+ return -1;
+ }
+
+ if (mode == X86EMUL_MODE_PROT64 && (c->d & Stack))
+ c->op_bytes = 8;
+
+ /* ModRM and SIB bytes. */
+ if (c->d & ModRM)
+ rc = decode_modrm(ctxt, ops);
+ else if (c->d & MemAbs)
+ rc = decode_abs(ctxt, ops);
+ if (rc)
+ goto done;
+
+ if (!c->has_seg_override)
+ set_seg_override(c, VCPU_SREG_DS);
+
+ if (!(!c->twobyte && c->b == 0x8d))
+ c->modrm_ea += seg_override_base(ctxt, c);
+
+ if (c->ad_bytes != 8)
+ c->modrm_ea = (u32)c->modrm_ea;
+ /*
+ * Decode and fetch the source operand: register, memory
+ * or immediate.
+ */
+ switch (c->d & SrcMask) {
+ case SrcNone:
+ break;
+ case SrcReg:
+ decode_register_operand(&c->src, c, 0);
+ break;
+ case SrcMem16:
+ c->src.bytes = 2;
+ goto srcmem_common;
+ case SrcMem32:
+ c->src.bytes = 4;
+ goto srcmem_common;
+ case SrcMem:
+ c->src.bytes = (c->d & ByteOp) ? 1 :
+ c->op_bytes;
+ /* Don't fetch the address for invlpg: it could be unmapped. */
+ if (c->twobyte && c->b == 0x01 && c->modrm_reg == 7)
+ break;
+ srcmem_common:
+ /*
+ * For instructions with a ModR/M byte, switch to register
+ * access if Mod = 3.
+ */
+ if ((c->d & ModRM) && c->modrm_mod == 3) {
+ c->src.type = OP_REG;
+ c->src.val = c->modrm_val;
+ c->src.ptr = c->modrm_ptr;
+ break;
+ }
+ c->src.type = OP_MEM;
+ break;
+ case SrcImm:
+ case SrcImmU:
+ c->src.type = OP_IMM;
+ c->src.ptr = (unsigned long *)c->eip;
+ c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ if (c->src.bytes == 8)
+ c->src.bytes = 4;
+ /* NB. Immediates are sign-extended as necessary. */
+ switch (c->src.bytes) {
+ case 1:
+ c->src.val = insn_fetch(s8, 1, c->eip);
+ break;
+ case 2:
+ c->src.val = insn_fetch(s16, 2, c->eip);
+ break;
+ case 4:
+ c->src.val = insn_fetch(s32, 4, c->eip);
+ break;
+ }
+ if ((c->d & SrcMask) == SrcImmU) {
+ switch (c->src.bytes) {
+ case 1:
+ c->src.val &= 0xff;
+ break;
+ case 2:
+ c->src.val &= 0xffff;
+ break;
+ case 4:
+ c->src.val &= 0xffffffff;
+ break;
+ }
+ }
+ break;
+ case SrcImmByte:
+ case SrcImmUByte:
+ c->src.type = OP_IMM;
+ c->src.ptr = (unsigned long *)c->eip;
+ c->src.bytes = 1;
+ if ((c->d & SrcMask) == SrcImmByte)
+ c->src.val = insn_fetch(s8, 1, c->eip);
+ else
+ c->src.val = insn_fetch(u8, 1, c->eip);
+ break;
+ case SrcOne:
+ c->src.bytes = 1;
+ c->src.val = 1;
+ break;
+ }
+
+ /*
+ * Decode and fetch the second source operand: register, memory
+ * or immediate.
+ */
+ switch (c->d & Src2Mask) {
+ case Src2None:
+ break;
+ case Src2CL:
+ c->src2.bytes = 1;
+ c->src2.val = c->regs[VCPU_REGS_RCX] & 0x8;
+ break;
+ case Src2ImmByte:
+ c->src2.type = OP_IMM;
+ c->src2.ptr = (unsigned long *)c->eip;
+ c->src2.bytes = 1;
+ c->src2.val = insn_fetch(u8, 1, c->eip);
+ break;
+ case Src2Imm16:
+ c->src2.type = OP_IMM;
+ c->src2.ptr = (unsigned long *)c->eip;
+ c->src2.bytes = 2;
+ c->src2.val = insn_fetch(u16, 2, c->eip);
+ break;
+ case Src2One:
+ c->src2.bytes = 1;
+ c->src2.val = 1;
+ break;
+ }
+
+ /* Decode and fetch the destination operand: register or memory. */
+ switch (c->d & DstMask) {
+ case ImplicitOps:
+ /* Special instructions do their own operand decoding. */
+ return 0;
+ case DstReg:
+ decode_register_operand(&c->dst, c,
+ c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
+ break;
+ case DstMem:
+ if ((c->d & ModRM) && c->modrm_mod == 3) {
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->dst.type = OP_REG;
+ c->dst.val = c->dst.orig_val = c->modrm_val;
+ c->dst.ptr = c->modrm_ptr;
+ break;
+ }
+ c->dst.type = OP_MEM;
+ break;
+ case DstAcc:
+ c->dst.type = OP_REG;
+ c->dst.bytes = c->op_bytes;
+ c->dst.ptr = &c->regs[VCPU_REGS_RAX];
+ switch (c->op_bytes) {
+ case 1:
+ c->dst.val = *(u8 *)c->dst.ptr;
+ break;
+ case 2:
+ c->dst.val = *(u16 *)c->dst.ptr;
+ break;
+ case 4:
+ c->dst.val = *(u32 *)c->dst.ptr;
+ break;
+ }
+ c->dst.orig_val = c->dst.val;
+ break;
+ }
+
+ if (c->rip_relative)
+ c->modrm_ea += c->eip;
+
+done:
+ return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
+}
+
+static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+
+ c->dst.type = OP_MEM;
+ c->dst.bytes = c->op_bytes;
+ c->dst.val = c->src.val;
+ register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
+ c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
+ c->regs[VCPU_REGS_RSP]);
+}
+
+static int emulate_pop(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops,
+ void *dest, int len)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc;
+
+ rc = ops->read_emulated(register_address(c, ss_base(ctxt),
+ c->regs[VCPU_REGS_RSP]),
+ dest, len, ctxt->vcpu);
+ if (rc != 0)
+ return rc;
+
+ register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
+ return rc;
+}
+
+static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc;
+
+ rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
+ if (rc != 0)
+ return rc;
+ return 0;
+}
+
+static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+ switch (c->modrm_reg) {
+ case 0: /* rol */
+ emulate_2op_SrcB("rol", c->src, c->dst, ctxt->eflags);
+ break;
+ case 1: /* ror */
+ emulate_2op_SrcB("ror", c->src, c->dst, ctxt->eflags);
+ break;
+ case 2: /* rcl */
+ emulate_2op_SrcB("rcl", c->src, c->dst, ctxt->eflags);
+ break;
+ case 3: /* rcr */
+ emulate_2op_SrcB("rcr", c->src, c->dst, ctxt->eflags);
+ break;
+ case 4: /* sal/shl */
+ case 6: /* sal/shl */
+ emulate_2op_SrcB("sal", c->src, c->dst, ctxt->eflags);
+ break;
+ case 5: /* shr */
+ emulate_2op_SrcB("shr", c->src, c->dst, ctxt->eflags);
+ break;
+ case 7: /* sar */
+ emulate_2op_SrcB("sar", c->src, c->dst, ctxt->eflags);
+ break;
+ }
+}
+
+static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc = 0;
+
+ switch (c->modrm_reg) {
+ case 0 ... 1: /* test */
+ emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
+ break;
+ case 2: /* not */
+ c->dst.val = ~c->dst.val;
+ break;
+ case 3: /* neg */
+ emulate_1op("neg", c->dst, ctxt->eflags);
+ break;
+ default:
+ DPRINTF("Cannot emulate %02x\n", c->b);
+ rc = X86EMUL_UNHANDLEABLE;
+ break;
+ }
+ return rc;
+}
+
+static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+
+ switch (c->modrm_reg) {
+ case 0: /* inc */
+ emulate_1op("inc", c->dst, ctxt->eflags);
+ break;
+ case 1: /* dec */
+ emulate_1op("dec", c->dst, ctxt->eflags);
+ break;
+ case 2: /* call near abs */ {
+ long int old_eip;
+ old_eip = c->eip;
+ c->eip = c->src.val;
+ c->src.val = old_eip;
+ emulate_push(ctxt);
+ break;
+ }
+ case 4: /* jmp abs */
+ c->eip = c->src.val;
+ break;
+ case 6: /* push */
+ emulate_push(ctxt);
+ break;
+ }
+ return 0;
+}
+
+static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops,
+ unsigned long memop)
+{
+ struct decode_cache *c = &ctxt->decode;
+ u64 old, new;
+ int rc;
+
+ rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
+ if (rc != 0)
+ return rc;
+
+ if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
+ ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
+
+ c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
+ c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
+ ctxt->eflags &= ~EFLG_ZF;
+
+ } else {
+ new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
+ (u32) c->regs[VCPU_REGS_RBX];
+
+ rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
+ if (rc != 0)
+ return rc;
+ ctxt->eflags |= EFLG_ZF;
+ }
+ return 0;
+}
+
+static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc;
+ unsigned long cs;
+
+ rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
+ if (rc)
+ return rc;
+ if (c->op_bytes == 4)
+ c->eip = (u32)c->eip;
+ rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
+ if (rc)
+ return rc;
+ rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
+ return rc;
+}
+
+static inline int writeback(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ int rc;
+ struct decode_cache *c = &ctxt->decode;
+
+ switch (c->dst.type) {
+ case OP_REG:
+ /* The 4-byte case *is* correct:
+ * in 64-bit mode we zero-extend.
+ */
+ switch (c->dst.bytes) {
+ case 1:
+ *(u8 *)c->dst.ptr = (u8)c->dst.val;
+ break;
+ case 2:
+ *(u16 *)c->dst.ptr = (u16)c->dst.val;
+ break;
+ case 4:
+ *c->dst.ptr = (u32)c->dst.val;
+ break; /* 64b: zero-ext */
+ case 8:
+ *c->dst.ptr = c->dst.val;
+ break;
+ }
+ break;
+ case OP_MEM:
+ if (c->lock_prefix)
+ rc = ops->cmpxchg_emulated(
+ (unsigned long)c->dst.ptr,
+ &c->dst.orig_val,
+ &c->dst.val,
+ c->dst.bytes,
+ ctxt->vcpu);
+ else
+ rc = ops->write_emulated(
+ (unsigned long)c->dst.ptr,
+ &c->dst.val,
+ c->dst.bytes,
+ ctxt->vcpu);
+ if (rc != 0)
+ return rc;
+ break;
+ case OP_NONE:
+ /* no writeback */
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+{
+ u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
+ /*
+ * an sti; sti; sequence only disable interrupts for the first
+ * instruction. So, if the last instruction, be it emulated or
+ * not, left the system with the INT_STI flag enabled, it
+ * means that the last instruction is an sti. We should not
+ * leave the flag on in this case. The same goes for mov ss
+ */
+ if (!(int_shadow & mask))
+ ctxt->interruptibility = mask;
+}
+
+static inline void
+setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
+ struct kvm_segment *cs, struct kvm_segment *ss)
+{
+ memset(cs, 0, sizeof(struct kvm_segment));
+ kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
+ memset(ss, 0, sizeof(struct kvm_segment));
+
+ cs->l = 0; /* will be adjusted later */
+ cs->base = 0; /* flat segment */
+ cs->g = 1; /* 4kb granularity */
+ cs->limit = 0xffffffff; /* 4GB limit */
+ cs->type = 0x0b; /* Read, Execute, Accessed */
+ cs->s = 1;
+ cs->dpl = 0; /* will be adjusted later */
+ cs->present = 1;
+ cs->db = 1;
+
+ ss->unusable = 0;
+ ss->base = 0; /* flat segment */
+ ss->limit = 0xffffffff; /* 4GB limit */
+ ss->g = 1; /* 4kb granularity */
+ ss->s = 1;
+ ss->type = 0x03; /* Read/Write, Accessed */
+ ss->db = 1; /* 32bit stack segment */
+ ss->dpl = 0;
+ ss->present = 1;
+}
+
+static int
+emulate_syscall(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+ struct kvm_segment cs, ss;
+ u64 msr_data;
+
+ /* syscall is not available in real mode */
+ if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
+ || !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
+ return -1;
+
+ setup_syscalls_segments(ctxt, &cs, &ss);
+
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+ msr_data >>= 32;
+ cs.selector = (u16)(msr_data & 0xfffc);
+ ss.selector = (u16)(msr_data + 8);
+
+ if (is_long_mode(ctxt->vcpu)) {
+ cs.db = 0;
+ cs.l = 1;
+ }
+ kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+ kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+ c->regs[VCPU_REGS_RCX] = c->eip;
+ if (is_long_mode(ctxt->vcpu)) {
+#ifdef CONFIG_X86_64
+ c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
+
+ kvm_x86_ops->get_msr(ctxt->vcpu,
+ ctxt->mode == X86EMUL_MODE_PROT64 ?
+ MSR_LSTAR : MSR_CSTAR, &msr_data);
+ c->eip = msr_data;
+
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
+ ctxt->eflags &= ~(msr_data | EFLG_RF);
+#endif
+ } else {
+ /* legacy mode */
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+ c->eip = (u32)msr_data;
+
+ ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+ }
+
+ return 0;
+}
+
+static int
+emulate_sysenter(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+ struct kvm_segment cs, ss;
+ u64 msr_data;
+
+ /* inject #UD if LOCK prefix is used */
+ if (c->lock_prefix)
+ return -1;
+
+ /* inject #GP if in real mode or paging is disabled */
+ if (ctxt->mode == X86EMUL_MODE_REAL ||
+ !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+
+ /* XXX sysenter/sysexit have not been tested in 64bit mode.
+ * Therefore, we inject an #UD.
+ */
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ return -1;
+
+ setup_syscalls_segments(ctxt, &cs, &ss);
+
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+ switch (ctxt->mode) {
+ case X86EMUL_MODE_PROT32:
+ if ((msr_data & 0xfffc) == 0x0) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+ break;
+ case X86EMUL_MODE_PROT64:
+ if (msr_data == 0x0) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+ break;
+ }
+
+ ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+ cs.selector = (u16)msr_data;
+ cs.selector &= ~SELECTOR_RPL_MASK;
+ ss.selector = cs.selector + 8;
+ ss.selector &= ~SELECTOR_RPL_MASK;
+ if (ctxt->mode == X86EMUL_MODE_PROT64
+ || is_long_mode(ctxt->vcpu)) {
+ cs.db = 0;
+ cs.l = 1;
+ }
+
+ kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+ kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
+ c->eip = msr_data;
+
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
+ c->regs[VCPU_REGS_RSP] = msr_data;
+
+ return 0;
+}
+
+static int
+emulate_sysexit(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+ struct kvm_segment cs, ss;
+ u64 msr_data;
+ int usermode;
+
+ /* inject #UD if LOCK prefix is used */
+ if (c->lock_prefix)
+ return -1;
+
+ /* inject #GP if in real mode or paging is disabled */
+ if (ctxt->mode == X86EMUL_MODE_REAL
+ || !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+
+ /* sysexit must be called from CPL 0 */
+ if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+
+ setup_syscalls_segments(ctxt, &cs, &ss);
+
+ if ((c->rex_prefix & 0x8) != 0x0)
+ usermode = X86EMUL_MODE_PROT64;
+ else
+ usermode = X86EMUL_MODE_PROT32;
+
+ cs.dpl = 3;
+ ss.dpl = 3;
+ kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+ switch (usermode) {
+ case X86EMUL_MODE_PROT32:
+ cs.selector = (u16)(msr_data + 16);
+ if ((msr_data & 0xfffc) == 0x0) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+ ss.selector = (u16)(msr_data + 24);
+ break;
+ case X86EMUL_MODE_PROT64:
+ cs.selector = (u16)(msr_data + 32);
+ if (msr_data == 0x0) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ return -1;
+ }
+ ss.selector = cs.selector + 8;
+ cs.db = 0;
+ cs.l = 1;
+ break;
+ }
+ cs.selector |= SELECTOR_RPL_MASK;
+ ss.selector |= SELECTOR_RPL_MASK;
+
+ kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+ kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+ c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
+ c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
+
+ return 0;
+}
+
+int
+x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+ unsigned long memop = 0;
+ u64 msr_data;
+ unsigned long saved_eip = 0;
+ struct decode_cache *c = &ctxt->decode;
+ unsigned int port;
+ int io_dir_in;
+ int rc = 0;
+
+ ctxt->interruptibility = 0;
+
+ /* Shadow copy of register state. Committed on successful emulation.
+ * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
+ * modify them.
+ */
+
+ memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+ saved_eip = c->eip;
+
+ if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
+ memop = c->modrm_ea;
+
+ if (c->rep_prefix && (c->d & String)) {
+ /* All REP prefixes have the same first termination condition */
+ if (c->regs[VCPU_REGS_RCX] == 0) {
+ kvm_rip_write(ctxt->vcpu, c->eip);
+ goto done;
+ }
+ /* The second termination condition only applies for REPE
+ * and REPNE. Test if the repeat string operation prefix is
+ * REPE/REPZ or REPNE/REPNZ and if it's the case it tests the
+ * corresponding termination condition according to:
+ * - if REPE/REPZ and ZF = 0 then done
+ * - if REPNE/REPNZ and ZF = 1 then done
+ */
+ if ((c->b == 0xa6) || (c->b == 0xa7) ||
+ (c->b == 0xae) || (c->b == 0xaf)) {
+ if ((c->rep_prefix == REPE_PREFIX) &&
+ ((ctxt->eflags & EFLG_ZF) == 0)) {
+ kvm_rip_write(ctxt->vcpu, c->eip);
+ goto done;
+ }
+ if ((c->rep_prefix == REPNE_PREFIX) &&
+ ((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
+ kvm_rip_write(ctxt->vcpu, c->eip);
+ goto done;
+ }
+ }
+ c->regs[VCPU_REGS_RCX]--;
+ c->eip = kvm_rip_read(ctxt->vcpu);
+ }
+
+ if (c->src.type == OP_MEM) {
+ c->src.ptr = (unsigned long *)memop;
+ c->src.val = 0;
+ rc = ops->read_emulated((unsigned long)c->src.ptr,
+ &c->src.val,
+ c->src.bytes,
+ ctxt->vcpu);
+ if (rc != 0)
+ goto done;
+ c->src.orig_val = c->src.val;
+ }
+
+ if ((c->d & DstMask) == ImplicitOps)
+ goto special_insn;
+
+
+ if (c->dst.type == OP_MEM) {
+ c->dst.ptr = (unsigned long *)memop;
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->dst.val = 0;
+ if (c->d & BitOp) {
+ unsigned long mask = ~(c->dst.bytes * 8 - 1);
+
+ c->dst.ptr = (void *)c->dst.ptr +
+ (c->src.val & mask) / 8;
+ }
+ if (!(c->d & Mov) &&
+ /* optimisation - avoid slow emulated read */
+ ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
+ &c->dst.val,
+ c->dst.bytes, ctxt->vcpu)) != 0))
+ goto done;
+ }
+ c->dst.orig_val = c->dst.val;
+
+special_insn:
+
+ if (c->twobyte)
+ goto twobyte_insn;
+
+ switch (c->b) {
+ case 0x00 ... 0x05:
+ add: /* add */
+ emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x08 ... 0x0d:
+ or: /* or */
+ emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x10 ... 0x15:
+ adc: /* adc */
+ emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x18 ... 0x1d:
+ sbb: /* sbb */
+ emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x20 ... 0x25:
+ and: /* and */
+ emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x28 ... 0x2d:
+ sub: /* sub */
+ emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x30 ... 0x35:
+ xor: /* xor */
+ emulate_2op_SrcV("xor", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x38 ... 0x3d:
+ cmp: /* cmp */
+ emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x40 ... 0x47: /* inc r16/r32 */
+ emulate_1op("inc", c->dst, ctxt->eflags);
+ break;
+ case 0x48 ... 0x4f: /* dec r16/r32 */
+ emulate_1op("dec", c->dst, ctxt->eflags);
+ break;
+ case 0x50 ... 0x57: /* push reg */
+ emulate_push(ctxt);
+ break;
+ case 0x58 ... 0x5f: /* pop reg */
+ pop_instruction:
+ rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
+ if (rc != 0)
+ goto done;
+ break;
+ case 0x63: /* movsxd */
+ if (ctxt->mode != X86EMUL_MODE_PROT64)
+ goto cannot_emulate;
+ c->dst.val = (s32) c->src.val;
+ break;
+ case 0x68: /* push imm */
+ case 0x6a: /* push imm8 */
+ emulate_push(ctxt);
+ break;
+ case 0x6c: /* insb */
+ case 0x6d: /* insw/insd */
+ if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+ 1,
+ (c->d & ByteOp) ? 1 : c->op_bytes,
+ c->rep_prefix ?
+ address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
+ (ctxt->eflags & EFLG_DF),
+ register_address(c, es_base(ctxt),
+ c->regs[VCPU_REGS_RDI]),
+ c->rep_prefix,
+ c->regs[VCPU_REGS_RDX]) == 0) {
+ c->eip = saved_eip;
+ return -1;
+ }
+ return 0;
+ case 0x6e: /* outsb */
+ case 0x6f: /* outsw/outsd */
+ if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+ 0,
+ (c->d & ByteOp) ? 1 : c->op_bytes,
+ c->rep_prefix ?
+ address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
+ (ctxt->eflags & EFLG_DF),
+ register_address(c,
+ seg_override_base(ctxt, c),
+ c->regs[VCPU_REGS_RSI]),
+ c->rep_prefix,
+ c->regs[VCPU_REGS_RDX]) == 0) {
+ c->eip = saved_eip;
+ return -1;
+ }
+ return 0;
+ case 0x70 ... 0x7f: /* jcc (short) */
+ if (test_cc(c->b, ctxt->eflags))
+ jmp_rel(c, c->src.val);
+ break;
+ case 0x80 ... 0x83: /* Grp1 */
+ switch (c->modrm_reg) {
+ case 0:
+ goto add;
+ case 1:
+ goto or;
+ case 2:
+ goto adc;
+ case 3:
+ goto sbb;
+ case 4:
+ goto and;
+ case 5:
+ goto sub;
+ case 6:
+ goto xor;
+ case 7:
+ goto cmp;
+ }
+ break;
+ case 0x84 ... 0x85:
+ emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0x86 ... 0x87: /* xchg */
+ xchg:
+ /* Write back the register source. */
+ switch (c->dst.bytes) {
+ case 1:
+ *(u8 *) c->src.ptr = (u8) c->dst.val;
+ break;
+ case 2:
+ *(u16 *) c->src.ptr = (u16) c->dst.val;
+ break;
+ case 4:
+ *c->src.ptr = (u32) c->dst.val;
+ break; /* 64b reg: zero-extend */
+ case 8:
+ *c->src.ptr = c->dst.val;
+ break;
+ }
+ /*
+ * Write back the memory destination with implicit LOCK
+ * prefix.
+ */
+ c->dst.val = c->src.val;
+ c->lock_prefix = 1;
+ break;
+ case 0x88 ... 0x8b: /* mov */
+ goto mov;
+ case 0x8c: { /* mov r/m, sreg */
+ struct kvm_segment segreg;
+
+ if (c->modrm_reg <= 5)
+ kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+ else {
+ printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+ c->modrm);
+ goto cannot_emulate;
+ }
+ c->dst.val = segreg.selector;
+ break;
+ }
+ case 0x8d: /* lea r16/r32, m */
+ c->dst.val = c->modrm_ea;
+ break;
+ case 0x8e: { /* mov seg, r/m16 */
+ uint16_t sel;
+ int type_bits;
+ int err;
+
+ sel = c->src.val;
+ if (c->modrm_reg == VCPU_SREG_SS)
+ toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
+
+ if (c->modrm_reg <= 5) {
+ type_bits = (c->modrm_reg == 1) ? 9 : 1;
+ err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+ type_bits, c->modrm_reg);
+ } else {
+ printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+ c->modrm);
+ goto cannot_emulate;
+ }
+
+ if (err < 0)
+ goto cannot_emulate;
+
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ }
+ case 0x8f: /* pop (sole member of Grp1a) */
+ rc = emulate_grp1a(ctxt, ops);
+ if (rc != 0)
+ goto done;
+ break;
+ case 0x90: /* nop / xchg r8,rax */
+ if (!(c->rex_prefix & 1)) { /* nop */
+ c->dst.type = OP_NONE;
+ break;
+ }
+ case 0x91 ... 0x97: /* xchg reg,rax */
+ c->src.type = c->dst.type = OP_REG;
+ c->src.bytes = c->dst.bytes = c->op_bytes;
+ c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+ c->src.val = *(c->src.ptr);
+ goto xchg;
+ case 0x9c: /* pushf */
+ c->src.val = (unsigned long) ctxt->eflags;
+ emulate_push(ctxt);
+ break;
+ case 0x9d: /* popf */
+ c->dst.type = OP_REG;
+ c->dst.ptr = (unsigned long *) &ctxt->eflags;
+ c->dst.bytes = c->op_bytes;
+ goto pop_instruction;
+ case 0xa0 ... 0xa1: /* mov */
+ c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+ c->dst.val = c->src.val;
+ break;
+ case 0xa2 ... 0xa3: /* mov */
+ c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
+ break;
+ case 0xa4 ... 0xa5: /* movs */
+ c->dst.type = OP_MEM;
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->dst.ptr = (unsigned long *)register_address(c,
+ es_base(ctxt),
+ c->regs[VCPU_REGS_RDI]);
+ if ((rc = ops->read_emulated(register_address(c,
+ seg_override_base(ctxt, c),
+ c->regs[VCPU_REGS_RSI]),
+ &c->dst.val,
+ c->dst.bytes, ctxt->vcpu)) != 0)
+ goto done;
+ register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+ (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+ : c->dst.bytes);
+ register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+ (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+ : c->dst.bytes);
+ break;
+ case 0xa6 ... 0xa7: /* cmps */
+ c->src.type = OP_NONE; /* Disable writeback. */
+ c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->src.ptr = (unsigned long *)register_address(c,
+ seg_override_base(ctxt, c),
+ c->regs[VCPU_REGS_RSI]);
+ if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
+ &c->src.val,
+ c->src.bytes,
+ ctxt->vcpu)) != 0)
+ goto done;
+
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->dst.ptr = (unsigned long *)register_address(c,
+ es_base(ctxt),
+ c->regs[VCPU_REGS_RDI]);
+ if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
+ &c->dst.val,
+ c->dst.bytes,
+ ctxt->vcpu)) != 0)
+ goto done;
+
+ DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
+
+ emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+
+ register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+ (ctxt->eflags & EFLG_DF) ? -c->src.bytes
+ : c->src.bytes);
+ register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+ (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+ : c->dst.bytes);
+
+ break;
+ case 0xaa ... 0xab: /* stos */
+ c->dst.type = OP_MEM;
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->dst.ptr = (unsigned long *)register_address(c,
+ es_base(ctxt),
+ c->regs[VCPU_REGS_RDI]);
+ c->dst.val = c->regs[VCPU_REGS_RAX];
+ register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+ (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+ : c->dst.bytes);
+ break;
+ case 0xac ... 0xad: /* lods */
+ c->dst.type = OP_REG;
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+ if ((rc = ops->read_emulated(register_address(c,
+ seg_override_base(ctxt, c),
+ c->regs[VCPU_REGS_RSI]),
+ &c->dst.val,
+ c->dst.bytes,
+ ctxt->vcpu)) != 0)
+ goto done;
+ register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+ (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+ : c->dst.bytes);
+ break;
+ case 0xae ... 0xaf: /* scas */
+ DPRINTF("Urk! I don't handle SCAS.\n");
+ goto cannot_emulate;
+ case 0xb0 ... 0xbf: /* mov r, imm */
+ goto mov;
+ case 0xc0 ... 0xc1:
+ emulate_grp2(ctxt);
+ break;
+ case 0xc3: /* ret */
+ c->dst.type = OP_REG;
+ c->dst.ptr = &c->eip;
+ c->dst.bytes = c->op_bytes;
+ goto pop_instruction;
+ case 0xc6 ... 0xc7: /* mov (sole member of Grp11) */
+ mov:
+ c->dst.val = c->src.val;
+ break;
+ case 0xcb: /* ret far */
+ rc = emulate_ret_far(ctxt, ops);
+ if (rc)
+ goto done;
+ break;
+ case 0xd0 ... 0xd1: /* Grp2 */
+ c->src.val = 1;
+ emulate_grp2(ctxt);
+ break;
+ case 0xd2 ... 0xd3: /* Grp2 */
+ c->src.val = c->regs[VCPU_REGS_RCX];
+ emulate_grp2(ctxt);
+ break;
+ case 0xe4: /* inb */
+ case 0xe5: /* in */
+ port = c->src.val;
+ io_dir_in = 1;
+ goto do_io;
+ case 0xe6: /* outb */
+ case 0xe7: /* out */
+ port = c->src.val;
+ io_dir_in = 0;
+ goto do_io;
+ case 0xe8: /* call (near) */ {
+ long int rel = c->src.val;
+ c->src.val = (unsigned long) c->eip;
+ jmp_rel(c, rel);
+ emulate_push(ctxt);
+ break;
+ }
+ case 0xe9: /* jmp rel */
+ goto jmp;
+ case 0xea: /* jmp far */
+ if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
+ VCPU_SREG_CS) < 0) {
+ DPRINTF("jmp far: Failed to load CS descriptor\n");
+ goto cannot_emulate;
+ }
+
+ c->eip = c->src.val;
+ break;
+ case 0xeb:
+ jmp: /* jmp rel short */
+ jmp_rel(c, c->src.val);
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xec: /* in al,dx */
+ case 0xed: /* in (e/r)ax,dx */
+ port = c->regs[VCPU_REGS_RDX];
+ io_dir_in = 1;
+ goto do_io;
+ case 0xee: /* out al,dx */
+ case 0xef: /* out (e/r)ax,dx */
+ port = c->regs[VCPU_REGS_RDX];
+ io_dir_in = 0;
+ do_io: if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
+ (c->d & ByteOp) ? 1 : c->op_bytes,
+ port) != 0) {
+ c->eip = saved_eip;
+ goto cannot_emulate;
+ }
+ break;
+ case 0xf4: /* hlt */
+ ctxt->vcpu->arch.halt_request = 1;
+ break;
+ case 0xf5: /* cmc */
+ /* complement carry flag from eflags reg */
+ ctxt->eflags ^= EFLG_CF;
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xf6 ... 0xf7: /* Grp3 */
+ rc = emulate_grp3(ctxt, ops);
+ if (rc != 0)
+ goto done;
+ break;
+ case 0xf8: /* clc */
+ ctxt->eflags &= ~EFLG_CF;
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xfa: /* cli */
+ ctxt->eflags &= ~X86_EFLAGS_IF;
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xfb: /* sti */
+ toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
+ ctxt->eflags |= X86_EFLAGS_IF;
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xfc: /* cld */
+ ctxt->eflags &= ~EFLG_DF;
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xfd: /* std */
+ ctxt->eflags |= EFLG_DF;
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ break;
+ case 0xfe ... 0xff: /* Grp4/Grp5 */
+ rc = emulate_grp45(ctxt, ops);
+ if (rc != 0)
+ goto done;
+ break;
+ }
+
+writeback:
+ rc = writeback(ctxt, ops);
+ if (rc != 0)
+ goto done;
+
+ /* Commit shadow register state. */
+ memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
+ kvm_rip_write(ctxt->vcpu, c->eip);
+
+done:
+ if (rc == X86EMUL_UNHANDLEABLE) {
+ c->eip = saved_eip;
+ return -1;
+ }
+ return 0;
+
+twobyte_insn:
+ switch (c->b) {
+ case 0x01: /* lgdt, lidt, lmsw */
+ switch (c->modrm_reg) {
+ u16 size;
+ unsigned long address;
+
+ case 0: /* vmcall */
+ if (c->modrm_mod != 3 || c->modrm_rm != 1)
+ goto cannot_emulate;
+
+ rc = kvm_fix_hypercall(ctxt->vcpu);
+ if (rc)
+ goto done;
+
+ /* Let the processor re-execute the fixed hypercall */
+ c->eip = kvm_rip_read(ctxt->vcpu);
+ /* Disable writeback. */
+ c->dst.type = OP_NONE;
+ break;
+ case 2: /* lgdt */
+ rc = read_descriptor(ctxt, ops, c->src.ptr,
+ &size, &address, c->op_bytes);
+ if (rc)
+ goto done;
+ realmode_lgdt(ctxt->vcpu, size, address);
+ /* Disable writeback. */
+ c->dst.type = OP_NONE;
+ break;
+ case 3: /* lidt/vmmcall */
+ if (c->modrm_mod == 3) {
+ switch (c->modrm_rm) {
+ case 1:
+ rc = kvm_fix_hypercall(ctxt->vcpu);
+ if (rc)
+ goto done;
+ break;
+ default:
+ goto cannot_emulate;
+ }
+ } else {
+ rc = read_descriptor(ctxt, ops, c->src.ptr,
+ &size, &address,
+ c->op_bytes);
+ if (rc)
+ goto done;
+ realmode_lidt(ctxt->vcpu, size, address);
+ }
+ /* Disable writeback. */
+ c->dst.type = OP_NONE;
+ break;
+ case 4: /* smsw */
+ c->dst.bytes = 2;
+ c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
+ break;
+ case 6: /* lmsw */
+ realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
+ &ctxt->eflags);
+ c->dst.type = OP_NONE;
+ break;
+ case 7: /* invlpg*/
+ emulate_invlpg(ctxt->vcpu, memop);
+ /* Disable writeback. */
+ c->dst.type = OP_NONE;
+ break;
+ default:
+ goto cannot_emulate;
+ }
+ break;
+ case 0x05: /* syscall */
+ if (emulate_syscall(ctxt) == -1)
+ goto cannot_emulate;
+ else
+ goto writeback;
+ break;
+ case 0x06:
+ emulate_clts(ctxt->vcpu);
+ c->dst.type = OP_NONE;
+ break;
+ case 0x08: /* invd */
+ case 0x09: /* wbinvd */
+ case 0x0d: /* GrpP (prefetch) */
+ case 0x18: /* Grp16 (prefetch/nop) */
+ c->dst.type = OP_NONE;
+ break;
+ case 0x20: /* mov cr, reg */
+ if (c->modrm_mod != 3)
+ goto cannot_emulate;
+ c->regs[c->modrm_rm] =
+ realmode_get_cr(ctxt->vcpu, c->modrm_reg);
+ c->dst.type = OP_NONE; /* no writeback */
+ break;
+ case 0x21: /* mov from dr to reg */
+ if (c->modrm_mod != 3)
+ goto cannot_emulate;
+ rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
+ if (rc)
+ goto cannot_emulate;
+ c->dst.type = OP_NONE; /* no writeback */
+ break;
+ case 0x22: /* mov reg, cr */
+ if (c->modrm_mod != 3)
+ goto cannot_emulate;
+ realmode_set_cr(ctxt->vcpu,
+ c->modrm_reg, c->modrm_val, &ctxt->eflags);
+ c->dst.type = OP_NONE;
+ break;
+ case 0x23: /* mov from reg to dr */
+ if (c->modrm_mod != 3)
+ goto cannot_emulate;
+ rc = emulator_set_dr(ctxt, c->modrm_reg,
+ c->regs[c->modrm_rm]);
+ if (rc)
+ goto cannot_emulate;
+ c->dst.type = OP_NONE; /* no writeback */
+ break;
+ case 0x30:
+ /* wrmsr */
+ msr_data = (u32)c->regs[VCPU_REGS_RAX]
+ | ((u64)c->regs[VCPU_REGS_RDX] << 32);
+ rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
+ if (rc) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ c->eip = kvm_rip_read(ctxt->vcpu);
+ }
+ rc = X86EMUL_CONTINUE;
+ c->dst.type = OP_NONE;
+ break;
+ case 0x32:
+ /* rdmsr */
+ rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
+ if (rc) {
+ kvm_inject_gp(ctxt->vcpu, 0);
+ c->eip = kvm_rip_read(ctxt->vcpu);
+ } else {
+ c->regs[VCPU_REGS_RAX] = (u32)msr_data;
+ c->regs[VCPU_REGS_RDX] = msr_data >> 32;
+ }
+ rc = X86EMUL_CONTINUE;
+ c->dst.type = OP_NONE;
+ break;
+ case 0x34: /* sysenter */
+ if (emulate_sysenter(ctxt) == -1)
+ goto cannot_emulate;
+ else
+ goto writeback;
+ break;
+ case 0x35: /* sysexit */
+ if (emulate_sysexit(ctxt) == -1)
+ goto cannot_emulate;
+ else
+ goto writeback;
+ break;
+ case 0x40 ... 0x4f: /* cmov */
+ c->dst.val = c->dst.orig_val = c->src.val;
+ if (!test_cc(c->b, ctxt->eflags))
+ c->dst.type = OP_NONE; /* no writeback */
+ break;
+ case 0x80 ... 0x8f: /* jnz rel, etc*/
+ if (test_cc(c->b, ctxt->eflags))
+ jmp_rel(c, c->src.val);
+ c->dst.type = OP_NONE;
+ break;
+ case 0xa3:
+ bt: /* bt */
+ c->dst.type = OP_NONE;
+ /* only subword offset */
+ c->src.val &= (c->dst.bytes << 3) - 1;
+ emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0xa4: /* shld imm8, r, r/m */
+ case 0xa5: /* shld cl, r, r/m */
+ emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
+ break;
+ case 0xab:
+ bts: /* bts */
+ /* only subword offset */
+ c->src.val &= (c->dst.bytes << 3) - 1;
+ emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0xac: /* shrd imm8, r, r/m */
+ case 0xad: /* shrd cl, r, r/m */
+ emulate_2op_cl("shrd", c->src2, c->src, c->dst, ctxt->eflags);
+ break;
+ case 0xae: /* clflush */
+ break;
+ case 0xb0 ... 0xb1: /* cmpxchg */
+ /*
+ * Save real source value, then compare EAX against
+ * destination.
+ */
+ c->src.orig_val = c->src.val;
+ c->src.val = c->regs[VCPU_REGS_RAX];
+ emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+ if (ctxt->eflags & EFLG_ZF) {
+ /* Success: write back to memory. */
+ c->dst.val = c->src.orig_val;
+ } else {
+ /* Failure: write the value we saw to EAX. */
+ c->dst.type = OP_REG;
+ c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+ }
+ break;
+ case 0xb3:
+ btr: /* btr */
+ /* only subword offset */
+ c->src.val &= (c->dst.bytes << 3) - 1;
+ emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0xb6 ... 0xb7: /* movzx */
+ c->dst.bytes = c->op_bytes;
+ c->dst.val = (c->d & ByteOp) ? (u8) c->src.val
+ : (u16) c->src.val;
+ break;
+ case 0xba: /* Grp8 */
+ switch (c->modrm_reg & 3) {
+ case 0:
+ goto bt;
+ case 1:
+ goto bts;
+ case 2:
+ goto btr;
+ case 3:
+ goto btc;
+ }
+ break;
+ case 0xbb:
+ btc: /* btc */
+ /* only subword offset */
+ c->src.val &= (c->dst.bytes << 3) - 1;
+ emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
+ break;
+ case 0xbe ... 0xbf: /* movsx */
+ c->dst.bytes = c->op_bytes;
+ c->dst.val = (c->d & ByteOp) ? (s8) c->src.val :
+ (s16) c->src.val;
+ break;
+ case 0xc3: /* movnti */
+ c->dst.bytes = c->op_bytes;
+ c->dst.val = (c->op_bytes == 4) ? (u32) c->src.val :
+ (u64) c->src.val;
+ break;
+ case 0xc7: /* Grp9 (cmpxchg8b) */
+ rc = emulate_grp9(ctxt, ops, memop);
+ if (rc != 0)
+ goto done;
+ c->dst.type = OP_NONE;
+ break;
+ }
+ goto writeback;
+
+cannot_emulate:
+ DPRINTF("Cannot emulate %02x\n", c->b);
+ c->eip = saved_eip;
+ return -1;
+}
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 21f68e0..82ad523 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -231,7 +231,7 @@
{
struct kvm_pit *pit = vcpu->kvm->arch.vpit;
- if (pit && vcpu->vcpu_id == 0 && pit->pit_state.irq_ack)
+ if (pit && kvm_vcpu_is_bsp(vcpu) && pit->pit_state.irq_ack)
return atomic_read(&pit->pit_state.pit_timer.pending);
return 0;
}
@@ -252,7 +252,7 @@
struct kvm_pit *pit = vcpu->kvm->arch.vpit;
struct hrtimer *timer;
- if (vcpu->vcpu_id != 0 || !pit)
+ if (!kvm_vcpu_is_bsp(vcpu) || !pit)
return;
timer = &pit->pit_state.pit_timer.timer;
@@ -294,7 +294,7 @@
pt->timer.function = kvm_timer_fn;
pt->t_ops = &kpit_ops;
pt->kvm = ps->pit->kvm;
- pt->vcpu_id = 0;
+ pt->vcpu = pt->kvm->bsp_vcpu;
atomic_set(&pt->pending, 0);
ps->irq_ack = 1;
@@ -332,33 +332,62 @@
case 1:
/* FIXME: enhance mode 4 precision */
case 4:
- create_pit_timer(ps, val, 0);
+ if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) {
+ create_pit_timer(ps, val, 0);
+ }
break;
case 2:
case 3:
- create_pit_timer(ps, val, 1);
+ if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){
+ create_pit_timer(ps, val, 1);
+ }
break;
default:
destroy_pit_timer(&ps->pit_timer);
}
}
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
+void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start)
{
- mutex_lock(&kvm->arch.vpit->pit_state.lock);
- pit_load_count(kvm, channel, val);
- mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+ u8 saved_mode;
+ if (hpet_legacy_start) {
+ /* save existing mode for later reenablement */
+ saved_mode = kvm->arch.vpit->pit_state.channels[0].mode;
+ kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */
+ pit_load_count(kvm, channel, val);
+ kvm->arch.vpit->pit_state.channels[0].mode = saved_mode;
+ } else {
+ pit_load_count(kvm, channel, val);
+ }
}
-static void pit_ioport_write(struct kvm_io_device *this,
- gpa_t addr, int len, const void *data)
+static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
{
- struct kvm_pit *pit = (struct kvm_pit *)this->private;
+ return container_of(dev, struct kvm_pit, dev);
+}
+
+static inline struct kvm_pit *speaker_to_pit(struct kvm_io_device *dev)
+{
+ return container_of(dev, struct kvm_pit, speaker_dev);
+}
+
+static inline int pit_in_range(gpa_t addr)
+{
+ return ((addr >= KVM_PIT_BASE_ADDRESS) &&
+ (addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
+}
+
+static int pit_ioport_write(struct kvm_io_device *this,
+ gpa_t addr, int len, const void *data)
+{
+ struct kvm_pit *pit = dev_to_pit(this);
struct kvm_kpit_state *pit_state = &pit->pit_state;
struct kvm *kvm = pit->kvm;
int channel, access;
struct kvm_kpit_channel_state *s;
u32 val = *(u32 *) data;
+ if (!pit_in_range(addr))
+ return -EOPNOTSUPP;
val &= 0xff;
addr &= KVM_PIT_CHANNEL_MASK;
@@ -421,16 +450,19 @@
}
mutex_unlock(&pit_state->lock);
+ return 0;
}
-static void pit_ioport_read(struct kvm_io_device *this,
- gpa_t addr, int len, void *data)
+static int pit_ioport_read(struct kvm_io_device *this,
+ gpa_t addr, int len, void *data)
{
- struct kvm_pit *pit = (struct kvm_pit *)this->private;
+ struct kvm_pit *pit = dev_to_pit(this);
struct kvm_kpit_state *pit_state = &pit->pit_state;
struct kvm *kvm = pit->kvm;
int ret, count;
struct kvm_kpit_channel_state *s;
+ if (!pit_in_range(addr))
+ return -EOPNOTSUPP;
addr &= KVM_PIT_CHANNEL_MASK;
s = &pit_state->channels[addr];
@@ -485,37 +517,36 @@
memcpy(data, (char *)&ret, len);
mutex_unlock(&pit_state->lock);
+ return 0;
}
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
- int len, int is_write)
+static int speaker_ioport_write(struct kvm_io_device *this,
+ gpa_t addr, int len, const void *data)
{
- return ((addr >= KVM_PIT_BASE_ADDRESS) &&
- (addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
-}
-
-static void speaker_ioport_write(struct kvm_io_device *this,
- gpa_t addr, int len, const void *data)
-{
- struct kvm_pit *pit = (struct kvm_pit *)this->private;
+ struct kvm_pit *pit = speaker_to_pit(this);
struct kvm_kpit_state *pit_state = &pit->pit_state;
struct kvm *kvm = pit->kvm;
u32 val = *(u32 *) data;
+ if (addr != KVM_SPEAKER_BASE_ADDRESS)
+ return -EOPNOTSUPP;
mutex_lock(&pit_state->lock);
pit_state->speaker_data_on = (val >> 1) & 1;
pit_set_gate(kvm, 2, val & 1);
mutex_unlock(&pit_state->lock);
+ return 0;
}
-static void speaker_ioport_read(struct kvm_io_device *this,
- gpa_t addr, int len, void *data)
+static int speaker_ioport_read(struct kvm_io_device *this,
+ gpa_t addr, int len, void *data)
{
- struct kvm_pit *pit = (struct kvm_pit *)this->private;
+ struct kvm_pit *pit = speaker_to_pit(this);
struct kvm_kpit_state *pit_state = &pit->pit_state;
struct kvm *kvm = pit->kvm;
unsigned int refresh_clock;
int ret;
+ if (addr != KVM_SPEAKER_BASE_ADDRESS)
+ return -EOPNOTSUPP;
/* Refresh clock toggles at about 15us. We approximate as 2^14ns. */
refresh_clock = ((unsigned int)ktime_to_ns(ktime_get()) >> 14) & 1;
@@ -527,12 +558,7 @@
len = sizeof(ret);
memcpy(data, (char *)&ret, len);
mutex_unlock(&pit_state->lock);
-}
-
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
- int len, int is_write)
-{
- return (addr == KVM_SPEAKER_BASE_ADDRESS);
+ return 0;
}
void kvm_pit_reset(struct kvm_pit *pit)
@@ -541,6 +567,7 @@
struct kvm_kpit_channel_state *c;
mutex_lock(&pit->pit_state.lock);
+ pit->pit_state.flags = 0;
for (i = 0; i < 3; i++) {
c = &pit->pit_state.channels[i];
c->mode = 0xff;
@@ -563,10 +590,22 @@
}
}
-struct kvm_pit *kvm_create_pit(struct kvm *kvm)
+static const struct kvm_io_device_ops pit_dev_ops = {
+ .read = pit_ioport_read,
+ .write = pit_ioport_write,
+};
+
+static const struct kvm_io_device_ops speaker_dev_ops = {
+ .read = speaker_ioport_read,
+ .write = speaker_ioport_write,
+};
+
+/* Caller must have writers lock on slots_lock */
+struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
{
struct kvm_pit *pit;
struct kvm_kpit_state *pit_state;
+ int ret;
pit = kzalloc(sizeof(struct kvm_pit), GFP_KERNEL);
if (!pit)
@@ -582,19 +621,6 @@
mutex_lock(&pit->pit_state.lock);
spin_lock_init(&pit->pit_state.inject_lock);
- /* Initialize PIO device */
- pit->dev.read = pit_ioport_read;
- pit->dev.write = pit_ioport_write;
- pit->dev.in_range = pit_in_range;
- pit->dev.private = pit;
- kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
-
- pit->speaker_dev.read = speaker_ioport_read;
- pit->speaker_dev.write = speaker_ioport_write;
- pit->speaker_dev.in_range = speaker_in_range;
- pit->speaker_dev.private = pit;
- kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
-
kvm->arch.vpit = pit;
pit->kvm = kvm;
@@ -613,7 +639,30 @@
pit->mask_notifier.func = pit_mask_notifer;
kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
+ kvm_iodevice_init(&pit->dev, &pit_dev_ops);
+ ret = __kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+ if (ret < 0)
+ goto fail;
+
+ if (flags & KVM_PIT_SPEAKER_DUMMY) {
+ kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
+ ret = __kvm_io_bus_register_dev(&kvm->pio_bus,
+ &pit->speaker_dev);
+ if (ret < 0)
+ goto fail_unregister;
+ }
+
return pit;
+
+fail_unregister:
+ __kvm_io_bus_unregister_dev(&kvm->pio_bus, &pit->dev);
+
+fail:
+ if (pit->irq_source_id >= 0)
+ kvm_free_irq_source_id(kvm, pit->irq_source_id);
+
+ kfree(pit);
+ return NULL;
}
void kvm_free_pit(struct kvm *kvm)
@@ -623,6 +672,8 @@
if (kvm->arch.vpit) {
kvm_unregister_irq_mask_notifier(kvm, 0,
&kvm->arch.vpit->mask_notifier);
+ kvm_unregister_irq_ack_notifier(kvm,
+ &kvm->arch.vpit->pit_state.irq_ack_notifier);
mutex_lock(&kvm->arch.vpit->pit_state.lock);
timer = &kvm->arch.vpit->pit_state.pit_timer.timer;
hrtimer_cancel(timer);
@@ -637,10 +688,10 @@
struct kvm_vcpu *vcpu;
int i;
- mutex_lock(&kvm->lock);
+ mutex_lock(&kvm->irq_lock);
kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
- mutex_unlock(&kvm->lock);
+ mutex_unlock(&kvm->irq_lock);
/*
* Provides NMI watchdog support via Virtual Wire mode.
@@ -652,11 +703,8 @@
* VCPU0, and only if its LVT0 is in EXTINT mode.
*/
if (kvm->arch.vapics_in_nmi_mode > 0)
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- vcpu = kvm->vcpus[i];
- if (vcpu)
- kvm_apic_nmi_wd_deliver(vcpu);
- }
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ kvm_apic_nmi_wd_deliver(vcpu);
}
void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
@@ -665,7 +713,7 @@
struct kvm *kvm = vcpu->kvm;
struct kvm_kpit_state *ps;
- if (vcpu && pit) {
+ if (pit) {
int inject = 0;
ps = &pit->pit_state;
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index bbd863f..d4c1c7f 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -21,6 +21,7 @@
struct kvm_kpit_state {
struct kvm_kpit_channel_state channels[3];
+ u32 flags;
struct kvm_timer pit_timer;
bool is_periodic;
u32 speaker_data_on;
@@ -49,8 +50,8 @@
#define KVM_PIT_CHANNEL_MASK 0x3
void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu);
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val);
-struct kvm_pit *kvm_create_pit(struct kvm *kvm);
+void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start);
+struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags);
void kvm_free_pit(struct kvm *kvm);
void kvm_pit_reset(struct kvm_pit *pit);
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1ccb50c..01f1516 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -30,50 +30,24 @@
#include "irq.h"
#include <linux/kvm_host.h>
-
-static void pic_lock(struct kvm_pic *s)
- __acquires(&s->lock)
-{
- spin_lock(&s->lock);
-}
-
-static void pic_unlock(struct kvm_pic *s)
- __releases(&s->lock)
-{
- struct kvm *kvm = s->kvm;
- unsigned acks = s->pending_acks;
- bool wakeup = s->wakeup_needed;
- struct kvm_vcpu *vcpu;
-
- s->pending_acks = 0;
- s->wakeup_needed = false;
-
- spin_unlock(&s->lock);
-
- while (acks) {
- kvm_notify_acked_irq(kvm, SELECT_PIC(__ffs(acks)),
- __ffs(acks));
- acks &= acks - 1;
- }
-
- if (wakeup) {
- vcpu = s->kvm->vcpus[0];
- if (vcpu)
- kvm_vcpu_kick(vcpu);
- }
-}
+#include "trace.h"
static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
{
s->isr &= ~(1 << irq);
s->isr_ack |= (1 << irq);
+ if (s != &s->pics_state->pics[0])
+ irq += 8;
+ kvm_notify_acked_irq(s->pics_state->kvm, SELECT_PIC(irq), irq);
}
void kvm_pic_clear_isr_ack(struct kvm *kvm)
{
struct kvm_pic *s = pic_irqchip(kvm);
+ spin_lock(&s->lock);
s->pics[0].isr_ack = 0xff;
s->pics[1].isr_ack = 0xff;
+ spin_unlock(&s->lock);
}
/*
@@ -174,9 +148,9 @@
void kvm_pic_update_irq(struct kvm_pic *s)
{
- pic_lock(s);
+ spin_lock(&s->lock);
pic_update_irq(s);
- pic_unlock(s);
+ spin_unlock(&s->lock);
}
int kvm_pic_set_irq(void *opaque, int irq, int level)
@@ -184,12 +158,14 @@
struct kvm_pic *s = opaque;
int ret = -1;
- pic_lock(s);
+ spin_lock(&s->lock);
if (irq >= 0 && irq < PIC_NUM_PINS) {
ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
pic_update_irq(s);
+ trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
+ s->pics[irq >> 3].imr, ret == 0);
}
- pic_unlock(s);
+ spin_unlock(&s->lock);
return ret;
}
@@ -217,7 +193,7 @@
int irq, irq2, intno;
struct kvm_pic *s = pic_irqchip(kvm);
- pic_lock(s);
+ spin_lock(&s->lock);
irq = pic_get_irq(&s->pics[0]);
if (irq >= 0) {
pic_intack(&s->pics[0], irq);
@@ -242,8 +218,7 @@
intno = s->pics[0].irq_base + irq;
}
pic_update_irq(s);
- pic_unlock(s);
- kvm_notify_acked_irq(kvm, SELECT_PIC(irq), irq);
+ spin_unlock(&s->lock);
return intno;
}
@@ -252,7 +227,7 @@
{
int irq, irqbase, n;
struct kvm *kvm = s->pics_state->irq_request_opaque;
- struct kvm_vcpu *vcpu0 = kvm->vcpus[0];
+ struct kvm_vcpu *vcpu0 = kvm->bsp_vcpu;
if (s == &s->pics_state->pics[0])
irqbase = 0;
@@ -263,7 +238,7 @@
if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
if (s->irr & (1 << irq) || s->isr & (1 << irq)) {
n = irq + irqbase;
- s->pics_state->pending_acks |= 1 << n;
+ kvm_notify_acked_irq(kvm, SELECT_PIC(n), n);
}
}
s->last_irr = 0;
@@ -428,8 +403,7 @@
return s->elcr;
}
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
- int len, int is_write)
+static int picdev_in_range(gpa_t addr)
{
switch (addr) {
case 0x20:
@@ -444,18 +418,25 @@
}
}
-static void picdev_write(struct kvm_io_device *this,
+static inline struct kvm_pic *to_pic(struct kvm_io_device *dev)
+{
+ return container_of(dev, struct kvm_pic, dev);
+}
+
+static int picdev_write(struct kvm_io_device *this,
gpa_t addr, int len, const void *val)
{
- struct kvm_pic *s = this->private;
+ struct kvm_pic *s = to_pic(this);
unsigned char data = *(unsigned char *)val;
+ if (!picdev_in_range(addr))
+ return -EOPNOTSUPP;
if (len != 1) {
if (printk_ratelimit())
printk(KERN_ERR "PIC: non byte write\n");
- return;
+ return 0;
}
- pic_lock(s);
+ spin_lock(&s->lock);
switch (addr) {
case 0x20:
case 0x21:
@@ -468,21 +449,24 @@
elcr_ioport_write(&s->pics[addr & 1], addr, data);
break;
}
- pic_unlock(s);
+ spin_unlock(&s->lock);
+ return 0;
}
-static void picdev_read(struct kvm_io_device *this,
- gpa_t addr, int len, void *val)
+static int picdev_read(struct kvm_io_device *this,
+ gpa_t addr, int len, void *val)
{
- struct kvm_pic *s = this->private;
+ struct kvm_pic *s = to_pic(this);
unsigned char data = 0;
+ if (!picdev_in_range(addr))
+ return -EOPNOTSUPP;
if (len != 1) {
if (printk_ratelimit())
printk(KERN_ERR "PIC: non byte read\n");
- return;
+ return 0;
}
- pic_lock(s);
+ spin_lock(&s->lock);
switch (addr) {
case 0x20:
case 0x21:
@@ -496,7 +480,8 @@
break;
}
*(unsigned char *)val = data;
- pic_unlock(s);
+ spin_unlock(&s->lock);
+ return 0;
}
/*
@@ -505,20 +490,27 @@
static void pic_irq_request(void *opaque, int level)
{
struct kvm *kvm = opaque;
- struct kvm_vcpu *vcpu = kvm->vcpus[0];
+ struct kvm_vcpu *vcpu = kvm->bsp_vcpu;
struct kvm_pic *s = pic_irqchip(kvm);
int irq = pic_get_irq(&s->pics[0]);
s->output = level;
if (vcpu && level && (s->pics[0].isr_ack & (1 << irq))) {
s->pics[0].isr_ack &= ~(1 << irq);
- s->wakeup_needed = true;
+ kvm_vcpu_kick(vcpu);
}
}
+static const struct kvm_io_device_ops picdev_ops = {
+ .read = picdev_read,
+ .write = picdev_write,
+};
+
struct kvm_pic *kvm_create_pic(struct kvm *kvm)
{
struct kvm_pic *s;
+ int ret;
+
s = kzalloc(sizeof(struct kvm_pic), GFP_KERNEL);
if (!s)
return NULL;
@@ -534,10 +526,12 @@
/*
* Initialize PIO device
*/
- s->dev.read = picdev_read;
- s->dev.write = picdev_write;
- s->dev.in_range = picdev_in_range;
- s->dev.private = s;
- kvm_io_bus_register_dev(&kvm->pio_bus, &s->dev);
+ kvm_iodevice_init(&s->dev, &picdev_ops);
+ ret = kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
+ if (ret < 0) {
+ kfree(s);
+ return NULL;
+ }
+
return s;
}
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 9f59318..7d6058a 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -63,7 +63,6 @@
struct kvm_pic {
spinlock_t lock;
- bool wakeup_needed;
unsigned pending_acks;
struct kvm *kvm;
struct kvm_kpic_state pics[2]; /* 0 is master pic, 1 is slave pic */
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index 1ff819d..7bcc5b6 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -29,4 +29,13 @@
kvm_register_write(vcpu, VCPU_REGS_RIP, val);
}
+static inline u64 kvm_pdptr_read(struct kvm_vcpu *vcpu, int index)
+{
+ if (!test_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_avail))
+ kvm_x86_ops->cache_reg(vcpu, VCPU_EXREG_PDPTR);
+
+ return vcpu->arch.pdptrs[index];
+}
+
#endif
diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
deleted file mode 100644
index ed66e4c..0000000
--- a/arch/x86/kvm/kvm_svm.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef __KVM_SVM_H
-#define __KVM_SVM_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/kvm_host.h>
-#include <asm/msr.h>
-
-#include <asm/svm.h>
-
-static const u32 host_save_user_msrs[] = {
-#ifdef CONFIG_X86_64
- MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
- MSR_FS_BASE,
-#endif
- MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
-};
-
-#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
-
-struct kvm_vcpu;
-
-struct vcpu_svm {
- struct kvm_vcpu vcpu;
- struct vmcb *vmcb;
- unsigned long vmcb_pa;
- struct svm_cpu_data *svm_data;
- uint64_t asid_generation;
-
- u64 next_rip;
-
- u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
- u64 host_gs_base;
- unsigned long host_cr2;
-
- u32 *msrpm;
- struct vmcb *hsave;
- u64 hsave_msr;
-
- u64 nested_vmcb;
-
- /* These are the merged vectors */
- u32 *nested_msrpm;
-
- /* gpa pointers to the real vectors */
- u64 nested_vmcb_msrpm;
-};
-
-#endif
-
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
index 26bd6ba..55c7524 100644
--- a/arch/x86/kvm/kvm_timer.h
+++ b/arch/x86/kvm/kvm_timer.h
@@ -6,7 +6,7 @@
bool reinject;
struct kvm_timer_ops *t_ops;
struct kvm *kvm;
- int vcpu_id;
+ struct kvm_vcpu *vcpu;
};
struct kvm_timer_ops {
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ae99d83..1ae5ceb 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -32,8 +32,11 @@
#include <asm/current.h>
#include <asm/apicdef.h>
#include <asm/atomic.h>
+#include <asm/apicdef.h>
#include "kvm_cache_regs.h"
#include "irq.h"
+#include "trace.h"
+#include "x86.h"
#ifndef CONFIG_X86_64
#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -141,6 +144,26 @@
return (lvt_val & (APIC_MODE_MASK | APIC_LVT_MASKED)) == APIC_DM_NMI;
}
+void kvm_apic_set_version(struct kvm_vcpu *vcpu)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ struct kvm_cpuid_entry2 *feat;
+ u32 v = APIC_VERSION;
+
+ if (!irqchip_in_kernel(vcpu->kvm))
+ return;
+
+ feat = kvm_find_cpuid_entry(apic->vcpu, 0x1, 0);
+ if (feat && (feat->ecx & (1 << (X86_FEATURE_X2APIC & 31))))
+ v |= APIC_LVR_DIRECTED_EOI;
+ apic_set_reg(apic, APIC_LVR, v);
+}
+
+static inline int apic_x2apic_mode(struct kvm_lapic *apic)
+{
+ return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
+}
+
static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
LVT_MASK | APIC_LVT_TIMER_PERIODIC, /* LVTT */
LVT_MASK | APIC_MODE_MASK, /* LVTTHMR */
@@ -165,36 +188,52 @@
static inline int apic_test_and_set_irr(int vec, struct kvm_lapic *apic)
{
+ apic->irr_pending = true;
return apic_test_and_set_vector(vec, apic->regs + APIC_IRR);
}
-static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
+static inline int apic_search_irr(struct kvm_lapic *apic)
{
- apic_clear_vector(vec, apic->regs + APIC_IRR);
+ return find_highest_vector(apic->regs + APIC_IRR);
}
static inline int apic_find_highest_irr(struct kvm_lapic *apic)
{
int result;
- result = find_highest_vector(apic->regs + APIC_IRR);
+ if (!apic->irr_pending)
+ return -1;
+
+ result = apic_search_irr(apic);
ASSERT(result == -1 || result >= 16);
return result;
}
+static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
+{
+ apic->irr_pending = false;
+ apic_clear_vector(vec, apic->regs + APIC_IRR);
+ if (apic_search_irr(apic) != -1)
+ apic->irr_pending = true;
+}
+
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
int highest_irr;
+ /* This may race with setting of irr in __apic_accept_irq() and
+ * value returned may be wrong, but kvm_vcpu_kick() in __apic_accept_irq
+ * will cause vmexit immediately and the value will be recalculated
+ * on the next vmentry.
+ */
if (!apic)
return 0;
highest_irr = apic_find_highest_irr(apic);
return highest_irr;
}
-EXPORT_SYMBOL_GPL(kvm_lapic_find_highest_irr);
static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
int vector, int level, int trig_mode);
@@ -251,7 +290,12 @@
int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
{
int result = 0;
- u8 logical_id;
+ u32 logical_id;
+
+ if (apic_x2apic_mode(apic)) {
+ logical_id = apic_get_reg(apic, APIC_LDR);
+ return logical_id & mda;
+ }
logical_id = GET_APIC_LOGICAL_ID(apic_get_reg(apic, APIC_LDR));
@@ -331,6 +375,8 @@
break;
result = !apic_test_and_set_irr(vector, apic);
+ trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
+ trig_mode, vector, !result);
if (!result) {
if (trig_mode)
apic_debug("level trig mode repeatedly for "
@@ -425,7 +471,11 @@
trigger_mode = IOAPIC_LEVEL_TRIG;
else
trigger_mode = IOAPIC_EDGE_TRIG;
- kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
+ if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)) {
+ mutex_lock(&apic->vcpu->kvm->irq_lock);
+ kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
+ mutex_unlock(&apic->vcpu->kvm->irq_lock);
+ }
}
static void apic_send_ipi(struct kvm_lapic *apic)
@@ -440,7 +490,12 @@
irq.level = icr_low & APIC_INT_ASSERT;
irq.trig_mode = icr_low & APIC_INT_LEVELTRIG;
irq.shorthand = icr_low & APIC_SHORT_MASK;
- irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
+ if (apic_x2apic_mode(apic))
+ irq.dest_id = icr_high;
+ else
+ irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
+
+ trace_kvm_apic_ipi(icr_low, irq.dest_id);
apic_debug("icr_high 0x%x, icr_low 0x%x, "
"short_hand 0x%x, dest 0x%x, trig_mode 0x%x, level 0x%x, "
@@ -449,7 +504,9 @@
irq.trig_mode, irq.level, irq.dest_mode, irq.delivery_mode,
irq.vector);
+ mutex_lock(&apic->vcpu->kvm->irq_lock);
kvm_irq_delivery_to_apic(apic->vcpu->kvm, apic, &irq);
+ mutex_unlock(&apic->vcpu->kvm->irq_lock);
}
static u32 apic_get_tmcct(struct kvm_lapic *apic)
@@ -495,12 +552,16 @@
{
u32 val = 0;
- KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
-
if (offset >= LAPIC_MMIO_LENGTH)
return 0;
switch (offset) {
+ case APIC_ID:
+ if (apic_x2apic_mode(apic))
+ val = kvm_apic_id(apic);
+ else
+ val = kvm_apic_id(apic) << 24;
+ break;
case APIC_ARBPRI:
printk(KERN_WARNING "Access APIC ARBPRI register "
"which is for P6\n");
@@ -522,21 +583,35 @@
return val;
}
-static void apic_mmio_read(struct kvm_io_device *this,
- gpa_t address, int len, void *data)
+static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
{
- struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
- unsigned int offset = address - apic->base_address;
+ return container_of(dev, struct kvm_lapic, dev);
+}
+
+static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
+ void *data)
+{
unsigned char alignment = offset & 0xf;
u32 result;
+ /* this bitmask has a bit cleared for each reserver register */
+ static const u64 rmask = 0x43ff01ffffffe70cULL;
if ((alignment + len) > 4) {
- printk(KERN_ERR "KVM_APIC_READ: alignment error %lx %d",
- (unsigned long)address, len);
- return;
+ apic_debug("KVM_APIC_READ: alignment error %x %d\n",
+ offset, len);
+ return 1;
}
+
+ if (offset > 0x3f0 || !(rmask & (1ULL << (offset >> 4)))) {
+ apic_debug("KVM_APIC_READ: read reserved register %x\n",
+ offset);
+ return 1;
+ }
+
result = __apic_read(apic, offset & ~0xf);
+ trace_kvm_apic_read(offset, result);
+
switch (len) {
case 1:
case 2:
@@ -548,6 +623,28 @@
"should be 1,2, or 4 instead\n", len);
break;
}
+ return 0;
+}
+
+static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
+{
+ return apic_hw_enabled(apic) &&
+ addr >= apic->base_address &&
+ addr < apic->base_address + LAPIC_MMIO_LENGTH;
+}
+
+static int apic_mmio_read(struct kvm_io_device *this,
+ gpa_t address, int len, void *data)
+{
+ struct kvm_lapic *apic = to_lapic(this);
+ u32 offset = address - apic->base_address;
+
+ if (!apic_mmio_in_range(apic, address))
+ return -EOPNOTSUPP;
+
+ apic_reg_read(apic, offset, len, data);
+
+ return 0;
}
static void update_divide_count(struct kvm_lapic *apic)
@@ -573,6 +670,15 @@
if (!apic->lapic_timer.period)
return;
+ /*
+ * Do not allow the guest to program periodic timers with small
+ * interval, since the hrtimers are not throttled by the host
+ * scheduler.
+ */
+ if (apic_lvtt_period(apic)) {
+ if (apic->lapic_timer.period < NSEC_PER_MSEC/2)
+ apic->lapic_timer.period = NSEC_PER_MSEC/2;
+ }
hrtimer_start(&apic->lapic_timer.timer,
ktime_add_ns(now, apic->lapic_timer.period),
@@ -603,40 +709,18 @@
apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
}
-static void apic_mmio_write(struct kvm_io_device *this,
- gpa_t address, int len, const void *data)
+static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
{
- struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
- unsigned int offset = address - apic->base_address;
- unsigned char alignment = offset & 0xf;
- u32 val;
+ int ret = 0;
- /*
- * APIC register must be aligned on 128-bits boundary.
- * 32/64/128 bits registers must be accessed thru 32 bits.
- * Refer SDM 8.4.1
- */
- if (len != 4 || alignment) {
- /* Don't shout loud, $infamous_os would cause only noise. */
- apic_debug("apic write: bad size=%d %lx\n",
- len, (long)address);
- return;
- }
+ trace_kvm_apic_write(reg, val);
- val = *(u32 *) data;
-
- /* too common printing */
- if (offset != APIC_EOI)
- apic_debug("%s: offset 0x%x with length 0x%x, and value is "
- "0x%x\n", __func__, offset, len, val);
-
- offset &= 0xff0;
-
- KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
-
- switch (offset) {
+ switch (reg) {
case APIC_ID: /* Local APIC ID */
- apic_set_reg(apic, APIC_ID, val);
+ if (!apic_x2apic_mode(apic))
+ apic_set_reg(apic, APIC_ID, val);
+ else
+ ret = 1;
break;
case APIC_TASKPRI:
@@ -649,15 +733,24 @@
break;
case APIC_LDR:
- apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+ if (!apic_x2apic_mode(apic))
+ apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+ else
+ ret = 1;
break;
case APIC_DFR:
- apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
+ if (!apic_x2apic_mode(apic))
+ apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
+ else
+ ret = 1;
break;
- case APIC_SPIV:
- apic_set_reg(apic, APIC_SPIV, val & 0x3ff);
+ case APIC_SPIV: {
+ u32 mask = 0x3ff;
+ if (apic_get_reg(apic, APIC_LVR) & APIC_LVR_DIRECTED_EOI)
+ mask |= APIC_SPIV_DIRECTED_EOI;
+ apic_set_reg(apic, APIC_SPIV, val & mask);
if (!(val & APIC_SPIV_APIC_ENABLED)) {
int i;
u32 lvt_val;
@@ -672,7 +765,7 @@
}
break;
-
+ }
case APIC_ICR:
/* No delay here, so we always clear the pending bit */
apic_set_reg(apic, APIC_ICR, val & ~(1 << 12));
@@ -680,7 +773,9 @@
break;
case APIC_ICR2:
- apic_set_reg(apic, APIC_ICR2, val & 0xff000000);
+ if (!apic_x2apic_mode(apic))
+ val &= 0xff000000;
+ apic_set_reg(apic, APIC_ICR2, val);
break;
case APIC_LVT0:
@@ -694,8 +789,8 @@
if (!apic_sw_enabled(apic))
val |= APIC_LVT_MASKED;
- val &= apic_lvt_mask[(offset - APIC_LVTT) >> 4];
- apic_set_reg(apic, offset, val);
+ val &= apic_lvt_mask[(reg - APIC_LVTT) >> 4];
+ apic_set_reg(apic, reg, val);
break;
@@ -703,7 +798,7 @@
hrtimer_cancel(&apic->lapic_timer.timer);
apic_set_reg(apic, APIC_TMICT, val);
start_apic_timer(apic);
- return;
+ break;
case APIC_TDCR:
if (val & 4)
@@ -712,27 +807,59 @@
update_divide_count(apic);
break;
+ case APIC_ESR:
+ if (apic_x2apic_mode(apic) && val != 0) {
+ printk(KERN_ERR "KVM_WRITE:ESR not zero %x\n", val);
+ ret = 1;
+ }
+ break;
+
+ case APIC_SELF_IPI:
+ if (apic_x2apic_mode(apic)) {
+ apic_reg_write(apic, APIC_ICR, 0x40000 | (val & 0xff));
+ } else
+ ret = 1;
+ break;
default:
- apic_debug("Local APIC Write to read-only register %x\n",
- offset);
+ ret = 1;
break;
}
-
+ if (ret)
+ apic_debug("Local APIC Write to read-only register %x\n", reg);
+ return ret;
}
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
- int len, int size)
+static int apic_mmio_write(struct kvm_io_device *this,
+ gpa_t address, int len, const void *data)
{
- struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
- int ret = 0;
+ struct kvm_lapic *apic = to_lapic(this);
+ unsigned int offset = address - apic->base_address;
+ u32 val;
+ if (!apic_mmio_in_range(apic, address))
+ return -EOPNOTSUPP;
- if (apic_hw_enabled(apic) &&
- (addr >= apic->base_address) &&
- (addr < (apic->base_address + LAPIC_MMIO_LENGTH)))
- ret = 1;
+ /*
+ * APIC register must be aligned on 128-bits boundary.
+ * 32/64/128 bits registers must be accessed thru 32 bits.
+ * Refer SDM 8.4.1
+ */
+ if (len != 4 || (offset & 0xf)) {
+ /* Don't shout loud, $infamous_os would cause only noise. */
+ apic_debug("apic write: bad size=%d %lx\n", len, (long)address);
+ return 0;
+ }
- return ret;
+ val = *(u32*)data;
+
+ /* too common printing */
+ if (offset != APIC_EOI)
+ apic_debug("%s: offset 0x%x with length 0x%x, and value is "
+ "0x%x\n", __func__, offset, len, val);
+
+ apic_reg_write(apic, offset & 0xff0, val);
+
+ return 0;
}
void kvm_free_lapic(struct kvm_vcpu *vcpu)
@@ -763,7 +890,6 @@
apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
| (apic_get_reg(apic, APIC_TASKPRI) & 4));
}
-EXPORT_SYMBOL_GPL(kvm_lapic_set_tpr);
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
{
@@ -776,7 +902,6 @@
return (tpr & 0xf0) >> 4;
}
-EXPORT_SYMBOL_GPL(kvm_lapic_get_cr8);
void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
{
@@ -787,10 +912,16 @@
vcpu->arch.apic_base = value;
return;
}
- if (apic->vcpu->vcpu_id)
+
+ if (!kvm_vcpu_is_bsp(apic->vcpu))
value &= ~MSR_IA32_APICBASE_BSP;
vcpu->arch.apic_base = value;
+ if (apic_x2apic_mode(apic)) {
+ u32 id = kvm_apic_id(apic);
+ u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf));
+ apic_set_reg(apic, APIC_LDR, ldr);
+ }
apic->base_address = apic->vcpu->arch.apic_base &
MSR_IA32_APICBASE_BASE;
@@ -800,12 +931,6 @@
}
-u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu)
-{
- return vcpu->arch.apic_base;
-}
-EXPORT_SYMBOL_GPL(kvm_lapic_get_base);
-
void kvm_lapic_reset(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic;
@@ -821,7 +946,7 @@
hrtimer_cancel(&apic->lapic_timer.timer);
apic_set_reg(apic, APIC_ID, vcpu->vcpu_id << 24);
- apic_set_reg(apic, APIC_LVR, APIC_VERSION);
+ kvm_apic_set_version(apic->vcpu);
for (i = 0; i < APIC_LVT_NUM; i++)
apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
@@ -842,9 +967,10 @@
apic_set_reg(apic, APIC_ISR + 0x10 * i, 0);
apic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
}
+ apic->irr_pending = false;
update_divide_count(apic);
atomic_set(&apic->lapic_timer.pending, 0);
- if (vcpu->vcpu_id == 0)
+ if (kvm_vcpu_is_bsp(vcpu))
vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
apic_update_ppr(apic);
@@ -855,7 +981,6 @@
vcpu, kvm_apic_id(apic),
vcpu->arch.apic_base, apic->base_address);
}
-EXPORT_SYMBOL_GPL(kvm_lapic_reset);
bool kvm_apic_present(struct kvm_vcpu *vcpu)
{
@@ -866,7 +991,6 @@
{
return kvm_apic_present(vcpu) && apic_sw_enabled(vcpu->arch.apic);
}
-EXPORT_SYMBOL_GPL(kvm_lapic_enabled);
/*
*----------------------------------------------------------------------
@@ -917,6 +1041,11 @@
.is_periodic = lapic_is_periodic,
};
+static const struct kvm_io_device_ops apic_mmio_ops = {
+ .read = apic_mmio_read,
+ .write = apic_mmio_write,
+};
+
int kvm_create_lapic(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic;
@@ -945,16 +1074,13 @@
apic->lapic_timer.timer.function = kvm_timer_fn;
apic->lapic_timer.t_ops = &lapic_timer_ops;
apic->lapic_timer.kvm = vcpu->kvm;
- apic->lapic_timer.vcpu_id = vcpu->vcpu_id;
+ apic->lapic_timer.vcpu = vcpu;
apic->base_address = APIC_DEFAULT_PHYS_BASE;
vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
kvm_lapic_reset(vcpu);
- apic->dev.read = apic_mmio_read;
- apic->dev.write = apic_mmio_write;
- apic->dev.in_range = apic_mmio_range;
- apic->dev.private = apic;
+ kvm_iodevice_init(&apic->dev, &apic_mmio_ops);
return 0;
nomem_free_apic:
@@ -962,7 +1088,6 @@
nomem:
return -ENOMEM;
}
-EXPORT_SYMBOL_GPL(kvm_create_lapic);
int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu)
{
@@ -985,7 +1110,7 @@
u32 lvt0 = apic_get_reg(vcpu->arch.apic, APIC_LVT0);
int r = 0;
- if (vcpu->vcpu_id == 0) {
+ if (kvm_vcpu_is_bsp(vcpu)) {
if (!apic_hw_enabled(vcpu->arch.apic))
r = 1;
if ((lvt0 & APIC_LVT_MASKED) == 0 &&
@@ -1025,7 +1150,8 @@
apic->base_address = vcpu->arch.apic_base &
MSR_IA32_APICBASE_BASE;
- apic_set_reg(apic, APIC_LVR, APIC_VERSION);
+ kvm_apic_set_version(vcpu);
+
apic_update_ppr(apic);
hrtimer_cancel(&apic->lapic_timer.timer);
update_divide_count(apic);
@@ -1092,3 +1218,35 @@
vcpu->arch.apic->vapic_addr = vapic_addr;
}
+
+int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ u32 reg = (msr - APIC_BASE_MSR) << 4;
+
+ if (!irqchip_in_kernel(vcpu->kvm) || !apic_x2apic_mode(apic))
+ return 1;
+
+ /* if this is ICR write vector before command */
+ if (msr == 0x830)
+ apic_reg_write(apic, APIC_ICR2, (u32)(data >> 32));
+ return apic_reg_write(apic, reg, (u32)data);
+}
+
+int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ u32 reg = (msr - APIC_BASE_MSR) << 4, low, high = 0;
+
+ if (!irqchip_in_kernel(vcpu->kvm) || !apic_x2apic_mode(apic))
+ return 1;
+
+ if (apic_reg_read(apic, reg, 4, &low))
+ return 1;
+ if (msr == 0x830)
+ apic_reg_read(apic, APIC_ICR2, 4, &high);
+
+ *data = (((u64)high) << 32) | low;
+
+ return 0;
+}
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index a587f83..40010b0 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -12,6 +12,7 @@
struct kvm_timer lapic_timer;
u32 divide_count;
struct kvm_vcpu *vcpu;
+ bool irr_pending;
struct page *regs_page;
void *regs;
gpa_t vapic_addr;
@@ -28,6 +29,7 @@
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
+void kvm_apic_set_version(struct kvm_vcpu *vcpu);
int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
@@ -44,4 +46,6 @@
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
+int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
#endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 0ef5bb2..eca41ae 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -18,6 +18,7 @@
*/
#include "mmu.h"
+#include "kvm_cache_regs.h"
#include <linux/kvm_host.h>
#include <linux/types.h>
@@ -107,6 +108,9 @@
#define PT32_LEVEL_MASK(level) \
(((1ULL << PT32_LEVEL_BITS) - 1) << PT32_LEVEL_SHIFT(level))
+#define PT32_LVL_OFFSET_MASK(level) \
+ (PT32_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
+ * PT32_LEVEL_BITS))) - 1))
#define PT32_INDEX(address, level)\
(((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1))
@@ -115,10 +119,19 @@
#define PT64_BASE_ADDR_MASK (((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1))
#define PT64_DIR_BASE_ADDR_MASK \
(PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + PT64_LEVEL_BITS)) - 1))
+#define PT64_LVL_ADDR_MASK(level) \
+ (PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
+ * PT64_LEVEL_BITS))) - 1))
+#define PT64_LVL_OFFSET_MASK(level) \
+ (PT64_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
+ * PT64_LEVEL_BITS))) - 1))
#define PT32_BASE_ADDR_MASK PAGE_MASK
#define PT32_DIR_BASE_ADDR_MASK \
(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + PT32_LEVEL_BITS)) - 1))
+#define PT32_LVL_ADDR_MASK(level) \
+ (PAGE_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
+ * PT32_LEVEL_BITS))) - 1))
#define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | PT_USER_MASK \
| PT64_NX_MASK)
@@ -129,6 +142,7 @@
#define PFERR_RSVD_MASK (1U << 3)
#define PFERR_FETCH_MASK (1U << 4)
+#define PT_PDPE_LEVEL 3
#define PT_DIRECTORY_LEVEL 2
#define PT_PAGE_TABLE_LEVEL 1
@@ -139,10 +153,13 @@
#define ACC_USER_MASK PT_USER_MASK
#define ACC_ALL (ACC_EXEC_MASK | ACC_WRITE_MASK | ACC_USER_MASK)
+#define CREATE_TRACE_POINTS
+#include "mmutrace.h"
+
#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
struct kvm_rmap_desc {
- u64 *shadow_ptes[RMAP_EXT];
+ u64 *sptes[RMAP_EXT];
struct kvm_rmap_desc *more;
};
@@ -239,16 +256,25 @@
return pte & PT_WRITABLE_MASK;
}
-static int is_dirty_pte(unsigned long pte)
+static int is_dirty_gpte(unsigned long pte)
{
- return pte & shadow_dirty_mask;
+ return pte & PT_DIRTY_MASK;
}
-static int is_rmap_pte(u64 pte)
+static int is_rmap_spte(u64 pte)
{
return is_shadow_present_pte(pte);
}
+static int is_last_spte(u64 pte, int level)
+{
+ if (level == PT_PAGE_TABLE_LEVEL)
+ return 1;
+ if (is_large_pte(pte))
+ return 1;
+ return 0;
+}
+
static pfn_t spte_to_pfn(u64 pte)
{
return (pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
@@ -261,7 +287,7 @@
return (gpte & PT32_DIR_PSE36_MASK) << shift;
}
-static void set_shadow_pte(u64 *sptep, u64 spte)
+static void __set_spte(u64 *sptep, u64 spte)
{
#ifdef CONFIG_X86_64
set_64bit((unsigned long *)sptep, spte);
@@ -380,37 +406,52 @@
* Return the pointer to the largepage write count for a given
* gfn, handling slots that are not large page aligned.
*/
-static int *slot_largepage_idx(gfn_t gfn, struct kvm_memory_slot *slot)
+static int *slot_largepage_idx(gfn_t gfn,
+ struct kvm_memory_slot *slot,
+ int level)
{
unsigned long idx;
- idx = (gfn / KVM_PAGES_PER_HPAGE) -
- (slot->base_gfn / KVM_PAGES_PER_HPAGE);
- return &slot->lpage_info[idx].write_count;
+ idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
+ (slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
+ return &slot->lpage_info[level - 2][idx].write_count;
}
static void account_shadowed(struct kvm *kvm, gfn_t gfn)
{
+ struct kvm_memory_slot *slot;
int *write_count;
+ int i;
gfn = unalias_gfn(kvm, gfn);
- write_count = slot_largepage_idx(gfn,
- gfn_to_memslot_unaliased(kvm, gfn));
- *write_count += 1;
+
+ slot = gfn_to_memslot_unaliased(kvm, gfn);
+ for (i = PT_DIRECTORY_LEVEL;
+ i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+ write_count = slot_largepage_idx(gfn, slot, i);
+ *write_count += 1;
+ }
}
static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
{
+ struct kvm_memory_slot *slot;
int *write_count;
+ int i;
gfn = unalias_gfn(kvm, gfn);
- write_count = slot_largepage_idx(gfn,
- gfn_to_memslot_unaliased(kvm, gfn));
- *write_count -= 1;
- WARN_ON(*write_count < 0);
+ for (i = PT_DIRECTORY_LEVEL;
+ i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+ slot = gfn_to_memslot_unaliased(kvm, gfn);
+ write_count = slot_largepage_idx(gfn, slot, i);
+ *write_count -= 1;
+ WARN_ON(*write_count < 0);
+ }
}
-static int has_wrprotected_page(struct kvm *kvm, gfn_t gfn)
+static int has_wrprotected_page(struct kvm *kvm,
+ gfn_t gfn,
+ int level)
{
struct kvm_memory_slot *slot;
int *largepage_idx;
@@ -418,47 +459,67 @@
gfn = unalias_gfn(kvm, gfn);
slot = gfn_to_memslot_unaliased(kvm, gfn);
if (slot) {
- largepage_idx = slot_largepage_idx(gfn, slot);
+ largepage_idx = slot_largepage_idx(gfn, slot, level);
return *largepage_idx;
}
return 1;
}
-static int host_largepage_backed(struct kvm *kvm, gfn_t gfn)
+static int host_mapping_level(struct kvm *kvm, gfn_t gfn)
{
+ unsigned long page_size = PAGE_SIZE;
struct vm_area_struct *vma;
unsigned long addr;
- int ret = 0;
+ int i, ret = 0;
addr = gfn_to_hva(kvm, gfn);
if (kvm_is_error_hva(addr))
- return ret;
+ return page_size;
down_read(¤t->mm->mmap_sem);
vma = find_vma(current->mm, addr);
- if (vma && is_vm_hugetlb_page(vma))
- ret = 1;
+ if (!vma)
+ goto out;
+
+ page_size = vma_kernel_pagesize(vma);
+
+out:
up_read(¤t->mm->mmap_sem);
+ for (i = PT_PAGE_TABLE_LEVEL;
+ i < (PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES); ++i) {
+ if (page_size >= KVM_HPAGE_SIZE(i))
+ ret = i;
+ else
+ break;
+ }
+
return ret;
}
-static int is_largepage_backed(struct kvm_vcpu *vcpu, gfn_t large_gfn)
+static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
{
struct kvm_memory_slot *slot;
-
- if (has_wrprotected_page(vcpu->kvm, large_gfn))
- return 0;
-
- if (!host_largepage_backed(vcpu->kvm, large_gfn))
- return 0;
+ int host_level;
+ int level = PT_PAGE_TABLE_LEVEL;
slot = gfn_to_memslot(vcpu->kvm, large_gfn);
if (slot && slot->dirty_bitmap)
- return 0;
+ return PT_PAGE_TABLE_LEVEL;
- return 1;
+ host_level = host_mapping_level(vcpu->kvm, large_gfn);
+
+ if (host_level == PT_PAGE_TABLE_LEVEL)
+ return host_level;
+
+ for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) {
+
+ if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
+ break;
+ }
+
+ return level - 1;
}
/*
@@ -466,19 +527,19 @@
* Note: gfn must be unaliased before this function get called
*/
-static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
+static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level)
{
struct kvm_memory_slot *slot;
unsigned long idx;
slot = gfn_to_memslot(kvm, gfn);
- if (!lpage)
+ if (likely(level == PT_PAGE_TABLE_LEVEL))
return &slot->rmap[gfn - slot->base_gfn];
- idx = (gfn / KVM_PAGES_PER_HPAGE) -
- (slot->base_gfn / KVM_PAGES_PER_HPAGE);
+ idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
+ (slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
- return &slot->lpage_info[idx].rmap_pde;
+ return &slot->lpage_info[level - 2][idx].rmap_pde;
}
/*
@@ -494,42 +555,42 @@
* the spte was not added.
*
*/
-static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
{
struct kvm_mmu_page *sp;
struct kvm_rmap_desc *desc;
unsigned long *rmapp;
int i, count = 0;
- if (!is_rmap_pte(*spte))
+ if (!is_rmap_spte(*spte))
return count;
gfn = unalias_gfn(vcpu->kvm, gfn);
sp = page_header(__pa(spte));
sp->gfns[spte - sp->spt] = gfn;
- rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+ rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
if (!*rmapp) {
rmap_printk("rmap_add: %p %llx 0->1\n", spte, *spte);
*rmapp = (unsigned long)spte;
} else if (!(*rmapp & 1)) {
rmap_printk("rmap_add: %p %llx 1->many\n", spte, *spte);
desc = mmu_alloc_rmap_desc(vcpu);
- desc->shadow_ptes[0] = (u64 *)*rmapp;
- desc->shadow_ptes[1] = spte;
+ desc->sptes[0] = (u64 *)*rmapp;
+ desc->sptes[1] = spte;
*rmapp = (unsigned long)desc | 1;
} else {
rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
- while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
+ while (desc->sptes[RMAP_EXT-1] && desc->more) {
desc = desc->more;
count += RMAP_EXT;
}
- if (desc->shadow_ptes[RMAP_EXT-1]) {
+ if (desc->sptes[RMAP_EXT-1]) {
desc->more = mmu_alloc_rmap_desc(vcpu);
desc = desc->more;
}
- for (i = 0; desc->shadow_ptes[i]; ++i)
+ for (i = 0; desc->sptes[i]; ++i)
;
- desc->shadow_ptes[i] = spte;
+ desc->sptes[i] = spte;
}
return count;
}
@@ -541,14 +602,14 @@
{
int j;
- for (j = RMAP_EXT - 1; !desc->shadow_ptes[j] && j > i; --j)
+ for (j = RMAP_EXT - 1; !desc->sptes[j] && j > i; --j)
;
- desc->shadow_ptes[i] = desc->shadow_ptes[j];
- desc->shadow_ptes[j] = NULL;
+ desc->sptes[i] = desc->sptes[j];
+ desc->sptes[j] = NULL;
if (j != 0)
return;
if (!prev_desc && !desc->more)
- *rmapp = (unsigned long)desc->shadow_ptes[0];
+ *rmapp = (unsigned long)desc->sptes[0];
else
if (prev_desc)
prev_desc->more = desc->more;
@@ -566,7 +627,7 @@
unsigned long *rmapp;
int i;
- if (!is_rmap_pte(*spte))
+ if (!is_rmap_spte(*spte))
return;
sp = page_header(__pa(spte));
pfn = spte_to_pfn(*spte);
@@ -576,7 +637,7 @@
kvm_release_pfn_dirty(pfn);
else
kvm_release_pfn_clean(pfn);
- rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], is_large_pte(*spte));
+ rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
if (!*rmapp) {
printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
BUG();
@@ -593,8 +654,8 @@
desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
prev_desc = NULL;
while (desc) {
- for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i)
- if (desc->shadow_ptes[i] == spte) {
+ for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i)
+ if (desc->sptes[i] == spte) {
rmap_desc_remove_entry(rmapp,
desc, i,
prev_desc);
@@ -625,10 +686,10 @@
prev_desc = NULL;
prev_spte = NULL;
while (desc) {
- for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i) {
+ for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i) {
if (prev_spte == spte)
- return desc->shadow_ptes[i];
- prev_spte = desc->shadow_ptes[i];
+ return desc->sptes[i];
+ prev_spte = desc->sptes[i];
}
desc = desc->more;
}
@@ -639,10 +700,10 @@
{
unsigned long *rmapp;
u64 *spte;
- int write_protected = 0;
+ int i, write_protected = 0;
gfn = unalias_gfn(kvm, gfn);
- rmapp = gfn_to_rmap(kvm, gfn, 0);
+ rmapp = gfn_to_rmap(kvm, gfn, PT_PAGE_TABLE_LEVEL);
spte = rmap_next(kvm, rmapp, NULL);
while (spte) {
@@ -650,7 +711,7 @@
BUG_ON(!(*spte & PT_PRESENT_MASK));
rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
if (is_writeble_pte(*spte)) {
- set_shadow_pte(spte, *spte & ~PT_WRITABLE_MASK);
+ __set_spte(spte, *spte & ~PT_WRITABLE_MASK);
write_protected = 1;
}
spte = rmap_next(kvm, rmapp, spte);
@@ -664,21 +725,24 @@
}
/* check for huge page mappings */
- rmapp = gfn_to_rmap(kvm, gfn, 1);
- spte = rmap_next(kvm, rmapp, NULL);
- while (spte) {
- BUG_ON(!spte);
- BUG_ON(!(*spte & PT_PRESENT_MASK));
- BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
- pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
- if (is_writeble_pte(*spte)) {
- rmap_remove(kvm, spte);
- --kvm->stat.lpages;
- set_shadow_pte(spte, shadow_trap_nonpresent_pte);
- spte = NULL;
- write_protected = 1;
+ for (i = PT_DIRECTORY_LEVEL;
+ i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+ rmapp = gfn_to_rmap(kvm, gfn, i);
+ spte = rmap_next(kvm, rmapp, NULL);
+ while (spte) {
+ BUG_ON(!spte);
+ BUG_ON(!(*spte & PT_PRESENT_MASK));
+ BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
+ pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
+ if (is_writeble_pte(*spte)) {
+ rmap_remove(kvm, spte);
+ --kvm->stat.lpages;
+ __set_spte(spte, shadow_trap_nonpresent_pte);
+ spte = NULL;
+ write_protected = 1;
+ }
+ spte = rmap_next(kvm, rmapp, spte);
}
- spte = rmap_next(kvm, rmapp, spte);
}
return write_protected;
@@ -693,7 +757,7 @@
BUG_ON(!(*spte & PT_PRESENT_MASK));
rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
rmap_remove(kvm, spte);
- set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+ __set_spte(spte, shadow_trap_nonpresent_pte);
need_tlb_flush = 1;
}
return need_tlb_flush;
@@ -702,7 +766,7 @@
static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
int (*handler)(struct kvm *kvm, unsigned long *rmapp))
{
- int i;
+ int i, j;
int retval = 0;
/*
@@ -721,11 +785,15 @@
end = start + (memslot->npages << PAGE_SHIFT);
if (hva >= start && hva < end) {
gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+
retval |= handler(kvm, &memslot->rmap[gfn_offset]);
- retval |= handler(kvm,
- &memslot->lpage_info[
- gfn_offset /
- KVM_PAGES_PER_HPAGE].rmap_pde);
+
+ for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
+ int idx = gfn_offset;
+ idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
+ retval |= handler(kvm,
+ &memslot->lpage_info[j][idx].rmap_pde);
+ }
}
}
@@ -763,12 +831,15 @@
#define RMAP_RECYCLE_THRESHOLD 1000
-static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
{
unsigned long *rmapp;
+ struct kvm_mmu_page *sp;
+
+ sp = page_header(__pa(spte));
gfn = unalias_gfn(vcpu->kvm, gfn);
- rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+ rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
kvm_unmap_rmapp(vcpu->kvm, rmapp);
kvm_flush_remote_tlbs(vcpu->kvm);
@@ -1109,6 +1180,7 @@
return 1;
}
+ trace_kvm_mmu_sync_page(sp);
if (rmap_write_protect(vcpu->kvm, sp->gfn))
kvm_flush_remote_tlbs(vcpu->kvm);
kvm_unlink_unsync_page(vcpu->kvm, sp);
@@ -1231,8 +1303,6 @@
quadrant &= (1 << ((PT32_PT_BITS - PT64_PT_BITS) * level)) - 1;
role.quadrant = quadrant;
}
- pgprintk("%s: looking gfn %lx role %x\n", __func__,
- gfn, role.word);
index = kvm_page_table_hashfn(gfn);
bucket = &vcpu->kvm->arch.mmu_page_hash[index];
hlist_for_each_entry_safe(sp, node, tmp, bucket, hash_link)
@@ -1249,14 +1319,13 @@
set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
kvm_mmu_mark_parents_unsync(vcpu, sp);
}
- pgprintk("%s: found\n", __func__);
+ trace_kvm_mmu_get_page(sp, false);
return sp;
}
++vcpu->kvm->stat.mmu_cache_miss;
sp = kvm_mmu_alloc_page(vcpu, parent_pte);
if (!sp)
return sp;
- pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
sp->gfn = gfn;
sp->role = role;
hlist_add_head(&sp->hash_link, bucket);
@@ -1269,6 +1338,7 @@
vcpu->arch.mmu.prefetch_page(vcpu, sp);
else
nonpaging_prefetch_page(vcpu, sp);
+ trace_kvm_mmu_get_page(sp, true);
return sp;
}
@@ -1292,6 +1362,11 @@
{
if (iterator->level < PT_PAGE_TABLE_LEVEL)
return false;
+
+ if (iterator->level == PT_PAGE_TABLE_LEVEL)
+ if (is_large_pte(*iterator->sptep))
+ return false;
+
iterator->index = SHADOW_PT_INDEX(iterator->addr, iterator->level);
iterator->sptep = ((u64 *)__va(iterator->shadow_addr)) + iterator->index;
return true;
@@ -1312,25 +1387,17 @@
pt = sp->spt;
- if (sp->role.level == PT_PAGE_TABLE_LEVEL) {
- for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
- if (is_shadow_present_pte(pt[i]))
- rmap_remove(kvm, &pt[i]);
- pt[i] = shadow_trap_nonpresent_pte;
- }
- return;
- }
-
for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
ent = pt[i];
if (is_shadow_present_pte(ent)) {
- if (!is_large_pte(ent)) {
+ if (!is_last_spte(ent, sp->role.level)) {
ent &= PT64_BASE_ADDR_MASK;
mmu_page_remove_parent_pte(page_header(ent),
&pt[i]);
} else {
- --kvm->stat.lpages;
+ if (is_large_pte(ent))
+ --kvm->stat.lpages;
rmap_remove(kvm, &pt[i]);
}
}
@@ -1346,10 +1413,10 @@
static void kvm_mmu_reset_last_pte_updated(struct kvm *kvm)
{
int i;
+ struct kvm_vcpu *vcpu;
- for (i = 0; i < KVM_MAX_VCPUS; ++i)
- if (kvm->vcpus[i])
- kvm->vcpus[i]->arch.last_pte_updated = NULL;
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ vcpu->arch.last_pte_updated = NULL;
}
static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
@@ -1368,7 +1435,7 @@
}
BUG_ON(!parent_pte);
kvm_mmu_put_page(sp, parent_pte);
- set_shadow_pte(parent_pte, shadow_trap_nonpresent_pte);
+ __set_spte(parent_pte, shadow_trap_nonpresent_pte);
}
}
@@ -1400,6 +1467,8 @@
static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
{
int ret;
+
+ trace_kvm_mmu_zap_page(sp);
++kvm->stat.mmu_shadow_zapped;
ret = mmu_zap_unsync_children(kvm, sp);
kvm_mmu_page_unlink_children(kvm, sp);
@@ -1516,7 +1585,7 @@
for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
if (pt[i] == shadow_notrap_nonpresent_pte)
- set_shadow_pte(&pt[i], shadow_trap_nonpresent_pte);
+ __set_spte(&pt[i], shadow_trap_nonpresent_pte);
}
}
@@ -1646,6 +1715,7 @@
struct kvm_mmu_page *s;
struct hlist_node *node, *n;
+ trace_kvm_mmu_unsync_page(sp);
index = kvm_page_table_hashfn(sp->gfn);
bucket = &vcpu->kvm->arch.mmu_page_hash[index];
/* don't unsync if pagetable is shadowed with multiple roles */
@@ -1682,9 +1752,9 @@
return 0;
}
-static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
unsigned pte_access, int user_fault,
- int write_fault, int dirty, int largepage,
+ int write_fault, int dirty, int level,
gfn_t gfn, pfn_t pfn, bool speculative,
bool can_unsync)
{
@@ -1707,7 +1777,7 @@
spte |= shadow_nx_mask;
if (pte_access & ACC_USER_MASK)
spte |= shadow_user_mask;
- if (largepage)
+ if (level > PT_PAGE_TABLE_LEVEL)
spte |= PT_PAGE_SIZE_MASK;
if (tdp_enabled)
spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
@@ -1718,7 +1788,8 @@
if ((pte_access & ACC_WRITE_MASK)
|| (write_fault && !is_write_protection(vcpu) && !user_fault)) {
- if (largepage && has_wrprotected_page(vcpu->kvm, gfn)) {
+ if (level > PT_PAGE_TABLE_LEVEL &&
+ has_wrprotected_page(vcpu->kvm, gfn, level)) {
ret = 1;
spte = shadow_trap_nonpresent_pte;
goto set_pte;
@@ -1732,7 +1803,7 @@
* is responsibility of mmu_get_page / kvm_sync_page.
* Same reasoning can be applied to dirty page accounting.
*/
- if (!can_unsync && is_writeble_pte(*shadow_pte))
+ if (!can_unsync && is_writeble_pte(*sptep))
goto set_pte;
if (mmu_need_write_protect(vcpu, gfn, can_unsync)) {
@@ -1749,65 +1820,67 @@
mark_page_dirty(vcpu->kvm, gfn);
set_pte:
- set_shadow_pte(shadow_pte, spte);
+ __set_spte(sptep, spte);
return ret;
}
-static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
unsigned pt_access, unsigned pte_access,
int user_fault, int write_fault, int dirty,
- int *ptwrite, int largepage, gfn_t gfn,
+ int *ptwrite, int level, gfn_t gfn,
pfn_t pfn, bool speculative)
{
int was_rmapped = 0;
- int was_writeble = is_writeble_pte(*shadow_pte);
+ int was_writeble = is_writeble_pte(*sptep);
int rmap_count;
pgprintk("%s: spte %llx access %x write_fault %d"
" user_fault %d gfn %lx\n",
- __func__, *shadow_pte, pt_access,
+ __func__, *sptep, pt_access,
write_fault, user_fault, gfn);
- if (is_rmap_pte(*shadow_pte)) {
+ if (is_rmap_spte(*sptep)) {
/*
* If we overwrite a PTE page pointer with a 2MB PMD, unlink
* the parent of the now unreachable PTE.
*/
- if (largepage && !is_large_pte(*shadow_pte)) {
+ if (level > PT_PAGE_TABLE_LEVEL &&
+ !is_large_pte(*sptep)) {
struct kvm_mmu_page *child;
- u64 pte = *shadow_pte;
+ u64 pte = *sptep;
child = page_header(pte & PT64_BASE_ADDR_MASK);
- mmu_page_remove_parent_pte(child, shadow_pte);
- } else if (pfn != spte_to_pfn(*shadow_pte)) {
+ mmu_page_remove_parent_pte(child, sptep);
+ } else if (pfn != spte_to_pfn(*sptep)) {
pgprintk("hfn old %lx new %lx\n",
- spte_to_pfn(*shadow_pte), pfn);
- rmap_remove(vcpu->kvm, shadow_pte);
+ spte_to_pfn(*sptep), pfn);
+ rmap_remove(vcpu->kvm, sptep);
} else
was_rmapped = 1;
}
- if (set_spte(vcpu, shadow_pte, pte_access, user_fault, write_fault,
- dirty, largepage, gfn, pfn, speculative, true)) {
+
+ if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
+ dirty, level, gfn, pfn, speculative, true)) {
if (write_fault)
*ptwrite = 1;
kvm_x86_ops->tlb_flush(vcpu);
}
- pgprintk("%s: setting spte %llx\n", __func__, *shadow_pte);
+ pgprintk("%s: setting spte %llx\n", __func__, *sptep);
pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
- is_large_pte(*shadow_pte)? "2MB" : "4kB",
- is_present_pte(*shadow_pte)?"RW":"R", gfn,
- *shadow_pte, shadow_pte);
- if (!was_rmapped && is_large_pte(*shadow_pte))
+ is_large_pte(*sptep)? "2MB" : "4kB",
+ *sptep & PT_PRESENT_MASK ?"RW":"R", gfn,
+ *sptep, sptep);
+ if (!was_rmapped && is_large_pte(*sptep))
++vcpu->kvm->stat.lpages;
- page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
+ page_header_update_slot(vcpu->kvm, sptep, gfn);
if (!was_rmapped) {
- rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
- if (!is_rmap_pte(*shadow_pte))
+ rmap_count = rmap_add(vcpu, sptep, gfn);
+ if (!is_rmap_spte(*sptep))
kvm_release_pfn_clean(pfn);
if (rmap_count > RMAP_RECYCLE_THRESHOLD)
- rmap_recycle(vcpu, gfn, largepage);
+ rmap_recycle(vcpu, sptep, gfn);
} else {
if (was_writeble)
kvm_release_pfn_dirty(pfn);
@@ -1815,7 +1888,7 @@
kvm_release_pfn_clean(pfn);
}
if (speculative) {
- vcpu->arch.last_pte_updated = shadow_pte;
+ vcpu->arch.last_pte_updated = sptep;
vcpu->arch.last_pte_gfn = gfn;
}
}
@@ -1825,7 +1898,7 @@
}
static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
- int largepage, gfn_t gfn, pfn_t pfn)
+ int level, gfn_t gfn, pfn_t pfn)
{
struct kvm_shadow_walk_iterator iterator;
struct kvm_mmu_page *sp;
@@ -1833,11 +1906,10 @@
gfn_t pseudo_gfn;
for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
- if (iterator.level == PT_PAGE_TABLE_LEVEL
- || (largepage && iterator.level == PT_DIRECTORY_LEVEL)) {
+ if (iterator.level == level) {
mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
0, write, 1, &pt_write,
- largepage, gfn, pfn, false);
+ level, gfn, pfn, false);
++vcpu->stat.pf_fixed;
break;
}
@@ -1853,10 +1925,10 @@
return -ENOMEM;
}
- set_shadow_pte(iterator.sptep,
- __pa(sp->spt)
- | PT_PRESENT_MASK | PT_WRITABLE_MASK
- | shadow_user_mask | shadow_x_mask);
+ __set_spte(iterator.sptep,
+ __pa(sp->spt)
+ | PT_PRESENT_MASK | PT_WRITABLE_MASK
+ | shadow_user_mask | shadow_x_mask);
}
}
return pt_write;
@@ -1865,14 +1937,20 @@
static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
{
int r;
- int largepage = 0;
+ int level;
pfn_t pfn;
unsigned long mmu_seq;
- if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
- gfn &= ~(KVM_PAGES_PER_HPAGE-1);
- largepage = 1;
- }
+ level = mapping_level(vcpu, gfn);
+
+ /*
+ * This path builds a PAE pagetable - so we can map 2mb pages at
+ * maximum. Therefore check if the level is larger than that.
+ */
+ if (level > PT_DIRECTORY_LEVEL)
+ level = PT_DIRECTORY_LEVEL;
+
+ gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
mmu_seq = vcpu->kvm->mmu_notifier_seq;
smp_rmb();
@@ -1888,7 +1966,7 @@
if (mmu_notifier_retry(vcpu, mmu_seq))
goto out_unlock;
kvm_mmu_free_some_pages(vcpu);
- r = __direct_map(vcpu, v, write, largepage, gfn, pfn);
+ r = __direct_map(vcpu, v, write, level, gfn, pfn);
spin_unlock(&vcpu->kvm->mmu_lock);
@@ -1954,6 +2032,7 @@
gfn_t root_gfn;
struct kvm_mmu_page *sp;
int direct = 0;
+ u64 pdptr;
root_gfn = vcpu->arch.cr3 >> PAGE_SHIFT;
@@ -1981,11 +2060,12 @@
ASSERT(!VALID_PAGE(root));
if (vcpu->arch.mmu.root_level == PT32E_ROOT_LEVEL) {
- if (!is_present_pte(vcpu->arch.pdptrs[i])) {
+ pdptr = kvm_pdptr_read(vcpu, i);
+ if (!is_present_gpte(pdptr)) {
vcpu->arch.mmu.pae_root[i] = 0;
continue;
}
- root_gfn = vcpu->arch.pdptrs[i] >> PAGE_SHIFT;
+ root_gfn = pdptr >> PAGE_SHIFT;
} else if (vcpu->arch.mmu.root_level == 0)
root_gfn = 0;
if (mmu_check_root(vcpu, root_gfn))
@@ -2062,7 +2142,7 @@
{
pfn_t pfn;
int r;
- int largepage = 0;
+ int level;
gfn_t gfn = gpa >> PAGE_SHIFT;
unsigned long mmu_seq;
@@ -2073,10 +2153,10 @@
if (r)
return r;
- if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
- gfn &= ~(KVM_PAGES_PER_HPAGE-1);
- largepage = 1;
- }
+ level = mapping_level(vcpu, gfn);
+
+ gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
+
mmu_seq = vcpu->kvm->mmu_notifier_seq;
smp_rmb();
pfn = gfn_to_pfn(vcpu->kvm, gfn);
@@ -2089,7 +2169,7 @@
goto out_unlock;
kvm_mmu_free_some_pages(vcpu);
r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
- largepage, gfn, pfn);
+ level, gfn, pfn);
spin_unlock(&vcpu->kvm->mmu_lock);
return r;
@@ -2206,7 +2286,9 @@
context->rsvd_bits_mask[0][0] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51);
context->rsvd_bits_mask[1][3] = context->rsvd_bits_mask[0][3];
- context->rsvd_bits_mask[1][2] = context->rsvd_bits_mask[0][2];
+ context->rsvd_bits_mask[1][2] = exb_bit_rsvd |
+ rsvd_bits(maxphyaddr, 51) |
+ rsvd_bits(13, 29);
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 20); /* large page */
@@ -2357,8 +2439,8 @@
spin_unlock(&vcpu->kvm->mmu_lock);
if (r)
goto out;
+ /* set_cr3() should ensure TLB has been flushed */
kvm_x86_ops->set_cr3(vcpu, vcpu->arch.mmu.root_hpa);
- kvm_mmu_flush_tlb(vcpu);
out:
return r;
}
@@ -2378,15 +2460,14 @@
pte = *spte;
if (is_shadow_present_pte(pte)) {
- if (sp->role.level == PT_PAGE_TABLE_LEVEL ||
- is_large_pte(pte))
+ if (is_last_spte(pte, sp->role.level))
rmap_remove(vcpu->kvm, spte);
else {
child = page_header(pte & PT64_BASE_ADDR_MASK);
mmu_page_remove_parent_pte(child, spte);
}
}
- set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+ __set_spte(spte, shadow_trap_nonpresent_pte);
if (is_large_pte(pte))
--vcpu->kvm->stat.lpages;
}
@@ -2397,11 +2478,8 @@
const void *new)
{
if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
- if (!vcpu->arch.update_pte.largepage ||
- sp->role.glevels == PT32_ROOT_LEVEL) {
- ++vcpu->kvm->stat.mmu_pde_zapped;
- return;
- }
+ ++vcpu->kvm->stat.mmu_pde_zapped;
+ return;
}
++vcpu->kvm->stat.mmu_pte_updated;
@@ -2447,8 +2525,6 @@
u64 gpte = 0;
pfn_t pfn;
- vcpu->arch.update_pte.largepage = 0;
-
if (bytes != 4 && bytes != 8)
return;
@@ -2472,14 +2548,10 @@
if ((bytes == 4) && (gpa % 4 == 0))
memcpy((void *)&gpte, new, 4);
}
- if (!is_present_pte(gpte))
+ if (!is_present_gpte(gpte))
return;
gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
- if (is_large_pte(gpte) && is_largepage_backed(vcpu, gfn)) {
- gfn &= ~(KVM_PAGES_PER_HPAGE-1);
- vcpu->arch.update_pte.largepage = 1;
- }
vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
smp_rmb();
pfn = gfn_to_pfn(vcpu->kvm, gfn);
@@ -2622,6 +2694,9 @@
gpa_t gpa;
int r;
+ if (tdp_enabled)
+ return 0;
+
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
spin_lock(&vcpu->kvm->mmu_lock);
@@ -2633,7 +2708,8 @@
void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
{
- while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES) {
+ while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES &&
+ !list_empty(&vcpu->kvm->arch.active_mmu_pages)) {
struct kvm_mmu_page *sp;
sp = container_of(vcpu->kvm->arch.active_mmu_pages.prev,
@@ -2670,8 +2746,9 @@
++vcpu->stat.mmio_exits;
return 0;
case EMULATE_FAIL:
- kvm_report_emulation_failure(vcpu, "pagetable");
- return 1;
+ vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+ return 0;
default:
BUG();
}
@@ -2712,12 +2789,6 @@
ASSERT(vcpu);
- if (vcpu->kvm->arch.n_requested_mmu_pages)
- vcpu->kvm->arch.n_free_mmu_pages =
- vcpu->kvm->arch.n_requested_mmu_pages;
- else
- vcpu->kvm->arch.n_free_mmu_pages =
- vcpu->kvm->arch.n_alloc_mmu_pages;
/*
* When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
* Therefore we need to allocate shadow page tables in the first
@@ -3029,6 +3100,24 @@
return r;
}
+int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4])
+{
+ struct kvm_shadow_walk_iterator iterator;
+ int nr_sptes = 0;
+
+ spin_lock(&vcpu->kvm->mmu_lock);
+ for_each_shadow_entry(vcpu, addr, iterator) {
+ sptes[iterator.level-1] = *iterator.sptep;
+ nr_sptes++;
+ if (!is_shadow_present_pte(*iterator.sptep))
+ break;
+ }
+ spin_unlock(&vcpu->kvm->mmu_lock);
+
+ return nr_sptes;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_get_spte_hierarchy);
+
#ifdef AUDIT
static const char *audit_msg;
@@ -3041,6 +3130,54 @@
return gva;
}
+
+typedef void (*inspect_spte_fn) (struct kvm *kvm, struct kvm_mmu_page *sp,
+ u64 *sptep);
+
+static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
+ inspect_spte_fn fn)
+{
+ int i;
+
+ for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+ u64 ent = sp->spt[i];
+
+ if (is_shadow_present_pte(ent)) {
+ if (!is_last_spte(ent, sp->role.level)) {
+ struct kvm_mmu_page *child;
+ child = page_header(ent & PT64_BASE_ADDR_MASK);
+ __mmu_spte_walk(kvm, child, fn);
+ } else
+ fn(kvm, sp, &sp->spt[i]);
+ }
+ }
+}
+
+static void mmu_spte_walk(struct kvm_vcpu *vcpu, inspect_spte_fn fn)
+{
+ int i;
+ struct kvm_mmu_page *sp;
+
+ if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+ return;
+ if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
+ hpa_t root = vcpu->arch.mmu.root_hpa;
+ sp = page_header(root);
+ __mmu_spte_walk(vcpu->kvm, sp, fn);
+ return;
+ }
+ for (i = 0; i < 4; ++i) {
+ hpa_t root = vcpu->arch.mmu.pae_root[i];
+
+ if (root && VALID_PAGE(root)) {
+ root &= PT64_BASE_ADDR_MASK;
+ sp = page_header(root);
+ __mmu_spte_walk(vcpu->kvm, sp, fn);
+ }
+ }
+ return;
+}
+
static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
gva_t va, int level)
{
@@ -3055,20 +3192,19 @@
continue;
va = canonicalize(va);
- if (level > 1) {
- if (ent == shadow_notrap_nonpresent_pte)
- printk(KERN_ERR "audit: (%s) nontrapping pte"
- " in nonleaf level: levels %d gva %lx"
- " level %d pte %llx\n", audit_msg,
- vcpu->arch.mmu.root_level, va, level, ent);
- else
- audit_mappings_page(vcpu, ent, va, level - 1);
- } else {
+ if (is_shadow_present_pte(ent) && !is_last_spte(ent, level))
+ audit_mappings_page(vcpu, ent, va, level - 1);
+ else {
gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
gfn_t gfn = gpa >> PAGE_SHIFT;
pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
hpa_t hpa = (hpa_t)pfn << PAGE_SHIFT;
+ if (is_error_pfn(pfn)) {
+ kvm_release_pfn_clean(pfn);
+ continue;
+ }
+
if (is_shadow_present_pte(ent)
&& (ent & PT64_BASE_ADDR_MASK) != hpa)
printk(KERN_ERR "xx audit error: (%s) levels %d"
@@ -3122,7 +3258,7 @@
d = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
while (d) {
for (k = 0; k < RMAP_EXT; ++k)
- if (d->shadow_ptes[k])
+ if (d->sptes[k])
++nmaps;
else
break;
@@ -3133,9 +3269,48 @@
return nmaps;
}
-static int count_writable_mappings(struct kvm_vcpu *vcpu)
+void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
{
- int nmaps = 0;
+ unsigned long *rmapp;
+ struct kvm_mmu_page *rev_sp;
+ gfn_t gfn;
+
+ if (*sptep & PT_WRITABLE_MASK) {
+ rev_sp = page_header(__pa(sptep));
+ gfn = rev_sp->gfns[sptep - rev_sp->spt];
+
+ if (!gfn_to_memslot(kvm, gfn)) {
+ if (!printk_ratelimit())
+ return;
+ printk(KERN_ERR "%s: no memslot for gfn %ld\n",
+ audit_msg, gfn);
+ printk(KERN_ERR "%s: index %ld of sp (gfn=%lx)\n",
+ audit_msg, sptep - rev_sp->spt,
+ rev_sp->gfn);
+ dump_stack();
+ return;
+ }
+
+ rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt],
+ is_large_pte(*sptep));
+ if (!*rmapp) {
+ if (!printk_ratelimit())
+ return;
+ printk(KERN_ERR "%s: no rmap for writable spte %llx\n",
+ audit_msg, *sptep);
+ dump_stack();
+ }
+ }
+
+}
+
+void audit_writable_sptes_have_rmaps(struct kvm_vcpu *vcpu)
+{
+ mmu_spte_walk(vcpu, inspect_spte_has_rmap);
+}
+
+static void check_writable_mappings_rmap(struct kvm_vcpu *vcpu)
+{
struct kvm_mmu_page *sp;
int i;
@@ -3152,20 +3327,16 @@
continue;
if (!(ent & PT_WRITABLE_MASK))
continue;
- ++nmaps;
+ inspect_spte_has_rmap(vcpu->kvm, sp, &pt[i]);
}
}
- return nmaps;
+ return;
}
static void audit_rmap(struct kvm_vcpu *vcpu)
{
- int n_rmap = count_rmaps(vcpu);
- int n_actual = count_writable_mappings(vcpu);
-
- if (n_rmap != n_actual)
- printk(KERN_ERR "%s: (%s) rmap %d actual %d\n",
- __func__, audit_msg, n_rmap, n_actual);
+ check_writable_mappings_rmap(vcpu);
+ count_rmaps(vcpu);
}
static void audit_write_protection(struct kvm_vcpu *vcpu)
@@ -3173,20 +3344,28 @@
struct kvm_mmu_page *sp;
struct kvm_memory_slot *slot;
unsigned long *rmapp;
+ u64 *spte;
gfn_t gfn;
list_for_each_entry(sp, &vcpu->kvm->arch.active_mmu_pages, link) {
if (sp->role.direct)
continue;
+ if (sp->unsync)
+ continue;
gfn = unalias_gfn(vcpu->kvm, sp->gfn);
slot = gfn_to_memslot_unaliased(vcpu->kvm, sp->gfn);
rmapp = &slot->rmap[gfn - slot->base_gfn];
- if (*rmapp)
- printk(KERN_ERR "%s: (%s) shadow page has writable"
- " mappings: gfn %lx role %x\n",
+
+ spte = rmap_next(vcpu->kvm, rmapp, NULL);
+ while (spte) {
+ if (*spte & PT_WRITABLE_MASK)
+ printk(KERN_ERR "%s: (%s) shadow page has "
+ "writable mappings: gfn %lx role %x\n",
__func__, audit_msg, sp->gfn,
sp->role.word);
+ spte = rmap_next(vcpu->kvm, rmapp, spte);
+ }
}
}
@@ -3198,7 +3377,9 @@
audit_msg = msg;
audit_rmap(vcpu);
audit_write_protection(vcpu);
- audit_mappings(vcpu);
+ if (strcmp("pre pte write", audit_msg) != 0)
+ audit_mappings(vcpu);
+ audit_writable_sptes_have_rmaps(vcpu);
dbg = olddbg;
}
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 3494a2f..61a1b38 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -37,6 +37,8 @@
#define PT32_ROOT_LEVEL 2
#define PT32E_ROOT_LEVEL 3
+int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]);
+
static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
{
if (unlikely(vcpu->kvm->arch.n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES))
@@ -75,7 +77,7 @@
return vcpu->arch.cr0 & X86_CR0_PG;
}
-static inline int is_present_pte(unsigned long pte)
+static inline int is_present_gpte(unsigned long pte)
{
return pte & PT_PRESENT_MASK;
}
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
new file mode 100644
index 0000000..3e4a5c6
--- /dev/null
+++ b/arch/x86/kvm/mmutrace.h
@@ -0,0 +1,220 @@
+#if !defined(_TRACE_KVMMMU_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVMMMU_H
+
+#include <linux/tracepoint.h>
+#include <linux/ftrace_event.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvmmmu
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE mmutrace
+
+#define KVM_MMU_PAGE_FIELDS \
+ __field(__u64, gfn) \
+ __field(__u32, role) \
+ __field(__u32, root_count) \
+ __field(__u32, unsync)
+
+#define KVM_MMU_PAGE_ASSIGN(sp) \
+ __entry->gfn = sp->gfn; \
+ __entry->role = sp->role.word; \
+ __entry->root_count = sp->root_count; \
+ __entry->unsync = sp->unsync;
+
+#define KVM_MMU_PAGE_PRINTK() ({ \
+ const char *ret = p->buffer + p->len; \
+ static const char *access_str[] = { \
+ "---", "--x", "w--", "w-x", "-u-", "-ux", "wu-", "wux" \
+ }; \
+ union kvm_mmu_page_role role; \
+ \
+ role.word = __entry->role; \
+ \
+ trace_seq_printf(p, "sp gfn %llx %u/%u q%u%s %s%s %spge" \
+ " %snxe root %u %s%c", \
+ __entry->gfn, role.level, role.glevels, \
+ role.quadrant, \
+ role.direct ? " direct" : "", \
+ access_str[role.access], \
+ role.invalid ? " invalid" : "", \
+ role.cr4_pge ? "" : "!", \
+ role.nxe ? "" : "!", \
+ __entry->root_count, \
+ __entry->unsync ? "unsync" : "sync", 0); \
+ ret; \
+ })
+
+#define kvm_mmu_trace_pferr_flags \
+ { PFERR_PRESENT_MASK, "P" }, \
+ { PFERR_WRITE_MASK, "W" }, \
+ { PFERR_USER_MASK, "U" }, \
+ { PFERR_RSVD_MASK, "RSVD" }, \
+ { PFERR_FETCH_MASK, "F" }
+
+/*
+ * A pagetable walk has started
+ */
+TRACE_EVENT(
+ kvm_mmu_pagetable_walk,
+ TP_PROTO(u64 addr, int write_fault, int user_fault, int fetch_fault),
+ TP_ARGS(addr, write_fault, user_fault, fetch_fault),
+
+ TP_STRUCT__entry(
+ __field(__u64, addr)
+ __field(__u32, pferr)
+ ),
+
+ TP_fast_assign(
+ __entry->addr = addr;
+ __entry->pferr = (!!write_fault << 1) | (!!user_fault << 2)
+ | (!!fetch_fault << 4);
+ ),
+
+ TP_printk("addr %llx pferr %x %s", __entry->addr, __entry->pferr,
+ __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
+);
+
+
+/* We just walked a paging element */
+TRACE_EVENT(
+ kvm_mmu_paging_element,
+ TP_PROTO(u64 pte, int level),
+ TP_ARGS(pte, level),
+
+ TP_STRUCT__entry(
+ __field(__u64, pte)
+ __field(__u32, level)
+ ),
+
+ TP_fast_assign(
+ __entry->pte = pte;
+ __entry->level = level;
+ ),
+
+ TP_printk("pte %llx level %u", __entry->pte, __entry->level)
+);
+
+/* We set a pte accessed bit */
+TRACE_EVENT(
+ kvm_mmu_set_accessed_bit,
+ TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+ TP_ARGS(table_gfn, index, size),
+
+ TP_STRUCT__entry(
+ __field(__u64, gpa)
+ ),
+
+ TP_fast_assign(
+ __entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
+ + index * size;
+ ),
+
+ TP_printk("gpa %llx", __entry->gpa)
+);
+
+/* We set a pte dirty bit */
+TRACE_EVENT(
+ kvm_mmu_set_dirty_bit,
+ TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+ TP_ARGS(table_gfn, index, size),
+
+ TP_STRUCT__entry(
+ __field(__u64, gpa)
+ ),
+
+ TP_fast_assign(
+ __entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
+ + index * size;
+ ),
+
+ TP_printk("gpa %llx", __entry->gpa)
+);
+
+TRACE_EVENT(
+ kvm_mmu_walker_error,
+ TP_PROTO(u32 pferr),
+ TP_ARGS(pferr),
+
+ TP_STRUCT__entry(
+ __field(__u32, pferr)
+ ),
+
+ TP_fast_assign(
+ __entry->pferr = pferr;
+ ),
+
+ TP_printk("pferr %x %s", __entry->pferr,
+ __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
+);
+
+TRACE_EVENT(
+ kvm_mmu_get_page,
+ TP_PROTO(struct kvm_mmu_page *sp, bool created),
+ TP_ARGS(sp, created),
+
+ TP_STRUCT__entry(
+ KVM_MMU_PAGE_FIELDS
+ __field(bool, created)
+ ),
+
+ TP_fast_assign(
+ KVM_MMU_PAGE_ASSIGN(sp)
+ __entry->created = created;
+ ),
+
+ TP_printk("%s %s", KVM_MMU_PAGE_PRINTK(),
+ __entry->created ? "new" : "existing")
+);
+
+TRACE_EVENT(
+ kvm_mmu_sync_page,
+ TP_PROTO(struct kvm_mmu_page *sp),
+ TP_ARGS(sp),
+
+ TP_STRUCT__entry(
+ KVM_MMU_PAGE_FIELDS
+ ),
+
+ TP_fast_assign(
+ KVM_MMU_PAGE_ASSIGN(sp)
+ ),
+
+ TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+TRACE_EVENT(
+ kvm_mmu_unsync_page,
+ TP_PROTO(struct kvm_mmu_page *sp),
+ TP_ARGS(sp),
+
+ TP_STRUCT__entry(
+ KVM_MMU_PAGE_FIELDS
+ ),
+
+ TP_fast_assign(
+ KVM_MMU_PAGE_ASSIGN(sp)
+ ),
+
+ TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+TRACE_EVENT(
+ kvm_mmu_zap_page,
+ TP_PROTO(struct kvm_mmu_page *sp),
+ TP_ARGS(sp),
+
+ TP_STRUCT__entry(
+ KVM_MMU_PAGE_FIELDS
+ ),
+
+ TP_fast_assign(
+ KVM_MMU_PAGE_ASSIGN(sp)
+ ),
+
+ TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+#endif /* _TRACE_KVMMMU_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 67785f6..d2fec9c 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -27,7 +27,8 @@
#define guest_walker guest_walker64
#define FNAME(name) paging##64_##name
#define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
- #define PT_DIR_BASE_ADDR_MASK PT64_DIR_BASE_ADDR_MASK
+ #define PT_LVL_ADDR_MASK(lvl) PT64_LVL_ADDR_MASK(lvl)
+ #define PT_LVL_OFFSET_MASK(lvl) PT64_LVL_OFFSET_MASK(lvl)
#define PT_INDEX(addr, level) PT64_INDEX(addr, level)
#define PT_LEVEL_MASK(level) PT64_LEVEL_MASK(level)
#define PT_LEVEL_BITS PT64_LEVEL_BITS
@@ -43,7 +44,8 @@
#define guest_walker guest_walker32
#define FNAME(name) paging##32_##name
#define PT_BASE_ADDR_MASK PT32_BASE_ADDR_MASK
- #define PT_DIR_BASE_ADDR_MASK PT32_DIR_BASE_ADDR_MASK
+ #define PT_LVL_ADDR_MASK(lvl) PT32_LVL_ADDR_MASK(lvl)
+ #define PT_LVL_OFFSET_MASK(lvl) PT32_LVL_OFFSET_MASK(lvl)
#define PT_INDEX(addr, level) PT32_INDEX(addr, level)
#define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
#define PT_LEVEL_BITS PT32_LEVEL_BITS
@@ -53,8 +55,8 @@
#error Invalid PTTYPE value
#endif
-#define gpte_to_gfn FNAME(gpte_to_gfn)
-#define gpte_to_gfn_pde FNAME(gpte_to_gfn_pde)
+#define gpte_to_gfn_lvl FNAME(gpte_to_gfn_lvl)
+#define gpte_to_gfn(pte) gpte_to_gfn_lvl((pte), PT_PAGE_TABLE_LEVEL)
/*
* The guest_walker structure emulates the behavior of the hardware page
@@ -71,14 +73,9 @@
u32 error_code;
};
-static gfn_t gpte_to_gfn(pt_element_t gpte)
+static gfn_t gpte_to_gfn_lvl(pt_element_t gpte, int lvl)
{
- return (gpte & PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
-}
-
-static gfn_t gpte_to_gfn_pde(pt_element_t gpte)
-{
- return (gpte & PT_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
+ return (gpte & PT_LVL_ADDR_MASK(lvl)) >> PAGE_SHIFT;
}
static bool FNAME(cmpxchg_gpte)(struct kvm *kvm,
@@ -125,14 +122,16 @@
gpa_t pte_gpa;
int rsvd_fault = 0;
- pgprintk("%s: addr %lx\n", __func__, addr);
+ trace_kvm_mmu_pagetable_walk(addr, write_fault, user_fault,
+ fetch_fault);
walk:
walker->level = vcpu->arch.mmu.root_level;
pte = vcpu->arch.cr3;
#if PTTYPE == 64
if (!is_long_mode(vcpu)) {
- pte = vcpu->arch.pdptrs[(addr >> 30) & 3];
- if (!is_present_pte(pte))
+ pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
+ trace_kvm_mmu_paging_element(pte, walker->level);
+ if (!is_present_gpte(pte))
goto not_present;
--walker->level;
}
@@ -150,12 +149,11 @@
pte_gpa += index * sizeof(pt_element_t);
walker->table_gfn[walker->level - 1] = table_gfn;
walker->pte_gpa[walker->level - 1] = pte_gpa;
- pgprintk("%s: table_gfn[%d] %lx\n", __func__,
- walker->level - 1, table_gfn);
kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
+ trace_kvm_mmu_paging_element(pte, walker->level);
- if (!is_present_pte(pte))
+ if (!is_present_gpte(pte))
goto not_present;
rsvd_fault = is_rsvd_bits_set(vcpu, pte, walker->level);
@@ -175,6 +173,8 @@
#endif
if (!(pte & PT_ACCESSED_MASK)) {
+ trace_kvm_mmu_set_accessed_bit(table_gfn, index,
+ sizeof(pte));
mark_page_dirty(vcpu->kvm, table_gfn);
if (FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn,
index, pte, pte|PT_ACCESSED_MASK))
@@ -186,18 +186,24 @@
walker->ptes[walker->level - 1] = pte;
- if (walker->level == PT_PAGE_TABLE_LEVEL) {
- walker->gfn = gpte_to_gfn(pte);
- break;
- }
+ if ((walker->level == PT_PAGE_TABLE_LEVEL) ||
+ ((walker->level == PT_DIRECTORY_LEVEL) &&
+ (pte & PT_PAGE_SIZE_MASK) &&
+ (PTTYPE == 64 || is_pse(vcpu))) ||
+ ((walker->level == PT_PDPE_LEVEL) &&
+ (pte & PT_PAGE_SIZE_MASK) &&
+ is_long_mode(vcpu))) {
+ int lvl = walker->level;
- if (walker->level == PT_DIRECTORY_LEVEL
- && (pte & PT_PAGE_SIZE_MASK)
- && (PTTYPE == 64 || is_pse(vcpu))) {
- walker->gfn = gpte_to_gfn_pde(pte);
- walker->gfn += PT_INDEX(addr, PT_PAGE_TABLE_LEVEL);
- if (PTTYPE == 32 && is_cpuid_PSE36())
+ walker->gfn = gpte_to_gfn_lvl(pte, lvl);
+ walker->gfn += (addr & PT_LVL_OFFSET_MASK(lvl))
+ >> PAGE_SHIFT;
+
+ if (PTTYPE == 32 &&
+ walker->level == PT_DIRECTORY_LEVEL &&
+ is_cpuid_PSE36())
walker->gfn += pse36_gfn_delta(pte);
+
break;
}
@@ -205,9 +211,10 @@
--walker->level;
}
- if (write_fault && !is_dirty_pte(pte)) {
+ if (write_fault && !is_dirty_gpte(pte)) {
bool ret;
+ trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
mark_page_dirty(vcpu->kvm, table_gfn);
ret = FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn, index, pte,
pte|PT_DIRTY_MASK);
@@ -239,6 +246,7 @@
walker->error_code |= PFERR_FETCH_MASK;
if (rsvd_fault)
walker->error_code |= PFERR_RSVD_MASK;
+ trace_kvm_mmu_walker_error(walker->error_code);
return 0;
}
@@ -248,12 +256,11 @@
pt_element_t gpte;
unsigned pte_access;
pfn_t pfn;
- int largepage = vcpu->arch.update_pte.largepage;
gpte = *(const pt_element_t *)pte;
if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
- if (!is_present_pte(gpte))
- set_shadow_pte(spte, shadow_notrap_nonpresent_pte);
+ if (!is_present_gpte(gpte))
+ __set_spte(spte, shadow_notrap_nonpresent_pte);
return;
}
pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
@@ -267,7 +274,7 @@
return;
kvm_get_pfn(pfn);
mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
- gpte & PT_DIRTY_MASK, NULL, largepage,
+ gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
gpte_to_gfn(gpte), pfn, true);
}
@@ -276,7 +283,7 @@
*/
static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
struct guest_walker *gw,
- int user_fault, int write_fault, int largepage,
+ int user_fault, int write_fault, int hlevel,
int *ptwrite, pfn_t pfn)
{
unsigned access = gw->pt_access;
@@ -289,19 +296,18 @@
pt_element_t curr_pte;
struct kvm_shadow_walk_iterator iterator;
- if (!is_present_pte(gw->ptes[gw->level - 1]))
+ if (!is_present_gpte(gw->ptes[gw->level - 1]))
return NULL;
for_each_shadow_entry(vcpu, addr, iterator) {
level = iterator.level;
sptep = iterator.sptep;
- if (level == PT_PAGE_TABLE_LEVEL
- || (largepage && level == PT_DIRECTORY_LEVEL)) {
+ if (iterator.level == hlevel) {
mmu_set_spte(vcpu, sptep, access,
gw->pte_access & access,
user_fault, write_fault,
gw->ptes[gw->level-1] & PT_DIRTY_MASK,
- ptwrite, largepage,
+ ptwrite, level,
gw->gfn, pfn, false);
break;
}
@@ -311,16 +317,19 @@
if (is_large_pte(*sptep)) {
rmap_remove(vcpu->kvm, sptep);
- set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+ __set_spte(sptep, shadow_trap_nonpresent_pte);
kvm_flush_remote_tlbs(vcpu->kvm);
}
- if (level == PT_DIRECTORY_LEVEL
- && gw->level == PT_DIRECTORY_LEVEL) {
+ if (level <= gw->level) {
+ int delta = level - gw->level + 1;
direct = 1;
- if (!is_dirty_pte(gw->ptes[level - 1]))
+ if (!is_dirty_gpte(gw->ptes[level - delta]))
access &= ~ACC_WRITE_MASK;
- table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
+ table_gfn = gpte_to_gfn(gw->ptes[level - delta]);
+ /* advance table_gfn when emulating 1gb pages with 4k */
+ if (delta == 0)
+ table_gfn += PT_INDEX(addr, level);
} else {
direct = 0;
table_gfn = gw->table_gfn[level - 2];
@@ -369,11 +378,11 @@
int user_fault = error_code & PFERR_USER_MASK;
int fetch_fault = error_code & PFERR_FETCH_MASK;
struct guest_walker walker;
- u64 *shadow_pte;
+ u64 *sptep;
int write_pt = 0;
int r;
pfn_t pfn;
- int largepage = 0;
+ int level = PT_PAGE_TABLE_LEVEL;
unsigned long mmu_seq;
pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
@@ -399,14 +408,11 @@
return 0;
}
- if (walker.level == PT_DIRECTORY_LEVEL) {
- gfn_t large_gfn;
- large_gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE-1);
- if (is_largepage_backed(vcpu, large_gfn)) {
- walker.gfn = large_gfn;
- largepage = 1;
- }
+ if (walker.level >= PT_DIRECTORY_LEVEL) {
+ level = min(walker.level, mapping_level(vcpu, walker.gfn));
+ walker.gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE(level) - 1);
}
+
mmu_seq = vcpu->kvm->mmu_notifier_seq;
smp_rmb();
pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
@@ -422,11 +428,10 @@
if (mmu_notifier_retry(vcpu, mmu_seq))
goto out_unlock;
kvm_mmu_free_some_pages(vcpu);
- shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
- largepage, &write_pt, pfn);
-
+ sptep = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
+ level, &write_pt, pfn);
pgprintk("%s: shadow pte %p %llx ptwrite %d\n", __func__,
- shadow_pte, *shadow_pte, write_pt);
+ sptep, *sptep, write_pt);
if (!write_pt)
vcpu->arch.last_pt_write_count = 0; /* reset fork detector */
@@ -459,8 +464,9 @@
sptep = iterator.sptep;
/* FIXME: properly handle invlpg on large guest pages */
- if (level == PT_PAGE_TABLE_LEVEL ||
- ((level == PT_DIRECTORY_LEVEL) && is_large_pte(*sptep))) {
+ if (level == PT_PAGE_TABLE_LEVEL ||
+ ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
+ ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
struct kvm_mmu_page *sp = page_header(__pa(sptep));
pte_gpa = (sp->gfn << PAGE_SHIFT);
@@ -472,7 +478,7 @@
--vcpu->kvm->stat.lpages;
need_flush = 1;
}
- set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+ __set_spte(sptep, shadow_trap_nonpresent_pte);
break;
}
@@ -489,7 +495,7 @@
if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
sizeof(pt_element_t)))
return;
- if (is_present_pte(gpte) && (gpte & PT_ACCESSED_MASK)) {
+ if (is_present_gpte(gpte) && (gpte & PT_ACCESSED_MASK)) {
if (mmu_topup_memory_caches(vcpu))
return;
kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte,
@@ -536,7 +542,7 @@
r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
for (j = 0; j < ARRAY_SIZE(pt); ++j)
- if (r || is_present_pte(pt[j]))
+ if (r || is_present_gpte(pt[j]))
sp->spt[i+j] = shadow_trap_nonpresent_pte;
else
sp->spt[i+j] = shadow_notrap_nonpresent_pte;
@@ -574,23 +580,23 @@
sizeof(pt_element_t)))
return -EINVAL;
- if (gpte_to_gfn(gpte) != gfn || !is_present_pte(gpte) ||
+ if (gpte_to_gfn(gpte) != gfn || !is_present_gpte(gpte) ||
!(gpte & PT_ACCESSED_MASK)) {
u64 nonpresent;
rmap_remove(vcpu->kvm, &sp->spt[i]);
- if (is_present_pte(gpte))
+ if (is_present_gpte(gpte))
nonpresent = shadow_trap_nonpresent_pte;
else
nonpresent = shadow_notrap_nonpresent_pte;
- set_shadow_pte(&sp->spt[i], nonpresent);
+ __set_spte(&sp->spt[i], nonpresent);
continue;
}
nr_present++;
pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
- is_dirty_pte(gpte), 0, gfn,
+ is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn,
spte_to_pfn(sp->spt[i]), true, false);
}
@@ -603,9 +609,10 @@
#undef PT_BASE_ADDR_MASK
#undef PT_INDEX
#undef PT_LEVEL_MASK
-#undef PT_DIR_BASE_ADDR_MASK
+#undef PT_LVL_ADDR_MASK
+#undef PT_LVL_OFFSET_MASK
#undef PT_LEVEL_BITS
#undef PT_MAX_FULL_LEVELS
#undef gpte_to_gfn
-#undef gpte_to_gfn_pde
+#undef gpte_to_gfn_lvl
#undef CMPXCHG
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b1f658a..944cc9c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -15,7 +15,6 @@
*/
#include <linux/kvm_host.h>
-#include "kvm_svm.h"
#include "irq.h"
#include "mmu.h"
#include "kvm_cache_regs.h"
@@ -26,10 +25,12 @@
#include <linux/vmalloc.h>
#include <linux/highmem.h>
#include <linux/sched.h>
+#include <linux/ftrace_event.h>
#include <asm/desc.h>
#include <asm/virtext.h>
+#include "trace.h"
#define __ex(x) __kvm_handle_fault_on_reboot(x)
@@ -46,6 +47,10 @@
#define SVM_FEATURE_LBRV (1 << 1)
#define SVM_FEATURE_SVML (1 << 2)
+#define NESTED_EXIT_HOST 0 /* Exit handled on host level */
+#define NESTED_EXIT_DONE 1 /* Exit caused nested vmexit */
+#define NESTED_EXIT_CONTINUE 2 /* Further checks needed */
+
#define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
/* Turn on to get debugging output*/
@@ -57,6 +62,58 @@
#define nsvm_printk(fmt, args...) do {} while(0)
#endif
+static const u32 host_save_user_msrs[] = {
+#ifdef CONFIG_X86_64
+ MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
+ MSR_FS_BASE,
+#endif
+ MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
+};
+
+#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
+
+struct kvm_vcpu;
+
+struct nested_state {
+ struct vmcb *hsave;
+ u64 hsave_msr;
+ u64 vmcb;
+
+ /* These are the merged vectors */
+ u32 *msrpm;
+
+ /* gpa pointers to the real vectors */
+ u64 vmcb_msrpm;
+
+ /* cache for intercepts of the guest */
+ u16 intercept_cr_read;
+ u16 intercept_cr_write;
+ u16 intercept_dr_read;
+ u16 intercept_dr_write;
+ u32 intercept_exceptions;
+ u64 intercept;
+
+};
+
+struct vcpu_svm {
+ struct kvm_vcpu vcpu;
+ struct vmcb *vmcb;
+ unsigned long vmcb_pa;
+ struct svm_cpu_data *svm_data;
+ uint64_t asid_generation;
+ uint64_t sysenter_esp;
+ uint64_t sysenter_eip;
+
+ u64 next_rip;
+
+ u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
+ u64 host_gs_base;
+
+ u32 *msrpm;
+
+ struct nested_state nested;
+};
+
/* enable NPT for AMD64 and X86 with PAE */
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
static bool npt_enabled = true;
@@ -67,15 +124,14 @@
module_param(npt, int, S_IRUGO);
-static int nested = 0;
+static int nested = 1;
module_param(nested, int, S_IRUGO);
static void svm_flush_tlb(struct kvm_vcpu *vcpu);
+static void svm_complete_interrupts(struct vcpu_svm *svm);
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
+static int nested_svm_exit_handled(struct vcpu_svm *svm);
static int nested_svm_vmexit(struct vcpu_svm *svm);
-static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
- void *arg2, void *opaque);
static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
bool has_error_code, u32 error_code);
@@ -86,7 +142,22 @@
static inline bool is_nested(struct vcpu_svm *svm)
{
- return svm->nested_vmcb;
+ return svm->nested.vmcb;
+}
+
+static inline void enable_gif(struct vcpu_svm *svm)
+{
+ svm->vcpu.arch.hflags |= HF_GIF_MASK;
+}
+
+static inline void disable_gif(struct vcpu_svm *svm)
+{
+ svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+}
+
+static inline bool gif_set(struct vcpu_svm *svm)
+{
+ return !!(svm->vcpu.arch.hflags & HF_GIF_MASK);
}
static unsigned long iopm_base;
@@ -147,19 +218,6 @@
asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
}
-static inline unsigned long kvm_read_cr2(void)
-{
- unsigned long cr2;
-
- asm volatile ("mov %%cr2, %0" : "=r" (cr2));
- return cr2;
-}
-
-static inline void kvm_write_cr2(unsigned long val)
-{
- asm volatile ("mov %0, %%cr2" :: "r" (val));
-}
-
static inline void force_new_asid(struct kvm_vcpu *vcpu)
{
to_svm(vcpu)->asid_generation--;
@@ -263,7 +321,7 @@
struct svm_cpu_data *svm_data;
uint64_t efer;
- struct desc_ptr gdt_descr;
+ struct descriptor_table gdt_descr;
struct desc_struct *gdt;
int me = raw_smp_processor_id();
@@ -283,8 +341,8 @@
svm_data->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1;
svm_data->next_asid = svm_data->max_asid + 1;
- asm volatile ("sgdt %0" : "=m"(gdt_descr));
- gdt = (struct desc_struct *)gdt_descr.address;
+ kvm_get_gdt(&gdt_descr);
+ gdt = (struct desc_struct *)gdt_descr.base;
svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
rdmsrl(MSR_EFER, efer);
@@ -367,8 +425,6 @@
#endif
set_msr_interception(msrpm, MSR_K6_STAR, 1, 1);
set_msr_interception(msrpm, MSR_IA32_SYSENTER_CS, 1, 1);
- set_msr_interception(msrpm, MSR_IA32_SYSENTER_ESP, 1, 1);
- set_msr_interception(msrpm, MSR_IA32_SYSENTER_EIP, 1, 1);
}
static void svm_enable_lbrv(struct vcpu_svm *svm)
@@ -595,8 +651,10 @@
}
force_new_asid(&svm->vcpu);
- svm->nested_vmcb = 0;
- svm->vcpu.arch.hflags = HF_GIF_MASK;
+ svm->nested.vmcb = 0;
+ svm->vcpu.arch.hflags = 0;
+
+ enable_gif(svm);
}
static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
@@ -605,7 +663,7 @@
init_vmcb(svm);
- if (vcpu->vcpu_id != 0) {
+ if (!kvm_vcpu_is_bsp(vcpu)) {
kvm_rip_write(vcpu, 0);
svm->vmcb->save.cs.base = svm->vcpu.arch.sipi_vector << 12;
svm->vmcb->save.cs.selector = svm->vcpu.arch.sipi_vector << 8;
@@ -656,9 +714,9 @@
hsave_page = alloc_page(GFP_KERNEL);
if (!hsave_page)
goto uninit;
- svm->hsave = page_address(hsave_page);
+ svm->nested.hsave = page_address(hsave_page);
- svm->nested_msrpm = page_address(nested_msrpm_pages);
+ svm->nested.msrpm = page_address(nested_msrpm_pages);
svm->vmcb = page_address(page);
clear_page(svm->vmcb);
@@ -669,7 +727,7 @@
fx_init(&svm->vcpu);
svm->vcpu.fpu_active = 1;
svm->vcpu.arch.apic_base = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
- if (svm->vcpu.vcpu_id == 0)
+ if (kvm_vcpu_is_bsp(&svm->vcpu))
svm->vcpu.arch.apic_base |= MSR_IA32_APICBASE_BSP;
return &svm->vcpu;
@@ -688,8 +746,8 @@
__free_page(pfn_to_page(svm->vmcb_pa >> PAGE_SHIFT));
__free_pages(virt_to_page(svm->msrpm), MSRPM_ALLOC_ORDER);
- __free_page(virt_to_page(svm->hsave));
- __free_pages(virt_to_page(svm->nested_msrpm), MSRPM_ALLOC_ORDER);
+ __free_page(virt_to_page(svm->nested.hsave));
+ __free_pages(virt_to_page(svm->nested.msrpm), MSRPM_ALLOC_ORDER);
kvm_vcpu_uninit(vcpu);
kmem_cache_free(kvm_vcpu_cache, svm);
}
@@ -740,6 +798,18 @@
to_svm(vcpu)->vmcb->save.rflags = rflags;
}
+static void svm_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
+{
+ switch (reg) {
+ case VCPU_EXREG_PDPTR:
+ BUG_ON(!npt_enabled);
+ load_pdptrs(vcpu, vcpu->arch.cr3);
+ break;
+ default:
+ BUG();
+ }
+}
+
static void svm_set_vintr(struct vcpu_svm *svm)
{
svm->vmcb->control.intercept |= 1ULL << INTERCEPT_VINTR;
@@ -1061,7 +1131,6 @@
val = 0;
}
- KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
return val;
}
@@ -1070,8 +1139,6 @@
{
struct vcpu_svm *svm = to_svm(vcpu);
- KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)value, handler);
-
*exception = 0;
switch (dr) {
@@ -1119,25 +1186,9 @@
fault_address = svm->vmcb->control.exit_info_2;
error_code = svm->vmcb->control.exit_info_1;
- if (!npt_enabled)
- KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
- (u32)fault_address, (u32)(fault_address >> 32),
- handler);
- else
- KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
- (u32)fault_address, (u32)(fault_address >> 32),
- handler);
- /*
- * FIXME: Tis shouldn't be necessary here, but there is a flush
- * missing in the MMU code. Until we find this bug, flush the
- * complete TLB here on an NPF
- */
- if (npt_enabled)
- svm_flush_tlb(&svm->vcpu);
- else {
- if (kvm_event_needs_reinjection(&svm->vcpu))
- kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
- }
+ trace_kvm_page_fault(fault_address, error_code);
+ if (!npt_enabled && kvm_event_needs_reinjection(&svm->vcpu))
+ kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
}
@@ -1253,14 +1304,12 @@
static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
{
- KVMTRACE_0D(NMI, &svm->vcpu, handler);
return 1;
}
static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
{
++svm->vcpu.stat.irq_exits;
- KVMTRACE_0D(INTR, &svm->vcpu, handler);
return 1;
}
@@ -1303,44 +1352,39 @@
static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
bool has_error_code, u32 error_code)
{
- if (is_nested(svm)) {
- svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
- svm->vmcb->control.exit_code_hi = 0;
- svm->vmcb->control.exit_info_1 = error_code;
- svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
- if (nested_svm_exit_handled(svm, false)) {
- nsvm_printk("VMexit -> EXCP 0x%x\n", nr);
+ if (!is_nested(svm))
+ return 0;
- nested_svm_vmexit(svm);
- return 1;
- }
- }
+ svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
+ svm->vmcb->control.exit_code_hi = 0;
+ svm->vmcb->control.exit_info_1 = error_code;
+ svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
- return 0;
+ return nested_svm_exit_handled(svm);
}
static inline int nested_svm_intr(struct vcpu_svm *svm)
{
- if (is_nested(svm)) {
- if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
- return 0;
+ if (!is_nested(svm))
+ return 0;
- if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
- return 0;
+ if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
+ return 0;
- svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+ if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
+ return 0;
- if (nested_svm_exit_handled(svm, false)) {
- nsvm_printk("VMexit -> INTR\n");
- nested_svm_vmexit(svm);
- return 1;
- }
+ svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+
+ if (nested_svm_exit_handled(svm)) {
+ nsvm_printk("VMexit -> INTR\n");
+ return 1;
}
return 0;
}
-static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
+static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, enum km_type idx)
{
struct page *page;
@@ -1348,143 +1392,48 @@
page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
up_read(¤t->mm->mmap_sem);
- if (is_error_page(page)) {
- printk(KERN_INFO "%s: could not find page at 0x%llx\n",
- __func__, gpa);
- kvm_release_page_clean(page);
- kvm_inject_gp(&svm->vcpu, 0);
- return NULL;
- }
- return page;
+ if (is_error_page(page))
+ goto error;
+
+ return kmap_atomic(page, idx);
+
+error:
+ kvm_release_page_clean(page);
+ kvm_inject_gp(&svm->vcpu, 0);
+
+ return NULL;
}
-static int nested_svm_do(struct vcpu_svm *svm,
- u64 arg1_gpa, u64 arg2_gpa, void *opaque,
- int (*handler)(struct vcpu_svm *svm,
- void *arg1,
- void *arg2,
- void *opaque))
+static void nested_svm_unmap(void *addr, enum km_type idx)
{
- struct page *arg1_page;
- struct page *arg2_page = NULL;
- void *arg1;
- void *arg2 = NULL;
- int retval;
+ struct page *page;
- arg1_page = nested_svm_get_page(svm, arg1_gpa);
- if(arg1_page == NULL)
- return 1;
+ if (!addr)
+ return;
- if (arg2_gpa) {
- arg2_page = nested_svm_get_page(svm, arg2_gpa);
- if(arg2_page == NULL) {
- kvm_release_page_clean(arg1_page);
- return 1;
- }
- }
+ page = kmap_atomic_to_page(addr);
- arg1 = kmap_atomic(arg1_page, KM_USER0);
- if (arg2_gpa)
- arg2 = kmap_atomic(arg2_page, KM_USER1);
-
- retval = handler(svm, arg1, arg2, opaque);
-
- kunmap_atomic(arg1, KM_USER0);
- if (arg2_gpa)
- kunmap_atomic(arg2, KM_USER1);
-
- kvm_release_page_dirty(arg1_page);
- if (arg2_gpa)
- kvm_release_page_dirty(arg2_page);
-
- return retval;
+ kunmap_atomic(addr, idx);
+ kvm_release_page_dirty(page);
}
-static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
- void *arg1,
- void *arg2,
- void *opaque)
+static bool nested_svm_exit_handled_msr(struct vcpu_svm *svm)
{
- struct vmcb *nested_vmcb = (struct vmcb *)arg1;
- bool kvm_overrides = *(bool *)opaque;
- u32 exit_code = svm->vmcb->control.exit_code;
-
- if (kvm_overrides) {
- switch (exit_code) {
- case SVM_EXIT_INTR:
- case SVM_EXIT_NMI:
- return 0;
- /* For now we are always handling NPFs when using them */
- case SVM_EXIT_NPF:
- if (npt_enabled)
- return 0;
- break;
- /* When we're shadowing, trap PFs */
- case SVM_EXIT_EXCP_BASE + PF_VECTOR:
- if (!npt_enabled)
- return 0;
- break;
- default:
- break;
- }
- }
-
- switch (exit_code) {
- case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
- u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
- if (nested_vmcb->control.intercept_cr_read & cr_bits)
- return 1;
- break;
- }
- case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
- u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
- if (nested_vmcb->control.intercept_cr_write & cr_bits)
- return 1;
- break;
- }
- case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
- u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
- if (nested_vmcb->control.intercept_dr_read & dr_bits)
- return 1;
- break;
- }
- case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
- u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
- if (nested_vmcb->control.intercept_dr_write & dr_bits)
- return 1;
- break;
- }
- case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
- u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
- if (nested_vmcb->control.intercept_exceptions & excp_bits)
- return 1;
- break;
- }
- default: {
- u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
- nsvm_printk("exit code: 0x%x\n", exit_code);
- if (nested_vmcb->control.intercept & exit_bits)
- return 1;
- }
- }
-
- return 0;
-}
-
-static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
- void *arg1, void *arg2,
- void *opaque)
-{
- struct vmcb *nested_vmcb = (struct vmcb *)arg1;
- u8 *msrpm = (u8 *)arg2;
- u32 t0, t1;
- u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
u32 param = svm->vmcb->control.exit_info_1 & 1;
+ u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+ bool ret = false;
+ u32 t0, t1;
+ u8 *msrpm;
- if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
- return 0;
+ if (!(svm->nested.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+ return false;
- switch(msr) {
+ msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+
+ if (!msrpm)
+ goto out;
+
+ switch (msr) {
case 0 ... 0x1fff:
t0 = (msr * 2) % 8;
t1 = msr / 8;
@@ -1500,84 +1449,189 @@
t0 %= 8;
break;
default:
- return 1;
+ ret = true;
+ goto out;
+ }
+
+ ret = msrpm[t1] & ((1 << param) << t0);
+
+out:
+ nested_svm_unmap(msrpm, KM_USER0);
+
+ return ret;
+}
+
+static int nested_svm_exit_special(struct vcpu_svm *svm)
+{
+ u32 exit_code = svm->vmcb->control.exit_code;
+
+ switch (exit_code) {
+ case SVM_EXIT_INTR:
+ case SVM_EXIT_NMI:
+ return NESTED_EXIT_HOST;
+ /* For now we are always handling NPFs when using them */
+ case SVM_EXIT_NPF:
+ if (npt_enabled)
+ return NESTED_EXIT_HOST;
+ break;
+ /* When we're shadowing, trap PFs */
+ case SVM_EXIT_EXCP_BASE + PF_VECTOR:
+ if (!npt_enabled)
+ return NESTED_EXIT_HOST;
+ break;
+ default:
break;
}
- if (msrpm[t1] & ((1 << param) << t0))
- return 1;
- return 0;
+ return NESTED_EXIT_CONTINUE;
}
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
+/*
+ * If this function returns true, this #vmexit was already handled
+ */
+static int nested_svm_exit_handled(struct vcpu_svm *svm)
{
- bool k = kvm_override;
+ u32 exit_code = svm->vmcb->control.exit_code;
+ int vmexit = NESTED_EXIT_HOST;
- switch (svm->vmcb->control.exit_code) {
+ switch (exit_code) {
case SVM_EXIT_MSR:
- return nested_svm_do(svm, svm->nested_vmcb,
- svm->nested_vmcb_msrpm, NULL,
- nested_svm_exit_handled_msr);
- default: break;
+ vmexit = nested_svm_exit_handled_msr(svm);
+ break;
+ case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
+ u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
+ if (svm->nested.intercept_cr_read & cr_bits)
+ vmexit = NESTED_EXIT_DONE;
+ break;
+ }
+ case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
+ u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
+ if (svm->nested.intercept_cr_write & cr_bits)
+ vmexit = NESTED_EXIT_DONE;
+ break;
+ }
+ case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
+ u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
+ if (svm->nested.intercept_dr_read & dr_bits)
+ vmexit = NESTED_EXIT_DONE;
+ break;
+ }
+ case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
+ u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
+ if (svm->nested.intercept_dr_write & dr_bits)
+ vmexit = NESTED_EXIT_DONE;
+ break;
+ }
+ case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
+ u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
+ if (svm->nested.intercept_exceptions & excp_bits)
+ vmexit = NESTED_EXIT_DONE;
+ break;
+ }
+ default: {
+ u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
+ nsvm_printk("exit code: 0x%x\n", exit_code);
+ if (svm->nested.intercept & exit_bits)
+ vmexit = NESTED_EXIT_DONE;
+ }
}
- return nested_svm_do(svm, svm->nested_vmcb, 0, &k,
- nested_svm_exit_handled_real);
+ if (vmexit == NESTED_EXIT_DONE) {
+ nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
+ nested_svm_vmexit(svm);
+ }
+
+ return vmexit;
}
-static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
- void *arg2, void *opaque)
+static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
{
- struct vmcb *nested_vmcb = (struct vmcb *)arg1;
- struct vmcb *hsave = svm->hsave;
- u64 nested_save[] = { nested_vmcb->save.cr0,
- nested_vmcb->save.cr3,
- nested_vmcb->save.cr4,
- nested_vmcb->save.efer,
- nested_vmcb->control.intercept_cr_read,
- nested_vmcb->control.intercept_cr_write,
- nested_vmcb->control.intercept_dr_read,
- nested_vmcb->control.intercept_dr_write,
- nested_vmcb->control.intercept_exceptions,
- nested_vmcb->control.intercept,
- nested_vmcb->control.msrpm_base_pa,
- nested_vmcb->control.iopm_base_pa,
- nested_vmcb->control.tsc_offset };
+ struct vmcb_control_area *dst = &dst_vmcb->control;
+ struct vmcb_control_area *from = &from_vmcb->control;
+
+ dst->intercept_cr_read = from->intercept_cr_read;
+ dst->intercept_cr_write = from->intercept_cr_write;
+ dst->intercept_dr_read = from->intercept_dr_read;
+ dst->intercept_dr_write = from->intercept_dr_write;
+ dst->intercept_exceptions = from->intercept_exceptions;
+ dst->intercept = from->intercept;
+ dst->iopm_base_pa = from->iopm_base_pa;
+ dst->msrpm_base_pa = from->msrpm_base_pa;
+ dst->tsc_offset = from->tsc_offset;
+ dst->asid = from->asid;
+ dst->tlb_ctl = from->tlb_ctl;
+ dst->int_ctl = from->int_ctl;
+ dst->int_vector = from->int_vector;
+ dst->int_state = from->int_state;
+ dst->exit_code = from->exit_code;
+ dst->exit_code_hi = from->exit_code_hi;
+ dst->exit_info_1 = from->exit_info_1;
+ dst->exit_info_2 = from->exit_info_2;
+ dst->exit_int_info = from->exit_int_info;
+ dst->exit_int_info_err = from->exit_int_info_err;
+ dst->nested_ctl = from->nested_ctl;
+ dst->event_inj = from->event_inj;
+ dst->event_inj_err = from->event_inj_err;
+ dst->nested_cr3 = from->nested_cr3;
+ dst->lbr_ctl = from->lbr_ctl;
+}
+
+static int nested_svm_vmexit(struct vcpu_svm *svm)
+{
+ struct vmcb *nested_vmcb;
+ struct vmcb *hsave = svm->nested.hsave;
+ struct vmcb *vmcb = svm->vmcb;
+
+ nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, KM_USER0);
+ if (!nested_vmcb)
+ return 1;
/* Give the current vmcb to the guest */
- memcpy(nested_vmcb, svm->vmcb, sizeof(struct vmcb));
- nested_vmcb->save.cr0 = nested_save[0];
- if (!npt_enabled)
- nested_vmcb->save.cr3 = nested_save[1];
- nested_vmcb->save.cr4 = nested_save[2];
- nested_vmcb->save.efer = nested_save[3];
- nested_vmcb->control.intercept_cr_read = nested_save[4];
- nested_vmcb->control.intercept_cr_write = nested_save[5];
- nested_vmcb->control.intercept_dr_read = nested_save[6];
- nested_vmcb->control.intercept_dr_write = nested_save[7];
- nested_vmcb->control.intercept_exceptions = nested_save[8];
- nested_vmcb->control.intercept = nested_save[9];
- nested_vmcb->control.msrpm_base_pa = nested_save[10];
- nested_vmcb->control.iopm_base_pa = nested_save[11];
- nested_vmcb->control.tsc_offset = nested_save[12];
+ disable_gif(svm);
+
+ nested_vmcb->save.es = vmcb->save.es;
+ nested_vmcb->save.cs = vmcb->save.cs;
+ nested_vmcb->save.ss = vmcb->save.ss;
+ nested_vmcb->save.ds = vmcb->save.ds;
+ nested_vmcb->save.gdtr = vmcb->save.gdtr;
+ nested_vmcb->save.idtr = vmcb->save.idtr;
+ if (npt_enabled)
+ nested_vmcb->save.cr3 = vmcb->save.cr3;
+ nested_vmcb->save.cr2 = vmcb->save.cr2;
+ nested_vmcb->save.rflags = vmcb->save.rflags;
+ nested_vmcb->save.rip = vmcb->save.rip;
+ nested_vmcb->save.rsp = vmcb->save.rsp;
+ nested_vmcb->save.rax = vmcb->save.rax;
+ nested_vmcb->save.dr7 = vmcb->save.dr7;
+ nested_vmcb->save.dr6 = vmcb->save.dr6;
+ nested_vmcb->save.cpl = vmcb->save.cpl;
+
+ nested_vmcb->control.int_ctl = vmcb->control.int_ctl;
+ nested_vmcb->control.int_vector = vmcb->control.int_vector;
+ nested_vmcb->control.int_state = vmcb->control.int_state;
+ nested_vmcb->control.exit_code = vmcb->control.exit_code;
+ nested_vmcb->control.exit_code_hi = vmcb->control.exit_code_hi;
+ nested_vmcb->control.exit_info_1 = vmcb->control.exit_info_1;
+ nested_vmcb->control.exit_info_2 = vmcb->control.exit_info_2;
+ nested_vmcb->control.exit_int_info = vmcb->control.exit_int_info;
+ nested_vmcb->control.exit_int_info_err = vmcb->control.exit_int_info_err;
+ nested_vmcb->control.tlb_ctl = 0;
+ nested_vmcb->control.event_inj = 0;
+ nested_vmcb->control.event_inj_err = 0;
/* We always set V_INTR_MASKING and remember the old value in hflags */
if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
nested_vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK;
- if ((nested_vmcb->control.int_ctl & V_IRQ_MASK) &&
- (nested_vmcb->control.int_vector)) {
- nsvm_printk("WARNING: IRQ 0x%x still enabled on #VMEXIT\n",
- nested_vmcb->control.int_vector);
- }
-
/* Restore the original control entries */
- svm->vmcb->control = hsave->control;
+ copy_vmcb_control_area(vmcb, hsave);
/* Kill any pending exceptions */
if (svm->vcpu.arch.exception.pending == true)
nsvm_printk("WARNING: Pending Exception\n");
- svm->vcpu.arch.exception.pending = false;
+
+ kvm_clear_exception_queue(&svm->vcpu);
+ kvm_clear_interrupt_queue(&svm->vcpu);
/* Restore selected save entries */
svm->vmcb->save.es = hsave->save.es;
@@ -1603,19 +1657,10 @@
svm->vmcb->save.cpl = 0;
svm->vmcb->control.exit_int_info = 0;
- svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
/* Exit nested SVM mode */
- svm->nested_vmcb = 0;
+ svm->nested.vmcb = 0;
- return 0;
-}
-
-static int nested_svm_vmexit(struct vcpu_svm *svm)
-{
- nsvm_printk("VMexit\n");
- if (nested_svm_do(svm, svm->nested_vmcb, 0,
- NULL, nested_svm_vmexit_real))
- return 1;
+ nested_svm_unmap(nested_vmcb, KM_USER0);
kvm_mmu_reset_context(&svm->vcpu);
kvm_mmu_load(&svm->vcpu);
@@ -1623,38 +1668,63 @@
return 0;
}
-static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
- void *arg2, void *opaque)
+static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
{
+ u32 *nested_msrpm;
int i;
- u32 *nested_msrpm = (u32*)arg1;
- for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
- svm->nested_msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
- svm->vmcb->control.msrpm_base_pa = __pa(svm->nested_msrpm);
- return 0;
+ nested_msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+ if (!nested_msrpm)
+ return false;
+
+ for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
+ svm->nested.msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+
+ svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
+
+ nested_svm_unmap(nested_msrpm, KM_USER0);
+
+ return true;
}
-static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
- void *arg2, void *opaque)
+static bool nested_svm_vmrun(struct vcpu_svm *svm)
{
- struct vmcb *nested_vmcb = (struct vmcb *)arg1;
- struct vmcb *hsave = svm->hsave;
+ struct vmcb *nested_vmcb;
+ struct vmcb *hsave = svm->nested.hsave;
+ struct vmcb *vmcb = svm->vmcb;
+
+ nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+ if (!nested_vmcb)
+ return false;
/* nested_vmcb is our indicator if nested SVM is activated */
- svm->nested_vmcb = svm->vmcb->save.rax;
+ svm->nested.vmcb = svm->vmcb->save.rax;
/* Clear internal status */
- svm->vcpu.arch.exception.pending = false;
+ kvm_clear_exception_queue(&svm->vcpu);
+ kvm_clear_interrupt_queue(&svm->vcpu);
/* Save the old vmcb, so we don't need to pick what we save, but
can restore everything when a VMEXIT occurs */
- memcpy(hsave, svm->vmcb, sizeof(struct vmcb));
- /* We need to remember the original CR3 in the SPT case */
- if (!npt_enabled)
- hsave->save.cr3 = svm->vcpu.arch.cr3;
- hsave->save.cr4 = svm->vcpu.arch.cr4;
- hsave->save.rip = svm->next_rip;
+ hsave->save.es = vmcb->save.es;
+ hsave->save.cs = vmcb->save.cs;
+ hsave->save.ss = vmcb->save.ss;
+ hsave->save.ds = vmcb->save.ds;
+ hsave->save.gdtr = vmcb->save.gdtr;
+ hsave->save.idtr = vmcb->save.idtr;
+ hsave->save.efer = svm->vcpu.arch.shadow_efer;
+ hsave->save.cr0 = svm->vcpu.arch.cr0;
+ hsave->save.cr4 = svm->vcpu.arch.cr4;
+ hsave->save.rflags = vmcb->save.rflags;
+ hsave->save.rip = svm->next_rip;
+ hsave->save.rsp = vmcb->save.rsp;
+ hsave->save.rax = vmcb->save.rax;
+ if (npt_enabled)
+ hsave->save.cr3 = vmcb->save.cr3;
+ else
+ hsave->save.cr3 = svm->vcpu.arch.cr3;
+
+ copy_vmcb_control_area(hsave, vmcb);
if (svm->vmcb->save.rflags & X86_EFLAGS_IF)
svm->vcpu.arch.hflags |= HF_HIF_MASK;
@@ -1679,7 +1749,7 @@
kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
kvm_mmu_reset_context(&svm->vcpu);
}
- svm->vmcb->save.cr2 = nested_vmcb->save.cr2;
+ svm->vmcb->save.cr2 = svm->vcpu.arch.cr2 = nested_vmcb->save.cr2;
kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, nested_vmcb->save.rax);
kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, nested_vmcb->save.rsp);
kvm_register_write(&svm->vcpu, VCPU_REGS_RIP, nested_vmcb->save.rip);
@@ -1706,7 +1776,15 @@
svm->vmcb->control.intercept |= nested_vmcb->control.intercept;
- svm->nested_vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
+ svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
+
+ /* cache intercepts */
+ svm->nested.intercept_cr_read = nested_vmcb->control.intercept_cr_read;
+ svm->nested.intercept_cr_write = nested_vmcb->control.intercept_cr_write;
+ svm->nested.intercept_dr_read = nested_vmcb->control.intercept_dr_read;
+ svm->nested.intercept_dr_write = nested_vmcb->control.intercept_dr_write;
+ svm->nested.intercept_exceptions = nested_vmcb->control.intercept_exceptions;
+ svm->nested.intercept = nested_vmcb->control.intercept;
force_new_asid(&svm->vcpu);
svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
@@ -1734,12 +1812,14 @@
svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
- svm->vcpu.arch.hflags |= HF_GIF_MASK;
+ nested_svm_unmap(nested_vmcb, KM_USER0);
- return 0;
+ enable_gif(svm);
+
+ return true;
}
-static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
+static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
{
to_vmcb->save.fs = from_vmcb->save.fs;
to_vmcb->save.gs = from_vmcb->save.gs;
@@ -1753,44 +1833,44 @@
to_vmcb->save.sysenter_cs = from_vmcb->save.sysenter_cs;
to_vmcb->save.sysenter_esp = from_vmcb->save.sysenter_esp;
to_vmcb->save.sysenter_eip = from_vmcb->save.sysenter_eip;
-
- return 1;
-}
-
-static int nested_svm_vmload(struct vcpu_svm *svm, void *nested_vmcb,
- void *arg2, void *opaque)
-{
- return nested_svm_vmloadsave((struct vmcb *)nested_vmcb, svm->vmcb);
-}
-
-static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
- void *arg2, void *opaque)
-{
- return nested_svm_vmloadsave(svm->vmcb, (struct vmcb *)nested_vmcb);
}
static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
{
+ struct vmcb *nested_vmcb;
+
if (nested_svm_check_permissions(svm))
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
skip_emulated_instruction(&svm->vcpu);
- nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmload);
+ nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+ if (!nested_vmcb)
+ return 1;
+
+ nested_svm_vmloadsave(nested_vmcb, svm->vmcb);
+ nested_svm_unmap(nested_vmcb, KM_USER0);
return 1;
}
static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
{
+ struct vmcb *nested_vmcb;
+
if (nested_svm_check_permissions(svm))
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
skip_emulated_instruction(&svm->vcpu);
- nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmsave);
+ nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+ if (!nested_vmcb)
+ return 1;
+
+ nested_svm_vmloadsave(svm->vmcb, nested_vmcb);
+ nested_svm_unmap(nested_vmcb, KM_USER0);
return 1;
}
@@ -1798,19 +1878,29 @@
static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
{
nsvm_printk("VMrun\n");
+
if (nested_svm_check_permissions(svm))
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
skip_emulated_instruction(&svm->vcpu);
- if (nested_svm_do(svm, svm->vmcb->save.rax, 0,
- NULL, nested_svm_vmrun))
+ if (!nested_svm_vmrun(svm))
return 1;
- if (nested_svm_do(svm, svm->nested_vmcb_msrpm, 0,
- NULL, nested_svm_vmrun_msrpm))
- return 1;
+ if (!nested_svm_vmrun_msrpm(svm))
+ goto failed;
+
+ return 1;
+
+failed:
+
+ svm->vmcb->control.exit_code = SVM_EXIT_ERR;
+ svm->vmcb->control.exit_code_hi = 0;
+ svm->vmcb->control.exit_info_1 = 0;
+ svm->vmcb->control.exit_info_2 = 0;
+
+ nested_svm_vmexit(svm);
return 1;
}
@@ -1823,7 +1913,7 @@
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
skip_emulated_instruction(&svm->vcpu);
- svm->vcpu.arch.hflags |= HF_GIF_MASK;
+ enable_gif(svm);
return 1;
}
@@ -1836,7 +1926,7 @@
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
skip_emulated_instruction(&svm->vcpu);
- svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+ disable_gif(svm);
/* After a CLGI no interrupts should come */
svm_clear_vintr(svm);
@@ -1845,6 +1935,19 @@
return 1;
}
+static int invlpga_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+ struct kvm_vcpu *vcpu = &svm->vcpu;
+ nsvm_printk("INVLPGA\n");
+
+ /* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
+ kvm_mmu_invlpg(vcpu, vcpu->arch.regs[VCPU_REGS_RAX]);
+
+ svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+ skip_emulated_instruction(&svm->vcpu);
+ return 1;
+}
+
static int invalid_op_interception(struct vcpu_svm *svm,
struct kvm_run *kvm_run)
{
@@ -1953,7 +2056,7 @@
struct vcpu_svm *svm = to_svm(vcpu);
switch (ecx) {
- case MSR_IA32_TIME_STAMP_COUNTER: {
+ case MSR_IA32_TSC: {
u64 tsc;
rdtscll(tsc);
@@ -1981,10 +2084,10 @@
*data = svm->vmcb->save.sysenter_cs;
break;
case MSR_IA32_SYSENTER_EIP:
- *data = svm->vmcb->save.sysenter_eip;
+ *data = svm->sysenter_eip;
break;
case MSR_IA32_SYSENTER_ESP:
- *data = svm->vmcb->save.sysenter_esp;
+ *data = svm->sysenter_esp;
break;
/* Nobody will change the following 5 values in the VMCB so
we can safely return them on rdmsr. They will always be 0
@@ -2005,7 +2108,7 @@
*data = svm->vmcb->save.last_excp_to;
break;
case MSR_VM_HSAVE_PA:
- *data = svm->hsave_msr;
+ *data = svm->nested.hsave_msr;
break;
case MSR_VM_CR:
*data = 0;
@@ -2027,8 +2130,7 @@
if (svm_get_msr(&svm->vcpu, ecx, &data))
kvm_inject_gp(&svm->vcpu, 0);
else {
- KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
- (u32)(data >> 32), handler);
+ trace_kvm_msr_read(ecx, data);
svm->vcpu.arch.regs[VCPU_REGS_RAX] = data & 0xffffffff;
svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
@@ -2043,7 +2145,7 @@
struct vcpu_svm *svm = to_svm(vcpu);
switch (ecx) {
- case MSR_IA32_TIME_STAMP_COUNTER: {
+ case MSR_IA32_TSC: {
u64 tsc;
rdtscll(tsc);
@@ -2071,9 +2173,11 @@
svm->vmcb->save.sysenter_cs = data;
break;
case MSR_IA32_SYSENTER_EIP:
+ svm->sysenter_eip = data;
svm->vmcb->save.sysenter_eip = data;
break;
case MSR_IA32_SYSENTER_ESP:
+ svm->sysenter_esp = data;
svm->vmcb->save.sysenter_esp = data;
break;
case MSR_IA32_DEBUGCTLMSR:
@@ -2091,24 +2195,12 @@
else
svm_disable_lbrv(svm);
break;
- case MSR_K7_EVNTSEL0:
- case MSR_K7_EVNTSEL1:
- case MSR_K7_EVNTSEL2:
- case MSR_K7_EVNTSEL3:
- case MSR_K7_PERFCTR0:
- case MSR_K7_PERFCTR1:
- case MSR_K7_PERFCTR2:
- case MSR_K7_PERFCTR3:
- /*
- * Just discard all writes to the performance counters; this
- * should keep both older linux and windows 64-bit guests
- * happy
- */
- pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
-
- break;
case MSR_VM_HSAVE_PA:
- svm->hsave_msr = data;
+ svm->nested.hsave_msr = data;
+ break;
+ case MSR_VM_CR:
+ case MSR_VM_IGNNE:
+ pr_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
break;
default:
return kvm_set_msr_common(vcpu, ecx, data);
@@ -2122,8 +2214,7 @@
u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
- KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
- handler);
+ trace_kvm_msr_write(ecx, data);
svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
if (svm_set_msr(&svm->vcpu, ecx, data))
@@ -2144,8 +2235,6 @@
static int interrupt_window_interception(struct vcpu_svm *svm,
struct kvm_run *kvm_run)
{
- KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
-
svm_clear_vintr(svm);
svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
/*
@@ -2201,7 +2290,7 @@
[SVM_EXIT_INVD] = emulate_on_interception,
[SVM_EXIT_HLT] = halt_interception,
[SVM_EXIT_INVLPG] = invlpg_interception,
- [SVM_EXIT_INVLPGA] = invalid_op_interception,
+ [SVM_EXIT_INVLPGA] = invlpga_interception,
[SVM_EXIT_IOIO] = io_interception,
[SVM_EXIT_MSR] = msr_interception,
[SVM_EXIT_TASK_SWITCH] = task_switch_interception,
@@ -2224,20 +2313,26 @@
struct vcpu_svm *svm = to_svm(vcpu);
u32 exit_code = svm->vmcb->control.exit_code;
- KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
- (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+ trace_kvm_exit(exit_code, svm->vmcb->save.rip);
if (is_nested(svm)) {
+ int vmexit;
+
nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
exit_code, svm->vmcb->control.exit_info_1,
svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
- if (nested_svm_exit_handled(svm, true)) {
- nested_svm_vmexit(svm);
- nsvm_printk("-> #VMEXIT\n");
+
+ vmexit = nested_svm_exit_special(svm);
+
+ if (vmexit == NESTED_EXIT_CONTINUE)
+ vmexit = nested_svm_exit_handled(svm);
+
+ if (vmexit == NESTED_EXIT_DONE)
return 1;
- }
}
+ svm_complete_interrupts(svm);
+
if (npt_enabled) {
int mmu_reload = 0;
if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -2246,12 +2341,6 @@
}
vcpu->arch.cr0 = svm->vmcb->save.cr0;
vcpu->arch.cr3 = svm->vmcb->save.cr3;
- if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
- if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
- kvm_inject_gp(vcpu, 0);
- return 1;
- }
- }
if (mmu_reload) {
kvm_mmu_reset_context(vcpu);
kvm_mmu_load(vcpu);
@@ -2319,7 +2408,7 @@
{
struct vmcb_control_area *control;
- KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+ trace_kvm_inj_virq(irq);
++svm->vcpu.stat.irq_injections;
control = &svm->vmcb->control;
@@ -2329,21 +2418,14 @@
((/*control->int_vector >> 4*/ 0xf) << V_INTR_PRIO_SHIFT);
}
-static void svm_queue_irq(struct kvm_vcpu *vcpu, unsigned nr)
-{
- struct vcpu_svm *svm = to_svm(vcpu);
-
- svm->vmcb->control.event_inj = nr |
- SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
-}
-
static void svm_set_irq(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
- nested_svm_intr(svm);
+ BUG_ON(!(gif_set(svm)));
- svm_queue_irq(vcpu, vcpu->arch.interrupt.nr);
+ svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
+ SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
}
static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
@@ -2371,13 +2453,25 @@
struct vmcb *vmcb = svm->vmcb;
return (vmcb->save.rflags & X86_EFLAGS_IF) &&
!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
- (svm->vcpu.arch.hflags & HF_GIF_MASK);
+ gif_set(svm) &&
+ !(is_nested(svm) && (svm->vcpu.arch.hflags & HF_VINTR_MASK));
}
static void enable_irq_window(struct kvm_vcpu *vcpu)
{
- svm_set_vintr(to_svm(vcpu));
- svm_inject_irq(to_svm(vcpu), 0x0);
+ struct vcpu_svm *svm = to_svm(vcpu);
+ nsvm_printk("Trying to open IRQ window\n");
+
+ nested_svm_intr(svm);
+
+ /* In case GIF=0 we can't rely on the CPU to tell us when
+ * GIF becomes 1, because that's a separate STGI/VMRUN intercept.
+ * The next time we get that intercept, this function will be
+ * called again though and we'll get the vintr intercept. */
+ if (gif_set(svm)) {
+ svm_set_vintr(svm);
+ svm_inject_irq(svm, 0x0);
+ }
}
static void enable_nmi_window(struct kvm_vcpu *vcpu)
@@ -2456,6 +2550,8 @@
case SVM_EXITINTINFO_TYPE_EXEPT:
/* In case of software exception do not reinject an exception
vector, but re-execute and instruction instead */
+ if (is_nested(svm))
+ break;
if (kvm_exception_is_soft(vector))
break;
if (exitintinfo & SVM_EXITINTINFO_VALID_ERR) {
@@ -2498,9 +2594,7 @@
fs_selector = kvm_read_fs();
gs_selector = kvm_read_gs();
ldt_selector = kvm_read_ldt();
- svm->host_cr2 = kvm_read_cr2();
- if (!is_nested(svm))
- svm->vmcb->save.cr2 = vcpu->arch.cr2;
+ svm->vmcb->save.cr2 = vcpu->arch.cr2;
/* required for live migration with NPT */
if (npt_enabled)
svm->vmcb->save.cr3 = vcpu->arch.cr3;
@@ -2585,8 +2679,6 @@
vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
- kvm_write_cr2(svm->host_cr2);
-
kvm_load_fs(fs_selector);
kvm_load_gs(gs_selector);
kvm_load_ldt(ldt_selector);
@@ -2602,7 +2694,10 @@
svm->next_rip = 0;
- svm_complete_interrupts(svm);
+ if (npt_enabled) {
+ vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
+ vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
+ }
}
#undef R
@@ -2673,6 +2768,64 @@
return 0;
}
+static const struct trace_print_flags svm_exit_reasons_str[] = {
+ { SVM_EXIT_READ_CR0, "read_cr0" },
+ { SVM_EXIT_READ_CR3, "read_cr3" },
+ { SVM_EXIT_READ_CR4, "read_cr4" },
+ { SVM_EXIT_READ_CR8, "read_cr8" },
+ { SVM_EXIT_WRITE_CR0, "write_cr0" },
+ { SVM_EXIT_WRITE_CR3, "write_cr3" },
+ { SVM_EXIT_WRITE_CR4, "write_cr4" },
+ { SVM_EXIT_WRITE_CR8, "write_cr8" },
+ { SVM_EXIT_READ_DR0, "read_dr0" },
+ { SVM_EXIT_READ_DR1, "read_dr1" },
+ { SVM_EXIT_READ_DR2, "read_dr2" },
+ { SVM_EXIT_READ_DR3, "read_dr3" },
+ { SVM_EXIT_WRITE_DR0, "write_dr0" },
+ { SVM_EXIT_WRITE_DR1, "write_dr1" },
+ { SVM_EXIT_WRITE_DR2, "write_dr2" },
+ { SVM_EXIT_WRITE_DR3, "write_dr3" },
+ { SVM_EXIT_WRITE_DR5, "write_dr5" },
+ { SVM_EXIT_WRITE_DR7, "write_dr7" },
+ { SVM_EXIT_EXCP_BASE + DB_VECTOR, "DB excp" },
+ { SVM_EXIT_EXCP_BASE + BP_VECTOR, "BP excp" },
+ { SVM_EXIT_EXCP_BASE + UD_VECTOR, "UD excp" },
+ { SVM_EXIT_EXCP_BASE + PF_VECTOR, "PF excp" },
+ { SVM_EXIT_EXCP_BASE + NM_VECTOR, "NM excp" },
+ { SVM_EXIT_EXCP_BASE + MC_VECTOR, "MC excp" },
+ { SVM_EXIT_INTR, "interrupt" },
+ { SVM_EXIT_NMI, "nmi" },
+ { SVM_EXIT_SMI, "smi" },
+ { SVM_EXIT_INIT, "init" },
+ { SVM_EXIT_VINTR, "vintr" },
+ { SVM_EXIT_CPUID, "cpuid" },
+ { SVM_EXIT_INVD, "invd" },
+ { SVM_EXIT_HLT, "hlt" },
+ { SVM_EXIT_INVLPG, "invlpg" },
+ { SVM_EXIT_INVLPGA, "invlpga" },
+ { SVM_EXIT_IOIO, "io" },
+ { SVM_EXIT_MSR, "msr" },
+ { SVM_EXIT_TASK_SWITCH, "task_switch" },
+ { SVM_EXIT_SHUTDOWN, "shutdown" },
+ { SVM_EXIT_VMRUN, "vmrun" },
+ { SVM_EXIT_VMMCALL, "hypercall" },
+ { SVM_EXIT_VMLOAD, "vmload" },
+ { SVM_EXIT_VMSAVE, "vmsave" },
+ { SVM_EXIT_STGI, "stgi" },
+ { SVM_EXIT_CLGI, "clgi" },
+ { SVM_EXIT_SKINIT, "skinit" },
+ { SVM_EXIT_WBINVD, "wbinvd" },
+ { SVM_EXIT_MONITOR, "monitor" },
+ { SVM_EXIT_MWAIT, "mwait" },
+ { SVM_EXIT_NPF, "npf" },
+ { -1, NULL }
+};
+
+static bool svm_gb_page_enable(void)
+{
+ return true;
+}
+
static struct kvm_x86_ops svm_x86_ops = {
.cpu_has_kvm_support = has_svm,
.disabled_by_bios = is_disabled,
@@ -2710,6 +2863,7 @@
.set_gdt = svm_set_gdt,
.get_dr = svm_get_dr,
.set_dr = svm_set_dr,
+ .cache_reg = svm_cache_reg,
.get_rflags = svm_get_rflags,
.set_rflags = svm_set_rflags,
@@ -2733,6 +2887,9 @@
.set_tss_addr = svm_set_tss_addr,
.get_tdp_level = get_npt_level,
.get_mt_mask = svm_get_mt_mask,
+
+ .exit_reasons_str = svm_exit_reasons_str,
+ .gb_page_enable = svm_gb_page_enable,
};
static int __init svm_init(void)
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 86dbac0..eea4043 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -9,12 +9,16 @@
int restart_timer = 0;
wait_queue_head_t *q = &vcpu->wq;
- /* FIXME: this code should not know anything about vcpus */
- if (!atomic_inc_and_test(&ktimer->pending))
+ /*
+ * There is a race window between reading and incrementing, but we do
+ * not care about potentially loosing timer events in the !reinject
+ * case anyway.
+ */
+ if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
+ atomic_inc(&ktimer->pending);
+ /* FIXME: this code should not know anything about vcpus */
set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
-
- if (!ktimer->reinject)
- atomic_set(&ktimer->pending, 1);
+ }
if (waitqueue_active(q))
wake_up_interruptible(q);
@@ -33,7 +37,7 @@
struct kvm_vcpu *vcpu;
struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
- vcpu = ktimer->kvm->vcpus[ktimer->vcpu_id];
+ vcpu = ktimer->vcpu;
if (!vcpu)
return HRTIMER_NORESTART;
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
new file mode 100644
index 0000000..0d480e7
--- /dev/null
+++ b/arch/x86/kvm/trace.h
@@ -0,0 +1,355 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH arch/x86/kvm
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Tracepoint for guest mode entry.
+ */
+TRACE_EVENT(kvm_entry,
+ TP_PROTO(unsigned int vcpu_id),
+ TP_ARGS(vcpu_id),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, vcpu_id )
+ ),
+
+ TP_fast_assign(
+ __entry->vcpu_id = vcpu_id;
+ ),
+
+ TP_printk("vcpu %u", __entry->vcpu_id)
+);
+
+/*
+ * Tracepoint for hypercall.
+ */
+TRACE_EVENT(kvm_hypercall,
+ TP_PROTO(unsigned long nr, unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3),
+ TP_ARGS(nr, a0, a1, a2, a3),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, nr )
+ __field( unsigned long, a0 )
+ __field( unsigned long, a1 )
+ __field( unsigned long, a2 )
+ __field( unsigned long, a3 )
+ ),
+
+ TP_fast_assign(
+ __entry->nr = nr;
+ __entry->a0 = a0;
+ __entry->a1 = a1;
+ __entry->a2 = a2;
+ __entry->a3 = a3;
+ ),
+
+ TP_printk("nr 0x%lx a0 0x%lx a1 0x%lx a2 0x%lx a3 0x%lx",
+ __entry->nr, __entry->a0, __entry->a1, __entry->a2,
+ __entry->a3)
+);
+
+/*
+ * Tracepoint for PIO.
+ */
+TRACE_EVENT(kvm_pio,
+ TP_PROTO(unsigned int rw, unsigned int port, unsigned int size,
+ unsigned int count),
+ TP_ARGS(rw, port, size, count),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, rw )
+ __field( unsigned int, port )
+ __field( unsigned int, size )
+ __field( unsigned int, count )
+ ),
+
+ TP_fast_assign(
+ __entry->rw = rw;
+ __entry->port = port;
+ __entry->size = size;
+ __entry->count = count;
+ ),
+
+ TP_printk("pio_%s at 0x%x size %d count %d",
+ __entry->rw ? "write" : "read",
+ __entry->port, __entry->size, __entry->count)
+);
+
+/*
+ * Tracepoint for cpuid.
+ */
+TRACE_EVENT(kvm_cpuid,
+ TP_PROTO(unsigned int function, unsigned long rax, unsigned long rbx,
+ unsigned long rcx, unsigned long rdx),
+ TP_ARGS(function, rax, rbx, rcx, rdx),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, function )
+ __field( unsigned long, rax )
+ __field( unsigned long, rbx )
+ __field( unsigned long, rcx )
+ __field( unsigned long, rdx )
+ ),
+
+ TP_fast_assign(
+ __entry->function = function;
+ __entry->rax = rax;
+ __entry->rbx = rbx;
+ __entry->rcx = rcx;
+ __entry->rdx = rdx;
+ ),
+
+ TP_printk("func %x rax %lx rbx %lx rcx %lx rdx %lx",
+ __entry->function, __entry->rax,
+ __entry->rbx, __entry->rcx, __entry->rdx)
+);
+
+#define AREG(x) { APIC_##x, "APIC_" #x }
+
+#define kvm_trace_symbol_apic \
+ AREG(ID), AREG(LVR), AREG(TASKPRI), AREG(ARBPRI), AREG(PROCPRI), \
+ AREG(EOI), AREG(RRR), AREG(LDR), AREG(DFR), AREG(SPIV), AREG(ISR), \
+ AREG(TMR), AREG(IRR), AREG(ESR), AREG(ICR), AREG(ICR2), AREG(LVTT), \
+ AREG(LVTTHMR), AREG(LVTPC), AREG(LVT0), AREG(LVT1), AREG(LVTERR), \
+ AREG(TMICT), AREG(TMCCT), AREG(TDCR), AREG(SELF_IPI), AREG(EFEAT), \
+ AREG(ECTRL)
+/*
+ * Tracepoint for apic access.
+ */
+TRACE_EVENT(kvm_apic,
+ TP_PROTO(unsigned int rw, unsigned int reg, unsigned int val),
+ TP_ARGS(rw, reg, val),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, rw )
+ __field( unsigned int, reg )
+ __field( unsigned int, val )
+ ),
+
+ TP_fast_assign(
+ __entry->rw = rw;
+ __entry->reg = reg;
+ __entry->val = val;
+ ),
+
+ TP_printk("apic_%s %s = 0x%x",
+ __entry->rw ? "write" : "read",
+ __print_symbolic(__entry->reg, kvm_trace_symbol_apic),
+ __entry->val)
+);
+
+#define trace_kvm_apic_read(reg, val) trace_kvm_apic(0, reg, val)
+#define trace_kvm_apic_write(reg, val) trace_kvm_apic(1, reg, val)
+
+/*
+ * Tracepoint for kvm guest exit:
+ */
+TRACE_EVENT(kvm_exit,
+ TP_PROTO(unsigned int exit_reason, unsigned long guest_rip),
+ TP_ARGS(exit_reason, guest_rip),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, exit_reason )
+ __field( unsigned long, guest_rip )
+ ),
+
+ TP_fast_assign(
+ __entry->exit_reason = exit_reason;
+ __entry->guest_rip = guest_rip;
+ ),
+
+ TP_printk("reason %s rip 0x%lx",
+ ftrace_print_symbols_seq(p, __entry->exit_reason,
+ kvm_x86_ops->exit_reasons_str),
+ __entry->guest_rip)
+);
+
+/*
+ * Tracepoint for kvm interrupt injection:
+ */
+TRACE_EVENT(kvm_inj_virq,
+ TP_PROTO(unsigned int irq),
+ TP_ARGS(irq),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, irq )
+ ),
+
+ TP_fast_assign(
+ __entry->irq = irq;
+ ),
+
+ TP_printk("irq %u", __entry->irq)
+);
+
+/*
+ * Tracepoint for page fault.
+ */
+TRACE_EVENT(kvm_page_fault,
+ TP_PROTO(unsigned long fault_address, unsigned int error_code),
+ TP_ARGS(fault_address, error_code),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, fault_address )
+ __field( unsigned int, error_code )
+ ),
+
+ TP_fast_assign(
+ __entry->fault_address = fault_address;
+ __entry->error_code = error_code;
+ ),
+
+ TP_printk("address %lx error_code %x",
+ __entry->fault_address, __entry->error_code)
+);
+
+/*
+ * Tracepoint for guest MSR access.
+ */
+TRACE_EVENT(kvm_msr,
+ TP_PROTO(unsigned int rw, unsigned int ecx, unsigned long data),
+ TP_ARGS(rw, ecx, data),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, rw )
+ __field( unsigned int, ecx )
+ __field( unsigned long, data )
+ ),
+
+ TP_fast_assign(
+ __entry->rw = rw;
+ __entry->ecx = ecx;
+ __entry->data = data;
+ ),
+
+ TP_printk("msr_%s %x = 0x%lx",
+ __entry->rw ? "write" : "read",
+ __entry->ecx, __entry->data)
+);
+
+#define trace_kvm_msr_read(ecx, data) trace_kvm_msr(0, ecx, data)
+#define trace_kvm_msr_write(ecx, data) trace_kvm_msr(1, ecx, data)
+
+/*
+ * Tracepoint for guest CR access.
+ */
+TRACE_EVENT(kvm_cr,
+ TP_PROTO(unsigned int rw, unsigned int cr, unsigned long val),
+ TP_ARGS(rw, cr, val),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, rw )
+ __field( unsigned int, cr )
+ __field( unsigned long, val )
+ ),
+
+ TP_fast_assign(
+ __entry->rw = rw;
+ __entry->cr = cr;
+ __entry->val = val;
+ ),
+
+ TP_printk("cr_%s %x = 0x%lx",
+ __entry->rw ? "write" : "read",
+ __entry->cr, __entry->val)
+);
+
+#define trace_kvm_cr_read(cr, val) trace_kvm_cr(0, cr, val)
+#define trace_kvm_cr_write(cr, val) trace_kvm_cr(1, cr, val)
+
+TRACE_EVENT(kvm_pic_set_irq,
+ TP_PROTO(__u8 chip, __u8 pin, __u8 elcr, __u8 imr, bool coalesced),
+ TP_ARGS(chip, pin, elcr, imr, coalesced),
+
+ TP_STRUCT__entry(
+ __field( __u8, chip )
+ __field( __u8, pin )
+ __field( __u8, elcr )
+ __field( __u8, imr )
+ __field( bool, coalesced )
+ ),
+
+ TP_fast_assign(
+ __entry->chip = chip;
+ __entry->pin = pin;
+ __entry->elcr = elcr;
+ __entry->imr = imr;
+ __entry->coalesced = coalesced;
+ ),
+
+ TP_printk("chip %u pin %u (%s%s)%s",
+ __entry->chip, __entry->pin,
+ (__entry->elcr & (1 << __entry->pin)) ? "level":"edge",
+ (__entry->imr & (1 << __entry->pin)) ? "|masked":"",
+ __entry->coalesced ? " (coalesced)" : "")
+);
+
+#define kvm_apic_dst_shorthand \
+ {0x0, "dst"}, \
+ {0x1, "self"}, \
+ {0x2, "all"}, \
+ {0x3, "all-but-self"}
+
+TRACE_EVENT(kvm_apic_ipi,
+ TP_PROTO(__u32 icr_low, __u32 dest_id),
+ TP_ARGS(icr_low, dest_id),
+
+ TP_STRUCT__entry(
+ __field( __u32, icr_low )
+ __field( __u32, dest_id )
+ ),
+
+ TP_fast_assign(
+ __entry->icr_low = icr_low;
+ __entry->dest_id = dest_id;
+ ),
+
+ TP_printk("dst %x vec %u (%s|%s|%s|%s|%s)",
+ __entry->dest_id, (u8)__entry->icr_low,
+ __print_symbolic((__entry->icr_low >> 8 & 0x7),
+ kvm_deliver_mode),
+ (__entry->icr_low & (1<<11)) ? "logical" : "physical",
+ (__entry->icr_low & (1<<14)) ? "assert" : "de-assert",
+ (__entry->icr_low & (1<<15)) ? "level" : "edge",
+ __print_symbolic((__entry->icr_low >> 18 & 0x3),
+ kvm_apic_dst_shorthand))
+);
+
+TRACE_EVENT(kvm_apic_accept_irq,
+ TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec, bool coalesced),
+ TP_ARGS(apicid, dm, tm, vec, coalesced),
+
+ TP_STRUCT__entry(
+ __field( __u32, apicid )
+ __field( __u16, dm )
+ __field( __u8, tm )
+ __field( __u8, vec )
+ __field( bool, coalesced )
+ ),
+
+ TP_fast_assign(
+ __entry->apicid = apicid;
+ __entry->dm = dm;
+ __entry->tm = tm;
+ __entry->vec = vec;
+ __entry->coalesced = coalesced;
+ ),
+
+ TP_printk("apicid %x vec %u (%s|%s)%s",
+ __entry->apicid, __entry->vec,
+ __print_symbolic((__entry->dm >> 8 & 0x7), kvm_deliver_mode),
+ __entry->tm ? "level" : "edge",
+ __entry->coalesced ? " (coalesced)" : "")
+);
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 29f9129..f381201 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -25,6 +25,7 @@
#include <linux/highmem.h>
#include <linux/sched.h>
#include <linux/moduleparam.h>
+#include <linux/ftrace_event.h>
#include "kvm_cache_regs.h"
#include "x86.h"
@@ -34,6 +35,8 @@
#include <asm/virtext.h>
#include <asm/mce.h>
+#include "trace.h"
+
#define __ex(x) __kvm_handle_fault_on_reboot(x)
MODULE_AUTHOR("Qumranet");
@@ -51,6 +54,10 @@
static int __read_mostly enable_ept = 1;
module_param_named(ept, enable_ept, bool, S_IRUGO);
+static int __read_mostly enable_unrestricted_guest = 1;
+module_param_named(unrestricted_guest,
+ enable_unrestricted_guest, bool, S_IRUGO);
+
static int __read_mostly emulate_invalid_guest_state = 0;
module_param(emulate_invalid_guest_state, bool, S_IRUGO);
@@ -84,6 +91,14 @@
int guest_efer_loaded;
} host_state;
struct {
+ int vm86_active;
+ u8 save_iopl;
+ struct kvm_save_segment {
+ u16 selector;
+ unsigned long base;
+ u32 limit;
+ u32 ar;
+ } tr, es, ds, fs, gs;
struct {
bool pending;
u8 vector;
@@ -161,6 +176,8 @@
VMX_SEGMENT_FIELD(LDTR),
};
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
+
/*
* Keep MSR_K6_STAR at the end, as setup_msrs() will try to optimize it
* away by decrementing the array size.
@@ -256,6 +273,26 @@
cpu_has_vmx_virtualize_apic_accesses();
}
+static inline bool cpu_has_vmx_ept_execute_only(void)
+{
+ return !!(vmx_capability.ept & VMX_EPT_EXECUTE_ONLY_BIT);
+}
+
+static inline bool cpu_has_vmx_eptp_uncacheable(void)
+{
+ return !!(vmx_capability.ept & VMX_EPTP_UC_BIT);
+}
+
+static inline bool cpu_has_vmx_eptp_writeback(void)
+{
+ return !!(vmx_capability.ept & VMX_EPTP_WB_BIT);
+}
+
+static inline bool cpu_has_vmx_ept_2m_page(void)
+{
+ return !!(vmx_capability.ept & VMX_EPT_2MB_PAGE_BIT);
+}
+
static inline int cpu_has_vmx_invept_individual_addr(void)
{
return !!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT);
@@ -277,6 +314,12 @@
SECONDARY_EXEC_ENABLE_EPT;
}
+static inline int cpu_has_vmx_unrestricted_guest(void)
+{
+ return vmcs_config.cpu_based_2nd_exec_ctrl &
+ SECONDARY_EXEC_UNRESTRICTED_GUEST;
+}
+
static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
{
return flexpriority_enabled &&
@@ -497,14 +540,16 @@
eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR);
if (!vcpu->fpu_active)
eb |= 1u << NM_VECTOR;
+ /*
+ * Unconditionally intercept #DB so we can maintain dr6 without
+ * reading it every exit.
+ */
+ eb |= 1u << DB_VECTOR;
if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
- if (vcpu->guest_debug &
- (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
- eb |= 1u << DB_VECTOR;
if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
eb |= 1u << BP_VECTOR;
}
- if (vcpu->arch.rmode.vm86_active)
+ if (to_vmx(vcpu)->rmode.vm86_active)
eb = ~0;
if (enable_ept)
eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
@@ -528,12 +573,15 @@
static void load_transition_efer(struct vcpu_vmx *vmx)
{
int efer_offset = vmx->msr_offset_efer;
- u64 host_efer = vmx->host_msrs[efer_offset].data;
- u64 guest_efer = vmx->guest_msrs[efer_offset].data;
+ u64 host_efer;
+ u64 guest_efer;
u64 ignore_bits;
if (efer_offset < 0)
return;
+ host_efer = vmx->host_msrs[efer_offset].data;
+ guest_efer = vmx->guest_msrs[efer_offset].data;
+
/*
* NX is emulated; LMA and LME handled by hardware; SCE meaninless
* outside long mode
@@ -735,12 +783,17 @@
static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
{
- return vmcs_readl(GUEST_RFLAGS);
+ unsigned long rflags;
+
+ rflags = vmcs_readl(GUEST_RFLAGS);
+ if (to_vmx(vcpu)->rmode.vm86_active)
+ rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+ return rflags;
}
static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
{
- if (vcpu->arch.rmode.vm86_active)
+ if (to_vmx(vcpu)->rmode.vm86_active)
rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
vmcs_writel(GUEST_RFLAGS, rflags);
}
@@ -797,12 +850,13 @@
intr_info |= INTR_INFO_DELIVER_CODE_MASK;
}
- if (vcpu->arch.rmode.vm86_active) {
+ if (vmx->rmode.vm86_active) {
vmx->rmode.irq.pending = true;
vmx->rmode.irq.vector = nr;
vmx->rmode.irq.rip = kvm_rip_read(vcpu);
- if (nr == BP_VECTOR || nr == OF_VECTOR)
- vmx->rmode.irq.rip++;
+ if (kvm_exception_is_soft(nr))
+ vmx->rmode.irq.rip +=
+ vmx->vcpu.arch.event_exit_inst_len;
intr_info |= INTR_TYPE_SOFT_INTR;
vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
@@ -940,7 +994,7 @@
case MSR_EFER:
return kvm_get_msr_common(vcpu, msr_index, pdata);
#endif
- case MSR_IA32_TIME_STAMP_COUNTER:
+ case MSR_IA32_TSC:
data = guest_read_tsc();
break;
case MSR_IA32_SYSENTER_CS:
@@ -953,9 +1007,9 @@
data = vmcs_readl(GUEST_SYSENTER_ESP);
break;
default:
- vmx_load_host_state(to_vmx(vcpu));
msr = find_msr_entry(to_vmx(vcpu), msr_index);
if (msr) {
+ vmx_load_host_state(to_vmx(vcpu));
data = msr->data;
break;
}
@@ -1000,22 +1054,10 @@
case MSR_IA32_SYSENTER_ESP:
vmcs_writel(GUEST_SYSENTER_ESP, data);
break;
- case MSR_IA32_TIME_STAMP_COUNTER:
+ case MSR_IA32_TSC:
rdtscll(host_tsc);
guest_write_tsc(data, host_tsc);
break;
- case MSR_P6_PERFCTR0:
- case MSR_P6_PERFCTR1:
- case MSR_P6_EVNTSEL0:
- case MSR_P6_EVNTSEL1:
- /*
- * Just discard all writes to the performance counters; this
- * should keep both older linux and windows 64-bit guests
- * happy
- */
- pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
-
- break;
case MSR_IA32_CR_PAT:
if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
vmcs_write64(GUEST_IA32_PAT, data);
@@ -1024,9 +1066,9 @@
}
/* Otherwise falls through to kvm_set_msr_common */
default:
- vmx_load_host_state(vmx);
msr = find_msr_entry(vmx, msr_index);
if (msr) {
+ vmx_load_host_state(vmx);
msr->data = data;
break;
}
@@ -1046,6 +1088,10 @@
case VCPU_REGS_RIP:
vcpu->arch.regs[VCPU_REGS_RIP] = vmcs_readl(GUEST_RIP);
break;
+ case VCPU_EXREG_PDPTR:
+ if (enable_ept)
+ ept_save_pdptrs(vcpu);
+ break;
default:
break;
}
@@ -1203,7 +1249,8 @@
opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
SECONDARY_EXEC_WBINVD_EXITING |
SECONDARY_EXEC_ENABLE_VPID |
- SECONDARY_EXEC_ENABLE_EPT;
+ SECONDARY_EXEC_ENABLE_EPT |
+ SECONDARY_EXEC_UNRESTRICTED_GUEST;
if (adjust_vmx_controls(min2, opt2,
MSR_IA32_VMX_PROCBASED_CTLS2,
&_cpu_based_2nd_exec_control) < 0)
@@ -1217,12 +1264,9 @@
if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
/* CR3 accesses and invlpg don't need to cause VM Exits when EPT
enabled */
- min &= ~(CPU_BASED_CR3_LOAD_EXITING |
- CPU_BASED_CR3_STORE_EXITING |
- CPU_BASED_INVLPG_EXITING);
- if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
- &_cpu_based_exec_control) < 0)
- return -EIO;
+ _cpu_based_exec_control &= ~(CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING |
+ CPU_BASED_INVLPG_EXITING);
rdmsr(MSR_IA32_VMX_EPT_VPID_CAP,
vmx_capability.ept, vmx_capability.vpid);
}
@@ -1333,8 +1377,13 @@
if (!cpu_has_vmx_vpid())
enable_vpid = 0;
- if (!cpu_has_vmx_ept())
+ if (!cpu_has_vmx_ept()) {
enable_ept = 0;
+ enable_unrestricted_guest = 0;
+ }
+
+ if (!cpu_has_vmx_unrestricted_guest())
+ enable_unrestricted_guest = 0;
if (!cpu_has_vmx_flexpriority())
flexpriority_enabled = 0;
@@ -1342,6 +1391,9 @@
if (!cpu_has_vmx_tpr_shadow())
kvm_x86_ops->update_cr8_intercept = NULL;
+ if (enable_ept && !cpu_has_vmx_ept_2m_page())
+ kvm_disable_largepages();
+
return alloc_kvm_area();
}
@@ -1372,15 +1424,15 @@
struct vcpu_vmx *vmx = to_vmx(vcpu);
vmx->emulation_required = 1;
- vcpu->arch.rmode.vm86_active = 0;
+ vmx->rmode.vm86_active = 0;
- vmcs_writel(GUEST_TR_BASE, vcpu->arch.rmode.tr.base);
- vmcs_write32(GUEST_TR_LIMIT, vcpu->arch.rmode.tr.limit);
- vmcs_write32(GUEST_TR_AR_BYTES, vcpu->arch.rmode.tr.ar);
+ vmcs_writel(GUEST_TR_BASE, vmx->rmode.tr.base);
+ vmcs_write32(GUEST_TR_LIMIT, vmx->rmode.tr.limit);
+ vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
flags = vmcs_readl(GUEST_RFLAGS);
flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
- flags |= (vcpu->arch.rmode.save_iopl << IOPL_SHIFT);
+ flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
vmcs_writel(GUEST_RFLAGS, flags);
vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
@@ -1391,10 +1443,10 @@
if (emulate_invalid_guest_state)
return;
- fix_pmode_dataseg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
- fix_pmode_dataseg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
- fix_pmode_dataseg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
- fix_pmode_dataseg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
+ fix_pmode_dataseg(VCPU_SREG_ES, &vmx->rmode.es);
+ fix_pmode_dataseg(VCPU_SREG_DS, &vmx->rmode.ds);
+ fix_pmode_dataseg(VCPU_SREG_GS, &vmx->rmode.gs);
+ fix_pmode_dataseg(VCPU_SREG_FS, &vmx->rmode.fs);
vmcs_write16(GUEST_SS_SELECTOR, 0);
vmcs_write32(GUEST_SS_AR_BYTES, 0x93);
@@ -1433,20 +1485,23 @@
unsigned long flags;
struct vcpu_vmx *vmx = to_vmx(vcpu);
- vmx->emulation_required = 1;
- vcpu->arch.rmode.vm86_active = 1;
+ if (enable_unrestricted_guest)
+ return;
- vcpu->arch.rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
+ vmx->emulation_required = 1;
+ vmx->rmode.vm86_active = 1;
+
+ vmx->rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
vmcs_writel(GUEST_TR_BASE, rmode_tss_base(vcpu->kvm));
- vcpu->arch.rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
+ vmx->rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1);
- vcpu->arch.rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
+ vmx->rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
flags = vmcs_readl(GUEST_RFLAGS);
- vcpu->arch.rmode.save_iopl
+ vmx->rmode.save_iopl
= (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
@@ -1468,10 +1523,10 @@
vmcs_writel(GUEST_CS_BASE, 0xf0000);
vmcs_write16(GUEST_CS_SELECTOR, vmcs_readl(GUEST_CS_BASE) >> 4);
- fix_rmode_seg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
- fix_rmode_seg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
- fix_rmode_seg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
- fix_rmode_seg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
+ fix_rmode_seg(VCPU_SREG_ES, &vmx->rmode.es);
+ fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.ds);
+ fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.gs);
+ fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.fs);
continue_rmode:
kvm_mmu_reset_context(vcpu);
@@ -1545,11 +1600,11 @@
static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
{
+ if (!test_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_dirty))
+ return;
+
if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
- if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_ERR "EPT: Fail to load pdptrs!\n");
- return;
- }
vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
vmcs_write64(GUEST_PDPTR2, vcpu->arch.pdptrs[2]);
@@ -1557,6 +1612,21 @@
}
}
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
+{
+ if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
+ vcpu->arch.pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
+ vcpu->arch.pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
+ vcpu->arch.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
+ vcpu->arch.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
+ }
+
+ __set_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_avail);
+ __set_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_dirty);
+}
+
static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
@@ -1571,8 +1641,6 @@
CPU_BASED_CR3_STORE_EXITING));
vcpu->arch.cr0 = cr0;
vmx_set_cr4(vcpu, vcpu->arch.cr4);
- *hw_cr0 |= X86_CR0_PE | X86_CR0_PG;
- *hw_cr0 &= ~X86_CR0_WP;
} else if (!is_paging(vcpu)) {
/* From nonpaging to paging */
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
@@ -1581,9 +1649,10 @@
CPU_BASED_CR3_STORE_EXITING));
vcpu->arch.cr0 = cr0;
vmx_set_cr4(vcpu, vcpu->arch.cr4);
- if (!(vcpu->arch.cr0 & X86_CR0_WP))
- *hw_cr0 &= ~X86_CR0_WP;
}
+
+ if (!(cr0 & X86_CR0_WP))
+ *hw_cr0 &= ~X86_CR0_WP;
}
static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
@@ -1598,15 +1667,21 @@
static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
{
- unsigned long hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) |
- KVM_VM_CR0_ALWAYS_ON;
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+ unsigned long hw_cr0;
+
+ if (enable_unrestricted_guest)
+ hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST)
+ | KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
+ else
+ hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON;
vmx_fpu_deactivate(vcpu);
- if (vcpu->arch.rmode.vm86_active && (cr0 & X86_CR0_PE))
+ if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
enter_pmode(vcpu);
- if (!vcpu->arch.rmode.vm86_active && !(cr0 & X86_CR0_PE))
+ if (!vmx->rmode.vm86_active && !(cr0 & X86_CR0_PE))
enter_rmode(vcpu);
#ifdef CONFIG_X86_64
@@ -1650,10 +1725,8 @@
if (enable_ept) {
eptp = construct_eptp(cr3);
vmcs_write64(EPT_POINTER, eptp);
- ept_sync_context(eptp);
- ept_load_pdptrs(vcpu);
guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
- VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+ vcpu->kvm->arch.ept_identity_map_addr;
}
vmx_flush_tlb(vcpu);
@@ -1664,7 +1737,7 @@
static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
- unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.vm86_active ?
+ unsigned long hw_cr4 = cr4 | (to_vmx(vcpu)->rmode.vm86_active ?
KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
vcpu->arch.cr4 = cr4;
@@ -1707,16 +1780,13 @@
static int vmx_get_cpl(struct kvm_vcpu *vcpu)
{
- struct kvm_segment kvm_seg;
-
if (!(vcpu->arch.cr0 & X86_CR0_PE)) /* if real mode */
return 0;
if (vmx_get_rflags(vcpu) & X86_EFLAGS_VM) /* if virtual 8086 */
return 3;
- vmx_get_segment(vcpu, &kvm_seg, VCPU_SREG_CS);
- return kvm_seg.selector & 3;
+ return vmcs_read16(GUEST_CS_SELECTOR) & 3;
}
static u32 vmx_segment_access_rights(struct kvm_segment *var)
@@ -1744,20 +1814,21 @@
static void vmx_set_segment(struct kvm_vcpu *vcpu,
struct kvm_segment *var, int seg)
{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
u32 ar;
- if (vcpu->arch.rmode.vm86_active && seg == VCPU_SREG_TR) {
- vcpu->arch.rmode.tr.selector = var->selector;
- vcpu->arch.rmode.tr.base = var->base;
- vcpu->arch.rmode.tr.limit = var->limit;
- vcpu->arch.rmode.tr.ar = vmx_segment_access_rights(var);
+ if (vmx->rmode.vm86_active && seg == VCPU_SREG_TR) {
+ vmx->rmode.tr.selector = var->selector;
+ vmx->rmode.tr.base = var->base;
+ vmx->rmode.tr.limit = var->limit;
+ vmx->rmode.tr.ar = vmx_segment_access_rights(var);
return;
}
vmcs_writel(sf->base, var->base);
vmcs_write32(sf->limit, var->limit);
vmcs_write16(sf->selector, var->selector);
- if (vcpu->arch.rmode.vm86_active && var->s) {
+ if (vmx->rmode.vm86_active && var->s) {
/*
* Hack real-mode segments into vm86 compatibility.
*/
@@ -1766,6 +1837,21 @@
ar = 0xf3;
} else
ar = vmx_segment_access_rights(var);
+
+ /*
+ * Fix the "Accessed" bit in AR field of segment registers for older
+ * qemu binaries.
+ * IA32 arch specifies that at the time of processor reset the
+ * "Accessed" bit in the AR field of segment registers is 1. And qemu
+ * is setting it to 0 in the usedland code. This causes invalid guest
+ * state vmexit when "unrestricted guest" mode is turned on.
+ * Fix for this setup issue in cpu_reset is being pushed in the qemu
+ * tree. Newer qemu binaries with that qemu fix would not need this
+ * kvm hack.
+ */
+ if (enable_unrestricted_guest && (seg != VCPU_SREG_LDTR))
+ ar |= 0x1; /* Accessed */
+
vmcs_write32(sf->ar_bytes, ar);
}
@@ -2040,7 +2126,7 @@
if (likely(kvm->arch.ept_identity_pagetable_done))
return 1;
ret = 0;
- identity_map_pfn = VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT;
+ identity_map_pfn = kvm->arch.ept_identity_map_addr >> PAGE_SHIFT;
r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE);
if (r < 0)
goto out;
@@ -2062,11 +2148,19 @@
static void seg_setup(int seg)
{
struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+ unsigned int ar;
vmcs_write16(sf->selector, 0);
vmcs_writel(sf->base, 0);
vmcs_write32(sf->limit, 0xffff);
- vmcs_write32(sf->ar_bytes, 0xf3);
+ if (enable_unrestricted_guest) {
+ ar = 0x93;
+ if (seg == VCPU_SREG_CS)
+ ar |= 0x08; /* code segment */
+ } else
+ ar = 0xf3;
+
+ vmcs_write32(sf->ar_bytes, ar);
}
static int alloc_apic_access_page(struct kvm *kvm)
@@ -2101,14 +2195,15 @@
goto out;
kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
kvm_userspace_mem.flags = 0;
- kvm_userspace_mem.guest_phys_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+ kvm_userspace_mem.guest_phys_addr =
+ kvm->arch.ept_identity_map_addr;
kvm_userspace_mem.memory_size = PAGE_SIZE;
r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
if (r)
goto out;
kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
- VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT);
+ kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
out:
up_write(&kvm->slots_lock);
return r;
@@ -2209,6 +2304,8 @@
exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
if (!enable_ept)
exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
+ if (!enable_unrestricted_guest)
+ exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
}
@@ -2326,14 +2423,14 @@
goto out;
}
- vmx->vcpu.arch.rmode.vm86_active = 0;
+ vmx->rmode.vm86_active = 0;
vmx->soft_vnmi_blocked = 0;
vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
kvm_set_cr8(&vmx->vcpu, 0);
msr = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
- if (vmx->vcpu.vcpu_id == 0)
+ if (kvm_vcpu_is_bsp(&vmx->vcpu))
msr |= MSR_IA32_APICBASE_BSP;
kvm_set_apic_base(&vmx->vcpu, msr);
@@ -2344,7 +2441,7 @@
* GUEST_CS_BASE should really be 0xffff0000, but VT vm86 mode
* insists on having GUEST_CS_BASE == GUEST_CS_SELECTOR << 4. Sigh.
*/
- if (vmx->vcpu.vcpu_id == 0) {
+ if (kvm_vcpu_is_bsp(&vmx->vcpu)) {
vmcs_write16(GUEST_CS_SELECTOR, 0xf000);
vmcs_writel(GUEST_CS_BASE, 0x000f0000);
} else {
@@ -2373,7 +2470,7 @@
vmcs_writel(GUEST_SYSENTER_EIP, 0);
vmcs_writel(GUEST_RFLAGS, 0x02);
- if (vmx->vcpu.vcpu_id == 0)
+ if (kvm_vcpu_is_bsp(&vmx->vcpu))
kvm_rip_write(vcpu, 0xfff0);
else
kvm_rip_write(vcpu, 0);
@@ -2461,13 +2558,16 @@
uint32_t intr;
int irq = vcpu->arch.interrupt.nr;
- KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
+ trace_kvm_inj_virq(irq);
++vcpu->stat.irq_injections;
- if (vcpu->arch.rmode.vm86_active) {
+ if (vmx->rmode.vm86_active) {
vmx->rmode.irq.pending = true;
vmx->rmode.irq.vector = irq;
vmx->rmode.irq.rip = kvm_rip_read(vcpu);
+ if (vcpu->arch.interrupt.soft)
+ vmx->rmode.irq.rip +=
+ vmx->vcpu.arch.event_exit_inst_len;
vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
irq | INTR_TYPE_SOFT_INTR | INTR_INFO_VALID_MASK);
vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
@@ -2502,7 +2602,7 @@
}
++vcpu->stat.nmi_injections;
- if (vcpu->arch.rmode.vm86_active) {
+ if (vmx->rmode.vm86_active) {
vmx->rmode.irq.pending = true;
vmx->rmode.irq.vector = NMI_VECTOR;
vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2659,14 +2759,14 @@
if (enable_ept)
BUG();
cr2 = vmcs_readl(EXIT_QUALIFICATION);
- KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
- (u32)((u64)cr2 >> 32), handler);
+ trace_kvm_page_fault(cr2, error_code);
+
if (kvm_event_needs_reinjection(vcpu))
kvm_mmu_unprotect_page_virt(vcpu, cr2);
return kvm_mmu_page_fault(vcpu, cr2, error_code);
}
- if (vcpu->arch.rmode.vm86_active &&
+ if (vmx->rmode.vm86_active &&
handle_rmode_exception(vcpu, intr_info & INTR_INFO_VECTOR_MASK,
error_code)) {
if (vcpu->arch.halt_request) {
@@ -2707,7 +2807,6 @@
struct kvm_run *kvm_run)
{
++vcpu->stat.irq_exits;
- KVMTRACE_1D(INTR, vcpu, vmcs_read32(VM_EXIT_INTR_INFO), handler);
return 1;
}
@@ -2755,7 +2854,7 @@
static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
- unsigned long exit_qualification;
+ unsigned long exit_qualification, val;
int cr;
int reg;
@@ -2764,21 +2863,19 @@
reg = (exit_qualification >> 8) & 15;
switch ((exit_qualification >> 4) & 3) {
case 0: /* mov to cr */
- KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr,
- (u32)kvm_register_read(vcpu, reg),
- (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
- handler);
+ val = kvm_register_read(vcpu, reg);
+ trace_kvm_cr_write(cr, val);
switch (cr) {
case 0:
- kvm_set_cr0(vcpu, kvm_register_read(vcpu, reg));
+ kvm_set_cr0(vcpu, val);
skip_emulated_instruction(vcpu);
return 1;
case 3:
- kvm_set_cr3(vcpu, kvm_register_read(vcpu, reg));
+ kvm_set_cr3(vcpu, val);
skip_emulated_instruction(vcpu);
return 1;
case 4:
- kvm_set_cr4(vcpu, kvm_register_read(vcpu, reg));
+ kvm_set_cr4(vcpu, val);
skip_emulated_instruction(vcpu);
return 1;
case 8: {
@@ -2800,23 +2897,19 @@
vcpu->arch.cr0 &= ~X86_CR0_TS;
vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
vmx_fpu_activate(vcpu);
- KVMTRACE_0D(CLTS, vcpu, handler);
skip_emulated_instruction(vcpu);
return 1;
case 1: /*mov from cr*/
switch (cr) {
case 3:
kvm_register_write(vcpu, reg, vcpu->arch.cr3);
- KVMTRACE_3D(CR_READ, vcpu, (u32)cr,
- (u32)kvm_register_read(vcpu, reg),
- (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
- handler);
+ trace_kvm_cr_read(cr, vcpu->arch.cr3);
skip_emulated_instruction(vcpu);
return 1;
case 8:
- kvm_register_write(vcpu, reg, kvm_get_cr8(vcpu));
- KVMTRACE_2D(CR_READ, vcpu, (u32)cr,
- (u32)kvm_register_read(vcpu, reg), handler);
+ val = kvm_get_cr8(vcpu);
+ kvm_register_write(vcpu, reg, val);
+ trace_kvm_cr_read(cr, val);
skip_emulated_instruction(vcpu);
return 1;
}
@@ -2841,6 +2934,8 @@
unsigned long val;
int dr, reg;
+ if (!kvm_require_cpl(vcpu, 0))
+ return 1;
dr = vmcs_readl(GUEST_DR7);
if (dr & DR7_GD) {
/*
@@ -2884,7 +2979,6 @@
val = 0;
}
kvm_register_write(vcpu, reg, val);
- KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
} else {
val = vcpu->arch.regs[reg];
switch (dr) {
@@ -2917,7 +3011,6 @@
}
break;
}
- KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)val, handler);
}
skip_emulated_instruction(vcpu);
return 1;
@@ -2939,8 +3032,7 @@
return 1;
}
- KVMTRACE_3D(MSR_READ, vcpu, ecx, (u32)data, (u32)(data >> 32),
- handler);
+ trace_kvm_msr_read(ecx, data);
/* FIXME: handling of bits 32:63 of rax, rdx */
vcpu->arch.regs[VCPU_REGS_RAX] = data & -1u;
@@ -2955,8 +3047,7 @@
u64 data = (vcpu->arch.regs[VCPU_REGS_RAX] & -1u)
| ((u64)(vcpu->arch.regs[VCPU_REGS_RDX] & -1u) << 32);
- KVMTRACE_3D(MSR_WRITE, vcpu, ecx, (u32)data, (u32)(data >> 32),
- handler);
+ trace_kvm_msr_write(ecx, data);
if (vmx_set_msr(vcpu, ecx, data) != 0) {
kvm_inject_gp(vcpu, 0);
@@ -2983,7 +3074,6 @@
cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_INTR_PENDING;
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
- KVMTRACE_0D(PEND_INTR, vcpu, handler);
++vcpu->stat.irq_window_exits;
/*
@@ -3049,7 +3139,7 @@
printk(KERN_ERR
"Fail to handle apic access vmexit! Offset is 0x%lx\n",
offset);
- return -ENOTSUPP;
+ return -ENOEXEC;
}
return 1;
}
@@ -3118,7 +3208,7 @@
if (exit_qualification & (1 << 6)) {
printk(KERN_ERR "EPT: GPA exceeds GAW!\n");
- return -ENOTSUPP;
+ return -EINVAL;
}
gla_validity = (exit_qualification >> 7) & 0x3;
@@ -3130,14 +3220,98 @@
printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
(long unsigned int)exit_qualification);
kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
- kvm_run->hw.hardware_exit_reason = 0;
- return -ENOTSUPP;
+ kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
+ return 0;
}
gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+ trace_kvm_page_fault(gpa, exit_qualification);
return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
}
+static u64 ept_rsvd_mask(u64 spte, int level)
+{
+ int i;
+ u64 mask = 0;
+
+ for (i = 51; i > boot_cpu_data.x86_phys_bits; i--)
+ mask |= (1ULL << i);
+
+ if (level > 2)
+ /* bits 7:3 reserved */
+ mask |= 0xf8;
+ else if (level == 2) {
+ if (spte & (1ULL << 7))
+ /* 2MB ref, bits 20:12 reserved */
+ mask |= 0x1ff000;
+ else
+ /* bits 6:3 reserved */
+ mask |= 0x78;
+ }
+
+ return mask;
+}
+
+static void ept_misconfig_inspect_spte(struct kvm_vcpu *vcpu, u64 spte,
+ int level)
+{
+ printk(KERN_ERR "%s: spte 0x%llx level %d\n", __func__, spte, level);
+
+ /* 010b (write-only) */
+ WARN_ON((spte & 0x7) == 0x2);
+
+ /* 110b (write/execute) */
+ WARN_ON((spte & 0x7) == 0x6);
+
+ /* 100b (execute-only) and value not supported by logical processor */
+ if (!cpu_has_vmx_ept_execute_only())
+ WARN_ON((spte & 0x7) == 0x4);
+
+ /* not 000b */
+ if ((spte & 0x7)) {
+ u64 rsvd_bits = spte & ept_rsvd_mask(spte, level);
+
+ if (rsvd_bits != 0) {
+ printk(KERN_ERR "%s: rsvd_bits = 0x%llx\n",
+ __func__, rsvd_bits);
+ WARN_ON(1);
+ }
+
+ if (level == 1 || (level == 2 && (spte & (1ULL << 7)))) {
+ u64 ept_mem_type = (spte & 0x38) >> 3;
+
+ if (ept_mem_type == 2 || ept_mem_type == 3 ||
+ ept_mem_type == 7) {
+ printk(KERN_ERR "%s: ept_mem_type=0x%llx\n",
+ __func__, ept_mem_type);
+ WARN_ON(1);
+ }
+ }
+ }
+}
+
+static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 sptes[4];
+ int nr_sptes, i;
+ gpa_t gpa;
+
+ gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+
+ printk(KERN_ERR "EPT: Misconfiguration.\n");
+ printk(KERN_ERR "EPT: GPA: 0x%llx\n", gpa);
+
+ nr_sptes = kvm_mmu_get_spte_hierarchy(vcpu, gpa, sptes);
+
+ for (i = PT64_ROOT_LEVEL; i > PT64_ROOT_LEVEL - nr_sptes; --i)
+ ept_misconfig_inspect_spte(vcpu, sptes[i-1], i);
+
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+
+ return 0;
+}
+
static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
u32 cpu_based_vm_exec_control;
@@ -3217,8 +3391,9 @@
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
[EXIT_REASON_TASK_SWITCH] = handle_task_switch,
- [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation,
[EXIT_REASON_MCE_DURING_VMENTRY] = handle_machine_check,
+ [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation,
+ [EXIT_REASON_EPT_MISCONFIG] = handle_ept_misconfig,
};
static const int kvm_vmx_max_exit_handlers =
@@ -3234,8 +3409,7 @@
u32 exit_reason = vmx->exit_reason;
u32 vectoring_info = vmx->idt_vectoring_info;
- KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)kvm_rip_read(vcpu),
- (u32)((u64)kvm_rip_read(vcpu) >> 32), entryexit);
+ trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
/* If we need to emulate an MMIO from handle_invalid_guest_state
* we just return 0 */
@@ -3247,10 +3421,8 @@
/* Access CR3 don't cause VMExit in paging mode, so we need
* to sync with guest real CR3. */
- if (enable_ept && is_paging(vcpu)) {
+ if (enable_ept && is_paging(vcpu))
vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
- ept_load_pdptrs(vcpu);
- }
if (unlikely(vmx->fail)) {
kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
@@ -3326,10 +3498,8 @@
/* We need to handle NMIs before interrupts are enabled */
if ((exit_intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
- (exit_intr_info & INTR_INFO_VALID_MASK)) {
- KVMTRACE_0D(NMI, &vmx->vcpu, handler);
+ (exit_intr_info & INTR_INFO_VALID_MASK))
asm("int $2");
- }
idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
@@ -3434,6 +3604,10 @@
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
+ if (enable_ept && is_paging(vcpu)) {
+ vmcs_writel(GUEST_CR3, vcpu->arch.cr3);
+ ept_load_pdptrs(vcpu);
+ }
/* Record the guest's net vcpu time for enforced NMI injections. */
if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
vmx->entry_time = ktime_get();
@@ -3449,12 +3623,21 @@
if (test_bit(VCPU_REGS_RIP, (unsigned long *)&vcpu->arch.regs_dirty))
vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
+ /* When single-stepping over STI and MOV SS, we must clear the
+ * corresponding interruptibility bits in the guest state. Otherwise
+ * vmentry fails as it then expects bit 14 (BS) in pending debug
+ * exceptions being set, but that's not correct for the guest debugging
+ * case. */
+ if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+ vmx_set_interrupt_shadow(vcpu, 0);
+
/*
* Loading guest fpu may have cleared host cr0.ts
*/
vmcs_writel(HOST_CR0, read_cr0());
- set_debugreg(vcpu->arch.dr6, 6);
+ if (vcpu->arch.switch_db_regs)
+ set_debugreg(vcpu->arch.dr6, 6);
asm(
/* Store host registers */
@@ -3465,11 +3648,16 @@
"mov %%"R"sp, %c[host_rsp](%0) \n\t"
__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
"1: \n\t"
+ /* Reload cr2 if changed */
+ "mov %c[cr2](%0), %%"R"ax \n\t"
+ "mov %%cr2, %%"R"dx \n\t"
+ "cmp %%"R"ax, %%"R"dx \n\t"
+ "je 2f \n\t"
+ "mov %%"R"ax, %%cr2 \n\t"
+ "2: \n\t"
/* Check if vmlaunch of vmresume is needed */
"cmpl $0, %c[launched](%0) \n\t"
/* Load guest registers. Don't clobber flags. */
- "mov %c[cr2](%0), %%"R"ax \n\t"
- "mov %%"R"ax, %%cr2 \n\t"
"mov %c[rax](%0), %%"R"ax \n\t"
"mov %c[rbx](%0), %%"R"bx \n\t"
"mov %c[rdx](%0), %%"R"dx \n\t"
@@ -3547,10 +3735,12 @@
#endif
);
- vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
+ vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
+ | (1 << VCPU_EXREG_PDPTR));
vcpu->arch.regs_dirty = 0;
- get_debugreg(vcpu->arch.dr6, 6);
+ if (vcpu->arch.switch_db_regs)
+ get_debugreg(vcpu->arch.dr6, 6);
vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
if (vmx->rmode.irq.pending)
@@ -3633,9 +3823,13 @@
if (alloc_apic_access_page(kvm) != 0)
goto free_vmcs;
- if (enable_ept)
+ if (enable_ept) {
+ if (!kvm->arch.ept_identity_map_addr)
+ kvm->arch.ept_identity_map_addr =
+ VMX_EPT_IDENTITY_PAGETABLE_ADDR;
if (alloc_identity_pagetable(kvm) != 0)
goto free_vmcs;
+ }
return &vmx->vcpu;
@@ -3699,6 +3893,34 @@
return ret;
}
+static const struct trace_print_flags vmx_exit_reasons_str[] = {
+ { EXIT_REASON_EXCEPTION_NMI, "exception" },
+ { EXIT_REASON_EXTERNAL_INTERRUPT, "ext_irq" },
+ { EXIT_REASON_TRIPLE_FAULT, "triple_fault" },
+ { EXIT_REASON_NMI_WINDOW, "nmi_window" },
+ { EXIT_REASON_IO_INSTRUCTION, "io_instruction" },
+ { EXIT_REASON_CR_ACCESS, "cr_access" },
+ { EXIT_REASON_DR_ACCESS, "dr_access" },
+ { EXIT_REASON_CPUID, "cpuid" },
+ { EXIT_REASON_MSR_READ, "rdmsr" },
+ { EXIT_REASON_MSR_WRITE, "wrmsr" },
+ { EXIT_REASON_PENDING_INTERRUPT, "interrupt_window" },
+ { EXIT_REASON_HLT, "halt" },
+ { EXIT_REASON_INVLPG, "invlpg" },
+ { EXIT_REASON_VMCALL, "hypercall" },
+ { EXIT_REASON_TPR_BELOW_THRESHOLD, "tpr_below_thres" },
+ { EXIT_REASON_APIC_ACCESS, "apic_access" },
+ { EXIT_REASON_WBINVD, "wbinvd" },
+ { EXIT_REASON_TASK_SWITCH, "task_switch" },
+ { EXIT_REASON_EPT_VIOLATION, "ept_violation" },
+ { -1, NULL }
+};
+
+static bool vmx_gb_page_enable(void)
+{
+ return false;
+}
+
static struct kvm_x86_ops vmx_x86_ops = {
.cpu_has_kvm_support = cpu_has_kvm_support,
.disabled_by_bios = vmx_disabled_by_bios,
@@ -3758,6 +3980,9 @@
.set_tss_addr = vmx_set_tss_addr,
.get_tdp_level = get_ept_level,
.get_mt_mask = vmx_get_mt_mask,
+
+ .exit_reasons_str = vmx_exit_reasons_str,
+ .gb_page_enable = vmx_gb_page_enable,
};
static int __init vmx_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3d45290..be451ee44 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,11 +37,16 @@
#include <linux/iommu.h>
#include <linux/intel-iommu.h>
#include <linux/cpufreq.h>
+#include <trace/events/kvm.h>
+#undef TRACE_INCLUDE_FILE
+#define CREATE_TRACE_POINTS
+#include "trace.h"
#include <asm/uaccess.h>
#include <asm/msr.h>
#include <asm/desc.h>
#include <asm/mtrr.h>
+#include <asm/mce.h>
#define MAX_IO_MSRS 256
#define CR0_RESERVED_BITS \
@@ -55,6 +60,10 @@
| X86_CR4_OSXMMEXCPT | X86_CR4_VMXE))
#define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR)
+
+#define KVM_MAX_MCE_BANKS 32
+#define KVM_MCE_CAP_SUPPORTED MCG_CTL_P
+
/* EFER defaults:
* - enable syscall per default because its emulated by KVM
* - enable LME and LMA per default on 64 bit KVM
@@ -68,14 +77,16 @@
#define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
+static void update_cr8_intercept(struct kvm_vcpu *vcpu);
static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries);
-struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
- u32 function, u32 index);
struct kvm_x86_ops *kvm_x86_ops;
EXPORT_SYMBOL_GPL(kvm_x86_ops);
+int ignore_msrs = 0;
+module_param_named(ignore_msrs, ignore_msrs, bool, S_IRUGO | S_IWUSR);
+
struct kvm_stats_debugfs_item debugfs_entries[] = {
{ "pf_fixed", VCPU_STAT(pf_fixed) },
{ "pf_guest", VCPU_STAT(pf_guest) },
@@ -122,18 +133,16 @@
if (selector == 0)
return 0;
- asm("sgdt %0" : "=m"(gdt));
+ kvm_get_gdt(&gdt);
table_base = gdt.base;
if (selector & 4) { /* from ldt */
- u16 ldt_selector;
+ u16 ldt_selector = kvm_read_ldt();
- asm("sldt %0" : "=g"(ldt_selector));
table_base = segment_base(ldt_selector);
}
d = (struct desc_struct *)(table_base + (selector & ~7));
- v = d->base0 | ((unsigned long)d->base1 << 16) |
- ((unsigned long)d->base2 << 24);
+ v = get_desc_base(d);
#ifdef CONFIG_X86_64
if (d->s == 0 && (d->type == 2 || d->type == 9 || d->type == 11))
v |= ((unsigned long)((struct ldttss_desc64 *)d)->base3) << 32;
@@ -176,16 +185,22 @@
++vcpu->stat.pf_guest;
if (vcpu->arch.exception.pending) {
- if (vcpu->arch.exception.nr == PF_VECTOR) {
- printk(KERN_DEBUG "kvm: inject_page_fault:"
- " double fault 0x%lx\n", addr);
- vcpu->arch.exception.nr = DF_VECTOR;
- vcpu->arch.exception.error_code = 0;
- } else if (vcpu->arch.exception.nr == DF_VECTOR) {
+ switch(vcpu->arch.exception.nr) {
+ case DF_VECTOR:
/* triple fault -> shutdown */
set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+ return;
+ case PF_VECTOR:
+ vcpu->arch.exception.nr = DF_VECTOR;
+ vcpu->arch.exception.error_code = 0;
+ return;
+ default:
+ /* replace previous exception with a new one in a hope
+ that instruction re-execution will regenerate lost
+ exception */
+ vcpu->arch.exception.pending = false;
+ break;
}
- return;
}
vcpu->arch.cr2 = addr;
kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
@@ -207,12 +222,18 @@
}
EXPORT_SYMBOL_GPL(kvm_queue_exception_e);
-static void __queue_exception(struct kvm_vcpu *vcpu)
+/*
+ * Checks if cpl <= required_cpl; if true, return true. Otherwise queue
+ * a #GP and return false.
+ */
+bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl)
{
- kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
- vcpu->arch.exception.has_error_code,
- vcpu->arch.exception.error_code);
+ if (kvm_x86_ops->get_cpl(vcpu) <= required_cpl)
+ return true;
+ kvm_queue_exception_e(vcpu, GP_VECTOR, 0);
+ return false;
}
+EXPORT_SYMBOL_GPL(kvm_require_cpl);
/*
* Load the pae pdptrs. Return true is they are all valid.
@@ -232,7 +253,7 @@
goto out;
}
for (i = 0; i < ARRAY_SIZE(pdpte); ++i) {
- if (is_present_pte(pdpte[i]) &&
+ if (is_present_gpte(pdpte[i]) &&
(pdpte[i] & vcpu->arch.mmu.rsvd_bits_mask[0][2])) {
ret = 0;
goto out;
@@ -241,6 +262,10 @@
ret = 1;
memcpy(vcpu->arch.pdptrs, pdpte, sizeof(vcpu->arch.pdptrs));
+ __set_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_avail);
+ __set_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_dirty);
out:
return ret;
@@ -256,6 +281,10 @@
if (is_long_mode(vcpu) || !is_pae(vcpu))
return false;
+ if (!test_bit(VCPU_EXREG_PDPTR,
+ (unsigned long *)&vcpu->arch.regs_avail))
+ return true;
+
r = kvm_read_guest(vcpu->kvm, vcpu->arch.cr3 & ~31u, pdpte, sizeof(pdpte));
if (r < 0)
goto out;
@@ -328,9 +357,6 @@
void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
{
kvm_set_cr0(vcpu, (vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f));
- KVMTRACE_1D(LMSW, vcpu,
- (u32)((vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f)),
- handler);
}
EXPORT_SYMBOL_GPL(kvm_lmsw);
@@ -466,7 +492,7 @@
#ifdef CONFIG_X86_64
MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
#endif
- MSR_IA32_TIME_STAMP_COUNTER, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
+ MSR_IA32_TSC, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
};
@@ -644,8 +670,7 @@
/* Keep irq disabled to prevent changes to the clock */
local_irq_save(flags);
- kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
- &vcpu->hv_clock.tsc_timestamp);
+ kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
ktime_get_ts(&ts);
local_irq_restore(flags);
@@ -778,23 +803,60 @@
return 0;
}
+static int set_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+ u64 mcg_cap = vcpu->arch.mcg_cap;
+ unsigned bank_num = mcg_cap & 0xff;
+
+ switch (msr) {
+ case MSR_IA32_MCG_STATUS:
+ vcpu->arch.mcg_status = data;
+ break;
+ case MSR_IA32_MCG_CTL:
+ if (!(mcg_cap & MCG_CTL_P))
+ return 1;
+ if (data != 0 && data != ~(u64)0)
+ return -1;
+ vcpu->arch.mcg_ctl = data;
+ break;
+ default:
+ if (msr >= MSR_IA32_MC0_CTL &&
+ msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
+ u32 offset = msr - MSR_IA32_MC0_CTL;
+ /* only 0 or all 1s can be written to IA32_MCi_CTL */
+ if ((offset & 0x3) == 0 &&
+ data != 0 && data != ~(u64)0)
+ return -1;
+ vcpu->arch.mce_banks[offset] = data;
+ break;
+ }
+ return 1;
+ }
+ return 0;
+}
+
int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
switch (msr) {
case MSR_EFER:
set_efer(vcpu, data);
break;
- case MSR_IA32_MC0_STATUS:
- pr_unimpl(vcpu, "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n",
- __func__, data);
+ case MSR_K7_HWCR:
+ data &= ~(u64)0x40; /* ignore flush filter disable */
+ if (data != 0) {
+ pr_unimpl(vcpu, "unimplemented HWCR wrmsr: 0x%llx\n",
+ data);
+ return 1;
+ }
break;
- case MSR_IA32_MCG_STATUS:
- pr_unimpl(vcpu, "%s: MSR_IA32_MCG_STATUS 0x%llx, nop\n",
- __func__, data);
+ case MSR_FAM10H_MMIO_CONF_BASE:
+ if (data != 0) {
+ pr_unimpl(vcpu, "unimplemented MMIO_CONF_BASE wrmsr: "
+ "0x%llx\n", data);
+ return 1;
+ }
break;
- case MSR_IA32_MCG_CTL:
- pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
- __func__, data);
+ case MSR_AMD64_NB_CFG:
break;
case MSR_IA32_DEBUGCTLMSR:
if (!data) {
@@ -811,12 +873,15 @@
case MSR_IA32_UCODE_REV:
case MSR_IA32_UCODE_WRITE:
case MSR_VM_HSAVE_PA:
+ case MSR_AMD64_PATCH_LOADER:
break;
case 0x200 ... 0x2ff:
return set_msr_mtrr(vcpu, msr, data);
case MSR_IA32_APICBASE:
kvm_set_apic_base(vcpu, data);
break;
+ case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+ return kvm_x2apic_msr_write(vcpu, msr, data);
case MSR_IA32_MISC_ENABLE:
vcpu->arch.ia32_misc_enable_msr = data;
break;
@@ -850,9 +915,50 @@
kvm_request_guest_time_update(vcpu);
break;
}
+ case MSR_IA32_MCG_CTL:
+ case MSR_IA32_MCG_STATUS:
+ case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
+ return set_msr_mce(vcpu, msr, data);
+
+ /* Performance counters are not protected by a CPUID bit,
+ * so we should check all of them in the generic path for the sake of
+ * cross vendor migration.
+ * Writing a zero into the event select MSRs disables them,
+ * which we perfectly emulate ;-). Any other value should be at least
+ * reported, some guests depend on them.
+ */
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ case MSR_K7_EVNTSEL0:
+ case MSR_K7_EVNTSEL1:
+ case MSR_K7_EVNTSEL2:
+ case MSR_K7_EVNTSEL3:
+ if (data != 0)
+ pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
+ "0x%x data 0x%llx\n", msr, data);
+ break;
+ /* at least RHEL 4 unconditionally writes to the perfctr registers,
+ * so we ignore writes to make it happy.
+ */
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ case MSR_K7_PERFCTR0:
+ case MSR_K7_PERFCTR1:
+ case MSR_K7_PERFCTR2:
+ case MSR_K7_PERFCTR3:
+ pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
+ "0x%x data 0x%llx\n", msr, data);
+ break;
default:
- pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
- return 1;
+ if (!ignore_msrs) {
+ pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n",
+ msr, data);
+ return 1;
+ } else {
+ pr_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n",
+ msr, data);
+ break;
+ }
}
return 0;
}
@@ -905,26 +1011,47 @@
return 0;
}
+static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+ u64 data;
+ u64 mcg_cap = vcpu->arch.mcg_cap;
+ unsigned bank_num = mcg_cap & 0xff;
+
+ switch (msr) {
+ case MSR_IA32_P5_MC_ADDR:
+ case MSR_IA32_P5_MC_TYPE:
+ data = 0;
+ break;
+ case MSR_IA32_MCG_CAP:
+ data = vcpu->arch.mcg_cap;
+ break;
+ case MSR_IA32_MCG_CTL:
+ if (!(mcg_cap & MCG_CTL_P))
+ return 1;
+ data = vcpu->arch.mcg_ctl;
+ break;
+ case MSR_IA32_MCG_STATUS:
+ data = vcpu->arch.mcg_status;
+ break;
+ default:
+ if (msr >= MSR_IA32_MC0_CTL &&
+ msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
+ u32 offset = msr - MSR_IA32_MC0_CTL;
+ data = vcpu->arch.mce_banks[offset];
+ break;
+ }
+ return 1;
+ }
+ *pdata = data;
+ return 0;
+}
+
int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
{
u64 data;
switch (msr) {
- case 0xc0010010: /* SYSCFG */
- case 0xc0010015: /* HWCR */
case MSR_IA32_PLATFORM_ID:
- case MSR_IA32_P5_MC_ADDR:
- case MSR_IA32_P5_MC_TYPE:
- case MSR_IA32_MC0_CTL:
- case MSR_IA32_MCG_STATUS:
- case MSR_IA32_MCG_CAP:
- case MSR_IA32_MCG_CTL:
- case MSR_IA32_MC0_MISC:
- case MSR_IA32_MC0_MISC+4:
- case MSR_IA32_MC0_MISC+8:
- case MSR_IA32_MC0_MISC+12:
- case MSR_IA32_MC0_MISC+16:
- case MSR_IA32_MC0_MISC+20:
case MSR_IA32_UCODE_REV:
case MSR_IA32_EBL_CR_POWERON:
case MSR_IA32_DEBUGCTLMSR:
@@ -932,10 +1059,18 @@
case MSR_IA32_LASTBRANCHTOIP:
case MSR_IA32_LASTINTFROMIP:
case MSR_IA32_LASTINTTOIP:
+ case MSR_K8_SYSCFG:
+ case MSR_K7_HWCR:
case MSR_VM_HSAVE_PA:
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
case MSR_P6_EVNTSEL0:
case MSR_P6_EVNTSEL1:
case MSR_K7_EVNTSEL0:
+ case MSR_K7_PERFCTR0:
+ case MSR_K8_INT_PENDING_MSG:
+ case MSR_AMD64_NB_CFG:
+ case MSR_FAM10H_MMIO_CONF_BASE:
data = 0;
break;
case MSR_MTRRcap:
@@ -949,6 +1084,9 @@
case MSR_IA32_APICBASE:
data = kvm_get_apic_base(vcpu);
break;
+ case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+ return kvm_x2apic_msr_read(vcpu, msr, pdata);
+ break;
case MSR_IA32_MISC_ENABLE:
data = vcpu->arch.ia32_misc_enable_msr;
break;
@@ -967,9 +1105,22 @@
case MSR_KVM_SYSTEM_TIME:
data = vcpu->arch.time;
break;
+ case MSR_IA32_P5_MC_ADDR:
+ case MSR_IA32_P5_MC_TYPE:
+ case MSR_IA32_MCG_CAP:
+ case MSR_IA32_MCG_CTL:
+ case MSR_IA32_MCG_STATUS:
+ case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
+ return get_msr_mce(vcpu, msr, pdata);
default:
- pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
- return 1;
+ if (!ignore_msrs) {
+ pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
+ return 1;
+ } else {
+ pr_unimpl(vcpu, "ignored rdmsr: 0x%x\n", msr);
+ data = 0;
+ }
+ break;
}
*pdata = data;
return 0;
@@ -1068,6 +1219,11 @@
case KVM_CAP_REINJECT_CONTROL:
case KVM_CAP_IRQ_INJECT_STATUS:
case KVM_CAP_ASSIGN_DEV_IRQ:
+ case KVM_CAP_IRQFD:
+ case KVM_CAP_IOEVENTFD:
+ case KVM_CAP_PIT2:
+ case KVM_CAP_PIT_STATE2:
+ case KVM_CAP_SET_IDENTITY_MAP_ADDR:
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
@@ -1088,6 +1244,9 @@
case KVM_CAP_IOMMU:
r = iommu_found();
break;
+ case KVM_CAP_MCE:
+ r = KVM_MAX_MCE_BANKS;
+ break;
default:
r = 0;
break;
@@ -1147,6 +1306,16 @@
r = 0;
break;
}
+ case KVM_X86_GET_MCE_CAP_SUPPORTED: {
+ u64 mce_cap;
+
+ mce_cap = KVM_MCE_CAP_SUPPORTED;
+ r = -EFAULT;
+ if (copy_to_user(argp, &mce_cap, sizeof mce_cap))
+ goto out;
+ r = 0;
+ break;
+ }
default:
r = -EINVAL;
}
@@ -1227,6 +1396,7 @@
vcpu->arch.cpuid_nent = cpuid->nent;
cpuid_fix_nx_cap(vcpu);
r = 0;
+ kvm_apic_set_version(vcpu);
out_free:
vfree(cpuid_entries);
@@ -1248,6 +1418,7 @@
cpuid->nent * sizeof(struct kvm_cpuid_entry2)))
goto out;
vcpu->arch.cpuid_nent = cpuid->nent;
+ kvm_apic_set_version(vcpu);
return 0;
out:
@@ -1290,6 +1461,7 @@
u32 index, int *nent, int maxnent)
{
unsigned f_nx = is_efer_nx() ? F(NX) : 0;
+ unsigned f_gbpages = kvm_x86_ops->gb_page_enable() ? F(GBPAGES) : 0;
#ifdef CONFIG_X86_64
unsigned f_lm = F(LM);
#else
@@ -1314,7 +1486,7 @@
F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
F(PAT) | F(PSE36) | 0 /* Reserved */ |
f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
- F(FXSR) | F(FXSR_OPT) | 0 /* GBPAGES */ | 0 /* RDTSCP */ |
+ F(FXSR) | F(FXSR_OPT) | f_gbpages | 0 /* RDTSCP */ |
0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
/* cpuid 1.ecx */
const u32 kvm_supported_word4_x86_features =
@@ -1323,7 +1495,7 @@
0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
0 /* Reserved */ | F(CX16) | 0 /* xTPR Update, PDCM */ |
0 /* Reserved, DCA */ | F(XMM4_1) |
- F(XMM4_2) | 0 /* x2APIC */ | F(MOVBE) | F(POPCNT) |
+ F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
0 /* Reserved, XSAVE, OSXSAVE */;
/* cpuid 0x80000001.ecx */
const u32 kvm_supported_word6_x86_features =
@@ -1344,6 +1516,9 @@
case 1:
entry->edx &= kvm_supported_word0_x86_features;
entry->ecx &= kvm_supported_word4_x86_features;
+ /* we support x2apic emulation even if host does not support
+ * it since we emulate x2apic in software */
+ entry->ecx |= F(X2APIC);
break;
/* function 2 entries are STATEFUL. That is, repeated cpuid commands
* may return different values. This forces us to get_cpu() before
@@ -1435,6 +1610,10 @@
for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func)
do_cpuid_ent(&cpuid_entries[nent], func, 0,
&nent, cpuid->nent);
+ r = -E2BIG;
+ if (nent >= cpuid->nent)
+ goto out_free;
+
r = -EFAULT;
if (copy_to_user(entries, cpuid_entries,
nent * sizeof(struct kvm_cpuid_entry2)))
@@ -1464,6 +1643,7 @@
vcpu_load(vcpu);
memcpy(vcpu->arch.apic->regs, s->regs, sizeof *s);
kvm_apic_post_state_restore(vcpu);
+ update_cr8_intercept(vcpu);
vcpu_put(vcpu);
return 0;
@@ -1503,6 +1683,80 @@
return 0;
}
+static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
+ u64 mcg_cap)
+{
+ int r;
+ unsigned bank_num = mcg_cap & 0xff, bank;
+
+ r = -EINVAL;
+ if (!bank_num)
+ goto out;
+ if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000))
+ goto out;
+ r = 0;
+ vcpu->arch.mcg_cap = mcg_cap;
+ /* Init IA32_MCG_CTL to all 1s */
+ if (mcg_cap & MCG_CTL_P)
+ vcpu->arch.mcg_ctl = ~(u64)0;
+ /* Init IA32_MCi_CTL to all 1s */
+ for (bank = 0; bank < bank_num; bank++)
+ vcpu->arch.mce_banks[bank*4] = ~(u64)0;
+out:
+ return r;
+}
+
+static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
+ struct kvm_x86_mce *mce)
+{
+ u64 mcg_cap = vcpu->arch.mcg_cap;
+ unsigned bank_num = mcg_cap & 0xff;
+ u64 *banks = vcpu->arch.mce_banks;
+
+ if (mce->bank >= bank_num || !(mce->status & MCI_STATUS_VAL))
+ return -EINVAL;
+ /*
+ * if IA32_MCG_CTL is not all 1s, the uncorrected error
+ * reporting is disabled
+ */
+ if ((mce->status & MCI_STATUS_UC) && (mcg_cap & MCG_CTL_P) &&
+ vcpu->arch.mcg_ctl != ~(u64)0)
+ return 0;
+ banks += 4 * mce->bank;
+ /*
+ * if IA32_MCi_CTL is not all 1s, the uncorrected error
+ * reporting is disabled for the bank
+ */
+ if ((mce->status & MCI_STATUS_UC) && banks[0] != ~(u64)0)
+ return 0;
+ if (mce->status & MCI_STATUS_UC) {
+ if ((vcpu->arch.mcg_status & MCG_STATUS_MCIP) ||
+ !(vcpu->arch.cr4 & X86_CR4_MCE)) {
+ printk(KERN_DEBUG "kvm: set_mce: "
+ "injects mce exception while "
+ "previous one is in progress!\n");
+ set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+ return 0;
+ }
+ if (banks[1] & MCI_STATUS_VAL)
+ mce->status |= MCI_STATUS_OVER;
+ banks[2] = mce->addr;
+ banks[3] = mce->misc;
+ vcpu->arch.mcg_status = mce->mcg_status;
+ banks[1] = mce->status;
+ kvm_queue_exception(vcpu, MC_VECTOR);
+ } else if (!(banks[1] & MCI_STATUS_VAL)
+ || !(banks[1] & MCI_STATUS_UC)) {
+ if (banks[1] & MCI_STATUS_VAL)
+ mce->status |= MCI_STATUS_OVER;
+ banks[2] = mce->addr;
+ banks[3] = mce->misc;
+ banks[1] = mce->status;
+ } else
+ banks[1] |= MCI_STATUS_OVER;
+ return 0;
+}
+
long kvm_arch_vcpu_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
@@ -1636,6 +1890,24 @@
kvm_lapic_set_vapic_addr(vcpu, va.vapic_addr);
break;
}
+ case KVM_X86_SETUP_MCE: {
+ u64 mcg_cap;
+
+ r = -EFAULT;
+ if (copy_from_user(&mcg_cap, argp, sizeof mcg_cap))
+ goto out;
+ r = kvm_vcpu_ioctl_x86_setup_mce(vcpu, mcg_cap);
+ break;
+ }
+ case KVM_X86_SET_MCE: {
+ struct kvm_x86_mce mce;
+
+ r = -EFAULT;
+ if (copy_from_user(&mce, argp, sizeof mce))
+ goto out;
+ r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
+ break;
+ }
default:
r = -EINVAL;
}
@@ -1654,6 +1926,13 @@
return ret;
}
+static int kvm_vm_ioctl_set_identity_map_addr(struct kvm *kvm,
+ u64 ident_addr)
+{
+ kvm->arch.ept_identity_map_addr = ident_addr;
+ return 0;
+}
+
static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
u32 kvm_nr_mmu_pages)
{
@@ -1775,19 +2054,25 @@
r = 0;
switch (chip->chip_id) {
case KVM_IRQCHIP_PIC_MASTER:
+ spin_lock(&pic_irqchip(kvm)->lock);
memcpy(&pic_irqchip(kvm)->pics[0],
&chip->chip.pic,
sizeof(struct kvm_pic_state));
+ spin_unlock(&pic_irqchip(kvm)->lock);
break;
case KVM_IRQCHIP_PIC_SLAVE:
+ spin_lock(&pic_irqchip(kvm)->lock);
memcpy(&pic_irqchip(kvm)->pics[1],
&chip->chip.pic,
sizeof(struct kvm_pic_state));
+ spin_unlock(&pic_irqchip(kvm)->lock);
break;
case KVM_IRQCHIP_IOAPIC:
+ mutex_lock(&kvm->irq_lock);
memcpy(ioapic_irqchip(kvm),
&chip->chip.ioapic,
sizeof(struct kvm_ioapic_state));
+ mutex_unlock(&kvm->irq_lock);
break;
default:
r = -EINVAL;
@@ -1801,7 +2086,9 @@
{
int r = 0;
+ mutex_lock(&kvm->arch.vpit->pit_state.lock);
memcpy(ps, &kvm->arch.vpit->pit_state, sizeof(struct kvm_pit_state));
+ mutex_unlock(&kvm->arch.vpit->pit_state.lock);
return r;
}
@@ -1809,8 +2096,39 @@
{
int r = 0;
+ mutex_lock(&kvm->arch.vpit->pit_state.lock);
memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
- kvm_pit_load_count(kvm, 0, ps->channels[0].count);
+ kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0);
+ mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+ return r;
+}
+
+static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
+{
+ int r = 0;
+
+ mutex_lock(&kvm->arch.vpit->pit_state.lock);
+ memcpy(ps->channels, &kvm->arch.vpit->pit_state.channels,
+ sizeof(ps->channels));
+ ps->flags = kvm->arch.vpit->pit_state.flags;
+ mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+ return r;
+}
+
+static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
+{
+ int r = 0, start = 0;
+ u32 prev_legacy, cur_legacy;
+ mutex_lock(&kvm->arch.vpit->pit_state.lock);
+ prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
+ cur_legacy = ps->flags & KVM_PIT_FLAGS_HPET_LEGACY;
+ if (!prev_legacy && cur_legacy)
+ start = 1;
+ memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels,
+ sizeof(kvm->arch.vpit->pit_state.channels));
+ kvm->arch.vpit->pit_state.flags = ps->flags;
+ kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start);
+ mutex_unlock(&kvm->arch.vpit->pit_state.lock);
return r;
}
@@ -1819,7 +2137,9 @@
{
if (!kvm->arch.vpit)
return -ENXIO;
+ mutex_lock(&kvm->arch.vpit->pit_state.lock);
kvm->arch.vpit->pit_state.pit_timer.reinject = control->pit_reinject;
+ mutex_unlock(&kvm->arch.vpit->pit_state.lock);
return 0;
}
@@ -1845,7 +2165,6 @@
spin_lock(&kvm->mmu_lock);
kvm_mmu_slot_remove_write_access(kvm, log->slot);
spin_unlock(&kvm->mmu_lock);
- kvm_flush_remote_tlbs(kvm);
memslot = &kvm->memslots[log->slot];
n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
memset(memslot->dirty_bitmap, 0, n);
@@ -1869,7 +2188,9 @@
*/
union {
struct kvm_pit_state ps;
+ struct kvm_pit_state2 ps2;
struct kvm_memory_alias alias;
+ struct kvm_pit_config pit_config;
} u;
switch (ioctl) {
@@ -1878,6 +2199,17 @@
if (r < 0)
goto out;
break;
+ case KVM_SET_IDENTITY_MAP_ADDR: {
+ u64 ident_addr;
+
+ r = -EFAULT;
+ if (copy_from_user(&ident_addr, argp, sizeof ident_addr))
+ goto out;
+ r = kvm_vm_ioctl_set_identity_map_addr(kvm, ident_addr);
+ if (r < 0)
+ goto out;
+ break;
+ }
case KVM_SET_MEMORY_REGION: {
struct kvm_memory_region kvm_mem;
struct kvm_userspace_memory_region kvm_userspace_mem;
@@ -1930,16 +2262,24 @@
}
break;
case KVM_CREATE_PIT:
- mutex_lock(&kvm->lock);
+ u.pit_config.flags = KVM_PIT_SPEAKER_DUMMY;
+ goto create_pit;
+ case KVM_CREATE_PIT2:
+ r = -EFAULT;
+ if (copy_from_user(&u.pit_config, argp,
+ sizeof(struct kvm_pit_config)))
+ goto out;
+ create_pit:
+ down_write(&kvm->slots_lock);
r = -EEXIST;
if (kvm->arch.vpit)
goto create_pit_unlock;
r = -ENOMEM;
- kvm->arch.vpit = kvm_create_pit(kvm);
+ kvm->arch.vpit = kvm_create_pit(kvm, u.pit_config.flags);
if (kvm->arch.vpit)
r = 0;
create_pit_unlock:
- mutex_unlock(&kvm->lock);
+ up_write(&kvm->slots_lock);
break;
case KVM_IRQ_LINE_STATUS:
case KVM_IRQ_LINE: {
@@ -1950,10 +2290,10 @@
goto out;
if (irqchip_in_kernel(kvm)) {
__s32 status;
- mutex_lock(&kvm->lock);
+ mutex_lock(&kvm->irq_lock);
status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
irq_event.irq, irq_event.level);
- mutex_unlock(&kvm->lock);
+ mutex_unlock(&kvm->irq_lock);
if (ioctl == KVM_IRQ_LINE_STATUS) {
irq_event.status = status;
if (copy_to_user(argp, &irq_event,
@@ -2042,6 +2382,32 @@
r = 0;
break;
}
+ case KVM_GET_PIT2: {
+ r = -ENXIO;
+ if (!kvm->arch.vpit)
+ goto out;
+ r = kvm_vm_ioctl_get_pit2(kvm, &u.ps2);
+ if (r)
+ goto out;
+ r = -EFAULT;
+ if (copy_to_user(argp, &u.ps2, sizeof(u.ps2)))
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_SET_PIT2: {
+ r = -EFAULT;
+ if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
+ goto out;
+ r = -ENXIO;
+ if (!kvm->arch.vpit)
+ goto out;
+ r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+ if (r)
+ goto out;
+ r = 0;
+ break;
+ }
case KVM_REINJECT_CONTROL: {
struct kvm_reinject_control control;
r = -EFAULT;
@@ -2075,35 +2441,23 @@
num_msrs_to_save = j;
}
-/*
- * Only apic need an MMIO device hook, so shortcut now..
- */
-static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
- gpa_t addr, int len,
- int is_write)
+static int vcpu_mmio_write(struct kvm_vcpu *vcpu, gpa_t addr, int len,
+ const void *v)
{
- struct kvm_io_device *dev;
+ if (vcpu->arch.apic &&
+ !kvm_iodevice_write(&vcpu->arch.apic->dev, addr, len, v))
+ return 0;
- if (vcpu->arch.apic) {
- dev = &vcpu->arch.apic->dev;
- if (dev->in_range(dev, addr, len, is_write))
- return dev;
- }
- return NULL;
+ return kvm_io_bus_write(&vcpu->kvm->mmio_bus, addr, len, v);
}
-
-static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
- gpa_t addr, int len,
- int is_write)
+static int vcpu_mmio_read(struct kvm_vcpu *vcpu, gpa_t addr, int len, void *v)
{
- struct kvm_io_device *dev;
+ if (vcpu->arch.apic &&
+ !kvm_iodevice_read(&vcpu->arch.apic->dev, addr, len, v))
+ return 0;
- dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
- if (dev == NULL)
- dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
- is_write);
- return dev;
+ return kvm_io_bus_read(&vcpu->kvm->mmio_bus, addr, len, v);
}
static int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
@@ -2172,11 +2526,12 @@
unsigned int bytes,
struct kvm_vcpu *vcpu)
{
- struct kvm_io_device *mmio_dev;
gpa_t gpa;
if (vcpu->mmio_read_completed) {
memcpy(val, vcpu->mmio_data, bytes);
+ trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes,
+ vcpu->mmio_phys_addr, *(u64 *)val);
vcpu->mmio_read_completed = 0;
return X86EMUL_CONTINUE;
}
@@ -2197,14 +2552,12 @@
/*
* Is this MMIO handled locally?
*/
- mutex_lock(&vcpu->kvm->lock);
- mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
- if (mmio_dev) {
- kvm_iodevice_read(mmio_dev, gpa, bytes, val);
- mutex_unlock(&vcpu->kvm->lock);
+ if (!vcpu_mmio_read(vcpu, gpa, bytes, val)) {
+ trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes, gpa, *(u64 *)val);
return X86EMUL_CONTINUE;
}
- mutex_unlock(&vcpu->kvm->lock);
+
+ trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, bytes, gpa, 0);
vcpu->mmio_needed = 1;
vcpu->mmio_phys_addr = gpa;
@@ -2231,7 +2584,6 @@
unsigned int bytes,
struct kvm_vcpu *vcpu)
{
- struct kvm_io_device *mmio_dev;
gpa_t gpa;
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
@@ -2249,17 +2601,12 @@
return X86EMUL_CONTINUE;
mmio:
+ trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, bytes, gpa, *(u64 *)val);
/*
* Is this MMIO handled locally?
*/
- mutex_lock(&vcpu->kvm->lock);
- mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
- if (mmio_dev) {
- kvm_iodevice_write(mmio_dev, gpa, bytes, val);
- mutex_unlock(&vcpu->kvm->lock);
+ if (!vcpu_mmio_write(vcpu, gpa, bytes, val))
return X86EMUL_CONTINUE;
- }
- mutex_unlock(&vcpu->kvm->lock);
vcpu->mmio_needed = 1;
vcpu->mmio_phys_addr = gpa;
@@ -2297,12 +2644,7 @@
unsigned int bytes,
struct kvm_vcpu *vcpu)
{
- static int reported;
-
- if (!reported) {
- reported = 1;
- printk(KERN_WARNING "kvm: emulating exchange as write\n");
- }
+ printk_once(KERN_WARNING "kvm: emulating exchange as write\n");
#ifndef CONFIG_X86_64
/* guests cmpxchg8b have to be emulated atomically */
if (bytes == 8) {
@@ -2348,7 +2690,6 @@
int emulate_clts(struct kvm_vcpu *vcpu)
{
- KVMTRACE_0D(CLTS, vcpu, handler);
kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
return X86EMUL_CONTINUE;
}
@@ -2425,7 +2766,7 @@
kvm_clear_exception_queue(vcpu);
vcpu->arch.mmio_fault_cr2 = cr2;
/*
- * TODO: fix x86_emulate.c to use guest_read/write_register
+ * TODO: fix emulate.c to use guest_read/write_register
* instead of direct ->regs accesses, can save hundred cycles
* on Intel for instructions that don't read/change RSP, for
* for example.
@@ -2449,14 +2790,33 @@
r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
- /* Reject the instructions other than VMCALL/VMMCALL when
- * try to emulate invalid opcode */
+ /* Only allow emulation of specific instructions on #UD
+ * (namely VMMCALL, sysenter, sysexit, syscall)*/
c = &vcpu->arch.emulate_ctxt.decode;
- if ((emulation_type & EMULTYPE_TRAP_UD) &&
- (!(c->twobyte && c->b == 0x01 &&
- (c->modrm_reg == 0 || c->modrm_reg == 3) &&
- c->modrm_mod == 3 && c->modrm_rm == 1)))
- return EMULATE_FAIL;
+ if (emulation_type & EMULTYPE_TRAP_UD) {
+ if (!c->twobyte)
+ return EMULATE_FAIL;
+ switch (c->b) {
+ case 0x01: /* VMMCALL */
+ if (c->modrm_mod != 3 || c->modrm_rm != 1)
+ return EMULATE_FAIL;
+ break;
+ case 0x34: /* sysenter */
+ case 0x35: /* sysexit */
+ if (c->modrm_mod != 0 || c->modrm_rm != 0)
+ return EMULATE_FAIL;
+ break;
+ case 0x05: /* syscall */
+ if (c->modrm_mod != 0 || c->modrm_rm != 0)
+ return EMULATE_FAIL;
+ break;
+ default:
+ return EMULATE_FAIL;
+ }
+
+ if (!(c->modrm_reg == 0 || c->modrm_reg == 3))
+ return EMULATE_FAIL;
+ }
++vcpu->stat.insn_emulation;
if (r) {
@@ -2576,52 +2936,40 @@
return 0;
}
-static void kernel_pio(struct kvm_io_device *pio_dev,
- struct kvm_vcpu *vcpu,
- void *pd)
+static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
{
/* TODO: String I/O for in kernel device */
+ int r;
- mutex_lock(&vcpu->kvm->lock);
if (vcpu->arch.pio.in)
- kvm_iodevice_read(pio_dev, vcpu->arch.pio.port,
- vcpu->arch.pio.size,
- pd);
+ r = kvm_io_bus_read(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
+ vcpu->arch.pio.size, pd);
else
- kvm_iodevice_write(pio_dev, vcpu->arch.pio.port,
- vcpu->arch.pio.size,
- pd);
- mutex_unlock(&vcpu->kvm->lock);
+ r = kvm_io_bus_write(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
+ vcpu->arch.pio.size, pd);
+ return r;
}
-static void pio_string_write(struct kvm_io_device *pio_dev,
- struct kvm_vcpu *vcpu)
+static int pio_string_write(struct kvm_vcpu *vcpu)
{
struct kvm_pio_request *io = &vcpu->arch.pio;
void *pd = vcpu->arch.pio_data;
- int i;
+ int i, r = 0;
- mutex_lock(&vcpu->kvm->lock);
for (i = 0; i < io->cur_count; i++) {
- kvm_iodevice_write(pio_dev, io->port,
- io->size,
- pd);
+ if (kvm_io_bus_write(&vcpu->kvm->pio_bus,
+ io->port, io->size, pd)) {
+ r = -EOPNOTSUPP;
+ break;
+ }
pd += io->size;
}
- mutex_unlock(&vcpu->kvm->lock);
-}
-
-static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
- gpa_t addr, int len,
- int is_write)
-{
- return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
+ return r;
}
int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
int size, unsigned port)
{
- struct kvm_io_device *pio_dev;
unsigned long val;
vcpu->run->exit_reason = KVM_EXIT_IO;
@@ -2635,19 +2983,13 @@
vcpu->arch.pio.down = 0;
vcpu->arch.pio.rep = 0;
- if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
- KVMTRACE_2D(IO_READ, vcpu, vcpu->run->io.port, (u32)size,
- handler);
- else
- KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
- handler);
+ trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
+ size, 1);
val = kvm_register_read(vcpu, VCPU_REGS_RAX);
memcpy(vcpu->arch.pio_data, &val, 4);
- pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
- if (pio_dev) {
- kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
+ if (!kernel_pio(vcpu, vcpu->arch.pio_data)) {
complete_pio(vcpu);
return 1;
}
@@ -2661,7 +3003,6 @@
{
unsigned now, in_page;
int ret = 0;
- struct kvm_io_device *pio_dev;
vcpu->run->exit_reason = KVM_EXIT_IO;
vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
@@ -2674,12 +3015,8 @@
vcpu->arch.pio.down = down;
vcpu->arch.pio.rep = rep;
- if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
- KVMTRACE_2D(IO_READ, vcpu, vcpu->run->io.port, (u32)size,
- handler);
- else
- KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
- handler);
+ trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
+ size, count);
if (!count) {
kvm_x86_ops->skip_emulated_instruction(vcpu);
@@ -2709,9 +3046,6 @@
vcpu->arch.pio.guest_gva = address;
- pio_dev = vcpu_find_pio_dev(vcpu, port,
- vcpu->arch.pio.cur_count,
- !vcpu->arch.pio.in);
if (!vcpu->arch.pio.in) {
/* string PIO write */
ret = pio_copy_data(vcpu);
@@ -2719,16 +3053,13 @@
kvm_inject_gp(vcpu, 0);
return 1;
}
- if (ret == 0 && pio_dev) {
- pio_string_write(pio_dev, vcpu);
+ if (ret == 0 && !pio_string_write(vcpu)) {
complete_pio(vcpu);
if (vcpu->arch.pio.count == 0)
ret = 1;
}
- } else if (pio_dev)
- pr_unimpl(vcpu, "no string pio read support yet, "
- "port %x size %d count %ld\n",
- port, size, count);
+ }
+ /* no string PIO read support yet */
return ret;
}
@@ -2761,10 +3092,7 @@
spin_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list) {
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- vcpu = kvm->vcpus[i];
- if (!vcpu)
- continue;
+ kvm_for_each_vcpu(i, vcpu, kvm) {
if (vcpu->cpu != freq->cpu)
continue;
if (!kvm_request_guest_time_update(vcpu))
@@ -2857,7 +3185,6 @@
int kvm_emulate_halt(struct kvm_vcpu *vcpu)
{
++vcpu->stat.halt_exits;
- KVMTRACE_0D(HLT, vcpu, handler);
if (irqchip_in_kernel(vcpu->kvm)) {
vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
return 1;
@@ -2888,7 +3215,7 @@
a2 = kvm_register_read(vcpu, VCPU_REGS_RDX);
a3 = kvm_register_read(vcpu, VCPU_REGS_RSI);
- KVMTRACE_1D(VMMCALL, vcpu, (u32)nr, handler);
+ trace_kvm_hypercall(nr, a0, a1, a2, a3);
if (!is_long_mode(vcpu)) {
nr &= 0xFFFFFFFF;
@@ -2898,6 +3225,11 @@
a3 &= 0xFFFFFFFF;
}
+ if (kvm_x86_ops->get_cpl(vcpu) != 0) {
+ ret = -KVM_EPERM;
+ goto out;
+ }
+
switch (nr) {
case KVM_HC_VAPIC_POLL_IRQ:
ret = 0;
@@ -2909,6 +3241,7 @@
ret = -KVM_ENOSYS;
break;
}
+out:
kvm_register_write(vcpu, VCPU_REGS_RAX, ret);
++vcpu->stat.hypercalls;
return r;
@@ -2988,8 +3321,6 @@
vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
return 0;
}
- KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
- (u32)((u64)value >> 32), handler);
return value;
}
@@ -2997,9 +3328,6 @@
void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
unsigned long *rflags)
{
- KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
- (u32)((u64)val >> 32), handler);
-
switch (cr) {
case 0:
kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -3109,11 +3437,11 @@
kvm_register_write(vcpu, VCPU_REGS_RDX, best->edx);
}
kvm_x86_ops->skip_emulated_instruction(vcpu);
- KVMTRACE_5D(CPUID, vcpu, function,
- (u32)kvm_register_read(vcpu, VCPU_REGS_RAX),
- (u32)kvm_register_read(vcpu, VCPU_REGS_RBX),
- (u32)kvm_register_read(vcpu, VCPU_REGS_RCX),
- (u32)kvm_register_read(vcpu, VCPU_REGS_RDX), handler);
+ trace_kvm_cpuid(function,
+ kvm_register_read(vcpu, VCPU_REGS_RAX),
+ kvm_register_read(vcpu, VCPU_REGS_RBX),
+ kvm_register_read(vcpu, VCPU_REGS_RCX),
+ kvm_register_read(vcpu, VCPU_REGS_RDX));
}
EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);
@@ -3179,6 +3507,9 @@
if (!kvm_x86_ops->update_cr8_intercept)
return;
+ if (!vcpu->arch.apic)
+ return;
+
if (!vcpu->arch.apic->vapic_addr)
max_irr = kvm_lapic_find_highest_irr(vcpu);
else
@@ -3192,12 +3523,16 @@
kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
}
-static void inject_pending_irq(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void inject_pending_event(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
- if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
- kvm_x86_ops->set_interrupt_shadow(vcpu, 0);
-
/* try to reinject previous events if any */
+ if (vcpu->arch.exception.pending) {
+ kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
+ vcpu->arch.exception.has_error_code,
+ vcpu->arch.exception.error_code);
+ return;
+ }
+
if (vcpu->arch.nmi_injected) {
kvm_x86_ops->set_nmi(vcpu);
return;
@@ -3271,16 +3606,14 @@
smp_mb__after_clear_bit();
if (vcpu->requests || need_resched() || signal_pending(current)) {
+ set_bit(KVM_REQ_KICK, &vcpu->requests);
local_irq_enable();
preempt_enable();
r = 1;
goto out;
}
- if (vcpu->arch.exception.pending)
- __queue_exception(vcpu);
- else
- inject_pending_irq(vcpu, kvm_run);
+ inject_pending_event(vcpu, kvm_run);
/* enable NMI/IRQ window open exits if needed */
if (vcpu->arch.nmi_pending)
@@ -3297,14 +3630,7 @@
kvm_guest_enter();
- get_debugreg(vcpu->arch.host_dr6, 6);
- get_debugreg(vcpu->arch.host_dr7, 7);
if (unlikely(vcpu->arch.switch_db_regs)) {
- get_debugreg(vcpu->arch.host_db[0], 0);
- get_debugreg(vcpu->arch.host_db[1], 1);
- get_debugreg(vcpu->arch.host_db[2], 2);
- get_debugreg(vcpu->arch.host_db[3], 3);
-
set_debugreg(0, 7);
set_debugreg(vcpu->arch.eff_db[0], 0);
set_debugreg(vcpu->arch.eff_db[1], 1);
@@ -3312,18 +3638,17 @@
set_debugreg(vcpu->arch.eff_db[3], 3);
}
- KVMTRACE_0D(VMENTRY, vcpu, entryexit);
+ trace_kvm_entry(vcpu->vcpu_id);
kvm_x86_ops->run(vcpu, kvm_run);
- if (unlikely(vcpu->arch.switch_db_regs)) {
- set_debugreg(0, 7);
- set_debugreg(vcpu->arch.host_db[0], 0);
- set_debugreg(vcpu->arch.host_db[1], 1);
- set_debugreg(vcpu->arch.host_db[2], 2);
- set_debugreg(vcpu->arch.host_db[3], 3);
+ if (unlikely(vcpu->arch.switch_db_regs || test_thread_flag(TIF_DEBUG))) {
+ set_debugreg(current->thread.debugreg0, 0);
+ set_debugreg(current->thread.debugreg1, 1);
+ set_debugreg(current->thread.debugreg2, 2);
+ set_debugreg(current->thread.debugreg3, 3);
+ set_debugreg(current->thread.debugreg6, 6);
+ set_debugreg(current->thread.debugreg7, 7);
}
- set_debugreg(vcpu->arch.host_dr6, 6);
- set_debugreg(vcpu->arch.host_dr7, 7);
set_bit(KVM_REQ_KICK, &vcpu->requests);
local_irq_enable();
@@ -3653,11 +3978,8 @@
static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
struct kvm_segment *kvm_desct)
{
- kvm_desct->base = seg_desc->base0;
- kvm_desct->base |= seg_desc->base1 << 16;
- kvm_desct->base |= seg_desc->base2 << 24;
- kvm_desct->limit = seg_desc->limit0;
- kvm_desct->limit |= seg_desc->limit << 16;
+ kvm_desct->base = get_desc_base(seg_desc);
+ kvm_desct->limit = get_desc_limit(seg_desc);
if (seg_desc->g) {
kvm_desct->limit <<= 12;
kvm_desct->limit |= 0xfff;
@@ -3701,7 +4023,6 @@
static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
struct desc_struct *seg_desc)
{
- gpa_t gpa;
struct descriptor_table dtable;
u16 index = selector >> 3;
@@ -3711,16 +4032,13 @@
kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
return 1;
}
- gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
- gpa += index * 8;
- return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
+ return kvm_read_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
}
/* allowed just for 8 bytes segments */
static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
struct desc_struct *seg_desc)
{
- gpa_t gpa;
struct descriptor_table dtable;
u16 index = selector >> 3;
@@ -3728,19 +4046,13 @@
if (dtable.limit < index * 8 + 7)
return 1;
- gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
- gpa += index * 8;
- return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
+ return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
}
static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
struct desc_struct *seg_desc)
{
- u32 base_addr;
-
- base_addr = seg_desc->base0;
- base_addr |= (seg_desc->base1 << 16);
- base_addr |= (seg_desc->base2 << 24);
+ u32 base_addr = get_desc_base(seg_desc);
return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
}
@@ -3785,12 +4097,19 @@
return 0;
}
+static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
+{
+ return (seg != VCPU_SREG_LDTR) &&
+ (seg != VCPU_SREG_TR) &&
+ (kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_VM);
+}
+
int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
int type_bits, int seg)
{
struct kvm_segment kvm_seg;
- if (!(vcpu->arch.cr0 & X86_CR0_PE))
+ if (is_vm86_segment(vcpu, seg) || !(vcpu->arch.cr0 & X86_CR0_PE))
return kvm_load_realmode_segment(vcpu, selector, seg);
if (load_segment_descriptor_to_kvm_desct(vcpu, selector, &kvm_seg))
return 1;
@@ -4029,7 +4348,7 @@
}
}
- if (!nseg_desc.p || (nseg_desc.limit0 | nseg_desc.limit << 16) < 0x67) {
+ if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
return 1;
}
@@ -4099,13 +4418,7 @@
vcpu->arch.cr2 = sregs->cr2;
mmu_reset_needed |= vcpu->arch.cr3 != sregs->cr3;
-
- down_read(&vcpu->kvm->slots_lock);
- if (gfn_to_memslot(vcpu->kvm, sregs->cr3 >> PAGE_SHIFT))
- vcpu->arch.cr3 = sregs->cr3;
- else
- set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
- up_read(&vcpu->kvm->slots_lock);
+ vcpu->arch.cr3 = sregs->cr3;
kvm_set_cr8(vcpu, sregs->cr8);
@@ -4147,8 +4460,10 @@
kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+ update_cr8_intercept(vcpu);
+
/* Older userspace won't unhalt the vcpu on reset. */
- if (vcpu->vcpu_id == 0 && kvm_rip_read(vcpu) == 0xfff0 &&
+ if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
!(vcpu->arch.cr0 & X86_CR0_PE))
vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
@@ -4419,7 +4734,7 @@
kvm = vcpu->kvm;
vcpu->arch.mmu.root_hpa = INVALID_PAGE;
- if (!irqchip_in_kernel(kvm) || vcpu->vcpu_id == 0)
+ if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_bsp(vcpu))
vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
else
vcpu->arch.mp_state = KVM_MP_STATE_UNINITIALIZED;
@@ -4441,6 +4756,14 @@
goto fail_mmu_destroy;
}
+ vcpu->arch.mce_banks = kzalloc(KVM_MAX_MCE_BANKS * sizeof(u64) * 4,
+ GFP_KERNEL);
+ if (!vcpu->arch.mce_banks) {
+ r = -ENOMEM;
+ goto fail_mmu_destroy;
+ }
+ vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
+
return 0;
fail_mmu_destroy:
@@ -4488,20 +4811,22 @@
static void kvm_free_vcpus(struct kvm *kvm)
{
unsigned int i;
+ struct kvm_vcpu *vcpu;
/*
* Unpin any mmu pages first.
*/
- for (i = 0; i < KVM_MAX_VCPUS; ++i)
- if (kvm->vcpus[i])
- kvm_unload_vcpu_mmu(kvm->vcpus[i]);
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- if (kvm->vcpus[i]) {
- kvm_arch_vcpu_free(kvm->vcpus[i]);
- kvm->vcpus[i] = NULL;
- }
- }
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ kvm_unload_vcpu_mmu(vcpu);
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ kvm_arch_vcpu_free(vcpu);
+ mutex_lock(&kvm->lock);
+ for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+ kvm->vcpus[i] = NULL;
+
+ atomic_set(&kvm->online_vcpus, 0);
+ mutex_unlock(&kvm->lock);
}
void kvm_arch_sync_events(struct kvm *kvm)
@@ -4578,7 +4903,6 @@
kvm_mmu_slot_remove_write_access(kvm, mem->slot);
spin_unlock(&kvm->mmu_lock);
- kvm_flush_remote_tlbs(kvm);
return 0;
}
@@ -4592,8 +4916,10 @@
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
{
return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
- || vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
- || vcpu->arch.nmi_pending;
+ || vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
+ || vcpu->arch.nmi_pending ||
+ (kvm_arch_interrupt_allowed(vcpu) &&
+ kvm_cpu_has_interrupt(vcpu));
}
void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
@@ -4617,3 +4943,9 @@
{
return kvm_x86_ops->interrupt_allowed(vcpu);
}
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_msr);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_cr);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 4c8e10a..5eadea5 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -31,4 +31,8 @@
{
return (nr == BP_VECTOR) || (nr == OF_VECTOR);
}
+
+struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
+ u32 function, u32 index);
+
#endif
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
deleted file mode 100644
index 616de46..0000000
--- a/arch/x86/kvm/x86_emulate.c
+++ /dev/null
@@ -1,2141 +0,0 @@
-/******************************************************************************
- * x86_emulate.c
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * Linux coding style, mod r/m decoder, segment base fixes, real-mode
- * privileged instructions:
- *
- * Copyright (C) 2006 Qumranet
- *
- * Avi Kivity <avi@qumranet.com>
- * Yaniv Kamay <yaniv@qumranet.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2. See
- * the COPYING file in the top-level directory.
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef __KERNEL__
-#include <stdio.h>
-#include <stdint.h>
-#include <public/xen.h>
-#define DPRINTF(_f, _a ...) printf(_f , ## _a)
-#else
-#include <linux/kvm_host.h>
-#include "kvm_cache_regs.h"
-#define DPRINTF(x...) do {} while (0)
-#endif
-#include <linux/module.h>
-#include <asm/kvm_x86_emulate.h>
-
-/*
- * Opcode effective-address decode tables.
- * Note that we only emulate instructions that have at least one memory
- * operand (excluding implicit stack references). We assume that stack
- * references and instruction fetches will never occur in special memory
- * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
- * not be handled.
- */
-
-/* Operand sizes: 8-bit operands or specified/overridden size. */
-#define ByteOp (1<<0) /* 8-bit operands. */
-/* Destination operand type. */
-#define ImplicitOps (1<<1) /* Implicit in opcode. No generic decode. */
-#define DstReg (2<<1) /* Register operand. */
-#define DstMem (3<<1) /* Memory operand. */
-#define DstAcc (4<<1) /* Destination Accumulator */
-#define DstMask (7<<1)
-/* Source operand type. */
-#define SrcNone (0<<4) /* No source operand. */
-#define SrcImplicit (0<<4) /* Source operand is implicit in the opcode. */
-#define SrcReg (1<<4) /* Register operand. */
-#define SrcMem (2<<4) /* Memory operand. */
-#define SrcMem16 (3<<4) /* Memory operand (16-bit). */
-#define SrcMem32 (4<<4) /* Memory operand (32-bit). */
-#define SrcImm (5<<4) /* Immediate operand. */
-#define SrcImmByte (6<<4) /* 8-bit sign-extended immediate operand. */
-#define SrcOne (7<<4) /* Implied '1' */
-#define SrcImmUByte (8<<4) /* 8-bit unsigned immediate operand. */
-#define SrcMask (0xf<<4)
-/* Generic ModRM decode. */
-#define ModRM (1<<8)
-/* Destination is only written; never read. */
-#define Mov (1<<9)
-#define BitOp (1<<10)
-#define MemAbs (1<<11) /* Memory operand is absolute displacement */
-#define String (1<<12) /* String instruction (rep capable) */
-#define Stack (1<<13) /* Stack instruction (push/pop) */
-#define Group (1<<14) /* Bits 3:5 of modrm byte extend opcode */
-#define GroupDual (1<<15) /* Alternate decoding of mod == 3 */
-#define GroupMask 0xff /* Group number stored in bits 0:7 */
-/* Source 2 operand type */
-#define Src2None (0<<29)
-#define Src2CL (1<<29)
-#define Src2ImmByte (2<<29)
-#define Src2One (3<<29)
-#define Src2Imm16 (4<<29)
-#define Src2Mask (7<<29)
-
-enum {
- Group1_80, Group1_81, Group1_82, Group1_83,
- Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
-};
-
-static u32 opcode_table[256] = {
- /* 0x00 - 0x07 */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
- /* 0x08 - 0x0F */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- 0, 0, 0, 0,
- /* 0x10 - 0x17 */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- 0, 0, 0, 0,
- /* 0x18 - 0x1F */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- 0, 0, 0, 0,
- /* 0x20 - 0x27 */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
- /* 0x28 - 0x2F */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- 0, 0, 0, 0,
- /* 0x30 - 0x37 */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- 0, 0, 0, 0,
- /* 0x38 - 0x3F */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
- ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
- 0, 0,
- /* 0x40 - 0x47 */
- DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
- /* 0x48 - 0x4F */
- DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
- /* 0x50 - 0x57 */
- SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
- SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
- /* 0x58 - 0x5F */
- DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
- DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
- /* 0x60 - 0x67 */
- 0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
- 0, 0, 0, 0,
- /* 0x68 - 0x6F */
- SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
- SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps, /* insb, insw/insd */
- SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps, /* outsb, outsw/outsd */
- /* 0x70 - 0x77 */
- SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
- SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
- /* 0x78 - 0x7F */
- SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
- SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
- /* 0x80 - 0x87 */
- Group | Group1_80, Group | Group1_81,
- Group | Group1_82, Group | Group1_83,
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
- /* 0x88 - 0x8F */
- ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
- ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
- DstReg | SrcMem | ModRM | Mov, Group | Group1A,
- /* 0x90 - 0x97 */
- DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
- /* 0x98 - 0x9F */
- 0, 0, SrcImm | Src2Imm16, 0,
- ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
- /* 0xA0 - 0xA7 */
- ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
- ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
- ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
- ByteOp | ImplicitOps | String, ImplicitOps | String,
- /* 0xA8 - 0xAF */
- 0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
- ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
- ByteOp | ImplicitOps | String, ImplicitOps | String,
- /* 0xB0 - 0xB7 */
- ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
- ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
- ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
- ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
- /* 0xB8 - 0xBF */
- DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
- DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
- DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
- DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
- /* 0xC0 - 0xC7 */
- ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
- 0, ImplicitOps | Stack, 0, 0,
- ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
- /* 0xC8 - 0xCF */
- 0, 0, 0, ImplicitOps | Stack,
- ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
- /* 0xD0 - 0xD7 */
- ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
- ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
- 0, 0, 0, 0,
- /* 0xD8 - 0xDF */
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0xE0 - 0xE7 */
- 0, 0, 0, 0,
- ByteOp | SrcImmUByte, SrcImmUByte,
- ByteOp | SrcImmUByte, SrcImmUByte,
- /* 0xE8 - 0xEF */
- SrcImm | Stack, SrcImm | ImplicitOps,
- SrcImm | Src2Imm16, SrcImmByte | ImplicitOps,
- SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
- SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
- /* 0xF0 - 0xF7 */
- 0, 0, 0, 0,
- ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
- /* 0xF8 - 0xFF */
- ImplicitOps, 0, ImplicitOps, ImplicitOps,
- ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
-};
-
-static u32 twobyte_table[256] = {
- /* 0x00 - 0x0F */
- 0, Group | GroupDual | Group7, 0, 0, 0, 0, ImplicitOps, 0,
- ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
- /* 0x10 - 0x1F */
- 0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
- /* 0x20 - 0x2F */
- ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0x30 - 0x3F */
- ImplicitOps, 0, ImplicitOps, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0x40 - 0x47 */
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- /* 0x48 - 0x4F */
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
- /* 0x50 - 0x5F */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0x60 - 0x6F */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0x70 - 0x7F */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0x80 - 0x8F */
- SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
- SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
- /* 0x90 - 0x9F */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0xA0 - 0xA7 */
- 0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
- DstMem | SrcReg | Src2ImmByte | ModRM,
- DstMem | SrcReg | Src2CL | ModRM, 0, 0,
- /* 0xA8 - 0xAF */
- 0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
- DstMem | SrcReg | Src2ImmByte | ModRM,
- DstMem | SrcReg | Src2CL | ModRM,
- ModRM, 0,
- /* 0xB0 - 0xB7 */
- ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
- DstMem | SrcReg | ModRM | BitOp,
- 0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem16 | ModRM | Mov,
- /* 0xB8 - 0xBF */
- 0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
- 0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
- DstReg | SrcMem16 | ModRM | Mov,
- /* 0xC0 - 0xCF */
- 0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
- 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0xD0 - 0xDF */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0xE0 - 0xEF */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- /* 0xF0 - 0xFF */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-static u32 group_table[] = {
- [Group1_80*8] =
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- [Group1_81*8] =
- DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
- DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
- DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
- DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
- [Group1_82*8] =
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
- [Group1_83*8] =
- DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
- DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
- DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
- DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
- [Group1A*8] =
- DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
- [Group3_Byte*8] =
- ByteOp | SrcImm | DstMem | ModRM, 0,
- ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
- 0, 0, 0, 0,
- [Group3*8] =
- DstMem | SrcImm | ModRM, 0,
- DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
- 0, 0, 0, 0,
- [Group4*8] =
- ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
- 0, 0, 0, 0, 0, 0,
- [Group5*8] =
- DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
- SrcMem | ModRM | Stack, 0,
- SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
- [Group7*8] =
- 0, 0, ModRM | SrcMem, ModRM | SrcMem,
- SrcNone | ModRM | DstMem | Mov, 0,
- SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
-};
-
-static u32 group2_table[] = {
- [Group7*8] =
- SrcNone | ModRM, 0, 0, SrcNone | ModRM,
- SrcNone | ModRM | DstMem | Mov, 0,
- SrcMem16 | ModRM | Mov, 0,
-};
-
-/* EFLAGS bit definitions. */
-#define EFLG_OF (1<<11)
-#define EFLG_DF (1<<10)
-#define EFLG_SF (1<<7)
-#define EFLG_ZF (1<<6)
-#define EFLG_AF (1<<4)
-#define EFLG_PF (1<<2)
-#define EFLG_CF (1<<0)
-
-/*
- * Instruction emulation:
- * Most instructions are emulated directly via a fragment of inline assembly
- * code. This allows us to save/restore EFLAGS and thus very easily pick up
- * any modified flags.
- */
-
-#if defined(CONFIG_X86_64)
-#define _LO32 "k" /* force 32-bit operand */
-#define _STK "%%rsp" /* stack pointer */
-#elif defined(__i386__)
-#define _LO32 "" /* force 32-bit operand */
-#define _STK "%%esp" /* stack pointer */
-#endif
-
-/*
- * These EFLAGS bits are restored from saved value during emulation, and
- * any changes are written back to the saved value after emulation.
- */
-#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
-
-/* Before executing instruction: restore necessary bits in EFLAGS. */
-#define _PRE_EFLAGS(_sav, _msk, _tmp) \
- /* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
- "movl %"_sav",%"_LO32 _tmp"; " \
- "push %"_tmp"; " \
- "push %"_tmp"; " \
- "movl %"_msk",%"_LO32 _tmp"; " \
- "andl %"_LO32 _tmp",("_STK"); " \
- "pushf; " \
- "notl %"_LO32 _tmp"; " \
- "andl %"_LO32 _tmp",("_STK"); " \
- "andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); " \
- "pop %"_tmp"; " \
- "orl %"_LO32 _tmp",("_STK"); " \
- "popf; " \
- "pop %"_sav"; "
-
-/* After executing instruction: write-back necessary bits in EFLAGS. */
-#define _POST_EFLAGS(_sav, _msk, _tmp) \
- /* _sav |= EFLAGS & _msk; */ \
- "pushf; " \
- "pop %"_tmp"; " \
- "andl %"_msk",%"_LO32 _tmp"; " \
- "orl %"_LO32 _tmp",%"_sav"; "
-
-#ifdef CONFIG_X86_64
-#define ON64(x) x
-#else
-#define ON64(x)
-#endif
-
-#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix) \
- do { \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "4", "2") \
- _op _suffix " %"_x"3,%1; " \
- _POST_EFLAGS("0", "4", "2") \
- : "=m" (_eflags), "=m" ((_dst).val), \
- "=&r" (_tmp) \
- : _y ((_src).val), "i" (EFLAGS_MASK)); \
- } while (0)
-
-
-/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
- do { \
- unsigned long _tmp; \
- \
- switch ((_dst).bytes) { \
- case 2: \
- ____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w"); \
- break; \
- case 4: \
- ____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l"); \
- break; \
- case 8: \
- ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q")); \
- break; \
- } \
- } while (0)
-
-#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
- do { \
- unsigned long _tmp; \
- switch ((_dst).bytes) { \
- case 1: \
- ____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b"); \
- break; \
- default: \
- __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
- _wx, _wy, _lx, _ly, _qx, _qy); \
- break; \
- } \
- } while (0)
-
-/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(_op, _src, _dst, _eflags) \
- __emulate_2op(_op, _src, _dst, _eflags, \
- "b", "c", "b", "c", "b", "c", "b", "c")
-
-/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(_op, _src, _dst, _eflags) \
- __emulate_2op(_op, _src, _dst, _eflags, \
- "b", "q", "w", "r", _LO32, "r", "", "r")
-
-/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags) \
- __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
- "w", "r", _LO32, "r", "", "r")
-
-/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) \
- do { \
- unsigned long _tmp; \
- _type _clv = (_cl).val; \
- _type _srcv = (_src).val; \
- _type _dstv = (_dst).val; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "5", "2") \
- _op _suffix " %4,%1 \n" \
- _POST_EFLAGS("0", "5", "2") \
- : "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp) \
- : "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK) \
- ); \
- \
- (_cl).val = (unsigned long) _clv; \
- (_src).val = (unsigned long) _srcv; \
- (_dst).val = (unsigned long) _dstv; \
- } while (0)
-
-#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags) \
- do { \
- switch ((_dst).bytes) { \
- case 2: \
- __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
- "w", unsigned short); \
- break; \
- case 4: \
- __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
- "l", unsigned int); \
- break; \
- case 8: \
- ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags, \
- "q", unsigned long)); \
- break; \
- } \
- } while (0)
-
-#define __emulate_1op(_op, _dst, _eflags, _suffix) \
- do { \
- unsigned long _tmp; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "3", "2") \
- _op _suffix " %1; " \
- _POST_EFLAGS("0", "3", "2") \
- : "=m" (_eflags), "+m" ((_dst).val), \
- "=&r" (_tmp) \
- : "i" (EFLAGS_MASK)); \
- } while (0)
-
-/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(_op, _dst, _eflags) \
- do { \
- switch ((_dst).bytes) { \
- case 1: __emulate_1op(_op, _dst, _eflags, "b"); break; \
- case 2: __emulate_1op(_op, _dst, _eflags, "w"); break; \
- case 4: __emulate_1op(_op, _dst, _eflags, "l"); break; \
- case 8: ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
- } \
- } while (0)
-
-/* Fetch next part of the instruction being emulated. */
-#define insn_fetch(_type, _size, _eip) \
-({ unsigned long _x; \
- rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size)); \
- if (rc != 0) \
- goto done; \
- (_eip) += (_size); \
- (_type)_x; \
-})
-
-static inline unsigned long ad_mask(struct decode_cache *c)
-{
- return (1UL << (c->ad_bytes << 3)) - 1;
-}
-
-/* Access/update address held in a register, based on addressing mode. */
-static inline unsigned long
-address_mask(struct decode_cache *c, unsigned long reg)
-{
- if (c->ad_bytes == sizeof(unsigned long))
- return reg;
- else
- return reg & ad_mask(c);
-}
-
-static inline unsigned long
-register_address(struct decode_cache *c, unsigned long base, unsigned long reg)
-{
- return base + address_mask(c, reg);
-}
-
-static inline void
-register_address_increment(struct decode_cache *c, unsigned long *reg, int inc)
-{
- if (c->ad_bytes == sizeof(unsigned long))
- *reg += inc;
- else
- *reg = (*reg & ~ad_mask(c)) | ((*reg + inc) & ad_mask(c));
-}
-
-static inline void jmp_rel(struct decode_cache *c, int rel)
-{
- register_address_increment(c, &c->eip, rel);
-}
-
-static void set_seg_override(struct decode_cache *c, int seg)
-{
- c->has_seg_override = true;
- c->seg_override = seg;
-}
-
-static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
-{
- if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
- return 0;
-
- return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
-}
-
-static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
- struct decode_cache *c)
-{
- if (!c->has_seg_override)
- return 0;
-
- return seg_base(ctxt, c->seg_override);
-}
-
-static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
-{
- return seg_base(ctxt, VCPU_SREG_ES);
-}
-
-static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
-{
- return seg_base(ctxt, VCPU_SREG_SS);
-}
-
-static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops,
- unsigned long linear, u8 *dest)
-{
- struct fetch_cache *fc = &ctxt->decode.fetch;
- int rc;
- int size;
-
- if (linear < fc->start || linear >= fc->end) {
- size = min(15UL, PAGE_SIZE - offset_in_page(linear));
- rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
- if (rc)
- return rc;
- fc->start = linear;
- fc->end = linear + size;
- }
- *dest = fc->data[linear - fc->start];
- return 0;
-}
-
-static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops,
- unsigned long eip, void *dest, unsigned size)
-{
- int rc = 0;
-
- eip += ctxt->cs_base;
- while (size--) {
- rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
- if (rc)
- return rc;
- }
- return 0;
-}
-
-/*
- * Given the 'reg' portion of a ModRM byte, and a register block, return a
- * pointer into the block that addresses the relevant register.
- * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
- */
-static void *decode_register(u8 modrm_reg, unsigned long *regs,
- int highbyte_regs)
-{
- void *p;
-
- p = ®s[modrm_reg];
- if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
- p = (unsigned char *)®s[modrm_reg & 3] + 1;
- return p;
-}
-
-static int read_descriptor(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops,
- void *ptr,
- u16 *size, unsigned long *address, int op_bytes)
-{
- int rc;
-
- if (op_bytes == 2)
- op_bytes = 3;
- *address = 0;
- rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
- ctxt->vcpu);
- if (rc)
- return rc;
- rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
- ctxt->vcpu);
- return rc;
-}
-
-static int test_cc(unsigned int condition, unsigned int flags)
-{
- int rc = 0;
-
- switch ((condition & 15) >> 1) {
- case 0: /* o */
- rc |= (flags & EFLG_OF);
- break;
- case 1: /* b/c/nae */
- rc |= (flags & EFLG_CF);
- break;
- case 2: /* z/e */
- rc |= (flags & EFLG_ZF);
- break;
- case 3: /* be/na */
- rc |= (flags & (EFLG_CF|EFLG_ZF));
- break;
- case 4: /* s */
- rc |= (flags & EFLG_SF);
- break;
- case 5: /* p/pe */
- rc |= (flags & EFLG_PF);
- break;
- case 7: /* le/ng */
- rc |= (flags & EFLG_ZF);
- /* fall through */
- case 6: /* l/nge */
- rc |= (!(flags & EFLG_SF) != !(flags & EFLG_OF));
- break;
- }
-
- /* Odd condition identifiers (lsb == 1) have inverted sense. */
- return (!!rc ^ (condition & 1));
-}
-
-static void decode_register_operand(struct operand *op,
- struct decode_cache *c,
- int inhibit_bytereg)
-{
- unsigned reg = c->modrm_reg;
- int highbyte_regs = c->rex_prefix == 0;
-
- if (!(c->d & ModRM))
- reg = (c->b & 7) | ((c->rex_prefix & 1) << 3);
- op->type = OP_REG;
- if ((c->d & ByteOp) && !inhibit_bytereg) {
- op->ptr = decode_register(reg, c->regs, highbyte_regs);
- op->val = *(u8 *)op->ptr;
- op->bytes = 1;
- } else {
- op->ptr = decode_register(reg, c->regs, 0);
- op->bytes = c->op_bytes;
- switch (op->bytes) {
- case 2:
- op->val = *(u16 *)op->ptr;
- break;
- case 4:
- op->val = *(u32 *)op->ptr;
- break;
- case 8:
- op->val = *(u64 *) op->ptr;
- break;
- }
- }
- op->orig_val = op->val;
-}
-
-static int decode_modrm(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
- u8 sib;
- int index_reg = 0, base_reg = 0, scale;
- int rc = 0;
-
- if (c->rex_prefix) {
- c->modrm_reg = (c->rex_prefix & 4) << 1; /* REX.R */
- index_reg = (c->rex_prefix & 2) << 2; /* REX.X */
- c->modrm_rm = base_reg = (c->rex_prefix & 1) << 3; /* REG.B */
- }
-
- c->modrm = insn_fetch(u8, 1, c->eip);
- c->modrm_mod |= (c->modrm & 0xc0) >> 6;
- c->modrm_reg |= (c->modrm & 0x38) >> 3;
- c->modrm_rm |= (c->modrm & 0x07);
- c->modrm_ea = 0;
- c->use_modrm_ea = 1;
-
- if (c->modrm_mod == 3) {
- c->modrm_ptr = decode_register(c->modrm_rm,
- c->regs, c->d & ByteOp);
- c->modrm_val = *(unsigned long *)c->modrm_ptr;
- return rc;
- }
-
- if (c->ad_bytes == 2) {
- unsigned bx = c->regs[VCPU_REGS_RBX];
- unsigned bp = c->regs[VCPU_REGS_RBP];
- unsigned si = c->regs[VCPU_REGS_RSI];
- unsigned di = c->regs[VCPU_REGS_RDI];
-
- /* 16-bit ModR/M decode. */
- switch (c->modrm_mod) {
- case 0:
- if (c->modrm_rm == 6)
- c->modrm_ea += insn_fetch(u16, 2, c->eip);
- break;
- case 1:
- c->modrm_ea += insn_fetch(s8, 1, c->eip);
- break;
- case 2:
- c->modrm_ea += insn_fetch(u16, 2, c->eip);
- break;
- }
- switch (c->modrm_rm) {
- case 0:
- c->modrm_ea += bx + si;
- break;
- case 1:
- c->modrm_ea += bx + di;
- break;
- case 2:
- c->modrm_ea += bp + si;
- break;
- case 3:
- c->modrm_ea += bp + di;
- break;
- case 4:
- c->modrm_ea += si;
- break;
- case 5:
- c->modrm_ea += di;
- break;
- case 6:
- if (c->modrm_mod != 0)
- c->modrm_ea += bp;
- break;
- case 7:
- c->modrm_ea += bx;
- break;
- }
- if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
- (c->modrm_rm == 6 && c->modrm_mod != 0))
- if (!c->has_seg_override)
- set_seg_override(c, VCPU_SREG_SS);
- c->modrm_ea = (u16)c->modrm_ea;
- } else {
- /* 32/64-bit ModR/M decode. */
- if ((c->modrm_rm & 7) == 4) {
- sib = insn_fetch(u8, 1, c->eip);
- index_reg |= (sib >> 3) & 7;
- base_reg |= sib & 7;
- scale = sib >> 6;
-
- if ((base_reg & 7) == 5 && c->modrm_mod == 0)
- c->modrm_ea += insn_fetch(s32, 4, c->eip);
- else
- c->modrm_ea += c->regs[base_reg];
- if (index_reg != 4)
- c->modrm_ea += c->regs[index_reg] << scale;
- } else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
- if (ctxt->mode == X86EMUL_MODE_PROT64)
- c->rip_relative = 1;
- } else
- c->modrm_ea += c->regs[c->modrm_rm];
- switch (c->modrm_mod) {
- case 0:
- if (c->modrm_rm == 5)
- c->modrm_ea += insn_fetch(s32, 4, c->eip);
- break;
- case 1:
- c->modrm_ea += insn_fetch(s8, 1, c->eip);
- break;
- case 2:
- c->modrm_ea += insn_fetch(s32, 4, c->eip);
- break;
- }
- }
-done:
- return rc;
-}
-
-static int decode_abs(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
- int rc = 0;
-
- switch (c->ad_bytes) {
- case 2:
- c->modrm_ea = insn_fetch(u16, 2, c->eip);
- break;
- case 4:
- c->modrm_ea = insn_fetch(u32, 4, c->eip);
- break;
- case 8:
- c->modrm_ea = insn_fetch(u64, 8, c->eip);
- break;
- }
-done:
- return rc;
-}
-
-int
-x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
- int rc = 0;
- int mode = ctxt->mode;
- int def_op_bytes, def_ad_bytes, group;
-
- /* Shadow copy of register state. Committed on successful emulation. */
-
- memset(c, 0, sizeof(struct decode_cache));
- c->eip = kvm_rip_read(ctxt->vcpu);
- ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
- memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-
- switch (mode) {
- case X86EMUL_MODE_REAL:
- case X86EMUL_MODE_PROT16:
- def_op_bytes = def_ad_bytes = 2;
- break;
- case X86EMUL_MODE_PROT32:
- def_op_bytes = def_ad_bytes = 4;
- break;
-#ifdef CONFIG_X86_64
- case X86EMUL_MODE_PROT64:
- def_op_bytes = 4;
- def_ad_bytes = 8;
- break;
-#endif
- default:
- return -1;
- }
-
- c->op_bytes = def_op_bytes;
- c->ad_bytes = def_ad_bytes;
-
- /* Legacy prefixes. */
- for (;;) {
- switch (c->b = insn_fetch(u8, 1, c->eip)) {
- case 0x66: /* operand-size override */
- /* switch between 2/4 bytes */
- c->op_bytes = def_op_bytes ^ 6;
- break;
- case 0x67: /* address-size override */
- if (mode == X86EMUL_MODE_PROT64)
- /* switch between 4/8 bytes */
- c->ad_bytes = def_ad_bytes ^ 12;
- else
- /* switch between 2/4 bytes */
- c->ad_bytes = def_ad_bytes ^ 6;
- break;
- case 0x26: /* ES override */
- case 0x2e: /* CS override */
- case 0x36: /* SS override */
- case 0x3e: /* DS override */
- set_seg_override(c, (c->b >> 3) & 3);
- break;
- case 0x64: /* FS override */
- case 0x65: /* GS override */
- set_seg_override(c, c->b & 7);
- break;
- case 0x40 ... 0x4f: /* REX */
- if (mode != X86EMUL_MODE_PROT64)
- goto done_prefixes;
- c->rex_prefix = c->b;
- continue;
- case 0xf0: /* LOCK */
- c->lock_prefix = 1;
- break;
- case 0xf2: /* REPNE/REPNZ */
- c->rep_prefix = REPNE_PREFIX;
- break;
- case 0xf3: /* REP/REPE/REPZ */
- c->rep_prefix = REPE_PREFIX;
- break;
- default:
- goto done_prefixes;
- }
-
- /* Any legacy prefix after a REX prefix nullifies its effect. */
-
- c->rex_prefix = 0;
- }
-
-done_prefixes:
-
- /* REX prefix. */
- if (c->rex_prefix)
- if (c->rex_prefix & 8)
- c->op_bytes = 8; /* REX.W */
-
- /* Opcode byte(s). */
- c->d = opcode_table[c->b];
- if (c->d == 0) {
- /* Two-byte opcode? */
- if (c->b == 0x0f) {
- c->twobyte = 1;
- c->b = insn_fetch(u8, 1, c->eip);
- c->d = twobyte_table[c->b];
- }
- }
-
- if (c->d & Group) {
- group = c->d & GroupMask;
- c->modrm = insn_fetch(u8, 1, c->eip);
- --c->eip;
-
- group = (group << 3) + ((c->modrm >> 3) & 7);
- if ((c->d & GroupDual) && (c->modrm >> 6) == 3)
- c->d = group2_table[group];
- else
- c->d = group_table[group];
- }
-
- /* Unrecognised? */
- if (c->d == 0) {
- DPRINTF("Cannot emulate %02x\n", c->b);
- return -1;
- }
-
- if (mode == X86EMUL_MODE_PROT64 && (c->d & Stack))
- c->op_bytes = 8;
-
- /* ModRM and SIB bytes. */
- if (c->d & ModRM)
- rc = decode_modrm(ctxt, ops);
- else if (c->d & MemAbs)
- rc = decode_abs(ctxt, ops);
- if (rc)
- goto done;
-
- if (!c->has_seg_override)
- set_seg_override(c, VCPU_SREG_DS);
-
- if (!(!c->twobyte && c->b == 0x8d))
- c->modrm_ea += seg_override_base(ctxt, c);
-
- if (c->ad_bytes != 8)
- c->modrm_ea = (u32)c->modrm_ea;
- /*
- * Decode and fetch the source operand: register, memory
- * or immediate.
- */
- switch (c->d & SrcMask) {
- case SrcNone:
- break;
- case SrcReg:
- decode_register_operand(&c->src, c, 0);
- break;
- case SrcMem16:
- c->src.bytes = 2;
- goto srcmem_common;
- case SrcMem32:
- c->src.bytes = 4;
- goto srcmem_common;
- case SrcMem:
- c->src.bytes = (c->d & ByteOp) ? 1 :
- c->op_bytes;
- /* Don't fetch the address for invlpg: it could be unmapped. */
- if (c->twobyte && c->b == 0x01 && c->modrm_reg == 7)
- break;
- srcmem_common:
- /*
- * For instructions with a ModR/M byte, switch to register
- * access if Mod = 3.
- */
- if ((c->d & ModRM) && c->modrm_mod == 3) {
- c->src.type = OP_REG;
- c->src.val = c->modrm_val;
- c->src.ptr = c->modrm_ptr;
- break;
- }
- c->src.type = OP_MEM;
- break;
- case SrcImm:
- c->src.type = OP_IMM;
- c->src.ptr = (unsigned long *)c->eip;
- c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- if (c->src.bytes == 8)
- c->src.bytes = 4;
- /* NB. Immediates are sign-extended as necessary. */
- switch (c->src.bytes) {
- case 1:
- c->src.val = insn_fetch(s8, 1, c->eip);
- break;
- case 2:
- c->src.val = insn_fetch(s16, 2, c->eip);
- break;
- case 4:
- c->src.val = insn_fetch(s32, 4, c->eip);
- break;
- }
- break;
- case SrcImmByte:
- case SrcImmUByte:
- c->src.type = OP_IMM;
- c->src.ptr = (unsigned long *)c->eip;
- c->src.bytes = 1;
- if ((c->d & SrcMask) == SrcImmByte)
- c->src.val = insn_fetch(s8, 1, c->eip);
- else
- c->src.val = insn_fetch(u8, 1, c->eip);
- break;
- case SrcOne:
- c->src.bytes = 1;
- c->src.val = 1;
- break;
- }
-
- /*
- * Decode and fetch the second source operand: register, memory
- * or immediate.
- */
- switch (c->d & Src2Mask) {
- case Src2None:
- break;
- case Src2CL:
- c->src2.bytes = 1;
- c->src2.val = c->regs[VCPU_REGS_RCX] & 0x8;
- break;
- case Src2ImmByte:
- c->src2.type = OP_IMM;
- c->src2.ptr = (unsigned long *)c->eip;
- c->src2.bytes = 1;
- c->src2.val = insn_fetch(u8, 1, c->eip);
- break;
- case Src2Imm16:
- c->src2.type = OP_IMM;
- c->src2.ptr = (unsigned long *)c->eip;
- c->src2.bytes = 2;
- c->src2.val = insn_fetch(u16, 2, c->eip);
- break;
- case Src2One:
- c->src2.bytes = 1;
- c->src2.val = 1;
- break;
- }
-
- /* Decode and fetch the destination operand: register or memory. */
- switch (c->d & DstMask) {
- case ImplicitOps:
- /* Special instructions do their own operand decoding. */
- return 0;
- case DstReg:
- decode_register_operand(&c->dst, c,
- c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
- break;
- case DstMem:
- if ((c->d & ModRM) && c->modrm_mod == 3) {
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->dst.type = OP_REG;
- c->dst.val = c->dst.orig_val = c->modrm_val;
- c->dst.ptr = c->modrm_ptr;
- break;
- }
- c->dst.type = OP_MEM;
- break;
- case DstAcc:
- c->dst.type = OP_REG;
- c->dst.bytes = c->op_bytes;
- c->dst.ptr = &c->regs[VCPU_REGS_RAX];
- switch (c->op_bytes) {
- case 1:
- c->dst.val = *(u8 *)c->dst.ptr;
- break;
- case 2:
- c->dst.val = *(u16 *)c->dst.ptr;
- break;
- case 4:
- c->dst.val = *(u32 *)c->dst.ptr;
- break;
- }
- c->dst.orig_val = c->dst.val;
- break;
- }
-
- if (c->rip_relative)
- c->modrm_ea += c->eip;
-
-done:
- return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
-}
-
-static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
-{
- struct decode_cache *c = &ctxt->decode;
-
- c->dst.type = OP_MEM;
- c->dst.bytes = c->op_bytes;
- c->dst.val = c->src.val;
- register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
- c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
- c->regs[VCPU_REGS_RSP]);
-}
-
-static int emulate_pop(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops,
- void *dest, int len)
-{
- struct decode_cache *c = &ctxt->decode;
- int rc;
-
- rc = ops->read_emulated(register_address(c, ss_base(ctxt),
- c->regs[VCPU_REGS_RSP]),
- dest, len, ctxt->vcpu);
- if (rc != 0)
- return rc;
-
- register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
- return rc;
-}
-
-static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
- int rc;
-
- rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
- if (rc != 0)
- return rc;
- return 0;
-}
-
-static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
-{
- struct decode_cache *c = &ctxt->decode;
- switch (c->modrm_reg) {
- case 0: /* rol */
- emulate_2op_SrcB("rol", c->src, c->dst, ctxt->eflags);
- break;
- case 1: /* ror */
- emulate_2op_SrcB("ror", c->src, c->dst, ctxt->eflags);
- break;
- case 2: /* rcl */
- emulate_2op_SrcB("rcl", c->src, c->dst, ctxt->eflags);
- break;
- case 3: /* rcr */
- emulate_2op_SrcB("rcr", c->src, c->dst, ctxt->eflags);
- break;
- case 4: /* sal/shl */
- case 6: /* sal/shl */
- emulate_2op_SrcB("sal", c->src, c->dst, ctxt->eflags);
- break;
- case 5: /* shr */
- emulate_2op_SrcB("shr", c->src, c->dst, ctxt->eflags);
- break;
- case 7: /* sar */
- emulate_2op_SrcB("sar", c->src, c->dst, ctxt->eflags);
- break;
- }
-}
-
-static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
- int rc = 0;
-
- switch (c->modrm_reg) {
- case 0 ... 1: /* test */
- emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
- break;
- case 2: /* not */
- c->dst.val = ~c->dst.val;
- break;
- case 3: /* neg */
- emulate_1op("neg", c->dst, ctxt->eflags);
- break;
- default:
- DPRINTF("Cannot emulate %02x\n", c->b);
- rc = X86EMUL_UNHANDLEABLE;
- break;
- }
- return rc;
-}
-
-static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
-
- switch (c->modrm_reg) {
- case 0: /* inc */
- emulate_1op("inc", c->dst, ctxt->eflags);
- break;
- case 1: /* dec */
- emulate_1op("dec", c->dst, ctxt->eflags);
- break;
- case 2: /* call near abs */ {
- long int old_eip;
- old_eip = c->eip;
- c->eip = c->src.val;
- c->src.val = old_eip;
- emulate_push(ctxt);
- break;
- }
- case 4: /* jmp abs */
- c->eip = c->src.val;
- break;
- case 6: /* push */
- emulate_push(ctxt);
- break;
- }
- return 0;
-}
-
-static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops,
- unsigned long memop)
-{
- struct decode_cache *c = &ctxt->decode;
- u64 old, new;
- int rc;
-
- rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
- if (rc != 0)
- return rc;
-
- if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
- ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
-
- c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
- c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
- ctxt->eflags &= ~EFLG_ZF;
-
- } else {
- new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
- (u32) c->regs[VCPU_REGS_RBX];
-
- rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
- if (rc != 0)
- return rc;
- ctxt->eflags |= EFLG_ZF;
- }
- return 0;
-}
-
-static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- struct decode_cache *c = &ctxt->decode;
- int rc;
- unsigned long cs;
-
- rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
- if (rc)
- return rc;
- if (c->op_bytes == 4)
- c->eip = (u32)c->eip;
- rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
- if (rc)
- return rc;
- rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
- return rc;
-}
-
-static inline int writeback(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- int rc;
- struct decode_cache *c = &ctxt->decode;
-
- switch (c->dst.type) {
- case OP_REG:
- /* The 4-byte case *is* correct:
- * in 64-bit mode we zero-extend.
- */
- switch (c->dst.bytes) {
- case 1:
- *(u8 *)c->dst.ptr = (u8)c->dst.val;
- break;
- case 2:
- *(u16 *)c->dst.ptr = (u16)c->dst.val;
- break;
- case 4:
- *c->dst.ptr = (u32)c->dst.val;
- break; /* 64b: zero-ext */
- case 8:
- *c->dst.ptr = c->dst.val;
- break;
- }
- break;
- case OP_MEM:
- if (c->lock_prefix)
- rc = ops->cmpxchg_emulated(
- (unsigned long)c->dst.ptr,
- &c->dst.orig_val,
- &c->dst.val,
- c->dst.bytes,
- ctxt->vcpu);
- else
- rc = ops->write_emulated(
- (unsigned long)c->dst.ptr,
- &c->dst.val,
- c->dst.bytes,
- ctxt->vcpu);
- if (rc != 0)
- return rc;
- break;
- case OP_NONE:
- /* no writeback */
- break;
- default:
- break;
- }
- return 0;
-}
-
-static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
-{
- u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
- /*
- * an sti; sti; sequence only disable interrupts for the first
- * instruction. So, if the last instruction, be it emulated or
- * not, left the system with the INT_STI flag enabled, it
- * means that the last instruction is an sti. We should not
- * leave the flag on in this case. The same goes for mov ss
- */
- if (!(int_shadow & mask))
- ctxt->interruptibility = mask;
-}
-
-int
-x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
-{
- unsigned long memop = 0;
- u64 msr_data;
- unsigned long saved_eip = 0;
- struct decode_cache *c = &ctxt->decode;
- unsigned int port;
- int io_dir_in;
- int rc = 0;
-
- ctxt->interruptibility = 0;
-
- /* Shadow copy of register state. Committed on successful emulation.
- * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
- * modify them.
- */
-
- memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
- saved_eip = c->eip;
-
- if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
- memop = c->modrm_ea;
-
- if (c->rep_prefix && (c->d & String)) {
- /* All REP prefixes have the same first termination condition */
- if (c->regs[VCPU_REGS_RCX] == 0) {
- kvm_rip_write(ctxt->vcpu, c->eip);
- goto done;
- }
- /* The second termination condition only applies for REPE
- * and REPNE. Test if the repeat string operation prefix is
- * REPE/REPZ or REPNE/REPNZ and if it's the case it tests the
- * corresponding termination condition according to:
- * - if REPE/REPZ and ZF = 0 then done
- * - if REPNE/REPNZ and ZF = 1 then done
- */
- if ((c->b == 0xa6) || (c->b == 0xa7) ||
- (c->b == 0xae) || (c->b == 0xaf)) {
- if ((c->rep_prefix == REPE_PREFIX) &&
- ((ctxt->eflags & EFLG_ZF) == 0)) {
- kvm_rip_write(ctxt->vcpu, c->eip);
- goto done;
- }
- if ((c->rep_prefix == REPNE_PREFIX) &&
- ((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
- kvm_rip_write(ctxt->vcpu, c->eip);
- goto done;
- }
- }
- c->regs[VCPU_REGS_RCX]--;
- c->eip = kvm_rip_read(ctxt->vcpu);
- }
-
- if (c->src.type == OP_MEM) {
- c->src.ptr = (unsigned long *)memop;
- c->src.val = 0;
- rc = ops->read_emulated((unsigned long)c->src.ptr,
- &c->src.val,
- c->src.bytes,
- ctxt->vcpu);
- if (rc != 0)
- goto done;
- c->src.orig_val = c->src.val;
- }
-
- if ((c->d & DstMask) == ImplicitOps)
- goto special_insn;
-
-
- if (c->dst.type == OP_MEM) {
- c->dst.ptr = (unsigned long *)memop;
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->dst.val = 0;
- if (c->d & BitOp) {
- unsigned long mask = ~(c->dst.bytes * 8 - 1);
-
- c->dst.ptr = (void *)c->dst.ptr +
- (c->src.val & mask) / 8;
- }
- if (!(c->d & Mov) &&
- /* optimisation - avoid slow emulated read */
- ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
- &c->dst.val,
- c->dst.bytes, ctxt->vcpu)) != 0))
- goto done;
- }
- c->dst.orig_val = c->dst.val;
-
-special_insn:
-
- if (c->twobyte)
- goto twobyte_insn;
-
- switch (c->b) {
- case 0x00 ... 0x05:
- add: /* add */
- emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
- break;
- case 0x08 ... 0x0d:
- or: /* or */
- emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
- break;
- case 0x10 ... 0x15:
- adc: /* adc */
- emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
- break;
- case 0x18 ... 0x1d:
- sbb: /* sbb */
- emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
- break;
- case 0x20 ... 0x25:
- and: /* and */
- emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
- break;
- case 0x28 ... 0x2d:
- sub: /* sub */
- emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
- break;
- case 0x30 ... 0x35:
- xor: /* xor */
- emulate_2op_SrcV("xor", c->src, c->dst, ctxt->eflags);
- break;
- case 0x38 ... 0x3d:
- cmp: /* cmp */
- emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
- break;
- case 0x40 ... 0x47: /* inc r16/r32 */
- emulate_1op("inc", c->dst, ctxt->eflags);
- break;
- case 0x48 ... 0x4f: /* dec r16/r32 */
- emulate_1op("dec", c->dst, ctxt->eflags);
- break;
- case 0x50 ... 0x57: /* push reg */
- emulate_push(ctxt);
- break;
- case 0x58 ... 0x5f: /* pop reg */
- pop_instruction:
- rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
- if (rc != 0)
- goto done;
- break;
- case 0x63: /* movsxd */
- if (ctxt->mode != X86EMUL_MODE_PROT64)
- goto cannot_emulate;
- c->dst.val = (s32) c->src.val;
- break;
- case 0x68: /* push imm */
- case 0x6a: /* push imm8 */
- emulate_push(ctxt);
- break;
- case 0x6c: /* insb */
- case 0x6d: /* insw/insd */
- if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
- 1,
- (c->d & ByteOp) ? 1 : c->op_bytes,
- c->rep_prefix ?
- address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
- (ctxt->eflags & EFLG_DF),
- register_address(c, es_base(ctxt),
- c->regs[VCPU_REGS_RDI]),
- c->rep_prefix,
- c->regs[VCPU_REGS_RDX]) == 0) {
- c->eip = saved_eip;
- return -1;
- }
- return 0;
- case 0x6e: /* outsb */
- case 0x6f: /* outsw/outsd */
- if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
- 0,
- (c->d & ByteOp) ? 1 : c->op_bytes,
- c->rep_prefix ?
- address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
- (ctxt->eflags & EFLG_DF),
- register_address(c,
- seg_override_base(ctxt, c),
- c->regs[VCPU_REGS_RSI]),
- c->rep_prefix,
- c->regs[VCPU_REGS_RDX]) == 0) {
- c->eip = saved_eip;
- return -1;
- }
- return 0;
- case 0x70 ... 0x7f: /* jcc (short) */
- if (test_cc(c->b, ctxt->eflags))
- jmp_rel(c, c->src.val);
- break;
- case 0x80 ... 0x83: /* Grp1 */
- switch (c->modrm_reg) {
- case 0:
- goto add;
- case 1:
- goto or;
- case 2:
- goto adc;
- case 3:
- goto sbb;
- case 4:
- goto and;
- case 5:
- goto sub;
- case 6:
- goto xor;
- case 7:
- goto cmp;
- }
- break;
- case 0x84 ... 0x85:
- emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
- break;
- case 0x86 ... 0x87: /* xchg */
- xchg:
- /* Write back the register source. */
- switch (c->dst.bytes) {
- case 1:
- *(u8 *) c->src.ptr = (u8) c->dst.val;
- break;
- case 2:
- *(u16 *) c->src.ptr = (u16) c->dst.val;
- break;
- case 4:
- *c->src.ptr = (u32) c->dst.val;
- break; /* 64b reg: zero-extend */
- case 8:
- *c->src.ptr = c->dst.val;
- break;
- }
- /*
- * Write back the memory destination with implicit LOCK
- * prefix.
- */
- c->dst.val = c->src.val;
- c->lock_prefix = 1;
- break;
- case 0x88 ... 0x8b: /* mov */
- goto mov;
- case 0x8c: { /* mov r/m, sreg */
- struct kvm_segment segreg;
-
- if (c->modrm_reg <= 5)
- kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
- else {
- printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
- c->modrm);
- goto cannot_emulate;
- }
- c->dst.val = segreg.selector;
- break;
- }
- case 0x8d: /* lea r16/r32, m */
- c->dst.val = c->modrm_ea;
- break;
- case 0x8e: { /* mov seg, r/m16 */
- uint16_t sel;
- int type_bits;
- int err;
-
- sel = c->src.val;
- if (c->modrm_reg == VCPU_SREG_SS)
- toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
-
- if (c->modrm_reg <= 5) {
- type_bits = (c->modrm_reg == 1) ? 9 : 1;
- err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
- type_bits, c->modrm_reg);
- } else {
- printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
- c->modrm);
- goto cannot_emulate;
- }
-
- if (err < 0)
- goto cannot_emulate;
-
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- }
- case 0x8f: /* pop (sole member of Grp1a) */
- rc = emulate_grp1a(ctxt, ops);
- if (rc != 0)
- goto done;
- break;
- case 0x90: /* nop / xchg r8,rax */
- if (!(c->rex_prefix & 1)) { /* nop */
- c->dst.type = OP_NONE;
- break;
- }
- case 0x91 ... 0x97: /* xchg reg,rax */
- c->src.type = c->dst.type = OP_REG;
- c->src.bytes = c->dst.bytes = c->op_bytes;
- c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
- c->src.val = *(c->src.ptr);
- goto xchg;
- case 0x9c: /* pushf */
- c->src.val = (unsigned long) ctxt->eflags;
- emulate_push(ctxt);
- break;
- case 0x9d: /* popf */
- c->dst.type = OP_REG;
- c->dst.ptr = (unsigned long *) &ctxt->eflags;
- c->dst.bytes = c->op_bytes;
- goto pop_instruction;
- case 0xa0 ... 0xa1: /* mov */
- c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
- c->dst.val = c->src.val;
- break;
- case 0xa2 ... 0xa3: /* mov */
- c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
- break;
- case 0xa4 ... 0xa5: /* movs */
- c->dst.type = OP_MEM;
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->dst.ptr = (unsigned long *)register_address(c,
- es_base(ctxt),
- c->regs[VCPU_REGS_RDI]);
- if ((rc = ops->read_emulated(register_address(c,
- seg_override_base(ctxt, c),
- c->regs[VCPU_REGS_RSI]),
- &c->dst.val,
- c->dst.bytes, ctxt->vcpu)) != 0)
- goto done;
- register_address_increment(c, &c->regs[VCPU_REGS_RSI],
- (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
- : c->dst.bytes);
- register_address_increment(c, &c->regs[VCPU_REGS_RDI],
- (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
- : c->dst.bytes);
- break;
- case 0xa6 ... 0xa7: /* cmps */
- c->src.type = OP_NONE; /* Disable writeback. */
- c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->src.ptr = (unsigned long *)register_address(c,
- seg_override_base(ctxt, c),
- c->regs[VCPU_REGS_RSI]);
- if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
- &c->src.val,
- c->src.bytes,
- ctxt->vcpu)) != 0)
- goto done;
-
- c->dst.type = OP_NONE; /* Disable writeback. */
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->dst.ptr = (unsigned long *)register_address(c,
- es_base(ctxt),
- c->regs[VCPU_REGS_RDI]);
- if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
- &c->dst.val,
- c->dst.bytes,
- ctxt->vcpu)) != 0)
- goto done;
-
- DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
-
- emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-
- register_address_increment(c, &c->regs[VCPU_REGS_RSI],
- (ctxt->eflags & EFLG_DF) ? -c->src.bytes
- : c->src.bytes);
- register_address_increment(c, &c->regs[VCPU_REGS_RDI],
- (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
- : c->dst.bytes);
-
- break;
- case 0xaa ... 0xab: /* stos */
- c->dst.type = OP_MEM;
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->dst.ptr = (unsigned long *)register_address(c,
- es_base(ctxt),
- c->regs[VCPU_REGS_RDI]);
- c->dst.val = c->regs[VCPU_REGS_RAX];
- register_address_increment(c, &c->regs[VCPU_REGS_RDI],
- (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
- : c->dst.bytes);
- break;
- case 0xac ... 0xad: /* lods */
- c->dst.type = OP_REG;
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
- c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
- if ((rc = ops->read_emulated(register_address(c,
- seg_override_base(ctxt, c),
- c->regs[VCPU_REGS_RSI]),
- &c->dst.val,
- c->dst.bytes,
- ctxt->vcpu)) != 0)
- goto done;
- register_address_increment(c, &c->regs[VCPU_REGS_RSI],
- (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
- : c->dst.bytes);
- break;
- case 0xae ... 0xaf: /* scas */
- DPRINTF("Urk! I don't handle SCAS.\n");
- goto cannot_emulate;
- case 0xb0 ... 0xbf: /* mov r, imm */
- goto mov;
- case 0xc0 ... 0xc1:
- emulate_grp2(ctxt);
- break;
- case 0xc3: /* ret */
- c->dst.type = OP_REG;
- c->dst.ptr = &c->eip;
- c->dst.bytes = c->op_bytes;
- goto pop_instruction;
- case 0xc6 ... 0xc7: /* mov (sole member of Grp11) */
- mov:
- c->dst.val = c->src.val;
- break;
- case 0xcb: /* ret far */
- rc = emulate_ret_far(ctxt, ops);
- if (rc)
- goto done;
- break;
- case 0xd0 ... 0xd1: /* Grp2 */
- c->src.val = 1;
- emulate_grp2(ctxt);
- break;
- case 0xd2 ... 0xd3: /* Grp2 */
- c->src.val = c->regs[VCPU_REGS_RCX];
- emulate_grp2(ctxt);
- break;
- case 0xe4: /* inb */
- case 0xe5: /* in */
- port = c->src.val;
- io_dir_in = 1;
- goto do_io;
- case 0xe6: /* outb */
- case 0xe7: /* out */
- port = c->src.val;
- io_dir_in = 0;
- goto do_io;
- case 0xe8: /* call (near) */ {
- long int rel = c->src.val;
- c->src.val = (unsigned long) c->eip;
- jmp_rel(c, rel);
- emulate_push(ctxt);
- break;
- }
- case 0xe9: /* jmp rel */
- goto jmp;
- case 0xea: /* jmp far */
- if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
- VCPU_SREG_CS) < 0) {
- DPRINTF("jmp far: Failed to load CS descriptor\n");
- goto cannot_emulate;
- }
-
- c->eip = c->src.val;
- break;
- case 0xeb:
- jmp: /* jmp rel short */
- jmp_rel(c, c->src.val);
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xec: /* in al,dx */
- case 0xed: /* in (e/r)ax,dx */
- port = c->regs[VCPU_REGS_RDX];
- io_dir_in = 1;
- goto do_io;
- case 0xee: /* out al,dx */
- case 0xef: /* out (e/r)ax,dx */
- port = c->regs[VCPU_REGS_RDX];
- io_dir_in = 0;
- do_io: if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
- (c->d & ByteOp) ? 1 : c->op_bytes,
- port) != 0) {
- c->eip = saved_eip;
- goto cannot_emulate;
- }
- break;
- case 0xf4: /* hlt */
- ctxt->vcpu->arch.halt_request = 1;
- break;
- case 0xf5: /* cmc */
- /* complement carry flag from eflags reg */
- ctxt->eflags ^= EFLG_CF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xf6 ... 0xf7: /* Grp3 */
- rc = emulate_grp3(ctxt, ops);
- if (rc != 0)
- goto done;
- break;
- case 0xf8: /* clc */
- ctxt->eflags &= ~EFLG_CF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xfa: /* cli */
- ctxt->eflags &= ~X86_EFLAGS_IF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xfb: /* sti */
- toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
- ctxt->eflags |= X86_EFLAGS_IF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xfc: /* cld */
- ctxt->eflags &= ~EFLG_DF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xfd: /* std */
- ctxt->eflags |= EFLG_DF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- case 0xfe ... 0xff: /* Grp4/Grp5 */
- rc = emulate_grp45(ctxt, ops);
- if (rc != 0)
- goto done;
- break;
- }
-
-writeback:
- rc = writeback(ctxt, ops);
- if (rc != 0)
- goto done;
-
- /* Commit shadow register state. */
- memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
- kvm_rip_write(ctxt->vcpu, c->eip);
-
-done:
- if (rc == X86EMUL_UNHANDLEABLE) {
- c->eip = saved_eip;
- return -1;
- }
- return 0;
-
-twobyte_insn:
- switch (c->b) {
- case 0x01: /* lgdt, lidt, lmsw */
- switch (c->modrm_reg) {
- u16 size;
- unsigned long address;
-
- case 0: /* vmcall */
- if (c->modrm_mod != 3 || c->modrm_rm != 1)
- goto cannot_emulate;
-
- rc = kvm_fix_hypercall(ctxt->vcpu);
- if (rc)
- goto done;
-
- /* Let the processor re-execute the fixed hypercall */
- c->eip = kvm_rip_read(ctxt->vcpu);
- /* Disable writeback. */
- c->dst.type = OP_NONE;
- break;
- case 2: /* lgdt */
- rc = read_descriptor(ctxt, ops, c->src.ptr,
- &size, &address, c->op_bytes);
- if (rc)
- goto done;
- realmode_lgdt(ctxt->vcpu, size, address);
- /* Disable writeback. */
- c->dst.type = OP_NONE;
- break;
- case 3: /* lidt/vmmcall */
- if (c->modrm_mod == 3) {
- switch (c->modrm_rm) {
- case 1:
- rc = kvm_fix_hypercall(ctxt->vcpu);
- if (rc)
- goto done;
- break;
- default:
- goto cannot_emulate;
- }
- } else {
- rc = read_descriptor(ctxt, ops, c->src.ptr,
- &size, &address,
- c->op_bytes);
- if (rc)
- goto done;
- realmode_lidt(ctxt->vcpu, size, address);
- }
- /* Disable writeback. */
- c->dst.type = OP_NONE;
- break;
- case 4: /* smsw */
- c->dst.bytes = 2;
- c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
- break;
- case 6: /* lmsw */
- realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
- &ctxt->eflags);
- c->dst.type = OP_NONE;
- break;
- case 7: /* invlpg*/
- emulate_invlpg(ctxt->vcpu, memop);
- /* Disable writeback. */
- c->dst.type = OP_NONE;
- break;
- default:
- goto cannot_emulate;
- }
- break;
- case 0x06:
- emulate_clts(ctxt->vcpu);
- c->dst.type = OP_NONE;
- break;
- case 0x08: /* invd */
- case 0x09: /* wbinvd */
- case 0x0d: /* GrpP (prefetch) */
- case 0x18: /* Grp16 (prefetch/nop) */
- c->dst.type = OP_NONE;
- break;
- case 0x20: /* mov cr, reg */
- if (c->modrm_mod != 3)
- goto cannot_emulate;
- c->regs[c->modrm_rm] =
- realmode_get_cr(ctxt->vcpu, c->modrm_reg);
- c->dst.type = OP_NONE; /* no writeback */
- break;
- case 0x21: /* mov from dr to reg */
- if (c->modrm_mod != 3)
- goto cannot_emulate;
- rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
- if (rc)
- goto cannot_emulate;
- c->dst.type = OP_NONE; /* no writeback */
- break;
- case 0x22: /* mov reg, cr */
- if (c->modrm_mod != 3)
- goto cannot_emulate;
- realmode_set_cr(ctxt->vcpu,
- c->modrm_reg, c->modrm_val, &ctxt->eflags);
- c->dst.type = OP_NONE;
- break;
- case 0x23: /* mov from reg to dr */
- if (c->modrm_mod != 3)
- goto cannot_emulate;
- rc = emulator_set_dr(ctxt, c->modrm_reg,
- c->regs[c->modrm_rm]);
- if (rc)
- goto cannot_emulate;
- c->dst.type = OP_NONE; /* no writeback */
- break;
- case 0x30:
- /* wrmsr */
- msr_data = (u32)c->regs[VCPU_REGS_RAX]
- | ((u64)c->regs[VCPU_REGS_RDX] << 32);
- rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
- if (rc) {
- kvm_inject_gp(ctxt->vcpu, 0);
- c->eip = kvm_rip_read(ctxt->vcpu);
- }
- rc = X86EMUL_CONTINUE;
- c->dst.type = OP_NONE;
- break;
- case 0x32:
- /* rdmsr */
- rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
- if (rc) {
- kvm_inject_gp(ctxt->vcpu, 0);
- c->eip = kvm_rip_read(ctxt->vcpu);
- } else {
- c->regs[VCPU_REGS_RAX] = (u32)msr_data;
- c->regs[VCPU_REGS_RDX] = msr_data >> 32;
- }
- rc = X86EMUL_CONTINUE;
- c->dst.type = OP_NONE;
- break;
- case 0x40 ... 0x4f: /* cmov */
- c->dst.val = c->dst.orig_val = c->src.val;
- if (!test_cc(c->b, ctxt->eflags))
- c->dst.type = OP_NONE; /* no writeback */
- break;
- case 0x80 ... 0x8f: /* jnz rel, etc*/
- if (test_cc(c->b, ctxt->eflags))
- jmp_rel(c, c->src.val);
- c->dst.type = OP_NONE;
- break;
- case 0xa3:
- bt: /* bt */
- c->dst.type = OP_NONE;
- /* only subword offset */
- c->src.val &= (c->dst.bytes << 3) - 1;
- emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
- break;
- case 0xa4: /* shld imm8, r, r/m */
- case 0xa5: /* shld cl, r, r/m */
- emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
- break;
- case 0xab:
- bts: /* bts */
- /* only subword offset */
- c->src.val &= (c->dst.bytes << 3) - 1;
- emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
- break;
- case 0xac: /* shrd imm8, r, r/m */
- case 0xad: /* shrd cl, r, r/m */
- emulate_2op_cl("shrd", c->src2, c->src, c->dst, ctxt->eflags);
- break;
- case 0xae: /* clflush */
- break;
- case 0xb0 ... 0xb1: /* cmpxchg */
- /*
- * Save real source value, then compare EAX against
- * destination.
- */
- c->src.orig_val = c->src.val;
- c->src.val = c->regs[VCPU_REGS_RAX];
- emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
- if (ctxt->eflags & EFLG_ZF) {
- /* Success: write back to memory. */
- c->dst.val = c->src.orig_val;
- } else {
- /* Failure: write the value we saw to EAX. */
- c->dst.type = OP_REG;
- c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
- }
- break;
- case 0xb3:
- btr: /* btr */
- /* only subword offset */
- c->src.val &= (c->dst.bytes << 3) - 1;
- emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
- break;
- case 0xb6 ... 0xb7: /* movzx */
- c->dst.bytes = c->op_bytes;
- c->dst.val = (c->d & ByteOp) ? (u8) c->src.val
- : (u16) c->src.val;
- break;
- case 0xba: /* Grp8 */
- switch (c->modrm_reg & 3) {
- case 0:
- goto bt;
- case 1:
- goto bts;
- case 2:
- goto btr;
- case 3:
- goto btc;
- }
- break;
- case 0xbb:
- btc: /* btc */
- /* only subword offset */
- c->src.val &= (c->dst.bytes << 3) - 1;
- emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
- break;
- case 0xbe ... 0xbf: /* movsx */
- c->dst.bytes = c->op_bytes;
- c->dst.val = (c->d & ByteOp) ? (s8) c->src.val :
- (s16) c->src.val;
- break;
- case 0xc3: /* movnti */
- c->dst.bytes = c->op_bytes;
- c->dst.val = (c->op_bytes == 4) ? (u32) c->src.val :
- (u64) c->src.val;
- break;
- case 0xc7: /* Grp9 (cmpxchg8b) */
- rc = emulate_grp9(ctxt, ops, memop);
- if (rc != 0)
- goto done;
- c->dst.type = OP_NONE;
- break;
- }
- goto writeback;
-
-cannot_emulate:
- DPRINTF("Cannot emulate %02x\n", c->b);
- c->eip = saved_eip;
- return -1;
-}
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 07c3189..9e60920 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -9,6 +9,8 @@
lib-y += usercopy_$(BITS).o getuser.o putuser.o
lib-y += memcpy_$(BITS).o
+obj-y += msr-reg.o msr-reg-export.o
+
ifeq ($(CONFIG_X86_32),y)
obj-y += atomic64_32.o
lib-y += checksum_32.o
diff --git a/arch/x86/lib/msr-reg-export.c b/arch/x86/lib/msr-reg-export.c
new file mode 100644
index 0000000..a311cc5
--- /dev/null
+++ b/arch/x86/lib/msr-reg-export.c
@@ -0,0 +1,5 @@
+#include <linux/module.h>
+#include <asm/msr.h>
+
+EXPORT_SYMBOL(native_rdmsr_safe_regs);
+EXPORT_SYMBOL(native_wrmsr_safe_regs);
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
new file mode 100644
index 0000000..69fa106
--- /dev/null
+++ b/arch/x86/lib/msr-reg.S
@@ -0,0 +1,102 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <asm/dwarf2.h>
+#include <asm/asm.h>
+#include <asm/msr.h>
+
+#ifdef CONFIG_X86_64
+/*
+ * int native_{rdmsr,wrmsr}_safe_regs(u32 gprs[8]);
+ *
+ * reg layout: u32 gprs[eax, ecx, edx, ebx, esp, ebp, esi, edi]
+ *
+ */
+.macro op_safe_regs op
+ENTRY(native_\op\()_safe_regs)
+ CFI_STARTPROC
+ pushq_cfi %rbx
+ pushq_cfi %rbp
+ movq %rdi, %r10 /* Save pointer */
+ xorl %r11d, %r11d /* Return value */
+ movl (%rdi), %eax
+ movl 4(%rdi), %ecx
+ movl 8(%rdi), %edx
+ movl 12(%rdi), %ebx
+ movl 20(%rdi), %ebp
+ movl 24(%rdi), %esi
+ movl 28(%rdi), %edi
+ CFI_REMEMBER_STATE
+1: \op
+2: movl %eax, (%r10)
+ movl %r11d, %eax /* Return value */
+ movl %ecx, 4(%r10)
+ movl %edx, 8(%r10)
+ movl %ebx, 12(%r10)
+ movl %ebp, 20(%r10)
+ movl %esi, 24(%r10)
+ movl %edi, 28(%r10)
+ popq_cfi %rbp
+ popq_cfi %rbx
+ ret
+3:
+ CFI_RESTORE_STATE
+ movl $-EIO, %r11d
+ jmp 2b
+
+ _ASM_EXTABLE(1b, 3b)
+ CFI_ENDPROC
+ENDPROC(native_\op\()_safe_regs)
+.endm
+
+#else /* X86_32 */
+
+.macro op_safe_regs op
+ENTRY(native_\op\()_safe_regs)
+ CFI_STARTPROC
+ pushl_cfi %ebx
+ pushl_cfi %ebp
+ pushl_cfi %esi
+ pushl_cfi %edi
+ pushl_cfi $0 /* Return value */
+ pushl_cfi %eax
+ movl 4(%eax), %ecx
+ movl 8(%eax), %edx
+ movl 12(%eax), %ebx
+ movl 20(%eax), %ebp
+ movl 24(%eax), %esi
+ movl 28(%eax), %edi
+ movl (%eax), %eax
+ CFI_REMEMBER_STATE
+1: \op
+2: pushl_cfi %eax
+ movl 4(%esp), %eax
+ popl_cfi (%eax)
+ addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
+ movl %ecx, 4(%eax)
+ movl %edx, 8(%eax)
+ movl %ebx, 12(%eax)
+ movl %ebp, 20(%eax)
+ movl %esi, 24(%eax)
+ movl %edi, 28(%eax)
+ popl_cfi %eax
+ popl_cfi %edi
+ popl_cfi %esi
+ popl_cfi %ebp
+ popl_cfi %ebx
+ ret
+3:
+ CFI_RESTORE_STATE
+ movl $-EIO, 4(%esp)
+ jmp 2b
+
+ _ASM_EXTABLE(1b, 3b)
+ CFI_ENDPROC
+ENDPROC(native_\op\()_safe_regs)
+.endm
+
+#endif
+
+op_safe_regs rdmsr
+op_safe_regs wrmsr
+
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index caa24ac..33a1e3c 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -175,3 +175,52 @@
return err ? err : rv.err;
}
EXPORT_SYMBOL(wrmsr_safe_on_cpu);
+
+/*
+ * These variants are significantly slower, but allows control over
+ * the entire 32-bit GPR set.
+ */
+struct msr_regs_info {
+ u32 *regs;
+ int err;
+};
+
+static void __rdmsr_safe_regs_on_cpu(void *info)
+{
+ struct msr_regs_info *rv = info;
+
+ rv->err = rdmsr_safe_regs(rv->regs);
+}
+
+static void __wrmsr_safe_regs_on_cpu(void *info)
+{
+ struct msr_regs_info *rv = info;
+
+ rv->err = wrmsr_safe_regs(rv->regs);
+}
+
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+{
+ int err;
+ struct msr_regs_info rv;
+
+ rv.regs = regs;
+ rv.err = -EIO;
+ err = smp_call_function_single(cpu, __rdmsr_safe_regs_on_cpu, &rv, 1);
+
+ return err ? err : rv.err;
+}
+EXPORT_SYMBOL(rdmsr_safe_regs_on_cpu);
+
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+{
+ int err;
+ struct msr_regs_info rv;
+
+ rv.regs = regs;
+ rv.err = -EIO;
+ err = smp_call_function_single(cpu, __wrmsr_safe_regs_on_cpu, &rv, 1);
+
+ return err ? err : rv.err;
+}
+EXPORT_SYMBOL(wrmsr_safe_regs_on_cpu);
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index eefdeee..9b5a9f5 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,5 +1,9 @@
obj-y := init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
- pat.o pgtable.o gup.o
+ pat.o pgtable.o physaddr.o gup.o
+
+# Make sure __phys_addr has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_physaddr.o := $(nostackp)
obj-$(CONFIG_SMP) += tlb.o
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index bfae139..775a020 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -285,26 +285,25 @@
tsk->thread.screen_bitmap |= 1 << bit;
}
+static bool low_pfn(unsigned long pfn)
+{
+ return pfn < max_low_pfn;
+}
+
static void dump_pagetable(unsigned long address)
{
- __typeof__(pte_val(__pte(0))) page;
-
- page = read_cr3();
- page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
+ pgd_t *base = __va(read_cr3());
+ pgd_t *pgd = &base[pgd_index(address)];
+ pmd_t *pmd;
+ pte_t *pte;
#ifdef CONFIG_X86_PAE
- printk("*pdpt = %016Lx ", page);
- if ((page >> PAGE_SHIFT) < max_low_pfn
- && page & _PAGE_PRESENT) {
- page &= PAGE_MASK;
- page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
- & (PTRS_PER_PMD - 1)];
- printk(KERN_CONT "*pde = %016Lx ", page);
- page &= ~_PAGE_NX;
- }
-#else
- printk("*pde = %08lx ", page);
+ printk("*pdpt = %016Lx ", pgd_val(*pgd));
+ if (!low_pfn(pgd_val(*pgd) >> PAGE_SHIFT) || !pgd_present(*pgd))
+ goto out;
#endif
+ pmd = pmd_offset(pud_offset(pgd, address), address);
+ printk(KERN_CONT "*pde = %0*Lx ", sizeof(*pmd) * 2, (u64)pmd_val(*pmd));
/*
* We must not directly access the pte in the highpte
@@ -312,16 +311,12 @@
* And let's rather not kmap-atomic the pte, just in case
* it's allocated already:
*/
- if ((page >> PAGE_SHIFT) < max_low_pfn
- && (page & _PAGE_PRESENT)
- && !(page & _PAGE_PSE)) {
+ if (!low_pfn(pmd_pfn(*pmd)) || !pmd_present(*pmd) || pmd_large(*pmd))
+ goto out;
- page &= PAGE_MASK;
- page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
- & (PTRS_PER_PTE - 1)];
- printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
- }
-
+ pte = pte_offset_kernel(pmd, address);
+ printk("*pte = %0*Lx ", sizeof(*pte) * 2, (u64)pte_val(*pte));
+out:
printk("\n");
}
@@ -450,16 +445,12 @@
static void dump_pagetable(unsigned long address)
{
- pgd_t *pgd;
+ pgd_t *base = __va(read_cr3() & PHYSICAL_PAGE_MASK);
+ pgd_t *pgd = base + pgd_index(address);
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
- pgd = (pgd_t *)read_cr3();
-
- pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
-
- pgd += pgd_index(address);
if (bad_address(pgd))
goto bad;
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 2112ed5..63a6ba6 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -24,7 +24,7 @@
* no global lock is needed and because the kmap code must perform a global TLB
* invalidation when the kmap pool wraps.
*
- * However when holding an atomic kmap is is not legal to sleep, so atomic
+ * However when holding an atomic kmap it is not legal to sleep, so atomic
* kmaps are appropriate for short, tight code paths only.
*/
void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
@@ -104,6 +104,7 @@
EXPORT_SYMBOL(kmap_atomic);
EXPORT_SYMBOL(kunmap_atomic);
EXPORT_SYMBOL(kmap_atomic_prot);
+EXPORT_SYMBOL(kmap_atomic_to_page);
void __init set_highmem_pages_init(void)
{
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 6176fe8..ea56b8c 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -796,7 +796,7 @@
return ret;
#else
- reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+ reserve_bootmem(phys, len, flags);
#endif
if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 8a45093..04e1ad6 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -22,77 +22,7 @@
#include <asm/pgalloc.h>
#include <asm/pat.h>
-static inline int phys_addr_valid(resource_size_t addr)
-{
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
- return !(addr >> boot_cpu_data.x86_phys_bits);
-#else
- return 1;
-#endif
-}
-
-#ifdef CONFIG_X86_64
-
-unsigned long __phys_addr(unsigned long x)
-{
- if (x >= __START_KERNEL_map) {
- x -= __START_KERNEL_map;
- VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
- x += phys_base;
- } else {
- VIRTUAL_BUG_ON(x < PAGE_OFFSET);
- x -= PAGE_OFFSET;
- VIRTUAL_BUG_ON(!phys_addr_valid(x));
- }
- return x;
-}
-EXPORT_SYMBOL(__phys_addr);
-
-bool __virt_addr_valid(unsigned long x)
-{
- if (x >= __START_KERNEL_map) {
- x -= __START_KERNEL_map;
- if (x >= KERNEL_IMAGE_SIZE)
- return false;
- x += phys_base;
- } else {
- if (x < PAGE_OFFSET)
- return false;
- x -= PAGE_OFFSET;
- if (!phys_addr_valid(x))
- return false;
- }
-
- return pfn_valid(x >> PAGE_SHIFT);
-}
-EXPORT_SYMBOL(__virt_addr_valid);
-
-#else
-
-#ifdef CONFIG_DEBUG_VIRTUAL
-unsigned long __phys_addr(unsigned long x)
-{
- /* VMALLOC_* aren't constants */
- VIRTUAL_BUG_ON(x < PAGE_OFFSET);
- VIRTUAL_BUG_ON(__vmalloc_start_set && is_vmalloc_addr((void *) x));
- return x - PAGE_OFFSET;
-}
-EXPORT_SYMBOL(__phys_addr);
-#endif
-
-bool __virt_addr_valid(unsigned long x)
-{
- if (x < PAGE_OFFSET)
- return false;
- if (__vmalloc_start_set && is_vmalloc_addr((void *) x))
- return false;
- if (x >= FIXADDR_START)
- return false;
- return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
-}
-EXPORT_SYMBOL(__virt_addr_valid);
-
-#endif
+#include "physaddr.h"
int page_is_ram(unsigned long pagenr)
{
diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
index 2c55ed0..528bf95 100644
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -331,6 +331,20 @@
kmemcheck_shadow_set(shadow, size);
}
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+ enum kmemcheck_shadow status;
+ void *shadow;
+
+ shadow = kmemcheck_shadow_lookup(addr);
+ if (!shadow)
+ return true;
+
+ status = kmemcheck_shadow_test(shadow, size);
+
+ return status == KMEMCHECK_SHADOW_INITIALIZED;
+}
+
/* Access may cross page boundary */
static void kmemcheck_read(struct pt_regs *regs,
unsigned long addr, unsigned int size)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb..b2f7d3e 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -623,7 +623,8 @@
return ret;
if (flags != want_flags) {
- if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+ if (strict_prot ||
+ !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
free_memtype(paddr, paddr + size);
printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
" for %Lx-%Lx, got %s\n",
@@ -826,7 +827,7 @@
return 0;
}
-static struct seq_operations memtype_seq_ops = {
+static const struct seq_operations memtype_seq_ops = {
.start = memtype_seq_start,
.next = memtype_seq_next,
.stop = memtype_seq_stop,
diff --git a/arch/x86/mm/physaddr.c b/arch/x86/mm/physaddr.c
new file mode 100644
index 0000000..d2e2735
--- /dev/null
+++ b/arch/x86/mm/physaddr.c
@@ -0,0 +1,70 @@
+#include <linux/mmdebug.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+
+#include "physaddr.h"
+
+#ifdef CONFIG_X86_64
+
+unsigned long __phys_addr(unsigned long x)
+{
+ if (x >= __START_KERNEL_map) {
+ x -= __START_KERNEL_map;
+ VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
+ x += phys_base;
+ } else {
+ VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+ x -= PAGE_OFFSET;
+ VIRTUAL_BUG_ON(!phys_addr_valid(x));
+ }
+ return x;
+}
+EXPORT_SYMBOL(__phys_addr);
+
+bool __virt_addr_valid(unsigned long x)
+{
+ if (x >= __START_KERNEL_map) {
+ x -= __START_KERNEL_map;
+ if (x >= KERNEL_IMAGE_SIZE)
+ return false;
+ x += phys_base;
+ } else {
+ if (x < PAGE_OFFSET)
+ return false;
+ x -= PAGE_OFFSET;
+ if (!phys_addr_valid(x))
+ return false;
+ }
+
+ return pfn_valid(x >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
+#else
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+unsigned long __phys_addr(unsigned long x)
+{
+ /* VMALLOC_* aren't constants */
+ VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+ VIRTUAL_BUG_ON(__vmalloc_start_set && is_vmalloc_addr((void *) x));
+ return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+#endif
+
+bool __virt_addr_valid(unsigned long x)
+{
+ if (x < PAGE_OFFSET)
+ return false;
+ if (__vmalloc_start_set && is_vmalloc_addr((void *) x))
+ return false;
+ if (x >= FIXADDR_START)
+ return false;
+ return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
+#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/mm/physaddr.h b/arch/x86/mm/physaddr.h
new file mode 100644
index 0000000..a3cd5a0
--- /dev/null
+++ b/arch/x86/mm/physaddr.h
@@ -0,0 +1,10 @@
+#include <asm/processor.h>
+
+static inline int phys_addr_valid(resource_size_t addr)
+{
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+ return !(addr >> boot_cpu_data.x86_phys_bits);
+#else
+ return 1;
+#endif
+}
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 29a0e37..6f8aa33 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -215,7 +215,7 @@
goto out_fail;
if (num_memory_chunks == 0) {
- printk(KERN_WARNING
+ printk(KERN_DEBUG
"could not find any ACPI SRAT memory areas.\n");
goto out_fail;
}
@@ -277,7 +277,7 @@
}
return 1;
out_fail:
- printk(KERN_ERR "failed to get NUMA memory information from SRAT"
+ printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
" table\n");
return 0;
}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 89b9a5c..cb88b1a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -1,11 +1,14 @@
/**
* @file nmi_int.c
*
- * @remark Copyright 2002-2008 OProfile authors
+ * @remark Copyright 2002-2009 OProfile authors
* @remark Read the file COPYING
*
* @author John Levon <levon@movementarian.org>
* @author Robert Richter <robert.richter@amd.com>
+ * @author Barry Kasindorf <barry.kasindorf@amd.com>
+ * @author Jason Yeh <jason.yeh@amd.com>
+ * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
*/
#include <linux/init.h>
@@ -24,13 +27,35 @@
#include "op_counter.h"
#include "op_x86_model.h"
-static struct op_x86_model_spec const *model;
+static struct op_x86_model_spec *model;
static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
/* 0 == registered but off, 1 == registered and on */
static int nmi_enabled = 0;
+struct op_counter_config counter_config[OP_MAX_COUNTER];
+
+/* common functions */
+
+u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+ struct op_counter_config *counter_config)
+{
+ u64 val = 0;
+ u16 event = (u16)counter_config->event;
+
+ val |= ARCH_PERFMON_EVENTSEL_INT;
+ val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
+ val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
+ val |= (counter_config->unit_mask & 0xFF) << 8;
+ event &= model->event_mask ? model->event_mask : 0xFF;
+ val |= event & 0xFF;
+ val |= (event & 0x0F00) << 24;
+
+ return val;
+}
+
+
static int profile_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
@@ -52,186 +77,21 @@
static void nmi_cpu_save_registers(struct op_msrs *msrs)
{
- unsigned int const nr_ctrs = model->num_counters;
- unsigned int const nr_ctrls = model->num_controls;
struct op_msr *counters = msrs->counters;
struct op_msr *controls = msrs->controls;
unsigned int i;
- for (i = 0; i < nr_ctrs; ++i) {
- if (counters[i].addr) {
- rdmsr(counters[i].addr,
- counters[i].saved.low,
- counters[i].saved.high);
- }
+ for (i = 0; i < model->num_counters; ++i) {
+ if (counters[i].addr)
+ rdmsrl(counters[i].addr, counters[i].saved);
}
- for (i = 0; i < nr_ctrls; ++i) {
- if (controls[i].addr) {
- rdmsr(controls[i].addr,
- controls[i].saved.low,
- controls[i].saved.high);
- }
+ for (i = 0; i < model->num_controls; ++i) {
+ if (controls[i].addr)
+ rdmsrl(controls[i].addr, controls[i].saved);
}
}
-static void nmi_save_registers(void *dummy)
-{
- int cpu = smp_processor_id();
- struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
- nmi_cpu_save_registers(msrs);
-}
-
-static void free_msrs(void)
-{
- int i;
- for_each_possible_cpu(i) {
- kfree(per_cpu(cpu_msrs, i).counters);
- per_cpu(cpu_msrs, i).counters = NULL;
- kfree(per_cpu(cpu_msrs, i).controls);
- per_cpu(cpu_msrs, i).controls = NULL;
- }
-}
-
-static int allocate_msrs(void)
-{
- int success = 1;
- size_t controls_size = sizeof(struct op_msr) * model->num_controls;
- size_t counters_size = sizeof(struct op_msr) * model->num_counters;
-
- int i;
- for_each_possible_cpu(i) {
- per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
- GFP_KERNEL);
- if (!per_cpu(cpu_msrs, i).counters) {
- success = 0;
- break;
- }
- per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
- GFP_KERNEL);
- if (!per_cpu(cpu_msrs, i).controls) {
- success = 0;
- break;
- }
- }
-
- if (!success)
- free_msrs();
-
- return success;
-}
-
-static void nmi_cpu_setup(void *dummy)
-{
- int cpu = smp_processor_id();
- struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
- spin_lock(&oprofilefs_lock);
- model->setup_ctrs(msrs);
- spin_unlock(&oprofilefs_lock);
- per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
-}
-
-static struct notifier_block profile_exceptions_nb = {
- .notifier_call = profile_exceptions_notify,
- .next = NULL,
- .priority = 2
-};
-
-static int nmi_setup(void)
-{
- int err = 0;
- int cpu;
-
- if (!allocate_msrs())
- return -ENOMEM;
-
- err = register_die_notifier(&profile_exceptions_nb);
- if (err) {
- free_msrs();
- return err;
- }
-
- /* We need to serialize save and setup for HT because the subset
- * of msrs are distinct for save and setup operations
- */
-
- /* Assume saved/restored counters are the same on all CPUs */
- model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
- for_each_possible_cpu(cpu) {
- if (cpu != 0) {
- memcpy(per_cpu(cpu_msrs, cpu).counters,
- per_cpu(cpu_msrs, 0).counters,
- sizeof(struct op_msr) * model->num_counters);
-
- memcpy(per_cpu(cpu_msrs, cpu).controls,
- per_cpu(cpu_msrs, 0).controls,
- sizeof(struct op_msr) * model->num_controls);
- }
-
- }
- on_each_cpu(nmi_save_registers, NULL, 1);
- on_each_cpu(nmi_cpu_setup, NULL, 1);
- nmi_enabled = 1;
- return 0;
-}
-
-static void nmi_restore_registers(struct op_msrs *msrs)
-{
- unsigned int const nr_ctrs = model->num_counters;
- unsigned int const nr_ctrls = model->num_controls;
- struct op_msr *counters = msrs->counters;
- struct op_msr *controls = msrs->controls;
- unsigned int i;
-
- for (i = 0; i < nr_ctrls; ++i) {
- if (controls[i].addr) {
- wrmsr(controls[i].addr,
- controls[i].saved.low,
- controls[i].saved.high);
- }
- }
-
- for (i = 0; i < nr_ctrs; ++i) {
- if (counters[i].addr) {
- wrmsr(counters[i].addr,
- counters[i].saved.low,
- counters[i].saved.high);
- }
- }
-}
-
-static void nmi_cpu_shutdown(void *dummy)
-{
- unsigned int v;
- int cpu = smp_processor_id();
- struct op_msrs *msrs = &__get_cpu_var(cpu_msrs);
-
- /* restoring APIC_LVTPC can trigger an apic error because the delivery
- * mode and vector nr combination can be illegal. That's by design: on
- * power on apic lvt contain a zero vector nr which are legal only for
- * NMI delivery mode. So inhibit apic err before restoring lvtpc
- */
- v = apic_read(APIC_LVTERR);
- apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
- apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
- apic_write(APIC_LVTERR, v);
- nmi_restore_registers(msrs);
-}
-
-static void nmi_shutdown(void)
-{
- struct op_msrs *msrs;
-
- nmi_enabled = 0;
- on_each_cpu(nmi_cpu_shutdown, NULL, 1);
- unregister_die_notifier(&profile_exceptions_nb);
- msrs = &get_cpu_var(cpu_msrs);
- model->shutdown(msrs);
- free_msrs();
- put_cpu_var(cpu_msrs);
-}
-
static void nmi_cpu_start(void *dummy)
{
struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
@@ -255,13 +115,323 @@
on_each_cpu(nmi_cpu_stop, NULL, 1);
}
-struct op_counter_config counter_config[OP_MAX_COUNTER];
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static DEFINE_PER_CPU(int, switch_index);
+
+static inline int has_mux(void)
+{
+ return !!model->switch_ctrl;
+}
+
+inline int op_x86_phys_to_virt(int phys)
+{
+ return __get_cpu_var(switch_index) + phys;
+}
+
+inline int op_x86_virt_to_phys(int virt)
+{
+ return virt % model->num_counters;
+}
+
+static void nmi_shutdown_mux(void)
+{
+ int i;
+
+ if (!has_mux())
+ return;
+
+ for_each_possible_cpu(i) {
+ kfree(per_cpu(cpu_msrs, i).multiplex);
+ per_cpu(cpu_msrs, i).multiplex = NULL;
+ per_cpu(switch_index, i) = 0;
+ }
+}
+
+static int nmi_setup_mux(void)
+{
+ size_t multiplex_size =
+ sizeof(struct op_msr) * model->num_virt_counters;
+ int i;
+
+ if (!has_mux())
+ return 1;
+
+ for_each_possible_cpu(i) {
+ per_cpu(cpu_msrs, i).multiplex =
+ kmalloc(multiplex_size, GFP_KERNEL);
+ if (!per_cpu(cpu_msrs, i).multiplex)
+ return 0;
+ }
+
+ return 1;
+}
+
+static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
+{
+ int i;
+ struct op_msr *multiplex = msrs->multiplex;
+
+ if (!has_mux())
+ return;
+
+ for (i = 0; i < model->num_virt_counters; ++i) {
+ if (counter_config[i].enabled) {
+ multiplex[i].saved = -(u64)counter_config[i].count;
+ } else {
+ multiplex[i].addr = 0;
+ multiplex[i].saved = 0;
+ }
+ }
+
+ per_cpu(switch_index, cpu) = 0;
+}
+
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
+{
+ struct op_msr *multiplex = msrs->multiplex;
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ int virt = op_x86_phys_to_virt(i);
+ if (multiplex[virt].addr)
+ rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
+ }
+}
+
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
+{
+ struct op_msr *multiplex = msrs->multiplex;
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ int virt = op_x86_phys_to_virt(i);
+ if (multiplex[virt].addr)
+ wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
+ }
+}
+
+static void nmi_cpu_switch(void *dummy)
+{
+ int cpu = smp_processor_id();
+ int si = per_cpu(switch_index, cpu);
+ struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+ nmi_cpu_stop(NULL);
+ nmi_cpu_save_mpx_registers(msrs);
+
+ /* move to next set */
+ si += model->num_counters;
+ if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+ per_cpu(switch_index, cpu) = 0;
+ else
+ per_cpu(switch_index, cpu) = si;
+
+ model->switch_ctrl(model, msrs);
+ nmi_cpu_restore_mpx_registers(msrs);
+
+ nmi_cpu_start(NULL);
+}
+
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+ return counter_config[model->num_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+ if (!has_mux())
+ return -ENOSYS; /* not implemented */
+ if (nmi_multiplex_on() < 0)
+ return -EINVAL; /* not necessary */
+
+ on_each_cpu(nmi_cpu_switch, NULL, 1);
+
+ return 0;
+}
+
+static inline void mux_init(struct oprofile_operations *ops)
+{
+ if (has_mux())
+ ops->switch_events = nmi_switch_event;
+}
+
+static void mux_clone(int cpu)
+{
+ if (!has_mux())
+ return;
+
+ memcpy(per_cpu(cpu_msrs, cpu).multiplex,
+ per_cpu(cpu_msrs, 0).multiplex,
+ sizeof(struct op_msr) * model->num_virt_counters);
+}
+
+#else
+
+inline int op_x86_phys_to_virt(int phys) { return phys; }
+inline int op_x86_virt_to_phys(int virt) { return virt; }
+static inline void nmi_shutdown_mux(void) { }
+static inline int nmi_setup_mux(void) { return 1; }
+static inline void
+nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
+static inline void mux_init(struct oprofile_operations *ops) { }
+static void mux_clone(int cpu) { }
+
+#endif
+
+static void free_msrs(void)
+{
+ int i;
+ for_each_possible_cpu(i) {
+ kfree(per_cpu(cpu_msrs, i).counters);
+ per_cpu(cpu_msrs, i).counters = NULL;
+ kfree(per_cpu(cpu_msrs, i).controls);
+ per_cpu(cpu_msrs, i).controls = NULL;
+ }
+}
+
+static int allocate_msrs(void)
+{
+ size_t controls_size = sizeof(struct op_msr) * model->num_controls;
+ size_t counters_size = sizeof(struct op_msr) * model->num_counters;
+
+ int i;
+ for_each_possible_cpu(i) {
+ per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
+ GFP_KERNEL);
+ if (!per_cpu(cpu_msrs, i).counters)
+ return 0;
+ per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
+ GFP_KERNEL);
+ if (!per_cpu(cpu_msrs, i).controls)
+ return 0;
+ }
+
+ return 1;
+}
+
+static void nmi_cpu_setup(void *dummy)
+{
+ int cpu = smp_processor_id();
+ struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+ nmi_cpu_save_registers(msrs);
+ spin_lock(&oprofilefs_lock);
+ model->setup_ctrs(model, msrs);
+ nmi_cpu_setup_mux(cpu, msrs);
+ spin_unlock(&oprofilefs_lock);
+ per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+}
+
+static struct notifier_block profile_exceptions_nb = {
+ .notifier_call = profile_exceptions_notify,
+ .next = NULL,
+ .priority = 2
+};
+
+static int nmi_setup(void)
+{
+ int err = 0;
+ int cpu;
+
+ if (!allocate_msrs())
+ err = -ENOMEM;
+ else if (!nmi_setup_mux())
+ err = -ENOMEM;
+ else
+ err = register_die_notifier(&profile_exceptions_nb);
+
+ if (err) {
+ free_msrs();
+ nmi_shutdown_mux();
+ return err;
+ }
+
+ /* We need to serialize save and setup for HT because the subset
+ * of msrs are distinct for save and setup operations
+ */
+
+ /* Assume saved/restored counters are the same on all CPUs */
+ model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
+ for_each_possible_cpu(cpu) {
+ if (!cpu)
+ continue;
+
+ memcpy(per_cpu(cpu_msrs, cpu).counters,
+ per_cpu(cpu_msrs, 0).counters,
+ sizeof(struct op_msr) * model->num_counters);
+
+ memcpy(per_cpu(cpu_msrs, cpu).controls,
+ per_cpu(cpu_msrs, 0).controls,
+ sizeof(struct op_msr) * model->num_controls);
+
+ mux_clone(cpu);
+ }
+ on_each_cpu(nmi_cpu_setup, NULL, 1);
+ nmi_enabled = 1;
+ return 0;
+}
+
+static void nmi_cpu_restore_registers(struct op_msrs *msrs)
+{
+ struct op_msr *counters = msrs->counters;
+ struct op_msr *controls = msrs->controls;
+ unsigned int i;
+
+ for (i = 0; i < model->num_controls; ++i) {
+ if (controls[i].addr)
+ wrmsrl(controls[i].addr, controls[i].saved);
+ }
+
+ for (i = 0; i < model->num_counters; ++i) {
+ if (counters[i].addr)
+ wrmsrl(counters[i].addr, counters[i].saved);
+ }
+}
+
+static void nmi_cpu_shutdown(void *dummy)
+{
+ unsigned int v;
+ int cpu = smp_processor_id();
+ struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+ /* restoring APIC_LVTPC can trigger an apic error because the delivery
+ * mode and vector nr combination can be illegal. That's by design: on
+ * power on apic lvt contain a zero vector nr which are legal only for
+ * NMI delivery mode. So inhibit apic err before restoring lvtpc
+ */
+ v = apic_read(APIC_LVTERR);
+ apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
+ apic_write(APIC_LVTERR, v);
+ nmi_cpu_restore_registers(msrs);
+}
+
+static void nmi_shutdown(void)
+{
+ struct op_msrs *msrs;
+
+ nmi_enabled = 0;
+ on_each_cpu(nmi_cpu_shutdown, NULL, 1);
+ unregister_die_notifier(&profile_exceptions_nb);
+ nmi_shutdown_mux();
+ msrs = &get_cpu_var(cpu_msrs);
+ model->shutdown(msrs);
+ free_msrs();
+ put_cpu_var(cpu_msrs);
+}
static int nmi_create_files(struct super_block *sb, struct dentry *root)
{
unsigned int i;
- for (i = 0; i < model->num_counters; ++i) {
+ for (i = 0; i < model->num_virt_counters; ++i) {
struct dentry *dir;
char buf[4];
@@ -270,7 +440,7 @@
* NOTE: assumes 1:1 mapping here (that counters are organized
* sequentially in their struct assignment).
*/
- if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i)))
+ if (!avail_to_resrv_perfctr_nmi_bit(op_x86_virt_to_phys(i)))
continue;
snprintf(buf, sizeof(buf), "%d", i);
@@ -402,6 +572,7 @@
static int __init ppro_init(char **cpu_type)
{
__u8 cpu_model = boot_cpu_data.x86_model;
+ struct op_x86_model_spec *spec = &op_ppro_spec; /* default */
if (force_arch_perfmon && cpu_has_arch_perfmon)
return 0;
@@ -428,7 +599,7 @@
*cpu_type = "i386/core_2";
break;
case 26:
- arch_perfmon_setup_counters();
+ spec = &op_arch_perfmon_spec;
*cpu_type = "i386/core_i7";
break;
case 28:
@@ -439,17 +610,7 @@
return 0;
}
- model = &op_ppro_spec;
- return 1;
-}
-
-static int __init arch_perfmon_init(char **cpu_type)
-{
- if (!cpu_has_arch_perfmon)
- return 0;
- *cpu_type = "i386/arch_perfmon";
- model = &op_arch_perfmon_spec;
- arch_perfmon_setup_counters();
+ model = spec;
return 1;
}
@@ -471,27 +632,26 @@
/* Needs to be at least an Athlon (or hammer in 32bit mode) */
switch (family) {
- default:
- return -ENODEV;
case 6:
- model = &op_amd_spec;
cpu_type = "i386/athlon";
break;
case 0xf:
- model = &op_amd_spec;
- /* Actually it could be i386/hammer too, but give
- user space an consistent name. */
+ /*
+ * Actually it could be i386/hammer too, but
+ * give user space an consistent name.
+ */
cpu_type = "x86-64/hammer";
break;
case 0x10:
- model = &op_amd_spec;
cpu_type = "x86-64/family10";
break;
case 0x11:
- model = &op_amd_spec;
cpu_type = "x86-64/family11h";
break;
+ default:
+ return -ENODEV;
}
+ model = &op_amd_spec;
break;
case X86_VENDOR_INTEL:
@@ -510,8 +670,15 @@
break;
}
- if (!cpu_type && !arch_perfmon_init(&cpu_type))
+ if (cpu_type)
+ break;
+
+ if (!cpu_has_arch_perfmon)
return -ENODEV;
+
+ /* use arch perfmon as fallback */
+ cpu_type = "i386/arch_perfmon";
+ model = &op_arch_perfmon_spec;
break;
default:
@@ -522,18 +689,23 @@
register_cpu_notifier(&oprofile_cpu_nb);
#endif
/* default values, can be overwritten by model */
- ops->create_files = nmi_create_files;
- ops->setup = nmi_setup;
- ops->shutdown = nmi_shutdown;
- ops->start = nmi_start;
- ops->stop = nmi_stop;
- ops->cpu_type = cpu_type;
+ ops->create_files = nmi_create_files;
+ ops->setup = nmi_setup;
+ ops->shutdown = nmi_shutdown;
+ ops->start = nmi_start;
+ ops->stop = nmi_stop;
+ ops->cpu_type = cpu_type;
if (model->init)
ret = model->init(ops);
if (ret)
return ret;
+ if (!model->num_virt_counters)
+ model->num_virt_counters = model->num_counters;
+
+ mux_init(ops);
+
init_sysfs();
using_nmi = 1;
printk(KERN_INFO "oprofile: using NMI interrupt.\n");
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 91b6a11..e28398d 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -10,7 +10,7 @@
#ifndef OP_COUNTER_H
#define OP_COUNTER_H
-#define OP_MAX_COUNTER 8
+#define OP_MAX_COUNTER 32
/* Per-perfctr configuration as set via
* oprofilefs.
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 8fdf06e..39686c2 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -9,12 +9,15 @@
* @author Philippe Elie
* @author Graydon Hoare
* @author Robert Richter <robert.richter@amd.com>
- * @author Barry Kasindorf
+ * @author Barry Kasindorf <barry.kasindorf@amd.com>
+ * @author Jason Yeh <jason.yeh@amd.com>
+ * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
*/
#include <linux/oprofile.h>
#include <linux/device.h>
#include <linux/pci.h>
+#include <linux/percpu.h>
#include <asm/ptrace.h>
#include <asm/msr.h>
@@ -25,43 +28,36 @@
#define NUM_COUNTERS 4
#define NUM_CONTROLS 4
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+#define NUM_VIRT_COUNTERS 32
+#define NUM_VIRT_CONTROLS 32
+#else
+#define NUM_VIRT_COUNTERS NUM_COUNTERS
+#define NUM_VIRT_CONTROLS NUM_CONTROLS
+#endif
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+#define OP_EVENT_MASK 0x0FFF
+#define OP_CTR_OVERFLOW (1ULL<<31)
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR_LO(x) (x &= (1<<21))
-#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
-#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
-#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
-#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
+#define MSR_AMD_EVENTSEL_RESERVED ((0xFFFFFCF0ULL<<32)|(1ULL<<21))
-static unsigned long reset_value[NUM_COUNTERS];
+static unsigned long reset_value[NUM_VIRT_COUNTERS];
#ifdef CONFIG_OPROFILE_IBS
/* IbsFetchCtl bits/masks */
-#define IBS_FETCH_HIGH_VALID_BIT (1UL << 17) /* bit 49 */
-#define IBS_FETCH_HIGH_ENABLE (1UL << 16) /* bit 48 */
-#define IBS_FETCH_LOW_MAX_CNT_MASK 0x0000FFFFUL /* MaxCnt mask */
+#define IBS_FETCH_RAND_EN (1ULL<<57)
+#define IBS_FETCH_VAL (1ULL<<49)
+#define IBS_FETCH_ENABLE (1ULL<<48)
+#define IBS_FETCH_CNT_MASK 0xFFFF0000ULL
/*IbsOpCtl bits */
-#define IBS_OP_LOW_VALID_BIT (1ULL<<18) /* bit 18 */
-#define IBS_OP_LOW_ENABLE (1ULL<<17) /* bit 17 */
+#define IBS_OP_CNT_CTL (1ULL<<19)
+#define IBS_OP_VAL (1ULL<<18)
+#define IBS_OP_ENABLE (1ULL<<17)
-#define IBS_FETCH_SIZE 6
-#define IBS_OP_SIZE 12
+#define IBS_FETCH_SIZE 6
+#define IBS_OP_SIZE 12
static int has_ibs; /* AMD Family10h and later */
@@ -78,6 +74,45 @@
#endif
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
+{
+ int i;
+
+ for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
+ int hw_counter = op_x86_virt_to_phys(i);
+ if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+ msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
+ else
+ msrs->multiplex[i].addr = 0;
+ }
+}
+
+static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
+ struct op_msrs const * const msrs)
+{
+ u64 val;
+ int i;
+
+ /* enable active counters */
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ int virt = op_x86_phys_to_virt(i);
+ if (!counter_config[virt].enabled)
+ continue;
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ val |= op_x86_get_ctrl(model, &counter_config[virt]);
+ wrmsrl(msrs->controls[i].addr, val);
+ }
+}
+
+#else
+
+static inline void op_mux_fill_in_addresses(struct op_msrs * const msrs) { }
+
+#endif
+
/* functions for op_amd_spec */
static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
@@ -97,150 +132,174 @@
else
msrs->controls[i].addr = 0;
}
+
+ op_mux_fill_in_addresses(msrs);
}
-
-static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
+static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
+ struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
+ /* setup reset_value */
+ for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
+ if (counter_config[i].enabled)
+ reset_value[i] = counter_config[i].count;
+ else
+ reset_value[i] = 0;
+ }
+
/* clear all counters */
- for (i = 0 ; i < NUM_CONTROLS; ++i) {
- if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+ for (i = 0; i < NUM_CONTROLS; ++i) {
+ if (unlikely(!msrs->controls[i].addr))
continue;
- CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR_LO(low);
- CTRL_CLEAR_HI(high);
- CTRL_WRITE(low, high, msrs, i);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ wrmsrl(msrs->controls[i].addr, val);
}
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+ if (unlikely(!msrs->counters[i].addr))
continue;
- CTR_WRITE(1, msrs, i);
+ wrmsrl(msrs->counters[i].addr, -1LL);
}
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
- reset_value[i] = counter_config[i].count;
+ int virt = op_x86_phys_to_virt(i);
+ if (!counter_config[virt].enabled)
+ continue;
+ if (!msrs->counters[i].addr)
+ continue;
- CTR_WRITE(counter_config[i].count, msrs, i);
+ /* setup counter registers */
+ wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
- CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR_LO(low);
- CTRL_CLEAR_HI(high);
- CTRL_SET_ENABLE(low);
- CTRL_SET_USR(low, counter_config[i].user);
- CTRL_SET_KERN(low, counter_config[i].kernel);
- CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT_LOW(low, counter_config[i].event);
- CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
- CTRL_SET_HOST_ONLY(high, 0);
- CTRL_SET_GUEST_ONLY(high, 0);
-
- CTRL_WRITE(low, high, msrs, i);
- } else {
- reset_value[i] = 0;
- }
+ /* setup control registers */
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ val |= op_x86_get_ctrl(model, &counter_config[virt]);
+ wrmsrl(msrs->controls[i].addr, val);
}
}
#ifdef CONFIG_OPROFILE_IBS
-static inline int
+static inline void
op_amd_handle_ibs(struct pt_regs * const regs,
struct op_msrs const * const msrs)
{
- u32 low, high;
- u64 msr;
+ u64 val, ctl;
struct op_entry entry;
if (!has_ibs)
- return 1;
+ return;
if (ibs_config.fetch_enabled) {
- rdmsr(MSR_AMD64_IBSFETCHCTL, low, high);
- if (high & IBS_FETCH_HIGH_VALID_BIT) {
- rdmsrl(MSR_AMD64_IBSFETCHLINAD, msr);
- oprofile_write_reserve(&entry, regs, msr,
+ rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
+ if (ctl & IBS_FETCH_VAL) {
+ rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
+ oprofile_write_reserve(&entry, regs, val,
IBS_FETCH_CODE, IBS_FETCH_SIZE);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
- oprofile_add_data(&entry, low);
- oprofile_add_data(&entry, high);
- rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, msr);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
+ oprofile_add_data64(&entry, val);
+ oprofile_add_data64(&entry, ctl);
+ rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
+ oprofile_add_data64(&entry, val);
oprofile_write_commit(&entry);
/* reenable the IRQ */
- high &= ~IBS_FETCH_HIGH_VALID_BIT;
- high |= IBS_FETCH_HIGH_ENABLE;
- low &= IBS_FETCH_LOW_MAX_CNT_MASK;
- wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+ ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT_MASK);
+ ctl |= IBS_FETCH_ENABLE;
+ wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
}
}
if (ibs_config.op_enabled) {
- rdmsr(MSR_AMD64_IBSOPCTL, low, high);
- if (low & IBS_OP_LOW_VALID_BIT) {
- rdmsrl(MSR_AMD64_IBSOPRIP, msr);
- oprofile_write_reserve(&entry, regs, msr,
+ rdmsrl(MSR_AMD64_IBSOPCTL, ctl);
+ if (ctl & IBS_OP_VAL) {
+ rdmsrl(MSR_AMD64_IBSOPRIP, val);
+ oprofile_write_reserve(&entry, regs, val,
IBS_OP_CODE, IBS_OP_SIZE);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
- rdmsrl(MSR_AMD64_IBSOPDATA, msr);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
- rdmsrl(MSR_AMD64_IBSOPDATA2, msr);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
- rdmsrl(MSR_AMD64_IBSOPDATA3, msr);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
- rdmsrl(MSR_AMD64_IBSDCLINAD, msr);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
- rdmsrl(MSR_AMD64_IBSDCPHYSAD, msr);
- oprofile_add_data(&entry, (u32)msr);
- oprofile_add_data(&entry, (u32)(msr >> 32));
+ oprofile_add_data64(&entry, val);
+ rdmsrl(MSR_AMD64_IBSOPDATA, val);
+ oprofile_add_data64(&entry, val);
+ rdmsrl(MSR_AMD64_IBSOPDATA2, val);
+ oprofile_add_data64(&entry, val);
+ rdmsrl(MSR_AMD64_IBSOPDATA3, val);
+ oprofile_add_data64(&entry, val);
+ rdmsrl(MSR_AMD64_IBSDCLINAD, val);
+ oprofile_add_data64(&entry, val);
+ rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
+ oprofile_add_data64(&entry, val);
oprofile_write_commit(&entry);
/* reenable the IRQ */
- high = 0;
- low &= ~IBS_OP_LOW_VALID_BIT;
- low |= IBS_OP_LOW_ENABLE;
- wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+ ctl &= ~IBS_OP_VAL & 0xFFFFFFFF;
+ ctl |= IBS_OP_ENABLE;
+ wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
}
}
-
- return 1;
}
+static inline void op_amd_start_ibs(void)
+{
+ u64 val;
+ if (has_ibs && ibs_config.fetch_enabled) {
+ val = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+ val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
+ val |= IBS_FETCH_ENABLE;
+ wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
+ }
+
+ if (has_ibs && ibs_config.op_enabled) {
+ val = (ibs_config.max_cnt_op >> 4) & 0xFFFF;
+ val |= ibs_config.dispatched_ops ? IBS_OP_CNT_CTL : 0;
+ val |= IBS_OP_ENABLE;
+ wrmsrl(MSR_AMD64_IBSOPCTL, val);
+ }
+}
+
+static void op_amd_stop_ibs(void)
+{
+ if (has_ibs && ibs_config.fetch_enabled)
+ /* clear max count and enable */
+ wrmsrl(MSR_AMD64_IBSFETCHCTL, 0);
+
+ if (has_ibs && ibs_config.op_enabled)
+ /* clear max count and enable */
+ wrmsrl(MSR_AMD64_IBSOPCTL, 0);
+}
+
+#else
+
+static inline void op_amd_handle_ibs(struct pt_regs * const regs,
+ struct op_msrs const * const msrs) { }
+static inline void op_amd_start_ibs(void) { }
+static inline void op_amd_stop_ibs(void) { }
+
#endif
static int op_amd_check_ctrs(struct pt_regs * const regs,
struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
- for (i = 0 ; i < NUM_COUNTERS; ++i) {
- if (!reset_value[i])
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ int virt = op_x86_phys_to_virt(i);
+ if (!reset_value[virt])
continue;
- CTR_READ(low, high, msrs, i);
- if (CTR_OVERFLOWED(low)) {
- oprofile_add_sample(regs, i);
- CTR_WRITE(reset_value[i], msrs, i);
- }
+ rdmsrl(msrs->counters[i].addr, val);
+ /* bit is clear if overflowed: */
+ if (val & OP_CTR_OVERFLOW)
+ continue;
+ oprofile_add_sample(regs, virt);
+ wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
}
-#ifdef CONFIG_OPROFILE_IBS
op_amd_handle_ibs(regs, msrs);
-#endif
/* See op_model_ppro.c */
return 1;
@@ -248,79 +307,50 @@
static void op_amd_start(struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (reset_value[i]) {
- CTRL_READ(low, high, msrs, i);
- CTRL_SET_ACTIVE(low);
- CTRL_WRITE(low, high, msrs, i);
- }
+
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (!reset_value[op_x86_phys_to_virt(i)])
+ continue;
+ rdmsrl(msrs->controls[i].addr, val);
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(msrs->controls[i].addr, val);
}
-#ifdef CONFIG_OPROFILE_IBS
- if (has_ibs && ibs_config.fetch_enabled) {
- low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
- high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
- + IBS_FETCH_HIGH_ENABLE;
- wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
- }
-
- if (has_ibs && ibs_config.op_enabled) {
- low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
- + ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
- + IBS_OP_LOW_ENABLE;
- high = 0;
- wrmsr(MSR_AMD64_IBSOPCTL, low, high);
- }
-#endif
+ op_amd_start_ibs();
}
-
static void op_amd_stop(struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
/*
* Subtle: stop on all counters to avoid race with setting our
* pm callback
*/
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (!reset_value[i])
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (!reset_value[op_x86_phys_to_virt(i)])
continue;
- CTRL_READ(low, high, msrs, i);
- CTRL_SET_INACTIVE(low);
- CTRL_WRITE(low, high, msrs, i);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(msrs->controls[i].addr, val);
}
-#ifdef CONFIG_OPROFILE_IBS
- if (has_ibs && ibs_config.fetch_enabled) {
- /* clear max count and enable */
- low = 0;
- high = 0;
- wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
- }
-
- if (has_ibs && ibs_config.op_enabled) {
- /* clear max count and enable */
- low = 0;
- high = 0;
- wrmsr(MSR_AMD64_IBSOPCTL, low, high);
- }
-#endif
+ op_amd_stop_ibs();
}
static void op_amd_shutdown(struct op_msrs const * const msrs)
{
int i;
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (CTR_IS_RESERVED(msrs, i))
+ for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (msrs->counters[i].addr)
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
}
- for (i = 0 ; i < NUM_CONTROLS ; ++i) {
- if (CTRL_IS_RESERVED(msrs, i))
+ for (i = 0; i < NUM_CONTROLS; ++i) {
+ if (msrs->controls[i].addr)
release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
}
@@ -490,15 +520,21 @@
#endif /* CONFIG_OPROFILE_IBS */
-struct op_x86_model_spec const op_amd_spec = {
- .init = op_amd_init,
- .exit = op_amd_exit,
+struct op_x86_model_spec op_amd_spec = {
.num_counters = NUM_COUNTERS,
.num_controls = NUM_CONTROLS,
+ .num_virt_counters = NUM_VIRT_COUNTERS,
+ .reserved = MSR_AMD_EVENTSEL_RESERVED,
+ .event_mask = OP_EVENT_MASK,
+ .init = op_amd_init,
+ .exit = op_amd_exit,
.fill_in_addresses = &op_amd_fill_in_addresses,
.setup_ctrs = &op_amd_setup_ctrs,
.check_ctrs = &op_amd_check_ctrs,
.start = &op_amd_start,
.stop = &op_amd_stop,
- .shutdown = &op_amd_shutdown
+ .shutdown = &op_amd_shutdown,
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+ .switch_ctrl = &op_mux_switch_ctrl,
+#endif
};
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 819b131..ac6b354 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -32,6 +32,8 @@
#define NUM_CCCRS_HT2 9
#define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
+#define OP_CTR_OVERFLOW (1ULL<<31)
+
static unsigned int num_counters = NUM_COUNTERS_NON_HT;
static unsigned int num_controls = NUM_CONTROLS_NON_HT;
@@ -350,8 +352,6 @@
#define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
#define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
#define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-#define ESCR_READ(escr, high, ev, i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
-#define ESCR_WRITE(escr, high, ev, i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
#define CCCR_RESERVED_BITS 0x38030FFF
#define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
@@ -361,17 +361,9 @@
#define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
#define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
#define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
-#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
#define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
#define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
-#define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
-#define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
-
/* this assigns a "stagger" to the current CPU, which is used throughout
the code in this module as an extra array offset, to select the "even"
@@ -515,7 +507,7 @@
if (ev->bindings[i].virt_counter & counter_bit) {
/* modify ESCR */
- ESCR_READ(escr, high, ev, i);
+ rdmsr(ev->bindings[i].escr_address, escr, high);
ESCR_CLEAR(escr);
if (stag == 0) {
ESCR_SET_USR_0(escr, counter_config[ctr].user);
@@ -526,10 +518,11 @@
}
ESCR_SET_EVENT_SELECT(escr, ev->event_select);
ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
- ESCR_WRITE(escr, high, ev, i);
+ wrmsr(ev->bindings[i].escr_address, escr, high);
/* modify CCCR */
- CCCR_READ(cccr, high, VIRT_CTR(stag, ctr));
+ rdmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
+ cccr, high);
CCCR_CLEAR(cccr);
CCCR_SET_REQUIRED_BITS(cccr);
CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
@@ -537,7 +530,8 @@
CCCR_SET_PMI_OVF_0(cccr);
else
CCCR_SET_PMI_OVF_1(cccr);
- CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr));
+ wrmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
+ cccr, high);
return;
}
}
@@ -548,7 +542,8 @@
}
-static void p4_setup_ctrs(struct op_msrs const * const msrs)
+static void p4_setup_ctrs(struct op_x86_model_spec const *model,
+ struct op_msrs const * const msrs)
{
unsigned int i;
unsigned int low, high;
@@ -563,8 +558,8 @@
}
/* clear the cccrs we will use */
- for (i = 0 ; i < num_counters ; i++) {
- if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+ for (i = 0; i < num_counters; i++) {
+ if (unlikely(!msrs->controls[i].addr))
continue;
rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
CCCR_CLEAR(low);
@@ -574,17 +569,18 @@
/* clear all escrs (including those outside our concern) */
for (i = num_counters; i < num_controls; i++) {
- if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+ if (unlikely(!msrs->controls[i].addr))
continue;
wrmsr(msrs->controls[i].addr, 0, 0);
}
/* setup all counters */
- for (i = 0 ; i < num_counters ; ++i) {
- if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
+ for (i = 0; i < num_counters; ++i) {
+ if (counter_config[i].enabled && msrs->controls[i].addr) {
reset_value[i] = counter_config[i].count;
pmc_setup_one_p4_counter(i);
- CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
+ wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
+ -(u64)counter_config[i].count);
} else {
reset_value[i] = 0;
}
@@ -624,14 +620,16 @@
real = VIRT_CTR(stag, i);
- CCCR_READ(low, high, real);
- CTR_READ(ctr, high, real);
- if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
+ rdmsr(p4_counters[real].cccr_address, low, high);
+ rdmsr(p4_counters[real].counter_address, ctr, high);
+ if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
oprofile_add_sample(regs, i);
- CTR_WRITE(reset_value[i], real);
+ wrmsrl(p4_counters[real].counter_address,
+ -(u64)reset_value[i]);
CCCR_CLEAR_OVF(low);
- CCCR_WRITE(low, high, real);
- CTR_WRITE(reset_value[i], real);
+ wrmsr(p4_counters[real].cccr_address, low, high);
+ wrmsrl(p4_counters[real].counter_address,
+ -(u64)reset_value[i]);
}
}
@@ -653,9 +651,9 @@
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
- CCCR_READ(low, high, VIRT_CTR(stag, i));
+ rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
CCCR_SET_ENABLE(low);
- CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+ wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
}
}
@@ -670,9 +668,9 @@
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
- CCCR_READ(low, high, VIRT_CTR(stag, i));
+ rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
CCCR_SET_DISABLE(low);
- CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+ wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
}
}
@@ -680,8 +678,8 @@
{
int i;
- for (i = 0 ; i < num_counters ; ++i) {
- if (CTR_IS_RESERVED(msrs, i))
+ for (i = 0; i < num_counters; ++i) {
+ if (msrs->counters[i].addr)
release_perfctr_nmi(msrs->counters[i].addr);
}
/*
@@ -689,15 +687,15 @@
* conjunction with the counter registers (hence the starting offset).
* This saves a few bits.
*/
- for (i = num_counters ; i < num_controls ; ++i) {
- if (CTRL_IS_RESERVED(msrs, i))
+ for (i = num_counters; i < num_controls; ++i) {
+ if (msrs->controls[i].addr)
release_evntsel_nmi(msrs->controls[i].addr);
}
}
#ifdef CONFIG_SMP
-struct op_x86_model_spec const op_p4_ht2_spec = {
+struct op_x86_model_spec op_p4_ht2_spec = {
.num_counters = NUM_COUNTERS_HT2,
.num_controls = NUM_CONTROLS_HT2,
.fill_in_addresses = &p4_fill_in_addresses,
@@ -709,7 +707,7 @@
};
#endif
-struct op_x86_model_spec const op_p4_spec = {
+struct op_x86_model_spec op_p4_spec = {
.num_counters = NUM_COUNTERS_NON_HT,
.num_controls = NUM_CONTROLS_NON_HT,
.fill_in_addresses = &p4_fill_in_addresses,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 4da7230..4899215 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -10,6 +10,7 @@
* @author Philippe Elie
* @author Graydon Hoare
* @author Andi Kleen
+ * @author Robert Richter <robert.richter@amd.com>
*/
#include <linux/oprofile.h>
@@ -18,7 +19,6 @@
#include <asm/msr.h>
#include <asm/apic.h>
#include <asm/nmi.h>
-#include <asm/perf_counter.h>
#include "op_x86_model.h"
#include "op_counter.h"
@@ -26,20 +26,7 @@
static int num_counters = 2;
static int counter_width = 32;
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+#define MSR_PPRO_EVENTSEL_RESERVED ((0xFFFFFFFFULL<<32)|(1ULL<<21))
static u64 *reset_value;
@@ -63,9 +50,10 @@
}
-static void ppro_setup_ctrs(struct op_msrs const * const msrs)
+static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
+ struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
if (!reset_value) {
@@ -93,36 +81,30 @@
}
/* clear all counters */
- for (i = 0 ; i < num_counters; ++i) {
- if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+ for (i = 0; i < num_counters; ++i) {
+ if (unlikely(!msrs->controls[i].addr))
continue;
- CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
- CTRL_WRITE(low, high, msrs, i);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ wrmsrl(msrs->controls[i].addr, val);
}
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < num_counters; ++i) {
- if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+ if (unlikely(!msrs->counters[i].addr))
continue;
wrmsrl(msrs->counters[i].addr, -1LL);
}
/* enable active counters */
for (i = 0; i < num_counters; ++i) {
- if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+ if (counter_config[i].enabled && msrs->counters[i].addr) {
reset_value[i] = counter_config[i].count;
-
wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-
- CTRL_READ(low, high, msrs, i);
- CTRL_CLEAR(low);
- CTRL_SET_ENABLE(low);
- CTRL_SET_USR(low, counter_config[i].user);
- CTRL_SET_KERN(low, counter_config[i].kernel);
- CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT(low, counter_config[i].event);
- CTRL_WRITE(low, high, msrs, i);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= model->reserved;
+ val |= op_x86_get_ctrl(model, &counter_config[i]);
+ wrmsrl(msrs->controls[i].addr, val);
} else {
reset_value[i] = 0;
}
@@ -143,14 +125,14 @@
if (unlikely(!reset_value))
goto out;
- for (i = 0 ; i < num_counters; ++i) {
+ for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
rdmsrl(msrs->counters[i].addr, val);
- if (CTR_OVERFLOWED(val)) {
- oprofile_add_sample(regs, i);
- wrmsrl(msrs->counters[i].addr, -reset_value[i]);
- }
+ if (val & (1ULL << (counter_width - 1)))
+ continue;
+ oprofile_add_sample(regs, i);
+ wrmsrl(msrs->counters[i].addr, -reset_value[i]);
}
out:
@@ -171,16 +153,16 @@
static void ppro_start(struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
if (!reset_value)
return;
for (i = 0; i < num_counters; ++i) {
if (reset_value[i]) {
- CTRL_READ(low, high, msrs, i);
- CTRL_SET_ACTIVE(low);
- CTRL_WRITE(low, high, msrs, i);
+ rdmsrl(msrs->controls[i].addr, val);
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(msrs->controls[i].addr, val);
}
}
}
@@ -188,7 +170,7 @@
static void ppro_stop(struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
if (!reset_value)
@@ -196,9 +178,9 @@
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
- CTRL_READ(low, high, msrs, i);
- CTRL_SET_INACTIVE(low);
- CTRL_WRITE(low, high, msrs, i);
+ rdmsrl(msrs->controls[i].addr, val);
+ val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(msrs->controls[i].addr, val);
}
}
@@ -206,12 +188,12 @@
{
int i;
- for (i = 0 ; i < num_counters ; ++i) {
- if (CTR_IS_RESERVED(msrs, i))
+ for (i = 0; i < num_counters; ++i) {
+ if (msrs->counters[i].addr)
release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
}
- for (i = 0 ; i < num_counters ; ++i) {
- if (CTRL_IS_RESERVED(msrs, i))
+ for (i = 0; i < num_counters; ++i) {
+ if (msrs->controls[i].addr)
release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
}
if (reset_value) {
@@ -222,8 +204,9 @@
struct op_x86_model_spec op_ppro_spec = {
- .num_counters = 2, /* can be overriden */
- .num_controls = 2, /* dito */
+ .num_counters = 2,
+ .num_controls = 2,
+ .reserved = MSR_PPRO_EVENTSEL_RESERVED,
.fill_in_addresses = &ppro_fill_in_addresses,
.setup_ctrs = &ppro_setup_ctrs,
.check_ctrs = &ppro_check_ctrs,
@@ -241,7 +224,7 @@
* the specific CPU.
*/
-void arch_perfmon_setup_counters(void)
+static void arch_perfmon_setup_counters(void)
{
union cpuid10_eax eax;
@@ -259,11 +242,17 @@
op_arch_perfmon_spec.num_counters = num_counters;
op_arch_perfmon_spec.num_controls = num_counters;
- op_ppro_spec.num_counters = num_counters;
- op_ppro_spec.num_controls = num_counters;
+}
+
+static int arch_perfmon_init(struct oprofile_operations *ignore)
+{
+ arch_perfmon_setup_counters();
+ return 0;
}
struct op_x86_model_spec op_arch_perfmon_spec = {
+ .reserved = MSR_PPRO_EVENTSEL_RESERVED,
+ .init = &arch_perfmon_init,
/* num_counters/num_controls filled in at runtime */
.fill_in_addresses = &ppro_fill_in_addresses,
/* user space does the cpuid check for available events */
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 825e790..b837761 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -6,51 +6,66 @@
* @remark Read the file COPYING
*
* @author Graydon Hoare
+ * @author Robert Richter <robert.richter@amd.com>
*/
#ifndef OP_X86_MODEL_H
#define OP_X86_MODEL_H
-struct op_saved_msr {
- unsigned int high;
- unsigned int low;
-};
+#include <asm/types.h>
+#include <asm/perf_counter.h>
struct op_msr {
- unsigned long addr;
- struct op_saved_msr saved;
+ unsigned long addr;
+ u64 saved;
};
struct op_msrs {
struct op_msr *counters;
struct op_msr *controls;
+ struct op_msr *multiplex;
};
struct pt_regs;
+struct oprofile_operations;
+
/* The model vtable abstracts the differences between
* various x86 CPU models' perfctr support.
*/
struct op_x86_model_spec {
- int (*init)(struct oprofile_operations *ops);
- void (*exit)(void);
- unsigned int num_counters;
- unsigned int num_controls;
- void (*fill_in_addresses)(struct op_msrs * const msrs);
- void (*setup_ctrs)(struct op_msrs const * const msrs);
- int (*check_ctrs)(struct pt_regs * const regs,
- struct op_msrs const * const msrs);
- void (*start)(struct op_msrs const * const msrs);
- void (*stop)(struct op_msrs const * const msrs);
- void (*shutdown)(struct op_msrs const * const msrs);
+ unsigned int num_counters;
+ unsigned int num_controls;
+ unsigned int num_virt_counters;
+ u64 reserved;
+ u16 event_mask;
+ int (*init)(struct oprofile_operations *ops);
+ void (*exit)(void);
+ void (*fill_in_addresses)(struct op_msrs * const msrs);
+ void (*setup_ctrs)(struct op_x86_model_spec const *model,
+ struct op_msrs const * const msrs);
+ int (*check_ctrs)(struct pt_regs * const regs,
+ struct op_msrs const * const msrs);
+ void (*start)(struct op_msrs const * const msrs);
+ void (*stop)(struct op_msrs const * const msrs);
+ void (*shutdown)(struct op_msrs const * const msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+ void (*switch_ctrl)(struct op_x86_model_spec const *model,
+ struct op_msrs const * const msrs);
+#endif
};
-extern struct op_x86_model_spec op_ppro_spec;
-extern struct op_x86_model_spec const op_p4_spec;
-extern struct op_x86_model_spec const op_p4_ht2_spec;
-extern struct op_x86_model_spec const op_amd_spec;
-extern struct op_x86_model_spec op_arch_perfmon_spec;
+struct op_counter_config;
-extern void arch_perfmon_setup_counters(void);
+extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+ struct op_counter_config *counter_config);
+extern int op_x86_phys_to_virt(int phys);
+extern int op_x86_virt_to_phys(int virt);
+
+extern struct op_x86_model_spec op_ppro_spec;
+extern struct op_x86_model_spec op_p4_spec;
+extern struct op_x86_model_spec op_p4_ht2_spec;
+extern struct op_x86_model_spec op_amd_spec;
+extern struct op_x86_model_spec op_arch_perfmon_spec;
#endif /* OP_X86_MODEL_H */
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index bd13c3e..347d882 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -192,13 +192,14 @@
static int __init pci_sanity_check(struct pci_raw_ops *o)
{
u32 x = 0;
- int devfn;
+ int year, devfn;
if (pci_probe & PCI_NO_CHECKS)
return 1;
/* Assume Type 1 works for newer systems.
This handles machines that don't have anything on PCI Bus 0. */
- if (dmi_get_year(DMI_BIOS_DATE) >= 2001)
+ dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL);
+ if (year >= 2001)
return 1;
for (devfn = 0; devfn < 0x100; devfn++) {
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 172438f..3bb4fc2 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -5,6 +5,11 @@
CFLAGS_REMOVE_irq.o = -pg
endif
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o := $(nostackp)
+CFLAGS_mmu.o := $(nostackp)
+
obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
@@ -12,3 +17,4 @@
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
+
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0a1700a..0dd0c2c 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -51,6 +51,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/reboot.h>
+#include <asm/stackprotector.h>
#include "xen-ops.h"
#include "mmu.h"
@@ -215,6 +216,7 @@
(1 << X86_FEATURE_ACPI)); /* disable ACPI */
ax = 1;
+ cx = 0;
xen_cpuid(&ax, &bx, &cx, &dx);
/* cpuid claims we support xsave; try enabling it to see what happens */
@@ -329,18 +331,28 @@
unsigned long frames[pages];
int f;
- /* A GDT can be up to 64k in size, which corresponds to 8192
- 8-byte entries, or 16 4k pages.. */
+ /*
+ * A GDT can be up to 64k in size, which corresponds to 8192
+ * 8-byte entries, or 16 4k pages..
+ */
BUG_ON(size > 65536);
BUG_ON(va & ~PAGE_MASK);
for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
int level;
- pte_t *ptep = lookup_address(va, &level);
+ pte_t *ptep;
unsigned long pfn, mfn;
void *virt;
+ /*
+ * The GDT is per-cpu and is in the percpu data area.
+ * That can be virtually mapped, so we need to do a
+ * page-walk to get the underlying MFN for the
+ * hypercall. The page can also be in the kernel's
+ * linear range, so we need to RO that mapping too.
+ */
+ ptep = lookup_address(va, &level);
BUG_ON(ptep == NULL);
pfn = pte_pfn(*ptep);
@@ -357,6 +369,44 @@
BUG();
}
+/*
+ * load_gdt for early boot, when the gdt is only mapped once
+ */
+static __init void xen_load_gdt_boot(const struct desc_ptr *dtr)
+{
+ unsigned long va = dtr->address;
+ unsigned int size = dtr->size + 1;
+ unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ unsigned long frames[pages];
+ int f;
+
+ /*
+ * A GDT can be up to 64k in size, which corresponds to 8192
+ * 8-byte entries, or 16 4k pages..
+ */
+
+ BUG_ON(size > 65536);
+ BUG_ON(va & ~PAGE_MASK);
+
+ for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
+ pte_t pte;
+ unsigned long pfn, mfn;
+
+ pfn = virt_to_pfn(va);
+ mfn = pfn_to_mfn(pfn);
+
+ pte = pfn_pte(pfn, PAGE_KERNEL_RO);
+
+ if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
+ BUG();
+
+ frames[f] = mfn;
+ }
+
+ if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+ BUG();
+}
+
static void load_TLS_descriptor(struct thread_struct *t,
unsigned int cpu, unsigned int i)
{
@@ -580,6 +630,29 @@
preempt_enable();
}
+/*
+ * Version of write_gdt_entry for use at early boot-time needed to
+ * update an entry as simply as possible.
+ */
+static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
+ const void *desc, int type)
+{
+ switch (type) {
+ case DESC_LDT:
+ case DESC_TSS:
+ /* ignore */
+ break;
+
+ default: {
+ xmaddr_t maddr = virt_to_machine(&dt[entry]);
+
+ if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
+ dt[entry] = *(struct desc_struct *)desc;
+ }
+
+ }
+}
+
static void xen_load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
@@ -713,7 +786,7 @@
set:
base = ((u64)high << 32) | low;
if (HYPERVISOR_set_segment_base(which, base) != 0)
- ret = -EFAULT;
+ ret = -EIO;
break;
#endif
@@ -964,6 +1037,23 @@
.emergency_restart = xen_emergency_restart,
};
+/*
+ * Set up the GDT and segment registers for -fstack-protector. Until
+ * we do this, we have to be careful not to call any stack-protected
+ * function, which is most of the kernel.
+ */
+static void __init xen_setup_stackprotector(void)
+{
+ pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
+ pv_cpu_ops.load_gdt = xen_load_gdt_boot;
+
+ setup_stack_canary_segment(0);
+ switch_to_new_gdt(0);
+
+ pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry;
+ pv_cpu_ops.load_gdt = xen_load_gdt;
+}
+
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
@@ -974,10 +1064,6 @@
xen_domain_type = XEN_PV_DOMAIN;
- BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
- xen_setup_features();
-
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
@@ -986,8 +1072,30 @@
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
- xen_init_irq_ops();
+ /*
+ * Set up some pagetable state before starting to set any ptes.
+ */
+ /* Prevent unwanted bits from being set in PTEs. */
+ __supported_pte_mask &= ~_PAGE_GLOBAL;
+ if (!xen_initial_domain())
+ __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
+ __supported_pte_mask |= _PAGE_IOMAP;
+
+ xen_setup_features();
+
+ /* Get mfn list */
+ if (!xen_feature(XENFEAT_auto_translated_physmap))
+ xen_build_dynamic_phys_to_machine();
+
+ /*
+ * Set up kernel GDT and segment registers, mainly so that
+ * -fstack-protector code can be executed.
+ */
+ xen_setup_stackprotector();
+
+ xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
@@ -1004,13 +1112,6 @@
machine_ops = xen_machine_ops;
-#ifdef CONFIG_X86_64
- /*
- * Setup percpu state. We only need to do this for 64-bit
- * because 32-bit already has %fs set properly.
- */
- load_percpu_segment(0);
-#endif
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
@@ -1020,17 +1121,8 @@
xen_smp_init();
- /* Get mfn list */
- if (!xen_feature(XENFEAT_auto_translated_physmap))
- xen_build_dynamic_phys_to_machine();
-
pgd = (pgd_t *)xen_start_info->pt_base;
- /* Prevent unwanted bits from being set in PTEs. */
- __supported_pte_mask &= ~_PAGE_GLOBAL;
- if (!xen_initial_domain())
- __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
#ifdef CONFIG_X86_64
/* Work out if we support NX */
check_efer();
@@ -1061,6 +1153,7 @@
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
+ new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 429834e..fe03eee 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -236,6 +236,7 @@
ctxt->user_regs.ss = __KERNEL_DS;
#ifdef CONFIG_X86_32
ctxt->user_regs.fs = __KERNEL_PERCPU;
+ ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
#else
ctxt->gs_base_kernel = per_cpu_offset(cpu);
#endif
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 5601506..36a5141 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -187,7 +187,6 @@
struct xen_spinlock *prev;
int irq = __get_cpu_var(lock_kicker_irq);
int ret;
- unsigned long flags;
u64 start;
/* If kicker interrupts not initialized yet, just spin */
@@ -199,16 +198,12 @@
/* announce we're spinning */
prev = spinning_lock(xl);
- flags = __raw_local_save_flags();
- if (irq_enable) {
- ADD_STATS(taken_slow_irqenable, 1);
- raw_local_irq_enable();
- }
-
ADD_STATS(taken_slow, 1);
ADD_STATS(taken_slow_nested, prev != NULL);
do {
+ unsigned long flags;
+
/* clear pending */
xen_clear_irq_pending(irq);
@@ -228,6 +223,12 @@
goto out;
}
+ flags = __raw_local_save_flags();
+ if (irq_enable) {
+ ADD_STATS(taken_slow_irqenable, 1);
+ raw_local_irq_enable();
+ }
+
/*
* Block until irq becomes pending. If we're
* interrupted at this point (after the trylock but
@@ -238,13 +239,15 @@
* pending.
*/
xen_poll_irq(irq);
+
+ raw_local_irq_restore(flags);
+
ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
} while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */
kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
out:
- raw_local_irq_restore(flags);
unspinning_lock(xl, prev);
spin_time_accum_blocked(start);
@@ -323,8 +326,13 @@
smp_wmb(); /* make sure no writes get moved after unlock */
xl->lock = 0; /* release lock */
- /* make sure unlock happens before kick */
- barrier();
+ /*
+ * Make sure unlock happens before checking for waiting
+ * spinners. We need a strong barrier to enforce the
+ * write-read ordering to different memory locations, as the
+ * CPU makes no implied guarantees about their ordering.
+ */
+ mb();
if (unlikely(xl->spinners))
xen_spin_unlock_slow(xl);
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index dd1a7a4..beb3a6b 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -68,4 +68,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index edad415..2f0b86b 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -545,7 +545,7 @@
spin_unlock_irqrestore(&lp->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/block/blk-core.c b/block/blk-core.c
index e3299a7..e695634 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -501,6 +501,7 @@
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
+ q->backing_dev_info.name = "block";
err = bdi_init(&q->backing_dev_info);
if (err) {
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 418d636..d3aa2aa 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -133,7 +133,7 @@
return -EINVAL;
spin_lock_irq(q->queue_lock);
- blk_queue_max_sectors(q, max_sectors_kb << 1);
+ q->limits.max_sectors = max_sectors_kb << 1;
spin_unlock_irq(q->queue_lock);
return ret;
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 4dfdd03..26b5dd0 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -23,11 +23,13 @@
config CRYPTO_FIPS
bool "FIPS 200 compliance"
+ depends on CRYPTO_ANSI_CPRNG
help
This options enables the fips boot option which is
required if you want to system to operate in a FIPS 200
certification. You should say no unless you know what
- this is.
+ this is. Note that CRYPTO_ANSI_CPRNG is requred if this
+ option is selected
config CRYPTO_ALGAPI
tristate
@@ -156,7 +158,7 @@
tristate "GCM/GMAC support"
select CRYPTO_CTR
select CRYPTO_AEAD
- select CRYPTO_GF128MUL
+ select CRYPTO_GHASH
help
Support for Galois/Counter Mode (GCM) and Galois Message
Authentication Code (GMAC). Required for IPSec.
@@ -267,6 +269,18 @@
http://csrc.nist.gov/encryption/modes/proposedmodes/
xcbc-mac/xcbc-mac-spec.pdf
+config CRYPTO_VMAC
+ tristate "VMAC support"
+ depends on EXPERIMENTAL
+ select CRYPTO_HASH
+ select CRYPTO_MANAGER
+ help
+ VMAC is a message authentication algorithm designed for
+ very high speed on 64-bit architectures.
+
+ See also:
+ <http://fastcrypto.org/vmac>
+
comment "Digest"
config CRYPTO_CRC32C
@@ -289,6 +303,13 @@
gain performance compared with software implementation.
Module will be crc32c-intel.
+config CRYPTO_GHASH
+ tristate "GHASH digest algorithm"
+ select CRYPTO_SHASH
+ select CRYPTO_GF128MUL
+ help
+ GHASH is message digest algorithm for GCM (Galois/Counter Mode).
+
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH
@@ -780,13 +801,14 @@
config CRYPTO_ANSI_CPRNG
tristate "Pseudo Random Number Generation for Cryptographic modules"
+ default m
select CRYPTO_AES
select CRYPTO_RNG
- select CRYPTO_FIPS
help
This option enables the generic pseudo random number generator
for cryptographic modules. Uses the Algorithm specified in
- ANSI X9.31 A.2.4
+ ANSI X9.31 A.2.4. Not this option must be enabled if CRYPTO_FIPS
+ is selected
source "drivers/crypto/Kconfig"
diff --git a/crypto/Makefile b/crypto/Makefile
index 673d9f7..9e8f619 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -3,7 +3,7 @@
#
obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-objs := api.o cipher.o digest.o compress.o
+crypto-objs := api.o cipher.o compress.o
obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
@@ -22,7 +22,6 @@
obj-$(CONFIG_CRYPTO_BLKCIPHER2) += eseqiv.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
-crypto_hash-objs := hash.o
crypto_hash-objs += ahash.o
crypto_hash-objs += shash.o
obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
@@ -33,6 +32,7 @@
obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
+obj-$(CONFIG_CRYPTO_VMAC) += vmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
obj-$(CONFIG_CRYPTO_MD4) += md4.o
@@ -83,6 +83,7 @@
obj-$(CONFIG_CRYPTO_RNG2) += krng.o
obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
#
# generic algorithms and the async_tx api
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index e11ce37..f6f0833 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -14,6 +14,7 @@
*/
#include <crypto/internal/skcipher.h>
+#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -25,6 +26,8 @@
#include "internal.h"
+static const char *skcipher_default_geniv __read_mostly;
+
static int setkey_unaligned(struct crypto_ablkcipher *tfm, const u8 *key,
unsigned int keylen)
{
@@ -180,7 +183,14 @@
const char *crypto_default_geniv(const struct crypto_alg *alg)
{
- return alg->cra_flags & CRYPTO_ALG_ASYNC ? "eseqiv" : "chainiv";
+ if (((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) ==
+ CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize :
+ alg->cra_ablkcipher.ivsize) !=
+ alg->cra_blocksize)
+ return "chainiv";
+
+ return alg->cra_flags & CRYPTO_ALG_ASYNC ?
+ "eseqiv" : skcipher_default_geniv;
}
static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask)
@@ -201,8 +211,9 @@
int err;
larval = crypto_larval_lookup(alg->cra_driver_name,
+ (type & ~CRYPTO_ALG_TYPE_MASK) |
CRYPTO_ALG_TYPE_GIVCIPHER,
- CRYPTO_ALG_TYPE_MASK);
+ mask | CRYPTO_ALG_TYPE_MASK);
err = PTR_ERR(larval);
if (IS_ERR(larval))
goto out;
@@ -360,3 +371,17 @@
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
+
+static int __init skcipher_module_init(void)
+{
+ skcipher_default_geniv = num_possible_cpus() > 1 ?
+ "eseqiv" : "chainiv";
+ return 0;
+}
+
+static void skcipher_module_exit(void)
+{
+}
+
+module_init(skcipher_module_init);
+module_exit(skcipher_module_exit);
diff --git a/crypto/aes_generic.c b/crypto/aes_generic.c
index b8b66ec..e78b7ee 100644
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1174,7 +1174,7 @@
ctx->key_enc[6 * i + 11] = t; \
} while (0)
-#define loop8(i) do { \
+#define loop8tophalf(i) do { \
t = ror32(t, 8); \
t = ls_box(t) ^ rco_tab[i]; \
t ^= ctx->key_enc[8 * i]; \
@@ -1185,6 +1185,10 @@
ctx->key_enc[8 * i + 10] = t; \
t ^= ctx->key_enc[8 * i + 3]; \
ctx->key_enc[8 * i + 11] = t; \
+} while (0)
+
+#define loop8(i) do { \
+ loop8tophalf(i); \
t = ctx->key_enc[8 * i + 4] ^ ls_box(t); \
ctx->key_enc[8 * i + 12] = t; \
t ^= ctx->key_enc[8 * i + 5]; \
@@ -1245,8 +1249,9 @@
ctx->key_enc[5] = le32_to_cpu(key[5]);
ctx->key_enc[6] = le32_to_cpu(key[6]);
t = ctx->key_enc[7] = le32_to_cpu(key[7]);
- for (i = 0; i < 7; ++i)
+ for (i = 0; i < 6; ++i)
loop8(i);
+ loop8tophalf(i);
break;
}
diff --git a/crypto/ahash.c b/crypto/ahash.c
index f347637..33a4ff4 100644
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -24,6 +24,19 @@
#include "internal.h"
+struct ahash_request_priv {
+ crypto_completion_t complete;
+ void *data;
+ u8 *result;
+ void *ubuf[] CRYPTO_MINALIGN_ATTR;
+};
+
+static inline struct ahash_alg *crypto_ahash_alg(struct crypto_ahash *hash)
+{
+ return container_of(crypto_hash_alg_common(hash), struct ahash_alg,
+ halg);
+}
+
static int hash_walk_next(struct crypto_hash_walk *walk)
{
unsigned int alignmask = walk->alignmask;
@@ -132,36 +145,34 @@
static int ahash_setkey_unaligned(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
{
- struct ahash_alg *ahash = crypto_ahash_alg(tfm);
unsigned long alignmask = crypto_ahash_alignmask(tfm);
int ret;
u8 *buffer, *alignbuffer;
unsigned long absize;
absize = keylen + alignmask;
- buffer = kmalloc(absize, GFP_ATOMIC);
+ buffer = kmalloc(absize, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
memcpy(alignbuffer, key, keylen);
- ret = ahash->setkey(tfm, alignbuffer, keylen);
- memset(alignbuffer, 0, keylen);
- kfree(buffer);
+ ret = tfm->setkey(tfm, alignbuffer, keylen);
+ kzfree(buffer);
return ret;
}
-static int ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
+int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
{
- struct ahash_alg *ahash = crypto_ahash_alg(tfm);
unsigned long alignmask = crypto_ahash_alignmask(tfm);
if ((unsigned long)key & alignmask)
return ahash_setkey_unaligned(tfm, key, keylen);
- return ahash->setkey(tfm, key, keylen);
+ return tfm->setkey(tfm, key, keylen);
}
+EXPORT_SYMBOL_GPL(crypto_ahash_setkey);
static int ahash_nosetkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
@@ -169,42 +180,219 @@
return -ENOSYS;
}
-int crypto_ahash_import(struct ahash_request *req, const u8 *in)
+static inline unsigned int ahash_align_buffer_size(unsigned len,
+ unsigned long mask)
+{
+ return len + (mask & ~(crypto_tfm_ctx_alignment() - 1));
+}
+
+static void ahash_op_unaligned_finish(struct ahash_request *req, int err)
+{
+ struct ahash_request_priv *priv = req->priv;
+
+ if (err == -EINPROGRESS)
+ return;
+
+ if (!err)
+ memcpy(priv->result, req->result,
+ crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
+
+ kzfree(priv);
+}
+
+static void ahash_op_unaligned_done(struct crypto_async_request *req, int err)
+{
+ struct ahash_request *areq = req->data;
+ struct ahash_request_priv *priv = areq->priv;
+ crypto_completion_t complete = priv->complete;
+ void *data = priv->data;
+
+ ahash_op_unaligned_finish(areq, err);
+
+ complete(data, err);
+}
+
+static int ahash_op_unaligned(struct ahash_request *req,
+ int (*op)(struct ahash_request *))
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
- struct ahash_alg *alg = crypto_ahash_alg(tfm);
+ unsigned long alignmask = crypto_ahash_alignmask(tfm);
+ unsigned int ds = crypto_ahash_digestsize(tfm);
+ struct ahash_request_priv *priv;
+ int err;
- memcpy(ahash_request_ctx(req), in, crypto_ahash_reqsize(tfm));
+ priv = kmalloc(sizeof(*priv) + ahash_align_buffer_size(ds, alignmask),
+ (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+ GFP_KERNEL : GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
- if (alg->reinit)
- alg->reinit(req);
+ priv->result = req->result;
+ priv->complete = req->base.complete;
+ priv->data = req->base.data;
+
+ req->result = PTR_ALIGN((u8 *)priv->ubuf, alignmask + 1);
+ req->base.complete = ahash_op_unaligned_done;
+ req->base.data = req;
+ req->priv = priv;
+
+ err = op(req);
+ ahash_op_unaligned_finish(req, err);
+
+ return err;
+}
+
+static int crypto_ahash_op(struct ahash_request *req,
+ int (*op)(struct ahash_request *))
+{
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ unsigned long alignmask = crypto_ahash_alignmask(tfm);
+
+ if ((unsigned long)req->result & alignmask)
+ return ahash_op_unaligned(req, op);
+
+ return op(req);
+}
+
+int crypto_ahash_final(struct ahash_request *req)
+{
+ return crypto_ahash_op(req, crypto_ahash_reqtfm(req)->final);
+}
+EXPORT_SYMBOL_GPL(crypto_ahash_final);
+
+int crypto_ahash_finup(struct ahash_request *req)
+{
+ return crypto_ahash_op(req, crypto_ahash_reqtfm(req)->finup);
+}
+EXPORT_SYMBOL_GPL(crypto_ahash_finup);
+
+int crypto_ahash_digest(struct ahash_request *req)
+{
+ return crypto_ahash_op(req, crypto_ahash_reqtfm(req)->digest);
+}
+EXPORT_SYMBOL_GPL(crypto_ahash_digest);
+
+static void ahash_def_finup_finish2(struct ahash_request *req, int err)
+{
+ struct ahash_request_priv *priv = req->priv;
+
+ if (err == -EINPROGRESS)
+ return;
+
+ if (!err)
+ memcpy(priv->result, req->result,
+ crypto_ahash_digestsize(crypto_ahash_reqtfm(req)));
+
+ kzfree(priv);
+}
+
+static void ahash_def_finup_done2(struct crypto_async_request *req, int err)
+{
+ struct ahash_request *areq = req->data;
+ struct ahash_request_priv *priv = areq->priv;
+ crypto_completion_t complete = priv->complete;
+ void *data = priv->data;
+
+ ahash_def_finup_finish2(areq, err);
+
+ complete(data, err);
+}
+
+static int ahash_def_finup_finish1(struct ahash_request *req, int err)
+{
+ if (err)
+ goto out;
+
+ req->base.complete = ahash_def_finup_done2;
+ req->base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = crypto_ahash_reqtfm(req)->final(req);
+
+out:
+ ahash_def_finup_finish2(req, err);
+ return err;
+}
+
+static void ahash_def_finup_done1(struct crypto_async_request *req, int err)
+{
+ struct ahash_request *areq = req->data;
+ struct ahash_request_priv *priv = areq->priv;
+ crypto_completion_t complete = priv->complete;
+ void *data = priv->data;
+
+ err = ahash_def_finup_finish1(areq, err);
+
+ complete(data, err);
+}
+
+static int ahash_def_finup(struct ahash_request *req)
+{
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ unsigned long alignmask = crypto_ahash_alignmask(tfm);
+ unsigned int ds = crypto_ahash_digestsize(tfm);
+ struct ahash_request_priv *priv;
+
+ priv = kmalloc(sizeof(*priv) + ahash_align_buffer_size(ds, alignmask),
+ (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+ GFP_KERNEL : GFP_ATOMIC);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->result = req->result;
+ priv->complete = req->base.complete;
+ priv->data = req->base.data;
+
+ req->result = PTR_ALIGN((u8 *)priv->ubuf, alignmask + 1);
+ req->base.complete = ahash_def_finup_done1;
+ req->base.data = req;
+ req->priv = priv;
+
+ return ahash_def_finup_finish1(req, tfm->update(req));
+}
+
+static int ahash_no_export(struct ahash_request *req, void *out)
+{
+ return -ENOSYS;
+}
+
+static int ahash_no_import(struct ahash_request *req, const void *in)
+{
+ return -ENOSYS;
+}
+
+static int crypto_ahash_init_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_ahash *hash = __crypto_ahash_cast(tfm);
+ struct ahash_alg *alg = crypto_ahash_alg(hash);
+
+ hash->setkey = ahash_nosetkey;
+ hash->export = ahash_no_export;
+ hash->import = ahash_no_import;
+
+ if (tfm->__crt_alg->cra_type != &crypto_ahash_type)
+ return crypto_init_shash_ops_async(tfm);
+
+ hash->init = alg->init;
+ hash->update = alg->update;
+ hash->final = alg->final;
+ hash->finup = alg->finup ?: ahash_def_finup;
+ hash->digest = alg->digest;
+
+ if (alg->setkey)
+ hash->setkey = alg->setkey;
+ if (alg->export)
+ hash->export = alg->export;
+ if (alg->import)
+ hash->import = alg->import;
return 0;
}
-EXPORT_SYMBOL_GPL(crypto_ahash_import);
-static unsigned int crypto_ahash_ctxsize(struct crypto_alg *alg, u32 type,
- u32 mask)
+static unsigned int crypto_ahash_extsize(struct crypto_alg *alg)
{
- return alg->cra_ctxsize;
-}
+ if (alg->cra_type == &crypto_ahash_type)
+ return alg->cra_ctxsize;
-static int crypto_init_ahash_ops(struct crypto_tfm *tfm, u32 type, u32 mask)
-{
- struct ahash_alg *alg = &tfm->__crt_alg->cra_ahash;
- struct ahash_tfm *crt = &tfm->crt_ahash;
-
- if (alg->digestsize > PAGE_SIZE / 8)
- return -EINVAL;
-
- crt->init = alg->init;
- crt->update = alg->update;
- crt->final = alg->final;
- crt->digest = alg->digest;
- crt->setkey = alg->setkey ? ahash_setkey : ahash_nosetkey;
- crt->digestsize = alg->digestsize;
-
- return 0;
+ return sizeof(struct crypto_shash *);
}
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
@@ -215,17 +403,101 @@
seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ?
"yes" : "no");
seq_printf(m, "blocksize : %u\n", alg->cra_blocksize);
- seq_printf(m, "digestsize : %u\n", alg->cra_ahash.digestsize);
+ seq_printf(m, "digestsize : %u\n",
+ __crypto_hash_alg_common(alg)->digestsize);
}
const struct crypto_type crypto_ahash_type = {
- .ctxsize = crypto_ahash_ctxsize,
- .init = crypto_init_ahash_ops,
+ .extsize = crypto_ahash_extsize,
+ .init_tfm = crypto_ahash_init_tfm,
#ifdef CONFIG_PROC_FS
.show = crypto_ahash_show,
#endif
+ .maskclear = ~CRYPTO_ALG_TYPE_MASK,
+ .maskset = CRYPTO_ALG_TYPE_AHASH_MASK,
+ .type = CRYPTO_ALG_TYPE_AHASH,
+ .tfmsize = offsetof(struct crypto_ahash, base),
};
EXPORT_SYMBOL_GPL(crypto_ahash_type);
+struct crypto_ahash *crypto_alloc_ahash(const char *alg_name, u32 type,
+ u32 mask)
+{
+ return crypto_alloc_tfm(alg_name, &crypto_ahash_type, type, mask);
+}
+EXPORT_SYMBOL_GPL(crypto_alloc_ahash);
+
+static int ahash_prepare_alg(struct ahash_alg *alg)
+{
+ struct crypto_alg *base = &alg->halg.base;
+
+ if (alg->halg.digestsize > PAGE_SIZE / 8 ||
+ alg->halg.statesize > PAGE_SIZE / 8)
+ return -EINVAL;
+
+ base->cra_type = &crypto_ahash_type;
+ base->cra_flags &= ~CRYPTO_ALG_TYPE_MASK;
+ base->cra_flags |= CRYPTO_ALG_TYPE_AHASH;
+
+ return 0;
+}
+
+int crypto_register_ahash(struct ahash_alg *alg)
+{
+ struct crypto_alg *base = &alg->halg.base;
+ int err;
+
+ err = ahash_prepare_alg(alg);
+ if (err)
+ return err;
+
+ return crypto_register_alg(base);
+}
+EXPORT_SYMBOL_GPL(crypto_register_ahash);
+
+int crypto_unregister_ahash(struct ahash_alg *alg)
+{
+ return crypto_unregister_alg(&alg->halg.base);
+}
+EXPORT_SYMBOL_GPL(crypto_unregister_ahash);
+
+int ahash_register_instance(struct crypto_template *tmpl,
+ struct ahash_instance *inst)
+{
+ int err;
+
+ err = ahash_prepare_alg(&inst->alg);
+ if (err)
+ return err;
+
+ return crypto_register_instance(tmpl, ahash_crypto_instance(inst));
+}
+EXPORT_SYMBOL_GPL(ahash_register_instance);
+
+void ahash_free_instance(struct crypto_instance *inst)
+{
+ crypto_drop_spawn(crypto_instance_ctx(inst));
+ kfree(ahash_instance(inst));
+}
+EXPORT_SYMBOL_GPL(ahash_free_instance);
+
+int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
+ struct hash_alg_common *alg,
+ struct crypto_instance *inst)
+{
+ return crypto_init_spawn2(&spawn->base, &alg->base, inst,
+ &crypto_ahash_type);
+}
+EXPORT_SYMBOL_GPL(crypto_init_ahash_spawn);
+
+struct hash_alg_common *ahash_attr_alg(struct rtattr *rta, u32 type, u32 mask)
+{
+ struct crypto_alg *alg;
+
+ alg = crypto_attr_alg2(rta, &crypto_ahash_type, type, mask);
+ return IS_ERR(alg) ? ERR_CAST(alg) : __crypto_hash_alg_common(alg);
+}
+EXPORT_SYMBOL_GPL(ahash_attr_alg);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Asynchronous cryptographic hash type");
diff --git a/crypto/algapi.c b/crypto/algapi.c
index 56c62e2..f149b1c 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -81,16 +81,35 @@
crypto_tmpl_put(tmpl);
}
+static struct list_head *crypto_more_spawns(struct crypto_alg *alg,
+ struct list_head *stack,
+ struct list_head *top,
+ struct list_head *secondary_spawns)
+{
+ struct crypto_spawn *spawn, *n;
+
+ if (list_empty(stack))
+ return NULL;
+
+ spawn = list_first_entry(stack, struct crypto_spawn, list);
+ n = list_entry(spawn->list.next, struct crypto_spawn, list);
+
+ if (spawn->alg && &n->list != stack && !n->alg)
+ n->alg = (n->list.next == stack) ? alg :
+ &list_entry(n->list.next, struct crypto_spawn,
+ list)->inst->alg;
+
+ list_move(&spawn->list, secondary_spawns);
+
+ return &n->list == stack ? top : &n->inst->alg.cra_users;
+}
+
static void crypto_remove_spawn(struct crypto_spawn *spawn,
- struct list_head *list,
- struct list_head *secondary_spawns)
+ struct list_head *list)
{
struct crypto_instance *inst = spawn->inst;
struct crypto_template *tmpl = inst->tmpl;
- list_del_init(&spawn->list);
- spawn->alg = NULL;
-
if (crypto_is_dead(&inst->alg))
return;
@@ -106,25 +125,55 @@
hlist_del(&inst->list);
inst->alg.cra_destroy = crypto_destroy_instance;
- list_splice(&inst->alg.cra_users, secondary_spawns);
+ BUG_ON(!list_empty(&inst->alg.cra_users));
}
-static void crypto_remove_spawns(struct list_head *spawns,
- struct list_head *list, u32 new_type)
+static void crypto_remove_spawns(struct crypto_alg *alg,
+ struct list_head *list,
+ struct crypto_alg *nalg)
{
+ u32 new_type = (nalg ?: alg)->cra_flags;
struct crypto_spawn *spawn, *n;
LIST_HEAD(secondary_spawns);
+ struct list_head *spawns;
+ LIST_HEAD(stack);
+ LIST_HEAD(top);
+ spawns = &alg->cra_users;
list_for_each_entry_safe(spawn, n, spawns, list) {
if ((spawn->alg->cra_flags ^ new_type) & spawn->mask)
continue;
- crypto_remove_spawn(spawn, list, &secondary_spawns);
+ list_move(&spawn->list, &top);
}
- while (!list_empty(&secondary_spawns)) {
- list_for_each_entry_safe(spawn, n, &secondary_spawns, list)
- crypto_remove_spawn(spawn, list, &secondary_spawns);
+ spawns = ⊤
+ do {
+ while (!list_empty(spawns)) {
+ struct crypto_instance *inst;
+
+ spawn = list_first_entry(spawns, struct crypto_spawn,
+ list);
+ inst = spawn->inst;
+
+ BUG_ON(&inst->alg == alg);
+
+ list_move(&spawn->list, &stack);
+
+ if (&inst->alg == nalg)
+ break;
+
+ spawn->alg = NULL;
+ spawns = &inst->alg.cra_users;
+ }
+ } while ((spawns = crypto_more_spawns(alg, &stack, &top,
+ &secondary_spawns)));
+
+ list_for_each_entry_safe(spawn, n, &secondary_spawns, list) {
+ if (spawn->alg)
+ list_move(&spawn->list, &spawn->alg->cra_users);
+ else
+ crypto_remove_spawn(spawn, list);
}
}
@@ -258,7 +307,7 @@
q->cra_priority > alg->cra_priority)
continue;
- crypto_remove_spawns(&q->cra_users, &list, alg->cra_flags);
+ crypto_remove_spawns(q, &list, alg);
}
complete:
@@ -330,7 +379,7 @@
crypto_notify(CRYPTO_MSG_ALG_UNREGISTER, alg);
list_del_init(&alg->cra_list);
- crypto_remove_spawns(&alg->cra_users, list, alg->cra_flags);
+ crypto_remove_spawns(alg, list, NULL);
return 0;
}
@@ -488,20 +537,38 @@
}
EXPORT_SYMBOL_GPL(crypto_init_spawn);
+int crypto_init_spawn2(struct crypto_spawn *spawn, struct crypto_alg *alg,
+ struct crypto_instance *inst,
+ const struct crypto_type *frontend)
+{
+ int err = -EINVAL;
+
+ if (frontend && (alg->cra_flags ^ frontend->type) & frontend->maskset)
+ goto out;
+
+ spawn->frontend = frontend;
+ err = crypto_init_spawn(spawn, alg, inst, frontend->maskset);
+
+out:
+ return err;
+}
+EXPORT_SYMBOL_GPL(crypto_init_spawn2);
+
void crypto_drop_spawn(struct crypto_spawn *spawn)
{
+ if (!spawn->alg)
+ return;
+
down_write(&crypto_alg_sem);
list_del(&spawn->list);
up_write(&crypto_alg_sem);
}
EXPORT_SYMBOL_GPL(crypto_drop_spawn);
-struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
- u32 mask)
+static struct crypto_alg *crypto_spawn_alg(struct crypto_spawn *spawn)
{
struct crypto_alg *alg;
struct crypto_alg *alg2;
- struct crypto_tfm *tfm;
down_read(&crypto_alg_sem);
alg = spawn->alg;
@@ -516,6 +583,19 @@
return ERR_PTR(-EAGAIN);
}
+ return alg;
+}
+
+struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
+ u32 mask)
+{
+ struct crypto_alg *alg;
+ struct crypto_tfm *tfm;
+
+ alg = crypto_spawn_alg(spawn);
+ if (IS_ERR(alg))
+ return ERR_CAST(alg);
+
tfm = ERR_PTR(-EINVAL);
if (unlikely((alg->cra_flags ^ type) & mask))
goto out_put_alg;
@@ -532,6 +612,27 @@
}
EXPORT_SYMBOL_GPL(crypto_spawn_tfm);
+void *crypto_spawn_tfm2(struct crypto_spawn *spawn)
+{
+ struct crypto_alg *alg;
+ struct crypto_tfm *tfm;
+
+ alg = crypto_spawn_alg(spawn);
+ if (IS_ERR(alg))
+ return ERR_CAST(alg);
+
+ tfm = crypto_create_tfm(alg, spawn->frontend);
+ if (IS_ERR(tfm))
+ goto out_put_alg;
+
+ return tfm;
+
+out_put_alg:
+ crypto_mod_put(alg);
+ return tfm;
+}
+EXPORT_SYMBOL_GPL(crypto_spawn_tfm2);
+
int crypto_register_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&crypto_chain, nb);
@@ -595,7 +696,9 @@
}
EXPORT_SYMBOL_GPL(crypto_attr_alg_name);
-struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask)
+struct crypto_alg *crypto_attr_alg2(struct rtattr *rta,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask)
{
const char *name;
int err;
@@ -605,9 +708,9 @@
if (IS_ERR(name))
return ERR_PTR(err);
- return crypto_alg_mod_lookup(name, type, mask);
+ return crypto_find_alg(name, frontend, type, mask);
}
-EXPORT_SYMBOL_GPL(crypto_attr_alg);
+EXPORT_SYMBOL_GPL(crypto_attr_alg2);
int crypto_attr_u32(struct rtattr *rta, u32 *num)
{
@@ -627,17 +730,20 @@
}
EXPORT_SYMBOL_GPL(crypto_attr_u32);
-struct crypto_instance *crypto_alloc_instance(const char *name,
- struct crypto_alg *alg)
+void *crypto_alloc_instance2(const char *name, struct crypto_alg *alg,
+ unsigned int head)
{
struct crypto_instance *inst;
- struct crypto_spawn *spawn;
+ char *p;
int err;
- inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL);
- if (!inst)
+ p = kzalloc(head + sizeof(*inst) + sizeof(struct crypto_spawn),
+ GFP_KERNEL);
+ if (!p)
return ERR_PTR(-ENOMEM);
+ inst = (void *)(p + head);
+
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, "%s(%s)", name,
alg->cra_name) >= CRYPTO_MAX_ALG_NAME)
@@ -647,6 +753,25 @@
name, alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto err_free_inst;
+ return p;
+
+err_free_inst:
+ kfree(p);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(crypto_alloc_instance2);
+
+struct crypto_instance *crypto_alloc_instance(const char *name,
+ struct crypto_alg *alg)
+{
+ struct crypto_instance *inst;
+ struct crypto_spawn *spawn;
+ int err;
+
+ inst = crypto_alloc_instance2(name, alg, 0);
+ if (IS_ERR(inst))
+ goto out;
+
spawn = crypto_instance_ctx(inst);
err = crypto_init_spawn(spawn, alg, inst,
CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC);
@@ -658,7 +783,10 @@
err_free_inst:
kfree(inst);
- return ERR_PTR(err);
+ inst = ERR_PTR(err);
+
+out:
+ return inst;
}
EXPORT_SYMBOL_GPL(crypto_alloc_instance);
@@ -692,7 +820,7 @@
}
EXPORT_SYMBOL_GPL(crypto_enqueue_request);
-struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset)
{
struct list_head *request;
@@ -707,7 +835,14 @@
request = queue->list.next;
list_del(request);
- return list_entry(request, struct crypto_async_request, list);
+ return (char *)list_entry(request, struct crypto_async_request, list) -
+ offset;
+}
+EXPORT_SYMBOL_GPL(__crypto_dequeue_request);
+
+struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+{
+ return __crypto_dequeue_request(queue, 0);
}
EXPORT_SYMBOL_GPL(crypto_dequeue_request);
diff --git a/crypto/algboss.c b/crypto/algboss.c
index 9908dd8..412241c 100644
--- a/crypto/algboss.c
+++ b/crypto/algboss.c
@@ -68,6 +68,11 @@
goto err;
do {
+ if (tmpl->create) {
+ err = tmpl->create(tmpl, param->tb);
+ continue;
+ }
+
inst = tmpl->alloc(param->tb);
if (IS_ERR(inst))
err = PTR_ERR(inst);
diff --git a/crypto/ansi_cprng.c b/crypto/ansi_cprng.c
index d80ed4c..3aa6e38 100644
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -187,7 +187,6 @@
/* Our exported functions */
static int get_prng_bytes(char *buf, size_t nbytes, struct prng_context *ctx)
{
- unsigned long flags;
unsigned char *ptr = buf;
unsigned int byte_count = (unsigned int)nbytes;
int err;
@@ -196,7 +195,7 @@
if (nbytes < 0)
return -EINVAL;
- spin_lock_irqsave(&ctx->prng_lock, flags);
+ spin_lock_bh(&ctx->prng_lock);
err = -EINVAL;
if (ctx->flags & PRNG_NEED_RESET)
@@ -268,7 +267,7 @@
goto remainder;
done:
- spin_unlock_irqrestore(&ctx->prng_lock, flags);
+ spin_unlock_bh(&ctx->prng_lock);
dbgprint(KERN_CRIT "returning %d from get_prng_bytes in context %p\n",
err, ctx);
return err;
@@ -284,10 +283,9 @@
unsigned char *V, unsigned char *DT)
{
int ret;
- int rc = -EINVAL;
unsigned char *prng_key;
- spin_lock(&ctx->prng_lock);
+ spin_lock_bh(&ctx->prng_lock);
ctx->flags |= PRNG_NEED_RESET;
prng_key = (key != NULL) ? key : (unsigned char *)DEFAULT_PRNG_KEY;
@@ -308,34 +306,20 @@
memset(ctx->rand_data, 0, DEFAULT_BLK_SZ);
memset(ctx->last_rand_data, 0, DEFAULT_BLK_SZ);
- if (ctx->tfm)
- crypto_free_cipher(ctx->tfm);
-
- ctx->tfm = crypto_alloc_cipher("aes", 0, 0);
- if (IS_ERR(ctx->tfm)) {
- dbgprint(KERN_CRIT "Failed to alloc tfm for context %p\n",
- ctx);
- ctx->tfm = NULL;
- goto out;
- }
-
ctx->rand_data_valid = DEFAULT_BLK_SZ;
ret = crypto_cipher_setkey(ctx->tfm, prng_key, klen);
if (ret) {
dbgprint(KERN_CRIT "PRNG: setkey() failed flags=%x\n",
crypto_cipher_get_flags(ctx->tfm));
- crypto_free_cipher(ctx->tfm);
goto out;
}
- rc = 0;
+ ret = 0;
ctx->flags &= ~PRNG_NEED_RESET;
out:
- spin_unlock(&ctx->prng_lock);
-
- return rc;
-
+ spin_unlock_bh(&ctx->prng_lock);
+ return ret;
}
static int cprng_init(struct crypto_tfm *tfm)
@@ -343,6 +327,12 @@
struct prng_context *ctx = crypto_tfm_ctx(tfm);
spin_lock_init(&ctx->prng_lock);
+ ctx->tfm = crypto_alloc_cipher("aes", 0, 0);
+ if (IS_ERR(ctx->tfm)) {
+ dbgprint(KERN_CRIT "Failed to alloc tfm for context %p\n",
+ ctx);
+ return PTR_ERR(ctx->tfm);
+ }
if (reset_prng_context(ctx, NULL, DEFAULT_PRNG_KSZ, NULL, NULL) < 0)
return -EINVAL;
@@ -418,17 +408,10 @@
/* Module initalization */
static int __init prng_mod_init(void)
{
- int ret = 0;
-
if (fips_enabled)
rng_alg.cra_priority += 200;
- ret = crypto_register_alg(&rng_alg);
-
- if (ret)
- goto out;
-out:
- return 0;
+ return crypto_register_alg(&rng_alg);
}
static void __exit prng_mod_fini(void)
diff --git a/crypto/api.c b/crypto/api.c
index d5944f9..798526d 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -285,13 +285,6 @@
switch (crypto_tfm_alg_type(tfm)) {
case CRYPTO_ALG_TYPE_CIPHER:
return crypto_init_cipher_ops(tfm);
-
- case CRYPTO_ALG_TYPE_DIGEST:
- if ((mask & CRYPTO_ALG_TYPE_HASH_MASK) !=
- CRYPTO_ALG_TYPE_HASH_MASK)
- return crypto_init_digest_ops_async(tfm);
- else
- return crypto_init_digest_ops(tfm);
case CRYPTO_ALG_TYPE_COMPRESS:
return crypto_init_compress_ops(tfm);
@@ -318,11 +311,7 @@
case CRYPTO_ALG_TYPE_CIPHER:
crypto_exit_cipher_ops(tfm);
break;
-
- case CRYPTO_ALG_TYPE_DIGEST:
- crypto_exit_digest_ops(tfm);
- break;
-
+
case CRYPTO_ALG_TYPE_COMPRESS:
crypto_exit_compress_ops(tfm);
break;
@@ -349,11 +338,7 @@
case CRYPTO_ALG_TYPE_CIPHER:
len += crypto_cipher_ctxsize(alg);
break;
-
- case CRYPTO_ALG_TYPE_DIGEST:
- len += crypto_digest_ctxsize(alg);
- break;
-
+
case CRYPTO_ALG_TYPE_COMPRESS:
len += crypto_compress_ctxsize(alg);
break;
@@ -472,7 +457,7 @@
int err = -ENOMEM;
tfmsize = frontend->tfmsize;
- total = tfmsize + sizeof(*tfm) + frontend->extsize(alg, frontend);
+ total = tfmsize + sizeof(*tfm) + frontend->extsize(alg);
mem = kzalloc(total, GFP_KERNEL);
if (mem == NULL)
@@ -481,7 +466,7 @@
tfm = (struct crypto_tfm *)(mem + tfmsize);
tfm->__crt_alg = alg;
- err = frontend->init_tfm(tfm, frontend);
+ err = frontend->init_tfm(tfm);
if (err)
goto out_free_tfm;
@@ -503,6 +488,27 @@
}
EXPORT_SYMBOL_GPL(crypto_create_tfm);
+struct crypto_alg *crypto_find_alg(const char *alg_name,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask)
+{
+ struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask) =
+ crypto_alg_mod_lookup;
+
+ if (frontend) {
+ type &= frontend->maskclear;
+ mask &= frontend->maskclear;
+ type |= frontend->type;
+ mask |= frontend->maskset;
+
+ if (frontend->lookup)
+ lookup = frontend->lookup;
+ }
+
+ return lookup(alg_name, type, mask);
+}
+EXPORT_SYMBOL_GPL(crypto_find_alg);
+
/*
* crypto_alloc_tfm - Locate algorithm and allocate transform
* @alg_name: Name of algorithm
@@ -526,21 +532,13 @@
void *crypto_alloc_tfm(const char *alg_name,
const struct crypto_type *frontend, u32 type, u32 mask)
{
- struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask);
void *tfm;
int err;
- type &= frontend->maskclear;
- mask &= frontend->maskclear;
- type |= frontend->type;
- mask |= frontend->maskset;
-
- lookup = frontend->lookup ?: crypto_alg_mod_lookup;
-
for (;;) {
struct crypto_alg *alg;
- alg = lookup(alg_name, type, mask);
+ alg = crypto_find_alg(alg_name, frontend, type, mask);
if (IS_ERR(alg)) {
err = PTR_ERR(alg);
goto err;
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 5793b64..4d6f49a 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -23,24 +23,36 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
+typedef u8 *(*authenc_ahash_t)(struct aead_request *req, unsigned int flags);
+
struct authenc_instance_ctx {
- struct crypto_spawn auth;
+ struct crypto_ahash_spawn auth;
struct crypto_skcipher_spawn enc;
};
struct crypto_authenc_ctx {
- spinlock_t auth_lock;
- struct crypto_hash *auth;
+ unsigned int reqoff;
+ struct crypto_ahash *auth;
struct crypto_ablkcipher *enc;
};
+struct authenc_request_ctx {
+ unsigned int cryptlen;
+ struct scatterlist *sg;
+ struct scatterlist asg[2];
+ struct scatterlist cipher[2];
+ crypto_completion_t complete;
+ crypto_completion_t update_complete;
+ char tail[];
+};
+
static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
unsigned int keylen)
{
unsigned int authkeylen;
unsigned int enckeylen;
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct crypto_hash *auth = ctx->auth;
+ struct crypto_ahash *auth = ctx->auth;
struct crypto_ablkcipher *enc = ctx->enc;
struct rtattr *rta = (void *)key;
struct crypto_authenc_key_param *param;
@@ -64,11 +76,11 @@
authkeylen = keylen - enckeylen;
- crypto_hash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
- crypto_hash_set_flags(auth, crypto_aead_get_flags(authenc) &
+ crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
+ crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_hash_setkey(auth, key, authkeylen);
- crypto_aead_set_flags(authenc, crypto_hash_get_flags(auth) &
+ err = crypto_ahash_setkey(auth, key, authkeylen);
+ crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
if (err)
@@ -103,40 +115,198 @@
sg_mark_end(head);
}
-static u8 *crypto_authenc_hash(struct aead_request *req, unsigned int flags,
- struct scatterlist *cipher,
- unsigned int cryptlen)
+static void authenc_geniv_ahash_update_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, ahreq->result,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_SLEEP,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_finup(ahreq);
+ if (err)
+ goto out;
+
+ scatterwalk_map_and_copy(ahreq->result, areq_ctx->sg,
+ areq_ctx->cryptlen,
+ crypto_aead_authsize(authenc), 1);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static void authenc_geniv_ahash_done(struct crypto_async_request *areq, int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ scatterwalk_map_and_copy(ahreq->result, areq_ctx->sg,
+ areq_ctx->cryptlen,
+ crypto_aead_authsize(authenc), 1);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static void authenc_verify_ahash_update_done(struct crypto_async_request *areq,
+ int err)
+{
+ u8 *ihash;
+ unsigned int authsize;
+ struct ablkcipher_request *abreq;
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, ahreq->result,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_SLEEP,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_finup(ahreq);
+ if (err)
+ goto out;
+
+ authsize = crypto_aead_authsize(authenc);
+ ihash = ahreq->result + authsize;
+ scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
+ authsize, 0);
+
+ err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+ if (err)
+ goto out;
+
+ abreq = aead_request_ctx(req);
+ ablkcipher_request_set_tfm(abreq, ctx->enc);
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ req->base.complete, req->base.data);
+ ablkcipher_request_set_crypt(abreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+
+ err = crypto_ablkcipher_decrypt(abreq);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static void authenc_verify_ahash_done(struct crypto_async_request *areq,
+ int err)
+{
+ u8 *ihash;
+ unsigned int authsize;
+ struct ablkcipher_request *abreq;
+ struct aead_request *req = areq->data;
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+
+ if (err)
+ goto out;
+
+ authsize = crypto_aead_authsize(authenc);
+ ihash = ahreq->result + authsize;
+ scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
+ authsize, 0);
+
+ err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+ if (err)
+ goto out;
+
+ abreq = aead_request_ctx(req);
+ ablkcipher_request_set_tfm(abreq, ctx->enc);
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ req->base.complete, req->base.data);
+ ablkcipher_request_set_crypt(abreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+
+ err = crypto_ablkcipher_decrypt(abreq);
+
+out:
+ aead_request_complete(req, err);
+}
+
+static u8 *crypto_authenc_ahash_fb(struct aead_request *req, unsigned int flags)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct crypto_hash *auth = ctx->auth;
- struct hash_desc desc = {
- .tfm = auth,
- .flags = aead_request_flags(req) & flags,
- };
- u8 *hash = aead_request_ctx(req);
+ struct crypto_ahash *auth = ctx->auth;
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+ u8 *hash = areq_ctx->tail;
int err;
- hash = (u8 *)ALIGN((unsigned long)hash + crypto_hash_alignmask(auth),
- crypto_hash_alignmask(auth) + 1);
+ hash = (u8 *)ALIGN((unsigned long)hash + crypto_ahash_alignmask(auth),
+ crypto_ahash_alignmask(auth) + 1);
- spin_lock_bh(&ctx->auth_lock);
- err = crypto_hash_init(&desc);
+ ahash_request_set_tfm(ahreq, auth);
+
+ err = crypto_ahash_init(ahreq);
if (err)
- goto auth_unlock;
+ return ERR_PTR(err);
- err = crypto_hash_update(&desc, req->assoc, req->assoclen);
+ ahash_request_set_crypt(ahreq, req->assoc, hash, req->assoclen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
+ areq_ctx->update_complete, req);
+
+ err = crypto_ahash_update(ahreq);
if (err)
- goto auth_unlock;
+ return ERR_PTR(err);
- err = crypto_hash_update(&desc, cipher, cryptlen);
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, hash,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_finup(ahreq);
if (err)
- goto auth_unlock;
+ return ERR_PTR(err);
- err = crypto_hash_final(&desc, hash);
-auth_unlock:
- spin_unlock_bh(&ctx->auth_lock);
+ return hash;
+}
+static u8 *crypto_authenc_ahash(struct aead_request *req, unsigned int flags)
+{
+ struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct crypto_ahash *auth = ctx->auth;
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
+ struct ahash_request *ahreq = (void *)(areq_ctx->tail + ctx->reqoff);
+ u8 *hash = areq_ctx->tail;
+ int err;
+
+ hash = (u8 *)ALIGN((unsigned long)hash + crypto_ahash_alignmask(auth),
+ crypto_ahash_alignmask(auth) + 1);
+
+ ahash_request_set_tfm(ahreq, auth);
+ ahash_request_set_crypt(ahreq, areq_ctx->sg, hash,
+ areq_ctx->cryptlen);
+ ahash_request_set_callback(ahreq, aead_request_flags(req) & flags,
+ areq_ctx->complete, req);
+
+ err = crypto_ahash_digest(ahreq);
if (err)
return ERR_PTR(err);
@@ -147,11 +317,15 @@
unsigned int flags)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
struct scatterlist *dst = req->dst;
- struct scatterlist cipher[2];
- struct page *dstp;
+ struct scatterlist *assoc = req->assoc;
+ struct scatterlist *cipher = areq_ctx->cipher;
+ struct scatterlist *asg = areq_ctx->asg;
unsigned int ivsize = crypto_aead_ivsize(authenc);
- unsigned int cryptlen;
+ unsigned int cryptlen = req->cryptlen;
+ authenc_ahash_t authenc_ahash_fn = crypto_authenc_ahash_fb;
+ struct page *dstp;
u8 *vdst;
u8 *hash;
@@ -163,10 +337,25 @@
sg_set_buf(cipher, iv, ivsize);
authenc_chain(cipher, dst, vdst == iv + ivsize);
dst = cipher;
+ cryptlen += ivsize;
}
- cryptlen = req->cryptlen + ivsize;
- hash = crypto_authenc_hash(req, flags, dst, cryptlen);
+ if (sg_is_last(assoc)) {
+ authenc_ahash_fn = crypto_authenc_ahash;
+ sg_init_table(asg, 2);
+ sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
+ authenc_chain(asg, dst, 0);
+ dst = asg;
+ cryptlen += req->assoclen;
+ }
+
+ areq_ctx->cryptlen = cryptlen;
+ areq_ctx->sg = dst;
+
+ areq_ctx->complete = authenc_geniv_ahash_done;
+ areq_ctx->update_complete = authenc_geniv_ahash_update_done;
+
+ hash = authenc_ahash_fn(req, flags);
if (IS_ERR(hash))
return PTR_ERR(hash);
@@ -256,22 +445,25 @@
}
static int crypto_authenc_verify(struct aead_request *req,
- struct scatterlist *cipher,
- unsigned int cryptlen)
+ authenc_ahash_t authenc_ahash_fn)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
u8 *ohash;
u8 *ihash;
unsigned int authsize;
- ohash = crypto_authenc_hash(req, CRYPTO_TFM_REQ_MAY_SLEEP, cipher,
- cryptlen);
+ areq_ctx->complete = authenc_verify_ahash_done;
+ areq_ctx->complete = authenc_verify_ahash_update_done;
+
+ ohash = authenc_ahash_fn(req, CRYPTO_TFM_REQ_MAY_SLEEP);
if (IS_ERR(ohash))
return PTR_ERR(ohash);
authsize = crypto_aead_authsize(authenc);
ihash = ohash + authsize;
- scatterwalk_map_and_copy(ihash, cipher, cryptlen, authsize, 0);
+ scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
+ authsize, 0);
return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0;
}
@@ -279,10 +471,14 @@
unsigned int cryptlen)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(req);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(req);
struct scatterlist *src = req->src;
- struct scatterlist cipher[2];
- struct page *srcp;
+ struct scatterlist *assoc = req->assoc;
+ struct scatterlist *cipher = areq_ctx->cipher;
+ struct scatterlist *asg = areq_ctx->asg;
unsigned int ivsize = crypto_aead_ivsize(authenc);
+ authenc_ahash_t authenc_ahash_fn = crypto_authenc_ahash_fb;
+ struct page *srcp;
u8 *vsrc;
srcp = sg_page(src);
@@ -293,9 +489,22 @@
sg_set_buf(cipher, iv, ivsize);
authenc_chain(cipher, src, vsrc == iv + ivsize);
src = cipher;
+ cryptlen += ivsize;
}
- return crypto_authenc_verify(req, src, cryptlen + ivsize);
+ if (sg_is_last(assoc)) {
+ authenc_ahash_fn = crypto_authenc_ahash;
+ sg_init_table(asg, 2);
+ sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
+ authenc_chain(asg, src, 0);
+ src = asg;
+ cryptlen += req->assoclen;
+ }
+
+ areq_ctx->cryptlen = cryptlen;
+ areq_ctx->sg = src;
+
+ return crypto_authenc_verify(req, authenc_ahash_fn);
}
static int crypto_authenc_decrypt(struct aead_request *req)
@@ -326,38 +535,41 @@
static int crypto_authenc_init_tfm(struct crypto_tfm *tfm)
{
- struct crypto_instance *inst = (void *)tfm->__crt_alg;
+ struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
struct authenc_instance_ctx *ictx = crypto_instance_ctx(inst);
struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm);
- struct crypto_hash *auth;
+ struct crypto_ahash *auth;
struct crypto_ablkcipher *enc;
int err;
- auth = crypto_spawn_hash(&ictx->auth);
+ auth = crypto_spawn_ahash(&ictx->auth);
if (IS_ERR(auth))
return PTR_ERR(auth);
+ ctx->reqoff = ALIGN(2 * crypto_ahash_digestsize(auth) +
+ crypto_ahash_alignmask(auth),
+ crypto_ahash_alignmask(auth) + 1);
+
enc = crypto_spawn_skcipher(&ictx->enc);
err = PTR_ERR(enc);
if (IS_ERR(enc))
- goto err_free_hash;
+ goto err_free_ahash;
ctx->auth = auth;
ctx->enc = enc;
+
tfm->crt_aead.reqsize = max_t(unsigned int,
- (crypto_hash_alignmask(auth) &
- ~(crypto_tfm_ctx_alignment() - 1)) +
- crypto_hash_digestsize(auth) * 2,
- sizeof(struct skcipher_givcrypt_request) +
- crypto_ablkcipher_reqsize(enc) +
- crypto_ablkcipher_ivsize(enc));
-
- spin_lock_init(&ctx->auth_lock);
+ crypto_ahash_reqsize(auth) + ctx->reqoff +
+ sizeof(struct authenc_request_ctx) +
+ sizeof(struct ahash_request),
+ sizeof(struct skcipher_givcrypt_request) +
+ crypto_ablkcipher_reqsize(enc) +
+ crypto_ablkcipher_ivsize(enc));
return 0;
-err_free_hash:
- crypto_free_hash(auth);
+err_free_ahash:
+ crypto_free_ahash(auth);
return err;
}
@@ -365,7 +577,7 @@
{
struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm);
- crypto_free_hash(ctx->auth);
+ crypto_free_ahash(ctx->auth);
crypto_free_ablkcipher(ctx->enc);
}
@@ -373,7 +585,8 @@
{
struct crypto_attr_type *algt;
struct crypto_instance *inst;
- struct crypto_alg *auth;
+ struct hash_alg_common *auth;
+ struct crypto_alg *auth_base;
struct crypto_alg *enc;
struct authenc_instance_ctx *ctx;
const char *enc_name;
@@ -387,11 +600,13 @@
if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
return ERR_PTR(-EINVAL);
- auth = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH,
- CRYPTO_ALG_TYPE_HASH_MASK);
+ auth = ahash_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH,
+ CRYPTO_ALG_TYPE_AHASH_MASK);
if (IS_ERR(auth))
return ERR_PTR(PTR_ERR(auth));
+ auth_base = &auth->base;
+
enc_name = crypto_attr_alg_name(tb[2]);
err = PTR_ERR(enc_name);
if (IS_ERR(enc_name))
@@ -404,7 +619,7 @@
ctx = crypto_instance_ctx(inst);
- err = crypto_init_spawn(&ctx->auth, auth, inst, CRYPTO_ALG_TYPE_MASK);
+ err = crypto_init_ahash_spawn(&ctx->auth, auth, inst);
if (err)
goto err_free_inst;
@@ -419,28 +634,25 @@
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME,
- "authenc(%s,%s)", auth->cra_name, enc->cra_name) >=
+ "authenc(%s,%s)", auth_base->cra_name, enc->cra_name) >=
CRYPTO_MAX_ALG_NAME)
goto err_drop_enc;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
- "authenc(%s,%s)", auth->cra_driver_name,
+ "authenc(%s,%s)", auth_base->cra_driver_name,
enc->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto err_drop_enc;
inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD;
inst->alg.cra_flags |= enc->cra_flags & CRYPTO_ALG_ASYNC;
- inst->alg.cra_priority = enc->cra_priority * 10 + auth->cra_priority;
+ inst->alg.cra_priority = enc->cra_priority *
+ 10 + auth_base->cra_priority;
inst->alg.cra_blocksize = enc->cra_blocksize;
- inst->alg.cra_alignmask = auth->cra_alignmask | enc->cra_alignmask;
+ inst->alg.cra_alignmask = auth_base->cra_alignmask | enc->cra_alignmask;
inst->alg.cra_type = &crypto_aead_type;
inst->alg.cra_aead.ivsize = enc->cra_ablkcipher.ivsize;
- inst->alg.cra_aead.maxauthsize = auth->cra_type == &crypto_hash_type ?
- auth->cra_hash.digestsize :
- auth->cra_type ?
- __crypto_shash_alg(auth)->digestsize :
- auth->cra_digest.dia_digestsize;
+ inst->alg.cra_aead.maxauthsize = auth->digestsize;
inst->alg.cra_ctxsize = sizeof(struct crypto_authenc_ctx);
@@ -453,13 +665,13 @@
inst->alg.cra_aead.givencrypt = crypto_authenc_givencrypt;
out:
- crypto_mod_put(auth);
+ crypto_mod_put(auth_base);
return inst;
err_drop_enc:
crypto_drop_skcipher(&ctx->enc);
err_drop_auth:
- crypto_drop_spawn(&ctx->auth);
+ crypto_drop_ahash(&ctx->auth);
err_free_inst:
kfree(inst);
out_put_auth:
@@ -472,7 +684,7 @@
struct authenc_instance_ctx *ctx = crypto_instance_ctx(inst);
crypto_drop_skcipher(&ctx->enc);
- crypto_drop_spawn(&ctx->auth);
+ crypto_drop_ahash(&ctx->auth);
kfree(inst);
}
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index ae5fa99..3533582 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -39,6 +39,11 @@
struct cryptd_queue *queue;
};
+struct hashd_instance_ctx {
+ struct crypto_shash_spawn spawn;
+ struct cryptd_queue *queue;
+};
+
struct cryptd_blkcipher_ctx {
struct crypto_blkcipher *child;
};
@@ -48,11 +53,12 @@
};
struct cryptd_hash_ctx {
- struct crypto_hash *child;
+ struct crypto_shash *child;
};
struct cryptd_hash_request_ctx {
crypto_completion_t complete;
+ struct shash_desc desc;
};
static void cryptd_queue_worker(struct work_struct *work);
@@ -249,32 +255,24 @@
crypto_free_blkcipher(ctx->child);
}
-static struct crypto_instance *cryptd_alloc_instance(struct crypto_alg *alg,
- struct cryptd_queue *queue)
+static void *cryptd_alloc_instance(struct crypto_alg *alg, unsigned int head,
+ unsigned int tail)
{
+ char *p;
struct crypto_instance *inst;
- struct cryptd_instance_ctx *ctx;
int err;
- inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
- if (!inst) {
- inst = ERR_PTR(-ENOMEM);
- goto out;
- }
+ p = kzalloc(head + sizeof(*inst) + tail, GFP_KERNEL);
+ if (!p)
+ return ERR_PTR(-ENOMEM);
+
+ inst = (void *)(p + head);
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
"cryptd(%s)", alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
goto out_free_inst;
- ctx = crypto_instance_ctx(inst);
- err = crypto_init_spawn(&ctx->spawn, alg, inst,
- CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC);
- if (err)
- goto out_free_inst;
-
- ctx->queue = queue;
-
memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME);
inst->alg.cra_priority = alg->cra_priority + 50;
@@ -282,29 +280,41 @@
inst->alg.cra_alignmask = alg->cra_alignmask;
out:
- return inst;
+ return p;
out_free_inst:
- kfree(inst);
- inst = ERR_PTR(err);
+ kfree(p);
+ p = ERR_PTR(err);
goto out;
}
-static struct crypto_instance *cryptd_alloc_blkcipher(
- struct rtattr **tb, struct cryptd_queue *queue)
+static int cryptd_create_blkcipher(struct crypto_template *tmpl,
+ struct rtattr **tb,
+ struct cryptd_queue *queue)
{
+ struct cryptd_instance_ctx *ctx;
struct crypto_instance *inst;
struct crypto_alg *alg;
+ int err;
alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_BLKCIPHER,
CRYPTO_ALG_TYPE_MASK);
if (IS_ERR(alg))
- return ERR_CAST(alg);
+ return PTR_ERR(alg);
- inst = cryptd_alloc_instance(alg, queue);
+ inst = cryptd_alloc_instance(alg, 0, sizeof(*ctx));
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
+ ctx = crypto_instance_ctx(inst);
+ ctx->queue = queue;
+
+ err = crypto_init_spawn(&ctx->spawn, alg, inst,
+ CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC);
+ if (err)
+ goto out_free_inst;
+
inst->alg.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC;
inst->alg.cra_type = &crypto_ablkcipher_type;
@@ -323,26 +333,34 @@
inst->alg.cra_ablkcipher.encrypt = cryptd_blkcipher_encrypt_enqueue;
inst->alg.cra_ablkcipher.decrypt = cryptd_blkcipher_decrypt_enqueue;
+ err = crypto_register_instance(tmpl, inst);
+ if (err) {
+ crypto_drop_spawn(&ctx->spawn);
+out_free_inst:
+ kfree(inst);
+ }
+
out_put_alg:
crypto_mod_put(alg);
- return inst;
+ return err;
}
static int cryptd_hash_init_tfm(struct crypto_tfm *tfm)
{
struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
- struct cryptd_instance_ctx *ictx = crypto_instance_ctx(inst);
- struct crypto_spawn *spawn = &ictx->spawn;
+ struct hashd_instance_ctx *ictx = crypto_instance_ctx(inst);
+ struct crypto_shash_spawn *spawn = &ictx->spawn;
struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm);
- struct crypto_hash *cipher;
+ struct crypto_shash *hash;
- cipher = crypto_spawn_hash(spawn);
- if (IS_ERR(cipher))
- return PTR_ERR(cipher);
+ hash = crypto_spawn_shash(spawn);
+ if (IS_ERR(hash))
+ return PTR_ERR(hash);
- ctx->child = cipher;
- tfm->crt_ahash.reqsize =
- sizeof(struct cryptd_hash_request_ctx);
+ ctx->child = hash;
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct cryptd_hash_request_ctx) +
+ crypto_shash_descsize(hash));
return 0;
}
@@ -350,22 +368,22 @@
{
struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm);
- crypto_free_hash(ctx->child);
+ crypto_free_shash(ctx->child);
}
static int cryptd_hash_setkey(struct crypto_ahash *parent,
const u8 *key, unsigned int keylen)
{
struct cryptd_hash_ctx *ctx = crypto_ahash_ctx(parent);
- struct crypto_hash *child = ctx->child;
+ struct crypto_shash *child = ctx->child;
int err;
- crypto_hash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
- crypto_hash_set_flags(child, crypto_ahash_get_flags(parent) &
- CRYPTO_TFM_REQ_MASK);
- err = crypto_hash_setkey(child, key, keylen);
- crypto_ahash_set_flags(parent, crypto_hash_get_flags(child) &
- CRYPTO_TFM_RES_MASK);
+ crypto_shash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_shash_set_flags(child, crypto_ahash_get_flags(parent) &
+ CRYPTO_TFM_REQ_MASK);
+ err = crypto_shash_setkey(child, key, keylen);
+ crypto_ahash_set_flags(parent, crypto_shash_get_flags(child) &
+ CRYPTO_TFM_RES_MASK);
return err;
}
@@ -385,21 +403,19 @@
static void cryptd_hash_init(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
- struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
-
- rctx = ahash_request_ctx(req);
+ struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
+ struct crypto_shash *child = ctx->child;
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+ struct shash_desc *desc = &rctx->desc;
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->tfm = child;
+ desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- err = crypto_hash_crt(child)->init(&desc);
+ err = crypto_shash_init(desc);
req->base.complete = rctx->complete;
@@ -416,23 +432,15 @@
static void cryptd_hash_update(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
+ struct ahash_request *req = ahash_request_cast(req_async);
struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
rctx = ahash_request_ctx(req);
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
-
- err = crypto_hash_crt(child)->update(&desc,
- req->src,
- req->nbytes);
+ err = shash_ahash_update(req, &rctx->desc);
req->base.complete = rctx->complete;
@@ -449,21 +457,13 @@
static void cryptd_hash_final(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
- struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
-
- rctx = ahash_request_ctx(req);
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
-
- err = crypto_hash_crt(child)->final(&desc, req->result);
+ err = crypto_shash_final(&rctx->desc, req->result);
req->base.complete = rctx->complete;
@@ -478,26 +478,44 @@
return cryptd_hash_enqueue(req, cryptd_hash_final);
}
-static void cryptd_hash_digest(struct crypto_async_request *req_async, int err)
+static void cryptd_hash_finup(struct crypto_async_request *req_async, int err)
{
- struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
- struct crypto_hash *child = ctx->child;
- struct ahash_request *req = ahash_request_cast(req_async);
- struct cryptd_hash_request_ctx *rctx;
- struct hash_desc desc;
-
- rctx = ahash_request_ctx(req);
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
if (unlikely(err == -EINPROGRESS))
goto out;
- desc.tfm = child;
- desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = shash_ahash_finup(req, &rctx->desc);
- err = crypto_hash_crt(child)->digest(&desc,
- req->src,
- req->nbytes,
- req->result);
+ req->base.complete = rctx->complete;
+
+out:
+ local_bh_disable();
+ rctx->complete(&req->base, err);
+ local_bh_enable();
+}
+
+static int cryptd_hash_finup_enqueue(struct ahash_request *req)
+{
+ return cryptd_hash_enqueue(req, cryptd_hash_finup);
+}
+
+static void cryptd_hash_digest(struct crypto_async_request *req_async, int err)
+{
+ struct cryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm);
+ struct crypto_shash *child = ctx->child;
+ struct ahash_request *req = ahash_request_cast(req_async);
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+ struct shash_desc *desc = &rctx->desc;
+
+ if (unlikely(err == -EINPROGRESS))
+ goto out;
+
+ desc->tfm = child;
+ desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ err = shash_ahash_digest(req, desc);
req->base.complete = rctx->complete;
@@ -512,64 +530,108 @@
return cryptd_hash_enqueue(req, cryptd_hash_digest);
}
-static struct crypto_instance *cryptd_alloc_hash(
- struct rtattr **tb, struct cryptd_queue *queue)
+static int cryptd_hash_export(struct ahash_request *req, void *out)
{
- struct crypto_instance *inst;
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+
+ return crypto_shash_export(&rctx->desc, out);
+}
+
+static int cryptd_hash_import(struct ahash_request *req, const void *in)
+{
+ struct cryptd_hash_request_ctx *rctx = ahash_request_ctx(req);
+
+ return crypto_shash_import(&rctx->desc, in);
+}
+
+static int cryptd_create_hash(struct crypto_template *tmpl, struct rtattr **tb,
+ struct cryptd_queue *queue)
+{
+ struct hashd_instance_ctx *ctx;
+ struct ahash_instance *inst;
+ struct shash_alg *salg;
struct crypto_alg *alg;
+ int err;
- alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_HASH,
- CRYPTO_ALG_TYPE_HASH_MASK);
- if (IS_ERR(alg))
- return ERR_PTR(PTR_ERR(alg));
+ salg = shash_attr_alg(tb[1], 0, 0);
+ if (IS_ERR(salg))
+ return PTR_ERR(salg);
- inst = cryptd_alloc_instance(alg, queue);
+ alg = &salg->base;
+ inst = cryptd_alloc_instance(alg, ahash_instance_headroom(),
+ sizeof(*ctx));
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
- inst->alg.cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC;
- inst->alg.cra_type = &crypto_ahash_type;
+ ctx = ahash_instance_ctx(inst);
+ ctx->queue = queue;
- inst->alg.cra_ahash.digestsize = alg->cra_hash.digestsize;
- inst->alg.cra_ctxsize = sizeof(struct cryptd_hash_ctx);
+ err = crypto_init_shash_spawn(&ctx->spawn, salg,
+ ahash_crypto_instance(inst));
+ if (err)
+ goto out_free_inst;
- inst->alg.cra_init = cryptd_hash_init_tfm;
- inst->alg.cra_exit = cryptd_hash_exit_tfm;
+ inst->alg.halg.base.cra_flags = CRYPTO_ALG_ASYNC;
- inst->alg.cra_ahash.init = cryptd_hash_init_enqueue;
- inst->alg.cra_ahash.update = cryptd_hash_update_enqueue;
- inst->alg.cra_ahash.final = cryptd_hash_final_enqueue;
- inst->alg.cra_ahash.setkey = cryptd_hash_setkey;
- inst->alg.cra_ahash.digest = cryptd_hash_digest_enqueue;
+ inst->alg.halg.digestsize = salg->digestsize;
+ inst->alg.halg.base.cra_ctxsize = sizeof(struct cryptd_hash_ctx);
+
+ inst->alg.halg.base.cra_init = cryptd_hash_init_tfm;
+ inst->alg.halg.base.cra_exit = cryptd_hash_exit_tfm;
+
+ inst->alg.init = cryptd_hash_init_enqueue;
+ inst->alg.update = cryptd_hash_update_enqueue;
+ inst->alg.final = cryptd_hash_final_enqueue;
+ inst->alg.finup = cryptd_hash_finup_enqueue;
+ inst->alg.export = cryptd_hash_export;
+ inst->alg.import = cryptd_hash_import;
+ inst->alg.setkey = cryptd_hash_setkey;
+ inst->alg.digest = cryptd_hash_digest_enqueue;
+
+ err = ahash_register_instance(tmpl, inst);
+ if (err) {
+ crypto_drop_shash(&ctx->spawn);
+out_free_inst:
+ kfree(inst);
+ }
out_put_alg:
crypto_mod_put(alg);
- return inst;
+ return err;
}
static struct cryptd_queue queue;
-static struct crypto_instance *cryptd_alloc(struct rtattr **tb)
+static int cryptd_create(struct crypto_template *tmpl, struct rtattr **tb)
{
struct crypto_attr_type *algt;
algt = crypto_get_attr_type(tb);
if (IS_ERR(algt))
- return ERR_CAST(algt);
+ return PTR_ERR(algt);
switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_BLKCIPHER:
- return cryptd_alloc_blkcipher(tb, &queue);
+ return cryptd_create_blkcipher(tmpl, tb, &queue);
case CRYPTO_ALG_TYPE_DIGEST:
- return cryptd_alloc_hash(tb, &queue);
+ return cryptd_create_hash(tmpl, tb, &queue);
}
- return ERR_PTR(-EINVAL);
+ return -EINVAL;
}
static void cryptd_free(struct crypto_instance *inst)
{
struct cryptd_instance_ctx *ctx = crypto_instance_ctx(inst);
+ struct hashd_instance_ctx *hctx = crypto_instance_ctx(inst);
+
+ switch (inst->alg.cra_flags & CRYPTO_ALG_TYPE_MASK) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_drop_shash(&hctx->spawn);
+ kfree(ahash_instance(inst));
+ return;
+ }
crypto_drop_spawn(&ctx->spawn);
kfree(inst);
@@ -577,7 +639,7 @@
static struct crypto_template cryptd_tmpl = {
.name = "cryptd",
- .alloc = cryptd_alloc,
+ .create = cryptd_create,
.free = cryptd_free,
.module = THIS_MODULE,
};
@@ -620,6 +682,41 @@
}
EXPORT_SYMBOL_GPL(cryptd_free_ablkcipher);
+struct cryptd_ahash *cryptd_alloc_ahash(const char *alg_name,
+ u32 type, u32 mask)
+{
+ char cryptd_alg_name[CRYPTO_MAX_ALG_NAME];
+ struct crypto_ahash *tfm;
+
+ if (snprintf(cryptd_alg_name, CRYPTO_MAX_ALG_NAME,
+ "cryptd(%s)", alg_name) >= CRYPTO_MAX_ALG_NAME)
+ return ERR_PTR(-EINVAL);
+ tfm = crypto_alloc_ahash(cryptd_alg_name, type, mask);
+ if (IS_ERR(tfm))
+ return ERR_CAST(tfm);
+ if (tfm->base.__crt_alg->cra_module != THIS_MODULE) {
+ crypto_free_ahash(tfm);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return __cryptd_ahash_cast(tfm);
+}
+EXPORT_SYMBOL_GPL(cryptd_alloc_ahash);
+
+struct crypto_shash *cryptd_ahash_child(struct cryptd_ahash *tfm)
+{
+ struct cryptd_hash_ctx *ctx = crypto_ahash_ctx(&tfm->base);
+
+ return ctx->child;
+}
+EXPORT_SYMBOL_GPL(cryptd_ahash_child);
+
+void cryptd_free_ahash(struct cryptd_ahash *tfm)
+{
+ crypto_free_ahash(&tfm->base);
+}
+EXPORT_SYMBOL_GPL(cryptd_free_ahash);
+
static int __init cryptd_init(void)
{
int err;
diff --git a/crypto/ctr.c b/crypto/ctr.c
index 2d7425f..6c3bfab 100644
--- a/crypto/ctr.c
+++ b/crypto/ctr.c
@@ -219,6 +219,8 @@
inst->alg.cra_blkcipher.encrypt = crypto_ctr_crypt;
inst->alg.cra_blkcipher.decrypt = crypto_ctr_crypt;
+ inst->alg.cra_blkcipher.geniv = "chainiv";
+
out:
crypto_mod_put(alg);
return inst;
diff --git a/crypto/gcm.c b/crypto/gcm.c
index e70afd0..5fc3292 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -11,7 +11,10 @@
#include <crypto/gf128mul.h>
#include <crypto/internal/aead.h>
#include <crypto/internal/skcipher.h>
+#include <crypto/internal/hash.h>
#include <crypto/scatterwalk.h>
+#include <crypto/hash.h>
+#include "internal.h"
#include <linux/completion.h>
#include <linux/err.h>
#include <linux/init.h>
@@ -21,11 +24,12 @@
struct gcm_instance_ctx {
struct crypto_skcipher_spawn ctr;
+ struct crypto_ahash_spawn ghash;
};
struct crypto_gcm_ctx {
struct crypto_ablkcipher *ctr;
- struct gf128mul_4k *gf128;
+ struct crypto_ahash *ghash;
};
struct crypto_rfc4106_ctx {
@@ -34,10 +38,9 @@
};
struct crypto_gcm_ghash_ctx {
- u32 bytes;
- u32 flags;
- struct gf128mul_4k *gf128;
- u8 buffer[16];
+ unsigned int cryptlen;
+ struct scatterlist *src;
+ crypto_completion_t complete;
};
struct crypto_gcm_req_priv_ctx {
@@ -45,8 +48,11 @@
u8 iauth_tag[16];
struct scatterlist src[2];
struct scatterlist dst[2];
- struct crypto_gcm_ghash_ctx ghash;
- struct ablkcipher_request abreq;
+ struct crypto_gcm_ghash_ctx ghash_ctx;
+ union {
+ struct ahash_request ahreq;
+ struct ablkcipher_request abreq;
+ } u;
};
struct crypto_gcm_setkey_result {
@@ -54,6 +60,8 @@
struct completion completion;
};
+static void *gcm_zeroes;
+
static inline struct crypto_gcm_req_priv_ctx *crypto_gcm_reqctx(
struct aead_request *req)
{
@@ -62,113 +70,6 @@
return (void *)PTR_ALIGN((u8 *)aead_request_ctx(req), align + 1);
}
-static void crypto_gcm_ghash_init(struct crypto_gcm_ghash_ctx *ctx, u32 flags,
- struct gf128mul_4k *gf128)
-{
- ctx->bytes = 0;
- ctx->flags = flags;
- ctx->gf128 = gf128;
- memset(ctx->buffer, 0, 16);
-}
-
-static void crypto_gcm_ghash_update(struct crypto_gcm_ghash_ctx *ctx,
- const u8 *src, unsigned int srclen)
-{
- u8 *dst = ctx->buffer;
-
- if (ctx->bytes) {
- int n = min(srclen, ctx->bytes);
- u8 *pos = dst + (16 - ctx->bytes);
-
- ctx->bytes -= n;
- srclen -= n;
-
- while (n--)
- *pos++ ^= *src++;
-
- if (!ctx->bytes)
- gf128mul_4k_lle((be128 *)dst, ctx->gf128);
- }
-
- while (srclen >= 16) {
- crypto_xor(dst, src, 16);
- gf128mul_4k_lle((be128 *)dst, ctx->gf128);
- src += 16;
- srclen -= 16;
- }
-
- if (srclen) {
- ctx->bytes = 16 - srclen;
- while (srclen--)
- *dst++ ^= *src++;
- }
-}
-
-static void crypto_gcm_ghash_update_sg(struct crypto_gcm_ghash_ctx *ctx,
- struct scatterlist *sg, int len)
-{
- struct scatter_walk walk;
- u8 *src;
- int n;
-
- if (!len)
- return;
-
- scatterwalk_start(&walk, sg);
-
- while (len) {
- n = scatterwalk_clamp(&walk, len);
-
- if (!n) {
- scatterwalk_start(&walk, scatterwalk_sg_next(walk.sg));
- n = scatterwalk_clamp(&walk, len);
- }
-
- src = scatterwalk_map(&walk, 0);
-
- crypto_gcm_ghash_update(ctx, src, n);
- len -= n;
-
- scatterwalk_unmap(src, 0);
- scatterwalk_advance(&walk, n);
- scatterwalk_done(&walk, 0, len);
- if (len)
- crypto_yield(ctx->flags);
- }
-}
-
-static void crypto_gcm_ghash_flush(struct crypto_gcm_ghash_ctx *ctx)
-{
- u8 *dst = ctx->buffer;
-
- if (ctx->bytes) {
- u8 *tmp = dst + (16 - ctx->bytes);
-
- while (ctx->bytes--)
- *tmp++ ^= 0;
-
- gf128mul_4k_lle((be128 *)dst, ctx->gf128);
- }
-
- ctx->bytes = 0;
-}
-
-static void crypto_gcm_ghash_final_xor(struct crypto_gcm_ghash_ctx *ctx,
- unsigned int authlen,
- unsigned int cryptlen, u8 *dst)
-{
- u8 *buf = ctx->buffer;
- u128 lengths;
-
- lengths.a = cpu_to_be64(authlen * 8);
- lengths.b = cpu_to_be64(cryptlen * 8);
-
- crypto_gcm_ghash_flush(ctx);
- crypto_xor(buf, (u8 *)&lengths, 16);
- gf128mul_4k_lle((be128 *)buf, ctx->gf128);
- crypto_xor(dst, buf, 16);
-}
-
static void crypto_gcm_setkey_done(struct crypto_async_request *req, int err)
{
struct crypto_gcm_setkey_result *result = req->data;
@@ -184,6 +85,7 @@
unsigned int keylen)
{
struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead);
+ struct crypto_ahash *ghash = ctx->ghash;
struct crypto_ablkcipher *ctr = ctx->ctr;
struct {
be128 hash;
@@ -233,13 +135,12 @@
if (err)
goto out;
- if (ctx->gf128 != NULL)
- gf128mul_free_4k(ctx->gf128);
-
- ctx->gf128 = gf128mul_init_4k_lle(&data->hash);
-
- if (ctx->gf128 == NULL)
- err = -ENOMEM;
+ crypto_ahash_clear_flags(ghash, CRYPTO_TFM_REQ_MASK);
+ crypto_ahash_set_flags(ghash, crypto_aead_get_flags(aead) &
+ CRYPTO_TFM_REQ_MASK);
+ err = crypto_ahash_setkey(ghash, (u8 *)&data->hash, sizeof(be128));
+ crypto_aead_set_flags(aead, crypto_ahash_get_flags(ghash) &
+ CRYPTO_TFM_RES_MASK);
out:
kfree(data);
@@ -272,8 +173,6 @@
struct crypto_aead *aead = crypto_aead_reqtfm(req);
struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead);
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- u32 flags = req->base.tfm->crt_flags;
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
struct scatterlist *dst;
__be32 counter = cpu_to_be32(1);
@@ -296,108 +195,398 @@
ablkcipher_request_set_crypt(ablk_req, pctx->src, dst,
cryptlen + sizeof(pctx->auth_tag),
req->iv);
-
- crypto_gcm_ghash_init(ghash, flags, ctx->gf128);
-
- crypto_gcm_ghash_update_sg(ghash, req->assoc, req->assoclen);
- crypto_gcm_ghash_flush(ghash);
}
-static int crypto_gcm_hash(struct aead_request *req)
+static inline unsigned int gcm_remain(unsigned int len)
{
- struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ len &= 0xfU;
+ return len ? 16 - len : 0;
+}
+
+static void gcm_hash_len_done(struct crypto_async_request *areq, int err);
+static void gcm_hash_final_done(struct crypto_async_request *areq, int err);
+
+static int gcm_hash_update(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx,
+ crypto_completion_t complete,
+ struct scatterlist *src,
+ unsigned int len)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ complete, req);
+ ahash_request_set_crypt(ahreq, src, NULL, len);
+
+ return crypto_ahash_update(ahreq);
+}
+
+static int gcm_hash_remain(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx,
+ unsigned int remain,
+ crypto_completion_t complete)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ complete, req);
+ sg_init_one(pctx->src, gcm_zeroes, remain);
+ ahash_request_set_crypt(ahreq, pctx->src, NULL, remain);
+
+ return crypto_ahash_update(ahreq);
+}
+
+static int gcm_hash_len(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ u128 lengths;
+
+ lengths.a = cpu_to_be64(req->assoclen * 8);
+ lengths.b = cpu_to_be64(gctx->cryptlen * 8);
+ memcpy(pctx->iauth_tag, &lengths, 16);
+ sg_init_one(pctx->src, pctx->iauth_tag, 16);
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ gcm_hash_len_done, req);
+ ahash_request_set_crypt(ahreq, pctx->src,
+ NULL, sizeof(lengths));
+
+ return crypto_ahash_update(ahreq);
+}
+
+static int gcm_hash_final(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ gcm_hash_final_done, req);
+ ahash_request_set_crypt(ahreq, NULL, pctx->iauth_tag, 0);
+
+ return crypto_ahash_final(ahreq);
+}
+
+static void gcm_hash_final_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- u8 *auth_tag = pctx->auth_tag;
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
- crypto_gcm_ghash_update_sg(ghash, req->dst, req->cryptlen);
- crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen,
- auth_tag);
+ if (!err)
+ crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
- scatterwalk_map_and_copy(auth_tag, req->dst, req->cryptlen,
- crypto_aead_authsize(aead), 1);
+ gctx->complete(areq, err);
+}
+
+static void gcm_hash_len_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+
+ if (!err) {
+ err = gcm_hash_final(req, pctx);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_final_done(areq, err);
+}
+
+static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+
+ if (!err) {
+ err = gcm_hash_len(req, pctx);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_len_done(areq, err);
+}
+
+static void gcm_hash_crypt_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ unsigned int remain;
+
+ if (!err) {
+ remain = gcm_remain(gctx->cryptlen);
+ BUG_ON(!remain);
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_crypt_remain_done);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_crypt_remain_done(areq, err);
+}
+
+static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ crypto_completion_t complete;
+ unsigned int remain = 0;
+
+ if (!err && gctx->cryptlen) {
+ remain = gcm_remain(gctx->cryptlen);
+ complete = remain ? gcm_hash_crypt_done :
+ gcm_hash_crypt_remain_done;
+ err = gcm_hash_update(req, pctx, complete,
+ gctx->src, gctx->cryptlen);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ if (remain)
+ gcm_hash_crypt_done(areq, err);
+ else
+ gcm_hash_crypt_remain_done(areq, err);
+}
+
+static void gcm_hash_assoc_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ unsigned int remain;
+
+ if (!err) {
+ remain = gcm_remain(req->assoclen);
+ BUG_ON(!remain);
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_assoc_remain_done);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_hash_assoc_remain_done(areq, err);
+}
+
+static void gcm_hash_init_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ crypto_completion_t complete;
+ unsigned int remain = 0;
+
+ if (!err && req->assoclen) {
+ remain = gcm_remain(req->assoclen);
+ complete = remain ? gcm_hash_assoc_done :
+ gcm_hash_assoc_remain_done;
+ err = gcm_hash_update(req, pctx, complete,
+ req->assoc, req->assoclen);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ if (remain)
+ gcm_hash_assoc_done(areq, err);
+ else
+ gcm_hash_assoc_remain_done(areq, err);
+}
+
+static int gcm_hash(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct ahash_request *ahreq = &pctx->u.ahreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+ struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ unsigned int remain;
+ crypto_completion_t complete;
+ int err;
+
+ ahash_request_set_tfm(ahreq, ctx->ghash);
+
+ ahash_request_set_callback(ahreq, aead_request_flags(req),
+ gcm_hash_init_done, req);
+ err = crypto_ahash_init(ahreq);
+ if (err)
+ return err;
+ remain = gcm_remain(req->assoclen);
+ complete = remain ? gcm_hash_assoc_done : gcm_hash_assoc_remain_done;
+ err = gcm_hash_update(req, pctx, complete, req->assoc, req->assoclen);
+ if (err)
+ return err;
+ if (remain) {
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_assoc_remain_done);
+ if (err)
+ return err;
+ }
+ remain = gcm_remain(gctx->cryptlen);
+ complete = remain ? gcm_hash_crypt_done : gcm_hash_crypt_remain_done;
+ err = gcm_hash_update(req, pctx, complete, gctx->src, gctx->cryptlen);
+ if (err)
+ return err;
+ if (remain) {
+ err = gcm_hash_remain(req, pctx, remain,
+ gcm_hash_crypt_remain_done);
+ if (err)
+ return err;
+ }
+ err = gcm_hash_len(req, pctx);
+ if (err)
+ return err;
+ err = gcm_hash_final(req, pctx);
+ if (err)
+ return err;
+
return 0;
}
-static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err)
+static void gcm_enc_copy_hash(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
+{
+ struct crypto_aead *aead = crypto_aead_reqtfm(req);
+ u8 *auth_tag = pctx->auth_tag;
+
+ scatterwalk_map_and_copy(auth_tag, req->dst, req->cryptlen,
+ crypto_aead_authsize(aead), 1);
+}
+
+static void gcm_enc_hash_done(struct crypto_async_request *areq,
+ int err)
{
struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err)
- err = crypto_gcm_hash(req);
+ gcm_enc_copy_hash(req, pctx);
aead_request_complete(req, err);
}
+static void gcm_encrypt_done(struct crypto_async_request *areq,
+ int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+
+ if (!err) {
+ err = gcm_hash(req, pctx);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_enc_hash_done(areq, err);
+}
+
static int crypto_gcm_encrypt(struct aead_request *req)
{
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- struct ablkcipher_request *abreq = &pctx->abreq;
+ struct ablkcipher_request *abreq = &pctx->u.abreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
int err;
crypto_gcm_init_crypt(abreq, req, req->cryptlen);
ablkcipher_request_set_callback(abreq, aead_request_flags(req),
- crypto_gcm_encrypt_done, req);
+ gcm_encrypt_done, req);
+
+ gctx->src = req->dst;
+ gctx->cryptlen = req->cryptlen;
+ gctx->complete = gcm_enc_hash_done;
err = crypto_ablkcipher_encrypt(abreq);
if (err)
return err;
- return crypto_gcm_hash(req);
+ err = gcm_hash(req, pctx);
+ if (err)
+ return err;
+
+ crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
+ gcm_enc_copy_hash(req, pctx);
+
+ return 0;
}
-static int crypto_gcm_verify(struct aead_request *req)
+static int crypto_gcm_verify(struct aead_request *req,
+ struct crypto_gcm_req_priv_ctx *pctx)
{
struct crypto_aead *aead = crypto_aead_reqtfm(req);
- struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
u8 *auth_tag = pctx->auth_tag;
u8 *iauth_tag = pctx->iauth_tag;
unsigned int authsize = crypto_aead_authsize(aead);
unsigned int cryptlen = req->cryptlen - authsize;
- crypto_gcm_ghash_final_xor(ghash, req->assoclen, cryptlen, auth_tag);
-
- authsize = crypto_aead_authsize(aead);
+ crypto_xor(auth_tag, iauth_tag, 16);
scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0);
return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
}
-static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err)
+static void gcm_decrypt_done(struct crypto_async_request *areq, int err)
{
struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
if (!err)
- err = crypto_gcm_verify(req);
+ err = crypto_gcm_verify(req, pctx);
aead_request_complete(req, err);
}
+static void gcm_dec_hash_done(struct crypto_async_request *areq, int err)
+{
+ struct aead_request *req = areq->data;
+ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
+ struct ablkcipher_request *abreq = &pctx->u.abreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
+
+ if (!err) {
+ ablkcipher_request_set_callback(abreq, aead_request_flags(req),
+ gcm_decrypt_done, req);
+ crypto_gcm_init_crypt(abreq, req, gctx->cryptlen);
+ err = crypto_ablkcipher_decrypt(abreq);
+ if (err == -EINPROGRESS || err == -EBUSY)
+ return;
+ }
+
+ gcm_decrypt_done(areq, err);
+}
+
static int crypto_gcm_decrypt(struct aead_request *req)
{
struct crypto_aead *aead = crypto_aead_reqtfm(req);
struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
- struct ablkcipher_request *abreq = &pctx->abreq;
- struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash;
- unsigned int cryptlen = req->cryptlen;
+ struct ablkcipher_request *abreq = &pctx->u.abreq;
+ struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
unsigned int authsize = crypto_aead_authsize(aead);
+ unsigned int cryptlen = req->cryptlen;
int err;
if (cryptlen < authsize)
return -EINVAL;
cryptlen -= authsize;
- crypto_gcm_init_crypt(abreq, req, cryptlen);
+ gctx->src = req->src;
+ gctx->cryptlen = cryptlen;
+ gctx->complete = gcm_dec_hash_done;
+
+ err = gcm_hash(req, pctx);
+ if (err)
+ return err;
+
ablkcipher_request_set_callback(abreq, aead_request_flags(req),
- crypto_gcm_decrypt_done, req);
-
- crypto_gcm_ghash_update_sg(ghash, req->src, cryptlen);
-
+ gcm_decrypt_done, req);
+ crypto_gcm_init_crypt(abreq, req, cryptlen);
err = crypto_ablkcipher_decrypt(abreq);
if (err)
return err;
- return crypto_gcm_verify(req);
+ return crypto_gcm_verify(req, pctx);
}
static int crypto_gcm_init_tfm(struct crypto_tfm *tfm)
@@ -406,43 +595,56 @@
struct gcm_instance_ctx *ictx = crypto_instance_ctx(inst);
struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(tfm);
struct crypto_ablkcipher *ctr;
+ struct crypto_ahash *ghash;
unsigned long align;
int err;
+ ghash = crypto_spawn_ahash(&ictx->ghash);
+ if (IS_ERR(ghash))
+ return PTR_ERR(ghash);
+
ctr = crypto_spawn_skcipher(&ictx->ctr);
err = PTR_ERR(ctr);
if (IS_ERR(ctr))
- return err;
+ goto err_free_hash;
ctx->ctr = ctr;
- ctx->gf128 = NULL;
+ ctx->ghash = ghash;
align = crypto_tfm_alg_alignmask(tfm);
align &= ~(crypto_tfm_ctx_alignment() - 1);
tfm->crt_aead.reqsize = align +
- sizeof(struct crypto_gcm_req_priv_ctx) +
- crypto_ablkcipher_reqsize(ctr);
+ offsetof(struct crypto_gcm_req_priv_ctx, u) +
+ max(sizeof(struct ablkcipher_request) +
+ crypto_ablkcipher_reqsize(ctr),
+ sizeof(struct ahash_request) +
+ crypto_ahash_reqsize(ghash));
return 0;
+
+err_free_hash:
+ crypto_free_ahash(ghash);
+ return err;
}
static void crypto_gcm_exit_tfm(struct crypto_tfm *tfm)
{
struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(tfm);
- if (ctx->gf128 != NULL)
- gf128mul_free_4k(ctx->gf128);
-
+ crypto_free_ahash(ctx->ghash);
crypto_free_ablkcipher(ctx->ctr);
}
static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb,
const char *full_name,
- const char *ctr_name)
+ const char *ctr_name,
+ const char *ghash_name)
{
struct crypto_attr_type *algt;
struct crypto_instance *inst;
struct crypto_alg *ctr;
+ struct crypto_alg *ghash_alg;
+ struct ahash_alg *ghash_ahash_alg;
struct gcm_instance_ctx *ctx;
int err;
@@ -454,17 +656,31 @@
if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
return ERR_PTR(-EINVAL);
+ ghash_alg = crypto_find_alg(ghash_name, &crypto_ahash_type,
+ CRYPTO_ALG_TYPE_HASH,
+ CRYPTO_ALG_TYPE_AHASH_MASK);
+ err = PTR_ERR(ghash_alg);
+ if (IS_ERR(ghash_alg))
+ return ERR_PTR(err);
+
+ err = -ENOMEM;
inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
if (!inst)
- return ERR_PTR(-ENOMEM);
+ goto out_put_ghash;
ctx = crypto_instance_ctx(inst);
+ ghash_ahash_alg = container_of(ghash_alg, struct ahash_alg, halg.base);
+ err = crypto_init_ahash_spawn(&ctx->ghash, &ghash_ahash_alg->halg,
+ inst);
+ if (err)
+ goto err_free_inst;
+
crypto_set_skcipher_spawn(&ctx->ctr, inst);
err = crypto_grab_skcipher(&ctx->ctr, ctr_name, 0,
crypto_requires_sync(algt->type,
algt->mask));
if (err)
- goto err_free_inst;
+ goto err_drop_ghash;
ctr = crypto_skcipher_spawn_alg(&ctx->ctr);
@@ -479,7 +695,8 @@
err = -ENAMETOOLONG;
if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
- "gcm_base(%s)", ctr->cra_driver_name) >=
+ "gcm_base(%s,%s)", ctr->cra_driver_name,
+ ghash_alg->cra_driver_name) >=
CRYPTO_MAX_ALG_NAME)
goto out_put_ctr;
@@ -502,12 +719,16 @@
inst->alg.cra_aead.decrypt = crypto_gcm_decrypt;
out:
+ crypto_mod_put(ghash_alg);
return inst;
out_put_ctr:
crypto_drop_skcipher(&ctx->ctr);
+err_drop_ghash:
+ crypto_drop_ahash(&ctx->ghash);
err_free_inst:
kfree(inst);
+out_put_ghash:
inst = ERR_PTR(err);
goto out;
}
@@ -532,7 +753,7 @@
CRYPTO_MAX_ALG_NAME)
return ERR_PTR(-ENAMETOOLONG);
- return crypto_gcm_alloc_common(tb, full_name, ctr_name);
+ return crypto_gcm_alloc_common(tb, full_name, ctr_name, "ghash");
}
static void crypto_gcm_free(struct crypto_instance *inst)
@@ -540,6 +761,7 @@
struct gcm_instance_ctx *ctx = crypto_instance_ctx(inst);
crypto_drop_skcipher(&ctx->ctr);
+ crypto_drop_ahash(&ctx->ghash);
kfree(inst);
}
@@ -554,6 +776,7 @@
{
int err;
const char *ctr_name;
+ const char *ghash_name;
char full_name[CRYPTO_MAX_ALG_NAME];
ctr_name = crypto_attr_alg_name(tb[1]);
@@ -561,11 +784,16 @@
if (IS_ERR(ctr_name))
return ERR_PTR(err);
- if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s)",
- ctr_name) >= CRYPTO_MAX_ALG_NAME)
+ ghash_name = crypto_attr_alg_name(tb[2]);
+ err = PTR_ERR(ghash_name);
+ if (IS_ERR(ghash_name))
+ return ERR_PTR(err);
+
+ if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s,%s)",
+ ctr_name, ghash_name) >= CRYPTO_MAX_ALG_NAME)
return ERR_PTR(-ENAMETOOLONG);
- return crypto_gcm_alloc_common(tb, full_name, ctr_name);
+ return crypto_gcm_alloc_common(tb, full_name, ctr_name, ghash_name);
}
static struct crypto_template crypto_gcm_base_tmpl = {
@@ -784,6 +1012,10 @@
{
int err;
+ gcm_zeroes = kzalloc(16, GFP_KERNEL);
+ if (!gcm_zeroes)
+ return -ENOMEM;
+
err = crypto_register_template(&crypto_gcm_base_tmpl);
if (err)
goto out;
@@ -796,18 +1028,20 @@
if (err)
goto out_undo_gcm;
-out:
- return err;
+ return 0;
out_undo_gcm:
crypto_unregister_template(&crypto_gcm_tmpl);
out_undo_base:
crypto_unregister_template(&crypto_gcm_base_tmpl);
- goto out;
+out:
+ kfree(gcm_zeroes);
+ return err;
}
static void __exit crypto_gcm_module_exit(void)
{
+ kfree(gcm_zeroes);
crypto_unregister_template(&crypto_rfc4106_tmpl);
crypto_unregister_template(&crypto_gcm_tmpl);
crypto_unregister_template(&crypto_gcm_base_tmpl);
diff --git a/crypto/ghash-generic.c b/crypto/ghash-generic.c
new file mode 100644
index 0000000..be44256
--- /dev/null
+++ b/crypto/ghash-generic.c
@@ -0,0 +1,170 @@
+/*
+ * GHASH: digest algorithm for GCM (Galois/Counter Mode).
+ *
+ * Copyright (c) 2007 Nokia Siemens Networks - Mikko Herranen <mh1@iki.fi>
+ * Copyright (c) 2009 Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * The algorithm implementation is copied from gcm.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/gf128mul.h>
+#include <crypto/internal/hash.h>
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define GHASH_BLOCK_SIZE 16
+#define GHASH_DIGEST_SIZE 16
+
+struct ghash_ctx {
+ struct gf128mul_4k *gf128;
+};
+
+struct ghash_desc_ctx {
+ u8 buffer[GHASH_BLOCK_SIZE];
+ u32 bytes;
+};
+
+static int ghash_init(struct shash_desc *desc)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+
+ memset(dctx, 0, sizeof(*dctx));
+
+ return 0;
+}
+
+static int ghash_setkey(struct crypto_shash *tfm,
+ const u8 *key, unsigned int keylen)
+{
+ struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+
+ if (keylen != GHASH_BLOCK_SIZE) {
+ crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ if (ctx->gf128)
+ gf128mul_free_4k(ctx->gf128);
+ ctx->gf128 = gf128mul_init_4k_lle((be128 *)key);
+ if (!ctx->gf128)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int ghash_update(struct shash_desc *desc,
+ const u8 *src, unsigned int srclen)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+ u8 *dst = dctx->buffer;
+
+ if (dctx->bytes) {
+ int n = min(srclen, dctx->bytes);
+ u8 *pos = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+ dctx->bytes -= n;
+ srclen -= n;
+
+ while (n--)
+ *pos++ ^= *src++;
+
+ if (!dctx->bytes)
+ gf128mul_4k_lle((be128 *)dst, ctx->gf128);
+ }
+
+ while (srclen >= GHASH_BLOCK_SIZE) {
+ crypto_xor(dst, src, GHASH_BLOCK_SIZE);
+ gf128mul_4k_lle((be128 *)dst, ctx->gf128);
+ src += GHASH_BLOCK_SIZE;
+ srclen -= GHASH_BLOCK_SIZE;
+ }
+
+ if (srclen) {
+ dctx->bytes = GHASH_BLOCK_SIZE - srclen;
+ while (srclen--)
+ *dst++ ^= *src++;
+ }
+
+ return 0;
+}
+
+static void ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
+{
+ u8 *dst = dctx->buffer;
+
+ if (dctx->bytes) {
+ u8 *tmp = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+ while (dctx->bytes--)
+ *tmp++ ^= 0;
+
+ gf128mul_4k_lle((be128 *)dst, ctx->gf128);
+ }
+
+ dctx->bytes = 0;
+}
+
+static int ghash_final(struct shash_desc *desc, u8 *dst)
+{
+ struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+ u8 *buf = dctx->buffer;
+
+ ghash_flush(ctx, dctx);
+ memcpy(dst, buf, GHASH_BLOCK_SIZE);
+
+ return 0;
+}
+
+static void ghash_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct ghash_ctx *ctx = crypto_tfm_ctx(tfm);
+ if (ctx->gf128)
+ gf128mul_free_4k(ctx->gf128);
+}
+
+static struct shash_alg ghash_alg = {
+ .digestsize = GHASH_DIGEST_SIZE,
+ .init = ghash_init,
+ .update = ghash_update,
+ .final = ghash_final,
+ .setkey = ghash_setkey,
+ .descsize = sizeof(struct ghash_desc_ctx),
+ .base = {
+ .cra_name = "ghash",
+ .cra_driver_name = "ghash-generic",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = GHASH_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ghash_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ghash_alg.base.cra_list),
+ .cra_exit = ghash_exit_tfm,
+ },
+};
+
+static int __init ghash_mod_init(void)
+{
+ return crypto_register_shash(&ghash_alg);
+}
+
+static void __exit ghash_mod_exit(void)
+{
+ crypto_unregister_shash(&ghash_alg);
+}
+
+module_init(ghash_mod_init);
+module_exit(ghash_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
+MODULE_ALIAS("ghash");
diff --git a/crypto/hmac.c b/crypto/hmac.c
index 0ad39c3..15c2eb5 100644
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -27,7 +27,7 @@
#include <linux/string.h>
struct hmac_ctx {
- struct crypto_hash *child;
+ struct crypto_shash *hash;
};
static inline void *align_ptr(void *p, unsigned int align)
@@ -35,65 +35,45 @@
return (void *)ALIGN((unsigned long)p, align);
}
-static inline struct hmac_ctx *hmac_ctx(struct crypto_hash *tfm)
+static inline struct hmac_ctx *hmac_ctx(struct crypto_shash *tfm)
{
- return align_ptr(crypto_hash_ctx_aligned(tfm) +
- crypto_hash_blocksize(tfm) * 2 +
- crypto_hash_digestsize(tfm), sizeof(void *));
+ return align_ptr(crypto_shash_ctx_aligned(tfm) +
+ crypto_shash_statesize(tfm) * 2,
+ crypto_tfm_ctx_alignment());
}
-static int hmac_setkey(struct crypto_hash *parent,
+static int hmac_setkey(struct crypto_shash *parent,
const u8 *inkey, unsigned int keylen)
{
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *ipad = crypto_hash_ctx_aligned(parent);
- char *opad = ipad + bs;
- char *digest = opad + bs;
- struct hmac_ctx *ctx = align_ptr(digest + ds, sizeof(void *));
- struct crypto_hash *tfm = ctx->child;
+ int bs = crypto_shash_blocksize(parent);
+ int ds = crypto_shash_digestsize(parent);
+ int ss = crypto_shash_statesize(parent);
+ char *ipad = crypto_shash_ctx_aligned(parent);
+ char *opad = ipad + ss;
+ struct hmac_ctx *ctx = align_ptr(opad + ss,
+ crypto_tfm_ctx_alignment());
+ struct crypto_shash *hash = ctx->hash;
+ struct {
+ struct shash_desc shash;
+ char ctx[crypto_shash_descsize(hash)];
+ } desc;
unsigned int i;
+ desc.shash.tfm = hash;
+ desc.shash.flags = crypto_shash_get_flags(parent) &
+ CRYPTO_TFM_REQ_MAY_SLEEP;
+
if (keylen > bs) {
- struct hash_desc desc;
- struct scatterlist tmp;
- int tmplen;
int err;
- desc.tfm = tfm;
- desc.flags = crypto_hash_get_flags(parent);
- desc.flags &= CRYPTO_TFM_REQ_MAY_SLEEP;
-
- err = crypto_hash_init(&desc);
+ err = crypto_shash_digest(&desc.shash, inkey, keylen, ipad);
if (err)
return err;
- tmplen = bs * 2 + ds;
- sg_init_one(&tmp, ipad, tmplen);
-
- for (; keylen > tmplen; inkey += tmplen, keylen -= tmplen) {
- memcpy(ipad, inkey, tmplen);
- err = crypto_hash_update(&desc, &tmp, tmplen);
- if (err)
- return err;
- }
-
- if (keylen) {
- memcpy(ipad, inkey, keylen);
- err = crypto_hash_update(&desc, &tmp, keylen);
- if (err)
- return err;
- }
-
- err = crypto_hash_final(&desc, digest);
- if (err)
- return err;
-
- inkey = digest;
keylen = ds;
- }
+ } else
+ memcpy(ipad, inkey, keylen);
- memcpy(ipad, inkey, keylen);
memset(ipad + keylen, 0, bs - keylen);
memcpy(opad, ipad, bs);
@@ -102,184 +82,178 @@
opad[i] ^= 0x5c;
}
- return 0;
+ return crypto_shash_init(&desc.shash) ?:
+ crypto_shash_update(&desc.shash, ipad, bs) ?:
+ crypto_shash_export(&desc.shash, ipad) ?:
+ crypto_shash_init(&desc.shash) ?:
+ crypto_shash_update(&desc.shash, opad, bs) ?:
+ crypto_shash_export(&desc.shash, opad);
}
-static int hmac_init(struct hash_desc *pdesc)
+static int hmac_export(struct shash_desc *pdesc, void *out)
{
- struct crypto_hash *parent = pdesc->tfm;
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *ipad = crypto_hash_ctx_aligned(parent);
- struct hmac_ctx *ctx = align_ptr(ipad + bs * 2 + ds, sizeof(void *));
- struct hash_desc desc;
- struct scatterlist tmp;
- int err;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_one(&tmp, ipad, bs);
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- err = crypto_hash_init(&desc);
- if (unlikely(err))
- return err;
-
- return crypto_hash_update(&desc, &tmp, bs);
+ return crypto_shash_export(desc, out);
}
-static int hmac_update(struct hash_desc *pdesc,
- struct scatterlist *sg, unsigned int nbytes)
+static int hmac_import(struct shash_desc *pdesc, const void *in)
{
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
struct hmac_ctx *ctx = hmac_ctx(pdesc->tfm);
- struct hash_desc desc;
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->tfm = ctx->hash;
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- return crypto_hash_update(&desc, sg, nbytes);
+ return crypto_shash_import(desc, in);
}
-static int hmac_final(struct hash_desc *pdesc, u8 *out)
+static int hmac_init(struct shash_desc *pdesc)
{
- struct crypto_hash *parent = pdesc->tfm;
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *opad = crypto_hash_ctx_aligned(parent) + bs;
- char *digest = opad + bs;
- struct hmac_ctx *ctx = align_ptr(digest + ds, sizeof(void *));
- struct hash_desc desc;
- struct scatterlist tmp;
- int err;
-
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_one(&tmp, opad, bs + ds);
-
- err = crypto_hash_final(&desc, digest);
- if (unlikely(err))
- return err;
-
- return crypto_hash_digest(&desc, &tmp, bs + ds, out);
+ return hmac_import(pdesc, crypto_shash_ctx_aligned(pdesc->tfm));
}
-static int hmac_digest(struct hash_desc *pdesc, struct scatterlist *sg,
- unsigned int nbytes, u8 *out)
+static int hmac_update(struct shash_desc *pdesc,
+ const u8 *data, unsigned int nbytes)
{
- struct crypto_hash *parent = pdesc->tfm;
- int bs = crypto_hash_blocksize(parent);
- int ds = crypto_hash_digestsize(parent);
- char *ipad = crypto_hash_ctx_aligned(parent);
- char *opad = ipad + bs;
- char *digest = opad + bs;
- struct hmac_ctx *ctx = align_ptr(digest + ds, sizeof(void *));
- struct hash_desc desc;
- struct scatterlist sg1[2];
- struct scatterlist sg2[1];
- int err;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- desc.tfm = ctx->child;
- desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_init_table(sg1, 2);
- sg_set_buf(sg1, ipad, bs);
- scatterwalk_sg_chain(sg1, 2, sg);
+ return crypto_shash_update(desc, data, nbytes);
+}
- sg_init_table(sg2, 1);
- sg_set_buf(sg2, opad, bs + ds);
+static int hmac_final(struct shash_desc *pdesc, u8 *out)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ int ds = crypto_shash_digestsize(parent);
+ int ss = crypto_shash_statesize(parent);
+ char *opad = crypto_shash_ctx_aligned(parent) + ss;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
- err = crypto_hash_digest(&desc, sg1, nbytes + bs, digest);
- if (unlikely(err))
- return err;
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- return crypto_hash_digest(&desc, sg2, bs + ds, out);
+ return crypto_shash_final(desc, out) ?:
+ crypto_shash_import(desc, opad) ?:
+ crypto_shash_finup(desc, out, ds, out);
+}
+
+static int hmac_finup(struct shash_desc *pdesc, const u8 *data,
+ unsigned int nbytes, u8 *out)
+{
+
+ struct crypto_shash *parent = pdesc->tfm;
+ int ds = crypto_shash_digestsize(parent);
+ int ss = crypto_shash_statesize(parent);
+ char *opad = crypto_shash_ctx_aligned(parent) + ss;
+ struct shash_desc *desc = shash_desc_ctx(pdesc);
+
+ desc->flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ return crypto_shash_finup(desc, data, nbytes, out) ?:
+ crypto_shash_import(desc, opad) ?:
+ crypto_shash_finup(desc, out, ds, out);
}
static int hmac_init_tfm(struct crypto_tfm *tfm)
{
- struct crypto_hash *hash;
+ struct crypto_shash *parent = __crypto_shash_cast(tfm);
+ struct crypto_shash *hash;
struct crypto_instance *inst = (void *)tfm->__crt_alg;
- struct crypto_spawn *spawn = crypto_instance_ctx(inst);
- struct hmac_ctx *ctx = hmac_ctx(__crypto_hash_cast(tfm));
+ struct crypto_shash_spawn *spawn = crypto_instance_ctx(inst);
+ struct hmac_ctx *ctx = hmac_ctx(parent);
- hash = crypto_spawn_hash(spawn);
+ hash = crypto_spawn_shash(spawn);
if (IS_ERR(hash))
return PTR_ERR(hash);
- ctx->child = hash;
+ parent->descsize = sizeof(struct shash_desc) +
+ crypto_shash_descsize(hash);
+
+ ctx->hash = hash;
return 0;
}
static void hmac_exit_tfm(struct crypto_tfm *tfm)
{
- struct hmac_ctx *ctx = hmac_ctx(__crypto_hash_cast(tfm));
- crypto_free_hash(ctx->child);
+ struct hmac_ctx *ctx = hmac_ctx(__crypto_shash_cast(tfm));
+ crypto_free_shash(ctx->hash);
}
-static void hmac_free(struct crypto_instance *inst)
+static int hmac_create(struct crypto_template *tmpl, struct rtattr **tb)
{
- crypto_drop_spawn(crypto_instance_ctx(inst));
- kfree(inst);
-}
-
-static struct crypto_instance *hmac_alloc(struct rtattr **tb)
-{
- struct crypto_instance *inst;
+ struct shash_instance *inst;
struct crypto_alg *alg;
+ struct shash_alg *salg;
int err;
int ds;
+ int ss;
- err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_HASH);
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_SHASH);
if (err)
- return ERR_PTR(err);
+ return err;
- alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_HASH,
- CRYPTO_ALG_TYPE_HASH_MASK);
- if (IS_ERR(alg))
- return ERR_CAST(alg);
+ salg = shash_attr_alg(tb[1], 0, 0);
+ if (IS_ERR(salg))
+ return PTR_ERR(salg);
- inst = ERR_PTR(-EINVAL);
- ds = alg->cra_type == &crypto_hash_type ?
- alg->cra_hash.digestsize :
- alg->cra_type ?
- __crypto_shash_alg(alg)->digestsize :
- alg->cra_digest.dia_digestsize;
- if (ds > alg->cra_blocksize)
+ err = -EINVAL;
+ ds = salg->digestsize;
+ ss = salg->statesize;
+ alg = &salg->base;
+ if (ds > alg->cra_blocksize ||
+ ss < alg->cra_blocksize)
goto out_put_alg;
- inst = crypto_alloc_instance("hmac", alg);
+ inst = shash_alloc_instance("hmac", alg);
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
- inst->alg.cra_flags = CRYPTO_ALG_TYPE_HASH;
- inst->alg.cra_priority = alg->cra_priority;
- inst->alg.cra_blocksize = alg->cra_blocksize;
- inst->alg.cra_alignmask = alg->cra_alignmask;
- inst->alg.cra_type = &crypto_hash_type;
+ err = crypto_init_shash_spawn(shash_instance_ctx(inst), salg,
+ shash_crypto_instance(inst));
+ if (err)
+ goto out_free_inst;
- inst->alg.cra_hash.digestsize = ds;
+ inst->alg.base.cra_priority = alg->cra_priority;
+ inst->alg.base.cra_blocksize = alg->cra_blocksize;
+ inst->alg.base.cra_alignmask = alg->cra_alignmask;
- inst->alg.cra_ctxsize = sizeof(struct hmac_ctx) +
- ALIGN(inst->alg.cra_blocksize * 2 + ds,
- sizeof(void *));
+ ss = ALIGN(ss, alg->cra_alignmask + 1);
+ inst->alg.digestsize = ds;
+ inst->alg.statesize = ss;
- inst->alg.cra_init = hmac_init_tfm;
- inst->alg.cra_exit = hmac_exit_tfm;
+ inst->alg.base.cra_ctxsize = sizeof(struct hmac_ctx) +
+ ALIGN(ss * 2, crypto_tfm_ctx_alignment());
- inst->alg.cra_hash.init = hmac_init;
- inst->alg.cra_hash.update = hmac_update;
- inst->alg.cra_hash.final = hmac_final;
- inst->alg.cra_hash.digest = hmac_digest;
- inst->alg.cra_hash.setkey = hmac_setkey;
+ inst->alg.base.cra_init = hmac_init_tfm;
+ inst->alg.base.cra_exit = hmac_exit_tfm;
+
+ inst->alg.init = hmac_init;
+ inst->alg.update = hmac_update;
+ inst->alg.final = hmac_final;
+ inst->alg.finup = hmac_finup;
+ inst->alg.export = hmac_export;
+ inst->alg.import = hmac_import;
+ inst->alg.setkey = hmac_setkey;
+
+ err = shash_register_instance(tmpl, inst);
+ if (err) {
+out_free_inst:
+ shash_free_instance(shash_crypto_instance(inst));
+ }
out_put_alg:
crypto_mod_put(alg);
- return inst;
+ return err;
}
static struct crypto_template hmac_tmpl = {
.name = "hmac",
- .alloc = hmac_alloc,
- .free = hmac_free,
+ .create = hmac_create,
+ .free = shash_free_instance,
.module = THIS_MODULE,
};
diff --git a/crypto/internal.h b/crypto/internal.h
index 113579a..2d22636 100644
--- a/crypto/internal.h
+++ b/crypto/internal.h
@@ -25,12 +25,7 @@
#include <linux/notifier.h>
#include <linux/rwsem.h>
#include <linux/slab.h>
-
-#ifdef CONFIG_CRYPTO_FIPS
-extern int fips_enabled;
-#else
-#define fips_enabled 0
-#endif
+#include <linux/fips.h>
/* Crypto notification events. */
enum {
@@ -65,18 +60,6 @@
{ }
#endif
-static inline unsigned int crypto_digest_ctxsize(struct crypto_alg *alg)
-{
- unsigned int len = alg->cra_ctxsize;
-
- if (alg->cra_alignmask) {
- len = ALIGN(len, (unsigned long)alg->cra_alignmask + 1);
- len += alg->cra_digest.dia_digestsize;
- }
-
- return len;
-}
-
static inline unsigned int crypto_cipher_ctxsize(struct crypto_alg *alg)
{
return alg->cra_ctxsize;
@@ -91,12 +74,9 @@
struct crypto_alg *crypto_alg_lookup(const char *name, u32 type, u32 mask);
struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask);
-int crypto_init_digest_ops(struct crypto_tfm *tfm);
-int crypto_init_digest_ops_async(struct crypto_tfm *tfm);
int crypto_init_cipher_ops(struct crypto_tfm *tfm);
int crypto_init_compress_ops(struct crypto_tfm *tfm);
-void crypto_exit_digest_ops(struct crypto_tfm *tfm);
void crypto_exit_cipher_ops(struct crypto_tfm *tfm);
void crypto_exit_compress_ops(struct crypto_tfm *tfm);
@@ -111,12 +91,12 @@
u32 mask);
void *crypto_create_tfm(struct crypto_alg *alg,
const struct crypto_type *frontend);
+struct crypto_alg *crypto_find_alg(const char *alg_name,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask);
void *crypto_alloc_tfm(const char *alg_name,
const struct crypto_type *frontend, u32 type, u32 mask);
-int crypto_register_instance(struct crypto_template *tmpl,
- struct crypto_instance *inst);
-
int crypto_register_notifier(struct notifier_block *nb);
int crypto_unregister_notifier(struct notifier_block *nb);
int crypto_probing_notify(unsigned long val, void *v);
diff --git a/crypto/pcompress.c b/crypto/pcompress.c
index bcadc03..f7c4a7d 100644
--- a/crypto/pcompress.c
+++ b/crypto/pcompress.c
@@ -36,14 +36,12 @@
return 0;
}
-static unsigned int crypto_pcomp_extsize(struct crypto_alg *alg,
- const struct crypto_type *frontend)
+static unsigned int crypto_pcomp_extsize(struct crypto_alg *alg)
{
return alg->cra_ctxsize;
}
-static int crypto_pcomp_init_tfm(struct crypto_tfm *tfm,
- const struct crypto_type *frontend)
+static int crypto_pcomp_init_tfm(struct crypto_tfm *tfm)
{
return 0;
}
diff --git a/crypto/rng.c b/crypto/rng.c
index 6e94bc7..ba05e73 100644
--- a/crypto/rng.c
+++ b/crypto/rng.c
@@ -123,4 +123,4 @@
EXPORT_SYMBOL_GPL(crypto_put_default_rng);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Random Number Genertor");
+MODULE_DESCRIPTION("Random Number Generator");
diff --git a/crypto/sha1_generic.c b/crypto/sha1_generic.c
index 9efef20..0416091 100644
--- a/crypto/sha1_generic.c
+++ b/crypto/sha1_generic.c
@@ -25,31 +25,21 @@
#include <crypto/sha.h>
#include <asm/byteorder.h>
-struct sha1_ctx {
- u64 count;
- u32 state[5];
- u8 buffer[64];
-};
-
static int sha1_init(struct shash_desc *desc)
{
- struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *sctx = shash_desc_ctx(desc);
- static const struct sha1_ctx initstate = {
- 0,
- { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
- { 0, }
+ *sctx = (struct sha1_state){
+ .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 },
};
- *sctx = initstate;
-
return 0;
}
static int sha1_update(struct shash_desc *desc, const u8 *data,
unsigned int len)
{
- struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *sctx = shash_desc_ctx(desc);
unsigned int partial, done;
const u8 *src;
@@ -85,7 +75,7 @@
/* Add padding and return the message digest. */
static int sha1_final(struct shash_desc *desc, u8 *out)
{
- struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ struct sha1_state *sctx = shash_desc_ctx(desc);
__be32 *dst = (__be32 *)out;
u32 i, index, padlen;
__be64 bits;
@@ -111,12 +101,31 @@
return 0;
}
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+ struct sha1_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
static struct shash_alg alg = {
.digestsize = SHA1_DIGEST_SIZE,
.init = sha1_init,
.update = sha1_update,
.final = sha1_final,
- .descsize = sizeof(struct sha1_ctx),
+ .export = sha1_export,
+ .import = sha1_import,
+ .descsize = sizeof(struct sha1_state),
+ .statesize = sizeof(struct sha1_state),
.base = {
.cra_name = "sha1",
.cra_driver_name= "sha1-generic",
diff --git a/crypto/sha256_generic.c b/crypto/sha256_generic.c
index 6349d83..c48459e 100644
--- a/crypto/sha256_generic.c
+++ b/crypto/sha256_generic.c
@@ -25,12 +25,6 @@
#include <crypto/sha.h>
#include <asm/byteorder.h>
-struct sha256_ctx {
- u32 count[2];
- u32 state[8];
- u8 buf[128];
-};
-
static inline u32 Ch(u32 x, u32 y, u32 z)
{
return z ^ (x & (y ^ z));
@@ -222,7 +216,7 @@
static int sha224_init(struct shash_desc *desc)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA224_H0;
sctx->state[1] = SHA224_H1;
sctx->state[2] = SHA224_H2;
@@ -231,15 +225,14 @@
sctx->state[5] = SHA224_H5;
sctx->state[6] = SHA224_H6;
sctx->state[7] = SHA224_H7;
- sctx->count[0] = 0;
- sctx->count[1] = 0;
+ sctx->count = 0;
return 0;
}
static int sha256_init(struct shash_desc *desc)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA256_H0;
sctx->state[1] = SHA256_H1;
sctx->state[2] = SHA256_H2;
@@ -248,7 +241,7 @@
sctx->state[5] = SHA256_H5;
sctx->state[6] = SHA256_H6;
sctx->state[7] = SHA256_H7;
- sctx->count[0] = sctx->count[1] = 0;
+ sctx->count = 0;
return 0;
}
@@ -256,58 +249,54 @@
static int sha256_update(struct shash_desc *desc, const u8 *data,
unsigned int len)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
- unsigned int i, index, part_len;
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+ unsigned int partial, done;
+ const u8 *src;
- /* Compute number of bytes mod 128 */
- index = (unsigned int)((sctx->count[0] >> 3) & 0x3f);
+ partial = sctx->count & 0x3f;
+ sctx->count += len;
+ done = 0;
+ src = data;
- /* Update number of bits */
- if ((sctx->count[0] += (len << 3)) < (len << 3)) {
- sctx->count[1]++;
- sctx->count[1] += (len >> 29);
+ if ((partial + len) > 63) {
+ if (partial) {
+ done = -partial;
+ memcpy(sctx->buf + partial, data, done + 64);
+ src = sctx->buf;
+ }
+
+ do {
+ sha256_transform(sctx->state, src);
+ done += 64;
+ src = data + done;
+ } while (done + 63 < len);
+
+ partial = 0;
}
-
- part_len = 64 - index;
-
- /* Transform as many times as possible. */
- if (len >= part_len) {
- memcpy(&sctx->buf[index], data, part_len);
- sha256_transform(sctx->state, sctx->buf);
-
- for (i = part_len; i + 63 < len; i += 64)
- sha256_transform(sctx->state, &data[i]);
- index = 0;
- } else {
- i = 0;
- }
-
- /* Buffer remaining input */
- memcpy(&sctx->buf[index], &data[i], len-i);
+ memcpy(sctx->buf + partial, src, len - done);
return 0;
}
static int sha256_final(struct shash_desc *desc, u8 *out)
{
- struct sha256_ctx *sctx = shash_desc_ctx(desc);
+ struct sha256_state *sctx = shash_desc_ctx(desc);
__be32 *dst = (__be32 *)out;
- __be32 bits[2];
+ __be64 bits;
unsigned int index, pad_len;
int i;
static const u8 padding[64] = { 0x80, };
/* Save number of bits */
- bits[1] = cpu_to_be32(sctx->count[0]);
- bits[0] = cpu_to_be32(sctx->count[1]);
+ bits = cpu_to_be64(sctx->count << 3);
/* Pad out to 56 mod 64. */
- index = (sctx->count[0] >> 3) & 0x3f;
+ index = sctx->count & 0x3f;
pad_len = (index < 56) ? (56 - index) : ((64+56) - index);
sha256_update(desc, padding, pad_len);
/* Append length (before padding) */
- sha256_update(desc, (const u8 *)bits, sizeof(bits));
+ sha256_update(desc, (const u8 *)&bits, sizeof(bits));
/* Store state in digest */
for (i = 0; i < 8; i++)
@@ -331,12 +320,31 @@
return 0;
}
+static int sha256_export(struct shash_desc *desc, void *out)
+{
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int sha256_import(struct shash_desc *desc, const void *in)
+{
+ struct sha256_state *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
static struct shash_alg sha256 = {
.digestsize = SHA256_DIGEST_SIZE,
.init = sha256_init,
.update = sha256_update,
.final = sha256_final,
- .descsize = sizeof(struct sha256_ctx),
+ .export = sha256_export,
+ .import = sha256_import,
+ .descsize = sizeof(struct sha256_state),
+ .statesize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha256",
.cra_driver_name= "sha256-generic",
@@ -351,7 +359,7 @@
.init = sha224_init,
.update = sha256_update,
.final = sha224_final,
- .descsize = sizeof(struct sha256_ctx),
+ .descsize = sizeof(struct sha256_state),
.base = {
.cra_name = "sha224",
.cra_driver_name= "sha224-generic",
diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c
index 3bea38d..9ed9f60 100644
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -21,12 +21,6 @@
#include <linux/percpu.h>
#include <asm/byteorder.h>
-struct sha512_ctx {
- u64 state[8];
- u32 count[4];
- u8 buf[128];
-};
-
static DEFINE_PER_CPU(u64[80], msg_schedule);
static inline u64 Ch(u64 x, u64 y, u64 z)
@@ -141,7 +135,7 @@
static int
sha512_init(struct shash_desc *desc)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA512_H0;
sctx->state[1] = SHA512_H1;
sctx->state[2] = SHA512_H2;
@@ -150,7 +144,7 @@
sctx->state[5] = SHA512_H5;
sctx->state[6] = SHA512_H6;
sctx->state[7] = SHA512_H7;
- sctx->count[0] = sctx->count[1] = sctx->count[2] = sctx->count[3] = 0;
+ sctx->count[0] = sctx->count[1] = 0;
return 0;
}
@@ -158,7 +152,7 @@
static int
sha384_init(struct shash_desc *desc)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
sctx->state[0] = SHA384_H0;
sctx->state[1] = SHA384_H1;
sctx->state[2] = SHA384_H2;
@@ -167,7 +161,7 @@
sctx->state[5] = SHA384_H5;
sctx->state[6] = SHA384_H6;
sctx->state[7] = SHA384_H7;
- sctx->count[0] = sctx->count[1] = sctx->count[2] = sctx->count[3] = 0;
+ sctx->count[0] = sctx->count[1] = 0;
return 0;
}
@@ -175,20 +169,16 @@
static int
sha512_update(struct shash_desc *desc, const u8 *data, unsigned int len)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
unsigned int i, index, part_len;
/* Compute number of bytes mod 128 */
- index = (unsigned int)((sctx->count[0] >> 3) & 0x7F);
+ index = sctx->count[0] & 0x7f;
- /* Update number of bits */
- if ((sctx->count[0] += (len << 3)) < (len << 3)) {
- if ((sctx->count[1] += 1) < 1)
- if ((sctx->count[2] += 1) < 1)
- sctx->count[3]++;
- sctx->count[1] += (len >> 29);
- }
+ /* Update number of bytes */
+ if (!(sctx->count[0] += len))
+ sctx->count[1]++;
part_len = 128 - index;
@@ -214,21 +204,19 @@
static int
sha512_final(struct shash_desc *desc, u8 *hash)
{
- struct sha512_ctx *sctx = shash_desc_ctx(desc);
+ struct sha512_state *sctx = shash_desc_ctx(desc);
static u8 padding[128] = { 0x80, };
__be64 *dst = (__be64 *)hash;
- __be32 bits[4];
+ __be64 bits[2];
unsigned int index, pad_len;
int i;
/* Save number of bits */
- bits[3] = cpu_to_be32(sctx->count[0]);
- bits[2] = cpu_to_be32(sctx->count[1]);
- bits[1] = cpu_to_be32(sctx->count[2]);
- bits[0] = cpu_to_be32(sctx->count[3]);
+ bits[1] = cpu_to_be64(sctx->count[0] << 3);
+ bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
/* Pad out to 112 mod 128. */
- index = (sctx->count[0] >> 3) & 0x7f;
+ index = sctx->count[0] & 0x7f;
pad_len = (index < 112) ? (112 - index) : ((128+112) - index);
sha512_update(desc, padding, pad_len);
@@ -240,7 +228,7 @@
dst[i] = cpu_to_be64(sctx->state[i]);
/* Zeroize sensitive information. */
- memset(sctx, 0, sizeof(struct sha512_ctx));
+ memset(sctx, 0, sizeof(struct sha512_state));
return 0;
}
@@ -262,7 +250,7 @@
.init = sha512_init,
.update = sha512_update,
.final = sha512_final,
- .descsize = sizeof(struct sha512_ctx),
+ .descsize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha512",
.cra_flags = CRYPTO_ALG_TYPE_SHASH,
@@ -276,7 +264,7 @@
.init = sha384_init,
.update = sha512_update,
.final = sha384_final,
- .descsize = sizeof(struct sha512_ctx),
+ .descsize = sizeof(struct sha512_state),
.base = {
.cra_name = "sha384",
.cra_flags = CRYPTO_ALG_TYPE_SHASH,
diff --git a/crypto/shash.c b/crypto/shash.c
index 2ccc8b0..91f7b9d 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -22,6 +22,12 @@
static const struct crypto_type crypto_shash_type;
+static int shash_no_setkey(struct crypto_shash *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ return -ENOSYS;
+}
+
static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen)
{
@@ -39,8 +45,7 @@
alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
memcpy(alignbuffer, key, keylen);
err = shash->setkey(tfm, alignbuffer, keylen);
- memset(alignbuffer, 0, keylen);
- kfree(buffer);
+ kzfree(buffer);
return err;
}
@@ -50,9 +55,6 @@
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned long alignmask = crypto_shash_alignmask(tfm);
- if (!shash->setkey)
- return -ENOSYS;
-
if ((unsigned long)key & alignmask)
return shash_setkey_unaligned(tfm, key, keylen);
@@ -74,15 +76,19 @@
unsigned long alignmask = crypto_shash_alignmask(tfm);
unsigned int unaligned_len = alignmask + 1 -
((unsigned long)data & alignmask);
- u8 buf[shash_align_buffer_size(unaligned_len, alignmask)]
+ u8 ubuf[shash_align_buffer_size(unaligned_len, alignmask)]
__attribute__ ((aligned));
+ u8 *buf = PTR_ALIGN(&ubuf[0], alignmask + 1);
+ int err;
if (unaligned_len > len)
unaligned_len = len;
memcpy(buf, data, unaligned_len);
+ err = shash->update(desc, buf, unaligned_len);
+ memset(buf, 0, unaligned_len);
- return shash->update(desc, buf, unaligned_len) ?:
+ return err ?:
shash->update(desc, data + unaligned_len, len - unaligned_len);
}
@@ -106,12 +112,19 @@
unsigned long alignmask = crypto_shash_alignmask(tfm);
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned int ds = crypto_shash_digestsize(tfm);
- u8 buf[shash_align_buffer_size(ds, alignmask)]
+ u8 ubuf[shash_align_buffer_size(ds, alignmask)]
__attribute__ ((aligned));
+ u8 *buf = PTR_ALIGN(&ubuf[0], alignmask + 1);
int err;
err = shash->final(desc, buf);
+ if (err)
+ goto out;
+
memcpy(out, buf, ds);
+
+out:
+ memset(buf, 0, ds);
return err;
}
@@ -142,8 +155,7 @@
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned long alignmask = crypto_shash_alignmask(tfm);
- if (((unsigned long)data | (unsigned long)out) & alignmask ||
- !shash->finup)
+ if (((unsigned long)data | (unsigned long)out) & alignmask)
return shash_finup_unaligned(desc, data, len, out);
return shash->finup(desc, data, len, out);
@@ -154,8 +166,7 @@
unsigned int len, u8 *out)
{
return crypto_shash_init(desc) ?:
- crypto_shash_update(desc, data, len) ?:
- crypto_shash_final(desc, out);
+ crypto_shash_finup(desc, data, len, out);
}
int crypto_shash_digest(struct shash_desc *desc, const u8 *data,
@@ -165,27 +176,24 @@
struct shash_alg *shash = crypto_shash_alg(tfm);
unsigned long alignmask = crypto_shash_alignmask(tfm);
- if (((unsigned long)data | (unsigned long)out) & alignmask ||
- !shash->digest)
+ if (((unsigned long)data | (unsigned long)out) & alignmask)
return shash_digest_unaligned(desc, data, len, out);
return shash->digest(desc, data, len, out);
}
EXPORT_SYMBOL_GPL(crypto_shash_digest);
-int crypto_shash_import(struct shash_desc *desc, const u8 *in)
+static int shash_default_export(struct shash_desc *desc, void *out)
{
- struct crypto_shash *tfm = desc->tfm;
- struct shash_alg *alg = crypto_shash_alg(tfm);
-
- memcpy(shash_desc_ctx(desc), in, crypto_shash_descsize(tfm));
-
- if (alg->reinit)
- alg->reinit(desc);
-
+ memcpy(out, shash_desc_ctx(desc), crypto_shash_descsize(desc->tfm));
return 0;
}
-EXPORT_SYMBOL_GPL(crypto_shash_import);
+
+static int shash_default_import(struct shash_desc *desc, const void *in)
+{
+ memcpy(shash_desc_ctx(desc), in, crypto_shash_descsize(desc->tfm));
+ return 0;
+}
static int shash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
unsigned int keylen)
@@ -206,9 +214,8 @@
return crypto_shash_init(desc);
}
-static int shash_async_update(struct ahash_request *req)
+int shash_ahash_update(struct ahash_request *req, struct shash_desc *desc)
{
- struct shash_desc *desc = ahash_request_ctx(req);
struct crypto_hash_walk walk;
int nbytes;
@@ -218,13 +225,51 @@
return nbytes;
}
+EXPORT_SYMBOL_GPL(shash_ahash_update);
+
+static int shash_async_update(struct ahash_request *req)
+{
+ return shash_ahash_update(req, ahash_request_ctx(req));
+}
static int shash_async_final(struct ahash_request *req)
{
return crypto_shash_final(ahash_request_ctx(req), req->result);
}
-static int shash_async_digest(struct ahash_request *req)
+int shash_ahash_finup(struct ahash_request *req, struct shash_desc *desc)
+{
+ struct crypto_hash_walk walk;
+ int nbytes;
+
+ nbytes = crypto_hash_walk_first(req, &walk);
+ if (!nbytes)
+ return crypto_shash_final(desc, req->result);
+
+ do {
+ nbytes = crypto_hash_walk_last(&walk) ?
+ crypto_shash_finup(desc, walk.data, nbytes,
+ req->result) :
+ crypto_shash_update(desc, walk.data, nbytes);
+ nbytes = crypto_hash_walk_done(&walk, nbytes);
+ } while (nbytes > 0);
+
+ return nbytes;
+}
+EXPORT_SYMBOL_GPL(shash_ahash_finup);
+
+static int shash_async_finup(struct ahash_request *req)
+{
+ struct crypto_shash **ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(req));
+ struct shash_desc *desc = ahash_request_ctx(req);
+
+ desc->tfm = *ctx;
+ desc->flags = req->base.flags;
+
+ return shash_ahash_finup(req, desc);
+}
+
+int shash_ahash_digest(struct ahash_request *req, struct shash_desc *desc)
{
struct scatterlist *sg = req->src;
unsigned int offset = sg->offset;
@@ -232,35 +277,41 @@
int err;
if (nbytes < min(sg->length, ((unsigned int)(PAGE_SIZE)) - offset)) {
- struct crypto_shash **ctx =
- crypto_ahash_ctx(crypto_ahash_reqtfm(req));
- struct shash_desc *desc = ahash_request_ctx(req);
void *data;
- desc->tfm = *ctx;
- desc->flags = req->base.flags;
-
data = crypto_kmap(sg_page(sg), 0);
err = crypto_shash_digest(desc, data + offset, nbytes,
req->result);
crypto_kunmap(data, 0);
crypto_yield(desc->flags);
- goto out;
- }
+ } else
+ err = crypto_shash_init(desc) ?:
+ shash_ahash_finup(req, desc);
- err = shash_async_init(req);
- if (err)
- goto out;
-
- err = shash_async_update(req);
- if (err)
- goto out;
-
- err = shash_async_final(req);
-
-out:
return err;
}
+EXPORT_SYMBOL_GPL(shash_ahash_digest);
+
+static int shash_async_digest(struct ahash_request *req)
+{
+ struct crypto_shash **ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(req));
+ struct shash_desc *desc = ahash_request_ctx(req);
+
+ desc->tfm = *ctx;
+ desc->flags = req->base.flags;
+
+ return shash_ahash_digest(req, desc);
+}
+
+static int shash_async_export(struct ahash_request *req, void *out)
+{
+ return crypto_shash_export(ahash_request_ctx(req), out);
+}
+
+static int shash_async_import(struct ahash_request *req, const void *in)
+{
+ return crypto_shash_import(ahash_request_ctx(req), in);
+}
static void crypto_exit_shash_ops_async(struct crypto_tfm *tfm)
{
@@ -269,11 +320,11 @@
crypto_free_shash(*ctx);
}
-static int crypto_init_shash_ops_async(struct crypto_tfm *tfm)
+int crypto_init_shash_ops_async(struct crypto_tfm *tfm)
{
struct crypto_alg *calg = tfm->__crt_alg;
struct shash_alg *alg = __crypto_shash_alg(calg);
- struct ahash_tfm *crt = &tfm->crt_ahash;
+ struct crypto_ahash *crt = __crypto_ahash_cast(tfm);
struct crypto_shash **ctx = crypto_tfm_ctx(tfm);
struct crypto_shash *shash;
@@ -291,11 +342,17 @@
crt->init = shash_async_init;
crt->update = shash_async_update;
- crt->final = shash_async_final;
+ crt->final = shash_async_final;
+ crt->finup = shash_async_finup;
crt->digest = shash_async_digest;
- crt->setkey = shash_async_setkey;
- crt->digestsize = alg->digestsize;
+ if (alg->setkey)
+ crt->setkey = shash_async_setkey;
+ if (alg->export)
+ crt->export = shash_async_export;
+ if (alg->import)
+ crt->import = shash_async_import;
+
crt->reqsize = sizeof(struct shash_desc) + crypto_shash_descsize(shash);
return 0;
@@ -304,14 +361,16 @@
static int shash_compat_setkey(struct crypto_hash *tfm, const u8 *key,
unsigned int keylen)
{
- struct shash_desc *desc = crypto_hash_ctx(tfm);
+ struct shash_desc **descp = crypto_hash_ctx(tfm);
+ struct shash_desc *desc = *descp;
return crypto_shash_setkey(desc->tfm, key, keylen);
}
static int shash_compat_init(struct hash_desc *hdesc)
{
- struct shash_desc *desc = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc *desc = *descp;
desc->flags = hdesc->flags;
@@ -321,7 +380,8 @@
static int shash_compat_update(struct hash_desc *hdesc, struct scatterlist *sg,
unsigned int len)
{
- struct shash_desc *desc = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc *desc = *descp;
struct crypto_hash_walk walk;
int nbytes;
@@ -334,7 +394,9 @@
static int shash_compat_final(struct hash_desc *hdesc, u8 *out)
{
- return crypto_shash_final(crypto_hash_ctx(hdesc->tfm), out);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+
+ return crypto_shash_final(*descp, out);
}
static int shash_compat_digest(struct hash_desc *hdesc, struct scatterlist *sg,
@@ -344,7 +406,8 @@
int err;
if (nbytes < min(sg->length, ((unsigned int)(PAGE_SIZE)) - offset)) {
- struct shash_desc *desc = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc **descp = crypto_hash_ctx(hdesc->tfm);
+ struct shash_desc *desc = *descp;
void *data;
desc->flags = hdesc->flags;
@@ -372,9 +435,11 @@
static void crypto_exit_shash_ops_compat(struct crypto_tfm *tfm)
{
- struct shash_desc *desc= crypto_tfm_ctx(tfm);
+ struct shash_desc **descp = crypto_tfm_ctx(tfm);
+ struct shash_desc *desc = *descp;
crypto_free_shash(desc->tfm);
+ kzfree(desc);
}
static int crypto_init_shash_ops_compat(struct crypto_tfm *tfm)
@@ -382,8 +447,9 @@
struct hash_tfm *crt = &tfm->crt_hash;
struct crypto_alg *calg = tfm->__crt_alg;
struct shash_alg *alg = __crypto_shash_alg(calg);
- struct shash_desc *desc = crypto_tfm_ctx(tfm);
+ struct shash_desc **descp = crypto_tfm_ctx(tfm);
struct crypto_shash *shash;
+ struct shash_desc *desc;
if (!crypto_mod_get(calg))
return -EAGAIN;
@@ -394,6 +460,14 @@
return PTR_ERR(shash);
}
+ desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(shash),
+ GFP_KERNEL);
+ if (!desc) {
+ crypto_free_shash(shash);
+ return -ENOMEM;
+ }
+
+ *descp = desc;
desc->tfm = shash;
tfm->exit = crypto_exit_shash_ops_compat;
@@ -413,8 +487,6 @@
switch (mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_HASH_MASK:
return crypto_init_shash_ops_compat(tfm);
- case CRYPTO_ALG_TYPE_AHASH_MASK:
- return crypto_init_shash_ops_async(tfm);
}
return -EINVAL;
@@ -423,26 +495,23 @@
static unsigned int crypto_shash_ctxsize(struct crypto_alg *alg, u32 type,
u32 mask)
{
- struct shash_alg *salg = __crypto_shash_alg(alg);
-
switch (mask & CRYPTO_ALG_TYPE_MASK) {
case CRYPTO_ALG_TYPE_HASH_MASK:
- return sizeof(struct shash_desc) + salg->descsize;
- case CRYPTO_ALG_TYPE_AHASH_MASK:
- return sizeof(struct crypto_shash *);
+ return sizeof(struct shash_desc *);
}
return 0;
}
-static int crypto_shash_init_tfm(struct crypto_tfm *tfm,
- const struct crypto_type *frontend)
+static int crypto_shash_init_tfm(struct crypto_tfm *tfm)
{
+ struct crypto_shash *hash = __crypto_shash_cast(tfm);
+
+ hash->descsize = crypto_shash_alg(hash)->descsize;
return 0;
}
-static unsigned int crypto_shash_extsize(struct crypto_alg *alg,
- const struct crypto_type *frontend)
+static unsigned int crypto_shash_extsize(struct crypto_alg *alg)
{
return alg->cra_ctxsize;
}
@@ -456,7 +525,6 @@
seq_printf(m, "type : shash\n");
seq_printf(m, "blocksize : %u\n", alg->cra_blocksize);
seq_printf(m, "digestsize : %u\n", salg->digestsize);
- seq_printf(m, "descsize : %u\n", salg->descsize);
}
static const struct crypto_type crypto_shash_type = {
@@ -480,18 +548,43 @@
}
EXPORT_SYMBOL_GPL(crypto_alloc_shash);
-int crypto_register_shash(struct shash_alg *alg)
+static int shash_prepare_alg(struct shash_alg *alg)
{
struct crypto_alg *base = &alg->base;
if (alg->digestsize > PAGE_SIZE / 8 ||
- alg->descsize > PAGE_SIZE / 8)
+ alg->descsize > PAGE_SIZE / 8 ||
+ alg->statesize > PAGE_SIZE / 8)
return -EINVAL;
base->cra_type = &crypto_shash_type;
base->cra_flags &= ~CRYPTO_ALG_TYPE_MASK;
base->cra_flags |= CRYPTO_ALG_TYPE_SHASH;
+ if (!alg->finup)
+ alg->finup = shash_finup_unaligned;
+ if (!alg->digest)
+ alg->digest = shash_digest_unaligned;
+ if (!alg->export) {
+ alg->export = shash_default_export;
+ alg->import = shash_default_import;
+ alg->statesize = alg->descsize;
+ }
+ if (!alg->setkey)
+ alg->setkey = shash_no_setkey;
+
+ return 0;
+}
+
+int crypto_register_shash(struct shash_alg *alg)
+{
+ struct crypto_alg *base = &alg->base;
+ int err;
+
+ err = shash_prepare_alg(alg);
+ if (err)
+ return err;
+
return crypto_register_alg(base);
}
EXPORT_SYMBOL_GPL(crypto_register_shash);
@@ -502,5 +595,44 @@
}
EXPORT_SYMBOL_GPL(crypto_unregister_shash);
+int shash_register_instance(struct crypto_template *tmpl,
+ struct shash_instance *inst)
+{
+ int err;
+
+ err = shash_prepare_alg(&inst->alg);
+ if (err)
+ return err;
+
+ return crypto_register_instance(tmpl, shash_crypto_instance(inst));
+}
+EXPORT_SYMBOL_GPL(shash_register_instance);
+
+void shash_free_instance(struct crypto_instance *inst)
+{
+ crypto_drop_spawn(crypto_instance_ctx(inst));
+ kfree(shash_instance(inst));
+}
+EXPORT_SYMBOL_GPL(shash_free_instance);
+
+int crypto_init_shash_spawn(struct crypto_shash_spawn *spawn,
+ struct shash_alg *alg,
+ struct crypto_instance *inst)
+{
+ return crypto_init_spawn2(&spawn->base, &alg->base, inst,
+ &crypto_shash_type);
+}
+EXPORT_SYMBOL_GPL(crypto_init_shash_spawn);
+
+struct shash_alg *shash_attr_alg(struct rtattr *rta, u32 type, u32 mask)
+{
+ struct crypto_alg *alg;
+
+ alg = crypto_attr_alg2(rta, &crypto_shash_type, type, mask);
+ return IS_ERR(alg) ? ERR_CAST(alg) :
+ container_of(alg, struct shash_alg, base);
+}
+EXPORT_SYMBOL_GPL(shash_attr_alg);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Synchronous cryptographic hash type");
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index d59ba50..aa3f84c 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -45,6 +45,9 @@
*/
static unsigned int sec;
+static char *alg = NULL;
+static u32 type;
+static u32 mask;
static int mode;
static char *tvmem[TVMEMSIZE];
@@ -716,6 +719,10 @@
ret += tcrypt_test("hmac(rmd160)");
break;
+ case 109:
+ ret += tcrypt_test("vmac(aes)");
+ break;
+
case 150:
ret += tcrypt_test("ansi_cprng");
break;
@@ -885,6 +892,12 @@
return ret;
}
+static int do_alg_test(const char *alg, u32 type, u32 mask)
+{
+ return crypto_has_alg(alg, type, mask ?: CRYPTO_ALG_TYPE_MASK) ?
+ 0 : -ENOENT;
+}
+
static int __init tcrypt_mod_init(void)
{
int err = -ENOMEM;
@@ -896,7 +909,11 @@
goto err_free_tv;
}
- err = do_test(mode);
+ if (alg)
+ err = do_alg_test(alg, type, mask);
+ else
+ err = do_test(mode);
+
if (err) {
printk(KERN_ERR "tcrypt: one or more tests failed!\n");
goto err_free_tv;
@@ -928,6 +945,9 @@
module_init(tcrypt_mod_init);
module_exit(tcrypt_mod_fini);
+module_param(alg, charp, 0);
+module_param(type, uint, 0);
+module_param(mask, uint, 0);
module_param(mode, int, 0);
module_param(sec, uint, 0);
MODULE_PARM_DESC(sec, "Length in seconds of speed tests "
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index e9e9d84..6d5b746 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -190,10 +190,6 @@
hash_buff = xbuf[0];
- ret = -EINVAL;
- if (WARN_ON(template[i].psize > PAGE_SIZE))
- goto out;
-
memcpy(hash_buff, template[i].plaintext, template[i].psize);
sg_init_one(&sg[0], hash_buff, template[i].psize);
@@ -2252,6 +2248,15 @@
}
}
}, {
+ .alg = "vmac(aes)",
+ .test = alg_test_hash,
+ .suite = {
+ .hash = {
+ .vecs = aes_vmac128_tv_template,
+ .count = VMAC_AES_TEST_VECTORS
+ }
+ }
+ }, {
.alg = "wp256",
.test = alg_test_hash,
.suite = {
@@ -2348,6 +2353,7 @@
int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
{
int i;
+ int j;
int rc;
if ((type & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_CIPHER) {
@@ -2369,14 +2375,22 @@
}
i = alg_find_test(alg);
- if (i < 0)
+ j = alg_find_test(driver);
+ if (i < 0 && j < 0)
goto notest;
- if (fips_enabled && !alg_test_descs[i].fips_allowed)
+ if (fips_enabled && ((i >= 0 && !alg_test_descs[i].fips_allowed) ||
+ (j >= 0 && !alg_test_descs[j].fips_allowed)))
goto non_fips_alg;
- rc = alg_test_descs[i].test(alg_test_descs + i, driver,
- type, mask);
+ rc = 0;
+ if (i >= 0)
+ rc |= alg_test_descs[i].test(alg_test_descs + i, driver,
+ type, mask);
+ if (j >= 0)
+ rc |= alg_test_descs[j].test(alg_test_descs + j, driver,
+ type, mask);
+
test_done:
if (fips_enabled && rc)
panic("%s: %s alg self test failed in fips mode!\n", driver, alg);
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index 6931622..9963b18 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -1654,6 +1654,22 @@
}
};
+#define VMAC_AES_TEST_VECTORS 1
+static char vmac_string[128] = {'\x01', '\x01', '\x01', '\x01',
+ '\x02', '\x03', '\x02', '\x02',
+ '\x02', '\x04', '\x01', '\x07',
+ '\x04', '\x01', '\x04', '\x03',};
+static struct hash_testvec aes_vmac128_tv_template[] = {
+ {
+ .key = "\x00\x01\x02\x03\x04\x05\x06\x07"
+ "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f",
+ .plaintext = vmac_string,
+ .digest = "\xcb\xd7\x8a\xfd\xb7\x33\x79\xe7",
+ .psize = 128,
+ .ksize = 16,
+ },
+};
+
/*
* SHA384 HMAC test vectors from RFC4231
*/
diff --git a/crypto/vmac.c b/crypto/vmac.c
new file mode 100644
index 0000000..0a9468e
--- /dev/null
+++ b/crypto/vmac.c
@@ -0,0 +1,678 @@
+/*
+ * Modified to interface to the Linux kernel
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+/* --------------------------------------------------------------------------
+ * VMAC and VHASH Implementation by Ted Krovetz (tdk@acm.org) and Wei Dai.
+ * This implementation is herby placed in the public domain.
+ * The authors offers no warranty. Use at your own risk.
+ * Please send bug reports to the authors.
+ * Last modified: 17 APR 08, 1700 PDT
+ * ----------------------------------------------------------------------- */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/scatterlist.h>
+#include <asm/byteorder.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/vmac.h>
+#include <crypto/internal/hash.h>
+
+/*
+ * Constants and masks
+ */
+#define UINT64_C(x) x##ULL
+const u64 p64 = UINT64_C(0xfffffffffffffeff); /* 2^64 - 257 prime */
+const u64 m62 = UINT64_C(0x3fffffffffffffff); /* 62-bit mask */
+const u64 m63 = UINT64_C(0x7fffffffffffffff); /* 63-bit mask */
+const u64 m64 = UINT64_C(0xffffffffffffffff); /* 64-bit mask */
+const u64 mpoly = UINT64_C(0x1fffffff1fffffff); /* Poly key mask */
+
+#ifdef __LITTLE_ENDIAN
+#define INDEX_HIGH 1
+#define INDEX_LOW 0
+#else
+#define INDEX_HIGH 0
+#define INDEX_LOW 1
+#endif
+
+/*
+ * The following routines are used in this implementation. They are
+ * written via macros to simulate zero-overhead call-by-reference.
+ *
+ * MUL64: 64x64->128-bit multiplication
+ * PMUL64: assumes top bits cleared on inputs
+ * ADD128: 128x128->128-bit addition
+ */
+
+#define ADD128(rh, rl, ih, il) \
+ do { \
+ u64 _il = (il); \
+ (rl) += (_il); \
+ if ((rl) < (_il)) \
+ (rh)++; \
+ (rh) += (ih); \
+ } while (0)
+
+#define MUL32(i1, i2) ((u64)(u32)(i1)*(u32)(i2))
+
+#define PMUL64(rh, rl, i1, i2) /* Assumes m doesn't overflow */ \
+ do { \
+ u64 _i1 = (i1), _i2 = (i2); \
+ u64 m = MUL32(_i1, _i2>>32) + MUL32(_i1>>32, _i2); \
+ rh = MUL32(_i1>>32, _i2>>32); \
+ rl = MUL32(_i1, _i2); \
+ ADD128(rh, rl, (m >> 32), (m << 32)); \
+ } while (0)
+
+#define MUL64(rh, rl, i1, i2) \
+ do { \
+ u64 _i1 = (i1), _i2 = (i2); \
+ u64 m1 = MUL32(_i1, _i2>>32); \
+ u64 m2 = MUL32(_i1>>32, _i2); \
+ rh = MUL32(_i1>>32, _i2>>32); \
+ rl = MUL32(_i1, _i2); \
+ ADD128(rh, rl, (m1 >> 32), (m1 << 32)); \
+ ADD128(rh, rl, (m2 >> 32), (m2 << 32)); \
+ } while (0)
+
+/*
+ * For highest performance the L1 NH and L2 polynomial hashes should be
+ * carefully implemented to take advantage of one's target architechture.
+ * Here these two hash functions are defined multiple time; once for
+ * 64-bit architectures, once for 32-bit SSE2 architectures, and once
+ * for the rest (32-bit) architectures.
+ * For each, nh_16 *must* be defined (works on multiples of 16 bytes).
+ * Optionally, nh_vmac_nhbytes can be defined (for multiples of
+ * VMAC_NHBYTES), and nh_16_2 and nh_vmac_nhbytes_2 (versions that do two
+ * NH computations at once).
+ */
+
+#ifdef CONFIG_64BIT
+
+#define nh_16(mp, kp, nw, rh, rl) \
+ do { \
+ int i; u64 th, tl; \
+ rh = rl = 0; \
+ for (i = 0; i < nw; i += 2) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ } \
+ } while (0)
+
+#define nh_16_2(mp, kp, nw, rh, rl, rh1, rl1) \
+ do { \
+ int i; u64 th, tl; \
+ rh1 = rl1 = rh = rl = 0; \
+ for (i = 0; i < nw; i += 2) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+3]); \
+ ADD128(rh1, rl1, th, tl); \
+ } \
+ } while (0)
+
+#if (VMAC_NHBYTES >= 64) /* These versions do 64-bytes of message at a time */
+#define nh_vmac_nhbytes(mp, kp, nw, rh, rl) \
+ do { \
+ int i; u64 th, tl; \
+ rh = rl = 0; \
+ for (i = 0; i < nw; i += 8) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+2)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+3)+(kp)[i+3]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+4)+(kp)[i+4], \
+ le64_to_cpup((mp)+i+5)+(kp)[i+5]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+6)+(kp)[i+6], \
+ le64_to_cpup((mp)+i+7)+(kp)[i+7]); \
+ ADD128(rh, rl, th, tl); \
+ } \
+ } while (0)
+
+#define nh_vmac_nhbytes_2(mp, kp, nw, rh, rl, rh1, rl1) \
+ do { \
+ int i; u64 th, tl; \
+ rh1 = rl1 = rh = rl = 0; \
+ for (i = 0; i < nw; i += 8) { \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+1]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+1)+(kp)[i+3]); \
+ ADD128(rh1, rl1, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+2)+(kp)[i+2], \
+ le64_to_cpup((mp)+i+3)+(kp)[i+3]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+2)+(kp)[i+4], \
+ le64_to_cpup((mp)+i+3)+(kp)[i+5]); \
+ ADD128(rh1, rl1, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+4)+(kp)[i+4], \
+ le64_to_cpup((mp)+i+5)+(kp)[i+5]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+4)+(kp)[i+6], \
+ le64_to_cpup((mp)+i+5)+(kp)[i+7]); \
+ ADD128(rh1, rl1, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+6)+(kp)[i+6], \
+ le64_to_cpup((mp)+i+7)+(kp)[i+7]); \
+ ADD128(rh, rl, th, tl); \
+ MUL64(th, tl, le64_to_cpup((mp)+i+6)+(kp)[i+8], \
+ le64_to_cpup((mp)+i+7)+(kp)[i+9]); \
+ ADD128(rh1, rl1, th, tl); \
+ } \
+ } while (0)
+#endif
+
+#define poly_step(ah, al, kh, kl, mh, ml) \
+ do { \
+ u64 t1h, t1l, t2h, t2l, t3h, t3l, z = 0; \
+ /* compute ab*cd, put bd into result registers */ \
+ PMUL64(t3h, t3l, al, kh); \
+ PMUL64(t2h, t2l, ah, kl); \
+ PMUL64(t1h, t1l, ah, 2*kh); \
+ PMUL64(ah, al, al, kl); \
+ /* add 2 * ac to result */ \
+ ADD128(ah, al, t1h, t1l); \
+ /* add together ad + bc */ \
+ ADD128(t2h, t2l, t3h, t3l); \
+ /* now (ah,al), (t2l,2*t2h) need summing */ \
+ /* first add the high registers, carrying into t2h */ \
+ ADD128(t2h, ah, z, t2l); \
+ /* double t2h and add top bit of ah */ \
+ t2h = 2 * t2h + (ah >> 63); \
+ ah &= m63; \
+ /* now add the low registers */ \
+ ADD128(ah, al, mh, ml); \
+ ADD128(ah, al, z, t2h); \
+ } while (0)
+
+#else /* ! CONFIG_64BIT */
+
+#ifndef nh_16
+#define nh_16(mp, kp, nw, rh, rl) \
+ do { \
+ u64 t1, t2, m1, m2, t; \
+ int i; \
+ rh = rl = t = 0; \
+ for (i = 0; i < nw; i += 2) { \
+ t1 = le64_to_cpup(mp+i) + kp[i]; \
+ t2 = le64_to_cpup(mp+i+1) + kp[i+1]; \
+ m2 = MUL32(t1 >> 32, t2); \
+ m1 = MUL32(t1, t2 >> 32); \
+ ADD128(rh, rl, MUL32(t1 >> 32, t2 >> 32), \
+ MUL32(t1, t2)); \
+ rh += (u64)(u32)(m1 >> 32) \
+ + (u32)(m2 >> 32); \
+ t += (u64)(u32)m1 + (u32)m2; \
+ } \
+ ADD128(rh, rl, (t >> 32), (t << 32)); \
+ } while (0)
+#endif
+
+static void poly_step_func(u64 *ahi, u64 *alo,
+ const u64 *kh, const u64 *kl,
+ const u64 *mh, const u64 *ml)
+{
+#define a0 (*(((u32 *)alo)+INDEX_LOW))
+#define a1 (*(((u32 *)alo)+INDEX_HIGH))
+#define a2 (*(((u32 *)ahi)+INDEX_LOW))
+#define a3 (*(((u32 *)ahi)+INDEX_HIGH))
+#define k0 (*(((u32 *)kl)+INDEX_LOW))
+#define k1 (*(((u32 *)kl)+INDEX_HIGH))
+#define k2 (*(((u32 *)kh)+INDEX_LOW))
+#define k3 (*(((u32 *)kh)+INDEX_HIGH))
+
+ u64 p, q, t;
+ u32 t2;
+
+ p = MUL32(a3, k3);
+ p += p;
+ p += *(u64 *)mh;
+ p += MUL32(a0, k2);
+ p += MUL32(a1, k1);
+ p += MUL32(a2, k0);
+ t = (u32)(p);
+ p >>= 32;
+ p += MUL32(a0, k3);
+ p += MUL32(a1, k2);
+ p += MUL32(a2, k1);
+ p += MUL32(a3, k0);
+ t |= ((u64)((u32)p & 0x7fffffff)) << 32;
+ p >>= 31;
+ p += (u64)(((u32 *)ml)[INDEX_LOW]);
+ p += MUL32(a0, k0);
+ q = MUL32(a1, k3);
+ q += MUL32(a2, k2);
+ q += MUL32(a3, k1);
+ q += q;
+ p += q;
+ t2 = (u32)(p);
+ p >>= 32;
+ p += (u64)(((u32 *)ml)[INDEX_HIGH]);
+ p += MUL32(a0, k1);
+ p += MUL32(a1, k0);
+ q = MUL32(a2, k3);
+ q += MUL32(a3, k2);
+ q += q;
+ p += q;
+ *(u64 *)(alo) = (p << 32) | t2;
+ p >>= 32;
+ *(u64 *)(ahi) = p + t;
+
+#undef a0
+#undef a1
+#undef a2
+#undef a3
+#undef k0
+#undef k1
+#undef k2
+#undef k3
+}
+
+#define poly_step(ah, al, kh, kl, mh, ml) \
+ poly_step_func(&(ah), &(al), &(kh), &(kl), &(mh), &(ml))
+
+#endif /* end of specialized NH and poly definitions */
+
+/* At least nh_16 is defined. Defined others as needed here */
+#ifndef nh_16_2
+#define nh_16_2(mp, kp, nw, rh, rl, rh2, rl2) \
+ do { \
+ nh_16(mp, kp, nw, rh, rl); \
+ nh_16(mp, ((kp)+2), nw, rh2, rl2); \
+ } while (0)
+#endif
+#ifndef nh_vmac_nhbytes
+#define nh_vmac_nhbytes(mp, kp, nw, rh, rl) \
+ nh_16(mp, kp, nw, rh, rl)
+#endif
+#ifndef nh_vmac_nhbytes_2
+#define nh_vmac_nhbytes_2(mp, kp, nw, rh, rl, rh2, rl2) \
+ do { \
+ nh_vmac_nhbytes(mp, kp, nw, rh, rl); \
+ nh_vmac_nhbytes(mp, ((kp)+2), nw, rh2, rl2); \
+ } while (0)
+#endif
+
+static void vhash_abort(struct vmac_ctx *ctx)
+{
+ ctx->polytmp[0] = ctx->polykey[0] ;
+ ctx->polytmp[1] = ctx->polykey[1] ;
+ ctx->first_block_processed = 0;
+}
+
+static u64 l3hash(u64 p1, u64 p2,
+ u64 k1, u64 k2, u64 len)
+{
+ u64 rh, rl, t, z = 0;
+
+ /* fully reduce (p1,p2)+(len,0) mod p127 */
+ t = p1 >> 63;
+ p1 &= m63;
+ ADD128(p1, p2, len, t);
+ /* At this point, (p1,p2) is at most 2^127+(len<<64) */
+ t = (p1 > m63) + ((p1 == m63) && (p2 == m64));
+ ADD128(p1, p2, z, t);
+ p1 &= m63;
+
+ /* compute (p1,p2)/(2^64-2^32) and (p1,p2)%(2^64-2^32) */
+ t = p1 + (p2 >> 32);
+ t += (t >> 32);
+ t += (u32)t > 0xfffffffeu;
+ p1 += (t >> 32);
+ p2 += (p1 << 32);
+
+ /* compute (p1+k1)%p64 and (p2+k2)%p64 */
+ p1 += k1;
+ p1 += (0 - (p1 < k1)) & 257;
+ p2 += k2;
+ p2 += (0 - (p2 < k2)) & 257;
+
+ /* compute (p1+k1)*(p2+k2)%p64 */
+ MUL64(rh, rl, p1, p2);
+ t = rh >> 56;
+ ADD128(t, rl, z, rh);
+ rh <<= 8;
+ ADD128(t, rl, z, rh);
+ t += t << 8;
+ rl += t;
+ rl += (0 - (rl < t)) & 257;
+ rl += (0 - (rl > p64-1)) & 257;
+ return rl;
+}
+
+static void vhash_update(const unsigned char *m,
+ unsigned int mbytes, /* Pos multiple of VMAC_NHBYTES */
+ struct vmac_ctx *ctx)
+{
+ u64 rh, rl, *mptr;
+ const u64 *kptr = (u64 *)ctx->nhkey;
+ int i;
+ u64 ch, cl;
+ u64 pkh = ctx->polykey[0];
+ u64 pkl = ctx->polykey[1];
+
+ mptr = (u64 *)m;
+ i = mbytes / VMAC_NHBYTES; /* Must be non-zero */
+
+ ch = ctx->polytmp[0];
+ cl = ctx->polytmp[1];
+
+ if (!ctx->first_block_processed) {
+ ctx->first_block_processed = 1;
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, rh, rl);
+ rh &= m62;
+ ADD128(ch, cl, rh, rl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ i--;
+ }
+
+ while (i--) {
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, rh, rl);
+ rh &= m62;
+ poly_step(ch, cl, pkh, pkl, rh, rl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ }
+
+ ctx->polytmp[0] = ch;
+ ctx->polytmp[1] = cl;
+}
+
+static u64 vhash(unsigned char m[], unsigned int mbytes,
+ u64 *tagl, struct vmac_ctx *ctx)
+{
+ u64 rh, rl, *mptr;
+ const u64 *kptr = (u64 *)ctx->nhkey;
+ int i, remaining;
+ u64 ch, cl;
+ u64 pkh = ctx->polykey[0];
+ u64 pkl = ctx->polykey[1];
+
+ mptr = (u64 *)m;
+ i = mbytes / VMAC_NHBYTES;
+ remaining = mbytes % VMAC_NHBYTES;
+
+ if (ctx->first_block_processed) {
+ ch = ctx->polytmp[0];
+ cl = ctx->polytmp[1];
+ } else if (i) {
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, ch, cl);
+ ch &= m62;
+ ADD128(ch, cl, pkh, pkl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ i--;
+ } else if (remaining) {
+ nh_16(mptr, kptr, 2*((remaining+15)/16), ch, cl);
+ ch &= m62;
+ ADD128(ch, cl, pkh, pkl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ goto do_l3;
+ } else {/* Empty String */
+ ch = pkh; cl = pkl;
+ goto do_l3;
+ }
+
+ while (i--) {
+ nh_vmac_nhbytes(mptr, kptr, VMAC_NHBYTES/8, rh, rl);
+ rh &= m62;
+ poly_step(ch, cl, pkh, pkl, rh, rl);
+ mptr += (VMAC_NHBYTES/sizeof(u64));
+ }
+ if (remaining) {
+ nh_16(mptr, kptr, 2*((remaining+15)/16), rh, rl);
+ rh &= m62;
+ poly_step(ch, cl, pkh, pkl, rh, rl);
+ }
+
+do_l3:
+ vhash_abort(ctx);
+ remaining *= 8;
+ return l3hash(ch, cl, ctx->l3key[0], ctx->l3key[1], remaining);
+}
+
+static u64 vmac(unsigned char m[], unsigned int mbytes,
+ unsigned char n[16], u64 *tagl,
+ struct vmac_ctx_t *ctx)
+{
+ u64 *in_n, *out_p;
+ u64 p, h;
+ int i;
+
+ in_n = ctx->__vmac_ctx.cached_nonce;
+ out_p = ctx->__vmac_ctx.cached_aes;
+
+ i = n[15] & 1;
+ if ((*(u64 *)(n+8) != in_n[1]) || (*(u64 *)(n) != in_n[0])) {
+ in_n[0] = *(u64 *)(n);
+ in_n[1] = *(u64 *)(n+8);
+ ((unsigned char *)in_n)[15] &= 0xFE;
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out_p, (unsigned char *)in_n);
+
+ ((unsigned char *)in_n)[15] |= (unsigned char)(1-i);
+ }
+ p = be64_to_cpup(out_p + i);
+ h = vhash(m, mbytes, (u64 *)0, &ctx->__vmac_ctx);
+ return p + h;
+}
+
+static int vmac_set_key(unsigned char user_key[], struct vmac_ctx_t *ctx)
+{
+ u64 in[2] = {0}, out[2];
+ unsigned i;
+ int err = 0;
+
+ err = crypto_cipher_setkey(ctx->child, user_key, VMAC_KEY_LEN);
+ if (err)
+ return err;
+
+ /* Fill nh key */
+ ((unsigned char *)in)[0] = 0x80;
+ for (i = 0; i < sizeof(ctx->__vmac_ctx.nhkey)/8; i += 2) {
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out, (unsigned char *)in);
+ ctx->__vmac_ctx.nhkey[i] = be64_to_cpup(out);
+ ctx->__vmac_ctx.nhkey[i+1] = be64_to_cpup(out+1);
+ ((unsigned char *)in)[15] += 1;
+ }
+
+ /* Fill poly key */
+ ((unsigned char *)in)[0] = 0xC0;
+ in[1] = 0;
+ for (i = 0; i < sizeof(ctx->__vmac_ctx.polykey)/8; i += 2) {
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out, (unsigned char *)in);
+ ctx->__vmac_ctx.polytmp[i] =
+ ctx->__vmac_ctx.polykey[i] =
+ be64_to_cpup(out) & mpoly;
+ ctx->__vmac_ctx.polytmp[i+1] =
+ ctx->__vmac_ctx.polykey[i+1] =
+ be64_to_cpup(out+1) & mpoly;
+ ((unsigned char *)in)[15] += 1;
+ }
+
+ /* Fill ip key */
+ ((unsigned char *)in)[0] = 0xE0;
+ in[1] = 0;
+ for (i = 0; i < sizeof(ctx->__vmac_ctx.l3key)/8; i += 2) {
+ do {
+ crypto_cipher_encrypt_one(ctx->child,
+ (unsigned char *)out, (unsigned char *)in);
+ ctx->__vmac_ctx.l3key[i] = be64_to_cpup(out);
+ ctx->__vmac_ctx.l3key[i+1] = be64_to_cpup(out+1);
+ ((unsigned char *)in)[15] += 1;
+ } while (ctx->__vmac_ctx.l3key[i] >= p64
+ || ctx->__vmac_ctx.l3key[i+1] >= p64);
+ }
+
+ /* Invalidate nonce/aes cache and reset other elements */
+ ctx->__vmac_ctx.cached_nonce[0] = (u64)-1; /* Ensure illegal nonce */
+ ctx->__vmac_ctx.cached_nonce[1] = (u64)0; /* Ensure illegal nonce */
+ ctx->__vmac_ctx.first_block_processed = 0;
+
+ return err;
+}
+
+static int vmac_setkey(struct crypto_shash *parent,
+ const u8 *key, unsigned int keylen)
+{
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+
+ if (keylen != VMAC_KEY_LEN) {
+ crypto_shash_set_flags(parent, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ return vmac_set_key((u8 *)key, ctx);
+}
+
+static int vmac_init(struct shash_desc *pdesc)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+
+ memset(&ctx->__vmac_ctx, 0, sizeof(struct vmac_ctx));
+ return 0;
+}
+
+static int vmac_update(struct shash_desc *pdesc, const u8 *p,
+ unsigned int len)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+
+ vhash_update(p, len, &ctx->__vmac_ctx);
+
+ return 0;
+}
+
+static int vmac_final(struct shash_desc *pdesc, u8 *out)
+{
+ struct crypto_shash *parent = pdesc->tfm;
+ struct vmac_ctx_t *ctx = crypto_shash_ctx(parent);
+ vmac_t mac;
+ u8 nonce[16] = {};
+
+ mac = vmac(NULL, 0, nonce, NULL, ctx);
+ memcpy(out, &mac, sizeof(vmac_t));
+ memset(&mac, 0, sizeof(vmac_t));
+ memset(&ctx->__vmac_ctx, 0, sizeof(struct vmac_ctx));
+ return 0;
+}
+
+static int vmac_init_tfm(struct crypto_tfm *tfm)
+{
+ struct crypto_cipher *cipher;
+ struct crypto_instance *inst = (void *)tfm->__crt_alg;
+ struct crypto_spawn *spawn = crypto_instance_ctx(inst);
+ struct vmac_ctx_t *ctx = crypto_tfm_ctx(tfm);
+
+ cipher = crypto_spawn_cipher(spawn);
+ if (IS_ERR(cipher))
+ return PTR_ERR(cipher);
+
+ ctx->child = cipher;
+ return 0;
+}
+
+static void vmac_exit_tfm(struct crypto_tfm *tfm)
+{
+ struct vmac_ctx_t *ctx = crypto_tfm_ctx(tfm);
+ crypto_free_cipher(ctx->child);
+}
+
+static int vmac_create(struct crypto_template *tmpl, struct rtattr **tb)
+{
+ struct shash_instance *inst;
+ struct crypto_alg *alg;
+ int err;
+
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_SHASH);
+ if (err)
+ return err;
+
+ alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_CIPHER,
+ CRYPTO_ALG_TYPE_MASK);
+ if (IS_ERR(alg))
+ return PTR_ERR(alg);
+
+ inst = shash_alloc_instance("vmac", alg);
+ err = PTR_ERR(inst);
+ if (IS_ERR(inst))
+ goto out_put_alg;
+
+ err = crypto_init_spawn(shash_instance_ctx(inst), alg,
+ shash_crypto_instance(inst),
+ CRYPTO_ALG_TYPE_MASK);
+ if (err)
+ goto out_free_inst;
+
+ inst->alg.base.cra_priority = alg->cra_priority;
+ inst->alg.base.cra_blocksize = alg->cra_blocksize;
+ inst->alg.base.cra_alignmask = alg->cra_alignmask;
+
+ inst->alg.digestsize = sizeof(vmac_t);
+ inst->alg.base.cra_ctxsize = sizeof(struct vmac_ctx_t);
+ inst->alg.base.cra_init = vmac_init_tfm;
+ inst->alg.base.cra_exit = vmac_exit_tfm;
+
+ inst->alg.init = vmac_init;
+ inst->alg.update = vmac_update;
+ inst->alg.final = vmac_final;
+ inst->alg.setkey = vmac_setkey;
+
+ err = shash_register_instance(tmpl, inst);
+ if (err) {
+out_free_inst:
+ shash_free_instance(shash_crypto_instance(inst));
+ }
+
+out_put_alg:
+ crypto_mod_put(alg);
+ return err;
+}
+
+static struct crypto_template vmac_tmpl = {
+ .name = "vmac",
+ .create = vmac_create,
+ .free = shash_free_instance,
+ .module = THIS_MODULE,
+};
+
+static int __init vmac_module_init(void)
+{
+ return crypto_register_template(&vmac_tmpl);
+}
+
+static void __exit vmac_module_exit(void)
+{
+ crypto_unregister_template(&vmac_tmpl);
+}
+
+module_init(vmac_module_init);
+module_exit(vmac_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VMAC hash algorithm");
+
diff --git a/crypto/xcbc.c b/crypto/xcbc.c
index b63b633..bb7b67f 100644
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -19,211 +19,142 @@
* Kazunori Miyazawa <miyazawa@linux-ipv6.org>
*/
-#include <crypto/scatterwalk.h>
-#include <linux/crypto.h>
+#include <crypto/internal/hash.h>
#include <linux/err.h>
-#include <linux/hardirq.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/rtnetlink.h>
-#include <linux/slab.h>
-#include <linux/scatterlist.h>
static u_int32_t ks[12] = {0x01010101, 0x01010101, 0x01010101, 0x01010101,
0x02020202, 0x02020202, 0x02020202, 0x02020202,
0x03030303, 0x03030303, 0x03030303, 0x03030303};
+
/*
* +------------------------
* | <parent tfm>
* +------------------------
- * | crypto_xcbc_ctx
+ * | xcbc_tfm_ctx
+ * +------------------------
+ * | consts (block size * 2)
+ * +------------------------
+ */
+struct xcbc_tfm_ctx {
+ struct crypto_cipher *child;
+ u8 ctx[];
+};
+
+/*
+ * +------------------------
+ * | <shash desc>
+ * +------------------------
+ * | xcbc_desc_ctx
* +------------------------
* | odds (block size)
* +------------------------
* | prev (block size)
* +------------------------
- * | key (block size)
- * +------------------------
- * | consts (block size * 3)
- * +------------------------
*/
-struct crypto_xcbc_ctx {
- struct crypto_cipher *child;
- u8 *odds;
- u8 *prev;
- u8 *key;
- u8 *consts;
- void (*xor)(u8 *a, const u8 *b, unsigned int bs);
- unsigned int keylen;
+struct xcbc_desc_ctx {
unsigned int len;
+ u8 ctx[];
};
-static void xor_128(u8 *a, const u8 *b, unsigned int bs)
+static int crypto_xcbc_digest_setkey(struct crypto_shash *parent,
+ const u8 *inkey, unsigned int keylen)
{
- ((u32 *)a)[0] ^= ((u32 *)b)[0];
- ((u32 *)a)[1] ^= ((u32 *)b)[1];
- ((u32 *)a)[2] ^= ((u32 *)b)[2];
- ((u32 *)a)[3] ^= ((u32 *)b)[3];
-}
-
-static int _crypto_xcbc_digest_setkey(struct crypto_hash *parent,
- struct crypto_xcbc_ctx *ctx)
-{
- int bs = crypto_hash_blocksize(parent);
+ unsigned long alignmask = crypto_shash_alignmask(parent);
+ struct xcbc_tfm_ctx *ctx = crypto_shash_ctx(parent);
+ int bs = crypto_shash_blocksize(parent);
+ u8 *consts = PTR_ALIGN(&ctx->ctx[0], alignmask + 1);
int err = 0;
u8 key1[bs];
- if ((err = crypto_cipher_setkey(ctx->child, ctx->key, ctx->keylen)))
- return err;
+ if ((err = crypto_cipher_setkey(ctx->child, inkey, keylen)))
+ return err;
- crypto_cipher_encrypt_one(ctx->child, key1, ctx->consts);
+ crypto_cipher_encrypt_one(ctx->child, consts, (u8 *)ks + bs);
+ crypto_cipher_encrypt_one(ctx->child, consts + bs, (u8 *)ks + bs * 2);
+ crypto_cipher_encrypt_one(ctx->child, key1, (u8 *)ks);
return crypto_cipher_setkey(ctx->child, key1, bs);
+
}
-static int crypto_xcbc_digest_setkey(struct crypto_hash *parent,
- const u8 *inkey, unsigned int keylen)
+static int crypto_xcbc_digest_init(struct shash_desc *pdesc)
{
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
-
- if (keylen != crypto_cipher_blocksize(ctx->child))
- return -EINVAL;
-
- ctx->keylen = keylen;
- memcpy(ctx->key, inkey, keylen);
- ctx->consts = (u8*)ks;
-
- return _crypto_xcbc_digest_setkey(parent, ctx);
-}
-
-static int crypto_xcbc_digest_init(struct hash_desc *pdesc)
-{
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(pdesc->tfm);
- int bs = crypto_hash_blocksize(pdesc->tfm);
+ unsigned long alignmask = crypto_shash_alignmask(pdesc->tfm);
+ struct xcbc_desc_ctx *ctx = shash_desc_ctx(pdesc);
+ int bs = crypto_shash_blocksize(pdesc->tfm);
+ u8 *prev = PTR_ALIGN(&ctx->ctx[0], alignmask + 1) + bs;
ctx->len = 0;
- memset(ctx->odds, 0, bs);
- memset(ctx->prev, 0, bs);
+ memset(prev, 0, bs);
return 0;
}
-static int crypto_xcbc_digest_update2(struct hash_desc *pdesc,
- struct scatterlist *sg,
- unsigned int nbytes)
+static int crypto_xcbc_digest_update(struct shash_desc *pdesc, const u8 *p,
+ unsigned int len)
{
- struct crypto_hash *parent = pdesc->tfm;
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
- struct crypto_cipher *tfm = ctx->child;
- int bs = crypto_hash_blocksize(parent);
+ struct crypto_shash *parent = pdesc->tfm;
+ unsigned long alignmask = crypto_shash_alignmask(parent);
+ struct xcbc_tfm_ctx *tctx = crypto_shash_ctx(parent);
+ struct xcbc_desc_ctx *ctx = shash_desc_ctx(pdesc);
+ struct crypto_cipher *tfm = tctx->child;
+ int bs = crypto_shash_blocksize(parent);
+ u8 *odds = PTR_ALIGN(&ctx->ctx[0], alignmask + 1);
+ u8 *prev = odds + bs;
- for (;;) {
- struct page *pg = sg_page(sg);
- unsigned int offset = sg->offset;
- unsigned int slen = sg->length;
+ /* checking the data can fill the block */
+ if ((ctx->len + len) <= bs) {
+ memcpy(odds + ctx->len, p, len);
+ ctx->len += len;
+ return 0;
+ }
- if (unlikely(slen > nbytes))
- slen = nbytes;
+ /* filling odds with new data and encrypting it */
+ memcpy(odds + ctx->len, p, bs - ctx->len);
+ len -= bs - ctx->len;
+ p += bs - ctx->len;
- nbytes -= slen;
+ crypto_xor(prev, odds, bs);
+ crypto_cipher_encrypt_one(tfm, prev, prev);
- while (slen > 0) {
- unsigned int len = min(slen, ((unsigned int)(PAGE_SIZE)) - offset);
- char *p = crypto_kmap(pg, 0) + offset;
+ /* clearing the length */
+ ctx->len = 0;
- /* checking the data can fill the block */
- if ((ctx->len + len) <= bs) {
- memcpy(ctx->odds + ctx->len, p, len);
- ctx->len += len;
- slen -= len;
+ /* encrypting the rest of data */
+ while (len > bs) {
+ crypto_xor(prev, p, bs);
+ crypto_cipher_encrypt_one(tfm, prev, prev);
+ p += bs;
+ len -= bs;
+ }
- /* checking the rest of the page */
- if (len + offset >= PAGE_SIZE) {
- offset = 0;
- pg++;
- } else
- offset += len;
-
- crypto_kunmap(p, 0);
- crypto_yield(pdesc->flags);
- continue;
- }
-
- /* filling odds with new data and encrypting it */
- memcpy(ctx->odds + ctx->len, p, bs - ctx->len);
- len -= bs - ctx->len;
- p += bs - ctx->len;
-
- ctx->xor(ctx->prev, ctx->odds, bs);
- crypto_cipher_encrypt_one(tfm, ctx->prev, ctx->prev);
-
- /* clearing the length */
- ctx->len = 0;
-
- /* encrypting the rest of data */
- while (len > bs) {
- ctx->xor(ctx->prev, p, bs);
- crypto_cipher_encrypt_one(tfm, ctx->prev,
- ctx->prev);
- p += bs;
- len -= bs;
- }
-
- /* keeping the surplus of blocksize */
- if (len) {
- memcpy(ctx->odds, p, len);
- ctx->len = len;
- }
- crypto_kunmap(p, 0);
- crypto_yield(pdesc->flags);
- slen -= min(slen, ((unsigned int)(PAGE_SIZE)) - offset);
- offset = 0;
- pg++;
- }
-
- if (!nbytes)
- break;
- sg = scatterwalk_sg_next(sg);
+ /* keeping the surplus of blocksize */
+ if (len) {
+ memcpy(odds, p, len);
+ ctx->len = len;
}
return 0;
}
-static int crypto_xcbc_digest_update(struct hash_desc *pdesc,
- struct scatterlist *sg,
- unsigned int nbytes)
+static int crypto_xcbc_digest_final(struct shash_desc *pdesc, u8 *out)
{
- if (WARN_ON_ONCE(in_irq()))
- return -EDEADLK;
- return crypto_xcbc_digest_update2(pdesc, sg, nbytes);
-}
+ struct crypto_shash *parent = pdesc->tfm;
+ unsigned long alignmask = crypto_shash_alignmask(parent);
+ struct xcbc_tfm_ctx *tctx = crypto_shash_ctx(parent);
+ struct xcbc_desc_ctx *ctx = shash_desc_ctx(pdesc);
+ struct crypto_cipher *tfm = tctx->child;
+ int bs = crypto_shash_blocksize(parent);
+ u8 *consts = PTR_ALIGN(&tctx->ctx[0], alignmask + 1);
+ u8 *odds = PTR_ALIGN(&ctx->ctx[0], alignmask + 1);
+ u8 *prev = odds + bs;
+ unsigned int offset = 0;
-static int crypto_xcbc_digest_final(struct hash_desc *pdesc, u8 *out)
-{
- struct crypto_hash *parent = pdesc->tfm;
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
- struct crypto_cipher *tfm = ctx->child;
- int bs = crypto_hash_blocksize(parent);
- int err = 0;
-
- if (ctx->len == bs) {
- u8 key2[bs];
-
- if ((err = crypto_cipher_setkey(tfm, ctx->key, ctx->keylen)) != 0)
- return err;
-
- crypto_cipher_encrypt_one(tfm, key2,
- (u8 *)(ctx->consts + bs));
-
- ctx->xor(ctx->prev, ctx->odds, bs);
- ctx->xor(ctx->prev, key2, bs);
- _crypto_xcbc_digest_setkey(parent, ctx);
-
- crypto_cipher_encrypt_one(tfm, out, ctx->prev);
- } else {
- u8 key3[bs];
+ if (ctx->len != bs) {
unsigned int rlen;
- u8 *p = ctx->odds + ctx->len;
+ u8 *p = odds + ctx->len;
+
*p = 0x80;
p++;
@@ -231,128 +162,111 @@
if (rlen)
memset(p, 0, rlen);
- if ((err = crypto_cipher_setkey(tfm, ctx->key, ctx->keylen)) != 0)
- return err;
-
- crypto_cipher_encrypt_one(tfm, key3,
- (u8 *)(ctx->consts + bs * 2));
-
- ctx->xor(ctx->prev, ctx->odds, bs);
- ctx->xor(ctx->prev, key3, bs);
-
- _crypto_xcbc_digest_setkey(parent, ctx);
-
- crypto_cipher_encrypt_one(tfm, out, ctx->prev);
+ offset += bs;
}
+ crypto_xor(prev, odds, bs);
+ crypto_xor(prev, consts + offset, bs);
+
+ crypto_cipher_encrypt_one(tfm, out, prev);
+
return 0;
}
-static int crypto_xcbc_digest(struct hash_desc *pdesc,
- struct scatterlist *sg, unsigned int nbytes, u8 *out)
-{
- if (WARN_ON_ONCE(in_irq()))
- return -EDEADLK;
-
- crypto_xcbc_digest_init(pdesc);
- crypto_xcbc_digest_update2(pdesc, sg, nbytes);
- return crypto_xcbc_digest_final(pdesc, out);
-}
-
static int xcbc_init_tfm(struct crypto_tfm *tfm)
{
struct crypto_cipher *cipher;
struct crypto_instance *inst = (void *)tfm->__crt_alg;
struct crypto_spawn *spawn = crypto_instance_ctx(inst);
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(__crypto_hash_cast(tfm));
- int bs = crypto_hash_blocksize(__crypto_hash_cast(tfm));
+ struct xcbc_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
cipher = crypto_spawn_cipher(spawn);
if (IS_ERR(cipher))
return PTR_ERR(cipher);
- switch(bs) {
- case 16:
- ctx->xor = xor_128;
- break;
- default:
- return -EINVAL;
- }
-
ctx->child = cipher;
- ctx->odds = (u8*)(ctx+1);
- ctx->prev = ctx->odds + bs;
- ctx->key = ctx->prev + bs;
return 0;
};
static void xcbc_exit_tfm(struct crypto_tfm *tfm)
{
- struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(__crypto_hash_cast(tfm));
+ struct xcbc_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
crypto_free_cipher(ctx->child);
}
-static struct crypto_instance *xcbc_alloc(struct rtattr **tb)
+static int xcbc_create(struct crypto_template *tmpl, struct rtattr **tb)
{
- struct crypto_instance *inst;
+ struct shash_instance *inst;
struct crypto_alg *alg;
+ unsigned long alignmask;
int err;
- err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_HASH);
+ err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_SHASH);
if (err)
- return ERR_PTR(err);
+ return err;
alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_CIPHER,
CRYPTO_ALG_TYPE_MASK);
if (IS_ERR(alg))
- return ERR_CAST(alg);
+ return PTR_ERR(alg);
switch(alg->cra_blocksize) {
case 16:
break;
default:
- inst = ERR_PTR(-EINVAL);
goto out_put_alg;
}
- inst = crypto_alloc_instance("xcbc", alg);
+ inst = shash_alloc_instance("xcbc", alg);
+ err = PTR_ERR(inst);
if (IS_ERR(inst))
goto out_put_alg;
- inst->alg.cra_flags = CRYPTO_ALG_TYPE_HASH;
- inst->alg.cra_priority = alg->cra_priority;
- inst->alg.cra_blocksize = alg->cra_blocksize;
- inst->alg.cra_alignmask = alg->cra_alignmask;
- inst->alg.cra_type = &crypto_hash_type;
+ err = crypto_init_spawn(shash_instance_ctx(inst), alg,
+ shash_crypto_instance(inst),
+ CRYPTO_ALG_TYPE_MASK);
+ if (err)
+ goto out_free_inst;
- inst->alg.cra_hash.digestsize = alg->cra_blocksize;
- inst->alg.cra_ctxsize = sizeof(struct crypto_xcbc_ctx) +
- ALIGN(inst->alg.cra_blocksize * 3, sizeof(void *));
- inst->alg.cra_init = xcbc_init_tfm;
- inst->alg.cra_exit = xcbc_exit_tfm;
+ alignmask = alg->cra_alignmask | 3;
+ inst->alg.base.cra_alignmask = alignmask;
+ inst->alg.base.cra_priority = alg->cra_priority;
+ inst->alg.base.cra_blocksize = alg->cra_blocksize;
- inst->alg.cra_hash.init = crypto_xcbc_digest_init;
- inst->alg.cra_hash.update = crypto_xcbc_digest_update;
- inst->alg.cra_hash.final = crypto_xcbc_digest_final;
- inst->alg.cra_hash.digest = crypto_xcbc_digest;
- inst->alg.cra_hash.setkey = crypto_xcbc_digest_setkey;
+ inst->alg.digestsize = alg->cra_blocksize;
+ inst->alg.descsize = ALIGN(sizeof(struct xcbc_desc_ctx),
+ crypto_tfm_ctx_alignment()) +
+ (alignmask &
+ ~(crypto_tfm_ctx_alignment() - 1)) +
+ alg->cra_blocksize * 2;
+
+ inst->alg.base.cra_ctxsize = ALIGN(sizeof(struct xcbc_tfm_ctx),
+ alignmask + 1) +
+ alg->cra_blocksize * 2;
+ inst->alg.base.cra_init = xcbc_init_tfm;
+ inst->alg.base.cra_exit = xcbc_exit_tfm;
+
+ inst->alg.init = crypto_xcbc_digest_init;
+ inst->alg.update = crypto_xcbc_digest_update;
+ inst->alg.final = crypto_xcbc_digest_final;
+ inst->alg.setkey = crypto_xcbc_digest_setkey;
+
+ err = shash_register_instance(tmpl, inst);
+ if (err) {
+out_free_inst:
+ shash_free_instance(shash_crypto_instance(inst));
+ }
out_put_alg:
crypto_mod_put(alg);
- return inst;
-}
-
-static void xcbc_free(struct crypto_instance *inst)
-{
- crypto_drop_spawn(crypto_instance_ctx(inst));
- kfree(inst);
+ return err;
}
static struct crypto_template crypto_xcbc_tmpl = {
.name = "xcbc",
- .alloc = xcbc_alloc,
- .free = xcbc_free,
+ .create = xcbc_create,
+ .free = shash_free_instance,
.module = THIS_MODULE,
};
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index 67340cc..257706e 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -70,6 +70,12 @@
ACPI_FUNCTION_TRACE_PTR(ex_store_buffer_to_buffer, source_desc);
+ /* If Source and Target are the same, just return */
+
+ if (source_desc == target_desc) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* We know that source_desc is a buffer by now */
buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
@@ -161,6 +167,12 @@
ACPI_FUNCTION_TRACE_PTR(ex_store_string_to_string, source_desc);
+ /* If Source and Target are the same, just return */
+
+ if (source_desc == target_desc) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
/* We know that source_desc is a string by now */
buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index f6baa77..0c4ca4d 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -78,9 +78,10 @@
static int __init blacklist_by_year(void)
{
- int year = dmi_get_year(DMI_BIOS_DATE);
+ int year;
+
/* Doesn't exist? Likely an old system */
- if (year == -1) {
+ if (!dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL)) {
printk(KERN_ERR PREFIX "no DMI BIOS year, "
"acpi=force is required to enable ACPI\n" );
return 1;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 84e0f3c..2cc4b30 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1151,6 +1151,9 @@
{
int result = 0;
+ if (acpi_disabled)
+ return 0;
+
memset(&errata, 0, sizeof(errata));
#ifdef CONFIG_SMP
@@ -1197,6 +1200,9 @@
static void __exit acpi_processor_exit(void)
{
+ if (acpi_disabled)
+ return;
+
acpi_processor_ppc_exit();
acpi_thermal_cpufreq_exit();
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 0efa59e..66393d5 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -162,8 +162,9 @@
pr->power.timer_broadcast_on_state = state;
}
-static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(void *arg)
{
+ struct acpi_processor *pr = (struct acpi_processor *) arg;
unsigned long reason;
reason = pr->power.timer_broadcast_on_state < INT_MAX ?
@@ -635,7 +636,8 @@
working++;
}
- lapic_timer_propagate_broadcast(pr);
+ smp_call_function_single(pr->id, lapic_timer_propagate_broadcast,
+ pr, 1);
return (working);
}
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 39838c6..31adda1 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -66,7 +66,7 @@
if (pr->limit.thermal.tx > tx)
tx = pr->limit.thermal.tx;
- result = acpi_processor_set_throttling(pr, tx);
+ result = acpi_processor_set_throttling(pr, tx, false);
if (result)
goto end;
}
@@ -421,12 +421,12 @@
if (state <= max_pstate) {
if (pr->flags.throttling && pr->throttling.state)
- result = acpi_processor_set_throttling(pr, 0);
+ result = acpi_processor_set_throttling(pr, 0, false);
cpufreq_set_cur_state(pr->id, state);
} else {
cpufreq_set_cur_state(pr->id, max_pstate);
result = acpi_processor_set_throttling(pr,
- state - max_pstate);
+ state - max_pstate, false);
}
return result;
}
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 2275437..ae39797 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -62,7 +62,8 @@
#define THROTTLING_POSTCHANGE (2)
static int acpi_processor_get_throttling(struct acpi_processor *pr);
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force);
static int acpi_processor_update_tsd_coord(void)
{
@@ -361,7 +362,7 @@
*/
target_state = throttling_limit;
}
- return acpi_processor_set_throttling(pr, target_state);
+ return acpi_processor_set_throttling(pr, target_state, false);
}
/*
@@ -839,10 +840,10 @@
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
- ACPI_WARNING((AE_INFO,
- "Invalid throttling state, reset"));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Invalid throttling state, reset\n"));
state = 0;
- ret = acpi_processor_set_throttling(pr, state);
+ ret = acpi_processor_set_throttling(pr, state, true);
if (ret)
return ret;
}
@@ -915,7 +916,7 @@
}
static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr,
- int state)
+ int state, bool force)
{
u32 value = 0;
u32 duty_mask = 0;
@@ -930,7 +931,7 @@
if (!pr->flags.throttling)
return -ENODEV;
- if (state == pr->throttling.state)
+ if (!force && (state == pr->throttling.state))
return 0;
if (state < pr->throttling_platform_limit)
@@ -988,7 +989,7 @@
}
static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
- int state)
+ int state, bool force)
{
int ret;
acpi_integer value;
@@ -1002,7 +1003,7 @@
if (!pr->flags.throttling)
return -ENODEV;
- if (state == pr->throttling.state)
+ if (!force && (state == pr->throttling.state))
return 0;
if (state < pr->throttling_platform_limit)
@@ -1018,7 +1019,8 @@
return 0;
}
-int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
+int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force)
{
cpumask_var_t saved_mask;
int ret = 0;
@@ -1070,7 +1072,7 @@
/* FIXME: use work_on_cpu() */
set_cpus_allowed_ptr(current, cpumask_of(pr->id));
ret = p_throttling->acpi_processor_set_throttling(pr,
- t_state.target_state);
+ t_state.target_state, force);
} else {
/*
* When the T-state coordination is SW_ALL or HW_ALL,
@@ -1103,7 +1105,7 @@
set_cpus_allowed_ptr(current, cpumask_of(i));
ret = match_pr->throttling.
acpi_processor_set_throttling(
- match_pr, t_state.target_state);
+ match_pr, t_state.target_state, force);
}
}
/*
@@ -1201,7 +1203,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Disabling throttling (was T%d)\n",
pr->throttling.state));
- result = acpi_processor_set_throttling(pr, 0);
+ result = acpi_processor_set_throttling(pr, 0, false);
if (result)
goto end;
}
@@ -1307,7 +1309,7 @@
if (strcmp(tmpbuf, charp) != 0)
return -EINVAL;
- result = acpi_processor_set_throttling(pr, state_val);
+ result = acpi_processor_set_throttling(pr, state_val, false);
if (result)
return result;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 8851315..60ea984c 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -2004,8 +2004,11 @@
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
- sysfs_remove_link(&device->backlight->dev.kobj, "device");
- backlight_device_unregister(device->backlight);
+ if (device->backlight) {
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
+ backlight_device_unregister(device->backlight);
+ device->backlight = NULL;
+ }
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
"thermal_cooling");
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 2466506..f60b2b6 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -204,6 +204,7 @@
int amba_device_register(struct amba_device *dev, struct resource *parent)
{
u32 pid, cid;
+ u32 size;
void __iomem *tmp;
int i, ret;
@@ -229,16 +230,25 @@
if (ret)
goto err_out;
- tmp = ioremap(dev->res.start, SZ_4K);
+ /*
+ * Dynamically calculate the size of the resource
+ * and use this for iomap
+ */
+ size = resource_size(&dev->res);
+ tmp = ioremap(dev->res.start, size);
if (!tmp) {
ret = -ENOMEM;
goto err_release;
}
+ /*
+ * Read pid and cid based on size of resource
+ * they are located at end of region
+ */
for (pid = 0, i = 0; i < 4; i++)
- pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8);
+ pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
for (cid = 0, i = 0; i < 4; i++)
- cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8);
+ cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
iounmap(tmp);
@@ -353,11 +363,14 @@
int amba_request_regions(struct amba_device *dev, const char *name)
{
int ret = 0;
+ u32 size;
if (!name)
name = dev->dev.driver->name;
- if (!request_mem_region(dev->res.start, SZ_4K, name))
+ size = resource_size(&dev->res);
+
+ if (!request_mem_region(dev->res.start, size, name))
ret = -EBUSY;
return ret;
@@ -371,7 +384,10 @@
*/
void amba_release_regions(struct amba_device *dev)
{
- release_mem_region(dev->res.start, SZ_4K);
+ u32 size;
+
+ size = resource_size(&dev->res);
+ release_mem_region(dev->res.start, size);
}
EXPORT_SYMBOL(amba_driver_register);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b17c57f..ab2fa4e 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -26,6 +26,17 @@
bool
default n
+config ATA_VERBOSE_ERROR
+ bool "Verbose ATA error reporting"
+ default y
+ help
+ This option adds parsing of ATA command descriptions and error bits
+ in libata kernel output, making it easier to interpret.
+ This option will enlarge the kernel by approx. 6KB. Disable it only
+ if kernel size is more important than ease of debugging.
+
+ If unsure, say Y.
+
config ATA_ACPI
bool "ATA ACPI Support"
depends on ACPI && PCI
@@ -586,6 +597,16 @@
If unsure, say N.
+config PATA_RDC
+ tristate "RDC PATA support"
+ depends on PCI
+ help
+ This option enables basic support for the later RDC PATA controllers
+ controllers via the new ATA layer. For the RDC 1010, you need to
+ enable the IT821X driver instead.
+
+ If unsure, say N.
+
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 38906f9..463eb52 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -57,6 +57,7 @@
obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
+obj-$(CONFIG_PATA_RDC) += pata_rdc.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fe3eba5..d4cd9c2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -329,10 +329,24 @@
enum sw_activity val);
static void ahci_init_sw_activity(struct ata_link *link);
+static ssize_t ahci_show_host_caps(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_version(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_port_cmd(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
+DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
+
static struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_link_power_management_policy,
&dev_attr_em_message_type,
&dev_attr_em_message,
+ &dev_attr_ahci_host_caps,
+ &dev_attr_ahci_host_version,
+ &dev_attr_ahci_port_cmd,
NULL
};
@@ -539,6 +553,12 @@
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
+ /* AMD */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */
+ /* AMD is using RAID class only for ahci controllers */
+ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
+
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
@@ -702,6 +722,36 @@
WARN_ON(1);
}
+static ssize_t ahci_show_host_caps(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap);
+}
+
+static ssize_t ahci_show_host_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+
+ return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
+}
+
+static ssize_t ahci_show_port_cmd(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ void __iomem *port_mmio = ahci_port_base(ap);
+
+ return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
+}
+
/**
* ahci_save_initial_config - Save and fixup initial config values
* @pdev: target PCI device
@@ -1584,7 +1634,7 @@
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
}
-static int ahci_kick_engine(struct ata_port *ap, int force_restart)
+static int ahci_kick_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1592,18 +1642,16 @@
u32 tmp;
int busy, rc;
- /* do we need to kick the port? */
- busy = status & (ATA_BUSY | ATA_DRQ);
- if (!busy && !force_restart)
- return 0;
-
/* stop engine */
rc = ahci_stop_engine(ap);
if (rc)
goto out_restart;
- /* need to do CLO? */
- if (!busy) {
+ /* need to do CLO?
+ * always do CLO if PMP is attached (AHCI-1.3 9.2)
+ */
+ busy = status & (ATA_BUSY | ATA_DRQ);
+ if (!busy && !sata_pmp_attached(ap)) {
rc = 0;
goto out_restart;
}
@@ -1651,7 +1699,7 @@
tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1, timeout_msec);
if (tmp & 0x1) {
- ahci_kick_engine(ap, 1);
+ ahci_kick_engine(ap);
return -EBUSY;
}
} else
@@ -1674,7 +1722,7 @@
DPRINTK("ENTER\n");
/* prepare for SRST (AHCI-1.1 10.4.1) */
- rc = ahci_kick_engine(ap, 1);
+ rc = ahci_kick_engine(ap);
if (rc && rc != -EOPNOTSUPP)
ata_link_printk(link, KERN_WARNING,
"failed to reset engine (errno=%d)\n", rc);
@@ -1890,7 +1938,7 @@
rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
ahci_check_ready);
if (rc)
- ahci_kick_engine(ap, 0);
+ ahci_kick_engine(ap);
}
return rc;
}
@@ -2271,7 +2319,7 @@
/* make DMA engine forget about the failed command */
if (qc->flags & ATA_QCFLAG_FAILED)
- ahci_kick_engine(ap, 1);
+ ahci_kick_engine(ap);
}
static void ahci_pmp_attach(struct ata_port *ap)
@@ -2603,14 +2651,18 @@
}
/*
- * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older
- * BIOS. The oldest version known to be broken is 0901 and working is
- * 1501 which was released on 2007-10-26. Force 32bit DMA on anything
- * older than 1501. Please read bko#9412 for more info.
+ * SB600 ahci controller on certain boards can't do 64bit DMA with
+ * older BIOS.
*/
-static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev)
+static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
{
static const struct dmi_system_id sysids[] = {
+ /*
+ * The oldest version known to be broken is 0901 and
+ * working is 1501 which was released on 2007-10-26.
+ * Force 32bit DMA on anything older than 1501.
+ * Please read bko#9412 for more info.
+ */
{
.ident = "ASUS M2A-VM",
.matches = {
@@ -2618,31 +2670,48 @@
"ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"),
},
+ .driver_data = "20071026", /* yyyymmdd */
+ },
+ /*
+ * It's yet unknown whether more recent BIOS fixes the
+ * problem. Blacklist the whole board for the time
+ * being. Please read the following thread for more
+ * info.
+ *
+ * http://thread.gmane.org/gmane.linux.ide/42326
+ */
+ {
+ .ident = "Gigabyte GA-MA69VM-S2",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "GA-MA69VM-S2"),
+ },
},
{ }
};
- const char *cutoff_mmdd = "10/26";
- const char *date;
- int year;
+ const struct dmi_system_id *match;
+ match = dmi_first_match(sysids);
if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
- !dmi_check_system(sysids))
+ !match)
return false;
- /*
- * Argh.... both version and date are free form strings.
- * Let's hope they're using the same date format across
- * different versions.
- */
- date = dmi_get_system_info(DMI_BIOS_DATE);
- year = dmi_get_year(DMI_BIOS_DATE);
- if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' &&
- (year > 2007 ||
- (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0)))
- return false;
+ if (match->driver_data) {
+ int year, month, date;
+ char buf[9];
- dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, "
- "forcing 32bit DMA, update BIOS\n");
+ dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+ snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
+
+ if (strcmp(buf, match->driver_data) >= 0)
+ return false;
+
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
+ "forcing 32bit DMA, update BIOS\n", match->ident);
+ } else
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: this board can't "
+ "do 64bit DMA, forcing 32bit\n", match->ident);
return true;
}
@@ -2857,8 +2926,8 @@
if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
- /* apply ASUS M2A_VM quirk */
- if (ahci_asus_m2a_vm_32bit_only(pdev))
+ /* apply sb600 32bit only quirk */
+ if (ahci_sb600_32bit_only(pdev))
hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
@@ -2869,7 +2938,7 @@
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ;
+ pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 56b8a3f..9ac4e37 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -664,6 +664,8 @@
return ata_sff_prereset(link, deadline);
}
+static DEFINE_SPINLOCK(piix_lock);
+
/**
* piix_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
@@ -677,8 +679,9 @@
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
@@ -708,6 +711,8 @@
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ spin_lock_irqsave(&piix_lock, flags);
+
/* PIO configuration clears DTE unconditionally. It will be
* programmed in set_dmamode which is guaranteed to be called
* after set_piomode if any DMA mode is available.
@@ -747,6 +752,8 @@
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
}
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
@@ -764,6 +771,7 @@
static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
@@ -777,6 +785,8 @@
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&piix_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
if (ap->udma_mask)
pci_read_config_byte(dev, 0x48, &udma_enable);
@@ -867,6 +877,8 @@
/* Don't scribble on 0x48 if the controller does not support UDMA */
if (ap->udma_mask)
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index ac176da..01964b6 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -689,6 +689,7 @@
struct ata_taskfile tf, ptf, rtf;
unsigned int err_mask;
const char *level;
+ const char *descr;
char msg[60];
int rc;
@@ -736,11 +737,13 @@
snprintf(msg, sizeof(msg), "filtered out");
rc = 0;
}
+ descr = ata_get_cmd_descript(tf.command);
ata_dev_printk(dev, level,
- "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n",
+ "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x (%s) %s\n",
tf.command, tf.feature, tf.nsect, tf.lbal,
- tf.lbam, tf.lbah, tf.device, msg);
+ tf.lbam, tf.lbah, tf.device,
+ (descr ? descr : "unknown"), msg);
return rc;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 072ba5e..df31dea 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -709,7 +709,13 @@
head = tf->device & 0xf;
sect = tf->lbal;
- block = (cyl * dev->heads + head) * dev->sectors + sect;
+ if (!sect) {
+ ata_dev_printk(dev, KERN_WARNING, "device reported "
+ "invalid CHS sector 0\n");
+ sect = 1; /* oh well */
+ }
+
+ block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
}
return block;
@@ -2299,29 +2305,49 @@
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
-static void ata_dev_config_ncq(struct ata_device *dev,
+static int ata_dev_config_ncq(struct ata_device *dev,
char *desc, size_t desc_sz)
{
struct ata_port *ap = dev->link->ap;
int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
+ unsigned int err_mask;
+ char *aa_desc = "";
if (!ata_id_has_ncq(dev->id)) {
desc[0] = '\0';
- return;
+ return 0;
}
if (dev->horkage & ATA_HORKAGE_NONCQ) {
snprintf(desc, desc_sz, "NCQ (not used)");
- return;
+ return 0;
}
if (ap->flags & ATA_FLAG_NCQ) {
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
dev->flags |= ATA_DFLAG_NCQ;
}
+ if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
+ (ap->flags & ATA_FLAG_FPDMA_AA) &&
+ ata_id_has_fpdma_aa(dev->id)) {
+ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
+ SATA_FPDMA_AA);
+ if (err_mask) {
+ ata_dev_printk(dev, KERN_ERR, "failed to enable AA"
+ "(error_mask=0x%x)\n", err_mask);
+ if (err_mask != AC_ERR_DEV) {
+ dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
+ return -EIO;
+ }
+ } else
+ aa_desc = ", AA";
+ }
+
if (hdepth >= ddepth)
- snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
else
- snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
+ ddepth, aa_desc);
+ return 0;
}
/**
@@ -2461,7 +2487,7 @@
if (ata_id_has_lba(id)) {
const char *lba_desc;
- char ncq_desc[20];
+ char ncq_desc[24];
lba_desc = "LBA";
dev->flags |= ATA_DFLAG_LBA;
@@ -2475,7 +2501,9 @@
}
/* config NCQ */
- ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ if (rc)
+ return rc;
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info) {
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 79711b6..a04488f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -40,6 +40,7 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
#include "../scsi/scsi_transport_api.h"
#include <linux/libata.h>
@@ -999,7 +1000,9 @@
* ata_port_freeze - abort & freeze port
* @ap: ATA port to freeze
*
- * Abort and freeze @ap.
+ * Abort and freeze @ap. The freeze operation must be called
+ * first, because some hardware requires special operations
+ * before the taskfile registers are accessible.
*
* LOCKING:
* spin_lock_irqsave(host lock)
@@ -1013,8 +1016,8 @@
WARN_ON(!ap->ops->error_handler);
- nr_aborted = ata_port_abort(ap);
__ata_port_freeze(ap);
+ nr_aborted = ata_port_abort(ap);
return nr_aborted;
}
@@ -2110,6 +2113,116 @@
}
/**
+ * ata_get_cmd_descript - get description for ATA command
+ * @command: ATA command code to get description for
+ *
+ * Return a textual description of the given command, or NULL if the
+ * command is not known.
+ *
+ * LOCKING:
+ * None
+ */
+const char *ata_get_cmd_descript(u8 command)
+{
+#ifdef CONFIG_ATA_VERBOSE_ERROR
+ static const struct
+ {
+ u8 command;
+ const char *text;
+ } cmd_descr[] = {
+ { ATA_CMD_DEV_RESET, "DEVICE RESET" },
+ { ATA_CMD_CHK_POWER, "CHECK POWER MODE" },
+ { ATA_CMD_STANDBY, "STANDBY" },
+ { ATA_CMD_IDLE, "IDLE" },
+ { ATA_CMD_EDD, "EXECUTE DEVICE DIAGNOSTIC" },
+ { ATA_CMD_DOWNLOAD_MICRO, "DOWNLOAD MICROCODE" },
+ { ATA_CMD_NOP, "NOP" },
+ { ATA_CMD_FLUSH, "FLUSH CACHE" },
+ { ATA_CMD_FLUSH_EXT, "FLUSH CACHE EXT" },
+ { ATA_CMD_ID_ATA, "IDENTIFY DEVICE" },
+ { ATA_CMD_ID_ATAPI, "IDENTIFY PACKET DEVICE" },
+ { ATA_CMD_SERVICE, "SERVICE" },
+ { ATA_CMD_READ, "READ DMA" },
+ { ATA_CMD_READ_EXT, "READ DMA EXT" },
+ { ATA_CMD_READ_QUEUED, "READ DMA QUEUED" },
+ { ATA_CMD_READ_STREAM_EXT, "READ STREAM EXT" },
+ { ATA_CMD_READ_STREAM_DMA_EXT, "READ STREAM DMA EXT" },
+ { ATA_CMD_WRITE, "WRITE DMA" },
+ { ATA_CMD_WRITE_EXT, "WRITE DMA EXT" },
+ { ATA_CMD_WRITE_QUEUED, "WRITE DMA QUEUED EXT" },
+ { ATA_CMD_WRITE_STREAM_EXT, "WRITE STREAM EXT" },
+ { ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" },
+ { ATA_CMD_WRITE_FUA_EXT, "WRITE DMA FUA EXT" },
+ { ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
+ { ATA_CMD_FPDMA_READ, "READ FPDMA QUEUED" },
+ { ATA_CMD_FPDMA_WRITE, "WRITE FPDMA QUEUED" },
+ { ATA_CMD_PIO_READ, "READ SECTOR(S)" },
+ { ATA_CMD_PIO_READ_EXT, "READ SECTOR(S) EXT" },
+ { ATA_CMD_PIO_WRITE, "WRITE SECTOR(S)" },
+ { ATA_CMD_PIO_WRITE_EXT, "WRITE SECTOR(S) EXT" },
+ { ATA_CMD_READ_MULTI, "READ MULTIPLE" },
+ { ATA_CMD_READ_MULTI_EXT, "READ MULTIPLE EXT" },
+ { ATA_CMD_WRITE_MULTI, "WRITE MULTIPLE" },
+ { ATA_CMD_WRITE_MULTI_EXT, "WRITE MULTIPLE EXT" },
+ { ATA_CMD_WRITE_MULTI_FUA_EXT, "WRITE MULTIPLE FUA EXT" },
+ { ATA_CMD_SET_FEATURES, "SET FEATURES" },
+ { ATA_CMD_SET_MULTI, "SET MULTIPLE MODE" },
+ { ATA_CMD_VERIFY, "READ VERIFY SECTOR(S)" },
+ { ATA_CMD_VERIFY_EXT, "READ VERIFY SECTOR(S) EXT" },
+ { ATA_CMD_WRITE_UNCORR_EXT, "WRITE UNCORRECTABLE EXT" },
+ { ATA_CMD_STANDBYNOW1, "STANDBY IMMEDIATE" },
+ { ATA_CMD_IDLEIMMEDIATE, "IDLE IMMEDIATE" },
+ { ATA_CMD_SLEEP, "SLEEP" },
+ { ATA_CMD_INIT_DEV_PARAMS, "INITIALIZE DEVICE PARAMETERS" },
+ { ATA_CMD_READ_NATIVE_MAX, "READ NATIVE MAX ADDRESS" },
+ { ATA_CMD_READ_NATIVE_MAX_EXT, "READ NATIVE MAX ADDRESS EXT" },
+ { ATA_CMD_SET_MAX, "SET MAX ADDRESS" },
+ { ATA_CMD_SET_MAX_EXT, "SET MAX ADDRESS EXT" },
+ { ATA_CMD_READ_LOG_EXT, "READ LOG EXT" },
+ { ATA_CMD_WRITE_LOG_EXT, "WRITE LOG EXT" },
+ { ATA_CMD_READ_LOG_DMA_EXT, "READ LOG DMA EXT" },
+ { ATA_CMD_WRITE_LOG_DMA_EXT, "WRITE LOG DMA EXT" },
+ { ATA_CMD_TRUSTED_RCV, "TRUSTED RECEIVE" },
+ { ATA_CMD_TRUSTED_RCV_DMA, "TRUSTED RECEIVE DMA" },
+ { ATA_CMD_TRUSTED_SND, "TRUSTED SEND" },
+ { ATA_CMD_TRUSTED_SND_DMA, "TRUSTED SEND DMA" },
+ { ATA_CMD_PMP_READ, "READ BUFFER" },
+ { ATA_CMD_PMP_WRITE, "WRITE BUFFER" },
+ { ATA_CMD_CONF_OVERLAY, "DEVICE CONFIGURATION OVERLAY" },
+ { ATA_CMD_SEC_SET_PASS, "SECURITY SET PASSWORD" },
+ { ATA_CMD_SEC_UNLOCK, "SECURITY UNLOCK" },
+ { ATA_CMD_SEC_ERASE_PREP, "SECURITY ERASE PREPARE" },
+ { ATA_CMD_SEC_ERASE_UNIT, "SECURITY ERASE UNIT" },
+ { ATA_CMD_SEC_FREEZE_LOCK, "SECURITY FREEZE LOCK" },
+ { ATA_CMD_SEC_DISABLE_PASS, "SECURITY DISABLE PASSWORD" },
+ { ATA_CMD_CONFIG_STREAM, "CONFIGURE STREAM" },
+ { ATA_CMD_SMART, "SMART" },
+ { ATA_CMD_MEDIA_LOCK, "DOOR LOCK" },
+ { ATA_CMD_MEDIA_UNLOCK, "DOOR UNLOCK" },
+ { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" },
+ { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" },
+ { ATA_CMD_CFA_WRITE_NE, "CFA WRITE SECTORS WITHOUT ERASE" },
+ { ATA_CMD_CFA_TRANS_SECT, "CFA TRANSLATE SECTOR" },
+ { ATA_CMD_CFA_ERASE, "CFA ERASE SECTORS" },
+ { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" },
+ { ATA_CMD_READ_LONG, "READ LONG (with retries)" },
+ { ATA_CMD_READ_LONG_ONCE, "READ LONG (without retries)" },
+ { ATA_CMD_WRITE_LONG, "WRITE LONG (with retries)" },
+ { ATA_CMD_WRITE_LONG_ONCE, "WRITE LONG (without retries)" },
+ { ATA_CMD_RESTORE, "RECALIBRATE" },
+ { 0, NULL } /* terminate list */
+ };
+
+ unsigned int i;
+ for (i = 0; cmd_descr[i].text; i++)
+ if (cmd_descr[i].command == command)
+ return cmd_descr[i].text;
+#endif
+
+ return NULL;
+}
+
+/**
* ata_eh_link_report - report error handling to user
* @link: ATA link EH is going on
*
@@ -2175,6 +2288,7 @@
ata_link_printk(link, KERN_ERR, "%s\n", desc);
}
+#ifdef CONFIG_ATA_VERBOSE_ERROR
if (ehc->i.serror)
ata_link_printk(link, KERN_ERR,
"SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
@@ -2195,6 +2309,7 @@
ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "");
+#endif
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
@@ -2226,14 +2341,23 @@
dma_str[qc->dma_dir]);
}
- if (ata_is_atapi(qc->tf.protocol))
- snprintf(cdb_buf, sizeof(cdb_buf),
+ if (ata_is_atapi(qc->tf.protocol)) {
+ if (qc->scsicmd)
+ scsi_print_command(qc->scsicmd);
+ else
+ snprintf(cdb_buf, sizeof(cdb_buf),
"cdb %02x %02x %02x %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x %02x %02x %02x %02x\n ",
cdb[0], cdb[1], cdb[2], cdb[3],
cdb[4], cdb[5], cdb[6], cdb[7],
cdb[8], cdb[9], cdb[10], cdb[11],
cdb[12], cdb[13], cdb[14], cdb[15]);
+ } else {
+ const char *descr = ata_get_cmd_descript(cmd->command);
+ if (descr)
+ ata_dev_printk(qc->dev, KERN_ERR,
+ "failed command: %s\n", descr);
+ }
ata_dev_printk(qc->dev, KERN_ERR,
"cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
@@ -2252,6 +2376,7 @@
res->device, qc->err_mask, ata_err_string(qc->err_mask),
qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
+#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
ATA_ERR)) {
if (res->command & ATA_BUSY)
@@ -2275,6 +2400,7 @@
res->feature & ATA_UNC ? "UNC " : "",
res->feature & ATA_IDNF ? "IDNF " : "",
res->feature & ATA_ABORTED ? "ABRT " : "");
+#endif
}
}
@@ -2574,11 +2700,17 @@
postreset(slave, classes);
}
- /* clear cached SError */
+ /*
+ * Some controllers can't be frozen very well and may set
+ * spuruious error conditions during reset. Clear accumulated
+ * error information. As reset is the final recovery action,
+ * nothing is lost by doing this.
+ */
spin_lock_irqsave(link->ap->lock, flags);
- link->eh_info.serror = 0;
+ memset(&link->eh_info, 0, sizeof(link->eh_info));
if (slave)
- slave->eh_info.serror = 0;
+ memset(&slave->eh_info, 0, sizeof(link->eh_info));
+ ap->pflags &= ~ATA_PFLAG_EH_PENDING;
spin_unlock_irqrestore(link->ap->lock, flags);
/* Make sure onlineness and classification result correspond.
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 619f2c3..51f0ffb 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -221,6 +221,8 @@
{
u32 rev = gscr[SATA_PMP_GSCR_REV];
+ if (rev & (1 << 3))
+ return "1.2";
if (rev & (1 << 2))
return "1.1";
if (rev & (1 << 1))
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d0dfeef..b4ee28d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1119,10 +1119,6 @@
blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
} else {
- if (ata_id_is_ssd(dev->id))
- queue_flag_set_unlocked(QUEUE_FLAG_NONROT,
- sdev->request_queue);
-
/* ATA devices must be sector aligned */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_SECT_SIZE - 1);
@@ -1257,23 +1253,6 @@
return queue_depth;
}
-/* XXX: for spindown warning */
-static void ata_delayed_done_timerfn(unsigned long arg)
-{
- struct scsi_cmnd *scmd = (void *)arg;
-
- scmd->scsi_done(scmd);
-}
-
-/* XXX: for spindown warning */
-static void ata_delayed_done(struct scsi_cmnd *scmd)
-{
- static struct timer_list timer;
-
- setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd);
- mod_timer(&timer, jiffies + 5 * HZ);
-}
-
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
@@ -1338,32 +1317,6 @@
system_entering_hibernation())
goto skip;
- /* XXX: This is for backward compatibility, will be
- * removed. Read Documentation/feature-removal-schedule.txt
- * for more info.
- */
- if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
- (system_state == SYSTEM_HALT ||
- system_state == SYSTEM_POWER_OFF)) {
- static unsigned long warned;
-
- if (!test_and_set_bit(0, &warned)) {
- ata_dev_printk(qc->dev, KERN_WARNING,
- "DISK MIGHT NOT BE SPUN DOWN PROPERLY. "
- "UPDATE SHUTDOWN UTILITY\n");
- ata_dev_printk(qc->dev, KERN_WARNING,
- "For more info, visit "
- "http://linux-ata.org/shutdown.html\n");
-
- /* ->scsi_done is not used, use it for
- * delayed completion.
- */
- scmd->scsi_done = qc->scsidone;
- qc->scsidone = ata_delayed_done;
- }
- goto skip;
- }
-
/* Issue ATA STANDBY IMMEDIATE command */
tf->command = ATA_CMD_STANDBYNOW1;
}
@@ -1764,14 +1717,6 @@
}
}
- /* XXX: track spindown state for spindown skipping and warning */
- if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
- qc->tf.command == ATA_CMD_STANDBYNOW1))
- qc->dev->flags |= ATA_DFLAG_SPUNDOWN;
- else if (likely(system_state != SYSTEM_HALT &&
- system_state != SYSTEM_POWER_OFF))
- qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN;
-
if (need_sense && !ap->ops->error_handler)
ata_dump_status(ap->print_id, &qc->result_tf);
@@ -2815,28 +2760,6 @@
goto invalid_fld;
/*
- * Filter TPM commands by default. These provide an
- * essentially uncontrolled encrypted "back door" between
- * applications and the disk. Set libata.allow_tpm=1 if you
- * have a real reason for wanting to use them. This ensures
- * that installed software cannot easily mess stuff up without
- * user intent. DVR type users will probably ship with this enabled
- * for movie content management.
- *
- * Note that for ATA8 we can issue a DCS change and DCS freeze lock
- * for this and should do in future but that it is not sufficient as
- * DCS is an optional feature set. Thus we also do the software filter
- * so that we comply with the TC consortium stated goal that the user
- * can turn off TC features of their system.
- */
- if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
- goto invalid_fld;
-
- /* We may not issue DMA commands if no DMA mode is set */
- if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
- goto invalid_fld;
-
- /*
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
*/
@@ -2885,6 +2808,41 @@
tf->device = dev->devno ?
tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+ /* READ/WRITE LONG use a non-standard sect_size */
+ qc->sect_size = ATA_SECT_SIZE;
+ switch (tf->command) {
+ case ATA_CMD_READ_LONG:
+ case ATA_CMD_READ_LONG_ONCE:
+ case ATA_CMD_WRITE_LONG:
+ case ATA_CMD_WRITE_LONG_ONCE:
+ if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
+ goto invalid_fld;
+ qc->sect_size = scsi_bufflen(scmd);
+ }
+
+ /*
+ * Set flags so that all registers will be written, pass on
+ * write indication (used for PIO/DMA setup), result TF is
+ * copied back and we don't whine too much about its failure.
+ */
+ tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ ata_qc_set_pc_nbytes(qc);
+
+ /* We may not issue DMA commands if no DMA mode is set */
+ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
+ goto invalid_fld;
+
/* sanity check for pio multi commands */
if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf))
goto invalid_fld;
@@ -2901,18 +2859,6 @@
multi_count);
}
- /* READ/WRITE LONG use a non-standard sect_size */
- qc->sect_size = ATA_SECT_SIZE;
- switch (tf->command) {
- case ATA_CMD_READ_LONG:
- case ATA_CMD_READ_LONG_ONCE:
- case ATA_CMD_WRITE_LONG:
- case ATA_CMD_WRITE_LONG_ONCE:
- if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
- goto invalid_fld;
- qc->sect_size = scsi_bufflen(scmd);
- }
-
/*
* Filter SET_FEATURES - XFER MODE command -- otherwise,
* SET_FEATURES - XFER MODE must be preceded/succeeded
@@ -2920,30 +2866,27 @@
* controller (i.e. the reason for ->set_piomode(),
* ->set_dmamode(), and ->post_set_mode() hooks).
*/
- if ((tf->command == ATA_CMD_SET_FEATURES)
- && (tf->feature == SETFEATURES_XFER))
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_XFER)
goto invalid_fld;
/*
- * Set flags so that all registers will be written,
- * and pass on write indication (used for PIO/DMA
- * setup.)
- */
- tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
-
- if (scmd->sc_data_direction == DMA_TO_DEVICE)
- tf->flags |= ATA_TFLAG_WRITE;
-
- /*
- * Set transfer length.
+ * Filter TPM commands by default. These provide an
+ * essentially uncontrolled encrypted "back door" between
+ * applications and the disk. Set libata.allow_tpm=1 if you
+ * have a real reason for wanting to use them. This ensures
+ * that installed software cannot easily mess stuff up without
+ * user intent. DVR type users will probably ship with this enabled
+ * for movie content management.
*
- * TODO: find out if we need to do more here to
- * cover scatter/gather case.
+ * Note that for ATA8 we can issue a DCS change and DCS freeze lock
+ * for this and should do in future but that it is not sufficient as
+ * DCS is an optional feature set. Thus we also do the software filter
+ * so that we comply with the TC consortium stated goal that the user
+ * can turn off TC features of their system.
*/
- ata_qc_set_pc_nbytes(qc);
-
- /* request result TF and be quiet about device error */
- qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
+ if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
+ goto invalid_fld;
return 0;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 89a1e00..be8e262 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -164,6 +164,7 @@
extern void ata_eh_done(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_autopsy(struct ata_port *ap);
+const char *ata_get_cmd_descript(u8 command);
extern void ata_eh_report(struct ata_port *ap);
extern int ata_eh_reset(struct ata_link *link, int classify,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 4591556..aa4b3f6 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -246,6 +246,7 @@
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), },
{ },
};
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index d33aa28..403f561 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -202,7 +202,8 @@
}
static const struct pci_device_id cs5535[] = {
- { PCI_VDEVICE(NS, 0x002D), },
+ { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
{ },
};
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index abdd19f..d6f6956 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -213,7 +213,7 @@
* This is tI, C.F. spec. says 0, but Sony CF card requires
* more, we use 20 nS.
*/
- dma_tim.s.dmack_s = ns_to_tim_reg(tim_mult, 20);;
+ dma_tim.s.dmack_s = ns_to_tim_reg(tim_mult, 20);
dma_tim.s.dmack_h = ns_to_tim_reg(tim_mult, dma_ackh);
dma_tim.s.dmarq = dma_arq;
@@ -841,7 +841,7 @@
ocd = pdev->dev.platform_data;
cs0 = devm_ioremap_nocache(&pdev->dev, res_cs0->start,
- res_cs0->end - res_cs0->start + 1);
+ resource_size(res_cs0));
if (!cs0)
return -ENOMEM;
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index d8d743a..3f6ebc6 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -151,14 +151,14 @@
*/
if (mmio) {
ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
- io_res->end - io_res->start + 1);
+ resource_size(io_res));
ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
- ctl_res->end - ctl_res->start + 1);
+ resource_size(ctl_res));
} else {
ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
- io_res->end - io_res->start + 1);
+ resource_size(io_res));
ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
- ctl_res->end - ctl_res->start + 1);
+ resource_size(ctl_res));
}
if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
dev_err(dev, "failed to map IO/CTL base\n");
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index 8e3cdef..45f1e10 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -151,7 +151,7 @@
info->irq = irq;
info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
- res->end - res->start + 1);
+ resource_size(res));
if (!info->iobase)
return -ENOMEM;
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
new file mode 100644
index 0000000..c843a1e
--- /dev/null
+++ b/drivers/ata/pata_rdc.c
@@ -0,0 +1,400 @@
+/*
+ * pata_rdc - Driver for later RDC PATA controllers
+ *
+ * This is actually a driver for hardware meeting
+ * INCITS 370-2004 (1510D): ATA Host Adapter Standards
+ *
+ * Based on ata_piix.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_rdc"
+#define DRV_VERSION "0.01"
+
+struct rdc_host_priv {
+ u32 saved_iocfg;
+};
+
+/**
+ * rdc_pata_cable_detect - Probe host controller cable detect info
+ * @ap: Port for which cable detect info is desired
+ *
+ * Read 80c cable indicator from ATA PCI device's PCI config
+ * register. This register is normally set by firmware (BIOS).
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static int rdc_pata_cable_detect(struct ata_port *ap)
+{
+ struct rdc_host_priv *hpriv = ap->host->private_data;
+ u8 mask;
+
+ /* check BIOS cable detect results */
+ mask = 0x30 << (2 * ap->port_no);
+ if ((hpriv->saved_iocfg & mask) == 0)
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * rdc_pata_prereset - prereset for PATA host controller
+ * @link: Target link
+ * @deadline: deadline jiffies for the operation
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ static const struct pci_bits rdc_enable_bits[] = {
+ { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
+ { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
+ };
+
+ if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
+ return -ENOENT;
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
+ * rdc_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int is_slave = (adev->devno != 0);
+ unsigned int master_port= ap->port_no ? 0x42 : 0x40;
+ unsigned int slave_port = 0x44;
+ u16 master_data;
+ u8 slave_data;
+ u8 udma_enable;
+ int control = 0;
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ if (pio >= 2)
+ control |= 1; /* TIME1 enable */
+ if (ata_pio_need_iordy(adev))
+ control |= 2; /* IE enable */
+
+ if (adev->class == ATA_DEV_ATA)
+ control |= 4; /* PPE enable */
+
+ /* PIO configuration clears DTE unconditionally. It will be
+ * programmed in set_dmamode which is guaranteed to be called
+ * after set_piomode if any DMA mode is available.
+ */
+ pci_read_config_word(dev, master_port, &master_data);
+ if (is_slave) {
+ /* clear TIME1|IE1|PPE1|DTE1 */
+ master_data &= 0xff0f;
+ /* Enable SITRE (separate slave timing register) */
+ master_data |= 0x4000;
+ /* enable PPE1, IE1 and TIME1 as needed */
+ master_data |= (control << 4);
+ pci_read_config_byte(dev, slave_port, &slave_data);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
+ /* Load the timing nibble for this slave */
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
+ << (ap->port_no ? 4 : 0);
+ } else {
+ /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
+ master_data &= 0xccf0;
+ /* Enable PPE, IE and TIME as appropriate */
+ master_data |= control;
+ /* load ISP and RCT */
+ master_data |=
+ (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ }
+ pci_write_config_word(dev, master_port, master_data);
+ if (is_slave)
+ pci_write_config_byte(dev, slave_port, slave_data);
+
+ /* Ensure the UDMA bit is off - it will be turned back on if
+ UDMA is selected */
+
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+ udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
+ pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+/**
+ * rdc_set_dmamode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Drive in question
+ *
+ * Set UDMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ u8 master_port = ap->port_no ? 0x42 : 0x40;
+ u16 master_data;
+ u8 speed = adev->dma_mode;
+ int devid = adev->devno + 2 * ap->port_no;
+ u8 udma_enable = 0;
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ pci_read_config_word(dev, master_port, &master_data);
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+
+ if (speed >= XFER_UDMA_0) {
+ unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+ u16 udma_timing;
+ u16 ideconf;
+ int u_clock, u_speed;
+
+ /*
+ * UDMA is handled by a combination of clock switching and
+ * selection of dividers
+ *
+ * Handy rule: Odd modes are UDMATIMx 01, even are 02
+ * except UDMA0 which is 00
+ */
+ u_speed = min(2 - (udma & 1), udma);
+ if (udma == 5)
+ u_clock = 0x1000; /* 100Mhz */
+ else if (udma > 2)
+ u_clock = 1; /* 66Mhz */
+ else
+ u_clock = 0; /* 33Mhz */
+
+ udma_enable |= (1 << devid);
+
+ /* Load the CT/RP selection */
+ pci_read_config_word(dev, 0x4A, &udma_timing);
+ udma_timing &= ~(3 << (4 * devid));
+ udma_timing |= u_speed << (4 * devid);
+ pci_write_config_word(dev, 0x4A, udma_timing);
+
+ /* Select a 33/66/100Mhz clock */
+ pci_read_config_word(dev, 0x54, &ideconf);
+ ideconf &= ~(0x1001 << devid);
+ ideconf |= u_clock << devid;
+ pci_write_config_word(dev, 0x54, ideconf);
+ } else {
+ /*
+ * MWDMA is driven by the PIO timings. We must also enable
+ * IORDY unconditionally along with TIME1. PPE has already
+ * been set when the PIO timing was set.
+ */
+ unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
+ unsigned int control;
+ u8 slave_data;
+ const unsigned int needed_pio[3] = {
+ XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
+ };
+ int pio = needed_pio[mwdma] - XFER_PIO_0;
+
+ control = 3; /* IORDY|TIME1 */
+
+ /* If the drive MWDMA is faster than it can do PIO then
+ we must force PIO into PIO0 */
+
+ if (adev->pio_mode < needed_pio[mwdma])
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
+
+ if (adev->devno) { /* Slave */
+ master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
+ master_data |= control << 4;
+ pci_read_config_byte(dev, 0x44, &slave_data);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
+ /* Load the matching timing */
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+ pci_write_config_byte(dev, 0x44, slave_data);
+ } else { /* Master */
+ master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
+ and master timing bits */
+ master_data |= control;
+ master_data |=
+ (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ }
+
+ udma_enable &= ~(1 << devid);
+ pci_write_config_word(dev, master_port, master_data);
+ }
+ pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+static struct ata_port_operations rdc_pata_ops = {
+ .inherits = &ata_bmdma32_port_ops,
+ .cable_detect = rdc_pata_cable_detect,
+ .set_piomode = rdc_set_piomode,
+ .set_dmamode = rdc_set_dmamode,
+ .prereset = rdc_pata_prereset,
+};
+
+static struct ata_port_info rdc_port_info = {
+
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &rdc_pata_ops,
+};
+
+static struct scsi_host_template rdc_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+/**
+ * rdc_init_one - Register PIIX ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in rdc_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer. We probe for combined mode (sigh),
+ * and then hand over control to libata, for it to do the rest.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int __devinit rdc_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct device *dev = &pdev->dev;
+ struct ata_port_info port_info[2];
+ const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
+ unsigned long port_flags;
+ struct ata_host *host;
+ struct rdc_host_priv *hpriv;
+ int rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ port_info[0] = rdc_port_info;
+ port_info[1] = rdc_port_info;
+
+ port_flags = port_info[0].flags;
+
+ /* enable device and prepare host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+
+ /* Save IOCFG, this will be used for cable detection, quirk
+ * detection and restoration on detach.
+ */
+ pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ host->private_data = hpriv;
+
+ pci_intx(pdev, 1);
+
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+
+ pci_set_master(pdev);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht);
+}
+
+static void rdc_remove_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct rdc_host_priv *hpriv = host->private_data;
+
+ pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
+
+ ata_pci_remove_one(pdev);
+}
+
+static const struct pci_device_id rdc_pci_tbl[] = {
+ { PCI_DEVICE(0x17F3, 0x1011), },
+ { PCI_DEVICE(0x17F3, 0x1012), },
+ { } /* terminate list */
+};
+
+static struct pci_driver rdc_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rdc_pci_tbl,
+ .probe = rdc_init_one,
+ .remove = rdc_remove_one,
+};
+
+
+static int __init rdc_init(void)
+{
+ return pci_register_driver(&rdc_pci_driver);
+}
+
+static void __exit rdc_exit(void)
+{
+ pci_unregister_driver(&rdc_pci_driver);
+}
+
+module_init(rdc_init);
+module_exit(rdc_exit);
+
+MODULE_AUTHOR("Alan Cox (based on ata_piix)");
+MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 0c574c0..a5e4dfe 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -85,7 +85,6 @@
static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int printed_version;
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -93,8 +92,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
if (rz1000_fifo_disable(pdev) == 0)
return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 94eaa43..d344db4 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1257,6 +1257,7 @@
static struct ata_port_operations sata_fsl_ops = {
.inherits = &sata_pmp_port_ops,
+ .qc_defer = ata_std_qc_defer,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.qc_fill_rtf = sata_fsl_qc_fill_rtf,
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 8d890cc..4406902 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -405,7 +405,7 @@
struct ata_host *host = dev_instance;
struct inic_host_priv *hpriv = host->private_data;
u16 host_irq_stat;
- int i, handled = 0;;
+ int i, handled = 0;
host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index c19417e..17f9ff9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4013,7 +4013,7 @@
host->iomap = NULL;
hpriv->base = devm_ioremap(&pdev->dev, res->start,
- res->end - res->start + 1);
+ resource_size(res));
hpriv->base -= SATAHC0_REG_BASE;
/*
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 35bd5cc..3cb69d5 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -565,6 +565,19 @@
tmp |= SIL_MASK_IDE0_INT << ap->port_no;
writel(tmp, mmio_base + SIL_SYSCFG);
readl(mmio_base + SIL_SYSCFG); /* flush */
+
+ /* Ensure DMA_ENABLE is off.
+ *
+ * This is because the controller will not give us access to the
+ * taskfile registers while a DMA is in progress
+ */
+ iowrite8(ioread8(ap->ioaddr.bmdma_addr) & ~SIL_DMA_ENABLE,
+ ap->ioaddr.bmdma_addr);
+
+ /* According to ata_bmdma_stop, an HDMA transition requires
+ * on PIO cycle. But we can't read a taskfile register.
+ */
+ ioread8(ap->ioaddr.bmdma_addr);
}
static void sil_thaw(struct ata_port *ap)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 77aa8d7..e6946fc 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -846,6 +846,17 @@
if (!ata_is_atapi(qc->tf.protocol)) {
prb = &cb->ata.prb;
sge = cb->ata.sge;
+ if (ata_is_data(qc->tf.protocol)) {
+ u16 prot = 0;
+ ctrl = PRB_CTRL_PROTOCOL;
+ if (ata_is_ncq(qc->tf.protocol))
+ prot |= PRB_PROT_NCQ;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ prot |= PRB_PROT_WRITE;
+ else
+ prot |= PRB_PROT_READ;
+ prb->prot = cpu_to_le16(prot);
+ }
} else {
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 8f98332..f8a91bf 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -109,8 +109,9 @@
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
+static unsigned int get_scr_cfg_addr(struct ata_link *link, unsigned int sc_reg)
{
+ struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
u8 pmr;
@@ -131,6 +132,9 @@
break;
}
}
+ if (link->pmp)
+ addr += 0x10;
+
return addr;
}
@@ -138,24 +142,12 @@
unsigned int sc_reg, u32 *val)
{
struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg);
- u32 val2 = 0;
- u8 pmr;
+ unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg);
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
return -EINVAL;
- pci_read_config_byte(pdev, SIS_PMR, &pmr);
-
pci_read_config_dword(pdev, cfg_addr, val);
-
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
- (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
- pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
-
- *val |= val2;
- *val &= 0xfffffffb; /* avoid problems with powerdowned ports */
-
return 0;
}
@@ -163,28 +155,16 @@
unsigned int sc_reg, u32 val)
{
struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg);
- u8 pmr;
-
- if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
- return -EINVAL;
-
- pci_read_config_byte(pdev, SIS_PMR, &pmr);
+ unsigned int cfg_addr = get_scr_cfg_addr(link, sc_reg);
pci_write_config_dword(pdev, cfg_addr, val);
-
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
- (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
- pci_write_config_dword(pdev, cfg_addr+0x10, val);
-
return 0;
}
static int sis_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
{
struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 pmr;
+ void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10;
if (sc_reg > SCR_CONTROL)
return -EINVAL;
@@ -192,39 +172,23 @@
if (ap->flags & SIS_FLAG_CFGSCR)
return sis_scr_cfg_read(link, sc_reg, val);
- pci_read_config_byte(pdev, SIS_PMR, &pmr);
-
- *val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
-
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
- (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
- *val |= ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
-
- *val &= 0xfffffffb;
-
+ *val = ioread32(base + sc_reg * 4);
return 0;
}
static int sis_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
{
struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 pmr;
+ void __iomem *base = ap->ioaddr.scr_addr + link->pmp * 0x10;
if (sc_reg > SCR_CONTROL)
return -EINVAL;
- pci_read_config_byte(pdev, SIS_PMR, &pmr);
-
if (ap->flags & SIS_FLAG_CFGSCR)
return sis_scr_cfg_write(link, sc_reg, val);
- else {
- iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
- (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
- iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
- return 0;
- }
+
+ iowrite32(val, base + (sc_reg * 4));
+ return 0;
}
static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -236,7 +200,7 @@
u32 genctl, val;
u8 pmr;
u8 port2_start = 0x20;
- int rc;
+ int i, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -319,6 +283,17 @@
if (rc)
return rc;
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ap->flags & ATA_FLAG_SATA &&
+ ap->flags & ATA_FLAG_SLAVE_POSS) {
+ rc = ata_slave_link_init(ap);
+ if (rc)
+ return rc;
+ }
+ }
+
if (!(pi.flags & SIS_FLAG_CFGSCR)) {
void __iomem *mmio;
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 6b969f8..01ce241 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -641,7 +641,7 @@
pre = 1;
break;
case round_nearest:
- pre = (br+(c<<div)/2)/(c<<div);
+ pre = DIV_ROUND_CLOSEST(br, c<<div);
// but p must be non-zero
if (!pre)
pre = 1;
@@ -671,7 +671,7 @@
pre = DIV_ROUND_UP(br, c<<div);
break;
case round_nearest:
- pre = (br+(c<<div)/2)/(c<<div);
+ pre = DIV_ROUND_CLOSEST(br, c<<div);
break;
default: /* round_up */
pre = br/(c<<div);
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 9359613a..307321b 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -372,7 +372,7 @@
}
snr = next_string(skb);
- if (!str)
+ if (!snr)
return -EIO;
attn = next_string(skb);
if (!attn)
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 5e41e6d..db195ab 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -155,7 +155,7 @@
u16 fw_ver; /* version of blade's firmware */
struct work_struct work;/* disk create work struct */
struct gendisk *gd;
- struct request_queue blkq;
+ struct request_queue *blkq;
struct hd_geometry geo;
sector_t ssize;
struct timer_list timer;
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 2307a27..95d3449 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -264,9 +264,13 @@
goto err_disk;
}
- blk_queue_make_request(&d->blkq, aoeblk_make_request);
- if (bdi_init(&d->blkq.backing_dev_info))
+ d->blkq = blk_alloc_queue(GFP_KERNEL);
+ if (!d->blkq)
goto err_mempool;
+ blk_queue_make_request(d->blkq, aoeblk_make_request);
+ d->blkq->backing_dev_info.name = "aoe";
+ if (bdi_init(&d->blkq->backing_dev_info))
+ goto err_blkq;
spin_lock_irqsave(&d->lock, flags);
gd->major = AOE_MAJOR;
gd->first_minor = d->sysminor * AOE_PARTITIONS;
@@ -276,7 +280,7 @@
snprintf(gd->disk_name, sizeof gd->disk_name, "etherd/e%ld.%d",
d->aoemajor, d->aoeminor);
- gd->queue = &d->blkq;
+ gd->queue = d->blkq;
d->gd = gd;
d->flags &= ~DEVFL_GDALLOC;
d->flags |= DEVFL_UP;
@@ -287,6 +291,9 @@
aoedisk_add_sysfs(d);
return;
+err_blkq:
+ blk_cleanup_queue(d->blkq);
+ d->blkq = NULL;
err_mempool:
mempool_destroy(d->bufpool);
err_disk:
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index eeea477..fa67027 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -113,6 +113,7 @@
if (d->bufpool)
mempool_destroy(d->bufpool);
skbpoolfree(d);
+ blk_cleanup_queue(d->blkq);
kfree(d);
}
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 1164837..652367a 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -170,5 +170,30 @@
Say Y here to compile support for virtual HCI devices into the
kernel or say M to compile it as module (hci_vhci).
+config BT_MRVL
+ tristate "Marvell Bluetooth driver support"
+ help
+ The core driver to support Marvell Bluetooth devices.
+
+ This driver is required if you want to support
+ Marvell Bluetooth devices, such as 8688.
+
+ Say Y here to compile Marvell Bluetooth driver
+ into the kernel or say M to compile it as module.
+
+config BT_MRVL_SDIO
+ tristate "Marvell BT-over-SDIO driver"
+ depends on BT_MRVL && MMC
+ select FW_LOADER
+ help
+ The driver for Marvell Bluetooth chipsets with SDIO interface.
+
+ This driver is required if you want to use Marvell Bluetooth
+ devices with SDIO interface. Currently only SD8688 chipset is
+ supported.
+
+ Say Y here to compile support for Marvell BT-over-SDIO driver
+ into the kernel or say M to compile it as module.
+
endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 16930f9..b3f57d2 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -15,6 +15,12 @@
obj-$(CONFIG_BT_HCIBTUSB) += btusb.o
obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o
+obj-$(CONFIG_BT_MRVL) += btmrvl.o
+obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
+
+btmrvl-y := btmrvl_main.o
+btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
+
hci_uart-y := hci_ldisc.o
hci_uart-$(CONFIG_BT_HCIUART_H4) += hci_h4.o
hci_uart-$(CONFIG_BT_HCIUART_BCSP) += hci_bcsp.o
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
new file mode 100644
index 0000000..4617bd1
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -0,0 +1,432 @@
+/**
+ * Marvell Bluetooth driver: debugfs related functions
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/debugfs.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+
+struct btmrvl_debugfs_data {
+ struct dentry *root_dir, *config_dir, *status_dir;
+
+ /* config */
+ struct dentry *drvdbg;
+ struct dentry *psmode;
+ struct dentry *pscmd;
+ struct dentry *hsmode;
+ struct dentry *hscmd;
+ struct dentry *gpiogap;
+ struct dentry *hscfgcmd;
+
+ /* status */
+ struct dentry *curpsmode;
+ struct dentry *hsstate;
+ struct dentry *psstate;
+ struct dentry *txdnldready;
+};
+
+static int btmrvl_open_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t btmrvl_hscfgcmd_write(struct file *file,
+ const char __user *ubuf, size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ long result, ret;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ ret = strict_strtol(buf, 10, &result);
+
+ priv->btmrvl_dev.hscfgcmd = result;
+
+ if (priv->btmrvl_dev.hscfgcmd) {
+ btmrvl_prepare_command(priv);
+ wake_up_interruptible(&priv->main_thread.wait_q);
+ }
+
+ return count;
+}
+
+static ssize_t btmrvl_hscfgcmd_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+ priv->btmrvl_dev.hscfgcmd);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hscfgcmd_fops = {
+ .read = btmrvl_hscfgcmd_read,
+ .write = btmrvl_hscfgcmd_write,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ long result, ret;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ ret = strict_strtol(buf, 10, &result);
+
+ priv->btmrvl_dev.psmode = result;
+
+ return count;
+}
+
+static ssize_t btmrvl_psmode_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+ priv->btmrvl_dev.psmode);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_psmode_fops = {
+ .read = btmrvl_psmode_read,
+ .write = btmrvl_psmode_write,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ long result, ret;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ ret = strict_strtol(buf, 10, &result);
+
+ priv->btmrvl_dev.pscmd = result;
+
+ if (priv->btmrvl_dev.pscmd) {
+ btmrvl_prepare_command(priv);
+ wake_up_interruptible(&priv->main_thread.wait_q);
+ }
+
+ return count;
+
+}
+
+static ssize_t btmrvl_pscmd_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.pscmd);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_pscmd_fops = {
+ .read = btmrvl_pscmd_read,
+ .write = btmrvl_pscmd_write,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ long result, ret;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ ret = strict_strtol(buf, 16, &result);
+
+ priv->btmrvl_dev.gpio_gap = result;
+
+ return count;
+}
+
+static ssize_t btmrvl_gpiogap_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "0x%x\n",
+ priv->btmrvl_dev.gpio_gap);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_gpiogap_fops = {
+ .read = btmrvl_gpiogap_read,
+ .write = btmrvl_gpiogap_write,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = (struct btmrvl_private *) file->private_data;
+ char buf[16];
+ long result, ret;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ ret = strict_strtol(buf, 10, &result);
+
+ priv->btmrvl_dev.hscmd = result;
+ if (priv->btmrvl_dev.hscmd) {
+ btmrvl_prepare_command(priv);
+ wake_up_interruptible(&priv->main_thread.wait_q);
+ }
+
+ return count;
+}
+
+static ssize_t btmrvl_hscmd_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.hscmd);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hscmd_fops = {
+ .read = btmrvl_hscmd_read,
+ .write = btmrvl_hscmd_write,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ long result, ret;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ ret = strict_strtol(buf, 10, &result);
+
+ priv->btmrvl_dev.hsmode = result;
+
+ return count;
+}
+
+static ssize_t btmrvl_hsmode_read(struct file *file, char __user * userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.hsmode);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hsmode_fops = {
+ .read = btmrvl_hsmode_read,
+ .write = btmrvl_hsmode_write,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_curpsmode_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->psmode);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_curpsmode_fops = {
+ .read = btmrvl_curpsmode_read,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_psstate_read(struct file *file, char __user * userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->ps_state);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_psstate_fops = {
+ .read = btmrvl_psstate_read,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_hsstate_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->hs_state);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hsstate_fops = {
+ .read = btmrvl_hsstate_read,
+ .open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_txdnldready_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct btmrvl_private *priv = file->private_data;
+ char buf[16];
+ int ret;
+
+ ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+ priv->btmrvl_dev.tx_dnld_rdy);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_txdnldready_fops = {
+ .read = btmrvl_txdnldready_read,
+ .open = btmrvl_open_generic,
+};
+
+void btmrvl_debugfs_init(struct hci_dev *hdev)
+{
+ struct btmrvl_private *priv = hdev->driver_data;
+ struct btmrvl_debugfs_data *dbg;
+
+ dbg = kzalloc(sizeof(*dbg), GFP_KERNEL);
+ priv->debugfs_data = dbg;
+
+ if (!dbg) {
+ BT_ERR("Can not allocate memory for btmrvl_debugfs_data.");
+ return;
+ }
+
+ dbg->root_dir = debugfs_create_dir("btmrvl", NULL);
+
+ dbg->config_dir = debugfs_create_dir("config", dbg->root_dir);
+
+ dbg->psmode = debugfs_create_file("psmode", 0644, dbg->config_dir,
+ hdev->driver_data, &btmrvl_psmode_fops);
+ dbg->pscmd = debugfs_create_file("pscmd", 0644, dbg->config_dir,
+ hdev->driver_data, &btmrvl_pscmd_fops);
+ dbg->gpiogap = debugfs_create_file("gpiogap", 0644, dbg->config_dir,
+ hdev->driver_data, &btmrvl_gpiogap_fops);
+ dbg->hsmode = debugfs_create_file("hsmode", 0644, dbg->config_dir,
+ hdev->driver_data, &btmrvl_hsmode_fops);
+ dbg->hscmd = debugfs_create_file("hscmd", 0644, dbg->config_dir,
+ hdev->driver_data, &btmrvl_hscmd_fops);
+ dbg->hscfgcmd = debugfs_create_file("hscfgcmd", 0644, dbg->config_dir,
+ hdev->driver_data, &btmrvl_hscfgcmd_fops);
+
+ dbg->status_dir = debugfs_create_dir("status", dbg->root_dir);
+ dbg->curpsmode = debugfs_create_file("curpsmode", 0444,
+ dbg->status_dir,
+ hdev->driver_data,
+ &btmrvl_curpsmode_fops);
+ dbg->psstate = debugfs_create_file("psstate", 0444, dbg->status_dir,
+ hdev->driver_data, &btmrvl_psstate_fops);
+ dbg->hsstate = debugfs_create_file("hsstate", 0444, dbg->status_dir,
+ hdev->driver_data, &btmrvl_hsstate_fops);
+ dbg->txdnldready = debugfs_create_file("txdnldready", 0444,
+ dbg->status_dir,
+ hdev->driver_data,
+ &btmrvl_txdnldready_fops);
+}
+
+void btmrvl_debugfs_remove(struct hci_dev *hdev)
+{
+ struct btmrvl_private *priv = hdev->driver_data;
+ struct btmrvl_debugfs_data *dbg = priv->debugfs_data;
+
+ if (!dbg)
+ return;
+
+ debugfs_remove(dbg->psmode);
+ debugfs_remove(dbg->pscmd);
+ debugfs_remove(dbg->gpiogap);
+ debugfs_remove(dbg->hsmode);
+ debugfs_remove(dbg->hscmd);
+ debugfs_remove(dbg->hscfgcmd);
+ debugfs_remove(dbg->config_dir);
+
+ debugfs_remove(dbg->curpsmode);
+ debugfs_remove(dbg->psstate);
+ debugfs_remove(dbg->hsstate);
+ debugfs_remove(dbg->txdnldready);
+ debugfs_remove(dbg->status_dir);
+
+ debugfs_remove(dbg->root_dir);
+
+ kfree(dbg);
+}
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
new file mode 100644
index 0000000..411c7a7
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -0,0 +1,139 @@
+/*
+ * Marvell Bluetooth driver: global definitions & declarations
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ *
+ */
+
+#include <linux/kthread.h>
+#include <linux/bitops.h>
+#include <net/bluetooth/bluetooth.h>
+
+#define BTM_HEADER_LEN 4
+#define BTM_UPLD_SIZE 2312
+
+/* Time to wait until Host Sleep state change in millisecond */
+#define WAIT_UNTIL_HS_STATE_CHANGED 5000
+/* Time to wait for command response in millisecond */
+#define WAIT_UNTIL_CMD_RESP 5000
+
+struct btmrvl_thread {
+ struct task_struct *task;
+ wait_queue_head_t wait_q;
+ void *priv;
+};
+
+struct btmrvl_device {
+ void *card;
+ struct hci_dev *hcidev;
+
+ u8 tx_dnld_rdy;
+
+ u8 psmode;
+ u8 pscmd;
+ u8 hsmode;
+ u8 hscmd;
+
+ /* Low byte is gap, high byte is GPIO */
+ u16 gpio_gap;
+
+ u8 hscfgcmd;
+ u8 sendcmdflag;
+};
+
+struct btmrvl_adapter {
+ u32 int_count;
+ struct sk_buff_head tx_queue;
+ u8 psmode;
+ u8 ps_state;
+ u8 hs_state;
+ u8 wakeup_tries;
+ wait_queue_head_t cmd_wait_q;
+ u8 cmd_complete;
+};
+
+struct btmrvl_private {
+ struct btmrvl_device btmrvl_dev;
+ struct btmrvl_adapter *adapter;
+ struct btmrvl_thread main_thread;
+ int (*hw_host_to_card) (struct btmrvl_private *priv,
+ u8 *payload, u16 nb);
+ int (*hw_wakeup_firmware) (struct btmrvl_private *priv);
+ spinlock_t driver_lock; /* spinlock used by driver */
+#ifdef CONFIG_DEBUG_FS
+ void *debugfs_data;
+#endif
+};
+
+#define MRVL_VENDOR_PKT 0xFE
+
+/* Bluetooth commands */
+#define BT_CMD_AUTO_SLEEP_MODE 0x23
+#define BT_CMD_HOST_SLEEP_CONFIG 0x59
+#define BT_CMD_HOST_SLEEP_ENABLE 0x5A
+#define BT_CMD_MODULE_CFG_REQ 0x5B
+
+/* Sub-commands: Module Bringup/Shutdown Request */
+#define MODULE_BRINGUP_REQ 0xF1
+#define MODULE_SHUTDOWN_REQ 0xF2
+
+#define BT_EVENT_POWER_STATE 0x20
+
+/* Bluetooth Power States */
+#define BT_PS_ENABLE 0x02
+#define BT_PS_DISABLE 0x03
+#define BT_PS_SLEEP 0x01
+
+#define OGF 0x3F
+
+/* Host Sleep states */
+#define HS_ACTIVATED 0x01
+#define HS_DEACTIVATED 0x00
+
+/* Power Save modes */
+#define PS_SLEEP 0x01
+#define PS_AWAKE 0x00
+
+struct btmrvl_cmd {
+ __le16 ocf_ogf;
+ u8 length;
+ u8 data[4];
+} __attribute__ ((packed));
+
+struct btmrvl_event {
+ u8 ec; /* event counter */
+ u8 length;
+ u8 data[4];
+} __attribute__ ((packed));
+
+/* Prototype of global function */
+
+struct btmrvl_private *btmrvl_add_card(void *card);
+int btmrvl_remove_card(struct btmrvl_private *priv);
+
+void btmrvl_interrupt(struct btmrvl_private *priv);
+
+void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
+
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
+int btmrvl_prepare_command(struct btmrvl_private *priv);
+
+#ifdef CONFIG_DEBUG_FS
+void btmrvl_debugfs_init(struct hci_dev *hdev);
+void btmrvl_debugfs_remove(struct hci_dev *hdev);
+#endif
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
new file mode 100644
index 0000000..e605563b
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -0,0 +1,624 @@
+/**
+ * Marvell Bluetooth driver
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+
+#define VERSION "1.0"
+
+/*
+ * This function is called by interface specific interrupt handler.
+ * It updates Power Save & Host Sleep states, and wakes up the main
+ * thread.
+ */
+void btmrvl_interrupt(struct btmrvl_private *priv)
+{
+ priv->adapter->ps_state = PS_AWAKE;
+
+ priv->adapter->wakeup_tries = 0;
+
+ priv->adapter->int_count++;
+
+ wake_up_interruptible(&priv->main_thread.wait_q);
+}
+EXPORT_SYMBOL_GPL(btmrvl_interrupt);
+
+void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+ struct hci_event_hdr *hdr = (void *) skb->data;
+ struct hci_ev_cmd_complete *ec;
+ u16 opcode, ocf;
+
+ if (hdr->evt == HCI_EV_CMD_COMPLETE) {
+ ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
+ opcode = __le16_to_cpu(ec->opcode);
+ ocf = hci_opcode_ocf(opcode);
+ if (ocf == BT_CMD_MODULE_CFG_REQ &&
+ priv->btmrvl_dev.sendcmdflag) {
+ priv->btmrvl_dev.sendcmdflag = false;
+ priv->adapter->cmd_complete = true;
+ wake_up_interruptible(&priv->adapter->cmd_wait_q);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
+
+int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+ struct btmrvl_adapter *adapter = priv->adapter;
+ struct btmrvl_event *event;
+ u8 ret = 0;
+
+ event = (struct btmrvl_event *) skb->data;
+ if (event->ec != 0xff) {
+ BT_DBG("Not Marvell Event=%x", event->ec);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ switch (event->data[0]) {
+ case BT_CMD_AUTO_SLEEP_MODE:
+ if (!event->data[2]) {
+ if (event->data[1] == BT_PS_ENABLE)
+ adapter->psmode = 1;
+ else
+ adapter->psmode = 0;
+ BT_DBG("PS Mode:%s",
+ (adapter->psmode) ? "Enable" : "Disable");
+ } else {
+ BT_DBG("PS Mode command failed");
+ }
+ break;
+
+ case BT_CMD_HOST_SLEEP_CONFIG:
+ if (!event->data[3])
+ BT_DBG("gpio=%x, gap=%x", event->data[1],
+ event->data[2]);
+ else
+ BT_DBG("HSCFG command failed");
+ break;
+
+ case BT_CMD_HOST_SLEEP_ENABLE:
+ if (!event->data[1]) {
+ adapter->hs_state = HS_ACTIVATED;
+ if (adapter->psmode)
+ adapter->ps_state = PS_SLEEP;
+ wake_up_interruptible(&adapter->cmd_wait_q);
+ BT_DBG("HS ACTIVATED!");
+ } else {
+ BT_DBG("HS Enable failed");
+ }
+ break;
+
+ case BT_CMD_MODULE_CFG_REQ:
+ if (priv->btmrvl_dev.sendcmdflag &&
+ event->data[1] == MODULE_BRINGUP_REQ) {
+ BT_DBG("EVENT:%s", (event->data[2]) ?
+ "Bring-up failed" : "Bring-up succeed");
+ } else if (priv->btmrvl_dev.sendcmdflag &&
+ event->data[1] == MODULE_SHUTDOWN_REQ) {
+ BT_DBG("EVENT:%s", (event->data[2]) ?
+ "Shutdown failed" : "Shutdown succeed");
+ } else {
+ BT_DBG("BT_CMD_MODULE_CFG_REQ resp for APP");
+ ret = -EINVAL;
+ }
+ break;
+
+ case BT_EVENT_POWER_STATE:
+ if (event->data[1] == BT_PS_SLEEP)
+ adapter->ps_state = PS_SLEEP;
+ BT_DBG("EVENT:%s",
+ (adapter->ps_state) ? "PS_SLEEP" : "PS_AWAKE");
+ break;
+
+ default:
+ BT_DBG("Unknown Event=%d", event->data[0]);
+ ret = -EINVAL;
+ break;
+ }
+
+exit:
+ if (!ret)
+ kfree_skb(skb);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_process_event);
+
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd)
+{
+ struct sk_buff *skb;
+ struct btmrvl_cmd *cmd;
+ int ret = 0;
+
+ skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ return -ENOMEM;
+ }
+
+ cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_MODULE_CFG_REQ));
+ cmd->length = 1;
+ cmd->data[0] = subcmd;
+
+ bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+ skb->dev = (void *) priv->btmrvl_dev.hcidev;
+ skb_queue_head(&priv->adapter->tx_queue, skb);
+
+ priv->btmrvl_dev.sendcmdflag = true;
+
+ priv->adapter->cmd_complete = false;
+
+ BT_DBG("Queue module cfg Command");
+
+ wake_up_interruptible(&priv->main_thread.wait_q);
+
+ if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
+ priv->adapter->cmd_complete,
+ msecs_to_jiffies(WAIT_UNTIL_CMD_RESP))) {
+ ret = -ETIMEDOUT;
+ BT_ERR("module_cfg_cmd(%x): timeout: %d",
+ subcmd, priv->btmrvl_dev.sendcmdflag);
+ }
+
+ BT_DBG("module cfg Command done");
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
+
+static int btmrvl_enable_hs(struct btmrvl_private *priv)
+{
+ struct sk_buff *skb;
+ struct btmrvl_cmd *cmd;
+ int ret = 0;
+
+ skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ return -ENOMEM;
+ }
+
+ cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_ENABLE));
+ cmd->length = 0;
+
+ bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+ skb->dev = (void *) priv->btmrvl_dev.hcidev;
+ skb_queue_head(&priv->adapter->tx_queue, skb);
+
+ BT_DBG("Queue hs enable Command");
+
+ wake_up_interruptible(&priv->main_thread.wait_q);
+
+ if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
+ priv->adapter->hs_state,
+ msecs_to_jiffies(WAIT_UNTIL_HS_STATE_CHANGED))) {
+ ret = -ETIMEDOUT;
+ BT_ERR("timeout: %d, %d,%d", priv->adapter->hs_state,
+ priv->adapter->ps_state,
+ priv->adapter->wakeup_tries);
+ }
+
+ return ret;
+}
+
+int btmrvl_prepare_command(struct btmrvl_private *priv)
+{
+ struct sk_buff *skb = NULL;
+ struct btmrvl_cmd *cmd;
+ int ret = 0;
+
+ if (priv->btmrvl_dev.hscfgcmd) {
+ priv->btmrvl_dev.hscfgcmd = 0;
+
+ skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ return -ENOMEM;
+ }
+
+ cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_CONFIG));
+ cmd->length = 2;
+ cmd->data[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+ cmd->data[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
+
+ bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+ skb->dev = (void *) priv->btmrvl_dev.hcidev;
+ skb_queue_head(&priv->adapter->tx_queue, skb);
+
+ BT_DBG("Queue HSCFG Command, gpio=0x%x, gap=0x%x",
+ cmd->data[0], cmd->data[1]);
+ }
+
+ if (priv->btmrvl_dev.pscmd) {
+ priv->btmrvl_dev.pscmd = 0;
+
+ skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ return -ENOMEM;
+ }
+
+ cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_AUTO_SLEEP_MODE));
+ cmd->length = 1;
+
+ if (priv->btmrvl_dev.psmode)
+ cmd->data[0] = BT_PS_ENABLE;
+ else
+ cmd->data[0] = BT_PS_DISABLE;
+
+ bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+ skb->dev = (void *) priv->btmrvl_dev.hcidev;
+ skb_queue_head(&priv->adapter->tx_queue, skb);
+
+ BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+ }
+
+ if (priv->btmrvl_dev.hscmd) {
+ priv->btmrvl_dev.hscmd = 0;
+
+ if (priv->btmrvl_dev.hsmode) {
+ ret = btmrvl_enable_hs(priv);
+ } else {
+ ret = priv->hw_wakeup_firmware(priv);
+ priv->adapter->hs_state = HS_DEACTIVATED;
+ }
+ }
+
+ return ret;
+}
+
+static int btmrvl_tx_pkt(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+ int ret = 0;
+
+ if (!skb || !skb->data)
+ return -EINVAL;
+
+ if (!skb->len || ((skb->len + BTM_HEADER_LEN) > BTM_UPLD_SIZE)) {
+ BT_ERR("Tx Error: Bad skb length %d : %d",
+ skb->len, BTM_UPLD_SIZE);
+ return -EINVAL;
+ }
+
+ if (skb_headroom(skb) < BTM_HEADER_LEN) {
+ struct sk_buff *tmp = skb;
+
+ skb = skb_realloc_headroom(skb, BTM_HEADER_LEN);
+ if (!skb) {
+ BT_ERR("Tx Error: realloc_headroom failed %d",
+ BTM_HEADER_LEN);
+ skb = tmp;
+ return -EINVAL;
+ }
+
+ kfree_skb(tmp);
+ }
+
+ skb_push(skb, BTM_HEADER_LEN);
+
+ /* header type: byte[3]
+ * HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor
+ * header length: byte[2][1][0]
+ */
+
+ skb->data[0] = (skb->len & 0x0000ff);
+ skb->data[1] = (skb->len & 0x00ff00) >> 8;
+ skb->data[2] = (skb->len & 0xff0000) >> 16;
+ skb->data[3] = bt_cb(skb)->pkt_type;
+
+ if (priv->hw_host_to_card)
+ ret = priv->hw_host_to_card(priv, skb->data, skb->len);
+
+ return ret;
+}
+
+static void btmrvl_init_adapter(struct btmrvl_private *priv)
+{
+ skb_queue_head_init(&priv->adapter->tx_queue);
+
+ priv->adapter->ps_state = PS_AWAKE;
+
+ init_waitqueue_head(&priv->adapter->cmd_wait_q);
+}
+
+static void btmrvl_free_adapter(struct btmrvl_private *priv)
+{
+ skb_queue_purge(&priv->adapter->tx_queue);
+
+ kfree(priv->adapter);
+
+ priv->adapter = NULL;
+}
+
+static int btmrvl_ioctl(struct hci_dev *hdev,
+ unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+static void btmrvl_destruct(struct hci_dev *hdev)
+{
+}
+
+static int btmrvl_send_frame(struct sk_buff *skb)
+{
+ struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+ struct btmrvl_private *priv = NULL;
+
+ BT_DBG("type=%d, len=%d", skb->pkt_type, skb->len);
+
+ if (!hdev || !hdev->driver_data) {
+ BT_ERR("Frame for unknown HCI device");
+ return -ENODEV;
+ }
+
+ priv = (struct btmrvl_private *) hdev->driver_data;
+ if (!test_bit(HCI_RUNNING, &hdev->flags)) {
+ BT_ERR("Failed testing HCI_RUNING, flags=%lx", hdev->flags);
+ print_hex_dump_bytes("data: ", DUMP_PREFIX_OFFSET,
+ skb->data, skb->len);
+ return -EBUSY;
+ }
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+ }
+
+ skb_queue_tail(&priv->adapter->tx_queue, skb);
+
+ wake_up_interruptible(&priv->main_thread.wait_q);
+
+ return 0;
+}
+
+static int btmrvl_flush(struct hci_dev *hdev)
+{
+ struct btmrvl_private *priv = hdev->driver_data;
+
+ skb_queue_purge(&priv->adapter->tx_queue);
+
+ return 0;
+}
+
+static int btmrvl_close(struct hci_dev *hdev)
+{
+ struct btmrvl_private *priv = hdev->driver_data;
+
+ if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
+ return 0;
+
+ skb_queue_purge(&priv->adapter->tx_queue);
+
+ return 0;
+}
+
+static int btmrvl_open(struct hci_dev *hdev)
+{
+ set_bit(HCI_RUNNING, &hdev->flags);
+
+ return 0;
+}
+
+/*
+ * This function handles the event generated by firmware, rx data
+ * received from firmware, and tx data sent from kernel.
+ */
+static int btmrvl_service_main_thread(void *data)
+{
+ struct btmrvl_thread *thread = data;
+ struct btmrvl_private *priv = thread->priv;
+ struct btmrvl_adapter *adapter = priv->adapter;
+ wait_queue_t wait;
+ struct sk_buff *skb;
+ ulong flags;
+
+ init_waitqueue_entry(&wait, current);
+
+ current->flags |= PF_NOFREEZE;
+
+ for (;;) {
+ add_wait_queue(&thread->wait_q, &wait);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (adapter->wakeup_tries ||
+ ((!adapter->int_count) &&
+ (!priv->btmrvl_dev.tx_dnld_rdy ||
+ skb_queue_empty(&adapter->tx_queue)))) {
+ BT_DBG("main_thread is sleeping...");
+ schedule();
+ }
+
+ set_current_state(TASK_RUNNING);
+
+ remove_wait_queue(&thread->wait_q, &wait);
+
+ BT_DBG("main_thread woke up");
+
+ if (kthread_should_stop()) {
+ BT_DBG("main_thread: break from main thread");
+ break;
+ }
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ if (adapter->int_count) {
+ adapter->int_count = 0;
+ } else if (adapter->ps_state == PS_SLEEP &&
+ !skb_queue_empty(&adapter->tx_queue)) {
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ adapter->wakeup_tries++;
+ priv->hw_wakeup_firmware(priv);
+ continue;
+ }
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ if (adapter->ps_state == PS_SLEEP)
+ continue;
+
+ if (!priv->btmrvl_dev.tx_dnld_rdy)
+ continue;
+
+ skb = skb_dequeue(&adapter->tx_queue);
+ if (skb) {
+ if (btmrvl_tx_pkt(priv, skb))
+ priv->btmrvl_dev.hcidev->stat.err_tx++;
+ else
+ priv->btmrvl_dev.hcidev->stat.byte_tx += skb->len;
+
+ kfree_skb(skb);
+ }
+ }
+
+ return 0;
+}
+
+struct btmrvl_private *btmrvl_add_card(void *card)
+{
+ struct hci_dev *hdev = NULL;
+ struct btmrvl_private *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ BT_ERR("Can not allocate priv");
+ goto err_priv;
+ }
+
+ priv->adapter = kzalloc(sizeof(*priv->adapter), GFP_KERNEL);
+ if (!priv->adapter) {
+ BT_ERR("Allocate buffer for btmrvl_adapter failed!");
+ goto err_adapter;
+ }
+
+ btmrvl_init_adapter(priv);
+
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ BT_ERR("Can not allocate HCI device");
+ goto err_hdev;
+ }
+
+ BT_DBG("Starting kthread...");
+ priv->main_thread.priv = priv;
+ spin_lock_init(&priv->driver_lock);
+
+ init_waitqueue_head(&priv->main_thread.wait_q);
+ priv->main_thread.task = kthread_run(btmrvl_service_main_thread,
+ &priv->main_thread, "btmrvl_main_service");
+
+ priv->btmrvl_dev.hcidev = hdev;
+ priv->btmrvl_dev.card = card;
+
+ hdev->driver_data = priv;
+
+ priv->btmrvl_dev.tx_dnld_rdy = true;
+
+ hdev->type = HCI_SDIO;
+ hdev->open = btmrvl_open;
+ hdev->close = btmrvl_close;
+ hdev->flush = btmrvl_flush;
+ hdev->send = btmrvl_send_frame;
+ hdev->destruct = btmrvl_destruct;
+ hdev->ioctl = btmrvl_ioctl;
+ hdev->owner = THIS_MODULE;
+
+ ret = hci_register_dev(hdev);
+ if (ret < 0) {
+ BT_ERR("Can not register HCI device");
+ goto err_hci_register_dev;
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ btmrvl_debugfs_init(hdev);
+#endif
+
+ return priv;
+
+err_hci_register_dev:
+ /* Stop the thread servicing the interrupts */
+ kthread_stop(priv->main_thread.task);
+
+ hci_free_dev(hdev);
+
+err_hdev:
+ btmrvl_free_adapter(priv);
+
+err_adapter:
+ kfree(priv);
+
+err_priv:
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(btmrvl_add_card);
+
+int btmrvl_remove_card(struct btmrvl_private *priv)
+{
+ struct hci_dev *hdev;
+
+ hdev = priv->btmrvl_dev.hcidev;
+
+ wake_up_interruptible(&priv->adapter->cmd_wait_q);
+
+ kthread_stop(priv->main_thread.task);
+
+#ifdef CONFIG_DEBUG_FS
+ btmrvl_debugfs_remove(hdev);
+#endif
+
+ hci_unregister_dev(hdev);
+
+ hci_free_dev(hdev);
+
+ priv->btmrvl_dev.hcidev = NULL;
+
+ btmrvl_free_adapter(priv);
+
+ kfree(priv);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_remove_card);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell Bluetooth driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
new file mode 100644
index 0000000..5b33b85
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -0,0 +1,1003 @@
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related functions.
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/firmware.h>
+
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+#include "btmrvl_sdio.h"
+
+#define VERSION "1.0"
+
+/* The btmrvl_sdio_remove() callback function is called
+ * when user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently.
+ * If the user is removing the module, a MODULE_SHUTDOWN_REQ
+ * command is sent to firmware and interrupt will be disabled.
+ * If the card is removed, there is no need to send command
+ * or disable interrupt.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
+ .helper = "sd8688_helper.bin",
+ .firmware = "sd8688.bin",
+};
+
+static const struct sdio_device_id btmrvl_sdio_ids[] = {
+ /* Marvell SD8688 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
+ .driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids);
+
+static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
+{
+ u8 reg;
+ int ret;
+
+ reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
+ if (!ret)
+ card->rx_unit = reg;
+
+ return ret;
+}
+
+static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
+{
+ u8 fws0, fws1;
+ int ret;
+
+ *dat = 0;
+
+ fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
+
+ if (!ret)
+ fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
+
+ if (ret)
+ return -EIO;
+
+ *dat = (((u16) fws1) << 8) | fws0;
+
+ return 0;
+}
+
+static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
+{
+ u8 reg;
+ int ret;
+
+ reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
+ if (!ret)
+ *dat = (u16) reg << card->rx_unit;
+
+ return ret;
+}
+
+static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
+ u8 mask)
+{
+ int ret;
+
+ sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
+ if (ret) {
+ BT_ERR("Unable to enable the host interrupt!");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
+ u8 mask)
+{
+ u8 host_int_mask;
+ int ret;
+
+ host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
+ if (ret)
+ return -EIO;
+
+ host_int_mask &= ~mask;
+
+ sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
+ if (ret < 0) {
+ BT_ERR("Unable to disable the host interrupt!");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
+{
+ unsigned int tries;
+ u8 status;
+ int ret;
+
+ for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
+ status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
+ if (ret)
+ goto failed;
+ if ((status & bits) == bits)
+ return ret;
+
+ udelay(1);
+ }
+
+ ret = -ETIMEDOUT;
+
+failed:
+ BT_ERR("FAILED! ret=%d", ret);
+
+ return ret;
+}
+
+static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
+ int pollnum)
+{
+ int ret = -ETIMEDOUT;
+ u16 firmwarestat;
+ unsigned int tries;
+
+ /* Wait for firmware to become ready */
+ for (tries = 0; tries < pollnum; tries++) {
+ if (btmrvl_sdio_read_fw_status(card, &firmwarestat) < 0)
+ continue;
+
+ if (firmwarestat == FIRMWARE_READY) {
+ ret = 0;
+ break;
+ } else {
+ msleep(10);
+ }
+ }
+
+ return ret;
+}
+
+static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
+{
+ const struct firmware *fw_helper = NULL;
+ const u8 *helper = NULL;
+ int ret;
+ void *tmphlprbuf = NULL;
+ int tmphlprbufsz, hlprblknow, helperlen;
+ u8 *helperbuf;
+ u32 tx_len;
+
+ ret = request_firmware(&fw_helper, card->helper,
+ &card->func->dev);
+ if ((ret < 0) || !fw_helper) {
+ BT_ERR("request_firmware(helper) failed, error code = %d",
+ ret);
+ ret = -ENOENT;
+ goto done;
+ }
+
+ helper = fw_helper->data;
+ helperlen = fw_helper->size;
+
+ BT_DBG("Downloading helper image (%d bytes), block size %d bytes",
+ helperlen, SDIO_BLOCK_SIZE);
+
+ tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+
+ tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL);
+ if (!tmphlprbuf) {
+ BT_ERR("Unable to allocate buffer for helper."
+ " Terminating download");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ memset(tmphlprbuf, 0, tmphlprbufsz);
+
+ helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN);
+
+ /* Perform helper data transfer */
+ tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE)
+ - SDIO_HEADER_LEN;
+ hlprblknow = 0;
+
+ do {
+ ret = btmrvl_sdio_poll_card_status(card,
+ CARD_IO_READY | DN_LD_CARD_RDY);
+ if (ret < 0) {
+ BT_ERR("Helper download poll status timeout @ %d",
+ hlprblknow);
+ goto done;
+ }
+
+ /* Check if there is more data? */
+ if (hlprblknow >= helperlen)
+ break;
+
+ if (helperlen - hlprblknow < tx_len)
+ tx_len = helperlen - hlprblknow;
+
+ /* Little-endian */
+ helperbuf[0] = ((tx_len & 0x000000ff) >> 0);
+ helperbuf[1] = ((tx_len & 0x0000ff00) >> 8);
+ helperbuf[2] = ((tx_len & 0x00ff0000) >> 16);
+ helperbuf[3] = ((tx_len & 0xff000000) >> 24);
+
+ memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow],
+ tx_len);
+
+ /* Now send the data */
+ ret = sdio_writesb(card->func, card->ioport, helperbuf,
+ FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE);
+ if (ret < 0) {
+ BT_ERR("IO error during helper download @ %d",
+ hlprblknow);
+ goto done;
+ }
+
+ hlprblknow += tx_len;
+ } while (true);
+
+ BT_DBG("Transferring helper image EOF block");
+
+ memset(helperbuf, 0x0, SDIO_BLOCK_SIZE);
+
+ ret = sdio_writesb(card->func, card->ioport, helperbuf,
+ SDIO_BLOCK_SIZE);
+ if (ret < 0) {
+ BT_ERR("IO error in writing helper image EOF block");
+ goto done;
+ }
+
+ ret = 0;
+
+done:
+ kfree(tmphlprbuf);
+ if (fw_helper)
+ release_firmware(fw_helper);
+
+ return ret;
+}
+
+static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
+{
+ const struct firmware *fw_firmware = NULL;
+ const u8 *firmware = NULL;
+ int firmwarelen, tmpfwbufsz, ret;
+ unsigned int tries, offset;
+ u8 base0, base1;
+ void *tmpfwbuf = NULL;
+ u8 *fwbuf;
+ u16 len;
+ int txlen = 0, tx_blocks = 0, count = 0;
+
+ ret = request_firmware(&fw_firmware, card->firmware,
+ &card->func->dev);
+ if ((ret < 0) || !fw_firmware) {
+ BT_ERR("request_firmware(firmware) failed, error code = %d",
+ ret);
+ ret = -ENOENT;
+ goto done;
+ }
+
+ firmware = fw_firmware->data;
+ firmwarelen = fw_firmware->size;
+
+ BT_DBG("Downloading FW image (%d bytes)", firmwarelen);
+
+ tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+ tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL);
+ if (!tmpfwbuf) {
+ BT_ERR("Unable to allocate buffer for firmware."
+ " Terminating download");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ memset(tmpfwbuf, 0, tmpfwbufsz);
+
+ /* Ensure aligned firmware buffer */
+ fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN);
+
+ /* Perform firmware data transfer */
+ offset = 0;
+ do {
+ ret = btmrvl_sdio_poll_card_status(card,
+ CARD_IO_READY | DN_LD_CARD_RDY);
+ if (ret < 0) {
+ BT_ERR("FW download with helper poll status"
+ " timeout @ %d", offset);
+ goto done;
+ }
+
+ /* Check if there is more data ? */
+ if (offset >= firmwarelen)
+ break;
+
+ for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+ base0 = sdio_readb(card->func,
+ SQ_READ_BASE_ADDRESS_A0_REG, &ret);
+ if (ret) {
+ BT_ERR("BASE0 register read failed:"
+ " base0 = 0x%04X(%d)."
+ " Terminating download",
+ base0, base0);
+ ret = -EIO;
+ goto done;
+ }
+ base1 = sdio_readb(card->func,
+ SQ_READ_BASE_ADDRESS_A1_REG, &ret);
+ if (ret) {
+ BT_ERR("BASE1 register read failed:"
+ " base1 = 0x%04X(%d)."
+ " Terminating download",
+ base1, base1);
+ ret = -EIO;
+ goto done;
+ }
+
+ len = (((u16) base1) << 8) | base0;
+ if (len)
+ break;
+
+ udelay(10);
+ }
+
+ if (!len)
+ break;
+ else if (len > BTM_UPLD_SIZE) {
+ BT_ERR("FW download failure @%d, invalid length %d",
+ offset, len);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ txlen = len;
+
+ if (len & BIT(0)) {
+ count++;
+ if (count > MAX_WRITE_IOMEM_RETRY) {
+ BT_ERR("FW download failure @%d, "
+ "over max retry count", offset);
+ ret = -EIO;
+ goto done;
+ }
+ BT_ERR("FW CRC error indicated by the helper: "
+ "len = 0x%04X, txlen = %d", len, txlen);
+ len &= ~BIT(0);
+ /* Set txlen to 0 so as to resend from same offset */
+ txlen = 0;
+ } else {
+ count = 0;
+
+ /* Last block ? */
+ if (firmwarelen - offset < txlen)
+ txlen = firmwarelen - offset;
+
+ tx_blocks =
+ (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
+
+ memcpy(fwbuf, &firmware[offset], txlen);
+ }
+
+ ret = sdio_writesb(card->func, card->ioport, fwbuf,
+ tx_blocks * SDIO_BLOCK_SIZE);
+
+ if (ret < 0) {
+ BT_ERR("FW download, writesb(%d) failed @%d",
+ count, offset);
+ sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
+ &ret);
+ if (ret)
+ BT_ERR("writeb failed (CFG)");
+ }
+
+ offset += txlen;
+ } while (true);
+
+ BT_DBG("FW download over, size %d bytes", offset);
+
+ ret = 0;
+
+done:
+ kfree(tmpfwbuf);
+
+ if (fw_firmware)
+ release_firmware(fw_firmware);
+
+ return ret;
+}
+
+static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
+{
+ u16 buf_len = 0;
+ int ret, buf_block_len, blksz;
+ struct sk_buff *skb = NULL;
+ u32 type;
+ u8 *payload = NULL;
+ struct hci_dev *hdev = priv->btmrvl_dev.hcidev;
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* Read the length of data to be transferred */
+ ret = btmrvl_sdio_read_rx_len(card, &buf_len);
+ if (ret < 0) {
+ BT_ERR("read rx_len failed");
+ ret = -EIO;
+ goto exit;
+ }
+
+ blksz = SDIO_BLOCK_SIZE;
+ buf_block_len = (buf_len + blksz - 1) / blksz;
+
+ if (buf_len <= SDIO_HEADER_LEN
+ || (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
+ BT_ERR("invalid packet length: %d", buf_len);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* Allocate buffer */
+ skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN,
+ GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ goto exit;
+ }
+
+ if ((unsigned long) skb->data & (BTSDIO_DMA_ALIGN - 1)) {
+ skb_put(skb, (unsigned long) skb->data &
+ (BTSDIO_DMA_ALIGN - 1));
+ skb_pull(skb, (unsigned long) skb->data &
+ (BTSDIO_DMA_ALIGN - 1));
+ }
+
+ payload = skb->data;
+
+ ret = sdio_readsb(card->func, payload, card->ioport,
+ buf_block_len * blksz);
+ if (ret < 0) {
+ BT_ERR("readsb failed: %d", ret);
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* This is SDIO specific header length: byte[2][1][0], type: byte[3]
+ * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor)
+ */
+
+ buf_len = payload[0];
+ buf_len |= (u16) payload[1] << 8;
+ type = payload[3];
+
+ switch (type) {
+ case HCI_ACLDATA_PKT:
+ case HCI_SCODATA_PKT:
+ case HCI_EVENT_PKT:
+ bt_cb(skb)->pkt_type = type;
+ skb->dev = (void *)hdev;
+ skb_put(skb, buf_len);
+ skb_pull(skb, SDIO_HEADER_LEN);
+
+ if (type == HCI_EVENT_PKT)
+ btmrvl_check_evtpkt(priv, skb);
+
+ hci_recv_frame(skb);
+ hdev->stat.byte_rx += buf_len;
+ break;
+
+ case MRVL_VENDOR_PKT:
+ bt_cb(skb)->pkt_type = HCI_VENDOR_PKT;
+ skb->dev = (void *)hdev;
+ skb_put(skb, buf_len);
+ skb_pull(skb, SDIO_HEADER_LEN);
+
+ if (btmrvl_process_event(priv, skb))
+ hci_recv_frame(skb);
+
+ hdev->stat.byte_rx += buf_len;
+ break;
+
+ default:
+ BT_ERR("Unknow packet type:%d", type);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
+ blksz * buf_block_len);
+
+ kfree_skb(skb);
+ skb = NULL;
+ break;
+ }
+
+exit:
+ if (ret) {
+ hdev->stat.err_rx++;
+ if (skb)
+ kfree_skb(skb);
+ }
+
+ return ret;
+}
+
+static int btmrvl_sdio_get_int_status(struct btmrvl_private *priv, u8 * ireg)
+{
+ int ret;
+ u8 sdio_ireg = 0;
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+ *ireg = 0;
+
+ sdio_ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
+ if (ret) {
+ BT_ERR("sdio_readb: read int status register failed");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (sdio_ireg != 0) {
+ /*
+ * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+ * Clear the interrupt status register and re-enable the
+ * interrupt.
+ */
+ BT_DBG("sdio_ireg = 0x%x", sdio_ireg);
+
+ sdio_writeb(card->func, ~(sdio_ireg) & (DN_LD_HOST_INT_STATUS |
+ UP_LD_HOST_INT_STATUS),
+ HOST_INTSTATUS_REG, &ret);
+ if (ret) {
+ BT_ERR("sdio_writeb: clear int status register "
+ "failed");
+ ret = -EIO;
+ goto done;
+ }
+ }
+
+ if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
+ if (priv->btmrvl_dev.tx_dnld_rdy)
+ BT_DBG("tx_done already received: "
+ " int_status=0x%x", sdio_ireg);
+ else
+ priv->btmrvl_dev.tx_dnld_rdy = true;
+ }
+
+ if (sdio_ireg & UP_LD_HOST_INT_STATUS)
+ btmrvl_sdio_card_to_host(priv);
+
+ *ireg = sdio_ireg;
+
+ ret = 0;
+
+done:
+ return ret;
+}
+
+static void btmrvl_sdio_interrupt(struct sdio_func *func)
+{
+ struct btmrvl_private *priv;
+ struct hci_dev *hcidev;
+ struct btmrvl_sdio_card *card;
+ u8 ireg = 0;
+
+ card = sdio_get_drvdata(func);
+ if (card && card->priv) {
+ priv = card->priv;
+ hcidev = priv->btmrvl_dev.hcidev;
+
+ if (btmrvl_sdio_get_int_status(priv, &ireg))
+ BT_ERR("reading HOST_INT_STATUS_REG failed");
+ else
+ BT_DBG("HOST_INT_STATUS_REG %#x", ireg);
+
+ btmrvl_interrupt(priv);
+ }
+}
+
+static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
+{
+ struct sdio_func *func;
+ u8 reg;
+ int ret = 0;
+
+ if (!card || !card->func) {
+ BT_ERR("Error: card or function is NULL!");
+ ret = -EINVAL;
+ goto failed;
+ }
+
+ func = card->func;
+
+ sdio_claim_host(func);
+
+ ret = sdio_enable_func(func);
+ if (ret) {
+ BT_ERR("sdio_enable_func() failed: ret=%d", ret);
+ ret = -EIO;
+ goto release_host;
+ }
+
+ ret = sdio_claim_irq(func, btmrvl_sdio_interrupt);
+ if (ret) {
+ BT_ERR("sdio_claim_irq failed: ret=%d", ret);
+ ret = -EIO;
+ goto disable_func;
+ }
+
+ ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE);
+ if (ret) {
+ BT_ERR("cannot set SDIO block size");
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ reg = sdio_readb(func, IO_PORT_0_REG, &ret);
+ if (ret < 0) {
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ card->ioport = reg;
+
+ reg = sdio_readb(func, IO_PORT_1_REG, &ret);
+ if (ret < 0) {
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ card->ioport |= (reg << 8);
+
+ reg = sdio_readb(func, IO_PORT_2_REG, &ret);
+ if (ret < 0) {
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ card->ioport |= (reg << 16);
+
+ BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport);
+
+ sdio_set_drvdata(func, card);
+
+ sdio_release_host(func);
+
+ return 0;
+
+release_irq:
+ sdio_release_irq(func);
+
+disable_func:
+ sdio_disable_func(func);
+
+release_host:
+ sdio_release_host(func);
+
+failed:
+ return ret;
+}
+
+static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card)
+{
+ if (card && card->func) {
+ sdio_claim_host(card->func);
+ sdio_release_irq(card->func);
+ sdio_disable_func(card->func);
+ sdio_release_host(card->func);
+ sdio_set_drvdata(card->func, NULL);
+ }
+
+ return 0;
+}
+
+static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card)
+{
+ int ret;
+
+ if (!card || !card->func)
+ return -EINVAL;
+
+ sdio_claim_host(card->func);
+
+ ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE);
+
+ btmrvl_sdio_get_rx_unit(card);
+
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card)
+{
+ int ret;
+
+ if (!card || !card->func)
+ return -EINVAL;
+
+ sdio_claim_host(card->func);
+
+ ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE);
+
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
+ u8 *payload, u16 nb)
+{
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+ int ret = 0;
+ int buf_block_len;
+ int blksz;
+ int i = 0;
+ u8 *buf = NULL;
+ void *tmpbuf = NULL;
+ int tmpbufsz;
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ return -EINVAL;
+ }
+
+ buf = payload;
+ if ((unsigned long) payload & (BTSDIO_DMA_ALIGN - 1)) {
+ tmpbufsz = ALIGN_SZ(nb, BTSDIO_DMA_ALIGN);
+ tmpbuf = kzalloc(tmpbufsz, GFP_KERNEL);
+ if (!tmpbuf)
+ return -ENOMEM;
+ buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN);
+ memcpy(buf, payload, nb);
+ }
+
+ blksz = SDIO_BLOCK_SIZE;
+ buf_block_len = (nb + blksz - 1) / blksz;
+
+ sdio_claim_host(card->func);
+
+ do {
+ /* Transfer data to card */
+ ret = sdio_writesb(card->func, card->ioport, buf,
+ buf_block_len * blksz);
+ if (ret < 0) {
+ i++;
+ BT_ERR("i=%d writesb failed: %d", i, ret);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
+ payload, nb);
+ ret = -EIO;
+ if (i > MAX_WRITE_IOMEM_RETRY)
+ goto exit;
+ }
+ } while (ret);
+
+ priv->btmrvl_dev.tx_dnld_rdy = false;
+
+exit:
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
+{
+ int ret = 0;
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ return -EINVAL;
+ }
+ sdio_claim_host(card->func);
+
+ if (!btmrvl_sdio_verify_fw_download(card, 1)) {
+ BT_DBG("Firmware already downloaded!");
+ goto done;
+ }
+
+ ret = btmrvl_sdio_download_helper(card);
+ if (ret) {
+ BT_ERR("Failed to download helper!");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (btmrvl_sdio_download_fw_w_helper(card)) {
+ BT_ERR("Failed to download firmware!");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
+ BT_ERR("FW failed to be active in time!");
+ ret = -ETIMEDOUT;
+ goto done;
+ }
+
+done:
+ sdio_release_host(card->func);
+
+ return ret;
+}
+
+static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
+{
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+ int ret = 0;
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ return -EINVAL;
+ }
+
+ sdio_claim_host(card->func);
+
+ sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
+
+ sdio_release_host(card->func);
+
+ BT_DBG("wake up firmware");
+
+ return ret;
+}
+
+static int btmrvl_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ int ret = 0;
+ struct btmrvl_private *priv = NULL;
+ struct btmrvl_sdio_card *card = NULL;
+
+ BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d",
+ id->vendor, id->device, id->class, func->num);
+
+ card = kzalloc(sizeof(*card), GFP_KERNEL);
+ if (!card) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ card->func = func;
+
+ if (id->driver_data) {
+ struct btmrvl_sdio_device *data = (void *) id->driver_data;
+ card->helper = data->helper;
+ card->firmware = data->firmware;
+ }
+
+ if (btmrvl_sdio_register_dev(card) < 0) {
+ BT_ERR("Failed to register BT device!");
+ ret = -ENODEV;
+ goto free_card;
+ }
+
+ /* Disable the interrupts on the card */
+ btmrvl_sdio_disable_host_int(card);
+
+ if (btmrvl_sdio_download_fw(card)) {
+ BT_ERR("Downloading firmware failed!");
+ ret = -ENODEV;
+ goto unreg_dev;
+ }
+
+ msleep(100);
+
+ btmrvl_sdio_enable_host_int(card);
+
+ priv = btmrvl_add_card(card);
+ if (!priv) {
+ BT_ERR("Initializing card failed!");
+ ret = -ENODEV;
+ goto disable_host_int;
+ }
+
+ card->priv = priv;
+
+ /* Initialize the interface specific function pointers */
+ priv->hw_host_to_card = btmrvl_sdio_host_to_card;
+ priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
+
+ btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+
+ return 0;
+
+disable_host_int:
+ btmrvl_sdio_disable_host_int(card);
+unreg_dev:
+ btmrvl_sdio_unregister_dev(card);
+free_card:
+ kfree(card);
+done:
+ return ret;
+}
+
+static void btmrvl_sdio_remove(struct sdio_func *func)
+{
+ struct btmrvl_sdio_card *card;
+
+ if (func) {
+ card = sdio_get_drvdata(func);
+ if (card) {
+ /* Send SHUTDOWN command & disable interrupt
+ * if user removes the module.
+ */
+ if (user_rmmod) {
+ btmrvl_send_module_cfg_cmd(card->priv,
+ MODULE_SHUTDOWN_REQ);
+ btmrvl_sdio_disable_host_int(card);
+ }
+ BT_DBG("unregester dev");
+ btmrvl_sdio_unregister_dev(card);
+ btmrvl_remove_card(card->priv);
+ kfree(card);
+ }
+ }
+}
+
+static struct sdio_driver bt_mrvl_sdio = {
+ .name = "btmrvl_sdio",
+ .id_table = btmrvl_sdio_ids,
+ .probe = btmrvl_sdio_probe,
+ .remove = btmrvl_sdio_remove,
+};
+
+static int btmrvl_sdio_init_module(void)
+{
+ if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
+ BT_ERR("SDIO Driver Registration Failed");
+ return -ENODEV;
+ }
+
+ /* Clear the flag in case user removes the card. */
+ user_rmmod = 0;
+
+ return 0;
+}
+
+static void btmrvl_sdio_exit_module(void)
+{
+ /* Set the flag as user is removing this module. */
+ user_rmmod = 1;
+
+ sdio_unregister_driver(&bt_mrvl_sdio);
+}
+
+module_init(btmrvl_sdio_init_module);
+module_exit(btmrvl_sdio_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
new file mode 100644
index 0000000..27329f1
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -0,0 +1,108 @@
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related definitions
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ *
+ **/
+
+#define SDIO_HEADER_LEN 4
+
+/* SD block size can not bigger than 64 due to buf size limit in firmware */
+/* define SD block size for data Tx/Rx */
+#define SDIO_BLOCK_SIZE 64
+
+/* Number of blocks for firmware transfer */
+#define FIRMWARE_TRANSFER_NBLOCK 2
+
+/* This is for firmware specific length */
+#define FW_EXTRA_LEN 36
+
+#define MRVDRV_SIZE_OF_CMD_BUFFER (2 * 1024)
+
+#define MRVDRV_BT_RX_PACKET_BUFFER_SIZE \
+ (HCI_MAX_FRAME_SIZE + FW_EXTRA_LEN)
+
+#define ALLOC_BUF_SIZE (((max_t (int, MRVDRV_BT_RX_PACKET_BUFFER_SIZE, \
+ MRVDRV_SIZE_OF_CMD_BUFFER) + SDIO_HEADER_LEN \
+ + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE) \
+ * SDIO_BLOCK_SIZE)
+
+/* The number of times to try when polling for status */
+#define MAX_POLL_TRIES 100
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY 2
+
+/* Host Control Registers */
+#define IO_PORT_0_REG 0x00
+#define IO_PORT_1_REG 0x01
+#define IO_PORT_2_REG 0x02
+
+#define CONFIG_REG 0x03
+#define HOST_POWER_UP BIT(1)
+#define HOST_CMD53_FIN BIT(2)
+
+#define HOST_INT_MASK_REG 0x04
+#define HIM_DISABLE 0xff
+#define HIM_ENABLE (BIT(0) | BIT(1))
+
+#define HOST_INTSTATUS_REG 0x05
+#define UP_LD_HOST_INT_STATUS BIT(0)
+#define DN_LD_HOST_INT_STATUS BIT(1)
+
+/* Card Control Registers */
+#define SQ_READ_BASE_ADDRESS_A0_REG 0x10
+#define SQ_READ_BASE_ADDRESS_A1_REG 0x11
+
+#define CARD_STATUS_REG 0x20
+#define DN_LD_CARD_RDY BIT(0)
+#define CARD_IO_READY BIT(3)
+
+#define CARD_FW_STATUS0_REG 0x40
+#define CARD_FW_STATUS1_REG 0x41
+#define FIRMWARE_READY 0xfedc
+
+#define CARD_RX_LEN_REG 0x42
+#define CARD_RX_UNIT_REG 0x43
+
+
+struct btmrvl_sdio_card {
+ struct sdio_func *func;
+ u32 ioport;
+ const char *helper;
+ const char *firmware;
+ u8 rx_unit;
+ struct btmrvl_private *priv;
+};
+
+struct btmrvl_sdio_device {
+ const char *helper;
+ const char *firmware;
+};
+
+
+/* Platform specific DMA alignment */
+#define BTSDIO_DMA_ALIGN 8
+
+/* Macros for Data Alignment : size */
+#define ALIGN_SZ(p, a) \
+ (((p) + ((a) - 1)) & ~((a) - 1))
+
+/* Macros for Data Alignment : address */
+#define ALIGN_ADDR(p, a) \
+ ((((unsigned long)(p)) + (((unsigned long)(a)) - 1)) & \
+ ~(((unsigned long)(a)) - 1))
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index e70c57e..7ba91aa 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -35,7 +35,7 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
-#define VERSION "0.5"
+#define VERSION "0.6"
static int ignore_dga;
static int ignore_csr;
@@ -145,6 +145,7 @@
#define BTUSB_INTR_RUNNING 0
#define BTUSB_BULK_RUNNING 1
#define BTUSB_ISOC_RUNNING 2
+#define BTUSB_SUSPENDING 3
struct btusb_data {
struct hci_dev *hdev;
@@ -157,11 +158,15 @@
unsigned long flags;
struct work_struct work;
+ struct work_struct waker;
struct usb_anchor tx_anchor;
struct usb_anchor intr_anchor;
struct usb_anchor bulk_anchor;
struct usb_anchor isoc_anchor;
+ struct usb_anchor deferred;
+ int tx_in_flight;
+ spinlock_t txlock;
struct usb_endpoint_descriptor *intr_ep;
struct usb_endpoint_descriptor *bulk_tx_ep;
@@ -174,8 +179,23 @@
unsigned int sco_num;
int isoc_altsetting;
int suspend_count;
+ int did_iso_resume:1;
};
+static int inc_tx(struct btusb_data *data)
+{
+ unsigned long flags;
+ int rv;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rv = test_bit(BTUSB_SUSPENDING, &data->flags);
+ if (!rv)
+ data->tx_in_flight++;
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rv;
+}
+
static void btusb_intr_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
@@ -202,6 +222,7 @@
if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
return;
+ usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->intr_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -301,7 +322,7 @@
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
- int err, size;
+ int err, size = HCI_MAX_FRAME_SIZE;
BT_DBG("%s", hdev->name);
@@ -312,8 +333,6 @@
if (!urb)
return -ENOMEM;
- size = le16_to_cpu(data->bulk_rx_ep->wMaxPacketSize);
-
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
@@ -327,6 +346,7 @@
urb->transfer_flags |= URB_FREE_BUFFER;
+ usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->bulk_anchor);
err = usb_submit_urb(urb, mem_flags);
@@ -465,6 +485,33 @@
{
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+ struct btusb_data *data = hdev->driver_data;
+
+ BT_DBG("%s urb %p status %d count %d", hdev->name,
+ urb, urb->status, urb->actual_length);
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ goto done;
+
+ if (!urb->status)
+ hdev->stat.byte_tx += urb->transfer_buffer_length;
+ else
+ hdev->stat.err_tx++;
+
+done:
+ spin_lock(&data->txlock);
+ data->tx_in_flight--;
+ spin_unlock(&data->txlock);
+
+ kfree(urb->setup_packet);
+
+ kfree_skb(skb);
+}
+
+static void btusb_isoc_tx_complete(struct urb *urb)
+{
+ struct sk_buff *skb = urb->context;
+ struct hci_dev *hdev = (struct hci_dev *) skb->dev;
BT_DBG("%s urb %p status %d count %d", hdev->name,
urb, urb->status, urb->actual_length);
@@ -490,11 +537,17 @@
BT_DBG("%s", hdev->name);
+ err = usb_autopm_get_interface(data->intf);
+ if (err < 0)
+ return err;
+
+ data->intf->needs_remote_wakeup = 1;
+
if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
- return 0;
+ goto done;
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
- return 0;
+ goto done;
err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
if (err < 0)
@@ -509,17 +562,28 @@
set_bit(BTUSB_BULK_RUNNING, &data->flags);
btusb_submit_bulk_urb(hdev, GFP_KERNEL);
+done:
+ usb_autopm_put_interface(data->intf);
return 0;
failed:
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
clear_bit(HCI_RUNNING, &hdev->flags);
+ usb_autopm_put_interface(data->intf);
return err;
}
+static void btusb_stop_traffic(struct btusb_data *data)
+{
+ usb_kill_anchored_urbs(&data->intr_anchor);
+ usb_kill_anchored_urbs(&data->bulk_anchor);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
+}
+
static int btusb_close(struct hci_dev *hdev)
{
struct btusb_data *data = hdev->driver_data;
+ int err;
BT_DBG("%s", hdev->name);
@@ -529,13 +593,16 @@
cancel_work_sync(&data->work);
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
- usb_kill_anchored_urbs(&data->isoc_anchor);
-
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
- usb_kill_anchored_urbs(&data->bulk_anchor);
-
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
- usb_kill_anchored_urbs(&data->intr_anchor);
+
+ btusb_stop_traffic(data);
+ err = usb_autopm_get_interface(data->intf);
+ if (err < 0)
+ return 0;
+
+ data->intf->needs_remote_wakeup = 0;
+ usb_autopm_put_interface(data->intf);
return 0;
}
@@ -622,7 +689,7 @@
urb->dev = data->udev;
urb->pipe = pipe;
urb->context = skb;
- urb->complete = btusb_tx_complete;
+ urb->complete = btusb_isoc_tx_complete;
urb->interval = data->isoc_tx_ep->bInterval;
urb->transfer_flags = URB_ISO_ASAP;
@@ -633,12 +700,21 @@
le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
hdev->stat.sco_tx++;
- break;
+ goto skip_waking;
default:
return -EILSEQ;
}
+ err = inc_tx(data);
+ if (err) {
+ usb_anchor_urb(urb, &data->deferred);
+ schedule_work(&data->waker);
+ err = 0;
+ goto done;
+ }
+
+skip_waking:
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -646,10 +722,13 @@
BT_ERR("%s urb %p submission failed", hdev->name, urb);
kfree(urb->setup_packet);
usb_unanchor_urb(urb);
+ } else {
+ usb_mark_last_busy(data->udev);
}
usb_free_urb(urb);
+done:
return err;
}
@@ -721,8 +800,19 @@
{
struct btusb_data *data = container_of(work, struct btusb_data, work);
struct hci_dev *hdev = data->hdev;
+ int err;
if (hdev->conn_hash.sco_num > 0) {
+ if (!data->did_iso_resume) {
+ err = usb_autopm_get_interface(data->isoc);
+ if (err < 0) {
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
+ return;
+ }
+
+ data->did_iso_resume = 1;
+ }
if (data->isoc_altsetting != 2) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
@@ -742,9 +832,25 @@
usb_kill_anchored_urbs(&data->isoc_anchor);
__set_isoc_interface(hdev, 0);
+ if (data->did_iso_resume) {
+ data->did_iso_resume = 0;
+ usb_autopm_put_interface(data->isoc);
+ }
}
}
+static void btusb_waker(struct work_struct *work)
+{
+ struct btusb_data *data = container_of(work, struct btusb_data, waker);
+ int err;
+
+ err = usb_autopm_get_interface(data->intf);
+ if (err < 0)
+ return;
+
+ usb_autopm_put_interface(data->intf);
+}
+
static int btusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -814,11 +920,14 @@
spin_lock_init(&data->lock);
INIT_WORK(&data->work, btusb_work);
+ INIT_WORK(&data->waker, btusb_waker);
+ spin_lock_init(&data->txlock);
init_usb_anchor(&data->tx_anchor);
init_usb_anchor(&data->intr_anchor);
init_usb_anchor(&data->bulk_anchor);
init_usb_anchor(&data->isoc_anchor);
+ init_usb_anchor(&data->deferred);
hdev = hci_alloc_dev();
if (!hdev) {
@@ -943,6 +1052,7 @@
hci_free_dev(hdev);
}
+#ifdef CONFIG_PM
static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct btusb_data *data = usb_get_intfdata(intf);
@@ -952,22 +1062,44 @@
if (data->suspend_count++)
return 0;
+ spin_lock_irq(&data->txlock);
+ if (!(interface_to_usbdev(intf)->auto_pm && data->tx_in_flight)) {
+ set_bit(BTUSB_SUSPENDING, &data->flags);
+ spin_unlock_irq(&data->txlock);
+ } else {
+ spin_unlock_irq(&data->txlock);
+ data->suspend_count--;
+ return -EBUSY;
+ }
+
cancel_work_sync(&data->work);
+ btusb_stop_traffic(data);
usb_kill_anchored_urbs(&data->tx_anchor);
- usb_kill_anchored_urbs(&data->isoc_anchor);
- usb_kill_anchored_urbs(&data->bulk_anchor);
- usb_kill_anchored_urbs(&data->intr_anchor);
-
return 0;
}
+static void play_deferred(struct btusb_data *data)
+{
+ struct urb *urb;
+ int err;
+
+ while ((urb = usb_get_from_anchor(&data->deferred))) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0)
+ break;
+
+ data->tx_in_flight++;
+ }
+ usb_scuttle_anchored_urbs(&data->deferred);
+}
+
static int btusb_resume(struct usb_interface *intf)
{
struct btusb_data *data = usb_get_intfdata(intf);
struct hci_dev *hdev = data->hdev;
- int err;
+ int err = 0;
BT_DBG("intf %p", intf);
@@ -975,13 +1107,13 @@
return 0;
if (!test_bit(HCI_RUNNING, &hdev->flags))
- return 0;
+ goto done;
if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
err = btusb_submit_intr_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
- return err;
+ goto failed;
}
}
@@ -989,9 +1121,10 @@
err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
- return err;
- } else
- btusb_submit_bulk_urb(hdev, GFP_NOIO);
+ goto failed;
+ }
+
+ btusb_submit_bulk_urb(hdev, GFP_NOIO);
}
if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
@@ -1001,16 +1134,35 @@
btusb_submit_isoc_urb(hdev, GFP_NOIO);
}
+ spin_lock_irq(&data->txlock);
+ play_deferred(data);
+ clear_bit(BTUSB_SUSPENDING, &data->flags);
+ spin_unlock_irq(&data->txlock);
+ schedule_work(&data->work);
+
return 0;
+
+failed:
+ usb_scuttle_anchored_urbs(&data->deferred);
+done:
+ spin_lock_irq(&data->txlock);
+ clear_bit(BTUSB_SUSPENDING, &data->flags);
+ spin_unlock_irq(&data->txlock);
+
+ return err;
}
+#endif
static struct usb_driver btusb_driver = {
.name = "btusb",
.probe = btusb_probe,
.disconnect = btusb_disconnect,
+#ifdef CONFIG_PM
.suspend = btusb_suspend,
.resume = btusb_resume,
+#endif
.id_table = btusb_table,
+ .supports_autosuspend = 1,
};
static int __init btusb_init(void)
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 894b2cb..40aec0f 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -373,8 +373,9 @@
i = 0;
skb_queue_walk_safe(&bcsp->unack, skb, tmp) {
- if (i++ >= pkts_to_be_removed)
+ if (i >= pkts_to_be_removed)
break;
+ i++;
__skb_unlink(skb, &bcsp->unack);
kfree_skb(skb);
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 8c9d50d..c585577 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -49,6 +49,7 @@
#define PCI_DEVICE_ID_INTEL_IGDNG_D_HB 0x0040
#define PCI_DEVICE_ID_INTEL_IGDNG_D_IG 0x0042
#define PCI_DEVICE_ID_INTEL_IGDNG_M_HB 0x0044
+#define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB 0x0062
#define PCI_DEVICE_ID_INTEL_IGDNG_M_IG 0x0046
/* cover 915 and 945 variants */
@@ -81,7 +82,8 @@
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB)
extern int agp_memory_reserved;
@@ -1216,6 +1218,7 @@
case PCI_DEVICE_ID_INTEL_G41_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
+ case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB:
*gtt_offset = *gtt_size = MB(2);
break;
default:
@@ -2195,6 +2198,8 @@
"IGDNG/D", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
"IGDNG/M", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
+ "IGDNG/MA", NULL, &intel_i965_driver },
{ 0, 0, 0, NULL, NULL, NULL }
};
@@ -2398,6 +2403,7 @@
ID(PCI_DEVICE_ID_INTEL_G41_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
+ ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB),
{ }
};
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 86105ef..0ecac7e 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -1006,7 +1006,7 @@
priv->dev->release = (void (*)(struct device *)) kfree;
rc = device_register(priv->dev);
if (rc) {
- kfree(priv->dev);
+ put_device(priv->dev);
goto out_error_dev;
}
diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c
index cd0ba51..0d8c578 100644
--- a/drivers/char/hw_random/amd-rng.c
+++ b/drivers/char/hw_random/amd-rng.c
@@ -44,8 +44,8 @@
* want to register another driver on the same PCI id.
*/
static const struct pci_device_id pci_tbl[] = {
- { 0x1022, 0x7443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { 0x1022, 0x746b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(AMD, 0x7443), 0, },
+ { PCI_VDEVICE(AMD, 0x746b), 0, },
{ 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c
index 64d513f..4c4d4e1 100644
--- a/drivers/char/hw_random/geode-rng.c
+++ b/drivers/char/hw_random/geode-rng.c
@@ -46,8 +46,7 @@
* want to register another driver on the same PCI id.
*/
static const struct pci_device_id pci_tbl[] = {
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LX_AES,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_LX_AES), 0, },
{ 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index afa8813..645237b 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -822,6 +822,7 @@
* - permits private mappings, "copies" are taken of the source of zeros
*/
static struct backing_dev_info zero_bdi = {
+ .name = "char/mem",
.capabilities = BDI_CAP_MAP_COPY,
};
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 973be2f..4e28b35 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -300,8 +300,7 @@
if (space < 2)
return -1;
tty->canon_column = tty->column = 0;
- tty_put_char(tty, '\r');
- tty_put_char(tty, c);
+ tty->ops->write(tty, "\r\n", 2);
return 2;
}
tty->canon_column = tty->column;
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 77b3648..caf6e4d 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -4005,10 +4005,9 @@
*
* skb socket buffer containing HDLC frame
* dev pointer to network device structure
- *
- * returns 0 if success, otherwise error code
*/
-static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
MGSLPC_INFO *info = dev_to_port(dev);
unsigned long flags;
@@ -4043,7 +4042,7 @@
}
spin_unlock_irqrestore(&info->lock,flags);
- return 0;
+ return NETDEV_TX_OK;
}
/**
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index d083c73..b33d668 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -109,21 +109,13 @@
* the other side of the pty/tty pair.
*/
-static int pty_write(struct tty_struct *tty, const unsigned char *buf,
- int count)
+static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
{
struct tty_struct *to = tty->link;
- int c;
if (tty->stopped)
return 0;
- /* This isn't locked but our 8K is quite sloppy so no
- big deal */
-
- c = pty_space(to);
- if (c > count)
- c = count;
if (c > 0) {
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to, buf, c);
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 8c74448..d8a9255 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -240,6 +240,7 @@
#include <linux/spinlock.h>
#include <linux/percpu.h>
#include <linux/cryptohash.h>
+#include <linux/fips.h>
#ifdef CONFIG_GENERIC_HARDIRQS
# include <linux/irq.h>
@@ -413,6 +414,7 @@
unsigned add_ptr;
int entropy_count;
int input_rotate;
+ __u8 *last_data;
};
static __u32 input_pool_data[INPUT_POOL_WORDS];
@@ -852,12 +854,21 @@
{
ssize_t ret = 0, i;
__u8 tmp[EXTRACT_SIZE];
+ unsigned long flags;
xfer_secondary_pool(r, nbytes);
nbytes = account(r, nbytes, min, reserved);
while (nbytes) {
extract_buf(r, tmp);
+
+ if (r->last_data) {
+ spin_lock_irqsave(&r->lock, flags);
+ if (!memcmp(tmp, r->last_data, EXTRACT_SIZE))
+ panic("Hardware RNG duplicated output!\n");
+ memcpy(r->last_data, tmp, EXTRACT_SIZE);
+ spin_unlock_irqrestore(&r->lock, flags);
+ }
i = min_t(int, nbytes, EXTRACT_SIZE);
memcpy(buf, tmp, i);
nbytes -= i;
@@ -940,6 +951,9 @@
now = ktime_get_real();
mix_pool_bytes(r, &now, sizeof(now));
mix_pool_bytes(r, utsname(), sizeof(*(utsname())));
+ /* Enable continuous test in fips mode */
+ if (fips_enabled)
+ r->last_data = kmalloc(EXTRACT_SIZE, GFP_KERNEL);
}
static int rand_initialize(void)
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 05f9d18..40268db 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -246,7 +246,7 @@
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.write = do_sync_write,
- .aio_write = generic_file_aio_write_nolock,
+ .aio_write = blkdev_aio_write,
.open = raw_open,
.release= raw_release,
.ioctl = raw_ioctl,
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 51e7a46..5942a9d 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -171,7 +171,6 @@
static void cy_throttle(struct tty_struct *);
static void cy_unthrottle(struct tty_struct *);
static void config_setup(struct cyclades_port *);
-extern void console_print(const char *);
#ifdef CYCLOM_SHOW_STATUS
static void show_status(int);
#endif
@@ -245,7 +244,7 @@
{
unsigned long flags;
local_irq_save(flags);
- console_print(data);
+ printk(KERN_EMERG "%s", data);
local_irq_restore(flags);
}
@@ -255,7 +254,7 @@
unsigned long flags;
local_irq_save(flags);
scrn[0] = data;
- console_print(scrn);
+ printk(KERN_EMERG "%c", scrn);
local_irq_restore(flags);
} /* CP */
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 813552f..4846b73 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -7697,10 +7697,9 @@
*
* skb socket buffer containing HDLC frame
* dev pointer to network device structure
- *
- * returns 0 if success, otherwise error code
*/
-static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct mgsl_struct *info = dev_to_port(dev);
unsigned long flags;
@@ -7731,7 +7730,7 @@
usc_start_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
- return 0;
+ return NETDEV_TX_OK;
}
/**
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 91f20a9..8678f0c 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1497,10 +1497,9 @@
*
* skb socket buffer containing HDLC frame
* dev pointer to network device structure
- *
- * returns 0 if success, otherwise error code
*/
-static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct slgt_info *info = dev_to_port(dev);
unsigned long flags;
@@ -1529,7 +1528,7 @@
update_tx_timer(info);
spin_unlock_irqrestore(&info->lock,flags);
- return 0;
+ return NETDEV_TX_OK;
}
/**
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 8d4a2a8..2b18adc 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -1608,10 +1608,9 @@
*
* skb socket buffer containing HDLC frame
* dev pointer to network device structure
- *
- * returns 0 if success, otherwise error code
*/
-static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
SLMP_INFO *info = dev_to_port(dev);
unsigned long flags;
@@ -1642,7 +1641,7 @@
tx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
- return 0;
+ return NETDEV_TX_OK;
}
/**
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 5d7a02f..50eecfe 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -24,6 +24,7 @@
#include <linux/sysrq.h>
#include <linux/kbd_kern.h>
#include <linux/proc_fs.h>
+#include <linux/nmi.h>
#include <linux/quotaops.h>
#include <linux/perf_counter.h>
#include <linux/kernel.h>
@@ -222,12 +223,20 @@
static void sysrq_handle_showallcpus(int key, struct tty_struct *tty)
{
- struct pt_regs *regs = get_irq_regs();
- if (regs) {
- printk(KERN_INFO "CPU%d:\n", smp_processor_id());
- show_regs(regs);
+ /*
+ * Fall back to the workqueue based printing if the
+ * backtrace printing did not succeed or the
+ * architecture has no support for it:
+ */
+ if (!trigger_all_cpu_backtrace()) {
+ struct pt_regs *regs = get_irq_regs();
+
+ if (regs) {
+ printk(KERN_INFO "CPU%d:\n", smp_processor_id());
+ show_regs(regs);
+ }
+ schedule_work(&sysrq_showallcpus);
}
- schedule_work(&sysrq_showallcpus);
}
static struct sysrq_key_op sysrq_showallcpus_op = {
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index aec1931..0b73e4e 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -450,6 +450,12 @@
goto out_err;
}
+ /* Default timeouts */
+ chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+ chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
if (request_locality(chip, 0) != 0) {
rc = -ENODEV;
goto out_err;
@@ -457,12 +463,6 @@
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
- /* Default timeouts */
- chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
- chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
-
dev_info(dev,
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 1733d34..e48af9f 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -508,8 +508,9 @@
* be obtained while the delayed work queue halt ensures that no more
* data is fed to the ldisc.
*
- * In order to wait for any existing references to complete see
- * tty_ldisc_wait_idle.
+ * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex)
+ * in order to make sure any currently executing ldisc work is also
+ * flushed.
*/
static int tty_ldisc_halt(struct tty_struct *tty)
@@ -753,11 +754,14 @@
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* Make sure the old ldisc is quiescent */
+ tty_ldisc_halt(tty);
+ flush_scheduled_work();
+
/* Avoid racing set_ldisc or tty_ldisc_release */
mutex_lock(&tty->ldisc_mutex);
if (tty->ldisc) { /* Not yet closed */
/* Switch back to N_TTY */
- tty_ldisc_halt(tty);
tty_ldisc_reinit(tty);
/* At this point we have a closed ldisc and we want to
reopen it. We could defer this to the next open but
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index c5afc98..85e5dc0 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -202,9 +202,8 @@
* cn_proc_mcast_ctl
* @data: message sent from userspace via the connector
*/
-static void cn_proc_mcast_ctl(void *data)
+static void cn_proc_mcast_ctl(struct cn_msg *msg)
{
- struct cn_msg *msg = data;
enum proc_cn_mcast_op *mc_op = NULL;
int err = 0;
diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index 408c2af..4a1dfe1 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -87,7 +87,9 @@
kfree(d->free);
}
-static struct cn_callback_entry *cn_queue_alloc_callback_entry(char *name, struct cb_id *id, void (*callback)(void *))
+static struct cn_callback_entry *
+cn_queue_alloc_callback_entry(char *name, struct cb_id *id,
+ void (*callback)(struct cn_msg *))
{
struct cn_callback_entry *cbq;
@@ -120,7 +122,8 @@
return ((i1->idx == i2->idx) && (i1->val == i2->val));
}
-int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *))
+int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id,
+ void (*callback)(struct cn_msg *))
{
struct cn_callback_entry *cbq, *__cbq;
int found = 0;
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 08b2500..74f52af 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -269,7 +269,8 @@
*
* May sleep.
*/
-int cn_add_callback(struct cb_id *id, char *name, void (*callback)(void *))
+int cn_add_callback(struct cb_id *id, char *name,
+ void (*callback)(struct cn_msg *))
{
int err;
struct cn_dev *dev = &cdev;
@@ -351,9 +352,8 @@
*
* Used for notification of a request's processing.
*/
-static void cn_callback(void *data)
+static void cn_callback(struct cn_msg *msg)
{
- struct cn_msg *msg = data;
struct cn_ctl_msg *ctl;
struct cn_ctl_entry *ent;
u32 size;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index fd69086..2968ed6 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1250,20 +1250,11 @@
{
int ret = 0;
-#ifdef __powerpc__
int cpu = sysdev->id;
- unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
- /*
- * This whole bogosity is here because Powerbooks are made of fail.
- * No sane platform should need any of the code below to be run.
- * (it's entirely the wrong thing to do, as driver->get may
- * reenable interrupts on some architectures).
- */
-
if (!cpu_online(cpu))
return 0;
@@ -1282,47 +1273,13 @@
if (cpufreq_driver->suspend) {
ret = cpufreq_driver->suspend(cpu_policy, pmsg);
- if (ret) {
+ if (ret)
printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
"step on CPU %u\n", cpu_policy->cpu);
- goto out;
- }
- }
-
- if (cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)
- goto out;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: suspend failed to assert current "
- "frequency is what timing core thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency is %u, "
- "cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
- CPUFREQ_SUSPENDCHANGE, &freqs);
- adjust_jiffies(CPUFREQ_SUSPENDCHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
}
out:
cpufreq_cpu_put(cpu_policy);
-#endif /* __powerpc__ */
return ret;
}
@@ -1330,24 +1287,21 @@
* cpufreq_resume - restore proper CPU frequency handling after resume
*
* 1.) resume CPUfreq hardware support (cpufreq_driver->resume())
- * 2.) if ->target and !CPUFREQ_CONST_LOOPS: verify we're in sync
- * 3.) schedule call cpufreq_update_policy() ASAP as interrupts are
- * restored.
+ * 2.) schedule call cpufreq_update_policy() ASAP as interrupts are
+ * restored. It will verify that the current freq is in sync with
+ * what we believe it to be. This is a bit later than when it
+ * should be, but nonethteless it's better than calling
+ * cpufreq_driver->get() here which might re-enable interrupts...
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
int ret = 0;
-#ifdef __powerpc__
int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
- /* As with the ->suspend method, all the code below is
- * only necessary because Powerbooks suck.
- * See commit 42d4dc3f4e1e for jokes. */
-
if (!cpu_online(cpu))
return 0;
@@ -1373,45 +1327,10 @@
}
}
- if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- unsigned int cur_freq = 0;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: resume failed to assert "
- "current frequency is what timing core "
- "thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency "
- "is %u, cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(
- &cpufreq_transition_notifier_list,
- CPUFREQ_RESUMECHANGE, &freqs);
- adjust_jiffies(CPUFREQ_RESUMECHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
- }
- }
-
-out:
schedule_work(&cpu_policy->update);
+
fail:
cpufreq_cpu_put(cpu_policy);
-#endif /* __powerpc__ */
return ret;
}
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 5b27692..b08403d 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -13,7 +13,6 @@
config CRYPTO_DEV_PADLOCK
tristate "Support for VIA PadLock ACE"
depends on X86 && !UML
- select CRYPTO_ALGAPI
help
Some VIA processors come with an integrated crypto engine
(so called VIA PadLock ACE, Advanced Cryptography Engine)
@@ -39,6 +38,7 @@
config CRYPTO_DEV_PADLOCK_SHA
tristate "PadLock driver for SHA1 and SHA256 algorithms"
depends on CRYPTO_DEV_PADLOCK
+ select CRYPTO_HASH
select CRYPTO_SHA1
select CRYPTO_SHA256
help
@@ -157,6 +157,19 @@
ANSI X9.17 standard. The PRNG is usable via the char device
/dev/prandom.
+config CRYPTO_DEV_MV_CESA
+ tristate "Marvell's Cryptographic Engine"
+ depends on PLAT_ORION
+ select CRYPTO_ALGAPI
+ select CRYPTO_AES
+ select CRYPTO_BLKCIPHER2
+ help
+ This driver allows you to utilize the Cryptographic Engines and
+ Security Accelerator (CESA) which can be found on the Marvell Orion
+ and Kirkwood SoCs, such as QNAP's TS-209.
+
+ Currently the driver supports AES in ECB and CBC mode without DMA.
+
config CRYPTO_DEV_HIFN_795X
tristate "Driver HIFN 795x crypto accelerator chips"
select CRYPTO_DES
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 9bf4a2b..6ffcb3f 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
+obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
diff --git a/drivers/crypto/amcc/crypto4xx_alg.c b/drivers/crypto/amcc/crypto4xx_alg.c
index 61b6e1b..a33243c 100644
--- a/drivers/crypto/amcc/crypto4xx_alg.c
+++ b/drivers/crypto/amcc/crypto4xx_alg.c
@@ -208,7 +208,8 @@
}
}
- tfm->crt_ahash.reqsize = sizeof(struct crypto4xx_ctx);
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct crypto4xx_ctx));
sa = (struct dynamic_sa_ctl *) ctx->sa_in;
set_dynamic_sa_command_0(sa, SA_SAVE_HASH, SA_NOT_SAVE_IV,
SA_NOT_LOAD_HASH, SA_LOAD_IV_FROM_SA,
diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
index 4c0dfb2..46e899a 100644
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -31,8 +31,6 @@
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
#include <asm/cacheflush.h>
-#include <crypto/internal/hash.h>
-#include <crypto/algapi.h>
#include <crypto/aes.h>
#include <crypto/sha.h>
#include "crypto4xx_reg_def.h"
@@ -998,10 +996,15 @@
ctx->sa_out_dma_addr = 0;
ctx->sa_len = 0;
- if (alg->cra_type == &crypto_ablkcipher_type)
+ switch (alg->cra_flags & CRYPTO_ALG_TYPE_MASK) {
+ default:
tfm->crt_ablkcipher.reqsize = sizeof(struct crypto4xx_ctx);
- else if (alg->cra_type == &crypto_ahash_type)
- tfm->crt_ahash.reqsize = sizeof(struct crypto4xx_ctx);
+ break;
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct crypto4xx_ctx));
+ break;
+ }
return 0;
}
@@ -1015,7 +1018,8 @@
}
int crypto4xx_register_alg(struct crypto4xx_device *sec_dev,
- struct crypto_alg *crypto_alg, int array_size)
+ struct crypto4xx_alg_common *crypto_alg,
+ int array_size)
{
struct crypto4xx_alg *alg;
int i;
@@ -1027,13 +1031,18 @@
return -ENOMEM;
alg->alg = crypto_alg[i];
- INIT_LIST_HEAD(&alg->alg.cra_list);
- if (alg->alg.cra_init == NULL)
- alg->alg.cra_init = crypto4xx_alg_init;
- if (alg->alg.cra_exit == NULL)
- alg->alg.cra_exit = crypto4xx_alg_exit;
alg->dev = sec_dev;
- rc = crypto_register_alg(&alg->alg);
+
+ switch (alg->alg.type) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ rc = crypto_register_ahash(&alg->alg.u.hash);
+ break;
+
+ default:
+ rc = crypto_register_alg(&alg->alg.u.cipher);
+ break;
+ }
+
if (rc) {
list_del(&alg->entry);
kfree(alg);
@@ -1051,7 +1060,14 @@
list_for_each_entry_safe(alg, tmp, &sec_dev->alg_list, entry) {
list_del(&alg->entry);
- crypto_unregister_alg(&alg->alg);
+ switch (alg->alg.type) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ crypto_unregister_ahash(&alg->alg.u.hash);
+ break;
+
+ default:
+ crypto_unregister_alg(&alg->alg.u.cipher);
+ }
kfree(alg);
}
}
@@ -1104,17 +1120,18 @@
/**
* Supported Crypto Algorithms
*/
-struct crypto_alg crypto4xx_alg[] = {
+struct crypto4xx_alg_common crypto4xx_alg[] = {
/* Crypto AES modes */
- {
+ { .type = CRYPTO_ALG_TYPE_ABLKCIPHER, .u.cipher = {
.cra_name = "cbc(aes)",
.cra_driver_name = "cbc-aes-ppc4xx",
.cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct crypto4xx_ctx),
- .cra_alignmask = 0,
.cra_type = &crypto_ablkcipher_type,
+ .cra_init = crypto4xx_alg_init,
+ .cra_exit = crypto4xx_alg_exit,
.cra_module = THIS_MODULE,
.cra_u = {
.ablkcipher = {
@@ -1126,29 +1143,7 @@
.decrypt = crypto4xx_decrypt,
}
}
- },
- /* Hash SHA1 */
- {
- .cra_name = "sha1",
- .cra_driver_name = "sha1-ppc4xx",
- .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
- .cra_blocksize = SHA1_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct crypto4xx_ctx),
- .cra_alignmask = 0,
- .cra_type = &crypto_ahash_type,
- .cra_init = crypto4xx_sha1_alg_init,
- .cra_module = THIS_MODULE,
- .cra_u = {
- .ahash = {
- .digestsize = SHA1_DIGEST_SIZE,
- .init = crypto4xx_hash_init,
- .update = crypto4xx_hash_update,
- .final = crypto4xx_hash_final,
- .digest = crypto4xx_hash_digest,
- }
- }
- },
+ }},
};
/**
diff --git a/drivers/crypto/amcc/crypto4xx_core.h b/drivers/crypto/amcc/crypto4xx_core.h
index 1ef1034..da9cbe3 100644
--- a/drivers/crypto/amcc/crypto4xx_core.h
+++ b/drivers/crypto/amcc/crypto4xx_core.h
@@ -22,6 +22,8 @@
#ifndef __CRYPTO4XX_CORE_H__
#define __CRYPTO4XX_CORE_H__
+#include <crypto/internal/hash.h>
+
#define PPC460SX_SDR0_SRST 0x201
#define PPC405EX_SDR0_SRST 0x200
#define PPC460EX_SDR0_SRST 0x201
@@ -138,14 +140,31 @@
u16 sa_len;
};
+struct crypto4xx_alg_common {
+ u32 type;
+ union {
+ struct crypto_alg cipher;
+ struct ahash_alg hash;
+ } u;
+};
+
struct crypto4xx_alg {
struct list_head entry;
- struct crypto_alg alg;
+ struct crypto4xx_alg_common alg;
struct crypto4xx_device *dev;
};
-#define crypto_alg_to_crypto4xx_alg(x) \
- container_of(x, struct crypto4xx_alg, alg)
+static inline struct crypto4xx_alg *crypto_alg_to_crypto4xx_alg(
+ struct crypto_alg *x)
+{
+ switch (x->cra_flags & CRYPTO_ALG_TYPE_MASK) {
+ case CRYPTO_ALG_TYPE_AHASH:
+ return container_of(__crypto_ahash_alg(x),
+ struct crypto4xx_alg, alg.u.hash);
+ }
+
+ return container_of(x, struct crypto4xx_alg, alg.u.cipher);
+}
extern int crypto4xx_alloc_sa(struct crypto4xx_ctx *ctx, u32 size);
extern void crypto4xx_free_sa(struct crypto4xx_ctx *ctx);
diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c
new file mode 100644
index 0000000..b21ef63
--- /dev/null
+++ b/drivers/crypto/mv_cesa.c
@@ -0,0 +1,606 @@
+/*
+ * Support for Marvell's crypto engine which can be found on some Orion5X
+ * boards.
+ *
+ * Author: Sebastian Andrzej Siewior < sebastian at breakpoint dot cc >
+ * License: GPLv2
+ *
+ */
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kthread.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+
+#include "mv_cesa.h"
+/*
+ * STM:
+ * /---------------------------------------\
+ * | | request complete
+ * \./ |
+ * IDLE -> new request -> BUSY -> done -> DEQUEUE
+ * /°\ |
+ * | | more scatter entries
+ * \________________/
+ */
+enum engine_status {
+ ENGINE_IDLE,
+ ENGINE_BUSY,
+ ENGINE_W_DEQUEUE,
+};
+
+/**
+ * struct req_progress - used for every crypt request
+ * @src_sg_it: sg iterator for src
+ * @dst_sg_it: sg iterator for dst
+ * @sg_src_left: bytes left in src to process (scatter list)
+ * @src_start: offset to add to src start position (scatter list)
+ * @crypt_len: length of current crypt process
+ * @sg_dst_left: bytes left dst to process in this scatter list
+ * @dst_start: offset to add to dst start position (scatter list)
+ * @total_req_bytes: total number of bytes processed (request).
+ *
+ * sg helper are used to iterate over the scatterlist. Since the size of the
+ * SRAM may be less than the scatter size, this struct struct is used to keep
+ * track of progress within current scatterlist.
+ */
+struct req_progress {
+ struct sg_mapping_iter src_sg_it;
+ struct sg_mapping_iter dst_sg_it;
+
+ /* src mostly */
+ int sg_src_left;
+ int src_start;
+ int crypt_len;
+ /* dst mostly */
+ int sg_dst_left;
+ int dst_start;
+ int total_req_bytes;
+};
+
+struct crypto_priv {
+ void __iomem *reg;
+ void __iomem *sram;
+ int irq;
+ struct task_struct *queue_th;
+
+ /* the lock protects queue and eng_st */
+ spinlock_t lock;
+ struct crypto_queue queue;
+ enum engine_status eng_st;
+ struct ablkcipher_request *cur_req;
+ struct req_progress p;
+ int max_req_size;
+ int sram_size;
+};
+
+static struct crypto_priv *cpg;
+
+struct mv_ctx {
+ u8 aes_enc_key[AES_KEY_LEN];
+ u32 aes_dec_key[8];
+ int key_len;
+ u32 need_calc_aes_dkey;
+};
+
+enum crypto_op {
+ COP_AES_ECB,
+ COP_AES_CBC,
+};
+
+struct mv_req_ctx {
+ enum crypto_op op;
+ int decrypt;
+};
+
+static void compute_aes_dec_key(struct mv_ctx *ctx)
+{
+ struct crypto_aes_ctx gen_aes_key;
+ int key_pos;
+
+ if (!ctx->need_calc_aes_dkey)
+ return;
+
+ crypto_aes_expand_key(&gen_aes_key, ctx->aes_enc_key, ctx->key_len);
+
+ key_pos = ctx->key_len + 24;
+ memcpy(ctx->aes_dec_key, &gen_aes_key.key_enc[key_pos], 4 * 4);
+ switch (ctx->key_len) {
+ case AES_KEYSIZE_256:
+ key_pos -= 2;
+ /* fall */
+ case AES_KEYSIZE_192:
+ key_pos -= 2;
+ memcpy(&ctx->aes_dec_key[4], &gen_aes_key.key_enc[key_pos],
+ 4 * 4);
+ break;
+ }
+ ctx->need_calc_aes_dkey = 0;
+}
+
+static int mv_setkey_aes(struct crypto_ablkcipher *cipher, const u8 *key,
+ unsigned int len)
+{
+ struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
+ struct mv_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ switch (len) {
+ case AES_KEYSIZE_128:
+ case AES_KEYSIZE_192:
+ case AES_KEYSIZE_256:
+ break;
+ default:
+ crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ ctx->key_len = len;
+ ctx->need_calc_aes_dkey = 1;
+
+ memcpy(ctx->aes_enc_key, key, AES_KEY_LEN);
+ return 0;
+}
+
+static void setup_data_in(struct ablkcipher_request *req)
+{
+ int ret;
+ void *buf;
+
+ if (!cpg->p.sg_src_left) {
+ ret = sg_miter_next(&cpg->p.src_sg_it);
+ BUG_ON(!ret);
+ cpg->p.sg_src_left = cpg->p.src_sg_it.length;
+ cpg->p.src_start = 0;
+ }
+
+ cpg->p.crypt_len = min(cpg->p.sg_src_left, cpg->max_req_size);
+
+ buf = cpg->p.src_sg_it.addr;
+ buf += cpg->p.src_start;
+
+ memcpy(cpg->sram + SRAM_DATA_IN_START, buf, cpg->p.crypt_len);
+
+ cpg->p.sg_src_left -= cpg->p.crypt_len;
+ cpg->p.src_start += cpg->p.crypt_len;
+}
+
+static void mv_process_current_q(int first_block)
+{
+ struct ablkcipher_request *req = cpg->cur_req;
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+ struct sec_accel_config op;
+
+ switch (req_ctx->op) {
+ case COP_AES_ECB:
+ op.config = CFG_OP_CRYPT_ONLY | CFG_ENCM_AES | CFG_ENC_MODE_ECB;
+ break;
+ case COP_AES_CBC:
+ op.config = CFG_OP_CRYPT_ONLY | CFG_ENCM_AES | CFG_ENC_MODE_CBC;
+ op.enc_iv = ENC_IV_POINT(SRAM_DATA_IV) |
+ ENC_IV_BUF_POINT(SRAM_DATA_IV_BUF);
+ if (first_block)
+ memcpy(cpg->sram + SRAM_DATA_IV, req->info, 16);
+ break;
+ }
+ if (req_ctx->decrypt) {
+ op.config |= CFG_DIR_DEC;
+ memcpy(cpg->sram + SRAM_DATA_KEY_P, ctx->aes_dec_key,
+ AES_KEY_LEN);
+ } else {
+ op.config |= CFG_DIR_ENC;
+ memcpy(cpg->sram + SRAM_DATA_KEY_P, ctx->aes_enc_key,
+ AES_KEY_LEN);
+ }
+
+ switch (ctx->key_len) {
+ case AES_KEYSIZE_128:
+ op.config |= CFG_AES_LEN_128;
+ break;
+ case AES_KEYSIZE_192:
+ op.config |= CFG_AES_LEN_192;
+ break;
+ case AES_KEYSIZE_256:
+ op.config |= CFG_AES_LEN_256;
+ break;
+ }
+ op.enc_p = ENC_P_SRC(SRAM_DATA_IN_START) |
+ ENC_P_DST(SRAM_DATA_OUT_START);
+ op.enc_key_p = SRAM_DATA_KEY_P;
+
+ setup_data_in(req);
+ op.enc_len = cpg->p.crypt_len;
+ memcpy(cpg->sram + SRAM_CONFIG, &op,
+ sizeof(struct sec_accel_config));
+
+ writel(SRAM_CONFIG, cpg->reg + SEC_ACCEL_DESC_P0);
+ /* GO */
+ writel(SEC_CMD_EN_SEC_ACCL0, cpg->reg + SEC_ACCEL_CMD);
+
+ /*
+ * XXX: add timer if the interrupt does not occur for some mystery
+ * reason
+ */
+}
+
+static void mv_crypto_algo_completion(void)
+{
+ struct ablkcipher_request *req = cpg->cur_req;
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ if (req_ctx->op != COP_AES_CBC)
+ return ;
+
+ memcpy(req->info, cpg->sram + SRAM_DATA_IV_BUF, 16);
+}
+
+static void dequeue_complete_req(void)
+{
+ struct ablkcipher_request *req = cpg->cur_req;
+ void *buf;
+ int ret;
+
+ cpg->p.total_req_bytes += cpg->p.crypt_len;
+ do {
+ int dst_copy;
+
+ if (!cpg->p.sg_dst_left) {
+ ret = sg_miter_next(&cpg->p.dst_sg_it);
+ BUG_ON(!ret);
+ cpg->p.sg_dst_left = cpg->p.dst_sg_it.length;
+ cpg->p.dst_start = 0;
+ }
+
+ buf = cpg->p.dst_sg_it.addr;
+ buf += cpg->p.dst_start;
+
+ dst_copy = min(cpg->p.crypt_len, cpg->p.sg_dst_left);
+
+ memcpy(buf, cpg->sram + SRAM_DATA_OUT_START, dst_copy);
+
+ cpg->p.sg_dst_left -= dst_copy;
+ cpg->p.crypt_len -= dst_copy;
+ cpg->p.dst_start += dst_copy;
+ } while (cpg->p.crypt_len > 0);
+
+ BUG_ON(cpg->eng_st != ENGINE_W_DEQUEUE);
+ if (cpg->p.total_req_bytes < req->nbytes) {
+ /* process next scatter list entry */
+ cpg->eng_st = ENGINE_BUSY;
+ mv_process_current_q(0);
+ } else {
+ sg_miter_stop(&cpg->p.src_sg_it);
+ sg_miter_stop(&cpg->p.dst_sg_it);
+ mv_crypto_algo_completion();
+ cpg->eng_st = ENGINE_IDLE;
+ req->base.complete(&req->base, 0);
+ }
+}
+
+static int count_sgs(struct scatterlist *sl, unsigned int total_bytes)
+{
+ int i = 0;
+
+ do {
+ total_bytes -= sl[i].length;
+ i++;
+
+ } while (total_bytes > 0);
+
+ return i;
+}
+
+static void mv_enqueue_new_req(struct ablkcipher_request *req)
+{
+ int num_sgs;
+
+ cpg->cur_req = req;
+ memset(&cpg->p, 0, sizeof(struct req_progress));
+
+ num_sgs = count_sgs(req->src, req->nbytes);
+ sg_miter_start(&cpg->p.src_sg_it, req->src, num_sgs, SG_MITER_FROM_SG);
+
+ num_sgs = count_sgs(req->dst, req->nbytes);
+ sg_miter_start(&cpg->p.dst_sg_it, req->dst, num_sgs, SG_MITER_TO_SG);
+ mv_process_current_q(1);
+}
+
+static int queue_manag(void *data)
+{
+ cpg->eng_st = ENGINE_IDLE;
+ do {
+ struct ablkcipher_request *req;
+ struct crypto_async_request *async_req = NULL;
+ struct crypto_async_request *backlog;
+
+ __set_current_state(TASK_INTERRUPTIBLE);
+
+ if (cpg->eng_st == ENGINE_W_DEQUEUE)
+ dequeue_complete_req();
+
+ spin_lock_irq(&cpg->lock);
+ if (cpg->eng_st == ENGINE_IDLE) {
+ backlog = crypto_get_backlog(&cpg->queue);
+ async_req = crypto_dequeue_request(&cpg->queue);
+ if (async_req) {
+ BUG_ON(cpg->eng_st != ENGINE_IDLE);
+ cpg->eng_st = ENGINE_BUSY;
+ }
+ }
+ spin_unlock_irq(&cpg->lock);
+
+ if (backlog) {
+ backlog->complete(backlog, -EINPROGRESS);
+ backlog = NULL;
+ }
+
+ if (async_req) {
+ req = container_of(async_req,
+ struct ablkcipher_request, base);
+ mv_enqueue_new_req(req);
+ async_req = NULL;
+ }
+
+ schedule();
+
+ } while (!kthread_should_stop());
+ return 0;
+}
+
+static int mv_handle_req(struct ablkcipher_request *req)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&cpg->lock, flags);
+ ret = ablkcipher_enqueue_request(&cpg->queue, req);
+ spin_unlock_irqrestore(&cpg->lock, flags);
+ wake_up_process(cpg->queue_th);
+ return ret;
+}
+
+static int mv_enc_aes_ecb(struct ablkcipher_request *req)
+{
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_ECB;
+ req_ctx->decrypt = 0;
+
+ return mv_handle_req(req);
+}
+
+static int mv_dec_aes_ecb(struct ablkcipher_request *req)
+{
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_ECB;
+ req_ctx->decrypt = 1;
+
+ compute_aes_dec_key(ctx);
+ return mv_handle_req(req);
+}
+
+static int mv_enc_aes_cbc(struct ablkcipher_request *req)
+{
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_CBC;
+ req_ctx->decrypt = 0;
+
+ return mv_handle_req(req);
+}
+
+static int mv_dec_aes_cbc(struct ablkcipher_request *req)
+{
+ struct mv_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
+ struct mv_req_ctx *req_ctx = ablkcipher_request_ctx(req);
+
+ req_ctx->op = COP_AES_CBC;
+ req_ctx->decrypt = 1;
+
+ compute_aes_dec_key(ctx);
+ return mv_handle_req(req);
+}
+
+static int mv_cra_init(struct crypto_tfm *tfm)
+{
+ tfm->crt_ablkcipher.reqsize = sizeof(struct mv_req_ctx);
+ return 0;
+}
+
+irqreturn_t crypto_int(int irq, void *priv)
+{
+ u32 val;
+
+ val = readl(cpg->reg + SEC_ACCEL_INT_STATUS);
+ if (!(val & SEC_INT_ACCEL0_DONE))
+ return IRQ_NONE;
+
+ val &= ~SEC_INT_ACCEL0_DONE;
+ writel(val, cpg->reg + FPGA_INT_STATUS);
+ writel(val, cpg->reg + SEC_ACCEL_INT_STATUS);
+ BUG_ON(cpg->eng_st != ENGINE_BUSY);
+ cpg->eng_st = ENGINE_W_DEQUEUE;
+ wake_up_process(cpg->queue_th);
+ return IRQ_HANDLED;
+}
+
+struct crypto_alg mv_aes_alg_ecb = {
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "mv-ecb-aes",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = 16,
+ .cra_ctxsize = sizeof(struct mv_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = mv_setkey_aes,
+ .encrypt = mv_enc_aes_ecb,
+ .decrypt = mv_dec_aes_ecb,
+ },
+ },
+};
+
+struct crypto_alg mv_aes_alg_cbc = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "mv-cbc-aes",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct mv_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = mv_cra_init,
+ .cra_u = {
+ .ablkcipher = {
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = mv_setkey_aes,
+ .encrypt = mv_enc_aes_cbc,
+ .decrypt = mv_dec_aes_cbc,
+ },
+ },
+};
+
+static int mv_probe(struct platform_device *pdev)
+{
+ struct crypto_priv *cp;
+ struct resource *res;
+ int irq;
+ int ret;
+
+ if (cpg) {
+ printk(KERN_ERR "Second crypto dev?\n");
+ return -EEXIST;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ if (!res)
+ return -ENXIO;
+
+ cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+ if (!cp)
+ return -ENOMEM;
+
+ spin_lock_init(&cp->lock);
+ crypto_init_queue(&cp->queue, 50);
+ cp->reg = ioremap(res->start, res->end - res->start + 1);
+ if (!cp->reg) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
+ if (!res) {
+ ret = -ENXIO;
+ goto err_unmap_reg;
+ }
+ cp->sram_size = res->end - res->start + 1;
+ cp->max_req_size = cp->sram_size - SRAM_CFG_SPACE;
+ cp->sram = ioremap(res->start, cp->sram_size);
+ if (!cp->sram) {
+ ret = -ENOMEM;
+ goto err_unmap_reg;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0 || irq == NO_IRQ) {
+ ret = irq;
+ goto err_unmap_sram;
+ }
+ cp->irq = irq;
+
+ platform_set_drvdata(pdev, cp);
+ cpg = cp;
+
+ cp->queue_th = kthread_run(queue_manag, cp, "mv_crypto");
+ if (IS_ERR(cp->queue_th)) {
+ ret = PTR_ERR(cp->queue_th);
+ goto err_thread;
+ }
+
+ ret = request_irq(irq, crypto_int, IRQF_DISABLED, dev_name(&pdev->dev),
+ cp);
+ if (ret)
+ goto err_unmap_sram;
+
+ writel(SEC_INT_ACCEL0_DONE, cpg->reg + SEC_ACCEL_INT_MASK);
+ writel(SEC_CFG_STOP_DIG_ERR, cpg->reg + SEC_ACCEL_CFG);
+
+ ret = crypto_register_alg(&mv_aes_alg_ecb);
+ if (ret)
+ goto err_reg;
+
+ ret = crypto_register_alg(&mv_aes_alg_cbc);
+ if (ret)
+ goto err_unreg_ecb;
+ return 0;
+err_unreg_ecb:
+ crypto_unregister_alg(&mv_aes_alg_ecb);
+err_thread:
+ free_irq(irq, cp);
+err_reg:
+ kthread_stop(cp->queue_th);
+err_unmap_sram:
+ iounmap(cp->sram);
+err_unmap_reg:
+ iounmap(cp->reg);
+err:
+ kfree(cp);
+ cpg = NULL;
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+}
+
+static int mv_remove(struct platform_device *pdev)
+{
+ struct crypto_priv *cp = platform_get_drvdata(pdev);
+
+ crypto_unregister_alg(&mv_aes_alg_ecb);
+ crypto_unregister_alg(&mv_aes_alg_cbc);
+ kthread_stop(cp->queue_th);
+ free_irq(cp->irq, cp);
+ memset(cp->sram, 0, cp->sram_size);
+ iounmap(cp->sram);
+ iounmap(cp->reg);
+ kfree(cp);
+ cpg = NULL;
+ return 0;
+}
+
+static struct platform_driver marvell_crypto = {
+ .probe = mv_probe,
+ .remove = mv_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mv_crypto",
+ },
+};
+MODULE_ALIAS("platform:mv_crypto");
+
+static int __init mv_crypto_init(void)
+{
+ return platform_driver_register(&marvell_crypto);
+}
+module_init(mv_crypto_init);
+
+static void __exit mv_crypto_exit(void)
+{
+ platform_driver_unregister(&marvell_crypto);
+}
+module_exit(mv_crypto_exit);
+
+MODULE_AUTHOR("Sebastian Andrzej Siewior <sebastian@breakpoint.cc>");
+MODULE_DESCRIPTION("Support for Marvell's cryptographic engine");
+MODULE_LICENSE("GPL");
diff --git a/drivers/crypto/mv_cesa.h b/drivers/crypto/mv_cesa.h
new file mode 100644
index 0000000..c3e25d3
--- /dev/null
+++ b/drivers/crypto/mv_cesa.h
@@ -0,0 +1,119 @@
+#ifndef __MV_CRYPTO_H__
+
+#define DIGEST_INITIAL_VAL_A 0xdd00
+#define DES_CMD_REG 0xdd58
+
+#define SEC_ACCEL_CMD 0xde00
+#define SEC_CMD_EN_SEC_ACCL0 (1 << 0)
+#define SEC_CMD_EN_SEC_ACCL1 (1 << 1)
+#define SEC_CMD_DISABLE_SEC (1 << 2)
+
+#define SEC_ACCEL_DESC_P0 0xde04
+#define SEC_DESC_P0_PTR(x) (x)
+
+#define SEC_ACCEL_DESC_P1 0xde14
+#define SEC_DESC_P1_PTR(x) (x)
+
+#define SEC_ACCEL_CFG 0xde08
+#define SEC_CFG_STOP_DIG_ERR (1 << 0)
+#define SEC_CFG_CH0_W_IDMA (1 << 7)
+#define SEC_CFG_CH1_W_IDMA (1 << 8)
+#define SEC_CFG_ACT_CH0_IDMA (1 << 9)
+#define SEC_CFG_ACT_CH1_IDMA (1 << 10)
+
+#define SEC_ACCEL_STATUS 0xde0c
+#define SEC_ST_ACT_0 (1 << 0)
+#define SEC_ST_ACT_1 (1 << 1)
+
+/*
+ * FPGA_INT_STATUS looks like a FPGA leftover and is documented only in Errata
+ * 4.12. It looks like that it was part of an IRQ-controller in FPGA and
+ * someone forgot to remove it while switching to the core and moving to
+ * SEC_ACCEL_INT_STATUS.
+ */
+#define FPGA_INT_STATUS 0xdd68
+#define SEC_ACCEL_INT_STATUS 0xde20
+#define SEC_INT_AUTH_DONE (1 << 0)
+#define SEC_INT_DES_E_DONE (1 << 1)
+#define SEC_INT_AES_E_DONE (1 << 2)
+#define SEC_INT_AES_D_DONE (1 << 3)
+#define SEC_INT_ENC_DONE (1 << 4)
+#define SEC_INT_ACCEL0_DONE (1 << 5)
+#define SEC_INT_ACCEL1_DONE (1 << 6)
+#define SEC_INT_ACC0_IDMA_DONE (1 << 7)
+#define SEC_INT_ACC1_IDMA_DONE (1 << 8)
+
+#define SEC_ACCEL_INT_MASK 0xde24
+
+#define AES_KEY_LEN (8 * 4)
+
+struct sec_accel_config {
+
+ u32 config;
+#define CFG_OP_MAC_ONLY 0
+#define CFG_OP_CRYPT_ONLY 1
+#define CFG_OP_MAC_CRYPT 2
+#define CFG_OP_CRYPT_MAC 3
+#define CFG_MACM_MD5 (4 << 4)
+#define CFG_MACM_SHA1 (5 << 4)
+#define CFG_MACM_HMAC_MD5 (6 << 4)
+#define CFG_MACM_HMAC_SHA1 (7 << 4)
+#define CFG_ENCM_DES (1 << 8)
+#define CFG_ENCM_3DES (2 << 8)
+#define CFG_ENCM_AES (3 << 8)
+#define CFG_DIR_ENC (0 << 12)
+#define CFG_DIR_DEC (1 << 12)
+#define CFG_ENC_MODE_ECB (0 << 16)
+#define CFG_ENC_MODE_CBC (1 << 16)
+#define CFG_3DES_EEE (0 << 20)
+#define CFG_3DES_EDE (1 << 20)
+#define CFG_AES_LEN_128 (0 << 24)
+#define CFG_AES_LEN_192 (1 << 24)
+#define CFG_AES_LEN_256 (2 << 24)
+
+ u32 enc_p;
+#define ENC_P_SRC(x) (x)
+#define ENC_P_DST(x) ((x) << 16)
+
+ u32 enc_len;
+#define ENC_LEN(x) (x)
+
+ u32 enc_key_p;
+#define ENC_KEY_P(x) (x)
+
+ u32 enc_iv;
+#define ENC_IV_POINT(x) ((x) << 0)
+#define ENC_IV_BUF_POINT(x) ((x) << 16)
+
+ u32 mac_src_p;
+#define MAC_SRC_DATA_P(x) (x)
+#define MAC_SRC_TOTAL_LEN(x) ((x) << 16)
+
+ u32 mac_digest;
+ u32 mac_iv;
+}__attribute__ ((packed));
+ /*
+ * /-----------\ 0
+ * | ACCEL CFG | 4 * 8
+ * |-----------| 0x20
+ * | CRYPT KEY | 8 * 4
+ * |-----------| 0x40
+ * | IV IN | 4 * 4
+ * |-----------| 0x40 (inplace)
+ * | IV BUF | 4 * 4
+ * |-----------| 0x50
+ * | DATA IN | 16 * x (max ->max_req_size)
+ * |-----------| 0x50 (inplace operation)
+ * | DATA OUT | 16 * x (max ->max_req_size)
+ * \-----------/ SRAM size
+ */
+#define SRAM_CONFIG 0x00
+#define SRAM_DATA_KEY_P 0x20
+#define SRAM_DATA_IV 0x40
+#define SRAM_DATA_IV_BUF 0x40
+#define SRAM_DATA_IN_START 0x50
+#define SRAM_DATA_OUT_START 0x50
+
+#define SRAM_CFG_SPACE 0x50
+
+#endif
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index a2c8e85..76cb6b3 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -12,81 +12,43 @@
*
*/
-#include <crypto/algapi.h>
+#include <crypto/internal/hash.h>
#include <crypto/sha.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/cryptohash.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
#include <asm/i387.h>
#include "padlock.h"
-#define SHA1_DEFAULT_FALLBACK "sha1-generic"
-#define SHA256_DEFAULT_FALLBACK "sha256-generic"
-
-struct padlock_sha_ctx {
- char *data;
- size_t used;
- int bypass;
- void (*f_sha_padlock)(const char *in, char *out, int count);
- struct hash_desc fallback;
+struct padlock_sha_desc {
+ struct shash_desc fallback;
};
-static inline struct padlock_sha_ctx *ctx(struct crypto_tfm *tfm)
+struct padlock_sha_ctx {
+ struct crypto_shash *fallback;
+};
+
+static int padlock_sha_init(struct shash_desc *desc)
{
- return crypto_tfm_ctx(tfm);
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct padlock_sha_ctx *ctx = crypto_shash_ctx(desc->tfm);
+
+ dctx->fallback.tfm = ctx->fallback;
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ return crypto_shash_init(&dctx->fallback);
}
-/* We'll need aligned address on the stack */
-#define NEAREST_ALIGNED(ptr) \
- ((void *)ALIGN((size_t)(ptr), PADLOCK_ALIGNMENT))
-
-static struct crypto_alg sha1_alg, sha256_alg;
-
-static void padlock_sha_bypass(struct crypto_tfm *tfm)
+static int padlock_sha_update(struct shash_desc *desc,
+ const u8 *data, unsigned int length)
{
- if (ctx(tfm)->bypass)
- return;
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
- crypto_hash_init(&ctx(tfm)->fallback);
- if (ctx(tfm)->data && ctx(tfm)->used) {
- struct scatterlist sg;
-
- sg_init_one(&sg, ctx(tfm)->data, ctx(tfm)->used);
- crypto_hash_update(&ctx(tfm)->fallback, &sg, sg.length);
- }
-
- ctx(tfm)->used = 0;
- ctx(tfm)->bypass = 1;
-}
-
-static void padlock_sha_init(struct crypto_tfm *tfm)
-{
- ctx(tfm)->used = 0;
- ctx(tfm)->bypass = 0;
-}
-
-static void padlock_sha_update(struct crypto_tfm *tfm,
- const uint8_t *data, unsigned int length)
-{
- /* Our buffer is always one page. */
- if (unlikely(!ctx(tfm)->bypass &&
- (ctx(tfm)->used + length > PAGE_SIZE)))
- padlock_sha_bypass(tfm);
-
- if (unlikely(ctx(tfm)->bypass)) {
- struct scatterlist sg;
- sg_init_one(&sg, (uint8_t *)data, length);
- crypto_hash_update(&ctx(tfm)->fallback, &sg, length);
- return;
- }
-
- memcpy(ctx(tfm)->data + ctx(tfm)->used, data, length);
- ctx(tfm)->used += length;
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ return crypto_shash_update(&dctx->fallback, data, length);
}
static inline void padlock_output_block(uint32_t *src,
@@ -96,165 +58,206 @@
*dst++ = swab32(*src++);
}
-static void padlock_do_sha1(const char *in, char *out, int count)
+static int padlock_sha1_finup(struct shash_desc *desc, const u8 *in,
+ unsigned int count, u8 *out)
{
/* We can't store directly to *out as it may be unaligned. */
/* BTW Don't reduce the buffer size below 128 Bytes!
* PadLock microcode needs it that big. */
- char buf[128+16];
- char *result = NEAREST_ALIGNED(buf);
+ char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct sha1_state state;
+ unsigned int space;
+ unsigned int leftover;
int ts_state;
+ int err;
- ((uint32_t *)result)[0] = SHA1_H0;
- ((uint32_t *)result)[1] = SHA1_H1;
- ((uint32_t *)result)[2] = SHA1_H2;
- ((uint32_t *)result)[3] = SHA1_H3;
- ((uint32_t *)result)[4] = SHA1_H4;
-
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+
+ if (state.count + count > ULONG_MAX)
+ return crypto_shash_finup(&dctx->fallback, in, count, out);
+
+ leftover = ((state.count - 1) & (SHA1_BLOCK_SIZE - 1)) + 1;
+ space = SHA1_BLOCK_SIZE - leftover;
+ if (space) {
+ if (count > space) {
+ err = crypto_shash_update(&dctx->fallback, in, space) ?:
+ crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+ count -= space;
+ in += space;
+ } else {
+ memcpy(state.buffer + leftover, in, count);
+ in = state.buffer;
+ count += leftover;
+ state.count &= ~(SHA1_BLOCK_SIZE - 1);
+ }
+ }
+
+ memcpy(result, &state.state, SHA1_DIGEST_SIZE);
+
/* prevent taking the spurious DNA fault with padlock. */
ts_state = irq_ts_save();
asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
- : "+S"(in), "+D"(result)
- : "c"(count), "a"(0));
+ : \
+ : "c"((unsigned long)state.count + count), \
+ "a"((unsigned long)state.count), \
+ "S"(in), "D"(result));
irq_ts_restore(ts_state);
padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
+
+out:
+ return err;
}
-static void padlock_do_sha256(const char *in, char *out, int count)
+static int padlock_sha1_final(struct shash_desc *desc, u8 *out)
+{
+ u8 buf[4];
+
+ return padlock_sha1_finup(desc, buf, 0, out);
+}
+
+static int padlock_sha256_finup(struct shash_desc *desc, const u8 *in,
+ unsigned int count, u8 *out)
{
/* We can't store directly to *out as it may be unaligned. */
/* BTW Don't reduce the buffer size below 128 Bytes!
* PadLock microcode needs it that big. */
- char buf[128+16];
- char *result = NEAREST_ALIGNED(buf);
+ char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+ struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+ struct sha256_state state;
+ unsigned int space;
+ unsigned int leftover;
int ts_state;
+ int err;
- ((uint32_t *)result)[0] = SHA256_H0;
- ((uint32_t *)result)[1] = SHA256_H1;
- ((uint32_t *)result)[2] = SHA256_H2;
- ((uint32_t *)result)[3] = SHA256_H3;
- ((uint32_t *)result)[4] = SHA256_H4;
- ((uint32_t *)result)[5] = SHA256_H5;
- ((uint32_t *)result)[6] = SHA256_H6;
- ((uint32_t *)result)[7] = SHA256_H7;
+ dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ err = crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+
+ if (state.count + count > ULONG_MAX)
+ return crypto_shash_finup(&dctx->fallback, in, count, out);
+
+ leftover = ((state.count - 1) & (SHA256_BLOCK_SIZE - 1)) + 1;
+ space = SHA256_BLOCK_SIZE - leftover;
+ if (space) {
+ if (count > space) {
+ err = crypto_shash_update(&dctx->fallback, in, space) ?:
+ crypto_shash_export(&dctx->fallback, &state);
+ if (err)
+ goto out;
+ count -= space;
+ in += space;
+ } else {
+ memcpy(state.buf + leftover, in, count);
+ in = state.buf;
+ count += leftover;
+ state.count &= ~(SHA1_BLOCK_SIZE - 1);
+ }
+ }
+
+ memcpy(result, &state.state, SHA256_DIGEST_SIZE);
/* prevent taking the spurious DNA fault with padlock. */
ts_state = irq_ts_save();
asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
- : "+S"(in), "+D"(result)
- : "c"(count), "a"(0));
+ : \
+ : "c"((unsigned long)state.count + count), \
+ "a"((unsigned long)state.count), \
+ "S"(in), "D"(result));
irq_ts_restore(ts_state);
padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
+
+out:
+ return err;
}
-static void padlock_sha_final(struct crypto_tfm *tfm, uint8_t *out)
+static int padlock_sha256_final(struct shash_desc *desc, u8 *out)
{
- if (unlikely(ctx(tfm)->bypass)) {
- crypto_hash_final(&ctx(tfm)->fallback, out);
- ctx(tfm)->bypass = 0;
- return;
- }
+ u8 buf[4];
- /* Pass the input buffer to PadLock microcode... */
- ctx(tfm)->f_sha_padlock(ctx(tfm)->data, out, ctx(tfm)->used);
-
- ctx(tfm)->used = 0;
+ return padlock_sha256_finup(desc, buf, 0, out);
}
static int padlock_cra_init(struct crypto_tfm *tfm)
{
+ struct crypto_shash *hash = __crypto_shash_cast(tfm);
const char *fallback_driver_name = tfm->__crt_alg->cra_name;
- struct crypto_hash *fallback_tfm;
-
- /* For now we'll allocate one page. This
- * could eventually be configurable one day. */
- ctx(tfm)->data = (char *)__get_free_page(GFP_KERNEL);
- if (!ctx(tfm)->data)
- return -ENOMEM;
+ struct padlock_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct crypto_shash *fallback_tfm;
+ int err = -ENOMEM;
/* Allocate a fallback and abort if it failed. */
- fallback_tfm = crypto_alloc_hash(fallback_driver_name, 0,
- CRYPTO_ALG_ASYNC |
- CRYPTO_ALG_NEED_FALLBACK);
+ fallback_tfm = crypto_alloc_shash(fallback_driver_name, 0,
+ CRYPTO_ALG_NEED_FALLBACK);
if (IS_ERR(fallback_tfm)) {
printk(KERN_WARNING PFX "Fallback driver '%s' could not be loaded!\n",
fallback_driver_name);
- free_page((unsigned long)(ctx(tfm)->data));
- return PTR_ERR(fallback_tfm);
+ err = PTR_ERR(fallback_tfm);
+ goto out;
}
- ctx(tfm)->fallback.tfm = fallback_tfm;
+ ctx->fallback = fallback_tfm;
+ hash->descsize += crypto_shash_descsize(fallback_tfm);
return 0;
-}
-static int padlock_sha1_cra_init(struct crypto_tfm *tfm)
-{
- ctx(tfm)->f_sha_padlock = padlock_do_sha1;
-
- return padlock_cra_init(tfm);
-}
-
-static int padlock_sha256_cra_init(struct crypto_tfm *tfm)
-{
- ctx(tfm)->f_sha_padlock = padlock_do_sha256;
-
- return padlock_cra_init(tfm);
+out:
+ return err;
}
static void padlock_cra_exit(struct crypto_tfm *tfm)
{
- if (ctx(tfm)->data) {
- free_page((unsigned long)(ctx(tfm)->data));
- ctx(tfm)->data = NULL;
- }
+ struct padlock_sha_ctx *ctx = crypto_tfm_ctx(tfm);
- crypto_free_hash(ctx(tfm)->fallback.tfm);
- ctx(tfm)->fallback.tfm = NULL;
+ crypto_free_shash(ctx->fallback);
}
-static struct crypto_alg sha1_alg = {
- .cra_name = "sha1",
- .cra_driver_name = "sha1-padlock",
- .cra_priority = PADLOCK_CRA_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_DIGEST |
- CRYPTO_ALG_NEED_FALLBACK,
- .cra_blocksize = SHA1_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct padlock_sha_ctx),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(sha1_alg.cra_list),
- .cra_init = padlock_sha1_cra_init,
- .cra_exit = padlock_cra_exit,
- .cra_u = {
- .digest = {
- .dia_digestsize = SHA1_DIGEST_SIZE,
- .dia_init = padlock_sha_init,
- .dia_update = padlock_sha_update,
- .dia_final = padlock_sha_final,
- }
+static struct shash_alg sha1_alg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .init = padlock_sha_init,
+ .update = padlock_sha_update,
+ .finup = padlock_sha1_finup,
+ .final = padlock_sha1_final,
+ .descsize = sizeof(struct padlock_sha_desc),
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "sha1-padlock",
+ .cra_priority = PADLOCK_CRA_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct padlock_sha_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = padlock_cra_init,
+ .cra_exit = padlock_cra_exit,
}
};
-static struct crypto_alg sha256_alg = {
- .cra_name = "sha256",
- .cra_driver_name = "sha256-padlock",
- .cra_priority = PADLOCK_CRA_PRIORITY,
- .cra_flags = CRYPTO_ALG_TYPE_DIGEST |
- CRYPTO_ALG_NEED_FALLBACK,
- .cra_blocksize = SHA256_BLOCK_SIZE,
- .cra_ctxsize = sizeof(struct padlock_sha_ctx),
- .cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(sha256_alg.cra_list),
- .cra_init = padlock_sha256_cra_init,
- .cra_exit = padlock_cra_exit,
- .cra_u = {
- .digest = {
- .dia_digestsize = SHA256_DIGEST_SIZE,
- .dia_init = padlock_sha_init,
- .dia_update = padlock_sha_update,
- .dia_final = padlock_sha_final,
- }
+static struct shash_alg sha256_alg = {
+ .digestsize = SHA256_DIGEST_SIZE,
+ .init = padlock_sha_init,
+ .update = padlock_sha_update,
+ .finup = padlock_sha256_finup,
+ .final = padlock_sha256_final,
+ .descsize = sizeof(struct padlock_sha_desc),
+ .base = {
+ .cra_name = "sha256",
+ .cra_driver_name = "sha256-padlock",
+ .cra_priority = PADLOCK_CRA_PRIORITY,
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = SHA256_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct padlock_sha_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = padlock_cra_init,
+ .cra_exit = padlock_cra_exit,
}
};
@@ -272,11 +275,11 @@
return -ENODEV;
}
- rc = crypto_register_alg(&sha1_alg);
+ rc = crypto_register_shash(&sha1_alg);
if (rc)
goto out;
- rc = crypto_register_alg(&sha256_alg);
+ rc = crypto_register_shash(&sha256_alg);
if (rc)
goto out_unreg1;
@@ -285,7 +288,7 @@
return 0;
out_unreg1:
- crypto_unregister_alg(&sha1_alg);
+ crypto_unregister_shash(&sha1_alg);
out:
printk(KERN_ERR PFX "VIA PadLock SHA1/SHA256 initialization failed.\n");
return rc;
@@ -293,8 +296,8 @@
static void __exit padlock_fini(void)
{
- crypto_unregister_alg(&sha1_alg);
- crypto_unregister_alg(&sha256_alg);
+ crypto_unregister_shash(&sha1_alg);
+ crypto_unregister_shash(&sha256_alg);
}
module_init(padlock_init);
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index c70775f..c47ffe8 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -86,6 +86,25 @@
void *context;
};
+/* per-channel fifo management */
+struct talitos_channel {
+ /* request fifo */
+ struct talitos_request *fifo;
+
+ /* number of requests pending in channel h/w fifo */
+ atomic_t submit_count ____cacheline_aligned;
+
+ /* request submission (head) lock */
+ spinlock_t head_lock ____cacheline_aligned;
+ /* index to next free descriptor request */
+ int head;
+
+ /* request release (tail) lock */
+ spinlock_t tail_lock ____cacheline_aligned;
+ /* index to next in-progress/done descriptor request */
+ int tail;
+};
+
struct talitos_private {
struct device *dev;
struct of_device *ofdev;
@@ -101,15 +120,6 @@
/* SEC Compatibility info */
unsigned long features;
- /* next channel to be assigned next incoming descriptor */
- atomic_t last_chan;
-
- /* per-channel number of requests pending in channel h/w fifo */
- atomic_t *submit_count;
-
- /* per-channel request fifo */
- struct talitos_request **fifo;
-
/*
* length of the request fifo
* fifo_len is chfifo_len rounded up to next power of 2
@@ -117,15 +127,10 @@
*/
unsigned int fifo_len;
- /* per-channel index to next free descriptor request */
- int *head;
+ struct talitos_channel *chan;
- /* per-channel index to next in-progress/done descriptor request */
- int *tail;
-
- /* per-channel request submission (head) and release (tail) locks */
- spinlock_t *head_lock;
- spinlock_t *tail_lock;
+ /* next channel to be assigned next incoming descriptor */
+ atomic_t last_chan ____cacheline_aligned;
/* request callback tasklet */
struct tasklet_struct done_task;
@@ -141,6 +146,12 @@
#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
#define TALITOS_FTR_HW_AUTH_CHECK 0x00000002
+static void to_talitos_ptr(struct talitos_ptr *talitos_ptr, dma_addr_t dma_addr)
+{
+ talitos_ptr->ptr = cpu_to_be32(lower_32_bits(dma_addr));
+ talitos_ptr->eptr = cpu_to_be32(upper_32_bits(dma_addr));
+}
+
/*
* map virtual single (contiguous) pointer to h/w descriptor pointer
*/
@@ -150,8 +161,10 @@
unsigned char extent,
enum dma_data_direction dir)
{
+ dma_addr_t dma_addr = dma_map_single(dev, data, len, dir);
+
talitos_ptr->len = cpu_to_be16(len);
- talitos_ptr->ptr = cpu_to_be32(dma_map_single(dev, data, len, dir));
+ to_talitos_ptr(talitos_ptr, dma_addr);
talitos_ptr->j_extent = extent;
}
@@ -182,9 +195,9 @@
return -EIO;
}
- /* set done writeback and IRQ */
- setbits32(priv->reg + TALITOS_CCCR_LO(ch), TALITOS_CCCR_LO_CDWE |
- TALITOS_CCCR_LO_CDIE);
+ /* set 36-bit addressing, done writeback enable and done IRQ enable */
+ setbits32(priv->reg + TALITOS_CCCR_LO(ch), TALITOS_CCCR_LO_EAE |
+ TALITOS_CCCR_LO_CDWE | TALITOS_CCCR_LO_CDIE);
/* and ICCR writeback, if available */
if (priv->features & TALITOS_FTR_HW_AUTH_CHECK)
@@ -282,16 +295,16 @@
/* emulate SEC's round-robin channel fifo polling scheme */
ch = atomic_inc_return(&priv->last_chan) & (priv->num_channels - 1);
- spin_lock_irqsave(&priv->head_lock[ch], flags);
+ spin_lock_irqsave(&priv->chan[ch].head_lock, flags);
- if (!atomic_inc_not_zero(&priv->submit_count[ch])) {
+ if (!atomic_inc_not_zero(&priv->chan[ch].submit_count)) {
/* h/w fifo is full */
- spin_unlock_irqrestore(&priv->head_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].head_lock, flags);
return -EAGAIN;
}
- head = priv->head[ch];
- request = &priv->fifo[ch][head];
+ head = priv->chan[ch].head;
+ request = &priv->chan[ch].fifo[head];
/* map descriptor and save caller data */
request->dma_desc = dma_map_single(dev, desc, sizeof(*desc),
@@ -300,16 +313,19 @@
request->context = context;
/* increment fifo head */
- priv->head[ch] = (priv->head[ch] + 1) & (priv->fifo_len - 1);
+ priv->chan[ch].head = (priv->chan[ch].head + 1) & (priv->fifo_len - 1);
smp_wmb();
request->desc = desc;
/* GO! */
wmb();
- out_be32(priv->reg + TALITOS_FF_LO(ch), request->dma_desc);
+ out_be32(priv->reg + TALITOS_FF(ch),
+ cpu_to_be32(upper_32_bits(request->dma_desc)));
+ out_be32(priv->reg + TALITOS_FF_LO(ch),
+ cpu_to_be32(lower_32_bits(request->dma_desc)));
- spin_unlock_irqrestore(&priv->head_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].head_lock, flags);
return -EINPROGRESS;
}
@@ -324,11 +340,11 @@
unsigned long flags;
int tail, status;
- spin_lock_irqsave(&priv->tail_lock[ch], flags);
+ spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
- tail = priv->tail[ch];
- while (priv->fifo[ch][tail].desc) {
- request = &priv->fifo[ch][tail];
+ tail = priv->chan[ch].tail;
+ while (priv->chan[ch].fifo[tail].desc) {
+ request = &priv->chan[ch].fifo[tail];
/* descriptors with their done bits set don't get the error */
rmb();
@@ -354,22 +370,22 @@
request->desc = NULL;
/* increment fifo tail */
- priv->tail[ch] = (tail + 1) & (priv->fifo_len - 1);
+ priv->chan[ch].tail = (tail + 1) & (priv->fifo_len - 1);
- spin_unlock_irqrestore(&priv->tail_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
- atomic_dec(&priv->submit_count[ch]);
+ atomic_dec(&priv->chan[ch].submit_count);
saved_req.callback(dev, saved_req.desc, saved_req.context,
status);
/* channel may resume processing in single desc error case */
if (error && !reset_ch && status == error)
return;
- spin_lock_irqsave(&priv->tail_lock[ch], flags);
- tail = priv->tail[ch];
+ spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
+ tail = priv->chan[ch].tail;
}
- spin_unlock_irqrestore(&priv->tail_lock[ch], flags);
+ spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
}
/*
@@ -397,20 +413,20 @@
static struct talitos_desc *current_desc(struct device *dev, int ch)
{
struct talitos_private *priv = dev_get_drvdata(dev);
- int tail = priv->tail[ch];
+ int tail = priv->chan[ch].tail;
dma_addr_t cur_desc;
cur_desc = in_be32(priv->reg + TALITOS_CDPR_LO(ch));
- while (priv->fifo[ch][tail].dma_desc != cur_desc) {
+ while (priv->chan[ch].fifo[tail].dma_desc != cur_desc) {
tail = (tail + 1) & (priv->fifo_len - 1);
- if (tail == priv->tail[ch]) {
+ if (tail == priv->chan[ch].tail) {
dev_err(dev, "couldn't locate current descriptor\n");
return NULL;
}
}
- return priv->fifo[ch][tail].desc;
+ return priv->chan[ch].fifo[tail].desc;
}
/*
@@ -929,7 +945,7 @@
int n_sg = sg_count;
while (n_sg--) {
- link_tbl_ptr->ptr = cpu_to_be32(sg_dma_address(sg));
+ to_talitos_ptr(link_tbl_ptr, sg_dma_address(sg));
link_tbl_ptr->len = cpu_to_be16(sg_dma_len(sg));
link_tbl_ptr->j_extent = 0;
link_tbl_ptr++;
@@ -970,7 +986,7 @@
struct talitos_desc *desc = &edesc->desc;
unsigned int cryptlen = areq->cryptlen;
unsigned int authsize = ctx->authsize;
- unsigned int ivsize;
+ unsigned int ivsize = crypto_aead_ivsize(aead);
int sg_count, ret;
int sg_link_tbl_len;
@@ -978,11 +994,9 @@
map_single_talitos_ptr(dev, &desc->ptr[0], ctx->authkeylen, &ctx->key,
0, DMA_TO_DEVICE);
/* hmac data */
- map_single_talitos_ptr(dev, &desc->ptr[1], sg_virt(areq->src) -
- sg_virt(areq->assoc), sg_virt(areq->assoc), 0,
- DMA_TO_DEVICE);
+ map_single_talitos_ptr(dev, &desc->ptr[1], areq->assoclen + ivsize,
+ sg_virt(areq->assoc), 0, DMA_TO_DEVICE);
/* cipher iv */
- ivsize = crypto_aead_ivsize(aead);
map_single_talitos_ptr(dev, &desc->ptr[2], ivsize, giv ?: areq->iv, 0,
DMA_TO_DEVICE);
@@ -1006,7 +1020,7 @@
edesc->src_is_chained);
if (sg_count == 1) {
- desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
+ to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->src));
} else {
sg_link_tbl_len = cryptlen;
@@ -1017,14 +1031,14 @@
&edesc->link_tbl[0]);
if (sg_count > 1) {
desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
- desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
+ to_talitos_ptr(&desc->ptr[4], edesc->dma_link_tbl);
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len,
DMA_BIDIRECTIONAL);
} else {
/* Only one segment now, so no link tbl needed */
- desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->
- src));
+ to_talitos_ptr(&desc->ptr[4],
+ sg_dma_address(areq->src));
}
}
@@ -1039,14 +1053,14 @@
edesc->dst_is_chained);
if (sg_count == 1) {
- desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
+ to_talitos_ptr(&desc->ptr[5], sg_dma_address(areq->dst));
} else {
struct talitos_ptr *link_tbl_ptr =
&edesc->link_tbl[edesc->src_nents + 1];
- desc->ptr[5].ptr = cpu_to_be32((struct talitos_ptr *)
- edesc->dma_link_tbl +
- edesc->src_nents + 1);
+ to_talitos_ptr(&desc->ptr[5], edesc->dma_link_tbl +
+ (edesc->src_nents + 1) *
+ sizeof(struct talitos_ptr));
sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
link_tbl_ptr);
@@ -1059,11 +1073,9 @@
link_tbl_ptr->len = cpu_to_be16(authsize);
/* icv data follows link tables */
- link_tbl_ptr->ptr = cpu_to_be32((struct talitos_ptr *)
- edesc->dma_link_tbl +
- edesc->src_nents +
- edesc->dst_nents + 2);
-
+ to_talitos_ptr(link_tbl_ptr, edesc->dma_link_tbl +
+ (edesc->src_nents + edesc->dst_nents + 2) *
+ sizeof(struct talitos_ptr));
desc->ptr[5].j_extent |= DESC_PTR_LNKTBL_JUMP;
dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
edesc->dma_len, DMA_BIDIRECTIONAL);
@@ -1338,7 +1350,7 @@
/* first DWORD empty */
desc->ptr[0].len = 0;
- desc->ptr[0].ptr = 0;
+ to_talitos_ptr(&desc->ptr[0], 0);
desc->ptr[0].j_extent = 0;
/* cipher iv */
@@ -1362,20 +1374,20 @@
edesc->src_is_chained);
if (sg_count == 1) {
- desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->src));
+ to_talitos_ptr(&desc->ptr[3], sg_dma_address(areq->src));
} else {
sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
&edesc->link_tbl[0]);
if (sg_count > 1) {
+ to_talitos_ptr(&desc->ptr[3], edesc->dma_link_tbl);
desc->ptr[3].j_extent |= DESC_PTR_LNKTBL_JUMP;
- desc->ptr[3].ptr = cpu_to_be32(edesc->dma_link_tbl);
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len,
DMA_BIDIRECTIONAL);
} else {
/* Only one segment now, so no link tbl needed */
- desc->ptr[3].ptr = cpu_to_be32(sg_dma_address(areq->
- src));
+ to_talitos_ptr(&desc->ptr[3],
+ sg_dma_address(areq->src));
}
}
@@ -1390,15 +1402,15 @@
edesc->dst_is_chained);
if (sg_count == 1) {
- desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->dst));
+ to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->dst));
} else {
struct talitos_ptr *link_tbl_ptr =
&edesc->link_tbl[edesc->src_nents + 1];
+ to_talitos_ptr(&desc->ptr[4], edesc->dma_link_tbl +
+ (edesc->src_nents + 1) *
+ sizeof(struct talitos_ptr));
desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
- desc->ptr[4].ptr = cpu_to_be32((struct talitos_ptr *)
- edesc->dma_link_tbl +
- edesc->src_nents + 1);
sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
link_tbl_ptr);
dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
@@ -1411,7 +1423,7 @@
/* last DWORD empty */
desc->ptr[6].len = 0;
- desc->ptr[6].ptr = 0;
+ to_talitos_ptr(&desc->ptr[6], 0);
desc->ptr[6].j_extent = 0;
ret = talitos_submit(dev, desc, callback, areq);
@@ -1742,17 +1754,11 @@
if (hw_supports(dev, DESC_HDR_SEL0_RNG))
talitos_unregister_rng(dev);
- kfree(priv->submit_count);
- kfree(priv->tail);
- kfree(priv->head);
+ for (i = 0; i < priv->num_channels; i++)
+ if (priv->chan[i].fifo)
+ kfree(priv->chan[i].fifo);
- if (priv->fifo)
- for (i = 0; i < priv->num_channels; i++)
- kfree(priv->fifo[i]);
-
- kfree(priv->fifo);
- kfree(priv->head_lock);
- kfree(priv->tail_lock);
+ kfree(priv->chan);
if (priv->irq != NO_IRQ) {
free_irq(priv->irq, dev);
@@ -1872,58 +1878,36 @@
if (of_device_is_compatible(np, "fsl,sec2.1"))
priv->features |= TALITOS_FTR_HW_AUTH_CHECK;
- priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
- GFP_KERNEL);
- priv->tail_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
- GFP_KERNEL);
- if (!priv->head_lock || !priv->tail_lock) {
- dev_err(dev, "failed to allocate fifo locks\n");
+ priv->chan = kzalloc(sizeof(struct talitos_channel) *
+ priv->num_channels, GFP_KERNEL);
+ if (!priv->chan) {
+ dev_err(dev, "failed to allocate channel management space\n");
err = -ENOMEM;
goto err_out;
}
for (i = 0; i < priv->num_channels; i++) {
- spin_lock_init(&priv->head_lock[i]);
- spin_lock_init(&priv->tail_lock[i]);
- }
-
- priv->fifo = kmalloc(sizeof(struct talitos_request *) *
- priv->num_channels, GFP_KERNEL);
- if (!priv->fifo) {
- dev_err(dev, "failed to allocate request fifo\n");
- err = -ENOMEM;
- goto err_out;
+ spin_lock_init(&priv->chan[i].head_lock);
+ spin_lock_init(&priv->chan[i].tail_lock);
}
priv->fifo_len = roundup_pow_of_two(priv->chfifo_len);
for (i = 0; i < priv->num_channels; i++) {
- priv->fifo[i] = kzalloc(sizeof(struct talitos_request) *
- priv->fifo_len, GFP_KERNEL);
- if (!priv->fifo[i]) {
+ priv->chan[i].fifo = kzalloc(sizeof(struct talitos_request) *
+ priv->fifo_len, GFP_KERNEL);
+ if (!priv->chan[i].fifo) {
dev_err(dev, "failed to allocate request fifo %d\n", i);
err = -ENOMEM;
goto err_out;
}
}
- priv->submit_count = kmalloc(sizeof(atomic_t) * priv->num_channels,
- GFP_KERNEL);
- if (!priv->submit_count) {
- dev_err(dev, "failed to allocate fifo submit count space\n");
- err = -ENOMEM;
- goto err_out;
- }
for (i = 0; i < priv->num_channels; i++)
- atomic_set(&priv->submit_count[i], -(priv->chfifo_len - 1));
+ atomic_set(&priv->chan[i].submit_count,
+ -(priv->chfifo_len - 1));
- priv->head = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
- priv->tail = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
- if (!priv->head || !priv->tail) {
- dev_err(dev, "failed to allocate request index space\n");
- err = -ENOMEM;
- goto err_out;
- }
+ dma_set_mask(dev, DMA_BIT_MASK(36));
/* reset and initialize the h/w */
err = init_device(dev);
diff --git a/drivers/crypto/talitos.h b/drivers/crypto/talitos.h
index 575981f..ff5a145 100644
--- a/drivers/crypto/talitos.h
+++ b/drivers/crypto/talitos.h
@@ -57,6 +57,7 @@
#define TALITOS_CCCR_RESET 0x1 /* channel reset */
#define TALITOS_CCCR_LO(ch) (ch * TALITOS_CH_STRIDE + 0x110c)
#define TALITOS_CCCR_LO_IWSE 0x80 /* chan. ICCR writeback enab. */
+#define TALITOS_CCCR_LO_EAE 0x20 /* extended address enable */
#define TALITOS_CCCR_LO_CDWE 0x10 /* chan. done writeback enab. */
#define TALITOS_CCCR_LO_NT 0x4 /* notification type */
#define TALITOS_CCCR_LO_CDIE 0x2 /* channel done IRQ enable */
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 98aa4a7..cfa033c 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -17,6 +17,10 @@
edac_core-objs += edac_pci.o edac_pci_sysfs.o
endif
+ifdef CONFIG_CPU_SUP_AMD
+edac_core-objs += edac_mce_amd.o
+endif
+
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
@@ -32,7 +36,7 @@
obj-$(CONFIG_EDAC_I82860) += i82860_edac.o
obj-$(CONFIG_EDAC_R82600) += r82600_edac.o
-amd64_edac_mod-y := amd64_edac_err_types.o amd64_edac.o
+amd64_edac_mod-y := amd64_edac.o
amd64_edac_mod-$(CONFIG_EDAC_DEBUG) += amd64_edac_dbg.o
amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index e2a10bc..173dc4a 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -19,6 +19,63 @@
static struct amd64_pvt *pvt_lookup[MAX_NUMNODES];
/*
+ * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
+ * for DDR2 DRAM mapping.
+ */
+u32 revf_quad_ddr2_shift[] = {
+ 0, /* 0000b NULL DIMM (128mb) */
+ 28, /* 0001b 256mb */
+ 29, /* 0010b 512mb */
+ 29, /* 0011b 512mb */
+ 29, /* 0100b 512mb */
+ 30, /* 0101b 1gb */
+ 30, /* 0110b 1gb */
+ 31, /* 0111b 2gb */
+ 31, /* 1000b 2gb */
+ 32, /* 1001b 4gb */
+ 32, /* 1010b 4gb */
+ 33, /* 1011b 8gb */
+ 0, /* 1100b future */
+ 0, /* 1101b future */
+ 0, /* 1110b future */
+ 0 /* 1111b future */
+};
+
+/*
+ * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
+ * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
+ * or higher value'.
+ *
+ *FIXME: Produce a better mapping/linearisation.
+ */
+
+struct scrubrate scrubrates[] = {
+ { 0x01, 1600000000UL},
+ { 0x02, 800000000UL},
+ { 0x03, 400000000UL},
+ { 0x04, 200000000UL},
+ { 0x05, 100000000UL},
+ { 0x06, 50000000UL},
+ { 0x07, 25000000UL},
+ { 0x08, 12284069UL},
+ { 0x09, 6274509UL},
+ { 0x0A, 3121951UL},
+ { 0x0B, 1560975UL},
+ { 0x0C, 781440UL},
+ { 0x0D, 390720UL},
+ { 0x0E, 195300UL},
+ { 0x0F, 97650UL},
+ { 0x10, 48854UL},
+ { 0x11, 24427UL},
+ { 0x12, 12213UL},
+ { 0x13, 6101UL},
+ { 0x14, 3051UL},
+ { 0x15, 1523UL},
+ { 0x16, 761UL},
+ { 0x00, 0UL}, /* scrubbing off */
+};
+
+/*
* Memory scrubber control interface. For K8, memory scrubbing is handled by
* hardware and can involve L2 cache, dcache as well as the main memory. With
* F10, this is extended to L3 cache scrubbing on CPU models sporting that
@@ -693,7 +750,7 @@
* specific.
*/
static u64 extract_error_address(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+ struct err_regs *info)
{
struct amd64_pvt *pvt = mci->pvt_info;
@@ -1049,7 +1106,7 @@
/* extract the ERROR ADDRESS for the K8 CPUs */
static u64 k8_get_error_address(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+ struct err_regs *info)
{
return (((u64) (info->nbeah & 0xff)) << 32) +
(info->nbeal & ~0x03);
@@ -1092,7 +1149,7 @@
}
static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info,
+ struct err_regs *info,
u64 SystemAddress)
{
struct mem_ctl_info *src_mci;
@@ -1101,8 +1158,8 @@
u32 page, offset;
/* Extract the syndrome parts and form a 16-bit syndrome */
- syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
- syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
+ syndrome = HIGH_SYNDROME(info->nbsl) << 8;
+ syndrome |= LOW_SYNDROME(info->nbsh);
/* CHIPKILL enabled */
if (info->nbcfg & K8_NBCFG_CHIPKILL) {
@@ -1311,7 +1368,7 @@
}
static u64 f10_get_error_address(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+ struct err_regs *info)
{
return (((u64) (info->nbeah & 0xffff)) << 32) +
(info->nbeal & ~0x01);
@@ -1688,7 +1745,7 @@
* The @sys_addr is usually an error address received from the hardware.
*/
static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info,
+ struct err_regs *info,
u64 sys_addr)
{
struct amd64_pvt *pvt = mci->pvt_info;
@@ -1701,8 +1758,8 @@
if (csrow >= 0) {
error_address_to_page_and_offset(sys_addr, &page, &offset);
- syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
- syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
+ syndrome = HIGH_SYNDROME(info->nbsl) << 8;
+ syndrome |= LOW_SYNDROME(info->nbsh);
/*
* Is CHIPKILL on? If so, then we can attempt to use the
@@ -2045,7 +2102,7 @@
* - 0: if no valid error is indicated
*/
static int amd64_get_error_info_regs(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *regs)
+ struct err_regs *regs)
{
struct amd64_pvt *pvt;
struct pci_dev *misc_f3_ctl;
@@ -2094,10 +2151,10 @@
* - 0: if no error is found
*/
static int amd64_get_error_info(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+ struct err_regs *info)
{
struct amd64_pvt *pvt;
- struct amd64_error_info_regs regs;
+ struct err_regs regs;
pvt = mci->pvt_info;
@@ -2152,48 +2209,12 @@
return 1;
}
-static inline void amd64_decode_gart_tlb_error(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
-{
- u32 err_code;
- u32 ec_tt; /* error code transaction type (2b) */
- u32 ec_ll; /* error code cache level (2b) */
-
- err_code = EXTRACT_ERROR_CODE(info->nbsl);
- ec_ll = EXTRACT_LL_CODE(err_code);
- ec_tt = EXTRACT_TT_CODE(err_code);
-
- amd64_mc_printk(mci, KERN_ERR,
- "GART TLB event: transaction type(%s), "
- "cache level(%s)\n", tt_msgs[ec_tt], ll_msgs[ec_ll]);
-}
-
-static inline void amd64_decode_mem_cache_error(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
-{
- u32 err_code;
- u32 ec_rrrr; /* error code memory transaction (4b) */
- u32 ec_tt; /* error code transaction type (2b) */
- u32 ec_ll; /* error code cache level (2b) */
-
- err_code = EXTRACT_ERROR_CODE(info->nbsl);
- ec_ll = EXTRACT_LL_CODE(err_code);
- ec_tt = EXTRACT_TT_CODE(err_code);
- ec_rrrr = EXTRACT_RRRR_CODE(err_code);
-
- amd64_mc_printk(mci, KERN_ERR,
- "cache hierarchy error: memory transaction type(%s), "
- "transaction type(%s), cache level(%s)\n",
- rrrr_msgs[ec_rrrr], tt_msgs[ec_tt], ll_msgs[ec_ll]);
-}
-
-
/*
* Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR
* ADDRESS and process.
*/
static void amd64_handle_ce(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+ struct err_regs *info)
{
struct amd64_pvt *pvt = mci->pvt_info;
u64 SystemAddress;
@@ -2216,7 +2237,7 @@
/* Handle any Un-correctable Errors (UEs) */
static void amd64_handle_ue(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+ struct err_regs *info)
{
int csrow;
u64 SystemAddress;
@@ -2261,59 +2282,24 @@
}
}
-static void amd64_decode_bus_error(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info)
+static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
+ struct err_regs *info)
{
- u32 err_code, ext_ec;
- u32 ec_pp; /* error code participating processor (2p) */
- u32 ec_to; /* error code timed out (1b) */
- u32 ec_rrrr; /* error code memory transaction (4b) */
- u32 ec_ii; /* error code memory or I/O (2b) */
- u32 ec_ll; /* error code cache level (2b) */
+ u32 ec = ERROR_CODE(info->nbsl);
+ u32 xec = EXT_ERROR_CODE(info->nbsl);
+ int ecc_type = info->nbsh & (0x3 << 13);
- ext_ec = EXTRACT_EXT_ERROR_CODE(info->nbsl);
- err_code = EXTRACT_ERROR_CODE(info->nbsl);
-
- ec_ll = EXTRACT_LL_CODE(err_code);
- ec_ii = EXTRACT_II_CODE(err_code);
- ec_rrrr = EXTRACT_RRRR_CODE(err_code);
- ec_to = EXTRACT_TO_CODE(err_code);
- ec_pp = EXTRACT_PP_CODE(err_code);
-
- amd64_mc_printk(mci, KERN_ERR,
- "BUS ERROR:\n"
- " time-out(%s) mem or i/o(%s)\n"
- " participating processor(%s)\n"
- " memory transaction type(%s)\n"
- " cache level(%s) Error Found by: %s\n",
- to_msgs[ec_to],
- ii_msgs[ec_ii],
- pp_msgs[ec_pp],
- rrrr_msgs[ec_rrrr],
- ll_msgs[ec_ll],
- (info->nbsh & K8_NBSH_ERR_SCRUBER) ?
- "Scrubber" : "Normal Operation");
-
- /* If this was an 'observed' error, early out */
- if (ec_pp == K8_NBSL_PP_OBS)
- return; /* We aren't the node involved */
-
- /* Parse out the extended error code for ECC events */
- switch (ext_ec) {
- /* F10 changed to one Extended ECC error code */
- case F10_NBSL_EXT_ERR_RES: /* Reserved field */
- case F10_NBSL_EXT_ERR_ECC: /* F10 ECC ext err code */
- break;
-
- default:
- amd64_mc_printk(mci, KERN_ERR, "NOT ECC: no special error "
- "handling for this error\n");
+ /* Bail early out if this was an 'observed' error */
+ if (PP(ec) == K8_NBSL_PP_OBS)
return;
- }
- if (info->nbsh & K8_NBSH_CECC)
+ /* Do only ECC errors */
+ if (xec && xec != F10_NBSL_EXT_ERR_ECC)
+ return;
+
+ if (ecc_type == 2)
amd64_handle_ce(mci, info);
- else if (info->nbsh & K8_NBSH_UECC)
+ else if (ecc_type == 1)
amd64_handle_ue(mci, info);
/*
@@ -2324,139 +2310,26 @@
* catastrophic.
*/
if (info->nbsh & K8_NBSH_OVERFLOW)
- edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR
- "Error Overflow set");
+ edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR "Error Overflow");
}
-int amd64_process_error_info(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info,
- int handle_errors)
+void amd64_decode_bus_error(int node_id, struct err_regs *regs)
{
- struct amd64_pvt *pvt;
- struct amd64_error_info_regs *regs;
- u32 err_code, ext_ec;
- int gart_tlb_error = 0;
+ struct mem_ctl_info *mci = mci_lookup[node_id];
- pvt = mci->pvt_info;
-
- /* If caller doesn't want us to process the error, return */
- if (!handle_errors)
- return 1;
-
- regs = info;
-
- debugf1("NorthBridge ERROR: mci(0x%p)\n", mci);
- debugf1(" MC node(%d) Error-Address(0x%.8x-%.8x)\n",
- pvt->mc_node_id, regs->nbeah, regs->nbeal);
- debugf1(" nbsh(0x%.8x) nbsl(0x%.8x)\n",
- regs->nbsh, regs->nbsl);
- debugf1(" Valid Error=%s Overflow=%s\n",
- (regs->nbsh & K8_NBSH_VALID_BIT) ? "True" : "False",
- (regs->nbsh & K8_NBSH_OVERFLOW) ? "True" : "False");
- debugf1(" Err Uncorrected=%s MCA Error Reporting=%s\n",
- (regs->nbsh & K8_NBSH_UNCORRECTED_ERR) ?
- "True" : "False",
- (regs->nbsh & K8_NBSH_ERR_ENABLE) ?
- "True" : "False");
- debugf1(" MiscErr Valid=%s ErrAddr Valid=%s PCC=%s\n",
- (regs->nbsh & K8_NBSH_MISC_ERR_VALID) ?
- "True" : "False",
- (regs->nbsh & K8_NBSH_VALID_ERROR_ADDR) ?
- "True" : "False",
- (regs->nbsh & K8_NBSH_PCC) ?
- "True" : "False");
- debugf1(" CECC=%s UECC=%s Found by Scruber=%s\n",
- (regs->nbsh & K8_NBSH_CECC) ?
- "True" : "False",
- (regs->nbsh & K8_NBSH_UECC) ?
- "True" : "False",
- (regs->nbsh & K8_NBSH_ERR_SCRUBER) ?
- "True" : "False");
- debugf1(" CORE0=%s CORE1=%s CORE2=%s CORE3=%s\n",
- (regs->nbsh & K8_NBSH_CORE0) ? "True" : "False",
- (regs->nbsh & K8_NBSH_CORE1) ? "True" : "False",
- (regs->nbsh & K8_NBSH_CORE2) ? "True" : "False",
- (regs->nbsh & K8_NBSH_CORE3) ? "True" : "False");
-
-
- err_code = EXTRACT_ERROR_CODE(regs->nbsl);
-
- /* Determine which error type:
- * 1) GART errors - non-fatal, developmental events
- * 2) MEMORY errors
- * 3) BUS errors
- * 4) Unknown error
- */
- if (TEST_TLB_ERROR(err_code)) {
- /*
- * GART errors are intended to help graphics driver developers
- * to detect bad GART PTEs. It is recommended by AMD to disable
- * GART table walk error reporting by default[1] (currently
- * being disabled in mce_cpu_quirks()) and according to the
- * comment in mce_cpu_quirks(), such GART errors can be
- * incorrectly triggered. We may see these errors anyway and
- * unless requested by the user, they won't be reported.
- *
- * [1] section 13.10.1 on BIOS and Kernel Developers Guide for
- * AMD NPT family 0Fh processors
- */
- if (report_gart_errors == 0)
- return 1;
-
- /*
- * Only if GART error reporting is requested should we generate
- * any logs.
- */
- gart_tlb_error = 1;
-
- debugf1("GART TLB error\n");
- amd64_decode_gart_tlb_error(mci, info);
- } else if (TEST_MEM_ERROR(err_code)) {
- debugf1("Memory/Cache error\n");
- amd64_decode_mem_cache_error(mci, info);
- } else if (TEST_BUS_ERROR(err_code)) {
- debugf1("Bus (Link/DRAM) error\n");
- amd64_decode_bus_error(mci, info);
- } else {
- /* shouldn't reach here! */
- amd64_mc_printk(mci, KERN_WARNING,
- "%s(): unknown MCE error 0x%x\n", __func__,
- err_code);
- }
-
- ext_ec = EXTRACT_EXT_ERROR_CODE(regs->nbsl);
- amd64_mc_printk(mci, KERN_ERR,
- "ExtErr=(0x%x) %s\n", ext_ec, ext_msgs[ext_ec]);
-
- if (((ext_ec >= F10_NBSL_EXT_ERR_CRC &&
- ext_ec <= F10_NBSL_EXT_ERR_TGT) ||
- (ext_ec == F10_NBSL_EXT_ERR_RMW)) &&
- EXTRACT_LDT_LINK(info->nbsh)) {
-
- amd64_mc_printk(mci, KERN_ERR,
- "Error on hypertransport link: %s\n",
- htlink_msgs[
- EXTRACT_LDT_LINK(info->nbsh)]);
- }
+ __amd64_decode_bus_error(mci, regs);
/*
* Check the UE bit of the NB status high register, if set generate some
* logs. If NOT a GART error, then process the event as a NO-INFO event.
* If it was a GART error, skip that process.
+ *
+ * FIXME: this should go somewhere else, if at all.
*/
- if (regs->nbsh & K8_NBSH_UNCORRECTED_ERR) {
- amd64_mc_printk(mci, KERN_CRIT, "uncorrected error\n");
- if (!gart_tlb_error)
- edac_mc_handle_ue_no_info(mci, "UE bit is set\n");
- }
+ if (regs->nbsh & K8_NBSH_UC_ERR && !report_gart_errors)
+ edac_mc_handle_ue_no_info(mci, "UE bit is set");
- if (regs->nbsh & K8_NBSH_PCC)
- amd64_mc_printk(mci, KERN_CRIT,
- "PCC (processor context corrupt) set\n");
-
- return 1;
}
-EXPORT_SYMBOL_GPL(amd64_process_error_info);
/*
* The main polling 'check' function, called FROM the edac core to perform the
@@ -2464,10 +2337,12 @@
*/
static void amd64_check(struct mem_ctl_info *mci)
{
- struct amd64_error_info_regs info;
+ struct err_regs regs;
- if (amd64_get_error_info(mci, &info))
- amd64_process_error_info(mci, &info, 1);
+ if (amd64_get_error_info(mci, ®s)) {
+ struct amd64_pvt *pvt = mci->pvt_info;
+ amd_decode_nb_mce(pvt->mc_node_id, ®s, 1);
+ }
}
/*
@@ -3163,6 +3038,13 @@
mci_lookup[node_id] = mci;
pvt_lookup[node_id] = NULL;
+
+ /* register stuff with EDAC MCE */
+ if (report_gart_errors)
+ amd_report_gart_errors(true);
+
+ amd_register_ecc_decoder(amd64_decode_bus_error);
+
return 0;
err_add_mc:
@@ -3229,6 +3111,10 @@
mci_lookup[pvt->mc_node_id] = NULL;
+ /* unregister from EDAC MCE */
+ amd_report_gart_errors(false);
+ amd_unregister_ecc_decoder(amd64_decode_bus_error);
+
/* Free the EDAC CORE resources */
edac_mc_free(mci);
}
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index ba73015..8ea07e2 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -72,6 +72,7 @@
#include <linux/edac.h>
#include <asm/msr.h>
#include "edac_core.h"
+#include "edac_mce_amd.h"
#define amd64_printk(level, fmt, arg...) \
edac_printk(level, "amd64", fmt, ##arg)
@@ -303,21 +304,9 @@
#define K8_NBSL 0x48
-#define EXTRACT_HIGH_SYNDROME(x) (((x) >> 24) & 0xff)
-#define EXTRACT_EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f)
-
/* Family F10h: Normalized Extended Error Codes */
#define F10_NBSL_EXT_ERR_RES 0x0
-#define F10_NBSL_EXT_ERR_CRC 0x1
-#define F10_NBSL_EXT_ERR_SYNC 0x2
-#define F10_NBSL_EXT_ERR_MST 0x3
-#define F10_NBSL_EXT_ERR_TGT 0x4
-#define F10_NBSL_EXT_ERR_GART 0x5
-#define F10_NBSL_EXT_ERR_RMW 0x6
-#define F10_NBSL_EXT_ERR_WDT 0x7
#define F10_NBSL_EXT_ERR_ECC 0x8
-#define F10_NBSL_EXT_ERR_DEV 0x9
-#define F10_NBSL_EXT_ERR_LINK_DATA 0xA
/* Next two are overloaded values */
#define F10_NBSL_EXT_ERR_LINK_PROTO 0xB
@@ -348,17 +337,6 @@
#define K8_NBSL_EXT_ERR_CHIPKILL_ECC 0x8
#define K8_NBSL_EXT_ERR_DRAM_PARITY 0xD
-#define EXTRACT_ERROR_CODE(x) ((x) & 0xffff)
-#define TEST_TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
-#define TEST_MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
-#define TEST_BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
-#define EXTRACT_TT_CODE(x) (((x) >> 2) & 0x3)
-#define EXTRACT_II_CODE(x) (((x) >> 2) & 0x3)
-#define EXTRACT_LL_CODE(x) (((x) >> 0) & 0x3)
-#define EXTRACT_RRRR_CODE(x) (((x) >> 4) & 0xf)
-#define EXTRACT_TO_CODE(x) (((x) >> 8) & 0x1)
-#define EXTRACT_PP_CODE(x) (((x) >> 9) & 0x3)
-
/*
* The following are for BUS type errors AFTER values have been normalized by
* shifting right
@@ -368,28 +346,7 @@
#define K8_NBSL_PP_OBS 0x2
#define K8_NBSL_PP_GENERIC 0x3
-
-#define K8_NBSH 0x4C
-
-#define K8_NBSH_VALID_BIT BIT(31)
-#define K8_NBSH_OVERFLOW BIT(30)
-#define K8_NBSH_UNCORRECTED_ERR BIT(29)
-#define K8_NBSH_ERR_ENABLE BIT(28)
-#define K8_NBSH_MISC_ERR_VALID BIT(27)
-#define K8_NBSH_VALID_ERROR_ADDR BIT(26)
-#define K8_NBSH_PCC BIT(25)
-#define K8_NBSH_CECC BIT(14)
-#define K8_NBSH_UECC BIT(13)
-#define K8_NBSH_ERR_SCRUBER BIT(8)
-#define K8_NBSH_CORE3 BIT(3)
-#define K8_NBSH_CORE2 BIT(2)
-#define K8_NBSH_CORE1 BIT(1)
-#define K8_NBSH_CORE0 BIT(0)
-
-#define EXTRACT_LDT_LINK(x) (((x) >> 4) & 0x7)
#define EXTRACT_ERR_CPU_MAP(x) ((x) & 0xF)
-#define EXTRACT_LOW_SYNDROME(x) (((x) >> 15) & 0xff)
-
#define K8_NBEAL 0x50
#define K8_NBEAH 0x54
@@ -455,23 +412,6 @@
F11_CPUS,
};
-/*
- * Structure to hold:
- *
- * 1) dynamically read status and error address HW registers
- * 2) sysfs entered values
- * 3) MCE values
- *
- * Depends on entry into the modules
- */
-struct amd64_error_info_regs {
- u32 nbcfg;
- u32 nbsh;
- u32 nbsl;
- u32 nbeah;
- u32 nbeal;
-};
-
/* Error injection control structure */
struct error_injection {
u32 section;
@@ -542,7 +482,7 @@
u32 online_spare; /* On-Line spare Reg */
/* temp storage for when input is received from sysfs */
- struct amd64_error_info_regs ctl_error_info;
+ struct err_regs ctl_error_info;
/* place to store error injection parameters prior to issue */
struct error_injection injection;
@@ -601,11 +541,11 @@
int (*early_channel_count)(struct amd64_pvt *pvt);
u64 (*get_error_address)(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info);
+ struct err_regs *info);
void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info,
+ struct err_regs *info,
u64 SystemAddr);
int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
};
@@ -637,8 +577,5 @@
#define F10_MIN_SCRUB_RATE_BITS 0x5
#define F11_MIN_SCRUB_RATE_BITS 0x6
-int amd64_process_error_info(struct mem_ctl_info *mci,
- struct amd64_error_info_regs *info,
- int handle_errors);
int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
u64 *hole_offset, u64 *hole_size);
diff --git a/drivers/edac/amd64_edac_dbg.c b/drivers/edac/amd64_edac_dbg.c
index 0a41b24..59cf2cf 100644
--- a/drivers/edac/amd64_edac_dbg.c
+++ b/drivers/edac/amd64_edac_dbg.c
@@ -24,7 +24,7 @@
/* Process the Mapping request */
/* TODO: Add race prevention */
- amd64_process_error_info(mci, &pvt->ctl_error_info, 1);
+ amd_decode_nb_mce(pvt->mc_node_id, &pvt->ctl_error_info, 1);
return count;
}
diff --git a/drivers/edac/amd64_edac_err_types.c b/drivers/edac/amd64_edac_err_types.c
deleted file mode 100644
index f212ff1..0000000
--- a/drivers/edac/amd64_edac_err_types.c
+++ /dev/null
@@ -1,161 +0,0 @@
-#include "amd64_edac.h"
-
-/*
- * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
- * for DDR2 DRAM mapping.
- */
-u32 revf_quad_ddr2_shift[] = {
- 0, /* 0000b NULL DIMM (128mb) */
- 28, /* 0001b 256mb */
- 29, /* 0010b 512mb */
- 29, /* 0011b 512mb */
- 29, /* 0100b 512mb */
- 30, /* 0101b 1gb */
- 30, /* 0110b 1gb */
- 31, /* 0111b 2gb */
- 31, /* 1000b 2gb */
- 32, /* 1001b 4gb */
- 32, /* 1010b 4gb */
- 33, /* 1011b 8gb */
- 0, /* 1100b future */
- 0, /* 1101b future */
- 0, /* 1110b future */
- 0 /* 1111b future */
-};
-
-/*
- * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
- * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
- * or higher value'.
- *
- *FIXME: Produce a better mapping/linearisation.
- */
-
-struct scrubrate scrubrates[] = {
- { 0x01, 1600000000UL},
- { 0x02, 800000000UL},
- { 0x03, 400000000UL},
- { 0x04, 200000000UL},
- { 0x05, 100000000UL},
- { 0x06, 50000000UL},
- { 0x07, 25000000UL},
- { 0x08, 12284069UL},
- { 0x09, 6274509UL},
- { 0x0A, 3121951UL},
- { 0x0B, 1560975UL},
- { 0x0C, 781440UL},
- { 0x0D, 390720UL},
- { 0x0E, 195300UL},
- { 0x0F, 97650UL},
- { 0x10, 48854UL},
- { 0x11, 24427UL},
- { 0x12, 12213UL},
- { 0x13, 6101UL},
- { 0x14, 3051UL},
- { 0x15, 1523UL},
- { 0x16, 761UL},
- { 0x00, 0UL}, /* scrubbing off */
-};
-
-/*
- * string representation for the different MCA reported error types, see F3x48
- * or MSR0000_0411.
- */
-const char *tt_msgs[] = { /* transaction type */
- "instruction",
- "data",
- "generic",
- "reserved"
-};
-
-const char *ll_msgs[] = { /* cache level */
- "L0",
- "L1",
- "L2",
- "L3/generic"
-};
-
-const char *rrrr_msgs[] = {
- "generic",
- "generic read",
- "generic write",
- "data read",
- "data write",
- "inst fetch",
- "prefetch",
- "evict",
- "snoop",
- "reserved RRRR= 9",
- "reserved RRRR= 10",
- "reserved RRRR= 11",
- "reserved RRRR= 12",
- "reserved RRRR= 13",
- "reserved RRRR= 14",
- "reserved RRRR= 15"
-};
-
-const char *pp_msgs[] = { /* participating processor */
- "local node originated (SRC)",
- "local node responded to request (RES)",
- "local node observed as 3rd party (OBS)",
- "generic"
-};
-
-const char *to_msgs[] = {
- "no timeout",
- "timed out"
-};
-
-const char *ii_msgs[] = { /* memory or i/o */
- "mem access",
- "reserved",
- "i/o access",
- "generic"
-};
-
-/* Map the 5 bits of Extended Error code to the string table. */
-const char *ext_msgs[] = { /* extended error */
- "K8 ECC error/F10 reserved", /* 0_0000b */
- "CRC error", /* 0_0001b */
- "sync error", /* 0_0010b */
- "mst abort", /* 0_0011b */
- "tgt abort", /* 0_0100b */
- "GART error", /* 0_0101b */
- "RMW error", /* 0_0110b */
- "Wdog timer error", /* 0_0111b */
- "F10-ECC/K8-Chipkill error", /* 0_1000b */
- "DEV Error", /* 0_1001b */
- "Link Data error", /* 0_1010b */
- "Link or L3 Protocol error", /* 0_1011b */
- "NB Array error", /* 0_1100b */
- "DRAM Parity error", /* 0_1101b */
- "Link Retry/GART Table Walk/DEV Table Walk error", /* 0_1110b */
- "Res 0x0ff error", /* 0_1111b */
- "Res 0x100 error", /* 1_0000b */
- "Res 0x101 error", /* 1_0001b */
- "Res 0x102 error", /* 1_0010b */
- "Res 0x103 error", /* 1_0011b */
- "Res 0x104 error", /* 1_0100b */
- "Res 0x105 error", /* 1_0101b */
- "Res 0x106 error", /* 1_0110b */
- "Res 0x107 error", /* 1_0111b */
- "Res 0x108 error", /* 1_1000b */
- "Res 0x109 error", /* 1_1001b */
- "Res 0x10A error", /* 1_1010b */
- "Res 0x10B error", /* 1_1011b */
- "L3 Cache Data error", /* 1_1100b */
- "L3 CacheTag error", /* 1_1101b */
- "L3 Cache LRU error", /* 1_1110b */
- "Res 0x1FF error" /* 1_1111b */
-};
-
-const char *htlink_msgs[] = {
- "none",
- "1",
- "2",
- "1 2",
- "3",
- "1 3",
- "2 3",
- "1 2 3"
-};
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
new file mode 100644
index 0000000..c8ca713
--- /dev/null
+++ b/drivers/edac/edac_mce_amd.c
@@ -0,0 +1,422 @@
+#include <linux/module.h>
+#include "edac_mce_amd.h"
+
+static bool report_gart_errors;
+static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
+
+void amd_report_gart_errors(bool v)
+{
+ report_gart_errors = v;
+}
+EXPORT_SYMBOL_GPL(amd_report_gart_errors);
+
+void amd_register_ecc_decoder(void (*f)(int, struct err_regs *))
+{
+ nb_bus_decoder = f;
+}
+EXPORT_SYMBOL_GPL(amd_register_ecc_decoder);
+
+void amd_unregister_ecc_decoder(void (*f)(int, struct err_regs *))
+{
+ if (nb_bus_decoder) {
+ WARN_ON(nb_bus_decoder != f);
+
+ nb_bus_decoder = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(amd_unregister_ecc_decoder);
+
+/*
+ * string representation for the different MCA reported error types, see F3x48
+ * or MSR0000_0411.
+ */
+const char *tt_msgs[] = { /* transaction type */
+ "instruction",
+ "data",
+ "generic",
+ "reserved"
+};
+EXPORT_SYMBOL_GPL(tt_msgs);
+
+const char *ll_msgs[] = { /* cache level */
+ "L0",
+ "L1",
+ "L2",
+ "L3/generic"
+};
+EXPORT_SYMBOL_GPL(ll_msgs);
+
+const char *rrrr_msgs[] = {
+ "generic",
+ "generic read",
+ "generic write",
+ "data read",
+ "data write",
+ "inst fetch",
+ "prefetch",
+ "evict",
+ "snoop",
+ "reserved RRRR= 9",
+ "reserved RRRR= 10",
+ "reserved RRRR= 11",
+ "reserved RRRR= 12",
+ "reserved RRRR= 13",
+ "reserved RRRR= 14",
+ "reserved RRRR= 15"
+};
+EXPORT_SYMBOL_GPL(rrrr_msgs);
+
+const char *pp_msgs[] = { /* participating processor */
+ "local node originated (SRC)",
+ "local node responded to request (RES)",
+ "local node observed as 3rd party (OBS)",
+ "generic"
+};
+EXPORT_SYMBOL_GPL(pp_msgs);
+
+const char *to_msgs[] = {
+ "no timeout",
+ "timed out"
+};
+EXPORT_SYMBOL_GPL(to_msgs);
+
+const char *ii_msgs[] = { /* memory or i/o */
+ "mem access",
+ "reserved",
+ "i/o access",
+ "generic"
+};
+EXPORT_SYMBOL_GPL(ii_msgs);
+
+/*
+ * Map the 4 or 5 (family-specific) bits of Extended Error code to the
+ * string table.
+ */
+const char *ext_msgs[] = {
+ "K8 ECC error", /* 0_0000b */
+ "CRC error on link", /* 0_0001b */
+ "Sync error packets on link", /* 0_0010b */
+ "Master Abort during link operation", /* 0_0011b */
+ "Target Abort during link operation", /* 0_0100b */
+ "Invalid GART PTE entry during table walk", /* 0_0101b */
+ "Unsupported atomic RMW command received", /* 0_0110b */
+ "WDT error: NB transaction timeout", /* 0_0111b */
+ "ECC/ChipKill ECC error", /* 0_1000b */
+ "SVM DEV Error", /* 0_1001b */
+ "Link Data error", /* 0_1010b */
+ "Link/L3/Probe Filter Protocol error", /* 0_1011b */
+ "NB Internal Arrays Parity error", /* 0_1100b */
+ "DRAM Address/Control Parity error", /* 0_1101b */
+ "Link Transmission error", /* 0_1110b */
+ "GART/DEV Table Walk Data error" /* 0_1111b */
+ "Res 0x100 error", /* 1_0000b */
+ "Res 0x101 error", /* 1_0001b */
+ "Res 0x102 error", /* 1_0010b */
+ "Res 0x103 error", /* 1_0011b */
+ "Res 0x104 error", /* 1_0100b */
+ "Res 0x105 error", /* 1_0101b */
+ "Res 0x106 error", /* 1_0110b */
+ "Res 0x107 error", /* 1_0111b */
+ "Res 0x108 error", /* 1_1000b */
+ "Res 0x109 error", /* 1_1001b */
+ "Res 0x10A error", /* 1_1010b */
+ "Res 0x10B error", /* 1_1011b */
+ "ECC error in L3 Cache Data", /* 1_1100b */
+ "L3 Cache Tag error", /* 1_1101b */
+ "L3 Cache LRU Parity error", /* 1_1110b */
+ "Probe Filter error" /* 1_1111b */
+};
+EXPORT_SYMBOL_GPL(ext_msgs);
+
+static void amd_decode_dc_mce(u64 mc0_status)
+{
+ u32 ec = mc0_status & 0xffff;
+ u32 xec = (mc0_status >> 16) & 0xf;
+
+ pr_emerg(" Data Cache Error");
+
+ if (xec == 1 && TLB_ERROR(ec))
+ pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
+ else if (xec == 0) {
+ if (mc0_status & (1ULL << 40))
+ pr_cont(" during Data Scrub.\n");
+ else if (TLB_ERROR(ec))
+ pr_cont(": %s TLB parity error.\n", LL_MSG(ec));
+ else if (MEM_ERROR(ec)) {
+ u8 ll = ec & 0x3;
+ u8 tt = (ec >> 2) & 0x3;
+ u8 rrrr = (ec >> 4) & 0xf;
+
+ /* see F10h BKDG (31116), Table 92. */
+ if (ll == 0x1) {
+ if (tt != 0x1)
+ goto wrong_dc_mce;
+
+ pr_cont(": Data/Tag %s error.\n", RRRR_MSG(ec));
+
+ } else if (ll == 0x2 && rrrr == 0x3)
+ pr_cont(" during L1 linefill from L2.\n");
+ else
+ goto wrong_dc_mce;
+ } else if (BUS_ERROR(ec) && boot_cpu_data.x86 == 0xf)
+ pr_cont(" during system linefill.\n");
+ else
+ goto wrong_dc_mce;
+ } else
+ goto wrong_dc_mce;
+
+ return;
+
+wrong_dc_mce:
+ pr_warning("Corrupted DC MCE info?\n");
+}
+
+static void amd_decode_ic_mce(u64 mc1_status)
+{
+ u32 ec = mc1_status & 0xffff;
+ u32 xec = (mc1_status >> 16) & 0xf;
+
+ pr_emerg(" Instruction Cache Error");
+
+ if (xec == 1 && TLB_ERROR(ec))
+ pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
+ else if (xec == 0) {
+ if (TLB_ERROR(ec))
+ pr_cont(": %s TLB Parity error.\n", LL_MSG(ec));
+ else if (BUS_ERROR(ec)) {
+ if (boot_cpu_data.x86 == 0xf &&
+ (mc1_status & (1ULL << 58)))
+ pr_cont(" during system linefill.\n");
+ else
+ pr_cont(" during attempted NB data read.\n");
+ } else if (MEM_ERROR(ec)) {
+ u8 ll = ec & 0x3;
+ u8 rrrr = (ec >> 4) & 0xf;
+
+ if (ll == 0x2)
+ pr_cont(" during a linefill from L2.\n");
+ else if (ll == 0x1) {
+
+ switch (rrrr) {
+ case 0x5:
+ pr_cont(": Parity error during "
+ "data load.\n");
+ break;
+
+ case 0x7:
+ pr_cont(": Copyback Parity/Victim"
+ " error.\n");
+ break;
+
+ case 0x8:
+ pr_cont(": Tag Snoop error.\n");
+ break;
+
+ default:
+ goto wrong_ic_mce;
+ break;
+ }
+ }
+ } else
+ goto wrong_ic_mce;
+ } else
+ goto wrong_ic_mce;
+
+ return;
+
+wrong_ic_mce:
+ pr_warning("Corrupted IC MCE info?\n");
+}
+
+static void amd_decode_bu_mce(u64 mc2_status)
+{
+ u32 ec = mc2_status & 0xffff;
+ u32 xec = (mc2_status >> 16) & 0xf;
+
+ pr_emerg(" Bus Unit Error");
+
+ if (xec == 0x1)
+ pr_cont(" in the write data buffers.\n");
+ else if (xec == 0x3)
+ pr_cont(" in the victim data buffers.\n");
+ else if (xec == 0x2 && MEM_ERROR(ec))
+ pr_cont(": %s error in the L2 cache tags.\n", RRRR_MSG(ec));
+ else if (xec == 0x0) {
+ if (TLB_ERROR(ec))
+ pr_cont(": %s error in a Page Descriptor Cache or "
+ "Guest TLB.\n", TT_MSG(ec));
+ else if (BUS_ERROR(ec))
+ pr_cont(": %s/ECC error in data read from NB: %s.\n",
+ RRRR_MSG(ec), PP_MSG(ec));
+ else if (MEM_ERROR(ec)) {
+ u8 rrrr = (ec >> 4) & 0xf;
+
+ if (rrrr >= 0x7)
+ pr_cont(": %s error during data copyback.\n",
+ RRRR_MSG(ec));
+ else if (rrrr <= 0x1)
+ pr_cont(": %s parity/ECC error during data "
+ "access from L2.\n", RRRR_MSG(ec));
+ else
+ goto wrong_bu_mce;
+ } else
+ goto wrong_bu_mce;
+ } else
+ goto wrong_bu_mce;
+
+ return;
+
+wrong_bu_mce:
+ pr_warning("Corrupted BU MCE info?\n");
+}
+
+static void amd_decode_ls_mce(u64 mc3_status)
+{
+ u32 ec = mc3_status & 0xffff;
+ u32 xec = (mc3_status >> 16) & 0xf;
+
+ pr_emerg(" Load Store Error");
+
+ if (xec == 0x0) {
+ u8 rrrr = (ec >> 4) & 0xf;
+
+ if (!BUS_ERROR(ec) || (rrrr != 0x3 && rrrr != 0x4))
+ goto wrong_ls_mce;
+
+ pr_cont(" during %s.\n", RRRR_MSG(ec));
+ }
+ return;
+
+wrong_ls_mce:
+ pr_warning("Corrupted LS MCE info?\n");
+}
+
+void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
+{
+ u32 ec = ERROR_CODE(regs->nbsl);
+ u32 xec = EXT_ERROR_CODE(regs->nbsl);
+
+ if (!handle_errors)
+ return;
+
+ pr_emerg(" Northbridge Error, node %d", node_id);
+
+ /*
+ * F10h, revD can disable ErrCpu[3:0] so check that first and also the
+ * value encoding has changed so interpret those differently
+ */
+ if ((boot_cpu_data.x86 == 0x10) &&
+ (boot_cpu_data.x86_model > 8)) {
+ if (regs->nbsh & K8_NBSH_ERR_CPU_VAL)
+ pr_cont(", core: %u\n", (u8)(regs->nbsh & 0xf));
+ } else {
+ pr_cont(", core: %d\n", ilog2((regs->nbsh & 0xf)));
+ }
+
+
+ pr_emerg("%s.\n", EXT_ERR_MSG(xec));
+
+ if (BUS_ERROR(ec) && nb_bus_decoder)
+ nb_bus_decoder(node_id, regs);
+}
+EXPORT_SYMBOL_GPL(amd_decode_nb_mce);
+
+static void amd_decode_fr_mce(u64 mc5_status)
+{
+ /* we have only one error signature so match all fields at once. */
+ if ((mc5_status & 0xffff) == 0x0f0f)
+ pr_emerg(" FR Error: CPU Watchdog timer expire.\n");
+ else
+ pr_warning("Corrupted FR MCE info?\n");
+}
+
+static inline void amd_decode_err_code(unsigned int ec)
+{
+ if (TLB_ERROR(ec)) {
+ /*
+ * GART errors are intended to help graphics driver developers
+ * to detect bad GART PTEs. It is recommended by AMD to disable
+ * GART table walk error reporting by default[1] (currently
+ * being disabled in mce_cpu_quirks()) and according to the
+ * comment in mce_cpu_quirks(), such GART errors can be
+ * incorrectly triggered. We may see these errors anyway and
+ * unless requested by the user, they won't be reported.
+ *
+ * [1] section 13.10.1 on BIOS and Kernel Developers Guide for
+ * AMD NPT family 0Fh processors
+ */
+ if (!report_gart_errors)
+ return;
+
+ pr_emerg(" Transaction: %s, Cache Level %s\n",
+ TT_MSG(ec), LL_MSG(ec));
+ } else if (MEM_ERROR(ec)) {
+ pr_emerg(" Transaction: %s, Type: %s, Cache Level: %s",
+ RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec));
+ } else if (BUS_ERROR(ec)) {
+ pr_emerg(" Transaction type: %s(%s), %s, Cache Level: %s, "
+ "Participating Processor: %s\n",
+ RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec),
+ PP_MSG(ec));
+ } else
+ pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
+}
+
+void decode_mce(struct mce *m)
+{
+ struct err_regs regs;
+ int node, ecc;
+
+ pr_emerg("MC%d_STATUS: ", m->bank);
+
+ pr_cont("%sorrected error, report: %s, MiscV: %svalid, "
+ "CPU context corrupt: %s",
+ ((m->status & MCI_STATUS_UC) ? "Unc" : "C"),
+ ((m->status & MCI_STATUS_EN) ? "yes" : "no"),
+ ((m->status & MCI_STATUS_MISCV) ? "" : "in"),
+ ((m->status & MCI_STATUS_PCC) ? "yes" : "no"));
+
+ /* do the two bits[14:13] together */
+ ecc = m->status & (3ULL << 45);
+ if (ecc)
+ pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U"));
+
+ pr_cont("\n");
+
+ switch (m->bank) {
+ case 0:
+ amd_decode_dc_mce(m->status);
+ break;
+
+ case 1:
+ amd_decode_ic_mce(m->status);
+ break;
+
+ case 2:
+ amd_decode_bu_mce(m->status);
+ break;
+
+ case 3:
+ amd_decode_ls_mce(m->status);
+ break;
+
+ case 4:
+ regs.nbsl = (u32) m->status;
+ regs.nbsh = (u32)(m->status >> 32);
+ regs.nbeal = (u32) m->addr;
+ regs.nbeah = (u32)(m->addr >> 32);
+ node = per_cpu(cpu_llc_id, m->extcpu);
+
+ amd_decode_nb_mce(node, ®s, 1);
+ break;
+
+ case 5:
+ amd_decode_fr_mce(m->status);
+ break;
+
+ default:
+ break;
+ }
+
+ amd_decode_err_code(m->status & 0xffff);
+}
diff --git a/drivers/edac/edac_mce_amd.h b/drivers/edac/edac_mce_amd.h
new file mode 100644
index 0000000..df23ee0
--- /dev/null
+++ b/drivers/edac/edac_mce_amd.h
@@ -0,0 +1,69 @@
+#ifndef _EDAC_MCE_AMD_H
+#define _EDAC_MCE_AMD_H
+
+#include <asm/mce.h>
+
+#define ERROR_CODE(x) ((x) & 0xffff)
+#define EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f)
+#define EXT_ERR_MSG(x) ext_msgs[EXT_ERROR_CODE(x)]
+
+#define LOW_SYNDROME(x) (((x) >> 15) & 0xff)
+#define HIGH_SYNDROME(x) (((x) >> 24) & 0xff)
+
+#define TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010)
+#define MEM_ERROR(x) (((x) & 0xFF00) == 0x0100)
+#define BUS_ERROR(x) (((x) & 0xF800) == 0x0800)
+
+#define TT(x) (((x) >> 2) & 0x3)
+#define TT_MSG(x) tt_msgs[TT(x)]
+#define II(x) (((x) >> 2) & 0x3)
+#define II_MSG(x) ii_msgs[II(x)]
+#define LL(x) (((x) >> 0) & 0x3)
+#define LL_MSG(x) ll_msgs[LL(x)]
+#define RRRR(x) (((x) >> 4) & 0xf)
+#define RRRR_MSG(x) rrrr_msgs[RRRR(x)]
+#define TO(x) (((x) >> 8) & 0x1)
+#define TO_MSG(x) to_msgs[TO(x)]
+#define PP(x) (((x) >> 9) & 0x3)
+#define PP_MSG(x) pp_msgs[PP(x)]
+
+#define K8_NBSH 0x4C
+
+#define K8_NBSH_VALID_BIT BIT(31)
+#define K8_NBSH_OVERFLOW BIT(30)
+#define K8_NBSH_UC_ERR BIT(29)
+#define K8_NBSH_ERR_EN BIT(28)
+#define K8_NBSH_MISCV BIT(27)
+#define K8_NBSH_VALID_ERROR_ADDR BIT(26)
+#define K8_NBSH_PCC BIT(25)
+#define K8_NBSH_ERR_CPU_VAL BIT(24)
+#define K8_NBSH_CECC BIT(14)
+#define K8_NBSH_UECC BIT(13)
+#define K8_NBSH_ERR_SCRUBER BIT(8)
+
+extern const char *tt_msgs[];
+extern const char *ll_msgs[];
+extern const char *rrrr_msgs[];
+extern const char *pp_msgs[];
+extern const char *to_msgs[];
+extern const char *ii_msgs[];
+extern const char *ext_msgs[];
+
+/*
+ * relevant NB regs
+ */
+struct err_regs {
+ u32 nbcfg;
+ u32 nbsh;
+ u32 nbsl;
+ u32 nbeah;
+ u32 nbeal;
+};
+
+
+void amd_report_gart_errors(bool);
+void amd_register_ecc_decoder(void (*f)(int, struct err_regs *));
+void amd_unregister_ecc_decoder(void (*f)(int, struct err_regs *));
+void amd_decode_nb_mce(int, struct err_regs *, int);
+
+#endif /* _EDAC_MCE_AMD_H */
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 110e731..1c0b504 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -196,7 +196,7 @@
switch (fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
CSR_REGISTER_BASE + CSR_BANDWIDTH_AVAILABLE,
- data, sizeof(data))) {
+ data, 8)) {
case RCODE_GENERATION:
/* A generation change frees all bandwidth. */
return allocate ? -EAGAIN : bandwidth;
@@ -233,7 +233,7 @@
data[1] = old ^ c;
switch (fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
- offset, data, sizeof(data))) {
+ offset, data, 8)) {
case RCODE_GENERATION:
/* A generation change frees all channels. */
return allocate ? -EAGAIN : i;
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index a42209a..cbaf420 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -663,8 +663,6 @@
if (netif_queue_stopped(net))
netif_wake_queue(net);
- net->last_rx = jiffies;
-
return 0;
}
@@ -1188,7 +1186,7 @@
return 0;
}
-static int fwnet_tx(struct sk_buff *skb, struct net_device *net)
+static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
{
struct fwnet_header hdr_buf;
struct fwnet_device *dev = netdev_priv(net);
@@ -1342,7 +1340,7 @@
strcpy(info->bus_info, "ieee1394");
}
-static struct ethtool_ops fwnet_ethtool_ops = {
+static const struct ethtool_ops fwnet_ethtool_ops = {
.get_drvinfo = fwnet_get_drvinfo,
};
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index ecddd11..76b321b 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -34,6 +34,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/pci_ids.h>
#include <linux/spinlock.h>
#include <linux/string.h>
@@ -2372,6 +2373,9 @@
#define ohci_pmac_off(dev)
#endif /* CONFIG_PPC_PMAC */
+#define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT
+#define PCI_DEVICE_ID_AGERE_FW643 0x5901
+
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
@@ -2422,6 +2426,16 @@
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
+ /* dual-buffer mode is broken if more than one IR context is active */
+ if (dev->vendor == PCI_VENDOR_ID_AGERE &&
+ dev->device == PCI_DEVICE_ID_AGERE_FW643)
+ ohci->use_dualbuffer = false;
+
+ /* dual-buffer mode is broken */
+ if (dev->vendor == PCI_VENDOR_ID_RICOH &&
+ dev->device == PCI_DEVICE_ID_RICOH_R5C832)
+ ohci->use_dualbuffer = false;
+
/* x86-32 currently doesn't use highmem for dma_alloc_coherent */
#if !defined(CONFIG_X86_32)
/* dual-buffer mode is broken with descriptor addresses above 2G */
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 8d51568..e5df822 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -456,12 +456,12 @@
}
spin_unlock_irqrestore(&card->lock, flags);
- if (&orb->link != &lu->orb_list)
+ if (&orb->link != &lu->orb_list) {
orb->callback(orb, &status);
- else
+ kref_put(&orb->kref, free_orb);
+ } else {
fw_error("status write for unknown orb\n");
-
- kref_put(&orb->kref, free_orb);
+ }
fw_send_response(card, request, RCODE_COMPLETE);
}
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 24c84ae..938100f 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -568,35 +568,76 @@
EXPORT_SYMBOL(dmi_find_device);
/**
- * dmi_get_year - Return year of a DMI date
- * @field: data index (like dmi_get_system_info)
+ * dmi_get_date - parse a DMI date
+ * @field: data index (see enum dmi_field)
+ * @yearp: optional out parameter for the year
+ * @monthp: optional out parameter for the month
+ * @dayp: optional out parameter for the day
*
- * Returns -1 when the field doesn't exist. 0 when it is broken.
+ * The date field is assumed to be in the form resembling
+ * [mm[/dd]]/yy[yy] and the result is stored in the out
+ * parameters any or all of which can be omitted.
+ *
+ * If the field doesn't exist, all out parameters are set to zero
+ * and false is returned. Otherwise, true is returned with any
+ * invalid part of date set to zero.
+ *
+ * On return, year, month and day are guaranteed to be in the
+ * range of [0,9999], [0,12] and [0,31] respectively.
*/
-int dmi_get_year(int field)
+bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
{
- int year;
- const char *s = dmi_get_system_info(field);
+ int year = 0, month = 0, day = 0;
+ bool exists;
+ const char *s, *y;
+ char *e;
- if (!s)
- return -1;
- if (*s == '\0')
- return 0;
- s = strrchr(s, '/');
- if (!s)
- return 0;
+ s = dmi_get_system_info(field);
+ exists = s;
+ if (!exists)
+ goto out;
- s += 1;
- year = simple_strtoul(s, NULL, 0);
- if (year && year < 100) { /* 2-digit year */
+ /*
+ * Determine year first. We assume the date string resembles
+ * mm/dd/yy[yy] but the original code extracted only the year
+ * from the end. Keep the behavior in the spirit of no
+ * surprises.
+ */
+ y = strrchr(s, '/');
+ if (!y)
+ goto out;
+
+ y++;
+ year = simple_strtoul(y, &e, 10);
+ if (y != e && year < 100) { /* 2-digit year */
year += 1900;
if (year < 1996) /* no dates < spec 1.0 */
year += 100;
}
+ if (year > 9999) /* year should fit in %04d */
+ year = 0;
- return year;
+ /* parse the mm and dd */
+ month = simple_strtoul(s, &e, 10);
+ if (s == e || *e != '/' || !month || month > 12) {
+ month = 0;
+ goto out;
+ }
+
+ s = e + 1;
+ day = simple_strtoul(s, &e, 10);
+ if (s == y || s == e || *e != '/' || day > 31)
+ day = 0;
+out:
+ if (yearp)
+ *yearp = year;
+ if (monthp)
+ *monthp = month;
+ if (dayp)
+ *dayp = day;
+ return exists;
}
-EXPORT_SYMBOL(dmi_get_year);
+EXPORT_SYMBOL(dmi_get_date);
/**
* dmi_walk - Walk the DMI table and get called back for every record
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7537f57..5b4f87e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -222,6 +222,7 @@
unsigned int edp_support:1;
int lvds_ssc_freq;
+ int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
@@ -384,6 +385,9 @@
*/
struct list_head inactive_list;
+ /** LRU list of objects with fence regs on them. */
+ struct list_head fence_list;
+
/**
* List of breadcrumbs associated with GPU requests currently
* outstanding.
@@ -451,6 +455,9 @@
/** This object's place on the active/flushing/inactive lists */
struct list_head list;
+ /** This object's place on the fenced object LRU */
+ struct list_head fence_list;
+
/**
* This is set if the object is on the active or flushing lists
* (has pending rendering), and is not set if it's on inactive (ready
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 140bee1..80e5ba4 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -978,6 +978,7 @@
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
uint32_t read_domains = args->read_domains;
@@ -1010,8 +1011,18 @@
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+ /* Update the LRU on the fence for the CPU access that's
+ * about to occur.
+ */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list,
+ &dev_priv->mm.fence_list);
+ }
+
/* Silently promote "you're not bound, there was nothing to do"
* to success, since the client was just asking us to
* make sure everything was done.
@@ -1155,8 +1166,7 @@
}
/* Need a new fence register? */
- if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret) {
mutex_unlock(&dev->struct_mutex);
@@ -2208,6 +2218,12 @@
struct drm_i915_gem_object *old_obj_priv = NULL;
int i, ret, avail;
+ /* Just update our place in the LRU if our fence is getting used. */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+ return 0;
+ }
+
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
WARN(1, "allocating a fence for non-tiled object?\n");
@@ -2229,7 +2245,6 @@
}
/* First try to find a free reg */
-try_again:
avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
@@ -2243,63 +2258,62 @@
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- uint32_t seqno = dev_priv->mm.next_gem_seqno;
+ struct drm_gem_object *old_obj = NULL;
if (avail == 0)
return -ENOSPC;
- for (i = dev_priv->fence_reg_start;
- i < dev_priv->num_fence_regs; i++) {
- uint32_t this_seqno;
-
- reg = &dev_priv->fence_regs[i];
- old_obj_priv = reg->obj->driver_private;
+ list_for_each_entry(old_obj_priv, &dev_priv->mm.fence_list,
+ fence_list) {
+ old_obj = old_obj_priv->obj;
if (old_obj_priv->pin_count)
continue;
+ /* Take a reference, as otherwise the wait_rendering
+ * below may cause the object to get freed out from
+ * under us.
+ */
+ drm_gem_object_reference(old_obj);
+
/* i915 uses fences for GPU access to tiled buffers */
if (IS_I965G(dev) || !old_obj_priv->active)
break;
- /* find the seqno of the first available fence */
- this_seqno = old_obj_priv->last_rendering_seqno;
- if (this_seqno != 0 &&
- reg->obj->write_domain == 0 &&
- i915_seqno_passed(seqno, this_seqno))
- seqno = this_seqno;
- }
-
- /*
- * Now things get ugly... we have to wait for one of the
- * objects to finish before trying again.
- */
- if (i == dev_priv->num_fence_regs) {
- if (seqno == dev_priv->mm.next_gem_seqno) {
- i915_gem_flush(dev,
- I915_GEM_GPU_DOMAINS,
- I915_GEM_GPU_DOMAINS);
- seqno = i915_add_request(dev, NULL,
- I915_GEM_GPU_DOMAINS);
- if (seqno == 0)
- return -ENOMEM;
+ /* This brings the object to the head of the LRU if it
+ * had been written to. The only way this should
+ * result in us waiting longer than the expected
+ * optimal amount of time is if there was a
+ * fence-using buffer later that was read-only.
+ */
+ i915_gem_object_flush_gpu_write_domain(old_obj);
+ ret = i915_gem_object_wait_rendering(old_obj);
+ if (ret != 0) {
+ drm_gem_object_unreference(old_obj);
+ return ret;
}
- ret = i915_wait_request(dev, seqno);
- if (ret)
- return ret;
- goto try_again;
+ break;
}
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
*/
- i915_gem_release_mmap(reg->obj);
+ i915_gem_release_mmap(old_obj);
+
+ i = old_obj_priv->fence_reg;
+ reg = &dev_priv->fence_regs[i];
+
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&old_obj_priv->fence_list);
+
+ drm_gem_object_unreference(old_obj);
}
obj_priv->fence_reg = i;
+ list_add_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+
reg->obj = obj;
if (IS_I965G(dev))
@@ -2342,6 +2356,7 @@
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&obj_priv->fence_list);
}
/**
@@ -3595,9 +3610,7 @@
* Pre-965 chips need a fence register set up in order to
* properly handle tiled surfaces.
*/
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
@@ -3806,6 +3819,7 @@
obj_priv->obj = obj;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
+ INIT_LIST_HEAD(&obj_priv->fence_list);
return 0;
}
@@ -4218,15 +4232,11 @@
i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- int ret;
-
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
- ret = i915_gem_idle(dev);
drm_irq_uninstall(dev);
-
- return ret;
+ return i915_gem_idle(dev);
}
void
@@ -4253,6 +4263,7 @@
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
INIT_LIST_HEAD(&dev_priv->mm.request_list);
+ INIT_LIST_HEAD(&dev_priv->mm.fence_list);
INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
i915_gem_retire_work_handler);
dev_priv->mm.next_gem_seqno = 1;
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 300aee3..f806fcc 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -59,6 +59,16 @@
return NULL;
}
+static u16
+get_blocksize(void *p)
+{
+ u16 *block_ptr, block_size;
+
+ block_ptr = (u16 *)((char *)p - 2);
+ block_size = *block_ptr;
+ return block_size;
+}
+
static void
fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
struct lvds_dvo_timing *dvo_timing)
@@ -215,6 +225,41 @@
}
static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct bdb_general_definitions *general;
+ const int crt_bus_map_table[] = {
+ GPIOB,
+ GPIOA,
+ GPIOC,
+ GPIOD,
+ GPIOE,
+ GPIOF,
+ };
+
+ /* Set sensible defaults in case we can't find the general block
+ or it is the wrong chipset */
+ dev_priv->crt_ddc_bus = -1;
+
+ general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+ if (general) {
+ u16 block_size = get_blocksize(general);
+ if (block_size >= sizeof(*general)) {
+ int bus_pin = general->crt_ddc_gmbus_pin;
+ DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+ if ((bus_pin >= 1) && (bus_pin <= 6)) {
+ dev_priv->crt_ddc_bus =
+ crt_bus_map_table[bus_pin-1];
+ }
+ } else {
+ DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+ block_size);
+ }
+ }
+}
+
+static void
parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
@@ -222,7 +267,7 @@
struct bdb_general_definitions *p_defs;
struct child_device_config *p_child;
int i, child_device_num, count;
- u16 block_size, *block_ptr;
+ u16 block_size;
p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
if (!p_defs) {
@@ -240,8 +285,7 @@
return;
}
/* get the block size of general definitions */
- block_ptr = (u16 *)((char *)p_defs - 2);
- block_size = *block_ptr;
+ block_size = get_blocksize(p_defs);
/* get the number of child device */
child_device_num = (block_size - sizeof(*p_defs)) /
sizeof(*p_child);
@@ -362,6 +406,7 @@
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
+ parse_general_definitions(dev_priv, bdb);
parse_lfp_panel_data(dev_priv, bdb);
parse_sdvo_panel_data(dev_priv, bdb);
parse_sdvo_device_mapping(dev_priv, bdb);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 4cf8e2e..590f81c 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -508,6 +508,7 @@
{
struct drm_connector *connector;
struct intel_output *intel_output;
+ struct drm_i915_private *dev_priv = dev->dev_private;
u32 i2c_reg;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
@@ -527,8 +528,12 @@
/* Set up the DDC bus. */
if (IS_IGDNG(dev))
i2c_reg = PCH_GPIOA;
- else
+ else {
i2c_reg = GPIOA;
+ /* Use VBT information for CRT DDC if available */
+ if (dev_priv->crt_ddc_bus != -1)
+ i2c_reg = dev_priv->crt_ddc_bus;
+ }
intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
@@ -537,6 +542,10 @@
}
intel_output->type = INTEL_OUTPUT_ANALOG;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d6fce21..748ed50 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -666,7 +666,7 @@
intel_clock_t clock;
int err = target;
- if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
(I915_READ(LVDS)) != 0) {
/*
* For LVDS, if the panel is on, just rely on its current
@@ -2005,7 +2005,21 @@
return;
}
-const static int latency_ns = 3000; /* default for non-igd platforms */
+/*
+ * Latency for FIFO fetches is dependent on several factors:
+ * - memory configuration (speed, channels)
+ * - chipset
+ * - current MCH state
+ * It can be fairly high in some situations, so here we assume a fairly
+ * pessimal value. It's a tradeoff between extra memory fetches (if we
+ * set this value too high, the FIFO will fetch frequently to stay full)
+ * and power consumption (set it too low to save power and we might see
+ * FIFO underruns and display "flicker").
+ *
+ * A value of 5us seems to be a good balance; safe for very low end
+ * platforms but not overly aggressive on lower latency configs.
+ */
+const static int latency_ns = 5000;
static int intel_get_fifo_size(struct drm_device *dev, int plane)
{
@@ -2396,7 +2410,7 @@
if (is_sdvo) {
dpll |= DPLL_DVO_HIGH_SPEED;
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- if (IS_I945G(dev) || IS_I945GM(dev))
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
@@ -3170,7 +3184,7 @@
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
- if (type_mask & (1 << intel_output->type))
+ if (type_mask & intel_output->clone_mask)
index_mask |= (1 << entry);
entry++;
}
@@ -3218,30 +3232,30 @@
intel_dp_init(dev, PCH_DP_D);
} else if (IS_I9XX(dev)) {
- int found;
- u32 reg;
+ bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+
if (!found && SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (IS_G4X(dev))
- reg = SDVOC;
- else
- reg = SDVOB;
- if (I915_READ(reg) & SDVO_DETECTED) {
+ if (I915_READ(SDVOB) & SDVO_DETECTED)
found = intel_sdvo_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+
+ if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+ if (SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_C);
}
+
if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev, DP_D);
} else
@@ -3253,51 +3267,10 @@
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
struct drm_encoder *encoder = &intel_output->enc;
- int crtc_mask = 0, clone_mask = 0;
- /* valid crtcs */
- switch(intel_output->type) {
- case INTEL_OUTPUT_HDMI:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_HDMI));
- break;
- case INTEL_OUTPUT_DVO:
- case INTEL_OUTPUT_SDVO:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_ANALOG:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_LVDS:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_LVDS);
- break;
- case INTEL_OUTPUT_TVOUT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_TVOUT);
- break;
- case INTEL_OUTPUT_DISPLAYPORT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
- break;
- case INTEL_OUTPUT_EDP:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_EDP);
- break;
- }
- encoder->possible_crtcs = crtc_mask;
- encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+ encoder->possible_crtcs = intel_output->crtc_mask;
+ encoder->possible_clones = intel_connector_clones(dev,
+ intel_output->clone_mask);
}
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a6ff15a..2b914d7 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1254,6 +1254,18 @@
else
intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+ if (output_reg == DP_B)
+ intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+ else if (output_reg == DP_C)
+ intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+ else if (output_reg == DP_D)
+ intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+ if (IS_eDP(intel_output)) {
+ intel_output->crtc_mask = (1 << 1);
+ intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
+ } else
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d6f92ea..26a6227 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -57,6 +57,25 @@
#define INTEL_OUTPUT_DISPLAYPORT 7
#define INTEL_OUTPUT_EDP 8
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+#define INTEL_EDP_CLONE_BIT 17
+
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
@@ -86,6 +105,8 @@
bool needs_tv_clock;
void *dev_priv;
void (*hot_plug)(struct intel_output *);
+ int crtc_mask;
+ int clone_mask;
};
struct intel_crtc {
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 13bff209..a4d2606 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -435,14 +435,20 @@
continue;
intel_output->type = INTEL_OUTPUT_DVO;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_TMDS_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_LVDS_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 1842290..fa304e1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -230,22 +230,28 @@
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
/* Set up the DDC bus. */
- if (sdvox_reg == SDVOB)
+ if (sdvox_reg == SDVOB) {
+ intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
- else if (sdvox_reg == SDVOC)
+ } else if (sdvox_reg == SDVOC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
- else if (sdvox_reg == HDMIB)
+ } else if (sdvox_reg == HDMIB) {
+ intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
- else if (sdvox_reg == HDMIC)
+ } else if (sdvox_reg == HDMIC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
- else if (sdvox_reg == HDMID)
+ } else if (sdvox_reg == HDMID) {
+ intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
-
+ }
if (!intel_output->ddc_bus)
goto err_connector;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 3f445a8..8df02ef 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -916,6 +916,8 @@
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
intel_output->type = INTEL_OUTPUT_LVDS;
+ intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 1);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 5371d93..d3b74ba 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1458,7 +1458,7 @@
(SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
caps++;
if (sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0))
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
caps++;
if (sdvo_priv->caps.output_flags &
(SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
@@ -1967,6 +1967,9 @@
intel_sdvo_set_colorimetry(intel_output,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ intel_output->clone_mask =
+ (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
}
} else if (flags & SDVO_OUTPUT_SVID0) {
@@ -1975,11 +1978,14 @@
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
intel_output->needs_tv_clock = true;
+ intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
} else if (flags & SDVO_OUTPUT_RGB0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_RGB1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
@@ -1991,12 +1997,16 @@
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_LVDS1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else {
unsigned char bytes[2];
@@ -2009,6 +2019,7 @@
bytes[0], bytes[1]);
ret = false;
}
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
if (ret && registered)
ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index da4ab4d..5b1c9e9 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1718,6 +1718,7 @@
if (!intel_output) {
return;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
@@ -1729,6 +1730,8 @@
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
tv_priv = (struct intel_tv_priv *)(intel_output + 1);
intel_output->type = INTEL_OUTPUT_TVOUT;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
intel_output->dev_priv = tv_priv;
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 053f4ec..051bca6 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -995,7 +995,7 @@
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x0003FC01, 0xFFFFFFF8, 0xFE800B19,
+ 0x0003FC01, 0xFFFFFCF8, 0xFF800B19,
};
static int r300_packet0_check(struct radeon_cs_parser *p,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 7ca6c13..93d8f88 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -266,6 +266,7 @@
/*
* rs600.
*/
+int rs600_init(struct radeon_device *dev);
void rs600_errata(struct radeon_device *rdev);
void rs600_vram_info(struct radeon_device *rdev);
int rs600_mc_init(struct radeon_device *rdev);
@@ -281,7 +282,7 @@
void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rs600_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs600_asic = {
- .init = &r300_init,
+ .init = &rs600_init,
.errata = &rs600_errata,
.vram_info = &rs600_vram_info,
.gpu_reset = &r300_gpu_reset,
@@ -316,7 +317,6 @@
/*
* rs690,rs740
*/
-int rs690_init(struct radeon_device *rdev);
void rs690_errata(struct radeon_device *rdev);
void rs690_vram_info(struct radeon_device *rdev);
int rs690_mc_init(struct radeon_device *rdev);
@@ -325,7 +325,7 @@
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rs690_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs690_asic = {
- .init = &rs690_init,
+ .init = &rs600_init,
.errata = &rs690_errata,
.vram_info = &rs690_vram_info,
.gpu_reset = &r300_gpu_reset,
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index 14c1998..d880edf 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -274,12 +274,18 @@
}
robj = gobj->driver_private;
r = radeon_object_busy_domain(robj, &cur_placement);
- if (cur_placement == TTM_PL_VRAM)
+ switch (cur_placement) {
+ case TTM_PL_VRAM:
args->domain = RADEON_GEM_DOMAIN_VRAM;
- if (cur_placement == TTM_PL_FLAG_TT)
+ break;
+ case TTM_PL_TT:
args->domain = RADEON_GEM_DOMAIN_GTT;
- if (cur_placement == TTM_PL_FLAG_SYSTEM)
+ break;
+ case TTM_PL_SYSTEM:
args->domain = RADEON_GEM_DOMAIN_CPU;
+ default:
+ break;
+ }
mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(gobj);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 7e8ce98..02fd11a 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -409,3 +409,68 @@
((reg) & RS600_MC_ADDR_MASK));
WREG32(RS600_MC_DATA, v);
}
+
+static const unsigned rs600_reg_safe_bm[219] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x17FF1FFF, 0xFFFFFFFC, 0xFFFFFFFF, 0xFF30FFBF,
+ 0xFFFFFFF8, 0xC3E6FFFF, 0xFFFFF6DF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFF03F,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFEFCE, 0xF00EBFFF, 0x007C0000,
+ 0xF0000078, 0xFF000009, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFF7FF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFC78, 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFF,
+ 0x38FF8F50, 0xFFF88082, 0xF000000C, 0xFAE009FF,
+ 0x0000FFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000,
+ 0x00000000, 0x0000C100, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0xFFFF0000, 0xFFFFFFFF, 0xFF80FFFF,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x0003FC01, 0xFFFFFCF8, 0xFF800B19, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+};
+
+int rs600_init(struct radeon_device *rdev)
+{
+ rdev->config.r300.reg_safe_bm = rs600_reg_safe_bm;
+ rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs600_reg_safe_bm);
+ return 0;
+}
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index bc6b7c5..8798825 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -653,67 +653,3 @@
WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
}
-static const unsigned rs690_reg_safe_bm[219] = {
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0x17FF1FFF,0xFFFFFFFC,0xFFFFFFFF,0xFF30FFBF,
- 0xFFFFFFF8,0xC3E6FFFF,0xFFFFF6DF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFF03F,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFEFCE,0xF00EBFFF,0x007C0000,
- 0xF0000078,0xFF000009,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFF7FF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFC78,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF,
- 0x38FF8F50,0xFFF88082,0xF000000C,0xFAE009FF,
- 0x0000FFFF,0xFFFFFFFF,0xFFFFFFFF,0x00000000,
- 0x00000000,0x0000C100,0x00000000,0x00000000,
- 0x00000000,0x00000000,0x00000000,0x00000000,
- 0x00000000,0xFFFF0000,0xFFFFFFFF,0xFF80FFFF,
- 0x00000000,0x00000000,0x00000000,0x00000000,
- 0x0003FC01,0xFFFFFFF8,0xFE800B19,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
- 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
-};
-
-int rs690_init(struct radeon_device *rdev)
-{
- rdev->config.r300.reg_safe_bm = rs690_reg_safe_bm;
- rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs690_reg_safe_bm);
- return 0;
-}
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 31a7f66..0566fb6 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -508,7 +508,7 @@
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x0003FC01, 0x3FFFFCF8, 0xFE800B19, 0xFFFFFFFF,
+ 0x0003FC01, 0x3FFFFCF8, 0xFF800B19, 0xFFDFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2d50166..2e25b7a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -702,6 +702,23 @@
This driver can also be built as a module. If so, the module
will be called sht15.
+config SENSORS_S3C
+ tristate "S3C24XX/S3C64XX Inbuilt ADC"
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
+ help
+ If you say yes here you get support for the on-board ADCs of
+ the Samsung S3C24XX or S3C64XX series of SoC
+
+ This driver can also be built as a module. If so, the module
+ will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+ bool "Include raw channel attributes in sysfs"
+ depends on SENSORS_S3C
+ help
+ Say Y here if you want to include raw copies of all the ADC
+ channels in sysfs.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b793dce..7f239a2 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
new file mode 100644
index 0000000..3a524f2
--- /dev/null
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -0,0 +1,405 @@
+/* linux/drivers/hwmon/s3c-hwmon.c
+ *
+ * Copyright (C) 2005, 2008, 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX/S3C64XX ADC hwmon support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <plat/adc.h>
+#include <plat/hwmon.h>
+
+struct s3c_hwmon_attr {
+ struct sensor_device_attribute in;
+ struct sensor_device_attribute label;
+ char in_name[12];
+ char label_name[12];
+};
+
+/**
+ * struct s3c_hwmon - ADC hwmon client information
+ * @lock: Access lock to serialise the conversions.
+ * @client: The client we registered with the S3C ADC core.
+ * @hwmon_dev: The hwmon device we created.
+ * @attr: The holders for the channel attributes.
+*/
+struct s3c_hwmon {
+ struct semaphore lock;
+ struct s3c_adc_client *client;
+ struct device *hwmon_dev;
+
+ struct s3c_hwmon_attr attrs[8];
+};
+
+/**
+ * s3c_hwmon_read_ch - read a value from a given adc channel.
+ * @dev: The device.
+ * @hwmon: Our state.
+ * @channel: The channel we're reading from.
+ *
+ * Read a value from the @channel with the proper locking and sleep until
+ * either the read completes or we timeout awaiting the ADC core to get
+ * back to us.
+ */
+static int s3c_hwmon_read_ch(struct device *dev,
+ struct s3c_hwmon *hwmon, int channel)
+{
+ int ret;
+
+ ret = down_interruptible(&hwmon->lock);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dev, "reading channel %d\n", channel);
+
+ ret = s3c_adc_read(hwmon->client, channel);
+ up(&hwmon->lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_SENSORS_S3C_RAW
+/**
+ * s3c_hwmon_show_raw - show a conversion from the raw channel number.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * This show deals with the raw attribute, registered for each possible
+ * ADC channel. This does a conversion and returns the raw (un-scaled)
+ * value returned from the hardware.
+ */
+static ssize_t s3c_hwmon_show_raw(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev));
+ struct sensor_device_attribute *sa = to_sensor_dev_attr(attr);
+ int ret;
+
+ ret = s3c_hwmon_read_ch(dev, adc, sa->index);
+
+ return (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+#define DEF_ADC_ATTR(x) \
+ static SENSOR_DEVICE_ATTR(adc##x##_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, x)
+
+DEF_ADC_ATTR(0);
+DEF_ADC_ATTR(1);
+DEF_ADC_ATTR(2);
+DEF_ADC_ATTR(3);
+DEF_ADC_ATTR(4);
+DEF_ADC_ATTR(5);
+DEF_ADC_ATTR(6);
+DEF_ADC_ATTR(7);
+
+static struct attribute *s3c_hwmon_attrs[9] = {
+ &sensor_dev_attr_adc0_raw.dev_attr.attr,
+ &sensor_dev_attr_adc1_raw.dev_attr.attr,
+ &sensor_dev_attr_adc2_raw.dev_attr.attr,
+ &sensor_dev_attr_adc3_raw.dev_attr.attr,
+ &sensor_dev_attr_adc4_raw.dev_attr.attr,
+ &sensor_dev_attr_adc5_raw.dev_attr.attr,
+ &sensor_dev_attr_adc6_raw.dev_attr.attr,
+ &sensor_dev_attr_adc7_raw.dev_attr.attr,
+ NULL,
+};
+
+static struct attribute_group s3c_hwmon_attrgroup = {
+ .attrs = s3c_hwmon_attrs,
+};
+
+static inline int s3c_hwmon_add_raw(struct device *dev)
+{
+ return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+static inline void s3c_hwmon_remove_raw(struct device *dev)
+{
+ sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+#else
+
+static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; }
+static inline void s3c_hwmon_remove_raw(struct device *dev) { }
+
+#endif /* CONFIG_SENSORS_S3C_RAW */
+
+/**
+ * s3c_hwmon_ch_show - show value of a given channel
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Read a value from the ADC and scale it before returning it to the
+ * caller. The scale factor is gained from the channel configuration
+ * passed via the platform data when the device was registered.
+ */
+static ssize_t s3c_hwmon_ch_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+ struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev));
+ struct s3c_hwmon_pdata *pdata = dev->platform_data;
+ struct s3c_hwmon_chcfg *cfg;
+ int ret;
+
+ cfg = pdata->in[sen_attr->index];
+
+ ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index);
+ if (ret < 0)
+ return ret;
+
+ ret *= cfg->mult;
+ ret = DIV_ROUND_CLOSEST(ret, cfg->div);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+/**
+ * s3c_hwmon_label_show - show label name of the given channel.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Return the label name of a given channel
+ */
+static ssize_t s3c_hwmon_label_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+ struct s3c_hwmon_pdata *pdata = dev->platform_data;
+ struct s3c_hwmon_chcfg *cfg;
+
+ cfg = pdata->in[sen_attr->index];
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name);
+}
+
+/**
+ * s3c_hwmon_create_attr - create hwmon attribute for given channel.
+ * @dev: The device to create the attribute on.
+ * @cfg: The channel configuration passed from the platform data.
+ * @channel: The ADC channel number to process.
+ *
+ * Create the scaled attribute for use with hwmon from the specified
+ * platform data in @pdata. The sysfs entry is handled by the routine
+ * s3c_hwmon_ch_show().
+ *
+ * The attribute name is taken from the configuration data if present
+ * otherwise the name is taken by concatenating in_ with the channel
+ * number.
+ */
+static int s3c_hwmon_create_attr(struct device *dev,
+ struct s3c_hwmon_chcfg *cfg,
+ struct s3c_hwmon_attr *attrs,
+ int channel)
+{
+ struct sensor_device_attribute *attr;
+ int ret;
+
+ snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel);
+
+ attr = &attrs->in;
+ attr->index = channel;
+ attr->dev_attr.attr.name = attrs->in_name;
+ attr->dev_attr.attr.mode = S_IRUGO;
+ attr->dev_attr.attr.owner = THIS_MODULE;
+ attr->dev_attr.show = s3c_hwmon_ch_show;
+
+ ret = device_create_file(dev, &attr->dev_attr);
+ if (ret < 0) {
+ dev_err(dev, "failed to create input attribute\n");
+ return ret;
+ }
+
+ /* if this has a name, add a label */
+ if (cfg->name) {
+ snprintf(attrs->label_name, sizeof(attrs->label_name),
+ "in%d_label", channel);
+
+ attr = &attrs->label;
+ attr->index = channel;
+ attr->dev_attr.attr.name = attrs->label_name;
+ attr->dev_attr.attr.mode = S_IRUGO;
+ attr->dev_attr.attr.owner = THIS_MODULE;
+ attr->dev_attr.show = s3c_hwmon_label_show;
+
+ ret = device_create_file(dev, &attr->dev_attr);
+ if (ret < 0) {
+ device_remove_file(dev, &attrs->in.dev_attr);
+ dev_err(dev, "failed to create label attribute\n");
+ }
+ }
+
+ return ret;
+}
+
+static void s3c_hwmon_remove_attr(struct device *dev,
+ struct s3c_hwmon_attr *attrs)
+{
+ device_remove_file(dev, &attrs->in.dev_attr);
+ device_remove_file(dev, &attrs->label.dev_attr);
+}
+
+/**
+ * s3c_hwmon_probe - device probe entry.
+ * @dev: The device being probed.
+*/
+static int __devinit s3c_hwmon_probe(struct platform_device *dev)
+{
+ struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
+ struct s3c_hwmon *hwmon;
+ int ret = 0;
+ int i;
+
+ if (!pdata) {
+ dev_err(&dev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ hwmon = kzalloc(sizeof(struct s3c_hwmon), GFP_KERNEL);
+ if (hwmon == NULL) {
+ dev_err(&dev->dev, "no memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(dev, hwmon);
+
+ init_MUTEX(&hwmon->lock);
+
+ /* Register with the core ADC driver. */
+
+ hwmon->client = s3c_adc_register(dev, NULL, NULL, 0);
+ if (IS_ERR(hwmon->client)) {
+ dev_err(&dev->dev, "cannot register adc\n");
+ ret = PTR_ERR(hwmon->client);
+ goto err_mem;
+ }
+
+ /* add attributes for our adc devices. */
+
+ ret = s3c_hwmon_add_raw(&dev->dev);
+ if (ret)
+ goto err_registered;
+
+ /* register with the hwmon core */
+
+ hwmon->hwmon_dev = hwmon_device_register(&dev->dev);
+ if (IS_ERR(hwmon->hwmon_dev)) {
+ dev_err(&dev->dev, "error registering with hwmon\n");
+ ret = PTR_ERR(hwmon->hwmon_dev);
+ goto err_raw_attribute;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
+ if (!pdata->in[i])
+ continue;
+
+ if (pdata->in[i]->mult >= 0x10000)
+ dev_warn(&dev->dev,
+ "channel %d multiplier too large\n",
+ i);
+
+ ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
+ &hwmon->attrs[i], i);
+ if (ret) {
+ dev_err(&dev->dev,
+ "error creating channel %d\n", i);
+
+ for (i--; i >= 0; i--)
+ s3c_hwmon_remove_attr(&dev->dev,
+ &hwmon->attrs[i]);
+
+ goto err_hwmon_register;
+ }
+ }
+
+ return 0;
+
+ err_hwmon_register:
+ hwmon_device_unregister(hwmon->hwmon_dev);
+
+ err_raw_attribute:
+ s3c_hwmon_remove_raw(&dev->dev);
+
+ err_registered:
+ s3c_adc_release(hwmon->client);
+
+ err_mem:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit s3c_hwmon_remove(struct platform_device *dev)
+{
+ struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
+ int i;
+
+ s3c_hwmon_remove_raw(&dev->dev);
+
+ for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++)
+ s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]);
+
+ hwmon_device_unregister(hwmon->hwmon_dev);
+ s3c_adc_release(hwmon->client);
+
+ return 0;
+}
+
+static struct platform_driver s3c_hwmon_driver = {
+ .driver = {
+ .name = "s3c-hwmon",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c_hwmon_probe,
+ .remove = __devexit_p(s3c_hwmon_remove),
+};
+
+static int __init s3c_hwmon_init(void)
+{
+ return platform_driver_register(&s3c_hwmon_driver);
+}
+
+static void __exit s3c_hwmon_exit(void)
+{
+ platform_driver_unregister(&s3c_hwmon_driver);
+}
+
+module_init(s3c_hwmon_init);
+module_exit(s3c_hwmon_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C ADC HWMon driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-hwmon");
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index 923cbfe..6396c3a 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -177,6 +177,7 @@
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 527908f..063b933 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -408,6 +408,7 @@
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index f5c586c..a4e9dcb 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -169,10 +169,11 @@
static void ether1394_header_cache_update(struct hh_cache *hh,
const struct net_device *dev,
const unsigned char *haddr);
-static int ether1394_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ether1394_tx(struct sk_buff *skb,
+ struct net_device *dev);
static void ether1394_iso(struct hpsb_iso *iso);
-static struct ethtool_ops ethtool_ops;
+static const struct ethtool_ops ethtool_ops;
static int ether1394_write(struct hpsb_host *host, int srcid, int destid,
quadlet_t *data, u64 addr, size_t len, u16 flags);
@@ -1300,7 +1301,6 @@
hpsb_iso_recv_release_packets(iso, i);
- dev->last_rx = jiffies;
}
/******************************************
@@ -1555,7 +1555,8 @@
}
/* Transmit a packet (called by kernel) */
-static int ether1394_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ether1394_tx(struct sk_buff *skb,
+ struct net_device *dev)
{
struct eth1394hdr hdr_buf;
struct eth1394_priv *priv = netdev_priv(dev);
@@ -1694,14 +1695,6 @@
dev->stats.tx_errors++;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * FIXME: According to a patch from 2003-02-26, "returning non-zero
- * causes serious problems" here, allegedly. Before that patch,
- * -ERRNO was returned which is not appropriate under Linux 2.6.
- * Perhaps more needs to be done? Stop the queue in serious
- * conditions and restart it elsewhere?
- */
- /* return NETDEV_TX_BUSY; */
return NETDEV_TX_OK;
}
@@ -1712,7 +1705,7 @@
strcpy(info->bus_info, "ieee1394"); /* FIXME provide more detail? */
}
-static struct ethtool_ops ethtool_ops = {
+static const struct ethtool_ops ethtool_ops = {
.get_drvinfo = ether1394_get_drvinfo
};
diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index 0384144..96a2959 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -26,11 +26,23 @@
#include <linux/skbuff.h>
#include <linux/if_arp.h>
-#include <net/ieee802154/af_ieee802154.h>
-#include <net/ieee802154/netdevice.h>
-#include <net/ieee802154/mac_def.h>
-#include <net/ieee802154/nl802154.h>
+#include <net/af_ieee802154.h>
+#include <net/ieee802154_netdev.h>
+#include <net/ieee802154.h>
+#include <net/nl802154.h>
+#include <net/wpan-phy.h>
+struct wpan_phy *net_to_phy(struct net_device *dev)
+{
+ return container_of(dev->dev.parent, struct wpan_phy, dev);
+}
+
+/**
+ * fake_get_pan_id - Retrieve the PAN ID of the device.
+ * @dev: The network device to retrieve the PAN of.
+ *
+ * Return the ID of the PAN from the PIB.
+ */
static u16 fake_get_pan_id(struct net_device *dev)
{
BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -38,6 +50,14 @@
return 0xeba1;
}
+/**
+ * fake_get_short_addr - Retrieve the short address of the device.
+ * @dev: The network device to retrieve the short address of.
+ *
+ * Returns the IEEE 802.15.4 short-form address cached for this
+ * device. If the device has not yet had a short address assigned
+ * then this should return 0xFFFF to indicate a lack of association.
+ */
static u16 fake_get_short_addr(struct net_device *dev)
{
BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -45,6 +65,19 @@
return 0x1;
}
+/**
+ * fake_get_dsn - Retrieve the DSN of the device.
+ * @dev: The network device to retrieve the DSN for.
+ *
+ * Returns the IEEE 802.15.4 DSN for the network device.
+ * The DSN is the sequence number which will be added to each
+ * packet or MAC command frame by the MAC during transmission.
+ *
+ * DSN means 'Data Sequence Number'.
+ *
+ * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
+ * document.
+ */
static u8 fake_get_dsn(struct net_device *dev)
{
BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -52,6 +85,19 @@
return 0x00; /* DSN are implemented in HW, so return just 0 */
}
+/**
+ * fake_get_bsn - Retrieve the BSN of the device.
+ * @dev: The network device to retrieve the BSN for.
+ *
+ * Returns the IEEE 802.15.4 BSN for the network device.
+ * The BSN is the sequence number which will be added to each
+ * beacon frame sent by the MAC.
+ *
+ * BSN means 'Beacon Sequence Number'.
+ *
+ * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
+ * document.
+ */
static u8 fake_get_bsn(struct net_device *dev)
{
BUG_ON(dev->type != ARPHRD_IEEE802154);
@@ -59,40 +105,130 @@
return 0x00; /* BSN are implemented in HW, so return just 0 */
}
+/**
+ * fake_assoc_req - Make an association request to the HW.
+ * @dev: The network device which we are associating to a network.
+ * @addr: The coordinator with which we wish to associate.
+ * @channel: The channel on which to associate.
+ * @cap: The capability information field to use in the association.
+ *
+ * Start an association with a coordinator. The coordinator's address
+ * and PAN ID can be found in @addr.
+ *
+ * Note: This is in section 7.3.1 and 7.5.3.1 of the IEEE
+ * 802.15.4-2006 document.
+ */
static int fake_assoc_req(struct net_device *dev,
- struct ieee802154_addr *addr, u8 channel, u8 cap)
+ struct ieee802154_addr *addr, u8 channel, u8 page, u8 cap)
{
+ struct wpan_phy *phy = net_to_phy(dev);
+
+ mutex_lock(&phy->pib_lock);
+ phy->current_channel = channel;
+ phy->current_page = page;
+ mutex_unlock(&phy->pib_lock);
+
/* We simply emulate it here */
return ieee802154_nl_assoc_confirm(dev, fake_get_short_addr(dev),
IEEE802154_SUCCESS);
}
+/**
+ * fake_assoc_resp - Send an association response to a device.
+ * @dev: The network device on which to send the response.
+ * @addr: The address of the device to respond to.
+ * @short_addr: The assigned short address for the device (if any).
+ * @status: The result of the association request.
+ *
+ * Queue the association response of the coordinator to another
+ * device's attempt to associate with the network which we
+ * coordinate. This is then added to the indirect-send queue to be
+ * transmitted to the end device when it polls for data.
+ *
+ * Note: This is in section 7.3.2 and 7.5.3.1 of the IEEE
+ * 802.15.4-2006 document.
+ */
static int fake_assoc_resp(struct net_device *dev,
struct ieee802154_addr *addr, u16 short_addr, u8 status)
{
return 0;
}
+/**
+ * fake_disassoc_req - Disassociate a device from a network.
+ * @dev: The network device on which we're disassociating a device.
+ * @addr: The device to disassociate from the network.
+ * @reason: The reason to give to the device for being disassociated.
+ *
+ * This sends a disassociation notification to the device being
+ * disassociated from the network.
+ *
+ * Note: This is in section 7.5.3.2 of the IEEE 802.15.4-2006
+ * document, with the reason described in 7.3.3.2.
+ */
static int fake_disassoc_req(struct net_device *dev,
struct ieee802154_addr *addr, u8 reason)
{
return ieee802154_nl_disassoc_confirm(dev, IEEE802154_SUCCESS);
}
+/**
+ * fake_start_req - Start an IEEE 802.15.4 PAN.
+ * @dev: The network device on which to start the PAN.
+ * @addr: The coordinator address to use when starting the PAN.
+ * @channel: The channel on which to start the PAN.
+ * @bcn_ord: Beacon order.
+ * @sf_ord: Superframe order.
+ * @pan_coord: Whether or not we are the PAN coordinator or just
+ * requesting a realignment perhaps?
+ * @blx: Battery Life Extension feature bitfield.
+ * @coord_realign: Something to realign something else.
+ *
+ * If pan_coord is non-zero then this starts a network with the
+ * provided parameters, otherwise it attempts a coordinator
+ * realignment of the stated network instead.
+ *
+ * Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006
+ * document, with 7.3.8 describing coordinator realignment.
+ */
static int fake_start_req(struct net_device *dev, struct ieee802154_addr *addr,
- u8 channel,
+ u8 channel, u8 page,
u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
u8 coord_realign)
{
+ struct wpan_phy *phy = net_to_phy(dev);
+
+ mutex_lock(&phy->pib_lock);
+ phy->current_channel = channel;
+ phy->current_page = page;
+ mutex_unlock(&phy->pib_lock);
+
+ /* We don't emulate beacons here at all, so START should fail */
+ ieee802154_nl_start_confirm(dev, IEEE802154_INVALID_PARAMETER);
return 0;
}
+/**
+ * fake_scan_req - Start a channel scan.
+ * @dev: The network device on which to perform a channel scan.
+ * @type: The type of scan to perform.
+ * @channels: The channel bitmask to scan.
+ * @duration: How long to spend on each channel.
+ *
+ * This starts either a passive (energy) scan or an active (PAN) scan
+ * on the channels indicated in the @channels bitmask. The duration of
+ * the scan is measured in terms of superframe duration. Specifically,
+ * the scan will spend aBaseSuperFrameDuration * ((2^n) + 1) on each
+ * channel.
+ *
+ * Note: This is in section 7.5.2.1 of the IEEE 802.15.4-2006 document.
+ */
static int fake_scan_req(struct net_device *dev, u8 type, u32 channels,
- u8 duration)
+ u8 page, u8 duration)
{
u8 edl[27] = {};
return ieee802154_nl_scan_confirm(dev, IEEE802154_SUCCESS, type,
- channels,
+ channels, page,
type == IEEE802154_MAC_SCAN_ED ? edl : NULL);
}
@@ -121,7 +257,8 @@
return 0;
}
-static int ieee802154_fake_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
skb->iif = dev->ifindex;
skb->dev = dev;
@@ -132,7 +269,7 @@
/* FIXME: do hardware work here ... */
- return 0;
+ return NETDEV_TX_OK;
}
@@ -174,6 +311,14 @@
.ndo_set_mac_address = ieee802154_fake_mac_addr,
};
+static void ieee802154_fake_destruct(struct net_device *dev)
+{
+ struct wpan_phy *phy = net_to_phy(dev);
+
+ wpan_phy_unregister(phy);
+ free_netdev(dev);
+ wpan_phy_free(phy);
+}
static void ieee802154_fake_setup(struct net_device *dev)
{
@@ -186,22 +331,34 @@
dev->type = ARPHRD_IEEE802154;
dev->flags = IFF_NOARP | IFF_BROADCAST;
dev->watchdog_timeo = 0;
+ dev->destructor = ieee802154_fake_destruct;
}
static int __devinit ieee802154fake_probe(struct platform_device *pdev)
{
- struct net_device *dev =
- alloc_netdev(0, "hardwpan%d", ieee802154_fake_setup);
+ struct net_device *dev;
+ struct wpan_phy *phy = wpan_phy_alloc(0);
int err;
- if (!dev)
+ if (!phy)
return -ENOMEM;
+ dev = alloc_netdev(0, "hardwpan%d", ieee802154_fake_setup);
+ if (!dev) {
+ wpan_phy_free(phy);
+ return -ENOMEM;
+ }
+
+ phy->dev.platform_data = dev;
+
memcpy(dev->dev_addr, "\xba\xbe\xca\xfe\xde\xad\xbe\xef",
dev->addr_len);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+ phy->channels_supported = (1 << 27) - 1;
+ phy->transmit_power = 0xbf;
+
dev->netdev_ops = &fake_ops;
dev->ml_priv = &fake_mlme;
@@ -215,15 +372,18 @@
goto out;
}
- SET_NETDEV_DEV(dev, &pdev->dev);
+ SET_NETDEV_DEV(dev, &phy->dev);
platform_set_drvdata(pdev, dev);
+ err = wpan_phy_register(&pdev->dev, phy);
+ if (err)
+ goto out;
+
err = register_netdev(dev);
if (err < 0)
goto out;
-
dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
return 0;
@@ -236,7 +396,6 @@
{
struct net_device *dev = platform_get_drvdata(pdev);
unregister_netdev(dev);
- free_netdev(dev);
return 0;
}
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 8f9509e..55d093a 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -362,6 +362,7 @@
* In either case, must tell the provider to reject.
*/
cm_id_priv->state = IW_CM_STATE_DESTROYING;
+ cm_id->device->iwcm->reject(cm_id, NULL, 0);
break;
case IW_CM_STATE_CONN_SENT:
case IW_CM_STATE_DESTROYING:
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index de922a0..7522008 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -2,6 +2,7 @@
* Copyright (c) 2004-2007 Voltaire, Inc. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Mellanox Technologies Ltd. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -45,14 +46,21 @@
MODULE_AUTHOR("Hal Rosenstock");
MODULE_AUTHOR("Sean Hefty");
+int mad_sendq_size = IB_MAD_QP_SEND_SIZE;
+int mad_recvq_size = IB_MAD_QP_RECV_SIZE;
+
+module_param_named(send_queue_size, mad_sendq_size, int, 0444);
+MODULE_PARM_DESC(send_queue_size, "Size of send queue in number of work requests");
+module_param_named(recv_queue_size, mad_recvq_size, int, 0444);
+MODULE_PARM_DESC(recv_queue_size, "Size of receive queue in number of work requests");
+
static struct kmem_cache *ib_mad_cache;
static struct list_head ib_mad_port_list;
static u32 ib_mad_client_id = 0;
/* Port list lock */
-static spinlock_t ib_mad_port_list_lock;
-
+static DEFINE_SPINLOCK(ib_mad_port_list_lock);
/* Forward declarations */
static int method_in_use(struct ib_mad_mgmt_method_table **method,
@@ -1974,7 +1982,7 @@
unsigned long delay;
if (list_empty(&mad_agent_priv->wait_list)) {
- cancel_delayed_work(&mad_agent_priv->timed_work);
+ __cancel_delayed_work(&mad_agent_priv->timed_work);
} else {
mad_send_wr = list_entry(mad_agent_priv->wait_list.next,
struct ib_mad_send_wr_private,
@@ -1983,7 +1991,7 @@
if (time_after(mad_agent_priv->timeout,
mad_send_wr->timeout)) {
mad_agent_priv->timeout = mad_send_wr->timeout;
- cancel_delayed_work(&mad_agent_priv->timed_work);
+ __cancel_delayed_work(&mad_agent_priv->timed_work);
delay = mad_send_wr->timeout - jiffies;
if ((long)delay <= 0)
delay = 1;
@@ -2023,7 +2031,7 @@
/* Reschedule a work item if we have a shorter timeout */
if (mad_agent_priv->wait_list.next == &mad_send_wr->agent_list) {
- cancel_delayed_work(&mad_agent_priv->timed_work);
+ __cancel_delayed_work(&mad_agent_priv->timed_work);
queue_delayed_work(mad_agent_priv->qp_info->port_priv->wq,
&mad_agent_priv->timed_work, delay);
}
@@ -2736,8 +2744,8 @@
qp_init_attr.send_cq = qp_info->port_priv->cq;
qp_init_attr.recv_cq = qp_info->port_priv->cq;
qp_init_attr.sq_sig_type = IB_SIGNAL_ALL_WR;
- qp_init_attr.cap.max_send_wr = IB_MAD_QP_SEND_SIZE;
- qp_init_attr.cap.max_recv_wr = IB_MAD_QP_RECV_SIZE;
+ qp_init_attr.cap.max_send_wr = mad_sendq_size;
+ qp_init_attr.cap.max_recv_wr = mad_recvq_size;
qp_init_attr.cap.max_send_sge = IB_MAD_SEND_REQ_MAX_SG;
qp_init_attr.cap.max_recv_sge = IB_MAD_RECV_REQ_MAX_SG;
qp_init_attr.qp_type = qp_type;
@@ -2752,8 +2760,8 @@
goto error;
}
/* Use minimum queue sizes unless the CQ is resized */
- qp_info->send_queue.max_active = IB_MAD_QP_SEND_SIZE;
- qp_info->recv_queue.max_active = IB_MAD_QP_RECV_SIZE;
+ qp_info->send_queue.max_active = mad_sendq_size;
+ qp_info->recv_queue.max_active = mad_recvq_size;
return 0;
error:
@@ -2792,7 +2800,7 @@
init_mad_qp(port_priv, &port_priv->qp_info[0]);
init_mad_qp(port_priv, &port_priv->qp_info[1]);
- cq_size = (IB_MAD_QP_SEND_SIZE + IB_MAD_QP_RECV_SIZE) * 2;
+ cq_size = (mad_sendq_size + mad_recvq_size) * 2;
port_priv->cq = ib_create_cq(port_priv->device,
ib_mad_thread_completion_handler,
NULL, port_priv, cq_size, 0);
@@ -2984,7 +2992,11 @@
{
int ret;
- spin_lock_init(&ib_mad_port_list_lock);
+ mad_recvq_size = min(mad_recvq_size, IB_MAD_QP_MAX_SIZE);
+ mad_recvq_size = max(mad_recvq_size, IB_MAD_QP_MIN_SIZE);
+
+ mad_sendq_size = min(mad_sendq_size, IB_MAD_QP_MAX_SIZE);
+ mad_sendq_size = max(mad_sendq_size, IB_MAD_QP_MIN_SIZE);
ib_mad_cache = kmem_cache_create("ib_mad",
sizeof(struct ib_mad_private),
@@ -3021,4 +3033,3 @@
module_init(ib_mad_init_module);
module_exit(ib_mad_cleanup_module);
-
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index 05ce331..9430ab4 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -2,6 +2,7 @@
* Copyright (c) 2004, 2005, Voltaire, Inc. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -49,6 +50,8 @@
/* QP and CQ parameters */
#define IB_MAD_QP_SEND_SIZE 128
#define IB_MAD_QP_RECV_SIZE 512
+#define IB_MAD_QP_MIN_SIZE 64
+#define IB_MAD_QP_MAX_SIZE 8192
#define IB_MAD_SEND_REQ_MAX_SG 2
#define IB_MAD_RECV_REQ_MAX_SG 1
diff --git a/drivers/infiniband/core/multicast.c b/drivers/infiniband/core/multicast.c
index 107f170..8d82ba1 100644
--- a/drivers/infiniband/core/multicast.c
+++ b/drivers/infiniband/core/multicast.c
@@ -106,6 +106,8 @@
struct ib_sa_query *query;
int query_id;
u16 pkey_index;
+ u8 leave_state;
+ int retries;
};
struct mcast_member {
@@ -350,6 +352,7 @@
rec = group->rec;
rec.join_state = leave_state;
+ group->leave_state = leave_state;
ret = ib_sa_mcmember_rec_query(&sa_client, port->dev->device,
port->port_num, IB_SA_METHOD_DELETE, &rec,
@@ -542,7 +545,11 @@
{
struct mcast_group *group = context;
- mcast_work_handler(&group->work);
+ if (status && group->retries > 0 &&
+ !send_leave(group, group->leave_state))
+ group->retries--;
+ else
+ mcast_work_handler(&group->work);
}
static struct mcast_group *acquire_group(struct mcast_port *port,
@@ -565,6 +572,7 @@
if (!group)
return NULL;
+ group->retries = 3;
group->port = port;
group->rec.mgid = *mgid;
group->pkey_index = MCAST_INVALID_PKEY_INDEX;
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 1865049..8254371 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -109,10 +109,10 @@
.remove = ib_sa_remove_one
};
-static spinlock_t idr_lock;
+static DEFINE_SPINLOCK(idr_lock);
static DEFINE_IDR(query_idr);
-static spinlock_t tid_lock;
+static DEFINE_SPINLOCK(tid_lock);
static u32 tid;
#define PATH_REC_FIELD(field) \
@@ -1077,9 +1077,6 @@
{
int ret;
- spin_lock_init(&idr_lock);
- spin_lock_init(&tid_lock);
-
get_random_bytes(&tid, sizeof tid);
ret = ib_register_client(&sa_client);
diff --git a/drivers/infiniband/core/smi.c b/drivers/infiniband/core/smi.c
index 8723675..5855e44 100644
--- a/drivers/infiniband/core/smi.c
+++ b/drivers/infiniband/core/smi.c
@@ -52,6 +52,10 @@
hop_cnt = smp->hop_cnt;
/* See section 14.2.2.2, Vol 1 IB spec */
+ /* C14-6 -- valid hop_cnt values are from 0 to 63 */
+ if (hop_cnt >= IB_SMP_MAX_PATH_HOPS)
+ return IB_SMI_DISCARD;
+
if (!ib_get_smp_direction(smp)) {
/* C14-9:1 */
if (hop_cnt && hop_ptr == 0) {
@@ -133,6 +137,10 @@
hop_cnt = smp->hop_cnt;
/* See section 14.2.2.2, Vol 1 IB spec */
+ /* C14-6 -- valid hop_cnt values are from 0 to 63 */
+ if (hop_cnt >= IB_SMP_MAX_PATH_HOPS)
+ return IB_SMI_DISCARD;
+
if (!ib_get_smp_direction(smp)) {
/* C14-9:1 -- sender should have incremented hop_ptr */
if (hop_cnt && hop_ptr == 0)
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index eb36a81..d3fff9e 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -73,7 +73,7 @@
DEFINE_IDR(ib_uverbs_qp_idr);
DEFINE_IDR(ib_uverbs_srq_idr);
-static spinlock_t map_lock;
+static DEFINE_SPINLOCK(map_lock);
static struct ib_uverbs_device *dev_table[IB_UVERBS_MAX_DEVICES];
static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES);
@@ -584,14 +584,16 @@
if (hdr.command < 0 ||
hdr.command >= ARRAY_SIZE(uverbs_cmd_table) ||
- !uverbs_cmd_table[hdr.command] ||
- !(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command)))
+ !uverbs_cmd_table[hdr.command])
return -EINVAL;
if (!file->ucontext &&
hdr.command != IB_USER_VERBS_CMD_GET_CONTEXT)
return -EINVAL;
+ if (!(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command)))
+ return -ENOSYS;
+
return uverbs_cmd_table[hdr.command](file, buf + sizeof hdr,
hdr.in_words * 4, hdr.out_words * 4);
}
@@ -836,8 +838,6 @@
{
int ret;
- spin_lock_init(&map_lock);
-
ret = register_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES,
"infiniband_verbs");
if (ret) {
diff --git a/drivers/infiniband/hw/amso1100/c2.c b/drivers/infiniband/hw/amso1100/c2.c
index 0cfbb6d..c61fd2b 100644
--- a/drivers/infiniband/hw/amso1100/c2.c
+++ b/drivers/infiniband/hw/amso1100/c2.c
@@ -86,11 +86,7 @@
static void c2_print_macaddr(struct net_device *netdev)
{
- pr_debug("%s: MAC %02X:%02X:%02X:%02X:%02X:%02X, "
- "IRQ %u\n", netdev->name,
- netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
- netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5],
- netdev->irq);
+ pr_debug("%s: MAC %pM, IRQ %u\n", netdev->name, netdev->dev_addr, netdev->irq);
}
static void c2_set_rxbufsize(struct c2_port *c2_port)
@@ -530,7 +526,6 @@
netif_rx(skb);
- netdev->last_rx = jiffies;
netdev->stats.rx_packets++;
netdev->stats.rx_bytes += buflen;
}
diff --git a/drivers/infiniband/hw/amso1100/c2_provider.c b/drivers/infiniband/hw/amso1100/c2_provider.c
index f1948fa..ad723bd 100644
--- a/drivers/infiniband/hw/amso1100/c2_provider.c
+++ b/drivers/infiniband/hw/amso1100/c2_provider.c
@@ -780,11 +780,11 @@
/* Register pseudo network device */
dev->pseudo_netdev = c2_pseudo_netdev_init(dev);
if (!dev->pseudo_netdev)
- goto out3;
+ goto out;
ret = register_netdev(dev->pseudo_netdev);
if (ret)
- goto out2;
+ goto out_free_netdev;
pr_debug("%s:%u\n", __func__, __LINE__);
strlcpy(dev->ibdev.name, "amso%d", IB_DEVICE_NAME_MAX);
@@ -851,6 +851,10 @@
dev->ibdev.post_recv = c2_post_receive;
dev->ibdev.iwcm = kmalloc(sizeof(*dev->ibdev.iwcm), GFP_KERNEL);
+ if (dev->ibdev.iwcm == NULL) {
+ ret = -ENOMEM;
+ goto out_unregister_netdev;
+ }
dev->ibdev.iwcm->add_ref = c2_add_ref;
dev->ibdev.iwcm->rem_ref = c2_rem_ref;
dev->ibdev.iwcm->get_qp = c2_get_qp;
@@ -862,23 +866,25 @@
ret = ib_register_device(&dev->ibdev);
if (ret)
- goto out1;
+ goto out_free_iwcm;
for (i = 0; i < ARRAY_SIZE(c2_dev_attributes); ++i) {
ret = device_create_file(&dev->ibdev.dev,
c2_dev_attributes[i]);
if (ret)
- goto out0;
+ goto out_unregister_ibdev;
}
- goto out3;
+ goto out;
-out0:
+out_unregister_ibdev:
ib_unregister_device(&dev->ibdev);
-out1:
+out_free_iwcm:
+ kfree(dev->ibdev.iwcm);
+out_unregister_netdev:
unregister_netdev(dev->pseudo_netdev);
-out2:
+out_free_netdev:
free_netdev(dev->pseudo_netdev);
-out3:
+out:
pr_debug("%s:%u ret=%d\n", __func__, __LINE__, ret);
return ret;
}
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 62f9cf2..72ed339 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -852,7 +852,9 @@
wqe->qpcaps = attr->qpcaps;
wqe->ulpdu_size = cpu_to_be16(attr->tcp_emss);
wqe->rqe_count = cpu_to_be16(attr->rqe_count);
- wqe->flags_rtr_type = cpu_to_be16(attr->flags|V_RTR_TYPE(attr->rtr_type));
+ wqe->flags_rtr_type = cpu_to_be16(attr->flags |
+ V_RTR_TYPE(attr->rtr_type) |
+ V_CHAN(attr->chan));
wqe->ord = cpu_to_be32(attr->ord);
wqe->ird = cpu_to_be32(attr->ird);
wqe->qp_dma_addr = cpu_to_be64(attr->qp_dma_addr);
@@ -1032,6 +1034,7 @@
err2:
cxio_hal_destroy_ctrl_qp(rdev_p);
err1:
+ rdev_p->t3cdev_p->ulp = NULL;
list_del(&rdev_p->entry);
return err;
}
diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h
index 32e3b14..a197a5b 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_wr.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h
@@ -327,6 +327,11 @@
#define V_RTR_TYPE(x) ((x) << S_RTR_TYPE)
#define G_RTR_TYPE(x) ((((x) >> S_RTR_TYPE)) & M_RTR_TYPE)
+#define S_CHAN 4
+#define M_CHAN 0x3
+#define V_CHAN(x) ((x) << S_CHAN)
+#define G_CHAN(x) ((((x) >> S_CHAN)) & M_CHAN)
+
struct t3_rdma_init_attr {
u32 tid;
u32 qpid;
@@ -346,6 +351,7 @@
u16 flags;
u16 rqe_count;
u32 irs;
+ u32 chan;
};
struct t3_rdma_init_wr {
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index 26fc0a4..b0ea010 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -51,7 +51,7 @@
static void open_rnic_dev(struct t3cdev *);
static void close_rnic_dev(struct t3cdev *);
-static void iwch_err_handler(struct t3cdev *, u32, u32);
+static void iwch_event_handler(struct t3cdev *, u32, u32);
struct cxgb3_client t3c_client = {
.name = "iw_cxgb3",
@@ -59,7 +59,7 @@
.remove = close_rnic_dev,
.handlers = t3c_handlers,
.redirect = iwch_ep_redirect,
- .err_handler = iwch_err_handler
+ .event_handler = iwch_event_handler
};
static LIST_HEAD(dev_list);
@@ -105,11 +105,9 @@
static void open_rnic_dev(struct t3cdev *tdev)
{
struct iwch_dev *rnicp;
- static int vers_printed;
PDBG("%s t3cdev %p\n", __func__, tdev);
- if (!vers_printed++)
- printk(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n",
+ printk_once(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n",
DRV_VERSION);
rnicp = (struct iwch_dev *)ib_alloc_device(sizeof(*rnicp));
if (!rnicp) {
@@ -162,21 +160,36 @@
mutex_unlock(&dev_mutex);
}
-static void iwch_err_handler(struct t3cdev *tdev, u32 status, u32 error)
+static void iwch_event_handler(struct t3cdev *tdev, u32 evt, u32 port_id)
{
struct cxio_rdev *rdev = tdev->ulp;
- struct iwch_dev *rnicp = rdev_to_iwch_dev(rdev);
+ struct iwch_dev *rnicp;
struct ib_event event;
+ u32 portnum = port_id + 1;
- if (status == OFFLOAD_STATUS_DOWN) {
+ if (!rdev)
+ return;
+ rnicp = rdev_to_iwch_dev(rdev);
+ switch (evt) {
+ case OFFLOAD_STATUS_DOWN: {
rdev->flags = CXIO_ERROR_FATAL;
-
- event.device = &rnicp->ibdev;
event.event = IB_EVENT_DEVICE_FATAL;
- event.element.port_num = 0;
- ib_dispatch_event(&event);
+ break;
+ }
+ case OFFLOAD_PORT_DOWN: {
+ event.event = IB_EVENT_PORT_ERR;
+ break;
+ }
+ case OFFLOAD_PORT_UP: {
+ event.event = IB_EVENT_PORT_ACTIVE;
+ break;
+ }
}
+ event.device = &rnicp->ibdev;
+ event.element.port_num = portnum;
+ ib_dispatch_event(&event);
+
return;
}
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 52d7bb0..66b4135 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -286,7 +286,7 @@
ep = container_of(container_of(kref, struct iwch_ep_common, kref),
struct iwch_ep, com);
PDBG("%s ep %p state %s\n", __func__, ep, states[state_read(&ep->com)]);
- if (ep->com.flags & RELEASE_RESOURCES) {
+ if (test_bit(RELEASE_RESOURCES, &ep->com.flags)) {
cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
dst_release(ep->dst);
l2t_release(L2DATA(ep->com.tdev), ep->l2t);
@@ -297,7 +297,7 @@
static void release_ep_resources(struct iwch_ep *ep)
{
PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
- ep->com.flags |= RELEASE_RESOURCES;
+ set_bit(RELEASE_RESOURCES, &ep->com.flags);
put_ep(&ep->com);
}
@@ -786,10 +786,12 @@
event.private_data_len = ep->plen;
event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
event.provider_data = ep;
- if (state_read(&ep->parent_ep->com) != DEAD)
+ if (state_read(&ep->parent_ep->com) != DEAD) {
+ get_ep(&ep->com);
ep->parent_ep->com.cm_id->event_handler(
ep->parent_ep->com.cm_id,
&event);
+ }
put_ep(&ep->parent_ep->com);
ep->parent_ep = NULL;
}
@@ -1156,8 +1158,7 @@
* We get 2 abort replies from the HW. The first one must
* be ignored except for scribbling that we need one more.
*/
- if (!(ep->com.flags & ABORT_REQ_IN_PROGRESS)) {
- ep->com.flags |= ABORT_REQ_IN_PROGRESS;
+ if (!test_and_set_bit(ABORT_REQ_IN_PROGRESS, &ep->com.flags)) {
return CPL_RET_BUF_DONE;
}
@@ -1477,10 +1478,14 @@
/*
* We're gonna mark this puppy DEAD, but keep
* the reference on it until the ULP accepts or
- * rejects the CR.
+ * rejects the CR. Also wake up anyone waiting
+ * in rdma connection migration (see iwch_accept_cr()).
*/
__state_set(&ep->com, CLOSING);
- get_ep(&ep->com);
+ ep->com.rpl_done = 1;
+ ep->com.rpl_err = -ECONNRESET;
+ PDBG("waking up ep %p\n", ep);
+ wake_up(&ep->com.waitq);
break;
case MPA_REP_SENT:
__state_set(&ep->com, CLOSING);
@@ -1561,8 +1566,7 @@
* We get 2 peer aborts from the HW. The first one must
* be ignored except for scribbling that we need one more.
*/
- if (!(ep->com.flags & PEER_ABORT_IN_PROGRESS)) {
- ep->com.flags |= PEER_ABORT_IN_PROGRESS;
+ if (!test_and_set_bit(PEER_ABORT_IN_PROGRESS, &ep->com.flags)) {
return CPL_RET_BUF_DONE;
}
@@ -1589,9 +1593,13 @@
/*
* We're gonna mark this puppy DEAD, but keep
* the reference on it until the ULP accepts or
- * rejects the CR.
+ * rejects the CR. Also wake up anyone waiting
+ * in rdma connection migration (see iwch_accept_cr()).
*/
- get_ep(&ep->com);
+ ep->com.rpl_done = 1;
+ ep->com.rpl_err = -ECONNRESET;
+ PDBG("waking up ep %p\n", ep);
+ wake_up(&ep->com.waitq);
break;
case MORIBUND:
case CLOSING:
@@ -1797,6 +1805,7 @@
err = send_mpa_reject(ep, pdata, pdata_len);
err = iwch_ep_disconnect(ep, 0, GFP_KERNEL);
}
+ put_ep(&ep->com);
return 0;
}
@@ -1810,8 +1819,10 @@
struct iwch_qp *qp = get_qhp(h, conn_param->qpn);
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
- if (state_read(&ep->com) == DEAD)
- return -ECONNRESET;
+ if (state_read(&ep->com) == DEAD) {
+ err = -ECONNRESET;
+ goto err;
+ }
BUG_ON(state_read(&ep->com) != MPA_REQ_RCVD);
BUG_ON(!qp);
@@ -1819,15 +1830,14 @@
if ((conn_param->ord > qp->rhp->attr.max_rdma_read_qp_depth) ||
(conn_param->ird > qp->rhp->attr.max_rdma_reads_per_qp)) {
abort_connection(ep, NULL, GFP_KERNEL);
- return -EINVAL;
+ err = -EINVAL;
+ goto err;
}
cm_id->add_ref(cm_id);
ep->com.cm_id = cm_id;
ep->com.qp = qp;
- ep->com.rpl_done = 0;
- ep->com.rpl_err = 0;
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
@@ -1836,8 +1846,6 @@
PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
- get_ep(&ep->com);
-
/* bind QP to EP and move to RTS */
attrs.mpa_attr = ep->mpa_attr;
attrs.max_ird = ep->ird;
@@ -1855,30 +1863,31 @@
err = iwch_modify_qp(ep->com.qp->rhp,
ep->com.qp, mask, &attrs, 1);
if (err)
- goto err;
+ goto err1;
/* if needed, wait for wr_ack */
if (iwch_rqes_posted(qp)) {
wait_event(ep->com.waitq, ep->com.rpl_done);
err = ep->com.rpl_err;
if (err)
- goto err;
+ goto err1;
}
err = send_mpa_reply(ep, conn_param->private_data,
conn_param->private_data_len);
if (err)
- goto err;
+ goto err1;
state_set(&ep->com, FPDU_MODE);
established_upcall(ep);
put_ep(&ep->com);
return 0;
-err:
+err1:
ep->com.cm_id = NULL;
ep->com.qp = NULL;
cm_id->rem_ref(cm_id);
+err:
put_ep(&ep->com);
return err;
}
@@ -2097,14 +2106,17 @@
ep->com.state = CLOSING;
start_ep_timer(ep);
}
+ set_bit(CLOSE_SENT, &ep->com.flags);
break;
case CLOSING:
- close = 1;
- if (abrupt) {
- stop_ep_timer(ep);
- ep->com.state = ABORTING;
- } else
- ep->com.state = MORIBUND;
+ if (!test_and_set_bit(CLOSE_SENT, &ep->com.flags)) {
+ close = 1;
+ if (abrupt) {
+ stop_ep_timer(ep);
+ ep->com.state = ABORTING;
+ } else
+ ep->com.state = MORIBUND;
+ }
break;
case MORIBUND:
case ABORTING:
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.h b/drivers/infiniband/hw/cxgb3/iwch_cm.h
index 43c0aea..b9efadf 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.h
@@ -145,9 +145,10 @@
};
enum iwch_ep_flags {
- PEER_ABORT_IN_PROGRESS = (1 << 0),
- ABORT_REQ_IN_PROGRESS = (1 << 1),
- RELEASE_RESOURCES = (1 << 2),
+ PEER_ABORT_IN_PROGRESS = 0,
+ ABORT_REQ_IN_PROGRESS = 1,
+ RELEASE_RESOURCES = 2,
+ CLOSE_SENT = 3,
};
struct iwch_ep_common {
@@ -162,7 +163,7 @@
wait_queue_head_t waitq;
int rpl_done;
int rpl_err;
- u32 flags;
+ unsigned long flags;
};
struct iwch_listen_ep {
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index ec49a5c..e1ec65e 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -39,7 +39,7 @@
#include "iwch.h"
#include "iwch_provider.h"
-static void iwch_finish_mem_reg(struct iwch_mr *mhp, u32 stag)
+static int iwch_finish_mem_reg(struct iwch_mr *mhp, u32 stag)
{
u32 mmid;
@@ -47,14 +47,15 @@
mhp->attr.stag = stag;
mmid = stag >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- insert_handle(mhp->rhp, &mhp->rhp->mmidr, mhp, mmid);
PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
+ return insert_handle(mhp->rhp, &mhp->rhp->mmidr, mhp, mmid);
}
int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php,
struct iwch_mr *mhp, int shift)
{
u32 stag;
+ int ret;
if (cxio_register_phys_mem(&rhp->rdev,
&stag, mhp->attr.pdid,
@@ -66,9 +67,11 @@
mhp->attr.pbl_size, mhp->attr.pbl_addr))
return -ENOMEM;
- iwch_finish_mem_reg(mhp, stag);
-
- return 0;
+ ret = iwch_finish_mem_reg(mhp, stag);
+ if (ret)
+ cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size,
+ mhp->attr.pbl_addr);
+ return ret;
}
int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php,
@@ -77,6 +80,7 @@
int npages)
{
u32 stag;
+ int ret;
/* We could support this... */
if (npages > mhp->attr.pbl_size)
@@ -93,9 +97,12 @@
mhp->attr.pbl_size, mhp->attr.pbl_addr))
return -ENOMEM;
- iwch_finish_mem_reg(mhp, stag);
+ ret = iwch_finish_mem_reg(mhp, stag);
+ if (ret)
+ cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size,
+ mhp->attr.pbl_addr);
- return 0;
+ return ret;
}
int iwch_alloc_pbl(struct iwch_mr *mhp, int npages)
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index e2a6321..6895523 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -195,7 +195,11 @@
spin_lock_init(&chp->lock);
atomic_set(&chp->refcnt, 1);
init_waitqueue_head(&chp->wait);
- insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid);
+ if (insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid)) {
+ cxio_destroy_cq(&chp->rhp->rdev, &chp->cq);
+ kfree(chp);
+ return ERR_PTR(-ENOMEM);
+ }
if (ucontext) {
struct iwch_mm_entry *mm;
@@ -750,7 +754,11 @@
mhp->attr.stag = stag;
mmid = (stag) >> 8;
mhp->ibmw.rkey = stag;
- insert_handle(rhp, &rhp->mmidr, mhp, mmid);
+ if (insert_handle(rhp, &rhp->mmidr, mhp, mmid)) {
+ cxio_deallocate_window(&rhp->rdev, mhp->attr.stag);
+ kfree(mhp);
+ return ERR_PTR(-ENOMEM);
+ }
PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag);
return &(mhp->ibmw);
}
@@ -778,37 +786,43 @@
struct iwch_mr *mhp;
u32 mmid;
u32 stag = 0;
- int ret;
+ int ret = 0;
php = to_iwch_pd(pd);
rhp = php->rhp;
mhp = kzalloc(sizeof(*mhp), GFP_KERNEL);
if (!mhp)
- return ERR_PTR(-ENOMEM);
+ goto err;
mhp->rhp = rhp;
ret = iwch_alloc_pbl(mhp, pbl_depth);
- if (ret) {
- kfree(mhp);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto err1;
mhp->attr.pbl_size = pbl_depth;
ret = cxio_allocate_stag(&rhp->rdev, &stag, php->pdid,
mhp->attr.pbl_size, mhp->attr.pbl_addr);
- if (ret) {
- iwch_free_pbl(mhp);
- kfree(mhp);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto err2;
mhp->attr.pdid = php->pdid;
mhp->attr.type = TPT_NON_SHARED_MR;
mhp->attr.stag = stag;
mhp->attr.state = 1;
mmid = (stag) >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- insert_handle(rhp, &rhp->mmidr, mhp, mmid);
+ if (insert_handle(rhp, &rhp->mmidr, mhp, mmid))
+ goto err3;
+
PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag);
return &(mhp->ibmr);
+err3:
+ cxio_dereg_mem(&rhp->rdev, stag, mhp->attr.pbl_size,
+ mhp->attr.pbl_addr);
+err2:
+ iwch_free_pbl(mhp);
+err1:
+ kfree(mhp);
+err:
+ return ERR_PTR(ret);
}
static struct ib_fast_reg_page_list *iwch_alloc_fastreg_pbl(
@@ -961,7 +975,13 @@
spin_lock_init(&qhp->lock);
init_waitqueue_head(&qhp->wait);
atomic_set(&qhp->refcnt, 1);
- insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.qpid);
+
+ if (insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.qpid)) {
+ cxio_destroy_qp(&rhp->rdev, &qhp->wq,
+ ucontext ? &ucontext->uctx : &rhp->rdev.uctx);
+ kfree(qhp);
+ return ERR_PTR(-ENOMEM);
+ }
if (udata) {
@@ -1418,6 +1438,7 @@
bail2:
ib_unregister_device(&dev->ibdev);
bail1:
+ kfree(dev->ibdev.iwcm);
return ret;
}
@@ -1430,5 +1451,6 @@
device_remove_file(&dev->ibdev.dev,
iwch_class_attributes[i]);
ib_unregister_device(&dev->ibdev);
+ kfree(dev->ibdev.iwcm);
return;
}
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 27bbdc8..6e86534 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -889,6 +889,7 @@
init_attr.qp_dma_size = (1UL << qhp->wq.size_log2);
init_attr.rqe_count = iwch_rqes_posted(qhp);
init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0;
+ init_attr.chan = qhp->ep->l2t->smt_idx;
if (peer2peer) {
init_attr.rtr_type = RTR_READ;
if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator)
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index fab18a2..5b635aa 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
#include "ehca_tools.h"
#include "hcp_if.h"
-#define HCAD_VERSION "0028"
+#define HCAD_VERSION "0029"
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
@@ -64,7 +64,7 @@
static int ehca_poll_all_eqs = 1;
int ehca_debug_level = 0;
-int ehca_nr_ports = 2;
+int ehca_nr_ports = -1;
int ehca_use_hp_mr = 0;
int ehca_port_act_time = 30;
int ehca_static_rate = -1;
@@ -95,8 +95,8 @@
"Hardware level (0: autosensing (default), "
"0x10..0x14: eHCA, 0x20..0x23: eHCA2)");
MODULE_PARM_DESC(nr_ports,
- "number of connected ports (-1: autodetect, 1: port one only, "
- "2: two ports (default)");
+ "number of connected ports (-1: autodetect (default), "
+ "1: port one only, 2: two ports)");
MODULE_PARM_DESC(use_hp_mr,
"Use high performance MRs (default: no)");
MODULE_PARM_DESC(port_act_time,
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 5a3d96f..8fd88cd 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -786,7 +786,11 @@
wc->slid = cqe->rlid;
wc->dlid_path_bits = cqe->dlid;
wc->src_qp = cqe->remote_qp_number;
- wc->wc_flags = cqe->w_completion_flags;
+ /*
+ * HW has "Immed data present" and "GRH present" in bits 6 and 5.
+ * SW defines those in bits 1 and 0, so we can just shift and mask.
+ */
+ wc->wc_flags = (cqe->w_completion_flags >> 5) & 3;
wc->ex.imm_data = cpu_to_be32(cqe->immediate_data);
wc->sl = cqe->service_level;
diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c
index c568b28..8c1213f 100644
--- a/drivers/infiniband/hw/ehca/ehca_sqp.c
+++ b/drivers/infiniband/hw/ehca/ehca_sqp.c
@@ -125,14 +125,30 @@
u8 data[192];
} __attribute__ ((packed));
+/* TC/SL/FL packed into 32 bits, as in ClassPortInfo */
+struct tcslfl {
+ u32 tc:8;
+ u32 sl:4;
+ u32 fl:20;
+} __attribute__ ((packed));
+
+/* IP Version/TC/FL packed into 32 bits, as in GRH */
+struct vertcfl {
+ u32 ver:4;
+ u32 tc:8;
+ u32 fl:20;
+} __attribute__ ((packed));
static int ehca_process_perf(struct ib_device *ibdev, u8 port_num,
+ struct ib_wc *in_wc, struct ib_grh *in_grh,
struct ib_mad *in_mad, struct ib_mad *out_mad)
{
struct ib_perf *in_perf = (struct ib_perf *)in_mad;
struct ib_perf *out_perf = (struct ib_perf *)out_mad;
struct ib_class_port_info *poi =
(struct ib_class_port_info *)out_perf->data;
+ struct tcslfl *tcslfl =
+ (struct tcslfl *)&poi->redirect_tcslfl;
struct ehca_shca *shca =
container_of(ibdev, struct ehca_shca, ib_device);
struct ehca_sport *sport = &shca->sport[port_num - 1];
@@ -158,10 +174,29 @@
poi->base_version = 1;
poi->class_version = 1;
poi->resp_time_value = 18;
- poi->redirect_lid = sport->saved_attr.lid;
- poi->redirect_qp = sport->pma_qp_nr;
+
+ /* copy local routing information from WC where applicable */
+ tcslfl->sl = in_wc->sl;
+ poi->redirect_lid =
+ sport->saved_attr.lid | in_wc->dlid_path_bits;
+ poi->redirect_qp = sport->pma_qp_nr;
poi->redirect_qkey = IB_QP1_QKEY;
- poi->redirect_pkey = IB_DEFAULT_PKEY_FULL;
+
+ ehca_query_pkey(ibdev, port_num, in_wc->pkey_index,
+ &poi->redirect_pkey);
+
+ /* if request was globally routed, copy route info */
+ if (in_grh) {
+ struct vertcfl *vertcfl =
+ (struct vertcfl *)&in_grh->version_tclass_flow;
+ memcpy(poi->redirect_gid, in_grh->dgid.raw,
+ sizeof(poi->redirect_gid));
+ tcslfl->tc = vertcfl->tc;
+ tcslfl->fl = vertcfl->fl;
+ } else
+ /* else only fill in default GID */
+ ehca_query_gid(ibdev, port_num, 0,
+ (union ib_gid *)&poi->redirect_gid);
ehca_dbg(ibdev, "ehca_pma_lid=%x ehca_pma_qp=%x",
sport->saved_attr.lid, sport->pma_qp_nr);
@@ -183,8 +218,7 @@
int ehca_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
struct ib_wc *in_wc, struct ib_grh *in_grh,
- struct ib_mad *in_mad,
- struct ib_mad *out_mad)
+ struct ib_mad *in_mad, struct ib_mad *out_mad)
{
int ret;
@@ -196,7 +230,8 @@
return IB_MAD_RESULT_SUCCESS;
ehca_dbg(ibdev, "port_num=%x src_qp=%x", port_num, in_wc->src_qp);
- ret = ehca_process_perf(ibdev, port_num, in_mad, out_mad);
+ ret = ehca_process_perf(ibdev, port_num, in_wc, in_grh,
+ in_mad, out_mad);
return ret;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 2317398..38a2870 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1616,7 +1616,7 @@
pd->port_cnt = 1;
port_fp(fp) = pd;
pd->port_pid = get_pid(task_pid(current));
- strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
+ strlcpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
ipath_stats.sps_ports++;
ret = 0;
} else
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index 16a702d..ceb98ee 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -60,7 +60,7 @@
if (smp->attr_mod)
smp->status |= IB_SMP_INVALID_FIELD;
- strncpy(smp->data, ibdev->node_desc, sizeof(smp->data));
+ memcpy(smp->data, ibdev->node_desc, sizeof(smp->data));
return reply(smp);
}
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index ae3d759..3cb3f47 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -342,6 +342,9 @@
struct mlx4_ib_alloc_ucontext_resp resp;
int err;
+ if (!dev->ib_active)
+ return ERR_PTR(-EAGAIN);
+
resp.qp_tab_size = dev->dev->caps.num_qps;
resp.bf_reg_size = dev->dev->caps.bf_reg_size;
resp.bf_regs_per_page = dev->dev->caps.bf_regs_per_page;
@@ -540,15 +543,11 @@
static void *mlx4_ib_add(struct mlx4_dev *dev)
{
- static int mlx4_ib_version_printed;
struct mlx4_ib_dev *ibdev;
int num_ports = 0;
int i;
- if (!mlx4_ib_version_printed) {
- printk(KERN_INFO "%s", mlx4_ib_version);
- ++mlx4_ib_version_printed;
- }
+ printk_once(KERN_INFO "%s", mlx4_ib_version);
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
num_ports++;
@@ -673,6 +672,8 @@
goto err_reg;
}
+ ibdev->ib_active = true;
+
return ibdev;
err_reg:
@@ -729,6 +730,7 @@
break;
case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
+ ibdev->ib_active = false;
ibev.event = IB_EVENT_DEVICE_FATAL;
break;
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 8a7dd67..3486d76 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -175,6 +175,7 @@
spinlock_t sm_lock;
struct mutex cap_mask_mutex;
+ bool ib_active;
};
static inline struct mlx4_ib_dev *to_mdev(struct ib_device *ibdev)
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index c4a0264..219b103 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -615,10 +615,12 @@
}
static void mlx4_ib_lock_cqs(struct mlx4_ib_cq *send_cq, struct mlx4_ib_cq *recv_cq)
+ __acquires(&send_cq->lock) __acquires(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
spin_lock_irq(&send_cq->lock);
- else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
+ __acquire(&recv_cq->lock);
+ } else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
spin_lock_irq(&send_cq->lock);
spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING);
} else {
@@ -628,10 +630,12 @@
}
static void mlx4_ib_unlock_cqs(struct mlx4_ib_cq *send_cq, struct mlx4_ib_cq *recv_cq)
+ __releases(&send_cq->lock) __releases(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
+ __release(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
- else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
+ } else if (send_cq->mcq.cqn < recv_cq->mcq.cqn) {
spin_unlock(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
} else {
diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c
index 65ad359..056b2a4 100644
--- a/drivers/infiniband/hw/mthca/mthca_catas.c
+++ b/drivers/infiniband/hw/mthca/mthca_catas.c
@@ -88,6 +88,7 @@
event.device = &dev->ib_dev;
event.event = IB_EVENT_DEVICE_FATAL;
event.element.port_num = 0;
+ dev->active = false;
ib_dispatch_event(&event);
diff --git a/drivers/infiniband/hw/mthca/mthca_config_reg.h b/drivers/infiniband/hw/mthca/mthca_config_reg.h
index 75671f7..155bc66 100644
--- a/drivers/infiniband/hw/mthca/mthca_config_reg.h
+++ b/drivers/infiniband/hw/mthca/mthca_config_reg.h
@@ -34,8 +34,6 @@
#ifndef MTHCA_CONFIG_REG_H
#define MTHCA_CONFIG_REG_H
-#include <asm/page.h>
-
#define MTHCA_HCR_BASE 0x80680
#define MTHCA_HCR_SIZE 0x0001c
#define MTHCA_ECR_BASE 0x80700
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 9ef611f..7e6a6d6 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -357,6 +357,7 @@
struct ib_ah *sm_ah[MTHCA_MAX_PORTS];
spinlock_t sm_lock;
u8 rate[MTHCA_MAX_PORTS];
+ bool active;
};
#ifdef CONFIG_INFINIBAND_MTHCA_DEBUG
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 90e4e45..8c31fa3 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -829,27 +829,34 @@
if (dev->mthca_flags & MTHCA_FLAG_MSI_X) {
static const char *eq_name[] = {
- [MTHCA_EQ_COMP] = DRV_NAME " (comp)",
- [MTHCA_EQ_ASYNC] = DRV_NAME " (async)",
- [MTHCA_EQ_CMD] = DRV_NAME " (cmd)"
+ [MTHCA_EQ_COMP] = DRV_NAME "-comp",
+ [MTHCA_EQ_ASYNC] = DRV_NAME "-async",
+ [MTHCA_EQ_CMD] = DRV_NAME "-cmd"
};
for (i = 0; i < MTHCA_NUM_EQ; ++i) {
+ snprintf(dev->eq_table.eq[i].irq_name,
+ IB_DEVICE_NAME_MAX,
+ "%s@pci:%s", eq_name[i],
+ pci_name(dev->pdev));
err = request_irq(dev->eq_table.eq[i].msi_x_vector,
mthca_is_memfree(dev) ?
mthca_arbel_msi_x_interrupt :
mthca_tavor_msi_x_interrupt,
- 0, eq_name[i], dev->eq_table.eq + i);
+ 0, dev->eq_table.eq[i].irq_name,
+ dev->eq_table.eq + i);
if (err)
goto err_out_cmd;
dev->eq_table.eq[i].have_irq = 1;
}
} else {
+ snprintf(dev->eq_table.eq[0].irq_name, IB_DEVICE_NAME_MAX,
+ DRV_NAME "@pci:%s", pci_name(dev->pdev));
err = request_irq(dev->pdev->irq,
mthca_is_memfree(dev) ?
mthca_arbel_interrupt :
mthca_tavor_interrupt,
- IRQF_SHARED, DRV_NAME, dev);
+ IRQF_SHARED, dev->eq_table.eq[0].irq_name, dev);
if (err)
goto err_out_cmd;
dev->eq_table.have_irq = 1;
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 13da9f1..b01b2898 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -1116,6 +1116,8 @@
pci_set_drvdata(pdev, mdev);
mdev->hca_type = hca_type;
+ mdev->active = true;
+
return 0;
err_unregister:
@@ -1215,15 +1217,11 @@
static int __devinit mthca_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- static int mthca_version_printed = 0;
int ret;
mutex_lock(&mthca_device_mutex);
- if (!mthca_version_printed) {
- printk(KERN_INFO "%s", mthca_version);
- ++mthca_version_printed;
- }
+ printk_once(KERN_INFO "%s", mthca_version);
if (id->driver_data >= ARRAY_SIZE(mthca_hca_table)) {
printk(KERN_ERR PFX "%s has invalid driver data %lx\n",
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 87ad889..bcf7a40 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -334,6 +334,9 @@
struct mthca_ucontext *context;
int err;
+ if (!(to_mdev(ibdev)->active))
+ return ERR_PTR(-EAGAIN);
+
memset(&uresp, 0, sizeof uresp);
uresp.qp_tab_size = to_mdev(ibdev)->limits.num_qps;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h
index c621f87..90f4c4d 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.h
+++ b/drivers/infiniband/hw/mthca/mthca_provider.h
@@ -113,6 +113,7 @@
int nent;
struct mthca_buf_list *page_list;
struct mthca_mr mr;
+ char irq_name[IB_DEVICE_NAME_MAX];
};
struct mthca_av;
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index f5081bf..c10576f 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -1319,10 +1319,12 @@
}
static void mthca_lock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq)
+ __acquires(&send_cq->lock) __acquires(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
spin_lock_irq(&send_cq->lock);
- else if (send_cq->cqn < recv_cq->cqn) {
+ __acquire(&recv_cq->lock);
+ } else if (send_cq->cqn < recv_cq->cqn) {
spin_lock_irq(&send_cq->lock);
spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING);
} else {
@@ -1332,10 +1334,12 @@
}
static void mthca_unlock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq)
+ __releases(&send_cq->lock) __releases(&recv_cq->lock)
{
- if (send_cq == recv_cq)
+ if (send_cq == recv_cq) {
+ __release(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
- else if (send_cq->cqn < recv_cq->cqn) {
+ } else if (send_cq->cqn < recv_cq->cqn) {
spin_unlock(&recv_cq->lock);
spin_unlock_irq(&send_cq->lock);
} else {
diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c b/drivers/infiniband/hw/mthca/mthca_reset.c
index acb6817f..2a13a16 100644
--- a/drivers/infiniband/hw/mthca/mthca_reset.c
+++ b/drivers/infiniband/hw/mthca/mthca_reset.c
@@ -30,7 +30,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index bf1720f..bcc6abc 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -523,7 +523,7 @@
void nes_cm_disconn_worker(void *);
/* nes_verbs.c */
-int nes_hw_modify_qp(struct nes_device *, struct nes_qp *, u32, u32);
+int nes_hw_modify_qp(struct nes_device *, struct nes_qp *, u32, u32, u32);
int nes_modify_qp(struct ib_qp *, struct ib_qp_attr *, int, struct ib_udata *);
struct nes_ib_device *nes_init_ofa_device(struct net_device *);
void nes_destroy_ofa_device(struct nes_ib_device *);
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 114b802..73473db 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2450,19 +2450,16 @@
*/
int nes_cm_disconn(struct nes_qp *nesqp)
{
- unsigned long flags;
+ struct disconn_work *work;
- spin_lock_irqsave(&nesqp->lock, flags);
- if (nesqp->disconn_pending == 0) {
- nesqp->disconn_pending++;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- /* init our disconnect work element, to */
- INIT_WORK(&nesqp->disconn_work, nes_disconnect_worker);
+ work = kzalloc(sizeof *work, GFP_ATOMIC);
+ if (!work)
+ return -ENOMEM; /* Timer will clean up */
- queue_work(g_cm_core->disconn_wq, &nesqp->disconn_work);
- } else
- spin_unlock_irqrestore(&nesqp->lock, flags);
-
+ nes_add_ref(&nesqp->ibqp);
+ work->nesqp = nesqp;
+ INIT_WORK(&work->work, nes_disconnect_worker);
+ queue_work(g_cm_core->disconn_wq, &work->work);
return 0;
}
@@ -2472,11 +2469,14 @@
*/
static void nes_disconnect_worker(struct work_struct *work)
{
- struct nes_qp *nesqp = container_of(work, struct nes_qp, disconn_work);
+ struct disconn_work *dwork = container_of(work, struct disconn_work, work);
+ struct nes_qp *nesqp = dwork->nesqp;
+ kfree(dwork);
nes_debug(NES_DBG_CM, "processing AEQE id 0x%04X for QP%u.\n",
nesqp->last_aeq, nesqp->hwqp.qp_id);
nes_cm_disconn_true(nesqp);
+ nes_rem_ref(&nesqp->ibqp);
}
@@ -2493,7 +2493,12 @@
u16 last_ae;
u8 original_hw_tcp_state;
u8 original_ibqp_state;
- u8 issued_disconnect_reset = 0;
+ enum iw_cm_event_type disconn_status = IW_CM_EVENT_STATUS_OK;
+ int issue_disconn = 0;
+ int issue_close = 0;
+ int issue_flush = 0;
+ u32 flush_q = NES_CQP_FLUSH_RQ;
+ struct ib_event ibevent;
if (!nesqp) {
nes_debug(NES_DBG_CM, "disconnect_worker nesqp is NULL\n");
@@ -2517,24 +2522,55 @@
original_ibqp_state = nesqp->ibqp_state;
last_ae = nesqp->last_aeq;
+ if (nesqp->term_flags) {
+ issue_disconn = 1;
+ issue_close = 1;
+ nesqp->cm_id = NULL;
+ if (nesqp->flush_issued == 0) {
+ nesqp->flush_issued = 1;
+ issue_flush = 1;
+ }
+ } else if ((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
+ ((original_ibqp_state == IB_QPS_RTS) &&
+ (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ issue_disconn = 1;
+ if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET)
+ disconn_status = IW_CM_EVENT_STATUS_RESET;
+ }
- nes_debug(NES_DBG_CM, "set ibqp_state=%u\n", nesqp->ibqp_state);
+ if (((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
+ (original_hw_tcp_state == NES_AEQE_TCP_STATE_TIME_WAIT) ||
+ (last_ae == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) ||
+ (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ issue_close = 1;
+ nesqp->cm_id = NULL;
+ if (nesqp->flush_issued == 0) {
+ nesqp->flush_issued = 1;
+ issue_flush = 1;
+ }
+ }
- if ((nesqp->cm_id) && (cm_id->event_handler)) {
- if ((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
- ((original_ibqp_state == IB_QPS_RTS) &&
- (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ if ((issue_flush) && (nesqp->destroyed == 0)) {
+ /* Flush the queue(s) */
+ if (nesqp->hw_iwarp_state >= NES_AEQE_IWARP_STATE_TERMINATE)
+ flush_q |= NES_CQP_FLUSH_SQ;
+ flush_wqes(nesvnic->nesdev, nesqp, flush_q, 1);
+
+ if (nesqp->term_flags) {
+ ibevent.device = nesqp->ibqp.device;
+ ibevent.event = nesqp->terminate_eventtype;
+ ibevent.element.qp = &nesqp->ibqp;
+ nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
+ }
+ }
+
+ if ((cm_id) && (cm_id->event_handler)) {
+ if (issue_disconn) {
atomic_inc(&cm_disconnects);
cm_event.event = IW_CM_EVENT_DISCONNECT;
- if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
- cm_event.status = IW_CM_EVENT_STATUS_RESET;
- nes_debug(NES_DBG_CM, "Generating a CM "
- "Disconnect Event (status reset) for "
- "QP%u, cm_id = %p. \n",
- nesqp->hwqp.qp_id, cm_id);
- } else
- cm_event.status = IW_CM_EVENT_STATUS_OK;
-
+ cm_event.status = disconn_status;
cm_event.local_addr = cm_id->local_addr;
cm_event.remote_addr = cm_id->remote_addr;
cm_event.private_data = NULL;
@@ -2547,29 +2583,14 @@
nesqp->hwqp.sq_tail, cm_id,
atomic_read(&nesqp->refcount));
- spin_unlock_irqrestore(&nesqp->lock, flags);
ret = cm_id->event_handler(cm_id, &cm_event);
if (ret)
nes_debug(NES_DBG_CM, "OFA CM event_handler "
"returned, ret=%d\n", ret);
- spin_lock_irqsave(&nesqp->lock, flags);
}
- nesqp->disconn_pending = 0;
- /* There might have been another AE while the lock was released */
- original_hw_tcp_state = nesqp->hw_tcp_state;
- original_ibqp_state = nesqp->ibqp_state;
- last_ae = nesqp->last_aeq;
-
- if ((issued_disconnect_reset == 0) && (nesqp->cm_id) &&
- ((original_hw_tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
- (original_hw_tcp_state == NES_AEQE_TCP_STATE_TIME_WAIT) ||
- (last_ae == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) ||
- (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
+ if (issue_close) {
atomic_inc(&cm_closes);
- nesqp->cm_id = NULL;
- nesqp->in_disconnect = 0;
- spin_unlock_irqrestore(&nesqp->lock, flags);
nes_disconnect(nesqp, 1);
cm_id->provider_data = nesqp;
@@ -2588,28 +2609,7 @@
}
cm_id->rem_ref(cm_id);
-
- spin_lock_irqsave(&nesqp->lock, flags);
- if (nesqp->flush_issued == 0) {
- nesqp->flush_issued = 1;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- flush_wqes(nesvnic->nesdev, nesqp,
- NES_CQP_FLUSH_RQ, 1);
- } else
- spin_unlock_irqrestore(&nesqp->lock, flags);
- } else {
- cm_id = nesqp->cm_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- /* check to see if the inbound reset beat the outbound reset */
- if ((!cm_id) && (last_ae==NES_AEQE_AEID_RESET_SENT)) {
- nes_debug(NES_DBG_CM, "QP%u: Decing refcount "
- "due to inbound reset beating the "
- "outbound reset.\n", nesqp->hwqp.qp_id);
- }
}
- } else {
- nesqp->disconn_pending = 0;
- spin_unlock_irqrestore(&nesqp->lock, flags);
}
return 0;
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index 8b7e7c0..90e8e4d 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -410,8 +410,6 @@
int schedule_nes_timer(struct nes_cm_node *, struct sk_buff *,
enum nes_timer_type, int, int);
-int nes_cm_disconn(struct nes_qp *);
-
int nes_accept(struct iw_cm_id *, struct iw_cm_conn_param *);
int nes_reject(struct iw_cm_id *, const void *, u8);
int nes_connect(struct iw_cm_id *, struct iw_cm_conn_param *);
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 4a84d02e..3512d6d 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -74,6 +74,8 @@
static void process_critical_error(struct nes_device *nesdev);
static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number);
static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_Mode);
+static void nes_terminate_timeout(unsigned long context);
+static void nes_terminate_start_timer(struct nes_qp *nesqp);
#ifdef CONFIG_INFINIBAND_NES_DEBUG
static unsigned char *nes_iwarp_state_str[] = {
@@ -2741,7 +2743,7 @@
}
skip_rx_indicate0:
- nesvnic->netdev->last_rx = jiffies;
+ ;
/* nesvnic->netstats.rx_packets++; */
/* nesvnic->netstats.rx_bytes += rx_pkt_size; */
}
@@ -2903,6 +2905,417 @@
}
+static u8 *locate_mpa(u8 *pkt, u32 aeq_info)
+{
+ u16 pkt_len;
+
+ if (aeq_info & NES_AEQE_Q2_DATA_ETHERNET) {
+ /* skip over ethernet header */
+ pkt_len = be16_to_cpu(*(u16 *)(pkt + ETH_HLEN - 2));
+ pkt += ETH_HLEN;
+
+ /* Skip over IP and TCP headers */
+ pkt += 4 * (pkt[0] & 0x0f);
+ pkt += 4 * ((pkt[12] >> 4) & 0x0f);
+ }
+ return pkt;
+}
+
+/* Determine if incoming error pkt is rdma layer */
+static u32 iwarp_opcode(struct nes_qp *nesqp, u32 aeq_info)
+{
+ u8 *pkt;
+ u16 *mpa;
+ u32 opcode = 0xffffffff;
+
+ if (aeq_info & NES_AEQE_Q2_DATA_WRITTEN) {
+ pkt = nesqp->hwqp.q2_vbase + BAD_FRAME_OFFSET;
+ mpa = (u16 *)locate_mpa(pkt, aeq_info);
+ opcode = be16_to_cpu(mpa[1]) & 0xf;
+ }
+
+ return opcode;
+}
+
+/* Build iWARP terminate header */
+static int nes_bld_terminate_hdr(struct nes_qp *nesqp, u16 async_event_id, u32 aeq_info)
+{
+ u8 *pkt = nesqp->hwqp.q2_vbase + BAD_FRAME_OFFSET;
+ u16 ddp_seg_len;
+ int copy_len = 0;
+ u8 is_tagged = 0;
+ u8 flush_code = 0;
+ struct nes_terminate_hdr *termhdr;
+
+ termhdr = (struct nes_terminate_hdr *)nesqp->hwqp.q2_vbase;
+ memset(termhdr, 0, 64);
+
+ if (aeq_info & NES_AEQE_Q2_DATA_WRITTEN) {
+
+ /* Use data from offending packet to fill in ddp & rdma hdrs */
+ pkt = locate_mpa(pkt, aeq_info);
+ ddp_seg_len = be16_to_cpu(*(u16 *)pkt);
+ if (ddp_seg_len) {
+ copy_len = 2;
+ termhdr->hdrct = DDP_LEN_FLAG;
+ if (pkt[2] & 0x80) {
+ is_tagged = 1;
+ if (ddp_seg_len >= TERM_DDP_LEN_TAGGED) {
+ copy_len += TERM_DDP_LEN_TAGGED;
+ termhdr->hdrct |= DDP_HDR_FLAG;
+ }
+ } else {
+ if (ddp_seg_len >= TERM_DDP_LEN_UNTAGGED) {
+ copy_len += TERM_DDP_LEN_UNTAGGED;
+ termhdr->hdrct |= DDP_HDR_FLAG;
+ }
+
+ if (ddp_seg_len >= (TERM_DDP_LEN_UNTAGGED + TERM_RDMA_LEN)) {
+ if ((pkt[3] & RDMA_OPCODE_MASK) == RDMA_READ_REQ_OPCODE) {
+ copy_len += TERM_RDMA_LEN;
+ termhdr->hdrct |= RDMA_HDR_FLAG;
+ }
+ }
+ }
+ }
+ }
+
+ switch (async_event_id) {
+ case NES_AEQE_AEID_AMP_UNALLOCATED_STAG:
+ switch (iwarp_opcode(nesqp, aeq_info)) {
+ case IWARP_OPCODE_WRITE:
+ flush_code = IB_WC_LOC_PROT_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_INV_STAG;
+ break;
+ default:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_STAG;
+ }
+ break;
+ case NES_AEQE_AEID_AMP_INVALID_STAG:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_STAG;
+ break;
+ case NES_AEQE_AEID_AMP_BAD_QP:
+ flush_code = IB_WC_LOC_QP_OP_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_QN;
+ break;
+ case NES_AEQE_AEID_AMP_BAD_STAG_KEY:
+ case NES_AEQE_AEID_AMP_BAD_STAG_INDEX:
+ switch (iwarp_opcode(nesqp, aeq_info)) {
+ case IWARP_OPCODE_SEND_INV:
+ case IWARP_OPCODE_SEND_SE_INV:
+ flush_code = IB_WC_REM_OP_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_CANT_INV_STAG;
+ break;
+ default:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_STAG;
+ }
+ break;
+ case NES_AEQE_AEID_AMP_BOUNDS_VIOLATION:
+ if (aeq_info & (NES_AEQE_Q2_DATA_ETHERNET | NES_AEQE_Q2_DATA_MPA)) {
+ flush_code = IB_WC_LOC_PROT_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_BOUNDS;
+ } else {
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_INV_BOUNDS;
+ }
+ break;
+ case NES_AEQE_AEID_AMP_RIGHTS_VIOLATION:
+ case NES_AEQE_AEID_AMP_INVALIDATE_NO_REMOTE_ACCESS_RIGHTS:
+ case NES_AEQE_AEID_PRIV_OPERATION_DENIED:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_ACCESS;
+ break;
+ case NES_AEQE_AEID_AMP_TO_WRAP:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_TO_WRAP;
+ break;
+ case NES_AEQE_AEID_AMP_BAD_PD:
+ switch (iwarp_opcode(nesqp, aeq_info)) {
+ case IWARP_OPCODE_WRITE:
+ flush_code = IB_WC_LOC_PROT_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_UNASSOC_STAG;
+ break;
+ case IWARP_OPCODE_SEND_INV:
+ case IWARP_OPCODE_SEND_SE_INV:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_CANT_INV_STAG;
+ break;
+ default:
+ flush_code = IB_WC_REM_ACCESS_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_PROT;
+ termhdr->error_code = RDMAP_UNASSOC_STAG;
+ }
+ break;
+ case NES_AEQE_AEID_LLP_RECEIVED_MARKER_AND_LENGTH_FIELDS_DONT_MATCH:
+ flush_code = IB_WC_LOC_LEN_ERR;
+ termhdr->layer_etype = (LAYER_MPA << 4) | DDP_LLP;
+ termhdr->error_code = MPA_MARKER;
+ break;
+ case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_MPA << 4) | DDP_LLP;
+ termhdr->error_code = MPA_CRC;
+ break;
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_LARGE:
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_SMALL:
+ flush_code = IB_WC_LOC_LEN_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_CATASTROPHIC;
+ termhdr->error_code = DDP_CATASTROPHIC_LOCAL;
+ break;
+ case NES_AEQE_AEID_DDP_LCE_LOCAL_CATASTROPHIC:
+ case NES_AEQE_AEID_DDP_NO_L_BIT:
+ flush_code = IB_WC_FATAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_CATASTROPHIC;
+ termhdr->error_code = DDP_CATASTROPHIC_LOCAL;
+ break;
+ case NES_AEQE_AEID_DDP_INVALID_MSN_GAP_IN_MSN:
+ case NES_AEQE_AEID_DDP_INVALID_MSN_RANGE_IS_NOT_VALID:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_MSN_RANGE;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
+ flush_code = IB_WC_LOC_LEN_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_TOO_LONG;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_DDP_VERSION:
+ flush_code = IB_WC_GENERAL_ERR;
+ if (is_tagged) {
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_TAGGED_BUFFER;
+ termhdr->error_code = DDP_TAGGED_INV_DDP_VER;
+ } else {
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_DDP_VER;
+ }
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MO:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_MO;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
+ flush_code = IB_WC_REM_OP_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_MSN_NO_BUF;
+ break;
+ case NES_AEQE_AEID_DDP_UBE_INVALID_QN:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_DDP << 4) | DDP_UNTAGGED_BUFFER;
+ termhdr->error_code = DDP_UNTAGGED_INV_QN;
+ break;
+ case NES_AEQE_AEID_RDMAP_ROE_INVALID_RDMAP_VERSION:
+ flush_code = IB_WC_GENERAL_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_INV_RDMAP_VER;
+ break;
+ case NES_AEQE_AEID_RDMAP_ROE_UNEXPECTED_OPCODE:
+ flush_code = IB_WC_LOC_QP_OP_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_UNEXPECTED_OP;
+ break;
+ default:
+ flush_code = IB_WC_FATAL_ERR;
+ termhdr->layer_etype = (LAYER_RDMA << 4) | RDMAP_REMOTE_OP;
+ termhdr->error_code = RDMAP_UNSPECIFIED;
+ break;
+ }
+
+ if (copy_len)
+ memcpy(termhdr + 1, pkt, copy_len);
+
+ if ((flush_code) && ((NES_AEQE_INBOUND_RDMA & aeq_info) == 0)) {
+ if (aeq_info & NES_AEQE_SQ)
+ nesqp->term_sq_flush_code = flush_code;
+ else
+ nesqp->term_rq_flush_code = flush_code;
+ }
+
+ return sizeof(struct nes_terminate_hdr) + copy_len;
+}
+
+static void nes_terminate_connection(struct nes_device *nesdev, struct nes_qp *nesqp,
+ struct nes_hw_aeqe *aeqe, enum ib_event_type eventtype)
+{
+ u64 context;
+ unsigned long flags;
+ u32 aeq_info;
+ u16 async_event_id;
+ u8 tcp_state;
+ u8 iwarp_state;
+ u32 termlen = 0;
+ u32 mod_qp_flags = NES_CQP_QP_IWARP_STATE_TERMINATE |
+ NES_CQP_QP_TERM_DONT_SEND_FIN;
+ struct nes_adapter *nesadapter = nesdev->nesadapter;
+
+ if (nesqp->term_flags & NES_TERM_SENT)
+ return; /* Sanity check */
+
+ aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
+ tcp_state = (aeq_info & NES_AEQE_TCP_STATE_MASK) >> NES_AEQE_TCP_STATE_SHIFT;
+ iwarp_state = (aeq_info & NES_AEQE_IWARP_STATE_MASK) >> NES_AEQE_IWARP_STATE_SHIFT;
+ async_event_id = (u16)aeq_info;
+
+ context = (unsigned long)nesadapter->qp_table[le32_to_cpu(
+ aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]) - NES_FIRST_QPN];
+ if (!context) {
+ WARN_ON(!context);
+ return;
+ }
+
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ spin_lock_irqsave(&nesqp->lock, flags);
+ nesqp->hw_iwarp_state = iwarp_state;
+ nesqp->hw_tcp_state = tcp_state;
+ nesqp->last_aeq = async_event_id;
+ nesqp->terminate_eventtype = eventtype;
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ if (nesadapter->send_term_ok)
+ termlen = nes_bld_terminate_hdr(nesqp, async_event_id, aeq_info);
+ else
+ mod_qp_flags |= NES_CQP_QP_TERM_DONT_SEND_TERM_MSG;
+
+ nes_terminate_start_timer(nesqp);
+ nesqp->term_flags |= NES_TERM_SENT;
+ nes_hw_modify_qp(nesdev, nesqp, mod_qp_flags, termlen, 0);
+}
+
+static void nes_terminate_send_fin(struct nes_device *nesdev,
+ struct nes_qp *nesqp, struct nes_hw_aeqe *aeqe)
+{
+ u32 aeq_info;
+ u16 async_event_id;
+ u8 tcp_state;
+ u8 iwarp_state;
+ unsigned long flags;
+
+ aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
+ tcp_state = (aeq_info & NES_AEQE_TCP_STATE_MASK) >> NES_AEQE_TCP_STATE_SHIFT;
+ iwarp_state = (aeq_info & NES_AEQE_IWARP_STATE_MASK) >> NES_AEQE_IWARP_STATE_SHIFT;
+ async_event_id = (u16)aeq_info;
+
+ spin_lock_irqsave(&nesqp->lock, flags);
+ nesqp->hw_iwarp_state = iwarp_state;
+ nesqp->hw_tcp_state = tcp_state;
+ nesqp->last_aeq = async_event_id;
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ /* Send the fin only */
+ nes_hw_modify_qp(nesdev, nesqp, NES_CQP_QP_IWARP_STATE_TERMINATE |
+ NES_CQP_QP_TERM_DONT_SEND_TERM_MSG, 0, 0);
+}
+
+/* Cleanup after a terminate sent or received */
+static void nes_terminate_done(struct nes_qp *nesqp, int timeout_occurred)
+{
+ u32 next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR;
+ unsigned long flags;
+ struct nes_vnic *nesvnic = to_nesvnic(nesqp->ibqp.device);
+ struct nes_device *nesdev = nesvnic->nesdev;
+ u8 first_time = 0;
+
+ spin_lock_irqsave(&nesqp->lock, flags);
+ if (nesqp->hte_added) {
+ nesqp->hte_added = 0;
+ next_iwarp_state |= NES_CQP_QP_DEL_HTE;
+ }
+
+ first_time = (nesqp->term_flags & NES_TERM_DONE) == 0;
+ nesqp->term_flags |= NES_TERM_DONE;
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ /* Make sure we go through this only once */
+ if (first_time) {
+ if (timeout_occurred == 0)
+ del_timer(&nesqp->terminate_timer);
+ else
+ next_iwarp_state |= NES_CQP_QP_RESET;
+
+ nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 0);
+ nes_cm_disconn(nesqp);
+ }
+}
+
+static void nes_terminate_received(struct nes_device *nesdev,
+ struct nes_qp *nesqp, struct nes_hw_aeqe *aeqe)
+{
+ u32 aeq_info;
+ u8 *pkt;
+ u32 *mpa;
+ u8 ddp_ctl;
+ u8 rdma_ctl;
+ u16 aeq_id = 0;
+
+ aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
+ if (aeq_info & NES_AEQE_Q2_DATA_WRITTEN) {
+ /* Terminate is not a performance path so the silicon */
+ /* did not validate the frame - do it now */
+ pkt = nesqp->hwqp.q2_vbase + BAD_FRAME_OFFSET;
+ mpa = (u32 *)locate_mpa(pkt, aeq_info);
+ ddp_ctl = (be32_to_cpu(mpa[0]) >> 8) & 0xff;
+ rdma_ctl = be32_to_cpu(mpa[0]) & 0xff;
+ if ((ddp_ctl & 0xc0) != 0x40)
+ aeq_id = NES_AEQE_AEID_DDP_LCE_LOCAL_CATASTROPHIC;
+ else if ((ddp_ctl & 0x03) != 1)
+ aeq_id = NES_AEQE_AEID_DDP_UBE_INVALID_DDP_VERSION;
+ else if (be32_to_cpu(mpa[2]) != 2)
+ aeq_id = NES_AEQE_AEID_DDP_UBE_INVALID_QN;
+ else if (be32_to_cpu(mpa[3]) != 1)
+ aeq_id = NES_AEQE_AEID_DDP_INVALID_MSN_GAP_IN_MSN;
+ else if (be32_to_cpu(mpa[4]) != 0)
+ aeq_id = NES_AEQE_AEID_DDP_UBE_INVALID_MO;
+ else if ((rdma_ctl & 0xc0) != 0x40)
+ aeq_id = NES_AEQE_AEID_RDMAP_ROE_INVALID_RDMAP_VERSION;
+
+ if (aeq_id) {
+ /* Bad terminate recvd - send back a terminate */
+ aeq_info = (aeq_info & 0xffff0000) | aeq_id;
+ aeqe->aeqe_words[NES_AEQE_MISC_IDX] = cpu_to_le32(aeq_info);
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
+ return;
+ }
+ }
+
+ nesqp->term_flags |= NES_TERM_RCVD;
+ nesqp->terminate_eventtype = IB_EVENT_QP_FATAL;
+ nes_terminate_start_timer(nesqp);
+ nes_terminate_send_fin(nesdev, nesqp, aeqe);
+}
+
+/* Timeout routine in case terminate fails to complete */
+static void nes_terminate_timeout(unsigned long context)
+{
+ struct nes_qp *nesqp = (struct nes_qp *)(unsigned long)context;
+
+ nes_terminate_done(nesqp, 1);
+}
+
+/* Set a timer in case hw cannot complete the terminate sequence */
+static void nes_terminate_start_timer(struct nes_qp *nesqp)
+{
+ init_timer(&nesqp->terminate_timer);
+ nesqp->terminate_timer.function = nes_terminate_timeout;
+ nesqp->terminate_timer.expires = jiffies + HZ;
+ nesqp->terminate_timer.data = (unsigned long)nesqp;
+ add_timer(&nesqp->terminate_timer);
+}
+
/**
* nes_process_iwarp_aeqe
*/
@@ -2910,28 +3323,27 @@
struct nes_hw_aeqe *aeqe)
{
u64 context;
- u64 aeqe_context = 0;
unsigned long flags;
struct nes_qp *nesqp;
+ struct nes_hw_cq *hw_cq;
+ struct nes_cq *nescq;
int resource_allocated;
- /* struct iw_cm_id *cm_id; */
struct nes_adapter *nesadapter = nesdev->nesadapter;
- struct ib_event ibevent;
- /* struct iw_cm_event cm_event; */
u32 aeq_info;
u32 next_iwarp_state = 0;
u16 async_event_id;
u8 tcp_state;
u8 iwarp_state;
+ int must_disconn = 1;
+ int must_terminate = 0;
+ struct ib_event ibevent;
nes_debug(NES_DBG_AEQ, "\n");
aeq_info = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_MISC_IDX]);
- if ((NES_AEQE_INBOUND_RDMA&aeq_info) || (!(NES_AEQE_QP&aeq_info))) {
+ if ((NES_AEQE_INBOUND_RDMA & aeq_info) || (!(NES_AEQE_QP & aeq_info))) {
context = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_LOW_IDX]);
context += ((u64)le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_HIGH_IDX])) << 32;
} else {
- aeqe_context = le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_LOW_IDX]);
- aeqe_context += ((u64)le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_CTXT_HIGH_IDX])) << 32;
context = (unsigned long)nesadapter->qp_table[le32_to_cpu(
aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]) - NES_FIRST_QPN];
BUG_ON(!context);
@@ -2948,7 +3360,11 @@
switch (async_event_id) {
case NES_AEQE_AEID_LLP_FIN_RECEIVED:
- nesqp = *((struct nes_qp **)&context);
+ nesqp = (struct nes_qp *)(unsigned long)context;
+
+ if (nesqp->term_flags)
+ return; /* Ignore it, wait for close complete */
+
if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
nesqp->cm_id->add_ref(nesqp->cm_id);
schedule_nes_timer(nesqp->cm_node, (struct sk_buff *)nesqp,
@@ -2959,18 +3375,24 @@
nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
async_event_id, nesqp->last_aeq, tcp_state);
}
+
if ((tcp_state != NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
(nesqp->ibqp_state != IB_QPS_RTS)) {
/* FIN Received but tcp state or IB state moved on,
should expect a close complete */
return;
}
+
case NES_AEQE_AEID_LLP_CLOSE_COMPLETE:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ if (nesqp->term_flags) {
+ nes_terminate_done(nesqp, 0);
+ return;
+ }
+
case NES_AEQE_AEID_LLP_CONNECTION_RESET:
- case NES_AEQE_AEID_TERMINATE_SENT:
- case NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE:
case NES_AEQE_AEID_RESET_SENT:
- nesqp = *((struct nes_qp **)&context);
+ nesqp = (struct nes_qp *)(unsigned long)context;
if (async_event_id == NES_AEQE_AEID_RESET_SENT) {
tcp_state = NES_AEQE_TCP_STATE_CLOSED;
}
@@ -2982,12 +3404,7 @@
if ((tcp_state == NES_AEQE_TCP_STATE_CLOSED) ||
(tcp_state == NES_AEQE_TCP_STATE_TIME_WAIT)) {
nesqp->hte_added = 0;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u to remove hte\n",
- nesqp->hwqp.qp_id);
- nes_hw_modify_qp(nesdev, nesqp,
- NES_CQP_QP_IWARP_STATE_ERROR | NES_CQP_QP_DEL_HTE, 0);
- spin_lock_irqsave(&nesqp->lock, flags);
+ next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR | NES_CQP_QP_DEL_HTE;
}
if ((nesqp->ibqp_state == IB_QPS_RTS) &&
@@ -2999,151 +3416,106 @@
nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_CLOSING;
break;
case NES_AEQE_IWARP_STATE_TERMINATE:
- next_iwarp_state = NES_CQP_QP_IWARP_STATE_TERMINATE;
- nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_TERMINATE;
- if (async_event_id == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) {
- next_iwarp_state |= 0x02000000;
- nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
- }
+ must_disconn = 0; /* terminate path takes care of disconn */
+ if (nesqp->term_flags == 0)
+ must_terminate = 1;
break;
- default:
- next_iwarp_state = 0;
}
- spin_unlock_irqrestore(&nesqp->lock, flags);
- if (next_iwarp_state) {
- nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X,"
- " also added another reference\n",
- nesqp->hwqp.qp_id, next_iwarp_state);
- nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0);
- }
- nes_cm_disconn(nesqp);
} else {
if (async_event_id == NES_AEQE_AEID_LLP_FIN_RECEIVED) {
/* FIN Received but ib state not RTS,
close complete will be on its way */
- spin_unlock_irqrestore(&nesqp->lock, flags);
- return;
+ must_disconn = 0;
}
- spin_unlock_irqrestore(&nesqp->lock, flags);
- if (async_event_id == NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE) {
- next_iwarp_state = NES_CQP_QP_IWARP_STATE_TERMINATE | 0x02000000;
- nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
- nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X,"
- " also added another reference\n",
- nesqp->hwqp.qp_id, next_iwarp_state);
- nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0);
+ }
+ spin_unlock_irqrestore(&nesqp->lock, flags);
+
+ if (must_terminate)
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
+ else if (must_disconn) {
+ if (next_iwarp_state) {
+ nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X\n",
+ nesqp->hwqp.qp_id, next_iwarp_state);
+ nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 0);
}
nes_cm_disconn(nesqp);
}
break;
+
+ case NES_AEQE_AEID_TERMINATE_SENT:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_send_fin(nesdev, nesqp, aeqe);
+ break;
+
case NES_AEQE_AEID_LLP_TERMINATE_RECEIVED:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_TERMINATE_RECEIVED"
- " event on QP%u \n Q2 Data:\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
- ((nesqp->ibqp_state == IB_QPS_RTS)&&
- (async_event_id == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
- nes_cm_disconn(nesqp);
- } else {
- nesqp->in_disconnect = 0;
- wake_up(&nesqp->kick_waitq);
- }
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_received(nesdev, nesqp, aeqe);
break;
- case NES_AEQE_AEID_LLP_TOO_MANY_RETRIES:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_ERROR;
- nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
- nesqp->last_aeq = async_event_id;
- if (nesqp->cm_id) {
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_TOO_MANY_RETRIES"
- " event on QP%u, remote IP = 0x%08X \n",
- nesqp->hwqp.qp_id,
- ntohl(nesqp->cm_id->remote_addr.sin_addr.s_addr));
- } else {
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_TOO_MANY_RETRIES"
- " event on QP%u \n",
- nesqp->hwqp.qp_id);
- }
- spin_unlock_irqrestore(&nesqp->lock, flags);
- next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR | NES_CQP_QP_RESET;
- nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- break;
+
+ case NES_AEQE_AEID_AMP_BAD_STAG_KEY:
case NES_AEQE_AEID_AMP_BAD_STAG_INDEX:
- if (NES_AEQE_INBOUND_RDMA&aeq_info) {
- nesqp = nesadapter->qp_table[le32_to_cpu(
- aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX])-NES_FIRST_QPN];
- } else {
- /* TODO: get the actual WQE and mask off wqe index */
- context &= ~((u64)511);
- nesqp = *((struct nes_qp **)&context);
- }
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_AMP_BAD_STAG_INDEX event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- break;
case NES_AEQE_AEID_AMP_UNALLOCATED_STAG:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_AMP_UNALLOCATED_STAG event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- break;
+ case NES_AEQE_AEID_AMP_INVALID_STAG:
+ case NES_AEQE_AEID_AMP_RIGHTS_VIOLATION:
+ case NES_AEQE_AEID_AMP_INVALIDATE_NO_REMOTE_ACCESS_RIGHTS:
case NES_AEQE_AEID_PRIV_OPERATION_DENIED:
- nesqp = nesadapter->qp_table[le32_to_cpu(aeqe->aeqe_words
- [NES_AEQE_COMP_QP_CQ_ID_IDX])-NES_FIRST_QPN];
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_PRIV_OPERATION_DENIED event on QP%u,"
- " nesqp = %p, AE reported %p\n",
- nesqp->hwqp.qp_id, nesqp, *((struct nes_qp **)&context));
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
+ case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
+ case NES_AEQE_AEID_AMP_BOUNDS_VIOLATION:
+ case NES_AEQE_AEID_AMP_TO_WRAP:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_ACCESS_ERR);
break;
+
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_LARGE:
+ case NES_AEQE_AEID_LLP_SEGMENT_TOO_SMALL:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MO:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_QN:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ if (iwarp_opcode(nesqp, aeq_info) > IWARP_OPCODE_TERM) {
+ aeq_info &= 0xffff0000;
+ aeq_info |= NES_AEQE_AEID_RDMAP_ROE_UNEXPECTED_OPCODE;
+ aeqe->aeqe_words[NES_AEQE_MISC_IDX] = cpu_to_le32(aeq_info);
+ }
+
+ case NES_AEQE_AEID_RDMAP_ROE_BAD_LLP_CLOSE:
+ case NES_AEQE_AEID_LLP_TOO_MANY_RETRIES:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
+ case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
+ case NES_AEQE_AEID_AMP_BAD_QP:
+ case NES_AEQE_AEID_LLP_RECEIVED_MARKER_AND_LENGTH_FIELDS_DONT_MATCH:
+ case NES_AEQE_AEID_DDP_LCE_LOCAL_CATASTROPHIC:
+ case NES_AEQE_AEID_DDP_NO_L_BIT:
+ case NES_AEQE_AEID_DDP_INVALID_MSN_GAP_IN_MSN:
+ case NES_AEQE_AEID_DDP_INVALID_MSN_RANGE_IS_NOT_VALID:
+ case NES_AEQE_AEID_DDP_UBE_INVALID_DDP_VERSION:
+ case NES_AEQE_AEID_RDMAP_ROE_INVALID_RDMAP_VERSION:
+ case NES_AEQE_AEID_RDMAP_ROE_UNEXPECTED_OPCODE:
+ case NES_AEQE_AEID_AMP_BAD_PD:
+ case NES_AEQE_AEID_AMP_FASTREG_SHARED:
+ case NES_AEQE_AEID_AMP_FASTREG_VALID_STAG:
+ case NES_AEQE_AEID_AMP_FASTREG_MW_STAG:
+ case NES_AEQE_AEID_AMP_FASTREG_INVALID_RIGHTS:
+ case NES_AEQE_AEID_AMP_FASTREG_PBL_TABLE_OVERFLOW:
+ case NES_AEQE_AEID_AMP_FASTREG_INVALID_LENGTH:
+ case NES_AEQE_AEID_AMP_INVALIDATE_SHARED:
+ case NES_AEQE_AEID_AMP_INVALIDATE_MR_WITH_BOUND_WINDOWS:
+ case NES_AEQE_AEID_AMP_MWBIND_VALID_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_OF_MR_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_TO_ZERO_BASED_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_TO_MW_STAG:
+ case NES_AEQE_AEID_AMP_MWBIND_INVALID_RIGHTS:
+ case NES_AEQE_AEID_AMP_MWBIND_INVALID_BOUNDS:
+ case NES_AEQE_AEID_AMP_MWBIND_TO_INVALID_PARENT:
+ case NES_AEQE_AEID_AMP_MWBIND_BIND_DISABLED:
+ case NES_AEQE_AEID_BAD_CLOSE:
+ case NES_AEQE_AEID_RDMA_READ_WHILE_ORD_ZERO:
+ case NES_AEQE_AEID_STAG_ZERO_INVALID:
+ case NES_AEQE_AEID_ROE_INVALID_RDMA_READ_REQUEST:
+ case NES_AEQE_AEID_ROE_INVALID_RDMA_WRITE_OR_READ_RESP:
+ nesqp = (struct nes_qp *)(unsigned long)context;
+ nes_terminate_connection(nesdev, nesqp, aeqe, IB_EVENT_QP_FATAL);
+ break;
+
case NES_AEQE_AEID_CQ_OPERATION_ERROR:
context <<= 1;
nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_CQ_OPERATION_ERROR event on CQ%u, %p\n",
@@ -3153,83 +3525,19 @@
if (resource_allocated) {
printk(KERN_ERR PFX "%s: Processing an NES_AEQE_AEID_CQ_OPERATION_ERROR event on CQ%u\n",
__func__, le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]));
+ hw_cq = (struct nes_hw_cq *)(unsigned long)context;
+ if (hw_cq) {
+ nescq = container_of(hw_cq, struct nes_cq, hw_cq);
+ if (nescq->ibcq.event_handler) {
+ ibevent.device = nescq->ibcq.device;
+ ibevent.event = IB_EVENT_CQ_ERR;
+ ibevent.element.cq = &nescq->ibcq;
+ nescq->ibcq.event_handler(&ibevent, nescq->ibcq.cq_context);
+ }
+ }
}
break;
- case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
- nesqp = nesadapter->qp_table[le32_to_cpu(
- aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX])-NES_FIRST_QPN];
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG"
- "_FOR_AVAILABLE_BUFFER event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- /* tell cm to disconnect, cm will queue work to thread */
- nes_cm_disconn(nesqp);
- break;
- case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_DDP_UBE_INVALID_MSN"
- "_NO_BUFFER_AVAILABLE event on QP%u\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- /* tell cm to disconnect, cm will queue work to thread */
- nes_cm_disconn(nesqp);
- break;
- case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- nes_debug(NES_DBG_AEQ, "Processing an NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR"
- " event on QP%u \n Q2 Data:\n",
- nesqp->hwqp.qp_id);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_FATAL;
- nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
- }
- /* tell cm to disconnect, cm will queue work to thread */
- nes_cm_disconn(nesqp);
- break;
- /* TODO: additional AEs need to be here */
- case NES_AEQE_AEID_AMP_BOUNDS_VIOLATION:
- nesqp = *((struct nes_qp **)&context);
- spin_lock_irqsave(&nesqp->lock, flags);
- nesqp->hw_iwarp_state = iwarp_state;
- nesqp->hw_tcp_state = tcp_state;
- nesqp->last_aeq = async_event_id;
- spin_unlock_irqrestore(&nesqp->lock, flags);
- if (nesqp->ibqp.event_handler) {
- ibevent.device = nesqp->ibqp.device;
- ibevent.element.qp = &nesqp->ibqp;
- ibevent.event = IB_EVENT_QP_ACCESS_ERR;
- nesqp->ibqp.event_handler(&ibevent,
- nesqp->ibqp.qp_context);
- }
- nes_cm_disconn(nesqp);
- break;
+
default:
nes_debug(NES_DBG_AEQ, "Processing an iWARP related AE for QP, misc = 0x%04X\n",
async_event_id);
@@ -3238,7 +3546,6 @@
}
-
/**
* nes_iwarp_ce_handler
*/
@@ -3373,6 +3680,8 @@
{
struct nes_cqp_request *cqp_request;
struct nes_hw_cqp_wqe *cqp_wqe;
+ u32 sq_code = (NES_IWARP_CQE_MAJOR_FLUSH << 16) | NES_IWARP_CQE_MINOR_FLUSH;
+ u32 rq_code = (NES_IWARP_CQE_MAJOR_FLUSH << 16) | NES_IWARP_CQE_MINOR_FLUSH;
int ret;
cqp_request = nes_get_cqp_request(nesdev);
@@ -3389,6 +3698,24 @@
cqp_wqe = &cqp_request->cqp_wqe;
nes_fill_init_cqp_wqe(cqp_wqe, nesdev);
+ /* If wqe in error was identified, set code to be put into cqe */
+ if ((nesqp->term_sq_flush_code) && (which_wq & NES_CQP_FLUSH_SQ)) {
+ which_wq |= NES_CQP_FLUSH_MAJ_MIN;
+ sq_code = (CQE_MAJOR_DRV << 16) | nesqp->term_sq_flush_code;
+ nesqp->term_sq_flush_code = 0;
+ }
+
+ if ((nesqp->term_rq_flush_code) && (which_wq & NES_CQP_FLUSH_RQ)) {
+ which_wq |= NES_CQP_FLUSH_MAJ_MIN;
+ rq_code = (CQE_MAJOR_DRV << 16) | nesqp->term_rq_flush_code;
+ nesqp->term_rq_flush_code = 0;
+ }
+
+ if (which_wq & NES_CQP_FLUSH_MAJ_MIN) {
+ cqp_wqe->wqe_words[NES_CQP_QP_WQE_FLUSH_SQ_CODE] = cpu_to_le32(sq_code);
+ cqp_wqe->wqe_words[NES_CQP_QP_WQE_FLUSH_RQ_CODE] = cpu_to_le32(rq_code);
+ }
+
cqp_wqe->wqe_words[NES_CQP_WQE_OPCODE_IDX] =
cpu_to_le32(NES_CQP_FLUSH_WQES | which_wq);
cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX] = cpu_to_le32(nesqp->hwqp.qp_id);
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index c3654c6..f28a41b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -241,6 +241,7 @@
};
#define NES_CQP_OP_IWARP_STATE_SHIFT 28
+#define NES_CQP_OP_TERMLEN_SHIFT 28
enum nes_cqp_qp_bits {
NES_CQP_QP_ARP_VALID = (1<<8),
@@ -265,12 +266,16 @@
NES_CQP_QP_IWARP_STATE_TERMINATE = (5<<NES_CQP_OP_IWARP_STATE_SHIFT),
NES_CQP_QP_IWARP_STATE_ERROR = (6<<NES_CQP_OP_IWARP_STATE_SHIFT),
NES_CQP_QP_IWARP_STATE_MASK = (7<<NES_CQP_OP_IWARP_STATE_SHIFT),
+ NES_CQP_QP_TERM_DONT_SEND_FIN = (1<<24),
+ NES_CQP_QP_TERM_DONT_SEND_TERM_MSG = (1<<25),
NES_CQP_QP_RESET = (1<<31),
};
enum nes_cqp_qp_wqe_word_idx {
NES_CQP_QP_WQE_CONTEXT_LOW_IDX = 6,
NES_CQP_QP_WQE_CONTEXT_HIGH_IDX = 7,
+ NES_CQP_QP_WQE_FLUSH_SQ_CODE = 8,
+ NES_CQP_QP_WQE_FLUSH_RQ_CODE = 9,
NES_CQP_QP_WQE_NEW_MSS_IDX = 15,
};
@@ -361,6 +366,7 @@
enum nes_cqp_flush_bits {
NES_CQP_FLUSH_SQ = (1<<30),
NES_CQP_FLUSH_RQ = (1<<31),
+ NES_CQP_FLUSH_MAJ_MIN = (1<<28),
};
enum nes_cqe_opcode_bits {
@@ -633,11 +639,14 @@
NES_AEQE_INBOUND_RDMA = (1<<19),
NES_AEQE_IWARP_STATE_MASK = (7<<20),
NES_AEQE_TCP_STATE_MASK = (0xf<<24),
+ NES_AEQE_Q2_DATA_WRITTEN = (0x3<<28),
NES_AEQE_VALID = (1<<31),
};
#define NES_AEQE_IWARP_STATE_SHIFT 20
#define NES_AEQE_TCP_STATE_SHIFT 24
+#define NES_AEQE_Q2_DATA_ETHERNET (1<<28)
+#define NES_AEQE_Q2_DATA_MPA (1<<29)
enum nes_aeqe_iwarp_state {
NES_AEQE_IWARP_STATE_NON_EXISTANT = 0,
@@ -751,6 +760,15 @@
NES_IWARP_SQ_OP_NOP = 12,
};
+enum nes_iwarp_cqe_major_code {
+ NES_IWARP_CQE_MAJOR_FLUSH = 1,
+ NES_IWARP_CQE_MAJOR_DRV = 0x8000
+};
+
+enum nes_iwarp_cqe_minor_code {
+ NES_IWARP_CQE_MINOR_FLUSH = 1
+};
+
#define NES_EEPROM_READ_REQUEST (1<<16)
#define NES_MAC_ADDR_VALID (1<<20)
@@ -1119,6 +1137,7 @@
u8 netdev_max; /* from host nic address count in EEPROM */
u8 port_count;
u8 virtwq;
+ u8 send_term_ok;
u8 et_use_adaptive_rx_coalesce;
u8 adapter_fcn_count;
u8 pft_mcast_map[NES_PFT_SIZE];
@@ -1217,6 +1236,90 @@
u32 num_pd;
};
+enum nes_hdrct_flags {
+ DDP_LEN_FLAG = 0x80,
+ DDP_HDR_FLAG = 0x40,
+ RDMA_HDR_FLAG = 0x20
+};
+
+enum nes_term_layers {
+ LAYER_RDMA = 0,
+ LAYER_DDP = 1,
+ LAYER_MPA = 2
+};
+
+enum nes_term_error_types {
+ RDMAP_CATASTROPHIC = 0,
+ RDMAP_REMOTE_PROT = 1,
+ RDMAP_REMOTE_OP = 2,
+ DDP_CATASTROPHIC = 0,
+ DDP_TAGGED_BUFFER = 1,
+ DDP_UNTAGGED_BUFFER = 2,
+ DDP_LLP = 3
+};
+
+enum nes_term_rdma_errors {
+ RDMAP_INV_STAG = 0x00,
+ RDMAP_INV_BOUNDS = 0x01,
+ RDMAP_ACCESS = 0x02,
+ RDMAP_UNASSOC_STAG = 0x03,
+ RDMAP_TO_WRAP = 0x04,
+ RDMAP_INV_RDMAP_VER = 0x05,
+ RDMAP_UNEXPECTED_OP = 0x06,
+ RDMAP_CATASTROPHIC_LOCAL = 0x07,
+ RDMAP_CATASTROPHIC_GLOBAL = 0x08,
+ RDMAP_CANT_INV_STAG = 0x09,
+ RDMAP_UNSPECIFIED = 0xff
+};
+
+enum nes_term_ddp_errors {
+ DDP_CATASTROPHIC_LOCAL = 0x00,
+ DDP_TAGGED_INV_STAG = 0x00,
+ DDP_TAGGED_BOUNDS = 0x01,
+ DDP_TAGGED_UNASSOC_STAG = 0x02,
+ DDP_TAGGED_TO_WRAP = 0x03,
+ DDP_TAGGED_INV_DDP_VER = 0x04,
+ DDP_UNTAGGED_INV_QN = 0x01,
+ DDP_UNTAGGED_INV_MSN_NO_BUF = 0x02,
+ DDP_UNTAGGED_INV_MSN_RANGE = 0x03,
+ DDP_UNTAGGED_INV_MO = 0x04,
+ DDP_UNTAGGED_INV_TOO_LONG = 0x05,
+ DDP_UNTAGGED_INV_DDP_VER = 0x06
+};
+
+enum nes_term_mpa_errors {
+ MPA_CLOSED = 0x01,
+ MPA_CRC = 0x02,
+ MPA_MARKER = 0x03,
+ MPA_REQ_RSP = 0x04,
+};
+
+struct nes_terminate_hdr {
+ u8 layer_etype;
+ u8 error_code;
+ u8 hdrct;
+ u8 rsvd;
+};
+
+/* Used to determine how to fill in terminate error codes */
+#define IWARP_OPCODE_WRITE 0
+#define IWARP_OPCODE_READREQ 1
+#define IWARP_OPCODE_READRSP 2
+#define IWARP_OPCODE_SEND 3
+#define IWARP_OPCODE_SEND_INV 4
+#define IWARP_OPCODE_SEND_SE 5
+#define IWARP_OPCODE_SEND_SE_INV 6
+#define IWARP_OPCODE_TERM 7
+
+/* These values are used only during terminate processing */
+#define TERM_DDP_LEN_TAGGED 14
+#define TERM_DDP_LEN_UNTAGGED 18
+#define TERM_RDMA_LEN 28
+#define RDMA_OPCODE_MASK 0x0f
+#define RDMA_READ_REQ_OPCODE 1
+#define BAD_FRAME_OFFSET 64
+#define CQE_MAJOR_DRV 0x8000
+
#define nes_vlan_rx vlan_hwaccel_receive_skb
#define nes_netif_rx netif_receive_skb
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index c6e6611..538e409 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1508,7 +1508,7 @@
}
-static struct ethtool_ops nes_ethtool_ops = {
+static const struct ethtool_ops nes_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_settings = nes_netdev_get_settings,
.set_settings = nes_netdev_set_settings,
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index a282031..9687c39 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -183,6 +183,9 @@
} else if (((major_ver == 2) && (minor_ver > 21)) || ((major_ver > 2) && (major_ver != 255))) {
nesadapter->virtwq = 1;
}
+ if (((major_ver == 3) && (minor_ver >= 16)) || (major_ver > 3))
+ nesadapter->send_term_ok = 1;
+
nesadapter->firmware_version = (((u32)(u8)(eeprom_data>>8)) << 16) +
(u32)((u8)eeprom_data);
@@ -548,7 +551,7 @@
spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
}
if (cqp_request == NULL) {
- cqp_request = kzalloc(sizeof(struct nes_cqp_request), GFP_KERNEL);
+ cqp_request = kzalloc(sizeof(struct nes_cqp_request), GFP_ATOMIC);
if (cqp_request) {
cqp_request->dynamic = 1;
INIT_LIST_HEAD(&cqp_request->list);
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 21e0fd3..a680c42 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -667,15 +667,32 @@
*/
static int nes_query_port(struct ib_device *ibdev, u8 port, struct ib_port_attr *props)
{
+ struct nes_vnic *nesvnic = to_nesvnic(ibdev);
+ struct net_device *netdev = nesvnic->netdev;
+
memset(props, 0, sizeof(*props));
- props->max_mtu = IB_MTU_2048;
- props->active_mtu = IB_MTU_2048;
+ props->max_mtu = IB_MTU_4096;
+
+ if (netdev->mtu >= 4096)
+ props->active_mtu = IB_MTU_4096;
+ else if (netdev->mtu >= 2048)
+ props->active_mtu = IB_MTU_2048;
+ else if (netdev->mtu >= 1024)
+ props->active_mtu = IB_MTU_1024;
+ else if (netdev->mtu >= 512)
+ props->active_mtu = IB_MTU_512;
+ else
+ props->active_mtu = IB_MTU_256;
+
props->lid = 1;
props->lmc = 0;
props->sm_lid = 0;
props->sm_sl = 0;
- props->state = IB_PORT_ACTIVE;
+ if (nesvnic->linkup)
+ props->state = IB_PORT_ACTIVE;
+ else
+ props->state = IB_PORT_DOWN;
props->phys_state = 0;
props->port_cap_flags = IB_PORT_CM_SUP | IB_PORT_REINIT_SUP |
IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP;
@@ -1506,12 +1523,45 @@
/**
+ * nes_clean_cq
+ */
+static void nes_clean_cq(struct nes_qp *nesqp, struct nes_cq *nescq)
+{
+ u32 cq_head;
+ u32 lo;
+ u32 hi;
+ u64 u64temp;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&nescq->lock, flags);
+
+ cq_head = nescq->hw_cq.cq_head;
+ while (le32_to_cpu(nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_OPCODE_IDX]) & NES_CQE_VALID) {
+ rmb();
+ lo = le32_to_cpu(nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
+ hi = le32_to_cpu(nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX]);
+ u64temp = (((u64)hi) << 32) | ((u64)lo);
+ u64temp &= ~(NES_SW_CONTEXT_ALIGN-1);
+ if (u64temp == (u64)(unsigned long)nesqp) {
+ /* Zero the context value so cqe will be ignored */
+ nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX] = 0;
+ nescq->hw_cq.cq_vbase[cq_head].cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX] = 0;
+ }
+
+ if (++cq_head >= nescq->hw_cq.cq_size)
+ cq_head = 0;
+ }
+
+ spin_unlock_irqrestore(&nescq->lock, flags);
+}
+
+
+/**
* nes_destroy_qp
*/
static int nes_destroy_qp(struct ib_qp *ibqp)
{
struct nes_qp *nesqp = to_nesqp(ibqp);
- /* struct nes_vnic *nesvnic = to_nesvnic(ibqp->device); */
struct nes_ucontext *nes_ucontext;
struct ib_qp_attr attr;
struct iw_cm_id *cm_id;
@@ -1548,7 +1598,6 @@
nes_debug(NES_DBG_QP, "OFA CM event_handler returned, ret=%d\n", ret);
}
-
if (nesqp->user_mode) {
if ((ibqp->uobject)&&(ibqp->uobject->context)) {
nes_ucontext = to_nesucontext(ibqp->uobject->context);
@@ -1560,6 +1609,13 @@
}
if (nesqp->pbl_pbase)
kunmap(nesqp->page);
+ } else {
+ /* Clean any pending completions from the cq(s) */
+ if (nesqp->nesscq)
+ nes_clean_cq(nesqp, nesqp->nesscq);
+
+ if ((nesqp->nesrcq) && (nesqp->nesrcq != nesqp->nesscq))
+ nes_clean_cq(nesqp, nesqp->nesrcq);
}
nes_rem_ref(&nesqp->ibqp);
@@ -2884,7 +2940,7 @@
* nes_hw_modify_qp
*/
int nes_hw_modify_qp(struct nes_device *nesdev, struct nes_qp *nesqp,
- u32 next_iwarp_state, u32 wait_completion)
+ u32 next_iwarp_state, u32 termlen, u32 wait_completion)
{
struct nes_hw_cqp_wqe *cqp_wqe;
/* struct iw_cm_id *cm_id = nesqp->cm_id; */
@@ -2916,6 +2972,13 @@
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX, nesqp->hwqp.qp_id);
set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, (u64)nesqp->nesqp_context_pbase);
+ /* If sending a terminate message, fill in the length (in words) */
+ if (((next_iwarp_state & NES_CQP_QP_IWARP_STATE_MASK) == NES_CQP_QP_IWARP_STATE_TERMINATE) &&
+ !(next_iwarp_state & NES_CQP_QP_TERM_DONT_SEND_TERM_MSG)) {
+ termlen = ((termlen + 3) >> 2) << NES_CQP_OP_TERMLEN_SHIFT;
+ set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_NEW_MSS_IDX, termlen);
+ }
+
atomic_set(&cqp_request->refcount, 2);
nes_post_cqp_request(nesdev, cqp_request);
@@ -3086,6 +3149,9 @@
}
nes_debug(NES_DBG_MOD_QP, "QP%u: new state = error\n",
nesqp->hwqp.qp_id);
+ if (nesqp->term_flags)
+ del_timer(&nesqp->terminate_timer);
+
next_iwarp_state = NES_CQP_QP_IWARP_STATE_ERROR;
/* next_iwarp_state = (NES_CQP_QP_IWARP_STATE_TERMINATE | 0x02000000); */
if (nesqp->hte_added) {
@@ -3163,7 +3229,7 @@
if (issue_modify_qp) {
nes_debug(NES_DBG_MOD_QP, "call nes_hw_modify_qp\n");
- ret = nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 1);
+ ret = nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 1);
if (ret)
nes_debug(NES_DBG_MOD_QP, "nes_hw_modify_qp (next_iwarp_state = 0x%08X)"
" failed for QP%u.\n",
@@ -3328,6 +3394,12 @@
head = nesqp->hwqp.sq_head;
while (ib_wr) {
+ /* Check for QP error */
+ if (nesqp->term_flags) {
+ err = -EINVAL;
+ break;
+ }
+
/* Check for SQ overflow */
if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) {
err = -EINVAL;
@@ -3484,6 +3556,12 @@
head = nesqp->hwqp.rq_head;
while (ib_wr) {
+ /* Check for QP error */
+ if (nesqp->term_flags) {
+ err = -EINVAL;
+ break;
+ }
+
if (ib_wr->num_sge > nesdev->nesadapter->max_sge) {
err = -EINVAL;
break;
@@ -3547,7 +3625,6 @@
{
u64 u64temp;
u64 wrid;
- /* u64 u64temp; */
unsigned long flags = 0;
struct nes_vnic *nesvnic = to_nesvnic(ibcq->device);
struct nes_device *nesdev = nesvnic->nesdev;
@@ -3555,12 +3632,13 @@
struct nes_qp *nesqp;
struct nes_hw_cqe cqe;
u32 head;
- u32 wq_tail;
+ u32 wq_tail = 0;
u32 cq_size;
u32 cqe_count = 0;
u32 wqe_index;
u32 u32temp;
- /* u32 counter; */
+ u32 move_cq_head = 1;
+ u32 err_code;
nes_debug(NES_DBG_CQ, "\n");
@@ -3570,29 +3648,40 @@
cq_size = nescq->hw_cq.cq_size;
while (cqe_count < num_entries) {
- if (le32_to_cpu(nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX]) &
- NES_CQE_VALID) {
- /*
- * Make sure we read CQ entry contents *after*
- * we've checked the valid bit.
- */
- rmb();
+ if ((le32_to_cpu(nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX]) &
+ NES_CQE_VALID) == 0)
+ break;
- cqe = nescq->hw_cq.cq_vbase[head];
- nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX] = 0;
- u32temp = le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
- wqe_index = u32temp &
- (nesdev->nesadapter->max_qp_wr - 1);
- u32temp &= ~(NES_SW_CONTEXT_ALIGN-1);
- /* parse CQE, get completion context from WQE (either rq or sq */
- u64temp = (((u64)(le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX])))<<32) |
- ((u64)u32temp);
- nesqp = *((struct nes_qp **)&u64temp);
+ /*
+ * Make sure we read CQ entry contents *after*
+ * we've checked the valid bit.
+ */
+ rmb();
+
+ cqe = nescq->hw_cq.cq_vbase[head];
+ u32temp = le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
+ wqe_index = u32temp & (nesdev->nesadapter->max_qp_wr - 1);
+ u32temp &= ~(NES_SW_CONTEXT_ALIGN-1);
+ /* parse CQE, get completion context from WQE (either rq or sq) */
+ u64temp = (((u64)(le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_HIGH_IDX])))<<32) |
+ ((u64)u32temp);
+
+ if (u64temp) {
+ nesqp = (struct nes_qp *)(unsigned long)u64temp;
memset(entry, 0, sizeof *entry);
if (cqe.cqe_words[NES_CQE_ERROR_CODE_IDX] == 0) {
entry->status = IB_WC_SUCCESS;
} else {
- entry->status = IB_WC_WR_FLUSH_ERR;
+ err_code = le32_to_cpu(cqe.cqe_words[NES_CQE_ERROR_CODE_IDX]);
+ if (NES_IWARP_CQE_MAJOR_DRV == (err_code >> 16)) {
+ entry->status = err_code & 0x0000ffff;
+
+ /* The rest of the cqe's will be marked as flushed */
+ nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_ERROR_CODE_IDX] =
+ cpu_to_le32((NES_IWARP_CQE_MAJOR_FLUSH << 16) |
+ NES_IWARP_CQE_MINOR_FLUSH);
+ } else
+ entry->status = IB_WC_WR_FLUSH_ERR;
}
entry->qp = &nesqp->ibqp;
@@ -3601,20 +3690,18 @@
if (le32_to_cpu(cqe.cqe_words[NES_CQE_OPCODE_IDX]) & NES_CQE_SQ) {
if (nesqp->skip_lsmm) {
nesqp->skip_lsmm = 0;
- wq_tail = nesqp->hwqp.sq_tail++;
+ nesqp->hwqp.sq_tail++;
}
/* Working on a SQ Completion*/
- wq_tail = wqe_index;
- nesqp->hwqp.sq_tail = (wqe_index+1)&(nesqp->hwqp.sq_size - 1);
- wrid = (((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wq_tail].
+ wrid = (((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_COMP_SCRATCH_HIGH_IDX]))) << 32) |
- ((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wq_tail].
+ ((u64)(cpu_to_le32((u32)nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_COMP_SCRATCH_LOW_IDX])));
- entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wq_tail].
+ entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX]);
- switch (le32_to_cpu(nesqp->hwqp.sq_vbase[wq_tail].
+ switch (le32_to_cpu(nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_MISC_IDX]) & 0x3f) {
case NES_IWARP_SQ_OP_RDMAW:
nes_debug(NES_DBG_CQ, "Operation = RDMA WRITE.\n");
@@ -3623,7 +3710,7 @@
case NES_IWARP_SQ_OP_RDMAR:
nes_debug(NES_DBG_CQ, "Operation = RDMA READ.\n");
entry->opcode = IB_WC_RDMA_READ;
- entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wq_tail].
+ entry->byte_len = le32_to_cpu(nesqp->hwqp.sq_vbase[wqe_index].
wqe_words[NES_IWARP_SQ_WQE_RDMA_LENGTH_IDX]);
break;
case NES_IWARP_SQ_OP_SENDINV:
@@ -3634,33 +3721,54 @@
entry->opcode = IB_WC_SEND;
break;
}
+
+ nesqp->hwqp.sq_tail = (wqe_index+1)&(nesqp->hwqp.sq_size - 1);
+ if ((entry->status != IB_WC_SUCCESS) && (nesqp->hwqp.sq_tail != nesqp->hwqp.sq_head)) {
+ move_cq_head = 0;
+ wq_tail = nesqp->hwqp.sq_tail;
+ }
} else {
/* Working on a RQ Completion*/
- wq_tail = wqe_index;
- nesqp->hwqp.rq_tail = (wqe_index+1)&(nesqp->hwqp.rq_size - 1);
entry->byte_len = le32_to_cpu(cqe.cqe_words[NES_CQE_PAYLOAD_LENGTH_IDX]);
- wrid = ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wq_tail].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_LOW_IDX]))) |
- ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wq_tail].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_HIGH_IDX]))<<32);
+ wrid = ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wqe_index].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_LOW_IDX]))) |
+ ((u64)(le32_to_cpu(nesqp->hwqp.rq_vbase[wqe_index].wqe_words[NES_IWARP_RQ_WQE_COMP_SCRATCH_HIGH_IDX]))<<32);
entry->opcode = IB_WC_RECV;
- }
- entry->wr_id = wrid;
+ nesqp->hwqp.rq_tail = (wqe_index+1)&(nesqp->hwqp.rq_size - 1);
+ if ((entry->status != IB_WC_SUCCESS) && (nesqp->hwqp.rq_tail != nesqp->hwqp.rq_head)) {
+ move_cq_head = 0;
+ wq_tail = nesqp->hwqp.rq_tail;
+ }
+ }
+
+ entry->wr_id = wrid;
+ entry++;
+ cqe_count++;
+ }
+
+ if (move_cq_head) {
+ nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_OPCODE_IDX] = 0;
if (++head >= cq_size)
head = 0;
- cqe_count++;
nescq->polled_completions++;
+
if ((nescq->polled_completions > (cq_size / 2)) ||
(nescq->polled_completions == 255)) {
nes_debug(NES_DBG_CQ, "CQ%u Issuing CQE Allocate since more than half of cqes"
- " are pending %u of %u.\n",
- nescq->hw_cq.cq_number, nescq->polled_completions, cq_size);
+ " are pending %u of %u.\n",
+ nescq->hw_cq.cq_number, nescq->polled_completions, cq_size);
nes_write32(nesdev->regs+NES_CQE_ALLOC,
- nescq->hw_cq.cq_number | (nescq->polled_completions << 16));
+ nescq->hw_cq.cq_number | (nescq->polled_completions << 16));
nescq->polled_completions = 0;
}
- entry++;
- } else
- break;
+ } else {
+ /* Update the wqe index and set status to flush */
+ wqe_index = le32_to_cpu(cqe.cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX]);
+ wqe_index = (wqe_index & (~(nesdev->nesadapter->max_qp_wr - 1))) | wq_tail;
+ nescq->hw_cq.cq_vbase[head].cqe_words[NES_CQE_COMP_COMP_CTX_LOW_IDX] =
+ cpu_to_le32(wqe_index);
+ move_cq_head = 1; /* ready for next pass */
+ }
}
if (nescq->polled_completions) {
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index 41c07f2..89822d7 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -40,6 +40,10 @@
#define NES_MAX_USER_DB_REGIONS 4096
#define NES_MAX_USER_WQ_REGIONS 4096
+#define NES_TERM_SENT 0x01
+#define NES_TERM_RCVD 0x02
+#define NES_TERM_DONE 0x04
+
struct nes_ucontext {
struct ib_ucontext ibucontext;
struct nes_device *nesdev;
@@ -119,6 +123,11 @@
spinlock_t lock;
};
+struct disconn_work {
+ struct work_struct work;
+ struct nes_qp *nesqp;
+};
+
struct iw_cm_id;
struct ietf_mpa_frame;
@@ -127,7 +136,6 @@
void *allocated_buffer;
struct iw_cm_id *cm_id;
struct workqueue_struct *wq;
- struct work_struct disconn_work;
struct nes_cq *nesscq;
struct nes_cq *nesrcq;
struct nes_pd *nespd;
@@ -155,9 +163,13 @@
void *pbl_vbase;
dma_addr_t pbl_pbase;
struct page *page;
+ struct timer_list terminate_timer;
+ enum ib_event_type terminate_eventtype;
wait_queue_head_t kick_waitq;
u16 in_disconnect;
u16 private_data_len;
+ u16 term_sq_flush_code;
+ u16 term_rq_flush_code;
u8 active_conn;
u8 skip_lsmm;
u8 user_mode;
@@ -165,7 +177,7 @@
u8 hw_iwarp_state;
u8 flush_issued;
u8 hw_tcp_state;
- u8 disconn_pending;
+ u8 term_flags;
u8 destroyed;
};
#endif /* NES_VERBS_H */
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 181b1f3..30bdf42 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -31,7 +31,6 @@
*/
#include <rdma/ib_cm.h>
-#include <rdma/ib_cache.h>
#include <net/dst.h>
#include <net/icmp.h>
#include <linux/icmpv6.h>
@@ -663,7 +662,6 @@
skb_reset_mac_header(skb);
skb_pull(skb, IPOIB_ENCAP_LEN);
- dev->last_rx = jiffies;
++dev->stats.rx_packets;
dev->stats.rx_bytes += skb->len;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index e7e5adf..8c91d9f 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -36,7 +36,6 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
-#include <rdma/ib_cache.h>
#include <linux/ip.h>
#include <linux/tcp.h>
@@ -277,7 +276,6 @@
skb_reset_mac_header(skb);
skb_pull(skb, IPOIB_ENCAP_LEN);
- dev->last_rx = jiffies;
++dev->stats.rx_packets;
dev->stats.rx_bytes += skb->len;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index e319d91..2bf5116 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -604,8 +604,11 @@
skb_queue_len(&neigh->queue));
goto err_drop;
}
- } else
+ } else {
+ spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb_dst(skb)->neighbour->ha));
+ return;
+ }
} else {
neigh->ah = NULL;
@@ -688,7 +691,9 @@
ipoib_dbg(priv, "Send unicast ARP to %04x\n",
be16_to_cpu(path->pathrec.dlid));
+ spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, path->ah, IPOIB_QPN(phdr->hwaddr));
+ return;
} else if ((path->query || !path_rec_start(dev, path)) &&
skb_queue_len(&path->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
/* put pseudoheader back on for next time */
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index a0e9753..25874fc 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -720,7 +720,9 @@
}
}
+ spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN);
+ return;
}
unlock:
@@ -758,6 +760,20 @@
}
}
+static int ipoib_mcast_addr_is_valid(const u8 *addr, unsigned int addrlen,
+ const u8 *broadcast)
+{
+ if (addrlen != INFINIBAND_ALEN)
+ return 0;
+ /* reserved QPN, prefix, scope */
+ if (memcmp(addr, broadcast, 6))
+ return 0;
+ /* signature lower, pkey */
+ if (memcmp(addr + 7, broadcast + 7, 3))
+ return 0;
+ return 1;
+}
+
void ipoib_mcast_restart_task(struct work_struct *work)
{
struct ipoib_dev_priv *priv =
@@ -791,6 +807,11 @@
for (mclist = dev->mc_list; mclist; mclist = mclist->next) {
union ib_gid mgid;
+ if (!ipoib_mcast_addr_is_valid(mclist->dmi_addr,
+ mclist->dmi_addrlen,
+ dev->broadcast))
+ continue;
+
memcpy(mgid.raw, mclist->dmi_addr + 4, sizeof mgid);
mcast = __ipoib_mcast_find(dev, &mgid);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 4cfd084f..9a1d55b 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -456,8 +456,11 @@
unsigned int cmd, void __user *argp)
{
struct input_dev *dev = joydev->handle.dev;
+ size_t len;
int i, j;
+ const char *name;
+ /* Process fixed-sized commands. */
switch (cmd) {
case JS_SET_CAL:
@@ -499,9 +502,22 @@
return copy_to_user(argp, joydev->corr,
sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0;
- case JSIOCSAXMAP:
- if (copy_from_user(joydev->abspam, argp,
- sizeof(__u8) * (ABS_MAX + 1)))
+ }
+
+ /*
+ * Process variable-sized commands (the axis and button map commands
+ * are considered variable-sized to decouple them from the values of
+ * ABS_MAX and KEY_MAX).
+ */
+ switch (cmd & ~IOCSIZE_MASK) {
+
+ case (JSIOCSAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ /*
+ * FIXME: we should not copy into our axis map before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->abspam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
@@ -511,13 +527,17 @@
}
return 0;
- case JSIOCGAXMAP:
- return copy_to_user(argp, joydev->abspam,
- sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0;
+ case (JSIOCGAXMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam));
+ return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0;
- case JSIOCSBTNMAP:
- if (copy_from_user(joydev->keypam, argp,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)))
+ case (JSIOCSBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ /*
+ * FIXME: we should not copy into our keymap before
+ * validating the data.
+ */
+ if (copy_from_user(joydev->keypam, argp, len))
return -EFAULT;
for (i = 0; i < joydev->nkey; i++) {
@@ -529,25 +549,19 @@
return 0;
- case JSIOCGBTNMAP:
- return copy_to_user(argp, joydev->keypam,
- sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0;
+ case (JSIOCGBTNMAP & ~IOCSIZE_MASK):
+ len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam));
+ return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0;
- default:
- if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
- int len;
- const char *name = dev->name;
+ case JSIOCGNAME(0):
+ name = dev->name;
+ if (!name)
+ return 0;
- if (!name)
- return 0;
- len = strlen(name) + 1;
- if (len > _IOC_SIZE(cmd))
- len = _IOC_SIZE(cmd);
- if (copy_to_user(argp, name, len))
- return -EFAULT;
- return len;
- }
+ len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1);
+ return copy_to_user(argp, name, len) ? -EFAULT : len;
}
+
return -EINVAL;
}
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index baabf83..f6c688c 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -74,6 +74,7 @@
{ 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce },
{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //?
{ 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //?
+ { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce },
{ 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //?
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index f83185a..9f289d8 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -223,6 +223,7 @@
{ USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */
{ USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */
{ USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */
+ { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */
{ USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */
{ USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */
{ USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 95fe045..6c6a09b 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -880,6 +880,14 @@
};
/*
+ * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate
+ * release for their volume buttons
+ */
+static unsigned int atkbd_hp_r4000_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
+
+/*
* Samsung NC10,NC20 with Fn+F? key release not working
*/
static unsigned int atkbd_samsung_forced_release_keys[] = {
@@ -1537,6 +1545,33 @@
.driver_data = atkbd_hp_zv6100_forced_release_keys,
},
{
+ .ident = "HP Presario R4000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
+ .ident = "HP Presario R4100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
+ .ident = "HP Presario R4200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
.ident = "Inventec Symphony",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index ae04d8a4..ccbf23e 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -382,6 +382,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
},
},
+ {
+ .ident = "Acer Aspire 5536",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+ },
+ },
{ }
};
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index a9d5031..ea30c98 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -388,6 +388,32 @@
return result;
}
+static int wacom_query_tablet_data(struct usb_interface *intf)
+{
+ unsigned char *rep_data;
+ int limit = 0;
+ int error;
+
+ rep_data = kmalloc(2, GFP_KERNEL);
+ if (!rep_data)
+ return -ENOMEM;
+
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+
+ kfree(rep_data);
+
+ return error < 0 ? error : 0;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
@@ -398,7 +424,6 @@
struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
- char rep_data[2], limit = 0;
struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
@@ -489,20 +514,10 @@
/*
* Ask the tablet to report tablet data if it is not a Tablet PC.
- * Repeat until it succeeds
+ * Note that if query fails it is not a hard failure.
*/
- if (wacom_wac->features->type != TABLETPC) {
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
- 2, rep_data, 2);
- if (error >= 0)
- error = usb_get_report(intf,
- WAC_HID_FEATURE_REPORT, 2,
- rep_data, 2);
- } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
- }
+ if (wacom_wac->features->type != TABLETPC)
+ wacom_query_tablet_data(intf);
usb_set_intfdata(intf, wacom);
return 0;
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 6954f55..3a7a582 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -170,11 +170,11 @@
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
- if (isr & UCB_IE_TSPX) {
+ if (isr & UCB_IE_TSPX)
ucb1400_ts_irq_disable(ucb->ac97);
- enable_irq(ucb->irq);
- } else
- printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ else
+ dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+ enable_irq(ucb->irq);
}
static int ucb1400_ts_thread(void *_ucb)
@@ -345,6 +345,7 @@
static int ucb1400_ts_probe(struct platform_device *dev)
{
int error, x_res, y_res;
+ u16 fcsr;
struct ucb1400_ts *ucb = dev->dev.platform_data;
ucb->ts_idev = input_allocate_device();
@@ -382,6 +383,14 @@
ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ /*
+ * Enable ADC filter to prevent horrible jitter on Colibri.
+ * This also further reduces jitter on boards where ADCSYNC
+ * pin is connected.
+ */
+ fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+ ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 6071f58..937dfe4 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -326,7 +326,7 @@
.probe = w90x900ts_probe,
.remove = __devexit_p(w90x900ts_remove),
.driver = {
- .name = "w90x900-ts",
+ .name = "nuc900-ts",
.owner = THIS_MODULE,
},
};
@@ -347,4 +347,4 @@
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 touch screen driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-ts");
+MODULE_ALIAS("platform:nuc900-ts");
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 02bdca6..022a194 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -21,8 +21,6 @@
if ISDN
-source "drivers/isdn/mISDN/Kconfig"
-
menuconfig ISDN_I4L
tristate "Old ISDN4Linux (deprecated)"
---help---
@@ -41,9 +39,9 @@
It is still available, though, for use with adapters that are not
supported by the new CAPI subsystem yet.
-if ISDN_I4L
+source "drivers/isdn/mISDN/Kconfig"
+
source "drivers/isdn/i4l/Kconfig"
-endif
menuconfig ISDN_CAPI
tristate "CAPI 2.0 subsystem"
diff --git a/drivers/isdn/act2000/capi.c b/drivers/isdn/act2000/capi.c
index 946c38c..1f0a949 100644
--- a/drivers/isdn/act2000/capi.c
+++ b/drivers/isdn/act2000/capi.c
@@ -78,7 +78,6 @@
#endif
{{ 0x00, 0x00}, NULL},
};
-#define num_valid_msg (sizeof(valid_msg)/sizeof(actcapi_msgdsc))
#define num_valid_imsg 27 /* MANUFACTURER_IND */
/*
@@ -1025,7 +1024,7 @@
#ifdef DEBUG_DUMP_SKB
dump_skb(skb);
#endif
- for (i = 0; i < num_valid_msg; i++)
+ for (i = 0; i < ARRAY_SIZE(valid_msg); i++)
if ((msg->hdr.cmd.cmd == valid_msg[i].cmd.cmd) &&
(msg->hdr.cmd.subcmd == valid_msg[i].cmd.subcmd)) {
descr = valid_msg[i].description;
diff --git a/drivers/isdn/act2000/module.c b/drivers/isdn/act2000/module.c
index 8325022..f774e12 100644
--- a/drivers/isdn/act2000/module.c
+++ b/drivers/isdn/act2000/module.c
@@ -23,7 +23,6 @@
0x0200, 0x0240, 0x0280, 0x02c0, 0x0300, 0x0340, 0x0380,
0xcfe0, 0xcfa0, 0xcf60, 0xcf20, 0xcee0, 0xcea0, 0xce60,
};
-#define ISA_NRPORTS (sizeof(act2000_isa_ports)/sizeof(unsigned short))
static act2000_card *cards = (act2000_card *) NULL;
@@ -686,21 +685,21 @@
* This may result in more than one card detected.
*/
switch (bus) {
- case ACT2000_BUS_ISA:
- for (i = 0; i < ISA_NRPORTS; i++)
- if (act2000_isa_detect(act2000_isa_ports[i])) {
- printk(KERN_INFO
- "act2000: Detected ISA card at port 0x%x\n",
- act2000_isa_ports[i]);
- act2000_alloccard(bus, act2000_isa_ports[i], irq, id);
- }
- break;
- case ACT2000_BUS_MCA:
- case ACT2000_BUS_PCMCIA:
- default:
- printk(KERN_WARNING
- "act2000: addcard: Invalid BUS type %d\n",
- bus);
+ case ACT2000_BUS_ISA:
+ for (i = 0; i < ARRAY_SIZE(act2000_isa_ports); i++)
+ if (act2000_isa_detect(act2000_isa_ports[i])) {
+ printk(KERN_INFO "act2000: Detected "
+ "ISA card at port 0x%x\n",
+ act2000_isa_ports[i]);
+ act2000_alloccard(bus,
+ act2000_isa_ports[i], irq, id);
+ }
+ break;
+ case ACT2000_BUS_MCA:
+ case ACT2000_BUS_PCMCIA:
+ default:
+ printk(KERN_WARNING
+ "act2000: addcard: Invalid BUS type %d\n", bus);
}
}
if (!cards)
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 31f91c1..27d5dd6 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -551,9 +551,7 @@
dbug(1,dprintf("com=%x",msg->header.command));
for(j=0;j<MAX_MSG_PARMS+1;j++) msg_parms[j].length = 0;
- for(i=0, ret = _BAD_MSG;
- i<(sizeof(ftable)/sizeof(struct _ftable));
- i++) {
+ for(i=0, ret = _BAD_MSG; i < ARRAY_SIZE(ftable); i++) {
if(ftable[i].command==msg->header.command) {
/* break loop if the message is correct, otherwise continue scan */
diff --git a/drivers/isdn/hardware/eicon/os_4bri.c b/drivers/isdn/hardware/eicon/os_4bri.c
index c964b8d..cb7616c 100644
--- a/drivers/isdn/hardware/eicon/os_4bri.c
+++ b/drivers/isdn/hardware/eicon/os_4bri.c
@@ -149,8 +149,7 @@
diva_os_xdi_adapter_t *diva_current;
diva_os_xdi_adapter_t *adapter_list[4];
PISDN_ADAPTER Slave;
- unsigned long bar_length[sizeof(_4bri_bar_length) /
- sizeof(_4bri_bar_length[0])];
+ unsigned long bar_length[ARRAY_SIZE(_4bri_bar_length)];
int v2 = _4bri_is_rev_2_card(a->CardOrdinal);
int tasks = _4bri_is_rev_2_bri_card(a->CardOrdinal) ? 1 : MQ_INSTANCE_COUNT;
int factor = (tasks == 1) ? 1 : 2;
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 3024566..bde55d7 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -39,3 +39,54 @@
Enable support for USB ISDN TAs with Cologne Chip AG's
HFC-S USB ISDN Controller
+config MISDN_AVMFRITZ
+ tristate "Support for AVM FRITZ!CARD PCI"
+ depends on MISDN
+ depends on PCI
+ select MISDN_IPAC
+ help
+ Enable support for AVMs FRITZ!CARD PCI cards
+
+config MISDN_SPEEDFAX
+ tristate "Support for Sedlbauer Speedfax+"
+ depends on MISDN
+ depends on PCI
+ select MISDN_IPAC
+ select MISDN_ISAR
+ help
+ Enable support for Sedlbauer Speedfax+.
+
+config MISDN_INFINEON
+ tristate "Support for cards with Infineon chipset"
+ depends on MISDN
+ depends on PCI
+ select MISDN_IPAC
+ help
+ Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
+ chip from Infineon (former manufacturer Siemens).
+
+config MISDN_W6692
+ tristate "Support for cards with Winbond 6692"
+ depends on MISDN
+ depends on PCI
+ help
+ Enable support for Winbond 6692 PCI chip based cards.
+
+config MISDN_NETJET
+ tristate "Support for NETJet cards"
+ depends on MISDN
+ depends on PCI
+ select MISDN_IPAC
+ select ISDN_HDLC
+ help
+ Enable support for Traverse Technologies NETJet PCI cards.
+
+
+config MISDN_IPAC
+ tristate
+ depends on MISDN
+
+config MISDN_ISAR
+ tristate
+ depends on MISDN
+
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
index b040352..2987d99 100644
--- a/drivers/isdn/hardware/mISDN/Makefile
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -6,3 +6,11 @@
obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
obj-$(CONFIG_MISDN_HFCUSB) += hfcsusb.o
+obj-$(CONFIG_MISDN_AVMFRITZ) += avmfritz.o
+obj-$(CONFIG_MISDN_SPEEDFAX) += speedfax.o
+obj-$(CONFIG_MISDN_INFINEON) += mISDNinfineon.o
+obj-$(CONFIG_MISDN_W6692) += w6692.o
+obj-$(CONFIG_MISDN_NETJET) += netjet.o
+# chip modules
+obj-$(CONFIG_MISDN_IPAC) += mISDNipac.o
+obj-$(CONFIG_MISDN_ISAR) += mISDNisar.o
diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c
new file mode 100644
index 0000000..81ac541
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/avmfritz.c
@@ -0,0 +1,1152 @@
+/*
+ * avm_fritz.c low level stuff for AVM FRITZ!CARD PCI ISDN cards
+ * Thanks to AVM, Berlin for informations
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include <asm/unaligned.h>
+#include "ipac.h"
+
+
+#define AVMFRITZ_REV "2.1"
+
+static int AVM_cnt;
+static int debug;
+
+enum {
+ AVM_FRITZ_PCI,
+ AVM_FRITZ_PCIV2,
+};
+
+#define HDLC_FIFO 0x0
+#define HDLC_STATUS 0x4
+#define CHIP_WINDOW 0x10
+
+#define CHIP_INDEX 0x4
+#define AVM_HDLC_1 0x00
+#define AVM_HDLC_2 0x01
+#define AVM_ISAC_FIFO 0x02
+#define AVM_ISAC_REG_LOW 0x04
+#define AVM_ISAC_REG_HIGH 0x06
+
+#define AVM_STATUS0_IRQ_ISAC 0x01
+#define AVM_STATUS0_IRQ_HDLC 0x02
+#define AVM_STATUS0_IRQ_TIMER 0x04
+#define AVM_STATUS0_IRQ_MASK 0x07
+
+#define AVM_STATUS0_RESET 0x01
+#define AVM_STATUS0_DIS_TIMER 0x02
+#define AVM_STATUS0_RES_TIMER 0x04
+#define AVM_STATUS0_ENA_IRQ 0x08
+#define AVM_STATUS0_TESTBIT 0x10
+
+#define AVM_STATUS1_INT_SEL 0x0f
+#define AVM_STATUS1_ENA_IOM 0x80
+
+#define HDLC_MODE_ITF_FLG 0x01
+#define HDLC_MODE_TRANS 0x02
+#define HDLC_MODE_CCR_7 0x04
+#define HDLC_MODE_CCR_16 0x08
+#define HDLC_MODE_TESTLOOP 0x80
+
+#define HDLC_INT_XPR 0x80
+#define HDLC_INT_XDU 0x40
+#define HDLC_INT_RPR 0x20
+#define HDLC_INT_MASK 0xE0
+
+#define HDLC_STAT_RME 0x01
+#define HDLC_STAT_RDO 0x10
+#define HDLC_STAT_CRCVFRRAB 0x0E
+#define HDLC_STAT_CRCVFR 0x06
+#define HDLC_STAT_RML_MASK 0x3f00
+
+#define HDLC_CMD_XRS 0x80
+#define HDLC_CMD_XME 0x01
+#define HDLC_CMD_RRS 0x20
+#define HDLC_CMD_XML_MASK 0x3f00
+#define HDLC_FIFO_SIZE 32
+
+/* Fritz PCI v2.0 */
+
+#define AVM_HDLC_FIFO_1 0x10
+#define AVM_HDLC_FIFO_2 0x18
+
+#define AVM_HDLC_STATUS_1 0x14
+#define AVM_HDLC_STATUS_2 0x1c
+
+#define AVM_ISACX_INDEX 0x04
+#define AVM_ISACX_DATA 0x08
+
+/* data struct */
+#define LOG_SIZE 63
+
+struct hdlc_stat_reg {
+#ifdef __BIG_ENDIAN
+ u8 fill;
+ u8 mode;
+ u8 xml;
+ u8 cmd;
+#else
+ u8 cmd;
+ u8 xml;
+ u8 mode;
+ u8 fill;
+#endif
+} __attribute__((packed));
+
+struct hdlc_hw {
+ union {
+ u32 ctrl;
+ struct hdlc_stat_reg sr;
+ } ctrl;
+ u32 stat;
+};
+
+struct fritzcard {
+ struct list_head list;
+ struct pci_dev *pdev;
+ char name[MISDN_MAX_IDLEN];
+ u8 type;
+ u8 ctrlreg;
+ u16 irq;
+ u32 irqcnt;
+ u32 addr;
+ spinlock_t lock; /* hw lock */
+ struct isac_hw isac;
+ struct hdlc_hw hdlc[2];
+ struct bchannel bch[2];
+ char log[LOG_SIZE + 1];
+};
+
+static LIST_HEAD(Cards);
+static DEFINE_RWLOCK(card_lock); /* protect Cards */
+
+static void
+_set_debug(struct fritzcard *card)
+{
+ card->isac.dch.debug = debug;
+ card->bch[0].debug = debug;
+ card->bch[1].debug = debug;
+}
+
+static int
+set_debug(const char *val, struct kernel_param *kp)
+{
+ int ret;
+ struct fritzcard *card;
+
+ ret = param_set_uint(val, kp);
+ if (!ret) {
+ read_lock(&card_lock);
+ list_for_each_entry(card, &Cards, list)
+ _set_debug(card);
+ read_unlock(&card_lock);
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(AVMFRITZ_REV);
+module_param_call(debug, set_debug, param_get_uint, &debug, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "avmfritz debug mask");
+
+/* Interface functions */
+
+static u8
+ReadISAC_V1(void *p, u8 offset)
+{
+ struct fritzcard *fc = p;
+ u8 idx = (offset > 0x2f) ? AVM_ISAC_REG_HIGH : AVM_ISAC_REG_LOW;
+
+ outb(idx, fc->addr + CHIP_INDEX);
+ return inb(fc->addr + CHIP_WINDOW + (offset & 0xf));
+}
+
+static void
+WriteISAC_V1(void *p, u8 offset, u8 value)
+{
+ struct fritzcard *fc = p;
+ u8 idx = (offset > 0x2f) ? AVM_ISAC_REG_HIGH : AVM_ISAC_REG_LOW;
+
+ outb(idx, fc->addr + CHIP_INDEX);
+ outb(value, fc->addr + CHIP_WINDOW + (offset & 0xf));
+}
+
+static void
+ReadFiFoISAC_V1(void *p, u8 off, u8 *data, int size)
+{
+ struct fritzcard *fc = p;
+
+ outb(AVM_ISAC_FIFO, fc->addr + CHIP_INDEX);
+ insb(fc->addr + CHIP_WINDOW, data, size);
+}
+
+static void
+WriteFiFoISAC_V1(void *p, u8 off, u8 *data, int size)
+{
+ struct fritzcard *fc = p;
+
+ outb(AVM_ISAC_FIFO, fc->addr + CHIP_INDEX);
+ outsb(fc->addr + CHIP_WINDOW, data, size);
+}
+
+static u8
+ReadISAC_V2(void *p, u8 offset)
+{
+ struct fritzcard *fc = p;
+
+ outl(offset, fc->addr + AVM_ISACX_INDEX);
+ return 0xff & inl(fc->addr + AVM_ISACX_DATA);
+}
+
+static void
+WriteISAC_V2(void *p, u8 offset, u8 value)
+{
+ struct fritzcard *fc = p;
+
+ outl(offset, fc->addr + AVM_ISACX_INDEX);
+ outl(value, fc->addr + AVM_ISACX_DATA);
+}
+
+static void
+ReadFiFoISAC_V2(void *p, u8 off, u8 *data, int size)
+{
+ struct fritzcard *fc = p;
+ int i;
+
+ outl(off, fc->addr + AVM_ISACX_INDEX);
+ for (i = 0; i < size; i++)
+ data[i] = 0xff & inl(fc->addr + AVM_ISACX_DATA);
+}
+
+static void
+WriteFiFoISAC_V2(void *p, u8 off, u8 *data, int size)
+{
+ struct fritzcard *fc = p;
+ int i;
+
+ outl(off, fc->addr + AVM_ISACX_INDEX);
+ for (i = 0; i < size; i++)
+ outl(data[i], fc->addr + AVM_ISACX_DATA);
+}
+
+static struct bchannel *
+Sel_BCS(struct fritzcard *fc, u32 channel)
+{
+ if (test_bit(FLG_ACTIVE, &fc->bch[0].Flags) &&
+ (fc->bch[0].nr & channel))
+ return &fc->bch[0];
+ else if (test_bit(FLG_ACTIVE, &fc->bch[1].Flags) &&
+ (fc->bch[1].nr & channel))
+ return &fc->bch[1];
+ else
+ return NULL;
+}
+
+static inline void
+__write_ctrl_pci(struct fritzcard *fc, struct hdlc_hw *hdlc, u32 channel) {
+ u32 idx = channel == 2 ? AVM_HDLC_2 : AVM_HDLC_1;
+
+ outl(idx, fc->addr + CHIP_INDEX);
+ outl(hdlc->ctrl.ctrl, fc->addr + CHIP_WINDOW + HDLC_STATUS);
+}
+
+static inline void
+__write_ctrl_pciv2(struct fritzcard *fc, struct hdlc_hw *hdlc, u32 channel) {
+ outl(hdlc->ctrl.ctrl, fc->addr + (channel == 2 ? AVM_HDLC_STATUS_2 :
+ AVM_HDLC_STATUS_1));
+}
+
+void
+write_ctrl(struct bchannel *bch, int which) {
+ struct fritzcard *fc = bch->hw;
+ struct hdlc_hw *hdlc;
+
+ hdlc = &fc->hdlc[(bch->nr - 1) & 1];
+ pr_debug("%s: hdlc %c wr%x ctrl %x\n", fc->name, '@' + bch->nr,
+ which, hdlc->ctrl.ctrl);
+ switch (fc->type) {
+ case AVM_FRITZ_PCIV2:
+ __write_ctrl_pciv2(fc, hdlc, bch->nr);
+ break;
+ case AVM_FRITZ_PCI:
+ __write_ctrl_pci(fc, hdlc, bch->nr);
+ break;
+ }
+}
+
+
+static inline u32
+__read_status_pci(u_long addr, u32 channel)
+{
+ outl(channel == 2 ? AVM_HDLC_2 : AVM_HDLC_1, addr + CHIP_INDEX);
+ return inl(addr + CHIP_WINDOW + HDLC_STATUS);
+}
+
+static inline u32
+__read_status_pciv2(u_long addr, u32 channel)
+{
+ return inl(addr + (channel == 2 ? AVM_HDLC_STATUS_2 :
+ AVM_HDLC_STATUS_1));
+}
+
+
+static u32
+read_status(struct fritzcard *fc, u32 channel)
+{
+ switch (fc->type) {
+ case AVM_FRITZ_PCIV2:
+ return __read_status_pciv2(fc->addr, channel);
+ case AVM_FRITZ_PCI:
+ return __read_status_pci(fc->addr, channel);
+ }
+ /* dummy */
+ return 0;
+}
+
+static void
+enable_hwirq(struct fritzcard *fc)
+{
+ fc->ctrlreg |= AVM_STATUS0_ENA_IRQ;
+ outb(fc->ctrlreg, fc->addr + 2);
+}
+
+static void
+disable_hwirq(struct fritzcard *fc)
+{
+ fc->ctrlreg &= ~AVM_STATUS0_ENA_IRQ;
+ outb(fc->ctrlreg, fc->addr + 2);
+}
+
+static int
+modehdlc(struct bchannel *bch, int protocol)
+{
+ struct fritzcard *fc = bch->hw;
+ struct hdlc_hw *hdlc;
+
+ hdlc = &fc->hdlc[(bch->nr - 1) & 1];
+ pr_debug("%s: hdlc %c protocol %x-->%x ch %d\n", fc->name,
+ '@' + bch->nr, bch->state, protocol, bch->nr);
+ hdlc->ctrl.ctrl = 0;
+ switch (protocol) {
+ case -1: /* used for init */
+ bch->state = -1;
+ case ISDN_P_NONE:
+ if (bch->state == ISDN_P_NONE)
+ break;
+ hdlc->ctrl.sr.cmd = HDLC_CMD_XRS | HDLC_CMD_RRS;
+ hdlc->ctrl.sr.mode = HDLC_MODE_TRANS;
+ write_ctrl(bch, 5);
+ bch->state = ISDN_P_NONE;
+ test_and_clear_bit(FLG_HDLC, &bch->Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &bch->Flags);
+ break;
+ case ISDN_P_B_RAW:
+ bch->state = protocol;
+ hdlc->ctrl.sr.cmd = HDLC_CMD_XRS | HDLC_CMD_RRS;
+ hdlc->ctrl.sr.mode = HDLC_MODE_TRANS;
+ write_ctrl(bch, 5);
+ hdlc->ctrl.sr.cmd = HDLC_CMD_XRS;
+ write_ctrl(bch, 1);
+ hdlc->ctrl.sr.cmd = 0;
+ test_and_set_bit(FLG_TRANSPARENT, &bch->Flags);
+ break;
+ case ISDN_P_B_HDLC:
+ bch->state = protocol;
+ hdlc->ctrl.sr.cmd = HDLC_CMD_XRS | HDLC_CMD_RRS;
+ hdlc->ctrl.sr.mode = HDLC_MODE_ITF_FLG;
+ write_ctrl(bch, 5);
+ hdlc->ctrl.sr.cmd = HDLC_CMD_XRS;
+ write_ctrl(bch, 1);
+ hdlc->ctrl.sr.cmd = 0;
+ test_and_set_bit(FLG_HDLC, &bch->Flags);
+ break;
+ default:
+ pr_info("%s: protocol not known %x\n", fc->name, protocol);
+ return -ENOPROTOOPT;
+ }
+ return 0;
+}
+
+static void
+hdlc_empty_fifo(struct bchannel *bch, int count)
+{
+ u32 *ptr;
+ u8 *p;
+ u32 val, addr;
+ int cnt = 0;
+ struct fritzcard *fc = bch->hw;
+
+ pr_debug("%s: %s %d\n", fc->name, __func__, count);
+ if (!bch->rx_skb) {
+ bch->rx_skb = mI_alloc_skb(bch->maxlen, GFP_ATOMIC);
+ if (!bch->rx_skb) {
+ pr_info("%s: B receive out of memory\n",
+ fc->name);
+ return;
+ }
+ }
+ if ((bch->rx_skb->len + count) > bch->maxlen) {
+ pr_debug("%s: overrun %d\n", fc->name,
+ bch->rx_skb->len + count);
+ return;
+ }
+ p = skb_put(bch->rx_skb, count);
+ ptr = (u32 *)p;
+ if (AVM_FRITZ_PCIV2 == fc->type)
+ addr = fc->addr + (bch->nr == 2 ?
+ AVM_HDLC_FIFO_2 : AVM_HDLC_FIFO_1);
+ else {
+ addr = fc->addr + CHIP_WINDOW;
+ outl(bch->nr == 2 ? AVM_HDLC_2 : AVM_HDLC_1, fc->addr);
+ }
+ while (cnt < count) {
+ val = le32_to_cpu(inl(addr));
+ put_unaligned(val, ptr);
+ ptr++;
+ cnt += 4;
+ }
+ if (debug & DEBUG_HW_BFIFO) {
+ snprintf(fc->log, LOG_SIZE, "B%1d-recv %s %d ",
+ bch->nr, fc->name, count);
+ print_hex_dump_bytes(fc->log, DUMP_PREFIX_OFFSET, p, count);
+ }
+}
+
+static void
+hdlc_fill_fifo(struct bchannel *bch)
+{
+ struct fritzcard *fc = bch->hw;
+ struct hdlc_hw *hdlc;
+ int count, cnt = 0;
+ u8 *p;
+ u32 *ptr, val, addr;
+
+ hdlc = &fc->hdlc[(bch->nr - 1) & 1];
+ if (!bch->tx_skb)
+ return;
+ count = bch->tx_skb->len - bch->tx_idx;
+ if (count <= 0)
+ return;
+ p = bch->tx_skb->data + bch->tx_idx;
+ hdlc->ctrl.sr.cmd &= ~HDLC_CMD_XME;
+ if (count > HDLC_FIFO_SIZE) {
+ count = HDLC_FIFO_SIZE;
+ } else {
+ if (test_bit(FLG_HDLC, &bch->Flags))
+ hdlc->ctrl.sr.cmd |= HDLC_CMD_XME;
+ }
+ pr_debug("%s: %s %d/%d/%d", fc->name, __func__, count,
+ bch->tx_idx, bch->tx_skb->len);
+ ptr = (u32 *)p;
+ bch->tx_idx += count;
+ hdlc->ctrl.sr.xml = ((count == HDLC_FIFO_SIZE) ? 0 : count);
+ if (AVM_FRITZ_PCIV2 == fc->type) {
+ __write_ctrl_pciv2(fc, hdlc, bch->nr);
+ addr = fc->addr + (bch->nr == 2 ?
+ AVM_HDLC_FIFO_2 : AVM_HDLC_FIFO_1);
+ } else {
+ __write_ctrl_pci(fc, hdlc, bch->nr);
+ addr = fc->addr + CHIP_WINDOW;
+ }
+ while (cnt < count) {
+ val = get_unaligned(ptr);
+ outl(cpu_to_le32(val), addr);
+ ptr++;
+ cnt += 4;
+ }
+ if (debug & DEBUG_HW_BFIFO) {
+ snprintf(fc->log, LOG_SIZE, "B%1d-send %s %d ",
+ bch->nr, fc->name, count);
+ print_hex_dump_bytes(fc->log, DUMP_PREFIX_OFFSET, p, count);
+ }
+}
+
+static void
+HDLC_irq_xpr(struct bchannel *bch)
+{
+ if (bch->tx_skb && bch->tx_idx < bch->tx_skb->len)
+ hdlc_fill_fifo(bch);
+ else {
+ if (bch->tx_skb) {
+ /* send confirm, on trans, free on hdlc. */
+ if (test_bit(FLG_TRANSPARENT, &bch->Flags))
+ confirm_Bsend(bch);
+ dev_kfree_skb(bch->tx_skb);
+ }
+ if (get_next_bframe(bch))
+ hdlc_fill_fifo(bch);
+ }
+}
+
+static void
+HDLC_irq(struct bchannel *bch, u32 stat)
+{
+ struct fritzcard *fc = bch->hw;
+ int len;
+ struct hdlc_hw *hdlc;
+
+ hdlc = &fc->hdlc[(bch->nr - 1) & 1];
+ pr_debug("%s: ch%d stat %#x\n", fc->name, bch->nr, stat);
+ if (stat & HDLC_INT_RPR) {
+ if (stat & HDLC_STAT_RDO) {
+ hdlc->ctrl.sr.xml = 0;
+ hdlc->ctrl.sr.cmd |= HDLC_CMD_RRS;
+ write_ctrl(bch, 1);
+ hdlc->ctrl.sr.cmd &= ~HDLC_CMD_RRS;
+ write_ctrl(bch, 1);
+ if (bch->rx_skb)
+ skb_trim(bch->rx_skb, 0);
+ } else {
+ len = (stat & HDLC_STAT_RML_MASK) >> 8;
+ if (!len)
+ len = 32;
+ hdlc_empty_fifo(bch, len);
+ if (!bch->rx_skb)
+ goto handle_tx;
+ if ((stat & HDLC_STAT_RME) || test_bit(FLG_TRANSPARENT,
+ &bch->Flags)) {
+ if (((stat & HDLC_STAT_CRCVFRRAB) ==
+ HDLC_STAT_CRCVFR) ||
+ test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+ recv_Bchannel(bch, 0);
+ } else {
+ pr_debug("%s: got invalid frame\n",
+ fc->name);
+ skb_trim(bch->rx_skb, 0);
+ }
+ }
+ }
+ }
+handle_tx:
+ if (stat & HDLC_INT_XDU) {
+ /* Here we lost an TX interrupt, so
+ * restart transmitting the whole frame on HDLC
+ * in transparent mode we send the next data
+ */
+ if (bch->tx_skb)
+ pr_debug("%s: ch%d XDU len(%d) idx(%d) Flags(%lx)\n",
+ fc->name, bch->nr, bch->tx_skb->len,
+ bch->tx_idx, bch->Flags);
+ else
+ pr_debug("%s: ch%d XDU no tx_skb Flags(%lx)\n",
+ fc->name, bch->nr, bch->Flags);
+ if (bch->tx_skb && bch->tx_skb->len) {
+ if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+ bch->tx_idx = 0;
+ }
+ hdlc->ctrl.sr.xml = 0;
+ hdlc->ctrl.sr.cmd |= HDLC_CMD_XRS;
+ write_ctrl(bch, 1);
+ hdlc->ctrl.sr.cmd &= ~HDLC_CMD_XRS;
+ HDLC_irq_xpr(bch);
+ return;
+ } else if (stat & HDLC_INT_XPR)
+ HDLC_irq_xpr(bch);
+}
+
+static inline void
+HDLC_irq_main(struct fritzcard *fc)
+{
+ u32 stat;
+ struct bchannel *bch;
+
+ stat = read_status(fc, 1);
+ if (stat & HDLC_INT_MASK) {
+ bch = Sel_BCS(fc, 1);
+ if (bch)
+ HDLC_irq(bch, stat);
+ else
+ pr_debug("%s: spurious ch1 IRQ\n", fc->name);
+ }
+ stat = read_status(fc, 2);
+ if (stat & HDLC_INT_MASK) {
+ bch = Sel_BCS(fc, 2);
+ if (bch)
+ HDLC_irq(bch, stat);
+ else
+ pr_debug("%s: spurious ch2 IRQ\n", fc->name);
+ }
+}
+
+static irqreturn_t
+avm_fritz_interrupt(int intno, void *dev_id)
+{
+ struct fritzcard *fc = dev_id;
+ u8 val;
+ u8 sval;
+
+ spin_lock(&fc->lock);
+ sval = inb(fc->addr + 2);
+ pr_debug("%s: irq stat0 %x\n", fc->name, sval);
+ if ((sval & AVM_STATUS0_IRQ_MASK) == AVM_STATUS0_IRQ_MASK) {
+ /* shared IRQ from other HW */
+ spin_unlock(&fc->lock);
+ return IRQ_NONE;
+ }
+ fc->irqcnt++;
+
+ if (!(sval & AVM_STATUS0_IRQ_ISAC)) {
+ val = ReadISAC_V1(fc, ISAC_ISTA);
+ mISDNisac_irq(&fc->isac, val);
+ }
+ if (!(sval & AVM_STATUS0_IRQ_HDLC))
+ HDLC_irq_main(fc);
+ spin_unlock(&fc->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+avm_fritzv2_interrupt(int intno, void *dev_id)
+{
+ struct fritzcard *fc = dev_id;
+ u8 val;
+ u8 sval;
+
+ spin_lock(&fc->lock);
+ sval = inb(fc->addr + 2);
+ pr_debug("%s: irq stat0 %x\n", fc->name, sval);
+ if (!(sval & AVM_STATUS0_IRQ_MASK)) {
+ /* shared IRQ from other HW */
+ spin_unlock(&fc->lock);
+ return IRQ_NONE;
+ }
+ fc->irqcnt++;
+
+ if (sval & AVM_STATUS0_IRQ_HDLC)
+ HDLC_irq_main(fc);
+ if (sval & AVM_STATUS0_IRQ_ISAC) {
+ val = ReadISAC_V2(fc, ISACX_ISTA);
+ mISDNisac_irq(&fc->isac, val);
+ }
+ if (sval & AVM_STATUS0_IRQ_TIMER) {
+ pr_debug("%s: timer irq\n", fc->name);
+ outb(fc->ctrlreg | AVM_STATUS0_RES_TIMER, fc->addr + 2);
+ udelay(1);
+ outb(fc->ctrlreg, fc->addr + 2);
+ }
+ spin_unlock(&fc->lock);
+ return IRQ_HANDLED;
+}
+
+static int
+avm_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct fritzcard *fc = bch->hw;
+ int ret = -EINVAL;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(&fc->lock, flags);
+ ret = bchannel_senddata(bch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ hdlc_fill_fifo(bch);
+ ret = 0;
+ spin_unlock_irqrestore(&fc->lock, flags);
+ if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(&fc->lock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ spin_lock_irqsave(&fc->lock, flags);
+ if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+ ret = modehdlc(bch, ch->protocol);
+ else
+ ret = 0;
+ spin_unlock_irqrestore(&fc->lock, flags);
+ if (!ret)
+ _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ break;
+ case PH_DEACTIVATE_REQ:
+ spin_lock_irqsave(&fc->lock, flags);
+ mISDN_clear_bchannel(bch);
+ modehdlc(bch, ISDN_P_NONE);
+ spin_unlock_irqrestore(&fc->lock, flags);
+ _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ ret = 0;
+ break;
+ }
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static void
+inithdlc(struct fritzcard *fc)
+{
+ modehdlc(&fc->bch[0], -1);
+ modehdlc(&fc->bch[1], -1);
+}
+
+void
+clear_pending_hdlc_ints(struct fritzcard *fc)
+{
+ u32 val;
+
+ val = read_status(fc, 1);
+ pr_debug("%s: HDLC 1 STA %x\n", fc->name, val);
+ val = read_status(fc, 2);
+ pr_debug("%s: HDLC 2 STA %x\n", fc->name, val);
+}
+
+static void
+reset_avm(struct fritzcard *fc)
+{
+ switch (fc->type) {
+ case AVM_FRITZ_PCI:
+ fc->ctrlreg = AVM_STATUS0_RESET | AVM_STATUS0_DIS_TIMER;
+ break;
+ case AVM_FRITZ_PCIV2:
+ fc->ctrlreg = AVM_STATUS0_RESET;
+ break;
+ }
+ if (debug & DEBUG_HW)
+ pr_notice("%s: reset\n", fc->name);
+ disable_hwirq(fc);
+ mdelay(5);
+ switch (fc->type) {
+ case AVM_FRITZ_PCI:
+ fc->ctrlreg = AVM_STATUS0_DIS_TIMER | AVM_STATUS0_RES_TIMER;
+ disable_hwirq(fc);
+ outb(AVM_STATUS1_ENA_IOM, fc->addr + 3);
+ break;
+ case AVM_FRITZ_PCIV2:
+ fc->ctrlreg = 0;
+ disable_hwirq(fc);
+ break;
+ }
+ mdelay(1);
+ if (debug & DEBUG_HW)
+ pr_notice("%s: S0/S1 %x/%x\n", fc->name,
+ inb(fc->addr + 2), inb(fc->addr + 3));
+}
+
+static int
+init_card(struct fritzcard *fc)
+{
+ int ret, cnt = 3;
+ u_long flags;
+
+ reset_avm(fc); /* disable IRQ */
+ if (fc->type == AVM_FRITZ_PCIV2)
+ ret = request_irq(fc->irq, avm_fritzv2_interrupt,
+ IRQF_SHARED, fc->name, fc);
+ else
+ ret = request_irq(fc->irq, avm_fritz_interrupt,
+ IRQF_SHARED, fc->name, fc);
+ if (ret) {
+ pr_info("%s: couldn't get interrupt %d\n",
+ fc->name, fc->irq);
+ return ret;
+ }
+ while (cnt--) {
+ spin_lock_irqsave(&fc->lock, flags);
+ ret = fc->isac.init(&fc->isac);
+ if (ret) {
+ spin_unlock_irqrestore(&fc->lock, flags);
+ pr_info("%s: ISAC init failed with %d\n",
+ fc->name, ret);
+ break;
+ }
+ clear_pending_hdlc_ints(fc);
+ inithdlc(fc);
+ enable_hwirq(fc);
+ /* RESET Receiver and Transmitter */
+ if (AVM_FRITZ_PCIV2 == fc->type) {
+ WriteISAC_V2(fc, ISACX_MASK, 0);
+ WriteISAC_V2(fc, ISACX_CMDRD, 0x41);
+ } else {
+ WriteISAC_V1(fc, ISAC_MASK, 0);
+ WriteISAC_V1(fc, ISAC_CMDR, 0x41);
+ }
+ spin_unlock_irqrestore(&fc->lock, flags);
+ /* Timeout 10ms */
+ msleep_interruptible(10);
+ if (debug & DEBUG_HW)
+ pr_notice("%s: IRQ %d count %d\n", fc->name,
+ fc->irq, fc->irqcnt);
+ if (!fc->irqcnt) {
+ pr_info("%s: IRQ(%d) getting no IRQs during init %d\n",
+ fc->name, fc->irq, 3 - cnt);
+ reset_avm(fc);
+ } else
+ return 0;
+ }
+ free_irq(fc->irq, fc);
+ return -EIO;
+}
+
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+ struct fritzcard *fc = bch->hw;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = 0;
+ break;
+ /* Nothing implemented yet */
+ case MISDN_CTRL_FILL_EMPTY:
+ default:
+ pr_info("%s: %s unknown Op %x\n", fc->name, __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+avm_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct fritzcard *fc = bch->hw;
+ int ret = -EINVAL;
+ u_long flags;
+
+ pr_debug("%s: %s cmd:%x %p\n", fc->name, __func__, cmd, arg);
+ switch (cmd) {
+ case CLOSE_CHANNEL:
+ test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ if (test_bit(FLG_ACTIVE, &bch->Flags)) {
+ spin_lock_irqsave(&fc->lock, flags);
+ mISDN_freebchannel(bch);
+ test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+ test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+ modehdlc(bch, ISDN_P_NONE);
+ spin_unlock_irqrestore(&fc->lock, flags);
+ }
+ ch->protocol = ISDN_P_NONE;
+ ch->peer = NULL;
+ module_put(THIS_MODULE);
+ ret = 0;
+ break;
+ case CONTROL_CHANNEL:
+ ret = channel_bctrl(bch, arg);
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x)\n", fc->name, __func__, cmd);
+ }
+ return ret;
+}
+
+static int
+channel_ctrl(struct fritzcard *fc, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = MISDN_CTRL_LOOP;
+ break;
+ case MISDN_CTRL_LOOP:
+ /* cq->channel: 0 disable, 1 B1 loop 2 B2 loop, 3 both */
+ if (cq->channel < 0 || cq->channel > 3) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = fc->isac.ctrl(&fc->isac, HW_TESTLOOP, cq->channel);
+ break;
+ default:
+ pr_info("%s: %s unknown Op %x\n", fc->name, __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+open_bchannel(struct fritzcard *fc, struct channel_req *rq)
+{
+ struct bchannel *bch;
+
+ if (rq->adr.channel > 2)
+ return -EINVAL;
+ if (rq->protocol == ISDN_P_NONE)
+ return -EINVAL;
+ bch = &fc->bch[rq->adr.channel - 1];
+ if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+ return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
+ bch->ch.protocol = rq->protocol;
+ rq->ch = &bch->ch;
+ return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+avm_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct fritzcard *fc = dch->hw;
+ struct channel_req *rq;
+ int err = 0;
+
+ pr_debug("%s: %s cmd:%x %p\n", fc->name, __func__, cmd, arg);
+ switch (cmd) {
+ case OPEN_CHANNEL:
+ rq = arg;
+ if (rq->protocol == ISDN_P_TE_S0)
+ err = fc->isac.open(&fc->isac, rq);
+ else
+ err = open_bchannel(fc, rq);
+ if (err)
+ break;
+ if (!try_module_get(THIS_MODULE))
+ pr_info("%s: cannot get module\n", fc->name);
+ break;
+ case CLOSE_CHANNEL:
+ pr_debug("%s: dev(%d) close from %p\n", fc->name, dch->dev.id,
+ __builtin_return_address(0));
+ module_put(THIS_MODULE);
+ break;
+ case CONTROL_CHANNEL:
+ err = channel_ctrl(fc, arg);
+ break;
+ default:
+ pr_debug("%s: %s unknown command %x\n",
+ fc->name, __func__, cmd);
+ return -EINVAL;
+ }
+ return err;
+}
+
+int
+setup_fritz(struct fritzcard *fc)
+{
+ u32 val, ver;
+
+ if (!request_region(fc->addr, 32, fc->name)) {
+ pr_info("%s: AVM config port %x-%x already in use\n",
+ fc->name, fc->addr, fc->addr + 31);
+ return -EIO;
+ }
+ switch (fc->type) {
+ case AVM_FRITZ_PCI:
+ val = inl(fc->addr);
+ outl(AVM_HDLC_1, fc->addr + CHIP_INDEX);
+ ver = inl(fc->addr + CHIP_WINDOW + HDLC_STATUS) >> 24;
+ if (debug & DEBUG_HW) {
+ pr_notice("%s: PCI stat %#x\n", fc->name, val);
+ pr_notice("%s: PCI Class %X Rev %d\n", fc->name,
+ val & 0xff, (val >> 8) & 0xff);
+ pr_notice("%s: HDLC version %x\n", fc->name, ver & 0xf);
+ }
+ ASSIGN_FUNC(V1, ISAC, fc->isac);
+ fc->isac.type = IPAC_TYPE_ISAC;
+ break;
+ case AVM_FRITZ_PCIV2:
+ val = inl(fc->addr);
+ ver = inl(fc->addr + AVM_HDLC_STATUS_1) >> 24;
+ if (debug & DEBUG_HW) {
+ pr_notice("%s: PCI V2 stat %#x\n", fc->name, val);
+ pr_notice("%s: PCI V2 Class %X Rev %d\n", fc->name,
+ val & 0xff, (val>>8) & 0xff);
+ pr_notice("%s: HDLC version %x\n", fc->name, ver & 0xf);
+ }
+ ASSIGN_FUNC(V2, ISAC, fc->isac);
+ fc->isac.type = IPAC_TYPE_ISACX;
+ break;
+ default:
+ release_region(fc->addr, 32);
+ pr_info("%s: AVM unknown type %d\n", fc->name, fc->type);
+ return -ENODEV;
+ }
+ pr_notice("%s: %s config irq:%d base:0x%X\n", fc->name,
+ (fc->type == AVM_FRITZ_PCI) ? "AVM Fritz!CARD PCI" :
+ "AVM Fritz!CARD PCIv2", fc->irq, fc->addr);
+ return 0;
+}
+
+static void
+release_card(struct fritzcard *card)
+{
+ u_long flags;
+
+ disable_hwirq(card);
+ spin_lock_irqsave(&card->lock, flags);
+ modehdlc(&card->bch[0], ISDN_P_NONE);
+ modehdlc(&card->bch[1], ISDN_P_NONE);
+ spin_unlock_irqrestore(&card->lock, flags);
+ card->isac.release(&card->isac);
+ free_irq(card->irq, card);
+ mISDN_freebchannel(&card->bch[1]);
+ mISDN_freebchannel(&card->bch[0]);
+ mISDN_unregister_device(&card->isac.dch.dev);
+ release_region(card->addr, 32);
+ pci_disable_device(card->pdev);
+ pci_set_drvdata(card->pdev, NULL);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ kfree(card);
+ AVM_cnt--;
+}
+
+static int __devinit
+setup_instance(struct fritzcard *card)
+{
+ int i, err;
+ u_long flags;
+
+ snprintf(card->name, MISDN_MAX_IDLEN - 1, "AVM.%d", AVM_cnt + 1);
+ write_lock_irqsave(&card_lock, flags);
+ list_add_tail(&card->list, &Cards);
+ write_unlock_irqrestore(&card_lock, flags);
+
+ _set_debug(card);
+ card->isac.name = card->name;
+ spin_lock_init(&card->lock);
+ card->isac.hwlock = &card->lock;
+ mISDNisac_init(&card->isac, card);
+
+ card->isac.dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+ card->isac.dch.dev.D.ctrl = avm_dctrl;
+ for (i = 0; i < 2; i++) {
+ card->bch[i].nr = i + 1;
+ set_channelmap(i + 1, card->isac.dch.dev.channelmap);
+ mISDN_initbchannel(&card->bch[i], MAX_DATA_MEM);
+ card->bch[i].hw = card;
+ card->bch[i].ch.send = avm_l2l1B;
+ card->bch[i].ch.ctrl = avm_bctrl;
+ card->bch[i].ch.nr = i + 1;
+ list_add(&card->bch[i].ch.list, &card->isac.dch.dev.bchannels);
+ }
+ err = setup_fritz(card);
+ if (err)
+ goto error;
+ err = mISDN_register_device(&card->isac.dch.dev, &card->pdev->dev,
+ card->name);
+ if (err)
+ goto error_reg;
+ err = init_card(card);
+ if (!err) {
+ AVM_cnt++;
+ pr_notice("AVM %d cards installed DEBUG\n", AVM_cnt);
+ return 0;
+ }
+ mISDN_unregister_device(&card->isac.dch.dev);
+error_reg:
+ release_region(card->addr, 32);
+error:
+ card->isac.release(&card->isac);
+ mISDN_freebchannel(&card->bch[1]);
+ mISDN_freebchannel(&card->bch[0]);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ kfree(card);
+ return err;
+}
+
+static int __devinit
+fritzpci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = -ENOMEM;
+ struct fritzcard *card;
+
+ card = kzalloc(sizeof(struct fritzcard), GFP_KERNEL);
+ if (!card) {
+ pr_info("No kmem for fritzcard\n");
+ return err;
+ }
+ if (pdev->device == PCI_DEVICE_ID_AVM_A1_V2)
+ card->type = AVM_FRITZ_PCIV2;
+ else
+ card->type = AVM_FRITZ_PCI;
+ card->pdev = pdev;
+ err = pci_enable_device(pdev);
+ if (err) {
+ kfree(card);
+ return err;
+ }
+
+ pr_notice("mISDN: found adapter %s at %s\n",
+ (char *) ent->driver_data, pci_name(pdev));
+
+ card->addr = pci_resource_start(pdev, 1);
+ card->irq = pdev->irq;
+ pci_set_drvdata(pdev, card);
+ err = setup_instance(card);
+ if (err)
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void __devexit
+fritz_remove_pci(struct pci_dev *pdev)
+{
+ struct fritzcard *card = pci_get_drvdata(pdev);
+
+ if (card)
+ release_card(card);
+ else
+ if (debug)
+ pr_info("%s: drvdata allready removed\n", __func__);
+}
+
+static struct pci_device_id fcpci_ids[] __devinitdata = {
+ { PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1, PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, (unsigned long) "Fritz!Card PCI"},
+ { PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1_V2, PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, (unsigned long) "Fritz!Card PCI v2" },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, fcpci_ids);
+
+static struct pci_driver fcpci_driver = {
+ .name = "fcpci",
+ .probe = fritzpci_probe,
+ .remove = __devexit_p(fritz_remove_pci),
+ .id_table = fcpci_ids,
+};
+
+static int __init AVM_init(void)
+{
+ int err;
+
+ pr_notice("AVM Fritz PCI driver Rev. %s\n", AVMFRITZ_REV);
+ err = pci_register_driver(&fcpci_driver);
+ return err;
+}
+
+static void __exit AVM_cleanup(void)
+{
+ pci_unregister_driver(&fcpci_driver);
+}
+
+module_init(AVM_init);
+module_exit(AVM_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index e1dab30..faed794 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -3416,22 +3416,8 @@
u_long flags;
spin_lock_irqsave(&hc->lock, flags);
- if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
- dev_kfree_skb(bch->next_skb);
- bch->next_skb = NULL;
- }
- if (bch->tx_skb) {
- dev_kfree_skb(bch->tx_skb);
- bch->tx_skb = NULL;
- }
- bch->tx_idx = 0;
- if (bch->rx_skb) {
- dev_kfree_skb(bch->rx_skb);
- bch->rx_skb = NULL;
- }
+ mISDN_clear_bchannel(bch);
hc->chan[bch->slot].coeff_count = 0;
- test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
- test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
hc->chan[bch->slot].rx_off = 0;
hc->chan[bch->slot].conf = -1;
mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
@@ -5384,9 +5370,10 @@
ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
ent->device == PCI_DEVICE_ID_CCD_HFCE1)) {
printk(KERN_ERR
- "Unknown HFC multiport controller (vendor:%x device:%x "
- "subvendor:%x subdevice:%x)\n", ent->vendor, ent->device,
- ent->subvendor, ent->subdevice);
+ "Unknown HFC multiport controller (vendor:%04x device:%04x "
+ "subvendor:%04x subdevice:%04x)\n", pdev->vendor,
+ pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
printk(KERN_ERR
"Please contact the driver maintainer for support.\n");
return -ENODEV;
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 228ffbe..70e6b0e 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1522,22 +1522,8 @@
u_long flags;
spin_lock_irqsave(&hc->lock, flags);
- if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
- dev_kfree_skb(bch->next_skb);
- bch->next_skb = NULL;
- }
- if (bch->tx_skb) {
- dev_kfree_skb(bch->tx_skb);
- bch->tx_skb = NULL;
- }
- bch->tx_idx = 0;
- if (bch->rx_skb) {
- dev_kfree_skb(bch->rx_skb);
- bch->rx_skb = NULL;
- }
+ mISDN_clear_bchannel(bch);
mode_hfcpci(bch, bch->nr, ISDN_P_NONE);
- test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
- test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
spin_unlock_irqrestore(&hc->lock, flags);
}
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 6b7704c..fc46a26 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1809,21 +1809,7 @@
hw->name, __func__, bch->nr);
spin_lock_irqsave(&hw->lock, flags);
- if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
- dev_kfree_skb(bch->next_skb);
- bch->next_skb = NULL;
- }
- if (bch->tx_skb) {
- dev_kfree_skb(bch->tx_skb);
- bch->tx_skb = NULL;
- }
- bch->tx_idx = 0;
- if (bch->rx_skb) {
- dev_kfree_skb(bch->rx_skb);
- bch->rx_skb = NULL;
- }
- clear_bit(FLG_ACTIVE, &bch->Flags);
- clear_bit(FLG_TX_BUSY, &bch->Flags);
+ mISDN_clear_bchannel(bch);
spin_unlock_irqrestore(&hw->lock, flags);
hfcsusb_setup_bch(bch, ISDN_P_NONE);
hfcsusb_stop_endpoint(hw, bch->nr);
diff --git a/drivers/isdn/hardware/mISDN/iohelper.h b/drivers/isdn/hardware/mISDN/iohelper.h
new file mode 100644
index 0000000..b438981
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/iohelper.h
@@ -0,0 +1,109 @@
+/*
+ * iohelper.h
+ * helper for define functions to access ISDN hardware
+ * supported are memory mapped IO
+ * indirect port IO (one port for address, one for data)
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _IOHELPER_H
+#define _IOHELPER_H
+
+typedef u8 (read_reg_func)(void *hwp, u8 offset);
+typedef void (write_reg_func)(void *hwp, u8 offset, u8 value);
+typedef void (fifo_func)(void *hwp, u8 offset, u8 *datap, int size);
+
+struct _ioport {
+ u32 port;
+ u32 ale;
+};
+
+#define IOFUNC_IO(name, hws, ap) \
+ static u8 Read##name##_IO(void *p, u8 off) {\
+ struct hws *hw = p;\
+ return inb(hw->ap.port + off);\
+ } \
+ static void Write##name##_IO(void *p, u8 off, u8 val) {\
+ struct hws *hw = p;\
+ outb(val, hw->ap.port + off);\
+ } \
+ static void ReadFiFo##name##_IO(void *p, u8 off, u8 *dp, int size) {\
+ struct hws *hw = p;\
+ insb(hw->ap.port + off, dp, size);\
+ } \
+ static void WriteFiFo##name##_IO(void *p, u8 off, u8 *dp, int size) {\
+ struct hws *hw = p;\
+ outsb(hw->ap.port + off, dp, size);\
+ }
+
+#define IOFUNC_IND(name, hws, ap) \
+ static u8 Read##name##_IND(void *p, u8 off) {\
+ struct hws *hw = p;\
+ outb(off, hw->ap.ale);\
+ return inb(hw->ap.port);\
+ } \
+ static void Write##name##_IND(void *p, u8 off, u8 val) {\
+ struct hws *hw = p;\
+ outb(off, hw->ap.ale);\
+ outb(val, hw->ap.port);\
+ } \
+ static void ReadFiFo##name##_IND(void *p, u8 off, u8 *dp, int size) {\
+ struct hws *hw = p;\
+ outb(off, hw->ap.ale);\
+ insb(hw->ap.port, dp, size);\
+ } \
+ static void WriteFiFo##name##_IND(void *p, u8 off, u8 *dp, int size) {\
+ struct hws *hw = p;\
+ outb(off, hw->ap.ale);\
+ outsb(hw->ap.port, dp, size);\
+ }
+
+#define IOFUNC_MEMIO(name, hws, typ, adr) \
+ static u8 Read##name##_MIO(void *p, u8 off) {\
+ struct hws *hw = p;\
+ return readb(((typ *)hw->adr) + off);\
+ } \
+ static void Write##name##_MIO(void *p, u8 off, u8 val) {\
+ struct hws *hw = p;\
+ writeb(val, ((typ *)hw->adr) + off);\
+ } \
+ static void ReadFiFo##name##_MIO(void *p, u8 off, u8 *dp, int size) {\
+ struct hws *hw = p;\
+ while (size--)\
+ *dp++ = readb(((typ *)hw->adr) + off);\
+ } \
+ static void WriteFiFo##name##_MIO(void *p, u8 off, u8 *dp, int size) {\
+ struct hws *hw = p;\
+ while (size--)\
+ writeb(*dp++, ((typ *)hw->adr) + off);\
+ }
+
+#define ASSIGN_FUNC(typ, name, dest) do {\
+ dest.read_reg = &Read##name##_##typ;\
+ dest.write_reg = &Write##name##_##typ;\
+ dest.read_fifo = &ReadFiFo##name##_##typ;\
+ dest.write_fifo = &WriteFiFo##name##_##typ;\
+ } while (0)
+#define ASSIGN_FUNC_IPAC(typ, target) do {\
+ ASSIGN_FUNC(typ, ISAC, target.isac);\
+ ASSIGN_FUNC(typ, IPAC, target);\
+ } while (0)
+
+#endif
diff --git a/drivers/isdn/hardware/mISDN/ipac.h b/drivers/isdn/hardware/mISDN/ipac.h
new file mode 100644
index 0000000..74a6ccf
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/ipac.h
@@ -0,0 +1,405 @@
+/*
+ *
+ * ipac.h Defines for the Infineon (former Siemens) ISDN
+ * chip series
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "iohelper.h"
+
+struct isac_hw {
+ struct dchannel dch;
+ u32 type;
+ u32 off; /* offset to isac regs */
+ char *name;
+ spinlock_t *hwlock; /* lock HW acccess */
+ read_reg_func *read_reg;
+ write_reg_func *write_reg;
+ fifo_func *read_fifo;
+ fifo_func *write_fifo;
+ int (*monitor)(void *, u32, u8 *, int);
+ void (*release)(struct isac_hw *);
+ int (*init)(struct isac_hw *);
+ int (*ctrl)(struct isac_hw *, u32, u_long);
+ int (*open)(struct isac_hw *, struct channel_req *);
+ u8 *mon_tx;
+ u8 *mon_rx;
+ int mon_txp;
+ int mon_txc;
+ int mon_rxp;
+ struct arcofi_msg *arcofi_list;
+ struct timer_list arcofitimer;
+ wait_queue_head_t arcofi_wait;
+ u8 arcofi_bc;
+ u8 arcofi_state;
+ u8 mocr;
+ u8 adf2;
+ u8 state;
+};
+
+struct ipac_hw;
+
+struct hscx_hw {
+ struct bchannel bch;
+ struct ipac_hw *ip;
+ u8 fifo_size;
+ u8 off; /* offset to ICA or ICB */
+ u8 slot;
+ char log[64];
+};
+
+struct ipac_hw {
+ struct isac_hw isac;
+ struct hscx_hw hscx[2];
+ char *name;
+ void *hw;
+ spinlock_t *hwlock; /* lock HW acccess */
+ struct module *owner;
+ u32 type;
+ read_reg_func *read_reg;
+ write_reg_func *write_reg;
+ fifo_func *read_fifo;
+ fifo_func *write_fifo;
+ void (*release)(struct ipac_hw *);
+ int (*init)(struct ipac_hw *);
+ int (*ctrl)(struct ipac_hw *, u32, u_long);
+ u8 conf;
+};
+
+#define IPAC_TYPE_ISAC 0x0010
+#define IPAC_TYPE_IPAC 0x0020
+#define IPAC_TYPE_ISACX 0x0040
+#define IPAC_TYPE_IPACX 0x0080
+#define IPAC_TYPE_HSCX 0x0100
+
+#define ISAC_USE_ARCOFI 0x1000
+
+/* Monitor functions */
+#define MONITOR_RX_0 0x1000
+#define MONITOR_RX_1 0x1001
+#define MONITOR_TX_0 0x2000
+#define MONITOR_TX_1 0x2001
+
+/* All registers original Siemens Spec */
+/* IPAC/ISAC registers */
+#define ISAC_MASK 0x20
+#define ISAC_ISTA 0x20
+#define ISAC_STAR 0x21
+#define ISAC_CMDR 0x21
+#define ISAC_EXIR 0x24
+#define ISAC_ADF2 0x39
+#define ISAC_SPCR 0x30
+#define ISAC_ADF1 0x38
+#define ISAC_CIR0 0x31
+#define ISAC_CIX0 0x31
+#define ISAC_CIR1 0x33
+#define ISAC_CIX1 0x33
+#define ISAC_STCR 0x37
+#define ISAC_MODE 0x22
+#define ISAC_RSTA 0x27
+#define ISAC_RBCL 0x25
+#define ISAC_RBCH 0x2A
+#define ISAC_TIMR 0x23
+#define ISAC_SQXR 0x3b
+#define ISAC_SQRR 0x3b
+#define ISAC_MOSR 0x3a
+#define ISAC_MOCR 0x3a
+#define ISAC_MOR0 0x32
+#define ISAC_MOX0 0x32
+#define ISAC_MOR1 0x34
+#define ISAC_MOX1 0x34
+
+#define ISAC_RBCH_XAC 0x80
+
+#define IPAC_D_TIN2 0x01
+
+/* IPAC/HSCX */
+#define IPAC_ISTAB 0x20 /* RD */
+#define IPAC_MASKB 0x20 /* WR */
+#define IPAC_STARB 0x21 /* RD */
+#define IPAC_CMDRB 0x21 /* WR */
+#define IPAC_MODEB 0x22 /* R/W */
+#define IPAC_EXIRB 0x24 /* RD */
+#define IPAC_RBCLB 0x25 /* RD */
+#define IPAC_RAH1 0x26 /* WR */
+#define IPAC_RAH2 0x27 /* WR */
+#define IPAC_RSTAB 0x27 /* RD */
+#define IPAC_RAL1 0x28 /* R/W */
+#define IPAC_RAL2 0x29 /* WR */
+#define IPAC_RHCRB 0x29 /* RD */
+#define IPAC_XBCL 0x2A /* WR */
+#define IPAC_CCR2 0x2C /* R/W */
+#define IPAC_RBCHB 0x2D /* RD */
+#define IPAC_XBCH 0x2D /* WR */
+#define HSCX_VSTR 0x2E /* RD */
+#define IPAC_RLCR 0x2E /* WR */
+#define IPAC_CCR1 0x2F /* R/W */
+#define IPAC_TSAX 0x30 /* WR */
+#define IPAC_TSAR 0x31 /* WR */
+#define IPAC_XCCR 0x32 /* WR */
+#define IPAC_RCCR 0x33 /* WR */
+
+/* IPAC_ISTAB/IPAC_MASKB bits */
+#define IPAC_B_XPR 0x10
+#define IPAC_B_RPF 0x40
+#define IPAC_B_RME 0x80
+#define IPAC_B_ON 0x2F
+
+/* IPAC_EXIRB bits */
+#define IPAC_B_RFS 0x04
+#define IPAC_B_RFO 0x10
+#define IPAC_B_XDU 0x40
+#define IPAC_B_XMR 0x80
+
+/* IPAC special registers */
+#define IPAC_CONF 0xC0 /* R/W */
+#define IPAC_ISTA 0xC1 /* RD */
+#define IPAC_MASK 0xC1 /* WR */
+#define IPAC_ID 0xC2 /* RD */
+#define IPAC_ACFG 0xC3 /* R/W */
+#define IPAC_AOE 0xC4 /* R/W */
+#define IPAC_ARX 0xC5 /* RD */
+#define IPAC_ATX 0xC5 /* WR */
+#define IPAC_PITA1 0xC6 /* R/W */
+#define IPAC_PITA2 0xC7 /* R/W */
+#define IPAC_POTA1 0xC8 /* R/W */
+#define IPAC_POTA2 0xC9 /* R/W */
+#define IPAC_PCFG 0xCA /* R/W */
+#define IPAC_SCFG 0xCB /* R/W */
+#define IPAC_TIMR2 0xCC /* R/W */
+
+/* IPAC_ISTA/_MASK bits */
+#define IPAC__EXB 0x01
+#define IPAC__ICB 0x02
+#define IPAC__EXA 0x04
+#define IPAC__ICA 0x08
+#define IPAC__EXD 0x10
+#define IPAC__ICD 0x20
+#define IPAC__INT0 0x40
+#define IPAC__INT1 0x80
+#define IPAC__ON 0xC0
+
+/* HSCX ISTA/MASK bits */
+#define HSCX__EXB 0x01
+#define HSCX__EXA 0x02
+#define HSCX__ICA 0x04
+
+/* ISAC/ISACX/IPAC/IPACX L1 commands */
+#define ISAC_CMD_TIM 0x0
+#define ISAC_CMD_RS 0x1
+#define ISAC_CMD_SCZ 0x4
+#define ISAC_CMD_SSZ 0x2
+#define ISAC_CMD_AR8 0x8
+#define ISAC_CMD_AR10 0x9
+#define ISAC_CMD_ARL 0xA
+#define ISAC_CMD_DUI 0xF
+
+/* ISAC/ISACX/IPAC/IPACX L1 indications */
+#define ISAC_IND_RS 0x1
+#define ISAC_IND_PU 0x7
+#define ISAC_IND_DR 0x0
+#define ISAC_IND_SD 0x2
+#define ISAC_IND_DIS 0x3
+#define ISAC_IND_EI 0x6
+#define ISAC_IND_RSY 0x4
+#define ISAC_IND_ARD 0x8
+#define ISAC_IND_TI 0xA
+#define ISAC_IND_ATI 0xB
+#define ISAC_IND_AI8 0xC
+#define ISAC_IND_AI10 0xD
+#define ISAC_IND_DID 0xF
+
+/* the new ISACX / IPACX */
+/* D-channel registers */
+#define ISACX_RFIFOD 0x00 /* RD */
+#define ISACX_XFIFOD 0x00 /* WR */
+#define ISACX_ISTAD 0x20 /* RD */
+#define ISACX_MASKD 0x20 /* WR */
+#define ISACX_STARD 0x21 /* RD */
+#define ISACX_CMDRD 0x21 /* WR */
+#define ISACX_MODED 0x22 /* R/W */
+#define ISACX_EXMD1 0x23 /* R/W */
+#define ISACX_TIMR1 0x24 /* R/W */
+#define ISACX_SAP1 0x25 /* WR */
+#define ISACX_SAP2 0x26 /* WR */
+#define ISACX_RBCLD 0x26 /* RD */
+#define ISACX_RBCHD 0x27 /* RD */
+#define ISACX_TEI1 0x27 /* WR */
+#define ISACX_TEI2 0x28 /* WR */
+#define ISACX_RSTAD 0x28 /* RD */
+#define ISACX_TMD 0x29 /* R/W */
+#define ISACX_CIR0 0x2E /* RD */
+#define ISACX_CIX0 0x2E /* WR */
+#define ISACX_CIR1 0x2F /* RD */
+#define ISACX_CIX1 0x2F /* WR */
+
+/* Transceiver registers */
+#define ISACX_TR_CONF0 0x30 /* R/W */
+#define ISACX_TR_CONF1 0x31 /* R/W */
+#define ISACX_TR_CONF2 0x32 /* R/W */
+#define ISACX_TR_STA 0x33 /* RD */
+#define ISACX_TR_CMD 0x34 /* R/W */
+#define ISACX_SQRR1 0x35 /* RD */
+#define ISACX_SQXR1 0x35 /* WR */
+#define ISACX_SQRR2 0x36 /* RD */
+#define ISACX_SQXR2 0x36 /* WR */
+#define ISACX_SQRR3 0x37 /* RD */
+#define ISACX_SQXR3 0x37 /* WR */
+#define ISACX_ISTATR 0x38 /* RD */
+#define ISACX_MASKTR 0x39 /* R/W */
+#define ISACX_TR_MODE 0x3A /* R/W */
+#define ISACX_ACFG1 0x3C /* R/W */
+#define ISACX_ACFG2 0x3D /* R/W */
+#define ISACX_AOE 0x3E /* R/W */
+#define ISACX_ARX 0x3F /* RD */
+#define ISACX_ATX 0x3F /* WR */
+
+/* IOM: Timeslot, DPS, CDA */
+#define ISACX_CDA10 0x40 /* R/W */
+#define ISACX_CDA11 0x41 /* R/W */
+#define ISACX_CDA20 0x42 /* R/W */
+#define ISACX_CDA21 0x43 /* R/W */
+#define ISACX_CDA_TSDP10 0x44 /* R/W */
+#define ISACX_CDA_TSDP11 0x45 /* R/W */
+#define ISACX_CDA_TSDP20 0x46 /* R/W */
+#define ISACX_CDA_TSDP21 0x47 /* R/W */
+#define ISACX_BCHA_TSDP_BC1 0x48 /* R/W */
+#define ISACX_BCHA_TSDP_BC2 0x49 /* R/W */
+#define ISACX_BCHB_TSDP_BC1 0x4A /* R/W */
+#define ISACX_BCHB_TSDP_BC2 0x4B /* R/W */
+#define ISACX_TR_TSDP_BC1 0x4C /* R/W */
+#define ISACX_TR_TSDP_BC2 0x4D /* R/W */
+#define ISACX_CDA1_CR 0x4E /* R/W */
+#define ISACX_CDA2_CR 0x4F /* R/W */
+
+/* IOM: Contol, Sync transfer, Monitor */
+#define ISACX_TR_CR 0x50 /* R/W */
+#define ISACX_TRC_CR 0x50 /* R/W */
+#define ISACX_BCHA_CR 0x51 /* R/W */
+#define ISACX_BCHB_CR 0x52 /* R/W */
+#define ISACX_DCI_CR 0x53 /* R/W */
+#define ISACX_DCIC_CR 0x53 /* R/W */
+#define ISACX_MON_CR 0x54 /* R/W */
+#define ISACX_SDS1_CR 0x55 /* R/W */
+#define ISACX_SDS2_CR 0x56 /* R/W */
+#define ISACX_IOM_CR 0x57 /* R/W */
+#define ISACX_STI 0x58 /* RD */
+#define ISACX_ASTI 0x58 /* WR */
+#define ISACX_MSTI 0x59 /* R/W */
+#define ISACX_SDS_CONF 0x5A /* R/W */
+#define ISACX_MCDA 0x5B /* RD */
+#define ISACX_MOR 0x5C /* RD */
+#define ISACX_MOX 0x5C /* WR */
+#define ISACX_MOSR 0x5D /* RD */
+#define ISACX_MOCR 0x5E /* R/W */
+#define ISACX_MSTA 0x5F /* RD */
+#define ISACX_MCONF 0x5F /* WR */
+
+/* Interrupt and general registers */
+#define ISACX_ISTA 0x60 /* RD */
+#define ISACX_MASK 0x60 /* WR */
+#define ISACX_AUXI 0x61 /* RD */
+#define ISACX_AUXM 0x61 /* WR */
+#define ISACX_MODE1 0x62 /* R/W */
+#define ISACX_MODE2 0x63 /* R/W */
+#define ISACX_ID 0x64 /* RD */
+#define ISACX_SRES 0x64 /* WR */
+#define ISACX_TIMR2 0x65 /* R/W */
+
+/* Register Bits */
+/* ISACX/IPACX _ISTAD (R) and _MASKD (W) */
+#define ISACX_D_XDU 0x04
+#define ISACX_D_XMR 0x08
+#define ISACX_D_XPR 0x10
+#define ISACX_D_RFO 0x20
+#define ISACX_D_RPF 0x40
+#define ISACX_D_RME 0x80
+
+/* ISACX/IPACX _ISTA (R) and _MASK (W) */
+#define ISACX__ICD 0x01
+#define ISACX__MOS 0x02
+#define ISACX__TRAN 0x04
+#define ISACX__AUX 0x08
+#define ISACX__CIC 0x10
+#define ISACX__ST 0x20
+#define IPACX__ICB 0x40
+#define IPACX__ICA 0x80
+#define IPACX__ON 0x2C
+
+/* ISACX/IPACX _CMDRD (W) */
+#define ISACX_CMDRD_XRES 0x01
+#define ISACX_CMDRD_XME 0x02
+#define ISACX_CMDRD_XTF 0x08
+#define ISACX_CMDRD_STI 0x10
+#define ISACX_CMDRD_RRES 0x40
+#define ISACX_CMDRD_RMC 0x80
+
+/* ISACX/IPACX _RSTAD (R) */
+#define ISACX_RSTAD_TA 0x01
+#define ISACX_RSTAD_CR 0x02
+#define ISACX_RSTAD_SA0 0x04
+#define ISACX_RSTAD_SA1 0x08
+#define ISACX_RSTAD_RAB 0x10
+#define ISACX_RSTAD_CRC 0x20
+#define ISACX_RSTAD_RDO 0x40
+#define ISACX_RSTAD_VFR 0x80
+
+/* ISACX/IPACX _CIR0 (R) */
+#define ISACX_CIR0_BAS 0x01
+#define ISACX_CIR0_SG 0x08
+#define ISACX_CIR0_CIC1 0x08
+#define ISACX_CIR0_CIC0 0x08
+
+/* B-channel registers */
+#define IPACX_OFF_ICA 0x70
+#define IPACX_OFF_ICB 0x80
+
+/* ICA: IPACX_OFF_ICA + Reg ICB: IPACX_OFF_ICB + Reg */
+
+#define IPACX_ISTAB 0x00 /* RD */
+#define IPACX_MASKB 0x00 /* WR */
+#define IPACX_STARB 0x01 /* RD */
+#define IPACX_CMDRB 0x01 /* WR */
+#define IPACX_MODEB 0x02 /* R/W */
+#define IPACX_EXMB 0x03 /* R/W */
+#define IPACX_RAH1 0x05 /* WR */
+#define IPACX_RAH2 0x06 /* WR */
+#define IPACX_RBCLB 0x06 /* RD */
+#define IPACX_RBCHB 0x07 /* RD */
+#define IPACX_RAL1 0x07 /* WR */
+#define IPACX_RAL2 0x08 /* WR */
+#define IPACX_RSTAB 0x08 /* RD */
+#define IPACX_TMB 0x09 /* R/W */
+#define IPACX_RFIFOB 0x0A /* RD */
+#define IPACX_XFIFOB 0x0A /* WR */
+
+/* IPACX_ISTAB / IPACX_MASKB bits */
+#define IPACX_B_XDU 0x04
+#define IPACX_B_XPR 0x10
+#define IPACX_B_RFO 0x20
+#define IPACX_B_RPF 0x40
+#define IPACX_B_RME 0x80
+
+#define IPACX_B_ON 0x0B
+
+extern int mISDNisac_init(struct isac_hw *, void *);
+extern irqreturn_t mISDNisac_irq(struct isac_hw *, u8);
+extern u32 mISDNipac_init(struct ipac_hw *, void *);
+extern irqreturn_t mISDNipac_irq(struct ipac_hw *, int);
diff --git a/drivers/isdn/hardware/mISDN/isar.h b/drivers/isdn/hardware/mISDN/isar.h
new file mode 100644
index 0000000..4a134ac
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/isar.h
@@ -0,0 +1,269 @@
+/*
+ *
+ * isar.h ISAR (Siemens PSB 7110) specific defines
+ *
+ * Author Karsten Keil (keil@isdn4linux.de)
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "iohelper.h"
+
+struct isar_hw;
+
+struct isar_ch {
+ struct bchannel bch;
+ struct isar_hw *is;
+ struct timer_list ftimer;
+ u8 nr;
+ u8 dpath;
+ u8 mml;
+ u8 state;
+ u8 cmd;
+ u8 mod;
+ u8 newcmd;
+ u8 newmod;
+ u8 try_mod;
+ u8 conmsg[16];
+};
+
+struct isar_hw {
+ struct isar_ch ch[2];
+ void *hw;
+ spinlock_t *hwlock; /* lock HW acccess */
+ char *name;
+ struct module *owner;
+ read_reg_func *read_reg;
+ write_reg_func *write_reg;
+ fifo_func *read_fifo;
+ fifo_func *write_fifo;
+ int (*ctrl)(void *, u32, u_long);
+ void (*release)(struct isar_hw *);
+ int (*init)(struct isar_hw *);
+ int (*open)(struct isar_hw *, struct channel_req *);
+ int (*firmware)(struct isar_hw *, const u8 *, int);
+ unsigned long Flags;
+ int version;
+ u8 bstat;
+ u8 iis;
+ u8 cmsb;
+ u8 clsb;
+ u8 buf[256];
+ u8 log[256];
+};
+
+#define ISAR_IRQMSK 0x04
+#define ISAR_IRQSTA 0x04
+#define ISAR_IRQBIT 0x75
+#define ISAR_CTRL_H 0x61
+#define ISAR_CTRL_L 0x60
+#define ISAR_IIS 0x58
+#define ISAR_IIA 0x58
+#define ISAR_HIS 0x50
+#define ISAR_HIA 0x50
+#define ISAR_MBOX 0x4c
+#define ISAR_WADR 0x4a
+#define ISAR_RADR 0x48
+
+#define ISAR_HIS_VNR 0x14
+#define ISAR_HIS_DKEY 0x02
+#define ISAR_HIS_FIRM 0x1e
+#define ISAR_HIS_STDSP 0x08
+#define ISAR_HIS_DIAG 0x05
+#define ISAR_HIS_P0CFG 0x3c
+#define ISAR_HIS_P12CFG 0x24
+#define ISAR_HIS_SARTCFG 0x25
+#define ISAR_HIS_PUMPCFG 0x26
+#define ISAR_HIS_PUMPCTRL 0x2a
+#define ISAR_HIS_IOM2CFG 0x27
+#define ISAR_HIS_IOM2REQ 0x07
+#define ISAR_HIS_IOM2CTRL 0x2b
+#define ISAR_HIS_BSTREQ 0x0c
+#define ISAR_HIS_PSTREQ 0x0e
+#define ISAR_HIS_SDATA 0x20
+#define ISAR_HIS_DPS1 0x40
+#define ISAR_HIS_DPS2 0x80
+#define SET_DPS(x) ((x<<6) & 0xc0)
+
+#define ISAR_IIS_MSCMSD 0x3f
+#define ISAR_IIS_VNR 0x15
+#define ISAR_IIS_DKEY 0x03
+#define ISAR_IIS_FIRM 0x1f
+#define ISAR_IIS_STDSP 0x09
+#define ISAR_IIS_DIAG 0x25
+#define ISAR_IIS_GSTEV 0x00
+#define ISAR_IIS_BSTEV 0x28
+#define ISAR_IIS_BSTRSP 0x2c
+#define ISAR_IIS_PSTRSP 0x2e
+#define ISAR_IIS_PSTEV 0x2a
+#define ISAR_IIS_IOM2RSP 0x27
+#define ISAR_IIS_RDATA 0x20
+#define ISAR_IIS_INVMSG 0x3f
+
+#define ISAR_CTRL_SWVER 0x10
+#define ISAR_CTRL_STST 0x40
+
+#define ISAR_MSG_HWVER 0x20
+
+#define ISAR_DP1_USE 1
+#define ISAR_DP2_USE 2
+#define ISAR_RATE_REQ 3
+
+#define PMOD_DISABLE 0
+#define PMOD_FAX 1
+#define PMOD_DATAMODEM 2
+#define PMOD_HALFDUPLEX 3
+#define PMOD_V110 4
+#define PMOD_DTMF 5
+#define PMOD_DTMF_TRANS 6
+#define PMOD_BYPASS 7
+
+#define PCTRL_ORIG 0x80
+#define PV32P2_V23R 0x40
+#define PV32P2_V22A 0x20
+#define PV32P2_V22B 0x10
+#define PV32P2_V22C 0x08
+#define PV32P2_V21 0x02
+#define PV32P2_BEL 0x01
+
+/* LSB MSB in ISAR doc wrong !!! Arghhh */
+#define PV32P3_AMOD 0x80
+#define PV32P3_V32B 0x02
+#define PV32P3_V23B 0x01
+#define PV32P4_48 0x11
+#define PV32P5_48 0x05
+#define PV32P4_UT48 0x11
+#define PV32P5_UT48 0x0d
+#define PV32P4_96 0x11
+#define PV32P5_96 0x03
+#define PV32P4_UT96 0x11
+#define PV32P5_UT96 0x0f
+#define PV32P4_B96 0x91
+#define PV32P5_B96 0x0b
+#define PV32P4_UTB96 0xd1
+#define PV32P5_UTB96 0x0f
+#define PV32P4_120 0xb1
+#define PV32P5_120 0x09
+#define PV32P4_UT120 0xf1
+#define PV32P5_UT120 0x0f
+#define PV32P4_144 0x99
+#define PV32P5_144 0x09
+#define PV32P4_UT144 0xf9
+#define PV32P5_UT144 0x0f
+#define PV32P6_CTN 0x01
+#define PV32P6_ATN 0x02
+
+#define PFAXP2_CTN 0x01
+#define PFAXP2_ATN 0x04
+
+#define PSEV_10MS_TIMER 0x02
+#define PSEV_CON_ON 0x18
+#define PSEV_CON_OFF 0x19
+#define PSEV_V24_OFF 0x20
+#define PSEV_CTS_ON 0x21
+#define PSEV_CTS_OFF 0x22
+#define PSEV_DCD_ON 0x23
+#define PSEV_DCD_OFF 0x24
+#define PSEV_DSR_ON 0x25
+#define PSEV_DSR_OFF 0x26
+#define PSEV_REM_RET 0xcc
+#define PSEV_REM_REN 0xcd
+#define PSEV_GSTN_CLR 0xd4
+
+#define PSEV_RSP_READY 0xbc
+#define PSEV_LINE_TX_H 0xb3
+#define PSEV_LINE_TX_B 0xb2
+#define PSEV_LINE_RX_H 0xb1
+#define PSEV_LINE_RX_B 0xb0
+#define PSEV_RSP_CONN 0xb5
+#define PSEV_RSP_DISC 0xb7
+#define PSEV_RSP_FCERR 0xb9
+#define PSEV_RSP_SILDET 0xbe
+#define PSEV_RSP_SILOFF 0xab
+#define PSEV_FLAGS_DET 0xba
+
+#define PCTRL_CMD_TDTMF 0x5a
+
+#define PCTRL_CMD_FTH 0xa7
+#define PCTRL_CMD_FRH 0xa5
+#define PCTRL_CMD_FTM 0xa8
+#define PCTRL_CMD_FRM 0xa6
+#define PCTRL_CMD_SILON 0xac
+#define PCTRL_CMD_CONT 0xa2
+#define PCTRL_CMD_ESC 0xa4
+#define PCTRL_CMD_SILOFF 0xab
+#define PCTRL_CMD_HALT 0xa9
+
+#define PCTRL_LOC_RET 0xcf
+#define PCTRL_LOC_REN 0xce
+
+#define SMODE_DISABLE 0
+#define SMODE_V14 2
+#define SMODE_HDLC 3
+#define SMODE_BINARY 4
+#define SMODE_FSK_V14 5
+
+#define SCTRL_HDMC_BOTH 0x00
+#define SCTRL_HDMC_DTX 0x80
+#define SCTRL_HDMC_DRX 0x40
+#define S_P1_OVSP 0x40
+#define S_P1_SNP 0x20
+#define S_P1_EOP 0x10
+#define S_P1_EDP 0x08
+#define S_P1_NSB 0x04
+#define S_P1_CHS_8 0x03
+#define S_P1_CHS_7 0x02
+#define S_P1_CHS_6 0x01
+#define S_P1_CHS_5 0x00
+
+#define S_P2_BFT_DEF 0x10
+
+#define IOM_CTRL_ENA 0x80
+#define IOM_CTRL_NOPCM 0x00
+#define IOM_CTRL_ALAW 0x02
+#define IOM_CTRL_ULAW 0x04
+#define IOM_CTRL_RCV 0x01
+
+#define IOM_P1_TXD 0x10
+
+#define HDLC_FED 0x40
+#define HDLC_FSD 0x20
+#define HDLC_FST 0x20
+#define HDLC_ERROR 0x1c
+#define HDLC_ERR_FAD 0x10
+#define HDLC_ERR_RER 0x08
+#define HDLC_ERR_CER 0x04
+#define SART_NMD 0x01
+
+#define BSTAT_RDM0 0x1
+#define BSTAT_RDM1 0x2
+#define BSTAT_RDM2 0x4
+#define BSTAT_RDM3 0x8
+#define BSTEV_TBO 0x1f
+#define BSTEV_RBO 0x2f
+
+/* FAX State Machine */
+#define STFAX_NULL 0
+#define STFAX_READY 1
+#define STFAX_LINE 2
+#define STFAX_CONT 3
+#define STFAX_ACTIV 4
+#define STFAX_ESCAPE 5
+#define STFAX_SILDET 6
+
+extern u32 mISDNisar_init(struct isar_hw *, void *);
+extern void mISDNisar_irq(struct isar_hw *);
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
new file mode 100644
index 0000000..62441ba
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -0,0 +1,1178 @@
+/*
+ * mISDNinfineon.c
+ * Support for cards based on following Infineon ISDN chipsets
+ * - ISAC + HSCX
+ * - IPAC and IPAC-X
+ * - ISAC-SX + HSCX
+ *
+ * Supported cards:
+ * - Dialogic Diva 2.0
+ * - Dialogic Diva 2.0U
+ * - Dialogic Diva 2.01
+ * - Dialogic Diva 2.02
+ * - Sedlbauer Speedwin
+ * - HST Saphir3
+ * - Develo (former ELSA) Microlink PCI (Quickstep 1000)
+ * - Develo (former ELSA) Quickstep 3000
+ * - Berkom Scitel BRIX Quadro
+ * - Dr.Neuhaus (Sagem) Niccy
+ *
+ *
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include "ipac.h"
+
+#define INFINEON_REV "1.0"
+
+static int inf_cnt;
+static u32 debug;
+static u32 irqloops = 4;
+
+enum inf_types {
+ INF_NONE,
+ INF_DIVA20,
+ INF_DIVA20U,
+ INF_DIVA201,
+ INF_DIVA202,
+ INF_SPEEDWIN,
+ INF_SAPHIR3,
+ INF_QS1000,
+ INF_QS3000,
+ INF_NICCY,
+ INF_SCT_1,
+ INF_SCT_2,
+ INF_SCT_3,
+ INF_SCT_4,
+ INF_GAZEL_R685,
+ INF_GAZEL_R753
+};
+
+enum addr_mode {
+ AM_NONE = 0,
+ AM_IO,
+ AM_MEMIO,
+ AM_IND_IO,
+};
+
+struct inf_cinfo {
+ enum inf_types typ;
+ const char *full;
+ const char *name;
+ enum addr_mode cfg_mode;
+ enum addr_mode addr_mode;
+ u8 cfg_bar;
+ u8 addr_bar;
+ void *irqfunc;
+};
+
+struct _ioaddr {
+ enum addr_mode mode;
+ union {
+ void __iomem *p;
+ struct _ioport io;
+ } a;
+};
+
+struct _iohandle {
+ enum addr_mode mode;
+ resource_size_t size;
+ resource_size_t start;
+ void __iomem *p;
+};
+
+struct inf_hw {
+ struct list_head list;
+ struct pci_dev *pdev;
+ const struct inf_cinfo *ci;
+ char name[MISDN_MAX_IDLEN];
+ u32 irq;
+ u32 irqcnt;
+ struct _iohandle cfg;
+ struct _iohandle addr;
+ struct _ioaddr isac;
+ struct _ioaddr hscx;
+ spinlock_t lock; /* HW access lock */
+ struct ipac_hw ipac;
+ struct inf_hw *sc[3]; /* slave cards */
+};
+
+
+#define PCI_SUBVENDOR_HST_SAPHIR3 0x52
+#define PCI_SUBVENDOR_SEDLBAUER_PCI 0x53
+#define PCI_SUB_ID_SEDLBAUER 0x01
+
+static struct pci_device_id infineon_ids[] __devinitdata = {
+ { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA20},
+ { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA20_U,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA20U},
+ { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA201,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA201},
+ { PCI_VENDOR_ID_EICON, PCI_DEVICE_ID_EICON_DIVA202,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_DIVA202},
+ { PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100,
+ PCI_SUBVENDOR_SEDLBAUER_PCI, PCI_SUB_ID_SEDLBAUER, 0, 0,
+ INF_SPEEDWIN},
+ { PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100,
+ PCI_SUBVENDOR_HST_SAPHIR3, PCI_SUB_ID_SEDLBAUER, 0, 0, INF_SAPHIR3},
+ { PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_MICROLINK,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_QS1000},
+ { PCI_VENDOR_ID_ELSA, PCI_DEVICE_ID_ELSA_QS3000,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_QS3000},
+ { PCI_VENDOR_ID_SATSAGEM, PCI_DEVICE_ID_SATSAGEM_NICCY,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_NICCY},
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO, 0, 0,
+ INF_SCT_1},
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_R685,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R685},
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_R753,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R753},
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_DJINN_ITOO,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R753},
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_OLITEC,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, INF_GAZEL_R753},
+ { }
+};
+MODULE_DEVICE_TABLE(pci, infineon_ids);
+
+/* PCI interface specific defines */
+/* Diva 2.0/2.0U */
+#define DIVA_HSCX_PORT 0x00
+#define DIVA_HSCX_ALE 0x04
+#define DIVA_ISAC_PORT 0x08
+#define DIVA_ISAC_ALE 0x0C
+#define DIVA_PCI_CTRL 0x10
+
+/* DIVA_PCI_CTRL bits */
+#define DIVA_IRQ_BIT 0x01
+#define DIVA_RESET_BIT 0x08
+#define DIVA_EEPROM_CLK 0x40
+#define DIVA_LED_A 0x10
+#define DIVA_LED_B 0x20
+#define DIVA_IRQ_CLR 0x80
+
+/* Diva 2.01/2.02 */
+/* Siemens PITA */
+#define PITA_ICR_REG 0x00
+#define PITA_INT0_STATUS 0x02
+
+#define PITA_MISC_REG 0x1c
+#define PITA_PARA_SOFTRESET 0x01000000
+#define PITA_SER_SOFTRESET 0x02000000
+#define PITA_PARA_MPX_MODE 0x04000000
+#define PITA_INT0_ENABLE 0x00020000
+
+/* TIGER 100 Registers */
+#define TIGER_RESET_ADDR 0x00
+#define TIGER_EXTERN_RESET 0x01
+#define TIGER_AUX_CTRL 0x02
+#define TIGER_AUX_DATA 0x03
+#define TIGER_AUX_IRQMASK 0x05
+#define TIGER_AUX_STATUS 0x07
+
+/* Tiger AUX BITs */
+#define TIGER_IOMASK 0xdd /* 1 and 5 are inputs */
+#define TIGER_IRQ_BIT 0x02
+
+#define TIGER_IPAC_ALE 0xC0
+#define TIGER_IPAC_PORT 0xC8
+
+/* ELSA (now Develo) PCI cards */
+#define ELSA_IRQ_ADDR 0x4c
+#define ELSA_IRQ_MASK 0x04
+#define QS1000_IRQ_OFF 0x01
+#define QS3000_IRQ_OFF 0x03
+#define QS1000_IRQ_ON 0x41
+#define QS3000_IRQ_ON 0x43
+
+/* Dr Neuhaus/Sagem Niccy */
+#define NICCY_ISAC_PORT 0x00
+#define NICCY_HSCX_PORT 0x01
+#define NICCY_ISAC_ALE 0x02
+#define NICCY_HSCX_ALE 0x03
+
+#define NICCY_IRQ_CTRL_REG 0x38
+#define NICCY_IRQ_ENABLE 0x001f00
+#define NICCY_IRQ_DISABLE 0xff0000
+#define NICCY_IRQ_BIT 0x800000
+
+
+/* Scitel PLX */
+#define SCT_PLX_IRQ_ADDR 0x4c
+#define SCT_PLX_RESET_ADDR 0x50
+#define SCT_PLX_IRQ_ENABLE 0x41
+#define SCT_PLX_RESET_BIT 0x04
+
+/* Gazel */
+#define GAZEL_IPAC_DATA_PORT 0x04
+/* Gazel PLX */
+#define GAZEL_CNTRL 0x50
+#define GAZEL_RESET 0x04
+#define GAZEL_RESET_9050 0x40000000
+#define GAZEL_INCSR 0x4C
+#define GAZEL_ISAC_EN 0x08
+#define GAZEL_INT_ISAC 0x20
+#define GAZEL_HSCX_EN 0x01
+#define GAZEL_INT_HSCX 0x04
+#define GAZEL_PCI_EN 0x40
+#define GAZEL_IPAC_EN 0x03
+
+
+static LIST_HEAD(Cards);
+static DEFINE_RWLOCK(card_lock); /* protect Cards */
+
+static void
+_set_debug(struct inf_hw *card)
+{
+ card->ipac.isac.dch.debug = debug;
+ card->ipac.hscx[0].bch.debug = debug;
+ card->ipac.hscx[1].bch.debug = debug;
+}
+
+static int
+set_debug(const char *val, struct kernel_param *kp)
+{
+ int ret;
+ struct inf_hw *card;
+
+ ret = param_set_uint(val, kp);
+ if (!ret) {
+ read_lock(&card_lock);
+ list_for_each_entry(card, &Cards, list)
+ _set_debug(card);
+ read_unlock(&card_lock);
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(INFINEON_REV);
+module_param_call(debug, set_debug, param_get_uint, &debug, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "infineon debug mask");
+module_param(irqloops, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(irqloops, "infineon maximal irqloops (default 4)");
+
+/* Interface functions */
+
+IOFUNC_IO(ISAC, inf_hw, isac.a.io)
+IOFUNC_IO(IPAC, inf_hw, hscx.a.io)
+IOFUNC_IND(ISAC, inf_hw, isac.a.io)
+IOFUNC_IND(IPAC, inf_hw, hscx.a.io)
+IOFUNC_MEMIO(ISAC, inf_hw, u32, isac.a.p)
+IOFUNC_MEMIO(IPAC, inf_hw, u32, hscx.a.p)
+
+static irqreturn_t
+diva_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ u8 val;
+
+ spin_lock(&hw->lock);
+ val = inb((u32)hw->cfg.start + DIVA_PCI_CTRL);
+ if (!(val & DIVA_IRQ_BIT)) { /* for us or shared ? */
+ spin_unlock(&hw->lock);
+ return IRQ_NONE; /* shared */
+ }
+ hw->irqcnt++;
+ mISDNipac_irq(&hw->ipac, irqloops);
+ spin_unlock(&hw->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+diva20x_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ u8 val;
+
+ spin_lock(&hw->lock);
+ val = readb(hw->cfg.p);
+ if (!(val & PITA_INT0_STATUS)) { /* for us or shared ? */
+ spin_unlock(&hw->lock);
+ return IRQ_NONE; /* shared */
+ }
+ hw->irqcnt++;
+ mISDNipac_irq(&hw->ipac, irqloops);
+ writeb(PITA_INT0_STATUS, hw->cfg.p); /* ACK PITA INT0 */
+ spin_unlock(&hw->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+tiger_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ u8 val;
+
+ spin_lock(&hw->lock);
+ val = inb((u32)hw->cfg.start + TIGER_AUX_STATUS);
+ if (val & TIGER_IRQ_BIT) { /* for us or shared ? */
+ spin_unlock(&hw->lock);
+ return IRQ_NONE; /* shared */
+ }
+ hw->irqcnt++;
+ mISDNipac_irq(&hw->ipac, irqloops);
+ spin_unlock(&hw->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+elsa_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ u8 val;
+
+ spin_lock(&hw->lock);
+ val = inb((u32)hw->cfg.start + ELSA_IRQ_ADDR);
+ if (!(val & ELSA_IRQ_MASK)) {
+ spin_unlock(&hw->lock);
+ return IRQ_NONE; /* shared */
+ }
+ hw->irqcnt++;
+ mISDNipac_irq(&hw->ipac, irqloops);
+ spin_unlock(&hw->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+niccy_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ u32 val;
+
+ spin_lock(&hw->lock);
+ val = inl((u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
+ if (!(val & NICCY_IRQ_BIT)) { /* for us or shared ? */
+ spin_unlock(&hw->lock);
+ return IRQ_NONE; /* shared */
+ }
+ outl(val, (u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
+ hw->irqcnt++;
+ mISDNipac_irq(&hw->ipac, irqloops);
+ spin_unlock(&hw->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+gazel_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ irqreturn_t ret;
+
+ spin_lock(&hw->lock);
+ ret = mISDNipac_irq(&hw->ipac, irqloops);
+ spin_unlock(&hw->lock);
+ return ret;
+}
+
+static irqreturn_t
+ipac_irq(int intno, void *dev_id)
+{
+ struct inf_hw *hw = dev_id;
+ u8 val;
+
+ spin_lock(&hw->lock);
+ val = hw->ipac.read_reg(hw, IPAC_ISTA);
+ if (!(val & 0x3f)) {
+ spin_unlock(&hw->lock);
+ return IRQ_NONE; /* shared */
+ }
+ hw->irqcnt++;
+ mISDNipac_irq(&hw->ipac, irqloops);
+ spin_unlock(&hw->lock);
+ return IRQ_HANDLED;
+}
+
+static void
+enable_hwirq(struct inf_hw *hw)
+{
+ u16 w;
+ u32 val;
+
+ switch (hw->ci->typ) {
+ case INF_DIVA201:
+ case INF_DIVA202:
+ writel(PITA_INT0_ENABLE, hw->cfg.p);
+ break;
+ case INF_SPEEDWIN:
+ case INF_SAPHIR3:
+ outb(TIGER_IRQ_BIT, (u32)hw->cfg.start + TIGER_AUX_IRQMASK);
+ break;
+ case INF_QS1000:
+ outb(QS1000_IRQ_ON, (u32)hw->cfg.start + ELSA_IRQ_ADDR);
+ break;
+ case INF_QS3000:
+ outb(QS3000_IRQ_ON, (u32)hw->cfg.start + ELSA_IRQ_ADDR);
+ break;
+ case INF_NICCY:
+ val = inl((u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
+ val |= NICCY_IRQ_ENABLE;;
+ outl(val, (u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
+ break;
+ case INF_SCT_1:
+ w = inw((u32)hw->cfg.start + SCT_PLX_IRQ_ADDR);
+ w |= SCT_PLX_IRQ_ENABLE;
+ outw(w, (u32)hw->cfg.start + SCT_PLX_IRQ_ADDR);
+ break;
+ case INF_GAZEL_R685:
+ outb(GAZEL_ISAC_EN + GAZEL_HSCX_EN + GAZEL_PCI_EN,
+ (u32)hw->cfg.start + GAZEL_INCSR);
+ break;
+ case INF_GAZEL_R753:
+ outb(GAZEL_IPAC_EN + GAZEL_PCI_EN,
+ (u32)hw->cfg.start + GAZEL_INCSR);
+ break;
+ default:
+ break;
+ }
+}
+
+static void
+disable_hwirq(struct inf_hw *hw)
+{
+ u16 w;
+ u32 val;
+
+ switch (hw->ci->typ) {
+ case INF_DIVA201:
+ case INF_DIVA202:
+ writel(0, hw->cfg.p);
+ break;
+ case INF_SPEEDWIN:
+ case INF_SAPHIR3:
+ outb(0, (u32)hw->cfg.start + TIGER_AUX_IRQMASK);
+ break;
+ case INF_QS1000:
+ outb(QS1000_IRQ_OFF, (u32)hw->cfg.start + ELSA_IRQ_ADDR);
+ break;
+ case INF_QS3000:
+ outb(QS3000_IRQ_OFF, (u32)hw->cfg.start + ELSA_IRQ_ADDR);
+ break;
+ case INF_NICCY:
+ val = inl((u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
+ val &= NICCY_IRQ_DISABLE;
+ outl(val, (u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
+ break;
+ case INF_SCT_1:
+ w = inw((u32)hw->cfg.start + SCT_PLX_IRQ_ADDR);
+ w &= (~SCT_PLX_IRQ_ENABLE);
+ outw(w, (u32)hw->cfg.start + SCT_PLX_IRQ_ADDR);
+ break;
+ case INF_GAZEL_R685:
+ case INF_GAZEL_R753:
+ outb(0, (u32)hw->cfg.start + GAZEL_INCSR);
+ break;
+ default:
+ break;
+ }
+}
+
+static void
+ipac_chip_reset(struct inf_hw *hw)
+{
+ hw->ipac.write_reg(hw, IPAC_POTA2, 0x20);
+ mdelay(5);
+ hw->ipac.write_reg(hw, IPAC_POTA2, 0x00);
+ mdelay(5);
+ hw->ipac.write_reg(hw, IPAC_CONF, hw->ipac.conf);
+ hw->ipac.write_reg(hw, IPAC_MASK, 0xc0);
+}
+
+static void
+reset_inf(struct inf_hw *hw)
+{
+ u16 w;
+ u32 val;
+
+ if (debug & DEBUG_HW)
+ pr_notice("%s: resetting card\n", hw->name);
+ switch (hw->ci->typ) {
+ case INF_DIVA20:
+ case INF_DIVA20U:
+ outb(0, (u32)hw->cfg.start + DIVA_PCI_CTRL);
+ mdelay(10);
+ outb(DIVA_RESET_BIT, (u32)hw->cfg.start + DIVA_PCI_CTRL);
+ mdelay(10);
+ /* Workaround PCI9060 */
+ outb(9, (u32)hw->cfg.start + 0x69);
+ outb(DIVA_RESET_BIT | DIVA_LED_A,
+ (u32)hw->cfg.start + DIVA_PCI_CTRL);
+ break;
+ case INF_DIVA201:
+ writel(PITA_PARA_SOFTRESET | PITA_PARA_MPX_MODE,
+ hw->cfg.p + PITA_MISC_REG);
+ mdelay(1);
+ writel(PITA_PARA_MPX_MODE, hw->cfg.p + PITA_MISC_REG);
+ mdelay(10);
+ break;
+ case INF_DIVA202:
+ writel(PITA_PARA_SOFTRESET | PITA_PARA_MPX_MODE,
+ hw->cfg.p + PITA_MISC_REG);
+ mdelay(1);
+ writel(PITA_PARA_MPX_MODE | PITA_SER_SOFTRESET,
+ hw->cfg.p + PITA_MISC_REG);
+ mdelay(10);
+ break;
+ case INF_SPEEDWIN:
+ case INF_SAPHIR3:
+ ipac_chip_reset(hw);
+ hw->ipac.write_reg(hw, IPAC_ACFG, 0xff);
+ hw->ipac.write_reg(hw, IPAC_AOE, 0x00);
+ hw->ipac.write_reg(hw, IPAC_PCFG, 0x12);
+ break;
+ case INF_QS1000:
+ case INF_QS3000:
+ ipac_chip_reset(hw);
+ hw->ipac.write_reg(hw, IPAC_ACFG, 0x00);
+ hw->ipac.write_reg(hw, IPAC_AOE, 0x3c);
+ hw->ipac.write_reg(hw, IPAC_ATX, 0xff);
+ break;
+ case INF_NICCY:
+ break;
+ case INF_SCT_1:
+ w = inw((u32)hw->cfg.start + SCT_PLX_RESET_ADDR);
+ w &= (~SCT_PLX_RESET_BIT);
+ outw(w, (u32)hw->cfg.start + SCT_PLX_RESET_ADDR);
+ mdelay(10);
+ w = inw((u32)hw->cfg.start + SCT_PLX_RESET_ADDR);
+ w |= SCT_PLX_RESET_BIT;
+ outw(w, (u32)hw->cfg.start + SCT_PLX_RESET_ADDR);
+ mdelay(10);
+ break;
+ case INF_GAZEL_R685:
+ val = inl((u32)hw->cfg.start + GAZEL_CNTRL);
+ val |= (GAZEL_RESET_9050 + GAZEL_RESET);
+ outl(val, (u32)hw->cfg.start + GAZEL_CNTRL);
+ val &= ~(GAZEL_RESET_9050 + GAZEL_RESET);
+ mdelay(4);
+ outl(val, (u32)hw->cfg.start + GAZEL_CNTRL);
+ mdelay(10);
+ hw->ipac.isac.adf2 = 0x87;
+ hw->ipac.hscx[0].slot = 0x1f;
+ hw->ipac.hscx[0].slot = 0x23;
+ break;
+ case INF_GAZEL_R753:
+ val = inl((u32)hw->cfg.start + GAZEL_CNTRL);
+ val |= (GAZEL_RESET_9050 + GAZEL_RESET);
+ outl(val, (u32)hw->cfg.start + GAZEL_CNTRL);
+ val &= ~(GAZEL_RESET_9050 + GAZEL_RESET);
+ mdelay(4);
+ outl(val, (u32)hw->cfg.start + GAZEL_CNTRL);
+ mdelay(10);
+ ipac_chip_reset(hw);
+ hw->ipac.write_reg(hw, IPAC_ACFG, 0xff);
+ hw->ipac.write_reg(hw, IPAC_AOE, 0x00);
+ hw->ipac.conf = 0x01; /* IOM off */
+ break;
+ default:
+ return;
+ }
+ enable_hwirq(hw);
+}
+
+static int
+inf_ctrl(struct inf_hw *hw, u32 cmd, u_long arg)
+{
+ int ret = 0;
+
+ switch (cmd) {
+ case HW_RESET_REQ:
+ reset_inf(hw);
+ break;
+ default:
+ pr_info("%s: %s unknown command %x %lx\n",
+ hw->name, __func__, cmd, arg);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int __devinit
+init_irq(struct inf_hw *hw)
+{
+ int ret, cnt = 3;
+ u_long flags;
+
+ if (!hw->ci->irqfunc)
+ return -EINVAL;
+ ret = request_irq(hw->irq, hw->ci->irqfunc, IRQF_SHARED, hw->name, hw);
+ if (ret) {
+ pr_info("%s: couldn't get interrupt %d\n", hw->name, hw->irq);
+ return ret;
+ }
+ while (cnt--) {
+ spin_lock_irqsave(&hw->lock, flags);
+ reset_inf(hw);
+ ret = hw->ipac.init(&hw->ipac);
+ if (ret) {
+ spin_unlock_irqrestore(&hw->lock, flags);
+ pr_info("%s: ISAC init failed with %d\n",
+ hw->name, ret);
+ break;
+ }
+ spin_unlock_irqrestore(&hw->lock, flags);
+ msleep_interruptible(10);
+ if (debug & DEBUG_HW)
+ pr_notice("%s: IRQ %d count %d\n", hw->name,
+ hw->irq, hw->irqcnt);
+ if (!hw->irqcnt) {
+ pr_info("%s: IRQ(%d) got no requests during init %d\n",
+ hw->name, hw->irq, 3 - cnt);
+ } else
+ return 0;
+ }
+ free_irq(hw->irq, hw);
+ return -EIO;
+}
+
+static void
+release_io(struct inf_hw *hw)
+{
+ if (hw->cfg.mode) {
+ if (hw->cfg.p) {
+ release_mem_region(hw->cfg.start, hw->cfg.size);
+ iounmap(hw->cfg.p);
+ } else
+ release_region(hw->cfg.start, hw->cfg.size);
+ hw->cfg.mode = AM_NONE;
+ }
+ if (hw->addr.mode) {
+ if (hw->addr.p) {
+ release_mem_region(hw->addr.start, hw->addr.size);
+ iounmap(hw->addr.p);
+ } else
+ release_region(hw->addr.start, hw->addr.size);
+ hw->addr.mode = AM_NONE;
+ }
+}
+
+static int __devinit
+setup_io(struct inf_hw *hw)
+{
+ int err = 0;
+
+ if (hw->ci->cfg_mode) {
+ hw->cfg.start = pci_resource_start(hw->pdev, hw->ci->cfg_bar);
+ hw->cfg.size = pci_resource_len(hw->pdev, hw->ci->cfg_bar);
+ if (hw->ci->cfg_mode == AM_MEMIO) {
+ if (!request_mem_region(hw->cfg.start, hw->cfg.size,
+ hw->name))
+ err = -EBUSY;
+ } else {
+ if (!request_region(hw->cfg.start, hw->cfg.size,
+ hw->name))
+ err = -EBUSY;
+ }
+ if (err) {
+ pr_info("mISDN: %s config port %lx (%lu bytes)"
+ "already in use\n", hw->name,
+ (ulong)hw->cfg.start, (ulong)hw->cfg.size);
+ return err;
+ }
+ if (hw->ci->cfg_mode == AM_MEMIO)
+ hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
+ hw->cfg.mode = hw->ci->cfg_mode;
+ if (debug & DEBUG_HW)
+ pr_notice("%s: IO cfg %lx (%lu bytes) mode%d\n",
+ hw->name, (ulong)hw->cfg.start,
+ (ulong)hw->cfg.size, hw->ci->cfg_mode);
+
+ }
+ if (hw->ci->addr_mode) {
+ hw->addr.start = pci_resource_start(hw->pdev, hw->ci->addr_bar);
+ hw->addr.size = pci_resource_len(hw->pdev, hw->ci->addr_bar);
+ if (hw->ci->addr_mode == AM_MEMIO) {
+ if (!request_mem_region(hw->addr.start, hw->addr.size,
+ hw->name))
+ err = -EBUSY;
+ } else {
+ if (!request_region(hw->addr.start, hw->addr.size,
+ hw->name))
+ err = -EBUSY;
+ }
+ if (err) {
+ pr_info("mISDN: %s address port %lx (%lu bytes)"
+ "already in use\n", hw->name,
+ (ulong)hw->addr.start, (ulong)hw->addr.size);
+ return err;
+ }
+ if (hw->ci->addr_mode == AM_MEMIO)
+ hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
+ hw->addr.mode = hw->ci->addr_mode;
+ if (debug & DEBUG_HW)
+ pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n",
+ hw->name, (ulong)hw->addr.start,
+ (ulong)hw->addr.size, hw->ci->addr_mode);
+
+ }
+
+ switch (hw->ci->typ) {
+ case INF_DIVA20:
+ case INF_DIVA20U:
+ hw->ipac.type = IPAC_TYPE_ISAC | IPAC_TYPE_HSCX;
+ hw->isac.mode = hw->cfg.mode;
+ hw->isac.a.io.ale = (u32)hw->cfg.start + DIVA_ISAC_ALE;
+ hw->isac.a.io.port = (u32)hw->cfg.start + DIVA_ISAC_PORT;
+ hw->hscx.mode = hw->cfg.mode;
+ hw->hscx.a.io.ale = (u32)hw->cfg.start + DIVA_HSCX_ALE;
+ hw->hscx.a.io.port = (u32)hw->cfg.start + DIVA_HSCX_PORT;
+ break;
+ case INF_DIVA201:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.mode = hw->addr.mode;
+ hw->isac.a.p = hw->addr.p;
+ hw->hscx.mode = hw->addr.mode;
+ hw->hscx.a.p = hw->addr.p;
+ break;
+ case INF_DIVA202:
+ hw->ipac.type = IPAC_TYPE_IPACX;
+ hw->isac.mode = hw->addr.mode;
+ hw->isac.a.p = hw->addr.p;
+ hw->hscx.mode = hw->addr.mode;
+ hw->hscx.a.p = hw->addr.p;
+ break;
+ case INF_SPEEDWIN:
+ case INF_SAPHIR3:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.mode = hw->cfg.mode;
+ hw->isac.a.io.ale = (u32)hw->cfg.start + TIGER_IPAC_ALE;
+ hw->isac.a.io.port = (u32)hw->cfg.start + TIGER_IPAC_PORT;
+ hw->hscx.mode = hw->cfg.mode;
+ hw->hscx.a.io.ale = (u32)hw->cfg.start + TIGER_IPAC_ALE;
+ hw->hscx.a.io.port = (u32)hw->cfg.start + TIGER_IPAC_PORT;
+ outb(0xff, (ulong)hw->cfg.start);
+ mdelay(1);
+ outb(0x00, (ulong)hw->cfg.start);
+ mdelay(1);
+ outb(TIGER_IOMASK, (ulong)hw->cfg.start + TIGER_AUX_CTRL);
+ break;
+ case INF_QS1000:
+ case INF_QS3000:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.a.io.ale = (u32)hw->addr.start;
+ hw->isac.a.io.port = (u32)hw->addr.start + 1;
+ hw->isac.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = (u32)hw->addr.start;
+ hw->hscx.a.io.port = (u32)hw->addr.start + 1;
+ hw->hscx.mode = hw->addr.mode;
+ break;
+ case INF_NICCY:
+ hw->ipac.type = IPAC_TYPE_ISAC | IPAC_TYPE_HSCX;
+ hw->isac.mode = hw->addr.mode;
+ hw->isac.a.io.ale = (u32)hw->addr.start + NICCY_ISAC_ALE;
+ hw->isac.a.io.port = (u32)hw->addr.start + NICCY_ISAC_PORT;
+ hw->hscx.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = (u32)hw->addr.start + NICCY_HSCX_ALE;
+ hw->hscx.a.io.port = (u32)hw->addr.start + NICCY_HSCX_PORT;
+ break;
+ case INF_SCT_1:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.a.io.ale = (u32)hw->addr.start;
+ hw->isac.a.io.port = hw->isac.a.io.ale + 4;
+ hw->isac.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = hw->isac.a.io.ale;
+ hw->hscx.a.io.port = hw->isac.a.io.port;
+ hw->hscx.mode = hw->addr.mode;
+ break;
+ case INF_SCT_2:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.a.io.ale = (u32)hw->addr.start + 0x08;
+ hw->isac.a.io.port = hw->isac.a.io.ale + 4;
+ hw->isac.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = hw->isac.a.io.ale;
+ hw->hscx.a.io.port = hw->isac.a.io.port;
+ hw->hscx.mode = hw->addr.mode;
+ break;
+ case INF_SCT_3:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.a.io.ale = (u32)hw->addr.start + 0x10;
+ hw->isac.a.io.port = hw->isac.a.io.ale + 4;
+ hw->isac.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = hw->isac.a.io.ale;
+ hw->hscx.a.io.port = hw->isac.a.io.port;
+ hw->hscx.mode = hw->addr.mode;
+ break;
+ case INF_SCT_4:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.a.io.ale = (u32)hw->addr.start + 0x20;
+ hw->isac.a.io.port = hw->isac.a.io.ale + 4;
+ hw->isac.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = hw->isac.a.io.ale;
+ hw->hscx.a.io.port = hw->isac.a.io.port;
+ hw->hscx.mode = hw->addr.mode;
+ break;
+ case INF_GAZEL_R685:
+ hw->ipac.type = IPAC_TYPE_ISAC | IPAC_TYPE_HSCX;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.mode = hw->addr.mode;
+ hw->isac.a.io.port = (u32)hw->addr.start;
+ hw->hscx.mode = hw->addr.mode;
+ hw->hscx.a.io.port = hw->isac.a.io.port;
+ break;
+ case INF_GAZEL_R753:
+ hw->ipac.type = IPAC_TYPE_IPAC;
+ hw->ipac.isac.off = 0x80;
+ hw->isac.mode = hw->addr.mode;
+ hw->isac.a.io.ale = (u32)hw->addr.start;
+ hw->isac.a.io.port = (u32)hw->addr.start + GAZEL_IPAC_DATA_PORT;
+ hw->hscx.mode = hw->addr.mode;
+ hw->hscx.a.io.ale = hw->isac.a.io.ale;
+ hw->hscx.a.io.port = hw->isac.a.io.port;
+ break;
+ default:
+ return -EINVAL;
+ }
+ switch (hw->isac.mode) {
+ case AM_MEMIO:
+ ASSIGN_FUNC_IPAC(MIO, hw->ipac);
+ break;
+ case AM_IND_IO:
+ ASSIGN_FUNC_IPAC(IND, hw->ipac);
+ break;
+ case AM_IO:
+ ASSIGN_FUNC_IPAC(IO, hw->ipac);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void
+release_card(struct inf_hw *card) {
+ ulong flags;
+ int i;
+
+ spin_lock_irqsave(&card->lock, flags);
+ disable_hwirq(card);
+ spin_unlock_irqrestore(&card->lock, flags);
+ card->ipac.isac.release(&card->ipac.isac);
+ free_irq(card->irq, card);
+ mISDN_unregister_device(&card->ipac.isac.dch.dev);
+ release_io(card);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ switch (card->ci->typ) {
+ case INF_SCT_2:
+ case INF_SCT_3:
+ case INF_SCT_4:
+ break;
+ case INF_SCT_1:
+ for (i = 0; i < 3; i++) {
+ if (card->sc[i])
+ release_card(card->sc[i]);
+ card->sc[i] = NULL;
+ }
+ default:
+ pci_disable_device(card->pdev);
+ pci_set_drvdata(card->pdev, NULL);
+ break;
+ }
+ kfree(card);
+ inf_cnt--;
+}
+
+static int __devinit
+setup_instance(struct inf_hw *card)
+{
+ int err;
+ ulong flags;
+
+ snprintf(card->name, MISDN_MAX_IDLEN - 1, "%s.%d", card->ci->name,
+ inf_cnt + 1);
+ write_lock_irqsave(&card_lock, flags);
+ list_add_tail(&card->list, &Cards);
+ write_unlock_irqrestore(&card_lock, flags);
+
+ _set_debug(card);
+ card->ipac.isac.name = card->name;
+ card->ipac.name = card->name;
+ card->ipac.owner = THIS_MODULE;
+ spin_lock_init(&card->lock);
+ card->ipac.isac.hwlock = &card->lock;
+ card->ipac.hwlock = &card->lock;
+ card->ipac.ctrl = (void *)&inf_ctrl;
+
+ err = setup_io(card);
+ if (err)
+ goto error_setup;
+
+ card->ipac.isac.dch.dev.Bprotocols =
+ mISDNipac_init(&card->ipac, card);
+
+ if (card->ipac.isac.dch.dev.Bprotocols == 0)
+ goto error_setup;;
+
+ err = mISDN_register_device(&card->ipac.isac.dch.dev,
+ &card->pdev->dev, card->name);
+ if (err)
+ goto error;
+
+ err = init_irq(card);
+ if (!err) {
+ inf_cnt++;
+ pr_notice("Infineon %d cards installed\n", inf_cnt);
+ return 0;
+ }
+ mISDN_unregister_device(&card->ipac.isac.dch.dev);
+error:
+ card->ipac.release(&card->ipac);
+error_setup:
+ release_io(card);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ return err;
+}
+
+static const struct inf_cinfo inf_card_info[] = {
+ {
+ INF_DIVA20,
+ "Dialogic Diva 2.0",
+ "diva20",
+ AM_IND_IO, AM_NONE, 2, 0,
+ &diva_irq
+ },
+ {
+ INF_DIVA20U,
+ "Dialogic Diva 2.0U",
+ "diva20U",
+ AM_IND_IO, AM_NONE, 2, 0,
+ &diva_irq
+ },
+ {
+ INF_DIVA201,
+ "Dialogic Diva 2.01",
+ "diva201",
+ AM_MEMIO, AM_MEMIO, 0, 1,
+ &diva20x_irq
+ },
+ {
+ INF_DIVA202,
+ "Dialogic Diva 2.02",
+ "diva202",
+ AM_MEMIO, AM_MEMIO, 0, 1,
+ &diva20x_irq
+ },
+ {
+ INF_SPEEDWIN,
+ "Sedlbauer SpeedWin PCI",
+ "speedwin",
+ AM_IND_IO, AM_NONE, 0, 0,
+ &tiger_irq
+ },
+ {
+ INF_SAPHIR3,
+ "HST Saphir 3",
+ "saphir",
+ AM_IND_IO, AM_NONE, 0, 0,
+ &tiger_irq
+ },
+ {
+ INF_QS1000,
+ "Develo Microlink PCI",
+ "qs1000",
+ AM_IO, AM_IND_IO, 1, 3,
+ &elsa_irq
+ },
+ {
+ INF_QS3000,
+ "Develo QuickStep 3000",
+ "qs3000",
+ AM_IO, AM_IND_IO, 1, 3,
+ &elsa_irq
+ },
+ {
+ INF_NICCY,
+ "Sagem NICCY",
+ "niccy",
+ AM_IO, AM_IND_IO, 0, 1,
+ &niccy_irq
+ },
+ {
+ INF_SCT_1,
+ "SciTel Quadro",
+ "p1_scitel",
+ AM_IO, AM_IND_IO, 1, 5,
+ &ipac_irq
+ },
+ {
+ INF_SCT_2,
+ "SciTel Quadro",
+ "p2_scitel",
+ AM_NONE, AM_IND_IO, 0, 4,
+ &ipac_irq
+ },
+ {
+ INF_SCT_3,
+ "SciTel Quadro",
+ "p3_scitel",
+ AM_NONE, AM_IND_IO, 0, 3,
+ &ipac_irq
+ },
+ {
+ INF_SCT_4,
+ "SciTel Quadro",
+ "p4_scitel",
+ AM_NONE, AM_IND_IO, 0, 2,
+ &ipac_irq
+ },
+ {
+ INF_GAZEL_R685,
+ "Gazel R685",
+ "gazel685",
+ AM_IO, AM_IO, 1, 2,
+ &gazel_irq
+ },
+ {
+ INF_GAZEL_R753,
+ "Gazel R753",
+ "gazel753",
+ AM_IO, AM_IND_IO, 1, 2,
+ &ipac_irq
+ },
+ {
+ INF_NONE,
+ }
+};
+
+static const struct inf_cinfo * __devinit
+get_card_info(enum inf_types typ)
+{
+ const struct inf_cinfo *ci = inf_card_info;
+
+ while (ci->typ != INF_NONE) {
+ if (ci->typ == typ)
+ return ci;
+ ci++;
+ }
+ return NULL;
+}
+
+static int __devinit
+inf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = -ENOMEM;
+ struct inf_hw *card;
+
+ card = kzalloc(sizeof(struct inf_hw), GFP_KERNEL);
+ if (!card) {
+ pr_info("No memory for Infineon ISDN card\n");
+ return err;
+ }
+ card->pdev = pdev;
+ err = pci_enable_device(pdev);
+ if (err) {
+ kfree(card);
+ return err;
+ }
+ card->ci = get_card_info(ent->driver_data);
+ if (!card->ci) {
+ pr_info("mISDN: do not have informations about adapter at %s\n",
+ pci_name(pdev));
+ kfree(card);
+ return -EINVAL;
+ } else
+ pr_notice("mISDN: found adapter %s at %s\n",
+ card->ci->full, pci_name(pdev));
+
+ card->irq = pdev->irq;
+ pci_set_drvdata(pdev, card);
+ err = setup_instance(card);
+ if (err) {
+ pci_disable_device(card->pdev);
+ kfree(card);
+ pci_set_drvdata(pdev, NULL);
+ } else if (ent->driver_data == INF_SCT_1) {
+ int i;
+ struct inf_hw *sc;
+
+ for (i = 1; i < 4; i++) {
+ sc = kzalloc(sizeof(struct inf_hw), GFP_KERNEL);
+ if (!sc) {
+ release_card(card);
+ return -ENOMEM;
+ }
+ sc->irq = card->irq;
+ sc->pdev = card->pdev;
+ sc->ci = card->ci + i;
+ err = setup_instance(sc);
+ if (err) {
+ kfree(sc);
+ release_card(card);
+ } else
+ card->sc[i - 1] = sc;
+ }
+ }
+ return err;
+}
+
+static void __devexit
+inf_remove(struct pci_dev *pdev)
+{
+ struct inf_hw *card = pci_get_drvdata(pdev);
+
+ if (card)
+ release_card(card);
+ else
+ pr_debug("%s: drvdata allready removed\n", __func__);
+}
+
+static struct pci_driver infineon_driver = {
+ .name = "ISDN Infineon pci",
+ .probe = inf_probe,
+ .remove = __devexit_p(inf_remove),
+ .id_table = infineon_ids,
+};
+
+static int __init
+infineon_init(void)
+{
+ int err;
+
+ pr_notice("Infineon ISDN Driver Rev. %s\n", INFINEON_REV);
+ err = pci_register_driver(&infineon_driver);
+ return err;
+}
+
+static void __exit
+infineon_cleanup(void)
+{
+ pci_unregister_driver(&infineon_driver);
+}
+
+module_init(infineon_init);
+module_exit(infineon_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
new file mode 100644
index 0000000..613ba04
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -0,0 +1,1655 @@
+/*
+ * isac.c ISAC specific routines
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/mISDNhw.h>
+#include "ipac.h"
+
+
+#define DBUSY_TIMER_VALUE 80
+#define ARCOFI_USE 1
+
+#define ISAC_REV "2.0"
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_VERSION(ISAC_REV);
+MODULE_LICENSE("GPL v2");
+
+#define ReadISAC(is, o) (is->read_reg(is->dch.hw, o + is->off))
+#define WriteISAC(is, o, v) (is->write_reg(is->dch.hw, o + is->off, v))
+#define ReadHSCX(h, o) (h->ip->read_reg(h->ip->hw, h->off + o))
+#define WriteHSCX(h, o, v) (h->ip->write_reg(h->ip->hw, h->off + o, v))
+#define ReadIPAC(ip, o) (ip->read_reg(ip->hw, o))
+#define WriteIPAC(ip, o, v) (ip->write_reg(ip->hw, o, v))
+
+static inline void
+ph_command(struct isac_hw *isac, u8 command)
+{
+ pr_debug("%s: ph_command %x\n", isac->name, command);
+ if (isac->type & IPAC_TYPE_ISACX)
+ WriteISAC(isac, ISACX_CIX0, (command << 4) | 0xE);
+ else
+ WriteISAC(isac, ISAC_CIX0, (command << 2) | 3);
+}
+
+static void
+isac_ph_state_change(struct isac_hw *isac)
+{
+ switch (isac->state) {
+ case (ISAC_IND_RS):
+ case (ISAC_IND_EI):
+ ph_command(isac, ISAC_CMD_DUI);
+ }
+ schedule_event(&isac->dch, FLG_PHCHANGE);
+}
+
+static void
+isac_ph_state_bh(struct dchannel *dch)
+{
+ struct isac_hw *isac = container_of(dch, struct isac_hw, dch);
+
+ switch (isac->state) {
+ case ISAC_IND_RS:
+ case ISAC_IND_EI:
+ dch->state = 0;
+ l1_event(dch->l1, HW_RESET_IND);
+ break;
+ case ISAC_IND_DID:
+ dch->state = 3;
+ l1_event(dch->l1, HW_DEACT_CNF);
+ break;
+ case ISAC_IND_DR:
+ dch->state = 3;
+ l1_event(dch->l1, HW_DEACT_IND);
+ break;
+ case ISAC_IND_PU:
+ dch->state = 4;
+ l1_event(dch->l1, HW_POWERUP_IND);
+ break;
+ case ISAC_IND_RSY:
+ if (dch->state <= 5) {
+ dch->state = 5;
+ l1_event(dch->l1, ANYSIGNAL);
+ } else {
+ dch->state = 8;
+ l1_event(dch->l1, LOSTFRAMING);
+ }
+ break;
+ case ISAC_IND_ARD:
+ dch->state = 6;
+ l1_event(dch->l1, INFO2);
+ break;
+ case ISAC_IND_AI8:
+ dch->state = 7;
+ l1_event(dch->l1, INFO4_P8);
+ break;
+ case ISAC_IND_AI10:
+ dch->state = 7;
+ l1_event(dch->l1, INFO4_P10);
+ break;
+ }
+ pr_debug("%s: TE newstate %x\n", isac->name, dch->state);
+}
+
+void
+isac_empty_fifo(struct isac_hw *isac, int count)
+{
+ u8 *ptr;
+
+ pr_debug("%s: %s %d\n", isac->name, __func__, count);
+
+ if (!isac->dch.rx_skb) {
+ isac->dch.rx_skb = mI_alloc_skb(isac->dch.maxlen, GFP_ATOMIC);
+ if (!isac->dch.rx_skb) {
+ pr_info("%s: D receive out of memory\n", isac->name);
+ WriteISAC(isac, ISAC_CMDR, 0x80);
+ return;
+ }
+ }
+ if ((isac->dch.rx_skb->len + count) >= isac->dch.maxlen) {
+ pr_debug("%s: %s overrun %d\n", isac->name, __func__,
+ isac->dch.rx_skb->len + count);
+ WriteISAC(isac, ISAC_CMDR, 0x80);
+ return;
+ }
+ ptr = skb_put(isac->dch.rx_skb, count);
+ isac->read_fifo(isac->dch.hw, isac->off, ptr, count);
+ WriteISAC(isac, ISAC_CMDR, 0x80);
+ if (isac->dch.debug & DEBUG_HW_DFIFO) {
+ char pfx[MISDN_MAX_IDLEN + 16];
+
+ snprintf(pfx, MISDN_MAX_IDLEN + 15, "D-recv %s %d ",
+ isac->name, count);
+ print_hex_dump_bytes(pfx, DUMP_PREFIX_OFFSET, ptr, count);
+ }
+}
+
+static void
+isac_fill_fifo(struct isac_hw *isac)
+{
+ int count, more;
+ u8 *ptr;
+
+ if (!isac->dch.tx_skb)
+ return;
+ count = isac->dch.tx_skb->len - isac->dch.tx_idx;
+ if (count <= 0)
+ return;
+
+ more = 0;
+ if (count > 32) {
+ more = !0;
+ count = 32;
+ }
+ pr_debug("%s: %s %d\n", isac->name, __func__, count);
+ ptr = isac->dch.tx_skb->data + isac->dch.tx_idx;
+ isac->dch.tx_idx += count;
+ isac->write_fifo(isac->dch.hw, isac->off, ptr, count);
+ WriteISAC(isac, ISAC_CMDR, more ? 0x8 : 0xa);
+ if (test_and_set_bit(FLG_BUSY_TIMER, &isac->dch.Flags)) {
+ pr_debug("%s: %s dbusytimer running\n", isac->name, __func__);
+ del_timer(&isac->dch.timer);
+ }
+ init_timer(&isac->dch.timer);
+ isac->dch.timer.expires = jiffies + ((DBUSY_TIMER_VALUE * HZ)/1000);
+ add_timer(&isac->dch.timer);
+ if (isac->dch.debug & DEBUG_HW_DFIFO) {
+ char pfx[MISDN_MAX_IDLEN + 16];
+
+ snprintf(pfx, MISDN_MAX_IDLEN + 15, "D-send %s %d ",
+ isac->name, count);
+ print_hex_dump_bytes(pfx, DUMP_PREFIX_OFFSET, ptr, count);
+ }
+}
+
+static void
+isac_rme_irq(struct isac_hw *isac)
+{
+ u8 val, count;
+
+ val = ReadISAC(isac, ISAC_RSTA);
+ if ((val & 0x70) != 0x20) {
+ if (val & 0x40) {
+ pr_debug("%s: ISAC RDO\n", isac->name);
+#ifdef ERROR_STATISTIC
+ isac->dch.err_rx++;
+#endif
+ }
+ if (!(val & 0x20)) {
+ pr_debug("%s: ISAC CRC error\n", isac->name);
+#ifdef ERROR_STATISTIC
+ isac->dch.err_crc++;
+#endif
+ }
+ WriteISAC(isac, ISAC_CMDR, 0x80);
+ if (isac->dch.rx_skb)
+ dev_kfree_skb(isac->dch.rx_skb);
+ isac->dch.rx_skb = NULL;
+ } else {
+ count = ReadISAC(isac, ISAC_RBCL) & 0x1f;
+ if (count == 0)
+ count = 32;
+ isac_empty_fifo(isac, count);
+ recv_Dchannel(&isac->dch);
+ }
+}
+
+static void
+isac_xpr_irq(struct isac_hw *isac)
+{
+ if (test_and_clear_bit(FLG_BUSY_TIMER, &isac->dch.Flags))
+ del_timer(&isac->dch.timer);
+ if (isac->dch.tx_skb && isac->dch.tx_idx < isac->dch.tx_skb->len) {
+ isac_fill_fifo(isac);
+ } else {
+ if (isac->dch.tx_skb)
+ dev_kfree_skb(isac->dch.tx_skb);
+ if (get_next_dframe(&isac->dch))
+ isac_fill_fifo(isac);
+ }
+}
+
+static void
+isac_retransmit(struct isac_hw *isac)
+{
+ if (test_and_clear_bit(FLG_BUSY_TIMER, &isac->dch.Flags))
+ del_timer(&isac->dch.timer);
+ if (test_bit(FLG_TX_BUSY, &isac->dch.Flags)) {
+ /* Restart frame */
+ isac->dch.tx_idx = 0;
+ isac_fill_fifo(isac);
+ } else if (isac->dch.tx_skb) { /* should not happen */
+ pr_info("%s: tx_skb exist but not busy\n", isac->name);
+ test_and_set_bit(FLG_TX_BUSY, &isac->dch.Flags);
+ isac->dch.tx_idx = 0;
+ isac_fill_fifo(isac);
+ } else {
+ pr_info("%s: ISAC XDU no TX_BUSY\n", isac->name);
+ if (get_next_dframe(&isac->dch))
+ isac_fill_fifo(isac);
+ }
+}
+
+static void
+isac_mos_irq(struct isac_hw *isac)
+{
+ u8 val;
+ int ret;
+
+ val = ReadISAC(isac, ISAC_MOSR);
+ pr_debug("%s: ISAC MOSR %02x\n", isac->name, val);
+#if ARCOFI_USE
+ if (val & 0x08) {
+ if (!isac->mon_rx) {
+ isac->mon_rx = kmalloc(MAX_MON_FRAME, GFP_ATOMIC);
+ if (!isac->mon_rx) {
+ pr_info("%s: ISAC MON RX out of memory!\n",
+ isac->name);
+ isac->mocr &= 0xf0;
+ isac->mocr |= 0x0a;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ goto afterMONR0;
+ } else
+ isac->mon_rxp = 0;
+ }
+ if (isac->mon_rxp >= MAX_MON_FRAME) {
+ isac->mocr &= 0xf0;
+ isac->mocr |= 0x0a;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ isac->mon_rxp = 0;
+ pr_debug("%s: ISAC MON RX overflow!\n", isac->name);
+ goto afterMONR0;
+ }
+ isac->mon_rx[isac->mon_rxp++] = ReadISAC(isac, ISAC_MOR0);
+ pr_debug("%s: ISAC MOR0 %02x\n", isac->name,
+ isac->mon_rx[isac->mon_rxp - 1]);
+ if (isac->mon_rxp == 1) {
+ isac->mocr |= 0x04;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ }
+ }
+afterMONR0:
+ if (val & 0x80) {
+ if (!isac->mon_rx) {
+ isac->mon_rx = kmalloc(MAX_MON_FRAME, GFP_ATOMIC);
+ if (!isac->mon_rx) {
+ pr_info("%s: ISAC MON RX out of memory!\n",
+ isac->name);
+ isac->mocr &= 0x0f;
+ isac->mocr |= 0xa0;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ goto afterMONR1;
+ } else
+ isac->mon_rxp = 0;
+ }
+ if (isac->mon_rxp >= MAX_MON_FRAME) {
+ isac->mocr &= 0x0f;
+ isac->mocr |= 0xa0;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ isac->mon_rxp = 0;
+ pr_debug("%s: ISAC MON RX overflow!\n", isac->name);
+ goto afterMONR1;
+ }
+ isac->mon_rx[isac->mon_rxp++] = ReadISAC(isac, ISAC_MOR1);
+ pr_debug("%s: ISAC MOR1 %02x\n", isac->name,
+ isac->mon_rx[isac->mon_rxp - 1]);
+ isac->mocr |= 0x40;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ }
+afterMONR1:
+ if (val & 0x04) {
+ isac->mocr &= 0xf0;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ isac->mocr |= 0x0a;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ if (isac->monitor) {
+ ret = isac->monitor(isac->dch.hw, MONITOR_RX_0,
+ isac->mon_rx, isac->mon_rxp);
+ if (ret)
+ kfree(isac->mon_rx);
+ } else {
+ pr_info("%s: MONITOR 0 received %d but no user\n",
+ isac->name, isac->mon_rxp);
+ kfree(isac->mon_rx);
+ }
+ isac->mon_rx = NULL;
+ isac->mon_rxp = 0;
+ }
+ if (val & 0x40) {
+ isac->mocr &= 0x0f;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ isac->mocr |= 0xa0;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ if (isac->monitor) {
+ ret = isac->monitor(isac->dch.hw, MONITOR_RX_1,
+ isac->mon_rx, isac->mon_rxp);
+ if (ret)
+ kfree(isac->mon_rx);
+ } else {
+ pr_info("%s: MONITOR 1 received %d but no user\n",
+ isac->name, isac->mon_rxp);
+ kfree(isac->mon_rx);
+ }
+ isac->mon_rx = NULL;
+ isac->mon_rxp = 0;
+ }
+ if (val & 0x02) {
+ if ((!isac->mon_tx) || (isac->mon_txc &&
+ (isac->mon_txp >= isac->mon_txc) && !(val & 0x08))) {
+ isac->mocr &= 0xf0;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ isac->mocr |= 0x0a;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ if (isac->mon_txc && (isac->mon_txp >= isac->mon_txc)) {
+ if (isac->monitor)
+ ret = isac->monitor(isac->dch.hw,
+ MONITOR_TX_0, NULL, 0);
+ }
+ kfree(isac->mon_tx);
+ isac->mon_tx = NULL;
+ isac->mon_txc = 0;
+ isac->mon_txp = 0;
+ goto AfterMOX0;
+ }
+ if (isac->mon_txc && (isac->mon_txp >= isac->mon_txc)) {
+ if (isac->monitor)
+ ret = isac->monitor(isac->dch.hw,
+ MONITOR_TX_0, NULL, 0);
+ kfree(isac->mon_tx);
+ isac->mon_tx = NULL;
+ isac->mon_txc = 0;
+ isac->mon_txp = 0;
+ goto AfterMOX0;
+ }
+ WriteISAC(isac, ISAC_MOX0, isac->mon_tx[isac->mon_txp++]);
+ pr_debug("%s: ISAC %02x -> MOX0\n", isac->name,
+ isac->mon_tx[isac->mon_txp - 1]);
+ }
+AfterMOX0:
+ if (val & 0x20) {
+ if ((!isac->mon_tx) || (isac->mon_txc &&
+ (isac->mon_txp >= isac->mon_txc) && !(val & 0x80))) {
+ isac->mocr &= 0x0f;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ isac->mocr |= 0xa0;
+ WriteISAC(isac, ISAC_MOCR, isac->mocr);
+ if (isac->mon_txc && (isac->mon_txp >= isac->mon_txc)) {
+ if (isac->monitor)
+ ret = isac->monitor(isac->dch.hw,
+ MONITOR_TX_1, NULL, 0);
+ }
+ kfree(isac->mon_tx);
+ isac->mon_tx = NULL;
+ isac->mon_txc = 0;
+ isac->mon_txp = 0;
+ goto AfterMOX1;
+ }
+ if (isac->mon_txc && (isac->mon_txp >= isac->mon_txc)) {
+ if (isac->monitor)
+ ret = isac->monitor(isac->dch.hw,
+ MONITOR_TX_1, NULL, 0);
+ kfree(isac->mon_tx);
+ isac->mon_tx = NULL;
+ isac->mon_txc = 0;
+ isac->mon_txp = 0;
+ goto AfterMOX1;
+ }
+ WriteISAC(isac, ISAC_MOX1, isac->mon_tx[isac->mon_txp++]);
+ pr_debug("%s: ISAC %02x -> MOX1\n", isac->name,
+ isac->mon_tx[isac->mon_txp - 1]);
+ }
+AfterMOX1:
+ val = 0; /* dummy to avoid warning */
+#endif
+}
+
+static void
+isac_cisq_irq(struct isac_hw *isac) {
+ u8 val;
+
+ val = ReadISAC(isac, ISAC_CIR0);
+ pr_debug("%s: ISAC CIR0 %02X\n", isac->name, val);
+ if (val & 2) {
+ pr_debug("%s: ph_state change %x->%x\n", isac->name,
+ isac->state, (val >> 2) & 0xf);
+ isac->state = (val >> 2) & 0xf;
+ isac_ph_state_change(isac);
+ }
+ if (val & 1) {
+ val = ReadISAC(isac, ISAC_CIR1);
+ pr_debug("%s: ISAC CIR1 %02X\n", isac->name, val);
+ }
+}
+
+static void
+isacsx_cic_irq(struct isac_hw *isac)
+{
+ u8 val;
+
+ val = ReadISAC(isac, ISACX_CIR0);
+ pr_debug("%s: ISACX CIR0 %02X\n", isac->name, val);
+ if (val & ISACX_CIR0_CIC0) {
+ pr_debug("%s: ph_state change %x->%x\n", isac->name,
+ isac->state, val >> 4);
+ isac->state = val >> 4;
+ isac_ph_state_change(isac);
+ }
+}
+
+static void
+isacsx_rme_irq(struct isac_hw *isac)
+{
+ int count;
+ u8 val;
+
+ val = ReadISAC(isac, ISACX_RSTAD);
+ if ((val & (ISACX_RSTAD_VFR |
+ ISACX_RSTAD_RDO |
+ ISACX_RSTAD_CRC |
+ ISACX_RSTAD_RAB))
+ != (ISACX_RSTAD_VFR | ISACX_RSTAD_CRC)) {
+ pr_debug("%s: RSTAD %#x, dropped\n", isac->name, val);
+#ifdef ERROR_STATISTIC
+ if (val & ISACX_RSTAD_CRC)
+ isac->dch.err_rx++;
+ else
+ isac->dch.err_crc++;
+#endif
+ WriteISAC(isac, ISACX_CMDRD, ISACX_CMDRD_RMC);
+ if (isac->dch.rx_skb)
+ dev_kfree_skb(isac->dch.rx_skb);
+ isac->dch.rx_skb = NULL;
+ } else {
+ count = ReadISAC(isac, ISACX_RBCLD) & 0x1f;
+ if (count == 0)
+ count = 32;
+ isac_empty_fifo(isac, count);
+ if (isac->dch.rx_skb) {
+ skb_trim(isac->dch.rx_skb, isac->dch.rx_skb->len - 1);
+ pr_debug("%s: dchannel received %d\n", isac->name,
+ isac->dch.rx_skb->len);
+ recv_Dchannel(&isac->dch);
+ }
+ }
+}
+
+irqreturn_t
+mISDNisac_irq(struct isac_hw *isac, u8 val)
+{
+ if (unlikely(!val))
+ return IRQ_NONE;
+ pr_debug("%s: ISAC interrupt %02x\n", isac->name, val);
+ if (isac->type & IPAC_TYPE_ISACX) {
+ if (val & ISACX__CIC)
+ isacsx_cic_irq(isac);
+ if (val & ISACX__ICD) {
+ val = ReadISAC(isac, ISACX_ISTAD);
+ pr_debug("%s: ISTAD %02x\n", isac->name, val);
+ if (val & ISACX_D_XDU) {
+ pr_debug("%s: ISAC XDU\n", isac->name);
+#ifdef ERROR_STATISTIC
+ isac->dch.err_tx++;
+#endif
+ isac_retransmit(isac);
+ }
+ if (val & ISACX_D_XMR) {
+ pr_debug("%s: ISAC XMR\n", isac->name);
+#ifdef ERROR_STATISTIC
+ isac->dch.err_tx++;
+#endif
+ isac_retransmit(isac);
+ }
+ if (val & ISACX_D_XPR)
+ isac_xpr_irq(isac);
+ if (val & ISACX_D_RFO) {
+ pr_debug("%s: ISAC RFO\n", isac->name);
+ WriteISAC(isac, ISACX_CMDRD, ISACX_CMDRD_RMC);
+ }
+ if (val & ISACX_D_RME)
+ isacsx_rme_irq(isac);
+ if (val & ISACX_D_RPF)
+ isac_empty_fifo(isac, 0x20);
+ }
+ } else {
+ if (val & 0x80) /* RME */
+ isac_rme_irq(isac);
+ if (val & 0x40) /* RPF */
+ isac_empty_fifo(isac, 32);
+ if (val & 0x10) /* XPR */
+ isac_xpr_irq(isac);
+ if (val & 0x04) /* CISQ */
+ isac_cisq_irq(isac);
+ if (val & 0x20) /* RSC - never */
+ pr_debug("%s: ISAC RSC interrupt\n", isac->name);
+ if (val & 0x02) /* SIN - never */
+ pr_debug("%s: ISAC SIN interrupt\n", isac->name);
+ if (val & 0x01) { /* EXI */
+ val = ReadISAC(isac, ISAC_EXIR);
+ pr_debug("%s: ISAC EXIR %02x\n", isac->name, val);
+ if (val & 0x80) /* XMR */
+ pr_debug("%s: ISAC XMR\n", isac->name);
+ if (val & 0x40) { /* XDU */
+ pr_debug("%s: ISAC XDU\n", isac->name);
+#ifdef ERROR_STATISTIC
+ isac->dch.err_tx++;
+#endif
+ isac_retransmit(isac);
+ }
+ if (val & 0x04) /* MOS */
+ isac_mos_irq(isac);
+ }
+ }
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(mISDNisac_irq);
+
+static int
+isac_l1hw(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct isac_hw *isac = container_of(dch, struct isac_hw, dch);
+ int ret = -EINVAL;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(isac->hwlock, flags);
+ ret = dchannel_senddata(dch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ isac_fill_fifo(isac);
+ ret = 0;
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ ret = l1_event(dch->l1, hh->prim);
+ break;
+ case PH_DEACTIVATE_REQ:
+ test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+ ret = l1_event(dch->l1, hh->prim);
+ break;
+ }
+
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static int
+isac_ctrl(struct isac_hw *isac, u32 cmd, u_long para)
+{
+ u8 tl = 0;
+ u_long flags;
+
+ switch (cmd) {
+ case HW_TESTLOOP:
+ spin_lock_irqsave(isac->hwlock, flags);
+ if (!(isac->type & IPAC_TYPE_ISACX)) {
+ /* TODO: implement for IPAC_TYPE_ISACX */
+ if (para & 1) /* B1 */
+ tl |= 0x0c;
+ else if (para & 2) /* B2 */
+ tl |= 0x3;
+ /* we only support IOM2 mode */
+ WriteISAC(isac, ISAC_SPCR, tl);
+ if (tl)
+ WriteISAC(isac, ISAC_ADF1, 0x8);
+ else
+ WriteISAC(isac, ISAC_ADF1, 0x0);
+ }
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ break;
+ default:
+ pr_debug("%s: %s unknown command %x %lx\n", isac->name,
+ __func__, cmd, para);
+ return -1;
+ }
+ return 0;
+}
+
+static int
+isac_l1cmd(struct dchannel *dch, u32 cmd)
+{
+ struct isac_hw *isac = container_of(dch, struct isac_hw, dch);
+ u_long flags;
+
+ pr_debug("%s: cmd(%x) state(%02x)\n", isac->name, cmd, isac->state);
+ switch (cmd) {
+ case INFO3_P8:
+ spin_lock_irqsave(isac->hwlock, flags);
+ ph_command(isac, ISAC_CMD_AR8);
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ break;
+ case INFO3_P10:
+ spin_lock_irqsave(isac->hwlock, flags);
+ ph_command(isac, ISAC_CMD_AR10);
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ break;
+ case HW_RESET_REQ:
+ spin_lock_irqsave(isac->hwlock, flags);
+ if ((isac->state == ISAC_IND_EI) ||
+ (isac->state == ISAC_IND_DR) ||
+ (isac->state == ISAC_IND_RS))
+ ph_command(isac, ISAC_CMD_TIM);
+ else
+ ph_command(isac, ISAC_CMD_RS);
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ break;
+ case HW_DEACT_REQ:
+ skb_queue_purge(&dch->squeue);
+ if (dch->tx_skb) {
+ dev_kfree_skb(dch->tx_skb);
+ dch->tx_skb = NULL;
+ }
+ dch->tx_idx = 0;
+ if (dch->rx_skb) {
+ dev_kfree_skb(dch->rx_skb);
+ dch->rx_skb = NULL;
+ }
+ test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+ if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+ del_timer(&dch->timer);
+ break;
+ case HW_POWERUP_REQ:
+ spin_lock_irqsave(isac->hwlock, flags);
+ ph_command(isac, ISAC_CMD_TIM);
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ break;
+ case PH_ACTIVATE_IND:
+ test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+ _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+ GFP_ATOMIC);
+ break;
+ case PH_DEACTIVATE_IND:
+ test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+ _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+ GFP_ATOMIC);
+ break;
+ default:
+ pr_debug("%s: %s unknown command %x\n", isac->name,
+ __func__, cmd);
+ return -1;
+ }
+ return 0;
+}
+
+static void
+isac_release(struct isac_hw *isac)
+{
+ if (isac->type & IPAC_TYPE_ISACX)
+ WriteISAC(isac, ISACX_MASK, 0xff);
+ else
+ WriteISAC(isac, ISAC_MASK, 0xff);
+ if (isac->dch.timer.function != NULL) {
+ del_timer(&isac->dch.timer);
+ isac->dch.timer.function = NULL;
+ }
+ kfree(isac->mon_rx);
+ isac->mon_rx = NULL;
+ kfree(isac->mon_tx);
+ isac->mon_tx = NULL;
+ if (isac->dch.l1)
+ l1_event(isac->dch.l1, CLOSE_CHANNEL);
+ mISDN_freedchannel(&isac->dch);
+}
+
+static void
+dbusy_timer_handler(struct isac_hw *isac)
+{
+ int rbch, star;
+ u_long flags;
+
+ if (test_bit(FLG_BUSY_TIMER, &isac->dch.Flags)) {
+ spin_lock_irqsave(isac->hwlock, flags);
+ rbch = ReadISAC(isac, ISAC_RBCH);
+ star = ReadISAC(isac, ISAC_STAR);
+ pr_debug("%s: D-Channel Busy RBCH %02x STAR %02x\n",
+ isac->name, rbch, star);
+ if (rbch & ISAC_RBCH_XAC) /* D-Channel Busy */
+ test_and_set_bit(FLG_L1_BUSY, &isac->dch.Flags);
+ else {
+ /* discard frame; reset transceiver */
+ test_and_clear_bit(FLG_BUSY_TIMER, &isac->dch.Flags);
+ if (isac->dch.tx_idx)
+ isac->dch.tx_idx = 0;
+ else
+ pr_info("%s: ISAC D-Channel Busy no tx_idx\n",
+ isac->name);
+ /* Transmitter reset */
+ WriteISAC(isac, ISAC_CMDR, 0x01);
+ }
+ spin_unlock_irqrestore(isac->hwlock, flags);
+ }
+}
+
+static int
+open_dchannel(struct isac_hw *isac, struct channel_req *rq)
+{
+ pr_debug("%s: %s dev(%d) open from %p\n", isac->name, __func__,
+ isac->dch.dev.id, __builtin_return_address(1));
+ if (rq->protocol != ISDN_P_TE_S0)
+ return -EINVAL;
+ if (rq->adr.channel == 1)
+ /* E-Channel not supported */
+ return -EINVAL;
+ rq->ch = &isac->dch.dev.D;
+ rq->ch->protocol = rq->protocol;
+ if (isac->dch.state == 7)
+ _queue_data(rq->ch, PH_ACTIVATE_IND, MISDN_ID_ANY,
+ 0, NULL, GFP_KERNEL);
+ return 0;
+}
+
+static const char *ISACVer[] =
+{"2086/2186 V1.1", "2085 B1", "2085 B2",
+ "2085 V2.3"};
+
+static int
+isac_init(struct isac_hw *isac)
+{
+ u8 val;
+ int err = 0;
+
+ if (!isac->dch.l1) {
+ err = create_l1(&isac->dch, isac_l1cmd);
+ if (err)
+ return err;
+ }
+ isac->mon_tx = NULL;
+ isac->mon_rx = NULL;
+ isac->dch.timer.function = (void *) dbusy_timer_handler;
+ isac->dch.timer.data = (long)isac;
+ init_timer(&isac->dch.timer);
+ isac->mocr = 0xaa;
+ if (isac->type & IPAC_TYPE_ISACX) {
+ /* Disable all IRQ */
+ WriteISAC(isac, ISACX_MASK, 0xff);
+ val = ReadISAC(isac, ISACX_STARD);
+ pr_debug("%s: ISACX STARD %x\n", isac->name, val);
+ val = ReadISAC(isac, ISACX_ISTAD);
+ pr_debug("%s: ISACX ISTAD %x\n", isac->name, val);
+ val = ReadISAC(isac, ISACX_ISTA);
+ pr_debug("%s: ISACX ISTA %x\n", isac->name, val);
+ /* clear LDD */
+ WriteISAC(isac, ISACX_TR_CONF0, 0x00);
+ /* enable transmitter */
+ WriteISAC(isac, ISACX_TR_CONF2, 0x00);
+ /* transparent mode 0, RAC, stop/go */
+ WriteISAC(isac, ISACX_MODED, 0xc9);
+ /* all HDLC IRQ unmasked */
+ val = ReadISAC(isac, ISACX_ID);
+ if (isac->dch.debug & DEBUG_HW)
+ pr_notice("%s: ISACX Design ID %x\n",
+ isac->name, val & 0x3f);
+ val = ReadISAC(isac, ISACX_CIR0);
+ pr_debug("%s: ISACX CIR0 %02X\n", isac->name, val);
+ isac->state = val >> 4;
+ isac_ph_state_change(isac);
+ ph_command(isac, ISAC_CMD_RS);
+ WriteISAC(isac, ISACX_MASK, IPACX__ON);
+ WriteISAC(isac, ISACX_MASKD, 0x00);
+ } else { /* old isac */
+ WriteISAC(isac, ISAC_MASK, 0xff);
+ val = ReadISAC(isac, ISAC_STAR);
+ pr_debug("%s: ISAC STAR %x\n", isac->name, val);
+ val = ReadISAC(isac, ISAC_MODE);
+ pr_debug("%s: ISAC MODE %x\n", isac->name, val);
+ val = ReadISAC(isac, ISAC_ADF2);
+ pr_debug("%s: ISAC ADF2 %x\n", isac->name, val);
+ val = ReadISAC(isac, ISAC_ISTA);
+ pr_debug("%s: ISAC ISTA %x\n", isac->name, val);
+ if (val & 0x01) {
+ val = ReadISAC(isac, ISAC_EXIR);
+ pr_debug("%s: ISAC EXIR %x\n", isac->name, val);
+ }
+ val = ReadISAC(isac, ISAC_RBCH);
+ if (isac->dch.debug & DEBUG_HW)
+ pr_notice("%s: ISAC version (%x): %s\n", isac->name,
+ val, ISACVer[(val >> 5) & 3]);
+ isac->type |= ((val >> 5) & 3);
+ if (!isac->adf2)
+ isac->adf2 = 0x80;
+ if (!(isac->adf2 & 0x80)) { /* only IOM 2 Mode */
+ pr_info("%s: only support IOM2 mode but adf2=%02x\n",
+ isac->name, isac->adf2);
+ isac_release(isac);
+ return -EINVAL;
+ }
+ WriteISAC(isac, ISAC_ADF2, isac->adf2);
+ WriteISAC(isac, ISAC_SQXR, 0x2f);
+ WriteISAC(isac, ISAC_SPCR, 0x00);
+ WriteISAC(isac, ISAC_STCR, 0x70);
+ WriteISAC(isac, ISAC_MODE, 0xc9);
+ WriteISAC(isac, ISAC_TIMR, 0x00);
+ WriteISAC(isac, ISAC_ADF1, 0x00);
+ val = ReadISAC(isac, ISAC_CIR0);
+ pr_debug("%s: ISAC CIR0 %x\n", isac->name, val);
+ isac->state = (val >> 2) & 0xf;
+ isac_ph_state_change(isac);
+ ph_command(isac, ISAC_CMD_RS);
+ WriteISAC(isac, ISAC_MASK, 0);
+ }
+ return err;
+}
+
+int
+mISDNisac_init(struct isac_hw *isac, void *hw)
+{
+ mISDN_initdchannel(&isac->dch, MAX_DFRAME_LEN_L1, isac_ph_state_bh);
+ isac->dch.hw = hw;
+ isac->dch.dev.D.send = isac_l1hw;
+ isac->init = isac_init;
+ isac->release = isac_release;
+ isac->ctrl = isac_ctrl;
+ isac->open = open_dchannel;
+ isac->dch.dev.Dprotocols = (1 << ISDN_P_TE_S0);
+ isac->dch.dev.nrbchan = 2;
+ return 0;
+}
+EXPORT_SYMBOL(mISDNisac_init);
+
+static void
+waitforCEC(struct hscx_hw *hx)
+{
+ u8 starb, to = 50;
+
+ while (to) {
+ starb = ReadHSCX(hx, IPAC_STARB);
+ if (!(starb & 0x04))
+ break;
+ udelay(1);
+ to--;
+ }
+ if (to < 50)
+ pr_debug("%s: B%1d CEC %d us\n", hx->ip->name, hx->bch.nr,
+ 50 - to);
+ if (!to)
+ pr_info("%s: B%1d CEC timeout\n", hx->ip->name, hx->bch.nr);
+}
+
+
+static void
+waitforXFW(struct hscx_hw *hx)
+{
+ u8 starb, to = 50;
+
+ while (to) {
+ starb = ReadHSCX(hx, IPAC_STARB);
+ if ((starb & 0x44) == 0x40)
+ break;
+ udelay(1);
+ to--;
+ }
+ if (to < 50)
+ pr_debug("%s: B%1d XFW %d us\n", hx->ip->name, hx->bch.nr,
+ 50 - to);
+ if (!to)
+ pr_info("%s: B%1d XFW timeout\n", hx->ip->name, hx->bch.nr);
+}
+
+static void
+hscx_cmdr(struct hscx_hw *hx, u8 cmd)
+{
+ if (hx->ip->type & IPAC_TYPE_IPACX)
+ WriteHSCX(hx, IPACX_CMDRB, cmd);
+ else {
+ waitforCEC(hx);
+ WriteHSCX(hx, IPAC_CMDRB, cmd);
+ }
+}
+
+static void
+hscx_empty_fifo(struct hscx_hw *hscx, u8 count)
+{
+ u8 *p;
+
+ pr_debug("%s: B%1d %d\n", hscx->ip->name, hscx->bch.nr, count);
+ if (!hscx->bch.rx_skb) {
+ hscx->bch.rx_skb = mI_alloc_skb(hscx->bch.maxlen, GFP_ATOMIC);
+ if (!hscx->bch.rx_skb) {
+ pr_info("%s: B receive out of memory\n",
+ hscx->ip->name);
+ hscx_cmdr(hscx, 0x80); /* RMC */
+ return;
+ }
+ }
+ if ((hscx->bch.rx_skb->len + count) > hscx->bch.maxlen) {
+ pr_debug("%s: overrun %d\n", hscx->ip->name,
+ hscx->bch.rx_skb->len + count);
+ skb_trim(hscx->bch.rx_skb, 0);
+ hscx_cmdr(hscx, 0x80); /* RMC */
+ return;
+ }
+ p = skb_put(hscx->bch.rx_skb, count);
+
+ if (hscx->ip->type & IPAC_TYPE_IPACX)
+ hscx->ip->read_fifo(hscx->ip->hw,
+ hscx->off + IPACX_RFIFOB, p, count);
+ else
+ hscx->ip->read_fifo(hscx->ip->hw,
+ hscx->off, p, count);
+
+ hscx_cmdr(hscx, 0x80); /* RMC */
+
+ if (hscx->bch.debug & DEBUG_HW_BFIFO) {
+ snprintf(hscx->log, 64, "B%1d-recv %s %d ",
+ hscx->bch.nr, hscx->ip->name, count);
+ print_hex_dump_bytes(hscx->log, DUMP_PREFIX_OFFSET, p, count);
+ }
+}
+
+static void
+hscx_fill_fifo(struct hscx_hw *hscx)
+{
+ int count, more;
+ u8 *p;
+
+ if (!hscx->bch.tx_skb)
+ return;
+ count = hscx->bch.tx_skb->len - hscx->bch.tx_idx;
+ if (count <= 0)
+ return;
+ p = hscx->bch.tx_skb->data + hscx->bch.tx_idx;
+
+ more = test_bit(FLG_TRANSPARENT, &hscx->bch.Flags) ? 1 : 0;
+ if (count > hscx->fifo_size) {
+ count = hscx->fifo_size;
+ more = 1;
+ }
+ pr_debug("%s: B%1d %d/%d/%d\n", hscx->ip->name, hscx->bch.nr, count,
+ hscx->bch.tx_idx, hscx->bch.tx_skb->len);
+ hscx->bch.tx_idx += count;
+
+ if (hscx->ip->type & IPAC_TYPE_IPACX)
+ hscx->ip->write_fifo(hscx->ip->hw,
+ hscx->off + IPACX_XFIFOB, p, count);
+ else {
+ waitforXFW(hscx);
+ hscx->ip->write_fifo(hscx->ip->hw,
+ hscx->off, p, count);
+ }
+ hscx_cmdr(hscx, more ? 0x08 : 0x0a);
+
+ if (hscx->bch.debug & DEBUG_HW_BFIFO) {
+ snprintf(hscx->log, 64, "B%1d-send %s %d ",
+ hscx->bch.nr, hscx->ip->name, count);
+ print_hex_dump_bytes(hscx->log, DUMP_PREFIX_OFFSET, p, count);
+ }
+}
+
+static void
+hscx_xpr(struct hscx_hw *hx)
+{
+ if (hx->bch.tx_skb && hx->bch.tx_idx < hx->bch.tx_skb->len)
+ hscx_fill_fifo(hx);
+ else {
+ if (hx->bch.tx_skb) {
+ /* send confirm, on trans, free on hdlc. */
+ if (test_bit(FLG_TRANSPARENT, &hx->bch.Flags))
+ confirm_Bsend(&hx->bch);
+ dev_kfree_skb(hx->bch.tx_skb);
+ }
+ if (get_next_bframe(&hx->bch))
+ hscx_fill_fifo(hx);
+ }
+}
+
+static void
+ipac_rme(struct hscx_hw *hx)
+{
+ int count;
+ u8 rstab;
+
+ if (hx->ip->type & IPAC_TYPE_IPACX)
+ rstab = ReadHSCX(hx, IPACX_RSTAB);
+ else
+ rstab = ReadHSCX(hx, IPAC_RSTAB);
+ pr_debug("%s: B%1d RSTAB %02x\n", hx->ip->name, hx->bch.nr, rstab);
+ if ((rstab & 0xf0) != 0xa0) {
+ /* !(VFR && !RDO && CRC && !RAB) */
+ if (!(rstab & 0x80)) {
+ if (hx->bch.debug & DEBUG_HW_BCHANNEL)
+ pr_notice("%s: B%1d invalid frame\n",
+ hx->ip->name, hx->bch.nr);
+ }
+ if (rstab & 0x40) {
+ if (hx->bch.debug & DEBUG_HW_BCHANNEL)
+ pr_notice("%s: B%1d RDO proto=%x\n",
+ hx->ip->name, hx->bch.nr,
+ hx->bch.state);
+ }
+ if (!(rstab & 0x20)) {
+ if (hx->bch.debug & DEBUG_HW_BCHANNEL)
+ pr_notice("%s: B%1d CRC error\n",
+ hx->ip->name, hx->bch.nr);
+ }
+ hscx_cmdr(hx, 0x80); /* Do RMC */
+ return;
+ }
+ if (hx->ip->type & IPAC_TYPE_IPACX)
+ count = ReadHSCX(hx, IPACX_RBCLB);
+ else
+ count = ReadHSCX(hx, IPAC_RBCLB);
+ count &= (hx->fifo_size - 1);
+ if (count == 0)
+ count = hx->fifo_size;
+ hscx_empty_fifo(hx, count);
+ if (!hx->bch.rx_skb)
+ return;
+ if (hx->bch.rx_skb->len < 2) {
+ pr_debug("%s: B%1d frame to short %d\n",
+ hx->ip->name, hx->bch.nr, hx->bch.rx_skb->len);
+ skb_trim(hx->bch.rx_skb, 0);
+ } else {
+ skb_trim(hx->bch.rx_skb, hx->bch.rx_skb->len - 1);
+ recv_Bchannel(&hx->bch, 0);
+ }
+}
+
+static void
+ipac_irq(struct hscx_hw *hx, u8 ista)
+{
+ u8 istab, m, exirb = 0;
+
+ if (hx->ip->type & IPAC_TYPE_IPACX)
+ istab = ReadHSCX(hx, IPACX_ISTAB);
+ else if (hx->ip->type & IPAC_TYPE_IPAC) {
+ istab = ReadHSCX(hx, IPAC_ISTAB);
+ m = (hx->bch.nr & 1) ? IPAC__EXA : IPAC__EXB;
+ if (m & ista) {
+ exirb = ReadHSCX(hx, IPAC_EXIRB);
+ pr_debug("%s: B%1d EXIRB %02x\n", hx->ip->name,
+ hx->bch.nr, exirb);
+ }
+ } else if (hx->bch.nr & 2) { /* HSCX B */
+ if (ista & (HSCX__EXA | HSCX__ICA))
+ ipac_irq(&hx->ip->hscx[0], ista);
+ if (ista & HSCX__EXB) {
+ exirb = ReadHSCX(hx, IPAC_EXIRB);
+ pr_debug("%s: B%1d EXIRB %02x\n", hx->ip->name,
+ hx->bch.nr, exirb);
+ }
+ istab = ista & 0xF8;
+ } else { /* HSCX A */
+ istab = ReadHSCX(hx, IPAC_ISTAB);
+ if (ista & HSCX__EXA) {
+ exirb = ReadHSCX(hx, IPAC_EXIRB);
+ pr_debug("%s: B%1d EXIRB %02x\n", hx->ip->name,
+ hx->bch.nr, exirb);
+ }
+ istab = istab & 0xF8;
+ }
+ if (exirb & IPAC_B_XDU)
+ istab |= IPACX_B_XDU;
+ if (exirb & IPAC_B_RFO)
+ istab |= IPACX_B_RFO;
+ pr_debug("%s: B%1d ISTAB %02x\n", hx->ip->name, hx->bch.nr, istab);
+
+ if (!test_bit(FLG_ACTIVE, &hx->bch.Flags))
+ return;
+
+ if (istab & IPACX_B_RME)
+ ipac_rme(hx);
+
+ if (istab & IPACX_B_RPF) {
+ hscx_empty_fifo(hx, hx->fifo_size);
+ if (test_bit(FLG_TRANSPARENT, &hx->bch.Flags)) {
+ /* receive transparent audio data */
+ if (hx->bch.rx_skb)
+ recv_Bchannel(&hx->bch, 0);
+ }
+ }
+
+ if (istab & IPACX_B_RFO) {
+ pr_debug("%s: B%1d RFO error\n", hx->ip->name, hx->bch.nr);
+ hscx_cmdr(hx, 0x40); /* RRES */
+ }
+
+ if (istab & IPACX_B_XPR)
+ hscx_xpr(hx);
+
+ if (istab & IPACX_B_XDU) {
+ if (test_bit(FLG_TRANSPARENT, &hx->bch.Flags)) {
+ hscx_fill_fifo(hx);
+ return;
+ }
+ pr_debug("%s: B%1d XDU error at len %d\n", hx->ip->name,
+ hx->bch.nr, hx->bch.tx_idx);
+ hx->bch.tx_idx = 0;
+ hscx_cmdr(hx, 0x01); /* XRES */
+ }
+}
+
+irqreturn_t
+mISDNipac_irq(struct ipac_hw *ipac, int maxloop)
+{
+ int cnt = maxloop + 1;
+ u8 ista, istad;
+ struct isac_hw *isac = &ipac->isac;
+
+ if (ipac->type & IPAC_TYPE_IPACX) {
+ ista = ReadIPAC(ipac, ISACX_ISTA);
+ while (ista && cnt--) {
+ pr_debug("%s: ISTA %02x\n", ipac->name, ista);
+ if (ista & IPACX__ICA)
+ ipac_irq(&ipac->hscx[0], ista);
+ if (ista & IPACX__ICB)
+ ipac_irq(&ipac->hscx[1], ista);
+ if (ista & (ISACX__ICD | ISACX__CIC))
+ mISDNisac_irq(&ipac->isac, ista);
+ ista = ReadIPAC(ipac, ISACX_ISTA);
+ }
+ } else if (ipac->type & IPAC_TYPE_IPAC) {
+ ista = ReadIPAC(ipac, IPAC_ISTA);
+ while (ista && cnt--) {
+ pr_debug("%s: ISTA %02x\n", ipac->name, ista);
+ if (ista & (IPAC__ICD | IPAC__EXD)) {
+ istad = ReadISAC(isac, ISAC_ISTA);
+ pr_debug("%s: ISTAD %02x\n", ipac->name, istad);
+ if (istad & IPAC_D_TIN2)
+ pr_debug("%s TIN2 irq\n", ipac->name);
+ if (ista & IPAC__EXD)
+ istad |= 1; /* ISAC EXI */
+ mISDNisac_irq(isac, istad);
+ }
+ if (ista & (IPAC__ICA | IPAC__EXA))
+ ipac_irq(&ipac->hscx[0], ista);
+ if (ista & (IPAC__ICB | IPAC__EXB))
+ ipac_irq(&ipac->hscx[1], ista);
+ ista = ReadIPAC(ipac, IPAC_ISTA);
+ }
+ } else if (ipac->type & IPAC_TYPE_HSCX) {
+ while (cnt) {
+ ista = ReadIPAC(ipac, IPAC_ISTAB + ipac->hscx[1].off);
+ pr_debug("%s: B2 ISTA %02x\n", ipac->name, ista);
+ if (ista)
+ ipac_irq(&ipac->hscx[1], ista);
+ istad = ReadISAC(isac, ISAC_ISTA);
+ pr_debug("%s: ISTAD %02x\n", ipac->name, istad);
+ if (istad)
+ mISDNisac_irq(isac, istad);
+ if (0 == (ista | istad))
+ break;
+ cnt--;
+ }
+ }
+ if (cnt > maxloop) /* only for ISAC/HSCX without PCI IRQ test */
+ return IRQ_NONE;
+ if (cnt < maxloop)
+ pr_debug("%s: %d irqloops cpu%d\n", ipac->name,
+ maxloop - cnt, smp_processor_id());
+ if (maxloop && !cnt)
+ pr_notice("%s: %d IRQ LOOP cpu%d\n", ipac->name,
+ maxloop, smp_processor_id());
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(mISDNipac_irq);
+
+static int
+hscx_mode(struct hscx_hw *hscx, u32 bprotocol)
+{
+ pr_debug("%s: HSCX %c protocol %x-->%x ch %d\n", hscx->ip->name,
+ '@' + hscx->bch.nr, hscx->bch.state, bprotocol, hscx->bch.nr);
+ if (hscx->ip->type & IPAC_TYPE_IPACX) {
+ if (hscx->bch.nr & 1) { /* B1 and ICA */
+ WriteIPAC(hscx->ip, ISACX_BCHA_TSDP_BC1, 0x80);
+ WriteIPAC(hscx->ip, ISACX_BCHA_CR, 0x88);
+ } else { /* B2 and ICB */
+ WriteIPAC(hscx->ip, ISACX_BCHB_TSDP_BC1, 0x81);
+ WriteIPAC(hscx->ip, ISACX_BCHB_CR, 0x88);
+ }
+ switch (bprotocol) {
+ case ISDN_P_NONE: /* init */
+ WriteHSCX(hscx, IPACX_MODEB, 0xC0); /* rec off */
+ WriteHSCX(hscx, IPACX_EXMB, 0x30); /* std adj. */
+ WriteHSCX(hscx, IPACX_MASKB, 0xFF); /* ints off */
+ hscx_cmdr(hscx, 0x41);
+ test_and_clear_bit(FLG_HDLC, &hscx->bch.Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &hscx->bch.Flags);
+ break;
+ case ISDN_P_B_RAW:
+ WriteHSCX(hscx, IPACX_MODEB, 0x88); /* ex trans */
+ WriteHSCX(hscx, IPACX_EXMB, 0x00); /* trans */
+ hscx_cmdr(hscx, 0x41);
+ WriteHSCX(hscx, IPACX_MASKB, IPACX_B_ON);
+ test_and_set_bit(FLG_TRANSPARENT, &hscx->bch.Flags);
+ break;
+ case ISDN_P_B_HDLC:
+ WriteHSCX(hscx, IPACX_MODEB, 0xC0); /* trans */
+ WriteHSCX(hscx, IPACX_EXMB, 0x00); /* hdlc,crc */
+ hscx_cmdr(hscx, 0x41);
+ WriteHSCX(hscx, IPACX_MASKB, IPACX_B_ON);
+ test_and_set_bit(FLG_HDLC, &hscx->bch.Flags);
+ break;
+ default:
+ pr_info("%s: protocol not known %x\n", hscx->ip->name,
+ bprotocol);
+ return -ENOPROTOOPT;
+ }
+ } else if (hscx->ip->type & IPAC_TYPE_IPAC) { /* IPAC */
+ WriteHSCX(hscx, IPAC_CCR1, 0x82);
+ WriteHSCX(hscx, IPAC_CCR2, 0x30);
+ WriteHSCX(hscx, IPAC_XCCR, 0x07);
+ WriteHSCX(hscx, IPAC_RCCR, 0x07);
+ WriteHSCX(hscx, IPAC_TSAX, hscx->slot);
+ WriteHSCX(hscx, IPAC_TSAR, hscx->slot);
+ switch (bprotocol) {
+ case ISDN_P_NONE:
+ WriteHSCX(hscx, IPAC_TSAX, 0x1F);
+ WriteHSCX(hscx, IPAC_TSAR, 0x1F);
+ WriteHSCX(hscx, IPAC_MODEB, 0x84);
+ WriteHSCX(hscx, IPAC_CCR1, 0x82);
+ WriteHSCX(hscx, IPAC_MASKB, 0xFF); /* ints off */
+ test_and_clear_bit(FLG_HDLC, &hscx->bch.Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &hscx->bch.Flags);
+ break;
+ case ISDN_P_B_RAW:
+ WriteHSCX(hscx, IPAC_MODEB, 0xe4); /* ex trans */
+ WriteHSCX(hscx, IPAC_CCR1, 0x82);
+ hscx_cmdr(hscx, 0x41);
+ WriteHSCX(hscx, IPAC_MASKB, 0);
+ test_and_set_bit(FLG_TRANSPARENT, &hscx->bch.Flags);
+ break;
+ case ISDN_P_B_HDLC:
+ WriteHSCX(hscx, IPAC_MODEB, 0x8c);
+ WriteHSCX(hscx, IPAC_CCR1, 0x8a);
+ hscx_cmdr(hscx, 0x41);
+ WriteHSCX(hscx, IPAC_MASKB, 0);
+ test_and_set_bit(FLG_HDLC, &hscx->bch.Flags);
+ break;
+ default:
+ pr_info("%s: protocol not known %x\n", hscx->ip->name,
+ bprotocol);
+ return -ENOPROTOOPT;
+ }
+ } else if (hscx->ip->type & IPAC_TYPE_HSCX) { /* HSCX */
+ WriteHSCX(hscx, IPAC_CCR1, 0x85);
+ WriteHSCX(hscx, IPAC_CCR2, 0x30);
+ WriteHSCX(hscx, IPAC_XCCR, 0x07);
+ WriteHSCX(hscx, IPAC_RCCR, 0x07);
+ WriteHSCX(hscx, IPAC_TSAX, hscx->slot);
+ WriteHSCX(hscx, IPAC_TSAR, hscx->slot);
+ switch (bprotocol) {
+ case ISDN_P_NONE:
+ WriteHSCX(hscx, IPAC_TSAX, 0x1F);
+ WriteHSCX(hscx, IPAC_TSAR, 0x1F);
+ WriteHSCX(hscx, IPAC_MODEB, 0x84);
+ WriteHSCX(hscx, IPAC_CCR1, 0x85);
+ WriteHSCX(hscx, IPAC_MASKB, 0xFF); /* ints off */
+ test_and_clear_bit(FLG_HDLC, &hscx->bch.Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &hscx->bch.Flags);
+ break;
+ case ISDN_P_B_RAW:
+ WriteHSCX(hscx, IPAC_MODEB, 0xe4); /* ex trans */
+ WriteHSCX(hscx, IPAC_CCR1, 0x85);
+ hscx_cmdr(hscx, 0x41);
+ WriteHSCX(hscx, IPAC_MASKB, 0);
+ test_and_set_bit(FLG_TRANSPARENT, &hscx->bch.Flags);
+ break;
+ case ISDN_P_B_HDLC:
+ WriteHSCX(hscx, IPAC_MODEB, 0x8c);
+ WriteHSCX(hscx, IPAC_CCR1, 0x8d);
+ hscx_cmdr(hscx, 0x41);
+ WriteHSCX(hscx, IPAC_MASKB, 0);
+ test_and_set_bit(FLG_HDLC, &hscx->bch.Flags);
+ break;
+ default:
+ pr_info("%s: protocol not known %x\n", hscx->ip->name,
+ bprotocol);
+ return -ENOPROTOOPT;
+ }
+ } else
+ return -EINVAL;
+ hscx->bch.state = bprotocol;
+ return 0;
+}
+
+static int
+hscx_l2l1(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct hscx_hw *hx = container_of(bch, struct hscx_hw, bch);
+ int ret = -EINVAL;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(hx->ip->hwlock, flags);
+ ret = bchannel_senddata(bch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ ret = 0;
+ hscx_fill_fifo(hx);
+ spin_unlock_irqrestore(hx->ip->hwlock, flags);
+ if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(hx->ip->hwlock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ spin_lock_irqsave(hx->ip->hwlock, flags);
+ if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+ ret = hscx_mode(hx, ch->protocol);
+ else
+ ret = 0;
+ spin_unlock_irqrestore(hx->ip->hwlock, flags);
+ if (!ret)
+ _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ break;
+ case PH_DEACTIVATE_REQ:
+ spin_lock_irqsave(hx->ip->hwlock, flags);
+ mISDN_clear_bchannel(bch);
+ hscx_mode(hx, ISDN_P_NONE);
+ spin_unlock_irqrestore(hx->ip->hwlock, flags);
+ _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ ret = 0;
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x,%x)\n",
+ hx->ip->name, __func__, hh->prim, hh->id);
+ ret = -EINVAL;
+ }
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = 0;
+ break;
+ /* Nothing implemented yet */
+ case MISDN_CTRL_FILL_EMPTY:
+ default:
+ pr_info("%s: unknown Op %x\n", __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+hscx_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct hscx_hw *hx = container_of(bch, struct hscx_hw, bch);
+ int ret = -EINVAL;
+ u_long flags;
+
+ pr_debug("%s: %s cmd:%x %p\n", hx->ip->name, __func__, cmd, arg);
+ switch (cmd) {
+ case CLOSE_CHANNEL:
+ test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ if (test_bit(FLG_ACTIVE, &bch->Flags)) {
+ spin_lock_irqsave(hx->ip->hwlock, flags);
+ mISDN_freebchannel(bch);
+ hscx_mode(hx, ISDN_P_NONE);
+ spin_unlock_irqrestore(hx->ip->hwlock, flags);
+ } else {
+ skb_queue_purge(&bch->rqueue);
+ bch->rcount = 0;
+ }
+ ch->protocol = ISDN_P_NONE;
+ ch->peer = NULL;
+ module_put(hx->ip->owner);
+ ret = 0;
+ break;
+ case CONTROL_CHANNEL:
+ ret = channel_bctrl(bch, arg);
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x)\n",
+ hx->ip->name, __func__, cmd);
+ }
+ return ret;
+}
+
+static void
+free_ipac(struct ipac_hw *ipac)
+{
+ isac_release(&ipac->isac);
+}
+
+static const char *HSCXVer[] =
+{"A1", "?1", "A2", "?3", "A3", "V2.1", "?6", "?7",
+ "?8", "?9", "?10", "?11", "?12", "?13", "?14", "???"};
+
+
+
+static void
+hscx_init(struct hscx_hw *hx)
+{
+ u8 val;
+
+ WriteHSCX(hx, IPAC_RAH2, 0xFF);
+ WriteHSCX(hx, IPAC_XBCH, 0x00);
+ WriteHSCX(hx, IPAC_RLCR, 0x00);
+
+ if (hx->ip->type & IPAC_TYPE_HSCX) {
+ WriteHSCX(hx, IPAC_CCR1, 0x85);
+ val = ReadHSCX(hx, HSCX_VSTR);
+ pr_debug("%s: HSCX VSTR %02x\n", hx->ip->name, val);
+ if (hx->bch.debug & DEBUG_HW)
+ pr_notice("%s: HSCX version %s\n", hx->ip->name,
+ HSCXVer[val & 0x0f]);
+ } else
+ WriteHSCX(hx, IPAC_CCR1, 0x82);
+ WriteHSCX(hx, IPAC_CCR2, 0x30);
+ WriteHSCX(hx, IPAC_XCCR, 0x07);
+ WriteHSCX(hx, IPAC_RCCR, 0x07);
+}
+
+static int
+ipac_init(struct ipac_hw *ipac)
+{
+ u8 val;
+
+ if (ipac->type & IPAC_TYPE_HSCX) {
+ hscx_init(&ipac->hscx[0]);
+ hscx_init(&ipac->hscx[1]);
+ val = ReadIPAC(ipac, IPAC_ID);
+ } else if (ipac->type & IPAC_TYPE_IPAC) {
+ hscx_init(&ipac->hscx[0]);
+ hscx_init(&ipac->hscx[1]);
+ WriteIPAC(ipac, IPAC_MASK, IPAC__ON);
+ val = ReadIPAC(ipac, IPAC_CONF);
+ /* conf is default 0, but can be overwritten by card setup */
+ pr_debug("%s: IPAC CONF %02x/%02x\n", ipac->name,
+ val, ipac->conf);
+ WriteIPAC(ipac, IPAC_CONF, ipac->conf);
+ val = ReadIPAC(ipac, IPAC_ID);
+ if (ipac->hscx[0].bch.debug & DEBUG_HW)
+ pr_notice("%s: IPAC Design ID %02x\n", ipac->name, val);
+ }
+ /* nothing special for IPACX to do here */
+ return isac_init(&ipac->isac);
+}
+
+static int
+open_bchannel(struct ipac_hw *ipac, struct channel_req *rq)
+{
+ struct bchannel *bch;
+
+ if (rq->adr.channel > 2)
+ return -EINVAL;
+ if (rq->protocol == ISDN_P_NONE)
+ return -EINVAL;
+ bch = &ipac->hscx[rq->adr.channel - 1].bch;
+ if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+ return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
+ bch->ch.protocol = rq->protocol;
+ rq->ch = &bch->ch;
+ return 0;
+}
+
+static int
+channel_ctrl(struct ipac_hw *ipac, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = MISDN_CTRL_LOOP;
+ break;
+ case MISDN_CTRL_LOOP:
+ /* cq->channel: 0 disable, 1 B1 loop 2 B2 loop, 3 both */
+ if (cq->channel < 0 || cq->channel > 3) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = ipac->ctrl(ipac, HW_TESTLOOP, cq->channel);
+ break;
+ default:
+ pr_info("%s: unknown CTRL OP %x\n", ipac->name, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+ipac_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct isac_hw *isac = container_of(dch, struct isac_hw, dch);
+ struct ipac_hw *ipac = container_of(isac, struct ipac_hw, isac);
+ struct channel_req *rq;
+ int err = 0;
+
+ pr_debug("%s: DCTRL: %x %p\n", ipac->name, cmd, arg);
+ switch (cmd) {
+ case OPEN_CHANNEL:
+ rq = arg;
+ if (rq->protocol == ISDN_P_TE_S0)
+ err = open_dchannel(isac, rq);
+ else
+ err = open_bchannel(ipac, rq);
+ if (err)
+ break;
+ if (!try_module_get(ipac->owner))
+ pr_info("%s: cannot get module\n", ipac->name);
+ break;
+ case CLOSE_CHANNEL:
+ pr_debug("%s: dev(%d) close from %p\n", ipac->name,
+ dch->dev.id, __builtin_return_address(0));
+ module_put(ipac->owner);
+ break;
+ case CONTROL_CHANNEL:
+ err = channel_ctrl(ipac, arg);
+ break;
+ default:
+ pr_debug("%s: unknown DCTRL command %x\n", ipac->name, cmd);
+ return -EINVAL;
+ }
+ return err;
+}
+
+u32
+mISDNipac_init(struct ipac_hw *ipac, void *hw)
+{
+ u32 ret;
+ u8 i;
+
+ ipac->hw = hw;
+ if (ipac->isac.dch.debug & DEBUG_HW)
+ pr_notice("%s: ipac type %x\n", ipac->name, ipac->type);
+ if (ipac->type & IPAC_TYPE_HSCX) {
+ ipac->isac.type = IPAC_TYPE_ISAC;
+ ipac->hscx[0].off = 0;
+ ipac->hscx[1].off = 0x40;
+ ipac->hscx[0].fifo_size = 32;
+ ipac->hscx[1].fifo_size = 32;
+ } else if (ipac->type & IPAC_TYPE_IPAC) {
+ ipac->isac.type = IPAC_TYPE_IPAC | IPAC_TYPE_ISAC;
+ ipac->hscx[0].off = 0;
+ ipac->hscx[1].off = 0x40;
+ ipac->hscx[0].fifo_size = 64;
+ ipac->hscx[1].fifo_size = 64;
+ } else if (ipac->type & IPAC_TYPE_IPACX) {
+ ipac->isac.type = IPAC_TYPE_IPACX | IPAC_TYPE_ISACX;
+ ipac->hscx[0].off = IPACX_OFF_ICA;
+ ipac->hscx[1].off = IPACX_OFF_ICB;
+ ipac->hscx[0].fifo_size = 64;
+ ipac->hscx[1].fifo_size = 64;
+ } else
+ return 0;
+
+ mISDNisac_init(&ipac->isac, hw);
+
+ ipac->isac.dch.dev.D.ctrl = ipac_dctrl;
+
+ for (i = 0; i < 2; i++) {
+ ipac->hscx[i].bch.nr = i + 1;
+ set_channelmap(i + 1, ipac->isac.dch.dev.channelmap);
+ list_add(&ipac->hscx[i].bch.ch.list,
+ &ipac->isac.dch.dev.bchannels);
+ mISDN_initbchannel(&ipac->hscx[i].bch, MAX_DATA_MEM);
+ ipac->hscx[i].bch.ch.nr = i + 1;
+ ipac->hscx[i].bch.ch.send = &hscx_l2l1;
+ ipac->hscx[i].bch.ch.ctrl = hscx_bctrl;
+ ipac->hscx[i].bch.hw = hw;
+ ipac->hscx[i].ip = ipac;
+ /* default values for IOM time slots
+ * can be overwriten by card */
+ ipac->hscx[i].slot = (i == 0) ? 0x2f : 0x03;
+ }
+
+ ipac->init = ipac_init;
+ ipac->release = free_ipac;
+
+ ret = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+ return ret;
+}
+EXPORT_SYMBOL(mISDNipac_init);
+
+static int __init
+isac_mod_init(void)
+{
+ pr_notice("mISDNipac module version %s\n", ISAC_REV);
+ return 0;
+}
+
+static void __exit
+isac_mod_cleanup(void)
+{
+ pr_notice("mISDNipac module unloaded\n");
+}
+module_init(isac_mod_init);
+module_exit(isac_mod_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
new file mode 100644
index 0000000..de352a1
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -0,0 +1,1726 @@
+/*
+ * mISDNisar.c ISAR (Siemens PSB 7110) specific functions
+ *
+ * Author Karsten Keil (keil@isdn4linux.de)
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* define this to enable static debug messages, if you kernel supports
+ * dynamic debugging, you should use debugfs for this
+ */
+/* #define DEBUG */
+
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/mISDNhw.h>
+#include "isar.h"
+
+#define ISAR_REV "2.1"
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(ISAR_REV);
+
+#define DEBUG_HW_FIRMWARE_FIFO 0x10000
+
+static const u8 faxmodulation_s[] = "3,24,48,72,73,74,96,97,98,121,122,145,146";
+static const u8 faxmodulation[] = {3, 24, 48, 72, 73, 74, 96, 97, 98, 121,
+ 122, 145, 146};
+#define FAXMODCNT 13
+
+static void isar_setup(struct isar_hw *);
+
+static inline int
+waitforHIA(struct isar_hw *isar, int timeout)
+{
+ int t = timeout;
+ u8 val = isar->read_reg(isar->hw, ISAR_HIA);
+
+ while ((val & 1) && t) {
+ udelay(1);
+ t--;
+ val = isar->read_reg(isar->hw, ISAR_HIA);
+ }
+ pr_debug("%s: HIA after %dus\n", isar->name, timeout - t);
+ return timeout;
+}
+
+/*
+ * send msg to ISAR mailbox
+ * if msg is NULL use isar->buf
+ */
+static int
+send_mbox(struct isar_hw *isar, u8 his, u8 creg, u8 len, u8 *msg)
+{
+ if (!waitforHIA(isar, 1000))
+ return 0;
+ pr_debug("send_mbox(%02x,%02x,%d)\n", his, creg, len);
+ isar->write_reg(isar->hw, ISAR_CTRL_H, creg);
+ isar->write_reg(isar->hw, ISAR_CTRL_L, len);
+ isar->write_reg(isar->hw, ISAR_WADR, 0);
+ if (!msg)
+ msg = isar->buf;
+ if (msg && len) {
+ isar->write_fifo(isar->hw, ISAR_MBOX, msg, len);
+ if (isar->ch[0].bch.debug & DEBUG_HW_BFIFO) {
+ int l = 0;
+
+ while (l < (int)len) {
+ hex_dump_to_buffer(msg + l, len - l, 32, 1,
+ isar->log, 256, 1);
+ pr_debug("%s: %s %02x: %s\n", isar->name,
+ __func__, l, isar->log);
+ l += 32;
+ }
+ }
+ }
+ isar->write_reg(isar->hw, ISAR_HIS, his);
+ waitforHIA(isar, 1000);
+ return 1;
+}
+
+/*
+ * receive message from ISAR mailbox
+ * if msg is NULL use isar->buf
+ */
+static void
+rcv_mbox(struct isar_hw *isar, u8 *msg)
+{
+ if (!msg)
+ msg = isar->buf;
+ isar->write_reg(isar->hw, ISAR_RADR, 0);
+ if (msg && isar->clsb) {
+ isar->read_fifo(isar->hw, ISAR_MBOX, msg, isar->clsb);
+ if (isar->ch[0].bch.debug & DEBUG_HW_BFIFO) {
+ int l = 0;
+
+ while (l < (int)isar->clsb) {
+ hex_dump_to_buffer(msg + l, isar->clsb - l, 32,
+ 1, isar->log, 256, 1);
+ pr_debug("%s: %s %02x: %s\n", isar->name,
+ __func__, l, isar->log);
+ l += 32;
+ }
+ }
+ }
+ isar->write_reg(isar->hw, ISAR_IIA, 0);
+}
+
+static inline void
+get_irq_infos(struct isar_hw *isar)
+{
+ isar->iis = isar->read_reg(isar->hw, ISAR_IIS);
+ isar->cmsb = isar->read_reg(isar->hw, ISAR_CTRL_H);
+ isar->clsb = isar->read_reg(isar->hw, ISAR_CTRL_L);
+ pr_debug("%s: rcv_mbox(%02x,%02x,%d)\n", isar->name,
+ isar->iis, isar->cmsb, isar->clsb);
+}
+
+/*
+ * poll answer message from ISAR mailbox
+ * should be used only with ISAR IRQs disabled before DSP was started
+ *
+ */
+static int
+poll_mbox(struct isar_hw *isar, int maxdelay)
+{
+ int t = maxdelay;
+ u8 irq;
+
+ irq = isar->read_reg(isar->hw, ISAR_IRQBIT);
+ while (t && !(irq & ISAR_IRQSTA)) {
+ udelay(1);
+ t--;
+ }
+ if (t) {
+ get_irq_infos(isar);
+ rcv_mbox(isar, NULL);
+ }
+ pr_debug("%s: pulled %d bytes after %d us\n",
+ isar->name, isar->clsb, maxdelay - t);
+ return t;
+}
+
+static int
+ISARVersion(struct isar_hw *isar)
+{
+ int ver;
+
+ /* disable ISAR IRQ */
+ isar->write_reg(isar->hw, ISAR_IRQBIT, 0);
+ isar->buf[0] = ISAR_MSG_HWVER;
+ isar->buf[1] = 0;
+ isar->buf[2] = 1;
+ if (!send_mbox(isar, ISAR_HIS_VNR, 0, 3, NULL))
+ return -1;
+ if (!poll_mbox(isar, 1000))
+ return -2;
+ if (isar->iis == ISAR_IIS_VNR) {
+ if (isar->clsb == 1) {
+ ver = isar->buf[0] & 0xf;
+ return ver;
+ }
+ return -3;
+ }
+ return -4;
+}
+
+static int
+load_firmware(struct isar_hw *isar, const u8 *buf, int size)
+{
+ u32 saved_debug = isar->ch[0].bch.debug;
+ int ret, cnt;
+ u8 nom, noc;
+ u16 left, val, *sp = (u16 *)buf;
+ u8 *mp;
+ u_long flags;
+
+ struct {
+ u16 sadr;
+ u16 len;
+ u16 d_key;
+ } blk_head;
+
+ if (1 != isar->version) {
+ pr_err("%s: ISAR wrong version %d firmware download aborted\n",
+ isar->name, isar->version);
+ return -EINVAL;
+ }
+ if (!(saved_debug & DEBUG_HW_FIRMWARE_FIFO))
+ isar->ch[0].bch.debug &= ~DEBUG_HW_BFIFO;
+ pr_debug("%s: load firmware %d words (%d bytes)\n",
+ isar->name, size/2, size);
+ cnt = 0;
+ size /= 2;
+ /* disable ISAR IRQ */
+ spin_lock_irqsave(isar->hwlock, flags);
+ isar->write_reg(isar->hw, ISAR_IRQBIT, 0);
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ while (cnt < size) {
+ blk_head.sadr = le16_to_cpu(*sp++);
+ blk_head.len = le16_to_cpu(*sp++);
+ blk_head.d_key = le16_to_cpu(*sp++);
+ cnt += 3;
+ pr_debug("ISAR firmware block (%#x,%d,%#x)\n",
+ blk_head.sadr, blk_head.len, blk_head.d_key & 0xff);
+ left = blk_head.len;
+ if (cnt + left > size) {
+ pr_info("%s: firmware error have %d need %d words\n",
+ isar->name, size, cnt + left);
+ ret = -EINVAL;
+ goto reterrflg;
+ }
+ spin_lock_irqsave(isar->hwlock, flags);
+ if (!send_mbox(isar, ISAR_HIS_DKEY, blk_head.d_key & 0xff,
+ 0, NULL)) {
+ pr_info("ISAR send_mbox dkey failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ if (!poll_mbox(isar, 1000)) {
+ pr_warning("ISAR poll_mbox dkey failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ if ((isar->iis != ISAR_IIS_DKEY) || isar->cmsb || isar->clsb) {
+ pr_info("ISAR wrong dkey response (%x,%x,%x)\n",
+ isar->iis, isar->cmsb, isar->clsb);
+ ret = 1;
+ goto reterrflg;
+ }
+ while (left > 0) {
+ if (left > 126)
+ noc = 126;
+ else
+ noc = left;
+ nom = (2 * noc) + 3;
+ mp = isar->buf;
+ /* the ISAR is big endian */
+ *mp++ = blk_head.sadr >> 8;
+ *mp++ = blk_head.sadr & 0xFF;
+ left -= noc;
+ cnt += noc;
+ *mp++ = noc;
+ pr_debug("%s: load %3d words at %04x\n", isar->name,
+ noc, blk_head.sadr);
+ blk_head.sadr += noc;
+ while (noc) {
+ val = le16_to_cpu(*sp++);
+ *mp++ = val >> 8;
+ *mp++ = val & 0xFF;;
+ noc--;
+ }
+ spin_lock_irqsave(isar->hwlock, flags);
+ if (!send_mbox(isar, ISAR_HIS_FIRM, 0, nom, NULL)) {
+ pr_info("ISAR send_mbox prog failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ if (!poll_mbox(isar, 1000)) {
+ pr_info("ISAR poll_mbox prog failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ if ((isar->iis != ISAR_IIS_FIRM) ||
+ isar->cmsb || isar->clsb) {
+ pr_info("ISAR wrong prog response (%x,%x,%x)\n",
+ isar->iis, isar->cmsb, isar->clsb);
+ ret = -EIO;
+ goto reterrflg;
+ }
+ }
+ pr_debug("%s: ISAR firmware block %d words loaded\n",
+ isar->name, blk_head.len);
+ }
+ isar->ch[0].bch.debug = saved_debug;
+ /* 10ms delay */
+ cnt = 10;
+ while (cnt--)
+ mdelay(1);
+ isar->buf[0] = 0xff;
+ isar->buf[1] = 0xfe;
+ isar->bstat = 0;
+ spin_lock_irqsave(isar->hwlock, flags);
+ if (!send_mbox(isar, ISAR_HIS_STDSP, 0, 2, NULL)) {
+ pr_info("ISAR send_mbox start dsp failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ if (!poll_mbox(isar, 1000)) {
+ pr_info("ISAR poll_mbox start dsp failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ if ((isar->iis != ISAR_IIS_STDSP) || isar->cmsb || isar->clsb) {
+ pr_info("ISAR wrong start dsp response (%x,%x,%x)\n",
+ isar->iis, isar->cmsb, isar->clsb);
+ ret = -EIO;
+ goto reterror;
+ } else
+ pr_debug("%s: ISAR start dsp success\n", isar->name);
+
+ /* NORMAL mode entered */
+ /* Enable IRQs of ISAR */
+ isar->write_reg(isar->hw, ISAR_IRQBIT, ISAR_IRQSTA);
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ cnt = 1000; /* max 1s */
+ while ((!isar->bstat) && cnt) {
+ mdelay(1);
+ cnt--;
+ }
+ if (!cnt) {
+ pr_info("ISAR no general status event received\n");
+ ret = -ETIME;
+ goto reterrflg;
+ } else
+ pr_debug("%s: ISAR general status event %x\n",
+ isar->name, isar->bstat);
+ /* 10ms delay */
+ cnt = 10;
+ while (cnt--)
+ mdelay(1);
+ isar->iis = 0;
+ spin_lock_irqsave(isar->hwlock, flags);
+ if (!send_mbox(isar, ISAR_HIS_DIAG, ISAR_CTRL_STST, 0, NULL)) {
+ pr_info("ISAR send_mbox self tst failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ cnt = 10000; /* max 100 ms */
+ while ((isar->iis != ISAR_IIS_DIAG) && cnt) {
+ udelay(10);
+ cnt--;
+ }
+ mdelay(1);
+ if (!cnt) {
+ pr_info("ISAR no self tst response\n");
+ ret = -ETIME;
+ goto reterrflg;
+ }
+ if ((isar->cmsb == ISAR_CTRL_STST) && (isar->clsb == 1)
+ && (isar->buf[0] == 0))
+ pr_debug("%s: ISAR selftest OK\n", isar->name);
+ else {
+ pr_info("ISAR selftest not OK %x/%x/%x\n",
+ isar->cmsb, isar->clsb, isar->buf[0]);
+ ret = -EIO;
+ goto reterrflg;
+ }
+ spin_lock_irqsave(isar->hwlock, flags);
+ isar->iis = 0;
+ if (!send_mbox(isar, ISAR_HIS_DIAG, ISAR_CTRL_SWVER, 0, NULL)) {
+ pr_info("ISAR RQST SVN failed\n");
+ ret = -ETIME;
+ goto reterror;
+ }
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ cnt = 30000; /* max 300 ms */
+ while ((isar->iis != ISAR_IIS_DIAG) && cnt) {
+ udelay(10);
+ cnt--;
+ }
+ mdelay(1);
+ if (!cnt) {
+ pr_info("ISAR no SVN response\n");
+ ret = -ETIME;
+ goto reterrflg;
+ } else {
+ if ((isar->cmsb == ISAR_CTRL_SWVER) && (isar->clsb == 1)) {
+ pr_notice("%s: ISAR software version %#x\n",
+ isar->name, isar->buf[0]);
+ } else {
+ pr_info("%s: ISAR wrong swver response (%x,%x)"
+ " cnt(%d)\n", isar->name, isar->cmsb,
+ isar->clsb, cnt);
+ ret = -EIO;
+ goto reterrflg;
+ }
+ }
+ spin_lock_irqsave(isar->hwlock, flags);
+ isar_setup(isar);
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ ret = 0;
+reterrflg:
+ spin_lock_irqsave(isar->hwlock, flags);
+reterror:
+ isar->ch[0].bch.debug = saved_debug;
+ if (ret)
+ /* disable ISAR IRQ */
+ isar->write_reg(isar->hw, ISAR_IRQBIT, 0);
+ spin_unlock_irqrestore(isar->hwlock, flags);
+ return ret;
+}
+
+static inline void
+deliver_status(struct isar_ch *ch, int status)
+{
+ pr_debug("%s: HL->LL FAXIND %x\n", ch->is->name, status);
+ _queue_data(&ch->bch.ch, PH_CONTROL_IND, status, 0, NULL, GFP_ATOMIC);
+}
+
+static inline void
+isar_rcv_frame(struct isar_ch *ch)
+{
+ u8 *ptr;
+
+ if (!ch->is->clsb) {
+ pr_debug("%s; ISAR zero len frame\n", ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ return;
+ }
+ switch (ch->bch.state) {
+ case ISDN_P_NONE:
+ pr_debug("%s: ISAR protocol 0 spurious IIS_RDATA %x/%x/%x\n",
+ ch->is->name, ch->is->iis, ch->is->cmsb, ch->is->clsb);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ case ISDN_P_B_RAW:
+ case ISDN_P_B_L2DTMF:
+ case ISDN_P_B_MODEM_ASYNC:
+ if (!ch->bch.rx_skb) {
+ ch->bch.rx_skb = mI_alloc_skb(ch->bch.maxlen,
+ GFP_ATOMIC);
+ if (unlikely(!ch->bch.rx_skb)) {
+ pr_info("%s: B receive out of memory\n",
+ ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ }
+ }
+ rcv_mbox(ch->is, skb_put(ch->bch.rx_skb, ch->is->clsb));
+ recv_Bchannel(&ch->bch, 0);
+ break;
+ case ISDN_P_B_HDLC:
+ if (!ch->bch.rx_skb) {
+ ch->bch.rx_skb = mI_alloc_skb(ch->bch.maxlen,
+ GFP_ATOMIC);
+ if (unlikely(!ch->bch.rx_skb)) {
+ pr_info("%s: B receive out of memory\n",
+ ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ }
+ }
+ if ((ch->bch.rx_skb->len + ch->is->clsb) >
+ (ch->bch.maxlen + 2)) {
+ pr_debug("%s: incoming packet too large\n",
+ ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ skb_trim(ch->bch.rx_skb, 0);
+ break;
+ }
+ if (ch->is->cmsb & HDLC_ERROR) {
+ pr_debug("%s: ISAR frame error %x len %d\n",
+ ch->is->name, ch->is->cmsb, ch->is->clsb);
+#ifdef ERROR_STATISTIC
+ if (ch->is->cmsb & HDLC_ERR_RER)
+ ch->bch.err_inv++;
+ if (ch->is->cmsb & HDLC_ERR_CER)
+ ch->bch.err_crc++;
+#endif
+ skb_trim(ch->bch.rx_skb, 0);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ }
+ if (ch->is->cmsb & HDLC_FSD)
+ skb_trim(ch->bch.rx_skb, 0);
+ ptr = skb_put(ch->bch.rx_skb, ch->is->clsb);
+ rcv_mbox(ch->is, ptr);
+ if (ch->is->cmsb & HDLC_FED) {
+ if (ch->bch.rx_skb->len < 3) { /* last 2 are the FCS */
+ pr_debug("%s: ISAR frame to short %d\n",
+ ch->is->name, ch->bch.rx_skb->len);
+ skb_trim(ch->bch.rx_skb, 0);
+ break;
+ }
+ skb_trim(ch->bch.rx_skb, ch->bch.rx_skb->len - 2);
+ recv_Bchannel(&ch->bch, 0);
+ }
+ break;
+ case ISDN_P_B_T30_FAX:
+ if (ch->state != STFAX_ACTIV) {
+ pr_debug("%s: isar_rcv_frame: not ACTIV\n",
+ ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ if (ch->bch.rx_skb)
+ skb_trim(ch->bch.rx_skb, 0);
+ break;
+ }
+ if (!ch->bch.rx_skb) {
+ ch->bch.rx_skb = mI_alloc_skb(ch->bch.maxlen,
+ GFP_ATOMIC);
+ if (unlikely(!ch->bch.rx_skb)) {
+ pr_info("%s: B receive out of memory\n",
+ __func__);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ }
+ }
+ if (ch->cmd == PCTRL_CMD_FRM) {
+ rcv_mbox(ch->is, skb_put(ch->bch.rx_skb, ch->is->clsb));
+ pr_debug("%s: isar_rcv_frame: %d\n",
+ ch->is->name, ch->bch.rx_skb->len);
+ if (ch->is->cmsb & SART_NMD) { /* ABORT */
+ pr_debug("%s: isar_rcv_frame: no more data\n",
+ ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ send_mbox(ch->is, SET_DPS(ch->dpath) |
+ ISAR_HIS_PUMPCTRL, PCTRL_CMD_ESC,
+ 0, NULL);
+ ch->state = STFAX_ESCAPE;
+ /* set_skb_flag(skb, DF_NOMOREDATA); */
+ }
+ recv_Bchannel(&ch->bch, 0);
+ if (ch->is->cmsb & SART_NMD)
+ deliver_status(ch, HW_MOD_NOCARR);
+ break;
+ }
+ if (ch->cmd != PCTRL_CMD_FRH) {
+ pr_debug("%s: isar_rcv_frame: unknown fax mode %x\n",
+ ch->is->name, ch->cmd);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ if (ch->bch.rx_skb)
+ skb_trim(ch->bch.rx_skb, 0);
+ break;
+ }
+ /* PCTRL_CMD_FRH */
+ if ((ch->bch.rx_skb->len + ch->is->clsb) >
+ (ch->bch.maxlen + 2)) {
+ pr_info("%s: %s incoming packet too large\n",
+ ch->is->name, __func__);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ skb_trim(ch->bch.rx_skb, 0);
+ break;
+ } else if (ch->is->cmsb & HDLC_ERROR) {
+ pr_info("%s: ISAR frame error %x len %d\n",
+ ch->is->name, ch->is->cmsb, ch->is->clsb);
+ skb_trim(ch->bch.rx_skb, 0);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ }
+ if (ch->is->cmsb & HDLC_FSD)
+ skb_trim(ch->bch.rx_skb, 0);
+ ptr = skb_put(ch->bch.rx_skb, ch->is->clsb);
+ rcv_mbox(ch->is, ptr);
+ if (ch->is->cmsb & HDLC_FED) {
+ if (ch->bch.rx_skb->len < 3) { /* last 2 are the FCS */
+ pr_info("%s: ISAR frame to short %d\n",
+ ch->is->name, ch->bch.rx_skb->len);
+ skb_trim(ch->bch.rx_skb, 0);
+ break;
+ }
+ skb_trim(ch->bch.rx_skb, ch->bch.rx_skb->len - 2);
+ recv_Bchannel(&ch->bch, 0);
+ }
+ if (ch->is->cmsb & SART_NMD) { /* ABORT */
+ pr_debug("%s: isar_rcv_frame: no more data\n",
+ ch->is->name);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ if (ch->bch.rx_skb)
+ skb_trim(ch->bch.rx_skb, 0);
+ send_mbox(ch->is, SET_DPS(ch->dpath) |
+ ISAR_HIS_PUMPCTRL, PCTRL_CMD_ESC, 0, NULL);
+ ch->state = STFAX_ESCAPE;
+ deliver_status(ch, HW_MOD_NOCARR);
+ }
+ break;
+ default:
+ pr_info("isar_rcv_frame protocol (%x)error\n", ch->bch.state);
+ ch->is->write_reg(ch->is->hw, ISAR_IIA, 0);
+ break;
+ }
+}
+
+static void
+isar_fill_fifo(struct isar_ch *ch)
+{
+ int count;
+ u8 msb;
+ u8 *ptr;
+
+ pr_debug("%s: ch%d tx_skb %p tx_idx %d\n",
+ ch->is->name, ch->bch.nr, ch->bch.tx_skb, ch->bch.tx_idx);
+ if (!ch->bch.tx_skb)
+ return;
+ count = ch->bch.tx_skb->len - ch->bch.tx_idx;
+ if (count <= 0)
+ return;
+ if (!(ch->is->bstat &
+ (ch->dpath == 1 ? BSTAT_RDM1 : BSTAT_RDM2)))
+ return;
+ if (count > ch->mml) {
+ msb = 0;
+ count = ch->mml;
+ } else {
+ msb = HDLC_FED;
+ }
+ ptr = ch->bch.tx_skb->data + ch->bch.tx_idx;
+ if (!ch->bch.tx_idx) {
+ pr_debug("%s: frame start\n", ch->is->name);
+ if ((ch->bch.state == ISDN_P_B_T30_FAX) &&
+ (ch->cmd == PCTRL_CMD_FTH)) {
+ if (count > 1) {
+ if ((ptr[0] == 0xff) && (ptr[1] == 0x13)) {
+ /* last frame */
+ test_and_set_bit(FLG_LASTDATA,
+ &ch->bch.Flags);
+ pr_debug("%s: set LASTDATA\n",
+ ch->is->name);
+ if (msb == HDLC_FED)
+ test_and_set_bit(FLG_DLEETX,
+ &ch->bch.Flags);
+ }
+ }
+ }
+ msb |= HDLC_FST;
+ }
+ ch->bch.tx_idx += count;
+ switch (ch->bch.state) {
+ case ISDN_P_NONE:
+ pr_info("%s: wrong protocol 0\n", __func__);
+ break;
+ case ISDN_P_B_RAW:
+ case ISDN_P_B_L2DTMF:
+ case ISDN_P_B_MODEM_ASYNC:
+ send_mbox(ch->is, SET_DPS(ch->dpath) | ISAR_HIS_SDATA,
+ 0, count, ptr);
+ break;
+ case ISDN_P_B_HDLC:
+ send_mbox(ch->is, SET_DPS(ch->dpath) | ISAR_HIS_SDATA,
+ msb, count, ptr);
+ break;
+ case ISDN_P_B_T30_FAX:
+ if (ch->state != STFAX_ACTIV)
+ pr_debug("%s: not ACTIV\n", ch->is->name);
+ else if (ch->cmd == PCTRL_CMD_FTH)
+ send_mbox(ch->is, SET_DPS(ch->dpath) | ISAR_HIS_SDATA,
+ msb, count, ptr);
+ else if (ch->cmd == PCTRL_CMD_FTM)
+ send_mbox(ch->is, SET_DPS(ch->dpath) | ISAR_HIS_SDATA,
+ 0, count, ptr);
+ else
+ pr_debug("%s: not FTH/FTM\n", ch->is->name);
+ break;
+ default:
+ pr_info("%s: protocol(%x) error\n",
+ __func__, ch->bch.state);
+ break;
+ }
+}
+
+static inline struct isar_ch *
+sel_bch_isar(struct isar_hw *isar, u8 dpath)
+{
+ struct isar_ch *base = &isar->ch[0];
+
+ if ((!dpath) || (dpath > 2))
+ return NULL;
+ if (base->dpath == dpath)
+ return base;
+ base++;
+ if (base->dpath == dpath)
+ return base;
+ return NULL;
+}
+
+static void
+send_next(struct isar_ch *ch)
+{
+ pr_debug("%s: %s ch%d tx_skb %p tx_idx %d\n",
+ ch->is->name, __func__, ch->bch.nr,
+ ch->bch.tx_skb, ch->bch.tx_idx);
+ if (ch->bch.state == ISDN_P_B_T30_FAX) {
+ if (ch->cmd == PCTRL_CMD_FTH) {
+ if (test_bit(FLG_LASTDATA, &ch->bch.Flags)) {
+ pr_debug("set NMD_DATA\n");
+ test_and_set_bit(FLG_NMD_DATA, &ch->bch.Flags);
+ }
+ } else if (ch->cmd == PCTRL_CMD_FTM) {
+ if (test_bit(FLG_DLEETX, &ch->bch.Flags)) {
+ test_and_set_bit(FLG_LASTDATA, &ch->bch.Flags);
+ test_and_set_bit(FLG_NMD_DATA, &ch->bch.Flags);
+ }
+ }
+ }
+ if (ch->bch.tx_skb) {
+ /* send confirm, on trans, free on hdlc. */
+ if (test_bit(FLG_TRANSPARENT, &ch->bch.Flags))
+ confirm_Bsend(&ch->bch);
+ dev_kfree_skb(ch->bch.tx_skb);
+ }
+ if (get_next_bframe(&ch->bch))
+ isar_fill_fifo(ch);
+ else {
+ if (test_and_clear_bit(FLG_DLEETX, &ch->bch.Flags)) {
+ if (test_and_clear_bit(FLG_LASTDATA,
+ &ch->bch.Flags)) {
+ if (test_and_clear_bit(FLG_NMD_DATA,
+ &ch->bch.Flags)) {
+ u8 zd = 0;
+ send_mbox(ch->is, SET_DPS(ch->dpath) |
+ ISAR_HIS_SDATA, 0x01, 1, &zd);
+ }
+ test_and_set_bit(FLG_LL_OK, &ch->bch.Flags);
+ } else {
+ deliver_status(ch, HW_MOD_CONNECT);
+ }
+ }
+ }
+}
+
+static void
+check_send(struct isar_hw *isar, u8 rdm)
+{
+ struct isar_ch *ch;
+
+ pr_debug("%s: rdm %x\n", isar->name, rdm);
+ if (rdm & BSTAT_RDM1) {
+ ch = sel_bch_isar(isar, 1);
+ if (ch && test_bit(FLG_ACTIVE, &ch->bch.Flags)) {
+ if (ch->bch.tx_skb && (ch->bch.tx_skb->len >
+ ch->bch.tx_idx))
+ isar_fill_fifo(ch);
+ else
+ send_next(ch);
+ }
+ }
+ if (rdm & BSTAT_RDM2) {
+ ch = sel_bch_isar(isar, 2);
+ if (ch && test_bit(FLG_ACTIVE, &ch->bch.Flags)) {
+ if (ch->bch.tx_skb && (ch->bch.tx_skb->len >
+ ch->bch.tx_idx))
+ isar_fill_fifo(ch);
+ else
+ send_next(ch);
+ }
+ }
+}
+
+const char *dmril[] = {"NO SPEED", "1200/75", "NODEF2", "75/1200", "NODEF4",
+ "300", "600", "1200", "2400", "4800", "7200",
+ "9600nt", "9600t", "12000", "14400", "WRONG"};
+const char *dmrim[] = {"NO MOD", "NO DEF", "V32/V32b", "V22", "V21",
+ "Bell103", "V23", "Bell202", "V17", "V29", "V27ter"};
+
+static void
+isar_pump_status_rsp(struct isar_ch *ch) {
+ u8 ril = ch->is->buf[0];
+ u8 rim;
+
+ if (!test_and_clear_bit(ISAR_RATE_REQ, &ch->is->Flags))
+ return;
+ if (ril > 14) {
+ pr_info("%s: wrong pstrsp ril=%d\n", ch->is->name, ril);
+ ril = 15;
+ }
+ switch (ch->is->buf[1]) {
+ case 0:
+ rim = 0;
+ break;
+ case 0x20:
+ rim = 2;
+ break;
+ case 0x40:
+ rim = 3;
+ break;
+ case 0x41:
+ rim = 4;
+ break;
+ case 0x51:
+ rim = 5;
+ break;
+ case 0x61:
+ rim = 6;
+ break;
+ case 0x71:
+ rim = 7;
+ break;
+ case 0x82:
+ rim = 8;
+ break;
+ case 0x92:
+ rim = 9;
+ break;
+ case 0xa2:
+ rim = 10;
+ break;
+ default:
+ rim = 1;
+ break;
+ }
+ sprintf(ch->conmsg, "%s %s", dmril[ril], dmrim[rim]);
+ pr_debug("%s: pump strsp %s\n", ch->is->name, ch->conmsg);
+}
+
+static void
+isar_pump_statev_modem(struct isar_ch *ch, u8 devt) {
+ u8 dps = SET_DPS(ch->dpath);
+
+ switch (devt) {
+ case PSEV_10MS_TIMER:
+ pr_debug("%s: pump stev TIMER\n", ch->is->name);
+ break;
+ case PSEV_CON_ON:
+ pr_debug("%s: pump stev CONNECT\n", ch->is->name);
+ deliver_status(ch, HW_MOD_CONNECT);
+ break;
+ case PSEV_CON_OFF:
+ pr_debug("%s: pump stev NO CONNECT\n", ch->is->name);
+ send_mbox(ch->is, dps | ISAR_HIS_PSTREQ, 0, 0, NULL);
+ deliver_status(ch, HW_MOD_NOCARR);
+ break;
+ case PSEV_V24_OFF:
+ pr_debug("%s: pump stev V24 OFF\n", ch->is->name);
+ break;
+ case PSEV_CTS_ON:
+ pr_debug("%s: pump stev CTS ON\n", ch->is->name);
+ break;
+ case PSEV_CTS_OFF:
+ pr_debug("%s pump stev CTS OFF\n", ch->is->name);
+ break;
+ case PSEV_DCD_ON:
+ pr_debug("%s: pump stev CARRIER ON\n", ch->is->name);
+ test_and_set_bit(ISAR_RATE_REQ, &ch->is->Flags);
+ send_mbox(ch->is, dps | ISAR_HIS_PSTREQ, 0, 0, NULL);
+ break;
+ case PSEV_DCD_OFF:
+ pr_debug("%s: pump stev CARRIER OFF\n", ch->is->name);
+ break;
+ case PSEV_DSR_ON:
+ pr_debug("%s: pump stev DSR ON\n", ch->is->name);
+ break;
+ case PSEV_DSR_OFF:
+ pr_debug("%s: pump stev DSR_OFF\n", ch->is->name);
+ break;
+ case PSEV_REM_RET:
+ pr_debug("%s: pump stev REMOTE RETRAIN\n", ch->is->name);
+ break;
+ case PSEV_REM_REN:
+ pr_debug("%s: pump stev REMOTE RENEGOTIATE\n", ch->is->name);
+ break;
+ case PSEV_GSTN_CLR:
+ pr_debug("%s: pump stev GSTN CLEAR\n", ch->is->name);
+ break;
+ default:
+ pr_info("u%s: nknown pump stev %x\n", ch->is->name, devt);
+ break;
+ }
+}
+
+static void
+isar_pump_statev_fax(struct isar_ch *ch, u8 devt) {
+ u8 dps = SET_DPS(ch->dpath);
+ u8 p1;
+
+ switch (devt) {
+ case PSEV_10MS_TIMER:
+ pr_debug("%s: pump stev TIMER\n", ch->is->name);
+ break;
+ case PSEV_RSP_READY:
+ pr_debug("%s: pump stev RSP_READY\n", ch->is->name);
+ ch->state = STFAX_READY;
+ deliver_status(ch, HW_MOD_READY);
+#ifdef AUTOCON
+ if (test_bit(BC_FLG_ORIG, &ch->bch.Flags))
+ isar_pump_cmd(bch, HW_MOD_FRH, 3);
+ else
+ isar_pump_cmd(bch, HW_MOD_FTH, 3);
+#endif
+ break;
+ case PSEV_LINE_TX_H:
+ if (ch->state == STFAX_LINE) {
+ pr_debug("%s: pump stev LINE_TX_H\n", ch->is->name);
+ ch->state = STFAX_CONT;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ PCTRL_CMD_CONT, 0, NULL);
+ } else {
+ pr_debug("%s: pump stev LINE_TX_H wrong st %x\n",
+ ch->is->name, ch->state);
+ }
+ break;
+ case PSEV_LINE_RX_H:
+ if (ch->state == STFAX_LINE) {
+ pr_debug("%s: pump stev LINE_RX_H\n", ch->is->name);
+ ch->state = STFAX_CONT;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ PCTRL_CMD_CONT, 0, NULL);
+ } else {
+ pr_debug("%s: pump stev LINE_RX_H wrong st %x\n",
+ ch->is->name, ch->state);
+ }
+ break;
+ case PSEV_LINE_TX_B:
+ if (ch->state == STFAX_LINE) {
+ pr_debug("%s: pump stev LINE_TX_B\n", ch->is->name);
+ ch->state = STFAX_CONT;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ PCTRL_CMD_CONT, 0, NULL);
+ } else {
+ pr_debug("%s: pump stev LINE_TX_B wrong st %x\n",
+ ch->is->name, ch->state);
+ }
+ break;
+ case PSEV_LINE_RX_B:
+ if (ch->state == STFAX_LINE) {
+ pr_debug("%s: pump stev LINE_RX_B\n", ch->is->name);
+ ch->state = STFAX_CONT;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ PCTRL_CMD_CONT, 0, NULL);
+ } else {
+ pr_debug("%s: pump stev LINE_RX_B wrong st %x\n",
+ ch->is->name, ch->state);
+ }
+ break;
+ case PSEV_RSP_CONN:
+ if (ch->state == STFAX_CONT) {
+ pr_debug("%s: pump stev RSP_CONN\n", ch->is->name);
+ ch->state = STFAX_ACTIV;
+ test_and_set_bit(ISAR_RATE_REQ, &ch->is->Flags);
+ send_mbox(ch->is, dps | ISAR_HIS_PSTREQ, 0, 0, NULL);
+ if (ch->cmd == PCTRL_CMD_FTH) {
+ int delay = (ch->mod == 3) ? 1000 : 200;
+ /* 1s (200 ms) Flags before data */
+ if (test_and_set_bit(FLG_FTI_RUN,
+ &ch->bch.Flags))
+ del_timer(&ch->ftimer);
+ ch->ftimer.expires =
+ jiffies + ((delay * HZ)/1000);
+ test_and_set_bit(FLG_LL_CONN,
+ &ch->bch.Flags);
+ add_timer(&ch->ftimer);
+ } else {
+ deliver_status(ch, HW_MOD_CONNECT);
+ }
+ } else {
+ pr_debug("%s: pump stev RSP_CONN wrong st %x\n",
+ ch->is->name, ch->state);
+ }
+ break;
+ case PSEV_FLAGS_DET:
+ pr_debug("%s: pump stev FLAGS_DET\n", ch->is->name);
+ break;
+ case PSEV_RSP_DISC:
+ pr_debug("%s: pump stev RSP_DISC state(%d)\n",
+ ch->is->name, ch->state);
+ if (ch->state == STFAX_ESCAPE) {
+ p1 = 5;
+ switch (ch->newcmd) {
+ case 0:
+ ch->state = STFAX_READY;
+ break;
+ case PCTRL_CMD_FTM:
+ p1 = 2;
+ case PCTRL_CMD_FTH:
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ PCTRL_CMD_SILON, 1, &p1);
+ ch->state = STFAX_SILDET;
+ break;
+ case PCTRL_CMD_FRH:
+ case PCTRL_CMD_FRM:
+ ch->mod = ch->newmod;
+ p1 = ch->newmod;
+ ch->newmod = 0;
+ ch->cmd = ch->newcmd;
+ ch->newcmd = 0;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ ch->cmd, 1, &p1);
+ ch->state = STFAX_LINE;
+ ch->try_mod = 3;
+ break;
+ default:
+ pr_debug("%s: RSP_DISC unknown newcmd %x\n",
+ ch->is->name, ch->newcmd);
+ break;
+ }
+ } else if (ch->state == STFAX_ACTIV) {
+ if (test_and_clear_bit(FLG_LL_OK, &ch->bch.Flags))
+ deliver_status(ch, HW_MOD_OK);
+ else if (ch->cmd == PCTRL_CMD_FRM)
+ deliver_status(ch, HW_MOD_NOCARR);
+ else
+ deliver_status(ch, HW_MOD_FCERROR);
+ ch->state = STFAX_READY;
+ } else if (ch->state != STFAX_SILDET) {
+ /* ignore in STFAX_SILDET */
+ ch->state = STFAX_READY;
+ deliver_status(ch, HW_MOD_FCERROR);
+ }
+ break;
+ case PSEV_RSP_SILDET:
+ pr_debug("%s: pump stev RSP_SILDET\n", ch->is->name);
+ if (ch->state == STFAX_SILDET) {
+ ch->mod = ch->newmod;
+ p1 = ch->newmod;
+ ch->newmod = 0;
+ ch->cmd = ch->newcmd;
+ ch->newcmd = 0;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ ch->cmd, 1, &p1);
+ ch->state = STFAX_LINE;
+ ch->try_mod = 3;
+ }
+ break;
+ case PSEV_RSP_SILOFF:
+ pr_debug("%s: pump stev RSP_SILOFF\n", ch->is->name);
+ break;
+ case PSEV_RSP_FCERR:
+ if (ch->state == STFAX_LINE) {
+ pr_debug("%s: pump stev RSP_FCERR try %d\n",
+ ch->is->name, ch->try_mod);
+ if (ch->try_mod--) {
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
+ ch->cmd, 1, &ch->mod);
+ break;
+ }
+ }
+ pr_debug("%s: pump stev RSP_FCERR\n", ch->is->name);
+ ch->state = STFAX_ESCAPE;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL, PCTRL_CMD_ESC,
+ 0, NULL);
+ deliver_status(ch, HW_MOD_FCERROR);
+ break;
+ default:
+ break;
+ }
+}
+
+void
+mISDNisar_irq(struct isar_hw *isar)
+{
+ struct isar_ch *ch;
+
+ get_irq_infos(isar);
+ switch (isar->iis & ISAR_IIS_MSCMSD) {
+ case ISAR_IIS_RDATA:
+ ch = sel_bch_isar(isar, isar->iis >> 6);
+ if (ch)
+ isar_rcv_frame(ch);
+ else {
+ pr_debug("%s: ISAR spurious IIS_RDATA %x/%x/%x\n",
+ isar->name, isar->iis, isar->cmsb,
+ isar->clsb);
+ isar->write_reg(isar->hw, ISAR_IIA, 0);
+ }
+ break;
+ case ISAR_IIS_GSTEV:
+ isar->write_reg(isar->hw, ISAR_IIA, 0);
+ isar->bstat |= isar->cmsb;
+ check_send(isar, isar->cmsb);
+ break;
+ case ISAR_IIS_BSTEV:
+#ifdef ERROR_STATISTIC
+ ch = sel_bch_isar(isar, isar->iis >> 6);
+ if (ch) {
+ if (isar->cmsb == BSTEV_TBO)
+ ch->bch.err_tx++;
+ if (isar->cmsb == BSTEV_RBO)
+ ch->bch.err_rdo++;
+ }
+#endif
+ pr_debug("%s: Buffer STEV dpath%d msb(%x)\n",
+ isar->name, isar->iis>>6, isar->cmsb);
+ isar->write_reg(isar->hw, ISAR_IIA, 0);
+ break;
+ case ISAR_IIS_PSTEV:
+ ch = sel_bch_isar(isar, isar->iis >> 6);
+ if (ch) {
+ rcv_mbox(isar, NULL);
+ if (ch->bch.state == ISDN_P_B_MODEM_ASYNC)
+ isar_pump_statev_modem(ch, isar->cmsb);
+ else if (ch->bch.state == ISDN_P_B_T30_FAX)
+ isar_pump_statev_fax(ch, isar->cmsb);
+ else if (ch->bch.state == ISDN_P_B_RAW) {
+ int tt;
+ tt = isar->cmsb | 0x30;
+ if (tt == 0x3e)
+ tt = '*';
+ else if (tt == 0x3f)
+ tt = '#';
+ else if (tt > '9')
+ tt += 7;
+ tt |= DTMF_TONE_VAL;
+ _queue_data(&ch->bch.ch, PH_CONTROL_IND,
+ MISDN_ID_ANY, sizeof(tt), &tt,
+ GFP_ATOMIC);
+ } else
+ pr_debug("%s: ISAR IIS_PSTEV pm %d sta %x\n",
+ isar->name, ch->bch.state,
+ isar->cmsb);
+ } else {
+ pr_debug("%s: ISAR spurious IIS_PSTEV %x/%x/%x\n",
+ isar->name, isar->iis, isar->cmsb,
+ isar->clsb);
+ isar->write_reg(isar->hw, ISAR_IIA, 0);
+ }
+ break;
+ case ISAR_IIS_PSTRSP:
+ ch = sel_bch_isar(isar, isar->iis >> 6);
+ if (ch) {
+ rcv_mbox(isar, NULL);
+ isar_pump_status_rsp(ch);
+ } else {
+ pr_debug("%s: ISAR spurious IIS_PSTRSP %x/%x/%x\n",
+ isar->name, isar->iis, isar->cmsb,
+ isar->clsb);
+ isar->write_reg(isar->hw, ISAR_IIA, 0);
+ }
+ break;
+ case ISAR_IIS_DIAG:
+ case ISAR_IIS_BSTRSP:
+ case ISAR_IIS_IOM2RSP:
+ rcv_mbox(isar, NULL);
+ break;
+ case ISAR_IIS_INVMSG:
+ rcv_mbox(isar, NULL);
+ pr_debug("%s: invalid msg his:%x\n", isar->name, isar->cmsb);
+ break;
+ default:
+ rcv_mbox(isar, NULL);
+ pr_debug("%s: unhandled msg iis(%x) ctrl(%x/%x)\n",
+ isar->name, isar->iis, isar->cmsb, isar->clsb);
+ break;
+ }
+}
+EXPORT_SYMBOL(mISDNisar_irq);
+
+static void
+ftimer_handler(unsigned long data)
+{
+ struct isar_ch *ch = (struct isar_ch *)data;
+
+ pr_debug("%s: ftimer flags %lx\n", ch->is->name, ch->bch.Flags);
+ test_and_clear_bit(FLG_FTI_RUN, &ch->bch.Flags);
+ if (test_and_clear_bit(FLG_LL_CONN, &ch->bch.Flags))
+ deliver_status(ch, HW_MOD_CONNECT);
+}
+
+static void
+setup_pump(struct isar_ch *ch) {
+ u8 dps = SET_DPS(ch->dpath);
+ u8 ctrl, param[6];
+
+ switch (ch->bch.state) {
+ case ISDN_P_NONE:
+ case ISDN_P_B_RAW:
+ case ISDN_P_B_HDLC:
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCFG, PMOD_BYPASS, 0, NULL);
+ break;
+ case ISDN_P_B_L2DTMF:
+ if (test_bit(FLG_DTMFSEND, &ch->bch.Flags)) {
+ param[0] = 5; /* TOA 5 db */
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCFG,
+ PMOD_DTMF_TRANS, 1, param);
+ } else {
+ param[0] = 40; /* REL -46 dbm */
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCFG,
+ PMOD_DTMF, 1, param);
+ }
+ case ISDN_P_B_MODEM_ASYNC:
+ ctrl = PMOD_DATAMODEM;
+ if (test_bit(FLG_ORIGIN, &ch->bch.Flags)) {
+ ctrl |= PCTRL_ORIG;
+ param[5] = PV32P6_CTN;
+ } else {
+ param[5] = PV32P6_ATN;
+ }
+ param[0] = 6; /* 6 db */
+ param[1] = PV32P2_V23R | PV32P2_V22A | PV32P2_V22B |
+ PV32P2_V22C | PV32P2_V21 | PV32P2_BEL;
+ param[2] = PV32P3_AMOD | PV32P3_V32B | PV32P3_V23B;
+ param[3] = PV32P4_UT144;
+ param[4] = PV32P5_UT144;
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCFG, ctrl, 6, param);
+ break;
+ case ISDN_P_B_T30_FAX:
+ ctrl = PMOD_FAX;
+ if (test_bit(FLG_ORIGIN, &ch->bch.Flags)) {
+ ctrl |= PCTRL_ORIG;
+ param[1] = PFAXP2_CTN;
+ } else {
+ param[1] = PFAXP2_ATN;
+ }
+ param[0] = 6; /* 6 db */
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCFG, ctrl, 2, param);
+ ch->state = STFAX_NULL;
+ ch->newcmd = 0;
+ ch->newmod = 0;
+ test_and_set_bit(FLG_FTI_RUN, &ch->bch.Flags);
+ break;
+ }
+ udelay(1000);
+ send_mbox(ch->is, dps | ISAR_HIS_PSTREQ, 0, 0, NULL);
+ udelay(1000);
+}
+
+static void
+setup_sart(struct isar_ch *ch) {
+ u8 dps = SET_DPS(ch->dpath);
+ u8 ctrl, param[2] = {0, 0};
+
+ switch (ch->bch.state) {
+ case ISDN_P_NONE:
+ send_mbox(ch->is, dps | ISAR_HIS_SARTCFG, SMODE_DISABLE,
+ 0, NULL);
+ break;
+ case ISDN_P_B_RAW:
+ case ISDN_P_B_L2DTMF:
+ send_mbox(ch->is, dps | ISAR_HIS_SARTCFG, SMODE_BINARY,
+ 2, param);
+ break;
+ case ISDN_P_B_HDLC:
+ case ISDN_P_B_T30_FAX:
+ send_mbox(ch->is, dps | ISAR_HIS_SARTCFG, SMODE_HDLC,
+ 1, param);
+ break;
+ case ISDN_P_B_MODEM_ASYNC:
+ ctrl = SMODE_V14 | SCTRL_HDMC_BOTH;
+ param[0] = S_P1_CHS_8;
+ param[1] = S_P2_BFT_DEF;
+ send_mbox(ch->is, dps | ISAR_HIS_SARTCFG, ctrl, 2, param);
+ break;
+ }
+ udelay(1000);
+ send_mbox(ch->is, dps | ISAR_HIS_BSTREQ, 0, 0, NULL);
+ udelay(1000);
+}
+
+static void
+setup_iom2(struct isar_ch *ch) {
+ u8 dps = SET_DPS(ch->dpath);
+ u8 cmsb = IOM_CTRL_ENA, msg[5] = {IOM_P1_TXD, 0, 0, 0, 0};
+
+ if (ch->bch.nr == 2) {
+ msg[1] = 1;
+ msg[3] = 1;
+ }
+ switch (ch->bch.state) {
+ case ISDN_P_NONE:
+ cmsb = 0;
+ /* dummy slot */
+ msg[1] = ch->dpath + 2;
+ msg[3] = ch->dpath + 2;
+ break;
+ case ISDN_P_B_RAW:
+ case ISDN_P_B_HDLC:
+ break;
+ case ISDN_P_B_MODEM_ASYNC:
+ case ISDN_P_B_T30_FAX:
+ cmsb |= IOM_CTRL_RCV;
+ case ISDN_P_B_L2DTMF:
+ if (test_bit(FLG_DTMFSEND, &ch->bch.Flags))
+ cmsb |= IOM_CTRL_RCV;
+ cmsb |= IOM_CTRL_ALAW;
+ break;
+ }
+ send_mbox(ch->is, dps | ISAR_HIS_IOM2CFG, cmsb, 5, msg);
+ udelay(1000);
+ send_mbox(ch->is, dps | ISAR_HIS_IOM2REQ, 0, 0, NULL);
+ udelay(1000);
+}
+
+static int
+modeisar(struct isar_ch *ch, u32 bprotocol)
+{
+ /* Here we are selecting the best datapath for requested protocol */
+ if (ch->bch.state == ISDN_P_NONE) { /* New Setup */
+ switch (bprotocol) {
+ case ISDN_P_NONE: /* init */
+ if (!ch->dpath)
+ /* no init for dpath 0 */
+ return 0;
+ test_and_clear_bit(FLG_HDLC, &ch->bch.Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &ch->bch.Flags);
+ break;
+ case ISDN_P_B_RAW:
+ case ISDN_P_B_HDLC:
+ /* best is datapath 2 */
+ if (!test_and_set_bit(ISAR_DP2_USE, &ch->is->Flags))
+ ch->dpath = 2;
+ else if (!test_and_set_bit(ISAR_DP1_USE,
+ &ch->is->Flags))
+ ch->dpath = 1;
+ else {
+ pr_info("modeisar both pathes in use\n");
+ return -EBUSY;
+ }
+ if (bprotocol == ISDN_P_B_HDLC)
+ test_and_set_bit(FLG_HDLC, &ch->bch.Flags);
+ else
+ test_and_set_bit(FLG_TRANSPARENT,
+ &ch->bch.Flags);
+ break;
+ case ISDN_P_B_MODEM_ASYNC:
+ case ISDN_P_B_T30_FAX:
+ case ISDN_P_B_L2DTMF:
+ /* only datapath 1 */
+ if (!test_and_set_bit(ISAR_DP1_USE, &ch->is->Flags))
+ ch->dpath = 1;
+ else {
+ pr_info("%s: ISAR modeisar analog functions"
+ "only with DP1\n", ch->is->name);
+ return -EBUSY;
+ }
+ break;
+ default:
+ pr_info("%s: protocol not known %x\n", ch->is->name,
+ bprotocol);
+ return -ENOPROTOOPT;
+ }
+ }
+ pr_debug("%s: ISAR ch%d dp%d protocol %x->%x\n", ch->is->name,
+ ch->bch.nr, ch->dpath, ch->bch.state, bprotocol);
+ ch->bch.state = bprotocol;
+ setup_pump(ch);
+ setup_iom2(ch);
+ setup_sart(ch);
+ if (ch->bch.state == ISDN_P_NONE) {
+ /* Clear resources */
+ if (ch->dpath == 1)
+ test_and_clear_bit(ISAR_DP1_USE, &ch->is->Flags);
+ else if (ch->dpath == 2)
+ test_and_clear_bit(ISAR_DP2_USE, &ch->is->Flags);
+ ch->dpath = 0;
+ ch->is->ctrl(ch->is->hw, HW_DEACT_IND, ch->bch.nr);
+ } else
+ ch->is->ctrl(ch->is->hw, HW_ACTIVATE_IND, ch->bch.nr);
+ return 0;
+}
+
+static void
+isar_pump_cmd(struct isar_ch *ch, u32 cmd, u8 para)
+{
+ u8 dps = SET_DPS(ch->dpath);
+ u8 ctrl = 0, nom = 0, p1 = 0;
+
+ pr_debug("%s: isar_pump_cmd %x/%x state(%x)\n",
+ ch->is->name, cmd, para, ch->bch.state);
+ switch (cmd) {
+ case HW_MOD_FTM:
+ if (ch->state == STFAX_READY) {
+ p1 = para;
+ ctrl = PCTRL_CMD_FTM;
+ nom = 1;
+ ch->state = STFAX_LINE;
+ ch->cmd = ctrl;
+ ch->mod = para;
+ ch->newmod = 0;
+ ch->newcmd = 0;
+ ch->try_mod = 3;
+ } else if ((ch->state == STFAX_ACTIV) &&
+ (ch->cmd == PCTRL_CMD_FTM) && (ch->mod == para))
+ deliver_status(ch, HW_MOD_CONNECT);
+ else {
+ ch->newmod = para;
+ ch->newcmd = PCTRL_CMD_FTM;
+ nom = 0;
+ ctrl = PCTRL_CMD_ESC;
+ ch->state = STFAX_ESCAPE;
+ }
+ break;
+ case HW_MOD_FTH:
+ if (ch->state == STFAX_READY) {
+ p1 = para;
+ ctrl = PCTRL_CMD_FTH;
+ nom = 1;
+ ch->state = STFAX_LINE;
+ ch->cmd = ctrl;
+ ch->mod = para;
+ ch->newmod = 0;
+ ch->newcmd = 0;
+ ch->try_mod = 3;
+ } else if ((ch->state == STFAX_ACTIV) &&
+ (ch->cmd == PCTRL_CMD_FTH) && (ch->mod == para))
+ deliver_status(ch, HW_MOD_CONNECT);
+ else {
+ ch->newmod = para;
+ ch->newcmd = PCTRL_CMD_FTH;
+ nom = 0;
+ ctrl = PCTRL_CMD_ESC;
+ ch->state = STFAX_ESCAPE;
+ }
+ break;
+ case HW_MOD_FRM:
+ if (ch->state == STFAX_READY) {
+ p1 = para;
+ ctrl = PCTRL_CMD_FRM;
+ nom = 1;
+ ch->state = STFAX_LINE;
+ ch->cmd = ctrl;
+ ch->mod = para;
+ ch->newmod = 0;
+ ch->newcmd = 0;
+ ch->try_mod = 3;
+ } else if ((ch->state == STFAX_ACTIV) &&
+ (ch->cmd == PCTRL_CMD_FRM) && (ch->mod == para))
+ deliver_status(ch, HW_MOD_CONNECT);
+ else {
+ ch->newmod = para;
+ ch->newcmd = PCTRL_CMD_FRM;
+ nom = 0;
+ ctrl = PCTRL_CMD_ESC;
+ ch->state = STFAX_ESCAPE;
+ }
+ break;
+ case HW_MOD_FRH:
+ if (ch->state == STFAX_READY) {
+ p1 = para;
+ ctrl = PCTRL_CMD_FRH;
+ nom = 1;
+ ch->state = STFAX_LINE;
+ ch->cmd = ctrl;
+ ch->mod = para;
+ ch->newmod = 0;
+ ch->newcmd = 0;
+ ch->try_mod = 3;
+ } else if ((ch->state == STFAX_ACTIV) &&
+ (ch->cmd == PCTRL_CMD_FRH) && (ch->mod == para))
+ deliver_status(ch, HW_MOD_CONNECT);
+ else {
+ ch->newmod = para;
+ ch->newcmd = PCTRL_CMD_FRH;
+ nom = 0;
+ ctrl = PCTRL_CMD_ESC;
+ ch->state = STFAX_ESCAPE;
+ }
+ break;
+ case PCTRL_CMD_TDTMF:
+ p1 = para;
+ nom = 1;
+ ctrl = PCTRL_CMD_TDTMF;
+ break;
+ }
+ if (ctrl)
+ send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL, ctrl, nom, &p1);
+}
+
+static void
+isar_setup(struct isar_hw *isar)
+{
+ u8 msg;
+ int i;
+
+ /* Dpath 1, 2 */
+ msg = 61;
+ for (i = 0; i < 2; i++) {
+ /* Buffer Config */
+ send_mbox(isar, (i ? ISAR_HIS_DPS2 : ISAR_HIS_DPS1) |
+ ISAR_HIS_P12CFG, 4, 1, &msg);
+ isar->ch[i].mml = msg;
+ isar->ch[i].bch.state = 0;
+ isar->ch[i].dpath = i + 1;
+ modeisar(&isar->ch[i], ISDN_P_NONE);
+ }
+}
+
+static int
+isar_l2l1(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct isar_ch *ich = container_of(bch, struct isar_ch, bch);
+ int ret = -EINVAL;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id, *val;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(ich->is->hwlock, flags);
+ ret = bchannel_senddata(bch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ ret = 0;
+ isar_fill_fifo(ich);
+ spin_unlock_irqrestore(ich->is->hwlock, flags);
+ if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(ich->is->hwlock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ spin_lock_irqsave(ich->is->hwlock, flags);
+ if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+ ret = modeisar(ich, ch->protocol);
+ else
+ ret = 0;
+ spin_unlock_irqrestore(ich->is->hwlock, flags);
+ if (!ret)
+ _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ break;
+ case PH_DEACTIVATE_REQ:
+ spin_lock_irqsave(ich->is->hwlock, flags);
+ mISDN_clear_bchannel(bch);
+ modeisar(ich, ISDN_P_NONE);
+ spin_unlock_irqrestore(ich->is->hwlock, flags);
+ _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ ret = 0;
+ break;
+ case PH_CONTROL_REQ:
+ val = (u32 *)skb->data;
+ pr_debug("%s: PH_CONTROL | REQUEST %x/%x\n", ich->is->name,
+ hh->id, *val);
+ if ((hh->id == 0) && ((*val & ~DTMF_TONE_MASK) ==
+ DTMF_TONE_VAL)) {
+ if (bch->state == ISDN_P_B_L2DTMF) {
+ char tt = *val & DTMF_TONE_MASK;
+
+ if (tt == '*')
+ tt = 0x1e;
+ else if (tt == '#')
+ tt = 0x1f;
+ else if (tt > '9')
+ tt -= 7;
+ tt &= 0x1f;
+ spin_lock_irqsave(ich->is->hwlock, flags);
+ isar_pump_cmd(ich, PCTRL_CMD_TDTMF, tt);
+ spin_unlock_irqrestore(ich->is->hwlock, flags);
+ } else {
+ pr_info("%s: DTMF send wrong protocol %x\n",
+ __func__, bch->state);
+ return -EINVAL;
+ }
+ } else if ((hh->id == HW_MOD_FRM) || (hh->id == HW_MOD_FRH) ||
+ (hh->id == HW_MOD_FTM) || (hh->id == HW_MOD_FTH)) {
+ for (id = 0; id < FAXMODCNT; id++)
+ if (faxmodulation[id] == *val)
+ break;
+ if ((FAXMODCNT > id) &&
+ test_bit(FLG_INITIALIZED, &bch->Flags)) {
+ pr_debug("%s: isar: new mod\n", ich->is->name);
+ isar_pump_cmd(ich, hh->id, *val);
+ ret = 0;
+ } else {
+ pr_info("%s: wrong modulation\n",
+ ich->is->name);
+ ret = -EINVAL;
+ }
+ } else if (hh->id == HW_MOD_LASTDATA)
+ test_and_set_bit(FLG_DLEETX, &bch->Flags);
+ else {
+ pr_info("%s: unknown PH_CONTROL_REQ %x\n",
+ ich->is->name, hh->id);
+ ret = -EINVAL;
+ }
+ default:
+ pr_info("%s: %s unknown prim(%x,%x)\n",
+ ich->is->name, __func__, hh->prim, hh->id);
+ ret = -EINVAL;
+ }
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = 0;
+ break;
+ /* Nothing implemented yet */
+ case MISDN_CTRL_FILL_EMPTY:
+ default:
+ pr_info("%s: unknown Op %x\n", __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+isar_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct isar_ch *ich = container_of(bch, struct isar_ch, bch);
+ int ret = -EINVAL;
+ u_long flags;
+
+ pr_debug("%s: %s cmd:%x %p\n", ich->is->name, __func__, cmd, arg);
+ switch (cmd) {
+ case CLOSE_CHANNEL:
+ test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ if (test_bit(FLG_ACTIVE, &bch->Flags)) {
+ spin_lock_irqsave(ich->is->hwlock, flags);
+ mISDN_freebchannel(bch);
+ modeisar(ich, ISDN_P_NONE);
+ spin_unlock_irqrestore(ich->is->hwlock, flags);
+ } else {
+ skb_queue_purge(&bch->rqueue);
+ bch->rcount = 0;
+ }
+ ch->protocol = ISDN_P_NONE;
+ ch->peer = NULL;
+ module_put(ich->is->owner);
+ ret = 0;
+ break;
+ case CONTROL_CHANNEL:
+ ret = channel_bctrl(bch, arg);
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x)\n",
+ ich->is->name, __func__, cmd);
+ }
+ return ret;
+}
+
+static void
+free_isar(struct isar_hw *isar)
+{
+ modeisar(&isar->ch[0], ISDN_P_NONE);
+ modeisar(&isar->ch[1], ISDN_P_NONE);
+ del_timer(&isar->ch[0].ftimer);
+ del_timer(&isar->ch[1].ftimer);
+ test_and_clear_bit(FLG_INITIALIZED, &isar->ch[0].bch.Flags);
+ test_and_clear_bit(FLG_INITIALIZED, &isar->ch[1].bch.Flags);
+}
+
+static int
+init_isar(struct isar_hw *isar)
+{
+ int cnt = 3;
+
+ while (cnt--) {
+ isar->version = ISARVersion(isar);
+ if (isar->ch[0].bch.debug & DEBUG_HW)
+ pr_notice("%s: Testing version %d (%d time)\n",
+ isar->name, isar->version, 3 - cnt);
+ if (isar->version == 1)
+ break;
+ isar->ctrl(isar->hw, HW_RESET_REQ, 0);
+ }
+ if (isar->version != 1)
+ return -EINVAL;
+ isar->ch[0].ftimer.function = &ftimer_handler;
+ isar->ch[0].ftimer.data = (long)&isar->ch[0];
+ init_timer(&isar->ch[0].ftimer);
+ test_and_set_bit(FLG_INITIALIZED, &isar->ch[0].bch.Flags);
+ isar->ch[1].ftimer.function = &ftimer_handler;
+ isar->ch[1].ftimer.data = (long)&isar->ch[1];
+ init_timer(&isar->ch[1].ftimer);
+ test_and_set_bit(FLG_INITIALIZED, &isar->ch[1].bch.Flags);
+ return 0;
+}
+
+static int
+isar_open(struct isar_hw *isar, struct channel_req *rq)
+{
+ struct bchannel *bch;
+
+ if (rq->adr.channel > 2)
+ return -EINVAL;
+ if (rq->protocol == ISDN_P_NONE)
+ return -EINVAL;
+ bch = &isar->ch[rq->adr.channel - 1].bch;
+ if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+ return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
+ bch->ch.protocol = rq->protocol;
+ rq->ch = &bch->ch;
+ return 0;
+}
+
+u32
+mISDNisar_init(struct isar_hw *isar, void *hw)
+{
+ u32 ret, i;
+
+ isar->hw = hw;
+ for (i = 0; i < 2; i++) {
+ isar->ch[i].bch.nr = i + 1;
+ mISDN_initbchannel(&isar->ch[i].bch, MAX_DATA_MEM);
+ isar->ch[i].bch.ch.nr = i + 1;
+ isar->ch[i].bch.ch.send = &isar_l2l1;
+ isar->ch[i].bch.ch.ctrl = isar_bctrl;
+ isar->ch[i].bch.hw = hw;
+ isar->ch[i].is = isar;
+ }
+
+ isar->init = &init_isar;
+ isar->release = &free_isar;
+ isar->firmware = &load_firmware;
+ isar->open = &isar_open;
+
+ ret = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_L2DTMF & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_MODEM_ASYNC & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_T30_FAX & ISDN_P_B_MASK));
+
+ return ret;
+}
+EXPORT_SYMBOL(mISDNisar_init);
+
+static int isar_mod_init(void)
+{
+ pr_notice("mISDN: ISAR driver Rev. %s\n", ISAR_REV);
+ return 0;
+}
+
+static void isar_mod_cleanup(void)
+{
+ pr_notice("mISDN: ISAR module unloaded\n");
+}
+module_init(isar_mod_init);
+module_exit(isar_mod_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
new file mode 100644
index 0000000..6c1b164
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -0,0 +1,1156 @@
+/*
+ * NETJet mISDN driver
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include "ipac.h"
+#include "iohelper.h"
+#include "netjet.h"
+#include <linux/isdn/hdlc.h>
+
+#define NETJET_REV "2.0"
+
+enum nj_types {
+ NETJET_S_TJ300,
+ NETJET_S_TJ320,
+ ENTERNOW__TJ320,
+};
+
+struct tiger_dma {
+ size_t size;
+ u32 *start;
+ int idx;
+ u32 dmastart;
+ u32 dmairq;
+ u32 dmaend;
+ u32 dmacur;
+};
+
+struct tiger_hw;
+
+struct tiger_ch {
+ struct bchannel bch;
+ struct tiger_hw *nj;
+ int idx;
+ int free;
+ int lastrx;
+ u16 rxstate;
+ u16 txstate;
+ struct isdnhdlc_vars hsend;
+ struct isdnhdlc_vars hrecv;
+ u8 *hsbuf;
+ u8 *hrbuf;
+};
+
+#define TX_INIT 0x0001
+#define TX_IDLE 0x0002
+#define TX_RUN 0x0004
+#define TX_UNDERRUN 0x0100
+#define RX_OVERRUN 0x0100
+
+#define LOG_SIZE 64
+
+struct tiger_hw {
+ struct list_head list;
+ struct pci_dev *pdev;
+ char name[MISDN_MAX_IDLEN];
+ enum nj_types typ;
+ int irq;
+ u32 irqcnt;
+ u32 base;
+ size_t base_s;
+ dma_addr_t dma;
+ void *dma_p;
+ spinlock_t lock; /* lock HW */
+ struct isac_hw isac;
+ struct tiger_dma send;
+ struct tiger_dma recv;
+ struct tiger_ch bc[2];
+ u8 ctrlreg;
+ u8 dmactrl;
+ u8 auxd;
+ u8 last_is0;
+ u8 irqmask0;
+ char log[LOG_SIZE];
+};
+
+static LIST_HEAD(Cards);
+static DEFINE_RWLOCK(card_lock); /* protect Cards */
+static u32 debug;
+static int nj_cnt;
+
+static void
+_set_debug(struct tiger_hw *card)
+{
+ card->isac.dch.debug = debug;
+ card->bc[0].bch.debug = debug;
+ card->bc[1].bch.debug = debug;
+}
+
+static int
+set_debug(const char *val, struct kernel_param *kp)
+{
+ int ret;
+ struct tiger_hw *card;
+
+ ret = param_set_uint(val, kp);
+ if (!ret) {
+ read_lock(&card_lock);
+ list_for_each_entry(card, &Cards, list)
+ _set_debug(card);
+ read_unlock(&card_lock);
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(NETJET_REV);
+module_param_call(debug, set_debug, param_get_uint, &debug, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Netjet debug mask");
+
+static void
+nj_disable_hwirq(struct tiger_hw *card)
+{
+ outb(0, card->base + NJ_IRQMASK0);
+ outb(0, card->base + NJ_IRQMASK1);
+}
+
+
+static u8
+ReadISAC_nj(void *p, u8 offset)
+{
+ struct tiger_hw *card = p;
+ u8 ret;
+
+ card->auxd &= 0xfc;
+ card->auxd |= (offset >> 4) & 3;
+ outb(card->auxd, card->base + NJ_AUXDATA);
+ ret = inb(card->base + NJ_ISAC_OFF + ((offset & 0x0f) << 2));
+ return ret;
+}
+
+static void
+WriteISAC_nj(void *p, u8 offset, u8 value)
+{
+ struct tiger_hw *card = p;
+
+ card->auxd &= 0xfc;
+ card->auxd |= (offset >> 4) & 3;
+ outb(card->auxd, card->base + NJ_AUXDATA);
+ outb(value, card->base + NJ_ISAC_OFF + ((offset & 0x0f) << 2));
+}
+
+static void
+ReadFiFoISAC_nj(void *p, u8 offset, u8 *data, int size)
+{
+ struct tiger_hw *card = p;
+
+ card->auxd &= 0xfc;
+ outb(card->auxd, card->base + NJ_AUXDATA);
+ insb(card->base + NJ_ISAC_OFF, data, size);
+}
+
+static void
+WriteFiFoISAC_nj(void *p, u8 offset, u8 *data, int size)
+{
+ struct tiger_hw *card = p;
+
+ card->auxd &= 0xfc;
+ outb(card->auxd, card->base + NJ_AUXDATA);
+ outsb(card->base + NJ_ISAC_OFF, data, size);
+}
+
+static void
+fill_mem(struct tiger_ch *bc, u32 idx, u32 cnt, u32 fill)
+{
+ struct tiger_hw *card = bc->bch.hw;
+ u32 mask = 0xff, val;
+
+ pr_debug("%s: B%1d fill %02x len %d idx %d/%d\n", card->name,
+ bc->bch.nr, fill, cnt, idx, card->send.idx);
+ if (bc->bch.nr & 2) {
+ fill <<= 8;
+ mask <<= 8;
+ }
+ mask ^= 0xffffffff;
+ while (cnt--) {
+ val = card->send.start[idx];
+ val &= mask;
+ val |= fill;
+ card->send.start[idx++] = val;
+ if (idx >= card->send.size)
+ idx = 0;
+ }
+}
+
+static int
+mode_tiger(struct tiger_ch *bc, u32 protocol)
+{
+ struct tiger_hw *card = bc->bch.hw;
+
+ pr_debug("%s: B%1d protocol %x-->%x\n", card->name,
+ bc->bch.nr, bc->bch.state, protocol);
+ switch (protocol) {
+ case ISDN_P_NONE:
+ if (bc->bch.state == ISDN_P_NONE)
+ break;
+ fill_mem(bc, 0, card->send.size, 0xff);
+ bc->bch.state = protocol;
+ /* only stop dma and interrupts if both channels NULL */
+ if ((card->bc[0].bch.state == ISDN_P_NONE) &&
+ (card->bc[1].bch.state == ISDN_P_NONE)) {
+ card->dmactrl = 0;
+ outb(card->dmactrl, card->base + NJ_DMACTRL);
+ outb(0, card->base + NJ_IRQMASK0);
+ }
+ test_and_clear_bit(FLG_HDLC, &bc->bch.Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &bc->bch.Flags);
+ bc->txstate = 0;
+ bc->rxstate = 0;
+ bc->lastrx = -1;
+ break;
+ case ISDN_P_B_RAW:
+ test_and_set_bit(FLG_TRANSPARENT, &bc->bch.Flags);
+ bc->bch.state = protocol;
+ bc->idx = 0;
+ bc->free = card->send.size/2;
+ bc->rxstate = 0;
+ bc->txstate = TX_INIT | TX_IDLE;
+ bc->lastrx = -1;
+ if (!card->dmactrl) {
+ card->dmactrl = 1;
+ outb(card->dmactrl, card->base + NJ_DMACTRL);
+ outb(0x0f, card->base + NJ_IRQMASK0);
+ }
+ break;
+ case ISDN_P_B_HDLC:
+ test_and_set_bit(FLG_HDLC, &bc->bch.Flags);
+ bc->bch.state = protocol;
+ bc->idx = 0;
+ bc->free = card->send.size/2;
+ bc->rxstate = 0;
+ bc->txstate = TX_INIT | TX_IDLE;
+ isdnhdlc_rcv_init(&bc->hrecv, 0);
+ isdnhdlc_out_init(&bc->hsend, 0);
+ bc->lastrx = -1;
+ if (!card->dmactrl) {
+ card->dmactrl = 1;
+ outb(card->dmactrl, card->base + NJ_DMACTRL);
+ outb(0x0f, card->base + NJ_IRQMASK0);
+ }
+ break;
+ default:
+ pr_info("%s: %s protocol %x not handled\n", card->name,
+ __func__, protocol);
+ return -ENOPROTOOPT;
+ }
+ card->send.dmacur = inl(card->base + NJ_DMA_READ_ADR);
+ card->recv.dmacur = inl(card->base + NJ_DMA_WRITE_ADR);
+ card->send.idx = (card->send.dmacur - card->send.dmastart) >> 2;
+ card->recv.idx = (card->recv.dmacur - card->recv.dmastart) >> 2;
+ pr_debug("%s: %s ctrl %x irq %02x/%02x idx %d/%d\n",
+ card->name, __func__,
+ inb(card->base + NJ_DMACTRL),
+ inb(card->base + NJ_IRQMASK0),
+ inb(card->base + NJ_IRQSTAT0),
+ card->send.idx,
+ card->recv.idx);
+ return 0;
+}
+
+static void
+nj_reset(struct tiger_hw *card)
+{
+ outb(0xff, card->base + NJ_CTRL); /* Reset On */
+ mdelay(1);
+
+ /* now edge triggered for TJ320 GE 13/07/00 */
+ /* see comment in IRQ function */
+ if (card->typ == NETJET_S_TJ320) /* TJ320 */
+ card->ctrlreg = 0x40; /* Reset Off and status read clear */
+ else
+ card->ctrlreg = 0x00; /* Reset Off and status read clear */
+ outb(card->ctrlreg, card->base + NJ_CTRL);
+ mdelay(10);
+
+ /* configure AUX pins (all output except ISAC IRQ pin) */
+ card->auxd = 0;
+ card->dmactrl = 0;
+ outb(~NJ_ISACIRQ, card->base + NJ_AUXCTRL);
+ outb(NJ_ISACIRQ, card->base + NJ_IRQMASK1);
+ outb(card->auxd, card->base + NJ_AUXDATA);
+}
+
+static int
+inittiger(struct tiger_hw *card)
+{
+ int i;
+
+ card->dma_p = pci_alloc_consistent(card->pdev, NJ_DMA_SIZE,
+ &card->dma);
+ if (!card->dma_p) {
+ pr_info("%s: No DMA memory\n", card->name);
+ return -ENOMEM;
+ }
+ if ((u64)card->dma > 0xffffffff) {
+ pr_info("%s: DMA outside 32 bit\n", card->name);
+ return -ENOMEM;
+ }
+ for (i = 0; i < 2; i++) {
+ card->bc[i].hsbuf = kmalloc(NJ_DMA_TXSIZE, GFP_KERNEL);
+ if (!card->bc[i].hsbuf) {
+ pr_info("%s: no B%d send buffer\n", card->name, i + 1);
+ return -ENOMEM;
+ }
+ card->bc[i].hrbuf = kmalloc(NJ_DMA_RXSIZE, GFP_KERNEL);
+ if (!card->bc[i].hrbuf) {
+ pr_info("%s: no B%d recv buffer\n", card->name, i + 1);
+ return -ENOMEM;
+ }
+ }
+ memset(card->dma_p, 0xff, NJ_DMA_SIZE);
+
+ card->send.start = card->dma_p;
+ card->send.dmastart = (u32)card->dma;
+ card->send.dmaend = card->send.dmastart +
+ (4 * (NJ_DMA_TXSIZE - 1));
+ card->send.dmairq = card->send.dmastart +
+ (4 * ((NJ_DMA_TXSIZE / 2) - 1));
+ card->send.size = NJ_DMA_TXSIZE;
+
+ if (debug & DEBUG_HW)
+ pr_notice("%s: send buffer phy %#x - %#x - %#x virt %p"
+ " size %zu u32\n", card->name,
+ card->send.dmastart, card->send.dmairq,
+ card->send.dmaend, card->send.start, card->send.size);
+
+ outl(card->send.dmastart, card->base + NJ_DMA_READ_START);
+ outl(card->send.dmairq, card->base + NJ_DMA_READ_IRQ);
+ outl(card->send.dmaend, card->base + NJ_DMA_READ_END);
+
+ card->recv.start = card->dma_p + (NJ_DMA_SIZE / 2);
+ card->recv.dmastart = (u32)card->dma + (NJ_DMA_SIZE / 2);
+ card->recv.dmaend = card->recv.dmastart +
+ (4 * (NJ_DMA_RXSIZE - 1));
+ card->recv.dmairq = card->recv.dmastart +
+ (4 * ((NJ_DMA_RXSIZE / 2) - 1));
+ card->recv.size = NJ_DMA_RXSIZE;
+
+ if (debug & DEBUG_HW)
+ pr_notice("%s: recv buffer phy %#x - %#x - %#x virt %p"
+ " size %zu u32\n", card->name,
+ card->recv.dmastart, card->recv.dmairq,
+ card->recv.dmaend, card->recv.start, card->recv.size);
+
+ outl(card->recv.dmastart, card->base + NJ_DMA_WRITE_START);
+ outl(card->recv.dmairq, card->base + NJ_DMA_WRITE_IRQ);
+ outl(card->recv.dmaend, card->base + NJ_DMA_WRITE_END);
+ return 0;
+}
+
+static void
+read_dma(struct tiger_ch *bc, u32 idx, int cnt)
+{
+ struct tiger_hw *card = bc->bch.hw;
+ int i, stat;
+ u32 val;
+ u8 *p, *pn;
+
+ if (bc->lastrx == idx) {
+ bc->rxstate |= RX_OVERRUN;
+ pr_info("%s: B%1d overrun at idx %d\n", card->name,
+ bc->bch.nr, idx);
+ }
+ bc->lastrx = idx;
+ if (!bc->bch.rx_skb) {
+ bc->bch.rx_skb = mI_alloc_skb(bc->bch.maxlen, GFP_ATOMIC);
+ if (!bc->bch.rx_skb) {
+ pr_info("%s: B%1d receive out of memory\n",
+ card->name, bc->bch.nr);
+ return;
+ }
+ }
+
+ if (test_bit(FLG_TRANSPARENT, &bc->bch.Flags)) {
+ if ((bc->bch.rx_skb->len + cnt) > bc->bch.maxlen) {
+ pr_debug("%s: B%1d overrun %d\n", card->name,
+ bc->bch.nr, bc->bch.rx_skb->len + cnt);
+ skb_trim(bc->bch.rx_skb, 0);
+ return;
+ }
+ p = skb_put(bc->bch.rx_skb, cnt);
+ } else
+ p = bc->hrbuf;
+
+ for (i = 0; i < cnt; i++) {
+ val = card->recv.start[idx++];
+ if (bc->bch.nr & 2)
+ val >>= 8;
+ if (idx >= card->recv.size)
+ idx = 0;
+ p[i] = val & 0xff;
+ }
+ pn = bc->hrbuf;
+next_frame:
+ if (test_bit(FLG_HDLC, &bc->bch.Flags)) {
+ stat = isdnhdlc_decode(&bc->hrecv, pn, cnt, &i,
+ bc->bch.rx_skb->data, bc->bch.maxlen);
+ if (stat > 0) /* valid frame received */
+ p = skb_put(bc->bch.rx_skb, stat);
+ else if (stat == -HDLC_CRC_ERROR)
+ pr_info("%s: B%1d receive frame CRC error\n",
+ card->name, bc->bch.nr);
+ else if (stat == -HDLC_FRAMING_ERROR)
+ pr_info("%s: B%1d receive framing error\n",
+ card->name, bc->bch.nr);
+ else if (stat == -HDLC_LENGTH_ERROR)
+ pr_info("%s: B%1d receive frame too long (> %d)\n",
+ card->name, bc->bch.nr, bc->bch.maxlen);
+ } else
+ stat = cnt;
+
+ if (stat > 0) {
+ if (debug & DEBUG_HW_BFIFO) {
+ snprintf(card->log, LOG_SIZE, "B%1d-recv %s %d ",
+ bc->bch.nr, card->name, stat);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET,
+ p, stat);
+ }
+ recv_Bchannel(&bc->bch, 0);
+ }
+ if (test_bit(FLG_HDLC, &bc->bch.Flags)) {
+ pn += i;
+ cnt -= i;
+ if (!bc->bch.rx_skb) {
+ bc->bch.rx_skb = mI_alloc_skb(bc->bch.maxlen,
+ GFP_ATOMIC);
+ if (!bc->bch.rx_skb) {
+ pr_info("%s: B%1d receive out of memory\n",
+ card->name, bc->bch.nr);
+ return;
+ }
+ }
+ if (cnt > 0)
+ goto next_frame;
+ }
+}
+
+static void
+recv_tiger(struct tiger_hw *card, u8 irq_stat)
+{
+ u32 idx;
+ int cnt = card->recv.size / 2;
+
+ /* Note receive is via the WRITE DMA channel */
+ card->last_is0 &= ~NJ_IRQM0_WR_MASK;
+ card->last_is0 |= (irq_stat & NJ_IRQM0_WR_MASK);
+
+ if (irq_stat & NJ_IRQM0_WR_END)
+ idx = cnt - 1;
+ else
+ idx = card->recv.size - 1;
+
+ if (test_bit(FLG_ACTIVE, &card->bc[0].bch.Flags))
+ read_dma(&card->bc[0], idx, cnt);
+ if (test_bit(FLG_ACTIVE, &card->bc[1].bch.Flags))
+ read_dma(&card->bc[1], idx, cnt);
+}
+
+/* sync with current DMA address at start or after exception */
+static void
+resync(struct tiger_ch *bc, struct tiger_hw *card)
+{
+ card->send.dmacur = inl(card->base | NJ_DMA_READ_ADR);
+ card->send.idx = (card->send.dmacur - card->send.dmastart) >> 2;
+ if (bc->free > card->send.size / 2)
+ bc->free = card->send.size / 2;
+ /* currently we simple sync to the next complete free area
+ * this hast the advantage that we have always maximum time to
+ * handle TX irq
+ */
+ if (card->send.idx < ((card->send.size / 2) - 1))
+ bc->idx = (card->recv.size / 2) - 1;
+ else
+ bc->idx = card->recv.size - 1;
+ bc->txstate = TX_RUN;
+ pr_debug("%s: %s B%1d free %d idx %d/%d\n", card->name,
+ __func__, bc->bch.nr, bc->free, bc->idx, card->send.idx);
+}
+
+static int bc_next_frame(struct tiger_ch *);
+
+static void
+fill_hdlc_flag(struct tiger_ch *bc)
+{
+ struct tiger_hw *card = bc->bch.hw;
+ int count, i;
+ u32 m, v;
+ u8 *p;
+
+ if (bc->free == 0)
+ return;
+ pr_debug("%s: %s B%1d %d state %x idx %d/%d\n", card->name,
+ __func__, bc->bch.nr, bc->free, bc->txstate,
+ bc->idx, card->send.idx);
+ if (bc->txstate & (TX_IDLE | TX_INIT | TX_UNDERRUN))
+ resync(bc, card);
+ count = isdnhdlc_encode(&bc->hsend, NULL, 0, &i,
+ bc->hsbuf, bc->free);
+ pr_debug("%s: B%1d hdlc encoded %d flags\n", card->name,
+ bc->bch.nr, count);
+ bc->free -= count;
+ p = bc->hsbuf;
+ m = (bc->bch.nr & 1) ? 0xffffff00 : 0xffff00ff;
+ for (i = 0; i < count; i++) {
+ if (bc->idx >= card->send.size)
+ bc->idx = 0;
+ v = card->send.start[bc->idx];
+ v &= m;
+ v |= (bc->bch.nr & 1) ? (u32)(p[i]) : ((u32)(p[i])) << 8;
+ card->send.start[bc->idx++] = v;
+ }
+ if (debug & DEBUG_HW_BFIFO) {
+ snprintf(card->log, LOG_SIZE, "B%1d-send %s %d ",
+ bc->bch.nr, card->name, count);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET, p, count);
+ }
+}
+
+static void
+fill_dma(struct tiger_ch *bc)
+{
+ struct tiger_hw *card = bc->bch.hw;
+ int count, i;
+ u32 m, v;
+ u8 *p;
+
+ if (bc->free == 0)
+ return;
+ count = bc->bch.tx_skb->len - bc->bch.tx_idx;
+ if (count <= 0)
+ return;
+ pr_debug("%s: %s B%1d %d/%d/%d/%d state %x idx %d/%d\n", card->name,
+ __func__, bc->bch.nr, count, bc->free, bc->bch.tx_idx,
+ bc->bch.tx_skb->len, bc->txstate, bc->idx, card->send.idx);
+ if (bc->txstate & (TX_IDLE | TX_INIT | TX_UNDERRUN))
+ resync(bc, card);
+ p = bc->bch.tx_skb->data + bc->bch.tx_idx;
+ if (test_bit(FLG_HDLC, &bc->bch.Flags)) {
+ count = isdnhdlc_encode(&bc->hsend, p, count, &i,
+ bc->hsbuf, bc->free);
+ pr_debug("%s: B%1d hdlc encoded %d in %d\n", card->name,
+ bc->bch.nr, i, count);
+ bc->bch.tx_idx += i;
+ bc->free -= count;
+ p = bc->hsbuf;
+ } else {
+ if (count > bc->free)
+ count = bc->free;
+ bc->bch.tx_idx += count;
+ bc->free -= count;
+ }
+ m = (bc->bch.nr & 1) ? 0xffffff00 : 0xffff00ff;
+ for (i = 0; i < count; i++) {
+ if (bc->idx >= card->send.size)
+ bc->idx = 0;
+ v = card->send.start[bc->idx];
+ v &= m;
+ v |= (bc->bch.nr & 1) ? (u32)(p[i]) : ((u32)(p[i])) << 8;
+ card->send.start[bc->idx++] = v;
+ }
+ if (debug & DEBUG_HW_BFIFO) {
+ snprintf(card->log, LOG_SIZE, "B%1d-send %s %d ",
+ bc->bch.nr, card->name, count);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET, p, count);
+ }
+ if (bc->free)
+ bc_next_frame(bc);
+}
+
+
+static int
+bc_next_frame(struct tiger_ch *bc)
+{
+ if (bc->bch.tx_skb && bc->bch.tx_idx < bc->bch.tx_skb->len)
+ fill_dma(bc);
+ else {
+ if (bc->bch.tx_skb) {
+ /* send confirm, on trans, free on hdlc. */
+ if (test_bit(FLG_TRANSPARENT, &bc->bch.Flags))
+ confirm_Bsend(&bc->bch);
+ dev_kfree_skb(bc->bch.tx_skb);
+ }
+ if (get_next_bframe(&bc->bch))
+ fill_dma(bc);
+ else
+ return 0;
+ }
+ return 1;
+}
+
+static void
+send_tiger_bc(struct tiger_hw *card, struct tiger_ch *bc)
+{
+ int ret;
+
+ bc->free += card->send.size / 2;
+ if (bc->free >= card->send.size) {
+ if (!(bc->txstate & (TX_UNDERRUN | TX_INIT))) {
+ pr_info("%s: B%1d TX underrun state %x\n", card->name,
+ bc->bch.nr, bc->txstate);
+ bc->txstate |= TX_UNDERRUN;
+ }
+ bc->free = card->send.size;
+ }
+ ret = bc_next_frame(bc);
+ if (!ret) {
+ if (test_bit(FLG_HDLC, &bc->bch.Flags)) {
+ fill_hdlc_flag(bc);
+ return;
+ }
+ pr_debug("%s: B%1d TX no data free %d idx %d/%d\n", card->name,
+ bc->bch.nr, bc->free, bc->idx, card->send.idx);
+ if (!(bc->txstate & (TX_IDLE | TX_INIT))) {
+ fill_mem(bc, bc->idx, bc->free, 0xff);
+ if (bc->free == card->send.size)
+ bc->txstate |= TX_IDLE;
+ }
+ }
+}
+
+static void
+send_tiger(struct tiger_hw *card, u8 irq_stat)
+{
+ int i;
+
+ /* Note send is via the READ DMA channel */
+ if ((irq_stat & card->last_is0) & NJ_IRQM0_RD_MASK) {
+ pr_info("%s: tiger warn write double dma %x/%x\n",
+ card->name, irq_stat, card->last_is0);
+ return;
+ } else {
+ card->last_is0 &= ~NJ_IRQM0_RD_MASK;
+ card->last_is0 |= (irq_stat & NJ_IRQM0_RD_MASK);
+ }
+ for (i = 0; i < 2; i++) {
+ if (test_bit(FLG_ACTIVE, &card->bc[i].bch.Flags))
+ send_tiger_bc(card, &card->bc[i]);
+ }
+}
+
+static irqreturn_t
+nj_irq(int intno, void *dev_id)
+{
+ struct tiger_hw *card = dev_id;
+ u8 val, s1val, s0val;
+
+ spin_lock(&card->lock);
+ s0val = inb(card->base | NJ_IRQSTAT0);
+ s1val = inb(card->base | NJ_IRQSTAT1);
+ if ((s1val & NJ_ISACIRQ) && (s0val == 0)) {
+ /* shared IRQ */
+ spin_unlock(&card->lock);
+ return IRQ_NONE;
+ }
+ pr_debug("%s: IRQSTAT0 %02x IRQSTAT1 %02x\n", card->name, s0val, s1val);
+ card->irqcnt++;
+ if (!(s1val & NJ_ISACIRQ)) {
+ val = ReadISAC_nj(card, ISAC_ISTA);
+ if (val)
+ mISDNisac_irq(&card->isac, val);
+ }
+
+ if (s0val)
+ /* write to clear */
+ outb(s0val, card->base | NJ_IRQSTAT0);
+ else
+ goto end;
+ s1val = s0val;
+ /* set bits in sval to indicate which page is free */
+ card->recv.dmacur = inl(card->base | NJ_DMA_WRITE_ADR);
+ card->recv.idx = (card->recv.dmacur - card->recv.dmastart) >> 2;
+ if (card->recv.dmacur < card->recv.dmairq)
+ s0val = 0x08; /* the 2nd write area is free */
+ else
+ s0val = 0x04; /* the 1st write area is free */
+
+ card->send.dmacur = inl(card->base | NJ_DMA_READ_ADR);
+ card->send.idx = (card->send.dmacur - card->send.dmastart) >> 2;
+ if (card->send.dmacur < card->send.dmairq)
+ s0val |= 0x02; /* the 2nd read area is free */
+ else
+ s0val |= 0x01; /* the 1st read area is free */
+
+ pr_debug("%s: DMA Status %02x/%02x/%02x %d/%d\n", card->name,
+ s1val, s0val, card->last_is0,
+ card->recv.idx, card->send.idx);
+ /* test if we have a DMA interrupt */
+ if (s0val != card->last_is0) {
+ if ((s0val & NJ_IRQM0_RD_MASK) !=
+ (card->last_is0 & NJ_IRQM0_RD_MASK))
+ /* got a write dma int */
+ send_tiger(card, s0val);
+ if ((s0val & NJ_IRQM0_WR_MASK) !=
+ (card->last_is0 & NJ_IRQM0_WR_MASK))
+ /* got a read dma int */
+ recv_tiger(card, s0val);
+ }
+end:
+ spin_unlock(&card->lock);
+ return IRQ_HANDLED;
+}
+
+static int
+nj_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ int ret = -EINVAL;
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct tiger_ch *bc = container_of(bch, struct tiger_ch, bch);
+ struct tiger_hw *card = bch->hw;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ ret = bchannel_senddata(bch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ fill_dma(bc);
+ ret = 0;
+ spin_unlock_irqrestore(&card->lock, flags);
+ if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(&card->lock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+ ret = mode_tiger(bc, ch->protocol);
+ else
+ ret = 0;
+ spin_unlock_irqrestore(&card->lock, flags);
+ if (!ret)
+ _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ break;
+ case PH_DEACTIVATE_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ mISDN_clear_bchannel(bch);
+ mode_tiger(bc, ISDN_P_NONE);
+ spin_unlock_irqrestore(&card->lock, flags);
+ _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ ret = 0;
+ break;
+ }
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static int
+channel_bctrl(struct tiger_ch *bc, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+ struct tiger_hw *card = bc->bch.hw;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = 0;
+ break;
+ /* Nothing implemented yet */
+ case MISDN_CTRL_FILL_EMPTY:
+ default:
+ pr_info("%s: %s unknown Op %x\n", card->name, __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+nj_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct tiger_ch *bc = container_of(bch, struct tiger_ch, bch);
+ struct tiger_hw *card = bch->hw;
+ int ret = -EINVAL;
+ u_long flags;
+
+ pr_debug("%s: %s cmd:%x %p\n", card->name, __func__, cmd, arg);
+ switch (cmd) {
+ case CLOSE_CHANNEL:
+ test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ if (test_bit(FLG_ACTIVE, &bch->Flags)) {
+ spin_lock_irqsave(&card->lock, flags);
+ mISDN_freebchannel(bch);
+ test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+ test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+ mode_tiger(bc, ISDN_P_NONE);
+ spin_unlock_irqrestore(&card->lock, flags);
+ }
+ ch->protocol = ISDN_P_NONE;
+ ch->peer = NULL;
+ module_put(THIS_MODULE);
+ ret = 0;
+ break;
+ case CONTROL_CHANNEL:
+ ret = channel_bctrl(bc, arg);
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x)\n", card->name, __func__, cmd);
+ }
+ return ret;
+}
+
+static int
+channel_ctrl(struct tiger_hw *card, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = MISDN_CTRL_LOOP;
+ break;
+ case MISDN_CTRL_LOOP:
+ /* cq->channel: 0 disable, 1 B1 loop 2 B2 loop, 3 both */
+ if (cq->channel < 0 || cq->channel > 3) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = card->isac.ctrl(&card->isac, HW_TESTLOOP, cq->channel);
+ break;
+ default:
+ pr_info("%s: %s unknown Op %x\n", card->name, __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+open_bchannel(struct tiger_hw *card, struct channel_req *rq)
+{
+ struct bchannel *bch;
+
+ if (rq->adr.channel > 2)
+ return -EINVAL;
+ if (rq->protocol == ISDN_P_NONE)
+ return -EINVAL;
+ bch = &card->bc[rq->adr.channel - 1].bch;
+ if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+ return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
+ bch->ch.protocol = rq->protocol;
+ rq->ch = &bch->ch;
+ return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+nj_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct tiger_hw *card = dch->hw;
+ struct channel_req *rq;
+ int err = 0;
+
+ pr_debug("%s: %s cmd:%x %p\n", card->name, __func__, cmd, arg);
+ switch (cmd) {
+ case OPEN_CHANNEL:
+ rq = arg;
+ if (rq->protocol == ISDN_P_TE_S0)
+ err = card->isac.open(&card->isac, rq);
+ else
+ err = open_bchannel(card, rq);
+ if (err)
+ break;
+ if (!try_module_get(THIS_MODULE))
+ pr_info("%s: cannot get module\n", card->name);
+ break;
+ case CLOSE_CHANNEL:
+ pr_debug("%s: dev(%d) close from %p\n", card->name, dch->dev.id,
+ __builtin_return_address(0));
+ module_put(THIS_MODULE);
+ break;
+ case CONTROL_CHANNEL:
+ err = channel_ctrl(card, arg);
+ break;
+ default:
+ pr_debug("%s: %s unknown command %x\n",
+ card->name, __func__, cmd);
+ return -EINVAL;
+ }
+ return err;
+}
+
+static int
+nj_init_card(struct tiger_hw *card)
+{
+ u_long flags;
+ int ret;
+
+ spin_lock_irqsave(&card->lock, flags);
+ nj_disable_hwirq(card);
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ card->irq = card->pdev->irq;
+ if (request_irq(card->irq, nj_irq, IRQF_SHARED, card->name, card)) {
+ pr_info("%s: couldn't get interrupt %d\n",
+ card->name, card->irq);
+ card->irq = -1;
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&card->lock, flags);
+ nj_reset(card);
+ ret = card->isac.init(&card->isac);
+ if (ret)
+ goto error;
+ ret = inittiger(card);
+ if (ret)
+ goto error;
+ mode_tiger(&card->bc[0], ISDN_P_NONE);
+ mode_tiger(&card->bc[1], ISDN_P_NONE);
+error:
+ spin_unlock_irqrestore(&card->lock, flags);
+ return ret;
+}
+
+
+static void
+nj_release(struct tiger_hw *card)
+{
+ u_long flags;
+ int i;
+
+ if (card->base_s) {
+ spin_lock_irqsave(&card->lock, flags);
+ nj_disable_hwirq(card);
+ mode_tiger(&card->bc[0], ISDN_P_NONE);
+ mode_tiger(&card->bc[1], ISDN_P_NONE);
+ card->isac.release(&card->isac);
+ spin_unlock_irqrestore(&card->lock, flags);
+ release_region(card->base, card->base_s);
+ card->base_s = 0;
+ }
+ if (card->irq > 0)
+ free_irq(card->irq, card);
+ if (card->isac.dch.dev.dev.class)
+ mISDN_unregister_device(&card->isac.dch.dev);
+
+ for (i = 0; i < 2; i++) {
+ mISDN_freebchannel(&card->bc[i].bch);
+ kfree(card->bc[i].hsbuf);
+ kfree(card->bc[i].hrbuf);
+ }
+ if (card->dma_p)
+ pci_free_consistent(card->pdev, NJ_DMA_SIZE,
+ card->dma_p, card->dma);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ pci_clear_master(card->pdev);
+ pci_disable_device(card->pdev);
+ pci_set_drvdata(card->pdev, NULL);
+ kfree(card);
+}
+
+
+static int
+nj_setup(struct tiger_hw *card)
+{
+ card->base = pci_resource_start(card->pdev, 0);
+ card->base_s = pci_resource_len(card->pdev, 0);
+ if (!request_region(card->base, card->base_s, card->name)) {
+ pr_info("%s: NETjet config port %#x-%#x already in use\n",
+ card->name, card->base,
+ (u32)(card->base + card->base_s - 1));
+ card->base_s = 0;
+ return -EIO;
+ }
+ ASSIGN_FUNC(nj, ISAC, card->isac);
+ return 0;
+}
+
+
+static int __devinit
+setup_instance(struct tiger_hw *card)
+{
+ int i, err;
+ u_long flags;
+
+ snprintf(card->name, MISDN_MAX_IDLEN - 1, "netjet.%d", nj_cnt + 1);
+ write_lock_irqsave(&card_lock, flags);
+ list_add_tail(&card->list, &Cards);
+ write_unlock_irqrestore(&card_lock, flags);
+
+ _set_debug(card);
+ card->isac.name = card->name;
+ spin_lock_init(&card->lock);
+ card->isac.hwlock = &card->lock;
+ mISDNisac_init(&card->isac, card);
+
+ card->isac.dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+ card->isac.dch.dev.D.ctrl = nj_dctrl;
+ for (i = 0; i < 2; i++) {
+ card->bc[i].bch.nr = i + 1;
+ set_channelmap(i + 1, card->isac.dch.dev.channelmap);
+ mISDN_initbchannel(&card->bc[i].bch, MAX_DATA_MEM);
+ card->bc[i].bch.hw = card;
+ card->bc[i].bch.ch.send = nj_l2l1B;
+ card->bc[i].bch.ch.ctrl = nj_bctrl;
+ card->bc[i].bch.ch.nr = i + 1;
+ list_add(&card->bc[i].bch.ch.list,
+ &card->isac.dch.dev.bchannels);
+ card->bc[i].bch.hw = card;
+ }
+ err = nj_setup(card);
+ if (err)
+ goto error;
+ err = mISDN_register_device(&card->isac.dch.dev, &card->pdev->dev,
+ card->name);
+ if (err)
+ goto error;
+ err = nj_init_card(card);
+ if (!err) {
+ nj_cnt++;
+ pr_notice("Netjet %d cards installed\n", nj_cnt);
+ return 0;
+ }
+error:
+ nj_release(card);
+ return err;
+}
+
+static int __devinit
+nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = -ENOMEM;
+ int cfg;
+ struct tiger_hw *card;
+
+ if (pdev->subsystem_vendor == 0x8086 &&
+ pdev->subsystem_device == 0x0003) {
+ pr_notice("Netjet: Digium X100P/X101P not handled\n");
+ return -ENODEV;
+ }
+
+ if (pdev->subsystem_vendor == 0x55 &&
+ pdev->subsystem_device == 0x02) {
+ pr_notice("Netjet: Enter!Now not handled yet\n");
+ return -ENODEV;
+ }
+
+ card = kzalloc(sizeof(struct tiger_hw), GFP_ATOMIC);
+ if (!card) {
+ pr_info("No kmem for Netjet\n");
+ return err;
+ }
+
+ card->pdev = pdev;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ kfree(card);
+ return err;
+ }
+
+ printk(KERN_INFO "nj_probe(mISDN): found adapter at %s\n",
+ pci_name(pdev));
+
+ pci_set_master(pdev);
+
+ /* the TJ300 and TJ320 must be detected, the IRQ handling is different
+ * unfortunately the chips use the same device ID, but the TJ320 has
+ * the bit20 in status PCI cfg register set
+ */
+ pci_read_config_dword(pdev, 0x04, &cfg);
+ if (cfg & 0x00100000)
+ card->typ = NETJET_S_TJ320;
+ else
+ card->typ = NETJET_S_TJ300;
+
+ card->base = pci_resource_start(pdev, 0);
+ card->irq = pdev->irq;
+ pci_set_drvdata(pdev, card);
+ err = setup_instance(card);
+ if (err)
+ pci_set_drvdata(pdev, NULL);
+
+ return err;
+}
+
+
+static void __devexit nj_remove(struct pci_dev *pdev)
+{
+ struct tiger_hw *card = pci_get_drvdata(pdev);
+
+ if (card)
+ nj_release(card);
+ else
+ pr_info("%s drvdata already removed\n", __func__);
+}
+
+/* We cannot select cards with PCI_SUB... IDs, since here are cards with
+ * SUB IDs set to PCI_ANY_ID, so we need to match all and reject
+ * known other cards which not work with this driver - see probe function */
+static struct pci_device_id nj_pci_ids[] __devinitdata = {
+ { PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { }
+};
+MODULE_DEVICE_TABLE(pci, nj_pci_ids);
+
+static struct pci_driver nj_driver = {
+ .name = "netjet",
+ .probe = nj_probe,
+ .remove = __devexit_p(nj_remove),
+ .id_table = nj_pci_ids,
+};
+
+static int __init nj_init(void)
+{
+ int err;
+
+ pr_notice("Netjet PCI driver Rev. %s\n", NETJET_REV);
+ err = pci_register_driver(&nj_driver);
+ return err;
+}
+
+static void __exit nj_cleanup(void)
+{
+ pci_unregister_driver(&nj_driver);
+}
+
+module_init(nj_init);
+module_exit(nj_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/netjet.h b/drivers/isdn/hardware/mISDN/netjet.h
new file mode 100644
index 0000000..d061ff9
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/netjet.h
@@ -0,0 +1,58 @@
+/*
+ * NETjet common header file
+ *
+ * Author Karsten Keil
+ * based on work of Matt Henderson and Daniel Potts,
+ * Traverse Technologies P/L www.traverse.com.au
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define NJ_CTRL 0x00
+#define NJ_DMACTRL 0x01
+#define NJ_AUXCTRL 0x02
+#define NJ_AUXDATA 0x03
+#define NJ_IRQMASK0 0x04
+#define NJ_IRQMASK1 0x05
+#define NJ_IRQSTAT0 0x06
+#define NJ_IRQSTAT1 0x07
+#define NJ_DMA_READ_START 0x08
+#define NJ_DMA_READ_IRQ 0x0c
+#define NJ_DMA_READ_END 0x10
+#define NJ_DMA_READ_ADR 0x14
+#define NJ_DMA_WRITE_START 0x18
+#define NJ_DMA_WRITE_IRQ 0x1c
+#define NJ_DMA_WRITE_END 0x20
+#define NJ_DMA_WRITE_ADR 0x24
+#define NJ_PULSE_CNT 0x28
+
+#define NJ_ISAC_OFF 0xc0
+#define NJ_ISACIRQ 0x10
+
+#define NJ_IRQM0_RD_MASK 0x03
+#define NJ_IRQM0_RD_IRQ 0x01
+#define NJ_IRQM0_RD_END 0x02
+#define NJ_IRQM0_WR_MASK 0x0c
+#define NJ_IRQM0_WR_IRQ 0x04
+#define NJ_IRQM0_WR_END 0x08
+
+/* one page here is no need to be smaller */
+#define NJ_DMA_SIZE 4096
+/* 2 * 64 byte is a compromise between IRQ count and latency */
+#define NJ_DMA_RXSIZE 128 /* 2 * 64 */
+#define NJ_DMA_TXSIZE 128 /* 2 * 64 */
+
diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c
new file mode 100644
index 0000000..ff3a4e2
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/speedfax.c
@@ -0,0 +1,526 @@
+/*
+ * speedfax.c low level stuff for Sedlbauer Speedfax+ cards
+ * based on the ISAR DSP
+ * Thanks to Sedlbauer AG for informations and HW
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include <linux/firmware.h>
+#include "ipac.h"
+#include "isar.h"
+
+#define SPEEDFAX_REV "2.0"
+
+#define PCI_SUBVENDOR_SPEEDFAX_PYRAMID 0x51
+#define PCI_SUBVENDOR_SPEEDFAX_PCI 0x54
+#define PCI_SUB_ID_SEDLBAUER 0x01
+
+#define SFAX_PCI_ADDR 0xc8
+#define SFAX_PCI_ISAC 0xd0
+#define SFAX_PCI_ISAR 0xe0
+
+/* TIGER 100 Registers */
+
+#define TIGER_RESET_ADDR 0x00
+#define TIGER_EXTERN_RESET_ON 0x01
+#define TIGER_EXTERN_RESET_OFF 0x00
+#define TIGER_AUX_CTRL 0x02
+#define TIGER_AUX_DATA 0x03
+#define TIGER_AUX_IRQMASK 0x05
+#define TIGER_AUX_STATUS 0x07
+
+/* Tiger AUX BITs */
+#define SFAX_AUX_IOMASK 0xdd /* 1 and 5 are inputs */
+#define SFAX_ISAR_RESET_BIT_OFF 0x00
+#define SFAX_ISAR_RESET_BIT_ON 0x01
+#define SFAX_TIGER_IRQ_BIT 0x02
+#define SFAX_LED1_BIT 0x08
+#define SFAX_LED2_BIT 0x10
+
+#define SFAX_PCI_RESET_ON (SFAX_ISAR_RESET_BIT_ON)
+#define SFAX_PCI_RESET_OFF (SFAX_LED1_BIT | SFAX_LED2_BIT)
+
+static int sfax_cnt;
+static u32 debug;
+static u32 irqloops = 4;
+
+struct sfax_hw {
+ struct list_head list;
+ struct pci_dev *pdev;
+ char name[MISDN_MAX_IDLEN];
+ u32 irq;
+ u32 irqcnt;
+ u32 cfg;
+ struct _ioport p_isac;
+ struct _ioport p_isar;
+ u8 aux_data;
+ spinlock_t lock; /* HW access lock */
+ struct isac_hw isac;
+ struct isar_hw isar;
+};
+
+static LIST_HEAD(Cards);
+static DEFINE_RWLOCK(card_lock); /* protect Cards */
+
+static void
+_set_debug(struct sfax_hw *card)
+{
+ card->isac.dch.debug = debug;
+ card->isar.ch[0].bch.debug = debug;
+ card->isar.ch[1].bch.debug = debug;
+}
+
+static int
+set_debug(const char *val, struct kernel_param *kp)
+{
+ int ret;
+ struct sfax_hw *card;
+
+ ret = param_set_uint(val, kp);
+ if (!ret) {
+ read_lock(&card_lock);
+ list_for_each_entry(card, &Cards, list)
+ _set_debug(card);
+ read_unlock(&card_lock);
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(SPEEDFAX_REV);
+module_param_call(debug, set_debug, param_get_uint, &debug, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Speedfax debug mask");
+module_param(irqloops, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(irqloops, "Speedfax maximal irqloops (default 4)");
+
+IOFUNC_IND(ISAC, sfax_hw, p_isac)
+IOFUNC_IND(ISAR, sfax_hw, p_isar)
+
+static irqreturn_t
+speedfax_irq(int intno, void *dev_id)
+{
+ struct sfax_hw *sf = dev_id;
+ u8 val;
+ int cnt = irqloops;
+
+ spin_lock(&sf->lock);
+ val = inb(sf->cfg + TIGER_AUX_STATUS);
+ if (val & SFAX_TIGER_IRQ_BIT) { /* for us or shared ? */
+ spin_unlock(&sf->lock);
+ return IRQ_NONE; /* shared */
+ }
+ sf->irqcnt++;
+ val = ReadISAR_IND(sf, ISAR_IRQBIT);
+Start_ISAR:
+ if (val & ISAR_IRQSTA)
+ mISDNisar_irq(&sf->isar);
+ val = ReadISAC_IND(sf, ISAC_ISTA);
+ if (val)
+ mISDNisac_irq(&sf->isac, val);
+ val = ReadISAR_IND(sf, ISAR_IRQBIT);
+ if ((val & ISAR_IRQSTA) && cnt--)
+ goto Start_ISAR;
+ if (cnt < irqloops)
+ pr_debug("%s: %d irqloops cpu%d\n", sf->name,
+ irqloops - cnt, smp_processor_id());
+ if (irqloops && !cnt)
+ pr_notice("%s: %d IRQ LOOP cpu%d\n", sf->name,
+ irqloops, smp_processor_id());
+ spin_unlock(&sf->lock);
+ return IRQ_HANDLED;
+}
+
+static void
+enable_hwirq(struct sfax_hw *sf)
+{
+ WriteISAC_IND(sf, ISAC_MASK, 0);
+ WriteISAR_IND(sf, ISAR_IRQBIT, ISAR_IRQMSK);
+ outb(SFAX_TIGER_IRQ_BIT, sf->cfg + TIGER_AUX_IRQMASK);
+}
+
+static void
+disable_hwirq(struct sfax_hw *sf)
+{
+ WriteISAC_IND(sf, ISAC_MASK, 0xFF);
+ WriteISAR_IND(sf, ISAR_IRQBIT, 0);
+ outb(0, sf->cfg + TIGER_AUX_IRQMASK);
+}
+
+static void
+reset_speedfax(struct sfax_hw *sf)
+{
+
+ pr_debug("%s: resetting card\n", sf->name);
+ outb(TIGER_EXTERN_RESET_ON, sf->cfg + TIGER_RESET_ADDR);
+ outb(SFAX_PCI_RESET_ON, sf->cfg + TIGER_AUX_DATA);
+ mdelay(1);
+ outb(TIGER_EXTERN_RESET_OFF, sf->cfg + TIGER_RESET_ADDR);
+ sf->aux_data = SFAX_PCI_RESET_OFF;
+ outb(sf->aux_data, sf->cfg + TIGER_AUX_DATA);
+ mdelay(1);
+}
+
+static int
+sfax_ctrl(struct sfax_hw *sf, u32 cmd, u_long arg)
+{
+ int ret = 0;
+
+ switch (cmd) {
+ case HW_RESET_REQ:
+ reset_speedfax(sf);
+ break;
+ case HW_ACTIVATE_IND:
+ if (arg & 1)
+ sf->aux_data &= ~SFAX_LED1_BIT;
+ if (arg & 2)
+ sf->aux_data &= ~SFAX_LED2_BIT;
+ outb(sf->aux_data, sf->cfg + TIGER_AUX_DATA);
+ break;
+ case HW_DEACT_IND:
+ if (arg & 1)
+ sf->aux_data |= SFAX_LED1_BIT;
+ if (arg & 2)
+ sf->aux_data |= SFAX_LED2_BIT;
+ outb(sf->aux_data, sf->cfg + TIGER_AUX_DATA);
+ break;
+ default:
+ pr_info("%s: %s unknown command %x %lx\n",
+ sf->name, __func__, cmd, arg);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+channel_ctrl(struct sfax_hw *sf, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = MISDN_CTRL_LOOP;
+ break;
+ case MISDN_CTRL_LOOP:
+ /* cq->channel: 0 disable, 1 B1 loop 2 B2 loop, 3 both */
+ if (cq->channel < 0 || cq->channel > 3) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = sf->isac.ctrl(&sf->isac, HW_TESTLOOP, cq->channel);
+ break;
+ default:
+ pr_info("%s: unknown Op %x\n", sf->name, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+sfax_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct sfax_hw *sf = dch->hw;
+ struct channel_req *rq;
+ int err = 0;
+
+ pr_debug("%s: cmd:%x %p\n", sf->name, cmd, arg);
+ switch (cmd) {
+ case OPEN_CHANNEL:
+ rq = arg;
+ if (rq->protocol == ISDN_P_TE_S0)
+ err = sf->isac.open(&sf->isac, rq);
+ else
+ err = sf->isar.open(&sf->isar, rq);
+ if (err)
+ break;
+ if (!try_module_get(THIS_MODULE))
+ pr_info("%s: cannot get module\n", sf->name);
+ break;
+ case CLOSE_CHANNEL:
+ pr_debug("%s: dev(%d) close from %p\n", sf->name,
+ dch->dev.id, __builtin_return_address(0));
+ module_put(THIS_MODULE);
+ break;
+ case CONTROL_CHANNEL:
+ err = channel_ctrl(sf, arg);
+ break;
+ default:
+ pr_debug("%s: unknown command %x\n", sf->name, cmd);
+ return -EINVAL;
+ }
+ return err;
+}
+
+static int __devinit
+init_card(struct sfax_hw *sf)
+{
+ int ret, cnt = 3;
+ u_long flags;
+
+ ret = request_irq(sf->irq, speedfax_irq, IRQF_SHARED, sf->name, sf);
+ if (ret) {
+ pr_info("%s: couldn't get interrupt %d\n", sf->name, sf->irq);
+ return ret;
+ }
+ while (cnt--) {
+ spin_lock_irqsave(&sf->lock, flags);
+ ret = sf->isac.init(&sf->isac);
+ if (ret) {
+ spin_unlock_irqrestore(&sf->lock, flags);
+ pr_info("%s: ISAC init failed with %d\n",
+ sf->name, ret);
+ break;
+ }
+ enable_hwirq(sf);
+ /* RESET Receiver and Transmitter */
+ WriteISAC_IND(sf, ISAC_CMDR, 0x41);
+ spin_unlock_irqrestore(&sf->lock, flags);
+ msleep_interruptible(10);
+ if (debug & DEBUG_HW)
+ pr_notice("%s: IRQ %d count %d\n", sf->name,
+ sf->irq, sf->irqcnt);
+ if (!sf->irqcnt) {
+ pr_info("%s: IRQ(%d) got no requests during init %d\n",
+ sf->name, sf->irq, 3 - cnt);
+ } else
+ return 0;
+ }
+ free_irq(sf->irq, sf);
+ return -EIO;
+}
+
+
+static int __devinit
+setup_speedfax(struct sfax_hw *sf)
+{
+ u_long flags;
+
+ if (!request_region(sf->cfg, 256, sf->name)) {
+ pr_info("mISDN: %s config port %x-%x already in use\n",
+ sf->name, sf->cfg, sf->cfg + 255);
+ return -EIO;
+ }
+ outb(0xff, sf->cfg);
+ outb(0, sf->cfg);
+ outb(0xdd, sf->cfg + TIGER_AUX_CTRL);
+ outb(0, sf->cfg + TIGER_AUX_IRQMASK);
+
+ sf->isac.type = IPAC_TYPE_ISAC;
+ sf->p_isac.ale = sf->cfg + SFAX_PCI_ADDR;
+ sf->p_isac.port = sf->cfg + SFAX_PCI_ISAC;
+ sf->p_isar.ale = sf->cfg + SFAX_PCI_ADDR;
+ sf->p_isar.port = sf->cfg + SFAX_PCI_ISAR;
+ ASSIGN_FUNC(IND, ISAC, sf->isac);
+ ASSIGN_FUNC(IND, ISAR, sf->isar);
+ spin_lock_irqsave(&sf->lock, flags);
+ reset_speedfax(sf);
+ disable_hwirq(sf);
+ spin_unlock_irqrestore(&sf->lock, flags);
+ return 0;
+}
+
+static void
+release_card(struct sfax_hw *card) {
+ u_long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ disable_hwirq(card);
+ spin_unlock_irqrestore(&card->lock, flags);
+ card->isac.release(&card->isac);
+ free_irq(card->irq, card);
+ card->isar.release(&card->isar);
+ mISDN_unregister_device(&card->isac.dch.dev);
+ release_region(card->cfg, 256);
+ pci_disable_device(card->pdev);
+ pci_set_drvdata(card->pdev, NULL);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ kfree(card);
+ sfax_cnt--;
+}
+
+static int __devinit
+setup_instance(struct sfax_hw *card)
+{
+ const struct firmware *firmware;
+ int i, err;
+ u_long flags;
+
+ snprintf(card->name, MISDN_MAX_IDLEN - 1, "Speedfax.%d", sfax_cnt + 1);
+ write_lock_irqsave(&card_lock, flags);
+ list_add_tail(&card->list, &Cards);
+ write_unlock_irqrestore(&card_lock, flags);
+ _set_debug(card);
+ spin_lock_init(&card->lock);
+ card->isac.hwlock = &card->lock;
+ card->isar.hwlock = &card->lock;
+ card->isar.ctrl = (void *)&sfax_ctrl;
+ card->isac.name = card->name;
+ card->isar.name = card->name;
+ card->isar.owner = THIS_MODULE;
+
+ err = request_firmware(&firmware, "isdn/ISAR.BIN", &card->pdev->dev);
+ if (err < 0) {
+ pr_info("%s: firmware request failed %d\n",
+ card->name, err);
+ goto error_fw;
+ }
+ if (debug & DEBUG_HW)
+ pr_notice("%s: got firmware %zu bytes\n",
+ card->name, firmware->size);
+
+ mISDNisac_init(&card->isac, card);
+
+ card->isac.dch.dev.D.ctrl = sfax_dctrl;
+ card->isac.dch.dev.Bprotocols =
+ mISDNisar_init(&card->isar, card);
+ for (i = 0; i < 2; i++) {
+ set_channelmap(i + 1, card->isac.dch.dev.channelmap);
+ list_add(&card->isar.ch[i].bch.ch.list,
+ &card->isac.dch.dev.bchannels);
+ }
+
+ err = setup_speedfax(card);
+ if (err)
+ goto error_setup;
+ err = card->isar.init(&card->isar);
+ if (err)
+ goto error;
+ err = mISDN_register_device(&card->isac.dch.dev,
+ &card->pdev->dev, card->name);
+ if (err)
+ goto error;
+ err = init_card(card);
+ if (err)
+ goto error_init;
+ err = card->isar.firmware(&card->isar, firmware->data, firmware->size);
+ if (!err) {
+ release_firmware(firmware);
+ sfax_cnt++;
+ pr_notice("SpeedFax %d cards installed\n", sfax_cnt);
+ return 0;
+ }
+ disable_hwirq(card);
+ free_irq(card->irq, card);
+error_init:
+ mISDN_unregister_device(&card->isac.dch.dev);
+error:
+ release_region(card->cfg, 256);
+error_setup:
+ card->isac.release(&card->isac);
+ card->isar.release(&card->isar);
+ release_firmware(firmware);
+error_fw:
+ pci_disable_device(card->pdev);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ kfree(card);
+ return err;
+}
+
+static int __devinit
+sfaxpci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = -ENOMEM;
+ struct sfax_hw *card = kzalloc(sizeof(struct sfax_hw), GFP_KERNEL);
+
+ if (!card) {
+ pr_info("No memory for Speedfax+ PCI\n");
+ return err;
+ }
+ card->pdev = pdev;
+ err = pci_enable_device(pdev);
+ if (err) {
+ kfree(card);
+ return err;
+ }
+
+ pr_notice("mISDN: Speedfax found adapter %s at %s\n",
+ (char *)ent->driver_data, pci_name(pdev));
+
+ card->cfg = pci_resource_start(pdev, 0);
+ card->irq = pdev->irq;
+ pci_set_drvdata(pdev, card);
+ err = setup_instance(card);
+ if (err)
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void __devexit
+sfax_remove_pci(struct pci_dev *pdev)
+{
+ struct sfax_hw *card = pci_get_drvdata(pdev);
+
+ if (card)
+ release_card(card);
+ else
+ pr_debug("%s: drvdata allready removed\n", __func__);
+}
+
+static struct pci_device_id sfaxpci_ids[] __devinitdata = {
+ { PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100,
+ PCI_SUBVENDOR_SPEEDFAX_PYRAMID, PCI_SUB_ID_SEDLBAUER,
+ 0, 0, (unsigned long) "Pyramid Speedfax + PCI"
+ },
+ { PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_100,
+ PCI_SUBVENDOR_SPEEDFAX_PCI, PCI_SUB_ID_SEDLBAUER,
+ 0, 0, (unsigned long) "Sedlbauer Speedfax + PCI"
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, sfaxpci_ids);
+
+static struct pci_driver sfaxpci_driver = {
+ .name = "speedfax+ pci",
+ .probe = sfaxpci_probe,
+ .remove = __devexit_p(sfax_remove_pci),
+ .id_table = sfaxpci_ids,
+};
+
+static int __init
+Speedfax_init(void)
+{
+ int err;
+
+ pr_notice("Sedlbauer Speedfax+ Driver Rev. %s\n",
+ SPEEDFAX_REV);
+ err = pci_register_driver(&sfaxpci_driver);
+ return err;
+}
+
+static void __exit
+Speedfax_cleanup(void)
+{
+ pci_unregister_driver(&sfaxpci_driver);
+}
+
+module_init(Speedfax_init);
+module_exit(Speedfax_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c
new file mode 100644
index 0000000..d3f1077
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/w6692.c
@@ -0,0 +1,1440 @@
+/*
+ * w6692.c mISDN driver for Winbond w6692 based cards
+ *
+ * Author Karsten Keil <kkeil@suse.de>
+ * based on the w6692 I4L driver from Petr Novak <petr.novak@i.cz>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include "w6692.h"
+
+#define W6692_REV "2.0"
+
+#define DBUSY_TIMER_VALUE 80
+
+enum {
+ W6692_ASUS,
+ W6692_WINBOND,
+ W6692_USR
+};
+
+/* private data in the PCI devices list */
+struct w6692map {
+ u_int subtype;
+ char *name;
+};
+
+static const struct w6692map w6692_map[] =
+{
+ {W6692_ASUS, "Dynalink/AsusCom IS64PH"},
+ {W6692_WINBOND, "Winbond W6692"},
+ {W6692_USR, "USR W6692"}
+};
+
+#ifndef PCI_VENDOR_ID_USR
+#define PCI_VENDOR_ID_USR 0x16ec
+#define PCI_DEVICE_ID_USR_6692 0x3409
+#endif
+
+struct w6692_ch {
+ struct bchannel bch;
+ u32 addr;
+ struct timer_list timer;
+ u8 b_mode;
+};
+
+struct w6692_hw {
+ struct list_head list;
+ struct pci_dev *pdev;
+ char name[MISDN_MAX_IDLEN];
+ u32 irq;
+ u32 irqcnt;
+ u32 addr;
+ u32 fmask; /* feature mask - bit set per card nr */
+ int subtype;
+ spinlock_t lock; /* hw lock */
+ u8 imask;
+ u8 pctl;
+ u8 xaddr;
+ u8 xdata;
+ u8 state;
+ struct w6692_ch bc[2];
+ struct dchannel dch;
+ char log[64];
+};
+
+static LIST_HEAD(Cards);
+static DEFINE_RWLOCK(card_lock); /* protect Cards */
+
+static int w6692_cnt;
+static int debug;
+static u32 led;
+static u32 pots;
+
+static void
+_set_debug(struct w6692_hw *card)
+{
+ card->dch.debug = debug;
+ card->bc[0].bch.debug = debug;
+ card->bc[1].bch.debug = debug;
+}
+
+static int
+set_debug(const char *val, struct kernel_param *kp)
+{
+ int ret;
+ struct w6692_hw *card;
+
+ ret = param_set_uint(val, kp);
+ if (!ret) {
+ read_lock(&card_lock);
+ list_for_each_entry(card, &Cards, list)
+ _set_debug(card);
+ read_unlock(&card_lock);
+ }
+ return ret;
+}
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(W6692_REV);
+module_param_call(debug, set_debug, param_get_uint, &debug, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "W6692 debug mask");
+module_param(led, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(led, "W6692 LED support bitmask (one bit per card)");
+module_param(pots, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pots, "W6692 POTS support bitmask (one bit per card)");
+
+static inline u8
+ReadW6692(struct w6692_hw *card, u8 offset)
+{
+ return inb(card->addr + offset);
+}
+
+static inline void
+WriteW6692(struct w6692_hw *card, u8 offset, u8 value)
+{
+ outb(value, card->addr + offset);
+}
+
+static inline u8
+ReadW6692B(struct w6692_ch *bc, u8 offset)
+{
+ return inb(bc->addr + offset);
+}
+
+static inline void
+WriteW6692B(struct w6692_ch *bc, u8 offset, u8 value)
+{
+ outb(value, bc->addr + offset);
+}
+
+static void
+enable_hwirq(struct w6692_hw *card)
+{
+ WriteW6692(card, W_IMASK, card->imask);
+}
+
+static void
+disable_hwirq(struct w6692_hw *card)
+{
+ WriteW6692(card, W_IMASK, 0xff);
+}
+
+static const char *W6692Ver[] = {"V00", "V01", "V10", "V11"};
+
+static void
+W6692Version(struct w6692_hw *card)
+{
+ int val;
+
+ val = ReadW6692(card, W_D_RBCH);
+ pr_notice("%s: Winbond W6692 version: %s\n", card->name,
+ W6692Ver[(val >> 6) & 3]);
+}
+
+static void
+w6692_led_handler(struct w6692_hw *card, int on)
+{
+ if ((!(card->fmask & led)) || card->subtype == W6692_USR)
+ return;
+ if (on) {
+ card->xdata &= 0xfb; /* LED ON */
+ WriteW6692(card, W_XDATA, card->xdata);
+ } else {
+ card->xdata |= 0x04; /* LED OFF */
+ WriteW6692(card, W_XDATA, card->xdata);
+ }
+}
+
+static void
+ph_command(struct w6692_hw *card, u8 cmd)
+{
+ pr_debug("%s: ph_command %x\n", card->name, cmd);
+ WriteW6692(card, W_CIX, cmd);
+}
+
+static void
+W6692_new_ph(struct w6692_hw *card)
+{
+ if (card->state == W_L1CMD_RST)
+ ph_command(card, W_L1CMD_DRC);
+ schedule_event(&card->dch, FLG_PHCHANGE);
+}
+
+static void
+W6692_ph_bh(struct dchannel *dch)
+{
+ struct w6692_hw *card = dch->hw;
+
+ switch (card->state) {
+ case W_L1CMD_RST:
+ dch->state = 0;
+ l1_event(dch->l1, HW_RESET_IND);
+ break;
+ case W_L1IND_CD:
+ dch->state = 3;
+ l1_event(dch->l1, HW_DEACT_CNF);
+ break;
+ case W_L1IND_DRD:
+ dch->state = 3;
+ l1_event(dch->l1, HW_DEACT_IND);
+ break;
+ case W_L1IND_CE:
+ dch->state = 4;
+ l1_event(dch->l1, HW_POWERUP_IND);
+ break;
+ case W_L1IND_LD:
+ if (dch->state <= 5) {
+ dch->state = 5;
+ l1_event(dch->l1, ANYSIGNAL);
+ } else {
+ dch->state = 8;
+ l1_event(dch->l1, LOSTFRAMING);
+ }
+ break;
+ case W_L1IND_ARD:
+ dch->state = 6;
+ l1_event(dch->l1, INFO2);
+ break;
+ case W_L1IND_AI8:
+ dch->state = 7;
+ l1_event(dch->l1, INFO4_P8);
+ break;
+ case W_L1IND_AI10:
+ dch->state = 7;
+ l1_event(dch->l1, INFO4_P10);
+ break;
+ default:
+ pr_debug("%s: TE unknown state %02x dch state %02x\n",
+ card->name, card->state, dch->state);
+ break;
+ }
+ pr_debug("%s: TE newstate %02x\n", card->name, dch->state);
+}
+
+static void
+W6692_empty_Dfifo(struct w6692_hw *card, int count)
+{
+ struct dchannel *dch = &card->dch;
+ u8 *ptr;
+
+ pr_debug("%s: empty_Dfifo %d\n", card->name, count);
+ if (!dch->rx_skb) {
+ dch->rx_skb = mI_alloc_skb(card->dch.maxlen, GFP_ATOMIC);
+ if (!dch->rx_skb) {
+ pr_info("%s: D receive out of memory\n", card->name);
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_RACK);
+ return;
+ }
+ }
+ if ((dch->rx_skb->len + count) >= dch->maxlen) {
+ pr_debug("%s: empty_Dfifo overrun %d\n", card->name,
+ dch->rx_skb->len + count);
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_RACK);
+ return;
+ }
+ ptr = skb_put(dch->rx_skb, count);
+ insb(card->addr + W_D_RFIFO, ptr, count);
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_RACK);
+ if (debug & DEBUG_HW_DFIFO) {
+ snprintf(card->log, 63, "D-recv %s %d ",
+ card->name, count);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET, ptr, count);
+ }
+}
+
+static void
+W6692_fill_Dfifo(struct w6692_hw *card)
+{
+ struct dchannel *dch = &card->dch;
+ int count;
+ u8 *ptr;
+ u8 cmd = W_D_CMDR_XMS;
+
+ pr_debug("%s: fill_Dfifo\n", card->name);
+ if (!dch->tx_skb)
+ return;
+ count = dch->tx_skb->len - dch->tx_idx;
+ if (count <= 0)
+ return;
+ if (count > W_D_FIFO_THRESH)
+ count = W_D_FIFO_THRESH;
+ else
+ cmd |= W_D_CMDR_XME;
+ ptr = dch->tx_skb->data + dch->tx_idx;
+ dch->tx_idx += count;
+ outsb(card->addr + W_D_XFIFO, ptr, count);
+ WriteW6692(card, W_D_CMDR, cmd);
+ if (test_and_set_bit(FLG_BUSY_TIMER, &dch->Flags)) {
+ pr_debug("%s: fill_Dfifo dbusytimer running\n", card->name);
+ del_timer(&dch->timer);
+ }
+ init_timer(&dch->timer);
+ dch->timer.expires = jiffies + ((DBUSY_TIMER_VALUE * HZ)/1000);
+ add_timer(&dch->timer);
+ if (debug & DEBUG_HW_DFIFO) {
+ snprintf(card->log, 63, "D-send %s %d ",
+ card->name, count);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET, ptr, count);
+ }
+}
+
+static void
+d_retransmit(struct w6692_hw *card)
+{
+ struct dchannel *dch = &card->dch;
+
+ if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+ del_timer(&dch->timer);
+#ifdef FIXME
+ if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+ dchannel_sched_event(dch, D_CLEARBUSY);
+#endif
+ if (test_bit(FLG_TX_BUSY, &dch->Flags)) {
+ /* Restart frame */
+ dch->tx_idx = 0;
+ W6692_fill_Dfifo(card);
+ } else if (dch->tx_skb) { /* should not happen */
+ pr_info("%s: %s without TX_BUSY\n", card->name, __func__);
+ test_and_set_bit(FLG_TX_BUSY, &dch->Flags);
+ dch->tx_idx = 0;
+ W6692_fill_Dfifo(card);
+ } else {
+ pr_info("%s: XDU no TX_BUSY\n", card->name);
+ if (get_next_dframe(dch))
+ W6692_fill_Dfifo(card);
+ }
+}
+
+static void
+handle_rxD(struct w6692_hw *card) {
+ u8 stat;
+ int count;
+
+ stat = ReadW6692(card, W_D_RSTA);
+ if (stat & (W_D_RSTA_RDOV | W_D_RSTA_CRCE | W_D_RSTA_RMB)) {
+ if (stat & W_D_RSTA_RDOV) {
+ pr_debug("%s: D-channel RDOV\n", card->name);
+#ifdef ERROR_STATISTIC
+ card->dch.err_rx++;
+#endif
+ }
+ if (stat & W_D_RSTA_CRCE) {
+ pr_debug("%s: D-channel CRC error\n", card->name);
+#ifdef ERROR_STATISTIC
+ card->dch.err_crc++;
+#endif
+ }
+ if (stat & W_D_RSTA_RMB) {
+ pr_debug("%s: D-channel ABORT\n", card->name);
+#ifdef ERROR_STATISTIC
+ card->dch.err_rx++;
+#endif
+ }
+ if (card->dch.rx_skb)
+ dev_kfree_skb(card->dch.rx_skb);
+ card->dch.rx_skb = NULL;
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_RACK | W_D_CMDR_RRST);
+ } else {
+ count = ReadW6692(card, W_D_RBCL) & (W_D_FIFO_THRESH - 1);
+ if (count == 0)
+ count = W_D_FIFO_THRESH;
+ W6692_empty_Dfifo(card, count);
+ recv_Dchannel(&card->dch);
+ }
+}
+
+static void
+handle_txD(struct w6692_hw *card) {
+ if (test_and_clear_bit(FLG_BUSY_TIMER, &card->dch.Flags))
+ del_timer(&card->dch.timer);
+ if (card->dch.tx_skb && card->dch.tx_idx < card->dch.tx_skb->len) {
+ W6692_fill_Dfifo(card);
+ } else {
+ if (card->dch.tx_skb)
+ dev_kfree_skb(card->dch.tx_skb);
+ if (get_next_dframe(&card->dch))
+ W6692_fill_Dfifo(card);
+ }
+}
+
+static void
+handle_statusD(struct w6692_hw *card)
+{
+ struct dchannel *dch = &card->dch;
+ u8 exval, v1, cir;
+
+ exval = ReadW6692(card, W_D_EXIR);
+
+ pr_debug("%s: D_EXIR %02x\n", card->name, exval);
+ if (exval & (W_D_EXI_XDUN | W_D_EXI_XCOL)) {
+ /* Transmit underrun/collision */
+ pr_debug("%s: D-channel underrun/collision\n", card->name);
+#ifdef ERROR_STATISTIC
+ dch->err_tx++;
+#endif
+ d_retransmit(card);
+ }
+ if (exval & W_D_EXI_RDOV) { /* RDOV */
+ pr_debug("%s: D-channel RDOV\n", card->name);
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_RRST);
+ }
+ if (exval & W_D_EXI_TIN2) /* TIN2 - never */
+ pr_debug("%s: spurious TIN2 interrupt\n", card->name);
+ if (exval & W_D_EXI_MOC) { /* MOC - not supported */
+ v1 = ReadW6692(card, W_MOSR);
+ pr_debug("%s: spurious MOC interrupt MOSR %02x\n",
+ card->name, v1);
+ }
+ if (exval & W_D_EXI_ISC) { /* ISC - Level1 change */
+ cir = ReadW6692(card, W_CIR);
+ pr_debug("%s: ISC CIR %02X\n", card->name, cir);
+ if (cir & W_CIR_ICC) {
+ v1 = cir & W_CIR_COD_MASK;
+ pr_debug("%s: ph_state_change %x -> %x\n", card->name,
+ dch->state, v1);
+ card->state = v1;
+ if (card->fmask & led) {
+ switch (v1) {
+ case W_L1IND_AI8:
+ case W_L1IND_AI10:
+ w6692_led_handler(card, 1);
+ break;
+ default:
+ w6692_led_handler(card, 0);
+ break;
+ }
+ }
+ W6692_new_ph(card);
+ }
+ if (cir & W_CIR_SCC) {
+ v1 = ReadW6692(card, W_SQR);
+ pr_debug("%s: SCC SQR %02X\n", card->name, v1);
+ }
+ }
+ if (exval & W_D_EXI_WEXP)
+ pr_debug("%s: spurious WEXP interrupt!\n", card->name);
+ if (exval & W_D_EXI_TEXP)
+ pr_debug("%s: spurious TEXP interrupt!\n", card->name);
+}
+
+static void
+W6692_empty_Bfifo(struct w6692_ch *wch, int count)
+{
+ struct w6692_hw *card = wch->bch.hw;
+ u8 *ptr;
+
+ pr_debug("%s: empty_Bfifo %d\n", card->name, count);
+ if (unlikely(wch->bch.state == ISDN_P_NONE)) {
+ pr_debug("%s: empty_Bfifo ISDN_P_NONE\n", card->name);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK | W_B_CMDR_RACT);
+ if (wch->bch.rx_skb)
+ skb_trim(wch->bch.rx_skb, 0);
+ return;
+ }
+ if (!wch->bch.rx_skb) {
+ wch->bch.rx_skb = mI_alloc_skb(wch->bch.maxlen, GFP_ATOMIC);
+ if (unlikely(!wch->bch.rx_skb)) {
+ pr_info("%s: B receive out of memory\n", card->name);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK |
+ W_B_CMDR_RACT);
+ return;
+ }
+ }
+ if (wch->bch.rx_skb->len + count > wch->bch.maxlen) {
+ pr_debug("%s: empty_Bfifo incoming packet too large\n",
+ card->name);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK | W_B_CMDR_RACT);
+ skb_trim(wch->bch.rx_skb, 0);
+ return;
+ }
+ ptr = skb_put(wch->bch.rx_skb, count);
+ insb(wch->addr + W_B_RFIFO, ptr, count);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK | W_B_CMDR_RACT);
+ if (debug & DEBUG_HW_DFIFO) {
+ snprintf(card->log, 63, "B%1d-recv %s %d ",
+ wch->bch.nr, card->name, count);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET, ptr, count);
+ }
+}
+
+static void
+W6692_fill_Bfifo(struct w6692_ch *wch)
+{
+ struct w6692_hw *card = wch->bch.hw;
+ int count;
+ u8 *ptr, cmd = W_B_CMDR_RACT | W_B_CMDR_XMS;
+
+ pr_debug("%s: fill Bfifo\n", card->name);
+ if (!wch->bch.tx_skb)
+ return;
+ count = wch->bch.tx_skb->len - wch->bch.tx_idx;
+ if (count <= 0)
+ return;
+ ptr = wch->bch.tx_skb->data + wch->bch.tx_idx;
+ if (count > W_B_FIFO_THRESH)
+ count = W_B_FIFO_THRESH;
+ else if (test_bit(FLG_HDLC, &wch->bch.Flags))
+ cmd |= W_B_CMDR_XME;
+
+ pr_debug("%s: fill Bfifo%d/%d\n", card->name,
+ count, wch->bch.tx_idx);
+ wch->bch.tx_idx += count;
+ outsb(wch->addr + W_B_XFIFO, ptr, count);
+ WriteW6692B(wch, W_B_CMDR, cmd);
+ if (debug & DEBUG_HW_DFIFO) {
+ snprintf(card->log, 63, "B%1d-send %s %d ",
+ wch->bch.nr, card->name, count);
+ print_hex_dump_bytes(card->log, DUMP_PREFIX_OFFSET, ptr, count);
+ }
+}
+
+static int
+setvolume(struct w6692_ch *wch, int mic, struct sk_buff *skb)
+{
+ struct w6692_hw *card = wch->bch.hw;
+ u16 *vol = (u16 *)skb->data;
+ u8 val;
+
+ if ((!(card->fmask & pots)) ||
+ !test_bit(FLG_TRANSPARENT, &wch->bch.Flags))
+ return -ENODEV;
+ if (skb->len < 2)
+ return -EINVAL;
+ if (*vol > 7)
+ return -EINVAL;
+ val = *vol & 7;
+ val = 7 - val;
+ if (mic) {
+ val <<= 3;
+ card->xaddr &= 0xc7;
+ } else {
+ card->xaddr &= 0xf8;
+ }
+ card->xaddr |= val;
+ WriteW6692(card, W_XADDR, card->xaddr);
+ return 0;
+}
+
+static int
+enable_pots(struct w6692_ch *wch)
+{
+ struct w6692_hw *card = wch->bch.hw;
+
+ if ((!(card->fmask & pots)) ||
+ !test_bit(FLG_TRANSPARENT, &wch->bch.Flags))
+ return -ENODEV;
+ wch->b_mode |= W_B_MODE_EPCM | W_B_MODE_BSW0;
+ WriteW6692B(wch, W_B_MODE, wch->b_mode);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_XRST);
+ card->pctl |= ((wch->bch.nr & 2) ? W_PCTL_PCX : 0);
+ WriteW6692(card, W_PCTL, card->pctl);
+ return 0;
+}
+
+static int
+disable_pots(struct w6692_ch *wch)
+{
+ struct w6692_hw *card = wch->bch.hw;
+
+ if (!(card->fmask & pots))
+ return -ENODEV;
+ wch->b_mode &= ~(W_B_MODE_EPCM | W_B_MODE_BSW0);
+ WriteW6692B(wch, W_B_MODE, wch->b_mode);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_RACT |
+ W_B_CMDR_XRST);
+ return 0;
+}
+
+static int
+w6692_mode(struct w6692_ch *wch, u32 pr)
+{
+ struct w6692_hw *card;
+
+ card = wch->bch.hw;
+ pr_debug("%s: B%d protocol %x-->%x\n", card->name,
+ wch->bch.nr, wch->bch.state, pr);
+ switch (pr) {
+ case ISDN_P_NONE:
+ if ((card->fmask & pots) && (wch->b_mode & W_B_MODE_EPCM))
+ disable_pots(wch);
+ wch->b_mode = 0;
+ mISDN_clear_bchannel(&wch->bch);
+ WriteW6692B(wch, W_B_MODE, wch->b_mode);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_XRST);
+ test_and_clear_bit(FLG_HDLC, &wch->bch.Flags);
+ test_and_clear_bit(FLG_TRANSPARENT, &wch->bch.Flags);
+ break;
+ case ISDN_P_B_RAW:
+ wch->b_mode = W_B_MODE_MMS;
+ WriteW6692B(wch, W_B_MODE, wch->b_mode);
+ WriteW6692B(wch, W_B_EXIM, 0);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_RACT |
+ W_B_CMDR_XRST);
+ test_and_set_bit(FLG_TRANSPARENT, &wch->bch.Flags);
+ break;
+ case ISDN_P_B_HDLC:
+ wch->b_mode = W_B_MODE_ITF;
+ WriteW6692B(wch, W_B_MODE, wch->b_mode);
+ WriteW6692B(wch, W_B_ADM1, 0xff);
+ WriteW6692B(wch, W_B_ADM2, 0xff);
+ WriteW6692B(wch, W_B_EXIM, 0);
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_RACT |
+ W_B_CMDR_XRST);
+ test_and_set_bit(FLG_HDLC, &wch->bch.Flags);
+ break;
+ default:
+ pr_info("%s: protocol %x not known\n", card->name, pr);
+ return -ENOPROTOOPT;
+ }
+ wch->bch.state = pr;
+ return 0;
+}
+
+static void
+send_next(struct w6692_ch *wch)
+{
+ if (wch->bch.tx_skb && wch->bch.tx_idx < wch->bch.tx_skb->len)
+ W6692_fill_Bfifo(wch);
+ else {
+ if (wch->bch.tx_skb) {
+ /* send confirm, on trans, free on hdlc. */
+ if (test_bit(FLG_TRANSPARENT, &wch->bch.Flags))
+ confirm_Bsend(&wch->bch);
+ dev_kfree_skb(wch->bch.tx_skb);
+ }
+ if (get_next_bframe(&wch->bch))
+ W6692_fill_Bfifo(wch);
+ }
+}
+
+static void
+W6692B_interrupt(struct w6692_hw *card, int ch)
+{
+ struct w6692_ch *wch = &card->bc[ch];
+ int count;
+ u8 stat, star = 0;
+
+ stat = ReadW6692B(wch, W_B_EXIR);
+ pr_debug("%s: B%d EXIR %02x\n", card->name, wch->bch.nr, stat);
+ if (stat & W_B_EXI_RME) {
+ star = ReadW6692B(wch, W_B_STAR);
+ if (star & (W_B_STAR_RDOV | W_B_STAR_CRCE | W_B_STAR_RMB)) {
+ if ((star & W_B_STAR_RDOV) &&
+ test_bit(FLG_ACTIVE, &wch->bch.Flags)) {
+ pr_debug("%s: B%d RDOV proto=%x\n", card->name,
+ wch->bch.nr, wch->bch.state);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_rdo++;
+#endif
+ }
+ if (test_bit(FLG_HDLC, &wch->bch.Flags)) {
+ if (star & W_B_STAR_CRCE) {
+ pr_debug("%s: B%d CRC error\n",
+ card->name, wch->bch.nr);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_crc++;
+#endif
+ }
+ if (star & W_B_STAR_RMB) {
+ pr_debug("%s: B%d message abort\n",
+ card->name, wch->bch.nr);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_inv++;
+#endif
+ }
+ }
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK |
+ W_B_CMDR_RRST | W_B_CMDR_RACT);
+ if (wch->bch.rx_skb)
+ skb_trim(wch->bch.rx_skb, 0);
+ } else {
+ count = ReadW6692B(wch, W_B_RBCL) &
+ (W_B_FIFO_THRESH - 1);
+ if (count == 0)
+ count = W_B_FIFO_THRESH;
+ W6692_empty_Bfifo(wch, count);
+ recv_Bchannel(&wch->bch, 0);
+ }
+ }
+ if (stat & W_B_EXI_RMR) {
+ if (!(stat & W_B_EXI_RME))
+ star = ReadW6692B(wch, W_B_STAR);
+ if (star & W_B_STAR_RDOV) {
+ pr_debug("%s: B%d RDOV proto=%x\n", card->name,
+ wch->bch.nr, wch->bch.state);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_rdo++;
+#endif
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK |
+ W_B_CMDR_RRST | W_B_CMDR_RACT);
+ } else {
+ W6692_empty_Bfifo(wch, W_B_FIFO_THRESH);
+ if (test_bit(FLG_TRANSPARENT, &wch->bch.Flags) &&
+ wch->bch.rx_skb && (wch->bch.rx_skb->len > 0))
+ recv_Bchannel(&wch->bch, 0);
+ }
+ }
+ if (stat & W_B_EXI_RDOV) {
+ /* only if it is not handled yet */
+ if (!(star & W_B_STAR_RDOV)) {
+ pr_debug("%s: B%d RDOV IRQ proto=%x\n", card->name,
+ wch->bch.nr, wch->bch.state);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_rdo++;
+#endif
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_RACK |
+ W_B_CMDR_RRST | W_B_CMDR_RACT);
+ }
+ }
+ if (stat & W_B_EXI_XFR) {
+ if (!(stat & (W_B_EXI_RME | W_B_EXI_RMR))) {
+ star = ReadW6692B(wch, W_B_STAR);
+ pr_debug("%s: B%d star %02x\n", card->name,
+ wch->bch.nr, star);
+ }
+ if (star & W_B_STAR_XDOW) {
+ pr_debug("%s: B%d XDOW proto=%x\n", card->name,
+ wch->bch.nr, wch->bch.state);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_xdu++;
+#endif
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_XRST |
+ W_B_CMDR_RACT);
+ /* resend */
+ if (wch->bch.tx_skb) {
+ if (!test_bit(FLG_TRANSPARENT, &wch->bch.Flags))
+ wch->bch.tx_idx = 0;
+ }
+ }
+ send_next(wch);
+ if (stat & W_B_EXI_XDUN)
+ return; /* handle XDOW only once */
+ }
+ if (stat & W_B_EXI_XDUN) {
+ pr_debug("%s: B%d XDUN proto=%x\n", card->name,
+ wch->bch.nr, wch->bch.state);
+#ifdef ERROR_STATISTIC
+ wch->bch.err_xdu++;
+#endif
+ WriteW6692B(wch, W_B_CMDR, W_B_CMDR_XRST | W_B_CMDR_RACT);
+ /* resend */
+ if (wch->bch.tx_skb) {
+ if (!test_bit(FLG_TRANSPARENT, &wch->bch.Flags))
+ wch->bch.tx_idx = 0;
+ }
+ send_next(wch);
+ }
+}
+
+static irqreturn_t
+w6692_irq(int intno, void *dev_id)
+{
+ struct w6692_hw *card = dev_id;
+ u8 ista;
+
+ spin_lock(&card->lock);
+ ista = ReadW6692(card, W_ISTA);
+ if ((ista | card->imask) == card->imask) {
+ /* possible a shared IRQ reqest */
+ spin_unlock(&card->lock);
+ return IRQ_NONE;
+ }
+ card->irqcnt++;
+ pr_debug("%s: ista %02x\n", card->name, ista);
+ ista &= ~card->imask;
+ if (ista & W_INT_B1_EXI)
+ W6692B_interrupt(card, 0);
+ if (ista & W_INT_B2_EXI)
+ W6692B_interrupt(card, 1);
+ if (ista & W_INT_D_RME)
+ handle_rxD(card);
+ if (ista & W_INT_D_RMR)
+ W6692_empty_Dfifo(card, W_D_FIFO_THRESH);
+ if (ista & W_INT_D_XFR)
+ handle_txD(card);
+ if (ista & W_INT_D_EXI)
+ handle_statusD(card);
+ if (ista & (W_INT_XINT0 | W_INT_XINT1)) /* XINT0/1 - never */
+ pr_debug("%s: W6692 spurious XINT!\n", card->name);
+/* End IRQ Handler */
+ spin_unlock(&card->lock);
+ return IRQ_HANDLED;
+}
+
+static void
+dbusy_timer_handler(struct dchannel *dch)
+{
+ struct w6692_hw *card = dch->hw;
+ int rbch, star;
+ u_long flags;
+
+ if (test_bit(FLG_BUSY_TIMER, &dch->Flags)) {
+ spin_lock_irqsave(&card->lock, flags);
+ rbch = ReadW6692(card, W_D_RBCH);
+ star = ReadW6692(card, W_D_STAR);
+ pr_debug("%s: D-Channel Busy RBCH %02x STAR %02x\n",
+ card->name, rbch, star);
+ if (star & W_D_STAR_XBZ) /* D-Channel Busy */
+ test_and_set_bit(FLG_L1_BUSY, &dch->Flags);
+ else {
+ /* discard frame; reset transceiver */
+ test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags);
+ if (dch->tx_idx)
+ dch->tx_idx = 0;
+ else
+ pr_info("%s: W6692 D-Channel Busy no tx_idx\n",
+ card->name);
+ /* Transmitter reset */
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_XRST);
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+ }
+}
+
+void initW6692(struct w6692_hw *card)
+{
+ u8 val;
+
+ card->dch.timer.function = (void *)dbusy_timer_handler;
+ card->dch.timer.data = (u_long)&card->dch;
+ init_timer(&card->dch.timer);
+ w6692_mode(&card->bc[0], ISDN_P_NONE);
+ w6692_mode(&card->bc[1], ISDN_P_NONE);
+ WriteW6692(card, W_D_CTL, 0x00);
+ disable_hwirq(card);
+ WriteW6692(card, W_D_SAM, 0xff);
+ WriteW6692(card, W_D_TAM, 0xff);
+ WriteW6692(card, W_D_MODE, W_D_MODE_RACT);
+ card->state = W_L1CMD_RST;
+ ph_command(card, W_L1CMD_RST);
+ ph_command(card, W_L1CMD_ECK);
+ /* enable all IRQ but extern */
+ card->imask = 0x18;
+ WriteW6692(card, W_D_EXIM, 0x00);
+ WriteW6692B(&card->bc[0], W_B_EXIM, 0);
+ WriteW6692B(&card->bc[1], W_B_EXIM, 0);
+ /* Reset D-chan receiver and transmitter */
+ WriteW6692(card, W_D_CMDR, W_D_CMDR_RRST | W_D_CMDR_XRST);
+ /* Reset B-chan receiver and transmitter */
+ WriteW6692B(&card->bc[0], W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_XRST);
+ WriteW6692B(&card->bc[1], W_B_CMDR, W_B_CMDR_RRST | W_B_CMDR_XRST);
+ /* enable peripheral */
+ if (card->subtype == W6692_USR) {
+ /* seems that USR implemented some power control features
+ * Pin 79 is connected to the oscilator circuit so we
+ * have to handle it here
+ */
+ card->pctl = 0x80;
+ card->xdata = 0;
+ WriteW6692(card, W_PCTL, card->pctl);
+ WriteW6692(card, W_XDATA, card->xdata);
+ } else {
+ card->pctl = W_PCTL_OE5 | W_PCTL_OE4 | W_PCTL_OE2 |
+ W_PCTL_OE1 | W_PCTL_OE0;
+ card->xaddr = 0x00;/* all sw off */
+ if (card->fmask & pots)
+ card->xdata |= 0x06; /* POWER UP/ LED OFF / ALAW */
+ if (card->fmask & led)
+ card->xdata |= 0x04; /* LED OFF */
+ if ((card->fmask & pots) || (card->fmask & led)) {
+ WriteW6692(card, W_PCTL, card->pctl);
+ WriteW6692(card, W_XADDR, card->xaddr);
+ WriteW6692(card, W_XDATA, card->xdata);
+ val = ReadW6692(card, W_XADDR);
+ if (debug & DEBUG_HW)
+ pr_notice("%s: W_XADDR=%02x\n",
+ card->name, val);
+ }
+ }
+}
+
+static void
+reset_w6692(struct w6692_hw *card)
+{
+ WriteW6692(card, W_D_CTL, W_D_CTL_SRST);
+ mdelay(10);
+ WriteW6692(card, W_D_CTL, 0);
+}
+
+static int
+init_card(struct w6692_hw *card)
+{
+ int cnt = 3;
+ u_long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ disable_hwirq(card);
+ spin_unlock_irqrestore(&card->lock, flags);
+ if (request_irq(card->irq, w6692_irq, IRQF_SHARED, card->name, card)) {
+ pr_info("%s: couldn't get interrupt %d\n", card->name,
+ card->irq);
+ return -EIO;
+ }
+ while (cnt--) {
+ spin_lock_irqsave(&card->lock, flags);
+ initW6692(card);
+ enable_hwirq(card);
+ spin_unlock_irqrestore(&card->lock, flags);
+ /* Timeout 10ms */
+ msleep_interruptible(10);
+ if (debug & DEBUG_HW)
+ pr_notice("%s: IRQ %d count %d\n", card->name,
+ card->irq, card->irqcnt);
+ if (!card->irqcnt) {
+ pr_info("%s: IRQ(%d) getting no IRQs during init %d\n",
+ card->name, card->irq, 3 - cnt);
+ reset_w6692(card);
+ } else
+ return 0;
+ }
+ free_irq(card->irq, card);
+ return -EIO;
+}
+
+static int
+w6692_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct w6692_ch *bc = container_of(bch, struct w6692_ch, bch);
+ struct w6692_hw *card = bch->hw;
+ int ret = -EINVAL;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ ret = bchannel_senddata(bch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ ret = 0;
+ W6692_fill_Bfifo(bc);
+ spin_unlock_irqrestore(&card->lock, flags);
+ if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(&card->lock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+ ret = w6692_mode(bc, ch->protocol);
+ else
+ ret = 0;
+ spin_unlock_irqrestore(&card->lock, flags);
+ if (!ret)
+ _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ break;
+ case PH_DEACTIVATE_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ mISDN_clear_bchannel(bch);
+ w6692_mode(bc, ISDN_P_NONE);
+ spin_unlock_irqrestore(&card->lock, flags);
+ _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+ NULL, GFP_KERNEL);
+ ret = 0;
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x,%x)\n",
+ card->name, __func__, hh->prim, hh->id);
+ ret = -EINVAL;
+ }
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = 0;
+ break;
+ /* Nothing implemented yet */
+ case MISDN_CTRL_FILL_EMPTY:
+ default:
+ pr_info("%s: unknown Op %x\n", __func__, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+open_bchannel(struct w6692_hw *card, struct channel_req *rq)
+{
+ struct bchannel *bch;
+
+ if (rq->adr.channel > 2)
+ return -EINVAL;
+ if (rq->protocol == ISDN_P_NONE)
+ return -EINVAL;
+ bch = &card->bc[rq->adr.channel - 1].bch;
+ if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+ return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
+ bch->ch.protocol = rq->protocol;
+ rq->ch = &bch->ch;
+ return 0;
+}
+
+static int
+channel_ctrl(struct w6692_hw *card, struct mISDN_ctrl_req *cq)
+{
+ int ret = 0;
+
+ switch (cq->op) {
+ case MISDN_CTRL_GETOP:
+ cq->op = 0;
+ break;
+ default:
+ pr_info("%s: unknown CTRL OP %x\n", card->name, cq->op);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int
+w6692_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct bchannel *bch = container_of(ch, struct bchannel, ch);
+ struct w6692_ch *bc = container_of(bch, struct w6692_ch, bch);
+ struct w6692_hw *card = bch->hw;
+ int ret = -EINVAL;
+ u_long flags;
+
+ pr_debug("%s: %s cmd:%x %p\n", card->name, __func__, cmd, arg);
+ switch (cmd) {
+ case CLOSE_CHANNEL:
+ test_and_clear_bit(FLG_OPEN, &bch->Flags);
+ if (test_bit(FLG_ACTIVE, &bch->Flags)) {
+ spin_lock_irqsave(&card->lock, flags);
+ mISDN_freebchannel(bch);
+ w6692_mode(bc, ISDN_P_NONE);
+ spin_unlock_irqrestore(&card->lock, flags);
+ } else {
+ skb_queue_purge(&bch->rqueue);
+ bch->rcount = 0;
+ }
+ ch->protocol = ISDN_P_NONE;
+ ch->peer = NULL;
+ module_put(THIS_MODULE);
+ ret = 0;
+ break;
+ case CONTROL_CHANNEL:
+ ret = channel_bctrl(bch, arg);
+ break;
+ default:
+ pr_info("%s: %s unknown prim(%x)\n",
+ card->name, __func__, cmd);
+ }
+ return ret;
+}
+
+static int
+w6692_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct w6692_hw *card = container_of(dch, struct w6692_hw, dch);
+ int ret = -EINVAL;
+ struct mISDNhead *hh = mISDN_HEAD_P(skb);
+ u32 id;
+ u_long flags;
+
+ switch (hh->prim) {
+ case PH_DATA_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ ret = dchannel_senddata(dch, skb);
+ if (ret > 0) { /* direct TX */
+ id = hh->id; /* skb can be freed */
+ W6692_fill_Dfifo(card);
+ ret = 0;
+ spin_unlock_irqrestore(&card->lock, flags);
+ queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+ } else
+ spin_unlock_irqrestore(&card->lock, flags);
+ return ret;
+ case PH_ACTIVATE_REQ:
+ ret = l1_event(dch->l1, hh->prim);
+ break;
+ case PH_DEACTIVATE_REQ:
+ test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+ ret = l1_event(dch->l1, hh->prim);
+ break;
+ }
+
+ if (!ret)
+ dev_kfree_skb(skb);
+ return ret;
+}
+
+static int
+w6692_l1callback(struct dchannel *dch, u32 cmd)
+{
+ struct w6692_hw *card = container_of(dch, struct w6692_hw, dch);
+ u_long flags;
+
+ pr_debug("%s: cmd(%x) state(%02x)\n", card->name, cmd, card->state);
+ switch (cmd) {
+ case INFO3_P8:
+ spin_lock_irqsave(&card->lock, flags);
+ ph_command(card, W_L1CMD_AR8);
+ spin_unlock_irqrestore(&card->lock, flags);
+ break;
+ case INFO3_P10:
+ spin_lock_irqsave(&card->lock, flags);
+ ph_command(card, W_L1CMD_AR10);
+ spin_unlock_irqrestore(&card->lock, flags);
+ break;
+ case HW_RESET_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ if (card->state != W_L1IND_DRD)
+ ph_command(card, W_L1CMD_RST);
+ ph_command(card, W_L1CMD_ECK);
+ spin_unlock_irqrestore(&card->lock, flags);
+ break;
+ case HW_DEACT_REQ:
+ skb_queue_purge(&dch->squeue);
+ if (dch->tx_skb) {
+ dev_kfree_skb(dch->tx_skb);
+ dch->tx_skb = NULL;
+ }
+ dch->tx_idx = 0;
+ if (dch->rx_skb) {
+ dev_kfree_skb(dch->rx_skb);
+ dch->rx_skb = NULL;
+ }
+ test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+ if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+ del_timer(&dch->timer);
+ break;
+ case HW_POWERUP_REQ:
+ spin_lock_irqsave(&card->lock, flags);
+ ph_command(card, W_L1CMD_ECK);
+ spin_unlock_irqrestore(&card->lock, flags);
+ break;
+ case PH_ACTIVATE_IND:
+ test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+ _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+ GFP_ATOMIC);
+ break;
+ case PH_DEACTIVATE_IND:
+ test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+ _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+ GFP_ATOMIC);
+ break;
+ default:
+ pr_debug("%s: %s unknown command %x\n", card->name,
+ __func__, cmd);
+ return -1;
+ }
+ return 0;
+}
+
+static int
+open_dchannel(struct w6692_hw *card, struct channel_req *rq)
+{
+ pr_debug("%s: %s dev(%d) open from %p\n", card->name, __func__,
+ card->dch.dev.id, __builtin_return_address(1));
+ if (rq->protocol != ISDN_P_TE_S0)
+ return -EINVAL;
+ if (rq->adr.channel == 1)
+ /* E-Channel not supported */
+ return -EINVAL;
+ rq->ch = &card->dch.dev.D;
+ rq->ch->protocol = rq->protocol;
+ if (card->dch.state == 7)
+ _queue_data(rq->ch, PH_ACTIVATE_IND, MISDN_ID_ANY,
+ 0, NULL, GFP_KERNEL);
+ return 0;
+}
+
+static int
+w6692_dctrl(struct mISDNchannel *ch, u32 cmd, void *arg)
+{
+ struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
+ struct dchannel *dch = container_of(dev, struct dchannel, dev);
+ struct w6692_hw *card = container_of(dch, struct w6692_hw, dch);
+ struct channel_req *rq;
+ int err = 0;
+
+ pr_debug("%s: DCTRL: %x %p\n", card->name, cmd, arg);
+ switch (cmd) {
+ case OPEN_CHANNEL:
+ rq = arg;
+ if (rq->protocol == ISDN_P_TE_S0)
+ err = open_dchannel(card, rq);
+ else
+ err = open_bchannel(card, rq);
+ if (err)
+ break;
+ if (!try_module_get(THIS_MODULE))
+ pr_info("%s: cannot get module\n", card->name);
+ break;
+ case CLOSE_CHANNEL:
+ pr_debug("%s: dev(%d) close from %p\n", card->name,
+ dch->dev.id, __builtin_return_address(0));
+ module_put(THIS_MODULE);
+ break;
+ case CONTROL_CHANNEL:
+ err = channel_ctrl(card, arg);
+ break;
+ default:
+ pr_debug("%s: unknown DCTRL command %x\n", card->name, cmd);
+ return -EINVAL;
+ }
+ return err;
+}
+
+static int
+setup_w6692(struct w6692_hw *card)
+{
+ u32 val;
+
+ if (!request_region(card->addr, 256, card->name)) {
+ pr_info("%s: config port %x-%x already in use\n", card->name,
+ card->addr, card->addr + 255);
+ return -EIO;
+ }
+ W6692Version(card);
+ card->bc[0].addr = card->addr;
+ card->bc[1].addr = card->addr + 0x40;
+ val = ReadW6692(card, W_ISTA);
+ if (debug & DEBUG_HW)
+ pr_notice("%s ISTA=%02x\n", card->name, val);
+ val = ReadW6692(card, W_IMASK);
+ if (debug & DEBUG_HW)
+ pr_notice("%s IMASK=%02x\n", card->name, val);
+ val = ReadW6692(card, W_D_EXIR);
+ if (debug & DEBUG_HW)
+ pr_notice("%s D_EXIR=%02x\n", card->name, val);
+ val = ReadW6692(card, W_D_EXIM);
+ if (debug & DEBUG_HW)
+ pr_notice("%s D_EXIM=%02x\n", card->name, val);
+ val = ReadW6692(card, W_D_RSTA);
+ if (debug & DEBUG_HW)
+ pr_notice("%s D_RSTA=%02x\n", card->name, val);
+ return 0;
+}
+
+static void
+release_card(struct w6692_hw *card)
+{
+ u_long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ disable_hwirq(card);
+ w6692_mode(&card->bc[0], ISDN_P_NONE);
+ w6692_mode(&card->bc[1], ISDN_P_NONE);
+ if ((card->fmask & led) || card->subtype == W6692_USR) {
+ card->xdata |= 0x04; /* LED OFF */
+ WriteW6692(card, W_XDATA, card->xdata);
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+ free_irq(card->irq, card);
+ l1_event(card->dch.l1, CLOSE_CHANNEL);
+ mISDN_unregister_device(&card->dch.dev);
+ release_region(card->addr, 256);
+ mISDN_freebchannel(&card->bc[1].bch);
+ mISDN_freebchannel(&card->bc[0].bch);
+ mISDN_freedchannel(&card->dch);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ pci_disable_device(card->pdev);
+ pci_set_drvdata(card->pdev, NULL);
+ kfree(card);
+}
+
+static int
+setup_instance(struct w6692_hw *card)
+{
+ int i, err;
+ u_long flags;
+
+ snprintf(card->name, MISDN_MAX_IDLEN - 1, "w6692.%d", w6692_cnt + 1);
+ write_lock_irqsave(&card_lock, flags);
+ list_add_tail(&card->list, &Cards);
+ write_unlock_irqrestore(&card_lock, flags);
+ card->fmask = (1 << w6692_cnt);
+ _set_debug(card);
+ spin_lock_init(&card->lock);
+ mISDN_initdchannel(&card->dch, MAX_DFRAME_LEN_L1, W6692_ph_bh);
+ card->dch.dev.Dprotocols = (1 << ISDN_P_TE_S0);
+ card->dch.dev.D.send = w6692_l2l1D;
+ card->dch.dev.D.ctrl = w6692_dctrl;
+ card->dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+ (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+ card->dch.hw = card;
+ card->dch.dev.nrbchan = 2;
+ for (i = 0; i < 2; i++) {
+ mISDN_initbchannel(&card->bc[i].bch, MAX_DATA_MEM);
+ card->bc[i].bch.hw = card;
+ card->bc[i].bch.nr = i + 1;
+ card->bc[i].bch.ch.nr = i + 1;
+ card->bc[i].bch.ch.send = w6692_l2l1B;
+ card->bc[i].bch.ch.ctrl = w6692_bctrl;
+ set_channelmap(i + 1, card->dch.dev.channelmap);
+ list_add(&card->bc[i].bch.ch.list, &card->dch.dev.bchannels);
+ }
+ err = setup_w6692(card);
+ if (err)
+ goto error_setup;
+ err = mISDN_register_device(&card->dch.dev, &card->pdev->dev,
+ card->name);
+ if (err)
+ goto error_reg;
+ err = init_card(card);
+ if (err)
+ goto error_init;
+ err = create_l1(&card->dch, w6692_l1callback);
+ if (!err) {
+ w6692_cnt++;
+ pr_notice("W6692 %d cards installed\n", w6692_cnt);
+ return 0;
+ }
+
+ free_irq(card->irq, card);
+error_init:
+ mISDN_unregister_device(&card->dch.dev);
+error_reg:
+ release_region(card->addr, 256);
+error_setup:
+ mISDN_freebchannel(&card->bc[1].bch);
+ mISDN_freebchannel(&card->bc[0].bch);
+ mISDN_freedchannel(&card->dch);
+ write_lock_irqsave(&card_lock, flags);
+ list_del(&card->list);
+ write_unlock_irqrestore(&card_lock, flags);
+ kfree(card);
+ return err;
+}
+
+static int __devinit
+w6692_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = -ENOMEM;
+ struct w6692_hw *card;
+ struct w6692map *m = (struct w6692map *)ent->driver_data;
+
+ card = kzalloc(sizeof(struct w6692_hw), GFP_KERNEL);
+ if (!card) {
+ pr_info("No kmem for w6692 card\n");
+ return err;
+ }
+ card->pdev = pdev;
+ card->subtype = m->subtype;
+ err = pci_enable_device(pdev);
+ if (err) {
+ kfree(card);
+ return err;
+ }
+
+ printk(KERN_INFO "mISDN_w6692: found adapter %s at %s\n",
+ m->name, pci_name(pdev));
+
+ card->addr = pci_resource_start(pdev, 1);
+ card->irq = pdev->irq;
+ pci_set_drvdata(pdev, card);
+ err = setup_instance(card);
+ if (err)
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void __devexit
+w6692_remove_pci(struct pci_dev *pdev)
+{
+ struct w6692_hw *card = pci_get_drvdata(pdev);
+
+ if (card)
+ release_card(card);
+ else
+ if (debug)
+ pr_notice("%s: drvdata allready removed\n", __func__);
+}
+
+static struct pci_device_id w6692_ids[] = {
+ { PCI_VENDOR_ID_DYNALINK, PCI_DEVICE_ID_DYNALINK_IS64PH,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, (ulong)&w6692_map[0]},
+ { PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_6692,
+ PCI_VENDOR_ID_USR, PCI_DEVICE_ID_USR_6692, 0, 0,
+ (ulong)&w6692_map[2]},
+ { PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_6692,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, (ulong)&w6692_map[1]},
+ { }
+};
+MODULE_DEVICE_TABLE(pci, w6692_ids);
+
+static struct pci_driver w6692_driver = {
+ .name = "w6692",
+ .probe = w6692_probe,
+ .remove = __devexit_p(w6692_remove_pci),
+ .id_table = w6692_ids,
+};
+
+static int __init w6692_init(void)
+{
+ int err;
+
+ pr_notice("Winbond W6692 PCI driver Rev. %s\n", W6692_REV);
+
+ err = pci_register_driver(&w6692_driver);
+ return err;
+}
+
+static void __exit w6692_cleanup(void)
+{
+ pci_unregister_driver(&w6692_driver);
+}
+
+module_init(w6692_init);
+module_exit(w6692_cleanup);
diff --git a/drivers/isdn/hardware/mISDN/w6692.h b/drivers/isdn/hardware/mISDN/w6692.h
new file mode 100644
index 0000000..f956977
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/w6692.h
@@ -0,0 +1,190 @@
+/*
+ * Winbond W6692 specific defines
+ *
+ * Author Karsten Keil <keil@isdn4linux.de>
+ * based on the w6692 I4L driver from Petr Novak <petr.novak@i.cz>
+ *
+ * Copyright 2009 by Karsten Keil <keil@isdn4linux.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* Specifications of W6692 registers */
+
+#define W_D_RFIFO 0x00 /* R */
+#define W_D_XFIFO 0x04 /* W */
+#define W_D_CMDR 0x08 /* W */
+#define W_D_MODE 0x0c /* R/W */
+#define W_D_TIMR 0x10 /* R/W */
+#define W_ISTA 0x14 /* R_clr */
+#define W_IMASK 0x18 /* R/W */
+#define W_D_EXIR 0x1c /* R_clr */
+#define W_D_EXIM 0x20 /* R/W */
+#define W_D_STAR 0x24 /* R */
+#define W_D_RSTA 0x28 /* R */
+#define W_D_SAM 0x2c /* R/W */
+#define W_D_SAP1 0x30 /* R/W */
+#define W_D_SAP2 0x34 /* R/W */
+#define W_D_TAM 0x38 /* R/W */
+#define W_D_TEI1 0x3c /* R/W */
+#define W_D_TEI2 0x40 /* R/W */
+#define W_D_RBCH 0x44 /* R */
+#define W_D_RBCL 0x48 /* R */
+#define W_TIMR2 0x4c /* W */
+#define W_L1_RC 0x50 /* R/W */
+#define W_D_CTL 0x54 /* R/W */
+#define W_CIR 0x58 /* R */
+#define W_CIX 0x5c /* W */
+#define W_SQR 0x60 /* R */
+#define W_SQX 0x64 /* W */
+#define W_PCTL 0x68 /* R/W */
+#define W_MOR 0x6c /* R */
+#define W_MOX 0x70 /* R/W */
+#define W_MOSR 0x74 /* R_clr */
+#define W_MOCR 0x78 /* R/W */
+#define W_GCR 0x7c /* R/W */
+
+#define W_B_RFIFO 0x80 /* R */
+#define W_B_XFIFO 0x84 /* W */
+#define W_B_CMDR 0x88 /* W */
+#define W_B_MODE 0x8c /* R/W */
+#define W_B_EXIR 0x90 /* R_clr */
+#define W_B_EXIM 0x94 /* R/W */
+#define W_B_STAR 0x98 /* R */
+#define W_B_ADM1 0x9c /* R/W */
+#define W_B_ADM2 0xa0 /* R/W */
+#define W_B_ADR1 0xa4 /* R/W */
+#define W_B_ADR2 0xa8 /* R/W */
+#define W_B_RBCL 0xac /* R */
+#define W_B_RBCH 0xb0 /* R */
+
+#define W_XADDR 0xf4 /* R/W */
+#define W_XDATA 0xf8 /* R/W */
+#define W_EPCTL 0xfc /* W */
+
+/* W6692 register bits */
+
+#define W_D_CMDR_XRST 0x01
+#define W_D_CMDR_XME 0x02
+#define W_D_CMDR_XMS 0x08
+#define W_D_CMDR_STT 0x10
+#define W_D_CMDR_RRST 0x40
+#define W_D_CMDR_RACK 0x80
+
+#define W_D_MODE_RLP 0x01
+#define W_D_MODE_DLP 0x02
+#define W_D_MODE_MFD 0x04
+#define W_D_MODE_TEE 0x08
+#define W_D_MODE_TMS 0x10
+#define W_D_MODE_RACT 0x40
+#define W_D_MODE_MMS 0x80
+
+#define W_INT_B2_EXI 0x01
+#define W_INT_B1_EXI 0x02
+#define W_INT_D_EXI 0x04
+#define W_INT_XINT0 0x08
+#define W_INT_XINT1 0x10
+#define W_INT_D_XFR 0x20
+#define W_INT_D_RME 0x40
+#define W_INT_D_RMR 0x80
+
+#define W_D_EXI_WEXP 0x01
+#define W_D_EXI_TEXP 0x02
+#define W_D_EXI_ISC 0x04
+#define W_D_EXI_MOC 0x08
+#define W_D_EXI_TIN2 0x10
+#define W_D_EXI_XCOL 0x20
+#define W_D_EXI_XDUN 0x40
+#define W_D_EXI_RDOV 0x80
+
+#define W_D_STAR_DRDY 0x10
+#define W_D_STAR_XBZ 0x20
+#define W_D_STAR_XDOW 0x80
+
+#define W_D_RSTA_RMB 0x10
+#define W_D_RSTA_CRCE 0x20
+#define W_D_RSTA_RDOV 0x40
+
+#define W_D_CTL_SRST 0x20
+
+#define W_CIR_SCC 0x80
+#define W_CIR_ICC 0x40
+#define W_CIR_COD_MASK 0x0f
+
+#define W_PCTL_PCX 0x01
+#define W_PCTL_XMODE 0x02
+#define W_PCTL_OE0 0x04
+#define W_PCTL_OE1 0x08
+#define W_PCTL_OE2 0x10
+#define W_PCTL_OE3 0x20
+#define W_PCTL_OE4 0x40
+#define W_PCTL_OE5 0x80
+
+#define W_B_CMDR_XRST 0x01
+#define W_B_CMDR_XME 0x02
+#define W_B_CMDR_XMS 0x04
+#define W_B_CMDR_RACT 0x20
+#define W_B_CMDR_RRST 0x40
+#define W_B_CMDR_RACK 0x80
+
+#define W_B_MODE_FTS0 0x01
+#define W_B_MODE_FTS1 0x02
+#define W_B_MODE_SW56 0x04
+#define W_B_MODE_BSW0 0x08
+#define W_B_MODE_BSW1 0x10
+#define W_B_MODE_EPCM 0x20
+#define W_B_MODE_ITF 0x40
+#define W_B_MODE_MMS 0x80
+
+#define W_B_EXI_XDUN 0x01
+#define W_B_EXI_XFR 0x02
+#define W_B_EXI_RDOV 0x10
+#define W_B_EXI_RME 0x20
+#define W_B_EXI_RMR 0x40
+
+#define W_B_STAR_XBZ 0x01
+#define W_B_STAR_XDOW 0x04
+#define W_B_STAR_RMB 0x10
+#define W_B_STAR_CRCE 0x20
+#define W_B_STAR_RDOV 0x40
+
+#define W_B_RBCH_LOV 0x20
+
+/* W6692 Layer1 commands */
+
+#define W_L1CMD_ECK 0x00
+#define W_L1CMD_RST 0x01
+#define W_L1CMD_SCP 0x04
+#define W_L1CMD_SSP 0x02
+#define W_L1CMD_AR8 0x08
+#define W_L1CMD_AR10 0x09
+#define W_L1CMD_EAL 0x0a
+#define W_L1CMD_DRC 0x0f
+
+/* W6692 Layer1 indications */
+
+#define W_L1IND_CE 0x07
+#define W_L1IND_DRD 0x00
+#define W_L1IND_LD 0x04
+#define W_L1IND_ARD 0x08
+#define W_L1IND_TI 0x0a
+#define W_L1IND_ATI 0x0b
+#define W_L1IND_AI8 0x0c
+#define W_L1IND_AI10 0x0d
+#define W_L1IND_CD 0x0f
+
+/* FIFO thresholds */
+#define W_D_FIFO_THRESH 64
+#define W_B_FIFO_THRESH 64
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 7832d8b..3464ebc 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -391,6 +391,7 @@
config HISAX_ST5481
tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
+ select ISDN_HDLC
select CRC_CCITT
select BITREVERSE
help
@@ -418,11 +419,6 @@
(the latter also needs you to select "ISA Plug and Play support"
from the menu "Plug and Play configuration")
-config HISAX_HDLC
- bool
- depends on HISAX_ST5481
- default y
-
config HISAX_AVM_A1_PCMCIA
bool
depends on HISAX_AVM_A1_CS
diff --git a/drivers/isdn/hisax/Makefile b/drivers/isdn/hisax/Makefile
index c7a3794..ab638b08 100644
--- a/drivers/isdn/hisax/Makefile
+++ b/drivers/isdn/hisax/Makefile
@@ -16,10 +16,6 @@
obj-$(CONFIG_HISAX_HFC4S8S) += hfc4s8s_l1.o
obj-$(CONFIG_HISAX_FRITZ_PCIPNP) += hisax_isac.o hisax_fcpcipnp.o
-ifdef CONFIG_HISAX_HDLC
-obj-$(CONFIG_ISDN_DRV_HISAX) += isdnhdlc.o
-endif
-
# Multipart objects.
hisax_st5481-y := st5481_init.o st5481_usb.o st5481_d.o \
diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c
index 341faf5..bf526a7a 100644
--- a/drivers/isdn/hisax/amd7930_fn.c
+++ b/drivers/isdn/hisax/amd7930_fn.c
@@ -238,8 +238,6 @@
container_of(work, struct IsdnCardState, tqueue);
struct PStack *stptr;
- if (!cs)
- return;
if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
if (cs->debug)
debugl1(cs, "Amd7930: bh, D-Channel Busy cleared");
diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c
index 025a20d..475b1a0 100644
--- a/drivers/isdn/hisax/callc.c
+++ b/drivers/isdn/hisax/callc.c
@@ -833,8 +833,6 @@
};
/* *INDENT-ON* */
-#define FNCOUNT (sizeof(fnlist)/sizeof(struct FsmNode))
-
int __init
CallcNew(void)
{
@@ -842,7 +840,7 @@
callcfsm.event_count = EVENT_COUNT;
callcfsm.strEvent = strEvent;
callcfsm.strState = strState;
- return FsmNew(&callcfsm, fnlist, FNCOUNT);
+ return FsmNew(&callcfsm, fnlist, ARRAY_SIZE(fnlist));
}
void
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 3d337d9..d110a77 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1506,8 +1506,6 @@
u_long flags;
// struct PStack *stptr;
- if (!cs)
- return;
if (test_and_clear_bit(D_L1STATECHANGE, &cs->event)) {
if (!cs->hw.hfcpci.nt_mode)
switch (cs->dc.hfcpci.ph_state) {
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index d92e8d6..419f87c 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -1255,8 +1255,6 @@
container_of(work, struct IsdnCardState, tqueue);
u_long flags;
- if (!cs)
- return;
if (test_and_clear_bit(D_L1STATECHANGE, &cs->event)) {
if (!cs->hw.hfcsx.nt_mode)
switch (cs->dc.hfcsx.ph_state) {
diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c
index 682cac3..9aba646 100644
--- a/drivers/isdn/hisax/icc.c
+++ b/drivers/isdn/hisax/icc.c
@@ -83,8 +83,6 @@
container_of(work, struct IsdnCardState, tqueue);
struct PStack *stptr;
- if (!cs)
- return;
if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
if (cs->debug)
debugl1(cs, "D-Channel Busy cleared");
diff --git a/drivers/isdn/hisax/isac.c b/drivers/isdn/hisax/isac.c
index 07b1673..a19354d 100644
--- a/drivers/isdn/hisax/isac.c
+++ b/drivers/isdn/hisax/isac.c
@@ -86,8 +86,6 @@
container_of(work, struct IsdnCardState, tqueue);
struct PStack *stptr;
- if (!cs)
- return;
if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
if (cs->debug)
debugl1(cs, "D-Channel Busy cleared");
diff --git a/drivers/isdn/hisax/isdnhdlc.c b/drivers/isdn/hisax/isdnhdlc.c
deleted file mode 100644
index c69a77a..0000000
--- a/drivers/isdn/hisax/isdnhdlc.c
+++ /dev/null
@@ -1,603 +0,0 @@
-/*
- * isdnhdlc.c -- General purpose ISDN HDLC decoder.
- *
- *Copyright (C) 2002 Wolfgang Mües <wolfgang@iksw-muees.de>
- * 2001 Frode Isaksen <fisaksen@bewan.com>
- * 2001 Kai Germaschewski <kai.germaschewski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/crc-ccitt.h>
-#include "isdnhdlc.h"
-
-/*-------------------------------------------------------------------*/
-
-MODULE_AUTHOR("Wolfgang Mües <wolfgang@iksw-muees.de>, "
- "Frode Isaksen <fisaksen@bewan.com>, "
- "Kai Germaschewski <kai.germaschewski@gmx.de>");
-MODULE_DESCRIPTION("General purpose ISDN HDLC decoder");
-MODULE_LICENSE("GPL");
-
-/*-------------------------------------------------------------------*/
-
-enum {
- HDLC_FAST_IDLE,HDLC_GET_FLAG_B0,HDLC_GETFLAG_B1A6,HDLC_GETFLAG_B7,
- HDLC_GET_DATA,HDLC_FAST_FLAG
-};
-
-enum {
- HDLC_SEND_DATA,HDLC_SEND_CRC1,HDLC_SEND_FAST_FLAG,
- HDLC_SEND_FIRST_FLAG,HDLC_SEND_CRC2,HDLC_SEND_CLOSING_FLAG,
- HDLC_SEND_IDLE1,HDLC_SEND_FAST_IDLE,HDLC_SENDFLAG_B0,
- HDLC_SENDFLAG_B1A6,HDLC_SENDFLAG_B7,STOPPED
-};
-
-void isdnhdlc_rcv_init (struct isdnhdlc_vars *hdlc, int do_adapt56)
-{
- hdlc->bit_shift = 0;
- hdlc->hdlc_bits1 = 0;
- hdlc->data_bits = 0;
- hdlc->ffbit_shift = 0;
- hdlc->data_received = 0;
- hdlc->state = HDLC_GET_DATA;
- hdlc->do_adapt56 = do_adapt56;
- hdlc->dchannel = 0;
- hdlc->crc = 0;
- hdlc->cbin = 0;
- hdlc->shift_reg = 0;
- hdlc->ffvalue = 0;
- hdlc->dstpos = 0;
-}
-
-void isdnhdlc_out_init (struct isdnhdlc_vars *hdlc, int is_d_channel, int do_adapt56)
-{
- hdlc->bit_shift = 0;
- hdlc->hdlc_bits1 = 0;
- hdlc->data_bits = 0;
- hdlc->ffbit_shift = 0;
- hdlc->data_received = 0;
- hdlc->do_closing = 0;
- hdlc->ffvalue = 0;
- if (is_d_channel) {
- hdlc->dchannel = 1;
- hdlc->state = HDLC_SEND_FIRST_FLAG;
- } else {
- hdlc->dchannel = 0;
- hdlc->state = HDLC_SEND_FAST_FLAG;
- hdlc->ffvalue = 0x7e;
- }
- hdlc->cbin = 0x7e;
- hdlc->bit_shift = 0;
- if(do_adapt56){
- hdlc->do_adapt56 = 1;
- hdlc->data_bits = 0;
- hdlc->state = HDLC_SENDFLAG_B0;
- } else {
- hdlc->do_adapt56 = 0;
- hdlc->data_bits = 8;
- }
- hdlc->shift_reg = 0;
-}
-
-/*
- isdnhdlc_decode - decodes HDLC frames from a transparent bit stream.
-
- The source buffer is scanned for valid HDLC frames looking for
- flags (01111110) to indicate the start of a frame. If the start of
- the frame is found, the bit stuffing is removed (0 after 5 1's).
- When a new flag is found, the complete frame has been received
- and the CRC is checked.
- If a valid frame is found, the function returns the frame length
- excluding the CRC with the bit HDLC_END_OF_FRAME set.
- If the beginning of a valid frame is found, the function returns
- the length.
- If a framing error is found (too many 1s and not a flag) the function
- returns the length with the bit HDLC_FRAMING_ERROR set.
- If a CRC error is found the function returns the length with the
- bit HDLC_CRC_ERROR set.
- If the frame length exceeds the destination buffer size, the function
- returns the length with the bit HDLC_LENGTH_ERROR set.
-
- src - source buffer
- slen - source buffer length
- count - number of bytes removed (decoded) from the source buffer
- dst _ destination buffer
- dsize - destination buffer size
- returns - number of decoded bytes in the destination buffer and status
- flag.
- */
-int isdnhdlc_decode (struct isdnhdlc_vars *hdlc, const unsigned char *src,
- int slen, int *count, unsigned char *dst, int dsize)
-{
- int status=0;
-
- static const unsigned char fast_flag[]={
- 0x00,0x00,0x00,0x20,0x30,0x38,0x3c,0x3e,0x3f
- };
-
- static const unsigned char fast_flag_value[]={
- 0x00,0x7e,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f
- };
-
- static const unsigned char fast_abort[]={
- 0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff
- };
-
- *count = slen;
-
- while(slen > 0){
- if(hdlc->bit_shift==0){
- hdlc->cbin = *src++;
- slen--;
- hdlc->bit_shift = 8;
- if(hdlc->do_adapt56){
- hdlc->bit_shift --;
- }
- }
-
- switch(hdlc->state){
- case STOPPED:
- return 0;
- case HDLC_FAST_IDLE:
- if(hdlc->cbin == 0xff){
- hdlc->bit_shift = 0;
- break;
- }
- hdlc->state = HDLC_GET_FLAG_B0;
- hdlc->hdlc_bits1 = 0;
- hdlc->bit_shift = 8;
- break;
- case HDLC_GET_FLAG_B0:
- if(!(hdlc->cbin & 0x80)) {
- hdlc->state = HDLC_GETFLAG_B1A6;
- hdlc->hdlc_bits1 = 0;
- } else {
- if(!hdlc->do_adapt56){
- if(++hdlc->hdlc_bits1 >=8 ) if(hdlc->bit_shift==1)
- hdlc->state = HDLC_FAST_IDLE;
- }
- }
- hdlc->cbin<<=1;
- hdlc->bit_shift --;
- break;
- case HDLC_GETFLAG_B1A6:
- if(hdlc->cbin & 0x80){
- hdlc->hdlc_bits1++;
- if(hdlc->hdlc_bits1==6){
- hdlc->state = HDLC_GETFLAG_B7;
- }
- } else {
- hdlc->hdlc_bits1 = 0;
- }
- hdlc->cbin<<=1;
- hdlc->bit_shift --;
- break;
- case HDLC_GETFLAG_B7:
- if(hdlc->cbin & 0x80) {
- hdlc->state = HDLC_GET_FLAG_B0;
- } else {
- hdlc->state = HDLC_GET_DATA;
- hdlc->crc = 0xffff;
- hdlc->shift_reg = 0;
- hdlc->hdlc_bits1 = 0;
- hdlc->data_bits = 0;
- hdlc->data_received = 0;
- }
- hdlc->cbin<<=1;
- hdlc->bit_shift --;
- break;
- case HDLC_GET_DATA:
- if(hdlc->cbin & 0x80){
- hdlc->hdlc_bits1++;
- switch(hdlc->hdlc_bits1){
- case 6:
- break;
- case 7:
- if(hdlc->data_received) {
- // bad frame
- status = -HDLC_FRAMING_ERROR;
- }
- if(!hdlc->do_adapt56){
- if(hdlc->cbin==fast_abort[hdlc->bit_shift+1]){
- hdlc->state = HDLC_FAST_IDLE;
- hdlc->bit_shift=1;
- break;
- }
- } else {
- hdlc->state = HDLC_GET_FLAG_B0;
- }
- break;
- default:
- hdlc->shift_reg>>=1;
- hdlc->shift_reg |= 0x80;
- hdlc->data_bits++;
- break;
- }
- } else {
- switch(hdlc->hdlc_bits1){
- case 5:
- break;
- case 6:
- if(hdlc->data_received){
- if (hdlc->dstpos < 2) {
- status = -HDLC_FRAMING_ERROR;
- } else if (hdlc->crc != 0xf0b8){
- // crc error
- status = -HDLC_CRC_ERROR;
- } else {
- // remove CRC
- hdlc->dstpos -= 2;
- // good frame
- status = hdlc->dstpos;
- }
- }
- hdlc->crc = 0xffff;
- hdlc->shift_reg = 0;
- hdlc->data_bits = 0;
- if(!hdlc->do_adapt56){
- if(hdlc->cbin==fast_flag[hdlc->bit_shift]){
- hdlc->ffvalue = fast_flag_value[hdlc->bit_shift];
- hdlc->state = HDLC_FAST_FLAG;
- hdlc->ffbit_shift = hdlc->bit_shift;
- hdlc->bit_shift = 1;
- } else {
- hdlc->state = HDLC_GET_DATA;
- hdlc->data_received = 0;
- }
- } else {
- hdlc->state = HDLC_GET_DATA;
- hdlc->data_received = 0;
- }
- break;
- default:
- hdlc->shift_reg>>=1;
- hdlc->data_bits++;
- break;
- }
- hdlc->hdlc_bits1 = 0;
- }
- if (status) {
- hdlc->dstpos = 0;
- *count -= slen;
- hdlc->cbin <<= 1;
- hdlc->bit_shift--;
- return status;
- }
- if(hdlc->data_bits==8){
- hdlc->data_bits = 0;
- hdlc->data_received = 1;
- hdlc->crc = crc_ccitt_byte(hdlc->crc, hdlc->shift_reg);
-
- // good byte received
- if (hdlc->dstpos < dsize) {
- dst[hdlc->dstpos++] = hdlc->shift_reg;
- } else {
- // frame too long
- status = -HDLC_LENGTH_ERROR;
- hdlc->dstpos = 0;
- }
- }
- hdlc->cbin <<= 1;
- hdlc->bit_shift--;
- break;
- case HDLC_FAST_FLAG:
- if(hdlc->cbin==hdlc->ffvalue){
- hdlc->bit_shift = 0;
- break;
- } else {
- if(hdlc->cbin == 0xff){
- hdlc->state = HDLC_FAST_IDLE;
- hdlc->bit_shift=0;
- } else if(hdlc->ffbit_shift==8){
- hdlc->state = HDLC_GETFLAG_B7;
- break;
- } else {
- hdlc->shift_reg = fast_abort[hdlc->ffbit_shift-1];
- hdlc->hdlc_bits1 = hdlc->ffbit_shift-2;
- if(hdlc->hdlc_bits1<0)hdlc->hdlc_bits1 = 0;
- hdlc->data_bits = hdlc->ffbit_shift-1;
- hdlc->state = HDLC_GET_DATA;
- hdlc->data_received = 0;
- }
- }
- break;
- default:
- break;
- }
- }
- *count -= slen;
- return 0;
-}
-
-/*
- isdnhdlc_encode - encodes HDLC frames to a transparent bit stream.
-
- The bit stream starts with a beginning flag (01111110). After
- that each byte is added to the bit stream with bit stuffing added
- (0 after 5 1's).
- When the last byte has been removed from the source buffer, the
- CRC (2 bytes is added) and the frame terminates with the ending flag.
- For the dchannel, the idle character (all 1's) is also added at the end.
- If this function is called with empty source buffer (slen=0), flags or
- idle character will be generated.
-
- src - source buffer
- slen - source buffer length
- count - number of bytes removed (encoded) from source buffer
- dst _ destination buffer
- dsize - destination buffer size
- returns - number of encoded bytes in the destination buffer
-*/
-int isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const unsigned char *src,
- unsigned short slen, int *count,
- unsigned char *dst, int dsize)
-{
- static const unsigned char xfast_flag_value[] = {
- 0x7e,0x3f,0x9f,0xcf,0xe7,0xf3,0xf9,0xfc,0x7e
- };
-
- int len = 0;
-
- *count = slen;
-
- while (dsize > 0) {
- if(hdlc->bit_shift==0){
- if(slen && !hdlc->do_closing){
- hdlc->shift_reg = *src++;
- slen--;
- if (slen == 0)
- hdlc->do_closing = 1; /* closing sequence, CRC + flag(s) */
- hdlc->bit_shift = 8;
- } else {
- if(hdlc->state == HDLC_SEND_DATA){
- if(hdlc->data_received){
- hdlc->state = HDLC_SEND_CRC1;
- hdlc->crc ^= 0xffff;
- hdlc->bit_shift = 8;
- hdlc->shift_reg = hdlc->crc & 0xff;
- } else if(!hdlc->do_adapt56){
- hdlc->state = HDLC_SEND_FAST_FLAG;
- } else {
- hdlc->state = HDLC_SENDFLAG_B0;
- }
- }
-
- }
- }
-
- switch(hdlc->state){
- case STOPPED:
- while (dsize--)
- *dst++ = 0xff;
-
- return dsize;
- case HDLC_SEND_FAST_FLAG:
- hdlc->do_closing = 0;
- if(slen == 0){
- *dst++ = hdlc->ffvalue;
- len++;
- dsize--;
- break;
- }
- if(hdlc->bit_shift==8){
- hdlc->cbin = hdlc->ffvalue>>(8-hdlc->data_bits);
- hdlc->state = HDLC_SEND_DATA;
- hdlc->crc = 0xffff;
- hdlc->hdlc_bits1 = 0;
- hdlc->data_received = 1;
- }
- break;
- case HDLC_SENDFLAG_B0:
- hdlc->do_closing = 0;
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- hdlc->hdlc_bits1 = 0;
- hdlc->state = HDLC_SENDFLAG_B1A6;
- break;
- case HDLC_SENDFLAG_B1A6:
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- hdlc->cbin++;
- if(++hdlc->hdlc_bits1 == 6)
- hdlc->state = HDLC_SENDFLAG_B7;
- break;
- case HDLC_SENDFLAG_B7:
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- if(slen == 0){
- hdlc->state = HDLC_SENDFLAG_B0;
- break;
- }
- if(hdlc->bit_shift==8){
- hdlc->state = HDLC_SEND_DATA;
- hdlc->crc = 0xffff;
- hdlc->hdlc_bits1 = 0;
- hdlc->data_received = 1;
- }
- break;
- case HDLC_SEND_FIRST_FLAG:
- hdlc->data_received = 1;
- if(hdlc->data_bits==8){
- hdlc->state = HDLC_SEND_DATA;
- hdlc->crc = 0xffff;
- hdlc->hdlc_bits1 = 0;
- break;
- }
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- if(hdlc->shift_reg & 0x01)
- hdlc->cbin++;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- if(hdlc->bit_shift==0){
- hdlc->state = HDLC_SEND_DATA;
- hdlc->crc = 0xffff;
- hdlc->hdlc_bits1 = 0;
- }
- break;
- case HDLC_SEND_DATA:
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- if(hdlc->hdlc_bits1 == 5){
- hdlc->hdlc_bits1 = 0;
- break;
- }
- if(hdlc->bit_shift==8){
- hdlc->crc = crc_ccitt_byte(hdlc->crc, hdlc->shift_reg);
- }
- if(hdlc->shift_reg & 0x01){
- hdlc->hdlc_bits1++;
- hdlc->cbin++;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- } else {
- hdlc->hdlc_bits1 = 0;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- }
- break;
- case HDLC_SEND_CRC1:
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- if(hdlc->hdlc_bits1 == 5){
- hdlc->hdlc_bits1 = 0;
- break;
- }
- if(hdlc->shift_reg & 0x01){
- hdlc->hdlc_bits1++;
- hdlc->cbin++;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- } else {
- hdlc->hdlc_bits1 = 0;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- }
- if(hdlc->bit_shift==0){
- hdlc->shift_reg = (hdlc->crc >> 8);
- hdlc->state = HDLC_SEND_CRC2;
- hdlc->bit_shift = 8;
- }
- break;
- case HDLC_SEND_CRC2:
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- if(hdlc->hdlc_bits1 == 5){
- hdlc->hdlc_bits1 = 0;
- break;
- }
- if(hdlc->shift_reg & 0x01){
- hdlc->hdlc_bits1++;
- hdlc->cbin++;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- } else {
- hdlc->hdlc_bits1 = 0;
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- }
- if(hdlc->bit_shift==0){
- hdlc->shift_reg = 0x7e;
- hdlc->state = HDLC_SEND_CLOSING_FLAG;
- hdlc->bit_shift = 8;
- }
- break;
- case HDLC_SEND_CLOSING_FLAG:
- hdlc->cbin <<= 1;
- hdlc->data_bits++;
- if(hdlc->hdlc_bits1 == 5){
- hdlc->hdlc_bits1 = 0;
- break;
- }
- if(hdlc->shift_reg & 0x01){
- hdlc->cbin++;
- }
- hdlc->shift_reg >>= 1;
- hdlc->bit_shift--;
- if(hdlc->bit_shift==0){
- hdlc->ffvalue = xfast_flag_value[hdlc->data_bits];
- if(hdlc->dchannel){
- hdlc->ffvalue = 0x7e;
- hdlc->state = HDLC_SEND_IDLE1;
- hdlc->bit_shift = 8-hdlc->data_bits;
- if(hdlc->bit_shift==0)
- hdlc->state = HDLC_SEND_FAST_IDLE;
- } else {
- if(!hdlc->do_adapt56){
- hdlc->state = HDLC_SEND_FAST_FLAG;
- hdlc->data_received = 0;
- } else {
- hdlc->state = HDLC_SENDFLAG_B0;
- hdlc->data_received = 0;
- }
- // Finished with this frame, send flags
- if (dsize > 1) dsize = 1;
- }
- }
- break;
- case HDLC_SEND_IDLE1:
- hdlc->do_closing = 0;
- hdlc->cbin <<= 1;
- hdlc->cbin++;
- hdlc->data_bits++;
- hdlc->bit_shift--;
- if(hdlc->bit_shift==0){
- hdlc->state = HDLC_SEND_FAST_IDLE;
- hdlc->bit_shift = 0;
- }
- break;
- case HDLC_SEND_FAST_IDLE:
- hdlc->do_closing = 0;
- hdlc->cbin = 0xff;
- hdlc->data_bits = 8;
- if(hdlc->bit_shift == 8){
- hdlc->cbin = 0x7e;
- hdlc->state = HDLC_SEND_FIRST_FLAG;
- } else {
- *dst++ = hdlc->cbin;
- hdlc->bit_shift = hdlc->data_bits = 0;
- len++;
- dsize = 0;
- }
- break;
- default:
- break;
- }
- if(hdlc->do_adapt56){
- if(hdlc->data_bits==7){
- hdlc->cbin <<= 1;
- hdlc->cbin++;
- hdlc->data_bits++;
- }
- }
- if(hdlc->data_bits==8){
- *dst++ = hdlc->cbin;
- hdlc->data_bits = 0;
- len++;
- dsize--;
- }
- }
- *count -= slen;
-
- return len;
-}
-
-EXPORT_SYMBOL(isdnhdlc_rcv_init);
-EXPORT_SYMBOL(isdnhdlc_decode);
-EXPORT_SYMBOL(isdnhdlc_out_init);
-EXPORT_SYMBOL(isdnhdlc_encode);
diff --git a/drivers/isdn/hisax/isdnhdlc.h b/drivers/isdn/hisax/isdnhdlc.h
deleted file mode 100644
index cf0a95a..0000000
--- a/drivers/isdn/hisax/isdnhdlc.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * isdnhdlc.h -- General purpose ISDN HDLC decoder.
- *
- * Implementation of a HDLC decoder/encoder in software.
- * Neccessary because some ISDN devices don't have HDLC
- * controllers. Also included: a bit reversal table.
- *
- *Copyright (C) 2002 Wolfgang Mües <wolfgang@iksw-muees.de>
- * 2001 Frode Isaksen <fisaksen@bewan.com>
- * 2001 Kai Germaschewski <kai.germaschewski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ISDNHDLC_H__
-#define __ISDNHDLC_H__
-
-struct isdnhdlc_vars {
- int bit_shift;
- int hdlc_bits1;
- int data_bits;
- int ffbit_shift; // encoding only
- int state;
- int dstpos;
-
- unsigned short crc;
-
- unsigned char cbin;
- unsigned char shift_reg;
- unsigned char ffvalue;
-
- unsigned int data_received:1; // set if transferring data
- unsigned int dchannel:1; // set if D channel (send idle instead of flags)
- unsigned int do_adapt56:1; // set if 56K adaptation
- unsigned int do_closing:1; // set if in closing phase (need to send CRC + flag
-};
-
-
-/*
- The return value from isdnhdlc_decode is
- the frame length, 0 if no complete frame was decoded,
- or a negative error number
-*/
-#define HDLC_FRAMING_ERROR 1
-#define HDLC_CRC_ERROR 2
-#define HDLC_LENGTH_ERROR 3
-
-extern void isdnhdlc_rcv_init (struct isdnhdlc_vars *hdlc, int do_adapt56);
-
-extern int isdnhdlc_decode (struct isdnhdlc_vars *hdlc, const unsigned char *src, int slen,int *count,
- unsigned char *dst, int dsize);
-
-extern void isdnhdlc_out_init (struct isdnhdlc_vars *hdlc,int is_d_channel,int do_adapt56);
-
-extern int isdnhdlc_encode (struct isdnhdlc_vars *hdlc,const unsigned char *src,unsigned short slen,int *count,
- unsigned char *dst,int dsize);
-
-#endif /* __ISDNHDLC_H__ */
diff --git a/drivers/isdn/hisax/isdnl1.c b/drivers/isdn/hisax/isdnl1.c
index 317f16f..9ce6abe 100644
--- a/drivers/isdn/hisax/isdnl1.c
+++ b/drivers/isdn/hisax/isdnl1.c
@@ -647,8 +647,6 @@
{ST_L1_F8, EV_TIMER_DEACT, l1_timer_deact},
};
-#define L1S_FN_COUNT (sizeof(L1SFnList)/sizeof(struct FsmNode))
-
#ifdef HISAX_UINTERFACE
static void
l1_deact_req_u(struct FsmInst *fi, int event, void *arg)
@@ -706,8 +704,6 @@
{ST_L1_RESET, EV_TIMER_DEACT, l1_timer_deact},
};
-#define L1U_FN_COUNT (sizeof(L1UFnList)/sizeof(struct FsmNode))
-
#endif
static void
@@ -754,8 +750,6 @@
{ST_L1_WAIT_DEACT, EV_TIMER_DEACT, l1b_timer_deact},
};
-#define L1B_FN_COUNT (sizeof(L1BFnList)/sizeof(struct FsmNode))
-
int __init
Isdnl1New(void)
{
@@ -765,7 +759,7 @@
l1fsm_s.event_count = L1_EVENT_COUNT;
l1fsm_s.strEvent = strL1Event;
l1fsm_s.strState = strL1SState;
- retval = FsmNew(&l1fsm_s, L1SFnList, L1S_FN_COUNT);
+ retval = FsmNew(&l1fsm_s, L1SFnList, ARRAY_SIZE(L1SFnList));
if (retval)
return retval;
@@ -773,7 +767,7 @@
l1fsm_b.event_count = L1_EVENT_COUNT;
l1fsm_b.strEvent = strL1Event;
l1fsm_b.strState = strL1BState;
- retval = FsmNew(&l1fsm_b, L1BFnList, L1B_FN_COUNT);
+ retval = FsmNew(&l1fsm_b, L1BFnList, ARRAY_SIZE(L1BFnList));
if (retval) {
FsmFree(&l1fsm_s);
return retval;
@@ -783,7 +777,7 @@
l1fsm_u.event_count = L1_EVENT_COUNT;
l1fsm_u.strEvent = strL1Event;
l1fsm_u.strState = strL1UState;
- retval = FsmNew(&l1fsm_u, L1UFnList, L1U_FN_COUNT);
+ retval = FsmNew(&l1fsm_u, L1UFnList, ARRAY_SIZE(L1UFnList));
if (retval) {
FsmFree(&l1fsm_s);
FsmFree(&l1fsm_b);
diff --git a/drivers/isdn/hisax/isdnl2.c b/drivers/isdn/hisax/isdnl2.c
index 3446f24..7b9496a 100644
--- a/drivers/isdn/hisax/isdnl2.c
+++ b/drivers/isdn/hisax/isdnl2.c
@@ -1623,8 +1623,6 @@
{ST_L2_8, EV_L1_DEACTIVATE, l2_persistent_da},
};
-#define L2_FN_COUNT (sizeof(L2FnList)/sizeof(struct FsmNode))
-
static void
isdnl2_l1l2(struct PStack *st, int pr, void *arg)
{
@@ -1836,7 +1834,7 @@
l2fsm.event_count = L2_EVENT_COUNT;
l2fsm.strEvent = strL2Event;
l2fsm.strState = strL2State;
- return FsmNew(&l2fsm, L2FnList, L2_FN_COUNT);
+ return FsmNew(&l2fsm, L2FnList, ARRAY_SIZE(L2FnList));
}
void
diff --git a/drivers/isdn/hisax/isdnl3.c b/drivers/isdn/hisax/isdnl3.c
index 935f233..0676602 100644
--- a/drivers/isdn/hisax/isdnl3.c
+++ b/drivers/isdn/hisax/isdnl3.c
@@ -543,8 +543,6 @@
};
/* *INDENT-ON* */
-#define L3_FN_COUNT (sizeof(L3FnList)/sizeof(struct FsmNode))
-
void
l3_msg(struct PStack *st, int pr, void *arg)
{
@@ -587,7 +585,7 @@
l3fsm.event_count = L3_EVENT_COUNT;
l3fsm.strEvent = strL3Event;
l3fsm.strState = strL3State;
- return FsmNew(&l3fsm, L3FnList, L3_FN_COUNT);
+ return FsmNew(&l3fsm, L3FnList, ARRAY_SIZE(L3FnList));
}
void
diff --git a/drivers/isdn/hisax/l3_1tr6.c b/drivers/isdn/hisax/l3_1tr6.c
index c5c36ee..b0554f8 100644
--- a/drivers/isdn/hisax/l3_1tr6.c
+++ b/drivers/isdn/hisax/l3_1tr6.c
@@ -698,9 +698,6 @@
CC_T308_2, l3_1tr6_t308_2},
};
-#define DOWNSTL_LEN \
- (sizeof(downstl) / sizeof(struct stateentry))
-
static struct stateentry datastln1[] =
{
{SBIT(0),
@@ -735,9 +732,6 @@
MT_N1_REL_ACK, l3_1tr6_rel_ack}
};
-#define DATASTLN1_LEN \
- (sizeof(datastln1) / sizeof(struct stateentry))
-
static struct stateentry manstatelist[] =
{
{SBIT(2),
@@ -746,8 +740,6 @@
DL_RELEASE | INDICATION, l3_1tr6_dl_release},
};
-#define MANSLLEN \
- (sizeof(manstatelist) / sizeof(struct stateentry))
/* *INDENT-ON* */
static void
@@ -840,11 +832,11 @@
mt = MT_N1_INVALID;
}
}
- for (i = 0; i < DATASTLN1_LEN; i++)
+ for (i = 0; i < ARRAY_SIZE(datastln1); i++)
if ((mt == datastln1[i].primitive) &&
((1 << proc->state) & datastln1[i].state))
break;
- if (i == DATASTLN1_LEN) {
+ if (i == ARRAY_SIZE(datastln1)) {
dev_kfree_skb(skb);
if (st->l3.debug & L3_DEB_STATE) {
sprintf(tmp, "up1tr6%sstate %d mt %x unhandled",
@@ -892,11 +884,11 @@
proc = arg;
}
- for (i = 0; i < DOWNSTL_LEN; i++)
+ for (i = 0; i < ARRAY_SIZE(downstl); i++)
if ((pr == downstl[i].primitive) &&
((1 << proc->state) & downstl[i].state))
break;
- if (i == DOWNSTL_LEN) {
+ if (i == ARRAY_SIZE(downstl)) {
if (st->l3.debug & L3_DEB_STATE) {
sprintf(tmp, "down1tr6 state %d prim %d unhandled",
proc->state, pr);
@@ -922,11 +914,11 @@
printk(KERN_ERR "HiSax man1tr6 without proc pr=%04x\n", pr);
return;
}
- for (i = 0; i < MANSLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(manstatelist); i++)
if ((pr == manstatelist[i].primitive) &&
((1 << proc->state) & manstatelist[i].state))
break;
- if (i == MANSLLEN) {
+ if (i == ARRAY_SIZE(manstatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "cr %d man1tr6 state %d prim %d unhandled",
proc->callref & 0x7f, proc->state, pr);
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index 99feae8..a12fa4d 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -2820,9 +2820,6 @@
CC_T309, l3dss1_dl_release},
};
-#define DOWNSLLEN \
- (sizeof(downstatelist) / sizeof(struct stateentry))
-
static struct stateentry datastatelist[] =
{
{ALL_STATES,
@@ -2875,9 +2872,6 @@
MT_RESUME_REJECT, l3dss1_resume_rej},
};
-#define DATASLLEN \
- (sizeof(datastatelist) / sizeof(struct stateentry))
-
static struct stateentry globalmes_list[] =
{
{ALL_STATES,
@@ -2888,8 +2882,6 @@
MT_RESTART_ACKNOWLEDGE, l3dss1_restart_ack},
*/
};
-#define GLOBALM_LEN \
- (sizeof(globalmes_list) / sizeof(struct stateentry))
static struct stateentry manstatelist[] =
{
@@ -2903,8 +2895,6 @@
DL_RELEASE | INDICATION, l3dss1_dl_release},
};
-#define MANSLLEN \
- (sizeof(manstatelist) / sizeof(struct stateentry))
/* *INDENT-ON* */
@@ -2918,11 +2908,11 @@
struct l3_process *proc = st->l3.global;
proc->callref = skb->data[2]; /* cr flag */
- for (i = 0; i < GLOBALM_LEN; i++)
+ for (i = 0; i < ARRAY_SIZE(globalmes_list); i++)
if ((mt == globalmes_list[i].primitive) &&
((1 << proc->state) & globalmes_list[i].state))
break;
- if (i == GLOBALM_LEN) {
+ if (i == ARRAY_SIZE(globalmes_list)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "dss1 global state %d mt %x unhandled",
proc->state, mt);
@@ -3097,11 +3087,11 @@
}
if ((p = findie(skb->data, skb->len, IE_DISPLAY, 0)) != NULL)
l3dss1_deliver_display(proc, pr, p); /* Display IE included */
- for (i = 0; i < DATASLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(datastatelist); i++)
if ((mt == datastatelist[i].primitive) &&
((1 << proc->state) & datastatelist[i].state))
break;
- if (i == DATASLLEN) {
+ if (i == ARRAY_SIZE(datastatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "dss1up%sstate %d mt %#x unhandled",
(pr == (DL_DATA | INDICATION)) ? " " : "(broadcast) ",
@@ -3156,11 +3146,11 @@
return;
}
- for (i = 0; i < DOWNSLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(downstatelist); i++)
if ((pr == downstatelist[i].primitive) &&
((1 << proc->state) & downstatelist[i].state))
break;
- if (i == DOWNSLLEN) {
+ if (i == ARRAY_SIZE(downstatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "dss1down state %d prim %#x unhandled",
proc->state, pr);
@@ -3184,11 +3174,11 @@
printk(KERN_ERR "HiSax dss1man without proc pr=%04x\n", pr);
return;
}
- for (i = 0; i < MANSLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(manstatelist); i++)
if ((pr == manstatelist[i].primitive) &&
((1 << proc->state) & manstatelist[i].state))
break;
- if (i == MANSLLEN) {
+ if (i == ARRAY_SIZE(manstatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "cr %d dss1man state %d prim %#x unhandled",
proc->callref & 0x7f, proc->state, pr);
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index f7041d5..4622d43 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -2755,9 +2755,6 @@
CC_TSPID, l3ni1_spid_tout },
};
-#define DOWNSLLEN \
- (sizeof(downstatelist) / sizeof(struct stateentry))
-
static struct stateentry datastatelist[] =
{
{ALL_STATES,
@@ -2810,9 +2807,6 @@
MT_RESUME_REJECT, l3ni1_resume_rej},
};
-#define DATASLLEN \
- (sizeof(datastatelist) / sizeof(struct stateentry))
-
static struct stateentry globalmes_list[] =
{
{ALL_STATES,
@@ -2825,8 +2819,6 @@
{ SBIT( 0 ), MT_DL_ESTABLISHED, l3ni1_spid_send },
{ SBIT( 20 ) | SBIT( 21 ) | SBIT( 22 ), MT_INFORMATION, l3ni1_spid_epid },
};
-#define GLOBALM_LEN \
- (sizeof(globalmes_list) / sizeof(struct stateentry))
static struct stateentry manstatelist[] =
{
@@ -2840,8 +2832,6 @@
DL_RELEASE | INDICATION, l3ni1_dl_release},
};
-#define MANSLLEN \
- (sizeof(manstatelist) / sizeof(struct stateentry))
/* *INDENT-ON* */
@@ -2858,11 +2848,11 @@
proc->callref = skb->data[2]; /* cr flag */
else
proc->callref = 0;
- for (i = 0; i < GLOBALM_LEN; i++)
+ for (i = 0; i < ARRAY_SIZE(globalmes_list); i++)
if ((mt == globalmes_list[i].primitive) &&
((1 << proc->state) & globalmes_list[i].state))
break;
- if (i == GLOBALM_LEN) {
+ if (i == ARRAY_SIZE(globalmes_list)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "ni1 global state %d mt %x unhandled",
proc->state, mt);
@@ -3049,11 +3039,11 @@
}
if ((p = findie(skb->data, skb->len, IE_DISPLAY, 0)) != NULL)
l3ni1_deliver_display(proc, pr, p); /* Display IE included */
- for (i = 0; i < DATASLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(datastatelist); i++)
if ((mt == datastatelist[i].primitive) &&
((1 << proc->state) & datastatelist[i].state))
break;
- if (i == DATASLLEN) {
+ if (i == ARRAY_SIZE(datastatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "ni1up%sstate %d mt %#x unhandled",
(pr == (DL_DATA | INDICATION)) ? " " : "(broadcast) ",
@@ -3108,11 +3098,11 @@
return;
}
- for (i = 0; i < DOWNSLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(downstatelist); i++)
if ((pr == downstatelist[i].primitive) &&
((1 << proc->state) & downstatelist[i].state))
break;
- if (i == DOWNSLLEN) {
+ if (i == ARRAY_SIZE(downstatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "ni1down state %d prim %#x unhandled",
proc->state, pr);
@@ -3136,11 +3126,11 @@
printk(KERN_ERR "HiSax ni1man without proc pr=%04x\n", pr);
return;
}
- for (i = 0; i < MANSLLEN; i++)
+ for (i = 0; i < ARRAY_SIZE(manstatelist); i++)
if ((pr == manstatelist[i].primitive) &&
((1 << proc->state) & manstatelist[i].state))
break;
- if (i == MANSLLEN) {
+ if (i == ARRAY_SIZE(manstatelist)) {
if (st->l3.debug & L3_DEB_STATE) {
l3_debug(st, "cr %d ni1man state %d prim %#x unhandled",
proc->callref & 0x7f, proc->state, pr);
diff --git a/drivers/isdn/hisax/q931.c b/drivers/isdn/hisax/q931.c
index aacbf0d..8b853d5 100644
--- a/drivers/isdn/hisax/q931.c
+++ b/drivers/isdn/hisax/q931.c
@@ -140,7 +140,7 @@
}
};
-#define MTSIZE sizeof(mtlist)/sizeof(struct MessageType)
+#define MTSIZE ARRAY_SIZE(mtlist)
static
struct MessageType mt_n0[] =
@@ -157,7 +157,7 @@
{MT_N0_CLO_ACK, "CLOse ACKnowledge"}
};
-#define MT_N0_LEN (sizeof(mt_n0) / sizeof(struct MessageType))
+#define MT_N0_LEN ARRAY_SIZE(mt_n0)
static
struct MessageType mt_n1[] =
@@ -194,7 +194,7 @@
{MT_N1_STAT, "STATus"}
};
-#define MT_N1_LEN (sizeof(mt_n1) / sizeof(struct MessageType))
+#define MT_N1_LEN ARRAY_SIZE(mt_n1)
static int
@@ -438,7 +438,7 @@
},
};
-#define CVSIZE sizeof(cvlist)/sizeof(struct CauseValue)
+#define CVSIZE ARRAY_SIZE(cvlist)
static
int
@@ -516,7 +516,7 @@
{CAUSE_UserInfoDiscarded, "User Info Discarded"}
};
-static int cause_1tr6_len = (sizeof(cause_1tr6) / sizeof(struct MessageType));
+static int cause_1tr6_len = ARRAY_SIZE(cause_1tr6);
static int
prcause_1tr6(char *dest, u_char * p)
@@ -865,7 +865,7 @@
{ 0x96, "Redirection name" },
{ 0x9e, "Text" },
};
-#define DTAGSIZE sizeof(dtaglist)/sizeof(struct DTag)
+#define DTAGSIZE ARRAY_SIZE(dtaglist)
static int
disptext_ni1(char *dest, u_char * p)
@@ -1074,7 +1074,7 @@
};
-#define IESIZE sizeof(ielist)/sizeof(struct InformationElement)
+#define IESIZE ARRAY_SIZE(ielist)
static
struct InformationElement ielist_ni1[] = {
@@ -1102,7 +1102,7 @@
};
-#define IESIZE_NI1 sizeof(ielist_ni1)/sizeof(struct InformationElement)
+#define IESIZE_NI1 ARRAY_SIZE(ielist_ni1)
static
struct InformationElement ielist_ni1_cs5[] = {
@@ -1110,14 +1110,14 @@
{ 0x2a, "Display text", disptext_ni1 },
};
-#define IESIZE_NI1_CS5 sizeof(ielist_ni1_cs5)/sizeof(struct InformationElement)
+#define IESIZE_NI1_CS5 ARRAY_SIZE(ielist_ni1_cs5)
static
struct InformationElement ielist_ni1_cs6[] = {
{ 0x7b, "Call appearance", general_ni1 },
};
-#define IESIZE_NI1_CS6 sizeof(ielist_ni1_cs6)/sizeof(struct InformationElement)
+#define IESIZE_NI1_CS6 ARRAY_SIZE(ielist_ni1_cs6)
static struct InformationElement we_0[] =
{
@@ -1133,7 +1133,7 @@
{WE0_userInfo, "User Info", general}
};
-#define WE_0_LEN (sizeof(we_0) / sizeof(struct InformationElement))
+#define WE_0_LEN ARRAY_SIZE(we_0)
static struct InformationElement we_6[] =
{
@@ -1145,7 +1145,7 @@
{WE6_statusCalled, "Status Called", general},
{WE6_addTransAttr, "Additional Transmission Attributes", general}
};
-#define WE_6_LEN (sizeof(we_6) / sizeof(struct InformationElement))
+#define WE_6_LEN ARRAY_SIZE(we_6)
int
QuickHex(char *txt, u_char * p, int cnt)
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
index cff7a63..64f78a8 100644
--- a/drivers/isdn/hisax/st5481.h
+++ b/drivers/isdn/hisax/st5481.h
@@ -226,7 +226,7 @@
#define INFO(format, arg...) \
printk(KERN_INFO "%s:%s: " format "\n" , __FILE__, __func__ , ## arg)
-#include "isdnhdlc.h"
+#include <linux/isdn/hdlc.h>
#include "fsm.h"
#include "hisax_if.h"
#include <linux/skbuff.h>
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index 0074b60..95b1cdd 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -218,7 +218,10 @@
if (bcs->mode != L1_MODE_NULL) {
// Open the B channel
if (bcs->mode != L1_MODE_TRANS) {
- isdnhdlc_out_init(&b_out->hdlc_state, 0, bcs->mode == L1_MODE_HDLC_56K);
+ u32 features = HDLC_BITREVERSE;
+ if (bcs->mode == L1_MODE_HDLC_56K)
+ features |= HDLC_56KBIT;
+ isdnhdlc_out_init(&b_out->hdlc_state, features);
}
st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2, NULL, NULL);
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
index 077991c..39e8e49 100644
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -417,7 +417,7 @@
DBG(2,"len=%d",skb->len);
- isdnhdlc_out_init(&d_out->hdlc_state, 1, 0);
+ isdnhdlc_out_init(&d_out->hdlc_state, HDLC_DCHANNEL | HDLC_BITREVERSE);
if (test_and_set_bit(buf_nr, &d_out->busy)) {
WARNING("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 2b3a055..10d41c5 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -637,10 +637,13 @@
usb_unlink_urb(in->urb[1]);
if (in->mode != L1_MODE_NULL) {
- if (in->mode != L1_MODE_TRANS)
- isdnhdlc_rcv_init(&in->hdlc_state,
- in->mode == L1_MODE_HDLC_56K);
-
+ if (in->mode != L1_MODE_TRANS) {
+ u32 features = HDLC_BITREVERSE;
+
+ if (in->mode == L1_MODE_HDLC_56K)
+ features |= HDLC_56KBIT;
+ isdnhdlc_rcv_init(&in->hdlc_state, features);
+ }
st5481_usb_pipe_reset(in->adapter, in->ep, NULL, NULL);
st5481_usb_device_ctrl_msg(in->adapter, in->counter,
in->packet_size,
diff --git a/drivers/isdn/hisax/tei.c b/drivers/isdn/hisax/tei.c
index ceb0df9..6e65424 100644
--- a/drivers/isdn/hisax/tei.c
+++ b/drivers/isdn/hisax/tei.c
@@ -447,8 +447,6 @@
{ST_TEI_IDVERIFY, EV_CHKREQ, tei_id_chk_req},
};
-#define TEI_FN_COUNT (sizeof(TeiFnList)/sizeof(struct FsmNode))
-
int __init
TeiNew(void)
{
@@ -456,7 +454,7 @@
teifsm.event_count = TEI_EVENT_COUNT;
teifsm.strEvent = strTeiEvent;
teifsm.strState = strTeiState;
- return FsmNew(&teifsm, TeiFnList, TEI_FN_COUNT);
+ return FsmNew(&teifsm, TeiFnList, ARRAY_SIZE(TeiFnList));
}
void
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index bb1c8dd..c4d862c 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -105,8 +105,6 @@
container_of(work, struct IsdnCardState, tqueue);
struct PStack *stptr;
- if (!cs)
- return;
if (test_and_clear_bit(D_CLEARBUSY, &cs->event)) {
if (cs->debug)
debugl1(cs, "D-Channel Busy cleared");
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index 579974c..72eb926 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -119,7 +119,7 @@
/* send a packet on this interface. */
/* new style for kernel >= 2.3.33 */
/************************************/
-static int
+static netdev_tx_t
net_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev;
@@ -148,7 +148,7 @@
if (lp->sk_count <= 3) {
schedule_work(&((hysdn_card *) dev->ml_priv)->irq_queue);
}
- return (0); /* success */
+ return NETDEV_TX_OK; /* success */
} /* net_send_packet */
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index ed3510f..dd744ff 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -2,6 +2,8 @@
# Old ISDN4Linux config
#
+if ISDN_I4L
+
config ISDN_PPP
bool "Support synchronous PPP"
depends on INET
@@ -135,3 +137,12 @@
source "drivers/isdn/hysdn/Kconfig"
endmenu
+# end ISDN_I4L
+endif
+
+config ISDN_HDLC
+ tristate
+ depends on HISAX_ST5481
+ select CRC_CCITT
+ select BITREVERSE
+
diff --git a/drivers/isdn/i4l/Makefile b/drivers/isdn/i4l/Makefile
index 49a06c0..cb9d3bb 100644
--- a/drivers/isdn/i4l/Makefile
+++ b/drivers/isdn/i4l/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_ISDN_I4L) += isdn.o
obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
+obj-$(CONFIG_ISDN_HDLC) += isdnhdlc.o
# Multipart objects.
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index de4aad0..90b56ed 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -176,7 +176,8 @@
/* Prototypes */
static int isdn_net_force_dial_lp(isdn_net_local *);
-static int isdn_net_start_xmit(struct sk_buff *, struct net_device *);
+static netdev_tx_t isdn_net_start_xmit(struct sk_buff *,
+ struct net_device *);
static void isdn_net_ciscohdlck_connected(isdn_net_local *lp);
static void isdn_net_ciscohdlck_disconnected(isdn_net_local *lp);
@@ -1051,12 +1052,12 @@
isdn_net_dev *nd;
isdn_net_local *slp;
isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
- int retv = 0;
+ int retv = NETDEV_TX_OK;
if (((isdn_net_local *) netdev_priv(ndev))->master) {
printk("isdn BUG at %s:%d!\n", __FILE__, __LINE__);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* For the other encaps the header has already been built */
@@ -1160,7 +1161,7 @@
* If this interface isn't connected to a ISDN-Channel, find a free channel,
* and start dialing.
*/
-static int
+static netdev_tx_t
isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
@@ -1202,7 +1203,7 @@
if (!(ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_AUTO)) {
isdn_net_unreachable(ndev, skb, "dial rejected: interface not in dialmode `auto'");
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (lp->phone[1]) {
ulong flags;
@@ -1215,7 +1216,7 @@
if(time_before(jiffies, lp->dialwait_timer)) {
isdn_net_unreachable(ndev, skb, "dial rejected: retry-time not reached");
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
lp->dialwait_timer = 0;
}
@@ -1243,7 +1244,7 @@
isdn_net_unreachable(ndev, skb,
"No channel");
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* Log packet, which triggered dialing */
if (dev->net_verbose)
@@ -1258,7 +1259,7 @@
dev_kfree_skb(skb);
isdn_net_unbind_channel(lp);
spin_unlock_irqrestore(&dev->lock, flags);
- return 0; /* STN (skb to nirvana) ;) */
+ return NETDEV_TX_OK; /* STN (skb to nirvana) ;) */
}
#ifdef CONFIG_IPPP_FILTER
if (isdn_ppp_autodial_filter(skb, lp)) {
@@ -1267,7 +1268,7 @@
spin_unlock_irqrestore(&dev->lock, flags);
isdn_net_unreachable(ndev, skb, "dial rejected: packet filtered");
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
#endif
spin_unlock_irqrestore(&dev->lock, flags);
@@ -1285,7 +1286,7 @@
isdn_net_unreachable(ndev, skb,
"No phone number");
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
} else {
/* Device is connected to an ISDN channel */
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index aa30b5c..2d14b64 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -1223,7 +1223,7 @@
isdn_net_dev *nd;
unsigned int proto = PPP_IP; /* 0x21 */
struct ippp_struct *ipt,*ipts;
- int slot, retval = 0;
+ int slot, retval = NETDEV_TX_OK;
mlp = (isdn_net_local *) netdev_priv(netdev);
nd = mlp->netdev; /* get master lp */
@@ -1240,7 +1240,7 @@
if (!(ipts->pppcfg & SC_ENABLE_IP)) { /* PPP connected ? */
if (ipts->debug & 0x1)
printk(KERN_INFO "%s: IP frame delayed.\n", netdev->name);
- retval = 1;
+ retval = NETDEV_TX_BUSY;
goto out;
}
@@ -1261,7 +1261,7 @@
lp = isdn_net_get_locked_lp(nd);
if (!lp) {
printk(KERN_WARNING "%s: all channels busy - requeuing!\n", netdev->name);
- retval = 1;
+ retval = NETDEV_TX_BUSY;
goto out;
}
/* we have our lp locked from now on */
diff --git a/drivers/isdn/i4l/isdnhdlc.c b/drivers/isdn/i4l/isdnhdlc.c
new file mode 100644
index 0000000..c989aa3
--- /dev/null
+++ b/drivers/isdn/i4l/isdnhdlc.c
@@ -0,0 +1,630 @@
+/*
+ * isdnhdlc.c -- General purpose ISDN HDLC decoder.
+ *
+ * Copyright (C)
+ * 2009 Karsten Keil <keil@b1-systems.de>
+ * 2002 Wolfgang Mües <wolfgang@iksw-muees.de>
+ * 2001 Frode Isaksen <fisaksen@bewan.com>
+ * 2001 Kai Germaschewski <kai.germaschewski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/crc-ccitt.h>
+#include <linux/isdn/hdlc.h>
+#include <linux/bitrev.h>
+
+/*-------------------------------------------------------------------*/
+
+MODULE_AUTHOR("Wolfgang Mües <wolfgang@iksw-muees.de>, "
+ "Frode Isaksen <fisaksen@bewan.com>, "
+ "Kai Germaschewski <kai.germaschewski@gmx.de>");
+MODULE_DESCRIPTION("General purpose ISDN HDLC decoder");
+MODULE_LICENSE("GPL");
+
+/*-------------------------------------------------------------------*/
+
+enum {
+ HDLC_FAST_IDLE, HDLC_GET_FLAG_B0, HDLC_GETFLAG_B1A6, HDLC_GETFLAG_B7,
+ HDLC_GET_DATA, HDLC_FAST_FLAG
+};
+
+enum {
+ HDLC_SEND_DATA, HDLC_SEND_CRC1, HDLC_SEND_FAST_FLAG,
+ HDLC_SEND_FIRST_FLAG, HDLC_SEND_CRC2, HDLC_SEND_CLOSING_FLAG,
+ HDLC_SEND_IDLE1, HDLC_SEND_FAST_IDLE, HDLC_SENDFLAG_B0,
+ HDLC_SENDFLAG_B1A6, HDLC_SENDFLAG_B7, STOPPED, HDLC_SENDFLAG_ONE
+};
+
+void isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, u32 features)
+{
+ memset(hdlc, 0, sizeof(struct isdnhdlc_vars));
+ hdlc->state = HDLC_GET_DATA;
+ if (features & HDLC_56KBIT)
+ hdlc->do_adapt56 = 1;
+ if (features & HDLC_BITREVERSE)
+ hdlc->do_bitreverse = 1;
+}
+EXPORT_SYMBOL(isdnhdlc_out_init);
+
+void isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, u32 features)
+{
+ memset(hdlc, 0, sizeof(struct isdnhdlc_vars));
+ if (features & HDLC_DCHANNEL) {
+ hdlc->dchannel = 1;
+ hdlc->state = HDLC_SEND_FIRST_FLAG;
+ } else {
+ hdlc->dchannel = 0;
+ hdlc->state = HDLC_SEND_FAST_FLAG;
+ hdlc->ffvalue = 0x7e;
+ }
+ hdlc->cbin = 0x7e;
+ if (features & HDLC_56KBIT) {
+ hdlc->do_adapt56 = 1;
+ hdlc->state = HDLC_SENDFLAG_B0;
+ } else
+ hdlc->data_bits = 8;
+ if (features & HDLC_BITREVERSE)
+ hdlc->do_bitreverse = 1;
+}
+EXPORT_SYMBOL(isdnhdlc_rcv_init);
+
+static int
+check_frame(struct isdnhdlc_vars *hdlc)
+{
+ int status;
+
+ if (hdlc->dstpos < 2) /* too small - framing error */
+ status = -HDLC_FRAMING_ERROR;
+ else if (hdlc->crc != 0xf0b8) /* crc error */
+ status = -HDLC_CRC_ERROR;
+ else {
+ /* remove CRC */
+ hdlc->dstpos -= 2;
+ /* good frame */
+ status = hdlc->dstpos;
+ }
+ return status;
+}
+
+/*
+ isdnhdlc_decode - decodes HDLC frames from a transparent bit stream.
+
+ The source buffer is scanned for valid HDLC frames looking for
+ flags (01111110) to indicate the start of a frame. If the start of
+ the frame is found, the bit stuffing is removed (0 after 5 1's).
+ When a new flag is found, the complete frame has been received
+ and the CRC is checked.
+ If a valid frame is found, the function returns the frame length
+ excluding the CRC with the bit HDLC_END_OF_FRAME set.
+ If the beginning of a valid frame is found, the function returns
+ the length.
+ If a framing error is found (too many 1s and not a flag) the function
+ returns the length with the bit HDLC_FRAMING_ERROR set.
+ If a CRC error is found the function returns the length with the
+ bit HDLC_CRC_ERROR set.
+ If the frame length exceeds the destination buffer size, the function
+ returns the length with the bit HDLC_LENGTH_ERROR set.
+
+ src - source buffer
+ slen - source buffer length
+ count - number of bytes removed (decoded) from the source buffer
+ dst _ destination buffer
+ dsize - destination buffer size
+ returns - number of decoded bytes in the destination buffer and status
+ flag.
+ */
+int isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src, int slen,
+ int *count, u8 *dst, int dsize)
+{
+ int status = 0;
+
+ static const unsigned char fast_flag[] = {
+ 0x00, 0x00, 0x00, 0x20, 0x30, 0x38, 0x3c, 0x3e, 0x3f
+ };
+
+ static const unsigned char fast_flag_value[] = {
+ 0x00, 0x7e, 0xfc, 0xf9, 0xf3, 0xe7, 0xcf, 0x9f, 0x3f
+ };
+
+ static const unsigned char fast_abort[] = {
+ 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff
+ };
+
+#define handle_fast_flag(h) \
+ do {\
+ if (h->cbin == fast_flag[h->bit_shift]) {\
+ h->ffvalue = fast_flag_value[h->bit_shift];\
+ h->state = HDLC_FAST_FLAG;\
+ h->ffbit_shift = h->bit_shift;\
+ h->bit_shift = 1;\
+ } else {\
+ h->state = HDLC_GET_DATA;\
+ h->data_received = 0;\
+ } \
+ } while (0)
+
+#define handle_abort(h) \
+ do {\
+ h->shift_reg = fast_abort[h->ffbit_shift - 1];\
+ h->hdlc_bits1 = h->ffbit_shift - 2;\
+ if (h->hdlc_bits1 < 0)\
+ h->hdlc_bits1 = 0;\
+ h->data_bits = h->ffbit_shift - 1;\
+ h->state = HDLC_GET_DATA;\
+ h->data_received = 0;\
+ } while (0)
+
+ *count = slen;
+
+ while (slen > 0) {
+ if (hdlc->bit_shift == 0) {
+ /* the code is for bitreverse streams */
+ if (hdlc->do_bitreverse == 0)
+ hdlc->cbin = bitrev8(*src++);
+ else
+ hdlc->cbin = *src++;
+ slen--;
+ hdlc->bit_shift = 8;
+ if (hdlc->do_adapt56)
+ hdlc->bit_shift--;
+ }
+
+ switch (hdlc->state) {
+ case STOPPED:
+ return 0;
+ case HDLC_FAST_IDLE:
+ if (hdlc->cbin == 0xff) {
+ hdlc->bit_shift = 0;
+ break;
+ }
+ hdlc->state = HDLC_GET_FLAG_B0;
+ hdlc->hdlc_bits1 = 0;
+ hdlc->bit_shift = 8;
+ break;
+ case HDLC_GET_FLAG_B0:
+ if (!(hdlc->cbin & 0x80)) {
+ hdlc->state = HDLC_GETFLAG_B1A6;
+ hdlc->hdlc_bits1 = 0;
+ } else {
+ if ((!hdlc->do_adapt56) &&
+ (++hdlc->hdlc_bits1 >= 8) &&
+ (hdlc->bit_shift == 1))
+ hdlc->state = HDLC_FAST_IDLE;
+ }
+ hdlc->cbin <<= 1;
+ hdlc->bit_shift--;
+ break;
+ case HDLC_GETFLAG_B1A6:
+ if (hdlc->cbin & 0x80) {
+ hdlc->hdlc_bits1++;
+ if (hdlc->hdlc_bits1 == 6)
+ hdlc->state = HDLC_GETFLAG_B7;
+ } else
+ hdlc->hdlc_bits1 = 0;
+ hdlc->cbin <<= 1;
+ hdlc->bit_shift--;
+ break;
+ case HDLC_GETFLAG_B7:
+ if (hdlc->cbin & 0x80) {
+ hdlc->state = HDLC_GET_FLAG_B0;
+ } else {
+ hdlc->state = HDLC_GET_DATA;
+ hdlc->crc = 0xffff;
+ hdlc->shift_reg = 0;
+ hdlc->hdlc_bits1 = 0;
+ hdlc->data_bits = 0;
+ hdlc->data_received = 0;
+ }
+ hdlc->cbin <<= 1;
+ hdlc->bit_shift--;
+ break;
+ case HDLC_GET_DATA:
+ if (hdlc->cbin & 0x80) {
+ hdlc->hdlc_bits1++;
+ switch (hdlc->hdlc_bits1) {
+ case 6:
+ break;
+ case 7:
+ if (hdlc->data_received)
+ /* bad frame */
+ status = -HDLC_FRAMING_ERROR;
+ if (!hdlc->do_adapt56) {
+ if (hdlc->cbin == fast_abort
+ [hdlc->bit_shift + 1]) {
+ hdlc->state =
+ HDLC_FAST_IDLE;
+ hdlc->bit_shift = 1;
+ break;
+ }
+ } else
+ hdlc->state = HDLC_GET_FLAG_B0;
+ break;
+ default:
+ hdlc->shift_reg >>= 1;
+ hdlc->shift_reg |= 0x80;
+ hdlc->data_bits++;
+ break;
+ }
+ } else {
+ switch (hdlc->hdlc_bits1) {
+ case 5:
+ break;
+ case 6:
+ if (hdlc->data_received)
+ status = check_frame(hdlc);
+ hdlc->crc = 0xffff;
+ hdlc->shift_reg = 0;
+ hdlc->data_bits = 0;
+ if (!hdlc->do_adapt56)
+ handle_fast_flag(hdlc);
+ else {
+ hdlc->state = HDLC_GET_DATA;
+ hdlc->data_received = 0;
+ }
+ break;
+ default:
+ hdlc->shift_reg >>= 1;
+ hdlc->data_bits++;
+ break;
+ }
+ hdlc->hdlc_bits1 = 0;
+ }
+ if (status) {
+ hdlc->dstpos = 0;
+ *count -= slen;
+ hdlc->cbin <<= 1;
+ hdlc->bit_shift--;
+ return status;
+ }
+ if (hdlc->data_bits == 8) {
+ hdlc->data_bits = 0;
+ hdlc->data_received = 1;
+ hdlc->crc = crc_ccitt_byte(hdlc->crc,
+ hdlc->shift_reg);
+
+ /* good byte received */
+ if (hdlc->dstpos < dsize)
+ dst[hdlc->dstpos++] = hdlc->shift_reg;
+ else {
+ /* frame too long */
+ status = -HDLC_LENGTH_ERROR;
+ hdlc->dstpos = 0;
+ }
+ }
+ hdlc->cbin <<= 1;
+ hdlc->bit_shift--;
+ break;
+ case HDLC_FAST_FLAG:
+ if (hdlc->cbin == hdlc->ffvalue) {
+ hdlc->bit_shift = 0;
+ break;
+ } else {
+ if (hdlc->cbin == 0xff) {
+ hdlc->state = HDLC_FAST_IDLE;
+ hdlc->bit_shift = 0;
+ } else if (hdlc->ffbit_shift == 8) {
+ hdlc->state = HDLC_GETFLAG_B7;
+ break;
+ } else
+ handle_abort(hdlc);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ *count -= slen;
+ return 0;
+}
+EXPORT_SYMBOL(isdnhdlc_decode);
+/*
+ isdnhdlc_encode - encodes HDLC frames to a transparent bit stream.
+
+ The bit stream starts with a beginning flag (01111110). After
+ that each byte is added to the bit stream with bit stuffing added
+ (0 after 5 1's).
+ When the last byte has been removed from the source buffer, the
+ CRC (2 bytes is added) and the frame terminates with the ending flag.
+ For the dchannel, the idle character (all 1's) is also added at the end.
+ If this function is called with empty source buffer (slen=0), flags or
+ idle character will be generated.
+
+ src - source buffer
+ slen - source buffer length
+ count - number of bytes removed (encoded) from source buffer
+ dst _ destination buffer
+ dsize - destination buffer size
+ returns - number of encoded bytes in the destination buffer
+*/
+int isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src, u16 slen,
+ int *count, u8 *dst, int dsize)
+{
+ static const unsigned char xfast_flag_value[] = {
+ 0x7e, 0x3f, 0x9f, 0xcf, 0xe7, 0xf3, 0xf9, 0xfc, 0x7e
+ };
+
+ int len = 0;
+
+ *count = slen;
+
+ /* special handling for one byte frames */
+ if ((slen == 1) && (hdlc->state == HDLC_SEND_FAST_FLAG))
+ hdlc->state = HDLC_SENDFLAG_ONE;
+ while (dsize > 0) {
+ if (hdlc->bit_shift == 0) {
+ if (slen && !hdlc->do_closing) {
+ hdlc->shift_reg = *src++;
+ slen--;
+ if (slen == 0)
+ /* closing sequence, CRC + flag(s) */
+ hdlc->do_closing = 1;
+ hdlc->bit_shift = 8;
+ } else {
+ if (hdlc->state == HDLC_SEND_DATA) {
+ if (hdlc->data_received) {
+ hdlc->state = HDLC_SEND_CRC1;
+ hdlc->crc ^= 0xffff;
+ hdlc->bit_shift = 8;
+ hdlc->shift_reg =
+ hdlc->crc & 0xff;
+ } else if (!hdlc->do_adapt56)
+ hdlc->state =
+ HDLC_SEND_FAST_FLAG;
+ else
+ hdlc->state =
+ HDLC_SENDFLAG_B0;
+ }
+
+ }
+ }
+
+ switch (hdlc->state) {
+ case STOPPED:
+ while (dsize--)
+ *dst++ = 0xff;
+ return dsize;
+ case HDLC_SEND_FAST_FLAG:
+ hdlc->do_closing = 0;
+ if (slen == 0) {
+ /* the code is for bitreverse streams */
+ if (hdlc->do_bitreverse == 0)
+ *dst++ = bitrev8(hdlc->ffvalue);
+ else
+ *dst++ = hdlc->ffvalue;
+ len++;
+ dsize--;
+ break;
+ }
+ /* fall through */
+ case HDLC_SENDFLAG_ONE:
+ if (hdlc->bit_shift == 8) {
+ hdlc->cbin = hdlc->ffvalue >>
+ (8 - hdlc->data_bits);
+ hdlc->state = HDLC_SEND_DATA;
+ hdlc->crc = 0xffff;
+ hdlc->hdlc_bits1 = 0;
+ hdlc->data_received = 1;
+ }
+ break;
+ case HDLC_SENDFLAG_B0:
+ hdlc->do_closing = 0;
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ hdlc->hdlc_bits1 = 0;
+ hdlc->state = HDLC_SENDFLAG_B1A6;
+ break;
+ case HDLC_SENDFLAG_B1A6:
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ hdlc->cbin++;
+ if (++hdlc->hdlc_bits1 == 6)
+ hdlc->state = HDLC_SENDFLAG_B7;
+ break;
+ case HDLC_SENDFLAG_B7:
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ if (slen == 0) {
+ hdlc->state = HDLC_SENDFLAG_B0;
+ break;
+ }
+ if (hdlc->bit_shift == 8) {
+ hdlc->state = HDLC_SEND_DATA;
+ hdlc->crc = 0xffff;
+ hdlc->hdlc_bits1 = 0;
+ hdlc->data_received = 1;
+ }
+ break;
+ case HDLC_SEND_FIRST_FLAG:
+ hdlc->data_received = 1;
+ if (hdlc->data_bits == 8) {
+ hdlc->state = HDLC_SEND_DATA;
+ hdlc->crc = 0xffff;
+ hdlc->hdlc_bits1 = 0;
+ break;
+ }
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ if (hdlc->shift_reg & 0x01)
+ hdlc->cbin++;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ if (hdlc->bit_shift == 0) {
+ hdlc->state = HDLC_SEND_DATA;
+ hdlc->crc = 0xffff;
+ hdlc->hdlc_bits1 = 0;
+ }
+ break;
+ case HDLC_SEND_DATA:
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ if (hdlc->hdlc_bits1 == 5) {
+ hdlc->hdlc_bits1 = 0;
+ break;
+ }
+ if (hdlc->bit_shift == 8)
+ hdlc->crc = crc_ccitt_byte(hdlc->crc,
+ hdlc->shift_reg);
+ if (hdlc->shift_reg & 0x01) {
+ hdlc->hdlc_bits1++;
+ hdlc->cbin++;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ } else {
+ hdlc->hdlc_bits1 = 0;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ }
+ break;
+ case HDLC_SEND_CRC1:
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ if (hdlc->hdlc_bits1 == 5) {
+ hdlc->hdlc_bits1 = 0;
+ break;
+ }
+ if (hdlc->shift_reg & 0x01) {
+ hdlc->hdlc_bits1++;
+ hdlc->cbin++;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ } else {
+ hdlc->hdlc_bits1 = 0;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ }
+ if (hdlc->bit_shift == 0) {
+ hdlc->shift_reg = (hdlc->crc >> 8);
+ hdlc->state = HDLC_SEND_CRC2;
+ hdlc->bit_shift = 8;
+ }
+ break;
+ case HDLC_SEND_CRC2:
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ if (hdlc->hdlc_bits1 == 5) {
+ hdlc->hdlc_bits1 = 0;
+ break;
+ }
+ if (hdlc->shift_reg & 0x01) {
+ hdlc->hdlc_bits1++;
+ hdlc->cbin++;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ } else {
+ hdlc->hdlc_bits1 = 0;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ }
+ if (hdlc->bit_shift == 0) {
+ hdlc->shift_reg = 0x7e;
+ hdlc->state = HDLC_SEND_CLOSING_FLAG;
+ hdlc->bit_shift = 8;
+ }
+ break;
+ case HDLC_SEND_CLOSING_FLAG:
+ hdlc->cbin <<= 1;
+ hdlc->data_bits++;
+ if (hdlc->hdlc_bits1 == 5) {
+ hdlc->hdlc_bits1 = 0;
+ break;
+ }
+ if (hdlc->shift_reg & 0x01)
+ hdlc->cbin++;
+ hdlc->shift_reg >>= 1;
+ hdlc->bit_shift--;
+ if (hdlc->bit_shift == 0) {
+ hdlc->ffvalue =
+ xfast_flag_value[hdlc->data_bits];
+ if (hdlc->dchannel) {
+ hdlc->ffvalue = 0x7e;
+ hdlc->state = HDLC_SEND_IDLE1;
+ hdlc->bit_shift = 8-hdlc->data_bits;
+ if (hdlc->bit_shift == 0)
+ hdlc->state =
+ HDLC_SEND_FAST_IDLE;
+ } else {
+ if (!hdlc->do_adapt56) {
+ hdlc->state =
+ HDLC_SEND_FAST_FLAG;
+ hdlc->data_received = 0;
+ } else {
+ hdlc->state = HDLC_SENDFLAG_B0;
+ hdlc->data_received = 0;
+ }
+ /* Finished this frame, send flags */
+ if (dsize > 1)
+ dsize = 1;
+ }
+ }
+ break;
+ case HDLC_SEND_IDLE1:
+ hdlc->do_closing = 0;
+ hdlc->cbin <<= 1;
+ hdlc->cbin++;
+ hdlc->data_bits++;
+ hdlc->bit_shift--;
+ if (hdlc->bit_shift == 0) {
+ hdlc->state = HDLC_SEND_FAST_IDLE;
+ hdlc->bit_shift = 0;
+ }
+ break;
+ case HDLC_SEND_FAST_IDLE:
+ hdlc->do_closing = 0;
+ hdlc->cbin = 0xff;
+ hdlc->data_bits = 8;
+ if (hdlc->bit_shift == 8) {
+ hdlc->cbin = 0x7e;
+ hdlc->state = HDLC_SEND_FIRST_FLAG;
+ } else {
+ /* the code is for bitreverse streams */
+ if (hdlc->do_bitreverse == 0)
+ *dst++ = bitrev8(hdlc->cbin);
+ else
+ *dst++ = hdlc->cbin;
+ hdlc->bit_shift = 0;
+ hdlc->data_bits = 0;
+ len++;
+ dsize = 0;
+ }
+ break;
+ default:
+ break;
+ }
+ if (hdlc->do_adapt56) {
+ if (hdlc->data_bits == 7) {
+ hdlc->cbin <<= 1;
+ hdlc->cbin++;
+ hdlc->data_bits++;
+ }
+ }
+ if (hdlc->data_bits == 8) {
+ /* the code is for bitreverse streams */
+ if (hdlc->do_bitreverse == 0)
+ *dst++ = bitrev8(hdlc->cbin);
+ else
+ *dst++ = hdlc->cbin;
+ hdlc->data_bits = 0;
+ len++;
+ dsize--;
+ }
+ }
+ *count -= slen;
+
+ return len;
+}
+EXPORT_SYMBOL(isdnhdlc_encode);
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
index 0481a0c..e8049be 100644
--- a/drivers/isdn/mISDN/hwchannel.c
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -114,13 +114,14 @@
}
EXPORT_SYMBOL(mISDN_freedchannel);
-int
-mISDN_freebchannel(struct bchannel *ch)
+void
+mISDN_clear_bchannel(struct bchannel *ch)
{
if (ch->tx_skb) {
dev_kfree_skb(ch->tx_skb);
ch->tx_skb = NULL;
}
+ ch->tx_idx = 0;
if (ch->rx_skb) {
dev_kfree_skb(ch->rx_skb);
ch->rx_skb = NULL;
@@ -129,6 +130,16 @@
dev_kfree_skb(ch->next_skb);
ch->next_skb = NULL;
}
+ test_and_clear_bit(FLG_TX_BUSY, &ch->Flags);
+ test_and_clear_bit(FLG_TX_NEXT, &ch->Flags);
+ test_and_clear_bit(FLG_ACTIVE, &ch->Flags);
+}
+EXPORT_SYMBOL(mISDN_clear_bchannel);
+
+int
+mISDN_freebchannel(struct bchannel *ch)
+{
+ mISDN_clear_bchannel(ch);
skb_queue_purge(&ch->rqueue);
ch->rcount = 0;
flush_scheduled_work();
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index 9c2589e..e17f004 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -1832,8 +1832,6 @@
{ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da},
};
-#define L2_FN_COUNT (sizeof(L2FnList)/sizeof(struct FsmNode))
-
static int
ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
{
diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c
index a247ae6..1bc5db4 100644
--- a/drivers/leds/ledtrig-gpio.c
+++ b/drivers/leds/ledtrig-gpio.c
@@ -117,6 +117,9 @@
gpio_data->inverted = !!inverted;
+ /* After inverting, we need to update the LED. */
+ schedule_work(&gpio_data->work);
+
return n;
}
static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show,
@@ -146,20 +149,26 @@
return -EINVAL;
}
+ if (gpio_data->gpio == gpio)
+ return n;
+
if (!gpio) {
- free_irq(gpio_to_irq(gpio_data->gpio), led);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = 0;
return n;
}
- if (gpio_data->gpio > 0 && gpio_data->gpio != gpio)
- free_irq(gpio_to_irq(gpio_data->gpio), led);
-
- gpio_data->gpio = gpio;
ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq,
IRQF_SHARED | IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
- if (ret)
+ if (ret) {
dev_err(dev, "request_irq failed with error %d\n", ret);
+ } else {
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
+ gpio_data->gpio = gpio;
+ }
return ret ? ret : n;
}
@@ -211,7 +220,8 @@
device_remove_file(led->dev, &dev_attr_inverted);
device_remove_file(led->dev, &dev_attr_desired_brightness);
flush_work(&gpio_data->work);
- free_irq(gpio_to_irq(gpio_data->gpio),led);
+ if (gpio_data->gpio != 0)
+ free_irq(gpio_to_irq(gpio_data->gpio), led);
kfree(gpio_data);
}
}
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
index 4d686c0..9ab5b0c 100644
--- a/drivers/macintosh/via-maciisi.c
+++ b/drivers/macintosh/via-maciisi.c
@@ -288,7 +288,7 @@
}
/* This could be BAD... when the ADB controller doesn't respond
* for this long, it's probably not coming back :-( */
- if(count >= 50) /* Hopefully shouldn't happen */
+ if (count > 50) /* Hopefully shouldn't happen */
printk(KERN_ERR "maciisi_send_request: poll timed out!\n");
}
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index 3710ff8..556acff 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -171,6 +171,14 @@
*/
chunk_size_ulong = round_up(chunk_size_ulong, PAGE_SIZE >> 9);
+ return dm_exception_store_set_chunk_size(store, chunk_size_ulong,
+ error);
+}
+
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+ unsigned long chunk_size_ulong,
+ char **error)
+{
/* Check chunk_size is a power of 2 */
if (!is_power_of_2(chunk_size_ulong)) {
*error = "Chunk size is not a power of 2";
@@ -183,6 +191,11 @@
return -EINVAL;
}
+ if (chunk_size_ulong > INT_MAX >> SECTOR_SHIFT) {
+ *error = "Chunk size is too high";
+ return -EINVAL;
+ }
+
store->chunk_size = chunk_size_ulong;
store->chunk_mask = chunk_size_ulong - 1;
store->chunk_shift = ffs(chunk_size_ulong) - 1;
diff --git a/drivers/md/dm-exception-store.h b/drivers/md/dm-exception-store.h
index 2442c8c..812c718 100644
--- a/drivers/md/dm-exception-store.h
+++ b/drivers/md/dm-exception-store.h
@@ -168,6 +168,10 @@
int dm_exception_store_type_register(struct dm_exception_store_type *type);
int dm_exception_store_type_unregister(struct dm_exception_store_type *type);
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+ unsigned long chunk_size_ulong,
+ char **error);
+
int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
unsigned *args_used,
struct dm_exception_store **store);
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
index e69b965..652bd33 100644
--- a/drivers/md/dm-log-userspace-base.c
+++ b/drivers/md/dm-log-userspace-base.c
@@ -21,6 +21,7 @@
struct dm_target *ti;
uint32_t region_size;
region_t region_count;
+ uint64_t luid;
char uuid[DM_UUID_LEN];
char *usr_argv_str;
@@ -63,7 +64,7 @@
* restored.
*/
retry:
- r = dm_consult_userspace(uuid, request_type, data,
+ r = dm_consult_userspace(uuid, lc->luid, request_type, data,
data_size, rdata, rdata_size);
if (r != -ESRCH)
@@ -74,14 +75,15 @@
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(2*HZ);
DMWARN("Attempting to contact userspace log server...");
- r = dm_consult_userspace(uuid, DM_ULOG_CTR, lc->usr_argv_str,
+ r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_CTR,
+ lc->usr_argv_str,
strlen(lc->usr_argv_str) + 1,
NULL, NULL);
if (!r)
break;
}
DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete");
- r = dm_consult_userspace(uuid, DM_ULOG_RESUME, NULL,
+ r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_RESUME, NULL,
0, NULL, NULL);
if (!r)
goto retry;
@@ -111,10 +113,9 @@
return -ENOMEM;
}
- for (i = 0, str_size = 0; i < argc; i++)
- str_size += sprintf(str + str_size, "%s ", argv[i]);
- str_size += sprintf(str + str_size, "%llu",
- (unsigned long long)ti->len);
+ str_size = sprintf(str, "%llu", (unsigned long long)ti->len);
+ for (i = 0; i < argc; i++)
+ str_size += sprintf(str + str_size, " %s", argv[i]);
*ctr_str = str;
return str_size;
@@ -154,6 +155,9 @@
return -ENOMEM;
}
+ /* The ptr value is sufficient for local unique id */
+ lc->luid = (uint64_t)lc;
+
lc->ti = ti;
if (strlen(argv[0]) > (DM_UUID_LEN - 1)) {
@@ -173,7 +177,7 @@
}
/* Send table string */
- r = dm_consult_userspace(lc->uuid, DM_ULOG_CTR,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
ctr_str, str_size, NULL, NULL);
if (r == -ESRCH) {
@@ -183,7 +187,7 @@
/* Since the region size does not change, get it now */
rdata_size = sizeof(rdata);
- r = dm_consult_userspace(lc->uuid, DM_ULOG_GET_REGION_SIZE,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_GET_REGION_SIZE,
NULL, 0, (char *)&rdata, &rdata_size);
if (r) {
@@ -212,7 +216,7 @@
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_DTR,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR,
NULL, 0,
NULL, NULL);
@@ -227,7 +231,7 @@
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_PRESUSPEND,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_PRESUSPEND,
NULL, 0,
NULL, NULL);
@@ -239,7 +243,7 @@
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_POSTSUSPEND,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_POSTSUSPEND,
NULL, 0,
NULL, NULL);
@@ -252,7 +256,7 @@
struct log_c *lc = log->context;
lc->in_sync_hint = 0;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_RESUME,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_RESUME,
NULL, 0,
NULL, NULL);
@@ -561,6 +565,7 @@
char *result, unsigned maxlen)
{
int r = 0;
+ char *table_args;
size_t sz = (size_t)maxlen;
struct log_c *lc = log->context;
@@ -577,8 +582,12 @@
break;
case STATUSTYPE_TABLE:
sz = 0;
- DMEMIT("%s %u %s %s", log->type->name, lc->usr_argc + 1,
- lc->uuid, lc->usr_argv_str);
+ table_args = strchr(lc->usr_argv_str, ' ');
+ BUG_ON(!table_args); /* There will always be a ' ' */
+ table_args++;
+
+ DMEMIT("%s %u %s %s ", log->type->name, lc->usr_argc,
+ lc->uuid, table_args);
break;
}
return (r) ? 0 : (int)sz;
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 8ce74d9..ba0edad 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -147,7 +147,8 @@
/**
* dm_consult_userspace
- * @uuid: log's uuid (must be DM_UUID_LEN in size)
+ * @uuid: log's universal unique identifier (must be DM_UUID_LEN in size)
+ * @luid: log's local unique identifier
* @request_type: found in include/linux/dm-log-userspace.h
* @data: data to tx to the server
* @data_size: size of data in bytes
@@ -163,7 +164,7 @@
*
* Returns: 0 on success, -EXXX on failure
**/
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
char *data, size_t data_size,
char *rdata, size_t *rdata_size)
{
@@ -190,6 +191,7 @@
memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
memcpy(tfr->uuid, uuid, DM_UUID_LEN);
+ tfr->luid = luid;
tfr->seq = dm_ulog_seq++;
/*
diff --git a/drivers/md/dm-log-userspace-transfer.h b/drivers/md/dm-log-userspace-transfer.h
index c26d8e4..04ee874 100644
--- a/drivers/md/dm-log-userspace-transfer.h
+++ b/drivers/md/dm-log-userspace-transfer.h
@@ -11,7 +11,7 @@
int dm_ulog_tfr_init(void);
void dm_ulog_tfr_exit(void);
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
char *data, size_t data_size,
char *rdata, size_t *rdata_size);
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 9726577..33f179e 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -648,7 +648,13 @@
*/
dm_rh_inc_pending(ms->rh, &sync);
dm_rh_inc_pending(ms->rh, &nosync);
- ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0;
+
+ /*
+ * If the flush fails on a previous call and succeeds here,
+ * we must not reset the log_failure variable. We need
+ * userspace interaction to do that.
+ */
+ ms->log_failure = dm_rh_flush(ms->rh) ? 1 : ms->log_failure;
/*
* Dispatch io.
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index 6e3fe4f..d5b2e087 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -106,6 +106,13 @@
void *zero_area;
/*
+ * An area used for header. The header can be written
+ * concurrently with metadata (when invalidating the snapshot),
+ * so it needs a separate buffer.
+ */
+ void *header_area;
+
+ /*
* Used to keep track of which metadata area the data in
* 'chunk' refers to.
*/
@@ -148,16 +155,27 @@
*/
ps->area = vmalloc(len);
if (!ps->area)
- return r;
+ goto err_area;
ps->zero_area = vmalloc(len);
- if (!ps->zero_area) {
- vfree(ps->area);
- return r;
- }
+ if (!ps->zero_area)
+ goto err_zero_area;
memset(ps->zero_area, 0, len);
+ ps->header_area = vmalloc(len);
+ if (!ps->header_area)
+ goto err_header_area;
+
return 0;
+
+err_header_area:
+ vfree(ps->zero_area);
+
+err_zero_area:
+ vfree(ps->area);
+
+err_area:
+ return r;
}
static void free_area(struct pstore *ps)
@@ -169,6 +187,10 @@
if (ps->zero_area)
vfree(ps->zero_area);
ps->zero_area = NULL;
+
+ if (ps->header_area)
+ vfree(ps->header_area);
+ ps->header_area = NULL;
}
struct mdata_req {
@@ -188,7 +210,8 @@
/*
* Read or write a chunk aligned and sized block of data from a device.
*/
-static int chunk_io(struct pstore *ps, chunk_t chunk, int rw, int metadata)
+static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, int rw,
+ int metadata)
{
struct dm_io_region where = {
.bdev = ps->store->cow->bdev,
@@ -198,7 +221,7 @@
struct dm_io_request io_req = {
.bi_rw = rw,
.mem.type = DM_IO_VMA,
- .mem.ptr.vma = ps->area,
+ .mem.ptr.vma = area,
.client = ps->io_client,
.notify.fn = NULL,
};
@@ -240,7 +263,7 @@
chunk = area_location(ps, ps->current_area);
- r = chunk_io(ps, chunk, rw, 0);
+ r = chunk_io(ps, ps->area, chunk, rw, 0);
if (r)
return r;
@@ -254,20 +277,7 @@
static int zero_disk_area(struct pstore *ps, chunk_t area)
{
- struct dm_io_region where = {
- .bdev = ps->store->cow->bdev,
- .sector = ps->store->chunk_size * area_location(ps, area),
- .count = ps->store->chunk_size,
- };
- struct dm_io_request io_req = {
- .bi_rw = WRITE,
- .mem.type = DM_IO_VMA,
- .mem.ptr.vma = ps->zero_area,
- .client = ps->io_client,
- .notify.fn = NULL,
- };
-
- return dm_io(&io_req, 1, &where, NULL);
+ return chunk_io(ps, ps->zero_area, area_location(ps, area), WRITE, 0);
}
static int read_header(struct pstore *ps, int *new_snapshot)
@@ -276,6 +286,7 @@
struct disk_header *dh;
chunk_t chunk_size;
int chunk_size_supplied = 1;
+ char *chunk_err;
/*
* Use default chunk size (or hardsect_size, if larger) if none supplied
@@ -297,11 +308,11 @@
if (r)
return r;
- r = chunk_io(ps, 0, READ, 1);
+ r = chunk_io(ps, ps->header_area, 0, READ, 1);
if (r)
goto bad;
- dh = (struct disk_header *) ps->area;
+ dh = ps->header_area;
if (le32_to_cpu(dh->magic) == 0) {
*new_snapshot = 1;
@@ -319,20 +330,25 @@
ps->version = le32_to_cpu(dh->version);
chunk_size = le32_to_cpu(dh->chunk_size);
- if (!chunk_size_supplied || ps->store->chunk_size == chunk_size)
+ if (ps->store->chunk_size == chunk_size)
return 0;
- DMWARN("chunk size %llu in device metadata overrides "
- "table chunk size of %llu.",
- (unsigned long long)chunk_size,
- (unsigned long long)ps->store->chunk_size);
+ if (chunk_size_supplied)
+ DMWARN("chunk size %llu in device metadata overrides "
+ "table chunk size of %llu.",
+ (unsigned long long)chunk_size,
+ (unsigned long long)ps->store->chunk_size);
/* We had a bogus chunk_size. Fix stuff up. */
free_area(ps);
- ps->store->chunk_size = chunk_size;
- ps->store->chunk_mask = chunk_size - 1;
- ps->store->chunk_shift = ffs(chunk_size) - 1;
+ r = dm_exception_store_set_chunk_size(ps->store, chunk_size,
+ &chunk_err);
+ if (r) {
+ DMERR("invalid on-disk chunk size %llu: %s.",
+ (unsigned long long)chunk_size, chunk_err);
+ return r;
+ }
r = dm_io_client_resize(sectors_to_pages(ps->store->chunk_size),
ps->io_client);
@@ -351,15 +367,15 @@
{
struct disk_header *dh;
- memset(ps->area, 0, ps->store->chunk_size << SECTOR_SHIFT);
+ memset(ps->header_area, 0, ps->store->chunk_size << SECTOR_SHIFT);
- dh = (struct disk_header *) ps->area;
+ dh = ps->header_area;
dh->magic = cpu_to_le32(SNAP_MAGIC);
dh->valid = cpu_to_le32(ps->valid);
dh->version = cpu_to_le32(ps->version);
dh->chunk_size = cpu_to_le32(ps->store->chunk_size);
- return chunk_io(ps, 0, WRITE, 1);
+ return chunk_io(ps, ps->header_area, 0, WRITE, 1);
}
/*
@@ -679,6 +695,8 @@
ps->valid = 1;
ps->version = SNAPSHOT_DISK_VERSION;
ps->area = NULL;
+ ps->zero_area = NULL;
+ ps->header_area = NULL;
ps->next_free = 2; /* skipping the header and first area */
ps->current_committed = 0;
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index d573165..57f1bf7 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1176,6 +1176,15 @@
return 0;
}
+static int snapshot_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct dm_snapshot *snap = ti->private;
+
+ return fn(ti, snap->origin, 0, ti->len, data);
+}
+
+
/*-----------------------------------------------------------------
* Origin methods
*---------------------------------------------------------------*/
@@ -1410,20 +1419,29 @@
return 0;
}
+static int origin_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct dm_dev *dev = ti->private;
+
+ return fn(ti, dev, 0, ti->len, data);
+}
+
static struct target_type origin_target = {
.name = "snapshot-origin",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = origin_ctr,
.dtr = origin_dtr,
.map = origin_map,
.resume = origin_resume,
.status = origin_status,
+ .iterate_devices = origin_iterate_devices,
};
static struct target_type snapshot_target = {
.name = "snapshot",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = snapshot_ctr,
.dtr = snapshot_dtr,
@@ -1431,6 +1449,7 @@
.end_io = snapshot_end_io,
.resume = snapshot_resume,
.status = snapshot_status,
+ .iterate_devices = snapshot_iterate_devices,
};
static int __init dm_snapshot_init(void)
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index 4e0e593..3e563d2 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -329,9 +329,19 @@
return ret;
}
+static void stripe_io_hints(struct dm_target *ti,
+ struct queue_limits *limits)
+{
+ struct stripe_c *sc = ti->private;
+ unsigned chunk_size = (sc->chunk_mask + 1) << 9;
+
+ blk_limits_io_min(limits, chunk_size);
+ limits->io_opt = chunk_size * sc->stripes;
+}
+
static struct target_type stripe_target = {
.name = "striped",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.module = THIS_MODULE,
.ctr = stripe_ctr,
.dtr = stripe_dtr,
@@ -339,6 +349,7 @@
.end_io = stripe_end_io,
.status = stripe_status,
.iterate_devices = stripe_iterate_devices,
+ .io_hints = stripe_io_hints,
};
int __init dm_stripe_init(void)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index d952b34..1a6cb3c 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -343,10 +343,10 @@
}
/*
- * If possible, this checks an area of a destination device is valid.
+ * If possible, this checks an area of a destination device is invalid.
*/
-static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct queue_limits *limits = data;
struct block_device *bdev = dev->bdev;
@@ -357,36 +357,40 @@
char b[BDEVNAME_SIZE];
if (!dev_size)
- return 1;
+ return 0;
if ((start >= dev_size) || (start + len > dev_size)) {
- DMWARN("%s: %s too small for target",
- dm_device_name(ti->table->md), bdevname(bdev, b));
- return 0;
+ DMWARN("%s: %s too small for target: "
+ "start=%llu, len=%llu, dev_size=%llu",
+ dm_device_name(ti->table->md), bdevname(bdev, b),
+ (unsigned long long)start,
+ (unsigned long long)len,
+ (unsigned long long)dev_size);
+ return 1;
}
if (logical_block_size_sectors <= 1)
- return 1;
+ return 0;
if (start & (logical_block_size_sectors - 1)) {
DMWARN("%s: start=%llu not aligned to h/w "
- "logical block size %hu of %s",
+ "logical block size %u of %s",
dm_device_name(ti->table->md),
(unsigned long long)start,
limits->logical_block_size, bdevname(bdev, b));
- return 0;
+ return 1;
}
if (len & (logical_block_size_sectors - 1)) {
DMWARN("%s: len=%llu not aligned to h/w "
- "logical block size %hu of %s",
+ "logical block size %u of %s",
dm_device_name(ti->table->md),
(unsigned long long)len,
limits->logical_block_size, bdevname(bdev, b));
- return 0;
+ return 1;
}
- return 1;
+ return 0;
}
/*
@@ -496,8 +500,15 @@
}
if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
- DMWARN("%s: target device %s is misaligned",
- dm_device_name(ti->table->md), bdevname(bdev, b));
+ DMWARN("%s: target device %s is misaligned: "
+ "physical_block_size=%u, logical_block_size=%u, "
+ "alignment_offset=%u, start=%llu",
+ dm_device_name(ti->table->md), bdevname(bdev, b),
+ q->limits.physical_block_size,
+ q->limits.logical_block_size,
+ q->limits.alignment_offset,
+ (unsigned long long) start << 9);
+
/*
* Check if merge fn is supported.
@@ -698,7 +709,7 @@
if (remaining) {
DMWARN("%s: table line %u (start sect %llu len %llu) "
- "not aligned to h/w logical block size %hu",
+ "not aligned to h/w logical block size %u",
dm_device_name(table->md), i,
(unsigned long long) ti->begin,
(unsigned long long) ti->len,
@@ -996,12 +1007,16 @@
ti->type->iterate_devices(ti, dm_set_device_limits,
&ti_limits);
+ /* Set I/O hints portion of queue limits */
+ if (ti->type->io_hints)
+ ti->type->io_hints(ti, &ti_limits);
+
/*
* Check each device area is consistent with the target's
* overall queue limits.
*/
- if (!ti->type->iterate_devices(ti, device_area_is_valid,
- &ti_limits))
+ if (ti->type->iterate_devices(ti, device_area_is_invalid,
+ &ti_limits))
return -EINVAL;
combine_limits:
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 8a311ea..b4845b1 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -738,16 +738,22 @@
dm_put(md);
}
+static void free_rq_clone(struct request *clone)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+
+ blk_rq_unprep_clone(clone);
+ free_rq_tio(tio);
+}
+
static void dm_unprep_request(struct request *rq)
{
struct request *clone = rq->special;
- struct dm_rq_target_io *tio = clone->end_io_data;
rq->special = NULL;
rq->cmd_flags &= ~REQ_DONTPREP;
- blk_rq_unprep_clone(clone);
- free_rq_tio(tio);
+ free_rq_clone(clone);
}
/*
@@ -825,8 +831,7 @@
rq->sense_len = clone->sense_len;
}
- BUG_ON(clone->bio);
- free_rq_tio(tio);
+ free_rq_clone(clone);
blk_end_request_all(rq, error);
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 8280f8d..8c9ae0a 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -904,7 +904,7 @@
static int dvb_net_tx(struct sk_buff *skb, struct net_device *dev)
{
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static u8 mask_normal[6]={0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index 88847d1..8c1aed7 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -2,25 +2,33 @@
# Siano Mobile Silicon Digital TV device configuration
#
-config DVB_SIANO_SMS1XXX
- tristate "Siano SMS1XXX USB dongle support"
- depends on DVB_CORE && USB && INPUT
+config SMS_SIANO_MDTV
+ tristate "Siano SMS1xxx based MDTV receiver"
+ depends on DVB_CORE && INPUT
---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset.
+ Choose Y or M here if you have MDTV receiver with a Siano chipset.
- To compile this driver as a module, choose M here: the
- module will be called sms1xxx.
+ To compile this driver as a module, choose M here
+ (The module will be called smsmdtv).
-config DVB_SIANO_SMS1XXX_SMS_IDS
- bool "Enable support for Siano Mobile Silicon default USB IDs"
- depends on DVB_SIANO_SMS1XXX
- default y
+ Further documentation on this driver can be found on the WWW
+ at http://www.siano-ms.com/
+
+if SMS_SIANO_MDTV
+menu "Siano module components"
+
+# Hardware interfaces support
+
+config SMS_USB_DRV
+ tristate "USB interface support"
+ depends on DVB_CORE && USB
---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset
- that uses Siano Mobile Silicon's default usb vid:pid.
+ Choose if you would like to have Siano's support for USB interface
- Choose N here if you would prefer to use Siano's external driver.
-
- Further documentation on this driver can be found on the WWW at
- <http://www.siano-ms.com/>.
-
+config SMS_SDIO_DRV
+ tristate "SDIO interface support"
+ depends on DVB_CORE && MMC
+ ---help---
+ Choose if you would like to have Siano's support for SDIO interface
+endmenu
+endif # SMS_SIANO_MDTV
diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile
index c6644d9..c54140b 100644
--- a/drivers/media/dvb/siano/Makefile
+++ b/drivers/media/dvb/siano/Makefile
@@ -1,8 +1,9 @@
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsdvb.o
+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 3ee1c39..266033a 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -325,6 +325,16 @@
0 : -ETIME;
}
+static inline int led_feedback(struct smsdvb_client_t *client)
+{
+ if (client->fe_status & FE_HAS_LOCK)
+ return sms_board_led_feedback(client->coredev,
+ (client->sms_stat_dvb.ReceptionData.BER
+ == 0) ? SMS_LED_HI : SMS_LED_LO);
+ else
+ return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+}
+
static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct smsdvb_client_t *client;
@@ -332,6 +342,8 @@
*stat = client->fe_status;
+ led_feedback(client);
+
return 0;
}
@@ -342,6 +354,8 @@
*ber = client->sms_stat_dvb.ReceptionData.BER;
+ led_feedback(client);
+
return 0;
}
@@ -359,6 +373,8 @@
(client->sms_stat_dvb.ReceptionData.InBandPwr
+ 95) * 3 / 2;
+ led_feedback(client);
+
return 0;
}
@@ -369,6 +385,8 @@
*snr = client->sms_stat_dvb.ReceptionData.SNR;
+ led_feedback(client);
+
return 0;
}
@@ -379,6 +397,8 @@
*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
+ led_feedback(client);
+
return 0;
}
@@ -404,6 +424,8 @@
u32 Data[3];
} Msg;
+ int ret;
+
client->fe_status = FE_HAS_SIGNAL;
client->event_fe_state = -1;
client->event_unc_state = -1;
@@ -426,6 +448,23 @@
case BANDWIDTH_AUTO: return -EOPNOTSUPP;
default: return -EINVAL;
}
+ /* Disable LNA, if any. An error is returned if no LNA is present */
+ ret = sms_board_lna_control(client->coredev, 0);
+ if (ret == 0) {
+ fe_status_t status;
+
+ /* tune with LNA off at first */
+ ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+ &client->tune_done);
+
+ smsdvb_read_status(fe, &status);
+
+ if (status & FE_HAS_LOCK)
+ return ret;
+
+ /* previous tune didnt lock - enable LNA and tune again */
+ sms_board_lna_control(client->coredev, 1);
+ }
return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
&client->tune_done);
@@ -451,6 +490,8 @@
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_power(client->coredev, 1);
+
sms_board_dvb3_event(client, DVB3_EVENT_INIT);
return 0;
}
@@ -460,6 +501,9 @@
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+ sms_board_power(client->coredev, 0);
+
sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
return 0;
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
index dfaa49a..d1d652e 100644
--- a/drivers/media/dvb/siano/smssdio.c
+++ b/drivers/media/dvb/siano/smssdio.c
@@ -46,6 +46,7 @@
#define SMSSDIO_DATA 0x00
#define SMSSDIO_INT 0x04
+#define SMSSDIO_BLOCK_SIZE 128
static const struct sdio_device_id smssdio_ids[] = {
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
@@ -85,7 +86,8 @@
sdio_claim_host(smsdev->func);
while (size >= smsdev->func->cur_blksize) {
- ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, smsdev->func->cur_blksize);
if (ret)
goto out;
@@ -94,8 +96,8 @@
}
if (size) {
- ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
- buffer, size);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, size);
}
out:
@@ -125,23 +127,23 @@
*/
isr = sdio_readb(func, SMSSDIO_INT, &ret);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Unable to read interrupt register!\n");
+ sms_err("Unable to read interrupt register!\n");
return;
}
if (smsdev->split_cb == NULL) {
cb = smscore_getbuffer(smsdev->coredev);
if (!cb) {
- dev_err(&smsdev->func->dev,
- "Unable to allocate data buffer!\n");
+ sms_err("Unable to allocate data buffer!\n");
return;
}
- ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ cb->p,
+ SMSSDIO_DATA,
+ SMSSDIO_BLOCK_SIZE);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Error %d reading initial block!\n", ret);
+ sms_err("Error %d reading initial block!\n", ret);
return;
}
@@ -152,7 +154,10 @@
return;
}
- size = hdr->msgLength - smsdev->func->cur_blksize;
+ if (hdr->msgLength > smsdev->func->cur_blksize)
+ size = hdr->msgLength - smsdev->func->cur_blksize;
+ else
+ size = 0;
} else {
cb = smsdev->split_cb;
hdr = cb->p;
@@ -162,23 +167,24 @@
smsdev->split_cb = NULL;
}
- if (hdr->msgLength > smsdev->func->cur_blksize) {
+ if (size) {
void *buffer;
- size = ALIGN(size, 128);
- buffer = cb->p + hdr->msgLength;
+ buffer = cb->p + (hdr->msgLength - size);
+ size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
- BUG_ON(smsdev->func->cur_blksize != 128);
+ BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
/*
* First attempt to transfer all of it in one go...
*/
- ret = sdio_read_blocks(smsdev->func, buffer,
- SMSSDIO_DATA, size / 128);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer,
+ SMSSDIO_DATA,
+ size);
if (ret && ret != -EINVAL) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading data from card!\n", ret);
+ sms_err("Error %d reading data from card!\n", ret);
return;
}
@@ -191,12 +197,12 @@
*/
if (ret == -EINVAL) {
while (size) {
- ret = sdio_read_blocks(smsdev->func,
- buffer, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer, SMSSDIO_DATA,
+ smsdev->func->cur_blksize);
if (ret) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading "
+ sms_err("Error %d reading "
"data from card!\n", ret);
return;
}
@@ -269,7 +275,7 @@
if (ret)
goto release;
- ret = sdio_set_block_size(func, 128);
+ ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
if (ret)
goto disable;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ed281f5..1c2e544 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1730,6 +1730,25 @@
EM28XX_I2C_FREQ_100_KHZ;
}
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+
+ return 0;
+}
+
+
/* FIXME: Should be replaced by a proper mt9m001 driver */
static int em28xx_initialize_mt9m001(struct em28xx *dev)
{
@@ -1758,7 +1777,7 @@
/* HINT method: webcam I2C chips
*
- * This method work for webcams with Micron sensors
+ * This method works for webcams with Micron sensors
*/
static int em28xx_hint_sensor(struct em28xx *dev)
{
@@ -1804,6 +1823,23 @@
dev->vinctl = 0x00;
break;
+
+ case 0x143a: /* MT9M111 as found in the ECS G200 */
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9m111";
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ em28xx_initialize_mt9m111(dev);
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
+
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
+
+ break;
+
case 0x8431:
dev->model = EM2750_BOARD_UNKNOWN;
em28xx_set_model(dev);
@@ -1820,7 +1856,7 @@
break;
default:
- printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
+ printk("Unknown Micron Sensor 0x%04x\n", version);
return -EINVAL;
}
@@ -2346,7 +2382,9 @@
}
em28xx_tuner_setup(dev);
- em28xx_ir_init(dev);
+
+ if(!disable_ir)
+ em28xx_ir_init(dev);
}
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8c2dc38..a2add61 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -367,6 +367,7 @@
EM28XX_NOSENSOR = 0,
EM28XX_MT9V011,
EM28XX_MT9M001,
+ EM28XX_MT9M111,
};
enum em28xx_adecoder {
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 34f46f2..e994dca 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -114,7 +114,7 @@
config USB_GSPCA_SN9C20X_EVDEV
bool "Enable evdev support"
- depends on USB_GSPCA_SN9C20X
+ depends on USB_GSPCA_SN9C20X && INPUT
---help---
Say Y here in order to enable evdev support for sn9c20x webcam button.
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index fc976f4..2622a6e 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -695,7 +695,7 @@
for (i = 0; i < 2; i++) {
err =
send_control_msg(udev, 1, init[cam->method][i].value,
- 0, init[i][cam->method].bytes,
+ 0, init[cam->method][i].bytes,
init[cam->method][i].size);
if (err < 0) {
dev_err(&udev->dev, "error during release sequence\n");
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index a9e48e2..bc2ec21 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -795,7 +795,7 @@
IOC_AND_NETDEV_NAMES_s_s(dev),
le32_to_cpu(pSimple->FlagsLength)));
- return 0;
+ return NETDEV_TX_OK;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 68ab39d..df1f86b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -233,6 +233,19 @@
This driver can also be built as a module. If so, the module
will be called isl29003.
+config EP93XX_PWM
+ tristate "EP93xx PWM support"
+ depends on ARCH_EP93XX
+ help
+ This option enables device driver support for the PWM channels
+ on the Cirrus EP93xx processors. The EP9307 chip only has one
+ PWM channel all the others have two, the second channel is an
+ alternate function of the EGPIO14 pin. A sysfs interface is
+ provided to control the PWM channels.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ep93xx_pwm.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 36f733c..f982d2e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
+obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
obj-$(CONFIG_C2PORT) += c2port/
obj-y += eeprom/
obj-y += cb710/
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
new file mode 100644
index 0000000..ba46941
--- /dev/null
+++ b/drivers/misc/ep93xx_pwm.c
@@ -0,0 +1,384 @@
+/*
+ * Simple PWM driver for EP93XX
+ *
+ * (c) Copyright 2009 Matthieu Crapet <mcrapet@gmail.com>
+ * (c) Copyright 2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * EP9307 has only one channel:
+ * - PWMOUT
+ *
+ * EP9301/02/12/15 have two channels:
+ * - PWMOUT
+ * - PWMOUT1 (alternate function for EGPIO14)
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/platform.h>
+
+#define EP93XX_PWMx_TERM_COUNT 0x00
+#define EP93XX_PWMx_DUTY_CYCLE 0x04
+#define EP93XX_PWMx_ENABLE 0x08
+#define EP93XX_PWMx_INVERT 0x0C
+
+#define EP93XX_PWM_MAX_COUNT 0xFFFF
+
+struct ep93xx_pwm {
+ void __iomem *mmio_base;
+ struct clk *clk;
+ u32 duty_percent;
+};
+
+static inline void ep93xx_pwm_writel(struct ep93xx_pwm *pwm,
+ unsigned int val, unsigned int off)
+{
+ __raw_writel(val, pwm->mmio_base + off);
+}
+
+static inline unsigned int ep93xx_pwm_readl(struct ep93xx_pwm *pwm,
+ unsigned int off)
+{
+ return __raw_readl(pwm->mmio_base + off);
+}
+
+static inline void ep93xx_pwm_write_tc(struct ep93xx_pwm *pwm, u16 value)
+{
+ ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_TERM_COUNT);
+}
+
+static inline u16 ep93xx_pwm_read_tc(struct ep93xx_pwm *pwm)
+{
+ return ep93xx_pwm_readl(pwm, EP93XX_PWMx_TERM_COUNT);
+}
+
+static inline void ep93xx_pwm_write_dc(struct ep93xx_pwm *pwm, u16 value)
+{
+ ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_DUTY_CYCLE);
+}
+
+static inline void ep93xx_pwm_enable(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_ENABLE);
+}
+
+static inline void ep93xx_pwm_disable(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_ENABLE);
+}
+
+static inline int ep93xx_pwm_is_enabled(struct ep93xx_pwm *pwm)
+{
+ return ep93xx_pwm_readl(pwm, EP93XX_PWMx_ENABLE) & 0x1;
+}
+
+static inline void ep93xx_pwm_invert(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_INVERT);
+}
+
+static inline void ep93xx_pwm_normal(struct ep93xx_pwm *pwm)
+{
+ ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_INVERT);
+}
+
+static inline int ep93xx_pwm_is_inverted(struct ep93xx_pwm *pwm)
+{
+ return ep93xx_pwm_readl(pwm, EP93XX_PWMx_INVERT) & 0x1;
+}
+
+/*
+ * /sys/devices/platform/ep93xx-pwm.N
+ * /min_freq read-only minimum pwm output frequency
+ * /max_req read-only maximum pwm output frequency
+ * /freq read-write pwm output frequency (0 = disable output)
+ * /duty_percent read-write pwm duty cycle percent (1..99)
+ * /invert read-write invert pwm output
+ */
+
+static ssize_t ep93xx_pwm_get_min_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ unsigned long rate = clk_get_rate(pwm->clk);
+
+ return sprintf(buf, "%ld\n", rate / (EP93XX_PWM_MAX_COUNT + 1));
+}
+
+static ssize_t ep93xx_pwm_get_max_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ unsigned long rate = clk_get_rate(pwm->clk);
+
+ return sprintf(buf, "%ld\n", rate / 2);
+}
+
+static ssize_t ep93xx_pwm_get_freq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+ if (ep93xx_pwm_is_enabled(pwm)) {
+ unsigned long rate = clk_get_rate(pwm->clk);
+ u16 term = ep93xx_pwm_read_tc(pwm);
+
+ return sprintf(buf, "%ld\n", rate / (term + 1));
+ } else {
+ return sprintf(buf, "disabled\n");
+ }
+}
+
+static ssize_t ep93xx_pwm_set_freq(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return -EINVAL;
+
+ if (val == 0) {
+ ep93xx_pwm_disable(pwm);
+ } else if (val <= (clk_get_rate(pwm->clk) / 2)) {
+ u32 term, duty;
+
+ val = (clk_get_rate(pwm->clk) / val) - 1;
+ if (val > EP93XX_PWM_MAX_COUNT)
+ val = EP93XX_PWM_MAX_COUNT;
+ if (val < 1)
+ val = 1;
+
+ term = ep93xx_pwm_read_tc(pwm);
+ duty = ((val + 1) * pwm->duty_percent / 100) - 1;
+
+ /* If pwm is running, order is important */
+ if (val > term) {
+ ep93xx_pwm_write_tc(pwm, val);
+ ep93xx_pwm_write_dc(pwm, duty);
+ } else {
+ ep93xx_pwm_write_dc(pwm, duty);
+ ep93xx_pwm_write_tc(pwm, val);
+ }
+
+ if (!ep93xx_pwm_is_enabled(pwm))
+ ep93xx_pwm_enable(pwm);
+ } else {
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t ep93xx_pwm_get_duty_percent(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+ return sprintf(buf, "%d\n", pwm->duty_percent);
+}
+
+static ssize_t ep93xx_pwm_set_duty_percent(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return -EINVAL;
+
+ if (val > 0 && val < 100) {
+ u32 term = ep93xx_pwm_read_tc(pwm);
+ ep93xx_pwm_write_dc(pwm, ((term + 1) * val / 100) - 1);
+ pwm->duty_percent = val;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t ep93xx_pwm_get_invert(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+ return sprintf(buf, "%d\n", ep93xx_pwm_is_inverted(pwm));
+}
+
+static ssize_t ep93xx_pwm_set_invert(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return -EINVAL;
+
+ if (val == 0)
+ ep93xx_pwm_normal(pwm);
+ else if (val == 1)
+ ep93xx_pwm_invert(pwm);
+ else
+ return -EINVAL;
+
+ return count;
+}
+
+static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL);
+static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL);
+static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO,
+ ep93xx_pwm_get_freq, ep93xx_pwm_set_freq);
+static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO,
+ ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent);
+static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO,
+ ep93xx_pwm_get_invert, ep93xx_pwm_set_invert);
+
+static struct attribute *ep93xx_pwm_attrs[] = {
+ &dev_attr_min_freq.attr,
+ &dev_attr_max_freq.attr,
+ &dev_attr_freq.attr,
+ &dev_attr_duty_percent.attr,
+ &dev_attr_invert.attr,
+ NULL
+};
+
+static const struct attribute_group ep93xx_pwm_sysfs_files = {
+ .attrs = ep93xx_pwm_attrs,
+};
+
+static int __init ep93xx_pwm_probe(struct platform_device *pdev)
+{
+ struct ep93xx_pwm *pwm;
+ struct resource *res;
+ int err;
+
+ err = ep93xx_pwm_acquire_gpio(pdev);
+ if (err)
+ return err;
+
+ pwm = kzalloc(sizeof(struct ep93xx_pwm), GFP_KERNEL);
+ if (!pwm) {
+ err = -ENOMEM;
+ goto fail_no_mem;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ err = -ENXIO;
+ goto fail_no_mem_resource;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL) {
+ err = -EBUSY;
+ goto fail_no_mem_resource;
+ }
+
+ pwm->mmio_base = ioremap(res->start, resource_size(res));
+ if (pwm->mmio_base == NULL) {
+ err = -ENXIO;
+ goto fail_no_ioremap;
+ }
+
+ err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+ if (err)
+ goto fail_no_sysfs;
+
+ pwm->clk = clk_get(&pdev->dev, "pwm_clk");
+ if (IS_ERR(pwm->clk)) {
+ err = PTR_ERR(pwm->clk);
+ goto fail_no_clk;
+ }
+
+ pwm->duty_percent = 50;
+
+ platform_set_drvdata(pdev, pwm);
+
+ /* disable pwm at startup. Avoids zero value. */
+ ep93xx_pwm_disable(pwm);
+ ep93xx_pwm_write_tc(pwm, EP93XX_PWM_MAX_COUNT);
+ ep93xx_pwm_write_dc(pwm, EP93XX_PWM_MAX_COUNT / 2);
+
+ clk_enable(pwm->clk);
+
+ return 0;
+
+fail_no_clk:
+ sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+fail_no_sysfs:
+ iounmap(pwm->mmio_base);
+fail_no_ioremap:
+ release_mem_region(res->start, resource_size(res));
+fail_no_mem_resource:
+ kfree(pwm);
+fail_no_mem:
+ ep93xx_pwm_release_gpio(pdev);
+ return err;
+}
+
+static int __exit ep93xx_pwm_remove(struct platform_device *pdev)
+{
+ struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ep93xx_pwm_disable(pwm);
+ clk_disable(pwm->clk);
+ clk_put(pwm->clk);
+ platform_set_drvdata(pdev, NULL);
+ sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+ iounmap(pwm->mmio_base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(pwm);
+ ep93xx_pwm_release_gpio(pdev);
+
+ return 0;
+}
+
+static struct platform_driver ep93xx_pwm_driver = {
+ .driver = {
+ .name = "ep93xx-pwm",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(ep93xx_pwm_remove),
+};
+
+static int __init ep93xx_pwm_init(void)
+{
+ return platform_driver_probe(&ep93xx_pwm_driver, ep93xx_pwm_probe);
+}
+
+static void __exit ep93xx_pwm_exit(void)
+{
+ platform_driver_unregister(&ep93xx_pwm_driver);
+}
+
+module_init(ep93xx_pwm_init);
+module_exit(ep93xx_pwm_exit);
+
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, "
+ "H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx PWM driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-pwm");
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 5d778ec..16f0abd 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -240,7 +240,6 @@
(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
skb_end_pointer(skb), skb->len);
- xpnet_device->last_rx = jiffies;
xpnet_device->stats.rx_packets++;
xpnet_device->stats.rx_bytes += skb->len + ETH_HLEN;
@@ -436,7 +435,7 @@
if (skb->data[0] == 0x33) {
dev_kfree_skb(skb);
- return 0; /* nothing needed to be done */
+ return NETDEV_TX_OK; /* nothing needed to be done */
}
/*
@@ -503,7 +502,7 @@
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e1aa847..8741d0f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -21,6 +21,7 @@
#include <linux/amba/bus.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
+#include <linux/gpio.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
@@ -430,7 +431,7 @@
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
}
@@ -443,7 +444,7 @@
break;
case MMC_POWER_UP:
/* The ST version does not have this, fall through to POWER_ON */
- if (host->hw_designer != 0x80) {
+ if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP;
break;
}
@@ -453,7 +454,7 @@
}
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
- if (host->hw_designer != 0x80)
+ if (host->hw_designer != AMBA_VENDOR_ST)
pwr |= MCI_ROD;
else {
/*
@@ -472,17 +473,41 @@
}
}
+static int mmci_get_ro(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+
+ if (host->gpio_wp == -ENOSYS)
+ return -ENOSYS;
+
+ return gpio_get_value(host->gpio_wp);
+}
+
+static int mmci_get_cd(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+ unsigned int status;
+
+ if (host->gpio_cd == -ENOSYS)
+ status = host->plat->status(mmc_dev(host->mmc));
+ else
+ status = gpio_get_value(host->gpio_cd);
+
+ return !status;
+}
+
static const struct mmc_host_ops mmci_ops = {
.request = mmci_request,
.set_ios = mmci_set_ios,
+ .get_ro = mmci_get_ro,
+ .get_cd = mmci_get_cd,
};
static void mmci_check_status(unsigned long data)
{
struct mmci_host *host = (struct mmci_host *)data;
- unsigned int status;
+ unsigned int status = mmci_get_cd(host->mmc);
- status = host->plat->status(mmc_dev(host->mmc));
if (status ^ host->oldstat)
mmc_detect_change(host->mmc, 0);
@@ -515,12 +540,15 @@
host = mmc_priv(mmc);
host->mmc = mmc;
- /* Bits 12 thru 19 is the designer */
- host->hw_designer = (dev->periphid >> 12) & 0xff;
- /* Bits 20 thru 23 is the revison */
- host->hw_revision = (dev->periphid >> 20) & 0xf;
+
+ host->gpio_wp = -ENOSYS;
+ host->gpio_cd = -ENOSYS;
+
+ host->hw_designer = amba_manf(dev);
+ host->hw_revision = amba_rev(dev);
DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
DBG(host, "revision = 0x%01x\n", host->hw_revision);
+
host->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
@@ -591,6 +619,27 @@
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+#ifdef CONFIG_GPIOLIB
+ if (gpio_is_valid(plat->gpio_cd)) {
+ ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
+ if (ret == 0)
+ ret = gpio_direction_input(plat->gpio_cd);
+ if (ret == 0)
+ host->gpio_cd = plat->gpio_cd;
+ else if (ret != -ENOSYS)
+ goto err_gpio_cd;
+ }
+ if (gpio_is_valid(plat->gpio_wp)) {
+ ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
+ if (ret == 0)
+ ret = gpio_direction_input(plat->gpio_wp);
+ if (ret == 0)
+ host->gpio_wp = plat->gpio_wp;
+ else if (ret != -ENOSYS)
+ goto err_gpio_wp;
+ }
+#endif
+
ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
if (ret)
goto unmap;
@@ -602,6 +651,7 @@
writel(MCI_IRQENABLE, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
+ host->oldstat = mmci_get_cd(host->mmc);
mmc_add_host(mmc);
@@ -620,6 +670,12 @@
irq0_free:
free_irq(dev->irq[0], host);
unmap:
+ if (host->gpio_wp != -ENOSYS)
+ gpio_free(host->gpio_wp);
+ err_gpio_wp:
+ if (host->gpio_cd != -ENOSYS)
+ gpio_free(host->gpio_cd);
+ err_gpio_cd:
iounmap(host->base);
clk_disable:
clk_disable(host->clk);
@@ -655,6 +711,11 @@
free_irq(dev->irq[0], host);
free_irq(dev->irq[1], host);
+ if (host->gpio_wp != -ENOSYS)
+ gpio_free(host->gpio_wp);
+ if (host->gpio_cd != -ENOSYS)
+ gpio_free(host->gpio_cd);
+
iounmap(host->base);
clk_disable(host->clk);
clk_put(host->clk);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0441bac..839f264 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -151,6 +151,8 @@
struct mmc_data *data;
struct mmc_host *mmc;
struct clk *clk;
+ int gpio_cd;
+ int gpio_wp;
unsigned int data_xfered;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index ae5fe91..10ed195 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -736,7 +736,7 @@
flash->partitioned = 1;
return add_mtd_partitions(&flash->mtd, parts, nr_parts);
}
- } else if (data->nr_parts)
+ } else if (data && data->nr_parts)
dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
data->nr_parts, data->name);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 7ad9722..0d9d4bc 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -61,7 +61,7 @@
buf64 = (uint64_t *)buf;
while (i < len/8) {
uint64_t x;
- asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base));
+ asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
i *= 8;
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 2c410a0..0f5562a 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -24,8 +24,11 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <asm/io.h>
+#include <linux/io.h>
+
#include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
#include <asm/sizes.h>
#include <asm/mach-types.h>
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index fb86cac..1002e18 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -135,16 +135,17 @@
int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
size_t *retlen, uint8_t *buf)
{
+ loff_t mask = mtd->writesize - 1;
struct mtd_oob_ops ops;
int res;
ops.mode = MTD_OOB_PLACE;
- ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ res = mtd->read_oob(mtd, offs & ~mask, &ops);
*retlen = ops.oobretlen;
return res;
}
@@ -155,16 +156,17 @@
int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
size_t *retlen, uint8_t *buf)
{
+ loff_t mask = mtd->writesize - 1;
struct mtd_oob_ops ops;
int res;
ops.mode = MTD_OOB_PLACE;
- ops.ooboffs = offs & (mtd->writesize - 1);
+ ops.ooboffs = offs & mask;
ops.ooblen = len;
ops.oobbuf = buf;
ops.datbuf = NULL;
- res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ res = mtd->write_oob(mtd, offs & ~mask, &ops);
*retlen = ops.oobretlen;
return res;
}
@@ -177,17 +179,18 @@
static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len,
size_t *retlen, uint8_t *buf, uint8_t *oob)
{
+ loff_t mask = mtd->writesize - 1;
struct mtd_oob_ops ops;
int res;
ops.mode = MTD_OOB_PLACE;
- ops.ooboffs = offs;
+ ops.ooboffs = offs & mask;
ops.ooblen = mtd->oobsize;
ops.oobbuf = oob;
ops.datbuf = buf;
ops.len = len;
- res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops);
+ res = mtd->write_oob(mtd, offs & ~mask, &ops);
*retlen = ops.retlen;
return res;
}
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 367bec6..f603091 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -409,7 +409,7 @@
* no real choice.
*/
-static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -485,7 +485,7 @@
if (el_debug > 2)
pr_debug(" queued xmit.\n");
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* A receive upset our load, despite our best efforts */
if (el_debug > 2)
diff --git a/drivers/net/3c501.h b/drivers/net/3c501.h
index f40b049..183fd55 100644
--- a/drivers/net/3c501.h
+++ b/drivers/net/3c501.h
@@ -6,7 +6,7 @@
static int el1_probe1(struct net_device *dev, int ioaddr);
static int el_open(struct net_device *dev);
static void el_timeout(struct net_device *dev);
-static int el_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t el_interrupt(int irq, void *dev_id);
static void el_receive(struct net_device *dev);
static void el_reset(struct net_device *dev);
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index 134638a..c71e12d 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -383,7 +383,7 @@
static int
el2_open(struct net_device *dev)
{
- int retval = -EAGAIN;
+ int retval;
if (dev->irq < 2) {
int irqlist[] = {5, 9, 3, 4, 0};
@@ -391,7 +391,8 @@
outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */
do {
- if (request_irq (*irqp, NULL, 0, "bogus", dev) != -EBUSY) {
+ retval = request_irq(*irqp, NULL, 0, "bogus", dev);
+ if (retval >= 0) {
/* Twinkle the interrupt, and check if it's seen. */
unsigned long cookie = probe_irq_on();
outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
@@ -400,11 +401,14 @@
&& ((retval = request_irq(dev->irq = *irqp,
eip_interrupt, 0, dev->name, dev)) == 0))
break;
+ } else {
+ if (retval != -EBUSY)
+ return retval;
}
} while (*++irqp);
if (*irqp == 0) {
outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
- return retval;
+ return -EAGAIN;
}
} else {
if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index f71b354..a21c9d1 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -976,7 +976,7 @@
*
******************************************************/
-static bool send_packet(struct net_device *dev, struct sk_buff *skb)
+static netdev_tx_t send_packet(struct net_device *dev, struct sk_buff *skb)
{
elp_device *adapter = netdev_priv(dev);
unsigned long target;
@@ -1067,7 +1067,7 @@
*
******************************************************/
-static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
elp_device *adapter = netdev_priv(dev);
@@ -1101,7 +1101,7 @@
prime_rx(dev);
spin_unlock_irqrestore(&adapter->lock, flags);
netif_start_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
/******************************************************
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c
index 96b8665..a6dc8bc 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/3c507.c
@@ -284,7 +284,8 @@
static int el16_probe1(struct net_device *dev, int ioaddr);
static int el16_open(struct net_device *dev);
-static int el16_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t el16_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t el16_interrupt(int irq, void *dev_id);
static void el16_rx(struct net_device *dev);
static int el16_close(struct net_device *dev);
@@ -509,7 +510,8 @@
}
-static int el16_send_packet (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t el16_send_packet (struct sk_buff *skb,
+ struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -537,7 +539,7 @@
/* You might need to clean up and record Tx statistics here. */
- return 0;
+ return NETDEV_TX_OK;
}
/* The typical workload of the driver:
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index d2137ef..3b00a4e 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -191,7 +191,7 @@
static ushort id_read_eeprom(int index);
static ushort read_eeprom(int ioaddr, int index);
static int el3_open(struct net_device *dev);
-static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t el3_interrupt(int irq, void *dev_id);
static void update_stats(struct net_device *dev);
static struct net_device_stats *el3_get_stats(struct net_device *dev);
@@ -816,7 +816,7 @@
}
-static int
+static netdev_tx_t
el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
@@ -892,7 +892,7 @@
outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
}
}
- return 0;
+ return NETDEV_TX_OK;
}
/* The EL3 interrupt handler. */
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 4a7c328..4adcb950 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -369,8 +369,8 @@
struct pnp_dev *idev, int card_number);
static int corkscrew_open(struct net_device *dev);
static void corkscrew_timer(unsigned long arg);
-static int corkscrew_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int corkscrew_rx(struct net_device *dev);
static void corkscrew_timeout(struct net_device *dev);
static int boomerang_rx(struct net_device *dev);
@@ -998,8 +998,8 @@
netif_wake_queue(dev);
}
-static int corkscrew_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct corkscrew_private *vp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -1056,7 +1056,7 @@
netif_wake_queue(dev);
}
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* Put out the doubleword header... */
outl(skb->len, ioaddr + TX_FIFO);
@@ -1119,7 +1119,7 @@
outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
}
}
- return 0;
+ return NETDEV_TX_OK;
}
/* The interrupt handler does all of the Rx thread work and cleans up
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index cdd955c..cb0b7307 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -183,7 +183,7 @@
static irqreturn_t elmc_interrupt(int irq, void *dev_id);
static int elmc_open(struct net_device *dev);
static int elmc_close(struct net_device *dev);
-static int elmc_send_packet(struct sk_buff *, struct net_device *);
+static netdev_tx_t elmc_send_packet(struct sk_buff *, struct net_device *);
static struct net_device_stats *elmc_get_stats(struct net_device *dev);
static void elmc_timeout(struct net_device *dev);
#ifdef ELMC_MULTICAST
@@ -1129,7 +1129,7 @@
* send frame
*/
-static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
{
int len;
int i;
@@ -1198,7 +1198,7 @@
netif_wake_queue(dev);
dev_kfree_skb(skb);
#endif
- return 0;
+ return NETDEV_TX_OK;
}
/*******************************************
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index aaa8a9f..6021e6d 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -213,7 +213,8 @@
static int mc32_command(struct net_device *dev, u16 cmd, void *data, int len);
static int mc32_open(struct net_device *dev);
static void mc32_timeout(struct net_device *dev);
-static int mc32_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t mc32_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t mc32_interrupt(int irq, void *dev_id);
static int mc32_close(struct net_device *dev);
static struct net_device_stats *mc32_get_stats(struct net_device *dev);
@@ -1020,7 +1021,8 @@
*
*/
-static int mc32_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t mc32_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct mc32_local *lp = netdev_priv(dev);
u32 head = atomic_read(&lp->tx_ring_head);
@@ -1035,7 +1037,7 @@
if (skb_padto(skb, ETH_ZLEN)) {
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
atomic_dec(&lp->tx_count);
@@ -1066,7 +1068,7 @@
p->control &= ~CONTROL_EOL;
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 4567588..7adff4d 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -716,8 +716,10 @@
static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
static void vortex_timer(unsigned long arg);
static void rx_oom_timer(unsigned long arg);
-static int vortex_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t vortex_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int vortex_rx(struct net_device *dev);
static int boomerang_rx(struct net_device *dev);
static irqreturn_t vortex_interrupt(int irq, void *dev_id);
@@ -2035,7 +2037,7 @@
}
}
-static int
+static netdev_tx_t
vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct vortex_private *vp = netdev_priv(dev);
@@ -2087,10 +2089,10 @@
iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
}
}
- return 0;
+ return NETDEV_TX_OK;
}
-static int
+static netdev_tx_t
boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct vortex_private *vp = netdev_priv(dev);
@@ -2177,7 +2179,7 @@
iowrite16(DownUnstall, ioaddr + EL3_CMD);
spin_unlock_irqrestore(&vp->lock, flags);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* The interrupt handler does all of the Rx thread work and cleans up
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 69f5b7d..b1e5764 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -585,7 +585,7 @@
lp->tx_full = 1;
spin_unlock_irqrestore (&lp->devlock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(lance_start_xmit);
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index d0dbbf3..462d9f59 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -736,7 +736,8 @@
netif_wake_queue(cp->dev);
}
-static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
@@ -890,7 +891,7 @@
cpw8(TxPoll, NormalTxPoll);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* Set or clear the multicast filter for this adaptor.
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 0e2ba21..4a36287 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -628,8 +628,8 @@
static void rtl8139_start_thread(struct rtl8139_private *tp);
static void rtl8139_tx_timeout (struct net_device *dev);
static void rtl8139_init_ring (struct net_device *dev);
-static int rtl8139_start_xmit (struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void rtl8139_poll_controller(struct net_device *dev);
#endif
@@ -1687,7 +1687,8 @@
}
}
-static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
@@ -1707,7 +1708,7 @@
} else {
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&tp->lock, flags);
@@ -1732,7 +1733,7 @@
pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
dev->name, len, entry);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 7754754..ea6b139 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -356,7 +356,7 @@
0x7f /* *multi IA */ };
static int i596_open(struct net_device *dev);
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t i596_interrupt(int irq, void *dev_id);
static int i596_close(struct net_device *dev);
static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
@@ -1054,8 +1054,7 @@
netif_wake_queue (dev);
}
-
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct i596_private *lp = dev->ml_priv;
struct tx_cmd *tx_cmd;
@@ -1068,7 +1067,7 @@
if (skb->len < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
netif_stop_queue(dev);
@@ -1110,7 +1109,7 @@
netif_start_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
static void print_eth(unsigned char *add, char *str)
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index 21153de..7c7518b 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -17,7 +17,7 @@
}
EXPORT_SYMBOL(ei_close);
-int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
return __ei_start_xmit(skb, dev);
}
diff --git a/drivers/net/8390.h b/drivers/net/8390.h
index 3c61d6d..3d9e8fb 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/8390.h
@@ -40,7 +40,7 @@
extern int ei_close(struct net_device *dev);
extern irqreturn_t ei_interrupt(int irq, void *dev_id);
extern void ei_tx_timeout(struct net_device *dev);
-extern int ei_start_xmit(struct sk_buff *skb, struct net_device *dev);
+extern netdev_tx_t ei_start_xmit(struct sk_buff *skb, struct net_device *dev);
extern void ei_set_multicast_list(struct net_device *dev);
extern struct net_device_stats *ei_get_stats(struct net_device *dev);
@@ -58,7 +58,7 @@
extern int eip_close(struct net_device *dev);
extern irqreturn_t eip_interrupt(int irq, void *dev_id);
extern void eip_tx_timeout(struct net_device *dev);
-extern int eip_start_xmit(struct sk_buff *skb, struct net_device *dev);
+extern netdev_tx_t eip_start_xmit(struct sk_buff *skb, struct net_device *dev);
extern void eip_set_multicast_list(struct net_device *dev);
extern struct net_device_stats *eip_get_stats(struct net_device *dev);
diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c
index d225c29..a2a64ea 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/8390p.c
@@ -22,7 +22,7 @@
}
EXPORT_SYMBOL(eip_close);
-int eip_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t eip_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
return __ei_start_xmit(skb, dev);
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5f6509a..507569a4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -209,7 +209,7 @@
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
@@ -1727,12 +1727,14 @@
tristate "Micrel KSZ8842"
depends on HAS_IOMEM
help
- This platform driver is for Micrel KSZ8842 chip.
+ This platform driver is for Micrel KSZ8842 / KS8842
+ 2-port ethernet switch chip (managed, VLAN, QoS).
config KS8851
tristate "Micrel KS8851 SPI"
depends on SPI
select MII
+ select CRC32
help
SPI driver for Micrel KS8851 SPI attached network chip.
@@ -1774,7 +1776,7 @@
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
+ depends on NET_ETHERNET && EXPERIMENTAL && AR7
select PHYLIB
help
TI AR7 CPMAC Ethernet support
@@ -1926,6 +1928,12 @@
To compile this driver as a module, choose M here. The module
will be called atl2.
+config XILINX_EMACLITE
+ tristate "Xilinx 10/100 Ethernet Lite support"
+ depends on PPC32 || MICROBLAZE
+ help
+ This driver supports the 10/100 Ethernet Lite from Xilinx.
+
source "drivers/net/fs_enet/Kconfig"
endif # NET_ETHERNET
@@ -2367,10 +2375,6 @@
This driver supports the Gigabit Ethernet mode of the QUICC Engine,
which is available on some Freescale SOCs.
-config UGETH_MAGIC_PACKET
- bool "Magic Packet detection support"
- depends on UCC_GETH
-
config UGETH_TX_ON_DEMAND
bool "Transmit on Demand support"
depends on UCC_GETH
@@ -2722,6 +2726,7 @@
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
+ select MDIO
help
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ead8cab..99ae6d7 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -142,6 +142,7 @@
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
+obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_QLGE) += qlge/
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 08787f5..b7ec036 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -547,17 +547,18 @@
netif_wake_queue(dev);
}
-static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lance_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
{
struct lance_private *lp = netdev_priv(dev);
volatile struct lance_regs *ll = lp->ll;
volatile struct lance_init_block *ib = lp->init_block;
int entry, skblen;
- int status = 0;
+ int status = NETDEV_TX_OK;
unsigned long flags;
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
skblen = max_t(unsigned, skb->len, ETH_ZLEN);
local_irq_save(flags);
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 08419ee..5f0b05c 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -2464,7 +2464,8 @@
}
-static int ace_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ace_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ace_private *ap = netdev_priv(dev);
struct ace_regs __iomem *regs = ap->regs;
diff --git a/drivers/net/acenic.h b/drivers/net/acenic.h
index c987c9b..17079b9 100644
--- a/drivers/net/acenic.h
+++ b/drivers/net/acenic.h
@@ -775,7 +775,8 @@
static irqreturn_t ace_interrupt(int irq, void *dev_id);
static int ace_load_firmware(struct net_device *dev);
static int ace_open(struct net_device *dev);
-static int ace_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ace_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int ace_close(struct net_device *dev);
static void ace_tasklet(unsigned long dev);
static void ace_dump_trace(struct ace_private *ap);
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 19831bd..4e6359f 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1300,7 +1300,8 @@
This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
*/
-static int amd8111e_start_xmit(struct sk_buff *skb, struct net_device * dev)
+static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
+ struct net_device * dev)
{
struct amd8111e_priv *lp = netdev_priv(dev);
int tx_index;
@@ -1346,7 +1347,7 @@
netif_stop_queue(dev);
}
spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/*
This function returns all the memory mapped registers of the device.
@@ -1523,9 +1524,6 @@
int err;
u32 mii_regval;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
switch(cmd) {
case SIOCGMIIPHY:
data->phy_id = lp->ext_phy_addr;
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 7f83254..b5dc7f5 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -192,7 +192,8 @@
static void cops_poll (unsigned long ltdev);
static void cops_timeout(struct net_device *dev);
static void cops_rx (struct net_device *dev);
-static int cops_send_packet (struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t cops_send_packet (struct sk_buff *skb,
+ struct net_device *dev);
static void set_multicast_list (struct net_device *dev);
static int cops_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
static int cops_close (struct net_device *dev);
@@ -875,7 +876,8 @@
* Make the card transmit a LocalTalk packet.
*/
-static int cops_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t cops_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct cops_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -920,7 +922,7 @@
dev->stats.tx_bytes += skb->len;
dev->trans_start = jiffies;
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 78cea5e..aaf14d3 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -48,7 +48,8 @@
#endif
/* Index to functions, as function prototypes. */
-static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ipddp_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int ipddp_create(struct ipddp_route *new_rt);
static int ipddp_delete(struct ipddp_route *rt);
static struct ipddp_route* __ipddp_find_route(struct ipddp_route *rt);
@@ -113,7 +114,7 @@
/*
* Transmit LLAP/ELAP frame using aarp_send_ddp.
*/
-static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ipddp_xmit(struct sk_buff *skb, struct net_device *dev)
{
__be32 paddr = skb_rtable(skb)->rt_gateway;
struct ddpehdr *ddp;
@@ -132,7 +133,7 @@
}
if(rt == NULL) {
spin_unlock(&ipddp_route_lock);
- return 0;
+ return NETDEV_TX_OK;
}
our_addr = atalk_find_dev_addr(rt->dev);
@@ -176,12 +177,11 @@
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
- if(aarp_send_ddp(rt->dev, skb, &rt->at, NULL) < 0)
- dev_kfree_skb(skb);
+ aarp_send_ddp(rt->dev, skb, &rt->at, NULL);
spin_unlock(&ipddp_route_lock);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index b642647..08760ba 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -697,7 +697,7 @@
static struct timer_list ltpc_timer;
-static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ltpc_xmit(struct sk_buff *skb, struct net_device *dev);
static int read_30 ( struct net_device *dev)
{
@@ -895,7 +895,7 @@
/* DDP to LLAP translation */
-static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ltpc_xmit(struct sk_buff *skb, struct net_device *dev)
{
/* in kernel 1.3.xx, on entry skb->data points to ddp header,
* and skb->len is the length of the ddp data + ddp header
@@ -932,7 +932,7 @@
dev->stats.tx_bytes += skb->len;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* initialization stuff */
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 7d227cda..75a5725 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -591,7 +591,8 @@
/* Called by the kernel in order to transmit a packet. */
-int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct arcnet_local *lp = netdev_priv(dev);
struct archdr *pkt;
diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c
index 58e8d52..c35af3e 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ariadne.c
@@ -115,7 +115,8 @@
static int ariadne_open(struct net_device *dev);
static void ariadne_init_ring(struct net_device *dev);
-static int ariadne_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ariadne_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static void ariadne_tx_timeout(struct net_device *dev);
static int ariadne_rx(struct net_device *dev);
static void ariadne_reset(struct net_device *dev);
@@ -589,7 +590,8 @@
}
-static int ariadne_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ariadne_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ariadne_private *priv = netdev_priv(dev);
volatile struct Am79C960 *lance = (struct Am79C960*)dev->base_addr;
@@ -610,7 +612,7 @@
if (skb->len < ETH_ZLEN)
{
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
len = ETH_ZLEN;
}
@@ -685,7 +687,7 @@
}
local_irq_restore(flags);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 627bc75..164b37e 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -482,7 +482,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 5041d10..c8bc60a7 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -834,7 +834,7 @@
we free and return(0) or don't free and return 1 */
}
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index fbf4645..2be49c8 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -762,7 +762,7 @@
return mii_link_ok(&ep->mii);
}
-static struct ethtool_ops ep93xx_ethtool_ops = {
+static const struct ethtool_ops ep93xx_ethtool_ops = {
.get_drvinfo = ep93xx_get_drvinfo,
.get_settings = ep93xx_get_settings,
.set_settings = ep93xx_set_settings,
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
index edf770f..e47c0d9 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/arm/ether1.c
@@ -748,7 +748,7 @@
netif_stop_queue(dev);
out:
- return 0;
+ return NETDEV_TX_OK;
}
static void
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 4550371..1f7a69c 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -511,7 +511,7 @@
dev_kfree_skb(skb);
priv(dev)->stats.tx_dropped ++;
netif_start_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
length = (length + 1) & ~1;
@@ -562,7 +562,7 @@
netif_stop_queue(dev);
out:
- return 0;
+ return NETDEV_TX_OK;
}
static irqreturn_t
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 3fe0987..691b81e 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -802,7 +802,7 @@
return phy_start_aneg(port->phydev);
}
-static struct ethtool_ops ixp4xx_ethtool_ops = {
+static const struct ethtool_ops ixp4xx_ethtool_ops = {
.get_drvinfo = ixp4xx_get_drvinfo,
.get_settings = ixp4xx_get_settings,
.set_settings = ixp4xx_set_settings,
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 35cd264..2a7b774 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -467,7 +467,6 @@
netif_rx(skb);
/* Record stats */
- ndev->last_rx = jiffies;
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += pktlen;
goto rx_finished;
@@ -1063,7 +1062,7 @@
sizeof(info->bus_info));
}
-static struct ethtool_ops ks8695_ethtool_ops = {
+static const struct ethtool_ops ks8695_ethtool_ops = {
.get_msglevel = ks8695_get_msglevel,
.set_msglevel = ks8695_set_msglevel,
.get_settings = ks8695_get_settings,
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
index 616fb79..25e2627 100644
--- a/drivers/net/arm/w90p910_ether.c
+++ b/drivers/net/arm/w90p910_ether.c
@@ -143,16 +143,17 @@
struct tran_pdesc {
struct w90p910_txbd desclist[TX_DESC_SIZE];
- char tran_buf[RX_DESC_SIZE][MAX_TBUFF_SZ];
+ char tran_buf[TX_DESC_SIZE][MAX_TBUFF_SZ];
};
struct w90p910_ether {
struct recv_pdesc *rdesc;
- struct recv_pdesc *rdesc_phys;
struct tran_pdesc *tdesc;
- struct tran_pdesc *tdesc_phys;
+ dma_addr_t rdesc_phys;
+ dma_addr_t tdesc_phys;
struct net_device_stats stats;
struct platform_device *pdev;
+ struct resource *res;
struct sk_buff *skb;
struct clk *clk;
struct clk *rmiiclk;
@@ -169,7 +170,6 @@
unsigned int start_tx_ptr;
unsigned int start_rx_ptr;
unsigned int linkflag;
- spinlock_t lock;
};
static void update_linkspeed_register(struct net_device *dev,
@@ -275,59 +275,75 @@
__raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE);
}
-static void w90p910_init_desc(struct net_device *dev)
+static int w90p910_init_desc(struct net_device *dev)
{
struct w90p910_ether *ether;
- struct w90p910_txbd *tdesc, *tdesc_phys;
- struct w90p910_rxbd *rdesc, *rdesc_phys;
- unsigned int i, j;
+ struct w90p910_txbd *tdesc;
+ struct w90p910_rxbd *rdesc;
+ struct platform_device *pdev;
+ unsigned int i;
ether = netdev_priv(dev);
+ pdev = ether->pdev;
ether->tdesc = (struct tran_pdesc *)
- dma_alloc_coherent(NULL, sizeof(struct tran_pdesc),
- (dma_addr_t *) ðer->tdesc_phys, GFP_KERNEL);
+ dma_alloc_coherent(&pdev->dev, sizeof(struct tran_pdesc),
+ ðer->tdesc_phys, GFP_KERNEL);
+
+ if (!ether->tdesc) {
+ dev_err(&pdev->dev, "Failed to allocate memory for tx desc\n");
+ return -ENOMEM;
+ }
ether->rdesc = (struct recv_pdesc *)
- dma_alloc_coherent(NULL, sizeof(struct recv_pdesc),
- (dma_addr_t *) ðer->rdesc_phys, GFP_KERNEL);
+ dma_alloc_coherent(&pdev->dev, sizeof(struct recv_pdesc),
+ ðer->rdesc_phys, GFP_KERNEL);
+
+ if (!ether->rdesc) {
+ dev_err(&pdev->dev, "Failed to allocate memory for rx desc\n");
+ dma_free_coherent(&pdev->dev, sizeof(struct tran_pdesc),
+ ether->tdesc, ether->tdesc_phys);
+ return -ENOMEM;
+ }
for (i = 0; i < TX_DESC_SIZE; i++) {
+ unsigned int offset;
+
tdesc = &(ether->tdesc->desclist[i]);
- j = ((i + 1) / TX_DESC_SIZE);
+ if (i == TX_DESC_SIZE - 1)
+ offset = offsetof(struct tran_pdesc, desclist[0]);
+ else
+ offset = offsetof(struct tran_pdesc, desclist[i + 1]);
- if (j != 0) {
- tdesc_phys = &(ether->tdesc_phys->desclist[0]);
- ether->start_tx_ptr = (unsigned int)tdesc_phys;
- tdesc->next = (unsigned int)ether->start_tx_ptr;
- } else {
- tdesc_phys = &(ether->tdesc_phys->desclist[i+1]);
- tdesc->next = (unsigned int)tdesc_phys;
- }
-
- tdesc->buffer = (unsigned int)ether->tdesc_phys->tran_buf[i];
+ tdesc->next = ether->tdesc_phys + offset;
+ tdesc->buffer = ether->tdesc_phys +
+ offsetof(struct tran_pdesc, tran_buf[i]);
tdesc->sl = 0;
tdesc->mode = 0;
}
+ ether->start_tx_ptr = ether->tdesc_phys;
+
for (i = 0; i < RX_DESC_SIZE; i++) {
+ unsigned int offset;
+
rdesc = &(ether->rdesc->desclist[i]);
- j = ((i + 1) / RX_DESC_SIZE);
+ if (i == RX_DESC_SIZE - 1)
+ offset = offsetof(struct recv_pdesc, desclist[0]);
+ else
+ offset = offsetof(struct recv_pdesc, desclist[i + 1]);
- if (j != 0) {
- rdesc_phys = &(ether->rdesc_phys->desclist[0]);
- ether->start_rx_ptr = (unsigned int)rdesc_phys;
- rdesc->next = (unsigned int)ether->start_rx_ptr;
- } else {
- rdesc_phys = &(ether->rdesc_phys->desclist[i+1]);
- rdesc->next = (unsigned int)rdesc_phys;
- }
-
+ rdesc->next = ether->rdesc_phys + offset;
rdesc->sl = RX_OWEN_DMA;
- rdesc->buffer = (unsigned int)ether->rdesc_phys->recv_buf[i];
+ rdesc->buffer = ether->rdesc_phys +
+ offsetof(struct recv_pdesc, recv_buf[i]);
}
+
+ ether->start_rx_ptr = ether->rdesc_phys;
+
+ return 0;
}
static void w90p910_set_fifo_threshold(struct net_device *dev)
@@ -456,8 +472,6 @@
{
struct w90p910_ether *ether = netdev_priv(dev);
- spin_lock(ðer->lock);
-
w90p910_enable_tx(dev, 0);
w90p910_enable_rx(dev, 0);
w90p910_set_fifo_threshold(dev);
@@ -486,8 +500,6 @@
if (netif_queue_stopped(dev))
netif_wake_queue(dev);
-
- spin_unlock(ðer->lock);
}
static void w90p910_mdio_write(struct net_device *dev,
@@ -541,7 +553,7 @@
return data;
}
-static int set_mac_address(struct net_device *dev, void *addr)
+static int w90p910_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *address = addr;
@@ -557,11 +569,14 @@
static int w90p910_ether_close(struct net_device *dev)
{
struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
- dma_free_writecombine(NULL, sizeof(struct w90p910_rxbd),
- ether->rdesc, (dma_addr_t)ether->rdesc_phys);
- dma_free_writecombine(NULL, sizeof(struct w90p910_txbd),
- ether->tdesc, (dma_addr_t)ether->tdesc_phys);
+ pdev = ether->pdev;
+
+ dma_free_coherent(&pdev->dev, sizeof(struct recv_pdesc),
+ ether->rdesc, ether->rdesc_phys);
+ dma_free_coherent(&pdev->dev, sizeof(struct tran_pdesc),
+ ether->tdesc, ether->tdesc_phys);
netif_stop_queue(dev);
@@ -597,6 +612,7 @@
txbd = ðer->tdesc->desclist[ether->cur_tx];
buffer = ether->tdesc->tran_buf[ether->cur_tx];
+
if (length > 1514) {
dev_err(&pdev->dev, "send data %d bytes, check it\n", length);
length = 1514;
@@ -612,7 +628,9 @@
w90p910_trigger_tx(dev);
- ether->cur_tx = (ether->cur_tx+1) % TX_DESC_SIZE;
+ if (++ether->cur_tx >= TX_DESC_SIZE)
+ ether->cur_tx = 0;
+
txbd = ðer->tdesc->desclist[ether->cur_tx];
dev->trans_start = jiffies;
@@ -632,7 +650,7 @@
dev_kfree_skb_irq(skb);
return 0;
}
- return -1;
+ return -EAGAIN;
}
static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id)
@@ -640,27 +658,25 @@
struct w90p910_ether *ether;
struct w90p910_txbd *txbd;
struct platform_device *pdev;
- struct tran_pdesc *tran_pdesc;
struct net_device *dev;
unsigned int cur_entry, entry, status;
- dev = (struct net_device *)dev_id;
+ dev = dev_id;
ether = netdev_priv(dev);
pdev = ether->pdev;
- spin_lock(ðer->lock);
-
w90p910_get_and_clear_int(dev, &status);
cur_entry = __raw_readl(ether->reg + REG_CTXDSA);
- tran_pdesc = ether->tdesc_phys;
- entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+ entry = ether->tdesc_phys +
+ offsetof(struct tran_pdesc, desclist[ether->finish_tx]);
while (entry != cur_entry) {
txbd = ðer->tdesc->desclist[ether->finish_tx];
- ether->finish_tx = (ether->finish_tx + 1) % TX_DESC_SIZE;
+ if (++ether->finish_tx >= TX_DESC_SIZE)
+ ether->finish_tx = 0;
if (txbd->sl & TXDS_TXCP) {
ether->stats.tx_packets++;
@@ -675,20 +691,19 @@
if (netif_queue_stopped(dev))
netif_wake_queue(dev);
- entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+ entry = ether->tdesc_phys +
+ offsetof(struct tran_pdesc, desclist[ether->finish_tx]);
}
if (status & MISTA_EXDEF) {
dev_err(&pdev->dev, "emc defer exceed interrupt\n");
} else if (status & MISTA_TXBERR) {
- dev_err(&pdev->dev, "emc bus error interrupt\n");
- w90p910_reset_mac(dev);
- } else if (status & MISTA_TDU) {
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
- }
-
- spin_unlock(ðer->lock);
+ dev_err(&pdev->dev, "emc bus error interrupt\n");
+ w90p910_reset_mac(dev);
+ } else if (status & MISTA_TDU) {
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
return IRQ_HANDLED;
}
@@ -698,20 +713,20 @@
struct w90p910_ether *ether;
struct w90p910_rxbd *rxbd;
struct platform_device *pdev;
- struct recv_pdesc *rdesc_phys;
struct sk_buff *skb;
unsigned char *data;
unsigned int length, status, val, entry;
ether = netdev_priv(dev);
pdev = ether->pdev;
- rdesc_phys = ether->rdesc_phys;
rxbd = ðer->rdesc->desclist[ether->cur_rx];
do {
val = __raw_readl(ether->reg + REG_CRXDSA);
- entry = (unsigned int)&rdesc_phys->desclist[ether->cur_rx];
+
+ entry = ether->rdesc_phys +
+ offsetof(struct recv_pdesc, desclist[ether->cur_rx]);
if (val == entry)
break;
@@ -743,25 +758,25 @@
dev_err(&pdev->dev, "rx runt err\n");
ether->stats.rx_length_errors++;
} else if (status & RXDS_CRCE) {
- dev_err(&pdev->dev, "rx crc err\n");
- ether->stats.rx_crc_errors++;
- }
-
- if (status & RXDS_ALIE) {
+ dev_err(&pdev->dev, "rx crc err\n");
+ ether->stats.rx_crc_errors++;
+ } else if (status & RXDS_ALIE) {
dev_err(&pdev->dev, "rx aligment err\n");
ether->stats.rx_frame_errors++;
} else if (status & RXDS_PTLE) {
- dev_err(&pdev->dev, "rx longer err\n");
- ether->stats.rx_over_errors++;
- }
+ dev_err(&pdev->dev, "rx longer err\n");
+ ether->stats.rx_over_errors++;
}
+ }
rxbd->sl = RX_OWEN_DMA;
rxbd->reserved = 0x0;
- ether->cur_rx = (ether->cur_rx+1) % RX_DESC_SIZE;
+
+ if (++ether->cur_rx >= RX_DESC_SIZE)
+ ether->cur_rx = 0;
+
rxbd = ðer->rdesc->desclist[ether->cur_rx];
- dev->last_rx = jiffies;
} while (1);
}
@@ -772,28 +787,23 @@
struct platform_device *pdev;
unsigned int status;
- dev = (struct net_device *)dev_id;
+ dev = dev_id;
ether = netdev_priv(dev);
pdev = ether->pdev;
- spin_lock(ðer->lock);
-
w90p910_get_and_clear_int(dev, &status);
if (status & MISTA_RDU) {
netdev_rx(dev);
-
w90p910_trigger_rx(dev);
- spin_unlock(ðer->lock);
return IRQ_HANDLED;
} else if (status & MISTA_RXBERR) {
- dev_err(&pdev->dev, "emc rx bus error\n");
- w90p910_reset_mac(dev);
- }
+ dev_err(&pdev->dev, "emc rx bus error\n");
+ w90p910_reset_mac(dev);
+ }
netdev_rx(dev);
- spin_unlock(ðer->lock);
return IRQ_HANDLED;
}
@@ -826,6 +836,7 @@
if (request_irq(ether->rxirq, w90p910_rx_interrupt,
0x0, pdev->name, dev)) {
dev_err(&pdev->dev, "register irq rx failed\n");
+ free_irq(ether->txirq, dev);
return -EAGAIN;
}
@@ -908,7 +919,7 @@
.ndo_start_xmit = w90p910_ether_start_xmit,
.ndo_get_stats = w90p910_ether_stats,
.ndo_set_multicast_list = w90p910_ether_set_multicast_list,
- .ndo_set_mac_address = set_mac_address,
+ .ndo_set_mac_address = w90p910_set_mac_address,
.ndo_do_ioctl = w90p910_ether_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
@@ -949,8 +960,6 @@
get_mac_address(dev);
- spin_lock_init(ðer->lock);
-
ether->cur_tx = 0x0;
ether->cur_rx = 0x0;
ether->finish_tx = 0x0;
@@ -972,30 +981,29 @@
{
struct w90p910_ether *ether;
struct net_device *dev;
- struct resource *res;
int error;
dev = alloc_etherdev(sizeof(struct w90p910_ether));
if (!dev)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
+ ether = netdev_priv(dev);
+
+ ether->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (ether->res == NULL) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
error = -ENXIO;
goto failed_free;
}
- res = request_mem_region(res->start, resource_size(res), pdev->name);
- if (res == NULL) {
+ if (!request_mem_region(ether->res->start,
+ resource_size(ether->res), pdev->name)) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
error = -EBUSY;
goto failed_free;
}
- ether = netdev_priv(dev);
-
- ether->reg = ioremap(res->start, resource_size(res));
+ ether->reg = ioremap(ether->res->start, resource_size(ether->res));
if (ether->reg == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
@@ -1056,7 +1064,7 @@
failed_free_io:
iounmap(ether->reg);
failed_free_mem:
- release_mem_region(res->start, resource_size(res));
+ release_mem_region(ether->res->start, resource_size(ether->res));
failed_free:
free_netdev(dev);
return error;
@@ -1068,10 +1076,19 @@
struct w90p910_ether *ether = netdev_priv(dev);
unregister_netdev(dev);
+
clk_put(ether->rmiiclk);
clk_put(ether->clk);
+
+ iounmap(ether->reg);
+ release_mem_region(ether->res->start, resource_size(ether->res));
+
+ free_irq(ether->txirq, dev);
+ free_irq(ether->rxirq, dev);
+
del_timer_sync(ðer->check_timer);
platform_set_drvdata(pdev, NULL);
+
free_netdev(dev);
return 0;
}
@@ -1080,7 +1097,7 @@
.probe = w90p910_ether_probe,
.remove = __devexit_p(w90p910_ether_remove),
.driver = {
- .name = "w90p910-emc",
+ .name = "nuc900-emc",
.owner = THIS_MODULE,
},
};
@@ -1101,5 +1118,5 @@
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 MAC driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-emc");
+MODULE_ALIAS("platform:nuc900-emc");
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index cf30e27..544d5af 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -159,7 +159,8 @@
static int at1700_probe1(struct net_device *dev, int ioaddr);
static int read_eeprom(long ioaddr, int location);
static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t net_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t net_interrupt(int irq, void *dev_id);
static void net_rx(struct net_device *dev);
static int net_close(struct net_device *dev);
@@ -595,7 +596,8 @@
}
-static int net_send_packet (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t net_send_packet (struct sk_buff *skb,
+ struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -643,7 +645,7 @@
netif_start_queue (dev);
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* The typical workload of the driver:
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index 5425ab0..0c0dece 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -796,7 +796,7 @@
if (len > skb->len) {
if (skb_padto(skb, len))
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue (dev);
@@ -846,7 +846,7 @@
lp->tx_full = 1;
spin_unlock_irqrestore (&lp->devlock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* The LANCE interrupt handler. */
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index 00d11b4..9b1e0ea 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -294,7 +294,7 @@
return 0;
}
-static struct ethtool_ops atl1c_ethtool_ops = {
+static const struct ethtool_ops atl1c_ethtool_ops = {
.get_settings = atl1c_get_settings,
.set_settings = atl1c_set_settings,
.get_drvinfo = atl1c_get_drvinfo,
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index a383122..be2c6cf 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -534,10 +534,6 @@
break;
case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN)) {
- retval = -EPERM;
- goto out;
- }
if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
&data->val_out)) {
retval = -EIO;
@@ -546,10 +542,6 @@
break;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN)) {
- retval = -EPERM;
- goto out;
- }
if (data->reg_num & ~(0x1F)) {
retval = -EFAULT;
goto out;
@@ -1740,7 +1732,6 @@
} else
netif_receive_skb(skb);
- netdev->last_rx = jiffies;
(*work_done)++;
count++;
}
@@ -2055,7 +2046,8 @@
AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data);
}
-static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
unsigned long flags;
@@ -2678,6 +2670,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
atl1c_down(adapter);
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 4003955..60edb9f 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -378,7 +378,7 @@
return 0;
}
-static struct ethtool_ops atl1e_ethtool_ops = {
+static const struct ethtool_ops atl1e_ethtool_ops = {
.get_settings = atl1e_get_settings,
.set_settings = atl1e_set_settings,
.get_drvinfo = atl1e_get_drvinfo,
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 9fc6d6d..69b830f 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -453,10 +453,6 @@
break;
case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN)) {
- retval = -EPERM;
- goto out;
- }
if (atl1e_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
&data->val_out)) {
retval = -EIO;
@@ -465,10 +461,6 @@
break;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN)) {
- retval = -EPERM;
- goto out;
- }
if (data->reg_num & ~(0x1F)) {
retval = -EFAULT;
goto out;
@@ -1839,7 +1831,8 @@
AT_WRITE_REG(&adapter->hw, REG_MB_TPD_PROD_IDX, tx_ring->next_to_use);
}
-static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t atl1e_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct atl1e_adapter *adapter = netdev_priv(netdev);
unsigned long flags;
@@ -2497,6 +2490,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
atl1e_down(adapter);
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 8bca12f..00569dc 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2349,7 +2349,8 @@
atomic_set(&tpd_ring->next_to_use, next_to_use);
}
-static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t atl1_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index 204db96..ab68886 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -821,7 +821,8 @@
(int) (txd_read_ptr - adapter->txd_write_ptr - 1);
}
-static int atl2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t atl2_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct atl2_adapter *adapter = netdev_priv(netdev);
struct tx_pkt_header *txph;
@@ -965,8 +966,6 @@
data->phy_id = 0;
break;
case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
spin_lock_irqsave(&adapter->stats_lock, flags);
if (atl2_read_phy_reg(&adapter->hw,
data->reg_num & 0x1F, &data->val_out)) {
@@ -976,8 +975,6 @@
spin_unlock_irqrestore(&adapter->stats_lock, flags);
break;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
if (data->reg_num & ~(0x1F))
return -EFAULT;
spin_lock_irqsave(&adapter->stats_lock, flags);
@@ -2093,7 +2090,7 @@
return 0;
}
-static struct ethtool_ops atl2_ethtool_ops = {
+static const struct ethtool_ops atl2_ethtool_ops = {
.get_settings = atl2_get_settings,
.set_settings = atl2_set_settings,
.get_drvinfo = atl2_get_drvinfo,
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 4317b3e..9043294 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -199,7 +199,8 @@
static void hardware_init(struct net_device *dev);
static void write_packet(long ioaddr, int length, unsigned char *packet, int pad, int mode);
static void trigger_send(long ioaddr, int length);
-static int atp_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t atp_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t atp_interrupt(int irq, void *dev_id);
static void net_rx(struct net_device *dev);
static void read_block(long ioaddr, int length, unsigned char *buffer, int data_mode);
@@ -552,7 +553,8 @@
dev->stats.tx_errors++;
}
-static int atp_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t atp_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
long ioaddr = dev->base_addr;
@@ -587,7 +589,7 @@
dev->trans_start = jiffies;
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index d3c734f..fdf5937 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -937,7 +937,7 @@
/*
* Au1000 transmit routine.
*/
-static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
{
struct au1000_private *aup = netdev_priv(dev);
struct net_device_stats *ps = &dev->stats;
@@ -988,7 +988,7 @@
dev_kfree_skb(skb);
aup->tx_head = (aup->tx_head + 1) & (NUM_TX_DMA - 1);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -1157,6 +1157,9 @@
aup->mii_bus->name = "au1000_eth_mii";
snprintf(aup->mii_bus->id, MII_BUS_ID_SIZE, "%x", aup->mac_id);
aup->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ if (aup->mii_bus->irq == NULL)
+ goto err_out;
+
for(i = 0; i < PHY_MAX_ADDR; ++i)
aup->mii_bus->irq[i] = PHY_POLL;
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index bafca67..0189dcd 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -946,7 +946,7 @@
netif_wake_queue(dev);
}
-static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct b44 *bp = netdev_priv(dev);
int rc = NETDEV_TX_OK;
@@ -1298,14 +1298,18 @@
switch (sdev->bus->bustype) {
case SSB_BUSTYPE_SSB:
bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
- (((ssb_clockspeed(sdev->bus) + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
+ (DIV_ROUND_CLOSEST(ssb_clockspeed(sdev->bus),
+ B44_MDC_RATIO)
& MDIO_CTRL_MAXF_MASK)));
break;
case SSB_BUSTYPE_PCI:
- case SSB_BUSTYPE_PCMCIA:
bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
(0x0d & MDIO_CTRL_MAXF_MASK)));
break;
+ case SSB_BUSTYPE_PCMCIA:
+ case SSB_BUSTYPE_SDIO:
+ WARN_ON(1); /* A device with this bus does not exist. */
+ break;
}
br32(bp, B44_MDIO_CTRL);
@@ -1757,15 +1761,18 @@
struct b44 *bp = netdev_priv(dev);
struct ssb_bus *bus = bp->sdev->bus;
- strncpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver));
- strncpy(info->version, DRV_MODULE_VERSION, sizeof(info->driver));
+ strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version));
switch (bus->bustype) {
case SSB_BUSTYPE_PCI:
- strncpy(info->bus_info, pci_name(bus->host_pci), sizeof(info->bus_info));
+ strlcpy(info->bus_info, pci_name(bus->host_pci), sizeof(info->bus_info));
+ break;
+ case SSB_BUSTYPE_SSB:
+ strlcpy(info->bus_info, "SSB", sizeof(info->bus_info));
break;
case SSB_BUSTYPE_PCMCIA:
- case SSB_BUSTYPE_SSB:
- strncpy(info->bus_info, "SSB", sizeof(info->bus_info));
+ case SSB_BUSTYPE_SDIO:
+ WARN_ON(1); /* A device with this bus does not exist. */
break;
}
}
diff --git a/drivers/net/benet/Kconfig b/drivers/net/benet/Kconfig
index c6934f1..fdb6e81 100644
--- a/drivers/net/benet/Kconfig
+++ b/drivers/net/benet/Kconfig
@@ -1,7 +1,6 @@
config BE2NET
tristate "ServerEngines' 10Gbps NIC - BladeEngine 2"
depends on PCI && INET
- select INET_LRO
help
This driver implements the NIC functionality for ServerEngines'
10Gbps network adapter - BladeEngine 2.
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 5b4bf3d..13b72ce 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -28,11 +28,11 @@
#include <linux/if_vlan.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
-#include <linux/inet_lro.h>
+#include <linux/firmware.h>
#include "be_hw.h"
-#define DRV_VER "2.0.348"
+#define DRV_VER "2.101.205"
#define DRV_NAME "be2net"
#define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC"
#define OC_NAME "Emulex OneConnect 10Gbps NIC"
@@ -72,8 +72,7 @@
#define MAX_RX_POST BE_NAPI_WEIGHT /* Frags posted at a time */
#define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST)
-#define BE_MAX_LRO_DESCRIPTORS 16
-#define BE_MAX_FRAGS_PER_FRAME (min((u32) 16, (u32) MAX_SKB_FRAGS))
+#define FW_VER_LEN 32
struct be_dma_mem {
void *va;
@@ -127,7 +126,6 @@
index_inc(&q->tail, q->len);
}
-
struct be_eq_obj {
struct be_queue_info q;
char desc[32];
@@ -146,31 +144,6 @@
struct be_queue_info cq;
};
-struct be_ctrl_info {
- u8 __iomem *csr;
- u8 __iomem *db; /* Door Bell */
- u8 __iomem *pcicfg; /* PCI config space */
- int pci_func;
-
- /* Mbox used for cmd request/response */
- spinlock_t mbox_lock; /* For serializing mbox cmds to BE card */
- struct be_dma_mem mbox_mem;
- /* Mbox mem is adjusted to align to 16 bytes. The allocated addr
- * is stored for freeing purpose */
- struct be_dma_mem mbox_mem_alloced;
-
- /* MCC Rings */
- struct be_mcc_obj mcc_obj;
- spinlock_t mcc_lock; /* For serializing mcc cmds to BE card */
- spinlock_t mcc_cq_lock;
-
- /* MCC Async callback */
- void (*async_cb)(void *adapter, bool link_up);
- void *adapter_ctxt;
-};
-
-#include "be_cmds.h"
-
struct be_drvr_stats {
u32 be_tx_reqs; /* number of TX requests initiated */
u32 be_tx_stops; /* number of times TX Q was stopped */
@@ -189,8 +162,6 @@
u32 be_polls; /* number of times NAPI called poll function */
u32 be_rx_events; /* number of ucast rx completion events */
u32 be_rx_compl; /* number of rx completion entries processed */
- u32 be_lro_hgram_data[8]; /* histogram of LRO data packets */
- u32 be_lro_hgram_ack[8]; /* histogram of LRO ACKs */
ulong be_rx_jiffies;
u64 be_rx_bytes;
u64 be_rx_bytes_prev;
@@ -233,8 +204,6 @@
struct be_queue_info q;
struct be_queue_info cq;
struct be_rx_page_info page_info_tbl[RX_Q_LEN];
- struct net_lro_mgr lro_mgr;
- struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
};
#define BE_NUM_MSIX_VECTORS 2 /* 1 each for Tx and Rx */
@@ -242,8 +211,19 @@
struct pci_dev *pdev;
struct net_device *netdev;
- /* Mbox, pci config, csr address information */
- struct be_ctrl_info ctrl;
+ u8 __iomem *csr;
+ u8 __iomem *db; /* Door Bell */
+ u8 __iomem *pcicfg; /* PCI config space */
+
+ spinlock_t mbox_lock; /* For serializing mbox cmds to BE card */
+ struct be_dma_mem mbox_mem;
+ /* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+ * is stored for freeing purpose */
+ struct be_dma_mem mbox_mem_alloced;
+
+ struct be_mcc_obj mcc_obj;
+ spinlock_t mcc_lock; /* For serializing mcc cmds to BE card */
+ spinlock_t mcc_cq_lock;
struct msix_entry msix_entries[BE_NUM_MSIX_VECTORS];
bool msix_enabled;
@@ -271,7 +251,6 @@
/* Ethtool knobs and info */
bool rx_csum; /* BE card must perform rx-checksumming */
- u32 max_rx_coal;
char fw_ver[FW_VER_LEN];
u32 if_handle; /* Used to configure filtering */
u32 pmac_id; /* MAC addr handle used by BE card */
@@ -281,10 +260,15 @@
bool promiscuous;
};
-extern struct ethtool_ops be_ethtool_ops;
+extern const struct ethtool_ops be_ethtool_ops;
#define drvr_stats(adapter) (&adapter->stats.drvr_stats)
+static inline unsigned int be_pci_func(struct be_adapter *adapter)
+{
+ return PCI_FUNC(adapter->pdev->devfn);
+}
+
#define BE_SET_NETDEV_OPS(netdev, ops) (netdev->netdev_ops = ops)
#define PAGE_SHIFT_4K 12
@@ -375,6 +359,8 @@
return val;
}
-extern void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
u16 num_popped);
+extern void be_link_status_update(struct be_adapter *adapter, bool link_up);
+extern int be_load_fw(struct be_adapter *adapter, u8 *func);
#endif /* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 583517ed..1db0924 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -16,21 +16,22 @@
*/
#include "be.h"
+#include "be_cmds.h"
-static void be_mcc_notify(struct be_ctrl_info *ctrl)
+static void be_mcc_notify(struct be_adapter *adapter)
{
- struct be_queue_info *mccq = &ctrl->mcc_obj.q;
+ struct be_queue_info *mccq = &adapter->mcc_obj.q;
u32 val = 0;
val |= mccq->id & DB_MCCQ_RING_ID_MASK;
val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT;
- iowrite32(val, ctrl->db + DB_MCCQ_OFFSET);
+ iowrite32(val, adapter->db + DB_MCCQ_OFFSET);
}
/* To check if valid bit is set, check the entire word as we don't know
* the endianness of the data (old entry is host endian while a new entry is
* little endian) */
-static inline bool be_mcc_compl_is_new(struct be_mcc_cq_entry *compl)
+static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
{
if (compl->flags != 0) {
compl->flags = le32_to_cpu(compl->flags);
@@ -42,13 +43,13 @@
}
/* Need to reset the entire word that houses the valid bit */
-static inline void be_mcc_compl_use(struct be_mcc_cq_entry *compl)
+static inline void be_mcc_compl_use(struct be_mcc_compl *compl)
{
compl->flags = 0;
}
-static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
- struct be_mcc_cq_entry *compl)
+static int be_mcc_compl_process(struct be_adapter *adapter,
+ struct be_mcc_compl *compl)
{
u16 compl_status, extd_status;
@@ -61,8 +62,8 @@
if (compl_status != MCC_STATUS_SUCCESS) {
extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
CQE_STATUS_EXTD_MASK;
- printk(KERN_WARNING DRV_NAME
- " error in cmd completion: status(compl/extd)=%d/%d\n",
+ dev_warn(&adapter->pdev->dev,
+ "Error in cmd completion: status(compl/extd)=%d/%d\n",
compl_status, extd_status);
return -1;
}
@@ -70,11 +71,11 @@
}
/* Link state evt is a string of bytes; no need for endian swapping */
-static void be_async_link_state_process(struct be_ctrl_info *ctrl,
+static void be_async_link_state_process(struct be_adapter *adapter,
struct be_async_event_link_state *evt)
{
- ctrl->async_cb(ctrl->adapter_ctxt,
- evt->port_link_status == ASYNC_EVENT_LINK_UP ? true : false);
+ be_link_status_update(adapter,
+ evt->port_link_status == ASYNC_EVENT_LINK_UP);
}
static inline bool is_link_state_evt(u32 trailer)
@@ -84,10 +85,10 @@
ASYNC_EVENT_CODE_LINK_STATE);
}
-static struct be_mcc_cq_entry *be_mcc_compl_get(struct be_ctrl_info *ctrl)
+static struct be_mcc_compl *be_mcc_compl_get(struct be_adapter *adapter)
{
- struct be_queue_info *mcc_cq = &ctrl->mcc_obj.cq;
- struct be_mcc_cq_entry *compl = queue_tail_node(mcc_cq);
+ struct be_queue_info *mcc_cq = &adapter->mcc_obj.cq;
+ struct be_mcc_compl *compl = queue_tail_node(mcc_cq);
if (be_mcc_compl_is_new(compl)) {
queue_tail_inc(mcc_cq);
@@ -96,55 +97,55 @@
return NULL;
}
-void be_process_mcc(struct be_ctrl_info *ctrl)
+void be_process_mcc(struct be_adapter *adapter)
{
- struct be_mcc_cq_entry *compl;
+ struct be_mcc_compl *compl;
int num = 0;
- spin_lock_bh(&ctrl->mcc_cq_lock);
- while ((compl = be_mcc_compl_get(ctrl))) {
+ spin_lock_bh(&adapter->mcc_cq_lock);
+ while ((compl = be_mcc_compl_get(adapter))) {
if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
/* Interpret flags as an async trailer */
BUG_ON(!is_link_state_evt(compl->flags));
/* Interpret compl as a async link evt */
- be_async_link_state_process(ctrl,
+ be_async_link_state_process(adapter,
(struct be_async_event_link_state *) compl);
} else {
- be_mcc_compl_process(ctrl, compl);
- atomic_dec(&ctrl->mcc_obj.q.used);
+ be_mcc_compl_process(adapter, compl);
+ atomic_dec(&adapter->mcc_obj.q.used);
}
be_mcc_compl_use(compl);
num++;
}
if (num)
- be_cq_notify(ctrl, ctrl->mcc_obj.cq.id, true, num);
- spin_unlock_bh(&ctrl->mcc_cq_lock);
+ be_cq_notify(adapter, adapter->mcc_obj.cq.id, true, num);
+ spin_unlock_bh(&adapter->mcc_cq_lock);
}
/* Wait till no more pending mcc requests are present */
-static void be_mcc_wait_compl(struct be_ctrl_info *ctrl)
+static void be_mcc_wait_compl(struct be_adapter *adapter)
{
#define mcc_timeout 50000 /* 5s timeout */
int i;
for (i = 0; i < mcc_timeout; i++) {
- be_process_mcc(ctrl);
- if (atomic_read(&ctrl->mcc_obj.q.used) == 0)
+ be_process_mcc(adapter);
+ if (atomic_read(&adapter->mcc_obj.q.used) == 0)
break;
udelay(100);
}
if (i == mcc_timeout)
- printk(KERN_WARNING DRV_NAME "mcc poll timed out\n");
+ dev_err(&adapter->pdev->dev, "mccq poll timed out\n");
}
/* Notify MCC requests and wait for completion */
-static void be_mcc_notify_wait(struct be_ctrl_info *ctrl)
+static void be_mcc_notify_wait(struct be_adapter *adapter)
{
- be_mcc_notify(ctrl);
- be_mcc_wait_compl(ctrl);
+ be_mcc_notify(adapter);
+ be_mcc_wait_compl(adapter);
}
-static int be_mbox_db_ready_wait(void __iomem *db)
+static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
{
int cnt = 0, wait = 5;
u32 ready;
@@ -154,9 +155,8 @@
if (ready)
break;
- if (cnt > 200000) {
- printk(KERN_WARNING DRV_NAME
- ": mbox_db poll timed out\n");
+ if (cnt > 4000000) {
+ dev_err(&adapter->pdev->dev, "mbox poll timed out\n");
return -1;
}
@@ -173,55 +173,52 @@
* Insert the mailbox address into the doorbell in two steps
* Polls on the mbox doorbell till a command completion (or a timeout) occurs
*/
-static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
+static int be_mbox_notify(struct be_adapter *adapter)
{
int status;
u32 val = 0;
- void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
- struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
+ void __iomem *db = adapter->db + MPU_MAILBOX_DB_OFFSET;
+ struct be_dma_mem *mbox_mem = &adapter->mbox_mem;
struct be_mcc_mailbox *mbox = mbox_mem->va;
- struct be_mcc_cq_entry *cqe = &mbox->cqe;
+ struct be_mcc_compl *compl = &mbox->compl;
- memset(cqe, 0, sizeof(*cqe));
+ memset(compl, 0, sizeof(*compl));
- val &= ~MPU_MAILBOX_DB_RDY_MASK;
val |= MPU_MAILBOX_DB_HI_MASK;
/* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
iowrite32(val, db);
/* wait for ready to be set */
- status = be_mbox_db_ready_wait(db);
+ status = be_mbox_db_ready_wait(adapter, db);
if (status != 0)
return status;
val = 0;
- val &= ~MPU_MAILBOX_DB_RDY_MASK;
- val &= ~MPU_MAILBOX_DB_HI_MASK;
/* at bits 2 - 31 place mbox dma addr lsb bits 4 - 33 */
val |= (u32)(mbox_mem->dma >> 4) << 2;
iowrite32(val, db);
- status = be_mbox_db_ready_wait(db);
+ status = be_mbox_db_ready_wait(adapter, db);
if (status != 0)
return status;
/* A cq entry has been made now */
- if (be_mcc_compl_is_new(cqe)) {
- status = be_mcc_compl_process(ctrl, &mbox->cqe);
- be_mcc_compl_use(cqe);
+ if (be_mcc_compl_is_new(compl)) {
+ status = be_mcc_compl_process(adapter, &mbox->compl);
+ be_mcc_compl_use(compl);
if (status)
return status;
} else {
- printk(KERN_WARNING DRV_NAME "invalid mailbox completion\n");
+ dev_err(&adapter->pdev->dev, "invalid mailbox completion\n");
return -1;
}
return 0;
}
-static int be_POST_stage_get(struct be_ctrl_info *ctrl, u16 *stage)
+static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
{
- u32 sem = ioread32(ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+ u32 sem = ioread32(adapter->csr + MPU_EP_SEMAPHORE_OFFSET);
*stage = sem & EP_SEMAPHORE_POST_STAGE_MASK;
if ((sem >> EP_SEMAPHORE_POST_ERR_SHIFT) & EP_SEMAPHORE_POST_ERR_MASK)
@@ -230,54 +227,17 @@
return 0;
}
-static int be_POST_stage_poll(struct be_ctrl_info *ctrl, u16 poll_stage)
-{
- u16 stage, cnt, error;
- for (cnt = 0; cnt < 5000; cnt++) {
- error = be_POST_stage_get(ctrl, &stage);
- if (error)
- return -1;
-
- if (stage == poll_stage)
- break;
- udelay(1000);
- }
- if (stage != poll_stage)
- return -1;
- return 0;
-}
-
-
-int be_cmd_POST(struct be_ctrl_info *ctrl)
+int be_cmd_POST(struct be_adapter *adapter)
{
u16 stage, error;
- error = be_POST_stage_get(ctrl, &stage);
- if (error)
- goto err;
-
- if (stage == POST_STAGE_ARMFW_RDY)
- return 0;
-
- if (stage != POST_STAGE_AWAITING_HOST_RDY)
- goto err;
-
- /* On awaiting host rdy, reset and again poll on awaiting host rdy */
- iowrite32(POST_STAGE_BE_RESET, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
- error = be_POST_stage_poll(ctrl, POST_STAGE_AWAITING_HOST_RDY);
- if (error)
- goto err;
-
- /* Now kickoff POST and poll on armfw ready */
- iowrite32(POST_STAGE_HOST_RDY, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
- error = be_POST_stage_poll(ctrl, POST_STAGE_ARMFW_RDY);
- if (error)
- goto err;
+ error = be_POST_stage_get(adapter, &stage);
+ if (error || stage != POST_STAGE_ARMFW_RDY) {
+ dev_err(&adapter->pdev->dev, "POST failed.\n");
+ return -1;
+ }
return 0;
-err:
- printk(KERN_WARNING DRV_NAME ": ERROR, stage=%d\n", stage);
- return -1;
}
static inline void *embedded_payload(struct be_mcc_wrb *wrb)
@@ -367,16 +327,16 @@
return wrb;
}
-int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+int be_cmd_eq_create(struct be_adapter *adapter,
struct be_queue_info *eq, int eq_delay)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_eq_create *req = embedded_payload(wrb);
struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
struct be_dma_mem *q_mem = &eq->dma_mem;
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -387,7 +347,7 @@
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
AMAP_SET_BITS(struct amap_eq_context, func, req->context,
- ctrl->pci_func);
+ be_pci_func(adapter));
AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
/* 4byte eqe*/
AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
@@ -399,24 +359,24 @@
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
eq->id = le16_to_cpu(resp->eq_id);
eq->created = true;
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
u8 type, bool permanent, u32 if_handle)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_mac_query *req = embedded_payload(wrb);
struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -432,22 +392,22 @@
req->permanent = 0;
}
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status)
memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
u32 if_id, u32 *pmac_id)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -458,23 +418,23 @@
req->if_id = cpu_to_le32(if_id);
memcpy(req->mac_address, mac_addr, ETH_ALEN);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_pmac_add *resp = embedded_payload(wrb);
*pmac_id = le32_to_cpu(resp->pmac_id);
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id)
+int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -485,24 +445,24 @@
req->if_id = cpu_to_le32(if_id);
req->pmac_id = cpu_to_le32(pmac_id);
- status = be_mbox_db_ring(ctrl);
- spin_unlock(&ctrl->mbox_lock);
+ status = be_mbox_notify(adapter);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+int be_cmd_cq_create(struct be_adapter *adapter,
struct be_queue_info *cq, struct be_queue_info *eq,
bool sol_evts, bool no_delay, int coalesce_wm)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_cq_create *req = embedded_payload(wrb);
struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
struct be_dma_mem *q_mem = &cq->dma_mem;
void *ctxt = &req->context;
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -521,17 +481,17 @@
AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
- AMAP_SET_BITS(struct amap_cq_context, func, ctxt, ctrl->pci_func);
+ AMAP_SET_BITS(struct amap_cq_context, func, ctxt, be_pci_func(adapter));
be_dws_cpu_to_le(ctxt, sizeof(req->context));
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
cq->id = le16_to_cpu(resp->cq_id);
cq->created = true;
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
@@ -544,17 +504,17 @@
return len_encoded;
}
-int be_cmd_mccq_create(struct be_ctrl_info *ctrl,
+int be_cmd_mccq_create(struct be_adapter *adapter,
struct be_queue_info *mccq,
struct be_queue_info *cq)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_mcc_create *req = embedded_payload(wrb);
struct be_dma_mem *q_mem = &mccq->dma_mem;
void *ctxt = &req->context;
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -564,7 +524,7 @@
req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
- AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, ctrl->pci_func);
+ AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, be_pci_func(adapter));
AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
be_encoded_q_len(mccq->len));
@@ -574,29 +534,29 @@
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
mccq->id = le16_to_cpu(resp->id);
mccq->created = true;
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+int be_cmd_txq_create(struct be_adapter *adapter,
struct be_queue_info *txq,
struct be_queue_info *cq)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_eth_tx_create *req = embedded_payload(wrb);
struct be_dma_mem *q_mem = &txq->dma_mem;
void *ctxt = &req->context;
int status;
u32 len_encoded;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -613,7 +573,7 @@
len_encoded = 0;
AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt, len_encoded);
AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
- ctrl->pci_func);
+ be_pci_func(adapter));
AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
@@ -621,27 +581,27 @@
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_eth_tx_create *resp = embedded_payload(wrb);
txq->id = le16_to_cpu(resp->cid);
txq->created = true;
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+int be_cmd_rxq_create(struct be_adapter *adapter,
struct be_queue_info *rxq, u16 cq_id, u16 frag_size,
u16 max_frame_size, u32 if_id, u32 rss)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_eth_rx_create *req = embedded_payload(wrb);
struct be_dma_mem *q_mem = &rxq->dma_mem;
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -657,27 +617,27 @@
req->max_frame_size = cpu_to_le16(max_frame_size);
req->rss_queue = cpu_to_le32(rss);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_eth_rx_create *resp = embedded_payload(wrb);
rxq->id = le16_to_cpu(resp->id);
rxq->created = true;
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
/* Generic destroyer function for all types of queues */
-int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
int queue_type)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
u8 subsys = 0, opcode = 0;
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -704,29 +664,27 @@
opcode = OPCODE_COMMON_MCC_DESTROY;
break;
default:
- printk(KERN_WARNING DRV_NAME ":bad Q type in Q destroy cmd\n");
- status = -1;
- goto err;
+ BUG();
}
be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
req->id = cpu_to_le16(q->id);
- status = be_mbox_db_ring(ctrl);
-err:
- spin_unlock(&ctrl->mbox_lock);
+ status = be_mbox_notify(adapter);
+
+ spin_unlock(&adapter->mbox_lock);
return status;
}
/* Create an rx filtering policy configuration on an i/f */
-int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 flags, u8 *mac,
+int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_if_create *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -739,7 +697,7 @@
if (!pmac_invalid)
memcpy(req->mac_addr, mac, ETH_ALEN);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_if_create *resp = embedded_payload(wrb);
*if_handle = le32_to_cpu(resp->interface_id);
@@ -747,17 +705,17 @@
*pmac_id = le32_to_cpu(resp->pmac_id);
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 interface_id)
+int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -766,9 +724,9 @@
OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
req->interface_id = cpu_to_le32(interface_id);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
@@ -776,14 +734,14 @@
/* Get stats is a non embedded command: the request is not embedded inside
* WRB but is a separate dma memory block
*/
-int be_cmd_get_stats(struct be_ctrl_info *ctrl, struct be_dma_mem *nonemb_cmd)
+int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_get_stats *req = nonemb_cmd->va;
struct be_sge *sge = nonembedded_sgl(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
memset(req, 0, sizeof(*req));
@@ -796,24 +754,24 @@
sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
sge->len = cpu_to_le32(nonemb_cmd->size);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_get_stats *resp = nonemb_cmd->va;
be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+int be_cmd_link_status_query(struct be_adapter *adapter,
bool *link_up)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_link_status *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
*link_up = false;
memset(wrb, 0, sizeof(*wrb));
@@ -823,24 +781,24 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
if (resp->mac_speed != PHY_LINK_SPEED_ZERO)
*link_up = true;
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver)
+int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -848,24 +806,24 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
/* set the EQ delay interval of an EQ to specified value */
-int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd)
+int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -878,20 +836,20 @@
req->delay[0].phase = 0;
req->delay[0].delay_multiplier = cpu_to_le32(eqd);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
+int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
u32 num, bool untagged, bool promiscuous)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -908,21 +866,21 @@
req->num_vlan * sizeof(vtag_array[0]));
}
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
/* Use MCC for this command as it may be called in BH context */
-int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
+int be_cmd_promiscuous_config(struct be_adapter *adapter, u8 port_num, bool en)
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_promiscuous_config *req;
- spin_lock_bh(&ctrl->mcc_lock);
+ spin_lock_bh(&adapter->mcc_lock);
- wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+ wrb = wrb_from_mcc(&adapter->mcc_obj.q);
BUG_ON(!wrb);
req = embedded_payload(wrb);
@@ -937,9 +895,9 @@
else
req->port0_promiscuous = en;
- be_mcc_notify_wait(ctrl);
+ be_mcc_notify_wait(adapter);
- spin_unlock_bh(&ctrl->mcc_lock);
+ spin_unlock_bh(&adapter->mcc_lock);
return 0;
}
@@ -947,16 +905,16 @@
* Use MCC for this command as it may be called in BH context
* (mc == NULL) => multicast promiscous
*/
-int be_cmd_multicast_set(struct be_ctrl_info *ctrl, u32 if_id,
+int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
struct dev_mc_list *mc_list, u32 mc_count)
{
#define BE_MAX_MC 32 /* set mcast promisc if > 32 */
struct be_mcc_wrb *wrb;
struct be_cmd_req_mcast_mac_config *req;
- spin_lock_bh(&ctrl->mcc_lock);
+ spin_lock_bh(&adapter->mcc_lock);
- wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+ wrb = wrb_from_mcc(&adapter->mcc_obj.q);
BUG_ON(!wrb);
req = embedded_payload(wrb);
@@ -979,20 +937,20 @@
req->promiscuous = 1;
}
- be_mcc_notify_wait(ctrl);
+ be_mcc_notify_wait(adapter);
- spin_unlock_bh(&ctrl->mcc_lock);
+ spin_unlock_bh(&adapter->mcc_lock);
return 0;
}
-int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
+int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -1004,19 +962,19 @@
req->tx_flow_control = cpu_to_le16((u16)tx_fc);
req->rx_flow_control = cpu_to_le16((u16)rx_fc);
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_get_flow_control(struct be_ctrl_info *ctrl, u32 *tx_fc, u32 *rx_fc)
+int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -1025,7 +983,7 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_get_flow_control *resp =
embedded_payload(wrb);
@@ -1033,17 +991,17 @@
*rx_fc = le16_to_cpu(resp->rx_flow_control);
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
return status;
}
-int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num)
+int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->mbox_lock);
+ spin_lock(&adapter->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -1052,12 +1010,61 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
- status = be_mbox_db_ring(ctrl);
+ status = be_mbox_notify(adapter);
if (!status) {
struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
*port_num = le32_to_cpu(resp->phys_port);
}
- spin_unlock(&ctrl->mbox_lock);
+ spin_unlock(&adapter->mbox_lock);
+ return status;
+}
+
+int be_cmd_reset_function(struct be_adapter *adapter)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
+ struct be_cmd_req_hdr *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&adapter->mbox_lock);
+
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(req, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
+
+ status = be_mbox_notify(adapter);
+
+ spin_unlock(&adapter->mbox_lock);
+ return status;
+}
+
+int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
+ u32 flash_type, u32 flash_opcode, u32 buf_size)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&adapter->mbox_mem);
+ struct be_cmd_write_flashrom *req = cmd->va;
+ struct be_sge *sge = nonembedded_sgl(wrb);
+ int status;
+
+ spin_lock(&adapter->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, cmd->size, false, 1);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_WRITE_FLASHROM, cmd->size);
+ sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));
+ sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(cmd->size);
+
+ req->params.op_type = cpu_to_le32(flash_type);
+ req->params.op_code = cpu_to_le32(flash_opcode);
+ req->params.data_buf_size = cpu_to_le32(buf_size);
+
+ status = be_mbox_notify(adapter);
+
+ spin_unlock(&adapter->mbox_lock);
return status;
}
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 747626d..fd7028e 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -69,7 +69,7 @@
#define CQE_STATUS_EXTD_MASK 0xFFFF
#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */
-struct be_mcc_cq_entry {
+struct be_mcc_compl {
u32 status; /* dword 0 */
u32 tag0; /* dword 1 */
u32 tag1; /* dword 2 */
@@ -106,7 +106,7 @@
struct be_mcc_mailbox {
struct be_mcc_wrb wrb;
- struct be_mcc_cq_entry cqe;
+ struct be_mcc_compl compl;
};
#define CMD_SUBSYSTEM_COMMON 0x1
@@ -117,6 +117,7 @@
#define OPCODE_COMMON_NTWK_MULTICAST_SET 3
#define OPCODE_COMMON_NTWK_VLAN_CONFIG 4
#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY 5
+#define OPCODE_COMMON_WRITE_FLASHROM 7
#define OPCODE_COMMON_CQ_CREATE 12
#define OPCODE_COMMON_EQ_CREATE 13
#define OPCODE_COMMON_MCC_CREATE 21
@@ -135,6 +136,7 @@
#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG 58
#define OPCODE_COMMON_NTWK_PMAC_ADD 59
#define OPCODE_COMMON_NTWK_PMAC_DEL 60
+#define OPCODE_COMMON_FUNCTION_RESET 61
#define OPCODE_ETH_ACPI_CONFIG 2
#define OPCODE_ETH_PROMISCUOUS 3
@@ -634,7 +636,6 @@
} __packed;
/******************** Get FW Version *******************/
-#define FW_VER_LEN 32
struct be_cmd_req_get_fw_version {
struct be_cmd_req_hdr hdr;
u8 rsvd0[FW_VER_LEN];
@@ -693,56 +694,74 @@
u32 be_config_number;
u32 asic_revision;
u32 phys_port;
- u32 function_mode;
+ u32 function_cap;
u32 rsvd[26];
};
-extern int be_pci_fnum_get(struct be_ctrl_info *ctrl);
-extern int be_cmd_POST(struct be_ctrl_info *ctrl);
-extern int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+/****************** Firmware Flash ******************/
+struct flashrom_params {
+ u32 op_code;
+ u32 op_type;
+ u32 data_buf_size;
+ u32 offset;
+ u8 data_buf[4];
+};
+
+struct be_cmd_write_flashrom {
+ struct be_cmd_req_hdr hdr;
+ struct flashrom_params params;
+};
+
+extern int be_pci_fnum_get(struct be_adapter *adapter);
+extern int be_cmd_POST(struct be_adapter *adapter);
+extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
u8 type, bool permanent, u32 if_handle);
-extern int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
u32 if_id, u32 *pmac_id);
-extern int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id);
-extern int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 if_flags, u8 *mac,
+extern int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id);
+extern int be_cmd_if_create(struct be_adapter *adapter, u32 if_flags, u8 *mac,
bool pmac_invalid, u32 *if_handle, u32 *pmac_id);
-extern int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 if_handle);
-extern int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+extern int be_cmd_if_destroy(struct be_adapter *adapter, u32 if_handle);
+extern int be_cmd_eq_create(struct be_adapter *adapter,
struct be_queue_info *eq, int eq_delay);
-extern int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+extern int be_cmd_cq_create(struct be_adapter *adapter,
struct be_queue_info *cq, struct be_queue_info *eq,
bool sol_evts, bool no_delay,
int num_cqe_dma_coalesce);
-extern int be_cmd_mccq_create(struct be_ctrl_info *ctrl,
+extern int be_cmd_mccq_create(struct be_adapter *adapter,
struct be_queue_info *mccq,
struct be_queue_info *cq);
-extern int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+extern int be_cmd_txq_create(struct be_adapter *adapter,
struct be_queue_info *txq,
struct be_queue_info *cq);
-extern int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+extern int be_cmd_rxq_create(struct be_adapter *adapter,
struct be_queue_info *rxq, u16 cq_id,
u16 frag_size, u16 max_frame_size, u32 if_id,
u32 rss);
-extern int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+extern int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
int type);
-extern int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+extern int be_cmd_link_status_query(struct be_adapter *adapter,
bool *link_up);
-extern int be_cmd_reset(struct be_ctrl_info *ctrl);
-extern int be_cmd_get_stats(struct be_ctrl_info *ctrl,
+extern int be_cmd_reset(struct be_adapter *adapter);
+extern int be_cmd_get_stats(struct be_adapter *adapter,
struct be_dma_mem *nonemb_cmd);
-extern int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver);
+extern int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver);
-extern int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd);
-extern int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id,
+extern int be_cmd_modify_eqd(struct be_adapter *adapter, u32 eq_id, u32 eqd);
+extern int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id,
u16 *vtag_array, u32 num, bool untagged,
bool promiscuous);
-extern int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl,
+extern int be_cmd_promiscuous_config(struct be_adapter *adapter,
u8 port_num, bool en);
-extern int be_cmd_multicast_set(struct be_ctrl_info *ctrl, u32 if_id,
+extern int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
struct dev_mc_list *mc_list, u32 mc_count);
-extern int be_cmd_set_flow_control(struct be_ctrl_info *ctrl,
+extern int be_cmd_set_flow_control(struct be_adapter *adapter,
u32 tx_fc, u32 rx_fc);
-extern int be_cmd_get_flow_control(struct be_ctrl_info *ctrl,
+extern int be_cmd_get_flow_control(struct be_adapter *adapter,
u32 *tx_fc, u32 *rx_fc);
-extern int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num);
-extern void be_process_mcc(struct be_ctrl_info *ctrl);
+extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num);
+extern int be_cmd_reset_function(struct be_adapter *adapter);
+extern void be_process_mcc(struct be_adapter *adapter);
+extern int be_cmd_write_flashrom(struct be_adapter *adapter,
+ struct be_dma_mem *cmd, u32 flash_oper,
+ u32 flash_opcode, u32 buf_size);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index cccc541..11445df 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -16,6 +16,7 @@
*/
#include "be.h"
+#include "be_cmds.h"
#include <linux/ethtool.h>
struct be_ethtool_stat {
@@ -127,8 +128,6 @@
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
- coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
-
coalesce->rx_coalesce_usecs = rx_eq->cur_eqd;
coalesce->rx_coalesce_usecs_high = rx_eq->max_eqd;
coalesce->rx_coalesce_usecs_low = rx_eq->min_eqd;
@@ -144,14 +143,12 @@
}
/*
- * This routine is used to set interrup coalescing delay *as well as*
- * the number of pkts to coalesce for LRO.
+ * This routine is used to set interrup coalescing delay
*/
static int
be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
{
struct be_adapter *adapter = netdev_priv(netdev);
- struct be_ctrl_info *ctrl = &adapter->ctrl;
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
u32 tx_max, tx_min, tx_cur;
@@ -161,10 +158,6 @@
if (coalesce->use_adaptive_tx_coalesce == 1)
return -EINVAL;
- adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
- if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME)
- adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
-
/* if AIC is being turned on now, start with an EQD of 0 */
if (rx_eq->enable_aic == 0 &&
coalesce->use_adaptive_rx_coalesce == 1) {
@@ -183,7 +176,7 @@
if (tx_cur > BE_MAX_EQD)
tx_cur = BE_MAX_EQD;
if (tx_eq->cur_eqd != tx_cur) {
- status = be_cmd_modify_eqd(ctrl, tx_eq->q.id, tx_cur);
+ status = be_cmd_modify_eqd(adapter, tx_eq->q.id, tx_cur);
if (!status)
tx_eq->cur_eqd = tx_cur;
}
@@ -203,7 +196,8 @@
if (rx_cur > BE_MAX_EQD)
rx_cur = BE_MAX_EQD;
if (rx_eq->cur_eqd != rx_cur) {
- status = be_cmd_modify_eqd(ctrl, rx_eq->q.id, rx_cur);
+ status = be_cmd_modify_eqd(adapter, rx_eq->q.id,
+ rx_cur);
if (!status)
rx_eq->cur_eqd = rx_cur;
}
@@ -317,8 +311,7 @@
{
struct be_adapter *adapter = netdev_priv(netdev);
- be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause,
- &ecmd->rx_pause);
+ be_cmd_get_flow_control(adapter, &ecmd->tx_pause, &ecmd->rx_pause);
ecmd->autoneg = 0;
}
@@ -331,7 +324,7 @@
if (ecmd->autoneg != 0)
return -EINVAL;
- status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause,
+ status = be_cmd_set_flow_control(adapter, ecmd->tx_pause,
ecmd->rx_pause);
if (!status)
dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
@@ -339,7 +332,21 @@
return status;
}
-struct ethtool_ops be_ethtool_ops = {
+static int
+be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ char file_name[ETHTOOL_FLASH_MAX_FILENAME];
+ u32 region;
+
+ file_name[ETHTOOL_FLASH_MAX_FILENAME - 1] = 0;
+ strcpy(file_name, efl->data);
+ region = efl->region;
+
+ return be_load_fw(adapter, file_name);
+}
+
+const struct ethtool_ops be_ethtool_ops = {
.get_settings = be_get_settings,
.get_drvinfo = be_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -359,4 +366,5 @@
.get_strings = be_get_stat_strings,
.get_stats_count = be_get_stats_count,
.get_ethtool_stats = be_get_ethtool_stats,
+ .flash_device = be_do_flash,
};
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 29c33c7..a3394b4 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -51,9 +51,6 @@
* with the OS.
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
-/* PCI physical function number */
-#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK 0x7 /* bits 26 - 28 */
-#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT 26
/********* ISR0 Register offset **********/
#define CEV_ISR0_OFFSET 0xC18
@@ -207,7 +204,7 @@
u8 numfrags[3]; /* dword 1 */
u8 rss_flush; /* dword 2 */
u8 cast_enc[2]; /* dword 2 */
- u8 qnq; /* dword 2 */
+ u8 vtm; /* dword 2 */
u8 rss_bank; /* dword 2 */
u8 rsvd1[23]; /* dword 2 */
u8 lro_pkt; /* dword 2 */
@@ -219,3 +216,86 @@
struct be_eth_rx_compl {
u32 dw[4];
};
+
+/* Flashrom related descriptors */
+#define IMAGE_TYPE_FIRMWARE 160
+#define IMAGE_TYPE_BOOTCODE 224
+#define IMAGE_TYPE_OPTIONROM 32
+
+#define NUM_FLASHDIR_ENTRIES 32
+
+#define FLASHROM_TYPE_ISCSI_ACTIVE 0
+#define FLASHROM_TYPE_BIOS 2
+#define FLASHROM_TYPE_PXE_BIOS 3
+#define FLASHROM_TYPE_FCOE_BIOS 8
+#define FLASHROM_TYPE_ISCSI_BACKUP 9
+#define FLASHROM_TYPE_FCOE_FW_ACTIVE 10
+#define FLASHROM_TYPE_FCOE_FW_BACKUP 11
+
+#define FLASHROM_OPER_FLASH 1
+#define FLASHROM_OPER_SAVE 2
+
+#define FLASH_IMAGE_MAX_SIZE (1310720) /* Max firmware image size */
+#define FLASH_BIOS_IMAGE_MAX_SIZE (262144) /* Max OPTION ROM image sz */
+
+/* Offsets for components on Flash. */
+#define FLASH_iSCSI_PRIMARY_IMAGE_START (1048576)
+#define FLASH_iSCSI_BACKUP_IMAGE_START (2359296)
+#define FLASH_FCoE_PRIMARY_IMAGE_START (3670016)
+#define FLASH_FCoE_BACKUP_IMAGE_START (4980736)
+#define FLASH_iSCSI_BIOS_START (7340032)
+#define FLASH_PXE_BIOS_START (7864320)
+#define FLASH_FCoE_BIOS_START (524288)
+
+struct controller_id {
+ u32 vendor;
+ u32 device;
+ u32 subvendor;
+ u32 subdevice;
+};
+
+struct flash_file_hdr {
+ u8 sign[32];
+ u32 cksum;
+ u32 antidote;
+ struct controller_id cont_id;
+ u32 file_len;
+ u32 chunk_num;
+ u32 total_chunks;
+ u32 num_imgs;
+ u8 build[24];
+};
+
+struct flash_section_hdr {
+ u32 format_rev;
+ u32 cksum;
+ u32 antidote;
+ u32 build_no;
+ u8 id_string[64];
+ u32 active_entry_mask;
+ u32 valid_entry_mask;
+ u32 org_content_mask;
+ u32 rsvd0;
+ u32 rsvd1;
+ u32 rsvd2;
+ u32 rsvd3;
+ u32 rsvd4;
+};
+
+struct flash_section_entry {
+ u32 type;
+ u32 offset;
+ u32 pad_size;
+ u32 image_size;
+ u32 cksum;
+ u32 entry_point;
+ u32 rsvd0;
+ u32 rsvd1;
+ u8 ver_data[32];
+};
+
+struct flash_section_info {
+ u8 cookie[32];
+ struct flash_section_hdr fsec_hdr;
+ struct flash_section_entry fsec_entry[32];
+};
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index dea3155..ce11bba 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -16,6 +16,7 @@
*/
#include "be.h"
+#include "be_cmds.h"
#include <asm/div64.h>
MODULE_VERSION(DRV_VER);
@@ -60,40 +61,39 @@
return 0;
}
-static void be_intr_set(struct be_ctrl_info *ctrl, bool enable)
+static void be_intr_set(struct be_adapter *adapter, bool enable)
{
- u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
+ u8 __iomem *addr = adapter->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
u32 reg = ioread32(addr);
u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
- if (!enabled && enable) {
+
+ if (!enabled && enable)
reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
- } else if (enabled && !enable) {
+ else if (enabled && !enable)
reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
- } else {
- printk(KERN_WARNING DRV_NAME
- ": bad value in membar_int_ctrl reg=0x%x\n", reg);
+ else
return;
- }
+
iowrite32(reg, addr);
}
-static void be_rxq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted)
{
u32 val = 0;
val |= qid & DB_RQ_RING_ID_MASK;
val |= posted << DB_RQ_NUM_POSTED_SHIFT;
- iowrite32(val, ctrl->db + DB_RQ_OFFSET);
+ iowrite32(val, adapter->db + DB_RQ_OFFSET);
}
-static void be_txq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+static void be_txq_notify(struct be_adapter *adapter, u16 qid, u16 posted)
{
u32 val = 0;
val |= qid & DB_TXULP_RING_ID_MASK;
val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT;
- iowrite32(val, ctrl->db + DB_TXULP1_OFFSET);
+ iowrite32(val, adapter->db + DB_TXULP1_OFFSET);
}
-static void be_eq_notify(struct be_ctrl_info *ctrl, u16 qid,
+static void be_eq_notify(struct be_adapter *adapter, u16 qid,
bool arm, bool clear_int, u16 num_popped)
{
u32 val = 0;
@@ -104,37 +104,31 @@
val |= 1 << DB_EQ_CLR_SHIFT;
val |= 1 << DB_EQ_EVNT_SHIFT;
val |= num_popped << DB_EQ_NUM_POPPED_SHIFT;
- iowrite32(val, ctrl->db + DB_EQ_OFFSET);
+ iowrite32(val, adapter->db + DB_EQ_OFFSET);
}
-void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
- bool arm, u16 num_popped)
+void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped)
{
u32 val = 0;
val |= qid & DB_CQ_RING_ID_MASK;
if (arm)
val |= 1 << DB_CQ_REARM_SHIFT;
val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
- iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+ iowrite32(val, adapter->db + DB_CQ_OFFSET);
}
-
static int be_mac_addr_set(struct net_device *netdev, void *p)
{
struct be_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
int status = 0;
- if (netif_running(netdev)) {
- status = be_cmd_pmac_del(&adapter->ctrl, adapter->if_handle,
- adapter->pmac_id);
- if (status)
- return status;
+ status = be_cmd_pmac_del(adapter, adapter->if_handle, adapter->pmac_id);
+ if (status)
+ return status;
- status = be_cmd_pmac_add(&adapter->ctrl, (u8 *)addr->sa_data,
- adapter->if_handle, &adapter->pmac_id);
- }
-
+ status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data,
+ adapter->if_handle, &adapter->pmac_id);
if (!status)
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
@@ -214,9 +208,8 @@
dev_stats->tx_window_errors = 0;
}
-void be_link_status_update(void *ctxt, bool link_up)
+void be_link_status_update(struct be_adapter *adapter, bool link_up)
{
- struct be_adapter *adapter = ctxt;
struct net_device *netdev = adapter->netdev;
/* If link came up or went down */
@@ -237,7 +230,6 @@
/* Update the EQ delay n BE based on the RX frags consumed / sec */
static void be_rx_eqd_update(struct be_adapter *adapter)
{
- struct be_ctrl_info *ctrl = &adapter->ctrl;
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
ulong now = jiffies;
@@ -270,7 +262,7 @@
if (eqd < 10)
eqd = 0;
if (eqd != rx_eq->cur_eqd)
- be_cmd_modify_eqd(ctrl, rx_eq->q.id, eqd);
+ be_cmd_modify_eqd(adapter, rx_eq->q.id, eqd);
rx_eq->cur_eqd = eqd;
}
@@ -393,15 +385,19 @@
struct be_eth_wrb *wrb;
struct be_eth_hdr_wrb *hdr;
- atomic_add(wrb_cnt, &txq->used);
hdr = queue_head_node(txq);
+ atomic_add(wrb_cnt, &txq->used);
queue_head_inc(txq);
+ if (skb_dma_map(&pdev->dev, skb, DMA_TO_DEVICE)) {
+ dev_err(&pdev->dev, "TX DMA mapping failed\n");
+ return 0;
+ }
+
if (skb->len > skb->data_len) {
int len = skb->len - skb->data_len;
- busaddr = pci_map_single(pdev, skb->data, len,
- PCI_DMA_TODEVICE);
wrb = queue_head_node(txq);
+ busaddr = skb_shinfo(skb)->dma_head;
wrb_fill(wrb, busaddr, len);
be_dws_cpu_to_le(wrb, sizeof(*wrb));
queue_head_inc(txq);
@@ -411,9 +407,8 @@
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
struct skb_frag_struct *frag =
&skb_shinfo(skb)->frags[i];
- busaddr = pci_map_page(pdev, frag->page,
- frag->page_offset,
- frag->size, PCI_DMA_TODEVICE);
+
+ busaddr = skb_shinfo(skb)->dma_maps[i];
wrb = queue_head_node(txq);
wrb_fill(wrb, busaddr, frag->size);
be_dws_cpu_to_le(wrb, sizeof(*wrb));
@@ -435,7 +430,9 @@
return copied;
}
-static int be_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t be_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+
{
struct be_adapter *adapter = netdev_priv(netdev);
struct be_tx_obj *tx_obj = &adapter->tx_obj;
@@ -447,23 +444,28 @@
wrb_cnt = wrb_cnt_for_skb(skb, &dummy_wrb);
copied = make_tx_wrbs(adapter, skb, wrb_cnt, dummy_wrb);
+ if (copied) {
+ /* record the sent skb in the sent_skb table */
+ BUG_ON(tx_obj->sent_skb_list[start]);
+ tx_obj->sent_skb_list[start] = skb;
- /* record the sent skb in the sent_skb table */
- BUG_ON(tx_obj->sent_skb_list[start]);
- tx_obj->sent_skb_list[start] = skb;
+ /* Ensure txq has space for the next skb; Else stop the queue
+ * *BEFORE* ringing the tx doorbell, so that we serialze the
+ * tx compls of the current transmit which'll wake up the queue
+ */
+ if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >=
+ txq->len) {
+ netif_stop_queue(netdev);
+ stopped = true;
+ }
- /* Ensure that txq has space for the next skb; Else stop the queue
- * *BEFORE* ringing the tx doorbell, so that we serialze the
- * tx compls of the current transmit which'll wake up the queue
- */
- if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >= txq->len) {
- netif_stop_queue(netdev);
- stopped = true;
+ be_txq_notify(adapter, txq->id, wrb_cnt);
+
+ be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
+ } else {
+ txq->head = start;
+ dev_kfree_skb_any(skb);
}
-
- be_txq_notify(&adapter->ctrl, txq->id, wrb_cnt);
-
- be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
return NETDEV_TX_OK;
}
@@ -502,10 +504,10 @@
ntags++;
}
}
- be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+ be_cmd_vlan_config(adapter, adapter->if_handle,
vtag, ntags, 1, 0);
} else {
- be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+ be_cmd_vlan_config(adapter, adapter->if_handle,
NULL, 0, 1, 1);
}
}
@@ -515,13 +517,12 @@
struct be_adapter *adapter = netdev_priv(netdev);
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
- struct be_ctrl_info *ctrl = &adapter->ctrl;
- be_eq_notify(ctrl, rx_eq->q.id, false, false, 0);
- be_eq_notify(ctrl, tx_eq->q.id, false, false, 0);
+ be_eq_notify(adapter, rx_eq->q.id, false, false, 0);
+ be_eq_notify(adapter, tx_eq->q.id, false, false, 0);
adapter->vlan_grp = grp;
- be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
- be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+ be_eq_notify(adapter, rx_eq->q.id, true, false, 0);
+ be_eq_notify(adapter, tx_eq->q.id, true, false, 0);
}
static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
@@ -548,10 +549,9 @@
static void be_set_multicast_list(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
- struct be_ctrl_info *ctrl = &adapter->ctrl;
if (netdev->flags & IFF_PROMISC) {
- be_cmd_promiscuous_config(ctrl, adapter->port_num, 1);
+ be_cmd_promiscuous_config(adapter, adapter->port_num, 1);
adapter->promiscuous = true;
goto done;
}
@@ -559,15 +559,15 @@
/* BE was previously in promiscous mode; disable it */
if (adapter->promiscuous) {
adapter->promiscuous = false;
- be_cmd_promiscuous_config(ctrl, adapter->port_num, 0);
+ be_cmd_promiscuous_config(adapter, adapter->port_num, 0);
}
if (netdev->flags & IFF_ALLMULTI) {
- be_cmd_multicast_set(ctrl, adapter->if_handle, NULL, 0);
+ be_cmd_multicast_set(adapter, adapter->if_handle, NULL, 0);
goto done;
}
- be_cmd_multicast_set(ctrl, adapter->if_handle, netdev->mc_list,
+ be_cmd_multicast_set(adapter, adapter->if_handle, netdev->mc_list,
netdev->mc_count);
done:
return;
@@ -742,7 +742,7 @@
return;
}
-/* Process the RX completion indicated by rxcp when LRO is disabled */
+/* Process the RX completion indicated by rxcp when GRO is disabled */
static void be_rx_compl_process(struct be_adapter *adapter,
struct be_eth_rx_compl *rxcp)
{
@@ -784,18 +784,17 @@
netif_receive_skb(skb);
}
- adapter->netdev->last_rx = jiffies;
-
return;
}
-/* Process the RX completion indicated by rxcp when LRO is enabled */
-static void be_rx_compl_process_lro(struct be_adapter *adapter,
+/* Process the RX completion indicated by rxcp when GRO is enabled */
+static void be_rx_compl_process_gro(struct be_adapter *adapter,
struct be_eth_rx_compl *rxcp)
{
struct be_rx_page_info *page_info;
- struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
+ struct sk_buff *skb = NULL;
struct be_queue_info *rxq = &adapter->rx_obj.q;
+ struct be_eq_obj *eq_obj = &adapter->rx_eq;
u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
u16 i, rxq_idx = 0, vid, j;
@@ -804,6 +803,12 @@
vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+ skb = napi_get_frags(&eq_obj->napi);
+ if (!skb) {
+ be_rx_compl_discard(adapter, rxcp);
+ return;
+ }
+
remaining = pkt_size;
for (i = 0, j = -1; i < num_rcvd; i++) {
page_info = get_rx_page_info(adapter, rxq_idx);
@@ -814,13 +819,14 @@
if (i == 0 || page_info->page_offset == 0) {
/* First frag or Fresh page */
j++;
- rx_frags[j].page = page_info->page;
- rx_frags[j].page_offset = page_info->page_offset;
- rx_frags[j].size = 0;
+ skb_shinfo(skb)->frags[j].page = page_info->page;
+ skb_shinfo(skb)->frags[j].page_offset =
+ page_info->page_offset;
+ skb_shinfo(skb)->frags[j].size = 0;
} else {
put_page(page_info->page);
}
- rx_frags[j].size += curr_frag_len;
+ skb_shinfo(skb)->frags[j].size += curr_frag_len;
remaining -= curr_frag_len;
index_inc(&rxq_idx, rxq->len);
@@ -828,9 +834,14 @@
}
BUG_ON(j > MAX_SKB_FRAGS);
+ skb_shinfo(skb)->nr_frags = j + 1;
+ skb->len = pkt_size;
+ skb->data_len = pkt_size;
+ skb->truesize += pkt_size;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
if (likely(!vlanf)) {
- lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
- pkt_size, NULL, 0);
+ napi_gro_frags(&eq_obj->napi);
} else {
vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
vid = be16_to_cpu(vid);
@@ -838,9 +849,7 @@
if (!adapter->vlan_grp || adapter->num_vlans == 0)
return;
- lro_vlan_hwaccel_receive_frags(&adapter->rx_obj.lro_mgr,
- rx_frags, pkt_size, pkt_size, adapter->vlan_grp,
- vid, NULL, 0);
+ vlan_gro_frags(&eq_obj->napi, adapter->vlan_grp, vid);
}
be_rx_stats_update(adapter, pkt_size, num_rcvd);
@@ -931,7 +940,7 @@
if (posted) {
atomic_add(posted, &rxq->used);
- be_rxq_notify(&adapter->ctrl, rxq->id, posted);
+ be_rxq_notify(adapter, rxq->id, posted);
} else if (atomic_read(&rxq->used) == 0) {
/* Let be_worker replenish when memory is available */
adapter->rx_post_starved = true;
@@ -958,10 +967,8 @@
static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
{
struct be_queue_info *txq = &adapter->tx_obj.q;
- struct be_eth_wrb *wrb;
struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
struct sk_buff *sent_skb;
- u64 busaddr;
u16 cur_index, num_wrbs = 0;
cur_index = txq->tail;
@@ -971,22 +978,65 @@
do {
cur_index = txq->tail;
- wrb = queue_tail_node(txq);
- be_dws_le_to_cpu(wrb, sizeof(*wrb));
- busaddr = ((u64)wrb->frag_pa_hi << 32) | (u64)wrb->frag_pa_lo;
- if (busaddr != 0) {
- pci_unmap_single(adapter->pdev, busaddr,
- wrb->frag_len, PCI_DMA_TODEVICE);
- }
num_wrbs++;
queue_tail_inc(txq);
} while (cur_index != last_index);
atomic_sub(num_wrbs, &txq->used);
-
+ skb_dma_unmap(&adapter->pdev->dev, sent_skb, DMA_TO_DEVICE);
kfree_skb(sent_skb);
}
+static inline struct be_eq_entry *event_get(struct be_eq_obj *eq_obj)
+{
+ struct be_eq_entry *eqe = queue_tail_node(&eq_obj->q);
+
+ if (!eqe->evt)
+ return NULL;
+
+ eqe->evt = le32_to_cpu(eqe->evt);
+ queue_tail_inc(&eq_obj->q);
+ return eqe;
+}
+
+static int event_handle(struct be_adapter *adapter,
+ struct be_eq_obj *eq_obj)
+{
+ struct be_eq_entry *eqe;
+ u16 num = 0;
+
+ while ((eqe = event_get(eq_obj)) != NULL) {
+ eqe->evt = 0;
+ num++;
+ }
+
+ /* Deal with any spurious interrupts that come
+ * without events
+ */
+ be_eq_notify(adapter, eq_obj->q.id, true, true, num);
+ if (num)
+ napi_schedule(&eq_obj->napi);
+
+ return num;
+}
+
+/* Just read and notify events without processing them.
+ * Used at the time of destroying event queues */
+static void be_eq_clean(struct be_adapter *adapter,
+ struct be_eq_obj *eq_obj)
+{
+ struct be_eq_entry *eqe;
+ u16 num = 0;
+
+ while ((eqe = event_get(eq_obj)) != NULL) {
+ eqe->evt = 0;
+ num++;
+ }
+
+ if (num)
+ be_eq_notify(adapter, eq_obj->q.id, false, true, num);
+}
+
static void be_rx_q_clean(struct be_adapter *adapter)
{
struct be_rx_page_info *page_info;
@@ -999,12 +1049,12 @@
while ((rxcp = be_rx_compl_get(adapter)) != NULL) {
be_rx_compl_discard(adapter, rxcp);
be_rx_compl_reset(rxcp);
- be_cq_notify(&adapter->ctrl, rx_cq->id, true, 1);
+ be_cq_notify(adapter, rx_cq->id, true, 1);
}
/* Then free posted rx buffer that were not used */
tail = (rxq->head + rxq->len - atomic_read(&rxq->used)) % rxq->len;
- for (; tail != rxq->head; index_inc(&tail, rxq->len)) {
+ for (; atomic_read(&rxq->used) > 0; index_inc(&tail, rxq->len)) {
page_info = get_rx_page_info(adapter, tail);
put_page(page_info->page);
memset(page_info, 0, sizeof(*page_info));
@@ -1012,36 +1062,49 @@
BUG_ON(atomic_read(&rxq->used));
}
-static void be_tx_q_clean(struct be_adapter *adapter)
+static void be_tx_compl_clean(struct be_adapter *adapter)
{
- struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
- struct sk_buff *sent_skb;
+ struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
struct be_queue_info *txq = &adapter->tx_obj.q;
- u16 last_index;
- bool dummy_wrb;
+ struct be_eth_tx_compl *txcp;
+ u16 end_idx, cmpl = 0, timeo = 0;
- while (atomic_read(&txq->used)) {
- sent_skb = sent_skbs[txq->tail];
- last_index = txq->tail;
- index_adv(&last_index,
- wrb_cnt_for_skb(sent_skb, &dummy_wrb) - 1, txq->len);
- be_tx_compl_process(adapter, last_index);
- }
+ /* Wait for a max of 200ms for all the tx-completions to arrive. */
+ do {
+ while ((txcp = be_tx_compl_get(tx_cq))) {
+ end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
+ wrb_index, txcp);
+ be_tx_compl_process(adapter, end_idx);
+ cmpl++;
+ }
+ if (cmpl) {
+ be_cq_notify(adapter, tx_cq->id, false, cmpl);
+ cmpl = 0;
+ }
+
+ if (atomic_read(&txq->used) == 0 || ++timeo > 200)
+ break;
+
+ mdelay(1);
+ } while (true);
+
+ if (atomic_read(&txq->used))
+ dev_err(&adapter->pdev->dev, "%d pending tx-completions\n",
+ atomic_read(&txq->used));
}
static void be_mcc_queues_destroy(struct be_adapter *adapter)
{
struct be_queue_info *q;
- struct be_ctrl_info *ctrl = &adapter->ctrl;
- q = &ctrl->mcc_obj.q;
+ q = &adapter->mcc_obj.q;
if (q->created)
- be_cmd_q_destroy(ctrl, q, QTYPE_MCCQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_MCCQ);
be_queue_free(adapter, q);
- q = &ctrl->mcc_obj.cq;
+ q = &adapter->mcc_obj.cq;
if (q->created)
- be_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_CQ);
be_queue_free(adapter, q);
}
@@ -1049,25 +1112,24 @@
static int be_mcc_queues_create(struct be_adapter *adapter)
{
struct be_queue_info *q, *cq;
- struct be_ctrl_info *ctrl = &adapter->ctrl;
/* Alloc MCC compl queue */
- cq = &ctrl->mcc_obj.cq;
+ cq = &adapter->mcc_obj.cq;
if (be_queue_alloc(adapter, cq, MCC_CQ_LEN,
- sizeof(struct be_mcc_cq_entry)))
+ sizeof(struct be_mcc_compl)))
goto err;
/* Ask BE to create MCC compl queue; share TX's eq */
- if (be_cmd_cq_create(ctrl, cq, &adapter->tx_eq.q, false, true, 0))
+ if (be_cmd_cq_create(adapter, cq, &adapter->tx_eq.q, false, true, 0))
goto mcc_cq_free;
/* Alloc MCC queue */
- q = &ctrl->mcc_obj.q;
+ q = &adapter->mcc_obj.q;
if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb)))
goto mcc_cq_destroy;
/* Ask BE to create MCC queue */
- if (be_cmd_mccq_create(ctrl, q, cq))
+ if (be_cmd_mccq_create(adapter, q, cq))
goto mcc_q_free;
return 0;
@@ -1075,7 +1137,7 @@
mcc_q_free:
be_queue_free(adapter, q);
mcc_cq_destroy:
- be_cmd_q_destroy(ctrl, cq, QTYPE_CQ);
+ be_cmd_q_destroy(adapter, cq, QTYPE_CQ);
mcc_cq_free:
be_queue_free(adapter, cq);
err:
@@ -1087,23 +1149,21 @@
struct be_queue_info *q;
q = &adapter->tx_obj.q;
- if (q->created) {
- be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_TXQ);
-
- /* No more tx completions can be rcvd now; clean up if there
- * are any pending completions or pending tx requests */
- be_tx_q_clean(adapter);
- }
+ if (q->created)
+ be_cmd_q_destroy(adapter, q, QTYPE_TXQ);
be_queue_free(adapter, q);
q = &adapter->tx_obj.cq;
if (q->created)
- be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_CQ);
be_queue_free(adapter, q);
+ /* Clear any residual events */
+ be_eq_clean(adapter, &adapter->tx_eq);
+
q = &adapter->tx_eq.q;
if (q->created)
- be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_EQ);
be_queue_free(adapter, q);
}
@@ -1121,7 +1181,7 @@
return -1;
/* Ask BE to create Tx Event queue */
- if (be_cmd_eq_create(&adapter->ctrl, eq, adapter->tx_eq.cur_eqd))
+ if (be_cmd_eq_create(adapter, eq, adapter->tx_eq.cur_eqd))
goto tx_eq_free;
/* Alloc TX eth compl queue */
cq = &adapter->tx_obj.cq;
@@ -1130,7 +1190,7 @@
goto tx_eq_destroy;
/* Ask BE to create Tx eth compl queue */
- if (be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3))
+ if (be_cmd_cq_create(adapter, cq, eq, false, false, 3))
goto tx_cq_free;
/* Alloc TX eth queue */
@@ -1139,18 +1199,18 @@
goto tx_cq_destroy;
/* Ask BE to create Tx eth queue */
- if (be_cmd_txq_create(&adapter->ctrl, q, cq))
+ if (be_cmd_txq_create(adapter, q, cq))
goto tx_q_free;
return 0;
tx_q_free:
be_queue_free(adapter, q);
tx_cq_destroy:
- be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+ be_cmd_q_destroy(adapter, cq, QTYPE_CQ);
tx_cq_free:
be_queue_free(adapter, cq);
tx_eq_destroy:
- be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+ be_cmd_q_destroy(adapter, eq, QTYPE_EQ);
tx_eq_free:
be_queue_free(adapter, eq);
return -1;
@@ -1162,19 +1222,22 @@
q = &adapter->rx_obj.q;
if (q->created) {
- be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_RXQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_RXQ);
be_rx_q_clean(adapter);
}
be_queue_free(adapter, q);
q = &adapter->rx_obj.cq;
if (q->created)
- be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_CQ);
be_queue_free(adapter, q);
+ /* Clear any residual events */
+ be_eq_clean(adapter, &adapter->rx_eq);
+
q = &adapter->rx_eq.q;
if (q->created)
- be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+ be_cmd_q_destroy(adapter, q, QTYPE_EQ);
be_queue_free(adapter, q);
}
@@ -1183,7 +1246,6 @@
struct be_queue_info *eq, *q, *cq;
int rc;
- adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
adapter->rx_eq.max_eqd = BE_MAX_EQD;
adapter->rx_eq.min_eqd = 0;
@@ -1198,7 +1260,7 @@
return rc;
/* Ask BE to create Rx Event queue */
- rc = be_cmd_eq_create(&adapter->ctrl, eq, adapter->rx_eq.cur_eqd);
+ rc = be_cmd_eq_create(adapter, eq, adapter->rx_eq.cur_eqd);
if (rc)
goto rx_eq_free;
@@ -1210,7 +1272,7 @@
goto rx_eq_destroy;
/* Ask BE to create Rx eth compl queue */
- rc = be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3);
+ rc = be_cmd_cq_create(adapter, cq, eq, false, false, 3);
if (rc)
goto rx_cq_free;
@@ -1221,7 +1283,7 @@
goto rx_cq_destroy;
/* Ask BE to create Rx eth queue */
- rc = be_cmd_rxq_create(&adapter->ctrl, q, cq->id, rx_frag_size,
+ rc = be_cmd_rxq_create(adapter, q, cq->id, rx_frag_size,
BE_MAX_JUMBO_FRAME_SIZE, adapter->if_handle, false);
if (rc)
goto rx_q_free;
@@ -1230,68 +1292,43 @@
rx_q_free:
be_queue_free(adapter, q);
rx_cq_destroy:
- be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+ be_cmd_q_destroy(adapter, cq, QTYPE_CQ);
rx_cq_free:
be_queue_free(adapter, cq);
rx_eq_destroy:
- be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+ be_cmd_q_destroy(adapter, eq, QTYPE_EQ);
rx_eq_free:
be_queue_free(adapter, eq);
return rc;
}
-static bool event_get(struct be_eq_obj *eq_obj, u16 *rid)
+
+/* There are 8 evt ids per func. Retruns the evt id's bit number */
+static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
{
- struct be_eq_entry *entry = queue_tail_node(&eq_obj->q);
- u32 evt = entry->evt;
-
- if (!evt)
- return false;
-
- evt = le32_to_cpu(evt);
- *rid = (evt >> EQ_ENTRY_RES_ID_SHIFT) & EQ_ENTRY_RES_ID_MASK;
- entry->evt = 0;
- queue_tail_inc(&eq_obj->q);
- return true;
-}
-
-static int event_handle(struct be_ctrl_info *ctrl,
- struct be_eq_obj *eq_obj)
-{
- u16 rid = 0, num = 0;
-
- while (event_get(eq_obj, &rid))
- num++;
-
- /* We can see an interrupt and no event */
- be_eq_notify(ctrl, eq_obj->q.id, true, true, num);
- if (num)
- napi_schedule(&eq_obj->napi);
-
- return num;
+ return eq_id - 8 * be_pci_func(adapter);
}
static irqreturn_t be_intx(int irq, void *dev)
{
struct be_adapter *adapter = dev;
- struct be_ctrl_info *ctrl = &adapter->ctrl;
- int isr;
+ int isr;
- isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
- ctrl->pci_func * CEV_ISR_SIZE);
+ isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
+ be_pci_func(adapter) * CEV_ISR_SIZE);
if (!isr)
- return IRQ_NONE;
+ return IRQ_NONE;
- event_handle(ctrl, &adapter->tx_eq);
- event_handle(ctrl, &adapter->rx_eq);
+ event_handle(adapter, &adapter->tx_eq);
+ event_handle(adapter, &adapter->rx_eq);
- return IRQ_HANDLED;
+ return IRQ_HANDLED;
}
static irqreturn_t be_msix_rx(int irq, void *dev)
{
struct be_adapter *adapter = dev;
- event_handle(&adapter->ctrl, &adapter->rx_eq);
+ event_handle(adapter, &adapter->rx_eq);
return IRQ_HANDLED;
}
@@ -1300,12 +1337,12 @@
{
struct be_adapter *adapter = dev;
- event_handle(&adapter->ctrl, &adapter->tx_eq);
+ event_handle(adapter, &adapter->tx_eq);
return IRQ_HANDLED;
}
-static inline bool do_lro(struct be_adapter *adapter,
+static inline bool do_gro(struct be_adapter *adapter,
struct be_eth_rx_compl *rxcp)
{
int err = AMAP_GET_BITS(struct amap_eth_rx_compl, err, rxcp);
@@ -1314,8 +1351,7 @@
if (err)
drvr_stats(adapter)->be_rxcp_err++;
- return (!tcp_frame || err || (adapter->max_rx_coal <= 1)) ?
- false : true;
+ return (tcp_frame && !err) ? true : false;
}
int be_poll_rx(struct napi_struct *napi, int budget)
@@ -1332,16 +1368,14 @@
if (!rxcp)
break;
- if (do_lro(adapter, rxcp))
- be_rx_compl_process_lro(adapter, rxcp);
+ if (do_gro(adapter, rxcp))
+ be_rx_compl_process_gro(adapter, rxcp);
else
be_rx_compl_process(adapter, rxcp);
be_rx_compl_reset(rxcp);
}
- lro_flush_all(&adapter->rx_obj.lro_mgr);
-
/* Refill the queue */
if (atomic_read(&adapter->rx_obj.q.used) < RX_FRAGS_REFILL_WM)
be_post_rx_frags(adapter);
@@ -1349,10 +1383,10 @@
/* All consumed */
if (work_done < budget) {
napi_complete(napi);
- be_cq_notify(&adapter->ctrl, rx_cq->id, true, work_done);
+ be_cq_notify(adapter, rx_cq->id, true, work_done);
} else {
/* More to be consumed; continue with interrupts disabled */
- be_cq_notify(&adapter->ctrl, rx_cq->id, false, work_done);
+ be_cq_notify(adapter, rx_cq->id, false, work_done);
}
return work_done;
}
@@ -1373,7 +1407,7 @@
}
if (num_cmpl) {
- be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+ be_cq_notify(adapter, tx_cq->id, true, num_cmpl);
/* As Tx wrbs have been freed up, wake up netdev queue if
* it was stopped due to lack of tx wrbs.
@@ -1401,7 +1435,7 @@
be_process_tx(adapter);
- be_process_mcc(&adapter->ctrl);
+ be_process_mcc(adapter);
return 1;
}
@@ -1413,7 +1447,7 @@
int status;
/* Get Stats */
- status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
+ status = be_cmd_get_stats(adapter, &adapter->stats.cmd);
if (!status)
netdev_stats_update(adapter);
@@ -1447,32 +1481,44 @@
static inline int be_msix_vec_get(struct be_adapter *adapter, u32 eq_id)
{
- return adapter->msix_entries[eq_id -
- 8 * adapter->ctrl.pci_func].vector;
+ return adapter->msix_entries[
+ be_evt_bit_get(adapter, eq_id)].vector;
+}
+
+static int be_request_irq(struct be_adapter *adapter,
+ struct be_eq_obj *eq_obj,
+ void *handler, char *desc)
+{
+ struct net_device *netdev = adapter->netdev;
+ int vec;
+
+ sprintf(eq_obj->desc, "%s-%s", netdev->name, desc);
+ vec = be_msix_vec_get(adapter, eq_obj->q.id);
+ return request_irq(vec, handler, 0, eq_obj->desc, adapter);
+}
+
+static void be_free_irq(struct be_adapter *adapter, struct be_eq_obj *eq_obj)
+{
+ int vec = be_msix_vec_get(adapter, eq_obj->q.id);
+ free_irq(vec, adapter);
}
static int be_msix_register(struct be_adapter *adapter)
{
- struct net_device *netdev = adapter->netdev;
- struct be_eq_obj *tx_eq = &adapter->tx_eq;
- struct be_eq_obj *rx_eq = &adapter->rx_eq;
- int status, vec;
+ int status;
- sprintf(tx_eq->desc, "%s-tx", netdev->name);
- vec = be_msix_vec_get(adapter, tx_eq->q.id);
- status = request_irq(vec, be_msix_tx_mcc, 0, tx_eq->desc, adapter);
+ status = be_request_irq(adapter, &adapter->tx_eq, be_msix_tx_mcc, "tx");
if (status)
goto err;
- sprintf(rx_eq->desc, "%s-rx", netdev->name);
- vec = be_msix_vec_get(adapter, rx_eq->q.id);
- status = request_irq(vec, be_msix_rx, 0, rx_eq->desc, adapter);
- if (status) { /* Free TX IRQ */
- vec = be_msix_vec_get(adapter, tx_eq->q.id);
- free_irq(vec, adapter);
- goto err;
- }
+ status = be_request_irq(adapter, &adapter->rx_eq, be_msix_rx, "rx");
+ if (status)
+ goto free_tx_irq;
+
return 0;
+
+free_tx_irq:
+ be_free_irq(adapter, &adapter->tx_eq);
err:
dev_warn(&adapter->pdev->dev,
"MSIX Request IRQ failed - err %d\n", status);
@@ -1509,7 +1555,6 @@
static void be_irq_unregister(struct be_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int vec;
if (!adapter->isr_registered)
return;
@@ -1521,10 +1566,8 @@
}
/* MSIx */
- vec = be_msix_vec_get(adapter, adapter->tx_eq.q.id);
- free_irq(vec, adapter);
- vec = be_msix_vec_get(adapter, adapter->rx_eq.q.id);
- free_irq(vec, adapter);
+ be_free_irq(adapter, &adapter->tx_eq);
+ be_free_irq(adapter, &adapter->rx_eq);
done:
adapter->isr_registered = false;
return;
@@ -1533,7 +1576,6 @@
static int be_open(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
- struct be_ctrl_info *ctrl = &adapter->ctrl;
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
bool link_up;
@@ -1547,16 +1589,16 @@
be_irq_register(adapter);
- be_intr_set(ctrl, true);
+ be_intr_set(adapter, true);
/* The evt queues are created in unarmed state; arm them */
- be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
- be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+ be_eq_notify(adapter, rx_eq->q.id, true, false, 0);
+ be_eq_notify(adapter, tx_eq->q.id, true, false, 0);
/* Rx compl queue may be in unarmed state; rearm it */
- be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
+ be_cq_notify(adapter, adapter->rx_obj.cq.id, true, 0);
- status = be_cmd_link_status_query(ctrl, &link_up);
+ status = be_cmd_link_status_query(adapter, &link_up);
if (status)
return status;
be_link_status_update(adapter, link_up);
@@ -1567,7 +1609,6 @@
static int be_setup(struct be_adapter *adapter)
{
- struct be_ctrl_info *ctrl = &adapter->ctrl;
struct net_device *netdev = adapter->netdev;
u32 if_flags;
int status;
@@ -1575,7 +1616,7 @@
if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS |
BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED |
BE_IF_FLAGS_PASS_L3L4_ERRORS;
- status = be_cmd_if_create(ctrl, if_flags, netdev->dev_addr,
+ status = be_cmd_if_create(adapter, if_flags, netdev->dev_addr,
false/* pmac_invalid */, &adapter->if_handle,
&adapter->pmac_id);
if (status != 0)
@@ -1583,7 +1624,7 @@
be_vid_config(netdev);
- status = be_cmd_set_flow_control(ctrl, true, true);
+ status = be_cmd_set_flow_control(adapter, true, true);
if (status != 0)
goto if_destroy;
@@ -1606,28 +1647,25 @@
tx_qs_destroy:
be_tx_queues_destroy(adapter);
if_destroy:
- be_cmd_if_destroy(ctrl, adapter->if_handle);
+ be_cmd_if_destroy(adapter, adapter->if_handle);
do_none:
return status;
}
static int be_clear(struct be_adapter *adapter)
{
- struct be_ctrl_info *ctrl = &adapter->ctrl;
-
+ be_mcc_queues_destroy(adapter);
be_rx_queues_destroy(adapter);
be_tx_queues_destroy(adapter);
- be_cmd_if_destroy(ctrl, adapter->if_handle);
+ be_cmd_if_destroy(adapter, adapter->if_handle);
- be_mcc_queues_destroy(adapter);
return 0;
}
static int be_close(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
- struct be_ctrl_info *ctrl = &adapter->ctrl;
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
int vec;
@@ -1638,7 +1676,7 @@
netif_carrier_off(netdev);
adapter->link_up = false;
- be_intr_set(ctrl, false);
+ be_intr_set(adapter, false);
if (adapter->msix_enabled) {
vec = be_msix_vec_get(adapter, tx_eq->q.id);
@@ -1653,58 +1691,179 @@
napi_disable(&rx_eq->napi);
napi_disable(&tx_eq->napi);
+ /* Wait for all pending tx completions to arrive so that
+ * all tx skbs are freed.
+ */
+ be_tx_compl_clean(adapter);
+
return 0;
}
-static int be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
- void **ip_hdr, void **tcpudp_hdr,
- u64 *hdr_flags, void *priv)
+#define FW_FILE_HDR_SIGN "ServerEngines Corp. "
+char flash_cookie[2][16] = {"*** SE FLAS",
+ "H DIRECTORY *** "};
+static int be_flash_image(struct be_adapter *adapter,
+ const struct firmware *fw,
+ struct be_dma_mem *flash_cmd, u32 flash_type)
{
- struct ethhdr *eh;
- struct vlan_ethhdr *veh;
- struct iphdr *iph;
- u8 *va = page_address(frag->page) + frag->page_offset;
- unsigned long ll_hlen;
+ int status;
+ u32 flash_op, image_offset = 0, total_bytes, image_size = 0;
+ int num_bytes;
+ const u8 *p = fw->data;
+ struct be_cmd_write_flashrom *req = flash_cmd->va;
- prefetch(va);
- eh = (struct ethhdr *)va;
- *mac_hdr = eh;
- ll_hlen = ETH_HLEN;
- if (eh->h_proto != htons(ETH_P_IP)) {
- if (eh->h_proto == htons(ETH_P_8021Q)) {
- veh = (struct vlan_ethhdr *)va;
- if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
- return -1;
+ switch (flash_type) {
+ case FLASHROM_TYPE_ISCSI_ACTIVE:
+ image_offset = FLASH_iSCSI_PRIMARY_IMAGE_START;
+ image_size = FLASH_IMAGE_MAX_SIZE;
+ break;
+ case FLASHROM_TYPE_ISCSI_BACKUP:
+ image_offset = FLASH_iSCSI_BACKUP_IMAGE_START;
+ image_size = FLASH_IMAGE_MAX_SIZE;
+ break;
+ case FLASHROM_TYPE_FCOE_FW_ACTIVE:
+ image_offset = FLASH_FCoE_PRIMARY_IMAGE_START;
+ image_size = FLASH_IMAGE_MAX_SIZE;
+ break;
+ case FLASHROM_TYPE_FCOE_FW_BACKUP:
+ image_offset = FLASH_FCoE_BACKUP_IMAGE_START;
+ image_size = FLASH_IMAGE_MAX_SIZE;
+ break;
+ case FLASHROM_TYPE_BIOS:
+ image_offset = FLASH_iSCSI_BIOS_START;
+ image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
+ break;
+ case FLASHROM_TYPE_FCOE_BIOS:
+ image_offset = FLASH_FCoE_BIOS_START;
+ image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
+ break;
+ case FLASHROM_TYPE_PXE_BIOS:
+ image_offset = FLASH_PXE_BIOS_START;
+ image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
+ break;
+ default:
+ return 0;
+ }
- ll_hlen += VLAN_HLEN;
- } else {
+ p += sizeof(struct flash_file_hdr) + image_offset;
+ if (p + image_size > fw->data + fw->size)
+ return -1;
+
+ total_bytes = image_size;
+
+ while (total_bytes) {
+ if (total_bytes > 32*1024)
+ num_bytes = 32*1024;
+ else
+ num_bytes = total_bytes;
+ total_bytes -= num_bytes;
+
+ if (!total_bytes)
+ flash_op = FLASHROM_OPER_FLASH;
+ else
+ flash_op = FLASHROM_OPER_SAVE;
+ memcpy(req->params.data_buf, p, num_bytes);
+ p += num_bytes;
+ status = be_cmd_write_flashrom(adapter, flash_cmd,
+ flash_type, flash_op, num_bytes);
+ if (status) {
+ dev_err(&adapter->pdev->dev,
+ "cmd to write to flash rom failed. type/op %d/%d\n",
+ flash_type, flash_op);
return -1;
}
+ yield();
}
- *hdr_flags = LRO_IPV4;
- iph = (struct iphdr *)(va + ll_hlen);
- *ip_hdr = iph;
- if (iph->protocol != IPPROTO_TCP)
- return -1;
- *hdr_flags |= LRO_TCP;
- *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
return 0;
}
-static void be_lro_init(struct be_adapter *adapter, struct net_device *netdev)
+int be_load_fw(struct be_adapter *adapter, u8 *func)
{
- struct net_lro_mgr *lro_mgr;
+ char fw_file[ETHTOOL_FLASH_MAX_FILENAME];
+ const struct firmware *fw;
+ struct flash_file_hdr *fhdr;
+ struct flash_section_info *fsec = NULL;
+ struct be_dma_mem flash_cmd;
+ int status;
+ const u8 *p;
+ bool entry_found = false;
+ int flash_type;
+ char fw_ver[FW_VER_LEN];
+ char fw_cfg;
- lro_mgr = &adapter->rx_obj.lro_mgr;
- lro_mgr->dev = netdev;
- lro_mgr->features = LRO_F_NAPI;
- lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
- lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
- lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
- lro_mgr->lro_arr = adapter->rx_obj.lro_desc;
- lro_mgr->get_frag_header = be_get_frag_header;
- lro_mgr->max_aggr = BE_MAX_FRAGS_PER_FRAME;
+ status = be_cmd_get_fw_ver(adapter, fw_ver);
+ if (status)
+ return status;
+
+ fw_cfg = *(fw_ver + 2);
+ if (fw_cfg == '0')
+ fw_cfg = '1';
+ strcpy(fw_file, func);
+
+ status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
+ if (status)
+ goto fw_exit;
+
+ p = fw->data;
+ fhdr = (struct flash_file_hdr *) p;
+ if (memcmp(fhdr->sign, FW_FILE_HDR_SIGN, strlen(FW_FILE_HDR_SIGN))) {
+ dev_err(&adapter->pdev->dev,
+ "Firmware(%s) load error (signature did not match)\n",
+ fw_file);
+ status = -1;
+ goto fw_exit;
+ }
+
+ dev_info(&adapter->pdev->dev, "Flashing firmware file %s\n", fw_file);
+
+ p += sizeof(struct flash_file_hdr);
+ while (p < (fw->data + fw->size)) {
+ fsec = (struct flash_section_info *)p;
+ if (!memcmp(flash_cookie, fsec->cookie, sizeof(flash_cookie))) {
+ entry_found = true;
+ break;
+ }
+ p += 32;
+ }
+
+ if (!entry_found) {
+ status = -1;
+ dev_err(&adapter->pdev->dev,
+ "Flash cookie not found in firmware image\n");
+ goto fw_exit;
+ }
+
+ flash_cmd.size = sizeof(struct be_cmd_write_flashrom) + 32*1024;
+ flash_cmd.va = pci_alloc_consistent(adapter->pdev, flash_cmd.size,
+ &flash_cmd.dma);
+ if (!flash_cmd.va) {
+ status = -ENOMEM;
+ dev_err(&adapter->pdev->dev,
+ "Memory allocation failure while flashing\n");
+ goto fw_exit;
+ }
+
+ for (flash_type = FLASHROM_TYPE_ISCSI_ACTIVE;
+ flash_type <= FLASHROM_TYPE_FCOE_FW_BACKUP; flash_type++) {
+ status = be_flash_image(adapter, fw, &flash_cmd,
+ flash_type);
+ if (status)
+ break;
+ }
+
+ pci_free_consistent(adapter->pdev, flash_cmd.size, flash_cmd.va,
+ flash_cmd.dma);
+ if (status) {
+ dev_err(&adapter->pdev->dev, "Firmware load error\n");
+ goto fw_exit;
+ }
+
+ dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n");
+
+fw_exit:
+ release_firmware(fw);
+ return status;
}
static struct net_device_ops be_netdev_ops = {
@@ -1727,18 +1886,18 @@
netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM;
+ NETIF_F_IPV6_CSUM | NETIF_F_GRO;
netdev->flags |= IFF_MULTICAST;
adapter->rx_csum = true;
+ netif_set_gso_max_size(netdev, 65535);
+
BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
- be_lro_init(adapter, netdev);
-
netif_napi_add(netdev, &adapter->rx_eq.napi, be_poll_rx,
BE_NAPI_WEIGHT);
netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx_mcc,
@@ -1750,13 +1909,12 @@
static void be_unmap_pci_bars(struct be_adapter *adapter)
{
- struct be_ctrl_info *ctrl = &adapter->ctrl;
- if (ctrl->csr)
- iounmap(ctrl->csr);
- if (ctrl->db)
- iounmap(ctrl->db);
- if (ctrl->pcicfg)
- iounmap(ctrl->pcicfg);
+ if (adapter->csr)
+ iounmap(adapter->csr);
+ if (adapter->db)
+ iounmap(adapter->db);
+ if (adapter->pcicfg)
+ iounmap(adapter->pcicfg);
}
static int be_map_pci_bars(struct be_adapter *adapter)
@@ -1767,19 +1925,19 @@
pci_resource_len(adapter->pdev, 2));
if (addr == NULL)
return -ENOMEM;
- adapter->ctrl.csr = addr;
+ adapter->csr = addr;
addr = ioremap_nocache(pci_resource_start(adapter->pdev, 4),
128 * 1024);
if (addr == NULL)
goto pci_map_err;
- adapter->ctrl.db = addr;
+ adapter->db = addr;
addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
pci_resource_len(adapter->pdev, 1));
if (addr == NULL)
goto pci_map_err;
- adapter->ctrl.pcicfg = addr;
+ adapter->pcicfg = addr;
return 0;
pci_map_err:
@@ -1790,7 +1948,7 @@
static void be_ctrl_cleanup(struct be_adapter *adapter)
{
- struct be_dma_mem *mem = &adapter->ctrl.mbox_mem_alloced;
+ struct be_dma_mem *mem = &adapter->mbox_mem_alloced;
be_unmap_pci_bars(adapter);
@@ -1799,14 +1957,11 @@
mem->va, mem->dma);
}
-/* Initialize the mbox required to send cmds to BE */
static int be_ctrl_init(struct be_adapter *adapter)
{
- struct be_ctrl_info *ctrl = &adapter->ctrl;
- struct be_dma_mem *mbox_mem_alloc = &ctrl->mbox_mem_alloced;
- struct be_dma_mem *mbox_mem_align = &ctrl->mbox_mem;
+ struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced;
+ struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem;
int status;
- u32 val;
status = be_map_pci_bars(adapter);
if (status)
@@ -1823,16 +1978,10 @@
mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
- spin_lock_init(&ctrl->mbox_lock);
- spin_lock_init(&ctrl->mcc_lock);
- spin_lock_init(&ctrl->mcc_cq_lock);
+ spin_lock_init(&adapter->mbox_lock);
+ spin_lock_init(&adapter->mcc_lock);
+ spin_lock_init(&adapter->mcc_cq_lock);
- ctrl->async_cb = be_link_status_update;
- ctrl->adapter_ctxt = adapter;
-
- val = ioread32(ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
- ctrl->pci_func = (val >> MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT) &
- MEMBAR_CTRL_INT_CTRL_PFUNC_MASK;
return 0;
}
@@ -1886,18 +2035,17 @@
static int be_hw_up(struct be_adapter *adapter)
{
- struct be_ctrl_info *ctrl = &adapter->ctrl;
int status;
- status = be_cmd_POST(ctrl);
+ status = be_cmd_POST(adapter);
if (status)
return status;
- status = be_cmd_get_fw_ver(ctrl, adapter->fw_ver);
+ status = be_cmd_get_fw_ver(adapter, adapter->fw_ver);
if (status)
return status;
- status = be_cmd_query_fw_cfg(ctrl, &adapter->port_num);
+ status = be_cmd_query_fw_cfg(adapter, &adapter->port_num);
return status;
}
@@ -1907,7 +2055,6 @@
int status = 0;
struct be_adapter *adapter;
struct net_device *netdev;
- struct be_ctrl_info *ctrl;
u8 mac[ETH_ALEN];
status = pci_enable_device(pdev);
@@ -1942,11 +2089,14 @@
}
}
- ctrl = &adapter->ctrl;
status = be_ctrl_init(adapter);
if (status)
goto free_netdev;
+ status = be_cmd_reset_function(adapter);
+ if (status)
+ goto ctrl_clean;
+
status = be_stats_init(adapter);
if (status)
goto ctrl_clean;
@@ -1955,7 +2105,7 @@
if (status)
goto stats_clean;
- status = be_cmd_mac_addr_query(ctrl, mac, MAC_ADDRESS_TYPE_NETWORK,
+ status = be_cmd_mac_addr_query(adapter, mac, MAC_ADDRESS_TYPE_NETWORK,
true /* permanent */, 0);
if (status)
goto stats_clean;
@@ -2001,9 +2151,9 @@
if (netif_running(netdev)) {
rtnl_lock();
be_close(netdev);
- be_clear(adapter);
rtnl_unlock();
}
+ be_clear(adapter);
pci_save_state(pdev);
pci_disable_device(pdev);
@@ -2026,9 +2176,9 @@
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
+ be_setup(adapter);
if (netif_running(netdev)) {
rtnl_lock();
- be_setup(adapter);
be_open(netdev);
rtnl_unlock();
}
@@ -2054,12 +2204,6 @@
" Using 2048\n");
rx_frag_size = 2048;
}
- /* Ensure rx_frag_size is aligned to chache line */
- if (SKB_DATA_ALIGN(rx_frag_size) != rx_frag_size) {
- printk(KERN_WARNING DRV_NAME
- " : Bad module param rx_frag_size. Using 2048\n");
- rx_frag_size = 2048;
- }
return pci_register_driver(&be_driver);
}
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c15fc28..14bd380 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -491,7 +491,7 @@
strcpy(info->bus_info, dev_name(&dev->dev));
}
-static struct ethtool_ops bfin_mac_ethtool_ops = {
+static const struct ethtool_ops bfin_mac_ethtool_ops = {
.get_settings = bfin_mac_ethtool_getsettings,
.set_settings = bfin_mac_ethtool_setsettings,
.get_link = ethtool_op_get_link,
@@ -656,7 +656,7 @@
dev->trans_start = jiffies;
dev->stats.tx_packets++;
dev->stats.tx_bytes += (skb->len);
- return 0;
+ return NETDEV_TX_OK;
}
static void bfin_mac_rx(struct net_device *dev)
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 206144f..406f064 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1489,7 +1489,7 @@
struct bmac_data *bp = netdev_priv(dev);
skb_queue_tail(bp->queue, skb);
bmac_start(dev);
- return 0;
+ return NETDEV_TX_OK;
}
static void bmac_tx_timeout(unsigned long data)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 06b9011..08cddb6 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -59,12 +59,13 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "2.0.1"
-#define DRV_MODULE_RELDATE "May 6, 2009"
-#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw"
-#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw"
-#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw"
-#define FW_RV2P_FILE_09 "bnx2/bnx2-rv2p-09-4.6.15.fw"
+#define DRV_MODULE_VERSION "2.0.2"
+#define DRV_MODULE_RELDATE "Aug 21, 2009"
+#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-5.0.0.j3.fw"
+#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-5.0.0.j3.fw"
+#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-5.0.0.j3.fw"
+#define FW_RV2P_FILE_09_Ax "bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw"
+#define FW_RV2P_FILE_09 "bnx2/bnx2-rv2p-09-5.0.0.j3.fw"
#define RUN_AT(x) (jiffies + (x))
@@ -82,6 +83,7 @@
MODULE_FIRMWARE(FW_RV2P_FILE_06);
MODULE_FIRMWARE(FW_MIPS_FILE_09);
MODULE_FIRMWARE(FW_RV2P_FILE_09);
+MODULE_FIRMWARE(FW_RV2P_FILE_09_Ax);
static int disable_msi = 0;
@@ -145,7 +147,7 @@
{ 0, }
};
-static struct flash_spec flash_table[] =
+static const struct flash_spec flash_table[] =
{
#define BUFFERED_FLAGS (BNX2_NV_BUFFERED | BNX2_NV_TRANSLATE)
#define NONBUFFERED_FLAGS (BNX2_NV_WREN)
@@ -234,7 +236,7 @@
"Buffered flash (256kB)"},
};
-static struct flash_spec flash_5709 = {
+static const struct flash_spec flash_5709 = {
.flags = BNX2_NV_BUFFERED,
.page_bits = BCM5709_FLASH_PAGE_BITS,
.page_size = BCM5709_FLASH_PAGE_SIZE,
@@ -621,6 +623,9 @@
int i;
atomic_inc(&bp->intr_sem);
+ if (!netif_running(bp->dev))
+ return;
+
bnx2_disable_int(bp);
for (i = 0; i < bp->irq_nvecs; i++)
synchronize_irq(bp->irq_tbl[i].vector);
@@ -3620,7 +3625,11 @@
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
mips_fw_file = FW_MIPS_FILE_09;
- rv2p_fw_file = FW_RV2P_FILE_09;
+ if ((CHIP_ID(bp) == CHIP_ID_5709_A0) ||
+ (CHIP_ID(bp) == CHIP_ID_5709_A1))
+ rv2p_fw_file = FW_RV2P_FILE_09_Ax;
+ else
+ rv2p_fw_file = FW_RV2P_FILE_09;
} else {
mips_fw_file = FW_MIPS_FILE_06;
rv2p_fw_file = FW_RV2P_FILE_06;
@@ -4226,7 +4235,7 @@
{
u32 val;
int j, entry_count, rc = 0;
- struct flash_spec *flash;
+ const struct flash_spec *flash;
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
bp->flash_info = &flash_5709;
@@ -4860,6 +4869,7 @@
bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG2, BNX2_RBUF_CONFIG2_VAL(mtu));
bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG3, BNX2_RBUF_CONFIG3_VAL(mtu));
+ memset(bp->bnx2_napi[0].status_blk.msi, 0, bp->status_stats_size);
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
bp->bnx2_napi[i].last_status_idx = 0;
@@ -4898,7 +4908,7 @@
REG_WR(bp, BNX2_HC_CMD_TICKS,
(bp->cmd_ticks_int << 16) | bp->cmd_ticks);
- if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ if (bp->flags & BNX2_FLAG_BROKEN_STATS)
REG_WR(bp, BNX2_HC_STATS_TICKS, 0);
else
REG_WR(bp, BNX2_HC_STATS_TICKS, bp->stats_ticks);
@@ -4919,7 +4929,7 @@
}
if (bp->flags & BNX2_FLAG_ONE_SHOT_MSI)
- val |= BNX2_HC_CONFIG_ONE_SHOT;
+ val |= BNX2_HC_CONFIG_ONE_SHOT | BNX2_HC_CONFIG_USE_INT_PARAM;
REG_WR(bp, BNX2_HC_CONFIG, val);
@@ -6023,7 +6033,7 @@
bnx2_reg_rd_ind(bp, BNX2_FW_RX_DROP_COUNT);
/* workaround occasional corrupted counters */
- if (CHIP_NUM(bp) == CHIP_NUM_5708 && bp->stats_ticks)
+ if ((bp->flags & BNX2_FLAG_BROKEN_STATS) && bp->stats_ticks)
REG_WR(bp, BNX2_HC_COMMAND, bp->hc_cmd |
BNX2_HC_COMMAND_STATS_NOW);
@@ -6255,9 +6265,14 @@
{
struct bnx2 *bp = netdev_priv(dev);
- bnx2_netif_stop(bp);
+ if (netif_running(dev))
+ bnx2_netif_stop(bp);
bp->vlgrp = vlgrp;
+
+ if (!netif_running(dev))
+ return;
+
bnx2_set_rx_mode(dev);
if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
@@ -6270,7 +6285,7 @@
* bnx2_tx_int() runs without netif_tx_lock unless it needs to call
* netif_wake_queue().
*/
-static int
+static netdev_tx_t
bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bnx2 *bp = netdev_priv(dev);
@@ -6478,7 +6493,8 @@
stats_blk->stat_EtherStatsOverrsizePkts);
net_stats->rx_over_errors =
- (unsigned long) stats_blk->stat_IfInMBUFDiscards;
+ (unsigned long) (stats_blk->stat_IfInFTQDiscards +
+ stats_blk->stat_IfInMBUFDiscards);
net_stats->rx_frame_errors =
(unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors;
@@ -6511,8 +6527,8 @@
net_stats->tx_carrier_errors;
net_stats->rx_missed_errors =
- (unsigned long) (stats_blk->stat_IfInMBUFDiscards +
- stats_blk->stat_FwRxDrop);
+ (unsigned long) (stats_blk->stat_IfInFTQDiscards +
+ stats_blk->stat_IfInMBUFDiscards + stats_blk->stat_FwRxDrop);
return net_stats;
}
@@ -6934,7 +6950,7 @@
0xff;
bp->stats_ticks = coal->stats_block_coalesce_usecs;
- if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ if (bp->flags & BNX2_FLAG_BROKEN_STATS) {
if (bp->stats_ticks != 0 && bp->stats_ticks != USEC_PER_SEC)
bp->stats_ticks = USEC_PER_SEC;
}
@@ -6985,9 +7001,14 @@
int rc;
rc = bnx2_alloc_mem(bp);
- if (rc)
+ if (!rc)
+ rc = bnx2_init_nic(bp, 0);
+
+ if (rc) {
+ bnx2_napi_enable(bp);
+ dev_close(bp->dev);
return rc;
- bnx2_init_nic(bp, 0);
+ }
bnx2_netif_start(bp);
}
return 0;
@@ -7078,11 +7099,9 @@
return 0;
}
-#define BNX2_NUM_STATS 46
-
static struct {
char string[ETH_GSTRING_LEN];
-} bnx2_stats_str_arr[BNX2_NUM_STATS] = {
+} bnx2_stats_str_arr[] = {
{ "rx_bytes" },
{ "rx_error_bytes" },
{ "tx_bytes" },
@@ -7127,10 +7146,14 @@
{ "tx_xoff_frames" },
{ "rx_mac_ctrl_frames" },
{ "rx_filtered_packets" },
+ { "rx_ftq_discards" },
{ "rx_discards" },
{ "rx_fw_discards" },
};
+#define BNX2_NUM_STATS (sizeof(bnx2_stats_str_arr)/\
+ sizeof(bnx2_stats_str_arr[0]))
+
#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4)
static const unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
@@ -7178,6 +7201,7 @@
STATS_OFFSET32(stat_OutXoffSent),
STATS_OFFSET32(stat_MacControlFramesReceived),
STATS_OFFSET32(stat_IfInFramesL2FilterDiscards),
+ STATS_OFFSET32(stat_IfInFTQDiscards),
STATS_OFFSET32(stat_IfInMBUFDiscards),
STATS_OFFSET32(stat_FwRxDrop),
};
@@ -7190,7 +7214,7 @@
4,0,4,4,4,4,4,4,4,4,
4,4,4,4,4,4,4,4,4,4,
4,4,4,4,4,4,4,4,4,4,
- 4,4,4,4,4,4,
+ 4,4,4,4,4,4,4,
};
static u8 bnx2_5708_stats_len_arr[BNX2_NUM_STATS] = {
@@ -7198,7 +7222,7 @@
4,4,4,4,4,4,4,4,4,4,
4,4,4,4,4,4,4,4,4,4,
4,4,4,4,4,4,4,4,4,4,
- 4,4,4,4,4,4,
+ 4,4,4,4,4,4,4,
};
#define BNX2_NUM_TESTS 6
@@ -7456,9 +7480,6 @@
}
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
if (bp->phy_flags & BNX2_PHY_FLAG_REMOTE_PHY_CAP)
return -EOPNOTSUPP;
@@ -7713,6 +7734,7 @@
rc = -EIO;
goto err_out_unmap;
}
+ bp->flags |= BNX2_FLAG_BROKEN_STATS;
}
if (CHIP_NUM(bp) == CHIP_NUM_5709 && CHIP_REV(bp) != CHIP_REV_Ax) {
@@ -7844,13 +7866,13 @@
bp->rx_csum = 1;
- bp->tx_quick_cons_trip_int = 20;
+ bp->tx_quick_cons_trip_int = 2;
bp->tx_quick_cons_trip = 20;
- bp->tx_ticks_int = 80;
+ bp->tx_ticks_int = 18;
bp->tx_ticks = 80;
- bp->rx_quick_cons_trip_int = 6;
- bp->rx_quick_cons_trip = 6;
+ bp->rx_quick_cons_trip_int = 2;
+ bp->rx_quick_cons_trip = 12;
bp->rx_ticks_int = 18;
bp->rx_ticks = 18;
@@ -8028,6 +8050,13 @@
#endif
};
+static void inline vlan_features_add(struct net_device *dev, unsigned long flags)
+{
+#ifdef BCM_VLAN
+ dev->vlan_features |= flags;
+#endif
+}
+
static int __devinit
bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -8069,16 +8098,20 @@
memcpy(dev->perm_addr, bp->mac_addr, 6);
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ vlan_features_add(dev, NETIF_F_IP_CSUM | NETIF_F_SG);
+ if (CHIP_NUM(bp) == CHIP_NUM_5709) {
dev->features |= NETIF_F_IPV6_CSUM;
-
+ vlan_features_add(dev, NETIF_F_IPV6_CSUM);
+ }
#ifdef BCM_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
#endif
dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
- if (CHIP_NUM(bp) == CHIP_NUM_5709)
+ vlan_features_add(dev, NETIF_F_TSO | NETIF_F_TSO_ECN);
+ if (CHIP_NUM(bp) == CHIP_NUM_5709) {
dev->features |= NETIF_F_TSO6;
-
+ vlan_features_add(dev, NETIF_F_TSO6);
+ }
if ((rc = register_netdev(dev))) {
dev_err(&pdev->dev, "Cannot register net device\n");
goto error;
@@ -8193,6 +8226,11 @@
rtnl_lock();
netif_device_detach(dev);
+ if (state == pci_channel_io_perm_failure) {
+ rtnl_unlock();
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
if (netif_running(dev)) {
bnx2_netif_stop(bp);
del_timer_sync(&bp->timer);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index a4f12fd..6c7f795 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6718,6 +6718,7 @@
BNX2_FLAG_USING_MSIX)
#define BNX2_FLAG_JUMBO_BROKEN 0x00000800
#define BNX2_FLAG_CAN_KEEP_VLAN 0x00001000
+#define BNX2_FLAG_BROKEN_STATS 0x00002000
struct bnx2_napi bnx2_napi[BNX2_MAX_MSIX_VEC];
@@ -6888,7 +6889,7 @@
int pm_cap;
int pcix_cap;
- struct flash_spec *flash_info;
+ const struct flash_spec *flash_info;
u32 flash_size;
int status_stats_size;
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 85a737c..bbf8422 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -30,6 +30,8 @@
#define BNX2X_NEW_NAPI
+
+#include <linux/mdio.h>
#include "bnx2x_reg.h"
#include "bnx2x_fw_defs.h"
#include "bnx2x_hsi.h"
@@ -87,6 +89,7 @@
} while (0)
#else
#define bnx2x_panic() do { \
+ bp->panic = 1; \
BNX2X_ERR("driver assert\n"); \
bnx2x_panic_dump(bp); \
} while (0)
@@ -113,21 +116,32 @@
#define REG_RD_DMAE(bp, offset, valp, len32) \
do { \
bnx2x_read_dmae(bp, offset, len32);\
- memcpy(valp, bnx2x_sp(bp, wb_data[0]), len32 * 4); \
+ memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \
} while (0)
#define REG_WR_DMAE(bp, offset, valp, len32) \
do { \
- memcpy(bnx2x_sp(bp, wb_data[0]), valp, len32 * 4); \
+ memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \
bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \
offset, len32); \
} while (0)
+#define VIRT_WR_DMAE_LEN(bp, data, addr, len32) \
+ do { \
+ memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
+ bnx2x_write_big_buf_wb(bp, addr, len32); \
+ } while (0)
+
#define SHMEM_ADDR(bp, field) (bp->common.shmem_base + \
offsetof(struct shmem_region, field))
#define SHMEM_RD(bp, field) REG_RD(bp, SHMEM_ADDR(bp, field))
#define SHMEM_WR(bp, field, val) REG_WR(bp, SHMEM_ADDR(bp, field), val)
+#define SHMEM2_ADDR(bp, field) (bp->common.shmem2_base + \
+ offsetof(struct shmem2_region, field))
+#define SHMEM2_RD(bp, field) REG_RD(bp, SHMEM2_ADDR(bp, field))
+#define SHMEM2_WR(bp, field, val) REG_WR(bp, SHMEM2_ADDR(bp, field), val)
+
#define EMAC_RD(bp, reg) REG_RD(bp, emac_base + reg)
#define EMAC_WR(bp, reg, val) REG_WR(bp, emac_base + reg, val)
@@ -142,6 +156,9 @@
struct sw_tx_bd {
struct sk_buff *skb;
u16 first_bd;
+ u8 flags;
+/* Set on the first BD descriptor when there is a split BD */
+#define BNX2X_TSO_SPLIT_BD (1<<0)
};
struct sw_rx_page {
@@ -149,6 +166,11 @@
DECLARE_PCI_UNMAP_ADDR(mapping)
};
+union db_prod {
+ struct doorbell_set_prod data;
+ u32 raw;
+};
+
/* MC hsi */
#define BCM_PAGE_SHIFT 12
@@ -160,7 +182,7 @@
#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
#define SGE_PAGE_SIZE PAGE_SIZE
#define SGE_PAGE_SHIFT PAGE_SHIFT
-#define SGE_PAGE_ALIGN(addr) PAGE_ALIGN((typeof(PAGE_SIZE))addr)
+#define SGE_PAGE_ALIGN(addr) PAGE_ALIGN((typeof(PAGE_SIZE))(addr))
/* SGE ring related macros */
#define NUM_RX_SGE_PAGES 2
@@ -234,15 +256,14 @@
struct napi_struct napi;
+ u8 is_rx_queue;
+
struct host_status_block *status_blk;
dma_addr_t status_blk_mapping;
- struct eth_tx_db_data *hw_tx_prods;
- dma_addr_t tx_prods_mapping;
-
struct sw_tx_bd *tx_buf_ring;
- struct eth_tx_bd *tx_desc_ring;
+ union eth_tx_bd_types *tx_desc_ring;
dma_addr_t tx_desc_mapping;
struct sw_rx_bd *rx_buf_ring; /* BDs mappings ring */
@@ -272,6 +293,8 @@
u8 cl_id; /* eth client id */
u8 sb_id; /* status block number in HW */
+ union db_prod tx_db;
+
u16 tx_pkt_prod;
u16 tx_pkt_cons;
u16 tx_bd_prod;
@@ -291,9 +314,11 @@
__le16 *rx_cons_sb;
__le16 *rx_bd_cons_sb;
+
unsigned long tx_pkt,
rx_pkt,
rx_calls;
+
/* TPA related */
struct sw_rx_bd tpa_pool[ETH_MAX_AGGREGATION_QUEUES_E1H];
u8 tpa_state[ETH_MAX_AGGREGATION_QUEUES_E1H];
@@ -309,21 +334,24 @@
struct xstorm_per_client_stats old_xclient;
struct bnx2x_eth_q_stats eth_q_stats;
- char name[IFNAMSIZ];
+ /* The size is calculated using the following:
+ sizeof name field from netdev structure +
+ 4 ('-Xx-' string) +
+ 4 (for the digits and to make it DWORD aligned) */
+#define FP_NAME_SIZE (sizeof(((struct net_device *)0)->name) + 8)
+ char name[FP_NAME_SIZE];
struct bnx2x *bp; /* parent */
};
#define bnx2x_fp(bp, nr, var) (bp->fp[nr].var)
-#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))
-
/* MC hsi */
#define MAX_FETCH_BD 13 /* HW max BDs per packet */
#define RX_COPY_THRESH 92
#define NUM_TX_RINGS 16
-#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_tx_bd))
+#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1)
#define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS)
#define MAX_TX_BD (NUM_TX_BD - 1)
@@ -395,7 +423,7 @@
#define DPM_TRIGER_TYPE 0x40
#define DOORBELL(bp, cid, val) \
do { \
- writel((u32)val, (bp)->doorbells + (BCM_PAGE_SIZE * cid) + \
+ writel((u32)(val), bp->doorbells + (BCM_PAGE_SIZE * (cid)) + \
DPM_TRIGER_TYPE); \
} while (0)
@@ -523,6 +551,7 @@
#define NVRAM_PAGE_SIZE 256
u32 shmem_base;
+ u32 shmem2_base;
u32 hw_config;
@@ -757,6 +786,7 @@
struct nig_stats nig_stats;
struct host_port_stats port_stats;
struct host_func_stats func_stats;
+ struct host_func_stats func_stats_base;
u32 wb_comp;
u32 wb_data[4];
@@ -877,6 +907,7 @@
struct link_params link_params;
struct link_vars link_vars;
+ struct mdio_if_info mdio;
struct bnx2x_common common;
struct bnx2x_port port;
@@ -902,8 +933,6 @@
u16 rx_quick_cons_trip;
u16 rx_ticks_int;
u16 rx_ticks;
-/* Maximal coalescing timeout in us */
-#define BNX2X_MAX_COALESCE_TOUT (0xf0*12)
u32 lin_cnt;
@@ -947,10 +976,11 @@
dma_addr_t qm_mapping;
#endif
+ int dropless_fc;
+
int dmae_ready;
/* used to synchronize dmae accesses */
struct mutex dmae_mutex;
- struct dmae_command init_dmae;
/* used to synchronize stats collecting */
int stats_state;
@@ -966,38 +996,54 @@
dma_addr_t gunzip_mapping;
int gunzip_outlen;
#define FW_BUF_SIZE 0x8000
+#define GUNZIP_BUF(bp) (bp->gunzip_buf)
+#define GUNZIP_PHYS(bp) (bp->gunzip_mapping)
+#define GUNZIP_OUTLEN(bp) (bp->gunzip_outlen)
- struct raw_op *init_ops;
+ struct raw_op *init_ops;
/* Init blocks offsets inside init_ops */
- u16 *init_ops_offsets;
+ u16 *init_ops_offsets;
/* Data blob - has 32 bit granularity */
- u32 *init_data;
+ u32 *init_data;
/* Zipped PRAM blobs - raw data */
- const u8 *tsem_int_table_data;
- const u8 *tsem_pram_data;
- const u8 *usem_int_table_data;
- const u8 *usem_pram_data;
- const u8 *xsem_int_table_data;
- const u8 *xsem_pram_data;
- const u8 *csem_int_table_data;
- const u8 *csem_pram_data;
- const struct firmware *firmware;
+ const u8 *tsem_int_table_data;
+ const u8 *tsem_pram_data;
+ const u8 *usem_int_table_data;
+ const u8 *usem_pram_data;
+ const u8 *xsem_int_table_data;
+ const u8 *xsem_pram_data;
+ const u8 *csem_int_table_data;
+ const u8 *csem_pram_data;
+#define INIT_OPS(bp) (bp->init_ops)
+#define INIT_OPS_OFFSETS(bp) (bp->init_ops_offsets)
+#define INIT_DATA(bp) (bp->init_data)
+#define INIT_TSEM_INT_TABLE_DATA(bp) (bp->tsem_int_table_data)
+#define INIT_TSEM_PRAM_DATA(bp) (bp->tsem_pram_data)
+#define INIT_USEM_INT_TABLE_DATA(bp) (bp->usem_int_table_data)
+#define INIT_USEM_PRAM_DATA(bp) (bp->usem_pram_data)
+#define INIT_XSEM_INT_TABLE_DATA(bp) (bp->xsem_int_table_data)
+#define INIT_XSEM_PRAM_DATA(bp) (bp->xsem_pram_data)
+#define INIT_CSEM_INT_TABLE_DATA(bp) (bp->csem_int_table_data)
+#define INIT_CSEM_PRAM_DATA(bp) (bp->csem_pram_data)
+
+ const struct firmware *firmware;
};
-#define BNX2X_MAX_QUEUES(bp) (IS_E1HMF(bp) ? (MAX_CONTEXT / E1HVN_MAX) : \
- MAX_CONTEXT)
-#define BNX2X_NUM_QUEUES(bp) max(bp->num_rx_queues, bp->num_tx_queues)
-#define is_multi(bp) (BNX2X_NUM_QUEUES(bp) > 1)
+#define BNX2X_MAX_QUEUES(bp) (IS_E1HMF(bp) ? (MAX_CONTEXT/(2 * E1HVN_MAX)) \
+ : (MAX_CONTEXT/2))
+#define BNX2X_NUM_QUEUES(bp) (bp->num_rx_queues + bp->num_tx_queues)
+#define is_multi(bp) (BNX2X_NUM_QUEUES(bp) > 2)
#define for_each_rx_queue(bp, var) \
for (var = 0; var < bp->num_rx_queues; var++)
#define for_each_tx_queue(bp, var) \
- for (var = 0; var < bp->num_tx_queues; var++)
+ for (var = bp->num_rx_queues; \
+ var < BNX2X_NUM_QUEUES(bp); var++)
#define for_each_queue(bp, var) \
for (var = 0; var < BNX2X_NUM_QUEUES(bp); var++)
#define for_each_nondefault_queue(bp, var) \
- for (var = 1; var < BNX2X_NUM_QUEUES(bp); var++)
+ for (var = 1; var < bp->num_rx_queues; var++)
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
@@ -1006,6 +1052,10 @@
int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
+u32 bnx2x_fw_command(struct bnx2x *bp, u32 command);
+void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
+ u32 addr, u32 len);
static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
int wait)
@@ -1063,9 +1113,9 @@
#define DMAE_COMP_VAL 0xe0d0d0ae
#define MAX_DMAE_C_PER_PORT 8
-#define INIT_DMAE_C(bp) (BP_PORT(bp)*MAX_DMAE_C_PER_PORT + \
+#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
BP_E1HVN(bp))
-#define PMF_DMAE_C(bp) (BP_PORT(bp)*MAX_DMAE_C_PER_PORT + \
+#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
E1HVN_MAX)
@@ -1090,7 +1140,8 @@
/* must be used on a CID before placing it on a HW ring */
-#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | (BP_E1HVN(bp) << 17) | x)
+#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \
+ (BP_E1HVN(bp) << 17) | (x))
#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe))
#define MAX_SP_DESC_CNT (SP_DESC_CNT - 1)
@@ -1178,8 +1229,8 @@
AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \
- AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
+ AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \
@@ -1207,7 +1258,6 @@
TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY | \
(bp->multi_mode << \
TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE_SHIFT))
-
#define MULTI_MASK 0x7f
diff --git a/drivers/net/bnx2x_dump.h b/drivers/net/bnx2x_dump.h
index 78c6b03..3bb9a91 100644
--- a/drivers/net/bnx2x_dump.h
+++ b/drivers/net/bnx2x_dump.h
@@ -13,31 +13,35 @@
* The signature is time stamp, diag version and grc_dump version
*/
+#ifndef BNX2X_DUMP_H
+#define BNX2X_DUMP_H
+
+
struct dump_sign {
u32 time_stamp;
u32 diag_ver;
u32 grc_dump_ver;
};
-#define TSTORM_WAITP_ADDR 0x1b8a80
-#define CSTORM_WAITP_ADDR 0x238a80
-#define XSTORM_WAITP_ADDR 0x2b8a80
-#define USTORM_WAITP_ADDR 0x338a80
-#define TSTORM_CAM_MODE 0x1b1440
+#define TSTORM_WAITP_ADDR 0x1b8a80
+#define CSTORM_WAITP_ADDR 0x238a80
+#define XSTORM_WAITP_ADDR 0x2b8a80
+#define USTORM_WAITP_ADDR 0x338a80
+#define TSTORM_CAM_MODE 0x1b1440
-#define RI_E1 0x1
-#define RI_E1H 0x2
-#define RI_ONLINE 0x100
+#define RI_E1 0x1
+#define RI_E1H 0x2
+#define RI_ONLINE 0x100
-#define RI_E1_OFFLINE (RI_E1)
-#define RI_E1_ONLINE (RI_E1 | RI_ONLINE)
-#define RI_E1H_OFFLINE (RI_E1H)
-#define RI_E1H_ONLINE (RI_E1H | RI_ONLINE)
-#define RI_ALL_OFFLINE (RI_E1 | RI_E1H)
-#define RI_ALL_ONLINE (RI_E1 | RI_E1H | RI_ONLINE)
+#define RI_E1_OFFLINE (RI_E1)
+#define RI_E1_ONLINE (RI_E1 | RI_ONLINE)
+#define RI_E1H_OFFLINE (RI_E1H)
+#define RI_E1H_ONLINE (RI_E1H | RI_ONLINE)
+#define RI_ALL_OFFLINE (RI_E1 | RI_E1H)
+#define RI_ALL_ONLINE (RI_E1 | RI_E1H | RI_ONLINE)
-#define MAX_TIMER_PENDING 200
-#define TIMER_SCAN_DONT_CARE 0xFF
+#define MAX_TIMER_PENDING 200
+#define TIMER_SCAN_DONT_CARE 0xFF
struct dump_hdr {
@@ -67,443 +71,444 @@
};
-#define REGS_COUNT 558
+#define REGS_COUNT 558
static const struct reg_addr reg_addrs[REGS_COUNT] = {
- { 0x2000, 341, RI_ALL_ONLINE}, { 0x2800, 103, RI_ALL_ONLINE},
- { 0x3000, 287, RI_ALL_ONLINE}, { 0x3800, 331, RI_ALL_ONLINE},
- { 0x8800, 6, RI_E1_ONLINE}, { 0xa000, 223, RI_ALL_ONLINE},
- { 0xa388, 1, RI_ALL_ONLINE}, { 0xa398, 1, RI_ALL_ONLINE},
- { 0xa39c, 7, RI_E1H_ONLINE}, { 0xa3c0, 3, RI_E1H_ONLINE},
- { 0xa3d0, 1, RI_E1H_ONLINE}, { 0xa3d8, 1, RI_E1H_ONLINE},
- { 0xa3e0, 1, RI_E1H_ONLINE}, { 0xa3e8, 1, RI_E1H_ONLINE},
- { 0xa3f0, 1, RI_E1H_ONLINE}, { 0xa3f8, 1, RI_E1H_ONLINE},
- { 0xa400, 69, RI_ALL_ONLINE}, { 0xa518, 1, RI_ALL_ONLINE},
- { 0xa520, 1, RI_ALL_ONLINE}, { 0xa528, 1, RI_ALL_ONLINE},
- { 0xa530, 1, RI_ALL_ONLINE}, { 0xa538, 1, RI_ALL_ONLINE},
- { 0xa540, 1, RI_ALL_ONLINE}, { 0xa548, 1, RI_ALL_ONLINE},
- { 0xa550, 1, RI_ALL_ONLINE}, { 0xa558, 1, RI_ALL_ONLINE},
- { 0xa560, 1, RI_ALL_ONLINE}, { 0xa568, 1, RI_ALL_ONLINE},
- { 0xa570, 1, RI_ALL_ONLINE}, { 0xa580, 1, RI_ALL_ONLINE},
- { 0xa590, 1, RI_ALL_ONLINE}, { 0xa5a0, 1, RI_ALL_ONLINE},
- { 0xa5c0, 1, RI_ALL_ONLINE}, { 0xa5e0, 1, RI_E1H_ONLINE},
- { 0xa5e8, 1, RI_E1H_ONLINE}, { 0xa5f0, 1, RI_E1H_ONLINE},
- { 0xa5f8, 10, RI_E1H_ONLINE}, { 0x10000, 236, RI_ALL_ONLINE},
- { 0x103bc, 1, RI_ALL_ONLINE}, { 0x103cc, 1, RI_ALL_ONLINE},
- { 0x103dc, 1, RI_ALL_ONLINE}, { 0x10400, 57, RI_ALL_ONLINE},
- { 0x104e8, 2, RI_ALL_ONLINE}, { 0x104f4, 2, RI_ALL_ONLINE},
- { 0x10500, 146, RI_ALL_ONLINE}, { 0x10750, 2, RI_ALL_ONLINE},
- { 0x10760, 2, RI_ALL_ONLINE}, { 0x10770, 2, RI_ALL_ONLINE},
- { 0x10780, 2, RI_ALL_ONLINE}, { 0x10790, 2, RI_ALL_ONLINE},
- { 0x107a0, 2, RI_ALL_ONLINE}, { 0x107b0, 2, RI_ALL_ONLINE},
- { 0x107c0, 2, RI_ALL_ONLINE}, { 0x107d0, 2, RI_ALL_ONLINE},
- { 0x107e0, 2, RI_ALL_ONLINE}, { 0x10880, 2, RI_ALL_ONLINE},
- { 0x10900, 2, RI_ALL_ONLINE}, { 0x12000, 1, RI_ALL_ONLINE},
- { 0x14000, 1, RI_ALL_ONLINE}, { 0x16000, 26, RI_E1H_ONLINE},
- { 0x16070, 18, RI_E1H_ONLINE}, { 0x160c0, 27, RI_E1H_ONLINE},
- { 0x16140, 1, RI_E1H_ONLINE}, { 0x16160, 1, RI_E1H_ONLINE},
- { 0x16180, 2, RI_E1H_ONLINE}, { 0x161c0, 2, RI_E1H_ONLINE},
- { 0x16204, 5, RI_E1H_ONLINE}, { 0x18000, 1, RI_E1H_ONLINE},
- { 0x18008, 1, RI_E1H_ONLINE}, { 0x20000, 24, RI_ALL_ONLINE},
- { 0x20060, 8, RI_ALL_ONLINE}, { 0x20080, 138, RI_ALL_ONLINE},
- { 0x202b4, 1, RI_ALL_ONLINE}, { 0x202c4, 1, RI_ALL_ONLINE},
- { 0x20400, 2, RI_ALL_ONLINE}, { 0x2040c, 8, RI_ALL_ONLINE},
- { 0x2042c, 18, RI_E1H_ONLINE}, { 0x20480, 1, RI_ALL_ONLINE},
- { 0x20500, 1, RI_ALL_ONLINE}, { 0x20600, 1, RI_ALL_ONLINE},
- { 0x28000, 1, RI_ALL_ONLINE}, { 0x28004, 8191, RI_ALL_OFFLINE},
- { 0x30000, 1, RI_ALL_ONLINE}, { 0x30004, 16383, RI_ALL_OFFLINE},
- { 0x40000, 98, RI_ALL_ONLINE}, { 0x40194, 1, RI_ALL_ONLINE},
- { 0x401a4, 1, RI_ALL_ONLINE}, { 0x401a8, 11, RI_E1H_ONLINE},
- { 0x40200, 4, RI_ALL_ONLINE}, { 0x40400, 43, RI_ALL_ONLINE},
- { 0x404b8, 1, RI_ALL_ONLINE}, { 0x404c8, 1, RI_ALL_ONLINE},
- { 0x404cc, 3, RI_E1H_ONLINE}, { 0x40500, 2, RI_ALL_ONLINE},
- { 0x40510, 2, RI_ALL_ONLINE}, { 0x40520, 2, RI_ALL_ONLINE},
- { 0x40530, 2, RI_ALL_ONLINE}, { 0x40540, 2, RI_ALL_ONLINE},
- { 0x42000, 164, RI_ALL_ONLINE}, { 0x4229c, 1, RI_ALL_ONLINE},
- { 0x422ac, 1, RI_ALL_ONLINE}, { 0x422bc, 1, RI_ALL_ONLINE},
- { 0x422d4, 5, RI_E1H_ONLINE}, { 0x42400, 49, RI_ALL_ONLINE},
- { 0x424c8, 38, RI_ALL_ONLINE}, { 0x42568, 2, RI_ALL_ONLINE},
- { 0x42800, 1, RI_ALL_ONLINE}, { 0x50000, 20, RI_ALL_ONLINE},
- { 0x50050, 8, RI_ALL_ONLINE}, { 0x50070, 88, RI_ALL_ONLINE},
- { 0x501dc, 1, RI_ALL_ONLINE}, { 0x501ec, 1, RI_ALL_ONLINE},
- { 0x501f0, 4, RI_E1H_ONLINE}, { 0x50200, 2, RI_ALL_ONLINE},
- { 0x5020c, 7, RI_ALL_ONLINE}, { 0x50228, 6, RI_E1H_ONLINE},
- { 0x50240, 1, RI_ALL_ONLINE}, { 0x50280, 1, RI_ALL_ONLINE},
- { 0x52000, 1, RI_ALL_ONLINE}, { 0x54000, 1, RI_ALL_ONLINE},
- { 0x54004, 3327, RI_ALL_OFFLINE}, { 0x58000, 1, RI_ALL_ONLINE},
- { 0x58004, 8191, RI_ALL_OFFLINE}, { 0x60000, 71, RI_ALL_ONLINE},
- { 0x60128, 1, RI_ALL_ONLINE}, { 0x60138, 1, RI_ALL_ONLINE},
- { 0x6013c, 24, RI_E1H_ONLINE}, { 0x60200, 1, RI_ALL_ONLINE},
- { 0x61000, 1, RI_ALL_ONLINE}, { 0x61004, 511, RI_ALL_OFFLINE},
- { 0x70000, 8, RI_ALL_ONLINE}, { 0x70020, 21496, RI_ALL_OFFLINE},
- { 0x85000, 3, RI_ALL_ONLINE}, { 0x8500c, 4, RI_ALL_OFFLINE},
- { 0x8501c, 7, RI_ALL_ONLINE}, { 0x85038, 4, RI_ALL_OFFLINE},
- { 0x85048, 1, RI_ALL_ONLINE}, { 0x8504c, 109, RI_ALL_OFFLINE},
- { 0x85200, 32, RI_ALL_ONLINE}, { 0x85280, 11104, RI_ALL_OFFLINE},
- { 0xa0000, 16384, RI_ALL_ONLINE}, { 0xb0000, 16384, RI_E1H_ONLINE},
- { 0xc1000, 7, RI_ALL_ONLINE}, { 0xc1028, 1, RI_ALL_ONLINE},
- { 0xc1038, 1, RI_ALL_ONLINE}, { 0xc1800, 2, RI_ALL_ONLINE},
- { 0xc2000, 164, RI_ALL_ONLINE}, { 0xc229c, 1, RI_ALL_ONLINE},
- { 0xc22ac, 1, RI_ALL_ONLINE}, { 0xc22bc, 1, RI_ALL_ONLINE},
- { 0xc2400, 49, RI_ALL_ONLINE}, { 0xc24c8, 38, RI_ALL_ONLINE},
- { 0xc2568, 2, RI_ALL_ONLINE}, { 0xc2600, 1, RI_ALL_ONLINE},
- { 0xc4000, 165, RI_ALL_ONLINE}, { 0xc42a0, 1, RI_ALL_ONLINE},
- { 0xc42b0, 1, RI_ALL_ONLINE}, { 0xc42c0, 1, RI_ALL_ONLINE},
- { 0xc42e0, 7, RI_E1H_ONLINE}, { 0xc4400, 51, RI_ALL_ONLINE},
- { 0xc44d0, 38, RI_ALL_ONLINE}, { 0xc4570, 2, RI_ALL_ONLINE},
- { 0xc4600, 1, RI_ALL_ONLINE}, { 0xd0000, 19, RI_ALL_ONLINE},
- { 0xd004c, 8, RI_ALL_ONLINE}, { 0xd006c, 91, RI_ALL_ONLINE},
- { 0xd01e4, 1, RI_ALL_ONLINE}, { 0xd01f4, 1, RI_ALL_ONLINE},
- { 0xd0200, 2, RI_ALL_ONLINE}, { 0xd020c, 7, RI_ALL_ONLINE},
- { 0xd0228, 18, RI_E1H_ONLINE}, { 0xd0280, 1, RI_ALL_ONLINE},
- { 0xd0300, 1, RI_ALL_ONLINE}, { 0xd0400, 1, RI_ALL_ONLINE},
- { 0xd4000, 1, RI_ALL_ONLINE}, { 0xd4004, 2559, RI_ALL_OFFLINE},
- { 0xd8000, 1, RI_ALL_ONLINE}, { 0xd8004, 8191, RI_ALL_OFFLINE},
- { 0xe0000, 21, RI_ALL_ONLINE}, { 0xe0054, 8, RI_ALL_ONLINE},
- { 0xe0074, 85, RI_ALL_ONLINE}, { 0xe01d4, 1, RI_ALL_ONLINE},
- { 0xe01e4, 1, RI_ALL_ONLINE}, { 0xe0200, 2, RI_ALL_ONLINE},
- { 0xe020c, 8, RI_ALL_ONLINE}, { 0xe022c, 18, RI_E1H_ONLINE},
- { 0xe0280, 1, RI_ALL_ONLINE}, { 0xe0300, 1, RI_ALL_ONLINE},
- { 0xe1000, 1, RI_ALL_ONLINE}, { 0xe2000, 1, RI_ALL_ONLINE},
- { 0xe2004, 2047, RI_ALL_OFFLINE}, { 0xf0000, 1, RI_ALL_ONLINE},
- { 0xf0004, 16383, RI_ALL_OFFLINE}, { 0x101000, 12, RI_ALL_ONLINE},
- { 0x10103c, 1, RI_ALL_ONLINE}, { 0x10104c, 1, RI_ALL_ONLINE},
- { 0x101050, 1, RI_E1H_ONLINE}, { 0x101100, 1, RI_ALL_ONLINE},
- { 0x101800, 8, RI_ALL_ONLINE}, { 0x102000, 18, RI_ALL_ONLINE},
- { 0x102054, 1, RI_ALL_ONLINE}, { 0x102064, 1, RI_ALL_ONLINE},
- { 0x102080, 17, RI_ALL_ONLINE}, { 0x1020c8, 8, RI_E1H_ONLINE},
- { 0x102400, 1, RI_ALL_ONLINE}, { 0x103000, 26, RI_ALL_ONLINE},
- { 0x103074, 1, RI_ALL_ONLINE}, { 0x103084, 1, RI_ALL_ONLINE},
- { 0x103094, 1, RI_ALL_ONLINE}, { 0x103098, 5, RI_E1H_ONLINE},
- { 0x103800, 8, RI_ALL_ONLINE}, { 0x104000, 63, RI_ALL_ONLINE},
- { 0x104108, 1, RI_ALL_ONLINE}, { 0x104118, 1, RI_ALL_ONLINE},
- { 0x104200, 17, RI_ALL_ONLINE}, { 0x104400, 64, RI_ALL_ONLINE},
- { 0x104500, 192, RI_ALL_OFFLINE}, { 0x104800, 64, RI_ALL_ONLINE},
- { 0x104900, 192, RI_ALL_OFFLINE}, { 0x105000, 7, RI_ALL_ONLINE},
- { 0x10501c, 1, RI_ALL_OFFLINE}, { 0x105020, 3, RI_ALL_ONLINE},
- { 0x10502c, 1, RI_ALL_OFFLINE}, { 0x105030, 3, RI_ALL_ONLINE},
- { 0x10503c, 1, RI_ALL_OFFLINE}, { 0x105040, 3, RI_ALL_ONLINE},
- { 0x10504c, 1, RI_ALL_OFFLINE}, { 0x105050, 3, RI_ALL_ONLINE},
- { 0x10505c, 1, RI_ALL_OFFLINE}, { 0x105060, 3, RI_ALL_ONLINE},
- { 0x10506c, 1, RI_ALL_OFFLINE}, { 0x105070, 3, RI_ALL_ONLINE},
- { 0x10507c, 1, RI_ALL_OFFLINE}, { 0x105080, 3, RI_ALL_ONLINE},
- { 0x10508c, 1, RI_ALL_OFFLINE}, { 0x105090, 3, RI_ALL_ONLINE},
- { 0x10509c, 1, RI_ALL_OFFLINE}, { 0x1050a0, 3, RI_ALL_ONLINE},
- { 0x1050ac, 1, RI_ALL_OFFLINE}, { 0x1050b0, 3, RI_ALL_ONLINE},
- { 0x1050bc, 1, RI_ALL_OFFLINE}, { 0x1050c0, 3, RI_ALL_ONLINE},
- { 0x1050cc, 1, RI_ALL_OFFLINE}, { 0x1050d0, 3, RI_ALL_ONLINE},
- { 0x1050dc, 1, RI_ALL_OFFLINE}, { 0x1050e0, 3, RI_ALL_ONLINE},
- { 0x1050ec, 1, RI_ALL_OFFLINE}, { 0x1050f0, 3, RI_ALL_ONLINE},
- { 0x1050fc, 1, RI_ALL_OFFLINE}, { 0x105100, 3, RI_ALL_ONLINE},
- { 0x10510c, 1, RI_ALL_OFFLINE}, { 0x105110, 3, RI_ALL_ONLINE},
- { 0x10511c, 1, RI_ALL_OFFLINE}, { 0x105120, 3, RI_ALL_ONLINE},
- { 0x10512c, 1, RI_ALL_OFFLINE}, { 0x105130, 3, RI_ALL_ONLINE},
- { 0x10513c, 1, RI_ALL_OFFLINE}, { 0x105140, 3, RI_ALL_ONLINE},
- { 0x10514c, 1, RI_ALL_OFFLINE}, { 0x105150, 3, RI_ALL_ONLINE},
- { 0x10515c, 1, RI_ALL_OFFLINE}, { 0x105160, 3, RI_ALL_ONLINE},
- { 0x10516c, 1, RI_ALL_OFFLINE}, { 0x105170, 3, RI_ALL_ONLINE},
- { 0x10517c, 1, RI_ALL_OFFLINE}, { 0x105180, 3, RI_ALL_ONLINE},
- { 0x10518c, 1, RI_ALL_OFFLINE}, { 0x105190, 3, RI_ALL_ONLINE},
- { 0x10519c, 1, RI_ALL_OFFLINE}, { 0x1051a0, 3, RI_ALL_ONLINE},
- { 0x1051ac, 1, RI_ALL_OFFLINE}, { 0x1051b0, 3, RI_ALL_ONLINE},
- { 0x1051bc, 1, RI_ALL_OFFLINE}, { 0x1051c0, 3, RI_ALL_ONLINE},
- { 0x1051cc, 1, RI_ALL_OFFLINE}, { 0x1051d0, 3, RI_ALL_ONLINE},
- { 0x1051dc, 1, RI_ALL_OFFLINE}, { 0x1051e0, 3, RI_ALL_ONLINE},
- { 0x1051ec, 1, RI_ALL_OFFLINE}, { 0x1051f0, 3, RI_ALL_ONLINE},
- { 0x1051fc, 1, RI_ALL_OFFLINE}, { 0x105200, 3, RI_ALL_ONLINE},
- { 0x10520c, 1, RI_ALL_OFFLINE}, { 0x105210, 3, RI_ALL_ONLINE},
- { 0x10521c, 1, RI_ALL_OFFLINE}, { 0x105220, 3, RI_ALL_ONLINE},
- { 0x10522c, 1, RI_ALL_OFFLINE}, { 0x105230, 3, RI_ALL_ONLINE},
- { 0x10523c, 1, RI_ALL_OFFLINE}, { 0x105240, 3, RI_ALL_ONLINE},
- { 0x10524c, 1, RI_ALL_OFFLINE}, { 0x105250, 3, RI_ALL_ONLINE},
- { 0x10525c, 1, RI_ALL_OFFLINE}, { 0x105260, 3, RI_ALL_ONLINE},
- { 0x10526c, 1, RI_ALL_OFFLINE}, { 0x105270, 3, RI_ALL_ONLINE},
- { 0x10527c, 1, RI_ALL_OFFLINE}, { 0x105280, 3, RI_ALL_ONLINE},
- { 0x10528c, 1, RI_ALL_OFFLINE}, { 0x105290, 3, RI_ALL_ONLINE},
- { 0x10529c, 1, RI_ALL_OFFLINE}, { 0x1052a0, 3, RI_ALL_ONLINE},
- { 0x1052ac, 1, RI_ALL_OFFLINE}, { 0x1052b0, 3, RI_ALL_ONLINE},
- { 0x1052bc, 1, RI_ALL_OFFLINE}, { 0x1052c0, 3, RI_ALL_ONLINE},
- { 0x1052cc, 1, RI_ALL_OFFLINE}, { 0x1052d0, 3, RI_ALL_ONLINE},
- { 0x1052dc, 1, RI_ALL_OFFLINE}, { 0x1052e0, 3, RI_ALL_ONLINE},
- { 0x1052ec, 1, RI_ALL_OFFLINE}, { 0x1052f0, 3, RI_ALL_ONLINE},
- { 0x1052fc, 1, RI_ALL_OFFLINE}, { 0x105300, 3, RI_ALL_ONLINE},
- { 0x10530c, 1, RI_ALL_OFFLINE}, { 0x105310, 3, RI_ALL_ONLINE},
- { 0x10531c, 1, RI_ALL_OFFLINE}, { 0x105320, 3, RI_ALL_ONLINE},
- { 0x10532c, 1, RI_ALL_OFFLINE}, { 0x105330, 3, RI_ALL_ONLINE},
- { 0x10533c, 1, RI_ALL_OFFLINE}, { 0x105340, 3, RI_ALL_ONLINE},
- { 0x10534c, 1, RI_ALL_OFFLINE}, { 0x105350, 3, RI_ALL_ONLINE},
- { 0x10535c, 1, RI_ALL_OFFLINE}, { 0x105360, 3, RI_ALL_ONLINE},
- { 0x10536c, 1, RI_ALL_OFFLINE}, { 0x105370, 3, RI_ALL_ONLINE},
- { 0x10537c, 1, RI_ALL_OFFLINE}, { 0x105380, 3, RI_ALL_ONLINE},
- { 0x10538c, 1, RI_ALL_OFFLINE}, { 0x105390, 3, RI_ALL_ONLINE},
- { 0x10539c, 1, RI_ALL_OFFLINE}, { 0x1053a0, 3, RI_ALL_ONLINE},
- { 0x1053ac, 1, RI_ALL_OFFLINE}, { 0x1053b0, 3, RI_ALL_ONLINE},
- { 0x1053bc, 1, RI_ALL_OFFLINE}, { 0x1053c0, 3, RI_ALL_ONLINE},
- { 0x1053cc, 1, RI_ALL_OFFLINE}, { 0x1053d0, 3, RI_ALL_ONLINE},
- { 0x1053dc, 1, RI_ALL_OFFLINE}, { 0x1053e0, 3, RI_ALL_ONLINE},
- { 0x1053ec, 1, RI_ALL_OFFLINE}, { 0x1053f0, 3, RI_ALL_ONLINE},
- { 0x1053fc, 769, RI_ALL_OFFLINE}, { 0x108000, 33, RI_ALL_ONLINE},
- { 0x108090, 1, RI_ALL_ONLINE}, { 0x1080a0, 1, RI_ALL_ONLINE},
- { 0x1080ac, 5, RI_E1H_ONLINE}, { 0x108100, 5, RI_ALL_ONLINE},
- { 0x108120, 5, RI_ALL_ONLINE}, { 0x108200, 74, RI_ALL_ONLINE},
- { 0x108400, 74, RI_ALL_ONLINE}, { 0x108800, 152, RI_ALL_ONLINE},
- { 0x109000, 1, RI_ALL_ONLINE}, { 0x120000, 347, RI_ALL_ONLINE},
- { 0x120578, 1, RI_ALL_ONLINE}, { 0x120588, 1, RI_ALL_ONLINE},
- { 0x120598, 1, RI_ALL_ONLINE}, { 0x12059c, 23, RI_E1H_ONLINE},
- { 0x120614, 1, RI_E1H_ONLINE}, { 0x12061c, 30, RI_E1H_ONLINE},
- { 0x12080c, 65, RI_ALL_ONLINE}, { 0x120a00, 2, RI_ALL_ONLINE},
- { 0x122000, 2, RI_ALL_ONLINE}, { 0x128000, 2, RI_E1H_ONLINE},
- { 0x140000, 114, RI_ALL_ONLINE}, { 0x1401d4, 1, RI_ALL_ONLINE},
- { 0x1401e4, 1, RI_ALL_ONLINE}, { 0x140200, 6, RI_ALL_ONLINE},
- { 0x144000, 4, RI_ALL_ONLINE}, { 0x148000, 4, RI_ALL_ONLINE},
- { 0x14c000, 4, RI_ALL_ONLINE}, { 0x150000, 4, RI_ALL_ONLINE},
- { 0x154000, 4, RI_ALL_ONLINE}, { 0x158000, 4, RI_ALL_ONLINE},
- { 0x15c000, 7, RI_E1H_ONLINE}, { 0x161000, 7, RI_ALL_ONLINE},
- { 0x161028, 1, RI_ALL_ONLINE}, { 0x161038, 1, RI_ALL_ONLINE},
- { 0x161800, 2, RI_ALL_ONLINE}, { 0x164000, 60, RI_ALL_ONLINE},
- { 0x1640fc, 1, RI_ALL_ONLINE}, { 0x16410c, 1, RI_ALL_ONLINE},
- { 0x164110, 2, RI_E1H_ONLINE}, { 0x164200, 1, RI_ALL_ONLINE},
- { 0x164208, 1, RI_ALL_ONLINE}, { 0x164210, 1, RI_ALL_ONLINE},
- { 0x164218, 1, RI_ALL_ONLINE}, { 0x164220, 1, RI_ALL_ONLINE},
- { 0x164228, 1, RI_ALL_ONLINE}, { 0x164230, 1, RI_ALL_ONLINE},
- { 0x164238, 1, RI_ALL_ONLINE}, { 0x164240, 1, RI_ALL_ONLINE},
- { 0x164248, 1, RI_ALL_ONLINE}, { 0x164250, 1, RI_ALL_ONLINE},
- { 0x164258, 1, RI_ALL_ONLINE}, { 0x164260, 1, RI_ALL_ONLINE},
- { 0x164270, 2, RI_ALL_ONLINE}, { 0x164280, 2, RI_ALL_ONLINE},
- { 0x164800, 2, RI_ALL_ONLINE}, { 0x165000, 2, RI_ALL_ONLINE},
- { 0x166000, 164, RI_ALL_ONLINE}, { 0x16629c, 1, RI_ALL_ONLINE},
- { 0x1662ac, 1, RI_ALL_ONLINE}, { 0x1662bc, 1, RI_ALL_ONLINE},
- { 0x166400, 49, RI_ALL_ONLINE}, { 0x1664c8, 38, RI_ALL_ONLINE},
- { 0x166568, 2, RI_ALL_ONLINE}, { 0x166800, 1, RI_ALL_ONLINE},
- { 0x168000, 270, RI_ALL_ONLINE}, { 0x168444, 1, RI_ALL_ONLINE},
- { 0x168454, 1, RI_ALL_ONLINE}, { 0x168800, 19, RI_ALL_ONLINE},
- { 0x168900, 1, RI_ALL_ONLINE}, { 0x168a00, 128, RI_ALL_ONLINE},
- { 0x16a000, 1, RI_ALL_ONLINE}, { 0x16a004, 1535, RI_ALL_OFFLINE},
- { 0x16c000, 1, RI_ALL_ONLINE}, { 0x16c004, 1535, RI_ALL_OFFLINE},
- { 0x16e000, 16, RI_E1H_ONLINE}, { 0x16e100, 1, RI_E1H_ONLINE},
- { 0x16e200, 2, RI_E1H_ONLINE}, { 0x16e400, 183, RI_E1H_ONLINE},
- { 0x170000, 93, RI_ALL_ONLINE}, { 0x170180, 1, RI_ALL_ONLINE},
- { 0x170190, 1, RI_ALL_ONLINE}, { 0x170200, 4, RI_ALL_ONLINE},
- { 0x170214, 1, RI_ALL_ONLINE}, { 0x178000, 1, RI_ALL_ONLINE},
- { 0x180000, 61, RI_ALL_ONLINE}, { 0x180100, 1, RI_ALL_ONLINE},
- { 0x180110, 1, RI_ALL_ONLINE}, { 0x180120, 1, RI_ALL_ONLINE},
- { 0x180130, 1, RI_ALL_ONLINE}, { 0x18013c, 2, RI_E1H_ONLINE},
- { 0x180200, 58, RI_ALL_ONLINE}, { 0x180340, 4, RI_ALL_ONLINE},
- { 0x180400, 1, RI_ALL_ONLINE}, { 0x180404, 255, RI_ALL_OFFLINE},
- { 0x181000, 4, RI_ALL_ONLINE}, { 0x181010, 1020, RI_ALL_OFFLINE},
- { 0x1a0000, 1, RI_ALL_ONLINE}, { 0x1a0004, 1023, RI_ALL_OFFLINE},
- { 0x1a1000, 1, RI_ALL_ONLINE}, { 0x1a1004, 4607, RI_ALL_OFFLINE},
- { 0x1a5800, 2560, RI_E1H_OFFLINE}, { 0x1a8000, 64, RI_ALL_OFFLINE},
- { 0x1a8100, 1984, RI_E1H_OFFLINE}, { 0x1aa000, 1, RI_E1H_ONLINE},
- { 0x1aa004, 6655, RI_E1H_OFFLINE}, { 0x1b1800, 128, RI_ALL_OFFLINE},
- { 0x1b1c00, 128, RI_ALL_OFFLINE}, { 0x1b2000, 1, RI_ALL_OFFLINE},
- { 0x1b2400, 64, RI_E1H_OFFLINE}, { 0x1b8200, 1, RI_ALL_ONLINE},
- { 0x1b8240, 1, RI_ALL_ONLINE}, { 0x1b8280, 1, RI_ALL_ONLINE},
- { 0x1b82c0, 1, RI_ALL_ONLINE}, { 0x1b8a00, 1, RI_ALL_ONLINE},
- { 0x1b8a80, 1, RI_ALL_ONLINE}, { 0x1c0000, 2, RI_ALL_ONLINE},
- { 0x200000, 65, RI_ALL_ONLINE}, { 0x200110, 1, RI_ALL_ONLINE},
- { 0x200120, 1, RI_ALL_ONLINE}, { 0x200130, 1, RI_ALL_ONLINE},
- { 0x200140, 1, RI_ALL_ONLINE}, { 0x20014c, 2, RI_E1H_ONLINE},
- { 0x200200, 58, RI_ALL_ONLINE}, { 0x200340, 4, RI_ALL_ONLINE},
- { 0x200400, 1, RI_ALL_ONLINE}, { 0x200404, 255, RI_ALL_OFFLINE},
- { 0x202000, 4, RI_ALL_ONLINE}, { 0x202010, 2044, RI_ALL_OFFLINE},
- { 0x220000, 1, RI_ALL_ONLINE}, { 0x220004, 1023, RI_ALL_OFFLINE},
- { 0x221000, 1, RI_ALL_ONLINE}, { 0x221004, 4607, RI_ALL_OFFLINE},
- { 0x225800, 1536, RI_E1H_OFFLINE}, { 0x227000, 1, RI_E1H_ONLINE},
- { 0x227004, 1023, RI_E1H_OFFLINE}, { 0x228000, 64, RI_ALL_OFFLINE},
- { 0x228100, 8640, RI_E1H_OFFLINE}, { 0x231800, 128, RI_ALL_OFFLINE},
- { 0x231c00, 128, RI_ALL_OFFLINE}, { 0x232000, 1, RI_ALL_OFFLINE},
- { 0x232400, 64, RI_E1H_OFFLINE}, { 0x238200, 1, RI_ALL_ONLINE},
- { 0x238240, 1, RI_ALL_ONLINE}, { 0x238280, 1, RI_ALL_ONLINE},
- { 0x2382c0, 1, RI_ALL_ONLINE}, { 0x238a00, 1, RI_ALL_ONLINE},
- { 0x238a80, 1, RI_ALL_ONLINE}, { 0x240000, 2, RI_ALL_ONLINE},
- { 0x280000, 65, RI_ALL_ONLINE}, { 0x280110, 1, RI_ALL_ONLINE},
- { 0x280120, 1, RI_ALL_ONLINE}, { 0x280130, 1, RI_ALL_ONLINE},
- { 0x280140, 1, RI_ALL_ONLINE}, { 0x28014c, 2, RI_E1H_ONLINE},
- { 0x280200, 58, RI_ALL_ONLINE}, { 0x280340, 4, RI_ALL_ONLINE},
- { 0x280400, 1, RI_ALL_ONLINE}, { 0x280404, 255, RI_ALL_OFFLINE},
- { 0x282000, 4, RI_ALL_ONLINE}, { 0x282010, 2044, RI_ALL_OFFLINE},
- { 0x2a0000, 1, RI_ALL_ONLINE}, { 0x2a0004, 1023, RI_ALL_OFFLINE},
- { 0x2a1000, 1, RI_ALL_ONLINE}, { 0x2a1004, 4607, RI_ALL_OFFLINE},
- { 0x2a5800, 2560, RI_E1H_OFFLINE}, { 0x2a8000, 64, RI_ALL_OFFLINE},
- { 0x2a8100, 960, RI_E1H_OFFLINE}, { 0x2a9000, 1, RI_E1H_ONLINE},
- { 0x2a9004, 7679, RI_E1H_OFFLINE}, { 0x2b1800, 128, RI_ALL_OFFLINE},
- { 0x2b1c00, 128, RI_ALL_OFFLINE}, { 0x2b2000, 1, RI_ALL_OFFLINE},
- { 0x2b2400, 64, RI_E1H_OFFLINE}, { 0x2b8200, 1, RI_ALL_ONLINE},
- { 0x2b8240, 1, RI_ALL_ONLINE}, { 0x2b8280, 1, RI_ALL_ONLINE},
- { 0x2b82c0, 1, RI_ALL_ONLINE}, { 0x2b8a00, 1, RI_ALL_ONLINE},
- { 0x2b8a80, 1, RI_ALL_ONLINE}, { 0x2c0000, 2, RI_ALL_ONLINE},
- { 0x300000, 65, RI_ALL_ONLINE}, { 0x300110, 1, RI_ALL_ONLINE},
- { 0x300120, 1, RI_ALL_ONLINE}, { 0x300130, 1, RI_ALL_ONLINE},
- { 0x300140, 1, RI_ALL_ONLINE}, { 0x30014c, 2, RI_E1H_ONLINE},
- { 0x300200, 58, RI_ALL_ONLINE}, { 0x300340, 4, RI_ALL_ONLINE},
- { 0x300400, 1, RI_ALL_ONLINE}, { 0x300404, 255, RI_ALL_OFFLINE},
- { 0x302000, 4, RI_ALL_ONLINE}, { 0x302010, 2044, RI_ALL_OFFLINE},
- { 0x320000, 1, RI_ALL_ONLINE}, { 0x320004, 1023, RI_ALL_OFFLINE},
- { 0x321000, 1, RI_ALL_ONLINE}, { 0x321004, 4607, RI_ALL_OFFLINE},
- { 0x325800, 2560, RI_E1H_OFFLINE}, { 0x328000, 64, RI_ALL_OFFLINE},
- { 0x328100, 536, RI_E1H_OFFLINE}, { 0x328960, 1, RI_E1H_ONLINE},
- { 0x328964, 8103, RI_E1H_OFFLINE}, { 0x331800, 128, RI_ALL_OFFLINE},
- { 0x331c00, 128, RI_ALL_OFFLINE}, { 0x332000, 1, RI_ALL_OFFLINE},
- { 0x332400, 64, RI_E1H_OFFLINE}, { 0x338200, 1, RI_ALL_ONLINE},
- { 0x338240, 1, RI_ALL_ONLINE}, { 0x338280, 1, RI_ALL_ONLINE},
- { 0x3382c0, 1, RI_ALL_ONLINE}, { 0x338a00, 1, RI_ALL_ONLINE},
- { 0x338a80, 1, RI_ALL_ONLINE}, { 0x340000, 2, RI_ALL_ONLINE}
+ { 0x2000, 341, RI_ALL_ONLINE }, { 0x2800, 103, RI_ALL_ONLINE },
+ { 0x3000, 287, RI_ALL_ONLINE }, { 0x3800, 331, RI_ALL_ONLINE },
+ { 0x8800, 6, RI_E1_ONLINE }, { 0xa000, 223, RI_ALL_ONLINE },
+ { 0xa388, 1, RI_ALL_ONLINE }, { 0xa398, 1, RI_ALL_ONLINE },
+ { 0xa39c, 7, RI_E1H_ONLINE }, { 0xa3c0, 3, RI_E1H_ONLINE },
+ { 0xa3d0, 1, RI_E1H_ONLINE }, { 0xa3d8, 1, RI_E1H_ONLINE },
+ { 0xa3e0, 1, RI_E1H_ONLINE }, { 0xa3e8, 1, RI_E1H_ONLINE },
+ { 0xa3f0, 1, RI_E1H_ONLINE }, { 0xa3f8, 1, RI_E1H_ONLINE },
+ { 0xa400, 69, RI_ALL_ONLINE }, { 0xa518, 1, RI_ALL_ONLINE },
+ { 0xa520, 1, RI_ALL_ONLINE }, { 0xa528, 1, RI_ALL_ONLINE },
+ { 0xa530, 1, RI_ALL_ONLINE }, { 0xa538, 1, RI_ALL_ONLINE },
+ { 0xa540, 1, RI_ALL_ONLINE }, { 0xa548, 1, RI_ALL_ONLINE },
+ { 0xa550, 1, RI_ALL_ONLINE }, { 0xa558, 1, RI_ALL_ONLINE },
+ { 0xa560, 1, RI_ALL_ONLINE }, { 0xa568, 1, RI_ALL_ONLINE },
+ { 0xa570, 1, RI_ALL_ONLINE }, { 0xa580, 1, RI_ALL_ONLINE },
+ { 0xa590, 1, RI_ALL_ONLINE }, { 0xa5a0, 1, RI_ALL_ONLINE },
+ { 0xa5c0, 1, RI_ALL_ONLINE }, { 0xa5e0, 1, RI_E1H_ONLINE },
+ { 0xa5e8, 1, RI_E1H_ONLINE }, { 0xa5f0, 1, RI_E1H_ONLINE },
+ { 0xa5f8, 10, RI_E1H_ONLINE }, { 0x10000, 236, RI_ALL_ONLINE },
+ { 0x103bc, 1, RI_ALL_ONLINE }, { 0x103cc, 1, RI_ALL_ONLINE },
+ { 0x103dc, 1, RI_ALL_ONLINE }, { 0x10400, 57, RI_ALL_ONLINE },
+ { 0x104e8, 2, RI_ALL_ONLINE }, { 0x104f4, 2, RI_ALL_ONLINE },
+ { 0x10500, 146, RI_ALL_ONLINE }, { 0x10750, 2, RI_ALL_ONLINE },
+ { 0x10760, 2, RI_ALL_ONLINE }, { 0x10770, 2, RI_ALL_ONLINE },
+ { 0x10780, 2, RI_ALL_ONLINE }, { 0x10790, 2, RI_ALL_ONLINE },
+ { 0x107a0, 2, RI_ALL_ONLINE }, { 0x107b0, 2, RI_ALL_ONLINE },
+ { 0x107c0, 2, RI_ALL_ONLINE }, { 0x107d0, 2, RI_ALL_ONLINE },
+ { 0x107e0, 2, RI_ALL_ONLINE }, { 0x10880, 2, RI_ALL_ONLINE },
+ { 0x10900, 2, RI_ALL_ONLINE }, { 0x12000, 1, RI_ALL_ONLINE },
+ { 0x14000, 1, RI_ALL_ONLINE }, { 0x16000, 26, RI_E1H_ONLINE },
+ { 0x16070, 18, RI_E1H_ONLINE }, { 0x160c0, 27, RI_E1H_ONLINE },
+ { 0x16140, 1, RI_E1H_ONLINE }, { 0x16160, 1, RI_E1H_ONLINE },
+ { 0x16180, 2, RI_E1H_ONLINE }, { 0x161c0, 2, RI_E1H_ONLINE },
+ { 0x16204, 5, RI_E1H_ONLINE }, { 0x18000, 1, RI_E1H_ONLINE },
+ { 0x18008, 1, RI_E1H_ONLINE }, { 0x20000, 24, RI_ALL_ONLINE },
+ { 0x20060, 8, RI_ALL_ONLINE }, { 0x20080, 138, RI_ALL_ONLINE },
+ { 0x202b4, 1, RI_ALL_ONLINE }, { 0x202c4, 1, RI_ALL_ONLINE },
+ { 0x20400, 2, RI_ALL_ONLINE }, { 0x2040c, 8, RI_ALL_ONLINE },
+ { 0x2042c, 18, RI_E1H_ONLINE }, { 0x20480, 1, RI_ALL_ONLINE },
+ { 0x20500, 1, RI_ALL_ONLINE }, { 0x20600, 1, RI_ALL_ONLINE },
+ { 0x28000, 1, RI_ALL_ONLINE }, { 0x28004, 8191, RI_ALL_OFFLINE },
+ { 0x30000, 1, RI_ALL_ONLINE }, { 0x30004, 16383, RI_ALL_OFFLINE },
+ { 0x40000, 98, RI_ALL_ONLINE }, { 0x40194, 1, RI_ALL_ONLINE },
+ { 0x401a4, 1, RI_ALL_ONLINE }, { 0x401a8, 11, RI_E1H_ONLINE },
+ { 0x40200, 4, RI_ALL_ONLINE }, { 0x40400, 43, RI_ALL_ONLINE },
+ { 0x404b8, 1, RI_ALL_ONLINE }, { 0x404c8, 1, RI_ALL_ONLINE },
+ { 0x404cc, 3, RI_E1H_ONLINE }, { 0x40500, 2, RI_ALL_ONLINE },
+ { 0x40510, 2, RI_ALL_ONLINE }, { 0x40520, 2, RI_ALL_ONLINE },
+ { 0x40530, 2, RI_ALL_ONLINE }, { 0x40540, 2, RI_ALL_ONLINE },
+ { 0x42000, 164, RI_ALL_ONLINE }, { 0x4229c, 1, RI_ALL_ONLINE },
+ { 0x422ac, 1, RI_ALL_ONLINE }, { 0x422bc, 1, RI_ALL_ONLINE },
+ { 0x422d4, 5, RI_E1H_ONLINE }, { 0x42400, 49, RI_ALL_ONLINE },
+ { 0x424c8, 38, RI_ALL_ONLINE }, { 0x42568, 2, RI_ALL_ONLINE },
+ { 0x42800, 1, RI_ALL_ONLINE }, { 0x50000, 20, RI_ALL_ONLINE },
+ { 0x50050, 8, RI_ALL_ONLINE }, { 0x50070, 88, RI_ALL_ONLINE },
+ { 0x501dc, 1, RI_ALL_ONLINE }, { 0x501ec, 1, RI_ALL_ONLINE },
+ { 0x501f0, 4, RI_E1H_ONLINE }, { 0x50200, 2, RI_ALL_ONLINE },
+ { 0x5020c, 7, RI_ALL_ONLINE }, { 0x50228, 6, RI_E1H_ONLINE },
+ { 0x50240, 1, RI_ALL_ONLINE }, { 0x50280, 1, RI_ALL_ONLINE },
+ { 0x52000, 1, RI_ALL_ONLINE }, { 0x54000, 1, RI_ALL_ONLINE },
+ { 0x54004, 3327, RI_ALL_OFFLINE }, { 0x58000, 1, RI_ALL_ONLINE },
+ { 0x58004, 8191, RI_ALL_OFFLINE }, { 0x60000, 71, RI_ALL_ONLINE },
+ { 0x60128, 1, RI_ALL_ONLINE }, { 0x60138, 1, RI_ALL_ONLINE },
+ { 0x6013c, 24, RI_E1H_ONLINE }, { 0x60200, 1, RI_ALL_ONLINE },
+ { 0x61000, 1, RI_ALL_ONLINE }, { 0x61004, 511, RI_ALL_OFFLINE },
+ { 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 21496, RI_ALL_OFFLINE },
+ { 0x85000, 3, RI_ALL_ONLINE }, { 0x8500c, 4, RI_ALL_OFFLINE },
+ { 0x8501c, 7, RI_ALL_ONLINE }, { 0x85038, 4, RI_ALL_OFFLINE },
+ { 0x85048, 1, RI_ALL_ONLINE }, { 0x8504c, 109, RI_ALL_OFFLINE },
+ { 0x85200, 32, RI_ALL_ONLINE }, { 0x85280, 11104, RI_ALL_OFFLINE },
+ { 0xa0000, 16384, RI_ALL_ONLINE }, { 0xb0000, 16384, RI_E1H_ONLINE },
+ { 0xc1000, 7, RI_ALL_ONLINE }, { 0xc1028, 1, RI_ALL_ONLINE },
+ { 0xc1038, 1, RI_ALL_ONLINE }, { 0xc1800, 2, RI_ALL_ONLINE },
+ { 0xc2000, 164, RI_ALL_ONLINE }, { 0xc229c, 1, RI_ALL_ONLINE },
+ { 0xc22ac, 1, RI_ALL_ONLINE }, { 0xc22bc, 1, RI_ALL_ONLINE },
+ { 0xc2400, 49, RI_ALL_ONLINE }, { 0xc24c8, 38, RI_ALL_ONLINE },
+ { 0xc2568, 2, RI_ALL_ONLINE }, { 0xc2600, 1, RI_ALL_ONLINE },
+ { 0xc4000, 165, RI_ALL_ONLINE }, { 0xc42a0, 1, RI_ALL_ONLINE },
+ { 0xc42b0, 1, RI_ALL_ONLINE }, { 0xc42c0, 1, RI_ALL_ONLINE },
+ { 0xc42e0, 7, RI_E1H_ONLINE }, { 0xc4400, 51, RI_ALL_ONLINE },
+ { 0xc44d0, 38, RI_ALL_ONLINE }, { 0xc4570, 2, RI_ALL_ONLINE },
+ { 0xc4600, 1, RI_ALL_ONLINE }, { 0xd0000, 19, RI_ALL_ONLINE },
+ { 0xd004c, 8, RI_ALL_ONLINE }, { 0xd006c, 91, RI_ALL_ONLINE },
+ { 0xd01e4, 1, RI_ALL_ONLINE }, { 0xd01f4, 1, RI_ALL_ONLINE },
+ { 0xd0200, 2, RI_ALL_ONLINE }, { 0xd020c, 7, RI_ALL_ONLINE },
+ { 0xd0228, 18, RI_E1H_ONLINE }, { 0xd0280, 1, RI_ALL_ONLINE },
+ { 0xd0300, 1, RI_ALL_ONLINE }, { 0xd0400, 1, RI_ALL_ONLINE },
+ { 0xd4000, 1, RI_ALL_ONLINE }, { 0xd4004, 2559, RI_ALL_OFFLINE },
+ { 0xd8000, 1, RI_ALL_ONLINE }, { 0xd8004, 8191, RI_ALL_OFFLINE },
+ { 0xe0000, 21, RI_ALL_ONLINE }, { 0xe0054, 8, RI_ALL_ONLINE },
+ { 0xe0074, 85, RI_ALL_ONLINE }, { 0xe01d4, 1, RI_ALL_ONLINE },
+ { 0xe01e4, 1, RI_ALL_ONLINE }, { 0xe0200, 2, RI_ALL_ONLINE },
+ { 0xe020c, 8, RI_ALL_ONLINE }, { 0xe022c, 18, RI_E1H_ONLINE },
+ { 0xe0280, 1, RI_ALL_ONLINE }, { 0xe0300, 1, RI_ALL_ONLINE },
+ { 0xe1000, 1, RI_ALL_ONLINE }, { 0xe2000, 1, RI_ALL_ONLINE },
+ { 0xe2004, 2047, RI_ALL_OFFLINE }, { 0xf0000, 1, RI_ALL_ONLINE },
+ { 0xf0004, 16383, RI_ALL_OFFLINE }, { 0x101000, 12, RI_ALL_ONLINE },
+ { 0x10103c, 1, RI_ALL_ONLINE }, { 0x10104c, 1, RI_ALL_ONLINE },
+ { 0x101050, 1, RI_E1H_ONLINE }, { 0x101100, 1, RI_ALL_ONLINE },
+ { 0x101800, 8, RI_ALL_ONLINE }, { 0x102000, 18, RI_ALL_ONLINE },
+ { 0x102054, 1, RI_ALL_ONLINE }, { 0x102064, 1, RI_ALL_ONLINE },
+ { 0x102080, 17, RI_ALL_ONLINE }, { 0x1020c8, 8, RI_E1H_ONLINE },
+ { 0x102400, 1, RI_ALL_ONLINE }, { 0x103000, 26, RI_ALL_ONLINE },
+ { 0x103074, 1, RI_ALL_ONLINE }, { 0x103084, 1, RI_ALL_ONLINE },
+ { 0x103094, 1, RI_ALL_ONLINE }, { 0x103098, 5, RI_E1H_ONLINE },
+ { 0x103800, 8, RI_ALL_ONLINE }, { 0x104000, 63, RI_ALL_ONLINE },
+ { 0x104108, 1, RI_ALL_ONLINE }, { 0x104118, 1, RI_ALL_ONLINE },
+ { 0x104200, 17, RI_ALL_ONLINE }, { 0x104400, 64, RI_ALL_ONLINE },
+ { 0x104500, 192, RI_ALL_OFFLINE }, { 0x104800, 64, RI_ALL_ONLINE },
+ { 0x104900, 192, RI_ALL_OFFLINE }, { 0x105000, 7, RI_ALL_ONLINE },
+ { 0x10501c, 1, RI_ALL_OFFLINE }, { 0x105020, 3, RI_ALL_ONLINE },
+ { 0x10502c, 1, RI_ALL_OFFLINE }, { 0x105030, 3, RI_ALL_ONLINE },
+ { 0x10503c, 1, RI_ALL_OFFLINE }, { 0x105040, 3, RI_ALL_ONLINE },
+ { 0x10504c, 1, RI_ALL_OFFLINE }, { 0x105050, 3, RI_ALL_ONLINE },
+ { 0x10505c, 1, RI_ALL_OFFLINE }, { 0x105060, 3, RI_ALL_ONLINE },
+ { 0x10506c, 1, RI_ALL_OFFLINE }, { 0x105070, 3, RI_ALL_ONLINE },
+ { 0x10507c, 1, RI_ALL_OFFLINE }, { 0x105080, 3, RI_ALL_ONLINE },
+ { 0x10508c, 1, RI_ALL_OFFLINE }, { 0x105090, 3, RI_ALL_ONLINE },
+ { 0x10509c, 1, RI_ALL_OFFLINE }, { 0x1050a0, 3, RI_ALL_ONLINE },
+ { 0x1050ac, 1, RI_ALL_OFFLINE }, { 0x1050b0, 3, RI_ALL_ONLINE },
+ { 0x1050bc, 1, RI_ALL_OFFLINE }, { 0x1050c0, 3, RI_ALL_ONLINE },
+ { 0x1050cc, 1, RI_ALL_OFFLINE }, { 0x1050d0, 3, RI_ALL_ONLINE },
+ { 0x1050dc, 1, RI_ALL_OFFLINE }, { 0x1050e0, 3, RI_ALL_ONLINE },
+ { 0x1050ec, 1, RI_ALL_OFFLINE }, { 0x1050f0, 3, RI_ALL_ONLINE },
+ { 0x1050fc, 1, RI_ALL_OFFLINE }, { 0x105100, 3, RI_ALL_ONLINE },
+ { 0x10510c, 1, RI_ALL_OFFLINE }, { 0x105110, 3, RI_ALL_ONLINE },
+ { 0x10511c, 1, RI_ALL_OFFLINE }, { 0x105120, 3, RI_ALL_ONLINE },
+ { 0x10512c, 1, RI_ALL_OFFLINE }, { 0x105130, 3, RI_ALL_ONLINE },
+ { 0x10513c, 1, RI_ALL_OFFLINE }, { 0x105140, 3, RI_ALL_ONLINE },
+ { 0x10514c, 1, RI_ALL_OFFLINE }, { 0x105150, 3, RI_ALL_ONLINE },
+ { 0x10515c, 1, RI_ALL_OFFLINE }, { 0x105160, 3, RI_ALL_ONLINE },
+ { 0x10516c, 1, RI_ALL_OFFLINE }, { 0x105170, 3, RI_ALL_ONLINE },
+ { 0x10517c, 1, RI_ALL_OFFLINE }, { 0x105180, 3, RI_ALL_ONLINE },
+ { 0x10518c, 1, RI_ALL_OFFLINE }, { 0x105190, 3, RI_ALL_ONLINE },
+ { 0x10519c, 1, RI_ALL_OFFLINE }, { 0x1051a0, 3, RI_ALL_ONLINE },
+ { 0x1051ac, 1, RI_ALL_OFFLINE }, { 0x1051b0, 3, RI_ALL_ONLINE },
+ { 0x1051bc, 1, RI_ALL_OFFLINE }, { 0x1051c0, 3, RI_ALL_ONLINE },
+ { 0x1051cc, 1, RI_ALL_OFFLINE }, { 0x1051d0, 3, RI_ALL_ONLINE },
+ { 0x1051dc, 1, RI_ALL_OFFLINE }, { 0x1051e0, 3, RI_ALL_ONLINE },
+ { 0x1051ec, 1, RI_ALL_OFFLINE }, { 0x1051f0, 3, RI_ALL_ONLINE },
+ { 0x1051fc, 1, RI_ALL_OFFLINE }, { 0x105200, 3, RI_ALL_ONLINE },
+ { 0x10520c, 1, RI_ALL_OFFLINE }, { 0x105210, 3, RI_ALL_ONLINE },
+ { 0x10521c, 1, RI_ALL_OFFLINE }, { 0x105220, 3, RI_ALL_ONLINE },
+ { 0x10522c, 1, RI_ALL_OFFLINE }, { 0x105230, 3, RI_ALL_ONLINE },
+ { 0x10523c, 1, RI_ALL_OFFLINE }, { 0x105240, 3, RI_ALL_ONLINE },
+ { 0x10524c, 1, RI_ALL_OFFLINE }, { 0x105250, 3, RI_ALL_ONLINE },
+ { 0x10525c, 1, RI_ALL_OFFLINE }, { 0x105260, 3, RI_ALL_ONLINE },
+ { 0x10526c, 1, RI_ALL_OFFLINE }, { 0x105270, 3, RI_ALL_ONLINE },
+ { 0x10527c, 1, RI_ALL_OFFLINE }, { 0x105280, 3, RI_ALL_ONLINE },
+ { 0x10528c, 1, RI_ALL_OFFLINE }, { 0x105290, 3, RI_ALL_ONLINE },
+ { 0x10529c, 1, RI_ALL_OFFLINE }, { 0x1052a0, 3, RI_ALL_ONLINE },
+ { 0x1052ac, 1, RI_ALL_OFFLINE }, { 0x1052b0, 3, RI_ALL_ONLINE },
+ { 0x1052bc, 1, RI_ALL_OFFLINE }, { 0x1052c0, 3, RI_ALL_ONLINE },
+ { 0x1052cc, 1, RI_ALL_OFFLINE }, { 0x1052d0, 3, RI_ALL_ONLINE },
+ { 0x1052dc, 1, RI_ALL_OFFLINE }, { 0x1052e0, 3, RI_ALL_ONLINE },
+ { 0x1052ec, 1, RI_ALL_OFFLINE }, { 0x1052f0, 3, RI_ALL_ONLINE },
+ { 0x1052fc, 1, RI_ALL_OFFLINE }, { 0x105300, 3, RI_ALL_ONLINE },
+ { 0x10530c, 1, RI_ALL_OFFLINE }, { 0x105310, 3, RI_ALL_ONLINE },
+ { 0x10531c, 1, RI_ALL_OFFLINE }, { 0x105320, 3, RI_ALL_ONLINE },
+ { 0x10532c, 1, RI_ALL_OFFLINE }, { 0x105330, 3, RI_ALL_ONLINE },
+ { 0x10533c, 1, RI_ALL_OFFLINE }, { 0x105340, 3, RI_ALL_ONLINE },
+ { 0x10534c, 1, RI_ALL_OFFLINE }, { 0x105350, 3, RI_ALL_ONLINE },
+ { 0x10535c, 1, RI_ALL_OFFLINE }, { 0x105360, 3, RI_ALL_ONLINE },
+ { 0x10536c, 1, RI_ALL_OFFLINE }, { 0x105370, 3, RI_ALL_ONLINE },
+ { 0x10537c, 1, RI_ALL_OFFLINE }, { 0x105380, 3, RI_ALL_ONLINE },
+ { 0x10538c, 1, RI_ALL_OFFLINE }, { 0x105390, 3, RI_ALL_ONLINE },
+ { 0x10539c, 1, RI_ALL_OFFLINE }, { 0x1053a0, 3, RI_ALL_ONLINE },
+ { 0x1053ac, 1, RI_ALL_OFFLINE }, { 0x1053b0, 3, RI_ALL_ONLINE },
+ { 0x1053bc, 1, RI_ALL_OFFLINE }, { 0x1053c0, 3, RI_ALL_ONLINE },
+ { 0x1053cc, 1, RI_ALL_OFFLINE }, { 0x1053d0, 3, RI_ALL_ONLINE },
+ { 0x1053dc, 1, RI_ALL_OFFLINE }, { 0x1053e0, 3, RI_ALL_ONLINE },
+ { 0x1053ec, 1, RI_ALL_OFFLINE }, { 0x1053f0, 3, RI_ALL_ONLINE },
+ { 0x1053fc, 769, RI_ALL_OFFLINE }, { 0x108000, 33, RI_ALL_ONLINE },
+ { 0x108090, 1, RI_ALL_ONLINE }, { 0x1080a0, 1, RI_ALL_ONLINE },
+ { 0x1080ac, 5, RI_E1H_ONLINE }, { 0x108100, 5, RI_ALL_ONLINE },
+ { 0x108120, 5, RI_ALL_ONLINE }, { 0x108200, 74, RI_ALL_ONLINE },
+ { 0x108400, 74, RI_ALL_ONLINE }, { 0x108800, 152, RI_ALL_ONLINE },
+ { 0x109000, 1, RI_ALL_ONLINE }, { 0x120000, 347, RI_ALL_ONLINE },
+ { 0x120578, 1, RI_ALL_ONLINE }, { 0x120588, 1, RI_ALL_ONLINE },
+ { 0x120598, 1, RI_ALL_ONLINE }, { 0x12059c, 23, RI_E1H_ONLINE },
+ { 0x120614, 1, RI_E1H_ONLINE }, { 0x12061c, 30, RI_E1H_ONLINE },
+ { 0x12080c, 65, RI_ALL_ONLINE }, { 0x120a00, 2, RI_ALL_ONLINE },
+ { 0x122000, 2, RI_ALL_ONLINE }, { 0x128000, 2, RI_E1H_ONLINE },
+ { 0x140000, 114, RI_ALL_ONLINE }, { 0x1401d4, 1, RI_ALL_ONLINE },
+ { 0x1401e4, 1, RI_ALL_ONLINE }, { 0x140200, 6, RI_ALL_ONLINE },
+ { 0x144000, 4, RI_ALL_ONLINE }, { 0x148000, 4, RI_ALL_ONLINE },
+ { 0x14c000, 4, RI_ALL_ONLINE }, { 0x150000, 4, RI_ALL_ONLINE },
+ { 0x154000, 4, RI_ALL_ONLINE }, { 0x158000, 4, RI_ALL_ONLINE },
+ { 0x15c000, 7, RI_E1H_ONLINE }, { 0x161000, 7, RI_ALL_ONLINE },
+ { 0x161028, 1, RI_ALL_ONLINE }, { 0x161038, 1, RI_ALL_ONLINE },
+ { 0x161800, 2, RI_ALL_ONLINE }, { 0x164000, 60, RI_ALL_ONLINE },
+ { 0x1640fc, 1, RI_ALL_ONLINE }, { 0x16410c, 1, RI_ALL_ONLINE },
+ { 0x164110, 2, RI_E1H_ONLINE }, { 0x164200, 1, RI_ALL_ONLINE },
+ { 0x164208, 1, RI_ALL_ONLINE }, { 0x164210, 1, RI_ALL_ONLINE },
+ { 0x164218, 1, RI_ALL_ONLINE }, { 0x164220, 1, RI_ALL_ONLINE },
+ { 0x164228, 1, RI_ALL_ONLINE }, { 0x164230, 1, RI_ALL_ONLINE },
+ { 0x164238, 1, RI_ALL_ONLINE }, { 0x164240, 1, RI_ALL_ONLINE },
+ { 0x164248, 1, RI_ALL_ONLINE }, { 0x164250, 1, RI_ALL_ONLINE },
+ { 0x164258, 1, RI_ALL_ONLINE }, { 0x164260, 1, RI_ALL_ONLINE },
+ { 0x164270, 2, RI_ALL_ONLINE }, { 0x164280, 2, RI_ALL_ONLINE },
+ { 0x164800, 2, RI_ALL_ONLINE }, { 0x165000, 2, RI_ALL_ONLINE },
+ { 0x166000, 164, RI_ALL_ONLINE }, { 0x16629c, 1, RI_ALL_ONLINE },
+ { 0x1662ac, 1, RI_ALL_ONLINE }, { 0x1662bc, 1, RI_ALL_ONLINE },
+ { 0x166400, 49, RI_ALL_ONLINE }, { 0x1664c8, 38, RI_ALL_ONLINE },
+ { 0x166568, 2, RI_ALL_ONLINE }, { 0x166800, 1, RI_ALL_ONLINE },
+ { 0x168000, 270, RI_ALL_ONLINE }, { 0x168444, 1, RI_ALL_ONLINE },
+ { 0x168454, 1, RI_ALL_ONLINE }, { 0x168800, 19, RI_ALL_ONLINE },
+ { 0x168900, 1, RI_ALL_ONLINE }, { 0x168a00, 128, RI_ALL_ONLINE },
+ { 0x16a000, 1, RI_ALL_ONLINE }, { 0x16a004, 1535, RI_ALL_OFFLINE },
+ { 0x16c000, 1, RI_ALL_ONLINE }, { 0x16c004, 1535, RI_ALL_OFFLINE },
+ { 0x16e000, 16, RI_E1H_ONLINE }, { 0x16e100, 1, RI_E1H_ONLINE },
+ { 0x16e200, 2, RI_E1H_ONLINE }, { 0x16e400, 183, RI_E1H_ONLINE },
+ { 0x170000, 93, RI_ALL_ONLINE }, { 0x170180, 1, RI_ALL_ONLINE },
+ { 0x170190, 1, RI_ALL_ONLINE }, { 0x170200, 4, RI_ALL_ONLINE },
+ { 0x170214, 1, RI_ALL_ONLINE }, { 0x178000, 1, RI_ALL_ONLINE },
+ { 0x180000, 61, RI_ALL_ONLINE }, { 0x180100, 1, RI_ALL_ONLINE },
+ { 0x180110, 1, RI_ALL_ONLINE }, { 0x180120, 1, RI_ALL_ONLINE },
+ { 0x180130, 1, RI_ALL_ONLINE }, { 0x18013c, 2, RI_E1H_ONLINE },
+ { 0x180200, 58, RI_ALL_ONLINE }, { 0x180340, 4, RI_ALL_ONLINE },
+ { 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_ALL_OFFLINE },
+ { 0x181000, 4, RI_ALL_ONLINE }, { 0x181010, 1020, RI_ALL_OFFLINE },
+ { 0x1a0000, 1, RI_ALL_ONLINE }, { 0x1a0004, 1023, RI_ALL_OFFLINE },
+ { 0x1a1000, 1, RI_ALL_ONLINE }, { 0x1a1004, 4607, RI_ALL_OFFLINE },
+ { 0x1a5800, 2560, RI_E1H_OFFLINE }, { 0x1a8000, 64, RI_ALL_OFFLINE },
+ { 0x1a8100, 1984, RI_E1H_OFFLINE }, { 0x1aa000, 1, RI_E1H_ONLINE },
+ { 0x1aa004, 6655, RI_E1H_OFFLINE }, { 0x1b1800, 128, RI_ALL_OFFLINE },
+ { 0x1b1c00, 128, RI_ALL_OFFLINE }, { 0x1b2000, 1, RI_ALL_OFFLINE },
+ { 0x1b2400, 64, RI_E1H_OFFLINE }, { 0x1b8200, 1, RI_ALL_ONLINE },
+ { 0x1b8240, 1, RI_ALL_ONLINE }, { 0x1b8280, 1, RI_ALL_ONLINE },
+ { 0x1b82c0, 1, RI_ALL_ONLINE }, { 0x1b8a00, 1, RI_ALL_ONLINE },
+ { 0x1b8a80, 1, RI_ALL_ONLINE }, { 0x1c0000, 2, RI_ALL_ONLINE },
+ { 0x200000, 65, RI_ALL_ONLINE }, { 0x200110, 1, RI_ALL_ONLINE },
+ { 0x200120, 1, RI_ALL_ONLINE }, { 0x200130, 1, RI_ALL_ONLINE },
+ { 0x200140, 1, RI_ALL_ONLINE }, { 0x20014c, 2, RI_E1H_ONLINE },
+ { 0x200200, 58, RI_ALL_ONLINE }, { 0x200340, 4, RI_ALL_ONLINE },
+ { 0x200400, 1, RI_ALL_ONLINE }, { 0x200404, 255, RI_ALL_OFFLINE },
+ { 0x202000, 4, RI_ALL_ONLINE }, { 0x202010, 2044, RI_ALL_OFFLINE },
+ { 0x220000, 1, RI_ALL_ONLINE }, { 0x220004, 1023, RI_ALL_OFFLINE },
+ { 0x221000, 1, RI_ALL_ONLINE }, { 0x221004, 4607, RI_ALL_OFFLINE },
+ { 0x225800, 1536, RI_E1H_OFFLINE }, { 0x227000, 1, RI_E1H_ONLINE },
+ { 0x227004, 1023, RI_E1H_OFFLINE }, { 0x228000, 64, RI_ALL_OFFLINE },
+ { 0x228100, 8640, RI_E1H_OFFLINE }, { 0x231800, 128, RI_ALL_OFFLINE },
+ { 0x231c00, 128, RI_ALL_OFFLINE }, { 0x232000, 1, RI_ALL_OFFLINE },
+ { 0x232400, 64, RI_E1H_OFFLINE }, { 0x238200, 1, RI_ALL_ONLINE },
+ { 0x238240, 1, RI_ALL_ONLINE }, { 0x238280, 1, RI_ALL_ONLINE },
+ { 0x2382c0, 1, RI_ALL_ONLINE }, { 0x238a00, 1, RI_ALL_ONLINE },
+ { 0x238a80, 1, RI_ALL_ONLINE }, { 0x240000, 2, RI_ALL_ONLINE },
+ { 0x280000, 65, RI_ALL_ONLINE }, { 0x280110, 1, RI_ALL_ONLINE },
+ { 0x280120, 1, RI_ALL_ONLINE }, { 0x280130, 1, RI_ALL_ONLINE },
+ { 0x280140, 1, RI_ALL_ONLINE }, { 0x28014c, 2, RI_E1H_ONLINE },
+ { 0x280200, 58, RI_ALL_ONLINE }, { 0x280340, 4, RI_ALL_ONLINE },
+ { 0x280400, 1, RI_ALL_ONLINE }, { 0x280404, 255, RI_ALL_OFFLINE },
+ { 0x282000, 4, RI_ALL_ONLINE }, { 0x282010, 2044, RI_ALL_OFFLINE },
+ { 0x2a0000, 1, RI_ALL_ONLINE }, { 0x2a0004, 1023, RI_ALL_OFFLINE },
+ { 0x2a1000, 1, RI_ALL_ONLINE }, { 0x2a1004, 4607, RI_ALL_OFFLINE },
+ { 0x2a5800, 2560, RI_E1H_OFFLINE }, { 0x2a8000, 64, RI_ALL_OFFLINE },
+ { 0x2a8100, 960, RI_E1H_OFFLINE }, { 0x2a9000, 1, RI_E1H_ONLINE },
+ { 0x2a9004, 7679, RI_E1H_OFFLINE }, { 0x2b1800, 128, RI_ALL_OFFLINE },
+ { 0x2b1c00, 128, RI_ALL_OFFLINE }, { 0x2b2000, 1, RI_ALL_OFFLINE },
+ { 0x2b2400, 64, RI_E1H_OFFLINE }, { 0x2b8200, 1, RI_ALL_ONLINE },
+ { 0x2b8240, 1, RI_ALL_ONLINE }, { 0x2b8280, 1, RI_ALL_ONLINE },
+ { 0x2b82c0, 1, RI_ALL_ONLINE }, { 0x2b8a00, 1, RI_ALL_ONLINE },
+ { 0x2b8a80, 1, RI_ALL_ONLINE }, { 0x2c0000, 2, RI_ALL_ONLINE },
+ { 0x300000, 65, RI_ALL_ONLINE }, { 0x300110, 1, RI_ALL_ONLINE },
+ { 0x300120, 1, RI_ALL_ONLINE }, { 0x300130, 1, RI_ALL_ONLINE },
+ { 0x300140, 1, RI_ALL_ONLINE }, { 0x30014c, 2, RI_E1H_ONLINE },
+ { 0x300200, 58, RI_ALL_ONLINE }, { 0x300340, 4, RI_ALL_ONLINE },
+ { 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_ALL_OFFLINE },
+ { 0x302000, 4, RI_ALL_ONLINE }, { 0x302010, 2044, RI_ALL_OFFLINE },
+ { 0x320000, 1, RI_ALL_ONLINE }, { 0x320004, 1023, RI_ALL_OFFLINE },
+ { 0x321000, 1, RI_ALL_ONLINE }, { 0x321004, 4607, RI_ALL_OFFLINE },
+ { 0x325800, 2560, RI_E1H_OFFLINE }, { 0x328000, 64, RI_ALL_OFFLINE },
+ { 0x328100, 536, RI_E1H_OFFLINE }, { 0x328960, 1, RI_E1H_ONLINE },
+ { 0x328964, 8103, RI_E1H_OFFLINE }, { 0x331800, 128, RI_ALL_OFFLINE },
+ { 0x331c00, 128, RI_ALL_OFFLINE }, { 0x332000, 1, RI_ALL_OFFLINE },
+ { 0x332400, 64, RI_E1H_OFFLINE }, { 0x338200, 1, RI_ALL_ONLINE },
+ { 0x338240, 1, RI_ALL_ONLINE }, { 0x338280, 1, RI_ALL_ONLINE },
+ { 0x3382c0, 1, RI_ALL_ONLINE }, { 0x338a00, 1, RI_ALL_ONLINE },
+ { 0x338a80, 1, RI_ALL_ONLINE }, { 0x340000, 2, RI_ALL_ONLINE }
};
-#define IDLEREGS_COUNT 277
-static const struct reg_addr idle_addrs[IDLEREGS_COUNT] = {
- { 0x2114, 1, RI_ALL_ONLINE}, { 0x2120, 1, RI_ALL_ONLINE},
- { 0x212c, 4, RI_ALL_ONLINE}, { 0x2814, 1, RI_ALL_ONLINE},
- { 0x281c, 2, RI_ALL_ONLINE}, { 0xa38c, 1, RI_ALL_ONLINE},
- { 0xa408, 1, RI_ALL_ONLINE}, { 0xa42c, 12, RI_ALL_ONLINE},
- { 0xa600, 5, RI_E1H_ONLINE}, { 0xa618, 1, RI_E1H_ONLINE},
- { 0xc09c, 1, RI_ALL_ONLINE}, { 0x103b0, 1, RI_ALL_ONLINE},
- { 0x103c0, 1, RI_ALL_ONLINE}, { 0x103d0, 1, RI_E1H_ONLINE},
- { 0x2021c, 11, RI_ALL_ONLINE}, { 0x202a8, 1, RI_ALL_ONLINE},
- { 0x202b8, 1, RI_ALL_ONLINE}, { 0x20404, 1, RI_ALL_ONLINE},
- { 0x2040c, 2, RI_ALL_ONLINE}, { 0x2041c, 2, RI_ALL_ONLINE},
- { 0x40154, 14, RI_ALL_ONLINE}, { 0x40198, 1, RI_ALL_ONLINE},
- { 0x404ac, 1, RI_ALL_ONLINE}, { 0x404bc, 1, RI_ALL_ONLINE},
- { 0x42290, 1, RI_ALL_ONLINE}, { 0x422a0, 1, RI_ALL_ONLINE},
- { 0x422b0, 1, RI_ALL_ONLINE}, { 0x42548, 1, RI_ALL_ONLINE},
- { 0x42550, 1, RI_ALL_ONLINE}, { 0x42558, 1, RI_ALL_ONLINE},
- { 0x50160, 8, RI_ALL_ONLINE}, { 0x501d0, 1, RI_ALL_ONLINE},
- { 0x501e0, 1, RI_ALL_ONLINE}, { 0x50204, 1, RI_ALL_ONLINE},
- { 0x5020c, 2, RI_ALL_ONLINE}, { 0x5021c, 1, RI_ALL_ONLINE},
- { 0x60090, 1, RI_ALL_ONLINE}, { 0x6011c, 1, RI_ALL_ONLINE},
- { 0x6012c, 1, RI_ALL_ONLINE}, { 0xc101c, 1, RI_ALL_ONLINE},
- { 0xc102c, 1, RI_ALL_ONLINE}, { 0xc2290, 1, RI_ALL_ONLINE},
- { 0xc22a0, 1, RI_ALL_ONLINE}, { 0xc22b0, 1, RI_ALL_ONLINE},
- { 0xc2548, 1, RI_ALL_ONLINE}, { 0xc2550, 1, RI_ALL_ONLINE},
- { 0xc2558, 1, RI_ALL_ONLINE}, { 0xc4294, 1, RI_ALL_ONLINE},
- { 0xc42a4, 1, RI_ALL_ONLINE}, { 0xc42b4, 1, RI_ALL_ONLINE},
- { 0xc4550, 1, RI_ALL_ONLINE}, { 0xc4558, 1, RI_ALL_ONLINE},
- { 0xc4560, 1, RI_ALL_ONLINE}, { 0xd016c, 8, RI_ALL_ONLINE},
- { 0xd01d8, 1, RI_ALL_ONLINE}, { 0xd01e8, 1, RI_ALL_ONLINE},
- { 0xd0204, 1, RI_ALL_ONLINE}, { 0xd020c, 3, RI_ALL_ONLINE},
- { 0xe0154, 8, RI_ALL_ONLINE}, { 0xe01c8, 1, RI_ALL_ONLINE},
- { 0xe01d8, 1, RI_ALL_ONLINE}, { 0xe0204, 1, RI_ALL_ONLINE},
- { 0xe020c, 2, RI_ALL_ONLINE}, { 0xe021c, 2, RI_ALL_ONLINE},
- { 0x101014, 1, RI_ALL_ONLINE}, { 0x101030, 1, RI_ALL_ONLINE},
- { 0x101040, 1, RI_ALL_ONLINE}, { 0x102058, 1, RI_ALL_ONLINE},
- { 0x102080, 16, RI_ALL_ONLINE}, { 0x103004, 2, RI_ALL_ONLINE},
- { 0x103068, 1, RI_ALL_ONLINE}, { 0x103078, 1, RI_ALL_ONLINE},
- { 0x103088, 1, RI_ALL_ONLINE}, { 0x10309c, 2, RI_E1H_ONLINE},
- { 0x104004, 1, RI_ALL_ONLINE}, { 0x104018, 1, RI_ALL_ONLINE},
- { 0x104020, 1, RI_ALL_ONLINE}, { 0x10403c, 1, RI_ALL_ONLINE},
- { 0x1040fc, 1, RI_ALL_ONLINE}, { 0x10410c, 1, RI_ALL_ONLINE},
- { 0x104400, 64, RI_ALL_ONLINE}, { 0x104800, 64, RI_ALL_ONLINE},
- { 0x105000, 3, RI_ALL_ONLINE}, { 0x105010, 3, RI_ALL_ONLINE},
- { 0x105020, 3, RI_ALL_ONLINE}, { 0x105030, 3, RI_ALL_ONLINE},
- { 0x105040, 3, RI_ALL_ONLINE}, { 0x105050, 3, RI_ALL_ONLINE},
- { 0x105060, 3, RI_ALL_ONLINE}, { 0x105070, 3, RI_ALL_ONLINE},
- { 0x105080, 3, RI_ALL_ONLINE}, { 0x105090, 3, RI_ALL_ONLINE},
- { 0x1050a0, 3, RI_ALL_ONLINE}, { 0x1050b0, 3, RI_ALL_ONLINE},
- { 0x1050c0, 3, RI_ALL_ONLINE}, { 0x1050d0, 3, RI_ALL_ONLINE},
- { 0x1050e0, 3, RI_ALL_ONLINE}, { 0x1050f0, 3, RI_ALL_ONLINE},
- { 0x105100, 3, RI_ALL_ONLINE}, { 0x105110, 3, RI_ALL_ONLINE},
- { 0x105120, 3, RI_ALL_ONLINE}, { 0x105130, 3, RI_ALL_ONLINE},
- { 0x105140, 3, RI_ALL_ONLINE}, { 0x105150, 3, RI_ALL_ONLINE},
- { 0x105160, 3, RI_ALL_ONLINE}, { 0x105170, 3, RI_ALL_ONLINE},
- { 0x105180, 3, RI_ALL_ONLINE}, { 0x105190, 3, RI_ALL_ONLINE},
- { 0x1051a0, 3, RI_ALL_ONLINE}, { 0x1051b0, 3, RI_ALL_ONLINE},
- { 0x1051c0, 3, RI_ALL_ONLINE}, { 0x1051d0, 3, RI_ALL_ONLINE},
- { 0x1051e0, 3, RI_ALL_ONLINE}, { 0x1051f0, 3, RI_ALL_ONLINE},
- { 0x105200, 3, RI_ALL_ONLINE}, { 0x105210, 3, RI_ALL_ONLINE},
- { 0x105220, 3, RI_ALL_ONLINE}, { 0x105230, 3, RI_ALL_ONLINE},
- { 0x105240, 3, RI_ALL_ONLINE}, { 0x105250, 3, RI_ALL_ONLINE},
- { 0x105260, 3, RI_ALL_ONLINE}, { 0x105270, 3, RI_ALL_ONLINE},
- { 0x105280, 3, RI_ALL_ONLINE}, { 0x105290, 3, RI_ALL_ONLINE},
- { 0x1052a0, 3, RI_ALL_ONLINE}, { 0x1052b0, 3, RI_ALL_ONLINE},
- { 0x1052c0, 3, RI_ALL_ONLINE}, { 0x1052d0, 3, RI_ALL_ONLINE},
- { 0x1052e0, 3, RI_ALL_ONLINE}, { 0x1052f0, 3, RI_ALL_ONLINE},
- { 0x105300, 3, RI_ALL_ONLINE}, { 0x105310, 3, RI_ALL_ONLINE},
- { 0x105320, 3, RI_ALL_ONLINE}, { 0x105330, 3, RI_ALL_ONLINE},
- { 0x105340, 3, RI_ALL_ONLINE}, { 0x105350, 3, RI_ALL_ONLINE},
- { 0x105360, 3, RI_ALL_ONLINE}, { 0x105370, 3, RI_ALL_ONLINE},
- { 0x105380, 3, RI_ALL_ONLINE}, { 0x105390, 3, RI_ALL_ONLINE},
- { 0x1053a0, 3, RI_ALL_ONLINE}, { 0x1053b0, 3, RI_ALL_ONLINE},
- { 0x1053c0, 3, RI_ALL_ONLINE}, { 0x1053d0, 3, RI_ALL_ONLINE},
- { 0x1053e0, 3, RI_ALL_ONLINE}, { 0x1053f0, 3, RI_ALL_ONLINE},
- { 0x108094, 1, RI_ALL_ONLINE}, { 0x1201b0, 2, RI_ALL_ONLINE},
- { 0x12032c, 1, RI_ALL_ONLINE}, { 0x12036c, 3, RI_ALL_ONLINE},
- { 0x120408, 2, RI_ALL_ONLINE}, { 0x120414, 15, RI_ALL_ONLINE},
- { 0x120478, 2, RI_ALL_ONLINE}, { 0x12052c, 1, RI_ALL_ONLINE},
- { 0x120564, 3, RI_ALL_ONLINE}, { 0x12057c, 1, RI_ALL_ONLINE},
- { 0x12058c, 1, RI_ALL_ONLINE}, { 0x120608, 1, RI_E1H_ONLINE},
- { 0x120808, 1, RI_E1_ONLINE}, { 0x12080c, 2, RI_ALL_ONLINE},
- { 0x120818, 1, RI_ALL_ONLINE}, { 0x120820, 1, RI_ALL_ONLINE},
- { 0x120828, 1, RI_ALL_ONLINE}, { 0x120830, 1, RI_ALL_ONLINE},
- { 0x120838, 1, RI_ALL_ONLINE}, { 0x120840, 1, RI_ALL_ONLINE},
- { 0x120848, 1, RI_ALL_ONLINE}, { 0x120850, 1, RI_ALL_ONLINE},
- { 0x120858, 1, RI_ALL_ONLINE}, { 0x120860, 1, RI_ALL_ONLINE},
- { 0x120868, 1, RI_ALL_ONLINE}, { 0x120870, 1, RI_ALL_ONLINE},
- { 0x120878, 1, RI_ALL_ONLINE}, { 0x120880, 1, RI_ALL_ONLINE},
- { 0x120888, 1, RI_ALL_ONLINE}, { 0x120890, 1, RI_ALL_ONLINE},
- { 0x120898, 1, RI_ALL_ONLINE}, { 0x1208a0, 1, RI_ALL_ONLINE},
- { 0x1208a8, 1, RI_ALL_ONLINE}, { 0x1208b0, 1, RI_ALL_ONLINE},
- { 0x1208b8, 1, RI_ALL_ONLINE}, { 0x1208c0, 1, RI_ALL_ONLINE},
- { 0x1208c8, 1, RI_ALL_ONLINE}, { 0x1208d0, 1, RI_ALL_ONLINE},
- { 0x1208d8, 1, RI_ALL_ONLINE}, { 0x1208e0, 1, RI_ALL_ONLINE},
- { 0x1208e8, 1, RI_ALL_ONLINE}, { 0x1208f0, 1, RI_ALL_ONLINE},
- { 0x1208f8, 1, RI_ALL_ONLINE}, { 0x120900, 1, RI_ALL_ONLINE},
- { 0x120908, 1, RI_ALL_ONLINE}, { 0x14005c, 2, RI_ALL_ONLINE},
- { 0x1400d0, 2, RI_ALL_ONLINE}, { 0x1400e0, 1, RI_ALL_ONLINE},
- { 0x1401c8, 1, RI_ALL_ONLINE}, { 0x140200, 6, RI_ALL_ONLINE},
- { 0x16101c, 1, RI_ALL_ONLINE}, { 0x16102c, 1, RI_ALL_ONLINE},
- { 0x164014, 2, RI_ALL_ONLINE}, { 0x1640f0, 1, RI_ALL_ONLINE},
- { 0x166290, 1, RI_ALL_ONLINE}, { 0x1662a0, 1, RI_ALL_ONLINE},
- { 0x1662b0, 1, RI_ALL_ONLINE}, { 0x166548, 1, RI_ALL_ONLINE},
- { 0x166550, 1, RI_ALL_ONLINE}, { 0x166558, 1, RI_ALL_ONLINE},
- { 0x168000, 1, RI_ALL_ONLINE}, { 0x168008, 1, RI_ALL_ONLINE},
- { 0x168010, 1, RI_ALL_ONLINE}, { 0x168018, 1, RI_ALL_ONLINE},
- { 0x168028, 2, RI_ALL_ONLINE}, { 0x168058, 4, RI_ALL_ONLINE},
- { 0x168070, 1, RI_ALL_ONLINE}, { 0x168238, 1, RI_ALL_ONLINE},
- { 0x1682d0, 2, RI_ALL_ONLINE}, { 0x1682e0, 1, RI_ALL_ONLINE},
- { 0x168300, 67, RI_ALL_ONLINE}, { 0x168410, 2, RI_ALL_ONLINE},
- { 0x168438, 1, RI_ALL_ONLINE}, { 0x168448, 1, RI_ALL_ONLINE},
- { 0x168a00, 128, RI_ALL_ONLINE}, { 0x16e200, 128, RI_E1H_ONLINE},
- { 0x16e404, 2, RI_E1H_ONLINE}, { 0x16e584, 70, RI_E1H_ONLINE},
- { 0x1700a4, 1, RI_ALL_ONLINE}, { 0x1700ac, 2, RI_ALL_ONLINE},
- { 0x1700c0, 1, RI_ALL_ONLINE}, { 0x170174, 1, RI_ALL_ONLINE},
- { 0x170184, 1, RI_ALL_ONLINE}, { 0x1800f4, 1, RI_ALL_ONLINE},
- { 0x180104, 1, RI_ALL_ONLINE}, { 0x180114, 1, RI_ALL_ONLINE},
- { 0x180124, 1, RI_ALL_ONLINE}, { 0x18026c, 1, RI_ALL_ONLINE},
- { 0x1802a0, 1, RI_ALL_ONLINE}, { 0x1a1000, 1, RI_ALL_ONLINE},
- { 0x1aa000, 1, RI_E1H_ONLINE}, { 0x1b8000, 1, RI_ALL_ONLINE},
- { 0x1b8040, 1, RI_ALL_ONLINE}, { 0x1b8080, 1, RI_ALL_ONLINE},
- { 0x1b80c0, 1, RI_ALL_ONLINE}, { 0x200104, 1, RI_ALL_ONLINE},
- { 0x200114, 1, RI_ALL_ONLINE}, { 0x200124, 1, RI_ALL_ONLINE},
- { 0x200134, 1, RI_ALL_ONLINE}, { 0x20026c, 1, RI_ALL_ONLINE},
- { 0x2002a0, 1, RI_ALL_ONLINE}, { 0x221000, 1, RI_ALL_ONLINE},
- { 0x227000, 1, RI_E1H_ONLINE}, { 0x238000, 1, RI_ALL_ONLINE},
- { 0x238040, 1, RI_ALL_ONLINE}, { 0x238080, 1, RI_ALL_ONLINE},
- { 0x2380c0, 1, RI_ALL_ONLINE}, { 0x280104, 1, RI_ALL_ONLINE},
- { 0x280114, 1, RI_ALL_ONLINE}, { 0x280124, 1, RI_ALL_ONLINE},
- { 0x280134, 1, RI_ALL_ONLINE}, { 0x28026c, 1, RI_ALL_ONLINE},
- { 0x2802a0, 1, RI_ALL_ONLINE}, { 0x2a1000, 1, RI_ALL_ONLINE},
- { 0x2a9000, 1, RI_E1H_ONLINE}, { 0x2b8000, 1, RI_ALL_ONLINE},
- { 0x2b8040, 1, RI_ALL_ONLINE}, { 0x2b8080, 1, RI_ALL_ONLINE},
- { 0x2b80c0, 1, RI_ALL_ONLINE}, { 0x300104, 1, RI_ALL_ONLINE},
- { 0x300114, 1, RI_ALL_ONLINE}, { 0x300124, 1, RI_ALL_ONLINE},
- { 0x300134, 1, RI_ALL_ONLINE}, { 0x30026c, 1, RI_ALL_ONLINE},
- { 0x3002a0, 1, RI_ALL_ONLINE}, { 0x321000, 1, RI_ALL_ONLINE},
- { 0x328960, 1, RI_E1H_ONLINE}, { 0x338000, 1, RI_ALL_ONLINE},
- { 0x338040, 1, RI_ALL_ONLINE}, { 0x338080, 1, RI_ALL_ONLINE},
- { 0x3380c0, 1, RI_ALL_ONLINE}
+#define IDLE_REGS_COUNT 277
+static const struct reg_addr idle_addrs[IDLE_REGS_COUNT] = {
+ { 0x2114, 1, RI_ALL_ONLINE }, { 0x2120, 1, RI_ALL_ONLINE },
+ { 0x212c, 4, RI_ALL_ONLINE }, { 0x2814, 1, RI_ALL_ONLINE },
+ { 0x281c, 2, RI_ALL_ONLINE }, { 0xa38c, 1, RI_ALL_ONLINE },
+ { 0xa408, 1, RI_ALL_ONLINE }, { 0xa42c, 12, RI_ALL_ONLINE },
+ { 0xa600, 5, RI_E1H_ONLINE }, { 0xa618, 1, RI_E1H_ONLINE },
+ { 0xc09c, 1, RI_ALL_ONLINE }, { 0x103b0, 1, RI_ALL_ONLINE },
+ { 0x103c0, 1, RI_ALL_ONLINE }, { 0x103d0, 1, RI_E1H_ONLINE },
+ { 0x2021c, 11, RI_ALL_ONLINE }, { 0x202a8, 1, RI_ALL_ONLINE },
+ { 0x202b8, 1, RI_ALL_ONLINE }, { 0x20404, 1, RI_ALL_ONLINE },
+ { 0x2040c, 2, RI_ALL_ONLINE }, { 0x2041c, 2, RI_ALL_ONLINE },
+ { 0x40154, 14, RI_ALL_ONLINE }, { 0x40198, 1, RI_ALL_ONLINE },
+ { 0x404ac, 1, RI_ALL_ONLINE }, { 0x404bc, 1, RI_ALL_ONLINE },
+ { 0x42290, 1, RI_ALL_ONLINE }, { 0x422a0, 1, RI_ALL_ONLINE },
+ { 0x422b0, 1, RI_ALL_ONLINE }, { 0x42548, 1, RI_ALL_ONLINE },
+ { 0x42550, 1, RI_ALL_ONLINE }, { 0x42558, 1, RI_ALL_ONLINE },
+ { 0x50160, 8, RI_ALL_ONLINE }, { 0x501d0, 1, RI_ALL_ONLINE },
+ { 0x501e0, 1, RI_ALL_ONLINE }, { 0x50204, 1, RI_ALL_ONLINE },
+ { 0x5020c, 2, RI_ALL_ONLINE }, { 0x5021c, 1, RI_ALL_ONLINE },
+ { 0x60090, 1, RI_ALL_ONLINE }, { 0x6011c, 1, RI_ALL_ONLINE },
+ { 0x6012c, 1, RI_ALL_ONLINE }, { 0xc101c, 1, RI_ALL_ONLINE },
+ { 0xc102c, 1, RI_ALL_ONLINE }, { 0xc2290, 1, RI_ALL_ONLINE },
+ { 0xc22a0, 1, RI_ALL_ONLINE }, { 0xc22b0, 1, RI_ALL_ONLINE },
+ { 0xc2548, 1, RI_ALL_ONLINE }, { 0xc2550, 1, RI_ALL_ONLINE },
+ { 0xc2558, 1, RI_ALL_ONLINE }, { 0xc4294, 1, RI_ALL_ONLINE },
+ { 0xc42a4, 1, RI_ALL_ONLINE }, { 0xc42b4, 1, RI_ALL_ONLINE },
+ { 0xc4550, 1, RI_ALL_ONLINE }, { 0xc4558, 1, RI_ALL_ONLINE },
+ { 0xc4560, 1, RI_ALL_ONLINE }, { 0xd016c, 8, RI_ALL_ONLINE },
+ { 0xd01d8, 1, RI_ALL_ONLINE }, { 0xd01e8, 1, RI_ALL_ONLINE },
+ { 0xd0204, 1, RI_ALL_ONLINE }, { 0xd020c, 3, RI_ALL_ONLINE },
+ { 0xe0154, 8, RI_ALL_ONLINE }, { 0xe01c8, 1, RI_ALL_ONLINE },
+ { 0xe01d8, 1, RI_ALL_ONLINE }, { 0xe0204, 1, RI_ALL_ONLINE },
+ { 0xe020c, 2, RI_ALL_ONLINE }, { 0xe021c, 2, RI_ALL_ONLINE },
+ { 0x101014, 1, RI_ALL_ONLINE }, { 0x101030, 1, RI_ALL_ONLINE },
+ { 0x101040, 1, RI_ALL_ONLINE }, { 0x102058, 1, RI_ALL_ONLINE },
+ { 0x102080, 16, RI_ALL_ONLINE }, { 0x103004, 2, RI_ALL_ONLINE },
+ { 0x103068, 1, RI_ALL_ONLINE }, { 0x103078, 1, RI_ALL_ONLINE },
+ { 0x103088, 1, RI_ALL_ONLINE }, { 0x10309c, 2, RI_E1H_ONLINE },
+ { 0x104004, 1, RI_ALL_ONLINE }, { 0x104018, 1, RI_ALL_ONLINE },
+ { 0x104020, 1, RI_ALL_ONLINE }, { 0x10403c, 1, RI_ALL_ONLINE },
+ { 0x1040fc, 1, RI_ALL_ONLINE }, { 0x10410c, 1, RI_ALL_ONLINE },
+ { 0x104400, 64, RI_ALL_ONLINE }, { 0x104800, 64, RI_ALL_ONLINE },
+ { 0x105000, 3, RI_ALL_ONLINE }, { 0x105010, 3, RI_ALL_ONLINE },
+ { 0x105020, 3, RI_ALL_ONLINE }, { 0x105030, 3, RI_ALL_ONLINE },
+ { 0x105040, 3, RI_ALL_ONLINE }, { 0x105050, 3, RI_ALL_ONLINE },
+ { 0x105060, 3, RI_ALL_ONLINE }, { 0x105070, 3, RI_ALL_ONLINE },
+ { 0x105080, 3, RI_ALL_ONLINE }, { 0x105090, 3, RI_ALL_ONLINE },
+ { 0x1050a0, 3, RI_ALL_ONLINE }, { 0x1050b0, 3, RI_ALL_ONLINE },
+ { 0x1050c0, 3, RI_ALL_ONLINE }, { 0x1050d0, 3, RI_ALL_ONLINE },
+ { 0x1050e0, 3, RI_ALL_ONLINE }, { 0x1050f0, 3, RI_ALL_ONLINE },
+ { 0x105100, 3, RI_ALL_ONLINE }, { 0x105110, 3, RI_ALL_ONLINE },
+ { 0x105120, 3, RI_ALL_ONLINE }, { 0x105130, 3, RI_ALL_ONLINE },
+ { 0x105140, 3, RI_ALL_ONLINE }, { 0x105150, 3, RI_ALL_ONLINE },
+ { 0x105160, 3, RI_ALL_ONLINE }, { 0x105170, 3, RI_ALL_ONLINE },
+ { 0x105180, 3, RI_ALL_ONLINE }, { 0x105190, 3, RI_ALL_ONLINE },
+ { 0x1051a0, 3, RI_ALL_ONLINE }, { 0x1051b0, 3, RI_ALL_ONLINE },
+ { 0x1051c0, 3, RI_ALL_ONLINE }, { 0x1051d0, 3, RI_ALL_ONLINE },
+ { 0x1051e0, 3, RI_ALL_ONLINE }, { 0x1051f0, 3, RI_ALL_ONLINE },
+ { 0x105200, 3, RI_ALL_ONLINE }, { 0x105210, 3, RI_ALL_ONLINE },
+ { 0x105220, 3, RI_ALL_ONLINE }, { 0x105230, 3, RI_ALL_ONLINE },
+ { 0x105240, 3, RI_ALL_ONLINE }, { 0x105250, 3, RI_ALL_ONLINE },
+ { 0x105260, 3, RI_ALL_ONLINE }, { 0x105270, 3, RI_ALL_ONLINE },
+ { 0x105280, 3, RI_ALL_ONLINE }, { 0x105290, 3, RI_ALL_ONLINE },
+ { 0x1052a0, 3, RI_ALL_ONLINE }, { 0x1052b0, 3, RI_ALL_ONLINE },
+ { 0x1052c0, 3, RI_ALL_ONLINE }, { 0x1052d0, 3, RI_ALL_ONLINE },
+ { 0x1052e0, 3, RI_ALL_ONLINE }, { 0x1052f0, 3, RI_ALL_ONLINE },
+ { 0x105300, 3, RI_ALL_ONLINE }, { 0x105310, 3, RI_ALL_ONLINE },
+ { 0x105320, 3, RI_ALL_ONLINE }, { 0x105330, 3, RI_ALL_ONLINE },
+ { 0x105340, 3, RI_ALL_ONLINE }, { 0x105350, 3, RI_ALL_ONLINE },
+ { 0x105360, 3, RI_ALL_ONLINE }, { 0x105370, 3, RI_ALL_ONLINE },
+ { 0x105380, 3, RI_ALL_ONLINE }, { 0x105390, 3, RI_ALL_ONLINE },
+ { 0x1053a0, 3, RI_ALL_ONLINE }, { 0x1053b0, 3, RI_ALL_ONLINE },
+ { 0x1053c0, 3, RI_ALL_ONLINE }, { 0x1053d0, 3, RI_ALL_ONLINE },
+ { 0x1053e0, 3, RI_ALL_ONLINE }, { 0x1053f0, 3, RI_ALL_ONLINE },
+ { 0x108094, 1, RI_ALL_ONLINE }, { 0x1201b0, 2, RI_ALL_ONLINE },
+ { 0x12032c, 1, RI_ALL_ONLINE }, { 0x12036c, 3, RI_ALL_ONLINE },
+ { 0x120408, 2, RI_ALL_ONLINE }, { 0x120414, 15, RI_ALL_ONLINE },
+ { 0x120478, 2, RI_ALL_ONLINE }, { 0x12052c, 1, RI_ALL_ONLINE },
+ { 0x120564, 3, RI_ALL_ONLINE }, { 0x12057c, 1, RI_ALL_ONLINE },
+ { 0x12058c, 1, RI_ALL_ONLINE }, { 0x120608, 1, RI_E1H_ONLINE },
+ { 0x120808, 1, RI_E1_ONLINE }, { 0x12080c, 2, RI_ALL_ONLINE },
+ { 0x120818, 1, RI_ALL_ONLINE }, { 0x120820, 1, RI_ALL_ONLINE },
+ { 0x120828, 1, RI_ALL_ONLINE }, { 0x120830, 1, RI_ALL_ONLINE },
+ { 0x120838, 1, RI_ALL_ONLINE }, { 0x120840, 1, RI_ALL_ONLINE },
+ { 0x120848, 1, RI_ALL_ONLINE }, { 0x120850, 1, RI_ALL_ONLINE },
+ { 0x120858, 1, RI_ALL_ONLINE }, { 0x120860, 1, RI_ALL_ONLINE },
+ { 0x120868, 1, RI_ALL_ONLINE }, { 0x120870, 1, RI_ALL_ONLINE },
+ { 0x120878, 1, RI_ALL_ONLINE }, { 0x120880, 1, RI_ALL_ONLINE },
+ { 0x120888, 1, RI_ALL_ONLINE }, { 0x120890, 1, RI_ALL_ONLINE },
+ { 0x120898, 1, RI_ALL_ONLINE }, { 0x1208a0, 1, RI_ALL_ONLINE },
+ { 0x1208a8, 1, RI_ALL_ONLINE }, { 0x1208b0, 1, RI_ALL_ONLINE },
+ { 0x1208b8, 1, RI_ALL_ONLINE }, { 0x1208c0, 1, RI_ALL_ONLINE },
+ { 0x1208c8, 1, RI_ALL_ONLINE }, { 0x1208d0, 1, RI_ALL_ONLINE },
+ { 0x1208d8, 1, RI_ALL_ONLINE }, { 0x1208e0, 1, RI_ALL_ONLINE },
+ { 0x1208e8, 1, RI_ALL_ONLINE }, { 0x1208f0, 1, RI_ALL_ONLINE },
+ { 0x1208f8, 1, RI_ALL_ONLINE }, { 0x120900, 1, RI_ALL_ONLINE },
+ { 0x120908, 1, RI_ALL_ONLINE }, { 0x14005c, 2, RI_ALL_ONLINE },
+ { 0x1400d0, 2, RI_ALL_ONLINE }, { 0x1400e0, 1, RI_ALL_ONLINE },
+ { 0x1401c8, 1, RI_ALL_ONLINE }, { 0x140200, 6, RI_ALL_ONLINE },
+ { 0x16101c, 1, RI_ALL_ONLINE }, { 0x16102c, 1, RI_ALL_ONLINE },
+ { 0x164014, 2, RI_ALL_ONLINE }, { 0x1640f0, 1, RI_ALL_ONLINE },
+ { 0x166290, 1, RI_ALL_ONLINE }, { 0x1662a0, 1, RI_ALL_ONLINE },
+ { 0x1662b0, 1, RI_ALL_ONLINE }, { 0x166548, 1, RI_ALL_ONLINE },
+ { 0x166550, 1, RI_ALL_ONLINE }, { 0x166558, 1, RI_ALL_ONLINE },
+ { 0x168000, 1, RI_ALL_ONLINE }, { 0x168008, 1, RI_ALL_ONLINE },
+ { 0x168010, 1, RI_ALL_ONLINE }, { 0x168018, 1, RI_ALL_ONLINE },
+ { 0x168028, 2, RI_ALL_ONLINE }, { 0x168058, 4, RI_ALL_ONLINE },
+ { 0x168070, 1, RI_ALL_ONLINE }, { 0x168238, 1, RI_ALL_ONLINE },
+ { 0x1682d0, 2, RI_ALL_ONLINE }, { 0x1682e0, 1, RI_ALL_ONLINE },
+ { 0x168300, 67, RI_ALL_ONLINE }, { 0x168410, 2, RI_ALL_ONLINE },
+ { 0x168438, 1, RI_ALL_ONLINE }, { 0x168448, 1, RI_ALL_ONLINE },
+ { 0x168a00, 128, RI_ALL_ONLINE }, { 0x16e200, 128, RI_E1H_ONLINE },
+ { 0x16e404, 2, RI_E1H_ONLINE }, { 0x16e584, 70, RI_E1H_ONLINE },
+ { 0x1700a4, 1, RI_ALL_ONLINE }, { 0x1700ac, 2, RI_ALL_ONLINE },
+ { 0x1700c0, 1, RI_ALL_ONLINE }, { 0x170174, 1, RI_ALL_ONLINE },
+ { 0x170184, 1, RI_ALL_ONLINE }, { 0x1800f4, 1, RI_ALL_ONLINE },
+ { 0x180104, 1, RI_ALL_ONLINE }, { 0x180114, 1, RI_ALL_ONLINE },
+ { 0x180124, 1, RI_ALL_ONLINE }, { 0x18026c, 1, RI_ALL_ONLINE },
+ { 0x1802a0, 1, RI_ALL_ONLINE }, { 0x1a1000, 1, RI_ALL_ONLINE },
+ { 0x1aa000, 1, RI_E1H_ONLINE }, { 0x1b8000, 1, RI_ALL_ONLINE },
+ { 0x1b8040, 1, RI_ALL_ONLINE }, { 0x1b8080, 1, RI_ALL_ONLINE },
+ { 0x1b80c0, 1, RI_ALL_ONLINE }, { 0x200104, 1, RI_ALL_ONLINE },
+ { 0x200114, 1, RI_ALL_ONLINE }, { 0x200124, 1, RI_ALL_ONLINE },
+ { 0x200134, 1, RI_ALL_ONLINE }, { 0x20026c, 1, RI_ALL_ONLINE },
+ { 0x2002a0, 1, RI_ALL_ONLINE }, { 0x221000, 1, RI_ALL_ONLINE },
+ { 0x227000, 1, RI_E1H_ONLINE }, { 0x238000, 1, RI_ALL_ONLINE },
+ { 0x238040, 1, RI_ALL_ONLINE }, { 0x238080, 1, RI_ALL_ONLINE },
+ { 0x2380c0, 1, RI_ALL_ONLINE }, { 0x280104, 1, RI_ALL_ONLINE },
+ { 0x280114, 1, RI_ALL_ONLINE }, { 0x280124, 1, RI_ALL_ONLINE },
+ { 0x280134, 1, RI_ALL_ONLINE }, { 0x28026c, 1, RI_ALL_ONLINE },
+ { 0x2802a0, 1, RI_ALL_ONLINE }, { 0x2a1000, 1, RI_ALL_ONLINE },
+ { 0x2a9000, 1, RI_E1H_ONLINE }, { 0x2b8000, 1, RI_ALL_ONLINE },
+ { 0x2b8040, 1, RI_ALL_ONLINE }, { 0x2b8080, 1, RI_ALL_ONLINE },
+ { 0x2b80c0, 1, RI_ALL_ONLINE }, { 0x300104, 1, RI_ALL_ONLINE },
+ { 0x300114, 1, RI_ALL_ONLINE }, { 0x300124, 1, RI_ALL_ONLINE },
+ { 0x300134, 1, RI_ALL_ONLINE }, { 0x30026c, 1, RI_ALL_ONLINE },
+ { 0x3002a0, 1, RI_ALL_ONLINE }, { 0x321000, 1, RI_ALL_ONLINE },
+ { 0x328960, 1, RI_E1H_ONLINE }, { 0x338000, 1, RI_ALL_ONLINE },
+ { 0x338040, 1, RI_ALL_ONLINE }, { 0x338080, 1, RI_ALL_ONLINE },
+ { 0x3380c0, 1, RI_ALL_ONLINE }
};
+#define WREGS_COUNT_E1 1
static const u32 read_reg_e1_0[] = { 0x1b1000 };
-#define WREGS_COUNT_E1 1
static const struct wreg_addr wreg_addrs_e1[WREGS_COUNT_E1] = {
{ 0x1b0c00, 192, 1, read_reg_e1_0, RI_E1_OFFLINE }
};
+
+#define WREGS_COUNT_E1H 1
static const u32 read_reg_e1h_0[] = { 0x1b1040, 0x1b1000 };
-#define WREGS_COUNT_E1H 1
static const struct wreg_addr wreg_addrs_e1h[WREGS_COUNT_E1H] = {
{ 0x1b0c00, 256, 2, read_reg_e1h_0, RI_E1H_OFFLINE }
};
@@ -512,15 +517,18 @@
static const struct dump_sign dump_sign_all = { 0x49aa93ee, 0x40835, 0x22 };
-#define TIMER_REGS_COUNT_E1 2
+#define TIMER_REGS_COUNT_E1 2
static const u32 timer_status_regs_e1[TIMER_REGS_COUNT_E1] =
{ 0x164014, 0x164018 };
static const u32 timer_scan_regs_e1[TIMER_REGS_COUNT_E1] =
{ 0x1640d0, 0x1640d4 };
-#define TIMER_REGS_COUNT_E1H 2
+
+#define TIMER_REGS_COUNT_E1H 2
static const u32 timer_status_regs_e1h[TIMER_REGS_COUNT_E1H] =
{ 0x164014, 0x164018 };
static const u32 timer_scan_regs_e1h[TIMER_REGS_COUNT_E1H] =
{ 0x1640d0, 0x1640d4 };
+
+#endif /* BNX2X_DUMP_H */
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index e2df238..931dcac 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -12,48 +12,117 @@
(IS_E1H_OFFSET ? 0x7000 : 0x1000)
#define CSTORM_ASSERT_LIST_OFFSET(idx) \
(IS_E1H_OFFSET ? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
-#define CSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
- (IS_E1H_OFFSET ? (0x8522 + ((function>>1) * 0x40) + \
- ((function&1) * 0x100) + (index * 0x4)) : (0x1922 + (function * \
+#define CSTORM_DEF_SB_HC_DISABLE_C_OFFSET(function, index) \
+ (IS_E1H_OFFSET ? (0x8622 + ((function>>1) * 0x40) + \
+ ((function&1) * 0x100) + (index * 0x4)) : (0x3562 + (function * \
0x40) + (index * 0x4)))
-#define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x8500 + ((function>>1) * 0x40) + \
- ((function&1) * 0x100)) : (0x1900 + (function * 0x40)))
-#define CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x8508 + ((function>>1) * 0x40) + \
- ((function&1) * 0x100)) : (0x1908 + (function * 0x40)))
+#define CSTORM_DEF_SB_HC_DISABLE_U_OFFSET(function, index) \
+ (IS_E1H_OFFSET ? (0x8822 + ((function>>1) * 0x80) + \
+ ((function&1) * 0x200) + (index * 0x4)) : (0x35e2 + (function * \
+ 0x80) + (index * 0x4)))
+#define CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8600 + ((function>>1) * 0x40) + \
+ ((function&1) * 0x100)) : (0x3540 + (function * 0x40)))
+#define CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8800 + ((function>>1) * 0x80) + \
+ ((function&1) * 0x200)) : (0x35c0 + (function * 0x80)))
+#define CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8608 + ((function>>1) * 0x40) + \
+ ((function&1) * 0x100)) : (0x3548 + (function * 0x40)))
+#define CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8808 + ((function>>1) * 0x80) + \
+ ((function&1) * 0x200)) : (0x35c8 + (function * 0x80)))
#define CSTORM_FUNCTION_MODE_OFFSET \
(IS_E1H_OFFSET ? 0x11e8 : 0xffffffff)
-#define CSTORM_HC_BTR_OFFSET(port) \
- (IS_E1H_OFFSET ? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
-#define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
- (IS_E1H_OFFSET ? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
- (index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
+#define CSTORM_HC_BTR_C_OFFSET(port) \
+ (IS_E1H_OFFSET ? (0x8c04 + (port * 0xf0)) : (0x36c4 + (port * 0xc0)))
+#define CSTORM_HC_BTR_U_OFFSET(port) \
+ (IS_E1H_OFFSET ? (0x8de4 + (port * 0xf0)) : (0x3844 + (port * 0xc0)))
+#define CSTORM_ISCSI_CQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6680 + (function * 0x8)) : (0x25a0 + \
+ (function * 0x8)))
+#define CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x66c0 + (function * 0x8)) : (0x25b0 + \
+ (function * 0x8)))
+#define CSTORM_ISCSI_EQ_CONS_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x6040 + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x2410 + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x6044 + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x2414 + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x604c + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x241c + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_VALID_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x6057 + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x2427 + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_EQ_PROD_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x6042 + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x2412 + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_EQ_SB_INDEX_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x6056 + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x2426 + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_EQ_SB_NUM_OFFSET(function, eqIdx) \
+ (IS_E1H_OFFSET ? (0x6054 + (function * 0xc0) + (eqIdx * 0x18)) : \
+ (0x2424 + (function * 0xc0) + (eqIdx * 0x18)))
+#define CSTORM_ISCSI_HQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6640 + (function * 0x8)) : (0x2590 + \
+ (function * 0x8)))
+#define CSTORM_ISCSI_NUM_OF_TASKS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6004 + (function * 0x8)) : (0x2404 + \
+ (function * 0x8)))
+#define CSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6002 + (function * 0x8)) : (0x2402 + \
+ (function * 0x8)))
+#define CSTORM_ISCSI_PAGE_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6000 + (function * 0x8)) : (0x2400 + \
+ (function * 0x8)))
+#define CSTORM_SB_HC_DISABLE_C_OFFSET(port, cpu_id, index) \
+ (IS_E1H_OFFSET ? (0x811a + (port * 0x280) + (cpu_id * 0x28) + \
+ (index * 0x4)) : (0x305a + (port * 0x280) + (cpu_id * 0x28) + \
(index * 0x4)))
-#define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
- (IS_E1H_OFFSET ? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
- (index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
+#define CSTORM_SB_HC_DISABLE_U_OFFSET(port, cpu_id, index) \
+ (IS_E1H_OFFSET ? (0xb01a + (port * 0x800) + (cpu_id * 0x80) + \
+ (index * 0x4)) : (0x401a + (port * 0x800) + (cpu_id * 0x80) + \
(index * 0x4)))
-#define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
- (IS_E1H_OFFSET ? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
- (0x1400 + (port * 0x280) + (cpu_id * 0x28)))
-#define CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
- (IS_E1H_OFFSET ? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
- (0x1408 + (port * 0x280) + (cpu_id * 0x28)))
+#define CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, cpu_id, index) \
+ (IS_E1H_OFFSET ? (0x8118 + (port * 0x280) + (cpu_id * 0x28) + \
+ (index * 0x4)) : (0x3058 + (port * 0x280) + (cpu_id * 0x28) + \
+ (index * 0x4)))
+#define CSTORM_SB_HC_TIMEOUT_U_OFFSET(port, cpu_id, index) \
+ (IS_E1H_OFFSET ? (0xb018 + (port * 0x800) + (cpu_id * 0x80) + \
+ (index * 0x4)) : (0x4018 + (port * 0x800) + (cpu_id * 0x80) + \
+ (index * 0x4)))
+#define CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, cpu_id) \
+ (IS_E1H_OFFSET ? (0x8100 + (port * 0x280) + (cpu_id * 0x28)) : \
+ (0x3040 + (port * 0x280) + (cpu_id * 0x28)))
+#define CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, cpu_id) \
+ (IS_E1H_OFFSET ? (0xb000 + (port * 0x800) + (cpu_id * 0x80)) : \
+ (0x4000 + (port * 0x800) + (cpu_id * 0x80)))
+#define CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, cpu_id) \
+ (IS_E1H_OFFSET ? (0x8108 + (port * 0x280) + (cpu_id * 0x28)) : \
+ (0x3048 + (port * 0x280) + (cpu_id * 0x28)))
+#define CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, cpu_id) \
+ (IS_E1H_OFFSET ? (0xb008 + (port * 0x800) + (cpu_id * 0x80)) : \
+ (0x4008 + (port * 0x800) + (cpu_id * 0x80)))
+#define CSTORM_SB_STATUS_BLOCK_C_SIZE 0x10
+#define CSTORM_SB_STATUS_BLOCK_U_SIZE 0x60
#define CSTORM_STATS_FLAGS_OFFSET(function) \
(IS_E1H_OFFSET ? (0x1108 + (function * 0x8)) : (0x5108 + \
(function * 0x8)))
#define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x31c0 + (function * 0x20)) : 0xffffffff)
+ (IS_E1H_OFFSET ? (0x3200 + (function * 0x20)) : 0xffffffff)
#define TSTORM_ASSERT_LIST_INDEX_OFFSET \
(IS_E1H_OFFSET ? 0xa000 : 0x1000)
#define TSTORM_ASSERT_LIST_OFFSET(idx) \
(IS_E1H_OFFSET ? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
#define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) \
- (IS_E1H_OFFSET ? (0x3350 + (port * 0x190) + (client_id * 0x10)) \
- : (0x9c0 + (port * 0x130) + (client_id * 0x10)))
+ (IS_E1H_OFFSET ? (0x33a0 + (port * 0x1a0) + (client_id * 0x10)) \
+ : (0x9c0 + (port * 0x120) + (client_id * 0x10)))
#define TSTORM_COMMON_SAFC_WORKAROUND_ENABLE_OFFSET \
- (IS_E1H_OFFSET ? 0x1ad8 : 0xffffffff)
+ (IS_E1H_OFFSET ? 0x1ed8 : 0xffffffff)
+#define TSTORM_COMMON_SAFC_WORKAROUND_TIMEOUT_10USEC_OFFSET \
+ (IS_E1H_OFFSET ? 0x1eda : 0xffffffff)
#define TSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
(IS_E1H_OFFSET ? (0xb01a + ((function>>1) * 0x28) + \
((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
@@ -65,95 +134,133 @@
(IS_E1H_OFFSET ? (0xb008 + ((function>>1) * 0x28) + \
((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
#define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2b80 + (function * 0x8)) : (0x4b68 + \
+ (IS_E1H_OFFSET ? (0x2940 + (function * 0x8)) : (0x4928 + \
(function * 0x8)))
#define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x3000 + (function * 0x38)) : (0x1500 + \
- (function * 0x38)))
+ (IS_E1H_OFFSET ? (0x3000 + (function * 0x40)) : (0x1500 + \
+ (function * 0x40)))
#define TSTORM_FUNCTION_MODE_OFFSET \
- (IS_E1H_OFFSET ? 0x1ad0 : 0xffffffff)
+ (IS_E1H_OFFSET ? 0x1ed0 : 0xffffffff)
#define TSTORM_HC_BTR_OFFSET(port) \
(IS_E1H_OFFSET ? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
#define TSTORM_INDIRECTION_TABLE_OFFSET(function) \
(IS_E1H_OFFSET ? (0x12c8 + (function * 0x80)) : (0x22c8 + \
(function * 0x80)))
#define TSTORM_INDIRECTION_TABLE_SIZE 0x80
-#define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x3008 + (function * 0x38)) : (0x1508 + \
- (function * 0x38)))
-#define TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
- (IS_E1H_OFFSET ? (0x2010 + (port * 0x5b0) + (stats_counter_id * \
- 0x50)) : (0x4080 + (port * 0x5b0) + (stats_counter_id * 0x50)))
-#define TSTORM_STATS_FLAGS_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2c00 + (function * 0x8)) : (0x4b88 + \
+#define TSTORM_ISCSI_CONN_BUF_PBL_OFFSET(function, pblEntry) \
+ (IS_E1H_OFFSET ? (0x60c0 + (function * 0x40) + (pblEntry * 0x8)) \
+ : (0x4c30 + (function * 0x40) + (pblEntry * 0x8)))
+#define TSTORM_ISCSI_ERROR_BITMAP_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6340 + (function * 0x8)) : (0x4cd0 + \
(function * 0x8)))
-#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET ? 0x3680 : 0x1c20)
-#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET ? 0xa040 : 0x2c10)
-#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET ? 0x2440 : 0x1200)
+#define TSTORM_ISCSI_NUM_OF_TASKS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6004 + (function * 0x8)) : (0x4c04 + \
+ (function * 0x8)))
+#define TSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6002 + (function * 0x8)) : (0x4c02 + \
+ (function * 0x8)))
+#define TSTORM_ISCSI_PAGE_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6000 + (function * 0x8)) : (0x4c00 + \
+ (function * 0x8)))
+#define TSTORM_ISCSI_RQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6080 + (function * 0x8)) : (0x4c20 + \
+ (function * 0x8)))
+#define TSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6040 + (function * 0x8)) : (0x4c10 + \
+ (function * 0x8)))
+#define TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6042 + (function * 0x8)) : (0x4c12 + \
+ (function * 0x8)))
+#define TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x6044 + (function * 0x8)) : (0x4c14 + \
+ (function * 0x8)))
+#define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x3008 + (function * 0x40)) : (0x1508 + \
+ (function * 0x40)))
+#define TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+ (IS_E1H_OFFSET ? (0x2010 + (port * 0x490) + (stats_counter_id * \
+ 0x40)) : (0x4010 + (port * 0x490) + (stats_counter_id * 0x40)))
+#define TSTORM_STATS_FLAGS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x29c0 + (function * 0x8)) : (0x4948 + \
+ (function * 0x8)))
+#define TSTORM_TCP_MAX_CWND_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x4004 + (function * 0x8)) : (0x1fb4 + \
+ (function * 0x8)))
+#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET ? 0xa000 : 0x3000)
+#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET ? 0x2000 : 0x1000)
#define USTORM_ASSERT_LIST_INDEX_OFFSET \
- (IS_E1H_OFFSET ? 0x8960 : 0x1000)
+ (IS_E1H_OFFSET ? 0x8000 : 0x1000)
#define USTORM_ASSERT_LIST_OFFSET(idx) \
- (IS_E1H_OFFSET ? (0x8980 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+ (IS_E1H_OFFSET ? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
#define USTORM_CQE_PAGE_BASE_OFFSET(port, clientId) \
- (IS_E1H_OFFSET ? (0x8018 + (port * 0x4b0) + (clientId * 0x30)) : \
- (0x5330 + (port * 0x260) + (clientId * 0x20)))
-#define USTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
- (IS_E1H_OFFSET ? (0x9522 + ((function>>1) * 0x40) + \
- ((function&1) * 0x100) + (index * 0x4)) : (0x1922 + (function * \
- 0x40) + (index * 0x4)))
-#define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x9500 + ((function>>1) * 0x40) + \
- ((function&1) * 0x100)) : (0x1900 + (function * 0x40)))
-#define USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x9508 + ((function>>1) * 0x40) + \
- ((function&1) * 0x100)) : (0x1908 + (function * 0x40)))
+ (IS_E1H_OFFSET ? (0x1010 + (port * 0x680) + (clientId * 0x40)) : \
+ (0x4010 + (port * 0x360) + (clientId * 0x30)))
+#define USTORM_CQE_PAGE_NEXT_OFFSET(port, clientId) \
+ (IS_E1H_OFFSET ? (0x1028 + (port * 0x680) + (clientId * 0x40)) : \
+ (0x4028 + (port * 0x360) + (clientId * 0x30)))
+#define USTORM_ETH_PAUSE_ENABLED_OFFSET(port) \
+ (IS_E1H_OFFSET ? (0x2ad4 + (port * 0x8)) : 0xffffffff)
#define USTORM_ETH_RING_PAUSE_DATA_OFFSET(port, clientId) \
- (IS_E1H_OFFSET ? (0x8020 + (port * 0x4b0) + (clientId * 0x30)) : \
+ (IS_E1H_OFFSET ? (0x1030 + (port * 0x680) + (clientId * 0x40)) : \
0xffffffff)
#define USTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2a50 + (function * 0x8)) : (0x1d98 + \
+ (IS_E1H_OFFSET ? (0x2a50 + (function * 0x8)) : (0x1dd0 + \
(function * 0x8)))
#define USTORM_FUNCTION_MODE_OFFSET \
(IS_E1H_OFFSET ? 0x2448 : 0xffffffff)
-#define USTORM_HC_BTR_OFFSET(port) \
- (IS_E1H_OFFSET ? (0x9704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
-#define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
- (IS_E1H_OFFSET ? (0x8010 + (port * 0x4b0) + (clientId * 0x30)) : \
- (0x5328 + (port * 0x260) + (clientId * 0x20)))
-#define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2408 + (function * 0x8)) : (0x5308 + \
+#define USTORM_ISCSI_CQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7044 + (function * 0x8)) : (0x2414 + \
(function * 0x8)))
-#define USTORM_PAUSE_ENABLED_OFFSET(port) \
- (IS_E1H_OFFSET ? (0x2ad4 + (port * 0x8)) : 0xffffffff)
+#define USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7046 + (function * 0x8)) : (0x2416 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_ERROR_BITMAP_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7688 + (function * 0x8)) : (0x29c8 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7648 + (function * 0x8)) : (0x29b8 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_NUM_OF_TASKS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7004 + (function * 0x8)) : (0x2404 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7002 + (function * 0x8)) : (0x2402 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_PAGE_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7000 + (function * 0x8)) : (0x2400 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_R2TQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7040 + (function * 0x8)) : (0x2410 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_RQ_BUFFER_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7080 + (function * 0x8)) : (0x2420 + \
+ (function * 0x8)))
+#define USTORM_ISCSI_RQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x7084 + (function * 0x8)) : (0x2424 + \
+ (function * 0x8)))
+#define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
+ (IS_E1H_OFFSET ? (0x1018 + (port * 0x680) + (clientId * 0x40)) : \
+ (0x4018 + (port * 0x360) + (clientId * 0x30)))
+#define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x2408 + (function * 0x8)) : (0x1da8 + \
+ (function * 0x8)))
#define USTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
(IS_E1H_OFFSET ? (0x2450 + (port * 0x2d0) + (stats_counter_id * \
- 0x28)) : (0x4740 + (port * 0x2d0) + (stats_counter_id * 0x28)))
+ 0x28)) : (0x1500 + (port * 0x2d0) + (stats_counter_id * 0x28)))
#define USTORM_RX_PRODS_OFFSET(port, client_id) \
- (IS_E1H_OFFSET ? (0x8000 + (port * 0x4b0) + (client_id * 0x30)) \
- : (0x5318 + (port * 0x260) + (client_id * 0x20)))
-#define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
- (IS_E1H_OFFSET ? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
- (index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
- (index * 0x4)))
-#define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
- (IS_E1H_OFFSET ? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
- (index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
- (index * 0x4)))
-#define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
- (IS_E1H_OFFSET ? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
- (0x1400 + (port * 0x280) + (cpu_id * 0x28)))
-#define USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
- (IS_E1H_OFFSET ? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
- (0x1408 + (port * 0x280) + (cpu_id * 0x28)))
+ (IS_E1H_OFFSET ? (0x1000 + (port * 0x680) + (client_id * 0x40)) \
+ : (0x4000 + (port * 0x360) + (client_id * 0x30)))
#define USTORM_STATS_FLAGS_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x29f0 + (function * 0x8)) : (0x1d80 + \
+ (IS_E1H_OFFSET ? (0x29f0 + (function * 0x8)) : (0x1db8 + \
(function * 0x8)))
+#define USTORM_TPA_BTR_OFFSET (IS_E1H_OFFSET ? 0x3da5 : 0x5095)
+#define USTORM_TPA_BTR_SIZE 0x1
#define XSTORM_ASSERT_LIST_INDEX_OFFSET \
(IS_E1H_OFFSET ? 0x9000 : 0x1000)
#define XSTORM_ASSERT_LIST_OFFSET(idx) \
(IS_E1H_OFFSET ? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
#define XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) \
- (IS_E1H_OFFSET ? (0x24a8 + (port * 0x50)) : (0x3ba0 + (port * 0x50)))
+ (IS_E1H_OFFSET ? (0x24a8 + (port * 0x50)) : (0x3a80 + (port * 0x50)))
#define XSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
(IS_E1H_OFFSET ? (0xa01a + ((function>>1) * 0x28) + \
((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
@@ -165,22 +272,73 @@
(IS_E1H_OFFSET ? (0xa008 + ((function>>1) * 0x28) + \
((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
#define XSTORM_E1HOV_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2c10 + (function * 0x2)) : 0xffffffff)
+ (IS_E1H_OFFSET ? (0x2c10 + (function * 0x8)) : 0xffffffff)
#define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2418 + (function * 0x8)) : (0x3b70 + \
+ (IS_E1H_OFFSET ? (0x2418 + (function * 0x8)) : (0x3a50 + \
(function * 0x8)))
#define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2588 + (function * 0x90)) : (0x3c80 + \
+ (IS_E1H_OFFSET ? (0x2588 + (function * 0x90)) : (0x3b60 + \
(function * 0x90)))
#define XSTORM_FUNCTION_MODE_OFFSET \
- (IS_E1H_OFFSET ? 0x2c20 : 0xffffffff)
+ (IS_E1H_OFFSET ? 0x2c50 : 0xffffffff)
#define XSTORM_HC_BTR_OFFSET(port) \
(IS_E1H_OFFSET ? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define XSTORM_ISCSI_HQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x80c0 + (function * 0x8)) : (0x1c30 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_MAC_ADDR0_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8080 + (function * 0x8)) : (0x1c20 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8081 + (function * 0x8)) : (0x1c21 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8082 + (function * 0x8)) : (0x1c22 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8083 + (function * 0x8)) : (0x1c23 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8084 + (function * 0x8)) : (0x1c24 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8085 + (function * 0x8)) : (0x1c25 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_LOCAL_VLAN_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8086 + (function * 0x8)) : (0x1c26 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_NUM_OF_TASKS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8004 + (function * 0x8)) : (0x1c04 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8002 + (function * 0x8)) : (0x1c02 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_PAGE_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8000 + (function * 0x8)) : (0x1c00 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_R2TQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x80c4 + (function * 0x8)) : (0x1c34 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_SQ_SIZE_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x80c2 + (function * 0x8)) : (0x1c32 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_TCP_VARS_ADV_WND_SCL_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8043 + (function * 0x8)) : (0x1c13 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8042 + (function * 0x8)) : (0x1c12 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_TCP_VARS_TOS_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8041 + (function * 0x8)) : (0x1c11 + \
+ (function * 0x8)))
+#define XSTORM_ISCSI_TCP_VARS_TTL_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x8040 + (function * 0x8)) : (0x1c10 + \
+ (function * 0x8)))
#define XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
- (IS_E1H_OFFSET ? (0xc000 + (port * 0x3f0) + (stats_counter_id * \
- 0x38)) : (0x3378 + (port * 0x3f0) + (stats_counter_id * 0x38)))
+ (IS_E1H_OFFSET ? (0xc000 + (port * 0x360) + (stats_counter_id * \
+ 0x30)) : (0x3378 + (port * 0x360) + (stats_counter_id * 0x30)))
#define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x2548 + (function * 0x90)) : (0x3c40 + \
+ (IS_E1H_OFFSET ? (0x2548 + (function * 0x90)) : (0x3b20 + \
(function * 0x90)))
#define XSTORM_SPQ_PAGE_BASE_OFFSET(function) \
(IS_E1H_OFFSET ? (0x2000 + (function * 0x10)) : (0x3328 + \
@@ -189,8 +347,15 @@
(IS_E1H_OFFSET ? (0x2008 + (function * 0x10)) : (0x3330 + \
(function * 0x10)))
#define XSTORM_STATS_FLAGS_OFFSET(function) \
- (IS_E1H_OFFSET ? (0x23d8 + (function * 0x8)) : (0x3b60 + \
+ (IS_E1H_OFFSET ? (0x23d8 + (function * 0x8)) : (0x3a40 + \
(function * 0x8)))
+#define XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_ENABLED_OFFSET(port) \
+ (IS_E1H_OFFSET ? (0x4000 + (port * 0x8)) : (0x1960 + (port * 0x8)))
+#define XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_MAX_COUNT_OFFSET(port) \
+ (IS_E1H_OFFSET ? (0x4001 + (port * 0x8)) : (0x1961 + (port * 0x8)))
+#define XSTORM_TCP_TX_SWS_TIMER_VAL_OFFSET(function) \
+ (IS_E1H_OFFSET ? (0x4060 + ((function>>1) * 0x8) + ((function&1) \
+ * 0x4)) : (0x1978 + (function * 0x4)))
#define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
/**
@@ -211,6 +376,9 @@
#define TCP_IPV4_HASH_TYPE 2
#define IPV6_HASH_TYPE 3
#define TCP_IPV6_HASH_TYPE 4
+#define VLAN_PRI_HASH_TYPE 5
+#define E1HOV_PRI_HASH_TYPE 6
+#define DSCP_HASH_TYPE 7
/* Ethernet Ring parameters */
@@ -218,30 +386,26 @@
#define FIRST_BD_IN_PKT 0
#define PARSE_BD_INDEX 1
#define NUM_OF_ETH_BDS_IN_PAGE ((PAGE_SIZE)/(STRUCT_SIZE(eth_tx_bd)/8))
-
+#define U_ETH_NUM_OF_SGES_TO_FETCH 8
+#define U_ETH_MAX_SGES_FOR_PACKET 3
/* Rx ring params */
-#define U_ETH_LOCAL_BD_RING_SIZE 16
-#define U_ETH_LOCAL_SGE_RING_SIZE 12
+#define U_ETH_LOCAL_BD_RING_SIZE 8
+#define U_ETH_LOCAL_SGE_RING_SIZE 10
#define U_ETH_SGL_SIZE 8
-#define U_ETH_BDS_PER_PAGE_MASK \
- ((PAGE_SIZE/(STRUCT_SIZE(eth_rx_bd)/8))-1)
-#define U_ETH_CQE_PER_PAGE_MASK \
- ((PAGE_SIZE/(STRUCT_SIZE(eth_rx_cqe)/8))-1)
-#define U_ETH_SGES_PER_PAGE_MASK \
- ((PAGE_SIZE/(STRUCT_SIZE(eth_rx_sge)/8))-1)
-
#define U_ETH_SGES_PER_PAGE_INVERSE_MASK \
(0xFFFF - ((PAGE_SIZE/((STRUCT_SIZE(eth_rx_sge))/8))-1))
-
-#define TU_ETH_CQES_PER_PAGE \
- (PAGE_SIZE/(STRUCT_SIZE(eth_rx_cqe_next_page)/8))
+#define TU_ETH_CQES_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_cqe)/8))
#define U_ETH_BDS_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_bd)/8))
#define U_ETH_SGES_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_sge)/8))
+#define U_ETH_BDS_PER_PAGE_MASK (U_ETH_BDS_PER_PAGE-1)
+#define U_ETH_CQE_PER_PAGE_MASK (TU_ETH_CQES_PER_PAGE-1)
+#define U_ETH_SGES_PER_PAGE_MASK (U_ETH_SGES_PER_PAGE-1)
+
#define U_ETH_UNDEFINED_Q 0xFF
/* values of command IDs in the ramrod message */
@@ -266,8 +430,8 @@
#define T_ETH_CRC32_HASH_SEED 0x00000000
/* Maximal L2 clients supported */
-#define ETH_MAX_RX_CLIENTS_E1 19
-#define ETH_MAX_RX_CLIENTS_E1H 25
+#define ETH_MAX_RX_CLIENTS_E1 18
+#define ETH_MAX_RX_CLIENTS_E1H 26
/* Maximal aggregation queues supported */
#define ETH_MAX_AGGREGATION_QUEUES_E1 32
@@ -276,6 +440,9 @@
/* ETH RSS modes */
#define ETH_RSS_MODE_DISABLED 0
#define ETH_RSS_MODE_REGULAR 1
+#define ETH_RSS_MODE_VLAN_PRI 2
+#define ETH_RSS_MODE_E1HOV_PRI 3
+#define ETH_RSS_MODE_IP_DSCP 4
/**
@@ -332,12 +499,14 @@
#define HC_INDEX_DEF_C_ETH_SLOW_PATH 3
#define HC_INDEX_DEF_C_ETH_RDMA_CQ_CONS 4
#define HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS 5
+#define HC_INDEX_DEF_C_ETH_FCOE_CQ_CONS 6
#define HC_INDEX_DEF_U_ETH_RDMA_RX_CQ_CONS 0
#define HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS 1
#define HC_INDEX_DEF_U_ETH_RDMA_RX_BD_CONS 2
#define HC_INDEX_DEF_U_ETH_ISCSI_RX_BD_CONS 3
-
+#define HC_INDEX_DEF_U_ETH_FCOE_RX_CQ_CONS 4
+#define HC_INDEX_DEF_U_ETH_FCOE_RX_BD_CONS 5
/* used by the driver to get the SB offset */
#define USTORM_ID 0
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 03c6242..8e2261f 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -91,6 +91,21 @@
#define SHARED_HW_CFG_HIDE_PORT1 0x00002000
+ /* The fan failure mechanism is usually related to the PHY type
+ since the power consumption of the board is determined by the PHY.
+ Currently, fan is required for most designs with SFX7101, BCM8727
+ and BCM8481. If a fan is not required for a board which uses one
+ of those PHYs, this field should be set to "Disabled". If a fan is
+ required for a different PHY type, this option should be set to
+ "Enabled".
+ The fan failure indication is expected on
+ SPIO5 */
+#define SHARED_HW_CFG_FAN_FAILURE_MASK 0x00180000
+#define SHARED_HW_CFG_FAN_FAILURE_SHIFT 19
+#define SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE 0x00000000
+#define SHARED_HW_CFG_FAN_FAILURE_DISABLED 0x00080000
+#define SHARED_HW_CFG_FAN_FAILURE_ENABLED 0x00100000
+
u32 power_dissipated; /* 0x11c */
#define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000
#define SHARED_HW_CFG_POWER_DIS_CMN_SHIFT 24
@@ -233,6 +248,8 @@
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726 0x00000600
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 0x00000900
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC 0x00000a00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00
@@ -343,10 +360,16 @@
#define PORT_FEATURE_MBA_ENABLED 0x02000000
#define PORT_FEATURE_MFW_ENABLED 0x04000000
- /* Check the optic vendor via i2c before allowing it to be used by
- SW */
-#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLED 0x00000000
-#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED 0x08000000
+ /* Reserved bits: 28-29 */
+ /* Check the optic vendor via i2c against a list of approved modules
+ in a separate nvram image */
+#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK 0xE0000000
+#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_SHIFT 29
+#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT 0x00000000
+#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER 0x20000000
+#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG 0x40000000
+#define PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN 0x60000000
+
u32 wol_config;
/* Default is used when driver sets to "auto" mode */
@@ -635,6 +658,8 @@
#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000
#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000
#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
+#define DRV_MSG_CODE_DCC_OK 0x30000000
+#define DRV_MSG_CODE_DCC_FAILURE 0x31000000
#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000
#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000
#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000
@@ -642,6 +667,12 @@
#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000
#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
+ /*
+ * The optic module verification commands requris bootcode
+ * v5.0.6 or later
+ */
+#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000
+#define REQ_BC_VER_4_VRFY_OPT_MDL 0x00050006
#define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000
#define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000
@@ -663,6 +694,7 @@
#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000
#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000
#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000
+#define FW_MSG_CODE_DCC_DONE 0x30100000
#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000
#define FW_MSG_CODE_DIAG_REFUSE 0x50200000
#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000
@@ -676,6 +708,9 @@
#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000
#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000
#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000
+#define FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS 0xa0100000
+#define FW_MSG_CODE_VRFY_OPT_MDL_INVLD_IMG 0xa0200000
+#define FW_MSG_CODE_VRFY_OPT_MDL_UNAPPROVED 0xa0300000
#define FW_MSG_CODE_LIC_CHALLENGE 0xff010000
#define FW_MSG_CODE_LIC_RESPONSE 0xff020000
@@ -710,6 +745,14 @@
u32 drv_status;
#define DRV_STATUS_PMF 0x00000001
+#define DRV_STATUS_DCC_EVENT_MASK 0x0000ff00
+#define DRV_STATUS_DCC_DISABLE_ENABLE_PF 0x00000100
+#define DRV_STATUS_DCC_BANDWIDTH_ALLOCATION 0x00000200
+#define DRV_STATUS_DCC_CHANGE_MAC_ADDRESS 0x00000400
+#define DRV_STATUS_DCC_RESERVED1 0x00000800
+#define DRV_STATUS_DCC_SET_PROTOCOL 0x00001000
+#define DRV_STATUS_DCC_SET_PRIORITY 0x00002000
+
u32 virt_mac_upper;
#define VIRT_MAC_SIGN_MASK 0xffff0000
#define VIRT_MAC_SIGNATURE 0x564d0000
@@ -746,10 +789,9 @@
struct port_mf_cfg {
u32 dynamic_cfg; /* device control channel */
-#define PORT_MF_CFG_OUTER_VLAN_TAG_MASK 0x0000ffff
-#define PORT_MF_CFG_OUTER_VLAN_TAG_SHIFT 0
-#define PORT_MF_CFG_DYNAMIC_CFG_ENABLED 0x00010000
-#define PORT_MF_CFG_DYNAMIC_CFG_DEFAULT 0x00000000
+#define PORT_MF_CFG_E1HOV_TAG_MASK 0x0000ffff
+#define PORT_MF_CFG_E1HOV_TAG_SHIFT 0
+#define PORT_MF_CFG_E1HOV_TAG_DEFAULT PORT_MF_CFG_E1HOV_TAG_MASK
u32 reserved[3];
@@ -853,6 +895,22 @@
}; /* 0x6dc */
+struct shmem2_region {
+
+ u32 size;
+
+ u32 dcc_support;
+#define SHMEM_DCC_SUPPORT_NONE 0x00000000
+#define SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV 0x00000001
+#define SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV 0x00000004
+#define SHMEM_DCC_SUPPORT_CHANGE_MAC_ADDRESS_TLV 0x00000008
+#define SHMEM_DCC_SUPPORT_SET_PROTOCOL_TLV 0x00000040
+#define SHMEM_DCC_SUPPORT_SET_PRIORITY_TLV 0x00000080
+#define SHMEM_DCC_SUPPORT_DEFAULT SHMEM_DCC_SUPPORT_NONE
+
+};
+
+
struct emac_stats {
u32 rx_stat_ifhcinoctets;
u32 rx_stat_ifhcinbadoctets;
@@ -1186,9 +1244,9 @@
};
-#define BCM_5710_FW_MAJOR_VERSION 4
-#define BCM_5710_FW_MINOR_VERSION 8
-#define BCM_5710_FW_REVISION_VERSION 53
+#define BCM_5710_FW_MAJOR_VERSION 5
+#define BCM_5710_FW_MINOR_VERSION 0
+#define BCM_5710_FW_REVISION_VERSION 21
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
@@ -1238,6 +1296,22 @@
/*
+ * doorbell message sent to the chip
+ */
+struct doorbell_set_prod {
+#if defined(__BIG_ENDIAN)
+ u16 prod;
+ u8 zero_fill1;
+ struct doorbell_hdr header;
+#elif defined(__LITTLE_ENDIAN)
+ struct doorbell_hdr header;
+ u8 zero_fill1;
+ u16 prod;
+#endif
+};
+
+
+/*
* IGU driver acknowledgement register
*/
struct igu_ack_register {
@@ -1272,6 +1346,62 @@
/*
+ * IGU driver acknowledgement register
+ */
+struct igu_backward_compatible {
+ u32 sb_id_and_flags;
+#define IGU_BACKWARD_COMPATIBLE_SB_INDEX (0xFFFF<<0)
+#define IGU_BACKWARD_COMPATIBLE_SB_INDEX_SHIFT 0
+#define IGU_BACKWARD_COMPATIBLE_SB_SELECT (0x1F<<16)
+#define IGU_BACKWARD_COMPATIBLE_SB_SELECT_SHIFT 16
+#define IGU_BACKWARD_COMPATIBLE_SEGMENT_ACCESS (0x7<<21)
+#define IGU_BACKWARD_COMPATIBLE_SEGMENT_ACCESS_SHIFT 21
+#define IGU_BACKWARD_COMPATIBLE_BUPDATE (0x1<<24)
+#define IGU_BACKWARD_COMPATIBLE_BUPDATE_SHIFT 24
+#define IGU_BACKWARD_COMPATIBLE_ENABLE_INT (0x3<<25)
+#define IGU_BACKWARD_COMPATIBLE_ENABLE_INT_SHIFT 25
+#define IGU_BACKWARD_COMPATIBLE_RESERVED_0 (0x1F<<27)
+#define IGU_BACKWARD_COMPATIBLE_RESERVED_0_SHIFT 27
+ u32 reserved_2;
+};
+
+
+/*
+ * IGU driver acknowledgement register
+ */
+struct igu_regular {
+ u32 sb_id_and_flags;
+#define IGU_REGULAR_SB_INDEX (0xFFFFF<<0)
+#define IGU_REGULAR_SB_INDEX_SHIFT 0
+#define IGU_REGULAR_RESERVED0 (0x1<<20)
+#define IGU_REGULAR_RESERVED0_SHIFT 20
+#define IGU_REGULAR_SEGMENT_ACCESS (0x7<<21)
+#define IGU_REGULAR_SEGMENT_ACCESS_SHIFT 21
+#define IGU_REGULAR_BUPDATE (0x1<<24)
+#define IGU_REGULAR_BUPDATE_SHIFT 24
+#define IGU_REGULAR_ENABLE_INT (0x3<<25)
+#define IGU_REGULAR_ENABLE_INT_SHIFT 25
+#define IGU_REGULAR_RESERVED_1 (0x1<<27)
+#define IGU_REGULAR_RESERVED_1_SHIFT 27
+#define IGU_REGULAR_CLEANUP_TYPE (0x3<<28)
+#define IGU_REGULAR_CLEANUP_TYPE_SHIFT 28
+#define IGU_REGULAR_CLEANUP_SET (0x1<<30)
+#define IGU_REGULAR_CLEANUP_SET_SHIFT 30
+#define IGU_REGULAR_BCLEANUP (0x1<<31)
+#define IGU_REGULAR_BCLEANUP_SHIFT 31
+ u32 reserved_2;
+};
+
+/*
+ * IGU driver acknowledgement register
+ */
+union igu_consprod_reg {
+ struct igu_regular regular;
+ struct igu_backward_compatible backward_compatible;
+};
+
+
+/*
* Parser parsing flags field
*/
struct parsing_flags {
@@ -1402,12 +1532,10 @@
#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_DYNAMIC_HC_SHIFT 1
#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA (0x1<<2)
#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA_SHIFT 2
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING (0x1<<3)
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING_SHIFT 3
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS (0x1<<4)
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS_SHIFT 4
-#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0 (0x7<<5)
-#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0_SHIFT 5
+#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS (0x1<<3)
+#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS_SHIFT 3
+#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0 (0xF<<4)
+#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0_SHIFT 4
u8 status_block_id;
u8 clientId;
u8 sb_index_numbers;
@@ -1430,12 +1558,10 @@
#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_DYNAMIC_HC_SHIFT 1
#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA (0x1<<2)
#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA_SHIFT 2
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING (0x1<<3)
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING_SHIFT 3
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS (0x1<<4)
-#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS_SHIFT 4
-#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0 (0x7<<5)
-#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0_SHIFT 5
+#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS (0x1<<3)
+#define USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS_SHIFT 3
+#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0 (0xF<<4)
+#define __USTORM_ETH_ST_CONTEXT_CONFIG_RESERVED0_SHIFT 4
#endif
#if defined(__BIG_ENDIAN)
u16 bd_buff_size;
@@ -1455,11 +1581,36 @@
u8 __local_bd_prod;
u8 __local_sge_prod;
#endif
- u32 reserved;
+#if defined(__BIG_ENDIAN)
+ u16 __sdm_bd_expected_counter;
+ u8 cstorm_agg_int;
+ u8 __expected_bds_on_ram;
+#elif defined(__LITTLE_ENDIAN)
+ u8 __expected_bds_on_ram;
+ u8 cstorm_agg_int;
+ u16 __sdm_bd_expected_counter;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 __ring_data_ram_addr;
+ u16 __hc_cstorm_ram_addr;
+#elif defined(__LITTLE_ENDIAN)
+ u16 __hc_cstorm_ram_addr;
+ u16 __ring_data_ram_addr;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 reserved1;
+ u8 max_sges_for_packet;
+ u16 __bd_ring_ram_addr;
+#elif defined(__LITTLE_ENDIAN)
+ u16 __bd_ring_ram_addr;
+ u8 max_sges_for_packet;
+ u8 reserved1;
+#endif
u32 bd_page_base_lo;
u32 bd_page_base_hi;
u32 sge_page_base_lo;
u32 sge_page_base_hi;
+ struct regpair reserved2;
};
/*
@@ -1482,8 +1633,8 @@
* Local BDs and SGEs rings (in ETH)
*/
struct eth_local_rx_rings {
- struct eth_rx_bd __local_bd_ring[16];
- struct eth_rx_sge __local_sge_ring[12];
+ struct eth_rx_bd __local_bd_ring[8];
+ struct eth_rx_sge __local_sge_ring[10];
};
/*
@@ -1575,13 +1726,13 @@
*/
struct xstorm_eth_ag_context {
#if defined(__BIG_ENDIAN)
- u16 __bd_prod;
+ u16 agg_val1;
u8 __agg_vars1;
u8 __state;
#elif defined(__LITTLE_ENDIAN)
u8 __state;
u8 __agg_vars1;
- u16 __bd_prod;
+ u16 agg_val1;
#endif
#if defined(__BIG_ENDIAN)
u8 cdu_reserved;
@@ -1594,7 +1745,7 @@
u8 __agg_vars4;
u8 cdu_reserved;
#endif
- u32 __more_packets_to_send;
+ u32 __bd_prod;
#if defined(__BIG_ENDIAN)
u16 __agg_vars5;
u16 __agg_val4_th;
@@ -1860,8 +2011,8 @@
#define ETH_TX_BD_FLAGS_VLAN_TAG_SHIFT 0
#define ETH_TX_BD_FLAGS_IP_CSUM (0x1<<1)
#define ETH_TX_BD_FLAGS_IP_CSUM_SHIFT 1
-#define ETH_TX_BD_FLAGS_TCP_CSUM (0x1<<2)
-#define ETH_TX_BD_FLAGS_TCP_CSUM_SHIFT 2
+#define ETH_TX_BD_FLAGS_L4_CSUM (0x1<<2)
+#define ETH_TX_BD_FLAGS_L4_CSUM_SHIFT 2
#define ETH_TX_BD_FLAGS_END_BD (0x1<<3)
#define ETH_TX_BD_FLAGS_END_BD_SHIFT 3
#define ETH_TX_BD_FLAGS_START_BD (0x1<<4)
@@ -1877,7 +2028,7 @@
/*
* The eth Tx Buffer Descriptor
*/
-struct eth_tx_bd {
+struct eth_tx_start_bd {
__le32 addr_lo;
__le32 addr_hi;
__le16 nbd;
@@ -1885,10 +2036,21 @@
__le16 vlan;
struct eth_tx_bd_flags bd_flags;
u8 general_data;
-#define ETH_TX_BD_HDR_NBDS (0x3F<<0)
-#define ETH_TX_BD_HDR_NBDS_SHIFT 0
-#define ETH_TX_BD_ETH_ADDR_TYPE (0x3<<6)
-#define ETH_TX_BD_ETH_ADDR_TYPE_SHIFT 6
+#define ETH_TX_START_BD_HDR_NBDS (0x3F<<0)
+#define ETH_TX_START_BD_HDR_NBDS_SHIFT 0
+#define ETH_TX_START_BD_ETH_ADDR_TYPE (0x3<<6)
+#define ETH_TX_START_BD_ETH_ADDR_TYPE_SHIFT 6
+};
+
+/*
+ * Tx regular BD structure
+ */
+struct eth_tx_bd {
+ u32 addr_lo;
+ u32 addr_hi;
+ u16 total_pkt_bytes;
+ u16 nbytes;
+ u8 reserved[4];
};
/*
@@ -1898,8 +2060,8 @@
u8 global_data;
#define ETH_TX_PARSE_BD_IP_HDR_START_OFFSET (0xF<<0)
#define ETH_TX_PARSE_BD_IP_HDR_START_OFFSET_SHIFT 0
-#define ETH_TX_PARSE_BD_CS_ANY_FLG (0x1<<4)
-#define ETH_TX_PARSE_BD_CS_ANY_FLG_SHIFT 4
+#define ETH_TX_PARSE_BD_UDP_CS_FLG (0x1<<4)
+#define ETH_TX_PARSE_BD_UDP_CS_FLG_SHIFT 4
#define ETH_TX_PARSE_BD_PSEUDO_CS_WITHOUT_LEN (0x1<<5)
#define ETH_TX_PARSE_BD_PSEUDO_CS_WITHOUT_LEN_SHIFT 5
#define ETH_TX_PARSE_BD_LLC_SNAP_EN (0x1<<6)
@@ -1924,10 +2086,10 @@
#define ETH_TX_PARSE_BD_CWR_FLG (0x1<<7)
#define ETH_TX_PARSE_BD_CWR_FLG_SHIFT 7
u8 ip_hlen;
- s8 cs_offset;
+ s8 reserved;
__le16 total_hlen;
- __le16 lso_mss;
__le16 tcp_pseudo_csum;
+ __le16 lso_mss;
__le16 ip_id;
__le32 tcp_send_seq;
};
@@ -1936,15 +2098,16 @@
* The last BD in the BD memory will hold a pointer to the next BD memory
*/
struct eth_tx_next_bd {
- u32 addr_lo;
- u32 addr_hi;
+ __le32 addr_lo;
+ __le32 addr_hi;
u8 reserved[8];
};
/*
- * union for 3 Bd types
+ * union for 4 Bd types
*/
union eth_tx_bd_types {
+ struct eth_tx_start_bd start_bd;
struct eth_tx_bd reg_bd;
struct eth_tx_parse_bd parse_bd;
struct eth_tx_next_bd next_bd;
@@ -1973,11 +2136,35 @@
#define XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE_SHIFT 7
u16 tx_bd_cons;
#endif
- u32 db_data_addr_lo;
- u32 db_data_addr_hi;
- u32 __pkt_cons;
- u32 __gso_next;
- u32 is_eth_conn_1b;
+ u32 __reserved1;
+ u32 __reserved2;
+#if defined(__BIG_ENDIAN)
+ u8 __ram_cache_index;
+ u8 __double_buffer_client;
+ u16 __pkt_cons;
+#elif defined(__LITTLE_ENDIAN)
+ u16 __pkt_cons;
+ u8 __double_buffer_client;
+ u8 __ram_cache_index;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 __statistics_address;
+ u16 __gso_next;
+#elif defined(__LITTLE_ENDIAN)
+ u16 __gso_next;
+ u16 __statistics_address;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 __local_tx_bd_cons;
+ u8 safc_group_num;
+ u8 safc_group_en;
+ u8 __is_eth_conn;
+#elif defined(__LITTLE_ENDIAN)
+ u8 __is_eth_conn;
+ u8 safc_group_en;
+ u8 safc_group_num;
+ u8 __local_tx_bd_cons;
+#endif
union eth_tx_bd_types __bds[13];
};
@@ -2042,9 +2229,9 @@
/*
- * ustorm status block
+ * cstorm default status block, generated by ustorm
*/
-struct ustorm_def_status_block {
+struct cstorm_def_status_block_u {
__le16 index_values[HC_USTORM_DEF_SB_NUM_INDICES];
__le16 status_block_index;
u8 func;
@@ -2053,9 +2240,9 @@
};
/*
- * cstorm status block
+ * cstorm default status block, generated by cstorm
*/
-struct cstorm_def_status_block {
+struct cstorm_def_status_block_c {
__le16 index_values[HC_CSTORM_DEF_SB_NUM_INDICES];
__le16 status_block_index;
u8 func;
@@ -2090,17 +2277,17 @@
*/
struct host_def_status_block {
struct atten_def_status_block atten_status_block;
- struct ustorm_def_status_block u_def_status_block;
- struct cstorm_def_status_block c_def_status_block;
+ struct cstorm_def_status_block_u u_def_status_block;
+ struct cstorm_def_status_block_c c_def_status_block;
struct xstorm_def_status_block x_def_status_block;
struct tstorm_def_status_block t_def_status_block;
};
/*
- * ustorm status block
+ * cstorm status block, generated by ustorm
*/
-struct ustorm_status_block {
+struct cstorm_status_block_u {
__le16 index_values[HC_USTORM_SB_NUM_INDICES];
__le16 status_block_index;
u8 func;
@@ -2109,9 +2296,9 @@
};
/*
- * cstorm status block
+ * cstorm status block, generated by cstorm
*/
-struct cstorm_status_block {
+struct cstorm_status_block_c {
__le16 index_values[HC_CSTORM_SB_NUM_INDICES];
__le16 status_block_index;
u8 func;
@@ -2123,8 +2310,8 @@
* host status block
*/
struct host_status_block {
- struct ustorm_status_block u_status_block;
- struct cstorm_status_block c_status_block;
+ struct cstorm_status_block_u u_status_block;
+ struct cstorm_status_block_c c_status_block;
};
@@ -2140,15 +2327,6 @@
/*
- * L2 dynamic host coalescing init parameters
- */
-struct eth_dynamic_hc_config {
- u32 threshold[3];
- u8 hc_timeout[4];
-};
-
-
-/*
* regular eth FP CQE parameters struct
*/
struct eth_fast_path_rx_cqe {
@@ -2312,12 +2490,10 @@
/*
- * doorbell data in host memory
+ * array of 13 bds as appears in the eth xstorm context
*/
-struct eth_tx_db_data {
- __le32 packets_prod;
- __le16 bds_prod;
- __le16 reserved;
+struct eth_tx_bds_array {
+ union eth_tx_bd_types bds[13];
};
@@ -2345,8 +2521,10 @@
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_IN_CAM_SHIFT 8
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM (0x1<<9)
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM_SHIFT 9
-#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0x3F<<10)
-#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 10
+#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA (0x1<<10)
+#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA_SHIFT 10
+#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0x1F<<11)
+#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 11
#elif defined(__LITTLE_ENDIAN)
u16 config_flags;
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY (0x1<<0)
@@ -2365,8 +2543,10 @@
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_IN_CAM_SHIFT 8
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM (0x1<<9)
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM_SHIFT 9
-#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0x3F<<10)
-#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 10
+#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA (0x1<<10)
+#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA_SHIFT 10
+#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0x1F<<11)
+#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 11
u8 rss_result_mask;
u8 leading_client_id;
#endif
@@ -2374,11 +2554,38 @@
};
/*
+ * RSS idirection table update configuration
+ */
+struct rss_update_config {
+#if defined(__BIG_ENDIAN)
+ u16 toe_rss_bitmap;
+ u16 flags;
+#define RSS_UPDATE_CONFIG_ETH_UPDATE_ENABLE (0x1<<0)
+#define RSS_UPDATE_CONFIG_ETH_UPDATE_ENABLE_SHIFT 0
+#define RSS_UPDATE_CONFIG_TOE_UPDATE_ENABLE (0x1<<1)
+#define RSS_UPDATE_CONFIG_TOE_UPDATE_ENABLE_SHIFT 1
+#define __RSS_UPDATE_CONFIG_RESERVED0 (0x3FFF<<2)
+#define __RSS_UPDATE_CONFIG_RESERVED0_SHIFT 2
+#elif defined(__LITTLE_ENDIAN)
+ u16 flags;
+#define RSS_UPDATE_CONFIG_ETH_UPDATE_ENABLE (0x1<<0)
+#define RSS_UPDATE_CONFIG_ETH_UPDATE_ENABLE_SHIFT 0
+#define RSS_UPDATE_CONFIG_TOE_UPDATE_ENABLE (0x1<<1)
+#define RSS_UPDATE_CONFIG_TOE_UPDATE_ENABLE_SHIFT 1
+#define __RSS_UPDATE_CONFIG_RESERVED0 (0x3FFF<<2)
+#define __RSS_UPDATE_CONFIG_RESERVED0_SHIFT 2
+ u16 toe_rss_bitmap;
+#endif
+ u32 reserved1;
+};
+
+/*
* parameters for eth update ramrod
*/
struct eth_update_ramrod_data {
struct tstorm_eth_function_common_config func_config;
u8 indirectionTable[128];
+ struct rss_update_config rss_config;
};
@@ -2423,8 +2630,9 @@
#define TSTORM_CAM_TARGET_TABLE_ENTRY_RDMA_MAC_SHIFT 3
#define TSTORM_CAM_TARGET_TABLE_ENTRY_RESERVED0 (0xF<<4)
#define TSTORM_CAM_TARGET_TABLE_ENTRY_RESERVED0_SHIFT 4
- u8 client_id;
+ u8 reserved1;
u16 vlan_id;
+ u32 clients_bit_vector;
};
/*
@@ -2453,7 +2661,7 @@
__le16 msb_mac_addr;
__le16 vlan_id;
__le16 e1hov_id;
- u8 client_id;
+ u8 reserved0;
u8 flags;
#define MAC_CONFIGURATION_ENTRY_E1H_PORT (0x1<<0)
#define MAC_CONFIGURATION_ENTRY_E1H_PORT_SHIFT 0
@@ -2461,8 +2669,9 @@
#define MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE_SHIFT 1
#define MAC_CONFIGURATION_ENTRY_E1H_RDMA_MAC (0x1<<2)
#define MAC_CONFIGURATION_ENTRY_E1H_RDMA_MAC_SHIFT 2
-#define MAC_CONFIGURATION_ENTRY_E1H_RESERVED0 (0x1F<<3)
-#define MAC_CONFIGURATION_ENTRY_E1H_RESERVED0_SHIFT 3
+#define MAC_CONFIGURATION_ENTRY_E1H_RESERVED1 (0x1F<<3)
+#define MAC_CONFIGURATION_ENTRY_E1H_RESERVED1_SHIFT 3
+ u32 clients_bit_vector;
};
/*
@@ -2487,13 +2696,13 @@
*/
struct tstorm_eth_client_config {
#if defined(__BIG_ENDIAN)
- u8 max_sges_for_packet;
+ u8 reserved0;
u8 statistics_counter_id;
u16 mtu;
#elif defined(__LITTLE_ENDIAN)
u16 mtu;
u8 statistics_counter_id;
- u8 max_sges_for_packet;
+ u8 reserved0;
#endif
#if defined(__BIG_ENDIAN)
u16 drop_flags;
@@ -2505,8 +2714,8 @@
#define TSTORM_ETH_CLIENT_CONFIG_DROP_TTL0_SHIFT 2
#define TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR (0x1<<3)
#define TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR_SHIFT 3
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1 (0xFFF<<4)
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1_SHIFT 4
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED2 (0xFFF<<4)
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED2_SHIFT 4
u16 config_flags;
#define TSTORM_ETH_CLIENT_CONFIG_VLAN_REM_ENABLE (0x1<<0)
#define TSTORM_ETH_CLIENT_CONFIG_VLAN_REM_ENABLE_SHIFT 0
@@ -2514,10 +2723,8 @@
#define TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE_SHIFT 1
#define TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE (0x1<<2)
#define TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE_SHIFT 2
-#define TSTORM_ETH_CLIENT_CONFIG_ENABLE_SGE_RING (0x1<<3)
-#define TSTORM_ETH_CLIENT_CONFIG_ENABLE_SGE_RING_SHIFT 3
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED0 (0xFFF<<4)
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED0_SHIFT 4
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1 (0x1FFF<<3)
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1_SHIFT 3
#elif defined(__LITTLE_ENDIAN)
u16 config_flags;
#define TSTORM_ETH_CLIENT_CONFIG_VLAN_REM_ENABLE (0x1<<0)
@@ -2526,10 +2733,8 @@
#define TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE_SHIFT 1
#define TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE (0x1<<2)
#define TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE_SHIFT 2
-#define TSTORM_ETH_CLIENT_CONFIG_ENABLE_SGE_RING (0x1<<3)
-#define TSTORM_ETH_CLIENT_CONFIG_ENABLE_SGE_RING_SHIFT 3
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED0 (0xFFF<<4)
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED0_SHIFT 4
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1 (0x1FFF<<3)
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1_SHIFT 3
u16 drop_flags;
#define TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR (0x1<<0)
#define TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR_SHIFT 0
@@ -2539,8 +2744,8 @@
#define TSTORM_ETH_CLIENT_CONFIG_DROP_TTL0_SHIFT 2
#define TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR (0x1<<3)
#define TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR_SHIFT 3
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1 (0xFFF<<4)
-#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED1_SHIFT 4
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED2 (0xFFF<<4)
+#define __TSTORM_ETH_CLIENT_CONFIG_RESERVED2_SHIFT 4
#endif
};
@@ -2663,7 +2868,6 @@
u32 rs_threshold;
};
-
/*
* per-port fairness variables
*/
@@ -2673,7 +2877,6 @@
u32 fairness_timeout;
};
-
/*
* per-port SAFC variables
*/
@@ -2690,7 +2893,6 @@
u16 cos_to_pause_mask[NUM_OF_SAFC_BITS];
};
-
/*
* Per-port congestion management variables
*/
@@ -2703,11 +2905,23 @@
/*
+ * Dynamic host coalescing init parameters
+ */
+struct dynamic_hc_config {
+ u32 threshold[3];
+ u8 shift_per_protocol[HC_USTORM_SB_NUM_INDICES];
+ u8 hc_timeout0[HC_USTORM_SB_NUM_INDICES];
+ u8 hc_timeout1[HC_USTORM_SB_NUM_INDICES];
+ u8 hc_timeout2[HC_USTORM_SB_NUM_INDICES];
+ u8 hc_timeout3[HC_USTORM_SB_NUM_INDICES];
+};
+
+
+/*
* Protocol-common statistics collected by the Xstorm (per client)
*/
struct xstorm_per_client_stats {
- struct regpair total_sent_bytes;
- __le32 total_sent_pkts;
+ __le32 reserved0;
__le32 unicast_pkts_sent;
struct regpair unicast_bytes_sent;
struct regpair multicast_bytes_sent;
@@ -2715,11 +2929,10 @@
__le32 broadcast_pkts_sent;
struct regpair broadcast_bytes_sent;
__le16 stats_counter;
- __le16 reserved0;
- __le32 reserved1;
+ __le16 reserved1;
+ __le32 reserved2;
};
-
/*
* Common statistics collected by the Xstorm (per port)
*/
@@ -2727,7 +2940,6 @@
struct xstorm_per_client_stats client_statistics[MAX_X_STAT_COUNTER_ID];
};
-
/*
* Protocol-common statistics collected by the Tstorm (per port)
*/
@@ -2738,19 +2950,16 @@
__le32 mac_discard;
};
-
/*
* Protocol-common statistics collected by the Tstorm (per client)
*/
struct tstorm_per_client_stats {
- struct regpair total_rcv_bytes;
struct regpair rcv_unicast_bytes;
struct regpair rcv_broadcast_bytes;
struct regpair rcv_multicast_bytes;
struct regpair rcv_error_bytes;
__le32 checksum_discard;
__le32 packets_too_big_discard;
- __le32 total_rcv_pkts;
__le32 rcv_unicast_pkts;
__le32 rcv_broadcast_pkts;
__le32 rcv_multicast_pkts;
@@ -2758,7 +2967,6 @@
__le32 ttl0_discard;
__le16 stats_counter;
__le16 reserved0;
- __le32 reserved1;
};
/*
@@ -2861,6 +3069,15 @@
/*
+ * The send queue element
+ */
+struct protocol_common_spe {
+ struct spe_hdr hdr;
+ struct regpair phy_address;
+};
+
+
+/*
* a single rate shaping counter. can be used as protocol or vnic counter
*/
struct rate_shaping_counter {
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 3ba4d88..65b26cb 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -15,24 +15,11 @@
#ifndef BNX2X_INIT_H
#define BNX2X_INIT_H
-#define COMMON 0x1
-#define PORT0 0x2
-#define PORT1 0x4
-
-#define INIT_EMULATION 0x1
-#define INIT_FPGA 0x2
-#define INIT_ASIC 0x4
-#define INIT_HARDWARE 0x7
-
-#define TSTORM_INTMEM_ADDR TSEM_REG_FAST_MEMORY
-#define CSTORM_INTMEM_ADDR CSEM_REG_FAST_MEMORY
-#define XSTORM_INTMEM_ADDR XSEM_REG_FAST_MEMORY
-#define USTORM_INTMEM_ADDR USEM_REG_FAST_MEMORY
/* RAM0 size in bytes */
#define STORM_INTMEM_SIZE_E1 0x5800
#define STORM_INTMEM_SIZE_E1H 0x10000
-#define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1H(bp) ? STORM_INTMEM_SIZE_E1H : \
- STORM_INTMEM_SIZE_E1) / 4)
+#define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1(bp) ? STORM_INTMEM_SIZE_E1 : \
+ STORM_INTMEM_SIZE_E1H) / 4)
/* Init operation types and structures */
@@ -53,65 +40,68 @@
#define OP_WR_ASIC 0xc /* write single register on ASIC */
/* Init stages */
-#define COMMON_STAGE 0
-#define PORT0_STAGE 1
-#define PORT1_STAGE 2
-/* Never reorder FUNCx stages !!! */
-#define FUNC0_STAGE 3
-#define FUNC1_STAGE 4
-#define FUNC2_STAGE 5
-#define FUNC3_STAGE 6
-#define FUNC4_STAGE 7
-#define FUNC5_STAGE 8
-#define FUNC6_STAGE 9
-#define FUNC7_STAGE 10
-#define STAGE_IDX_MAX 11
+/* Never reorder stages !!! */
+#define COMMON_STAGE 0
+#define PORT0_STAGE 1
+#define PORT1_STAGE 2
+#define FUNC0_STAGE 3
+#define FUNC1_STAGE 4
+#define FUNC2_STAGE 5
+#define FUNC3_STAGE 6
+#define FUNC4_STAGE 7
+#define FUNC5_STAGE 8
+#define FUNC6_STAGE 9
+#define FUNC7_STAGE 10
+#define STAGE_IDX_MAX 11
-#define STAGE_START 0
-#define STAGE_END 1
+#define STAGE_START 0
+#define STAGE_END 1
/* Indices of blocks */
-#define PRS_BLOCK 0
-#define SRCH_BLOCK 1
-#define TSDM_BLOCK 2
-#define TCM_BLOCK 3
-#define BRB1_BLOCK 4
-#define TSEM_BLOCK 5
-#define PXPCS_BLOCK 6
-#define EMAC0_BLOCK 7
-#define EMAC1_BLOCK 8
-#define DBU_BLOCK 9
-#define MISC_BLOCK 10
-#define DBG_BLOCK 11
-#define NIG_BLOCK 12
-#define MCP_BLOCK 13
-#define UPB_BLOCK 14
-#define CSDM_BLOCK 15
-#define USDM_BLOCK 16
-#define CCM_BLOCK 17
-#define UCM_BLOCK 18
-#define USEM_BLOCK 19
-#define CSEM_BLOCK 20
-#define XPB_BLOCK 21
-#define DQ_BLOCK 22
-#define TIMERS_BLOCK 23
-#define XSDM_BLOCK 24
-#define QM_BLOCK 25
-#define PBF_BLOCK 26
-#define XCM_BLOCK 27
-#define XSEM_BLOCK 28
-#define CDU_BLOCK 29
-#define DMAE_BLOCK 30
-#define PXP_BLOCK 31
-#define CFC_BLOCK 32
-#define HC_BLOCK 33
-#define PXP2_BLOCK 34
-#define MISC_AEU_BLOCK 35
+#define PRS_BLOCK 0
+#define SRCH_BLOCK 1
+#define TSDM_BLOCK 2
+#define TCM_BLOCK 3
+#define BRB1_BLOCK 4
+#define TSEM_BLOCK 5
+#define PXPCS_BLOCK 6
+#define EMAC0_BLOCK 7
+#define EMAC1_BLOCK 8
+#define DBU_BLOCK 9
+#define MISC_BLOCK 10
+#define DBG_BLOCK 11
+#define NIG_BLOCK 12
+#define MCP_BLOCK 13
+#define UPB_BLOCK 14
+#define CSDM_BLOCK 15
+#define USDM_BLOCK 16
+#define CCM_BLOCK 17
+#define UCM_BLOCK 18
+#define USEM_BLOCK 19
+#define CSEM_BLOCK 20
+#define XPB_BLOCK 21
+#define DQ_BLOCK 22
+#define TIMERS_BLOCK 23
+#define XSDM_BLOCK 24
+#define QM_BLOCK 25
+#define PBF_BLOCK 26
+#define XCM_BLOCK 27
+#define XSEM_BLOCK 28
+#define CDU_BLOCK 29
+#define DMAE_BLOCK 30
+#define PXP_BLOCK 31
+#define CFC_BLOCK 32
+#define HC_BLOCK 33
+#define PXP2_BLOCK 34
+#define MISC_AEU_BLOCK 35
+#define PGLUE_B_BLOCK 36
+#define IGU_BLOCK 37
+
/* Returns the index of start or end of a specific block stage in ops array*/
#define BLOCK_OPS_IDX(block, stage, end) \
- (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
+ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
struct raw_op {
@@ -158,199 +148,5 @@
struct raw_op raw;
};
-/****************************************************************************
-* PXP
-****************************************************************************/
-/*
- * This code configures the PCI read/write arbiter
- * which implements a weighted round robin
- * between the virtual queues in the chip.
- *
- * The values were derived for each PCI max payload and max request size.
- * since max payload and max request size are only known at run time,
- * this is done as a separate init stage.
- */
-
-#define NUM_WR_Q 13
-#define NUM_RD_Q 29
-#define MAX_RD_ORD 3
-#define MAX_WR_ORD 2
-
-/* configuration for one arbiter queue */
-struct arb_line {
- int l;
- int add;
- int ubound;
-};
-
-/* derived configuration for each read queue for each max request size */
-static const struct arb_line read_arb_data[NUM_RD_Q][MAX_RD_ORD + 1] = {
-/* 1 */ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
- { {4, 8, 4}, {4, 8, 4}, {4, 8, 4}, {4, 8, 4} },
- { {4, 3, 3}, {4, 3, 3}, {4, 3, 3}, {4, 3, 3} },
- { {8, 3, 6}, {16, 3, 11}, {16, 3, 11}, {16, 3, 11} },
- { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
-/* 10 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
-/* 20 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
- { {8, 64, 25}, {16, 64, 41}, {32, 64, 81}, {64, 64, 120} }
-};
-
-/* derived configuration for each write queue for each max request size */
-static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = {
-/* 1 */ { {4, 6, 3}, {4, 6, 3}, {4, 6, 3} },
- { {4, 2, 3}, {4, 2, 3}, {4, 2, 3} },
- { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
- { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
- { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
- { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
- { {8, 64, 25}, {16, 64, 25}, {32, 64, 25} },
- { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
- { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
-/* 10 */{ {8, 9, 6}, {16, 9, 11}, {32, 9, 21} },
- { {8, 47, 19}, {16, 47, 19}, {32, 47, 21} },
- { {8, 9, 6}, {16, 9, 11}, {16, 9, 11} },
- { {8, 64, 25}, {16, 64, 41}, {32, 64, 81} }
-};
-
-/* register addresses for read queues */
-static const struct arb_line read_arb_addr[NUM_RD_Q-1] = {
-/* 1 */ {PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0,
- PXP2_REG_RQ_BW_RD_UBOUND0},
- {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
- PXP2_REG_PSWRQ_BW_UB1},
- {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
- PXP2_REG_PSWRQ_BW_UB2},
- {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
- PXP2_REG_PSWRQ_BW_UB3},
- {PXP2_REG_RQ_BW_RD_L4, PXP2_REG_RQ_BW_RD_ADD4,
- PXP2_REG_RQ_BW_RD_UBOUND4},
- {PXP2_REG_RQ_BW_RD_L5, PXP2_REG_RQ_BW_RD_ADD5,
- PXP2_REG_RQ_BW_RD_UBOUND5},
- {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
- PXP2_REG_PSWRQ_BW_UB6},
- {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
- PXP2_REG_PSWRQ_BW_UB7},
- {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
- PXP2_REG_PSWRQ_BW_UB8},
-/* 10 */{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
- PXP2_REG_PSWRQ_BW_UB9},
- {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
- PXP2_REG_PSWRQ_BW_UB10},
- {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
- PXP2_REG_PSWRQ_BW_UB11},
- {PXP2_REG_RQ_BW_RD_L12, PXP2_REG_RQ_BW_RD_ADD12,
- PXP2_REG_RQ_BW_RD_UBOUND12},
- {PXP2_REG_RQ_BW_RD_L13, PXP2_REG_RQ_BW_RD_ADD13,
- PXP2_REG_RQ_BW_RD_UBOUND13},
- {PXP2_REG_RQ_BW_RD_L14, PXP2_REG_RQ_BW_RD_ADD14,
- PXP2_REG_RQ_BW_RD_UBOUND14},
- {PXP2_REG_RQ_BW_RD_L15, PXP2_REG_RQ_BW_RD_ADD15,
- PXP2_REG_RQ_BW_RD_UBOUND15},
- {PXP2_REG_RQ_BW_RD_L16, PXP2_REG_RQ_BW_RD_ADD16,
- PXP2_REG_RQ_BW_RD_UBOUND16},
- {PXP2_REG_RQ_BW_RD_L17, PXP2_REG_RQ_BW_RD_ADD17,
- PXP2_REG_RQ_BW_RD_UBOUND17},
- {PXP2_REG_RQ_BW_RD_L18, PXP2_REG_RQ_BW_RD_ADD18,
- PXP2_REG_RQ_BW_RD_UBOUND18},
-/* 20 */{PXP2_REG_RQ_BW_RD_L19, PXP2_REG_RQ_BW_RD_ADD19,
- PXP2_REG_RQ_BW_RD_UBOUND19},
- {PXP2_REG_RQ_BW_RD_L20, PXP2_REG_RQ_BW_RD_ADD20,
- PXP2_REG_RQ_BW_RD_UBOUND20},
- {PXP2_REG_RQ_BW_RD_L22, PXP2_REG_RQ_BW_RD_ADD22,
- PXP2_REG_RQ_BW_RD_UBOUND22},
- {PXP2_REG_RQ_BW_RD_L23, PXP2_REG_RQ_BW_RD_ADD23,
- PXP2_REG_RQ_BW_RD_UBOUND23},
- {PXP2_REG_RQ_BW_RD_L24, PXP2_REG_RQ_BW_RD_ADD24,
- PXP2_REG_RQ_BW_RD_UBOUND24},
- {PXP2_REG_RQ_BW_RD_L25, PXP2_REG_RQ_BW_RD_ADD25,
- PXP2_REG_RQ_BW_RD_UBOUND25},
- {PXP2_REG_RQ_BW_RD_L26, PXP2_REG_RQ_BW_RD_ADD26,
- PXP2_REG_RQ_BW_RD_UBOUND26},
- {PXP2_REG_RQ_BW_RD_L27, PXP2_REG_RQ_BW_RD_ADD27,
- PXP2_REG_RQ_BW_RD_UBOUND27},
- {PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
- PXP2_REG_PSWRQ_BW_UB28}
-};
-
-/* register addresses for write queues */
-static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
-/* 1 */ {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
- PXP2_REG_PSWRQ_BW_UB1},
- {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
- PXP2_REG_PSWRQ_BW_UB2},
- {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
- PXP2_REG_PSWRQ_BW_UB3},
- {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
- PXP2_REG_PSWRQ_BW_UB6},
- {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
- PXP2_REG_PSWRQ_BW_UB7},
- {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
- PXP2_REG_PSWRQ_BW_UB8},
- {PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
- PXP2_REG_PSWRQ_BW_UB9},
- {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
- PXP2_REG_PSWRQ_BW_UB10},
- {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
- PXP2_REG_PSWRQ_BW_UB11},
-/* 10 */{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
- PXP2_REG_PSWRQ_BW_UB28},
- {PXP2_REG_RQ_BW_WR_L29, PXP2_REG_RQ_BW_WR_ADD29,
- PXP2_REG_RQ_BW_WR_UBOUND29},
- {PXP2_REG_RQ_BW_WR_L30, PXP2_REG_RQ_BW_WR_ADD30,
- PXP2_REG_RQ_BW_WR_UBOUND30}
-};
-
-
-/****************************************************************************
-* CDU
-****************************************************************************/
-
-#define CDU_REGION_NUMBER_XCM_AG 2
-#define CDU_REGION_NUMBER_UCM_AG 4
-
-/**
- * String-to-compress [31:8] = CID (all 24 bits)
- * String-to-compress [7:4] = Region
- * String-to-compress [3:0] = Type
- */
-#define CDU_VALID_DATA(_cid, _region, _type) \
- (((_cid) << 8) | (((_region) & 0xf) << 4) | (((_type) & 0xf)))
-#define CDU_CRC8(_cid, _region, _type) \
- calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff)
-#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type) \
- (0x80 | (CDU_CRC8(_cid, _region, _type) & 0x7f))
-#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type) \
- (0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
-#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
-
-
-/* registers addresses are not in order
- so these arrays help simplify the code */
-static const int cm_blocks[9] = {
- MISC_BLOCK, TCM_BLOCK, UCM_BLOCK, CCM_BLOCK, XCM_BLOCK,
- TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
-};
-
#endif /* BNX2X_INIT_H */
diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h
index 32552b9..38b970a 100644
--- a/drivers/net/bnx2x_init_ops.h
+++ b/drivers/net/bnx2x_init_ops.h
@@ -11,85 +11,68 @@
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Vladislav Zolotarov <vladz@broadcom.com>
*/
+
#ifndef BNX2X_INIT_OPS_H
#define BNX2X_INIT_OPS_H
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len);
+
static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data,
u32 len)
{
- int i;
+ u32 i;
- for (i = 0; i < len; i++) {
+ for (i = 0; i < len; i++)
REG_WR(bp, addr + i*4, data[i]);
- if (!(i % 10000)) {
- touch_softlockup_watchdog();
- cpu_relax();
- }
- }
}
static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data,
- u16 len)
+ u32 len)
{
- int i;
+ u32 i;
- for (i = 0; i < len; i++) {
+ for (i = 0; i < len; i++)
REG_WR_IND(bp, addr + i*4, data[i]);
- if (!(i % 10000)) {
- touch_softlockup_watchdog();
- cpu_relax();
- }
- }
}
static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
{
- int offset = 0;
-
- if (bp->dmae_ready) {
- while (len > DMAE_LEN32_WR_MAX) {
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, DMAE_LEN32_WR_MAX);
- offset += DMAE_LEN32_WR_MAX * 4;
- len -= DMAE_LEN32_WR_MAX;
- }
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, len);
- } else
- bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
+ if (bp->dmae_ready)
+ bnx2x_write_dmae_phys_len(bp, GUNZIP_PHYS(bp), addr, len);
+ else
+ bnx2x_init_str_wr(bp, addr, GUNZIP_BUF(bp), len);
}
static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
{
- u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4));
- u32 buf_len32 = buf_len / 4;
- int i;
+ u32 buf_len = (((len*4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len*4));
+ u32 buf_len32 = buf_len/4;
+ u32 i;
- memset(bp->gunzip_buf, fill, buf_len);
+ memset(GUNZIP_BUF(bp), (u8)fill, buf_len);
for (i = 0; i < len; i += buf_len32) {
u32 cur_len = min(buf_len32, len - i);
- bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+ bnx2x_write_big_buf(bp, addr + i*4, cur_len);
}
}
static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
u32 len64)
{
- u32 buf_len32 = FW_BUF_SIZE / 4;
- u32 len = len64 * 2;
+ u32 buf_len32 = FW_BUF_SIZE/4;
+ u32 len = len64*2;
u64 data64 = 0;
- int i;
+ u32 i;
/* 64 bit value is in a blob: first low DWORD, then high DWORD */
data64 = HILO_U64((*(data + 1)), (*data));
+
len64 = min((u32)(FW_BUF_SIZE/8), len64);
for (i = 0; i < len64; i++) {
- u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i;
+ u64 *pdata = ((u64 *)(GUNZIP_BUF(bp))) + i;
*pdata = data64;
}
@@ -97,7 +80,7 @@
for (i = 0; i < len; i += buf_len32) {
u32 cur_len = min(buf_len32, len - i);
- bnx2x_write_big_buf(bp, addr + i * 4, cur_len);
+ bnx2x_write_big_buf(bp, addr + i*4, cur_len);
}
}
@@ -118,97 +101,81 @@
static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data)
{
IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr)
- data = bp->tsem_int_table_data;
- else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
- data = bp->csem_int_table_data;
- else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
- data = bp->usem_int_table_data;
- else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
- data = bp->xsem_int_table_data;
- else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
- data = bp->tsem_pram_data;
- else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
- data = bp->csem_pram_data;
- else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
- data = bp->usem_pram_data;
- else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
- data = bp->xsem_pram_data;
+ data = INIT_TSEM_INT_TABLE_DATA(bp);
+ else
+ IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
+ data = INIT_CSEM_INT_TABLE_DATA(bp);
+ else
+ IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
+ data = INIT_USEM_INT_TABLE_DATA(bp);
+ else
+ IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
+ data = INIT_XSEM_INT_TABLE_DATA(bp);
+ else
+ IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
+ data = INIT_TSEM_PRAM_DATA(bp);
+ else
+ IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
+ data = INIT_CSEM_PRAM_DATA(bp);
+ else
+ IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
+ data = INIT_USEM_PRAM_DATA(bp);
+ else
+ IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
+ data = INIT_XSEM_PRAM_DATA(bp);
return data;
}
static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len)
{
- int offset = 0;
-
- if (bp->dmae_ready) {
- while (len > DMAE_LEN32_WR_MAX) {
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, DMAE_LEN32_WR_MAX);
- offset += DMAE_LEN32_WR_MAX * 4;
- len -= DMAE_LEN32_WR_MAX;
- }
- bnx2x_write_dmae(bp, bp->gunzip_mapping + offset,
- addr + offset, len);
- } else
- bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len);
+ if (bp->dmae_ready)
+ bnx2x_write_dmae_phys_len(bp, GUNZIP_PHYS(bp), addr, len);
+ else
+ bnx2x_init_ind_wr(bp, addr, GUNZIP_BUF(bp), len);
}
static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data,
u32 len)
{
- /* This is needed for NO_ZIP mode, currently supported
- in little endian mode only */
- data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data);
+ data = (const u32 *)bnx2x_sel_blob(bp, addr, (const u8 *)data);
- if ((len * 4) > FW_BUF_SIZE) {
- BNX2X_ERR("LARGE DMAE OPERATION ! "
- "addr 0x%x len 0x%x\n", addr, len*4);
- return;
- }
- memcpy(bp->gunzip_buf, data, len * 4);
-
- bnx2x_write_big_buf_wb(bp, addr, len);
+ if (bp->dmae_ready)
+ VIRT_WR_DMAE_LEN(bp, data, addr, len);
+ else
+ bnx2x_init_ind_wr(bp, addr, data, len);
}
-static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr,
- u32 len, u32 blob_off)
+static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr, u32 len, u32 blob_off)
{
- int rc, i;
- const u8 *data = NULL;
+ const u8 *data = NULL;
+ int rc;
+ u32 i;
- data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off;
-
- if (data == NULL) {
- panic("Blob not found for addr 0x%x\n", addr);
- return;
- }
+ data = bnx2x_sel_blob(bp, addr, data) + blob_off*4;
rc = bnx2x_gunzip(bp, data, len);
- if (rc) {
- BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc);
- BNX2X_ERR("blob_offset=0x%x\n", blob_off);
+ if (rc)
return;
- }
/* gunzip_outlen is in dwords */
- len = bp->gunzip_outlen;
+ len = GUNZIP_OUTLEN(bp);
for (i = 0; i < len; i++)
- ((u32 *)bp->gunzip_buf)[i] =
- cpu_to_le32(((u32 *)bp->gunzip_buf)[i]);
+ ((u32 *)GUNZIP_BUF(bp))[i] =
+ cpu_to_le32(((u32 *)GUNZIP_BUF(bp))[i]);
bnx2x_write_big_buf_wb(bp, addr, len);
}
static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage)
{
- int hw_wr, i;
u16 op_start =
- bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)];
+ INIT_OPS_OFFSETS(bp)[BLOCK_OPS_IDX(block, stage, STAGE_START)];
u16 op_end =
- bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)];
+ INIT_OPS_OFFSETS(bp)[BLOCK_OPS_IDX(block, stage, STAGE_END)];
union init_op *op;
- u32 op_type, addr, len;
+ int hw_wr;
+ u32 i, op_type, addr, len;
const u32 *data, *data_base;
/* If empty block */
@@ -222,11 +189,11 @@
else
hw_wr = OP_WR_ASIC;
- data_base = bp->init_data;
+ data_base = INIT_DATA(bp);
for (i = op_start; i < op_end; i++) {
- op = (union init_op *)&(bp->init_ops[i]);
+ op = (union init_op *)&(INIT_OPS(bp)[i]);
op_type = op->str_wr.op;
addr = op->str_wr.offset;
@@ -234,7 +201,7 @@
data = data_base + op->str_wr.data_off;
/* HW/EMUL specific */
- if (unlikely((op_type > OP_WB) && (op_type == hw_wr)))
+ if ((op_type > OP_WB) && (op_type == hw_wr))
op_type = OP_WR;
switch (op_type) {
@@ -265,34 +232,178 @@
break;
default:
/* happens whenever an op is of a diff HW */
-#if 0
- DP(NETIF_MSG_HW, "skipping init operation "
- "index %d[%d:%d]: type %d addr 0x%x "
- "len %d(0x%x)\n",
- i, op_start, op_end, op_type, addr, len, len);
-#endif
break;
}
}
}
-/* PXP */
-static void bnx2x_init_pxp(struct bnx2x *bp)
-{
- u16 devctl;
- int r_order, w_order;
- u32 val, i;
- pci_read_config_word(bp->pdev,
- bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
- DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
- w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
- if (bp->mrrs == -1)
- r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
- else {
- DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
- r_order = bp->mrrs;
- }
+/****************************************************************************
+* PXP Arbiter
+****************************************************************************/
+/*
+ * This code configures the PCI read/write arbiter
+ * which implements a weighted round robin
+ * between the virtual queues in the chip.
+ *
+ * The values were derived for each PCI max payload and max request size.
+ * since max payload and max request size are only known at run time,
+ * this is done as a separate init stage.
+ */
+
+#define NUM_WR_Q 13
+#define NUM_RD_Q 29
+#define MAX_RD_ORD 3
+#define MAX_WR_ORD 2
+
+/* configuration for one arbiter queue */
+struct arb_line {
+ int l;
+ int add;
+ int ubound;
+};
+
+/* derived configuration for each read queue for each max request size */
+static const struct arb_line read_arb_data[NUM_RD_Q][MAX_RD_ORD + 1] = {
+/* 1 */ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
+ { {4, 8, 4}, {4, 8, 4}, {4, 8, 4}, {4, 8, 4} },
+ { {4, 3, 3}, {4, 3, 3}, {4, 3, 3}, {4, 3, 3} },
+ { {8, 3, 6}, {16, 3, 11}, {16, 3, 11}, {16, 3, 11} },
+ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {64, 3, 41} },
+/* 10 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 64, 6}, {16, 64, 11}, {32, 64, 21}, {32, 64, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+/* 20 */{ {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 3, 6}, {16, 3, 11}, {32, 3, 21}, {32, 3, 21} },
+ { {8, 64, 25}, {16, 64, 41}, {32, 64, 81}, {64, 64, 120} }
+};
+
+/* derived configuration for each write queue for each max request size */
+static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = {
+/* 1 */ { {4, 6, 3}, {4, 6, 3}, {4, 6, 3} },
+ { {4, 2, 3}, {4, 2, 3}, {4, 2, 3} },
+ { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
+ { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
+ { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
+ { {8, 2, 6}, {16, 2, 11}, {32, 2, 21} },
+ { {8, 64, 25}, {16, 64, 25}, {32, 64, 25} },
+ { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
+ { {8, 2, 6}, {16, 2, 11}, {16, 2, 11} },
+/* 10 */{ {8, 9, 6}, {16, 9, 11}, {32, 9, 21} },
+ { {8, 47, 19}, {16, 47, 19}, {32, 47, 21} },
+ { {8, 9, 6}, {16, 9, 11}, {16, 9, 11} },
+ { {8, 64, 25}, {16, 64, 41}, {32, 64, 81} }
+};
+
+/* register addresses for read queues */
+static const struct arb_line read_arb_addr[NUM_RD_Q-1] = {
+/* 1 */ {PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0,
+ PXP2_REG_RQ_BW_RD_UBOUND0},
+ {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
+ PXP2_REG_PSWRQ_BW_UB1},
+ {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
+ PXP2_REG_PSWRQ_BW_UB2},
+ {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
+ PXP2_REG_PSWRQ_BW_UB3},
+ {PXP2_REG_RQ_BW_RD_L4, PXP2_REG_RQ_BW_RD_ADD4,
+ PXP2_REG_RQ_BW_RD_UBOUND4},
+ {PXP2_REG_RQ_BW_RD_L5, PXP2_REG_RQ_BW_RD_ADD5,
+ PXP2_REG_RQ_BW_RD_UBOUND5},
+ {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
+ PXP2_REG_PSWRQ_BW_UB6},
+ {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
+ PXP2_REG_PSWRQ_BW_UB7},
+ {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
+ PXP2_REG_PSWRQ_BW_UB8},
+/* 10 */{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
+ PXP2_REG_PSWRQ_BW_UB9},
+ {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
+ PXP2_REG_PSWRQ_BW_UB10},
+ {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
+ PXP2_REG_PSWRQ_BW_UB11},
+ {PXP2_REG_RQ_BW_RD_L12, PXP2_REG_RQ_BW_RD_ADD12,
+ PXP2_REG_RQ_BW_RD_UBOUND12},
+ {PXP2_REG_RQ_BW_RD_L13, PXP2_REG_RQ_BW_RD_ADD13,
+ PXP2_REG_RQ_BW_RD_UBOUND13},
+ {PXP2_REG_RQ_BW_RD_L14, PXP2_REG_RQ_BW_RD_ADD14,
+ PXP2_REG_RQ_BW_RD_UBOUND14},
+ {PXP2_REG_RQ_BW_RD_L15, PXP2_REG_RQ_BW_RD_ADD15,
+ PXP2_REG_RQ_BW_RD_UBOUND15},
+ {PXP2_REG_RQ_BW_RD_L16, PXP2_REG_RQ_BW_RD_ADD16,
+ PXP2_REG_RQ_BW_RD_UBOUND16},
+ {PXP2_REG_RQ_BW_RD_L17, PXP2_REG_RQ_BW_RD_ADD17,
+ PXP2_REG_RQ_BW_RD_UBOUND17},
+ {PXP2_REG_RQ_BW_RD_L18, PXP2_REG_RQ_BW_RD_ADD18,
+ PXP2_REG_RQ_BW_RD_UBOUND18},
+/* 20 */{PXP2_REG_RQ_BW_RD_L19, PXP2_REG_RQ_BW_RD_ADD19,
+ PXP2_REG_RQ_BW_RD_UBOUND19},
+ {PXP2_REG_RQ_BW_RD_L20, PXP2_REG_RQ_BW_RD_ADD20,
+ PXP2_REG_RQ_BW_RD_UBOUND20},
+ {PXP2_REG_RQ_BW_RD_L22, PXP2_REG_RQ_BW_RD_ADD22,
+ PXP2_REG_RQ_BW_RD_UBOUND22},
+ {PXP2_REG_RQ_BW_RD_L23, PXP2_REG_RQ_BW_RD_ADD23,
+ PXP2_REG_RQ_BW_RD_UBOUND23},
+ {PXP2_REG_RQ_BW_RD_L24, PXP2_REG_RQ_BW_RD_ADD24,
+ PXP2_REG_RQ_BW_RD_UBOUND24},
+ {PXP2_REG_RQ_BW_RD_L25, PXP2_REG_RQ_BW_RD_ADD25,
+ PXP2_REG_RQ_BW_RD_UBOUND25},
+ {PXP2_REG_RQ_BW_RD_L26, PXP2_REG_RQ_BW_RD_ADD26,
+ PXP2_REG_RQ_BW_RD_UBOUND26},
+ {PXP2_REG_RQ_BW_RD_L27, PXP2_REG_RQ_BW_RD_ADD27,
+ PXP2_REG_RQ_BW_RD_UBOUND27},
+ {PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
+ PXP2_REG_PSWRQ_BW_UB28}
+};
+
+/* register addresses for write queues */
+static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
+/* 1 */ {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
+ PXP2_REG_PSWRQ_BW_UB1},
+ {PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
+ PXP2_REG_PSWRQ_BW_UB2},
+ {PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
+ PXP2_REG_PSWRQ_BW_UB3},
+ {PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
+ PXP2_REG_PSWRQ_BW_UB6},
+ {PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
+ PXP2_REG_PSWRQ_BW_UB7},
+ {PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
+ PXP2_REG_PSWRQ_BW_UB8},
+ {PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
+ PXP2_REG_PSWRQ_BW_UB9},
+ {PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
+ PXP2_REG_PSWRQ_BW_UB10},
+ {PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
+ PXP2_REG_PSWRQ_BW_UB11},
+/* 10 */{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
+ PXP2_REG_PSWRQ_BW_UB28},
+ {PXP2_REG_RQ_BW_WR_L29, PXP2_REG_RQ_BW_WR_ADD29,
+ PXP2_REG_RQ_BW_WR_UBOUND29},
+ {PXP2_REG_RQ_BW_WR_L30, PXP2_REG_RQ_BW_WR_ADD30,
+ PXP2_REG_RQ_BW_WR_UBOUND30}
+};
+
+static void bnx2x_init_pxp_arb(struct bnx2x *bp, int r_order, int w_order)
+{
+ u32 val, i;
if (r_order > MAX_RD_ORD) {
DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n",
@@ -367,6 +478,11 @@
REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
if (CHIP_IS_E1H(bp)) {
+ /* MPS w_order optimal TH presently TH
+ * 128 0 0 2
+ * 256 1 1 3
+ * >=512 2 2 3
+ */
val = ((w_order == 0) ? 2 : 3);
REG_WR(bp, PXP2_REG_WR_HC_MPS, val);
REG_WR(bp, PXP2_REG_WR_USDM_MPS, val);
@@ -382,61 +498,4 @@
}
}
-/*****************************************************************************
- * Description:
- * Calculates crc 8 on a word value: polynomial 0-1-2-8
- * Code was translated from Verilog.
- ****************************************************************************/
-static u8 calc_crc8(u32 data, u8 crc)
-{
- u8 D[32];
- u8 NewCRC[8];
- u8 C[8];
- u8 crc_res;
- u8 i;
-
- /* split the data into 31 bits */
- for (i = 0; i < 32; i++) {
- D[i] = data & 1;
- data = data >> 1;
- }
-
- /* split the crc into 8 bits */
- for (i = 0; i < 8; i++) {
- C[i] = crc & 1;
- crc = crc >> 1;
- }
-
- NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
- D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
- C[6] ^ C[7];
- NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
- D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
- D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6];
- NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
- D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
- C[0] ^ C[1] ^ C[4] ^ C[5];
- NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
- D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
- C[1] ^ C[2] ^ C[5] ^ C[6];
- NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
- D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
- C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
- NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
- D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
- C[3] ^ C[4] ^ C[7];
- NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
- D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
- C[5];
- NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
- D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
- C[6];
-
- crc_res = 0;
- for (i = 0; i < 8; i++)
- crc_res |= (NewCRC[i] << i);
-
- return crc_res;
-}
-
#endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 2ee581a..e32d337 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -37,6 +37,10 @@
/* Shortcut definitions */
/***********************************************************/
+#define NIG_LATCH_BC_ENABLE_MI_INT 0
+
+#define NIG_STATUS_EMAC0_MI_INT \
+ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT
#define NIG_STATUS_XGXS0_LINK10G \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
#define NIG_STATUS_XGXS0_LINK_STATUS \
@@ -139,21 +143,26 @@
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
#define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
+
+#define SFP_EEPROM_COMP_CODE_ADDR 0x3
+ #define SFP_EEPROM_COMP_CODE_SR_MASK (1<<4)
+ #define SFP_EEPROM_COMP_CODE_LR_MASK (1<<5)
+ #define SFP_EEPROM_COMP_CODE_LRM_MASK (1<<6)
+
#define SFP_EEPROM_FC_TX_TECH_ADDR 0x8
#define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
#define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8
-#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
-#define SFP_EEPROM_VENDOR_NAME_SIZE 16
+
#define SFP_EEPROM_OPTIONS_ADDR 0x40
#define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
#define SFP_EEPROM_OPTIONS_SIZE 2
-#define SFP_MODULE_TYPE_UNKNOWN 0x0
-#define SFP_MODULE_TYPE_LC 0x1
-#define SFP_MODULE_TYPE_ACTIVE_COPPER_CABLE 0x2
-#define SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE 0x3
+#define EDC_MODE_LINEAR 0x0022
+#define EDC_MODE_LIMITING 0x0044
+#define EDC_MODE_PASSIVE_DAC 0x0055
-#define SFP_LIMITING_MODE_VALUE 0x0044
+
+
/**********************************************************/
/* INTERFACE */
/**********************************************************/
@@ -173,6 +182,7 @@
{
struct bnx2x *bp = params->bp;
u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
/* Set Clause 22 */
REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1);
REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000);
@@ -185,6 +195,7 @@
static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags)
{
struct bnx2x *bp = params->bp;
+
if (phy_flags & PHY_XGXS_FLAG) {
REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST +
params->port*0x18, 0);
@@ -388,7 +399,8 @@
/* enable access for bmac registers */
REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
- }
+ } else
+ REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0);
vars->mac_type = MAC_TYPE_EMAC;
return 0;
@@ -455,7 +467,6 @@
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
wb_data, 2);
-
/* set rx mtu */
wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
wb_data[1] = 0;
@@ -674,6 +685,7 @@
static void bnx2x_update_mng(struct link_params *params, u32 link_status)
{
struct bnx2x *bp = params->bp;
+
REG_WR(bp, params->shmem_base +
offsetof(struct shmem_region,
port_mb[params->port].link_status),
@@ -770,7 +782,6 @@
DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
line_speed);
return -EINVAL;
- break;
}
}
REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
@@ -790,9 +801,11 @@
static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port)
{
u32 emac_base;
+
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
/* All MDC/MDIO is directed through single EMAC */
if (REG_RD(bp, NIG_REG_PORT_SWAP))
emac_base = GRCBASE_EMAC0;
@@ -894,7 +907,7 @@
val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL |
EMAC_MDIO_MODE_CLOCK_CNT));
val |= (EMAC_MDIO_MODE_CLAUSE_45 |
- (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
udelay(40);
@@ -1011,8 +1024,8 @@
MDIO_COMBO_IEEE0_MII_CONTROL,
(mii_control |
MDIO_COMBO_IEEO_MII_CONTROL_RESET));
-
- bnx2x_set_serdes_access(params);
+ if (params->switch_cfg == SWITCH_CFG_1G)
+ bnx2x_set_serdes_access(params);
/* wait for the reset to self clear */
for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
@@ -1141,7 +1154,8 @@
}
static void bnx2x_set_autoneg(struct link_params *params,
- struct link_vars *vars)
+ struct link_vars *vars,
+ u8 enable_cl73)
{
struct bnx2x *bp = params->bp;
u16 reg_val;
@@ -1171,7 +1185,9 @@
params->phy_addr,
MDIO_REG_BANK_SERDES_DIGITAL,
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val);
- reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
+ reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN |
+ MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT);
+ reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE;
if (vars->line_speed == SPEED_AUTO_NEG)
reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
else
@@ -1203,8 +1219,51 @@
MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
reg_val);
- /* CL73 Autoneg Disabled */
- reg_val = 0;
+ if (enable_cl73) {
+ /* Enable Cl73 FSM status bits */
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_USERB0,
+ MDIO_CL73_USERB0_CL73_UCTRL,
+ MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL);
+
+ /* Enable BAM Station Manager*/
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_USERB0,
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1,
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
+ MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);
+
+ /* Merge CL73 and CL37 aneg resolution */
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_USERB0,
+ MDIO_CL73_USERB0_CL73_BAM_CTRL3,
+ ®_val);
+
+ if (params->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+ /* Set the CL73 AN speed */
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_IEEEB1,
+ MDIO_CL73_IEEEB1_AN_ADV2,
+ ®_val);
+
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_IEEEB1,
+ MDIO_CL73_IEEEB1_AN_ADV2,
+ reg_val | MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4);
+
+ }
+ /* CL73 Autoneg Enabled */
+ reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
+
+ } else /* CL73 Autoneg Disabled */
+ reg_val = 0;
CL45_WR_OVER_CL22(bp, params->port,
params->phy_addr,
@@ -1219,14 +1278,14 @@
struct bnx2x *bp = params->bp;
u16 reg_val;
- /* program duplex, disable autoneg */
-
+ /* program duplex, disable autoneg and sgmii*/
CL45_RD_OVER_CL22(bp, params->port,
params->phy_addr,
MDIO_REG_BANK_COMBO_IEEE0,
MDIO_COMBO_IEEE0_MII_CONTROL, ®_val);
reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
- MDIO_COMBO_IEEO_MII_CONTROL_AN_EN);
+ MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+ MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK);
if (params->req_duplex == DUPLEX_FULL)
reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
CL45_WR_OVER_CL22(bp, params->port,
@@ -1287,10 +1346,10 @@
CL45_WR_OVER_CL22(bp, params->port,
params->phy_addr,
MDIO_REG_BANK_OVER_1G,
- MDIO_OVER_1G_UP3, 0);
+ MDIO_OVER_1G_UP3, 0x400);
}
-static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc)
{
*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
/* resolve pause mode and advertisement
@@ -1324,7 +1383,7 @@
}
static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
- u32 ieee_fc)
+ u16 ieee_fc)
{
struct bnx2x *bp = params->bp;
/* for AN, we are always publishing full duplex */
@@ -1332,31 +1391,49 @@
CL45_WR_OVER_CL22(bp, params->port,
params->phy_addr,
MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc);
}
-static void bnx2x_restart_autoneg(struct link_params *params)
+static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73)
{
struct bnx2x *bp = params->bp;
u16 mii_control;
+
DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");
/* Enable and restart BAM/CL37 aneg */
- CL45_RD_OVER_CL22(bp, params->port,
- params->phy_addr,
- MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_MII_CONTROL,
- &mii_control);
- DP(NETIF_MSG_LINK,
- "bnx2x_restart_autoneg mii_control before = 0x%x\n",
- mii_control);
- CL45_WR_OVER_CL22(bp, params->port,
- params->phy_addr,
- MDIO_REG_BANK_COMBO_IEEE0,
- MDIO_COMBO_IEEE0_MII_CONTROL,
- (mii_control |
- MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
- MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
+ if (enable_cl73) {
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_IEEEB0,
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+ &mii_control);
+
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_IEEEB0,
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+ (mii_control |
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
+ } else {
+
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_COMBO_IEEE0,
+ MDIO_COMBO_IEEE0_MII_CONTROL,
+ &mii_control);
+ DP(NETIF_MSG_LINK,
+ "bnx2x_restart_autoneg mii_control before = 0x%x\n",
+ mii_control);
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_COMBO_IEEE0,
+ MDIO_COMBO_IEEE0_MII_CONTROL,
+ (mii_control |
+ MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+ MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
+ }
}
static void bnx2x_initialize_sgmii_process(struct link_params *params,
@@ -1428,7 +1505,7 @@
} else { /* AN mode */
/* enable and restart AN */
- bnx2x_restart_autoneg(params);
+ bnx2x_restart_autoneg(params, 0);
}
}
@@ -1460,22 +1537,19 @@
}
}
-static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
+static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u8 ext_phy_addr;
- u16 ld_pause; /* local */
- u16 lp_pause; /* link partner */
- u16 an_complete; /* AN complete */
+ u16 ld_pause; /* local */
+ u16 lp_pause; /* link partner */
+ u16 an_complete; /* AN complete */
u16 pause_result;
u8 ret = 0;
u32 ext_phy_type;
u8 port = params->port;
- ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
+ ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* read twice */
@@ -1570,7 +1644,7 @@
DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
bnx2x_pause_resolve(vars, pause_result);
} else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
- (bnx2x_ext_phy_resove_fc(params, vars))) {
+ (bnx2x_ext_phy_resolve_fc(params, vars))) {
return;
} else {
if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
@@ -1581,10 +1655,77 @@
DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
}
-
+static void bnx2x_check_fallback_to_cl37(struct link_params *params)
+{
+ struct bnx2x *bp = params->bp;
+ u16 rx_status, ustat_val, cl37_fsm_recieved;
+ DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n");
+ /* Step 1: Make sure signal is detected */
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_RX0,
+ MDIO_RX0_RX_STATUS,
+ &rx_status);
+ if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) !=
+ (MDIO_RX0_RX_STATUS_SIGDET)) {
+ DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73."
+ "rx_status(0x80b0) = 0x%x\n", rx_status);
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_IEEEB0,
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN);
+ return;
+ }
+ /* Step 2: Check CL73 state machine */
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_USERB0,
+ MDIO_CL73_USERB0_CL73_USTAT1,
+ &ustat_val);
+ if ((ustat_val &
+ (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
+ MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) !=
+ (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
+ MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) {
+ DP(NETIF_MSG_LINK, "CL73 state-machine is not stable. "
+ "ustat_val(0x8371) = 0x%x\n", ustat_val);
+ return;
+ }
+ /* Step 3: Check CL37 Message Pages received to indicate LP
+ supports only CL37 */
+ CL45_RD_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_REMOTE_PHY,
+ MDIO_REMOTE_PHY_MISC_RX_STATUS,
+ &cl37_fsm_recieved);
+ if ((cl37_fsm_recieved &
+ (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
+ MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
+ (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
+ MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
+ DP(NETIF_MSG_LINK, "No CL37 FSM were received. "
+ "misc_rx_status(0x8330) = 0x%x\n",
+ cl37_fsm_recieved);
+ return;
+ }
+ /* The combined cl37/cl73 fsm state information indicating that we are
+ connected to a device which does not support cl73, but does support
+ cl37 BAM. In this case we disable cl73 and restart cl37 auto-neg */
+ /* Disable CL73 */
+ CL45_WR_OVER_CL22(bp, params->port,
+ params->phy_addr,
+ MDIO_REG_BANK_CL73_IEEEB0,
+ MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+ 0);
+ /* Restart CL37 autoneg */
+ bnx2x_restart_autoneg(params, 0);
+ DP(NETIF_MSG_LINK, "Disabling CL73, and restarting CL37 autoneg\n");
+}
static u8 bnx2x_link_settings_status(struct link_params *params,
- struct link_vars *vars,
- u32 gp_status)
+ struct link_vars *vars,
+ u32 gp_status,
+ u8 ext_phy_link_up)
{
struct bnx2x *bp = params->bp;
u16 new_line_speed;
@@ -1645,7 +1786,7 @@
"link speed unsupported gp_status 0x%x\n",
gp_status);
return -EINVAL;
- break;
+
case GP_STATUS_10G_KX4:
case GP_STATUS_10G_HIG:
case GP_STATUS_10G_CX4:
@@ -1682,14 +1823,23 @@
DP(NETIF_MSG_LINK,
"link speed unsupported gp_status 0x%x\n",
gp_status);
- return -EINVAL;
- break;
+ return -EINVAL;
}
/* Upon link speed change set the NIG into drain mode.
Comes to deals with possible FIFO glitch due to clk change
when speed is decreased without link down indicator */
if (new_line_speed != vars->line_speed) {
+ if (XGXS_EXT_PHY_TYPE(params->ext_phy_config) !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT &&
+ ext_phy_link_up) {
+ DP(NETIF_MSG_LINK, "Internal link speed %d is"
+ " different than the external"
+ " link speed %d\n", new_line_speed,
+ vars->line_speed);
+ vars->phy_link_up = 0;
+ return 0;
+ }
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+ params->port*4, 0);
msleep(1);
@@ -1703,9 +1853,7 @@
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
- (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481))) {
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) {
vars->autoneg = AUTO_NEG_ENABLED;
if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
@@ -1736,6 +1884,13 @@
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->autoneg = AUTO_NEG_DISABLED;
vars->mac_type = MAC_TYPE_NONE;
+
+ if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+ ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT))) {
+ /* Check signal is detected */
+ bnx2x_check_fallback_to_cl37(params);
+ }
}
DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x \n",
@@ -1840,7 +1995,7 @@
/*****************************************************************************/
/* External Phy section */
/*****************************************************************************/
-static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
+void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port)
{
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
@@ -1854,9 +2009,8 @@
{
struct bnx2x *bp = params->bp;
u32 ext_phy_type;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
DP(NETIF_MSG_LINK, "Port %x: bnx2x_ext_phy_reset\n", params->port);
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* The PHY reset is controled by GPIO 1
@@ -1879,7 +2033,7 @@
params->port);
/* HW reset */
- bnx2x_hw_reset(bp, params->port);
+ bnx2x_ext_phy_hw_reset(bp, params->port);
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
@@ -1887,6 +2041,10 @@
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL, 0xa040);
break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
/* Restore normal power mode*/
@@ -1904,16 +2062,17 @@
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL,
1<<15);
-
break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ DP(NETIF_MSG_LINK, "XGXS 8072\n");
+
/* Unset Low Power Mode and SW reset */
/* Restore normal power mode*/
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
params->port);
- DP(NETIF_MSG_LINK, "XGXS 8072\n");
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
@@ -1921,8 +2080,9 @@
MDIO_PMA_REG_CTRL,
1<<15);
break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
- {
+ DP(NETIF_MSG_LINK, "XGXS 8073\n");
/* Restore normal power mode*/
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
@@ -1932,9 +2092,6 @@
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
params->port);
-
- DP(NETIF_MSG_LINK, "XGXS 8073\n");
- }
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -1946,19 +2103,17 @@
params->port);
/* HW reset */
- bnx2x_hw_reset(bp, params->port);
-
+ bnx2x_ext_phy_hw_reset(bp, params->port);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
-
/* Restore normal power mode*/
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
params->port);
/* HW reset */
- bnx2x_hw_reset(bp, params->port);
+ bnx2x_ext_phy_hw_reset(bp, params->port);
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
@@ -1986,24 +2141,22 @@
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- bnx2x_hw_reset(bp, params->port);
+ bnx2x_ext_phy_hw_reset(bp, params->port);
break;
default:
- DP(NETIF_MSG_LINK,
- "BAD SerDes ext_phy_config 0x%x\n",
+ DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
params->ext_phy_config);
break;
}
}
}
-
static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port,
u32 shmem_base, u32 spirom_ver)
{
- DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x\n",
- (u16)(spirom_ver>>16), (u16)spirom_ver);
+ DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n",
+ (u16)(spirom_ver>>16), (u16)spirom_ver, port);
REG_WR(bp, shmem_base +
offsetof(struct shmem_region,
port_mb[port].ext_phy_fw_version),
@@ -2015,6 +2168,7 @@
u32 shmem_base)
{
u16 fw_ver1, fw_ver2;
+
bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD,
@@ -2023,13 +2177,116 @@
(u32)(fw_ver1<<16 | fw_ver2));
}
+
+static void bnx2x_save_8481_spirom_version(struct bnx2x *bp, u8 port,
+ u8 ext_phy_addr, u32 shmem_base)
+{
+ u16 val, fw_ver1, fw_ver2, cnt;
+ /* For the 32 bits registers in 8481, access via MDIO2ARM interface.*/
+ /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ 0xA819, 0x0014);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA81A,
+ 0xc200);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA81B,
+ 0x0000);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA81C,
+ 0x0300);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA817,
+ 0x0009);
+
+ for (cnt = 0; cnt < 100; cnt++) {
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA818,
+ &val);
+ if (val & 1)
+ break;
+ udelay(5);
+ }
+ if (cnt == 100) {
+ DP(NETIF_MSG_LINK, "Unable to read 8481 phy fw version(1)\n");
+ bnx2x_save_spirom_version(bp, port,
+ shmem_base, 0);
+ return;
+ }
+
+
+ /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ 0xA819, 0x0000);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ 0xA81A, 0xc200);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ 0xA817, 0x000A);
+ for (cnt = 0; cnt < 100; cnt++) {
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA818,
+ &val);
+ if (val & 1)
+ break;
+ udelay(5);
+ }
+ if (cnt == 100) {
+ DP(NETIF_MSG_LINK, "Unable to read 8481 phy fw version(2)\n");
+ bnx2x_save_spirom_version(bp, port,
+ shmem_base, 0);
+ return;
+ }
+
+ /* lower 16 bits of the register SPI_FW_STATUS */
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA81B,
+ &fw_ver1);
+ /* upper 16 bits of register SPI_FW_STATUS */
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xA81C,
+ &fw_ver2);
+
+ bnx2x_save_spirom_version(bp, port,
+ shmem_base, (fw_ver2<<16) | fw_ver1);
+}
+
static void bnx2x_bcm8072_external_rom_boot(struct link_params *params)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* Need to wait 200ms after reset */
@@ -2077,9 +2334,7 @@
/* This is only required for 8073A1, version 102 only */
struct bnx2x *bp = params->bp;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u16 val;
/* Read 8073 HW revision*/
@@ -2110,9 +2365,7 @@
static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u16 val, cnt, cnt1 ;
bnx2x_cl45_read(bp, params->port,
@@ -2168,16 +2421,17 @@
}
DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n");
return -EINVAL;
-
}
-static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
- u8 ext_phy_addr, u32 shmem_base)
+static void bnx2x_bcm8073_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port,
+ u8 ext_phy_addr,
+ u32 ext_phy_type,
+ u32 shmem_base)
{
/* Boot port from external ROM */
/* EDC grst */
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
@@ -2185,21 +2439,21 @@
/* ucode reboot and rst */
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
0x008c);
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_MISC_CTRL1, 0x0001);
/* Reset internal microprocessor */
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
@@ -2207,7 +2461,7 @@
/* Release srst bit */
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
@@ -2218,24 +2472,41 @@
/* Clear ser_boot_ctl bit */
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_MISC_CTRL1, 0x0000);
bnx2x_save_bcm_spirom_ver(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_type,
ext_phy_addr,
shmem_base);
}
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+ u8 ext_phy_addr,
+ u32 shmem_base)
+{
+ bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ shmem_base);
+}
+
+static void bnx2x_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port,
+ u8 ext_phy_addr,
+ u32 shmem_base)
+{
+ bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ shmem_base);
+
+}
+
static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* Need to wait 100ms after reset */
@@ -2258,9 +2529,10 @@
MDIO_PMA_REG_GEN_CTRL,
MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
+ /* Set PLL register value to be same like in P13 ver */
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_GEN_CTRL2,
+ MDIO_PMA_REG_PLL_CTRL,
0x73A0);
/* Clear soft reset.
@@ -2285,15 +2557,17 @@
params->shmem_base);
}
-static void bnx2x_bcm8726_set_transmitter(struct bnx2x *bp, u8 port,
- u8 ext_phy_addr, u8 tx_en)
+static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, u8 port,
+ u32 ext_phy_type, u8 ext_phy_addr,
+ u8 tx_en)
{
u16 val;
+
DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n",
tx_en, port);
/* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/
bnx2x_cl45_read(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_PHY_IDENTIFIER,
@@ -2305,23 +2579,23 @@
val |= (1<<15);
bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+ ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_PHY_IDENTIFIER,
val);
}
-
-static u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
- u8 byte_cnt, u8 *o_buf) {
+static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params,
+ u16 addr, u8 byte_cnt, u8 *o_buf)
+{
struct bnx2x *bp = params->bp;
- u16 val, i;
+ u16 val = 0;
+ u16 i;
u8 port = params->port;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
if (byte_cnt > 16) {
DP(NETIF_MSG_LINK, "Reading from eeprom is"
" is limited to 0xf\n");
@@ -2332,7 +2606,7 @@
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT,
+ MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT,
(byte_cnt | 0xa000));
/* Set the read command address */
@@ -2340,7 +2614,7 @@
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR,
+ MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR,
addr);
/* Activate read command */
@@ -2348,7 +2622,7 @@
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8726_TWO_WIRE_CTRL,
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
0x2c0f);
/* Wait up to 500us for command complete status */
@@ -2357,18 +2631,18 @@
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8726_TWO_WIRE_CTRL, &val);
- if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) ==
- MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE)
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+ if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE)
break;
udelay(5);
}
- if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) !=
- MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE) {
+ if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
DP(NETIF_MSG_LINK,
"Got bad status 0x%x when reading from SFP+ EEPROM\n",
- (val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK));
+ (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
return -EINVAL;
}
@@ -2387,29 +2661,145 @@
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_8726_TWO_WIRE_CTRL, &val);
- if ((val & MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK) ==
- MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE)
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+ if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
return 0;;
msleep(1);
}
return -EINVAL;
}
-
-static u8 bnx2x_get_sfp_module_type(struct link_params *params,
- u8 *module_type)
+static u8 bnx2x_8727_read_sfp_module_eeprom(struct link_params *params,
+ u16 addr, u8 byte_cnt, u8 *o_buf)
{
struct bnx2x *bp = params->bp;
- u8 val;
- *module_type = SFP_MODULE_TYPE_UNKNOWN;
+ u16 val, i;
+ u8 port = params->port;
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+ if (byte_cnt > 16) {
+ DP(NETIF_MSG_LINK, "Reading from eeprom is"
+ " is limited to 0xf\n");
+ return -EINVAL;
+ }
+
+ /* Need to read from 1.8000 to clear it */
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+ &val);
+
+ /* Set the read command byte count */
+ bnx2x_cl45_write(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT,
+ ((byte_cnt < 2) ? 2 : byte_cnt));
+
+ /* Set the read command address */
+ bnx2x_cl45_write(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR,
+ addr);
+ /* Set the destination address */
+ bnx2x_cl45_write(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0x8004,
+ MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF);
+
+ /* Activate read command */
+ bnx2x_cl45_write(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+ 0x8002);
+ /* Wait appropriate time for two-wire command to finish before
+ polling the status register */
+ msleep(1);
+
+ /* Wait up to 500us for command complete status */
+ for (i = 0; i < 100; i++) {
+ bnx2x_cl45_read(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+ if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE)
+ break;
+ udelay(5);
+ }
+
+ if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
+ DP(NETIF_MSG_LINK,
+ "Got bad status 0x%x when reading from SFP+ EEPROM\n",
+ (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
+ return -EINVAL;
+ }
+
+ /* Read the buffer */
+ for (i = 0; i < byte_cnt; i++) {
+ bnx2x_cl45_read(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val);
+ o_buf[i] = (u8)(val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK);
+ }
+
+ for (i = 0; i < 100; i++) {
+ bnx2x_cl45_read(bp, port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+ if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+ MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
+ return 0;;
+ msleep(1);
+ }
+
+ return -EINVAL;
+}
+
+u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
+ u8 byte_cnt, u8 *o_buf)
+{
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+ if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726)
+ return bnx2x_8726_read_sfp_module_eeprom(params, addr,
+ byte_cnt, o_buf);
+ else if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727)
+ return bnx2x_8727_read_sfp_module_eeprom(params, addr,
+ byte_cnt, o_buf);
+ return -EINVAL;
+}
+
+static u8 bnx2x_get_edc_mode(struct link_params *params,
+ u16 *edc_mode)
+{
+ struct bnx2x *bp = params->bp;
+ u8 val, check_limiting_mode = 0;
+ *edc_mode = EDC_MODE_LIMITING;
/* First check for copper cable */
if (bnx2x_read_sfp_module_eeprom(params,
SFP_EEPROM_CON_TYPE_ADDR,
1,
&val) != 0) {
- DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM");
+ DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n");
return -EINVAL;
}
@@ -2417,6 +2807,7 @@
case SFP_EEPROM_CON_TYPE_VAL_COPPER:
{
u8 copper_module_type;
+
/* Check if its active cable( includes SFP+ module)
of passive cable*/
if (bnx2x_read_sfp_module_eeprom(params,
@@ -2433,13 +2824,13 @@
if (copper_module_type &
SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
DP(NETIF_MSG_LINK, "Active Copper cable detected\n");
- *module_type = SFP_MODULE_TYPE_ACTIVE_COPPER_CABLE;
+ check_limiting_mode = 1;
} else if (copper_module_type &
SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
DP(NETIF_MSG_LINK, "Passive Copper"
" cable detected\n");
- *module_type =
- SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE;
+ *edc_mode =
+ EDC_MODE_PASSIVE_DAC;
} else {
DP(NETIF_MSG_LINK, "Unknown copper-cable-"
"type 0x%x !!!\n", copper_module_type);
@@ -2449,97 +2840,97 @@
}
case SFP_EEPROM_CON_TYPE_VAL_LC:
DP(NETIF_MSG_LINK, "Optic module detected\n");
- *module_type = SFP_MODULE_TYPE_LC;
+ check_limiting_mode = 1;
break;
-
default:
DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n",
val);
return -EINVAL;
}
+
+ if (check_limiting_mode) {
+ u8 options[SFP_EEPROM_OPTIONS_SIZE];
+ if (bnx2x_read_sfp_module_eeprom(params,
+ SFP_EEPROM_OPTIONS_ADDR,
+ SFP_EEPROM_OPTIONS_SIZE,
+ options) != 0) {
+ DP(NETIF_MSG_LINK, "Failed to read Option"
+ " field from module EEPROM\n");
+ return -EINVAL;
+ }
+ if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
+ *edc_mode = EDC_MODE_LINEAR;
+ else
+ *edc_mode = EDC_MODE_LIMITING;
+ }
+ DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode);
return 0;
}
-
/* This function read the relevant field from the module ( SFP+ ),
and verify it is compliant with this board */
-static u8 bnx2x_verify_sfp_module(struct link_params *params,
- u8 module_type)
+static u8 bnx2x_verify_sfp_module(struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u8 *str_p, *tmp_buf;
- u16 i;
+ u32 val;
+ u32 fw_resp;
+ char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1];
+ char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1];
-#define COMPLIANCE_STR_CNT 6
- u8 *compliance_str[] = {"Broadcom", "JDSU", "Molex Inc", "PICOLIGHT",
- "FINISAR CORP. ", "Amphenol"};
- u8 buf[SFP_EEPROM_VENDOR_NAME_SIZE];
- /* Passive Copper cables are allowed to participate,
- since the module is hardwired to the copper cable */
-
- if (!(params->feature_config_flags &
- FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED)) {
+ val = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].config));
+ if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) {
DP(NETIF_MSG_LINK, "NOT enforcing module verification\n");
return 0;
}
- if (module_type != SFP_MODULE_TYPE_LC) {
- DP(NETIF_MSG_LINK, "No need to verify copper cable\n");
+ /* Ask the FW to validate the module */
+ if (!(params->feature_config_flags &
+ FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY)) {
+ DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
+ "verification\n");
+ return -EINVAL;
+ }
+
+ fw_resp = bnx2x_fw_command(bp, DRV_MSG_CODE_VRFY_OPT_MDL);
+ if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) {
+ DP(NETIF_MSG_LINK, "Approved module\n");
return 0;
}
- /* In case of non copper cable or Active copper cable,
- verify that the SFP+ module is compliant with this board*/
+ /* format the warning message */
if (bnx2x_read_sfp_module_eeprom(params,
SFP_EEPROM_VENDOR_NAME_ADDR,
SFP_EEPROM_VENDOR_NAME_SIZE,
- buf) != 0) {
- DP(NETIF_MSG_LINK, "Failed to read Vendor-Name from"
- " module EEPROM\n");
- return -EINVAL;
- }
- for (i = 0; i < COMPLIANCE_STR_CNT; i++) {
- str_p = compliance_str[i];
- tmp_buf = buf;
- while (*str_p) {
- if ((u8)(*tmp_buf) != (u8)(*str_p))
- break;
- str_p++;
- tmp_buf++;
- }
+ (u8 *)vendor_name))
+ vendor_name[0] = '\0';
+ else
+ vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0';
+ if (bnx2x_read_sfp_module_eeprom(params,
+ SFP_EEPROM_PART_NO_ADDR,
+ SFP_EEPROM_PART_NO_SIZE,
+ (u8 *)vendor_pn))
+ vendor_pn[0] = '\0';
+ else
+ vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0';
- if (!(*str_p)) {
- DP(NETIF_MSG_LINK, "SFP+ Module verified, "
- "index=%x\n", i);
- return 0;
- }
- }
- DP(NETIF_MSG_LINK, "Incompliant SFP+ module. Disable module !!!\n");
+ printk(KERN_INFO PFX "Warning: "
+ "Unqualified SFP+ module "
+ "detected on %s, Port %d from %s part number %s\n"
+ , bp->dev->name, params->port,
+ vendor_name, vendor_pn);
return -EINVAL;
}
-
static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
- u8 module_type)
+ u16 edc_mode)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
- u8 options[SFP_EEPROM_OPTIONS_SIZE];
- u8 limiting_mode;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u16 cur_limiting_mode;
- if (bnx2x_read_sfp_module_eeprom(params,
- SFP_EEPROM_OPTIONS_ADDR,
- SFP_EEPROM_OPTIONS_SIZE,
- options) != 0) {
- DP(NETIF_MSG_LINK, "Failed to read Option field from"
- " module EEPROM\n");
- return -EINVAL;
- }
- limiting_mode = !(options[0] &
- SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK);
bnx2x_cl45_read(bp, port,
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
@@ -2550,26 +2941,23 @@
DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n",
cur_limiting_mode);
- if (limiting_mode &&
- (module_type != SFP_MODULE_TYPE_PASSIVE_COPPER_CABLE)) {
+ if (edc_mode == EDC_MODE_LIMITING) {
DP(NETIF_MSG_LINK,
- "Module options = 0x%x.Setting LIMITING MODE\n",
- options[0]);
+ "Setting LIMITING MODE\n");
bnx2x_cl45_write(bp, port,
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER2,
- SFP_LIMITING_MODE_VALUE);
+ EDC_MODE_LIMITING);
} else { /* LRM mode ( default )*/
- DP(NETIF_MSG_LINK, "Module options = 0x%x.Setting LRM MODE\n",
- options[0]);
+ DP(NETIF_MSG_LINK, "Setting LRM MODE\n");
/* Changing to LRM mode takes quite few seconds.
So do it only if current mode is limiting
( default is LRM )*/
- if (cur_limiting_mode != SFP_LIMITING_MODE_VALUE)
+ if (cur_limiting_mode != EDC_MODE_LIMITING)
return 0;
bnx2x_cl45_write(bp, port,
@@ -2600,6 +2988,54 @@
return 0;
}
+static u8 bnx2x_bcm8727_set_limiting_mode(struct link_params *params,
+ u16 edc_mode)
+{
+ struct bnx2x *bp = params->bp;
+ u8 port = params->port;
+ u16 phy_identifier;
+ u16 rom_ver2_val;
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ &phy_identifier);
+
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ (phy_identifier & ~(1<<9)));
+
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2,
+ &rom_ver2_val);
+ /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2,
+ (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff));
+
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ (phy_identifier | (1<<9)));
+
+ return 0;
+}
+
+
static u8 bnx2x_wait_for_sfp_module_initialized(struct link_params *params)
{
u8 val;
@@ -2619,61 +3055,112 @@
return -EINVAL;
}
+static void bnx2x_8727_power_module(struct bnx2x *bp,
+ struct link_params *params,
+ u8 ext_phy_addr, u8 is_power_up) {
+ /* Make sure GPIOs are not using for LED mode */
+ u16 val;
+ u8 port = params->port;
+ /*
+ * In the GPIO register, bit 4 is use to detemine if the GPIOs are
+ * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for
+ * output
+ * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0
+ * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1
+ * where the 1st bit is the over-current(only input), and 2nd bit is
+ * for power( only output )
+ */
+
+ /*
+ * In case of NOC feature is disabled and power is up, set GPIO control
+ * as input to enable listening of over-current indication
+ */
+
+ if (!(params->feature_config_flags &
+ FEATURE_CONFIG_BCM8727_NOC) && is_power_up)
+ val = (1<<4);
+ else
+ /*
+ * Set GPIO control to OUTPUT, and set the power bit
+ * to according to the is_power_up
+ */
+ val = ((!(is_power_up)) << 1);
+
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_GPIO_CTRL,
+ val);
+}
+
static u8 bnx2x_sfp_module_detection(struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u8 module_type;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u16 edc_mode;
+ u8 rc = 0;
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
-
- if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) {
- DP(NETIF_MSG_LINK, "Module detection is not required "
- "for this phy\n");
- return 0;
- }
+ u32 val = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].config));
DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n",
params->port);
- if (bnx2x_get_sfp_module_type(params,
- &module_type) != 0) {
+ if (bnx2x_get_edc_mode(params, &edc_mode) != 0) {
DP(NETIF_MSG_LINK, "Failed to get valid module type\n");
- if (!(params->feature_config_flags &
- FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED)) {
- /* In case module detection is disabled, it trys to
- link up. The issue that can happen here is LRM /
- LIMITING mode which set according to the module-type*/
- DP(NETIF_MSG_LINK, "Unable to read module-type."
- "Probably due to Bit Stretching."
- " Proceeding...\n");
- } else {
- return -EINVAL;
- }
- } else if (bnx2x_verify_sfp_module(params, module_type) !=
+ return -EINVAL;
+ } else if (bnx2x_verify_sfp_module(params) !=
0) {
/* check SFP+ module compatibility */
DP(NETIF_MSG_LINK, "Module verification failed!!\n");
+ rc = -EINVAL;
/* Turn on fault module-detected led */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
MISC_REGISTERS_GPIO_HIGH,
params->port);
- return -EINVAL;
+ if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) &&
+ ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN)) {
+ /* Shutdown SFP+ module */
+ DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n");
+ bnx2x_8727_power_module(bp, params,
+ ext_phy_addr, 0);
+ return rc;
+ }
+ } else {
+ /* Turn off fault module-detected led */
+ DP(NETIF_MSG_LINK, "Turn off fault module-detected led\n");
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+ MISC_REGISTERS_GPIO_LOW,
+ params->port);
}
- /* Turn off fault module-detected led */
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
- MISC_REGISTERS_GPIO_LOW,
- params->port);
+ /* power up the SFP module */
+ if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727)
+ bnx2x_8727_power_module(bp, params, ext_phy_addr, 1);
- /* Check and set limiting mode / LRM mode */
- bnx2x_bcm8726_set_limiting_mode(params, module_type);
+ /* Check and set limiting mode / LRM mode on 8726.
+ On 8727 it is done automatically */
+ if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726)
+ bnx2x_bcm8726_set_limiting_mode(params, edc_mode);
+ else
+ bnx2x_bcm8727_set_limiting_mode(params, edc_mode);
+ /*
+ * Enable transmit for this module if the module is approved, or
+ * if unapproved modules should also enable the Tx laser
+ */
+ if (rc == 0 ||
+ (val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) !=
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+ bnx2x_sfp_set_transmitter(bp, params->port,
+ ext_phy_type, ext_phy_addr, 1);
+ else
+ bnx2x_sfp_set_transmitter(bp, params->port,
+ ext_phy_type, ext_phy_addr, 0);
- /* Enable transmit for this module */
- bnx2x_bcm8726_set_transmitter(bp, params->port,
- ext_phy_addr, 1);
- return 0;
+ return rc;
}
void bnx2x_handle_module_detect_int(struct link_params *params)
@@ -2681,6 +3168,7 @@
struct bnx2x *bp = params->bp;
u32 gpio_val;
u8 port = params->port;
+
/* Set valid module led off */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
MISC_REGISTERS_GPIO_HIGH,
@@ -2696,22 +3184,30 @@
MISC_REGISTERS_GPIO_INT_OUTPUT_CLR,
port);
- if (bnx2x_wait_for_sfp_module_initialized(params)
- == 0)
+ if (bnx2x_wait_for_sfp_module_initialized(params) ==
+ 0)
bnx2x_sfp_module_detection(params);
else
DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");
} else {
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
+ u32 ext_phy_type =
+ XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+ u32 val = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].
+ config));
+
bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
port);
/* Module was plugged out. */
/* Disable transmit for this module */
- bnx2x_bcm8726_set_transmitter(bp, params->port,
- ext_phy_addr, 0);
+ if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+ bnx2x_sfp_set_transmitter(bp, params->port,
+ ext_phy_type, ext_phy_addr, 0);
}
}
@@ -2719,9 +3215,7 @@
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* Force KR or KX */
@@ -2742,14 +3236,13 @@
MDIO_AN_REG_CTRL,
0x0000);
}
+
static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
u16 val;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
bnx2x_cl45_read(bp, params->port,
@@ -2811,12 +3304,9 @@
static void bnx2x_8073_set_pause_cl37(struct link_params *params,
struct link_vars *vars)
{
-
struct bnx2x *bp = params->bp;
u16 cl37_val;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
bnx2x_cl45_read(bp, params->port,
@@ -2859,9 +3349,7 @@
{
struct bnx2x *bp = params->bp;
u16 val;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* read modify write pause advertizing */
@@ -2918,10 +3406,136 @@
}
}
-static void bnx2x_init_internal_phy(struct link_params *params,
- struct link_vars *vars)
+
+static void bnx2x_8481_set_led4(struct link_params *params,
+ u32 ext_phy_type, u8 ext_phy_addr)
{
struct bnx2x *bp = params->bp;
+
+ /* PHYC_CTL_LED_CTL */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL, 0xa482);
+
+ /* Unmask LED4 for 10G link */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_SIGNAL_MASK, (1<<6));
+ /* 'Interrupt Mask' */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ 0xFFFB, 0xFFFD);
+}
+static void bnx2x_8481_set_legacy_led_mode(struct link_params *params,
+ u32 ext_phy_type, u8 ext_phy_addr)
+{
+ struct bnx2x *bp = params->bp;
+
+ /* LED1 (10G Link): Disable LED1 when 10/100/1000 link */
+ /* LED2 (1G/100/10 Link): Enable LED2 when 10/100/1000 link) */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_SHADOW,
+ (1<<15) | (0xd << 10) | (0xc<<4) | 0xe);
+}
+
+static void bnx2x_8481_set_10G_led_mode(struct link_params *params,
+ u32 ext_phy_type, u8 ext_phy_addr)
+{
+ struct bnx2x *bp = params->bp;
+ u16 val1;
+
+ /* LED1 (10G Link) */
+ /* Enable continuse based on source 7(10G-link) */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ &val1);
+ /* Set bit 2 to 0, and bits [1:0] to 10 */
+ val1 &= ~((1<<0) | (1<<2)); /* Clear bits 0,2*/
+ val1 |= (1<<1); /* Set bit 1 */
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ val1);
+
+ /* Unmask LED1 for 10G link */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED1_MASK,
+ &val1);
+ /* Set bit 2 to 0, and bits [1:0] to 10 */
+ val1 |= (1<<7);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED1_MASK,
+ val1);
+
+ /* LED2 (1G/100/10G Link) */
+ /* Mask LED2 for 10G link */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED2_MASK,
+ 0);
+
+ /* LED3 (10G/1G/100/10G Activity) */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ &val1);
+ /* Enable blink based on source 4(Activity) */
+ val1 &= ~((1<<7) | (1<<8)); /* Clear bits 7,8 */
+ val1 |= (1<<6); /* Set only bit 6 */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LINK_SIGNAL,
+ val1);
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED3_MASK,
+ &val1);
+ val1 |= (1<<4); /* Unmask LED3 for 10G link */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8481_LED3_MASK,
+ val1);
+}
+
+
+static void bnx2x_init_internal_phy(struct link_params *params,
+ struct link_vars *vars,
+ u8 enable_cl73)
+{
+ struct bnx2x *bp = params->bp;
+
if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
@@ -2934,7 +3548,7 @@
DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
/* disable autoneg */
- bnx2x_set_autoneg(params, vars);
+ bnx2x_set_autoneg(params, vars, 0);
/* program speed and duplex */
bnx2x_program_serdes(params, vars);
@@ -2950,10 +3564,10 @@
vars->ieee_fc);
/* enable autoneg */
- bnx2x_set_autoneg(params, vars);
+ bnx2x_set_autoneg(params, vars, enable_cl73);
/* enable and restart AN */
- bnx2x_restart_autoneg(params);
+ bnx2x_restart_autoneg(params, enable_cl73);
}
} else { /* SGMII mode */
@@ -2972,10 +3586,9 @@
u16 ctrl = 0;
u16 val = 0;
u8 rc = 0;
+
if (vars->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* Make sure that the soft reset is off (expect for the 8072:
@@ -3160,6 +3773,9 @@
driver is loaded, it reset all registers, including the
transmitter */
bnx2x_sfp_module_detection(params);
+
+ /* Set Flow control */
+ bnx2x_ext_phy_set_pause(params, vars);
if (params->req_line_speed == SPEED_1000) {
DP(NETIF_MSG_LINK, "Setting 1G force\n");
bnx2x_cl45_write(bp, params->port, ext_phy_type,
@@ -3267,14 +3883,12 @@
bnx2x_8073_set_pause_cl37(params, vars);
if (ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)
bnx2x_bcm8072_external_rom_boot(params);
- } else {
-
+ else
/* In case of 8073 with long xaui lines,
don't set the 8073 xaui low power*/
bnx2x_bcm8073_set_xaui_low_power_mode(params);
- }
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
@@ -3339,10 +3953,8 @@
ext_phy_addr,
MDIO_AN_DEVAD,
MDIO_AN_REG_ADV, val);
-
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
@@ -3450,6 +4062,187 @@
((val & (1<<7)) > 0));
break;
}
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ {
+ u16 tmp1;
+ u16 rx_alarm_ctrl_val;
+ u16 lasi_ctrl_val;
+
+ /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
+
+ u16 mod_abs;
+ rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
+ lasi_ctrl_val = 0x0004;
+
+ DP(NETIF_MSG_LINK, "Initializing BCM8727\n");
+ /* enable LASI */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM_CTRL,
+ rx_alarm_ctrl_val);
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LASI_CTRL,
+ lasi_ctrl_val);
+
+ /* Initially configure MOD_ABS to interrupt when
+ module is presence( bit 8) */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
+ /* Set EDC off by setting OPTXLOS signal input to low
+ (bit 9).
+ When the EDC is off it locks onto a reference clock and
+ avoids becoming 'lost'.*/
+ mod_abs &= ~((1<<8) | (1<<9));
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
+
+ /* Make MOD_ABS give interrupt on change */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ &val);
+ val |= (1<<12);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ val);
+
+ /* Set 8727 GPIOs to input to allow reading from the
+ 8727 GPIO0 status which reflect SFP+ module
+ over-current */
+
+ bnx2x_cl45_read(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ &val);
+ val &= 0xff8f; /* Reset bits 4-6 */
+ bnx2x_cl45_write(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+ val);
+
+ bnx2x_8727_power_module(bp, params, ext_phy_addr, 1);
+ bnx2x_bcm8073_set_xaui_low_power_mode(params);
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_M8051_MSGOUT_REG,
+ &tmp1);
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM, &tmp1);
+
+ /* Set option 1G speed */
+ if (params->req_line_speed == SPEED_1000) {
+
+ DP(NETIF_MSG_LINK, "Setting 1G force\n");
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL, 0x40);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_10G_CTRL2, 0xD);
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_10G_CTRL2, &tmp1);
+ DP(NETIF_MSG_LINK, "1.7 = 0x%x \n", tmp1);
+
+ } else if ((params->req_line_speed ==
+ SPEED_AUTO_NEG) &&
+ ((params->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
+
+ DP(NETIF_MSG_LINK, "Setting 1G clause37 \n");
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_AN_DEVAD,
+ MDIO_PMA_REG_8727_MISC_CTRL, 0);
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_AN_DEVAD,
+ MDIO_AN_REG_CL37_AN, 0x1300);
+ } else {
+ /* Since the 8727 has only single reset pin,
+ need to set the 10G registers although it is
+ default */
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_AN_DEVAD,
+ MDIO_AN_REG_CTRL, 0x0020);
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_AN_DEVAD,
+ 0x7, 0x0100);
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL, 0x2040);
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_10G_CTRL2, 0x0008);
+ }
+
+ /* Set 2-wire transfer rate to 400Khz since 100Khz
+ is not operational */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR,
+ 0xa101);
+
+ /* Set TX PreEmphasis if needed */
+ if ((params->feature_config_flags &
+ FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
+ DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
+ "TX_CTRL2 0x%x\n",
+ params->xgxs_config_tx[0],
+ params->xgxs_config_tx[1]);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_TX_CTRL1,
+ params->xgxs_config_tx[0]);
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_TX_CTRL2,
+ params->xgxs_config_tx[1]);
+ }
+
+ break;
+ }
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
{
u16 fw_ver1, fw_ver2;
@@ -3495,20 +4288,112 @@
bnx2x_save_spirom_version(params->bp, params->port,
params->shmem_base,
(u32)(fw_ver1<<16 | fw_ver2));
-
break;
}
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
- DP(NETIF_MSG_LINK,
- "Setting the BCM8481 LASI control\n");
+ /* This phy uses the NIG latch mechanism since link
+ indication arrives through its LED4 and not via
+ its LASI signal, so we get steady signal
+ instead of clear on read */
+ bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
+ 1 << NIG_LATCH_BC_ENABLE_MI_INT);
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_LASI_CTRL, 0x1);
+ bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr);
+ if (params->req_line_speed == SPEED_AUTO_NEG) {
- /* Restart autoneg */
+ u16 autoneg_val, an_1000_val, an_10_100_val;
+ /* set 1000 speed advertisement */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_1000T_CTRL,
+ &an_1000_val);
+
+ if (params->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+ an_1000_val |= (1<<8);
+ if (params->req_duplex == DUPLEX_FULL)
+ an_1000_val |= (1<<9);
+ DP(NETIF_MSG_LINK, "Advertising 1G\n");
+ } else
+ an_1000_val &= ~((1<<8) | (1<<9));
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_1000T_CTRL,
+ an_1000_val);
+
+ /* set 100 speed advertisement */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_AN_ADV,
+ &an_10_100_val);
+
+ if (params->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
+ an_10_100_val |= (1<<7);
+ if (params->req_duplex == DUPLEX_FULL)
+ an_10_100_val |= (1<<8);
+ DP(NETIF_MSG_LINK,
+ "Advertising 100M\n");
+ } else
+ an_10_100_val &= ~((1<<7) | (1<<8));
+
+ /* set 10 speed advertisement */
+ if (params->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
+ an_10_100_val |= (1<<5);
+ if (params->req_duplex == DUPLEX_FULL)
+ an_10_100_val |= (1<<6);
+ DP(NETIF_MSG_LINK, "Advertising 10M\n");
+ }
+ else
+ an_10_100_val &= ~((1<<5) | (1<<6));
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_AN_ADV,
+ an_10_100_val);
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+ &autoneg_val);
+
+ /* Disable forced speed */
+ autoneg_val &= ~(1<<6|1<<13);
+
+ /* Enable autoneg and restart autoneg
+ for legacy speeds */
+ autoneg_val |= (1<<9|1<<12);
+
+ if (params->req_duplex == DUPLEX_FULL)
+ autoneg_val |= (1<<8);
+ else
+ autoneg_val &= ~(1<<8);
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+ autoneg_val);
+
+ if (params->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+ DP(NETIF_MSG_LINK, "Advertising 10G\n");
+ /* Restart autoneg for 10G*/
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
@@ -3520,12 +4405,81 @@
ext_phy_addr,
MDIO_AN_DEVAD,
MDIO_AN_REG_CTRL, val);
+ }
+ } else {
+ /* Force speed */
+ u16 autoneg_ctrl, pma_ctrl;
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+ &autoneg_ctrl);
- bnx2x_save_bcm_spirom_ver(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- params->shmem_base);
+ /* Disable autoneg */
+ autoneg_ctrl &= ~(1<<12);
+ /* Set 1000 force */
+ switch (params->req_line_speed) {
+ case SPEED_10000:
+ DP(NETIF_MSG_LINK,
+ "Unable to set 10G force !\n");
+ break;
+ case SPEED_1000:
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL,
+ &pma_ctrl);
+ autoneg_ctrl &= ~(1<<13);
+ autoneg_ctrl |= (1<<6);
+ pma_ctrl &= ~(1<<13);
+ pma_ctrl |= (1<<6);
+ DP(NETIF_MSG_LINK,
+ "Setting 1000M force\n");
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL,
+ pma_ctrl);
+ break;
+ case SPEED_100:
+ autoneg_ctrl |= (1<<13);
+ autoneg_ctrl &= ~(1<<6);
+ DP(NETIF_MSG_LINK,
+ "Setting 100M force\n");
+ break;
+ case SPEED_10:
+ autoneg_ctrl &= ~(1<<13);
+ autoneg_ctrl &= ~(1<<6);
+ DP(NETIF_MSG_LINK,
+ "Setting 10M force\n");
+ break;
+ }
+
+ /* Duplex mode */
+ if (params->req_duplex == DUPLEX_FULL) {
+ autoneg_ctrl |= (1<<8);
+ DP(NETIF_MSG_LINK,
+ "Setting full duplex\n");
+ } else
+ autoneg_ctrl &= ~(1<<8);
+
+ /* Update autoneg ctrl and pma ctrl */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+ autoneg_ctrl);
+ }
+
+ /* Save spirom version */
+ bnx2x_save_8481_spirom_version(bp, params->port,
+ ext_phy_addr,
+ params->shmem_base);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
DP(NETIF_MSG_LINK,
@@ -3561,9 +4515,101 @@
return rc;
}
+static void bnx2x_8727_handle_mod_abs(struct link_params *params)
+{
+ struct bnx2x *bp = params->bp;
+ u16 mod_abs, rx_alarm_status;
+ u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+ u32 val = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].
+ config));
+ bnx2x_cl45_read(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
+ if (mod_abs & (1<<8)) {
+
+ /* Module is absent */
+ DP(NETIF_MSG_LINK, "MOD_ABS indication "
+ "show module is absent\n");
+
+ /* 1. Set mod_abs to detect next module
+ presence event
+ 2. Set EDC off by setting OPTXLOS signal input to low
+ (bit 9).
+ When the EDC is off it locks onto a reference clock and
+ avoids becoming 'lost'.*/
+ mod_abs &= ~((1<<8)|(1<<9));
+ bnx2x_cl45_write(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
+
+ /* Clear RX alarm since it stays up as long as
+ the mod_abs wasn't changed */
+ bnx2x_cl45_read(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+
+ } else {
+ /* Module is present */
+ DP(NETIF_MSG_LINK, "MOD_ABS indication "
+ "show module is present\n");
+ /* First thing, disable transmitter,
+ and if the module is ok, the
+ module_detection will enable it*/
+
+ /* 1. Set mod_abs to detect next module
+ absent event ( bit 8)
+ 2. Restore the default polarity of the OPRXLOS signal and
+ this signal will then correctly indicate the presence or
+ absence of the Rx signal. (bit 9) */
+ mod_abs |= ((1<<8)|(1<<9));
+ bnx2x_cl45_write(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
+
+ /* Clear RX alarm since it stays up as long as
+ the mod_abs wasn't changed. This is need to be done
+ before calling the module detection, otherwise it will clear
+ the link update alarm */
+ bnx2x_cl45_read(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+
+
+ if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+ bnx2x_sfp_set_transmitter(bp, params->port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr, 0);
+
+ if (bnx2x_wait_for_sfp_module_initialized(params)
+ == 0)
+ bnx2x_sfp_module_detection(params);
+ else
+ DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");
+ }
+
+ DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n",
+ rx_alarm_status);
+ /* No need to check link status in case of
+ module plugged in/out */
+}
+
static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
- struct link_vars *vars)
+ struct link_vars *vars,
+ u8 is_mi_int)
{
struct bnx2x *bp = params->bp;
u32 ext_phy_type;
@@ -3572,11 +4618,9 @@
u16 rx_sd, pcs_status;
u8 ext_phy_link_up = 0;
u8 port = params->port;
- if (vars->phy_flags & PHY_XGXS_FLAG) {
- ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ if (vars->phy_flags & PHY_XGXS_FLAG) {
+ ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
@@ -3602,8 +4646,19 @@
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_RX_SD, &rx_sd);
- DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
- ext_phy_link_up = (rx_sd & 0x1);
+
+ bnx2x_cl45_read(bp, params->port, ext_phy_type,
+ ext_phy_addr,
+ 1,
+ 0xc809, &val1);
+ bnx2x_cl45_read(bp, params->port, ext_phy_type,
+ ext_phy_addr,
+ 1,
+ 0xc809, &val1);
+
+ DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1);
+ ext_phy_link_up = ((rx_sd & 0x1) && (val1 & (1<<9))
+ && ((val1 & (1<<8)) == 0));
if (ext_phy_link_up)
vars->line_speed = SPEED_10000;
break;
@@ -3672,19 +4727,172 @@
break;
}
}
-
if (val2 & (1<<1))
vars->line_speed = SPEED_1000;
else
vars->line_speed = SPEED_10000;
}
-
break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ {
+ u16 link_status = 0;
+ u16 rx_alarm_status;
+ /* Check the LASI */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+
+ DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n",
+ rx_alarm_status);
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LASI_STATUS, &val1);
+
+ DP(NETIF_MSG_LINK,
+ "8727 LASI status 0x%x\n",
+ val1);
+
+ /* Clear MSG-OUT */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_M8051_MSGOUT_REG,
+ &val1);
+
+ /*
+ * If a module is present and there is need to check
+ * for over current
+ */
+ if (!(params->feature_config_flags &
+ FEATURE_CONFIG_BCM8727_NOC) &&
+ !(rx_alarm_status & (1<<5))) {
+ /* Check over-current using 8727 GPIO0 input*/
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_GPIO_CTRL,
+ &val1);
+
+ if ((val1 & (1<<8)) == 0) {
+ DP(NETIF_MSG_LINK, "8727 Power fault"
+ " has been detected on "
+ "port %d\n",
+ params->port);
+ printk(KERN_ERR PFX "Error: Power"
+ " fault on %s Port %d has"
+ " been detected and the"
+ " power to that SFP+ module"
+ " has been removed to prevent"
+ " failure of the card. Please"
+ " remove the SFP+ module and"
+ " restart the system to clear"
+ " this error.\n"
+ , bp->dev->name, params->port);
+ /*
+ * Disable all RX_ALARMs except for
+ * mod_abs
+ */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM_CTRL,
+ (1<<5));
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ &val1);
+ /* Wait for module_absent_event */
+ val1 |= (1<<8);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ val1);
+ /* Clear RX alarm */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM,
+ &rx_alarm_status);
+ break;
+ }
+ } /* Over current check */
+
+ /* When module absent bit is set, check module */
+ if (rx_alarm_status & (1<<5)) {
+ bnx2x_8727_handle_mod_abs(params);
+ /* Enable all mod_abs and link detection bits */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM_CTRL,
+ ((1<<5) | (1<<2)));
+ }
+
+ /* If transmitter is disabled,
+ ignore false link up indication */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_PHY_IDENTIFIER,
+ &val1);
+ if (val1 & (1<<15)) {
+ DP(NETIF_MSG_LINK, "Tx is disabled\n");
+ ext_phy_link_up = 0;
+ break;
+ }
+
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+ &link_status);
+
+ /* Bits 0..2 --> speed detected,
+ bits 13..15--> link is down */
+ if ((link_status & (1<<2)) &&
+ (!(link_status & (1<<15)))) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_10000;
+ } else if ((link_status & (1<<0)) &&
+ (!(link_status & (1<<13)))) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_1000;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " up in 1G\n", params->port);
+ } else {
+ ext_phy_link_up = 0;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " is down\n", params->port);
+ }
+ break;
+ }
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
{
u16 link_status = 0;
u16 an1000_status = 0;
+
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
bnx2x_cl45_read(bp, params->port,
@@ -3700,7 +4908,6 @@
DP(NETIF_MSG_LINK,
"870x LASI status 0x%x->0x%x\n",
val1, val2);
-
} else {
/* In 8073, port1 is directed through emac0 and
* port0 is directed through emac1
@@ -3830,8 +5037,6 @@
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CDR_BANDWIDTH,
0x0333);
-
-
}
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
@@ -3943,51 +5148,79 @@
}
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
- /* Clear LASI interrupt */
- bnx2x_cl45_read(bp, params->port,
- ext_phy_type,
+ /* Check 10G-BaseT link status */
+ /* Check PMD signal ok */
+ bnx2x_cl45_read(bp, params->port, ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ 0xFFFA,
+ &val1);
+ bnx2x_cl45_read(bp, params->port, ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_LASI_STATUS, &val1);
- DP(NETIF_MSG_LINK, "8481 LASI status reg = 0x%x\n",
- val1);
+ MDIO_PMA_REG_8481_PMD_SIGNAL,
+ &val2);
+ DP(NETIF_MSG_LINK, "PMD_SIGNAL 1.a811 = 0x%x\n", val2);
- /* Check 10G-BaseT link status */
- /* Check Global PMD signal ok */
- bnx2x_cl45_read(bp, params->port, ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD,
- &rx_sd);
- /* Check PCS block lock */
- bnx2x_cl45_read(bp, params->port, ext_phy_type,
- ext_phy_addr,
- MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS,
- &pcs_status);
- DP(NETIF_MSG_LINK, "8481 1.a = 0x%x, 1.20 = 0x%x\n",
- rx_sd, pcs_status);
- if (rx_sd & pcs_status & 0x1) {
+ /* Check link 10G */
+ if (val2 & (1<<11)) {
vars->line_speed = SPEED_10000;
ext_phy_link_up = 1;
- } else {
+ bnx2x_8481_set_10G_led_mode(params,
+ ext_phy_type,
+ ext_phy_addr);
+ } else { /* Check Legacy speed link */
+ u16 legacy_status, legacy_speed;
- /* Check 1000-BaseT link status */
- bnx2x_cl45_read(bp, params->port, ext_phy_type,
- ext_phy_addr,
- MDIO_AN_DEVAD, 0xFFE1,
- &val1);
+ /* Enable expansion register 0x42
+ (Operation mode status) */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_EXPANSION_REG_ACCESS,
+ 0xf42);
- bnx2x_cl45_read(bp, params->port, ext_phy_type,
- ext_phy_addr,
- MDIO_AN_DEVAD, 0xFFE1,
- &val2);
- DP(NETIF_MSG_LINK, "8481 7.FFE1 ="
- "0x%x-->0x%x\n", val1, val2);
- if (val2 & (1<<2)) {
- vars->line_speed = SPEED_1000;
- ext_phy_link_up = 1;
+ /* Get legacy speed operation status */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
+ &legacy_status);
+
+ DP(NETIF_MSG_LINK, "Legacy speed status"
+ " = 0x%x\n", legacy_status);
+ ext_phy_link_up = ((legacy_status & (1<<11))
+ == (1<<11));
+ if (ext_phy_link_up) {
+ legacy_speed = (legacy_status & (3<<9));
+ if (legacy_speed == (0<<9))
+ vars->line_speed = SPEED_10;
+ else if (legacy_speed == (1<<9))
+ vars->line_speed =
+ SPEED_100;
+ else if (legacy_speed == (2<<9))
+ vars->line_speed =
+ SPEED_1000;
+ else /* Should not happen */
+ vars->line_speed = 0;
+
+ if (legacy_status & (1<<8))
+ vars->duplex = DUPLEX_FULL;
+ else
+ vars->duplex = DUPLEX_HALF;
+
+ DP(NETIF_MSG_LINK, "Link is up "
+ "in %dMbps, is_duplex_full"
+ "= %d\n",
+ vars->line_speed,
+ (vars->duplex == DUPLEX_FULL));
+ bnx2x_8481_set_legacy_led_mode(params,
+ ext_phy_type,
+ ext_phy_addr);
}
}
-
break;
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
@@ -3995,6 +5228,13 @@
ext_phy_link_up = 0;
break;
}
+ /* Set SGMII mode for external phy */
+ if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
+ if (vars->line_speed < SPEED_1000)
+ vars->phy_flags |= PHY_SGMII_FLAG;
+ else
+ vars->phy_flags &= ~PHY_SGMII_FLAG;
+ }
} else { /* SerDes */
ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
@@ -4027,6 +5267,7 @@
u32 ext_phy_type;
u32 mask;
struct bnx2x *bp = params->bp;
+
/* setting the status to report on link up
for either XGXS or SerDes */
@@ -4058,10 +5299,10 @@
bnx2x_bits_en(bp,
NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
mask);
- DP(NETIF_MSG_LINK, "port %x, is_xgxs=%x, int_status 0x%x\n", port,
+
+ DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port,
(params->switch_cfg == SWITCH_CFG_10G),
REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
-
DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n",
REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
@@ -4071,12 +5312,47 @@
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
}
-
+static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port,
+ u8 is_mi_int)
+{
+ u32 latch_status = 0, is_mi_int_status;
+ /* Disable the MI INT ( external phy int )
+ * by writing 1 to the status register. Link down indication
+ * is high-active-signal, so in this case we need to write the
+ * status to clear the XOR
+ */
+ /* Read Latched signals */
+ latch_status = REG_RD(bp,
+ NIG_REG_LATCH_STATUS_0 + port*8);
+ is_mi_int_status = REG_RD(bp,
+ NIG_REG_STATUS_INTERRUPT_PORT0 + port*4);
+ DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x,"
+ "latch_status = 0x%x\n",
+ is_mi_int, is_mi_int_status, latch_status);
+ /* Handle only those with latched-signal=up.*/
+ if (latch_status & 1) {
+ /* For all latched-signal=up,Write original_signal to status */
+ if (is_mi_int)
+ bnx2x_bits_en(bp,
+ NIG_REG_STATUS_INTERRUPT_PORT0
+ + port*4,
+ NIG_STATUS_EMAC0_MI_INT);
+ else
+ bnx2x_bits_dis(bp,
+ NIG_REG_STATUS_INTERRUPT_PORT0
+ + port*4,
+ NIG_STATUS_EMAC0_MI_INT);
+ /* For all latched-signal=up : Re-Arm Latch signals */
+ REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8,
+ (latch_status & 0xfffe) | (latch_status & 1));
+ }
+}
/*
* link management
*/
static void bnx2x_link_int_ack(struct link_params *params,
- struct link_vars *vars, u8 is_10g)
+ struct link_vars *vars, u8 is_10g,
+ u8 is_mi_int)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
@@ -4087,6 +5363,10 @@
(NIG_STATUS_XGXS0_LINK10G |
NIG_STATUS_XGXS0_LINK_STATUS |
NIG_STATUS_SERDES0_LINK_STATUS));
+ if (XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+ == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) {
+ bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int);
+ }
if (vars->phy_link_up) {
if (is_10g) {
/* Disable the 10G link interrupt
@@ -4106,7 +5386,8 @@
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
- DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
+ DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n",
+ vars->line_speed);
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
((1 << ser_lane) <<
@@ -4156,66 +5437,13 @@
return 0;
}
-
-static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
- u32 ext_phy_type)
-{
- u32 cnt = 0;
- u16 ctrl = 0;
- /* Enable EMAC0 in to enable MDIO */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
- msleep(5);
-
- /* take ext phy out of reset */
- bnx2x_set_gpio(bp,
- MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_HIGH,
- port);
-
- bnx2x_set_gpio(bp,
- MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_HIGH,
- port);
-
- /* wait for 5ms */
- msleep(5);
-
- for (cnt = 0; cnt < 1000; cnt++) {
- msleep(1);
- bnx2x_cl45_read(bp, port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_CTRL,
- &ctrl);
- if (!(ctrl & (1<<15))) {
- DP(NETIF_MSG_LINK, "Reset completed\n\n");
- break;
- }
- }
-}
-
-static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
-{
- /* put sf to reset */
- bnx2x_set_gpio(bp,
- MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_LOW,
- port);
- bnx2x_set_gpio(bp,
- MISC_REGISTERS_GPIO_2,
- MISC_REGISTERS_GPIO_LOW,
- port);
-}
-
u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
u8 *version, u16 len)
{
struct bnx2x *bp;
u32 ext_phy_type = 0;
u32 spirom_ver = 0;
- u8 status = 0 ;
+ u8 status;
if (version == NULL || params == NULL)
return -EINVAL;
@@ -4225,6 +5453,7 @@
offsetof(struct shmem_region,
port_mb[params->port].ext_phy_fw_version));
+ status = 0;
/* reset the returned value to zero */
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
switch (ext_phy_type) {
@@ -4242,13 +5471,19 @@
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ status = bnx2x_format_ver(spirom_ver, version, len);
+ break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+ spirom_ver = ((spirom_ver & 0xF80) >> 7) << 16 |
+ (spirom_ver & 0x7F);
status = bnx2x_format_ver(spirom_ver, version, len);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ version[0] = '\0';
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
@@ -4331,10 +5566,8 @@
if (params->switch_cfg == SWITCH_CFG_10G) {
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+ ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
/* CL37 Autoneg Enabled */
- ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
@@ -4501,6 +5734,7 @@
u8 rc = 0;
u32 tmp;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
speed, hw_led_mode);
@@ -4565,7 +5799,7 @@
&gp_status);
/* link is up only if both local phy and external phy are up */
if ((gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) &&
- bnx2x_ext_phy_is_link_up(params, vars))
+ bnx2x_ext_phy_is_link_up(params, vars, 1))
return 0;
return -ESRCH;
@@ -4579,6 +5813,7 @@
u8 rc = 0;
u8 non_ext_phy;
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
/* Activate the external PHY */
bnx2x_ext_phy_reset(params, vars);
@@ -4630,11 +5865,10 @@
if (non_ext_phy ||
(ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
(ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
- (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) ||
(params->loopback_mode == LOOPBACK_EXT_PHY)) {
if (params->req_line_speed == SPEED_AUTO_NEG)
bnx2x_set_parallel_detection(params, vars->phy_flags);
- bnx2x_init_internal_phy(params, vars);
+ bnx2x_init_internal_phy(params, vars, non_ext_phy);
}
if (!non_ext_phy)
@@ -4653,11 +5887,11 @@
u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
-
u32 val;
- DP(NETIF_MSG_LINK, "Phy Initialization started \n");
- DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
- params->req_line_speed, params->req_flow_ctrl);
+
+ DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+ DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n",
+ params->req_line_speed, params->req_flow_ctrl);
vars->link_status = 0;
vars->phy_link_up = 0;
vars->link_up = 0;
@@ -4671,7 +5905,6 @@
else
vars->phy_flags = PHY_XGXS_FLAG;
-
/* disable attentions */
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
(NIG_MASK_XGXS0_LINK_STATUS |
@@ -4682,6 +5915,7 @@
bnx2x_emac_init(params, vars);
if (CHIP_REV_IS_FPGA(bp)) {
+
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
@@ -4690,7 +5924,8 @@
/* enable on E1.5 FPGA */
if (CHIP_IS_E1H(bp)) {
vars->flow_ctrl |=
- (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX);
+ (BNX2X_FLOW_CTRL_TX |
+ BNX2X_FLOW_CTRL_RX);
vars->link_status |=
(LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
@@ -4699,8 +5934,7 @@
bnx2x_emac_enable(params, vars, 0);
bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
/* disable drain */
- REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
- + params->port*4, 0);
+ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
/* update shared memory */
bnx2x_update_mng(params, vars->link_status);
@@ -4730,6 +5964,7 @@
} else
if (params->loopback_mode == LOOPBACK_BMAC) {
+
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
@@ -4744,7 +5979,9 @@
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
params->port*4, 0);
+
} else if (params->loopback_mode == LOOPBACK_EMAC) {
+
vars->link_up = 1;
vars->line_speed = SPEED_1000;
vars->duplex = DUPLEX_FULL;
@@ -4760,8 +5997,10 @@
vars->duplex);
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
params->port*4, 0);
+
} else if ((params->loopback_mode == LOOPBACK_XGXS_10) ||
- (params->loopback_mode == LOOPBACK_EXT_PHY)) {
+ (params->loopback_mode == LOOPBACK_EXT_PHY)) {
+
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
@@ -4790,10 +6029,14 @@
}
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
params->port*4, 0);
+
+ bnx2x_set_led(bp, params->port, LED_MODE_OPER,
+ vars->line_speed, params->hw_led_mode,
+ params->chip_id);
+
} else
/* No loopback */
{
-
bnx2x_phy_deassert(params, vars->phy_flags);
switch (params->switch_cfg) {
case SWITCH_CFG_1G:
@@ -4801,8 +6044,7 @@
if ((params->ext_phy_config &
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) ==
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) {
- vars->phy_flags |=
- PHY_SGMII_FLAG;
+ vars->phy_flags |= PHY_SGMII_FLAG;
}
val = REG_RD(bp,
@@ -4823,7 +6065,6 @@
default:
DP(NETIF_MSG_LINK, "Invalid switch_cfg\n");
return -EINVAL;
- break;
}
DP(NETIF_MSG_LINK, "Phy address = 0x%x\n", params->phy_addr);
@@ -4843,24 +6084,23 @@
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL, 0x0001);
-
- /* Disable Transmitter */
- bnx2x_bcm8726_set_transmitter(bp, port, ext_phy_addr, 0);
-
}
u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
u8 reset_ext_phy)
{
-
struct bnx2x *bp = params->bp;
u32 ext_phy_config = params->ext_phy_config;
u16 hw_led_mode = params->hw_led_mode;
u32 chip_id = params->chip_id;
u8 port = params->port;
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
- /* disable attentions */
+ u32 val = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].
+ config));
+ /* disable attentions */
vars->link_status = 0;
bnx2x_update_mng(params, vars->link_status);
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
@@ -4893,6 +6133,20 @@
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ {
+
+ /* Disable Transmitter */
+ u8 ext_phy_addr =
+ XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+ if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+ PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+ bnx2x_sfp_set_transmitter(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr, 0);
+ break;
+ }
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
"low power mode\n",
@@ -4903,9 +6157,8 @@
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
{
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u8 ext_phy_addr =
+ XGXS_EXT_PHY_ADDR(params->ext_phy_config);
/* Set soft reset */
bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr);
break;
@@ -4943,6 +6196,7 @@
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
+
DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
bnx2x_set_led(bp, port, LED_MODE_OFF,
0, params->hw_led_mode,
@@ -4979,6 +6233,7 @@
struct bnx2x *bp = params->bp;
u8 port = params->port;
u8 rc = 0;
+
vars->link_status |= LINK_STATUS_LINK_UP;
if (link_10g) {
bnx2x_bmac_enable(params, vars, 0);
@@ -5032,16 +6287,19 @@
u8 link_10g;
u8 ext_phy_link_up, rc = 0;
u32 ext_phy_type;
+ u8 is_mi_int = 0;
DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
- port,
- (vars->phy_flags & PHY_XGXS_FLAG),
- REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
+ port, (vars->phy_flags & PHY_XGXS_FLAG),
+ REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
+ is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT +
+ port*0x18) > 0);
DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n",
- REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
- REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
- REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c));
+ REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+ is_mi_int,
+ REG_RD(bp,
+ NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c));
DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
@@ -5053,7 +6311,7 @@
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
/* Check external link change only for non-direct */
- ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
+ ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars, is_mi_int);
/* Read gp_status */
CL45_RD_OVER_CL22(bp, port, params->phy_addr,
@@ -5061,7 +6319,8 @@
MDIO_GP_STATUS_TOP_AN_STATUS1,
&gp_status);
- rc = bnx2x_link_settings_status(params, vars, gp_status);
+ rc = bnx2x_link_settings_status(params, vars, gp_status,
+ ext_phy_link_up);
if (rc != 0)
return rc;
@@ -5073,7 +6332,7 @@
(vars->line_speed == SPEED_15000) ||
(vars->line_speed == SPEED_16000));
- bnx2x_link_int_ack(params, vars, link_10g);
+ bnx2x_link_int_ack(params, vars, link_10g, is_mi_int);
/* In case external phy link is up, and internal link is down
( not initialized yet probably after link initialization, it needs
@@ -5086,7 +6345,7 @@
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) &&
(ext_phy_link_up && !vars->phy_link_up))
- bnx2x_init_internal_phy(params, vars);
+ bnx2x_init_internal_phy(params, vars, 0);
/* link is up only if both local phy and external phy are up */
vars->link_up = (ext_phy_link_up && vars->phy_link_up);
@@ -5119,10 +6378,7 @@
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
- ext_phy_addr[port] =
- ((ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config);
/* Need to take the phy out of low power mode in order
to write to access its registers */
@@ -5217,12 +6473,81 @@
}
+static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+ u8 ext_phy_addr[PORT_MAX];
+ s8 port, first_port, i;
+ u32 swap_val, swap_override;
+ DP(NETIF_MSG_LINK, "Executing BCM8727 common init\n");
+ swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+ swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
+
+ bnx2x_ext_phy_hw_reset(bp, 1 ^ (swap_val && swap_override));
+ msleep(5);
+
+ if (swap_val && swap_override)
+ first_port = PORT_0;
+ else
+ first_port = PORT_1;
+
+ /* PART1 - Reset both phys */
+ for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) {
+ /* Extract the ext phy address for the port */
+ u32 ext_phy_config = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].external_phy_config));
+
+ /* disable attentions */
+ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ (NIG_MASK_XGXS0_LINK_STATUS |
+ NIG_MASK_XGXS0_LINK10G |
+ NIG_MASK_SERDES0_LINK_STATUS |
+ NIG_MASK_MI_INT));
+
+ ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config);
+
+ /* Reset the phy */
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL,
+ 1<<15);
+ }
+
+ /* Add delay of 150ms after reset */
+ msleep(150);
+
+ /* PART2 - Download firmware to both phys */
+ for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) {
+ u16 fw_ver1;
+
+ bnx2x_bcm8727_external_rom_boot(bp, port,
+ ext_phy_addr[port], shmem_base);
+
+ bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+ if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
+ DP(NETIF_MSG_LINK,
+ "bnx2x_8727_common_init_phy port %x:"
+ "Download failed. fw version = 0x%x\n",
+ port, fw_ver1);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
{
u8 ext_phy_addr;
u32 val;
s8 port;
+
/* Use port1 because of the static port-swap */
/* Enable the module detection interrupt */
val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN);
@@ -5230,7 +6555,7 @@
(1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
- bnx2x_hw_reset(bp, 1);
+ bnx2x_ext_phy_hw_reset(bp, 1);
msleep(5);
for (port = 0; port < PORT_MAX; port++) {
/* Extract the ext phy address for the port */
@@ -5238,10 +6563,7 @@
offsetof(struct shmem_region,
dev_info.port_hw_config[port].external_phy_config));
- ext_phy_addr =
- ((ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ ext_phy_addr = XGXS_EXT_PHY_ADDR(ext_phy_config);
DP(NETIF_MSG_LINK, "8726_common_init : ext_phy_addr = 0x%x\n",
ext_phy_addr);
@@ -5275,6 +6597,12 @@
rc = bnx2x_8073_common_init_phy(bp, shmem_base);
break;
}
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC:
+ rc = bnx2x_8727_common_init_phy(bp, shmem_base);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
/* GPIO1 affects both ports, so there's need to pull
it for single port alone */
@@ -5291,9 +6619,7 @@
return rc;
}
-
-
-static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
+void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
{
u16 val, cnt;
@@ -5323,377 +6649,3 @@
break;
}
}
-#define RESERVED_SIZE 256
-/* max application is 160K bytes - data at end of RAM */
-#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
-
-/* Header is 14 bytes */
-#define HEADER_SIZE 14
-#define DATA_OFFSET HEADER_SIZE
-
-#define SPI_START_TRANSFER(bp, port, ext_phy_addr) \
- bnx2x_cl45_write(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, \
- ext_phy_addr, \
- MDIO_PCS_DEVAD, \
- MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 1)
-
-/* Programs an image to DSP's flash via the SPI port*/
-static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
- u8 ext_phy_addr,
- char data[], u32 size)
-{
- const u16 num_trans = size/4; /* 4 bytes can be sent at a time */
- /* Doesn't include last trans!*/
- const u16 last_trans_size = size%4; /* Num bytes on last trans */
- u16 trans_cnt, byte_cnt;
- u32 data_index;
- u16 tmp;
- u16 code_started = 0;
- u16 image_revision1, image_revision2;
- u16 cnt;
-
- DP(NETIF_MSG_LINK, "bnx2x_sfx7101_flash_download file_size=%d\n", size);
- /* Going to flash*/
- if ((size-HEADER_SIZE) > MAX_APP_SIZE) {
- /* This very often will be the case, because the image is built
- with 160Kbytes size whereas the total image size must actually
- be 160Kbytes-RESERVED_SIZE */
- DP(NETIF_MSG_LINK, "Warning, file size was %d bytes "
- "truncated to %d bytes\n", size, MAX_APP_SIZE);
- size = MAX_APP_SIZE+HEADER_SIZE;
- }
- DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
- DP(NETIF_MSG_LINK, " %c%c\n", data[0x150], data[0x151]);
- /* Put the DSP in download mode by setting FLASH_CFG[2] to 1
- and issuing a reset.*/
-
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
- MISC_REGISTERS_GPIO_HIGH, port);
-
- bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
-
- /* wait 0.5 sec */
- for (cnt = 0; cnt < 100; cnt++)
- msleep(5);
-
- /* Make sure we can access the DSP
- And it's in the correct mode (waiting for download) */
-
- bnx2x_cl45_read(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_DSP_ACCESS, &tmp);
-
- if (tmp != 0x000A) {
- DP(NETIF_MSG_LINK, "DSP is not in waiting on download mode. "
- "Expected 0x000A, read 0x%04X\n", tmp);
- DP(NETIF_MSG_LINK, "Download failed\n");
- return -EINVAL;
- }
-
- /* Mux the SPI interface away from the internal processor */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_MUX, 1);
-
- /* Reset the SPI port */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 0);
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_CTRL_ADDR,
- (1<<MDIO_PCS_REG_7101_SPI_RESET_BIT));
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 0);
-
- /* Erase the flash */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
- 1);
-
- SPI_START_TRANSFER(bp, port, ext_phy_addr);
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD);
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
- 1);
- SPI_START_TRANSFER(bp, port, ext_phy_addr);
-
- /* Wait 10 seconds, the maximum time for the erase to complete */
- DP(NETIF_MSG_LINK, "Erasing flash, this takes 10 seconds...\n");
- for (cnt = 0; cnt < 1000; cnt++)
- msleep(10);
-
- DP(NETIF_MSG_LINK, "Downloading flash, please wait...\n");
- data_index = 0;
- for (trans_cnt = 0; trans_cnt < num_trans; trans_cnt++) {
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
- 1);
- SPI_START_TRANSFER(bp, port, ext_phy_addr);
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD);
-
- /* Bits 23-16 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- (data_index>>16));
- /* Bits 15-8 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- (data_index>>8));
-
- /* Bits 7-0 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- ((u16)data_index));
-
- byte_cnt = 0;
- while (byte_cnt < 4 && data_index < size) {
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- data[data_index++]);
- byte_cnt++;
- }
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
- byte_cnt+4);
-
- SPI_START_TRANSFER(bp, port, ext_phy_addr);
- msleep(5); /* Wait 5 ms minimum between transs */
-
- /* Let the user know something's going on.*/
- /* a pacifier ever 4K */
- if ((data_index % 1023) == 0)
- DP(NETIF_MSG_LINK, "Download %d%%\n", data_index/size);
- }
-
- DP(NETIF_MSG_LINK, "\n");
- /* Transfer the last block if there is data remaining */
- if (last_trans_size) {
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
- 1);
-
- SPI_START_TRANSFER(bp, port, ext_phy_addr);
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD);
-
- /* Bits 23-16 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- (data_index>>16));
- /* Bits 15-8 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- (data_index>>8));
-
- /* Bits 7-0 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- ((u16)data_index));
-
- byte_cnt = 0;
- while (byte_cnt < last_trans_size && data_index < size) {
- /* Bits 7-0 of address */
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
- data[data_index++]);
- byte_cnt++;
- }
-
- bnx2x_cl45_write(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
- byte_cnt+4);
-
- SPI_START_TRANSFER(bp, port, ext_phy_addr);
- }
-
- /* DSP Remove Download Mode */
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
- MISC_REGISTERS_GPIO_LOW, port);
-
- bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
-
- /* wait 0.5 sec to allow it to run */
- for (cnt = 0; cnt < 100; cnt++)
- msleep(5);
-
- bnx2x_hw_reset(bp, port);
-
- for (cnt = 0; cnt < 100; cnt++)
- msleep(5);
-
- /* Check that the code is started. In case the download
- checksum failed, the code won't be started. */
- bnx2x_cl45_read(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PCS_DEVAD,
- MDIO_PCS_REG_7101_DSP_ACCESS,
- &tmp);
-
- code_started = (tmp & (1<<4));
- if (!code_started) {
- DP(NETIF_MSG_LINK, "Download failed. Please check file.\n");
- return -EINVAL;
- }
-
- /* Verify that the file revision is now equal to the image
- revision within the DSP */
- bnx2x_cl45_read(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_7101_VER1,
- &image_revision1);
-
- bnx2x_cl45_read(bp, port,
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_7101_VER2,
- &image_revision2);
-
- if (data[0x14e] != (image_revision2&0xFF) ||
- data[0x14f] != ((image_revision2&0xFF00)>>8) ||
- data[0x150] != (image_revision1&0xFF) ||
- data[0x151] != ((image_revision1&0xFF00)>>8)) {
- DP(NETIF_MSG_LINK, "Download failed.\n");
- return -EINVAL;
- }
- DP(NETIF_MSG_LINK, "Download %d%%\n", data_index/size);
- return 0;
-}
-
-u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
- u8 driver_loaded, char data[], u32 size)
-{
- u8 rc = 0;
- u32 ext_phy_type;
- u8 ext_phy_addr;
- ext_phy_addr = ((ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
-
- switch (ext_phy_type) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK,
- "Flash download not supported for this ext phy\n");
- rc = -EINVAL;
- break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- /* Take ext phy out of reset */
- if (!driver_loaded)
- bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
- rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
- data, size);
- if (!driver_loaded)
- bnx2x_turn_off_sf(bp, port);
- break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
- default:
- DP(NETIF_MSG_LINK, "Invalid ext phy type\n");
- rc = -EINVAL;
- break;
- }
- return rc;
-}
-
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 19a866d..f3e2522 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -39,7 +39,13 @@
#define SPEED_15000 15000
#define SPEED_16000 16000
-
+#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
+#define SFP_EEPROM_VENDOR_NAME_SIZE 16
+#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25
+#define SFP_EEPROM_VENDOR_OUI_SIZE 3
+#define SFP_EEPROM_PART_NO_ADDR 0x28
+#define SFP_EEPROM_PART_NO_SIZE 16
+#define PWR_FLT_ERR_MSG_LEN 250
/***********************************************************/
/* Structs */
/***********************************************************/
@@ -75,47 +81,59 @@
#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT
u16 hw_led_mode; /* part of the hw_config read from the shmem */
+
+ /* phy_addr populated by the phy_init function */
+ u8 phy_addr;
+ /*u8 reserved1;*/
+
u32 lane_config;
u32 ext_phy_config;
-#define XGXS_EXT_PHY_TYPE(ext_phy_config) (ext_phy_config & \
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
-#define SERDES_EXT_PHY_TYPE(ext_phy_config) (ext_phy_config & \
- PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
+#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
+ ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
+#define XGXS_EXT_PHY_ADDR(ext_phy_config) \
+ (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
+#define SERDES_EXT_PHY_TYPE(ext_phy_config) \
+ ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
+
/* Phy register parameter */
u32 chip_id;
- /* phy_addr populated by the CLC */
- u8 phy_addr;
u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */
-
u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */
+
u32 feature_config_flags;
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
-#define FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED (2<<0)
+#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
+#define FEATURE_CONFIG_BCM8727_NOC (1<<3)
+
/* Device pointer passed to all callback functions */
struct bnx2x *bp;
};
/* Output parameters */
struct link_vars {
+ u8 phy_flags;
+
+ u8 mac_type;
+#define MAC_TYPE_NONE 0
+#define MAC_TYPE_EMAC 1
+#define MAC_TYPE_BMAC 2
+
u8 phy_link_up; /* internal phy link indication */
u8 link_up;
- u16 duplex;
- u16 flow_ctrl;
- u32 ieee_fc;
- u8 mac_type;
-#define MAC_TYPE_NONE 0
-#define MAC_TYPE_EMAC 1
-#define MAC_TYPE_BMAC 2
u16 line_speed;
+ u16 duplex;
+
+ u16 flow_ctrl;
+ u16 ieee_fc;
+
u32 autoneg;
#define AUTO_NEG_DISABLED 0x0
#define AUTO_NEG_ENABLED 0x1
#define AUTO_NEG_COMPLETE 0x2
-#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3
-
- u8 phy_flags;
+#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3
/* The same definitions as the shmem parameter */
u32 link_status;
@@ -167,8 +185,6 @@
u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, u32 led_idx, u32 value);
-u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
- u8 driver_loaded, char data[], u32 size);
/* bnx2x_handle_module_detect_int should be called upon module detection
interrupt */
void bnx2x_handle_module_detect_int(struct link_params *params);
@@ -180,5 +196,12 @@
/* One-time initialization for external phy after power up */
u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
+/* Reset the external PHY using GPIO */
+void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
+
+void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr);
+
+u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
+ u8 byte_cnt, u8 *o_buf);
#endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index c36a5f3..20f0ed9 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -10,7 +10,7 @@
* Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
* UDP CSUM errata workaround by Arik Gendelman
- * Slowpath rework by Vladislav Zolotarov
+ * Slowpath and fastpath rework by Vladislav Zolotarov
* Statistics and Link management by Yitchak Gertner
*
*/
@@ -56,15 +56,15 @@
#include "bnx2x_init_ops.h"
#include "bnx2x_dump.h"
-#define DRV_MODULE_VERSION "1.48.105-1"
-#define DRV_MODULE_RELDATE "2009/04/22"
+#define DRV_MODULE_VERSION "1.52.1"
+#define DRV_MODULE_RELDATE "2009/08/12"
#define BNX2X_BC_VER 0x040200
#include <linux/firmware.h>
#include "bnx2x_fw_file_hdr.h"
/* FW files */
-#define FW_FILE_PREFIX_E1 "bnx2x-e1-"
-#define FW_FILE_PREFIX_E1H "bnx2x-e1h-"
+#define FW_FILE_PREFIX_E1 "bnx2x-e1-"
+#define FW_FILE_PREFIX_E1H "bnx2x-e1h-"
/* Time in jiffies before concluding the transmitter is hung */
#define TX_TIMEOUT (5*HZ)
@@ -80,7 +80,18 @@
static int multi_mode = 1;
module_param(multi_mode, int, 0);
-MODULE_PARM_DESC(multi_mode, " Use per-CPU queues");
+MODULE_PARM_DESC(multi_mode, " Multi queue mode "
+ "(0 Disable; 1 Enable (default))");
+
+static int num_rx_queues;
+module_param(num_rx_queues, int, 0);
+MODULE_PARM_DESC(num_rx_queues, " Number of Rx queues for multi_mode=1"
+ " (default is half number of CPUs)");
+
+static int num_tx_queues;
+module_param(num_tx_queues, int, 0);
+MODULE_PARM_DESC(num_tx_queues, " Number of Tx queues for multi_mode=1"
+ " (default is half number of CPUs)");
static int disable_tpa;
module_param(disable_tpa, int, 0);
@@ -90,6 +101,10 @@
module_param(int_mode, int, 0);
MODULE_PARM_DESC(int_mode, " Force interrupt mode (1 INT#x; 2 MSI)");
+static int dropless_fc;
+module_param(dropless_fc, int, 0);
+MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
+
static int poll;
module_param(poll, int, 0);
MODULE_PARM_DESC(poll, " Use polling (for debug)");
@@ -123,12 +138,9 @@
static const struct pci_device_id bnx2x_pci_tbl[] = {
- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_57710,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM57710 },
- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_57711,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM57711 },
- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_57711E,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM57711E },
+ { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
+ { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
+ { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711E), BCM57711E },
{ 0 }
};
@@ -141,7 +153,7 @@
/* used only at init
* locking is done by mcp
*/
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
+void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
{
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
@@ -188,7 +200,7 @@
void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
u32 len32)
{
- struct dmae_command *dmae = &bp->init_dmae;
+ struct dmae_command dmae;
u32 *wb_comp = bnx2x_sp(bp, wb_comp);
int cnt = 200;
@@ -201,43 +213,43 @@
return;
}
- mutex_lock(&bp->dmae_mutex);
+ memset(&dmae, 0, sizeof(struct dmae_command));
- memset(dmae, 0, sizeof(struct dmae_command));
-
- dmae->opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
- DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
- DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
+ dmae.opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
+ DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
+ DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
- DMAE_CMD_ENDIANITY_B_DW_SWAP |
+ DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
- DMAE_CMD_ENDIANITY_DW_SWAP |
+ DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
- (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
- (BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
- dmae->src_addr_lo = U64_LO(dma_addr);
- dmae->src_addr_hi = U64_HI(dma_addr);
- dmae->dst_addr_lo = dst_addr >> 2;
- dmae->dst_addr_hi = 0;
- dmae->len = len32;
- dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
- dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
- dmae->comp_val = DMAE_COMP_VAL;
+ (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
+ (BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
+ dmae.src_addr_lo = U64_LO(dma_addr);
+ dmae.src_addr_hi = U64_HI(dma_addr);
+ dmae.dst_addr_lo = dst_addr >> 2;
+ dmae.dst_addr_hi = 0;
+ dmae.len = len32;
+ dmae.comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
+ dmae.comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
+ dmae.comp_val = DMAE_COMP_VAL;
DP(BNX2X_MSG_OFF, "DMAE: opcode 0x%08x\n"
DP_LEVEL "src_addr [%x:%08x] len [%d *4] "
"dst_addr [%x:%08x (%08x)]\n"
DP_LEVEL "comp_addr [%x:%08x] comp_val 0x%08x\n",
- dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
- dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, dst_addr,
- dmae->comp_addr_hi, dmae->comp_addr_lo, dmae->comp_val);
+ dmae.opcode, dmae.src_addr_hi, dmae.src_addr_lo,
+ dmae.len, dmae.dst_addr_hi, dmae.dst_addr_lo, dst_addr,
+ dmae.comp_addr_hi, dmae.comp_addr_lo, dmae.comp_val);
DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
bp->slowpath->wb_data[2], bp->slowpath->wb_data[3]);
+ mutex_lock(&bp->dmae_mutex);
+
*wb_comp = 0;
- bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
+ bnx2x_post_dmae(bp, &dmae, INIT_DMAE_C(bp));
udelay(5);
@@ -261,7 +273,7 @@
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
{
- struct dmae_command *dmae = &bp->init_dmae;
+ struct dmae_command dmae;
u32 *wb_comp = bnx2x_sp(bp, wb_comp);
int cnt = 200;
@@ -276,41 +288,41 @@
return;
}
- mutex_lock(&bp->dmae_mutex);
+ memset(&dmae, 0, sizeof(struct dmae_command));
- memset(bnx2x_sp(bp, wb_data[0]), 0, sizeof(u32) * 4);
- memset(dmae, 0, sizeof(struct dmae_command));
-
- dmae->opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
- DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
- DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
+ dmae.opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
+ DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
+ DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
#ifdef __BIG_ENDIAN
- DMAE_CMD_ENDIANITY_B_DW_SWAP |
+ DMAE_CMD_ENDIANITY_B_DW_SWAP |
#else
- DMAE_CMD_ENDIANITY_DW_SWAP |
+ DMAE_CMD_ENDIANITY_DW_SWAP |
#endif
- (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
- (BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
- dmae->src_addr_lo = src_addr >> 2;
- dmae->src_addr_hi = 0;
- dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
- dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
- dmae->len = len32;
- dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
- dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
- dmae->comp_val = DMAE_COMP_VAL;
+ (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
+ (BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
+ dmae.src_addr_lo = src_addr >> 2;
+ dmae.src_addr_hi = 0;
+ dmae.dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_data));
+ dmae.dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_data));
+ dmae.len = len32;
+ dmae.comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, wb_comp));
+ dmae.comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
+ dmae.comp_val = DMAE_COMP_VAL;
DP(BNX2X_MSG_OFF, "DMAE: opcode 0x%08x\n"
DP_LEVEL "src_addr [%x:%08x] len [%d *4] "
"dst_addr [%x:%08x (%08x)]\n"
DP_LEVEL "comp_addr [%x:%08x] comp_val 0x%08x\n",
- dmae->opcode, dmae->src_addr_hi, dmae->src_addr_lo,
- dmae->len, dmae->dst_addr_hi, dmae->dst_addr_lo, src_addr,
- dmae->comp_addr_hi, dmae->comp_addr_lo, dmae->comp_val);
+ dmae.opcode, dmae.src_addr_hi, dmae.src_addr_lo,
+ dmae.len, dmae.dst_addr_hi, dmae.dst_addr_lo, src_addr,
+ dmae.comp_addr_hi, dmae.comp_addr_lo, dmae.comp_val);
+ mutex_lock(&bp->dmae_mutex);
+
+ memset(bnx2x_sp(bp, wb_data[0]), 0, sizeof(u32) * 4);
*wb_comp = 0;
- bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
+ bnx2x_post_dmae(bp, &dmae, INIT_DMAE_C(bp));
udelay(5);
@@ -334,6 +346,21 @@
mutex_unlock(&bp->dmae_mutex);
}
+void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
+ u32 addr, u32 len)
+{
+ int offset = 0;
+
+ while (len > DMAE_LEN32_WR_MAX) {
+ bnx2x_write_dmae(bp, phys_addr + offset,
+ addr + offset, DMAE_LEN32_WR_MAX);
+ offset += DMAE_LEN32_WR_MAX * 4;
+ len -= DMAE_LEN32_WR_MAX;
+ }
+
+ bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
+}
+
/* used only for slowpath so not inlined */
static void bnx2x_wb_wr(struct bnx2x *bp, int reg, u32 val_hi, u32 val_lo)
{
@@ -542,16 +569,15 @@
/* Tx */
for_each_tx_queue(bp, i) {
struct bnx2x_fastpath *fp = &bp->fp[i];
- struct eth_tx_db_data *hw_prods = fp->hw_tx_prods;
BNX2X_ERR("fp%d: tx_pkt_prod(%x) tx_pkt_cons(%x)"
" tx_bd_prod(%x) tx_bd_cons(%x) *tx_cons_sb(%x)\n",
i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
BNX2X_ERR(" fp_c_idx(%x) *sb_c_idx(%x)"
- " bd data(%x,%x)\n", le16_to_cpu(fp->fp_c_idx),
+ " tx_db_prod(%x)\n", le16_to_cpu(fp->fp_c_idx),
fp->status_blk->c_status_block.status_block_index,
- hw_prods->packets_prod, hw_prods->bds_prod);
+ fp->tx_db.data.prod);
}
/* Rings */
@@ -653,6 +679,11 @@
val, port, addr, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
REG_WR(bp, addr, val);
+ /*
+ * Ensure that HC_CONFIG is written before leading/trailing edge config
+ */
+ mmiowb();
+ barrier();
if (CHIP_IS_E1H(bp)) {
/* init leading/trailing edge */
@@ -667,6 +698,9 @@
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
}
+
+ /* Make sure that interrupts are indeed enabled from here on */
+ mmiowb();
}
static void bnx2x_int_disable(struct bnx2x *bp)
@@ -689,7 +723,6 @@
REG_WR(bp, addr, val);
if (REG_RD(bp, addr) != val)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
-
}
static void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
@@ -699,6 +732,8 @@
/* disable interrupt handling */
atomic_inc(&bp->intr_sem);
+ smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
+
if (disable_hw)
/* prevent the HW from sending interrupts */
bnx2x_int_disable(bp);
@@ -740,6 +775,10 @@
DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
(*(u32 *)&igu_ack), hc_addr);
REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
+
+ /* Make sure that ACK is written */
+ mmiowb();
+ barrier();
}
static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -776,16 +815,6 @@
* fast path service functions
*/
-static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
-{
- u16 tx_cons_sb;
-
- /* Tell compiler that status block fields can change */
- barrier();
- tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
- return (fp->tx_pkt_cons != tx_cons_sb);
-}
-
static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
{
/* Tell compiler that consumer and producer can change */
@@ -800,7 +829,8 @@
u16 idx)
{
struct sw_tx_bd *tx_buf = &fp->tx_buf_ring[idx];
- struct eth_tx_bd *tx_bd;
+ struct eth_tx_start_bd *tx_start_bd;
+ struct eth_tx_bd *tx_data_bd;
struct sk_buff *skb = tx_buf->skb;
u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
int nbd;
@@ -810,51 +840,46 @@
/* unmap first bd */
DP(BNX2X_MSG_OFF, "free bd_idx %d\n", bd_idx);
- tx_bd = &fp->tx_desc_ring[bd_idx];
- pci_unmap_single(bp->pdev, BD_UNMAP_ADDR(tx_bd),
- BD_UNMAP_LEN(tx_bd), PCI_DMA_TODEVICE);
+ tx_start_bd = &fp->tx_desc_ring[bd_idx].start_bd;
+ pci_unmap_single(bp->pdev, BD_UNMAP_ADDR(tx_start_bd),
+ BD_UNMAP_LEN(tx_start_bd), PCI_DMA_TODEVICE);
- nbd = le16_to_cpu(tx_bd->nbd) - 1;
- new_cons = nbd + tx_buf->first_bd;
+ nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
#ifdef BNX2X_STOP_ON_ERROR
- if (nbd > (MAX_SKB_FRAGS + 2)) {
+ if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) {
BNX2X_ERR("BAD nbd!\n");
bnx2x_panic();
}
#endif
+ new_cons = nbd + tx_buf->first_bd;
- /* Skip a parse bd and the TSO split header bd
- since they have no mapping */
- if (nbd)
+ /* Get the next bd */
+ bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
+
+ /* Skip a parse bd... */
+ --nbd;
+ bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
+
+ /* ...and the TSO split header bd since they have no mapping */
+ if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
+ --nbd;
bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
-
- if (tx_bd->bd_flags.as_bitfield & (ETH_TX_BD_FLAGS_IP_CSUM |
- ETH_TX_BD_FLAGS_TCP_CSUM |
- ETH_TX_BD_FLAGS_SW_LSO)) {
- if (--nbd)
- bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
- tx_bd = &fp->tx_desc_ring[bd_idx];
- /* is this a TSO split header bd? */
- if (tx_bd->bd_flags.as_bitfield & ETH_TX_BD_FLAGS_SW_LSO) {
- if (--nbd)
- bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
- }
}
/* now free frags */
while (nbd > 0) {
DP(BNX2X_MSG_OFF, "free frag bd_idx %d\n", bd_idx);
- tx_bd = &fp->tx_desc_ring[bd_idx];
- pci_unmap_page(bp->pdev, BD_UNMAP_ADDR(tx_bd),
- BD_UNMAP_LEN(tx_bd), PCI_DMA_TODEVICE);
+ tx_data_bd = &fp->tx_desc_ring[bd_idx].reg_bd;
+ pci_unmap_page(bp->pdev, BD_UNMAP_ADDR(tx_data_bd),
+ BD_UNMAP_LEN(tx_data_bd), PCI_DMA_TODEVICE);
if (--nbd)
bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
}
/* release skb */
WARN_ON(!skb);
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
tx_buf->first_bd = 0;
tx_buf->skb = NULL;
@@ -896,7 +921,7 @@
return;
#endif
- txq = netdev_get_tx_queue(bp->dev, fp->index);
+ txq = netdev_get_tx_queue(bp->dev, fp->index - bp->num_rx_queues);
hw_cons = le16_to_cpu(*fp->tx_cons_sb);
sw_cons = fp->tx_pkt_cons;
@@ -926,8 +951,6 @@
/* TBD need a thresh? */
if (unlikely(netif_tx_queue_stopped(txq))) {
- __netif_tx_lock(txq, smp_processor_id());
-
/* Need to make the tx_bd_cons update visible to start_xmit()
* before checking for netif_tx_queue_stopped(). Without the
* memory barrier, there is a small possibility that
@@ -940,8 +963,6 @@
(bp->state == BNX2X_STATE_OPEN) &&
(bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
netif_tx_wake_queue(txq);
-
- __netif_tx_unlock(txq);
}
}
@@ -1009,6 +1030,7 @@
break;
case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
+ case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DISABLED):
DP(NETIF_MSG_IFDOWN, "got (un)set mac ramrod\n");
break;
@@ -1491,6 +1513,13 @@
bd_prod = RX_BD(bd_prod);
bd_cons = RX_BD(bd_cons);
+ /* Prefetch the page containing the BD descriptor
+ at producer's index. It will be needed when new skb is
+ allocated */
+ prefetch((void *)(PAGE_ALIGN((unsigned long)
+ (&fp->rx_desc_ring[bd_prod])) -
+ PAGE_SIZE + 1));
+
cqe = &fp->rx_comp_ring[comp_ring_cons];
cqe_fp_flags = cqe->fast_path_cqe.type_error_flags;
@@ -1599,7 +1628,8 @@
skb = new_skb;
- } else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) {
+ } else
+ if (likely(bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0)) {
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
bp->rx_buf_size,
@@ -1629,6 +1659,7 @@
}
skb_record_rx_queue(skb, fp->index);
+
#ifdef BCM_VLAN
if ((bp->vlgrp != NULL) && (bp->flags & HW_VLAN_RX_FLAG) &&
(le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
@@ -1674,7 +1705,6 @@
{
struct bnx2x_fastpath *fp = fp_cookie;
struct bnx2x *bp = fp->bp;
- int index = fp->index;
/* Return here if interrupt is disabled */
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
@@ -1683,20 +1713,34 @@
}
DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n",
- index, fp->sb_id);
+ fp->index, fp->sb_id);
bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
return IRQ_HANDLED;
#endif
+ /* Handle Rx or Tx according to MSI-X vector */
+ if (fp->is_rx_queue) {
+ prefetch(fp->rx_cons_sb);
+ prefetch(&fp->status_blk->u_status_block.status_block_index);
- prefetch(fp->rx_cons_sb);
- prefetch(fp->tx_cons_sb);
- prefetch(&fp->status_blk->c_status_block.status_block_index);
- prefetch(&fp->status_blk->u_status_block.status_block_index);
+ napi_schedule(&bnx2x_fp(bp, fp->index, napi));
- napi_schedule(&bnx2x_fp(bp, index, napi));
+ } else {
+ prefetch(fp->tx_cons_sb);
+ prefetch(&fp->status_blk->c_status_block.status_block_index);
+
+ bnx2x_update_fpsb_idx(fp);
+ rmb();
+ bnx2x_tx_int(fp);
+
+ /* Re-enable interrupts */
+ bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
+ le16_to_cpu(fp->fp_u_idx), IGU_INT_NOP, 1);
+ bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
+ le16_to_cpu(fp->fp_c_idx), IGU_INT_ENABLE, 1);
+ }
return IRQ_HANDLED;
}
@@ -1706,6 +1750,7 @@
struct bnx2x *bp = netdev_priv(dev_instance);
u16 status = bnx2x_ack_int(bp);
u16 mask;
+ int i;
/* Return here if interrupt is shared and it's not for us */
if (unlikely(status == 0)) {
@@ -1725,18 +1770,38 @@
return IRQ_HANDLED;
#endif
- mask = 0x2 << bp->fp[0].sb_id;
- if (status & mask) {
- struct bnx2x_fastpath *fp = &bp->fp[0];
+ for (i = 0; i < BNX2X_NUM_QUEUES(bp); i++) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
- prefetch(fp->rx_cons_sb);
- prefetch(fp->tx_cons_sb);
- prefetch(&fp->status_blk->c_status_block.status_block_index);
- prefetch(&fp->status_blk->u_status_block.status_block_index);
+ mask = 0x2 << fp->sb_id;
+ if (status & mask) {
+ /* Handle Rx or Tx according to SB id */
+ if (fp->is_rx_queue) {
+ prefetch(fp->rx_cons_sb);
+ prefetch(&fp->status_blk->u_status_block.
+ status_block_index);
- napi_schedule(&bnx2x_fp(bp, 0, napi));
+ napi_schedule(&bnx2x_fp(bp, fp->index, napi));
- status &= ~mask;
+ } else {
+ prefetch(fp->tx_cons_sb);
+ prefetch(&fp->status_blk->c_status_block.
+ status_block_index);
+
+ bnx2x_update_fpsb_idx(fp);
+ rmb();
+ bnx2x_tx_int(fp);
+
+ /* Re-enable interrupts */
+ bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
+ le16_to_cpu(fp->fp_u_idx),
+ IGU_INT_NOP, 1);
+ bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
+ le16_to_cpu(fp->fp_c_idx),
+ IGU_INT_ENABLE, 1);
+ }
+ status &= ~mask;
+ }
}
@@ -2063,6 +2128,12 @@
static void bnx2x_link_report(struct bnx2x *bp)
{
+ if (bp->state == BNX2X_STATE_DISABLED) {
+ netif_carrier_off(bp->dev);
+ printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ return;
+ }
+
if (bp->link_vars.link_up) {
if (bp->state == BNX2X_STATE_OPEN)
netif_carrier_on(bp->dev);
@@ -2102,9 +2173,7 @@
/* Initialize link parameters structure variables */
/* It is recommended to turn off RX FC for jumbo frames
for better performance */
- if (IS_E1HMF(bp))
- bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
- else if (bp->dev->mtu > 5000)
+ if (bp->dev->mtu > 5000)
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
else
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
@@ -2199,6 +2268,46 @@
bp->cmng.fair_vars.fairness_timeout = fair_periodic_timeout_usec / 4;
}
+/* Calculates the sum of vn_min_rates.
+ It's needed for further normalizing of the min_rates.
+ Returns:
+ sum of vn_min_rates.
+ or
+ 0 - if all the min_rates are 0.
+ In the later case fainess algorithm should be deactivated.
+ If not all min_rates are zero then those that are zeroes will be set to 1.
+ */
+static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
+{
+ int all_zero = 1;
+ int port = BP_PORT(bp);
+ int vn;
+
+ bp->vn_weight_sum = 0;
+ for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ int func = 2*vn + port;
+ u32 vn_cfg = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
+ u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
+ FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
+
+ /* Skip hidden vns */
+ if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
+ continue;
+
+ /* If min rate is zero - set it to 1 */
+ if (!vn_min_rate)
+ vn_min_rate = DEF_MIN_RATE;
+ else
+ all_zero = 0;
+
+ bp->vn_weight_sum += vn_min_rate;
+ }
+
+ /* ... only if all min rates are zeros - disable fairness */
+ if (all_zero)
+ bp->vn_weight_sum = 0;
+}
+
static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func)
{
struct rate_shaping_vars_per_vn m_rs_vn;
@@ -2276,7 +2385,7 @@
if (bp->link_vars.link_up) {
/* dropless flow control */
- if (CHIP_IS_E1H(bp)) {
+ if (CHIP_IS_E1H(bp) && bp->dropless_fc) {
int port = BP_PORT(bp);
u32 pause_enabled = 0;
@@ -2284,7 +2393,7 @@
pause_enabled = 1;
REG_WR(bp, BAR_USTRORM_INTMEM +
- USTORM_PAUSE_ENABLED_OFFSET(port),
+ USTORM_ETH_PAUSE_ENABLED_OFFSET(port),
pause_enabled);
}
@@ -2309,14 +2418,12 @@
int func;
int vn;
+ /* Set the attention towards other drivers on the same port */
for (vn = VN_0; vn < E1HVN_MAX; vn++) {
if (vn == BP_E1HVN(bp))
continue;
func = ((vn << 1) | port);
-
- /* Set the attention towards other drivers
- on the same port */
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
}
@@ -2342,6 +2449,8 @@
static void bnx2x__link_status_update(struct bnx2x *bp)
{
+ int func = BP_FUNC(bp);
+
if (bp->state != BNX2X_STATE_OPEN)
return;
@@ -2352,6 +2461,9 @@
else
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+ bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
+ bnx2x_calc_vn_weight_sum(bp);
+
/* indicate link status */
bnx2x_link_report(bp);
}
@@ -2380,6 +2492,152 @@
* General service functions
*/
+/* send the MCP a request, block until there is a reply */
+u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
+{
+ int func = BP_FUNC(bp);
+ u32 seq = ++bp->fw_seq;
+ u32 rc = 0;
+ u32 cnt = 1;
+ u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
+
+ SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
+ DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
+
+ do {
+ /* let the FW do it's magic ... */
+ msleep(delay);
+
+ rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
+
+ /* Give the FW up to 2 second (200*10ms) */
+ } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+
+ DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
+ cnt*delay, rc, seq);
+
+ /* is this a reply to our command? */
+ if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK))
+ rc &= FW_MSG_CODE_MASK;
+ else {
+ /* FW BUG! */
+ BNX2X_ERR("FW failed to respond!\n");
+ bnx2x_fw_dump(bp);
+ rc = 0;
+ }
+
+ return rc;
+}
+
+static void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
+static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set);
+static void bnx2x_set_rx_mode(struct net_device *dev);
+
+static void bnx2x_e1h_disable(struct bnx2x *bp)
+{
+ int port = BP_PORT(bp);
+ int i;
+
+ bp->rx_mode = BNX2X_RX_MODE_NONE;
+ bnx2x_set_storm_rx_mode(bp);
+
+ netif_tx_disable(bp->dev);
+ bp->dev->trans_start = jiffies; /* prevent tx timeout */
+
+ REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
+ bnx2x_set_mac_addr_e1h(bp, 0);
+
+ for (i = 0; i < MC_HASH_SIZE; i++)
+ REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
+
+ netif_carrier_off(bp->dev);
+}
+
+static void bnx2x_e1h_enable(struct bnx2x *bp)
+{
+ int port = BP_PORT(bp);
+
+ REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
+
+ bnx2x_set_mac_addr_e1h(bp, 1);
+
+ /* Tx queue should be only reenabled */
+ netif_tx_wake_all_queues(bp->dev);
+
+ /* Initialize the receive filter. */
+ bnx2x_set_rx_mode(bp->dev);
+}
+
+static void bnx2x_update_min_max(struct bnx2x *bp)
+{
+ int port = BP_PORT(bp);
+ int vn, i;
+
+ /* Init rate shaping and fairness contexts */
+ bnx2x_init_port_minmax(bp);
+
+ bnx2x_calc_vn_weight_sum(bp);
+
+ for (vn = VN_0; vn < E1HVN_MAX; vn++)
+ bnx2x_init_vn_minmax(bp, 2*vn + port);
+
+ if (bp->port.pmf) {
+ int func;
+
+ /* Set the attention towards other drivers on the same port */
+ for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ if (vn == BP_E1HVN(bp))
+ continue;
+
+ func = ((vn << 1) | port);
+ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
+ (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
+ }
+
+ /* Store it to internal memory */
+ for (i = 0; i < sizeof(struct cmng_struct_per_port) / 4; i++)
+ REG_WR(bp, BAR_XSTRORM_INTMEM +
+ XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) + i*4,
+ ((u32 *)(&bp->cmng))[i]);
+ }
+}
+
+static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
+{
+ int func = BP_FUNC(bp);
+
+ DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
+ bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
+
+ if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
+
+ if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
+ DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n");
+ bp->state = BNX2X_STATE_DISABLED;
+
+ bnx2x_e1h_disable(bp);
+ } else {
+ DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
+ bp->state = BNX2X_STATE_OPEN;
+
+ bnx2x_e1h_enable(bp);
+ }
+ dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
+ }
+ if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
+
+ bnx2x_update_min_max(bp);
+ dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
+ }
+
+ /* Report results to MCP */
+ if (dcc_event)
+ bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE);
+ else
+ bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK);
+}
+
/* the slow path queue is odd since completions arrive on the fastpath ring */
static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
u32 data_hi, u32 data_lo, int common)
@@ -2430,9 +2688,14 @@
bp->spq_prod_idx++;
}
+ /* Make sure that BD data is updated before writing the producer */
+ wmb();
+
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
bp->spq_prod_idx);
+ mmiowb();
+
spin_unlock_bh(&bp->spq_lock);
return 0;
}
@@ -2599,11 +2862,28 @@
}
}
+static inline void bnx2x_fan_failure(struct bnx2x *bp)
+{
+ int port = BP_PORT(bp);
+
+ /* mark the failure */
+ bp->link_params.ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ bp->link_params.ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+ SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
+ bp->link_params.ext_phy_config);
+
+ /* log the failure */
+ printk(KERN_ERR PFX "Fan Failure on Network Controller %s has caused"
+ " the driver to shutdown the card to prevent permanent"
+ " damage. Please contact Dell Support for assistance\n",
+ bp->dev->name);
+}
+
static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
{
int port = BP_PORT(bp);
int reg_offset;
- u32 val;
+ u32 val, swap_val, swap_override;
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
@@ -2616,36 +2896,32 @@
BNX2X_ERR("SPIO5 hw attention\n");
+ /* Fan failure attention */
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- /* Fan failure attention */
-
- /* The PHY reset is controlled by GPIO 1 */
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
/* Low power mode is controlled by GPIO 2 */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
- /* mark the failure */
- bp->link_params.ext_phy_config &=
- ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
- bp->link_params.ext_phy_config |=
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
- SHMEM_WR(bp,
- dev_info.port_hw_config[port].
- external_phy_config,
- bp->link_params.ext_phy_config);
- /* log the failure */
- printk(KERN_ERR PFX "Fan Failure on Network"
- " Controller %s has caused the driver to"
- " shutdown the card to prevent permanent"
- " damage. Please contact Dell Support for"
- " assistance\n", bp->dev->name);
+ /* The PHY reset is controlled by GPIO 1 */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ /* The PHY reset is controlled by GPIO 1 */
+ /* fake the port number to cancel the swap done in
+ set_gpio() */
+ swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+ swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
+ port = (swap_val && swap_override) ^ 1;
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
break;
default:
break;
}
+ bnx2x_fan_failure(bp);
}
if (attn & (AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 |
@@ -2662,7 +2938,7 @@
REG_WR(bp, reg_offset, val);
BNX2X_ERR("FATAL HW block attention set0 0x%x\n",
- (attn & HW_INTERRUT_ASSERT_SET_0));
+ (u32)(attn & HW_INTERRUT_ASSERT_SET_0));
bnx2x_panic();
}
}
@@ -2693,7 +2969,7 @@
REG_WR(bp, reg_offset, val);
BNX2X_ERR("FATAL HW block attention set1 0x%x\n",
- (attn & HW_INTERRUT_ASSERT_SET_1));
+ (u32)(attn & HW_INTERRUT_ASSERT_SET_1));
bnx2x_panic();
}
}
@@ -2733,7 +3009,7 @@
REG_WR(bp, reg_offset, val);
BNX2X_ERR("FATAL HW block attention set2 0x%x\n",
- (attn & HW_INTERRUT_ASSERT_SET_2));
+ (u32)(attn & HW_INTERRUT_ASSERT_SET_2));
bnx2x_panic();
}
}
@@ -2748,9 +3024,12 @@
int func = BP_FUNC(bp);
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+ val = SHMEM_RD(bp, func_mb[func].drv_status);
+ if (val & DRV_STATUS_DCC_EVENT_MASK)
+ bnx2x_dcc_event(bp,
+ (val & DRV_STATUS_DCC_EVENT_MASK));
bnx2x__link_status_update(bp);
- if (SHMEM_RD(bp, func_mb[func].drv_status) &
- DRV_STATUS_PMF)
+ if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
bnx2x_pmf_update(bp);
} else if (attn & BNX2X_MC_ASSERT_BITS) {
@@ -3109,53 +3388,6 @@
}
}
-static void bnx2x_stats_init(struct bnx2x *bp)
-{
- int port = BP_PORT(bp);
- int i;
-
- bp->stats_pending = 0;
- bp->executer_idx = 0;
- bp->stats_counter = 0;
-
- /* port stats */
- if (!BP_NOMCP(bp))
- bp->port.port_stx = SHMEM_RD(bp, port_mb[port].port_stx);
- else
- bp->port.port_stx = 0;
- DP(BNX2X_MSG_STATS, "port_stx 0x%x\n", bp->port.port_stx);
-
- memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats));
- bp->port.old_nig_stats.brb_discard =
- REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38);
- bp->port.old_nig_stats.brb_truncate =
- REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38);
- REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50,
- &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2);
- REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50,
- &(bp->port.old_nig_stats.egress_mac_pkt1_lo), 2);
-
- /* function stats */
- for_each_queue(bp, i) {
- struct bnx2x_fastpath *fp = &bp->fp[i];
-
- memset(&fp->old_tclient, 0,
- sizeof(struct tstorm_per_client_stats));
- memset(&fp->old_uclient, 0,
- sizeof(struct ustorm_per_client_stats));
- memset(&fp->old_xclient, 0,
- sizeof(struct xstorm_per_client_stats));
- memset(&fp->eth_q_stats, 0, sizeof(struct bnx2x_eth_q_stats));
- }
-
- memset(&bp->dev->stats, 0, sizeof(struct net_device_stats));
- memset(&bp->eth_stats, 0, sizeof(struct bnx2x_eth_stats));
-
- bp->stats_state = STATS_STATE_DISABLED;
- if (IS_E1HMF(bp) && bp->port.pmf && bp->port.port_stx)
- bnx2x_stats_handle(bp, STATS_EVENT_PMF);
-}
-
static void bnx2x_hw_stats_post(struct bnx2x *bp)
{
struct dmae_command *dmae = &bp->stats_dmae;
@@ -3716,7 +3948,8 @@
struct bnx2x_eth_stats *estats = &bp->eth_stats;
int i;
- memset(&(fstats->total_bytes_received_hi), 0,
+ memcpy(&(fstats->total_bytes_received_hi),
+ &(bnx2x_sp(bp, func_stats_base)->total_bytes_received_hi),
sizeof(struct host_func_stats) - 2*sizeof(u32));
estats->error_bytes_received_hi = 0;
estats->error_bytes_received_lo = 0;
@@ -3725,7 +3958,7 @@
estats->no_buff_discard_hi = 0;
estats->no_buff_discard_lo = 0;
- for_each_queue(bp, i) {
+ for_each_rx_queue(bp, i) {
struct bnx2x_fastpath *fp = &bp->fp[i];
int cl_id = fp->cl_id;
struct tstorm_per_client_stats *tclient =
@@ -3764,11 +3997,24 @@
}
qstats->total_bytes_received_hi =
- qstats->valid_bytes_received_hi =
- le32_to_cpu(tclient->total_rcv_bytes.hi);
+ le32_to_cpu(tclient->rcv_broadcast_bytes.hi);
qstats->total_bytes_received_lo =
+ le32_to_cpu(tclient->rcv_broadcast_bytes.lo);
+
+ ADD_64(qstats->total_bytes_received_hi,
+ le32_to_cpu(tclient->rcv_multicast_bytes.hi),
+ qstats->total_bytes_received_lo,
+ le32_to_cpu(tclient->rcv_multicast_bytes.lo));
+
+ ADD_64(qstats->total_bytes_received_hi,
+ le32_to_cpu(tclient->rcv_unicast_bytes.hi),
+ qstats->total_bytes_received_lo,
+ le32_to_cpu(tclient->rcv_unicast_bytes.lo));
+
+ qstats->valid_bytes_received_hi =
+ qstats->total_bytes_received_hi;
qstats->valid_bytes_received_lo =
- le32_to_cpu(tclient->total_rcv_bytes.lo);
+ qstats->total_bytes_received_lo;
qstats->error_bytes_received_hi =
le32_to_cpu(tclient->rcv_error_bytes.hi);
@@ -3801,9 +4047,19 @@
UPDATE_EXTEND_USTAT(bcast_no_buff_pkts, no_buff_discard);
qstats->total_bytes_transmitted_hi =
- le32_to_cpu(xclient->total_sent_bytes.hi);
+ le32_to_cpu(xclient->unicast_bytes_sent.hi);
qstats->total_bytes_transmitted_lo =
- le32_to_cpu(xclient->total_sent_bytes.lo);
+ le32_to_cpu(xclient->unicast_bytes_sent.lo);
+
+ ADD_64(qstats->total_bytes_transmitted_hi,
+ le32_to_cpu(xclient->multicast_bytes_sent.hi),
+ qstats->total_bytes_transmitted_lo,
+ le32_to_cpu(xclient->multicast_bytes_sent.lo));
+
+ ADD_64(qstats->total_bytes_transmitted_hi,
+ le32_to_cpu(xclient->broadcast_bytes_sent.hi),
+ qstats->total_bytes_transmitted_lo,
+ le32_to_cpu(xclient->broadcast_bytes_sent.lo));
UPDATE_EXTEND_XSTAT(unicast_pkts_sent,
total_unicast_packets_transmitted);
@@ -3919,7 +4175,7 @@
nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi);
nstats->rx_dropped = estats->mac_discard;
- for_each_queue(bp, i)
+ for_each_rx_queue(bp, i)
nstats->rx_dropped +=
le32_to_cpu(bp->fp[i].old_tclient.checksum_discard);
@@ -3973,7 +4229,7 @@
estats->rx_err_discard_pkt = 0;
estats->rx_skb_alloc_failed = 0;
estats->hw_csum_err = 0;
- for_each_queue(bp, i) {
+ for_each_rx_queue(bp, i) {
struct bnx2x_eth_q_stats *qstats = &bp->fp[i].eth_q_stats;
estats->driver_xoff += qstats->driver_xoff;
@@ -4003,6 +4259,8 @@
bnx2x_drv_stats_update(bp);
if (bp->msglevel & NETIF_MSG_TIMER) {
+ struct bnx2x_fastpath *fp0_rx = bp->fp;
+ struct bnx2x_fastpath *fp0_tx = &(bp->fp[bp->num_rx_queues]);
struct tstorm_per_client_stats *old_tclient =
&bp->fp->old_tclient;
struct bnx2x_eth_q_stats *qstats = &bp->fp->eth_q_stats;
@@ -4013,13 +4271,13 @@
printk(KERN_DEBUG "%s:\n", bp->dev->name);
printk(KERN_DEBUG " tx avail (%4x) tx hc idx (%x)"
" tx pkt (%lx)\n",
- bnx2x_tx_avail(bp->fp),
- le16_to_cpu(*bp->fp->tx_cons_sb), nstats->tx_packets);
+ bnx2x_tx_avail(fp0_tx),
+ le16_to_cpu(*fp0_tx->tx_cons_sb), nstats->tx_packets);
printk(KERN_DEBUG " rx usage (%4x) rx hc idx (%x)"
" rx pkt (%lx)\n",
- (u16)(le16_to_cpu(*bp->fp->rx_cons_sb) -
- bp->fp->rx_comp_cons),
- le16_to_cpu(*bp->fp->rx_cons_sb), nstats->rx_packets);
+ (u16)(le16_to_cpu(*fp0_rx->rx_cons_sb) -
+ fp0_rx->rx_comp_cons),
+ le16_to_cpu(*fp0_rx->rx_cons_sb), nstats->rx_packets);
printk(KERN_DEBUG " %s (Xoff events %u) brb drops %u "
"brb truncate %u\n",
(netif_queue_stopped(bp->dev) ? "Xoff" : "Xon"),
@@ -4165,11 +4423,181 @@
bnx2x_stats_stm[state][event].action(bp);
bp->stats_state = bnx2x_stats_stm[state][event].next_state;
+ /* Make sure the state has been "changed" */
+ smp_wmb();
+
if ((event != STATS_EVENT_UPDATE) || (bp->msglevel & NETIF_MSG_TIMER))
DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
state, event, bp->stats_state);
}
+static void bnx2x_port_stats_base_init(struct bnx2x *bp)
+{
+ struct dmae_command *dmae;
+ u32 *stats_comp = bnx2x_sp(bp, stats_comp);
+
+ /* sanity */
+ if (!bp->port.pmf || !bp->port.port_stx) {
+ BNX2X_ERR("BUG!\n");
+ return;
+ }
+
+ bp->executer_idx = 0;
+
+ dmae = bnx2x_sp(bp, dmae[bp->executer_idx++]);
+ dmae->opcode = (DMAE_CMD_SRC_PCI | DMAE_CMD_DST_GRC |
+ DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
+ DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
+#ifdef __BIG_ENDIAN
+ DMAE_CMD_ENDIANITY_B_DW_SWAP |
+#else
+ DMAE_CMD_ENDIANITY_DW_SWAP |
+#endif
+ (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
+ (BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
+ dmae->src_addr_lo = U64_LO(bnx2x_sp_mapping(bp, port_stats));
+ dmae->src_addr_hi = U64_HI(bnx2x_sp_mapping(bp, port_stats));
+ dmae->dst_addr_lo = bp->port.port_stx >> 2;
+ dmae->dst_addr_hi = 0;
+ dmae->len = sizeof(struct host_port_stats) >> 2;
+ dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp));
+ dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp));
+ dmae->comp_val = DMAE_COMP_VAL;
+
+ *stats_comp = 0;
+ bnx2x_hw_stats_post(bp);
+ bnx2x_stats_comp(bp);
+}
+
+static void bnx2x_func_stats_base_init(struct bnx2x *bp)
+{
+ int vn, vn_max = IS_E1HMF(bp) ? E1HVN_MAX : E1VN_MAX;
+ int port = BP_PORT(bp);
+ int func;
+ u32 func_stx;
+
+ /* sanity */
+ if (!bp->port.pmf || !bp->func_stx) {
+ BNX2X_ERR("BUG!\n");
+ return;
+ }
+
+ /* save our func_stx */
+ func_stx = bp->func_stx;
+
+ for (vn = VN_0; vn < vn_max; vn++) {
+ func = 2*vn + port;
+
+ bp->func_stx = SHMEM_RD(bp, func_mb[func].fw_mb_param);
+ bnx2x_func_stats_init(bp);
+ bnx2x_hw_stats_post(bp);
+ bnx2x_stats_comp(bp);
+ }
+
+ /* restore our func_stx */
+ bp->func_stx = func_stx;
+}
+
+static void bnx2x_func_stats_base_update(struct bnx2x *bp)
+{
+ struct dmae_command *dmae = &bp->stats_dmae;
+ u32 *stats_comp = bnx2x_sp(bp, stats_comp);
+
+ /* sanity */
+ if (!bp->func_stx) {
+ BNX2X_ERR("BUG!\n");
+ return;
+ }
+
+ bp->executer_idx = 0;
+ memset(dmae, 0, sizeof(struct dmae_command));
+
+ dmae->opcode = (DMAE_CMD_SRC_GRC | DMAE_CMD_DST_PCI |
+ DMAE_CMD_C_DST_PCI | DMAE_CMD_C_ENABLE |
+ DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET |
+#ifdef __BIG_ENDIAN
+ DMAE_CMD_ENDIANITY_B_DW_SWAP |
+#else
+ DMAE_CMD_ENDIANITY_DW_SWAP |
+#endif
+ (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0) |
+ (BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT));
+ dmae->src_addr_lo = bp->func_stx >> 2;
+ dmae->src_addr_hi = 0;
+ dmae->dst_addr_lo = U64_LO(bnx2x_sp_mapping(bp, func_stats_base));
+ dmae->dst_addr_hi = U64_HI(bnx2x_sp_mapping(bp, func_stats_base));
+ dmae->len = sizeof(struct host_func_stats) >> 2;
+ dmae->comp_addr_lo = U64_LO(bnx2x_sp_mapping(bp, stats_comp));
+ dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, stats_comp));
+ dmae->comp_val = DMAE_COMP_VAL;
+
+ *stats_comp = 0;
+ bnx2x_hw_stats_post(bp);
+ bnx2x_stats_comp(bp);
+}
+
+static void bnx2x_stats_init(struct bnx2x *bp)
+{
+ int port = BP_PORT(bp);
+ int func = BP_FUNC(bp);
+ int i;
+
+ bp->stats_pending = 0;
+ bp->executer_idx = 0;
+ bp->stats_counter = 0;
+
+ /* port and func stats for management */
+ if (!BP_NOMCP(bp)) {
+ bp->port.port_stx = SHMEM_RD(bp, port_mb[port].port_stx);
+ bp->func_stx = SHMEM_RD(bp, func_mb[func].fw_mb_param);
+
+ } else {
+ bp->port.port_stx = 0;
+ bp->func_stx = 0;
+ }
+ DP(BNX2X_MSG_STATS, "port_stx 0x%x func_stx 0x%x\n",
+ bp->port.port_stx, bp->func_stx);
+
+ /* port stats */
+ memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats));
+ bp->port.old_nig_stats.brb_discard =
+ REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38);
+ bp->port.old_nig_stats.brb_truncate =
+ REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38);
+ REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50,
+ &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2);
+ REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50,
+ &(bp->port.old_nig_stats.egress_mac_pkt1_lo), 2);
+
+ /* function stats */
+ for_each_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+
+ memset(&fp->old_tclient, 0,
+ sizeof(struct tstorm_per_client_stats));
+ memset(&fp->old_uclient, 0,
+ sizeof(struct ustorm_per_client_stats));
+ memset(&fp->old_xclient, 0,
+ sizeof(struct xstorm_per_client_stats));
+ memset(&fp->eth_q_stats, 0, sizeof(struct bnx2x_eth_q_stats));
+ }
+
+ memset(&bp->dev->stats, 0, sizeof(struct net_device_stats));
+ memset(&bp->eth_stats, 0, sizeof(struct bnx2x_eth_stats));
+
+ bp->stats_state = STATS_STATE_DISABLED;
+
+ if (bp->port.pmf) {
+ if (bp->port.port_stx)
+ bnx2x_port_stats_base_init(bp);
+
+ if (bp->func_stx)
+ bnx2x_func_stats_base_init(bp);
+
+ } else if (bp->func_stx)
+ bnx2x_func_stats_base_update(bp);
+}
+
static void bnx2x_timer(unsigned long data)
{
struct bnx2x *bp = (struct bnx2x *) data;
@@ -4232,12 +4660,13 @@
{
int port = BP_PORT(bp);
- bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
- USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
- sizeof(struct ustorm_status_block)/4);
- bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
- CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
- sizeof(struct cstorm_status_block)/4);
+ /* "CSTORM" */
+ bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
+ CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, sb_id), 0,
+ CSTORM_SB_STATUS_BLOCK_U_SIZE / 4);
+ bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
+ CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id), 0,
+ CSTORM_SB_STATUS_BLOCK_C_SIZE / 4);
}
static void bnx2x_init_sb(struct bnx2x *bp, struct host_status_block *sb,
@@ -4253,17 +4682,17 @@
u_status_block);
sb->u_status_block.status_block_id = sb_id;
- REG_WR(bp, BAR_USTRORM_INTMEM +
- USTORM_SB_HOST_SB_ADDR_OFFSET(port, sb_id), U64_LO(section));
- REG_WR(bp, BAR_USTRORM_INTMEM +
- ((USTORM_SB_HOST_SB_ADDR_OFFSET(port, sb_id)) + 4),
+ REG_WR(bp, BAR_CSTRORM_INTMEM +
+ CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, sb_id), U64_LO(section));
+ REG_WR(bp, BAR_CSTRORM_INTMEM +
+ ((CSTORM_SB_HOST_SB_ADDR_U_OFFSET(port, sb_id)) + 4),
U64_HI(section));
- REG_WR8(bp, BAR_USTRORM_INTMEM + FP_USB_FUNC_OFF +
- USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), func);
+ REG_WR8(bp, BAR_CSTRORM_INTMEM + FP_USB_FUNC_OFF +
+ CSTORM_SB_HOST_STATUS_BLOCK_U_OFFSET(port, sb_id), func);
for (index = 0; index < HC_USTORM_SB_NUM_INDICES; index++)
- REG_WR16(bp, BAR_USTRORM_INTMEM +
- USTORM_SB_HC_DISABLE_OFFSET(port, sb_id, index), 1);
+ REG_WR16(bp, BAR_CSTRORM_INTMEM +
+ CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id, index), 1);
/* CSTORM */
section = ((u64)mapping) + offsetof(struct host_status_block,
@@ -4271,16 +4700,16 @@
sb->c_status_block.status_block_id = sb_id;
REG_WR(bp, BAR_CSTRORM_INTMEM +
- CSTORM_SB_HOST_SB_ADDR_OFFSET(port, sb_id), U64_LO(section));
+ CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, sb_id), U64_LO(section));
REG_WR(bp, BAR_CSTRORM_INTMEM +
- ((CSTORM_SB_HOST_SB_ADDR_OFFSET(port, sb_id)) + 4),
+ ((CSTORM_SB_HOST_SB_ADDR_C_OFFSET(port, sb_id)) + 4),
U64_HI(section));
REG_WR8(bp, BAR_CSTRORM_INTMEM + FP_CSB_FUNC_OFF +
- CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), func);
+ CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id), func);
for (index = 0; index < HC_CSTORM_SB_NUM_INDICES; index++)
REG_WR16(bp, BAR_CSTRORM_INTMEM +
- CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id, index), 1);
+ CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id, index), 1);
bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
}
@@ -4289,16 +4718,16 @@
{
int func = BP_FUNC(bp);
- bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR +
+ bnx2x_init_fill(bp, TSEM_REG_FAST_MEMORY +
TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct tstorm_def_status_block)/4);
- bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
- USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
- sizeof(struct ustorm_def_status_block)/4);
- bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
- CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
- sizeof(struct cstorm_def_status_block)/4);
- bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR +
+ bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
+ CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(func), 0,
+ sizeof(struct cstorm_def_status_block_u)/4);
+ bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY +
+ CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(func), 0,
+ sizeof(struct cstorm_def_status_block_c)/4);
+ bnx2x_init_fill(bp, XSEM_REG_FAST_MEMORY +
XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct xstorm_def_status_block)/4);
}
@@ -4350,17 +4779,17 @@
u_def_status_block);
def_sb->u_def_status_block.status_block_id = sb_id;
- REG_WR(bp, BAR_USTRORM_INTMEM +
- USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
- REG_WR(bp, BAR_USTRORM_INTMEM +
- ((USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
+ REG_WR(bp, BAR_CSTRORM_INTMEM +
+ CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(func), U64_LO(section));
+ REG_WR(bp, BAR_CSTRORM_INTMEM +
+ ((CSTORM_DEF_SB_HOST_SB_ADDR_U_OFFSET(func)) + 4),
U64_HI(section));
- REG_WR8(bp, BAR_USTRORM_INTMEM + DEF_USB_FUNC_OFF +
- USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
+ REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_USB_FUNC_OFF +
+ CSTORM_DEF_SB_HOST_STATUS_BLOCK_U_OFFSET(func), func);
for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
- REG_WR16(bp, BAR_USTRORM_INTMEM +
- USTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
+ REG_WR16(bp, BAR_CSTRORM_INTMEM +
+ CSTORM_DEF_SB_HC_DISABLE_U_OFFSET(func, index), 1);
/* CSTORM */
section = ((u64)mapping) + offsetof(struct host_def_status_block,
@@ -4368,16 +4797,16 @@
def_sb->c_def_status_block.status_block_id = sb_id;
REG_WR(bp, BAR_CSTRORM_INTMEM +
- CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
+ CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(func), U64_LO(section));
REG_WR(bp, BAR_CSTRORM_INTMEM +
- ((CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
+ ((CSTORM_DEF_SB_HOST_SB_ADDR_C_OFFSET(func)) + 4),
U64_HI(section));
REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_CSB_FUNC_OFF +
- CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
+ CSTORM_DEF_SB_HOST_STATUS_BLOCK_C_OFFSET(func), func);
for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
REG_WR16(bp, BAR_CSTRORM_INTMEM +
- CSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
+ CSTORM_DEF_SB_HC_DISABLE_C_OFFSET(func, index), 1);
/* TSTORM */
section = ((u64)mapping) + offsetof(struct host_def_status_block,
@@ -4428,23 +4857,23 @@
int sb_id = bp->fp[i].sb_id;
/* HC_INDEX_U_ETH_RX_CQ_CONS */
- REG_WR8(bp, BAR_USTRORM_INTMEM +
- USTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
- U_SB_ETH_RX_CQ_INDEX),
+ REG_WR8(bp, BAR_CSTRORM_INTMEM +
+ CSTORM_SB_HC_TIMEOUT_U_OFFSET(port, sb_id,
+ U_SB_ETH_RX_CQ_INDEX),
bp->rx_ticks/12);
- REG_WR16(bp, BAR_USTRORM_INTMEM +
- USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
- U_SB_ETH_RX_CQ_INDEX),
+ REG_WR16(bp, BAR_CSTRORM_INTMEM +
+ CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id,
+ U_SB_ETH_RX_CQ_INDEX),
(bp->rx_ticks/12) ? 0 : 1);
/* HC_INDEX_C_ETH_TX_CQ_CONS */
REG_WR8(bp, BAR_CSTRORM_INTMEM +
- CSTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
- C_SB_ETH_TX_CQ_INDEX),
+ CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, sb_id,
+ C_SB_ETH_TX_CQ_INDEX),
bp->tx_ticks/12);
REG_WR16(bp, BAR_CSTRORM_INTMEM +
- CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
- C_SB_ETH_TX_CQ_INDEX),
+ CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id,
+ C_SB_ETH_TX_CQ_INDEX),
(bp->tx_ticks/12) ? 0 : 1);
}
}
@@ -4517,6 +4946,9 @@
fp->rx_cons_sb = BNX2X_RX_SB_INDEX;
fp->rx_bd_cons_sb = BNX2X_RX_SB_BD_INDEX;
+ /* Mark queue as Rx */
+ fp->is_rx_queue = 1;
+
/* "next page" elements initialization */
/* SGE ring */
for (i = 1; i <= NUM_RX_SGE_PAGES; i++) {
@@ -4626,17 +5058,21 @@
struct bnx2x_fastpath *fp = &bp->fp[j];
for (i = 1; i <= NUM_TX_RINGS; i++) {
- struct eth_tx_bd *tx_bd =
- &fp->tx_desc_ring[TX_DESC_CNT * i - 1];
+ struct eth_tx_next_bd *tx_next_bd =
+ &fp->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd;
- tx_bd->addr_hi =
+ tx_next_bd->addr_hi =
cpu_to_le32(U64_HI(fp->tx_desc_mapping +
BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
- tx_bd->addr_lo =
+ tx_next_bd->addr_lo =
cpu_to_le32(U64_LO(fp->tx_desc_mapping +
BCM_PAGE_SIZE*(i % NUM_TX_RINGS)));
}
+ fp->tx_db.data.header.header = DOORBELL_HDR_DB_TYPE;
+ fp->tx_db.data.zero_fill1 = 0;
+ fp->tx_db.data.prod = 0;
+
fp->tx_pkt_prod = 0;
fp->tx_pkt_cons = 0;
fp->tx_bd_prod = 0;
@@ -4644,6 +5080,10 @@
fp->tx_cons_sb = BNX2X_TX_SB_INDEX;
fp->tx_pkt = 0;
}
+
+ /* clean tx statistics */
+ for_each_rx_queue(bp, i)
+ bnx2x_fp(bp, i, tx_pkt) = 0;
}
static void bnx2x_init_sp_ring(struct bnx2x *bp)
@@ -4672,16 +5112,15 @@
{
int i;
- for_each_queue(bp, i) {
+ for_each_rx_queue(bp, i) {
struct eth_context *context = bnx2x_sp(bp, context[i].eth);
struct bnx2x_fastpath *fp = &bp->fp[i];
u8 cl_id = fp->cl_id;
- u8 sb_id = fp->sb_id;
context->ustorm_st_context.common.sb_index_numbers =
BNX2X_RX_SB_INDEX_NUM;
context->ustorm_st_context.common.clientId = cl_id;
- context->ustorm_st_context.common.status_block_id = sb_id;
+ context->ustorm_st_context.common.status_block_id = fp->sb_id;
context->ustorm_st_context.common.flags =
(USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT |
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS);
@@ -4697,8 +5136,7 @@
U64_LO(fp->rx_desc_mapping);
if (!fp->disable_tpa) {
context->ustorm_st_context.common.flags |=
- (USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA |
- USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING);
+ USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA;
context->ustorm_st_context.common.sge_buff_size =
(u16)min((u32)SGE_PAGE_SIZE*PAGES_PER_SGE,
(u32)0xffff);
@@ -4706,6 +5144,13 @@
U64_HI(fp->rx_sge_mapping);
context->ustorm_st_context.common.sge_page_base_lo =
U64_LO(fp->rx_sge_mapping);
+
+ context->ustorm_st_context.common.max_sges_for_packet =
+ SGE_PAGE_ALIGN(bp->dev->mtu) >> SGE_PAGE_SHIFT;
+ context->ustorm_st_context.common.max_sges_for_packet =
+ ((context->ustorm_st_context.common.
+ max_sges_for_packet + PAGES_PER_SGE - 1) &
+ (~(PAGES_PER_SGE - 1))) >> PAGES_PER_SGE_SHIFT;
}
context->ustorm_ag_context.cdu_usage =
@@ -4713,25 +5158,28 @@
CDU_REGION_NUMBER_UCM_AG,
ETH_CONNECTION_TYPE);
- context->xstorm_st_context.tx_bd_page_base_hi =
- U64_HI(fp->tx_desc_mapping);
- context->xstorm_st_context.tx_bd_page_base_lo =
- U64_LO(fp->tx_desc_mapping);
- context->xstorm_st_context.db_data_addr_hi =
- U64_HI(fp->tx_prods_mapping);
- context->xstorm_st_context.db_data_addr_lo =
- U64_LO(fp->tx_prods_mapping);
- context->xstorm_st_context.statistics_data = (cl_id |
- XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
- context->cstorm_st_context.sb_index_number =
- C_SB_ETH_TX_CQ_INDEX;
- context->cstorm_st_context.status_block_id = sb_id;
-
context->xstorm_ag_context.cdu_reserved =
CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, i),
CDU_REGION_NUMBER_XCM_AG,
ETH_CONNECTION_TYPE);
}
+
+ for_each_tx_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+ struct eth_context *context =
+ bnx2x_sp(bp, context[i - bp->num_rx_queues].eth);
+
+ context->cstorm_st_context.sb_index_number =
+ C_SB_ETH_TX_CQ_INDEX;
+ context->cstorm_st_context.status_block_id = fp->sb_id;
+
+ context->xstorm_st_context.tx_bd_page_base_hi =
+ U64_HI(fp->tx_desc_mapping);
+ context->xstorm_st_context.tx_bd_page_base_lo =
+ U64_LO(fp->tx_desc_mapping);
+ context->xstorm_st_context.statistics_data = (fp->cl_id |
+ XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
+ }
}
static void bnx2x_init_ind_table(struct bnx2x *bp)
@@ -4768,18 +5216,6 @@
}
#endif
- if (bp->flags & TPA_ENABLE_FLAG) {
- tstorm_client.max_sges_for_packet =
- SGE_PAGE_ALIGN(tstorm_client.mtu) >> SGE_PAGE_SHIFT;
- tstorm_client.max_sges_for_packet =
- ((tstorm_client.max_sges_for_packet +
- PAGES_PER_SGE - 1) & (~(PAGES_PER_SGE - 1))) >>
- PAGES_PER_SGE_SHIFT;
-
- tstorm_client.config_flags |=
- TSTORM_ETH_CLIENT_CONFIG_ENABLE_SGE_RING;
- }
-
for_each_queue(bp, i) {
tstorm_client.statistics_counter_id = bp->fp[i].cl_id;
@@ -4801,7 +5237,14 @@
int mode = bp->rx_mode;
int mask = (1 << BP_L_ID(bp));
int func = BP_FUNC(bp);
+ int port = BP_PORT(bp);
int i;
+ /* All but management unicast packets should pass to the host as well */
+ u32 llh_mask =
+ NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST |
+ NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST |
+ NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN |
+ NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN;
DP(NETIF_MSG_IFUP, "rx mode %d mask 0x%x\n", mode, mask);
@@ -4825,6 +5268,8 @@
tstorm_mac_filter.ucast_accept_all = mask;
tstorm_mac_filter.mcast_accept_all = mask;
tstorm_mac_filter.bcast_accept_all = mask;
+ /* pass management unicast packets as well */
+ llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST;
break;
default:
@@ -4832,6 +5277,10 @@
break;
}
+ REG_WR(bp,
+ (port ? NIG_REG_LLH1_BRB1_DRV_MASK : NIG_REG_LLH0_BRB1_DRV_MASK),
+ llh_mask);
+
for (i = 0; i < sizeof(struct tstorm_eth_mac_filter_config)/4; i++) {
REG_WR(bp, BAR_TSTRORM_INTMEM +
TSTORM_MAC_FILTER_CONFIG_OFFSET(func) + i * 4,
@@ -4849,17 +5298,6 @@
{
int i;
- if (bp->flags & TPA_ENABLE_FLAG) {
- struct tstorm_eth_tpa_exist tpa = {0};
-
- tpa.tpa_exist = 1;
-
- REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
- ((u32 *)&tpa)[0]);
- REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
- ((u32 *)&tpa)[1]);
- }
-
/* Zero this manually as its initialization is
currently missing in the initTool */
for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
@@ -4871,53 +5309,14 @@
{
int port = BP_PORT(bp);
- REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
- REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+ REG_WR(bp,
+ BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_U_OFFSET(port), BNX2X_BTR);
+ REG_WR(bp,
+ BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_C_OFFSET(port), BNX2X_BTR);
REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
}
-/* Calculates the sum of vn_min_rates.
- It's needed for further normalizing of the min_rates.
- Returns:
- sum of vn_min_rates.
- or
- 0 - if all the min_rates are 0.
- In the later case fainess algorithm should be deactivated.
- If not all min_rates are zero then those that are zeroes will be set to 1.
- */
-static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
-{
- int all_zero = 1;
- int port = BP_PORT(bp);
- int vn;
-
- bp->vn_weight_sum = 0;
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
- int func = 2*vn + port;
- u32 vn_cfg =
- SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
- u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
- FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
-
- /* Skip hidden vns */
- if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE)
- continue;
-
- /* If min rate is zero - set it to 1 */
- if (!vn_min_rate)
- vn_min_rate = DEF_MIN_RATE;
- else
- all_zero = 0;
-
- bp->vn_weight_sum += vn_min_rate;
- }
-
- /* ... only if all min rates are zeros - disable fairness */
- if (all_zero)
- bp->vn_weight_sum = 0;
-}
-
static void bnx2x_init_internal_func(struct bnx2x *bp)
{
struct tstorm_eth_function_common_config tstorm_config = {0};
@@ -4932,6 +5331,12 @@
tstorm_config.config_flags = MULTI_FLAGS(bp);
tstorm_config.rss_result_mask = MULTI_MASK;
}
+
+ /* Enable TPA if needed */
+ if (bp->flags & TPA_ENABLE_FLAG)
+ tstorm_config.config_flags |=
+ TSTORM_ETH_FUNCTION_COMMON_CONFIG_ENABLE_TPA;
+
if (IS_E1HMF(bp))
tstorm_config.config_flags |=
TSTORM_ETH_FUNCTION_COMMON_CONFIG_E1HOV_IN_CAM;
@@ -5043,6 +5448,14 @@
USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id) + 4,
U64_HI(fp->rx_comp_mapping));
+ /* Next page */
+ REG_WR(bp, BAR_USTRORM_INTMEM +
+ USTORM_CQE_PAGE_NEXT_OFFSET(port, fp->cl_id),
+ U64_LO(fp->rx_comp_mapping + BCM_PAGE_SIZE));
+ REG_WR(bp, BAR_USTRORM_INTMEM +
+ USTORM_CQE_PAGE_NEXT_OFFSET(port, fp->cl_id) + 4,
+ U64_HI(fp->rx_comp_mapping + BCM_PAGE_SIZE));
+
REG_WR16(bp, BAR_USTRORM_INTMEM +
USTORM_MAX_AGG_SIZE_OFFSET(port, fp->cl_id),
max_agg_size);
@@ -5153,6 +5566,9 @@
fp->index = i;
fp->cl_id = BP_L_ID(bp) + i;
fp->sb_id = fp->cl_id;
+ /* Suitable Rx and Tx SBs are served by the same client */
+ if (i >= bp->num_rx_queues)
+ fp->cl_id -= bp->num_rx_queues;
DP(NETIF_MSG_IFUP,
"queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d sb %d\n",
i, bp, fp->status_blk, fp->cl_id, fp->sb_id);
@@ -5185,6 +5601,11 @@
mmiowb();
bnx2x_int_enable(bp);
+
+ /* Check for SPIO5 */
+ bnx2x_attn_int_deasserted0(bp,
+ REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
+ AEU_INPUTS_ATTN_BITS_SPIO5);
}
/* end of nic init */
@@ -5510,6 +5931,78 @@
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
}
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+ u16 devctl;
+ int r_order, w_order;
+
+ pci_read_config_word(bp->pdev,
+ bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+ DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+ w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+ if (bp->mrrs == -1)
+ r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+ else {
+ DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+ r_order = bp->mrrs;
+ }
+
+ bnx2x_init_pxp_arb(bp, r_order, w_order);
+}
+
+static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
+{
+ u32 val;
+ u8 port;
+ u8 is_required = 0;
+
+ val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
+ SHARED_HW_CFG_FAN_FAILURE_MASK;
+
+ if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
+ is_required = 1;
+
+ /*
+ * The fan failure mechanism is usually related to the PHY type since
+ * the power consumption of the board is affected by the PHY. Currently,
+ * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
+ */
+ else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
+ for (port = PORT_0; port < PORT_MAX; port++) {
+ u32 phy_type =
+ SHMEM_RD(bp, dev_info.port_hw_config[port].
+ external_phy_config) &
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ is_required |=
+ ((phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) ||
+ (phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) ||
+ (phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481));
+ }
+
+ DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
+
+ if (is_required == 0)
+ return;
+
+ /* Fan failure is indicated by SPIO 5 */
+ bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+ MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+ /* set to active low mode */
+ val = REG_RD(bp, MISC_REG_SPIO_INT);
+ val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+ MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+ REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+ /* enable interrupt to signal the IGU */
+ val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+ val |= (1 << MISC_REGISTERS_SPIO_5);
+ REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+}
+
static int bnx2x_init_common(struct bnx2x *bp)
{
u32 val, i;
@@ -5626,10 +6119,10 @@
bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
- bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
- bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
- bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
- bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, TSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, USEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, CSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, XSEM_REG_FAST_MEMORY, 0, STORM_INTMEM_SIZE(bp));
bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
@@ -5662,11 +6155,6 @@
bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
val = (4 << 24) + (0 << 12) + 1024;
REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
- if (CHIP_IS_E1(bp)) {
- /* !!! fix pxp client crdit until excel update */
- REG_WR(bp, CDU_REG_CDU_DEBUG, 0x264);
- REG_WR(bp, CDU_REG_CDU_DEBUG, 0);
- }
bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
@@ -5679,19 +6167,14 @@
bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
- /* PXPCS COMMON comes here */
bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2814, 0xffffffff);
REG_WR(bp, 0x3820, 0xffffffff);
- /* EMAC0 COMMON comes here */
bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
- /* EMAC1 COMMON comes here */
bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
- /* DBU COMMON comes here */
bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
- /* DBG COMMON comes here */
bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
@@ -5736,30 +6219,16 @@
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
bp->port.need_hw_lock = 1;
break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- /* Fan failure is indicated by SPIO 5 */
- bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
- MISC_REGISTERS_SPIO_INPUT_HI_Z);
-
- /* set to active low mode */
- val = REG_RD(bp, MISC_REG_SPIO_INT);
- val |= ((1 << MISC_REGISTERS_SPIO_5) <<
- MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
- REG_WR(bp, MISC_REG_SPIO_INT, val);
-
- /* enable interrupt to signal the IGU */
- val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
- val |= (1 << MISC_REGISTERS_SPIO_5);
- REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
- break;
-
default:
break;
}
+ bnx2x_setup_fan_failure_detection(bp);
+
/* clear PXP2 attentions */
REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
@@ -5786,10 +6255,12 @@
REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
- /* Port PXP comes here */
bnx2x_init_block(bp, PXP_BLOCK, init_stage);
- /* Port PXP2 comes here */
bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
+
+ bnx2x_init_block(bp, TCM_BLOCK, init_stage);
+ bnx2x_init_block(bp, UCM_BLOCK, init_stage);
+ bnx2x_init_block(bp, CCM_BLOCK, init_stage);
#ifdef BCM_ISCSI
/* Port0 1
* Port1 385 */
@@ -5815,17 +6286,14 @@
REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
#endif
- /* Port CMs come here */
bnx2x_init_block(bp, XCM_BLOCK, init_stage);
- /* Port QM comes here */
#ifdef BCM_ISCSI
REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
#endif
- /* Port DQ comes here */
bnx2x_init_block(bp, DQ_BLOCK, init_stage);
bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
@@ -5852,15 +6320,11 @@
REG_WR(bp, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port*4, high);
- /* Port PRS comes here */
bnx2x_init_block(bp, PRS_BLOCK, init_stage);
- /* Port TSDM comes here */
+
bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
- /* Port CSDM comes here */
bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
- /* Port USDM comes here */
bnx2x_init_block(bp, USDM_BLOCK, init_stage);
- /* Port XSDM comes here */
bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
@@ -5868,9 +6332,7 @@
bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
- /* Port UPB comes here */
bnx2x_init_block(bp, UPB_BLOCK, init_stage);
- /* Port XPB comes here */
bnx2x_init_block(bp, XPB_BLOCK, init_stage);
bnx2x_init_block(bp, PBF_BLOCK, init_stage);
@@ -5900,11 +6362,8 @@
REG_WR_DMAE(bp, SRC_REG_LASTFREE0 + func*4, wb_write, 2);
REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + func*4, 10);
- /* Port SRCH comes here */
#endif
- /* Port CDU comes here */
bnx2x_init_block(bp, CDU_BLOCK, init_stage);
- /* Port CFC comes here */
bnx2x_init_block(bp, CFC_BLOCK, init_stage);
if (CHIP_IS_E1(bp)) {
@@ -5921,15 +6380,10 @@
REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4,
(IS_E1HMF(bp) ? 0xF7 : 0x7));
- /* Port PXPCS comes here */
bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
- /* Port EMAC0 comes here */
bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
- /* Port EMAC1 comes here */
bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
- /* Port DBU comes here */
bnx2x_init_block(bp, DBU_BLOCK, init_stage);
- /* Port DBG comes here */
bnx2x_init_block(bp, DBG_BLOCK, init_stage);
bnx2x_init_block(bp, NIG_BLOCK, init_stage);
@@ -5941,9 +6395,6 @@
REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
(IS_E1HMF(bp) ? 0x1 : 0x2));
- /* support pause requests from USDM, TSDM and BRB */
- REG_WR(bp, NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 + port*4, 0x7);
-
{
REG_WR(bp, NIG_REG_LLFC_ENABLE_0 + port*4, 0);
REG_WR(bp, NIG_REG_LLFC_OUT_EN_0 + port*4, 0);
@@ -5951,9 +6402,7 @@
}
}
- /* Port MCP comes here */
bnx2x_init_block(bp, MCP_BLOCK, init_stage);
- /* Port DMAE comes here */
bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
@@ -5989,10 +6438,15 @@
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
/* add SPIO 5 to group 0 */
- val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ {
+ u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ val = REG_RD(bp, reg_addr);
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
- REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val);
+ REG_WR(bp, reg_addr, val);
+ }
break;
default:
@@ -6057,9 +6511,15 @@
if (CHIP_IS_E1H(bp)) {
- for (i = 0; i < 9; i++)
- bnx2x_init_block(bp,
- cm_blocks[i], FUNC0_STAGE + func);
+ bnx2x_init_block(bp, MISC_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, TCM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, UCM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, CCM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, XCM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, TSEM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, USEM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, CSEM_BLOCK, FUNC0_STAGE + func);
+ bnx2x_init_block(bp, XSEM_BLOCK, FUNC0_STAGE + func);
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
@@ -6090,7 +6550,9 @@
bp->dmae_ready = 0;
mutex_init(&bp->dmae_mutex);
- bnx2x_gunzip_init(bp);
+ rc = bnx2x_gunzip_init(bp);
+ if (rc)
+ return rc;
switch (load_code) {
case FW_MSG_CODE_DRV_LOAD_COMMON:
@@ -6124,11 +6586,8 @@
bp->fw_drv_pulse_wr_seq =
(SHMEM_RD(bp, func_mb[func].drv_pulse_mb) &
DRV_PULSE_SEQ_MASK);
- bp->func_stx = SHMEM_RD(bp, func_mb[func].fw_mb_param);
- DP(BNX2X_MSG_MCP, "drv_pulse 0x%x func_stx 0x%x\n",
- bp->fw_drv_pulse_wr_seq, bp->func_stx);
- } else
- bp->func_stx = 0;
+ DP(BNX2X_MSG_MCP, "drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq);
+ }
/* this needs to be done before gunzip end */
bnx2x_zero_def_sb(bp);
@@ -6141,44 +6600,6 @@
return rc;
}
-/* send the MCP a request, block until there is a reply */
-static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
-{
- int func = BP_FUNC(bp);
- u32 seq = ++bp->fw_seq;
- u32 rc = 0;
- u32 cnt = 1;
- u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
-
- SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
- DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
-
- do {
- /* let the FW do it's magic ... */
- msleep(delay);
-
- rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
-
- /* Give the FW up to 2 second (200*10ms) */
- } while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
-
- DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
- cnt*delay, rc, seq);
-
- /* is this a reply to our command? */
- if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
- rc &= FW_MSG_CODE_MASK;
-
- } else {
- /* FW BUG! */
- BNX2X_ERR("FW failed to respond!\n");
- bnx2x_fw_dump(bp);
- rc = 0;
- }
-
- return rc;
-}
-
static void bnx2x_free_mem(struct bnx2x *bp)
{
@@ -6208,8 +6629,7 @@
/* status blocks */
BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk),
bnx2x_fp(bp, i, status_blk_mapping),
- sizeof(struct host_status_block) +
- sizeof(struct eth_tx_db_data));
+ sizeof(struct host_status_block));
}
/* Rx */
for_each_rx_queue(bp, i) {
@@ -6238,7 +6658,7 @@
BNX2X_FREE(bnx2x_fp(bp, i, tx_buf_ring));
BNX2X_PCI_FREE(bnx2x_fp(bp, i, tx_desc_ring),
bnx2x_fp(bp, i, tx_desc_mapping),
- sizeof(struct eth_tx_bd) * NUM_TX_BD);
+ sizeof(union eth_tx_bd_types) * NUM_TX_BD);
}
/* end of fastpath */
@@ -6289,8 +6709,7 @@
/* status blocks */
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, status_blk),
&bnx2x_fp(bp, i, status_blk_mapping),
- sizeof(struct host_status_block) +
- sizeof(struct eth_tx_db_data));
+ sizeof(struct host_status_block));
}
/* Rx */
for_each_rx_queue(bp, i) {
@@ -6317,19 +6736,12 @@
/* Tx */
for_each_tx_queue(bp, i) {
- bnx2x_fp(bp, i, hw_tx_prods) =
- (void *)(bnx2x_fp(bp, i, status_blk) + 1);
-
- bnx2x_fp(bp, i, tx_prods_mapping) =
- bnx2x_fp(bp, i, status_blk_mapping) +
- sizeof(struct host_status_block);
-
/* fastpath tx rings: tx_buf tx_desc */
BNX2X_ALLOC(bnx2x_fp(bp, i, tx_buf_ring),
sizeof(struct sw_tx_bd) * NUM_TX_BD);
BNX2X_PCI_ALLOC(bnx2x_fp(bp, i, tx_desc_ring),
&bnx2x_fp(bp, i, tx_desc_mapping),
- sizeof(struct eth_tx_bd) * NUM_TX_BD);
+ sizeof(union eth_tx_bd_types) * NUM_TX_BD);
}
/* end of fastpath */
@@ -6506,7 +6918,12 @@
for_each_queue(bp, i) {
struct bnx2x_fastpath *fp = &bp->fp[i];
- sprintf(fp->name, "%s.fp%d", bp->dev->name, i);
+ if (i < bp->num_rx_queues)
+ sprintf(fp->name, "%s-rx-%d", bp->dev->name, i);
+ else
+ sprintf(fp->name, "%s-tx-%d",
+ bp->dev->name, i - bp->num_rx_queues);
+
rc = request_irq(bp->msix_table[i + offset].vector,
bnx2x_msix_fp_int, 0, fp->name, fp);
if (rc) {
@@ -6519,16 +6936,11 @@
}
i = BNX2X_NUM_QUEUES(bp);
- if (is_multi(bp))
- printk(KERN_INFO PFX
- "%s: using MSI-X IRQs: sp %d fp %d - %d\n",
- bp->dev->name, bp->msix_table[0].vector,
- bp->msix_table[offset].vector,
- bp->msix_table[offset + i - 1].vector);
- else
- printk(KERN_INFO PFX "%s: using MSI-X IRQs: sp %d fp %d\n",
- bp->dev->name, bp->msix_table[0].vector,
- bp->msix_table[offset + i - 1].vector);
+ printk(KERN_INFO PFX "%s: using MSI-X IRQs: sp %d fp[%d] %d"
+ " ... fp[%d] %d\n",
+ bp->dev->name, bp->msix_table[0].vector,
+ 0, bp->msix_table[offset].vector,
+ i - 1, bp->msix_table[offset + i - 1].vector);
return 0;
}
@@ -6583,7 +6995,12 @@
static void bnx2x_netif_start(struct bnx2x *bp)
{
- if (atomic_dec_and_test(&bp->intr_sem)) {
+ int intr_sem;
+
+ intr_sem = atomic_dec_and_test(&bp->intr_sem);
+ smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
+
+ if (intr_sem) {
if (netif_running(bp->dev)) {
bnx2x_napi_enable(bp);
bnx2x_int_enable(bp);
@@ -6631,7 +7048,8 @@
config->config_table[0].target_table_entry.flags = 0;
else
CAM_INVALIDATE(config->config_table[0]);
- config->config_table[0].target_table_entry.client_id = 0;
+ config->config_table[0].target_table_entry.clients_bit_vector =
+ cpu_to_le32(1 << BP_L_ID(bp));
config->config_table[0].target_table_entry.vlan_id = 0;
DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
@@ -6650,7 +7068,8 @@
TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
else
CAM_INVALIDATE(config->config_table[1]);
- config->config_table[1].target_table_entry.client_id = 0;
+ config->config_table[1].target_table_entry.clients_bit_vector =
+ cpu_to_le32(1 << BP_L_ID(bp));
config->config_table[1].target_table_entry.vlan_id = 0;
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
@@ -6663,11 +7082,6 @@
struct mac_configuration_cmd_e1h *config =
(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
- if (set && (bp->state != BNX2X_STATE_OPEN)) {
- DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
- return;
- }
-
/* CAM allocation for E1H
* unicasts: by func number
* multicast: 20+FUNC*20, 20 each
@@ -6684,7 +7098,8 @@
swab16(*(u16 *)&bp->dev->dev_addr[2]);
config->config_table[0].lsb_mac_addr =
swab16(*(u16 *)&bp->dev->dev_addr[4]);
- config->config_table[0].client_id = BP_L_ID(bp);
+ config->config_table[0].clients_bit_vector =
+ cpu_to_le32(1 << BP_L_ID(bp));
config->config_table[0].vlan_id = 0;
config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
if (set)
@@ -6734,6 +7149,9 @@
}
msleep(1);
+
+ if (bp->panic)
+ return -EIO;
}
/* timeout! */
@@ -6781,67 +7199,111 @@
static int bnx2x_poll(struct napi_struct *napi, int budget);
-static void bnx2x_set_int_mode(struct bnx2x *bp)
+static void bnx2x_set_int_mode_msix(struct bnx2x *bp, int *num_rx_queues_out,
+ int *num_tx_queues_out)
{
- int num_queues;
+ int _num_rx_queues = 0, _num_tx_queues = 0;
+
+ switch (bp->multi_mode) {
+ case ETH_RSS_MODE_DISABLED:
+ _num_rx_queues = 1;
+ _num_tx_queues = 1;
+ break;
+
+ case ETH_RSS_MODE_REGULAR:
+ if (num_rx_queues)
+ _num_rx_queues = min_t(u32, num_rx_queues,
+ BNX2X_MAX_QUEUES(bp));
+ else
+ _num_rx_queues = min_t(u32, num_online_cpus(),
+ BNX2X_MAX_QUEUES(bp));
+
+ if (num_tx_queues)
+ _num_tx_queues = min_t(u32, num_tx_queues,
+ BNX2X_MAX_QUEUES(bp));
+ else
+ _num_tx_queues = min_t(u32, num_online_cpus(),
+ BNX2X_MAX_QUEUES(bp));
+
+ /* There must be not more Tx queues than Rx queues */
+ if (_num_tx_queues > _num_rx_queues) {
+ BNX2X_ERR("number of tx queues (%d) > "
+ "number of rx queues (%d)"
+ " defaulting to %d\n",
+ _num_tx_queues, _num_rx_queues,
+ _num_rx_queues);
+ _num_tx_queues = _num_rx_queues;
+ }
+ break;
+
+
+ default:
+ _num_rx_queues = 1;
+ _num_tx_queues = 1;
+ break;
+ }
+
+ *num_rx_queues_out = _num_rx_queues;
+ *num_tx_queues_out = _num_tx_queues;
+}
+
+static int bnx2x_set_int_mode(struct bnx2x *bp)
+{
+ int rc = 0;
switch (int_mode) {
case INT_MODE_INTx:
case INT_MODE_MSI:
- num_queues = 1;
- bp->num_rx_queues = num_queues;
- bp->num_tx_queues = num_queues;
- DP(NETIF_MSG_IFUP,
- "set number of queues to %d\n", num_queues);
+ bp->num_rx_queues = 1;
+ bp->num_tx_queues = 1;
+ DP(NETIF_MSG_IFUP, "set number of queues to 1\n");
break;
case INT_MODE_MSIX:
default:
- if (bp->multi_mode == ETH_RSS_MODE_REGULAR)
- num_queues = min_t(u32, num_online_cpus(),
- BNX2X_MAX_QUEUES(bp));
- else
- num_queues = 1;
- bp->num_rx_queues = num_queues;
- bp->num_tx_queues = num_queues;
- DP(NETIF_MSG_IFUP, "set number of rx queues to %d"
- " number of tx queues to %d\n",
+ /* Set interrupt mode according to bp->multi_mode value */
+ bnx2x_set_int_mode_msix(bp, &bp->num_rx_queues,
+ &bp->num_tx_queues);
+
+ DP(NETIF_MSG_IFUP, "set number of queues to: rx %d tx %d\n",
bp->num_rx_queues, bp->num_tx_queues);
+
/* if we can't use MSI-X we only need one fp,
* so try to enable MSI-X with the requested number of fp's
* and fallback to MSI or legacy INTx with one fp
*/
- if (bnx2x_enable_msix(bp)) {
+ rc = bnx2x_enable_msix(bp);
+ if (rc) {
/* failed to enable MSI-X */
- num_queues = 1;
- bp->num_rx_queues = num_queues;
- bp->num_tx_queues = num_queues;
if (bp->multi_mode)
BNX2X_ERR("Multi requested but failed to "
- "enable MSI-X set number of "
- "queues to %d\n", num_queues);
+ "enable MSI-X (rx %d tx %d), "
+ "set number of queues to 1\n",
+ bp->num_rx_queues, bp->num_tx_queues);
+ bp->num_rx_queues = 1;
+ bp->num_tx_queues = 1;
}
break;
}
bp->dev->real_num_tx_queues = bp->num_tx_queues;
+ return rc;
}
-static void bnx2x_set_rx_mode(struct net_device *dev);
/* must be called with rtnl_lock */
static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
{
u32 load_code;
- int i, rc = 0;
+ int i, rc;
+
#ifdef BNX2X_STOP_ON_ERROR
- DP(NETIF_MSG_IFUP, "enter load_mode %d\n", load_mode);
if (unlikely(bp->panic))
return -EPERM;
#endif
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
- bnx2x_set_int_mode(bp);
+ rc = bnx2x_set_int_mode(bp);
if (bnx2x_alloc_mem(bp))
return -ENOMEM;
@@ -6854,17 +7316,6 @@
netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
bnx2x_poll, 128);
-#ifdef BNX2X_STOP_ON_ERROR
- for_each_rx_queue(bp, i) {
- struct bnx2x_fastpath *fp = &bp->fp[i];
-
- fp->poll_no_work = 0;
- fp->poll_calls = 0;
- fp->poll_max_calls = 0;
- fp->poll_complete = 0;
- fp->poll_exit = 0;
- }
-#endif
bnx2x_napi_enable(bp);
if (bp->flags & USING_MSIX_FLAG) {
@@ -6874,6 +7325,8 @@
goto load_error1;
}
} else {
+ /* Fall to INTx if failed to enable MSI-X due to lack of
+ memory (in bnx2x_set_int_mode()) */
if ((rc != -ENOMEM) && (int_mode != INT_MODE_INTx))
bnx2x_enable_msi(bp);
bnx2x_ack_int(bp);
@@ -6942,6 +7395,12 @@
/* Setup NIC internals and enable interrupts */
bnx2x_nic_init(bp, load_code);
+ if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) &&
+ (bp->common.shmem2_base))
+ SHMEM2_WR(bp, dcc_support,
+ (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
+ SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
+
/* Send LOAD_DONE command to MCP */
if (!BP_NOMCP(bp)) {
load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
@@ -6957,7 +7416,12 @@
rc = bnx2x_setup_leading(bp);
if (rc) {
BNX2X_ERR("Setup leading failed!\n");
+#ifndef BNX2X_STOP_ON_ERROR
goto load_error3;
+#else
+ bp->panic = 1;
+ return -EBUSY;
+#endif
}
if (CHIP_IS_E1H(bp))
@@ -6966,17 +7430,18 @@
bp->state = BNX2X_STATE_DISABLED;
}
- if (bp->state == BNX2X_STATE_OPEN)
+ if (bp->state == BNX2X_STATE_OPEN) {
for_each_nondefault_queue(bp, i) {
rc = bnx2x_setup_multi(bp, i);
if (rc)
goto load_error3;
}
- if (CHIP_IS_E1(bp))
- bnx2x_set_mac_addr_e1(bp, 1);
- else
- bnx2x_set_mac_addr_e1h(bp, 1);
+ if (CHIP_IS_E1(bp))
+ bnx2x_set_mac_addr_e1(bp, 1);
+ else
+ bnx2x_set_mac_addr_e1h(bp, 1);
+ }
if (bp->port.pmf)
bnx2x_initial_phy_init(bp, load_mode);
@@ -6984,14 +7449,18 @@
/* Start fast path */
switch (load_mode) {
case LOAD_NORMAL:
- /* Tx queue should be only reenabled */
- netif_tx_wake_all_queues(bp->dev);
+ if (bp->state == BNX2X_STATE_OPEN) {
+ /* Tx queue should be only reenabled */
+ netif_tx_wake_all_queues(bp->dev);
+ }
/* Initialize the receive filter. */
bnx2x_set_rx_mode(bp->dev);
break;
case LOAD_OPEN:
netif_tx_start_all_queues(bp->dev);
+ if (bp->state != BNX2X_STATE_OPEN)
+ netif_tx_disable(bp->dev);
/* Initialize the receive filter. */
bnx2x_set_rx_mode(bp->dev);
break;
@@ -7190,9 +7659,11 @@
bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
+ /* Set "drop all" */
bp->rx_mode = BNX2X_RX_MODE_NONE;
bnx2x_set_storm_rx_mode(bp);
+ /* Disable HW interrupts, NAPI and Tx */
bnx2x_netif_stop(bp, 1);
del_timer_sync(&bp->timer);
@@ -7256,17 +7727,17 @@
for (i = 0; i < MC_HASH_SIZE; i++)
REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
+
+ REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
}
if (unload_mode == UNLOAD_NORMAL)
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
- else if (bp->flags & NO_WOL_FLAG) {
+ else if (bp->flags & NO_WOL_FLAG)
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
- if (CHIP_IS_E1H(bp))
- REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
- } else if (bp->wol) {
+ else if (bp->wol) {
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
u8 *mac_addr = bp->dev->dev_addr;
u32 val;
@@ -7569,8 +8040,10 @@
bp->common.flash_size, bp->common.flash_size);
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
+ bp->common.shmem2_base = REG_RD(bp, MISC_REG_GENERIC_CR_0);
bp->link_params.shmem_base = bp->common.shmem_base;
- BNX2X_DEV_INFO("shmem offset is 0x%x\n", bp->common.shmem_base);
+ BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
+ bp->common.shmem_base, bp->common.shmem2_base);
if (!bp->common.shmem_base ||
(bp->common.shmem_base < 0xA0000) ||
@@ -7610,6 +8083,9 @@
BNX2X_ERR("This driver needs bc_ver %X but found %X,"
" please upgrade BC\n", BNX2X_BC_VER, val);
}
+ bp->link_params.feature_config_flags |=
+ (val >= REQ_BC_VER_4_VRFY_OPT_MDL) ?
+ FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
if (BP_E1HVN(bp) == 0) {
pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
@@ -7770,6 +8246,18 @@
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8727)\n",
+ ext_phy_type);
+
+ bp->port.supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
ext_phy_type);
@@ -8024,6 +8512,7 @@
u32 val, val2;
u32 config;
u16 i;
+ u32 ext_phy_type;
bp->link_params.bp = bp;
bp->link_params.port = port;
@@ -8033,6 +8522,17 @@
bp->link_params.ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
+ /* BCM8727_NOC => BCM8727 no over current */
+ if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC) {
+ bp->link_params.ext_phy_config &=
+ ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ bp->link_params.ext_phy_config |=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727;
+ bp->link_params.feature_config_flags |=
+ FEATURE_CONFIG_BCM8727_NOC;
+ }
+
bp->link_params.speed_cap_mask =
SHMEM_RD(bp,
dev_info.port_hw_config[port].speed_capability_mask);
@@ -8053,17 +8553,10 @@
bp->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff);
}
- config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
- if (config & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED)
- bp->link_params.feature_config_flags |=
- FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED;
- else
- bp->link_params.feature_config_flags &=
- ~FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED;
-
/* If the device is capable of WoL, set the default state according
* to the HW
*/
+ config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
(config & PORT_FEATURE_WOL_ENABLED));
@@ -8073,12 +8566,25 @@
bp->link_params.ext_phy_config,
bp->link_params.speed_cap_mask, bp->port.link_config);
- bp->link_params.switch_cfg = (bp->port.link_config &
- PORT_FEATURE_CONNECTED_SWITCH_MASK);
+ bp->link_params.switch_cfg |= (bp->port.link_config &
+ PORT_FEATURE_CONNECTED_SWITCH_MASK);
bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
bnx2x_link_settings_requested(bp);
+ /*
+ * If connected directly, work with the internal PHY, otherwise, work
+ * with the external PHY
+ */
+ ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+ if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ bp->mdio.prtad = bp->link_params.phy_addr;
+
+ else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
+ bp->mdio.prtad =
+ XGXS_EXT_PHY_ADDR(bp->link_params.ext_phy_config);
+
val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
bp->dev->dev_addr[0] = (u8)(val2 >> 8 & 0xff);
@@ -8105,22 +8611,33 @@
bp->mf_config =
SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
- val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
+ val = (SHMEM_RD(bp, mf_cfg.func_mf_config[FUNC_0].e1hov_tag) &
FUNC_MF_CFG_E1HOV_TAG_MASK);
- if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
-
- bp->e1hov = val;
+ if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
bp->e1hmf = 1;
- BNX2X_DEV_INFO("MF mode E1HOV for func %d is %d "
- "(0x%04x)\n",
- func, bp->e1hov, bp->e1hov);
- } else {
- BNX2X_DEV_INFO("single function mode\n");
- if (BP_E1HVN(bp)) {
+ BNX2X_DEV_INFO("%s function mode\n",
+ IS_E1HMF(bp) ? "multi" : "single");
+
+ if (IS_E1HMF(bp)) {
+ val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].
+ e1hov_tag) &
+ FUNC_MF_CFG_E1HOV_TAG_MASK);
+ if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+ bp->e1hov = val;
+ BNX2X_DEV_INFO("E1HOV for func %d is %d "
+ "(0x%04x)\n",
+ func, bp->e1hov, bp->e1hov);
+ } else {
BNX2X_ERR("!!! No valid E1HOV for func %d,"
" aborting\n", func);
rc = -EPERM;
}
+ } else {
+ if (BP_E1HVN(bp)) {
+ BNX2X_ERR("!!! VN %d in single function mode,"
+ " aborting\n", BP_E1HVN(bp));
+ rc = -EPERM;
+ }
}
}
@@ -8170,6 +8687,7 @@
/* Disable interrupt handling until HW is initialized */
atomic_set(&bp->intr_sem, 1);
+ smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
mutex_init(&bp->port.phy_mutex);
@@ -8208,6 +8726,11 @@
bp->dev->features |= NETIF_F_LRO;
}
+ if (CHIP_IS_E1(bp))
+ bp->dropless_fc = 0;
+ else
+ bp->dropless_fc = dropless_fc;
+
bp->mrrs = mrrs;
bp->tx_ring_size = MAX_TX_AVAIL;
@@ -8269,6 +8792,7 @@
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
cmd->port = PORT_FIBRE;
break;
@@ -8290,7 +8814,7 @@
} else
cmd->port = PORT_TP;
- cmd->phy_address = bp->port.phy_addr;
+ cmd->phy_address = bp->mdio.prtad;
cmd->transceiver = XCVR_INTERNAL;
if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
@@ -8463,50 +8987,15 @@
return 0;
}
-#define PHY_FW_VER_LEN 10
-
-static void bnx2x_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct bnx2x *bp = netdev_priv(dev);
- u8 phy_fw_ver[PHY_FW_VER_LEN];
-
- strcpy(info->driver, DRV_MODULE_NAME);
- strcpy(info->version, DRV_MODULE_VERSION);
-
- phy_fw_ver[0] = '\0';
- if (bp->port.pmf) {
- bnx2x_acquire_phy_lock(bp);
- bnx2x_get_ext_phy_fw_version(&bp->link_params,
- (bp->state != BNX2X_STATE_CLOSED),
- phy_fw_ver, PHY_FW_VER_LEN);
- bnx2x_release_phy_lock(bp);
- }
-
- snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
- (bp->common.bc_ver & 0xff0000) >> 16,
- (bp->common.bc_ver & 0xff00) >> 8,
- (bp->common.bc_ver & 0xff),
- ((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
- strcpy(info->bus_info, pci_name(bp->pdev));
- info->n_stats = BNX2X_NUM_STATS;
- info->testinfo_len = BNX2X_NUM_TESTS;
- info->eedump_len = bp->common.flash_size;
- info->regdump_len = 0;
-}
-
#define IS_E1_ONLINE(info) (((info) & RI_E1_ONLINE) == RI_E1_ONLINE)
#define IS_E1H_ONLINE(info) (((info) & RI_E1H_ONLINE) == RI_E1H_ONLINE)
static int bnx2x_get_regs_len(struct net_device *dev)
{
- static u32 regdump_len;
struct bnx2x *bp = netdev_priv(dev);
+ int regdump_len = 0;
int i;
- if (regdump_len)
- return regdump_len;
-
if (CHIP_IS_E1(bp)) {
for (i = 0; i < REGS_COUNT; i++)
if (IS_E1_ONLINE(reg_addrs[i].info))
@@ -8573,6 +9062,38 @@
}
}
+#define PHY_FW_VER_LEN 10
+
+static void bnx2x_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+ u8 phy_fw_ver[PHY_FW_VER_LEN];
+
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+
+ phy_fw_ver[0] = '\0';
+ if (bp->port.pmf) {
+ bnx2x_acquire_phy_lock(bp);
+ bnx2x_get_ext_phy_fw_version(&bp->link_params,
+ (bp->state != BNX2X_STATE_CLOSED),
+ phy_fw_ver, PHY_FW_VER_LEN);
+ bnx2x_release_phy_lock(bp);
+ }
+
+ snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
+ (bp->common.bc_ver & 0xff0000) >> 16,
+ (bp->common.bc_ver & 0xff00) >> 8,
+ (bp->common.bc_ver & 0xff),
+ ((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
+ strcpy(info->bus_info, pci_name(bp->pdev));
+ info->n_stats = BNX2X_NUM_STATS;
+ info->testinfo_len = BNX2X_NUM_TESTS;
+ info->eedump_len = bp->common.flash_size;
+ info->regdump_len = bnx2x_get_regs_len(dev);
+}
+
static void bnx2x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -8638,8 +9159,7 @@
return 0;
}
-static u32
-bnx2x_get_link(struct net_device *dev)
+static u32 bnx2x_get_link(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -9013,7 +9533,8 @@
struct ethtool_eeprom *eeprom, u8 *eebuf)
{
struct bnx2x *bp = netdev_priv(dev);
- int rc;
+ int port = BP_PORT(bp);
+ int rc = 0;
if (!netif_running(dev))
return -EAGAIN;
@@ -9025,27 +9546,60 @@
/* parameters already validated in ethtool_set_eeprom */
- /* If the magic number is PHY (0x00504859) upgrade the PHY FW */
- if (eeprom->magic == 0x00504859)
- if (bp->port.pmf) {
+ /* PHY eeprom can be accessed only by the PMF */
+ if ((eeprom->magic >= 0x50485900) && (eeprom->magic <= 0x504859FF) &&
+ !bp->port.pmf)
+ return -EINVAL;
+
+ if (eeprom->magic == 0x50485950) {
+ /* 'PHYP' (0x50485950): prepare phy for FW upgrade */
+ bnx2x_stats_handle(bp, STATS_EVENT_STOP);
+
+ bnx2x_acquire_phy_lock(bp);
+ rc |= bnx2x_link_reset(&bp->link_params,
+ &bp->link_vars, 0);
+ if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101)
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+ MISC_REGISTERS_GPIO_HIGH, port);
+ bnx2x_release_phy_lock(bp);
+ bnx2x_link_report(bp);
+
+ } else if (eeprom->magic == 0x50485952) {
+ /* 'PHYR' (0x50485952): re-init link after FW upgrade */
+ if ((bp->state == BNX2X_STATE_OPEN) ||
+ (bp->state == BNX2X_STATE_DISABLED)) {
+ bnx2x_acquire_phy_lock(bp);
+ rc |= bnx2x_link_reset(&bp->link_params,
+ &bp->link_vars, 1);
+
+ rc |= bnx2x_phy_init(&bp->link_params,
+ &bp->link_vars);
+ bnx2x_release_phy_lock(bp);
+ bnx2x_calc_fc_adv(bp);
+ }
+ } else if (eeprom->magic == 0x53985943) {
+ /* 'PHYC' (0x53985943): PHY FW upgrade completed */
+ if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) {
+ u8 ext_phy_addr =
+ XGXS_EXT_PHY_ADDR(bp->link_params.ext_phy_config);
+
+ /* DSP Remove Download Mode */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+ MISC_REGISTERS_GPIO_LOW, port);
bnx2x_acquire_phy_lock(bp);
- rc = bnx2x_flash_download(bp, BP_PORT(bp),
- bp->link_params.ext_phy_config,
- (bp->state != BNX2X_STATE_CLOSED),
- eebuf, eeprom->len);
- if ((bp->state == BNX2X_STATE_OPEN) ||
- (bp->state == BNX2X_STATE_DISABLED)) {
- rc |= bnx2x_link_reset(&bp->link_params,
- &bp->link_vars, 1);
- rc |= bnx2x_phy_init(&bp->link_params,
- &bp->link_vars);
- }
- bnx2x_release_phy_lock(bp);
- } else /* Only the PMF can access the PHY */
- return -EINVAL;
- else
+ bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
+
+ /* wait 0.5 sec to allow it to run */
+ msleep(500);
+ bnx2x_ext_phy_hw_reset(bp, port);
+ msleep(500);
+ bnx2x_release_phy_lock(bp);
+ }
+ } else
rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
return rc;
@@ -9064,18 +9618,19 @@
return 0;
}
+#define BNX2X_MAX_COALES_TOUT (0xf0*12) /* Maximal coalescing timeout in us */
static int bnx2x_set_coalesce(struct net_device *dev,
struct ethtool_coalesce *coal)
{
struct bnx2x *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
- if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
- bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
+ if (bp->rx_ticks > BNX2X_MAX_COALES_TOUT)
+ bp->rx_ticks = BNX2X_MAX_COALES_TOUT;
bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
- if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
- bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
+ if (bp->tx_ticks > BNX2X_MAX_COALES_TOUT)
+ bp->tx_ticks = BNX2X_MAX_COALES_TOUT;
if (netif_running(dev))
bnx2x_update_coalesce(bp);
@@ -9296,10 +9851,9 @@
{ XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 4, 0x00000001 },
{ XCM_REG_WU_DA_CNT_CMD00, 4, 0x00000003 },
{ XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 4, 0x000000ff },
- { NIG_REG_EGRESS_MNG0_FIFO, 20, 0xffffffff },
{ NIG_REG_LLH0_T_BIT, 4, 0x00000001 },
-/* 20 */ { NIG_REG_EMAC0_IN_EN, 4, 0x00000001 },
- { NIG_REG_BMAC0_IN_EN, 4, 0x00000001 },
+ { NIG_REG_EMAC0_IN_EN, 4, 0x00000001 },
+/* 20 */ { NIG_REG_BMAC0_IN_EN, 4, 0x00000001 },
{ NIG_REG_XCM0_OUT_EN, 4, 0x00000001 },
{ NIG_REG_BRB0_OUT_EN, 4, 0x00000001 },
{ NIG_REG_LLH0_XCM_MASK, 4, 0x00000007 },
@@ -9308,8 +9862,8 @@
{ NIG_REG_LLH0_DEST_MAC_0_0, 160, 0xffffffff },
{ NIG_REG_LLH0_DEST_IP_0_1, 160, 0xffffffff },
{ NIG_REG_LLH0_IPV4_IPV6_0, 160, 0x00000001 },
-/* 30 */ { NIG_REG_LLH0_DEST_UDP_0, 160, 0x0000ffff },
- { NIG_REG_LLH0_DEST_TCP_0, 160, 0x0000ffff },
+ { NIG_REG_LLH0_DEST_UDP_0, 160, 0x0000ffff },
+/* 30 */ { NIG_REG_LLH0_DEST_TCP_0, 160, 0x0000ffff },
{ NIG_REG_LLH0_VLAN_ID_0, 160, 0x00000fff },
{ NIG_REG_XGXS_SERDES0_MODE_SEL, 4, 0x00000001 },
{ NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0, 4, 0x00000001 },
@@ -9435,12 +9989,14 @@
unsigned int pkt_size, num_pkts, i;
struct sk_buff *skb;
unsigned char *packet;
- struct bnx2x_fastpath *fp = &bp->fp[0];
+ struct bnx2x_fastpath *fp_rx = &bp->fp[0];
+ struct bnx2x_fastpath *fp_tx = &bp->fp[bp->num_rx_queues];
u16 tx_start_idx, tx_idx;
u16 rx_start_idx, rx_idx;
- u16 pkt_prod;
+ u16 pkt_prod, bd_prod;
struct sw_tx_bd *tx_buf;
- struct eth_tx_bd *tx_bd;
+ struct eth_tx_start_bd *tx_start_bd;
+ struct eth_tx_parse_bd *pbd = NULL;
dma_addr_t mapping;
union eth_rx_cqe *cqe;
u8 cqe_fp_flags;
@@ -9472,57 +10028,64 @@
}
packet = skb_put(skb, pkt_size);
memcpy(packet, bp->dev->dev_addr, ETH_ALEN);
- memset(packet + ETH_ALEN, 0, (ETH_HLEN - ETH_ALEN));
+ memset(packet + ETH_ALEN, 0, ETH_ALEN);
+ memset(packet + 2*ETH_ALEN, 0x77, (ETH_HLEN - 2*ETH_ALEN));
for (i = ETH_HLEN; i < pkt_size; i++)
packet[i] = (unsigned char) (i & 0xff);
/* send the loopback packet */
num_pkts = 0;
- tx_start_idx = le16_to_cpu(*fp->tx_cons_sb);
- rx_start_idx = le16_to_cpu(*fp->rx_cons_sb);
+ tx_start_idx = le16_to_cpu(*fp_tx->tx_cons_sb);
+ rx_start_idx = le16_to_cpu(*fp_rx->rx_cons_sb);
- pkt_prod = fp->tx_pkt_prod++;
- tx_buf = &fp->tx_buf_ring[TX_BD(pkt_prod)];
- tx_buf->first_bd = fp->tx_bd_prod;
+ pkt_prod = fp_tx->tx_pkt_prod++;
+ tx_buf = &fp_tx->tx_buf_ring[TX_BD(pkt_prod)];
+ tx_buf->first_bd = fp_tx->tx_bd_prod;
tx_buf->skb = skb;
+ tx_buf->flags = 0;
- tx_bd = &fp->tx_desc_ring[TX_BD(fp->tx_bd_prod)];
+ bd_prod = TX_BD(fp_tx->tx_bd_prod);
+ tx_start_bd = &fp_tx->tx_desc_ring[bd_prod].start_bd;
mapping = pci_map_single(bp->pdev, skb->data,
skb_headlen(skb), PCI_DMA_TODEVICE);
- tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
- tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
- tx_bd->nbd = cpu_to_le16(1);
- tx_bd->nbytes = cpu_to_le16(skb_headlen(skb));
- tx_bd->vlan = cpu_to_le16(pkt_prod);
- tx_bd->bd_flags.as_bitfield = (ETH_TX_BD_FLAGS_START_BD |
- ETH_TX_BD_FLAGS_END_BD);
- tx_bd->general_data = ((UNICAST_ADDRESS <<
- ETH_TX_BD_ETH_ADDR_TYPE_SHIFT) | 1);
+ tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+ tx_start_bd->nbd = cpu_to_le16(2); /* start + pbd */
+ tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
+ tx_start_bd->vlan = cpu_to_le16(pkt_prod);
+ tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+ tx_start_bd->general_data = ((UNICAST_ADDRESS <<
+ ETH_TX_START_BD_ETH_ADDR_TYPE_SHIFT) | 1);
+
+ /* turn on parsing and get a BD */
+ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
+ pbd = &fp_tx->tx_desc_ring[bd_prod].parse_bd;
+
+ memset(pbd, 0, sizeof(struct eth_tx_parse_bd));
wmb();
- le16_add_cpu(&fp->hw_tx_prods->bds_prod, 1);
- mb(); /* FW restriction: must not reorder writing nbd and packets */
- le32_add_cpu(&fp->hw_tx_prods->packets_prod, 1);
- DOORBELL(bp, fp->index, 0);
+ fp_tx->tx_db.data.prod += 2;
+ barrier();
+ DOORBELL(bp, fp_tx->index - bp->num_rx_queues, fp_tx->tx_db.raw);
mmiowb();
num_pkts++;
- fp->tx_bd_prod++;
+ fp_tx->tx_bd_prod += 2; /* start + pbd */
bp->dev->trans_start = jiffies;
udelay(100);
- tx_idx = le16_to_cpu(*fp->tx_cons_sb);
+ tx_idx = le16_to_cpu(*fp_tx->tx_cons_sb);
if (tx_idx != tx_start_idx + num_pkts)
goto test_loopback_exit;
- rx_idx = le16_to_cpu(*fp->rx_cons_sb);
+ rx_idx = le16_to_cpu(*fp_rx->rx_cons_sb);
if (rx_idx != rx_start_idx + num_pkts)
goto test_loopback_exit;
- cqe = &fp->rx_comp_ring[RCQ_BD(fp->rx_comp_cons)];
+ cqe = &fp_rx->rx_comp_ring[RCQ_BD(fp_rx->rx_comp_cons)];
cqe_fp_flags = cqe->fast_path_cqe.type_error_flags;
if (CQE_TYPE(cqe_fp_flags) || (cqe_fp_flags & ETH_RX_ERROR_FALGS))
goto test_loopback_rx_exit;
@@ -9531,7 +10094,7 @@
if (len != pkt_size)
goto test_loopback_rx_exit;
- rx_buf = &fp->rx_buf_ring[RX_BD(fp->rx_bd_cons)];
+ rx_buf = &fp_rx->rx_buf_ring[RX_BD(fp_rx->rx_bd_cons)];
skb = rx_buf->skb;
skb_reserve(skb, cqe->fast_path_cqe.placement_offset);
for (i = ETH_HLEN; i < pkt_size; i++)
@@ -9542,14 +10105,14 @@
test_loopback_rx_exit:
- fp->rx_bd_cons = NEXT_RX_IDX(fp->rx_bd_cons);
- fp->rx_bd_prod = NEXT_RX_IDX(fp->rx_bd_prod);
- fp->rx_comp_cons = NEXT_RCQ_IDX(fp->rx_comp_cons);
- fp->rx_comp_prod = NEXT_RCQ_IDX(fp->rx_comp_prod);
+ fp_rx->rx_bd_cons = NEXT_RX_IDX(fp_rx->rx_bd_cons);
+ fp_rx->rx_bd_prod = NEXT_RX_IDX(fp_rx->rx_bd_prod);
+ fp_rx->rx_comp_cons = NEXT_RCQ_IDX(fp_rx->rx_comp_cons);
+ fp_rx->rx_comp_prod = NEXT_RCQ_IDX(fp_rx->rx_comp_prod);
/* Update producers */
- bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
- fp->rx_sge_prod);
+ bnx2x_update_rx_prod(bp, fp_rx, fp_rx->rx_bd_prod, fp_rx->rx_comp_prod,
+ fp_rx->rx_sge_prod);
test_loopback_exit:
bp->link_params.loopback_mode = LOOPBACK_NONE;
@@ -9606,7 +10169,7 @@
__be32 buf[0x350 / 4];
u8 *data = (u8 *)buf;
int i, rc;
- u32 magic, csum;
+ u32 magic, crc;
rc = bnx2x_nvram_read(bp, 0, data, 4);
if (rc) {
@@ -9631,10 +10194,10 @@
goto test_nvram_exit;
}
- csum = ether_crc_le(nvram_tbl[i].size, data);
- if (csum != CRC32_RESIDUAL) {
+ crc = ether_crc_le(nvram_tbl[i].size, data);
+ if (crc != CRC32_RESIDUAL) {
DP(NETIF_MSG_PROBE,
- "nvram_tbl[%d] csum value (0x%08x)\n", i, csum);
+ "nvram_tbl[%d] crc value (0x%08x)\n", i, crc);
rc = -ENODEV;
goto test_nvram_exit;
}
@@ -9692,8 +10255,15 @@
etest->flags &= ~ETH_TEST_FL_OFFLINE;
if (etest->flags & ETH_TEST_FL_OFFLINE) {
+ int port = BP_PORT(bp);
+ u32 val;
u8 link_up;
+ /* save current value of input enable for TX port IF */
+ val = REG_RD(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4);
+ /* disable input for TX port IF */
+ REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
+
link_up = bp->link_vars.link_up;
bnx2x_nic_unload(bp, UNLOAD_NORMAL);
bnx2x_nic_load(bp, LOAD_DIAG);
@@ -9713,6 +10283,10 @@
etest->flags |= ETH_TEST_FL_FAILED;
bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+
+ /* restore input for TX port IF */
+ REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, val);
+
bnx2x_nic_load(bp, LOAD_NORMAL);
/* wait until link state is restored */
bnx2x_wait_for_link(bp, link_up);
@@ -9871,7 +10445,7 @@
case ETH_SS_STATS:
if (is_multi(bp)) {
k = 0;
- for_each_queue(bp, i) {
+ for_each_rx_queue(bp, i) {
for (j = 0; j < BNX2X_NUM_Q_STATS; j++)
sprintf(buf + (k + j)*ETH_GSTRING_LEN,
bnx2x_q_stats_arr[j].string, i);
@@ -9905,7 +10479,7 @@
int i, num_stats;
if (is_multi(bp)) {
- num_stats = BNX2X_NUM_Q_STATS * BNX2X_NUM_QUEUES(bp);
+ num_stats = BNX2X_NUM_Q_STATS * bp->num_rx_queues;
if (!IS_E1HMF_MODE_STAT(bp))
num_stats += BNX2X_NUM_STATS;
} else {
@@ -9930,7 +10504,7 @@
if (is_multi(bp)) {
k = 0;
- for_each_queue(bp, i) {
+ for_each_rx_queue(bp, i) {
hw_stats = (u32 *)&bp->fp[i].eth_q_stats;
for (j = 0; j < BNX2X_NUM_Q_STATS; j++) {
if (bnx2x_q_stats_arr[j].size == 0) {
@@ -10032,7 +10606,7 @@
return 0;
}
-static struct ethtool_ops bnx2x_ethtool_ops = {
+static const struct ethtool_ops bnx2x_ethtool_ops = {
.get_settings = bnx2x_get_settings,
.set_settings = bnx2x_set_settings,
.get_drvinfo = bnx2x_get_drvinfo,
@@ -10143,15 +10717,11 @@
goto poll_panic;
#endif
- prefetch(fp->tx_buf_ring[TX_BD(fp->tx_pkt_cons)].skb);
prefetch(fp->rx_buf_ring[RX_BD(fp->rx_bd_cons)].skb);
prefetch((char *)(fp->rx_buf_ring[RX_BD(fp->rx_bd_cons)].skb) + 256);
bnx2x_update_fpsb_idx(fp);
- if (bnx2x_has_tx_work(fp))
- bnx2x_tx_int(fp);
-
if (bnx2x_has_rx_work(fp)) {
work_done = bnx2x_rx_int(fp, budget);
@@ -10160,11 +10730,11 @@
goto poll_again;
}
- /* BNX2X_HAS_WORK() reads the status block, thus we need to
+ /* bnx2x_has_rx_work() reads the status block, thus we need to
* ensure that status block indices have been actually read
- * (bnx2x_update_fpsb_idx) prior to this check (BNX2X_HAS_WORK)
+ * (bnx2x_update_fpsb_idx) prior to this check (bnx2x_has_rx_work)
* so that we won't write the "newer" value of the status block to IGU
- * (if there was a DMA right after BNX2X_HAS_WORK and
+ * (if there was a DMA right after bnx2x_has_rx_work and
* if there is no rmb, the memory reading (bnx2x_update_fpsb_idx)
* may be postponed to right before bnx2x_ack_sb). In this case
* there will never be another interrupt until there is another update
@@ -10172,7 +10742,7 @@
*/
rmb();
- if (!BNX2X_HAS_WORK(fp)) {
+ if (!bnx2x_has_rx_work(fp)) {
#ifdef BNX2X_STOP_ON_ERROR
poll_panic:
#endif
@@ -10197,10 +10767,11 @@
*/
static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
struct bnx2x_fastpath *fp,
- struct eth_tx_bd **tx_bd, u16 hlen,
+ struct sw_tx_bd *tx_buf,
+ struct eth_tx_start_bd **tx_bd, u16 hlen,
u16 bd_prod, int nbd)
{
- struct eth_tx_bd *h_tx_bd = *tx_bd;
+ struct eth_tx_start_bd *h_tx_bd = *tx_bd;
struct eth_tx_bd *d_tx_bd;
dma_addr_t mapping;
int old_len = le16_to_cpu(h_tx_bd->nbytes);
@@ -10216,7 +10787,7 @@
/* now get a new data BD
* (after the pbd) and fill it */
bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
- d_tx_bd = &fp->tx_desc_ring[bd_prod];
+ d_tx_bd = &fp->tx_desc_ring[bd_prod].reg_bd;
mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi),
le32_to_cpu(h_tx_bd->addr_lo)) + hlen;
@@ -10224,17 +10795,16 @@
d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
d_tx_bd->nbytes = cpu_to_le16(old_len - hlen);
- d_tx_bd->vlan = 0;
- /* this marks the BD as one that has no individual mapping
- * the FW ignores this flag in a BD not marked start
- */
- d_tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO;
+
+ /* this marks the BD as one that has no individual mapping */
+ tx_buf->flags |= BNX2X_TSO_SPLIT_BD;
+
DP(NETIF_MSG_TX_QUEUED,
"TSO split data size is %d (%x:%x)\n",
d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo);
- /* update tx_bd for marking the last BD flag */
- *tx_bd = d_tx_bd;
+ /* update tx_bd */
+ *tx_bd = (struct eth_tx_start_bd *)d_tx_bd;
return bd_prod;
}
@@ -10366,21 +10936,22 @@
* bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
* netif_wake_queue()
*/
-static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
- struct bnx2x_fastpath *fp;
+ struct bnx2x_fastpath *fp, *fp_stat;
struct netdev_queue *txq;
struct sw_tx_bd *tx_buf;
- struct eth_tx_bd *tx_bd;
+ struct eth_tx_start_bd *tx_start_bd;
+ struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
struct eth_tx_parse_bd *pbd = NULL;
u16 pkt_prod, bd_prod;
int nbd, fp_index;
dma_addr_t mapping;
u32 xmit_type = bnx2x_xmit_type(bp, skb);
- int vlan_off = (bp->e1hov ? 4 : 0);
int i;
u8 hlen = 0;
+ __le16 pkt_size = 0;
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
@@ -10390,10 +10961,11 @@
fp_index = skb_get_queue_mapping(skb);
txq = netdev_get_tx_queue(dev, fp_index);
- fp = &bp->fp[fp_index];
+ fp = &bp->fp[fp_index + bp->num_rx_queues];
+ fp_stat = &bp->fp[fp_index];
if (unlikely(bnx2x_tx_avail(fp) < (skb_shinfo(skb)->nr_frags + 3))) {
- fp->eth_q_stats.driver_xoff++,
+ fp_stat->eth_q_stats.driver_xoff++;
netif_tx_stop_queue(txq);
BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
return NETDEV_TX_BUSY;
@@ -10422,7 +10994,7 @@
/*
Please read carefully. First we use one BD which we mark as start,
- then for TSO or xsum we have a parsing info BD,
+ then we have a parsing info BD (used for TSO or xsum),
and only then we have the rest of the TSO BDs.
(don't forget to mark the last one as last,
and to unmap only AFTER you write to the BD ...)
@@ -10434,42 +11006,40 @@
/* get a tx_buf and first BD */
tx_buf = &fp->tx_buf_ring[TX_BD(pkt_prod)];
- tx_bd = &fp->tx_desc_ring[bd_prod];
+ tx_start_bd = &fp->tx_desc_ring[bd_prod].start_bd;
- tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
- tx_bd->general_data = (UNICAST_ADDRESS <<
- ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
+ tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+ tx_start_bd->general_data = (UNICAST_ADDRESS <<
+ ETH_TX_START_BD_ETH_ADDR_TYPE_SHIFT);
/* header nbd */
- tx_bd->general_data |= (1 << ETH_TX_BD_HDR_NBDS_SHIFT);
+ tx_start_bd->general_data |= (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
/* remember the first BD of the packet */
tx_buf->first_bd = fp->tx_bd_prod;
tx_buf->skb = skb;
+ tx_buf->flags = 0;
DP(NETIF_MSG_TX_QUEUED,
"sending pkt %u @%p next_idx %u bd %u @%p\n",
- pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_bd);
+ pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_start_bd);
#ifdef BCM_VLAN
if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb) &&
(bp->flags & HW_VLAN_TX_FLAG)) {
- tx_bd->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
- tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
- vlan_off += 4;
+ tx_start_bd->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
} else
#endif
- tx_bd->vlan = cpu_to_le16(pkt_prod);
+ tx_start_bd->vlan = cpu_to_le16(pkt_prod);
- if (xmit_type) {
- /* turn on parsing and get a BD */
- bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
- pbd = (void *)&fp->tx_desc_ring[bd_prod];
+ /* turn on parsing and get a BD */
+ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
+ pbd = &fp->tx_desc_ring[bd_prod].parse_bd;
- memset(pbd, 0, sizeof(struct eth_tx_parse_bd));
- }
+ memset(pbd, 0, sizeof(struct eth_tx_parse_bd));
if (xmit_type & XMIT_CSUM) {
- hlen = (skb_network_header(skb) - skb->data + vlan_off) / 2;
+ hlen = (skb_network_header(skb) - skb->data) / 2;
/* for now NS flag is not used in Linux */
pbd->global_data =
@@ -10482,15 +11052,16 @@
hlen += pbd->ip_hlen + tcp_hdrlen(skb) / 2;
pbd->total_hlen = cpu_to_le16(hlen);
- hlen = hlen*2 - vlan_off;
+ hlen = hlen*2;
- tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_TCP_CSUM;
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM;
if (xmit_type & XMIT_CSUM_V4)
- tx_bd->bd_flags.as_bitfield |=
+ tx_start_bd->bd_flags.as_bitfield |=
ETH_TX_BD_FLAGS_IP_CSUM;
else
- tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IPV6;
+ tx_start_bd->bd_flags.as_bitfield |=
+ ETH_TX_BD_FLAGS_IPV6;
if (xmit_type & XMIT_CSUM_TCP) {
pbd->tcp_pseudo_csum = swab16(tcp_hdr(skb)->check);
@@ -10498,13 +11069,11 @@
} else {
s8 fix = SKB_CS_OFF(skb); /* signed! */
- pbd->global_data |= ETH_TX_PARSE_BD_CS_ANY_FLG;
- pbd->cs_offset = fix / 2;
+ pbd->global_data |= ETH_TX_PARSE_BD_UDP_CS_FLG;
DP(NETIF_MSG_TX_QUEUED,
- "hlen %d offset %d fix %d csum before fix %x\n",
- le16_to_cpu(pbd->total_hlen), pbd->cs_offset, fix,
- SKB_CS(skb));
+ "hlen %d fix %d csum before fix %x\n",
+ le16_to_cpu(pbd->total_hlen), fix, SKB_CS(skb));
/* HW bug: fixup the CSUM */
pbd->tcp_pseudo_csum =
@@ -10519,17 +11088,18 @@
mapping = pci_map_single(bp->pdev, skb->data,
skb_headlen(skb), PCI_DMA_TODEVICE);
- tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
- tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
- nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL) ? 1 : 2);
- tx_bd->nbd = cpu_to_le16(nbd);
- tx_bd->nbytes = cpu_to_le16(skb_headlen(skb));
+ tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+ nbd = skb_shinfo(skb)->nr_frags + 2; /* start_bd + pbd + frags */
+ tx_start_bd->nbd = cpu_to_le16(nbd);
+ tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
+ pkt_size = tx_start_bd->nbytes;
DP(NETIF_MSG_TX_QUEUED, "first bd @%p addr (%x:%x) nbd %d"
" nbytes %d flags %x vlan %x\n",
- tx_bd, tx_bd->addr_hi, tx_bd->addr_lo, le16_to_cpu(tx_bd->nbd),
- le16_to_cpu(tx_bd->nbytes), tx_bd->bd_flags.as_bitfield,
- le16_to_cpu(tx_bd->vlan));
+ tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo,
+ le16_to_cpu(tx_start_bd->nbd), le16_to_cpu(tx_start_bd->nbytes),
+ tx_start_bd->bd_flags.as_bitfield, le16_to_cpu(tx_start_bd->vlan));
if (xmit_type & XMIT_GSO) {
@@ -10538,11 +11108,11 @@
skb->len, hlen, skb_headlen(skb),
skb_shinfo(skb)->gso_size);
- tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
if (unlikely(skb_headlen(skb) > hlen))
- bd_prod = bnx2x_tx_split(bp, fp, &tx_bd, hlen,
- bd_prod, ++nbd);
+ bd_prod = bnx2x_tx_split(bp, fp, tx_buf, &tx_start_bd,
+ hlen, bd_prod, ++nbd);
pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
pbd->tcp_send_seq = swab32(tcp_hdr(skb)->seq);
@@ -10563,33 +11133,31 @@
pbd->global_data |= ETH_TX_PARSE_BD_PSEUDO_CS_WITHOUT_LEN;
}
+ tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
- tx_bd = &fp->tx_desc_ring[bd_prod];
+ tx_data_bd = &fp->tx_desc_ring[bd_prod].reg_bd;
+ if (total_pkt_bd == NULL)
+ total_pkt_bd = &fp->tx_desc_ring[bd_prod].reg_bd;
mapping = pci_map_page(bp->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
- tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
- tx_bd->nbytes = cpu_to_le16(frag->size);
- tx_bd->vlan = cpu_to_le16(pkt_prod);
- tx_bd->bd_flags.as_bitfield = 0;
+ tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
+ tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
+ tx_data_bd->nbytes = cpu_to_le16(frag->size);
+ le16_add_cpu(&pkt_size, frag->size);
DP(NETIF_MSG_TX_QUEUED,
- "frag %d bd @%p addr (%x:%x) nbytes %d flags %x\n",
- i, tx_bd, tx_bd->addr_hi, tx_bd->addr_lo,
- le16_to_cpu(tx_bd->nbytes), tx_bd->bd_flags.as_bitfield);
+ "frag %d bd @%p addr (%x:%x) nbytes %d\n",
+ i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo,
+ le16_to_cpu(tx_data_bd->nbytes));
}
- /* now at last mark the BD as the last BD */
- tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_END_BD;
-
- DP(NETIF_MSG_TX_QUEUED, "last bd @%p flags %x\n",
- tx_bd, tx_bd->bd_flags.as_bitfield);
+ DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd);
bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
@@ -10599,6 +11167,9 @@
if (TX_BD_POFF(bd_prod) < nbd)
nbd++;
+ if (total_pkt_bd != NULL)
+ total_pkt_bd->total_pkt_bytes = pkt_size;
+
if (pbd)
DP(NETIF_MSG_TX_QUEUED,
"PBD @%p ip_data %x ip_hlen %u ip_id %u lso_mss %u"
@@ -10618,25 +11189,24 @@
*/
wmb();
- le16_add_cpu(&fp->hw_tx_prods->bds_prod, nbd);
- mb(); /* FW restriction: must not reorder writing nbd and packets */
- le32_add_cpu(&fp->hw_tx_prods->packets_prod, 1);
- DOORBELL(bp, fp->index, 0);
+ fp->tx_db.data.prod += nbd;
+ barrier();
+ DOORBELL(bp, fp->index - bp->num_rx_queues, fp->tx_db.raw);
mmiowb();
fp->tx_bd_prod += nbd;
if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
+ netif_tx_stop_queue(txq);
/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
if we put Tx into XOFF state. */
smp_mb();
- netif_tx_stop_queue(txq);
- fp->eth_q_stats.driver_xoff++;
+ fp_stat->eth_q_stats.driver_xoff++;
if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
netif_tx_wake_queue(txq);
}
- fp->tx_pkt++;
+ fp_stat->tx_pkt++;
return NETDEV_TX_OK;
}
@@ -10712,8 +11282,9 @@
cpu_to_le16(port);
config->config_table[i].
target_table_entry.flags = 0;
- config->config_table[i].
- target_table_entry.client_id = 0;
+ config->config_table[i].target_table_entry.
+ clients_bit_vector =
+ cpu_to_le32(1 << BP_L_ID(bp));
config->config_table[i].
target_table_entry.vlan_id = 0;
@@ -10808,54 +11379,77 @@
}
/* called with rtnl_lock */
+static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
+ int devad, u16 addr)
+{
+ struct bnx2x *bp = netdev_priv(netdev);
+ u16 value;
+ int rc;
+ u32 phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+
+ DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
+ prtad, devad, addr);
+
+ if (prtad != bp->mdio.prtad) {
+ DP(NETIF_MSG_LINK, "prtad missmatch (cmd:0x%x != bp:0x%x)\n",
+ prtad, bp->mdio.prtad);
+ return -EINVAL;
+ }
+
+ /* The HW expects different devad if CL22 is used */
+ devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
+
+ bnx2x_acquire_phy_lock(bp);
+ rc = bnx2x_cl45_read(bp, BP_PORT(bp), phy_type, prtad,
+ devad, addr, &value);
+ bnx2x_release_phy_lock(bp);
+ DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
+
+ if (!rc)
+ rc = value;
+ return rc;
+}
+
+/* called with rtnl_lock */
+static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
+ u16 addr, u16 value)
+{
+ struct bnx2x *bp = netdev_priv(netdev);
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
+ int rc;
+
+ DP(NETIF_MSG_LINK, "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x,"
+ " value 0x%x\n", prtad, devad, addr, value);
+
+ if (prtad != bp->mdio.prtad) {
+ DP(NETIF_MSG_LINK, "prtad missmatch (cmd:0x%x != bp:0x%x)\n",
+ prtad, bp->mdio.prtad);
+ return -EINVAL;
+ }
+
+ /* The HW expects different devad if CL22 is used */
+ devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
+
+ bnx2x_acquire_phy_lock(bp);
+ rc = bnx2x_cl45_write(bp, BP_PORT(bp), ext_phy_type, prtad,
+ devad, addr, value);
+ bnx2x_release_phy_lock(bp);
+ return rc;
+}
+
+/* called with rtnl_lock */
static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct mii_ioctl_data *data = if_mii(ifr);
struct bnx2x *bp = netdev_priv(dev);
- int port = BP_PORT(bp);
- int err;
+ struct mii_ioctl_data *mdio = if_mii(ifr);
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = bp->port.phy_addr;
+ DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",
+ mdio->phy_id, mdio->reg_num, mdio->val_in);
- /* fallthrough */
+ if (!netif_running(dev))
+ return -EAGAIN;
- case SIOCGMIIREG: {
- u16 mii_regval;
-
- if (!netif_running(dev))
- return -EAGAIN;
-
- mutex_lock(&bp->port.phy_mutex);
- err = bnx2x_cl45_read(bp, port, 0, bp->port.phy_addr,
- DEFAULT_PHY_DEV_ADDR,
- (data->reg_num & 0x1f), &mii_regval);
- data->val_out = mii_regval;
- mutex_unlock(&bp->port.phy_mutex);
- return err;
- }
-
- case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (!netif_running(dev))
- return -EAGAIN;
-
- mutex_lock(&bp->port.phy_mutex);
- err = bnx2x_cl45_write(bp, port, 0, bp->port.phy_addr,
- DEFAULT_PHY_DEV_ADDR,
- (data->reg_num & 0x1f), data->val_in);
- mutex_unlock(&bp->port.phy_mutex);
- return err;
-
- default:
- /* do nothing */
- break;
- }
-
- return -EOPNOTSUPP;
+ return mdio_mii_ioctl(&bp->mdio, mdio, cmd);
}
/* called with rtnl_lock */
@@ -11065,12 +11659,27 @@
dev->features |= NETIF_F_HW_CSUM;
if (bp->flags & USING_DAC_FLAG)
dev->features |= NETIF_F_HIGHDMA;
+ dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
+ dev->features |= NETIF_F_TSO6;
#ifdef BCM_VLAN
dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
+
+ dev->vlan_features |= NETIF_F_SG;
+ dev->vlan_features |= NETIF_F_HW_CSUM;
+ if (bp->flags & USING_DAC_FLAG)
+ dev->vlan_features |= NETIF_F_HIGHDMA;
+ dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
+ dev->vlan_features |= NETIF_F_TSO6;
#endif
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
- dev->features |= NETIF_F_TSO6;
+
+ /* get_port_hwinfo() will set prtad and mmds properly */
+ bp->mdio.prtad = MDIO_PRTAD_NONE;
+ bp->mdio.mmds = 0;
+ bp->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+ bp->mdio.dev = dev;
+ bp->mdio.mdio_read = bnx2x_mdio_read;
+ bp->mdio.mdio_write = bnx2x_mdio_write;
return 0;
@@ -11096,31 +11705,26 @@
return rc;
}
-static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp)
+static void __devinit bnx2x_get_pcie_width_speed(struct bnx2x *bp,
+ int *width, int *speed)
{
u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
- val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
- return val;
+ *width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
+
+ /* return value of 1=2.5GHz 2=5GHz */
+ *speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
}
-/* return value of 1=2.5GHz 2=5GHz */
-static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
-{
- u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
-
- val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
- return val;
-}
static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
{
+ const struct firmware *firmware = bp->firmware;
struct bnx2x_fw_file_hdr *fw_hdr;
struct bnx2x_fw_file_section *sections;
- u16 *ops_offsets;
u32 offset, len, num_ops;
+ u16 *ops_offsets;
int i;
- const struct firmware *firmware = bp->firmware;
- const u8 * fw_ver;
+ const u8 *fw_ver;
if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
return -EINVAL;
@@ -11134,7 +11738,8 @@
offset = be32_to_cpu(sections[i].offset);
len = be32_to_cpu(sections[i].len);
if (offset + len > firmware->size) {
- printk(KERN_ERR PFX "Section %d length is out of bounds\n", i);
+ printk(KERN_ERR PFX "Section %d length is out of "
+ "bounds\n", i);
return -EINVAL;
}
}
@@ -11146,7 +11751,8 @@
for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
if (be16_to_cpu(ops_offsets[i]) > num_ops) {
- printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i);
+ printk(KERN_ERR PFX "Section offset %d is out of "
+ "bounds\n", i);
return -EINVAL;
}
}
@@ -11165,17 +11771,17 @@
BCM_5710_FW_MINOR_VERSION,
BCM_5710_FW_REVISION_VERSION,
BCM_5710_FW_ENGINEERING_VERSION);
- return -EINVAL;
+ return -EINVAL;
}
return 0;
}
-static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+static inline void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
{
+ const __be32 *source = (const __be32 *)_source;
+ u32 *target = (u32 *)_target;
u32 i;
- const __be32 *source = (const __be32*)_source;
- u32 *target = (u32*)_target;
for (i = 0; i < n/4; i++)
target[i] = be32_to_cpu(source[i]);
@@ -11185,66 +11791,67 @@
Ops array is stored in the following format:
{op(8bit), offset(24bit, big endian), data(32bit, big endian)}
*/
-static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+static inline void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
{
+ const __be32 *source = (const __be32 *)_source;
+ struct raw_op *target = (struct raw_op *)_target;
u32 i, j, tmp;
- const __be32 *source = (const __be32*)_source;
- struct raw_op *target = (struct raw_op*)_target;
- for (i = 0, j = 0; i < n/8; i++, j+=2) {
+ for (i = 0, j = 0; i < n/8; i++, j += 2) {
tmp = be32_to_cpu(source[j]);
target[i].op = (tmp >> 24) & 0xff;
target[i].offset = tmp & 0xffffff;
target[i].raw_data = be32_to_cpu(source[j+1]);
}
}
-static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+
+static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
{
+ const __be16 *source = (const __be16 *)_source;
+ u16 *target = (u16 *)_target;
u32 i;
- u16 *target = (u16*)_target;
- const __be16 *source = (const __be16*)_source;
for (i = 0; i < n/2; i++)
target[i] = be16_to_cpu(source[i]);
}
#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
- do { \
- u32 len = be32_to_cpu(fw_hdr->arr.len); \
- bp->arr = kmalloc(len, GFP_KERNEL); \
+ do { \
+ u32 len = be32_to_cpu(fw_hdr->arr.len); \
+ bp->arr = kmalloc(len, GFP_KERNEL); \
if (!bp->arr) { \
- printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \
+ printk(KERN_ERR PFX "Failed to allocate %d bytes " \
+ "for "#arr"\n", len); \
goto lbl; \
} \
- func(bp->firmware->data + \
- be32_to_cpu(fw_hdr->arr.offset), \
- (u8*)bp->arr, len); \
+ func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
+ (u8 *)bp->arr, len); \
} while (0)
-
static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
{
char fw_file_name[40] = {0};
- int rc, offset;
struct bnx2x_fw_file_hdr *fw_hdr;
+ int rc, offset;
/* Create a FW file name */
if (CHIP_IS_E1(bp))
- offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+ offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
else
offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
BCM_5710_FW_MAJOR_VERSION,
- BCM_5710_FW_MINOR_VERSION,
- BCM_5710_FW_REVISION_VERSION,
- BCM_5710_FW_ENGINEERING_VERSION);
+ BCM_5710_FW_MINOR_VERSION,
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_ENGINEERING_VERSION);
printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
rc = request_firmware(&bp->firmware, fw_file_name, dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name);
+ printk(KERN_ERR PFX "Can't load firmware file %s\n",
+ fw_file_name);
goto request_firmware_exit;
}
@@ -11264,27 +11871,29 @@
BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
/* Offsets */
- BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
+ BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err,
+ be16_to_cpu_n);
/* STORMs firmware */
- bp->tsem_int_table_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
- bp->tsem_pram_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->tsem_pram_data.offset);
- bp->usem_int_table_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->usem_int_table_data.offset);
- bp->usem_pram_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->usem_pram_data.offset);
- bp->xsem_int_table_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
- bp->xsem_pram_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->xsem_pram_data.offset);
- bp->csem_int_table_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->csem_int_table_data.offset);
- bp->csem_pram_data = bp->firmware->data +
- be32_to_cpu(fw_hdr->csem_pram_data.offset);
+ INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+ INIT_TSEM_PRAM_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+ INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+ INIT_USEM_PRAM_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->usem_pram_data.offset);
+ INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+ INIT_XSEM_PRAM_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+ INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+ INIT_CSEM_PRAM_DATA(bp) = bp->firmware->data +
+ be32_to_cpu(fw_hdr->csem_pram_data.offset);
return 0;
+
init_offsets_alloc_err:
kfree(bp->init_ops);
init_ops_alloc_err:
@@ -11296,18 +11905,14 @@
}
-
static int __devinit bnx2x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- static int version_printed;
struct net_device *dev = NULL;
struct bnx2x *bp;
+ int pcie_width, pcie_speed;
int rc;
- if (version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-
/* dev zeroed in init_etherdev */
dev = alloc_etherdev_mq(sizeof(*bp), MAX_CONTEXT);
if (!dev) {
@@ -11318,14 +11923,14 @@
bp = netdev_priv(dev);
bp->msglevel = debug;
+ pci_set_drvdata(pdev, dev);
+
rc = bnx2x_init_dev(pdev, dev);
if (rc < 0) {
free_netdev(dev);
return rc;
}
- pci_set_drvdata(pdev, dev);
-
rc = bnx2x_init_bp(bp);
if (rc)
goto init_one_exit;
@@ -11343,11 +11948,11 @@
goto init_one_exit;
}
+ bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
" IRQ %d, ", dev->name, board_info[ent->driver_data].name,
(CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
- bnx2x_get_pcie_width(bp),
- (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",
+ pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
dev->base_addr, bp->pdev->irq);
printk(KERN_CONT "node addr %pM\n", dev->dev_addr);
@@ -11554,6 +12159,11 @@
netif_device_detach(dev);
+ if (state == pci_channel_io_perm_failure) {
+ rtnl_unlock();
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
if (netif_running(dev))
bnx2x_eeh_nic_unload(bp);
@@ -11640,6 +12250,8 @@
{
int ret;
+ printk(KERN_INFO "%s", version);
+
bnx2x_wq = create_singlethread_workqueue("bnx2x");
if (bnx2x_wq == NULL) {
printk(KERN_ERR PFX "Cannot create workqueue\n");
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index b8ce6fc..0695be1 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -190,12 +190,6 @@
_(0..15) stands for the connection type (one of 16). */
#define CCM_REG_N_SM_CTX_LD_0 0xd004c
#define CCM_REG_N_SM_CTX_LD_1 0xd0050
-#define CCM_REG_N_SM_CTX_LD_10 0xd0074
-#define CCM_REG_N_SM_CTX_LD_11 0xd0078
-#define CCM_REG_N_SM_CTX_LD_12 0xd007c
-#define CCM_REG_N_SM_CTX_LD_13 0xd0080
-#define CCM_REG_N_SM_CTX_LD_14 0xd0084
-#define CCM_REG_N_SM_CTX_LD_15 0xd0088
#define CCM_REG_N_SM_CTX_LD_2 0xd0054
#define CCM_REG_N_SM_CTX_LD_3 0xd0058
#define CCM_REG_N_SM_CTX_LD_4 0xd005c
@@ -370,7 +364,6 @@
#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
/* [RW 8] The event id for aggregated interrupt 0 */
#define CSDM_REG_AGG_INT_EVENT_0 0xc2038
-#define CSDM_REG_AGG_INT_EVENT_1 0xc203c
#define CSDM_REG_AGG_INT_EVENT_10 0xc2060
#define CSDM_REG_AGG_INT_EVENT_11 0xc2064
#define CSDM_REG_AGG_INT_EVENT_12 0xc2068
@@ -378,37 +371,27 @@
#define CSDM_REG_AGG_INT_EVENT_14 0xc2070
#define CSDM_REG_AGG_INT_EVENT_15 0xc2074
#define CSDM_REG_AGG_INT_EVENT_16 0xc2078
-#define CSDM_REG_AGG_INT_EVENT_17 0xc207c
-#define CSDM_REG_AGG_INT_EVENT_18 0xc2080
-#define CSDM_REG_AGG_INT_EVENT_19 0xc2084
#define CSDM_REG_AGG_INT_EVENT_2 0xc2040
-#define CSDM_REG_AGG_INT_EVENT_20 0xc2088
-#define CSDM_REG_AGG_INT_EVENT_21 0xc208c
-#define CSDM_REG_AGG_INT_EVENT_22 0xc2090
-#define CSDM_REG_AGG_INT_EVENT_23 0xc2094
-#define CSDM_REG_AGG_INT_EVENT_24 0xc2098
-#define CSDM_REG_AGG_INT_EVENT_25 0xc209c
-#define CSDM_REG_AGG_INT_EVENT_26 0xc20a0
-#define CSDM_REG_AGG_INT_EVENT_27 0xc20a4
-#define CSDM_REG_AGG_INT_EVENT_28 0xc20a8
-#define CSDM_REG_AGG_INT_EVENT_29 0xc20ac
#define CSDM_REG_AGG_INT_EVENT_3 0xc2044
-#define CSDM_REG_AGG_INT_EVENT_30 0xc20b0
-#define CSDM_REG_AGG_INT_EVENT_31 0xc20b4
#define CSDM_REG_AGG_INT_EVENT_4 0xc2048
-/* [RW 1] The T bit for aggregated interrupt 0 */
-#define CSDM_REG_AGG_INT_T_0 0xc20b8
-#define CSDM_REG_AGG_INT_T_1 0xc20bc
-#define CSDM_REG_AGG_INT_T_10 0xc20e0
-#define CSDM_REG_AGG_INT_T_11 0xc20e4
-#define CSDM_REG_AGG_INT_T_12 0xc20e8
-#define CSDM_REG_AGG_INT_T_13 0xc20ec
-#define CSDM_REG_AGG_INT_T_14 0xc20f0
-#define CSDM_REG_AGG_INT_T_15 0xc20f4
-#define CSDM_REG_AGG_INT_T_16 0xc20f8
-#define CSDM_REG_AGG_INT_T_17 0xc20fc
-#define CSDM_REG_AGG_INT_T_18 0xc2100
-#define CSDM_REG_AGG_INT_T_19 0xc2104
+#define CSDM_REG_AGG_INT_EVENT_5 0xc204c
+#define CSDM_REG_AGG_INT_EVENT_6 0xc2050
+#define CSDM_REG_AGG_INT_EVENT_7 0xc2054
+#define CSDM_REG_AGG_INT_EVENT_8 0xc2058
+#define CSDM_REG_AGG_INT_EVENT_9 0xc205c
+/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
+ or auto-mask-mode (1) */
+#define CSDM_REG_AGG_INT_MODE_10 0xc21e0
+#define CSDM_REG_AGG_INT_MODE_11 0xc21e4
+#define CSDM_REG_AGG_INT_MODE_12 0xc21e8
+#define CSDM_REG_AGG_INT_MODE_13 0xc21ec
+#define CSDM_REG_AGG_INT_MODE_14 0xc21f0
+#define CSDM_REG_AGG_INT_MODE_15 0xc21f4
+#define CSDM_REG_AGG_INT_MODE_16 0xc21f8
+#define CSDM_REG_AGG_INT_MODE_6 0xc21d0
+#define CSDM_REG_AGG_INT_MODE_7 0xc21d4
+#define CSDM_REG_AGG_INT_MODE_8 0xc21d8
+#define CSDM_REG_AGG_INT_MODE_9 0xc21dc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
/* [RW 16] The maximum value of the competion counter #0 */
@@ -633,24 +616,6 @@
#define DMAE_REG_GO_C1 0x102084
/* [RW 1] Command 10 go. */
#define DMAE_REG_GO_C10 0x102088
-#define DMAE_REG_GO_C10_SIZE 1
-/* [RW 1] Command 11 go. */
-#define DMAE_REG_GO_C11 0x10208c
-#define DMAE_REG_GO_C11_SIZE 1
-/* [RW 1] Command 12 go. */
-#define DMAE_REG_GO_C12 0x102090
-#define DMAE_REG_GO_C12_SIZE 1
-/* [RW 1] Command 13 go. */
-#define DMAE_REG_GO_C13 0x102094
-#define DMAE_REG_GO_C13_SIZE 1
-/* [RW 1] Command 14 go. */
-#define DMAE_REG_GO_C14 0x102098
-#define DMAE_REG_GO_C14_SIZE 1
-/* [RW 1] Command 15 go. */
-#define DMAE_REG_GO_C15 0x10209c
-#define DMAE_REG_GO_C15_SIZE 1
-/* [RW 1] Command 10 go. */
-#define DMAE_REG_GO_C10 0x102088
/* [RW 1] Command 11 go. */
#define DMAE_REG_GO_C11 0x10208c
/* [RW 1] Command 12 go. */
@@ -800,7 +765,6 @@
#define MCP_REG_MCPR_NVM_READ 0x86410
#define MCP_REG_MCPR_NVM_SW_ARB 0x86420
#define MCP_REG_MCPR_NVM_WRITE 0x86408
-#define MCP_REG_MCPR_NVM_WRITE1 0x86428
#define MCP_REG_MCPR_SCRATCH 0xa0000
/* [R 32] read first 32 bit after inversion of function 0. mapped as
follows: [0] NIG attention for function0; [1] NIG attention for
@@ -1186,19 +1150,7 @@
#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
-#define MISC_REG_AEU_GENERAL_ATTN_13 0xa034
-#define MISC_REG_AEU_GENERAL_ATTN_14 0xa038
-#define MISC_REG_AEU_GENERAL_ATTN_15 0xa03c
-#define MISC_REG_AEU_GENERAL_ATTN_16 0xa040
-#define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
-#define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
-#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
-#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
-#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
-#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
-#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
-#define MISC_REG_AEU_GENERAL_ATTN_21 0xa054
#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
@@ -1290,137 +1242,13 @@
set. if the appropriate bit is clear (the driver request to free a client
it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
be asserted). */
-#define MISC_REG_DRIVER_CONTROL_10 0xa3e0
-#define MISC_REG_DRIVER_CONTROL_10_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_11 0xa3e8
-#define MISC_REG_DRIVER_CONTROL_11_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_12 0xa3f0
-#define MISC_REG_DRIVER_CONTROL_12_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_13 0xa3f8
-#define MISC_REG_DRIVER_CONTROL_13_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
#define MISC_REG_DRIVER_CONTROL_1 0xa510
-#define MISC_REG_DRIVER_CONTROL_14 0xa5e0
-#define MISC_REG_DRIVER_CONTROL_14_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_15 0xa5e8
-#define MISC_REG_DRIVER_CONTROL_15_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_16 0xa5f0
-#define MISC_REG_DRIVER_CONTROL_16_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
#define MISC_REG_DRIVER_CONTROL_7 0xa3c8
/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
only. */
#define MISC_REG_E1HMF_MODE 0xa5f8
+/* [RW 32] Debug only: spare RW register reset by core reset */
+#define MISC_REG_GENERIC_CR_0 0xa460
/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
these bits is written as a '1'; the corresponding SPIO bit will turn off
it's drivers and become an input. This is the reset state of all GPIO
@@ -1616,6 +1444,11 @@
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
loaded; 0-prepare; -unprepare */
#define MISC_REG_UNPREPARED 0xa424
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
@@ -1654,12 +1487,12 @@
/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
to emac for port0; other way to bmac for port0 */
#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
-/* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */
-#define NIG_REG_EGRESS_MNG0_FIFO 0x1045c
/* [RW 1] Input enable for TX PBF user packet port0 IF */
#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
/* [RW 1] Input enable for TX PBF user packet port1 IF */
#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
+/* [RW 1] Input enable for TX UMP management packet port0 IF */
+#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
/* [RW 1] Input enable for RX_EMAC0 IF */
#define NIG_REG_EMAC0_IN_EN 0x100a4
/* [RW 1] output enable for TX EMAC pause port 0 IF */
@@ -1683,6 +1516,24 @@
/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
+/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
+ logic for interrupts must be used. Enable per bit of interrupt of
+ ~latch_status.latch_status */
+#define NIG_REG_LATCH_BC_0 0x16210
+/* [RW 27] Latch for each interrupt from Unicore.b[0]
+ status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
+ b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
+ b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
+ b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
+ b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
+ b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
+ b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
+ b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
+ b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
+ b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
+ b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
+ b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */
+#define NIG_REG_LATCH_STATUS_0 0x18000
/* [RW 1] led 10g for port 0 */
#define NIG_REG_LED_10G_P0 0x10320
/* [RW 1] led 10g for port 1 */
@@ -1722,6 +1573,7 @@
/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
tsdm enable; b2- usdm enable */
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
+#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
/* [RW 1] SAFC enable for port0. This register may get 1 only when
~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
port */
@@ -1872,6 +1724,7 @@
#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
@@ -2072,6 +1925,7 @@
#define PXP2_REG_PGL_ADDR_94_F0 0x120540
#define PXP2_REG_PGL_CONTROL0 0x120490
#define PXP2_REG_PGL_CONTROL1 0x120514
+#define PXP2_REG_PGL_DEBUG 0x120520
/* [RW 32] third dword data of expansion rom request. this register is
special. reading from it provides a vector outstanding read requests. if
a bit is zero it means that a read request on the corresponding tag did
@@ -2142,11 +1996,8 @@
#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
-#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
-#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
-#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
@@ -2156,11 +2007,8 @@
#define PXP2_REG_PSWRQ_BW_L1 0x1202b0
#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
-#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
-#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
#define PXP2_REG_PSWRQ_BW_L2 0x1202b4
#define PXP2_REG_PSWRQ_BW_L28 0x120318
-#define PXP2_REG_PSWRQ_BW_L28 0x120318
#define PXP2_REG_PSWRQ_BW_L3 0x1202b8
#define PXP2_REG_PSWRQ_BW_L6 0x1202c4
#define PXP2_REG_PSWRQ_BW_L7 0x1202c8
@@ -2170,11 +2018,8 @@
#define PXP2_REG_PSWRQ_BW_UB1 0x120238
#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
#define PXP2_REG_PSWRQ_BW_UB11 0x120260
-#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
-#define PXP2_REG_PSWRQ_BW_UB11 0x120260
#define PXP2_REG_PSWRQ_BW_UB2 0x12023c
#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
-#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
#define PXP2_REG_PSWRQ_BW_UB3 0x120240
#define PXP2_REG_PSWRQ_BW_UB6 0x12024c
#define PXP2_REG_PSWRQ_BW_UB7 0x120250
@@ -2232,6 +2077,9 @@
allocated for vq22 */
#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq25 */
+#define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
allocated for vq6 */
#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
@@ -2762,16 +2610,6 @@
#define QM_REG_QVOQIDX_107 0x16e4b8
#define QM_REG_QVOQIDX_108 0x16e4bc
#define QM_REG_QVOQIDX_109 0x16e4c0
-#define QM_REG_QVOQIDX_100 0x16e49c
-#define QM_REG_QVOQIDX_101 0x16e4a0
-#define QM_REG_QVOQIDX_102 0x16e4a4
-#define QM_REG_QVOQIDX_103 0x16e4a8
-#define QM_REG_QVOQIDX_104 0x16e4ac
-#define QM_REG_QVOQIDX_105 0x16e4b0
-#define QM_REG_QVOQIDX_106 0x16e4b4
-#define QM_REG_QVOQIDX_107 0x16e4b8
-#define QM_REG_QVOQIDX_108 0x16e4bc
-#define QM_REG_QVOQIDX_109 0x16e4c0
#define QM_REG_QVOQIDX_11 0x168120
#define QM_REG_QVOQIDX_110 0x16e4c4
#define QM_REG_QVOQIDX_111 0x16e4c8
@@ -2783,16 +2621,6 @@
#define QM_REG_QVOQIDX_117 0x16e4e0
#define QM_REG_QVOQIDX_118 0x16e4e4
#define QM_REG_QVOQIDX_119 0x16e4e8
-#define QM_REG_QVOQIDX_110 0x16e4c4
-#define QM_REG_QVOQIDX_111 0x16e4c8
-#define QM_REG_QVOQIDX_112 0x16e4cc
-#define QM_REG_QVOQIDX_113 0x16e4d0
-#define QM_REG_QVOQIDX_114 0x16e4d4
-#define QM_REG_QVOQIDX_115 0x16e4d8
-#define QM_REG_QVOQIDX_116 0x16e4dc
-#define QM_REG_QVOQIDX_117 0x16e4e0
-#define QM_REG_QVOQIDX_118 0x16e4e4
-#define QM_REG_QVOQIDX_119 0x16e4e8
#define QM_REG_QVOQIDX_12 0x168124
#define QM_REG_QVOQIDX_120 0x16e4ec
#define QM_REG_QVOQIDX_121 0x16e4f0
@@ -2802,14 +2630,6 @@
#define QM_REG_QVOQIDX_125 0x16e500
#define QM_REG_QVOQIDX_126 0x16e504
#define QM_REG_QVOQIDX_127 0x16e508
-#define QM_REG_QVOQIDX_120 0x16e4ec
-#define QM_REG_QVOQIDX_121 0x16e4f0
-#define QM_REG_QVOQIDX_122 0x16e4f4
-#define QM_REG_QVOQIDX_123 0x16e4f8
-#define QM_REG_QVOQIDX_124 0x16e4fc
-#define QM_REG_QVOQIDX_125 0x16e500
-#define QM_REG_QVOQIDX_126 0x16e504
-#define QM_REG_QVOQIDX_127 0x16e508
#define QM_REG_QVOQIDX_13 0x168128
#define QM_REG_QVOQIDX_14 0x16812c
#define QM_REG_QVOQIDX_15 0x168130
@@ -2855,16 +2675,6 @@
#define QM_REG_QVOQIDX_57 0x1681d8
#define QM_REG_QVOQIDX_58 0x1681dc
#define QM_REG_QVOQIDX_59 0x1681e0
-#define QM_REG_QVOQIDX_50 0x1681bc
-#define QM_REG_QVOQIDX_51 0x1681c0
-#define QM_REG_QVOQIDX_52 0x1681c4
-#define QM_REG_QVOQIDX_53 0x1681c8
-#define QM_REG_QVOQIDX_54 0x1681cc
-#define QM_REG_QVOQIDX_55 0x1681d0
-#define QM_REG_QVOQIDX_56 0x1681d4
-#define QM_REG_QVOQIDX_57 0x1681d8
-#define QM_REG_QVOQIDX_58 0x1681dc
-#define QM_REG_QVOQIDX_59 0x1681e0
#define QM_REG_QVOQIDX_6 0x16810c
#define QM_REG_QVOQIDX_60 0x1681e4
#define QM_REG_QVOQIDX_61 0x1681e8
@@ -2872,16 +2682,6 @@
#define QM_REG_QVOQIDX_63 0x1681f0
#define QM_REG_QVOQIDX_64 0x16e40c
#define QM_REG_QVOQIDX_65 0x16e410
-#define QM_REG_QVOQIDX_66 0x16e414
-#define QM_REG_QVOQIDX_67 0x16e418
-#define QM_REG_QVOQIDX_68 0x16e41c
-#define QM_REG_QVOQIDX_69 0x16e420
-#define QM_REG_QVOQIDX_60 0x1681e4
-#define QM_REG_QVOQIDX_61 0x1681e8
-#define QM_REG_QVOQIDX_62 0x1681ec
-#define QM_REG_QVOQIDX_63 0x1681f0
-#define QM_REG_QVOQIDX_64 0x16e40c
-#define QM_REG_QVOQIDX_65 0x16e410
#define QM_REG_QVOQIDX_69 0x16e420
#define QM_REG_QVOQIDX_7 0x168110
#define QM_REG_QVOQIDX_70 0x16e424
@@ -2894,29 +2694,9 @@
#define QM_REG_QVOQIDX_77 0x16e440
#define QM_REG_QVOQIDX_78 0x16e444
#define QM_REG_QVOQIDX_79 0x16e448
-#define QM_REG_QVOQIDX_70 0x16e424
-#define QM_REG_QVOQIDX_71 0x16e428
-#define QM_REG_QVOQIDX_72 0x16e42c
-#define QM_REG_QVOQIDX_73 0x16e430
-#define QM_REG_QVOQIDX_74 0x16e434
-#define QM_REG_QVOQIDX_75 0x16e438
-#define QM_REG_QVOQIDX_76 0x16e43c
-#define QM_REG_QVOQIDX_77 0x16e440
-#define QM_REG_QVOQIDX_78 0x16e444
-#define QM_REG_QVOQIDX_79 0x16e448
#define QM_REG_QVOQIDX_8 0x168114
#define QM_REG_QVOQIDX_80 0x16e44c
#define QM_REG_QVOQIDX_81 0x16e450
-#define QM_REG_QVOQIDX_82 0x16e454
-#define QM_REG_QVOQIDX_83 0x16e458
-#define QM_REG_QVOQIDX_84 0x16e45c
-#define QM_REG_QVOQIDX_85 0x16e460
-#define QM_REG_QVOQIDX_86 0x16e464
-#define QM_REG_QVOQIDX_87 0x16e468
-#define QM_REG_QVOQIDX_88 0x16e46c
-#define QM_REG_QVOQIDX_89 0x16e470
-#define QM_REG_QVOQIDX_80 0x16e44c
-#define QM_REG_QVOQIDX_81 0x16e450
#define QM_REG_QVOQIDX_85 0x16e460
#define QM_REG_QVOQIDX_86 0x16e464
#define QM_REG_QVOQIDX_87 0x16e468
@@ -2933,23 +2713,11 @@
#define QM_REG_QVOQIDX_97 0x16e490
#define QM_REG_QVOQIDX_98 0x16e494
#define QM_REG_QVOQIDX_99 0x16e498
-#define QM_REG_QVOQIDX_90 0x16e474
-#define QM_REG_QVOQIDX_91 0x16e478
-#define QM_REG_QVOQIDX_92 0x16e47c
-#define QM_REG_QVOQIDX_93 0x16e480
-#define QM_REG_QVOQIDX_94 0x16e484
-#define QM_REG_QVOQIDX_95 0x16e488
-#define QM_REG_QVOQIDX_96 0x16e48c
-#define QM_REG_QVOQIDX_97 0x16e490
-#define QM_REG_QVOQIDX_98 0x16e494
-#define QM_REG_QVOQIDX_99 0x16e498
/* [RW 1] Initialization bit command */
#define QM_REG_SOFT_RESET 0x168428
/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
#define QM_REG_TASKCRDCOST_0 0x16809c
#define QM_REG_TASKCRDCOST_1 0x1680a0
-#define QM_REG_TASKCRDCOST_10 0x1680c4
-#define QM_REG_TASKCRDCOST_11 0x1680c8
#define QM_REG_TASKCRDCOST_2 0x1680a4
#define QM_REG_TASKCRDCOST_4 0x1680ac
#define QM_REG_TASKCRDCOST_5 0x1680b0
@@ -2962,24 +2730,18 @@
/* [R 16] The credit value for each VOQ */
#define QM_REG_VOQCREDIT_0 0x1682d0
#define QM_REG_VOQCREDIT_1 0x1682d4
-#define QM_REG_VOQCREDIT_10 0x1682f8
-#define QM_REG_VOQCREDIT_11 0x1682fc
#define QM_REG_VOQCREDIT_4 0x1682e0
/* [RW 16] The credit value that if above the QM is considered almost full */
#define QM_REG_VOQCREDITAFULLTHR 0x168090
/* [RW 16] The init and maximum credit for each VoQ */
#define QM_REG_VOQINITCREDIT_0 0x168060
#define QM_REG_VOQINITCREDIT_1 0x168064
-#define QM_REG_VOQINITCREDIT_10 0x168088
-#define QM_REG_VOQINITCREDIT_11 0x16808c
#define QM_REG_VOQINITCREDIT_2 0x168068
#define QM_REG_VOQINITCREDIT_4 0x168070
#define QM_REG_VOQINITCREDIT_5 0x168074
/* [RW 1] The port of which VOQ belongs */
#define QM_REG_VOQPORT_0 0x1682a0
#define QM_REG_VOQPORT_1 0x1682a4
-#define QM_REG_VOQPORT_10 0x1682c8
-#define QM_REG_VOQPORT_11 0x1682cc
#define QM_REG_VOQPORT_2 0x1682a8
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_0_LSB 0x168240
@@ -3077,36 +2839,6 @@
#define QM_REG_WRRWEIGHTS_0 0x16880c
#define QM_REG_WRRWEIGHTS_1 0x168810
#define QM_REG_WRRWEIGHTS_10 0x168814
-#define QM_REG_WRRWEIGHTS_10_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_11 0x168818
-#define QM_REG_WRRWEIGHTS_11_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_12 0x16881c
-#define QM_REG_WRRWEIGHTS_12_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_13 0x168820
-#define QM_REG_WRRWEIGHTS_13_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_14 0x168824
-#define QM_REG_WRRWEIGHTS_14_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_15 0x168828
-#define QM_REG_WRRWEIGHTS_15_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_16 0x16e000
-#define QM_REG_WRRWEIGHTS_16_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_17 0x16e004
-#define QM_REG_WRRWEIGHTS_17_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_18 0x16e008
-#define QM_REG_WRRWEIGHTS_18_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_19 0x16e00c
-#define QM_REG_WRRWEIGHTS_19_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_10 0x168814
#define QM_REG_WRRWEIGHTS_11 0x168818
#define QM_REG_WRRWEIGHTS_12 0x16881c
#define QM_REG_WRRWEIGHTS_13 0x168820
@@ -3118,36 +2850,6 @@
#define QM_REG_WRRWEIGHTS_19 0x16e00c
#define QM_REG_WRRWEIGHTS_2 0x16882c
#define QM_REG_WRRWEIGHTS_20 0x16e010
-#define QM_REG_WRRWEIGHTS_20_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_21 0x16e014
-#define QM_REG_WRRWEIGHTS_21_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_22 0x16e018
-#define QM_REG_WRRWEIGHTS_22_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_23 0x16e01c
-#define QM_REG_WRRWEIGHTS_23_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_24 0x16e020
-#define QM_REG_WRRWEIGHTS_24_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_25 0x16e024
-#define QM_REG_WRRWEIGHTS_25_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_26 0x16e028
-#define QM_REG_WRRWEIGHTS_26_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_27 0x16e02c
-#define QM_REG_WRRWEIGHTS_27_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_28 0x16e030
-#define QM_REG_WRRWEIGHTS_28_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_29 0x16e034
-#define QM_REG_WRRWEIGHTS_29_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_20 0x16e010
#define QM_REG_WRRWEIGHTS_21 0x16e014
#define QM_REG_WRRWEIGHTS_22 0x16e018
#define QM_REG_WRRWEIGHTS_23 0x16e01c
@@ -3159,12 +2861,6 @@
#define QM_REG_WRRWEIGHTS_29 0x16e034
#define QM_REG_WRRWEIGHTS_3 0x168830
#define QM_REG_WRRWEIGHTS_30 0x16e038
-#define QM_REG_WRRWEIGHTS_30_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_31 0x16e03c
-#define QM_REG_WRRWEIGHTS_31_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_30 0x16e038
#define QM_REG_WRRWEIGHTS_31 0x16e03c
#define QM_REG_WRRWEIGHTS_4 0x168834
#define QM_REG_WRRWEIGHTS_5 0x168838
@@ -3174,362 +2870,6 @@
#define QM_REG_WRRWEIGHTS_9 0x168848
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
-#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
-#define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
-/* [R 1] debug only: This bit indicates whether indicates that external
- buffer was wrapped (oldest data was thrown); Relevant only when
- ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
-#define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124
-#define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1
-/* [R 1] debug only: This bit indicates whether the internal buffer was
- wrapped (oldest data was thrown) Relevant only when
- ~dbg_registers_debug_target=0 (internal buffer) */
-#define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
-#define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1
-#define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8
-#define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8
-#define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8
-#define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_0 0x16880c
-#define QM_REG_WRRWEIGHTS_0_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_1 0x168810
-#define QM_REG_WRRWEIGHTS_1_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_10 0x168814
-#define QM_REG_WRRWEIGHTS_10_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_11 0x168818
-#define QM_REG_WRRWEIGHTS_11_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_12 0x16881c
-#define QM_REG_WRRWEIGHTS_12_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_13 0x168820
-#define QM_REG_WRRWEIGHTS_13_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_14 0x168824
-#define QM_REG_WRRWEIGHTS_14_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_15 0x168828
-#define QM_REG_WRRWEIGHTS_15_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_2 0x16882c
-#define QM_REG_WRRWEIGHTS_2_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_3 0x168830
-#define QM_REG_WRRWEIGHTS_3_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_4 0x168834
-#define QM_REG_WRRWEIGHTS_4_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_5 0x168838
-#define QM_REG_WRRWEIGHTS_5_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_6 0x16883c
-#define QM_REG_WRRWEIGHTS_6_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_7 0x168840
-#define QM_REG_WRRWEIGHTS_7_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_8 0x168844
-#define QM_REG_WRRWEIGHTS_8_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_9 0x168848
-#define QM_REG_WRRWEIGHTS_9_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_16 0x16e000
-#define QM_REG_WRRWEIGHTS_16_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_17 0x16e004
-#define QM_REG_WRRWEIGHTS_17_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_18 0x16e008
-#define QM_REG_WRRWEIGHTS_18_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_19 0x16e00c
-#define QM_REG_WRRWEIGHTS_19_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_20 0x16e010
-#define QM_REG_WRRWEIGHTS_20_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_21 0x16e014
-#define QM_REG_WRRWEIGHTS_21_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_22 0x16e018
-#define QM_REG_WRRWEIGHTS_22_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_23 0x16e01c
-#define QM_REG_WRRWEIGHTS_23_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_24 0x16e020
-#define QM_REG_WRRWEIGHTS_24_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_25 0x16e024
-#define QM_REG_WRRWEIGHTS_25_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_26 0x16e028
-#define QM_REG_WRRWEIGHTS_26_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_27 0x16e02c
-#define QM_REG_WRRWEIGHTS_27_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_28 0x16e030
-#define QM_REG_WRRWEIGHTS_28_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_29 0x16e034
-#define QM_REG_WRRWEIGHTS_29_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_30 0x16e038
-#define QM_REG_WRRWEIGHTS_30_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_31 0x16e03c
-#define QM_REG_WRRWEIGHTS_31_SIZE 1
#define SRC_REG_COUNTFREE0 0x40500
/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
ports. If set the searcher support 8 functions. */
@@ -3629,12 +2969,6 @@
type (one of 16). */
#define TCM_REG_N_SM_CTX_LD_0 0x50050
#define TCM_REG_N_SM_CTX_LD_1 0x50054
-#define TCM_REG_N_SM_CTX_LD_10 0x50078
-#define TCM_REG_N_SM_CTX_LD_11 0x5007c
-#define TCM_REG_N_SM_CTX_LD_12 0x50080
-#define TCM_REG_N_SM_CTX_LD_13 0x50084
-#define TCM_REG_N_SM_CTX_LD_14 0x50088
-#define TCM_REG_N_SM_CTX_LD_15 0x5008c
#define TCM_REG_N_SM_CTX_LD_2 0x50058
#define TCM_REG_N_SM_CTX_LD_3 0x5005c
#define TCM_REG_N_SM_CTX_LD_4 0x50060
@@ -3828,6 +3162,7 @@
#define TM_REG_LIN0_PHY_ADDR 0x164270
/* [RW 1] Linear0 physical address valid. */
#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
+#define TM_REG_LIN0_SCAN_ON 0x1640d0
/* [RW 24] Linear0 array scan timeout. */
#define TM_REG_LIN0_SCAN_TIME 0x16403c
/* [RW 32] Linear1 logic address. */
@@ -3840,8 +3175,6 @@
#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
/* [RW 2] Load value for pci arbiter credit cnt. */
#define TM_REG_PCIARB_CRDCNT_VAL 0x164260
-/* [RW 1] Timer software reset - active high. */
-#define TM_REG_TIMER_SOFT_RST 0x164004
/* [RW 20] The amount of hardware cycles for each timer tick. */
#define TM_REG_TIMER_TICK_SIZE 0x16401c
/* [RW 8] Timers Context region. */
@@ -3853,44 +3186,12 @@
/* [RW 8] The event id for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
#define TSDM_REG_AGG_INT_EVENT_1 0x4203c
-#define TSDM_REG_AGG_INT_EVENT_10 0x42060
-#define TSDM_REG_AGG_INT_EVENT_11 0x42064
-#define TSDM_REG_AGG_INT_EVENT_12 0x42068
-#define TSDM_REG_AGG_INT_EVENT_13 0x4206c
-#define TSDM_REG_AGG_INT_EVENT_14 0x42070
-#define TSDM_REG_AGG_INT_EVENT_15 0x42074
-#define TSDM_REG_AGG_INT_EVENT_16 0x42078
-#define TSDM_REG_AGG_INT_EVENT_17 0x4207c
-#define TSDM_REG_AGG_INT_EVENT_18 0x42080
-#define TSDM_REG_AGG_INT_EVENT_19 0x42084
#define TSDM_REG_AGG_INT_EVENT_2 0x42040
-#define TSDM_REG_AGG_INT_EVENT_20 0x42088
-#define TSDM_REG_AGG_INT_EVENT_21 0x4208c
-#define TSDM_REG_AGG_INT_EVENT_22 0x42090
-#define TSDM_REG_AGG_INT_EVENT_23 0x42094
-#define TSDM_REG_AGG_INT_EVENT_24 0x42098
-#define TSDM_REG_AGG_INT_EVENT_25 0x4209c
-#define TSDM_REG_AGG_INT_EVENT_26 0x420a0
-#define TSDM_REG_AGG_INT_EVENT_27 0x420a4
-#define TSDM_REG_AGG_INT_EVENT_28 0x420a8
-#define TSDM_REG_AGG_INT_EVENT_29 0x420ac
#define TSDM_REG_AGG_INT_EVENT_3 0x42044
-#define TSDM_REG_AGG_INT_EVENT_30 0x420b0
-#define TSDM_REG_AGG_INT_EVENT_31 0x420b4
#define TSDM_REG_AGG_INT_EVENT_4 0x42048
/* [RW 1] The T bit for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_T_0 0x420b8
#define TSDM_REG_AGG_INT_T_1 0x420bc
-#define TSDM_REG_AGG_INT_T_10 0x420e0
-#define TSDM_REG_AGG_INT_T_11 0x420e4
-#define TSDM_REG_AGG_INT_T_12 0x420e8
-#define TSDM_REG_AGG_INT_T_13 0x420ec
-#define TSDM_REG_AGG_INT_T_14 0x420f0
-#define TSDM_REG_AGG_INT_T_15 0x420f4
-#define TSDM_REG_AGG_INT_T_16 0x420f8
-#define TSDM_REG_AGG_INT_T_17 0x420fc
-#define TSDM_REG_AGG_INT_T_18 0x42100
-#define TSDM_REG_AGG_INT_T_19 0x42104
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
/* [RW 16] The maximum value of the competion counter #0 */
@@ -4175,12 +3476,6 @@
connection type (one of 16). */
#define UCM_REG_N_SM_CTX_LD_0 0xe0054
#define UCM_REG_N_SM_CTX_LD_1 0xe0058
-#define UCM_REG_N_SM_CTX_LD_10 0xe007c
-#define UCM_REG_N_SM_CTX_LD_11 0xe0080
-#define UCM_REG_N_SM_CTX_LD_12 0xe0084
-#define UCM_REG_N_SM_CTX_LD_13 0xe0088
-#define UCM_REG_N_SM_CTX_LD_14 0xe008c
-#define UCM_REG_N_SM_CTX_LD_15 0xe0090
#define UCM_REG_N_SM_CTX_LD_2 0xe005c
#define UCM_REG_N_SM_CTX_LD_3 0xe0060
#define UCM_REG_N_SM_CTX_LD_4 0xe0064
@@ -4330,48 +3625,20 @@
/* [RW 8] The event id for aggregated interrupt 0 */
#define USDM_REG_AGG_INT_EVENT_0 0xc4038
#define USDM_REG_AGG_INT_EVENT_1 0xc403c
-#define USDM_REG_AGG_INT_EVENT_10 0xc4060
-#define USDM_REG_AGG_INT_EVENT_11 0xc4064
-#define USDM_REG_AGG_INT_EVENT_12 0xc4068
-#define USDM_REG_AGG_INT_EVENT_13 0xc406c
-#define USDM_REG_AGG_INT_EVENT_14 0xc4070
-#define USDM_REG_AGG_INT_EVENT_15 0xc4074
-#define USDM_REG_AGG_INT_EVENT_16 0xc4078
-#define USDM_REG_AGG_INT_EVENT_17 0xc407c
-#define USDM_REG_AGG_INT_EVENT_18 0xc4080
-#define USDM_REG_AGG_INT_EVENT_19 0xc4084
#define USDM_REG_AGG_INT_EVENT_2 0xc4040
-#define USDM_REG_AGG_INT_EVENT_20 0xc4088
-#define USDM_REG_AGG_INT_EVENT_21 0xc408c
-#define USDM_REG_AGG_INT_EVENT_22 0xc4090
-#define USDM_REG_AGG_INT_EVENT_23 0xc4094
-#define USDM_REG_AGG_INT_EVENT_24 0xc4098
-#define USDM_REG_AGG_INT_EVENT_25 0xc409c
-#define USDM_REG_AGG_INT_EVENT_26 0xc40a0
-#define USDM_REG_AGG_INT_EVENT_27 0xc40a4
-#define USDM_REG_AGG_INT_EVENT_28 0xc40a8
-#define USDM_REG_AGG_INT_EVENT_29 0xc40ac
-#define USDM_REG_AGG_INT_EVENT_3 0xc4044
-#define USDM_REG_AGG_INT_EVENT_30 0xc40b0
-#define USDM_REG_AGG_INT_EVENT_31 0xc40b4
#define USDM_REG_AGG_INT_EVENT_4 0xc4048
#define USDM_REG_AGG_INT_EVENT_5 0xc404c
+#define USDM_REG_AGG_INT_EVENT_6 0xc4050
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
or auto-mask-mode (1) */
#define USDM_REG_AGG_INT_MODE_0 0xc41b8
#define USDM_REG_AGG_INT_MODE_1 0xc41bc
-#define USDM_REG_AGG_INT_MODE_10 0xc41e0
-#define USDM_REG_AGG_INT_MODE_11 0xc41e4
-#define USDM_REG_AGG_INT_MODE_12 0xc41e8
-#define USDM_REG_AGG_INT_MODE_13 0xc41ec
-#define USDM_REG_AGG_INT_MODE_14 0xc41f0
-#define USDM_REG_AGG_INT_MODE_15 0xc41f4
-#define USDM_REG_AGG_INT_MODE_16 0xc41f8
-#define USDM_REG_AGG_INT_MODE_17 0xc41fc
-#define USDM_REG_AGG_INT_MODE_18 0xc4200
-#define USDM_REG_AGG_INT_MODE_19 0xc4204
#define USDM_REG_AGG_INT_MODE_4 0xc41c8
#define USDM_REG_AGG_INT_MODE_5 0xc41cc
+#define USDM_REG_AGG_INT_MODE_6 0xc41d0
+/* [RW 1] The T bit for aggregated interrupt 5 */
+#define USDM_REG_AGG_INT_T_5 0xc40cc
+#define USDM_REG_AGG_INT_T_6 0xc40d0
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define USDM_REG_CFC_RSP_START_ADDR 0xc4008
/* [RW 16] The maximum value of the competion counter #0 */
@@ -4675,10 +3942,6 @@
/* [RC 1] Set at message length mismatch (relative to last indication) at
the nig1 interface. */
#define XCM_REG_NIG1_LENGTH_MIS 0x2023c
-/* [RW 3] The weight of the input nig1 in the WRR mechanism. 0 stands for
- weight 8 (the most prioritised); 1 stands for weight 1(least
- prioritised); 2 stands for weight 2; tc. */
-#define XCM_REG_NIG1_WEIGHT 0x200d8
/* [RW 5] The number of double REG-pairs; loaded from the STORM context and
sent to STORM; for a specific connection type. The double REG-pairs are
used in order to align to STORM context row size of 128 bits. The offset
@@ -4686,12 +3949,6 @@
connection type (one of 16). */
#define XCM_REG_N_SM_CTX_LD_0 0x20060
#define XCM_REG_N_SM_CTX_LD_1 0x20064
-#define XCM_REG_N_SM_CTX_LD_10 0x20088
-#define XCM_REG_N_SM_CTX_LD_11 0x2008c
-#define XCM_REG_N_SM_CTX_LD_12 0x20090
-#define XCM_REG_N_SM_CTX_LD_13 0x20094
-#define XCM_REG_N_SM_CTX_LD_14 0x20098
-#define XCM_REG_N_SM_CTX_LD_15 0x2009c
#define XCM_REG_N_SM_CTX_LD_2 0x20068
#define XCM_REG_N_SM_CTX_LD_3 0x2006c
#define XCM_REG_N_SM_CTX_LD_4 0x20070
@@ -4868,30 +4125,8 @@
#define XSDM_REG_AGG_INT_EVENT_12 0x166068
#define XSDM_REG_AGG_INT_EVENT_13 0x16606c
#define XSDM_REG_AGG_INT_EVENT_14 0x166070
-#define XSDM_REG_AGG_INT_EVENT_15 0x166074
-#define XSDM_REG_AGG_INT_EVENT_16 0x166078
-#define XSDM_REG_AGG_INT_EVENT_17 0x16607c
-#define XSDM_REG_AGG_INT_EVENT_18 0x166080
-#define XSDM_REG_AGG_INT_EVENT_19 0x166084
-#define XSDM_REG_AGG_INT_EVENT_10 0x166060
-#define XSDM_REG_AGG_INT_EVENT_11 0x166064
-#define XSDM_REG_AGG_INT_EVENT_12 0x166068
-#define XSDM_REG_AGG_INT_EVENT_13 0x16606c
-#define XSDM_REG_AGG_INT_EVENT_14 0x166070
#define XSDM_REG_AGG_INT_EVENT_2 0x166040
-#define XSDM_REG_AGG_INT_EVENT_20 0x166088
-#define XSDM_REG_AGG_INT_EVENT_21 0x16608c
-#define XSDM_REG_AGG_INT_EVENT_22 0x166090
-#define XSDM_REG_AGG_INT_EVENT_23 0x166094
-#define XSDM_REG_AGG_INT_EVENT_24 0x166098
-#define XSDM_REG_AGG_INT_EVENT_25 0x16609c
-#define XSDM_REG_AGG_INT_EVENT_26 0x1660a0
-#define XSDM_REG_AGG_INT_EVENT_27 0x1660a4
-#define XSDM_REG_AGG_INT_EVENT_28 0x1660a8
-#define XSDM_REG_AGG_INT_EVENT_29 0x1660ac
#define XSDM_REG_AGG_INT_EVENT_3 0x166044
-#define XSDM_REG_AGG_INT_EVENT_30 0x1660b0
-#define XSDM_REG_AGG_INT_EVENT_31 0x1660b4
#define XSDM_REG_AGG_INT_EVENT_4 0x166048
#define XSDM_REG_AGG_INT_EVENT_5 0x16604c
#define XSDM_REG_AGG_INT_EVENT_6 0x166050
@@ -4902,16 +4137,6 @@
or auto-mask-mode (1) */
#define XSDM_REG_AGG_INT_MODE_0 0x1661b8
#define XSDM_REG_AGG_INT_MODE_1 0x1661bc
-#define XSDM_REG_AGG_INT_MODE_10 0x1661e0
-#define XSDM_REG_AGG_INT_MODE_11 0x1661e4
-#define XSDM_REG_AGG_INT_MODE_12 0x1661e8
-#define XSDM_REG_AGG_INT_MODE_13 0x1661ec
-#define XSDM_REG_AGG_INT_MODE_14 0x1661f0
-#define XSDM_REG_AGG_INT_MODE_15 0x1661f4
-#define XSDM_REG_AGG_INT_MODE_16 0x1661f8
-#define XSDM_REG_AGG_INT_MODE_17 0x1661fc
-#define XSDM_REG_AGG_INT_MODE_18 0x166200
-#define XSDM_REG_AGG_INT_MODE_19 0x166204
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define XSDM_REG_CFC_RSP_START_ADDR 0x166008
/* [RW 16] The maximum value of the competion counter #0 */
@@ -5119,10 +4344,6 @@
#define MCPR_NVM_COMMAND_FIRST (1L<<7)
#define MCPR_NVM_COMMAND_LAST (1L<<8)
#define MCPR_NVM_COMMAND_WR (1L<<5)
-#define MCPR_NVM_COMMAND_WREN (1L<<16)
-#define MCPR_NVM_COMMAND_WREN_BITSHIFT 16
-#define MCPR_NVM_COMMAND_WRDI (1L<<17)
-#define MCPR_NVM_COMMAND_WRDI_BITSHIFT 17
#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
@@ -5223,10 +4444,6 @@
#define MISC_REGISTERS_SPIO_7 7
#define MISC_REGISTERS_SPIO_CLR_POS 16
#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
-#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000
-#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000
-#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000
-#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000
#define MISC_REGISTERS_SPIO_FLOAT_POS 24
#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
@@ -5344,7 +4561,8 @@
#define LATCHED_ATTN_SCPAD_PARITY_MCP 33
#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
-#define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32))
+#define GENERAL_ATTEN_OFFSET(atten_name)\
+ (1UL << ((94 + atten_name) % 32))
/*
* This file defines GRC base address for every block.
* This file is included by chipsim, asm microcode and cpp microcode.
@@ -5568,6 +4786,9 @@
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
#define MDIO_REG_BANK_RX0 0x80b0
+#define MDIO_RX0_RX_STATUS 0x10
+#define MDIO_RX0_RX_STATUS_SIGDET 0x8000
+#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
#define MDIO_RX0_RX_EQ_BOOST 0x1c
#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
@@ -5761,12 +4982,22 @@
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
#define MDIO_OVER_1G_LP_UP3 0x1E
+#define MDIO_REG_BANK_REMOTE_PHY 0x8330
+#define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10
+#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010
+#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600
+
#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
#define MDIO_REG_BANK_CL73_USERB0 0x8370
+#define MDIO_CL73_USERB0_CL73_UCTRL 0x10
+#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002
+#define MDIO_CL73_USERB0_CL73_USTAT1 0x11
+#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100
+#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
@@ -5843,25 +5074,33 @@
#define MDIO_PMA_REG_ROM_VER2 0xca1a
#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
-#define MDIO_PMA_REG_GEN_CTRL2 0xca1e
+#define MDIO_PMA_REG_PLL_CTRL 0xca1e
#define MDIO_PMA_REG_MISC_CTRL0 0xca23
#define MDIO_PMA_REG_LRM_MODE 0xca3f
#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
#define MDIO_PMA_REG_MISC_CTRL1 0xca85
-#define MDIO_PMA_REG_8726_TWO_WIRE_CTRL 0x8000
-#define MDIO_PMA_REG_8726_TWO_WIRE_CTRL_STATUS_MASK 0x000c
-#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IDLE 0x0000
-#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_COMPLETE 0x0004
-#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
-#define MDIO_PMA_REG_8726_TWO_WIRE_STATUS_FAILED 0x000c
-#define MDIO_PMA_REG_8726_TWO_WIRE_BYTE_CNT 0x8002
-#define MDIO_PMA_REG_8726_TWO_WIRE_MEM_ADDR 0x8003
+#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
+#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
+#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
+#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
+#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
+#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
+#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
+#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309
+#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
+#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
+#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
+#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
@@ -5872,6 +5111,13 @@
#define MDIO_PMA_REG_7101_VER1 0xc026
#define MDIO_PMA_REG_7101_VER2 0xc027
+#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811
+#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c
+#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f
+#define MDIO_PMA_REG_8481_LED3_MASK 0xa832
+#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835
+#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b
+
#define MDIO_WIS_DEVAD 0x2
/*bcm*/
@@ -5925,6 +5171,12 @@
#define MDIO_AN_REG_8073_2_5G 0x8329
+#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
+#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
+#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
+#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
+#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
+#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
#define IGU_FUNC_BASE 0x0400
@@ -5957,3 +5209,116 @@
#define COMMAND_REG_SIMD_NOMASK 0x1c
+#define IGU_MEM_BASE 0x0000
+
+#define IGU_MEM_MSIX_BASE 0x0000
+#define IGU_MEM_MSIX_UPPER 0x007f
+#define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff
+
+#define IGU_MEM_PBA_MSIX_BASE 0x0200
+#define IGU_MEM_PBA_MSIX_UPPER 0x0200
+
+#define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201
+#define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff
+
+#define IGU_CMD_INT_ACK_BASE 0x0400
+#define IGU_CMD_INT_ACK_UPPER\
+ (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
+#define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff
+
+#define IGU_CMD_E2_PROD_UPD_BASE 0x0500
+#define IGU_CMD_E2_PROD_UPD_UPPER\
+ (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
+#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f
+
+#define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0
+#define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1
+#define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2
+
+#define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3
+#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4
+#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5
+#define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6
+
+#define IGU_REG_RESERVED_UPPER 0x05ff
+
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+
+/**
+ * String-to-compress [31:8] = CID (all 24 bits)
+ * String-to-compress [7:4] = Region
+ * String-to-compress [3:0] = Type
+ */
+#define CDU_VALID_DATA(_cid, _region, _type)\
+ (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
+#define CDU_CRC8(_cid, _region, _type)\
+ (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
+#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
+ (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
+#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
+ (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
+#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
+
+/******************************************************************************
+ * Description:
+ * Calculates crc 8 on a word value: polynomial 0-1-2-8
+ * Code was translated from Verilog.
+ * Return:
+ *****************************************************************************/
+static inline u8 calc_crc8(u32 data, u8 crc)
+{
+ u8 D[32];
+ u8 NewCRC[8];
+ u8 C[8];
+ u8 crc_res;
+ u8 i;
+
+ /* split the data into 31 bits */
+ for (i = 0; i < 32; i++) {
+ D[i] = (u8)(data & 1);
+ data = data >> 1;
+ }
+
+ /* split the crc into 8 bits */
+ for (i = 0; i < 8; i++) {
+ C[i] = crc & 1;
+ crc = crc >> 1;
+ }
+
+ NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+ D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+ C[6] ^ C[7];
+ NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+ D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+ D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
+ C[6];
+ NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+ D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+ C[0] ^ C[1] ^ C[4] ^ C[5];
+ NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+ D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+ C[1] ^ C[2] ^ C[5] ^ C[6];
+ NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+ D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+ C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+ NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+ D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+ C[3] ^ C[4] ^ C[7];
+ NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+ D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+ C[5];
+ NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+ D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+ C[6];
+
+ crc_res = 0;
+ for (i = 0; i < 8; i++)
+ crc_res |= (NewCRC[i] << i);
+
+ return crc_res;
+}
+
+
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index d4b5708..cea5cfe 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1109,7 +1109,8 @@
//mux machine in case of EXPIRED even if LINK_DOWN didn't arrive for the port.
port->partner_oper.port_state &= ~AD_STATE_SYNCHRONIZATION;
port->sm_vars &= ~AD_PORT_MATCHED;
- port->partner_oper.port_state |= AD_SHORT_TIMEOUT;
+ port->partner_oper.port_state |=
+ AD_STATE_LACP_ACTIVITY;
port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT));
port->actor_oper_port_state |= AD_STATE_EXPIRED;
break;
@@ -1123,7 +1124,7 @@
// detect loopback situation
if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
// INFO_RECEIVED_LOOPBACK_FRAMES
- printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on "
+ pr_err(DRV_NAME ": %s: An illegal loopback occurred on "
"adapter (%s). Check the configuration to verify that all "
"Adapters are connected to 802.3ad compliant switch ports\n",
port->slave->dev->master->name, port->slave->dev->name);
@@ -1305,11 +1306,13 @@
}
}
if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
- printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was "
- "related to aggregator %d but was not on its port list\n",
- port->slave->dev->master->name,
- port->actor_port_number, port->slave->dev->name,
- port->aggregator->aggregator_identifier);
+ pr_warning(DRV_NAME ": %s: Warning: Port %d (on %s) "
+ "was related to aggregator %d but was not "
+ "on its port list\n",
+ port->slave->dev->master->name,
+ port->actor_port_number,
+ port->slave->dev->name,
+ port->aggregator->aggregator_identifier);
}
}
// search on all aggregators for a suitable aggregator for this port
@@ -1378,7 +1381,8 @@
pr_debug("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
} else {
- printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n",
+ pr_err(DRV_NAME ": %s: Port %d (on %s) did not find "
+ "a suitable aggregator\n",
port->slave->dev->master->name,
port->actor_port_number, port->slave->dev->name);
}
@@ -1455,10 +1459,10 @@
break;
default:
- printk(KERN_WARNING DRV_NAME
- ": %s: Impossible agg select mode %d\n",
- curr->slave->dev->master->name,
- __get_agg_selection_mode(curr->lag_ports));
+ pr_warning(DRV_NAME
+ ": %s: Impossible agg select mode %d\n",
+ curr->slave->dev->master->name,
+ __get_agg_selection_mode(curr->lag_ports));
break;
}
@@ -1561,7 +1565,7 @@
// check if any partner replys
if (best->is_individual) {
- printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad"
+ pr_warning(DRV_NAME ": %s: Warning: No 802.3ad"
" response from the link partner for any"
" adapters in the bond\n",
best->slave->dev->master->name);
@@ -1884,7 +1888,8 @@
struct aggregator *aggregator;
if (bond == NULL) {
- printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n",
+ pr_err(DRV_NAME ": %s: The slave %s is not attached to "
+ "its bond\n",
slave->dev->master->name, slave->dev->name);
return -1;
}
@@ -1960,9 +1965,9 @@
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to "
- "unbind an uninitialized port on %s\n",
- slave->dev->master->name, slave->dev->name);
+ pr_warning(DRV_NAME ": Warning: %s: Trying to "
+ "unbind an uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -1993,8 +1998,8 @@
pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier);
if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
- printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
- aggregator->slave->dev->master->name);
+ pr_info(DRV_NAME ": %s: Removing an active aggregator\n",
+ aggregator->slave->dev->master->name);
// select new active aggregator
select_new_active_agg = 1;
}
@@ -2024,17 +2029,17 @@
ad_agg_selection_logic(__get_first_agg(port));
}
} else {
- printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, "
- "and could not find a new aggregator for its ports\n",
- slave->dev->master->name);
+ pr_warning(DRV_NAME ": %s: Warning: unbinding aggregator, "
+ "and could not find a new aggregator for its ports\n",
+ slave->dev->master->name);
}
} else { // in case that the only port related to this aggregator is the one we want to remove
select_new_active_agg = aggregator->is_active;
// clear the aggregator
ad_clear_agg(aggregator);
if (select_new_active_agg) {
- printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
- slave->dev->master->name);
+ pr_info(DRV_NAME ": %s: Removing an active aggregator\n",
+ slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
}
@@ -2060,8 +2065,8 @@
// clear the aggregator
ad_clear_agg(temp_aggregator);
if (select_new_active_agg) {
- printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
- slave->dev->master->name);
+ pr_info(DRV_NAME ": %s: Removing an active aggregator\n",
+ slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
}
@@ -2109,8 +2114,8 @@
// select the active aggregator for the bond
if ((port = __get_first_port(bond))) {
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is "
- "uninitialized\n", bond->dev->name);
+ pr_warning(DRV_NAME ": %s: Warning: bond's first port is "
+ "uninitialized\n", bond->dev->name);
goto re_arm;
}
@@ -2123,8 +2128,8 @@
// for each port run the state machines
for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized "
- "port\n", bond->dev->name);
+ pr_warning(DRV_NAME ": %s: Warning: Found an uninitialized "
+ "port\n", bond->dev->name);
goto re_arm;
}
@@ -2165,8 +2170,9 @@
port = &(SLAVE_AD_INFO(slave).port);
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is "
- "uninitialized\n", slave->dev->name, slave->dev->master->name);
+ pr_warning(DRV_NAME ": %s: Warning: port of slave %s "
+ "is uninitialized\n",
+ slave->dev->name, slave->dev->master->name);
return;
}
@@ -2211,9 +2217,9 @@
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: %s: speed "
- "changed for uninitialized port on %s\n",
- slave->dev->master->name, slave->dev->name);
+ pr_warning(DRV_NAME ": Warning: %s: speed "
+ "changed for uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2239,9 +2245,9 @@
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed "
- "for uninitialized port on %s\n",
- slave->dev->master->name, slave->dev->name);
+ pr_warning(DRV_NAME ": %s: Warning: duplex changed "
+ "for uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2268,9 +2274,9 @@
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for "
- "uninitialized port on %s\n",
- slave->dev->master->name, slave->dev->name);
+ pr_warning(DRV_NAME ": Warning: %s: link status changed for "
+ "uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2374,8 +2380,8 @@
}
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
- printk(KERN_DEBUG DRV_NAME ": %s: Error: "
- "bond_3ad_get_active_agg_info failed\n", dev->name);
+ pr_debug(DRV_NAME ": %s: Error: "
+ "bond_3ad_get_active_agg_info failed\n", dev->name);
goto out;
}
@@ -2384,9 +2390,8 @@
if (slaves_in_agg == 0) {
/*the aggregator is empty*/
- printk(KERN_DEBUG DRV_NAME ": %s: Error: active "
- "aggregator is empty\n",
- dev->name);
+ pr_debug(DRV_NAME ": %s: Error: active aggregator is empty\n",
+ dev->name);
goto out;
}
@@ -2404,7 +2409,7 @@
}
if (slave_agg_no >= 0) {
- printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on "
+ pr_err(DRV_NAME ": %s: Error: Couldn't find a slave to tx on "
"for aggregator ID %d\n", dev->name, agg_id);
goto out;
}
@@ -2431,7 +2436,7 @@
dev_kfree_skb(skb);
}
read_unlock(&bond->lock);
- return 0;
+ return NETDEV_TX_OK;
}
int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev)
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 46d312b..9b5936f 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -79,8 +79,15 @@
*/
#define RLB_PROMISC_TIMEOUT 10*ALB_TIMER_TICKS_PER_SEC
-static const u8 mac_bcast[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
-static const u8 mac_v6_allmcast[ETH_ALEN] = {0x33,0x33,0x00,0x00,0x00,0x01};
+#ifndef __long_aligned
+#define __long_aligned __attribute__((aligned((sizeof(long)))))
+#endif
+static const u8 mac_bcast[ETH_ALEN] __long_aligned = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+};
+static const u8 mac_v6_allmcast[ETH_ALEN] __long_aligned = {
+ 0x33, 0x33, 0x00, 0x00, 0x00, 0x01
+};
static const int alb_delta_in_ticks = HZ / ALB_TIMER_TICKS_PER_SEC;
#pragma pack(1)
@@ -194,7 +201,7 @@
new_hashtbl = kzalloc(size, GFP_KERNEL);
if (!new_hashtbl) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: Failed to allocate TLB hash table\n",
bond->dev->name);
return -1;
@@ -460,8 +467,8 @@
if (assigned_slave) {
rx_hash_table[index].slave = assigned_slave;
- if (memcmp(rx_hash_table[index].mac_dst,
- mac_bcast, ETH_ALEN)) {
+ if (compare_ether_addr_64bits(rx_hash_table[index].mac_dst,
+ mac_bcast)) {
bond_info->rx_hashtbl[index].ntt = 1;
bond_info->rx_ntt = 1;
/* A slave has been removed from the
@@ -510,7 +517,7 @@
client_info->slave->dev->dev_addr,
client_info->mac_dst);
if (!skb) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: failed to create an ARP packet\n",
client_info->slave->dev->master->name);
continue;
@@ -521,7 +528,7 @@
if (client_info->tag) {
skb = vlan_put_tag(skb, client_info->vlan_id);
if (!skb) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: failed to insert VLAN tag\n",
client_info->slave->dev->master->name);
continue;
@@ -575,7 +582,7 @@
client_info = &(bond_info->rx_hashtbl[hash_index]);
if ((client_info->slave == slave) &&
- memcmp(client_info->mac_dst, mac_bcast, ETH_ALEN)) {
+ compare_ether_addr_64bits(client_info->mac_dst, mac_bcast)) {
client_info->ntt = 1;
ntt = 1;
}
@@ -605,7 +612,7 @@
client_info = &(bond_info->rx_hashtbl[hash_index]);
if (!client_info->slave) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: found a client with no channel in "
"the client's hash table\n",
bond->dev->name);
@@ -616,9 +623,9 @@
* unicast mac address.
*/
if ((client_info->ip_src == src_ip) &&
- memcmp(client_info->slave->dev->dev_addr,
- bond->dev->dev_addr, ETH_ALEN) &&
- memcmp(client_info->mac_dst, mac_bcast, ETH_ALEN)) {
+ compare_ether_addr_64bits(client_info->slave->dev->dev_addr,
+ bond->dev->dev_addr) &&
+ compare_ether_addr_64bits(client_info->mac_dst, mac_bcast)) {
client_info->ntt = 1;
bond_info->rx_ntt = 1;
}
@@ -645,7 +652,7 @@
if ((client_info->ip_src == arp->ip_src) &&
(client_info->ip_dst == arp->ip_dst)) {
/* the entry is already assigned to this client */
- if (memcmp(arp->mac_dst, mac_bcast, ETH_ALEN)) {
+ if (compare_ether_addr_64bits(arp->mac_dst, mac_bcast)) {
/* update mac address from arp */
memcpy(client_info->mac_dst, arp->mac_dst, ETH_ALEN);
}
@@ -680,7 +687,7 @@
memcpy(client_info->mac_dst, arp->mac_dst, ETH_ALEN);
client_info->slave = assigned_slave;
- if (memcmp(client_info->mac_dst, mac_bcast, ETH_ALEN)) {
+ if (compare_ether_addr_64bits(client_info->mac_dst, mac_bcast)) {
client_info->ntt = 1;
bond->alb_info.rx_ntt = 1;
} else {
@@ -802,7 +809,7 @@
new_hashtbl = kmalloc(size, GFP_KERNEL);
if (!new_hashtbl) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: Failed to allocate RLB hash table\n",
bond->dev->name);
return -1;
@@ -924,7 +931,7 @@
skb = vlan_put_tag(skb, vlan->vlan_id);
if (!skb) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: failed to insert VLAN tag\n",
bond->dev->name);
continue;
@@ -954,7 +961,7 @@
memcpy(s_addr.sa_data, addr, dev->addr_len);
s_addr.sa_family = dev->type;
if (dev_set_mac_address(dev, &s_addr)) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: dev_set_mac_address of dev %s failed! ALB "
"mode requires that the base driver support setting "
"the hw address also when the network device's "
@@ -1046,21 +1053,18 @@
int perm_curr_diff;
int perm_bond_diff;
- perm_curr_diff = memcmp(slave->perm_hwaddr,
- slave->dev->dev_addr,
- ETH_ALEN);
- perm_bond_diff = memcmp(slave->perm_hwaddr,
- bond->dev->dev_addr,
- ETH_ALEN);
+ perm_curr_diff = compare_ether_addr_64bits(slave->perm_hwaddr,
+ slave->dev->dev_addr);
+ perm_bond_diff = compare_ether_addr_64bits(slave->perm_hwaddr,
+ bond->dev->dev_addr);
if (perm_curr_diff && perm_bond_diff) {
struct slave *tmp_slave;
int i, found = 0;
bond_for_each_slave(bond, tmp_slave, i) {
- if (!memcmp(slave->perm_hwaddr,
- tmp_slave->dev->dev_addr,
- ETH_ALEN)) {
+ if (!compare_ether_addr_64bits(slave->perm_hwaddr,
+ tmp_slave->dev->dev_addr)) {
found = 1;
break;
}
@@ -1114,10 +1118,10 @@
* check uniqueness of slave's mac address against the other
* slaves in the bond.
*/
- if (memcmp(slave->perm_hwaddr, bond->dev->dev_addr, ETH_ALEN)) {
+ if (compare_ether_addr_64bits(slave->perm_hwaddr, bond->dev->dev_addr)) {
bond_for_each_slave(bond, tmp_slave1, i) {
- if (!memcmp(tmp_slave1->dev->dev_addr, slave->dev->dev_addr,
- ETH_ALEN)) {
+ if (!compare_ether_addr_64bits(tmp_slave1->dev->dev_addr,
+ slave->dev->dev_addr)) {
found = 1;
break;
}
@@ -1140,9 +1144,8 @@
bond_for_each_slave(bond, tmp_slave1, i) {
found = 0;
bond_for_each_slave(bond, tmp_slave2, j) {
- if (!memcmp(tmp_slave1->perm_hwaddr,
- tmp_slave2->dev->dev_addr,
- ETH_ALEN)) {
+ if (!compare_ether_addr_64bits(tmp_slave1->perm_hwaddr,
+ tmp_slave2->dev->dev_addr)) {
found = 1;
break;
}
@@ -1157,9 +1160,8 @@
}
if (!has_bond_addr) {
- if (!memcmp(tmp_slave1->dev->dev_addr,
- bond->dev->dev_addr,
- ETH_ALEN)) {
+ if (!compare_ether_addr_64bits(tmp_slave1->dev->dev_addr,
+ bond->dev->dev_addr)) {
has_bond_addr = tmp_slave1;
}
@@ -1170,13 +1172,15 @@
alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr,
bond->alb_info.rlb_enabled);
- printk(KERN_WARNING DRV_NAME
- ": %s: Warning: the hw address of slave %s is in use by "
- "the bond; giving it the hw address of %s\n",
- bond->dev->name, slave->dev->name, free_mac_slave->dev->name);
+ pr_warning(DRV_NAME
+ ": %s: Warning: the hw address of slave %s is "
+ "in use by the bond; giving it the hw address "
+ "of %s\n",
+ bond->dev->name, slave->dev->name,
+ free_mac_slave->dev->name);
} else if (has_bond_addr) {
- printk(KERN_ERR DRV_NAME
+ pr_err(DRV_NAME
": %s: Error: the hw address of slave %s is in use by the "
"bond; couldn't find a slave with a free hw address to "
"give it (this should not have happened)\n",
@@ -1311,7 +1315,7 @@
case ETH_P_IP: {
const struct iphdr *iph = ip_hdr(skb);
- if ((memcmp(eth_data->h_dest, mac_bcast, ETH_ALEN) == 0) ||
+ if (!compare_ether_addr_64bits(eth_data->h_dest, mac_bcast) ||
(iph->daddr == ip_bcast) ||
(iph->protocol == IPPROTO_IGMP)) {
do_tx_balance = 0;
@@ -1325,7 +1329,7 @@
/* IPv6 doesn't really use broadcast mac address, but leave
* that here just in case.
*/
- if (memcmp(eth_data->h_dest, mac_bcast, ETH_ALEN) == 0) {
+ if (!compare_ether_addr_64bits(eth_data->h_dest, mac_bcast)) {
do_tx_balance = 0;
break;
}
@@ -1333,7 +1337,7 @@
/* IPv6 uses all-nodes multicast as an equivalent to
* broadcasts in IPv4.
*/
- if (memcmp(eth_data->h_dest, mac_v6_allmcast, ETH_ALEN) == 0) {
+ if (!compare_ether_addr_64bits(eth_data->h_dest, mac_v6_allmcast)) {
do_tx_balance = 0;
break;
}
@@ -1413,7 +1417,7 @@
}
read_unlock(&bond->curr_slave_lock);
read_unlock(&bond->lock);
- return 0;
+ return NETDEV_TX_OK;
}
void bond_alb_monitor(struct work_struct *work)
@@ -1658,8 +1662,8 @@
struct slave *tmp_slave;
/* find slave that is holding the bond's mac address */
bond_for_each_slave(bond, tmp_slave, i) {
- if (!memcmp(tmp_slave->dev->dev_addr,
- bond->dev->dev_addr, ETH_ALEN)) {
+ if (!compare_ether_addr_64bits(tmp_slave->dev->dev_addr,
+ bond->dev->dev_addr)) {
swap_slave = tmp_slave;
break;
}
@@ -1737,7 +1741,8 @@
swap_slave = NULL;
bond_for_each_slave(bond, slave, i) {
- if (!memcmp(slave->dev->dev_addr, bond_dev->dev_addr, ETH_ALEN)) {
+ if (!compare_ether_addr_64bits(slave->dev->dev_addr,
+ bond_dev->dev_addr)) {
swap_slave = slave;
break;
}
diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c
index 0d73bf5..83921ab 100644
--- a/drivers/net/bonding/bond_ipv6.c
+++ b/drivers/net/bonding/bond_ipv6.c
@@ -79,14 +79,14 @@
ND_OPT_TARGET_LL_ADDR);
if (!skb) {
- printk(KERN_ERR DRV_NAME ": NA packet allocation failed\n");
+ pr_err(DRV_NAME ": NA packet allocation failed\n");
return;
}
if (vlan_id) {
skb = vlan_put_tag(skb, vlan_id);
if (!skb) {
- printk(KERN_ERR DRV_NAME ": failed to insert VLAN tag\n");
+ pr_err(DRV_NAME ": failed to insert VLAN tag\n");
return;
}
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index aa1be1f..a7e731f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -695,6 +695,9 @@
struct ifreq ifr;
struct mii_ioctl_data *mii;
+ if (!reporting && !netif_running(slave_dev))
+ return 0;
+
if (bond->params.use_carrier)
return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
@@ -1331,6 +1334,7 @@
struct slave *slave;
struct net_device *bond_dev = bond->dev;
unsigned long features = bond_dev->features;
+ unsigned long vlan_features = 0;
unsigned short max_hard_header_len = max((u16)ETH_HLEN,
bond_dev->hard_header_len);
int i;
@@ -1343,10 +1347,14 @@
features &= ~NETIF_F_ONE_FOR_ALL;
+ vlan_features = bond->first_slave->dev->vlan_features;
bond_for_each_slave(bond, slave, i) {
features = netdev_increment_features(features,
slave->dev->features,
NETIF_F_ONE_FOR_ALL);
+ vlan_features = netdev_increment_features(vlan_features,
+ slave->dev->vlan_features,
+ NETIF_F_ONE_FOR_ALL);
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
}
@@ -1354,6 +1362,7 @@
done:
features |= (bond_dev->features & BOND_VLAN_FEATURES);
bond_dev->features = netdev_fix_features(features, NULL);
+ bond_dev->vlan_features = netdev_fix_features(vlan_features, NULL);
bond_dev->hard_header_len = max_hard_header_len;
return 0;
@@ -1790,7 +1799,6 @@
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *oldcurrent;
struct sockaddr addr;
- int mac_addr_differ;
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
@@ -1814,9 +1822,8 @@
}
if (!bond->params.fail_over_mac) {
- mac_addr_differ = memcmp(bond_dev->dev_addr, slave->perm_hwaddr,
- ETH_ALEN);
- if (!mac_addr_differ && (bond->slave_cnt > 1))
+ if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr)
+ && bond->slave_cnt > 1)
pr_warning(DRV_NAME
": %s: Warning: the permanent HWaddr of %s - "
"%pM - is still in use by %s. "
@@ -4285,7 +4292,7 @@
dev_kfree_skb(skb);
}
read_unlock(&bond->lock);
- return 0;
+ return NETDEV_TX_OK;
}
@@ -4316,7 +4323,7 @@
read_unlock(&bond->curr_slave_lock);
read_unlock(&bond->lock);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -4362,7 +4369,7 @@
dev_kfree_skb(skb);
}
read_unlock(&bond->lock);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -4422,7 +4429,7 @@
/* frame sent to all suitable interfaces */
read_unlock(&bond->lock);
- return 0;
+ return NETDEV_TX_OK;
}
/*------------------------- Device initialization ---------------------------*/
@@ -4443,7 +4450,7 @@
}
}
-static int bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
const struct bonding *bond = netdev_priv(dev);
@@ -4755,7 +4762,7 @@
params->ad_select = BOND_AD_STABLE;
}
- if (max_bonds < 0 || max_bonds > INT_MAX) {
+ if (max_bonds < 0) {
pr_warning(DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it "
"was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
@@ -4837,7 +4844,7 @@
}
if (bond_mode == BOND_MODE_ALB) {
- printk(KERN_NOTICE DRV_NAME
+ pr_notice(DRV_NAME
": In ALB mode you might experience client "
"disconnections upon reconnection of a link if the "
"bonding module updelay parameter (%d msec) is "
@@ -4961,9 +4968,9 @@
arp_ip_count);
for (i = 0; i < arp_ip_count; i++)
- printk(" %s", arp_ip_target[i]);
+ pr_info(" %s", arp_ip_target[i]);
- printk("\n");
+ pr_info("\n");
} else if (max_bonds) {
/* miimon and arp_interval not set, we need one so things
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 55bf34f..6044e12 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -218,9 +218,8 @@
/* Quick sanity check -- is the bond interface up? */
if (!(bond->dev->flags & IFF_UP)) {
- printk(KERN_WARNING DRV_NAME
- ": %s: doing slave updates when interface is down.\n",
- bond->dev->name);
+ pr_warning(DRV_NAME ": %s: doing slave updates when "
+ "interface is down.\n", bond->dev->name);
}
/* Note: We can't hold bond->lock here, as bond_create grabs it. */
@@ -778,12 +777,14 @@
goto out;
} else {
if ((new_value % bond->params.miimon) != 0) {
- printk(KERN_WARNING DRV_NAME
- ": %s: Warning: down delay (%d) is not a multiple "
- "of miimon (%d), delay rounded to %d ms\n",
- bond->dev->name, new_value, bond->params.miimon,
- (new_value / bond->params.miimon) *
- bond->params.miimon);
+ pr_warning(DRV_NAME
+ ": %s: Warning: down delay (%d) is not a "
+ "multiple of miimon (%d), delay rounded "
+ "to %d ms\n",
+ bond->dev->name, new_value,
+ bond->params.miimon,
+ (new_value / bond->params.miimon) *
+ bond->params.miimon);
}
bond->params.downdelay = new_value / bond->params.miimon;
pr_info(DRV_NAME ": %s: Setting down delay to %d.\n",
@@ -838,12 +839,14 @@
goto out;
} else {
if ((new_value % bond->params.miimon) != 0) {
- printk(KERN_WARNING DRV_NAME
- ": %s: Warning: up delay (%d) is not a multiple "
- "of miimon (%d), updelay rounded to %d ms\n",
- bond->dev->name, new_value, bond->params.miimon,
- (new_value / bond->params.miimon) *
- bond->params.miimon);
+ pr_warning(DRV_NAME
+ ": %s: Warning: up delay (%d) is not a "
+ "multiple of miimon (%d), updelay rounded "
+ "to %d ms\n",
+ bond->dev->name, new_value,
+ bond->params.miimon,
+ (new_value / bond->params.miimon) *
+ bond->params.miimon);
}
bond->params.updelay = new_value / bond->params.miimon;
pr_info(DRV_NAME ": %s: Setting up delay to %d.\n",
@@ -1299,9 +1302,9 @@
new_active = slave;
if (new_active == old_active) {
/* do nothing */
- printk(KERN_INFO DRV_NAME
- ": %s: %s is already the current active slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info(DRV_NAME
+ ": %s: %s is already the current active slave.\n",
+ bond->dev->name, slave->dev->name);
goto out;
}
else {
@@ -1309,17 +1312,17 @@
(old_active) &&
(new_active->link == BOND_LINK_UP) &&
IS_UP(new_active->dev)) {
- printk(KERN_INFO DRV_NAME
- ": %s: Setting %s as active slave.\n",
- bond->dev->name, slave->dev->name);
- bond_change_active_slave(bond, new_active);
+ pr_info(DRV_NAME
+ ": %s: Setting %s as active slave.\n",
+ bond->dev->name, slave->dev->name);
+ bond_change_active_slave(bond, new_active);
}
else {
- printk(KERN_INFO DRV_NAME
- ": %s: Could not set %s as active slave; "
- "either %s is down or the link is down.\n",
- bond->dev->name, slave->dev->name,
- slave->dev->name);
+ pr_info(DRV_NAME
+ ": %s: Could not set %s as active slave; "
+ "either %s is down or the link is down.\n",
+ bond->dev->name, slave->dev->name,
+ slave->dev->name);
}
goto out;
}
@@ -1537,8 +1540,8 @@
/* Is someone being kinky and naming a device bonding_master? */
if (__dev_get_by_name(&init_net,
class_attr_bonding_masters.attr.name))
- printk(KERN_ERR
- "network device named %s already exists in sysfs",
+ pr_err("network device named %s already "
+ "exists in sysfs",
class_attr_bonding_masters.attr.name);
ret = 0;
}
@@ -1566,7 +1569,7 @@
err = sysfs_create_group(&(dev->dev.kobj), &bonding_group);
if (err)
- printk(KERN_EMERG "eek! didn't create group!\n");
+ pr_emerg("eek! didn't create group!\n");
return err;
}
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6290a50..6824771 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -163,9 +163,9 @@
u32 original_flags;
u32 original_mtu;
u32 link_failure_count;
+ u8 perm_hwaddr[ETH_ALEN];
u16 speed;
u8 duplex;
- u8 perm_hwaddr[ETH_ALEN];
struct ad_slave_info ad_info; /* HUGE - better to dynamically alloc */
struct tlb_slave_info tlb_info;
};
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 33821a8..0900743 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -41,6 +41,13 @@
---help---
Driver for the SJA1000 CAN controllers from Philips or NXP
+config CAN_SJA1000_ISA
+ depends on CAN_SJA1000 && ISA
+ tristate "ISA Bus based legacy SJA1000 driver"
+ ---help---
+ This driver adds legacy support for SJA1000 chips connected to
+ the ISA bus using I/O port, memory mapped or indirect access.
+
config CAN_SJA1000_PLATFORM
depends on CAN_SJA1000
tristate "Generic Platform Bus based SJA1000 driver"
@@ -61,11 +68,12 @@
you may want to enable this option.
config CAN_EMS_PCI
- tristate "EMS CPC-PCI and CPC-PCIe Card"
+ tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
depends on PCI && CAN_SJA1000
---help---
- This driver is for the one or two channel CPC-PCI and CPC-PCIe
- cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+ This driver is for the one, two or four channel CPC-PCI,
+ CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+ (http://www.ems-wuensche.de).
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index e1a4f82..f0b9a1e 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -315,7 +315,7 @@
{
struct can_priv *priv = netdev_priv(dev);
- if ((dev->flags & IFF_ECHO) && priv->echo_skb[idx]) {
+ if (priv->echo_skb[idx]) {
netif_rx(priv->echo_skb[idx]);
priv->echo_skb[idx] = NULL;
}
@@ -323,6 +323,22 @@
EXPORT_SYMBOL_GPL(can_get_echo_skb);
/*
+ * Remove the skb from the stack and free it.
+ *
+ * The function is typically called when TX failed.
+ */
+void can_free_echo_skb(struct net_device *dev, int idx)
+{
+ struct can_priv *priv = netdev_priv(dev);
+
+ if (priv->echo_skb[idx]) {
+ kfree_skb(priv->echo_skb[idx]);
+ priv->echo_skb[idx] = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(can_free_echo_skb);
+
+/*
* CAN device restart for bus-off recovery
*/
void can_restart(unsigned long data)
@@ -357,7 +373,6 @@
netif_rx(skb);
- dev->last_rx = jiffies;
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 9d0c08d..9d245ac 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_CAN_SJA1000) += sja1000.o
+obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index 121b641..7d84b8a 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -32,13 +32,16 @@
#define DRV_NAME "ems_pci"
MODULE_AUTHOR("Sebastian Haas <haas@ems-wuenche.com>");
-MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe CAN cards");
-MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe CAN card");
+MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe/104P CAN cards");
+MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe/104P CAN card");
MODULE_LICENSE("GPL v2");
-#define EMS_PCI_MAX_CHAN 2
+#define EMS_PCI_V1_MAX_CHAN 2
+#define EMS_PCI_V2_MAX_CHAN 4
+#define EMS_PCI_MAX_CHAN EMS_PCI_V2_MAX_CHAN
struct ems_pci_card {
+ int version;
int channels;
struct pci_dev *pci_dev;
@@ -63,12 +66,22 @@
#define PITA2_MISC_CONFIG 0x04000000 /* Multiplexed parallel interface */
/*
+ * Register definitions for the PLX 9030
+ */
+#define PLX_ICSR 0x4c /* Interrupt Control/Status register */
+#define PLX_ICSR_LINTI1_ENA 0x0001 /* LINTi1 Enable */
+#define PLX_ICSR_PCIINT_ENA 0x0040 /* PCI Interrupt Enable */
+#define PLX_ICSR_LINTI1_CLR 0x0400 /* Local Edge Triggerable Interrupt Clear */
+#define PLX_ICSR_ENA_CLR (PLX_ICSR_LINTI1_ENA | PLX_ICSR_PCIINT_ENA | \
+ PLX_ICSR_LINTI1_CLR)
+
+/*
* The board configuration is probably following:
* RX1 is connected to ground.
* TX1 is not connected.
* CLKO is not connected.
* Setting the OCR register to 0xDA is a good idea.
- * This means normal output mode , push-pull and the correct polarity.
+ * This means normal output mode, push-pull and the correct polarity.
*/
#define EMS_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
@@ -79,17 +92,21 @@
* is driven by the first one CLKOUT output.
*/
#define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
-#define EMS_PCI_MEM_SIZE 4096 /* Size of the remapped io-memory */
+
+#define EMS_PCI_V1_BASE_BAR 1
+#define EMS_PCI_V1_MEM_SIZE 4096
+#define EMS_PCI_V2_BASE_BAR 2
+#define EMS_PCI_V2_MEM_SIZE 128
#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */
#define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */
-#define EMS_PCI_PORT_BYTES 0x4 /* Each register occupies 4 bytes */
-
-#define EMS_PCI_VENDOR_ID 0x110a /* PCI device and vendor ID */
-#define EMS_PCI_DEVICE_ID 0x2104
-
static struct pci_device_id ems_pci_tbl[] = {
- {EMS_PCI_VENDOR_ID, EMS_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ /* CPC-PCI v1 */
+ {PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,},
+ /* CPC-PCI v2 */
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4000},
+ /* CPC-104P v2 */
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4002},
{0,}
};
MODULE_DEVICE_TABLE(pci, ems_pci_tbl);
@@ -97,28 +114,47 @@
/*
* Helper to read internal registers from card logic (not CAN)
*/
-static u8 ems_pci_readb(struct ems_pci_card *card, unsigned int port)
+static u8 ems_pci_v1_readb(struct ems_pci_card *card, unsigned int port)
{
- return readb(card->base_addr + (port * EMS_PCI_PORT_BYTES));
+ return readb(card->base_addr + (port * 4));
}
-static u8 ems_pci_read_reg(const struct sja1000_priv *priv, int port)
+static u8 ems_pci_v1_read_reg(const struct sja1000_priv *priv, int port)
{
- return readb(priv->reg_base + (port * EMS_PCI_PORT_BYTES));
+ return readb(priv->reg_base + (port * 4));
}
-static void ems_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val)
+static void ems_pci_v1_write_reg(const struct sja1000_priv *priv,
+ int port, u8 val)
{
- writeb(val, priv->reg_base + (port * EMS_PCI_PORT_BYTES));
+ writeb(val, priv->reg_base + (port * 4));
}
-static void ems_pci_post_irq(const struct sja1000_priv *priv)
+static void ems_pci_v1_post_irq(const struct sja1000_priv *priv)
{
struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
/* reset int flag of pita */
- writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0, card->conf_addr
- + PITA2_ICR);
+ writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0,
+ card->conf_addr + PITA2_ICR);
+}
+
+static u8 ems_pci_v2_read_reg(const struct sja1000_priv *priv, int port)
+{
+ return readb(priv->reg_base + port);
+}
+
+static void ems_pci_v2_write_reg(const struct sja1000_priv *priv,
+ int port, u8 val)
+{
+ writeb(val, priv->reg_base + port);
+}
+
+static void ems_pci_v2_post_irq(const struct sja1000_priv *priv)
+{
+ struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
+
+ writel(PLX_ICSR_ENA_CLR, card->conf_addr + PLX_ICSR);
}
/*
@@ -130,12 +166,12 @@
unsigned char res;
/* Make sure SJA1000 is in reset mode */
- ems_pci_write_reg(priv, REG_MOD, 1);
+ priv->write_reg(priv, REG_MOD, 1);
- ems_pci_write_reg(priv, REG_CDR, CDR_PELICAN);
+ priv->write_reg(priv, REG_CDR, CDR_PELICAN);
/* read reset-values */
- res = ems_pci_read_reg(priv, REG_CDR);
+ res = priv->read_reg(priv, REG_CDR);
if (res == CDR_PELICAN)
return 1;
@@ -188,6 +224,7 @@
struct sja1000_priv *priv;
struct net_device *dev;
struct ems_pci_card *card;
+ int max_chan, mem_size, base_bar;
int err, i;
/* Enabling PCI device */
@@ -210,37 +247,52 @@
card->channels = 0;
- /* Remap PITA configuration space, and controller memory area */
- card->conf_addr = pci_iomap(pdev, 0, EMS_PCI_MEM_SIZE);
+ if (pdev->vendor == PCI_VENDOR_ID_PLX) {
+ card->version = 2; /* CPC-PCI v2 */
+ max_chan = EMS_PCI_V2_MAX_CHAN;
+ base_bar = EMS_PCI_V2_BASE_BAR;
+ mem_size = EMS_PCI_V2_MEM_SIZE;
+ } else {
+ card->version = 1; /* CPC-PCI v1 */
+ max_chan = EMS_PCI_V1_MAX_CHAN;
+ base_bar = EMS_PCI_V1_BASE_BAR;
+ mem_size = EMS_PCI_V1_MEM_SIZE;
+ }
+
+ /* Remap configuration space and controller memory area */
+ card->conf_addr = pci_iomap(pdev, 0, mem_size);
if (card->conf_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
- card->base_addr = pci_iomap(pdev, 1, EMS_PCI_MEM_SIZE);
+ card->base_addr = pci_iomap(pdev, base_bar, mem_size);
if (card->base_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
- /* Configure PITA-2 parallel interface (enable MUX) */
- writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC);
+ if (card->version == 1) {
+ /* Configure PITA-2 parallel interface (enable MUX) */
+ writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC);
- /* Check for unique EMS CAN signature */
- if (ems_pci_readb(card, 0) != 0x55 ||
- ems_pci_readb(card, 1) != 0xAA ||
- ems_pci_readb(card, 2) != 0x01 ||
- ems_pci_readb(card, 3) != 0xCB ||
- ems_pci_readb(card, 4) != 0x11) {
- dev_err(&pdev->dev, "Not EMS Dr. Thomas Wuensche interface\n");
- err = -ENODEV;
- goto failure_cleanup;
+ /* Check for unique EMS CAN signature */
+ if (ems_pci_v1_readb(card, 0) != 0x55 ||
+ ems_pci_v1_readb(card, 1) != 0xAA ||
+ ems_pci_v1_readb(card, 2) != 0x01 ||
+ ems_pci_v1_readb(card, 3) != 0xCB ||
+ ems_pci_v1_readb(card, 4) != 0x11) {
+ dev_err(&pdev->dev,
+ "Not EMS Dr. Thomas Wuensche interface\n");
+ err = -ENODEV;
+ goto failure_cleanup;
+ }
}
ems_pci_card_reset(card);
/* Detect available channels */
- for (i = 0; i < EMS_PCI_MAX_CHAN; i++) {
+ for (i = 0; i < max_chan; i++) {
dev = alloc_sja1000dev(0);
if (dev == NULL) {
err = -ENOMEM;
@@ -255,20 +307,32 @@
dev->irq = pdev->irq;
priv->reg_base = card->base_addr + EMS_PCI_CAN_BASE_OFFSET
+ (i * EMS_PCI_CAN_CTRL_SIZE);
+ if (card->version == 1) {
+ priv->read_reg = ems_pci_v1_read_reg;
+ priv->write_reg = ems_pci_v1_write_reg;
+ priv->post_irq = ems_pci_v1_post_irq;
+ } else {
+ priv->read_reg = ems_pci_v2_read_reg;
+ priv->write_reg = ems_pci_v2_write_reg;
+ priv->post_irq = ems_pci_v2_post_irq;
+ }
/* Check if channel is present */
if (ems_pci_check_chan(priv)) {
- priv->read_reg = ems_pci_read_reg;
- priv->write_reg = ems_pci_write_reg;
- priv->post_irq = ems_pci_post_irq;
priv->can.clock.freq = EMS_PCI_CAN_CLOCK;
priv->ocr = EMS_PCI_OCR;
priv->cdr = EMS_PCI_CDR;
SET_NETDEV_DEV(dev, &pdev->dev);
- /* Enable interrupts from card */
- writel(PITA2_ICR_INT0_EN, card->conf_addr + PITA2_ICR);
+ if (card->version == 1)
+ /* reset int flag of pita */
+ writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0,
+ card->conf_addr + PITA2_ICR);
+ else
+ /* enable IRQ in PLX 9030 */
+ writel(PLX_ICSR_ENA_CLR,
+ card->conf_addr + PLX_ICSR);
/* Register SJA1000 device */
err = register_sja1000dev(dev);
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 08ebee7..16d2ecd 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -238,10 +238,10 @@
* xx xx xx xx ff ll 00 11 22 33 44 55 66 77
* [ can-id ] [flags] [len] [can data (up to 8 bytes]
*/
-static int sja1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
struct can_frame *cf = (struct can_frame *)skb->data;
uint8_t fi;
uint8_t dlc;
@@ -275,14 +275,13 @@
for (i = 0; i < dlc; i++)
priv->write_reg(priv, dreg++, cf->data[i]);
- stats->tx_bytes += dlc;
dev->trans_start = jiffies;
can_put_echo_skb(skb, dev, 0);
priv->write_reg(priv, REG_CMR, CMD_TR);
- return 0;
+ return NETDEV_TX_OK;
}
static void sja1000_rx(struct net_device *dev)
@@ -339,7 +338,6 @@
netif_rx(skb);
- dev->last_rx = jiffies;
stats->rx_packets++;
stats->rx_bytes += dlc;
}
@@ -427,7 +425,7 @@
dev_dbg(dev->dev.parent, "arbitration lost interrupt\n");
alc = priv->read_reg(priv, REG_ALC);
priv->can.can_stats.arbitration_lost++;
- stats->rx_errors++;
+ stats->tx_errors++;
cf->can_id |= CAN_ERR_LOSTARB;
cf->data[0] = alc & 0x1f;
}
@@ -454,7 +452,6 @@
netif_rx(skb);
- dev->last_rx = jiffies;
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
@@ -485,6 +482,7 @@
if (isrc & IRQ_TI) {
/* transmission complete interrupt */
+ stats->tx_bytes += priv->read_reg(priv, REG_FI) & 0xf;
stats->tx_packets++;
can_get_echo_skb(dev, 0);
netif_wake_queue(dev);
diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c
new file mode 100644
index 0000000..a6a51f1
--- /dev/null
+++ b/drivers/net/can/sja1000/sja1000_isa.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/isa.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/platform/sja1000.h>
+
+#include "sja1000.h"
+
+#define DRV_NAME "sja1000_isa"
+
+#define MAXDEV 8
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the ISA bus");
+MODULE_LICENSE("GPL v2");
+
+#define CLK_DEFAULT 16000000 /* 16 MHz */
+#define CDR_DEFAULT (CDR_CBP | CDR_CLK_OFF)
+#define OCR_DEFAULT OCR_TX0_PUSHPULL
+
+static unsigned long port[MAXDEV];
+static unsigned long mem[MAXDEV];
+static int __devinitdata irq[MAXDEV];
+static int __devinitdata clk[MAXDEV];
+static char __devinitdata cdr[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
+static char __devinitdata ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
+static char __devinitdata indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
+
+module_param_array(port, ulong, NULL, S_IRUGO);
+MODULE_PARM_DESC(port, "I/O port number");
+
+module_param_array(mem, ulong, NULL, S_IRUGO);
+MODULE_PARM_DESC(mem, "I/O memory address");
+
+module_param_array(indirect, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
+
+module_param_array(irq, int, NULL, S_IRUGO);
+MODULE_PARM_DESC(irq, "IRQ number");
+
+module_param_array(clk, int, NULL, S_IRUGO);
+MODULE_PARM_DESC(clk, "External oscillator clock frequency "
+ "(default=16000000 [16 MHz])");
+
+module_param_array(cdr, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(cdr, "Clock divider register "
+ "(default=0x48 [CDR_CBP | CDR_CLK_OFF])");
+
+module_param_array(ocr, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(ocr, "Output control register "
+ "(default=0x18 [OCR_TX0_PUSHPULL])");
+
+#define SJA1000_IOSIZE 0x20
+#define SJA1000_IOSIZE_INDIRECT 0x02
+
+static u8 sja1000_isa_mem_read_reg(const struct sja1000_priv *priv, int reg)
+{
+ return readb(priv->reg_base + reg);
+}
+
+static void sja1000_isa_mem_write_reg(const struct sja1000_priv *priv,
+ int reg, u8 val)
+{
+ writeb(val, priv->reg_base + reg);
+}
+
+static u8 sja1000_isa_port_read_reg(const struct sja1000_priv *priv, int reg)
+{
+ return inb((unsigned long)priv->reg_base + reg);
+}
+
+static void sja1000_isa_port_write_reg(const struct sja1000_priv *priv,
+ int reg, u8 val)
+{
+ outb(val, (unsigned long)priv->reg_base + reg);
+}
+
+static u8 sja1000_isa_port_read_reg_indirect(const struct sja1000_priv *priv,
+ int reg)
+{
+ unsigned long base = (unsigned long)priv->reg_base;
+
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static void sja1000_isa_port_write_reg_indirect(const struct sja1000_priv *priv,
+ int reg, u8 val)
+{
+ unsigned long base = (unsigned long)priv->reg_base;
+
+ outb(reg, base);
+ outb(val, base + 1);
+}
+
+static int __devinit sja1000_isa_match(struct device *pdev, unsigned int idx)
+{
+ if (port[idx] || mem[idx]) {
+ if (irq[idx])
+ return 1;
+ } else if (idx)
+ return 0;
+
+ dev_err(pdev, "insufficient parameters supplied\n");
+ return 0;
+}
+
+static int __devinit sja1000_isa_probe(struct device *pdev, unsigned int idx)
+{
+ struct net_device *dev;
+ struct sja1000_priv *priv;
+ void __iomem *base = NULL;
+ int iosize = SJA1000_IOSIZE;
+ int err;
+
+ if (mem[idx]) {
+ if (!request_mem_region(mem[idx], iosize, DRV_NAME)) {
+ err = -EBUSY;
+ goto exit;
+ }
+ base = ioremap_nocache(mem[idx], iosize);
+ if (!base) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+ } else {
+ if (indirect[idx] > 0 ||
+ (indirect[idx] == -1 && indirect[0] > 0))
+ iosize = SJA1000_IOSIZE_INDIRECT;
+ if (!request_region(port[idx], iosize, DRV_NAME)) {
+ err = -EBUSY;
+ goto exit;
+ }
+ }
+
+ dev = alloc_sja1000dev(0);
+ if (!dev) {
+ err = -ENOMEM;
+ goto exit_unmap;
+ }
+ priv = netdev_priv(dev);
+
+ dev->irq = irq[idx];
+ priv->irq_flags = IRQF_SHARED;
+ if (mem[idx]) {
+ priv->reg_base = base;
+ dev->base_addr = mem[idx];
+ priv->read_reg = sja1000_isa_mem_read_reg;
+ priv->write_reg = sja1000_isa_mem_write_reg;
+ } else {
+ priv->reg_base = (void __iomem *)port[idx];
+ dev->base_addr = port[idx];
+
+ if (iosize == SJA1000_IOSIZE_INDIRECT) {
+ priv->read_reg = sja1000_isa_port_read_reg_indirect;
+ priv->write_reg = sja1000_isa_port_write_reg_indirect;
+ } else {
+ priv->read_reg = sja1000_isa_port_read_reg;
+ priv->write_reg = sja1000_isa_port_write_reg;
+ }
+ }
+
+ if (clk[idx])
+ priv->can.clock.freq = clk[idx] / 2;
+ else if (clk[0])
+ priv->can.clock.freq = clk[0] / 2;
+ else
+ priv->can.clock.freq = CLK_DEFAULT / 2;
+
+ if (ocr[idx] != -1)
+ priv->ocr = ocr[idx] & 0xff;
+ else if (ocr[0] != -1)
+ priv->ocr = ocr[0] & 0xff;
+ else
+ priv->ocr = OCR_DEFAULT;
+
+ if (cdr[idx] != -1)
+ priv->cdr = cdr[idx] & 0xff;
+ else if (cdr[0] != -1)
+ priv->cdr = cdr[0] & 0xff;
+ else
+ priv->cdr = CDR_DEFAULT;
+
+ dev_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, pdev);
+
+ err = register_sja1000dev(dev);
+ if (err) {
+ dev_err(pdev, "registering %s failed (err=%d)\n",
+ DRV_NAME, err);
+ goto exit_unmap;
+ }
+
+ dev_info(pdev, "%s device registered (reg_base=0x%p, irq=%d)\n",
+ DRV_NAME, priv->reg_base, dev->irq);
+ return 0;
+
+ exit_unmap:
+ if (mem[idx])
+ iounmap(base);
+ exit_release:
+ if (mem[idx])
+ release_mem_region(mem[idx], iosize);
+ else
+ release_region(port[idx], iosize);
+ exit:
+ return err;
+}
+
+static int __devexit sja1000_isa_remove(struct device *pdev, unsigned int idx)
+{
+ struct net_device *dev = dev_get_drvdata(pdev);
+ struct sja1000_priv *priv = netdev_priv(dev);
+
+ unregister_sja1000dev(dev);
+ dev_set_drvdata(pdev, NULL);
+
+ if (mem[idx]) {
+ iounmap(priv->reg_base);
+ release_mem_region(mem[idx], SJA1000_IOSIZE);
+ } else {
+ if (priv->read_reg == sja1000_isa_port_read_reg_indirect)
+ release_region(port[idx], SJA1000_IOSIZE_INDIRECT);
+ else
+ release_region(port[idx], SJA1000_IOSIZE);
+ }
+ free_sja1000dev(dev);
+
+ return 0;
+}
+
+static struct isa_driver sja1000_isa_driver = {
+ .match = sja1000_isa_match,
+ .probe = sja1000_isa_probe,
+ .remove = __devexit_p(sja1000_isa_remove),
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static int __init sja1000_isa_init(void)
+{
+ int err = isa_register_driver(&sja1000_isa_driver, MAXDEV);
+
+ if (!err)
+ printk(KERN_INFO
+ "Legacy %s driver for max. %d devices registered\n",
+ DRV_NAME, MAXDEV);
+ return err;
+}
+
+static void __exit sja1000_isa_exit(void)
+{
+ isa_unregister_driver(&sja1000_isa_driver);
+}
+
+module_init(sja1000_isa_init);
+module_exit(sja1000_isa_exit);
diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index a10c1d7..6971f6c 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -83,7 +83,7 @@
netif_rx(skb);
}
-static int vcan_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
{
struct net_device_stats *stats = &dev->stats;
int loop;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index eb06667..05916aa 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -2918,7 +2918,7 @@
return 0;
}
-static int cas_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t cas_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct cas *cp = netdev_priv(dev);
@@ -2928,7 +2928,7 @@
static int ring;
if (skb_padto(skb, cp->min_frame_size))
- return 0;
+ return NETDEV_TX_OK;
/* XXX: we need some higher-level QoS hooks to steer packets to
* individual queues.
@@ -2936,7 +2936,7 @@
if (cas_xmit_tx_ringN(cp, ring++ & N_TX_RINGS_MASK, skb))
return NETDEV_TX_BUSY;
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void cas_init_tx_dma(struct cas *cp)
@@ -4875,10 +4875,6 @@
break;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN)) {
- rc = -EPERM;
- break;
- }
spin_lock_irqsave(&cp->lock, flags);
cas_mif_poll(cp, 0);
rc = cas_phy_write(cp, data->reg_num & 0x1f, data->val_in);
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 3711d64..8c658cf 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1776,7 +1776,7 @@
/*
* Adds the CPL header to the sk_buff and passes it to t1_sge_tx.
*/
-int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct adapter *adapter = dev->ml_priv;
struct sge *sge = adapter->sge;
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h
index 8c94051..00cc37f 100644
--- a/drivers/net/chelsio/sge.h
+++ b/drivers/net/chelsio/sge.h
@@ -78,7 +78,7 @@
irqreturn_t t1_interrupt(int irq, void *cookie);
int t1_poll(struct napi_struct *, int);
-int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
void t1_set_vlan_accel(struct adapter *adapter, int on_off);
void t1_sge_start(struct sge *);
void t1_sge_stop(struct sge *);
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 74c3429..d45eacb 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -774,10 +774,81 @@
return 0;
}
+static int cnic_alloc_l2_rings(struct cnic_dev *dev, int pages)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+
+ cp->l2_ring_size = pages * BCM_PAGE_SIZE;
+ cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
+ &cp->l2_ring_map);
+ if (!cp->l2_ring)
+ return -ENOMEM;
+
+ cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
+ cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
+ cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
+ &cp->l2_buf_map);
+ if (!cp->l2_buf)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int cnic_alloc_uio(struct cnic_dev *dev) {
+ struct cnic_local *cp = dev->cnic_priv;
+ struct uio_info *uinfo;
+ int ret;
+
+ uinfo = kzalloc(sizeof(*uinfo), GFP_ATOMIC);
+ if (!uinfo)
+ return -ENOMEM;
+
+ uinfo->mem[0].addr = dev->netdev->base_addr;
+ uinfo->mem[0].internal_addr = dev->regview;
+ uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
+ uinfo->mem[0].memtype = UIO_MEM_PHYS;
+
+ uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
+ if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+ if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
+ uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
+ else
+ uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
+
+ uinfo->name = "bnx2_cnic";
+ }
+
+ uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
+
+ uinfo->mem[2].addr = (unsigned long) cp->l2_ring;
+ uinfo->mem[2].size = cp->l2_ring_size;
+ uinfo->mem[2].memtype = UIO_MEM_LOGICAL;
+
+ uinfo->mem[3].addr = (unsigned long) cp->l2_buf;
+ uinfo->mem[3].size = cp->l2_buf_size;
+ uinfo->mem[3].memtype = UIO_MEM_LOGICAL;
+
+ uinfo->version = CNIC_MODULE_VERSION;
+ uinfo->irq = UIO_IRQ_CUSTOM;
+
+ uinfo->open = cnic_uio_open;
+ uinfo->release = cnic_uio_close;
+
+ uinfo->priv = dev;
+
+ ret = uio_register_device(&dev->pcidev->dev, uinfo);
+ if (ret) {
+ kfree(uinfo);
+ return ret;
+ }
+
+ cp->cnic_uinfo = uinfo;
+ return 0;
+}
+
static int cnic_alloc_bnx2_resc(struct cnic_dev *dev)
{
struct cnic_local *cp = dev->cnic_priv;
- struct uio_info *uinfo;
int ret;
ret = cnic_alloc_dma(dev, &cp->kwq_info, KWQ_PAGE_CNT, 1);
@@ -794,60 +865,14 @@
if (ret)
goto error;
- cp->l2_ring_size = 2 * BCM_PAGE_SIZE;
- cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
- &cp->l2_ring_map);
- if (!cp->l2_ring)
+ ret = cnic_alloc_l2_rings(dev, 2);
+ if (ret)
goto error;
- cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
- cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
- cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
- &cp->l2_buf_map);
- if (!cp->l2_buf)
+ ret = cnic_alloc_uio(dev);
+ if (ret)
goto error;
- uinfo = kzalloc(sizeof(*uinfo), GFP_ATOMIC);
- if (!uinfo)
- goto error;
-
- uinfo->mem[0].addr = dev->netdev->base_addr;
- uinfo->mem[0].internal_addr = dev->regview;
- uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
- uinfo->mem[0].memtype = UIO_MEM_PHYS;
-
- uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
- if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
- uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
- else
- uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
- uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
-
- uinfo->mem[2].addr = (unsigned long) cp->l2_ring;
- uinfo->mem[2].size = cp->l2_ring_size;
- uinfo->mem[2].memtype = UIO_MEM_LOGICAL;
-
- uinfo->mem[3].addr = (unsigned long) cp->l2_buf;
- uinfo->mem[3].size = cp->l2_buf_size;
- uinfo->mem[3].memtype = UIO_MEM_LOGICAL;
-
- uinfo->name = "bnx2_cnic";
- uinfo->version = CNIC_MODULE_VERSION;
- uinfo->irq = UIO_IRQ_CUSTOM;
-
- uinfo->open = cnic_uio_open;
- uinfo->release = cnic_uio_close;
-
- uinfo->priv = dev;
-
- ret = uio_register_device(&dev->pcidev->dev, uinfo);
- if (ret) {
- kfree(uinfo);
- goto error;
- }
-
- cp->cnic_uinfo = uinfo;
-
return 0;
error:
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index fd5e32c..3e3fab8 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -54,7 +54,7 @@
MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
-#define CPMAC_VERSION "0.5.0"
+#define CPMAC_VERSION "0.5.1"
/* frame size + 802.1q tag */
#define CPMAC_SKB_SIZE (ETH_FRAME_LEN + 4)
#define CPMAC_QUEUES 8
@@ -1109,7 +1109,7 @@
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id;
- char *mdio_bus_id = "0";
+ char mdio_bus_id[BUS_ID_SIZE];
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
@@ -1117,22 +1117,23 @@
pdata = pdev->dev.platform_data;
- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
- if (!(pdata->phy_mask & (1 << phy_id)))
- continue;
- if (!cpmac_mii->phy_map[phy_id])
- continue;
- break;
+ if (external_switch || dumb_switch) {
+ strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
+ phy_id = pdev->id;
+ } else {
+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+ if (!(pdata->phy_mask & (1 << phy_id)))
+ continue;
+ if (!cpmac_mii->phy_map[phy_id])
+ continue;
+ strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE);
+ break;
+ }
}
if (phy_id == PHY_MAX_ADDR) {
- if (external_switch || dumb_switch) {
- mdio_bus_id = 0; /* fixed phys bus */
- phy_id = pdev->id;
- } else {
- dev_err(&pdev->dev, "no PHY present\n");
- return -ENODEV;
- }
+ dev_err(&pdev->dev, "no PHY present\n");
+ return -ENODEV;
}
dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
@@ -1166,8 +1167,11 @@
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev),
- &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+
+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+
if (IS_ERR(priv->phy)) {
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not attach to PHY\n",
@@ -1241,11 +1245,11 @@
cpmac_mii->reset(cpmac_mii);
- for (i = 0; i < 300000; i++)
+ for (i = 0; i < 300; i++)
if ((mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE)))
break;
else
- cpu_relax();
+ msleep(10);
mask &= 0x7fffffff;
if (mask & (mask - 1)) {
@@ -1254,7 +1258,7 @@
}
cpmac_mii->phy_mask = ~(mask | 0x80000000);
- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "0");
+ snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
res = mdiobus_register(cpmac_mii);
if (res)
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 7a18dc7..15c0195 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -1108,7 +1108,7 @@
spin_unlock_irqrestore(&np->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 55445f9..0c54219 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -177,13 +177,10 @@
#elif defined(CONFIG_MACH_IXDP2351)
static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
-#include <asm/irq.h>
#elif defined(CONFIG_ARCH_IXDP2X01)
-#include <asm/irq.h>
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_PNX010X)
-#include <asm/irq.h>
#include <mach/gpio.h>
#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
@@ -249,7 +246,7 @@
static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t net_interrupt(int irq, void *dev_id);
static void set_multicast_list(struct net_device *dev);
static void net_timeout(struct net_device *dev);
@@ -1367,7 +1364,7 @@
spin_lock_irqsave(&lp->lock, flags);
disable_dma(dev->dma);
clear_dma_ff(dev->dma);
- set_dma_mode(dev->dma, 0x14); /* auto_init as well */
+ set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */
set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
set_dma_count(dev->dma, lp->dmasize*1024);
enable_dma(dev->dma);
@@ -1521,7 +1518,7 @@
netif_wake_queue(dev);
}
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -1572,7 +1569,7 @@
* to restart the netdevice layer
*/
- return 0;
+ return NETDEV_TX_OK;
}
/* The typical workload of the driver:
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 1694fad..2b1aea6 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -276,6 +276,14 @@
return netdev_priv(adap->port[idx]);
}
+static inline int phy2portid(struct cphy *phy)
+{
+ struct adapter *adap = phy->adapter;
+ struct port_info *port0 = adap2pinfo(adap, 0);
+
+ return &port0->phy == phy ? 0 : 1;
+}
+
#define OFFLOAD_DEVMAP_BIT 15
#define tdev2adap(d) container_of(d, struct adapter, tdev)
@@ -301,7 +309,7 @@
void t3_free_sge_resources(struct adapter *adap);
void t3_sge_err_intr_handler(struct adapter *adapter);
irq_handler_t t3_intr_handler(struct adapter *adap, int polling);
-int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev);
int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb);
void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p);
int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
@@ -312,4 +320,6 @@
unsigned char *data);
irqreturn_t t3_sge_intr_msix(int irq, void *cookie);
+int t3_get_edc_fw(struct cphy *phy, int edc_idx, int size);
+
#endif /* __T3_ADAPTER_H__ */
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c
index 9fe008e..5248f9e 100644
--- a/drivers/net/cxgb3/ael1002.c
+++ b/drivers/net/cxgb3/ael1002.c
@@ -224,12 +224,6 @@
return t3_phy_reset(phy, MDIO_MMD_PMAPMD, wait);
}
-static int ael1006_power_down(struct cphy *phy, int enable)
-{
- return mdio_set_flag(&phy->mdio, phy->mdio.prtad, MDIO_MMD_PMAPMD,
- MDIO_CTRL1, MDIO_CTRL1_LPOWER, enable);
-}
-
static struct cphy_ops ael1006_ops = {
.reset = ael1006_reset,
.intr_enable = t3_phy_lasi_intr_enable,
@@ -237,7 +231,7 @@
.intr_clear = t3_phy_lasi_intr_clear,
.intr_handler = t3_phy_lasi_intr_handler,
.get_link_status = get_link_status_r,
- .power_down = ael1006_power_down,
+ .power_down = ael1002_power_down,
.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
};
@@ -304,279 +298,7 @@
{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5200 },
{ 0, 0, 0, 0 }
};
- static u16 sr_edc[] = {
- 0xcc00, 0x2ff4,
- 0xcc01, 0x3cd4,
- 0xcc02, 0x2015,
- 0xcc03, 0x3105,
- 0xcc04, 0x6524,
- 0xcc05, 0x27ff,
- 0xcc06, 0x300f,
- 0xcc07, 0x2c8b,
- 0xcc08, 0x300b,
- 0xcc09, 0x4009,
- 0xcc0a, 0x400e,
- 0xcc0b, 0x2f72,
- 0xcc0c, 0x3002,
- 0xcc0d, 0x1002,
- 0xcc0e, 0x2172,
- 0xcc0f, 0x3012,
- 0xcc10, 0x1002,
- 0xcc11, 0x25d2,
- 0xcc12, 0x3012,
- 0xcc13, 0x1002,
- 0xcc14, 0xd01e,
- 0xcc15, 0x27d2,
- 0xcc16, 0x3012,
- 0xcc17, 0x1002,
- 0xcc18, 0x2004,
- 0xcc19, 0x3c84,
- 0xcc1a, 0x6436,
- 0xcc1b, 0x2007,
- 0xcc1c, 0x3f87,
- 0xcc1d, 0x8676,
- 0xcc1e, 0x40b7,
- 0xcc1f, 0xa746,
- 0xcc20, 0x4047,
- 0xcc21, 0x5673,
- 0xcc22, 0x2982,
- 0xcc23, 0x3002,
- 0xcc24, 0x13d2,
- 0xcc25, 0x8bbd,
- 0xcc26, 0x2862,
- 0xcc27, 0x3012,
- 0xcc28, 0x1002,
- 0xcc29, 0x2092,
- 0xcc2a, 0x3012,
- 0xcc2b, 0x1002,
- 0xcc2c, 0x5cc3,
- 0xcc2d, 0x314,
- 0xcc2e, 0x2942,
- 0xcc2f, 0x3002,
- 0xcc30, 0x1002,
- 0xcc31, 0xd019,
- 0xcc32, 0x2032,
- 0xcc33, 0x3012,
- 0xcc34, 0x1002,
- 0xcc35, 0x2a04,
- 0xcc36, 0x3c74,
- 0xcc37, 0x6435,
- 0xcc38, 0x2fa4,
- 0xcc39, 0x3cd4,
- 0xcc3a, 0x6624,
- 0xcc3b, 0x5563,
- 0xcc3c, 0x2d42,
- 0xcc3d, 0x3002,
- 0xcc3e, 0x13d2,
- 0xcc3f, 0x464d,
- 0xcc40, 0x2862,
- 0xcc41, 0x3012,
- 0xcc42, 0x1002,
- 0xcc43, 0x2032,
- 0xcc44, 0x3012,
- 0xcc45, 0x1002,
- 0xcc46, 0x2fb4,
- 0xcc47, 0x3cd4,
- 0xcc48, 0x6624,
- 0xcc49, 0x5563,
- 0xcc4a, 0x2d42,
- 0xcc4b, 0x3002,
- 0xcc4c, 0x13d2,
- 0xcc4d, 0x2ed2,
- 0xcc4e, 0x3002,
- 0xcc4f, 0x1002,
- 0xcc50, 0x2fd2,
- 0xcc51, 0x3002,
- 0xcc52, 0x1002,
- 0xcc53, 0x004,
- 0xcc54, 0x2942,
- 0xcc55, 0x3002,
- 0xcc56, 0x1002,
- 0xcc57, 0x2092,
- 0xcc58, 0x3012,
- 0xcc59, 0x1002,
- 0xcc5a, 0x5cc3,
- 0xcc5b, 0x317,
- 0xcc5c, 0x2f72,
- 0xcc5d, 0x3002,
- 0xcc5e, 0x1002,
- 0xcc5f, 0x2942,
- 0xcc60, 0x3002,
- 0xcc61, 0x1002,
- 0xcc62, 0x22cd,
- 0xcc63, 0x301d,
- 0xcc64, 0x2862,
- 0xcc65, 0x3012,
- 0xcc66, 0x1002,
- 0xcc67, 0x2ed2,
- 0xcc68, 0x3002,
- 0xcc69, 0x1002,
- 0xcc6a, 0x2d72,
- 0xcc6b, 0x3002,
- 0xcc6c, 0x1002,
- 0xcc6d, 0x628f,
- 0xcc6e, 0x2112,
- 0xcc6f, 0x3012,
- 0xcc70, 0x1002,
- 0xcc71, 0x5aa3,
- 0xcc72, 0x2dc2,
- 0xcc73, 0x3002,
- 0xcc74, 0x1312,
- 0xcc75, 0x6f72,
- 0xcc76, 0x1002,
- 0xcc77, 0x2807,
- 0xcc78, 0x31a7,
- 0xcc79, 0x20c4,
- 0xcc7a, 0x3c24,
- 0xcc7b, 0x6724,
- 0xcc7c, 0x1002,
- 0xcc7d, 0x2807,
- 0xcc7e, 0x3187,
- 0xcc7f, 0x20c4,
- 0xcc80, 0x3c24,
- 0xcc81, 0x6724,
- 0xcc82, 0x1002,
- 0xcc83, 0x2514,
- 0xcc84, 0x3c64,
- 0xcc85, 0x6436,
- 0xcc86, 0xdff4,
- 0xcc87, 0x6436,
- 0xcc88, 0x1002,
- 0xcc89, 0x40a4,
- 0xcc8a, 0x643c,
- 0xcc8b, 0x4016,
- 0xcc8c, 0x8c6c,
- 0xcc8d, 0x2b24,
- 0xcc8e, 0x3c24,
- 0xcc8f, 0x6435,
- 0xcc90, 0x1002,
- 0xcc91, 0x2b24,
- 0xcc92, 0x3c24,
- 0xcc93, 0x643a,
- 0xcc94, 0x4025,
- 0xcc95, 0x8a5a,
- 0xcc96, 0x1002,
- 0xcc97, 0x2731,
- 0xcc98, 0x3011,
- 0xcc99, 0x1001,
- 0xcc9a, 0xc7a0,
- 0xcc9b, 0x100,
- 0xcc9c, 0xc502,
- 0xcc9d, 0x53ac,
- 0xcc9e, 0xc503,
- 0xcc9f, 0xd5d5,
- 0xcca0, 0xc600,
- 0xcca1, 0x2a6d,
- 0xcca2, 0xc601,
- 0xcca3, 0x2a4c,
- 0xcca4, 0xc602,
- 0xcca5, 0x111,
- 0xcca6, 0xc60c,
- 0xcca7, 0x5900,
- 0xcca8, 0xc710,
- 0xcca9, 0x700,
- 0xccaa, 0xc718,
- 0xccab, 0x700,
- 0xccac, 0xc720,
- 0xccad, 0x4700,
- 0xccae, 0xc801,
- 0xccaf, 0x7f50,
- 0xccb0, 0xc802,
- 0xccb1, 0x7760,
- 0xccb2, 0xc803,
- 0xccb3, 0x7fce,
- 0xccb4, 0xc804,
- 0xccb5, 0x5700,
- 0xccb6, 0xc805,
- 0xccb7, 0x5f11,
- 0xccb8, 0xc806,
- 0xccb9, 0x4751,
- 0xccba, 0xc807,
- 0xccbb, 0x57e1,
- 0xccbc, 0xc808,
- 0xccbd, 0x2700,
- 0xccbe, 0xc809,
- 0xccbf, 0x000,
- 0xccc0, 0xc821,
- 0xccc1, 0x002,
- 0xccc2, 0xc822,
- 0xccc3, 0x014,
- 0xccc4, 0xc832,
- 0xccc5, 0x1186,
- 0xccc6, 0xc847,
- 0xccc7, 0x1e02,
- 0xccc8, 0xc013,
- 0xccc9, 0xf341,
- 0xccca, 0xc01a,
- 0xcccb, 0x446,
- 0xcccc, 0xc024,
- 0xcccd, 0x1000,
- 0xccce, 0xc025,
- 0xcccf, 0xa00,
- 0xccd0, 0xc026,
- 0xccd1, 0xc0c,
- 0xccd2, 0xc027,
- 0xccd3, 0xc0c,
- 0xccd4, 0xc029,
- 0xccd5, 0x0a0,
- 0xccd6, 0xc030,
- 0xccd7, 0xa00,
- 0xccd8, 0xc03c,
- 0xccd9, 0x01c,
- 0xccda, 0xc005,
- 0xccdb, 0x7a06,
- 0xccdc, 0x000,
- 0xccdd, 0x2731,
- 0xccde, 0x3011,
- 0xccdf, 0x1001,
- 0xcce0, 0xc620,
- 0xcce1, 0x000,
- 0xcce2, 0xc621,
- 0xcce3, 0x03f,
- 0xcce4, 0xc622,
- 0xcce5, 0x000,
- 0xcce6, 0xc623,
- 0xcce7, 0x000,
- 0xcce8, 0xc624,
- 0xcce9, 0x000,
- 0xccea, 0xc625,
- 0xcceb, 0x000,
- 0xccec, 0xc627,
- 0xcced, 0x000,
- 0xccee, 0xc628,
- 0xccef, 0x000,
- 0xccf0, 0xc62c,
- 0xccf1, 0x000,
- 0xccf2, 0x000,
- 0xccf3, 0x2806,
- 0xccf4, 0x3cb6,
- 0xccf5, 0xc161,
- 0xccf6, 0x6134,
- 0xccf7, 0x6135,
- 0xccf8, 0x5443,
- 0xccf9, 0x303,
- 0xccfa, 0x6524,
- 0xccfb, 0x00b,
- 0xccfc, 0x1002,
- 0xccfd, 0x2104,
- 0xccfe, 0x3c24,
- 0xccff, 0x2105,
- 0xcd00, 0x3805,
- 0xcd01, 0x6524,
- 0xcd02, 0xdff4,
- 0xcd03, 0x4005,
- 0xcd04, 0x6524,
- 0xcd05, 0x1002,
- 0xcd06, 0x5dd3,
- 0xcd07, 0x306,
- 0xcd08, 0x2ff7,
- 0xcd09, 0x38f7,
- 0xcd0a, 0x60b7,
- 0xcd0b, 0xdffd,
- 0xcd0c, 0x00a,
- 0xcd0d, 0x1002,
- 0xcd0e, 0
- };
+
int i, err;
err = set_phy_regs(phy, regs);
@@ -585,9 +307,16 @@
msleep(50);
- for (i = 0; i < ARRAY_SIZE(sr_edc) && !err; i += 2)
- err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, sr_edc[i],
- sr_edc[i + 1]);
+ if (phy->priv != edc_sr)
+ err = t3_get_edc_fw(phy, EDC_OPT_AEL2005,
+ EDC_OPT_AEL2005_SIZE);
+ if (err)
+ return err;
+
+ for (i = 0; i < EDC_OPT_AEL2005_SIZE / sizeof(u16) && !err; i += 2)
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+ phy->phy_cache[i],
+ phy->phy_cache[i + 1]);
if (!err)
phy->priv = edc_sr;
return err;
@@ -604,374 +333,6 @@
{ MDIO_MMD_PMAPMD, 0xc015, 0xffff, 0xa000 },
{ 0, 0, 0, 0 }
};
- static u16 twinax_edc[] = {
- 0xcc00, 0x4009,
- 0xcc01, 0x27ff,
- 0xcc02, 0x300f,
- 0xcc03, 0x40aa,
- 0xcc04, 0x401c,
- 0xcc05, 0x401e,
- 0xcc06, 0x2ff4,
- 0xcc07, 0x3cd4,
- 0xcc08, 0x2035,
- 0xcc09, 0x3145,
- 0xcc0a, 0x6524,
- 0xcc0b, 0x26a2,
- 0xcc0c, 0x3012,
- 0xcc0d, 0x1002,
- 0xcc0e, 0x29c2,
- 0xcc0f, 0x3002,
- 0xcc10, 0x1002,
- 0xcc11, 0x2072,
- 0xcc12, 0x3012,
- 0xcc13, 0x1002,
- 0xcc14, 0x22cd,
- 0xcc15, 0x301d,
- 0xcc16, 0x2e52,
- 0xcc17, 0x3012,
- 0xcc18, 0x1002,
- 0xcc19, 0x28e2,
- 0xcc1a, 0x3002,
- 0xcc1b, 0x1002,
- 0xcc1c, 0x628f,
- 0xcc1d, 0x2ac2,
- 0xcc1e, 0x3012,
- 0xcc1f, 0x1002,
- 0xcc20, 0x5553,
- 0xcc21, 0x2ae2,
- 0xcc22, 0x3002,
- 0xcc23, 0x1302,
- 0xcc24, 0x401e,
- 0xcc25, 0x2be2,
- 0xcc26, 0x3012,
- 0xcc27, 0x1002,
- 0xcc28, 0x2da2,
- 0xcc29, 0x3012,
- 0xcc2a, 0x1002,
- 0xcc2b, 0x2ba2,
- 0xcc2c, 0x3002,
- 0xcc2d, 0x1002,
- 0xcc2e, 0x5ee3,
- 0xcc2f, 0x305,
- 0xcc30, 0x400e,
- 0xcc31, 0x2bc2,
- 0xcc32, 0x3002,
- 0xcc33, 0x1002,
- 0xcc34, 0x2b82,
- 0xcc35, 0x3012,
- 0xcc36, 0x1002,
- 0xcc37, 0x5663,
- 0xcc38, 0x302,
- 0xcc39, 0x401e,
- 0xcc3a, 0x6f72,
- 0xcc3b, 0x1002,
- 0xcc3c, 0x628f,
- 0xcc3d, 0x2be2,
- 0xcc3e, 0x3012,
- 0xcc3f, 0x1002,
- 0xcc40, 0x22cd,
- 0xcc41, 0x301d,
- 0xcc42, 0x2e52,
- 0xcc43, 0x3012,
- 0xcc44, 0x1002,
- 0xcc45, 0x2522,
- 0xcc46, 0x3012,
- 0xcc47, 0x1002,
- 0xcc48, 0x2da2,
- 0xcc49, 0x3012,
- 0xcc4a, 0x1002,
- 0xcc4b, 0x2ca2,
- 0xcc4c, 0x3012,
- 0xcc4d, 0x1002,
- 0xcc4e, 0x2fa4,
- 0xcc4f, 0x3cd4,
- 0xcc50, 0x6624,
- 0xcc51, 0x410b,
- 0xcc52, 0x56b3,
- 0xcc53, 0x3c4,
- 0xcc54, 0x2fb2,
- 0xcc55, 0x3002,
- 0xcc56, 0x1002,
- 0xcc57, 0x220b,
- 0xcc58, 0x303b,
- 0xcc59, 0x56b3,
- 0xcc5a, 0x3c3,
- 0xcc5b, 0x866b,
- 0xcc5c, 0x400c,
- 0xcc5d, 0x23a2,
- 0xcc5e, 0x3012,
- 0xcc5f, 0x1002,
- 0xcc60, 0x2da2,
- 0xcc61, 0x3012,
- 0xcc62, 0x1002,
- 0xcc63, 0x2ca2,
- 0xcc64, 0x3012,
- 0xcc65, 0x1002,
- 0xcc66, 0x2fb4,
- 0xcc67, 0x3cd4,
- 0xcc68, 0x6624,
- 0xcc69, 0x56b3,
- 0xcc6a, 0x3c3,
- 0xcc6b, 0x866b,
- 0xcc6c, 0x401c,
- 0xcc6d, 0x2205,
- 0xcc6e, 0x3035,
- 0xcc6f, 0x5b53,
- 0xcc70, 0x2c52,
- 0xcc71, 0x3002,
- 0xcc72, 0x13c2,
- 0xcc73, 0x5cc3,
- 0xcc74, 0x317,
- 0xcc75, 0x2522,
- 0xcc76, 0x3012,
- 0xcc77, 0x1002,
- 0xcc78, 0x2da2,
- 0xcc79, 0x3012,
- 0xcc7a, 0x1002,
- 0xcc7b, 0x2b82,
- 0xcc7c, 0x3012,
- 0xcc7d, 0x1002,
- 0xcc7e, 0x5663,
- 0xcc7f, 0x303,
- 0xcc80, 0x401e,
- 0xcc81, 0x004,
- 0xcc82, 0x2c42,
- 0xcc83, 0x3012,
- 0xcc84, 0x1002,
- 0xcc85, 0x6f72,
- 0xcc86, 0x1002,
- 0xcc87, 0x628f,
- 0xcc88, 0x2304,
- 0xcc89, 0x3c84,
- 0xcc8a, 0x6436,
- 0xcc8b, 0xdff4,
- 0xcc8c, 0x6436,
- 0xcc8d, 0x2ff5,
- 0xcc8e, 0x3005,
- 0xcc8f, 0x8656,
- 0xcc90, 0xdfba,
- 0xcc91, 0x56a3,
- 0xcc92, 0xd05a,
- 0xcc93, 0x21c2,
- 0xcc94, 0x3012,
- 0xcc95, 0x1392,
- 0xcc96, 0xd05a,
- 0xcc97, 0x56a3,
- 0xcc98, 0xdfba,
- 0xcc99, 0x383,
- 0xcc9a, 0x6f72,
- 0xcc9b, 0x1002,
- 0xcc9c, 0x28c5,
- 0xcc9d, 0x3005,
- 0xcc9e, 0x4178,
- 0xcc9f, 0x5653,
- 0xcca0, 0x384,
- 0xcca1, 0x22b2,
- 0xcca2, 0x3012,
- 0xcca3, 0x1002,
- 0xcca4, 0x2be5,
- 0xcca5, 0x3005,
- 0xcca6, 0x41e8,
- 0xcca7, 0x5653,
- 0xcca8, 0x382,
- 0xcca9, 0x002,
- 0xccaa, 0x4258,
- 0xccab, 0x2474,
- 0xccac, 0x3c84,
- 0xccad, 0x6437,
- 0xccae, 0xdff4,
- 0xccaf, 0x6437,
- 0xccb0, 0x2ff5,
- 0xccb1, 0x3c05,
- 0xccb2, 0x8757,
- 0xccb3, 0xb888,
- 0xccb4, 0x9787,
- 0xccb5, 0xdff4,
- 0xccb6, 0x6724,
- 0xccb7, 0x866a,
- 0xccb8, 0x6f72,
- 0xccb9, 0x1002,
- 0xccba, 0x2d01,
- 0xccbb, 0x3011,
- 0xccbc, 0x1001,
- 0xccbd, 0xc620,
- 0xccbe, 0x14e5,
- 0xccbf, 0xc621,
- 0xccc0, 0xc53d,
- 0xccc1, 0xc622,
- 0xccc2, 0x3cbe,
- 0xccc3, 0xc623,
- 0xccc4, 0x4452,
- 0xccc5, 0xc624,
- 0xccc6, 0xc5c5,
- 0xccc7, 0xc625,
- 0xccc8, 0xe01e,
- 0xccc9, 0xc627,
- 0xccca, 0x000,
- 0xcccb, 0xc628,
- 0xcccc, 0x000,
- 0xcccd, 0xc62b,
- 0xccce, 0x000,
- 0xcccf, 0xc62c,
- 0xccd0, 0x000,
- 0xccd1, 0x000,
- 0xccd2, 0x2d01,
- 0xccd3, 0x3011,
- 0xccd4, 0x1001,
- 0xccd5, 0xc620,
- 0xccd6, 0x000,
- 0xccd7, 0xc621,
- 0xccd8, 0x000,
- 0xccd9, 0xc622,
- 0xccda, 0x0ce,
- 0xccdb, 0xc623,
- 0xccdc, 0x07f,
- 0xccdd, 0xc624,
- 0xccde, 0x032,
- 0xccdf, 0xc625,
- 0xcce0, 0x000,
- 0xcce1, 0xc627,
- 0xcce2, 0x000,
- 0xcce3, 0xc628,
- 0xcce4, 0x000,
- 0xcce5, 0xc62b,
- 0xcce6, 0x000,
- 0xcce7, 0xc62c,
- 0xcce8, 0x000,
- 0xcce9, 0x000,
- 0xccea, 0x2d01,
- 0xcceb, 0x3011,
- 0xccec, 0x1001,
- 0xcced, 0xc502,
- 0xccee, 0x609f,
- 0xccef, 0xc600,
- 0xccf0, 0x2a6e,
- 0xccf1, 0xc601,
- 0xccf2, 0x2a2c,
- 0xccf3, 0xc60c,
- 0xccf4, 0x5400,
- 0xccf5, 0xc710,
- 0xccf6, 0x700,
- 0xccf7, 0xc718,
- 0xccf8, 0x700,
- 0xccf9, 0xc720,
- 0xccfa, 0x4700,
- 0xccfb, 0xc728,
- 0xccfc, 0x700,
- 0xccfd, 0xc729,
- 0xccfe, 0x1207,
- 0xccff, 0xc801,
- 0xcd00, 0x7f50,
- 0xcd01, 0xc802,
- 0xcd02, 0x7760,
- 0xcd03, 0xc803,
- 0xcd04, 0x7fce,
- 0xcd05, 0xc804,
- 0xcd06, 0x520e,
- 0xcd07, 0xc805,
- 0xcd08, 0x5c11,
- 0xcd09, 0xc806,
- 0xcd0a, 0x3c51,
- 0xcd0b, 0xc807,
- 0xcd0c, 0x4061,
- 0xcd0d, 0xc808,
- 0xcd0e, 0x49c1,
- 0xcd0f, 0xc809,
- 0xcd10, 0x3840,
- 0xcd11, 0xc80a,
- 0xcd12, 0x000,
- 0xcd13, 0xc821,
- 0xcd14, 0x002,
- 0xcd15, 0xc822,
- 0xcd16, 0x046,
- 0xcd17, 0xc844,
- 0xcd18, 0x182f,
- 0xcd19, 0xc013,
- 0xcd1a, 0xf341,
- 0xcd1b, 0xc01a,
- 0xcd1c, 0x446,
- 0xcd1d, 0xc024,
- 0xcd1e, 0x1000,
- 0xcd1f, 0xc025,
- 0xcd20, 0xa00,
- 0xcd21, 0xc026,
- 0xcd22, 0xc0c,
- 0xcd23, 0xc027,
- 0xcd24, 0xc0c,
- 0xcd25, 0xc029,
- 0xcd26, 0x0a0,
- 0xcd27, 0xc030,
- 0xcd28, 0xa00,
- 0xcd29, 0xc03c,
- 0xcd2a, 0x01c,
- 0xcd2b, 0x000,
- 0xcd2c, 0x2b84,
- 0xcd2d, 0x3c74,
- 0xcd2e, 0x6435,
- 0xcd2f, 0xdff4,
- 0xcd30, 0x6435,
- 0xcd31, 0x2806,
- 0xcd32, 0x3006,
- 0xcd33, 0x8565,
- 0xcd34, 0x2b24,
- 0xcd35, 0x3c24,
- 0xcd36, 0x6436,
- 0xcd37, 0x1002,
- 0xcd38, 0x2b24,
- 0xcd39, 0x3c24,
- 0xcd3a, 0x6436,
- 0xcd3b, 0x4045,
- 0xcd3c, 0x8656,
- 0xcd3d, 0x1002,
- 0xcd3e, 0x2807,
- 0xcd3f, 0x31a7,
- 0xcd40, 0x20c4,
- 0xcd41, 0x3c24,
- 0xcd42, 0x6724,
- 0xcd43, 0x1002,
- 0xcd44, 0x2807,
- 0xcd45, 0x3187,
- 0xcd46, 0x20c4,
- 0xcd47, 0x3c24,
- 0xcd48, 0x6724,
- 0xcd49, 0x1002,
- 0xcd4a, 0x2514,
- 0xcd4b, 0x3c64,
- 0xcd4c, 0x6436,
- 0xcd4d, 0xdff4,
- 0xcd4e, 0x6436,
- 0xcd4f, 0x1002,
- 0xcd50, 0x2806,
- 0xcd51, 0x3cb6,
- 0xcd52, 0xc161,
- 0xcd53, 0x6134,
- 0xcd54, 0x6135,
- 0xcd55, 0x5443,
- 0xcd56, 0x303,
- 0xcd57, 0x6524,
- 0xcd58, 0x00b,
- 0xcd59, 0x1002,
- 0xcd5a, 0xd019,
- 0xcd5b, 0x2104,
- 0xcd5c, 0x3c24,
- 0xcd5d, 0x2105,
- 0xcd5e, 0x3805,
- 0xcd5f, 0x6524,
- 0xcd60, 0xdff4,
- 0xcd61, 0x4005,
- 0xcd62, 0x6524,
- 0xcd63, 0x2e8d,
- 0xcd64, 0x303d,
- 0xcd65, 0x5dd3,
- 0xcd66, 0x306,
- 0xcd67, 0x2ff7,
- 0xcd68, 0x38f7,
- 0xcd69, 0x60b7,
- 0xcd6a, 0xdffd,
- 0xcd6b, 0x00a,
- 0xcd6c, 0x1002,
- 0xcd6d, 0
- };
int i, err;
err = set_phy_regs(phy, regs);
@@ -982,9 +343,16 @@
msleep(50);
- for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2)
- err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i],
- twinax_edc[i + 1]);
+ if (phy->priv != edc_twinax)
+ err = t3_get_edc_fw(phy, EDC_TWX_AEL2005,
+ EDC_TWX_AEL2005_SIZE);
+ if (err)
+ return err;
+
+ for (i = 0; i < EDC_TWX_AEL2005_SIZE / sizeof(u16) && !err; i += 2)
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+ phy->phy_cache[i],
+ phy->phy_cache[i + 1]);
if (!err)
phy->priv = edc_twinax;
return err;
@@ -1201,405 +569,6 @@
{ MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 },
{ 0, 0, 0, 0 }
};
-
- /* TWINAX EDC firmware */
- static u16 twinax_edc[] = {
- 0xd800, 0x4009,
- 0xd801, 0x2fff,
- 0xd802, 0x300f,
- 0xd803, 0x40aa,
- 0xd804, 0x401c,
- 0xd805, 0x401e,
- 0xd806, 0x2ff4,
- 0xd807, 0x3dc4,
- 0xd808, 0x2035,
- 0xd809, 0x3035,
- 0xd80a, 0x6524,
- 0xd80b, 0x2cb2,
- 0xd80c, 0x3012,
- 0xd80d, 0x1002,
- 0xd80e, 0x26e2,
- 0xd80f, 0x3022,
- 0xd810, 0x1002,
- 0xd811, 0x27d2,
- 0xd812, 0x3022,
- 0xd813, 0x1002,
- 0xd814, 0x2822,
- 0xd815, 0x3012,
- 0xd816, 0x1002,
- 0xd817, 0x2492,
- 0xd818, 0x3022,
- 0xd819, 0x1002,
- 0xd81a, 0x2772,
- 0xd81b, 0x3012,
- 0xd81c, 0x1002,
- 0xd81d, 0x23d2,
- 0xd81e, 0x3022,
- 0xd81f, 0x1002,
- 0xd820, 0x22cd,
- 0xd821, 0x301d,
- 0xd822, 0x27f2,
- 0xd823, 0x3022,
- 0xd824, 0x1002,
- 0xd825, 0x5553,
- 0xd826, 0x0307,
- 0xd827, 0x2522,
- 0xd828, 0x3022,
- 0xd829, 0x1002,
- 0xd82a, 0x2142,
- 0xd82b, 0x3012,
- 0xd82c, 0x1002,
- 0xd82d, 0x4016,
- 0xd82e, 0x5e63,
- 0xd82f, 0x0344,
- 0xd830, 0x2142,
- 0xd831, 0x3012,
- 0xd832, 0x1002,
- 0xd833, 0x400e,
- 0xd834, 0x2522,
- 0xd835, 0x3022,
- 0xd836, 0x1002,
- 0xd837, 0x2b52,
- 0xd838, 0x3012,
- 0xd839, 0x1002,
- 0xd83a, 0x2742,
- 0xd83b, 0x3022,
- 0xd83c, 0x1002,
- 0xd83d, 0x25e2,
- 0xd83e, 0x3022,
- 0xd83f, 0x1002,
- 0xd840, 0x2fa4,
- 0xd841, 0x3dc4,
- 0xd842, 0x6624,
- 0xd843, 0x414b,
- 0xd844, 0x56b3,
- 0xd845, 0x03c6,
- 0xd846, 0x866b,
- 0xd847, 0x400c,
- 0xd848, 0x2712,
- 0xd849, 0x3012,
- 0xd84a, 0x1002,
- 0xd84b, 0x2c4b,
- 0xd84c, 0x309b,
- 0xd84d, 0x56b3,
- 0xd84e, 0x03c3,
- 0xd84f, 0x866b,
- 0xd850, 0x400c,
- 0xd851, 0x2272,
- 0xd852, 0x3022,
- 0xd853, 0x1002,
- 0xd854, 0x2742,
- 0xd855, 0x3022,
- 0xd856, 0x1002,
- 0xd857, 0x25e2,
- 0xd858, 0x3022,
- 0xd859, 0x1002,
- 0xd85a, 0x2fb4,
- 0xd85b, 0x3dc4,
- 0xd85c, 0x6624,
- 0xd85d, 0x56b3,
- 0xd85e, 0x03c3,
- 0xd85f, 0x866b,
- 0xd860, 0x401c,
- 0xd861, 0x2c45,
- 0xd862, 0x3095,
- 0xd863, 0x5b53,
- 0xd864, 0x2372,
- 0xd865, 0x3012,
- 0xd866, 0x13c2,
- 0xd867, 0x5cc3,
- 0xd868, 0x2712,
- 0xd869, 0x3012,
- 0xd86a, 0x1312,
- 0xd86b, 0x2b52,
- 0xd86c, 0x3012,
- 0xd86d, 0x1002,
- 0xd86e, 0x2742,
- 0xd86f, 0x3022,
- 0xd870, 0x1002,
- 0xd871, 0x2582,
- 0xd872, 0x3022,
- 0xd873, 0x1002,
- 0xd874, 0x2142,
- 0xd875, 0x3012,
- 0xd876, 0x1002,
- 0xd877, 0x628f,
- 0xd878, 0x2985,
- 0xd879, 0x33a5,
- 0xd87a, 0x25e2,
- 0xd87b, 0x3022,
- 0xd87c, 0x1002,
- 0xd87d, 0x5653,
- 0xd87e, 0x03d2,
- 0xd87f, 0x401e,
- 0xd880, 0x6f72,
- 0xd881, 0x1002,
- 0xd882, 0x628f,
- 0xd883, 0x2304,
- 0xd884, 0x3c84,
- 0xd885, 0x6436,
- 0xd886, 0xdff4,
- 0xd887, 0x6436,
- 0xd888, 0x2ff5,
- 0xd889, 0x3005,
- 0xd88a, 0x8656,
- 0xd88b, 0xdfba,
- 0xd88c, 0x56a3,
- 0xd88d, 0xd05a,
- 0xd88e, 0x2972,
- 0xd88f, 0x3012,
- 0xd890, 0x1392,
- 0xd891, 0xd05a,
- 0xd892, 0x56a3,
- 0xd893, 0xdfba,
- 0xd894, 0x0383,
- 0xd895, 0x6f72,
- 0xd896, 0x1002,
- 0xd897, 0x2b45,
- 0xd898, 0x3005,
- 0xd899, 0x4178,
- 0xd89a, 0x5653,
- 0xd89b, 0x0384,
- 0xd89c, 0x2a62,
- 0xd89d, 0x3012,
- 0xd89e, 0x1002,
- 0xd89f, 0x2f05,
- 0xd8a0, 0x3005,
- 0xd8a1, 0x41c8,
- 0xd8a2, 0x5653,
- 0xd8a3, 0x0382,
- 0xd8a4, 0x0002,
- 0xd8a5, 0x4218,
- 0xd8a6, 0x2474,
- 0xd8a7, 0x3c84,
- 0xd8a8, 0x6437,
- 0xd8a9, 0xdff4,
- 0xd8aa, 0x6437,
- 0xd8ab, 0x2ff5,
- 0xd8ac, 0x3c05,
- 0xd8ad, 0x8757,
- 0xd8ae, 0xb888,
- 0xd8af, 0x9787,
- 0xd8b0, 0xdff4,
- 0xd8b1, 0x6724,
- 0xd8b2, 0x866a,
- 0xd8b3, 0x6f72,
- 0xd8b4, 0x1002,
- 0xd8b5, 0x2641,
- 0xd8b6, 0x3021,
- 0xd8b7, 0x1001,
- 0xd8b8, 0xc620,
- 0xd8b9, 0x0000,
- 0xd8ba, 0xc621,
- 0xd8bb, 0x0000,
- 0xd8bc, 0xc622,
- 0xd8bd, 0x00ce,
- 0xd8be, 0xc623,
- 0xd8bf, 0x007f,
- 0xd8c0, 0xc624,
- 0xd8c1, 0x0032,
- 0xd8c2, 0xc625,
- 0xd8c3, 0x0000,
- 0xd8c4, 0xc627,
- 0xd8c5, 0x0000,
- 0xd8c6, 0xc628,
- 0xd8c7, 0x0000,
- 0xd8c8, 0xc62c,
- 0xd8c9, 0x0000,
- 0xd8ca, 0x0000,
- 0xd8cb, 0x2641,
- 0xd8cc, 0x3021,
- 0xd8cd, 0x1001,
- 0xd8ce, 0xc502,
- 0xd8cf, 0x53ac,
- 0xd8d0, 0xc503,
- 0xd8d1, 0x2cd3,
- 0xd8d2, 0xc600,
- 0xd8d3, 0x2a6e,
- 0xd8d4, 0xc601,
- 0xd8d5, 0x2a2c,
- 0xd8d6, 0xc605,
- 0xd8d7, 0x5557,
- 0xd8d8, 0xc60c,
- 0xd8d9, 0x5400,
- 0xd8da, 0xc710,
- 0xd8db, 0x0700,
- 0xd8dc, 0xc711,
- 0xd8dd, 0x0f06,
- 0xd8de, 0xc718,
- 0xd8df, 0x0700,
- 0xd8e0, 0xc719,
- 0xd8e1, 0x0f06,
- 0xd8e2, 0xc720,
- 0xd8e3, 0x4700,
- 0xd8e4, 0xc721,
- 0xd8e5, 0x0f06,
- 0xd8e6, 0xc728,
- 0xd8e7, 0x0700,
- 0xd8e8, 0xc729,
- 0xd8e9, 0x1207,
- 0xd8ea, 0xc801,
- 0xd8eb, 0x7f50,
- 0xd8ec, 0xc802,
- 0xd8ed, 0x7760,
- 0xd8ee, 0xc803,
- 0xd8ef, 0x7fce,
- 0xd8f0, 0xc804,
- 0xd8f1, 0x520e,
- 0xd8f2, 0xc805,
- 0xd8f3, 0x5c11,
- 0xd8f4, 0xc806,
- 0xd8f5, 0x3c51,
- 0xd8f6, 0xc807,
- 0xd8f7, 0x4061,
- 0xd8f8, 0xc808,
- 0xd8f9, 0x49c1,
- 0xd8fa, 0xc809,
- 0xd8fb, 0x3840,
- 0xd8fc, 0xc80a,
- 0xd8fd, 0x0000,
- 0xd8fe, 0xc821,
- 0xd8ff, 0x0002,
- 0xd900, 0xc822,
- 0xd901, 0x0046,
- 0xd902, 0xc844,
- 0xd903, 0x182f,
- 0xd904, 0xc013,
- 0xd905, 0xf341,
- 0xd906, 0xc084,
- 0xd907, 0x0030,
- 0xd908, 0xc904,
- 0xd909, 0x1401,
- 0xd90a, 0xcb0c,
- 0xd90b, 0x0004,
- 0xd90c, 0xcb0e,
- 0xd90d, 0xa00a,
- 0xd90e, 0xcb0f,
- 0xd90f, 0xc0c0,
- 0xd910, 0xcb10,
- 0xd911, 0xc0c0,
- 0xd912, 0xcb11,
- 0xd913, 0x00a0,
- 0xd914, 0xcb12,
- 0xd915, 0x0007,
- 0xd916, 0xc241,
- 0xd917, 0xa000,
- 0xd918, 0xc243,
- 0xd919, 0x7fe0,
- 0xd91a, 0xc604,
- 0xd91b, 0x000e,
- 0xd91c, 0xc609,
- 0xd91d, 0x00f5,
- 0xd91e, 0xc611,
- 0xd91f, 0x000e,
- 0xd920, 0xc660,
- 0xd921, 0x9600,
- 0xd922, 0xc687,
- 0xd923, 0x0004,
- 0xd924, 0xc60a,
- 0xd925, 0x04f5,
- 0xd926, 0x0000,
- 0xd927, 0x2641,
- 0xd928, 0x3021,
- 0xd929, 0x1001,
- 0xd92a, 0xc620,
- 0xd92b, 0x14e5,
- 0xd92c, 0xc621,
- 0xd92d, 0xc53d,
- 0xd92e, 0xc622,
- 0xd92f, 0x3cbe,
- 0xd930, 0xc623,
- 0xd931, 0x4452,
- 0xd932, 0xc624,
- 0xd933, 0xc5c5,
- 0xd934, 0xc625,
- 0xd935, 0xe01e,
- 0xd936, 0xc627,
- 0xd937, 0x0000,
- 0xd938, 0xc628,
- 0xd939, 0x0000,
- 0xd93a, 0xc62c,
- 0xd93b, 0x0000,
- 0xd93c, 0x0000,
- 0xd93d, 0x2b84,
- 0xd93e, 0x3c74,
- 0xd93f, 0x6435,
- 0xd940, 0xdff4,
- 0xd941, 0x6435,
- 0xd942, 0x2806,
- 0xd943, 0x3006,
- 0xd944, 0x8565,
- 0xd945, 0x2b24,
- 0xd946, 0x3c24,
- 0xd947, 0x6436,
- 0xd948, 0x1002,
- 0xd949, 0x2b24,
- 0xd94a, 0x3c24,
- 0xd94b, 0x6436,
- 0xd94c, 0x4045,
- 0xd94d, 0x8656,
- 0xd94e, 0x5663,
- 0xd94f, 0x0302,
- 0xd950, 0x401e,
- 0xd951, 0x1002,
- 0xd952, 0x2807,
- 0xd953, 0x31a7,
- 0xd954, 0x20c4,
- 0xd955, 0x3c24,
- 0xd956, 0x6724,
- 0xd957, 0x1002,
- 0xd958, 0x2807,
- 0xd959, 0x3187,
- 0xd95a, 0x20c4,
- 0xd95b, 0x3c24,
- 0xd95c, 0x6724,
- 0xd95d, 0x1002,
- 0xd95e, 0x24f4,
- 0xd95f, 0x3c64,
- 0xd960, 0x6436,
- 0xd961, 0xdff4,
- 0xd962, 0x6436,
- 0xd963, 0x1002,
- 0xd964, 0x2006,
- 0xd965, 0x3d76,
- 0xd966, 0xc161,
- 0xd967, 0x6134,
- 0xd968, 0x6135,
- 0xd969, 0x5443,
- 0xd96a, 0x0303,
- 0xd96b, 0x6524,
- 0xd96c, 0x00fb,
- 0xd96d, 0x1002,
- 0xd96e, 0x20d4,
- 0xd96f, 0x3c24,
- 0xd970, 0x2025,
- 0xd971, 0x3005,
- 0xd972, 0x6524,
- 0xd973, 0x1002,
- 0xd974, 0xd019,
- 0xd975, 0x2104,
- 0xd976, 0x3c24,
- 0xd977, 0x2105,
- 0xd978, 0x3805,
- 0xd979, 0x6524,
- 0xd97a, 0xdff4,
- 0xd97b, 0x4005,
- 0xd97c, 0x6524,
- 0xd97d, 0x2e8d,
- 0xd97e, 0x303d,
- 0xd97f, 0x2408,
- 0xd980, 0x35d8,
- 0xd981, 0x5dd3,
- 0xd982, 0x0307,
- 0xd983, 0x8887,
- 0xd984, 0x63a7,
- 0xd985, 0x8887,
- 0xd986, 0x63a7,
- 0xd987, 0xdffd,
- 0xd988, 0x00f9,
- 0xd989, 0x1002,
- 0xd98a, 0x0000,
- };
int i, err;
/* set uC clock and activate it */
@@ -1612,10 +581,16 @@
if (err)
return err;
- /* write TWINAX EDC firmware into PHY */
- for (i = 0; i < ARRAY_SIZE(twinax_edc) && !err; i += 2)
- err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, twinax_edc[i],
- twinax_edc[i + 1]);
+ if (phy->priv != edc_twinax)
+ err = t3_get_edc_fw(phy, EDC_TWX_AEL2020,
+ EDC_TWX_AEL2020_SIZE);
+ if (err)
+ return err;
+
+ for (i = 0; i < EDC_TWX_AEL2020_SIZE / sizeof(u16) && !err; i += 2)
+ err = t3_mdio_write(phy, MDIO_MMD_PMAPMD,
+ phy->phy_cache[i],
+ phy->phy_cache[i + 1]);
/* activate uC */
err = set_phy_regs(phy, uCactivate);
if (!err)
@@ -1649,9 +624,39 @@
*/
static int ael2020_intr_enable(struct cphy *phy)
{
- int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
- 0x2 << (AEL2020_GPIO_MODDET*4));
- return err ? err : t3_phy_lasi_intr_enable(phy);
+ struct reg_val regs[] = {
+ /* output Module's Loss Of Signal (LOS) to LED */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
+ 0xffff, 0x4 },
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) },
+
+ /* enable module detect status change interrupts */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0x2 << (AEL2020_GPIO_MODDET*4) },
+
+ /* end */
+ { 0, 0, 0, 0 }
+ };
+ int err, link_ok = 0;
+
+ /* set up "link status" LED and enable module change interrupts */
+ err = set_phy_regs(phy, regs);
+ if (err)
+ return err;
+
+ err = get_link_status_r(phy, &link_ok, NULL, NULL, NULL);
+ if (err)
+ return err;
+ if (link_ok)
+ t3_link_changed(phy->adapter,
+ phy2portid(phy));
+
+ err = t3_phy_lasi_intr_enable(phy);
+ if (err)
+ return err;
+
+ return 0;
}
/*
@@ -1659,9 +664,26 @@
*/
static int ael2020_intr_disable(struct cphy *phy)
{
- int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
- 0x1 << (AEL2020_GPIO_MODDET*4));
- return err ? err : t3_phy_lasi_intr_disable(phy);
+ struct reg_val regs[] = {
+ /* reset "link status" LED to "off" */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0xb << (AEL2020_GPIO_LSTAT*4) },
+
+ /* disable module detect status change interrupts */
+ { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
+ 0xffff, 0x1 << (AEL2020_GPIO_MODDET*4) },
+
+ /* end */
+ { 0, 0, 0, 0 }
+ };
+ int err;
+
+ /* turn off "link status" LED and disable module change interrupts */
+ err = set_phy_regs(phy, regs);
+ if (err)
+ return err;
+
+ return t3_phy_lasi_intr_disable(phy);
}
/*
@@ -1679,31 +701,26 @@
return err ? err : t3_phy_lasi_intr_clear(phy);
}
+static struct reg_val ael2020_reset_regs[] = {
+ /* Erratum #2: CDRLOL asserted, causing PMA link down status */
+ { MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
+
+ /* force XAUI to send LF when RX_LOS is asserted */
+ { MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 },
+
+ /* allow writes to transceiver module EEPROM on i2c bus */
+ { MDIO_MMD_PMAPMD, 0xff02, 0xffff, 0x0023 },
+ { MDIO_MMD_PMAPMD, 0xff03, 0xffff, 0x0000 },
+ { MDIO_MMD_PMAPMD, 0xff04, 0xffff, 0x0000 },
+
+ /* end */
+ { 0, 0, 0, 0 }
+};
/*
* Reset the PHY and put it into a canonical operating state.
*/
static int ael2020_reset(struct cphy *phy, int wait)
{
- static struct reg_val regs0[] = {
- /* Erratum #2: CDRLOL asserted, causing PMA link down status */
- { MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
-
- /* force XAUI to send LF when RX_LOS is asserted */
- { MDIO_MMD_PMAPMD, 0xcd40, 0xffff, 0x0001 },
-
- /* RX_LOS pin is active high */
- { MDIO_MMD_PMAPMD, AEL_OPT_SETTINGS,
- 0x0020, 0x0020 },
-
- /* output Module's Loss Of Signal (LOS) to LED */
- { MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
- 0xffff, 0x0004 },
- { MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
- 0xffff, 0x8 << (AEL2020_GPIO_LSTAT*4) },
-
- /* end */
- { 0, 0, 0, 0 }
- };
int err;
unsigned int lasi_ctrl;
@@ -1720,7 +737,7 @@
/* basic initialization for all module types */
phy->priv = edc_none;
- err = set_phy_regs(phy, regs0);
+ err = set_phy_regs(phy, ael2020_reset_regs);
if (err)
return err;
@@ -1798,10 +815,16 @@
int t3_ael2020_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
const struct mdio_ops *mdio_ops)
{
+ int err;
+
cphy_init(phy, adapter, phy_addr, &ael2020_ops, mdio_ops,
SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE |
SUPPORTED_IRQ, "10GBASE-R");
msleep(125);
+
+ err = set_phy_regs(phy, ael2020_reset_regs);
+ if (err)
+ return err;
return 0;
}
@@ -1840,7 +863,7 @@
.intr_clear = t3_phy_lasi_intr_clear,
.intr_handler = t3_phy_lasi_intr_handler,
.get_link_status = get_link_status_x,
- .power_down = ael1006_power_down,
+ .power_down = ael1002_power_down,
.mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
};
diff --git a/drivers/net/cxgb3/aq100x.c b/drivers/net/cxgb3/aq100x.c
index b1fd5bf..341b7ef 100644
--- a/drivers/net/cxgb3/aq100x.c
+++ b/drivers/net/cxgb3/aq100x.c
@@ -271,7 +271,8 @@
cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops,
SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full |
- SUPPORTED_Autoneg | SUPPORTED_AUI, "1000/10GBASE-T");
+ SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_AUI,
+ "1000/10GBASE-T");
/*
* The PHY has been out of reset ever since the system powered up. So
@@ -316,11 +317,9 @@
/* Firmware version check. */
t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v);
- if (v != 30) {
+ if (v != 101)
CH_WARN(adapter, "PHY%d: unsupported firmware %d\n",
phy_addr, v);
- return 0; /* allow t3_prep_adapter to succeed */
- }
/*
* The PHY should start in really-low-power mode. Prepare it for normal
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index d21b705..1b2c305 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -566,6 +566,15 @@
u32 mmds;
};
+enum {
+ EDC_OPT_AEL2005 = 0,
+ EDC_OPT_AEL2005_SIZE = 1084,
+ EDC_TWX_AEL2005 = 1,
+ EDC_TWX_AEL2005_SIZE = 1464,
+ EDC_TWX_AEL2020 = 2,
+ EDC_TWX_AEL2020_SIZE = 1628,
+ EDC_MAX_SIZE = EDC_TWX_AEL2020_SIZE, /* Max cache size */
+};
/* A PHY instance */
struct cphy {
@@ -577,6 +586,7 @@
unsigned long fifo_errors; /* FIFO over/under-flows */
const struct cphy_ops *ops; /* PHY operations */
struct mdio_if_info mdio;
+ u16 phy_cache[EDC_MAX_SIZE]; /* EDC cache */
};
/* Convenience MDIO read/write wrappers */
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index fb5df5c..34e776c 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -172,6 +172,23 @@
}
}
+static void enable_tx_fifo_drain(struct adapter *adapter,
+ struct port_info *pi)
+{
+ t3_set_reg_field(adapter, A_XGM_TXFIFO_CFG + pi->mac.offset, 0,
+ F_ENDROPPKT);
+ t3_write_reg(adapter, A_XGM_RX_CTRL + pi->mac.offset, 0);
+ t3_write_reg(adapter, A_XGM_TX_CTRL + pi->mac.offset, F_TXEN);
+ t3_write_reg(adapter, A_XGM_RX_CTRL + pi->mac.offset, F_RXEN);
+}
+
+static void disable_tx_fifo_drain(struct adapter *adapter,
+ struct port_info *pi)
+{
+ t3_set_reg_field(adapter, A_XGM_TXFIFO_CFG + pi->mac.offset,
+ F_ENDROPPKT, 0);
+}
+
void t3_os_link_fault(struct adapter *adap, int port_id, int state)
{
struct net_device *dev = adap->port[port_id];
@@ -185,6 +202,8 @@
netif_carrier_on(dev);
+ disable_tx_fifo_drain(adap, pi);
+
/* Clear local faults */
t3_xgm_intr_disable(adap, pi->port_id);
t3_read_reg(adap, A_XGM_INT_STATUS +
@@ -200,9 +219,12 @@
t3_xgm_intr_enable(adap, pi->port_id);
t3_mac_enable(mac, MAC_DIRECTION_TX);
- } else
+ } else {
netif_carrier_off(dev);
+ /* Flush TX FIFO */
+ enable_tx_fifo_drain(adap, pi);
+ }
link_report(dev);
}
@@ -232,6 +254,8 @@
if (link_stat != netif_carrier_ok(dev)) {
if (link_stat) {
+ disable_tx_fifo_drain(adapter, pi);
+
t3_mac_enable(mac, MAC_DIRECTION_RX);
/* Clear local faults */
@@ -263,6 +287,9 @@
t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
t3_mac_disable(mac, MAC_DIRECTION_RX);
t3_link_start(&pi->phy, mac, &pi->link_config);
+
+ /* Flush TX FIFO */
+ enable_tx_fifo_drain(adapter, pi);
}
link_report(dev);
@@ -443,6 +470,7 @@
memset(req, 0, sizeof(*req));
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, i));
+ req->mtu_idx = NMTUS - 1;
req->iff = i;
t3_mgmt_tx(adap, skb);
if (skb == adap->nofail_skb) {
@@ -963,6 +991,75 @@
#define FW_FNAME "cxgb3/t3fw-%d.%d.%d.bin"
#define TPSRAM_NAME "cxgb3/t3%c_psram-%d.%d.%d.bin"
+#define AEL2005_OPT_EDC_NAME "cxgb3/ael2005_opt_edc.bin"
+#define AEL2005_TWX_EDC_NAME "cxgb3/ael2005_twx_edc.bin"
+#define AEL2020_TWX_EDC_NAME "cxgb3/ael2020_twx_edc.bin"
+
+static inline const char *get_edc_fw_name(int edc_idx)
+{
+ const char *fw_name = NULL;
+
+ switch (edc_idx) {
+ case EDC_OPT_AEL2005:
+ fw_name = AEL2005_OPT_EDC_NAME;
+ break;
+ case EDC_TWX_AEL2005:
+ fw_name = AEL2005_TWX_EDC_NAME;
+ break;
+ case EDC_TWX_AEL2020:
+ fw_name = AEL2020_TWX_EDC_NAME;
+ break;
+ }
+ return fw_name;
+}
+
+int t3_get_edc_fw(struct cphy *phy, int edc_idx, int size)
+{
+ struct adapter *adapter = phy->adapter;
+ const struct firmware *fw;
+ char buf[64];
+ u32 csum;
+ const __be32 *p;
+ u16 *cache = phy->phy_cache;
+ int i, ret;
+
+ snprintf(buf, sizeof(buf), get_edc_fw_name(edc_idx));
+
+ ret = request_firmware(&fw, buf, &adapter->pdev->dev);
+ if (ret < 0) {
+ dev_err(&adapter->pdev->dev,
+ "could not upgrade firmware: unable to load %s\n",
+ buf);
+ return ret;
+ }
+
+ /* check size, take checksum in account */
+ if (fw->size > size + 4) {
+ CH_ERR(adapter, "firmware image too large %u, expected %d\n",
+ (unsigned int)fw->size, size + 4);
+ ret = -EINVAL;
+ }
+
+ /* compute checksum */
+ p = (const __be32 *)fw->data;
+ for (csum = 0, i = 0; i < fw->size / sizeof(csum); i++)
+ csum += ntohl(p[i]);
+
+ if (csum != 0xffffffff) {
+ CH_ERR(adapter, "corrupted firmware image, checksum %u\n",
+ csum);
+ ret = -EINVAL;
+ }
+
+ for (i = 0; i < size / 4 ; i++) {
+ *cache++ = (be32_to_cpu(p[i]) & 0xffff0000) >> 16;
+ *cache++ = be32_to_cpu(p[i]) & 0xffff;
+ }
+
+ release_firmware(fw);
+
+ return ret;
+}
static int upgrade_fw(struct adapter *adap)
{
@@ -1286,6 +1383,7 @@
if (!other_ports)
schedule_chk_task(adapter);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_UP, pi->port_id);
return 0;
}
@@ -1318,6 +1416,7 @@
if (!adapter->open_device_map)
cxgb_down(adapter);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_DOWN, pi->port_id);
return 0;
}
@@ -2717,7 +2816,7 @@
if (is_offload(adapter) &&
test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
- cxgb3_err_notify(&adapter->tdev, OFFLOAD_STATUS_DOWN, 0);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_DOWN, 0);
offload_close(&adapter->tdev);
}
@@ -2782,7 +2881,7 @@
}
if (is_offload(adapter) && !ofld_disable)
- cxgb3_err_notify(&adapter->tdev, OFFLOAD_STATUS_UP, 0);
+ cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_UP, 0);
}
/*
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index f9f54b5..75064ee 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -153,14 +153,14 @@
mutex_unlock(&cxgb3_db_lock);
}
-void cxgb3_err_notify(struct t3cdev *tdev, u32 status, u32 error)
+void cxgb3_event_notify(struct t3cdev *tdev, u32 event, u32 port)
{
struct cxgb3_client *client;
mutex_lock(&cxgb3_db_lock);
list_for_each_entry(client, &client_list, client_list) {
- if (client->err_handler)
- client->err_handler(tdev, status, error);
+ if (client->event_handler)
+ client->event_handler(tdev, event, port);
}
mutex_unlock(&cxgb3_db_lock);
}
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/cxgb3/cxgb3_offload.h
index 55945f4..670aa62 100644
--- a/drivers/net/cxgb3/cxgb3_offload.h
+++ b/drivers/net/cxgb3/cxgb3_offload.h
@@ -64,14 +64,16 @@
void cxgb3_unregister_client(struct cxgb3_client *client);
void cxgb3_add_clients(struct t3cdev *tdev);
void cxgb3_remove_clients(struct t3cdev *tdev);
-void cxgb3_err_notify(struct t3cdev *tdev, u32 status, u32 error);
+void cxgb3_event_notify(struct t3cdev *tdev, u32 event, u32 port);
typedef int (*cxgb3_cpl_handler_func)(struct t3cdev *dev,
struct sk_buff *skb, void *ctx);
enum {
OFFLOAD_STATUS_UP,
- OFFLOAD_STATUS_DOWN
+ OFFLOAD_STATUS_DOWN,
+ OFFLOAD_PORT_DOWN,
+ OFFLOAD_PORT_UP
};
struct cxgb3_client {
@@ -82,7 +84,7 @@
int (*redirect)(void *ctx, struct dst_entry *old,
struct dst_entry *new, struct l2t_entry *l2t);
struct list_head client_list;
- void (*err_handler)(struct t3cdev *tdev, u32 status, u32 error);
+ void (*event_handler)(struct t3cdev *tdev, u32 event, u32 port);
};
/*
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 29c79eb..f866128 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1216,7 +1216,7 @@
*
* Add a packet to an SGE Tx queue. Runs with softirqs disabled.
*/
-int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
{
int qidx;
unsigned int ndesc, pidx, credits, gen, compl;
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 870d449..032cfe0 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -3465,7 +3465,7 @@
{201, 321, 258, 450, 834, 1602}
};
- u16 val;
+ u16 val, devid;
unsigned int log2_width, pldsize;
unsigned int fst_trn_rx, fst_trn_tx, acklat, rpllmt;
@@ -3473,6 +3473,17 @@
adap->params.pci.pcie_cap_addr + PCI_EXP_DEVCTL,
&val);
pldsize = (val & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+
+ pci_read_config_word(adap->pdev, 0x2, &devid);
+ if (devid == 0x37) {
+ pci_write_config_word(adap->pdev,
+ adap->params.pci.pcie_cap_addr +
+ PCI_EXP_DEVCTL,
+ val & ~PCI_EXP_DEVCTL_READRQ &
+ ~PCI_EXP_DEVCTL_PAYLOAD);
+ pldsize = 0;
+ }
+
pci_read_config_word(adap->pdev,
adap->params.pci.pcie_cap_addr + PCI_EXP_LNKCTL,
&val);
@@ -3681,7 +3692,13 @@
void mac_prep(struct cmac *mac, struct adapter *adapter, int index)
{
+ u16 devid;
+
mac->adapter = adapter;
+ pci_read_config_word(adapter->pdev, 0x2, &devid);
+
+ if (devid == 0x37 && !adapter->params.vpd.xauicfg[1])
+ index = 0;
mac->offset = (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR) * index;
mac->nucast = 1;
diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c
index f87f943..0109ee4 100644
--- a/drivers/net/cxgb3/xgmac.c
+++ b/drivers/net/cxgb3/xgmac.c
@@ -447,11 +447,12 @@
val = t3_read_reg(adap, A_XGM_RXFIFO_CFG + oft);
val &= ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM);
- if (fc & PAUSE_TX)
- val |= V_RXFIFOPAUSEHWM(rx_fifo_hwm(
- t3_read_reg(adap,
- A_XGM_RX_MAX_PKT_SIZE
- + oft)) / 8);
+ if (fc & PAUSE_TX) {
+ u32 rx_max_pkt_size =
+ G_RXMAXPKTSIZE(t3_read_reg(adap,
+ A_XGM_RX_MAX_PKT_SIZE + oft));
+ val |= V_RXFIFOPAUSEHWM(rx_fifo_hwm(rx_max_pkt_size) / 8);
+ }
t3_write_reg(adap, A_XGM_RXFIFO_CFG + oft, val);
t3_set_reg_field(adap, A_XGM_TX_CFG + oft, F_TXPAUSEEN,
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 12fd446..d465eaa 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1920,7 +1920,6 @@
skb_put(p_skb, net_pkt_list->pkt_length);
EMAC_CACHE_INVALIDATE((unsigned long)p_skb->data, p_skb->len);
p_skb->protocol = eth_type_trans(p_skb, priv->ndev);
- p_skb->dev->last_rx = jiffies;
netif_receive_skb(p_skb);
priv->net_dev_stats.rx_bytes += net_pkt_list->pkt_length;
priv->net_dev_stats.rx_packets++;
@@ -2817,7 +2816,7 @@
{
return platform_driver_register(&davinci_emac_driver);
}
-module_init(davinci_emac_init);
+late_initcall(davinci_emac_init);
/**
* davinci_emac_exit: EMAC driver module exit
diff --git a/drivers/net/de600.c b/drivers/net/de600.c
index e1af089..6b13f4f 100644
--- a/drivers/net/de600.c
+++ b/drivers/net/de600.c
@@ -226,7 +226,7 @@
}
spin_unlock_irqrestore(&de600_lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index 55d2bb6..45794f6 100644
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -542,7 +542,7 @@
dev->stats.tx_packets++;
spin_unlock_irqrestore(&de620_lock, flags);
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*****************************************************
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 2b22e58..a31696a 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -902,7 +902,7 @@
if (len < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
len = ETH_ZLEN;
}
@@ -933,7 +933,7 @@
dev->trans_start = jiffies;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void lance_load_multicast(struct net_device *dev)
diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c
index 102b8d4..6a6ea03 100644
--- a/drivers/net/defxx.c
+++ b/drivers/net/defxx.c
@@ -300,7 +300,8 @@
static void dfx_rcv_queue_process(DFX_board_t *bp);
static void dfx_rcv_flush(DFX_board_t *bp);
-static int dfx_xmt_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev);
static int dfx_xmt_done(DFX_board_t *bp);
static void dfx_xmt_flush(DFX_board_t *bp);
@@ -3188,11 +3189,8 @@
* None
*/
-static int dfx_xmt_queue_pkt(
- struct sk_buff *skb,
- struct net_device *dev
- )
-
+static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev)
{
DFX_board_t *bp = netdev_priv(dev);
u8 prod; /* local transmit producer index */
@@ -3218,7 +3216,7 @@
bp->xmt_length_errors++; /* bump error counter */
netif_wake_queue(dev);
dev_kfree_skb(skb);
- return(0); /* return "success" */
+ return NETDEV_TX_OK; /* return "success" */
}
/*
* See if adapter link is available, if not, free buffer
@@ -3241,7 +3239,7 @@
bp->xmt_discards++; /* bump error counter */
dev_kfree_skb(skb); /* free sk_buff now */
netif_wake_queue(dev);
- return(0); /* return "success" */
+ return NETDEV_TX_OK; /* return "success" */
}
}
@@ -3345,7 +3343,7 @@
dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
spin_unlock_irqrestore(&bp->lock, flags);
netif_wake_queue(dev);
- return(0); /* packet queued to adapter */
+ return NETDEV_TX_OK; /* packet queued to adapter */
}
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 97ea2d6..9686c1f 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -516,7 +516,8 @@
** Public Functions
*/
static int depca_open(struct net_device *dev);
-static int depca_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t depca_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t depca_interrupt(int irq, void *dev_id);
static int depca_close(struct net_device *dev);
static int depca_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -928,7 +929,8 @@
/*
** Writes a socket buffer to TX descriptor ring and starts transmission
*/
-static int depca_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t depca_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct depca_private *lp = netdev_priv(dev);
u_long ioaddr = dev->base_addr;
@@ -1793,7 +1795,7 @@
static int load_packet(struct net_device *dev, struct sk_buff *skb)
{
struct depca_private *lp = netdev_priv(dev);
- int i, entry, end, len, status = 0;
+ int i, entry, end, len, status = NETDEV_TX_OK;
entry = lp->tx_new; /* Ring around buffer number. */
end = (entry + (skb->len - 1) / TX_BUFF_SZ) & lp->txRingMask;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 4b6a219..7fa7a90 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -59,7 +59,7 @@
static void rio_timer (unsigned long data);
static void rio_tx_timeout (struct net_device *dev);
static void alloc_list (struct net_device *dev);
-static int start_xmit (struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_xmit (struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rio_interrupt (int irq, void *dev_instance);
static void rio_free_tx (struct net_device *dev, int irq);
static void tx_error (struct net_device *dev, int tx_status);
@@ -600,7 +600,7 @@
return;
}
-static int
+static netdev_tx_t
start_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index dd771de..31b8bef 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -92,6 +92,7 @@
u16 tx_pkt_cnt;
u16 queue_pkt_len;
u16 queue_start_addr;
+ u16 queue_ip_summed;
u16 dbug_cnt;
u8 io_mode; /* 0:word, 2:byte */
u8 phy_addr;
@@ -124,6 +125,10 @@
struct mii_if_info mii;
u32 msg_enable;
+
+ int rx_csum;
+ int can_csum;
+ int ip_summed;
} board_info_t;
/* debug code */
@@ -460,6 +465,40 @@
return mii_nway_restart(&dm->mii);
}
+static uint32_t dm9000_get_rx_csum(struct net_device *dev)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ return dm->rx_csum;
+}
+
+static int dm9000_set_rx_csum(struct net_device *dev, uint32_t data)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ unsigned long flags;
+
+ if (dm->can_csum) {
+ dm->rx_csum = data;
+
+ spin_lock_irqsave(&dm->lock, flags);
+ iow(dm, DM9000_RCSR, dm->rx_csum ? RCSR_CSUM : 0);
+ spin_unlock_irqrestore(&dm->lock, flags);
+
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int dm9000_set_tx_csum(struct net_device *dev, uint32_t data)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+ int ret = -EOPNOTSUPP;
+
+ if (dm->can_csum)
+ ret = ethtool_op_set_tx_csum(dev, data);
+ return ret;
+}
+
static u32 dm9000_get_link(struct net_device *dev)
{
board_info_t *dm = to_dm9000_board(dev);
@@ -540,6 +579,10 @@
.get_eeprom_len = dm9000_get_eeprom_len,
.get_eeprom = dm9000_get_eeprom,
.set_eeprom = dm9000_set_eeprom,
+ .get_rx_csum = dm9000_get_rx_csum,
+ .set_rx_csum = dm9000_set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = dm9000_set_tx_csum,
};
static void dm9000_show_carrier(board_info_t *db,
@@ -685,6 +728,9 @@
/* I/O mode */
db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */
+ /* Checksum mode */
+ dm9000_set_rx_csum(dev, db->rx_csum);
+
/* GPIO0 on pre-activate PHY */
iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
@@ -743,6 +789,29 @@
spin_unlock_irqrestore(&db->lock, flags);
}
+static void dm9000_send_packet(struct net_device *dev,
+ int ip_summed,
+ u16 pkt_len)
+{
+ board_info_t *dm = to_dm9000_board(dev);
+
+ /* The DM9000 is not smart enough to leave fragmented packets alone. */
+ if (dm->ip_summed != ip_summed) {
+ if (ip_summed == CHECKSUM_NONE)
+ iow(dm, DM9000_TCCR, 0);
+ else
+ iow(dm, DM9000_TCCR, TCCR_IP | TCCR_UDP | TCCR_TCP);
+ dm->ip_summed = ip_summed;
+ }
+
+ /* Set TX length to DM9000 */
+ iow(dm, DM9000_TXPLL, pkt_len);
+ iow(dm, DM9000_TXPLH, pkt_len >> 8);
+
+ /* Issue TX polling command */
+ iow(dm, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+}
+
/*
* Hardware start transmission.
* Send a packet to media from the upper layer.
@@ -769,17 +838,11 @@
db->tx_pkt_cnt++;
/* TX control: First packet immediately send, second packet queue */
if (db->tx_pkt_cnt == 1) {
- /* Set TX length to DM9000 */
- iow(db, DM9000_TXPLL, skb->len);
- iow(db, DM9000_TXPLH, skb->len >> 8);
-
- /* Issue TX polling command */
- iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
-
- dev->trans_start = jiffies; /* save the time stamp */
+ dm9000_send_packet(dev, skb->ip_summed, skb->len);
} else {
/* Second packet */
db->queue_pkt_len = skb->len;
+ db->queue_ip_summed = skb->ip_summed;
netif_stop_queue(dev);
}
@@ -788,7 +851,7 @@
/* free this SKB */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -809,12 +872,9 @@
dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status);
/* Queue packet check & send */
- if (db->tx_pkt_cnt > 0) {
- iow(db, DM9000_TXPLL, db->queue_pkt_len);
- iow(db, DM9000_TXPLH, db->queue_pkt_len >> 8);
- iow(db, DM9000_TCR, TCR_TXREQ);
- dev->trans_start = jiffies;
- }
+ if (db->tx_pkt_cnt > 0)
+ dm9000_send_packet(dev, db->queue_ip_summed,
+ db->queue_pkt_len);
netif_wake_queue(dev);
}
}
@@ -846,14 +906,14 @@
rxbyte = readb(db->io_data);
/* Status check: this byte must be 0 or 1 */
- if (rxbyte > DM9000_PKT_RDY) {
+ if (rxbyte & DM9000_PKT_ERR) {
dev_warn(db->dev, "status check fail: %d\n", rxbyte);
iow(db, DM9000_RCR, 0x00); /* Stop Device */
iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */
return;
}
- if (rxbyte != DM9000_PKT_RDY)
+ if (!(rxbyte & DM9000_PKT_RDY))
return;
/* A packet ready now & Get status/length */
@@ -914,6 +974,12 @@
/* Pass to upper layer */
skb->protocol = eth_type_trans(skb, dev);
+ if (db->rx_csum) {
+ if ((((rxbyte & 0x1c) << 3) & rxbyte) == 0)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+ }
netif_rx(skb);
dev->stats.rx_packets++;
@@ -922,7 +988,7 @@
(db->dumpblk)(db->io_data, RxLen);
}
- } while (rxbyte == DM9000_PKT_RDY);
+ } while (rxbyte & DM9000_PKT_RDY);
}
static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
@@ -1185,8 +1251,6 @@
#endif
};
-#define res_size(_r) (((_r)->end - (_r)->start) + 1)
-
/*
* Search DM9000 board, allocate space and register it
*/
@@ -1215,7 +1279,6 @@
/* setup board info structure */
db = netdev_priv(ndev);
- memset(db, 0, sizeof(*db));
db->dev = &pdev->dev;
db->ndev = ndev;
@@ -1236,7 +1299,7 @@
goto out;
}
- iosize = res_size(db->addr_res);
+ iosize = resource_size(db->addr_res);
db->addr_req = request_mem_region(db->addr_res->start, iosize,
pdev->name);
@@ -1254,7 +1317,7 @@
goto out;
}
- iosize = res_size(db->data_res);
+ iosize = resource_size(db->data_res);
db->data_req = request_mem_region(db->data_res->start, iosize,
pdev->name);
@@ -1349,6 +1412,13 @@
db->type = TYPE_DM9000E;
}
+ /* dm9000a/b are capable of hardware checksum offload */
+ if (db->type == TYPE_DM9000A || db->type == TYPE_DM9000B) {
+ db->can_csum = 1;
+ db->rx_csum = 1;
+ ndev->features |= NETIF_F_IP_CSUM;
+ }
+
/* from this point we assume that we have found a DM9000 */
/* driver system function */
@@ -1410,9 +1480,10 @@
}
static int
-dm9000_drv_suspend(struct platform_device *dev, pm_message_t state)
+dm9000_drv_suspend(struct device *dev)
{
- struct net_device *ndev = platform_get_drvdata(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = platform_get_drvdata(pdev);
board_info_t *db;
if (ndev) {
@@ -1428,9 +1499,10 @@
}
static int
-dm9000_drv_resume(struct platform_device *dev)
+dm9000_drv_resume(struct device *dev)
{
- struct net_device *ndev = platform_get_drvdata(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = platform_get_drvdata(pdev);
board_info_t *db = netdev_priv(ndev);
if (ndev) {
@@ -1447,6 +1519,11 @@
return 0;
}
+static struct dev_pm_ops dm9000_drv_pm_ops = {
+ .suspend = dm9000_drv_suspend,
+ .resume = dm9000_drv_resume,
+};
+
static int __devexit
dm9000_drv_remove(struct platform_device *pdev)
{
@@ -1466,11 +1543,10 @@
.driver = {
.name = "dm9000",
.owner = THIS_MODULE,
+ .pm = &dm9000_drv_pm_ops,
},
.probe = dm9000_probe,
.remove = __devexit_p(dm9000_drv_remove),
- .suspend = dm9000_drv_suspend,
- .resume = dm9000_drv_resume,
};
static int __init
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
index ba25cf5..80817c2 100644
--- a/drivers/net/dm9000.h
+++ b/drivers/net/dm9000.h
@@ -45,6 +45,10 @@
#define DM9000_CHIPR 0x2C
#define DM9000_SMCR 0x2F
+#define DM9000_ETXCSR 0x30
+#define DM9000_TCCR 0x31
+#define DM9000_RCSR 0x32
+
#define CHIPR_DM9000A 0x19
#define CHIPR_DM9000B 0x1B
@@ -131,7 +135,21 @@
#define GPCR_GEP_CNTL (1<<0)
+#define TCCR_IP (1<<0)
+#define TCCR_TCP (1<<1)
+#define TCCR_UDP (1<<2)
+
+#define RCSR_UDP_BAD (1<<7)
+#define RCSR_TCP_BAD (1<<6)
+#define RCSR_IP_BAD (1<<5)
+#define RCSR_UDP (1<<4)
+#define RCSR_TCP (1<<3)
+#define RCSR_IP (1<<2)
+#define RCSR_CSUM (1<<1)
+#define RCSR_DISCARD (1<<0)
+
#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */
+#define DM9000_PKT_ERR 0x02
#define DM9000_PKT_MAX 1536 /* Received packet max size */
/* DM9000A / DM9000B definitions */
diff --git a/drivers/net/dnet.c b/drivers/net/dnet.c
index 33fa9ee..2346852 100644
--- a/drivers/net/dnet.c
+++ b/drivers/net/dnet.c
@@ -541,7 +541,7 @@
#define dnet_print_skb(skb) do {} while (0)
#endif
-static int dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dnet *bp = netdev_priv(dev);
@@ -596,7 +596,7 @@
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void dnet_reset_hw(struct dnet *bp)
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 8ebd7d7..37dcfdc 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -39,8 +39,6 @@
static int numdummies = 1;
-static int dummy_xmit(struct sk_buff *skb, struct net_device *dev);
-
static int dummy_set_address(struct net_device *dev, void *p)
{
struct sockaddr *sa = p;
@@ -57,6 +55,16 @@
{
}
+
+static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
static const struct net_device_ops dummy_netdev_ops = {
.ndo_start_xmit = dummy_xmit,
.ndo_validate_addr = eth_validate_addr,
@@ -78,16 +86,6 @@
dev->flags &= ~IFF_MULTICAST;
random_ether_addr(dev->dev_addr);
}
-
-static int dummy_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
-
- dev_kfree_skb(skb);
- return 0;
-}
-
static int dummy_validate(struct nlattr *tb[], struct nlattr *data[])
{
if (tb[IFLA_ADDRESS]) {
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 41b648a..679965c 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1690,7 +1690,8 @@
cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
}
-static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct nic *nic = netdev_priv(netdev);
int err;
@@ -1720,7 +1721,7 @@
}
netdev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static int e100_tx_clean(struct nic *nic)
@@ -1899,7 +1900,7 @@
nic->ru_running = RU_SUSPENDED;
pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
sizeof(struct rfd),
- PCI_DMA_BIDIRECTIONAL);
+ PCI_DMA_FROMDEVICE);
return -ENODATA;
}
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index e9a416f..1a4f89c 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -111,6 +111,9 @@
#define E1000_MIN_RXD 80
#define E1000_MAX_82544_RXD 4096
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
/* this is the size past which hardware will drop packets when setting LPE=0 */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
@@ -137,7 +140,7 @@
#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
-#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
+#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
/* How many Tx Descriptors do we need to call netif_wake_queue ? */
#define E1000_TX_QUEUE_WAKE 16
@@ -161,6 +164,7 @@
struct e1000_buffer {
struct sk_buff *skb;
dma_addr_t dma;
+ struct page *page;
unsigned long time_stamp;
u16 length;
u16 next_to_watch;
@@ -202,6 +206,7 @@
unsigned int next_to_clean;
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
+ struct sk_buff *rx_skb_top;
/* cpu for rx queue */
int cpu;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index c854c96..27f996a 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1904,6 +1904,53 @@
return 0;
}
+static int e1000_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->hw.mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if (ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = 20000;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+ adapter->itr_setting = adapter->itr & ~3;
+ }
+
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ else
+ ew32(ITR, 0);
+
+ return 0;
+}
+
static int e1000_nway_reset(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1978,7 +2025,9 @@
.get_strings = e1000_get_strings,
.phys_id = e1000_phys_id,
.get_ethtool_stats = e1000_get_ethtool_stats,
- .get_sset_count = e1000_get_sset_count,
+ .get_sset_count = e1000_get_sset_count,
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
};
void e1000_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index e1a3fc1..cda6b39 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -1955,7 +1955,7 @@
s32 ret_val;
u16 i;
u16 phy_data;
- u16 reg_data;
+ u16 reg_data = 0;
DEBUGFUNC("e1000_setup_copper_link");
@@ -5759,52 +5759,6 @@
}
/******************************************************************************
- * Sets the bit in the multicast table corresponding to the hash value.
- *
- * hw - Struct containing variables accessed by shared code
- * hash_value - Multicast address hash value
- *****************************************************************************/
-void e1000_mta_set(struct e1000_hw *hw, u32 hash_value)
-{
- u32 hash_bit, hash_reg;
- u32 mta;
- u32 temp;
-
- /* The MTA is a register array of 128 32-bit registers.
- * It is treated like an array of 4096 bits. We want to set
- * bit BitArray[hash_value]. So we figure out what register
- * the bit is in, read it, OR in the new bit, then write
- * back the new value. The register is determined by the
- * upper 7 bits of the hash value and the bit within that
- * register are determined by the lower 5 bits of the value.
- */
- hash_reg = (hash_value >> 5) & 0x7F;
- if (hw->mac_type == e1000_ich8lan)
- hash_reg &= 0x1F;
-
- hash_bit = hash_value & 0x1F;
-
- mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
-
- mta |= (1 << hash_bit);
-
- /* If we are on an 82544 and we are trying to write an odd offset
- * in the MTA, save off the previous entry before writing and
- * restore the old value after writing.
- */
- if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
- temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
- E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
- E1000_WRITE_FLUSH();
- } else {
- E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
- E1000_WRITE_FLUSH();
- }
-}
-
-/******************************************************************************
* Puts an ethernet address into a receive address register.
*
* hw - Struct containing variables accessed by shared code
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 99fce2c..a8866bd 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -523,11 +523,8 @@
/* The sizes (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE 14
-#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
#define ETHERNET_FCS_SIZE 4
-#define MAXIMUM_ETHERNET_PACKET_SIZE \
- (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define MINIMUM_ETHERNET_PACKET_SIZE \
(MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define CRC_LENGTH ETHERNET_FCS_SIZE
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5b8cbdb..c66dd4f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -125,7 +125,8 @@
static void e1000_update_phy_info(unsigned long data);
static void e1000_watchdog(unsigned long data);
static void e1000_82547_tx_fifo_stall(unsigned long data);
-static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
@@ -137,9 +138,15 @@
static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
+ struct e1000_rx_ring *rx_ring,
int cleaned_count);
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
@@ -635,8 +642,8 @@
{
struct e1000_hw *hw = &adapter->hw;
u32 pba = 0, tx_space, min_tx_space, min_rx_space;
- u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
bool legacy_pba_adjust = false;
+ u16 hwm;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
@@ -680,7 +687,7 @@
}
if (legacy_pba_adjust) {
- if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
+ if (hw->max_frame_size > E1000_RXBUFFER_8192)
pba -= 8; /* allocate more FIFO for Tx */
if (hw->mac_type == e1000_82547) {
@@ -690,14 +697,14 @@
(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
atomic_set(&adapter->tx_fifo_stall, 0);
}
- } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
/* adjust PBA for jumbo frames */
ew32(PBA, pba);
/* To maintain wire speed transmits, the Tx FIFO should be
- * large enough to accomodate two full transmit packets,
+ * large enough to accommodate two full transmit packets,
* rounded up to the next 1KB and expressed in KB. Likewise,
- * the Rx FIFO should be large enough to accomodate at least
+ * the Rx FIFO should be large enough to accommodate at least
* one full receive packet and is similarly rounded up and
* expressed in KB. */
pba = er32(PBA);
@@ -705,13 +712,17 @@
tx_space = pba >> 16;
/* lower 16 bits has Rx packet buffer allocation size in KB */
pba &= 0xffff;
- /* don't include ethernet FCS because hardware appends/strips */
- min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
- VLAN_TAG_SIZE;
- min_tx_space = min_rx_space;
- min_tx_space *= 2;
+ /*
+ * the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (hw->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = hw->max_frame_size;
min_rx_space = ALIGN(min_rx_space, 1024);
min_rx_space >>= 10;
@@ -748,23 +759,22 @@
ew32(PBA, pba);
- /* flow control settings */
- /* Set the FC high water mark to 90% of the FIFO size.
- * Required to clear last 3 LSB */
- fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
- /* We can't use 90% on small FIFOs because the remainder
- * would be less than 1 full frame. In this case, we size
- * it to allow at least a full frame above the high water
- * mark. */
- if (pba < E1000_PBA_16K)
- fc_high_water_mark = (pba * 1024) - 1600;
+ /*
+ * flow control settings:
+ * The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - hw->max_frame_size));
- hw->fc_high_water = fc_high_water_mark;
- hw->fc_low_water = fc_high_water_mark - 8;
- if (hw->mac_type == e1000_80003es2lan)
- hw->fc_pause_time = 0xFFFF;
- else
- hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ hw->fc_low_water = hw->fc_high_water - 8;
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
hw->fc_send_xon = 1;
hw->fc = hw->original_fc;
@@ -1862,6 +1872,7 @@
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
+ rxdr->rx_skb_top = NULL;
return 0;
}
@@ -1968,10 +1979,17 @@
struct e1000_hw *hw = &adapter->hw;
u32 rdlen, rctl, rxcsum, ctrl_ext;
- rdlen = adapter->rx_ring[0].count *
- sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_rx_irq;
- adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+ } else {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
/* disable receives while setting up the descriptors */
rctl = er32(RCTL);
@@ -2185,26 +2203,39 @@
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma) {
- pci_unmap_single(pdev,
- buffer_info->dma,
- buffer_info->length,
- PCI_DMA_FROMDEVICE);
+ if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_rx_irq) {
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ } else if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
+ pci_unmap_page(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
}
buffer_info->dma = 0;
-
+ if (buffer_info->page) {
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ }
if (buffer_info->skb) {
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
}
}
+ /* there also may be some cached data from a chained receive */
+ if (rx_ring->rx_skb_top) {
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ }
+
size = sizeof(struct e1000_buffer) * rx_ring->count;
memset(rx_ring->buffer_info, 0, size);
/* Zero out the descriptor ring */
-
memset(rx_ring->desc, 0, rx_ring->size);
rx_ring->next_to_clean = 0;
@@ -2371,7 +2402,9 @@
rctl &= ~E1000_RCTL_MPE;
}
if (adapter->hw.mac_type != e1000_ich8lan)
- rctl |= E1000_RCTL_VFE;
+ /* Enable VLAN filter if there is a VLAN */
+ if (adapter->vlgrp)
+ rctl |= E1000_RCTL_VFE;
}
if (netdev->uc.count > rar_entries - 1) {
@@ -3219,7 +3252,8 @@
}
#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -3450,7 +3484,7 @@
switch (hw->mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
case e1000_ich8lan:
- if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
return -EINVAL;
}
@@ -3463,7 +3497,7 @@
&eeprom_data);
if ((hw->device_id != E1000_DEV_ID_82573L) ||
(eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
- if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
DPRINTK(PROBE, ERR,
"Jumbo Frames not supported.\n");
return -EINVAL;
@@ -3489,8 +3523,10 @@
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size
- * i.e. RXBUFFER_2048 --> size-4096 slab */
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * however with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs */
if (max_frame <= E1000_RXBUFFER_256)
adapter->rx_buffer_len = E1000_RXBUFFER_256;
@@ -3500,16 +3536,16 @@
adapter->rx_buffer_len = E1000_RXBUFFER_1024;
else if (max_frame <= E1000_RXBUFFER_2048)
adapter->rx_buffer_len = E1000_RXBUFFER_2048;
- else if (max_frame <= E1000_RXBUFFER_4096)
- adapter->rx_buffer_len = E1000_RXBUFFER_4096;
- else if (max_frame <= E1000_RXBUFFER_8192)
- adapter->rx_buffer_len = E1000_RXBUFFER_8192;
- else if (max_frame <= E1000_RXBUFFER_16384)
+ else
+#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+#elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = PAGE_SIZE;
+#endif
/* adjust allocation if LPE protects us, and we aren't using SBP */
if (!hw->tbi_compatibility_on &&
- ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
+ ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
@@ -3987,9 +4023,227 @@
}
/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+ u16 length)
+{
+ bi->page = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+}
+
+/**
+ * e1000_receive_skb - helper function to handle rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ */
+static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
+ __le16 vlan, struct sk_buff *skb)
+{
+ if (unlikely(adapter->vlgrp && (status & E1000_RXD_STAT_VP))) {
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ } else {
+ netif_receive_skb(skb);
+ }
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ */
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long irq_flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ pci_unmap_page(pdev, buffer_info->dma, buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /* errors is only valid for DD + EOP descriptors */
+ if (unlikely((status & E1000_RXD_STAT_EOP) &&
+ (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock,
+ irq_flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ irq_flags);
+ length--;
+ } else {
+ /* recycle both page and skb */
+ buffer_info->skb = skb;
+ /* an error means any chain goes out the window
+ * too */
+ if (rx_ring->rx_skb_top)
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ goto next_desc;
+ }
+ }
+
+#define rxtop rx_ring->rx_skb_top
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ /* this descriptor is only the beginning (or middle) */
+ if (!rxtop) {
+ /* this is the beginning of a chain */
+ rxtop = skb;
+ skb_fill_page_desc(rxtop, 0, buffer_info->page,
+ 0, length);
+ } else {
+ /* this is the middle of a chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the skb, only consumed the page */
+ buffer_info->skb = skb;
+ }
+ e1000_consume_page(buffer_info, rxtop, length);
+ goto next_desc;
+ } else {
+ if (rxtop) {
+ /* end of the chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the current skb, we only consumed the
+ * page */
+ buffer_info->skb = skb;
+ skb = rxtop;
+ rxtop = NULL;
+ e1000_consume_page(buffer_info, skb, length);
+ } else {
+ /* no chain, got EOP, this buf is the packet
+ * copybreak to save the put_page/alloc_page */
+ if (length <= copybreak &&
+ skb_tailroom(skb) >= length) {
+ u8 *vaddr;
+ vaddr = kmap_atomic(buffer_info->page,
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb_tail_pointer(skb), vaddr, length);
+ kunmap_atomic(vaddr,
+ KM_SKB_DATA_SOFTIRQ);
+ /* re-use the page, so don't erase
+ * buffer_info->page */
+ skb_put(skb, length);
+ } else {
+ skb_fill_page_desc(skb, 0,
+ buffer_info->page, 0,
+ length);
+ e1000_consume_page(buffer_info, skb,
+ length);
+ }
+ }
+ }
+
+ /* Receive Checksum Offload XXX recompute due to CRC strip? */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ pskb_trim(skb, skb->len - 4);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ /* eth type trans needs skb->data to point to something */
+ if (!pskb_may_pull(skb, ETH_HLEN)) {
+ DPRINTK(DRV, ERR, "pskb_may_pull failed.\n");
+ dev_kfree_skb(skb);
+ goto next_desc;
+ }
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_bytes += total_rx_bytes;
+ adapter->net_stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
* e1000_clean_rx_irq - Send received data up the network stack; legacy
* @adapter: board private structure
- **/
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ */
static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do)
@@ -4001,7 +4255,6 @@
struct e1000_buffer *buffer_info, *next_buffer;
unsigned long flags;
u32 length;
- u8 last_byte;
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
@@ -4033,9 +4286,7 @@
cleaned = true;
cleaned_count++;
- pci_unmap_single(pdev,
- buffer_info->dma,
- buffer_info->length,
+ pci_unmap_single(pdev, buffer_info->dma, buffer_info->length,
PCI_DMA_FROMDEVICE);
buffer_info->dma = 0;
@@ -4052,7 +4303,7 @@
}
if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
- last_byte = *(skb->data + length - 1);
+ u8 last_byte = *(skb->data + length - 1);
if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
last_byte)) {
spin_lock_irqsave(&adapter->stats_lock, flags);
@@ -4107,13 +4358,7 @@
skb->protocol = eth_type_trans(skb, netdev);
- if (unlikely(adapter->vlgrp &&
- (status & E1000_RXD_STAT_VP))) {
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
- le16_to_cpu(rx_desc->special));
- } else {
- netif_receive_skb(skb);
- }
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
next_desc:
rx_desc->status = 0;
@@ -4142,6 +4387,114 @@
}
/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
+ * @rx_ring: pointer to receive ring structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void
+e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring, int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = 256 -
+ 16 /*for skb_reserve */ -
+ NET_IP_ALIGN;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto check_page;
+ }
+
+ skb = netdev_alloc_skb(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
+ "at %p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while (cleaned_count--) */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+check_page:
+ /* allocate a new page if necessary */
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (unlikely(!buffer_info->page)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
+
+ if (!buffer_info->dma)
+ buffer_info->dma = pci_map_page(pdev,
+ buffer_info->page, 0,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
* e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
* @adapter: address of board private structure
**/
@@ -4186,6 +4539,7 @@
/* Failed allocation, critical failure */
if (!skb) {
dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
break;
}
@@ -4193,6 +4547,7 @@
/* give up */
dev_kfree_skb(skb);
dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
break; /* while !buffer_info->skb */
}
@@ -4210,9 +4565,14 @@
map_skb:
buffer_info->dma = pci_map_single(pdev,
skb->data,
- adapter->rx_buffer_len,
+ buffer_info->length,
PCI_DMA_FROMDEVICE);
+ /*
+ * XXX if it was allocated cleanly it will never map to a
+ * boundary crossing
+ */
+
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter,
(void *)(unsigned long)buffer_info->dma,
@@ -4229,6 +4589,7 @@
PCI_DMA_FROMDEVICE);
buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
break; /* while !buffer_info->skb */
}
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -4353,8 +4714,6 @@
data->phy_id = hw->phy_addr;
break;
case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
spin_lock_irqsave(&adapter->stats_lock, flags);
if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
&data->val_out)) {
@@ -4364,8 +4723,6 @@
spin_unlock_irqrestore(&adapter->stats_lock, flags);
break;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
if (data->reg_num & ~(0x1F))
return -EFAULT;
mii_reg = data->val_in;
@@ -4497,6 +4854,8 @@
/* enable VLAN receive filtering */
rctl = er32(RCTL);
rctl &= ~E1000_RCTL_CFIEN;
+ if (!(netdev->flags & IFF_PROMISC))
+ rctl |= E1000_RCTL_VFE;
ew32(RCTL, rctl);
e1000_update_mng_vlan(adapter);
}
@@ -4507,6 +4866,11 @@
ew32(CTRL, ctrl);
if (adapter->hw.mac_type != e1000_ich8lan) {
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+
if (adapter->mng_vlan_id !=
(u16)E1000_MNG_VLAN_NONE) {
e1000_vlan_rx_kill_vid(netdev,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index fa92a68..16c193a 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4097,7 +4097,8 @@
}
#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_ring *tx_ring = adapter->tx_ring;
@@ -4345,8 +4346,6 @@
data->phy_id = adapter->hw.phy.addr;
break;
case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
switch (data->reg_num & 0x1F) {
case MII_BMCR:
data->val_out = adapter->phy_regs.bmcr;
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 4f70034..1e93416 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -309,7 +309,8 @@
static int eepro_probe1(struct net_device *dev, int autoprobe);
static int eepro_open(struct net_device *dev);
-static int eepro_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t eepro_interrupt(int irq, void *dev_id);
static void eepro_rx(struct net_device *dev);
static void eepro_transmit_interrupt(struct net_device *dev);
@@ -1133,7 +1134,8 @@
}
-static int eepro_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct eepro_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -1145,7 +1147,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
netif_stop_queue (dev);
@@ -1178,7 +1180,7 @@
eepro_en_int(ioaddr);
spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 1f016d6..592de8f 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -246,7 +246,8 @@
static int eexp_open(struct net_device *dev);
static int eexp_close(struct net_device *dev);
static void eexp_timeout(struct net_device *dev);
-static int eexp_xmit(struct sk_buff *buf, struct net_device *dev);
+static netdev_tx_t eexp_xmit(struct sk_buff *buf,
+ struct net_device *dev);
static irqreturn_t eexp_irq(int irq, void *dev_addr);
static void eexp_set_multicast(struct net_device *dev);
@@ -650,7 +651,7 @@
* Called to transmit a packet, or to allow us to right ourselves
* if the kernel thinks we've died.
*/
-static int eexp_xmit(struct sk_buff *buf, struct net_device *dev)
+static netdev_tx_t eexp_xmit(struct sk_buff *buf, struct net_device *dev)
{
short length = buf->len;
#ifdef CONFIG_SMP
@@ -664,7 +665,7 @@
if (buf->len < ETH_ZLEN) {
if (skb_padto(buf, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
@@ -691,7 +692,7 @@
spin_unlock_irqrestore(&lp->lock, flags);
#endif
enable_irq(dev->irq);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index fc6cc03..117fc6c 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1276,7 +1276,8 @@
locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
}
-static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t enc28j60_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct enc28j60_net *priv = netdev_priv(dev);
@@ -1299,7 +1300,7 @@
priv->tx_skb = skb;
schedule_work(&priv->tx_work);
- return 0;
+ return NETDEV_TX_OK;
}
static void enc28j60_tx_work_handler(struct work_struct *work)
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index c26cea0..e1c2076 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -29,28 +29,34 @@
#include "vnic_cq.h"
#include "vnic_intr.h"
#include "vnic_stats.h"
+#include "vnic_nic.h"
#include "vnic_rss.h"
#define DRV_NAME "enic"
#define DRV_DESCRIPTION "Cisco 10G Ethernet Driver"
-#define DRV_VERSION "1.0.0.933"
-#define DRV_COPYRIGHT "Copyright 2008 Cisco Systems, Inc"
+#define DRV_VERSION "1.1.0.100"
+#define DRV_COPYRIGHT "Copyright 2008-2009 Cisco Systems, Inc"
#define PFX DRV_NAME ": "
#define ENIC_LRO_MAX_DESC 8
#define ENIC_LRO_MAX_AGGR 64
+#define ENIC_BARS_MAX 6
+
+#define ENIC_WQ_MAX 8
+#define ENIC_RQ_MAX 8
+#define ENIC_CQ_MAX (ENIC_WQ_MAX + ENIC_RQ_MAX)
+#define ENIC_INTR_MAX (ENIC_CQ_MAX + 2)
+
enum enic_cq_index {
ENIC_CQ_RQ,
ENIC_CQ_WQ,
- ENIC_CQ_MAX,
};
enum enic_intx_intr_index {
ENIC_INTX_WQ_RQ,
ENIC_INTX_ERR,
ENIC_INTX_NOTIFY,
- ENIC_INTX_MAX,
};
enum enic_msix_intr_index {
@@ -73,7 +79,7 @@
struct net_device *netdev;
struct pci_dev *pdev;
struct vnic_enet_config config;
- struct vnic_dev_bar bar0;
+ struct vnic_dev_bar bar[ENIC_BARS_MAX];
struct vnic_dev *vdev;
struct timer_list notify_timer;
struct work_struct reset;
@@ -88,22 +94,23 @@
u32 port_mtu;
/* work queue cache line section */
- ____cacheline_aligned struct vnic_wq wq[1];
- spinlock_t wq_lock[1];
+ ____cacheline_aligned struct vnic_wq wq[ENIC_WQ_MAX];
+ spinlock_t wq_lock[ENIC_WQ_MAX];
unsigned int wq_count;
struct vlan_group *vlan_group;
/* receive queue cache line section */
- ____cacheline_aligned struct vnic_rq rq[1];
+ ____cacheline_aligned struct vnic_rq rq[ENIC_RQ_MAX];
unsigned int rq_count;
int (*rq_alloc_buf)(struct vnic_rq *rq);
+ u64 rq_truncated_pkts;
u64 rq_bad_fcs;
struct napi_struct napi;
struct net_lro_mgr lro_mgr;
struct net_lro_desc lro_desc[ENIC_LRO_MAX_DESC];
/* interrupt resource cache line section */
- ____cacheline_aligned struct vnic_intr intr[ENIC_MSIX_MAX];
+ ____cacheline_aligned struct vnic_intr intr[ENIC_INTR_MAX];
unsigned int intr_count;
u32 __iomem *legacy_pba; /* memory-mapped */
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 8005b60..d69d52e 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -44,10 +44,15 @@
#include "enic.h"
#define ENIC_NOTIFY_TIMER_PERIOD (2 * HZ)
+#define WQ_ENET_MAX_DESC_LEN (1 << WQ_ENET_LEN_BITS)
+#define MAX_TSO (1 << 16)
+#define ENIC_DESC_MAX_SPLITS (MAX_TSO / WQ_ENET_MAX_DESC_LEN + 1)
+
+#define PCI_DEVICE_ID_CISCO_VIC_ENET 0x0043 /* ethernet vnic */
/* Supported devices */
static struct pci_device_id enic_id_table[] = {
- { PCI_VDEVICE(CISCO, 0x0043) },
+ { PCI_VDEVICE(CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET) },
{ 0, } /* end of table */
};
@@ -256,7 +261,7 @@
enic->msg_enable = value;
}
-static struct ethtool_ops enic_ethtool_ops = {
+static const struct ethtool_ops enic_ethtool_ops = {
.get_settings = enic_get_settings,
.get_drvinfo = enic_get_drvinfo,
.get_msglevel = enic_get_msglevel,
@@ -310,7 +315,8 @@
opaque);
if (netif_queue_stopped(enic->netdev) &&
- vnic_wq_desc_avail(&enic->wq[q_number]) >= MAX_SKB_FRAGS + 1)
+ vnic_wq_desc_avail(&enic->wq[q_number]) >=
+ (MAX_SKB_FRAGS + ENIC_DESC_MAX_SPLITS))
netif_wake_queue(enic->netdev);
spin_unlock(&enic->wq_lock[q_number]);
@@ -356,7 +362,7 @@
{
u32 mtu = vnic_dev_mtu(enic->vdev);
- if (mtu != enic->port_mtu) {
+ if (mtu && mtu != enic->port_mtu) {
if (mtu < enic->netdev->mtu)
printk(KERN_WARNING PFX
"%s: interface MTU (%d) set higher "
@@ -525,7 +531,11 @@
unsigned int len_left = skb->len - head_len;
int eop = (len_left == 0);
- /* Queue the main skb fragment */
+ /* Queue the main skb fragment. The fragments are no larger
+ * than max MTU(9000)+ETH_HDR_LEN(14) bytes, which is less
+ * than WQ_ENET_MAX_DESC_LEN length. So only one descriptor
+ * per fragment is queued.
+ */
enic_queue_wq_desc(wq, skb,
pci_map_single(enic->pdev, skb->data,
head_len, PCI_DMA_TODEVICE),
@@ -547,7 +557,11 @@
unsigned int csum_offset = hdr_len + skb->csum_offset;
int eop = (len_left == 0);
- /* Queue the main skb fragment */
+ /* Queue the main skb fragment. The fragments are no larger
+ * than max MTU(9000)+ETH_HDR_LEN(14) bytes, which is less
+ * than WQ_ENET_MAX_DESC_LEN length. So only one descriptor
+ * per fragment is queued.
+ */
enic_queue_wq_desc_csum_l4(wq, skb,
pci_map_single(enic->pdev, skb->data,
head_len, PCI_DMA_TODEVICE),
@@ -565,10 +579,14 @@
struct vnic_wq *wq, struct sk_buff *skb, unsigned int mss,
int vlan_tag_insert, unsigned int vlan_tag)
{
- unsigned int head_len = skb_headlen(skb);
- unsigned int len_left = skb->len - head_len;
+ unsigned int frag_len_left = skb_headlen(skb);
+ unsigned int len_left = skb->len - frag_len_left;
unsigned int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
int eop = (len_left == 0);
+ unsigned int len;
+ dma_addr_t dma_addr;
+ unsigned int offset = 0;
+ skb_frag_t *frag;
/* Preload TCP csum field with IP pseudo hdr calculated
* with IP length set to zero. HW will later add in length
@@ -584,17 +602,49 @@
&ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
}
- /* Queue the main skb fragment */
- enic_queue_wq_desc_tso(wq, skb,
- pci_map_single(enic->pdev, skb->data,
- head_len, PCI_DMA_TODEVICE),
- head_len,
- mss, hdr_len,
- vlan_tag_insert, vlan_tag,
- eop);
+ /* Queue WQ_ENET_MAX_DESC_LEN length descriptors
+ * for the main skb fragment
+ */
+ while (frag_len_left) {
+ len = min(frag_len_left, (unsigned int)WQ_ENET_MAX_DESC_LEN);
+ dma_addr = pci_map_single(enic->pdev, skb->data + offset,
+ len, PCI_DMA_TODEVICE);
+ enic_queue_wq_desc_tso(wq, skb,
+ dma_addr,
+ len,
+ mss, hdr_len,
+ vlan_tag_insert, vlan_tag,
+ eop && (len == frag_len_left));
+ frag_len_left -= len;
+ offset += len;
+ }
- if (!eop)
- enic_queue_wq_skb_cont(enic, wq, skb, len_left);
+ if (eop)
+ return;
+
+ /* Queue WQ_ENET_MAX_DESC_LEN length descriptors
+ * for additional data fragments
+ */
+ for (frag = skb_shinfo(skb)->frags; len_left; frag++) {
+ len_left -= frag->size;
+ frag_len_left = frag->size;
+ offset = frag->page_offset;
+
+ while (frag_len_left) {
+ len = min(frag_len_left,
+ (unsigned int)WQ_ENET_MAX_DESC_LEN);
+ dma_addr = pci_map_page(enic->pdev, frag->page,
+ offset, len,
+ PCI_DMA_TODEVICE);
+ enic_queue_wq_desc_cont(wq, skb,
+ dma_addr,
+ len,
+ (len_left == 0) &&
+ (len == frag_len_left)); /* EOP? */
+ frag_len_left -= len;
+ offset += len;
+ }
+ }
}
static inline void enic_queue_wq_skb(struct enic *enic,
@@ -622,7 +672,8 @@
}
/* netif_tx_lock held, process context with BHs disabled, or BH */
-static int enic_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct enic *enic = netdev_priv(netdev);
struct vnic_wq *wq = &enic->wq[0];
@@ -647,7 +698,8 @@
spin_lock_irqsave(&enic->wq_lock[0], flags);
- if (vnic_wq_desc_avail(wq) < skb_shinfo(skb)->nr_frags + 1) {
+ if (vnic_wq_desc_avail(wq) <
+ skb_shinfo(skb)->nr_frags + ENIC_DESC_MAX_SPLITS) {
netif_stop_queue(netdev);
/* This is a hard error, log it */
printk(KERN_ERR PFX "%s: BUG! Tx ring full when "
@@ -658,7 +710,7 @@
enic_queue_wq_skb(enic, wq, skb);
- if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + 1)
+ if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + ENIC_DESC_MAX_SPLITS)
netif_stop_queue(netdev);
spin_unlock_irqrestore(&enic->wq_lock[0], flags);
@@ -686,8 +738,9 @@
net_stats->rx_bytes = stats->rx.rx_bytes_ok;
net_stats->rx_errors = stats->rx.rx_errors;
net_stats->multicast = stats->rx.rx_multicast_frames_ok;
+ net_stats->rx_over_errors = enic->rq_truncated_pkts;
net_stats->rx_crc_errors = enic->rq_bad_fcs;
- net_stats->rx_dropped = stats->rx.rx_no_bufs;
+ net_stats->rx_dropped = stats->rx.rx_no_bufs + stats->rx.rx_drop;
return net_stats;
}
@@ -817,11 +870,12 @@
dev_kfree_skb_any(buf->os_buf);
}
-static inline struct sk_buff *enic_rq_alloc_skb(unsigned int size)
+static inline struct sk_buff *enic_rq_alloc_skb(struct net_device *netdev,
+ unsigned int size)
{
struct sk_buff *skb;
- skb = dev_alloc_skb(size + NET_IP_ALIGN);
+ skb = netdev_alloc_skb(netdev, size + NET_IP_ALIGN);
if (skb)
skb_reserve(skb, NET_IP_ALIGN);
@@ -832,12 +886,13 @@
static int enic_rq_alloc_buf(struct vnic_rq *rq)
{
struct enic *enic = vnic_dev_priv(rq->vdev);
+ struct net_device *netdev = enic->netdev;
struct sk_buff *skb;
- unsigned int len = enic->netdev->mtu + ETH_HLEN;
+ unsigned int len = netdev->mtu + ETH_HLEN;
unsigned int os_buf_index = 0;
dma_addr_t dma_addr;
- skb = enic_rq_alloc_skb(len);
+ skb = enic_rq_alloc_skb(netdev, len);
if (!skb)
return -ENOMEM;
@@ -850,6 +905,50 @@
return 0;
}
+static int enic_rq_alloc_buf_a1(struct vnic_rq *rq)
+{
+ struct rq_enet_desc *desc = vnic_rq_next_desc(rq);
+
+ if (vnic_rq_posting_soon(rq)) {
+
+ /* SW workaround for A0 HW erratum: if we're just about
+ * to write posted_index, insert a dummy desc
+ * of type resvd
+ */
+
+ rq_enet_desc_enc(desc, 0, RQ_ENET_TYPE_RESV2, 0);
+ vnic_rq_post(rq, 0, 0, 0, 0);
+ } else {
+ return enic_rq_alloc_buf(rq);
+ }
+
+ return 0;
+}
+
+static int enic_set_rq_alloc_buf(struct enic *enic)
+{
+ enum vnic_dev_hw_version hw_ver;
+ int err;
+
+ err = vnic_dev_hw_version(enic->vdev, &hw_ver);
+ if (err)
+ return err;
+
+ switch (hw_ver) {
+ case VNIC_DEV_HW_VER_A1:
+ enic->rq_alloc_buf = enic_rq_alloc_buf_a1;
+ break;
+ case VNIC_DEV_HW_VER_A2:
+ case VNIC_DEV_HW_VER_UNKNOWN:
+ enic->rq_alloc_buf = enic_rq_alloc_buf;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int enic_get_skb_header(struct sk_buff *skb, void **iphdr,
void **tcph, u64 *hdr_flags, void *priv)
{
@@ -931,8 +1030,12 @@
if (packet_error) {
- if (bytes_written > 0 && !fcs_ok)
- enic->rq_bad_fcs++;
+ if (!fcs_ok) {
+ if (bytes_written > 0)
+ enic->rq_bad_fcs++;
+ else if (bytes_written == 0)
+ enic->rq_truncated_pkts++;
+ }
dev_kfree_skb_any(skb);
@@ -1057,7 +1160,7 @@
/* Replenish RQ
*/
- vnic_rq_fill(&enic->rq[0], enic_rq_alloc_buf);
+ vnic_rq_fill(&enic->rq[0], enic->rq_alloc_buf);
} else {
@@ -1092,7 +1195,7 @@
/* Replenish RQ
*/
- vnic_rq_fill(&enic->rq[0], enic_rq_alloc_buf);
+ vnic_rq_fill(&enic->rq[0], enic->rq_alloc_buf);
/* Return intr event credits for this polling
* cycle. An intr event is the completion of a
@@ -1218,6 +1321,7 @@
{
int err;
+ spin_lock(&enic->devcmd_lock);
switch (vnic_dev_get_intr_mode(enic->vdev)) {
case VNIC_DEV_INTR_MODE_INTX:
err = vnic_dev_notify_set(enic->vdev, ENIC_INTX_NOTIFY);
@@ -1229,6 +1333,7 @@
err = vnic_dev_notify_set(enic->vdev, -1 /* no intr */);
break;
}
+ spin_unlock(&enic->devcmd_lock);
return err;
}
@@ -1268,7 +1373,7 @@
}
for (i = 0; i < enic->rq_count; i++) {
- err = vnic_rq_fill(&enic->rq[i], enic_rq_alloc_buf);
+ err = vnic_rq_fill(&enic->rq[i], enic->rq_alloc_buf);
if (err) {
printk(KERN_ERR PFX
"%s: Unable to alloc receive buffers.\n",
@@ -1282,12 +1387,16 @@
for (i = 0; i < enic->rq_count; i++)
vnic_rq_enable(&enic->rq[i]);
+ spin_lock(&enic->devcmd_lock);
enic_add_station_addr(enic);
+ spin_unlock(&enic->devcmd_lock);
enic_set_multicast_list(netdev);
netif_wake_queue(netdev);
napi_enable(&enic->napi);
+ spin_lock(&enic->devcmd_lock);
vnic_dev_enable(enic->vdev);
+ spin_unlock(&enic->devcmd_lock);
for (i = 0; i < enic->intr_count; i++)
vnic_intr_unmask(&enic->intr[i]);
@@ -1297,7 +1406,9 @@
return 0;
err_out_notify_unset:
+ spin_lock(&enic->devcmd_lock);
vnic_dev_notify_unset(enic->vdev);
+ spin_unlock(&enic->devcmd_lock);
err_out_free_intr:
enic_free_intr(enic);
@@ -1313,7 +1424,9 @@
del_timer_sync(&enic->notify_timer);
+ spin_lock(&enic->devcmd_lock);
vnic_dev_disable(enic->vdev);
+ spin_unlock(&enic->devcmd_lock);
napi_disable(&enic->napi);
netif_stop_queue(netdev);
@@ -1331,7 +1444,9 @@
return err;
}
+ spin_lock(&enic->devcmd_lock);
vnic_dev_notify_unset(enic->vdev);
+ spin_unlock(&enic->devcmd_lock);
enic_free_intr(enic);
(void)vnic_cq_service(&enic->cq[ENIC_CQ_RQ],
@@ -1471,7 +1586,7 @@
const u8 ig_vlan_strip_en = 1;
/* Enable VLAN tag stripping. RSS not enabled (yet).
- */
+ */
return enic_set_nic_cfg(enic,
rss_default_cpu, rss_hash_type,
@@ -1506,8 +1621,8 @@
static int enic_set_intr_mode(struct enic *enic)
{
- unsigned int n = ARRAY_SIZE(enic->rq);
- unsigned int m = ARRAY_SIZE(enic->wq);
+ unsigned int n = 1;
+ unsigned int m = 1;
unsigned int i;
/* Set interrupt mode (INTx, MSI, MSI-X) depending
@@ -1608,12 +1723,6 @@
vnic_dev_set_intr_mode(enic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN);
}
-static void enic_iounmap(struct enic *enic)
-{
- if (enic->bar0.vaddr)
- iounmap(enic->bar0.vaddr);
-}
-
static const struct net_device_ops enic_netdev_ops = {
.ndo_open = enic_open,
.ndo_stop = enic_stop,
@@ -1632,6 +1741,97 @@
#endif
};
+void enic_dev_deinit(struct enic *enic)
+{
+ netif_napi_del(&enic->napi);
+ enic_free_vnic_resources(enic);
+ enic_clear_intr_mode(enic);
+}
+
+int enic_dev_init(struct enic *enic)
+{
+ struct net_device *netdev = enic->netdev;
+ int err;
+
+ /* Get vNIC configuration
+ */
+
+ err = enic_get_vnic_config(enic);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Get vNIC configuration failed, aborting.\n");
+ return err;
+ }
+
+ /* Get available resource counts
+ */
+
+ enic_get_res_counts(enic);
+
+ /* Set interrupt mode based on resource counts and system
+ * capabilities
+ */
+
+ err = enic_set_intr_mode(enic);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Failed to set intr mode, aborting.\n");
+ return err;
+ }
+
+ /* Allocate and configure vNIC resources
+ */
+
+ err = enic_alloc_vnic_resources(enic);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Failed to alloc vNIC resources, aborting.\n");
+ goto err_out_free_vnic_resources;
+ }
+
+ enic_init_vnic_resources(enic);
+
+ err = enic_set_rq_alloc_buf(enic);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Failed to set RQ buffer allocator, aborting.\n");
+ goto err_out_free_vnic_resources;
+ }
+
+ err = enic_set_niccfg(enic);
+ if (err) {
+ printk(KERN_ERR PFX
+ "Failed to config nic, aborting.\n");
+ goto err_out_free_vnic_resources;
+ }
+
+ switch (vnic_dev_get_intr_mode(enic->vdev)) {
+ default:
+ netif_napi_add(netdev, &enic->napi, enic_poll, 64);
+ break;
+ case VNIC_DEV_INTR_MODE_MSIX:
+ netif_napi_add(netdev, &enic->napi, enic_poll_msix, 64);
+ break;
+ }
+
+ return 0;
+
+err_out_free_vnic_resources:
+ enic_clear_intr_mode(enic);
+ enic_free_vnic_resources(enic);
+
+ return err;
+}
+
+static void enic_iounmap(struct enic *enic)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(enic->bar); i++)
+ if (enic->bar[i].vaddr)
+ iounmap(enic->bar[i].vaddr);
+}
+
static int __devinit enic_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1709,31 +1909,28 @@
using_dac = 1;
}
- /* Map vNIC resources from BAR0
+ /* Map vNIC resources from BAR0-5
*/
- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX
- "BAR0 not memory-map'able, aborting.\n");
- err = -ENODEV;
- goto err_out_release_regions;
- }
-
- enic->bar0.vaddr = pci_iomap(pdev, 0, enic->bar0.len);
- enic->bar0.bus_addr = pci_resource_start(pdev, 0);
- enic->bar0.len = pci_resource_len(pdev, 0);
-
- if (!enic->bar0.vaddr) {
- printk(KERN_ERR PFX
- "Cannot memory-map BAR0 res hdr, aborting.\n");
- err = -ENODEV;
- goto err_out_release_regions;
+ for (i = 0; i < ARRAY_SIZE(enic->bar); i++) {
+ if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM))
+ continue;
+ enic->bar[i].len = pci_resource_len(pdev, i);
+ enic->bar[i].vaddr = pci_iomap(pdev, i, enic->bar[i].len);
+ if (!enic->bar[i].vaddr) {
+ printk(KERN_ERR PFX
+ "Cannot memory-map BAR %d, aborting.\n", i);
+ err = -ENODEV;
+ goto err_out_iounmap;
+ }
+ enic->bar[i].bus_addr = pci_resource_start(pdev, i);
}
/* Register vNIC device
*/
- enic->vdev = vnic_dev_register(NULL, enic, pdev, &enic->bar0);
+ enic->vdev = vnic_dev_register(NULL, enic, pdev, enic->bar,
+ ARRAY_SIZE(enic->bar));
if (!enic->vdev) {
printk(KERN_ERR PFX
"vNIC registration failed, aborting.\n");
@@ -1768,51 +1965,13 @@
goto err_out_dev_close;
}
- /* Get vNIC configuration
- */
-
- err = enic_get_vnic_config(enic);
+ err = enic_dev_init(enic);
if (err) {
printk(KERN_ERR PFX
- "Get vNIC configuration failed, aborting.\n");
+ "Device initialization failed, aborting.\n");
goto err_out_dev_close;
}
- /* Get available resource counts
- */
-
- enic_get_res_counts(enic);
-
- /* Set interrupt mode based on resource counts and system
- * capabilities
- */
-
- err = enic_set_intr_mode(enic);
- if (err) {
- printk(KERN_ERR PFX
- "Failed to set intr mode, aborting.\n");
- goto err_out_dev_close;
- }
-
- /* Allocate and configure vNIC resources
- */
-
- err = enic_alloc_vnic_resources(enic);
- if (err) {
- printk(KERN_ERR PFX
- "Failed to alloc vNIC resources, aborting.\n");
- goto err_out_free_vnic_resources;
- }
-
- enic_init_vnic_resources(enic);
-
- err = enic_set_niccfg(enic);
- if (err) {
- printk(KERN_ERR PFX
- "Failed to config nic, aborting.\n");
- goto err_out_free_vnic_resources;
- }
-
/* Setup notification timer, HW reset task, and locks
*/
@@ -1837,23 +1996,15 @@
if (err) {
printk(KERN_ERR PFX
"Invalid MAC address, aborting.\n");
- goto err_out_free_vnic_resources;
+ goto err_out_dev_deinit;
}
netdev->netdev_ops = &enic_netdev_ops;
netdev->watchdog_timeo = 2 * HZ;
netdev->ethtool_ops = &enic_ethtool_ops;
- switch (vnic_dev_get_intr_mode(enic->vdev)) {
- default:
- netif_napi_add(netdev, &enic->napi, enic_poll, 64);
- break;
- case VNIC_DEV_INTR_MODE_MSIX:
- netif_napi_add(netdev, &enic->napi, enic_poll_msix, 64);
- break;
- }
-
- netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->features |= NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
if (ENIC_SETTING(enic, TXCSUM))
netdev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
if (ENIC_SETTING(enic, TSO))
@@ -1879,17 +2030,16 @@
if (err) {
printk(KERN_ERR PFX
"Cannot register net device, aborting.\n");
- goto err_out_free_vnic_resources;
+ goto err_out_dev_deinit;
}
return 0;
-err_out_free_vnic_resources:
- enic_free_vnic_resources(enic);
+err_out_dev_deinit:
+ enic_dev_deinit(enic);
err_out_dev_close:
vnic_dev_close(enic->vdev);
err_out_vnic_unregister:
- enic_clear_intr_mode(enic);
vnic_dev_unregister(enic->vdev);
err_out_iounmap:
enic_iounmap(enic);
@@ -1913,9 +2063,8 @@
flush_scheduled_work();
unregister_netdev(netdev);
- enic_free_vnic_resources(enic);
+ enic_dev_deinit(enic);
vnic_dev_close(enic->vdev);
- enic_clear_intr_mode(enic);
vnic_dev_unregister(enic->vdev);
enic_iounmap(enic);
pci_release_regions(pdev);
diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c
index e5fc938..3211114 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/enic/enic_res.c
@@ -156,6 +156,22 @@
return vnic_dev_cmd(enic->vdev, CMD_NIC_CFG, &a0, &a1, wait);
}
+int enic_set_rss_key(struct enic *enic, dma_addr_t key_pa, u64 len)
+{
+ u64 a0 = (u64)key_pa, a1 = len;
+ int wait = 1000;
+
+ return vnic_dev_cmd(enic->vdev, CMD_RSS_KEY, &a0, &a1, wait);
+}
+
+int enic_set_rss_cpu(struct enic *enic, dma_addr_t cpu_pa, u64 len)
+{
+ u64 a0 = (u64)cpu_pa, a1 = len;
+ int wait = 1000;
+
+ return vnic_dev_cmd(enic->vdev, CMD_RSS_CPU, &a0, &a1, wait);
+}
+
void enic_free_vnic_resources(struct enic *enic)
{
unsigned int i;
@@ -172,11 +188,18 @@
void enic_get_res_counts(struct enic *enic)
{
- enic->wq_count = vnic_dev_get_res_count(enic->vdev, RES_TYPE_WQ);
- enic->rq_count = vnic_dev_get_res_count(enic->vdev, RES_TYPE_RQ);
- enic->cq_count = vnic_dev_get_res_count(enic->vdev, RES_TYPE_CQ);
- enic->intr_count = vnic_dev_get_res_count(enic->vdev,
- RES_TYPE_INTR_CTRL);
+ enic->wq_count = min_t(int,
+ vnic_dev_get_res_count(enic->vdev, RES_TYPE_WQ),
+ ENIC_WQ_MAX);
+ enic->rq_count = min_t(int,
+ vnic_dev_get_res_count(enic->vdev, RES_TYPE_RQ),
+ ENIC_RQ_MAX);
+ enic->cq_count = min_t(int,
+ vnic_dev_get_res_count(enic->vdev, RES_TYPE_CQ),
+ ENIC_CQ_MAX);
+ enic->intr_count = min_t(int,
+ vnic_dev_get_res_count(enic->vdev, RES_TYPE_INTR_CTRL),
+ ENIC_INTR_MAX);
printk(KERN_INFO PFX "vNIC resources avail: "
"wq %d rq %d cq %d intr %d\n",
diff --git a/drivers/net/enic/enic_res.h b/drivers/net/enic/enic_res.h
index 7bf272f..abc1974 100644
--- a/drivers/net/enic/enic_res.h
+++ b/drivers/net/enic/enic_res.h
@@ -139,6 +139,8 @@
int enic_set_nic_cfg(struct enic *enic, u8 rss_default_cpu, u8 rss_hash_type,
u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable, u8 tso_ipid_split_en,
u8 ig_vlan_strip_en);
+int enic_set_rss_key(struct enic *enic, dma_addr_t key_pa, u64 len);
+int enic_set_rss_cpu(struct enic *enic, dma_addr_t cpu_pa, u64 len);
void enic_get_res_counts(struct enic *enic);
void enic_init_vnic_resources(struct enic *enic);
int enic_alloc_vnic_resources(struct enic *);
diff --git a/drivers/net/enic/vnic_dev.c b/drivers/net/enic/vnic_dev.c
index e21b9d6..29a48e8 100644
--- a/drivers/net/enic/vnic_dev.c
+++ b/drivers/net/enic/vnic_dev.c
@@ -31,6 +31,7 @@
struct vnic_res {
void __iomem *vaddr;
+ dma_addr_t bus_addr;
unsigned int count;
};
@@ -67,12 +68,15 @@
}
static int vnic_dev_discover_res(struct vnic_dev *vdev,
- struct vnic_dev_bar *bar)
+ struct vnic_dev_bar *bar, unsigned int num_bars)
{
struct vnic_resource_header __iomem *rh;
struct vnic_resource __iomem *r;
u8 type;
+ if (num_bars == 0)
+ return -EINVAL;
+
if (bar->len < VNIC_MAX_RES_HDR_SIZE) {
printk(KERN_ERR "vNIC BAR0 res hdr length error\n");
return -EINVAL;
@@ -104,7 +108,10 @@
r++;
- if (bar_num != 0) /* only mapping in BAR0 resources */
+ if (bar_num >= num_bars)
+ continue;
+
+ if (!bar[bar_num].len || !bar[bar_num].vaddr)
continue;
switch (type) {
@@ -114,13 +121,13 @@
case RES_TYPE_INTR_CTRL:
/* each count is stride bytes long */
len = count * VNIC_RES_STRIDE;
- if (len + bar_offset > bar->len) {
+ if (len + bar_offset > bar[bar_num].len) {
printk(KERN_ERR "vNIC BAR0 resource %d "
"out-of-bounds, offset 0x%x + "
"size 0x%x > bar len 0x%lx\n",
type, bar_offset,
len,
- bar->len);
+ bar[bar_num].len);
return -EINVAL;
}
break;
@@ -133,7 +140,9 @@
}
vdev->res[type].count = count;
- vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset;
+ vdev->res[type].vaddr = (char __iomem *)bar[bar_num].vaddr +
+ bar_offset;
+ vdev->res[type].bus_addr = bar[bar_num].bus_addr + bar_offset;
}
return 0;
@@ -163,6 +172,21 @@
}
}
+dma_addr_t vnic_dev_get_res_bus_addr(struct vnic_dev *vdev,
+ enum vnic_res_type type, unsigned int index)
+{
+ switch (type) {
+ case RES_TYPE_WQ:
+ case RES_TYPE_RQ:
+ case RES_TYPE_CQ:
+ case RES_TYPE_INTR_CTRL:
+ return vdev->res[type].bus_addr +
+ index * VNIC_RES_STRIDE;
+ default:
+ return vdev->res[type].bus_addr;
+ }
+}
+
unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
unsigned int desc_count, unsigned int desc_size)
{
@@ -257,7 +281,7 @@
iowrite32(cmd, &devcmd->cmd);
if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT))
- return 0;
+ return 0;
for (delay = 0; delay < wait; delay++) {
@@ -325,6 +349,25 @@
return err;
}
+int vnic_dev_hw_version(struct vnic_dev *vdev, enum vnic_dev_hw_version *hw_ver)
+{
+ struct vnic_devcmd_fw_info *fw_info;
+ int err;
+
+ err = vnic_dev_fw_info(vdev, &fw_info);
+ if (err)
+ return err;
+
+ if (strncmp(fw_info->hw_version, "A1", sizeof("A1")) == 0)
+ *hw_ver = VNIC_DEV_HW_VER_A1;
+ else if (strncmp(fw_info->hw_version, "A2", sizeof("A2")) == 0)
+ *hw_ver = VNIC_DEV_HW_VER_A2;
+ else
+ *hw_ver = VNIC_DEV_HW_VER_UNKNOWN;
+
+ return 0;
+}
+
int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size,
void *value)
{
@@ -517,6 +560,20 @@
printk(KERN_ERR "Can't del addr [%pM], %d\n", addr, err);
}
+int vnic_dev_raise_intr(struct vnic_dev *vdev, u16 intr)
+{
+ u64 a0 = intr, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ err = vnic_dev_cmd(vdev, CMD_IAR, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR "Failed to raise INTR[%d], err %d\n",
+ intr, err);
+
+ return err;
+}
+
int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr)
{
u64 a0, a1;
@@ -684,7 +741,8 @@
}
struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
- void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar)
+ void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar,
+ unsigned int num_bars)
{
if (!vdev) {
vdev = kzalloc(sizeof(struct vnic_dev), GFP_ATOMIC);
@@ -695,7 +753,7 @@
vdev->priv = priv;
vdev->pdev = pdev;
- if (vnic_dev_discover_res(vdev, bar))
+ if (vnic_dev_discover_res(vdev, bar, num_bars))
goto err_out;
vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0);
diff --git a/drivers/net/enic/vnic_dev.h b/drivers/net/enic/vnic_dev.h
index 8aa8db2..fc5e3eb 100644
--- a/drivers/net/enic/vnic_dev.h
+++ b/drivers/net/enic/vnic_dev.h
@@ -41,6 +41,12 @@
}
#endif
+enum vnic_dev_hw_version {
+ VNIC_DEV_HW_VER_UNKNOWN,
+ VNIC_DEV_HW_VER_A1,
+ VNIC_DEV_HW_VER_A2,
+};
+
enum vnic_dev_intr_mode {
VNIC_DEV_INTR_MODE_UNKNOWN,
VNIC_DEV_INTR_MODE_INTX,
@@ -75,6 +81,8 @@
enum vnic_res_type type);
void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
unsigned int index);
+dma_addr_t vnic_dev_get_res_bus_addr(struct vnic_dev *vdev,
+ enum vnic_res_type type, unsigned int index);
unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
unsigned int desc_count, unsigned int desc_size);
void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring);
@@ -86,6 +94,8 @@
u64 *a0, u64 *a1, int wait);
int vnic_dev_fw_info(struct vnic_dev *vdev,
struct vnic_devcmd_fw_info **fw_info);
+int vnic_dev_hw_version(struct vnic_dev *vdev,
+ enum vnic_dev_hw_version *hw_ver);
int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size,
void *value);
int vnic_dev_stats_clear(struct vnic_dev *vdev);
@@ -96,6 +106,7 @@
void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr);
void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr);
int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr);
+int vnic_dev_raise_intr(struct vnic_dev *vdev, u16 intr);
int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr);
void vnic_dev_notify_unset(struct vnic_dev *vdev);
int vnic_dev_link_status(struct vnic_dev *vdev);
@@ -117,6 +128,7 @@
enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev);
void vnic_dev_unregister(struct vnic_dev *vdev);
struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
- void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar);
+ void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar,
+ unsigned int num_bars);
#endif /* _VNIC_DEV_H_ */
diff --git a/drivers/net/enic/vnic_devcmd.h b/drivers/net/enic/vnic_devcmd.h
index 2587f34..d78bbcc 100644
--- a/drivers/net/enic/vnic_devcmd.h
+++ b/drivers/net/enic/vnic_devcmd.h
@@ -105,14 +105,6 @@
CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ,
_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
- /* disable/enable promisc mode: (u8)a0=0/1 */
-/***** XXX DEPRECATED *****/
- CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10),
-
- /* disable/enable all-multi mode: (u8)a0=0/1 */
-/***** XXX DEPRECATED *****/
- CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11),
-
/* add addr from (u48)a0 */
CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE,
_CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
@@ -182,7 +174,9 @@
/* disable virtual link */
CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
- /* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */
+ /* stats dump sum of all vnic stats on same uplink in mem:
+ * (u64)a0=paddr
+ * (u16)a1=sizeof stats area */
CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
/* init status:
@@ -211,7 +205,12 @@
/* persistent binding info
* in: (u64)a0=paddr of arg
* (u32)a1=CMD_PERBI_XXX */
- CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
+ CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
+
+ /* Interrupt Assert Register functionality
+ * in: (u16)a0=interrupt number to assert
+ */
+ CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
};
/* flags for CMD_OPEN */
@@ -244,6 +243,7 @@
ERR_ENOMEM = 7,
ERR_ETIMEDOUT = 8,
ERR_ELINKDOWN = 9,
+ ERR_EMAXRES = 10,
};
struct vnic_devcmd_fw_info {
diff --git a/drivers/net/enic/vnic_intr.c b/drivers/net/enic/vnic_intr.c
index ddc38f8..1f8786d 100644
--- a/drivers/net/enic/vnic_intr.c
+++ b/drivers/net/enic/vnic_intr.c
@@ -60,3 +60,8 @@
{
iowrite32(0, &intr->ctrl->int_credits);
}
+
+void vnic_intr_raise(struct vnic_intr *intr)
+{
+ vnic_dev_raise_intr(intr->vdev, (u16)intr->index);
+}
diff --git a/drivers/net/enic/vnic_nic.h b/drivers/net/enic/vnic_nic.h
index dadf26f..eeaf329 100644
--- a/drivers/net/enic/vnic_nic.h
+++ b/drivers/net/enic/vnic_nic.h
@@ -41,6 +41,13 @@
#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD 1UL
#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT 24
+#define NIC_CFG_RSS_HASH_TYPE_IPV4 (1 << 0)
+#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV4 (1 << 1)
+#define NIC_CFG_RSS_HASH_TYPE_IPV6 (1 << 2)
+#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV6 (1 << 3)
+#define NIC_CFG_RSS_HASH_TYPE_IPV6_EX (1 << 4)
+#define NIC_CFG_RSS_HASH_TYPE_TCP_IPV6_EX (1 << 5)
+
static inline void vnic_set_nic_cfg(u32 *nic_cfg,
u8 rss_default_cpu, u8 rss_hash_type,
u8 rss_hash_bits, u8 rss_base_cpu,
diff --git a/drivers/net/enic/vnic_rq.c b/drivers/net/enic/vnic_rq.c
index 9365e63..7558397 100644
--- a/drivers/net/enic/vnic_rq.c
+++ b/drivers/net/enic/vnic_rq.c
@@ -62,7 +62,6 @@
}
rq->to_use = rq->to_clean = rq->bufs[0];
- rq->buf_index = 0;
return 0;
}
@@ -113,12 +112,12 @@
return 0;
}
-void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+void vnic_rq_init_start(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int fetch_index, unsigned int posted_index,
unsigned int error_interrupt_enable,
unsigned int error_interrupt_offset)
{
u64 paddr;
- u32 fetch_index;
paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET;
writeq(paddr, &rq->ctrl->ring_base);
@@ -128,15 +127,27 @@
iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset);
iowrite32(0, &rq->ctrl->dropped_packet_count);
iowrite32(0, &rq->ctrl->error_status);
+ iowrite32(fetch_index, &rq->ctrl->fetch_index);
+ iowrite32(posted_index, &rq->ctrl->posted_index);
- /* Use current fetch_index as the ring starting point */
- fetch_index = ioread32(&rq->ctrl->fetch_index);
rq->to_use = rq->to_clean =
&rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
[fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
- iowrite32(fetch_index, &rq->ctrl->posted_index);
+}
- rq->buf_index = 0;
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u32 fetch_index;
+
+ /* Use current fetch_index as the ring starting point */
+ fetch_index = ioread32(&rq->ctrl->fetch_index);
+
+ vnic_rq_init_start(rq, cq_index,
+ fetch_index, fetch_index,
+ error_interrupt_enable,
+ error_interrupt_offset);
}
unsigned int vnic_rq_error_status(struct vnic_rq *rq)
@@ -192,8 +203,6 @@
[fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
iowrite32(fetch_index, &rq->ctrl->posted_index);
- rq->buf_index = 0;
-
vnic_dev_clear_desc_ring(&rq->ring);
}
diff --git a/drivers/net/enic/vnic_rq.h b/drivers/net/enic/vnic_rq.h
index fd0ef66..35e736c 100644
--- a/drivers/net/enic/vnic_rq.h
+++ b/drivers/net/enic/vnic_rq.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2008, 2009 Cisco Systems, Inc. All rights reserved.
* Copyright 2007 Nuova Systems, Inc. All rights reserved.
*
* This program is free software; you may redistribute it and/or modify
@@ -79,7 +79,6 @@
struct vnic_rq_buf *to_use;
struct vnic_rq_buf *to_clean;
void *os_buf_head;
- unsigned int buf_index;
unsigned int pkts_outstanding;
};
@@ -105,11 +104,6 @@
return rq->to_use->index;
}
-static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq)
-{
- return rq->buf_index++;
-}
-
static inline void vnic_rq_post(struct vnic_rq *rq,
void *os_buf, unsigned int os_buf_index,
dma_addr_t dma_addr, unsigned int len)
@@ -143,6 +137,11 @@
}
}
+static inline int vnic_rq_posting_soon(struct vnic_rq *rq)
+{
+ return ((rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0);
+}
+
static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count)
{
rq->ring.desc_avail += count;
@@ -186,7 +185,7 @@
{
int err;
- while (vnic_rq_desc_avail(rq) > 1) {
+ while (vnic_rq_desc_avail(rq) > 0) {
err = (*buf_fill)(rq);
if (err)
@@ -199,6 +198,10 @@
void vnic_rq_free(struct vnic_rq *rq);
int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
unsigned int desc_count, unsigned int desc_size);
+void vnic_rq_init_start(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int fetch_index, unsigned int posted_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
unsigned int error_interrupt_enable,
unsigned int error_interrupt_offset);
diff --git a/drivers/net/enic/vnic_wq.c b/drivers/net/enic/vnic_wq.c
index a576d04..d2e00e5 100644
--- a/drivers/net/enic/vnic_wq.c
+++ b/drivers/net/enic/vnic_wq.c
@@ -112,7 +112,8 @@
return 0;
}
-void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+void vnic_wq_init_start(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int fetch_index, unsigned int posted_index,
unsigned int error_interrupt_enable,
unsigned int error_interrupt_offset)
{
@@ -121,12 +122,25 @@
paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
writeq(paddr, &wq->ctrl->ring_base);
iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
- iowrite32(0, &wq->ctrl->fetch_index);
- iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(fetch_index, &wq->ctrl->fetch_index);
+ iowrite32(posted_index, &wq->ctrl->posted_index);
iowrite32(cq_index, &wq->ctrl->cq_index);
iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
iowrite32(0, &wq->ctrl->error_status);
+
+ wq->to_use = wq->to_clean =
+ &wq->bufs[fetch_index / VNIC_WQ_BUF_BLK_ENTRIES]
+ [fetch_index % VNIC_WQ_BUF_BLK_ENTRIES];
+}
+
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ vnic_wq_init_start(wq, cq_index, 0, 0,
+ error_interrupt_enable,
+ error_interrupt_offset);
}
unsigned int vnic_wq_error_status(struct vnic_wq *wq)
diff --git a/drivers/net/enic/vnic_wq.h b/drivers/net/enic/vnic_wq.h
index c826137..9c34d41 100644
--- a/drivers/net/enic/vnic_wq.h
+++ b/drivers/net/enic/vnic_wq.h
@@ -149,6 +149,10 @@
void vnic_wq_free(struct vnic_wq *wq);
int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_init_start(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int fetch_index, unsigned int posted_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
unsigned int error_interrupt_enable,
unsigned int error_interrupt_offset);
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 88d7ebf..641a10d 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -298,7 +298,8 @@
static void epic_timer(unsigned long data);
static void epic_tx_timeout(struct net_device *dev);
static void epic_init_ring(struct net_device *dev);
-static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t epic_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int epic_rx(struct net_device *dev, int budget);
static int epic_poll(struct napi_struct *napi, int budget);
static irqreturn_t epic_interrupt(int irq, void *dev_instance);
@@ -961,7 +962,7 @@
return;
}
-static int epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct epic_private *ep = netdev_priv(dev);
int entry, free_count;
@@ -969,7 +970,7 @@
unsigned long flags;
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
/* Caution: the write order is important here, set the field with the
"ownership" bit last. */
@@ -1013,7 +1014,7 @@
dev->name, (int)skb->len, entry, ctrl_word,
(int)inl(dev->base_addr + TxSTAT));
- return 0;
+ return NETDEV_TX_OK;
}
static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
diff --git a/drivers/net/eql.c b/drivers/net/eql.c
index 19b7dd9..d4d9a3e 100644
--- a/drivers/net/eql.c
+++ b/drivers/net/eql.c
@@ -127,7 +127,7 @@
static int eql_open(struct net_device *dev);
static int eql_close(struct net_device *dev);
static int eql_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-static int eql_slave_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t eql_slave_xmit(struct sk_buff *skb, struct net_device *dev);
#define eql_is_slave(dev) ((dev->flags & IFF_SLAVE) == IFF_SLAVE)
#define eql_is_master(dev) ((dev->flags & IFF_MASTER) == IFF_MASTER)
@@ -325,7 +325,7 @@
return best_slave;
}
-static int eql_slave_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t eql_slave_xmit(struct sk_buff *skb, struct net_device *dev)
{
equalizer_t *eql = netdev_priv(dev);
slave_t *slave;
@@ -348,7 +348,7 @@
spin_unlock(&eql->queue.lock);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index 0d8b6da..71bfeec 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -405,7 +405,7 @@
static void eth16i_eeprom_cmd(int ioaddr, unsigned char command);
static int eth16i_open(struct net_device *dev);
static int eth16i_close(struct net_device *dev);
-static int eth16i_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev);
static void eth16i_rx(struct net_device *dev);
static void eth16i_timeout(struct net_device *dev);
static irqreturn_t eth16i_interrupt(int irq, void *dev_id);
@@ -1053,7 +1053,7 @@
netif_wake_queue(dev);
}
-static int eth16i_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev)
{
struct eth16i_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
@@ -1064,7 +1064,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
buf = skb->data;
@@ -1126,7 +1126,7 @@
/* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
status = 0;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void eth16i_rx(struct net_device *dev)
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index ceb6a9c..b7311bc 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -404,7 +404,6 @@
void *src = priv->membase + bd.addr;
memcpy_fromio(skb_put(skb, size), src, size);
skb->protocol = eth_type_trans(skb, dev);
- dev->last_rx = jiffies;
priv->stats.rx_packets++;
priv->stats.rx_bytes += size;
netif_receive_skb(skb);
@@ -802,7 +801,7 @@
return &priv->stats;
}
-static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ethoc *priv = netdev_priv(dev);
struct ethoc_bd bd;
@@ -894,7 +893,7 @@
mmio = devm_request_mem_region(&pdev->dev, res->start,
res->end - res->start + 1, res->name);
- if (!res) {
+ if (!mmio) {
dev_err(&pdev->dev, "cannot request I/O memory space\n");
ret = -ENXIO;
goto free;
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index 1e97232..b2a5ec8 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -298,7 +298,7 @@
** Public Functions
*/
static int ewrk3_open(struct net_device *dev);
-static int ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t ewrk3_interrupt(int irq, void *dev_id);
static int ewrk3_close(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
@@ -764,7 +764,7 @@
/*
** Writes a socket buffer to the free page queue
*/
-static int ewrk3_queue_pkt (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev)
{
struct ewrk3_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
@@ -868,7 +868,7 @@
if (inb (EWRK3_FMQC) == 0)
netif_stop_queue (dev);
- return 0;
+ return NETDEV_TX_OK;
err_out:
ENABLE_IRQs;
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 160655d..18d5fbb 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -433,7 +433,7 @@
static void reset_timer(unsigned long data);
static void fealnx_tx_timeout(struct net_device *dev);
static void init_ring(struct net_device *dev);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static int netdev_rx(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
@@ -1305,7 +1305,7 @@
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
unsigned long flags;
@@ -1378,7 +1378,7 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&np->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index c9fd82d..b472018 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -367,7 +367,7 @@
spin_unlock_irqrestore(&fep->hw_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static void
@@ -427,7 +427,7 @@
struct sk_buff *skb;
fep = netdev_priv(dev);
- spin_lock_irq(&fep->hw_lock);
+ spin_lock(&fep->hw_lock);
bdp = fep->dirty_tx;
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
@@ -486,7 +486,7 @@
}
}
fep->dirty_tx = bdp;
- spin_unlock_irq(&fep->hw_lock);
+ spin_unlock(&fep->hw_lock);
}
@@ -509,7 +509,7 @@
flush_cache_all();
#endif
- spin_lock_irq(&fep->hw_lock);
+ spin_lock(&fep->hw_lock);
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
@@ -604,7 +604,7 @@
}
fep->cur_rx = bdp;
- spin_unlock_irq(&fep->hw_lock);
+ spin_unlock(&fep->hw_lock);
}
/* called from interrupt context */
@@ -615,7 +615,7 @@
mii_list_t *mip;
fep = netdev_priv(dev);
- spin_lock_irq(&fep->mii_lock);
+ spin_lock(&fep->mii_lock);
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
@@ -633,20 +633,19 @@
writel(mip->mii_regval, fep->hwp + FEC_MII_DATA);
unlock:
- spin_unlock_irq(&fep->mii_lock);
+ spin_unlock(&fep->mii_lock);
}
static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
+mii_queue_unlocked(struct net_device *dev, int regval,
+ void (*func)(uint, struct net_device *))
{
struct fec_enet_private *fep;
- unsigned long flags;
mii_list_t *mip;
int retval;
/* Add PHY address to register command */
fep = netdev_priv(dev);
- spin_lock_irqsave(&fep->mii_lock, flags);
regval |= fep->phy_addr << 23;
retval = 0;
@@ -667,6 +666,19 @@
retval = 1;
}
+ return retval;
+}
+
+static int
+mii_queue(struct net_device *dev, int regval,
+ void (*func)(uint, struct net_device *))
+{
+ struct fec_enet_private *fep;
+ unsigned long flags;
+ int retval;
+ fep = netdev_priv(dev);
+ spin_lock_irqsave(&fep->mii_lock, flags);
+ retval = mii_queue_unlocked(dev, regval, func);
spin_unlock_irqrestore(&fep->mii_lock, flags);
return retval;
}
@@ -1373,11 +1385,11 @@
/* Got first part of ID, now get remainder */
fep->phy_id = phytype << 16;
- mii_queue(dev, mk_mii_read(MII_REG_PHYIR2),
+ mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR2),
mii_discover_phy3);
} else {
fep->phy_addr++;
- mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
+ mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR1),
mii_discover_phy);
}
} else {
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index cc78633..c40113f 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -309,6 +309,7 @@
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
struct bcom_fec_bd *bd;
+ unsigned long flags;
if (bcom_queue_full(priv->tx_dmatsk)) {
if (net_ratelimit())
@@ -316,7 +317,7 @@
return NETDEV_TX_BUSY;
}
- spin_lock_irq(&priv->lock);
+ spin_lock_irqsave(&priv->lock, flags);
dev->trans_start = jiffies;
bd = (struct bcom_fec_bd *)
@@ -332,7 +333,7 @@
netif_stop_queue(dev);
}
- spin_unlock_irq(&priv->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 3b4e076..0a1c2bb 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2137,7 +2137,7 @@
* nv_start_xmit: dev->hard_start_xmit function
* Called with netif_tx_lock held.
*/
-static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
u32 tx_flags = 0;
@@ -2257,7 +2257,8 @@
return NETDEV_TX_OK;
}
-static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb,
+ struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
u32 tx_flags = 0;
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 75a0999..a2d69c1 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -36,6 +36,7 @@
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
+#include <asm/mpc5xxx.h>
#include "fs_enet.h"
#include "fec.h"
@@ -103,11 +104,11 @@
static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = NULL;
struct resource res;
struct mii_bus *new_bus;
struct fec_info *fec;
- int ret = -ENOMEM, i;
+ int (*get_bus_freq)(struct device_node *) = match->data;
+ int ret = -ENOMEM, clock, speed;
new_bus = mdiobus_alloc();
if (!new_bus)
@@ -133,13 +134,35 @@
if (!fec->fecp)
goto out_fec;
- fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
+ if (get_bus_freq) {
+ clock = get_bus_freq(ofdev->node);
+ if (!clock) {
+ /* Use maximum divider if clock is unknown */
+ dev_warn(&ofdev->dev, "could not determine IPS clock\n");
+ clock = 0x3F * 5000000;
+ }
+ } else
+ clock = ppc_proc_freq;
+
+ /*
+ * Scale for a MII clock <= 2.5 MHz
+ * Note that only 6 bits (25:30) are available for MII speed.
+ */
+ speed = (clock + 4999999) / 5000000;
+ if (speed > 0x3F) {
+ speed = 0x3F;
+ dev_err(&ofdev->dev,
+ "MII clock (%d Hz) exceeds max (2.5 MHz)\n",
+ clock / speed);
+ }
+
+ fec->mii_speed = speed << 1;
setbits32(&fec->fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
setbits32(&fec->fecp->fec_ecntrl, FEC_ECNTRL_PINMUX |
FEC_ECNTRL_ETHER_EN);
out_be32(&fec->fecp->fec_ievent, FEC_ENET_MII);
- out_be32(&fec->fecp->fec_mii_speed, fec->mii_speed);
+ clrsetbits_be32(&fec->fecp->fec_mii_speed, 0x7E, fec->mii_speed);
new_bus->phy_mask = ~0;
new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
@@ -188,6 +211,12 @@
{
.compatible = "fsl,pq1-fec-mdio",
},
+#if defined(CONFIG_PPC_MPC512x)
+ {
+ .compatible = "fsl,mpc5121-fec-mdio",
+ .data = mpc5xxx_get_bus_frequency,
+ },
+#endif
{},
};
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index e212f2c..1e5289f 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -297,7 +297,6 @@
u32 tempval;
struct net_device *dev = NULL;
struct gfar_private *priv = NULL;
- DECLARE_MAC_BUF(mac);
int err = 0;
int len_devname;
@@ -491,6 +490,7 @@
dev_set_drvdata(&ofdev->dev, NULL);
+ unregister_netdev(priv->ndev);
iounmap(priv->regs);
free_netdev(priv->ndev);
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index d62378c..1d5064a 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -557,7 +557,8 @@
static void hamachi_timer(unsigned long data);
static void hamachi_tx_timeout(struct net_device *dev);
static void hamachi_init_ring(struct net_device *dev);
-static int hamachi_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t hamachi_interrupt(int irq, void *dev_instance);
static int hamachi_rx(struct net_device *dev);
static inline int hamachi_tx(struct net_device *dev);
@@ -1263,7 +1264,8 @@
} while (0)
#endif
-static int hamachi_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hamachi_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct hamachi_private *hmp = netdev_priv(dev);
unsigned entry;
@@ -1372,7 +1374,7 @@
printk(KERN_DEBUG "%s: Hamachi transmit frame #%d queued in slot %d.\n",
dev->name, hmp->cur_tx, entry);
}
- return 0;
+ return NETDEV_TX_OK;
}
/* The interrupt handler does all of the Rx thread work and cleans up
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 981ab53..fb58830 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -242,7 +242,7 @@
/* Encapsulate an IP datagram and kick it into a TTY queue. */
-static int sp_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sp_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct sixpack *sp = netdev_priv(dev);
@@ -255,7 +255,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static int sp_open_dev(struct net_device *dev)
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 3527032..7bcaf7c 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -774,18 +774,18 @@
if (skb->data[0] != 0) {
do_kiss_params(bc, skb->data, skb->len);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (bc->skb)
return NETDEV_TX_LOCKED;
/* strip KISS byte */
if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue(dev);
bc->skb = skb;
- return 0;
+ return NETDEV_TX_OK;
}
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index abcd19a..fe893c9 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -247,9 +247,8 @@
/*
* Send an AX.25 frame via an ethernet interface
*/
-static int bpq_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t bpq_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct sk_buff *newskb;
unsigned char *ptr;
struct bpqdev *bpq;
int size;
@@ -263,28 +262,23 @@
return NETDEV_TX_OK;
}
- skb_pull(skb, 1);
+ skb_pull(skb, 1); /* Drop KISS byte */
size = skb->len;
/*
- * The AX.25 code leaves enough room for the ethernet header, but
- * sendto() does not.
+ * We're about to mess with the skb which may still shared with the
+ * generic networking code so unshare and ensure it's got enough
+ * space for the BPQ headers.
*/
- if (skb_headroom(skb) < AX25_BPQ_HEADER_LEN) { /* Ough! */
- if ((newskb = skb_realloc_headroom(skb, AX25_BPQ_HEADER_LEN)) == NULL) {
- printk(KERN_WARNING "bpqether: out of memory\n");
- kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- if (skb->sk != NULL)
- skb_set_owner_w(newskb, skb->sk);
-
+ if (skb_cow(skb, AX25_BPQ_HEADER_LEN)) {
+ if (net_ratelimit())
+ pr_err("bpqether: out of memory\n");
kfree_skb(skb);
- skb = newskb;
+
+ return NETDEV_TX_OK;
}
- ptr = skb_push(skb, 2);
+ ptr = skb_push(skb, 2); /* Make space for length */
*ptr++ = (size + 5) % 256;
*ptr++ = (size + 5) / 256;
@@ -305,7 +299,7 @@
dev_queue_xmit(skb);
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 7459b3a..950f3bb 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -959,7 +959,7 @@
spin_unlock_irqrestore(&priv->ring_lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c
index d034f8c..0013c40 100644
--- a/drivers/net/hamradio/hdlcdrv.c
+++ b/drivers/net/hamradio/hdlcdrv.c
@@ -399,20 +399,21 @@
* ===================== network driver interface =========================
*/
-static int hdlcdrv_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hdlcdrv_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct hdlcdrv_state *sm = netdev_priv(dev);
if (skb->data[0] != 0) {
do_kiss_params(sm, skb->data, skb->len);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (sm->skb)
return NETDEV_TX_LOCKED;
netif_stop_queue(dev);
sm->skb = skb;
- return 0;
+ return NETDEV_TX_OK;
}
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index fda2fc8..33b55f7 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -525,7 +525,7 @@
}
/* Encapsulate an AX.25 packet and kick it into a TTY queue. */
-static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ax_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct mkiss *ax = netdev_priv(dev);
@@ -560,7 +560,7 @@
kfree_skb(skb);
}
- return 0;
+ return NETDEV_TX_OK;
}
static int ax_open_dev(struct net_device *dev)
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index d712e7a..35c9361 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -209,7 +209,8 @@
static int scc_net_open(struct net_device *dev);
static int scc_net_close(struct net_device *dev);
static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
-static int scc_net_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t scc_net_tx(struct sk_buff *skb,
+ struct net_device *dev);
static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static int scc_net_set_mac_address(struct net_device *dev, void *addr);
static struct net_device_stats * scc_net_get_stats(struct net_device *dev);
@@ -1634,7 +1635,7 @@
/* ----> transmit frame <---- */
-static int scc_net_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev)
{
struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
unsigned long flags;
@@ -1643,7 +1644,7 @@
if (skb->len > scc->stat.bufsize || skb->len < 2) {
scc->dev_stat.tx_dropped++; /* bogus frame */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
scc->dev_stat.tx_packets++;
@@ -1656,7 +1657,7 @@
if (kisscmd) {
scc_set_param(scc, kisscmd, *skb->data);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&scc->lock, flags);
@@ -1684,7 +1685,7 @@
__scc_start_tx_timer(scc, t_dwait, 0);
}
spin_unlock_irqrestore(&scc->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* ----> ioctl functions <---- */
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index b066919..694132e 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -594,13 +594,14 @@
outb(PTT_OFF, MCR(dev->base_addr));
}
-static int yam_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t yam_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct yam_port *yp = netdev_priv(dev);
skb_queue_tail(&yp->send_queue, skb);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 1d3429a..a9a1a99 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -240,9 +240,10 @@
static int hp100_open(struct net_device *dev);
static int hp100_close(struct net_device *dev);
-static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int hp100_start_xmit_bm(struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t hp100_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
+ struct net_device *dev);
static void hp100_rx(struct net_device *dev);
static struct net_device_stats *hp100_get_stats(struct net_device *dev);
static void hp100_misc_interrupt(struct net_device *dev);
@@ -1483,7 +1484,8 @@
*/
/* tx function for busmaster mode */
-static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
+ struct net_device *dev)
{
unsigned long flags;
int i, ok_flag;
@@ -1499,7 +1501,7 @@
goto drop;
if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
/* Get Tx ring tail pointer */
if (lp->txrtail->next == lp->txrhead) {
@@ -1585,7 +1587,7 @@
lp->stats.tx_bytes += skb->len;
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
drop:
dev_kfree_skb(skb);
@@ -1635,7 +1637,8 @@
}
/* tx function for slave modes */
-static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hp100_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
unsigned long flags;
int i, ok_flag;
@@ -1752,7 +1755,7 @@
printk("hp100: %s: start_xmit: end\n", dev->name);
#endif
- return 0;
+ return NETDEV_TX_OK;
drop:
dev_kfree_skb(skb);
diff --git a/drivers/net/hydra.c b/drivers/net/hydra.c
index 8ac0930..d496b6f 100644
--- a/drivers/net/hydra.c
+++ b/drivers/net/hydra.c
@@ -173,9 +173,9 @@
zorro_set_drvdata(z, dev);
- printk(KERN_INFO "%s: Hydra at 0x%08lx, address "
+ printk(KERN_INFO "%s: Hydra at 0x%08llx, address "
"%pM (hydra.c " HYDRA_VERSION ")\n",
- dev->name, z->resource.start, dev->dev_addr);
+ dev->name, (unsigned long long)z->resource.start, dev->dev_addr);
return 0;
}
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index beb8421..1d7d7fe 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1305,6 +1305,8 @@
free_irq(dev->emac_irq, dev);
+ netif_carrier_off(ndev);
+
return 0;
}
@@ -1342,7 +1344,7 @@
++dev->stats.tx_packets;
dev->stats.tx_bytes += len;
- return 0;
+ return NETDEV_TX_OK;
}
/* Tx lock BH */
@@ -2207,7 +2209,7 @@
static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
struct emac_instance *dev = netdev_priv(ndev);
- uint16_t *data = (uint16_t *) & rq->ifr_ifru;
+ struct mii_ioctl_data *data = if_mii(rq);
DBG(dev, "ioctl %08x" NL, cmd);
@@ -2216,19 +2218,16 @@
switch (cmd) {
case SIOCGMIIPHY:
- case SIOCDEVPRIVATE:
- data[0] = dev->phy.address;
+ data->phy_id = dev->phy.address;
/* Fall through */
case SIOCGMIIREG:
- case SIOCDEVPRIVATE + 1:
- data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
+ data->val_out = emac_mdio_read(ndev, dev->phy.address,
+ data->reg_num);
return 0;
case SIOCSMIIREG:
- case SIOCDEVPRIVATE + 2:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
+ emac_mdio_write(ndev, dev->phy.address, data->reg_num,
+ data->val_in);
return 0;
default:
return -EOPNOTSUPP;
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 448098d..090a6d3 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -812,7 +812,7 @@
/* transmit a block. */
-static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev)
{
ibmlana_priv *priv = netdev_priv(dev);
int tmplen, addr;
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 0995c43..5862282 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -887,7 +887,8 @@
#define page_offset(v) ((unsigned long)(v) & ((1 << 12) - 1))
-static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev_priv(netdev);
union ibmveth_buf_desc desc;
@@ -971,7 +972,7 @@
spin_unlock_irqrestore(&adapter->stats_lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static int ibmveth_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 96713ef..801f088 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -59,7 +59,7 @@
static int numifbs = 2;
static void ri_tasklet(unsigned long dev);
-static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ifb_xmit(struct sk_buff *skb, struct net_device *dev);
static int ifb_open(struct net_device *dev);
static int ifb_close(struct net_device *dev);
@@ -160,11 +160,10 @@
random_ether_addr(dev->dev_addr);
}
-static int ifb_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ifb_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ifb_private *dp = netdev_priv(dev);
struct net_device_stats *stats = &dev->stats;
- int ret = 0;
u32 from = G_TC_FROM(skb->tc_verd);
stats->rx_packets++;
@@ -173,7 +172,7 @@
if (!(from & (AT_INGRESS|AT_EGRESS)) || !skb->iif) {
dev_kfree_skb(skb);
stats->rx_dropped++;
- return ret;
+ return NETDEV_TX_OK;
}
if (skb_queue_len(&dp->rq) >= dev->tx_queue_len) {
@@ -187,7 +186,7 @@
tasklet_schedule(&dp->ifb_tasklet);
}
- return ret;
+ return NETDEV_TX_OK;
}
static int ifb_close(struct net_device *dev)
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index ac28dd5..6158c0f 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -53,7 +53,7 @@
static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
-static s32 igb_configure_pcs_link_82575(struct e1000_hw *);
+static void igb_configure_pcs_link_82575(struct e1000_hw *);
static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
u16 *);
static s32 igb_get_phy_id_82575(struct e1000_hw *);
@@ -61,6 +61,7 @@
static bool igb_sgmii_active_82575(struct e1000_hw *);
static s32 igb_reset_init_script_82575(struct e1000_hw *);
static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
static s32 igb_get_invariants_82575(struct e1000_hw *hw)
{
@@ -84,6 +85,7 @@
case E1000_DEV_ID_82576_FIBER:
case E1000_DEV_ID_82576_SERDES:
case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_SERDES_QUAD:
mac->type = e1000_82576;
break;
default:
@@ -170,6 +172,10 @@
size = 14;
nvm->word_size = 1 << size;
+ /* if 82576 then initialize mailbox parameters */
+ if (mac->type == e1000_82576)
+ igb_init_mbx_params_pf(hw);
+
/* setup PHY parameters */
if (phy->media_type != e1000_media_type_copper) {
phy->type = e1000_phy_none;
@@ -219,10 +225,6 @@
return -E1000_ERR_PHY;
}
- /* if 82576 then initialize mailbox parameters */
- if (mac->type == e1000_82576)
- igb_init_mbx_params_pf(hw);
-
return 0;
}
@@ -764,98 +766,6 @@
}
/**
- * igb_init_rx_addrs_82575 - Initialize receive address's
- * @hw: pointer to the HW structure
- * @rar_count: receive address registers
- *
- * Setups the receive address registers by setting the base receive address
- * register to the devices MAC address and clearing all the other receive
- * address registers to 0.
- **/
-static void igb_init_rx_addrs_82575(struct e1000_hw *hw, u16 rar_count)
-{
- u32 i;
- u8 addr[6] = {0,0,0,0,0,0};
- /*
- * This function is essentially the same as that of
- * e1000_init_rx_addrs_generic. However it also takes care
- * of the special case where the register offset of the
- * second set of RARs begins elsewhere. This is implicitly taken care by
- * function e1000_rar_set_generic.
- */
-
- hw_dbg("e1000_init_rx_addrs_82575");
-
- /* Setup the receive address */
- hw_dbg("Programming MAC Address into RAR[0]\n");
- hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
- /* Zero out the other (rar_entry_count - 1) receive addresses */
- hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
- for (i = 1; i < rar_count; i++)
- hw->mac.ops.rar_set(hw, addr, i);
-}
-
-/**
- * igb_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- * @rar_used_count: the first RAR register free to program
- * @rar_count: total number of supported Receive Address Registers
- *
- * Updates the Receive Address Registers and Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- * The parameter rar_count will usually be hw->mac.rar_entry_count
- * unless there are workarounds that change this.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count,
- u32 rar_used_count, u32 rar_count)
-{
- u32 hash_value;
- u32 i;
- u8 addr[6] = {0,0,0,0,0,0};
- /*
- * This function is essentially the same as that of
- * igb_update_mc_addr_list_generic. However it also takes care
- * of the special case where the register offset of the
- * second set of RARs begins elsewhere. This is implicitly taken care by
- * function e1000_rar_set_generic.
- */
-
- /*
- * Load the first set of multicast addresses into the exact
- * filters (RAR). If there are not enough to fill the RAR
- * array, clear the filters.
- */
- for (i = rar_used_count; i < rar_count; i++) {
- if (mc_addr_count) {
- igb_rar_set(hw, mc_addr_list, i);
- mc_addr_count--;
- mc_addr_list += ETH_ALEN;
- } else {
- igb_rar_set(hw, addr, i);
- }
- }
-
- /* Clear the old settings from the MTA */
- hw_dbg("Clearing MTA\n");
- for (i = 0; i < hw->mac.mta_reg_count; i++) {
- array_wr32(E1000_MTA, i, 0);
- wrfl();
- }
-
- /* Load any remaining multicast addresses into the hash table. */
- for (; mc_addr_count > 0; mc_addr_count--) {
- hash_value = igb_hash_mc_addr(hw, mc_addr_list);
- hw_dbg("Hash value = 0x%03X\n", hash_value);
- igb_mta_set(hw, hash_value);
- mc_addr_list += ETH_ALEN;
- }
-}
-
-/**
* igb_shutdown_fiber_serdes_link_82575 - Remove link during power down
* @hw: pointer to the HW structure
*
@@ -866,9 +776,7 @@
{
u32 reg;
- if (hw->mac.type != e1000_82576 ||
- (hw->phy.media_type != e1000_media_type_fiber &&
- hw->phy.media_type != e1000_media_type_internal_serdes))
+ if (hw->phy.media_type != e1000_media_type_internal_serdes)
return;
/* if the management interface is not enabled, then power down */
@@ -911,6 +819,12 @@
if (ret_val)
hw_dbg("PCI-E Master disable polling has failed.\n");
+ /* set the completion timeout for interface */
+ ret_val = igb_set_pcie_completion_timeout(hw);
+ if (ret_val) {
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+ }
+
hw_dbg("Masking off all interrupts\n");
wr32(E1000_IMC, 0xffffffff);
@@ -943,7 +857,8 @@
wr32(E1000_IMC, 0xffffffff);
icr = rd32(E1000_ICR);
- igb_check_alt_mac_addr(hw);
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
return ret_val;
}
@@ -972,7 +887,8 @@
igb_clear_vfta(hw);
/* Setup the receive address */
- igb_init_rx_addrs_82575(hw, rar_count);
+ igb_init_rx_addrs(hw, rar_count);
+
/* Zero out the Multicast HASH table */
hw_dbg("Zeroing the MTA\n");
for (i = 0; i < mac->mta_reg_count; i++)
@@ -1002,7 +918,7 @@
**/
static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
{
- u32 ctrl, led_ctrl;
+ u32 ctrl;
s32 ret_val;
bool link;
@@ -1017,11 +933,6 @@
break;
case e1000_phy_igp_3:
ret_val = igb_copper_link_setup_igp(hw);
- /* Setup activity LED */
- led_ctrl = rd32(E1000_LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- wr32(E1000_LEDCTL, led_ctrl);
break;
default:
ret_val = -E1000_ERR_PHY;
@@ -1052,9 +963,7 @@
}
}
- ret_val = igb_configure_pcs_link_82575(hw);
- if (ret_val)
- goto out;
+ igb_configure_pcs_link_82575(hw);
/*
* Check link status. Wait up to 100 microseconds for link to become
@@ -1163,14 +1072,14 @@
* independent interface (sgmii) is being used. Configures the link
* for auto-negotiation or forces speed/duplex.
**/
-static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw)
+static void igb_configure_pcs_link_82575(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
u32 reg = 0;
if (hw->phy.media_type != e1000_media_type_copper ||
!(igb_sgmii_active_82575(hw)))
- goto out;
+ return;
/* For SGMII, we need to issue a PCS autoneg restart */
reg = rd32(E1000_PCS_LCTL);
@@ -1213,9 +1122,6 @@
reg);
}
wr32(E1000_PCS_LCTL, reg);
-
-out:
- return 0;
}
/**
@@ -1229,10 +1135,6 @@
static bool igb_sgmii_active_82575(struct e1000_hw *hw)
{
struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
-
- if (hw->mac.type != e1000_82575 && hw->mac.type != e1000_82576)
- return false;
-
return dev_spec->sgmii_active;
}
@@ -1424,6 +1326,57 @@
}
/**
+ * igb_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 200ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+ u32 gcr = rd32(E1000_GCR);
+ s32 ret_val = 0;
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & E1000_GCR_CAP_VER2)) {
+ gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(E1000_GCR, gcr);
+ return ret_val;
+}
+
+/**
* igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
* @hw: pointer to the hardware struct
* @enable: state to enter, either enabled or disabled
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index 0f16aba..8a1e659 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -28,10 +28,14 @@
#ifndef _E1000_82575_H_
#define _E1000_82575_H_
-void igb_update_mc_addr_list(struct e1000_hw*, u8*, u32, u32, u32);
extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw);
extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_ON2))
+
#define E1000_RAR_ENTRIES_82575 16
#define E1000_RAR_ENTRIES_82576 24
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index 3bda3db..c858293 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -435,6 +435,12 @@
/* Flow Control */
#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+/* PCI Express Control */
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
/* PHY Control Register */
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
@@ -569,9 +575,11 @@
/* PCI/PCI-X/PCI-EX Config space */
#define PCIE_LINK_STATUS 0x12
+#define PCIE_DEVICE_CONTROL2 0x28
#define PCIE_LINK_WIDTH_MASK 0x3F0
#define PCIE_LINK_WIDTH_SHIFT 4
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
#define PHY_REVISION_MASK 0xFFFFFFF0
#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 68aac20..119869b 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -42,6 +42,7 @@
#define E1000_DEV_ID_82576_SERDES 0x10E7
#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
#define E1000_DEV_ID_82576_NS 0x150A
+#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
#define E1000_DEV_ID_82575EB_COPPER 0x10A7
#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
@@ -61,8 +62,7 @@
enum e1000_media_type {
e1000_media_type_unknown = 0,
e1000_media_type_copper = 1,
- e1000_media_type_fiber = 2,
- e1000_media_type_internal_serdes = 3,
+ e1000_media_type_internal_serdes = 2,
e1000_num_media_types
};
@@ -137,7 +137,7 @@
e1000_rev_polarity_undefined = 0xFF
};
-enum e1000_fc_type {
+enum e1000_fc_mode {
e1000_fc_none = 0,
e1000_fc_rx_pause,
e1000_fc_tx_pause,
@@ -339,6 +339,10 @@
u16 ifs_ratio;
u16 ifs_step_size;
u16 mta_reg_count;
+
+ /* Maximum size of the MTA register table in all supported adapters */
+ #define MAX_MTA_REG 128
+ u32 mta_shadow[MAX_MTA_REG];
u16 rar_entry_count;
u8 forced_speed_duplex;
@@ -425,8 +429,8 @@
u16 pause_time; /* Flow control pause timer */
bool send_xon; /* Flow control send XON */
bool strict_ieee; /* Strict IEEE mode */
- enum e1000_fc_type type; /* Type of flow control */
- enum e1000_fc_type original_type;
+ enum e1000_fc_mode current_mode; /* Type of flow control */
+ enum e1000_fc_mode requested_mode;
};
struct e1000_mbx_operations {
@@ -495,5 +499,7 @@
#else
#define hw_dbg(format, arg...)
#endif
-
#endif
+/* These functions must be implemented by drivers */
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 472f3f1..a0231cd 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -37,20 +37,6 @@
static s32 igb_set_default_fc(struct e1000_hw *hw);
static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
-static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-{
- struct igb_adapter *adapter = hw->back;
- u16 cap_offset;
-
- cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
- if (!cap_offset)
- return -E1000_ERR_CONFIG;
-
- pci_read_config_word(adapter->pdev, cap_offset + reg, value);
-
- return 0;
-}
-
/**
* igb_get_bus_info_pcie - Get PCIe bus information
* @hw: pointer to the HW structure
@@ -118,6 +104,31 @@
}
/**
+ * igb_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * Setups the receive address registers by setting the base receive address
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
+
+ /* Setup the receive address */
+ hw_dbg("Programming MAC Address into RAR[0]\n");
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
+ hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+ for (i = 1; i < rar_count; i++)
+ hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
* igb_vfta_set - enable or disable vlan in VLAN filter table
* @hw: pointer to the HW structure
* @vid: VLAN id to add or remove
@@ -275,6 +286,41 @@
}
/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
+/**
* igb_hash_mc_addr - Generate a multicast hash value
* @hw: pointer to the HW structure
* @mc_addr: pointer to a multicast address
@@ -490,18 +536,24 @@
if (igb_check_reset_block(hw))
goto out;
- ret_val = igb_set_default_fc(hw);
- if (ret_val)
- goto out;
+ /*
+ * If requested flow control is set to default, set flow control
+ * based on the EEPROM flow control settings.
+ */
+ if (hw->fc.requested_mode == e1000_fc_default) {
+ ret_val = igb_set_default_fc(hw);
+ if (ret_val)
+ goto out;
+ }
/*
* We want to save off the original Flow Control configuration just
* in case we get disconnected and then reconnected into a different
* hub or switch with different Flow Control capabilities.
*/
- hw->fc.original_type = hw->fc.type;
+ hw->fc.current_mode = hw->fc.requested_mode;
- hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.type);
+ hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
/* Call the necessary media_type subroutine to configure the link. */
ret_val = hw->mac.ops.setup_physical_interface(hw);
@@ -568,7 +620,7 @@
* ability to transmit pause frames is not enabled, then these
* registers will be set to 0.
*/
- if (hw->fc.type & e1000_fc_tx_pause) {
+ if (hw->fc.current_mode & e1000_fc_tx_pause) {
/*
* We need to set up the Receive Threshold high and low water
* marks as well as (optionally) enabling the transmission of
@@ -615,12 +667,12 @@
}
if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
- hw->fc.type = e1000_fc_none;
+ hw->fc.requested_mode = e1000_fc_none;
else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
NVM_WORD0F_ASM_DIR)
- hw->fc.type = e1000_fc_tx_pause;
+ hw->fc.requested_mode = e1000_fc_tx_pause;
else
- hw->fc.type = e1000_fc_full;
+ hw->fc.requested_mode = e1000_fc_full;
out:
return ret_val;
@@ -650,7 +702,7 @@
* receive flow control.
*
* The "Case" statement below enables/disable flow control
- * according to the "hw->fc.type" parameter.
+ * according to the "hw->fc.current_mode" parameter.
*
* The possible values of the "fc" parameter are:
* 0: Flow control is completely disabled
@@ -661,9 +713,9 @@
* 3: Both Rx and TX flow control (symmetric) is enabled.
* other: No other values should be possible at this point.
*/
- hw_dbg("hw->fc.type = %u\n", hw->fc.type);
+ hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
- switch (hw->fc.type) {
+ switch (hw->fc.current_mode) {
case e1000_fc_none:
ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
break;
@@ -713,8 +765,7 @@
* configuration of the MAC to match the "fc" parameter.
*/
if (mac->autoneg_failed) {
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes)
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
ret_val = igb_force_mac_fc(hw);
} else {
if (hw->phy.media_type == e1000_media_type_copper)
@@ -812,11 +863,11 @@
* ONLY. Hence, we must now check to see if we need to
* turn OFF the TRANSMISSION of PAUSE frames.
*/
- if (hw->fc.original_type == e1000_fc_full) {
- hw->fc.type = e1000_fc_full;
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
hw_dbg("Flow Control = FULL.\r\n");
} else {
- hw->fc.type = e1000_fc_rx_pause;
+ hw->fc.current_mode = e1000_fc_rx_pause;
hw_dbg("Flow Control = "
"RX PAUSE frames only.\r\n");
}
@@ -833,7 +884,7 @@
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc.type = e1000_fc_tx_pause;
+ hw->fc.current_mode = e1000_fc_tx_pause;
hw_dbg("Flow Control = TX PAUSE frames only.\r\n");
}
/*
@@ -848,7 +899,7 @@
(mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
!(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc.type = e1000_fc_rx_pause;
+ hw->fc.current_mode = e1000_fc_rx_pause;
hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
}
/*
@@ -872,13 +923,13 @@
* be asked to delay transmission of packets than asking
* our link partner to pause transmission of frames.
*/
- else if ((hw->fc.original_type == e1000_fc_none ||
- hw->fc.original_type == e1000_fc_tx_pause) ||
+ else if ((hw->fc.requested_mode == e1000_fc_none ||
+ hw->fc.requested_mode == e1000_fc_tx_pause) ||
hw->fc.strict_ieee) {
- hw->fc.type = e1000_fc_none;
+ hw->fc.current_mode = e1000_fc_none;
hw_dbg("Flow Control = NONE.\r\n");
} else {
- hw->fc.type = e1000_fc_rx_pause;
+ hw->fc.current_mode = e1000_fc_rx_pause;
hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
}
@@ -894,7 +945,7 @@
}
if (duplex == HALF_DUPLEX)
- hw->fc.type = e1000_fc_none;
+ hw->fc.current_mode = e1000_fc_none;
/*
* Now we call a subroutine to actually force the MAC
@@ -1065,9 +1116,17 @@
goto out;
}
- if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
- *data = ID_LED_DEFAULT;
-
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch(hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_82575_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT;
+ break;
+ }
+ }
out:
return ret_val;
}
@@ -1161,22 +1220,16 @@
u32 ledctl_blink = 0;
u32 i;
- if (hw->phy.media_type == e1000_media_type_fiber) {
- /* always blink LED0 for PCI-E fiber */
- ledctl_blink = E1000_LEDCTL_LED0_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
- } else {
- /*
- * set the blink bit for each LED that's "on" (0x0E)
- * in ledctl_mode2
- */
- ledctl_blink = hw->mac.ledctl_mode2;
- for (i = 0; i < 4; i++)
- if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
- (i * 8));
- }
+ /*
+ * set the blink bit for each LED that's "on" (0x0E)
+ * in ledctl_mode2
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
+ (i * 8));
wr32(E1000_LEDCTL, ledctl_blink);
@@ -1191,15 +1244,7 @@
**/
s32 igb_led_off(struct e1000_hw *hw)
{
- u32 ctrl;
-
switch (hw->phy.media_type) {
- case e1000_media_type_fiber:
- ctrl = rd32(E1000_CTRL);
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- wr32(E1000_CTRL, ctrl);
- break;
case e1000_media_type_copper:
wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
break;
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
index 1d690b4..7518af8 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/igb/e1000_mac.h
@@ -51,6 +51,8 @@
u16 *duplex);
s32 igb_id_led_init(struct e1000_hw *hw);
s32 igb_led_off(struct e1000_hw *hw);
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count);
s32 igb_setup_link(struct e1000_hw *hw);
s32 igb_validate_mdi_setting(struct e1000_hw *hw);
s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
@@ -60,6 +62,7 @@
void igb_clear_vfta(struct e1000_hw *hw);
s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add);
void igb_config_collision_dist(struct e1000_hw *hw);
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
void igb_put_hw_semaphore(struct e1000_hw *hw);
void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index f50fac2..c1f4da6 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -735,7 +735,7 @@
* other: No software override. The flow control configuration
* in the EEPROM is used.
*/
- switch (hw->fc.type) {
+ switch (hw->fc.current_mode) {
case e1000_fc_none:
/*
* Flow control (RX & TX) is completely disabled by a
@@ -992,7 +992,7 @@
u32 ctrl;
/* Turn off flow control when forcing speed/duplex */
- hw->fc.type = e1000_fc_none;
+ hw->fc.current_mode = e1000_fc_none;
/* Force speed/duplex on the mac */
ctrl = rd32(E1000_CTRL);
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 6e59245..345d144 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -305,6 +305,7 @@
#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
#define E1000_SWSM 0x05B50 /* SW Semaphore */
#define E1000_FWSM 0x05B54 /* FW Semaphore */
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index b2c98de..7126fea 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -70,6 +70,7 @@
unsigned char vf_mac_addresses[ETH_ALEN];
u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
u16 num_vf_mc_hashes;
+ u16 vlans_enabled;
bool clear_to_send;
};
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 9598ac0..d004c35 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -168,8 +168,7 @@
ecmd->duplex = -1;
}
- ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
- hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
return 0;
}
@@ -191,23 +190,20 @@
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
- if (hw->phy.media_type == e1000_media_type_fiber)
- hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
- else
- hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
- } else
+ if (adapter->fc_autoneg)
+ hw->fc.requested_mode = e1000_fc_default;
+ } else {
if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
+ }
/* reset the link */
-
if (netif_running(adapter->netdev)) {
igb_down(adapter);
igb_up(adapter);
@@ -227,11 +223,11 @@
pause->autoneg =
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
- if (hw->fc.type == e1000_fc_rx_pause)
+ if (hw->fc.current_mode == e1000_fc_rx_pause)
pause->rx_pause = 1;
- else if (hw->fc.type == e1000_fc_tx_pause)
+ else if (hw->fc.current_mode == e1000_fc_tx_pause)
pause->tx_pause = 1;
- else if (hw->fc.type == e1000_fc_full) {
+ else if (hw->fc.current_mode == e1000_fc_full) {
pause->rx_pause = 1;
pause->tx_pause = 1;
}
@@ -249,26 +245,28 @@
while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
msleep(1);
- if (pause->rx_pause && pause->tx_pause)
- hw->fc.type = e1000_fc_full;
- else if (pause->rx_pause && !pause->tx_pause)
- hw->fc.type = e1000_fc_rx_pause;
- else if (!pause->rx_pause && pause->tx_pause)
- hw->fc.type = e1000_fc_tx_pause;
- else if (!pause->rx_pause && !pause->tx_pause)
- hw->fc.type = e1000_fc_none;
-
- hw->fc.original_type = hw->fc.type;
-
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ hw->fc.requested_mode = e1000_fc_default;
if (netif_running(adapter->netdev)) {
igb_down(adapter);
igb_up(adapter);
} else
igb_reset(adapter);
- } else
- retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
- igb_setup_link(hw) : igb_force_mac_fc(hw));
+ } else {
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_none;
+
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ retval = ((hw->phy.media_type == e1000_media_type_copper) ?
+ igb_force_mac_fc(hw) : igb_setup_link(hw));
+ }
clear_bit(__IGB_RESETTING, &adapter->state);
return retval;
@@ -1483,8 +1481,7 @@
struct e1000_hw *hw = &adapter->hw;
u32 reg;
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
reg = rd32(E1000_RCTL);
reg |= E1000_RCTL_LBM_TCVR;
wr32(E1000_RCTL, reg);
@@ -1843,7 +1840,6 @@
static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
{
struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
@@ -1852,11 +1848,6 @@
!device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
- switch (hw->device_id) {
- default:
- break;
- }
-
/* these settings will always override what we currently have */
adapter->wol = 0;
@@ -2025,7 +2016,7 @@
}
}
-static struct ethtool_ops igb_ethtool_ops = {
+static const struct ethtool_ops igb_ethtool_ops = {
.get_settings = igb_get_settings,
.set_settings = igb_set_settings,
.get_drvinfo = igb_get_drvinfo,
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index adb09d3..943186b 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -65,6 +65,7 @@
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
@@ -93,13 +94,15 @@
static void igb_clean_all_rx_rings(struct igb_adapter *);
static void igb_clean_tx_ring(struct igb_ring *);
static void igb_clean_rx_ring(struct igb_ring *);
-static void igb_set_multi(struct net_device *);
+static void igb_set_rx_mode(struct net_device *);
static void igb_update_phy_info(unsigned long);
static void igb_watchdog(unsigned long);
static void igb_watchdog_task(struct work_struct *);
-static int igb_xmit_frame_ring_adv(struct sk_buff *, struct net_device *,
- struct igb_ring *);
-static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
+static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *,
+ struct net_device *,
+ struct igb_ring *);
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
+ struct net_device *);
static struct net_device_stats *igb_get_stats(struct net_device *);
static int igb_change_mtu(struct net_device *, int);
static int igb_set_mac(struct net_device *, void *);
@@ -127,7 +130,7 @@
static void igb_ping_all_vfs(struct igb_adapter *);
static void igb_msg_task(struct igb_adapter *);
static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
+static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
static void igb_vmm_control(struct igb_adapter *);
static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
@@ -151,6 +154,12 @@
struct e1000_hw *hw = &adapter->hw;
u32 vmolr;
+ /* if it isn't the PF check to see if VFs are enabled and
+ * increase the size to support vlan tags */
+ if (vfn < adapter->vfs_allocated_count &&
+ adapter->vf_data[vfn].vlans_enabled)
+ size += VLAN_TAG_SIZE;
+
vmolr = rd32(E1000_VMOLR(vfn));
vmolr &= ~E1000_VMOLR_RLPML_MASK;
vmolr |= size | E1000_VMOLR_LPE;
@@ -818,9 +827,11 @@
struct e1000_hw *hw = &adapter->hw;
if (adapter->msix_entries) {
- wr32(E1000_EIAM, 0);
- wr32(E1000_EIMC, ~0);
- wr32(E1000_EIAC, 0);
+ u32 regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
+ wr32(E1000_EIMC, adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
}
wr32(E1000_IAM, 0);
@@ -838,8 +849,10 @@
struct e1000_hw *hw = &adapter->hw;
if (adapter->msix_entries) {
- wr32(E1000_EIAC, adapter->eims_enable_mask);
- wr32(E1000_EIAM, adapter->eims_enable_mask);
+ u32 regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
wr32(E1000_EIMS, adapter->eims_enable_mask);
if (adapter->vfs_allocated_count)
wr32(E1000_MBVFIMR, 0xFF);
@@ -925,7 +938,7 @@
int i;
igb_get_hw_control(adapter);
- igb_set_multi(netdev);
+ igb_set_rx_mode(netdev);
igb_restore_vlan(adapter);
@@ -1129,7 +1142,7 @@
}
fc->pause_time = 0xFFFF;
fc->send_xon = 1;
- fc->type = fc->original_type;
+ fc->current_mode = fc->requested_mode;
/* disable receive for all VFs and wait one second */
if (adapter->vfs_allocated_count) {
@@ -1166,7 +1179,8 @@
.ndo_stop = igb_close,
.ndo_start_xmit = igb_xmit_frame_adv,
.ndo_get_stats = igb_get_stats,
- .ndo_set_multicast_list = igb_set_multi,
+ .ndo_set_rx_mode = igb_set_rx_mode,
+ .ndo_set_multicast_list = igb_set_rx_mode,
.ndo_set_mac_address = igb_set_mac,
.ndo_change_mtu = igb_change_mtu,
.ndo_do_ioctl = igb_ioctl,
@@ -1379,6 +1393,7 @@
netdev->vlan_features |= NETIF_F_TSO;
netdev->vlan_features |= NETIF_F_TSO6;
netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
netdev->vlan_features |= NETIF_F_SG;
if (pci_using_dac)
@@ -1426,8 +1441,8 @@
hw->mac.autoneg = true;
hw->phy.autoneg_advertised = 0x2f;
- hw->fc.original_type = e1000_fc_default;
- hw->fc.type = e1000_fc_default;
+ hw->fc.requested_mode = e1000_fc_default;
+ hw->fc.current_mode = e1000_fc_default;
adapter->itr_setting = IGB_DEFAULT_ITR;
adapter->itr = IGB_START_ITR;
@@ -2515,75 +2530,94 @@
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
- hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
+ igb_rar_set(hw, hw->mac.addr, 0);
igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
return 0;
}
/**
- * igb_set_multi - Multicast and Promiscuous mode set
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
* promiscuous mode, and all-multi behavior.
**/
-static void igb_set_multi(struct net_device *netdev)
+static void igb_set_rx_mode(struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- struct e1000_mac_info *mac = &hw->mac;
- struct dev_mc_list *mc_ptr;
+ unsigned int rar_entries = hw->mac.rar_entry_count -
+ (adapter->vfs_allocated_count + 1);
+ struct dev_mc_list *mc_ptr = netdev->mc_list;
u8 *mta_list = NULL;
u32 rctl;
int i;
/* Check for Promiscuous and All Multicast modes */
-
rctl = rd32(E1000_RCTL);
if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
rctl &= ~E1000_RCTL_VFE;
} else {
- if (netdev->flags & IFF_ALLMULTI) {
+ if (netdev->flags & IFF_ALLMULTI)
rctl |= E1000_RCTL_MPE;
+ else
+ rctl &= ~E1000_RCTL_MPE;
+
+ if (netdev->uc.count > rar_entries)
+ rctl |= E1000_RCTL_UPE;
+ else
rctl &= ~E1000_RCTL_UPE;
- } else
- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
rctl |= E1000_RCTL_VFE;
}
wr32(E1000_RCTL, rctl);
- if (netdev->mc_count) {
- mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
- if (!mta_list) {
- dev_err(&adapter->pdev->dev,
- "failed to allocate multicast filter list\n");
- return;
+ if (netdev->uc.count && rar_entries) {
+ struct netdev_hw_addr *ha;
+ list_for_each_entry(ha, &netdev->uc.list, list) {
+ if (!rar_entries)
+ break;
+ igb_rar_set(hw, ha->addr, rar_entries);
+ igb_set_rah_pool(hw, adapter->vfs_allocated_count,
+ rar_entries);
+ rar_entries--;
}
}
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--) {
+ wr32(E1000_RAH(rar_entries), 0);
+ wr32(E1000_RAL(rar_entries), 0);
+ }
+ wrfl();
+
+ if (!netdev->mc_count) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0);
+ igb_restore_vf_multicasts(adapter);
+ return;
+ }
+
+ mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
+ if (!mta_list) {
+ dev_err(&adapter->pdev->dev,
+ "failed to allocate multicast filter list\n");
+ return;
+ }
/* The shared function expects a packed array of only addresses. */
- mc_ptr = netdev->mc_list;
-
for (i = 0; i < netdev->mc_count; i++) {
if (!mc_ptr)
break;
memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
mc_ptr = mc_ptr->next;
}
- igb_update_mc_addr_list(hw, mta_list, i,
- adapter->vfs_allocated_count + 1,
- mac->rar_entry_count);
-
- igb_set_mc_list_pools(adapter, i, mac->rar_entry_count);
- igb_restore_vf_multicasts(adapter);
-
+ igb_update_mc_addr_list(hw, mta_list, i);
kfree(mta_list);
+ igb_restore_vf_multicasts(adapter);
}
/* Need to wait a few seconds after link up to get diagnostic information from
@@ -2618,10 +2652,6 @@
link_active = true;
}
break;
- case e1000_media_type_fiber:
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !!(rd32(E1000_STATUS) & E1000_STATUS_LU);
- break;
case e1000_media_type_internal_serdes:
ret_val = hw->mac.ops.check_for_link(hw);
link_active = hw->mac.serdes_has_link;
@@ -3298,9 +3328,9 @@
return __igb_maybe_stop_tx(netdev, tx_ring, size);
}
-static int igb_xmit_frame_ring_adv(struct sk_buff *skb,
- struct net_device *netdev,
- struct igb_ring *tx_ring)
+static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
+ struct net_device *netdev,
+ struct igb_ring *tx_ring)
{
struct igb_adapter *adapter = netdev_priv(netdev);
unsigned int first;
@@ -3388,7 +3418,8 @@
return NETDEV_TX_OK;
}
-static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct igb_ring *tx_ring;
@@ -3401,7 +3432,7 @@
* to a flow. Right now, performance is impacted slightly negatively
* if using multiple tx queues. If the stack breaks away from a
* single qdisc implementation, we can look at this again. */
- return (igb_xmit_frame_ring_adv(skb, netdev, tx_ring));
+ return igb_xmit_frame_ring_adv(skb, netdev, tx_ring);
}
/**
@@ -3938,7 +3969,7 @@
vf_data->vf_mc_hashes[i] = hash_list[i];;
/* Flush and reset the mta with the new values */
- igb_set_multi(adapter->netdev);
+ igb_set_rx_mode(adapter->netdev);
return 0;
}
@@ -3981,6 +4012,8 @@
wr32(E1000_VLVF(i), reg);
}
+
+ adapter->vf_data[vf].vlans_enabled = 0;
}
static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
@@ -4029,6 +4062,22 @@
reg |= vid;
wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size += 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+ adapter->vf_data[vf].vlans_enabled++;
+
return 0;
}
} else {
@@ -4041,6 +4090,21 @@
igb_vfta_set(hw, vid, false);
}
wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ adapter->vf_data[vf].vlans_enabled--;
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size -= 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
return 0;
}
}
@@ -4072,13 +4136,14 @@
adapter->vf_data[vf].num_vf_mc_hashes = 0;
/* Flush and reset the mta with the new values */
- igb_set_multi(adapter->netdev);
+ igb_set_rx_mode(adapter->netdev);
}
static inline void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
{
struct e1000_hw *hw = &adapter->hw;
unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
u32 reg, msgbuf[3];
u8 *addr = (u8 *)(&msgbuf[1]);
@@ -4086,8 +4151,8 @@
igb_vf_reset_event(adapter, vf);
/* set vf mac address */
- igb_rar_set(hw, vf_mac, vf + 1);
- igb_set_rah_pool(hw, vf, vf + 1);
+ igb_rar_set(hw, vf_mac, rar_entry);
+ igb_set_rah_pool(hw, vf, rar_entry);
/* enable transmit and receive for vf */
reg = rd32(E1000_VFTE);
@@ -4542,6 +4607,20 @@
adapter->hw_csum_good++;
}
+static inline u16 igb_get_hlen(struct igb_adapter *adapter,
+ union e1000_adv_rx_desc *rx_desc)
+{
+ /* HW will not DMA in data larger than the given buffer, even if it
+ * parses the (NFS, of course) header to be larger. In that case, it
+ * fills the header buffer and spills the rest into the page.
+ */
+ u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
+ E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
+ if (hlen > adapter->rx_ps_hdr_size)
+ hlen = adapter->rx_ps_hdr_size;
+ return hlen;
+}
+
static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring,
int *work_done, int budget)
{
@@ -4556,7 +4635,8 @@
int cleaned_count = 0;
unsigned int total_bytes = 0, total_packets = 0;
unsigned int i;
- u32 length, hlen, staterr;
+ u32 staterr;
+ u16 length;
i = rx_ring->next_to_clean;
buffer_info = &rx_ring->buffer_info[i];
@@ -4593,17 +4673,8 @@
goto send_up;
}
- /* HW will not DMA in data larger than the given buffer, even
- * if it parses the (NFS, of course) header to be larger. In
- * that case, it fills the header buffer and spills the rest
- * into the page.
- */
- hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
- E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
- if (hlen > adapter->rx_ps_hdr_size)
- hlen = adapter->rx_ps_hdr_size;
-
- if (!skb_shinfo(skb)->nr_frags) {
+ if (buffer_info->dma) {
+ u16 hlen = igb_get_hlen(adapter, rx_desc);
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_ps_hdr_size,
PCI_DMA_FROMDEVICE);
@@ -4843,8 +4914,6 @@
data->phy_id = adapter->hw.phy.addr;
break;
case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
&data->val_out))
return -EIO;
@@ -5033,6 +5102,34 @@
}
}
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
+
+ return 0;
+}
+
static void igb_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp)
{
@@ -5136,14 +5233,6 @@
mac->autoneg = 0;
- /* Fiber NICs only allow 1000 gbps Full duplex */
- if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- dev_err(&adapter->pdev->dev,
- "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
- }
-
switch (spddplx) {
case SPEED_10 + DUPLEX_HALF:
mac->forced_speed_duplex = ADVERTISE_10_HALF;
@@ -5202,7 +5291,7 @@
if (wufc) {
igb_setup_rctl(adapter);
- igb_set_multi(netdev);
+ igb_set_rx_mode(netdev);
/* turn on all-multi mode if wake on multicast is enabled */
if (wufc & E1000_WUFC_MC) {
@@ -5452,29 +5541,17 @@
igb_get_hw_control(adapter);
}
-static void igb_set_mc_list_pools(struct igb_adapter *adapter,
- int entry_count, u16 total_rar_filters)
-{
- struct e1000_hw *hw = &adapter->hw;
- int i = adapter->vfs_allocated_count + 1;
-
- if ((i + entry_count) < total_rar_filters)
- total_rar_filters = i + entry_count;
-
- for (; i < total_rar_filters; i++)
- igb_set_rah_pool(hw, adapter->vfs_allocated_count, i);
-}
-
static int igb_set_vf_mac(struct igb_adapter *adapter,
int vf, unsigned char *mac_addr)
{
struct e1000_hw *hw = &adapter->hw;
- int rar_entry = vf + 1; /* VF MAC addresses start at entry 1 */
-
- igb_rar_set(hw, mac_addr, rar_entry);
+ /* VF MAC addresses start at end of receive addresses and moves
+ * torwards the first, as a result a collision should not be possible */
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+ igb_rar_set(hw, mac_addr, rar_entry);
igb_set_rah_pool(hw, vf, rar_entry);
return 0;
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 2bc9d63..91024a3 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -96,8 +96,6 @@
E1000_RXD_SPC_VLAN_MASK);
else
netif_receive_skb(skb);
-
- netdev->last_rx = jiffies;
}
static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
@@ -149,7 +147,6 @@
bufsz = adapter->rx_ps_hdr_size;
else
bufsz = adapter->rx_buffer_len;
- bufsz += NET_IP_ALIGN;
while (cleaned_count--) {
rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
@@ -173,7 +170,7 @@
}
if (!buffer_info->skb) {
- skb = netdev_alloc_skb(netdev, bufsz);
+ skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
if (!skb) {
adapter->alloc_rx_buff_failed++;
goto no_buffers;
@@ -286,7 +283,7 @@
if (!skb_shinfo(skb)->nr_frags) {
pci_unmap_single(pdev, buffer_info->dma,
- adapter->rx_ps_hdr_size + NET_IP_ALIGN,
+ adapter->rx_ps_hdr_size,
PCI_DMA_FROMDEVICE);
skb_put(skb, hlen);
}
@@ -343,8 +340,6 @@
igbvf_receive_skb(adapter, netdev, skb, staterr,
rx_desc->wb.upper.vlan);
- netdev->last_rx = jiffies;
-
next_desc:
rx_desc->wb.upper.status_error = 0;
@@ -2205,9 +2200,9 @@
mmiowb();
}
-static int igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
- struct net_device *netdev,
- struct igbvf_ring *tx_ring)
+static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
+ struct net_device *netdev,
+ struct igbvf_ring *tx_ring)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
unsigned int first, tx_flags = 0;
@@ -2280,11 +2275,11 @@
return NETDEV_TX_OK;
}
-static int igbvf_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t igbvf_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *tx_ring;
- int retval;
if (test_bit(__IGBVF_DOWN, &adapter->state)) {
dev_kfree_skb_any(skb);
@@ -2293,9 +2288,7 @@
tx_ring = &adapter->tx_ring[0];
- retval = igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring);
-
- return retval;
+ return igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring);
}
/**
@@ -2512,6 +2505,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
igbvf_down(adapter);
pci_disable_device(pdev);
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index e3cfefa..8ec15ab 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1515,7 +1515,7 @@
spin_unlock_irq(&ip->ioc3_lock);
- return 0;
+ return NETDEV_TX_OK;
}
static void ioc3_timeout(struct net_device *dev)
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 4301946..9f7b5d4 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -1858,7 +1858,8 @@
return 0;
}
-static int ipg_nic_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ipg_nic_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ipg_nic_private *sp = netdev_priv(dev);
void __iomem *ioaddr = sp->ioaddr;
@@ -2185,7 +2186,7 @@
return rc;
}
-static struct ethtool_ops ipg_ethtool_ops = {
+static const struct ethtool_ops ipg_ethtool_ops = {
.get_settings = ipg_get_settings,
.set_settings = ipg_set_settings,
.nway_reset = ipg_nway_reset,
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index ad17955..12c7b00 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -111,7 +111,8 @@
static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
/* SIR function */
-static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ali_ircc_sir_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self);
static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
@@ -119,7 +120,8 @@
static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
/* FIR function */
-static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ali_ircc_fir_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self);
static int ali_ircc_dma_receive(struct ali_ircc_cb *self);
@@ -1435,7 +1437,8 @@
* Transmit the frame
*
*/
-static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ali_ircc_fir_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ali_ircc_cb *self;
unsigned long flags;
@@ -1466,7 +1469,7 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
self->new_speed = speed;
}
@@ -1577,7 +1580,7 @@
dev_kfree_skb(skb);
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
- return 0;
+ return NETDEV_TX_OK;
}
@@ -1957,7 +1960,8 @@
* Transmit the frame!
*
*/
-static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ali_ircc_sir_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ali_ircc_cb *self;
unsigned long flags;
@@ -1966,10 +1970,10 @@
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
- IRDA_ASSERT(dev != NULL, return 0;);
+ IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
self = netdev_priv(dev);
- IRDA_ASSERT(self != NULL, return 0;);
+ IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
iobase = self->io.sir_base;
@@ -1991,7 +1995,7 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
self->new_speed = speed;
}
@@ -2015,7 +2019,7 @@
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index c4361d4..eb42468 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
@@ -205,9 +204,6 @@
.ndo_start_xmit = au1k_irda_hard_xmit,
.ndo_tx_timeout = au1k_tx_timeout,
.ndo_do_ioctl = au1k_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int au1k_irda_net_init(struct net_device *dev)
@@ -502,7 +498,7 @@
aup->newspeed = 0;
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
ptxd = aup->tx_ring[aup->tx_head];
@@ -555,7 +551,7 @@
dev_kfree_skb(skb);
aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 9a0346e..2d7b5c1 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -970,7 +970,7 @@
/* Netdev style code */
/* Transmit something */
-static int
+static netdev_tx_t
toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct toshoboe_cb *self;
@@ -981,7 +981,7 @@
self = netdev_priv(dev);
- IRDA_ASSERT (self != NULL, return 0; );
+ IRDA_ASSERT (self != NULL, return NETDEV_TX_OK; );
IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__
,skb->len,self->txpending,INB (OBOE_ENABLEH));
@@ -1021,7 +1021,7 @@
{
spin_unlock_irqrestore(&self->spinlock, flags);
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* True packet, go on, but */
/* do not accept anything before change speed execution */
@@ -1036,7 +1036,7 @@
toshoboe_setbaud (self);
spin_unlock_irqrestore(&self->spinlock, flags);
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
}
@@ -1143,7 +1143,7 @@
spin_unlock_irqrestore(&self->spinlock, flags);
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*interrupt handler */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 0c0831c..215adf6 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -111,7 +111,8 @@
static struct irda_class_desc *irda_usb_find_class_desc(struct usb_interface *intf);
static void irda_usb_disconnect(struct usb_interface *intf);
static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self);
-static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t irda_usb_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int irda_usb_open(struct irda_usb_cb *self);
static void irda_usb_close(struct irda_usb_cb *self);
static void speed_bulk_callback(struct urb *urb);
@@ -381,7 +382,8 @@
/*
* Send an IrDA frame to the USB dongle (for transmission)
*/
-static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t irda_usb_hard_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct irda_usb_cb *self = netdev_priv(netdev);
struct urb *urb = self->tx_urb;
@@ -534,7 +536,7 @@
}
spin_unlock_irqrestore(&self->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
drop:
/* Drop silently the skb and exit */
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index c3e4e2c..2fc30b4 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -150,7 +150,8 @@
/*
* Called from net/core when new frame is available.
*/
-static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t kingsun_hard_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct kingsun_cb *kingsun;
int wraplen;
@@ -416,7 +417,7 @@
}
static const struct net_device_ops kingsun_ops = {
- .ndo_start_xmit = kingsun_hard_xmit,
+ .ndo_start_xmit = kingsun_hard_xmit,
.ndo_open = kingsun_net_open,
.ndo_stop = kingsun_net_close,
.ndo_do_ioctl = kingsun_net_ioctl,
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
index d73b8b6..f4d13fc 100644
--- a/drivers/net/irda/ks959-sir.c
+++ b/drivers/net/irda/ks959-sir.c
@@ -385,7 +385,8 @@
/*
* Called from net/core when new frame is available.
*/
-static int ks959_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ks959_hard_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct ks959_cb *kingsun;
unsigned int wraplen;
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
index 1ef45ec..5f9d733 100644
--- a/drivers/net/irda/ksdazzle-sir.c
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -298,7 +298,8 @@
/*
* Called from net/core when new frame is available.
*/
-static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ksdazzle_hard_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct ksdazzle_cb *kingsun;
unsigned int wraplen;
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index f4df100..b3d30bc 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -817,7 +817,8 @@
}
/* Transmit callback funtion. */
-static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
{
unsigned long flags;
struct mcs_cb *mcs;
diff --git a/drivers/net/irda/mcs7780.h b/drivers/net/irda/mcs7780.h
index 6bdc621..b10689b 100644
--- a/drivers/net/irda/mcs7780.h
+++ b/drivers/net/irda/mcs7780.h
@@ -156,7 +156,8 @@
static void mcs_receive_irq(struct urb *urb);
static void mcs_send_irq(struct urb *urb);
-static int mcs_hard_xmit(struct sk_buff *skb, struct net_device *netdev);
+static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
+ struct net_device *netdev);
static int mcs_probe(struct usb_interface *intf,
const struct usb_device_id *id);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 45fd9c1..2413295 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -173,8 +173,10 @@
static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self);
static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
-static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
-static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t nsc_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev);
+static netdev_tx_t nsc_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev);
static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
@@ -1355,7 +1357,8 @@
* Transmit the frame!
*
*/
-static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t nsc_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev)
{
struct nsc_ircc_cb *self;
unsigned long flags;
@@ -1365,7 +1368,7 @@
self = netdev_priv(dev);
- IRDA_ASSERT(self != NULL, return 0;);
+ IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
iobase = self->io.fir_base;
@@ -1397,7 +1400,7 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
self->new_speed = speed;
}
@@ -1424,10 +1427,11 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
-static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t nsc_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev)
{
struct nsc_ircc_cb *self;
unsigned long flags;
@@ -1467,7 +1471,7 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else {
/* Change speed after current frame */
self->new_speed = speed;
@@ -1554,7 +1558,7 @@
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 3376a4f..1445e58 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -504,7 +504,7 @@
pxa_irda_set_speed(si, speed);
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue(dev);
@@ -539,7 +539,7 @@
dev_kfree_skb(skb);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
@@ -803,9 +803,6 @@
.ndo_stop = pxa_irda_stop,
.ndo_start_xmit = pxa_irda_hard_xmit,
.ndo_do_ioctl = pxa_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int pxa_irda_probe(struct platform_device *pdev)
@@ -830,6 +827,7 @@
if (!dev)
goto err_mem_3;
+ SET_NETDEV_DEV(dev, &pdev->dev);
si = netdev_priv(dev);
si->dev = &pdev->dev;
si->pdata = pdev->dev.platform_data;
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 2aeb2e6..38bf7cf 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
@@ -667,7 +666,7 @@
sa1100_irda_set_speed(si, speed);
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (!IS_FIR(si)) {
@@ -715,7 +714,7 @@
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static int
@@ -881,9 +880,6 @@
.ndo_stop = sa1100_irda_stop,
.ndo_start_xmit = sa1100_irda_hard_xmit,
.ndo_do_ioctl = sa1100_irda_ioctl,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
};
static int sa1100_irda_probe(struct platform_device *pdev)
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index fd0796c..4b2a1a9 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -582,7 +582,8 @@
/* callbacks from network layer */
-static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t sirdev_hard_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
{
struct sir_dev *dev = netdev_priv(ndev);
unsigned long flags;
@@ -590,7 +591,7 @@
int err;
s32 speed;
- IRDA_ASSERT(dev != NULL, return 0;);
+ IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
netif_stop_queue(ndev);
@@ -621,7 +622,7 @@
*/
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
dev->new_speed = speed;
}
@@ -668,7 +669,7 @@
}
spin_unlock_irqrestore(&dev->tx_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* called from network layer with rtnl hold */
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index d0797ad..1e8dd8c 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -194,8 +194,10 @@
static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
-static int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
-static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev);
+static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev);
static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
@@ -486,7 +488,8 @@
return ret;
}
-static int smsc_ircc_net_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t smsc_ircc_net_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct smsc_ircc_cb *self = netdev_priv(dev);
@@ -878,7 +881,8 @@
* waits until the next transmit interrupt, and continues until the
* frame is transmitted.
*/
-static int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev)
{
struct smsc_ircc_cb *self;
unsigned long flags;
@@ -886,10 +890,10 @@
IRDA_DEBUG(1, "%s\n", __func__);
- IRDA_ASSERT(dev != NULL, return 0;);
+ IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
self = netdev_priv(dev);
- IRDA_ASSERT(self != NULL, return 0;);
+ IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
netif_stop_queue(dev);
@@ -914,7 +918,7 @@
smsc_ircc_change_speed(self, speed);
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
self->new_speed = speed;
}
@@ -935,7 +939,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -1183,16 +1187,17 @@
* Transmit the frame!
*
*/
-static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev)
{
struct smsc_ircc_cb *self;
unsigned long flags;
s32 speed;
int mtt;
- IRDA_ASSERT(dev != NULL, return 0;);
+ IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
self = netdev_priv(dev);
- IRDA_ASSERT(self != NULL, return 0;);
+ IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
netif_stop_queue(dev);
@@ -1210,7 +1215,7 @@
smsc_ircc_change_speed(self, speed);
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
self->new_speed = speed;
@@ -1242,7 +1247,7 @@
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 8e5e45c..528767d 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -560,7 +560,8 @@
/*
* Called from net/core when new frame is available.
*/
-static int stir_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t stir_hard_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct stir_cb *stir = netdev_priv(netdev);
@@ -578,7 +579,7 @@
dev_kfree_skb(skb);
}
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 8647985..a5ca71c 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -87,10 +87,10 @@
static int via_ircc_dma_receive(struct via_ircc_cb *self);
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
int iobase);
-static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
- struct net_device *dev);
-static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t via_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev);
+static netdev_tx_t via_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev);
static void via_hw_init(struct via_ircc_cb *self);
static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 baud);
static irqreturn_t via_ircc_interrupt(int irq, void *dev_id);
@@ -823,8 +823,8 @@
* Transmit the frame!
*
*/
-static int via_ircc_hard_xmit_sir(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t via_ircc_hard_xmit_sir(struct sk_buff *skb,
+ struct net_device *dev)
{
struct via_ircc_cb *self;
unsigned long flags;
@@ -832,7 +832,7 @@
__u32 speed;
self = netdev_priv(dev);
- IRDA_ASSERT(self != NULL, return 0;);
+ IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
iobase = self->io.fir_base;
netif_stop_queue(dev);
@@ -844,7 +844,7 @@
via_ircc_change_speed(self, speed);
dev->trans_start = jiffies;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
self->new_speed = speed;
}
@@ -892,11 +892,11 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&self->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
-static int via_ircc_hard_xmit_fir(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t via_ircc_hard_xmit_fir(struct sk_buff *skb,
+ struct net_device *dev)
{
struct via_ircc_cb *self;
u16 iobase;
@@ -907,7 +907,7 @@
iobase = self->io.fir_base;
if (self->st_fifo.len)
- return 0;
+ return NETDEV_TX_OK;
if (self->chip_id == 0x3076)
iodelay(1500);
else
@@ -919,7 +919,7 @@
via_ircc_change_speed(self, speed);
dev->trans_start = jiffies;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
self->new_speed = speed;
}
@@ -940,7 +940,7 @@
dev->trans_start = jiffies;
dev_kfree_skb(skb);
spin_unlock_irqrestore(&self->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index ac0e4b6..7cfb8b6 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -854,7 +854,8 @@
return ret;
}
-static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t vlsi_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
{
vlsi_irda_dev_t *idev = netdev_priv(ndev);
struct vlsi_ring *r = idev->tx_ring;
@@ -915,7 +916,7 @@
*/
spin_unlock_irqrestore(&idev->lock, flags);
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* sanity checks - simply drop the packet */
@@ -1044,7 +1045,7 @@
}
spin_unlock_irqrestore(&idev->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
drop_unlock:
spin_unlock_irqrestore(&idev->lock, flags);
@@ -1058,7 +1059,7 @@
* packet for later retry of transmission - which isn't exactly
* what we want after we've just called dev_kfree_skb_any ;-)
*/
- return 0;
+ return NETDEV_TX_OK;
}
static void vlsi_tx_interrupt(struct net_device *ndev)
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index fe4f2b2..551810f 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -93,7 +93,8 @@
static int w83977af_probe(int iobase, int irq, int dma);
static int w83977af_dma_receive(struct w83977af_ir *self);
static int w83977af_dma_receive_complete(struct w83977af_ir *self);
-static int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
static void w83977af_dma_write(struct w83977af_ir *self, int iobase);
static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed);
@@ -490,7 +491,8 @@
* Sets up a DMA transfer to send the current frame.
*
*/
-static int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct w83977af_ir *self;
__s32 speed;
@@ -516,7 +518,7 @@
w83977af_change_speed(self, speed);
dev->trans_start = jiffies;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else
self->new_speed = speed;
}
@@ -576,7 +578,7 @@
/* Restore set register */
outb(set, iobase+SSR);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index d12377b..9706e64 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -468,7 +468,7 @@
dev_kfree_skb (skb);
#endif
- return 0;
+ return NETDEV_TX_OK;
}
#if TX_RING
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index e44215c..e36e951 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1205,7 +1205,7 @@
if ( ! ((1 << rlp) & port->lpar_map) ) {
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
lpmask = 1 << rlp;
@@ -1217,7 +1217,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* You must hold the connection's lock when you call this function. */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 9c897cf..8aa44dc 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -81,7 +81,8 @@
static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter);
static void ixgb_set_multi(struct net_device *netdev);
static void ixgb_watchdog(unsigned long data);
-static int ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
static struct net_device_stats *ixgb_get_stats(struct net_device *netdev);
static int ixgb_change_mtu(struct net_device *netdev, int new_mtu);
static int ixgb_set_mac(struct net_device *netdev, void *p);
@@ -1442,7 +1443,7 @@
MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \
+ 1 /* one more needed for sentinel TSO workaround */
-static int
+static netdev_tx_t
ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
@@ -1459,7 +1460,7 @@
if (skb->len <= 0) {
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring,
@@ -2227,6 +2228,11 @@
struct net_device *netdev = pci_get_drvdata(pdev);
struct ixgb_adapter *adapter = netdev_priv(netdev);
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
ixgb_down(adapter, true);
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 2c4dc82..dd688d4 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -233,10 +233,6 @@
#define IXGBE_TX_CTXTDESC_ADV(R, i) \
(&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i]))
-#define IXGBE_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
-#define IXGBE_TX_DESC(R, i) IXGBE_GET_DESC(R, i, ixgbe_legacy_tx_desc)
-#define IXGBE_RX_DESC(R, i) IXGBE_GET_DESC(R, i, ixgbe_legacy_rx_desc)
-
#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128
#ifdef IXGBE_FCOE
/* Use 3K as the baby jumbo frame size for FCoE */
@@ -428,55 +424,20 @@
extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
struct ixgbe_atr_input *input,
u8 queue);
-extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
- struct ixgbe_atr_input *input,
- u16 soft_id,
- u8 queue);
-extern u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *input, u32 key);
extern s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input,
u16 vlan_id);
extern s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input,
u32 src_addr);
extern s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input,
u32 dst_addr);
-extern s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
- u32 src_addr_1, u32 src_addr_2,
- u32 src_addr_3, u32 src_addr_4);
-extern s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
- u32 dst_addr_1, u32 dst_addr_2,
- u32 dst_addr_3, u32 dst_addr_4);
extern s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input,
u16 src_port);
extern s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input,
u16 dst_port);
extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
u16 flex_byte);
-extern s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input,
- u8 vm_pool);
extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
u8 l4type);
-extern s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input,
- u16 *vlan_id);
-extern s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
- u32 *src_addr);
-extern s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
- u32 *dst_addr);
-extern s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
- u32 *src_addr_1, u32 *src_addr_2,
- u32 *src_addr_3, u32 *src_addr_4);
-extern s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input,
- u32 *dst_addr_1, u32 *dst_addr_2,
- u32 *dst_addr_3, u32 *dst_addr_4);
-extern s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
- u16 *src_port);
-extern s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
- u16 *dst_port);
-extern s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
- u16 *flex_byte);
-extern s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input,
- u8 *vm_pool);
-extern s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
- u8 *l4type);
#ifdef IXGBE_FCOE
extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
extern int ixgbe_fso(struct ixgbe_adapter *adapter,
@@ -489,6 +450,12 @@
extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
struct scatterlist *sgl, unsigned int sgc);
extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
+extern int ixgbe_fcoe_enable(struct net_device *netdev);
+extern int ixgbe_fcoe_disable(struct net_device *netdev);
+#ifdef CONFIG_IXGBE_DCB
+extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
+extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
+#endif /* CONFIG_IXGBE_DCB */
#endif /* IXGBE_FCOE */
#endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 522c03b..cb7f0c3 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -41,8 +41,7 @@
static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
bool *autoneg);
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete);
@@ -59,7 +58,7 @@
* increase the value to either 10ms to 250ms for capability version 1 config,
* or 16ms to 55ms for version 2.
**/
-void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
{
struct ixgbe_adapter *adapter = hw->back;
u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
@@ -143,7 +142,7 @@
* not known. Perform the SFP init if necessary.
*
**/
-s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
@@ -156,8 +155,6 @@
/* Overwrite the link function pointers if copper PHY */
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
- mac->ops.setup_link_speed =
- &ixgbe_setup_copper_link_speed_82598;
mac->ops.get_link_capabilities =
&ixgbe_get_copper_link_capabilities_82598;
}
@@ -204,7 +201,7 @@
* Starts the hardware using the generic start_hw function.
* Then set pcie completion timeout
**/
-s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
@@ -334,6 +331,7 @@
media_type = ixgbe_media_type_fiber;
break;
case IXGBE_DEV_ID_82598AT:
+ case IXGBE_DEV_ID_82598AT2:
media_type = ixgbe_media_type_copper;
break;
default:
@@ -464,13 +462,14 @@
}
/**
- * ixgbe_setup_mac_link_82598 - Configures MAC link settings
+ * ixgbe_start_mac_link_82598 - Configures MAC link settings
* @hw: pointer to hardware structure
*
* Configures link settings based on values in the ixgbe_hw struct.
* Restarts the link. Performs autonegotiation if needed.
**/
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
{
u32 autoc_reg;
u32 links_reg;
@@ -483,7 +482,7 @@
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
/* Only poll for autoneg to complete if specified to do so */
- if (hw->phy.autoneg_wait_to_complete) {
+ if (autoneg_wait_to_complete) {
if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
IXGBE_AUTOC_LMS_KX4_AN ||
(autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
@@ -599,7 +598,7 @@
/**
- * ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
+ * ixgbe_setup_mac_link_82598 - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if auto-negotiation enabled
@@ -607,7 +606,7 @@
*
* Set the link speed in the AUTOC register and restarts link.
**/
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed, bool autoneg,
bool autoneg_wait_to_complete)
{
@@ -637,14 +636,12 @@
}
if (status == 0) {
- hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
-
/*
* Setup and restart the link based on the new values in
* ixgbe_hw This will write the AUTOC register based on the new
* stored values
*/
- status = ixgbe_setup_mac_link_82598(hw);
+ status = ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
}
return status;
@@ -652,29 +649,7 @@
/**
- * ixgbe_setup_copper_link_82598 - Setup copper link settings
- * @hw: pointer to hardware structure
- *
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link. Performs autonegotiation if needed. Restart
- * phy and wait for autonegotiate to finish. Then synchronize the
- * MAC and PHY.
- **/
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
-{
- s32 status;
-
- /* Restart autonegotiation on PHY */
- status = hw->phy.ops.setup_link(hw);
-
- /* Set up MAC */
- ixgbe_setup_mac_link_82598(hw);
-
- return status;
-}
-
-/**
- * ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field
+ * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if autonegotiation enabled
@@ -682,7 +657,7 @@
*
* Sets the link speed in the AUTOC register in the MAC and restarts link.
**/
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete)
@@ -694,7 +669,7 @@
autoneg_wait_to_complete);
/* Set up MAC */
- ixgbe_setup_mac_link_82598(hw);
+ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
return status;
}
@@ -1162,7 +1137,6 @@
.read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
.write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
.setup_link = &ixgbe_setup_mac_link_82598,
- .setup_link_speed = &ixgbe_setup_mac_link_speed_82598,
.check_link = &ixgbe_check_mac_link_82598,
.get_link_capabilities = &ixgbe_get_link_capabilities_82598,
.led_on = &ixgbe_led_on_generic,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 1984cab..61af47e 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -38,62 +38,37 @@
#define IXGBE_82599_MC_TBL_SIZE 128
#define IXGBE_82599_VFT_TBL_SIZE 128
-s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg);
-enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw);
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw);
-s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw);
-s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *link_up, bool link_up_wait_to_complete);
-s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
bool *autoneg);
-static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw);
-s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
-s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
-s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan,
- u32 vind, bool vlan_on);
-s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
-s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
-s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
-s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
-s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
-s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw);
-u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
-void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
- mac->ops.setup_link =
- &ixgbe_setup_mac_link_multispeed_fiber;
- mac->ops.setup_link_speed =
- &ixgbe_setup_mac_link_speed_multispeed_fiber;
+ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
} else {
- mac->ops.setup_link =
- &ixgbe_setup_mac_link_82599;
- mac->ops.setup_link_speed =
- &ixgbe_setup_mac_link_speed_82599;
+ mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
}
}
-s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
u16 list_offset, data_offset, data_value;
@@ -143,7 +118,7 @@
* Read PCIe configuration space, and get the MSI-X vector count from
* the capabilities table.
**/
-u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
+static u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
{
struct ixgbe_adapter *adapter = hw->back;
u16 msix_count;
@@ -182,7 +157,7 @@
* not known. Perform the SFP init if necessary.
*
**/
-s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
@@ -197,8 +172,6 @@
/* If copper media, overwrite with copper function pointers */
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
- mac->ops.setup_link_speed =
- &ixgbe_setup_copper_link_speed_82599;
mac->ops.get_link_capabilities =
&ixgbe_get_copper_link_capabilities_82599;
}
@@ -225,9 +198,9 @@
*
* Determines the link capabilities by reading the AUTOC register.
**/
-s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *negotiation)
+static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *negotiation)
{
s32 status = 0;
u32 autoc = 0;
@@ -344,7 +317,7 @@
*
* Returns the media type (fiber, copper, backplane)
**/
-enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
{
enum ixgbe_media_type media_type;
@@ -373,13 +346,15 @@
}
/**
- * ixgbe_setup_mac_link_82599 - Setup MAC link settings
+ * ixgbe_start_mac_link_82599 - Setup MAC link settings
* @hw: pointer to hardware structure
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Configures link settings based on values in the ixgbe_hw struct.
* Restarts the link. Performs autonegotiation if needed.
**/
-s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw)
+s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
{
u32 autoc_reg;
u32 links_reg;
@@ -392,7 +367,7 @@
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
/* Only poll for autoneg to complete if specified to do so */
- if (hw->phy.autoneg_wait_to_complete) {
+ if (autoneg_wait_to_complete) {
if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
IXGBE_AUTOC_LMS_KX4_KX_KR ||
(autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
@@ -420,25 +395,7 @@
}
/**
- * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings
- * @hw: pointer to hardware structure
- *
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link for multi-speed fiber at 1G speed, if link
- * fails at 10G.
- * Performs autonegotiation if needed.
- **/
-s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG;
- status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, link_speed,
- true, true);
- return status;
-}
-
-/**
- * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed
+ * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if autonegotiation enabled
@@ -446,10 +403,10 @@
*
* Set the link speed in the AUTOC register and restarts link.
**/
-s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
+s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
{
s32 status = 0;
ixgbe_link_speed phy_link_speed;
@@ -464,15 +421,6 @@
hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
speed &= phy_link_speed;
- /* Set autoneg_advertised value based on input link speed */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
/*
* When the driver changes the link speeds that it can support,
* it sets autotry_restart to true to indicate that we need to
@@ -504,12 +452,12 @@
/* Allow module to change analog characteristics (1G->10G) */
msleep(40);
- status = ixgbe_setup_mac_link_speed_82599(hw,
- IXGBE_LINK_SPEED_10GB_FULL,
- autoneg,
- autoneg_wait_to_complete);
+ status = ixgbe_setup_mac_link_82599(hw,
+ IXGBE_LINK_SPEED_10GB_FULL,
+ autoneg,
+ autoneg_wait_to_complete);
if (status != 0)
- goto out;
+ return status;
/* Flap the tx laser if it has not already been done */
if (hw->mac.autotry_restart) {
@@ -558,12 +506,12 @@
/* Allow module to change analog characteristics (10G->1G) */
msleep(40);
- status = ixgbe_setup_mac_link_speed_82599(hw,
+ status = ixgbe_setup_mac_link_82599(hw,
IXGBE_LINK_SPEED_1GB_FULL,
autoneg,
autoneg_wait_to_complete);
if (status != 0)
- goto out;
+ return status;
/* Flap the tx laser if it has not already been done */
if (hw->mac.autotry_restart) {
@@ -595,12 +543,21 @@
* single highest speed that the user requested.
*/
if (speedcnt > 1)
- status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw,
- highest_link_speed,
- autoneg,
- autoneg_wait_to_complete);
+ status = ixgbe_setup_mac_link_multispeed_fiber(hw,
+ highest_link_speed,
+ autoneg,
+ autoneg_wait_to_complete);
out:
+ /* Set autoneg_advertised value based on input link speed */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
return status;
}
@@ -613,8 +570,10 @@
*
* Reads the links register to determine if link is up and the current speed
**/
-s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up, bool link_up_wait_to_complete)
+static s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up,
+ bool link_up_wait_to_complete)
{
u32 links_reg;
u32 i;
@@ -657,7 +616,7 @@
}
/**
- * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed
+ * ixgbe_setup_mac_link_82599 - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if autonegotiation enabled
@@ -665,9 +624,9 @@
*
* Set the link speed in the AUTOC register and restarts link.
**/
-s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
+s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
{
s32 status = 0;
u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
@@ -767,26 +726,7 @@
}
/**
- * ixgbe_setup_copper_link_82599 - Setup copper link settings
- * @hw: pointer to hardware structure
- *
- * Restarts the link on PHY and then MAC. Performs autonegotiation if needed.
- **/
-static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw)
-{
- s32 status;
-
- /* Restart autonegotiation on PHY */
- status = hw->phy.ops.setup_link(hw);
-
- /* Set up MAC */
- ixgbe_setup_mac_link_82599(hw);
-
- return status;
-}
-
-/**
- * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field
+ * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if autonegotiation enabled
@@ -794,10 +734,10 @@
*
* Restarts link on PHY and MAC based on settings passed in.
**/
-static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
{
s32 status;
@@ -805,7 +745,7 @@
status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
autoneg_wait_to_complete);
/* Set up MAC */
- ixgbe_setup_mac_link_82599(hw);
+ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
return status;
}
@@ -818,7 +758,7 @@
* and clears all interrupts, perform a PHY reset, and perform a link (MAC)
* reset.
**/
-s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
{
s32 status = 0;
u32 ctrl, ctrl_ext;
@@ -943,7 +883,7 @@
* @rar: receive address register index to disassociate
* @vmdq: VMDq pool index to remove from the rar
**/
-s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+static s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
u32 mpsar_lo, mpsar_hi;
u32 rar_entries = hw->mac.num_rar_entries;
@@ -989,7 +929,7 @@
* @rar: receive address register index to associate with a VMDq index
* @vmdq: VMDq pool index
**/
-s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+static s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
{
u32 mpsar;
u32 rar_entries = hw->mac.num_rar_entries;
@@ -1019,8 +959,8 @@
*
* Turn on/off specified VLAN in the VLAN filter table.
**/
-s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
+static s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
{
u32 regindex;
u32 bitindex;
@@ -1133,7 +1073,7 @@
*
* Clears the VLAN filer table, and the VMDq index associated with the filter
**/
-s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw)
{
u32 offset;
@@ -1153,7 +1093,7 @@
* ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array
* @hw: pointer to hardware structure
**/
-s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
{
int i;
hw_dbg(hw, " Clearing UTA\n");
@@ -1430,7 +1370,8 @@
* @stream: input bitstream to compute the hash on
* @key: 32-bit hash key
**/
-u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input, u32 key)
+static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
+ u32 key)
{
/*
* The algorithm is as follows:
@@ -1602,8 +1543,8 @@
* @src_addr_4: the fourth 4 bytes of the IP address to load
**/
s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input,
- u32 src_addr_1, u32 src_addr_2,
- u32 src_addr_3, u32 src_addr_4)
+ u32 src_addr_1, u32 src_addr_2,
+ u32 src_addr_3, u32 src_addr_4)
{
input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET] = src_addr_4 & 0xff;
input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] =
@@ -1645,8 +1586,8 @@
* @dst_addr_4: the fourth 4 bytes of the IP address to load
**/
s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input,
- u32 dst_addr_1, u32 dst_addr_2,
- u32 dst_addr_3, u32 dst_addr_4)
+ u32 dst_addr_1, u32 dst_addr_2,
+ u32 dst_addr_3, u32 dst_addr_4)
{
input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET] = dst_addr_4 & 0xff;
input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] =
@@ -1723,7 +1664,8 @@
* @input: input stream to modify
* @vm_pool: the Virtual Machine pool to load
**/
-s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input, u8 vm_pool)
+s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input,
+ u8 vm_pool)
{
input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET] = vm_pool;
@@ -1747,7 +1689,8 @@
* @input: input stream to search
* @vlan: the VLAN id to load
**/
-s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
+static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input,
+ u16 *vlan)
{
*vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
*vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
@@ -1760,7 +1703,8 @@
* @input: input stream to search
* @src_addr: the IP address to load
**/
-s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input, u32 *src_addr)
+static s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
+ u32 *src_addr)
{
*src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET];
*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8;
@@ -1775,7 +1719,8 @@
* @input: input stream to search
* @dst_addr: the IP address to load
**/
-s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 *dst_addr)
+static s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
+ u32 *dst_addr)
{
*dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET];
*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8;
@@ -1793,9 +1738,9 @@
* @src_addr_3: the third 4 bytes of the IP address to load
* @src_addr_4: the fourth 4 bytes of the IP address to load
**/
-s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
- u32 *src_addr_1, u32 *src_addr_2,
- u32 *src_addr_3, u32 *src_addr_4)
+static s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
+ u32 *src_addr_1, u32 *src_addr_2,
+ u32 *src_addr_3, u32 *src_addr_4)
{
*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12];
*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8;
@@ -1829,8 +1774,8 @@
* @dst_addr_4: the fourth 4 bytes of the IP address to load
**/
s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input,
- u32 *dst_addr_1, u32 *dst_addr_2,
- u32 *dst_addr_3, u32 *dst_addr_4)
+ u32 *dst_addr_1, u32 *dst_addr_2,
+ u32 *dst_addr_3, u32 *dst_addr_4)
{
*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12];
*dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] << 8;
@@ -1865,7 +1810,8 @@
* endianness when retrieving the data. This can be confusing since the
* internal hash engine expects it to be big-endian.
**/
-s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input, u16 *src_port)
+static s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
+ u16 *src_port)
{
*src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8;
*src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1];
@@ -1883,7 +1829,8 @@
* endianness when retrieving the data. This can be confusing since the
* internal hash engine expects it to be big-endian.
**/
-s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input, u16 *dst_port)
+static s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
+ u16 *dst_port)
{
*dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8;
*dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1];
@@ -1896,7 +1843,8 @@
* @input: input stream to modify
* @flex_bytes: the flexible bytes to load
**/
-s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input, u16 *flex_byte)
+static s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
+ u16 *flex_byte)
{
*flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET];
*flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8;
@@ -1909,7 +1857,8 @@
* @input: input stream to modify
* @vm_pool: the Virtual Machine pool to load
**/
-s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input, u8 *vm_pool)
+s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input,
+ u8 *vm_pool)
{
*vm_pool = input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET];
@@ -1921,7 +1870,8 @@
* @input: input stream to modify
* @l4type: the layer 4 type value to load
**/
-s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input, u8 *l4type)
+static s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
+ u8 *l4type)
{
*l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET];
@@ -2002,9 +1952,9 @@
* hardware writes must be protected from one another.
**/
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
- struct ixgbe_atr_input *input,
- u16 soft_id,
- u8 queue)
+ struct ixgbe_atr_input *input,
+ u16 soft_id,
+ u8 queue)
{
u32 fdircmd = 0;
u32 fdirhash;
@@ -2097,7 +2047,7 @@
*
* Performs read operation to Omer analog register specified.
**/
-s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
{
u32 core_ctl;
@@ -2119,7 +2069,7 @@
*
* Performs write operation to Omer analog register specified.
**/
-s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
{
u32 core_ctl;
@@ -2139,7 +2089,7 @@
* Then performs device-specific:
* Clears the rate limiter registers.
**/
-s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
{
u32 q_num;
s32 ret_val;
@@ -2168,7 +2118,7 @@
*
* Determines the physical layer module found on the current adapter.
**/
-s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
status = ixgbe_identify_phy_generic(hw);
@@ -2183,7 +2133,7 @@
*
* Determines physical layer capabilities of the current configuration.
**/
-u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
+static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
{
u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
@@ -2290,7 +2240,7 @@
*
* Enables the Rx DMA unit for 82599
**/
-s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
{
#define IXGBE_MAX_SECRX_POLL 30
int i;
@@ -2335,7 +2285,7 @@
* This function will read the EEPROM location for the device capabilities,
* and return the word through device_caps.
**/
-s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
+static s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
{
hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
@@ -2351,8 +2301,8 @@
* pointer, and returns the value at that location. This is used in both
* get and set mac_addr routines.
**/
-s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
- u16 *san_mac_offset)
+static s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
+ u16 *san_mac_offset)
{
/*
* First read the EEPROM pointer to see if the MAC addresses are
@@ -2373,7 +2323,7 @@
* set_lan_id() is called by identify_sfp(), but this cannot be relied
* upon for non-SFP connections, so we must call it here.
**/
-s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr)
+static s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr)
{
u16 san_mac_data, san_mac_offset;
u8 i;
@@ -2476,7 +2426,6 @@
.read_analog_reg8 = &ixgbe_read_analog_reg8_82599,
.write_analog_reg8 = &ixgbe_write_analog_reg8_82599,
.setup_link = &ixgbe_setup_mac_link_82599,
- .setup_link_speed = &ixgbe_setup_mac_link_speed_82599,
.check_link = &ixgbe_check_mac_link_82599,
.get_link_capabilities = &ixgbe_get_link_capabilities_82599,
.led_on = &ixgbe_led_on_generic,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 96a1859..6621e17 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -53,6 +53,7 @@
static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
+static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
/**
* ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
@@ -1815,7 +1816,7 @@
*
* Called at init time to set up flow control.
**/
-s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
+static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
{
s32 ret_val = 0;
u32 reg;
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 0d34d4d..27f3214 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -64,7 +64,6 @@
s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index 589f62c..ec8a252 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -145,8 +145,12 @@
u32 credit_max = 0;
u8 i = 0;
- /* Disable the arbiter before changing parameters */
- IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, IXGBE_RTRPCS_ARBDIS);
+ /*
+ * Disable the arbiter before changing parameters
+ * (always enable recycle mode; WSP)
+ */
+ reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
/* Map all traffic classes to their UP, 1 to 1 */
reg = 0;
@@ -194,9 +198,6 @@
u32 reg, max_credits;
u8 i;
- /* Disable the arbiter before changing parameters */
- IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, IXGBE_RTTDCS_ARBDIS);
-
/* Clear the per-Tx queue credits; we use per-TC instead */
for (i = 0; i < 128; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
@@ -244,8 +245,14 @@
u32 reg;
u8 i;
- /* Disable the arbiter before changing parameters */
- IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, IXGBE_RTTPCS_ARBDIS);
+ /*
+ * Disable the arbiter before changing parameters
+ * (always enable recycle mode; SP; arb delay)
+ */
+ reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+ (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
+ IXGBE_RTTPCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
/* Map all traffic classes to their UP, 1 to 1 */
reg = 0;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 1c72657..a6bc1ef 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -36,6 +36,7 @@
#define BIT_PFC 0x02
#define BIT_PG_RX 0x04
#define BIT_PG_TX 0x08
+#define BIT_APP_UPCHG 0x10
#define BIT_RESETLINK 0x40
#define BIT_LINKSPEED 0x80
@@ -139,18 +140,6 @@
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
}
adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
-#ifdef IXGBE_FCOE
- /* Turn on FCoE offload */
- if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) &&
- (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) {
- adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices =
- IXGBE_FCRETA_SIZE;
- netdev->features |= NETIF_F_FCOE_CRC;
- netdev->features |= NETIF_F_FSO;
- netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- }
-#endif /* IXGBE_FCOE */
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
@@ -169,17 +158,6 @@
if (adapter->hw.mac.type == ixgbe_mac_82599EB)
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
-#ifdef IXGBE_FCOE
- /* Turn off FCoE offload */
- if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE |
- IXGBE_FLAG_FCOE_ENABLED)) {
- adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices = 0;
- netdev->features &= ~NETIF_F_FCOE_CRC;
- netdev->features &= ~NETIF_F_FSO;
- netdev->fcoe_ddp_xid = 0;
- }
-#endif /* IXGBE_FCOE */
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
@@ -371,8 +349,14 @@
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
msleep(1);
- if (netif_running(netdev))
- ixgbe_down(adapter);
+ if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_stop(netdev);
+ ixgbe_clear_interrupt_scheme(adapter);
+ } else {
+ if (netif_running(netdev))
+ ixgbe_down(adapter);
+ }
}
ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
@@ -396,8 +380,14 @@
}
if (adapter->dcb_set_bitmap & BIT_RESETLINK) {
- if (netif_running(netdev))
- ixgbe_up(adapter);
+ if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
+ ixgbe_init_interrupt_scheme(adapter);
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_open(netdev);
+ } else {
+ if (netif_running(netdev))
+ ixgbe_up(adapter);
+ }
ret = DCB_HW_CHG_RST;
} else if (adapter->dcb_set_bitmap & BIT_PFC) {
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
@@ -503,6 +493,76 @@
return;
}
+/**
+ * ixgbe_dcbnl_getapp - retrieve the DCBX application user priority
+ * @netdev : the corresponding netdev
+ * @idtype : identifies the id as ether type or TCP/UDP port number
+ * @id: id is either ether type or TCP/UDP port number
+ *
+ * Returns : on success, returns a non-zero 802.1p user priority bitmap
+ * otherwise returns 0 as the invalid user priority bitmap to indicate an
+ * error.
+ */
+static u8 ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id)
+{
+ u8 rval = 0;
+
+ switch (idtype) {
+ case DCB_APP_IDTYPE_ETHTYPE:
+#ifdef IXGBE_FCOE
+ if (id == ETH_P_FCOE)
+ rval = ixgbe_fcoe_getapp(netdev_priv(netdev));
+#endif
+ break;
+ case DCB_APP_IDTYPE_PORTNUM:
+ break;
+ default:
+ break;
+ }
+ return rval;
+}
+
+/**
+ * ixgbe_dcbnl_setapp - set the DCBX application user priority
+ * @netdev : the corresponding netdev
+ * @idtype : identifies the id as ether type or TCP/UDP port number
+ * @id: id is either ether type or TCP/UDP port number
+ * @up: the 802.1p user priority bitmap
+ *
+ * Returns : 0 on success or 1 on error
+ */
+static u8 ixgbe_dcbnl_setapp(struct net_device *netdev,
+ u8 idtype, u16 id, u8 up)
+{
+ u8 rval = 1;
+
+ switch (idtype) {
+ case DCB_APP_IDTYPE_ETHTYPE:
+#ifdef IXGBE_FCOE
+ if (id == ETH_P_FCOE) {
+ u8 tc;
+ struct ixgbe_adapter *adapter;
+
+ adapter = netdev_priv(netdev);
+ tc = adapter->fcoe.tc;
+ rval = ixgbe_fcoe_setapp(adapter, up);
+ if ((!rval) && (tc != adapter->fcoe.tc) &&
+ (adapter->flags & IXGBE_FLAG_DCB_ENABLED) &&
+ (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) {
+ adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
+ adapter->dcb_set_bitmap |= BIT_RESETLINK;
+ }
+ }
+#endif
+ break;
+ case DCB_APP_IDTYPE_PORTNUM:
+ break;
+ default:
+ break;
+ }
+ return rval;
+}
+
struct dcbnl_rtnl_ops dcbnl_ops = {
.getstate = ixgbe_dcbnl_get_state,
.setstate = ixgbe_dcbnl_set_state,
@@ -523,5 +583,7 @@
.setnumtcs = ixgbe_dcbnl_setnumtcs,
.getpfcstate = ixgbe_dcbnl_getpfcstate,
.setpfcstate = ixgbe_dcbnl_setpfcstate,
+ .getapp = ixgbe_dcbnl_getapp,
+ .setapp = ixgbe_dcbnl_setapp,
};
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index dff8dfa..026e94a 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -169,23 +169,20 @@
}
} else if (hw->phy.media_type == ixgbe_media_type_backplane) {
/* Set as FIBRE until SERDES defined in kernel */
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82598:
- ecmd->supported |= (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE);
- ecmd->advertising = (ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
- break;
- case IXGBE_DEV_ID_82598_BX:
+ if (hw->device_id == IXGBE_DEV_ID_82598_BX) {
ecmd->supported = (SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE);
ecmd->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
- break;
+ } else {
+ ecmd->supported |= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
}
} else {
ecmd->supported |= SUPPORTED_FIBRE;
@@ -236,11 +233,11 @@
return err;
/* this sets the link speed and restarts auto-neg */
hw->mac.autotry_restart = true;
- err = hw->mac.ops.setup_link_speed(hw, advertised, true, true);
+ err = hw->mac.ops.setup_link(hw, advertised, true, true);
if (err) {
DPRINTK(PROBE, INFO,
"setup link failed with code %d\n", err);
- hw->mac.ops.setup_link_speed(hw, old, true, true);
+ hw->mac.ops.setup_link(hw, old, true, true);
}
} else {
/* in this case we currently only support 10Gb/FULL */
@@ -1440,7 +1437,7 @@
goto err_nomem;
}
- tx_ring->size = tx_ring->count * sizeof(struct ixgbe_legacy_tx_desc);
+ tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
tx_ring->size = ALIGN(tx_ring->size, 4096);
if (!(tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
&tx_ring->dma))) {
@@ -1454,7 +1451,7 @@
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAH(0),
((u64) tx_ring->dma >> 32));
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDLEN(0),
- tx_ring->count * sizeof(struct ixgbe_legacy_tx_desc));
+ tx_ring->count * sizeof(union ixgbe_adv_tx_desc));
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDH(0), 0);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(0), 0);
@@ -1472,7 +1469,7 @@
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(0), reg_data);
for (i = 0; i < tx_ring->count; i++) {
- struct ixgbe_legacy_tx_desc *desc = IXGBE_TX_DESC(*tx_ring, i);
+ union ixgbe_adv_tx_desc *desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
struct sk_buff *skb;
unsigned int size = 1024;
@@ -1486,13 +1483,18 @@
tx_ring->tx_buffer_info[i].length = skb->len;
tx_ring->tx_buffer_info[i].dma =
pci_map_single(pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
- desc->buffer_addr = cpu_to_le64(tx_ring->tx_buffer_info[i].dma);
- desc->lower.data = cpu_to_le32(skb->len);
- desc->lower.data |= cpu_to_le32(IXGBE_TXD_CMD_EOP |
- IXGBE_TXD_CMD_IFCS |
- IXGBE_TXD_CMD_RS);
- desc->upper.data = 0;
+ PCI_DMA_TODEVICE);
+ desc->read.buffer_addr =
+ cpu_to_le64(tx_ring->tx_buffer_info[i].dma);
+ desc->read.cmd_type_len = cpu_to_le32(skb->len);
+ desc->read.cmd_type_len |= cpu_to_le32(IXGBE_TXD_CMD_EOP |
+ IXGBE_TXD_CMD_IFCS |
+ IXGBE_TXD_CMD_RS);
+ desc->read.olinfo_status = 0;
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ desc->read.olinfo_status |=
+ (skb->len << IXGBE_ADVTXD_PAYLEN_SHIFT);
+
}
/* Setup Rx Descriptor ring and Rx buffers */
@@ -1508,7 +1510,7 @@
goto err_nomem;
}
- rx_ring->size = rx_ring->count * sizeof(struct ixgbe_legacy_rx_desc);
+ rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
rx_ring->size = ALIGN(rx_ring->size, 4096);
if (!(rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
&rx_ring->dma))) {
@@ -1566,8 +1568,8 @@
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl);
for (i = 0; i < rx_ring->count; i++) {
- struct ixgbe_legacy_rx_desc *rx_desc =
- IXGBE_RX_DESC(*rx_ring, i);
+ union ixgbe_adv_rx_desc *rx_desc =
+ IXGBE_RX_DESC_ADV(*rx_ring, i);
struct sk_buff *skb;
skb = alloc_skb(IXGBE_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
@@ -1580,7 +1582,7 @@
rx_ring->rx_buffer_info[i].dma =
pci_map_single(pdev, skb->data, IXGBE_RXBUFFER_2048,
PCI_DMA_FROMDEVICE);
- rx_desc->buffer_addr =
+ rx_desc->read.pkt_addr =
cpu_to_le64(rx_ring->rx_buffer_info[i].dma);
memset(skb->data, 0x00, skb->len);
}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 28cf104..a3c9f99 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -27,6 +27,9 @@
#include "ixgbe.h"
+#ifdef CONFIG_IXGBE_DCB
+#include "ixgbe_dcb_82599.h"
+#endif /* CONFIG_IXGBE_DCB */
#include <linux/if_ether.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -289,6 +292,7 @@
struct sk_buff *skb)
{
u16 xid;
+ u32 fctl;
u32 sterr, fceofe, fcerr, fcstat;
int rc = -EINVAL;
struct ixgbe_fcoe *fcoe;
@@ -309,7 +313,12 @@
skb_set_transport_header(skb, skb_network_offset(skb) +
sizeof(struct fcoe_hdr));
fh = (struct fc_frame_header *)skb_transport_header(skb);
- xid = be16_to_cpu(fh->fh_ox_id);
+ fctl = ntoh24(fh->fh_f_ctl);
+ if (fctl & FC_FC_EX_CTX)
+ xid = be16_to_cpu(fh->fh_ox_id);
+ else
+ xid = be16_to_cpu(fh->fh_rx_id);
+
if (xid >= IXGBE_FCOE_DDP_MAX)
goto ddp_out;
@@ -554,3 +563,158 @@
fcoe->pool = NULL;
}
}
+
+/**
+ * ixgbe_fcoe_enable - turn on FCoE offload feature
+ * @netdev: the corresponding netdev
+ *
+ * Turns on FCoE offload feature in 82599.
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_fcoe_enable(struct net_device *netdev)
+{
+ int rc = -EINVAL;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
+ goto out_enable;
+
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+ goto out_enable;
+
+ DPRINTK(DRV, INFO, "Enabling FCoE offload features.\n");
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_stop(netdev);
+
+ ixgbe_clear_interrupt_scheme(adapter);
+
+ adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+ netdev->features |= NETIF_F_FCOE_CRC;
+ netdev->features |= NETIF_F_FSO;
+ netdev->features |= NETIF_F_FCOE_MTU;
+ netdev->vlan_features |= NETIF_F_FCOE_CRC;
+ netdev->vlan_features |= NETIF_F_FSO;
+ netdev->vlan_features |= NETIF_F_FCOE_MTU;
+ netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+ netdev_features_change(netdev);
+
+ ixgbe_init_interrupt_scheme(adapter);
+
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_open(netdev);
+ rc = 0;
+
+out_enable:
+ return rc;
+}
+
+/**
+ * ixgbe_fcoe_disable - turn off FCoE offload feature
+ * @netdev: the corresponding netdev
+ *
+ * Turns off FCoE offload feature in 82599.
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_fcoe_disable(struct net_device *netdev)
+{
+ int rc = -EINVAL;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
+ goto out_disable;
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+ goto out_disable;
+
+ DPRINTK(DRV, INFO, "Disabling FCoE offload features.\n");
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_stop(netdev);
+
+ ixgbe_clear_interrupt_scheme(adapter);
+
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
+ netdev->features &= ~NETIF_F_FCOE_CRC;
+ netdev->features &= ~NETIF_F_FSO;
+ netdev->features &= ~NETIF_F_FCOE_MTU;
+ netdev->vlan_features &= ~NETIF_F_FCOE_CRC;
+ netdev->vlan_features &= ~NETIF_F_FSO;
+ netdev->vlan_features &= ~NETIF_F_FCOE_MTU;
+ netdev->fcoe_ddp_xid = 0;
+ netdev_features_change(netdev);
+
+ ixgbe_cleanup_fcoe(adapter);
+
+ ixgbe_init_interrupt_scheme(adapter);
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_open(netdev);
+ rc = 0;
+
+out_disable:
+ return rc;
+}
+
+#ifdef CONFIG_IXGBE_DCB
+/**
+ * ixgbe_fcoe_getapp - retrieves current user priority bitmap for FCoE
+ * @adapter : ixgbe adapter
+ *
+ * Finds out the corresponding user priority bitmap from the current
+ * traffic class that FCoE belongs to. Returns 0 as the invalid user
+ * priority bitmap to indicate an error.
+ *
+ * Returns : 802.1p user priority bitmap for FCoE
+ */
+u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter)
+{
+ int i;
+ u8 tc;
+ u32 up2tc;
+
+ up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
+ for (i = 0; i < MAX_USER_PRIORITY; i++) {
+ tc = (u8)(up2tc >> (i * IXGBE_RTTUP2TC_UP_SHIFT));
+ tc &= (MAX_TRAFFIC_CLASS - 1);
+ if (adapter->fcoe.tc == tc)
+ return 1 << i;
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_fcoe_setapp - sets the user priority bitmap for FCoE
+ * @adapter : ixgbe adapter
+ * @up : 802.1p user priority bitmap
+ *
+ * Finds out the traffic class from the input user priority
+ * bitmap for FCoE.
+ *
+ * Returns : 0 on success otherwise returns 1 on error
+ */
+u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up)
+{
+ int i;
+ u32 up2tc;
+
+ /* valid user priority bitmap must not be 0 */
+ if (up) {
+ /* from user priority to the corresponding traffic class */
+ up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
+ for (i = 0; i < MAX_USER_PRIORITY; i++) {
+ if (up & (1 << i)) {
+ up2tc >>= (i * IXGBE_RTTUP2TC_UP_SHIFT);
+ up2tc &= (MAX_TRAFFIC_CLASS - 1);
+ adapter->fcoe.tc = (u8)up2tc;
+ return 0;
+ }
+ }
+ }
+
+ return 1;
+}
+#endif /* CONFIG_IXGBE_DCB */
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index c5b5002..b5dee7b 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -46,6 +46,9 @@
#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */
#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */
+/* Default traffic class to use for FCoE */
+#define IXGBE_FCOE_DEFTC 3
+
/* fcerr */
#define IXGBE_FCERR_BADCRC 0x00100000
@@ -59,6 +62,7 @@
};
struct ixgbe_fcoe {
+ u8 tc;
spinlock_t lock;
struct pci_pool *pool;
struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 77b0381..45bf8b9 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -49,7 +49,7 @@
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-#define DRV_VERSION "2.0.34-k2"
+#define DRV_VERSION "2.0.37-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
@@ -75,6 +75,8 @@
board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT),
board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2),
+ board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
@@ -2024,7 +2026,7 @@
else
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+ if (netdev->features & NETIF_F_FCOE_MTU)
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
#endif
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
@@ -2055,7 +2057,7 @@
rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+ if (netdev->features & NETIF_F_FCOE_MTU) {
struct ixgbe_ring_feature *f;
f = &adapter->ring_feature[RING_F_FCOE];
if ((i >= f->mask) && (i < f->mask + f->indices)) {
@@ -2514,7 +2516,7 @@
static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
{
u32 autoneg;
- bool link_up = false;
+ bool negotiation, link_up = false;
u32 ret = IXGBE_ERR_LINK_SETUP;
if (hw->mac.ops.check_link)
@@ -2524,13 +2526,12 @@
goto link_cfg_out;
if (hw->mac.ops.get_link_capabilities)
- ret = hw->mac.ops.get_link_capabilities(hw, &autoneg,
- &hw->mac.autoneg);
+ ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
if (ret)
goto link_cfg_out;
- if (hw->mac.ops.setup_link_speed)
- ret = hw->mac.ops.setup_link_speed(hw, autoneg, true, link_up);
+ if (hw->mac.ops.setup_link)
+ ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up);
link_cfg_out:
return ret;
}
@@ -2607,7 +2608,7 @@
#ifdef IXGBE_FCOE
/* adjust max frame to be able to do baby jumbo for FCoE */
- if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ if ((netdev->features & NETIF_F_FCOE_MTU) &&
(max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
@@ -3112,14 +3113,16 @@
f->indices = min((int)num_online_cpus(), f->indices);
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- DPRINTK(PROBE, INFO, "FCOE enabled with DCB \n");
+ DPRINTK(PROBE, INFO, "FCoE enabled with DCB \n");
ixgbe_set_dcb_queues(adapter);
}
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
+ DPRINTK(PROBE, INFO, "FCoE enabled with RSS \n");
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
ixgbe_set_fdir_queues(adapter);
@@ -3129,8 +3132,7 @@
/* adding FCoE rx rings to the end */
f->mask = adapter->num_rx_queues;
adapter->num_rx_queues += f->indices;
- if (adapter->num_tx_queues == 0)
- adapter->num_tx_queues = f->indices;
+ adapter->num_tx_queues += f->indices;
ret = true;
}
@@ -3370,15 +3372,36 @@
*/
static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
{
- int i, fcoe_i = 0;
+ int i, fcoe_rx_i = 0, fcoe_tx_i = 0;
bool ret = false;
struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
ixgbe_cache_ring_dcb(adapter);
- fcoe_i = adapter->rx_ring[0].reg_idx + 1;
+ /* find out queues in TC for FCoE */
+ fcoe_rx_i = adapter->rx_ring[fcoe->tc].reg_idx + 1;
+ fcoe_tx_i = adapter->tx_ring[fcoe->tc].reg_idx + 1;
+ /*
+ * In 82599, the number of Tx queues for each traffic
+ * class for both 8-TC and 4-TC modes are:
+ * TCs : TC0 TC1 TC2 TC3 TC4 TC5 TC6 TC7
+ * 8 TCs: 32 32 16 16 8 8 8 8
+ * 4 TCs: 64 64 32 32
+ * We have max 8 queues for FCoE, where 8 the is
+ * FCoE redirection table size. If TC for FCoE is
+ * less than or equal to TC3, we have enough queues
+ * to add max of 8 queues for FCoE, so we start FCoE
+ * tx descriptor from the next one, i.e., reg_idx + 1.
+ * If TC for FCoE is above TC3, implying 8 TC mode,
+ * and we need 8 for FCoE, we have to take all queues
+ * in that traffic class for FCoE.
+ */
+ if ((f->indices == IXGBE_FCRETA_SIZE) && (fcoe->tc > 3))
+ fcoe_tx_i--;
}
#endif /* CONFIG_IXGBE_DCB */
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
@@ -3388,10 +3411,13 @@
else
ixgbe_cache_ring_rss(adapter);
- fcoe_i = f->mask;
+ fcoe_rx_i = f->mask;
+ fcoe_tx_i = f->mask;
}
- for (i = 0; i < f->indices; i++, fcoe_i++)
- adapter->rx_ring[f->mask + i].reg_idx = fcoe_i;
+ for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
+ adapter->rx_ring[f->mask + i].reg_idx = fcoe_rx_i;
+ adapter->tx_ring[f->mask + i].reg_idx = fcoe_tx_i;
+ }
ret = true;
}
return ret;
@@ -3613,7 +3639,7 @@
}
}
-void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
+static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
{
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
@@ -3799,6 +3825,8 @@
adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
adapter->ring_feature[RING_F_FCOE].indices = 0;
+ /* Default traffic class to use for FCoE */
+ adapter->fcoe.tc = IXGBE_FCOE_DEFTC;
#endif /* IXGBE_FCOE */
}
@@ -4513,14 +4541,14 @@
multispeed_fiber_task);
struct ixgbe_hw *hw = &adapter->hw;
u32 autoneg;
+ bool negotiation;
adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
autoneg = hw->phy.autoneg_advertised;
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
- hw->mac.ops.get_link_capabilities(hw, &autoneg,
- &hw->mac.autoneg);
- if (hw->mac.ops.setup_link_speed)
- hw->mac.ops.setup_link_speed(hw, autoneg, true, true);
+ hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+ if (hw->mac.ops.setup_link)
+ hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK;
}
@@ -4634,13 +4662,13 @@
if (hw->mac.type == ixgbe_mac_82599EB) {
u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
- flow_rx = (mflcn & IXGBE_MFLCN_RFCE);
- flow_tx = (fccfg & IXGBE_FCCFG_TFCE_802_3X);
+ flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
+ flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
} else {
u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
- flow_rx = (frctl & IXGBE_FCTRL_RFCE);
- flow_tx = (rmcs & IXGBE_RMCS_TFCE_802_3X);
+ flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
+ flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
}
printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, "
@@ -5100,12 +5128,13 @@
return smp_processor_id();
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
- return 0; /* All traffic should default to class 0 */
+ return (skb->vlan_tci & IXGBE_TX_FLAGS_VLAN_PRIO_MASK) >> 13;
return skb_tx_hash(dev, skb);
}
-static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_ring *tx_ring;
@@ -5139,9 +5168,15 @@
tx_ring = &adapter->tx_ring[r_idx];
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- (skb->protocol == htons(ETH_P_FCOE)))
+ (skb->protocol == htons(ETH_P_FCOE))) {
tx_flags |= IXGBE_TX_FLAGS_FCOE;
-
+#ifdef IXGBE_FCOE
+ r_idx = smp_processor_id();
+ r_idx &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
+ r_idx += adapter->ring_feature[RING_F_FCOE].mask;
+ tx_ring = &adapter->tx_ring[r_idx];
+#endif
+ }
/* four things can cause us to need a context descriptor */
if (skb_is_gso(skb) ||
(skb->ip_summed == CHECKSUM_PARTIAL) ||
@@ -5374,6 +5409,8 @@
#ifdef IXGBE_FCOE
.ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
+ .ndo_fcoe_enable = ixgbe_fcoe_enable,
+ .ndo_fcoe_disable = ixgbe_fcoe_disable,
#endif /* IXGBE_FCOE */
};
@@ -5573,6 +5610,7 @@
netdev->vlan_features |= NETIF_F_TSO;
netdev->vlan_features |= NETIF_F_TSO6;
netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
netdev->vlan_features |= NETIF_F_SG;
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index be90eb4..8ba90ee 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -42,6 +42,7 @@
#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB
#define IXGBE_DEV_ID_82598AT 0x10C8
+#define IXGBE_DEV_ID_82598AT2 0x150B
#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1
@@ -1901,27 +1902,6 @@
#define IXGBE_FDIR_INIT_DONE_POLL 10
#define IXGBE_FDIRCMD_CMD_POLL 10
-/* Transmit Descriptor - Legacy */
-struct ixgbe_legacy_tx_desc {
- u64 buffer_addr; /* Address of the descriptor's data buffer */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 cso; /* Checksum offset */
- u8 cmd; /* Descriptor control */
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 css; /* Checksum start */
- __le16 vlan;
- } fields;
- } upper;
-};
-
/* Transmit Descriptor - Advanced */
union ixgbe_adv_tx_desc {
struct {
@@ -1936,16 +1916,6 @@
} wb;
};
-/* Receive Descriptor - Legacy */
-struct ixgbe_legacy_rx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 length; /* Length of data DMAed into data buffer */
- __le16 csum; /* Packet checksum */
- u8 status; /* Descriptor status */
- u8 errors; /* Descriptor Errors */
- __le16 vlan;
-};
-
/* Receive Descriptor - Advanced */
union ixgbe_adv_rx_desc {
struct {
@@ -2362,9 +2332,7 @@
s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
/* Link */
- s32 (*setup_link)(struct ixgbe_hw *);
- s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool,
- bool);
+ s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
bool *);
@@ -2436,8 +2404,6 @@
u32 orig_autoc;
u32 orig_autoc2;
bool orig_link_settings_stored;
- bool autoneg;
- bool autoneg_succeeded;
bool autotry_restart;
};
@@ -2452,7 +2418,6 @@
enum ixgbe_media_type media_type;
bool reset_disable;
ixgbe_autoneg_advertised autoneg_advertised;
- bool autoneg_wait_to_complete;
bool multispeed_fiber;
};
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 2a0174b..1272434 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -41,11 +41,12 @@
struct ixpdev_priv *ip = netdev_priv(dev);
struct ixpdev_tx_desc *desc;
int entry;
+ unsigned long flags;
if (unlikely(skb->len > PAGE_SIZE)) {
/* @@@ Count drops. */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
entry = tx_pointer;
@@ -63,13 +64,13 @@
dev->trans_start = jiffies;
- local_irq_disable();
+ local_irq_save(flags);
ip->tx_queue_entries++;
if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN)
netif_stop_queue(dev);
- local_irq_enable();
+ local_irq_restore(flags);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 2f28609..6e5b3f3 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -108,7 +108,7 @@
.ndo_set_mac_address = eth_mac_addr,
};
-static int __init sonic_probe1(struct net_device *dev)
+static int __devinit sonic_probe1(struct net_device *dev)
{
static unsigned version_printed;
unsigned int silicon_revision;
@@ -203,7 +203,7 @@
return 0;
out:
- release_region(dev->base_addr, SONIC_MEM_SIZE);
+ release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
return err;
}
@@ -211,7 +211,7 @@
* Probe for a SONIC ethernet controller on a Mips Jazz board.
* Actually probing is superfluous but we're paranoid.
*/
-static int __init jazz_sonic_probe(struct platform_device *pdev)
+static int __devinit jazz_sonic_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct sonic_local *lp;
@@ -247,7 +247,7 @@
return 0;
out1:
- release_region(dev->base_addr, SONIC_MEM_SIZE);
+ release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
out:
free_netdev(dev);
@@ -269,7 +269,7 @@
unregister_netdev(dev);
dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
- release_region (dev->base_addr, SONIC_MEM_SIZE);
+ release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
free_netdev(dev);
return 0;
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 1e3c63d..1d2a325 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -322,20 +322,6 @@
jwrite32f(jme, JME_IENC, INTR_ENABLE);
}
-static inline void
-jme_enable_shadow(struct jme_adapter *jme)
-{
- jwrite32(jme,
- JME_SHBA_LO,
- ((u32)jme->shadow_dma & ~((u32)0x1F)) | SHBA_POSTEN);
-}
-
-static inline void
-jme_disable_shadow(struct jme_adapter *jme)
-{
- jwrite32(jme, JME_SHBA_LO, 0x0);
-}
-
static u32
jme_linkstat_from_phy(struct jme_adapter *jme)
{
@@ -522,12 +508,8 @@
&(txring->dmaalloc),
GFP_ATOMIC);
- if (!txring->alloc) {
- txring->desc = NULL;
- txring->dmaalloc = 0;
- txring->dma = 0;
- return -ENOMEM;
- }
+ if (!txring->alloc)
+ goto err_set_null;
/*
* 16 Bytes align
@@ -539,6 +521,11 @@
atomic_set(&txring->next_to_clean, 0);
atomic_set(&txring->nr_free, jme->tx_ring_size);
+ txring->bufinf = kmalloc(sizeof(struct jme_buffer_info) *
+ jme->tx_ring_size, GFP_ATOMIC);
+ if (unlikely(!(txring->bufinf)))
+ goto err_free_txring;
+
/*
* Initialize Transmit Descriptors
*/
@@ -547,6 +534,20 @@
sizeof(struct jme_buffer_info) * jme->tx_ring_size);
return 0;
+
+err_free_txring:
+ dma_free_coherent(&(jme->pdev->dev),
+ TX_RING_ALLOC_SIZE(jme->tx_ring_size),
+ txring->alloc,
+ txring->dmaalloc);
+
+err_set_null:
+ txring->desc = NULL;
+ txring->dmaalloc = 0;
+ txring->dma = 0;
+ txring->bufinf = NULL;
+
+ return -ENOMEM;
}
static void
@@ -554,19 +555,22 @@
{
int i;
struct jme_ring *txring = &(jme->txring[0]);
- struct jme_buffer_info *txbi = txring->bufinf;
+ struct jme_buffer_info *txbi;
if (txring->alloc) {
- for (i = 0 ; i < jme->tx_ring_size ; ++i) {
- txbi = txring->bufinf + i;
- if (txbi->skb) {
- dev_kfree_skb(txbi->skb);
- txbi->skb = NULL;
+ if (txring->bufinf) {
+ for (i = 0 ; i < jme->tx_ring_size ; ++i) {
+ txbi = txring->bufinf + i;
+ if (txbi->skb) {
+ dev_kfree_skb(txbi->skb);
+ txbi->skb = NULL;
+ }
+ txbi->mapping = 0;
+ txbi->len = 0;
+ txbi->nr_desc = 0;
+ txbi->start_xmit = 0;
}
- txbi->mapping = 0;
- txbi->len = 0;
- txbi->nr_desc = 0;
- txbi->start_xmit = 0;
+ kfree(txring->bufinf);
}
dma_free_coherent(&(jme->pdev->dev),
@@ -578,11 +582,11 @@
txring->desc = NULL;
txring->dmaalloc = 0;
txring->dma = 0;
+ txring->bufinf = NULL;
}
txring->next_to_use = 0;
atomic_set(&txring->next_to_clean, 0);
atomic_set(&txring->nr_free, 0);
-
}
static inline void
@@ -653,7 +657,7 @@
static void
jme_set_clean_rxdesc(struct jme_adapter *jme, int i)
{
- struct jme_ring *rxring = jme->rxring;
+ struct jme_ring *rxring = &(jme->rxring[0]);
register struct rxdesc *rxdesc = rxring->desc;
struct jme_buffer_info *rxbi = rxring->bufinf;
rxdesc += i;
@@ -720,8 +724,11 @@
struct jme_ring *rxring = &(jme->rxring[0]);
if (rxring->alloc) {
- for (i = 0 ; i < jme->rx_ring_size ; ++i)
- jme_free_rx_buf(jme, i);
+ if (rxring->bufinf) {
+ for (i = 0 ; i < jme->rx_ring_size ; ++i)
+ jme_free_rx_buf(jme, i);
+ kfree(rxring->bufinf);
+ }
dma_free_coherent(&(jme->pdev->dev),
RX_RING_ALLOC_SIZE(jme->rx_ring_size),
@@ -731,6 +738,7 @@
rxring->desc = NULL;
rxring->dmaalloc = 0;
rxring->dma = 0;
+ rxring->bufinf = NULL;
}
rxring->next_to_use = 0;
atomic_set(&rxring->next_to_clean, 0);
@@ -746,12 +754,8 @@
RX_RING_ALLOC_SIZE(jme->rx_ring_size),
&(rxring->dmaalloc),
GFP_ATOMIC);
- if (!rxring->alloc) {
- rxring->desc = NULL;
- rxring->dmaalloc = 0;
- rxring->dma = 0;
- return -ENOMEM;
- }
+ if (!rxring->alloc)
+ goto err_set_null;
/*
* 16 Bytes align
@@ -762,9 +766,16 @@
rxring->next_to_use = 0;
atomic_set(&rxring->next_to_clean, 0);
+ rxring->bufinf = kmalloc(sizeof(struct jme_buffer_info) *
+ jme->rx_ring_size, GFP_ATOMIC);
+ if (unlikely(!(rxring->bufinf)))
+ goto err_free_rxring;
+
/*
* Initiallize Receive Descriptors
*/
+ memset(rxring->bufinf, 0,
+ sizeof(struct jme_buffer_info) * jme->rx_ring_size);
for (i = 0 ; i < jme->rx_ring_size ; ++i) {
if (unlikely(jme_make_new_rx_buf(jme, i))) {
jme_free_rx_resources(jme);
@@ -775,6 +786,19 @@
}
return 0;
+
+err_free_rxring:
+ dma_free_coherent(&(jme->pdev->dev),
+ RX_RING_ALLOC_SIZE(jme->rx_ring_size),
+ rxring->alloc,
+ rxring->dmaalloc);
+err_set_null:
+ rxring->desc = NULL;
+ rxring->dmaalloc = 0;
+ rxring->dma = 0;
+ rxring->bufinf = NULL;
+
+ return -ENOMEM;
}
static inline void
@@ -790,9 +814,9 @@
/*
* Setup RX DMA Bass Address
*/
- jwrite32(jme, JME_RXDBA_LO, (__u64)jme->rxring[0].dma & 0xFFFFFFFFUL);
+ jwrite32(jme, JME_RXDBA_LO, (__u64)(jme->rxring[0].dma) & 0xFFFFFFFFUL);
jwrite32(jme, JME_RXDBA_HI, (__u64)(jme->rxring[0].dma) >> 32);
- jwrite32(jme, JME_RXNDA, (__u64)jme->rxring[0].dma & 0xFFFFFFFFUL);
+ jwrite32(jme, JME_RXNDA, (__u64)(jme->rxring[0].dma) & 0xFFFFFFFFUL);
/*
* Setup RX Descriptor Count
@@ -856,27 +880,27 @@
if (!(flags & (RXWBFLAG_TCPON | RXWBFLAG_UDPON | RXWBFLAG_IPV4)))
return false;
- if (unlikely(!(flags & RXWBFLAG_MF) &&
- (flags & RXWBFLAG_TCPON) && !(flags & RXWBFLAG_TCPCS))) {
- msg_rx_err(jme, "TCP Checksum error.\n");
- goto out_sumerr;
+ if (unlikely((flags & (RXWBFLAG_MF | RXWBFLAG_TCPON | RXWBFLAG_TCPCS))
+ == RXWBFLAG_TCPON)) {
+ if (flags & RXWBFLAG_IPV4)
+ msg_rx_err(jme, "TCP Checksum error\n");
+ return false;
}
- if (unlikely(!(flags & RXWBFLAG_MF) &&
- (flags & RXWBFLAG_UDPON) && !(flags & RXWBFLAG_UDPCS))) {
- msg_rx_err(jme, "UDP Checksum error.\n");
- goto out_sumerr;
+ if (unlikely((flags & (RXWBFLAG_MF | RXWBFLAG_UDPON | RXWBFLAG_UDPCS))
+ == RXWBFLAG_UDPON)) {
+ if (flags & RXWBFLAG_IPV4)
+ msg_rx_err(jme, "UDP Checksum error.\n");
+ return false;
}
- if (unlikely((flags & RXWBFLAG_IPV4) && !(flags & RXWBFLAG_IPCS))) {
+ if (unlikely((flags & (RXWBFLAG_IPV4 | RXWBFLAG_IPCS))
+ == RXWBFLAG_IPV4)) {
msg_rx_err(jme, "IPv4 Checksum error.\n");
- goto out_sumerr;
+ return false;
}
return true;
-
-out_sumerr:
- return false;
}
static void
@@ -1296,7 +1320,7 @@
static void
jme_wake_queue_if_stopped(struct jme_adapter *jme)
{
- struct jme_ring *txring = jme->txring;
+ struct jme_ring *txring = &(jme->txring[0]);
smp_wmb();
if (unlikely(netif_queue_stopped(jme->dev) &&
@@ -1483,12 +1507,7 @@
struct jme_adapter *jme = netdev_priv(netdev);
u32 intrstat;
- pci_dma_sync_single_for_cpu(jme->pdev,
- jme->shadow_dma,
- sizeof(u32) * SHADOW_REG_NR,
- PCI_DMA_FROMDEVICE);
- intrstat = jme->shadow_regs[SHADOW_IEVE];
- jme->shadow_regs[SHADOW_IEVE] = 0;
+ intrstat = jread32(jme, JME_IEVE);
jme_intr_msi(jme, intrstat);
@@ -1566,6 +1585,7 @@
jme_clear_pm(jme);
JME_NAPI_ENABLE(jme);
+ tasklet_enable(&jme->linkch_task);
tasklet_enable(&jme->txclean_task);
tasklet_hi_enable(&jme->rxclean_task);
tasklet_hi_enable(&jme->rxempty_task);
@@ -1574,7 +1594,6 @@
if (rc)
goto err_out;
- jme_enable_shadow(jme);
jme_start_irq(jme);
if (test_bit(JME_FLAG_SSET, &jme->flags))
@@ -1642,15 +1661,14 @@
netif_carrier_off(netdev);
jme_stop_irq(jme);
- jme_disable_shadow(jme);
jme_free_irq(jme);
JME_NAPI_DISABLE(jme);
- tasklet_kill(&jme->linkch_task);
- tasklet_kill(&jme->txclean_task);
- tasklet_kill(&jme->rxclean_task);
- tasklet_kill(&jme->rxempty_task);
+ tasklet_disable(&jme->linkch_task);
+ tasklet_disable(&jme->txclean_task);
+ tasklet_disable(&jme->rxclean_task);
+ tasklet_disable(&jme->rxempty_task);
jme_reset_ghc_speed(jme);
jme_disable_rx_engine(jme);
@@ -1668,7 +1686,7 @@
jme_alloc_txdesc(struct jme_adapter *jme,
struct sk_buff *skb)
{
- struct jme_ring *txring = jme->txring;
+ struct jme_ring *txring = &(jme->txring[0]);
int idx, nr_alloc, mask = jme->tx_ring_mask;
idx = txring->next_to_use;
@@ -1722,7 +1740,7 @@
static void
jme_map_tx_skb(struct jme_adapter *jme, struct sk_buff *skb, int idx)
{
- struct jme_ring *txring = jme->txring;
+ struct jme_ring *txring = &(jme->txring[0]);
struct txdesc *txdesc = txring->desc, *ctxdesc;
struct jme_buffer_info *txbi = txring->bufinf, *ctxbi;
u8 hidma = jme->dev->features & NETIF_F_HIGHDMA;
@@ -1835,7 +1853,7 @@
static int
jme_fill_tx_desc(struct jme_adapter *jme, struct sk_buff *skb, int idx)
{
- struct jme_ring *txring = jme->txring;
+ struct jme_ring *txring = &(jme->txring[0]);
struct txdesc *txdesc;
struct jme_buffer_info *txbi;
u8 flags;
@@ -1883,7 +1901,7 @@
static void
jme_stop_queue_if_full(struct jme_adapter *jme)
{
- struct jme_ring *txring = jme->txring;
+ struct jme_ring *txring = &(jme->txring[0]);
struct jme_buffer_info *txbi = txring->bufinf;
int idx = atomic_read(&txring->next_to_clean);
@@ -1913,7 +1931,7 @@
* This function is already protected by netif_tx_lock()
*/
-static int
+static netdev_tx_t
jme_start_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct jme_adapter *jme = netdev_priv(netdev);
@@ -2725,14 +2743,6 @@
rc = -ENOMEM;
goto err_out_free_netdev;
}
- jme->shadow_regs = pci_alloc_consistent(pdev,
- sizeof(u32) * SHADOW_REG_NR,
- &(jme->shadow_dma));
- if (!(jme->shadow_regs)) {
- jeprintk(pdev, "Allocating shadow register mapping error.\n");
- rc = -ENOMEM;
- goto err_out_unmap;
- }
if (no_pseudohp) {
apmc = jread32(jme, JME_APMC) & ~JME_APMC_PSEUDO_HP_EN;
@@ -2768,6 +2778,7 @@
tasklet_init(&jme->rxempty_task,
&jme_rx_empty_tasklet,
(unsigned long) jme);
+ tasklet_disable_nosync(&jme->linkch_task);
tasklet_disable_nosync(&jme->txclean_task);
tasklet_disable_nosync(&jme->rxclean_task);
tasklet_disable_nosync(&jme->rxempty_task);
@@ -2817,7 +2828,7 @@
if (!jme->mii_if.phy_id) {
rc = -EIO;
jeprintk(pdev, "Can not find phy_id.\n");
- goto err_out_free_shadow;
+ goto err_out_unmap;
}
jme->reg_ghc |= GHC_LINK_POLL;
@@ -2846,7 +2857,7 @@
if (rc) {
jeprintk(pdev,
"Reload eeprom for reading MAC Address error.\n");
- goto err_out_free_shadow;
+ goto err_out_unmap;
}
jme_load_macaddr(netdev);
@@ -2862,7 +2873,7 @@
rc = register_netdev(netdev);
if (rc) {
jeprintk(pdev, "Cannot register net device.\n");
- goto err_out_free_shadow;
+ goto err_out_unmap;
}
msg_probe(jme, "%s%s ver:%x rev:%x macaddr:%pM\n",
@@ -2876,11 +2887,6 @@
return 0;
-err_out_free_shadow:
- pci_free_consistent(pdev,
- sizeof(u32) * SHADOW_REG_NR,
- jme->shadow_regs,
- jme->shadow_dma);
err_out_unmap:
iounmap(jme->regs);
err_out_free_netdev:
@@ -2901,10 +2907,6 @@
struct jme_adapter *jme = netdev_priv(netdev);
unregister_netdev(netdev);
- pci_free_consistent(pdev,
- sizeof(u32) * SHADOW_REG_NR,
- jme->shadow_regs,
- jme->shadow_dma);
iounmap(jme->regs);
pci_set_drvdata(pdev, NULL);
free_netdev(netdev);
@@ -2930,8 +2932,6 @@
tasklet_disable(&jme->rxclean_task);
tasklet_disable(&jme->rxempty_task);
- jme_disable_shadow(jme);
-
if (netif_carrier_ok(netdev)) {
if (test_bit(JME_FLAG_POLL, &jme->flags))
jme_polling_mode(jme);
@@ -2983,7 +2983,6 @@
else
jme_reset_phy_processor(jme);
- jme_enable_shadow(jme);
jme_start_irq(jme);
netif_device_attach(netdev);
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index 0996a06..251abed 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -25,7 +25,7 @@
#define __JME_H_INCLUDED__
#define DRV_NAME "jme"
-#define DRV_VERSION "1.0.4"
+#define DRV_VERSION "1.0.5"
#define PFX DRV_NAME ": "
#define PCI_DEVICE_ID_JMICRON_JMC250 0x0250
@@ -247,7 +247,7 @@
};
#define TXDESC_MSS_SHIFT 2
-enum jme_rxdescwb_flags_bits {
+enum jme_txwbdesc_flags_bits {
TXWBFLAG_OWN = 0x80,
TXWBFLAG_INT = 0x40,
TXWBFLAG_TMOUT = 0x20,
@@ -372,7 +372,6 @@
/*
* The structure holding buffer information and ring descriptors all together.
*/
-#define MAX_RING_DESC_NR 1024
struct jme_ring {
void *alloc; /* pointer to allocated memory */
void *desc; /* pointer to ring memory */
@@ -380,7 +379,7 @@
dma_addr_t dma; /* phys address for ring dma */
/* Buffer information corresponding to each descriptor */
- struct jme_buffer_info bufinf[MAX_RING_DESC_NR];
+ struct jme_buffer_info *bufinf;
int next_to_use;
atomic_t next_to_clean;
@@ -411,13 +410,10 @@
/*
* Jmac Adapter Private data
*/
-#define SHADOW_REG_NR 8
struct jme_adapter {
struct pci_dev *pdev;
struct net_device *dev;
void __iomem *regs;
- dma_addr_t shadow_dma;
- u32 *shadow_regs;
struct mii_if_info mii_if;
struct jme_ring rxring[RX_RING_NR];
struct jme_ring txring[TX_RING_NR];
@@ -464,10 +460,6 @@
DECLARE_NET_DEVICE_STATS
};
-enum shadow_reg_val {
- SHADOW_IEVE = 0,
-};
-
enum jme_flags_bits {
JME_FLAG_MSI = 1,
JME_FLAG_SSET = 2,
@@ -1104,13 +1096,6 @@
};
/*
- * Shadow base address register bits
- */
-enum jme_shadow_base_address_bits {
- SHBA_POSTEN = 0x1,
-};
-
-/*
* Aggressive Power Mode Control
*/
enum jme_apmc_bits {
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index b4cf602..03199fa 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -338,7 +338,7 @@
napi_schedule(&lp->napi);
if (dmas & DMA_STAT_ERR)
- printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+ printk(KERN_ERR "%s: DMA error\n", dev->name);
retval = IRQ_HANDLED;
} else
@@ -555,7 +555,7 @@
dev->stats.tx_dropped++;
/* Should never happen */
- printk(KERN_ERR DRV_NAME "%s: split tx ignored\n",
+ printk(KERN_ERR "%s: split tx ignored\n",
dev->name);
} else if (devcs & ETH_TX_TOK) {
dev->stats.tx_packets++;
@@ -641,7 +641,7 @@
dev->trans_start = jiffies;
}
if (dmas & DMA_STAT_ERR)
- printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+ printk(KERN_ERR "%s: DMA error\n", dev->name);
retval = IRQ_HANDLED;
} else
@@ -743,14 +743,14 @@
return mii_link_ok(&lp->mii_if);
}
-static struct ethtool_ops netdev_ethtool_ops = {
+static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
.get_settings = netdev_get_settings,
.set_settings = netdev_set_settings,
.get_link = netdev_get_link,
};
-static void korina_alloc_ring(struct net_device *dev)
+static int korina_alloc_ring(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
struct sk_buff *skb;
@@ -771,7 +771,7 @@
for (i = 0; i < KORINA_NUM_RDS; i++) {
skb = dev_alloc_skb(KORINA_RBSIZE + 2);
if (!skb)
- break;
+ return -ENOMEM;
skb_reserve(skb, 2);
lp->rx_skb[i] = skb;
lp->rd_ring[i].control = DMA_DESC_IOD |
@@ -790,6 +790,8 @@
lp->rx_chain_head = 0;
lp->rx_chain_tail = 0;
lp->rx_chain_status = desc_empty;
+
+ return 0;
}
static void korina_free_ring(struct net_device *dev)
@@ -832,7 +834,11 @@
writel(ETH_INT_FC_EN, &lp->eth_regs->ethintfc);
/* Allocate rings */
- korina_alloc_ring(dev);
+ if (korina_alloc_ring(dev)) {
+ printk(KERN_ERR "%s: descriptor allocation failed\n", dev->name);
+ korina_free_ring(dev);
+ return -ENOMEM;
+ }
writel(0, &lp->rx_dma_regs->dmas);
/* Start Rx DMA */
@@ -917,8 +923,7 @@
ret = korina_init(dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
- dev->name);
+ printk(KERN_ERR "%s: cannot restart device\n", dev->name);
return ret;
}
korina_multicast_list(dev);
@@ -1005,7 +1010,7 @@
/* Initialize */
ret = korina_init(dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: cannot open device\n", dev->name);
+ printk(KERN_ERR "%s: cannot open device\n", dev->name);
goto out;
}
@@ -1015,14 +1020,14 @@
ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
IRQF_DISABLED, "Korina ethernet Rx", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get Rx DMA IRQ %d\n",
dev->name, lp->rx_irq);
goto err_release;
}
ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
IRQF_DISABLED, "Korina ethernet Tx", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get Tx DMA IRQ %d\n",
dev->name, lp->tx_irq);
goto err_free_rx_irq;
}
@@ -1031,7 +1036,7 @@
ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
IRQF_DISABLED, "Ethernet Overflow", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get OVR IRQ %d\n",
dev->name, lp->ovr_irq);
goto err_free_tx_irq;
}
@@ -1040,7 +1045,7 @@
ret = request_irq(lp->und_irq, &korina_und_interrupt,
IRQF_DISABLED, "Ethernet Underflow", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get UND IRQ %d\n",
dev->name, lp->und_irq);
goto err_free_ovr_irq;
}
@@ -1137,7 +1142,7 @@
dev->base_addr = r->start;
lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->eth_regs) {
- printk(KERN_ERR DRV_NAME "cannot remap registers\n");
+ printk(KERN_ERR DRV_NAME ": cannot remap registers\n");
rc = -ENXIO;
goto probe_err_out;
}
@@ -1145,7 +1150,7 @@
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx");
lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->rx_dma_regs) {
- printk(KERN_ERR DRV_NAME "cannot remap Rx DMA registers\n");
+ printk(KERN_ERR DRV_NAME ": cannot remap Rx DMA registers\n");
rc = -ENXIO;
goto probe_err_dma_rx;
}
@@ -1153,14 +1158,14 @@
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx");
lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->tx_dma_regs) {
- printk(KERN_ERR DRV_NAME "cannot remap Tx DMA registers\n");
+ printk(KERN_ERR DRV_NAME ": cannot remap Tx DMA registers\n");
rc = -ENXIO;
goto probe_err_dma_tx;
}
lp->td_ring = kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
if (!lp->td_ring) {
- printk(KERN_ERR DRV_NAME "cannot allocate descriptors\n");
+ printk(KERN_ERR DRV_NAME ": cannot allocate descriptors\n");
rc = -ENXIO;
goto probe_err_td_ring;
}
@@ -1193,10 +1198,13 @@
rc = register_netdev(dev);
if (rc < 0) {
printk(KERN_ERR DRV_NAME
- ": cannot register net device %d\n", rc);
+ ": cannot register net device: %d\n", rc);
goto probe_err_register;
}
setup_timer(&lp->media_check_timer, korina_poll_media, (unsigned long) dev);
+
+ printk(KERN_INFO "%s: " DRV_NAME "-" DRV_VERSION " " DRV_RELDATE "\n",
+ dev->name);
out:
return rc;
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index 39b0aea..99e9541 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -551,7 +551,8 @@
return 0;
}
-static int ks8842_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ks8842_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
{
int ret;
struct ks8842_adapter *adapter = netdev_priv(netdev);
@@ -618,7 +619,7 @@
.ndo_validate_addr = eth_validate_addr
};
-static struct ethtool_ops ks8842_ethtool_ops = {
+static const struct ethtool_ops ks8842_ethtool_ops = {
.get_link = ethtool_op_get_link,
};
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 9a1dea6..547ac7c 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -868,11 +868,12 @@
* and secondly so we can round up more than one packet to transmit which
* means we can try and avoid generating too many transmit done interrupts.
*/
-static int ks8851_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ks8851_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ks8851_net *ks = netdev_priv(dev);
unsigned needed = calc_txlen(skb->len);
- int ret = NETDEV_TX_OK;
+ netdev_tx_t ret = NETDEV_TX_OK;
if (netif_msg_tx_queued(ks))
ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__,
diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index 633808d..dcda303 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -300,7 +300,8 @@
static int lance_open(struct net_device *dev);
static void lance_init_ring(struct net_device *dev, gfp_t mode);
-static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int lance_rx(struct net_device *dev);
static irqreturn_t lance_interrupt(int irq, void *dev_id);
static int lance_close(struct net_device *dev);
@@ -949,7 +950,8 @@
}
-static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct lance_private *lp = dev->ml_priv;
int ioaddr = dev->base_addr;
@@ -1016,7 +1018,7 @@
out:
spin_unlock_irqrestore(&lp->devlock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* The LANCE interrupt handler. */
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 070fa45..51e11c3 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -983,7 +983,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
@@ -1028,7 +1028,7 @@
netif_start_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
static void print_eth(unsigned char *add, char *str)
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index f28c233..2561198 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -299,7 +299,8 @@
* Sends a packet to an 8390 network device.
*/
-static int __ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t __ei_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
unsigned long e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
@@ -414,7 +415,7 @@
dev_kfree_skb (skb);
dev->stats.tx_bytes += send_length;
- return 0;
+ return NETDEV_TX_OK;
}
/**
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 96e7248..da8d0a0 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -591,7 +591,7 @@
/* Kick off the transfer */
temac_dma_out32(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index da472c6..1bc654a 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -69,7 +69,8 @@
* The higher levels take care of making this non-reentrant (it's
* called with bh's disabled).
*/
-static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t loopback_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct pcpu_lstats *pcpu_lstats, *lb_stats;
int len;
@@ -89,7 +90,7 @@
} else
lb_stats->drops++;
- return 0;
+ return NETDEV_TX_OK;
}
static struct net_device_stats *loopback_get_stats(struct net_device *dev)
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index d44bddb..cc3ed9c 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -377,7 +377,7 @@
};
static int i596_open(struct net_device *dev);
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t i596_interrupt(int irq, void *dev_id);
static int i596_close(struct net_device *dev);
static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
@@ -863,7 +863,7 @@
return 0; /* Always succeed */
}
-static int i596_start_xmit (struct sk_buff *skb, struct net_device *dev) {
+static netdev_tx_t i596_start_xmit (struct sk_buff *skb, struct net_device *dev) {
struct tx_cmd *tx_cmd;
short length;
@@ -871,7 +871,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
@@ -906,7 +906,7 @@
dev->stats.tx_packets++;
}
- return 0;
+ return NETDEV_TX_OK;
}
static void
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index dab4533..149e0ed 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -411,7 +411,7 @@
dev->trans_start = jiffies;
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* The typical workload of the driver:
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 5b5c253..fb65b42 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -620,6 +620,7 @@
dma_addr_t mapping;
unsigned int len, entry;
u32 ctrl;
+ unsigned long flags;
#ifdef DEBUG
int i;
@@ -635,12 +636,12 @@
#endif
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev_err(&bp->pdev->dev,
"BUG! Tx Ring full when queue awake!\n");
dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
@@ -674,11 +675,11 @@
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void macb_free_consistent(struct macb *bp)
@@ -1078,7 +1079,7 @@
strcpy(info->bus_info, dev_name(&bp->pdev->dev));
}
-static struct ethtool_ops macb_ethtool_ops = {
+static const struct ethtool_ops macb_ethtool_ops = {
.get_settings = macb_get_settings,
.set_settings = macb_set_settings,
.get_drvinfo = macb_get_drvinfo,
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index 1427755..7d7577b 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -581,7 +581,7 @@
netif_stop_queue(dev);
spin_unlock_irqrestore(&mp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static void mace_set_multicast(struct net_device *dev)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 99eed9f..3aabfd9 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -54,7 +54,7 @@
struct hlist_node *n;
hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[addr[5]], hlist) {
- if (!compare_ether_addr(vlan->dev->dev_addr, addr))
+ if (!compare_ether_addr_64bits(vlan->dev->dev_addr, addr))
return vlan;
}
return NULL;
@@ -92,7 +92,7 @@
* currently in use by the underlying device or
* another macvlan.
*/
- if (memcmp(port->dev->dev_addr, addr, ETH_ALEN) == 0)
+ if (!compare_ether_addr_64bits(port->dev->dev_addr, addr))
return 1;
if (macvlan_hash_lookup(port, addr))
@@ -130,7 +130,7 @@
dev->stats.multicast++;
nskb->dev = dev;
- if (!compare_ether_addr(eth->h_dest, dev->broadcast))
+ if (!compare_ether_addr_64bits(eth->h_dest, dev->broadcast))
nskb->pkt_type = PACKET_BROADCAST;
else
nskb->pkt_type = PACKET_MULTICAST;
@@ -184,8 +184,11 @@
return NULL;
}
-static int macvlan_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
+ int i = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
const struct macvlan_dev *vlan = netdev_priv(dev);
unsigned int len = skb->len;
int ret;
@@ -194,12 +197,11 @@
ret = dev_queue_xmit(skb);
if (likely(ret == NET_XMIT_SUCCESS)) {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += len;
- } else {
- dev->stats.tx_errors++;
- dev->stats.tx_aborted_errors++;
- }
+ txq->tx_packets++;
+ txq->tx_bytes += len;
+ } else
+ txq->tx_dropped++;
+
return NETDEV_TX_OK;
}
@@ -483,6 +485,25 @@
return 0;
}
+static int macvlan_get_tx_queues(struct net *net,
+ struct nlattr *tb[],
+ unsigned int *num_tx_queues,
+ unsigned int *real_num_tx_queues)
+{
+ struct net_device *real_dev;
+
+ if (!tb[IFLA_LINK])
+ return -EINVAL;
+
+ real_dev = __dev_get_by_index(net, nla_get_u32(tb[IFLA_LINK]));
+ if (!real_dev)
+ return -ENODEV;
+
+ *num_tx_queues = real_dev->num_tx_queues;
+ *real_num_tx_queues = real_dev->real_num_tx_queues;
+ return 0;
+}
+
static int macvlan_newlink(struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
@@ -549,6 +570,7 @@
static struct rtnl_link_ops macvlan_link_ops __read_mostly = {
.kind = "macvlan",
.priv_size = sizeof(struct macvlan_dev),
+ .get_tx_queues = macvlan_get_tx_queues,
.setup = macvlan_setup,
.validate = macvlan_validate,
.newlink = macvlan_newlink,
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index 6851bdb..21f8754 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -109,13 +109,20 @@
if (mmd_mask & (1 << devad)) {
mmd_mask &= ~(1 << devad);
- /* Read twice because link state is latched and a
- * read moves the current state into the register */
+ /* Reset the latched status and fault flags */
mdio->mdio_read(mdio->dev, mdio->prtad,
devad, MDIO_STAT1);
+ if (devad == MDIO_MMD_PMAPMD || devad == MDIO_MMD_PCS ||
+ devad == MDIO_MMD_PHYXS || devad == MDIO_MMD_DTEXS)
+ mdio->mdio_read(mdio->dev, mdio->prtad,
+ devad, MDIO_STAT2);
+
+ /* Check the current status and fault flags */
reg = mdio->mdio_read(mdio->dev, mdio->prtad,
devad, MDIO_STAT1);
- if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+ if (reg < 0 ||
+ (reg & (MDIO_STAT1_FAULT | MDIO_STAT1_LSTATUS)) !=
+ MDIO_STAT1_LSTATUS)
return false;
}
}
@@ -373,10 +380,7 @@
cmd = SIOCGMIIREG;
break;
case SIOCGMIIREG:
- break;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
break;
default:
return -EOPNOTSUPP;
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 5d04d94..92ceb68 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -715,7 +715,7 @@
spin_unlock_irqrestore(&priv->meth_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -784,7 +784,7 @@
/*
* The init function.
*/
-static int __init meth_probe(struct platform_device *pdev)
+static int __devinit meth_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct meth_private *priv;
diff --git a/drivers/net/mii.c b/drivers/net/mii.c
index d81a5d2..210b2b1 100644
--- a/drivers/net/mii.c
+++ b/drivers/net/mii.c
@@ -433,9 +433,6 @@
case SIOCSMIIREG: {
u16 val = mii_data->val_in;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
if (mii_data->phy_id == mii_if->phy_id) {
switch(mii_data->reg_num) {
case MII_BMCR: {
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index b3b9a14..8ea98bd 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -141,7 +141,7 @@
netif_stop_queue(dev);
mipsnet_put_todevice(dev, skb);
- return 0;
+ return NETDEV_TX_OK;
}
static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t len)
diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c
index ac57b6a..ccfe276 100644
--- a/drivers/net/mlx4/cq.c
+++ b/drivers/net/mlx4/cq.c
@@ -34,7 +34,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/mlx4/cmd.h>
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 9ed4a15..507e11f 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -218,8 +218,9 @@
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
mlx4_info(mdev, "Using %d tx rings for port:%d\n",
mdev->profile.prof[i].tx_ring_num, i);
- mdev->profile.prof[i].rx_ring_num =
- min_t(int, dev->caps.num_comp_vectors, MAX_RX_RINGS);
+ mdev->profile.prof[i].rx_ring_num = min_t(int,
+ roundup_pow_of_two(dev->caps.num_comp_vectors),
+ MAX_RX_RINGS);
mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n",
mdev->profile.prof[i].rx_ring_num, i);
}
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 93f4abd..c48b0f4b 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -414,6 +414,7 @@
unsigned long avg_pkt_size;
unsigned long rx_packets;
unsigned long rx_bytes;
+ unsigned long rx_byte_diff;
unsigned long tx_packets;
unsigned long tx_pkt_diff;
unsigned long rx_pkt_diff;
@@ -437,6 +438,8 @@
rx_pkt_diff = ((unsigned long) (rx_packets -
priv->last_moder_packets));
packets = max(tx_pkt_diff, rx_pkt_diff);
+ rx_byte_diff = rx_bytes - priv->last_moder_bytes;
+ rx_byte_diff = rx_byte_diff ? rx_byte_diff : 1;
rate = packets * HZ / period;
avg_pkt_size = packets ? ((unsigned long) (rx_bytes -
priv->last_moder_bytes)) / packets : 0;
@@ -447,10 +450,13 @@
/* If tx and rx packet rates are not balanced, assume that
* traffic is mainly BW bound and apply maximum moderation.
* Otherwise, moderate according to packet rate */
- if (2 * tx_pkt_diff > 3 * rx_pkt_diff ||
- 2 * rx_pkt_diff > 3 * tx_pkt_diff) {
+ if (2 * tx_pkt_diff > 3 * rx_pkt_diff &&
+ rx_pkt_diff / rx_byte_diff <
+ MLX4_EN_SMALL_PKT_SIZE)
+ moder_time = priv->rx_usecs_low;
+ else if (2 * rx_pkt_diff > 3 * tx_pkt_diff)
moder_time = priv->rx_usecs_high;
- } else {
+ else {
if (rate < priv->pkt_rate_low)
moder_time = priv->rx_usecs_low;
else if (rate > priv->pkt_rate_high)
@@ -616,8 +622,7 @@
/* Configure ring */
tx_ring = &priv->tx_ring[i];
- err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn,
- priv->rx_ring[0].srq.srqn);
+ err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn);
if (err) {
en_err(priv, "Failed allocating Tx ring\n");
mlx4_en_deactivate_cq(priv, cq);
@@ -1005,9 +1010,6 @@
if (err)
goto out;
- /* Populate Rx default RSS mappings */
- mlx4_en_set_default_rss_map(priv, &priv->rss_map, priv->rx_ring_num *
- RSS_FACTOR, priv->rx_ring_num);
/* Allocate page for receive rings */
err = mlx4_alloc_hwq_res(mdev->dev, &priv->res,
MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE);
diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c
index 65ca706..1625678 100644
--- a/drivers/net/mlx4/en_resources.c
+++ b/drivers/net/mlx4/en_resources.c
@@ -37,7 +37,7 @@
#include "mlx4_en.h"
void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
- int is_tx, int rss, int qpn, int cqn, int srqn,
+ int is_tx, int rss, int qpn, int cqn,
struct mlx4_qp_context *context)
{
struct mlx4_en_dev *mdev = priv->mdev;
@@ -46,11 +46,12 @@
context->flags = cpu_to_be32(7 << 16 | rss << 13);
context->pd = cpu_to_be32(mdev->priv_pdn);
context->mtu_msgmax = 0xff;
- context->rq_size_stride = 0;
+ if (!is_tx && !rss)
+ context->rq_size_stride = ilog2(size) << 3 | (ilog2(stride) - 4);
if (is_tx)
context->sq_size_stride = ilog2(size) << 3 | (ilog2(stride) - 4);
else
- context->sq_size_stride = 1;
+ context->sq_size_stride = ilog2(TXBB_SIZE) - 4;
context->usr_page = cpu_to_be32(mdev->priv_uar.index);
context->local_qpn = cpu_to_be32(qpn);
context->pri_path.ackto = 1 & 0x07;
@@ -59,8 +60,6 @@
context->cqn_send = cpu_to_be32(cqn);
context->cqn_recv = cpu_to_be32(cqn);
context->db_rec_addr = cpu_to_be64(priv->res.db.dma << 2);
- if (!rss)
- context->srqn = cpu_to_be32(MLX4_EN_USE_SRQ | srqn);
}
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 3ac0404..03b781a 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -40,16 +40,6 @@
#include "mlx4_en.h"
-static void *get_wqe(struct mlx4_en_rx_ring *ring, int n)
-{
- int offset = n << ring->srq.wqe_shift;
- return ring->buf + offset;
-}
-
-static void mlx4_en_srq_event(struct mlx4_srq *srq, enum mlx4_event type)
-{
- return;
-}
static int mlx4_en_get_frag_header(struct skb_frag_struct *frags, void **mac_hdr,
void **ip_hdr, void **tcpudp_hdr,
@@ -154,9 +144,6 @@
int possible_frags;
int i;
- /* Pre-link descriptor */
- rx_desc->next.next_wqe_index = cpu_to_be16((index + 1) & ring->size_mask);
-
/* Set size and memtype fields */
for (i = 0; i < priv->num_frags; i++) {
skb_frags[i].size = priv->frag_info[i].frag_size;
@@ -294,9 +281,6 @@
int err;
int tmp;
- /* Sanity check SRQ size before proceeding */
- if (size >= mdev->dev->caps.max_srq_wqes)
- return -EINVAL;
ring->prod = 0;
ring->cons = 0;
@@ -304,7 +288,7 @@
ring->size_mask = size - 1;
ring->stride = stride;
ring->log_stride = ffs(ring->stride) - 1;
- ring->buf_size = ring->size * ring->stride;
+ ring->buf_size = ring->size * ring->stride + TXBB_SIZE;
tmp = size * roundup_pow_of_two(MLX4_EN_MAX_RX_FRAGS *
sizeof(struct skb_frag_struct));
@@ -360,15 +344,12 @@
int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv)
{
- struct mlx4_en_dev *mdev = priv->mdev;
- struct mlx4_wqe_srq_next_seg *next;
struct mlx4_en_rx_ring *ring;
int i;
int ring_ind;
int err;
int stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) +
DS_SIZE * priv->num_frags);
- int max_gs = (stride - sizeof(struct mlx4_wqe_srq_next_seg)) / DS_SIZE;
for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) {
ring = &priv->rx_ring[ring_ind];
@@ -379,6 +360,9 @@
ring->cqn = priv->rx_cq[ring_ind].mcq.cqn;
ring->stride = stride;
+ if (ring->stride <= TXBB_SIZE)
+ ring->buf += TXBB_SIZE;
+
ring->log_stride = ffs(ring->stride) - 1;
ring->buf_size = ring->size * ring->stride;
@@ -405,37 +389,10 @@
ring = &priv->rx_ring[ring_ind];
mlx4_en_update_rx_prod_db(ring);
-
- /* Configure SRQ representing the ring */
- ring->srq.max = ring->actual_size;
- ring->srq.max_gs = max_gs;
- ring->srq.wqe_shift = ilog2(ring->stride);
-
- for (i = 0; i < ring->srq.max; ++i) {
- next = get_wqe(ring, i);
- next->next_wqe_index =
- cpu_to_be16((i + 1) & (ring->srq.max - 1));
- }
-
- err = mlx4_srq_alloc(mdev->dev, mdev->priv_pdn, &ring->wqres.mtt,
- ring->wqres.db.dma, &ring->srq);
- if (err){
- en_err(priv, "Failed to allocate srq\n");
- ring_ind--;
- goto err_srq;
- }
- ring->srq.event = mlx4_en_srq_event;
}
return 0;
-err_srq:
- while (ring_ind >= 0) {
- ring = &priv->rx_ring[ring_ind];
- mlx4_srq_free(mdev->dev, &ring->srq);
- ring_ind--;
- }
-
err_buffers:
for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++)
mlx4_en_free_rx_buf(priv, &priv->rx_ring[ring_ind]);
@@ -456,7 +413,7 @@
kfree(ring->lro.lro_arr);
mlx4_en_unmap_buffer(&ring->wqres.buf);
- mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
+ mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size + TXBB_SIZE);
vfree(ring->rx_info);
ring->rx_info = NULL;
}
@@ -464,10 +421,9 @@
void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_rx_ring *ring)
{
- struct mlx4_en_dev *mdev = priv->mdev;
-
- mlx4_srq_free(mdev->dev, &ring->srq);
mlx4_en_free_rx_buf(priv, ring);
+ if (ring->stride <= TXBB_SIZE)
+ ring->buf -= TXBB_SIZE;
mlx4_en_destroy_allocator(priv, ring);
}
@@ -836,25 +792,8 @@
/* RSS related functions */
-/* Calculate rss size and map each entry in rss table to rx ring */
-void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
- struct mlx4_en_rss_map *rss_map,
- int num_entries, int num_rings)
-{
- int i;
-
- rss_map->size = roundup_pow_of_two(num_entries);
- en_dbg(DRV, priv, "Setting default RSS map of %d entires\n",
- rss_map->size);
-
- for (i = 0; i < rss_map->size; i++) {
- rss_map->map[i] = i % num_rings;
- en_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]);
- }
-}
-
-static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
- int qpn, int srqn, int cqn,
+static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn,
+ struct mlx4_en_rx_ring *ring,
enum mlx4_qp_state *state,
struct mlx4_qp *qp)
{
@@ -876,13 +815,16 @@
qp->event = mlx4_en_sqp_event;
memset(context, 0, sizeof *context);
- mlx4_en_fill_qp_context(priv, 0, 0, 0, 0, qpn, cqn, srqn, context);
+ mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 0, 0,
+ qpn, ring->cqn, context);
+ context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma);
- err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, context, qp, state);
+ err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, context, qp, state);
if (err) {
mlx4_qp_remove(mdev->dev, qp);
mlx4_qp_free(mdev->dev, qp);
}
+ mlx4_en_update_rx_prod_db(ring);
out:
kfree(context);
return err;
@@ -898,23 +840,22 @@
void *ptr;
int rss_xor = mdev->profile.rss_xor;
u8 rss_mask = mdev->profile.rss_mask;
- int i, srqn, qpn, cqn;
+ int i, qpn;
int err = 0;
int good_qps = 0;
en_dbg(DRV, priv, "Configuring rss steering\n");
- err = mlx4_qp_reserve_range(mdev->dev, rss_map->size,
- rss_map->size, &rss_map->base_qpn);
+ err = mlx4_qp_reserve_range(mdev->dev, priv->rx_ring_num,
+ priv->rx_ring_num,
+ &rss_map->base_qpn);
if (err) {
- en_err(priv, "Failed reserving %d qps\n", rss_map->size);
+ en_err(priv, "Failed reserving %d qps\n", priv->rx_ring_num);
return err;
}
- for (i = 0; i < rss_map->size; i++) {
- cqn = priv->rx_ring[rss_map->map[i]].cqn;
- srqn = priv->rx_ring[rss_map->map[i]].srq.srqn;
+ for (i = 0; i < priv->rx_ring_num; i++) {
qpn = rss_map->base_qpn + i;
- err = mlx4_en_config_rss_qp(priv, qpn, srqn, cqn,
+ err = mlx4_en_config_rss_qp(priv, qpn, &priv->rx_ring[i],
&rss_map->state[i],
&rss_map->qps[i]);
if (err)
@@ -937,11 +878,11 @@
}
rss_map->indir_qp.event = mlx4_en_sqp_event;
mlx4_en_fill_qp_context(priv, 0, 0, 0, 1, priv->base_qpn,
- priv->rx_ring[0].cqn, 0, &context);
+ priv->rx_ring[0].cqn, &context);
ptr = ((void *) &context) + 0x3c;
rss_context = (struct mlx4_en_rss_context *) ptr;
- rss_context->base_qpn = cpu_to_be32(ilog2(rss_map->size) << 24 |
+ rss_context->base_qpn = cpu_to_be32(ilog2(priv->rx_ring_num) << 24 |
(rss_map->base_qpn));
rss_context->default_qpn = cpu_to_be32(rss_map->base_qpn);
rss_context->hash_fn = rss_xor & 0x3;
@@ -968,7 +909,7 @@
mlx4_qp_remove(mdev->dev, &rss_map->qps[i]);
mlx4_qp_free(mdev->dev, &rss_map->qps[i]);
}
- mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size);
+ mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, priv->rx_ring_num);
return err;
}
@@ -984,13 +925,13 @@
mlx4_qp_free(mdev->dev, &rss_map->indir_qp);
mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1);
- for (i = 0; i < rss_map->size; i++) {
+ for (i = 0; i < priv->rx_ring_num; i++) {
mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i],
MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]);
mlx4_qp_remove(mdev->dev, &rss_map->qps[i]);
mlx4_qp_free(mdev->dev, &rss_map->qps[i]);
}
- mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size);
+ mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, priv->rx_ring_num);
}
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 5a88b3f5..8c72799 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -150,7 +150,7 @@
int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
- int cq, int srqn)
+ int cq)
{
struct mlx4_en_dev *mdev = priv->mdev;
int err;
@@ -168,7 +168,7 @@
ring->doorbell_qpn = swab32(ring->qp.qpn << 8);
mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
- ring->cqn, srqn, &ring->context);
+ ring->cqn, &ring->context);
err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, &ring->context,
&ring->qp, &ring->qp_state);
@@ -437,6 +437,7 @@
{
struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind];
struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind];
+ unsigned long flags;
/* If we don't have a pending timer, set one up to catch our recent
post in case the interface becomes idle */
@@ -445,9 +446,9 @@
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock_irq(&ring->comp_lock)) {
+ if (spin_trylock_irqsave(&ring->comp_lock, flags)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock_irq(&ring->comp_lock);
+ spin_unlock_irqrestore(&ring->comp_lock, flags);
}
}
@@ -588,7 +589,7 @@
return skb_tx_hash(dev, skb);
}
-int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
@@ -765,7 +766,7 @@
/* Poll CQ here */
mlx4_en_xmit_poll(priv, tx_ind);
- return 0;
+ return NETDEV_TX_OK;
tx_drop:
dev_kfree_skb_any(skb);
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index b9ceddd..bffb799 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -31,7 +31,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
@@ -42,6 +41,10 @@
#include "fw.h"
enum {
+ MLX4_IRQNAME_SIZE = 64
+};
+
+enum {
MLX4_NUM_ASYNC_EQE = 0x100,
MLX4_NUM_SPARE_EQE = 0x80,
MLX4_EQ_ENTRY_SIZE = 0x20
@@ -526,48 +529,6 @@
iounmap(priv->clr_base);
}
-int mlx4_map_eq_icm(struct mlx4_dev *dev, u64 icm_virt)
-{
- struct mlx4_priv *priv = mlx4_priv(dev);
- int ret;
-
- /*
- * We assume that mapping one page is enough for the whole EQ
- * context table. This is fine with all current HCAs, because
- * we only use 32 EQs and each EQ uses 64 bytes of context
- * memory, or 1 KB total.
- */
- priv->eq_table.icm_virt = icm_virt;
- priv->eq_table.icm_page = alloc_page(GFP_HIGHUSER);
- if (!priv->eq_table.icm_page)
- return -ENOMEM;
- priv->eq_table.icm_dma = pci_map_page(dev->pdev, priv->eq_table.icm_page, 0,
- PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(dev->pdev, priv->eq_table.icm_dma)) {
- __free_page(priv->eq_table.icm_page);
- return -ENOMEM;
- }
-
- ret = mlx4_MAP_ICM_page(dev, priv->eq_table.icm_dma, icm_virt);
- if (ret) {
- pci_unmap_page(dev->pdev, priv->eq_table.icm_dma, PAGE_SIZE,
- PCI_DMA_BIDIRECTIONAL);
- __free_page(priv->eq_table.icm_page);
- }
-
- return ret;
-}
-
-void mlx4_unmap_eq_icm(struct mlx4_dev *dev)
-{
- struct mlx4_priv *priv = mlx4_priv(dev);
-
- mlx4_UNMAP_ICM(dev, priv->eq_table.icm_virt, 1);
- pci_unmap_page(dev->pdev, priv->eq_table.icm_dma, PAGE_SIZE,
- PCI_DMA_BIDIRECTIONAL);
- __free_page(priv->eq_table.icm_page);
-}
-
int mlx4_alloc_eq_table(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -615,7 +576,9 @@
priv->eq_table.clr_int = priv->clr_base +
(priv->eq_table.inta_pin < 32 ? 4 : 0);
- priv->eq_table.irq_names = kmalloc(16 * dev->caps.num_comp_vectors, GFP_KERNEL);
+ priv->eq_table.irq_names =
+ kmalloc(MLX4_IRQNAME_SIZE * (dev->caps.num_comp_vectors + 1),
+ GFP_KERNEL);
if (!priv->eq_table.irq_names) {
err = -ENOMEM;
goto err_out_bitmap;
@@ -638,17 +601,25 @@
goto err_out_comp;
if (dev->flags & MLX4_FLAG_MSI_X) {
- static const char async_eq_name[] = "mlx4-async";
const char *eq_name;
for (i = 0; i < dev->caps.num_comp_vectors + 1; ++i) {
if (i < dev->caps.num_comp_vectors) {
- snprintf(priv->eq_table.irq_names + i * 16, 16,
- "mlx4-comp-%d", i);
- eq_name = priv->eq_table.irq_names + i * 16;
- } else
- eq_name = async_eq_name;
+ snprintf(priv->eq_table.irq_names +
+ i * MLX4_IRQNAME_SIZE,
+ MLX4_IRQNAME_SIZE,
+ "mlx4-comp-%d@pci:%s", i,
+ pci_name(dev->pdev));
+ } else {
+ snprintf(priv->eq_table.irq_names +
+ i * MLX4_IRQNAME_SIZE,
+ MLX4_IRQNAME_SIZE,
+ "mlx4-async@pci:%s",
+ pci_name(dev->pdev));
+ }
+ eq_name = priv->eq_table.irq_names +
+ i * MLX4_IRQNAME_SIZE;
err = request_irq(priv->eq_table.eq[i].irq,
mlx4_msi_x_interrupt, 0, eq_name,
priv->eq_table.eq + i);
@@ -658,8 +629,12 @@
priv->eq_table.eq[i].have_irq = 1;
}
} else {
+ snprintf(priv->eq_table.irq_names,
+ MLX4_IRQNAME_SIZE,
+ DRV_NAME "@pci:%s",
+ pci_name(dev->pdev));
err = request_irq(dev->pdev->irq, mlx4_interrupt,
- IRQF_SHARED, DRV_NAME, dev);
+ IRQF_SHARED, priv->eq_table.irq_names, dev);
if (err)
goto err_out_async;
diff --git a/drivers/net/mlx4/icm.c b/drivers/net/mlx4/icm.c
index baf4bf6..04b382f 100644
--- a/drivers/net/mlx4/icm.c
+++ b/drivers/net/mlx4/icm.c
@@ -31,7 +31,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/scatterlist.h>
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index dac621b..3dd481e 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -525,7 +525,10 @@
goto err_unmap_aux;
}
- err = mlx4_map_eq_icm(dev, init_hca->eqc_base);
+ err = mlx4_init_icm_table(dev, &priv->eq_table.table,
+ init_hca->eqc_base, dev_cap->eqc_entry_sz,
+ dev->caps.num_eqs, dev->caps.num_eqs,
+ 0, 0);
if (err) {
mlx4_err(dev, "Failed to map EQ context memory, aborting.\n");
goto err_unmap_cmpt;
@@ -668,7 +671,7 @@
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
err_unmap_eq:
- mlx4_unmap_eq_icm(dev);
+ mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
err_unmap_cmpt:
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
@@ -698,11 +701,11 @@
mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table);
mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table);
+ mlx4_cleanup_icm_table(dev, &priv->eq_table.table);
mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table);
mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table);
- mlx4_unmap_eq_icm(dev);
mlx4_UNMAP_ICM_AUX(dev);
mlx4_free_icm(dev, priv->fw.aux_icm, 0);
@@ -786,7 +789,7 @@
return 0;
err_close:
- mlx4_close_hca(dev);
+ mlx4_CLOSE_HCA(dev, 0);
err_free_icm:
mlx4_free_icms(dev);
@@ -1070,18 +1073,12 @@
goto err_disable_pdev;
}
- err = pci_request_region(pdev, 0, DRV_NAME);
+ err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- dev_err(&pdev->dev, "Cannot request control region, aborting.\n");
+ dev_err(&pdev->dev, "Couldn't get PCI resources, aborting\n");
goto err_disable_pdev;
}
- err = pci_request_region(pdev, 2, DRV_NAME);
- if (err) {
- dev_err(&pdev->dev, "Cannot request UAR region, aborting.\n");
- goto err_release_bar0;
- }
-
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
@@ -1090,7 +1087,7 @@
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting.\n");
- goto err_release_bar2;
+ goto err_release_regions;
}
}
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
@@ -1101,7 +1098,7 @@
if (err) {
dev_err(&pdev->dev, "Can't set consistent PCI DMA mask, "
"aborting.\n");
- goto err_release_bar2;
+ goto err_release_regions;
}
}
@@ -1110,7 +1107,7 @@
dev_err(&pdev->dev, "Device struct alloc failed, "
"aborting.\n");
err = -ENOMEM;
- goto err_release_bar2;
+ goto err_release_regions;
}
dev = &priv->dev;
@@ -1205,11 +1202,8 @@
err_free_dev:
kfree(priv);
-err_release_bar2:
- pci_release_region(pdev, 2);
-
-err_release_bar0:
- pci_release_region(pdev, 0);
+err_release_regions:
+ pci_release_regions(pdev);
err_disable_pdev:
pci_disable_device(pdev);
@@ -1265,8 +1259,7 @@
pci_disable_msix(pdev);
kfree(priv);
- pci_release_region(pdev, 2);
- pci_release_region(pdev, 0);
+ pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index 6053c35..5ccbce9 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -31,7 +31,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 5bd79c2..bc72d6e 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -205,9 +205,7 @@
void __iomem **uar_map;
u32 clr_mask;
struct mlx4_eq *eq;
- u64 icm_virt;
- struct page *icm_page;
- dma_addr_t icm_dma;
+ struct mlx4_icm_table table;
struct mlx4_icm_table cmpt_table;
int have_irq;
u8 inta_pin;
@@ -373,9 +371,6 @@
struct mlx4_dev_cap *dev_cap,
struct mlx4_init_hca_param *init_hca);
-int mlx4_map_eq_icm(struct mlx4_dev *dev, u64 icm_virt);
-void mlx4_unmap_eq_icm(struct mlx4_dev *dev);
-
int mlx4_cmd_init(struct mlx4_dev *dev);
void mlx4_cmd_cleanup(struct mlx4_dev *dev);
void mlx4_cmd_event(struct mlx4_dev *dev, u16 token, u8 status, u64 out_param);
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index c7c5e86..4376147b 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -95,8 +95,6 @@
#define MLX4_EN_PAGE_SIZE (1 << MLX4_EN_PAGE_SHIFT)
#define MAX_TX_RINGS 16
#define MAX_RX_RINGS 16
-#define MAX_RSS_MAP_SIZE 64
-#define RSS_FACTOR 2
#define TXBB_SIZE 64
#define HEADROOM (2048 / TXBB_SIZE + 1)
#define STAMP_STRIDE 64
@@ -276,13 +274,11 @@
};
struct mlx4_en_rx_desc {
- struct mlx4_wqe_srq_next_seg next;
/* actual number of entries depends on rx ring stride */
struct mlx4_wqe_data_seg data[0];
};
struct mlx4_en_rx_ring {
- struct mlx4_srq srq;
struct mlx4_hwq_resources wqres;
struct mlx4_en_rx_alloc page_alloc[MLX4_EN_MAX_RX_FRAGS];
struct net_lro_mgr lro;
@@ -377,11 +373,9 @@
struct mlx4_en_rss_map {
- int size;
int base_qpn;
- u16 map[MAX_RSS_MAP_SIZE];
- struct mlx4_qp qps[MAX_RSS_MAP_SIZE];
- enum mlx4_qp_state state[MAX_RSS_MAP_SIZE];
+ struct mlx4_qp qps[MAX_RX_RINGS];
+ enum mlx4_qp_state state[MAX_RX_RINGS];
struct mlx4_qp indir_qp;
enum mlx4_qp_state indir_state;
};
@@ -524,14 +518,14 @@
void mlx4_en_poll_tx_cq(unsigned long data);
void mlx4_en_tx_irq(struct mlx4_cq *mcq);
u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb);
-int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev);
int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring,
u32 size, u16 stride);
void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring);
int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
- int cq, int srqn);
+ int cq);
void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring);
@@ -548,16 +542,13 @@
int budget);
int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget);
void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
- int is_tx, int rss, int qpn, int cqn, int srqn,
+ int is_tx, int rss, int qpn, int cqn,
struct mlx4_qp_context *context);
void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event);
int mlx4_en_map_buffer(struct mlx4_buf *buf);
void mlx4_en_unmap_buffer(struct mlx4_buf *buf);
void mlx4_en_calc_rx_buf(struct net_device *dev);
-void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv,
- struct mlx4_en_rss_map *rss_map,
- int num_entries, int num_rings);
int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv);
void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv);
int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring);
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index f96948b..ca7ab8e 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -32,7 +32,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/mlx4/cmd.h>
diff --git a/drivers/net/mlx4/pd.c b/drivers/net/mlx4/pd.c
index 26d1a7a..c4988d6 100644
--- a/drivers/net/mlx4/pd.c
+++ b/drivers/net/mlx4/pd.c
@@ -31,7 +31,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <asm/page.h>
diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c
index bd22df9..ca25b9d 100644
--- a/drivers/net/mlx4/profile.c
+++ b/drivers/net/mlx4/profile.c
@@ -32,8 +32,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
-
#include "mlx4.h"
#include "fw.h"
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c
index 1c565ef..42ab9fc 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/mlx4/qp.c
@@ -33,8 +33,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
-
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
diff --git a/drivers/net/mlx4/reset.c b/drivers/net/mlx4/reset.c
index 3951b88..e5741da 100644
--- a/drivers/net/mlx4/reset.c
+++ b/drivers/net/mlx4/reset.c
@@ -31,7 +31,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/delay.h>
diff --git a/drivers/net/mlx4/srq.c b/drivers/net/mlx4/srq.c
index fe9f218..1377d0d 100644
--- a/drivers/net/mlx4/srq.c
+++ b/drivers/net/mlx4/srq.c
@@ -31,8 +31,6 @@
* SOFTWARE.
*/
-#include <linux/init.h>
-
#include <linux/mlx4/cmd.h>
#include "mlx4.h"
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 0f32db3..b62e61d 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1066,40 +1066,6 @@
}
}
-static void txq_set_wrr(struct tx_queue *txq, int weight)
-{
- struct mv643xx_eth_private *mp = txq_to_mp(txq);
- int off;
- u32 val;
-
- /*
- * Turn off fixed priority mode.
- */
- off = 0;
- switch (mp->shared->tx_bw_control) {
- case TX_BW_CONTROL_OLD_LAYOUT:
- off = TXQ_FIX_PRIO_CONF;
- break;
- case TX_BW_CONTROL_NEW_LAYOUT:
- off = TXQ_FIX_PRIO_CONF_MOVED;
- break;
- }
-
- if (off) {
- val = rdlp(mp, off);
- val &= ~(1 << txq->index);
- wrlp(mp, off, val);
-
- /*
- * Configure WRR weight for this queue.
- */
-
- val = rdlp(mp, off);
- val = (val & ~0xff) | (weight & 0xff);
- wrlp(mp, TXQ_BW_WRR_CONF(txq->index), val);
- }
-}
-
/* mii management interface *************************************************/
static irqreturn_t mv643xx_eth_err_irq(int irq, void *dev_id)
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 1f6e36e..6930c87 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.5.0-1.418"
+#define MYRI10GE_VERSION_STR "1.5.0-1.432"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -188,6 +188,7 @@
dma_addr_t fw_stats_bus;
int watchdog_tx_done;
int watchdog_tx_req;
+ int watchdog_rx_done;
#ifdef CONFIG_MYRI10GE_DCA
int cached_dca_tag;
int cpu;
@@ -256,6 +257,7 @@
u32 link_changes;
u32 msg_enable;
unsigned int board_number;
+ int rebooted;
};
static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
@@ -358,7 +360,8 @@
#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
static void myri10ge_set_multicast_list(struct net_device *dev);
-static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
+ struct net_device *dev);
static inline void put_be32(__be32 val, __be32 __iomem * p)
{
@@ -2552,17 +2555,22 @@
netif_carrier_off(dev);
netif_tx_stop_all_queues(dev);
- old_down_cnt = mgp->down_cnt;
- mb();
- status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
- if (status)
- printk(KERN_ERR "myri10ge: %s: Couldn't bring down link\n",
- dev->name);
+ if (mgp->rebooted == 0) {
+ old_down_cnt = mgp->down_cnt;
+ mb();
+ status =
+ myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
+ if (status)
+ printk(KERN_ERR
+ "myri10ge: %s: Couldn't bring down link\n",
+ dev->name);
- wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt, HZ);
- if (old_down_cnt == mgp->down_cnt)
- printk(KERN_ERR "myri10ge: %s never got down irq\n", dev->name);
-
+ wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
+ HZ);
+ if (old_down_cnt == mgp->down_cnt)
+ printk(KERN_ERR "myri10ge: %s never got down irq\n",
+ dev->name);
+ }
netif_tx_disable(dev);
myri10ge_free_irq(mgp);
for (i = 0; i < mgp->num_slices; i++)
@@ -2649,7 +2657,8 @@
* it and try again.
*/
-static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_slice_state *ss;
@@ -2748,7 +2757,7 @@
/* The packet is gone, so we must
* return 0 */
ss->stats.tx_dropped += 1;
- return 0;
+ return NETDEV_TX_OK;
}
/* adjust the len to account for the zero pad
* so that the nic can know how long it is */
@@ -2892,7 +2901,7 @@
tx->stop_queue++;
netif_tx_stop_queue(netdev_queue);
}
- return 0;
+ return NETDEV_TX_OK;
abort_linearize:
/* Free any DMA resources we've alloced and clear out the skb
@@ -2936,16 +2945,17 @@
drop:
dev_kfree_skb_any(skb);
ss->stats.tx_dropped += 1;
- return 0;
+ return NETDEV_TX_OK;
}
-static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
+ struct net_device *dev)
{
struct sk_buff *segs, *curr;
struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_slice_state *ss;
- int status;
+ netdev_tx_t status;
segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
if (IS_ERR(segs))
@@ -2968,13 +2978,13 @@
}
}
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
drop:
ss = &mgp->ss[skb_get_queue_mapping(skb)];
dev_kfree_skb_any(skb);
ss->stats.tx_dropped += 1;
- return 0;
+ return NETDEV_TX_OK;
}
static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
@@ -3427,12 +3437,13 @@
container_of(work, struct myri10ge_priv, watchdog_work);
struct myri10ge_tx_buf *tx;
u32 reboot;
- int status;
+ int status, rebooted;
int i;
u16 cmd, vendor;
mgp->watchdog_resets++;
pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
+ rebooted = 0;
if ((cmd & PCI_COMMAND_MASTER) == 0) {
/* Bus master DMA disabled? Check to see
* if the card rebooted due to a parity error
@@ -3444,9 +3455,12 @@
myri10ge_reset_recover ? " " : " not");
if (myri10ge_reset_recover == 0)
return;
-
+ rtnl_lock();
+ mgp->rebooted = 1;
+ rebooted = 1;
+ myri10ge_close(mgp->dev);
myri10ge_reset_recover--;
-
+ mgp->rebooted = 0;
/*
* A rebooted nic will come back with config space as
* it was after power was applied to PCIe bus.
@@ -3494,8 +3508,10 @@
}
}
- rtnl_lock();
- myri10ge_close(mgp->dev);
+ if (!rebooted) {
+ rtnl_lock();
+ myri10ge_close(mgp->dev);
+ }
status = myri10ge_load_firmware(mgp, 1);
if (status != 0)
printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
@@ -3516,12 +3532,14 @@
{
struct myri10ge_priv *mgp;
struct myri10ge_slice_state *ss;
- int i, reset_needed;
+ int i, reset_needed, busy_slice_cnt;
u32 rx_pause_cnt;
+ u16 cmd;
mgp = (struct myri10ge_priv *)arg;
rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
+ busy_slice_cnt = 0;
for (i = 0, reset_needed = 0;
i < mgp->num_slices && reset_needed == 0; ++i) {
@@ -3559,8 +3577,22 @@
reset_needed = 1;
}
}
+ if (ss->watchdog_tx_done != ss->tx.done ||
+ ss->watchdog_rx_done != ss->rx_done.cnt) {
+ busy_slice_cnt++;
+ }
ss->watchdog_tx_done = ss->tx.done;
ss->watchdog_tx_req = ss->tx.req;
+ ss->watchdog_rx_done = ss->rx_done.cnt;
+ }
+ /* if we've sent or received no traffic, poll the NIC to
+ * ensure it is still there. Otherwise, we risk not noticing
+ * an error in a timely fashion */
+ if (busy_slice_cnt == 0) {
+ pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
+ if ((cmd & PCI_COMMAND_MASTER) == 0) {
+ reset_needed = 1;
+ }
}
mgp->watchdog_pause = rx_pause_cnt;
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 5f0758b..29ebebc 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -692,7 +692,7 @@
DTX(("tbusy=0, returning 0\n"));
netif_start_queue(dev);
spin_unlock_irqrestore(&mp->irq_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* Create the MyriNet MAC header for an arbitrary protocol layer
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 78c0883..b2722c4 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -621,7 +621,7 @@
static void free_ring(struct net_device *dev);
static void reinit_ring(struct net_device *dev);
static void init_registers(struct net_device *dev);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
static int natsemi_poll(struct napi_struct *napi, int budget);
@@ -2079,7 +2079,7 @@
reinit_rx(dev);
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
@@ -2125,7 +2125,7 @@
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
dev->name, np->cur_tx, entry);
}
- return 0;
+ return NETDEV_TX_OK;
}
static void netdev_tx_done(struct net_device *dev)
@@ -3053,12 +3053,10 @@
switch(cmd) {
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- case SIOCDEVPRIVATE: /* for binary compat, remove in 2.5 */
data->phy_id = np->phy_addr_external;
/* Fall Through */
case SIOCGMIIREG: /* Read MII PHY register. */
- case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
/* The phy_id is not enough to uniquely identify
* the intended target. Therefore the command is sent to
* the given mii on the current port.
@@ -3077,9 +3075,6 @@
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
if (dev->if_port == PORT_TP) {
if ((data->phy_id & 0x1f) == np->phy_addr_external) {
if ((data->reg_num & 0x1f) == MII_ADVERTISE)
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index 946366d..9f42354 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -134,7 +134,7 @@
spin_unlock_irq(&priv->lock);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void netx_eth_receive(struct net_device *ndev)
diff --git a/drivers/net/netxen/Makefile b/drivers/net/netxen/Makefile
index cf01a91..11d94e2 100644
--- a/drivers/net/netxen/Makefile
+++ b/drivers/net/netxen/Makefile
@@ -1,4 +1,5 @@
# Copyright (C) 2003 - 2009 NetXen, Inc.
+# Copyright (C) 2009 - QLogic Corporation.
# All rights reserved.
#
# This program is free software; you can redistribute it and/or
@@ -19,16 +20,10 @@
# The full GNU General Public License is included in this distribution
# in the file called LICENSE.
#
-# Contact Information:
-# info@netxen.com
-# NetXen Inc,
-# 18922 Forge Drive
-# Cupertino, CA 95014-0701
-#
#
obj-$(CONFIG_NETXEN_NIC) := netxen_nic.o
netxen_nic-y := netxen_nic_hw.o netxen_nic_main.o netxen_nic_init.o \
- netxen_nic_ethtool.o netxen_nic_niu.o netxen_nic_ctx.o
+ netxen_nic_ethtool.o netxen_nic_ctx.o
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index a9c1fcc..7384f59 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,12 +21,6 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#ifndef _NETXEN_NIC_H_
@@ -53,12 +48,13 @@
#include <asm/io.h>
#include <asm/byteorder.h>
+#include "netxen_nic_hdr.h"
#include "netxen_nic_hw.h"
#define _NETXEN_NIC_LINUX_MAJOR 4
#define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 30
-#define NETXEN_NIC_LINUX_VERSIONID "4.0.30"
+#define _NETXEN_NIC_LINUX_SUBVERSION 50
+#define NETXEN_NIC_LINUX_VERSIONID "4.0.50"
#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
#define _major(v) (((v) >> 24) & 0xff)
@@ -143,18 +139,14 @@
#define NX_ETHERMTU 1500
#define NX_MAX_ETHERHDR 32 /* This contains some padding */
-#define NX_RX_NORMAL_BUF_MAX_LEN (NX_MAX_ETHERHDR + NX_ETHERMTU)
+#define NX_P2_RX_BUF_MAX_LEN 1760
+#define NX_P3_RX_BUF_MAX_LEN (NX_MAX_ETHERHDR + NX_ETHERMTU)
#define NX_P2_RX_JUMBO_BUF_MAX_LEN (NX_MAX_ETHERHDR + P2_MAX_MTU)
#define NX_P3_RX_JUMBO_BUF_MAX_LEN (NX_MAX_ETHERHDR + P3_MAX_MTU)
#define NX_CT_DEFAULT_RX_BUF_LEN 2048
+#define NX_LRO_BUFFER_EXTRA 2048
-#define MAX_RX_BUFFER_LENGTH 1760
-#define MAX_RX_JUMBO_BUFFER_LENGTH 8062
-#define MAX_RX_LRO_BUFFER_LENGTH (8062)
-#define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2)
-#define RX_JUMBO_DMA_MAP_LEN \
- (MAX_RX_JUMBO_BUFFER_LENGTH - 2)
-#define RX_LRO_DMA_MAP_LEN (MAX_RX_LRO_BUFFER_LENGTH - 2)
+#define NX_RX_LRO_BUFFER_LENGTH (8060)
/*
* Maximum number of ring contexts
@@ -181,6 +173,7 @@
#define MAX_BUFFERS_PER_CMD 32
#define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + 4)
+#define NX_MAX_TX_TIMEOUTS 2
/*
* Following are the states of the Phantom. Phantom will set them and
@@ -200,13 +193,20 @@
#define RCV_RING_JUMBO 1
#define RCV_RING_LRO 2
-#define MAX_CMD_DESCRIPTORS 4096
-#define MAX_RCV_DESCRIPTORS 16384
-#define MAX_CMD_DESCRIPTORS_HOST 1024
-#define MAX_RCV_DESCRIPTORS_1G 2048
-#define MAX_RCV_DESCRIPTORS_10G 4096
-#define MAX_JUMBO_RCV_DESCRIPTORS 1024
+#define MIN_CMD_DESCRIPTORS 64
+#define MIN_RCV_DESCRIPTORS 64
+#define MIN_JUMBO_DESCRIPTORS 32
+
+#define MAX_CMD_DESCRIPTORS 1024
+#define MAX_RCV_DESCRIPTORS_1G 4096
+#define MAX_RCV_DESCRIPTORS_10G 8192
+#define MAX_JUMBO_RCV_DESCRIPTORS_1G 512
+#define MAX_JUMBO_RCV_DESCRIPTORS_10G 1024
#define MAX_LRO_RCV_DESCRIPTORS 8
+
+#define DEFAULT_RCV_DESCRIPTORS_1G 2048
+#define DEFAULT_RCV_DESCRIPTORS_10G 4096
+
#define NETXEN_CTX_SIGNATURE 0xdee0
#define NETXEN_CTX_SIGNATURE_V2 0x0002dee0
#define NETXEN_CTX_RESET 0xbad0
@@ -225,7 +225,7 @@
#define MPORT_SINGLE_FUNCTION_MODE 0x1111
#define MPORT_MULTI_FUNCTION_MODE 0x2222
-#include "netxen_nic_phan_reg.h"
+#define NX_MAX_PCI_FUNC 8
/*
* NetXen host-peg signal message structure
@@ -302,6 +302,10 @@
#define FLAGS_IPSEC_SA_ADD 0x04
#define FLAGS_IPSEC_SA_DELETE 0x08
#define FLAGS_VLAN_TAGGED 0x10
+#define FLAGS_VLAN_OOB 0x40
+
+#define netxen_set_tx_vlan_tci(cmd_desc, v) \
+ (cmd_desc)->vlan_TCI = cpu_to_le16(v);
#define netxen_set_cmd_desc_port(cmd_desc, var) \
((cmd_desc)->port_ctxid |= ((var) & 0x0F))
@@ -316,58 +320,33 @@
cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
#define netxen_set_tx_frags_len(_desc, _frags, _len) \
- (_desc)->num_of_buffers_total_length = \
+ (_desc)->nfrags__length = \
cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
struct cmd_desc_type0 {
u8 tcp_hdr_offset; /* For LSO only */
u8 ip_hdr_offset; /* For LSO only */
- /* Bit pattern: 0-6 flags, 7-12 opcode, 13-15 unused */
- __le16 flags_opcode;
- /* Bit pattern: 0-7 total number of segments,
- 8-31 Total size of the packet */
- __le32 num_of_buffers_total_length;
- union {
- struct {
- __le32 addr_low_part2;
- __le32 addr_high_part2;
- };
- __le64 addr_buffer2;
- };
+ __le16 flags_opcode; /* 15:13 unused, 12:7 opcode, 6:0 flags */
+ __le32 nfrags__length; /* 31:8 total len, 7:0 frag count */
- __le16 reference_handle; /* changed to u16 to add mss */
- __le16 mss; /* passed by NDIS_PACKET for LSO */
- /* Bit pattern 0-3 port, 0-3 ctx id */
- u8 port_ctxid;
+ __le64 addr_buffer2;
+
+ __le16 reference_handle;
+ __le16 mss;
+ u8 port_ctxid; /* 7:4 ctxid 3:0 port */
u8 total_hdr_length; /* LSO only : MAC+IP+TCP Hdr size */
__le16 conn_id; /* IPSec offoad only */
- union {
- struct {
- __le32 addr_low_part3;
- __le32 addr_high_part3;
- };
- __le64 addr_buffer3;
- };
- union {
- struct {
- __le32 addr_low_part1;
- __le32 addr_high_part1;
- };
- __le64 addr_buffer1;
- };
+ __le64 addr_buffer3;
+ __le64 addr_buffer1;
__le16 buffer_length[4];
- union {
- struct {
- __le32 addr_low_part4;
- __le32 addr_high_part4;
- };
- __le64 addr_buffer4;
- };
+ __le64 addr_buffer4;
- __le64 unused;
+ __le32 reserved2;
+ __le16 reserved;
+ __le16 vlan_TCI;
} __attribute__ ((aligned(64)));
@@ -380,9 +359,11 @@
};
/* opcode field in status_desc */
+#define NETXEN_NIC_SYN_OFFLOAD 0x03
#define NETXEN_NIC_RXPKT_DESC 0x04
#define NETXEN_OLD_RXPKT_DESC 0x3f
#define NETXEN_NIC_RESPONSE_DESC 0x05
+#define NETXEN_NIC_LRO_DESC 0x12
/* for status field in status_desc */
#define STATUS_NEED_CKSUM (1)
@@ -416,6 +397,24 @@
#define netxen_get_sts_opcode(sts_data) \
(((sts_data) >> 58) & 0x03F)
+#define netxen_get_lro_sts_refhandle(sts_data) \
+ ((sts_data) & 0x0FFFF)
+#define netxen_get_lro_sts_length(sts_data) \
+ (((sts_data) >> 16) & 0x0FFFF)
+#define netxen_get_lro_sts_l2_hdr_offset(sts_data) \
+ (((sts_data) >> 32) & 0x0FF)
+#define netxen_get_lro_sts_l4_hdr_offset(sts_data) \
+ (((sts_data) >> 40) & 0x0FF)
+#define netxen_get_lro_sts_timestamp(sts_data) \
+ (((sts_data) >> 48) & 0x1)
+#define netxen_get_lro_sts_type(sts_data) \
+ (((sts_data) >> 49) & 0x7)
+#define netxen_get_lro_sts_push_flag(sts_data) \
+ (((sts_data) >> 52) & 0x1)
+#define netxen_get_lro_sts_seq_number(sts_data) \
+ ((sts_data) & 0x0FFFFFFFF)
+
+
struct status_desc {
__le64 status_desc_data[2];
} __attribute__ ((aligned(16)));
@@ -459,154 +458,6 @@
#define NETXEN_BRDTYPE_P3_10G_XFP 0x0032
#define NETXEN_BRDTYPE_P3_10G_TP 0x0080
-struct netxen_board_info {
- u32 header_version;
-
- u32 board_mfg;
- u32 board_type;
- u32 board_num;
- u32 chip_id;
- u32 chip_minor;
- u32 chip_major;
- u32 chip_pkg;
- u32 chip_lot;
-
- u32 port_mask; /* available niu ports */
- u32 peg_mask; /* available pegs */
- u32 icache_ok; /* can we run with icache? */
- u32 dcache_ok; /* can we run with dcache? */
- u32 casper_ok;
-
- u32 mac_addr_lo_0;
- u32 mac_addr_lo_1;
- u32 mac_addr_lo_2;
- u32 mac_addr_lo_3;
-
- /* MN-related config */
- u32 mn_sync_mode; /* enable/ sync shift cclk/ sync shift mclk */
- u32 mn_sync_shift_cclk;
- u32 mn_sync_shift_mclk;
- u32 mn_wb_en;
- u32 mn_crystal_freq; /* in MHz */
- u32 mn_speed; /* in MHz */
- u32 mn_org;
- u32 mn_depth;
- u32 mn_ranks_0; /* ranks per slot */
- u32 mn_ranks_1; /* ranks per slot */
- u32 mn_rd_latency_0;
- u32 mn_rd_latency_1;
- u32 mn_rd_latency_2;
- u32 mn_rd_latency_3;
- u32 mn_rd_latency_4;
- u32 mn_rd_latency_5;
- u32 mn_rd_latency_6;
- u32 mn_rd_latency_7;
- u32 mn_rd_latency_8;
- u32 mn_dll_val[18];
- u32 mn_mode_reg; /* MIU DDR Mode Register */
- u32 mn_ext_mode_reg; /* MIU DDR Extended Mode Register */
- u32 mn_timing_0; /* MIU Memory Control Timing Rgister */
- u32 mn_timing_1; /* MIU Extended Memory Ctrl Timing Register */
- u32 mn_timing_2; /* MIU Extended Memory Ctrl Timing2 Register */
-
- /* SN-related config */
- u32 sn_sync_mode; /* enable/ sync shift cclk / sync shift mclk */
- u32 sn_pt_mode; /* pass through mode */
- u32 sn_ecc_en;
- u32 sn_wb_en;
- u32 sn_crystal_freq;
- u32 sn_speed;
- u32 sn_org;
- u32 sn_depth;
- u32 sn_dll_tap;
- u32 sn_rd_latency;
-
- u32 mac_addr_hi_0;
- u32 mac_addr_hi_1;
- u32 mac_addr_hi_2;
- u32 mac_addr_hi_3;
-
- u32 magic; /* indicates flash has been initialized */
-
- u32 mn_rdimm;
- u32 mn_dll_override;
-
-};
-
-#define FLASH_NUM_PORTS (4)
-
-struct netxen_flash_mac_addr {
- u32 flash_addr[32];
-};
-
-struct netxen_user_old_info {
- u8 flash_md5[16];
- u8 crbinit_md5[16];
- u8 brdcfg_md5[16];
- /* bootloader */
- u32 bootld_version;
- u32 bootld_size;
- u8 bootld_md5[16];
- /* image */
- u32 image_version;
- u32 image_size;
- u8 image_md5[16];
- /* primary image status */
- u32 primary_status;
- u32 secondary_present;
-
- /* MAC address , 4 ports */
- struct netxen_flash_mac_addr mac_addr[FLASH_NUM_PORTS];
-};
-#define FLASH_NUM_MAC_PER_PORT 32
-struct netxen_user_info {
- u8 flash_md5[16 * 64];
- /* bootloader */
- u32 bootld_version;
- u32 bootld_size;
- /* image */
- u32 image_version;
- u32 image_size;
- /* primary image status */
- u32 primary_status;
- u32 secondary_present;
-
- /* MAC address , 4 ports, 32 address per port */
- u64 mac_addr[FLASH_NUM_PORTS * FLASH_NUM_MAC_PER_PORT];
- u32 sub_sys_id;
- u8 serial_num[32];
-
- /* Any user defined data */
-};
-
-/*
- * Flash Layout - new format.
- */
-struct netxen_new_user_info {
- u8 flash_md5[16 * 64];
- /* bootloader */
- u32 bootld_version;
- u32 bootld_size;
- /* image */
- u32 image_version;
- u32 image_size;
- /* primary image status */
- u32 primary_status;
- u32 secondary_present;
-
- /* MAC address , 4 ports, 32 address per port */
- u64 mac_addr[FLASH_NUM_PORTS * FLASH_NUM_MAC_PER_PORT];
- u32 sub_sys_id;
- u8 serial_num[32];
-
- /* Any user defined data */
-};
-
-#define SECONDARY_IMAGE_PRESENT 0xb3b4b5b6
-#define SECONDARY_IMAGE_ABSENT 0xffffffff
-#define PRIMARY_IMAGE_GOOD 0x5a5a5a5a
-#define PRIMARY_IMAGE_BAD 0xffffffff
-
/* Flash memory map */
#define NETXEN_CRBINIT_START 0 /* crbinit section */
#define NETXEN_BRDCFG_START 0x4000 /* board config */
@@ -617,28 +468,25 @@
#define NETXEN_PXE_START 0x3E0000 /* PXE boot rom */
#define NETXEN_USER_START 0x3E8000 /* Firmare info */
#define NETXEN_FIXED_START 0x3F0000 /* backup of crbinit */
+#define NETXEN_USER_START_OLD NETXEN_PXE_START /* very old flash */
+#define NX_OLD_MAC_ADDR_OFFSET (NETXEN_USER_START)
#define NX_FW_VERSION_OFFSET (NETXEN_USER_START+0x408)
#define NX_FW_SIZE_OFFSET (NETXEN_USER_START+0x40c)
+#define NX_FW_MAC_ADDR_OFFSET (NETXEN_USER_START+0x418)
+#define NX_FW_SERIAL_NUM_OFFSET (NETXEN_USER_START+0x81c)
#define NX_BIOS_VERSION_OFFSET (NETXEN_USER_START+0x83c)
+
+#define NX_HDR_VERSION_OFFSET (NETXEN_BRDCFG_START)
+#define NX_BRDTYPE_OFFSET (NETXEN_BRDCFG_START+0x8)
#define NX_FW_MAGIC_OFFSET (NETXEN_BRDCFG_START+0x128)
+
#define NX_FW_MIN_SIZE (0x3fffff)
#define NX_P2_MN_ROMIMAGE 0
#define NX_P3_CT_ROMIMAGE 1
#define NX_P3_MN_ROMIMAGE 2
#define NX_FLASH_ROMIMAGE 3
-#define NETXEN_USER_START_OLD NETXEN_PXE_START /* for backward compatibility */
-
-#define NETXEN_FLASH_START (NETXEN_CRBINIT_START)
-#define NETXEN_INIT_SECTOR (0)
-#define NETXEN_PRIMARY_START (NETXEN_BOOTLD_START)
-#define NETXEN_FLASH_CRBINIT_SIZE (0x4000)
-#define NETXEN_FLASH_BRDCFG_SIZE (sizeof(struct netxen_board_info))
-#define NETXEN_FLASH_USER_SIZE (sizeof(struct netxen_user_info)/sizeof(u32))
-#define NETXEN_FLASH_SECONDARY_SIZE (NETXEN_USER_START-NETXEN_SECONDARY_START)
-#define NETXEN_NUM_PRIMARY_SECTORS (0x20)
-#define NETXEN_NUM_CONFIG_SECTORS (1)
extern char netxen_nic_driver_name[];
/* Number of status descriptors to handle per interrupt */
@@ -653,17 +501,11 @@
u64 length;
};
-#define _netxen_set_bits(config_word, start, bits, val) {\
- unsigned long long __tmask = (((1ULL << (bits)) - 1) << (start));\
- unsigned long long __tvalue = (val); \
- (config_word) &= ~__tmask; \
- (config_word) |= (((__tvalue) << (start)) & __tmask); \
-}
-
-#define _netxen_clear_bits(config_word, start, bits) {\
- unsigned long long __tmask = (((1ULL << (bits)) - 1) << (start)); \
- (config_word) &= ~__tmask; \
-}
+struct netxen_recv_crb {
+ u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
+ u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
+ u32 sw_int_mask[NUM_STS_DESC_RINGS];
+};
/* Following defines are for the state of the buffers */
#define NETXEN_BUFFER_FREE 0
@@ -706,8 +548,8 @@
int qdr_sn_window;
int ddr_mn_window;
- unsigned long mn_win_crb;
- unsigned long ms_win_crb;
+ u32 mn_win_crb;
+ u32 ms_win_crb;
u8 cut_through;
u8 revision_id;
@@ -726,7 +568,8 @@
u64 rxdropped;
u64 txdropped;
u64 csummed;
- u64 no_rcv;
+ u64 rx_pkts;
+ u64 lro_pkts;
u64 rxbytes;
u64 txbytes;
};
@@ -737,11 +580,11 @@
*/
struct nx_host_rds_ring {
u32 producer;
- u32 crb_rcv_producer;
u32 num_desc;
u32 dma_size;
u32 skb_size;
u32 flags;
+ void __iomem *crb_rcv_producer;
struct rcv_desc *desc_head;
struct netxen_rx_buffer *rx_buf_arr;
struct list_head free_list;
@@ -751,9 +594,9 @@
struct nx_host_sds_ring {
u32 consumer;
- u32 crb_sts_consumer;
- u32 crb_intr_mask;
u32 num_desc;
+ void __iomem *crb_sts_consumer;
+ void __iomem *crb_intr_mask;
struct status_desc *desc_head;
struct netxen_adapter *adapter;
@@ -770,8 +613,8 @@
u32 producer;
__le32 *hw_consumer;
u32 sw_consumer;
- u32 crb_cmd_producer;
- u32 crb_cmd_consumer;
+ void __iomem *crb_cmd_producer;
+ void __iomem *crb_cmd_consumer;
u32 num_desc;
struct netdev_queue *txq;
@@ -840,7 +683,19 @@
#define NX_CDRP_CMD_GET_STATISTICS 0x0000000f
#define NX_CDRP_CMD_DELETE_STATISTICS 0x00000010
#define NX_CDRP_CMD_SET_MTU 0x00000012
-#define NX_CDRP_CMD_MAX 0x00000013
+#define NX_CDRP_CMD_READ_PHY 0x00000013
+#define NX_CDRP_CMD_WRITE_PHY 0x00000014
+#define NX_CDRP_CMD_READ_HW_REG 0x00000015
+#define NX_CDRP_CMD_GET_FLOW_CTL 0x00000016
+#define NX_CDRP_CMD_SET_FLOW_CTL 0x00000017
+#define NX_CDRP_CMD_READ_MAX_MTU 0x00000018
+#define NX_CDRP_CMD_READ_MAX_LRO 0x00000019
+#define NX_CDRP_CMD_CONFIGURE_TOE 0x0000001a
+#define NX_CDRP_CMD_FUNC_ATTRIB 0x0000001b
+#define NX_CDRP_CMD_READ_PEXQ_PARAMETERS 0x0000001c
+#define NX_CDRP_CMD_GET_LIC_CAPABILITIES 0x0000001d
+#define NX_CDRP_CMD_READ_MAX_LRO_PER_BOARD 0x0000001e
+#define NX_CDRP_CMD_MAX 0x0000001f
#define NX_RCODE_SUCCESS 0
#define NX_RCODE_NO_HOST_MEM 1
@@ -881,6 +736,7 @@
#define NX_CAP0_LSO NX_CAP_BIT(0, 6)
#define NX_CAP0_JUMBO_CONTIGUOUS NX_CAP_BIT(0, 7)
#define NX_CAP0_LRO_CONTIGUOUS NX_CAP_BIT(0, 8)
+#define NX_CAP0_HW_LRO NX_CAP_BIT(0, 10)
/*
* Context state
@@ -1078,6 +934,9 @@
#define NX_MAC_EVENT 0x1
+#define NX_IP_UP 2
+#define NX_IP_DOWN 3
+
/*
* Driver --> Firmware
*/
@@ -1104,7 +963,9 @@
#define NX_NIC_H2C_OPCODE_PROXY_STOP_DONE 20
#define NX_NIC_H2C_OPCODE_GET_LINKEVENT 21
#define NX_NIC_C2C_OPCODE 22
-#define NX_NIC_H2C_OPCODE_LAST 23
+#define NX_NIC_H2C_OPCODE_CONFIG_BRIDGING 23
+#define NX_NIC_H2C_OPCODE_CONFIG_HW_LRO 24
+#define NX_NIC_H2C_OPCODE_LAST 25
/*
* Firmware --> Driver
@@ -1130,8 +991,25 @@
#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
+#define NX_NIC_LRO_REQUEST_FIRST 0
+#define NX_NIC_LRO_REQUEST_ADD_FLOW 1
+#define NX_NIC_LRO_REQUEST_DELETE_FLOW 2
+#define NX_NIC_LRO_REQUEST_TIMER 3
+#define NX_NIC_LRO_REQUEST_CLEANUP 4
+#define NX_NIC_LRO_REQUEST_ADD_FLOW_SCHEDULED 5
+#define NX_TOE_LRO_REQUEST_ADD_FLOW 6
+#define NX_TOE_LRO_REQUEST_ADD_FLOW_RESPONSE 7
+#define NX_TOE_LRO_REQUEST_DELETE_FLOW 8
+#define NX_TOE_LRO_REQUEST_DELETE_FLOW_RESPONSE 9
+#define NX_TOE_LRO_REQUEST_TIMER 10
+#define NX_NIC_LRO_REQUEST_LAST 11
+
#define NX_FW_CAPABILITY_LINK_NOTIFICATION (1 << 5)
#define NX_FW_CAPABILITY_SWITCHING (1 << 6)
+#define NX_FW_CAPABILITY_PEXQ (1 << 7)
+#define NX_FW_CAPABILITY_BDG (1 << 8)
+#define NX_FW_CAPABILITY_FVLANTX (1 << 9)
+#define NX_FW_CAPABILITY_HW_LRO (1 << 10)
/* module types */
#define LINKEVENT_MODULE_NOT_PRESENT 1
@@ -1206,6 +1084,8 @@
#define NETXEN_NIC_MSI_ENABLED 0x02
#define NETXEN_NIC_MSIX_ENABLED 0x04
+#define NETXEN_NIC_LRO_ENABLED 0x08
+#define NETXEN_NIC_BRIDGE_ENABLED 0X10
#define NETXEN_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
@@ -1219,6 +1099,10 @@
#define NETXEN_ADAPTER_UP_MAGIC 777
#define NETXEN_NIC_PEG_TUNE 0
+#define __NX_FW_ATTACHED 0
+#define __NX_DEV_UP 1
+#define __NX_RESETTING 2
+
struct netxen_dummy_dma {
void *addr;
dma_addr_t phys_addr;
@@ -1255,7 +1139,10 @@
u8 max_mc_count;
u8 rss_supported;
u8 link_changed;
- u32 resv3;
+ u8 fw_wait_cnt;
+ u8 fw_fail_cnt;
+ u8 tx_timeo_cnt;
+ u8 need_fw_reset;
u8 has_link_events;
u8 fw_type;
@@ -1273,79 +1160,64 @@
u32 irq;
u32 temp;
- u32 msi_tgt_status;
- u32 resv4;
+ u32 int_vec_bit;
+ u32 heartbit;
struct netxen_adapter_stats stats;
struct netxen_recv_context recv_ctx;
struct nx_host_tx_ring *tx_ring;
- int (*enable_phy_interrupts) (struct netxen_adapter *);
- int (*disable_phy_interrupts) (struct netxen_adapter *);
int (*macaddr_set) (struct netxen_adapter *, u8 *);
int (*set_mtu) (struct netxen_adapter *, int);
int (*set_promisc) (struct netxen_adapter *, u32);
void (*set_multi) (struct net_device *);
- int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
- int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
+ int (*phy_read) (struct netxen_adapter *, u32 reg, u32 *);
+ int (*phy_write) (struct netxen_adapter *, u32 reg, u32 val);
int (*init_port) (struct netxen_adapter *, int);
int (*stop_port) (struct netxen_adapter *);
- u32 (*hw_read_wx)(struct netxen_adapter *, ulong);
- int (*hw_write_wx)(struct netxen_adapter *, ulong, u32);
+ u32 (*crb_read)(struct netxen_adapter *, ulong);
+ int (*crb_write)(struct netxen_adapter *, ulong, u32);
+
int (*pci_mem_read)(struct netxen_adapter *, u64, void *, int);
int (*pci_mem_write)(struct netxen_adapter *, u64, void *, int);
- int (*pci_write_immediate)(struct netxen_adapter *, u64, u32);
- u32 (*pci_read_immediate)(struct netxen_adapter *, u64);
+
unsigned long (*pci_set_window)(struct netxen_adapter *,
unsigned long long);
- struct netxen_legacy_intr_set legacy_intr;
+ u32 (*io_read)(struct netxen_adapter *, void __iomem *);
+ void (*io_write)(struct netxen_adapter *, void __iomem *, u32);
+
+ void __iomem *tgt_mask_reg;
+ void __iomem *pci_int_reg;
+ void __iomem *tgt_status_reg;
+ void __iomem *crb_int_state_reg;
+ void __iomem *isr_int_vec;
struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
struct netxen_dummy_dma dummy_dma;
- struct work_struct watchdog_task;
- struct timer_list watchdog_timer;
+ struct delayed_work fw_work;
+
struct work_struct tx_timeout_task;
struct net_device_stats net_stats;
nx_nic_intr_coalesce_t coal;
- u32 fw_major;
+ unsigned long state;
+ u32 resv5;
u32 fw_version;
const struct firmware *fw;
};
-/*
- * NetXen dma watchdog control structure
- *
- * Bit 0 : enabled => R/O: 1 watchdog active, 0 inactive
- * Bit 1 : disable_request => 1 req disable dma watchdog
- * Bit 2 : enable_request => 1 req enable dma watchdog
- * Bit 3-31 : unused
- */
+int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port);
+int netxen_niu_disable_xg_port(struct netxen_adapter *adapter);
-#define netxen_set_dma_watchdog_disable_req(config_word) \
- _netxen_set_bits(config_word, 1, 1, 1)
-#define netxen_set_dma_watchdog_enable_req(config_word) \
- _netxen_set_bits(config_word, 2, 1, 1)
-#define netxen_get_dma_watchdog_enabled(config_word) \
- ((config_word) & 0x1)
-#define netxen_get_dma_watchdog_disabled(config_word) \
- (((config_word) >> 1) & 0x1)
-
-int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter);
-int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter);
-int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter);
-int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter);
-int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
- __u32 * readval);
-int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
- long reg, __u32 val);
+int nx_fw_cmd_query_phy(struct netxen_adapter *adapter, u32 reg, u32 *val);
+int nx_fw_cmd_set_phy(struct netxen_adapter *adapter, u32 reg, u32 val);
/* Functions available from netxen_nic_hw.c */
int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu);
@@ -1355,51 +1227,45 @@
int netxen_p3_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr);
#define NXRD32(adapter, off) \
- (adapter->hw_read_wx(adapter, off))
+ (adapter->crb_read(adapter, off))
#define NXWR32(adapter, off, val) \
- (adapter->hw_write_wx(adapter, off, val))
+ (adapter->crb_write(adapter, off, val))
+#define NXRDIO(adapter, addr) \
+ (adapter->io_read(adapter, addr))
+#define NXWRIO(adapter, addr, val) \
+ (adapter->io_write(adapter, addr, val))
+
+int netxen_pcie_sem_lock(struct netxen_adapter *, int, u32);
+void netxen_pcie_sem_unlock(struct netxen_adapter *, int);
+
+#define netxen_rom_lock(a) \
+ netxen_pcie_sem_lock((a), 2, NETXEN_ROM_LOCK_ID)
+#define netxen_rom_unlock(a) \
+ netxen_pcie_sem_unlock((a), 2)
+#define netxen_phy_lock(a) \
+ netxen_pcie_sem_lock((a), 3, NETXEN_PHY_LOCK_ID)
+#define netxen_phy_unlock(a) \
+ netxen_pcie_sem_unlock((a), 3)
+#define netxen_api_lock(a) \
+ netxen_pcie_sem_lock((a), 5, 0)
+#define netxen_api_unlock(a) \
+ netxen_pcie_sem_unlock((a), 5)
+#define netxen_sw_lock(a) \
+ netxen_pcie_sem_lock((a), 6, 0)
+#define netxen_sw_unlock(a) \
+ netxen_pcie_sem_unlock((a), 6)
+#define crb_win_lock(a) \
+ netxen_pcie_sem_lock((a), 7, NETXEN_CRB_WIN_LOCK_ID)
+#define crb_win_unlock(a) \
+ netxen_pcie_sem_unlock((a), 7)
int netxen_nic_get_board_info(struct netxen_adapter *adapter);
-void netxen_nic_get_firmware_info(struct netxen_adapter *adapter);
int netxen_nic_wol_supported(struct netxen_adapter *adapter);
-u32 netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off);
-int netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
- ulong off, u32 data);
-int netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
- u64 off, void *data, int size);
-int netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
- u64 off, void *data, int size);
-int netxen_nic_pci_write_immediate_128M(struct netxen_adapter *adapter,
- u64 off, u32 data);
-u32 netxen_nic_pci_read_immediate_128M(struct netxen_adapter *adapter, u64 off);
-void netxen_nic_pci_write_normalize_128M(struct netxen_adapter *adapter,
- u64 off, u32 data);
-u32 netxen_nic_pci_read_normalize_128M(struct netxen_adapter *adapter, u64 off);
-unsigned long netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
- unsigned long long addr);
-void netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter,
- u32 wndw);
-
-u32 netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off);
-int netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
- ulong off, u32 data);
-int netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
- u64 off, void *data, int size);
-int netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
- u64 off, void *data, int size);
-int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
- u64 off, u32 data);
-u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off);
-void netxen_nic_pci_write_normalize_2M(struct netxen_adapter *adapter,
- u64 off, u32 data);
-u32 netxen_nic_pci_read_normalize_2M(struct netxen_adapter *adapter, u64 off);
-unsigned long netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
- unsigned long long addr);
-
/* Functions from netxen_nic_init.c */
-void netxen_free_adapter_offload(struct netxen_adapter *adapter);
-int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
+int netxen_init_dummy_dma(struct netxen_adapter *adapter);
+void netxen_free_dummy_dma(struct netxen_adapter *adapter);
+
int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
int netxen_load_firmware(struct netxen_adapter *adapter);
int netxen_need_fw_reset(struct netxen_adapter *adapter);
@@ -1423,13 +1289,15 @@
int netxen_alloc_sw_resources(struct netxen_adapter *adapter);
void netxen_free_sw_resources(struct netxen_adapter *adapter);
+void netxen_setup_hwops(struct netxen_adapter *adapter);
+void __iomem *netxen_get_ioaddr(struct netxen_adapter *, u32);
+
int netxen_alloc_hw_resources(struct netxen_adapter *adapter);
void netxen_free_hw_resources(struct netxen_adapter *adapter);
void netxen_release_rx_buffers(struct netxen_adapter *adapter);
void netxen_release_tx_buffers(struct netxen_adapter *adapter);
-void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
int netxen_init_firmware(struct netxen_adapter *adapter);
void netxen_nic_clear_stats(struct netxen_adapter *adapter);
void netxen_watchdog_task(struct work_struct *work);
@@ -1440,14 +1308,19 @@
void netxen_p2_nic_set_multi(struct net_device *netdev);
void netxen_p3_nic_set_multi(struct net_device *netdev);
void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
+int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode);
int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
int netxen_config_rss(struct netxen_adapter *adapter, int enable);
+int netxen_config_ipaddr(struct netxen_adapter *adapter, u32 ip, int cmd);
int netxen_linkevent_request(struct netxen_adapter *adapter, int enable);
void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup);
int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
+int netxen_config_hw_lro(struct netxen_adapter *adapter, int enable);
+int netxen_config_bridged_mode(struct netxen_adapter *adapter, int enable);
+int netxen_send_lro_cleanup(struct netxen_adapter *adapter);
int netxen_nic_set_mac(struct net_device *netdev, void *p);
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
@@ -1455,6 +1328,9 @@
void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
struct nx_host_tx_ring *tx_ring);
+/* Functions from netxen_nic_main.c */
+int netxen_nic_reset_context(struct netxen_adapter *);
+
/*
* NetXen Board information
*/
@@ -1505,56 +1381,6 @@
name = "Unknown";
}
-static inline int
-dma_watchdog_shutdown_request(struct netxen_adapter *adapter)
-{
- u32 ctrl;
-
- /* check if already inactive */
- ctrl = adapter->hw_read_wx(adapter,
- NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
-
- if (netxen_get_dma_watchdog_enabled(ctrl) == 0)
- return 1;
-
- /* Send the disable request */
- netxen_set_dma_watchdog_disable_req(ctrl);
- NXWR32(adapter, NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
-
- return 0;
-}
-
-static inline int
-dma_watchdog_shutdown_poll_result(struct netxen_adapter *adapter)
-{
- u32 ctrl;
-
- ctrl = adapter->hw_read_wx(adapter,
- NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
-
- return (netxen_get_dma_watchdog_enabled(ctrl) == 0);
-}
-
-static inline int
-dma_watchdog_wakeup(struct netxen_adapter *adapter)
-{
- u32 ctrl;
-
- ctrl = adapter->hw_read_wx(adapter,
- NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL));
-
- if (netxen_get_dma_watchdog_enabled(ctrl))
- return 1;
-
- /* send the wakeup request */
- netxen_set_dma_watchdog_enable_req(ctrl);
-
- NXWR32(adapter, NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), ctrl);
-
- return 0;
-}
-
-
static inline u32 netxen_tx_avail(struct nx_host_tx_ring *tx_ring)
{
smp_mb();
@@ -1569,6 +1395,6 @@
extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
int *valp);
-extern struct ethtool_ops netxen_nic_ethtool_ops;
+extern const struct ethtool_ops netxen_nic_ethtool_ops;
#endif /* __NETXEN_NIC_H_ */
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 9f8ae47..9cb8f68 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,55 +21,13 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#include "netxen_nic_hw.h"
#include "netxen_nic.h"
-#include "netxen_nic_phan_reg.h"
#define NXHAL_VERSION 1
-static int
-netxen_api_lock(struct netxen_adapter *adapter)
-{
- u32 done = 0, timeout = 0;
-
- for (;;) {
- /* Acquire PCIE HW semaphore5 */
- done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM5_LOCK));
-
- if (done == 1)
- break;
-
- if (++timeout >= NX_OS_CRB_RETRY_COUNT) {
- printk(KERN_ERR "%s: lock timeout.\n", __func__);
- return -1;
- }
-
- msleep(1);
- }
-
-#if 0
- NXWR32(adapter,
- NETXEN_API_LOCK_ID, NX_OS_API_LOCK_DRIVER);
-#endif
- return 0;
-}
-
-static int
-netxen_api_unlock(struct netxen_adapter *adapter)
-{
- /* Release PCIE HW semaphore5 */
- NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM5_UNLOCK));
- return 0;
-}
-
static u32
netxen_poll_rsp(struct netxen_adapter *adapter)
{
@@ -265,7 +224,8 @@
rds_ring = &recv_ctx->rds_rings[i];
reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
- rds_ring->crb_rcv_producer = NETXEN_NIC_REG(reg - 0x200);
+ rds_ring->crb_rcv_producer = netxen_get_ioaddr(adapter,
+ NETXEN_NIC_REG(reg - 0x200));
}
prsp_sds = ((nx_cardrsp_sds_ring_t *)
@@ -275,10 +235,12 @@
sds_ring = &recv_ctx->sds_rings[i];
reg = le32_to_cpu(prsp_sds[i].host_consumer_crb);
- sds_ring->crb_sts_consumer = NETXEN_NIC_REG(reg - 0x200);
+ sds_ring->crb_sts_consumer = netxen_get_ioaddr(adapter,
+ NETXEN_NIC_REG(reg - 0x200));
reg = le32_to_cpu(prsp_sds[i].interrupt_crb);
- sds_ring->crb_intr_mask = NETXEN_NIC_REG(reg - 0x200);
+ sds_ring->crb_intr_mask = netxen_get_ioaddr(adapter,
+ NETXEN_NIC_REG(reg - 0x200));
}
recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
@@ -378,7 +340,8 @@
if (err == NX_RCODE_SUCCESS) {
temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
- tx_ring->crb_cmd_producer = NETXEN_NIC_REG(temp - 0x200);
+ tx_ring->crb_cmd_producer = netxen_get_ioaddr(adapter,
+ NETXEN_NIC_REG(temp - 0x200));
#if 0
adapter->tx_state =
le32_to_cpu(prsp->host_ctx_state);
@@ -416,6 +379,44 @@
}
}
+int
+nx_fw_cmd_query_phy(struct netxen_adapter *adapter, u32 reg, u32 *val)
+{
+ u32 rcode;
+
+ rcode = netxen_issue_cmd(adapter,
+ adapter->ahw.pci_func,
+ NXHAL_VERSION,
+ reg,
+ 0,
+ 0,
+ NX_CDRP_CMD_READ_PHY);
+
+ if (rcode != NX_RCODE_SUCCESS)
+ return -EIO;
+
+ return NXRD32(adapter, NX_ARG1_CRB_OFFSET);
+}
+
+int
+nx_fw_cmd_set_phy(struct netxen_adapter *adapter, u32 reg, u32 val)
+{
+ u32 rcode;
+
+ rcode = netxen_issue_cmd(adapter,
+ adapter->ahw.pci_func,
+ NXHAL_VERSION,
+ reg,
+ val,
+ 0,
+ NX_CDRP_CMD_WRITE_PHY);
+
+ if (rcode != NX_RCODE_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+
static u64 ctx_addr_sig_regs[][3] = {
{NETXEN_NIC_REG(0x188), NETXEN_NIC_REG(0x18c), NETXEN_NIC_REG(0x1c0)},
{NETXEN_NIC_REG(0x190), NETXEN_NIC_REG(0x194), NETXEN_NIC_REG(0x1c4)},
@@ -647,9 +648,10 @@
}
rds_ring->desc_head = (struct rcv_desc *)addr;
- if (adapter->fw_major < 4)
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
rds_ring->crb_rcv_producer =
- recv_crb_registers[port].crb_rcv_producer[ring];
+ netxen_get_ioaddr(adapter,
+ recv_crb_registers[port].crb_rcv_producer[ring]);
}
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
@@ -668,14 +670,19 @@
sds_ring->desc_head = (struct status_desc *)addr;
sds_ring->crb_sts_consumer =
- recv_crb_registers[port].crb_sts_consumer[ring];
+ netxen_get_ioaddr(adapter,
+ recv_crb_registers[port].crb_sts_consumer[ring]);
sds_ring->crb_intr_mask =
- recv_crb_registers[port].sw_int_mask[ring];
+ netxen_get_ioaddr(adapter,
+ recv_crb_registers[port].sw_int_mask[ring]);
}
- if (adapter->fw_major >= 4) {
+ if (!NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ if (test_and_set_bit(__NX_FW_ATTACHED, &adapter->state))
+ goto done;
+
err = nx_fw_cmd_create_rx_ctx(adapter);
if (err)
goto err_out_free;
@@ -688,6 +695,7 @@
goto err_out_free;
}
+done:
return 0;
err_out_free:
@@ -705,7 +713,10 @@
int port = adapter->portnum;
- if (adapter->fw_major >= 4) {
+ if (!NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ if (!test_and_clear_bit(__NX_FW_ATTACHED, &adapter->state))
+ goto done;
+
nx_fw_cmd_destroy_rx_ctx(adapter);
nx_fw_cmd_destroy_tx_ctx(adapter);
} else {
@@ -718,6 +729,7 @@
/* Allow dma queues to drain after context reset */
msleep(20);
+done:
recv_ctx = &adapter->recv_ctx;
if (recv_ctx->hwctx != NULL) {
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index e16ea46..714f387 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,12 +21,6 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#include <linux/types.h>
@@ -37,7 +32,6 @@
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
-#include "netxen_nic_phan_reg.h"
struct netxen_nic_stats {
char stat_string[ETH_GSTRING_LEN];
@@ -57,7 +51,8 @@
{"rx_dropped", NETXEN_NIC_STAT(stats.rxdropped)},
{"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)},
{"csummed", NETXEN_NIC_STAT(stats.csummed)},
- {"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)},
+ {"rx_pkts", NETXEN_NIC_STAT(stats.rx_pkts)},
+ {"lro_pkts", NETXEN_NIC_STAT(stats.lro_pkts)},
{"rx_bytes", NETXEN_NIC_STAT(stats.rxbytes)},
{"tx_bytes", NETXEN_NIC_STAT(stats.txbytes)},
};
@@ -84,18 +79,17 @@
netxen_nic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- unsigned long flags;
u32 fw_major = 0;
u32 fw_minor = 0;
u32 fw_build = 0;
strncpy(drvinfo->driver, netxen_nic_driver_name, 32);
strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32);
- write_lock_irqsave(&adapter->adapter_lock, flags);
+ read_lock(&adapter->adapter_lock);
fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
+ read_unlock(&adapter->adapter_lock);
sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
@@ -490,28 +484,86 @@
}
static void
-netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
+netxen_nic_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- ring->rx_pending = 0;
- ring->rx_jumbo_pending = 0;
- ring->rx_pending += adapter->recv_ctx.
- rds_rings[RCV_RING_NORMAL].num_desc;
- ring->rx_jumbo_pending += adapter->recv_ctx.
- rds_rings[RCV_RING_JUMBO].num_desc;
+ ring->rx_pending = adapter->num_rxd;
+ ring->rx_jumbo_pending = adapter->num_jumbo_rxd;
+ ring->rx_jumbo_pending += adapter->num_lro_rxd;
ring->tx_pending = adapter->num_txd;
- if (adapter->ahw.port_type == NETXEN_NIC_GBE)
+ if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
- else
+ ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+ } else {
ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
- ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
- ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
+ ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+ }
+
+ ring->tx_max_pending = MAX_CMD_DESCRIPTORS;
+
ring->rx_mini_max_pending = 0;
ring->rx_mini_pending = 0;
}
+static u32
+netxen_validate_ringparam(u32 val, u32 min, u32 max, char *r_name)
+{
+ u32 num_desc;
+ num_desc = max(val, min);
+ num_desc = min(num_desc, max);
+ num_desc = roundup_pow_of_two(num_desc);
+
+ if (val != num_desc) {
+ printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n",
+ netxen_nic_driver_name, r_name, num_desc, val);
+ }
+
+ return num_desc;
+}
+
+static int
+netxen_nic_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct netxen_adapter *adapter = netdev_priv(dev);
+ u16 max_rcv_desc = MAX_RCV_DESCRIPTORS_10G;
+ u16 max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+ u16 num_rxd, num_jumbo_rxd, num_txd;
+
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return -EOPNOTSUPP;
+
+ if (ring->rx_mini_pending)
+ return -EOPNOTSUPP;
+
+ if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
+ max_rcv_desc = MAX_RCV_DESCRIPTORS_1G;
+ max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+ }
+
+ num_rxd = netxen_validate_ringparam(ring->rx_pending,
+ MIN_RCV_DESCRIPTORS, max_rcv_desc, "rx");
+
+ num_jumbo_rxd = netxen_validate_ringparam(ring->rx_jumbo_pending,
+ MIN_JUMBO_DESCRIPTORS, max_jumbo_desc, "rx jumbo");
+
+ num_txd = netxen_validate_ringparam(ring->tx_pending,
+ MIN_CMD_DESCRIPTORS, MAX_CMD_DESCRIPTORS, "tx");
+
+ if (num_rxd == adapter->num_rxd && num_txd == adapter->num_txd &&
+ num_jumbo_rxd == adapter->num_jumbo_rxd)
+ return 0;
+
+ adapter->num_rxd = num_rxd;
+ adapter->num_jumbo_rxd = num_jumbo_rxd;
+ adapter->num_txd = num_txd;
+
+ return netxen_nic_reset_context(adapter);
+}
+
static void
netxen_nic_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
@@ -883,7 +935,29 @@
return 0;
}
-struct ethtool_ops netxen_nic_ethtool_ops = {
+static int netxen_nic_set_flags(struct net_device *netdev, u32 data)
+{
+ struct netxen_adapter *adapter = netdev_priv(netdev);
+ int hw_lro;
+
+ if (!(adapter->capabilities & NX_FW_CAPABILITY_HW_LRO))
+ return -EINVAL;
+
+ ethtool_op_set_flags(netdev, data);
+
+ hw_lro = (data & ETH_FLAG_LRO) ? NETXEN_NIC_LRO_ENABLED : 0;
+
+ if (netxen_config_hw_lro(adapter, hw_lro))
+ return -EIO;
+
+ if ((hw_lro == 0) && netxen_send_lro_cleanup(adapter))
+ return -EIO;
+
+
+ return 0;
+}
+
+const struct ethtool_ops netxen_nic_ethtool_ops = {
.get_settings = netxen_nic_get_settings,
.set_settings = netxen_nic_set_settings,
.get_drvinfo = netxen_nic_get_drvinfo,
@@ -893,6 +967,7 @@
.get_eeprom_len = netxen_nic_get_eeprom_len,
.get_eeprom = netxen_nic_get_eeprom,
.get_ringparam = netxen_nic_get_ringparam,
+ .set_ringparam = netxen_nic_set_ringparam,
.get_pauseparam = netxen_nic_get_pauseparam,
.set_pauseparam = netxen_nic_set_pauseparam,
.set_tx_csum = ethtool_op_set_tx_csum,
@@ -909,4 +984,6 @@
.set_rx_csum = netxen_nic_set_rx_csum,
.get_coalesce = netxen_get_intr_coalesce,
.set_coalesce = netxen_set_intr_coalesce,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = netxen_nic_set_flags,
};
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 8241036..7a71774 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,12 +21,6 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#ifndef __NETXEN_NIC_HDR_H_
@@ -433,6 +428,7 @@
#define NETXEN_CRB_PEG_NET_1 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN1)
#define NETXEN_CRB_PEG_NET_2 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN2)
#define NETXEN_CRB_PEG_NET_3 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGN3)
+#define NETXEN_CRB_PEG_NET_4 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SQS2)
#define NETXEN_CRB_PEG_NET_D NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGND)
#define NETXEN_CRB_PEG_NET_I NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGNI)
#define NETXEN_CRB_DDR_NET NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_MN)
@@ -723,9 +719,92 @@
#define NETXEN_FW_VERSION_MINOR (NETXEN_CAM_RAM(0x154))
#define NETXEN_FW_VERSION_SUB (NETXEN_CAM_RAM(0x158))
#define NETXEN_ROM_LOCK_ID (NETXEN_CAM_RAM(0x100))
+#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120))
#define NETXEN_CRB_WIN_LOCK_ID (NETXEN_CAM_RAM(0x124))
-#define NETXEN_PHY_LOCK_ID (NETXEN_CAM_RAM(0x120))
+#define NIC_CRB_BASE (NETXEN_CAM_RAM(0x200))
+#define NIC_CRB_BASE_2 (NETXEN_CAM_RAM(0x700))
+#define NETXEN_NIC_REG(X) (NIC_CRB_BASE+(X))
+#define NETXEN_NIC_REG_2(X) (NIC_CRB_BASE_2+(X))
+
+#define NX_CDRP_CRB_OFFSET (NETXEN_NIC_REG(0x18))
+#define NX_ARG1_CRB_OFFSET (NETXEN_NIC_REG(0x1c))
+#define NX_ARG2_CRB_OFFSET (NETXEN_NIC_REG(0x20))
+#define NX_ARG3_CRB_OFFSET (NETXEN_NIC_REG(0x24))
+#define NX_SIGN_CRB_OFFSET (NETXEN_NIC_REG(0x28))
+
+#define CRB_HOST_DUMMY_BUF_ADDR_HI (NETXEN_NIC_REG(0x3c))
+#define CRB_HOST_DUMMY_BUF_ADDR_LO (NETXEN_NIC_REG(0x40))
+
+#define CRB_CMDPEG_STATE (NETXEN_NIC_REG(0x50))
+#define CRB_RCVPEG_STATE (NETXEN_NIC_REG(0x13c))
+
+#define CRB_XG_STATE (NETXEN_NIC_REG(0x94))
+#define CRB_XG_STATE_P3 (NETXEN_NIC_REG(0x98))
+#define CRB_PF_LINK_SPEED_1 (NETXEN_NIC_REG(0xe8))
+#define CRB_PF_LINK_SPEED_2 (NETXEN_NIC_REG(0xec))
+
+#define CRB_MPORT_MODE (NETXEN_NIC_REG(0xc4))
+#define CRB_DMA_SHIFT (NETXEN_NIC_REG(0xcc))
+#define CRB_INT_VECTOR (NETXEN_NIC_REG(0xd4))
+
+#define CRB_CMD_PRODUCER_OFFSET (NETXEN_NIC_REG(0x08))
+#define CRB_CMD_CONSUMER_OFFSET (NETXEN_NIC_REG(0x0c))
+#define CRB_CMD_PRODUCER_OFFSET_1 (NETXEN_NIC_REG(0x1ac))
+#define CRB_CMD_CONSUMER_OFFSET_1 (NETXEN_NIC_REG(0x1b0))
+#define CRB_CMD_PRODUCER_OFFSET_2 (NETXEN_NIC_REG(0x1b8))
+#define CRB_CMD_CONSUMER_OFFSET_2 (NETXEN_NIC_REG(0x1bc))
+#define CRB_CMD_PRODUCER_OFFSET_3 (NETXEN_NIC_REG(0x1d0))
+#define CRB_CMD_CONSUMER_OFFSET_3 (NETXEN_NIC_REG(0x1d4))
+#define CRB_TEMP_STATE (NETXEN_NIC_REG(0x1b4))
+
+#define CRB_V2P_0 (NETXEN_NIC_REG(0x290))
+#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
+#define CRB_DRIVER_VERSION (NETXEN_NIC_REG(0x2a0))
+
+#define CRB_SW_INT_MASK_0 (NETXEN_NIC_REG(0x1d8))
+#define CRB_SW_INT_MASK_1 (NETXEN_NIC_REG(0x1e0))
+#define CRB_SW_INT_MASK_2 (NETXEN_NIC_REG(0x1e4))
+#define CRB_SW_INT_MASK_3 (NETXEN_NIC_REG(0x1e8))
+
+#define CRB_FW_CAPABILITIES_1 (NETXEN_CAM_RAM(0x128))
+#define CRB_MAC_BLOCK_START (NETXEN_CAM_RAM(0x1c0))
+
+/*
+ * capabilities register, can be used to selectively enable/disable features
+ * for backward compability
+ */
+#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
+#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
+#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
+#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
+
+#define INTR_SCHEME_PERPORT 0x1
+#define MSI_MODE_MULTIFUNC 0x1
+
+/* used for ethtool tests */
+#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
+
+/*
+ * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
+ * which can be read by the Phantom host to get producer/consumer indexes from
+ * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
+ * registers will be used for the addresses of the ring's shared memory
+ * on the Phantom.
+ */
+
+#define nx_get_temp_val(x) ((x) >> 16)
+#define nx_get_temp_state(x) ((x) & 0xffff)
+#define nx_encode_temp(val, state) (((val) << 16) | (state))
+
+/*
+ * Temperature control.
+ */
+enum {
+ NX_TEMP_NORMAL = 0x1, /* Normal operating range */
+ NX_TEMP_WARN, /* Sound alert, temperature getting high */
+ NX_TEMP_PANIC /* Fatal error, hardware has shut down. */
+};
/* Lock IDs for PHY lock */
#define PHY_LOCK_DRIVER 0x44524956
@@ -816,16 +895,24 @@
#define PCIE_DCR 0x00d8
+#define PCIE_SEM0_LOCK (0x1c000)
+#define PCIE_SEM0_UNLOCK (0x1c004)
+#define PCIE_SEM1_LOCK (0x1c008)
+#define PCIE_SEM1_UNLOCK (0x1c00c)
#define PCIE_SEM2_LOCK (0x1c010) /* Flash lock */
#define PCIE_SEM2_UNLOCK (0x1c014) /* Flash unlock */
#define PCIE_SEM3_LOCK (0x1c018) /* Phy lock */
#define PCIE_SEM3_UNLOCK (0x1c01c) /* Phy unlock */
+#define PCIE_SEM4_LOCK (0x1c020)
+#define PCIE_SEM4_UNLOCK (0x1c024)
#define PCIE_SEM5_LOCK (0x1c028) /* API lock */
#define PCIE_SEM5_UNLOCK (0x1c02c) /* API unlock */
#define PCIE_SEM6_LOCK (0x1c030) /* sw lock */
#define PCIE_SEM6_UNLOCK (0x1c034) /* sw unlock */
#define PCIE_SEM7_LOCK (0x1c038) /* crb win lock */
#define PCIE_SEM7_UNLOCK (0x1c03c) /* crbwin unlock*/
+#define PCIE_SEM_LOCK(N) (PCIE_SEM0_LOCK + 8*(N))
+#define PCIE_SEM_UNLOCK(N) (PCIE_SEM0_UNLOCK + 8*(N))
#define PCIE_SETUP_FUNCTION (0x12040)
#define PCIE_SETUP_FUNCTION2 (0x12048)
@@ -852,8 +939,30 @@
#define NX_PEG_TUNE_MN_PRESENT 0x1
#define NX_PEG_TUNE_CAPABILITY (NETXEN_CAM_RAM(0x02c))
-#define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14)
+#define NETXEN_DMA_WATCHDOG_CTRL (NETXEN_CAM_RAM(0x14))
#define NETXEN_PEG_ALIVE_COUNTER (NETXEN_CAM_RAM(0xb0))
+#define NETXEN_PEG_HALT_STATUS1 (NETXEN_CAM_RAM(0xa8))
+#define NETXEN_PEG_HALT_STATUS2 (NETXEN_CAM_RAM(0xac))
+#define NX_CRB_DEV_REF_COUNT (NETXEN_CAM_RAM(0x138))
+#define NX_CRB_DEV_STATE (NETXEN_CAM_RAM(0x140))
+
+/* Device State */
+#define NX_DEV_COLD 1
+#define NX_DEV_INITALIZING 2
+#define NX_DEV_READY 3
+#define NX_DEV_NEED_RESET 4
+#define NX_DEV_NEED_QUISCENT 5
+#define NX_DEV_FAILED 6
+
+#define NX_RCODE_DRIVER_INFO 0x20000000
+#define NX_RCODE_DRIVER_CAN_RELOAD 0x40000000
+#define NX_RCODE_FATAL_ERROR 0x80000000
+#define NX_FWERROR_PEGNUM(code) ((code) & 0xff)
+#define NX_FWERROR_CODE(code) ((code >> 8) & 0xfffff)
+
+#define FW_POLL_DELAY (2 * HZ)
+#define FW_FAIL_THRESH 3
+#define FW_POLL_THRESH 10
#define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
#define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index b9123d4..3231400 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,17 +21,10 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
-#include "netxen_nic_phan_reg.h"
#include <net/ip.h>
@@ -87,7 +81,6 @@
return NULL;
}
-#define CRB_WIN_LOCK_TIMEOUT 100000000
static crb_128M_2M_block_map_t
crb_128M_2M_map[64] __cacheline_aligned_in_smp = {
{{{0, 0, 0, 0} } }, /* 0: PCI */
@@ -321,6 +314,64 @@
#define NETXEN_WINDOW_ONE 0x2000000 /*CRB Window: bit 25 of CRB address */
+#define NETXEN_PCIE_SEM_TIMEOUT 10000
+
+int
+netxen_pcie_sem_lock(struct netxen_adapter *adapter, int sem, u32 id_reg)
+{
+ int done = 0, timeout = 0;
+
+ while (!done) {
+ done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_LOCK(sem)));
+ if (done == 1)
+ break;
+ if (++timeout >= NETXEN_PCIE_SEM_TIMEOUT)
+ return -1;
+ msleep(1);
+ }
+
+ if (id_reg)
+ NXWR32(adapter, id_reg, adapter->portnum);
+
+ return 0;
+}
+
+void
+netxen_pcie_sem_unlock(struct netxen_adapter *adapter, int sem)
+{
+ int val;
+ val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM_UNLOCK(sem)));
+}
+
+int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
+{
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
+ NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
+ }
+
+ return 0;
+}
+
+/* Disable an XG interface */
+int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
+{
+ __u32 mac_cfg;
+ u32 port = adapter->physical_port;
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ return 0;
+
+ if (port > NETXEN_NIU_MAX_XG_PORTS)
+ return -EINVAL;
+
+ mac_cfg = 0;
+ if (NXWR32(adapter,
+ NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg))
+ return -EIO;
+ return 0;
+}
+
#define NETXEN_UNICAST_ADDR(port, index) \
(NETXEN_UNICAST_ADDR_BASE+(port*32)+(index*8))
#define NETXEN_MCAST_ADDR(port, index) \
@@ -330,6 +381,56 @@
#define MAC_LO(addr) \
((addr[5] << 16) | (addr[4] << 8) | (addr[3]))
+int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
+{
+ __u32 reg;
+ u32 port = adapter->physical_port;
+
+ if (port > NETXEN_NIU_MAX_XG_PORTS)
+ return -EINVAL;
+
+ reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
+ if (mode == NETXEN_NIU_PROMISC_MODE)
+ reg = (reg | 0x2000UL);
+ else
+ reg = (reg & ~0x2000UL);
+
+ if (mode == NETXEN_NIU_ALLMULTI_MODE)
+ reg = (reg | 0x1000UL);
+ else
+ reg = (reg & ~0x1000UL);
+
+ NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+
+ return 0;
+}
+
+int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
+{
+ u32 mac_hi, mac_lo;
+ u32 reg_hi, reg_lo;
+
+ u8 phy = adapter->physical_port;
+
+ if (phy >= NETXEN_NIU_MAX_XG_PORTS)
+ return -EINVAL;
+
+ mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24);
+ mac_hi = addr[2] | ((u32)addr[3] << 8) |
+ ((u32)addr[4] << 16) | ((u32)addr[5] << 24);
+
+ reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy);
+ reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy);
+
+ /* write twice to flush */
+ if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
+ return -EIO;
+ if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
+ return -EIO;
+
+ return 0;
+}
+
static int
netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
{
@@ -460,6 +561,9 @@
i = 0;
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return -EIO;
+
tx_ring = adapter->tx_ring;
__netif_tx_lock_bh(tx_ring->txq);
@@ -643,7 +747,7 @@
memset(&req, 0, sizeof(nx_nic_req_t));
- req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+ req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
req.req_hdr = cpu_to_le64(word);
@@ -659,6 +763,66 @@
return rv;
}
+int netxen_config_hw_lro(struct netxen_adapter *adapter, int enable)
+{
+ nx_nic_req_t req;
+ u64 word;
+ int rv = 0;
+
+ if ((adapter->flags & NETXEN_NIC_LRO_ENABLED) == enable)
+ return 0;
+
+ memset(&req, 0, sizeof(nx_nic_req_t));
+
+ req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+ word = NX_NIC_H2C_OPCODE_CONFIG_HW_LRO | ((u64)adapter->portnum << 16);
+ req.req_hdr = cpu_to_le64(word);
+
+ req.words[0] = cpu_to_le64(enable);
+
+ rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+ if (rv != 0) {
+ printk(KERN_ERR "ERROR. Could not send "
+ "configure hw lro request\n");
+ }
+
+ adapter->flags ^= NETXEN_NIC_LRO_ENABLED;
+
+ return rv;
+}
+
+int netxen_config_bridged_mode(struct netxen_adapter *adapter, int enable)
+{
+ nx_nic_req_t req;
+ u64 word;
+ int rv = 0;
+
+ if (!!(adapter->flags & NETXEN_NIC_BRIDGE_ENABLED) == enable)
+ return rv;
+
+ memset(&req, 0, sizeof(nx_nic_req_t));
+
+ req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+ word = NX_NIC_H2C_OPCODE_CONFIG_BRIDGING |
+ ((u64)adapter->portnum << 16);
+ req.req_hdr = cpu_to_le64(word);
+
+ req.words[0] = cpu_to_le64(enable);
+
+ rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+ if (rv != 0) {
+ printk(KERN_ERR "ERROR. Could not send "
+ "configure bridge mode request\n");
+ }
+
+ adapter->flags ^= NETXEN_NIC_BRIDGE_ENABLED;
+
+ return rv;
+}
+
+
#define RSS_HASHTYPE_IP_TCP 0x3
int netxen_config_rss(struct netxen_adapter *adapter, int enable)
@@ -706,6 +870,30 @@
return rv;
}
+int netxen_config_ipaddr(struct netxen_adapter *adapter, u32 ip, int cmd)
+{
+ nx_nic_req_t req;
+ u64 word;
+ int rv;
+
+ memset(&req, 0, sizeof(nx_nic_req_t));
+ req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+ word = NX_NIC_H2C_OPCODE_CONFIG_IPADDR | ((u64)adapter->portnum << 16);
+ req.req_hdr = cpu_to_le64(word);
+
+ req.words[0] = cpu_to_le64(cmd);
+ req.words[1] = cpu_to_le64(ip);
+
+ rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+ if (rv != 0) {
+ printk(KERN_ERR "%s: could not notify %s IP 0x%x reuqest\n",
+ adapter->netdev->name,
+ (cmd == NX_IP_UP) ? "Add" : "Remove", ip);
+ }
+ return rv;
+}
+
int netxen_linkevent_request(struct netxen_adapter *adapter, int enable)
{
nx_nic_req_t req;
@@ -728,6 +916,29 @@
return rv;
}
+int netxen_send_lro_cleanup(struct netxen_adapter *adapter)
+{
+ nx_nic_req_t req;
+ u64 word;
+ int rv;
+
+ memset(&req, 0, sizeof(nx_nic_req_t));
+ req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+ word = NX_NIC_H2C_OPCODE_LRO_REQUEST |
+ ((u64)adapter->portnum << 16) |
+ ((u64)NX_NIC_LRO_REQUEST_CLEANUP << 56) ;
+
+ req.req_hdr = cpu_to_le64(word);
+
+ rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+ if (rv != 0) {
+ printk(KERN_ERR "%s: could not cleanup lro flows\n",
+ adapter->netdev->name);
+ }
+ return rv;
+}
+
/*
* netxen_nic_change_mtu - Change the Maximum Transfer Unit
* @returns 0 on success, negative on failure
@@ -792,18 +1003,15 @@
__le32 *pmac = (__le32 *) mac;
u32 offset;
- offset = NETXEN_USER_START +
- offsetof(struct netxen_new_user_info, mac_addr) +
- adapter->portnum * sizeof(u64);
+ offset = NX_FW_MAC_ADDR_OFFSET + (adapter->portnum * sizeof(u64));
if (netxen_get_flash_block(adapter, offset, sizeof(u64), pmac) == -1)
return -1;
if (*mac == cpu_to_le64(~0ULL)) {
- offset = NETXEN_USER_START_OLD +
- offsetof(struct netxen_user_old_info, mac_addr) +
- adapter->portnum * sizeof(u64);
+ offset = NX_OLD_MAC_ADDR_OFFSET +
+ (adapter->portnum * sizeof(u64));
if (netxen_get_flash_block(adapter,
offset, sizeof(u64), pmac) == -1)
@@ -834,37 +1042,10 @@
return 0;
}
-#define CRB_WIN_LOCK_TIMEOUT 100000000
-
-static int crb_win_lock(struct netxen_adapter *adapter)
-{
- int done = 0, timeout = 0;
-
- while (!done) {
- /* acquire semaphore3 from PCI HW block */
- done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM7_LOCK));
- if (done == 1)
- break;
- if (timeout >= CRB_WIN_LOCK_TIMEOUT)
- return -1;
- timeout++;
- udelay(1);
- }
- NXWR32(adapter, NETXEN_CRB_WIN_LOCK_ID, adapter->portnum);
- return 0;
-}
-
-static void crb_win_unlock(struct netxen_adapter *adapter)
-{
- int val;
-
- val = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM7_UNLOCK));
-}
-
/*
* Changes the CRB window to the specified window.
*/
-void
+static void
netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter, u32 wndw)
{
void __iomem *offset;
@@ -977,61 +1158,68 @@
(ulong)adapter->ahw.pci_base0;
}
-int
+static int
netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter, ulong off, u32 data)
{
+ unsigned long flags;
void __iomem *addr;
- if (ADDR_IN_WINDOW1(off)) {
+ if (ADDR_IN_WINDOW1(off))
addr = NETXEN_CRB_NORMALIZE(adapter, off);
- } else { /* Window 0 */
+ else
addr = pci_base_offset(adapter, off);
- netxen_nic_pci_change_crbwindow_128M(adapter, 0);
- }
- if (!addr) {
- netxen_nic_pci_change_crbwindow_128M(adapter, 1);
- return 1;
- }
-
- writel(data, addr);
-
- if (!ADDR_IN_WINDOW1(off))
- netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-
- return 0;
-}
-
-u32
-netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off)
-{
- void __iomem *addr;
- u32 data;
+ BUG_ON(!addr);
if (ADDR_IN_WINDOW1(off)) { /* Window 1 */
- addr = NETXEN_CRB_NORMALIZE(adapter, off);
+ read_lock(&adapter->adapter_lock);
+ writel(data, addr);
+ read_unlock(&adapter->adapter_lock);
} else { /* Window 0 */
+ write_lock_irqsave(&adapter->adapter_lock, flags);
addr = pci_base_offset(adapter, off);
netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+ writel(data, addr);
+ netxen_nic_pci_change_crbwindow_128M(adapter, 1);
+ write_unlock_irqrestore(&adapter->adapter_lock, flags);
}
- if (!addr) {
+ return 0;
+}
+
+static u32
+netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off)
+{
+ unsigned long flags;
+ void __iomem *addr;
+ u32 data;
+
+ if (ADDR_IN_WINDOW1(off))
+ addr = NETXEN_CRB_NORMALIZE(adapter, off);
+ else
+ addr = pci_base_offset(adapter, off);
+
+ BUG_ON(!addr);
+
+ if (ADDR_IN_WINDOW1(off)) { /* Window 1 */
+ read_lock(&adapter->adapter_lock);
+ data = readl(addr);
+ read_unlock(&adapter->adapter_lock);
+ } else { /* Window 0 */
+ write_lock_irqsave(&adapter->adapter_lock, flags);
+ netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+ data = readl(addr);
netxen_nic_pci_change_crbwindow_128M(adapter, 1);
- return 1;
+ write_unlock_irqrestore(&adapter->adapter_lock, flags);
}
- data = readl(addr);
-
- if (!ADDR_IN_WINDOW1(off))
- netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-
return data;
}
-int
+static int
netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter, ulong off, u32 data)
{
- unsigned long flags = 0;
+ unsigned long flags;
int rv;
rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
@@ -1057,10 +1245,10 @@
return 0;
}
-u32
+static u32
netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter, ulong off)
{
- unsigned long flags = 0;
+ unsigned long flags;
int rv;
u32 data;
@@ -1086,28 +1274,9 @@
return data;
}
-/*
- * check memory access boundary.
- * used by test agent. support ddr access only for now
- */
-static unsigned long
-netxen_nic_pci_mem_bound_check(struct netxen_adapter *adapter,
- unsigned long long addr, int size)
-{
- if (!ADDR_IN_RANGE(addr,
- NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX) ||
- !ADDR_IN_RANGE(addr+size-1,
- NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX) ||
- ((size != 1) && (size != 2) && (size != 4) && (size != 8))) {
- return 0;
- }
-
- return 1;
-}
-
static int netxen_pci_set_window_warning_count;
-unsigned long
+static unsigned long
netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
unsigned long long addr)
{
@@ -1171,22 +1340,56 @@
return addr;
}
-/*
- * Note : only 32-bit writes!
- */
-int netxen_nic_pci_write_immediate_128M(struct netxen_adapter *adapter,
- u64 off, u32 data)
+/* window 1 registers only */
+static void netxen_nic_io_write_128M(struct netxen_adapter *adapter,
+ void __iomem *addr, u32 data)
{
- writel(data, (void __iomem *)(PCI_OFFSET_SECOND_RANGE(adapter, off)));
- return 0;
+ read_lock(&adapter->adapter_lock);
+ writel(data, addr);
+ read_unlock(&adapter->adapter_lock);
}
-u32 netxen_nic_pci_read_immediate_128M(struct netxen_adapter *adapter, u64 off)
+static u32 netxen_nic_io_read_128M(struct netxen_adapter *adapter,
+ void __iomem *addr)
{
- return readl((void __iomem *)(pci_base_offset(adapter, off)));
+ u32 val;
+
+ read_lock(&adapter->adapter_lock);
+ val = readl(addr);
+ read_unlock(&adapter->adapter_lock);
+
+ return val;
}
-unsigned long
+static void netxen_nic_io_write_2M(struct netxen_adapter *adapter,
+ void __iomem *addr, u32 data)
+{
+ writel(data, addr);
+}
+
+static u32 netxen_nic_io_read_2M(struct netxen_adapter *adapter,
+ void __iomem *addr)
+{
+ return readl(addr);
+}
+
+void __iomem *
+netxen_get_ioaddr(struct netxen_adapter *adapter, u32 offset)
+{
+ ulong off = offset;
+
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ if (offset < NETXEN_CRB_PCIX_HOST2 &&
+ offset > NETXEN_CRB_PCIX_HOST)
+ return PCI_OFFSET_SECOND_RANGE(adapter, offset);
+ return NETXEN_CRB_NORMALIZE(adapter, offset);
+ }
+
+ BUG_ON(netxen_nic_pci_get_crb_addr_2M(adapter, &off));
+ return (void __iomem *)off;
+}
+
+static unsigned long
netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
unsigned long long addr)
{
@@ -1197,10 +1400,8 @@
/* DDR network side */
window = MN_WIN(addr);
adapter->ahw.ddr_mn_window = window;
- NXWR32(adapter, adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
- window);
- win_read = NXRD32(adapter,
- adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE);
+ NXWR32(adapter, adapter->ahw.mn_win_crb, window);
+ win_read = NXRD32(adapter, adapter->ahw.mn_win_crb);
if ((win_read << 17) != window) {
printk(KERN_INFO "Written MNwin (0x%x) != "
"Read MNwin (0x%x)\n", window, win_read);
@@ -1215,10 +1416,8 @@
window = OCM_WIN(addr);
adapter->ahw.ddr_mn_window = window;
- NXWR32(adapter, adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
- window);
- win_read = NXRD32(adapter,
- adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE);
+ NXWR32(adapter, adapter->ahw.mn_win_crb, window);
+ win_read = NXRD32(adapter, adapter->ahw.mn_win_crb);
if ((win_read >> 7) != window) {
printk(KERN_INFO "%s: Written OCMwin (0x%x) != "
"Read OCMwin (0x%x)\n",
@@ -1231,10 +1430,8 @@
/* QDR network side */
window = MS_WIN(addr);
adapter->ahw.qdr_sn_window = window;
- NXWR32(adapter, adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
- window);
- win_read = NXRD32(adapter,
- adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE);
+ NXWR32(adapter, adapter->ahw.ms_win_crb, window);
+ win_read = NXRD32(adapter, adapter->ahw.ms_win_crb);
if (win_read != window) {
printk(KERN_INFO "%s: Written MSwin (0x%x) != "
"Read MSwin (0x%x)\n",
@@ -1257,180 +1454,9 @@
return addr;
}
-static int netxen_nic_pci_is_same_window(struct netxen_adapter *adapter,
- unsigned long long addr)
-{
- int window;
- unsigned long long qdr_max;
-
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
- qdr_max = NETXEN_ADDR_QDR_NET_MAX_P2;
- else
- qdr_max = NETXEN_ADDR_QDR_NET_MAX_P3;
-
- if (ADDR_IN_RANGE(addr,
- NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
- /* DDR network side */
- BUG(); /* MN access can not come here */
- } else if (ADDR_IN_RANGE(addr,
- NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
- return 1;
- } else if (ADDR_IN_RANGE(addr,
- NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
- return 1;
- } else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_QDR_NET, qdr_max)) {
- /* QDR network side */
- window = ((addr - NETXEN_ADDR_QDR_NET) >> 22) & 0x3f;
- if (adapter->ahw.qdr_sn_window == window)
- return 1;
- }
-
- return 0;
-}
-
-static int netxen_nic_pci_mem_read_direct(struct netxen_adapter *adapter,
- u64 off, void *data, int size)
-{
- unsigned long flags;
- void __iomem *addr, *mem_ptr = NULL;
- int ret = 0;
- u64 start;
- unsigned long mem_base;
- unsigned long mem_page;
-
- write_lock_irqsave(&adapter->adapter_lock, flags);
-
- /*
- * If attempting to access unknown address or straddle hw windows,
- * do not access.
- */
- start = adapter->pci_set_window(adapter, off);
- if ((start == -1UL) ||
- (netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
- printk(KERN_ERR "%s out of bound pci memory access. "
- "offset is 0x%llx\n", netxen_nic_driver_name,
- (unsigned long long)off);
- return -1;
- }
-
- addr = pci_base_offset(adapter, start);
- if (!addr) {
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
- mem_base = pci_resource_start(adapter->pdev, 0);
- mem_page = start & PAGE_MASK;
- /* Map two pages whenever user tries to access addresses in two
- consecutive pages.
- */
- if (mem_page != ((start + size - 1) & PAGE_MASK))
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
- else
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == NULL) {
- *(uint8_t *)data = 0;
- return -1;
- }
- addr = mem_ptr;
- addr += start & (PAGE_SIZE - 1);
- write_lock_irqsave(&adapter->adapter_lock, flags);
- }
-
- switch (size) {
- case 1:
- *(uint8_t *)data = readb(addr);
- break;
- case 2:
- *(uint16_t *)data = readw(addr);
- break;
- case 4:
- *(uint32_t *)data = readl(addr);
- break;
- case 8:
- *(uint64_t *)data = readq(addr);
- break;
- default:
- ret = -1;
- break;
- }
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
-
- if (mem_ptr)
- iounmap(mem_ptr);
- return ret;
-}
-
-static int
-netxen_nic_pci_mem_write_direct(struct netxen_adapter *adapter, u64 off,
- void *data, int size)
-{
- unsigned long flags;
- void __iomem *addr, *mem_ptr = NULL;
- int ret = 0;
- u64 start;
- unsigned long mem_base;
- unsigned long mem_page;
-
- write_lock_irqsave(&adapter->adapter_lock, flags);
-
- /*
- * If attempting to access unknown address or straddle hw windows,
- * do not access.
- */
- start = adapter->pci_set_window(adapter, off);
- if ((start == -1UL) ||
- (netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
- printk(KERN_ERR "%s out of bound pci memory access. "
- "offset is 0x%llx\n", netxen_nic_driver_name,
- (unsigned long long)off);
- return -1;
- }
-
- addr = pci_base_offset(adapter, start);
- if (!addr) {
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
- mem_base = pci_resource_start(adapter->pdev, 0);
- mem_page = start & PAGE_MASK;
- /* Map two pages whenever user tries to access addresses in two
- * consecutive pages.
- */
- if (mem_page != ((start + size - 1) & PAGE_MASK))
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2);
- else
- mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
- if (mem_ptr == NULL)
- return -1;
- addr = mem_ptr;
- addr += start & (PAGE_SIZE - 1);
- write_lock_irqsave(&adapter->adapter_lock, flags);
- }
-
- switch (size) {
- case 1:
- writeb(*(uint8_t *)data, addr);
- break;
- case 2:
- writew(*(uint16_t *)data, addr);
- break;
- case 4:
- writel(*(uint32_t *)data, addr);
- break;
- case 8:
- writeq(*(uint64_t *)data, addr);
- break;
- default:
- ret = -1;
- break;
- }
- write_unlock_irqrestore(&adapter->adapter_lock, flags);
- if (mem_ptr)
- iounmap(mem_ptr);
- return ret;
-}
-
#define MAX_CTL_CHECK 1000
-int
+static int
netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
u64 off, void *data, int size)
{
@@ -1440,19 +1466,28 @@
uint64_t off8, tmpw, word[2] = {0, 0};
void __iomem *mem_crb;
- /*
- * If not MN, go check for MS or invalid.
- */
- if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
- return netxen_nic_pci_mem_write_direct(adapter,
- off, data, size);
+ if (size != 8)
+ return -EIO;
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
+ NETXEN_ADDR_QDR_NET_MAX_P2)) {
+ mem_crb = pci_base_offset(adapter, NETXEN_CRB_QDR_NET);
+ goto correct;
+ }
+
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
+ mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+ goto correct;
+ }
+
+ return -EIO;
+
+correct:
off8 = off & 0xfffffff8;
off0 = off & 0x7;
sz[0] = (size < (8 - off0)) ? size : (8 - off0);
sz[1] = size - sz[0];
loop = ((off0 + size - 1) >> 3) + 1;
- mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
if ((size != 8) || (off0 != 0)) {
for (i = 0; i < loop; i++) {
@@ -1523,7 +1558,7 @@
return ret;
}
-int
+static int
netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
u64 off, void *data, int size)
{
@@ -1533,20 +1568,29 @@
uint64_t off8, val, word[2] = {0, 0};
void __iomem *mem_crb;
+ if (size != 8)
+ return -EIO;
- /*
- * If not MN, go check for MS or invalid.
- */
- if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
- return netxen_nic_pci_mem_read_direct(adapter, off, data, size);
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
+ NETXEN_ADDR_QDR_NET_MAX_P2)) {
+ mem_crb = pci_base_offset(adapter, NETXEN_CRB_QDR_NET);
+ goto correct;
+ }
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
+ mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+ goto correct;
+ }
+
+ return -EIO;
+
+correct:
off8 = off & 0xfffffff8;
off0[0] = off & 0x7;
off0[1] = 0;
sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
sz[1] = size - sz[0];
loop = ((off0[0] + size - 1) >> 3) + 1;
- mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
write_lock_irqsave(&adapter->adapter_lock, flags);
netxen_nic_pci_change_crbwindow_128M(adapter, 0);
@@ -1614,26 +1658,32 @@
return 0;
}
-int
+static int
netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
u64 off, void *data, int size)
{
int i, j, ret = 0, loop, sz[2], off0;
uint32_t temp;
- uint64_t off8, mem_crb, tmpw, word[2] = {0, 0};
+ uint64_t off8, tmpw, word[2] = {0, 0};
+ void __iomem *mem_crb;
- /*
- * If not MN, go check for MS or invalid.
- */
- if (off >= NETXEN_ADDR_QDR_NET && off <= NETXEN_ADDR_QDR_NET_MAX_P3)
- mem_crb = NETXEN_CRB_QDR_NET;
- else {
- mem_crb = NETXEN_CRB_DDR_NET;
- if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
- return netxen_nic_pci_mem_write_direct(adapter,
- off, data, size);
+ if (size != 8)
+ return -EIO;
+
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
+ NETXEN_ADDR_QDR_NET_MAX_P3)) {
+ mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_QDR_NET);
+ goto correct;
}
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
+ mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_DDR_NET);
+ goto correct;
+ }
+
+ return -EIO;
+
+correct:
off8 = off & 0xfffffff8;
off0 = off & 0x7;
sz[0] = (size < (8 - off0)) ? size : (8 - off0);
@@ -1642,8 +1692,8 @@
if ((size != 8) || (off0 != 0)) {
for (i = 0; i < loop; i++) {
- if (adapter->pci_mem_read(adapter, off8 + (i << 3),
- &word[i], 8))
+ if (adapter->pci_mem_read(adapter,
+ off8 + (i << 3), &word[i], 8))
return -1;
}
}
@@ -1679,21 +1729,18 @@
*/
for (i = 0; i < loop; i++) {
- temp = off8 + (i << 3);
- NXWR32(adapter, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
- temp = 0;
- NXWR32(adapter, mem_crb+MIU_TEST_AGT_ADDR_HI, temp);
- temp = word[i] & 0xffffffff;
- NXWR32(adapter, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp);
- temp = (word[i] >> 32) & 0xffffffff;
- NXWR32(adapter, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp);
- temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
- NXWR32(adapter, mem_crb+MIU_TEST_AGT_CTRL, temp);
- temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
- NXWR32(adapter, mem_crb+MIU_TEST_AGT_CTRL, temp);
+ writel(off8 + (i << 3), mem_crb+MIU_TEST_AGT_ADDR_LO);
+ writel(0, mem_crb+MIU_TEST_AGT_ADDR_HI);
+ writel(word[i] & 0xffffffff, mem_crb+MIU_TEST_AGT_WRDATA_LO);
+ writel((word[i] >> 32) & 0xffffffff,
+ mem_crb+MIU_TEST_AGT_WRDATA_HI);
+ writel((MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE),
+ mem_crb+MIU_TEST_AGT_CTRL);
+ writel(MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE,
+ mem_crb+MIU_TEST_AGT_CTRL);
for (j = 0; j < MAX_CTL_CHECK; j++) {
- temp = NXRD32(adapter, mem_crb + MIU_TEST_AGT_CTRL);
+ temp = readl(mem_crb + MIU_TEST_AGT_CTRL);
if ((temp & MIU_TA_CTL_BUSY) == 0)
break;
}
@@ -1714,27 +1761,32 @@
return ret;
}
-int
+static int
netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
u64 off, void *data, int size)
{
int i, j = 0, k, start, end, loop, sz[2], off0[2];
uint32_t temp;
- uint64_t off8, val, mem_crb, word[2] = {0, 0};
+ uint64_t off8, val, word[2] = {0, 0};
+ void __iomem *mem_crb;
- /*
- * If not MN, go check for MS or invalid.
- */
+ if (size != 8)
+ return -EIO;
- if (off >= NETXEN_ADDR_QDR_NET && off <= NETXEN_ADDR_QDR_NET_MAX_P3)
- mem_crb = NETXEN_CRB_QDR_NET;
- else {
- mem_crb = NETXEN_CRB_DDR_NET;
- if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
- return netxen_nic_pci_mem_read_direct(adapter,
- off, data, size);
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
+ NETXEN_ADDR_QDR_NET_MAX_P3)) {
+ mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_QDR_NET);
+ goto correct;
}
+ if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
+ mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_DDR_NET);
+ goto correct;
+ }
+
+ return -EIO;
+
+correct:
off8 = off & 0xfffffff8;
off0[0] = off & 0x7;
off0[1] = 0;
@@ -1749,17 +1801,14 @@
*/
for (i = 0; i < loop; i++) {
- temp = off8 + (i << 3);
- NXWR32(adapter, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
- temp = 0;
- NXWR32(adapter, mem_crb + MIU_TEST_AGT_ADDR_HI, temp);
- temp = MIU_TA_CTL_ENABLE;
- NXWR32(adapter, mem_crb + MIU_TEST_AGT_CTRL, temp);
- temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE;
- NXWR32(adapter, mem_crb + MIU_TEST_AGT_CTRL, temp);
+ writel(off8 + (i << 3), mem_crb + MIU_TEST_AGT_ADDR_LO);
+ writel(0, mem_crb + MIU_TEST_AGT_ADDR_HI);
+ writel(MIU_TA_CTL_ENABLE, mem_crb + MIU_TEST_AGT_CTRL);
+ writel(MIU_TA_CTL_START | MIU_TA_CTL_ENABLE,
+ mem_crb + MIU_TEST_AGT_CTRL);
for (j = 0; j < MAX_CTL_CHECK; j++) {
- temp = NXRD32(adapter, mem_crb + MIU_TEST_AGT_CTRL);
+ temp = readl(mem_crb + MIU_TEST_AGT_CTRL);
if ((temp & MIU_TA_CTL_BUSY) == 0)
break;
}
@@ -1774,8 +1823,7 @@
start = off0[i] >> 2;
end = (off0[i] + sz[i] - 1) >> 2;
for (k = start; k <= end; k++) {
- temp = NXRD32(adapter,
- mem_crb + MIU_TEST_AGT_RDDATA(k));
+ temp = readl(mem_crb + MIU_TEST_AGT_RDDATA(k));
word[i] |= ((uint64_t)temp << (32 * k));
}
}
@@ -1812,20 +1860,43 @@
return 0;
}
-/*
- * Note : only 32-bit writes!
- */
-int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
- u64 off, u32 data)
+void
+netxen_setup_hwops(struct netxen_adapter *adapter)
{
- NXWR32(adapter, off, data);
+ adapter->init_port = netxen_niu_xg_init_port;
+ adapter->stop_port = netxen_niu_disable_xg_port;
- return 0;
-}
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ adapter->crb_read = netxen_nic_hw_read_wx_128M,
+ adapter->crb_write = netxen_nic_hw_write_wx_128M,
+ adapter->pci_set_window = netxen_nic_pci_set_window_128M,
+ adapter->pci_mem_read = netxen_nic_pci_mem_read_128M,
+ adapter->pci_mem_write = netxen_nic_pci_mem_write_128M,
+ adapter->io_read = netxen_nic_io_read_128M,
+ adapter->io_write = netxen_nic_io_write_128M,
-u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off)
-{
- return NXRD32(adapter, off);
+ adapter->macaddr_set = netxen_p2_nic_set_mac_addr;
+ adapter->set_multi = netxen_p2_nic_set_multi;
+ adapter->set_mtu = netxen_nic_set_mtu_xgb;
+ adapter->set_promisc = netxen_p2_nic_set_promisc;
+
+ } else {
+ adapter->crb_read = netxen_nic_hw_read_wx_2M,
+ adapter->crb_write = netxen_nic_hw_write_wx_2M,
+ adapter->pci_set_window = netxen_nic_pci_set_window_2M,
+ adapter->pci_mem_read = netxen_nic_pci_mem_read_2M,
+ adapter->pci_mem_write = netxen_nic_pci_mem_write_2M,
+ adapter->io_read = netxen_nic_io_read_2M,
+ adapter->io_write = netxen_nic_io_write_2M,
+
+ adapter->set_mtu = nx_fw_cmd_set_mtu;
+ adapter->set_promisc = netxen_p3_nic_set_promisc;
+ adapter->macaddr_set = netxen_p3_nic_set_mac_addr;
+ adapter->set_multi = netxen_p3_nic_set_multi;
+
+ adapter->phy_read = nx_fw_cmd_query_phy;
+ adapter->phy_write = nx_fw_cmd_set_phy;
+ }
}
int netxen_nic_get_board_info(struct netxen_adapter *adapter)
@@ -1833,13 +1904,11 @@
int offset, board_type, magic, header_version;
struct pci_dev *pdev = adapter->pdev;
- offset = NETXEN_BRDCFG_START +
- offsetof(struct netxen_board_info, magic);
+ offset = NX_FW_MAGIC_OFFSET;
if (netxen_rom_fast_read(adapter, offset, &magic))
return -EIO;
- offset = NETXEN_BRDCFG_START +
- offsetof(struct netxen_board_info, header_version);
+ offset = NX_HDR_VERSION_OFFSET;
if (netxen_rom_fast_read(adapter, offset, &header_version))
return -EIO;
@@ -1851,8 +1920,7 @@
return -EIO;
}
- offset = NETXEN_BRDCFG_START +
- offsetof(struct netxen_board_info, board_type);
+ offset = NX_BRDTYPE_OFFSET;
if (netxen_rom_fast_read(adapter, offset, &board_type))
return -EIO;
@@ -1993,62 +2061,6 @@
}
}
-void netxen_nic_get_firmware_info(struct netxen_adapter *adapter)
-{
- u32 fw_major, fw_minor, fw_build;
- char brd_name[NETXEN_MAX_SHORT_NAME];
- char serial_num[32];
- int i, addr, val;
- int *ptr32;
- struct pci_dev *pdev = adapter->pdev;
-
- adapter->driver_mismatch = 0;
-
- ptr32 = (int *)&serial_num;
- addr = NETXEN_USER_START +
- offsetof(struct netxen_new_user_info, serial_num);
- for (i = 0; i < 8; i++) {
- if (netxen_rom_fast_read(adapter, addr, &val) == -1) {
- dev_err(&pdev->dev, "error reading board info\n");
- adapter->driver_mismatch = 1;
- return;
- }
- ptr32[i] = cpu_to_le32(val);
- addr += sizeof(u32);
- }
-
- fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
- fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
- fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
-
- adapter->fw_major = fw_major;
- adapter->fw_version = NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build);
-
- if (adapter->portnum == 0) {
- get_brd_name_by_type(adapter->ahw.board_type, brd_name);
-
- printk(KERN_INFO "NetXen %s Board S/N %s Chip rev 0x%x\n",
- brd_name, serial_num, adapter->ahw.revision_id);
- }
-
- if (adapter->fw_version < NETXEN_VERSION_CODE(3, 4, 216)) {
- adapter->driver_mismatch = 1;
- dev_warn(&pdev->dev, "firmware version %d.%d.%d unsupported\n",
- fw_major, fw_minor, fw_build);
- return;
- }
-
- dev_info(&pdev->dev, "firmware version %d.%d.%d\n",
- fw_major, fw_minor, fw_build);
-
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
- i = NXRD32(adapter, NETXEN_SRE_MISC);
- adapter->ahw.cut_through = (i & 0x8000) ? 1 : 0;
- dev_info(&pdev->dev, "firmware running in %s mode\n",
- adapter->ahw.cut_through ? "cut-through" : "legacy");
- }
-}
-
int
netxen_nic_wol_supported(struct netxen_adapter *adapter)
{
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index d4e8333..3fd1dcb 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,19 +21,11 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#ifndef __NETXEN_NIC_HW_H_
#define __NETXEN_NIC_HW_H_
-#include "netxen_nic_hdr.h"
-
/* Hardware memory size of 128 meg */
#define NETXEN_MEMADDR_MAX (128 * 1024 * 1024)
@@ -63,10 +56,6 @@
* Bit 31: soft_reset => 1:reset the MAC and the SERDES, 0:no-op
*/
-#define netxen_gb_enable_tx(config_word) \
- ((config_word) |= 1 << 0)
-#define netxen_gb_enable_rx(config_word) \
- ((config_word) |= 1 << 2)
#define netxen_gb_tx_flowctl(config_word) \
((config_word) |= 1 << 4)
#define netxen_gb_rx_flowctl(config_word) \
@@ -79,8 +68,6 @@
((config_word) |= 1 << 18)
#define netxen_gb_rx_reset_mac(config_word) \
((config_word) |= 1 << 19)
-#define netxen_gb_soft_reset(config_word) \
- ((config_word) |= 1 << 31)
#define netxen_gb_unset_tx_flowctl(config_word) \
((config_word) &= ~(1 << 4))
@@ -242,7 +229,6 @@
* Bits 14-15 : speed => 0:10Mb/s, 1:100Mb/s, 2:1000Mb/s, 3:rsvd
*/
-#define netxen_get_phy_cablelen(config_word) (((config_word) >> 7) & 0x07)
#define netxen_get_phy_speed(config_word) (((config_word) >> 14) & 0x03)
#define netxen_set_phy_speed(config_word, val) \
@@ -252,85 +238,12 @@
#define netxen_clear_phy_duplex(config_word) \
((config_word) &= ~(1 << 13))
-#define netxen_get_phy_jabber(config_word) \
- _netxen_crb_get_bit(config_word, 0)
-#define netxen_get_phy_polarity(config_word) \
- _netxen_crb_get_bit(config_word, 1)
-#define netxen_get_phy_recvpause(config_word) \
- _netxen_crb_get_bit(config_word, 2)
-#define netxen_get_phy_xmitpause(config_word) \
- _netxen_crb_get_bit(config_word, 3)
-#define netxen_get_phy_energydetect(config_word) \
- _netxen_crb_get_bit(config_word, 4)
-#define netxen_get_phy_downshift(config_word) \
- _netxen_crb_get_bit(config_word, 5)
-#define netxen_get_phy_crossover(config_word) \
- _netxen_crb_get_bit(config_word, 6)
#define netxen_get_phy_link(config_word) \
_netxen_crb_get_bit(config_word, 10)
-#define netxen_get_phy_resolved(config_word) \
- _netxen_crb_get_bit(config_word, 11)
-#define netxen_get_phy_pagercvd(config_word) \
- _netxen_crb_get_bit(config_word, 12)
#define netxen_get_phy_duplex(config_word) \
_netxen_crb_get_bit(config_word, 13)
/*
- * Interrupt Register definition
- * This definition applies to registers 18 and 19 (int enable and int status).
- * Bit 0 : jabber
- * Bit 1 : polarity_changed
- * Bit 4 : energy_detect
- * Bit 5 : downshift
- * Bit 6 : mdi_xover_changed
- * Bit 7 : fifo_over_underflow
- * Bit 8 : false_carrier
- * Bit 9 : symbol_error
- * Bit 10: link_status_changed
- * Bit 11: autoneg_completed
- * Bit 12: page_received
- * Bit 13: duplex_changed
- * Bit 14: speed_changed
- * Bit 15: autoneg_error
- */
-
-#define netxen_get_phy_int_jabber(config_word) \
- _netxen_crb_get_bit(config_word, 0)
-#define netxen_get_phy_int_polarity_changed(config_word) \
- _netxen_crb_get_bit(config_word, 1)
-#define netxen_get_phy_int_energy_detect(config_word) \
- _netxen_crb_get_bit(config_word, 4)
-#define netxen_get_phy_int_downshift(config_word) \
- _netxen_crb_get_bit(config_word, 5)
-#define netxen_get_phy_int_mdi_xover_changed(config_word) \
- _netxen_crb_get_bit(config_word, 6)
-#define netxen_get_phy_int_fifo_over_underflow(config_word) \
- _netxen_crb_get_bit(config_word, 7)
-#define netxen_get_phy_int_false_carrier(config_word) \
- _netxen_crb_get_bit(config_word, 8)
-#define netxen_get_phy_int_symbol_error(config_word) \
- _netxen_crb_get_bit(config_word, 9)
-#define netxen_get_phy_int_link_status_changed(config_word) \
- _netxen_crb_get_bit(config_word, 10)
-#define netxen_get_phy_int_autoneg_completed(config_word) \
- _netxen_crb_get_bit(config_word, 11)
-#define netxen_get_phy_int_page_received(config_word) \
- _netxen_crb_get_bit(config_word, 12)
-#define netxen_get_phy_int_duplex_changed(config_word) \
- _netxen_crb_get_bit(config_word, 13)
-#define netxen_get_phy_int_speed_changed(config_word) \
- _netxen_crb_get_bit(config_word, 14)
-#define netxen_get_phy_int_autoneg_error(config_word) \
- _netxen_crb_get_bit(config_word, 15)
-
-#define netxen_set_phy_int_link_status_changed(config_word) \
- ((config_word) |= 1 << 10)
-#define netxen_set_phy_int_autoneg_completed(config_word) \
- ((config_word) |= 1 << 11)
-#define netxen_set_phy_int_speed_changed(config_word) \
- ((config_word) |= 1 << 14)
-
-/*
* NIU Mode Register.
* Bit 0 : enable FibreChannel
* Bit 1 : enable 10/100/1000 Ethernet
@@ -345,33 +258,6 @@
#define NETXEN_NIU_ALLMULTI_MODE 2
/*
- * NIU GB Drop CRC Register
- *
- * Bit 0 : drop_gb0 => 1:drop pkts with bad CRCs, 0:pass them on
- * Bit 1 : drop_gb1 => 1:drop pkts with bad CRCs, 0:pass them on
- * Bit 2 : drop_gb2 => 1:drop pkts with bad CRCs, 0:pass them on
- * Bit 3 : drop_gb3 => 1:drop pkts with bad CRCs, 0:pass them on
- */
-
-#define netxen_set_gb_drop_gb0(config_word) \
- ((config_word) |= 1 << 0)
-#define netxen_set_gb_drop_gb1(config_word) \
- ((config_word) |= 1 << 1)
-#define netxen_set_gb_drop_gb2(config_word) \
- ((config_word) |= 1 << 2)
-#define netxen_set_gb_drop_gb3(config_word) \
- ((config_word) |= 1 << 3)
-
-#define netxen_clear_gb_drop_gb0(config_word) \
- ((config_word) &= ~(1 << 0))
-#define netxen_clear_gb_drop_gb1(config_word) \
- ((config_word) &= ~(1 << 1))
-#define netxen_clear_gb_drop_gb2(config_word) \
- ((config_word) &= ~(1 << 2))
-#define netxen_clear_gb_drop_gb3(config_word) \
- ((config_word) &= ~(1 << 3))
-
-/*
* NIU XG MAC Config Register
*
* Bit 0 : tx_enable => 1:enable frame xmit, 0:disable
@@ -387,22 +273,6 @@
#define netxen_xg_soft_reset(config_word) \
((config_word) |= 1 << 4)
-/* Set promiscuous mode for a GbE interface */
-int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
- u32 mode);
-int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
- u32 mode);
-
-/* Generic enable for GbE ports. Will detect the speed of the link. */
-int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port);
-
-int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port);
-
-/* Disable a GbE interface */
-int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter);
-
-int netxen_niu_disable_xg_port(struct netxen_adapter *adapter);
-
typedef struct {
unsigned valid;
unsigned start_128M;
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 5d3343e..91c2bc6 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,19 +21,12 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#include <linux/netdevice.h>
#include <linux/delay.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
-#include "netxen_nic_phan_reg.h"
struct crb_addr_pair {
u32 addr;
@@ -247,9 +241,14 @@
rds_ring->skb_size =
NX_CT_DEFAULT_RX_BUF_LEN;
} else {
- rds_ring->dma_size = RX_DMA_MAP_LEN;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ rds_ring->dma_size =
+ NX_P3_RX_BUF_MAX_LEN;
+ else
+ rds_ring->dma_size =
+ NX_P2_RX_BUF_MAX_LEN;
rds_ring->skb_size =
- MAX_RX_BUFFER_LENGTH;
+ rds_ring->dma_size + NET_IP_ALIGN;
}
break;
@@ -261,14 +260,18 @@
else
rds_ring->dma_size =
NX_P2_RX_JUMBO_BUF_MAX_LEN;
+
+ if (adapter->capabilities & NX_CAP0_HW_LRO)
+ rds_ring->dma_size += NX_LRO_BUFFER_EXTRA;
+
rds_ring->skb_size =
rds_ring->dma_size + NET_IP_ALIGN;
break;
case RCV_RING_LRO:
rds_ring->num_desc = adapter->num_lro_rxd;
- rds_ring->dma_size = RX_LRO_DMA_MAP_LEN;
- rds_ring->skb_size = MAX_RX_LRO_BUFFER_LENGTH;
+ rds_ring->dma_size = NX_RX_LRO_BUFFER_LENGTH;
+ rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN;
break;
}
@@ -315,48 +318,6 @@
return -ENOMEM;
}
-void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
-{
- adapter->macaddr_set = netxen_p2_nic_set_mac_addr;
- adapter->set_multi = netxen_p2_nic_set_multi;
-
- switch (adapter->ahw.port_type) {
- case NETXEN_NIC_GBE:
- adapter->enable_phy_interrupts =
- netxen_niu_gbe_enable_phy_interrupts;
- adapter->disable_phy_interrupts =
- netxen_niu_gbe_disable_phy_interrupts;
- adapter->set_mtu = netxen_nic_set_mtu_gb;
- adapter->set_promisc = netxen_niu_set_promiscuous_mode;
- adapter->phy_read = netxen_niu_gbe_phy_read;
- adapter->phy_write = netxen_niu_gbe_phy_write;
- adapter->init_port = netxen_niu_gbe_init_port;
- adapter->stop_port = netxen_niu_disable_gbe_port;
- break;
-
- case NETXEN_NIC_XGBE:
- adapter->enable_phy_interrupts =
- netxen_niu_xgbe_enable_phy_interrupts;
- adapter->disable_phy_interrupts =
- netxen_niu_xgbe_disable_phy_interrupts;
- adapter->set_mtu = netxen_nic_set_mtu_xgb;
- adapter->init_port = netxen_niu_xg_init_port;
- adapter->set_promisc = netxen_niu_xg_set_promiscuous_mode;
- adapter->stop_port = netxen_niu_disable_xg_port;
- break;
-
- default:
- break;
- }
-
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
- adapter->set_mtu = nx_fw_cmd_set_mtu;
- adapter->set_promisc = netxen_p3_nic_set_promisc;
- adapter->macaddr_set = netxen_p3_nic_set_mac_addr;
- adapter->set_multi = netxen_p3_nic_set_multi;
- }
-}
-
/*
* netxen_decode_crb_addr(0 - utility to translate from internal Phantom CRB
* address to external PCI CRB address.
@@ -384,37 +345,7 @@
return (pci_base + offset);
}
-static long rom_max_timeout = 100;
-static long rom_lock_timeout = 10000;
-
-static int rom_lock(struct netxen_adapter *adapter)
-{
- int iter;
- u32 done = 0;
- int timeout = 0;
-
- while (!done) {
- /* acquire semaphore2 from PCI HW block */
- done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM2_LOCK));
- if (done == 1)
- break;
- if (timeout >= rom_lock_timeout)
- return -EIO;
-
- timeout++;
- /*
- * Yield CPU
- */
- if (!in_atomic())
- schedule();
- else {
- for (iter = 0; iter < 20; iter++)
- cpu_relax(); /*This a nop instr on i386 */
- }
- }
- NXWR32(adapter, NETXEN_ROM_LOCK_ID, ROM_LOCK_DRIVER);
- return 0;
-}
+#define NETXEN_MAX_ROM_WAIT_USEC 100
static int netxen_wait_rom_done(struct netxen_adapter *adapter)
{
@@ -426,22 +357,16 @@
while (done == 0) {
done = NXRD32(adapter, NETXEN_ROMUSB_GLB_STATUS);
done &= 2;
- timeout++;
- if (timeout >= rom_max_timeout) {
- printk("Timeout reached waiting for rom done");
+ if (++timeout >= NETXEN_MAX_ROM_WAIT_USEC) {
+ dev_err(&adapter->pdev->dev,
+ "Timeout reached waiting for rom done");
return -EIO;
}
+ udelay(1);
}
return 0;
}
-static void netxen_rom_unlock(struct netxen_adapter *adapter)
-{
- /* release semaphore2 */
- NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM2_UNLOCK));
-
-}
-
static int do_rom_fast_read(struct netxen_adapter *adapter,
int addr, int *valp)
{
@@ -486,7 +411,7 @@
{
int ret;
- ret = rom_lock(adapter);
+ ret = netxen_rom_lock(adapter);
if (ret < 0)
return ret;
@@ -500,7 +425,7 @@
{
int ret;
- if (rom_lock(adapter) != 0)
+ if (netxen_rom_lock(adapter) != 0)
return -EIO;
ret = do_rom_fast_read(adapter, addr, valp);
@@ -521,7 +446,7 @@
u32 off;
/* resetall */
- rom_lock(adapter);
+ netxen_rom_lock(adapter);
NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
netxen_rom_unlock(adapter);
@@ -797,21 +722,28 @@
flashaddr += 8;
}
} else {
- u32 data;
+ u64 data;
+ u32 hi, lo;
- size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 4;
+ size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
flashaddr = NETXEN_BOOTLD_START;
for (i = 0; i < size; i++) {
if (netxen_rom_fast_read(adapter,
- flashaddr, (int *)&data) != 0)
+ flashaddr, &lo) != 0)
return -EIO;
+ if (netxen_rom_fast_read(adapter,
+ flashaddr + 4, &hi) != 0)
+ return -EIO;
+
+ /* hi, lo are already in host endian byteorder */
+ data = (((u64)hi << 32) | lo);
if (adapter->pci_mem_write(adapter,
- flashaddr, &data, 4))
+ flashaddr, &data, 8))
return -EIO;
- flashaddr += 4;
+ flashaddr += 8;
}
}
msleep(1);
@@ -880,22 +812,10 @@
return 0;
}
-void netxen_request_firmware(struct netxen_adapter *adapter)
+static int
+netxen_p3_has_mn(struct netxen_adapter *adapter)
{
u32 capability, flashed_ver;
- u8 fw_type;
- struct pci_dev *pdev = adapter->pdev;
- int rc = 0;
-
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
- fw_type = NX_P2_MN_ROMIMAGE;
- goto request_fw;
- } else {
- fw_type = NX_P3_CT_ROMIMAGE;
- goto request_fw;
- }
-
-request_mn:
capability = 0;
netxen_rom_fast_read(adapter,
@@ -903,23 +823,35 @@
flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
+
capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
- if (capability & NX_PEG_TUNE_MN_PRESENT) {
- fw_type = NX_P3_MN_ROMIMAGE;
- goto request_fw;
- }
+ if (capability & NX_PEG_TUNE_MN_PRESENT)
+ return 1;
+ }
+ return 0;
+}
+
+void netxen_request_firmware(struct netxen_adapter *adapter)
+{
+ u8 fw_type;
+ struct pci_dev *pdev = adapter->pdev;
+ int rc = 0;
+
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ fw_type = NX_P2_MN_ROMIMAGE;
+ goto request_fw;
}
- fw_type = NX_FLASH_ROMIMAGE;
- adapter->fw = NULL;
- goto done;
+ fw_type = netxen_p3_has_mn(adapter) ?
+ NX_P3_MN_ROMIMAGE : NX_P3_CT_ROMIMAGE;
request_fw:
rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
if (rc != 0) {
- if (fw_type == NX_P3_CT_ROMIMAGE) {
+ if (fw_type == NX_P3_MN_ROMIMAGE) {
msleep(1);
- goto request_mn;
+ fw_type = NX_P3_CT_ROMIMAGE;
+ goto request_fw;
}
fw_type = NX_FLASH_ROMIMAGE;
@@ -931,9 +863,10 @@
if (rc != 0) {
release_firmware(adapter->fw);
- if (fw_type == NX_P3_CT_ROMIMAGE) {
+ if (fw_type == NX_P3_MN_ROMIMAGE) {
msleep(1);
- goto request_mn;
+ fw_type = NX_P3_CT_ROMIMAGE;
+ goto request_fw;
}
fw_type = NX_FLASH_ROMIMAGE;
@@ -951,21 +884,23 @@
{
if (adapter->fw)
release_firmware(adapter->fw);
+ adapter->fw = NULL;
}
-int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
+int netxen_init_dummy_dma(struct netxen_adapter *adapter)
{
- uint64_t addr;
- uint32_t hi;
- uint32_t lo;
+ u64 addr;
+ u32 hi, lo;
- adapter->dummy_dma.addr =
- pci_alloc_consistent(adapter->pdev,
+ if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 0;
+
+ adapter->dummy_dma.addr = pci_alloc_consistent(adapter->pdev,
NETXEN_HOST_DUMMY_DMA_SIZE,
&adapter->dummy_dma.phys_addr);
if (adapter->dummy_dma.addr == NULL) {
- printk("%s: ERROR: Could not allocate dummy DMA memory\n",
- __func__);
+ dev_err(&adapter->pdev->dev,
+ "ERROR: Could not allocate dummy DMA memory\n");
return -ENOMEM;
}
@@ -976,29 +911,41 @@
NXWR32(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
NXWR32(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
- uint32_t temp = 0;
- NXWR32(adapter, CRB_HOST_DUMMY_BUF, temp);
- }
-
return 0;
}
-void netxen_free_adapter_offload(struct netxen_adapter *adapter)
+/*
+ * NetXen DMA watchdog control:
+ *
+ * Bit 0 : enabled => R/O: 1 watchdog active, 0 inactive
+ * Bit 1 : disable_request => 1 req disable dma watchdog
+ * Bit 2 : enable_request => 1 req enable dma watchdog
+ * Bit 3-31 : unused
+ */
+void netxen_free_dummy_dma(struct netxen_adapter *adapter)
{
int i = 100;
+ u32 ctrl;
+
+ if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return;
if (!adapter->dummy_dma.addr)
return;
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
- do {
- if (dma_watchdog_shutdown_request(adapter) == 1)
- break;
+ ctrl = NXRD32(adapter, NETXEN_DMA_WATCHDOG_CTRL);
+ if ((ctrl & 0x1) != 0) {
+ NXWR32(adapter, NETXEN_DMA_WATCHDOG_CTRL, (ctrl | 0x2));
+
+ while ((ctrl & 0x1) != 0) {
+
msleep(50);
- if (dma_watchdog_shutdown_poll_result(adapter) == 1)
+
+ ctrl = NXRD32(adapter, NETXEN_DMA_WATCHDOG_CTRL);
+
+ if (--i == 0)
break;
- } while (--i);
+ };
}
if (i) {
@@ -1007,10 +954,8 @@
adapter->dummy_dma.addr,
adapter->dummy_dma.phys_addr);
adapter->dummy_dma.addr = NULL;
- } else {
- printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
- adapter->netdev->name);
- }
+ } else
+ dev_err(&adapter->pdev->dev, "dma_watchdog_shutdown failed\n");
}
int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
@@ -1083,10 +1028,6 @@
NXWR32(adapter, CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
NXWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
- if (adapter->fw_version >= NETXEN_VERSION_CODE(4, 0, 222)) {
- adapter->capabilities = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
- }
-
return err;
}
@@ -1222,20 +1163,31 @@
static struct netxen_rx_buffer *
netxen_process_rcv(struct netxen_adapter *adapter,
- int ring, int index, int length, int cksum, int pkt_offset,
- struct nx_host_sds_ring *sds_ring)
+ struct nx_host_sds_ring *sds_ring,
+ int ring, u64 sts_data0)
{
struct net_device *netdev = adapter->netdev;
struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
struct netxen_rx_buffer *buffer;
struct sk_buff *skb;
- struct nx_host_rds_ring *rds_ring = &recv_ctx->rds_rings[ring];
+ struct nx_host_rds_ring *rds_ring;
+ int index, length, cksum, pkt_offset;
- if (unlikely(index > rds_ring->num_desc))
+ if (unlikely(ring >= adapter->max_rds_rings))
+ return NULL;
+
+ rds_ring = &recv_ctx->rds_rings[ring];
+
+ index = netxen_get_sts_refhandle(sts_data0);
+ if (unlikely(index >= rds_ring->num_desc))
return NULL;
buffer = &rds_ring->rx_buf_arr[index];
+ length = netxen_get_sts_totallength(sts_data0);
+ cksum = netxen_get_sts_status(sts_data0);
+ pkt_offset = netxen_get_sts_pkt_offset(sts_data0);
+
skb = netxen_process_rxbuf(adapter, rds_ring, index, cksum);
if (!skb)
return buffer;
@@ -1249,11 +1201,88 @@
if (pkt_offset)
skb_pull(skb, pkt_offset);
+ skb->truesize = skb->len + sizeof(struct sk_buff);
skb->protocol = eth_type_trans(skb, netdev);
napi_gro_receive(&sds_ring->napi, skb);
- adapter->stats.no_rcv++;
+ adapter->stats.rx_pkts++;
+ adapter->stats.rxbytes += length;
+
+ return buffer;
+}
+
+#define TCP_HDR_SIZE 20
+#define TCP_TS_OPTION_SIZE 12
+#define TCP_TS_HDR_SIZE (TCP_HDR_SIZE + TCP_TS_OPTION_SIZE)
+
+static struct netxen_rx_buffer *
+netxen_process_lro(struct netxen_adapter *adapter,
+ struct nx_host_sds_ring *sds_ring,
+ int ring, u64 sts_data0, u64 sts_data1)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
+ struct netxen_rx_buffer *buffer;
+ struct sk_buff *skb;
+ struct nx_host_rds_ring *rds_ring;
+ struct iphdr *iph;
+ struct tcphdr *th;
+ bool push, timestamp;
+ int l2_hdr_offset, l4_hdr_offset;
+ int index;
+ u16 lro_length, length, data_offset;
+ u32 seq_number;
+
+ if (unlikely(ring > adapter->max_rds_rings))
+ return NULL;
+
+ rds_ring = &recv_ctx->rds_rings[ring];
+
+ index = netxen_get_lro_sts_refhandle(sts_data0);
+ if (unlikely(index > rds_ring->num_desc))
+ return NULL;
+
+ buffer = &rds_ring->rx_buf_arr[index];
+
+ timestamp = netxen_get_lro_sts_timestamp(sts_data0);
+ lro_length = netxen_get_lro_sts_length(sts_data0);
+ l2_hdr_offset = netxen_get_lro_sts_l2_hdr_offset(sts_data0);
+ l4_hdr_offset = netxen_get_lro_sts_l4_hdr_offset(sts_data0);
+ push = netxen_get_lro_sts_push_flag(sts_data0);
+ seq_number = netxen_get_lro_sts_seq_number(sts_data1);
+
+ skb = netxen_process_rxbuf(adapter, rds_ring, index, STATUS_CKSUM_OK);
+ if (!skb)
+ return buffer;
+
+ if (timestamp)
+ data_offset = l4_hdr_offset + TCP_TS_HDR_SIZE;
+ else
+ data_offset = l4_hdr_offset + TCP_HDR_SIZE;
+
+ skb_put(skb, lro_length + data_offset);
+
+ skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb);
+
+ skb_pull(skb, l2_hdr_offset);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ iph = (struct iphdr *)skb->data;
+ th = (struct tcphdr *)(skb->data + (iph->ihl << 2));
+
+ length = (iph->ihl << 2) + (th->doff << 2) + lro_length;
+ iph->tot_len = htons(length);
+ iph->check = 0;
+ iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
+ th->psh = push;
+ th->seq = htonl(seq_number);
+
+ length = skb->len;
+
+ netif_receive_skb(skb);
+
+ adapter->stats.lro_pkts++;
adapter->stats.rxbytes += length;
return buffer;
@@ -1275,27 +1304,33 @@
u32 consumer = sds_ring->consumer;
int count = 0;
- u64 sts_data;
- int opcode, ring, index, length, cksum, pkt_offset, desc_cnt;
+ u64 sts_data0, sts_data1;
+ int opcode, ring = 0, desc_cnt;
while (count < max) {
desc = &sds_ring->desc_head[consumer];
- sts_data = le64_to_cpu(desc->status_desc_data[0]);
+ sts_data0 = le64_to_cpu(desc->status_desc_data[0]);
- if (!(sts_data & STATUS_OWNER_HOST))
+ if (!(sts_data0 & STATUS_OWNER_HOST))
break;
- desc_cnt = netxen_get_sts_desc_cnt(sts_data);
- ring = netxen_get_sts_type(sts_data);
+ desc_cnt = netxen_get_sts_desc_cnt(sts_data0);
- if (ring > RCV_RING_JUMBO)
- goto skip;
-
- opcode = netxen_get_sts_opcode(sts_data);
+ opcode = netxen_get_sts_opcode(sts_data0);
switch (opcode) {
case NETXEN_NIC_RXPKT_DESC:
case NETXEN_OLD_RXPKT_DESC:
+ case NETXEN_NIC_SYN_OFFLOAD:
+ ring = netxen_get_sts_type(sts_data0);
+ rxbuf = netxen_process_rcv(adapter, sds_ring,
+ ring, sts_data0);
+ break;
+ case NETXEN_NIC_LRO_DESC:
+ ring = netxen_get_lro_sts_type(sts_data0);
+ sts_data1 = le64_to_cpu(desc->status_desc_data[1]);
+ rxbuf = netxen_process_lro(adapter, sds_ring,
+ ring, sts_data0, sts_data1);
break;
case NETXEN_NIC_RESPONSE_DESC:
netxen_handle_fw_message(desc_cnt, consumer, sds_ring);
@@ -1305,14 +1340,6 @@
WARN_ON(desc_cnt > 1);
- index = netxen_get_sts_refhandle(sts_data);
- length = netxen_get_sts_totallength(sts_data);
- cksum = netxen_get_sts_status(sts_data);
- pkt_offset = netxen_get_sts_pkt_offset(sts_data);
-
- rxbuf = netxen_process_rcv(adapter, ring, index,
- length, cksum, pkt_offset, sds_ring);
-
if (rxbuf)
list_add_tail(&rxbuf->list, &sds_ring->free_list[ring]);
@@ -1347,7 +1374,7 @@
if (count) {
sds_ring->consumer = consumer;
- NXWR32(adapter, sds_ring->crb_sts_consumer, consumer);
+ NXWRIO(adapter, sds_ring->crb_sts_consumer, consumer);
}
return count;
@@ -1402,8 +1429,10 @@
if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
__netif_tx_lock(tx_ring->txq, smp_processor_id());
- if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
+ if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH) {
netif_wake_queue(netdev);
+ adapter->tx_timeo_cnt = 0;
+ }
__netif_tx_unlock(tx_ring->txq);
}
}
@@ -1465,10 +1494,10 @@
if (count) {
rds_ring->producer = producer;
- NXWR32(adapter, rds_ring->crb_rcv_producer,
+ NXWRIO(adapter, rds_ring->crb_rcv_producer,
(producer-1) & (rds_ring->num_desc-1));
- if (adapter->fw_major < 4) {
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/*
* Write a doorbell msg to tell phanmon of change in
* receive ring producer
@@ -1481,9 +1510,10 @@
(rds_ring->num_desc - 1)));
netxen_set_msg_ctxid(msg, adapter->portnum);
netxen_set_msg_opcode(msg, NETXEN_RCV_PRODUCER(ringid));
- writel(msg,
- DB_NORMALIZE(adapter,
+ read_lock(&adapter->adapter_lock);
+ writel(msg, DB_NORMALIZE(adapter,
NETXEN_RCV_PRODUCER_OFFSET));
+ read_unlock(&adapter->adapter_lock);
}
}
}
@@ -1525,7 +1555,7 @@
if (count) {
rds_ring->producer = producer;
- NXWR32(adapter, rds_ring->crb_rcv_producer,
+ NXWRIO(adapter, rds_ring->crb_rcv_producer,
(producer - 1) & (rds_ring->num_desc - 1));
}
spin_unlock(&rds_ring->lock);
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 28f270f..f7bdde1 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003 - 2009 NetXen, Inc.
+ * Copyright (C) 2009 - QLogic Corporation.
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
@@ -20,12 +21,6 @@
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.
*
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
*/
#include <linux/vmalloc.h>
@@ -33,12 +28,12 @@
#include "netxen_nic_hw.h"
#include "netxen_nic.h"
-#include "netxen_nic_phan_reg.h"
#include <linux/dma-mapping.h>
#include <linux/if_vlan.h>
#include <net/ip.h>
#include <linux/ipv6.h>
+#include <linux/inetdevice.h>
MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
MODULE_LICENSE("GPL");
@@ -63,18 +58,31 @@
static void __devexit netxen_nic_remove(struct pci_dev *pdev);
static int netxen_nic_open(struct net_device *netdev);
static int netxen_nic_close(struct net_device *netdev);
-static int netxen_nic_xmit_frame(struct sk_buff *, struct net_device *);
+static netdev_tx_t netxen_nic_xmit_frame(struct sk_buff *,
+ struct net_device *);
static void netxen_tx_timeout(struct net_device *netdev);
static void netxen_tx_timeout_task(struct work_struct *work);
-static void netxen_watchdog(unsigned long);
+static void netxen_fw_poll_work(struct work_struct *work);
+static void netxen_schedule_work(struct netxen_adapter *adapter,
+ work_func_t func, int delay);
+static void netxen_cancel_fw_work(struct netxen_adapter *adapter);
static int netxen_nic_poll(struct napi_struct *napi, int budget);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void netxen_nic_poll_controller(struct net_device *netdev);
#endif
+
+static void netxen_create_sysfs_entries(struct netxen_adapter *adapter);
+static void netxen_remove_sysfs_entries(struct netxen_adapter *adapter);
+
+static int nx_decr_dev_ref_cnt(struct netxen_adapter *adapter);
+static int netxen_can_start_firmware(struct netxen_adapter *adapter);
+
static irqreturn_t netxen_intr(int irq, void *data);
static irqreturn_t netxen_msi_intr(int irq, void *data);
static irqreturn_t netxen_msix_intr(int irq, void *data);
+static void netxen_config_indev_addr(struct net_device *dev, unsigned long);
+
/* PCI Device ID Table */
#define ENTRY(device) \
{PCI_DEVICE(PCI_VENDOR_ID_NETXEN, (device)), \
@@ -94,8 +102,6 @@
MODULE_DEVICE_TABLE(pci, netxen_pci_tbl);
-static void netxen_watchdog(unsigned long);
-
static uint32_t crb_cmd_producer[4] = {
CRB_CMD_PRODUCER_OFFSET, CRB_CMD_PRODUCER_OFFSET_1,
CRB_CMD_PRODUCER_OFFSET_2, CRB_CMD_PRODUCER_OFFSET_3
@@ -105,7 +111,7 @@
netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
struct nx_host_tx_ring *tx_ring)
{
- NXWR32(adapter, tx_ring->crb_cmd_producer, tx_ring->producer);
+ NXWRIO(adapter, tx_ring->crb_cmd_producer, tx_ring->producer);
if (netxen_tx_avail(tx_ring) <= TX_STOP_THRESH) {
netif_stop_queue(adapter->netdev);
@@ -122,7 +128,7 @@
netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
struct nx_host_tx_ring *tx_ring)
{
- NXWR32(adapter, tx_ring->crb_cmd_consumer, tx_ring->sw_consumer);
+ NXWRIO(adapter, tx_ring->crb_cmd_consumer, tx_ring->sw_consumer);
}
static uint32_t msi_tgt_status[8] = {
@@ -138,18 +144,17 @@
{
struct netxen_adapter *adapter = sds_ring->adapter;
- NXWR32(adapter, sds_ring->crb_intr_mask, 0);
+ NXWRIO(adapter, sds_ring->crb_intr_mask, 0);
}
static inline void netxen_nic_enable_int(struct nx_host_sds_ring *sds_ring)
{
struct netxen_adapter *adapter = sds_ring->adapter;
- NXWR32(adapter, sds_ring->crb_intr_mask, 0x1);
+ NXWRIO(adapter, sds_ring->crb_intr_mask, 0x1);
if (!NETXEN_IS_MSI_FAMILY(adapter))
- adapter->pci_write_immediate(adapter,
- adapter->legacy_intr.tgt_mask_reg, 0xfbff);
+ NXWRIO(adapter, adapter->tgt_mask_reg, 0xfbff);
}
static int
@@ -179,7 +184,7 @@
struct netxen_recv_context *recv_ctx = &adapter->recv_ctx;
if (netxen_alloc_sds_rings(recv_ctx, adapter->max_sds_rings))
- return 1;
+ return -ENOMEM;
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &recv_ctx->sds_rings[ring];
@@ -308,36 +313,6 @@
return err;
}
-static void netxen_check_options(struct netxen_adapter *adapter)
-{
- if (adapter->ahw.port_type == NETXEN_NIC_XGBE)
- adapter->num_rxd = MAX_RCV_DESCRIPTORS_10G;
- else if (adapter->ahw.port_type == NETXEN_NIC_GBE)
- adapter->num_rxd = MAX_RCV_DESCRIPTORS_1G;
-
- adapter->msix_supported = 0;
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
- adapter->msix_supported = !!use_msi_x;
- adapter->rss_supported = !!use_msi_x;
- } else if (adapter->fw_version >= NETXEN_VERSION_CODE(3, 4, 336)) {
- switch (adapter->ahw.board_type) {
- case NETXEN_BRDTYPE_P2_SB31_10G:
- case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
- adapter->msix_supported = !!use_msi_x;
- adapter->rss_supported = !!use_msi_x;
- break;
- default:
- break;
- }
- }
-
- adapter->num_txd = MAX_CMD_DESCRIPTORS_HOST;
- adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS;
- adapter->num_lro_rxd = MAX_LRO_RCV_DESCRIPTORS;
-
- return;
-}
-
static int
netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
{
@@ -537,10 +512,22 @@
legacy_intrp = &legacy_intr[adapter->ahw.pci_func];
else
legacy_intrp = &legacy_intr[0];
- adapter->legacy_intr.int_vec_bit = legacy_intrp->int_vec_bit;
- adapter->legacy_intr.tgt_status_reg = legacy_intrp->tgt_status_reg;
- adapter->legacy_intr.tgt_mask_reg = legacy_intrp->tgt_mask_reg;
- adapter->legacy_intr.pci_int_reg = legacy_intrp->pci_int_reg;
+
+ adapter->int_vec_bit = legacy_intrp->int_vec_bit;
+ adapter->tgt_status_reg = netxen_get_ioaddr(adapter,
+ legacy_intrp->tgt_status_reg);
+ adapter->tgt_mask_reg = netxen_get_ioaddr(adapter,
+ legacy_intrp->tgt_mask_reg);
+ adapter->pci_int_reg = netxen_get_ioaddr(adapter,
+ legacy_intrp->pci_int_reg);
+ adapter->isr_int_vec = netxen_get_ioaddr(adapter, ISR_INT_VECTOR);
+
+ if (adapter->ahw.revision_id >= NX_P3_B1)
+ adapter->crb_int_state_reg = netxen_get_ioaddr(adapter,
+ ISR_INT_STATE_REG);
+ else
+ adapter->crb_int_state_reg = netxen_get_ioaddr(adapter,
+ CRB_INT_VECTOR);
netxen_set_msix_bit(pdev, 0);
@@ -567,8 +554,8 @@
if (use_msi && !pci_enable_msi(pdev)) {
adapter->flags |= NETXEN_NIC_MSI_ENABLED;
- adapter->msi_tgt_status =
- msi_tgt_status[adapter->ahw.pci_func];
+ adapter->tgt_status_reg = netxen_get_ioaddr(adapter,
+ msi_tgt_status[adapter->ahw.pci_func]);
dev_info(&pdev->dev, "using msi interrupts\n");
adapter->msix_entries[0].vector = pdev->irq;
return;
@@ -628,14 +615,6 @@
mem_len = pci_resource_len(pdev, 0);
pci_len0 = 0;
- adapter->hw_write_wx = netxen_nic_hw_write_wx_128M;
- adapter->hw_read_wx = netxen_nic_hw_read_wx_128M;
- adapter->pci_read_immediate = netxen_nic_pci_read_immediate_128M;
- adapter->pci_write_immediate = netxen_nic_pci_write_immediate_128M;
- adapter->pci_set_window = netxen_nic_pci_set_window_128M;
- adapter->pci_mem_read = netxen_nic_pci_mem_read_128M;
- adapter->pci_mem_write = netxen_nic_pci_mem_write_128M;
-
/* 128 Meg of memory */
if (mem_len == NETXEN_PCI_128MB_SIZE) {
mem_ptr0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE);
@@ -648,14 +627,6 @@
mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START -
SECOND_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE);
} else if (mem_len == NETXEN_PCI_2MB_SIZE) {
- adapter->hw_write_wx = netxen_nic_hw_write_wx_2M;
- adapter->hw_read_wx = netxen_nic_hw_read_wx_2M;
- adapter->pci_read_immediate = netxen_nic_pci_read_immediate_2M;
- adapter->pci_write_immediate =
- netxen_nic_pci_write_immediate_2M;
- adapter->pci_set_window = netxen_nic_pci_set_window_2M;
- adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
- adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
mem_ptr0 = pci_ioremap_bar(pdev, 0);
if (mem_ptr0 == NULL) {
@@ -667,9 +638,10 @@
adapter->ahw.ddr_mn_window = 0;
adapter->ahw.qdr_sn_window = 0;
- adapter->ahw.mn_win_crb = 0x100000 + PCIX_MN_WINDOW +
- (pci_func * 0x20);
- adapter->ahw.ms_win_crb = 0x100000 + PCIX_SN_WINDOW;
+ adapter->ahw.mn_win_crb = NETXEN_PCI_CRBSPACE +
+ 0x100000 + PCIX_MN_WINDOW + (pci_func * 0x20);
+ adapter->ahw.ms_win_crb = NETXEN_PCI_CRBSPACE +
+ 0x100000 + PCIX_SN_WINDOW;
if (pci_func < 4)
adapter->ahw.ms_win_crb += (pci_func * 0x20);
else
@@ -679,6 +651,8 @@
return -EIO;
}
+ netxen_setup_hwops(adapter);
+
dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
adapter->ahw.pci_base0 = mem_ptr0;
@@ -717,20 +691,111 @@
return err;
}
+static void
+netxen_check_options(struct netxen_adapter *adapter)
+{
+ u32 fw_major, fw_minor, fw_build;
+ char brd_name[NETXEN_MAX_SHORT_NAME];
+ char serial_num[32];
+ int i, offset, val;
+ int *ptr32;
+ struct pci_dev *pdev = adapter->pdev;
+
+ adapter->driver_mismatch = 0;
+
+ ptr32 = (int *)&serial_num;
+ offset = NX_FW_SERIAL_NUM_OFFSET;
+ for (i = 0; i < 8; i++) {
+ if (netxen_rom_fast_read(adapter, offset, &val) == -1) {
+ dev_err(&pdev->dev, "error reading board info\n");
+ adapter->driver_mismatch = 1;
+ return;
+ }
+ ptr32[i] = cpu_to_le32(val);
+ offset += sizeof(u32);
+ }
+
+ fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+ fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+ fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+ adapter->fw_version = NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build);
+
+ if (adapter->portnum == 0) {
+ get_brd_name_by_type(adapter->ahw.board_type, brd_name);
+
+ printk(KERN_INFO "NetXen %s Board S/N %s Chip rev 0x%x\n",
+ brd_name, serial_num, adapter->ahw.revision_id);
+ }
+
+ if (adapter->fw_version < NETXEN_VERSION_CODE(3, 4, 216)) {
+ adapter->driver_mismatch = 1;
+ dev_warn(&pdev->dev, "firmware version %d.%d.%d unsupported\n",
+ fw_major, fw_minor, fw_build);
+ return;
+ }
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ i = NXRD32(adapter, NETXEN_SRE_MISC);
+ adapter->ahw.cut_through = (i & 0x8000) ? 1 : 0;
+ }
+
+ dev_info(&pdev->dev, "firmware v%d.%d.%d [%s]\n",
+ fw_major, fw_minor, fw_build,
+ adapter->ahw.cut_through ? "cut-through" : "legacy");
+
+ if (adapter->fw_version >= NETXEN_VERSION_CODE(4, 0, 222))
+ adapter->capabilities = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
+
+ adapter->flags &= ~NETXEN_NIC_LRO_ENABLED;
+
+ if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
+ adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
+ adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+ } else if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
+ adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
+ adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+ }
+
+ adapter->msix_supported = 0;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ adapter->msix_supported = !!use_msi_x;
+ adapter->rss_supported = !!use_msi_x;
+ } else if (adapter->fw_version >= NETXEN_VERSION_CODE(3, 4, 336)) {
+ switch (adapter->ahw.board_type) {
+ case NETXEN_BRDTYPE_P2_SB31_10G:
+ case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+ adapter->msix_supported = !!use_msi_x;
+ adapter->rss_supported = !!use_msi_x;
+ break;
+ default:
+ break;
+ }
+ }
+
+ adapter->num_txd = MAX_CMD_DESCRIPTORS;
+
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ adapter->num_lro_rxd = MAX_LRO_RCV_DESCRIPTORS;
+ adapter->max_rds_rings = 3;
+ } else {
+ adapter->num_lro_rxd = 0;
+ adapter->max_rds_rings = 2;
+ }
+}
+
static int
-netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
+netxen_start_firmware(struct netxen_adapter *adapter)
{
int val, err, first_boot;
struct pci_dev *pdev = adapter->pdev;
- int first_driver = 0;
+ /* required for NX2031 dummy dma */
+ err = nx_set_dma_mask(adapter);
+ if (err)
+ return err;
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
- first_driver = (adapter->portnum == 0);
- else
- first_driver = (adapter->ahw.pci_func == 0);
-
- if (!first_driver)
+ if (!netxen_can_start_firmware(adapter))
goto wait_init;
first_boot = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
@@ -741,12 +806,13 @@
return err;
}
- if (request_fw)
- netxen_request_firmware(adapter);
+ netxen_request_firmware(adapter);
err = netxen_need_fw_reset(adapter);
- if (err <= 0)
- return err;
+ if (err < 0)
+ goto err_out;
+ if (err == 0)
+ goto ready;
if (first_boot != 0x55555555) {
NXWR32(adapter, CRB_CMDPEG_STATE, 0);
@@ -755,10 +821,17 @@
}
NXWR32(adapter, CRB_DMA_SHIFT, 0x55555555);
+ NXWR32(adapter, NETXEN_PEG_HALT_STATUS1, 0);
+ NXWR32(adapter, NETXEN_PEG_HALT_STATUS2, 0);
+
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
netxen_set_port_mode(adapter);
- netxen_load_firmware(adapter);
+ err = netxen_load_firmware(adapter);
+ if (err)
+ goto err_out;
+
+ netxen_release_firmware(adapter);
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
@@ -770,9 +843,9 @@
}
- err = netxen_initialize_adapter_offload(adapter);
+ err = netxen_init_dummy_dma(adapter);
if (err)
- return err;
+ goto err_out;
/*
* Tell the hardware our version number.
@@ -782,15 +855,28 @@
| (_NETXEN_NIC_LINUX_SUBVERSION);
NXWR32(adapter, CRB_DRIVER_VERSION, val);
+ready:
+ NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_READY);
+
wait_init:
/* Handshake with the card before we register the devices. */
err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
if (err) {
- netxen_free_adapter_offload(adapter);
- return err;
+ netxen_free_dummy_dma(adapter);
+ goto err_out;
}
- return 0;
+ nx_update_dma_mask(adapter);
+
+ netxen_check_options(adapter);
+
+ adapter->need_fw_reset = 0;
+
+ /* fall through and release firmware */
+
+err_out:
+ netxen_release_firmware(adapter);
+ return err;
}
static int
@@ -840,11 +926,28 @@
}
}
+static void
+netxen_nic_init_coalesce_defaults(struct netxen_adapter *adapter)
+{
+ adapter->coal.flags = NETXEN_NIC_INTR_DEFAULT;
+ adapter->coal.normal.data.rx_time_us =
+ NETXEN_DEFAULT_INTR_COALESCE_RX_TIME_US;
+ adapter->coal.normal.data.rx_packets =
+ NETXEN_DEFAULT_INTR_COALESCE_RX_PACKETS;
+ adapter->coal.normal.data.tx_time_us =
+ NETXEN_DEFAULT_INTR_COALESCE_TX_TIME_US;
+ adapter->coal.normal.data.tx_packets =
+ NETXEN_DEFAULT_INTR_COALESCE_TX_PACKETS;
+}
+
static int
netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
{
int err;
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return -EIO;
+
err = adapter->init_port(adapter, adapter->physical_port);
if (err) {
printk(KERN_ERR "%s: Failed to initialize port %d\n",
@@ -862,6 +965,12 @@
if (adapter->max_sds_rings > 1)
netxen_config_rss(adapter, 1);
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ netxen_config_intr_coalesce(adapter);
+
+ if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
+ netxen_config_hw_lro(adapter, NETXEN_NIC_LRO_ENABLED);
+
netxen_napi_enable(adapter);
if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
@@ -869,14 +978,18 @@
else
netxen_nic_set_link_parameters(adapter);
- mod_timer(&adapter->watchdog_timer, jiffies);
-
+ set_bit(__NX_DEV_UP, &adapter->state);
return 0;
}
static void
netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
{
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return;
+
+ clear_bit(__NX_DEV_UP, &adapter->state);
+
spin_lock(&adapter->tx_clean_lock);
netif_carrier_off(netdev);
netif_tx_disable(netdev);
@@ -887,12 +1000,12 @@
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
netxen_p3_free_mac_list(adapter);
+ adapter->set_promisc(adapter, NETXEN_NIU_NON_PROMISC_MODE);
+
netxen_napi_disable(adapter);
netxen_release_tx_buffers(adapter);
spin_unlock(&adapter->tx_clean_lock);
-
- del_timer_sync(&adapter->watchdog_timer);
}
@@ -905,6 +1018,9 @@
struct nx_host_rds_ring *rds_ring;
struct nx_host_tx_ring *tx_ring;
+ if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
+ return 0;
+
err = netxen_init_firmware(adapter);
if (err)
return err;
@@ -913,11 +1029,6 @@
if (err)
return err;
- if (adapter->fw_major < 4)
- adapter->max_rds_rings = 3;
- else
- adapter->max_rds_rings = 2;
-
err = netxen_alloc_sw_resources(adapter);
if (err) {
printk(KERN_ERR "%s: Error in setting sw resources\n",
@@ -925,8 +1036,6 @@
return err;
}
- netxen_nic_clear_stats(adapter);
-
err = netxen_alloc_hw_resources(adapter);
if (err) {
printk(KERN_ERR "%s: Error in setting hw resources\n",
@@ -934,10 +1043,12 @@
goto err_out_free_sw;
}
- if (adapter->fw_major < 4) {
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
tx_ring = adapter->tx_ring;
- tx_ring->crb_cmd_producer = crb_cmd_producer[adapter->portnum];
- tx_ring->crb_cmd_consumer = crb_cmd_consumer[adapter->portnum];
+ tx_ring->crb_cmd_producer = netxen_get_ioaddr(adapter,
+ crb_cmd_producer[adapter->portnum]);
+ tx_ring->crb_cmd_consumer = netxen_get_ioaddr(adapter,
+ crb_cmd_consumer[adapter->portnum]);
tx_ring->producer = 0;
tx_ring->sw_consumer = 0;
@@ -958,6 +1069,11 @@
goto err_out_free_rxbuf;
}
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ netxen_nic_init_coalesce_defaults(adapter);
+
+ netxen_create_sysfs_entries(adapter);
+
adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
return 0;
@@ -972,6 +1088,11 @@
static void
netxen_nic_detach(struct netxen_adapter *adapter)
{
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return;
+
+ netxen_remove_sysfs_entries(adapter);
+
netxen_free_hw_resources(adapter);
netxen_release_rx_buffers(adapter);
netxen_nic_free_irq(adapter);
@@ -981,6 +1102,101 @@
adapter->is_up = 0;
}
+int
+netxen_nic_reset_context(struct netxen_adapter *adapter)
+{
+ int err = 0;
+ struct net_device *netdev = adapter->netdev;
+
+ if (test_and_set_bit(__NX_RESETTING, &adapter->state))
+ return -EBUSY;
+
+ if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ netxen_nic_down(adapter, netdev);
+
+ netxen_nic_detach(adapter);
+
+ if (netif_running(netdev)) {
+ err = netxen_nic_attach(adapter);
+ if (!err)
+ err = netxen_nic_up(adapter, netdev);
+
+ if (err)
+ goto done;
+ }
+
+ netif_device_attach(netdev);
+ }
+
+done:
+ clear_bit(__NX_RESETTING, &adapter->state);
+ return err;
+}
+
+static int
+netxen_setup_netdev(struct netxen_adapter *adapter,
+ struct net_device *netdev)
+{
+ int err = 0;
+ struct pci_dev *pdev = adapter->pdev;
+
+ adapter->rx_csum = 1;
+ adapter->mc_enabled = 0;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ adapter->max_mc_count = 38;
+ else
+ adapter->max_mc_count = 16;
+
+ netdev->netdev_ops = &netxen_netdev_ops;
+ netdev->watchdog_timeo = 2*HZ;
+
+ netxen_nic_change_mtu(netdev, netdev->mtu);
+
+ SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
+
+ netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+ netdev->features |= (NETIF_F_GRO);
+ netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+ netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+ }
+
+ if (adapter->pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
+ netdev->features |= (NETIF_F_HW_VLAN_TX);
+
+ if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
+ netdev->features |= NETIF_F_LRO;
+
+ netdev->irq = adapter->msix_entries[0].vector;
+
+ INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
+
+ if (netxen_read_mac_addr(adapter))
+ dev_warn(&pdev->dev, "failed to read mac addr\n");
+
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ err = register_netdev(netdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register net device\n");
+ return err;
+ }
+
+ return 0;
+}
+
static int __devinit
netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -1018,9 +1234,8 @@
netdev = alloc_etherdev(sizeof(struct netxen_adapter));
if(!netdev) {
- printk(KERN_ERR"%s: Failed to allocate memory for the "
- "device block.Check system memory resource"
- " usage.\n", netxen_nic_driver_name);
+ dev_err(&pdev->dev, "failed to allocate net_device\n");
+ err = -ENOMEM;
goto err_out_free_res;
}
@@ -1034,10 +1249,6 @@
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
- err = nx_set_dma_mask(adapter);
- if (err)
- goto err_out_free_netdev;
-
rwlock_init(&adapter->adapter_lock);
spin_lock_init(&adapter->tx_clean_lock);
INIT_LIST_HEAD(&adapter->mac_list);
@@ -1048,43 +1259,13 @@
/* This will be reset for mezz cards */
adapter->portnum = pci_func_id;
- adapter->rx_csum = 1;
- adapter->mc_enabled = 0;
- if (NX_IS_REVISION_P3(revision_id))
- adapter->max_mc_count = 38;
- else
- adapter->max_mc_count = 16;
- netdev->netdev_ops = &netxen_netdev_ops;
- netdev->watchdog_timeo = 2*HZ;
-
- netxen_nic_change_mtu(netdev, netdev->mtu);
-
- SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
-
- netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
- netdev->features |= (NETIF_F_GRO);
- netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
-
- if (NX_IS_REVISION_P3(revision_id)) {
- netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
- netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
- }
-
- if (adapter->pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
-
- if (netxen_nic_get_board_info(adapter) != 0) {
- printk("%s: Error getting board config info.\n",
- netxen_nic_driver_name);
- err = -EIO;
+ err = netxen_nic_get_board_info(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Error getting board config info.\n");
goto err_out_iounmap;
}
- netxen_initialize_adapter_ops(adapter);
-
/* Mezz cards have PCI function 0,2,3 enabled */
switch (adapter->ahw.board_type) {
case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
@@ -1096,53 +1277,32 @@
break;
}
- err = netxen_start_firmware(adapter, 1);
+ err = netxen_start_firmware(adapter);
if (err)
goto err_out_iounmap;
- nx_update_dma_mask(adapter);
-
- netxen_nic_get_firmware_info(adapter);
-
/*
* See if the firmware gave us a virtual-physical port mapping.
*/
adapter->physical_port = adapter->portnum;
- if (adapter->fw_major < 4) {
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
i = NXRD32(adapter, CRB_V2P(adapter->portnum));
if (i != 0x55555555)
adapter->physical_port = i;
}
- netxen_check_options(adapter);
+ netxen_nic_clear_stats(adapter);
netxen_setup_intr(adapter);
- netdev->irq = adapter->msix_entries[0].vector;
-
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = &netxen_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
- INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
- INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
-
- err = netxen_read_mac_addr(adapter);
+ err = netxen_setup_netdev(adapter, netdev);
if (err)
- dev_warn(&pdev->dev, "failed to read mac addr\n");
-
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
-
- if ((err = register_netdev(netdev))) {
- printk(KERN_ERR "%s: register_netdev failed port #%d"
- " aborting\n", netxen_nic_driver_name,
- adapter->portnum);
- err = -EIO;
goto err_out_disable_msi;
- }
pci_set_drvdata(pdev, adapter);
+ netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+
switch (adapter->ahw.port_type) {
case NETXEN_NIC_GBE:
dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
@@ -1159,7 +1319,9 @@
err_out_disable_msi:
netxen_teardown_intr(adapter);
- netxen_free_adapter_offload(adapter);
+ netxen_free_dummy_dma(adapter);
+
+ nx_decr_dev_ref_cnt(adapter);
err_out_iounmap:
netxen_cleanup_pci_map(adapter);
@@ -1187,17 +1349,20 @@
netdev = adapter->netdev;
+ netxen_cancel_fw_work(adapter);
+
unregister_netdev(netdev);
- cancel_work_sync(&adapter->watchdog_task);
cancel_work_sync(&adapter->tx_timeout_task);
- if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
- netxen_nic_detach(adapter);
- }
+ netxen_nic_detach(adapter);
+
+ nx_decr_dev_ref_cnt(adapter);
if (adapter->portnum == 0)
- netxen_free_adapter_offload(adapter);
+ netxen_free_dummy_dma(adapter);
+
+ clear_bit(__NX_RESETTING, &adapter->state);
netxen_teardown_intr(adapter);
@@ -1211,27 +1376,33 @@
free_netdev(netdev);
}
-
-#ifdef CONFIG_PM
-static int
-netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __netxen_nic_shutdown(struct pci_dev *pdev)
{
-
struct netxen_adapter *adapter = pci_get_drvdata(pdev);
struct net_device *netdev = adapter->netdev;
+ int retval;
netif_device_detach(netdev);
+ netxen_cancel_fw_work(adapter);
+
if (netif_running(netdev))
netxen_nic_down(adapter, netdev);
- cancel_work_sync(&adapter->watchdog_task);
cancel_work_sync(&adapter->tx_timeout_task);
- if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
- netxen_nic_detach(adapter);
+ netxen_nic_detach(adapter);
- pci_save_state(pdev);
+ if (adapter->portnum == 0)
+ netxen_free_dummy_dma(adapter);
+
+ nx_decr_dev_ref_cnt(adapter);
+
+ clear_bit(__NX_RESETTING, &adapter->state);
+
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
if (netxen_nic_wol_supported(adapter)) {
pci_enable_wake(pdev, PCI_D3cold, 1);
@@ -1239,10 +1410,27 @@
}
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
+static void netxen_nic_shutdown(struct pci_dev *pdev)
+{
+ if (__netxen_nic_shutdown(pdev))
+ return;
+}
+#ifdef CONFIG_PM
+static int
+netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+
+ retval = __netxen_nic_shutdown(pdev);
+ if (retval)
+ return retval;
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
static int
netxen_nic_resume(struct pci_dev *pdev)
@@ -1260,7 +1448,7 @@
adapter->curr_window = 255;
- err = netxen_start_firmware(adapter, 0);
+ err = netxen_start_firmware(adapter);
if (err) {
dev_err(&pdev->dev, "failed to start firmware\n");
return err;
@@ -1269,16 +1457,24 @@
if (netif_running(netdev)) {
err = netxen_nic_attach(adapter);
if (err)
- return err;
+ goto err_out;
err = netxen_nic_up(adapter, netdev);
if (err)
- return err;
+ goto err_out_detach;
netif_device_attach(netdev);
+
+ netxen_config_indev_addr(netdev, NETDEV_UP);
}
- return 0;
+ netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+
+err_out_detach:
+ netxen_nic_detach(adapter);
+err_out:
+ nx_decr_dev_ref_cnt(adapter);
+ return err;
}
#endif
@@ -1290,11 +1486,9 @@
if (adapter->driver_mismatch)
return -EIO;
- if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
- err = netxen_nic_attach(adapter);
- if (err)
- return err;
- }
+ err = netxen_nic_attach(adapter);
+ if (err)
+ return err;
err = netxen_nic_up(adapter, netdev);
if (err)
@@ -1320,30 +1514,52 @@
return 0;
}
-static bool netxen_tso_check(struct net_device *netdev,
- struct cmd_desc_type0 *desc, struct sk_buff *skb)
+static void
+netxen_tso_check(struct net_device *netdev,
+ struct nx_host_tx_ring *tx_ring,
+ struct cmd_desc_type0 *first_desc,
+ struct sk_buff *skb)
{
- bool tso = false;
u8 opcode = TX_ETHER_PKT;
__be16 protocol = skb->protocol;
- u16 flags = 0;
+ u16 flags = 0, vid = 0;
+ u32 producer;
+ int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
+ struct cmd_desc_type0 *hwdesc;
+ struct vlan_ethhdr *vh;
if (protocol == cpu_to_be16(ETH_P_8021Q)) {
- struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
+
+ vh = (struct vlan_ethhdr *)skb->data;
protocol = vh->h_vlan_encapsulated_proto;
flags = FLAGS_VLAN_TAGGED;
+
+ } else if (vlan_tx_tag_present(skb)) {
+
+ flags = FLAGS_VLAN_OOB;
+ vid = vlan_tx_tag_get(skb);
+ netxen_set_tx_vlan_tci(first_desc, vid);
+ vlan_oob = 1;
}
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
skb_shinfo(skb)->gso_size > 0) {
- desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
- desc->total_hdr_length =
- skb_transport_offset(skb) + tcp_hdrlen(skb);
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+
+ first_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+ first_desc->total_hdr_length = hdr_len;
+ if (vlan_oob) {
+ first_desc->total_hdr_length += VLAN_HLEN;
+ first_desc->tcp_hdr_offset = VLAN_HLEN;
+ first_desc->ip_hdr_offset = VLAN_HLEN;
+ /* Only in case of TSO on vlan device */
+ flags |= FLAGS_VLAN_TAGGED;
+ }
opcode = (protocol == cpu_to_be16(ETH_P_IPV6)) ?
TX_TCP_LSO6 : TX_TCP_LSO;
- tso = true;
+ tso = 1;
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
u8 l4proto;
@@ -1364,55 +1580,133 @@
opcode = TX_UDPV6_PKT;
}
}
- desc->tcp_hdr_offset = skb_transport_offset(skb);
- desc->ip_hdr_offset = skb_network_offset(skb);
- netxen_set_tx_flags_opcode(desc, flags, opcode);
- return tso;
+
+ first_desc->tcp_hdr_offset += skb_transport_offset(skb);
+ first_desc->ip_hdr_offset += skb_network_offset(skb);
+ netxen_set_tx_flags_opcode(first_desc, flags, opcode);
+
+ if (!tso)
+ return;
+
+ /* For LSO, we need to copy the MAC/IP/TCP headers into
+ * the descriptor ring
+ */
+ producer = tx_ring->producer;
+ copied = 0;
+ offset = 2;
+
+ if (vlan_oob) {
+ /* Create a TSO vlan header template for firmware */
+
+ hwdesc = &tx_ring->desc_head[producer];
+ tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+ copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
+ hdr_len + VLAN_HLEN);
+
+ vh = (struct vlan_ethhdr *)((char *)hwdesc + 2);
+ skb_copy_from_linear_data(skb, vh, 12);
+ vh->h_vlan_proto = htons(ETH_P_8021Q);
+ vh->h_vlan_TCI = htons(vid);
+ skb_copy_from_linear_data_offset(skb, 12,
+ (char *)vh + 16, copy_len - 16);
+
+ copied = copy_len - VLAN_HLEN;
+ offset = 0;
+
+ producer = get_next_index(producer, tx_ring->num_desc);
+ }
+
+ while (copied < hdr_len) {
+
+ copy_len = min((int)sizeof(struct cmd_desc_type0) - offset,
+ (hdr_len - copied));
+
+ hwdesc = &tx_ring->desc_head[producer];
+ tx_ring->cmd_buf_arr[producer].skb = NULL;
+
+ skb_copy_from_linear_data_offset(skb, copied,
+ (char *)hwdesc + offset, copy_len);
+
+ copied += copy_len;
+ offset = 0;
+
+ producer = get_next_index(producer, tx_ring->num_desc);
+ }
+
+ tx_ring->producer = producer;
+ barrier();
}
-static void
-netxen_clean_tx_dma_mapping(struct pci_dev *pdev,
- struct netxen_cmd_buffer *pbuf, int last)
+static int
+netxen_map_tx_skb(struct pci_dev *pdev,
+ struct sk_buff *skb, struct netxen_cmd_buffer *pbuf)
{
- int k;
- struct netxen_skb_frag *buffrag;
+ struct netxen_skb_frag *nf;
+ struct skb_frag_struct *frag;
+ int i, nr_frags;
+ dma_addr_t map;
- buffrag = &pbuf->frag_array[0];
- pci_unmap_single(pdev, buffrag->dma,
- buffrag->length, PCI_DMA_TODEVICE);
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ nf = &pbuf->frag_array[0];
- for (k = 1; k < last; k++) {
- buffrag = &pbuf->frag_array[k];
- pci_unmap_page(pdev, buffrag->dma,
- buffrag->length, PCI_DMA_TODEVICE);
+ map = pci_map_single(pdev, skb->data,
+ skb_headlen(skb), PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, map))
+ goto out_err;
+
+ nf->dma = map;
+ nf->length = skb_headlen(skb);
+
+ for (i = 0; i < nr_frags; i++) {
+ frag = &skb_shinfo(skb)->frags[i];
+ nf = &pbuf->frag_array[i+1];
+
+ map = pci_map_page(pdev, frag->page, frag->page_offset,
+ frag->size, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, map))
+ goto unwind;
+
+ nf->dma = map;
+ nf->length = frag->size;
}
+
+ return 0;
+
+unwind:
+ while (--i >= 0) {
+ nf = &pbuf->frag_array[i+1];
+ pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE);
+ }
+
+ nf = &pbuf->frag_array[0];
+ pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
+
+out_err:
+ return -ENOMEM;
}
static inline void
netxen_clear_cmddesc(u64 *desc)
{
- int i;
- for (i = 0; i < 8; i++)
- desc[i] = 0ULL;
+ desc[0] = 0ULL;
+ desc[2] = 0ULL;
}
-static int
+static netdev_tx_t
netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
- unsigned int first_seg_len = skb->len - skb->data_len;
struct netxen_cmd_buffer *pbuf;
struct netxen_skb_frag *buffrag;
- struct cmd_desc_type0 *hwdesc;
- struct pci_dev *pdev = adapter->pdev;
- dma_addr_t temp_dma;
+ struct cmd_desc_type0 *hwdesc, *first_desc;
+ struct pci_dev *pdev;
int i, k;
u32 producer;
int frag_count, no_of_desc;
u32 num_txd = tx_ring->num_desc;
- bool is_tso = false;
frag_count = skb_shinfo(skb)->nr_frags + 1;
@@ -1425,121 +1719,60 @@
}
producer = tx_ring->producer;
-
- hwdesc = &tx_ring->desc_head[producer];
- netxen_clear_cmddesc((u64 *)hwdesc);
pbuf = &tx_ring->cmd_buf_arr[producer];
- is_tso = netxen_tso_check(netdev, hwdesc, skb);
+ pdev = adapter->pdev;
+
+ if (netxen_map_tx_skb(pdev, skb, pbuf))
+ goto drop_packet;
pbuf->skb = skb;
pbuf->frag_count = frag_count;
- buffrag = &pbuf->frag_array[0];
- temp_dma = pci_map_single(pdev, skb->data, first_seg_len,
- PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(pdev, temp_dma))
- goto drop_packet;
- buffrag->dma = temp_dma;
- buffrag->length = first_seg_len;
- netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
- netxen_set_tx_port(hwdesc, adapter->portnum);
+ first_desc = hwdesc = &tx_ring->desc_head[producer];
+ netxen_clear_cmddesc((u64 *)hwdesc);
- hwdesc->buffer_length[0] = cpu_to_le16(first_seg_len);
- hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
+ netxen_set_tx_frags_len(first_desc, frag_count, skb->len);
+ netxen_set_tx_port(first_desc, adapter->portnum);
- for (i = 1, k = 1; i < frag_count; i++, k++) {
- struct skb_frag_struct *frag;
- int len, temp_len;
- unsigned long offset;
+ for (i = 0; i < frag_count; i++) {
- /* move to next desc. if there is a need */
- if ((i & 0x3) == 0) {
- k = 0;
+ k = i % 4;
+
+ if ((k == 0) && (i > 0)) {
+ /* move to next desc.*/
producer = get_next_index(producer, num_txd);
hwdesc = &tx_ring->desc_head[producer];
netxen_clear_cmddesc((u64 *)hwdesc);
- pbuf = &tx_ring->cmd_buf_arr[producer];
- pbuf->skb = NULL;
- }
- frag = &skb_shinfo(skb)->frags[i - 1];
- len = frag->size;
- offset = frag->page_offset;
-
- temp_len = len;
- temp_dma = pci_map_page(pdev, frag->page, offset,
- len, PCI_DMA_TODEVICE);
- if (pci_dma_mapping_error(pdev, temp_dma)) {
- netxen_clean_tx_dma_mapping(pdev, pbuf, i);
- goto drop_packet;
+ tx_ring->cmd_buf_arr[producer].skb = NULL;
}
- buffrag++;
- buffrag->dma = temp_dma;
- buffrag->length = temp_len;
+ buffrag = &pbuf->frag_array[i];
- hwdesc->buffer_length[k] = cpu_to_le16(temp_len);
+ hwdesc->buffer_length[k] = cpu_to_le16(buffrag->length);
switch (k) {
case 0:
- hwdesc->addr_buffer1 = cpu_to_le64(temp_dma);
+ hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
break;
case 1:
- hwdesc->addr_buffer2 = cpu_to_le64(temp_dma);
+ hwdesc->addr_buffer2 = cpu_to_le64(buffrag->dma);
break;
case 2:
- hwdesc->addr_buffer3 = cpu_to_le64(temp_dma);
+ hwdesc->addr_buffer3 = cpu_to_le64(buffrag->dma);
break;
case 3:
- hwdesc->addr_buffer4 = cpu_to_le64(temp_dma);
+ hwdesc->addr_buffer4 = cpu_to_le64(buffrag->dma);
break;
}
- frag++;
- }
- producer = get_next_index(producer, num_txd);
-
- /* For LSO, we need to copy the MAC/IP/TCP headers into
- * the descriptor ring
- */
- if (is_tso) {
- int hdr_len, first_hdr_len, more_hdr;
- hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
- first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
- more_hdr = 1;
- } else {
- first_hdr_len = hdr_len;
- more_hdr = 0;
- }
- /* copy the MAC/IP/TCP headers to the cmd descriptor list */
- hwdesc = &tx_ring->desc_head[producer];
- pbuf = &tx_ring->cmd_buf_arr[producer];
- pbuf->skb = NULL;
-
- /* copy the first 64 bytes */
- memcpy(((void *)hwdesc) + 2,
- (void *)(skb->data), first_hdr_len);
- producer = get_next_index(producer, num_txd);
-
- if (more_hdr) {
- hwdesc = &tx_ring->desc_head[producer];
- pbuf = &tx_ring->cmd_buf_arr[producer];
- pbuf->skb = NULL;
- /* copy the next 64 bytes - should be enough except
- * for pathological case
- */
- skb_copy_from_linear_data_offset(skb, first_hdr_len,
- hwdesc,
- (hdr_len -
- first_hdr_len));
- producer = get_next_index(producer, num_txd);
- }
}
- tx_ring->producer = producer;
- adapter->stats.txbytes += skb->len;
+ tx_ring->producer = get_next_index(producer, num_txd);
+
+ netxen_tso_check(netdev, tx_ring, first_desc, skb);
netxen_nic_update_cmd_producer(adapter, tx_ring);
+ adapter->stats.txbytes += skb->len;
adapter->stats.xmitcalled++;
return NETDEV_TX_OK;
@@ -1635,58 +1868,14 @@
netxen_advert_link_change(adapter, linkup);
}
-static void netxen_nic_thermal_shutdown(struct netxen_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
-
- netif_device_detach(netdev);
- netxen_nic_down(adapter, netdev);
- netxen_nic_detach(adapter);
-}
-
-static void netxen_watchdog(unsigned long v)
-{
- struct netxen_adapter *adapter = (struct netxen_adapter *)v;
-
- if (netxen_nic_check_temp(adapter))
- goto do_sched;
-
- if (!adapter->has_link_events) {
- netxen_nic_handle_phy_intr(adapter);
-
- if (adapter->link_changed)
- goto do_sched;
- }
-
- if (netif_running(adapter->netdev))
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
-
- return;
-
-do_sched:
- schedule_work(&adapter->watchdog_task);
-}
-
-void netxen_watchdog_task(struct work_struct *work)
-{
- struct netxen_adapter *adapter =
- container_of(work, struct netxen_adapter, watchdog_task);
-
- if (adapter->temp == NX_TEMP_PANIC) {
- netxen_nic_thermal_shutdown(adapter);
- return;
- }
-
- if (adapter->link_changed)
- netxen_nic_set_link_parameters(adapter);
-
- if (netif_running(adapter->netdev))
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
-}
-
static void netxen_tx_timeout(struct net_device *netdev)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
+
+ if (test_bit(__NX_RESETTING, &adapter->state))
+ return;
+
+ dev_err(&netdev->dev, "transmit timeout, resetting.\n");
schedule_work(&adapter->tx_timeout_task);
}
@@ -1698,15 +1887,37 @@
if (!netif_running(adapter->netdev))
return;
- printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
- netxen_nic_driver_name, adapter->netdev->name);
+ if (test_and_set_bit(__NX_RESETTING, &adapter->state))
+ return;
- netxen_napi_disable(adapter);
+ if (++adapter->tx_timeo_cnt >= NX_MAX_TX_TIMEOUTS)
+ goto request_reset;
- adapter->netdev->trans_start = jiffies;
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ /* try to scrub interrupt */
+ netxen_napi_disable(adapter);
- netxen_napi_enable(adapter);
- netif_wake_queue(adapter->netdev);
+ adapter->netdev->trans_start = jiffies;
+
+ netxen_napi_enable(adapter);
+
+ netif_wake_queue(adapter->netdev);
+
+ goto done;
+
+ } else {
+ if (!netxen_nic_reset_context(adapter)) {
+ adapter->netdev->trans_start = jiffies;
+ goto done;
+ }
+
+ /* context reset failed, fall through for fw reset */
+ }
+
+request_reset:
+ adapter->need_fw_reset = 1;
+done:
+ clear_bit(__NX_RESETTING, &adapter->state);
}
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
@@ -1716,7 +1927,7 @@
memset(stats, 0, sizeof(*stats));
- stats->rx_packets = adapter->stats.no_rcv;
+ stats->rx_packets = adapter->stats.rx_pkts + adapter->stats.lro_pkts;
stats->tx_packets = adapter->stats.xmitfinished;
stats->rx_bytes = adapter->stats.rxbytes;
stats->tx_bytes = adapter->stats.txbytes;
@@ -1732,41 +1943,37 @@
struct netxen_adapter *adapter = sds_ring->adapter;
u32 status = 0;
- status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+ status = readl(adapter->isr_int_vec);
- if (!(status & adapter->legacy_intr.int_vec_bit))
+ if (!(status & adapter->int_vec_bit))
return IRQ_NONE;
- if (adapter->ahw.revision_id >= NX_P3_B1) {
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
/* check interrupt state machine, to be sure */
- status = adapter->pci_read_immediate(adapter,
- ISR_INT_STATE_REG);
+ status = readl(adapter->crb_int_state_reg);
if (!ISR_LEGACY_INT_TRIGGERED(status))
return IRQ_NONE;
} else {
unsigned long our_int = 0;
- our_int = NXRD32(adapter, CRB_INT_VECTOR);
+ our_int = readl(adapter->crb_int_state_reg);
/* not our interrupt */
if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
return IRQ_NONE;
/* claim interrupt */
- NXWR32(adapter, CRB_INT_VECTOR, (our_int & 0xffffffff));
+ writel((our_int & 0xffffffff), adapter->crb_int_state_reg);
+
+ /* clear interrupt */
+ netxen_nic_disable_int(sds_ring);
}
- /* clear interrupt */
- if (adapter->fw_major < 4)
- netxen_nic_disable_int(sds_ring);
-
- adapter->pci_write_immediate(adapter,
- adapter->legacy_intr.tgt_status_reg,
- 0xffffffff);
+ writel(0xffffffff, adapter->tgt_status_reg);
/* read twice to ensure write is flushed */
- adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
- adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+ readl(adapter->isr_int_vec);
+ readl(adapter->isr_int_vec);
napi_schedule(&sds_ring->napi);
@@ -1779,8 +1986,7 @@
struct netxen_adapter *adapter = sds_ring->adapter;
/* clear interrupt */
- adapter->pci_write_immediate(adapter,
- adapter->msi_tgt_status, 0xffffffff);
+ writel(0xffffffff, adapter->tgt_status_reg);
napi_schedule(&sds_ring->napi);
return IRQ_HANDLED;
@@ -1827,6 +2033,473 @@
}
#endif
+static int
+nx_incr_dev_ref_cnt(struct netxen_adapter *adapter)
+{
+ int count;
+ if (netxen_api_lock(adapter))
+ return -EIO;
+
+ count = NXRD32(adapter, NX_CRB_DEV_REF_COUNT);
+
+ NXWR32(adapter, NX_CRB_DEV_REF_COUNT, ++count);
+
+ netxen_api_unlock(adapter);
+ return count;
+}
+
+static int
+nx_decr_dev_ref_cnt(struct netxen_adapter *adapter)
+{
+ int count;
+ if (netxen_api_lock(adapter))
+ return -EIO;
+
+ count = NXRD32(adapter, NX_CRB_DEV_REF_COUNT);
+ WARN_ON(count == 0);
+
+ NXWR32(adapter, NX_CRB_DEV_REF_COUNT, --count);
+
+ if (count == 0)
+ NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_COLD);
+
+ netxen_api_unlock(adapter);
+ return count;
+}
+
+static void
+nx_dev_request_reset(struct netxen_adapter *adapter)
+{
+ u32 state;
+
+ if (netxen_api_lock(adapter))
+ return;
+
+ state = NXRD32(adapter, NX_CRB_DEV_STATE);
+
+ if (state != NX_DEV_INITALIZING)
+ NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_NEED_RESET);
+
+ netxen_api_unlock(adapter);
+}
+
+static int
+netxen_can_start_firmware(struct netxen_adapter *adapter)
+{
+ int count;
+ int can_start = 0;
+
+ if (netxen_api_lock(adapter))
+ return 0;
+
+ count = NXRD32(adapter, NX_CRB_DEV_REF_COUNT);
+
+ if ((count < 0) || (count >= NX_MAX_PCI_FUNC))
+ count = 0;
+
+ if (count == 0) {
+ can_start = 1;
+ NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_INITALIZING);
+ }
+
+ NXWR32(adapter, NX_CRB_DEV_REF_COUNT, ++count);
+
+ netxen_api_unlock(adapter);
+
+ return can_start;
+}
+
+static void
+netxen_schedule_work(struct netxen_adapter *adapter,
+ work_func_t func, int delay)
+{
+ INIT_DELAYED_WORK(&adapter->fw_work, func);
+ schedule_delayed_work(&adapter->fw_work, delay);
+}
+
+static void
+netxen_cancel_fw_work(struct netxen_adapter *adapter)
+{
+ while (test_and_set_bit(__NX_RESETTING, &adapter->state))
+ msleep(10);
+
+ cancel_delayed_work_sync(&adapter->fw_work);
+}
+
+static void
+netxen_attach_work(struct work_struct *work)
+{
+ struct netxen_adapter *adapter = container_of(work,
+ struct netxen_adapter, fw_work.work);
+ struct net_device *netdev = adapter->netdev;
+ int err = 0;
+
+ if (netif_running(netdev)) {
+ err = netxen_nic_attach(adapter);
+ if (err)
+ goto done;
+
+ err = netxen_nic_up(adapter, netdev);
+ if (err) {
+ netxen_nic_detach(adapter);
+ goto done;
+ }
+
+ netxen_config_indev_addr(netdev, NETDEV_UP);
+ }
+
+ netif_device_attach(netdev);
+
+done:
+ adapter->fw_fail_cnt = 0;
+ clear_bit(__NX_RESETTING, &adapter->state);
+ netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+}
+
+static void
+netxen_fwinit_work(struct work_struct *work)
+{
+ struct netxen_adapter *adapter = container_of(work,
+ struct netxen_adapter, fw_work.work);
+ int dev_state;
+
+ dev_state = NXRD32(adapter, NX_CRB_DEV_STATE);
+
+ switch (dev_state) {
+ case NX_DEV_COLD:
+ case NX_DEV_READY:
+ if (!netxen_start_firmware(adapter)) {
+ netxen_schedule_work(adapter, netxen_attach_work, 0);
+ return;
+ }
+ break;
+
+ case NX_DEV_INITALIZING:
+ if (++adapter->fw_wait_cnt < FW_POLL_THRESH) {
+ netxen_schedule_work(adapter,
+ netxen_fwinit_work, 2 * FW_POLL_DELAY);
+ return;
+ }
+ break;
+
+ case NX_DEV_FAILED:
+ default:
+ break;
+ }
+
+ nx_incr_dev_ref_cnt(adapter);
+ clear_bit(__NX_RESETTING, &adapter->state);
+}
+
+static void
+netxen_detach_work(struct work_struct *work)
+{
+ struct netxen_adapter *adapter = container_of(work,
+ struct netxen_adapter, fw_work.work);
+ struct net_device *netdev = adapter->netdev;
+ int ref_cnt, delay;
+ u32 status;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ netxen_nic_down(adapter, netdev);
+
+ netxen_nic_detach(adapter);
+
+ status = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
+
+ ref_cnt = nx_decr_dev_ref_cnt(adapter);
+
+ if (status & NX_RCODE_FATAL_ERROR)
+ return;
+
+ if (adapter->temp == NX_TEMP_PANIC)
+ return;
+
+ delay = (ref_cnt == 0) ? 0 : (2 * FW_POLL_DELAY);
+
+ adapter->fw_wait_cnt = 0;
+ netxen_schedule_work(adapter, netxen_fwinit_work, delay);
+}
+
+static int
+netxen_check_health(struct netxen_adapter *adapter)
+{
+ u32 state, heartbit;
+ struct net_device *netdev = adapter->netdev;
+
+ if (netxen_nic_check_temp(adapter))
+ goto detach;
+
+ if (adapter->need_fw_reset) {
+ nx_dev_request_reset(adapter);
+ goto detach;
+ }
+
+ state = NXRD32(adapter, NX_CRB_DEV_STATE);
+ if (state == NX_DEV_NEED_RESET)
+ goto detach;
+
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 0;
+
+ heartbit = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ if (heartbit != adapter->heartbit) {
+ adapter->heartbit = heartbit;
+ adapter->fw_fail_cnt = 0;
+ return 0;
+ }
+
+ if (++adapter->fw_fail_cnt < FW_FAIL_THRESH)
+ return 0;
+
+ clear_bit(__NX_FW_ATTACHED, &adapter->state);
+
+ dev_info(&netdev->dev, "firmware hang detected\n");
+
+detach:
+ if (!test_and_set_bit(__NX_RESETTING, &adapter->state))
+ netxen_schedule_work(adapter, netxen_detach_work, 0);
+ return 1;
+}
+
+static void
+netxen_fw_poll_work(struct work_struct *work)
+{
+ struct netxen_adapter *adapter = container_of(work,
+ struct netxen_adapter, fw_work.work);
+
+ if (test_bit(__NX_RESETTING, &adapter->state))
+ goto reschedule;
+
+ if (test_bit(__NX_DEV_UP, &adapter->state)) {
+ if (!adapter->has_link_events) {
+
+ netxen_nic_handle_phy_intr(adapter);
+
+ if (adapter->link_changed)
+ netxen_nic_set_link_parameters(adapter);
+ }
+ }
+
+ if (netxen_check_health(adapter))
+ return;
+
+reschedule:
+ netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+}
+
+static ssize_t
+netxen_store_bridged_mode(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ struct net_device *net = to_net_dev(dev);
+ struct netxen_adapter *adapter = netdev_priv(net);
+ unsigned long new;
+ int ret = -EINVAL;
+
+ if (!(adapter->capabilities & NX_FW_CAPABILITY_BDG))
+ goto err_out;
+
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ goto err_out;
+
+ if (strict_strtoul(buf, 2, &new))
+ goto err_out;
+
+ if (!netxen_config_bridged_mode(adapter, !!new))
+ ret = len;
+
+err_out:
+ return ret;
+}
+
+static ssize_t
+netxen_show_bridged_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct net_device *net = to_net_dev(dev);
+ struct netxen_adapter *adapter;
+ int bridged_mode = 0;
+
+ adapter = netdev_priv(net);
+
+ if (adapter->capabilities & NX_FW_CAPABILITY_BDG)
+ bridged_mode = !!(adapter->flags & NETXEN_NIC_BRIDGE_ENABLED);
+
+ return sprintf(buf, "%d\n", bridged_mode);
+}
+
+static struct device_attribute dev_attr_bridged_mode = {
+ .attr = {.name = "bridged_mode", .mode = (S_IRUGO | S_IWUSR)},
+ .show = netxen_show_bridged_mode,
+ .store = netxen_store_bridged_mode,
+};
+
+static void
+netxen_create_sysfs_entries(struct netxen_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct device *dev = &netdev->dev;
+
+ if (adapter->capabilities & NX_FW_CAPABILITY_BDG) {
+ /* bridged_mode control */
+ if (device_create_file(dev, &dev_attr_bridged_mode)) {
+ dev_warn(&netdev->dev,
+ "failed to create bridged_mode sysfs entry\n");
+ }
+ }
+}
+
+static void
+netxen_remove_sysfs_entries(struct netxen_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct device *dev = &netdev->dev;
+
+ if (adapter->capabilities & NX_FW_CAPABILITY_BDG)
+ device_remove_file(dev, &dev_attr_bridged_mode);
+}
+
+#ifdef CONFIG_INET
+
+#define is_netxen_netdev(dev) (dev->netdev_ops == &netxen_netdev_ops)
+
+static int
+netxen_destip_supported(struct netxen_adapter *adapter)
+{
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 0;
+
+ if (adapter->ahw.cut_through)
+ return 0;
+
+ return 1;
+}
+
+static void
+netxen_config_indev_addr(struct net_device *dev, unsigned long event)
+{
+ struct in_device *indev;
+ struct netxen_adapter *adapter = netdev_priv(dev);
+
+ if (!netxen_destip_supported(adapter))
+ return;
+
+ indev = in_dev_get(dev);
+ if (!indev)
+ return;
+
+ for_ifa(indev) {
+ switch (event) {
+ case NETDEV_UP:
+ netxen_config_ipaddr(adapter,
+ ifa->ifa_address, NX_IP_UP);
+ break;
+ case NETDEV_DOWN:
+ netxen_config_ipaddr(adapter,
+ ifa->ifa_address, NX_IP_DOWN);
+ break;
+ default:
+ break;
+ }
+ } endfor_ifa(indev);
+
+ in_dev_put(indev);
+ return;
+}
+
+static int netxen_netdev_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct netxen_adapter *adapter;
+ struct net_device *dev = (struct net_device *)ptr;
+
+recheck:
+ if (dev == NULL)
+ goto done;
+
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ dev = vlan_dev_real_dev(dev);
+ goto recheck;
+ }
+
+ if (!is_netxen_netdev(dev))
+ goto done;
+
+ adapter = netdev_priv(dev);
+
+ if (!adapter)
+ goto done;
+
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ goto done;
+
+ netxen_config_indev_addr(dev, event);
+done:
+ return NOTIFY_DONE;
+}
+
+static int
+netxen_inetaddr_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct netxen_adapter *adapter;
+ struct net_device *dev;
+
+ struct in_ifaddr *ifa = (struct in_ifaddr *)ptr;
+
+ dev = ifa->ifa_dev ? ifa->ifa_dev->dev : NULL;
+
+recheck:
+ if (dev == NULL || !netif_running(dev))
+ goto done;
+
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ dev = vlan_dev_real_dev(dev);
+ goto recheck;
+ }
+
+ if (!is_netxen_netdev(dev))
+ goto done;
+
+ adapter = netdev_priv(dev);
+
+ if (!adapter || !netxen_destip_supported(adapter))
+ goto done;
+
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ goto done;
+
+ switch (event) {
+ case NETDEV_UP:
+ netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_UP);
+ break;
+ case NETDEV_DOWN:
+ netxen_config_ipaddr(adapter, ifa->ifa_address, NX_IP_DOWN);
+ break;
+ default:
+ break;
+ }
+
+done:
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block netxen_netdev_cb = {
+ .notifier_call = netxen_netdev_event,
+};
+
+static struct notifier_block netxen_inetaddr_cb = {
+ .notifier_call = netxen_inetaddr_event,
+};
+#else
+static void
+netxen_config_indev_addr(struct net_device *dev, unsigned long event)
+{ }
+#endif
+
static struct pci_driver netxen_driver = {
.name = netxen_nic_driver_name,
.id_table = netxen_pci_tbl,
@@ -1834,16 +2507,20 @@
.remove = __devexit_p(netxen_nic_remove),
#ifdef CONFIG_PM
.suspend = netxen_nic_suspend,
- .resume = netxen_nic_resume
+ .resume = netxen_nic_resume,
#endif
+ .shutdown = netxen_nic_shutdown
};
-/* Driver Registration on NetXen card */
-
static int __init netxen_init_module(void)
{
printk(KERN_INFO "%s\n", netxen_nic_driver_string);
+#ifdef CONFIG_INET
+ register_netdevice_notifier(&netxen_netdev_cb);
+ register_inetaddr_notifier(&netxen_inetaddr_cb);
+#endif
+
return pci_register_driver(&netxen_driver);
}
@@ -1852,6 +2529,11 @@
static void __exit netxen_exit_module(void)
{
pci_unregister_driver(&netxen_driver);
+
+#ifdef CONFIG_INET
+ unregister_inetaddr_notifier(&netxen_inetaddr_cb);
+ unregister_netdevice_notifier(&netxen_netdev_cb);
+#endif
}
module_exit(netxen_exit_module);
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
deleted file mode 100644
index 5941c79..0000000
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * Copyright (C) 2003 - 2009 NetXen, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
- *
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
- */
-
-#include "netxen_nic.h"
-
-#define NETXEN_GB_MAC_SOFT_RESET 0x80000000
-#define NETXEN_GB_MAC_RESET_PROT_BLK 0x000F0000
-#define NETXEN_GB_MAC_ENABLE_TX_RX 0x00000005
-#define NETXEN_GB_MAC_PAUSED_FRMS 0x00000020
-
-static long phy_lock_timeout = 100000000;
-
-static int phy_lock(struct netxen_adapter *adapter)
-{
- int i;
- int done = 0, timeout = 0;
-
- while (!done) {
- done = NXRD32(adapter, NETXEN_PCIE_REG(PCIE_SEM3_LOCK));
- if (done == 1)
- break;
- if (timeout >= phy_lock_timeout) {
- return -1;
- }
- timeout++;
- if (!in_atomic())
- schedule();
- else {
- for (i = 0; i < 20; i++)
- cpu_relax();
- }
- }
-
- NXWR32(adapter, NETXEN_PHY_LOCK_ID, PHY_LOCK_DRIVER);
- return 0;
-}
-
-static int phy_unlock(struct netxen_adapter *adapter)
-{
- adapter->pci_read_immediate(adapter, NETXEN_PCIE_REG(PCIE_SEM3_UNLOCK));
-
- return 0;
-}
-
-/*
- * netxen_niu_gbe_phy_read - read a register from the GbE PHY via
- * mii management interface.
- *
- * Note: The MII management interface goes through port 0.
- * Individual phys are addressed as follows:
- * @param phy [15:8] phy id
- * @param reg [7:0] register number
- *
- * @returns 0 on success
- * -1 on error
- *
- */
-int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
- __u32 * readval)
-{
- long timeout = 0;
- long result = 0;
- long restore = 0;
- long phy = adapter->physical_port;
- __u32 address;
- __u32 command;
- __u32 status;
- __u32 mac_cfg0;
-
- if (phy_lock(adapter) != 0) {
- return -1;
- }
-
- /*
- * MII mgmt all goes through port 0 MAC interface,
- * so it cannot be in reset
- */
-
- mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
- if (netxen_gb_get_soft_reset(mac_cfg0)) {
- __u32 temp;
- temp = 0;
- netxen_gb_tx_reset_pb(temp);
- netxen_gb_rx_reset_pb(temp);
- netxen_gb_tx_reset_mac(temp);
- netxen_gb_rx_reset_mac(temp);
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
- return -EIO;
- restore = 1;
- }
-
- address = 0;
- netxen_gb_mii_mgmt_reg_addr(address, reg);
- netxen_gb_mii_mgmt_phy_addr(address, phy);
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
- return -EIO;
- command = 0; /* turn off any prior activity */
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
- return -EIO;
- /* send read command */
- netxen_gb_mii_mgmt_set_read_cycle(command);
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
- return -EIO;
-
- status = 0;
- do {
- status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
- timeout++;
- } while ((netxen_get_gb_mii_mgmt_busy(status)
- || netxen_get_gb_mii_mgmt_notvalid(status))
- && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
-
- if (timeout < NETXEN_NIU_PHY_WAITMAX) {
- *readval = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_STATUS(0));
- result = 0;
- } else
- result = -1;
-
- if (restore)
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
- return -EIO;
- phy_unlock(adapter);
- return result;
-}
-
-/*
- * netxen_niu_gbe_phy_write - write a register to the GbE PHY via
- * mii management interface.
- *
- * Note: The MII management interface goes through port 0.
- * Individual phys are addressed as follows:
- * @param phy [15:8] phy id
- * @param reg [7:0] register number
- *
- * @returns 0 on success
- * -1 on error
- *
- */
-int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
- __u32 val)
-{
- long timeout = 0;
- long result = 0;
- long restore = 0;
- long phy = adapter->physical_port;
- __u32 address;
- __u32 command;
- __u32 status;
- __u32 mac_cfg0;
-
- /*
- * MII mgmt all goes through port 0 MAC interface, so it
- * cannot be in reset
- */
-
- mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
- if (netxen_gb_get_soft_reset(mac_cfg0)) {
- __u32 temp;
- temp = 0;
- netxen_gb_tx_reset_pb(temp);
- netxen_gb_rx_reset_pb(temp);
- netxen_gb_tx_reset_mac(temp);
- netxen_gb_rx_reset_mac(temp);
-
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
- return -EIO;
- restore = 1;
- }
-
- command = 0; /* turn off any prior activity */
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
- return -EIO;
-
- address = 0;
- netxen_gb_mii_mgmt_reg_addr(address, reg);
- netxen_gb_mii_mgmt_phy_addr(address, phy);
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
- return -EIO;
-
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), val))
- return -EIO;
-
- status = 0;
- do {
- status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
- timeout++;
- } while ((netxen_get_gb_mii_mgmt_busy(status))
- && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
-
- if (timeout < NETXEN_NIU_PHY_WAITMAX)
- result = 0;
- else
- result = -EIO;
-
- /* restore the state of port 0 MAC in case we tampered with it */
- if (restore)
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
- return -EIO;
-
- return result;
-}
-
-int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter)
-{
- NXWR32(adapter, NETXEN_NIU_INT_MASK, 0x3f);
- return 0;
-}
-
-int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter)
-{
- int result = 0;
- __u32 enable = 0;
- netxen_set_phy_int_link_status_changed(enable);
- netxen_set_phy_int_autoneg_completed(enable);
- netxen_set_phy_int_speed_changed(enable);
-
- if (0 !=
- netxen_niu_gbe_phy_write(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE,
- enable))
- result = -EIO;
-
- return result;
-}
-
-int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter)
-{
- NXWR32(adapter, NETXEN_NIU_INT_MASK, 0x7f);
- return 0;
-}
-
-int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter)
-{
- int result = 0;
- if (0 !=
- netxen_niu_gbe_phy_write(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE, 0))
- result = -EIO;
-
- return result;
-}
-
-static int netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter)
-{
- int result = 0;
- if (0 !=
- netxen_niu_gbe_phy_write(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
- -EIO))
- result = -EIO;
-
- return result;
-}
-
-/*
- * netxen_niu_gbe_set_mii_mode- Set 10/100 Mbit Mode for GbE MAC
- *
- */
-static void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter,
- int port, long enable)
-{
- NXWR32(adapter, NETXEN_NIU_MODE, 0x2);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x80000000);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x0000f0025);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), 0xf1ff);
- NXWR32(adapter, NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0);
- NXWR32(adapter, NETXEN_NIU_GB0_MII_MODE + (port << 3), 1);
- NXWR32(adapter, (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
- NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
-
- if (enable) {
- /*
- * Do NOT enable flow control until a suitable solution for
- * shutting down pause frames is found.
- */
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x5);
- }
-
- if (netxen_niu_gbe_enable_phy_interrupts(adapter))
- printk(KERN_ERR "ERROR enabling PHY interrupts\n");
- if (netxen_niu_gbe_clear_phy_interrupts(adapter))
- printk(KERN_ERR "ERROR clearing PHY interrupts\n");
-}
-
-/*
- * netxen_niu_gbe_set_gmii_mode- Set GbE Mode for GbE MAC
- */
-static void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter,
- int port, long enable)
-{
- NXWR32(adapter, NETXEN_NIU_MODE, 0x2);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x80000000);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x0000f0025);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port), 0xf2ff);
- NXWR32(adapter, NETXEN_NIU_GB0_MII_MODE + (port << 3), 0);
- NXWR32(adapter, NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1);
- NXWR32(adapter, (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
- NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
-
- if (enable) {
- /*
- * Do NOT enable flow control until a suitable solution for
- * shutting down pause frames is found.
- */
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), 0x5);
- }
-
- if (netxen_niu_gbe_enable_phy_interrupts(adapter))
- printk(KERN_ERR "ERROR enabling PHY interrupts\n");
- if (netxen_niu_gbe_clear_phy_interrupts(adapter))
- printk(KERN_ERR "ERROR clearing PHY interrupts\n");
-}
-
-int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
-{
- int result = 0;
- __u32 status;
-
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
- return 0;
-
- if (adapter->disable_phy_interrupts)
- adapter->disable_phy_interrupts(adapter);
- mdelay(2);
-
- if (0 == netxen_niu_gbe_phy_read(adapter,
- NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, &status)) {
- if (netxen_get_phy_link(status)) {
- if (netxen_get_phy_speed(status) == 2) {
- netxen_niu_gbe_set_gmii_mode(adapter, port, 1);
- } else if ((netxen_get_phy_speed(status) == 1)
- || (netxen_get_phy_speed(status) == 0)) {
- netxen_niu_gbe_set_mii_mode(adapter, port, 1);
- } else {
- result = -1;
- }
-
- } else {
- /*
- * We don't have link. Cable must be unconnected.
- * Enable phy interrupts so we take action when
- * plugged in.
- */
-
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
- NETXEN_GB_MAC_SOFT_RESET);
- NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
- NETXEN_GB_MAC_RESET_PROT_BLK |
- NETXEN_GB_MAC_ENABLE_TX_RX |
- NETXEN_GB_MAC_PAUSED_FRMS);
- if (netxen_niu_gbe_clear_phy_interrupts(adapter))
- printk(KERN_ERR
- "ERROR clearing PHY interrupts\n");
- if (netxen_niu_gbe_enable_phy_interrupts(adapter))
- printk(KERN_ERR
- "ERROR enabling PHY interrupts\n");
- if (netxen_niu_gbe_clear_phy_interrupts(adapter))
- printk(KERN_ERR
- "ERROR clearing PHY interrupts\n");
- result = -1;
- }
- } else {
- result = -EIO;
- }
- return result;
-}
-
-int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
-{
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
- NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
- NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
- }
-
- return 0;
-}
-
-/* Disable a GbE interface */
-int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
-{
- __u32 mac_cfg0;
- u32 port = adapter->physical_port;
-
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
- return 0;
-
- if (port > NETXEN_NIU_MAX_GBE_PORTS)
- return -EINVAL;
- mac_cfg0 = 0;
- netxen_gb_soft_reset(mac_cfg0);
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port), mac_cfg0))
- return -EIO;
- return 0;
-}
-
-/* Disable an XG interface */
-int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
-{
- __u32 mac_cfg;
- u32 port = adapter->physical_port;
-
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
- return 0;
-
- if (port > NETXEN_NIU_MAX_XG_PORTS)
- return -EINVAL;
-
- mac_cfg = 0;
- if (NXWR32(adapter,
- NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg))
- return -EIO;
- return 0;
-}
-
-/* Set promiscuous mode for a GbE interface */
-int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
- u32 mode)
-{
- __u32 reg;
- u32 port = adapter->physical_port;
-
- if (port > NETXEN_NIU_MAX_GBE_PORTS)
- return -EINVAL;
-
- /* save previous contents */
- reg = NXRD32(adapter, NETXEN_NIU_GB_DROP_WRONGADDR);
- if (mode == NETXEN_NIU_PROMISC_MODE) {
- switch (port) {
- case 0:
- netxen_clear_gb_drop_gb0(reg);
- break;
- case 1:
- netxen_clear_gb_drop_gb1(reg);
- break;
- case 2:
- netxen_clear_gb_drop_gb2(reg);
- break;
- case 3:
- netxen_clear_gb_drop_gb3(reg);
- break;
- default:
- return -EIO;
- }
- } else {
- switch (port) {
- case 0:
- netxen_set_gb_drop_gb0(reg);
- break;
- case 1:
- netxen_set_gb_drop_gb1(reg);
- break;
- case 2:
- netxen_set_gb_drop_gb2(reg);
- break;
- case 3:
- netxen_set_gb_drop_gb3(reg);
- break;
- default:
- return -EIO;
- }
- }
- if (NXWR32(adapter, NETXEN_NIU_GB_DROP_WRONGADDR, reg))
- return -EIO;
- return 0;
-}
-
-int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
- u32 mode)
-{
- __u32 reg;
- u32 port = adapter->physical_port;
-
- if (port > NETXEN_NIU_MAX_XG_PORTS)
- return -EINVAL;
-
- reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
- if (mode == NETXEN_NIU_PROMISC_MODE)
- reg = (reg | 0x2000UL);
- else
- reg = (reg & ~0x2000UL);
-
- if (mode == NETXEN_NIU_ALLMULTI_MODE)
- reg = (reg | 0x1000UL);
- else
- reg = (reg & ~0x1000UL);
-
- NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
-
- return 0;
-}
-
-int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
-{
- u32 mac_hi, mac_lo;
- u32 reg_hi, reg_lo;
-
- u8 phy = adapter->physical_port;
- u8 phy_count = (adapter->ahw.port_type == NETXEN_NIC_XGBE) ?
- NETXEN_NIU_MAX_XG_PORTS : NETXEN_NIU_MAX_GBE_PORTS;
-
- if (phy >= phy_count)
- return -EINVAL;
-
- mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24);
- mac_hi = addr[2] | ((u32)addr[3] << 8) |
- ((u32)addr[4] << 16) | ((u32)addr[5] << 24);
-
- if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
- reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy);
- reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy);
- } else {
- reg_lo = NETXEN_NIU_GB_STATION_ADDR_1(phy);
- reg_hi = NETXEN_NIU_GB_STATION_ADDR_0(phy);
- }
-
- /* write twice to flush */
- if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
- return -EIO;
- if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
- return -EIO;
-
- return 0;
-}
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
deleted file mode 100644
index b73a62c..0000000
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2003 - 2009 NetXen, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
- *
- * Contact Information:
- * info@netxen.com
- * NetXen Inc,
- * 18922 Forge Drive
- * Cupertino, CA 95014-0701
- *
- */
-
-#ifndef __NIC_PHAN_REG_H_
-#define __NIC_PHAN_REG_H_
-
-/*
- * CRB Registers or queue message done only at initialization time.
- */
-#define NIC_CRB_BASE NETXEN_CAM_RAM(0x200)
-#define NETXEN_NIC_REG(X) (NIC_CRB_BASE+(X))
-#define NIC_CRB_BASE_2 NETXEN_CAM_RAM(0x700)
-#define NETXEN_NIC_REG_2(X) (NIC_CRB_BASE_2+(X))
-
-#define CRB_PHAN_CNTRL_LO_OFFSET NETXEN_NIC_REG(0x00)
-#define CRB_PHAN_CNTRL_HI_OFFSET NETXEN_NIC_REG(0x04)
-#define CRB_CMD_PRODUCER_OFFSET NETXEN_NIC_REG(0x08)
-#define CRB_CMD_CONSUMER_OFFSET NETXEN_NIC_REG(0x0c)
-#define CRB_PAUSE_ADDR_LO NETXEN_NIC_REG(0x10)
-#define CRB_PAUSE_ADDR_HI NETXEN_NIC_REG(0x14)
-#define NX_CDRP_CRB_OFFSET NETXEN_NIC_REG(0x18)
-#define NX_ARG1_CRB_OFFSET NETXEN_NIC_REG(0x1c)
-#define NX_ARG2_CRB_OFFSET NETXEN_NIC_REG(0x20)
-#define NX_ARG3_CRB_OFFSET NETXEN_NIC_REG(0x24)
-#define NX_SIGN_CRB_OFFSET NETXEN_NIC_REG(0x28)
-#define CRB_CMD_INTR_LOOP NETXEN_NIC_REG(0x20)
-#define CRB_CMD_DMA_LOOP NETXEN_NIC_REG(0x24)
-#define CRB_RCV_INTR_LOOP NETXEN_NIC_REG(0x28)
-#define CRB_RCV_DMA_LOOP NETXEN_NIC_REG(0x2c)
-#define CRB_ENABLE_TX_INTR NETXEN_NIC_REG(0x30)
-#define CRB_MMAP_ADDR_3 NETXEN_NIC_REG(0x34)
-#define CRB_CMDPEG_CMDRING NETXEN_NIC_REG(0x38)
-#define CRB_HOST_DUMMY_BUF_ADDR_HI NETXEN_NIC_REG(0x3c)
-#define CRB_HOST_DUMMY_BUF_ADDR_LO NETXEN_NIC_REG(0x40)
-#define CRB_MMAP_ADDR_0 NETXEN_NIC_REG(0x44)
-#define CRB_MMAP_ADDR_1 NETXEN_NIC_REG(0x48)
-#define CRB_MMAP_ADDR_2 NETXEN_NIC_REG(0x4c)
-#define CRB_CMDPEG_STATE NETXEN_NIC_REG(0x50)
-#define CRB_MMAP_SIZE_0 NETXEN_NIC_REG(0x54)
-#define CRB_MMAP_SIZE_1 NETXEN_NIC_REG(0x58)
-#define CRB_MMAP_SIZE_2 NETXEN_NIC_REG(0x5c)
-#define CRB_MMAP_SIZE_3 NETXEN_NIC_REG(0x60)
-#define CRB_GLOBAL_INT_COAL NETXEN_NIC_REG(0x64)
-#define CRB_INT_COAL_MODE NETXEN_NIC_REG(0x68)
-#define CRB_MAX_RCV_BUFS NETXEN_NIC_REG(0x6c)
-#define CRB_TX_INT_THRESHOLD NETXEN_NIC_REG(0x70)
-#define CRB_RX_PKT_TIMER NETXEN_NIC_REG(0x74)
-#define CRB_TX_PKT_TIMER NETXEN_NIC_REG(0x78)
-#define CRB_RX_PKT_CNT NETXEN_NIC_REG(0x7c)
-#define CRB_RX_TMR_CNT NETXEN_NIC_REG(0x80)
-#define CRB_RX_LRO_TIMER NETXEN_NIC_REG(0x84)
-#define CRB_RX_LRO_MID_TIMER NETXEN_NIC_REG(0x88)
-#define CRB_DMA_MAX_RCV_BUFS NETXEN_NIC_REG(0x8c)
-#define CRB_MAX_DMA_ENTRIES NETXEN_NIC_REG(0x90)
-#define CRB_XG_STATE NETXEN_NIC_REG(0x94) /* XG Link status */
-#define CRB_XG_STATE_P3 NETXEN_NIC_REG(0x98) /* XG PF Link status */
-#define CRB_AGENT_TX_SIZE NETXEN_NIC_REG(0x9c)
-#define CRB_AGENT_TX_TYPE NETXEN_NIC_REG(0xa0)
-#define CRB_AGENT_TX_ADDR NETXEN_NIC_REG(0xa4)
-#define CRB_AGENT_TX_MSS NETXEN_NIC_REG(0xa8)
-#define CRB_TX_STATE NETXEN_NIC_REG(0xac)
-#define CRB_TX_COUNT NETXEN_NIC_REG(0xb0)
-#define CRB_RX_STATE NETXEN_NIC_REG(0xb4)
-#define CRB_RX_PERF_DEBUG_1 NETXEN_NIC_REG(0xb8)
-#define CRB_RX_LRO_CONTROL NETXEN_NIC_REG(0xbc)
-#define CRB_RX_LRO_START_NUM NETXEN_NIC_REG(0xc0)
-#define CRB_MPORT_MODE NETXEN_NIC_REG(0xc4)
-#define CRB_CMD_RING_SIZE NETXEN_NIC_REG(0xc8)
-#define CRB_DMA_SHIFT NETXEN_NIC_REG(0xcc)
-#define CRB_INT_VECTOR NETXEN_NIC_REG(0xd4)
-#define CRB_CTX_RESET NETXEN_NIC_REG(0xd8)
-#define CRB_HOST_STS_PROD NETXEN_NIC_REG(0xdc)
-#define CRB_HOST_STS_CONS NETXEN_NIC_REG(0xe0)
-#define CRB_PEG_CMD_PROD NETXEN_NIC_REG(0xe4)
-#define CRB_PF_LINK_SPEED_1 NETXEN_NIC_REG(0xe8)
-#define CRB_PF_LINK_SPEED_2 NETXEN_NIC_REG(0xec)
-#define CRB_HOST_BUFFER_CONS NETXEN_NIC_REG(0xf0)
-#define CRB_JUMBO_BUFFER_PROD NETXEN_NIC_REG(0xf4)
-#define CRB_JUMBO_BUFFER_CONS NETXEN_NIC_REG(0xf8)
-#define CRB_HOST_DUMMY_BUF NETXEN_NIC_REG(0xfc)
-
-#define CRB_RCVPEG_STATE NETXEN_NIC_REG(0x13c)
-#define CRB_CMD_PRODUCER_OFFSET_1 NETXEN_NIC_REG(0x1ac)
-#define CRB_CMD_CONSUMER_OFFSET_1 NETXEN_NIC_REG(0x1b0)
-#define CRB_CMD_PRODUCER_OFFSET_2 NETXEN_NIC_REG(0x1b8)
-#define CRB_CMD_CONSUMER_OFFSET_2 NETXEN_NIC_REG(0x1bc)
-#define CRB_CMD_PRODUCER_OFFSET_3 NETXEN_NIC_REG(0x1d0)
-#define CRB_CMD_CONSUMER_OFFSET_3 NETXEN_NIC_REG(0x1d4)
-#define CRB_TEMP_STATE NETXEN_NIC_REG(0x1b4)
-
-#define CRB_V2P_0 NETXEN_NIC_REG(0x290)
-#define CRB_V2P_1 NETXEN_NIC_REG(0x294)
-#define CRB_V2P_2 NETXEN_NIC_REG(0x298)
-#define CRB_V2P_3 NETXEN_NIC_REG(0x29c)
-#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
-#define CRB_DRIVER_VERSION NETXEN_NIC_REG(0x2a0)
-#define CRB_SW_INT_MASK_0 NETXEN_NIC_REG(0x1d8)
-#define CRB_SW_INT_MASK_1 NETXEN_NIC_REG(0x1e0)
-#define CRB_SW_INT_MASK_2 NETXEN_NIC_REG(0x1e4)
-#define CRB_SW_INT_MASK_3 NETXEN_NIC_REG(0x1e8)
-
-#define CRB_FW_CAPABILITIES_1 NETXEN_CAM_RAM(0x128)
-#define CRB_MAC_BLOCK_START NETXEN_CAM_RAM(0x1c0)
-
-/*
- * capabilities register, can be used to selectively enable/disable features
- * for backward compability
- */
-#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
-#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
-#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
-#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
-
-#define INTR_SCHEME_PERPORT 0x1
-#define MSI_MODE_MULTIFUNC 0x1
-
-/* used for ethtool tests */
-#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
-
-/*
- * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
- * which can be read by the Phantom host to get producer/consumer indexes from
- * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
- * registers will be used for the addresses of the ring's shared memory
- * on the Phantom.
- */
-
-#define nx_get_temp_val(x) ((x) >> 16)
-#define nx_get_temp_state(x) ((x) & 0xffff)
-#define nx_encode_temp(val, state) (((val) << 16) | (state))
-
-/*
- * CRB registers used by the receive peg logic.
- */
-
-struct netxen_recv_crb {
- u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
- u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
- u32 sw_int_mask[NUM_STS_DESC_RINGS];
-};
-
-/*
- * Temperature control.
- */
-enum {
- NX_TEMP_NORMAL = 0x1, /* Normal operating range */
- NX_TEMP_WARN, /* Sound alert, temperature getting high */
- NX_TEMP_PANIC /* Fatal error, hardware has shut down. */
-};
-
-#endif /* __NIC_PHAN_REG_H_ */
diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
index 2a8da47..462d20f 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ni5010.c
@@ -463,7 +463,7 @@
hardware_send_packet(dev, (unsigned char *)skb->data, skb->len, length-skb->len);
dev->trans_start = jiffies;
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index 77d44a0..bd0ac69 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -170,7 +170,7 @@
static irqreturn_t ni52_interrupt(int irq, void *dev_id);
static int ni52_open(struct net_device *dev);
static int ni52_close(struct net_device *dev);
-static int ni52_send_packet(struct sk_buff *, struct net_device *);
+static netdev_tx_t ni52_send_packet(struct sk_buff *, struct net_device *);
static struct net_device_stats *ni52_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void ni52_timeout(struct net_device *dev);
@@ -1173,7 +1173,8 @@
* send frame
*/
-static int ni52_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ni52_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
int len, i;
#ifndef NO_NOPCOMMANDS
@@ -1183,7 +1184,7 @@
if (skb->len > XMIT_BUFF_SIZE) {
printk(KERN_ERR "%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n", dev->name, XMIT_BUFF_SIZE, skb->len);
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue(dev);
@@ -1267,7 +1268,7 @@
}
dev_kfree_skb(skb);
#endif
- return 0;
+ return NETDEV_TX_OK;
}
/*******************************************
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 1f10ed6..752c2e4 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -252,7 +252,8 @@
static int ni65_open(struct net_device *dev);
static int ni65_lance_reinit(struct net_device *dev);
static void ni65_init_lance(struct priv *p,unsigned char*,int,int);
-static int ni65_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ni65_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static void ni65_timeout(struct net_device *dev);
static int ni65_close(struct net_device *dev);
static int ni65_alloc_buffer(struct net_device *dev);
@@ -1157,7 +1158,8 @@
* Send a packet
*/
-static int ni65_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ni65_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct priv *p = dev->ml_priv;
@@ -1216,7 +1218,7 @@
spin_unlock_irqrestore(&p->ring_lock, flags);
}
- return 0;
+ return NETDEV_TX_OK;
}
static void set_multicast_list(struct net_device *dev)
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d2146d4..76cc261 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -4015,7 +4015,7 @@
mp->rx_hist_cnt6 += RXMAC_HIST_CNT6_COUNT;
if (val & XRXMAC_STATUS_RXHIST7_CNT_EXP)
mp->rx_hist_cnt7 += RXMAC_HIST_CNT7_COUNT;
- if (val & XRXMAC_STAT_MSK_RXOCTET_CNT_EXP)
+ if (val & XRXMAC_STATUS_RXOCTET_CNT_EXP)
mp->rx_octets += RXMAC_BT_CNT_COUNT;
if (val & XRXMAC_STATUS_CVIOLERR_CNT_EXP)
mp->rx_code_violations += RXMAC_CD_VIO_CNT_COUNT;
@@ -6657,7 +6657,8 @@
return ret;
}
-static int niu_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t niu_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct niu *np = netdev_priv(dev);
unsigned long align, headroom;
@@ -10144,11 +10145,6 @@
.unmap_single = niu_phys_unmap_single,
};
-static unsigned long res_size(struct resource *r)
-{
- return r->end - r->start + 1UL;
-}
-
static int __devinit niu_of_probe(struct of_device *op,
const struct of_device_id *match)
{
@@ -10188,7 +10184,7 @@
dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM);
np->regs = of_ioremap(&op->resource[1], 0,
- res_size(&op->resource[1]),
+ resource_size(&op->resource[1]),
"niu regs");
if (!np->regs) {
dev_err(&op->dev, PFX "Cannot map device registers, "
@@ -10198,7 +10194,7 @@
}
np->vir_regs_1 = of_ioremap(&op->resource[2], 0,
- res_size(&op->resource[2]),
+ resource_size(&op->resource[2]),
"niu vregs-1");
if (!np->vir_regs_1) {
dev_err(&op->dev, PFX "Cannot map device vir registers 1, "
@@ -10208,7 +10204,7 @@
}
np->vir_regs_2 = of_ioremap(&op->resource[3], 0,
- res_size(&op->resource[3]),
+ resource_size(&op->resource[3]),
"niu vregs-2");
if (!np->vir_regs_2) {
dev_err(&op->dev, PFX "Cannot map device vir registers 2, "
@@ -10243,19 +10239,19 @@
err_out_iounmap:
if (np->vir_regs_1) {
of_iounmap(&op->resource[2], np->vir_regs_1,
- res_size(&op->resource[2]));
+ resource_size(&op->resource[2]));
np->vir_regs_1 = NULL;
}
if (np->vir_regs_2) {
of_iounmap(&op->resource[3], np->vir_regs_2,
- res_size(&op->resource[3]));
+ resource_size(&op->resource[3]));
np->vir_regs_2 = NULL;
}
if (np->regs) {
of_iounmap(&op->resource[1], np->regs,
- res_size(&op->resource[1]));
+ resource_size(&op->resource[1]));
np->regs = NULL;
}
@@ -10280,19 +10276,19 @@
if (np->vir_regs_1) {
of_iounmap(&op->resource[2], np->vir_regs_1,
- res_size(&op->resource[2]));
+ resource_size(&op->resource[2]));
np->vir_regs_1 = NULL;
}
if (np->vir_regs_2) {
of_iounmap(&op->resource[3], np->vir_regs_2,
- res_size(&op->resource[3]));
+ resource_size(&op->resource[3]));
np->vir_regs_2 = NULL;
}
if (np->regs) {
of_iounmap(&op->resource[1], np->regs,
- res_size(&op->resource[1]));
+ resource_size(&op->resource[1]));
np->regs = NULL;
}
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 1576ac0..c594e19 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1077,7 +1077,8 @@
* while trying to track down a bug in either the zero copy code or
* the tx fifo (hence the MAX_FRAG_LEN).
*/
-static int ns83820_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
u32 free_idx, cmdsts, extsts;
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 89f7b2a..0c44b48 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1356,7 +1356,7 @@
DPRINTK ("%s: Queued Tx packet at %p size %u to slot %d.\n",
dev->name, skb->data, skb->len, entry);
- return 0;
+ return NETDEV_TX_OK;
}
@@ -1784,11 +1784,6 @@
break;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable (CAP_NET_ADMIN)) {
- rc = -EPERM;
- break;
- }
-
spin_lock_irqsave (&tp->lock, flags);
mdio_write (dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
spin_unlock_irqrestore (&tp->lock, flags);
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index f35c609..ee8ad3e 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -85,6 +85,7 @@
#include <linux/ioport.h>
#include <linux/ethtool.h>
#include <linux/bitops.h>
+#include <linux/mii.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -239,7 +240,8 @@
static void tc574_reset(struct net_device *dev);
static void media_check(unsigned long arg);
static int el3_open(struct net_device *dev);
-static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t el3_interrupt(int irq, void *dev_id);
static void update_stats(struct net_device *dev);
static struct net_device_stats *el3_get_stats(struct net_device *dev);
@@ -778,7 +780,8 @@
}
}
-static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
struct el3_private *lp = netdev_priv(dev);
@@ -806,7 +809,7 @@
pop_tx_status(dev);
spin_unlock_irqrestore(&lp->window_lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* The EL3 interrupt handler. */
@@ -1094,16 +1097,16 @@
{
struct el3_private *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- u16 *data = (u16 *)&rq->ifr_ifru;
+ struct mii_ioctl_data *data = if_mii(rq);
int phy = lp->phys & 0x1f;
DEBUG(2, "%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
dev->name, rq->ifr_ifrn.ifrn_name, cmd,
- data[0], data[1], data[2], data[3]);
+ data->phy_id, data->reg_num, data->val_in, data->val_out);
switch(cmd) {
case SIOCGMIIPHY: /* Get the address of the PHY in use. */
- data[0] = phy;
+ data->phy_id = phy;
case SIOCGMIIREG: /* Read the specified MII register. */
{
int saved_window;
@@ -1112,7 +1115,8 @@
spin_lock_irqsave(&lp->window_lock, flags);
saved_window = inw(ioaddr + EL3_CMD) >> 13;
EL3WINDOW(4);
- data[3] = mdio_read(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
+ data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f,
+ data->reg_num & 0x1f);
EL3WINDOW(saved_window);
spin_unlock_irqrestore(&lp->window_lock, flags);
return 0;
@@ -1122,12 +1126,11 @@
int saved_window;
unsigned long flags;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
spin_lock_irqsave(&lp->window_lock, flags);
saved_window = inw(ioaddr + EL3_CMD) >> 13;
EL3WINDOW(4);
- mdio_write(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+ mdio_write(ioaddr, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
EL3WINDOW(saved_window);
spin_unlock_irqrestore(&lp->window_lock, flags);
return 0;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 690b9c7..569fb06 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -149,7 +149,8 @@
static void media_check(unsigned long arg);
static int el3_config(struct net_device *dev, struct ifmap *map);
static int el3_open(struct net_device *dev);
-static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t el3_interrupt(int irq, void *dev_id);
static void update_stats(struct net_device *dev);
static struct net_device_stats *el3_get_stats(struct net_device *dev);
@@ -604,7 +605,8 @@
}
}
-static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
struct el3_private *priv = netdev_priv(dev);
@@ -635,7 +637,7 @@
spin_unlock_irqrestore(&priv->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* The EL3 interrupt handler. */
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 0e38d80..3131a59 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -37,6 +37,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/crc32.h>
+#include <linux/mii.h>
#include "../8390.h"
#include <pcmcia/cs_types.h>
@@ -92,7 +93,8 @@
static int axnet_open(struct net_device *dev);
static int axnet_close(struct net_device *dev);
static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int axnet_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t axnet_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static struct net_device_stats *get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void axnet_tx_timeout(struct net_device *dev);
@@ -696,18 +698,16 @@
static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
axnet_dev_t *info = PRIV(dev);
- u16 *data = (u16 *)&rq->ifr_ifru;
+ struct mii_ioctl_data *data = if_mii(rq);
unsigned int mii_addr = dev->base_addr + AXNET_MII_EEP;
switch (cmd) {
case SIOCGMIIPHY:
- data[0] = info->phy_id;
+ data->phy_id = info->phy_id;
case SIOCGMIIREG: /* Read MII PHY register. */
- data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f);
+ data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f);
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]);
+ mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in);
return 0;
}
return -EOPNOTSUPP;
@@ -893,8 +893,6 @@
#include <linux/in.h>
#include <linux/interrupt.h>
-#include <linux/etherdevice.h>
-
#define BUG_83C690
/* These are the operational function interfaces to board-specific
@@ -1065,7 +1063,8 @@
* Sends a packet to an 8390 network device.
*/
-static int axnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t axnet_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
long e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
@@ -1179,7 +1178,7 @@
dev_kfree_skb (skb);
dev->stats.tx_bytes += send_length;
- return 0;
+ return NETDEV_TX_OK;
}
/**
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 479d5b4..7e01fbd 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -96,7 +96,8 @@
static int fjn_config(struct net_device *dev, struct ifmap *map);
static int fjn_open(struct net_device *dev);
static int fjn_close(struct net_device *dev);
-static int fjn_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t fjn_interrupt(int irq, void *dev_id);
static void fjn_rx(struct net_device *dev);
static void fjn_reset(struct net_device *dev);
@@ -856,7 +857,8 @@
netif_wake_queue(dev);
}
-static int fjn_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
@@ -865,7 +867,7 @@
if (length < ETH_ZLEN)
{
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
@@ -924,7 +926,7 @@
}
dev_kfree_skb (skb);
- return 0;
+ return NETDEV_TX_OK;
} /* fjn_start_xmit */
/*====================================================================*/
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 36de91b..5ed6339 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -424,7 +424,8 @@
static int mace_config(struct net_device *dev, struct ifmap *map);
static int mace_open(struct net_device *dev);
static int mace_close(struct net_device *dev);
-static int mace_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static void mace_tx_timeout(struct net_device *dev);
static irqreturn_t mace_interrupt(int irq, void *dev_id);
static struct net_device_stats *mace_get_stats(struct net_device *dev);
@@ -937,7 +938,8 @@
netif_wake_queue(dev);
}
-static int mace_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
mace_private *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
@@ -990,7 +992,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} /* mace_start_xmit */
/* ----------------------------------------------------------------------------
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9ef1c1b..90a94d2 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -40,6 +40,7 @@
#include <linux/netdevice.h>
#include <linux/log2.h>
#include <linux/etherdevice.h>
+#include <linux/mii.h>
#include "../8390.h"
#include <pcmcia/cs_types.h>
@@ -1191,7 +1192,7 @@
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
pcnet_dev_t *info = PRIV(dev);
- u16 *data = (u16 *)&rq->ifr_ifru;
+ struct mii_ioctl_data *data = if_mii(rq);
unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
if (!(info->flags & (IS_DL10019|IS_DL10022)))
@@ -1199,14 +1200,12 @@
switch (cmd) {
case SIOCGMIIPHY:
- data[0] = info->phy_id;
+ data->phy_id = info->phy_id;
case SIOCGMIIREG: /* Read MII PHY register. */
- data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f);
+ data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f);
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]);
+ mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in);
return 0;
}
return -EOPNOTSUPP;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 37e05d3..7bde2cd 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -288,7 +288,8 @@
static int smc_close(struct net_device *dev);
static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static void smc_tx_timeout(struct net_device *dev);
-static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t smc_interrupt(int irq, void *dev_id);
static void smc_rx(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
@@ -1370,7 +1371,8 @@
netif_wake_queue(dev);
}
-static int smc_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
@@ -1399,7 +1401,7 @@
dev_kfree_skb (skb);
smc->saved_skb = NULL;
dev->stats.tx_dropped++;
- return 0; /* Do not re-queue this packet. */
+ return NETDEV_TX_OK; /* Do not re-queue this packet. */
}
/* A packet is now waiting. */
smc->packets_waiting++;
@@ -1422,7 +1424,7 @@
outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
smc_hardware_send_packet(dev); /* Send the packet now.. */
spin_unlock_irqrestore(&smc->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
}
@@ -1431,7 +1433,7 @@
outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
spin_unlock_irqrestore(&smc->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/*======================================================================
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index ef37d22..cf84231 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -80,6 +80,7 @@
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/bitops.h>
+#include <linux/mii.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -352,7 +353,8 @@
/****************
* Some more prototypes
*/
-static int do_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t do_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static void xirc_tx_timeout(struct net_device *dev);
static void xirc2ps_tx_timeout_task(struct work_struct *work);
static void set_addresses(struct net_device *dev);
@@ -1361,7 +1363,7 @@
schedule_work(&lp->tx_timeout_task);
}
-static int
+static netdev_tx_t
do_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
local_info_t *lp = netdev_priv(dev);
@@ -1384,7 +1386,7 @@
if (pktlen < ETH_ZLEN)
{
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
pktlen = ETH_ZLEN;
}
@@ -1414,7 +1416,7 @@
dev->trans_start = jiffies;
dev->stats.tx_bytes += pktlen;
netif_start_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
/****************
@@ -1557,26 +1559,26 @@
{
local_info_t *local = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
- u16 *data = (u16 *)&rq->ifr_ifru;
+ struct mii_ioctl_data *data = if_mii(rq);
DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
dev->name, rq->ifr_ifrn.ifrn_name, cmd,
- data[0], data[1], data[2], data[3]);
+ data->phy_id, data->reg_num, data->val_in, data->val_out);
if (!local->mohawk)
return -EOPNOTSUPP;
switch(cmd) {
case SIOCGMIIPHY: /* Get the address of the PHY in use. */
- data[0] = 0; /* we have only this address */
+ data->phy_id = 0; /* we have only this address */
/* fall through */
case SIOCGMIIREG: /* Read the specified MII register. */
- data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
+ data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
+ data->reg_num & 0x1f);
break;
case SIOCSMIIREG: /* Write the specified MII register */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- mii_wr(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2], 16);
+ mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
+ 16);
break;
default:
return -EOPNOTSUPP;
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 23e1a07..6d28b18 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -303,7 +303,8 @@
static int pcnet32_probe1(unsigned long, int, struct pci_dev *);
static int pcnet32_open(struct net_device *);
static int pcnet32_init_ring(struct net_device *);
-static int pcnet32_start_xmit(struct sk_buff *, struct net_device *);
+static netdev_tx_t pcnet32_start_xmit(struct sk_buff *,
+ struct net_device *);
static void pcnet32_tx_timeout(struct net_device *dev);
static irqreturn_t pcnet32_interrupt(int, void *);
static int pcnet32_close(struct net_device *);
@@ -2481,7 +2482,8 @@
spin_unlock_irqrestore(&lp->lock, flags);
}
-static int pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t pcnet32_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct pcnet32_private *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
@@ -2534,7 +2536,7 @@
netif_stop_queue(dev);
}
spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* The PCNET32 interrupt handler. */
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index de9cf51..d5d8e1c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -56,6 +56,12 @@
Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
and BCM5482 PHYs.
+config BCM63XX_PHY
+ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
+ ---help---
+ Currently supports the 6348 and 6358 PHYs.
+
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 3a1bfef..edfaac4 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
new file mode 100644
index 0000000..4fed95e
--- /dev/null
+++ b/drivers/net/phy/bcm63xx.c
@@ -0,0 +1,132 @@
+/*
+ * Driver for Broadcom 63xx SOCs integrated PHYs
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define MII_BCM63XX_IR 0x1a /* interrupt register */
+#define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */
+#define MII_BCM63XX_IR_DUPLEX 0x0800 /* duplex changed */
+#define MII_BCM63XX_IR_SPEED 0x0400 /* speed changed */
+#define MII_BCM63XX_IR_LINK 0x0200 /* link changed */
+#define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */
+
+MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_LICENSE("GPL");
+
+static int bcm63xx_config_init(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ /* Mask interrupts globally. */
+ reg |= MII_BCM63XX_IR_GMASK;
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ if (err < 0)
+ return err;
+
+ /* Unmask events we are interested in */
+ reg = ~(MII_BCM63XX_IR_DUPLEX |
+ MII_BCM63XX_IR_SPEED |
+ MII_BCM63XX_IR_LINK) |
+ MII_BCM63XX_IR_EN;
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int bcm63xx_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int bcm63xx_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BCM63XX_IR_GMASK;
+ else
+ reg |= MII_BCM63XX_IR_GMASK;
+
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ return err;
+}
+
+static struct phy_driver bcm63xx_1_driver = {
+ .phy_id = 0x00406000,
+ .phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (1)",
+ /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = bcm63xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm63xx_ack_interrupt,
+ .config_intr = bcm63xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+};
+
+/* same phy as above, with just a different OUI */
+static struct phy_driver bcm63xx_2_driver = {
+ .phy_id = 0x002bdc00,
+ .phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (2)",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = bcm63xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm63xx_ack_interrupt,
+ .config_intr = bcm63xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+};
+
+static int __init bcm63xx_phy_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&bcm63xx_1_driver);
+ if (ret)
+ goto out_63xx_1;
+ ret = phy_driver_register(&bcm63xx_2_driver);
+ if (ret)
+ goto out_63xx_2;
+ return ret;
+
+out_63xx_2:
+ phy_driver_unregister(&bcm63xx_1_driver);
+out_63xx_1:
+ return ret;
+}
+
+static void __exit bcm63xx_phy_exit(void)
+{
+ phy_driver_unregister(&bcm63xx_1_driver);
+ phy_driver_unregister(&bcm63xx_2_driver);
+}
+
+module_init(bcm63xx_phy_init);
+module_exit(bcm63xx_phy_exit);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 190efc3..f81e532 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -18,6 +18,12 @@
#include <linux/phy.h>
#define PHY_ID_BCM50610 0x0143bd60
+#define PHY_ID_BCM50610M 0x0143bd70
+#define PHY_ID_BCM57780 0x03625d90
+
+#define BRCM_PHY_MODEL(phydev) \
+ ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+
#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */
#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */
@@ -117,6 +123,7 @@
#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200
#define MII_BCM54XX_EXP_EXP75 0x0f75
#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c
+#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001
#define MII_BCM54XX_EXP_EXP96 0x0f96
#define MII_BCM54XX_EXP_EXP96_MYST 0x0010
#define MII_BCM54XX_EXP_EXP97 0x0f97
@@ -141,6 +148,35 @@
#define PHY_BCM_FLAGS_MODE_1000BX 0x00000002
#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001
+
+/*****************************************************************************/
+/* Fast Ethernet Transceiver definitions. */
+/*****************************************************************************/
+
+#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */
+#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */
+#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */
+#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */
+#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */
+#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */
+
+#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */
+#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */
+
+
+/*** Shadow register definitions ***/
+
+#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */
+#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */
+
+#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */
+#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003
+#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
+
+#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */
+#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */
+
+
MODULE_DESCRIPTION("Broadcom PHY driver");
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");
@@ -164,7 +200,7 @@
}
/* Indirect register access functions for the Expansion Registers */
-static int bcm54xx_exp_read(struct phy_device *phydev, u8 regnum)
+static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum)
{
int val;
@@ -278,6 +314,33 @@
return err;
}
+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+ int err2;
+
+ err = bcm54xx_auxctl_write(phydev,
+ MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+ MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
+ MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+ if (err < 0)
+ return err;
+
+ reg = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
+ if (reg < 0)
+ goto error;
+
+ reg |= MII_BCM54XX_EXP_EXP75_CM_OSC;
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, reg);
+
+error:
+ err2 = bcm54xx_auxctl_write(phydev,
+ MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+ MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+ if (err)
+ return err;
+ if (err2)
+ return err2;
+ }
+
return 0;
}
@@ -435,6 +498,114 @@
return ret;
}
+static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
+{
+ int val;
+
+ val = phy_read(phydev, reg);
+ if (val < 0)
+ return val;
+
+ return phy_write(phydev, reg, val | set);
+}
+
+static int brcm_fet_config_init(struct phy_device *phydev)
+{
+ int reg, err, err2, brcmtest;
+
+ /* Reset the PHY to bring it to a known state. */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+ if (reg < 0)
+ return reg;
+
+ /* Unmask events we are interested in and mask interrupts globally. */
+ reg = MII_BRCM_FET_IR_DUPLEX_EN |
+ MII_BRCM_FET_IR_SPEED_EN |
+ MII_BRCM_FET_IR_LINK_EN |
+ MII_BRCM_FET_IR_ENABLE |
+ MII_BRCM_FET_IR_MASK;
+
+ err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+ if (err < 0)
+ return err;
+
+ /* Enable shadow register access */
+ brcmtest = phy_read(phydev, MII_BRCM_FET_BRCMTEST);
+ if (brcmtest < 0)
+ return brcmtest;
+
+ reg = brcmtest | MII_BRCM_FET_BT_SRE;
+
+ err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+ if (err < 0)
+ return err;
+
+ /* Set the LED mode */
+ reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+ if (reg < 0) {
+ err = reg;
+ goto done;
+ }
+
+ reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
+ reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+
+ err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
+ if (err < 0)
+ goto done;
+
+ /* Enable auto MDIX */
+ err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+ MII_BRCM_FET_SHDW_MC_FAME);
+ if (err < 0)
+ goto done;
+
+ /* Enable auto power down */
+ err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+ MII_BRCM_FET_SHDW_AS2_APDE);
+
+done:
+ /* Disable shadow register access */
+ err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+ if (!err)
+ err = err2;
+
+ return err;
+}
+
+static int brcm_fet_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int brcm_fet_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BRCM_FET_IR_MASK;
+ else
+ reg |= MII_BRCM_FET_IR_MASK;
+
+ err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+ return err;
+}
+
static struct phy_driver bcm5411_driver = {
.phy_id = 0x00206070,
.phy_id_mask = 0xfffffff0,
@@ -447,7 +618,7 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm5421_driver = {
@@ -462,7 +633,7 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm5461_driver = {
@@ -477,7 +648,7 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm5464_driver = {
@@ -492,7 +663,7 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm5481_driver = {
@@ -507,7 +678,7 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm5482_driver = {
@@ -522,7 +693,7 @@
.read_status = bcm5482_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm50610_driver = {
@@ -537,11 +708,26 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
+};
+
+static struct phy_driver bcm50610m_driver = {
+ .phy_id = PHY_ID_BCM50610M,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM50610M",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
};
static struct phy_driver bcm57780_driver = {
- .phy_id = 0x03625d90,
+ .phy_id = PHY_ID_BCM57780,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM57780",
.features = PHY_GBIT_FEATURES |
@@ -552,7 +738,22 @@
.read_status = genphy_read_status,
.ack_interrupt = bcm54xx_ack_interrupt,
.config_intr = bcm54xx_config_intr,
- .driver = { .owner = THIS_MODULE },
+ .driver = { .owner = THIS_MODULE },
+};
+
+static struct phy_driver bcmac131_driver = {
+ .phy_id = 0x0143bc70,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCMAC131",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = brcm_fet_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = brcm_fet_ack_interrupt,
+ .config_intr = brcm_fet_config_intr,
+ .driver = { .owner = THIS_MODULE },
};
static int __init broadcom_init(void)
@@ -580,12 +781,22 @@
ret = phy_driver_register(&bcm50610_driver);
if (ret)
goto out_50610;
+ ret = phy_driver_register(&bcm50610m_driver);
+ if (ret)
+ goto out_50610m;
ret = phy_driver_register(&bcm57780_driver);
if (ret)
goto out_57780;
+ ret = phy_driver_register(&bcmac131_driver);
+ if (ret)
+ goto out_ac131;
return ret;
+out_ac131:
+ phy_driver_unregister(&bcm57780_driver);
out_57780:
+ phy_driver_unregister(&bcm50610m_driver);
+out_50610m:
phy_driver_unregister(&bcm50610_driver);
out_50610:
phy_driver_unregister(&bcm5482_driver);
@@ -605,7 +816,9 @@
static void __exit broadcom_exit(void)
{
+ phy_driver_unregister(&bcmac131_driver);
phy_driver_unregister(&bcm57780_driver);
+ phy_driver_unregister(&bcm50610m_driver);
phy_driver_unregister(&bcm50610_driver);
phy_driver_unregister(&bcm5482_driver);
phy_driver_unregister(&bcm5481_driver);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index dd6f54d..6f69b9b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -155,8 +155,27 @@
return err;
err = genphy_config_aneg(phydev);
+ if (err < 0)
+ return err;
- return err;
+ if (phydev->autoneg != AUTONEG_ENABLE) {
+ int bmcr;
+
+ /*
+ * A write to speed/duplex bits (that is performed by
+ * genphy_config_aneg() call above) must be followed by
+ * a software reset. Otherwise, the write has no effect.
+ */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
}
static int m88e1121_config_aneg(struct phy_device *phydev)
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 22cdd45..250e10f 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -211,7 +211,7 @@
new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
if (!new_bus)
- return -ENODEV;
+ goto out_free;
ret = of_mdiobus_register(new_bus, ofdev->node);
if (ret)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index eda94fc..6b71b00 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -324,9 +324,6 @@
break;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
if (mii_data->phy_id == phydev->addr) {
switch(mii_data->reg_num) {
case MII_BMCR:
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 2ca8b0d..00487f5 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -990,7 +990,7 @@
schedule_work(&nl->immediate);
spin_unlock_irq(&nl->lock);
- return 0;
+ return NETDEV_TX_OK;
}
static void
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index cd37d73..9bf2a6b 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -951,7 +951,7 @@
/*
* Network interface unit routines.
*/
-static int
+static netdev_tx_t
ppp_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ppp *ppp = netdev_priv(dev);
@@ -988,12 +988,12 @@
netif_stop_queue(dev);
skb_queue_tail(&ppp->file.xq, skb);
ppp_xmit_process(ppp);
- return 0;
+ return NETDEV_TX_OK;
outf:
kfree_skb(skb);
++dev->stats.tx_dropped;
- return 0;
+ return NETDEV_TX_OK;
}
static int
@@ -1431,6 +1431,7 @@
*otherwise divide it according to the speed
*of the channel we are going to transmit on
*/
+ flen = len;
if (nfree > 0) {
if (pch->speed == 0) {
flen = totlen/nfree ;
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 5f20902..7cbf6f9 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -1185,40 +1185,40 @@
{
int err;
- err = proto_register(&pppoe_sk_proto, 0);
+ err = register_pernet_gen_device(&pppoe_net_id, &pppoe_net_ops);
if (err)
goto out;
+ err = proto_register(&pppoe_sk_proto, 0);
+ if (err)
+ goto out_unregister_net_ops;
+
err = register_pppox_proto(PX_PROTO_OE, &pppoe_proto);
if (err)
goto out_unregister_pppoe_proto;
- err = register_pernet_gen_device(&pppoe_net_id, &pppoe_net_ops);
- if (err)
- goto out_unregister_pppox_proto;
-
dev_add_pack(&pppoes_ptype);
dev_add_pack(&pppoed_ptype);
register_netdevice_notifier(&pppoe_notifier);
return 0;
-out_unregister_pppox_proto:
- unregister_pppox_proto(PX_PROTO_OE);
out_unregister_pppoe_proto:
proto_unregister(&pppoe_sk_proto);
+out_unregister_net_ops:
+ unregister_pernet_gen_device(pppoe_net_id, &pppoe_net_ops);
out:
return err;
}
static void __exit pppoe_exit(void)
{
- unregister_pppox_proto(PX_PROTO_OE);
- dev_remove_pack(&pppoes_ptype);
- dev_remove_pack(&pppoed_ptype);
unregister_netdevice_notifier(&pppoe_notifier);
- unregister_pernet_gen_device(pppoe_net_id, &pppoe_net_ops);
+ dev_remove_pack(&pppoed_ptype);
+ dev_remove_pack(&pppoes_ptype);
+ unregister_pppox_proto(PX_PROTO_OE);
proto_unregister(&pppoe_sk_proto);
+ unregister_pernet_gen_device(pppoe_net_id, &pppoe_net_ops);
}
module_init(pppoe_init);
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index a3932c9..b211613 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1346,7 +1346,7 @@
return status;
}
-static struct ethtool_ops gelic_ether_ethtool_ops = {
+static const struct ethtool_ops gelic_ether_ethtool_ops = {
.get_drvinfo = gelic_net_get_drvinfo,
.get_settings = gelic_ether_get_settings,
.get_link = ethtool_op_get_link,
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 6932b08..227b141 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2714,7 +2714,7 @@
#endif
};
-static struct ethtool_ops gelic_wl_ethtool_ops = {
+static const struct ethtool_ops gelic_wl_ethtool_ops = {
.get_drvinfo = gelic_net_get_drvinfo,
.get_link = gelic_wl_get_link,
.get_tx_csum = ethtool_op_get_tx_csum,
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 3e4b67a..4c61051 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2572,7 +2572,8 @@
* The IOCB is always the top of the chain followed by one or more
* OALs (when necessary).
*/
-static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t ql3xxx_send(struct sk_buff *skb,
+ struct net_device *ndev)
{
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 6ed5317..a9845a2 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1287,12 +1287,11 @@
u32 sbq_free_cnt; /* free buffer desc cnt */
/* Misc. handler elements. */
- u32 type; /* Type of queue, tx, rx, or default. */
+ u32 type; /* Type of queue, tx, rx. */
u32 irq; /* Which vector this ring is assigned. */
u32 cpu; /* Which CPU this should run on. */
char name[IFNAMSIZ + 5];
struct napi_struct napi;
- struct delayed_work rx_work;
u8 reserved;
struct ql_adapter *qdev;
};
@@ -1366,6 +1365,7 @@
struct intr_context {
struct ql_adapter *qdev;
u32 intr;
+ u32 irq_mask; /* Mask of which rings the vector services. */
u32 hooked;
u32 intr_en_mask; /* value/mask used to enable this intr */
u32 intr_dis_mask; /* value/mask used to disable this intr */
@@ -1486,13 +1486,11 @@
struct intr_context intr_context[MAX_RX_RINGS];
int tx_ring_count; /* One per online CPU. */
- u32 rss_ring_first_cq_id;/* index of first inbound (rss) rx_ring */
- u32 rss_ring_count; /* One per online CPU. */
+ u32 rss_ring_count; /* One per irq vector. */
/*
* rx_ring_count =
- * one default queue +
* (CPU count * outbound completion rx_ring) +
- * (CPU count * inbound (RSS) completion rx_ring)
+ * (irq_vector_cnt * inbound (RSS) completion rx_ring)
*/
int rx_ring_count;
int ring_mem_size;
@@ -1519,7 +1517,6 @@
union flash_params flash;
struct net_device_stats stats;
- struct workqueue_struct *q_workqueue;
struct workqueue_struct *workqueue;
struct delayed_work asic_reset_work;
struct delayed_work mpi_reset_work;
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 40a70c3..aa88cb3 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -418,8 +418,6 @@
printk(KERN_ERR PFX "qdev->intr_count = %d.\n", qdev->intr_count);
printk(KERN_ERR PFX "qdev->tx_ring = %p.\n",
qdev->tx_ring);
- printk(KERN_ERR PFX "qdev->rss_ring_first_cq_id = %d.\n",
- qdev->rss_ring_first_cq_id);
printk(KERN_ERR PFX "qdev->rss_ring_count = %d.\n",
qdev->rss_ring_count);
printk(KERN_ERR PFX "qdev->rx_ring = %p.\n", qdev->rx_ring);
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index eb6a9ee..68f9bd2 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -49,10 +49,11 @@
/* Skip the default queue, and update the outbound handler
* queues if they changed.
*/
- cqicb = (struct cqicb *)&qdev->rx_ring[1];
+ cqicb = (struct cqicb *)&qdev->rx_ring[qdev->rss_ring_count];
if (le16_to_cpu(cqicb->irq_delay) != qdev->tx_coalesce_usecs ||
- le16_to_cpu(cqicb->pkt_delay) != qdev->tx_max_coalesced_frames) {
- for (i = 1; i < qdev->rss_ring_first_cq_id; i++, rx_ring++) {
+ le16_to_cpu(cqicb->pkt_delay) !=
+ qdev->tx_max_coalesced_frames) {
+ for (i = qdev->rss_ring_count; i < qdev->rx_ring_count; i++) {
rx_ring = &qdev->rx_ring[i];
cqicb = (struct cqicb *)rx_ring;
cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs);
@@ -70,12 +71,11 @@
}
/* Update the inbound (RSS) handler queues if they changed. */
- cqicb = (struct cqicb *)&qdev->rx_ring[qdev->rss_ring_first_cq_id];
+ cqicb = (struct cqicb *)&qdev->rx_ring[0];
if (le16_to_cpu(cqicb->irq_delay) != qdev->rx_coalesce_usecs ||
- le16_to_cpu(cqicb->pkt_delay) != qdev->rx_max_coalesced_frames) {
- for (i = qdev->rss_ring_first_cq_id;
- i <= qdev->rss_ring_first_cq_id + qdev->rss_ring_count;
- i++) {
+ le16_to_cpu(cqicb->pkt_delay) !=
+ qdev->rx_max_coalesced_frames) {
+ for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
rx_ring = &qdev->rx_ring[i];
cqicb = (struct cqicb *)rx_ring;
cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs);
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 5768af1..2205292 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -370,9 +370,7 @@
cam_output = (CAM_OUT_ROUTE_NIC |
(qdev->
func << CAM_OUT_FUNC_SHIFT) |
- (qdev->
- rss_ring_first_cq_id <<
- CAM_OUT_CQ_ID_SHIFT));
+ (0 << CAM_OUT_CQ_ID_SHIFT));
if (qdev->vlgrp)
cam_output |= CAM_OUT_RV;
/* route to NIC core */
@@ -1649,8 +1647,7 @@
qdev->stats.rx_packets++;
qdev->stats.rx_bytes += skb->len;
- skb_record_rx_queue(skb,
- rx_ring->cq_id - qdev->rss_ring_first_cq_id);
+ skb_record_rx_queue(skb, rx_ring->cq_id);
if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
if (qdev->vlgrp &&
(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) &&
@@ -1862,11 +1859,41 @@
{
struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi);
struct ql_adapter *qdev = rx_ring->qdev;
- int work_done = ql_clean_inbound_rx_ring(rx_ring, budget);
+ struct rx_ring *trx_ring;
+ int i, work_done = 0;
+ struct intr_context *ctx = &qdev->intr_context[rx_ring->cq_id];
QPRINTK(qdev, RX_STATUS, DEBUG, "Enter, NAPI POLL cq_id = %d.\n",
rx_ring->cq_id);
+ /* Service the TX rings first. They start
+ * right after the RSS rings. */
+ for (i = qdev->rss_ring_count; i < qdev->rx_ring_count; i++) {
+ trx_ring = &qdev->rx_ring[i];
+ /* If this TX completion ring belongs to this vector and
+ * it's not empty then service it.
+ */
+ if ((ctx->irq_mask & (1 << trx_ring->cq_id)) &&
+ (ql_read_sh_reg(trx_ring->prod_idx_sh_reg) !=
+ trx_ring->cnsmr_idx)) {
+ QPRINTK(qdev, INTR, DEBUG,
+ "%s: Servicing TX completion ring %d.\n",
+ __func__, trx_ring->cq_id);
+ ql_clean_outbound_rx_ring(trx_ring);
+ }
+ }
+
+ /*
+ * Now service the RSS ring if it's active.
+ */
+ if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
+ rx_ring->cnsmr_idx) {
+ QPRINTK(qdev, INTR, DEBUG,
+ "%s: Servicing RX completion ring %d.\n",
+ __func__, rx_ring->cq_id);
+ work_done = ql_clean_inbound_rx_ring(rx_ring, budget);
+ }
+
if (work_done < budget) {
napi_complete(napi);
ql_enable_completion_interrupt(qdev, rx_ring->irq);
@@ -1928,38 +1955,6 @@
}
-/* Worker thread to process a given rx_ring that is dedicated
- * to outbound completions.
- */
-static void ql_tx_clean(struct work_struct *work)
-{
- struct rx_ring *rx_ring =
- container_of(work, struct rx_ring, rx_work.work);
- ql_clean_outbound_rx_ring(rx_ring);
- ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq);
-
-}
-
-/* Worker thread to process a given rx_ring that is dedicated
- * to inbound completions.
- */
-static void ql_rx_clean(struct work_struct *work)
-{
- struct rx_ring *rx_ring =
- container_of(work, struct rx_ring, rx_work.work);
- ql_clean_inbound_rx_ring(rx_ring, 64);
- ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq);
-}
-
-/* MSI-X Multiple Vector Interrupt Handler for outbound completions. */
-static irqreturn_t qlge_msix_tx_isr(int irq, void *dev_id)
-{
- struct rx_ring *rx_ring = dev_id;
- queue_delayed_work_on(rx_ring->cpu, rx_ring->qdev->q_workqueue,
- &rx_ring->rx_work, 0);
- return IRQ_HANDLED;
-}
-
/* MSI-X Multiple Vector Interrupt Handler for inbound completions. */
static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id)
{
@@ -1979,7 +1974,6 @@
struct ql_adapter *qdev = rx_ring->qdev;
struct intr_context *intr_context = &qdev->intr_context[0];
u32 var;
- int i;
int work_done = 0;
spin_lock(&qdev->hw_lock);
@@ -2020,41 +2014,18 @@
}
/*
- * Check the default queue and wake handler if active.
+ * Get the bit-mask that shows the active queues for this
+ * pass. Compare it to the queues that this irq services
+ * and call napi if there's a match.
*/
- rx_ring = &qdev->rx_ring[0];
- if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) {
- QPRINTK(qdev, INTR, INFO, "Waking handler for rx_ring[0].\n");
- ql_disable_completion_interrupt(qdev, intr_context->intr);
- queue_delayed_work_on(smp_processor_id(), qdev->q_workqueue,
- &rx_ring->rx_work, 0);
- work_done++;
- }
-
- if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
- /*
- * Start the DPC for each active queue.
- */
- for (i = 1; i < qdev->rx_ring_count; i++) {
- rx_ring = &qdev->rx_ring[i];
- if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
- rx_ring->cnsmr_idx) {
+ var = ql_read32(qdev, ISR1);
+ if (var & intr_context->irq_mask) {
QPRINTK(qdev, INTR, INFO,
- "Waking handler for rx_ring[%d].\n", i);
- ql_disable_completion_interrupt(qdev,
- intr_context->
- intr);
- if (i < qdev->rss_ring_first_cq_id)
- queue_delayed_work_on(rx_ring->cpu,
- qdev->q_workqueue,
- &rx_ring->rx_work,
- 0);
- else
+ "Waking handler for rx_ring[0].\n");
+ ql_disable_completion_interrupt(qdev, intr_context->intr);
napi_schedule(&rx_ring->napi);
work_done++;
}
- }
- }
ql_enable_completion_interrupt(qdev, intr_context->intr);
return work_done ? IRQ_HANDLED : IRQ_NONE;
}
@@ -2132,7 +2103,7 @@
iph->daddr, len, iph->protocol, 0);
}
-static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
{
struct tx_ring_desc *tx_ring_desc;
struct ob_mac_iocb_req *mac_iocb_ptr;
@@ -2706,35 +2677,9 @@
}
switch (rx_ring->type) {
case TX_Q:
- /* If there's only one interrupt, then we use
- * worker threads to process the outbound
- * completion handling rx_rings. We do this so
- * they can be run on multiple CPUs. There is
- * room to play with this more where we would only
- * run in a worker if there are more than x number
- * of outbound completions on the queue and more
- * than one queue active. Some threshold that
- * would indicate a benefit in spite of the cost
- * of a context switch.
- * If there's more than one interrupt, then the
- * outbound completions are processed in the ISR.
- */
- if (!test_bit(QL_MSIX_ENABLED, &qdev->flags))
- INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean);
- else {
- /* With all debug warnings on we see a WARN_ON message
- * when we free the skb in the interrupt context.
- */
- INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean);
- }
cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs);
cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames);
break;
- case DEFAULT_Q:
- INIT_DELAYED_WORK(&rx_ring->rx_work, ql_rx_clean);
- cqicb->irq_delay = 0;
- cqicb->pkt_delay = 0;
- break;
case RX_Q:
/* Inbound completion handling rx_rings run in
* separate NAPI contexts.
@@ -2818,17 +2763,20 @@
}
}
+/* We start by trying to get the number of vectors
+ * stored in qdev->intr_count. If we don't get that
+ * many then we reduce the count and try again.
+ */
static void ql_enable_msix(struct ql_adapter *qdev)
{
- int i;
+ int i, err;
- qdev->intr_count = 1;
/* Get the MSIX vectors. */
if (irq_type == MSIX_IRQ) {
/* Try to alloc space for the msix struct,
* if it fails then go to MSI/legacy.
*/
- qdev->msi_x_entry = kcalloc(qdev->rx_ring_count,
+ qdev->msi_x_entry = kcalloc(qdev->intr_count,
sizeof(struct msix_entry),
GFP_KERNEL);
if (!qdev->msi_x_entry) {
@@ -2836,26 +2784,36 @@
goto msi;
}
- for (i = 0; i < qdev->rx_ring_count; i++)
+ for (i = 0; i < qdev->intr_count; i++)
qdev->msi_x_entry[i].entry = i;
- if (!pci_enable_msix
- (qdev->pdev, qdev->msi_x_entry, qdev->rx_ring_count)) {
- set_bit(QL_MSIX_ENABLED, &qdev->flags);
- qdev->intr_count = qdev->rx_ring_count;
- QPRINTK(qdev, IFUP, DEBUG,
- "MSI-X Enabled, got %d vectors.\n",
- qdev->intr_count);
- return;
- } else {
+ /* Loop to get our vectors. We start with
+ * what we want and settle for what we get.
+ */
+ do {
+ err = pci_enable_msix(qdev->pdev,
+ qdev->msi_x_entry, qdev->intr_count);
+ if (err > 0)
+ qdev->intr_count = err;
+ } while (err > 0);
+
+ if (err < 0) {
kfree(qdev->msi_x_entry);
qdev->msi_x_entry = NULL;
QPRINTK(qdev, IFUP, WARNING,
"MSI-X Enable failed, trying MSI.\n");
+ qdev->intr_count = 1;
irq_type = MSI_IRQ;
+ } else if (err == 0) {
+ set_bit(QL_MSIX_ENABLED, &qdev->flags);
+ QPRINTK(qdev, IFUP, INFO,
+ "MSI-X Enabled, got %d vectors.\n",
+ qdev->intr_count);
+ return;
}
}
msi:
+ qdev->intr_count = 1;
if (irq_type == MSI_IRQ) {
if (!pci_enable_msi(qdev->pdev)) {
set_bit(QL_MSI_ENABLED, &qdev->flags);
@@ -2868,6 +2826,71 @@
QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n");
}
+/* Each vector services 1 RSS ring and and 1 or more
+ * TX completion rings. This function loops through
+ * the TX completion rings and assigns the vector that
+ * will service it. An example would be if there are
+ * 2 vectors (so 2 RSS rings) and 8 TX completion rings.
+ * This would mean that vector 0 would service RSS ring 0
+ * and TX competion rings 0,1,2 and 3. Vector 1 would
+ * service RSS ring 1 and TX completion rings 4,5,6 and 7.
+ */
+static void ql_set_tx_vect(struct ql_adapter *qdev)
+{
+ int i, j, vect;
+ u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count;
+
+ if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
+ /* Assign irq vectors to TX rx_rings.*/
+ for (vect = 0, j = 0, i = qdev->rss_ring_count;
+ i < qdev->rx_ring_count; i++) {
+ if (j == tx_rings_per_vector) {
+ vect++;
+ j = 0;
+ }
+ qdev->rx_ring[i].irq = vect;
+ j++;
+ }
+ } else {
+ /* For single vector all rings have an irq
+ * of zero.
+ */
+ for (i = 0; i < qdev->rx_ring_count; i++)
+ qdev->rx_ring[i].irq = 0;
+ }
+}
+
+/* Set the interrupt mask for this vector. Each vector
+ * will service 1 RSS ring and 1 or more TX completion
+ * rings. This function sets up a bit mask per vector
+ * that indicates which rings it services.
+ */
+static void ql_set_irq_mask(struct ql_adapter *qdev, struct intr_context *ctx)
+{
+ int j, vect = ctx->intr;
+ u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count;
+
+ if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
+ /* Add the RSS ring serviced by this vector
+ * to the mask.
+ */
+ ctx->irq_mask = (1 << qdev->rx_ring[vect].cq_id);
+ /* Add the TX ring(s) serviced by this vector
+ * to the mask. */
+ for (j = 0; j < tx_rings_per_vector; j++) {
+ ctx->irq_mask |=
+ (1 << qdev->rx_ring[qdev->rss_ring_count +
+ (vect * tx_rings_per_vector) + j].cq_id);
+ }
+ } else {
+ /* For single vector we just shift each queue's
+ * ID into the mask.
+ */
+ for (j = 0; j < qdev->rx_ring_count; j++)
+ ctx->irq_mask |= (1 << qdev->rx_ring[j].cq_id);
+ }
+}
+
/*
* Here we build the intr_context structures based on
* our rx_ring count and intr vector count.
@@ -2879,18 +2902,19 @@
int i = 0;
struct intr_context *intr_context = &qdev->intr_context[0];
- ql_enable_msix(qdev);
-
if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
/* Each rx_ring has it's
* own intr_context since we have separate
* vectors for each queue.
- * This only true when MSI-X is enabled.
*/
for (i = 0; i < qdev->intr_count; i++, intr_context++) {
qdev->rx_ring[i].irq = i;
intr_context->intr = i;
intr_context->qdev = qdev;
+ /* Set up this vector's bit-mask that indicates
+ * which queues it services.
+ */
+ ql_set_irq_mask(qdev, intr_context);
/*
* We set up each vectors enable/disable/read bits so
* there's no bit/mask calculations in the critical path.
@@ -2907,21 +2931,14 @@
INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD |
i;
-
if (i == 0) {
- /*
- * Default queue handles bcast/mcast plus
- * async events. Needs buffers.
+ /* The first vector/queue handles
+ * broadcast/multicast, fatal errors,
+ * and firmware events. This in addition
+ * to normal inbound NAPI processing.
*/
intr_context->handler = qlge_isr;
- sprintf(intr_context->name, "%s-default-queue",
- qdev->ndev->name);
- } else if (i < qdev->rss_ring_first_cq_id) {
- /*
- * Outbound queue is for outbound completions only.
- */
- intr_context->handler = qlge_msix_tx_isr;
- sprintf(intr_context->name, "%s-tx-%d",
+ sprintf(intr_context->name, "%s-rx-%d",
qdev->ndev->name, i);
} else {
/*
@@ -2955,9 +2972,17 @@
*/
intr_context->handler = qlge_isr;
sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name);
- for (i = 0; i < qdev->rx_ring_count; i++)
- qdev->rx_ring[i].irq = 0;
+ /* Set up this vector's bit-mask that indicates
+ * which queues it services. In this case there is
+ * a single vector so it will service all RSS and
+ * TX completion rings.
+ */
+ ql_set_irq_mask(qdev, intr_context);
}
+ /* Tell the TX completion rings which MSIx vector
+ * they will be using.
+ */
+ ql_set_tx_vect(qdev);
}
static void ql_free_irq(struct ql_adapter *qdev)
@@ -3062,7 +3087,7 @@
memset((void *)ricb, 0, sizeof(*ricb));
- ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
+ ricb->base_cq = RSS_L4K;
ricb->flags =
(RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 |
RSS_RT6);
@@ -3264,7 +3289,7 @@
}
/* Start NAPI for the RSS queues. */
- for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) {
+ for (i = 0; i < qdev->rss_ring_count; i++) {
QPRINTK(qdev, IFUP, DEBUG, "Enabling NAPI for rx_ring[%d].\n",
i);
napi_enable(&qdev->rx_ring[i].napi);
@@ -3326,7 +3351,6 @@
static int ql_adapter_down(struct ql_adapter *qdev)
{
int i, status = 0;
- struct rx_ring *rx_ring;
ql_link_off(qdev);
@@ -3340,27 +3364,8 @@
cancel_delayed_work_sync(&qdev->mpi_idc_work);
cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
- /* The default queue at index 0 is always processed in
- * a workqueue.
- */
- cancel_delayed_work_sync(&qdev->rx_ring[0].rx_work);
-
- /* The rest of the rx_rings are processed in
- * a workqueue only if it's a single interrupt
- * environment (MSI/Legacy).
- */
- for (i = 1; i < qdev->rx_ring_count; i++) {
- rx_ring = &qdev->rx_ring[i];
- /* Only the RSS rings use NAPI on multi irq
- * environment. Outbound completion processing
- * is done in interrupt context.
- */
- if (i >= qdev->rss_ring_first_cq_id) {
- napi_disable(&rx_ring->napi);
- } else {
- cancel_delayed_work_sync(&rx_ring->rx_work);
- }
- }
+ for (i = 0; i < qdev->rss_ring_count; i++)
+ napi_disable(&qdev->rx_ring[i].napi);
clear_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3370,7 +3375,7 @@
/* Call netif_napi_del() from common point.
*/
- for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
+ for (i = 0; i < qdev->rss_ring_count; i++)
netif_napi_del(&qdev->rx_ring[i].napi);
ql_free_rx_buffers(qdev);
@@ -3449,43 +3454,21 @@
int i;
struct rx_ring *rx_ring;
struct tx_ring *tx_ring;
- int cpu_cnt = num_online_cpus();
+ int cpu_cnt = min(MAX_CPUS, (int)num_online_cpus());
- /*
- * For each processor present we allocate one
- * rx_ring for outbound completions, and one
- * rx_ring for inbound completions. Plus there is
- * always the one default queue. For the CPU
- * counts we end up with the following rx_rings:
- * rx_ring count =
- * one default queue +
- * (CPU count * outbound completion rx_ring) +
- * (CPU count * inbound (RSS) completion rx_ring)
- * To keep it simple we limit the total number of
- * queues to < 32, so we truncate CPU to 8.
- * This limitation can be removed when requested.
+ /* In a perfect world we have one RSS ring for each CPU
+ * and each has it's own vector. To do that we ask for
+ * cpu_cnt vectors. ql_enable_msix() will adjust the
+ * vector count to what we actually get. We then
+ * allocate an RSS ring for each.
+ * Essentially, we are doing min(cpu_count, msix_vector_count).
*/
-
- if (cpu_cnt > MAX_CPUS)
- cpu_cnt = MAX_CPUS;
-
- /*
- * rx_ring[0] is always the default queue.
- */
- /* Allocate outbound completion ring for each CPU. */
+ qdev->intr_count = cpu_cnt;
+ ql_enable_msix(qdev);
+ /* Adjust the RSS ring count to the actual vector count. */
+ qdev->rss_ring_count = qdev->intr_count;
qdev->tx_ring_count = cpu_cnt;
- /* Allocate inbound completion (RSS) ring for each CPU. */
- qdev->rss_ring_count = cpu_cnt;
- /* cq_id for the first inbound ring handler. */
- qdev->rss_ring_first_cq_id = cpu_cnt + 1;
- /*
- * qdev->rx_ring_count:
- * Total number of rx_rings. This includes the one
- * default queue, a number of outbound completion
- * handler rx_rings, and the number of inbound
- * completion handler rx_rings.
- */
- qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
+ qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count;
for (i = 0; i < qdev->tx_ring_count; i++) {
tx_ring = &qdev->tx_ring[i];
@@ -3498,9 +3481,9 @@
/*
* The completion queue ID for the tx rings start
- * immediately after the default Q ID, which is zero.
+ * immediately after the rss rings.
*/
- tx_ring->cq_id = i + 1;
+ tx_ring->cq_id = qdev->rss_ring_count + i;
}
for (i = 0; i < qdev->rx_ring_count; i++) {
@@ -3509,10 +3492,9 @@
rx_ring->qdev = qdev;
rx_ring->cq_id = i;
rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */
- if (i == 0) { /* Default queue at index 0. */
+ if (i < qdev->rss_ring_count) {
/*
- * Default queue handles bcast/mcast plus
- * async events. Needs buffers.
+ * Inbound (RSS) queues.
*/
rx_ring->cq_len = qdev->rx_ring_size;
rx_ring->cq_size =
@@ -3525,8 +3507,8 @@
rx_ring->sbq_size =
rx_ring->sbq_len * sizeof(__le64);
rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2;
- rx_ring->type = DEFAULT_Q;
- } else if (i < qdev->rss_ring_first_cq_id) {
+ rx_ring->type = RX_Q;
+ } else {
/*
* Outbound queue handles outbound completions only.
*/
@@ -3541,22 +3523,6 @@
rx_ring->sbq_size = 0;
rx_ring->sbq_buf_size = 0;
rx_ring->type = TX_Q;
- } else { /* Inbound completions (RSS) queues */
- /*
- * Inbound queues handle unicast frames only.
- */
- rx_ring->cq_len = qdev->rx_ring_size;
- rx_ring->cq_size =
- rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb);
- rx_ring->lbq_len = NUM_LARGE_BUFFERS;
- rx_ring->lbq_size =
- rx_ring->lbq_len * sizeof(__le64);
- rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE;
- rx_ring->sbq_len = NUM_SMALL_BUFFERS;
- rx_ring->sbq_size =
- rx_ring->sbq_len * sizeof(__le64);
- rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2;
- rx_ring->type = RX_Q;
}
}
return 0;
@@ -3845,10 +3811,7 @@
destroy_workqueue(qdev->workqueue);
qdev->workqueue = NULL;
}
- if (qdev->q_workqueue) {
- destroy_workqueue(qdev->q_workqueue);
- qdev->q_workqueue = NULL;
- }
+
if (qdev->reg_base)
iounmap(qdev->reg_base);
if (qdev->doorbell_area)
@@ -3961,8 +3924,6 @@
* Set up the operating parameters.
*/
qdev->rx_csum = 1;
-
- qdev->q_workqueue = create_workqueue(ndev->name);
qdev->workqueue = create_singlethread_workqueue(ndev->name);
INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
@@ -4076,6 +4037,11 @@
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ netif_device_detach(ndev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(ndev))
ql_adapter_down(qdev);
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 961b539..7dfcb58 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
#include <asm/processor.h>
#define DRV_NAME "r6040"
-#define DRV_VERSION "0.24"
-#define DRV_RELDATE "08Jul2009"
+#define DRV_VERSION "0.25"
+#define DRV_RELDATE "20Aug2009"
/* PHY CHIP Address */
#define PHY1_ADDR 1 /* For MAC1 */
@@ -750,14 +750,6 @@
struct r6040_private *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
int ret;
- u16 val;
-
- /* Check presence of a second PHY */
- val = r6040_phy_read(ioaddr, lp->phy_addr, 2);
- if (val == 0xFFFF) {
- printk(KERN_ERR DRV_NAME " no second PHY attached\n");
- return -EIO;
- }
/* Initialise and alloc RX/TX buffers */
r6040_init_txbufs(dev);
@@ -891,13 +883,13 @@
return 0;
}
-static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t r6040_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct r6040_private *lp = netdev_priv(dev);
struct r6040_descriptor *descptr;
void __iomem *ioaddr = lp->base;
unsigned long flags;
- int ret = NETDEV_TX_OK;
/* Critical Section */
spin_lock_irqsave(&lp->lock, flags);
@@ -907,8 +899,7 @@
spin_unlock_irqrestore(&lp->lock, flags);
netif_stop_queue(dev);
printk(KERN_ERR DRV_NAME ": no tx descriptor\n");
- ret = NETDEV_TX_BUSY;
- return ret;
+ return NETDEV_TX_BUSY;
}
/* Statistic Counter */
@@ -936,7 +927,8 @@
dev->trans_start = jiffies;
spin_unlock_irqrestore(&lp->lock, flags);
- return ret;
+
+ return NETDEV_TX_OK;
}
static void r6040_multicast_list(struct net_device *dev)
@@ -1091,7 +1083,6 @@
int err, io_size = R6040_IO_SIZE;
static int card_idx = -1;
int bar = 0;
- long pioaddr;
u16 *adrp;
printk(KERN_INFO "%s\n", version);
@@ -1115,13 +1106,12 @@
}
/* IO Size check */
- if (pci_resource_len(pdev, 0) < io_size) {
+ if (pci_resource_len(pdev, bar) < io_size) {
printk(KERN_ERR DRV_NAME ": Insufficient PCI resources, aborting\n");
err = -EIO;
goto err_out;
}
- pioaddr = pci_resource_start(pdev, 0); /* IO map base address */
pci_set_master(pdev);
dev = alloc_etherdev(sizeof(struct r6040_private));
@@ -1196,6 +1186,13 @@
lp->mii_if.phy_id_mask = 0x1f;
lp->mii_if.reg_num_mask = 0x1f;
+ /* Check the vendor ID on the PHY, if 0xffff assume none attached */
+ if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) {
+ printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n");
+ err = -ENODEV;
+ goto err_out_unmap;
+ }
+
/* Register net device. After this dev->name assign */
err = register_netdev(dev);
if (err) {
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b82780d..50c6a3c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -507,7 +507,8 @@
MODULE_VERSION(RTL8169_VERSION);
static int rtl8169_open(struct net_device *dev);
-static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance);
static int rtl8169_init_ring(struct net_device *dev);
static void rtl_hw_start(struct net_device *dev);
@@ -1222,17 +1223,6 @@
.get_ethtool_stats = rtl8169_get_ethtool_stats,
};
-static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg,
- int bitnum, int bitval)
-{
- int val;
-
- val = mdio_read(ioaddr, reg);
- val = (bitval == 1) ?
- val | (bitval << bitnum) : val & ~(0x0001 << bitnum);
- mdio_write(ioaddr, reg, val & 0xffff);
-}
-
static void rtl8169_get_mac_version(struct rtl8169_private *tp,
void __iomem *ioaddr)
{
@@ -1328,54 +1318,69 @@
static void rtl8169s_hw_phy_config(void __iomem *ioaddr)
{
- struct {
- u16 regs[5]; /* Beware of bit-sign propagation */
- } phy_magic[5] = { {
- { 0x0000, //w 4 15 12 0
- 0x00a1, //w 3 15 0 00a1
- 0x0008, //w 2 15 0 0008
- 0x1020, //w 1 15 0 1020
- 0x1000 } },{ //w 0 15 0 1000
- { 0x7000, //w 4 15 12 7
- 0xff41, //w 3 15 0 ff41
- 0xde60, //w 2 15 0 de60
- 0x0140, //w 1 15 0 0140
- 0x0077 } },{ //w 0 15 0 0077
- { 0xa000, //w 4 15 12 a
- 0xdf01, //w 3 15 0 df01
- 0xdf20, //w 2 15 0 df20
- 0xff95, //w 1 15 0 ff95
- 0xfa00 } },{ //w 0 15 0 fa00
- { 0xb000, //w 4 15 12 b
- 0xff41, //w 3 15 0 ff41
- 0xde20, //w 2 15 0 de20
- 0x0140, //w 1 15 0 0140
- 0x00bb } },{ //w 0 15 0 00bb
- { 0xf000, //w 4 15 12 f
- 0xdf01, //w 3 15 0 df01
- 0xdf20, //w 2 15 0 df20
- 0xff95, //w 1 15 0 ff95
- 0xbf00 } //w 0 15 0 bf00
- }
- }, *p = phy_magic;
- unsigned int i;
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x006e },
+ { 0x08, 0x0708 },
+ { 0x15, 0x4000 },
+ { 0x18, 0x65c7 },
- mdio_write(ioaddr, 0x1f, 0x0001); //w 31 2 0 1
- mdio_write(ioaddr, 0x15, 0x1000); //w 21 15 0 1000
- mdio_write(ioaddr, 0x18, 0x65c7); //w 24 15 0 65c7
- rtl8169_write_gmii_reg_bit(ioaddr, 4, 11, 0); //w 4 11 11 0
+ { 0x1f, 0x0001 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x0000 },
- for (i = 0; i < ARRAY_SIZE(phy_magic); i++, p++) {
- int val, pos = 4;
+ { 0x03, 0xff41 },
+ { 0x02, 0xdf60 },
+ { 0x01, 0x0140 },
+ { 0x00, 0x0077 },
+ { 0x04, 0x7800 },
+ { 0x04, 0x7000 },
- val = (mdio_read(ioaddr, pos) & 0x0fff) | (p->regs[0] & 0xffff);
- mdio_write(ioaddr, pos, val);
- while (--pos >= 0)
- mdio_write(ioaddr, pos, p->regs[4 - pos] & 0xffff);
- rtl8169_write_gmii_reg_bit(ioaddr, 4, 11, 1); //w 4 11 11 1
- rtl8169_write_gmii_reg_bit(ioaddr, 4, 11, 0); //w 4 11 11 0
- }
- mdio_write(ioaddr, 0x1f, 0x0000); //w 31 2 0 0
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf0f9 },
+ { 0x04, 0x9800 },
+ { 0x04, 0x9000 },
+
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xa000 },
+
+ { 0x03, 0xff41 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x0140 },
+ { 0x00, 0x00bb },
+ { 0x04, 0xb800 },
+ { 0x04, 0xb000 },
+
+ { 0x03, 0xdf41 },
+ { 0x02, 0xdc60 },
+ { 0x01, 0x6340 },
+ { 0x00, 0x007d },
+ { 0x04, 0xd800 },
+ { 0x04, 0xd000 },
+
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x100a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0xf000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0b, 0x0000 },
+ { 0x00, 0x9200 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
@@ -1389,6 +1394,124 @@
rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
+static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 vendor_id, device_id;
+
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &vendor_id);
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &device_id);
+
+ if ((vendor_id != PCI_VENDOR_ID_GIGABYTE) || (device_id != 0xe000))
+ return;
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_write(ioaddr, 0x10, 0xf01b);
+ mdio_write(ioaddr, 0x1f, 0x0000);
+}
+
+static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x04, 0x0000 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x9000 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0xa000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0x0000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x10, 0xf41b },
+ { 0x14, 0xfb54 },
+ { 0x18, 0xf5c7 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ rtl8169scd_hw_phy_config_quirk(tp, ioaddr);
+}
+
+static void rtl8169sce_hw_phy_config(void __iomem *ioaddr)
+{
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0001 },
+ { 0x04, 0x0000 },
+ { 0x03, 0x00a1 },
+ { 0x02, 0x0008 },
+ { 0x01, 0x0120 },
+ { 0x00, 0x1000 },
+ { 0x04, 0x0800 },
+ { 0x04, 0x9000 },
+ { 0x03, 0x802f },
+ { 0x02, 0x4f02 },
+ { 0x01, 0x0409 },
+ { 0x00, 0xf099 },
+ { 0x04, 0x9800 },
+ { 0x04, 0xa000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0xff95 },
+ { 0x00, 0xba00 },
+ { 0x04, 0xa800 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0x0000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x0b, 0x8480 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x18, 0x67c7 },
+ { 0x04, 0x2000 },
+ { 0x03, 0x002f },
+ { 0x02, 0x4360 },
+ { 0x01, 0x0109 },
+ { 0x00, 0x3022 },
+ { 0x04, 0x2800 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+}
+
static void rtl8168bb_hw_phy_config(void __iomem *ioaddr)
{
struct phy_reg phy_reg_init[] = {
@@ -1607,6 +1730,7 @@
mdio_write(ioaddr, 0x1f, 0x0000);
mdio_patch(ioaddr, 0x11, 1 << 12);
mdio_patch(ioaddr, 0x19, 1 << 13);
+ mdio_patch(ioaddr, 0x10, 1 << 15);
rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
@@ -1628,6 +1752,12 @@
case RTL_GIGA_MAC_VER_04:
rtl8169sb_hw_phy_config(ioaddr);
break;
+ case RTL_GIGA_MAC_VER_05:
+ rtl8169scd_hw_phy_config(tp, ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_06:
+ rtl8169sce_hw_phy_config(ioaddr);
+ break;
case RTL_GIGA_MAC_VER_07:
case RTL_GIGA_MAC_VER_08:
case RTL_GIGA_MAC_VER_09:
@@ -1861,8 +1991,6 @@
return 0;
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
mdio_write(tp->mmio_addr, data->reg_num & 0x1f, data->val_in);
return 0;
}
@@ -2180,7 +2308,7 @@
pci_set_drvdata(pdev, dev);
if (netif_msg_probe(tp)) {
- u32 xid = RTL_R32(TxConfig) & 0x7cf0f8ff;
+ u32 xid = RTL_R32(TxConfig) & 0x9cf0f8ff;
printk(KERN_INFO "%s: %s at 0x%lx, "
"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
@@ -2757,7 +2885,7 @@
EnableBist | \
Mac_dbgo_oe | \
Force_half_dup | \
- Force_half_dup | \
+ Force_rxflow_en | \
Force_txflow_en | \
Cxpl_dbg_sel | \
ASF | \
@@ -3228,7 +3356,8 @@
return 0;
}
-static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
unsigned int frags, entry = tp->cur_tx % NUM_TX_DESC;
@@ -3237,7 +3366,6 @@
dma_addr_t mapping;
u32 status, len;
u32 opts1;
- int ret = NETDEV_TX_OK;
if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
if (netif_msg_drv(tp)) {
@@ -3288,14 +3416,12 @@
netif_wake_queue(dev);
}
-out:
- return ret;
+ return NETDEV_TX_OK;
err_stop:
netif_stop_queue(dev);
- ret = NETDEV_TX_BUSY;
dev->stats.tx_dropped++;
- goto out;
+ return NETDEV_TX_BUSY;
}
static void rtl8169_pcierr_interrupt(struct net_device *dev)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 8702e7a..bc98e7f 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -114,11 +114,6 @@
if (error == NET_RX_DROP) {
ndev->stats.rx_dropped++;
- } else if (error == NET_RX_BAD) {
- if (netif_msg_rx_err(rnet))
- printk(KERN_WARNING "%s: bad rx packet\n",
- DRV_NAME);
- ndev->stats.rx_errors++;
} else {
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += RIO_MAX_MSG_SIZE;
@@ -208,7 +203,7 @@
spin_unlock_irqrestore(&rnet->tx_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u16 tid,
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 81dbcbb..20a7174 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1401,7 +1401,8 @@
}
-static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t rr_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct rr_private *rrpriv = netdev_priv(dev);
struct rr_regs __iomem *regs = rrpriv->regs;
@@ -1466,7 +1467,7 @@
spin_unlock_irqrestore(&rrpriv->lock, flags);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/rrunner.h b/drivers/net/rrunner.h
index 6173f11..2816904 100644
--- a/drivers/net/rrunner.h
+++ b/drivers/net/rrunner.h
@@ -831,7 +831,8 @@
static irqreturn_t rr_interrupt(int irq, void *dev_id);
static int rr_open(struct net_device *dev);
-static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t rr_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int rr_close(struct net_device *dev);
static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static unsigned int rr_read_eeprom(struct rr_private *rrpriv,
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 458daa0..ddccf5f 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -1,7 +1,7 @@
/************************************************************************
* s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
* Copyright(c) 2002-2007 Neterion Inc.
-
+ *
* This software may be used and distributed according to the terms of
* the GNU General Public License (GPL), incorporated herein by reference.
* Drivers based on or derived from this code fall under the GPL and must
@@ -25,7 +25,7 @@
* Christopher Hellwig : Some more 2.6 specific issues in the driver.
*
* The module loadable parameters that are supported by the driver and a brief
- * explaination of all the variables.
+ * explanation of all the variables.
*
* rx_ring_num : This can be used to program the number of receive rings used
* in the driver.
@@ -54,6 +54,8 @@
* Possible values '1' for enable and '0' for disable. Default is '0'
************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -75,11 +77,11 @@
#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <linux/tcp.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
#include <net/tcp.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
#include <asm/div64.h>
#include <asm/irq.h>
@@ -93,15 +95,15 @@
static char s2io_driver_name[] = "Neterion";
static char s2io_driver_version[] = DRV_VERSION;
-static int rxd_size[2] = {32,48};
-static int rxd_count[2] = {127,85};
+static int rxd_size[2] = {32, 48};
+static int rxd_count[2] = {127, 85};
static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
{
int ret;
ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
+ (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
return ret;
}
@@ -111,21 +113,21 @@
* problem, 600B, 600C, 600D, 640B, 640C and 640D.
* macro below identifies these cards given the subsystem_id.
*/
-#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
- (dev_type == XFRAME_I_DEVICE) ? \
- ((((subid >= 0x600B) && (subid <= 0x600D)) || \
- ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
+#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
+ (dev_type == XFRAME_I_DEVICE) ? \
+ ((((subid >= 0x600B) && (subid <= 0x600D)) || \
+ ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
-static inline int is_s2io_card_up(const struct s2io_nic * sp)
+static inline int is_s2io_card_up(const struct s2io_nic *sp)
{
return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
}
/* Ethtool related variables and Macros. */
-static char s2io_gstrings[][ETH_GSTRING_LEN] = {
+static const char s2io_gstrings[][ETH_GSTRING_LEN] = {
"Register test\t(offline)",
"Eeprom test\t(offline)",
"Link test\t(online)",
@@ -133,7 +135,7 @@
"BIST Test\t(offline)"
};
-static char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
+static const char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
{"tmac_frms"},
{"tmac_data_octets"},
{"tmac_drop_frms"},
@@ -230,7 +232,7 @@
{"rxf_wr_cnt"}
};
-static char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
+static const char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
{"rmac_ttl_1519_4095_frms"},
{"rmac_ttl_4096_8191_frms"},
{"rmac_ttl_8192_max_frms"},
@@ -249,7 +251,7 @@
{"link_fault_cnt"}
};
-static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
+static const char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
{"\n DRIVER STATISTICS"},
{"single_bit_ecc_errs"},
{"double_bit_ecc_errs"},
@@ -328,20 +330,20 @@
#define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys)
#define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys)
-#define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN )
-#define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN )
+#define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN)
+#define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN)
-#define XFRAME_I_STAT_STRINGS_LEN ( XFRAME_I_STAT_LEN * ETH_GSTRING_LEN )
-#define XFRAME_II_STAT_STRINGS_LEN ( XFRAME_II_STAT_LEN * ETH_GSTRING_LEN )
+#define XFRAME_I_STAT_STRINGS_LEN (XFRAME_I_STAT_LEN * ETH_GSTRING_LEN)
+#define XFRAME_II_STAT_STRINGS_LEN (XFRAME_II_STAT_LEN * ETH_GSTRING_LEN)
#define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings)
-#define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
+#define S2IO_STRINGS_LEN (S2IO_TEST_LEN * ETH_GSTRING_LEN)
-#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
- init_timer(&timer); \
- timer.function = handle; \
- timer.data = (unsigned long) arg; \
- mod_timer(&timer, (jiffies + exp)) \
+#define S2IO_TIMER_CONF(timer, handle, arg, exp) \
+ init_timer(&timer); \
+ timer.function = handle; \
+ timer.data = (unsigned long)arg; \
+ mod_timer(&timer, (jiffies + exp)) \
/* copy mac addr to def_mac_addr array */
static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
@@ -361,16 +363,22 @@
int i;
struct s2io_nic *nic = netdev_priv(dev);
unsigned long flags[MAX_TX_FIFOS];
- struct mac_info *mac_control = &nic->mac_control;
struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
- for (i = 0; i < config->tx_fifo_num; i++)
- spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
+ for (i = 0; i < config->tx_fifo_num; i++) {
+ struct fifo_info *fifo = &mac_control->fifos[i];
+
+ spin_lock_irqsave(&fifo->tx_lock, flags[i]);
+ }
nic->vlgrp = grp;
- for (i = config->tx_fifo_num - 1; i >= 0; i--)
- spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
- flags[i]);
+
+ for (i = config->tx_fifo_num - 1; i >= 0; i--) {
+ struct fifo_info *fifo = &mac_control->fifos[i];
+
+ spin_unlock_irqrestore(&fifo->tx_lock, flags[i]);
+ }
}
/* Unregister the vlan */
@@ -379,18 +387,23 @@
int i;
struct s2io_nic *nic = netdev_priv(dev);
unsigned long flags[MAX_TX_FIFOS];
- struct mac_info *mac_control = &nic->mac_control;
struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
- for (i = 0; i < config->tx_fifo_num; i++)
- spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
+ for (i = 0; i < config->tx_fifo_num; i++) {
+ struct fifo_info *fifo = &mac_control->fifos[i];
+
+ spin_lock_irqsave(&fifo->tx_lock, flags[i]);
+ }
if (nic->vlgrp)
vlan_group_set_device(nic->vlgrp, vid, NULL);
- for (i = config->tx_fifo_num - 1; i >= 0; i--)
- spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
- flags[i]);
+ for (i = config->tx_fifo_num - 1; i >= 0; i--) {
+ struct fifo_info *fifo = &mac_control->fifos[i];
+
+ spin_unlock_irqrestore(&fifo->tx_lock, flags[i]);
+ }
}
/*
@@ -496,11 +509,11 @@
S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
- {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
+{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
static unsigned int rx_ring_sz[MAX_RX_RINGS] =
- {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
+{[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
static unsigned int rts_frm_len[MAX_RX_RINGS] =
- {[0 ...(MAX_RX_RINGS - 1)] = 0 };
+{[0 ...(MAX_RX_RINGS - 1)] = 0 };
module_param_array(tx_fifo_len, uint, NULL, 0);
module_param_array(rx_ring_sz, uint, NULL, 0);
@@ -516,9 +529,9 @@
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
- PCI_ANY_ID, PCI_ANY_ID},
- {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
- PCI_ANY_ID, PCI_ANY_ID},
+ PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
+ PCI_ANY_ID, PCI_ANY_ID},
{0,}
};
@@ -531,11 +544,11 @@
};
static struct pci_driver s2io_driver = {
- .name = "S2IO",
- .id_table = s2io_tbl,
- .probe = s2io_init_nic,
- .remove = __devexit_p(s2io_rem_nic),
- .err_handler = &s2io_err_handler,
+ .name = "S2IO",
+ .id_table = s2io_tbl,
+ .probe = s2io_init_nic,
+ .remove = __devexit_p(s2io_rem_nic),
+ .err_handler = &s2io_err_handler,
};
/* A simplifier macro used both by init and free shared_mem Fns(). */
@@ -627,37 +640,36 @@
struct net_device *dev = nic->dev;
unsigned long tmp;
struct buffAdd *ba;
-
- struct mac_info *mac_control;
- struct config_param *config;
+ struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
unsigned long long mem_allocated = 0;
- mac_control = &nic->mac_control;
- config = &nic->config;
-
-
- /* Allocation and initialization of TXDLs in FIOFs */
+ /* Allocation and initialization of TXDLs in FIFOs */
size = 0;
for (i = 0; i < config->tx_fifo_num; i++) {
- size += config->tx_cfg[i].fifo_len;
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ size += tx_cfg->fifo_len;
}
if (size > MAX_AVAILABLE_TXDS) {
- DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
- DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
+ DBG_PRINT(ERR_DBG,
+ "Too many TxDs requested: %d, max supported: %d\n",
+ size, MAX_AVAILABLE_TXDS);
return -EINVAL;
}
size = 0;
for (i = 0; i < config->tx_fifo_num; i++) {
- size = config->tx_cfg[i].fifo_len;
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ size = tx_cfg->fifo_len;
/*
* Legal values are from 2 to 8192
*/
if (size < 2) {
- DBG_PRINT(ERR_DBG, "s2io: Invalid fifo len (%d)", size);
- DBG_PRINT(ERR_DBG, "for fifo %d\n", i);
- DBG_PRINT(ERR_DBG, "s2io: Legal values for fifo len"
- "are 2 to 8192\n");
+ DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "
+ "Valid lengths are 2 through 8192\n",
+ i, size);
return -EINVAL;
}
}
@@ -666,13 +678,14 @@
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
- int fifo_len = config->tx_cfg[i].fifo_len;
+ struct fifo_info *fifo = &mac_control->fifos[i];
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+ int fifo_len = tx_cfg->fifo_len;
int list_holder_size = fifo_len * sizeof(struct list_info_hold);
- mac_control->fifos[i].list_info = kzalloc(list_holder_size,
- GFP_KERNEL);
- if (!mac_control->fifos[i].list_info) {
- DBG_PRINT(INFO_DBG,
- "Malloc failed for list_info\n");
+
+ fifo->list_info = kzalloc(list_holder_size, GFP_KERNEL);
+ if (!fifo->list_info) {
+ DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n");
return -ENOMEM;
}
mem_allocated += list_holder_size;
@@ -680,16 +693,17 @@
for (i = 0; i < config->tx_fifo_num; i++) {
int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
lst_per_page);
- mac_control->fifos[i].tx_curr_put_info.offset = 0;
- mac_control->fifos[i].tx_curr_put_info.fifo_len =
- config->tx_cfg[i].fifo_len - 1;
- mac_control->fifos[i].tx_curr_get_info.offset = 0;
- mac_control->fifos[i].tx_curr_get_info.fifo_len =
- config->tx_cfg[i].fifo_len - 1;
- mac_control->fifos[i].fifo_no = i;
- mac_control->fifos[i].nic = nic;
- mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
- mac_control->fifos[i].dev = dev;
+ struct fifo_info *fifo = &mac_control->fifos[i];
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ fifo->tx_curr_put_info.offset = 0;
+ fifo->tx_curr_put_info.fifo_len = tx_cfg->fifo_len - 1;
+ fifo->tx_curr_get_info.offset = 0;
+ fifo->tx_curr_get_info.fifo_len = tx_cfg->fifo_len - 1;
+ fifo->fifo_no = i;
+ fifo->nic = nic;
+ fifo->max_txds = MAX_SKB_FRAGS + 2;
+ fifo->dev = dev;
for (j = 0; j < page_num; j++) {
int k = 0;
@@ -699,8 +713,7 @@
PAGE_SIZE, &tmp_p);
if (!tmp_v) {
DBG_PRINT(INFO_DBG,
- "pci_alloc_consistent ");
- DBG_PRINT(INFO_DBG, "failed for TxDL\n");
+ "pci_alloc_consistent failed for TxDL\n");
return -ENOMEM;
}
/* If we got a zero DMA address(can happen on
@@ -711,37 +724,38 @@
if (!tmp_p) {
mac_control->zerodma_virt_addr = tmp_v;
DBG_PRINT(INIT_DBG,
- "%s: Zero DMA address for TxDL. ", dev->name);
- DBG_PRINT(INIT_DBG,
- "Virtual address %p\n", tmp_v);
+ "%s: Zero DMA address for TxDL. "
+ "Virtual address %p\n",
+ dev->name, tmp_v);
tmp_v = pci_alloc_consistent(nic->pdev,
- PAGE_SIZE, &tmp_p);
+ PAGE_SIZE, &tmp_p);
if (!tmp_v) {
DBG_PRINT(INFO_DBG,
- "pci_alloc_consistent ");
- DBG_PRINT(INFO_DBG, "failed for TxDL\n");
+ "pci_alloc_consistent failed for TxDL\n");
return -ENOMEM;
}
mem_allocated += PAGE_SIZE;
}
while (k < lst_per_page) {
int l = (j * lst_per_page) + k;
- if (l == config->tx_cfg[i].fifo_len)
+ if (l == tx_cfg->fifo_len)
break;
- mac_control->fifos[i].list_info[l].list_virt_addr =
- tmp_v + (k * lst_size);
- mac_control->fifos[i].list_info[l].list_phy_addr =
- tmp_p + (k * lst_size);
+ fifo->list_info[l].list_virt_addr =
+ tmp_v + (k * lst_size);
+ fifo->list_info[l].list_phy_addr =
+ tmp_p + (k * lst_size);
k++;
}
}
}
for (i = 0; i < config->tx_fifo_num; i++) {
- size = config->tx_cfg[i].fifo_len;
- mac_control->fifos[i].ufo_in_band_v
- = kcalloc(size, sizeof(u64), GFP_KERNEL);
- if (!mac_control->fifos[i].ufo_in_band_v)
+ struct fifo_info *fifo = &mac_control->fifos[i];
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ size = tx_cfg->fifo_len;
+ fifo->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
+ if (!fifo->ufo_in_band_v)
return -ENOMEM;
mem_allocated += (size * sizeof(u64));
}
@@ -749,20 +763,19 @@
/* Allocation and initialization of RXDs in Rings */
size = 0;
for (i = 0; i < config->rx_ring_num; i++) {
- if (config->rx_cfg[i].num_rxd %
- (rxd_count[nic->rxd_mode] + 1)) {
- DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
- DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
- i);
- DBG_PRINT(ERR_DBG, "RxDs per Block");
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+ struct ring_info *ring = &mac_control->rings[i];
+
+ if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) {
+ DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "
+ "multiple of RxDs per Block\n",
+ dev->name, i);
return FAILURE;
}
- size += config->rx_cfg[i].num_rxd;
- mac_control->rings[i].block_count =
- config->rx_cfg[i].num_rxd /
- (rxd_count[nic->rxd_mode] + 1 );
- mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
- mac_control->rings[i].block_count;
+ size += rx_cfg->num_rxd;
+ ring->block_count = rx_cfg->num_rxd /
+ (rxd_count[nic->rxd_mode] + 1);
+ ring->pkt_cnt = rx_cfg->num_rxd - ring->block_count;
}
if (nic->rxd_mode == RXD_MODE_1)
size = (size * (sizeof(struct RxD1)));
@@ -770,27 +783,27 @@
size = (size * (sizeof(struct RxD3)));
for (i = 0; i < config->rx_ring_num; i++) {
- mac_control->rings[i].rx_curr_get_info.block_index = 0;
- mac_control->rings[i].rx_curr_get_info.offset = 0;
- mac_control->rings[i].rx_curr_get_info.ring_len =
- config->rx_cfg[i].num_rxd - 1;
- mac_control->rings[i].rx_curr_put_info.block_index = 0;
- mac_control->rings[i].rx_curr_put_info.offset = 0;
- mac_control->rings[i].rx_curr_put_info.ring_len =
- config->rx_cfg[i].num_rxd - 1;
- mac_control->rings[i].nic = nic;
- mac_control->rings[i].ring_no = i;
- mac_control->rings[i].lro = lro_enable;
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+ struct ring_info *ring = &mac_control->rings[i];
- blk_cnt = config->rx_cfg[i].num_rxd /
- (rxd_count[nic->rxd_mode] + 1);
+ ring->rx_curr_get_info.block_index = 0;
+ ring->rx_curr_get_info.offset = 0;
+ ring->rx_curr_get_info.ring_len = rx_cfg->num_rxd - 1;
+ ring->rx_curr_put_info.block_index = 0;
+ ring->rx_curr_put_info.offset = 0;
+ ring->rx_curr_put_info.ring_len = rx_cfg->num_rxd - 1;
+ ring->nic = nic;
+ ring->ring_no = i;
+ ring->lro = lro_enable;
+
+ blk_cnt = rx_cfg->num_rxd / (rxd_count[nic->rxd_mode] + 1);
/* Allocating all the Rx blocks */
for (j = 0; j < blk_cnt; j++) {
struct rx_block_info *rx_blocks;
int l;
- rx_blocks = &mac_control->rings[i].rx_blocks[j];
- size = SIZE_OF_BLOCK; //size is always page size
+ rx_blocks = &ring->rx_blocks[j];
+ size = SIZE_OF_BLOCK; /* size is always page size */
tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
&tmp_p_addr);
if (tmp_v_addr == NULL) {
@@ -805,16 +818,16 @@
}
mem_allocated += size;
memset(tmp_v_addr, 0, size);
+
+ size = sizeof(struct rxd_info) *
+ rxd_count[nic->rxd_mode];
rx_blocks->block_virt_addr = tmp_v_addr;
rx_blocks->block_dma_addr = tmp_p_addr;
- rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
- rxd_count[nic->rxd_mode],
- GFP_KERNEL);
+ rx_blocks->rxds = kmalloc(size, GFP_KERNEL);
if (!rx_blocks->rxds)
return -ENOMEM;
- mem_allocated +=
- (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
- for (l=0; l<rxd_count[nic->rxd_mode];l++) {
+ mem_allocated += size;
+ for (l = 0; l < rxd_count[nic->rxd_mode]; l++) {
rx_blocks->rxds[l].virt_addr =
rx_blocks->block_virt_addr +
(rxd_size[nic->rxd_mode] * l);
@@ -825,22 +838,17 @@
}
/* Interlinking all Rx Blocks */
for (j = 0; j < blk_cnt; j++) {
- tmp_v_addr =
- mac_control->rings[i].rx_blocks[j].block_virt_addr;
- tmp_v_addr_next =
- mac_control->rings[i].rx_blocks[(j + 1) %
- blk_cnt].block_virt_addr;
- tmp_p_addr =
- mac_control->rings[i].rx_blocks[j].block_dma_addr;
- tmp_p_addr_next =
- mac_control->rings[i].rx_blocks[(j + 1) %
- blk_cnt].block_dma_addr;
+ int next = (j + 1) % blk_cnt;
+ tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
+ tmp_v_addr_next = ring->rx_blocks[next].block_virt_addr;
+ tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
+ tmp_p_addr_next = ring->rx_blocks[next].block_dma_addr;
- pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
+ pre_rxd_blk = (struct RxD_block *)tmp_v_addr;
pre_rxd_blk->reserved_2_pNext_RxD_block =
- (unsigned long) tmp_v_addr_next;
+ (unsigned long)tmp_v_addr_next;
pre_rxd_blk->pNext_RxD_Blk_physical =
- (u64) tmp_p_addr_next;
+ (u64)tmp_p_addr_next;
}
}
if (nic->rxd_mode == RXD_MODE_3B) {
@@ -849,48 +857,46 @@
* and the buffers as well.
*/
for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt = config->rx_cfg[i].num_rxd /
- (rxd_count[nic->rxd_mode]+ 1);
- mac_control->rings[i].ba =
- kmalloc((sizeof(struct buffAdd *) * blk_cnt),
- GFP_KERNEL);
- if (!mac_control->rings[i].ba)
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+ struct ring_info *ring = &mac_control->rings[i];
+
+ blk_cnt = rx_cfg->num_rxd /
+ (rxd_count[nic->rxd_mode] + 1);
+ size = sizeof(struct buffAdd *) * blk_cnt;
+ ring->ba = kmalloc(size, GFP_KERNEL);
+ if (!ring->ba)
return -ENOMEM;
- mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
+ mem_allocated += size;
for (j = 0; j < blk_cnt; j++) {
int k = 0;
- mac_control->rings[i].ba[j] =
- kmalloc((sizeof(struct buffAdd) *
- (rxd_count[nic->rxd_mode] + 1)),
- GFP_KERNEL);
- if (!mac_control->rings[i].ba[j])
- return -ENOMEM;
- mem_allocated += (sizeof(struct buffAdd) * \
- (rxd_count[nic->rxd_mode] + 1));
- while (k != rxd_count[nic->rxd_mode]) {
- ba = &mac_control->rings[i].ba[j][k];
- ba->ba_0_org = (void *) kmalloc
- (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
+ size = sizeof(struct buffAdd) *
+ (rxd_count[nic->rxd_mode] + 1);
+ ring->ba[j] = kmalloc(size, GFP_KERNEL);
+ if (!ring->ba[j])
+ return -ENOMEM;
+ mem_allocated += size;
+ while (k != rxd_count[nic->rxd_mode]) {
+ ba = &ring->ba[j][k];
+ size = BUF0_LEN + ALIGN_SIZE;
+ ba->ba_0_org = kmalloc(size, GFP_KERNEL);
if (!ba->ba_0_org)
return -ENOMEM;
- mem_allocated +=
- (BUF0_LEN + ALIGN_SIZE);
+ mem_allocated += size;
tmp = (unsigned long)ba->ba_0_org;
tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
- ba->ba_0 = (void *) tmp;
+ tmp &= ~((unsigned long)ALIGN_SIZE);
+ ba->ba_0 = (void *)tmp;
- ba->ba_1_org = (void *) kmalloc
- (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
+ size = BUF1_LEN + ALIGN_SIZE;
+ ba->ba_1_org = kmalloc(size, GFP_KERNEL);
if (!ba->ba_1_org)
return -ENOMEM;
- mem_allocated
- += (BUF1_LEN + ALIGN_SIZE);
- tmp = (unsigned long) ba->ba_1_org;
+ mem_allocated += size;
+ tmp = (unsigned long)ba->ba_1_org;
tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
- ba->ba_1 = (void *) tmp;
+ tmp &= ~((unsigned long)ALIGN_SIZE);
+ ba->ba_1 = (void *)tmp;
k++;
}
}
@@ -899,8 +905,9 @@
/* Allocation and initialization of Statistics block */
size = sizeof(struct stat_block);
- mac_control->stats_mem = pci_alloc_consistent
- (nic->pdev, size, &mac_control->stats_mem_phy);
+ mac_control->stats_mem =
+ pci_alloc_consistent(nic->pdev, size,
+ &mac_control->stats_mem_phy);
if (!mac_control->stats_mem) {
/*
@@ -914,10 +921,10 @@
mac_control->stats_mem_sz = size;
tmp_v_addr = mac_control->stats_mem;
- mac_control->stats_info = (struct stat_block *) tmp_v_addr;
+ mac_control->stats_info = (struct stat_block *)tmp_v_addr;
memset(tmp_v_addr, 0, size);
- DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
- (unsigned long long) tmp_p_addr);
+ DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
+ (unsigned long long)tmp_p_addr);
mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
return SUCCESS;
}
@@ -934,42 +941,46 @@
int i, j, blk_cnt, size;
void *tmp_v_addr;
dma_addr_t tmp_p_addr;
- struct mac_info *mac_control;
- struct config_param *config;
int lst_size, lst_per_page;
struct net_device *dev;
int page_num = 0;
+ struct config_param *config;
+ struct mac_info *mac_control;
+ struct stat_block *stats;
+ struct swStat *swstats;
if (!nic)
return;
dev = nic->dev;
- mac_control = &nic->mac_control;
config = &nic->config;
+ mac_control = &nic->mac_control;
+ stats = mac_control->stats_info;
+ swstats = &stats->sw_stat;
- lst_size = (sizeof(struct TxD) * config->max_txds);
+ lst_size = sizeof(struct TxD) * config->max_txds;
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
- page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
- lst_per_page);
+ struct fifo_info *fifo = &mac_control->fifos[i];
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ page_num = TXD_MEM_PAGE_CNT(tx_cfg->fifo_len, lst_per_page);
for (j = 0; j < page_num; j++) {
int mem_blks = (j * lst_per_page);
- if (!mac_control->fifos[i].list_info)
+ struct list_info_hold *fli;
+
+ if (!fifo->list_info)
return;
- if (!mac_control->fifos[i].list_info[mem_blks].
- list_virt_addr)
+
+ fli = &fifo->list_info[mem_blks];
+ if (!fli->list_virt_addr)
break;
pci_free_consistent(nic->pdev, PAGE_SIZE,
- mac_control->fifos[i].
- list_info[mem_blks].
- list_virt_addr,
- mac_control->fifos[i].
- list_info[mem_blks].
- list_phy_addr);
- nic->mac_control.stats_info->sw_stat.mem_freed
- += PAGE_SIZE;
+ fli->list_virt_addr,
+ fli->list_phy_addr);
+ swstats->mem_freed += PAGE_SIZE;
}
/* If we got a zero DMA address during allocation,
* free the page now
@@ -979,79 +990,80 @@
mac_control->zerodma_virt_addr,
(dma_addr_t)0);
DBG_PRINT(INIT_DBG,
- "%s: Freeing TxDL with zero DMA addr. ",
- dev->name);
- DBG_PRINT(INIT_DBG, "Virtual address %p\n",
- mac_control->zerodma_virt_addr);
- nic->mac_control.stats_info->sw_stat.mem_freed
- += PAGE_SIZE;
+ "%s: Freeing TxDL with zero DMA address. "
+ "Virtual address %p\n",
+ dev->name, mac_control->zerodma_virt_addr);
+ swstats->mem_freed += PAGE_SIZE;
}
- kfree(mac_control->fifos[i].list_info);
- nic->mac_control.stats_info->sw_stat.mem_freed +=
- (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
+ kfree(fifo->list_info);
+ swstats->mem_freed += tx_cfg->fifo_len *
+ sizeof(struct list_info_hold);
}
size = SIZE_OF_BLOCK;
for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt = mac_control->rings[i].block_count;
+ struct ring_info *ring = &mac_control->rings[i];
+
+ blk_cnt = ring->block_count;
for (j = 0; j < blk_cnt; j++) {
- tmp_v_addr = mac_control->rings[i].rx_blocks[j].
- block_virt_addr;
- tmp_p_addr = mac_control->rings[i].rx_blocks[j].
- block_dma_addr;
+ tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
+ tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
if (tmp_v_addr == NULL)
break;
pci_free_consistent(nic->pdev, size,
tmp_v_addr, tmp_p_addr);
- nic->mac_control.stats_info->sw_stat.mem_freed += size;
- kfree(mac_control->rings[i].rx_blocks[j].rxds);
- nic->mac_control.stats_info->sw_stat.mem_freed +=
- ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
+ swstats->mem_freed += size;
+ kfree(ring->rx_blocks[j].rxds);
+ swstats->mem_freed += sizeof(struct rxd_info) *
+ rxd_count[nic->rxd_mode];
}
}
if (nic->rxd_mode == RXD_MODE_3B) {
/* Freeing buffer storage addresses in 2BUFF mode. */
for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt = config->rx_cfg[i].num_rxd /
- (rxd_count[nic->rxd_mode] + 1);
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+ struct ring_info *ring = &mac_control->rings[i];
+
+ blk_cnt = rx_cfg->num_rxd /
+ (rxd_count[nic->rxd_mode] + 1);
for (j = 0; j < blk_cnt; j++) {
int k = 0;
- if (!mac_control->rings[i].ba[j])
+ if (!ring->ba[j])
continue;
while (k != rxd_count[nic->rxd_mode]) {
- struct buffAdd *ba =
- &mac_control->rings[i].ba[j][k];
+ struct buffAdd *ba = &ring->ba[j][k];
kfree(ba->ba_0_org);
- nic->mac_control.stats_info->sw_stat.\
- mem_freed += (BUF0_LEN + ALIGN_SIZE);
+ swstats->mem_freed +=
+ BUF0_LEN + ALIGN_SIZE;
kfree(ba->ba_1_org);
- nic->mac_control.stats_info->sw_stat.\
- mem_freed += (BUF1_LEN + ALIGN_SIZE);
+ swstats->mem_freed +=
+ BUF1_LEN + ALIGN_SIZE;
k++;
}
- kfree(mac_control->rings[i].ba[j]);
- nic->mac_control.stats_info->sw_stat.mem_freed +=
- (sizeof(struct buffAdd) *
- (rxd_count[nic->rxd_mode] + 1));
+ kfree(ring->ba[j]);
+ swstats->mem_freed += sizeof(struct buffAdd) *
+ (rxd_count[nic->rxd_mode] + 1);
}
- kfree(mac_control->rings[i].ba);
- nic->mac_control.stats_info->sw_stat.mem_freed +=
- (sizeof(struct buffAdd *) * blk_cnt);
+ kfree(ring->ba);
+ swstats->mem_freed += sizeof(struct buffAdd *) *
+ blk_cnt;
}
}
for (i = 0; i < nic->config.tx_fifo_num; i++) {
- if (mac_control->fifos[i].ufo_in_band_v) {
- nic->mac_control.stats_info->sw_stat.mem_freed
- += (config->tx_cfg[i].fifo_len * sizeof(u64));
- kfree(mac_control->fifos[i].ufo_in_band_v);
+ struct fifo_info *fifo = &mac_control->fifos[i];
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ if (fifo->ufo_in_band_v) {
+ swstats->mem_freed += tx_cfg->fifo_len *
+ sizeof(u64);
+ kfree(fifo->ufo_in_band_v);
}
}
if (mac_control->stats_mem) {
- nic->mac_control.stats_info->sw_stat.mem_freed +=
- mac_control->stats_mem_sz;
+ swstats->mem_freed += mac_control->stats_mem_sz;
pci_free_consistent(nic->pdev,
mac_control->stats_mem_sz,
mac_control->stats_mem,
@@ -1072,7 +1084,7 @@
val64 = readq(&bar0->pci_mode);
mode = (u8)GET_PCI_MODE(val64);
- if ( val64 & PCI_MODE_UNKNOWN_MODE)
+ if (val64 & PCI_MODE_UNKNOWN_MODE)
return -1; /* Unknown PCI mode */
return mode;
}
@@ -1103,55 +1115,54 @@
register u64 val64 = 0;
int mode;
struct config_param *config = &nic->config;
+ const char *pcimode;
val64 = readq(&bar0->pci_mode);
mode = (u8)GET_PCI_MODE(val64);
- if ( val64 & PCI_MODE_UNKNOWN_MODE)
+ if (val64 & PCI_MODE_UNKNOWN_MODE)
return -1; /* Unknown PCI mode */
config->bus_speed = bus_speed[mode];
if (s2io_on_nec_bridge(nic->pdev)) {
DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
- nic->dev->name);
+ nic->dev->name);
return mode;
}
- if (val64 & PCI_MODE_32_BITS) {
- DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
- } else {
- DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
+ switch (mode) {
+ case PCI_MODE_PCI_33:
+ pcimode = "33MHz PCI bus";
+ break;
+ case PCI_MODE_PCI_66:
+ pcimode = "66MHz PCI bus";
+ break;
+ case PCI_MODE_PCIX_M1_66:
+ pcimode = "66MHz PCIX(M1) bus";
+ break;
+ case PCI_MODE_PCIX_M1_100:
+ pcimode = "100MHz PCIX(M1) bus";
+ break;
+ case PCI_MODE_PCIX_M1_133:
+ pcimode = "133MHz PCIX(M1) bus";
+ break;
+ case PCI_MODE_PCIX_M2_66:
+ pcimode = "133MHz PCIX(M2) bus";
+ break;
+ case PCI_MODE_PCIX_M2_100:
+ pcimode = "200MHz PCIX(M2) bus";
+ break;
+ case PCI_MODE_PCIX_M2_133:
+ pcimode = "266MHz PCIX(M2) bus";
+ break;
+ default:
+ pcimode = "unsupported bus!";
+ mode = -1;
}
- switch(mode) {
- case PCI_MODE_PCI_33:
- DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
- break;
- case PCI_MODE_PCI_66:
- DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
- break;
- case PCI_MODE_PCIX_M1_66:
- DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
- break;
- case PCI_MODE_PCIX_M1_100:
- DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
- break;
- case PCI_MODE_PCIX_M1_133:
- DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
- break;
- case PCI_MODE_PCIX_M2_66:
- DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
- break;
- case PCI_MODE_PCIX_M2_100:
- DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
- break;
- case PCI_MODE_PCIX_M2_133:
- DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
- break;
- default:
- return -1; /* Unsupported bus speed */
- }
+ DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",
+ nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode);
return mode;
}
@@ -1171,9 +1182,7 @@
struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
int i;
- struct config_param *config;
-
- config = &nic->config;
+ struct config_param *config = &nic->config;
for (i = 0; i < config->tx_fifo_num; i++) {
/*
@@ -1188,9 +1197,9 @@
val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
- TTI_DATA1_MEM_TX_URNG_B(0x10) |
- TTI_DATA1_MEM_TX_URNG_C(0x30) |
- TTI_DATA1_MEM_TX_TIMER_AC_EN;
+ TTI_DATA1_MEM_TX_URNG_B(0x10) |
+ TTI_DATA1_MEM_TX_URNG_C(0x30) |
+ TTI_DATA1_MEM_TX_TIMER_AC_EN;
if (i == 0)
if (use_continuous_tx_intrs && (link == LINK_UP))
val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
@@ -1203,11 +1212,11 @@
TTI_DATA2_MEM_TX_UFC_D(0x300);
} else {
if ((nic->config.tx_steering_type ==
- TX_DEFAULT_STEERING) &&
- (config->tx_fifo_num > 1) &&
- (i >= nic->udp_fifo_idx) &&
- (i < (nic->udp_fifo_idx +
- nic->total_udp_fifos)))
+ TX_DEFAULT_STEERING) &&
+ (config->tx_fifo_num > 1) &&
+ (i >= nic->udp_fifo_idx) &&
+ (i < (nic->udp_fifo_idx +
+ nic->total_udp_fifos)))
val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
TTI_DATA2_MEM_TX_UFC_B(0x80) |
TTI_DATA2_MEM_TX_UFC_C(0x100) |
@@ -1221,12 +1230,14 @@
writeq(val64, &bar0->tti_data2_mem);
- val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
- TTI_CMD_MEM_OFFSET(i);
+ val64 = TTI_CMD_MEM_WE |
+ TTI_CMD_MEM_STROBE_NEW_CMD |
+ TTI_CMD_MEM_OFFSET(i);
writeq(val64, &bar0->tti_command_mem);
if (wait_for_cmd_complete(&bar0->tti_command_mem,
- TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
+ TTI_CMD_MEM_STROBE_NEW_CMD,
+ S2IO_BIT_RESET) != SUCCESS)
return FAILURE;
}
@@ -1250,18 +1261,15 @@
void __iomem *add;
u32 time;
int i, j;
- struct mac_info *mac_control;
- struct config_param *config;
int dtx_cnt = 0;
unsigned long long mem_share;
int mem_size;
-
- mac_control = &nic->mac_control;
- config = &nic->config;
+ struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
/* to set the swapper controle on the card */
- if(s2io_set_swapper(nic)) {
- DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
+ if (s2io_set_swapper(nic)) {
+ DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");
return -EIO;
}
@@ -1300,7 +1308,7 @@
val64 = readq(&bar0->mac_cfg);
val64 |= MAC_RMAC_BCAST_ENABLE;
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
- writel((u32) val64, add);
+ writel((u32)val64, add);
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
@@ -1337,12 +1345,11 @@
writeq(val64, &bar0->tx_fifo_partition_2);
writeq(val64, &bar0->tx_fifo_partition_3);
-
for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
- val64 |=
- vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
- 13) | vBIT(config->tx_cfg[i].fifo_priority,
- ((j * 32) + 5), 3);
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ val64 |= vBIT(tx_cfg->fifo_len - 1, ((j * 32) + 19), 13) |
+ vBIT(tx_cfg->fifo_priority, ((j * 32) + 5), 3);
if (i == (config->tx_fifo_num - 1)) {
if (i % 2 == 0)
@@ -1380,29 +1387,30 @@
* Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
*/
- if ((nic->device_type == XFRAME_I_DEVICE) &&
- (nic->pdev->revision < 4))
+ if ((nic->device_type == XFRAME_I_DEVICE) && (nic->pdev->revision < 4))
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
val64 = readq(&bar0->tx_fifo_partition_0);
DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
- &bar0->tx_fifo_partition_0, (unsigned long long) val64);
+ &bar0->tx_fifo_partition_0, (unsigned long long)val64);
/*
* Initialization of Tx_PA_CONFIG register to ignore packet
* integrity checking.
*/
val64 = readq(&bar0->tx_pa_cfg);
- val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
- TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
+ val64 |= TX_PA_CFG_IGNORE_FRM_ERR |
+ TX_PA_CFG_IGNORE_SNAP_OUI |
+ TX_PA_CFG_IGNORE_LLC_CTRL |
+ TX_PA_CFG_IGNORE_L2_ERR;
writeq(val64, &bar0->tx_pa_cfg);
/* Rx DMA intialization. */
val64 = 0;
for (i = 0; i < config->rx_ring_num; i++) {
- val64 |=
- vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
- 3);
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+
+ val64 |= vBIT(rx_cfg->ring_priority, (5 + (i * 8)), 3);
}
writeq(val64, &bar0->rx_queue_priority);
@@ -1686,16 +1694,16 @@
*/
if (rts_frm_len[i] != 0) {
writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
- &bar0->rts_frm_len_n[i]);
+ &bar0->rts_frm_len_n[i]);
}
}
/* Disable differentiated services steering logic */
for (i = 0; i < 64; i++) {
if (rts_ds_steer(nic, i, 0) == FAILURE) {
- DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
- dev->name);
- DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
+ DBG_PRINT(ERR_DBG,
+ "%s: rts_ds_steer failed on codepoint %d\n",
+ dev->name, i);
return -ENODEV;
}
}
@@ -1713,7 +1721,7 @@
* bandwidth utilization.
*/
val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
- MAC_RX_LINK_UTIL_VAL(rmac_util_period);
+ MAC_RX_LINK_UTIL_VAL(rmac_util_period);
writeq(val64, &bar0->mac_link_util);
/*
@@ -1736,24 +1744,26 @@
} else
val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
- RTI_DATA1_MEM_RX_URNG_B(0x10) |
- RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
+ RTI_DATA1_MEM_RX_URNG_B(0x10) |
+ RTI_DATA1_MEM_RX_URNG_C(0x30) |
+ RTI_DATA1_MEM_RX_TIMER_AC_EN;
writeq(val64, &bar0->rti_data1_mem);
val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
RTI_DATA2_MEM_RX_UFC_B(0x2) ;
if (nic->config.intr_type == MSI_X)
- val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
- RTI_DATA2_MEM_RX_UFC_D(0x40));
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) |
+ RTI_DATA2_MEM_RX_UFC_D(0x40));
else
- val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
- RTI_DATA2_MEM_RX_UFC_D(0x80));
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) |
+ RTI_DATA2_MEM_RX_UFC_D(0x80));
writeq(val64, &bar0->rti_data2_mem);
for (i = 0; i < config->rx_ring_num; i++) {
- val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
- | RTI_CMD_MEM_OFFSET(i);
+ val64 = RTI_CMD_MEM_WE |
+ RTI_CMD_MEM_STROBE_NEW_CMD |
+ RTI_CMD_MEM_OFFSET(i);
writeq(val64, &bar0->rti_command_mem);
/*
@@ -1770,7 +1780,7 @@
break;
if (time > 10) {
- DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
+ DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",
dev->name);
return -ENODEV;
}
@@ -1826,19 +1836,17 @@
*/
val64 = 0;
for (i = 0; i < 4; i++) {
- val64 |=
- (((u64) 0xFF00 | nic->mac_control.
- mc_pause_threshold_q0q3)
- << (i * 2 * 8));
+ val64 |= (((u64)0xFF00 |
+ nic->mac_control.mc_pause_threshold_q0q3)
+ << (i * 2 * 8));
}
writeq(val64, &bar0->mc_pause_thresh_q0q3);
val64 = 0;
for (i = 0; i < 4; i++) {
- val64 |=
- (((u64) 0xFF00 | nic->mac_control.
- mc_pause_threshold_q4q7)
- << (i * 2 * 8));
+ val64 |= (((u64)0xFF00 |
+ nic->mac_control.mc_pause_threshold_q4q7)
+ << (i * 2 * 8));
}
writeq(val64, &bar0->mc_pause_thresh_q4q7);
@@ -1901,10 +1909,10 @@
temp64 = readq(addr);
- if(flag == ENABLE_INTRS)
- temp64 &= ~((u64) value);
+ if (flag == ENABLE_INTRS)
+ temp64 &= ~((u64)value);
else
- temp64 |= ((u64) value);
+ temp64 |= ((u64)value);
writeq(temp64, addr);
}
@@ -1916,124 +1924,125 @@
writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask);
if (mask & TX_DMA_INTR) {
-
gen_int_mask |= TXDMA_INT_M;
do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
- TXDMA_PCC_INT | TXDMA_TTI_INT |
- TXDMA_LSO_INT | TXDMA_TPA_INT |
- TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
+ TXDMA_PCC_INT | TXDMA_TTI_INT |
+ TXDMA_LSO_INT | TXDMA_TPA_INT |
+ TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
- PFC_MISC_0_ERR | PFC_MISC_1_ERR |
- PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
- &bar0->pfc_err_mask);
+ PFC_MISC_0_ERR | PFC_MISC_1_ERR |
+ PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
+ &bar0->pfc_err_mask);
do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
- TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
- TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
+ TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
+ TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
- PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
- PCC_N_SERR | PCC_6_COF_OV_ERR |
- PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
- PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
- PCC_TXB_ECC_SG_ERR, flag, &bar0->pcc_err_mask);
+ PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
+ PCC_N_SERR | PCC_6_COF_OV_ERR |
+ PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
+ PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
+ PCC_TXB_ECC_SG_ERR,
+ flag, &bar0->pcc_err_mask);
do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
- TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
+ TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
- LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
- LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
- flag, &bar0->lso_err_mask);
+ LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
+ LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
+ flag, &bar0->lso_err_mask);
do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
- flag, &bar0->tpa_err_mask);
+ flag, &bar0->tpa_err_mask);
do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
-
}
if (mask & TX_MAC_INTR) {
gen_int_mask |= TXMAC_INT_M;
do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
- &bar0->mac_int_mask);
+ &bar0->mac_int_mask);
do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
- TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
- TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
- flag, &bar0->mac_tmac_err_mask);
+ TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
+ TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
+ flag, &bar0->mac_tmac_err_mask);
}
if (mask & TX_XGXS_INTR) {
gen_int_mask |= TXXGXS_INT_M;
do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
- &bar0->xgxs_int_mask);
+ &bar0->xgxs_int_mask);
do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
- TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
- flag, &bar0->xgxs_txgxs_err_mask);
+ TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
+ flag, &bar0->xgxs_txgxs_err_mask);
}
if (mask & RX_DMA_INTR) {
gen_int_mask |= RXDMA_INT_M;
do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
- RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
- flag, &bar0->rxdma_int_mask);
+ RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
+ flag, &bar0->rxdma_int_mask);
do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
- RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
- RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
- RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
+ RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
+ RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
+ RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
- PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
- PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
- &bar0->prc_pcix_err_mask);
+ PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
+ PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
+ &bar0->prc_pcix_err_mask);
do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
- RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
- &bar0->rpa_err_mask);
+ RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
+ &bar0->rpa_err_mask);
do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
- RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
- RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
- RDA_FRM_ECC_SG_ERR | RDA_MISC_ERR|RDA_PCIX_ERR,
- flag, &bar0->rda_err_mask);
+ RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
+ RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
+ RDA_FRM_ECC_SG_ERR |
+ RDA_MISC_ERR|RDA_PCIX_ERR,
+ flag, &bar0->rda_err_mask);
do_s2io_write_bits(RTI_SM_ERR_ALARM |
- RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
- flag, &bar0->rti_err_mask);
+ RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
+ flag, &bar0->rti_err_mask);
}
if (mask & RX_MAC_INTR) {
gen_int_mask |= RXMAC_INT_M;
do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
- &bar0->mac_int_mask);
- interruptible = RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
- RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
- RMAC_DOUBLE_ECC_ERR;
+ &bar0->mac_int_mask);
+ interruptible = (RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
+ RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
+ RMAC_DOUBLE_ECC_ERR);
if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER)
interruptible |= RMAC_LINK_STATE_CHANGE_INT;
do_s2io_write_bits(interruptible,
- flag, &bar0->mac_rmac_err_mask);
+ flag, &bar0->mac_rmac_err_mask);
}
- if (mask & RX_XGXS_INTR)
- {
+ if (mask & RX_XGXS_INTR) {
gen_int_mask |= RXXGXS_INT_M;
do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
- &bar0->xgxs_int_mask);
+ &bar0->xgxs_int_mask);
do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
- &bar0->xgxs_rxgxs_err_mask);
+ &bar0->xgxs_rxgxs_err_mask);
}
if (mask & MC_INTR) {
gen_int_mask |= MC_INT_M;
- do_s2io_write_bits(MC_INT_MASK_MC_INT, flag, &bar0->mc_int_mask);
+ do_s2io_write_bits(MC_INT_MASK_MC_INT,
+ flag, &bar0->mc_int_mask);
do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
- MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
- &bar0->mc_err_mask);
+ MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
+ &bar0->mc_err_mask);
}
nic->general_int_mask = gen_int_mask;
/* Remove this line when alarm interrupts are enabled */
nic->general_int_mask = 0;
}
+
/**
* en_dis_able_nic_intrs - Enable or Disable the interrupts
* @nic: device private variable,
@@ -2065,11 +2074,11 @@
* TODO
*/
if (s2io_link_fault_indication(nic) ==
- LINK_UP_DOWN_INTERRUPT ) {
+ LINK_UP_DOWN_INTERRUPT) {
do_s2io_write_bits(PIC_INT_GPIO, flag,
- &bar0->pic_int_mask);
+ &bar0->pic_int_mask);
do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
- &bar0->gpio_int_mask);
+ &bar0->gpio_int_mask);
} else
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
} else if (flag == DISABLE_INTRS) {
@@ -2116,7 +2125,7 @@
temp64 = readq(&bar0->general_int_mask);
if (flag == ENABLE_INTRS)
- temp64 &= ~((u64) intr_mask);
+ temp64 &= ~((u64)intr_mask);
else
temp64 = DISABLE_ALL_INTRS;
writeq(temp64, &bar0->general_int_mask);
@@ -2177,35 +2186,35 @@
mode = s2io_verify_pci_mode(sp);
if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
+ DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
+ DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
+ DBG_PRINT(ERR_DBG, "PFC is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
- DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
+ DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
- DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
+ DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
+ DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
+ DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
- DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
+ DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");
return 0;
}
@@ -2215,14 +2224,14 @@
* not be asserted.
*/
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
- sp->device_type == XFRAME_II_DEVICE && mode !=
- PCI_MODE_PCI_33) {
- DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
+ sp->device_type == XFRAME_II_DEVICE &&
+ mode != PCI_MODE_PCI_33) {
+ DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");
return 0;
}
if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
- DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
+ ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");
return 0;
}
return 1;
@@ -2236,7 +2245,7 @@
*
*/
-static void fix_mac_address(struct s2io_nic * sp)
+static void fix_mac_address(struct s2io_nic *sp)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
@@ -2268,15 +2277,14 @@
struct net_device *dev = nic->dev;
register u64 val64 = 0;
u16 subid, i;
- struct mac_info *mac_control;
- struct config_param *config;
-
- mac_control = &nic->mac_control;
- config = &nic->config;
+ struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
/* PRC Initialization and configuration */
for (i = 0; i < config->rx_ring_num; i++) {
- writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
+ struct ring_info *ring = &mac_control->rings[i];
+
+ writeq((u64)ring->rx_blocks[0].block_dma_addr,
&bar0->prc_rxd0_n[i]);
val64 = readq(&bar0->prc_ctrl_n[i]);
@@ -2328,9 +2336,9 @@
*/
val64 = readq(&bar0->adapter_status);
if (!verify_xena_quiescence(nic)) {
- DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
- DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
- (unsigned long long) val64);
+ DBG_PRINT(ERR_DBG, "%s: device is not ready, "
+ "Adapter status reads: 0x%llx\n",
+ dev->name, (unsigned long long)val64);
return FAILURE;
}
@@ -2370,8 +2378,8 @@
/**
* s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
*/
-static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
- TxD *txdlp, int get_off)
+static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data,
+ struct TxD *txdlp, int get_off)
{
struct s2io_nic *nic = fifo_data->nic;
struct sk_buff *skb;
@@ -2380,22 +2388,18 @@
txds = txdlp;
if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
- pci_unmap_single(nic->pdev, (dma_addr_t)
- txds->Buffer_Pointer, sizeof(u64),
- PCI_DMA_TODEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
+ sizeof(u64), PCI_DMA_TODEVICE);
txds++;
}
- skb = (struct sk_buff *) ((unsigned long)
- txds->Host_Control);
+ skb = (struct sk_buff *)((unsigned long)txds->Host_Control);
if (!skb) {
memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
return NULL;
}
- pci_unmap_single(nic->pdev, (dma_addr_t)
- txds->Buffer_Pointer,
- skb->len - skb->data_len,
- PCI_DMA_TODEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
+ skb->len - skb->data_len, PCI_DMA_TODEVICE);
frg_cnt = skb_shinfo(skb)->nr_frags;
if (frg_cnt) {
txds++;
@@ -2403,13 +2407,13 @@
skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
if (!txds->Buffer_Pointer)
break;
- pci_unmap_page(nic->pdev, (dma_addr_t)
- txds->Buffer_Pointer,
+ pci_unmap_page(nic->pdev,
+ (dma_addr_t)txds->Buffer_Pointer,
frag->size, PCI_DMA_TODEVICE);
}
}
- memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
- return(skb);
+ memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
+ return skb;
}
/**
@@ -2418,7 +2422,7 @@
* Description:
* Free all queued Tx buffers.
* Return Value: void
-*/
+ */
static void free_tx_buffers(struct s2io_nic *nic)
{
@@ -2426,33 +2430,33 @@
struct sk_buff *skb;
struct TxD *txdp;
int i, j;
- struct mac_info *mac_control;
- struct config_param *config;
int cnt = 0;
-
- mac_control = &nic->mac_control;
- config = &nic->config;
+ struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
+ struct stat_block *stats = mac_control->stats_info;
+ struct swStat *swstats = &stats->sw_stat;
for (i = 0; i < config->tx_fifo_num; i++) {
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+ struct fifo_info *fifo = &mac_control->fifos[i];
unsigned long flags;
- spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
- for (j = 0; j < config->tx_cfg[i].fifo_len; j++) {
- txdp = (struct TxD *) \
- mac_control->fifos[i].list_info[j].list_virt_addr;
+
+ spin_lock_irqsave(&fifo->tx_lock, flags);
+ for (j = 0; j < tx_cfg->fifo_len; j++) {
+ txdp = (struct TxD *)fifo->list_info[j].list_virt_addr;
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
if (skb) {
- nic->mac_control.stats_info->sw_stat.mem_freed
- += skb->truesize;
+ swstats->mem_freed += skb->truesize;
dev_kfree_skb(skb);
cnt++;
}
}
DBG_PRINT(INTR_DBG,
- "%s:forcibly freeing %d skbs on FIFO%d\n",
+ "%s: forcibly freeing %d skbs on FIFO%d\n",
dev->name, cnt, i);
- mac_control->fifos[i].tx_curr_get_info.offset = 0;
- mac_control->fifos[i].tx_curr_put_info.offset = 0;
- spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock, flags);
+ fifo->tx_curr_get_info.offset = 0;
+ fifo->tx_curr_put_info.offset = 0;
+ spin_unlock_irqrestore(&fifo->tx_lock, flags);
}
}
@@ -2471,11 +2475,6 @@
struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
u16 interruptible;
- struct mac_info *mac_control;
- struct config_param *config;
-
- mac_control = &nic->mac_control;
- config = &nic->config;
/* Disable all interrupts */
en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
@@ -2512,7 +2511,7 @@
* SUCCESS on success or an appropriate -ve value on failure.
*/
static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
- int from_card_up)
+ int from_card_up)
{
struct sk_buff *skb;
struct RxD_t *rxdp;
@@ -2526,7 +2525,7 @@
int rxd_index = 0;
struct RxD1 *rxdp1;
struct RxD3 *rxdp3;
- struct swStat *stats = &ring->nic->mac_control.stats_info->sw_stat;
+ struct swStat *swstats = &ring->nic->mac_control.stats_info->sw_stat;
alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
@@ -2543,17 +2542,16 @@
rxd_index += (block_no * ring->rxd_count);
if ((block_no == block_no1) &&
- (off == ring->rx_curr_get_info.offset) &&
- (rxdp->Host_Control)) {
- DBG_PRINT(INTR_DBG, "%s: Get and Put",
- ring->dev->name);
- DBG_PRINT(INTR_DBG, " info equated\n");
+ (off == ring->rx_curr_get_info.offset) &&
+ (rxdp->Host_Control)) {
+ DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n",
+ ring->dev->name);
goto end;
}
if (off && (off == ring->rxd_count)) {
ring->rx_curr_put_info.block_index++;
if (ring->rx_curr_put_info.block_index ==
- ring->block_count)
+ ring->block_count)
ring->rx_curr_put_info.block_index = 0;
block_no = ring->rx_curr_put_info.block_index;
off = 0;
@@ -2565,14 +2563,15 @@
}
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
- ((ring->rxd_mode == RXD_MODE_3B) &&
- (rxdp->Control_2 & s2BIT(0)))) {
+ ((ring->rxd_mode == RXD_MODE_3B) &&
+ (rxdp->Control_2 & s2BIT(0)))) {
ring->rx_curr_put_info.offset = off;
goto end;
}
/* calculate size of skb based on ring mode */
- size = ring->mtu + HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
+ size = ring->mtu +
+ HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
if (ring->rxd_mode == RXD_MODE_1)
size += NET_IP_ALIGN;
else
@@ -2580,34 +2579,35 @@
/* allocate skb */
skb = dev_alloc_skb(size);
- if(!skb) {
- DBG_PRINT(INFO_DBG, "%s: Out of ", ring->dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
+ if (!skb) {
+ DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n",
+ ring->dev->name);
if (first_rxdp) {
wmb();
first_rxdp->Control_1 |= RXD_OWN_XENA;
}
- stats->mem_alloc_fail_cnt++;
+ swstats->mem_alloc_fail_cnt++;
return -ENOMEM ;
}
- stats->mem_allocated += skb->truesize;
+ swstats->mem_allocated += skb->truesize;
if (ring->rxd_mode == RXD_MODE_1) {
/* 1 buffer mode - normal operation mode */
- rxdp1 = (struct RxD1*)rxdp;
+ rxdp1 = (struct RxD1 *)rxdp;
memset(rxdp, 0, sizeof(struct RxD1));
skb_reserve(skb, NET_IP_ALIGN);
- rxdp1->Buffer0_ptr = pci_map_single
- (ring->pdev, skb->data, size - NET_IP_ALIGN,
- PCI_DMA_FROMDEVICE);
+ rxdp1->Buffer0_ptr =
+ pci_map_single(ring->pdev, skb->data,
+ size - NET_IP_ALIGN,
+ PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(nic->pdev,
- rxdp1->Buffer0_ptr))
+ rxdp1->Buffer0_ptr))
goto pci_map_failed;
rxdp->Control_2 =
SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
- rxdp->Host_Control = (unsigned long) (skb);
+ rxdp->Host_Control = (unsigned long)skb;
} else if (ring->rxd_mode == RXD_MODE_3B) {
/*
* 2 buffer mode -
@@ -2615,7 +2615,7 @@
* byte aligned receive buffers.
*/
- rxdp3 = (struct RxD3*)rxdp;
+ rxdp3 = (struct RxD3 *)rxdp;
/* save buffer pointers to avoid frequent dma mapping */
Buffer0_ptr = rxdp3->Buffer0_ptr;
Buffer1_ptr = rxdp3->Buffer1_ptr;
@@ -2626,7 +2626,7 @@
ba = &ring->ba[block_no][off];
skb_reserve(skb, BUF0_LEN);
- tmp = (u64)(unsigned long) skb->data;
+ tmp = (u64)(unsigned long)skb->data;
tmp += ALIGN_SIZE;
tmp &= ~ALIGN_SIZE;
skb->data = (void *) (unsigned long)tmp;
@@ -2634,15 +2634,17 @@
if (from_card_up) {
rxdp3->Buffer0_ptr =
- pci_map_single(ring->pdev, ba->ba_0,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(nic->pdev,
- rxdp3->Buffer0_ptr))
+ pci_map_single(ring->pdev, ba->ba_0,
+ BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(nic->pdev,
+ rxdp3->Buffer0_ptr))
goto pci_map_failed;
} else
pci_dma_sync_single_for_device(ring->pdev,
- (dma_addr_t) rxdp3->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
+ (dma_addr_t)rxdp3->Buffer0_ptr,
+ BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
if (ring->rxd_mode == RXD_MODE_3B) {
@@ -2652,34 +2654,35 @@
* Buffer2 will have L3/L4 header plus
* L4 payload
*/
- rxdp3->Buffer2_ptr = pci_map_single
- (ring->pdev, skb->data, ring->mtu + 4,
- PCI_DMA_FROMDEVICE);
+ rxdp3->Buffer2_ptr = pci_map_single(ring->pdev,
+ skb->data,
+ ring->mtu + 4,
+ PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(nic->pdev,
- rxdp3->Buffer2_ptr))
+ rxdp3->Buffer2_ptr))
goto pci_map_failed;
if (from_card_up) {
rxdp3->Buffer1_ptr =
pci_map_single(ring->pdev,
- ba->ba_1, BUF1_LEN,
- PCI_DMA_FROMDEVICE);
+ ba->ba_1,
+ BUF1_LEN,
+ PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(nic->pdev,
- rxdp3->Buffer1_ptr)) {
- pci_unmap_single
- (ring->pdev,
- (dma_addr_t)(unsigned long)
- skb->data,
- ring->mtu + 4,
- PCI_DMA_FROMDEVICE);
+ rxdp3->Buffer1_ptr)) {
+ pci_unmap_single(ring->pdev,
+ (dma_addr_t)(unsigned long)
+ skb->data,
+ ring->mtu + 4,
+ PCI_DMA_FROMDEVICE);
goto pci_map_failed;
}
}
rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
rxdp->Control_2 |= SET_BUFFER2_SIZE_3
- (ring->mtu + 4);
+ (ring->mtu + 4);
}
rxdp->Control_2 |= s2BIT(0);
rxdp->Host_Control = (unsigned long) (skb);
@@ -2703,7 +2706,7 @@
alloc_tab++;
}
- end:
+end:
/* Transfer ownership of first descriptor to adapter just before
* exiting. Before that, use memory barrier so that ownership
* and other fields are seen by adapter correctly.
@@ -2714,9 +2717,10 @@
}
return SUCCESS;
+
pci_map_failed:
- stats->pci_map_fail_cnt++;
- stats->mem_freed += skb->truesize;
+ swstats->pci_map_fail_cnt++;
+ swstats->mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
return -ENOMEM;
}
@@ -2727,49 +2731,46 @@
int j;
struct sk_buff *skb;
struct RxD_t *rxdp;
- struct mac_info *mac_control;
struct buffAdd *ba;
struct RxD1 *rxdp1;
struct RxD3 *rxdp3;
+ struct mac_info *mac_control = &sp->mac_control;
+ struct stat_block *stats = mac_control->stats_info;
+ struct swStat *swstats = &stats->sw_stat;
- mac_control = &sp->mac_control;
for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
rxdp = mac_control->rings[ring_no].
- rx_blocks[blk].rxds[j].virt_addr;
- skb = (struct sk_buff *)
- ((unsigned long) rxdp->Host_Control);
- if (!skb) {
+ rx_blocks[blk].rxds[j].virt_addr;
+ skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
+ if (!skb)
continue;
- }
if (sp->rxd_mode == RXD_MODE_1) {
- rxdp1 = (struct RxD1*)rxdp;
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp1->Buffer0_ptr,
- dev->mtu +
- HEADER_ETHERNET_II_802_3_SIZE
- + HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
+ rxdp1 = (struct RxD1 *)rxdp;
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp1->Buffer0_ptr,
+ dev->mtu +
+ HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE + HEADER_SNAP_SIZE,
+ PCI_DMA_FROMDEVICE);
memset(rxdp, 0, sizeof(struct RxD1));
- } else if(sp->rxd_mode == RXD_MODE_3B) {
- rxdp3 = (struct RxD3*)rxdp;
- ba = &mac_control->rings[ring_no].
- ba[blk][j];
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp3->Buffer0_ptr,
- BUF0_LEN,
- PCI_DMA_FROMDEVICE);
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp3->Buffer1_ptr,
- BUF1_LEN,
- PCI_DMA_FROMDEVICE);
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp3->Buffer2_ptr,
- dev->mtu + 4,
- PCI_DMA_FROMDEVICE);
+ } else if (sp->rxd_mode == RXD_MODE_3B) {
+ rxdp3 = (struct RxD3 *)rxdp;
+ ba = &mac_control->rings[ring_no].ba[blk][j];
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp3->Buffer0_ptr,
+ BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp3->Buffer1_ptr,
+ BUF1_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp3->Buffer2_ptr,
+ dev->mtu + 4,
+ PCI_DMA_FROMDEVICE);
memset(rxdp, 0, sizeof(struct RxD3));
}
- sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
+ swstats->mem_freed += skb->truesize;
dev_kfree_skb(skb);
mac_control->rings[ring_no].rx_bufs_left -= 1;
}
@@ -2788,22 +2789,21 @@
{
struct net_device *dev = sp->dev;
int i, blk = 0, buf_cnt = 0;
- struct mac_info *mac_control;
- struct config_param *config;
-
- mac_control = &sp->mac_control;
- config = &sp->config;
+ struct config_param *config = &sp->config;
+ struct mac_info *mac_control = &sp->mac_control;
for (i = 0; i < config->rx_ring_num; i++) {
- for (blk = 0; blk < rx_ring_sz[i]; blk++)
- free_rxd_blk(sp,i,blk);
+ struct ring_info *ring = &mac_control->rings[i];
- mac_control->rings[i].rx_curr_put_info.block_index = 0;
- mac_control->rings[i].rx_curr_get_info.block_index = 0;
- mac_control->rings[i].rx_curr_put_info.offset = 0;
- mac_control->rings[i].rx_curr_get_info.offset = 0;
- mac_control->rings[i].rx_bufs_left = 0;
- DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
+ for (blk = 0; blk < rx_ring_sz[i]; blk++)
+ free_rxd_blk(sp, i, blk);
+
+ ring->rx_curr_put_info.block_index = 0;
+ ring->rx_curr_get_info.block_index = 0;
+ ring->rx_curr_put_info.offset = 0;
+ ring->rx_curr_get_info.offset = 0;
+ ring->rx_bufs_left = 0;
+ DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n",
dev->name, buf_cnt, i);
}
}
@@ -2811,8 +2811,8 @@
static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
{
if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+ DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n",
+ ring->dev->name);
}
return 0;
}
@@ -2834,8 +2834,6 @@
{
struct ring_info *ring = container_of(napi, struct ring_info, napi);
struct net_device *dev = ring->dev;
- struct config_param *config;
- struct mac_info *mac_control;
int pkts_processed = 0;
u8 __iomem *addr = NULL;
u8 val8 = 0;
@@ -2843,9 +2841,6 @@
struct XENA_dev_config __iomem *bar0 = nic->bar0;
int budget_org = budget;
- config = &nic->config;
- mac_control = &nic->mac_control;
-
if (unlikely(!is_s2io_card_up(nic)))
return 0;
@@ -2863,25 +2858,22 @@
}
return pkts_processed;
}
+
static int s2io_poll_inta(struct napi_struct *napi, int budget)
{
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
- struct ring_info *ring;
- struct config_param *config;
- struct mac_info *mac_control;
int pkts_processed = 0;
int ring_pkts_processed, i;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
int budget_org = budget;
-
- config = &nic->config;
- mac_control = &nic->mac_control;
+ struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
if (unlikely(!is_s2io_card_up(nic)))
return 0;
for (i = 0; i < config->rx_ring_num; i++) {
- ring = &mac_control->rings[i];
+ struct ring_info *ring = &mac_control->rings[i];
ring_pkts_processed = rx_intr_handler(ring, budget);
s2io_chk_rx_buffers(nic, ring);
pkts_processed += ring_pkts_processed;
@@ -2911,20 +2903,17 @@
static void s2io_netpoll(struct net_device *dev)
{
struct s2io_nic *nic = netdev_priv(dev);
- struct mac_info *mac_control;
- struct config_param *config;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
int i;
+ struct config_param *config = &nic->config;
+ struct mac_info *mac_control = &nic->mac_control;
if (pci_channel_offline(nic->pdev))
return;
disable_irq(dev->irq);
- mac_control = &nic->mac_control;
- config = &nic->config;
-
writeq(val64, &bar0->rx_traffic_int);
writeq(val64, &bar0->tx_traffic_int);
@@ -2936,14 +2925,19 @@
tx_intr_handler(&mac_control->fifos[i]);
/* check for received packet and indicate up to network */
- for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i], 0);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ struct ring_info *ring = &mac_control->rings[i];
+
+ rx_intr_handler(ring, 0);
+ }
for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(nic, &mac_control->rings[i], 0) ==
- -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
+ struct ring_info *ring = &mac_control->rings[i];
+
+ if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
+ DBG_PRINT(INFO_DBG,
+ "%s: Out of memory in Rx Netpoll!!\n",
+ dev->name);
break;
}
}
@@ -2973,8 +2967,8 @@
struct sk_buff *skb;
int pkt_cnt = 0, napi_pkts = 0;
int i;
- struct RxD1* rxdp1;
- struct RxD3* rxdp3;
+ struct RxD1 *rxdp1;
+ struct RxD3 *rxdp3;
get_info = ring_data->rx_curr_get_info;
get_block = get_info.block_index;
@@ -2990,41 +2984,41 @@
if ((get_block == put_block) &&
(get_info.offset + 1) == put_info.offset) {
DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
- ring_data->dev->name);
+ ring_data->dev->name);
break;
}
- skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
+ skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
+ DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",
ring_data->dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
return 0;
}
if (ring_data->rxd_mode == RXD_MODE_1) {
- rxdp1 = (struct RxD1*)rxdp;
+ rxdp1 = (struct RxD1 *)rxdp;
pci_unmap_single(ring_data->pdev, (dma_addr_t)
- rxdp1->Buffer0_ptr,
- ring_data->mtu +
- HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
+ rxdp1->Buffer0_ptr,
+ ring_data->mtu +
+ HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE +
+ HEADER_SNAP_SIZE,
+ PCI_DMA_FROMDEVICE);
} else if (ring_data->rxd_mode == RXD_MODE_3B) {
- rxdp3 = (struct RxD3*)rxdp;
- pci_dma_sync_single_for_cpu(ring_data->pdev, (dma_addr_t)
- rxdp3->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(ring_data->pdev, (dma_addr_t)
- rxdp3->Buffer2_ptr,
- ring_data->mtu + 4,
- PCI_DMA_FROMDEVICE);
+ rxdp3 = (struct RxD3 *)rxdp;
+ pci_dma_sync_single_for_cpu(ring_data->pdev,
+ (dma_addr_t)rxdp3->Buffer0_ptr,
+ BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(ring_data->pdev,
+ (dma_addr_t)rxdp3->Buffer2_ptr,
+ ring_data->mtu + 4,
+ PCI_DMA_FROMDEVICE);
}
prefetch(skb->data);
rx_osm_handler(ring_data, rxdp);
get_info.offset++;
ring_data->rx_curr_get_info.offset = get_info.offset;
rxdp = ring_data->rx_blocks[get_block].
- rxds[get_info.offset].virt_addr;
+ rxds[get_info.offset].virt_addr;
if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
get_info.offset = 0;
ring_data->rx_curr_get_info.offset = get_info.offset;
@@ -3047,7 +3041,7 @@
}
if (ring_data->lro) {
/* Clear all LRO sessions before exiting */
- for (i=0; i<MAX_LRO_SESSIONS; i++) {
+ for (i = 0; i < MAX_LRO_SESSIONS; i++) {
struct lro *lro = &ring_data->lro0_n[i];
if (lro->in_use) {
update_L3L4_header(ring_data->nic, lro);
@@ -3056,7 +3050,7 @@
}
}
}
- return(napi_pkts);
+ return napi_pkts;
}
/**
@@ -3080,14 +3074,16 @@
int pkt_cnt = 0;
unsigned long flags = 0;
u8 err_mask;
+ struct stat_block *stats = nic->mac_control.stats_info;
+ struct swStat *swstats = &stats->sw_stat;
if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
- return;
+ return;
get_info = fifo_data->tx_curr_get_info;
memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
- txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
- list_virt_addr;
+ txdlp = (struct TxD *)
+ fifo_data->list_info[get_info.offset].list_virt_addr;
while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
(get_info.offset != put_info.offset) &&
(txdlp->Host_Control)) {
@@ -3096,62 +3092,54 @@
unsigned long long err;
err = txdlp->Control_1 & TXD_T_CODE;
if (err & 0x1) {
- nic->mac_control.stats_info->sw_stat.
- parity_err_cnt++;
+ swstats->parity_err_cnt++;
}
/* update t_code statistics */
err_mask = err >> 48;
- switch(err_mask) {
- case 2:
- nic->mac_control.stats_info->sw_stat.
- tx_buf_abort_cnt++;
+ switch (err_mask) {
+ case 2:
+ swstats->tx_buf_abort_cnt++;
break;
- case 3:
- nic->mac_control.stats_info->sw_stat.
- tx_desc_abort_cnt++;
+ case 3:
+ swstats->tx_desc_abort_cnt++;
break;
- case 7:
- nic->mac_control.stats_info->sw_stat.
- tx_parity_err_cnt++;
+ case 7:
+ swstats->tx_parity_err_cnt++;
break;
- case 10:
- nic->mac_control.stats_info->sw_stat.
- tx_link_loss_cnt++;
+ case 10:
+ swstats->tx_link_loss_cnt++;
break;
- case 15:
- nic->mac_control.stats_info->sw_stat.
- tx_list_proc_err_cnt++;
+ case 15:
+ swstats->tx_list_proc_err_cnt++;
break;
- }
+ }
}
skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
if (skb == NULL) {
spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
- DBG_PRINT(ERR_DBG, "%s: Null skb ",
- __func__);
- DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
+ DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",
+ __func__);
return;
}
pkt_cnt++;
/* Updating the statistics block */
nic->dev->stats.tx_bytes += skb->len;
- nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
+ swstats->mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
get_info.offset++;
if (get_info.offset == get_info.fifo_len + 1)
get_info.offset = 0;
- txdlp = (struct TxD *) fifo_data->list_info
- [get_info.offset].list_virt_addr;
- fifo_data->tx_curr_get_info.offset =
- get_info.offset;
+ txdlp = (struct TxD *)
+ fifo_data->list_info[get_info.offset].list_virt_addr;
+ fifo_data->tx_curr_get_info.offset = get_info.offset;
}
s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
@@ -3169,43 +3157,41 @@
* This function is used to write values to the MDIO registers
* NONE
*/
-static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
+static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value,
+ struct net_device *dev)
{
- u64 val64 = 0x0;
+ u64 val64;
struct s2io_nic *sp = netdev_priv(dev);
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- //address transaction
- val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
- | MDIO_MMD_DEV_ADDR(mmd_type)
- | MDIO_MMS_PRT_ADDR(0x0);
+ /* address transaction */
+ val64 = MDIO_MMD_INDX_ADDR(addr) |
+ MDIO_MMD_DEV_ADDR(mmd_type) |
+ MDIO_MMS_PRT_ADDR(0x0);
writeq(val64, &bar0->mdio_control);
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
writeq(val64, &bar0->mdio_control);
udelay(100);
- //Data transaction
- val64 = 0x0;
- val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
- | MDIO_MMD_DEV_ADDR(mmd_type)
- | MDIO_MMS_PRT_ADDR(0x0)
- | MDIO_MDIO_DATA(value)
- | MDIO_OP(MDIO_OP_WRITE_TRANS);
+ /* Data transaction */
+ val64 = MDIO_MMD_INDX_ADDR(addr) |
+ MDIO_MMD_DEV_ADDR(mmd_type) |
+ MDIO_MMS_PRT_ADDR(0x0) |
+ MDIO_MDIO_DATA(value) |
+ MDIO_OP(MDIO_OP_WRITE_TRANS);
writeq(val64, &bar0->mdio_control);
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
writeq(val64, &bar0->mdio_control);
udelay(100);
- val64 = 0x0;
- val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
- | MDIO_MMD_DEV_ADDR(mmd_type)
- | MDIO_MMS_PRT_ADDR(0x0)
- | MDIO_OP(MDIO_OP_READ_TRANS);
+ val64 = MDIO_MMD_INDX_ADDR(addr) |
+ MDIO_MMD_DEV_ADDR(mmd_type) |
+ MDIO_MMS_PRT_ADDR(0x0) |
+ MDIO_OP(MDIO_OP_READ_TRANS);
writeq(val64, &bar0->mdio_control);
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
writeq(val64, &bar0->mdio_control);
udelay(100);
-
}
/**
@@ -3225,20 +3211,19 @@
struct XENA_dev_config __iomem *bar0 = sp->bar0;
/* address transaction */
- val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
- | MDIO_MMD_DEV_ADDR(mmd_type)
- | MDIO_MMS_PRT_ADDR(0x0);
+ val64 = val64 | (MDIO_MMD_INDX_ADDR(addr)
+ | MDIO_MMD_DEV_ADDR(mmd_type)
+ | MDIO_MMS_PRT_ADDR(0x0));
writeq(val64, &bar0->mdio_control);
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
writeq(val64, &bar0->mdio_control);
udelay(100);
/* Data transaction */
- val64 = 0x0;
- val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
- | MDIO_MMD_DEV_ADDR(mmd_type)
- | MDIO_MMS_PRT_ADDR(0x0)
- | MDIO_OP(MDIO_OP_READ_TRANS);
+ val64 = MDIO_MMD_INDX_ADDR(addr) |
+ MDIO_MMD_DEV_ADDR(mmd_type) |
+ MDIO_MMS_PRT_ADDR(0x0) |
+ MDIO_OP(MDIO_OP_READ_TRANS);
writeq(val64, &bar0->mdio_control);
val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
writeq(val64, &bar0->mdio_control);
@@ -3250,6 +3235,7 @@
rval64 = rval64 >> 16;
return rval64;
}
+
/**
* s2io_chk_xpak_counter - Function to check the status of the xpak counters
* @counter : couter value to be updated
@@ -3260,45 +3246,43 @@
* NONE
*/
-static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, u16 flag, u16 type)
+static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index,
+ u16 flag, u16 type)
{
u64 mask = 0x3;
u64 val64;
int i;
- for(i = 0; i <index; i++)
+ for (i = 0; i < index; i++)
mask = mask << 0x2;
- if(flag > 0)
- {
+ if (flag > 0) {
*counter = *counter + 1;
val64 = *regs_stat & mask;
val64 = val64 >> (index * 0x2);
val64 = val64 + 1;
- if(val64 == 3)
- {
- switch(type)
- {
+ if (val64 == 3) {
+ switch (type) {
case 1:
- DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
- "service. Excessive temperatures may "
- "result in premature transceiver "
- "failure \n");
- break;
+ DBG_PRINT(ERR_DBG,
+ "Take Xframe NIC out of service.\n");
+ DBG_PRINT(ERR_DBG,
+"Excessive temperatures may result in premature transceiver failure.\n");
+ break;
case 2:
- DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
- "service Excessive bias currents may "
- "indicate imminent laser diode "
- "failure \n");
- break;
+ DBG_PRINT(ERR_DBG,
+ "Take Xframe NIC out of service.\n");
+ DBG_PRINT(ERR_DBG,
+"Excessive bias currents may indicate imminent laser diode failure.\n");
+ break;
case 3:
- DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
- "service Excessive laser output "
- "power may saturate far-end "
- "receiver\n");
- break;
+ DBG_PRINT(ERR_DBG,
+ "Take Xframe NIC out of service.\n");
+ DBG_PRINT(ERR_DBG,
+"Excessive laser output power may saturate far-end receiver.\n");
+ break;
default:
- DBG_PRINT(ERR_DBG, "Incorrect XPAK Alarm "
- "type \n");
+ DBG_PRINT(ERR_DBG,
+ "Incorrect XPAK Alarm type\n");
}
val64 = 0x0;
}
@@ -3326,24 +3310,24 @@
u64 addr = 0x0;
struct s2io_nic *sp = netdev_priv(dev);
- struct stat_block *stat_info = sp->mac_control.stats_info;
+ struct stat_block *stats = sp->mac_control.stats_info;
+ struct xpakStat *xstats = &stats->xpak_stat;
/* Check the communication with the MDIO slave */
addr = MDIO_CTRL1;
val64 = 0x0;
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
- if((val64 == 0xFFFF) || (val64 == 0x0000))
- {
- DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
- "Returned %llx\n", (unsigned long long)val64);
+ if ((val64 == 0xFFFF) || (val64 == 0x0000)) {
+ DBG_PRINT(ERR_DBG,
+ "ERR: MDIO slave access failed - Returned %llx\n",
+ (unsigned long long)val64);
return;
}
/* Check for the expected value of control reg 1 */
- if(val64 != MDIO_CTRL1_SPEED10G)
- {
- DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
- DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n",
+ if (val64 != MDIO_CTRL1_SPEED10G) {
+ DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "
+ "Returned: %llx- Expected: 0x%x\n",
(unsigned long long)val64, MDIO_CTRL1_SPEED10G);
return;
}
@@ -3360,53 +3344,53 @@
flag = CHECKBIT(val64, 0x7);
type = 1;
- s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_transceiver_temp_high,
- &stat_info->xpak_stat.xpak_regs_stat,
- 0x0, flag, type);
+ s2io_chk_xpak_counter(&xstats->alarm_transceiver_temp_high,
+ &xstats->xpak_regs_stat,
+ 0x0, flag, type);
- if(CHECKBIT(val64, 0x6))
- stat_info->xpak_stat.alarm_transceiver_temp_low++;
+ if (CHECKBIT(val64, 0x6))
+ xstats->alarm_transceiver_temp_low++;
flag = CHECKBIT(val64, 0x3);
type = 2;
- s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_bias_current_high,
- &stat_info->xpak_stat.xpak_regs_stat,
- 0x2, flag, type);
+ s2io_chk_xpak_counter(&xstats->alarm_laser_bias_current_high,
+ &xstats->xpak_regs_stat,
+ 0x2, flag, type);
- if(CHECKBIT(val64, 0x2))
- stat_info->xpak_stat.alarm_laser_bias_current_low++;
+ if (CHECKBIT(val64, 0x2))
+ xstats->alarm_laser_bias_current_low++;
flag = CHECKBIT(val64, 0x1);
type = 3;
- s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_output_power_high,
- &stat_info->xpak_stat.xpak_regs_stat,
- 0x4, flag, type);
+ s2io_chk_xpak_counter(&xstats->alarm_laser_output_power_high,
+ &xstats->xpak_regs_stat,
+ 0x4, flag, type);
- if(CHECKBIT(val64, 0x0))
- stat_info->xpak_stat.alarm_laser_output_power_low++;
+ if (CHECKBIT(val64, 0x0))
+ xstats->alarm_laser_output_power_low++;
/* Reading the Warning flags */
addr = 0xA074;
val64 = 0x0;
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
- if(CHECKBIT(val64, 0x7))
- stat_info->xpak_stat.warn_transceiver_temp_high++;
+ if (CHECKBIT(val64, 0x7))
+ xstats->warn_transceiver_temp_high++;
- if(CHECKBIT(val64, 0x6))
- stat_info->xpak_stat.warn_transceiver_temp_low++;
+ if (CHECKBIT(val64, 0x6))
+ xstats->warn_transceiver_temp_low++;
- if(CHECKBIT(val64, 0x3))
- stat_info->xpak_stat.warn_laser_bias_current_high++;
+ if (CHECKBIT(val64, 0x3))
+ xstats->warn_laser_bias_current_high++;
- if(CHECKBIT(val64, 0x2))
- stat_info->xpak_stat.warn_laser_bias_current_low++;
+ if (CHECKBIT(val64, 0x2))
+ xstats->warn_laser_bias_current_low++;
- if(CHECKBIT(val64, 0x1))
- stat_info->xpak_stat.warn_laser_output_power_high++;
+ if (CHECKBIT(val64, 0x1))
+ xstats->warn_laser_output_power_high++;
- if(CHECKBIT(val64, 0x0))
- stat_info->xpak_stat.warn_laser_output_power_low++;
+ if (CHECKBIT(val64, 0x0))
+ xstats->warn_laser_output_power_low++;
}
/**
@@ -3421,7 +3405,7 @@
*/
static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
- int bit_state)
+ int bit_state)
{
int ret = FAILURE, cnt = 0, delay = 1;
u64 val64;
@@ -3443,7 +3427,7 @@
}
}
- if(in_interrupt())
+ if (in_interrupt())
mdelay(delay);
else
msleep(delay);
@@ -3483,7 +3467,7 @@
* void.
*/
-static void s2io_reset(struct s2io_nic * sp)
+static void s2io_reset(struct s2io_nic *sp)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
@@ -3492,18 +3476,19 @@
u16 val16;
unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
+ struct stat_block *stats;
+ struct swStat *swstats;
- DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
- __func__, sp->dev->name);
+ DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
+ __func__, sp->dev->name);
/* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
val64 = SW_RESET_ALL;
writeq(val64, &bar0->sw_reset);
- if (strstr(sp->product_name, "CX4")) {
+ if (strstr(sp->product_name, "CX4"))
msleep(750);
- }
msleep(250);
for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
@@ -3515,9 +3500,8 @@
msleep(200);
}
- if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
- DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __func__);
- }
+ if (check_pci_device_id(val16) == (u16)PCI_ANY_ID)
+ DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
@@ -3545,27 +3529,32 @@
}
/* Reset device statistics maintained by OS */
- memset(&sp->stats, 0, sizeof (struct net_device_stats));
+ memset(&sp->stats, 0, sizeof(struct net_device_stats));
- up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
- down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
- up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
- down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
- reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
- mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
- mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
- watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
+ stats = sp->mac_control.stats_info;
+ swstats = &stats->sw_stat;
+
/* save link up/down time/cnt, reset/memory/watchdog cnt */
- memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
+ up_cnt = swstats->link_up_cnt;
+ down_cnt = swstats->link_down_cnt;
+ up_time = swstats->link_up_time;
+ down_time = swstats->link_down_time;
+ reset_cnt = swstats->soft_reset_cnt;
+ mem_alloc_cnt = swstats->mem_allocated;
+ mem_free_cnt = swstats->mem_freed;
+ watchdog_cnt = swstats->watchdog_timer_cnt;
+
+ memset(stats, 0, sizeof(struct stat_block));
+
/* restore link up/down time/cnt, reset/memory/watchdog cnt */
- sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
- sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
- sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
- sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
- sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
- sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
- sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
- sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
+ swstats->link_up_cnt = up_cnt;
+ swstats->link_down_cnt = down_cnt;
+ swstats->link_up_time = up_time;
+ swstats->link_down_time = down_time;
+ swstats->soft_reset_cnt = reset_cnt;
+ swstats->mem_allocated = mem_alloc_cnt;
+ swstats->mem_freed = mem_free_cnt;
+ swstats->watchdog_timer_cnt = watchdog_cnt;
/* SXE-002: Configure link and activity LED to turn it off */
subid = sp->pdev->subsystem_device;
@@ -3600,7 +3589,7 @@
* SUCCESS on success and FAILURE on failure.
*/
-static int s2io_set_swapper(struct s2io_nic * sp)
+static int s2io_set_swapper(struct s2io_nic *sp)
{
struct net_device *dev = sp->dev;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -3619,7 +3608,7 @@
0x4200004242000042ULL, /* FE=0, SE=1 */
0}; /* FE=0, SE=0 */
- while(i<4) {
+ while (i < 4) {
writeq(value[i], &bar0->swapper_ctrl);
val64 = readq(&bar0->pif_rd_swapper_fb);
if (val64 == 0x0123456789ABCDEFULL)
@@ -3627,10 +3616,9 @@
i++;
}
if (i == 4) {
- DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
- dev->name);
- DBG_PRINT(ERR_DBG, "feedback read %llx\n",
- (unsigned long long) val64);
+ DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "
+ "feedback read %llx\n",
+ dev->name, (unsigned long long)val64);
return FAILURE;
}
valr = value[i];
@@ -3642,46 +3630,47 @@
writeq(valt, &bar0->xmsi_address);
val64 = readq(&bar0->xmsi_address);
- if(val64 != valt) {
+ if (val64 != valt) {
int i = 0;
u64 value[] = { 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */
0x0081810000818100ULL, /* FE=1, SE=0 */
0x0042420000424200ULL, /* FE=0, SE=1 */
0}; /* FE=0, SE=0 */
- while(i<4) {
+ while (i < 4) {
writeq((value[i] | valr), &bar0->swapper_ctrl);
writeq(valt, &bar0->xmsi_address);
val64 = readq(&bar0->xmsi_address);
- if(val64 == valt)
+ if (val64 == valt)
break;
i++;
}
- if(i == 4) {
+ if (i == 4) {
unsigned long long x = val64;
- DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
- DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
+ DBG_PRINT(ERR_DBG,
+ "Write failed, Xmsi_addr reads:0x%llx\n", x);
return FAILURE;
}
}
val64 = readq(&bar0->swapper_ctrl);
val64 &= 0xFFFF000000000000ULL;
-#ifdef __BIG_ENDIAN
+#ifdef __BIG_ENDIAN
/*
* The device by default set to a big endian format, so a
* big endian driver need not set anything.
*/
val64 |= (SWAPPER_CTRL_TXP_FE |
- SWAPPER_CTRL_TXP_SE |
- SWAPPER_CTRL_TXD_R_FE |
- SWAPPER_CTRL_TXD_W_FE |
- SWAPPER_CTRL_TXF_R_FE |
- SWAPPER_CTRL_RXD_R_FE |
- SWAPPER_CTRL_RXD_W_FE |
- SWAPPER_CTRL_RXF_W_FE |
- SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ SWAPPER_CTRL_TXP_SE |
+ SWAPPER_CTRL_TXD_R_FE |
+ SWAPPER_CTRL_TXD_W_FE |
+ SWAPPER_CTRL_TXF_R_FE |
+ SWAPPER_CTRL_RXD_R_FE |
+ SWAPPER_CTRL_RXD_W_FE |
+ SWAPPER_CTRL_RXF_W_FE |
+ SWAPPER_CTRL_XMSI_FE |
+ SWAPPER_CTRL_STATS_FE |
+ SWAPPER_CTRL_STATS_SE);
if (sp->config.intr_type == INTA)
val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
@@ -3692,19 +3681,20 @@
* we want to set.
*/
val64 |= (SWAPPER_CTRL_TXP_FE |
- SWAPPER_CTRL_TXP_SE |
- SWAPPER_CTRL_TXD_R_FE |
- SWAPPER_CTRL_TXD_R_SE |
- SWAPPER_CTRL_TXD_W_FE |
- SWAPPER_CTRL_TXD_W_SE |
- SWAPPER_CTRL_TXF_R_FE |
- SWAPPER_CTRL_RXD_R_FE |
- SWAPPER_CTRL_RXD_R_SE |
- SWAPPER_CTRL_RXD_W_FE |
- SWAPPER_CTRL_RXD_W_SE |
- SWAPPER_CTRL_RXF_W_FE |
- SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ SWAPPER_CTRL_TXP_SE |
+ SWAPPER_CTRL_TXD_R_FE |
+ SWAPPER_CTRL_TXD_R_SE |
+ SWAPPER_CTRL_TXD_W_FE |
+ SWAPPER_CTRL_TXD_W_SE |
+ SWAPPER_CTRL_TXF_R_FE |
+ SWAPPER_CTRL_RXD_R_FE |
+ SWAPPER_CTRL_RXD_R_SE |
+ SWAPPER_CTRL_RXD_W_FE |
+ SWAPPER_CTRL_RXD_W_SE |
+ SWAPPER_CTRL_RXF_W_FE |
+ SWAPPER_CTRL_XMSI_FE |
+ SWAPPER_CTRL_STATS_FE |
+ SWAPPER_CTRL_STATS_SE);
if (sp->config.intr_type == INTA)
val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
@@ -3718,10 +3708,9 @@
val64 = readq(&bar0->pif_rd_swapper_fb);
if (val64 != 0x0123456789ABCDEFULL) {
/* Endian settings are incorrect, calls for another dekko. */
- DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
- dev->name);
- DBG_PRINT(ERR_DBG, "feedback read %llx\n",
- (unsigned long long) val64);
+ DBG_PRINT(ERR_DBG,
+ "%s: Endian settings are wrong, feedback read %llx\n",
+ dev->name, (unsigned long long)val64);
return FAILURE;
}
@@ -3740,7 +3729,7 @@
break;
mdelay(1);
cnt++;
- } while(cnt < 5);
+ } while (cnt < 5);
if (cnt == 5) {
DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
ret = 1;
@@ -3755,18 +3744,18 @@
u64 val64;
int i, msix_index;
-
if (nic->device_type == XFRAME_I_DEVICE)
return;
- for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
- msix_index = (i) ? ((i-1) * 8 + 1): 0;
+ for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+ msix_index = (i) ? ((i-1) * 8 + 1) : 0;
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, msix_index)) {
- DBG_PRINT(ERR_DBG, "failed in %s\n", __func__);
+ DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
+ __func__, msix_index);
continue;
}
}
@@ -3782,12 +3771,13 @@
return;
/* Store and display */
- for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
- msix_index = (i) ? ((i-1) * 8 + 1): 0;
+ for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+ msix_index = (i) ? ((i-1) * 8 + 1) : 0;
val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, msix_index)) {
- DBG_PRINT(ERR_DBG, "failed in %s\n", __func__);
+ DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
+ __func__, msix_index);
continue;
}
addr = readq(&bar0->xmsi_address);
@@ -3805,36 +3795,32 @@
u64 rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
+ int size;
+ struct stat_block *stats = nic->mac_control.stats_info;
+ struct swStat *swstats = &stats->sw_stat;
- nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
- GFP_KERNEL);
+ size = nic->num_entries * sizeof(struct msix_entry);
+ nic->entries = kzalloc(size, GFP_KERNEL);
if (!nic->entries) {
- DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
- __func__);
- nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
+ __func__);
+ swstats->mem_alloc_fail_cnt++;
return -ENOMEM;
}
- nic->mac_control.stats_info->sw_stat.mem_allocated
- += (nic->num_entries * sizeof(struct msix_entry));
+ swstats->mem_allocated += size;
- memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
-
- nic->s2io_entries =
- kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
- GFP_KERNEL);
+ size = nic->num_entries * sizeof(struct s2io_msix_entry);
+ nic->s2io_entries = kzalloc(size, GFP_KERNEL);
if (!nic->s2io_entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
- __func__);
- nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
+ __func__);
+ swstats->mem_alloc_fail_cnt++;
kfree(nic->entries);
- nic->mac_control.stats_info->sw_stat.mem_freed
+ swstats->mem_freed
+= (nic->num_entries * sizeof(struct msix_entry));
return -ENOMEM;
}
- nic->mac_control.stats_info->sw_stat.mem_allocated
- += (nic->num_entries * sizeof(struct s2io_msix_entry));
- memset(nic->s2io_entries, 0,
- nic->num_entries * sizeof(struct s2io_msix_entry));
+ swstats->mem_allocated += size;
nic->entries[0].entry = 0;
nic->s2io_entries[0].entry = 0;
@@ -3863,13 +3849,13 @@
ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
if (ret) {
- DBG_PRINT(ERR_DBG, "s2io: Enabling MSI-X failed\n");
+ DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
kfree(nic->entries);
- nic->mac_control.stats_info->sw_stat.mem_freed
- += (nic->num_entries * sizeof(struct msix_entry));
+ swstats->mem_freed += nic->num_entries *
+ sizeof(struct msix_entry);
kfree(nic->s2io_entries);
- nic->mac_control.stats_info->sw_stat.mem_freed
- += (nic->num_entries * sizeof(struct s2io_msix_entry));
+ swstats->mem_freed += nic->num_entries *
+ sizeof(struct s2io_msix_entry);
nic->entries = NULL;
nic->s2io_entries = NULL;
return -ENOMEM;
@@ -3906,14 +3892,14 @@
u64 val64, saved64;
err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
- sp->name, sp);
+ sp->name, sp);
if (err) {
DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
- sp->dev->name, pci_name(pdev), pdev->irq);
+ sp->dev->name, pci_name(pdev), pdev->irq);
return err;
}
- init_waitqueue_head (&sp->msi_wait);
+ init_waitqueue_head(&sp->msi_wait);
sp->msi_detected = 0;
saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
@@ -3927,8 +3913,8 @@
if (!sp->msi_detected) {
/* MSI(X) test failed, go back to INTx mode */
DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
- "using MSI(X) during test\n", sp->dev->name,
- pci_name(pdev));
+ "using MSI(X) during test\n",
+ sp->dev->name, pci_name(pdev));
err = -EOPNOTSUPP;
}
@@ -3946,8 +3932,7 @@
u16 msi_control;
for (i = 0; i < sp->num_entries; i++) {
- if (sp->s2io_entries[i].in_use ==
- MSIX_REGISTERED_SUCCESS) {
+ if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) {
int vector = sp->entries[i].vector;
void *arg = sp->s2io_entries[i].arg;
free_irq(vector, arg);
@@ -3992,6 +3977,7 @@
static int s2io_open(struct net_device *dev)
{
struct s2io_nic *sp = netdev_priv(dev);
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
int err = 0;
/*
@@ -4022,13 +4008,13 @@
if (sp->config.intr_type == MSI_X) {
if (sp->entries) {
kfree(sp->entries);
- sp->mac_control.stats_info->sw_stat.mem_freed
- += (sp->num_entries * sizeof(struct msix_entry));
+ swstats->mem_freed += sp->num_entries *
+ sizeof(struct msix_entry);
}
if (sp->s2io_entries) {
kfree(sp->s2io_entries);
- sp->mac_control.stats_info->sw_stat.mem_freed
- += (sp->num_entries * sizeof(struct s2io_msix_entry));
+ swstats->mem_freed += sp->num_entries *
+ sizeof(struct s2io_msix_entry);
}
}
return err;
@@ -4055,8 +4041,8 @@
int offset;
/* Return if the device is already closed *
- * Can happen when s2io_card_up failed in change_mtu *
- */
+ * Can happen when s2io_card_up failed in change_mtu *
+ */
if (!is_s2io_card_up(sp))
return 0;
@@ -4086,7 +4072,7 @@
* 0 on success & 1 on failure.
*/
-static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct s2io_nic *sp = netdev_priv(dev);
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -4096,29 +4082,27 @@
unsigned long flags = 0;
u16 vlan_tag = 0;
struct fifo_info *fifo = NULL;
- struct mac_info *mac_control;
- struct config_param *config;
int do_spin_lock = 1;
int offload_type;
int enable_per_list_interrupt = 0;
- struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
-
- mac_control = &sp->mac_control;
- config = &sp->config;
+ struct config_param *config = &sp->config;
+ struct mac_info *mac_control = &sp->mac_control;
+ struct stat_block *stats = mac_control->stats_info;
+ struct swStat *swstats = &stats->sw_stat;
DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
if (unlikely(skb->len <= 0)) {
- DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+ DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name);
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (!is_s2io_card_up(sp)) {
DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
dev->name);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
queue = 0;
@@ -4132,20 +4116,20 @@
if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
th = (struct tcphdr *)(((unsigned char *)ip) +
- ip->ihl*4);
+ ip->ihl*4);
if (ip->protocol == IPPROTO_TCP) {
queue_len = sp->total_tcp_fifos;
queue = (ntohs(th->source) +
- ntohs(th->dest)) &
- sp->fifo_selector[queue_len - 1];
+ ntohs(th->dest)) &
+ sp->fifo_selector[queue_len - 1];
if (queue >= queue_len)
queue = queue_len - 1;
} else if (ip->protocol == IPPROTO_UDP) {
queue_len = sp->total_udp_fifos;
queue = (ntohs(th->source) +
- ntohs(th->dest)) &
- sp->fifo_selector[queue_len - 1];
+ ntohs(th->dest)) &
+ sp->fifo_selector[queue_len - 1];
if (queue >= queue_len)
queue = queue_len - 1;
queue += sp->udp_fifo_idx;
@@ -4158,7 +4142,7 @@
} else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
/* get fifo number based on skb->priority value */
queue = config->fifo_mapping
- [skb->priority & (MAX_TX_FIFOS - 1)];
+ [skb->priority & (MAX_TX_FIFOS - 1)];
fifo = &mac_control->fifos[queue];
if (do_spin_lock)
@@ -4180,19 +4164,19 @@
}
}
- put_off = (u16) fifo->tx_curr_put_info.offset;
- get_off = (u16) fifo->tx_curr_get_info.offset;
- txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr;
+ put_off = (u16)fifo->tx_curr_put_info.offset;
+ get_off = (u16)fifo->tx_curr_get_info.offset;
+ txdp = (struct TxD *)fifo->list_info[put_off].list_virt_addr;
queue_len = fifo->tx_curr_put_info.fifo_len + 1;
/* Avoid "put" pointer going beyond "get" pointer */
if (txdp->Host_Control ||
- ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
+ ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
s2io_stop_tx_queue(sp, fifo->fifo_no);
dev_kfree_skb(skb);
spin_unlock_irqrestore(&fifo->tx_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
offload_type = s2io_offload_type(skb);
@@ -4201,9 +4185,9 @@
txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
}
if (skb->ip_summed == CHECKSUM_PARTIAL) {
- txdp->Control_2 |=
- (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
- TXD_TX_CKO_UDP_EN);
+ txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN |
+ TXD_TX_CKO_TCP_EN |
+ TXD_TX_CKO_UDP_EN);
}
txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
txdp->Control_1 |= TXD_LIST_OWN_XENA;
@@ -4228,26 +4212,27 @@
#ifdef __BIG_ENDIAN
/* both variants do cpu_to_be64(be32_to_cpu(...)) */
fifo->ufo_in_band_v[put_off] =
- (__force u64)skb_shinfo(skb)->ip6_frag_id;
+ (__force u64)skb_shinfo(skb)->ip6_frag_id;
#else
fifo->ufo_in_band_v[put_off] =
- (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
+ (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
#endif
txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
txdp->Buffer_Pointer = pci_map_single(sp->pdev,
- fifo->ufo_in_band_v,
- sizeof(u64), PCI_DMA_TODEVICE);
+ fifo->ufo_in_band_v,
+ sizeof(u64),
+ PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
goto pci_map_failed;
txdp++;
}
- txdp->Buffer_Pointer = pci_map_single
- (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
+ txdp->Buffer_Pointer = pci_map_single(sp->pdev, skb->data,
+ frg_len, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
goto pci_map_failed;
- txdp->Host_Control = (unsigned long) skb;
+ txdp->Host_Control = (unsigned long)skb;
txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
if (offload_type == SKB_GSO_UDP)
txdp->Control_1 |= TXD_UFO_EN;
@@ -4260,9 +4245,10 @@
if (!frag->size)
continue;
txdp++;
- txdp->Buffer_Pointer = (u64) pci_map_page
- (sp->pdev, frag->page, frag->page_offset,
- frag->size, PCI_DMA_TODEVICE);
+ txdp->Buffer_Pointer = (u64)pci_map_page(sp->pdev, frag->page,
+ frag->page_offset,
+ frag->size,
+ PCI_DMA_TODEVICE);
txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
if (offload_type == SKB_GSO_UDP)
txdp->Control_1 |= TXD_UFO_EN;
@@ -4292,26 +4278,27 @@
/* Avoid "put" pointer going beyond "get" pointer */
if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
- sp->mac_control.stats_info->sw_stat.fifo_full_cnt++;
+ swstats->fifo_full_cnt++;
DBG_PRINT(TX_DBG,
"No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
put_off, get_off);
s2io_stop_tx_queue(sp, fifo->fifo_no);
}
- mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
+ swstats->mem_allocated += skb->truesize;
spin_unlock_irqrestore(&fifo->tx_lock, flags);
if (sp->config.intr_type == MSI_X)
tx_intr_handler(fifo);
- return 0;
+ return NETDEV_TX_OK;
+
pci_map_failed:
- stats->pci_map_fail_cnt++;
+ swstats->pci_map_fail_cnt++;
s2io_stop_tx_queue(sp, fifo->fifo_no);
- stats->mem_freed += skb->truesize;
+ swstats->mem_freed += skb->truesize;
dev_kfree_skb(skb);
spin_unlock_irqrestore(&fifo->tx_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static void
@@ -4402,17 +4389,16 @@
* This is unstable state so clear both up/down
* interrupt and adapter to re-evaluate the link state.
*/
- val64 |= GPIO_INT_REG_LINK_DOWN;
+ val64 |= GPIO_INT_REG_LINK_DOWN;
val64 |= GPIO_INT_REG_LINK_UP;
writeq(val64, &bar0->gpio_int_reg);
val64 = readq(&bar0->gpio_int_mask);
val64 &= ~(GPIO_INT_MASK_LINK_UP |
GPIO_INT_MASK_LINK_DOWN);
writeq(val64, &bar0->gpio_int_mask);
- }
- else if (val64 & GPIO_INT_REG_LINK_UP) {
+ } else if (val64 & GPIO_INT_REG_LINK_UP) {
val64 = readq(&bar0->adapter_status);
- /* Enable Adapter */
+ /* Enable Adapter */
val64 = readq(&bar0->adapter_control);
val64 |= ADAPTER_CNTL_EN;
writeq(val64, &bar0->adapter_control);
@@ -4431,7 +4417,7 @@
val64 |= GPIO_INT_MASK_LINK_UP;
writeq(val64, &bar0->gpio_int_mask);
- }else if (val64 & GPIO_INT_REG_LINK_DOWN) {
+ } else if (val64 & GPIO_INT_REG_LINK_DOWN) {
val64 = readq(&bar0->adapter_status);
s2io_link(sp, LINK_DOWN);
/* Link is down so unmaks link up interrupt */
@@ -4442,7 +4428,7 @@
/* turn off LED */
val64 = readq(&bar0->adapter_control);
- val64 = val64 &(~ADAPTER_LED_ON);
+ val64 = val64 & (~ADAPTER_LED_ON);
writeq(val64, &bar0->adapter_control);
}
}
@@ -4459,12 +4445,12 @@
* 1 - if alarm bit set
* 0 - if alarm bit is not set
*/
-static int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
- unsigned long long *cnt)
+static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr,
+ unsigned long long *cnt)
{
u64 val64;
val64 = readq(addr);
- if ( val64 & value ) {
+ if (val64 & value) {
writeq(val64, addr);
(*cnt)++;
return 1;
@@ -4481,12 +4467,12 @@
* Return Value:
* NONE
*/
-static void s2io_handle_errors(void * dev_id)
+static void s2io_handle_errors(void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
+ struct net_device *dev = (struct net_device *)dev_id;
struct s2io_nic *sp = netdev_priv(dev);
struct XENA_dev_config __iomem *bar0 = sp->bar0;
- u64 temp64 = 0,val64=0;
+ u64 temp64 = 0, val64 = 0;
int i = 0;
struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
@@ -4499,10 +4485,10 @@
return;
memset(&sw_stat->ring_full_cnt, 0,
- sizeof(sw_stat->ring_full_cnt));
+ sizeof(sw_stat->ring_full_cnt));
/* Handling the XPAK counters update */
- if(stats->xpak_timer_count < 72000) {
+ if (stats->xpak_timer_count < 72000) {
/* waiting for an hour */
stats->xpak_timer_count++;
} else {
@@ -4521,191 +4507,227 @@
/* In case of a serious error, the device will be Reset. */
if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
- &sw_stat->serious_err_cnt))
+ &sw_stat->serious_err_cnt))
goto reset;
/* Check for data parity error */
if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
- &sw_stat->parity_err_cnt))
+ &sw_stat->parity_err_cnt))
goto reset;
/* Check for ring full counter */
if (sp->device_type == XFRAME_II_DEVICE) {
val64 = readq(&bar0->ring_bump_counter1);
- for (i=0; i<4; i++) {
- temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
+ for (i = 0; i < 4; i++) {
+ temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
temp64 >>= 64 - ((i+1)*16);
sw_stat->ring_full_cnt[i] += temp64;
}
val64 = readq(&bar0->ring_bump_counter2);
- for (i=0; i<4; i++) {
- temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
+ for (i = 0; i < 4; i++) {
+ temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
temp64 >>= 64 - ((i+1)*16);
- sw_stat->ring_full_cnt[i+4] += temp64;
+ sw_stat->ring_full_cnt[i+4] += temp64;
}
}
val64 = readq(&bar0->txdma_int_status);
/*check for pfc_err*/
if (val64 & TXDMA_PFC_INT) {
- if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM|
- PFC_MISC_0_ERR | PFC_MISC_1_ERR|
- PFC_PCIX_ERR, &bar0->pfc_err_reg,
- &sw_stat->pfc_err_cnt))
+ if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
+ PFC_MISC_0_ERR | PFC_MISC_1_ERR |
+ PFC_PCIX_ERR,
+ &bar0->pfc_err_reg,
+ &sw_stat->pfc_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, &bar0->pfc_err_reg,
- &sw_stat->pfc_err_cnt);
+ do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR,
+ &bar0->pfc_err_reg,
+ &sw_stat->pfc_err_cnt);
}
/*check for tda_err*/
if (val64 & TXDMA_TDA_INT) {
- if(do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
- TDA_SM1_ERR_ALARM, &bar0->tda_err_reg,
- &sw_stat->tda_err_cnt))
+ if (do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR |
+ TDA_SM0_ERR_ALARM |
+ TDA_SM1_ERR_ALARM,
+ &bar0->tda_err_reg,
+ &sw_stat->tda_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
- &bar0->tda_err_reg, &sw_stat->tda_err_cnt);
+ &bar0->tda_err_reg,
+ &sw_stat->tda_err_cnt);
}
/*check for pcc_err*/
if (val64 & TXDMA_PCC_INT) {
- if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM
- | PCC_N_SERR | PCC_6_COF_OV_ERR
- | PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR
- | PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR
- | PCC_TXB_ECC_DB_ERR, &bar0->pcc_err_reg,
- &sw_stat->pcc_err_cnt))
+ if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
+ PCC_N_SERR | PCC_6_COF_OV_ERR |
+ PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
+ PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR |
+ PCC_TXB_ECC_DB_ERR,
+ &bar0->pcc_err_reg,
+ &sw_stat->pcc_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
- &bar0->pcc_err_reg, &sw_stat->pcc_err_cnt);
+ &bar0->pcc_err_reg,
+ &sw_stat->pcc_err_cnt);
}
/*check for tti_err*/
if (val64 & TXDMA_TTI_INT) {
- if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, &bar0->tti_err_reg,
- &sw_stat->tti_err_cnt))
+ if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM,
+ &bar0->tti_err_reg,
+ &sw_stat->tti_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
- &bar0->tti_err_reg, &sw_stat->tti_err_cnt);
+ &bar0->tti_err_reg,
+ &sw_stat->tti_err_cnt);
}
/*check for lso_err*/
if (val64 & TXDMA_LSO_INT) {
- if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT
- | LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
- &bar0->lso_err_reg, &sw_stat->lso_err_cnt))
+ if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT |
+ LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
+ &bar0->lso_err_reg,
+ &sw_stat->lso_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
- &bar0->lso_err_reg, &sw_stat->lso_err_cnt);
+ &bar0->lso_err_reg,
+ &sw_stat->lso_err_cnt);
}
/*check for tpa_err*/
if (val64 & TXDMA_TPA_INT) {
- if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, &bar0->tpa_err_reg,
- &sw_stat->tpa_err_cnt))
+ if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM,
+ &bar0->tpa_err_reg,
+ &sw_stat->tpa_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, &bar0->tpa_err_reg,
- &sw_stat->tpa_err_cnt);
+ do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP,
+ &bar0->tpa_err_reg,
+ &sw_stat->tpa_err_cnt);
}
/*check for sm_err*/
if (val64 & TXDMA_SM_INT) {
- if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, &bar0->sm_err_reg,
- &sw_stat->sm_err_cnt))
+ if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM,
+ &bar0->sm_err_reg,
+ &sw_stat->sm_err_cnt))
goto reset;
}
val64 = readq(&bar0->mac_int_status);
if (val64 & MAC_INT_STATUS_TMAC_INT) {
if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
- &bar0->mac_tmac_err_reg,
- &sw_stat->mac_tmac_err_cnt))
+ &bar0->mac_tmac_err_reg,
+ &sw_stat->mac_tmac_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR
- | TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
- &bar0->mac_tmac_err_reg,
- &sw_stat->mac_tmac_err_cnt);
+ do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
+ TMAC_DESC_ECC_SG_ERR |
+ TMAC_DESC_ECC_DB_ERR,
+ &bar0->mac_tmac_err_reg,
+ &sw_stat->mac_tmac_err_cnt);
}
val64 = readq(&bar0->xgxs_int_status);
if (val64 & XGXS_INT_STATUS_TXGXS) {
if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
- &bar0->xgxs_txgxs_err_reg,
- &sw_stat->xgxs_txgxs_err_cnt))
+ &bar0->xgxs_txgxs_err_reg,
+ &sw_stat->xgxs_txgxs_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
- &bar0->xgxs_txgxs_err_reg,
- &sw_stat->xgxs_txgxs_err_cnt);
+ &bar0->xgxs_txgxs_err_reg,
+ &sw_stat->xgxs_txgxs_err_cnt);
}
val64 = readq(&bar0->rxdma_int_status);
if (val64 & RXDMA_INT_RC_INT_M) {
- if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR
- | RC_PRCn_SM_ERR_ALARM |RC_FTC_SM_ERR_ALARM,
- &bar0->rc_err_reg, &sw_stat->rc_err_cnt))
+ if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR |
+ RC_FTC_ECC_DB_ERR |
+ RC_PRCn_SM_ERR_ALARM |
+ RC_FTC_SM_ERR_ALARM,
+ &bar0->rc_err_reg,
+ &sw_stat->rc_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR
- | RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
- &sw_stat->rc_err_cnt);
- if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn
- | PRC_PCI_AB_F_WR_Rn, &bar0->prc_pcix_err_reg,
- &sw_stat->prc_pcix_err_cnt))
+ do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR |
+ RC_FTC_ECC_SG_ERR |
+ RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
+ &sw_stat->rc_err_cnt);
+ if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn |
+ PRC_PCI_AB_WR_Rn |
+ PRC_PCI_AB_F_WR_Rn,
+ &bar0->prc_pcix_err_reg,
+ &sw_stat->prc_pcix_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | PRC_PCI_DP_WR_Rn
- | PRC_PCI_DP_F_WR_Rn, &bar0->prc_pcix_err_reg,
- &sw_stat->prc_pcix_err_cnt);
+ do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn |
+ PRC_PCI_DP_WR_Rn |
+ PRC_PCI_DP_F_WR_Rn,
+ &bar0->prc_pcix_err_reg,
+ &sw_stat->prc_pcix_err_cnt);
}
if (val64 & RXDMA_INT_RPA_INT_M) {
if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
- &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt))
+ &bar0->rpa_err_reg,
+ &sw_stat->rpa_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
- &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt);
+ &bar0->rpa_err_reg,
+ &sw_stat->rpa_err_cnt);
}
if (val64 & RXDMA_INT_RDA_INT_M) {
- if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR
- | RDA_FRM_ECC_DB_N_AERR | RDA_SM1_ERR_ALARM
- | RDA_SM0_ERR_ALARM | RDA_RXD_ECC_DB_SERR,
- &bar0->rda_err_reg, &sw_stat->rda_err_cnt))
+ if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR |
+ RDA_FRM_ECC_DB_N_AERR |
+ RDA_SM1_ERR_ALARM |
+ RDA_SM0_ERR_ALARM |
+ RDA_RXD_ECC_DB_SERR,
+ &bar0->rda_err_reg,
+ &sw_stat->rda_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | RDA_FRM_ECC_SG_ERR
- | RDA_MISC_ERR | RDA_PCIX_ERR,
- &bar0->rda_err_reg, &sw_stat->rda_err_cnt);
+ do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR |
+ RDA_FRM_ECC_SG_ERR |
+ RDA_MISC_ERR |
+ RDA_PCIX_ERR,
+ &bar0->rda_err_reg,
+ &sw_stat->rda_err_cnt);
}
if (val64 & RXDMA_INT_RTI_INT_M) {
- if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, &bar0->rti_err_reg,
- &sw_stat->rti_err_cnt))
+ if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM,
+ &bar0->rti_err_reg,
+ &sw_stat->rti_err_cnt))
goto reset;
do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
- &bar0->rti_err_reg, &sw_stat->rti_err_cnt);
+ &bar0->rti_err_reg,
+ &sw_stat->rti_err_cnt);
}
val64 = readq(&bar0->mac_int_status);
if (val64 & MAC_INT_STATUS_RMAC_INT) {
if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
- &bar0->mac_rmac_err_reg,
- &sw_stat->mac_rmac_err_cnt))
+ &bar0->mac_rmac_err_reg,
+ &sw_stat->mac_rmac_err_cnt))
goto reset;
- do_s2io_chk_alarm_bit(RMAC_UNUSED_INT|RMAC_SINGLE_ECC_ERR|
- RMAC_DOUBLE_ECC_ERR, &bar0->mac_rmac_err_reg,
- &sw_stat->mac_rmac_err_cnt);
+ do_s2io_chk_alarm_bit(RMAC_UNUSED_INT |
+ RMAC_SINGLE_ECC_ERR |
+ RMAC_DOUBLE_ECC_ERR,
+ &bar0->mac_rmac_err_reg,
+ &sw_stat->mac_rmac_err_cnt);
}
val64 = readq(&bar0->xgxs_int_status);
if (val64 & XGXS_INT_STATUS_RXGXS) {
if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
- &bar0->xgxs_rxgxs_err_reg,
- &sw_stat->xgxs_rxgxs_err_cnt))
+ &bar0->xgxs_rxgxs_err_reg,
+ &sw_stat->xgxs_rxgxs_err_cnt))
goto reset;
}
val64 = readq(&bar0->mc_int_status);
- if(val64 & MC_INT_STATUS_MC_INT) {
- if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, &bar0->mc_err_reg,
- &sw_stat->mc_err_cnt))
+ if (val64 & MC_INT_STATUS_MC_INT) {
+ if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR,
+ &bar0->mc_err_reg,
+ &sw_stat->mc_err_cnt))
goto reset;
/* Handling Ecc errors */
@@ -4718,10 +4740,10 @@
* Reset XframeI only if critical error
*/
if (val64 &
- (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
- MC_ERR_REG_MIRI_ECC_DB_ERR_1))
- goto reset;
- }
+ (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
+ MC_ERR_REG_MIRI_ECC_DB_ERR_1))
+ goto reset;
+ }
} else
sw_stat->single_ecc_errs++;
}
@@ -4750,7 +4772,7 @@
*/
static irqreturn_t s2io_isr(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
+ struct net_device *dev = (struct net_device *)dev_id;
struct s2io_nic *sp = netdev_priv(dev);
struct XENA_dev_config __iomem *bar0 = sp->bar0;
int i;
@@ -4765,8 +4787,8 @@
if (!is_s2io_card_up(sp))
return IRQ_NONE;
- mac_control = &sp->mac_control;
config = &sp->config;
+ mac_control = &sp->mac_control;
/*
* Identify the cause for interrupt and call the appropriate
@@ -4777,14 +4799,11 @@
*/
reason = readq(&bar0->general_int_status);
- if (unlikely(reason == S2IO_MINUS_ONE) ) {
- /* Nothing much can be done. Get out */
- return IRQ_HANDLED;
- }
+ if (unlikely(reason == S2IO_MINUS_ONE))
+ return IRQ_HANDLED; /* Nothing much can be done. Get out */
- if (reason & (GEN_INTR_RXTRAFFIC |
- GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC))
- {
+ if (reason &
+ (GEN_INTR_RXTRAFFIC | GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC)) {
writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
if (config->napi) {
@@ -4803,8 +4822,11 @@
if (reason & GEN_INTR_RXTRAFFIC)
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
- for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i], 0);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ struct ring_info *ring = &mac_control->rings[i];
+
+ rx_intr_handler(ring, 0);
+ }
}
/*
@@ -4825,16 +4847,18 @@
* Reallocate the buffers from the interrupt handler itself.
*/
if (!config->napi) {
- for (i = 0; i < config->rx_ring_num; i++)
- s2io_chk_rx_buffers(sp, &mac_control->rings[i]);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ struct ring_info *ring = &mac_control->rings[i];
+
+ s2io_chk_rx_buffers(sp, ring);
+ }
}
writeq(sp->general_int_mask, &bar0->general_int_mask);
readl(&bar0->general_int_status);
return IRQ_HANDLED;
- }
- else if (!reason) {
+ } else if (!reason) {
/* The interrupt was not raised by us */
return IRQ_NONE;
}
@@ -4864,7 +4888,7 @@
cnt++;
if (cnt == 5)
break; /* Updt failed */
- } while(1);
+ } while (1);
}
}
@@ -4881,53 +4905,46 @@
static struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
struct s2io_nic *sp = netdev_priv(dev);
- struct mac_info *mac_control;
- struct config_param *config;
+ struct config_param *config = &sp->config;
+ struct mac_info *mac_control = &sp->mac_control;
+ struct stat_block *stats = mac_control->stats_info;
int i;
-
- mac_control = &sp->mac_control;
- config = &sp->config;
-
/* Configure Stats for immediate updt */
s2io_updt_stats(sp);
/* Using sp->stats as a staging area, because reset (due to mtu
change, for example) will clear some hardware counters */
- dev->stats.tx_packets +=
- le32_to_cpu(mac_control->stats_info->tmac_frms) -
+ dev->stats.tx_packets += le32_to_cpu(stats->tmac_frms) -
sp->stats.tx_packets;
- sp->stats.tx_packets =
- le32_to_cpu(mac_control->stats_info->tmac_frms);
- dev->stats.tx_errors +=
- le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) -
+ sp->stats.tx_packets = le32_to_cpu(stats->tmac_frms);
+
+ dev->stats.tx_errors += le32_to_cpu(stats->tmac_any_err_frms) -
sp->stats.tx_errors;
- sp->stats.tx_errors =
- le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
- dev->stats.rx_errors +=
- le64_to_cpu(mac_control->stats_info->rmac_drop_frms) -
+ sp->stats.tx_errors = le32_to_cpu(stats->tmac_any_err_frms);
+
+ dev->stats.rx_errors += le64_to_cpu(stats->rmac_drop_frms) -
sp->stats.rx_errors;
- sp->stats.rx_errors =
- le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
- dev->stats.multicast =
- le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) -
+ sp->stats.rx_errors = le64_to_cpu(stats->rmac_drop_frms);
+
+ dev->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms) -
sp->stats.multicast;
- sp->stats.multicast =
- le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
- dev->stats.rx_length_errors =
- le64_to_cpu(mac_control->stats_info->rmac_long_frms) -
+ sp->stats.multicast = le32_to_cpu(stats->rmac_vld_mcst_frms);
+
+ dev->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms) -
sp->stats.rx_length_errors;
- sp->stats.rx_length_errors =
- le64_to_cpu(mac_control->stats_info->rmac_long_frms);
+ sp->stats.rx_length_errors = le64_to_cpu(stats->rmac_long_frms);
/* collect per-ring rx_packets and rx_bytes */
dev->stats.rx_packets = dev->stats.rx_bytes = 0;
for (i = 0; i < config->rx_ring_num; i++) {
- dev->stats.rx_packets += mac_control->rings[i].rx_packets;
- dev->stats.rx_bytes += mac_control->rings[i].rx_bytes;
+ struct ring_info *ring = &mac_control->rings[i];
+
+ dev->stats.rx_packets += ring->rx_packets;
+ dev->stats.rx_bytes += ring->rx_bytes;
}
- return (&dev->stats);
+ return &dev->stats;
}
/**
@@ -4950,7 +4967,7 @@
struct s2io_nic *sp = netdev_priv(dev);
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
- 0xfeffffffffffULL;
+ 0xfeffffffffffULL;
u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
void __iomem *add;
struct config_param *config = &sp->config;
@@ -4962,13 +4979,13 @@
writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
&bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
- RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
+ RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
- S2IO_BIT_RESET);
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET);
sp->m_cast_flg = 1;
sp->all_multi_pos = config->max_mc_addr - 1;
@@ -4979,13 +4996,13 @@
writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
&bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
- RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
+ RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
- S2IO_BIT_RESET);
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET);
sp->m_cast_flg = 0;
sp->all_multi_pos = 0;
@@ -4998,7 +5015,7 @@
val64 |= MAC_CFG_RMAC_PROM_ENABLE;
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
- writel((u32) val64, add);
+ writel((u32)val64, add);
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
@@ -5020,7 +5037,7 @@
val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
- writel((u32) val64, add);
+ writel((u32)val64, add);
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
@@ -5033,18 +5050,17 @@
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 0;
- DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
- dev->name);
+ DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name);
}
/* Update individual M_CAST address list */
if ((!sp->m_cast_flg) && dev->mc_count) {
if (dev->mc_count >
(config->max_mc_addr - config->max_mac_addr)) {
- DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
+ DBG_PRINT(ERR_DBG,
+ "%s: No more Rx filters can be added - "
+ "please enable ALL_MULTI instead\n",
dev->name);
- DBG_PRINT(ERR_DBG, "can be added, please enable ");
- DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
return;
}
@@ -5056,20 +5072,20 @@
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
&bar0->rmac_addr_data0_mem);
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
- &bar0->rmac_addr_data1_mem);
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
- RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET
- (config->mc_start_offset + i);
+ RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ RMAC_ADDR_CMD_MEM_OFFSET
+ (config->mc_start_offset + i);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait for command completes */
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
- S2IO_BIT_RESET)) {
- DBG_PRINT(ERR_DBG, "%s: Adding ",
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET)) {
+ DBG_PRINT(ERR_DBG,
+ "%s: Adding Multicasts failed\n",
dev->name);
- DBG_PRINT(ERR_DBG, "Multicasts failed\n");
return;
}
}
@@ -5088,20 +5104,20 @@
writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
&bar0->rmac_addr_data0_mem);
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
- &bar0->rmac_addr_data1_mem);
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
- RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET
- (i + config->mc_start_offset);
+ RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ RMAC_ADDR_CMD_MEM_OFFSET
+ (i + config->mc_start_offset);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait for command completes */
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
- S2IO_BIT_RESET)) {
- DBG_PRINT(ERR_DBG, "%s: Adding ",
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET)) {
+ DBG_PRINT(ERR_DBG,
+ "%s: Adding Multicasts failed\n",
dev->name);
- DBG_PRINT(ERR_DBG, "Multicasts failed\n");
return;
}
}
@@ -5135,11 +5151,11 @@
/* restore unicast mac address */
for (offset = 0; offset < config->max_mac_addr; offset++)
do_s2io_prog_unicast(sp->dev,
- sp->def_mac_addr[offset].mac_addr);
+ sp->def_mac_addr[offset].mac_addr);
/* restore multicast mac address */
for (offset = config->mc_start_offset;
- offset < config->max_mc_addr; offset++)
+ offset < config->max_mc_addr; offset++)
do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
}
@@ -5169,13 +5185,13 @@
}
if (i == config->max_mc_addr) {
DBG_PRINT(ERR_DBG,
- "CAM full no space left for multicast MAC\n");
+ "CAM full no space left for multicast MAC\n");
return FAILURE;
}
/* Update the internal structure with this new mac address */
do_s2io_copy_mac_addr(sp, i, mac_addr);
- return (do_s2io_add_mac(sp, mac_addr, i));
+ return do_s2io_add_mac(sp, mac_addr, i);
}
/* add MAC address to CAM */
@@ -5185,17 +5201,16 @@
struct XENA_dev_config __iomem *bar0 = sp->bar0;
writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
- &bar0->rmac_addr_data0_mem);
+ &bar0->rmac_addr_data0_mem);
- val64 =
- RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET(off);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
- S2IO_BIT_RESET)) {
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET)) {
DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
return FAILURE;
}
@@ -5209,7 +5224,7 @@
struct config_param *config = &sp->config;
for (offset = 1;
- offset < config->max_mc_addr; offset++) {
+ offset < config->max_mc_addr; offset++) {
tmp64 = do_s2io_read_unicast_mc(sp, offset);
if (tmp64 == addr) {
/* disable the entry by writing 0xffffffffffffULL */
@@ -5221,7 +5236,7 @@
}
}
DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
- (unsigned long long)addr);
+ (unsigned long long)addr);
return FAILURE;
}
@@ -5232,20 +5247,20 @@
struct XENA_dev_config __iomem *bar0 = sp->bar0;
/* read mac addr */
- val64 =
- RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+ val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET(offset);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
- S2IO_BIT_RESET)) {
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET)) {
DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
return FAILURE;
}
tmp64 = readq(&bar0->rmac_addr_data0_mem);
- return (tmp64 >> 16);
+
+ return tmp64 >> 16;
}
/**
@@ -5262,7 +5277,7 @@
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
/* store the MAC address in CAM */
- return (do_s2io_prog_unicast(dev, dev->dev_addr));
+ return do_s2io_prog_unicast(dev, dev->dev_addr);
}
/**
* do_s2io_prog_unicast - Programs the Xframe mac address
@@ -5283,10 +5298,10 @@
struct config_param *config = &sp->config;
/*
- * Set the new MAC address as the new unicast filter and reflect this
- * change on the device address registered with the OS. It will be
- * at offset 0.
- */
+ * Set the new MAC address as the new unicast filter and reflect this
+ * change on the device address registered with the OS. It will be
+ * at offset 0.
+ */
for (i = 0; i < ETH_ALEN; i++) {
mac_addr <<= 8;
mac_addr |= addr[i];
@@ -5306,8 +5321,8 @@
if (tmp64 == mac_addr) {
DBG_PRINT(INFO_DBG,
- "MAC addr:0x%llx already present in CAM\n",
- (unsigned long long)mac_addr);
+ "MAC addr:0x%llx already present in CAM\n",
+ (unsigned long long)mac_addr);
return SUCCESS;
}
}
@@ -5317,7 +5332,8 @@
}
/* Update the internal structure with this new mac address */
do_s2io_copy_mac_addr(sp, i, mac_addr);
- return (do_s2io_add_mac(sp, mac_addr, i));
+
+ return do_s2io_add_mac(sp, mac_addr, i);
}
/**
@@ -5330,14 +5346,15 @@
* the NIC.
* Return value:
* 0 on success.
-*/
+ */
static int s2io_ethtool_sset(struct net_device *dev,
struct ethtool_cmd *info)
{
struct s2io_nic *sp = netdev_priv(dev);
if ((info->autoneg == AUTONEG_ENABLE) ||
- (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
+ (info->speed != SPEED_10000) ||
+ (info->duplex != DUPLEX_FULL))
return -EINVAL;
else {
s2io_close(sp->dev);
@@ -5418,14 +5435,14 @@
* buffer area.
* Return value :
* void .
-*/
+ */
static void s2io_ethtool_gregs(struct net_device *dev,
struct ethtool_regs *regs, void *space)
{
int i;
u64 reg;
- u8 *reg_space = (u8 *) space;
+ u8 *reg_space = (u8 *)space;
struct s2io_nic *sp = netdev_priv(dev);
regs->len = XENA_REG_SPACE;
@@ -5445,17 +5462,17 @@
* adapter LED bit of the adapter control bit to set/reset every time on
* invocation. The timer is set for 1/2 a second, hence tha NIC blinks
* once every second.
-*/
+ */
static void s2io_phy_id(unsigned long data)
{
- struct s2io_nic *sp = (struct s2io_nic *) data;
+ struct s2io_nic *sp = (struct s2io_nic *)data;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0;
u16 subid;
subid = sp->pdev->subsystem_device;
if ((sp->device_type == XFRAME_II_DEVICE) ||
- ((subid & 0xFF) >= 0x07)) {
+ ((subid & 0xFF) >= 0x07)) {
val64 = readq(&bar0->gpio_control);
val64 ^= GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
@@ -5492,19 +5509,17 @@
subid = sp->pdev->subsystem_device;
last_gpio_ctrl_val = readq(&bar0->gpio_control);
- if ((sp->device_type == XFRAME_I_DEVICE) &&
- ((subid & 0xFF) < 0x07)) {
+ if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) {
val64 = readq(&bar0->adapter_control);
if (!(val64 & ADAPTER_CNTL_EN)) {
- printk(KERN_ERR
- "Adapter Link down, cannot blink LED\n");
+ pr_err("Adapter Link down, cannot blink LED\n");
return -EFAULT;
}
}
if (sp->id_timer.function == NULL) {
init_timer(&sp->id_timer);
sp->id_timer.function = s2io_phy_id;
- sp->id_timer.data = (unsigned long) sp;
+ sp->id_timer.data = (unsigned long)sp;
}
mod_timer(&sp->id_timer, jiffies);
if (data)
@@ -5522,10 +5537,10 @@
}
static void s2io_ethtool_gringparam(struct net_device *dev,
- struct ethtool_ringparam *ering)
+ struct ethtool_ringparam *ering)
{
struct s2io_nic *sp = netdev_priv(dev);
- int i,tx_desc_count=0,rx_desc_count=0;
+ int i, tx_desc_count = 0, rx_desc_count = 0;
if (sp->rxd_mode == RXD_MODE_1)
ering->rx_max_pending = MAX_RX_DESC_1;
@@ -5536,7 +5551,7 @@
for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
tx_desc_count += sp->config.tx_cfg[i].fifo_len;
- DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
+ DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
ering->tx_pending = tx_desc_count;
rx_desc_count = 0;
for (i = 0 ; i < sp->config.rx_ring_num ; i++)
@@ -5546,7 +5561,7 @@
ering->rx_mini_max_pending = 0;
ering->rx_mini_pending = 0;
- if(sp->rxd_mode == RXD_MODE_1)
+ if (sp->rxd_mode == RXD_MODE_1)
ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
else if (sp->rxd_mode == RXD_MODE_3B)
ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
@@ -5591,7 +5606,7 @@
*/
static int s2io_ethtool_setpause_data(struct net_device *dev,
- struct ethtool_pauseparam *ep)
+ struct ethtool_pauseparam *ep)
{
u64 val64;
struct s2io_nic *sp = netdev_priv(dev);
@@ -5627,7 +5642,7 @@
*/
#define S2IO_DEV_ID 5
-static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
+static int read_eeprom(struct s2io_nic *sp, int off, u64 *data)
{
int ret = -1;
u32 exit_cnt = 0;
@@ -5635,9 +5650,11 @@
struct XENA_dev_config __iomem *bar0 = sp->bar0;
if (sp->device_type == XFRAME_I_DEVICE) {
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
- I2C_CONTROL_CNTL_START;
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
+ I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(0x3) |
+ I2C_CONTROL_READ |
+ I2C_CONTROL_CNTL_START;
SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
while (exit_cnt < 5) {
@@ -5692,16 +5709,18 @@
* 0 on success, -1 on failure.
*/
-static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
+static int write_eeprom(struct s2io_nic *sp, int off, u64 data, int cnt)
{
int exit_cnt = 0, ret = -1;
u64 val64;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
if (sp->device_type == XFRAME_I_DEVICE) {
- val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
- I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
- I2C_CONTROL_CNTL_START;
+ val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
+ I2C_CONTROL_ADDR(off) |
+ I2C_CONTROL_BYTE_CNT(cnt) |
+ I2C_CONTROL_SET_DATA((u32)data) |
+ I2C_CONTROL_CNTL_START;
SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
while (exit_cnt < 5) {
@@ -5718,7 +5737,7 @@
if (sp->device_type == XFRAME_II_DEVICE) {
int write_cnt = (cnt == 8) ? 0 : cnt;
- writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
+ writeq(SPI_DATA_WRITE(data, (cnt << 3)), &bar0->spi_data);
val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
SPI_CONTROL_BYTECNT(write_cnt) |
@@ -5745,14 +5764,14 @@
{
u8 *vpd_data;
u8 data;
- int i=0, cnt, fail = 0;
+ int i = 0, cnt, fail = 0;
int vpd_addr = 0x80;
+ struct swStat *swstats = &nic->mac_control.stats_info->sw_stat;
if (nic->device_type == XFRAME_II_DEVICE) {
strcpy(nic->product_name, "Xframe II 10GbE network adapter");
vpd_addr = 0x80;
- }
- else {
+ } else {
strcpy(nic->product_name, "Xframe I 10GbE network adapter");
vpd_addr = 0x50;
}
@@ -5760,16 +5779,16 @@
vpd_data = kmalloc(256, GFP_KERNEL);
if (!vpd_data) {
- nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
+ swstats->mem_alloc_fail_cnt++;
return;
}
- nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
+ swstats->mem_allocated += 256;
- for (i = 0; i < 256; i +=4 ) {
+ for (i = 0; i < 256; i += 4) {
pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data);
pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
- for (cnt = 0; cnt <5; cnt++) {
+ for (cnt = 0; cnt < 5; cnt++) {
msleep(2);
pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
if (data == 0x80)
@@ -5784,15 +5803,15 @@
(u32 *)&vpd_data[i]);
}
- if(!fail) {
+ if (!fail) {
/* read serial number of adapter */
for (cnt = 0; cnt < 256; cnt++) {
- if ((vpd_data[cnt] == 'S') &&
- (vpd_data[cnt+1] == 'N') &&
- (vpd_data[cnt+2] < VPD_STRING_LEN)) {
+ if ((vpd_data[cnt] == 'S') &&
+ (vpd_data[cnt+1] == 'N') &&
+ (vpd_data[cnt+2] < VPD_STRING_LEN)) {
memset(nic->serial_num, 0, VPD_STRING_LEN);
memcpy(nic->serial_num, &vpd_data[cnt + 3],
- vpd_data[cnt+2]);
+ vpd_data[cnt+2]);
break;
}
}
@@ -5803,7 +5822,7 @@
memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
}
kfree(vpd_data);
- nic->mac_control.stats_info->sw_stat.mem_freed += 256;
+ swstats->mem_freed += 256;
}
/**
@@ -5820,7 +5839,7 @@
*/
static int s2io_ethtool_geeprom(struct net_device *dev,
- struct ethtool_eeprom *eeprom, u8 * data_buf)
+ struct ethtool_eeprom *eeprom, u8 * data_buf)
{
u32 i, valid;
u64 data;
@@ -5858,7 +5877,7 @@
static int s2io_ethtool_seeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom,
- u8 * data_buf)
+ u8 *data_buf)
{
int len = eeprom->len, cnt = 0;
u64 valid = 0, data;
@@ -5866,24 +5885,24 @@
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
DBG_PRINT(ERR_DBG,
- "ETHTOOL_WRITE_EEPROM Err: Magic value ");
- DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
+ "ETHTOOL_WRITE_EEPROM Err: "
+ "Magic value is wrong, it is 0x%x should be 0x%x\n",
+ (sp->pdev->vendor | (sp->pdev->device << 16)),
eeprom->magic);
return -EFAULT;
}
while (len) {
- data = (u32) data_buf[cnt] & 0x000000FF;
- if (data) {
- valid = (u32) (data << 24);
- } else
+ data = (u32)data_buf[cnt] & 0x000000FF;
+ if (data)
+ valid = (u32)(data << 24);
+ else
valid = data;
if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
DBG_PRINT(ERR_DBG,
- "ETHTOOL_WRITE_EEPROM Err: Cannot ");
- DBG_PRINT(ERR_DBG,
- "write into the specified offset\n");
+ "ETHTOOL_WRITE_EEPROM Err: "
+ "Cannot write into the specified offset\n");
return -EFAULT;
}
cnt++;
@@ -5906,7 +5925,7 @@
* 0 on success.
*/
-static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
+static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0, exp_val;
@@ -5915,13 +5934,13 @@
val64 = readq(&bar0->pif_rd_swapper_fb);
if (val64 != 0x123456789abcdefULL) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1);
}
val64 = readq(&bar0->rmac_pause_cfg);
if (val64 != 0xc000ffff00000000ULL) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2);
}
val64 = readq(&bar0->rx_queue_cfg);
@@ -5931,13 +5950,13 @@
exp_val = 0x0808080808080808ULL;
if (val64 != exp_val) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3);
}
val64 = readq(&bar0->xgxs_efifo_cfg);
if (val64 != 0x000000001923141EULL) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4);
}
val64 = 0x5A5A5A5A5A5A5A5AULL;
@@ -5945,7 +5964,7 @@
val64 = readq(&bar0->xmsi_data);
if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
fail = 1;
- DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
+ DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);
}
val64 = 0xA5A5A5A5A5A5A5A5ULL;
@@ -5953,7 +5972,7 @@
val64 = readq(&bar0->xmsi_data);
if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
fail = 1;
- DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
+ DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);
}
*data = fail;
@@ -5973,7 +5992,7 @@
* 0 on success.
*/
-static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
+static int s2io_eeprom_test(struct s2io_nic *sp, uint64_t *data)
{
int fail = 0;
u64 ret_data, org_4F0, org_7F0;
@@ -6002,9 +6021,9 @@
if (ret_data != 0x012345) {
DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
- "Data written %llx Data read %llx\n",
- dev->name, (unsigned long long)0x12345,
- (unsigned long long)ret_data);
+ "Data written %llx Data read %llx\n",
+ dev->name, (unsigned long long)0x12345,
+ (unsigned long long)ret_data);
fail = 1;
}
@@ -6024,9 +6043,9 @@
if (ret_data != 0x012345) {
DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
- "Data written %llx Data read %llx\n",
- dev->name, (unsigned long long)0x12345,
- (unsigned long long)ret_data);
+ "Data written %llx Data read %llx\n",
+ dev->name, (unsigned long long)0x12345,
+ (unsigned long long)ret_data);
fail = 1;
}
@@ -6075,7 +6094,7 @@
* 0 on success and -1 on failure.
*/
-static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
+static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data)
{
u8 bist = 0;
int cnt = 0, ret = -1;
@@ -6111,13 +6130,13 @@
* 0 on success.
*/
-static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
+static int s2io_link_test(struct s2io_nic *sp, uint64_t *data)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
val64 = readq(&bar0->adapter_status);
- if(!(LINK_IS_UP(val64)))
+ if (!(LINK_IS_UP(val64)))
*data = 1;
else
*data = 0;
@@ -6138,7 +6157,7 @@
* 0 on success.
*/
-static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
+static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
@@ -6161,28 +6180,26 @@
while (iteration < 2) {
val64 = 0x55555555aaaa0000ULL;
- if (iteration == 1) {
+ if (iteration == 1)
val64 ^= 0xFFFFFFFFFFFF0000ULL;
- }
writeq(val64, &bar0->mc_rldram_test_d0);
val64 = 0xaaaa5a5555550000ULL;
- if (iteration == 1) {
+ if (iteration == 1)
val64 ^= 0xFFFFFFFFFFFF0000ULL;
- }
writeq(val64, &bar0->mc_rldram_test_d1);
val64 = 0x55aaaaaaaa5a0000ULL;
- if (iteration == 1) {
+ if (iteration == 1)
val64 ^= 0xFFFFFFFFFFFF0000ULL;
- }
writeq(val64, &bar0->mc_rldram_test_d2);
val64 = (u64) (0x0000003ffffe0100ULL);
writeq(val64, &bar0->mc_rldram_test_add);
- val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
- MC_RLDRAM_TEST_GO;
+ val64 = MC_RLDRAM_TEST_MODE |
+ MC_RLDRAM_TEST_WRITE |
+ MC_RLDRAM_TEST_GO;
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
for (cnt = 0; cnt < 5; cnt++) {
@@ -6240,7 +6257,7 @@
static void s2io_ethtool_test(struct net_device *dev,
struct ethtool_test *ethtest,
- uint64_t * data)
+ uint64_t *data)
{
struct s2io_nic *sp = netdev_priv(dev);
int orig_state = netif_running(sp->dev);
@@ -6273,8 +6290,7 @@
} else {
/* Online Tests. */
if (!orig_state) {
- DBG_PRINT(ERR_DBG,
- "%s: is not up, cannot run test\n",
+ DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",
dev->name);
data[0] = -1;
data[1] = -1;
@@ -6295,291 +6311,292 @@
static void s2io_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *estats,
- u64 * tmp_stats)
+ u64 *tmp_stats)
{
int i = 0, k;
struct s2io_nic *sp = netdev_priv(dev);
- struct stat_block *stat_info = sp->mac_control.stats_info;
+ struct stat_block *stats = sp->mac_control.stats_info;
+ struct swStat *swstats = &stats->sw_stat;
+ struct xpakStat *xstats = &stats->xpak_stat;
s2io_updt_stats(sp);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_frms);
+ (u64)le32_to_cpu(stats->tmac_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_data_octets);
- tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
+ (u64)le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stats->tmac_data_octets);
+ tmp_stats[i++] = le64_to_cpu(stats->tmac_drop_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_mcst_frms);
+ (u64)le32_to_cpu(stats->tmac_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_mcst_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_bcst_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
- tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_ttl_octets_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_ttl_octets);
+ (u64)le32_to_cpu(stats->tmac_bcst_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_bcst_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->tmac_pause_ctrl_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_ucst_frms_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_ucst_frms);
+ (u64)le32_to_cpu(stats->tmac_ttl_octets_oflow) << 32 |
+ le32_to_cpu(stats->tmac_ttl_octets);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_nucst_frms_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_nucst_frms);
+ (u64)le32_to_cpu(stats->tmac_ucst_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_ucst_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_any_err_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->tmac_ttl_less_fb_octets);
- tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
+ (u64)le32_to_cpu(stats->tmac_nucst_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_nucst_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_vld_ip);
+ (u64)le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
+ le32_to_cpu(stats->tmac_any_err_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->tmac_ttl_less_fb_octets);
+ tmp_stats[i++] = le64_to_cpu(stats->tmac_vld_ip_octets);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_drop_ip);
+ (u64)le32_to_cpu(stats->tmac_vld_ip_oflow) << 32 |
+ le32_to_cpu(stats->tmac_vld_ip);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_icmp);
+ (u64)le32_to_cpu(stats->tmac_drop_ip_oflow) << 32 |
+ le32_to_cpu(stats->tmac_drop_ip);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_rst_tcp);
- tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
- tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
- le32_to_cpu(stat_info->tmac_udp);
+ (u64)le32_to_cpu(stats->tmac_icmp_oflow) << 32 |
+ le32_to_cpu(stats->tmac_icmp);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_vld_frms);
+ (u64)le32_to_cpu(stats->tmac_rst_tcp_oflow) << 32 |
+ le32_to_cpu(stats->tmac_rst_tcp);
+ tmp_stats[i++] = le64_to_cpu(stats->tmac_tcp);
+ tmp_stats[i++] = (u64)le32_to_cpu(stats->tmac_udp_oflow) << 32 |
+ le32_to_cpu(stats->tmac_udp);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_data_octets);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
+ (u64)le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_vld_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_vld_mcst_frms);
+ (u64)le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
+ le32_to_cpu(stats->rmac_data_octets);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_fcs_err_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_drop_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_vld_bcst_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_out_rng_len_err_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_unsup_ctrl_frms);
- tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_ttl_octets_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_ttl_octets);
- tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_accepted_ucst_frms_oflow)
- << 32 | le32_to_cpu(stat_info->rmac_accepted_ucst_frms);
+ (u64)le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_vld_mcst_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_accepted_nucst_frms_oflow)
- << 32 | le32_to_cpu(stat_info->rmac_accepted_nucst_frms);
+ (u64)le32_to_cpu(stats->rmac_vld_bcst_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_vld_bcst_frms);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_in_rng_len_err_frms);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_out_rng_len_err_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_long_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_pause_ctrl_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_unsup_ctrl_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_discarded_frms);
- tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_drop_events_oflow)
- << 32 | le32_to_cpu(stat_info->rmac_drop_events);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_less_fb_octets);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_frms);
+ (u64)le32_to_cpu(stats->rmac_ttl_octets_oflow) << 32 |
+ le32_to_cpu(stats->rmac_ttl_octets);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_usized_frms);
+ (u64)le32_to_cpu(stats->rmac_accepted_ucst_frms_oflow) << 32
+ | le32_to_cpu(stats->rmac_accepted_ucst_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_osized_frms);
+ (u64)le32_to_cpu(stats->rmac_accepted_nucst_frms_oflow)
+ << 32 | le32_to_cpu(stats->rmac_accepted_nucst_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_frag_frms);
+ (u64)le32_to_cpu(stats->rmac_discarded_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_discarded_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_jabber_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_64_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_65_127_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_128_255_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_256_511_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_512_1023_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1024_1518_frms);
+ (u64)le32_to_cpu(stats->rmac_drop_events_oflow)
+ << 32 | le32_to_cpu(stats->rmac_drop_events);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_less_fb_octets);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_ip);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
+ (u64)le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_usized_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_drop_ip);
+ (u64)le32_to_cpu(stats->rmac_osized_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_osized_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_icmp);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
+ (u64)le32_to_cpu(stats->rmac_frag_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_frag_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_udp);
+ (u64)le32_to_cpu(stats->rmac_jabber_frms_oflow) << 32 |
+ le32_to_cpu(stats->rmac_jabber_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_64_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_65_127_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_128_255_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_256_511_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_512_1023_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_1024_1518_frms);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_err_drp_udp);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_err_sym);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q0);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q1);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q2);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q3);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q4);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q5);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q6);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q7);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q0);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q1);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q2);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q3);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q4);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q5);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q6);
- tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q7);
+ (u64)le32_to_cpu(stats->rmac_ip_oflow) << 32 |
+ le32_to_cpu(stats->rmac_ip);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ip_octets);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_hdr_err_ip);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_pause_cnt);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_data_err_cnt);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_ctrl_err_cnt);
+ (u64)le32_to_cpu(stats->rmac_drop_ip_oflow) << 32 |
+ le32_to_cpu(stats->rmac_drop_ip);
tmp_stats[i++] =
- (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
- le32_to_cpu(stat_info->rmac_accepted_ip);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
- tmp_stats[i++] = le32_to_cpu(stat_info->rd_req_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_rtry_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_rd_ack_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->wr_req_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_rtry_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->wr_disc_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_wr_ack_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->txp_wr_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->txd_rd_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->txd_wr_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rxd_rd_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rxd_wr_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->txf_rd_cnt);
- tmp_stats[i++] = le32_to_cpu(stat_info->rxf_wr_cnt);
+ (u64)le32_to_cpu(stats->rmac_icmp_oflow) << 32 |
+ le32_to_cpu(stats->rmac_icmp);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_tcp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stats->rmac_udp_oflow) << 32 |
+ le32_to_cpu(stats->rmac_udp);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stats->rmac_err_drp_udp_oflow) << 32 |
+ le32_to_cpu(stats->rmac_err_drp_udp);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_err_sym);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q0);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q1);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q2);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q3);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q4);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q5);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q6);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q7);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q0);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q1);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q2);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q3);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q4);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q5);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q6);
+ tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q7);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stats->rmac_pause_cnt_oflow) << 32 |
+ le32_to_cpu(stats->rmac_pause_cnt);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_data_err_cnt);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_ctrl_err_cnt);
+ tmp_stats[i++] =
+ (u64)le32_to_cpu(stats->rmac_accepted_ip_oflow) << 32 |
+ le32_to_cpu(stats->rmac_accepted_ip);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_err_tcp);
+ tmp_stats[i++] = le32_to_cpu(stats->rd_req_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_rtry_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_rd_ack_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->wr_req_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_rtry_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->wr_disc_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_wr_ack_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->txp_wr_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->txd_rd_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->txd_wr_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->rxd_rd_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->rxd_wr_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->txf_rd_cnt);
+ tmp_stats[i++] = le32_to_cpu(stats->rxf_wr_cnt);
/* Enhanced statistics exist only for Hercules */
- if(sp->device_type == XFRAME_II_DEVICE) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
tmp_stats[i++] =
- le64_to_cpu(stat_info->rmac_ttl_1519_4095_frms);
+ le64_to_cpu(stats->rmac_ttl_1519_4095_frms);
tmp_stats[i++] =
- le64_to_cpu(stat_info->rmac_ttl_4096_8191_frms);
+ le64_to_cpu(stats->rmac_ttl_4096_8191_frms);
tmp_stats[i++] =
- le64_to_cpu(stat_info->rmac_ttl_8192_max_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_gt_max_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_osized_alt_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_jabber_alt_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_gt_max_alt_frms);
- tmp_stats[i++] = le64_to_cpu(stat_info->rmac_vlan_frms);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_len_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_fcs_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pf_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_da_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_red_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_rts_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ingm_full_discard);
- tmp_stats[i++] = le32_to_cpu(stat_info->link_fault_cnt);
+ le64_to_cpu(stats->rmac_ttl_8192_max_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_gt_max_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_osized_alt_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_jabber_alt_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_gt_max_alt_frms);
+ tmp_stats[i++] = le64_to_cpu(stats->rmac_vlan_frms);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_len_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_fcs_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_pf_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_da_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_red_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_rts_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->rmac_ingm_full_discard);
+ tmp_stats[i++] = le32_to_cpu(stats->link_fault_cnt);
}
tmp_stats[i++] = 0;
- tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
- tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
- tmp_stats[i++] = stat_info->sw_stat.parity_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.serious_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.soft_reset_cnt;
- tmp_stats[i++] = stat_info->sw_stat.fifo_full_cnt;
+ tmp_stats[i++] = swstats->single_ecc_errs;
+ tmp_stats[i++] = swstats->double_ecc_errs;
+ tmp_stats[i++] = swstats->parity_err_cnt;
+ tmp_stats[i++] = swstats->serious_err_cnt;
+ tmp_stats[i++] = swstats->soft_reset_cnt;
+ tmp_stats[i++] = swstats->fifo_full_cnt;
for (k = 0; k < MAX_RX_RINGS; k++)
- tmp_stats[i++] = stat_info->sw_stat.ring_full_cnt[k];
- tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_high;
- tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_low;
- tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_high;
- tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_low;
- tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_high;
- tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_low;
- tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_high;
- tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_low;
- tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_high;
- tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_low;
- tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_high;
- tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_low;
- tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
- tmp_stats[i++] = stat_info->sw_stat.sending_both;
- tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
- tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
- if (stat_info->sw_stat.num_aggregations) {
- u64 tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
+ tmp_stats[i++] = swstats->ring_full_cnt[k];
+ tmp_stats[i++] = xstats->alarm_transceiver_temp_high;
+ tmp_stats[i++] = xstats->alarm_transceiver_temp_low;
+ tmp_stats[i++] = xstats->alarm_laser_bias_current_high;
+ tmp_stats[i++] = xstats->alarm_laser_bias_current_low;
+ tmp_stats[i++] = xstats->alarm_laser_output_power_high;
+ tmp_stats[i++] = xstats->alarm_laser_output_power_low;
+ tmp_stats[i++] = xstats->warn_transceiver_temp_high;
+ tmp_stats[i++] = xstats->warn_transceiver_temp_low;
+ tmp_stats[i++] = xstats->warn_laser_bias_current_high;
+ tmp_stats[i++] = xstats->warn_laser_bias_current_low;
+ tmp_stats[i++] = xstats->warn_laser_output_power_high;
+ tmp_stats[i++] = xstats->warn_laser_output_power_low;
+ tmp_stats[i++] = swstats->clubbed_frms_cnt;
+ tmp_stats[i++] = swstats->sending_both;
+ tmp_stats[i++] = swstats->outof_sequence_pkts;
+ tmp_stats[i++] = swstats->flush_max_pkts;
+ if (swstats->num_aggregations) {
+ u64 tmp = swstats->sum_avg_pkts_aggregated;
int count = 0;
/*
* Since 64-bit divide does not work on all platforms,
* do repeated subtraction.
*/
- while (tmp >= stat_info->sw_stat.num_aggregations) {
- tmp -= stat_info->sw_stat.num_aggregations;
+ while (tmp >= swstats->num_aggregations) {
+ tmp -= swstats->num_aggregations;
count++;
}
tmp_stats[i++] = count;
- }
- else
+ } else
tmp_stats[i++] = 0;
- tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
- tmp_stats[i++] = stat_info->sw_stat.pci_map_fail_cnt;
- tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
- tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
- tmp_stats[i++] = stat_info->sw_stat.mem_freed;
- tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
- tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
- tmp_stats[i++] = stat_info->sw_stat.link_up_time;
- tmp_stats[i++] = stat_info->sw_stat.link_down_time;
+ tmp_stats[i++] = swstats->mem_alloc_fail_cnt;
+ tmp_stats[i++] = swstats->pci_map_fail_cnt;
+ tmp_stats[i++] = swstats->watchdog_timer_cnt;
+ tmp_stats[i++] = swstats->mem_allocated;
+ tmp_stats[i++] = swstats->mem_freed;
+ tmp_stats[i++] = swstats->link_up_cnt;
+ tmp_stats[i++] = swstats->link_down_cnt;
+ tmp_stats[i++] = swstats->link_up_time;
+ tmp_stats[i++] = swstats->link_down_time;
- tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
+ tmp_stats[i++] = swstats->tx_buf_abort_cnt;
+ tmp_stats[i++] = swstats->tx_desc_abort_cnt;
+ tmp_stats[i++] = swstats->tx_parity_err_cnt;
+ tmp_stats[i++] = swstats->tx_link_loss_cnt;
+ tmp_stats[i++] = swstats->tx_list_proc_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tda_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.pfc_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.pcc_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tti_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.tpa_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.sm_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.lso_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.mac_tmac_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.mac_rmac_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.xgxs_txgxs_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.xgxs_rxgxs_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rc_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.prc_pcix_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rpa_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rda_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.rti_err_cnt;
- tmp_stats[i++] = stat_info->sw_stat.mc_err_cnt;
+ tmp_stats[i++] = swstats->rx_parity_err_cnt;
+ tmp_stats[i++] = swstats->rx_abort_cnt;
+ tmp_stats[i++] = swstats->rx_parity_abort_cnt;
+ tmp_stats[i++] = swstats->rx_rda_fail_cnt;
+ tmp_stats[i++] = swstats->rx_unkn_prot_cnt;
+ tmp_stats[i++] = swstats->rx_fcs_err_cnt;
+ tmp_stats[i++] = swstats->rx_buf_size_err_cnt;
+ tmp_stats[i++] = swstats->rx_rxd_corrupt_cnt;
+ tmp_stats[i++] = swstats->rx_unkn_err_cnt;
+ tmp_stats[i++] = swstats->tda_err_cnt;
+ tmp_stats[i++] = swstats->pfc_err_cnt;
+ tmp_stats[i++] = swstats->pcc_err_cnt;
+ tmp_stats[i++] = swstats->tti_err_cnt;
+ tmp_stats[i++] = swstats->tpa_err_cnt;
+ tmp_stats[i++] = swstats->sm_err_cnt;
+ tmp_stats[i++] = swstats->lso_err_cnt;
+ tmp_stats[i++] = swstats->mac_tmac_err_cnt;
+ tmp_stats[i++] = swstats->mac_rmac_err_cnt;
+ tmp_stats[i++] = swstats->xgxs_txgxs_err_cnt;
+ tmp_stats[i++] = swstats->xgxs_rxgxs_err_cnt;
+ tmp_stats[i++] = swstats->rc_err_cnt;
+ tmp_stats[i++] = swstats->prc_pcix_err_cnt;
+ tmp_stats[i++] = swstats->rpa_err_cnt;
+ tmp_stats[i++] = swstats->rda_err_cnt;
+ tmp_stats[i++] = swstats->rti_err_cnt;
+ tmp_stats[i++] = swstats->mc_err_cnt;
}
static int s2io_ethtool_get_regs_len(struct net_device *dev)
{
- return (XENA_REG_SPACE);
+ return XENA_REG_SPACE;
}
-static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+static u32 s2io_ethtool_get_rx_csum(struct net_device *dev)
{
struct s2io_nic *sp = netdev_priv(dev);
- return (sp->rx_csum);
+ return sp->rx_csum;
}
static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
@@ -6596,7 +6613,7 @@
static int s2io_get_eeprom_len(struct net_device *dev)
{
- return (XENA_EEPROM_SPACE);
+ return XENA_EEPROM_SPACE;
}
static int s2io_get_sset_count(struct net_device *dev, int sset)
@@ -6607,7 +6624,7 @@
case ETH_SS_TEST:
return S2IO_TEST_LEN;
case ETH_SS_STATS:
- switch(sp->device_type) {
+ switch (sp->device_type) {
case XFRAME_I_DEVICE:
return XFRAME_I_STAT_LEN;
case XFRAME_II_DEVICE:
@@ -6621,7 +6638,7 @@
}
static void s2io_ethtool_get_strings(struct net_device *dev,
- u32 stringset, u8 * data)
+ u32 stringset, u8 *data)
{
int stat_size = 0;
struct s2io_nic *sp = netdev_priv(dev);
@@ -6632,16 +6649,16 @@
break;
case ETH_SS_STATS:
stat_size = sizeof(ethtool_xena_stats_keys);
- memcpy(data, ðtool_xena_stats_keys,stat_size);
- if(sp->device_type == XFRAME_II_DEVICE) {
+ memcpy(data, ðtool_xena_stats_keys, stat_size);
+ if (sp->device_type == XFRAME_II_DEVICE) {
memcpy(data + stat_size,
- ðtool_enhanced_stats_keys,
- sizeof(ethtool_enhanced_stats_keys));
+ ðtool_enhanced_stats_keys,
+ sizeof(ethtool_enhanced_stats_keys));
stat_size += sizeof(ethtool_enhanced_stats_keys);
}
memcpy(data + stat_size, ðtool_driver_stats_keys,
- sizeof(ethtool_driver_stats_keys));
+ sizeof(ethtool_driver_stats_keys));
}
}
@@ -6730,8 +6747,7 @@
int ret = 0;
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
- DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
- dev->name);
+ DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name);
return -EPERM;
}
@@ -6764,7 +6780,8 @@
static void s2io_set_link(struct work_struct *work)
{
- struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
+ struct s2io_nic *nic = container_of(work, struct s2io_nic,
+ set_link_task);
struct net_device *dev = nic->dev;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64;
@@ -6797,7 +6814,7 @@
val64 |= ADAPTER_CNTL_EN;
writeq(val64, &bar0->adapter_control);
if (CARDS_WITH_FAULTY_LINK_INDICATORS(
- nic->device_type, subid)) {
+ nic->device_type, subid)) {
val64 = readq(&bar0->gpio_control);
val64 |= GPIO_CTRL_GPIO_0;
writeq(val64, &bar0->gpio_control);
@@ -6808,8 +6825,9 @@
}
nic->device_enabled_once = true;
} else {
- DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
- DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
+ DBG_PRINT(ERR_DBG,
+ "%s: Error: device is not Quiescent\n",
+ dev->name);
s2io_stop_all_tx_queue(nic);
}
}
@@ -6827,7 +6845,7 @@
}
/* turn off LED */
val64 = readq(&bar0->adapter_control);
- val64 = val64 &(~ADAPTER_LED_ON);
+ val64 = val64 & (~ADAPTER_LED_ON);
writeq(val64, &bar0->adapter_control);
s2io_link(nic, LINK_DOWN);
}
@@ -6838,9 +6856,9 @@
}
static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
- struct buffAdd *ba,
- struct sk_buff **skb, u64 *temp0, u64 *temp1,
- u64 *temp2, int size)
+ struct buffAdd *ba,
+ struct sk_buff **skb, u64 *temp0, u64 *temp1,
+ u64 *temp2, int size)
{
struct net_device *dev = sp->dev;
struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
@@ -6859,23 +6877,21 @@
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate ");
- DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
- sp->mac_control.stats_info->sw_stat. \
- mem_alloc_fail_cnt++;
+ DBG_PRINT(INFO_DBG,
+ "%s: Out of memory to allocate %s\n",
+ dev->name, "1 buf mode SKBs");
+ stats->mem_alloc_fail_cnt++;
return -ENOMEM ;
}
- sp->mac_control.stats_info->sw_stat.mem_allocated
- += (*skb)->truesize;
+ stats->mem_allocated += (*skb)->truesize;
/* storing the mapped addr in a temp variable
* such it will be used for next rxd whose
* Host Control is NULL
*/
rxdp1->Buffer0_ptr = *temp0 =
- pci_map_single( sp->pdev, (*skb)->data,
- size - NET_IP_ALIGN,
- PCI_DMA_FROMDEVICE);
+ pci_map_single(sp->pdev, (*skb)->data,
+ size - NET_IP_ALIGN,
+ PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
goto memalloc_failed;
rxdp->Host_Control = (unsigned long) (*skb);
@@ -6890,15 +6906,14 @@
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate ");
- DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
- sp->mac_control.stats_info->sw_stat. \
- mem_alloc_fail_cnt++;
+ DBG_PRINT(INFO_DBG,
+ "%s: Out of memory to allocate %s\n",
+ dev->name,
+ "2 buf mode SKBs");
+ stats->mem_alloc_fail_cnt++;
return -ENOMEM;
}
- sp->mac_control.stats_info->sw_stat.mem_allocated
- += (*skb)->truesize;
+ stats->mem_allocated += (*skb)->truesize;
rxdp3->Buffer2_ptr = *temp2 =
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
@@ -6906,13 +6921,14 @@
if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
goto memalloc_failed;
rxdp3->Buffer0_ptr = *temp0 =
- pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
- PCI_DMA_FROMDEVICE);
+ pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(sp->pdev,
- rxdp3->Buffer0_ptr)) {
- pci_unmap_single (sp->pdev,
- (dma_addr_t)rxdp3->Buffer2_ptr,
- dev->mtu + 4, PCI_DMA_FROMDEVICE);
+ rxdp3->Buffer0_ptr)) {
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp3->Buffer2_ptr,
+ dev->mtu + 4,
+ PCI_DMA_FROMDEVICE);
goto memalloc_failed;
}
rxdp->Host_Control = (unsigned long) (*skb);
@@ -6920,25 +6936,27 @@
/* Buffer-1 will be dummy buffer not used */
rxdp3->Buffer1_ptr = *temp1 =
pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
- PCI_DMA_FROMDEVICE);
+ PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(sp->pdev,
- rxdp3->Buffer1_ptr)) {
- pci_unmap_single (sp->pdev,
- (dma_addr_t)rxdp3->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single (sp->pdev,
- (dma_addr_t)rxdp3->Buffer2_ptr,
- dev->mtu + 4, PCI_DMA_FROMDEVICE);
+ rxdp3->Buffer1_ptr)) {
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp3->Buffer0_ptr,
+ BUF0_LEN, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev,
+ (dma_addr_t)rxdp3->Buffer2_ptr,
+ dev->mtu + 4,
+ PCI_DMA_FROMDEVICE);
goto memalloc_failed;
}
}
}
return 0;
- memalloc_failed:
- stats->pci_map_fail_cnt++;
- stats->mem_freed += (*skb)->truesize;
- dev_kfree_skb(*skb);
- return -ENOMEM;
+
+memalloc_failed:
+ stats->pci_map_fail_cnt++;
+ stats->mem_freed += (*skb)->truesize;
+ dev_kfree_skb(*skb);
+ return -ENOMEM;
}
static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
@@ -6946,19 +6964,19 @@
{
struct net_device *dev = sp->dev;
if (sp->rxd_mode == RXD_MODE_1) {
- rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
+ rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
} else if (sp->rxd_mode == RXD_MODE_3B) {
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
- rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
+ rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu + 4);
}
}
static int rxd_owner_bit_reset(struct s2io_nic *sp)
{
int i, j, k, blk_cnt = 0, size;
- struct mac_info * mac_control = &sp->mac_control;
struct config_param *config = &sp->config;
+ struct mac_info *mac_control = &sp->mac_control;
struct net_device *dev = sp->dev;
struct RxD_t *rxdp = NULL;
struct sk_buff *skb = NULL;
@@ -6974,20 +6992,21 @@
size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt = config->rx_cfg[i].num_rxd /
- (rxd_count[sp->rxd_mode] +1);
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+ struct ring_info *ring = &mac_control->rings[i];
+
+ blk_cnt = rx_cfg->num_rxd / (rxd_count[sp->rxd_mode] + 1);
for (j = 0; j < blk_cnt; j++) {
for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
- rxdp = mac_control->rings[i].
- rx_blocks[j].rxds[k].virt_addr;
- if(sp->rxd_mode == RXD_MODE_3B)
- ba = &mac_control->rings[i].ba[j][k];
- if (set_rxd_buffer_pointer(sp, rxdp, ba,
- &skb,(u64 *)&temp0_64,
- (u64 *)&temp1_64,
- (u64 *)&temp2_64,
- size) == -ENOMEM) {
+ rxdp = ring->rx_blocks[j].rxds[k].virt_addr;
+ if (sp->rxd_mode == RXD_MODE_3B)
+ ba = &ring->ba[j][k];
+ if (set_rxd_buffer_pointer(sp, rxdp, ba, &skb,
+ (u64 *)&temp0_64,
+ (u64 *)&temp1_64,
+ (u64 *)&temp2_64,
+ size) == -ENOMEM) {
return 0;
}
@@ -7002,7 +7021,7 @@
}
-static int s2io_add_isr(struct s2io_nic * sp)
+static int s2io_add_isr(struct s2io_nic *sp)
{
int ret = 0;
struct net_device *dev = sp->dev;
@@ -7015,7 +7034,10 @@
sp->config.intr_type = INTA;
}
- /* Store the values of the MSIX table in the struct s2io_nic structure */
+ /*
+ * Store the values of the MSIX table in
+ * the struct s2io_nic structure
+ */
store_xmsi_data(sp);
/* After proper initialization of H/W, register ISR */
@@ -7025,45 +7047,47 @@
for (i = 0; i < sp->num_entries; i++) {
if (sp->s2io_entries[i].in_use == MSIX_FLG) {
if (sp->s2io_entries[i].type ==
- MSIX_RING_TYPE) {
+ MSIX_RING_TYPE) {
sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
dev->name, i);
err = request_irq(sp->entries[i].vector,
- s2io_msix_ring_handle, 0,
- sp->desc[i],
- sp->s2io_entries[i].arg);
+ s2io_msix_ring_handle,
+ 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
} else if (sp->s2io_entries[i].type ==
- MSIX_ALARM_TYPE) {
+ MSIX_ALARM_TYPE) {
sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
- dev->name, i);
+ dev->name, i);
err = request_irq(sp->entries[i].vector,
- s2io_msix_fifo_handle, 0,
- sp->desc[i],
- sp->s2io_entries[i].arg);
+ s2io_msix_fifo_handle,
+ 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
}
/* if either data or addr is zero print it. */
if (!(sp->msix_info[i].addr &&
- sp->msix_info[i].data)) {
+ sp->msix_info[i].data)) {
DBG_PRINT(ERR_DBG,
- "%s @Addr:0x%llx Data:0x%llx\n",
- sp->desc[i],
- (unsigned long long)
- sp->msix_info[i].addr,
- (unsigned long long)
- ntohl(sp->msix_info[i].data));
+ "%s @Addr:0x%llx Data:0x%llx\n",
+ sp->desc[i],
+ (unsigned long long)
+ sp->msix_info[i].addr,
+ (unsigned long long)
+ ntohl(sp->msix_info[i].data));
} else
msix_rx_cnt++;
if (err) {
remove_msix_isr(sp);
DBG_PRINT(ERR_DBG,
- "%s:MSI-X-%d registration "
- "failed\n", dev->name, i);
+ "%s:MSI-X-%d registration "
+ "failed\n", dev->name, i);
DBG_PRINT(ERR_DBG,
- "%s: Defaulting to INTA\n",
- dev->name);
+ "%s: Defaulting to INTA\n",
+ dev->name);
sp->config.intr_type = INTA;
break;
}
@@ -7072,15 +7096,14 @@
}
}
if (!err) {
- printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
- --msix_rx_cnt);
- DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
- " through alarm vector\n");
+ pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt);
+ DBG_PRINT(INFO_DBG,
+ "MSI-X-TX entries enabled through alarm vector\n");
}
}
if (sp->config.intr_type == INTA) {
- err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
- sp->name, dev);
+ err = request_irq((int)sp->pdev->irq, s2io_isr, IRQF_SHARED,
+ sp->name, dev);
if (err) {
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
dev->name);
@@ -7089,7 +7112,8 @@
}
return 0;
}
-static void s2io_rem_isr(struct s2io_nic * sp)
+
+static void s2io_rem_isr(struct s2io_nic *sp)
{
if (sp->config.intr_type == MSI_X)
remove_msix_isr(sp);
@@ -7097,7 +7121,7 @@
remove_inta_isr(sp);
}
-static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
+static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
{
int cnt = 0;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -7110,9 +7134,8 @@
del_timer_sync(&sp->alarm_timer);
/* If s2io_set_link task is executing, wait till it completes. */
- while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) {
+ while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state)))
msleep(50);
- }
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
/* Disable napi */
@@ -7121,7 +7144,7 @@
if (config->intr_type == MSI_X) {
for (; off < sp->config.rx_ring_num; off++)
napi_disable(&sp->mac_control.rings[off].napi);
- }
+ }
else
napi_disable(&sp->napi);
}
@@ -7136,7 +7159,7 @@
s2io_link(sp, LINK_DOWN);
/* Check if the device is Quiescent and then Reset the NIC */
- while(do_io) {
+ while (do_io) {
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
@@ -7148,17 +7171,16 @@
val64 = readq(&bar0->adapter_status);
if (verify_xena_quiescence(sp)) {
- if(verify_pcc_quiescent(sp, sp->device_enabled_once))
- break;
+ if (verify_pcc_quiescent(sp, sp->device_enabled_once))
+ break;
}
msleep(50);
cnt++;
if (cnt == 10) {
- DBG_PRINT(ERR_DBG,
- "s2io_close:Device not Quiescent ");
- DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
- (unsigned long long) val64);
+ DBG_PRINT(ERR_DBG, "Device not Quiescent - "
+ "adapter status reads 0x%llx\n",
+ (unsigned long long)val64);
break;
}
}
@@ -7174,17 +7196,17 @@
clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
}
-static void s2io_card_down(struct s2io_nic * sp)
+static void s2io_card_down(struct s2io_nic *sp)
{
do_s2io_card_down(sp, 1);
}
-static int s2io_card_up(struct s2io_nic * sp)
+static int s2io_card_up(struct s2io_nic *sp)
{
int i, ret = 0;
- struct mac_info *mac_control;
struct config_param *config;
- struct net_device *dev = (struct net_device *) sp->dev;
+ struct mac_info *mac_control;
+ struct net_device *dev = (struct net_device *)sp->dev;
u16 interruptible;
/* Initialize the H/W I/O registers */
@@ -7201,12 +7223,14 @@
* Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
*/
- mac_control = &sp->mac_control;
config = &sp->config;
+ mac_control = &sp->mac_control;
for (i = 0; i < config->rx_ring_num; i++) {
- mac_control->rings[i].mtu = dev->mtu;
- ret = fill_rx_buffers(sp, &mac_control->rings[i], 1);
+ struct ring_info *ring = &mac_control->rings[i];
+
+ ring->mtu = dev->mtu;
+ ret = fill_rx_buffers(sp, ring, 1);
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
dev->name);
@@ -7215,7 +7239,7 @@
return -ENOMEM;
}
DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
- mac_control->rings[i].rx_bufs_left);
+ ring->rx_bufs_left);
}
/* Initialise napi */
@@ -7233,7 +7257,7 @@
sp->promisc_flg = 0;
if (sp->m_cast_flg) {
sp->m_cast_flg = 0;
- sp->all_multi_pos= 0;
+ sp->all_multi_pos = 0;
}
/* Setting its receive mode */
@@ -7242,7 +7266,7 @@
if (sp->lro) {
/* Initialize max aggregatable pkts per session based on MTU */
sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
- /* Check if we can use(if specified) user provided value */
+ /* Check if we can use (if specified) user provided value */
if (lro_max_pkts < sp->lro_max_aggr_per_sess)
sp->lro_max_aggr_per_sess = lro_max_pkts;
}
@@ -7304,12 +7328,10 @@
s2io_card_down(sp);
if (s2io_card_up(sp)) {
- DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
- dev->name);
+ DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);
}
s2io_wake_all_tx_queue(sp);
- DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
- dev->name);
+ DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
out_unlock:
rtnl_unlock();
}
@@ -7330,11 +7352,12 @@
static void s2io_tx_watchdog(struct net_device *dev)
{
struct s2io_nic *sp = netdev_priv(dev);
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
if (netif_carrier_ok(dev)) {
- sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
+ swstats->watchdog_timer_cnt++;
schedule_work(&sp->rst_timer_task);
- sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
+ swstats->soft_reset_cnt++;
}
}
@@ -7358,81 +7381,73 @@
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
{
struct s2io_nic *sp = ring_data->nic;
- struct net_device *dev = (struct net_device *) ring_data->dev;
+ struct net_device *dev = (struct net_device *)ring_data->dev;
struct sk_buff *skb = (struct sk_buff *)
- ((unsigned long) rxdp->Host_Control);
+ ((unsigned long)rxdp->Host_Control);
int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
struct lro *uninitialized_var(lro);
u8 err_mask;
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
skb->dev = dev;
if (err) {
/* Check for parity error */
- if (err & 0x1) {
- sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
- }
+ if (err & 0x1)
+ swstats->parity_err_cnt++;
+
err_mask = err >> 48;
- switch(err_mask) {
- case 1:
- sp->mac_control.stats_info->sw_stat.
- rx_parity_err_cnt++;
+ switch (err_mask) {
+ case 1:
+ swstats->rx_parity_err_cnt++;
break;
- case 2:
- sp->mac_control.stats_info->sw_stat.
- rx_abort_cnt++;
+ case 2:
+ swstats->rx_abort_cnt++;
break;
- case 3:
- sp->mac_control.stats_info->sw_stat.
- rx_parity_abort_cnt++;
+ case 3:
+ swstats->rx_parity_abort_cnt++;
break;
- case 4:
- sp->mac_control.stats_info->sw_stat.
- rx_rda_fail_cnt++;
+ case 4:
+ swstats->rx_rda_fail_cnt++;
break;
- case 5:
- sp->mac_control.stats_info->sw_stat.
- rx_unkn_prot_cnt++;
+ case 5:
+ swstats->rx_unkn_prot_cnt++;
break;
- case 6:
- sp->mac_control.stats_info->sw_stat.
- rx_fcs_err_cnt++;
+ case 6:
+ swstats->rx_fcs_err_cnt++;
break;
- case 7:
- sp->mac_control.stats_info->sw_stat.
- rx_buf_size_err_cnt++;
+ case 7:
+ swstats->rx_buf_size_err_cnt++;
break;
- case 8:
- sp->mac_control.stats_info->sw_stat.
- rx_rxd_corrupt_cnt++;
+ case 8:
+ swstats->rx_rxd_corrupt_cnt++;
break;
- case 15:
- sp->mac_control.stats_info->sw_stat.
- rx_unkn_err_cnt++;
+ case 15:
+ swstats->rx_unkn_err_cnt++;
break;
}
/*
- * Drop the packet if bad transfer code. Exception being
- * 0x5, which could be due to unsupported IPv6 extension header.
- * In this case, we let stack handle the packet.
- * Note that in this case, since checksum will be incorrect,
- * stack will validate the same.
- */
+ * Drop the packet if bad transfer code. Exception being
+ * 0x5, which could be due to unsupported IPv6 extension header.
+ * In this case, we let stack handle the packet.
+ * Note that in this case, since checksum will be incorrect,
+ * stack will validate the same.
+ */
if (err_mask != 0x5) {
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
- dev->name, err_mask);
+ dev->name, err_mask);
dev->stats.rx_crc_errors++;
- sp->mac_control.stats_info->sw_stat.mem_freed
+ swstats->mem_freed
+= skb->truesize;
dev_kfree_skb(skb);
ring_data->rx_bufs_left -= 1;
@@ -7463,8 +7478,9 @@
skb_put(skb, buf2_len);
}
- if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!ring_data->lro) ||
- (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
+ if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
+ ((!ring_data->lro) ||
+ (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
(sp->rx_csum)) {
l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
@@ -7481,52 +7497,42 @@
int ret = 0;
ret = s2io_club_tcp_session(ring_data,
- skb->data, &tcp, &tcp_len, &lro,
- rxdp, sp);
+ skb->data, &tcp,
+ &tcp_len, &lro,
+ rxdp, sp);
switch (ret) {
- case 3: /* Begin anew */
- lro->parent = skb;
- goto aggregate;
- case 1: /* Aggregate */
- {
- lro_append_pkt(sp, lro,
- skb, tcp_len);
- goto aggregate;
- }
- case 4: /* Flush session */
- {
- lro_append_pkt(sp, lro,
- skb, tcp_len);
- queue_rx_frame(lro->parent,
- lro->vlan_tag);
- clear_lro_session(lro);
- sp->mac_control.stats_info->
- sw_stat.flush_max_pkts++;
- goto aggregate;
- }
- case 2: /* Flush both */
- lro->parent->data_len =
- lro->frags_len;
- sp->mac_control.stats_info->
- sw_stat.sending_both++;
- queue_rx_frame(lro->parent,
- lro->vlan_tag);
- clear_lro_session(lro);
- goto send_up;
- case 0: /* sessions exceeded */
- case -1: /* non-TCP or not
- * L2 aggregatable
- */
- case 5: /*
- * First pkt in session not
- * L3/L4 aggregatable
- */
- break;
- default:
- DBG_PRINT(ERR_DBG,
- "%s: Samadhana!!\n",
- __func__);
- BUG();
+ case 3: /* Begin anew */
+ lro->parent = skb;
+ goto aggregate;
+ case 1: /* Aggregate */
+ lro_append_pkt(sp, lro, skb, tcp_len);
+ goto aggregate;
+ case 4: /* Flush session */
+ lro_append_pkt(sp, lro, skb, tcp_len);
+ queue_rx_frame(lro->parent,
+ lro->vlan_tag);
+ clear_lro_session(lro);
+ swstats->flush_max_pkts++;
+ goto aggregate;
+ case 2: /* Flush both */
+ lro->parent->data_len = lro->frags_len;
+ swstats->sending_both++;
+ queue_rx_frame(lro->parent,
+ lro->vlan_tag);
+ clear_lro_session(lro);
+ goto send_up;
+ case 0: /* sessions exceeded */
+ case -1: /* non-TCP or not L2 aggregatable */
+ case 5: /*
+ * First pkt in session not
+ * L3/L4 aggregatable
+ */
+ break;
+ default:
+ DBG_PRINT(ERR_DBG,
+ "%s: Samadhana!!\n",
+ __func__);
+ BUG();
}
}
} else {
@@ -7539,7 +7545,7 @@
} else
skb->ip_summed = CHECKSUM_NONE;
- sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
+ swstats->mem_freed += skb->truesize;
send_up:
skb_record_rx_queue(skb, ring_no);
queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
@@ -7561,9 +7567,10 @@
* void.
*/
-static void s2io_link(struct s2io_nic * sp, int link)
+static void s2io_link(struct s2io_nic *sp, int link)
{
- struct net_device *dev = (struct net_device *) sp->dev;
+ struct net_device *dev = (struct net_device *)sp->dev;
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
if (link != sp->last_link_state) {
init_tti(sp, link);
@@ -7571,16 +7578,16 @@
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
s2io_stop_all_tx_queue(sp);
netif_carrier_off(dev);
- if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
- sp->mac_control.stats_info->sw_stat.link_up_time =
- jiffies - sp->start_time;
- sp->mac_control.stats_info->sw_stat.link_down_cnt++;
+ if (swstats->link_up_cnt)
+ swstats->link_up_time =
+ jiffies - sp->start_time;
+ swstats->link_down_cnt++;
} else {
DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
- if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
- sp->mac_control.stats_info->sw_stat.link_down_time =
- jiffies - sp->start_time;
- sp->mac_control.stats_info->sw_stat.link_up_cnt++;
+ if (swstats->link_down_cnt)
+ swstats->link_down_time =
+ jiffies - sp->start_time;
+ swstats->link_up_cnt++;
netif_carrier_on(dev);
s2io_wake_all_tx_queue(sp);
}
@@ -7600,7 +7607,7 @@
* void
*/
-static void s2io_init_pci(struct s2io_nic * sp)
+static void s2io_init_pci(struct s2io_nic *sp)
{
u16 pci_cmd = 0, pcix_cmd = 0;
@@ -7620,20 +7627,18 @@
}
static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
- u8 *dev_multiq)
+ u8 *dev_multiq)
{
- if ((tx_fifo_num > MAX_TX_FIFOS) ||
- (tx_fifo_num < 1)) {
- DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
- "(%d) not supported\n", tx_fifo_num);
+ if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) {
+ DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
+ "(%d) not supported\n", tx_fifo_num);
if (tx_fifo_num < 1)
tx_fifo_num = 1;
else
tx_fifo_num = MAX_TX_FIFOS;
- DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
- DBG_PRINT(ERR_DBG, "tx fifos\n");
+ DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);
}
if (multiq)
@@ -7642,44 +7647,44 @@
if (tx_steering_type && (1 == tx_fifo_num)) {
if (tx_steering_type != TX_DEFAULT_STEERING)
DBG_PRINT(ERR_DBG,
- "s2io: Tx steering is not supported with "
- "one fifo. Disabling Tx steering.\n");
+ "Tx steering is not supported with "
+ "one fifo. Disabling Tx steering.\n");
tx_steering_type = NO_STEERING;
}
if ((tx_steering_type < NO_STEERING) ||
- (tx_steering_type > TX_DEFAULT_STEERING)) {
- DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
- "supported\n");
- DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
+ (tx_steering_type > TX_DEFAULT_STEERING)) {
+ DBG_PRINT(ERR_DBG,
+ "Requested transmit steering not supported\n");
+ DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");
tx_steering_type = NO_STEERING;
}
if (rx_ring_num > MAX_RX_RINGS) {
- DBG_PRINT(ERR_DBG, "s2io: Requested number of rx rings not "
- "supported\n");
- DBG_PRINT(ERR_DBG, "s2io: Default to %d rx rings\n",
- MAX_RX_RINGS);
+ DBG_PRINT(ERR_DBG,
+ "Requested number of rx rings not supported\n");
+ DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",
+ MAX_RX_RINGS);
rx_ring_num = MAX_RX_RINGS;
}
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
- DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
+ DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "
"Defaulting to INTA\n");
*dev_intr_type = INTA;
}
if ((*dev_intr_type == MSI_X) &&
- ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
- (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
- DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
- "Defaulting to INTA\n");
+ ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
+ (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
+ DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "
+ "Defaulting to INTA\n");
*dev_intr_type = INTA;
}
if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
- DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
- DBG_PRINT(ERR_DBG, "s2io: Defaulting to 1-buffer mode\n");
+ DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");
+ DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
rx_ring_mode = 1;
}
return SUCCESS;
@@ -7712,8 +7717,8 @@
writeq(val64, &bar0->rts_ds_mem_ctrl);
return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
- RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
- S2IO_BIT_RESET);
+ RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
+ S2IO_BIT_RESET);
}
static const struct net_device_ops s2io_netdev_ops = {
@@ -7759,8 +7764,8 @@
u64 val64 = 0, tmp64 = 0;
struct XENA_dev_config __iomem *bar0 = NULL;
u16 subid;
- struct mac_info *mac_control;
struct config_param *config;
+ struct mac_info *mac_control;
int mode;
u8 dev_intr_type = intr_type;
u8 dev_multiq = 0;
@@ -7769,31 +7774,33 @@
if (ret)
return ret;
- if ((ret = pci_enable_device(pdev))) {
+ ret = pci_enable_device(pdev);
+ if (ret) {
DBG_PRINT(ERR_DBG,
- "s2io_init_nic: pci_enable_device failed\n");
+ "%s: pci_enable_device failed\n", __func__);
return ret;
}
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
+ DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__);
dma_flag = true;
- if (pci_set_consistent_dma_mask
- (pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
DBG_PRINT(ERR_DBG,
- "Unable to obtain 64bit DMA for \
- consistent allocations\n");
+ "Unable to obtain 64bit DMA "
+ "for consistent allocations\n");
pci_disable_device(pdev);
return -ENOMEM;
}
} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
+ DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__);
} else {
pci_disable_device(pdev);
return -ENOMEM;
}
- if ((ret = pci_request_regions(pdev, s2io_driver_name))) {
- DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n", __func__, ret);
+ ret = pci_request_regions(pdev, s2io_driver_name);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",
+ __func__, ret);
pci_disable_device(pdev);
return -ENODEV;
}
@@ -7827,7 +7834,7 @@
sp->config.intr_type = dev_intr_type;
if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
- (pdev->device == PCI_DEVICE_ID_HERC_UNI))
+ (pdev->device == PCI_DEVICE_ID_HERC_UNI))
sp->device_type = XFRAME_II_DEVICE;
else
sp->device_type = XFRAME_I_DEVICE;
@@ -7844,8 +7851,8 @@
* these parameters are not not specified during load time, they
* are initialized with default values.
*/
- mac_control = &sp->mac_control;
config = &sp->config;
+ mac_control = &sp->mac_control;
config->napi = napi;
config->tx_steering_type = tx_steering_type;
@@ -7858,16 +7865,16 @@
/* Initialize the fifos used for tx steering */
if (config->tx_fifo_num < 5) {
- if (config->tx_fifo_num == 1)
- sp->total_tcp_fifos = 1;
- else
- sp->total_tcp_fifos = config->tx_fifo_num - 1;
- sp->udp_fifo_idx = config->tx_fifo_num - 1;
- sp->total_udp_fifos = 1;
- sp->other_fifo_idx = sp->total_tcp_fifos - 1;
+ if (config->tx_fifo_num == 1)
+ sp->total_tcp_fifos = 1;
+ else
+ sp->total_tcp_fifos = config->tx_fifo_num - 1;
+ sp->udp_fifo_idx = config->tx_fifo_num - 1;
+ sp->total_udp_fifos = 1;
+ sp->other_fifo_idx = sp->total_tcp_fifos - 1;
} else {
sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
- FIFO_OTHER_MAX_NUM);
+ FIFO_OTHER_MAX_NUM);
sp->udp_fifo_idx = sp->total_tcp_fifos;
sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
@@ -7875,8 +7882,10 @@
config->multiq = dev_multiq;
for (i = 0; i < config->tx_fifo_num; i++) {
- config->tx_cfg[i].fifo_len = tx_fifo_len[i];
- config->tx_cfg[i].fifo_priority = i;
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ tx_cfg->fifo_len = tx_fifo_len[i];
+ tx_cfg->fifo_priority = i;
}
/* mapping the QoS priority to the configured fifos */
@@ -7890,9 +7899,10 @@
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
for (i = 0; i < config->tx_fifo_num; i++) {
- config->tx_cfg[i].f_no_snoop =
- (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
- if (config->tx_cfg[i].fifo_len < 65) {
+ struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
+
+ tx_cfg->f_no_snoop = (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
+ if (tx_cfg->fifo_len < 65) {
config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
break;
}
@@ -7903,20 +7913,23 @@
/* Rx side parameters. */
config->rx_ring_num = rx_ring_num;
for (i = 0; i < config->rx_ring_num; i++) {
- config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
- (rxd_count[sp->rxd_mode] + 1);
- config->rx_cfg[i].ring_priority = i;
- mac_control->rings[i].rx_bufs_left = 0;
- mac_control->rings[i].rxd_mode = sp->rxd_mode;
- mac_control->rings[i].rxd_count = rxd_count[sp->rxd_mode];
- mac_control->rings[i].pdev = sp->pdev;
- mac_control->rings[i].dev = sp->dev;
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+ struct ring_info *ring = &mac_control->rings[i];
+
+ rx_cfg->num_rxd = rx_ring_sz[i] * (rxd_count[sp->rxd_mode] + 1);
+ rx_cfg->ring_priority = i;
+ ring->rx_bufs_left = 0;
+ ring->rxd_mode = sp->rxd_mode;
+ ring->rxd_count = rxd_count[sp->rxd_mode];
+ ring->pdev = sp->pdev;
+ ring->dev = sp->dev;
}
for (i = 0; i < rx_ring_num; i++) {
- config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
- config->rx_cfg[i].f_no_snoop =
- (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
+ struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
+
+ rx_cfg->ring_org = RING_ORG_BUFF1;
+ rx_cfg->f_no_snoop = (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
}
/* Setting Mac Control parameters */
@@ -7927,8 +7940,7 @@
/* initialize the shared memory used by the NIC and the host */
if (init_shared_mem(sp)) {
- DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
- dev->name);
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);
ret = -ENOMEM;
goto mem_alloc_failed;
}
@@ -7950,12 +7962,13 @@
}
dev->irq = pdev->irq;
- dev->base_addr = (unsigned long) sp->bar0;
+ dev->base_addr = (unsigned long)sp->bar0;
/* Initializing the BAR1 address as the start of the FIFO pointer. */
for (j = 0; j < MAX_TX_FIFOS; j++) {
- mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
- (sp->bar1 + (j * 0x00020000));
+ mac_control->tx_FIFO_start[j] =
+ (struct TxFIFO_element __iomem *)
+ (sp->bar1 + (j * 0x00020000));
}
/* Driver entry points */
@@ -7980,7 +7993,7 @@
/* Setting swapper control on the NIC, for proper reset operation */
if (s2io_set_swapper(sp)) {
- DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
+ DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",
dev->name);
ret = -EAGAIN;
goto set_swap_failed;
@@ -7990,8 +8003,8 @@
if (sp->device_type & XFRAME_II_DEVICE) {
mode = s2io_verify_pci_mode(sp);
if (mode < 0) {
- DBG_PRINT(ERR_DBG, "%s: ", __func__);
- DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
+ DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",
+ __func__);
ret = -EBADSLT;
goto set_swap_failed;
}
@@ -8009,15 +8022,17 @@
if (ret) {
DBG_PRINT(ERR_DBG,
- "s2io: MSI-X requested but failed to enable\n");
+ "MSI-X requested but failed to enable\n");
sp->config.intr_type = INTA;
}
}
if (config->intr_type == MSI_X) {
- for (i = 0; i < config->rx_ring_num ; i++)
- netif_napi_add(dev, &mac_control->rings[i].napi,
- s2io_poll_msix, 64);
+ for (i = 0; i < config->rx_ring_num ; i++) {
+ struct ring_info *ring = &mac_control->rings[i];
+
+ netif_napi_add(dev, &ring->napi, s2io_poll_msix, 64);
+ }
} else {
netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
}
@@ -8038,12 +8053,13 @@
*/
bar0 = sp->bar0;
val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
- RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
+ RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
writeq(val64, &bar0->rmac_addr_cmd_mem);
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
- RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
+ RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+ S2IO_BIT_RESET);
tmp64 = readq(&bar0->rmac_addr_data0_mem);
- mac_down = (u32) tmp64;
+ mac_down = (u32)tmp64;
mac_up = (u32) (tmp64 >> 32);
sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
@@ -8074,10 +8090,10 @@
/* Configure MSIX vector for number of rings configured plus one */
if ((sp->device_type == XFRAME_II_DEVICE) &&
- (config->intr_type == MSI_X))
+ (config->intr_type == MSI_X))
sp->num_entries = config->rx_ring_num + 1;
- /* Store the values of the MSIX table in the s2io_nic structure */
+ /* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */
s2io_reset(sp);
@@ -8089,8 +8105,11 @@
sp->state = 0;
/* Initialize spinlocks */
- for (i = 0; i < sp->config.tx_fifo_num; i++)
- spin_lock_init(&mac_control->fifos[i].tx_lock);
+ for (i = 0; i < sp->config.tx_fifo_num; i++) {
+ struct fifo_info *fifo = &mac_control->fifos[i];
+
+ spin_lock_init(&fifo->tx_lock);
+ }
/*
* SXE-002: Configure link and activity LED to init state
@@ -8102,7 +8121,7 @@
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) bar0 + 0x2700);
+ writeq(val64, (void __iomem *)bar0 + 0x2700);
val64 = readq(&bar0->gpio_control);
}
@@ -8115,30 +8134,29 @@
}
s2io_vpd_read(sp);
DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
- DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
+ DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,
sp->product_name, pdev->revision);
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
s2io_driver_version);
- DBG_PRINT(ERR_DBG, "%s: MAC ADDR: %pM\n", dev->name, dev->dev_addr);
- DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
+ DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);
+ DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);
if (sp->device_type & XFRAME_II_DEVICE) {
mode = s2io_print_pci_mode(sp);
if (mode < 0) {
- DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
ret = -EBADSLT;
unregister_netdev(dev);
goto set_swap_failed;
}
}
- switch(sp->rxd_mode) {
- case RXD_MODE_1:
- DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
- dev->name);
- break;
- case RXD_MODE_3B:
- DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
- dev->name);
- break;
+ switch (sp->rxd_mode) {
+ case RXD_MODE_1:
+ DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
+ dev->name);
+ break;
+ case RXD_MODE_3B:
+ DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
+ dev->name);
+ break;
}
switch (sp->config.napi) {
@@ -8151,48 +8169,54 @@
}
DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
- sp->config.tx_fifo_num);
+ sp->config.tx_fifo_num);
DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
sp->config.rx_ring_num);
- switch(sp->config.intr_type) {
- case INTA:
- DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
- break;
- case MSI_X:
- DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
- break;
+ switch (sp->config.intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
+ break;
}
if (sp->config.multiq) {
- for (i = 0; i < sp->config.tx_fifo_num; i++)
- mac_control->fifos[i].multiq = config->multiq;
+ for (i = 0; i < sp->config.tx_fifo_num; i++) {
+ struct fifo_info *fifo = &mac_control->fifos[i];
+
+ fifo->multiq = config->multiq;
+ }
DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
- dev->name);
+ dev->name);
} else
DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
- dev->name);
+ dev->name);
switch (sp->config.tx_steering_type) {
case NO_STEERING:
- DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
- " transmit\n", dev->name);
- break;
+ DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",
+ dev->name);
+ break;
case TX_PRIORITY_STEERING:
- DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
- " transmit\n", dev->name);
+ DBG_PRINT(ERR_DBG,
+ "%s: Priority steering enabled for transmit\n",
+ dev->name);
break;
case TX_DEFAULT_STEERING:
- DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
- " transmit\n", dev->name);
+ DBG_PRINT(ERR_DBG,
+ "%s: Default steering enabled for transmit\n",
+ dev->name);
}
if (sp->lro)
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
dev->name);
if (ufo)
- DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
- " enabled\n", dev->name);
+ DBG_PRINT(ERR_DBG,
+ "%s: UDP Fragmentation Offload(UFO) enabled\n",
+ dev->name);
/* Initialize device name */
sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
@@ -8210,13 +8234,13 @@
return 0;
- register_failed:
- set_swap_failed:
+register_failed:
+set_swap_failed:
iounmap(sp->bar1);
- bar1_remap_failed:
+bar1_remap_failed:
iounmap(sp->bar0);
- bar0_remap_failed:
- mem_alloc_failed:
+bar0_remap_failed:
+mem_alloc_failed:
free_shared_mem(sp);
pci_disable_device(pdev);
pci_release_regions(pdev);
@@ -8238,7 +8262,7 @@
static void __devexit s2io_rem_nic(struct pci_dev *pdev)
{
struct net_device *dev =
- (struct net_device *) pci_get_drvdata(pdev);
+ (struct net_device *)pci_get_drvdata(pdev);
struct s2io_nic *sp;
if (dev == NULL) {
@@ -8286,28 +8310,28 @@
module_exit(s2io_closer);
static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
- struct tcphdr **tcp, struct RxD_t *rxdp,
- struct s2io_nic *sp)
+ struct tcphdr **tcp, struct RxD_t *rxdp,
+ struct s2io_nic *sp)
{
int ip_off;
u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
- DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
+ DBG_PRINT(INIT_DBG,
+ "%s: Non-TCP frames not supported for LRO\n",
__func__);
return -1;
}
/* Checking for DIX type or DIX type with VLAN */
- if ((l2_type == 0)
- || (l2_type == 4)) {
+ if ((l2_type == 0) || (l2_type == 4)) {
ip_off = HEADER_ETHERNET_II_802_3_SIZE;
/*
* If vlan stripping is disabled and the frame is VLAN tagged,
* shift the offset by the VLAN header size bytes.
*/
if ((!sp->vlan_strip_flag) &&
- (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
+ (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
ip_off += HEADER_VLAN_SIZE;
} else {
/* LLC, SNAP etc are considered non-mergeable */
@@ -8325,22 +8349,25 @@
static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
struct tcphdr *tcp)
{
- DBG_PRINT(INFO_DBG,"%s: Been here...\n", __func__);
- if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
- (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
+ DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
+ if ((lro->iph->saddr != ip->saddr) ||
+ (lro->iph->daddr != ip->daddr) ||
+ (lro->tcph->source != tcp->source) ||
+ (lro->tcph->dest != tcp->dest))
return -1;
return 0;
}
static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
{
- return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
+ return ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2);
}
static void initiate_new_session(struct lro *lro, u8 *l2h,
- struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag)
+ struct iphdr *ip, struct tcphdr *tcp,
+ u32 tcp_pyld_len, u16 vlan_tag)
{
- DBG_PRINT(INFO_DBG,"%s: Been here...\n", __func__);
+ DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
lro->l2h = l2h;
lro->iph = ip;
lro->tcph = tcp;
@@ -8351,9 +8378,9 @@
lro->frags_len = 0;
lro->vlan_tag = vlan_tag;
/*
- * check if we saw TCP timestamp. Other consistency checks have
- * already been done.
- */
+ * Check if we saw TCP timestamp.
+ * Other consistency checks have already been done.
+ */
if (tcp->doff == 8) {
__be32 *ptr;
ptr = (__be32 *)(tcp+1);
@@ -8369,8 +8396,9 @@
struct iphdr *ip = lro->iph;
struct tcphdr *tcp = lro->tcph;
__sum16 nchk;
- struct stat_block *statinfo = sp->mac_control.stats_info;
- DBG_PRINT(INFO_DBG,"%s: Been here...\n", __func__);
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
+
+ DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
/* Update L3 header */
ip->tot_len = htons(lro->total_len);
@@ -8391,14 +8419,14 @@
/* Update counters required for calculation of
* average no. of packets aggregated.
*/
- statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
- statinfo->sw_stat.num_aggregations++;
+ swstats->sum_avg_pkts_aggregated += lro->sg_num;
+ swstats->num_aggregations++;
}
static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
- struct tcphdr *tcp, u32 l4_pyld)
+ struct tcphdr *tcp, u32 l4_pyld)
{
- DBG_PRINT(INFO_DBG,"%s: Been here...\n", __func__);
+ DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
lro->total_len += l4_pyld;
lro->frags_len += l4_pyld;
lro->tcp_next_seq += l4_pyld;
@@ -8422,7 +8450,7 @@
{
u8 *ptr;
- DBG_PRINT(INFO_DBG,"%s: Been here...\n", __func__);
+ DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
if (!tcp_pyld_len) {
/* Runt frame or a pure ack */
@@ -8437,8 +8465,9 @@
return -1;
/* If we see ECE or CWR flags in TCP header, packet is not mergeable */
- if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
- tcp->ece || tcp->cwr || !tcp->ack) {
+ if (tcp->urg || tcp->psh || tcp->rst ||
+ tcp->syn || tcp->fin ||
+ tcp->ece || tcp->cwr || !tcp->ack) {
/*
* Currently recognize only the ack control word and
* any other control field being set would result in
@@ -8474,27 +8503,27 @@
return 0;
}
-static int
-s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer, u8 **tcp,
- u32 *tcp_len, struct lro **lro, struct RxD_t *rxdp,
- struct s2io_nic *sp)
+static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
+ u8 **tcp, u32 *tcp_len, struct lro **lro,
+ struct RxD_t *rxdp, struct s2io_nic *sp)
{
struct iphdr *ip;
struct tcphdr *tcph;
int ret = 0, i;
u16 vlan_tag = 0;
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
- if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
- rxdp, sp))) {
- DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
- ip->saddr, ip->daddr);
- } else
+ ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
+ rxdp, sp);
+ if (ret)
return ret;
+ DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr);
+
vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
tcph = (struct tcphdr *)*tcp;
*tcp_len = get_l4_pyld_length(ip, tcph);
- for (i=0; i<MAX_LRO_SESSIONS; i++) {
+ for (i = 0; i < MAX_LRO_SESSIONS; i++) {
struct lro *l_lro = &ring_data->lro0_n[i];
if (l_lro->in_use) {
if (check_for_socket_match(l_lro, ip, tcph))
@@ -8503,18 +8532,19 @@
*lro = l_lro;
if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
- DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
- "0x%x, actual 0x%x\n", __func__,
+ DBG_PRINT(INFO_DBG, "%s: Out of sequence. "
+ "expected 0x%x, actual 0x%x\n",
+ __func__,
(*lro)->tcp_next_seq,
ntohl(tcph->seq));
- sp->mac_control.stats_info->
- sw_stat.outof_sequence_pkts++;
+ swstats->outof_sequence_pkts++;
ret = 2;
break;
}
- if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
+ if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,
+ *tcp_len))
ret = 1; /* Aggregate */
else
ret = 2; /* Flush both */
@@ -8528,11 +8558,10 @@
* don't create new LRO session. Just send this
* packet up.
*/
- if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
+ if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len))
return 5;
- }
- for (i=0; i<MAX_LRO_SESSIONS; i++) {
+ for (i = 0; i < MAX_LRO_SESSIONS; i++) {
struct lro *l_lro = &ring_data->lro0_n[i];
if (!(l_lro->in_use)) {
*lro = l_lro;
@@ -8543,31 +8572,30 @@
}
if (ret == 0) { /* sessions exceeded */
- DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
+ DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n",
__func__);
*lro = NULL;
return ret;
}
switch (ret) {
- case 3:
- initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
- vlan_tag);
- break;
- case 2:
+ case 3:
+ initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
+ vlan_tag);
+ break;
+ case 2:
+ update_L3L4_header(sp, *lro);
+ break;
+ case 1:
+ aggregate_new_rx(*lro, ip, tcph, *tcp_len);
+ if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
update_L3L4_header(sp, *lro);
- break;
- case 1:
- aggregate_new_rx(*lro, ip, tcph, *tcp_len);
- if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
- update_L3L4_header(sp, *lro);
- ret = 4; /* Flush the LRO */
- }
- break;
- default:
- DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
- __func__);
- break;
+ ret = 4; /* Flush the LRO */
+ }
+ break;
+ default:
+ DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);
+ break;
}
return ret;
@@ -8586,8 +8614,7 @@
struct s2io_nic *sp = netdev_priv(dev);
skb->protocol = eth_type_trans(skb, dev);
- if (sp->vlgrp && vlan_tag
- && (sp->vlan_strip_flag)) {
+ if (sp->vlgrp && vlan_tag && (sp->vlan_strip_flag)) {
/* Queueing the vlan frame to the upper layer */
if (sp->config.napi)
vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
@@ -8602,10 +8629,10 @@
}
static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
- struct sk_buff *skb,
- u32 tcp_len)
+ struct sk_buff *skb, u32 tcp_len)
{
struct sk_buff *first = lro->parent;
+ struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
first->len += tcp_len;
first->data_len = lro->frags_len;
@@ -8616,7 +8643,7 @@
skb_shinfo(first)->frag_list = skb;
first->truesize += skb->truesize;
lro->last_frag = skb;
- sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
+ swstats->clubbed_frms_cnt++;
return;
}
@@ -8629,13 +8656,16 @@
* this device has been detected.
*/
static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
+ pci_channel_state_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct s2io_nic *sp = netdev_priv(netdev);
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev)) {
/* Bring down the card, while avoiding PCI I/O */
do_s2io_card_down(sp, 0);
@@ -8660,8 +8690,7 @@
struct s2io_nic *sp = netdev_priv(netdev);
if (pci_enable_device(pdev)) {
- printk(KERN_ERR "s2io: "
- "Cannot re-enable PCI device after reset.\n");
+ pr_err("Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
@@ -8685,15 +8714,13 @@
if (netif_running(netdev)) {
if (s2io_card_up(sp)) {
- printk(KERN_ERR "s2io: "
- "Can't bring device back up after reset.\n");
+ pr_err("Can't bring device back up after reset.\n");
return;
}
if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
s2io_card_down(sp);
- printk(KERN_ERR "s2io: "
- "Can't resetore mac addr after reset.\n");
+ pr_err("Can't restore mac addr after reset.\n");
return;
}
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index d5c5be6..47c36e0 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -64,7 +64,10 @@
static int debug_level = ERR_DBG;
/* DEBUG message print. */
-#define DBG_PRINT(dbg_level, args...) if(!(debug_level<dbg_level)) printk(args)
+#define DBG_PRINT(dbg_level, fmt, args...) do { \
+ if (dbg_level >= debug_level) \
+ pr_info(fmt, ##args); \
+ } while (0)
/* Protocol assist features of the NIC */
#define L3_CKSUM_OK 0xFFFF
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index fc0e38b..ee366c5 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -82,7 +82,8 @@
extern int sb1000_probe(struct net_device *dev);
static int sb1000_open(struct net_device *dev);
static int sb1000_dev_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd);
-static int sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t sb1000_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t sb1000_interrupt(int irq, void *dev_id);
static int sb1000_close(struct net_device *dev);
@@ -1080,13 +1081,13 @@
}
/* transmit function: do nothing since SB1000 can't send anything out */
-static int
+static netdev_tx_t
sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
printk(KERN_WARNING "%s: trying to transmit!!!\n", dev->name);
/* sb1000 can't xmit datagrams */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* SB1000 interrupt handler. */
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index d8c9cf1..508551f 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -2091,7 +2091,7 @@
spin_unlock_irqrestore(&sc->sbm_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/**********************************************************************
@@ -2688,7 +2688,7 @@
}
-static int __init sbmac_probe(struct platform_device *pldev)
+static int __devinit sbmac_probe(struct platform_device *pldev)
{
struct net_device *dev;
struct sbmac_softc *sc;
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index e3156c9..8d60300 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -941,7 +941,8 @@
return &dev->stats;
}
-static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sc92031_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct sc92031_priv *priv = netdev_priv(dev);
void __iomem *port_base = priv->port_base;
diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index ebbbe09..39246d4 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -81,7 +81,8 @@
static int seeq8005_probe1(struct net_device *dev, int ioaddr);
static int seeq8005_open(struct net_device *dev);
static void seeq8005_timeout(struct net_device *dev);
-static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t seeq8005_interrupt(int irq, void *dev_id);
static void seeq8005_rx(struct net_device *dev);
static int seeq8005_close(struct net_device *dev);
@@ -394,14 +395,15 @@
netif_wake_queue(dev);
}
-static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
short length = skb->len;
unsigned char *buf;
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
buf = skb->data;
@@ -415,7 +417,7 @@
dev_kfree_skb (skb);
/* You might need to clean up and record Tx statistics here. */
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 343e8da1..07a7e4b 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1179,6 +1179,8 @@
/* Isolate the MAC from the TX and RX engines, so that queue
* flushes will complete in a timely fashion. */
+ falcon_deconfigure_mac_wrapper(efx);
+ msleep(10); /* Let the Rx FIFO drain */
falcon_drain_tx_fifo(efx);
/* Stop the kernel transmit interface late, so the watchdog
@@ -1614,21 +1616,24 @@
SET_NETDEV_DEV(net_dev, &efx->pci_dev->dev);
SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops);
- /* Always start with carrier off; PHY events will detect the link */
- netif_carrier_off(efx->net_dev);
-
/* Clear MAC statistics */
efx->mac_op->update_stats(efx);
memset(&efx->mac_stats, 0, sizeof(efx->mac_stats));
- rc = register_netdev(net_dev);
- if (rc) {
- EFX_ERR(efx, "could not register net dev\n");
- return rc;
- }
-
rtnl_lock();
+
+ rc = dev_alloc_name(net_dev, net_dev->name);
+ if (rc < 0)
+ goto fail_locked;
efx_update_name(efx);
+
+ rc = register_netdevice(net_dev);
+ if (rc)
+ goto fail_locked;
+
+ /* Always start with carrier off; PHY events will detect the link */
+ netif_carrier_off(efx->net_dev);
+
rtnl_unlock();
rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_type);
@@ -1639,6 +1644,11 @@
return 0;
+fail_locked:
+ rtnl_unlock();
+ EFX_ERR(efx, "could not register net dev\n");
+ return rc;
+
fail_registered:
unregister_netdev(net_dev);
return rc;
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index da157aa..aecaf62 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -20,8 +20,9 @@
#define FALCON_B_P_DEVID 0x0710
/* TX */
-extern int efx_xmit(struct efx_nic *efx,
- struct efx_tx_queue *tx_queue, struct sk_buff *skb);
+extern netdev_tx_t efx_xmit(struct efx_nic *efx,
+ struct efx_tx_queue *tx_queue,
+ struct sk_buff *skb);
extern void efx_stop_queue(struct efx_nic *efx);
extern void efx_wake_queue(struct efx_nic *efx);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 997ea2a..45018f2 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -731,7 +731,7 @@
}
-struct ethtool_ops efx_ethtool_ops = {
+const struct ethtool_ops efx_ethtool_ops = {
.get_settings = efx_ethtool_get_settings,
.set_settings = efx_ethtool_set_settings,
.get_drvinfo = efx_ethtool_get_drvinfo,
diff --git a/drivers/net/sfc/ethtool.h b/drivers/net/sfc/ethtool.h
index 3628e43..295ead4 100644
--- a/drivers/net/sfc/ethtool.h
+++ b/drivers/net/sfc/ethtool.h
@@ -22,6 +22,6 @@
extern int efx_ethtool_set_settings(struct net_device *net_dev,
struct ethtool_cmd *ecmd);
-extern struct ethtool_ops efx_ethtool_ops;
+extern const struct ethtool_ops efx_ethtool_ops;
#endif /* EFX_ETHTOOL_H */
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
index 375e2a5..2d22611 100644
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -700,6 +700,8 @@
/* XGXS/XAUI powerdown/reset register */
#define XX_PWR_RST_REG 0x1300
+#define XX_SD_RST_ACT_LBN 16
+#define XX_SD_RST_ACT_WIDTH 1
#define XX_PWRDND_EN_LBN 15
#define XX_PWRDND_EN_WIDTH 1
#define XX_PWRDNC_EN_LBN 14
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 2b3269c..bec52ca 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -64,13 +64,15 @@
efx_oword_t reg;
int count;
+ /* Start reset sequence */
EFX_POPULATE_DWORD_1(reg, XX_RST_XX_EN, 1);
falcon_write(efx, ®, XX_PWR_RST_REG);
- /* Give some time for the link to establish */
- for (count = 0; count < 1000; count++) { /* wait upto 10ms */
+ /* Wait up to 10 ms for completion, then reinitialise */
+ for (count = 0; count < 1000; count++) {
falcon_read(efx, ®, XX_PWR_RST_REG);
- if (EFX_OWORD_FIELD(reg, XX_RST_XX_EN) == 0) {
+ if (EFX_OWORD_FIELD(reg, XX_RST_XX_EN) == 0 &&
+ EFX_OWORD_FIELD(reg, XX_SD_RST_ACT) == 0) {
falcon_setup_xaui(efx);
return 0;
}
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 5eabede..298566d 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -984,9 +984,14 @@
*
* The 10G MAC used in Falcon requires 8-byte alignment on the frame
* length, so we round up to the nearest 8.
+ *
+ * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an
+ * XGMII cycle). If the frame length reaches the maximum value in the
+ * same cycle, the XMAC can miss the IPG altogether. We work around
+ * this by adding a further 16 bytes.
*/
#define EFX_MAX_FRAME_LEN(mtu) \
- ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */) + 7) & ~7)
+ ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16)
#endif /* EFX_NET_DRIVER_H */
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index b67ccca..817c7ef 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -400,7 +400,8 @@
struct efx_loopback_state *state = efx->loopback_selftest;
struct efx_loopback_payload *payload;
struct sk_buff *skb;
- int i, rc;
+ int i;
+ netdev_tx_t rc;
/* Transmit N copies of buffer */
for (i = 0; i < state->packet_count; i++) {
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 14a1478..489c4de 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -138,8 +138,8 @@
* Returns NETDEV_TX_OK or NETDEV_TX_BUSY
* You must hold netif_tx_lock() to call this function.
*/
-static int efx_enqueue_skb(struct efx_tx_queue *tx_queue,
- struct sk_buff *skb)
+static netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue,
+ struct sk_buff *skb)
{
struct efx_nic *efx = tx_queue->efx;
struct pci_dev *pci_dev = efx->pci_dev;
@@ -152,7 +152,7 @@
unsigned int dma_len;
bool unmap_single;
int q_space, i = 0;
- int rc = NETDEV_TX_OK;
+ netdev_tx_t rc = NETDEV_TX_OK;
EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count);
@@ -353,14 +353,11 @@
*
* Context: netif_tx_lock held
*/
-inline int efx_xmit(struct efx_nic *efx,
- struct efx_tx_queue *tx_queue, struct sk_buff *skb)
+inline netdev_tx_t efx_xmit(struct efx_nic *efx,
+ struct efx_tx_queue *tx_queue, struct sk_buff *skb)
{
- int rc;
-
/* Map fragments for DMA and add to TX queue */
- rc = efx_enqueue_skb(tx_queue, skb);
- return rc;
+ return efx_enqueue_skb(tx_queue, skb);
}
/* Initiate a packet transmission. We use one channel per CPU
@@ -372,7 +369,8 @@
* Note that returning anything other than NETDEV_TX_OK will cause the
* OS to free the skb.
*/
-int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev)
{
struct efx_nic *efx = netdev_priv(net_dev);
struct efx_tx_queue *tx_queue;
diff --git a/drivers/net/sfc/tx.h b/drivers/net/sfc/tx.h
index 5e1cc23..e367896 100644
--- a/drivers/net/sfc/tx.h
+++ b/drivers/net/sfc/tx.h
@@ -18,7 +18,8 @@
void efx_init_tx_queue(struct efx_tx_queue *tx_queue);
void efx_fini_tx_queue(struct efx_tx_queue *tx_queue);
-int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev);
+netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev);
void efx_release_tx_buffers(struct efx_tx_queue *tx_queue);
#endif /* EFX_TX_H */
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index bb2e6af..e6b3d5e 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -97,23 +97,24 @@
return 0;
}
-/* Reset the PHYXS MMD. This is documented (for the Quake PHYs) as doing
- * a complete soft reset.
- */
static int xfp_reset_phy(struct efx_nic *efx)
{
int rc;
- rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
- XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
- XFP_RESET_WAIT);
- if (rc < 0)
- goto fail;
-
if (efx->phy_type == PHY_TYPE_QT2025C) {
+ /* Wait for the reset triggered by falcon_reset_hw()
+ * to complete */
rc = qt2025c_wait_reset(efx);
if (rc < 0)
goto fail;
+ } else {
+ /* Reset the PHYXS MMD. This is documented as doing
+ * a complete soft reset. */
+ rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
+ XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
+ XFP_RESET_WAIT);
+ if (rc < 0)
+ goto fail;
}
/* Wait 250ms for the PHY to complete bootup */
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 5fb88ca..ecf3279f 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -594,7 +594,7 @@
len = skb->len;
if (len < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
len = ETH_ZLEN;
}
@@ -642,7 +642,7 @@
netif_stop_queue(dev);
spin_unlock_irqrestore(&sp->tx_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static void timeout(struct net_device *dev)
@@ -720,7 +720,7 @@
.ndo_validate_addr = eth_validate_addr,
};
-static int __init sgiseeq_probe(struct platform_device *pdev)
+static int __devinit sgiseeq_probe(struct platform_device *pdev)
{
struct sgiseeq_platform_data *pd = pdev->dev.platform_data;
struct hpc3_regs *hpcregs = pd->hpc;
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index a2d82dd..f49d0800 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -772,13 +772,15 @@
mdp->stats.tx_carrier_errors++;
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
- if (mdp->cd->no_psr) {
+ if (mdp->cd->no_psr || mdp->no_ether_link) {
if (mdp->link == PHY_DOWN)
link_stat = 0;
else
link_stat = PHY_ST_LINK;
} else {
link_stat = (ctrl_inl(ioaddr + PSR));
+ if (mdp->ether_link_active_low)
+ link_stat = ~link_stat;
}
if (!(link_stat & PHY_ST_LINK)) {
/* Link Down : disable tx and rx */
@@ -1133,7 +1135,7 @@
ndev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* device close function */
@@ -1410,6 +1412,8 @@
mdp->phy_id = pd->phy;
/* EDMAC endian */
mdp->edmac_endian = pd->edmac_endian;
+ mdp->no_ether_link = pd->no_ether_link;
+ mdp->ether_link_active_low = pd->ether_link_active_low;
/* set cpu data */
mdp->cd = &sh_eth_my_cpu_data;
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 9afe5b4..ba151f8 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -729,6 +729,9 @@
char post_rx; /* POST receive */
char post_fw; /* POST forward */
struct net_device_stats tsu_stats; /* TSU forward status */
+
+ unsigned no_ether_link:1;
+ unsigned ether_link_active_low:1;
};
static inline void sh_eth_soft_swap(char *src, int len)
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 1f040e8..7cc9898 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1168,7 +1168,8 @@
return 0;
}
-static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct sis190_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index a9a897bb..97949d0 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -214,7 +214,8 @@
static void sis900_tx_timeout(struct net_device *net_dev);
static void sis900_init_tx_ring(struct net_device *net_dev);
static void sis900_init_rx_ring(struct net_device *net_dev);
-static int sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev);
+static netdev_tx_t sis900_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev);
static int sis900_rx(struct net_device *net_dev);
static void sis900_finish_xmit (struct net_device *net_dev);
static irqreturn_t sis900_interrupt(int irq, void *dev_instance);
@@ -1571,7 +1572,7 @@
* tell upper layer if the buffer is full
*/
-static int
+static netdev_tx_t
sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
@@ -1628,7 +1629,7 @@
"to slot %d.\n",
net_dev->name, skb->data, (int)skb->len, entry);
- return 0;
+ return NETDEV_TX_OK;
}
/**
@@ -2127,8 +2128,6 @@
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
mdio_write(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
return 0;
default:
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 088fe26..38a508b 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -107,7 +107,8 @@
static void skfp_ctl_set_multicast_list_wo_lock(struct net_device *dev);
static int skfp_ctl_set_mac_address(struct net_device *dev, void *addr);
static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int skfp_send_pkt(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
+ struct net_device *dev);
static void send_queued_packets(struct s_smc *smc);
static void CheckSourceAddress(unsigned char *frame, unsigned char *hw_addr);
static void ResetAdapter(struct s_smc *smc);
@@ -1056,7 +1057,8 @@
* Side Effects:
* None
*/
-static int skfp_send_pkt(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t skfp_send_pkt(struct sk_buff *skb,
+ struct net_device *dev)
{
struct s_smc *smc = netdev_priv(dev);
skfddi_priv *bp = &smc->os;
@@ -1077,7 +1079,7 @@
// dequeue packets from xmt queue and send them
netif_start_queue(dev);
dev_kfree_skb(skb);
- return (0); /* return "success" */
+ return NETDEV_TX_OK; /* return "success" */
}
if (bp->QueueSkb == 0) { // return with tbusy set: queue full
@@ -1091,7 +1093,7 @@
netif_stop_queue(dev);
}
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
} // skfp_send_pkt
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 543af20..62e852e 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2496,9 +2496,6 @@
}
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS)
err = xm_phy_write(hw, skge->port, data->reg_num & 0x1f,
@@ -2746,7 +2743,8 @@
+ (ring->to_clean - ring->to_use) - 1;
}
-static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
+ struct net_device *dev)
{
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 0a551d8..00bc65a 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.23"
+#define DRV_VERSION "1.25"
#define PFX DRV_NAME " "
/*
@@ -64,10 +64,12 @@
#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
#define RX_DEF_PENDING RX_MAX_PENDING
-#define TX_RING_SIZE 512
-#define TX_DEF_PENDING 128
-#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
+/* This is the worst case number of transmit list elements for a single skb:
+ VLAN + TSO + CKSUM + Data + skb_frags * DMA */
+#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
#define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
+#define TX_MAX_PENDING 4096
+#define TX_DEF_PENDING 127
#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
@@ -254,6 +256,9 @@
sky2_read32(hw, B2_GP_IO);
}
+
+ /* Turn on "driver loaded" LED */
+ sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
}
static void sky2_power_aux(struct sky2_hw *hw)
@@ -267,11 +272,15 @@
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
- /* switch power to VAUX */
- if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
+ /* switch power to VAUX if supported and PME from D3cold */
+ if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
+ pci_pme_capable(hw->pdev, PCI_D3cold))
sky2_write8(hw, B0_POWER_CTRL,
(PC_VAUX_ENA | PC_VCC_ENA |
PC_VAUX_ON | PC_VCC_OFF));
+
+ /* turn off "driver loaded LED" */
+ sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
}
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
@@ -321,7 +330,7 @@
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
- if (sky2->autoneg == AUTONEG_ENABLE &&
+ if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
!(hw->flags & SKY2_HW_NEWER_PHY)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
@@ -363,7 +372,7 @@
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
/* downshift on PHY 88E1112 and 88E1149 is changed */
- if (sky2->autoneg == AUTONEG_ENABLE
+ if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED)
&& (hw->flags & SKY2_HW_NEWER_PHY)) {
/* set downshift counter to 3x and enable downshift */
ctrl &= ~PHY_M_PC_DSC_MSK;
@@ -408,7 +417,7 @@
adv = PHY_AN_CSMA;
reg = 0;
- if (sky2->autoneg == AUTONEG_ENABLE) {
+ if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
if (sky2_is_copper(hw)) {
if (sky2->advertising & ADVERTISED_1000baseT_Full)
ct1000 |= PHY_M_1000C_AFD;
@@ -423,14 +432,11 @@
if (sky2->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD;
- adv |= copper_fc_adv[sky2->flow_mode];
} else { /* special defines for FIBER (88E1040S only) */
if (sky2->advertising & ADVERTISED_1000baseT_Full)
adv |= PHY_M_AN_1000X_AFD;
if (sky2->advertising & ADVERTISED_1000baseT_Half)
adv |= PHY_M_AN_1000X_AHD;
-
- adv |= fiber_fc_adv[sky2->flow_mode];
}
/* Restart Auto-negotiation */
@@ -439,8 +445,8 @@
/* forced speed/duplex settings */
ct1000 = PHY_M_1000C_MSE;
- /* Disable auto update for duplex flow control and speed */
- reg |= GM_GPCR_AU_ALL_DIS;
+ /* Disable auto update for duplex flow control and duplex */
+ reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
switch (sky2->speed) {
case SPEED_1000:
@@ -458,8 +464,15 @@
ctrl |= PHY_CT_DUP_MD;
} else if (sky2->speed < SPEED_1000)
sky2->flow_mode = FC_NONE;
+ }
-
+ if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
+ if (sky2_is_copper(hw))
+ adv |= copper_fc_adv[sky2->flow_mode];
+ else
+ adv |= fiber_fc_adv[sky2->flow_mode];
+ } else {
+ reg |= GM_GPCR_AU_FCT_DIS;
reg |= gm_fc_disable[sky2->flow_mode];
/* Forward pause packets to GMAC? */
@@ -594,7 +607,8 @@
/* no effect on Yukon-XL */
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
- if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+ if ( !(sky2->flags & SKY2_FLAG_AUTO_SPEED)
+ || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
@@ -605,7 +619,7 @@
}
/* Enable phy interrupt on auto-negotiation complete (or link up) */
- if (sky2->autoneg == AUTONEG_ENABLE)
+ if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
else
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
@@ -661,7 +675,9 @@
/* setup General Purpose Control Register */
gma_write16(hw, port, GM_GP_CTRL,
- GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
+ GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
+ GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
+ GM_GPCR_AU_SPD_DIS);
if (hw->chip_id != CHIP_ID_YUKON_EC) {
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
@@ -977,23 +993,26 @@
* hardware and driver list elements
*/
static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
- u64 addr, u32 last)
+ dma_addr_t addr, u32 last)
{
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
- sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
- sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
+ sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
}
-static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
+static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
{
- struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
+ struct sky2_tx_le *le = sky2->tx_le + *slot;
+ struct tx_ring_info *re = sky2->tx_ring + *slot;
- sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
+ *slot = RING_NEXT(*slot, sky2->tx_ring_size);
+ re->flags = 0;
+ re->skb = NULL;
le->ctrl = 0;
return le;
}
@@ -1006,15 +1025,10 @@
sky2->tx_tcpsum = 0;
sky2->tx_last_mss = 0;
- le = get_tx_le(sky2);
+ le = get_tx_le(sky2, &sky2->tx_prod);
le->addr = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
-}
-
-static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
- struct sky2_tx_le *le)
-{
- return sky2->tx_ring + (le - sky2->tx_le);
+ sky2->tx_last_upper = 0;
}
/* Update chip's next pointer */
@@ -1050,7 +1064,7 @@
}
le = sky2_next_rx(sky2);
- le->addr = cpu_to_le32((u32) map);
+ le->addr = cpu_to_le32(lower_32_bits(map));
le->length = cpu_to_le16(len);
le->opcode = op | HW_OWNER;
}
@@ -1117,7 +1131,8 @@
sky2_write32(sky2->hw,
Q_ADDR(rxqaddr[sky2->port], Q_CSR),
- sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+ (sky2->flags & SKY2_FLAG_RX_CHECKSUM)
+ ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
/*
@@ -1169,7 +1184,6 @@
re->skb = NULL;
}
}
- skb_queue_purge(&sky2->rx_recycle);
}
/* Basic MII support */
@@ -1200,9 +1214,6 @@
}
case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
spin_lock_bh(&sky2->phy_lock);
err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
data->val_in);
@@ -1261,10 +1272,8 @@
struct sk_buff *skb;
int i;
- skb = __skb_dequeue(&sky2->rx_recycle);
- if (!skb)
- skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size
- + sky2_rx_pad(sky2->hw));
+ skb = netdev_alloc_skb(sky2->netdev,
+ sky2->rx_data_size + sky2_rx_pad(sky2->hw));
if (!skb)
goto nomem;
@@ -1356,8 +1365,6 @@
sky2->rx_data_size = size;
- skb_queue_head_init(&sky2->rx_recycle);
-
/* Fill Rx ring */
for (i = 0; i < sky2->rx_pending; i++) {
re = sky2->rx_ring + i;
@@ -1396,6 +1403,61 @@
return -ENOMEM;
}
+static int sky2_alloc_buffers(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+
+ /* must be power of 2 */
+ sky2->tx_le = pci_alloc_consistent(hw->pdev,
+ sky2->tx_ring_size *
+ sizeof(struct sky2_tx_le),
+ &sky2->tx_le_map);
+ if (!sky2->tx_le)
+ goto nomem;
+
+ sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info),
+ GFP_KERNEL);
+ if (!sky2->tx_ring)
+ goto nomem;
+
+ sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
+ &sky2->rx_le_map);
+ if (!sky2->rx_le)
+ goto nomem;
+ memset(sky2->rx_le, 0, RX_LE_BYTES);
+
+ sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
+ GFP_KERNEL);
+ if (!sky2->rx_ring)
+ goto nomem;
+
+ return 0;
+nomem:
+ return -ENOMEM;
+}
+
+static void sky2_free_buffers(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+
+ if (sky2->rx_le) {
+ pci_free_consistent(hw->pdev, RX_LE_BYTES,
+ sky2->rx_le, sky2->rx_le_map);
+ sky2->rx_le = NULL;
+ }
+ if (sky2->tx_le) {
+ pci_free_consistent(hw->pdev,
+ sky2->tx_ring_size * sizeof(struct sky2_tx_le),
+ sky2->tx_le, sky2->tx_le_map);
+ sky2->tx_le = NULL;
+ }
+ kfree(sky2->tx_ring);
+ kfree(sky2->rx_ring);
+
+ sky2->tx_ring = NULL;
+ sky2->rx_ring = NULL;
+}
+
/* Bring up network interface. */
static int sky2_up(struct net_device *dev)
{
@@ -1403,7 +1465,7 @@
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
u32 imask, ramsize;
- int cap, err = -ENOMEM;
+ int cap, err;
struct net_device *otherdev = hw->dev[sky2->port^1];
/*
@@ -1422,32 +1484,12 @@
netif_carrier_off(dev);
- /* must be power of 2 */
- sky2->tx_le = pci_alloc_consistent(hw->pdev,
- TX_RING_SIZE *
- sizeof(struct sky2_tx_le),
- &sky2->tx_le_map);
- if (!sky2->tx_le)
- goto err_out;
-
- sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
- GFP_KERNEL);
- if (!sky2->tx_ring)
+ err = sky2_alloc_buffers(sky2);
+ if (err)
goto err_out;
tx_init(sky2);
- sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
- &sky2->rx_le_map);
- if (!sky2->rx_le)
- goto err_out;
- memset(sky2->rx_le, 0, RX_LE_BYTES);
-
- sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
- GFP_KERNEL);
- if (!sky2->rx_ring)
- goto err_out;
-
sky2_mac_init(hw, port);
/* Register is number of 4K blocks on internal RAM buffer. */
@@ -1482,14 +1524,12 @@
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
- TX_RING_SIZE - 1);
+ sky2->tx_ring_size - 1);
#ifdef SKY2_VLAN_TAG_USED
sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
#endif
- sky2->restarting = 0;
-
err = sky2_rx_start(sky2);
if (err)
goto err_out;
@@ -1500,47 +1540,26 @@
sky2_write32(hw, B0_IMSK, imask);
sky2_read32(hw, B0_IMSK);
- sky2_set_multicast(dev);
-
- /* wake queue incase we are restarting */
- netif_wake_queue(dev);
-
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
+
return 0;
err_out:
- if (sky2->rx_le) {
- pci_free_consistent(hw->pdev, RX_LE_BYTES,
- sky2->rx_le, sky2->rx_le_map);
- sky2->rx_le = NULL;
- }
- if (sky2->tx_le) {
- pci_free_consistent(hw->pdev,
- TX_RING_SIZE * sizeof(struct sky2_tx_le),
- sky2->tx_le, sky2->tx_le_map);
- sky2->tx_le = NULL;
- }
- kfree(sky2->tx_ring);
- kfree(sky2->rx_ring);
-
- sky2->tx_ring = NULL;
- sky2->rx_ring = NULL;
+ sky2_free_buffers(sky2);
return err;
}
/* Modular subtraction in ring */
-static inline int tx_dist(unsigned tail, unsigned head)
+static inline int tx_inuse(const struct sky2_port *sky2)
{
- return (head - tail) & (TX_RING_SIZE - 1);
+ return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
}
/* Number of list elements available for next tx */
static inline int tx_avail(const struct sky2_port *sky2)
{
- if (unlikely(sky2->restarting))
- return 0;
- return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
+ return sky2->tx_pending - tx_inuse(sky2);
}
/* Estimate of number of transmit list elements required */
@@ -1560,20 +1579,36 @@
return count;
}
+static void sky2_tx_unmap(struct pci_dev *pdev,
+ const struct tx_ring_info *re)
+{
+ if (re->flags & TX_MAP_SINGLE)
+ pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
+ pci_unmap_len(re, maplen),
+ PCI_DMA_TODEVICE);
+ else if (re->flags & TX_MAP_PAGE)
+ pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
+ pci_unmap_len(re, maplen),
+ PCI_DMA_TODEVICE);
+}
+
/*
* Put one packet in ring for transmit.
* A single packet can generate multiple list elements, and
* the number of ring elements will probably be less than the number
* of list elements used.
*/
-static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
+ struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
struct sky2_tx_le *le = NULL;
struct tx_ring_info *re;
- unsigned i, len, first_slot;
+ unsigned i, len;
dma_addr_t mapping;
+ u32 upper;
+ u16 slot;
u16 mss;
u8 ctrl;
@@ -1586,15 +1621,17 @@
if (pci_dma_mapping_error(hw->pdev, mapping))
goto mapping_error;
- first_slot = sky2->tx_prod;
+ slot = sky2->tx_prod;
if (unlikely(netif_msg_tx_queued(sky2)))
printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
- dev->name, first_slot, skb->len);
+ dev->name, slot, skb->len);
/* Send high bits if needed */
- if (sizeof(dma_addr_t) > sizeof(u32)) {
- le = get_tx_le(sky2);
- le->addr = cpu_to_le32(upper_32_bits(mapping));
+ upper = upper_32_bits(mapping);
+ if (upper != sky2->tx_last_upper) {
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(upper);
+ sky2->tx_last_upper = upper;
le->opcode = OP_ADDR64 | HW_OWNER;
}
@@ -1606,7 +1643,7 @@
mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
if (mss != sky2->tx_last_mss) {
- le = get_tx_le(sky2);
+ le = get_tx_le(sky2, &slot);
le->addr = cpu_to_le32(mss);
if (hw->flags & SKY2_HW_NEW_LE)
@@ -1622,7 +1659,7 @@
/* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
if (!le) {
- le = get_tx_le(sky2);
+ le = get_tx_le(sky2, &slot);
le->addr = 0;
le->opcode = OP_VLAN|HW_OWNER;
} else
@@ -1651,7 +1688,7 @@
if (tcpsum != sky2->tx_tcpsum) {
sky2->tx_tcpsum = tcpsum;
- le = get_tx_le(sky2);
+ le = get_tx_le(sky2, &slot);
le->addr = cpu_to_le32(tcpsum);
le->length = 0; /* initial checksum value */
le->ctrl = 1; /* one packet */
@@ -1660,16 +1697,17 @@
}
}
- le = get_tx_le(sky2);
- le->addr = cpu_to_le32((u32) mapping);
+ re = sky2->tx_ring + slot;
+ re->flags = TX_MAP_SINGLE;
+ pci_unmap_addr_set(re, mapaddr, mapping);
+ pci_unmap_len_set(re, maplen, len);
+
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(lower_32_bits(mapping));
le->length = cpu_to_le16(len);
le->ctrl = ctrl;
le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
- re = tx_le_re(sky2, le);
- re->skb = skb;
- pci_unmap_addr_set(re, mapaddr, mapping);
- pci_unmap_len_set(re, maplen, len);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
@@ -1680,27 +1718,31 @@
if (pci_dma_mapping_error(hw->pdev, mapping))
goto mapping_unwind;
- if (sizeof(dma_addr_t) > sizeof(u32)) {
- le = get_tx_le(sky2);
- le->addr = cpu_to_le32(upper_32_bits(mapping));
- le->ctrl = 0;
+ upper = upper_32_bits(mapping);
+ if (upper != sky2->tx_last_upper) {
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(upper);
+ sky2->tx_last_upper = upper;
le->opcode = OP_ADDR64 | HW_OWNER;
}
- le = get_tx_le(sky2);
- le->addr = cpu_to_le32((u32) mapping);
+ re = sky2->tx_ring + slot;
+ re->flags = TX_MAP_PAGE;
+ pci_unmap_addr_set(re, mapaddr, mapping);
+ pci_unmap_len_set(re, maplen, frag->size);
+
+ le = get_tx_le(sky2, &slot);
+ le->addr = cpu_to_le32(lower_32_bits(mapping));
le->length = cpu_to_le16(frag->size);
le->ctrl = ctrl;
le->opcode = OP_BUFFER | HW_OWNER;
-
- re = tx_le_re(sky2, le);
- re->skb = skb;
- pci_unmap_addr_set(re, mapaddr, mapping);
- pci_unmap_len_set(re, maplen, frag->size);
}
+ re->skb = skb;
le->ctrl |= EOP;
+ sky2->tx_prod = slot;
+
if (tx_avail(sky2) <= MAX_SKB_TX_LE)
netif_stop_queue(dev);
@@ -1709,27 +1751,12 @@
return NETDEV_TX_OK;
mapping_unwind:
- for (i = first_slot; i != sky2->tx_prod; i = RING_NEXT(i, TX_RING_SIZE)) {
- le = sky2->tx_le + i;
+ for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
re = sky2->tx_ring + i;
- switch(le->opcode & ~HW_OWNER) {
- case OP_LARGESEND:
- case OP_PACKET:
- pci_unmap_single(hw->pdev,
- pci_unmap_addr(re, mapaddr),
- pci_unmap_len(re, maplen),
- PCI_DMA_TODEVICE);
- break;
- case OP_BUFFER:
- pci_unmap_page(hw->pdev, pci_unmap_addr(re, mapaddr),
- pci_unmap_len(re, maplen),
- PCI_DMA_TODEVICE);
- break;
- }
+ sky2_tx_unmap(hw->pdev, re);
}
- sky2->tx_prod = first_slot;
mapping_error:
if (net_ratelimit())
dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
@@ -1740,40 +1767,28 @@
/*
* Free ring elements from starting at tx_cons until "done"
*
- * NB: the hardware will tell us about partial completion of multi-part
+ * NB:
+ * 1. The hardware will tell us about partial completion of multi-part
* buffers so make sure not to free skb to early.
+ * 2. This may run in parallel start_xmit because the it only
+ * looks at the tail of the queue of FIFO (tx_cons), not
+ * the head (tx_prod)
*/
static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
{
struct net_device *dev = sky2->netdev;
- struct pci_dev *pdev = sky2->hw->pdev;
unsigned idx;
- BUG_ON(done >= TX_RING_SIZE);
+ BUG_ON(done >= sky2->tx_ring_size);
for (idx = sky2->tx_cons; idx != done;
- idx = RING_NEXT(idx, TX_RING_SIZE)) {
- struct sky2_tx_le *le = sky2->tx_le + idx;
+ idx = RING_NEXT(idx, sky2->tx_ring_size)) {
struct tx_ring_info *re = sky2->tx_ring + idx;
+ struct sk_buff *skb = re->skb;
- switch(le->opcode & ~HW_OWNER) {
- case OP_LARGESEND:
- case OP_PACKET:
- pci_unmap_single(pdev,
- pci_unmap_addr(re, mapaddr),
- pci_unmap_len(re, maplen),
- PCI_DMA_TODEVICE);
- break;
- case OP_BUFFER:
- pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
- pci_unmap_len(re, maplen),
- PCI_DMA_TODEVICE);
- break;
- }
+ sky2_tx_unmap(sky2->hw->pdev, re);
- if (le->ctrl & EOP) {
- struct sk_buff *skb = re->skb;
-
+ if (skb) {
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
@@ -1781,14 +1796,9 @@
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
- if (skb_queue_len(&sky2->rx_recycle) < sky2->rx_pending
- && skb_recycle_check(skb, sky2->rx_data_size
- + sky2_rx_pad(sky2->hw)))
- __skb_queue_head(&sky2->rx_recycle, skb);
- else
- dev_kfree_skb_any(skb);
+ dev_kfree_skb_any(skb);
- sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
+ sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
}
}
@@ -1799,14 +1809,26 @@
netif_wake_queue(dev);
}
-/* Cleanup all untransmitted buffers, assume transmitter not running */
-static void sky2_tx_clean(struct net_device *dev)
+static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
{
- struct sky2_port *sky2 = netdev_priv(dev);
+ /* Disable Force Sync bit and Enable Alloc bit */
+ sky2_write8(hw, SK_REG(port, TXA_CTRL),
+ TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
- netif_tx_lock_bh(dev);
- sky2_tx_complete(sky2, sky2->tx_prod);
- netif_tx_unlock_bh(dev);
+ /* Stop Interval Timer and Limit Counter of Tx Arbiter */
+ sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
+ sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
+
+ /* Reset the PCI FIFO of the async Tx queue */
+ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
+ BMU_RST_SET | BMU_FIFO_RST);
+
+ /* Reset the Tx prefetch units */
+ sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
+ PREF_UNIT_RST_SET);
+
+ sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
+ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
}
/* Network shutdown */
@@ -1825,10 +1847,6 @@
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
- /* explicitly shut off tx incase we're restarting */
- sky2->restarting = 1;
- netif_tx_disable(dev);
-
/* Force flow control off */
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -1850,26 +1868,7 @@
&& port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
- /* Disable Force Sync bit and Enable Alloc bit */
- sky2_write8(hw, SK_REG(port, TXA_CTRL),
- TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-
- /* Stop Interval Timer and Limit Counter of Tx Arbiter */
- sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
- sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
-
- /* Reset the PCI FIFO of the async Tx queue */
- sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
- BMU_RST_SET | BMU_FIFO_RST);
-
- /* Reset the Tx prefetch units */
- sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
- PREF_UNIT_RST_SET);
-
- sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
-
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
/* Force any delayed status interrrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
@@ -1888,28 +1887,18 @@
synchronize_irq(hw->pdev->irq);
napi_synchronize(&hw->napi);
+ spin_lock_bh(&sky2->phy_lock);
sky2_phy_power_down(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
- /* turn off LED's */
- sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
+ sky2_tx_reset(hw, port);
- sky2_tx_clean(dev);
+ /* Free any pending frames stuck in HW queue */
+ sky2_tx_complete(sky2, sky2->tx_prod);
+
sky2_rx_clean(sky2);
- pci_free_consistent(hw->pdev, RX_LE_BYTES,
- sky2->rx_le, sky2->rx_le_map);
- kfree(sky2->rx_ring);
-
- pci_free_consistent(hw->pdev,
- TX_RING_SIZE * sizeof(struct sky2_tx_le),
- sky2->tx_le, sky2->tx_le_map);
- kfree(sky2->tx_ring);
-
- sky2->tx_le = NULL;
- sky2->rx_le = NULL;
-
- sky2->rx_ring = NULL;
- sky2->tx_ring = NULL;
+ sky2_free_buffers(sky2);
return 0;
}
@@ -2083,7 +2072,7 @@
printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
sky2->netdev->name, istatus, phystat);
- if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) {
+ if (istatus & PHY_M_IS_AN_COMPL) {
if (sky2_autoneg_done(sky2, phystat) == 0)
sky2_link_up(sky2);
goto out;
@@ -2370,11 +2359,8 @@
{
struct sky2_port *sky2 = netdev_priv(dev);
- if (likely(netif_running(dev) && !sky2->restarting)) {
- netif_tx_lock(dev);
+ if (netif_running(dev))
sky2_tx_complete(sky2, last);
- netif_tx_unlock(dev);
- }
}
static inline void sky2_skb_rx(const struct sky2_port *sky2,
@@ -2452,7 +2438,7 @@
/* This chip reports checksum status differently */
if (hw->flags & SKY2_HW_NEW_LE) {
- if (sky2->rx_csum &&
+ if ((sky2->flags & SKY2_FLAG_RX_CHECKSUM) &&
(le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
(le->css & CSS_TCPUDPCSOK))
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -2479,7 +2465,7 @@
/* fall through */
#endif
case OP_RXCHKS:
- if (!sky2->rx_csum)
+ if (!(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
break;
/* If this happens then driver assuming wrong format */
@@ -2504,7 +2490,8 @@
printk(KERN_NOTICE PFX "%s: hardware receive "
"checksum problem (status = %#x)\n",
dev->name, status);
- sky2->rx_csum = 0;
+ sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
+
sky2_write32(sky2->hw,
Q_ADDR(rxqaddr[port], Q_CSR),
BMU_DIS_RX_CHKSUM);
@@ -2513,7 +2500,6 @@
case OP_TXINDEXLE:
/* TX index reports status for both ports */
- BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
sky2_tx_done(hw->dev[0], status & 0xfff);
if (hw->dev[1])
sky2_tx_done(hw->dev[1],
@@ -2657,19 +2643,15 @@
}
/* This should never happen it is a bug. */
-static void sky2_le_error(struct sky2_hw *hw, unsigned port,
- u16 q, unsigned ring_size)
+static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
{
struct net_device *dev = hw->dev[port];
- struct sky2_port *sky2 = netdev_priv(dev);
- unsigned idx;
- const u64 *le = (q == Q_R1 || q == Q_R2)
- ? (u64 *) sky2->rx_le : (u64 *) sky2->tx_le;
+ u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
- idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
- printk(KERN_ERR PFX "%s: descriptor error q=%#x get=%u [%llx] put=%u\n",
- dev->name, (unsigned) q, idx, (unsigned long long) le[idx],
- (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
+ dev_err(&hw->pdev->dev, PFX
+ "%s: descriptor error q=%#x get=%u put=%u\n",
+ dev->name, (unsigned) q, (unsigned) idx,
+ (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
}
@@ -2755,16 +2737,16 @@
sky2_mac_intr(hw, 1);
if (status & Y2_IS_CHK_RX1)
- sky2_le_error(hw, 0, Q_R1, RX_LE_SIZE);
+ sky2_le_error(hw, 0, Q_R1);
if (status & Y2_IS_CHK_RX2)
- sky2_le_error(hw, 1, Q_R2, RX_LE_SIZE);
+ sky2_le_error(hw, 1, Q_R2);
if (status & Y2_IS_CHK_TXA1)
- sky2_le_error(hw, 0, Q_XA1, TX_RING_SIZE);
+ sky2_le_error(hw, 0, Q_XA1);
if (status & Y2_IS_CHK_TXA2)
- sky2_le_error(hw, 1, Q_XA2, TX_RING_SIZE);
+ sky2_le_error(hw, 1, Q_XA2);
}
static int sky2_poll(struct napi_struct *napi, int work_limit)
@@ -3009,8 +2991,6 @@
sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
- sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
-
/* Turn off descriptor polling */
sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
@@ -3078,18 +3058,46 @@
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
}
+/* Take device down (offline).
+ * Equivalent to doing dev_stop() but this does not
+ * inform upper layers of the transistion.
+ */
+static void sky2_detach(struct net_device *dev)
+{
+ if (netif_running(dev)) {
+ netif_device_detach(dev); /* stop txq */
+ sky2_down(dev);
+ }
+}
+
+/* Bring device back after doing sky2_detach */
+static int sky2_reattach(struct net_device *dev)
+{
+ int err = 0;
+
+ if (netif_running(dev)) {
+ err = sky2_up(dev);
+ if (err) {
+ printk(KERN_INFO PFX "%s: could not restart %d\n",
+ dev->name, err);
+ dev_close(dev);
+ } else {
+ netif_device_attach(dev);
+ sky2_set_multicast(dev);
+ }
+ }
+
+ return err;
+}
+
static void sky2_restart(struct work_struct *work)
{
struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
- struct net_device *dev;
- int i, err;
+ int i;
rtnl_lock();
- for (i = 0; i < hw->ports; i++) {
- dev = hw->dev[i];
- if (netif_running(dev))
- sky2_down(dev);
- }
+ for (i = 0; i < hw->ports; i++)
+ sky2_detach(hw->dev[i]);
napi_disable(&hw->napi);
sky2_write32(hw, B0_IMSK, 0);
@@ -3097,17 +3105,8 @@
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
napi_enable(&hw->napi);
- for (i = 0; i < hw->ports; i++) {
- dev = hw->dev[i];
- if (netif_running(dev)) {
- err = sky2_up(dev);
- if (err) {
- printk(KERN_INFO PFX "%s: could not restart %d\n",
- dev->name, err);
- dev_close(dev);
- }
- }
- }
+ for (i = 0; i < hw->ports; i++)
+ sky2_reattach(hw->dev[i]);
rtnl_unlock();
}
@@ -3186,7 +3185,8 @@
}
ecmd->advertising = sky2->advertising;
- ecmd->autoneg = sky2->autoneg;
+ ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
+ ? AUTONEG_ENABLE : AUTONEG_DISABLE;
ecmd->duplex = sky2->duplex;
return 0;
}
@@ -3198,6 +3198,7 @@
u32 supported = sky2_supported_modes(hw);
if (ecmd->autoneg == AUTONEG_ENABLE) {
+ sky2->flags |= SKY2_FLAG_AUTO_SPEED;
ecmd->advertising = supported;
sky2->duplex = -1;
sky2->speed = -1;
@@ -3239,9 +3240,9 @@
sky2->speed = ecmd->speed;
sky2->duplex = ecmd->duplex;
+ sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
}
- sky2->autoneg = ecmd->autoneg;
sky2->advertising = ecmd->advertising;
if (netif_running(dev)) {
@@ -3311,14 +3312,17 @@
{
struct sky2_port *sky2 = netdev_priv(dev);
- return sky2->rx_csum;
+ return !!(sky2->flags & SKY2_FLAG_RX_CHECKSUM);
}
static int sky2_set_rx_csum(struct net_device *dev, u32 data)
{
struct sky2_port *sky2 = netdev_priv(dev);
- sky2->rx_csum = data;
+ if (data)
+ sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
+ else
+ sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM;
sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
@@ -3336,7 +3340,7 @@
{
struct sky2_port *sky2 = netdev_priv(dev);
- if (!netif_running(dev) || sky2->autoneg != AUTONEG_ENABLE)
+ if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
return -EINVAL;
sky2_phy_reinit(sky2);
@@ -3576,7 +3580,8 @@
ecmd->tx_pause = ecmd->rx_pause = 1;
}
- ecmd->autoneg = sky2->autoneg;
+ ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
+ ? AUTONEG_ENABLE : AUTONEG_DISABLE;
}
static int sky2_set_pauseparam(struct net_device *dev,
@@ -3584,7 +3589,11 @@
{
struct sky2_port *sky2 = netdev_priv(dev);
- sky2->autoneg = ecmd->autoneg;
+ if (ecmd->autoneg == AUTONEG_ENABLE)
+ sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
+ else
+ sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
+
sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
if (netif_running(dev))
@@ -3640,7 +3649,7 @@
ecmd->rx_coalesce_usecs_irq > tmax)
return -EINVAL;
- if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
+ if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
return -EINVAL;
if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
return -EINVAL;
@@ -3684,7 +3693,7 @@
ering->rx_max_pending = RX_MAX_PENDING;
ering->rx_mini_max_pending = 0;
ering->rx_jumbo_max_pending = 0;
- ering->tx_max_pending = TX_RING_SIZE - 1;
+ ering->tx_max_pending = TX_MAX_PENDING;
ering->rx_pending = sky2->rx_pending;
ering->rx_mini_pending = 0;
@@ -3696,27 +3705,20 @@
struct ethtool_ringparam *ering)
{
struct sky2_port *sky2 = netdev_priv(dev);
- int err = 0;
if (ering->rx_pending > RX_MAX_PENDING ||
ering->rx_pending < 8 ||
- ering->tx_pending < MAX_SKB_TX_LE ||
- ering->tx_pending > TX_RING_SIZE - 1)
+ ering->tx_pending < TX_MIN_PENDING ||
+ ering->tx_pending > TX_MAX_PENDING)
return -EINVAL;
- if (netif_running(dev))
- sky2_down(dev);
+ sky2_detach(dev);
sky2->rx_pending = ering->rx_pending;
sky2->tx_pending = ering->tx_pending;
+ sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
- if (netif_running(dev)) {
- err = sky2_up(dev);
- if (err)
- dev_close(dev);
- }
-
- return err;
+ return sky2_reattach(dev);
}
static int sky2_get_regs_len(struct net_device *dev)
@@ -4084,8 +4086,8 @@
/* Dump contents of tx ring */
sop = 1;
- for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE;
- idx = RING_NEXT(idx, TX_RING_SIZE)) {
+ for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
+ idx = RING_NEXT(idx, sky2->tx_ring_size)) {
const struct sky2_tx_le *le = sky2->tx_le + idx;
u32 a = le32_to_cpu(le->addr);
@@ -4128,7 +4130,7 @@
seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
- last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
+ sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
sky2_read32(hw, B0_Y2_SP_LISR);
@@ -4282,19 +4284,22 @@
sky2->msg_enable = netif_msg_init(debug, default_msg);
/* Auto speed and flow control */
- sky2->autoneg = AUTONEG_ENABLE;
+ sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
+ if (hw->chip_id != CHIP_ID_YUKON_XL)
+ sky2->flags |= SKY2_FLAG_RX_CHECKSUM;
+
sky2->flow_mode = FC_BOTH;
sky2->duplex = -1;
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
- sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
sky2->wol = wol;
spin_lock_init(&sky2->phy_lock);
+
sky2->tx_pending = TX_DEF_PENDING;
+ sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
sky2->rx_pending = RX_DEF_PENDING;
- sky2->restarting = 0;
hw->dev[port] = dev;
@@ -4602,7 +4607,6 @@
sky2_power_aux(hw);
- sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_read8(hw, B0_CTST);
@@ -4634,13 +4638,12 @@
del_timer_sync(&hw->watchdog_timer);
cancel_work_sync(&hw->restart_work);
+ rtnl_lock();
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct sky2_port *sky2 = netdev_priv(dev);
- netif_device_detach(dev);
- if (netif_running(dev))
- sky2_down(dev);
+ sky2_detach(dev);
if (sky2->wol)
sky2_wol_init(sky2);
@@ -4651,6 +4654,7 @@
sky2_write32(hw, B0_IMSK, 0);
napi_disable(&hw->napi);
sky2_power_aux(hw);
+ rtnl_unlock();
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
@@ -4687,25 +4691,18 @@
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
napi_enable(&hw->napi);
+ rtnl_lock();
for (i = 0; i < hw->ports; i++) {
- struct net_device *dev = hw->dev[i];
-
- netif_device_attach(dev);
- if (netif_running(dev)) {
- err = sky2_up(dev);
- if (err) {
- printk(KERN_ERR PFX "%s: could not up: %d\n",
- dev->name, err);
- rtnl_lock();
- dev_close(dev);
- rtnl_unlock();
- goto out;
- }
- }
+ err = sky2_reattach(hw->dev[i]);
+ if (err)
+ goto out;
}
+ rtnl_unlock();
return 0;
out:
+ rtnl_unlock();
+
dev_err(&pdev->dev, "resume failed (%d)\n", err);
pci_disable_device(pdev);
return err;
@@ -4720,6 +4717,7 @@
if (!hw)
return;
+ rtnl_lock();
del_timer_sync(&hw->watchdog_timer);
for (i = 0; i < hw->ports; i++) {
@@ -4734,6 +4732,7 @@
if (wol)
sky2_power_aux(hw);
+ rtnl_unlock();
pci_enable_wake(pdev, PCI_D3hot, wol);
pci_enable_wake(pdev, PCI_D3cold, wol);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 4486b06..e0f23a1 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -155,7 +155,7 @@
enum csr_regs {
B0_RAP = 0x0000,
B0_CTST = 0x0004,
- B0_Y2LED = 0x0005,
+
B0_POWER_CTRL = 0x0007,
B0_ISRC = 0x0008,
B0_IMSK = 0x000c,
@@ -260,7 +260,7 @@
Y2_CFG_AER = 0x1d00, /* PCI Advanced Error Report region */
};
-/* B0_CTST 16 bit Control/Status register */
+/* B0_CTST 24 bit Control/Status register */
enum {
Y2_VMAIN_AVAIL = 1<<17,/* VMAIN available (YUKON-2 only) */
Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */
@@ -283,13 +283,6 @@
CS_RST_SET = 1, /* Set Software reset */
};
-/* B0_LED 8 Bit LED register */
-enum {
-/* Bit 7.. 2: reserved */
- LED_STAT_ON = 1<<1, /* Status LED on */
- LED_STAT_OFF = 1, /* Status LED off */
-};
-
/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
enum {
PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */
@@ -1583,7 +1576,6 @@
};
#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
-#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS)
/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
enum {
@@ -1985,6 +1977,9 @@
struct tx_ring_info {
struct sk_buff *skb;
+ unsigned long flags;
+#define TX_MAP_SINGLE 0x0001
+#define TX_MAP_PAGE 000002
DECLARE_PCI_UNMAP_ADDR(mapaddr);
DECLARE_PCI_UNMAP_LEN(maplen);
};
@@ -2012,12 +2007,14 @@
struct tx_ring_info *tx_ring;
struct sky2_tx_le *tx_le;
+ u16 tx_ring_size;
u16 tx_cons; /* next le to check */
u16 tx_prod; /* next le to use */
u16 tx_next; /* debug only */
u16 tx_pending;
u16 tx_last_mss;
+ u32 tx_last_upper;
u32 tx_tcpsum;
struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp;
@@ -2028,7 +2025,6 @@
u16 rx_pending;
u16 rx_data_size;
u16 rx_nfrags;
- struct sk_buff_head rx_recycle;
#ifdef SKY2_VLAN_TAG_USED
u16 rx_tag;
@@ -2042,16 +2038,18 @@
u8 fifo_lev;
} check;
-
dma_addr_t rx_le_map;
dma_addr_t tx_le_map;
+
u16 advertising; /* ADVERTISED_ bits */
- u16 speed; /* SPEED_1000, SPEED_100, ... */
- u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */
- u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
- u8 rx_csum;
- u8 wol;
- u8 restarting;
+ u16 speed; /* SPEED_1000, SPEED_100, ... */
+ u8 wol; /* WAKE_ bits */
+ u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
+ u16 flags;
+#define SKY2_FLAG_RX_CHECKSUM 0x0001
+#define SKY2_FLAG_AUTO_SPEED 0x0002
+#define SKY2_FLAG_AUTO_PAUSE 0x0004
+
enum flow_control flow_mode;
enum flow_control flow_status;
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 5c61d5f..26f6ee9 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -474,7 +474,7 @@
/* Encapsulate an IP datagram and kick it into a TTY queue. */
-static int
+static netdev_tx_t
sl_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct slip *sl = netdev_priv(dev);
@@ -484,12 +484,12 @@
spin_unlock(&sl->lock);
printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (sl->tty == NULL) {
spin_unlock(&sl->lock);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
sl_lock(sl);
@@ -498,7 +498,7 @@
spin_unlock(&sl->lock);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index bc4976a..2a6b6de 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -553,7 +553,7 @@
dev->stats.tx_dropped++;
spin_unlock_irqrestore(&lp->lock, flags);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
#ifdef SMC_USE_DMA
@@ -566,7 +566,7 @@
lp->pending_tx_skb = skb;
netif_stop_queue(dev);
spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
} else {
DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name);
lp->txdma_active = 1;
@@ -577,7 +577,7 @@
smc911x_hardware_send_pkt(dev);
spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 8140f7c..05adb6a 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -236,7 +236,6 @@
* Use a DMA for RX and TX packets.
*/
#include <linux/dma-mapping.h>
-#include <mach/dma.h>
static dma_addr_t rx_dmabuf, tx_dmabuf;
static int rx_dmalen, tx_dmalen;
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index e02471b..934a120 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -299,7 +299,8 @@
. to store the packet, I call this routine, which either sends it
. now, or generates an interrupt when the card is ready for the
. packet */
-static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device *dev );
+static netdev_tx_t smc_wait_to_send_packet( struct sk_buff * skb,
+ struct net_device *dev );
/* this does a soft reset on the device */
static void smc_reset( int ioaddr );
@@ -487,7 +488,8 @@
. o (NO): Enable interrupts and let the interrupt handler deal with it.
. o (YES):Send it now.
*/
-static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * dev )
+static netdev_tx_t smc_wait_to_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct smc_local *lp = netdev_priv(dev);
unsigned int ioaddr = dev->base_addr;
@@ -512,7 +514,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN)) {
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
length = ETH_ZLEN;
}
@@ -534,7 +536,7 @@
lp->saved_skb = NULL;
/* this IS an error, but, i don't want the skb saved */
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
/* either way, a packet is waiting now */
lp->packets_waiting++;
@@ -571,12 +573,12 @@
SMC_ENABLE_INT( IM_ALLOC_INT );
PRINTK2((CARDNAME": memory allocation deferred. \n"));
/* it's deferred, but I'll handle it later */
- return 0;
+ return NETDEV_TX_OK;
}
/* or YES! I can send the packet now.. */
smc_hardware_send_packet(dev);
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 1c70e99..61be6d7 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -196,21 +196,23 @@
/* this enables an interrupt in the interrupt mask register */
#define SMC_ENABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_enable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_enable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask |= (x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \
} while (0)
/* this disables an interrupt from the interrupt mask register */
#define SMC_DISABLE_INT(lp, x) do { \
unsigned char mask; \
- spin_lock_irq(&lp->lock); \
+ unsigned long smc_disable_flags; \
+ spin_lock_irqsave(&lp->lock, smc_disable_flags); \
mask = SMC_GET_INT_MASK(lp); \
mask &= ~(x); \
SMC_SET_INT_MASK(lp, mask); \
- spin_unlock_irq(&lp->lock); \
+ spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \
} while (0)
/*
@@ -520,21 +522,21 @@
* any other concurrent access and C would always interrupt B. But life
* isn't that easy in a SMP world...
*/
-#define smc_special_trylock(lock) \
+#define smc_special_trylock(lock, flags) \
({ \
int __ret; \
- local_irq_disable(); \
+ local_irq_save(flags); \
__ret = spin_trylock(lock); \
if (!__ret) \
- local_irq_enable(); \
+ local_irq_restore(flags); \
__ret; \
})
-#define smc_special_lock(lock) spin_lock_irq(lock)
-#define smc_special_unlock(lock) spin_unlock_irq(lock)
+#define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags)
+#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags)
#else
-#define smc_special_trylock(lock) (1)
-#define smc_special_lock(lock) do { } while (0)
-#define smc_special_unlock(lock) do { } while (0)
+#define smc_special_trylock(lock, flags) (1)
+#define smc_special_lock(lock, flags) do { } while (0)
+#define smc_special_unlock(lock, flags) do { } while (0)
#endif
/*
@@ -548,10 +550,11 @@
struct sk_buff *skb;
unsigned int packet_no, len;
unsigned char *buf;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
- if (!smc_special_trylock(&lp->lock)) {
+ if (!smc_special_trylock(&lp->lock, flags)) {
netif_stop_queue(dev);
tasklet_schedule(&lp->tx_task);
return;
@@ -559,7 +562,7 @@
skb = lp->pending_tx_skb;
if (unlikely(!skb)) {
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
return;
}
lp->pending_tx_skb = NULL;
@@ -569,7 +572,7 @@
printk("%s: Memory allocation failed.\n", dev->name);
dev->stats.tx_errors++;
dev->stats.tx_fifo_errors++;
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
goto done;
}
@@ -608,7 +611,7 @@
/* queue the packet for TX */
SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
dev->trans_start = jiffies;
dev->stats.tx_packets++;
@@ -633,6 +636,7 @@
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
unsigned int numPages, poll_count, status;
+ unsigned long flags;
DBG(3, "%s: %s\n", dev->name, __func__);
@@ -655,10 +659,10 @@
dev->stats.tx_errors++;
dev->stats.tx_dropped++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
- smc_special_lock(&lp->lock);
+ smc_special_lock(&lp->lock, flags);
/* now, try to allocate the memory */
SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
@@ -676,7 +680,7 @@
}
} while (--poll_count);
- smc_special_unlock(&lp->lock);
+ smc_special_unlock(&lp->lock, flags);
lp->pending_tx_skb = skb;
if (!poll_count) {
@@ -692,7 +696,7 @@
smc_hardware_send_pkt((unsigned long)dev);
}
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 94b6d26..ccdd196 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -50,6 +50,7 @@
#include <linux/swab.h>
#include <linux/phy.h>
#include <linux/smsc911x.h>
+#include <linux/device.h>
#include "smsc911x.h"
#define SMSC_CHIPNAME "smsc911x"
@@ -1046,7 +1047,6 @@
/* Update counters */
dev->stats.rx_packets++;
dev->stats.rx_bytes += (pktlength - 4);
- dev->last_rx = jiffies;
}
/* Return total received packets */
@@ -2114,10 +2114,12 @@
/* This implementation assumes the devices remains powered on its VDDVARIO
* pins during suspend. */
-static int smsc911x_suspend(struct platform_device *pdev, pm_message_t state)
+/* TODO: implement freeze/thaw callbacks for hibernation.*/
+
+static int smsc911x_suspend(struct device *dev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct smsc911x_data *pdata = netdev_priv(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct smsc911x_data *pdata = netdev_priv(ndev);
/* enable wake on LAN, energy detection and the external PME
* signal. */
@@ -2128,10 +2130,10 @@
return 0;
}
-static int smsc911x_resume(struct platform_device *pdev)
+static int smsc911x_resume(struct device *dev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct smsc911x_data *pdata = netdev_priv(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct smsc911x_data *pdata = netdev_priv(ndev);
unsigned int to = 100;
/* Note 3.11 from the datasheet:
@@ -2149,19 +2151,25 @@
return (to == 0) ? -EIO : 0;
}
+static struct dev_pm_ops smsc911x_pm_ops = {
+ .suspend = smsc911x_suspend,
+ .resume = smsc911x_resume,
+};
+
+#define SMSC911X_PM_OPS (&smsc911x_pm_ops)
+
#else
-#define smsc911x_suspend NULL
-#define smsc911x_resume NULL
+#define SMSC911X_PM_OPS NULL
#endif
static struct platform_driver smsc911x_driver = {
.probe = smsc911x_drv_probe,
.remove = __devexit_p(smsc911x_drv_remove),
.driver = {
- .name = SMSC_CHIPNAME,
+ .name = SMSC_CHIPNAME,
+ .owner = THIS_MODULE,
+ .pm = SMSC911X_PM_OPS,
},
- .suspend = smsc911x_suspend,
- .resume = smsc911x_resume,
};
/* Entry point for loading the module */
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 60abdb1..b4909a2 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -817,7 +817,6 @@
skb->protocol = eth_type_trans(skb, dev);
netif_receive_skb(skb);
- dev->last_rx = jiffies;
}
static int smsc9420_alloc_rx_buffer(struct smsc9420_pdata *pd, int index)
@@ -968,7 +967,8 @@
}
}
-static int smsc9420_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t smsc9420_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct smsc9420_pdata *pd = netdev_priv(dev);
dma_addr_t mapping;
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index 753a1fb..9599ce7 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -211,7 +211,7 @@
length = skb->len;
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
@@ -265,7 +265,7 @@
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 669253c..a36e2b5 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -595,7 +595,7 @@
static void check_duplex(struct net_device *dev);
static void tx_timeout(struct net_device *dev);
static void init_ring(struct net_device *dev);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
static int __netdev_rx(struct net_device *dev, int *quota);
@@ -1223,7 +1223,7 @@
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
unsigned int entry;
@@ -1311,7 +1311,7 @@
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index 7bb2742..2f1eaaf 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -1015,7 +1015,7 @@
if(skb->len > XMIT_BUFF_SIZE)
{
printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev->name,XMIT_BUFF_SIZE,skb->len);
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue(dev);
@@ -1110,7 +1110,7 @@
dev_kfree_skb(skb);
#endif
}
- return 0;
+ return NETDEV_TX_OK;
}
/*******************************************
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index 534dfe3..0ca4241 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -562,7 +562,7 @@
netif_start_queue(dev);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
@@ -648,7 +648,7 @@
local_irq_restore(flags);
- return 0;
+ return NETDEV_TX_OK;
}
/* The LANCE interrupt handler. */
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 5017d7f..536cf7e 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -984,7 +984,7 @@
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static struct net_device_stats *bigmac_get_stats(struct net_device *dev)
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index d1521c3..e13685a 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -415,7 +415,7 @@
static void netdev_timer(unsigned long data);
static void tx_timeout(struct net_device *dev);
static void init_ring(struct net_device *dev);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static int reset_tx (struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void rx_poll(unsigned long data);
@@ -1053,7 +1053,7 @@
return;
}
-static int
+static netdev_tx_t
start_tx (struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
@@ -1091,7 +1091,7 @@
"%s: Transmit frame #%d queued in slot %d.\n",
dev->name, np->cur_tx, entry);
}
- return 0;
+ return NETDEV_TX_OK;
}
/* Reset hardware tx and free all of tx buffers */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index d2dfe0a..305ec3d 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1015,7 +1015,8 @@
return 0;
}
-static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t gem_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct gem *gp = netdev_priv(dev);
int entry;
@@ -2851,9 +2852,7 @@
break;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- rc = -EPERM;
- else if (!gp->running)
+ if (!gp->running)
rc = -EAGAIN;
else {
__phy_write(gp, data->phy_id & 0x1f, data->reg_num & 0x1f,
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 4ef72919..37d721b 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2252,7 +2252,8 @@
netif_wake_queue(dev);
}
-static int happy_meal_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t happy_meal_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct happy_meal *hp = netdev_priv(dev);
int entry;
@@ -2338,7 +2339,7 @@
dev->trans_start = jiffies;
tx_add_log(hp, TXLOG_ACTION_TXMIT, 0);
- return 0;
+ return NETDEV_TX_OK;
}
static struct net_device_stats *happy_meal_get_stats(struct net_device *dev)
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index afc7b35..9d6fd47 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1163,7 +1163,7 @@
dev->trans_start = jiffies;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* taken from the depca driver */
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index c6ec61e..dcefb60 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -621,7 +621,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void qe_set_multicast(struct net_device *dev)
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d737f6b..d1298e5 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -23,9 +23,9 @@
*/
#ifdef TC35815_NAPI
-#define DRV_VERSION "1.37-NAPI"
+#define DRV_VERSION "1.38-NAPI"
#else
-#define DRV_VERSION "1.37"
+#define DRV_VERSION "1.38"
#endif
static const char *version = "tc35815.c:v" DRV_VERSION "\n";
#define MODNAME "tc35815"
@@ -341,8 +341,9 @@
Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \
Tx_En) /* maybe 0x7b01 */
#endif
+/* Do not use Rx_StripCRC -- it causes trouble on BLEx/FDAEx condition */
#define RX_CTL_CMD (Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \
- | Rx_EnCRCErr | Rx_EnAlign | Rx_StripCRC | Rx_RxEn) /* maybe 0x6f11 */
+ | Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */
#define INT_EN_CMD (Int_NRAbtEn | \
Int_DmParErrEn | Int_DParDEn | Int_DParErrEn | \
Int_SSysErrEn | Int_RMasAbtEn | Int_RTargAbtEn | \
@@ -593,9 +594,10 @@
struct net_device *dev = bus->priv;
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
- unsigned long timeout = jiffies + 10;
+ unsigned long timeout = jiffies + HZ;
tc_writel(MD_CA_Busy | (mii_id << 5) | (regnum & 0x1f), &tr->MD_CA);
+ udelay(12); /* it takes 32 x 400ns at least */
while (tc_readl(&tr->MD_CA) & MD_CA_Busy) {
if (time_after(jiffies, timeout))
return -EIO;
@@ -609,11 +611,12 @@
struct net_device *dev = bus->priv;
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
- unsigned long timeout = jiffies + 10;
+ unsigned long timeout = jiffies + HZ;
tc_writel(val, &tr->MD_Data);
tc_writel(MD_CA_Busy | MD_CA_Wr | (mii_id << 5) | (regnum & 0x1f),
&tr->MD_CA);
+ udelay(12); /* it takes 32 x 400ns at least */
while (tc_readl(&tr->MD_CA) & MD_CA_Busy) {
if (time_after(jiffies, timeout))
return -EIO;
@@ -1509,7 +1512,7 @@
*/
spin_unlock_irqrestore(&lp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
#define FATAL_ERROR_INT \
@@ -1540,8 +1543,6 @@
#endif
{
struct tc35815_local *lp = netdev_priv(dev);
- struct tc35815_regs __iomem *tr =
- (struct tc35815_regs __iomem *)dev->base_addr;
int ret = -1;
/* Fatal errors... */
@@ -1551,27 +1552,26 @@
}
/* recoverable errors */
if (status & Int_IntFDAEx) {
- /* disable FDAEx int. (until we make rooms...) */
- tc_writel(tc_readl(&tr->Int_En) & ~Int_FDAExEn, &tr->Int_En);
- printk(KERN_WARNING
- "%s: Free Descriptor Area Exhausted (%#x).\n",
- dev->name, status);
+ if (netif_msg_rx_err(lp))
+ dev_warn(&dev->dev,
+ "Free Descriptor Area Exhausted (%#x).\n",
+ status);
dev->stats.rx_dropped++;
ret = 0;
}
if (status & Int_IntBLEx) {
- /* disable BLEx int. (until we make rooms...) */
- tc_writel(tc_readl(&tr->Int_En) & ~Int_BLExEn, &tr->Int_En);
- printk(KERN_WARNING
- "%s: Buffer List Exhausted (%#x).\n",
- dev->name, status);
+ if (netif_msg_rx_err(lp))
+ dev_warn(&dev->dev,
+ "Buffer List Exhausted (%#x).\n",
+ status);
dev->stats.rx_dropped++;
ret = 0;
}
if (status & Int_IntExBD) {
- printk(KERN_WARNING
- "%s: Excessive Buffer Descriptiors (%#x).\n",
- dev->name, status);
+ if (netif_msg_rx_err(lp))
+ dev_warn(&dev->dev,
+ "Excessive Buffer Descriptiors (%#x).\n",
+ status);
dev->stats.rx_length_errors++;
ret = 0;
}
@@ -1630,8 +1630,12 @@
spin_lock(&lp->lock);
status = tc_readl(&tr->Int_Src);
- tc_writel(status, &tr->Int_Src); /* write to clear */
+ /* BLEx, FDAEx will be cleared later */
+ tc_writel(status & ~(Int_BLEx | Int_FDAEx),
+ &tr->Int_Src); /* write to clear */
handled = tc35815_do_interrupt(dev, status);
+ if (status & (Int_BLEx | Int_FDAEx))
+ tc_writel(status & (Int_BLEx | Int_FDAEx), &tr->Int_Src);
(void)tc_readl(&tr->Int_Src); /* flush */
spin_unlock(&lp->lock);
return IRQ_RETVAL(handled >= 0);
@@ -1659,8 +1663,6 @@
struct tc35815_local *lp = netdev_priv(dev);
unsigned int fdctl;
int i;
- int buf_free_count = 0;
- int fd_free_count = 0;
#ifdef TC35815_NAPI
int received = 0;
#endif
@@ -1769,8 +1771,9 @@
dev->stats.rx_bytes += pkt_len;
} else {
dev->stats.rx_errors++;
- printk(KERN_DEBUG "%s: Rx error (status %x)\n",
- dev->name, status & Rx_Stat_Mask);
+ if (netif_msg_rx_err(lp))
+ dev_info(&dev->dev, "Rx error (status %x)\n",
+ status & Rx_Stat_Mask);
/* WORKAROUND: LongErr and CRCErr means Overflow. */
if ((status & Rx_LongErr) && (status & Rx_CRCErr)) {
status &= ~(Rx_LongErr|Rx_CRCErr);
@@ -1848,7 +1851,6 @@
#else
lp->fbl_count++;
#endif
- buf_free_count++;
}
}
@@ -1870,7 +1872,6 @@
#endif
lp->rfd_cur->fd.FDCtl = cpu_to_le32(FD_CownsFD);
lp->rfd_cur++;
- fd_free_count++;
}
if (lp->rfd_cur > lp->rfd_limit)
lp->rfd_cur = lp->rfd_base;
@@ -1881,17 +1882,6 @@
#endif
}
- /* re-enable BL/FDA Exhaust interrupts. */
- if (fd_free_count) {
- struct tc35815_regs __iomem *tr =
- (struct tc35815_regs __iomem *)dev->base_addr;
- u32 en, en_old = tc_readl(&tr->Int_En);
- en = en_old | Int_FDAExEn;
- if (buf_free_count)
- en |= Int_BLExEn;
- if (en != en_old)
- tc_writel(en, &tr->Int_En);
- }
#ifdef TC35815_NAPI
return received;
#endif
@@ -1910,9 +1900,14 @@
spin_lock(&lp->lock);
status = tc_readl(&tr->Int_Src);
do {
- tc_writel(status, &tr->Int_Src); /* write to clear */
+ /* BLEx, FDAEx will be cleared later */
+ tc_writel(status & ~(Int_BLEx | Int_FDAEx),
+ &tr->Int_Src); /* write to clear */
handled = tc35815_do_interrupt(dev, status, budget - received);
+ if (status & (Int_BLEx | Int_FDAEx))
+ tc_writel(status & (Int_BLEx | Int_FDAEx),
+ &tr->Int_Src);
if (handled >= 0) {
received += handled;
if (received >= budget)
@@ -2144,7 +2139,7 @@
(struct tc35815_regs __iomem *)dev->base_addr;
if (netif_running(dev))
/* Update the statistics from the device registers. */
- dev->stats.rx_missed_errors = tc_readl(&tr->Miss_Cnt);
+ dev->stats.rx_missed_errors += tc_readl(&tr->Miss_Cnt);
return &dev->stats;
}
@@ -2399,8 +2394,6 @@
tc_writel(DMA_BURST_SIZE, &tr->DMA_Ctl);
#ifdef TC35815_USE_PACKEDBUFFER
tc_writel(RxFrag_EnPack | ETH_ZLEN, &tr->RxFragSize); /* Packing */
-#else
- tc_writel(ETH_ZLEN, &tr->RxFragSize);
#endif
tc_writel(0, &tr->TxPollCtr); /* Batch mode */
tc_writel(TX_THRESHOLD, &tr->TxThrsh);
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 3c2679c..ec9dfb2 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1622,7 +1622,8 @@
* the driver. Note: the driver must NOT put the skb in its DMA ring.
* o NETDEV_TX_LOCKED Locking failed, please retry quickly.
*/
-static int bdx_tx_transmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t bdx_tx_transmit(struct sk_buff *skb,
+ struct net_device *ndev)
{
struct bdx_priv *priv = netdev_priv(ndev);
struct txd_fifo *f = &priv->txd_fifo0;
@@ -2427,7 +2428,7 @@
*/
static void bdx_ethtool_ops(struct net_device *netdev)
{
- static struct ethtool_ops bdx_ethtool_ops = {
+ static const struct ethtool_ops bdx_ethtool_ops = {
.get_settings = bdx_get_settings,
.get_drvinfo = bdx_get_drvinfo,
.get_link = ethtool_op_get_link,
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 46a3f86..f09bc5d 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.99"
-#define DRV_MODULE_RELDATE "April 20, 2009"
+#define DRV_MODULE_VERSION "3.102"
+#define DRV_MODULE_RELDATE "September 1, 2009"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -92,7 +92,7 @@
/* hardware minimum and maximum for a single frame's data payload */
#define TG3_MIN_MTU 60
#define TG3_MAX_MTU(tp) \
- ((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) ? 9000 : 1500)
+ ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) ? 9000 : 1500)
/* These numbers seem to be hard coded in the NIC firmware somehow.
* You can't change the ring sizes, but you can change where you place
@@ -102,6 +102,7 @@
#define TG3_DEF_RX_RING_PENDING 200
#define TG3_RX_JUMBO_RING_SIZE 256
#define TG3_DEF_RX_JUMBO_RING_PENDING 100
+#define TG3_RSS_INDIR_TBL_SIZE 128
/* Do not place this n-ring entries value into the tp struct itself,
* we really want to expose these constants to GCC so that modulo et
@@ -110,26 +111,34 @@
* replace things like '% foo' with '& (foo - 1)'.
*/
#define TG3_RX_RCB_RING_SIZE(tp) \
- ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 512 : 1024)
+ (((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) && \
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) ? 1024 : 512)
#define TG3_TX_RING_SIZE 512
#define TG3_DEF_TX_RING_PENDING (TG3_TX_RING_SIZE - 1)
#define TG3_RX_RING_BYTES (sizeof(struct tg3_rx_buffer_desc) * \
TG3_RX_RING_SIZE)
-#define TG3_RX_JUMBO_RING_BYTES (sizeof(struct tg3_rx_buffer_desc) * \
- TG3_RX_JUMBO_RING_SIZE)
+#define TG3_RX_JUMBO_RING_BYTES (sizeof(struct tg3_ext_rx_buffer_desc) * \
+ TG3_RX_JUMBO_RING_SIZE)
#define TG3_RX_RCB_RING_BYTES(tp) (sizeof(struct tg3_rx_buffer_desc) * \
- TG3_RX_RCB_RING_SIZE(tp))
+ TG3_RX_RCB_RING_SIZE(tp))
#define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \
TG3_TX_RING_SIZE)
#define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1))
-#define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64)
-#define RX_JUMBO_PKT_BUF_SZ (9046 + tp->rx_offset + 64)
+#define TG3_DMA_BYTE_ENAB 64
+
+#define TG3_RX_STD_DMA_SZ 1536
+#define TG3_RX_JMB_DMA_SZ 9046
+
+#define TG3_RX_DMA_TO_MAP_SZ(x) ((x) + TG3_DMA_BYTE_ENAB)
+
+#define TG3_RX_STD_MAP_SZ TG3_RX_DMA_TO_MAP_SZ(TG3_RX_STD_DMA_SZ)
+#define TG3_RX_JMB_MAP_SZ TG3_RX_DMA_TO_MAP_SZ(TG3_RX_JMB_DMA_SZ)
/* minimum number of free TX descriptors required to wake up TX process */
-#define TG3_TX_WAKEUP_THRESH(tp) ((tp)->tx_pending / 4)
+#define TG3_TX_WAKEUP_THRESH(tnapi) ((tnapi)->tx_pending / 4)
#define TG3_RAW_IP_ALIGN 2
@@ -153,6 +162,7 @@
MODULE_FIRMWARE(FIRMWARE_TG3TSO);
MODULE_FIRMWARE(FIRMWARE_TG3TSO5);
+#define TG3_RSS_MIN_NUM_MSIX_VECS 2
static int tg3_debug = -1; /* -1 == use TG3_DEF_MSG_ENABLE as value */
module_param(tg3_debug, int, 0);
@@ -219,11 +229,12 @@
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5761E)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5761S)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5761SE)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5785)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5785_G)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5785_F)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57780)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57760)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57790)},
- {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57720)},
+ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57788)},
{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
@@ -605,39 +616,47 @@
static void tg3_disable_ints(struct tg3 *tp)
{
+ int i;
+
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT));
- tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
-}
-
-static inline void tg3_cond_int(struct tg3 *tp)
-{
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
- (tp->hw_status->status & SD_STATUS_UPDATED))
- tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
- else
- tw32(HOSTCC_MODE, tp->coalesce_mode |
- (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
+ for (i = 0; i < tp->irq_max; i++)
+ tw32_mailbox_f(tp->napi[i].int_mbox, 0x00000001);
}
static void tg3_enable_ints(struct tg3 *tp)
{
+ int i;
+ u32 coal_now = 0;
+
tp->irq_sync = 0;
wmb();
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
- tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- (tp->last_tag << 24));
- if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
- tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- (tp->last_tag << 24));
- tg3_cond_int(tp);
+
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
+ if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
+ tw32_mailbox_f(tnapi->int_mbox, tnapi->last_tag << 24);
+
+ coal_now |= tnapi->coal_now;
+ }
+
+ /* Force an initial interrupt */
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
+ (tp->napi[0].hw_status->status & SD_STATUS_UPDATED))
+ tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
+ else
+ tw32(HOSTCC_MODE, tp->coalesce_mode |
+ HOSTCC_MODE_ENABLE | coal_now);
}
-static inline unsigned int tg3_has_work(struct tg3 *tp)
+static inline unsigned int tg3_has_work(struct tg3_napi *tnapi)
{
- struct tg3_hw_status *sblk = tp->hw_status;
+ struct tg3 *tp = tnapi->tp;
+ struct tg3_hw_status *sblk = tnapi->hw_status;
unsigned int work_exists = 0;
/* check for phy events */
@@ -648,22 +667,23 @@
work_exists = 1;
}
/* check for RX/TX work to do */
- if (sblk->idx[0].tx_consumer != tp->tx_cons ||
- sblk->idx[0].rx_producer != tp->rx_rcb_ptr)
+ if (sblk->idx[0].tx_consumer != tnapi->tx_cons ||
+ *(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr)
work_exists = 1;
return work_exists;
}
-/* tg3_restart_ints
+/* tg3_int_reenable
* similar to tg3_enable_ints, but it accurately determines whether there
* is new work pending and can return without flushing the PIO write
* which reenables interrupts
*/
-static void tg3_restart_ints(struct tg3 *tp)
+static void tg3_int_reenable(struct tg3_napi *tnapi)
{
- tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
- tp->last_tag << 24);
+ struct tg3 *tp = tnapi->tp;
+
+ tw32_mailbox(tnapi->int_mbox, tnapi->last_tag << 24);
mmiowb();
/* When doing tagged status, this work check is unnecessary.
@@ -671,39 +691,58 @@
* work we've completed.
*/
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
- tg3_has_work(tp))
+ tg3_has_work(tnapi))
tw32(HOSTCC_MODE, tp->coalesce_mode |
- (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
+ HOSTCC_MODE_ENABLE | tnapi->coal_now);
+}
+
+static void tg3_napi_disable(struct tg3 *tp)
+{
+ int i;
+
+ for (i = tp->irq_cnt - 1; i >= 0; i--)
+ napi_disable(&tp->napi[i].napi);
+}
+
+static void tg3_napi_enable(struct tg3 *tp)
+{
+ int i;
+
+ for (i = 0; i < tp->irq_cnt; i++)
+ napi_enable(&tp->napi[i].napi);
}
static inline void tg3_netif_stop(struct tg3 *tp)
{
tp->dev->trans_start = jiffies; /* prevent tx timeout */
- napi_disable(&tp->napi);
+ tg3_napi_disable(tp);
netif_tx_disable(tp->dev);
}
static inline void tg3_netif_start(struct tg3 *tp)
{
- netif_wake_queue(tp->dev);
- /* NOTE: unconditional netif_wake_queue is only appropriate
- * so long as all callers are assured to have free tx slots
- * (such as after tg3_init_hw)
+ /* NOTE: unconditional netif_tx_wake_all_queues is only
+ * appropriate so long as all callers are assured to
+ * have free tx slots (such as after tg3_init_hw)
*/
- napi_enable(&tp->napi);
- tp->hw_status->status |= SD_STATUS_UPDATED;
+ netif_tx_wake_all_queues(tp->dev);
+
+ tg3_napi_enable(tp);
+ tp->napi[0].hw_status->status |= SD_STATUS_UPDATED;
tg3_enable_ints(tp);
}
static void tg3_switch_clocks(struct tg3 *tp)
{
- u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
+ u32 clock_ctrl;
u32 orig_clock_ctrl;
if ((tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
return;
+ clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
+
orig_clock_ctrl = clock_ctrl;
clock_ctrl &= (CLOCK_CTRL_FORCE_CLKRUN |
CLOCK_CTRL_CLKRUN_OENABLE |
@@ -743,7 +782,7 @@
*val = 0x0;
- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -784,7 +823,7 @@
unsigned int loops;
int ret;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
+ if ((tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
(reg == MII_TG3_CTRL || reg == MII_TG3_AUX_CTRL))
return 0;
@@ -794,7 +833,7 @@
udelay(80);
}
- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
+ frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
@@ -917,7 +956,9 @@
tw32(MAC_PHYCFG2, val);
val = tr32(MAC_PHYCFG1);
- val &= ~MAC_PHYCFG1_RGMII_INT;
+ val &= ~(MAC_PHYCFG1_RGMII_INT |
+ MAC_PHYCFG1_RXCLK_TO_MASK | MAC_PHYCFG1_TXCLK_TO_MASK);
+ val |= MAC_PHYCFG1_RXCLK_TIMEOUT | MAC_PHYCFG1_TXCLK_TIMEOUT;
tw32(MAC_PHYCFG1, val);
return;
@@ -933,15 +974,18 @@
tw32(MAC_PHYCFG2, val);
- val = tr32(MAC_PHYCFG1) & ~(MAC_PHYCFG1_RGMII_EXT_RX_DEC |
- MAC_PHYCFG1_RGMII_SND_STAT_EN);
- if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE) {
+ val = tr32(MAC_PHYCFG1);
+ val &= ~(MAC_PHYCFG1_RXCLK_TO_MASK | MAC_PHYCFG1_TXCLK_TO_MASK |
+ MAC_PHYCFG1_RGMII_EXT_RX_DEC | MAC_PHYCFG1_RGMII_SND_STAT_EN);
+ if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)) {
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
val |= MAC_PHYCFG1_RGMII_EXT_RX_DEC;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
val |= MAC_PHYCFG1_RGMII_SND_STAT_EN;
}
- tw32(MAC_PHYCFG1, val | MAC_PHYCFG1_RGMII_INT | MAC_PHYCFG1_TXC_DRV);
+ val |= MAC_PHYCFG1_RXCLK_TIMEOUT | MAC_PHYCFG1_TXCLK_TIMEOUT |
+ MAC_PHYCFG1_RGMII_INT | MAC_PHYCFG1_TXC_DRV;
+ tw32(MAC_PHYCFG1, val);
val = tr32(MAC_EXT_RGMII_MODE);
val &= ~(MAC_RGMII_MODE_RX_INT_B |
@@ -977,6 +1021,21 @@
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ u32 funcnum, is_serdes;
+
+ funcnum = tr32(TG3_CPMU_STATUS) & TG3_CPMU_STATUS_PCIE_FUNC;
+ if (funcnum)
+ tp->phy_addr = 2;
+ else
+ tp->phy_addr = 1;
+
+ is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+ if (is_serdes)
+ tp->phy_addr += 7;
+ } else
+ tp->phy_addr = PHY_ADDR;
+
if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
tg3_mdio_config_5785(tp);
@@ -1064,6 +1123,7 @@
case TG3_PHY_ID_RTL8201E:
case TG3_PHY_ID_BCMAC131:
phydev->interface = PHY_INTERFACE_MODE_MII;
+ tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
break;
}
@@ -1469,14 +1529,38 @@
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
}
+static void tg3_phy_fet_toggle_apd(struct tg3 *tp, bool enable)
+{
+ u32 phytest;
+
+ if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
+ u32 phy;
+
+ tg3_writephy(tp, MII_TG3_FET_TEST,
+ phytest | MII_TG3_FET_SHADOW_EN);
+ if (!tg3_readphy(tp, MII_TG3_FET_SHDW_AUXSTAT2, &phy)) {
+ if (enable)
+ phy |= MII_TG3_FET_SHDW_AUXSTAT2_APD;
+ else
+ phy &= ~MII_TG3_FET_SHDW_AUXSTAT2_APD;
+ tg3_writephy(tp, MII_TG3_FET_SHDW_AUXSTAT2, phy);
+ }
+ tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
+ }
+}
+
static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
{
u32 reg;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
return;
+ if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+ tg3_phy_fet_toggle_apd(tp, enable);
+ return;
+ }
+
reg = MII_TG3_MISC_SHDW_WREN |
MII_TG3_MISC_SHDW_SCR5_SEL |
MII_TG3_MISC_SHDW_SCR5_LPED |
@@ -1506,20 +1590,22 @@
(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
return;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
u32 ephy;
- if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &ephy)) {
- tg3_writephy(tp, MII_TG3_EPHY_TEST,
- ephy | MII_TG3_EPHY_SHADOW_EN);
- if (!tg3_readphy(tp, MII_TG3_EPHYTST_MISCCTRL, &phy)) {
+ if (!tg3_readphy(tp, MII_TG3_FET_TEST, &ephy)) {
+ u32 reg = MII_TG3_FET_SHDW_MISCCTRL;
+
+ tg3_writephy(tp, MII_TG3_FET_TEST,
+ ephy | MII_TG3_FET_SHADOW_EN);
+ if (!tg3_readphy(tp, reg, &phy)) {
if (enable)
- phy |= MII_TG3_EPHYTST_MISCCTRL_MDIX;
+ phy |= MII_TG3_FET_SHDW_MISCCTRL_MDIX;
else
- phy &= ~MII_TG3_EPHYTST_MISCCTRL_MDIX;
- tg3_writephy(tp, MII_TG3_EPHYTST_MISCCTRL, phy);
+ phy &= ~MII_TG3_FET_SHDW_MISCCTRL_MDIX;
+ tg3_writephy(tp, reg, phy);
}
- tg3_writephy(tp, MII_TG3_EPHY_TEST, ephy);
+ tg3_writephy(tp, MII_TG3_FET_TEST, ephy);
}
} else {
phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
@@ -1888,7 +1974,7 @@
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
/* Cannot do read-modify-write on 5401 */
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
- } else if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
+ } else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
u32 phy_reg;
/* Set bit 14 with read-modify-write to preserve other bits */
@@ -1900,7 +1986,7 @@
/* Set phy register 0x10 bit 0 to high fifo elasticity to support
* jumbo frames transmission.
*/
- if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
u32 phy_reg;
if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
@@ -1910,7 +1996,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* adjust output voltage */
- tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
+ tg3_writephy(tp, MII_TG3_FET_PTEST, 0x12);
}
tg3_phy_toggle_automdix(tp, 1);
@@ -1925,8 +2011,9 @@
if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0)
return;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
struct net_device *dev_peer;
dev_peer = pci_get_drvdata(tp->pdev_peer);
@@ -2655,7 +2742,7 @@
break;
default:
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
*speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 :
SPEED_10;
*duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL :
@@ -2990,7 +3077,7 @@
if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT)
tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
- else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
+ else if (!(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
tg3_writephy(tp, MII_TG3_IMASK, ~0);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -3100,7 +3187,9 @@
tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
- } else
+ } else if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET)
+ tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
+ else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
@@ -3167,6 +3256,15 @@
pci_write_config_word(tp->pdev,
tp->pcie_cap + PCI_EXP_LNKCTL,
newlnkctl);
+ } else if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
+ u32 newreg, oldreg = tr32(TG3_PCIE_LNKCTL);
+ if (tp->link_config.active_speed == SPEED_100 ||
+ tp->link_config.active_speed == SPEED_10)
+ newreg = oldreg & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
+ else
+ newreg = oldreg | TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
+ if (newreg != oldreg)
+ tw32(TG3_PCIE_LNKCTL, newreg);
}
if (current_link_up != netif_carrier_ok(tp->dev)) {
@@ -3848,9 +3946,9 @@
else
current_link_up = tg3_setup_fiber_by_hand(tp, mac_status);
- tp->hw_status->status =
+ tp->napi[0].hw_status->status =
(SD_STATUS_UPDATED |
- (tp->hw_status->status & ~SD_STATUS_LINK_CHG));
+ (tp->napi[0].hw_status->status & ~SD_STATUS_LINK_CHG));
for (i = 0; i < 100; i++) {
tw32_f(MAC_STATUS, (MAC_STATUS_SYNC_CHANGED |
@@ -4216,24 +4314,32 @@
spin_unlock(&tp->lock);
}
-static inline u32 tg3_tx_avail(struct tg3 *tp)
+static inline u32 tg3_tx_avail(struct tg3_napi *tnapi)
{
smp_mb();
- return (tp->tx_pending -
- ((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1)));
+ return tnapi->tx_pending -
+ ((tnapi->tx_prod - tnapi->tx_cons) & (TG3_TX_RING_SIZE - 1));
}
/* Tigon3 never reports partial packet sends. So we do not
* need special logic to handle SKBs that have not had all
* of their frags sent yet, like SunGEM does.
*/
-static void tg3_tx(struct tg3 *tp)
+static void tg3_tx(struct tg3_napi *tnapi)
{
- u32 hw_idx = tp->hw_status->idx[0].tx_consumer;
- u32 sw_idx = tp->tx_cons;
+ struct tg3 *tp = tnapi->tp;
+ u32 hw_idx = tnapi->hw_status->idx[0].tx_consumer;
+ u32 sw_idx = tnapi->tx_cons;
+ struct netdev_queue *txq;
+ int index = tnapi - tp->napi;
+
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+ index--;
+
+ txq = netdev_get_tx_queue(tp->dev, index);
while (sw_idx != hw_idx) {
- struct tx_ring_info *ri = &tp->tx_buffers[sw_idx];
+ struct tx_ring_info *ri = &tnapi->tx_buffers[sw_idx];
struct sk_buff *skb = ri->skb;
int i, tx_bug = 0;
@@ -4249,7 +4355,7 @@
sw_idx = NEXT_TX(sw_idx);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- ri = &tp->tx_buffers[sw_idx];
+ ri = &tnapi->tx_buffers[sw_idx];
if (unlikely(ri->skb != NULL || sw_idx == hw_idx))
tx_bug = 1;
sw_idx = NEXT_TX(sw_idx);
@@ -4263,7 +4369,7 @@
}
}
- tp->tx_cons = sw_idx;
+ tnapi->tx_cons = sw_idx;
/* Need to make the tx_cons update visible to tg3_start_xmit()
* before checking for netif_queue_stopped(). Without the
@@ -4272,13 +4378,13 @@
*/
smp_mb();
- if (unlikely(netif_queue_stopped(tp->dev) &&
- (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp)))) {
- netif_tx_lock(tp->dev);
- if (netif_queue_stopped(tp->dev) &&
- (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp)))
- netif_wake_queue(tp->dev);
- netif_tx_unlock(tp->dev);
+ if (unlikely(netif_tx_queue_stopped(txq) &&
+ (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi)))) {
+ __netif_tx_lock(txq, smp_processor_id());
+ if (netif_tx_queue_stopped(txq) &&
+ (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi)))
+ netif_tx_wake_queue(txq);
+ __netif_tx_unlock(txq);
}
}
@@ -4293,33 +4399,35 @@
* buffers the cpu only reads the last cacheline of the RX descriptor
* (to fetch the error flags, vlan tag, checksum, and opaque cookie).
*/
-static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key,
+static int tg3_alloc_rx_skb(struct tg3_napi *tnapi, u32 opaque_key,
int src_idx, u32 dest_idx_unmasked)
{
+ struct tg3 *tp = tnapi->tp;
struct tg3_rx_buffer_desc *desc;
struct ring_info *map, *src_map;
struct sk_buff *skb;
dma_addr_t mapping;
int skb_size, dest_idx;
+ struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
src_map = NULL;
switch (opaque_key) {
case RXD_OPAQUE_RING_STD:
dest_idx = dest_idx_unmasked % TG3_RX_RING_SIZE;
- desc = &tp->rx_std[dest_idx];
- map = &tp->rx_std_buffers[dest_idx];
+ desc = &tpr->rx_std[dest_idx];
+ map = &tpr->rx_std_buffers[dest_idx];
if (src_idx >= 0)
- src_map = &tp->rx_std_buffers[src_idx];
- skb_size = tp->rx_pkt_buf_sz;
+ src_map = &tpr->rx_std_buffers[src_idx];
+ skb_size = tp->rx_pkt_map_sz;
break;
case RXD_OPAQUE_RING_JUMBO:
dest_idx = dest_idx_unmasked % TG3_RX_JUMBO_RING_SIZE;
- desc = &tp->rx_jumbo[dest_idx];
- map = &tp->rx_jumbo_buffers[dest_idx];
+ desc = &tpr->rx_jmb[dest_idx].std;
+ map = &tpr->rx_jmb_buffers[dest_idx];
if (src_idx >= 0)
- src_map = &tp->rx_jumbo_buffers[src_idx];
- skb_size = RX_JUMBO_PKT_BUF_SZ;
+ src_map = &tpr->rx_jmb_buffers[src_idx];
+ skb_size = TG3_RX_JMB_MAP_SZ;
break;
default:
@@ -4332,14 +4440,13 @@
* Callers depend upon this behavior and assume that
* we leave everything unchanged if we fail.
*/
- skb = netdev_alloc_skb(tp->dev, skb_size);
+ skb = netdev_alloc_skb(tp->dev, skb_size + tp->rx_offset);
if (skb == NULL)
return -ENOMEM;
skb_reserve(skb, tp->rx_offset);
- mapping = pci_map_single(tp->pdev, skb->data,
- skb_size - tp->rx_offset,
+ mapping = pci_map_single(tp->pdev, skb->data, skb_size,
PCI_DMA_FROMDEVICE);
map->skb = skb;
@@ -4358,28 +4465,30 @@
* members of the RX descriptor are invariant. See notes above
* tg3_alloc_rx_skb for full details.
*/
-static void tg3_recycle_rx(struct tg3 *tp, u32 opaque_key,
+static void tg3_recycle_rx(struct tg3_napi *tnapi, u32 opaque_key,
int src_idx, u32 dest_idx_unmasked)
{
+ struct tg3 *tp = tnapi->tp;
struct tg3_rx_buffer_desc *src_desc, *dest_desc;
struct ring_info *src_map, *dest_map;
int dest_idx;
+ struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
switch (opaque_key) {
case RXD_OPAQUE_RING_STD:
dest_idx = dest_idx_unmasked % TG3_RX_RING_SIZE;
- dest_desc = &tp->rx_std[dest_idx];
- dest_map = &tp->rx_std_buffers[dest_idx];
- src_desc = &tp->rx_std[src_idx];
- src_map = &tp->rx_std_buffers[src_idx];
+ dest_desc = &tpr->rx_std[dest_idx];
+ dest_map = &tpr->rx_std_buffers[dest_idx];
+ src_desc = &tpr->rx_std[src_idx];
+ src_map = &tpr->rx_std_buffers[src_idx];
break;
case RXD_OPAQUE_RING_JUMBO:
dest_idx = dest_idx_unmasked % TG3_RX_JUMBO_RING_SIZE;
- dest_desc = &tp->rx_jumbo[dest_idx];
- dest_map = &tp->rx_jumbo_buffers[dest_idx];
- src_desc = &tp->rx_jumbo[src_idx];
- src_map = &tp->rx_jumbo_buffers[src_idx];
+ dest_desc = &tpr->rx_jmb[dest_idx].std;
+ dest_map = &tpr->rx_jmb_buffers[dest_idx];
+ src_desc = &tpr->rx_jmb[src_idx].std;
+ src_map = &tpr->rx_jmb_buffers[src_idx];
break;
default:
@@ -4395,13 +4504,6 @@
src_map->skb = NULL;
}
-#if TG3_VLAN_TAG_USED
-static int tg3_vlan_rx(struct tg3 *tp, struct sk_buff *skb, u16 vlan_tag)
-{
- return vlan_gro_receive(&tp->napi, tp->vlgrp, vlan_tag, skb);
-}
-#endif
-
/* The RX ring scheme is composed of multiple rings which post fresh
* buffers to the chip, and one special ring the chip uses to report
* status back to the host.
@@ -4426,14 +4528,16 @@
* If both the host and chip were to write into the same ring, cache line
* eviction could occur since both entities want it in an exclusive state.
*/
-static int tg3_rx(struct tg3 *tp, int budget)
+static int tg3_rx(struct tg3_napi *tnapi, int budget)
{
+ struct tg3 *tp = tnapi->tp;
u32 work_mask, rx_std_posted = 0;
- u32 sw_idx = tp->rx_rcb_ptr;
+ u32 sw_idx = tnapi->rx_rcb_ptr;
u16 hw_idx;
int received;
+ struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
- hw_idx = tp->hw_status->idx[0].rx_producer;
+ hw_idx = *(tnapi->rx_rcb_prod_idx);
/*
* We need to order the read of hw_idx and the read of
* the opaque cookie.
@@ -4442,7 +4546,7 @@
work_mask = 0;
received = 0;
while (sw_idx != hw_idx && budget > 0) {
- struct tg3_rx_buffer_desc *desc = &tp->rx_rcb[sw_idx];
+ struct tg3_rx_buffer_desc *desc = &tnapi->rx_rcb[sw_idx];
unsigned int len;
struct sk_buff *skb;
dma_addr_t dma_addr;
@@ -4451,27 +4555,25 @@
desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
if (opaque_key == RXD_OPAQUE_RING_STD) {
- dma_addr = pci_unmap_addr(&tp->rx_std_buffers[desc_idx],
- mapping);
- skb = tp->rx_std_buffers[desc_idx].skb;
- post_ptr = &tp->rx_std_ptr;
+ struct ring_info *ri = &tpr->rx_std_buffers[desc_idx];
+ dma_addr = pci_unmap_addr(ri, mapping);
+ skb = ri->skb;
+ post_ptr = &tpr->rx_std_ptr;
rx_std_posted++;
} else if (opaque_key == RXD_OPAQUE_RING_JUMBO) {
- dma_addr = pci_unmap_addr(&tp->rx_jumbo_buffers[desc_idx],
- mapping);
- skb = tp->rx_jumbo_buffers[desc_idx].skb;
- post_ptr = &tp->rx_jumbo_ptr;
- }
- else {
+ struct ring_info *ri = &tpr->rx_jmb_buffers[desc_idx];
+ dma_addr = pci_unmap_addr(ri, mapping);
+ skb = ri->skb;
+ post_ptr = &tpr->rx_jmb_ptr;
+ } else
goto next_pkt_nopost;
- }
work_mask |= opaque_key;
if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
(desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) {
drop_it:
- tg3_recycle_rx(tp, opaque_key,
+ tg3_recycle_rx(tnapi, opaque_key,
desc_idx, *post_ptr);
drop_it_no_recycle:
/* Other statistics kept track of by card. */
@@ -4491,20 +4593,19 @@
) {
int skb_size;
- skb_size = tg3_alloc_rx_skb(tp, opaque_key,
+ skb_size = tg3_alloc_rx_skb(tnapi, opaque_key,
desc_idx, *post_ptr);
if (skb_size < 0)
goto drop_it;
- pci_unmap_single(tp->pdev, dma_addr,
- skb_size - tp->rx_offset,
+ pci_unmap_single(tp->pdev, dma_addr, skb_size,
PCI_DMA_FROMDEVICE);
skb_put(skb, len);
} else {
struct sk_buff *copy_skb;
- tg3_recycle_rx(tp, opaque_key,
+ tg3_recycle_rx(tnapi, opaque_key,
desc_idx, *post_ptr);
copy_skb = netdev_alloc_skb(tp->dev,
@@ -4541,11 +4642,11 @@
#if TG3_VLAN_TAG_USED
if (tp->vlgrp != NULL &&
desc->type_flags & RXD_FLAG_VLAN) {
- tg3_vlan_rx(tp, skb,
- desc->err_vlan & RXD_VLAN_MASK);
+ vlan_gro_receive(&tnapi->napi, tp->vlgrp,
+ desc->err_vlan & RXD_VLAN_MASK, skb);
} else
#endif
- napi_gro_receive(&tp->napi, skb);
+ napi_gro_receive(&tnapi->napi, skb);
received++;
budget--;
@@ -4567,23 +4668,23 @@
/* Refresh hw_idx to see if there is new work */
if (sw_idx == hw_idx) {
- hw_idx = tp->hw_status->idx[0].rx_producer;
+ hw_idx = *(tnapi->rx_rcb_prod_idx);
rmb();
}
}
/* ACK the status ring. */
- tp->rx_rcb_ptr = sw_idx;
- tw32_rx_mbox(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, sw_idx);
+ tnapi->rx_rcb_ptr = sw_idx;
+ tw32_rx_mbox(tnapi->consmbox, sw_idx);
/* Refill RX ring(s). */
if (work_mask & RXD_OPAQUE_RING_STD) {
- sw_idx = tp->rx_std_ptr % TG3_RX_RING_SIZE;
+ sw_idx = tpr->rx_std_ptr % TG3_RX_RING_SIZE;
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
sw_idx);
}
if (work_mask & RXD_OPAQUE_RING_JUMBO) {
- sw_idx = tp->rx_jumbo_ptr % TG3_RX_JUMBO_RING_SIZE;
+ sw_idx = tpr->rx_jmb_ptr % TG3_RX_JUMBO_RING_SIZE;
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
sw_idx);
}
@@ -4592,9 +4693,10 @@
return received;
}
-static int tg3_poll_work(struct tg3 *tp, int work_done, int budget)
+static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
{
- struct tg3_hw_status *sblk = tp->hw_status;
+ struct tg3 *tp = tnapi->tp;
+ struct tg3_hw_status *sblk = tnapi->hw_status;
/* handle link change and other phy events */
if (!(tp->tg3_flags &
@@ -4618,8 +4720,8 @@
}
/* run TX completion thread */
- if (sblk->idx[0].tx_consumer != tp->tx_cons) {
- tg3_tx(tp);
+ if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
+ tg3_tx(tnapi);
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
return work_done;
}
@@ -4628,20 +4730,21 @@
* All RX "locking" is done by ensuring outside
* code synchronizes with tg3->napi.poll()
*/
- if (sblk->idx[0].rx_producer != tp->rx_rcb_ptr)
- work_done += tg3_rx(tp, budget - work_done);
+ if (*(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr)
+ work_done += tg3_rx(tnapi, budget - work_done);
return work_done;
}
static int tg3_poll(struct napi_struct *napi, int budget)
{
- struct tg3 *tp = container_of(napi, struct tg3, napi);
+ struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
+ struct tg3 *tp = tnapi->tp;
int work_done = 0;
- struct tg3_hw_status *sblk = tp->hw_status;
+ struct tg3_hw_status *sblk = tnapi->hw_status;
while (1) {
- work_done = tg3_poll_work(tp, work_done, budget);
+ work_done = tg3_poll_work(tnapi, work_done, budget);
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
goto tx_recovery;
@@ -4650,19 +4753,19 @@
break;
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
- /* tp->last_tag is used in tg3_restart_ints() below
+ /* tp->last_tag is used in tg3_int_reenable() below
* to tell the hw how much work has been processed,
* so we must read it before checking for more work.
*/
- tp->last_tag = sblk->status_tag;
- tp->last_irq_tag = tp->last_tag;
+ tnapi->last_tag = sblk->status_tag;
+ tnapi->last_irq_tag = tnapi->last_tag;
rmb();
} else
sblk->status &= ~SD_STATUS_UPDATED;
- if (likely(!tg3_has_work(tp))) {
+ if (likely(!tg3_has_work(tnapi))) {
napi_complete(napi);
- tg3_restart_ints(tp);
+ tg3_int_reenable(tnapi);
break;
}
}
@@ -4678,12 +4781,15 @@
static void tg3_irq_quiesce(struct tg3 *tp)
{
+ int i;
+
BUG_ON(tp->irq_sync);
tp->irq_sync = 1;
smp_mb();
- synchronize_irq(tp->pdev->irq);
+ for (i = 0; i < tp->irq_cnt; i++)
+ synchronize_irq(tp->napi[i].irq_vec);
}
static inline int tg3_irq_sync(struct tg3 *tp)
@@ -4713,14 +4819,15 @@
*/
static irqreturn_t tg3_msi_1shot(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- struct tg3 *tp = netdev_priv(dev);
+ struct tg3_napi *tnapi = dev_id;
+ struct tg3 *tp = tnapi->tp;
- prefetch(tp->hw_status);
- prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+ prefetch(tnapi->hw_status);
+ if (tnapi->rx_rcb)
+ prefetch(&tnapi->rx_rcb[tnapi->rx_rcb_ptr]);
if (likely(!tg3_irq_sync(tp)))
- napi_schedule(&tp->napi);
+ napi_schedule(&tnapi->napi);
return IRQ_HANDLED;
}
@@ -4731,11 +4838,12 @@
*/
static irqreturn_t tg3_msi(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- struct tg3 *tp = netdev_priv(dev);
+ struct tg3_napi *tnapi = dev_id;
+ struct tg3 *tp = tnapi->tp;
- prefetch(tp->hw_status);
- prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+ prefetch(tnapi->hw_status);
+ if (tnapi->rx_rcb)
+ prefetch(&tnapi->rx_rcb[tnapi->rx_rcb_ptr]);
/*
* Writing any value to intr-mbox-0 clears PCI INTA# and
* chip-internal interrupt pending events.
@@ -4745,16 +4853,16 @@
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
if (likely(!tg3_irq_sync(tp)))
- napi_schedule(&tp->napi);
+ napi_schedule(&tnapi->napi);
return IRQ_RETVAL(1);
}
static irqreturn_t tg3_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- struct tg3 *tp = netdev_priv(dev);
- struct tg3_hw_status *sblk = tp->hw_status;
+ struct tg3_napi *tnapi = dev_id;
+ struct tg3 *tp = tnapi->tp;
+ struct tg3_hw_status *sblk = tnapi->hw_status;
unsigned int handled = 1;
/* In INTx mode, it is possible for the interrupt to arrive at
@@ -4785,9 +4893,9 @@
if (tg3_irq_sync(tp))
goto out;
sblk->status &= ~SD_STATUS_UPDATED;
- if (likely(tg3_has_work(tp))) {
- prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
- napi_schedule(&tp->napi);
+ if (likely(tg3_has_work(tnapi))) {
+ prefetch(&tnapi->rx_rcb[tnapi->rx_rcb_ptr]);
+ napi_schedule(&tnapi->napi);
} else {
/* No work, shared interrupt perhaps? re-enable
* interrupts, and flush that PCI write
@@ -4801,9 +4909,9 @@
static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- struct tg3 *tp = netdev_priv(dev);
- struct tg3_hw_status *sblk = tp->hw_status;
+ struct tg3_napi *tnapi = dev_id;
+ struct tg3 *tp = tnapi->tp;
+ struct tg3_hw_status *sblk = tnapi->hw_status;
unsigned int handled = 1;
/* In INTx mode, it is possible for the interrupt to arrive at
@@ -4811,7 +4919,7 @@
* Reading the PCI State register will confirm whether the
* interrupt is ours and will flush the status block.
*/
- if (unlikely(sblk->status_tag == tp->last_irq_tag)) {
+ if (unlikely(sblk->status_tag == tnapi->last_irq_tag)) {
if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
handled = 0;
@@ -4838,14 +4946,14 @@
* so that the above check can report that the screaming interrupts
* are unhandled. Eventually they will be silenced.
*/
- tp->last_irq_tag = sblk->status_tag;
+ tnapi->last_irq_tag = sblk->status_tag;
if (tg3_irq_sync(tp))
goto out;
- prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
+ prefetch(&tnapi->rx_rcb[tnapi->rx_rcb_ptr]);
- napi_schedule(&tp->napi);
+ napi_schedule(&tnapi->napi);
out:
return IRQ_RETVAL(handled);
@@ -4854,9 +4962,9 @@
/* ISR for interrupt test */
static irqreturn_t tg3_test_isr(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- struct tg3 *tp = netdev_priv(dev);
- struct tg3_hw_status *sblk = tp->hw_status;
+ struct tg3_napi *tnapi = dev_id;
+ struct tg3 *tp = tnapi->tp;
+ struct tg3_hw_status *sblk = tnapi->hw_status;
if ((sblk->status & SD_STATUS_UPDATED) ||
!(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
@@ -4886,7 +4994,7 @@
tg3_full_unlock(tp);
del_timer_sync(&tp->timer);
tp->irq_sync = 0;
- napi_enable(&tp->napi);
+ tg3_napi_enable(tp);
dev_close(tp->dev);
tg3_full_lock(tp, 0);
}
@@ -4896,9 +5004,11 @@
#ifdef CONFIG_NET_POLL_CONTROLLER
static void tg3_poll_controller(struct net_device *dev)
{
+ int i;
struct tg3 *tp = netdev_priv(dev);
- tg3_interrupt(tp->pdev->irq, dev);
+ for (i = 0; i < tp->irq_cnt; i++)
+ tg3_interrupt(tp->napi[i].irq_vec, dev);
}
#endif
@@ -4993,13 +5103,14 @@
#endif
}
-static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32);
+static void tg3_set_txd(struct tg3_napi *, int, dma_addr_t, int, u32, u32);
/* Workaround 4GB and 40-bit hardware DMA bugs. */
static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
u32 last_plus_one, u32 *start,
u32 base_flags, u32 mss)
{
+ struct tg3_napi *tnapi = &tp->napi[0];
struct sk_buff *new_skb;
dma_addr_t new_addr = 0;
u32 entry = *start;
@@ -5034,7 +5145,7 @@
dev_kfree_skb(new_skb);
new_skb = NULL;
} else {
- tg3_set_txd(tp, entry, new_addr, new_skb->len,
+ tg3_set_txd(tnapi, entry, new_addr, new_skb->len,
base_flags, 1 | (mss << 1));
*start = NEXT_TX(entry);
}
@@ -5043,11 +5154,10 @@
/* Now clean up the sw ring entries. */
i = 0;
while (entry != last_plus_one) {
- if (i == 0) {
- tp->tx_buffers[entry].skb = new_skb;
- } else {
- tp->tx_buffers[entry].skb = NULL;
- }
+ if (i == 0)
+ tnapi->tx_buffers[entry].skb = new_skb;
+ else
+ tnapi->tx_buffers[entry].skb = NULL;
entry = NEXT_TX(entry);
i++;
}
@@ -5058,11 +5168,11 @@
return ret;
}
-static void tg3_set_txd(struct tg3 *tp, int entry,
+static void tg3_set_txd(struct tg3_napi *tnapi, int entry,
dma_addr_t mapping, int len, u32 flags,
u32 mss_and_is_end)
{
- struct tg3_tx_buffer_desc *txd = &tp->tx_ring[entry];
+ struct tg3_tx_buffer_desc *txd = &tnapi->tx_ring[entry];
int is_end = (mss_and_is_end & 0x1);
u32 mss = (mss_and_is_end >> 1);
u32 vlan_tag = 0;
@@ -5084,23 +5194,29 @@
/* hard_start_xmit for devices that don't have any bugs and
* support TG3_FLG2_HW_TSO_2 only.
*/
-static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
u32 len, entry, base_flags, mss;
struct skb_shared_info *sp;
dma_addr_t mapping;
+ struct tg3_napi *tnapi;
+ struct netdev_queue *txq;
- len = skb_headlen(skb);
+ txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
+ tnapi = &tp->napi[skb_get_queue_mapping(skb)];
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+ tnapi++;
/* We are running in BH disabled context with netif_tx_lock
* and TX reclaim runs via tp->napi.poll inside of a software
* interrupt. Furthermore, IRQ processing runs lockless so we have
* no IRQ context deadlocks to worry about either. Rejoice!
*/
- if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
- if (!netif_queue_stopped(dev)) {
- netif_stop_queue(dev);
+ if (unlikely(tg3_tx_avail(tnapi) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (!netif_tx_queue_stopped(txq)) {
+ netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
@@ -5109,11 +5225,12 @@
return NETDEV_TX_BUSY;
}
- entry = tp->tx_prod;
+ entry = tnapi->tx_prod;
base_flags = 0;
mss = 0;
if ((mss = skb_shinfo(skb)->gso_size) != 0) {
int tcp_opt_len, ip_tcp_len;
+ u32 hdrlen;
if (skb_header_cloned(skb) &&
pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
@@ -5122,7 +5239,7 @@
}
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
- mss |= (skb_headlen(skb) - ETH_HLEN) << 9;
+ hdrlen = skb_headlen(skb) - ETH_HLEN;
else {
struct iphdr *iph = ip_hdr(skb);
@@ -5131,9 +5248,17 @@
iph->check = 0;
iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
- mss |= (ip_tcp_len + tcp_opt_len) << 9;
+ hdrlen = ip_tcp_len + tcp_opt_len;
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ mss |= (hdrlen & 0xc) << 12;
+ if (hdrlen & 0x10)
+ base_flags |= 0x00000010;
+ base_flags |= (hdrlen & 0x3e0) << 5;
+ } else
+ mss |= hdrlen << 9;
+
base_flags |= (TXD_FLAG_CPU_PRE_DMA |
TXD_FLAG_CPU_POST_DMA);
@@ -5157,9 +5282,15 @@
mapping = sp->dma_head;
- tp->tx_buffers[entry].skb = skb;
+ tnapi->tx_buffers[entry].skb = skb;
- tg3_set_txd(tp, entry, mapping, len, base_flags,
+ len = skb_headlen(skb);
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+ !mss && skb->len > ETH_DATA_LEN)
+ base_flags |= TXD_FLAG_JMB_PKT;
+
+ tg3_set_txd(tnapi, entry, mapping, len, base_flags,
(skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
entry = NEXT_TX(entry);
@@ -5174,9 +5305,9 @@
len = frag->size;
mapping = sp->dma_maps[i];
- tp->tx_buffers[entry].skb = NULL;
+ tnapi->tx_buffers[entry].skb = NULL;
- tg3_set_txd(tp, entry, mapping, len,
+ tg3_set_txd(tnapi, entry, mapping, len,
base_flags, (i == last) | (mss << 1));
entry = NEXT_TX(entry);
@@ -5184,13 +5315,13 @@
}
/* Packets are ready, update Tx producer idx local and on card. */
- tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
+ tw32_tx_mbox(tnapi->prodmbox, entry);
- tp->tx_prod = entry;
- if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
- netif_stop_queue(dev);
- if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
- netif_wake_queue(tp->dev);
+ tnapi->tx_prod = entry;
+ if (unlikely(tg3_tx_avail(tnapi) <= (MAX_SKB_FRAGS + 1))) {
+ netif_tx_stop_queue(txq);
+ if (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi))
+ netif_tx_wake_queue(txq);
}
out_unlock:
@@ -5199,7 +5330,8 @@
return NETDEV_TX_OK;
}
-static int tg3_start_xmit_dma_bug(struct sk_buff *, struct net_device *);
+static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *,
+ struct net_device *);
/* Use GSO to workaround a rare TSO bug that may be triggered when the
* TSO header is greater than 80 bytes.
@@ -5207,11 +5339,12 @@
static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
{
struct sk_buff *segs, *nskb;
+ u32 frag_cnt_est = skb_shinfo(skb)->gso_segs * 3;
/* Estimate the number of fragments in the worst case */
- if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) {
+ if (unlikely(tg3_tx_avail(&tp->napi[0]) <= frag_cnt_est)) {
netif_stop_queue(tp->dev);
- if (tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))
+ if (tg3_tx_avail(&tp->napi[0]) <= frag_cnt_est)
return NETDEV_TX_BUSY;
netif_wake_queue(tp->dev);
@@ -5237,13 +5370,15 @@
/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
* support TG3_FLG2_HW_TSO_1 or firmware TSO only.
*/
-static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
+ struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
u32 len, entry, base_flags, mss;
struct skb_shared_info *sp;
int would_hit_hwbug;
dma_addr_t mapping;
+ struct tg3_napi *tnapi = &tp->napi[0];
len = skb_headlen(skb);
@@ -5252,7 +5387,7 @@
* interrupt. Furthermore, IRQ processing runs lockless so we have
* no IRQ context deadlocks to worry about either. Rejoice!
*/
- if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (unlikely(tg3_tx_avail(tnapi) <= (skb_shinfo(skb)->nr_frags + 1))) {
if (!netif_queue_stopped(dev)) {
netif_stop_queue(dev);
@@ -5263,7 +5398,7 @@
return NETDEV_TX_BUSY;
}
- entry = tp->tx_prod;
+ entry = tnapi->tx_prod;
base_flags = 0;
if (skb->ip_summed == CHECKSUM_PARTIAL)
base_flags |= TXD_FLAG_TCPUDP_CSUM;
@@ -5333,7 +5468,7 @@
mapping = sp->dma_head;
- tp->tx_buffers[entry].skb = skb;
+ tnapi->tx_buffers[entry].skb = skb;
would_hit_hwbug = 0;
@@ -5342,7 +5477,7 @@
else if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
- tg3_set_txd(tp, entry, mapping, len, base_flags,
+ tg3_set_txd(tnapi, entry, mapping, len, base_flags,
(skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
entry = NEXT_TX(entry);
@@ -5358,7 +5493,7 @@
len = frag->size;
mapping = sp->dma_maps[i];
- tp->tx_buffers[entry].skb = NULL;
+ tnapi->tx_buffers[entry].skb = NULL;
if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
@@ -5367,10 +5502,10 @@
would_hit_hwbug = 1;
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- tg3_set_txd(tp, entry, mapping, len,
+ tg3_set_txd(tnapi, entry, mapping, len,
base_flags, (i == last)|(mss << 1));
else
- tg3_set_txd(tp, entry, mapping, len,
+ tg3_set_txd(tnapi, entry, mapping, len,
base_flags, (i == last));
entry = NEXT_TX(entry);
@@ -5395,12 +5530,12 @@
}
/* Packets are ready, update Tx producer idx local and on card. */
- tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
+ tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, entry);
- tp->tx_prod = entry;
- if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
+ tnapi->tx_prod = entry;
+ if (unlikely(tg3_tx_avail(tnapi) <= (MAX_SKB_FRAGS + 1))) {
netif_stop_queue(dev);
- if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
+ if (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi))
netif_wake_queue(tp->dev);
}
@@ -5468,6 +5603,188 @@
return err;
}
+static void tg3_rx_prodring_free(struct tg3 *tp,
+ struct tg3_rx_prodring_set *tpr)
+{
+ int i;
+ struct ring_info *rxp;
+
+ for (i = 0; i < TG3_RX_RING_SIZE; i++) {
+ rxp = &tpr->rx_std_buffers[i];
+
+ if (rxp->skb == NULL)
+ continue;
+
+ pci_unmap_single(tp->pdev,
+ pci_unmap_addr(rxp, mapping),
+ tp->rx_pkt_map_sz,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any(rxp->skb);
+ rxp->skb = NULL;
+ }
+
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+ for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
+ rxp = &tpr->rx_jmb_buffers[i];
+
+ if (rxp->skb == NULL)
+ continue;
+
+ pci_unmap_single(tp->pdev,
+ pci_unmap_addr(rxp, mapping),
+ TG3_RX_JMB_MAP_SZ,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any(rxp->skb);
+ rxp->skb = NULL;
+ }
+ }
+}
+
+/* Initialize tx/rx rings for packet processing.
+ *
+ * The chip has been shut down and the driver detached from
+ * the networking, so no interrupts or new tx packets will
+ * end up in the driver. tp->{tx,}lock are held and thus
+ * we may not sleep.
+ */
+static int tg3_rx_prodring_alloc(struct tg3 *tp,
+ struct tg3_rx_prodring_set *tpr)
+{
+ u32 i, rx_pkt_dma_sz;
+ struct tg3_napi *tnapi = &tp->napi[0];
+
+ /* Zero out all descriptors. */
+ memset(tpr->rx_std, 0, TG3_RX_RING_BYTES);
+
+ rx_pkt_dma_sz = TG3_RX_STD_DMA_SZ;
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
+ tp->dev->mtu > ETH_DATA_LEN)
+ rx_pkt_dma_sz = TG3_RX_JMB_DMA_SZ;
+ tp->rx_pkt_map_sz = TG3_RX_DMA_TO_MAP_SZ(rx_pkt_dma_sz);
+
+ /* Initialize invariants of the rings, we only set this
+ * stuff once. This works because the card does not
+ * write into the rx buffer posting rings.
+ */
+ for (i = 0; i < TG3_RX_RING_SIZE; i++) {
+ struct tg3_rx_buffer_desc *rxd;
+
+ rxd = &tpr->rx_std[i];
+ rxd->idx_len = rx_pkt_dma_sz << RXD_LEN_SHIFT;
+ rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
+ rxd->opaque = (RXD_OPAQUE_RING_STD |
+ (i << RXD_OPAQUE_INDEX_SHIFT));
+ }
+
+ /* Now allocate fresh SKBs for each rx ring. */
+ for (i = 0; i < tp->rx_pending; i++) {
+ if (tg3_alloc_rx_skb(tnapi, RXD_OPAQUE_RING_STD, -1, i) < 0) {
+ printk(KERN_WARNING PFX
+ "%s: Using a smaller RX standard ring, "
+ "only %d out of %d buffers were allocated "
+ "successfully.\n",
+ tp->dev->name, i, tp->rx_pending);
+ if (i == 0)
+ goto initfail;
+ tp->rx_pending = i;
+ break;
+ }
+ }
+
+ if (!(tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE))
+ goto done;
+
+ memset(tpr->rx_jmb, 0, TG3_RX_JUMBO_RING_BYTES);
+
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
+ for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
+ struct tg3_rx_buffer_desc *rxd;
+
+ rxd = &tpr->rx_jmb[i].std;
+ rxd->idx_len = TG3_RX_JMB_DMA_SZ << RXD_LEN_SHIFT;
+ rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT) |
+ RXD_FLAG_JUMBO;
+ rxd->opaque = (RXD_OPAQUE_RING_JUMBO |
+ (i << RXD_OPAQUE_INDEX_SHIFT));
+ }
+
+ for (i = 0; i < tp->rx_jumbo_pending; i++) {
+ if (tg3_alloc_rx_skb(tnapi, RXD_OPAQUE_RING_JUMBO,
+ -1, i) < 0) {
+ printk(KERN_WARNING PFX
+ "%s: Using a smaller RX jumbo ring, "
+ "only %d out of %d buffers were "
+ "allocated successfully.\n",
+ tp->dev->name, i, tp->rx_jumbo_pending);
+ if (i == 0)
+ goto initfail;
+ tp->rx_jumbo_pending = i;
+ break;
+ }
+ }
+ }
+
+done:
+ return 0;
+
+initfail:
+ tg3_rx_prodring_free(tp, tpr);
+ return -ENOMEM;
+}
+
+static void tg3_rx_prodring_fini(struct tg3 *tp,
+ struct tg3_rx_prodring_set *tpr)
+{
+ kfree(tpr->rx_std_buffers);
+ tpr->rx_std_buffers = NULL;
+ kfree(tpr->rx_jmb_buffers);
+ tpr->rx_jmb_buffers = NULL;
+ if (tpr->rx_std) {
+ pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES,
+ tpr->rx_std, tpr->rx_std_mapping);
+ tpr->rx_std = NULL;
+ }
+ if (tpr->rx_jmb) {
+ pci_free_consistent(tp->pdev, TG3_RX_JUMBO_RING_BYTES,
+ tpr->rx_jmb, tpr->rx_jmb_mapping);
+ tpr->rx_jmb = NULL;
+ }
+}
+
+static int tg3_rx_prodring_init(struct tg3 *tp,
+ struct tg3_rx_prodring_set *tpr)
+{
+ tpr->rx_std_buffers = kzalloc(sizeof(struct ring_info) *
+ TG3_RX_RING_SIZE, GFP_KERNEL);
+ if (!tpr->rx_std_buffers)
+ return -ENOMEM;
+
+ tpr->rx_std = pci_alloc_consistent(tp->pdev, TG3_RX_RING_BYTES,
+ &tpr->rx_std_mapping);
+ if (!tpr->rx_std)
+ goto err_out;
+
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+ tpr->rx_jmb_buffers = kzalloc(sizeof(struct ring_info) *
+ TG3_RX_JUMBO_RING_SIZE,
+ GFP_KERNEL);
+ if (!tpr->rx_jmb_buffers)
+ goto err_out;
+
+ tpr->rx_jmb = pci_alloc_consistent(tp->pdev,
+ TG3_RX_JUMBO_RING_BYTES,
+ &tpr->rx_jmb_mapping);
+ if (!tpr->rx_jmb)
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ tg3_rx_prodring_fini(tp, tpr);
+ return -ENOMEM;
+}
+
/* Free up pending packets in all rx/tx rings.
*
* The chip has been shut down and the driver detached from
@@ -5477,55 +5794,37 @@
*/
static void tg3_free_rings(struct tg3 *tp)
{
- struct ring_info *rxp;
- int i;
+ int i, j;
- for (i = 0; i < TG3_RX_RING_SIZE; i++) {
- rxp = &tp->rx_std_buffers[i];
+ for (j = 0; j < tp->irq_cnt; j++) {
+ struct tg3_napi *tnapi = &tp->napi[j];
- if (rxp->skb == NULL)
+ if (!tnapi->tx_buffers)
continue;
- pci_unmap_single(tp->pdev,
- pci_unmap_addr(rxp, mapping),
- tp->rx_pkt_buf_sz - tp->rx_offset,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb_any(rxp->skb);
- rxp->skb = NULL;
- }
- for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
- rxp = &tp->rx_jumbo_buffers[i];
+ for (i = 0; i < TG3_TX_RING_SIZE; ) {
+ struct tx_ring_info *txp;
+ struct sk_buff *skb;
- if (rxp->skb == NULL)
- continue;
- pci_unmap_single(tp->pdev,
- pci_unmap_addr(rxp, mapping),
- RX_JUMBO_PKT_BUF_SZ - tp->rx_offset,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb_any(rxp->skb);
- rxp->skb = NULL;
- }
+ txp = &tnapi->tx_buffers[i];
+ skb = txp->skb;
- for (i = 0; i < TG3_TX_RING_SIZE; ) {
- struct tx_ring_info *txp;
- struct sk_buff *skb;
+ if (skb == NULL) {
+ i++;
+ continue;
+ }
- txp = &tp->tx_buffers[i];
- skb = txp->skb;
+ skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
- if (skb == NULL) {
- i++;
- continue;
+ txp->skb = NULL;
+
+ i += skb_shinfo(skb)->nr_frags + 1;
+
+ dev_kfree_skb_any(skb);
}
-
- skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
-
- txp->skb = NULL;
-
- i += skb_shinfo(skb)->nr_frags + 1;
-
- dev_kfree_skb_any(skb);
}
+
+ tg3_rx_prodring_free(tp, &tp->prodring[0]);
}
/* Initialize tx/rx rings for packet processing.
@@ -5537,85 +5836,31 @@
*/
static int tg3_init_rings(struct tg3 *tp)
{
- u32 i;
+ int i;
/* Free up all the SKBs. */
tg3_free_rings(tp);
- /* Zero out all descriptors. */
- memset(tp->rx_std, 0, TG3_RX_RING_BYTES);
- memset(tp->rx_jumbo, 0, TG3_RX_JUMBO_RING_BYTES);
- memset(tp->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
- memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
- tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
- if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
- (tp->dev->mtu > ETH_DATA_LEN))
- tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
+ tnapi->last_tag = 0;
+ tnapi->last_irq_tag = 0;
+ tnapi->hw_status->status = 0;
+ tnapi->hw_status->status_tag = 0;
+ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
- /* Initialize invariants of the rings, we only set this
- * stuff once. This works because the card does not
- * write into the rx buffer posting rings.
- */
- for (i = 0; i < TG3_RX_RING_SIZE; i++) {
- struct tg3_rx_buffer_desc *rxd;
+ tnapi->tx_prod = 0;
+ tnapi->tx_cons = 0;
+ if (tnapi->tx_ring)
+ memset(tnapi->tx_ring, 0, TG3_TX_RING_BYTES);
- rxd = &tp->rx_std[i];
- rxd->idx_len = (tp->rx_pkt_buf_sz - tp->rx_offset - 64)
- << RXD_LEN_SHIFT;
- rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
- rxd->opaque = (RXD_OPAQUE_RING_STD |
- (i << RXD_OPAQUE_INDEX_SHIFT));
+ tnapi->rx_rcb_ptr = 0;
+ if (tnapi->rx_rcb)
+ memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
}
- if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
- for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
- struct tg3_rx_buffer_desc *rxd;
-
- rxd = &tp->rx_jumbo[i];
- rxd->idx_len = (RX_JUMBO_PKT_BUF_SZ - tp->rx_offset - 64)
- << RXD_LEN_SHIFT;
- rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT) |
- RXD_FLAG_JUMBO;
- rxd->opaque = (RXD_OPAQUE_RING_JUMBO |
- (i << RXD_OPAQUE_INDEX_SHIFT));
- }
- }
-
- /* Now allocate fresh SKBs for each rx ring. */
- for (i = 0; i < tp->rx_pending; i++) {
- if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_STD, -1, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX standard ring, "
- "only %d out of %d buffers were allocated "
- "successfully.\n",
- tp->dev->name, i, tp->rx_pending);
- if (i == 0)
- return -ENOMEM;
- tp->rx_pending = i;
- break;
- }
- }
-
- if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
- for (i = 0; i < tp->rx_jumbo_pending; i++) {
- if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO,
- -1, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX jumbo ring, "
- "only %d out of %d buffers were "
- "allocated successfully.\n",
- tp->dev->name, i, tp->rx_jumbo_pending);
- if (i == 0) {
- tg3_free_rings(tp);
- return -ENOMEM;
- }
- tp->rx_jumbo_pending = i;
- break;
- }
- }
- }
- return 0;
+ return tg3_rx_prodring_alloc(tp, &tp->prodring[0]);
}
/*
@@ -5624,38 +5869,42 @@
*/
static void tg3_free_consistent(struct tg3 *tp)
{
- kfree(tp->rx_std_buffers);
- tp->rx_std_buffers = NULL;
- if (tp->rx_std) {
- pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES,
- tp->rx_std, tp->rx_std_mapping);
- tp->rx_std = NULL;
+ int i;
+
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+
+ if (tnapi->tx_ring) {
+ pci_free_consistent(tp->pdev, TG3_TX_RING_BYTES,
+ tnapi->tx_ring, tnapi->tx_desc_mapping);
+ tnapi->tx_ring = NULL;
+ }
+
+ kfree(tnapi->tx_buffers);
+ tnapi->tx_buffers = NULL;
+
+ if (tnapi->rx_rcb) {
+ pci_free_consistent(tp->pdev, TG3_RX_RCB_RING_BYTES(tp),
+ tnapi->rx_rcb,
+ tnapi->rx_rcb_mapping);
+ tnapi->rx_rcb = NULL;
+ }
+
+ if (tnapi->hw_status) {
+ pci_free_consistent(tp->pdev, TG3_HW_STATUS_SIZE,
+ tnapi->hw_status,
+ tnapi->status_mapping);
+ tnapi->hw_status = NULL;
+ }
}
- if (tp->rx_jumbo) {
- pci_free_consistent(tp->pdev, TG3_RX_JUMBO_RING_BYTES,
- tp->rx_jumbo, tp->rx_jumbo_mapping);
- tp->rx_jumbo = NULL;
- }
- if (tp->rx_rcb) {
- pci_free_consistent(tp->pdev, TG3_RX_RCB_RING_BYTES(tp),
- tp->rx_rcb, tp->rx_rcb_mapping);
- tp->rx_rcb = NULL;
- }
- if (tp->tx_ring) {
- pci_free_consistent(tp->pdev, TG3_TX_RING_BYTES,
- tp->tx_ring, tp->tx_desc_mapping);
- tp->tx_ring = NULL;
- }
- if (tp->hw_status) {
- pci_free_consistent(tp->pdev, TG3_HW_STATUS_SIZE,
- tp->hw_status, tp->status_mapping);
- tp->hw_status = NULL;
- }
+
if (tp->hw_stats) {
pci_free_consistent(tp->pdev, sizeof(struct tg3_hw_stats),
tp->hw_stats, tp->stats_mapping);
tp->hw_stats = NULL;
}
+
+ tg3_rx_prodring_fini(tp, &tp->prodring[0]);
}
/*
@@ -5664,55 +5913,80 @@
*/
static int tg3_alloc_consistent(struct tg3 *tp)
{
- tp->rx_std_buffers = kzalloc((sizeof(struct ring_info) *
- (TG3_RX_RING_SIZE +
- TG3_RX_JUMBO_RING_SIZE)) +
- (sizeof(struct tx_ring_info) *
- TG3_TX_RING_SIZE),
- GFP_KERNEL);
- if (!tp->rx_std_buffers)
+ int i;
+
+ if (tg3_rx_prodring_init(tp, &tp->prodring[0]))
return -ENOMEM;
- tp->rx_jumbo_buffers = &tp->rx_std_buffers[TG3_RX_RING_SIZE];
- tp->tx_buffers = (struct tx_ring_info *)
- &tp->rx_jumbo_buffers[TG3_RX_JUMBO_RING_SIZE];
-
- tp->rx_std = pci_alloc_consistent(tp->pdev, TG3_RX_RING_BYTES,
- &tp->rx_std_mapping);
- if (!tp->rx_std)
- goto err_out;
-
- tp->rx_jumbo = pci_alloc_consistent(tp->pdev, TG3_RX_JUMBO_RING_BYTES,
- &tp->rx_jumbo_mapping);
-
- if (!tp->rx_jumbo)
- goto err_out;
-
- tp->rx_rcb = pci_alloc_consistent(tp->pdev, TG3_RX_RCB_RING_BYTES(tp),
- &tp->rx_rcb_mapping);
- if (!tp->rx_rcb)
- goto err_out;
-
- tp->tx_ring = pci_alloc_consistent(tp->pdev, TG3_TX_RING_BYTES,
- &tp->tx_desc_mapping);
- if (!tp->tx_ring)
- goto err_out;
-
- tp->hw_status = pci_alloc_consistent(tp->pdev,
- TG3_HW_STATUS_SIZE,
- &tp->status_mapping);
- if (!tp->hw_status)
- goto err_out;
-
tp->hw_stats = pci_alloc_consistent(tp->pdev,
sizeof(struct tg3_hw_stats),
&tp->stats_mapping);
if (!tp->hw_stats)
goto err_out;
- memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
memset(tp->hw_stats, 0, sizeof(struct tg3_hw_stats));
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ struct tg3_hw_status *sblk;
+
+ tnapi->hw_status = pci_alloc_consistent(tp->pdev,
+ TG3_HW_STATUS_SIZE,
+ &tnapi->status_mapping);
+ if (!tnapi->hw_status)
+ goto err_out;
+
+ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
+ sblk = tnapi->hw_status;
+
+ /*
+ * When RSS is enabled, the status block format changes
+ * slightly. The "rx_jumbo_consumer", "reserved",
+ * and "rx_mini_consumer" members get mapped to the
+ * other three rx return ring producer indexes.
+ */
+ switch (i) {
+ default:
+ tnapi->rx_rcb_prod_idx = &sblk->idx[0].rx_producer;
+ break;
+ case 2:
+ tnapi->rx_rcb_prod_idx = &sblk->rx_jumbo_consumer;
+ break;
+ case 3:
+ tnapi->rx_rcb_prod_idx = &sblk->reserved;
+ break;
+ case 4:
+ tnapi->rx_rcb_prod_idx = &sblk->rx_mini_consumer;
+ break;
+ }
+
+ /*
+ * If multivector RSS is enabled, vector 0 does not handle
+ * rx or tx interrupts. Don't allocate any resources for it.
+ */
+ if (!i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS))
+ continue;
+
+ tnapi->rx_rcb = pci_alloc_consistent(tp->pdev,
+ TG3_RX_RCB_RING_BYTES(tp),
+ &tnapi->rx_rcb_mapping);
+ if (!tnapi->rx_rcb)
+ goto err_out;
+
+ memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
+
+ tnapi->tx_buffers = kzalloc(sizeof(struct tx_ring_info) *
+ TG3_TX_RING_SIZE, GFP_KERNEL);
+ if (!tnapi->tx_buffers)
+ goto err_out;
+
+ tnapi->tx_ring = pci_alloc_consistent(tp->pdev,
+ TG3_TX_RING_BYTES,
+ &tnapi->tx_desc_mapping);
+ if (!tnapi->tx_ring)
+ goto err_out;
+ }
+
return 0;
err_out:
@@ -5823,8 +6097,11 @@
err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent);
err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent);
- if (tp->hw_status)
- memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ if (tnapi->hw_status)
+ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
+ }
if (tp->hw_stats)
memset(tp->hw_stats, 0, sizeof(struct tg3_hw_stats));
@@ -6111,7 +6388,7 @@
{
u32 val;
void (*write_op)(struct tg3 *, u32, u32);
- int err;
+ int i, err;
tg3_nvram_lock(tp);
@@ -6151,14 +6428,24 @@
* sharing or irqpoll.
*/
tp->tg3_flags |= TG3_FLAG_CHIP_RESETTING;
- if (tp->hw_status) {
- tp->hw_status->status = 0;
- tp->hw_status->status_tag = 0;
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ if (tnapi->hw_status) {
+ tnapi->hw_status->status = 0;
+ tnapi->hw_status->status_tag = 0;
+ }
+ tnapi->last_tag = 0;
+ tnapi->last_irq_tag = 0;
}
- tp->last_tag = 0;
- tp->last_irq_tag = 0;
smp_mb();
- synchronize_irq(tp->pdev->irq);
+
+ for (i = 0; i < tp->irq_cnt; i++)
+ synchronize_irq(tp->napi[i].irq_vec);
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
+ val = tr32(TG3_PCIE_LNKCTL) & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
+ tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
+ }
/* do the reset */
val = GRC_MISC_CFG_CORECLK_RESET;
@@ -6212,6 +6499,8 @@
udelay(120);
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && tp->pcie_cap) {
+ u16 val16;
+
if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A0) {
int i;
u32 cfg_val;
@@ -6225,12 +6514,22 @@
cfg_val | (1 << 15));
}
- /* Set PCIE max payload size to 128 bytes and
- * clear the "no snoop" and "relaxed ordering" bits.
+ /* Clear the "no snoop" and "relaxed ordering" bits. */
+ pci_read_config_word(tp->pdev,
+ tp->pcie_cap + PCI_EXP_DEVCTL,
+ &val16);
+ val16 &= ~(PCI_EXP_DEVCTL_RELAX_EN |
+ PCI_EXP_DEVCTL_NOSNOOP_EN);
+ /*
+ * Older PCIe devices only support the 128 byte
+ * MPS setting. Enforce the restriction.
*/
+ if (!(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784))
+ val16 &= ~PCI_EXP_DEVCTL_PAYLOAD;
pci_write_config_word(tp->pdev,
tp->pcie_cap + PCI_EXP_DEVCTL,
- 0);
+ val16);
pcie_set_readrq(tp->pdev, 4096);
@@ -6288,16 +6587,18 @@
tw32_f(MAC_MODE, 0);
udelay(40);
- tg3_mdio_start(tp);
-
tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
err = tg3_poll_fw(tp);
if (err)
return err;
+ tg3_mdio_start(tp);
+
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
- tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) {
+ tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
val = tr32(0x7c00);
tw32(0x7c00, val | (1 << 25));
@@ -6647,24 +6948,175 @@
static void __tg3_set_rx_mode(struct net_device *);
static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
{
- tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
- tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
- tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
- tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
- tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq);
+ int i;
+
+ if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
+ tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
+ tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
+ tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
+
+ tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
+ tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
+ tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
+ } else {
+ tw32(HOSTCC_TXCOL_TICKS, 0);
+ tw32(HOSTCC_TXMAX_FRAMES, 0);
+ tw32(HOSTCC_TXCOAL_MAXF_INT, 0);
+
+ tw32(HOSTCC_RXCOL_TICKS, 0);
+ tw32(HOSTCC_RXMAX_FRAMES, 0);
+ tw32(HOSTCC_RXCOAL_MAXF_INT, 0);
}
- tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
- tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
+
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
u32 val = ec->stats_block_coalesce_usecs;
+ tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
+ tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq);
+
if (!netif_carrier_ok(tp->dev))
val = 0;
tw32(HOSTCC_STAT_COAL_TICKS, val);
}
+
+ for (i = 0; i < tp->irq_cnt - 1; i++) {
+ u32 reg;
+
+ reg = HOSTCC_RXCOL_TICKS_VEC1 + i * 0x18;
+ tw32(reg, ec->rx_coalesce_usecs);
+ reg = HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18;
+ tw32(reg, ec->tx_coalesce_usecs);
+ reg = HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18;
+ tw32(reg, ec->rx_max_coalesced_frames);
+ reg = HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18;
+ tw32(reg, ec->tx_max_coalesced_frames);
+ reg = HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18;
+ tw32(reg, ec->rx_max_coalesced_frames_irq);
+ reg = HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18;
+ tw32(reg, ec->tx_max_coalesced_frames_irq);
+ }
+
+ for (; i < tp->irq_max - 1; i++) {
+ tw32(HOSTCC_RXCOL_TICKS_VEC1 + i * 0x18, 0);
+ tw32(HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18, 0);
+ tw32(HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18, 0);
+ tw32(HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18, 0);
+ tw32(HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
+ tw32(HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
+ }
+}
+
+/* tp->lock is held. */
+static void tg3_rings_reset(struct tg3 *tp)
+{
+ int i;
+ u32 stblk, txrcb, rxrcb, limit;
+ struct tg3_napi *tnapi = &tp->napi[0];
+
+ /* Disable all transmit rings but the first. */
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16;
+ else
+ limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE;
+
+ for (txrcb = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE;
+ txrcb < limit; txrcb += TG3_BDINFO_SIZE)
+ tg3_write_mem(tp, txrcb + TG3_BDINFO_MAXLEN_FLAGS,
+ BDINFO_FLAGS_DISABLED);
+
+
+ /* Disable all receive return rings but the first. */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17;
+ else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16;
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
+ limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4;
+ else
+ limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE;
+
+ for (rxrcb = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE;
+ rxrcb < limit; rxrcb += TG3_BDINFO_SIZE)
+ tg3_write_mem(tp, rxrcb + TG3_BDINFO_MAXLEN_FLAGS,
+ BDINFO_FLAGS_DISABLED);
+
+ /* Disable interrupts */
+ tw32_mailbox_f(tp->napi[0].int_mbox, 1);
+
+ /* Zero mailbox registers. */
+ if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) {
+ for (i = 1; i < TG3_IRQ_MAX_VECS; i++) {
+ tp->napi[i].tx_prod = 0;
+ tp->napi[i].tx_cons = 0;
+ tw32_mailbox(tp->napi[i].prodmbox, 0);
+ tw32_rx_mbox(tp->napi[i].consmbox, 0);
+ tw32_mailbox_f(tp->napi[i].int_mbox, 1);
+ }
+ } else {
+ tp->napi[0].tx_prod = 0;
+ tp->napi[0].tx_cons = 0;
+ tw32_mailbox(tp->napi[0].prodmbox, 0);
+ tw32_rx_mbox(tp->napi[0].consmbox, 0);
+ }
+
+ /* Make sure the NIC-based send BD rings are disabled. */
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ u32 mbox = MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW;
+ for (i = 0; i < 16; i++)
+ tw32_tx_mbox(mbox + i * 8, 0);
+ }
+
+ txrcb = NIC_SRAM_SEND_RCB;
+ rxrcb = NIC_SRAM_RCV_RET_RCB;
+
+ /* Clear status block in ram. */
+ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
+
+ /* Set status block DMA address */
+ tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
+ ((u64) tnapi->status_mapping >> 32));
+ tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
+ ((u64) tnapi->status_mapping & 0xffffffff));
+
+ if (tnapi->tx_ring) {
+ tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
+ (TG3_TX_RING_SIZE <<
+ BDINFO_FLAGS_MAXLEN_SHIFT),
+ NIC_SRAM_TX_BUFFER_DESC);
+ txrcb += TG3_BDINFO_SIZE;
+ }
+
+ if (tnapi->rx_rcb) {
+ tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
+ (TG3_RX_RCB_RING_SIZE(tp) <<
+ BDINFO_FLAGS_MAXLEN_SHIFT), 0);
+ rxrcb += TG3_BDINFO_SIZE;
+ }
+
+ stblk = HOSTCC_STATBLCK_RING1;
+
+ for (i = 1, tnapi++; i < tp->irq_cnt; i++, tnapi++) {
+ u64 mapping = (u64)tnapi->status_mapping;
+ tw32(stblk + TG3_64BIT_REG_HIGH, mapping >> 32);
+ tw32(stblk + TG3_64BIT_REG_LOW, mapping & 0xffffffff);
+
+ /* Clear status block in ram. */
+ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
+
+ tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
+ (TG3_TX_RING_SIZE <<
+ BDINFO_FLAGS_MAXLEN_SHIFT),
+ NIC_SRAM_TX_BUFFER_DESC);
+
+ tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
+ (TG3_RX_RCB_RING_SIZE(tp) <<
+ BDINFO_FLAGS_MAXLEN_SHIFT), 0);
+
+ stblk += 8;
+ txrcb += TG3_BDINFO_SIZE;
+ rxrcb += TG3_BDINFO_SIZE;
+ }
}
/* tp->lock is held. */
@@ -6672,6 +7124,7 @@
{
u32 val, rdmac_mode;
int i, err, limit;
+ struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
tg3_disable_ints(tp);
@@ -6719,6 +7172,20 @@
val |= PCIE_PWR_MGMT_EXT_ASPM_TMR_EN |
PCIE_PWR_MGMT_L1_THRESH_4MS;
tw32(PCIE_PWR_MGMT_THRESH, val);
+
+ val = tr32(TG3_PCIE_EIDLE_DELAY) & ~TG3_PCIE_EIDLE_DELAY_MASK;
+ tw32(TG3_PCIE_EIDLE_DELAY, val | TG3_PCIE_EIDLE_DELAY_13_CLKS);
+
+ tw32(TG3_CORR_ERR_STAT, TG3_CORR_ERR_STAT_CLEAR);
+ }
+
+ if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
+ val = tr32(TG3_PCIE_LNKCTL);
+ if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG)
+ val |= TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
+ else
+ val &= ~TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
+ tw32(TG3_PCIE_LNKCTL, val);
}
/* This works around an issue with Athlon chipsets on
@@ -6766,7 +7233,8 @@
return err;
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
/* This value is determined during the probe time DMA
* engine test, tg3_test_dma.
*/
@@ -6886,35 +7354,33 @@
* configurable.
*/
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
- ((u64) tp->rx_std_mapping >> 32));
+ ((u64) tpr->rx_std_mapping >> 32));
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
- ((u64) tp->rx_std_mapping & 0xffffffff));
+ ((u64) tpr->rx_std_mapping & 0xffffffff));
tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_BUFFER_DESC);
- /* Don't even try to program the JUMBO/MINI buffer descriptor
- * configs on 5705.
- */
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
- tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS,
- RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT);
- } else {
- tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS,
- RX_STD_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT);
-
+ /* Disable the mini ring */
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
tw32(RCVDBDI_MINI_BD + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
+ /* Program the jumbo buffer descriptor ring control
+ * blocks on those devices that have them.
+ */
+ if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) &&
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
/* Setup replenish threshold. */
tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
- ((u64) tp->rx_jumbo_mapping >> 32));
+ ((u64) tpr->rx_jmb_mapping >> 32));
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
- ((u64) tp->rx_jumbo_mapping & 0xffffffff));
+ ((u64) tpr->rx_jmb_mapping & 0xffffffff));
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
- RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT);
+ (RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT) |
+ BDINFO_FLAGS_USE_EXT_RECV);
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
NIC_SRAM_RX_JUMBO_BUFFER_DESC);
} else {
@@ -6922,57 +7388,31 @@
BDINFO_FLAGS_DISABLED);
}
- }
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ val = (RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT) |
+ (RX_STD_MAX_SIZE << 2);
+ else
+ val = RX_STD_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT;
+ } else
+ val = RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT;
- /* There is only one send ring on 5705/5750, no need to explicitly
- * disable the others.
- */
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- /* Clear out send RCB ring in SRAM. */
- for (i = NIC_SRAM_SEND_RCB; i < NIC_SRAM_RCV_RET_RCB; i += TG3_BDINFO_SIZE)
- tg3_write_mem(tp, i + TG3_BDINFO_MAXLEN_FLAGS,
- BDINFO_FLAGS_DISABLED);
- }
+ tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, val);
- tp->tx_prod = 0;
- tp->tx_cons = 0;
- tw32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
- tw32_tx_mbox(MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
-
- tg3_set_bdinfo(tp, NIC_SRAM_SEND_RCB,
- tp->tx_desc_mapping,
- (TG3_TX_RING_SIZE <<
- BDINFO_FLAGS_MAXLEN_SHIFT),
- NIC_SRAM_TX_BUFFER_DESC);
-
- /* There is only one receive return ring on 5705/5750, no need
- * to explicitly disable the others.
- */
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- for (i = NIC_SRAM_RCV_RET_RCB; i < NIC_SRAM_STATS_BLK;
- i += TG3_BDINFO_SIZE) {
- tg3_write_mem(tp, i + TG3_BDINFO_MAXLEN_FLAGS,
- BDINFO_FLAGS_DISABLED);
- }
- }
-
- tp->rx_rcb_ptr = 0;
- tw32_rx_mbox(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, 0);
-
- tg3_set_bdinfo(tp, NIC_SRAM_RCV_RET_RCB,
- tp->rx_rcb_mapping,
- (TG3_RX_RCB_RING_SIZE(tp) <<
- BDINFO_FLAGS_MAXLEN_SHIFT),
- 0);
-
- tp->rx_std_ptr = tp->rx_pending;
+ tpr->rx_std_ptr = tp->rx_pending;
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
- tp->rx_std_ptr);
+ tpr->rx_std_ptr);
- tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
- tp->rx_jumbo_pending : 0;
+ tpr->rx_jmb_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
+ tp->rx_jumbo_pending : 0;
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
- tp->rx_jumbo_ptr);
+ tpr->rx_jmb_ptr);
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ tw32(STD_REPLENISH_LWM, 32);
+ tw32(JMB_REPLENISH_LWM, 16);
+ }
+
+ tg3_rings_reset(tp);
/* Initialize MAC address and backoff seed. */
__tg3_set_mac_addr(tp, 0);
@@ -7061,12 +7501,6 @@
__tg3_set_coalesce(tp, &tp->coal);
- /* set status block DMA address */
- tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
- ((u64) tp->status_mapping >> 32));
- tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
- ((u64) tp->status_mapping & 0xffffffff));
-
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
/* Status/statistics block address. See tg3_timer,
* the tg3_periodic_fetch_stats call there, and
@@ -7077,7 +7511,16 @@
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tp->stats_mapping & 0xffffffff));
tw32(HOSTCC_STATS_BLK_NIC_ADDR, NIC_SRAM_STATS_BLK);
+
tw32(HOSTCC_STATUS_BLK_NIC_ADDR, NIC_SRAM_STATUS_BLK);
+
+ /* Clear statistics and status block memory areas */
+ for (i = NIC_SRAM_STATS_BLK;
+ i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
+ i += sizeof(u32)) {
+ tg3_write_mem(tp, i, 0);
+ udelay(40);
+ }
}
tw32(HOSTCC_MODE, HOSTCC_MODE_ENABLE | tp->coalesce_mode);
@@ -7087,15 +7530,6 @@
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
tw32(RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE);
- /* Clear statistics/status block in chip, and status block in ram. */
- for (i = NIC_SRAM_STATS_BLK;
- i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
- i += sizeof(u32)) {
- tg3_write_mem(tp, i, 0);
- udelay(40);
- }
- memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
-
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
/* reset to prevent losing 1st rx packet intermittently */
@@ -7147,7 +7581,11 @@
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
- tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX) {
+ val = tr32(MSGINT_MODE);
+ val |= MSGINT_MODE_MULTIVEC_EN | MSGINT_MODE_ENABLE;
+ tw32(MSGINT_MODE, val);
+ }
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
@@ -7164,7 +7602,7 @@
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
- if ((tp->tg3_flags & TG3_FLG2_TSO_CAPABLE) &&
+ if ((tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
(tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 ||
tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) {
/* nothing */
@@ -7217,7 +7655,10 @@
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
- tw32(SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE);
+ val = SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE;
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+ val |= SNDBDI_MODE_MULTI_TXQ_EN;
+ tw32(SNDBDI_MODE, val);
tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
@@ -7236,10 +7677,46 @@
tw32_f(MAC_TX_MODE, tp->tx_mode);
udelay(100);
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) {
+ u32 reg = MAC_RSS_INDIR_TBL_0;
+ u8 *ent = (u8 *)&val;
+
+ /* Setup the indirection table */
+ for (i = 0; i < TG3_RSS_INDIR_TBL_SIZE; i++) {
+ int idx = i % sizeof(val);
+
+ ent[idx] = i % (tp->irq_cnt - 1);
+ if (idx == sizeof(val) - 1) {
+ tw32(reg, val);
+ reg += 4;
+ }
+ }
+
+ /* Setup the "secret" hash key. */
+ tw32(MAC_RSS_HASH_KEY_0, 0x5f865437);
+ tw32(MAC_RSS_HASH_KEY_1, 0xe4ac62cc);
+ tw32(MAC_RSS_HASH_KEY_2, 0x50103a45);
+ tw32(MAC_RSS_HASH_KEY_3, 0x36621985);
+ tw32(MAC_RSS_HASH_KEY_4, 0xbf14c0e8);
+ tw32(MAC_RSS_HASH_KEY_5, 0x1bc27a1e);
+ tw32(MAC_RSS_HASH_KEY_6, 0x84f4b556);
+ tw32(MAC_RSS_HASH_KEY_7, 0x094ea6fe);
+ tw32(MAC_RSS_HASH_KEY_8, 0x7dda01e7);
+ tw32(MAC_RSS_HASH_KEY_9, 0xc04d7481);
+ }
+
tp->rx_mode = RX_MODE_ENABLE;
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
tp->rx_mode |= RX_MODE_IPV6_CSUM_ENABLE;
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS)
+ tp->rx_mode |= RX_MODE_RSS_ENABLE |
+ RX_MODE_RSS_ITBL_HASH_BITS_7 |
+ RX_MODE_RSS_IPV6_HASH_EN |
+ RX_MODE_RSS_TCP_IPV6_HASH_EN |
+ RX_MODE_RSS_IPV4_HASH_EN |
+ RX_MODE_RSS_TCP_IPV4_HASH_EN;
+
tw32_f(MAC_RX_MODE, tp->rx_mode);
udelay(10);
@@ -7302,7 +7779,7 @@
return err;
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
+ !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET)) {
u32 tmp;
/* Clear CRC stats. */
@@ -7449,12 +7926,12 @@
* IRQ status the mailbox/status_block protocol the chip
* uses with the cpu is race prone.
*/
- if (tp->hw_status->status & SD_STATUS_UPDATED) {
+ if (tp->napi[0].hw_status->status & SD_STATUS_UPDATED) {
tw32(GRC_LOCAL_CTRL,
tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
} else {
tw32(HOSTCC_MODE, tp->coalesce_mode |
- (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
+ HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW);
}
if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
@@ -7555,13 +8032,22 @@
add_timer(&tp->timer);
}
-static int tg3_request_irq(struct tg3 *tp)
+static int tg3_request_irq(struct tg3 *tp, int irq_num)
{
irq_handler_t fn;
unsigned long flags;
- struct net_device *dev = tp->dev;
+ char *name;
+ struct tg3_napi *tnapi = &tp->napi[irq_num];
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+ if (tp->irq_cnt == 1)
+ name = tp->dev->name;
+ else {
+ name = &tnapi->irq_lbl[0];
+ snprintf(name, IFNAMSIZ, "%s-%d", tp->dev->name, irq_num);
+ name[IFNAMSIZ-1] = 0;
+ }
+
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSI_OR_MSIX) {
fn = tg3_msi;
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
fn = tg3_msi_1shot;
@@ -7572,37 +8058,49 @@
fn = tg3_interrupt_tagged;
flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
}
- return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
+
+ return request_irq(tnapi->irq_vec, fn, flags, name, tnapi);
}
static int tg3_test_interrupt(struct tg3 *tp)
{
+ struct tg3_napi *tnapi = &tp->napi[0];
struct net_device *dev = tp->dev;
int err, i, intr_ok = 0;
+ u32 val;
if (!netif_running(dev))
return -ENODEV;
tg3_disable_ints(tp);
- free_irq(tp->pdev->irq, dev);
+ free_irq(tnapi->irq_vec, tnapi);
- err = request_irq(tp->pdev->irq, tg3_test_isr,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
+ /*
+ * Turn off MSI one shot mode. Otherwise this test has no
+ * observable way to know whether the interrupt was delivered.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+ (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+ val = tr32(MSGINT_MODE) | MSGINT_MODE_ONE_SHOT_DISABLE;
+ tw32(MSGINT_MODE, val);
+ }
+
+ err = request_irq(tnapi->irq_vec, tg3_test_isr,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, tnapi);
if (err)
return err;
- tp->hw_status->status &= ~SD_STATUS_UPDATED;
+ tnapi->hw_status->status &= ~SD_STATUS_UPDATED;
tg3_enable_ints(tp);
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
- HOSTCC_MODE_NOW);
+ tnapi->coal_now);
for (i = 0; i < 5; i++) {
u32 int_mbox, misc_host_ctrl;
- int_mbox = tr32_mailbox(MAILBOX_INTERRUPT_0 +
- TG3_64BIT_REG_LOW);
+ int_mbox = tr32_mailbox(tnapi->int_mbox);
misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
if ((int_mbox != 0) ||
@@ -7616,15 +8114,22 @@
tg3_disable_ints(tp);
- free_irq(tp->pdev->irq, dev);
+ free_irq(tnapi->irq_vec, tnapi);
- err = tg3_request_irq(tp);
+ err = tg3_request_irq(tp, 0);
if (err)
return err;
- if (intr_ok)
+ if (intr_ok) {
+ /* Reenable MSI one shot mode. */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+ (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
+ val = tr32(MSGINT_MODE) & ~MSGINT_MODE_ONE_SHOT_DISABLE;
+ tw32(MSGINT_MODE, val);
+ }
return 0;
+ }
return -EIO;
}
@@ -7634,7 +8139,6 @@
*/
static int tg3_test_msi(struct tg3 *tp)
{
- struct net_device *dev = tp->dev;
int err;
u16 pci_cmd;
@@ -7665,12 +8169,13 @@
"the PCI maintainer and include system chipset information.\n",
tp->dev->name);
- free_irq(tp->pdev->irq, dev);
+ free_irq(tp->napi[0].irq_vec, &tp->napi[0]);
+
pci_disable_msi(tp->pdev);
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
- err = tg3_request_irq(tp);
+ err = tg3_request_irq(tp, 0);
if (err)
return err;
@@ -7685,7 +8190,7 @@
tg3_full_unlock(tp);
if (err)
- free_irq(tp->pdev->irq, dev);
+ free_irq(tp->napi[0].irq_vec, &tp->napi[0]);
return err;
}
@@ -7721,10 +8226,95 @@
return 0;
}
+static bool tg3_enable_msix(struct tg3 *tp)
+{
+ int i, rc, cpus = num_online_cpus();
+ struct msix_entry msix_ent[tp->irq_max];
+
+ if (cpus == 1)
+ /* Just fallback to the simpler MSI mode. */
+ return false;
+
+ /*
+ * We want as many rx rings enabled as there are cpus.
+ * The first MSIX vector only deals with link interrupts, etc,
+ * so we add one to the number of vectors we are requesting.
+ */
+ tp->irq_cnt = min_t(unsigned, cpus + 1, tp->irq_max);
+
+ for (i = 0; i < tp->irq_max; i++) {
+ msix_ent[i].entry = i;
+ msix_ent[i].vector = 0;
+ }
+
+ rc = pci_enable_msix(tp->pdev, msix_ent, tp->irq_cnt);
+ if (rc != 0) {
+ if (rc < TG3_RSS_MIN_NUM_MSIX_VECS)
+ return false;
+ if (pci_enable_msix(tp->pdev, msix_ent, rc))
+ return false;
+ printk(KERN_NOTICE
+ "%s: Requested %d MSI-X vectors, received %d\n",
+ tp->dev->name, tp->irq_cnt, rc);
+ tp->irq_cnt = rc;
+ }
+
+ tp->tg3_flags3 |= TG3_FLG3_ENABLE_RSS;
+
+ for (i = 0; i < tp->irq_max; i++)
+ tp->napi[i].irq_vec = msix_ent[i].vector;
+
+ tp->dev->real_num_tx_queues = tp->irq_cnt - 1;
+
+ return true;
+}
+
+static void tg3_ints_init(struct tg3 *tp)
+{
+ if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSI_OR_MSIX) &&
+ !(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ /* All MSI supporting chips should support tagged
+ * status. Assert that this is the case.
+ */
+ printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
+ "Not using MSI.\n", tp->dev->name);
+ goto defcfg;
+ }
+
+ if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) && tg3_enable_msix(tp))
+ tp->tg3_flags2 |= TG3_FLG2_USING_MSIX;
+ else if ((tp->tg3_flags & TG3_FLAG_SUPPORT_MSI) &&
+ pci_enable_msi(tp->pdev) == 0)
+ tp->tg3_flags2 |= TG3_FLG2_USING_MSI;
+
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSI_OR_MSIX) {
+ u32 msi_mode = tr32(MSGINT_MODE);
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+ msi_mode |= MSGINT_MODE_MULTIVEC_EN;
+ tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE);
+ }
+defcfg:
+ if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
+ tp->irq_cnt = 1;
+ tp->napi[0].irq_vec = tp->pdev->irq;
+ tp->dev->real_num_tx_queues = 1;
+ }
+}
+
+static void tg3_ints_fini(struct tg3 *tp)
+{
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+ pci_disable_msix(tp->pdev);
+ else if (tp->tg3_flags2 & TG3_FLG2_USING_MSI)
+ pci_disable_msi(tp->pdev);
+ tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI_OR_MSIX;
+ tp->tg3_flags3 &= ~TG3_FLG3_ENABLE_RSS;
+}
+
static int tg3_open(struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
- int err;
+ int i, err;
if (tp->fw_needed) {
err = tg3_request_firmware(tp);
@@ -7755,40 +8345,33 @@
tg3_full_unlock(tp);
+ /*
+ * Setup interrupts first so we know how
+ * many NAPI resources to allocate
+ */
+ tg3_ints_init(tp);
+
/* The placement of this call is tied
* to the setup and use of Host TX descriptors.
*/
err = tg3_alloc_consistent(tp);
if (err)
- return err;
+ goto err_out1;
- if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSI) {
- /* All MSI supporting chips should support tagged
- * status. Assert that this is the case.
- */
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
- printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
- "Not using MSI.\n", tp->dev->name);
- } else if (pci_enable_msi(tp->pdev) == 0) {
- u32 msi_mode;
+ tg3_napi_enable(tp);
- msi_mode = tr32(MSGINT_MODE);
- tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE);
- tp->tg3_flags2 |= TG3_FLG2_USING_MSI;
+ for (i = 0; i < tp->irq_cnt; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ err = tg3_request_irq(tp, i);
+ if (err) {
+ for (i--; i >= 0; i--)
+ free_irq(tnapi->irq_vec, tnapi);
+ break;
}
}
- err = tg3_request_irq(tp);
- if (err) {
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
- pci_disable_msi(tp->pdev);
- tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
- }
- tg3_free_consistent(tp);
- return err;
- }
-
- napi_enable(&tp->napi);
+ if (err)
+ goto err_out2;
tg3_full_lock(tp, 0);
@@ -7816,45 +8399,28 @@
tg3_full_unlock(tp);
- if (err) {
- napi_disable(&tp->napi);
- free_irq(tp->pdev->irq, dev);
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
- pci_disable_msi(tp->pdev);
- tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
- }
- tg3_free_consistent(tp);
- return err;
- }
+ if (err)
+ goto err_out3;
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
err = tg3_test_msi(tp);
if (err) {
tg3_full_lock(tp, 0);
-
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
- pci_disable_msi(tp->pdev);
- tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
- }
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_free_rings(tp);
- tg3_free_consistent(tp);
-
tg3_full_unlock(tp);
- napi_disable(&tp->napi);
-
- return err;
+ goto err_out2;
}
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
- if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI) {
- u32 val = tr32(PCIE_TRANSACTION_CFG);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+ (tp->tg3_flags2 & TG3_FLG2_USING_MSI) &&
+ (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)) {
+ u32 val = tr32(PCIE_TRANSACTION_CFG);
- tw32(PCIE_TRANSACTION_CFG,
- val | PCIE_TRANS_CFG_1SHOT_MSI);
- }
+ tw32(PCIE_TRANSACTION_CFG,
+ val | PCIE_TRANS_CFG_1SHOT_MSI);
}
}
@@ -7868,9 +8434,23 @@
tg3_full_unlock(tp);
- netif_start_queue(dev);
+ netif_tx_start_all_queues(dev);
return 0;
+
+err_out3:
+ for (i = tp->irq_cnt - 1; i >= 0; i--) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ free_irq(tnapi->irq_vec, tnapi);
+ }
+
+err_out2:
+ tg3_napi_disable(tp);
+ tg3_free_consistent(tp);
+
+err_out1:
+ tg3_ints_fini(tp);
+ return err;
}
#if 0
@@ -7879,6 +8459,7 @@
u32 val32, val32_2, val32_3, val32_4, val32_5;
u16 val16;
int i;
+ struct tg3_hw_status *sblk = tp->napi[0]->hw_status;
pci_read_config_word(tp->pdev, PCI_STATUS, &val16);
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &val32);
@@ -8031,14 +8612,15 @@
val32, val32_2, val32_3, val32_4, val32_5);
/* SW status block */
- printk("DEBUG: Host status block [%08x:%08x:(%04x:%04x:%04x):(%04x:%04x)]\n",
- tp->hw_status->status,
- tp->hw_status->status_tag,
- tp->hw_status->rx_jumbo_consumer,
- tp->hw_status->rx_consumer,
- tp->hw_status->rx_mini_consumer,
- tp->hw_status->idx[0].rx_producer,
- tp->hw_status->idx[0].tx_consumer);
+ printk(KERN_DEBUG
+ "Host status block [%08x:%08x:(%04x:%04x:%04x):(%04x:%04x)]\n",
+ sblk->status,
+ sblk->status_tag,
+ sblk->rx_jumbo_consumer,
+ sblk->rx_consumer,
+ sblk->rx_mini_consumer,
+ sblk->idx[0].rx_producer,
+ sblk->idx[0].tx_consumer);
/* SW statistics block */
printk("DEBUG: Host statistics block [%08x:%08x:%08x:%08x]\n",
@@ -8106,12 +8688,13 @@
static int tg3_close(struct net_device *dev)
{
+ int i;
struct tg3 *tp = netdev_priv(dev);
- napi_disable(&tp->napi);
+ tg3_napi_disable(tp);
cancel_work_sync(&tp->reset_task);
- netif_stop_queue(dev);
+ netif_tx_stop_all_queues(dev);
del_timer_sync(&tp->timer);
@@ -8128,12 +8711,13 @@
tg3_full_unlock(tp);
- free_irq(tp->pdev->irq, dev);
- if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
- pci_disable_msi(tp->pdev);
- tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
+ for (i = tp->irq_cnt - 1; i >= 0; i--) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+ free_irq(tnapi->irq_vec, tnapi);
}
+ tg3_ints_fini(tp);
+
memcpy(&tp->net_stats_prev, tg3_get_stats(tp->dev),
sizeof(tp->net_stats_prev));
memcpy(&tp->estats_prev, tg3_get_estats(tp),
@@ -8697,7 +9281,7 @@
cmd->speed = tp->link_config.active_speed;
cmd->duplex = tp->link_config.active_duplex;
}
- cmd->phy_address = PHY_ADDR;
+ cmd->phy_address = tp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
cmd->autoneg = tp->link_config.autoneg;
cmd->maxtxpkt = 0;
@@ -8872,7 +9456,8 @@
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
dev->features |= NETIF_F_TSO_ECN;
} else
dev->features &= ~(NETIF_F_TSO6 | NETIF_F_TSO_ECN);
@@ -8934,13 +9519,13 @@
else
ering->rx_jumbo_pending = 0;
- ering->tx_pending = tp->tx_pending;
+ ering->tx_pending = tp->napi[0].tx_pending;
}
static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
struct tg3 *tp = netdev_priv(dev);
- int irq_sync = 0, err = 0;
+ int i, irq_sync = 0, err = 0;
if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) ||
(ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) ||
@@ -8964,7 +9549,9 @@
tp->rx_pending > 63)
tp->rx_pending = 63;
tp->rx_jumbo_pending = ering->rx_jumbo_pending;
- tp->tx_pending = ering->tx_pending;
+
+ for (i = 0; i < TG3_IRQ_MAX_VECS; i++)
+ tp->napi[i].tx_pending = ering->tx_pending;
if (netif_running(dev)) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@@ -9672,12 +10259,23 @@
static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
{
u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
- u32 desc_idx;
+ u32 desc_idx, coal_now;
struct sk_buff *skb, *rx_skb;
u8 *tx_data;
dma_addr_t map;
int num_pkts, tx_len, rx_len, i, err;
struct tg3_rx_buffer_desc *desc;
+ struct tg3_napi *tnapi, *rnapi;
+ struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
+
+ if (tp->irq_cnt > 1) {
+ tnapi = &tp->napi[1];
+ rnapi = &tp->napi[1];
+ } else {
+ tnapi = &tp->napi[0];
+ rnapi = &tp->napi[0];
+ }
+ coal_now = tnapi->coal_now | rnapi->coal_now;
if (loopback_mode == TG3_MAC_LOOPBACK) {
/* HW errata - mac loopback fails in some cases on 5780.
@@ -9699,18 +10297,8 @@
} else if (loopback_mode == TG3_PHY_LOOPBACK) {
u32 val;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- u32 phytest;
-
- if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phytest)) {
- u32 phy;
-
- tg3_writephy(tp, MII_TG3_EPHY_TEST,
- phytest | MII_TG3_EPHY_SHADOW_EN);
- if (!tg3_readphy(tp, 0x1b, &phy))
- tg3_writephy(tp, 0x1b, phy & ~0x20);
- tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
- }
+ if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+ tg3_phy_fet_toggle_apd(tp, false);
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
} else
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
@@ -9721,8 +10309,9 @@
udelay(40);
mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800);
+ if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+ tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
mac_mode |= MAC_MODE_PORT_MODE_MII;
} else
mac_mode |= MAC_MODE_PORT_MODE_GMII;
@@ -9765,35 +10354,34 @@
map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
- HOSTCC_MODE_NOW);
+ rnapi->coal_now);
udelay(10);
- rx_start_idx = tp->hw_status->idx[0].rx_producer;
+ rx_start_idx = rnapi->hw_status->idx[0].rx_producer;
num_pkts = 0;
- tg3_set_txd(tp, tp->tx_prod, map, tx_len, 0, 1);
+ tg3_set_txd(tnapi, tnapi->tx_prod, map, tx_len, 0, 1);
- tp->tx_prod++;
+ tnapi->tx_prod++;
num_pkts++;
- tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW,
- tp->tx_prod);
- tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
+ tw32_tx_mbox(tnapi->prodmbox, tnapi->tx_prod);
+ tr32_mailbox(tnapi->prodmbox);
udelay(10);
/* 250 usec to allow enough time on some 10/100 Mbps devices. */
for (i = 0; i < 25; i++) {
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
- HOSTCC_MODE_NOW);
+ coal_now);
udelay(10);
- tx_idx = tp->hw_status->idx[0].tx_consumer;
- rx_idx = tp->hw_status->idx[0].rx_producer;
- if ((tx_idx == tp->tx_prod) &&
+ tx_idx = tnapi->hw_status->idx[0].tx_consumer;
+ rx_idx = rnapi->hw_status->idx[0].rx_producer;
+ if ((tx_idx == tnapi->tx_prod) &&
(rx_idx == (rx_start_idx + num_pkts)))
break;
}
@@ -9801,13 +10389,13 @@
pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE);
dev_kfree_skb(skb);
- if (tx_idx != tp->tx_prod)
+ if (tx_idx != tnapi->tx_prod)
goto out;
if (rx_idx != rx_start_idx + num_pkts)
goto out;
- desc = &tp->rx_rcb[rx_start_idx];
+ desc = &rnapi->rx_rcb[rx_start_idx];
desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
if (opaque_key != RXD_OPAQUE_RING_STD)
@@ -9821,9 +10409,9 @@
if (rx_len != tx_len)
goto out;
- rx_skb = tp->rx_std_buffers[desc_idx].skb;
+ rx_skb = tpr->rx_std_buffers[desc_idx].skb;
- map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping);
+ map = pci_unmap_addr(&tpr->rx_std_buffers[desc_idx], mapping);
pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE);
for (i = 14; i < tx_len; i++) {
@@ -9997,7 +10585,7 @@
switch(cmd) {
case SIOCGMIIPHY:
- data->phy_id = PHY_ADDR;
+ data->phy_id = tp->phy_addr;
/* fallthru */
case SIOCGMIIREG: {
@@ -10022,9 +10610,6 @@
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
break; /* We have no PHY */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
if (tp->link_config.phy_is_low_power)
return -EAGAIN;
@@ -10236,8 +10821,7 @@
nvcfg1 = tr32(NVRAM_CFG1);
if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
tp->tg3_flags2 |= TG3_FLG2_FLASH;
- }
- else {
+ } else {
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
tw32(NVRAM_CFG1, nvcfg1);
}
@@ -10245,43 +10829,69 @@
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
- case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- break;
- case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->nvram_pagesize = ATMEL_AT25F512_PAGE_SIZE;
- break;
- case FLASH_VENDOR_ATMEL_EEPROM:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- break;
- case FLASH_VENDOR_ST:
- tp->nvram_jedecnum = JEDEC_ST;
- tp->nvram_pagesize = ST_M45PEX0_PAGE_SIZE;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- break;
- case FLASH_VENDOR_SAIFUN:
- tp->nvram_jedecnum = JEDEC_SAIFUN;
- tp->nvram_pagesize = SAIFUN_SA25F0XX_PAGE_SIZE;
- break;
- case FLASH_VENDOR_SST_SMALL:
- case FLASH_VENDOR_SST_LARGE:
- tp->nvram_jedecnum = JEDEC_SST;
- tp->nvram_pagesize = SST_25VF0X0_PAGE_SIZE;
- break;
+ case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ break;
+ case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->nvram_pagesize = ATMEL_AT25F512_PAGE_SIZE;
+ break;
+ case FLASH_VENDOR_ATMEL_EEPROM:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ break;
+ case FLASH_VENDOR_ST:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->nvram_pagesize = ST_M45PEX0_PAGE_SIZE;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ break;
+ case FLASH_VENDOR_SAIFUN:
+ tp->nvram_jedecnum = JEDEC_SAIFUN;
+ tp->nvram_pagesize = SAIFUN_SA25F0XX_PAGE_SIZE;
+ break;
+ case FLASH_VENDOR_SST_SMALL:
+ case FLASH_VENDOR_SST_LARGE:
+ tp->nvram_jedecnum = JEDEC_SST;
+ tp->nvram_pagesize = SST_25VF0X0_PAGE_SIZE;
+ break;
}
- }
- else {
+ } else {
tp->nvram_jedecnum = JEDEC_ATMEL;
tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
}
}
+static void __devinit tg3_nvram_get_pagesize(struct tg3 *tp, u32 nvmcfg1)
+{
+ switch (nvmcfg1 & NVRAM_CFG1_5752PAGE_SIZE_MASK) {
+ case FLASH_5752PAGE_SIZE_256:
+ tp->nvram_pagesize = 256;
+ break;
+ case FLASH_5752PAGE_SIZE_512:
+ tp->nvram_pagesize = 512;
+ break;
+ case FLASH_5752PAGE_SIZE_1K:
+ tp->nvram_pagesize = 1024;
+ break;
+ case FLASH_5752PAGE_SIZE_2K:
+ tp->nvram_pagesize = 2048;
+ break;
+ case FLASH_5752PAGE_SIZE_4K:
+ tp->nvram_pagesize = 4096;
+ break;
+ case FLASH_5752PAGE_SIZE_264:
+ tp->nvram_pagesize = 264;
+ break;
+ case FLASH_5752PAGE_SIZE_528:
+ tp->nvram_pagesize = 528;
+ break;
+ }
+}
+
static void __devinit tg3_get_5752_nvram_info(struct tg3 *tp)
{
u32 nvcfg1;
@@ -10293,48 +10903,28 @@
tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
- case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
- case FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- break;
- case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- break;
- case FLASH_5752VENDOR_ST_M45PE10:
- case FLASH_5752VENDOR_ST_M45PE20:
- case FLASH_5752VENDOR_ST_M45PE40:
- tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- break;
+ case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
+ case FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ break;
+ case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ break;
+ case FLASH_5752VENDOR_ST_M45PE10:
+ case FLASH_5752VENDOR_ST_M45PE20:
+ case FLASH_5752VENDOR_ST_M45PE40:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ break;
}
if (tp->tg3_flags2 & TG3_FLG2_FLASH) {
- switch (nvcfg1 & NVRAM_CFG1_5752PAGE_SIZE_MASK) {
- case FLASH_5752PAGE_SIZE_256:
- tp->nvram_pagesize = 256;
- break;
- case FLASH_5752PAGE_SIZE_512:
- tp->nvram_pagesize = 512;
- break;
- case FLASH_5752PAGE_SIZE_1K:
- tp->nvram_pagesize = 1024;
- break;
- case FLASH_5752PAGE_SIZE_2K:
- tp->nvram_pagesize = 2048;
- break;
- case FLASH_5752PAGE_SIZE_4K:
- tp->nvram_pagesize = 4096;
- break;
- case FLASH_5752PAGE_SIZE_264:
- tp->nvram_pagesize = 264;
- break;
- }
- }
- else {
+ tg3_nvram_get_pagesize(tp, nvcfg1);
+ } else {
/* For eeprom, set pagesize to maximum eeprom size */
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
@@ -10357,45 +10947,45 @@
nvcfg1 &= NVRAM_CFG1_5752VENDOR_MASK;
switch (nvcfg1) {
- case FLASH_5755VENDOR_ATMEL_FLASH_1:
- case FLASH_5755VENDOR_ATMEL_FLASH_2:
- case FLASH_5755VENDOR_ATMEL_FLASH_3:
- case FLASH_5755VENDOR_ATMEL_FLASH_5:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->nvram_pagesize = 264;
- if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
- nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
- tp->nvram_size = (protect ? 0x3e200 :
- TG3_NVRAM_SIZE_512KB);
- else if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_2)
- tp->nvram_size = (protect ? 0x1f200 :
- TG3_NVRAM_SIZE_256KB);
- else
- tp->nvram_size = (protect ? 0x1f200 :
- TG3_NVRAM_SIZE_128KB);
- break;
- case FLASH_5752VENDOR_ST_M45PE10:
- case FLASH_5752VENDOR_ST_M45PE20:
- case FLASH_5752VENDOR_ST_M45PE40:
- tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->nvram_pagesize = 256;
- if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE10)
- tp->nvram_size = (protect ?
- TG3_NVRAM_SIZE_64KB :
- TG3_NVRAM_SIZE_128KB);
- else if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE20)
- tp->nvram_size = (protect ?
- TG3_NVRAM_SIZE_64KB :
- TG3_NVRAM_SIZE_256KB);
- else
- tp->nvram_size = (protect ?
- TG3_NVRAM_SIZE_128KB :
- TG3_NVRAM_SIZE_512KB);
- break;
+ case FLASH_5755VENDOR_ATMEL_FLASH_1:
+ case FLASH_5755VENDOR_ATMEL_FLASH_2:
+ case FLASH_5755VENDOR_ATMEL_FLASH_3:
+ case FLASH_5755VENDOR_ATMEL_FLASH_5:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tp->nvram_pagesize = 264;
+ if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
+ nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
+ tp->nvram_size = (protect ? 0x3e200 :
+ TG3_NVRAM_SIZE_512KB);
+ else if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_2)
+ tp->nvram_size = (protect ? 0x1f200 :
+ TG3_NVRAM_SIZE_256KB);
+ else
+ tp->nvram_size = (protect ? 0x1f200 :
+ TG3_NVRAM_SIZE_128KB);
+ break;
+ case FLASH_5752VENDOR_ST_M45PE10:
+ case FLASH_5752VENDOR_ST_M45PE20:
+ case FLASH_5752VENDOR_ST_M45PE40:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tp->nvram_pagesize = 256;
+ if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE10)
+ tp->nvram_size = (protect ?
+ TG3_NVRAM_SIZE_64KB :
+ TG3_NVRAM_SIZE_128KB);
+ else if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE20)
+ tp->nvram_size = (protect ?
+ TG3_NVRAM_SIZE_64KB :
+ TG3_NVRAM_SIZE_256KB);
+ else
+ tp->nvram_size = (protect ?
+ TG3_NVRAM_SIZE_128KB :
+ TG3_NVRAM_SIZE_512KB);
+ break;
}
}
@@ -10406,34 +10996,34 @@
nvcfg1 = tr32(NVRAM_CFG1);
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
- case FLASH_5787VENDOR_ATMEL_EEPROM_64KHZ:
- case FLASH_5787VENDOR_ATMEL_EEPROM_376KHZ:
- case FLASH_5787VENDOR_MICRO_EEPROM_64KHZ:
- case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
+ case FLASH_5787VENDOR_ATMEL_EEPROM_64KHZ:
+ case FLASH_5787VENDOR_ATMEL_EEPROM_376KHZ:
+ case FLASH_5787VENDOR_MICRO_EEPROM_64KHZ:
+ case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
- nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
- tw32(NVRAM_CFG1, nvcfg1);
- break;
- case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
- case FLASH_5755VENDOR_ATMEL_FLASH_1:
- case FLASH_5755VENDOR_ATMEL_FLASH_2:
- case FLASH_5755VENDOR_ATMEL_FLASH_3:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->nvram_pagesize = 264;
- break;
- case FLASH_5752VENDOR_ST_M45PE10:
- case FLASH_5752VENDOR_ST_M45PE20:
- case FLASH_5752VENDOR_ST_M45PE40:
- tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->nvram_pagesize = 256;
- break;
+ nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
+ tw32(NVRAM_CFG1, nvcfg1);
+ break;
+ case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
+ case FLASH_5755VENDOR_ATMEL_FLASH_1:
+ case FLASH_5755VENDOR_ATMEL_FLASH_2:
+ case FLASH_5755VENDOR_ATMEL_FLASH_3:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tp->nvram_pagesize = 264;
+ break;
+ case FLASH_5752VENDOR_ST_M45PE10:
+ case FLASH_5752VENDOR_ST_M45PE20:
+ case FLASH_5752VENDOR_ST_M45PE40:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tp->nvram_pagesize = 256;
+ break;
}
}
@@ -10451,63 +11041,63 @@
nvcfg1 &= NVRAM_CFG1_5752VENDOR_MASK;
switch (nvcfg1) {
- case FLASH_5761VENDOR_ATMEL_ADB021D:
- case FLASH_5761VENDOR_ATMEL_ADB041D:
- case FLASH_5761VENDOR_ATMEL_ADB081D:
- case FLASH_5761VENDOR_ATMEL_ADB161D:
- case FLASH_5761VENDOR_ATMEL_MDB021D:
- case FLASH_5761VENDOR_ATMEL_MDB041D:
- case FLASH_5761VENDOR_ATMEL_MDB081D:
- case FLASH_5761VENDOR_ATMEL_MDB161D:
- tp->nvram_jedecnum = JEDEC_ATMEL;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
- tp->nvram_pagesize = 256;
- break;
- case FLASH_5761VENDOR_ST_A_M45PE20:
- case FLASH_5761VENDOR_ST_A_M45PE40:
- case FLASH_5761VENDOR_ST_A_M45PE80:
- case FLASH_5761VENDOR_ST_A_M45PE16:
- case FLASH_5761VENDOR_ST_M_M45PE20:
- case FLASH_5761VENDOR_ST_M_M45PE40:
- case FLASH_5761VENDOR_ST_M_M45PE80:
- case FLASH_5761VENDOR_ST_M_M45PE16:
- tp->nvram_jedecnum = JEDEC_ST;
- tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
- tp->tg3_flags2 |= TG3_FLG2_FLASH;
- tp->nvram_pagesize = 256;
- break;
+ case FLASH_5761VENDOR_ATMEL_ADB021D:
+ case FLASH_5761VENDOR_ATMEL_ADB041D:
+ case FLASH_5761VENDOR_ATMEL_ADB081D:
+ case FLASH_5761VENDOR_ATMEL_ADB161D:
+ case FLASH_5761VENDOR_ATMEL_MDB021D:
+ case FLASH_5761VENDOR_ATMEL_MDB041D:
+ case FLASH_5761VENDOR_ATMEL_MDB081D:
+ case FLASH_5761VENDOR_ATMEL_MDB161D:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
+ tp->nvram_pagesize = 256;
+ break;
+ case FLASH_5761VENDOR_ST_A_M45PE20:
+ case FLASH_5761VENDOR_ST_A_M45PE40:
+ case FLASH_5761VENDOR_ST_A_M45PE80:
+ case FLASH_5761VENDOR_ST_A_M45PE16:
+ case FLASH_5761VENDOR_ST_M_M45PE20:
+ case FLASH_5761VENDOR_ST_M_M45PE40:
+ case FLASH_5761VENDOR_ST_M_M45PE80:
+ case FLASH_5761VENDOR_ST_M_M45PE16:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+ tp->nvram_pagesize = 256;
+ break;
}
if (protect) {
tp->nvram_size = tr32(NVRAM_ADDR_LOCKOUT);
} else {
switch (nvcfg1) {
- case FLASH_5761VENDOR_ATMEL_ADB161D:
- case FLASH_5761VENDOR_ATMEL_MDB161D:
- case FLASH_5761VENDOR_ST_A_M45PE16:
- case FLASH_5761VENDOR_ST_M_M45PE16:
- tp->nvram_size = TG3_NVRAM_SIZE_2MB;
- break;
- case FLASH_5761VENDOR_ATMEL_ADB081D:
- case FLASH_5761VENDOR_ATMEL_MDB081D:
- case FLASH_5761VENDOR_ST_A_M45PE80:
- case FLASH_5761VENDOR_ST_M_M45PE80:
- tp->nvram_size = TG3_NVRAM_SIZE_1MB;
- break;
- case FLASH_5761VENDOR_ATMEL_ADB041D:
- case FLASH_5761VENDOR_ATMEL_MDB041D:
- case FLASH_5761VENDOR_ST_A_M45PE40:
- case FLASH_5761VENDOR_ST_M_M45PE40:
- tp->nvram_size = TG3_NVRAM_SIZE_512KB;
- break;
- case FLASH_5761VENDOR_ATMEL_ADB021D:
- case FLASH_5761VENDOR_ATMEL_MDB021D:
- case FLASH_5761VENDOR_ST_A_M45PE20:
- case FLASH_5761VENDOR_ST_M_M45PE20:
- tp->nvram_size = TG3_NVRAM_SIZE_256KB;
- break;
+ case FLASH_5761VENDOR_ATMEL_ADB161D:
+ case FLASH_5761VENDOR_ATMEL_MDB161D:
+ case FLASH_5761VENDOR_ST_A_M45PE16:
+ case FLASH_5761VENDOR_ST_M_M45PE16:
+ tp->nvram_size = TG3_NVRAM_SIZE_2MB;
+ break;
+ case FLASH_5761VENDOR_ATMEL_ADB081D:
+ case FLASH_5761VENDOR_ATMEL_MDB081D:
+ case FLASH_5761VENDOR_ST_A_M45PE80:
+ case FLASH_5761VENDOR_ST_M_M45PE80:
+ tp->nvram_size = TG3_NVRAM_SIZE_1MB;
+ break;
+ case FLASH_5761VENDOR_ATMEL_ADB041D:
+ case FLASH_5761VENDOR_ATMEL_MDB041D:
+ case FLASH_5761VENDOR_ST_A_M45PE40:
+ case FLASH_5761VENDOR_ST_M_M45PE40:
+ tp->nvram_size = TG3_NVRAM_SIZE_512KB;
+ break;
+ case FLASH_5761VENDOR_ATMEL_ADB021D:
+ case FLASH_5761VENDOR_ATMEL_MDB021D:
+ case FLASH_5761VENDOR_ST_A_M45PE20:
+ case FLASH_5761VENDOR_ST_M_M45PE20:
+ tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+ break;
}
}
}
@@ -10586,34 +11176,84 @@
return;
}
- switch (nvcfg1 & NVRAM_CFG1_5752PAGE_SIZE_MASK) {
- case FLASH_5752PAGE_SIZE_256:
+ tg3_nvram_get_pagesize(tp, nvcfg1);
+ if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
- tp->nvram_pagesize = 256;
+}
+
+
+static void __devinit tg3_get_5717_nvram_info(struct tg3 *tp)
+{
+ u32 nvcfg1;
+
+ nvcfg1 = tr32(NVRAM_CFG1);
+
+ switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
+ case FLASH_5717VENDOR_ATMEL_EEPROM:
+ case FLASH_5717VENDOR_MICRO_EEPROM:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
+
+ nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
+ tw32(NVRAM_CFG1, nvcfg1);
+ return;
+ case FLASH_5717VENDOR_ATMEL_MDB011D:
+ case FLASH_5717VENDOR_ATMEL_ADB011B:
+ case FLASH_5717VENDOR_ATMEL_ADB011D:
+ case FLASH_5717VENDOR_ATMEL_MDB021D:
+ case FLASH_5717VENDOR_ATMEL_ADB021B:
+ case FLASH_5717VENDOR_ATMEL_ADB021D:
+ case FLASH_5717VENDOR_ATMEL_45USPT:
+ tp->nvram_jedecnum = JEDEC_ATMEL;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+
+ switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
+ case FLASH_5717VENDOR_ATMEL_MDB021D:
+ case FLASH_5717VENDOR_ATMEL_ADB021B:
+ case FLASH_5717VENDOR_ATMEL_ADB021D:
+ tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+ break;
+ default:
+ tp->nvram_size = TG3_NVRAM_SIZE_128KB;
+ break;
+ }
break;
- case FLASH_5752PAGE_SIZE_512:
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
- tp->nvram_pagesize = 512;
+ case FLASH_5717VENDOR_ST_M_M25PE10:
+ case FLASH_5717VENDOR_ST_A_M25PE10:
+ case FLASH_5717VENDOR_ST_M_M45PE10:
+ case FLASH_5717VENDOR_ST_A_M45PE10:
+ case FLASH_5717VENDOR_ST_M_M25PE20:
+ case FLASH_5717VENDOR_ST_A_M25PE20:
+ case FLASH_5717VENDOR_ST_M_M45PE20:
+ case FLASH_5717VENDOR_ST_A_M45PE20:
+ case FLASH_5717VENDOR_ST_25USPT:
+ case FLASH_5717VENDOR_ST_45USPT:
+ tp->nvram_jedecnum = JEDEC_ST;
+ tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
+ tp->tg3_flags2 |= TG3_FLG2_FLASH;
+
+ switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
+ case FLASH_5717VENDOR_ST_M_M25PE20:
+ case FLASH_5717VENDOR_ST_A_M25PE20:
+ case FLASH_5717VENDOR_ST_M_M45PE20:
+ case FLASH_5717VENDOR_ST_A_M45PE20:
+ tp->nvram_size = TG3_NVRAM_SIZE_256KB;
+ break;
+ default:
+ tp->nvram_size = TG3_NVRAM_SIZE_128KB;
+ break;
+ }
break;
- case FLASH_5752PAGE_SIZE_1K:
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
- tp->nvram_pagesize = 1024;
- break;
- case FLASH_5752PAGE_SIZE_2K:
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
- tp->nvram_pagesize = 2048;
- break;
- case FLASH_5752PAGE_SIZE_4K:
- tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
- tp->nvram_pagesize = 4096;
- break;
- case FLASH_5752PAGE_SIZE_264:
- tp->nvram_pagesize = 264;
- break;
- case FLASH_5752PAGE_SIZE_528:
- tp->nvram_pagesize = 528;
- break;
+ default:
+ tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
+ return;
}
+
+ tg3_nvram_get_pagesize(tp, nvcfg1);
+ if (tp->nvram_pagesize != 264 && tp->nvram_pagesize != 528)
+ tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
}
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
@@ -10658,6 +11298,8 @@
tg3_get_5906_nvram_info(tp);
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
tg3_get_57780_nvram_info(tp);
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ tg3_get_5717_nvram_info(tp);
else
tg3_get_nvram_info(tp);
@@ -11485,6 +12127,9 @@
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790)
strcpy(tp->board_part_number, "BCM57790");
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
+ tp->pdev->device == TG3PCI_DEVICE_TIGON3_57788)
+ strcpy(tp->board_part_number, "BCM57788");
else
strcpy(tp->board_part_number, "none");
}
@@ -11768,8 +12413,17 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_USE_PROD_ID_REG) {
u32 prod_id_asic_rev;
- pci_read_config_dword(tp->pdev, TG3PCI_PRODID_ASICREV,
- &prod_id_asic_rev);
+ if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717C ||
+ tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717S ||
+ tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718C ||
+ tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718S)
+ pci_read_config_dword(tp->pdev,
+ TG3PCI_GEN2_PRODID_ASICREV,
+ &prod_id_asic_rev);
+ else
+ pci_read_config_dword(tp->pdev, TG3PCI_PRODID_ASICREV,
+ &prod_id_asic_rev);
+
tp->pci_chip_rev_id = prod_id_asic_rev;
}
@@ -11907,8 +12561,9 @@
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
tp->misc_host_ctrl);
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
tp->pdev_peer = tg3_find_peer(tp);
/* Intentionally exclude ASIC_REV_5906 */
@@ -11917,7 +12572,8 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
tp->tg3_flags3 |= TG3_FLG3_5755_PLUS;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
@@ -11965,9 +12621,19 @@
}
}
+ tp->irq_max = 1;
+
+#ifdef TG3_NAPI
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ tp->tg3_flags |= TG3_FLAG_SUPPORT_MSIX;
+ tp->irq_max = TG3_IRQ_MAX_VECS;
+ }
+#endif
+
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
- (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
- tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+ tp->tg3_flags |= TG3_FLAG_JUMBO_CAPABLE;
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
&pci_state_reg);
@@ -12100,7 +12766,6 @@
tp->write32 = tg3_write_flush_reg32;
}
-
if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
@@ -12159,7 +12824,8 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
@@ -12216,12 +12882,15 @@
tp->tg3_flags |= TG3_FLAG_WOL_SPEED_100MB;
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+ tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
+
/* A few boards don't want Ethernet@WireSpeed phy feature */
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) ||
+ (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) ||
(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
@@ -12232,9 +12901,10 @@
tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906 &&
+ !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780) {
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
@@ -12269,6 +12939,11 @@
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
+ if ((tp->pci_chip_rev_id == CHIPREV_ID_57780_A1 &&
+ tr32(RCVLPC_STATS_ENABLE) & RCVLPC_STATSENAB_ASF_FIX) ||
+ tp->pci_chip_rev_id == CHIPREV_ID_57780_A0)
+ tp->tg3_flags3 |= TG3_FLG3_TOGGLE_10_100_L1PLLPD;
+
err = tg3_mdio_init(tp);
if (err)
return err;
@@ -12352,7 +13027,7 @@
tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F ||
tp->pdev->device == PCI_DEVICE_ID_TIGON3_5787F)) ||
tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+ (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET))
tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
err = tg3_phy_probe(tp);
@@ -12471,8 +13146,10 @@
tw32_f(NVRAM_CMD, NVRAM_CMD_RESET);
else
tg3_nvram_unlock(tp);
- }
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+ if (tr32(TG3_CPMU_STATUS) & TG3_CPMU_STATUS_PCIE_FUNC)
+ mac_offset = 0xcc;
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
mac_offset = 0x10;
/* First try to get it from MAC address mailbox. */
@@ -12953,7 +13630,8 @@
static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
{
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
tp->bufmgr_config.mbuf_read_dma_low_water =
DEFAULT_MB_RDMA_LOW_WATER_5705;
tp->bufmgr_config.mbuf_mac_rx_low_water =
@@ -13158,7 +13836,8 @@
static int tg3_version_printed = 0;
struct net_device *dev;
struct tg3 *tp;
- int err, pm_cap;
+ int i, err, pm_cap;
+ u32 sndmbx, rcvmbx, intmbx;
char str[40];
u64 dma_mask, persist_dma_mask;
@@ -13190,7 +13869,7 @@
goto err_out_free_res;
}
- dev = alloc_etherdev(sizeof(*tp));
+ dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS);
if (!dev) {
printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
err = -ENOMEM;
@@ -13252,9 +13931,52 @@
tp->rx_pending = TG3_DEF_RX_RING_PENDING;
tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
- tp->tx_pending = TG3_DEF_TX_RING_PENDING;
- netif_napi_add(dev, &tp->napi, tg3_poll, 64);
+ intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
+ rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
+ sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
+ for (i = 0; i < TG3_IRQ_MAX_VECS; i++) {
+ struct tg3_napi *tnapi = &tp->napi[i];
+
+ tnapi->tp = tp;
+ tnapi->tx_pending = TG3_DEF_TX_RING_PENDING;
+
+ tnapi->int_mbox = intmbx;
+ if (i < 4)
+ intmbx += 0x8;
+ else
+ intmbx += 0x4;
+
+ tnapi->consmbox = rcvmbx;
+ tnapi->prodmbox = sndmbx;
+
+ if (i)
+ tnapi->coal_now = HOSTCC_MODE_COAL_VEC1_NOW << (i - 1);
+ else
+ tnapi->coal_now = HOSTCC_MODE_NOW;
+
+ if (!(tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX))
+ break;
+
+ /*
+ * If we support MSIX, we'll be using RSS. If we're using
+ * RSS, the first vector only handles link interrupts and the
+ * remaining vectors handle rx and tx interrupts. Reuse the
+ * mailbox values for the next iteration. The values we setup
+ * above are still useful for the single vectored mode.
+ */
+ if (!i)
+ continue;
+
+ rcvmbx += 0x8;
+
+ if (sndmbx & 0x4)
+ sndmbx -= 0x4;
+ else
+ sndmbx += 0xc;
+ }
+
+ netif_napi_add(dev, &tp->napi[0].napi, tg3_poll, 64);
dev->ethtool_ops = &tg3_ethtool_ops;
dev->watchdog_timeo = TG3_TX_TIMEOUT;
dev->irq = pdev->irq;
@@ -13348,7 +14070,8 @@
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
dev->features |= NETIF_F_TSO_ECN;
}
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index b3347c4..82b45d8 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -43,7 +43,13 @@
#define TG3PCI_DEVICE_TIGON3_57780 0x1692
#define TG3PCI_DEVICE_TIGON3_57760 0x1690
#define TG3PCI_DEVICE_TIGON3_57790 0x1694
-#define TG3PCI_DEVICE_TIGON3_57720 0x168c
+#define TG3PCI_DEVICE_TIGON3_57788 0x1691
+#define TG3PCI_DEVICE_TIGON3_5785_G 0x1699 /* GPHY */
+#define TG3PCI_DEVICE_TIGON3_5785_F 0x16a0 /* 10/100 only */
+#define TG3PCI_DEVICE_TIGON3_5717C 0x1655
+#define TG3PCI_DEVICE_TIGON3_5717S 0x1656
+#define TG3PCI_DEVICE_TIGON3_5718C 0x1665
+#define TG3PCI_DEVICE_TIGON3_5718S 0x1666
/* 0x04 --> 0x64 unused */
#define TG3PCI_MSI_DATA 0x00000064
/* 0x66 --> 0x68 unused */
@@ -115,6 +121,7 @@
#define ASIC_REV_5761 0x5761
#define ASIC_REV_5785 0x5785
#define ASIC_REV_57780 0x57780
+#define ASIC_REV_5717 0x5717
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
@@ -201,22 +208,24 @@
#define TG3PCI_MEM_WIN_BASE_ADDR 0x0000007c
#define TG3PCI_REG_DATA 0x00000080
#define TG3PCI_MEM_WIN_DATA 0x00000084
-#define TG3PCI_MODE_CTRL 0x00000088
-#define TG3PCI_MISC_CFG 0x0000008c
#define TG3PCI_MISC_LOCAL_CTRL 0x00000090
/* 0x94 --> 0x98 unused */
#define TG3PCI_STD_RING_PROD_IDX 0x00000098 /* 64-bit */
#define TG3PCI_RCV_RET_RING_CON_IDX 0x000000a0 /* 64-bit */
-#define TG3PCI_SND_PROD_IDX 0x000000a8 /* 64-bit */
-/* 0xb0 --> 0xb8 unused */
+/* 0xa0 --> 0xb8 unused */
#define TG3PCI_DUAL_MAC_CTRL 0x000000b8
#define DUAL_MAC_CTRL_CH_MASK 0x00000003
#define DUAL_MAC_CTRL_ID 0x00000004
#define TG3PCI_PRODID_ASICREV 0x000000bc
#define PROD_ID_ASIC_REV_MASK 0x0fffffff
-/* 0xc0 --> 0x100 unused */
+/* 0xc0 --> 0xf4 unused */
-/* 0x100 --> 0x200 unused */
+#define TG3PCI_GEN2_PRODID_ASICREV 0x000000f4
+/* 0xf8 --> 0x200 unused */
+
+#define TG3_CORR_ERR_STAT 0x00000110
+#define TG3_CORR_ERR_STAT_CLEAR 0xffffffff
+/* 0x114 --> 0x200 unused */
/* Mailbox registers */
#define MAILBOX_INTERRUPT_0 0x00000200 /* 64-bit */
@@ -442,6 +451,12 @@
#define RX_MODE_PROMISC 0x00000100
#define RX_MODE_NO_CRC_CHECK 0x00000200
#define RX_MODE_KEEP_VLAN_TAG 0x00000400
+#define RX_MODE_RSS_IPV4_HASH_EN 0x00010000
+#define RX_MODE_RSS_TCP_IPV4_HASH_EN 0x00020000
+#define RX_MODE_RSS_IPV6_HASH_EN 0x00040000
+#define RX_MODE_RSS_TCP_IPV6_HASH_EN 0x00080000
+#define RX_MODE_RSS_ITBL_HASH_BITS_7 0x00700000
+#define RX_MODE_RSS_ENABLE 0x00800000
#define RX_MODE_IPV6_CSUM_ENABLE 0x01000000
#define MAC_RX_STATUS 0x0000046c
#define RX_STATUS_REMOTE_TX_XOFFED 0x00000001
@@ -522,6 +537,10 @@
/* 0x598 --> 0x5a0 unused */
#define MAC_PHYCFG1 0x000005a0
#define MAC_PHYCFG1_RGMII_INT 0x00000001
+#define MAC_PHYCFG1_RXCLK_TO_MASK 0x00001ff0
+#define MAC_PHYCFG1_RXCLK_TIMEOUT 0x00001000
+#define MAC_PHYCFG1_TXCLK_TO_MASK 0x01ff0000
+#define MAC_PHYCFG1_TXCLK_TIMEOUT 0x01000000
#define MAC_PHYCFG1_RGMII_EXT_RX_DEC 0x02000000
#define MAC_PHYCFG1_RGMII_SND_STAT_EN 0x04000000
#define MAC_PHYCFG1_TXC_DRV 0x20000000
@@ -675,6 +694,7 @@
#define SG_DIG_PARTNER_FULL_DUPLEX 0x00020000 /* If !MRADV_CRC16_SELECT */
#define SG_DIG_PARTNER_NEXT_PAGE 0x00010000 /* If !MRADV_CRC16_SELECT */
#define SG_DIG_AUTONEG_STATE_MASK 0x00000ff0
+#define SG_DIG_IS_SERDES 0x00000100
#define SG_DIG_COMMA_DETECTOR 0x00000008
#define SG_DIG_MAC_ACK_STATUS 0x00000004
#define SG_DIG_AUTONEG_COMPLETE 0x00000002
@@ -682,7 +702,22 @@
/* 0x5b8 --> 0x600 unused */
#define MAC_TX_MAC_STATE_BASE 0x00000600 /* 16 bytes */
#define MAC_RX_MAC_STATE_BASE 0x00000610 /* 20 bytes */
-/* 0x624 --> 0x800 unused */
+/* 0x624 --> 0x670 unused */
+
+#define MAC_RSS_INDIR_TBL_0 0x00000630
+
+#define MAC_RSS_HASH_KEY_0 0x00000670
+#define MAC_RSS_HASH_KEY_1 0x00000674
+#define MAC_RSS_HASH_KEY_2 0x00000678
+#define MAC_RSS_HASH_KEY_3 0x0000067c
+#define MAC_RSS_HASH_KEY_4 0x00000680
+#define MAC_RSS_HASH_KEY_5 0x00000684
+#define MAC_RSS_HASH_KEY_6 0x00000688
+#define MAC_RSS_HASH_KEY_7 0x0000068c
+#define MAC_RSS_HASH_KEY_8 0x00000690
+#define MAC_RSS_HASH_KEY_9 0x00000694
+/* 0x698 --> 0x800 unused */
+
#define MAC_TX_STATS_OCTETS 0x00000800
#define MAC_TX_STATS_RESV1 0x00000804
#define MAC_TX_STATS_COLLISIONS 0x00000808
@@ -814,6 +849,7 @@
#define SNDBDI_MODE_RESET 0x00000001
#define SNDBDI_MODE_ENABLE 0x00000002
#define SNDBDI_MODE_ATTN_ENABLE 0x00000004
+#define SNDBDI_MODE_MULTI_TXQ_EN 0x00000020
#define SNDBDI_STATUS 0x00001804
#define SNDBDI_STATUS_ERROR_ATTN 0x00000004
#define SNDBDI_IN_PROD_IDX_0 0x00001808
@@ -864,6 +900,7 @@
#define RCVLPC_STATSCTRL_ENABLE 0x00000001
#define RCVLPC_STATSCTRL_FASTUPD 0x00000002
#define RCVLPC_STATS_ENABLE 0x00002018
+#define RCVLPC_STATSENAB_ASF_FIX 0x00000002
#define RCVLPC_STATSENAB_DACK_FIX 0x00040000
#define RCVLPC_STATSENAB_LNGBRST_RFIX 0x00400000
#define RCVLPC_STATS_INCMASK 0x0000201c
@@ -941,7 +978,11 @@
#define RCVBDI_MINI_THRESH 0x00002c14
#define RCVBDI_STD_THRESH 0x00002c18
#define RCVBDI_JUMBO_THRESH 0x00002c1c
-/* 0x2c20 --> 0x3000 unused */
+/* 0x2c20 --> 0x2d00 unused */
+
+#define STD_REPLENISH_LWM 0x00002d00
+#define JMB_REPLENISH_LWM 0x00002d04
+/* 0x2d08 --> 0x3000 unused */
/* Receive BD Completion Control Registers */
#define RCVCC_MODE 0x00003000
@@ -987,8 +1028,10 @@
#define TG3_CPMU_HST_ACC 0x0000361c
#define CPMU_HST_ACC_MACCLK_MASK 0x001f0000
#define CPMU_HST_ACC_MACCLK_6_25 0x00130000
-/* 0x3620 --> 0x3630 unused */
+/* 0x3620 --> 0x362c unused */
+#define TG3_CPMU_STATUS 0x0000362c
+#define TG3_CPMU_STATUS_PCIE_FUNC 0x20000000
#define TG3_CPMU_CLCK_STAT 0x00003630
#define CPMU_CLCK_STAT_MAC_CLCK_MASK 0x001f0000
#define CPMU_CLCK_STAT_MAC_CLCK_62_5 0x00000000
@@ -1022,6 +1065,7 @@
#define HOSTCC_MODE_CLRTICK_TXBD 0x00000400
#define HOSTCC_MODE_NOINT_ON_NOW 0x00000800
#define HOSTCC_MODE_NOINT_ON_FORCE 0x00001000
+#define HOSTCC_MODE_COAL_VEC1_NOW 0x00002000
#define HOSTCC_STATUS 0x00003c04
#define HOSTCC_STATUS_ERROR_ATTN 0x00000004
#define HOSTCC_RXCOL_TICKS 0x00003c08
@@ -1107,7 +1151,16 @@
#define HOSTCC_SND_CON_IDX_13 0x00003cf4
#define HOSTCC_SND_CON_IDX_14 0x00003cf8
#define HOSTCC_SND_CON_IDX_15 0x00003cfc
-/* 0x3d00 --> 0x4000 unused */
+#define HOSTCC_STATBLCK_RING1 0x00003d00
+/* 0x3d00 --> 0x3d80 unused */
+
+#define HOSTCC_RXCOL_TICKS_VEC1 0x00003d80
+#define HOSTCC_TXCOL_TICKS_VEC1 0x00003d84
+#define HOSTCC_RXMAX_FRAMES_VEC1 0x00003d88
+#define HOSTCC_TXMAX_FRAMES_VEC1 0x00003d8c
+#define HOSTCC_RXCOAL_MAXF_INT_VEC1 0x00003d90
+#define HOSTCC_TXCOAL_MAXF_INT_VEC1 0x00003d94
+/* 0x3d98 --> 0x4000 unused */
/* Memory arbiter control registers */
#define MEMARB_MODE 0x00004000
@@ -1445,6 +1498,8 @@
#define MSGINT_MODE 0x00006000
#define MSGINT_MODE_RESET 0x00000001
#define MSGINT_MODE_ENABLE 0x00000002
+#define MSGINT_MODE_ONE_SHOT_DISABLE 0x00000020
+#define MSGINT_MODE_MULTIVEC_EN 0x00000080
#define MSGINT_STATUS 0x00006004
#define MSGINT_FIFO 0x00006008
/* 0x600c --> 0x6400 unused */
@@ -1640,6 +1695,25 @@
#define FLASH_57780VENDOR_ATMEL_AT45DB021B 0x03400002
#define FLASH_57780VENDOR_ATMEL_AT45DB041D 0x00400001
#define FLASH_57780VENDOR_ATMEL_AT45DB041B 0x03400001
+#define FLASH_5717VENDOR_ATMEL_EEPROM 0x02000001
+#define FLASH_5717VENDOR_MICRO_EEPROM 0x02000003
+#define FLASH_5717VENDOR_ATMEL_MDB011D 0x01000001
+#define FLASH_5717VENDOR_ATMEL_MDB021D 0x01000003
+#define FLASH_5717VENDOR_ST_M_M25PE10 0x02000000
+#define FLASH_5717VENDOR_ST_M_M25PE20 0x02000002
+#define FLASH_5717VENDOR_ST_M_M45PE10 0x00000001
+#define FLASH_5717VENDOR_ST_M_M45PE20 0x00000003
+#define FLASH_5717VENDOR_ATMEL_ADB011B 0x01400000
+#define FLASH_5717VENDOR_ATMEL_ADB021B 0x01400002
+#define FLASH_5717VENDOR_ATMEL_ADB011D 0x01400001
+#define FLASH_5717VENDOR_ATMEL_ADB021D 0x01400003
+#define FLASH_5717VENDOR_ST_A_M25PE10 0x02400000
+#define FLASH_5717VENDOR_ST_A_M25PE20 0x02400002
+#define FLASH_5717VENDOR_ST_A_M45PE10 0x02400001
+#define FLASH_5717VENDOR_ST_A_M45PE20 0x02400003
+#define FLASH_5717VENDOR_ATMEL_45USPT 0x03400000
+#define FLASH_5717VENDOR_ST_25USPT 0x03400002
+#define FLASH_5717VENDOR_ST_45USPT 0x03400001
#define NVRAM_CFG1_5752PAGE_SIZE_MASK 0x70000000
#define FLASH_5752PAGE_SIZE_256 0x00000000
#define FLASH_5752PAGE_SIZE_512 0x10000000
@@ -1696,11 +1770,23 @@
#define PCIE_TRANSACTION_CFG 0x00007c04
#define PCIE_TRANS_CFG_1SHOT_MSI 0x20000000
#define PCIE_TRANS_CFG_LOM 0x00000020
+/* 0x7c08 --> 0x7d28 unused */
#define PCIE_PWR_MGMT_THRESH 0x00007d28
#define PCIE_PWR_MGMT_L1_THRESH_MSK 0x0000ff00
#define PCIE_PWR_MGMT_L1_THRESH_4MS 0x0000ff00
#define PCIE_PWR_MGMT_EXT_ASPM_TMR_EN 0x01000000
+/* 0x7d2c --> 0x7d54 unused */
+
+#define TG3_PCIE_LNKCTL 0x00007d54
+#define TG3_PCIE_LNKCTL_L1_PLL_PD_EN 0x00000008
+#define TG3_PCIE_LNKCTL_L1_PLL_PD_DIS 0x00000080
+/* 0x7d58 --> 0x7e70 unused */
+
+#define TG3_PCIE_EIDLE_DELAY 0x00007e70
+#define TG3_PCIE_EIDLE_DELAY_MASK 0x0000001f
+#define TG3_PCIE_EIDLE_DELAY_13_CLKS 0x0000000c
+/* 0x7e74 --> 0x8000 unused */
/* OTP bit definitions */
@@ -1890,7 +1976,6 @@
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
-#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */
#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
#define MII_TG3_DSP_TAP1 0x0001
@@ -1957,17 +2042,23 @@
#define MII_TG3_MISC_SHDW_SCR5_LPED 0x0010
#define MII_TG3_MISC_SHDW_SCR5_SEL 0x1400
-
-#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
-#define MII_TG3_EPHY_SHADOW_EN 0x80
-
-#define MII_TG3_EPHYTST_MISCCTRL 0x10 /* 5906 EPHY misc ctrl shadow register */
-#define MII_TG3_EPHYTST_MISCCTRL_MDIX 0x4000
-
#define MII_TG3_TEST1 0x1e
#define MII_TG3_TEST1_TRIM_EN 0x0010
#define MII_TG3_TEST1_CRC_EN 0x8000
+
+/* Fast Ethernet Tranceiver definitions */
+#define MII_TG3_FET_PTEST 0x17
+#define MII_TG3_FET_TEST 0x1f
+#define MII_TG3_FET_SHADOW_EN 0x0080
+
+#define MII_TG3_FET_SHDW_MISCCTRL 0x10
+#define MII_TG3_FET_SHDW_MISCCTRL_MDIX 0x4000
+
+#define MII_TG3_FET_SHDW_AUXSTAT2 0x1b
+#define MII_TG3_FET_SHDW_AUXSTAT2_APD 0x0020
+
+
/* APE registers. Accessible through BAR1 */
#define TG3_APE_EVENT 0x000c
#define APE_EVENT_1 0x00000001
@@ -2065,6 +2156,7 @@
#define TXD_FLAG_IP_CSUM 0x0002
#define TXD_FLAG_END 0x0004
#define TXD_FLAG_IP_FRAG 0x0008
+#define TXD_FLAG_JMB_PKT 0x0008
#define TXD_FLAG_IP_FRAG_END 0x0010
#define TXD_FLAG_VLAN 0x0040
#define TXD_FLAG_COAL_NOW 0x0080
@@ -2450,6 +2542,49 @@
u64 nic_tx_threshold_hit;
};
+struct tg3_rx_prodring_set {
+ u32 rx_std_ptr;
+ u32 rx_jmb_ptr;
+ struct tg3_rx_buffer_desc *rx_std;
+ struct tg3_ext_rx_buffer_desc *rx_jmb;
+ struct ring_info *rx_std_buffers;
+ struct ring_info *rx_jmb_buffers;
+ dma_addr_t rx_std_mapping;
+ dma_addr_t rx_jmb_mapping;
+};
+
+#define TG3_IRQ_MAX_VECS 5
+
+struct tg3_napi {
+ struct napi_struct napi ____cacheline_aligned;
+ struct tg3 *tp;
+ struct tg3_hw_status *hw_status;
+
+ u32 last_tag;
+ u32 last_irq_tag;
+ u32 int_mbox;
+ u32 coal_now;
+ u32 tx_prod;
+ u32 tx_cons;
+ u32 tx_pending;
+ u32 prodmbox;
+
+ u32 consmbox;
+ u32 rx_rcb_ptr;
+ u16 *rx_rcb_prod_idx;
+
+ struct tg3_rx_buffer_desc *rx_rcb;
+ struct tg3_tx_buffer_desc *tx_ring;
+ struct tx_ring_info *tx_buffers;
+
+ dma_addr_t status_mapping;
+ dma_addr_t rx_rcb_mapping;
+ dma_addr_t tx_desc_mapping;
+
+ char irq_lbl[IFNAMSIZ];
+ unsigned int irq_vec;
+};
+
struct tg3 {
/* begin "general, frequently-used members" cacheline section */
@@ -2502,50 +2637,26 @@
struct net_device *dev;
struct pci_dev *pdev;
- struct tg3_hw_status *hw_status;
- dma_addr_t status_mapping;
- u32 last_tag;
- u32 last_irq_tag;
-
u32 msg_enable;
/* begin "tx thread" cacheline section */
void (*write32_tx_mbox) (struct tg3 *, u32,
u32);
- u32 tx_prod;
- u32 tx_cons;
- u32 tx_pending;
-
- struct tg3_tx_buffer_desc *tx_ring;
- struct tx_ring_info *tx_buffers;
- dma_addr_t tx_desc_mapping;
/* begin "rx thread" cacheline section */
- struct napi_struct napi;
+ struct tg3_napi napi[TG3_IRQ_MAX_VECS];
void (*write32_rx_mbox) (struct tg3 *, u32,
u32);
- u32 rx_rcb_ptr;
- u32 rx_std_ptr;
- u32 rx_jumbo_ptr;
u32 rx_pending;
u32 rx_jumbo_pending;
+ u32 rx_std_max_post;
+ u32 rx_pkt_map_sz;
#if TG3_VLAN_TAG_USED
struct vlan_group *vlgrp;
#endif
- struct tg3_rx_buffer_desc *rx_std;
- struct ring_info *rx_std_buffers;
- dma_addr_t rx_std_mapping;
- u32 rx_std_max_post;
+ struct tg3_rx_prodring_set prodring[1];
- struct tg3_rx_buffer_desc *rx_jumbo;
- struct ring_info *rx_jumbo_buffers;
- dma_addr_t rx_jumbo_mapping;
-
- struct tg3_rx_buffer_desc *rx_rcb;
- dma_addr_t rx_rcb_mapping;
-
- u32 rx_pkt_buf_sz;
/* begin "everything else" cacheline(s) section */
struct net_device_stats net_stats;
@@ -2575,6 +2686,10 @@
#define TG3_FLAG_EEPROM_WRITE_PROT 0x00001000
#define TG3_FLAG_NVRAM 0x00002000
#define TG3_FLAG_NVRAM_BUFFERED 0x00004000
+#define TG3_FLAG_SUPPORT_MSI 0x00008000
+#define TG3_FLAG_SUPPORT_MSIX 0x00010000
+#define TG3_FLAG_SUPPORT_MSI_OR_MSIX (TG3_FLAG_SUPPORT_MSI | \
+ TG3_FLAG_SUPPORT_MSIX)
#define TG3_FLAG_PCIX_MODE 0x00020000
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
@@ -2587,7 +2702,7 @@
#define TG3_FLAG_CPMU_PRESENT 0x04000000
#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
-#define TG3_FLAG_SUPPORT_MSI 0x20000000
+#define TG3_FLAG_JUMBO_CAPABLE 0x20000000
#define TG3_FLAG_CHIP_RESETTING 0x40000000
#define TG3_FLAG_INIT_COMPLETE 0x80000000
u32 tg3_flags2;
@@ -2613,7 +2728,9 @@
#define TG3_FLG2_5750_PLUS 0x00080000
#define TG3_FLG2_PROTECTED_NVRAM 0x00100000
#define TG3_FLG2_USING_MSI 0x00200000
-#define TG3_FLG2_JUMBO_CAPABLE 0x00400000
+#define TG3_FLG2_USING_MSIX 0x00400000
+#define TG3_FLG2_USING_MSI_OR_MSIX (TG3_FLG2_USING_MSI | \
+ TG3_FLG2_USING_MSIX)
#define TG3_FLG2_MII_SERDES 0x00800000
#define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \
TG3_FLG2_MII_SERDES)
@@ -2641,6 +2758,9 @@
#define TG3_FLG3_PHY_ENABLE_APD 0x00001000
#define TG3_FLG3_5755_PLUS 0x00002000
#define TG3_FLG3_NO_NVRAM 0x00004000
+#define TG3_FLG3_TOGGLE_10_100_L1PLLPD 0x00008000
+#define TG3_FLG3_PHY_IS_FET 0x00010000
+#define TG3_FLG3_ENABLE_RSS 0x00020000
struct timer_list timer;
u16 timer_counter;
@@ -2686,6 +2806,8 @@
struct mii_bus *mdio_bus;
int mdio_irq[PHY_MAX_ADDR];
+ u8 phy_addr;
+
/* PHY info */
u32 phy_id;
#define PHY_ID_MASK 0xfffffff0
@@ -2785,6 +2907,9 @@
#define SST_25VF0X0_PAGE_SIZE 4098
+ unsigned int irq_max;
+ unsigned int irq_cnt;
+
struct ethtool_coalesce coal;
/* firmware info */
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 384cb5e..3d31b47 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -289,7 +289,7 @@
static void TLan_Eisa_Cleanup( void );
static int TLan_Init( struct net_device * );
static int TLan_Open( struct net_device *dev );
-static int TLan_StartTx( struct sk_buff *, struct net_device *);
+static netdev_tx_t TLan_StartTx( struct sk_buff *, struct net_device *);
static irqreturn_t TLan_HandleInterrupt( int, void *);
static int TLan_Close( struct net_device *);
static struct net_device_stats *TLan_GetStats( struct net_device *);
@@ -1004,8 +1004,6 @@
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
TLan_MiiWriteReg(dev, data->phy_id & 0x1f,
data->reg_num & 0x1f, data->val_in);
return 0;
@@ -1083,7 +1081,7 @@
*
**************************************************************/
-static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
+static netdev_tx_t TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
dma_addr_t tail_list_phys;
@@ -1095,11 +1093,11 @@
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
dev->name );
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
- return 0;
+ return NETDEV_TX_OK;
txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
tail_list = priv->txList + priv->txTail;
@@ -1150,7 +1148,7 @@
CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
} /* TLan_StartTx */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index b40b6de..7241589 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -128,7 +128,7 @@
static int xl_open(struct net_device *dev);
static int xl_open_hw(struct net_device *dev) ;
static int xl_hw_reset(struct net_device *dev);
-static int xl_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev);
static void xl_dn_comp(struct net_device *dev);
static int xl_close(struct net_device *dev);
static void xl_set_rx_mode(struct net_device *dev);
@@ -1193,7 +1193,7 @@
* Tx - Polling configuration
*/
-static int xl_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xl_private *xl_priv=netdev_priv(dev);
struct xl_tx_desc *txd ;
@@ -1240,7 +1240,7 @@
spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
- return 0;
+ return NETDEV_TX_OK;
} else {
spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ;
return NETDEV_TX_BUSY;
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 08a6c41..525bbc5 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -191,7 +191,8 @@
static void tok_open_adapter(unsigned long dev_addr);
static void open_sap(unsigned char type, struct net_device *dev);
static void tok_set_multicast_list(struct net_device *dev);
-static int tok_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t tok_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static int tok_close(struct net_device *dev);
static irqreturn_t tok_interrupt(int irq, void *dev_id);
static void initial_tok_int(struct net_device *dev);
@@ -1022,7 +1023,8 @@
#define STATION_ID_OFST 4
-static int tok_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t tok_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct tok_info *ti;
unsigned long flags;
@@ -1041,7 +1043,7 @@
writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD);
spin_unlock_irqrestore(&(ti->lock), flags);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/*****************************************************************************/
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index b3715ef..26dca2b 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -203,7 +203,8 @@
static int streamer_reset(struct net_device *dev);
static int streamer_open(struct net_device *dev);
-static int streamer_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t streamer_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int streamer_close(struct net_device *dev);
static void streamer_set_rx_mode(struct net_device *dev);
static irqreturn_t streamer_interrupt(int irq, void *dev_id);
@@ -1141,7 +1142,8 @@
return IRQ_HANDLED;
}
-static int streamer_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t streamer_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct streamer_private *streamer_priv =
netdev_priv(dev);
@@ -1183,7 +1185,7 @@
streamer_priv->tx_ring_free = (streamer_priv->tx_ring_free + 1) & (STREAMER_TX_RING_SIZE - 1);
spin_unlock_irqrestore(&streamer_priv->streamer_lock,flags);
- return 0;
+ return NETDEV_TX_OK;
} else {
netif_stop_queue(dev);
spin_unlock_irqrestore(&streamer_priv->streamer_lock,flags);
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 451b541..d9ec7f0 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -182,7 +182,8 @@
static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
static int olympic_init(struct net_device *dev);
static int olympic_open(struct net_device *dev);
-static int olympic_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t olympic_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int olympic_close(struct net_device *dev);
static void olympic_set_rx_mode(struct net_device *dev);
static void olympic_freemem(struct net_device *dev) ;
@@ -1030,7 +1031,8 @@
return IRQ_HANDLED;
}
-static int olympic_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t olympic_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct olympic_private *olympic_priv=netdev_priv(dev);
u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
@@ -1052,7 +1054,7 @@
writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1);
netif_wake_queue(dev);
spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
- return 0;
+ return NETDEV_TX_OK;
} else {
spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
return NETDEV_TX_BUSY;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 54ad4ed..ebda61bc4 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -234,7 +234,8 @@
/* S */
static int smctr_send_dat(struct net_device *dev);
-static int smctr_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t smctr_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static int smctr_send_lobe_media_test(struct net_device *dev);
static int smctr_send_rpt_addr(struct net_device *dev, MAC_HEADER *rmf,
__u16 correlator);
@@ -3091,11 +3092,7 @@
/* Setup the lobe media test. */
smctr_lobe_media_test_cmd(dev);
if(smctr_wait_cmd(dev))
- {
- smctr_reset_adapter(dev);
- tp->status = CLOSED;
- return (LOBE_MEDIA_TEST_FAILED);
- }
+ goto err;
/* Tx lobe media test frames. */
for(i = 0; i < 1500; ++i)
@@ -3103,20 +3100,12 @@
if(smctr_send_lobe_media_test(dev))
{
if(perror)
- {
- smctr_reset_adapter(dev);
- tp->state = CLOSED;
- return (LOBE_MEDIA_TEST_FAILED);
- }
+ goto err;
else
{
perror = 1;
if(smctr_lobe_media_test_cmd(dev))
- {
- smctr_reset_adapter(dev);
- tp->state = CLOSED;
- return (LOBE_MEDIA_TEST_FAILED);
- }
+ goto err;
}
}
}
@@ -3124,28 +3113,24 @@
if(smctr_send_dat(dev))
{
if(smctr_send_dat(dev))
- {
- smctr_reset_adapter(dev);
- tp->state = CLOSED;
- return (LOBE_MEDIA_TEST_FAILED);
- }
+ goto err;
}
/* Check if any frames received during test. */
if((tp->rx_fcb_curr[MAC_QUEUE]->frame_status)
|| (tp->rx_fcb_curr[NON_MAC_QUEUE]->frame_status))
- {
- smctr_reset_adapter(dev);
- tp->state = CLOSED;
- return (LOBE_MEDIA_TEST_FAILED);
- }
+ goto err;
/* Set receive mask to "Promisc" mode. */
tp->receive_mask = saved_rcv_mask;
smctr_chg_rx_mask(dev);
- return (0);
+ return 0;
+err:
+ smctr_reset_adapter(dev);
+ tp->status = CLOSED;
+ return LOBE_MEDIA_TEST_FAILED;
}
static int smctr_lobe_media_test_cmd(struct net_device *dev)
@@ -4587,7 +4572,8 @@
/*
* Gets skb from system, queues it and checks if it can be sent
*/
-static int smctr_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t smctr_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct net_local *tp = netdev_priv(dev);
@@ -4609,7 +4595,7 @@
if(tp->QueueSkb > 0)
netif_wake_queue(dev);
- return (0);
+ return NETDEV_TX_OK;
}
static int smctr_send_lobe_media_test(struct net_device *dev)
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index a2eab72..a7b6888 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -144,8 +144,8 @@
/* "G" */
static struct net_device_stats *tms380tr_get_stats(struct net_device *dev);
/* "H" */
-static int tms380tr_hardware_send_packet(struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
/* "I" */
static int tms380tr_init_adapter(struct net_device *dev);
static void tms380tr_init_ipb(struct net_local *tp);
@@ -165,7 +165,8 @@
static void tms380tr_reset_interrupt(struct net_device *dev);
static void tms380tr_ring_status_irq(struct net_device *dev);
/* "S" */
-static int tms380tr_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t tms380tr_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static void tms380tr_set_multicast_list(struct net_device *dev);
static int tms380tr_set_mac_address(struct net_device *dev, void *addr);
/* "T" */
@@ -599,21 +600,23 @@
/*
* Gets skb from system, queues it and checks if it can be sent
*/
-static int tms380tr_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t tms380tr_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct net_local *tp = netdev_priv(dev);
- int err;
+ netdev_tx_t rc;
- err = tms380tr_hardware_send_packet(skb, dev);
+ rc = tms380tr_hardware_send_packet(skb, dev);
if(tp->TplFree->NextTPLPtr->BusyFlag)
netif_stop_queue(dev);
- return (err);
+ return rc;
}
/*
* Move frames into adapter tx queue
*/
-static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
TPL *tpl;
short length;
@@ -682,7 +685,7 @@
tms380tr_exec_sifcmd(dev, CMD_TX_VALID);
spin_unlock_irqrestore(&tp->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index ef49744..74e5ba4 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -599,7 +599,8 @@
netif_wake_queue(de->dev);
}
-static int de_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t de_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
{
struct de_private *de = netdev_priv(dev);
unsigned int entry, tx_free;
@@ -651,7 +652,7 @@
dw32(TxPoll, NormalTxPoll);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* Set or clear the multicast filter for this adaptor.
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index acfdccd..a8349b7 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -895,7 +895,8 @@
** Public Functions
*/
static int de4x5_open(struct net_device *dev);
-static int de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
static int de4x5_close(struct net_device *dev);
static struct net_device_stats *de4x5_get_stats(struct net_device *dev);
@@ -1456,18 +1457,16 @@
/*
** Writes a socket buffer address to the next available transmit descriptor.
*/
-static int
+static netdev_tx_t
de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
- int status = NETDEV_TX_OK;
u_long flags = 0;
netif_stop_queue(dev);
- if (!lp->tx_enable) { /* Cannot send for now */
+ if (!lp->tx_enable) /* Cannot send for now */
return NETDEV_TX_LOCKED;
- }
/*
** Clean out the TX ring asynchronously to interrupts - sometimes the
@@ -1521,7 +1520,7 @@
lp->cache.lock = 0;
- return status;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 8e78f00..a45ded0 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -311,7 +311,7 @@
/* function declaration ------------------------------------- */
static int dmfe_open(struct DEVICE *);
-static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
static int dmfe_stop(struct DEVICE *);
static void dmfe_set_filter_mode(struct DEVICE *);
static const struct ethtool_ops netdev_ethtool_ops;
@@ -661,7 +661,8 @@
* Send a packet to media from the upper layer.
*/
-static int dmfe_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
+ struct DEVICE *dev)
{
struct dmfe_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
@@ -676,7 +677,7 @@
if (skb->len > MAX_PACKET_SIZE) {
printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&db->lock, flags);
@@ -722,7 +723,7 @@
/* free this SKB */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 4cf9a65..6b2330e 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -256,7 +256,8 @@
static void tulip_tx_timeout(struct net_device *dev);
static void tulip_init_ring(struct net_device *dev);
static void tulip_free_ring(struct net_device *dev);
-static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t tulip_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int tulip_open(struct net_device *dev);
static int tulip_close(struct net_device *dev);
static void tulip_up(struct net_device *dev);
@@ -645,7 +646,7 @@
tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
}
-static int
+static netdev_tx_t
tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
@@ -693,7 +694,7 @@
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void tulip_clean_tx_ring(struct tulip_private *tp)
@@ -922,8 +923,6 @@
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable (CAP_NET_ADMIN))
- return -EPERM;
if (regnum & ~0x1f)
return -EINVAL;
if (data->phy_id == phy) {
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 9277ce8..c457a0c 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -215,7 +215,8 @@
/* function declaration ------------------------------------- */
static int uli526x_open(struct net_device *);
-static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *,
+ struct net_device *);
static int uli526x_stop(struct net_device *);
static void uli526x_set_filter_mode(struct net_device *);
static const struct ethtool_ops netdev_ethtool_ops;
@@ -567,7 +568,8 @@
* Send a packet to media from the upper layer.
*/
-static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
@@ -582,7 +584,7 @@
if (skb->len > MAX_PACKET_SIZE) {
printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&db->lock, flags);
@@ -624,7 +626,7 @@
/* free this SKB */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 0f15773..b38d3b7 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -333,7 +333,7 @@
static void tx_timeout(struct net_device *dev);
static int alloc_ringdesc(struct net_device *dev);
static void free_ringdesc(struct netdev_private *np);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
static int netdev_rx(struct net_device *dev);
@@ -997,7 +997,7 @@
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
unsigned entry;
@@ -1058,7 +1058,7 @@
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
dev->name, np->cur_tx, entry);
}
- return 0;
+ return NETDEV_TX_OK;
}
static void netdev_tx_done(struct net_device *dev)
@@ -1470,8 +1470,6 @@
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
spin_lock_irq(&np->lock);
mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
spin_unlock_irq(&np->lock);
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index c2ca9f4..0f2ca598 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -113,7 +113,8 @@
static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id);
static void xircom_remove(struct pci_dev *pdev);
static irqreturn_t xircom_interrupt(int irq, void *dev_instance);
-static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int xircom_open(struct net_device *dev);
static int xircom_close(struct net_device *dev);
static void xircom_up(struct xircom_private *card);
@@ -384,7 +385,8 @@
return IRQ_HANDLED;
}
-static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct xircom_private *card;
unsigned long flags;
@@ -434,7 +436,7 @@
card->transmit_used = nextdescriptor;
leave("xircom-start_xmit - sent");
spin_unlock_irqrestore(&card->lock,flags);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 42b6c63..3f5d288 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -103,13 +103,10 @@
uid_t owner;
gid_t group;
- struct sk_buff_head readq;
-
struct net_device *dev;
struct fasync_struct *fasync;
struct tap_filter txflt;
- struct sock *sk;
struct socket socket;
#ifdef TUN_DEBUG
@@ -130,17 +127,10 @@
static int tun_attach(struct tun_struct *tun, struct file *file)
{
struct tun_file *tfile = file->private_data;
- const struct cred *cred = current_cred();
int err;
ASSERT_RTNL();
- /* Check permissions */
- if (((tun->owner != -1 && cred->euid != tun->owner) ||
- (tun->group != -1 && !in_egroup_p(tun->group))) &&
- !capable(CAP_NET_ADMIN))
- return -EPERM;
-
netif_tx_lock_bh(tun->dev);
err = -EINVAL;
@@ -155,7 +145,7 @@
tfile->tun = tun;
tun->tfile = tfile;
dev_hold(tun->dev);
- sock_hold(tun->sk);
+ sock_hold(tun->socket.sk);
atomic_inc(&tfile->count);
out:
@@ -171,7 +161,7 @@
netif_tx_unlock_bh(tun->dev);
/* Drop read queue */
- skb_queue_purge(&tun->readq);
+ skb_queue_purge(&tun->socket.sk->sk_receive_queue);
/* Drop the extra count on the net device */
dev_put(tun->dev);
@@ -340,7 +330,7 @@
{
struct tun_struct *tun = netdev_priv(dev);
- sock_put(tun->sk);
+ sock_put(tun->socket.sk);
}
/* Net device open. */
@@ -358,7 +348,7 @@
}
/* Net device start xmit */
-static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
@@ -374,7 +364,7 @@
if (!check_filter(&tun->txflt, skb))
goto drop;
- if (skb_queue_len(&tun->readq) >= dev->tx_queue_len) {
+ if (skb_queue_len(&tun->socket.sk->sk_receive_queue) >= dev->tx_queue_len) {
if (!(tun->flags & TUN_ONE_QUEUE)) {
/* Normal queueing mode. */
/* Packet scheduler handles dropping of further packets. */
@@ -391,19 +381,19 @@
}
/* Enqueue packet */
- skb_queue_tail(&tun->readq, skb);
+ skb_queue_tail(&tun->socket.sk->sk_receive_queue, skb);
dev->trans_start = jiffies;
/* Notify and wake up reader process */
if (tun->flags & TUN_FASYNC)
kill_fasync(&tun->fasync, SIGIO, POLL_IN);
wake_up_interruptible(&tun->socket.wait);
- return 0;
+ return NETDEV_TX_OK;
drop:
dev->stats.tx_dropped++;
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void tun_net_mclist(struct net_device *dev)
@@ -492,13 +482,13 @@
if (!tun)
return POLLERR;
- sk = tun->sk;
+ sk = tun->socket.sk;
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
poll_wait(file, &tun->socket.wait, wait);
- if (!skb_queue_empty(&tun->readq))
+ if (!skb_queue_empty(&sk->sk_receive_queue))
mask |= POLLIN | POLLRDNORM;
if (sock_writeable(sk) ||
@@ -519,7 +509,7 @@
size_t prepad, size_t len,
size_t linear, int noblock)
{
- struct sock *sk = tun->sk;
+ struct sock *sk = tun->socket.sk;
struct sk_buff *skb;
int err;
@@ -641,6 +631,9 @@
case VIRTIO_NET_HDR_GSO_TCPV6:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
break;
+ case VIRTIO_NET_HDR_GSO_UDP:
+ skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
+ break;
default:
tun->dev->stats.rx_frame_errors++;
kfree_skb(skb);
@@ -726,6 +719,8 @@
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (sinfo->gso_type & SKB_GSO_TCPV6)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
+ else if (sinfo->gso_type & SKB_GSO_UDP)
+ gso.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (sinfo->gso_type & SKB_GSO_TCP_ECN)
@@ -782,7 +777,7 @@
current->state = TASK_INTERRUPTIBLE;
/* Read frames from the queue */
- if (!(skb=skb_dequeue(&tun->readq))) {
+ if (!(skb=skb_dequeue(&tun->socket.sk->sk_receive_queue))) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
@@ -819,8 +814,6 @@
{
struct tun_struct *tun = netdev_priv(dev);
- skb_queue_head_init(&tun->readq);
-
tun->owner = -1;
tun->group = -1;
@@ -926,6 +919,8 @@
dev = __dev_get_by_name(net, ifr->ifr_name);
if (dev) {
+ const struct cred *cred = current_cred();
+
if (ifr->ifr_flags & IFF_TUN_EXCL)
return -EBUSY;
if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops)
@@ -935,6 +930,14 @@
else
return -EINVAL;
+ if (((tun->owner != -1 && cred->euid != tun->owner) ||
+ (tun->group != -1 && !in_egroup_p(tun->group))) &&
+ !capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = security_tun_dev_attach(tun->socket.sk);
+ if (err < 0)
+ return err;
+
err = tun_attach(tun, file);
if (err < 0)
return err;
@@ -947,6 +950,9 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ err = security_tun_dev_create();
+ if (err < 0)
+ return err;
/* Set dev type */
if (ifr->ifr_flags & IFF_TUN) {
@@ -986,9 +992,10 @@
sk->sk_write_space = tun_sock_write_space;
sk->sk_sndbuf = INT_MAX;
- tun->sk = sk;
container_of(sk, struct tun_sock, sk)->tun = tun;
+ security_tun_dev_post_create(sk);
+
tun_net_init(dev);
if (strchr(dev->name, '%')) {
@@ -997,7 +1004,6 @@
goto err_free_sk;
}
- err = -EINVAL;
err = register_netdevice(tun->dev);
if (err < 0)
goto err_free_sk;
@@ -1069,7 +1075,8 @@
old_features = dev->features;
/* Unset features, set them as we chew on the arg. */
features = (old_features & ~(NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST
- |NETIF_F_TSO_ECN|NETIF_F_TSO|NETIF_F_TSO6));
+ |NETIF_F_TSO_ECN|NETIF_F_TSO|NETIF_F_TSO6
+ |NETIF_F_UFO));
if (arg & TUN_F_CSUM) {
features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
@@ -1086,6 +1093,11 @@
features |= NETIF_F_TSO6;
arg &= ~(TUN_F_TSO4|TUN_F_TSO6);
}
+
+ if (arg & TUN_F_UFO) {
+ features |= NETIF_F_UFO;
+ arg &= ~TUN_F_UFO;
+ }
}
/* This gives the user a way to test for new features in future by
@@ -1239,7 +1251,7 @@
break;
case TUNGETSNDBUF:
- sndbuf = tun->sk->sk_sndbuf;
+ sndbuf = tun->socket.sk->sk_sndbuf;
if (copy_to_user(argp, &sndbuf, sizeof(sndbuf)))
ret = -EFAULT;
break;
@@ -1250,7 +1262,7 @@
break;
}
- tun->sk->sk_sndbuf = sndbuf;
+ tun->socket.sk->sk_sndbuf = sndbuf;
break;
default:
@@ -1333,7 +1345,7 @@
tun = tfile->tun;
if (tun)
- sock_put(tun->sk);
+ sock_put(tun->socket.sk);
put_net(tfile->net);
kfree(tfile);
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index cf25eb4..d6d3452 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -762,7 +762,7 @@
tcpd->status = 0;
}
-static int
+static netdev_tx_t
typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct typhoon *tp = netdev_priv(dev);
@@ -909,7 +909,7 @@
netif_wake_queue(dev);
}
- return 0;
+ return NETDEV_TX_OK;
}
static void
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 8a7b8c7..4469f24 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -209,9 +209,10 @@
{
struct sk_buff *skb = NULL;
- skb = dev_alloc_skb(ugeth->ug_info->uf_info.max_rx_buf_length +
- UCC_GETH_RX_DATA_BUF_ALIGNMENT);
-
+ skb = __skb_dequeue(&ugeth->rx_recycle);
+ if (!skb)
+ skb = dev_alloc_skb(ugeth->ug_info->uf_info.max_rx_buf_length +
+ UCC_GETH_RX_DATA_BUF_ALIGNMENT);
if (skb == NULL)
return NULL;
@@ -437,38 +438,6 @@
QE_CR_PROTOCOL_ETHERNET, 0);
}
-#ifdef CONFIG_UGETH_MAGIC_PACKET
-static void magic_packet_detection_enable(struct ucc_geth_private *ugeth)
-{
- struct ucc_fast_private *uccf;
- struct ucc_geth __iomem *ug_regs;
-
- uccf = ugeth->uccf;
- ug_regs = ugeth->ug_regs;
-
- /* Enable interrupts for magic packet detection */
- setbits32(uccf->p_uccm, UCC_GETH_UCCE_MPD);
-
- /* Enable magic packet detection */
- setbits32(&ug_regs->maccfg2, MACCFG2_MPE);
-}
-
-static void magic_packet_detection_disable(struct ucc_geth_private *ugeth)
-{
- struct ucc_fast_private *uccf;
- struct ucc_geth __iomem *ug_regs;
-
- uccf = ugeth->uccf;
- ug_regs = ugeth->ug_regs;
-
- /* Disable interrupts for magic packet detection */
- clrbits32(uccf->p_uccm, UCC_GETH_UCCE_MPD);
-
- /* Disable magic packet detection */
- clrbits32(&ug_regs->maccfg2, MACCFG2_MPE);
-}
-#endif /* MAGIC_PACKET */
-
static inline int compare_addr(u8 **addr1, u8 **addr2)
{
return memcmp(addr1, addr2, ENET_NUM_OCTETS_PER_ADDRESS);
@@ -1443,183 +1412,6 @@
return 0;
}
-/* Called every time the controller might need to be made
- * aware of new link state. The PHY code conveys this
- * information through variables in the ugeth structure, and this
- * function converts those variables into the appropriate
- * register values, and can bring down the device if needed.
- */
-
-static void adjust_link(struct net_device *dev)
-{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
- struct ucc_geth __iomem *ug_regs;
- struct ucc_fast __iomem *uf_regs;
- struct phy_device *phydev = ugeth->phydev;
- unsigned long flags;
- int new_state = 0;
-
- ug_regs = ugeth->ug_regs;
- uf_regs = ugeth->uccf->uf_regs;
-
- spin_lock_irqsave(&ugeth->lock, flags);
-
- if (phydev->link) {
- u32 tempval = in_be32(&ug_regs->maccfg2);
- u32 upsmr = in_be32(&uf_regs->upsmr);
- /* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
- if (phydev->duplex != ugeth->oldduplex) {
- new_state = 1;
- if (!(phydev->duplex))
- tempval &= ~(MACCFG2_FDX);
- else
- tempval |= MACCFG2_FDX;
- ugeth->oldduplex = phydev->duplex;
- }
-
- if (phydev->speed != ugeth->oldspeed) {
- new_state = 1;
- switch (phydev->speed) {
- case SPEED_1000:
- tempval = ((tempval &
- ~(MACCFG2_INTERFACE_MODE_MASK)) |
- MACCFG2_INTERFACE_MODE_BYTE);
- break;
- case SPEED_100:
- case SPEED_10:
- tempval = ((tempval &
- ~(MACCFG2_INTERFACE_MODE_MASK)) |
- MACCFG2_INTERFACE_MODE_NIBBLE);
- /* if reduced mode, re-set UPSMR.R10M */
- if ((ugeth->phy_interface == PHY_INTERFACE_MODE_RMII) ||
- (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII) ||
- (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_ID) ||
- (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
- (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
- (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
- if (phydev->speed == SPEED_10)
- upsmr |= UCC_GETH_UPSMR_R10M;
- else
- upsmr &= ~UCC_GETH_UPSMR_R10M;
- }
- break;
- default:
- if (netif_msg_link(ugeth))
- ugeth_warn(
- "%s: Ack! Speed (%d) is not 10/100/1000!",
- dev->name, phydev->speed);
- break;
- }
- ugeth->oldspeed = phydev->speed;
- }
-
- out_be32(&ug_regs->maccfg2, tempval);
- out_be32(&uf_regs->upsmr, upsmr);
-
- if (!ugeth->oldlink) {
- new_state = 1;
- ugeth->oldlink = 1;
- }
- } else if (ugeth->oldlink) {
- new_state = 1;
- ugeth->oldlink = 0;
- ugeth->oldspeed = 0;
- ugeth->oldduplex = -1;
- }
-
- if (new_state && netif_msg_link(ugeth))
- phy_print_status(phydev);
-
- spin_unlock_irqrestore(&ugeth->lock, flags);
-}
-
-/* Initialize TBI PHY interface for communicating with the
- * SERDES lynx PHY on the chip. We communicate with this PHY
- * through the MDIO bus on each controller, treating it as a
- * "normal" PHY at the address found in the UTBIPA register. We assume
- * that the UTBIPA register is valid. Either the MDIO bus code will set
- * it to a value that doesn't conflict with other PHYs on the bus, or the
- * value doesn't matter, as there are no other PHYs on the bus.
- */
-static void uec_configure_serdes(struct net_device *dev)
-{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
- struct ucc_geth_info *ug_info = ugeth->ug_info;
- struct phy_device *tbiphy;
-
- if (!ug_info->tbi_node) {
- dev_warn(&dev->dev, "SGMII mode requires that the device "
- "tree specify a tbi-handle\n");
- return;
- }
-
- tbiphy = of_phy_find_device(ug_info->tbi_node);
- if (!tbiphy) {
- dev_err(&dev->dev, "error: Could not get TBI device\n");
- return;
- }
-
- /*
- * If the link is already up, we must already be ok, and don't need to
- * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
- * everything for us? Resetting it takes the link down and requires
- * several seconds for it to come back.
- */
- if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
- return;
-
- /* Single clk mode, mii mode off(for serdes communication) */
- phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
-
- phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
-
- phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
-}
-
-/* Configure the PHY for dev.
- * returns 0 if success. -1 if failure
- */
-static int init_phy(struct net_device *dev)
-{
- struct ucc_geth_private *priv = netdev_priv(dev);
- struct ucc_geth_info *ug_info = priv->ug_info;
- struct phy_device *phydev;
-
- priv->oldlink = 0;
- priv->oldspeed = 0;
- priv->oldduplex = -1;
-
- phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
- priv->phy_interface);
- if (!phydev)
- phydev = of_phy_connect_fixed_link(dev, &adjust_link,
- priv->phy_interface);
- if (!phydev) {
- dev_err(&dev->dev, "Could not attach to PHY\n");
- return -ENODEV;
- }
-
- if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
- uec_configure_serdes(dev);
-
- phydev->supported &= (ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full);
-
- if (priv->max_speed == SPEED_1000)
- phydev->supported |= ADVERTISED_1000baseT_Full;
-
- phydev->advertising = phydev->supported;
-
- priv->phydev = phydev;
-
- return 0;
-}
-
-
-
static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
{
struct ucc_fast_private *uccf;
@@ -1650,7 +1442,7 @@
return 0;
}
-static int ugeth_graceful_stop_rx(struct ucc_geth_private * ugeth)
+static int ugeth_graceful_stop_rx(struct ucc_geth_private *ugeth)
{
struct ucc_fast_private *uccf;
u32 cecr_subblock;
@@ -1743,7 +1535,7 @@
}
-static int ugeth_disable(struct ucc_geth_private * ugeth, enum comm_dir mode)
+static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
{
struct ucc_fast_private *uccf;
@@ -1769,6 +1561,207 @@
return 0;
}
+static void ugeth_quiesce(struct ucc_geth_private *ugeth)
+{
+ /* Wait for and prevent any further xmits. */
+ netif_tx_disable(ugeth->ndev);
+
+ /* Disable the interrupt to avoid NAPI rescheduling. */
+ disable_irq(ugeth->ug_info->uf_info.irq);
+
+ /* Stop NAPI, and possibly wait for its completion. */
+ napi_disable(&ugeth->napi);
+}
+
+static void ugeth_activate(struct ucc_geth_private *ugeth)
+{
+ napi_enable(&ugeth->napi);
+ enable_irq(ugeth->ug_info->uf_info.irq);
+ netif_tx_wake_all_queues(ugeth->ndev);
+}
+
+/* Called every time the controller might need to be made
+ * aware of new link state. The PHY code conveys this
+ * information through variables in the ugeth structure, and this
+ * function converts those variables into the appropriate
+ * register values, and can bring down the device if needed.
+ */
+
+static void adjust_link(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth __iomem *ug_regs;
+ struct ucc_fast __iomem *uf_regs;
+ struct phy_device *phydev = ugeth->phydev;
+ int new_state = 0;
+
+ ug_regs = ugeth->ug_regs;
+ uf_regs = ugeth->uccf->uf_regs;
+
+ if (phydev->link) {
+ u32 tempval = in_be32(&ug_regs->maccfg2);
+ u32 upsmr = in_be32(&uf_regs->upsmr);
+ /* Now we make sure that we can be in full duplex mode.
+ * If not, we operate in half-duplex mode. */
+ if (phydev->duplex != ugeth->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ tempval &= ~(MACCFG2_FDX);
+ else
+ tempval |= MACCFG2_FDX;
+ ugeth->oldduplex = phydev->duplex;
+ }
+
+ if (phydev->speed != ugeth->oldspeed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case SPEED_1000:
+ tempval = ((tempval &
+ ~(MACCFG2_INTERFACE_MODE_MASK)) |
+ MACCFG2_INTERFACE_MODE_BYTE);
+ break;
+ case SPEED_100:
+ case SPEED_10:
+ tempval = ((tempval &
+ ~(MACCFG2_INTERFACE_MODE_MASK)) |
+ MACCFG2_INTERFACE_MODE_NIBBLE);
+ /* if reduced mode, re-set UPSMR.R10M */
+ if ((ugeth->phy_interface == PHY_INTERFACE_MODE_RMII) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+ (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
+ if (phydev->speed == SPEED_10)
+ upsmr |= UCC_GETH_UPSMR_R10M;
+ else
+ upsmr &= ~UCC_GETH_UPSMR_R10M;
+ }
+ break;
+ default:
+ if (netif_msg_link(ugeth))
+ ugeth_warn(
+ "%s: Ack! Speed (%d) is not 10/100/1000!",
+ dev->name, phydev->speed);
+ break;
+ }
+ ugeth->oldspeed = phydev->speed;
+ }
+
+ /*
+ * To change the MAC configuration we need to disable the
+ * controller. To do so, we have to either grab ugeth->lock,
+ * which is a bad idea since 'graceful stop' commands might
+ * take quite a while, or we can quiesce driver's activity.
+ */
+ ugeth_quiesce(ugeth);
+ ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+
+ out_be32(&ug_regs->maccfg2, tempval);
+ out_be32(&uf_regs->upsmr, upsmr);
+
+ ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+ ugeth_activate(ugeth);
+
+ if (!ugeth->oldlink) {
+ new_state = 1;
+ ugeth->oldlink = 1;
+ }
+ } else if (ugeth->oldlink) {
+ new_state = 1;
+ ugeth->oldlink = 0;
+ ugeth->oldspeed = 0;
+ ugeth->oldduplex = -1;
+ }
+
+ if (new_state && netif_msg_link(ugeth))
+ phy_print_status(phydev);
+}
+
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip. We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register. We assume
+ * that the UTBIPA register is valid. Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct ucc_geth_info *ug_info = ugeth->ug_info;
+ struct phy_device *tbiphy;
+
+ if (!ug_info->tbi_node) {
+ dev_warn(&dev->dev, "SGMII mode requires that the device "
+ "tree specify a tbi-handle\n");
+ return;
+ }
+
+ tbiphy = of_phy_find_device(ug_info->tbi_node);
+ if (!tbiphy) {
+ dev_err(&dev->dev, "error: Could not get TBI device\n");
+ return;
+ }
+
+ /*
+ * If the link is already up, we must already be ok, and don't need to
+ * configure and reset the TBI<->SerDes link. Maybe U-Boot configured
+ * everything for us? Resetting it takes the link down and requires
+ * several seconds for it to come back.
+ */
+ if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+ return;
+
+ /* Single clk mode, mii mode off(for serdes communication) */
+ phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
+
+ phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+ phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+}
+
+/* Configure the PHY for dev.
+ * returns 0 if success. -1 if failure
+ */
+static int init_phy(struct net_device *dev)
+{
+ struct ucc_geth_private *priv = netdev_priv(dev);
+ struct ucc_geth_info *ug_info = priv->ug_info;
+ struct phy_device *phydev;
+
+ priv->oldlink = 0;
+ priv->oldspeed = 0;
+ priv->oldduplex = -1;
+
+ phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
+ priv->phy_interface);
+ if (!phydev)
+ phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+ priv->phy_interface);
+ if (!phydev) {
+ dev_err(&dev->dev, "Could not attach to PHY\n");
+ return -ENODEV;
+ }
+
+ if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
+ uec_configure_serdes(dev);
+
+ phydev->supported &= (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full);
+
+ if (priv->max_speed == SPEED_1000)
+ phydev->supported |= ADVERTISED_1000baseT_Full;
+
+ phydev->advertising = phydev->supported;
+
+ priv->phydev = phydev;
+
+ return 0;
+}
+
static void ugeth_dump_regs(struct ucc_geth_private *ugeth)
{
#ifdef DEBUG
@@ -1986,6 +1979,8 @@
iounmap(ugeth->ug_regs);
ugeth->ug_regs = NULL;
}
+
+ skb_queue_purge(&ugeth->rx_recycle);
}
static void ucc_geth_set_multi(struct net_device *dev)
@@ -2202,6 +2197,8 @@
return -ENOMEM;
}
+ skb_queue_head_init(&ugeth->rx_recycle);
+
return 0;
}
@@ -3174,7 +3171,7 @@
#endif
spin_unlock_irqrestore(&ugeth->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static int ucc_geth_rx(struct ucc_geth_private *ugeth, u8 rxQ, int rx_work_limit)
@@ -3209,8 +3206,10 @@
if (netif_msg_rx_err(ugeth))
ugeth_err("%s, %d: ERROR!!! skb - 0x%08x",
__func__, __LINE__, (u32) skb);
- if (skb)
- dev_kfree_skb_any(skb);
+ if (skb) {
+ skb->data = skb->head + NET_SKB_PAD;
+ __skb_queue_head(&ugeth->rx_recycle, skb);
+ }
ugeth->rx_skbuff[rxQ][ugeth->skb_currx[rxQ]] = NULL;
dev->stats.rx_dropped++;
@@ -3268,6 +3267,8 @@
/* Normal processing. */
while ((bd_status & T_R) == 0) {
+ struct sk_buff *skb;
+
/* BD contains already transmitted buffer. */
/* Handle the transmitted buffer and release */
/* the BD to be used with the current frame */
@@ -3277,9 +3278,16 @@
dev->stats.tx_packets++;
- /* Free the sk buffer associated with this TxBD */
- dev_kfree_skb(ugeth->
- tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]]);
+ skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
+
+ if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN &&
+ skb_recycle_check(skb,
+ ugeth->ug_info->uf_info.max_rx_buf_length +
+ UCC_GETH_RX_DATA_BUF_ALIGNMENT))
+ __skb_queue_head(&ugeth->rx_recycle, skb);
+ else
+ dev_kfree_skb(skb);
+
ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]] = NULL;
ugeth->skb_dirtytx[txQ] =
(ugeth->skb_dirtytx[txQ] +
@@ -3308,16 +3316,16 @@
ug_info = ugeth->ug_info;
- howmany = 0;
- for (i = 0; i < ug_info->numQueuesRx; i++)
- howmany += ucc_geth_rx(ugeth, i, budget - howmany);
-
/* Tx event processing */
spin_lock(&ugeth->lock);
for (i = 0; i < ug_info->numQueuesTx; i++)
ucc_geth_tx(ugeth->ndev, i);
spin_unlock(&ugeth->lock);
+ howmany = 0;
+ for (i = 0; i < ug_info->numQueuesRx; i++)
+ howmany += ucc_geth_rx(ugeth, i, budget - howmany);
+
if (howmany < budget) {
napi_complete(napi);
setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS | UCCE_TX_EVENTS);
@@ -3414,46 +3422,25 @@
return 0;
}
-/* Called when something needs to use the ethernet device */
-/* Returns 0 for success. */
-static int ucc_geth_open(struct net_device *dev)
+static int ucc_geth_init_mac(struct ucc_geth_private *ugeth)
{
- struct ucc_geth_private *ugeth = netdev_priv(dev);
+ struct net_device *dev = ugeth->ndev;
int err;
- ugeth_vdbg("%s: IN", __func__);
-
- /* Test station address */
- if (dev->dev_addr[0] & ENET_GROUP_ADDR) {
- if (netif_msg_ifup(ugeth))
- ugeth_err("%s: Multicast address used for station address"
- " - is this what you wanted?", __func__);
- return -EINVAL;
- }
-
- err = init_phy(dev);
- if (err) {
- if (netif_msg_ifup(ugeth))
- ugeth_err("%s: Cannot initialize PHY, aborting.",
- dev->name);
- return err;
- }
-
err = ucc_struct_init(ugeth);
if (err) {
if (netif_msg_ifup(ugeth))
- ugeth_err("%s: Cannot configure internal struct, aborting.", dev->name);
- goto out_err_stop;
+ ugeth_err("%s: Cannot configure internal struct, "
+ "aborting.", dev->name);
+ goto err;
}
- napi_enable(&ugeth->napi);
-
err = ucc_geth_startup(ugeth);
if (err) {
if (netif_msg_ifup(ugeth))
ugeth_err("%s: Cannot configure net device, aborting.",
dev->name);
- goto out_err;
+ goto err;
}
err = adjust_enet_interface(ugeth);
@@ -3461,7 +3448,7 @@
if (netif_msg_ifup(ugeth))
ugeth_err("%s: Cannot configure net device, aborting.",
dev->name);
- goto out_err;
+ goto err;
}
/* Set MACSTNADDR1, MACSTNADDR2 */
@@ -3475,13 +3462,51 @@
&ugeth->ug_regs->macstnaddr1,
&ugeth->ug_regs->macstnaddr2);
- phy_start(ugeth->phydev);
-
err = ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
if (err) {
if (netif_msg_ifup(ugeth))
ugeth_err("%s: Cannot enable net device, aborting.", dev->name);
- goto out_err;
+ goto err;
+ }
+
+ return 0;
+err:
+ ucc_geth_stop(ugeth);
+ return err;
+}
+
+/* Called when something needs to use the ethernet device */
+/* Returns 0 for success. */
+static int ucc_geth_open(struct net_device *dev)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(dev);
+ int err;
+
+ ugeth_vdbg("%s: IN", __func__);
+
+ /* Test station address */
+ if (dev->dev_addr[0] & ENET_GROUP_ADDR) {
+ if (netif_msg_ifup(ugeth))
+ ugeth_err("%s: Multicast address used for station "
+ "address - is this what you wanted?",
+ __func__);
+ return -EINVAL;
+ }
+
+ err = init_phy(dev);
+ if (err) {
+ if (netif_msg_ifup(ugeth))
+ ugeth_err("%s: Cannot initialize PHY, aborting.",
+ dev->name);
+ return err;
+ }
+
+ err = ucc_geth_init_mac(ugeth);
+ if (err) {
+ if (netif_msg_ifup(ugeth))
+ ugeth_err("%s: Cannot initialize MAC, aborting.",
+ dev->name);
+ goto err;
}
err = request_irq(ugeth->ug_info->uf_info.irq, ucc_geth_irq_handler,
@@ -3490,16 +3515,20 @@
if (netif_msg_ifup(ugeth))
ugeth_err("%s: Cannot get IRQ for net device, aborting.",
dev->name);
- goto out_err;
+ goto err;
}
+ phy_start(ugeth->phydev);
+ napi_enable(&ugeth->napi);
netif_start_queue(dev);
+ device_set_wakeup_capable(&dev->dev,
+ qe_alive_during_sleep() || ugeth->phydev->irq);
+ device_set_wakeup_enable(&dev->dev, ugeth->wol_en);
+
return err;
-out_err:
- napi_disable(&ugeth->napi);
-out_err_stop:
+err:
ucc_geth_stop(ugeth);
return err;
}
@@ -3561,6 +3590,85 @@
schedule_work(&ugeth->timeout_work);
}
+
+#ifdef CONFIG_PM
+
+static int ucc_geth_suspend(struct of_device *ofdev, pm_message_t state)
+{
+ struct net_device *ndev = dev_get_drvdata(&ofdev->dev);
+ struct ucc_geth_private *ugeth = netdev_priv(ndev);
+
+ if (!netif_running(ndev))
+ return 0;
+
+ napi_disable(&ugeth->napi);
+
+ /*
+ * Disable the controller, otherwise we'll wakeup on any network
+ * activity.
+ */
+ ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+
+ if (ugeth->wol_en & WAKE_MAGIC) {
+ setbits32(ugeth->uccf->p_uccm, UCC_GETH_UCCE_MPD);
+ setbits32(&ugeth->ug_regs->maccfg2, MACCFG2_MPE);
+ ucc_fast_enable(ugeth->uccf, COMM_DIR_RX_AND_TX);
+ } else if (!(ugeth->wol_en & WAKE_PHY)) {
+ phy_stop(ugeth->phydev);
+ }
+
+ return 0;
+}
+
+static int ucc_geth_resume(struct of_device *ofdev)
+{
+ struct net_device *ndev = dev_get_drvdata(&ofdev->dev);
+ struct ucc_geth_private *ugeth = netdev_priv(ndev);
+ int err;
+
+ if (!netif_running(ndev))
+ return 0;
+
+ if (qe_alive_during_sleep()) {
+ if (ugeth->wol_en & WAKE_MAGIC) {
+ ucc_fast_disable(ugeth->uccf, COMM_DIR_RX_AND_TX);
+ clrbits32(&ugeth->ug_regs->maccfg2, MACCFG2_MPE);
+ clrbits32(ugeth->uccf->p_uccm, UCC_GETH_UCCE_MPD);
+ }
+ ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+ } else {
+ /*
+ * Full reinitialization is required if QE shuts down
+ * during sleep.
+ */
+ ucc_geth_memclean(ugeth);
+
+ err = ucc_geth_init_mac(ugeth);
+ if (err) {
+ ugeth_err("%s: Cannot initialize MAC, aborting.",
+ ndev->name);
+ return err;
+ }
+ }
+
+ ugeth->oldlink = 0;
+ ugeth->oldspeed = 0;
+ ugeth->oldduplex = -1;
+
+ phy_stop(ugeth->phydev);
+ phy_start(ugeth->phydev);
+
+ napi_enable(&ugeth->napi);
+ netif_start_queue(ndev);
+
+ return 0;
+}
+
+#else
+#define ucc_geth_suspend NULL
+#define ucc_geth_resume NULL
+#endif
+
static phy_interface_t to_phy_interface(const char *phy_connection_type)
{
if (strcasecmp(phy_connection_type, "mii") == 0)
@@ -3852,6 +3960,8 @@
.match_table = ucc_geth_match,
.probe = ucc_geth_probe,
.remove = ucc_geth_remove,
+ .suspend = ucc_geth_suspend,
+ .resume = ucc_geth_resume,
};
static int __init ucc_geth_init(void)
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 195ab26..03a6ca0 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1212,6 +1212,8 @@
/* index of the first skb which hasn't been transmitted yet. */
u16 skb_dirtytx[NUM_TX_QUEUES];
+ struct sk_buff_head rx_recycle;
+
struct ugeth_mii_info *mii_info;
struct phy_device *phydev;
phy_interface_t phy_interface;
@@ -1220,6 +1222,7 @@
int oldspeed;
int oldduplex;
int oldlink;
+ int wol_en;
struct device_node *node;
};
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 61fe80d..7075f26 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -319,9 +319,13 @@
int i, j = 0;
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) {
- base = (u32 __iomem *)&ugeth->ug_regs->tx64;
+ if (ugeth->ug_regs)
+ base = (u32 __iomem *)&ugeth->ug_regs->tx64;
+ else
+ base = NULL;
+
for (i = 0; i < UEC_HW_STATS_LEN; i++)
- data[j++] = in_be32(&base[i]);
+ data[j++] = base ? in_be32(&base[i]) : 0;
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) {
base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram;
@@ -355,6 +359,44 @@
drvinfo->regdump_len = uec_get_regs_len(netdev);
}
+#ifdef CONFIG_PM
+
+static void uec_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(netdev);
+ struct phy_device *phydev = ugeth->phydev;
+
+ if (phydev && phydev->irq)
+ wol->supported |= WAKE_PHY;
+ if (qe_alive_during_sleep())
+ wol->supported |= WAKE_MAGIC;
+
+ wol->wolopts = ugeth->wol_en;
+}
+
+static int uec_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct ucc_geth_private *ugeth = netdev_priv(netdev);
+ struct phy_device *phydev = ugeth->phydev;
+
+ if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+ return -EINVAL;
+ else if (wol->wolopts & WAKE_PHY && (!phydev || !phydev->irq))
+ return -EINVAL;
+ else if (wol->wolopts & WAKE_MAGIC && !qe_alive_during_sleep())
+ return -EINVAL;
+
+ ugeth->wol_en = wol->wolopts;
+ device_set_wakeup_enable(&netdev->dev, ugeth->wol_en);
+
+ return 0;
+}
+
+#else
+#define uec_get_wol NULL
+#define uec_set_wol NULL
+#endif /* CONFIG_PM */
+
static const struct ethtool_ops uec_ethtool_ops = {
.get_settings = uec_get_settings,
.set_settings = uec_set_settings,
@@ -373,6 +415,8 @@
.get_sset_count = uec_get_sset_count,
.get_strings = uec_get_strings,
.get_ethtool_stats = uec_get_ethtool_stats,
+ .get_wol = uec_get_wol,
+ .set_wol = uec_set_wol,
};
void uec_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 87b4a02..6ce7f77 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -731,7 +731,7 @@
/* We need to override some ethtool_ops so we require our
own structure so we don't interfere with other usbnet
devices that may be connected at the same time. */
-static struct ethtool_ops ax88172_ethtool_ops = {
+static const struct ethtool_ops ax88172_ethtool_ops = {
.get_drvinfo = asix_get_drvinfo,
.get_link = asix_get_link,
.get_msglevel = usbnet_get_msglevel,
@@ -873,7 +873,7 @@
return ret;
}
-static struct ethtool_ops ax88772_ethtool_ops = {
+static const struct ethtool_ops ax88772_ethtool_ops = {
.get_drvinfo = asix_get_drvinfo,
.get_link = asix_get_link,
.get_msglevel = usbnet_get_msglevel,
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index b9dd425..2bed6b0 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -411,7 +411,8 @@
spin_unlock_irqrestore(&catc->tx_lock, flags);
}
-static int catc_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t catc_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
struct catc *catc = netdev_priv(netdev);
unsigned long flags;
@@ -448,7 +449,7 @@
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void catc_tx_timeout(struct net_device *netdev)
@@ -697,7 +698,7 @@
return 0;
}
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = catc_get_drvinfo,
.get_settings = catc_get_settings,
.get_link = ethtool_op_get_link
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
index 792af72..97e54d9 100644
--- a/drivers/net/usb/cdc-phonet.c
+++ b/drivers/net/usb/cdc-phonet.c
@@ -27,6 +27,7 @@
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/if_phonet.h>
+#include <linux/phonet.h>
#define PN_MEDIA_USB 0x1B
@@ -55,7 +56,7 @@
/*
* Network device callbacks
*/
-static int usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct usbpn_dev *pnd = netdev_priv(dev);
struct urb *req = NULL;
@@ -82,12 +83,12 @@
if (pnd->tx_queue >= dev->tx_queue_len)
netif_stop_queue(dev);
spin_unlock_irqrestore(&pnd->tx_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
drop:
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
static void tx_complete(struct urb *req)
@@ -256,6 +257,19 @@
return usb_set_interface(pnd->usb, num, !pnd->active_setting);
}
+static int usbpn_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct if_phonet_req *req = (struct if_phonet_req *)ifr;
+
+ switch (cmd) {
+ case SIOCPNGAUTOCONF:
+ req->ifr_phonet_autoconf.device = PN_DEV_PC;
+ printk(KERN_CRIT"device is PN_DEV_PC\n");
+ return 0;
+ }
+ return -ENOIOCTLCMD;
+}
+
static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
{
if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
@@ -269,6 +283,7 @@
.ndo_open = usbpn_open,
.ndo_stop = usbpn_close,
.ndo_start_xmit = usbpn_xmit,
+ .ndo_do_ioctl = usbpn_ioctl,
.ndo_change_mtu = usbpn_set_mtu,
};
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 1d3730d..72470f7 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -356,7 +356,7 @@
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
-static struct ethtool_ops dm9601_ethtool_ops = {
+static const struct ethtool_ops dm9601_ethtool_ops = {
.get_drvinfo = dm9601_get_drvinfo,
.get_link = dm9601_get_link,
.get_msglevel = usbnet_get_msglevel,
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index f8c6d7e..fa4e581 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -771,7 +771,8 @@
}
/* called by kernel when we need to transmit a packet */
-static int hso_net_start_xmit(struct sk_buff *skb, struct net_device *net)
+static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
+ struct net_device *net)
{
struct hso_net *odev = netdev_priv(net);
int result;
@@ -780,7 +781,7 @@
netif_stop_queue(net);
if (hso_get_activity(odev->parent) == -EAGAIN) {
odev->skb_tx_buf = skb;
- return 0;
+ return NETDEV_TX_OK;
}
/* log if asked */
@@ -828,7 +829,7 @@
usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info);
}
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = hso_get_drvinfo,
.get_link = ethtool_op_get_link
};
@@ -2534,6 +2535,10 @@
}
}
+static struct device_type hso_type = {
+ .name = "wwan",
+};
+
/* Creates our network device */
static struct hso_device *hso_create_net_device(struct usb_interface *interface,
int port_spec)
@@ -2574,6 +2579,7 @@
goto exit;
}
SET_NETDEV_DEV(net, &interface->dev);
+ SET_NETDEV_DEVTYPE(net, &hso_type);
/* registering our net device */
result = register_netdev(net);
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 1f9ec29..e2a39b9 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -778,7 +778,7 @@
return kaweth->linkstate;
}
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = kaweth_get_drvinfo,
.get_link = kaweth_get_link
};
@@ -803,7 +803,8 @@
/****************************************************************
* kaweth_start_xmit
****************************************************************/
-static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
+static netdev_tx_t kaweth_start_xmit(struct sk_buff *skb,
+ struct net_device *net)
{
struct kaweth_device *kaweth = netdev_priv(net);
__le16 *private_header;
@@ -829,7 +830,7 @@
kaweth->stats.tx_errors++;
netif_start_queue(net);
spin_unlock_irq(&kaweth->device_lock);
- return 0;
+ return NETDEV_TX_OK;
}
}
@@ -864,7 +865,7 @@
spin_unlock_irq(&kaweth->device_lock);
- return 0;
+ return NETDEV_TX_OK;
}
/****************************************************************
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 7ae9afe..10873d9 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -449,7 +449,7 @@
mcs7830_get_reg(dev, 0, regs->len, data);
}
-static struct ethtool_ops mcs7830_ethtool_ops = {
+static const struct ethtool_ops mcs7830_ethtool_ops = {
.get_drvinfo = mcs7830_get_drvinfo,
.get_regs_len = mcs7830_get_regs_len,
.get_regs = mcs7830_get_regs,
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 631d269a..6fdaba8 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -876,7 +876,8 @@
pegasus->stats.tx_errors++;
}
-static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net)
+static netdev_tx_t pegasus_start_xmit(struct sk_buff *skb,
+ struct net_device *net)
{
pegasus_t *pegasus = netdev_priv(net);
int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
@@ -914,7 +915,7 @@
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
@@ -1173,7 +1174,7 @@
pegasus->msg_enable = v;
}
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = pegasus_get_drvinfo,
.get_settings = pegasus_get_settings,
.set_settings = pegasus_set_settings,
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 2232232..d032bba 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -65,6 +65,32 @@
EXPORT_SYMBOL_GPL(rndis_status);
/*
+ * RNDIS indicate messages.
+ */
+static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg,
+ int buflen)
+{
+ struct cdc_state *info = (void *)&dev->data;
+ struct device *udev = &info->control->dev;
+
+ if (dev->driver_info->indication) {
+ dev->driver_info->indication(dev, msg, buflen);
+ } else {
+ switch (msg->status) {
+ case RNDIS_STATUS_MEDIA_CONNECT:
+ dev_info(udev, "rndis media connect\n");
+ break;
+ case RNDIS_STATUS_MEDIA_DISCONNECT:
+ dev_info(udev, "rndis media disconnect\n");
+ break;
+ default:
+ dev_info(udev, "rndis indication: 0x%08x\n",
+ le32_to_cpu(msg->status));
+ }
+ }
+}
+
+/*
* RPC done RNDIS-style. Caller guarantees:
* - message is properly byteswapped
* - there's no other request pending
@@ -143,27 +169,9 @@
request_id, xid);
/* then likely retry */
} else switch (buf->msg_type) {
- case RNDIS_MSG_INDICATE: { /* fault/event */
- struct rndis_indicate *msg = (void *)buf;
- int state = 0;
+ case RNDIS_MSG_INDICATE: /* fault/event */
+ rndis_msg_indicate(dev, (void *)buf, buflen);
- switch (msg->status) {
- case RNDIS_STATUS_MEDIA_CONNECT:
- state = 1;
- case RNDIS_STATUS_MEDIA_DISCONNECT:
- dev_info(&info->control->dev,
- "rndis media %sconnect\n",
- !state?"dis":"");
- if (dev->driver_info->link_change)
- dev->driver_info->link_change(
- dev, state);
- break;
- default:
- dev_info(&info->control->dev,
- "rndis indication: 0x%08x\n",
- le32_to_cpu(msg->status));
- }
- }
break;
case RNDIS_MSG_KEEPALIVE: { /* ping */
struct rndis_keepalive_c *msg = (void *)buf;
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index fcc6fa0..b091e20 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -727,7 +727,8 @@
netif_wake_queue(netdev);
}
-static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
int count, res;
@@ -753,7 +754,7 @@
netdev->trans_start = jiffies;
}
- return 0;
+ return NETDEV_TX_OK;
}
@@ -864,7 +865,7 @@
return 0;
}
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = rtl8150_get_drvinfo,
.get_settings = rtl8150_get_settings,
.get_link = ethtool_op_get_link
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index fe04589..938fb35 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -220,11 +220,6 @@
do {
smsc95xx_read_reg(dev, E2P_CMD, &val);
- if (!(val & E2P_CMD_LOADED_)) {
- devwarn(dev, "No EEPROM present");
- return -EIO;
- }
-
if (!(val & E2P_CMD_BUSY_))
return 0;
@@ -630,7 +625,7 @@
return smsc95xx_set_csums(dev);
}
-static struct ethtool_ops smsc95xx_ethtool_ops = {
+static const struct ethtool_ops smsc95xx_ethtool_ops = {
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
.get_drvinfo = usbnet_get_drvinfo,
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index edfd9e1..24b36f7 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -233,6 +233,11 @@
{
int status;
+ if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
+ skb_queue_tail(&dev->rxq_pause, skb);
+ return;
+ }
+
skb->protocol = eth_type_trans (skb, dev->net);
dev->net->stats.rx_packets++;
dev->net->stats.rx_bytes += skb->len;
@@ -526,6 +531,41 @@
}
/*-------------------------------------------------------------------------*/
+void usbnet_pause_rx(struct usbnet *dev)
+{
+ set_bit(EVENT_RX_PAUSED, &dev->flags);
+
+ if (netif_msg_rx_status(dev))
+ devdbg(dev, "paused rx queue enabled");
+}
+EXPORT_SYMBOL_GPL(usbnet_pause_rx);
+
+void usbnet_resume_rx(struct usbnet *dev)
+{
+ struct sk_buff *skb;
+ int num = 0;
+
+ clear_bit(EVENT_RX_PAUSED, &dev->flags);
+
+ while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
+ usbnet_skb_return(dev, skb);
+ num++;
+ }
+
+ tasklet_schedule(&dev->bh);
+
+ if (netif_msg_rx_status(dev))
+ devdbg(dev, "paused rx queue disabled, %d skbs requeued", num);
+}
+EXPORT_SYMBOL_GPL(usbnet_resume_rx);
+
+void usbnet_purge_paused_rxq(struct usbnet *dev)
+{
+ skb_queue_purge(&dev->rxq_pause);
+}
+EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
+
+/*-------------------------------------------------------------------------*/
// unlink pending rx/tx; completion handlers do all other cleanup
@@ -575,7 +615,9 @@
int usbnet_stop (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
+ struct driver_info *info = dev->driver_info;
int temp;
+ int retval;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK (unlink_wakeup);
DECLARE_WAITQUEUE (wait, current);
@@ -587,24 +629,42 @@
net->stats.rx_errors, net->stats.tx_errors
);
- // ensure there are no more active urbs
- add_wait_queue (&unlink_wakeup, &wait);
- dev->wait = &unlink_wakeup;
- temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq);
-
- // maybe wait for deletions to finish.
- while (!skb_queue_empty(&dev->rxq)
- && !skb_queue_empty(&dev->txq)
- && !skb_queue_empty(&dev->done)) {
- msleep(UNLINK_TIMEOUT_MS);
- if (netif_msg_ifdown (dev))
- devdbg (dev, "waited for %d urb completions", temp);
+ /* allow minidriver to stop correctly (wireless devices to turn off
+ * radio etc) */
+ if (info->stop) {
+ retval = info->stop(dev);
+ if (retval < 0 && netif_msg_ifdown(dev))
+ devinfo(dev,
+ "stop fail (%d) usbnet usb-%s-%s, %s",
+ retval,
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ info->description);
}
- dev->wait = NULL;
- remove_wait_queue (&unlink_wakeup, &wait);
+
+ if (!(info->flags & FLAG_AVOID_UNLINK_URBS)) {
+ /* ensure there are no more active urbs */
+ add_wait_queue(&unlink_wakeup, &wait);
+ dev->wait = &unlink_wakeup;
+ temp = unlink_urbs(dev, &dev->txq) +
+ unlink_urbs(dev, &dev->rxq);
+
+ /* maybe wait for deletions to finish. */
+ while (!skb_queue_empty(&dev->rxq)
+ && !skb_queue_empty(&dev->txq)
+ && !skb_queue_empty(&dev->done)) {
+ msleep(UNLINK_TIMEOUT_MS);
+ if (netif_msg_ifdown(dev))
+ devdbg(dev, "waited for %d urb completions",
+ temp);
+ }
+ dev->wait = NULL;
+ remove_wait_queue(&unlink_wakeup, &wait);
+ }
usb_kill_urb(dev->interrupt);
+ usbnet_purge_paused_rxq(dev);
+
/* deferred work (task, timer, softirq) must also stop.
* can't flush_scheduled_work() until we drop rtnl (later),
* else workers could deadlock; so make workers a NOP.
@@ -794,7 +854,7 @@
EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
/* drivers may override default ethtool_ops in their bind() routine */
-static struct ethtool_ops usbnet_ethtool_ops = {
+static const struct ethtool_ops usbnet_ethtool_ops = {
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.get_link = usbnet_get_link,
@@ -947,15 +1007,16 @@
/*-------------------------------------------------------------------------*/
-int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
+netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
+ struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
int length;
- int retval = NET_XMIT_SUCCESS;
struct urb *urb = NULL;
struct skb_data *entry;
struct driver_info *info = dev->driver_info;
unsigned long flags;
+ int retval;
// some devices want funky USB-level framing, for
// win32 driver (usually) and/or hardware quirks
@@ -1019,7 +1080,6 @@
if (netif_msg_tx_err (dev))
devdbg (dev, "drop, code %d", retval);
drop:
- retval = NET_XMIT_SUCCESS;
dev->net->stats.tx_dropped++;
if (skb)
dev_kfree_skb_any (skb);
@@ -1028,7 +1088,7 @@
devdbg (dev, "> tx, len %d, type 0x%x",
length, skb->protocol);
}
- return retval;
+ return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(usbnet_start_xmit);
@@ -1095,7 +1155,6 @@
}
-
/*-------------------------------------------------------------------------
*
* USB Device Driver support
@@ -1192,6 +1251,7 @@
skb_queue_head_init (&dev->rxq);
skb_queue_head_init (&dev->txq);
skb_queue_head_init (&dev->done);
+ skb_queue_head_init(&dev->rxq_pause);
dev->bh.func = usbnet_bh;
dev->bh.data = (unsigned long) dev;
INIT_WORK (&dev->kevent, kevent);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 1097c72..ade5b34 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -129,7 +129,7 @@
return 0;
}
-static struct ethtool_ops veth_ethtool_ops = {
+static const struct ethtool_ops veth_ethtool_ops = {
.get_settings = veth_get_settings,
.get_drvinfo = veth_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -148,7 +148,7 @@
* xmit
*/
-static int veth_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net_device *rcv = NULL;
struct veth_priv *priv, *rcv_priv;
@@ -171,6 +171,7 @@
if (skb->len > (rcv->mtu + MTU_PAD))
goto rx_drop;
+ skb->tstamp.tv64 = 0;
skb->pkt_type = PACKET_HOST;
skb->protocol = eth_type_trans(skb, rcv);
if (dev->features & NETIF_F_NO_CSUM)
@@ -189,17 +190,17 @@
rcv_stats->rx_packets++;
netif_rx(skb);
- return 0;
+ return NETDEV_TX_OK;
tx_drop:
kfree_skb(skb);
stats->tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
rx_drop:
kfree_skb(skb);
rcv_stats->rx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 934f767..1fd7058 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -408,7 +408,8 @@
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
static void rhine_tx_timeout(struct net_device *dev);
-static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
static void rhine_tx(struct net_device *dev);
static int rhine_rx(struct net_device *dev, int limit);
@@ -1213,7 +1214,8 @@
netif_wake_queue(dev);
}
-static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+ struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
@@ -1227,7 +1229,7 @@
entry = rp->cur_tx % TX_RING_SIZE;
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
rp->tx_skbuff[entry] = skb;
@@ -1239,7 +1241,7 @@
dev_kfree_skb(skb);
rp->tx_skbuff[entry] = NULL;
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
/* Padding is not copied and so must be redone. */
@@ -1287,7 +1289,7 @@
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
dev->name, rp->cur_tx-1, entry);
}
- return 0;
+ return NETDEV_TX_OK;
}
/* The interrupt handler does all of the Rx thread work and cleans up
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index cee08a1..e04e5be 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -61,9 +61,9 @@
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/wait.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/if.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/proc_fs.h>
#include <linux/inetdevice.h>
#include <linux/reboot.h>
@@ -81,7 +81,7 @@
#include "via-velocity.h"
-static int velocity_nics = 0;
+static int velocity_nics;
static int msglevel = MSG_LEVEL_INFO;
/**
@@ -92,8 +92,7 @@
* Fetch the mask bits of the selected CAM and store them into the
* provided mask buffer.
*/
-
-static void mac_get_cam_mask(struct mac_regs __iomem * regs, u8 * mask)
+static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
{
int i;
@@ -111,7 +110,6 @@
/* Select mar */
BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
}
@@ -122,8 +120,7 @@
*
* Store a new mask into a CAM
*/
-
-static void mac_set_cam_mask(struct mac_regs __iomem * regs, u8 * mask)
+static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
{
int i;
/* Select CAM mask */
@@ -131,9 +128,9 @@
writeb(CAMADDR_CAMEN, ®s->CAMADDR);
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < 8; i++)
writeb(*mask++, &(regs->MARCAM[i]));
- }
+
/* disable CAMEN */
writeb(0, ®s->CAMADDR);
@@ -141,7 +138,7 @@
BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
}
-static void mac_set_vlan_cam_mask(struct mac_regs __iomem * regs, u8 * mask)
+static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
{
int i;
/* Select CAM mask */
@@ -149,9 +146,9 @@
writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, ®s->CAMADDR);
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < 8; i++)
writeb(*mask++, &(regs->MARCAM[i]));
- }
+
/* disable CAMEN */
writeb(0, ®s->CAMADDR);
@@ -167,8 +164,7 @@
*
* Load an address or vlan tag into a CAM
*/
-
-static void mac_set_cam(struct mac_regs __iomem * regs, int idx, const u8 *addr)
+static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
{
int i;
@@ -179,9 +175,9 @@
writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR);
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++)
writeb(*addr++, &(regs->MARCAM[i]));
- }
+
BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR);
udelay(10);
@@ -192,7 +188,7 @@
BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
}
-static void mac_set_vlan_cam(struct mac_regs __iomem * regs, int idx,
+static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
const u8 *addr)
{
@@ -223,8 +219,7 @@
* reset the Wake on lan features. This function doesn't restore
* the rest of the logic from the result of sleep/wakeup
*/
-
-static void mac_wol_reset(struct mac_regs __iomem * regs)
+static void mac_wol_reset(struct mac_regs __iomem *regs)
{
/* Turn off SWPTAG right after leaving power mode */
@@ -242,7 +237,6 @@
writew(0xFFFF, ®s->WOLSRClr);
}
-static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static const struct ethtool_ops velocity_ethtool_ops;
/*
@@ -253,10 +247,10 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
-#define VELOCITY_PARAM(N,D) \
- static int N[MAX_UNITS]=OPTION_DEFAULT;\
+#define VELOCITY_PARAM(N, D) \
+ static int N[MAX_UNITS] = OPTION_DEFAULT;\
module_param_array(N, int, NULL, 0); \
- MODULE_PARM_DESC(N, D);
+ MODULE_PARM_DESC(N, D);
#define RX_DESC_MIN 64
#define RX_DESC_MAX 255
@@ -336,8 +330,8 @@
4: indicate 10Mbps full duplex mode
Note:
- if EEPROM have been set to the force mode, this option is ignored
- by driver.
+ if EEPROM have been set to the force mode, this option is ignored
+ by driver.
*/
VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
@@ -370,76 +364,14 @@
module_param(rx_copybreak, int, 0644);
MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
-static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr,
- const struct velocity_info_tbl *info);
-static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev);
-static void velocity_print_info(struct velocity_info *vptr);
-static int velocity_open(struct net_device *dev);
-static int velocity_change_mtu(struct net_device *dev, int mtu);
-static int velocity_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t velocity_intr(int irq, void *dev_instance);
-static void velocity_set_multi(struct net_device *dev);
-static struct net_device_stats *velocity_get_stats(struct net_device *dev);
-static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static int velocity_close(struct net_device *dev);
-static int velocity_receive_frame(struct velocity_info *, int idx);
-static int velocity_alloc_rx_buf(struct velocity_info *, int idx);
-static void velocity_free_rd_ring(struct velocity_info *vptr);
-static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *);
-static int velocity_soft_reset(struct velocity_info *vptr);
-static void mii_init(struct velocity_info *vptr, u32 mii_status);
-static u32 velocity_get_link(struct net_device *dev);
-static u32 velocity_get_opt_media_mode(struct velocity_info *vptr);
-static void velocity_print_link_status(struct velocity_info *vptr);
-static void safe_disable_mii_autopoll(struct mac_regs __iomem * regs);
-static void velocity_shutdown(struct velocity_info *vptr);
-static void enable_flow_control_ability(struct velocity_info *vptr);
-static void enable_mii_autopoll(struct mac_regs __iomem * regs);
-static int velocity_mii_read(struct mac_regs __iomem *, u8 byIdx, u16 * pdata);
-static int velocity_mii_write(struct mac_regs __iomem *, u8 byMiiAddr, u16 data);
-static u32 mii_check_media_mode(struct mac_regs __iomem * regs);
-static u32 check_connection_type(struct mac_regs __iomem * regs);
-static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status);
-
#ifdef CONFIG_PM
-
-static int velocity_suspend(struct pci_dev *pdev, pm_message_t state);
-static int velocity_resume(struct pci_dev *pdev);
-
static DEFINE_SPINLOCK(velocity_dev_list_lock);
static LIST_HEAD(velocity_dev_list);
-
-#endif
-
-#if defined(CONFIG_PM) && defined(CONFIG_INET)
-
-static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr);
-
-static struct notifier_block velocity_inetaddr_notifier = {
- .notifier_call = velocity_netdev_event,
-};
-
-static void velocity_register_notifier(void)
-{
- register_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-static void velocity_unregister_notifier(void)
-{
- unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
-}
-
-#else
-
-#define velocity_register_notifier() do {} while (0)
-#define velocity_unregister_notifier() do {} while (0)
-
#endif
/*
* Internal board variants. At the moment we have only one
*/
-
static struct velocity_info_tbl chip_info_table[] = {
{CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
{ }
@@ -449,7 +381,6 @@
* Describe the PCI device identifiers that we support in this
* device driver. Used for hotplug autoloading.
*/
-
static const struct pci_device_id velocity_id_table[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
{ }
@@ -464,7 +395,6 @@
* Given a chip identifier return a suitable description. Returns
* a pointer a static string valid while the driver is loaded.
*/
-
static const char __devinit *get_chip_name(enum chip_type chip_id)
{
int i;
@@ -482,7 +412,6 @@
* unload for each active device that is present. Disconnects
* the device from the network layer and frees all the resources
*/
-
static void __devexit velocity_remove1(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
@@ -520,7 +449,6 @@
* all the verification and checking as well as reporting so that
* we don't duplicate code for each option.
*/
-
static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
{
if (val == -1)
@@ -549,8 +477,7 @@
* all the verification and checking as well as reporting so that
* we don't duplicate code for each option.
*/
-
-static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, const char *devname)
+static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname)
{
(*opt) &= (~flag);
if (val == -1)
@@ -575,7 +502,6 @@
* Turn the module and command options into a single structure
* for the current device
*/
-
static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
{
@@ -601,10 +527,9 @@
* Initialize the content addressable memory used for filters. Load
* appropriately according to the presence of VLAN
*/
-
static void velocity_init_cam_filter(struct velocity_info *vptr)
{
- struct mac_regs __iomem * regs = vptr->mac_regs;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
@@ -647,19 +572,19 @@
{
struct velocity_info *vptr = netdev_priv(dev);
- spin_lock_irq(&vptr->lock);
+ spin_lock_irq(&vptr->lock);
velocity_init_cam_filter(vptr);
- spin_unlock_irq(&vptr->lock);
+ spin_unlock_irq(&vptr->lock);
}
static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
{
struct velocity_info *vptr = netdev_priv(dev);
- spin_lock_irq(&vptr->lock);
+ spin_lock_irq(&vptr->lock);
vlan_group_set_device(vptr->vlgrp, vid, NULL);
velocity_init_cam_filter(vptr);
- spin_unlock_irq(&vptr->lock);
+ spin_unlock_irq(&vptr->lock);
}
static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
@@ -674,11 +599,10 @@
* Reset the ownership and status for the receive ring side.
* Hand all the receive queue to the NIC.
*/
-
static void velocity_rx_reset(struct velocity_info *vptr)
{
- struct mac_regs __iomem * regs = vptr->mac_regs;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
int i;
velocity_init_rx_ring_indexes(vptr);
@@ -696,6 +620,647 @@
}
/**
+ * velocity_get_opt_media_mode - get media selection
+ * @vptr: velocity adapter
+ *
+ * Get the media mode stored in EEPROM or module options and load
+ * mii_status accordingly. The requested link state information
+ * is also returned.
+ */
+static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
+{
+ u32 status = 0;
+
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_AUTO:
+ status = VELOCITY_AUTONEG_ENABLE;
+ break;
+ case SPD_DPX_100_FULL:
+ status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_10_FULL:
+ status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_100_HALF:
+ status = VELOCITY_SPEED_100;
+ break;
+ case SPD_DPX_10_HALF:
+ status = VELOCITY_SPEED_10;
+ break;
+ }
+ vptr->mii_status = status;
+ return status;
+}
+
+/**
+ * safe_disable_mii_autopoll - autopoll off
+ * @regs: velocity registers
+ *
+ * Turn off the autopoll and wait for it to disable on the chip
+ */
+static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ u16 ww;
+
+ /* turn off MAUTO */
+ writeb(0, ®s->MIICR);
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
+ break;
+ }
+}
+
+/**
+ * enable_mii_autopoll - turn on autopolling
+ * @regs: velocity registers
+ *
+ * Enable the MII link status autopoll feature on the Velocity
+ * hardware. Wait for it to enable.
+ */
+static void enable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ int ii;
+
+ writeb(0, &(regs->MIICR));
+ writeb(MIIADR_SWMPL, ®s->MIIADR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
+ break;
+ }
+
+ writeb(MIICR_MAUTO, ®s->MIICR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
+ break;
+ }
+
+}
+
+/**
+ * velocity_mii_read - read MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: buffer for received data
+ *
+ * Perform a single read of an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ writeb(index, ®s->MIIADR);
+
+ BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR);
+
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ if (!(readb(®s->MIICR) & MIICR_RCMD))
+ break;
+ }
+
+ *data = readw(®s->MIIDATA);
+
+ enable_mii_autopoll(regs);
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+
+/**
+ * mii_check_media_mode - check media state
+ * @regs: velocity registers
+ *
+ * Check the current MII status and determine the link status
+ * accordingly
+ */
+static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u16 ANAR;
+
+ if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
+ status |= VELOCITY_LINK_FAIL;
+
+ if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
+ status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+ else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
+ status |= (VELOCITY_SPEED_1000);
+ else {
+ velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+ if (ANAR & ANAR_TXFD)
+ status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
+ else if (ANAR & ANAR_TX)
+ status |= VELOCITY_SPEED_100;
+ else if (ANAR & ANAR_10FD)
+ status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
+ else
+ status |= (VELOCITY_SPEED_10);
+ }
+
+ if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
+ velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+ if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
+ == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
+ if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * velocity_mii_write - write MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: 16bit data for the MII register
+ *
+ * Perform a single write to an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ /* MII reg offset */
+ writeb(mii_addr, ®s->MIIADR);
+ /* set MII data */
+ writew(data, ®s->MIIDATA);
+
+ /* turn on MIICR_WCMD */
+ BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR);
+
+ /* W_MAX_TIMEOUT is the timeout period */
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(5);
+ if (!(readb(®s->MIICR) & MIICR_WCMD))
+ break;
+ }
+ enable_mii_autopoll(regs);
+
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/**
+ * set_mii_flow_control - flow control setup
+ * @vptr: velocity interface
+ *
+ * Set up the flow control on this interface according to
+ * the supplied user/eeprom options.
+ */
+static void set_mii_flow_control(struct velocity_info *vptr)
+{
+ /*Enable or Disable PAUSE in ANAR */
+ switch (vptr->options.flow_cntl) {
+ case FLOW_CNTL_TX:
+ MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_RX:
+ MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * mii_set_auto_on - autonegotiate on
+ * @vptr: velocity
+ *
+ * Enable autonegotation on this interface
+ */
+static void mii_set_auto_on(struct velocity_info *vptr)
+{
+ if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
+ MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
+ else
+ MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
+}
+
+static u32 check_connection_type(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u8 PHYSR0;
+ u16 ANAR;
+ PHYSR0 = readb(®s->PHYSR0);
+
+ /*
+ if (!(PHYSR0 & PHYSR0_LINKGD))
+ status|=VELOCITY_LINK_FAIL;
+ */
+
+ if (PHYSR0 & PHYSR0_FDPX)
+ status |= VELOCITY_DUPLEX_FULL;
+
+ if (PHYSR0 & PHYSR0_SPDG)
+ status |= VELOCITY_SPEED_1000;
+ else if (PHYSR0 & PHYSR0_SPD10)
+ status |= VELOCITY_SPEED_10;
+ else
+ status |= VELOCITY_SPEED_100;
+
+ if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
+ velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
+ if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
+ == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
+ if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+
+
+/**
+ * velocity_set_media_mode - set media mode
+ * @mii_status: old MII link state
+ *
+ * Check the media link state and configure the flow control
+ * PHY and also velocity hardware setup accordingly. In particular
+ * we need to set up CD polling and frame bursting.
+ */
+static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+{
+ u32 curr_status;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
+ curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
+
+ /* Set mii link status */
+ set_mii_flow_control(vptr);
+
+ /*
+ Check if new status is consisent with current status
+ if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
+ || (mii_status==curr_status)) {
+ vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
+ vptr->mii_status=check_connection_type(vptr->mac_regs);
+ VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
+ return 0;
+ }
+ */
+
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
+
+ /*
+ * If connection type is AUTO
+ */
+ if (mii_status & VELOCITY_AUTONEG_ENABLE) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
+ /* clear force MAC mode bit */
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
+ /* set duplex mode of MAC according to duplex mode of MII */
+ MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
+
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ } else {
+ u16 ANAR;
+ u8 CHIPGCR;
+
+ /*
+ * 1. if it's 3119, disable frame bursting in halfduplex mode
+ * and enable it in fullduplex mode
+ * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
+ * 3. only enable CD heart beat counter in 10HD mode
+ */
+
+ /* set force MAC mode bit */
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
+
+ CHIPGCR = readb(®s->CHIPGCR);
+ CHIPGCR &= ~CHIPGCR_FCGMII;
+
+ if (mii_status & VELOCITY_DUPLEX_FULL) {
+ CHIPGCR |= CHIPGCR_FCFDX;
+ writeb(CHIPGCR, ®s->CHIPGCR);
+ VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
+ } else {
+ CHIPGCR &= ~CHIPGCR_FCFDX;
+ VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
+ writeb(CHIPGCR, ®s->CHIPGCR);
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
+ }
+
+ MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
+
+ if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
+
+ /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
+ velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
+ ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
+ if (mii_status & VELOCITY_SPEED_100) {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ANAR_TXFD;
+ else
+ ANAR |= ANAR_TX;
+ } else {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ANAR_10FD;
+ else
+ ANAR |= ANAR_10;
+ }
+ velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
+ }
+ /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
+ /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
+ return VELOCITY_LINK_CHANGE;
+}
+
+/**
+ * velocity_print_link_status - link status reporting
+ * @vptr: velocity to report on
+ *
+ * Turn the link status of the velocity card into a kernel log
+ * description of the new link state, detailing speed and duplex
+ * status
+ */
+static void velocity_print_link_status(struct velocity_info *vptr)
+{
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
+ } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
+
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
+ else if (vptr->mii_status & VELOCITY_SPEED_100)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
+ else
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
+
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
+ else
+ VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
+ } else {
+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_100_HALF:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
+ break;
+ case SPD_DPX_100_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
+ break;
+ case SPD_DPX_10_HALF:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
+ break;
+ case SPD_DPX_10_FULL:
+ VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/**
+ * enable_flow_control_ability - flow control
+ * @vptr: veloity to configure
+ *
+ * Set up flow control according to the flow control options
+ * determined by the eeprom/configuration.
+ */
+static void enable_flow_control_ability(struct velocity_info *vptr)
+{
+
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ switch (vptr->options.flow_cntl) {
+
+ case FLOW_CNTL_DEFAULT:
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0))
+ writel(CR0_FDXRFCEN, ®s->CR0Set);
+ else
+ writel(CR0_FDXRFCEN, ®s->CR0Clr);
+
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0))
+ writel(CR0_FDXTFCEN, ®s->CR0Set);
+ else
+ writel(CR0_FDXTFCEN, ®s->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX:
+ writel(CR0_FDXTFCEN, ®s->CR0Set);
+ writel(CR0_FDXRFCEN, ®s->CR0Clr);
+ break;
+
+ case FLOW_CNTL_RX:
+ writel(CR0_FDXRFCEN, ®s->CR0Set);
+ writel(CR0_FDXTFCEN, ®s->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ writel(CR0_FDXTFCEN, ®s->CR0Set);
+ writel(CR0_FDXRFCEN, ®s->CR0Set);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ writel(CR0_FDXRFCEN, ®s->CR0Clr);
+ writel(CR0_FDXTFCEN, ®s->CR0Clr);
+ break;
+
+ default:
+ break;
+ }
+
+}
+
+/**
+ * velocity_soft_reset - soft reset
+ * @vptr: velocity to reset
+ *
+ * Kick off a soft reset of the velocity adapter and then poll
+ * until the reset sequence has completed before returning.
+ */
+static int velocity_soft_reset(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i = 0;
+
+ writel(CR0_SFRST, ®s->CR0Set);
+
+ for (i = 0; i < W_MAX_TIMEOUT; i++) {
+ udelay(5);
+ if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set))
+ break;
+ }
+
+ if (i == W_MAX_TIMEOUT) {
+ writel(CR0_FORSRST, ®s->CR0Set);
+ /* FIXME: PCI POSTING */
+ /* delay 2ms */
+ mdelay(2);
+ }
+ return 0;
+}
+
+/**
+ * velocity_set_multi - filter list change callback
+ * @dev: network device
+ *
+ * Called by the network layer when the filter lists need to change
+ * for a velocity adapter. Reload the CAMs with the new address
+ * filter ruleset.
+ */
+static void velocity_set_multi(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u8 rx_mode;
+ int i;
+ struct dev_mc_list *mclist;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ writel(0xffffffff, ®s->MARCAM[0]);
+ writel(0xffffffff, ®s->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
+ } else if ((dev->mc_count > vptr->multicast_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ writel(0xffffffff, ®s->MARCAM[0]);
+ writel(0xffffffff, ®s->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB);
+ } else {
+ int offset = MCAM_SIZE - vptr->multicast_limit;
+ mac_get_cam_mask(regs, vptr->mCAMmask);
+
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ mac_set_cam(regs, i + offset, mclist->dmi_addr);
+ vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+ }
+
+ mac_set_cam_mask(regs, vptr->mCAMmask);
+ rx_mode = RCR_AM | RCR_AB | RCR_AP;
+ }
+ if (dev->mtu > 1500)
+ rx_mode |= RCR_AL;
+
+ BYTE_REG_BITS_ON(rx_mode, ®s->RCR);
+
+}
+
+/*
+ * MII access , media link mode setting functions
+ */
+
+/**
+ * mii_init - set up MII
+ * @vptr: velocity adapter
+ * @mii_status: links tatus
+ *
+ * Set up the PHY for the current link state.
+ */
+static void mii_init(struct velocity_info *vptr, u32 mii_status)
+{
+ u16 BMCR;
+
+ switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
+ case PHYID_CICADA_CS8201:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue.
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ /*
+ * Turn on Link/Activity LED enable bit for CIS8201
+ */
+ MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
+ break;
+ case PHYID_VT3216_32BIT:
+ case PHYID_VT3216_64BIT:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
+ break;
+
+ case PHYID_MARVELL_1000:
+ case PHYID_MARVELL_1000S:
+ /*
+ * Assert CRS on Transmit
+ */
+ MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
+ break;
+ default:
+ ;
+ }
+ velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
+ if (BMCR & BMCR_ISO) {
+ BMCR &= ~BMCR_ISO;
+ velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
+ }
+}
+
+
+/**
* velocity_init_registers - initialise MAC registers
* @vptr: velocity to init
* @type: type of initialisation (hot or cold)
@@ -703,11 +1268,10 @@
* Initialise the MAC on a reset or on first set up on the
* hardware.
*/
-
static void velocity_init_registers(struct velocity_info *vptr,
enum velocity_init_type type)
{
- struct mac_regs __iomem * regs = vptr->mac_regs;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
int i, mii_status;
mac_wol_reset(regs);
@@ -750,9 +1314,9 @@
mdelay(5);
mac_eeprom_reload(regs);
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++)
writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
- }
+
/*
* clear Pre_ACPI bit.
*/
@@ -819,36 +1383,1166 @@
}
}
-/**
- * velocity_soft_reset - soft reset
- * @vptr: velocity to reset
- *
- * Kick off a soft reset of the velocity adapter and then poll
- * until the reset sequence has completed before returning.
- */
-
-static int velocity_soft_reset(struct velocity_info *vptr)
+static void velocity_give_many_rx_descs(struct velocity_info *vptr)
{
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i = 0;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int avail, dirty, unusable;
- writel(CR0_SFRST, ®s->CR0Set);
+ /*
+ * RD number must be equal to 4X per hardware spec
+ * (programming guide rev 1.20, p.13)
+ */
+ if (vptr->rx.filled < 4)
+ return;
- for (i = 0; i < W_MAX_TIMEOUT; i++) {
- udelay(5);
- if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set))
- break;
+ wmb();
+
+ unusable = vptr->rx.filled & 0x0003;
+ dirty = vptr->rx.dirty - unusable;
+ for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
+ dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+ vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
}
- if (i == W_MAX_TIMEOUT) {
- writel(CR0_FORSRST, ®s->CR0Set);
- /* FIXME: PCI POSTING */
- /* delay 2ms */
- mdelay(2);
+ writew(vptr->rx.filled & 0xfffc, ®s->RBRDU);
+ vptr->rx.filled = unusable;
+}
+
+/**
+ * velocity_init_dma_rings - set up DMA rings
+ * @vptr: Velocity to set up
+ *
+ * Allocate PCI mapped DMA rings for the receive and transmit layer
+ * to use.
+ */
+static int velocity_init_dma_rings(struct velocity_info *vptr)
+{
+ struct velocity_opt *opt = &vptr->options;
+ const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
+ const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc);
+ struct pci_dev *pdev = vptr->pdev;
+ dma_addr_t pool_dma;
+ void *pool;
+ unsigned int i;
+
+ /*
+ * Allocate all RD/TD rings a single pool.
+ *
+ * pci_alloc_consistent() fulfills the requirement for 64 bytes
+ * alignment
+ */
+ pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
+ rx_ring_size, &pool_dma);
+ if (!pool) {
+ dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
+ vptr->dev->name);
+ return -ENOMEM;
+ }
+
+ vptr->rx.ring = pool;
+ vptr->rx.pool_dma = pool_dma;
+
+ pool += rx_ring_size;
+ pool_dma += rx_ring_size;
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ vptr->tx.rings[i] = pool;
+ vptr->tx.pool_dma[i] = pool_dma;
+ pool += tx_ring_size;
+ pool_dma += tx_ring_size;
+ }
+
+ return 0;
+}
+
+static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
+{
+ vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+}
+
+/**
+ * velocity_alloc_rx_buf - allocate aligned receive buffer
+ * @vptr: velocity
+ * @idx: ring index
+ *
+ * Allocate a new full sized buffer for the reception of a frame and
+ * map it into PCI space for the hardware to use. The hardware
+ * requires *64* byte alignment of the buffer which makes life
+ * less fun than would be ideal.
+ */
+static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
+{
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+
+ rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
+ if (rd_info->skb == NULL)
+ return -ENOMEM;
+
+ /*
+ * Do the gymnastics to get the buffer head for data at
+ * 64byte alignment.
+ */
+ skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
+ rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
+ vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
+
+ /*
+ * Fill in the descriptor to match
+ */
+
+ *((u32 *) & (rd->rdesc0)) = 0;
+ rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
+ rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+ rd->pa_high = 0;
+ return 0;
+}
+
+
+static int velocity_rx_refill(struct velocity_info *vptr)
+{
+ int dirty = vptr->rx.dirty, done = 0;
+
+ do {
+ struct rx_desc *rd = vptr->rx.ring + dirty;
+
+ /* Fine for an all zero Rx desc at init time as well */
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if (!vptr->rx.info[dirty].skb) {
+ if (velocity_alloc_rx_buf(vptr, dirty) < 0)
+ break;
+ }
+ done++;
+ dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
+ } while (dirty != vptr->rx.curr);
+
+ if (done) {
+ vptr->rx.dirty = dirty;
+ vptr->rx.filled += done;
+ }
+
+ return done;
+}
+
+/**
+ * velocity_free_rd_ring - free receive ring
+ * @vptr: velocity to clean up
+ *
+ * Free the receive buffers for each ring slot and any
+ * attached socket buffers that need to go away.
+ */
+static void velocity_free_rd_ring(struct velocity_info *vptr)
+{
+ int i;
+
+ if (vptr->rx.info == NULL)
+ return;
+
+ for (i = 0; i < vptr->options.numrx; i++) {
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+ struct rx_desc *rd = vptr->rx.ring + i;
+
+ memset(rd, 0, sizeof(*rd));
+
+ if (!rd_info->skb)
+ continue;
+ pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
+ PCI_DMA_FROMDEVICE);
+ rd_info->skb_dma = 0;
+
+ dev_kfree_skb(rd_info->skb);
+ rd_info->skb = NULL;
+ }
+
+ kfree(vptr->rx.info);
+ vptr->rx.info = NULL;
+}
+
+
+
+/**
+ * velocity_init_rd_ring - set up receive ring
+ * @vptr: velocity to configure
+ *
+ * Allocate and set up the receive buffers for each ring slot and
+ * assign them to the network adapter.
+ */
+static int velocity_init_rd_ring(struct velocity_info *vptr)
+{
+ int ret = -ENOMEM;
+
+ vptr->rx.info = kcalloc(vptr->options.numrx,
+ sizeof(struct velocity_rd_info), GFP_KERNEL);
+ if (!vptr->rx.info)
+ goto out;
+
+ velocity_init_rx_ring_indexes(vptr);
+
+ if (velocity_rx_refill(vptr) != vptr->options.numrx) {
+ VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
+ "%s: failed to allocate RX buffer.\n", vptr->dev->name);
+ velocity_free_rd_ring(vptr);
+ goto out;
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+/**
+ * velocity_init_td_ring - set up transmit ring
+ * @vptr: velocity
+ *
+ * Set up the transmit ring and chain the ring pointers together.
+ * Returns zero on success or a negative posix errno code for
+ * failure.
+ */
+static int velocity_init_td_ring(struct velocity_info *vptr)
+{
+ dma_addr_t curr;
+ int j;
+
+ /* Init the TD ring entries */
+ for (j = 0; j < vptr->tx.numq; j++) {
+ curr = vptr->tx.pool_dma[j];
+
+ vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
+ sizeof(struct velocity_td_info),
+ GFP_KERNEL);
+ if (!vptr->tx.infos[j]) {
+ while (--j >= 0)
+ kfree(vptr->tx.infos[j]);
+ return -ENOMEM;
+ }
+
+ vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
}
return 0;
}
+/**
+ * velocity_free_dma_rings - free PCI ring pointers
+ * @vptr: Velocity to free from
+ *
+ * Clean up the PCI ring buffers allocated to this velocity.
+ */
+static void velocity_free_dma_rings(struct velocity_info *vptr)
+{
+ const int size = vptr->options.numrx * sizeof(struct rx_desc) +
+ vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
+
+ pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
+}
+
+
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+ int ret;
+
+ velocity_set_rxbufsize(vptr, mtu);
+
+ ret = velocity_init_dma_rings(vptr);
+ if (ret < 0)
+ goto out;
+
+ ret = velocity_init_rd_ring(vptr);
+ if (ret < 0)
+ goto err_free_dma_rings_0;
+
+ ret = velocity_init_td_ring(vptr);
+ if (ret < 0)
+ goto err_free_rd_ring_1;
+out:
+ return ret;
+
+err_free_rd_ring_1:
+ velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+ velocity_free_dma_rings(vptr);
+ goto out;
+}
+
+/**
+ * velocity_free_tx_buf - free transmit buffer
+ * @vptr: velocity
+ * @tdinfo: buffer
+ *
+ * Release an transmit buffer. If the buffer was preallocated then
+ * recycle it, if not then unmap the buffer.
+ */
+static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo)
+{
+ struct sk_buff *skb = tdinfo->skb;
+ int i;
+ int pktlen;
+
+ /*
+ * Don't unmap the pre-allocated tx_bufs
+ */
+ if (tdinfo->skb_dma) {
+
+ pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
+ for (i = 0; i < tdinfo->nskb_dma; i++) {
+ pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
+ tdinfo->skb_dma[i] = 0;
+ }
+ }
+ dev_kfree_skb_irq(skb);
+ tdinfo->skb = NULL;
+}
+
+
+/*
+ * FIXME: could we merge this with velocity_free_tx_buf ?
+ */
+static void velocity_free_td_ring_entry(struct velocity_info *vptr,
+ int q, int n)
+{
+ struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]);
+ int i;
+
+ if (td_info == NULL)
+ return;
+
+ if (td_info->skb) {
+ for (i = 0; i < td_info->nskb_dma; i++) {
+ if (td_info->skb_dma[i]) {
+ pci_unmap_single(vptr->pdev, td_info->skb_dma[i],
+ td_info->skb->len, PCI_DMA_TODEVICE);
+ td_info->skb_dma[i] = 0;
+ }
+ }
+ dev_kfree_skb(td_info->skb);
+ td_info->skb = NULL;
+ }
+}
+
+/**
+ * velocity_free_td_ring - free td ring
+ * @vptr: velocity
+ *
+ * Free up the transmit ring for this particular velocity adapter.
+ * We free the ring contents but not the ring itself.
+ */
+static void velocity_free_td_ring(struct velocity_info *vptr)
+{
+ int i, j;
+
+ for (j = 0; j < vptr->tx.numq; j++) {
+ if (vptr->tx.infos[j] == NULL)
+ continue;
+ for (i = 0; i < vptr->options.numtx; i++)
+ velocity_free_td_ring_entry(vptr, j, i);
+
+ kfree(vptr->tx.infos[j]);
+ vptr->tx.infos[j] = NULL;
+ }
+}
+
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+ velocity_free_td_ring(vptr);
+ velocity_free_rd_ring(vptr);
+ velocity_free_dma_rings(vptr);
+}
+
+/**
+ * velocity_error - handle error from controller
+ * @vptr: velocity
+ * @status: card status
+ *
+ * Process an error report from the hardware and attempt to recover
+ * the card itself. At the moment we cannot recover from some
+ * theoretically impossible errors but this could be fixed using
+ * the pci_device_failed logic to bounce the hardware
+ *
+ */
+static void velocity_error(struct velocity_info *vptr, int status)
+{
+
+ if (status & ISR_TXSTLI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0]));
+ BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR);
+ writew(TRDCSR_RUN, ®s->TDCSRClr);
+ netif_stop_queue(vptr->dev);
+
+ /* FIXME: port over the pci_device_failed code and use it
+ here */
+ }
+
+ if (status & ISR_SRCI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int linked;
+
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ vptr->mii_status = check_connection_type(regs);
+
+ /*
+ * If it is a 3119, disable frame bursting in
+ * halfduplex mode and enable it in fullduplex
+ * mode
+ */
+ if (vptr->rev_id < REV_ID_VT3216_A0) {
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
+ else
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
+ }
+ /*
+ * Only enable CD heart beat counter in 10HD mode
+ */
+ if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
+ }
+ /*
+ * Get link status from PHYSR0
+ */
+ linked = readb(®s->PHYSR0) & PHYSR0_LINKGD;
+
+ if (linked) {
+ vptr->mii_status &= ~VELOCITY_LINK_FAIL;
+ netif_carrier_on(vptr->dev);
+ } else {
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
+ netif_carrier_off(vptr->dev);
+ }
+
+ velocity_print_link_status(vptr);
+ enable_flow_control_ability(vptr);
+
+ /*
+ * Re-enable auto-polling because SRCI will disable
+ * auto-polling
+ */
+
+ enable_mii_autopoll(regs);
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL)
+ netif_stop_queue(vptr->dev);
+ else
+ netif_wake_queue(vptr->dev);
+
+ };
+ if (status & ISR_MIBFI)
+ velocity_update_hw_mibs(vptr);
+ if (status & ISR_LSTEI)
+ mac_rx_queue_wake(vptr->mac_regs);
+}
+
+/**
+ * tx_srv - transmit interrupt service
+ * @vptr; Velocity
+ * @status:
+ *
+ * Scan the queues looking for transmitted packets that
+ * we can complete and clean up. Update any statistics as
+ * necessary/
+ */
+static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+{
+ struct tx_desc *td;
+ int qnum;
+ int full = 0;
+ int idx;
+ int works = 0;
+ struct velocity_td_info *tdinfo;
+ struct net_device_stats *stats = &vptr->dev->stats;
+
+ for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+ for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
+ idx = (idx + 1) % vptr->options.numtx) {
+
+ /*
+ * Get Tx Descriptor
+ */
+ td = &(vptr->tx.rings[qnum][idx]);
+ tdinfo = &(vptr->tx.infos[qnum][idx]);
+
+ if (td->tdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if ((works++ > 15))
+ break;
+
+ if (td->tdesc0.TSR & TSR0_TERR) {
+ stats->tx_errors++;
+ stats->tx_dropped++;
+ if (td->tdesc0.TSR & TSR0_CDH)
+ stats->tx_heartbeat_errors++;
+ if (td->tdesc0.TSR & TSR0_CRS)
+ stats->tx_carrier_errors++;
+ if (td->tdesc0.TSR & TSR0_ABT)
+ stats->tx_aborted_errors++;
+ if (td->tdesc0.TSR & TSR0_OWC)
+ stats->tx_window_errors++;
+ } else {
+ stats->tx_packets++;
+ stats->tx_bytes += tdinfo->skb->len;
+ }
+ velocity_free_tx_buf(vptr, tdinfo);
+ vptr->tx.used[qnum]--;
+ }
+ vptr->tx.tail[qnum] = idx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ full = 1;
+ }
+ /*
+ * Look to see if we should kick the transmit network
+ * layer for more work.
+ */
+ if (netif_queue_stopped(vptr->dev) && (full == 0)
+ && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
+ netif_wake_queue(vptr->dev);
+ }
+ return works;
+}
+
+/**
+ * velocity_rx_csum - checksum process
+ * @rd: receive packet descriptor
+ * @skb: network layer packet buffer
+ *
+ * Process the status bits for the received packet and determine
+ * if the checksum was computed and verified by the hardware
+ */
+static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
+{
+ skb->ip_summed = CHECKSUM_NONE;
+
+ if (rd->rdesc1.CSM & CSM_IPKT) {
+ if (rd->rdesc1.CSM & CSM_IPOK) {
+ if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+ (rd->rdesc1.CSM & CSM_UDPKT)) {
+ if (!(rd->rdesc1.CSM & CSM_TUPOK))
+ return;
+ }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ }
+}
+
+/**
+ * velocity_rx_copy - in place Rx copy for small packets
+ * @rx_skb: network layer packet buffer candidate
+ * @pkt_size: received data size
+ * @rd: receive packet descriptor
+ * @dev: network device
+ *
+ * Replace the current skb that is scheduled for Rx processing by a
+ * shorter, immediatly allocated skb, if the received packet is small
+ * enough. This function returns a negative value if the received
+ * packet is too big or if memory is exhausted.
+ */
+static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
+ struct velocity_info *vptr)
+{
+ int ret = -1;
+ if (pkt_size < rx_copybreak) {
+ struct sk_buff *new_skb;
+
+ new_skb = netdev_alloc_skb(vptr->dev, pkt_size + 2);
+ if (new_skb) {
+ new_skb->ip_summed = rx_skb[0]->ip_summed;
+ skb_reserve(new_skb, 2);
+ skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
+ *rx_skb = new_skb;
+ ret = 0;
+ }
+
+ }
+ return ret;
+}
+
+/**
+ * velocity_iph_realign - IP header alignment
+ * @vptr: velocity we are handling
+ * @skb: network layer packet buffer
+ * @pkt_size: received data size
+ *
+ * Align IP header on a 2 bytes boundary. This behavior can be
+ * configured by the user.
+ */
+static inline void velocity_iph_realign(struct velocity_info *vptr,
+ struct sk_buff *skb, int pkt_size)
+{
+ if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
+ memmove(skb->data + 2, skb->data, pkt_size);
+ skb_reserve(skb, 2);
+ }
+}
+
+
+/**
+ * velocity_receive_frame - received packet processor
+ * @vptr: velocity we are handling
+ * @idx: ring index
+ *
+ * A packet has arrived. We process the packet and if appropriate
+ * pass the frame up the network stack
+ */
+static int velocity_receive_frame(struct velocity_info *vptr, int idx)
+{
+ void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
+ struct net_device_stats *stats = &vptr->dev->stats;
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
+ struct sk_buff *skb;
+
+ if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
+ VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+
+ if (rd->rdesc0.RSR & RSR_MAR)
+ stats->multicast++;
+
+ skb = rd_info->skb;
+
+ pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
+ vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
+
+ /*
+ * Drop frame not meeting IEEE 802.3
+ */
+
+ if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
+ if (rd->rdesc0.RSR & RSR_RL) {
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+ }
+
+ pci_action = pci_dma_sync_single_for_device;
+
+ velocity_rx_csum(rd, skb);
+
+ if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
+ velocity_iph_realign(vptr, skb, pkt_len);
+ pci_action = pci_unmap_single;
+ rd_info->skb = NULL;
+ }
+
+ pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, vptr->dev);
+
+ if (vptr->vlgrp && (rd->rdesc0.RSR & RSR_DETAG)) {
+ vlan_hwaccel_rx(skb, vptr->vlgrp,
+ swab16(le16_to_cpu(rd->rdesc1.PQTAG)));
+ } else
+ netif_rx(skb);
+
+ stats->rx_bytes += pkt_len;
+
+ return 0;
+}
+
+
+/**
+ * velocity_rx_srv - service RX interrupt
+ * @vptr: velocity
+ * @status: adapter status (unused)
+ *
+ * Walk the receive ring of the velocity adapter and remove
+ * any received packets from the receive queue. Hand the ring
+ * slots back to the adapter for reuse.
+ */
+static int velocity_rx_srv(struct velocity_info *vptr, int status)
+{
+ struct net_device_stats *stats = &vptr->dev->stats;
+ int rd_curr = vptr->rx.curr;
+ int works = 0;
+
+ do {
+ struct rx_desc *rd = vptr->rx.ring + rd_curr;
+
+ if (!vptr->rx.info[rd_curr].skb)
+ break;
+
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
+
+ rmb();
+
+ /*
+ * Don't drop CE or RL error frame although RXOK is off
+ */
+ if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
+ if (velocity_receive_frame(vptr, rd_curr) < 0)
+ stats->rx_dropped++;
+ } else {
+ if (rd->rdesc0.RSR & RSR_CRC)
+ stats->rx_crc_errors++;
+ if (rd->rdesc0.RSR & RSR_FAE)
+ stats->rx_frame_errors++;
+
+ stats->rx_dropped++;
+ }
+
+ rd->size |= RX_INTEN;
+
+ rd_curr++;
+ if (rd_curr >= vptr->options.numrx)
+ rd_curr = 0;
+ } while (++works <= 15);
+
+ vptr->rx.curr = rd_curr;
+
+ if ((works > 0) && (velocity_rx_refill(vptr) > 0))
+ velocity_give_many_rx_descs(vptr);
+
+ VAR_USED(stats);
+ return works;
+}
+
+
+/**
+ * velocity_intr - interrupt callback
+ * @irq: interrupt number
+ * @dev_instance: interrupting device
+ *
+ * Called whenever an interrupt is generated by the velocity
+ * adapter IRQ line. We may not be the source of the interrupt
+ * and need to identify initially if we are, and if not exit as
+ * efficiently as possible.
+ */
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 isr_status;
+ int max_count = 0;
+
+
+ spin_lock(&vptr->lock);
+ isr_status = mac_read_isr(vptr->mac_regs);
+
+ /* Not us ? */
+ if (isr_status == 0) {
+ spin_unlock(&vptr->lock);
+ return IRQ_NONE;
+ }
+
+ mac_disable_int(vptr->mac_regs);
+
+ /*
+ * Keep processing the ISR until we have completed
+ * processing and the isr_status becomes zero
+ */
+
+ while (isr_status != 0) {
+ mac_write_isr(vptr->mac_regs, isr_status);
+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+ velocity_error(vptr, isr_status);
+ if (isr_status & (ISR_PRXI | ISR_PPRXI))
+ max_count += velocity_rx_srv(vptr, isr_status);
+ if (isr_status & (ISR_PTXI | ISR_PPTXI))
+ max_count += velocity_tx_srv(vptr, isr_status);
+ isr_status = mac_read_isr(vptr->mac_regs);
+ if (max_count > vptr->options.int_works) {
+ printk(KERN_WARNING "%s: excessive work at interrupt.\n",
+ dev->name);
+ max_count = 0;
+ }
+ }
+ spin_unlock(&vptr->lock);
+ mac_enable_int(vptr->mac_regs);
+ return IRQ_HANDLED;
+
+}
+
+/**
+ * velocity_open - interface activation callback
+ * @dev: network layer device to open
+ *
+ * Called when the network layer brings the interface up. Returns
+ * a negative posix error code on failure, or zero on success.
+ *
+ * All the ring allocation and set up is done on open for this
+ * adapter to minimise memory usage when inactive
+ */
+static int velocity_open(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ ret = velocity_init_rings(vptr, dev->mtu);
+ if (ret < 0)
+ goto out;
+
+ /* Ensure chip is running */
+ pci_set_power_state(vptr->pdev, PCI_D0);
+
+ velocity_give_many_rx_descs(vptr);
+
+ velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+ ret = request_irq(vptr->pdev->irq, &velocity_intr, IRQF_SHARED,
+ dev->name, dev);
+ if (ret < 0) {
+ /* Power down the chip */
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+ velocity_free_rings(vptr);
+ goto out;
+ }
+
+ mac_enable_int(vptr->mac_regs);
+ netif_start_queue(dev);
+ vptr->flags |= VELOCITY_FLAGS_OPENED;
+out:
+ return ret;
+}
+
+/**
+ * velocity_shutdown - shut down the chip
+ * @vptr: velocity to deactivate
+ *
+ * Shuts down the internal operations of the velocity and
+ * disables interrupts, autopolling, transmit and receive
+ */
+static void velocity_shutdown(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ mac_disable_int(regs);
+ writel(CR0_STOP, ®s->CR0Set);
+ writew(0xFFFF, ®s->TDCSRClr);
+ writeb(0xFF, ®s->RDCSRClr);
+ safe_disable_mii_autopoll(regs);
+ mac_clear_isr(regs);
+}
+
+/**
+ * velocity_change_mtu - MTU change callback
+ * @dev: network device
+ * @new_mtu: desired MTU
+ *
+ * Handle requests from the networking layer for MTU change on
+ * this interface. It gets called on a change by the network layer.
+ * Return zero for success or negative posix error code.
+ */
+static int velocity_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret = 0;
+
+ if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
+ VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
+ vptr->dev->name);
+ ret = -EINVAL;
+ goto out_0;
+ }
+
+ if (!netif_running(dev)) {
+ dev->mtu = new_mtu;
+ goto out_0;
+ }
+
+ if (dev->mtu != new_mtu) {
+ struct velocity_info *tmp_vptr;
+ unsigned long flags;
+ struct rx_info rx;
+ struct tx_info tx;
+
+ tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+ if (!tmp_vptr) {
+ ret = -ENOMEM;
+ goto out_0;
+ }
+
+ tmp_vptr->dev = dev;
+ tmp_vptr->pdev = vptr->pdev;
+ tmp_vptr->options = vptr->options;
+ tmp_vptr->tx.numq = vptr->tx.numq;
+
+ ret = velocity_init_rings(tmp_vptr, new_mtu);
+ if (ret < 0)
+ goto out_free_tmp_vptr_1;
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ netif_stop_queue(dev);
+ velocity_shutdown(vptr);
+
+ rx = vptr->rx;
+ tx = vptr->tx;
+
+ vptr->rx = tmp_vptr->rx;
+ vptr->tx = tmp_vptr->tx;
+
+ tmp_vptr->rx = rx;
+ tmp_vptr->tx = tx;
+
+ dev->mtu = new_mtu;
+
+ velocity_give_many_rx_descs(vptr);
+
+ velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+ mac_enable_int(vptr->mac_regs);
+ netif_start_queue(dev);
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+ kfree(tmp_vptr);
+ }
+out_0:
+ return ret;
+}
+
+/**
+ * velocity_mii_ioctl - MII ioctl handler
+ * @dev: network device
+ * @ifr: the ifreq block for the ioctl
+ * @cmd: the command
+ *
+ * Process MII requests made via ioctl from the network layer. These
+ * are used by tools like kudzu to interrogate the link state of the
+ * hardware
+ */
+static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned long flags;
+ struct mii_ioctl_data *miidata = if_mii(ifr);
+ int err;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ miidata->phy_id = readb(®s->MIIADR) & 0x1f;
+ break;
+ case SIOCGMIIREG:
+ if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
+ return -ETIMEDOUT;
+ break;
+ case SIOCSMIIREG:
+ spin_lock_irqsave(&vptr->lock, flags);
+ err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ check_connection_type(vptr->mac_regs);
+ if (err)
+ return err;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+
+/**
+ * velocity_ioctl - ioctl entry point
+ * @dev: network device
+ * @rq: interface request ioctl
+ * @cmd: command code
+ *
+ * Called when the user issues an ioctl request to the network
+ * device in question. The velocity interface supports MII.
+ */
+static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ /* If we are asked for information and the device is power
+ saving then we need to bring the device back up to talk to it */
+
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D0);
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ case SIOCSMIIREG: /* Write to MII PHY register. */
+ ret = velocity_mii_ioctl(dev, rq, cmd);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ if (!netif_running(dev))
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+
+
+ return ret;
+}
+
+/**
+ * velocity_get_status - statistics callback
+ * @dev: network device
+ *
+ * Callback from the network layer to allow driver statistics
+ * to be resynchronized with hardware collected state. In the
+ * case of the velocity we need to pull the MIB counters from
+ * the hardware into the counters before letting the network
+ * layer display them.
+ */
+static struct net_device_stats *velocity_get_stats(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ /* If the hardware is down, don't touch MII */
+ if (!netif_running(dev))
+ return &dev->stats;
+
+ spin_lock_irq(&vptr->lock);
+ velocity_update_hw_mibs(vptr);
+ spin_unlock_irq(&vptr->lock);
+
+ dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+ dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+ dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+
+// unsigned long rx_dropped; /* no space in linux buffers */
+ dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+ /* detailed rx_errors: */
+// unsigned long rx_length_errors;
+// unsigned long rx_over_errors; /* receiver ring buff overflow */
+ dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+// unsigned long rx_frame_errors; /* recv'd frame alignment error */
+// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+// unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+// unsigned long tx_fifo_errors;
+
+ return &dev->stats;
+}
+
+/**
+ * velocity_close - close adapter callback
+ * @dev: network device
+ *
+ * Callback from the network layer when the velocity is being
+ * deactivated by the network layer
+ */
+static int velocity_close(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ velocity_shutdown(vptr);
+
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
+ velocity_get_ip(vptr);
+ if (dev->irq != 0)
+ free_irq(dev->irq, dev);
+
+ /* Power down the chip */
+ pci_set_power_state(vptr->pdev, PCI_D3hot);
+
+ velocity_free_rings(vptr);
+
+ vptr->flags &= (~VELOCITY_FLAGS_OPENED);
+ return 0;
+}
+
+/**
+ * velocity_xmit - transmit packet callback
+ * @skb: buffer to transmit
+ * @dev: network device
+ *
+ * Called by the networ layer to request a packet is queued to
+ * the velocity. Returns zero on success.
+ */
+static netdev_tx_t velocity_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int qnum = 0;
+ struct tx_desc *td_ptr;
+ struct velocity_td_info *tdinfo;
+ unsigned long flags;
+ int pktlen;
+ __le16 len;
+ int index;
+
+ if (skb_padto(skb, ETH_ZLEN))
+ goto out;
+ pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
+
+ len = cpu_to_le16(pktlen);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ index = vptr->tx.curr[qnum];
+ td_ptr = &(vptr->tx.rings[qnum][index]);
+ tdinfo = &(vptr->tx.infos[qnum][index]);
+
+ td_ptr->tdesc1.TCR = TCR0_TIC;
+ td_ptr->td_buf[0].size &= ~TD_QUEUE;
+
+ /*
+ * Map the linear network buffer into PCI space and
+ * add it to the transmit ring.
+ */
+ tdinfo->skb = skb;
+ tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
+ td_ptr->tdesc0.len = len;
+ td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+ td_ptr->td_buf[0].pa_high = 0;
+ td_ptr->td_buf[0].size = len;
+ tdinfo->nskb_dma = 1;
+
+ td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
+
+ if (vptr->vlgrp && vlan_tx_tag_present(skb)) {
+ td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb));
+ td_ptr->tdesc1.TCR |= TCR0_VETAG;
+ }
+
+ /*
+ * Handle hardware checksum
+ */
+ if ((vptr->flags & VELOCITY_FLAGS_TX_CSUM)
+ && (skb->ip_summed == CHECKSUM_PARTIAL)) {
+ const struct iphdr *ip = ip_hdr(skb);
+ if (ip->protocol == IPPROTO_TCP)
+ td_ptr->tdesc1.TCR |= TCR0_TCPCK;
+ else if (ip->protocol == IPPROTO_UDP)
+ td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
+ td_ptr->tdesc1.TCR |= TCR0_IPCK;
+ }
+ {
+
+ int prev = index - 1;
+
+ if (prev < 0)
+ prev = vptr->options.numtx - 1;
+ td_ptr->tdesc0.len |= OWNED_BY_NIC;
+ vptr->tx.used[qnum]++;
+ vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ netif_stop_queue(dev);
+
+ td_ptr = &(vptr->tx.rings[qnum][prev]);
+ td_ptr->td_buf[0].size |= TD_QUEUE;
+ mac_tx_queue_wake(vptr->mac_regs, qnum);
+ }
+ dev->trans_start = jiffies;
+ spin_unlock_irqrestore(&vptr->lock, flags);
+out:
+ return NETDEV_TX_OK;
+}
+
+
static const struct net_device_ops velocity_netdev_ops = {
.ndo_open = velocity_open,
.ndo_stop = velocity_close,
@@ -865,6 +2559,93 @@
};
/**
+ * velocity_init_info - init private data
+ * @pdev: PCI device
+ * @vptr: Velocity info
+ * @info: Board type
+ *
+ * Set up the initial velocity_info struct for the device that has been
+ * discovered.
+ */
+static void __devinit velocity_init_info(struct pci_dev *pdev,
+ struct velocity_info *vptr,
+ const struct velocity_info_tbl *info)
+{
+ memset(vptr, 0, sizeof(struct velocity_info));
+
+ vptr->pdev = pdev;
+ vptr->chip_id = info->chip_id;
+ vptr->tx.numq = info->txqueue;
+ vptr->multicast_limit = MCAM_SIZE;
+ spin_lock_init(&vptr->lock);
+ INIT_LIST_HEAD(&vptr->list);
+}
+
+/**
+ * velocity_get_pci_info - retrieve PCI info for device
+ * @vptr: velocity device
+ * @pdev: PCI device it matches
+ *
+ * Retrieve the PCI configuration space data that interests us from
+ * the kernel PCI layer
+ */
+static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
+{
+ vptr->rev_id = pdev->revision;
+
+ pci_set_master(pdev);
+
+ vptr->ioaddr = pci_resource_start(pdev, 0);
+ vptr->memaddr = pci_resource_start(pdev, 1);
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #0 is not an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #1 is an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
+ dev_err(&pdev->dev, "region #1 is too small.\n");
+ return -EINVAL;
+ }
+ vptr->pdev = pdev;
+
+ return 0;
+}
+
+/**
+ * velocity_print_info - per driver data
+ * @vptr: velocity
+ *
+ * Print per driver data as the kernel driver finds Velocity
+ * hardware
+ */
+static void __devinit velocity_print_info(struct velocity_info *vptr)
+{
+ struct net_device *dev = vptr->dev;
+
+ printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
+ printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
+ dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+}
+
+static u32 velocity_get_link(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0;
+}
+
+
+/**
* velocity_found1 - set up discovered velocity card
* @pdev: PCI device
* @ent: PCI device table entry that matched
@@ -872,7 +2653,6 @@
* Configure a discovered adapter from scratch. Return a negative
* errno error code on failure paths.
*/
-
static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int first = 1;
@@ -881,7 +2661,7 @@
const char *drv_string;
const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
struct velocity_info *vptr;
- struct mac_regs __iomem * regs;
+ struct mac_regs __iomem *regs;
int ret = -ENOMEM;
/* FIXME: this driver, like almost all other ethernet drivers,
@@ -976,9 +2756,6 @@
dev->netdev_ops = &velocity_netdev_ops;
dev->ethtool_ops = &velocity_ethtool_ops;
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
- dev->features |= NETIF_F_SG;
-#endif
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
NETIF_F_HW_VLAN_RX;
@@ -1024,1378 +2801,264 @@
goto out;
}
+
+#ifdef CONFIG_PM
/**
- * velocity_print_info - per driver data
- * @vptr: velocity
+ * wol_calc_crc - WOL CRC
+ * @pattern: data pattern
+ * @mask_pattern: mask
*
- * Print per driver data as the kernel driver finds Velocity
- * hardware
+ * Compute the wake on lan crc hashes for the packet header
+ * we are interested in.
*/
-
-static void __devinit velocity_print_info(struct velocity_info *vptr)
+static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
{
- struct net_device *dev = vptr->dev;
-
- printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
- printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- dev->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
-}
-
-/**
- * velocity_init_info - init private data
- * @pdev: PCI device
- * @vptr: Velocity info
- * @info: Board type
- *
- * Set up the initial velocity_info struct for the device that has been
- * discovered.
- */
-
-static void __devinit velocity_init_info(struct pci_dev *pdev,
- struct velocity_info *vptr,
- const struct velocity_info_tbl *info)
-{
- memset(vptr, 0, sizeof(struct velocity_info));
-
- vptr->pdev = pdev;
- vptr->chip_id = info->chip_id;
- vptr->tx.numq = info->txqueue;
- vptr->multicast_limit = MCAM_SIZE;
- spin_lock_init(&vptr->lock);
- INIT_LIST_HEAD(&vptr->list);
-}
-
-/**
- * velocity_get_pci_info - retrieve PCI info for device
- * @vptr: velocity device
- * @pdev: PCI device it matches
- *
- * Retrieve the PCI configuration space data that interests us from
- * the kernel PCI layer
- */
-
-static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
-{
- vptr->rev_id = pdev->revision;
-
- pci_set_master(pdev);
-
- vptr->ioaddr = pci_resource_start(pdev, 0);
- vptr->memaddr = pci_resource_start(pdev, 1);
-
- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
- dev_err(&pdev->dev,
- "region #0 is not an I/O resource, aborting.\n");
- return -EINVAL;
- }
-
- if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
- dev_err(&pdev->dev,
- "region #1 is an I/O resource, aborting.\n");
- return -EINVAL;
- }
-
- if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
- dev_err(&pdev->dev, "region #1 is too small.\n");
- return -EINVAL;
- }
- vptr->pdev = pdev;
-
- return 0;
-}
-
-/**
- * velocity_init_dma_rings - set up DMA rings
- * @vptr: Velocity to set up
- *
- * Allocate PCI mapped DMA rings for the receive and transmit layer
- * to use.
- */
-
-static int velocity_init_dma_rings(struct velocity_info *vptr)
-{
- struct velocity_opt *opt = &vptr->options;
- const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
- const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc);
- struct pci_dev *pdev = vptr->pdev;
- dma_addr_t pool_dma;
- void *pool;
- unsigned int i;
-
- /*
- * Allocate all RD/TD rings a single pool.
- *
- * pci_alloc_consistent() fulfills the requirement for 64 bytes
- * alignment
- */
- pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq +
- rx_ring_size, &pool_dma);
- if (!pool) {
- dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n",
- vptr->dev->name);
- return -ENOMEM;
- }
-
- vptr->rx.ring = pool;
- vptr->rx.pool_dma = pool_dma;
-
- pool += rx_ring_size;
- pool_dma += rx_ring_size;
-
- for (i = 0; i < vptr->tx.numq; i++) {
- vptr->tx.rings[i] = pool;
- vptr->tx.pool_dma[i] = pool_dma;
- pool += tx_ring_size;
- pool_dma += tx_ring_size;
- }
-
- return 0;
-}
-
-/**
- * velocity_free_dma_rings - free PCI ring pointers
- * @vptr: Velocity to free from
- *
- * Clean up the PCI ring buffers allocated to this velocity.
- */
-
-static void velocity_free_dma_rings(struct velocity_info *vptr)
-{
- const int size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
-
- pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
-}
-
-static void velocity_give_many_rx_descs(struct velocity_info *vptr)
-{
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int avail, dirty, unusable;
-
- /*
- * RD number must be equal to 4X per hardware spec
- * (programming guide rev 1.20, p.13)
- */
- if (vptr->rx.filled < 4)
- return;
-
- wmb();
-
- unusable = vptr->rx.filled & 0x0003;
- dirty = vptr->rx.dirty - unusable;
- for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
- dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
- vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
- }
-
- writew(vptr->rx.filled & 0xfffc, ®s->RBRDU);
- vptr->rx.filled = unusable;
-}
-
-static int velocity_rx_refill(struct velocity_info *vptr)
-{
- int dirty = vptr->rx.dirty, done = 0;
-
- do {
- struct rx_desc *rd = vptr->rx.ring + dirty;
-
- /* Fine for an all zero Rx desc at init time as well */
- if (rd->rdesc0.len & OWNED_BY_NIC)
- break;
-
- if (!vptr->rx.info[dirty].skb) {
- if (velocity_alloc_rx_buf(vptr, dirty) < 0)
- break;
- }
- done++;
- dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
- } while (dirty != vptr->rx.curr);
-
- if (done) {
- vptr->rx.dirty = dirty;
- vptr->rx.filled += done;
- }
-
- return done;
-}
-
-static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
-{
- vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
-}
-
-/**
- * velocity_init_rd_ring - set up receive ring
- * @vptr: velocity to configure
- *
- * Allocate and set up the receive buffers for each ring slot and
- * assign them to the network adapter.
- */
-
-static int velocity_init_rd_ring(struct velocity_info *vptr)
-{
- int ret = -ENOMEM;
-
- vptr->rx.info = kcalloc(vptr->options.numrx,
- sizeof(struct velocity_rd_info), GFP_KERNEL);
- if (!vptr->rx.info)
- goto out;
-
- velocity_init_rx_ring_indexes(vptr);
-
- if (velocity_rx_refill(vptr) != vptr->options.numrx) {
- VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
- "%s: failed to allocate RX buffer.\n", vptr->dev->name);
- velocity_free_rd_ring(vptr);
- goto out;
- }
-
- ret = 0;
-out:
- return ret;
-}
-
-/**
- * velocity_free_rd_ring - free receive ring
- * @vptr: velocity to clean up
- *
- * Free the receive buffers for each ring slot and any
- * attached socket buffers that need to go away.
- */
-
-static void velocity_free_rd_ring(struct velocity_info *vptr)
-{
- int i;
-
- if (vptr->rx.info == NULL)
- return;
-
- for (i = 0; i < vptr->options.numrx; i++) {
- struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
- struct rx_desc *rd = vptr->rx.ring + i;
-
- memset(rd, 0, sizeof(*rd));
-
- if (!rd_info->skb)
- continue;
- pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
- PCI_DMA_FROMDEVICE);
- rd_info->skb_dma = 0;
-
- dev_kfree_skb(rd_info->skb);
- rd_info->skb = NULL;
- }
-
- kfree(vptr->rx.info);
- vptr->rx.info = NULL;
-}
-
-/**
- * velocity_init_td_ring - set up transmit ring
- * @vptr: velocity
- *
- * Set up the transmit ring and chain the ring pointers together.
- * Returns zero on success or a negative posix errno code for
- * failure.
- */
-
-static int velocity_init_td_ring(struct velocity_info *vptr)
-{
- dma_addr_t curr;
- int j;
-
- /* Init the TD ring entries */
- for (j = 0; j < vptr->tx.numq; j++) {
- curr = vptr->tx.pool_dma[j];
-
- vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
- sizeof(struct velocity_td_info),
- GFP_KERNEL);
- if (!vptr->tx.infos[j]) {
- while(--j >= 0)
- kfree(vptr->tx.infos[j]);
- return -ENOMEM;
- }
-
- vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
- }
- return 0;
-}
-
-/*
- * FIXME: could we merge this with velocity_free_tx_buf ?
- */
-
-static void velocity_free_td_ring_entry(struct velocity_info *vptr,
- int q, int n)
-{
- struct velocity_td_info * td_info = &(vptr->tx.infos[q][n]);
- int i;
-
- if (td_info == NULL)
- return;
-
- if (td_info->skb) {
- for (i = 0; i < td_info->nskb_dma; i++)
- {
- if (td_info->skb_dma[i]) {
- pci_unmap_single(vptr->pdev, td_info->skb_dma[i],
- td_info->skb->len, PCI_DMA_TODEVICE);
- td_info->skb_dma[i] = 0;
- }
- }
- dev_kfree_skb(td_info->skb);
- td_info->skb = NULL;
- }
-}
-
-/**
- * velocity_free_td_ring - free td ring
- * @vptr: velocity
- *
- * Free up the transmit ring for this particular velocity adapter.
- * We free the ring contents but not the ring itself.
- */
-
-static void velocity_free_td_ring(struct velocity_info *vptr)
-{
+ u16 crc = 0xFFFF;
+ u8 mask;
int i, j;
- for (j = 0; j < vptr->tx.numq; j++) {
- if (vptr->tx.infos[j] == NULL)
+ for (i = 0; i < size; i++) {
+ mask = mask_pattern[i];
+
+ /* Skip this loop if the mask equals to zero */
+ if (mask == 0x00)
continue;
- for (i = 0; i < vptr->options.numtx; i++) {
- velocity_free_td_ring_entry(vptr, j, i);
- }
- kfree(vptr->tx.infos[j]);
- vptr->tx.infos[j] = NULL;
- }
-}
-
-/**
- * velocity_rx_srv - service RX interrupt
- * @vptr: velocity
- * @status: adapter status (unused)
- *
- * Walk the receive ring of the velocity adapter and remove
- * any received packets from the receive queue. Hand the ring
- * slots back to the adapter for reuse.
- */
-
-static int velocity_rx_srv(struct velocity_info *vptr, int status)
-{
- struct net_device_stats *stats = &vptr->dev->stats;
- int rd_curr = vptr->rx.curr;
- int works = 0;
-
- do {
- struct rx_desc *rd = vptr->rx.ring + rd_curr;
-
- if (!vptr->rx.info[rd_curr].skb)
- break;
-
- if (rd->rdesc0.len & OWNED_BY_NIC)
- break;
-
- rmb();
-
- /*
- * Don't drop CE or RL error frame although RXOK is off
- */
- if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
- if (velocity_receive_frame(vptr, rd_curr) < 0)
- stats->rx_dropped++;
- } else {
- if (rd->rdesc0.RSR & RSR_CRC)
- stats->rx_crc_errors++;
- if (rd->rdesc0.RSR & RSR_FAE)
- stats->rx_frame_errors++;
-
- stats->rx_dropped++;
- }
-
- rd->size |= RX_INTEN;
-
- rd_curr++;
- if (rd_curr >= vptr->options.numrx)
- rd_curr = 0;
- } while (++works <= 15);
-
- vptr->rx.curr = rd_curr;
-
- if ((works > 0) && (velocity_rx_refill(vptr) > 0))
- velocity_give_many_rx_descs(vptr);
-
- VAR_USED(stats);
- return works;
-}
-
-/**
- * velocity_rx_csum - checksum process
- * @rd: receive packet descriptor
- * @skb: network layer packet buffer
- *
- * Process the status bits for the received packet and determine
- * if the checksum was computed and verified by the hardware
- */
-
-static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
-{
- skb->ip_summed = CHECKSUM_NONE;
-
- if (rd->rdesc1.CSM & CSM_IPKT) {
- if (rd->rdesc1.CSM & CSM_IPOK) {
- if ((rd->rdesc1.CSM & CSM_TCPKT) ||
- (rd->rdesc1.CSM & CSM_UDPKT)) {
- if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
- return;
- }
+ for (j = 0; j < 8; j++) {
+ if ((mask & 0x01) == 0) {
+ mask >>= 1;
+ continue;
}
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ mask >>= 1;
+ crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
}
}
+ /* Finally, invert the result once to get the correct data */
+ crc = ~crc;
+ return bitrev32(crc) >> 16;
}
/**
- * velocity_rx_copy - in place Rx copy for small packets
- * @rx_skb: network layer packet buffer candidate
- * @pkt_size: received data size
- * @rd: receive packet descriptor
- * @dev: network device
+ * velocity_set_wol - set up for wake on lan
+ * @vptr: velocity to set WOL status on
*
- * Replace the current skb that is scheduled for Rx processing by a
- * shorter, immediatly allocated skb, if the received packet is small
- * enough. This function returns a negative value if the received
- * packet is too big or if memory is exhausted.
+ * Set a card up for wake on lan either by unicast or by
+ * ARP packet.
+ *
+ * FIXME: check static buffer is safe here
*/
-static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
- struct velocity_info *vptr)
+static int velocity_set_wol(struct velocity_info *vptr)
{
- int ret = -1;
- if (pkt_size < rx_copybreak) {
- struct sk_buff *new_skb;
-
- new_skb = netdev_alloc_skb(vptr->dev, pkt_size + 2);
- if (new_skb) {
- new_skb->ip_summed = rx_skb[0]->ip_summed;
- skb_reserve(new_skb, 2);
- skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
- *rx_skb = new_skb;
- ret = 0;
- }
-
- }
- return ret;
-}
-
-/**
- * velocity_iph_realign - IP header alignment
- * @vptr: velocity we are handling
- * @skb: network layer packet buffer
- * @pkt_size: received data size
- *
- * Align IP header on a 2 bytes boundary. This behavior can be
- * configured by the user.
- */
-static inline void velocity_iph_realign(struct velocity_info *vptr,
- struct sk_buff *skb, int pkt_size)
-{
- if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
- memmove(skb->data + 2, skb->data, pkt_size);
- skb_reserve(skb, 2);
- }
-}
-
-/**
- * velocity_receive_frame - received packet processor
- * @vptr: velocity we are handling
- * @idx: ring index
- *
- * A packet has arrived. We process the packet and if appropriate
- * pass the frame up the network stack
- */
-
-static int velocity_receive_frame(struct velocity_info *vptr, int idx)
-{
- void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
- struct net_device_stats *stats = &vptr->dev->stats;
- struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
- struct rx_desc *rd = &(vptr->rx.ring[idx]);
- int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
- struct sk_buff *skb;
-
- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
- stats->rx_length_errors++;
- return -EINVAL;
- }
-
- if (rd->rdesc0.RSR & RSR_MAR)
- stats->multicast++;
-
- skb = rd_info->skb;
-
- pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
- vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
-
- /*
- * Drop frame not meeting IEEE 802.3
- */
-
- if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
- if (rd->rdesc0.RSR & RSR_RL) {
- stats->rx_length_errors++;
- return -EINVAL;
- }
- }
-
- pci_action = pci_dma_sync_single_for_device;
-
- velocity_rx_csum(rd, skb);
-
- if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
- velocity_iph_realign(vptr, skb, pkt_len);
- pci_action = pci_unmap_single;
- rd_info->skb = NULL;
- }
-
- pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz,
- PCI_DMA_FROMDEVICE);
-
- skb_put(skb, pkt_len - 4);
- skb->protocol = eth_type_trans(skb, vptr->dev);
-
- if (vptr->vlgrp && (rd->rdesc0.RSR & RSR_DETAG)) {
- vlan_hwaccel_rx(skb, vptr->vlgrp,
- swab16(le16_to_cpu(rd->rdesc1.PQTAG)));
- } else
- netif_rx(skb);
-
- stats->rx_bytes += pkt_len;
-
- return 0;
-}
-
-/**
- * velocity_alloc_rx_buf - allocate aligned receive buffer
- * @vptr: velocity
- * @idx: ring index
- *
- * Allocate a new full sized buffer for the reception of a frame and
- * map it into PCI space for the hardware to use. The hardware
- * requires *64* byte alignment of the buffer which makes life
- * less fun than would be ideal.
- */
-
-static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
-{
- struct rx_desc *rd = &(vptr->rx.ring[idx]);
- struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
-
- rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64);
- if (rd_info->skb == NULL)
- return -ENOMEM;
-
- /*
- * Do the gymnastics to get the buffer head for data at
- * 64byte alignment.
- */
- skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
- rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
- vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
-
- /*
- * Fill in the descriptor to match
- */
-
- *((u32 *) & (rd->rdesc0)) = 0;
- rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
- rd->pa_low = cpu_to_le32(rd_info->skb_dma);
- rd->pa_high = 0;
- return 0;
-}
-
-/**
- * tx_srv - transmit interrupt service
- * @vptr; Velocity
- * @status:
- *
- * Scan the queues looking for transmitted packets that
- * we can complete and clean up. Update any statistics as
- * necessary/
- */
-
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
-{
- struct tx_desc *td;
- int qnum;
- int full = 0;
- int idx;
- int works = 0;
- struct velocity_td_info *tdinfo;
- struct net_device_stats *stats = &vptr->dev->stats;
-
- for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
- for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
- idx = (idx + 1) % vptr->options.numtx) {
-
- /*
- * Get Tx Descriptor
- */
- td = &(vptr->tx.rings[qnum][idx]);
- tdinfo = &(vptr->tx.infos[qnum][idx]);
-
- if (td->tdesc0.len & OWNED_BY_NIC)
- break;
-
- if ((works++ > 15))
- break;
-
- if (td->tdesc0.TSR & TSR0_TERR) {
- stats->tx_errors++;
- stats->tx_dropped++;
- if (td->tdesc0.TSR & TSR0_CDH)
- stats->tx_heartbeat_errors++;
- if (td->tdesc0.TSR & TSR0_CRS)
- stats->tx_carrier_errors++;
- if (td->tdesc0.TSR & TSR0_ABT)
- stats->tx_aborted_errors++;
- if (td->tdesc0.TSR & TSR0_OWC)
- stats->tx_window_errors++;
- } else {
- stats->tx_packets++;
- stats->tx_bytes += tdinfo->skb->len;
- }
- velocity_free_tx_buf(vptr, tdinfo);
- vptr->tx.used[qnum]--;
- }
- vptr->tx.tail[qnum] = idx;
-
- if (AVAIL_TD(vptr, qnum) < 1) {
- full = 1;
- }
- }
- /*
- * Look to see if we should kick the transmit network
- * layer for more work.
- */
- if (netif_queue_stopped(vptr->dev) && (full == 0)
- && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
- netif_wake_queue(vptr->dev);
- }
- return works;
-}
-
-/**
- * velocity_print_link_status - link status reporting
- * @vptr: velocity to report on
- *
- * Turn the link status of the velocity card into a kernel log
- * description of the new link state, detailing speed and duplex
- * status
- */
-
-static void velocity_print_link_status(struct velocity_info *vptr)
-{
-
- if (vptr->mii_status & VELOCITY_LINK_FAIL) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
- } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name);
-
- if (vptr->mii_status & VELOCITY_SPEED_1000)
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
- else if (vptr->mii_status & VELOCITY_SPEED_100)
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
- else
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
-
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
- else
- VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
- } else {
- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_100_HALF:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
- break;
- case SPD_DPX_100_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
- break;
- case SPD_DPX_10_HALF:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
- break;
- case SPD_DPX_10_FULL:
- VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
- break;
- default:
- break;
- }
- }
-}
-
-/**
- * velocity_error - handle error from controller
- * @vptr: velocity
- * @status: card status
- *
- * Process an error report from the hardware and attempt to recover
- * the card itself. At the moment we cannot recover from some
- * theoretically impossible errors but this could be fixed using
- * the pci_device_failed logic to bounce the hardware
- *
- */
-
-static void velocity_error(struct velocity_info *vptr, int status)
-{
-
- if (status & ISR_TXSTLI) {
- struct mac_regs __iomem * regs = vptr->mac_regs;
-
- printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0]));
- BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR);
- writew(TRDCSR_RUN, ®s->TDCSRClr);
- netif_stop_queue(vptr->dev);
-
- /* FIXME: port over the pci_device_failed code and use it
- here */
- }
-
- if (status & ISR_SRCI) {
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int linked;
-
- if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- vptr->mii_status = check_connection_type(regs);
-
- /*
- * If it is a 3119, disable frame bursting in
- * halfduplex mode and enable it in fullduplex
- * mode
- */
- if (vptr->rev_id < REV_ID_VT3216_A0) {
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
- else
- BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
- }
- /*
- * Only enable CD heart beat counter in 10HD mode
- */
- if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10)) {
- BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
- } else {
- BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
- }
- }
- /*
- * Get link status from PHYSR0
- */
- linked = readb(®s->PHYSR0) & PHYSR0_LINKGD;
-
- if (linked) {
- vptr->mii_status &= ~VELOCITY_LINK_FAIL;
- netif_carrier_on(vptr->dev);
- } else {
- vptr->mii_status |= VELOCITY_LINK_FAIL;
- netif_carrier_off(vptr->dev);
- }
-
- velocity_print_link_status(vptr);
- enable_flow_control_ability(vptr);
-
- /*
- * Re-enable auto-polling because SRCI will disable
- * auto-polling
- */
-
- enable_mii_autopoll(regs);
-
- if (vptr->mii_status & VELOCITY_LINK_FAIL)
- netif_stop_queue(vptr->dev);
- else
- netif_wake_queue(vptr->dev);
-
- };
- if (status & ISR_MIBFI)
- velocity_update_hw_mibs(vptr);
- if (status & ISR_LSTEI)
- mac_rx_queue_wake(vptr->mac_regs);
-}
-
-/**
- * velocity_free_tx_buf - free transmit buffer
- * @vptr: velocity
- * @tdinfo: buffer
- *
- * Release an transmit buffer. If the buffer was preallocated then
- * recycle it, if not then unmap the buffer.
- */
-
-static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo)
-{
- struct sk_buff *skb = tdinfo->skb;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ static u8 buf[256];
int i;
- int pktlen;
+
+ static u32 mask_pattern[2][4] = {
+ {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
+ {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
+ };
+
+ writew(0xFFFF, ®s->WOLCRClr);
+ writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet);
+ writew(WOLCR_MAGIC_EN, ®s->WOLCRSet);
/*
- * Don't unmap the pre-allocated tx_bufs
+ if (vptr->wol_opts & VELOCITY_WOL_PHY)
+ writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet);
*/
- if (tdinfo->skb_dma) {
- pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
- for (i = 0; i < tdinfo->nskb_dma; i++) {
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
- pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
-#else
- pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
-#endif
- tdinfo->skb_dma[i] = 0;
- }
- }
- dev_kfree_skb_irq(skb);
- tdinfo->skb = NULL;
-}
+ if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+ writew(WOLCR_UNICAST_EN, ®s->WOLCRSet);
-static int velocity_init_rings(struct velocity_info *vptr, int mtu)
-{
- int ret;
+ if (vptr->wol_opts & VELOCITY_WOL_ARP) {
+ struct arp_packet *arp = (struct arp_packet *) buf;
+ u16 crc;
+ memset(buf, 0, sizeof(struct arp_packet) + 7);
- velocity_set_rxbufsize(vptr, mtu);
+ for (i = 0; i < 4; i++)
+ writel(mask_pattern[0][i], ®s->ByteMask[0][i]);
- ret = velocity_init_dma_rings(vptr);
- if (ret < 0)
- goto out;
+ arp->type = htons(ETH_P_ARP);
+ arp->ar_op = htons(1);
- ret = velocity_init_rd_ring(vptr);
- if (ret < 0)
- goto err_free_dma_rings_0;
+ memcpy(arp->ar_tip, vptr->ip_addr, 4);
- ret = velocity_init_td_ring(vptr);
- if (ret < 0)
- goto err_free_rd_ring_1;
-out:
- return ret;
+ crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
+ (u8 *) & mask_pattern[0][0]);
-err_free_rd_ring_1:
- velocity_free_rd_ring(vptr);
-err_free_dma_rings_0:
- velocity_free_dma_rings(vptr);
- goto out;
-}
-
-static void velocity_free_rings(struct velocity_info *vptr)
-{
- velocity_free_td_ring(vptr);
- velocity_free_rd_ring(vptr);
- velocity_free_dma_rings(vptr);
-}
-
-/**
- * velocity_open - interface activation callback
- * @dev: network layer device to open
- *
- * Called when the network layer brings the interface up. Returns
- * a negative posix error code on failure, or zero on success.
- *
- * All the ring allocation and set up is done on open for this
- * adapter to minimise memory usage when inactive
- */
-
-static int velocity_open(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
- ret = velocity_init_rings(vptr, dev->mtu);
- if (ret < 0)
- goto out;
-
- /* Ensure chip is running */
- pci_set_power_state(vptr->pdev, PCI_D0);
-
- velocity_give_many_rx_descs(vptr);
-
- velocity_init_registers(vptr, VELOCITY_INIT_COLD);
-
- ret = request_irq(vptr->pdev->irq, &velocity_intr, IRQF_SHARED,
- dev->name, dev);
- if (ret < 0) {
- /* Power down the chip */
- pci_set_power_state(vptr->pdev, PCI_D3hot);
- velocity_free_rings(vptr);
- goto out;
+ writew(crc, ®s->PatternCRC[0]);
+ writew(WOLCR_ARP_EN, ®s->WOLCRSet);
}
- mac_enable_int(vptr->mac_regs);
- netif_start_queue(dev);
- vptr->flags |= VELOCITY_FLAGS_OPENED;
-out:
- return ret;
-}
+ BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet);
+ BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet);
-/**
- * velocity_change_mtu - MTU change callback
- * @dev: network device
- * @new_mtu: desired MTU
- *
- * Handle requests from the networking layer for MTU change on
- * this interface. It gets called on a change by the network layer.
- * Return zero for success or negative posix error code.
- */
+ writew(0x0FFF, ®s->WOLSRClr);
-static int velocity_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int ret = 0;
+ if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
- if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
- VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
- vptr->dev->name);
- ret = -EINVAL;
- goto out_0;
+ MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
}
- if (!netif_running(dev)) {
- dev->mtu = new_mtu;
- goto out_0;
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
+
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
+
+ {
+ u8 GCR;
+ GCR = readb(®s->CHIPGCR);
+ GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
+ writeb(GCR, ®s->CHIPGCR);
}
- if (dev->mtu != new_mtu) {
- struct velocity_info *tmp_vptr;
- unsigned long flags;
- struct rx_info rx;
- struct tx_info tx;
+ BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR);
+ /* Turn on SWPTAG just before entering power mode */
+ BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW);
+ /* Go to bed ..... */
+ BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
- tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
- if (!tmp_vptr) {
- ret = -ENOMEM;
- goto out_0;
- }
-
- tmp_vptr->dev = dev;
- tmp_vptr->pdev = vptr->pdev;
- tmp_vptr->options = vptr->options;
- tmp_vptr->tx.numq = vptr->tx.numq;
-
- ret = velocity_init_rings(tmp_vptr, new_mtu);
- if (ret < 0)
- goto out_free_tmp_vptr_1;
-
- spin_lock_irqsave(&vptr->lock, flags);
-
- netif_stop_queue(dev);
- velocity_shutdown(vptr);
-
- rx = vptr->rx;
- tx = vptr->tx;
-
- vptr->rx = tmp_vptr->rx;
- vptr->tx = tmp_vptr->tx;
-
- tmp_vptr->rx = rx;
- tmp_vptr->tx = tx;
-
- dev->mtu = new_mtu;
-
- velocity_give_many_rx_descs(vptr);
-
- velocity_init_registers(vptr, VELOCITY_INIT_COLD);
-
- mac_enable_int(vptr->mac_regs);
- netif_start_queue(dev);
-
- spin_unlock_irqrestore(&vptr->lock, flags);
-
- velocity_free_rings(tmp_vptr);
-
-out_free_tmp_vptr_1:
- kfree(tmp_vptr);
- }
-out_0:
- return ret;
-}
-
-/**
- * velocity_shutdown - shut down the chip
- * @vptr: velocity to deactivate
- *
- * Shuts down the internal operations of the velocity and
- * disables interrupts, autopolling, transmit and receive
- */
-
-static void velocity_shutdown(struct velocity_info *vptr)
-{
- struct mac_regs __iomem * regs = vptr->mac_regs;
- mac_disable_int(regs);
- writel(CR0_STOP, ®s->CR0Set);
- writew(0xFFFF, ®s->TDCSRClr);
- writeb(0xFF, ®s->RDCSRClr);
- safe_disable_mii_autopoll(regs);
- mac_clear_isr(regs);
-}
-
-/**
- * velocity_close - close adapter callback
- * @dev: network device
- *
- * Callback from the network layer when the velocity is being
- * deactivated by the network layer
- */
-
-static int velocity_close(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- netif_stop_queue(dev);
- velocity_shutdown(vptr);
-
- if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
- velocity_get_ip(vptr);
- if (dev->irq != 0)
- free_irq(dev->irq, dev);
-
- /* Power down the chip */
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-
- velocity_free_rings(vptr);
-
- vptr->flags &= (~VELOCITY_FLAGS_OPENED);
return 0;
}
/**
- * velocity_xmit - transmit packet callback
- * @skb: buffer to transmit
- * @dev: network device
+ * velocity_save_context - save registers
+ * @vptr: velocity
+ * @context: buffer for stored context
*
- * Called by the networ layer to request a packet is queued to
- * the velocity. Returns zero on success.
+ * Retrieve the current configuration from the velocity hardware
+ * and stash it in the context structure, for use by the context
+ * restore functions. This allows us to save things we need across
+ * power down states
*/
-
-static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
+static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u16 i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
+
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+ for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+}
+
+static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
struct velocity_info *vptr = netdev_priv(dev);
- int qnum = 0;
- struct tx_desc *td_ptr;
- struct velocity_td_info *tdinfo;
unsigned long flags;
- int pktlen;
- __le16 len;
- int index;
-
- if (skb_padto(skb, ETH_ZLEN))
- goto out;
- pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
-
- len = cpu_to_le16(pktlen);
-
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
- if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
- kfree_skb(skb);
+ if (!netif_running(vptr->dev))
return 0;
- }
-#endif
+
+ netif_device_detach(vptr->dev);
spin_lock_irqsave(&vptr->lock, flags);
-
- index = vptr->tx.curr[qnum];
- td_ptr = &(vptr->tx.rings[qnum][index]);
- tdinfo = &(vptr->tx.infos[qnum][index]);
-
- td_ptr->tdesc1.TCR = TCR0_TIC;
- td_ptr->td_buf[0].size &= ~TD_QUEUE;
-
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
- if (skb_shinfo(skb)->nr_frags > 0) {
- int nfrags = skb_shinfo(skb)->nr_frags;
- tdinfo->skb = skb;
- if (nfrags > 6) {
- skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
- td_ptr->tdesc0.len = len;
- td_ptr->tx.buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
- td_ptr->tx.buf[0].pa_high = 0;
- td_ptr->tx.buf[0].size = len; /* queue is 0 anyway */
- tdinfo->nskb_dma = 1;
- } else {
- int i = 0;
- tdinfo->nskb_dma = 0;
- tdinfo->skb_dma[i] = pci_map_single(vptr->pdev, skb->data,
- skb_headlen(skb), PCI_DMA_TODEVICE);
-
- td_ptr->tdesc0.len = len;
-
- /* FIXME: support 48bit DMA later */
- td_ptr->tx.buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
- td_ptr->tx.buf[i].pa_high = 0;
- td_ptr->tx.buf[i].size = cpu_to_le16(skb_headlen(skb));
-
- for (i = 0; i < nfrags; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- void *addr = (void *)page_address(frag->page) + frag->page_offset;
-
- tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
-
- td_ptr->tx.buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
- td_ptr->tx.buf[i + 1].pa_high = 0;
- td_ptr->tx.buf[i + 1].size = cpu_to_le16(frag->size);
- }
- tdinfo->nskb_dma = i - 1;
- }
-
- } else
+ pci_save_state(pdev);
+#ifdef ETHTOOL_GWOL
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
+ velocity_get_ip(vptr);
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ velocity_set_wol(vptr);
+ pci_enable_wake(pdev, PCI_D3hot, 1);
+ pci_set_power_state(pdev, PCI_D3hot);
+ } else {
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ }
+#else
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
#endif
- {
- /*
- * Map the linear network buffer into PCI space and
- * add it to the transmit ring.
- */
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
- td_ptr->tdesc0.len = len;
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
- td_ptr->td_buf[0].pa_high = 0;
- td_ptr->td_buf[0].size = len;
- tdinfo->nskb_dma = 1;
- }
- td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
-
- if (vptr->vlgrp && vlan_tx_tag_present(skb)) {
- td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb));
- td_ptr->tdesc1.TCR |= TCR0_VETAG;
- }
-
- /*
- * Handle hardware checksum
- */
- if ((vptr->flags & VELOCITY_FLAGS_TX_CSUM)
- && (skb->ip_summed == CHECKSUM_PARTIAL)) {
- const struct iphdr *ip = ip_hdr(skb);
- if (ip->protocol == IPPROTO_TCP)
- td_ptr->tdesc1.TCR |= TCR0_TCPCK;
- else if (ip->protocol == IPPROTO_UDP)
- td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
- td_ptr->tdesc1.TCR |= TCR0_IPCK;
- }
- {
-
- int prev = index - 1;
-
- if (prev < 0)
- prev = vptr->options.numtx - 1;
- td_ptr->tdesc0.len |= OWNED_BY_NIC;
- vptr->tx.used[qnum]++;
- vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
-
- if (AVAIL_TD(vptr, qnum) < 1)
- netif_stop_queue(dev);
-
- td_ptr = &(vptr->tx.rings[qnum][prev]);
- td_ptr->td_buf[0].size |= TD_QUEUE;
- mac_tx_queue_wake(vptr->mac_regs, qnum);
- }
- dev->trans_start = jiffies;
spin_unlock_irqrestore(&vptr->lock, flags);
-out:
- return NETDEV_TX_OK;
+ return 0;
}
/**
- * velocity_intr - interrupt callback
- * @irq: interrupt number
- * @dev_instance: interrupting device
+ * velocity_restore_context - restore registers
+ * @vptr: velocity
+ * @context: buffer for stored context
*
- * Called whenever an interrupt is generated by the velocity
- * adapter IRQ line. We may not be the source of the interrupt
- * and need to identify initially if we are, and if not exit as
- * efficiently as possible.
+ * Reload the register configuration from the velocity context
+ * created by velocity_save_context.
*/
-
-static irqreturn_t velocity_intr(int irq, void *dev_instance)
+static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
{
- struct net_device *dev = dev_instance;
- struct velocity_info *vptr = netdev_priv(dev);
- u32 isr_status;
- int max_count = 0;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
- /* Not us ? */
- if (isr_status == 0) {
- spin_unlock(&vptr->lock);
- return IRQ_NONE;
+ /* Just skip cr0 */
+ for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
+ /* Clear */
+ writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
+ /* Set */
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
}
+ for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+}
+
+static int velocity_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct velocity_info *vptr = netdev_priv(dev);
+ unsigned long flags;
+ int i;
+
+ if (!netif_running(vptr->dev))
+ return 0;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, 0, 0);
+ pci_restore_state(pdev);
+
+ mac_wol_reset(vptr->mac_regs);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ velocity_restore_context(vptr, &vptr->context);
+ velocity_init_registers(vptr, VELOCITY_INIT_WOL);
mac_disable_int(vptr->mac_regs);
- /*
- * Keep processing the ISR until we have completed
- * processing and the isr_status becomes zero
- */
+ velocity_tx_srv(vptr, 0);
- while (isr_status != 0) {
- mac_write_isr(vptr->mac_regs, isr_status);
- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
- velocity_error(vptr, isr_status);
- if (isr_status & (ISR_PRXI | ISR_PPRXI))
- max_count += velocity_rx_srv(vptr, isr_status);
- if (isr_status & (ISR_PTXI | ISR_PPTXI))
- max_count += velocity_tx_srv(vptr, isr_status);
- isr_status = mac_read_isr(vptr->mac_regs);
- if (max_count > vptr->options.int_works)
- {
- printk(KERN_WARNING "%s: excessive work at interrupt.\n",
- dev->name);
- max_count = 0;
- }
+ for (i = 0; i < vptr->tx.numq; i++) {
+ if (vptr->tx.used[i])
+ mac_tx_queue_wake(vptr->mac_regs, i);
}
- spin_unlock(&vptr->lock);
+
mac_enable_int(vptr->mac_regs);
- return IRQ_HANDLED;
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ netif_device_attach(vptr->dev);
+ return 0;
}
-
-
-/**
- * velocity_set_multi - filter list change callback
- * @dev: network device
- *
- * Called by the network layer when the filter lists need to change
- * for a velocity adapter. Reload the CAMs with the new address
- * filter ruleset.
- */
-
-static void velocity_set_multi(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem * regs = vptr->mac_regs;
- u8 rx_mode;
- int i;
- struct dev_mc_list *mclist;
-
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- writel(0xffffffff, ®s->MARCAM[0]);
- writel(0xffffffff, ®s->MARCAM[4]);
- rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
- } else if ((dev->mc_count > vptr->multicast_limit)
- || (dev->flags & IFF_ALLMULTI)) {
- writel(0xffffffff, ®s->MARCAM[0]);
- writel(0xffffffff, ®s->MARCAM[4]);
- rx_mode = (RCR_AM | RCR_AB);
- } else {
- int offset = MCAM_SIZE - vptr->multicast_limit;
- mac_get_cam_mask(regs, vptr->mCAMmask);
-
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
- mac_set_cam(regs, i + offset, mclist->dmi_addr);
- vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
- }
-
- mac_set_cam_mask(regs, vptr->mCAMmask);
- rx_mode = RCR_AM | RCR_AB | RCR_AP;
- }
- if (dev->mtu > 1500)
- rx_mode |= RCR_AL;
-
- BYTE_REG_BITS_ON(rx_mode, ®s->RCR);
-
-}
-
-/**
- * velocity_get_status - statistics callback
- * @dev: network device
- *
- * Callback from the network layer to allow driver statistics
- * to be resynchronized with hardware collected state. In the
- * case of the velocity we need to pull the MIB counters from
- * the hardware into the counters before letting the network
- * layer display them.
- */
-
-static struct net_device_stats *velocity_get_stats(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
-
- /* If the hardware is down, don't touch MII */
- if(!netif_running(dev))
- return &dev->stats;
-
- spin_lock_irq(&vptr->lock);
- velocity_update_hw_mibs(vptr);
- spin_unlock_irq(&vptr->lock);
-
- dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
- dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
- dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
-
-// unsigned long rx_dropped; /* no space in linux buffers */
- dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
- /* detailed rx_errors: */
-// unsigned long rx_length_errors;
-// unsigned long rx_over_errors; /* receiver ring buff overflow */
- dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
-// unsigned long rx_frame_errors; /* recv'd frame alignment error */
-// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
-// unsigned long rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
-// unsigned long tx_fifo_errors;
-
- return &dev->stats;
-}
-
-
-/**
- * velocity_ioctl - ioctl entry point
- * @dev: network device
- * @rq: interface request ioctl
- * @cmd: command code
- *
- * Called when the user issues an ioctl request to the network
- * device in question. The velocity interface supports MII.
- */
-
-static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
- /* If we are asked for information and the device is power
- saving then we need to bring the device back up to talk to it */
-
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D0);
-
- switch (cmd) {
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- case SIOCGMIIREG: /* Read MII PHY register. */
- case SIOCSMIIREG: /* Write to MII PHY register. */
- ret = velocity_mii_ioctl(dev, rq, cmd);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
- if (!netif_running(dev))
- pci_set_power_state(vptr->pdev, PCI_D3hot);
-
-
- return ret;
-}
+#endif
/*
* Definition for our device driver. The PCI layer interface
* uses this to handle all our card discover and plugging
*/
-
static struct pci_driver velocity_driver = {
.name = VELOCITY_NAME,
.id_table = velocity_id_table,
@@ -2407,582 +3070,6 @@
#endif
};
-/**
- * velocity_init_module - load time function
- *
- * Called when the velocity module is loaded. The PCI driver
- * is registered with the PCI layer, and in turn will call
- * the probe functions for each velocity adapter installed
- * in the system.
- */
-
-static int __init velocity_init_module(void)
-{
- int ret;
-
- velocity_register_notifier();
- ret = pci_register_driver(&velocity_driver);
- if (ret < 0)
- velocity_unregister_notifier();
- return ret;
-}
-
-/**
- * velocity_cleanup - module unload
- *
- * When the velocity hardware is unloaded this function is called.
- * It will clean up the notifiers and the unregister the PCI
- * driver interface for this hardware. This in turn cleans up
- * all discovered interfaces before returning from the function
- */
-
-static void __exit velocity_cleanup_module(void)
-{
- velocity_unregister_notifier();
- pci_unregister_driver(&velocity_driver);
-}
-
-module_init(velocity_init_module);
-module_exit(velocity_cleanup_module);
-
-
-/*
- * MII access , media link mode setting functions
- */
-
-
-/**
- * mii_init - set up MII
- * @vptr: velocity adapter
- * @mii_status: links tatus
- *
- * Set up the PHY for the current link state.
- */
-
-static void mii_init(struct velocity_info *vptr, u32 mii_status)
-{
- u16 BMCR;
-
- switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
- case PHYID_CICADA_CS8201:
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
- /*
- * Turn on ECHODIS bit in NWay-forced full mode and turn it
- * off it in NWay-forced half mode for NWay-forced v.s.
- * legacy-forced issue.
- */
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- /*
- * Turn on Link/Activity LED enable bit for CIS8201
- */
- MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
- break;
- case PHYID_VT3216_32BIT:
- case PHYID_VT3216_64BIT:
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
- /*
- * Turn on ECHODIS bit in NWay-forced full mode and turn it
- * off it in NWay-forced half mode for NWay-forced v.s.
- * legacy-forced issue
- */
- if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
- MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- else
- MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
- break;
-
- case PHYID_MARVELL_1000:
- case PHYID_MARVELL_1000S:
- /*
- * Assert CRS on Transmit
- */
- MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
- /*
- * Reset to hardware default
- */
- MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
- break;
- default:
- ;
- }
- velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
- if (BMCR & BMCR_ISO) {
- BMCR &= ~BMCR_ISO;
- velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
- }
-}
-
-/**
- * safe_disable_mii_autopoll - autopoll off
- * @regs: velocity registers
- *
- * Turn off the autopoll and wait for it to disable on the chip
- */
-
-static void safe_disable_mii_autopoll(struct mac_regs __iomem * regs)
-{
- u16 ww;
-
- /* turn off MAUTO */
- writeb(0, ®s->MIICR);
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- udelay(1);
- if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
- break;
- }
-}
-
-/**
- * enable_mii_autopoll - turn on autopolling
- * @regs: velocity registers
- *
- * Enable the MII link status autopoll feature on the Velocity
- * hardware. Wait for it to enable.
- */
-
-static void enable_mii_autopoll(struct mac_regs __iomem * regs)
-{
- int ii;
-
- writeb(0, &(regs->MIICR));
- writeb(MIIADR_SWMPL, ®s->MIIADR);
-
- for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
- udelay(1);
- if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
- break;
- }
-
- writeb(MIICR_MAUTO, ®s->MIICR);
-
- for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
- udelay(1);
- if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
- break;
- }
-
-}
-
-/**
- * velocity_mii_read - read MII data
- * @regs: velocity registers
- * @index: MII register index
- * @data: buffer for received data
- *
- * Perform a single read of an MII 16bit register. Returns zero
- * on success or -ETIMEDOUT if the PHY did not respond.
- */
-
-static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
-{
- u16 ww;
-
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
- safe_disable_mii_autopoll(regs);
-
- writeb(index, ®s->MIIADR);
-
- BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR);
-
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- if (!(readb(®s->MIICR) & MIICR_RCMD))
- break;
- }
-
- *data = readw(®s->MIIDATA);
-
- enable_mii_autopoll(regs);
- if (ww == W_MAX_TIMEOUT)
- return -ETIMEDOUT;
- return 0;
-}
-
-/**
- * velocity_mii_write - write MII data
- * @regs: velocity registers
- * @index: MII register index
- * @data: 16bit data for the MII register
- *
- * Perform a single write to an MII 16bit register. Returns zero
- * on success or -ETIMEDOUT if the PHY did not respond.
- */
-
-static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
-{
- u16 ww;
-
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
- safe_disable_mii_autopoll(regs);
-
- /* MII reg offset */
- writeb(mii_addr, ®s->MIIADR);
- /* set MII data */
- writew(data, ®s->MIIDATA);
-
- /* turn on MIICR_WCMD */
- BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR);
-
- /* W_MAX_TIMEOUT is the timeout period */
- for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
- udelay(5);
- if (!(readb(®s->MIICR) & MIICR_WCMD))
- break;
- }
- enable_mii_autopoll(regs);
-
- if (ww == W_MAX_TIMEOUT)
- return -ETIMEDOUT;
- return 0;
-}
-
-/**
- * velocity_get_opt_media_mode - get media selection
- * @vptr: velocity adapter
- *
- * Get the media mode stored in EEPROM or module options and load
- * mii_status accordingly. The requested link state information
- * is also returned.
- */
-
-static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
-{
- u32 status = 0;
-
- switch (vptr->options.spd_dpx) {
- case SPD_DPX_AUTO:
- status = VELOCITY_AUTONEG_ENABLE;
- break;
- case SPD_DPX_100_FULL:
- status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
- break;
- case SPD_DPX_10_FULL:
- status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
- break;
- case SPD_DPX_100_HALF:
- status = VELOCITY_SPEED_100;
- break;
- case SPD_DPX_10_HALF:
- status = VELOCITY_SPEED_10;
- break;
- }
- vptr->mii_status = status;
- return status;
-}
-
-/**
- * mii_set_auto_on - autonegotiate on
- * @vptr: velocity
- *
- * Enable autonegotation on this interface
- */
-
-static void mii_set_auto_on(struct velocity_info *vptr)
-{
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
- MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
- else
- MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
-}
-
-
-/*
-static void mii_set_auto_off(struct velocity_info * vptr)
-{
- MII_REG_BITS_OFF(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
-}
-*/
-
-/**
- * set_mii_flow_control - flow control setup
- * @vptr: velocity interface
- *
- * Set up the flow control on this interface according to
- * the supplied user/eeprom options.
- */
-
-static void set_mii_flow_control(struct velocity_info *vptr)
-{
- /*Enable or Disable PAUSE in ANAR */
- switch (vptr->options.flow_cntl) {
- case FLOW_CNTL_TX:
- MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
-
- case FLOW_CNTL_RX:
- MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
-
- case FLOW_CNTL_TX_RX:
- MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
-
- case FLOW_CNTL_DISABLE:
- MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
- break;
- default:
- break;
- }
-}
-
-/**
- * velocity_set_media_mode - set media mode
- * @mii_status: old MII link state
- *
- * Check the media link state and configure the flow control
- * PHY and also velocity hardware setup accordingly. In particular
- * we need to set up CD polling and frame bursting.
- */
-
-static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
-{
- u32 curr_status;
- struct mac_regs __iomem * regs = vptr->mac_regs;
-
- vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
- curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
-
- /* Set mii link status */
- set_mii_flow_control(vptr);
-
- /*
- Check if new status is consisent with current status
- if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
- || (mii_status==curr_status)) {
- vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
- vptr->mii_status=check_connection_type(vptr->mac_regs);
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
- return 0;
- }
- */
-
- if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) {
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
- }
-
- /*
- * If connection type is AUTO
- */
- if (mii_status & VELOCITY_AUTONEG_ENABLE) {
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
- /* clear force MAC mode bit */
- BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
- /* set duplex mode of MAC according to duplex mode of MII */
- MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
- MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
-
- /* enable AUTO-NEGO mode */
- mii_set_auto_on(vptr);
- } else {
- u16 ANAR;
- u8 CHIPGCR;
-
- /*
- * 1. if it's 3119, disable frame bursting in halfduplex mode
- * and enable it in fullduplex mode
- * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
- * 3. only enable CD heart beat counter in 10HD mode
- */
-
- /* set force MAC mode bit */
- BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
-
- CHIPGCR = readb(®s->CHIPGCR);
- CHIPGCR &= ~CHIPGCR_FCGMII;
-
- if (mii_status & VELOCITY_DUPLEX_FULL) {
- CHIPGCR |= CHIPGCR_FCFDX;
- writeb(CHIPGCR, ®s->CHIPGCR);
- VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
- if (vptr->rev_id < REV_ID_VT3216_A0)
- BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
- } else {
- CHIPGCR &= ~CHIPGCR_FCFDX;
- VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
- writeb(CHIPGCR, ®s->CHIPGCR);
- if (vptr->rev_id < REV_ID_VT3216_A0)
- BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
- }
-
- MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
-
- if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10)) {
- BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
- } else {
- BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
- }
- /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
- velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
- ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
- if (mii_status & VELOCITY_SPEED_100) {
- if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ANAR_TXFD;
- else
- ANAR |= ANAR_TX;
- } else {
- if (mii_status & VELOCITY_DUPLEX_FULL)
- ANAR |= ANAR_10FD;
- else
- ANAR |= ANAR_10;
- }
- velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
- /* enable AUTO-NEGO mode */
- mii_set_auto_on(vptr);
- /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
- }
- /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
- /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
- return VELOCITY_LINK_CHANGE;
-}
-
-/**
- * mii_check_media_mode - check media state
- * @regs: velocity registers
- *
- * Check the current MII status and determine the link status
- * accordingly
- */
-
-static u32 mii_check_media_mode(struct mac_regs __iomem * regs)
-{
- u32 status = 0;
- u16 ANAR;
-
- if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
- status |= VELOCITY_LINK_FAIL;
-
- if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
- status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
- else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
- status |= (VELOCITY_SPEED_1000);
- else {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if (ANAR & ANAR_TXFD)
- status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
- else if (ANAR & ANAR_TX)
- status |= VELOCITY_SPEED_100;
- else if (ANAR & ANAR_10FD)
- status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
- else
- status |= (VELOCITY_SPEED_10);
- }
-
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
- == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
- if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
- status |= VELOCITY_AUTONEG_ENABLE;
- }
- }
-
- return status;
-}
-
-static u32 check_connection_type(struct mac_regs __iomem * regs)
-{
- u32 status = 0;
- u8 PHYSR0;
- u16 ANAR;
- PHYSR0 = readb(®s->PHYSR0);
-
- /*
- if (!(PHYSR0 & PHYSR0_LINKGD))
- status|=VELOCITY_LINK_FAIL;
- */
-
- if (PHYSR0 & PHYSR0_FDPX)
- status |= VELOCITY_DUPLEX_FULL;
-
- if (PHYSR0 & PHYSR0_SPDG)
- status |= VELOCITY_SPEED_1000;
- else if (PHYSR0 & PHYSR0_SPD10)
- status |= VELOCITY_SPEED_10;
- else
- status |= VELOCITY_SPEED_100;
-
- if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
- velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
- if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
- == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
- if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
- status |= VELOCITY_AUTONEG_ENABLE;
- }
- }
-
- return status;
-}
-
-/**
- * enable_flow_control_ability - flow control
- * @vptr: veloity to configure
- *
- * Set up flow control according to the flow control options
- * determined by the eeprom/configuration.
- */
-
-static void enable_flow_control_ability(struct velocity_info *vptr)
-{
-
- struct mac_regs __iomem * regs = vptr->mac_regs;
-
- switch (vptr->options.flow_cntl) {
-
- case FLOW_CNTL_DEFAULT:
- if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0))
- writel(CR0_FDXRFCEN, ®s->CR0Set);
- else
- writel(CR0_FDXRFCEN, ®s->CR0Clr);
-
- if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0))
- writel(CR0_FDXTFCEN, ®s->CR0Set);
- else
- writel(CR0_FDXTFCEN, ®s->CR0Clr);
- break;
-
- case FLOW_CNTL_TX:
- writel(CR0_FDXTFCEN, ®s->CR0Set);
- writel(CR0_FDXRFCEN, ®s->CR0Clr);
- break;
-
- case FLOW_CNTL_RX:
- writel(CR0_FDXRFCEN, ®s->CR0Set);
- writel(CR0_FDXTFCEN, ®s->CR0Clr);
- break;
-
- case FLOW_CNTL_TX_RX:
- writel(CR0_FDXTFCEN, ®s->CR0Set);
- writel(CR0_FDXRFCEN, ®s->CR0Set);
- break;
-
- case FLOW_CNTL_DISABLE:
- writel(CR0_FDXRFCEN, ®s->CR0Clr);
- writel(CR0_FDXTFCEN, ®s->CR0Clr);
- break;
-
- default:
- break;
- }
-
-}
-
/**
* velocity_ethtool_up - pre hook for ethtool
@@ -2991,7 +3078,6 @@
* Called before an ethtool operation. We need to make sure the
* chip is out of D3 state before we poke at it.
*/
-
static int velocity_ethtool_up(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -3007,7 +3093,6 @@
* Called after an ethtool operation. Restore the chip back to D3
* state if it isn't running.
*/
-
static void velocity_ethtool_down(struct net_device *dev)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -3018,7 +3103,7 @@
static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem * regs = vptr->mac_regs;
+ struct mac_regs __iomem *regs = vptr->mac_regs;
u32 status;
status = check_connection_type(vptr->mac_regs);
@@ -3072,13 +3157,6 @@
return ret;
}
-static u32 velocity_get_link(struct net_device *dev)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem * regs = vptr->mac_regs;
- return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0;
-}
-
static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct velocity_info *vptr = netdev_priv(dev);
@@ -3157,317 +3235,8 @@
.complete = velocity_ethtool_down
};
-/**
- * velocity_mii_ioctl - MII ioctl handler
- * @dev: network device
- * @ifr: the ifreq block for the ioctl
- * @cmd: the command
- *
- * Process MII requests made via ioctl from the network layer. These
- * are used by tools like kudzu to interrogate the link state of the
- * hardware
- */
-
-static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct velocity_info *vptr = netdev_priv(dev);
- struct mac_regs __iomem * regs = vptr->mac_regs;
- unsigned long flags;
- struct mii_ioctl_data *miidata = if_mii(ifr);
- int err;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- miidata->phy_id = readb(®s->MIIADR) & 0x1f;
- break;
- case SIOCGMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- if(velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
- return -ETIMEDOUT;
- break;
- case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- spin_lock_irqsave(&vptr->lock, flags);
- err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
- spin_unlock_irqrestore(&vptr->lock, flags);
- check_connection_type(vptr->mac_regs);
- if(err)
- return err;
- break;
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
#ifdef CONFIG_PM
-
-/**
- * velocity_save_context - save registers
- * @vptr: velocity
- * @context: buffer for stored context
- *
- * Retrieve the current configuration from the velocity hardware
- * and stash it in the context structure, for use by the context
- * restore functions. This allows us to save things we need across
- * power down states
- */
-
-static void velocity_save_context(struct velocity_info *vptr, struct velocity_context * context)
-{
- struct mac_regs __iomem * regs = vptr->mac_regs;
- u16 i;
- u8 __iomem *ptr = (u8 __iomem *)regs;
-
- for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
- for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
- for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
- *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
-
-}
-
-/**
- * velocity_restore_context - restore registers
- * @vptr: velocity
- * @context: buffer for stored context
- *
- * Reload the register configuration from the velocity context
- * created by velocity_save_context.
- */
-
-static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
-{
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i;
- u8 __iomem *ptr = (u8 __iomem *)regs;
-
- for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4) {
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- }
-
- /* Just skip cr0 */
- for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
- /* Clear */
- writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
- /* Set */
- writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
- }
-
- for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4) {
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- }
-
- for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) {
- writel(*((u32 *) (context->mac_reg + i)), ptr + i);
- }
-
- for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++) {
- writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
- }
-
-}
-
-/**
- * wol_calc_crc - WOL CRC
- * @pattern: data pattern
- * @mask_pattern: mask
- *
- * Compute the wake on lan crc hashes for the packet header
- * we are interested in.
- */
-
-static u16 wol_calc_crc(int size, u8 * pattern, u8 *mask_pattern)
-{
- u16 crc = 0xFFFF;
- u8 mask;
- int i, j;
-
- for (i = 0; i < size; i++) {
- mask = mask_pattern[i];
-
- /* Skip this loop if the mask equals to zero */
- if (mask == 0x00)
- continue;
-
- for (j = 0; j < 8; j++) {
- if ((mask & 0x01) == 0) {
- mask >>= 1;
- continue;
- }
- mask >>= 1;
- crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
- }
- }
- /* Finally, invert the result once to get the correct data */
- crc = ~crc;
- return bitrev32(crc) >> 16;
-}
-
-/**
- * velocity_set_wol - set up for wake on lan
- * @vptr: velocity to set WOL status on
- *
- * Set a card up for wake on lan either by unicast or by
- * ARP packet.
- *
- * FIXME: check static buffer is safe here
- */
-
-static int velocity_set_wol(struct velocity_info *vptr)
-{
- struct mac_regs __iomem * regs = vptr->mac_regs;
- static u8 buf[256];
- int i;
-
- static u32 mask_pattern[2][4] = {
- {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
- {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
- };
-
- writew(0xFFFF, ®s->WOLCRClr);
- writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet);
- writew(WOLCR_MAGIC_EN, ®s->WOLCRSet);
-
- /*
- if (vptr->wol_opts & VELOCITY_WOL_PHY)
- writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet);
- */
-
- if (vptr->wol_opts & VELOCITY_WOL_UCAST) {
- writew(WOLCR_UNICAST_EN, ®s->WOLCRSet);
- }
-
- if (vptr->wol_opts & VELOCITY_WOL_ARP) {
- struct arp_packet *arp = (struct arp_packet *) buf;
- u16 crc;
- memset(buf, 0, sizeof(struct arp_packet) + 7);
-
- for (i = 0; i < 4; i++)
- writel(mask_pattern[0][i], ®s->ByteMask[0][i]);
-
- arp->type = htons(ETH_P_ARP);
- arp->ar_op = htons(1);
-
- memcpy(arp->ar_tip, vptr->ip_addr, 4);
-
- crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
- (u8 *) & mask_pattern[0][0]);
-
- writew(crc, ®s->PatternCRC[0]);
- writew(WOLCR_ARP_EN, ®s->WOLCRSet);
- }
-
- BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet);
- BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet);
-
- writew(0x0FFF, ®s->WOLSRClr);
-
- if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
- if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
- MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
-
- MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
- }
-
- if (vptr->mii_status & VELOCITY_SPEED_1000)
- MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
-
- BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
-
- {
- u8 GCR;
- GCR = readb(®s->CHIPGCR);
- GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
- writeb(GCR, ®s->CHIPGCR);
- }
-
- BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR);
- /* Turn on SWPTAG just before entering power mode */
- BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW);
- /* Go to bed ..... */
- BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
-
- return 0;
-}
-
-static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
- unsigned long flags;
-
- if(!netif_running(vptr->dev))
- return 0;
-
- netif_device_detach(vptr->dev);
-
- spin_lock_irqsave(&vptr->lock, flags);
- pci_save_state(pdev);
-#ifdef ETHTOOL_GWOL
- if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
- velocity_get_ip(vptr);
- velocity_save_context(vptr, &vptr->context);
- velocity_shutdown(vptr);
- velocity_set_wol(vptr);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_set_power_state(pdev, PCI_D3hot);
- } else {
- velocity_save_context(vptr, &vptr->context);
- velocity_shutdown(vptr);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- }
-#else
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-#endif
- spin_unlock_irqrestore(&vptr->lock, flags);
- return 0;
-}
-
-static int velocity_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct velocity_info *vptr = netdev_priv(dev);
- unsigned long flags;
- int i;
-
- if(!netif_running(vptr->dev))
- return 0;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, 0, 0);
- pci_restore_state(pdev);
-
- mac_wol_reset(vptr->mac_regs);
-
- spin_lock_irqsave(&vptr->lock, flags);
- velocity_restore_context(vptr, &vptr->context);
- velocity_init_registers(vptr, VELOCITY_INIT_WOL);
- mac_disable_int(vptr->mac_regs);
-
- velocity_tx_srv(vptr, 0);
-
- for (i = 0; i < vptr->tx.numq; i++) {
- if (vptr->tx.used[i]) {
- mac_tx_queue_wake(vptr->mac_regs, i);
- }
- }
-
- mac_enable_int(vptr->mac_regs);
- spin_unlock_irqrestore(&vptr->lock, flags);
- netif_device_attach(vptr->dev);
-
- return 0;
-}
-
#ifdef CONFIG_INET
-
static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
{
struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
@@ -3489,6 +3258,63 @@
return NOTIFY_DONE;
}
+#endif /* CONFIG_INET */
+#endif /* CONFIG_PM */
-#endif
-#endif
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
+static struct notifier_block velocity_inetaddr_notifier = {
+ .notifier_call = velocity_netdev_event,
+};
+
+static void velocity_register_notifier(void)
+{
+ register_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+static void velocity_unregister_notifier(void)
+{
+ unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+#else
+
+#define velocity_register_notifier() do {} while (0)
+#define velocity_unregister_notifier() do {} while (0)
+
+#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */
+
+/**
+ * velocity_init_module - load time function
+ *
+ * Called when the velocity module is loaded. The PCI driver
+ * is registered with the PCI layer, and in turn will call
+ * the probe functions for each velocity adapter installed
+ * in the system.
+ */
+static int __init velocity_init_module(void)
+{
+ int ret;
+
+ velocity_register_notifier();
+ ret = pci_register_driver(&velocity_driver);
+ if (ret < 0)
+ velocity_unregister_notifier();
+ return ret;
+}
+
+/**
+ * velocity_cleanup - module unload
+ *
+ * When the velocity hardware is unloaded this function is called.
+ * It will clean up the notifiers and the unregister the PCI
+ * driver interface for this hardware. This in turn cleans up
+ * all discovered interfaces before returning from the function
+ */
+static void __exit velocity_cleanup_module(void)
+{
+ velocity_unregister_notifier();
+ pci_unregister_driver(&velocity_driver);
+}
+
+module_init(velocity_init_module);
+module_exit(velocity_cleanup_module);
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 4cd3f6c..2f00c13 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -96,8 +96,8 @@
* Bits in the CSM register
*/
-#define CSM_IPOK 0x40 //IP Checkusm validatiaon ok
-#define CSM_TUPOK 0x20 //TCP/UDP Checkusm validatiaon ok
+#define CSM_IPOK 0x40 //IP Checksum validation ok
+#define CSM_TUPOK 0x20 //TCP/UDP Checksum validation ok
#define CSM_FRAG 0x10 //Fragment IP datagram
#define CSM_IPKT 0x04 //Received an IP packet
#define CSM_TCPKT 0x02 //Received a TCP packet
@@ -819,7 +819,7 @@
* Bits in the EECSR register
*/
-#define EECSR_EMBP 0x40 /* eeprom embeded programming */
+#define EECSR_EMBP 0x40 /* eeprom embedded programming */
#define EECSR_RELOAD 0x20 /* eeprom content reload */
#define EECSR_DPM 0x10 /* eeprom direct programming */
#define EECSR_ECS 0x08 /* eeprom CS pin */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 2a6e81d..32266fb 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -70,6 +70,9 @@
struct sk_buff_head recv;
struct sk_buff_head send;
+ /* Work struct for refilling if we run low on memory. */
+ struct delayed_work refill;
+
/* Chain pages by the private ptr. */
struct page *pages;
};
@@ -273,19 +276,22 @@
dev_kfree_skb(skb);
}
-static void try_fill_recv_maxbufs(struct virtnet_info *vi)
+static bool try_fill_recv_maxbufs(struct virtnet_info *vi, gfp_t gfp)
{
struct sk_buff *skb;
struct scatterlist sg[2+MAX_SKB_FRAGS];
int num, err, i;
+ bool oom = false;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
for (;;) {
struct virtio_net_hdr *hdr;
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
+ oom = true;
break;
+ }
skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, MAX_PACKET_LEN);
@@ -296,7 +302,7 @@
if (vi->big_packets) {
for (i = 0; i < MAX_SKB_FRAGS; i++) {
skb_frag_t *f = &skb_shinfo(skb)->frags[i];
- f->page = get_a_page(vi, GFP_ATOMIC);
+ f->page = get_a_page(vi, gfp);
if (!f->page)
break;
@@ -325,31 +331,35 @@
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
+ return !oom;
}
-static void try_fill_recv(struct virtnet_info *vi)
+/* Returns false if we couldn't fill entirely (OOM). */
+static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp)
{
struct sk_buff *skb;
struct scatterlist sg[1];
int err;
+ bool oom = false;
- if (!vi->mergeable_rx_bufs) {
- try_fill_recv_maxbufs(vi);
- return;
- }
+ if (!vi->mergeable_rx_bufs)
+ return try_fill_recv_maxbufs(vi, gfp);
for (;;) {
skb_frag_t *f;
skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
+ oom = true;
break;
+ }
skb_reserve(skb, NET_IP_ALIGN);
f = &skb_shinfo(skb)->frags[0];
- f->page = get_a_page(vi, GFP_ATOMIC);
+ f->page = get_a_page(vi, gfp);
if (!f->page) {
+ oom = true;
kfree_skb(skb);
break;
}
@@ -373,6 +383,7 @@
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
+ return !oom;
}
static void skb_recv_done(struct virtqueue *rvq)
@@ -385,6 +396,23 @@
}
}
+static void refill_work(struct work_struct *work)
+{
+ struct virtnet_info *vi;
+ bool still_empty;
+
+ vi = container_of(work, struct virtnet_info, refill.work);
+ napi_disable(&vi->napi);
+ try_fill_recv(vi, GFP_KERNEL);
+ still_empty = (vi->num == 0);
+ napi_enable(&vi->napi);
+
+ /* In theory, this can happen: if we don't get any buffers in
+ * we will *never* try to fill again. */
+ if (still_empty)
+ schedule_delayed_work(&vi->refill, HZ/2);
+}
+
static int virtnet_poll(struct napi_struct *napi, int budget)
{
struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi);
@@ -400,10 +428,10 @@
received++;
}
- /* FIXME: If we oom and completely run out of inbufs, we need
- * to start a timer trying to fill more. */
- if (vi->num < vi->max / 2)
- try_fill_recv(vi);
+ if (vi->num < vi->max / 2) {
+ if (!try_fill_recv(vi, GFP_ATOMIC))
+ schedule_delayed_work(&vi->refill, 0);
+ }
/* Out of packets? */
if (received < budget) {
@@ -519,7 +547,7 @@
netif_tx_unlock_bh(vi->dev);
}
-static int start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -770,10 +798,11 @@
dev_warn(&dev->dev, "Failed to kill VLAN ID %d.\n", vid);
}
-static struct ethtool_ops virtnet_ethtool_ops = {
+static const struct ethtool_ops virtnet_ethtool_ops = {
.set_tx_csum = virtnet_set_tx_csum,
.set_sg = ethtool_op_set_sg,
.set_tso = ethtool_op_set_tso,
+ .set_ufo = ethtool_op_set_ufo,
.get_link = ethtool_op_get_link,
};
@@ -893,6 +922,7 @@
vi->vdev = vdev;
vdev->priv = vi;
vi->pages = NULL;
+ INIT_DELAYED_WORK(&vi->refill, refill_work);
/* If they give us a callback when all buffers are done, we don't need
* the timer. */
@@ -941,7 +971,7 @@
}
/* Last of all, set up some receive buffers. */
- try_fill_recv(vi);
+ try_fill_recv(vi, GFP_KERNEL);
/* If we didn't even get one input buffer, we're useless. */
if (vi->num == 0) {
@@ -958,6 +988,7 @@
unregister:
unregister_netdev(dev);
+ cancel_delayed_work_sync(&vi->refill);
free_vqs:
vdev->config->del_vqs(vdev);
free:
@@ -986,6 +1017,7 @@
BUG_ON(vi->num != 0);
unregister_netdev(vi->dev);
+ cancel_delayed_work_sync(&vi->refill);
vdev->config->del_vqs(vi->vdev);
@@ -1005,7 +1037,7 @@
VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
- VIRTIO_NET_F_GUEST_ECN, /* We don't yet handle UFO input. */
+ VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_F_NOTIFY_ON_EMPTY,
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 58d2551..9e94c4b 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -313,14 +313,6 @@
hldev->kdfc = (u8 __iomem *)(hldev->bar0 +
VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
break;
- case 2:
- hldev->kdfc = (u8 __iomem *)(hldev->bar1 +
- VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
- break;
- case 4:
- hldev->kdfc = (u8 __iomem *)(hldev->bar2 +
- VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
- break;
default:
break;
}
@@ -831,8 +823,6 @@
sizeof(struct vxge_hw_device_config));
hldev->bar0 = attr->bar0;
- hldev->bar1 = attr->bar1;
- hldev->bar2 = attr->bar2;
hldev->pdev = attr->pdev;
hldev->uld_callbacks.link_up = attr->uld_callbacks.link_up;
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index afbdf6f..62779a5 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -682,8 +682,6 @@
* @major_revision: PCI Device major revision
* @minor_revision: PCI Device minor revision
* @bar0: BAR0 virtual address.
- * @bar1: BAR1 virtual address.
- * @bar2: BAR2 virtual address.
* @pdev: Physical device handle
* @config: Confguration passed by the LL driver at initialization
* @link_state: Link state
@@ -698,8 +696,6 @@
u8 major_revision;
u8 minor_revision;
void __iomem *bar0;
- void __iomem *bar1;
- void __iomem *bar2;
struct pci_dev *pdev;
struct net_device *ndev;
struct vxge_hw_device_config config;
@@ -788,17 +784,13 @@
/**
* struct vxge_hw_device_attr - Device memory spaces.
* @bar0: BAR0 virtual address.
- * @bar1: BAR1 virtual address.
- * @bar2: BAR2 virtual address.
* @pdev: PCI device object.
*
- * Device memory spaces. Includes configuration, BAR0, BAR1, etc. per device
+ * Device memory spaces. Includes configuration, BAR0 etc. per device
* mapped memories. Also, includes a pointer to OS-specific PCI device object.
*/
struct vxge_hw_device_attr {
void __iomem *bar0;
- void __iomem *bar1;
- void __iomem *bar2;
struct pci_dev *pdev;
struct vxge_hw_uld_cbs uld_callbacks;
};
@@ -986,7 +978,9 @@
void *txdlh,
enum vxge_hw_fifo_tcode t_code,
void *userdata,
- void **skb_ptr);
+ struct sk_buff ***skb_ptr,
+ int nr_skb,
+ int *more);
void (*txdl_term)(
void *txdlh,
@@ -1787,7 +1781,8 @@
void *txdlh,
enum vxge_hw_fifo_tcode t_code,
void *userdata,
- void **skb_ptr);
+ struct sk_buff ***skb_ptr,
+ int nr_skb, int *more);
void (*txdl_term)(
void *txdlh,
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 6034497..b378037 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -87,22 +87,25 @@
static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo)
{
unsigned long flags = 0;
- struct sk_buff *skb_ptr = NULL;
- struct sk_buff **temp, *head, *skb;
+ struct sk_buff **skb_ptr = NULL;
+ struct sk_buff **temp;
+#define NR_SKB_COMPLETED 128
+ struct sk_buff *completed[NR_SKB_COMPLETED];
+ int more;
- if (spin_trylock_irqsave(&fifo->tx_lock, flags)) {
- vxge_hw_vpath_poll_tx(fifo->handle, (void **)&skb_ptr);
- spin_unlock_irqrestore(&fifo->tx_lock, flags);
- }
- /* free SKBs */
- head = skb_ptr;
- while (head) {
- skb = head;
- temp = (struct sk_buff **)&skb->cb;
- head = *temp;
- *temp = NULL;
- dev_kfree_skb_irq(skb);
- }
+ do {
+ more = 0;
+ skb_ptr = completed;
+
+ if (spin_trylock_irqsave(&fifo->tx_lock, flags)) {
+ vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr,
+ NR_SKB_COMPLETED, &more);
+ spin_unlock_irqrestore(&fifo->tx_lock, flags);
+ }
+ /* free SKBs */
+ for (temp = completed; temp != skb_ptr; temp++)
+ dev_kfree_skb_irq(*temp);
+ } while (more) ;
}
static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev)
@@ -283,6 +286,7 @@
skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
rx_priv->skb = skb;
+ rx_priv->skb_data = NULL;
rx_priv->data_size = skb_size;
vxge_debug_entryexit(VXGE_TRACE,
"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
@@ -302,7 +306,8 @@
ring->ndev->name, __func__, __LINE__);
rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
- dma_addr = pci_map_single(ring->pdev, rx_priv->skb->data,
+ rx_priv->skb_data = rx_priv->skb->data;
+ dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data,
rx_priv->data_size, PCI_DMA_FROMDEVICE);
if (dma_addr == 0) {
@@ -374,10 +379,10 @@
if (ring->vlgrp && ext_info->vlan &&
(ring->vlan_tag_strip ==
VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
- vlan_gro_receive(&ring->napi, ring->vlgrp,
+ vlan_gro_receive(ring->napi_p, ring->vlgrp,
ext_info->vlan, skb);
else
- napi_gro_receive(&ring->napi, skb);
+ napi_gro_receive(ring->napi_p, skb);
} else {
if (ring->vlgrp && vlan &&
(ring->vlan_tag_strip ==
@@ -442,10 +447,12 @@
vxge_hw_ring_replenish(ringh, 0);
do {
+ prefetch((char *)dtr + L1_CACHE_BYTES);
rx_priv = vxge_hw_ring_rxd_private_get(dtr);
skb = rx_priv->skb;
data_size = rx_priv->data_size;
data_dma = rx_priv->data_dma;
+ prefetch(rx_priv->skb_data);
vxge_debug_rx(VXGE_TRACE,
"%s: %s:%d skb = 0x%p",
@@ -454,6 +461,8 @@
vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes);
pkt_length = dma_sizes;
+ pkt_length -= ETH_FCS_LEN;
+
vxge_debug_rx(VXGE_TRACE,
"%s: %s:%d Packet Length = %d",
ring->ndev->name, __func__, __LINE__, pkt_length);
@@ -579,8 +588,6 @@
if (first_dtr)
vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr);
- dev->last_rx = jiffies;
-
vxge_debug_entryexit(VXGE_TRACE,
"%s:%d Exiting...",
__func__, __LINE__);
@@ -598,11 +605,10 @@
enum vxge_hw_status
vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
enum vxge_hw_fifo_tcode t_code, void *userdata,
- void **skb_ptr)
+ struct sk_buff ***skb_ptr, int nr_skb, int *more)
{
struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
- struct sk_buff *skb, *head = NULL;
- struct sk_buff **temp;
+ struct sk_buff *skb, **done_skb = *skb_ptr;
int pkt_cnt = 0;
vxge_debug_entryexit(VXGE_TRACE,
@@ -655,9 +661,12 @@
fifo->stats.tx_frms++;
fifo->stats.tx_bytes += skb->len;
- temp = (struct sk_buff **)&skb->cb;
- *temp = head;
- head = skb;
+ *done_skb++ = skb;
+
+ if (--nr_skb <= 0) {
+ *more = 1;
+ break;
+ }
pkt_cnt++;
if (pkt_cnt > fifo->indicate_max_pkts)
@@ -666,11 +675,9 @@
} while (vxge_hw_fifo_txdl_next_completed(fifo_hw,
&dtr, &t_code) == VXGE_HW_OK);
+ *skb_ptr = done_skb;
vxge_wake_tx_queue(fifo, skb);
- if (skb_ptr)
- *skb_ptr = (void *) head;
-
vxge_debug_entryexit(VXGE_TRACE,
"%s: %s:%d Exiting...",
fifo->ndev->name, __func__, __LINE__);
@@ -803,7 +810,7 @@
* NOTE: when device cant queue the pkt, just the trans_start variable will
* not be upadted.
*/
-static int
+static netdev_tx_t
vxge_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct vxge_fifo *fifo = NULL;
@@ -817,7 +824,6 @@
u64 dma_pointer;
struct vxge_tx_priv *txdl_priv = NULL;
struct __vxge_hw_fifo *fifo_hw;
- u32 max_mss = 0x0;
int offload_type;
unsigned long flags = 0;
int vpath_no = 0;
@@ -894,6 +900,12 @@
goto _exit2;
}
+ /* Last TXD? Stop tx queue to avoid dropping packets. TX
+ * completion will resume the queue.
+ */
+ if (avail == 1)
+ vxge_stop_tx_queue(fifo);
+
status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv);
if (unlikely(status != VXGE_HW_OK)) {
vxge_debug_tx(VXGE_ERR,
@@ -969,10 +981,6 @@
int mss = vxge_tcp_mss(skb);
if (mss) {
- max_mss = dev->mtu + ETH_HLEN -
- VXGE_HW_TCPIP_HEADER_MAX_SIZE;
- if (mss > max_mss)
- mss = max_mss;
vxge_debug_tx(VXGE_TRACE,
"%s: %s:%d mss = %d",
dev->name, __func__, __LINE__, mss);
@@ -1000,7 +1008,7 @@
VXGE_COMPLETE_VPATH_TX(fifo);
vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...",
dev->name, __func__, __LINE__);
- return 0;
+ return NETDEV_TX_OK;
_exit0:
vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name);
@@ -1024,7 +1032,7 @@
spin_unlock_irqrestore(&fifo->tx_lock, flags);
VXGE_COMPLETE_VPATH_TX(fifo);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -1049,6 +1057,7 @@
rx_priv->data_size, PCI_DMA_FROMDEVICE);
dev_kfree_skb(rx_priv->skb);
+ rx_priv->skb_data = NULL;
vxge_debug_entryexit(VXGE_TRACE,
"%s: %s:%d Exiting...",
@@ -2137,16 +2146,16 @@
*/
static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
{
- struct __vxge_hw_device *hldev = (struct __vxge_hw_device *)dev_id;
- struct vxgedev *vdev;
struct net_device *dev;
+ struct __vxge_hw_device *hldev;
u64 reason;
enum vxge_hw_status status;
+ struct vxgedev *vdev = (struct vxgedev *) dev_id;;
vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__);
- dev = hldev->ndev;
- vdev = netdev_priv(dev);
+ dev = vdev->ndev;
+ hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
if (pci_channel_offline(vdev->pdev))
return IRQ_NONE;
@@ -2417,15 +2426,13 @@
#endif
if (vdev->config.intr_type == INTA) {
synchronize_irq(vdev->pdev->irq);
- free_irq(vdev->pdev->irq, hldev);
+ free_irq(vdev->pdev->irq, vdev);
}
}
static int vxge_add_isr(struct vxgedev *vdev)
{
int ret = 0;
- struct __vxge_hw_device *hldev =
- (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
#ifdef CONFIG_PCI_MSI
int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
u64 function_mode = vdev->config.device_hw_info.function_mode;
@@ -2579,7 +2586,7 @@
if (vdev->config.intr_type == INTA) {
ret = request_irq((int) vdev->pdev->irq,
vxge_isr_napi,
- IRQF_SHARED, vdev->desc[0], hldev);
+ IRQF_SHARED, vdev->desc[0], vdev);
if (ret) {
vxge_debug_init(VXGE_ERR,
"%s %s-%d: ISR registration failed",
@@ -2712,11 +2719,15 @@
netif_napi_add(dev, &vdev->napi, vxge_poll_inta,
vdev->config.napi_weight);
napi_enable(&vdev->napi);
+ for (i = 0; i < vdev->no_of_vpath; i++)
+ vdev->vpaths[i].ring.napi_p = &vdev->napi;
} else {
for (i = 0; i < vdev->no_of_vpath; i++) {
netif_napi_add(dev, &vdev->vpaths[i].ring.napi,
vxge_poll_msix, vdev->config.napi_weight);
napi_enable(&vdev->vpaths[i].ring.napi);
+ vdev->vpaths[i].ring.napi_p =
+ &vdev->vpaths[i].ring.napi;
}
}
@@ -2890,6 +2901,9 @@
vdev = (struct vxgedev *)netdev_priv(dev);
hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
+ if (unlikely(!is_vxge_card_up(vdev)))
+ return 0;
+
/* If vxge_handle_crit_err task is executing,
* wait till it completes. */
while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
@@ -3954,6 +3968,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev)) {
/* Bring down the card, while avoiding PCI I/O */
do_vxge_close(netdev, 0);
@@ -4152,18 +4169,6 @@
attr.bar0,
(unsigned long long)pci_resource_start(pdev, 0));
- attr.bar1 = pci_ioremap_bar(pdev, 2);
- if (!attr.bar1) {
- vxge_debug_init(VXGE_ERR,
- "%s : cannot remap io memory bar2", __func__);
- ret = -ENODEV;
- goto _exit3;
- }
- vxge_debug_ll_config(VXGE_TRACE,
- "pci ioremap bar1: %p:0x%llx",
- attr.bar1,
- (unsigned long long)pci_resource_start(pdev, 2));
-
status = vxge_hw_device_hw_info_get(attr.bar0,
&ll_config.device_hw_info);
if (status != VXGE_HW_OK) {
@@ -4171,17 +4176,17 @@
"%s: Reading of hardware info failed."
"Please try upgrading the firmware.", VXGE_DRIVER_NAME);
ret = -EINVAL;
- goto _exit4;
+ goto _exit3;
}
if (ll_config.device_hw_info.fw_version.major !=
- VXGE_DRIVER_VERSION_MAJOR) {
+ VXGE_DRIVER_FW_VERSION_MAJOR) {
vxge_debug_init(VXGE_ERR,
- "FW Ver.(maj): %d not driver's expected version: %d",
- ll_config.device_hw_info.fw_version.major,
- VXGE_DRIVER_VERSION_MAJOR);
+ "%s: Incorrect firmware version."
+ "Please upgrade the firmware to version 1.x.x",
+ VXGE_DRIVER_NAME);
ret = -EINVAL;
- goto _exit4;
+ goto _exit3;
}
vpath_mask = ll_config.device_hw_info.vpath_mask;
@@ -4189,7 +4194,7 @@
vxge_debug_ll_config(VXGE_TRACE,
"%s: No vpaths available in device", VXGE_DRIVER_NAME);
ret = -EINVAL;
- goto _exit4;
+ goto _exit3;
}
vxge_debug_ll_config(VXGE_TRACE,
@@ -4222,7 +4227,7 @@
vxge_debug_ll_config(VXGE_ERR,
"%s: No more vpaths to configure", VXGE_DRIVER_NAME);
ret = 0;
- goto _exit4;
+ goto _exit3;
}
/* Setting driver callbacks */
@@ -4235,7 +4240,7 @@
vxge_debug_init(VXGE_ERR,
"Failed to initialize device (%d)", status);
ret = -EINVAL;
- goto _exit4;
+ goto _exit3;
}
vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
@@ -4260,7 +4265,7 @@
if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath,
&vdev)) {
ret = -EINVAL;
- goto _exit5;
+ goto _exit4;
}
vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL);
@@ -4271,7 +4276,6 @@
hldev->ndev = vdev->ndev;
vdev->mtu = VXGE_HW_DEFAULT_MTU;
vdev->bar0 = attr.bar0;
- vdev->bar1 = attr.bar1;
vdev->max_vpath_supported = max_vpath_supported;
vdev->no_of_vpath = no_of_vpath;
@@ -4336,6 +4340,27 @@
ll_config.device_hw_info.fw_version.version,
ll_config.device_hw_info.fw_date.date);
+ if (new_device) {
+ switch (ll_config.device_hw_info.function_mode) {
+ case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
+ vxge_debug_init(VXGE_TRACE,
+ "%s: Single Function Mode Enabled", vdev->ndev->name);
+ break;
+ case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
+ vxge_debug_init(VXGE_TRACE,
+ "%s: Multi Function Mode Enabled", vdev->ndev->name);
+ break;
+ case VXGE_HW_FUNCTION_MODE_SRIOV:
+ vxge_debug_init(VXGE_TRACE,
+ "%s: Single Root IOV Mode Enabled", vdev->ndev->name);
+ break;
+ case VXGE_HW_FUNCTION_MODE_MRIOV:
+ vxge_debug_init(VXGE_TRACE,
+ "%s: Multi Root IOV Mode Enabled", vdev->ndev->name);
+ break;
+ }
+ }
+
vxge_print_parm(vdev, vpath_mask);
/* Store the fw version for ethttool option */
@@ -4353,7 +4378,7 @@
"%s: mac_addr_list : memory allocation failed",
vdev->ndev->name);
ret = -EPERM;
- goto _exit6;
+ goto _exit5;
}
macaddr = (u8 *)&entry->macaddr;
memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN);
@@ -4361,6 +4386,7 @@
vdev->vpaths[i].mac_addr_cnt = 1;
}
+ kfree(device_config);
vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d Exiting...",
vdev->ndev->name, __func__, __LINE__);
@@ -4370,16 +4396,14 @@
return 0;
-_exit6:
+_exit5:
for (i = 0; i < vdev->no_of_vpath; i++)
vxge_free_mac_add_list(&vdev->vpaths[i]);
vxge_device_unregister(hldev);
-_exit5:
+_exit4:
pci_disable_sriov(pdev);
vxge_hw_device_terminate(hldev);
-_exit4:
- iounmap(attr.bar1);
_exit3:
iounmap(attr.bar0);
_exit2:
@@ -4438,7 +4462,6 @@
kfree(vdev->vpaths);
iounmap(vdev->bar0);
- iounmap(vdev->bar1);
pci_disable_sriov(pdev);
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/vxge/vxge-main.h
index 9704b2b..9c36b3a 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/vxge/vxge-main.h
@@ -21,7 +21,7 @@
#define VXGE_DRIVER_NAME "vxge"
#define VXGE_DRIVER_VENDOR "Neterion, Inc"
-#define VXGE_DRIVER_VERSION_MAJOR 0
+#define VXGE_DRIVER_FW_VERSION_MAJOR 1
#define DRV_VERSION VXGE_VERSION_MAJOR"."VXGE_VERSION_MINOR"."\
VXGE_VERSION_FIX"."VXGE_VERSION_BUILD"-"\
@@ -260,6 +260,7 @@
int gro_enable;
struct napi_struct napi;
+ struct napi_struct *napi_p;
#define VXGE_MAX_MAC_ADDR_COUNT 30
@@ -363,7 +364,6 @@
struct __vxge_hw_vpath_handle *vp_handles[VXGE_HW_MAX_VIRTUAL_PATHS];
void __iomem *bar0;
- void __iomem *bar1;
struct vxge_sw_stats stats;
int mtu;
/* Below variables are used for vpath selection to transmit a packet */
@@ -378,6 +378,7 @@
struct vxge_rx_priv {
struct sk_buff *skb;
+ unsigned char *skb_data;
dma_addr_t data_dma;
dma_addr_t data_size;
};
@@ -428,7 +429,8 @@
enum vxge_hw_status
vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
- enum vxge_hw_fifo_tcode t_code, void *userdata, void **skb_ptr);
+ enum vxge_hw_fifo_tcode t_code, void *userdata,
+ struct sk_buff ***skb_ptr, int nr_skbs, int *more);
int vxge_close(struct net_device *dev);
diff --git a/drivers/net/vxge/vxge-reg.h b/drivers/net/vxge/vxge-reg.h
index 10f4da3..9a3b823 100644
--- a/drivers/net/vxge/vxge-reg.h
+++ b/drivers/net/vxge/vxge-reg.h
@@ -1784,7 +1784,7 @@
#define VXGE_HW_XMAC_GEN_ERR_REG_XMACJ_XMAC_FSM_ERR vxge_mBIT(63)
/*0x01e18*/ u64 xmac_gen_err_mask;
/*0x01e20*/ u64 xmac_gen_err_alarm;
-/*0x01e28*/ u64 xmac_link_err_port_reg[2];
+/*0x01e28*/ u64 xmac_link_err_port0_reg;
#define VXGE_HW_XMAC_LINK_ERR_PORT_REG_XMACJ_PORT_DOWN vxge_mBIT(3)
#define VXGE_HW_XMAC_LINK_ERR_PORT_REG_XMACJ_PORT_UP vxge_mBIT(7)
#define VXGE_HW_XMAC_LINK_ERR_PORT_REG_XMACJ_PORT_WENT_DOWN vxge_mBIT(11)
@@ -1798,8 +1798,11 @@
#define VXGE_HW_XMAC_LINK_ERR_PORT_REG_RATEMGMT_LASI_INV vxge_mBIT(39)
#define VXGE_HW_XMAC_LINK_ERR_PORT_REG_XMDIO_MDIO_MGR_ACCESS_COMPLETE \
vxge_mBIT(47)
-/*0x01e30*/ u64 xmac_link_err_port_mask[2];
-/*0x01e38*/ u64 xmac_link_err_port_alarm[2];
+/*0x01e30*/ u64 xmac_link_err_port0_mask;
+/*0x01e38*/ u64 xmac_link_err_port0_alarm;
+/*0x01e40*/ u64 xmac_link_err_port1_reg;
+/*0x01e48*/ u64 xmac_link_err_port1_mask;
+/*0x01e50*/ u64 xmac_link_err_port1_alarm;
/*0x01e58*/ u64 xgxs_gen_err_reg;
#define VXGE_HW_XGXS_GEN_ERR_REG_XGXS_XGXS_FSM_ERR vxge_mBIT(63)
/*0x01e60*/ u64 xgxs_gen_err_mask;
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 370f55c..fe3ae51 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -731,6 +731,7 @@
vxge_assert(channel->compl_index < channel->length);
*dtrh = channel->work_arr[channel->compl_index];
+ prefetch(*dtrh);
}
/*
@@ -1070,11 +1071,11 @@
VXGE_HW_NODBW_GET_NO_SNOOP(no_snoop),
&fifo->nofl_db->control_0);
- wmb();
+ mmiowb();
writeq(txdl_ptr, &fifo->nofl_db->txdl_ptr);
- wmb();
+ mmiowb();
}
/**
@@ -2508,7 +2509,8 @@
* See also: vxge_hw_vpath_poll_tx().
*/
enum vxge_hw_status vxge_hw_vpath_poll_tx(struct __vxge_hw_fifo *fifo,
- void **skb_ptr)
+ struct sk_buff ***skb_ptr, int nr_skb,
+ int *more)
{
enum vxge_hw_fifo_tcode t_code;
void *first_txdlh;
@@ -2520,8 +2522,8 @@
status = vxge_hw_fifo_txdl_next_completed(fifo,
&first_txdlh, &t_code);
if (status == VXGE_HW_OK)
- if (fifo->callback(fifo, first_txdlh,
- t_code, channel->userdata, skb_ptr) != VXGE_HW_OK)
+ if (fifo->callback(fifo, first_txdlh, t_code,
+ channel->userdata, skb_ptr, nr_skb, more) != VXGE_HW_OK)
status = VXGE_HW_COMPLETIONS_REMAIN;
return status;
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 7567a11..461742b 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -35,8 +35,6 @@
VXGE_HW_HEADER_VLAN_SIZE + \
VXGE_HW_HEADER_SNAP_SIZE)
-#define VXGE_HW_TCPIP_HEADER_MAX_SIZE (64 + 64)
-
/* 32bit alignments */
#define VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN 2
#define VXGE_HW_HEADER_802_2_SNAP_ALIGN 2
@@ -2328,7 +2326,7 @@
enum vxge_hw_status vxge_hw_vpath_poll_tx(
struct __vxge_hw_fifo *fifoh,
- void **skb_ptr);
+ struct sk_buff ***skb_ptr, int nr_skb, int *more);
enum vxge_hw_status vxge_hw_vpath_alarm_process(
struct __vxge_hw_vpath_handle *vpath_handle,
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index 82786ff..8fbce75 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -17,7 +17,7 @@
#define VXGE_VERSION_MAJOR "2"
#define VXGE_VERSION_MINOR "0"
-#define VXGE_VERSION_FIX "4"
-#define VXGE_VERSION_BUILD "17795"
+#define VXGE_VERSION_FIX "5"
+#define VXGE_VERSION_BUILD "18053"
#define VXGE_VERSION_FOR "k"
#endif
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 61581ee..66360a2 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -279,7 +279,7 @@
static int cosa_net_open(struct net_device *d);
static int cosa_net_close(struct net_device *d);
static void cosa_net_timeout(struct net_device *d);
-static int cosa_net_tx(struct sk_buff *skb, struct net_device *d);
+static netdev_tx_t cosa_net_tx(struct sk_buff *skb, struct net_device *d);
static char *cosa_net_setup_rx(struct channel_data *channel, int size);
static int cosa_net_rx_done(struct channel_data *channel);
static int cosa_net_tx_done(struct channel_data *channel, int size);
@@ -672,7 +672,8 @@
return 0;
}
-static int cosa_net_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t cosa_net_tx(struct sk_buff *skb,
+ struct net_device *dev)
{
struct channel_data *chan = dev_to_chan(dev);
@@ -680,7 +681,7 @@
chan->tx_skb = skb;
cosa_start_tx(chan, skb->data, skb->len);
- return 0;
+ return NETDEV_TX_OK;
}
static void cosa_net_timeout(struct net_device *dev)
diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c
index f525f9f..2573c18 100644
--- a/drivers/net/wan/cycx_x25.c
+++ b/drivers/net/wan/cycx_x25.c
@@ -139,8 +139,8 @@
const void *daddr, const void *saddr,
unsigned len);
static int cycx_netdevice_rebuild_header(struct sk_buff *skb);
-static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static struct net_device_stats *
cycx_netdevice_get_stats(struct net_device *dev);
@@ -593,8 +593,8 @@
* bottom half" (with interrupts enabled).
* 2. Setting tbusy flag will inhibit further transmit requests from the
* protocol stack and can be used for flow control with protocol layer. */
-static int cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct cycx_x25_channel *chan = netdev_priv(dev);
struct cycx_device *card = chan->card;
@@ -663,7 +663,7 @@
free_packet:
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* Get Ethernet-style interface statistics.
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 2fa275a..15d353f 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -186,45 +186,13 @@
dev_kfree_skb(skb);
}
-static int dlci_transmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t dlci_transmit(struct sk_buff *skb, struct net_device *dev)
{
- struct dlci_local *dlp;
- int ret;
+ struct dlci_local *dlp = netdev_priv(dev);
- ret = 0;
-
- if (!skb || !dev)
- return(0);
-
- dlp = netdev_priv(dev);
-
- netif_stop_queue(dev);
-
- ret = dlp->slave->netdev_ops->ndo_start_xmit(skb, dlp->slave);
- switch (ret)
- {
- case DLCI_RET_OK:
- dev->stats.tx_packets++;
- ret = NETDEV_TX_OK;
- break;
- case DLCI_RET_ERR:
- dev->stats.tx_errors++;
- ret = NETDEV_TX_OK;
- break;
- case DLCI_RET_DROP:
- dev->stats.tx_dropped++;
- ret = NETDEV_TX_BUSY;
- break;
- }
- /* Alan Cox recommends always returning 0, and always freeing the packet */
- /* experience suggest a slightly more conservative approach */
-
- if (!ret)
- {
- dev_kfree_skb(skb);
- netif_wake_queue(dev);
- }
- return(ret);
+ if (skb)
+ dlp->slave->netdev_ops->ndo_start_xmit(skb, dlp->slave);
+ return NETDEV_TX_OK;
}
static int dlci_config(struct net_device *dev, struct dlci_conf __user *conf, int get)
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 8face5d..81c8aec 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -359,7 +359,8 @@
static int dscc4_found1(struct pci_dev *, void __iomem *ioaddr);
static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent);
static int dscc4_open(struct net_device *);
-static int dscc4_start_xmit(struct sk_buff *, struct net_device *);
+static netdev_tx_t dscc4_start_xmit(struct sk_buff *,
+ struct net_device *);
static int dscc4_close(struct net_device *);
static int dscc4_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int dscc4_init_ring(struct net_device *);
@@ -663,12 +664,12 @@
} else {
if (skb->data[pkt_len] & FrameRdo)
dev->stats.rx_fifo_errors++;
- else if (!(skb->data[pkt_len] | ~FrameCrc))
+ else if (!(skb->data[pkt_len] & FrameCrc))
dev->stats.rx_crc_errors++;
- else if (!(skb->data[pkt_len] | ~(FrameVfr | FrameRab)))
+ else if ((skb->data[pkt_len] & (FrameVfr | FrameRab)) !=
+ (FrameVfr | FrameRab))
dev->stats.rx_length_errors++;
- else
- dev->stats.rx_errors++;
+ dev->stats.rx_errors++;
dev_kfree_skb_irq(skb);
}
refill:
@@ -1148,7 +1149,8 @@
}
#endif /* DSCC4_POLLING */
-static int dscc4_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t dscc4_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
struct dscc4_pci_priv *ppriv = dpriv->pci_priv;
@@ -1182,7 +1184,7 @@
if (dscc4_tx_quiescent(dpriv, dev))
dscc4_do_tx(dpriv, dev);
- return 0;
+ return NETDEV_TX_OK;
}
static int dscc4_close(struct net_device *dev)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 25c9ef6..3e90eb8 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -792,25 +792,6 @@
*/
break;
}
-
- case NET_RX_CN_LOW:
- {
- dbg(DBG_ASS, "%s: Receive Low Congestion\n", name);
- break;
- }
-
- case NET_RX_CN_MOD:
- {
- dbg(DBG_ASS, "%s: Receive Moderate Congestion\n", name);
- break;
- }
-
- case NET_RX_CN_HIGH:
- {
- dbg(DBG_ASS, "%s: Receive High Congestion\n", name);
- break;
- }
-
case NET_RX_DROP:
{
dbg(DBG_ASS, "%s: Received packet dropped\n", name);
@@ -2293,7 +2274,7 @@
port->start = 0;
}
-static int
+static netdev_tx_t
fst_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct fst_card_info *card;
@@ -2313,7 +2294,7 @@
dbg(DBG_ASS,
"Tried to transmit but no carrier on card %d port %d\n",
card->card_no, port->index);
- return 0;
+ return NETDEV_TX_OK;
}
/* Drop it if it's too big! MTU failure ? */
@@ -2322,7 +2303,7 @@
LEN_TX_BUFFER);
dev_kfree_skb(skb);
dev->stats.tx_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -2356,7 +2337,7 @@
dev->stats.tx_errors++;
dbg(DBG_ASS, "Tx queue overflow card %d port %d\n",
card->card_no, port->index);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -2373,7 +2354,7 @@
fst_q_work_item(&fst_work_txq, card->card_no);
tasklet_schedule(&fst_tx_task);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index 1ea1ef6..80114c9 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -620,7 +620,7 @@
#endif /* DEBUG_RINGS */
-static int sca_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sca_xmit(struct sk_buff *skb, struct net_device *dev)
{
port_t *port = dev_to_port(dev);
card_t *card = port_to_card(port);
@@ -674,7 +674,7 @@
spin_unlock_irq(&port->lock);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index f099c34..84f0137 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -562,7 +562,7 @@
#endif /* DEBUG_RINGS */
-static int sca_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sca_xmit(struct sk_buff *skb, struct net_device *dev)
{
port_t *port = dev_to_port(dev);
card_t *card = port->card;
@@ -601,7 +601,7 @@
spin_unlock_irq(&port->lock);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 7596eae..cc07236 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -66,7 +66,7 @@
return hdlc->proto->netif_rx(skb);
}
-int hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index bfa0161..840cff7 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -407,7 +407,7 @@
return -EINVAL;
}
-static int pvc_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
{
pvc_device *pvc = dev->ml_priv;
@@ -421,7 +421,7 @@
GFP_ATOMIC)) {
dev->stats.tx_dropped++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
skb_put(skb, pad);
memset(skb->data + len, 0, pad);
@@ -435,13 +435,13 @@
dev->stats.tx_compressed++;
skb->dev = pvc->frad;
dev_queue_xmit(skb);
- return 0;
+ return NETDEV_TX_OK;
}
}
dev->stats.tx_dropped++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static inline void fr_log_dlci_active(pvc_device *pvc)
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 72a7cda..b9b9d6b 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -389,6 +389,7 @@
for (opt = data; len; len -= opt[1], opt += opt[1]) {
if (len < 2 || len < opt[1]) {
dev->stats.rx_errors++;
+ kfree(out);
return; /* bad packet, drop silently */
}
diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c
index 49e68f5..1b30fcc 100644
--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -25,7 +25,7 @@
static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr);
-static int eth_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t eth_tx(struct sk_buff *skb, struct net_device *dev)
{
int pad = ETH_ZLEN - skb->len;
if (pad > 0) { /* Pad the frame with zeros */
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index b1dc29e..aa9248f 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -87,7 +87,7 @@
-static int x25_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
{
int result;
@@ -98,7 +98,7 @@
skb_pull(skb, 1);
if ((result = lapb_data_request(dev, skb)) != LAPB_OK)
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
case 1:
if ((result = lapb_connect_request(dev))!= LAPB_OK) {
@@ -129,7 +129,7 @@
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 567d4f5..15002c3 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -156,7 +156,8 @@
* Passed network frames, fire them downwind.
*/
-static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d)
+static netdev_tx_t hostess_queue_xmit(struct sk_buff *skb,
+ struct net_device *d)
{
return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb);
}
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index bb719b6..c705046 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -166,6 +166,29 @@
#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
+/*
+ * HSS_CONFIG_CLOCK_CR register consists of 3 parts:
+ * A (10 bits), B (10 bits) and C (12 bits).
+ * IXP42x HSS clock generator operation (verified with an oscilloscope):
+ * Each clock bit takes 7.5 ns (1 / 133.xx MHz).
+ * The clock sequence consists of (C - B) states of 0s and 1s, each state is
+ * A bits wide. It's followed by (B + 1) states of 0s and 1s, each state is
+ * (A + 1) bits wide.
+ *
+ * The resulting average clock frequency (assuming 33.333 MHz oscillator) is:
+ * freq = 66.666 MHz / (A + (B + 1) / (C + 1))
+ * minumum freq = 66.666 MHz / (A + 1)
+ * maximum freq = 66.666 MHz / A
+ *
+ * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7
+ * freq = 66.666 MHz / (2 + (2 + 1) / (7 + 1)) = 28.07 MHz (Mb/s).
+ * The clock sequence is: 1100110011 (5 doubles) 000111000 (3 triples).
+ * The sequence takes (C - B) * A + (B + 1) * (A + 1) = 5 * 2 + 3 * 3 bits
+ * = 19 bits (each 7.5 ns long) = 142.5 ns (then the sequence repeats).
+ * The sequence consists of 4 complete clock periods, thus the average
+ * frequency (= clock rate) is 4 / 142.5 ns = 28.07 MHz (Mb/s).
+ * (max specified clock rate for IXP42x HSS is 8.192 Mb/s).
+ */
/* hss_config, LUT entries */
#define TDMMAP_UNASSIGNED 0
@@ -239,6 +262,7 @@
unsigned int clock_type, clock_rate, loopback;
unsigned int initialized, carrier;
u8 hdlc_cfg;
+ u32 clock_reg;
};
/* NPE message structure */
@@ -393,7 +417,7 @@
msg.cmd = PORT_CONFIG_WRITE;
msg.hss_port = port->id;
msg.index = HSS_CONFIG_CLOCK_CR;
- msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
+ msg.data32 = port->clock_reg;
hss_npe_send(port, &msg, "HSS_SET_CLOCK_CR");
memset(&msg, 0, sizeof(msg));
@@ -1160,6 +1184,62 @@
}
}
+static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
+ u32 *best, u32 *best_diff, u32 *reg)
+{
+ /* a is 10-bit, b is 10-bit, c is 12-bit */
+ u64 new_rate;
+ u32 new_diff;
+
+ new_rate = ixp4xx_timer_freq * (u64)(c + 1);
+ do_div(new_rate, a * (c + 1) + b + 1);
+ new_diff = abs((u32)new_rate - rate);
+
+ if (new_diff < *best_diff) {
+ *best = new_rate;
+ *best_diff = new_diff;
+ *reg = (a << 22) | (b << 12) | c;
+ }
+ return new_diff;
+}
+
+static void find_best_clock(u32 rate, u32 *best, u32 *reg)
+{
+ u32 a, b, diff = 0xFFFFFFFF;
+
+ a = ixp4xx_timer_freq / rate;
+
+ if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */
+ check_clock(rate, 0x3FF, 1, 1, best, &diff, reg);
+ return;
+ }
+ if (a == 0) { /* > 66.666 MHz */
+ a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */
+ rate = ixp4xx_timer_freq;
+ }
+
+ if (rate * a == ixp4xx_timer_freq) { /* don't divide by 0 later */
+ check_clock(rate, a - 1, 1, 1, best, &diff, reg);
+ return;
+ }
+
+ for (b = 0; b < 0x400; b++) {
+ u64 c = (b + 1) * (u64)rate;
+ do_div(c, ixp4xx_timer_freq - rate * a);
+ c--;
+ if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */
+ if (b == 0 && /* also try a bit higher rate */
+ !check_clock(rate, a - 1, 1, 1, best, &diff, reg))
+ return;
+ check_clock(rate, a, b, 0xFFF, best, &diff, reg);
+ return;
+ }
+ if (!check_clock(rate, a, b, c, best, &diff, reg))
+ return;
+ if (!check_clock(rate, a, b, c + 1, best, &diff, reg))
+ return;
+ }
+}
static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
@@ -1182,7 +1262,7 @@
}
memset(&new_line, 0, sizeof(new_line));
new_line.clock_type = port->clock_type;
- new_line.clock_rate = 2048000; /* FIXME */
+ new_line.clock_rate = port->clock_rate;
new_line.loopback = port->loopback;
if (copy_to_user(line, &new_line, size))
return -EFAULT;
@@ -1206,7 +1286,13 @@
return -EINVAL;
port->clock_type = clk; /* Update settings */
- /* FIXME port->clock_rate = new_line.clock_rate */;
+ if (clk == CLOCK_INT)
+ find_best_clock(new_line.clock_rate, &port->clock_rate,
+ &port->clock_reg);
+ else {
+ port->clock_rate = 0;
+ port->clock_reg = CLK42X_SPEED_2048KHZ;
+ }
port->loopback = new_line.loopback;
spin_lock_irqsave(&npe_lock, flags);
@@ -1266,7 +1352,8 @@
dev->netdev_ops = &hss_hdlc_ops;
dev->tx_queue_len = 100;
port->clock_type = CLOCK_EXT;
- port->clock_rate = 2048000;
+ port->clock_rate = 0;
+ port->clock_reg = CLK42X_SPEED_2048KHZ;
port->id = pdev->id;
port->dev = &pdev->dev;
port->plat = pdev->dev.platform_data;
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index aff4f6bd..d1e3c67 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -147,7 +147,8 @@
/*
* Send a LAPB frame via an ethernet interface
*/
-static int lapbeth_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
int err;
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 45b1822..7ea71b3 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -89,7 +89,8 @@
MODULE_LICENSE("GPL v2");
-static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int lmc_rx (struct net_device *dev);
static int lmc_open(struct net_device *dev);
static int lmc_close(struct net_device *dev);
@@ -1423,12 +1424,12 @@
return IRQ_RETVAL(handled);
}
-static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
lmc_softc_t *sc = dev_to_sc(dev);
u32 flag;
int entry;
- int ret = 0;
unsigned long flags;
lmc_trace(dev, "lmc_start_xmit in");
@@ -1510,7 +1511,7 @@
spin_unlock_irqrestore(&sc->lmc_lock, flags);
lmc_trace(dev, "lmc_start_xmit_out");
- return ret;
+ return NETDEV_TX_OK;
}
@@ -1657,7 +1658,7 @@
}
skb_copy_from_linear_data(skb, skb_put(nsb, len), len);
- nsb->protocol = lmc_proto_type(sc, skb);
+ nsb->protocol = lmc_proto_type(sc, nsb);
skb_reset_mac_header(nsb);
/* skb_reset_network_header(nsb); */
nsb->dev = dev;
@@ -1897,11 +1898,12 @@
/*
* Sets end of ring
*/
- sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */
- sc->lmc_rxring[i - 1].buffer2 = virt_to_bus (&sc->lmc_rxring[0]); /* Point back to the start */
+ if (i != 0) {
+ sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */
+ sc->lmc_rxring[i - 1].buffer2 = virt_to_bus(&sc->lmc_rxring[0]); /* Point back to the start */
+ }
LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */
-
/* Initialize the transmit rings and buffers */
for (i = 0; i < LMC_TXDESCS; i++)
{
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index e035d8c..a52f29c 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -360,15 +360,6 @@
" %u RX packets rings\n", ramsize / 1024, ramphys,
pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
- if (pdev->subsystem_device == PCI_DEVICE_ID_PLX_9050) {
- printk(KERN_ERR "Detected PCI200SYN card with old "
- "configuration data.\n");
- printk(KERN_ERR "See <http://www.kernel.org/pub/"
- "linux/utils/net/hdlc/pci200syn/> for update.\n");
- printk(KERN_ERR "The card will stop working with"
- " future versions of Linux if not updated.\n");
- }
-
if (card->tx_ring_buffers < 1) {
printk(KERN_ERR "pci200syn: RAM test failed\n");
pci200_pci_remove_one(pdev);
@@ -427,8 +418,6 @@
static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
- PCI_DEVICE_ID_PLX_9050, 0, 0, 0 },
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
{ 0, }
};
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index d14e95a..1cc24a4 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -114,7 +114,8 @@
static struct net_device *sbni_probe1(struct net_device *, unsigned long, int);
static int sbni_open( struct net_device * );
static int sbni_close( struct net_device * );
-static int sbni_start_xmit( struct sk_buff *, struct net_device * );
+static netdev_tx_t sbni_start_xmit(struct sk_buff *,
+ struct net_device * );
static int sbni_ioctl( struct net_device *, struct ifreq *, int );
static void set_multicast_list( struct net_device * );
@@ -444,7 +445,7 @@
#ifdef CONFIG_SBNI_MULTILINE
-static int
+static netdev_tx_t
sbni_start_xmit( struct sk_buff *skb, struct net_device *dev )
{
struct net_device *p;
@@ -463,7 +464,7 @@
prepare_to_send( skb, p );
spin_unlock( &nl->lock );
netif_start_queue( dev );
- return 0;
+ return NETDEV_TX_OK;
}
}
@@ -472,7 +473,7 @@
#else /* CONFIG_SBNI_MULTILINE */
-static int
+static netdev_tx_t
sbni_start_xmit( struct sk_buff *skb, struct net_device *dev )
{
struct net_local *nl = netdev_priv(dev);
@@ -483,7 +484,7 @@
prepare_to_send( skb, dev );
spin_unlock( &nl->lock );
- return 0;
+ return NETDEV_TX_OK;
}
#endif /* CONFIG_SBNI_MULTILINE */
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 1d637f4..2b15a7e 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -651,7 +651,8 @@
**************************/
/* NOTE: the DLCI driver deals with freeing the SKB!! */
-static int sdla_transmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sdla_transmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct frad_local *flp;
int ret, addr, accept, i;
@@ -711,23 +712,21 @@
}
break;
}
+
switch (ret)
{
case SDLA_RET_OK:
dev->stats.tx_packets++;
- ret = DLCI_RET_OK;
break;
case SDLA_RET_CIR_OVERFLOW:
case SDLA_RET_BUF_OVERSIZE:
case SDLA_RET_NO_BUFS:
dev->stats.tx_dropped++;
- ret = DLCI_RET_DROP;
break;
default:
dev->stats.tx_errors++;
- ret = DLCI_RET_ERR;
break;
}
}
@@ -737,7 +736,9 @@
if(flp->master[i]!=NULL)
netif_wake_queue(flp->master[i]);
}
- return(ret);
+
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
}
static void sdla_receive(struct net_device *dev)
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 23b2690..0c525e2 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -156,7 +156,8 @@
* Passed network frames, fire them downwind.
*/
-static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d)
+static netdev_tx_t sealevel_queue_xmit(struct sk_buff *skb,
+ struct net_device *d)
{
return z8530_queue_xmit(dev_to_chan(d)->chan, skb);
}
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index e4ad7b6..daee8a0 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -268,7 +268,7 @@
-static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
{
port_t *port = dev_to_port(dev);
desc_t *desc;
@@ -310,7 +310,7 @@
}
spin_unlock(&port->lock);
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index d67e208..2794504 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -299,7 +299,8 @@
/* Encapsulate an IP datagram and kick it into a TTY queue. */
-static int x25_asy_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct x25_asy *sl = netdev_priv(dev);
int err;
@@ -308,7 +309,7 @@
printk(KERN_ERR "%s: xmit call when iface is down\n",
dev->name);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
switch (skb->data[0]) {
@@ -319,14 +320,14 @@
if (err != LAPB_OK)
printk(KERN_ERR "x25_asy: lapb_connect_request error - %d\n", err);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
case 0x02: /* Disconnect request .. do nothing - hang up ?? */
err = lapb_disconnect_request(dev);
if (err != LAPB_OK)
printk(KERN_ERR "x25_asy: lapb_disconnect_request error - %d\n", err);
default:
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
skb_pull(skb, 1); /* Remove control byte */
/*
@@ -344,9 +345,9 @@
if (err != LAPB_OK) {
printk(KERN_ERR "x25_asy: lapb_data_request error - %d\n", err);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index ad4e79c..0be7ec7 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -1727,15 +1727,14 @@
* point.
*/
-int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
+netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
{
unsigned long flags;
netif_stop_queue(c->netdevice);
if(c->tx_next_skb)
- {
- return 1;
- }
+ return NETDEV_TX_BUSY;
+
/* PC SPECIFIC - DMA limits */
@@ -1767,7 +1766,7 @@
z8530_tx_begin(c);
spin_unlock_irqrestore(c->lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
EXPORT_SYMBOL(z8530_queue_xmit);
diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h
index 85b3e78..f29d554 100644
--- a/drivers/net/wan/z85230.h
+++ b/drivers/net/wan/z85230.h
@@ -406,7 +406,8 @@
extern int z8530_sync_txdma_open(struct net_device *, struct z8530_channel *);
extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *);
extern int z8530_channel_load(struct z8530_channel *, u8 *);
-extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb);
+extern netdev_tx_t z8530_queue_xmit(struct z8530_channel *c,
+ struct sk_buff *skb);
extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb);
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 9653f47..796396c 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -334,12 +334,12 @@
* that will sleep. See i2400m_net_wake_tx() for details.
*/
static
-int i2400m_hard_start_xmit(struct sk_buff *skb,
- struct net_device *net_dev)
+netdev_tx_t i2400m_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev)
{
- int result;
struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
struct device *dev = i2400m_dev(i2400m);
+ int result;
d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
if (i2400m->state == I2400M_SS_IDLE)
@@ -353,9 +353,9 @@
net_dev->stats.tx_bytes += skb->len;
}
kfree_skb(skb);
- result = NETDEV_TX_OK;
- d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
- return result;
+
+ d_fnend(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 2538825..2981e21 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -58,6 +58,7 @@
*/
#include <linux/debugfs.h>
+#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
#include "i2400m-sdio.h"
@@ -370,6 +371,10 @@
}
+static struct device_type i2400ms_type = {
+ .name = "wimax",
+};
+
/*
* Probe a i2400m interface and register it
*
@@ -411,6 +416,7 @@
goto error_alloc_netdev;
}
SET_NETDEV_DEV(net_dev, dev);
+ SET_NETDEV_DEVTYPE(net_dev, &i2400ms_type);
i2400m = net_dev_to_i2400m(net_dev);
i2400ms = container_of(i2400m, struct i2400ms, i2400m);
i2400m->wimax_dev.net_dev = net_dev;
@@ -501,15 +507,12 @@
d_fnend(3, dev, "SDIO func %p\n", func);
}
-enum {
- I2400MS_INTEL_VID = 0x89,
-};
-
static
const struct sdio_device_id i2400ms_sdio_ids[] = {
- /* Intel: i2400m WiMAX over SDIO */
- { SDIO_DEVICE(I2400MS_INTEL_VID, 0x1402) },
- { }, /* end: all zeroes */
+ /* Intel: i2400m WiMAX (iwmc3200) over SDIO */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
+ SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX) },
+ { /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(sdio, i2400ms_sdio_ids);
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index cfdaf69..7eadd11 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -351,6 +351,10 @@
}
+static struct device_type i2400mu_type = {
+ .name = "wimax",
+};
+
/*
* Probe a i2400m interface and register it
*
@@ -388,6 +392,7 @@
goto error_alloc_netdev;
}
SET_NETDEV_DEV(net_dev, dev);
+ SET_NETDEV_DEVTYPE(net_dev, &i2400mu_type);
i2400m = net_dev_to_i2400m(net_dev);
i2400mu = container_of(i2400m, struct i2400mu, i2400m);
i2400m->wimax_dev.net_dev = net_dev;
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 5bc00db..ad89d23 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -2,10 +2,19 @@
# Wireless LAN device configuration
#
-menu "Wireless LAN"
+menuconfig WLAN
+ bool "Wireless LAN"
depends on !S390
+ ---help---
+ This section contains all the pre 802.11 and 802.11 wireless
+ device drivers. For a complete list of drivers and documentation
+ on them refer to the wireless wiki:
-config WLAN_PRE80211
+ http://wireless.kernel.org/en/users/Drivers
+
+if WLAN
+
+menuconfig WLAN_PRE80211
bool "Wireless LAN (pre-802.11)"
depends on NETDEVICES
---help---
@@ -101,7 +110,7 @@
called netwave_cs. If unsure, say N.
-config WLAN_80211
+menuconfig WLAN_80211
bool "Wireless LAN (IEEE 802.11)"
depends on NETDEVICES
---help---
@@ -266,51 +275,26 @@
micro support for ethtool.
config PRISM54
- tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
+ tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
depends on PCI && EXPERIMENTAL && WLAN_80211
select WIRELESS_EXT
select FW_LOADER
---help---
- Enable PCI and Cardbus support for the following chipset based cards:
+ This enables support for FullMAC PCI/Cardbus prism54 devices. This
+ driver is now deprecated in favor for the SoftMAC driver, p54pci.
+ p54pci supports FullMAC PCI/Cardbus devices as well. For details on
+ the scheduled removal of this driver on the kernel see the feature
+ removal schedule:
- ISL3880 - Prism GT 802.11 b/g
- ISL3877 - Prism Indigo 802.11 a
- ISL3890 - Prism Duette 802.11 a/b/g
-
- For a complete list of supported cards visit <http://prism54.org>.
- Here is the latest confirmed list of supported cards:
+ Documentation/feature-removal-schedule.txt
- 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
- Allnet ALL0271 PCI Card
- Compex WL54G Cardbus Card
- Corega CG-WLCB54GT Cardbus Card
- D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
- I-O Data WN-G54/CB Cardbus Card
- Kobishi XG-300 aka Z-Com Cardbus Card
- Netgear WG511 Cardbus Card
- Ovislink WL-5400PCI PCI Card
- Peabird WLG-PCI PCI Card
- Sitecom WL-100i Cardbus Card
- Sitecom WL-110i PCI Card
- SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
- SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
- SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
- Z-Com XG-900 PCI Card
- Zyxel G-100 Cardbus Card
+ For more information refer to the p54 wiki:
- If you enable this you will need a firmware file as well.
- You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
- You can get this non-GPL'd firmware file from the Prism54 project page:
- <http://prism54.org>
- You will also need the /etc/hotplug/firmware.agent script from
- a current hotplug package.
+ http://wireless.kernel.org/en/users/Drivers/p54
- Note: You need a motherboard with DMA support to use any of these cards
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called prism54.
+ Note: You need a motherboard with DMA support to use any of these cards
+
+ When built as module you get the module prism54
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
@@ -337,7 +321,6 @@
select USB_USBNET
select USB_NET_CDCETHER
select USB_NET_RNDIS_HOST
- select WIRELESS_EXT
---help---
This is a driver for wireless RNDIS devices.
These are USB based adapters found in devices such as:
@@ -428,10 +411,12 @@
Micronet SP907GK V5
Encore ENUWI-G2
Trendnet TEW-424UB
- ASUS P5B Deluxe
+ ASUS P5B Deluxe/P5K Premium motherboards
Toshiba Satellite Pro series of laptops
Asus Wireless Link
- Linksys WUSB54GC-EU
+ Linksys WUSB54GC-EU v2
+ (v1 = rt73usb; v3 is rt2070-based,
+ use staging/rt3070 or try rt2800usb)
Thanks to Realtek for their support!
@@ -504,4 +489,4 @@
source "drivers/net/wireless/wl12xx/Kconfig"
source "drivers/net/wireless/iwmc3200wifi/Kconfig"
-endmenu
+endif # WLAN
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 2b9e379..b80f514 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -452,7 +452,8 @@
rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
rx_status.band = IEEE80211_BAND_2GHZ;
- ieee80211_rx_irqsafe(dev, skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(dev, skb);
}
entry = (++priv->cur_rx) % priv->rx_ring_size;
@@ -1327,16 +1328,39 @@
}
}
+static u64 adm8211_prepare_multicast(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mclist)
+{
+ unsigned int bit_nr, i;
+ u32 mc_filter[2];
+
+ mc_filter[1] = mc_filter[0] = 0;
+
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+ bit_nr &= 0x3F;
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ mclist = mclist->next;
+ }
+
+ return mc_filter[0] | ((u64)(mc_filter[1]) << 32);
+}
+
static void adm8211_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_mc_list *mclist)
+ u64 multicast)
{
static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
struct adm8211_priv *priv = dev->priv;
- unsigned int bit_nr, new_flags;
+ unsigned int new_flags;
u32 mc_filter[2];
- int i;
+
+ mc_filter[0] = multicast;
+ mc_filter[1] = multicast >> 32;
new_flags = 0;
@@ -1345,23 +1369,13 @@
priv->nar |= ADM8211_NAR_PR;
priv->nar &= ~ADM8211_NAR_MM;
mc_filter[1] = mc_filter[0] = ~0;
- } else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) {
+ } else if (*total_flags & FIF_ALLMULTI || multicast == ~(0ULL)) {
new_flags |= FIF_ALLMULTI;
priv->nar &= ~ADM8211_NAR_PR;
priv->nar |= ADM8211_NAR_MM;
mc_filter[1] = mc_filter[0] = ~0;
} else {
priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR);
- mc_filter[1] = mc_filter[0] = 0;
- for (i = 0; i < mc_count; i++) {
- if (!mclist)
- break;
- bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
-
- bit_nr &= 0x3F;
- mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
- mclist = mclist->next;
- }
}
ADM8211_IDLE_RX();
@@ -1756,6 +1770,7 @@
.remove_interface = adm8211_remove_interface,
.config = adm8211_config,
.bss_info_changed = adm8211_bss_info_changed,
+ .prepare_multicast = adm8211_prepare_multicast,
.configure_filter = adm8211_configure_filter,
.get_stats = adm8211_get_stats,
.get_tx_stats = adm8211_get_tx_stats,
@@ -1963,14 +1978,6 @@
#ifdef CONFIG_PM
static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state)
{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct adm8211_priv *priv = dev->priv;
-
- if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) {
- ieee80211_stop_queues(dev);
- adm8211_stop(dev);
- }
-
pci_save_state(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
@@ -1978,17 +1985,8 @@
static int adm8211_resume(struct pci_dev *pdev)
{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct adm8211_priv *priv = dev->priv;
-
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
-
- if (priv->mode != NL80211_IFTYPE_UNSPECIFIED) {
- adm8211_start(dev);
- ieee80211_wake_queues(dev);
- }
-
return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 8ce5e4c..7116a1a 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1920,14 +1920,16 @@
return 0;
}
-static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) {
+static netdev_tx_t mpi_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
int npacks, pending;
unsigned long flags;
struct airo_info *ai = dev->ml_priv;
if (!skb) {
airo_print_err(dev->name, "%s: skb == NULL!",__func__);
- return 0;
+ return NETDEV_TX_OK;
}
npacks = skb_queue_len (&ai->txq);
@@ -1938,7 +1940,7 @@
return NETDEV_TX_BUSY;
}
skb_queue_tail (&ai->txq, skb);
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&ai->aux_lock, flags);
@@ -1951,7 +1953,7 @@
set_bit(FLAG_PENDING_XMIT, &ai->flags);
mpi_send_packet (dev);
}
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -2119,7 +2121,9 @@
dev_kfree_skb(skb);
}
-static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) {
+static netdev_tx_t airo_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
s16 len;
int i, j;
struct airo_info *priv = dev->ml_priv;
@@ -2127,7 +2131,7 @@
if ( skb == NULL ) {
airo_print_err(dev->name, "%s: skb == NULL!", __func__);
- return 0;
+ return NETDEV_TX_OK;
}
/* Find a vacant FID */
@@ -2155,7 +2159,7 @@
wake_up_interruptible(&priv->thr_wait);
} else
airo_end_xmit(dev);
- return 0;
+ return NETDEV_TX_OK;
}
static void airo_end_xmit11(struct net_device *dev) {
@@ -2184,7 +2188,9 @@
dev_kfree_skb(skb);
}
-static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
+static netdev_tx_t airo_start_xmit11(struct sk_buff *skb,
+ struct net_device *dev)
+{
s16 len;
int i, j;
struct airo_info *priv = dev->ml_priv;
@@ -2199,7 +2205,7 @@
if ( skb == NULL ) {
airo_print_err(dev->name, "%s: skb == NULL!", __func__);
- return 0;
+ return NETDEV_TX_OK;
}
/* Find a vacant FID */
@@ -2227,7 +2233,7 @@
wake_up_interruptible(&priv->thr_wait);
} else
airo_end_xmit11(dev);
- return 0;
+ return NETDEV_TX_OK;
}
static void airo_read_stats(struct net_device *dev)
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index d84caf1..921a082 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -77,7 +77,7 @@
static int arlans_found;
static int arlan_open(struct net_device *dev);
-static int arlan_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t arlan_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t arlan_interrupt(int irq, void *dev_id);
static int arlan_close(struct net_device *dev);
static struct net_device_stats *
@@ -1022,7 +1022,7 @@
ARLAN_DEBUG_ENTRY("arlan_mac_addr");
return -EINVAL;
- if (!netif_running(dev))
+ if (netif_running(dev))
return -EBUSY;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
@@ -1169,7 +1169,7 @@
}
-static int arlan_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t arlan_tx(struct sk_buff *skb, struct net_device *dev)
{
short length;
unsigned char *buf;
@@ -1193,7 +1193,7 @@
arlan_process_interrupt(dev);
ARLAN_DEBUG_EXIT("arlan_tx");
- return 0;
+ return NETDEV_TX_OK;
bad_end:
arlan_process_interrupt(dev);
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 4efbdbe..8e1a55d 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1568,7 +1568,8 @@
at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
priv->rx_skb->len, priv->rx_skb->data_len);
- ieee80211_rx_irqsafe(priv->hw, priv->rx_skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);
/* Use a new skb for the next receive */
priv->rx_skb = NULL;
@@ -1772,6 +1773,9 @@
at76_dbg(DBG_MAC80211, "%s()", __func__);
+ cancel_delayed_work(&priv->dwork_hw_scan);
+ cancel_work_sync(&priv->work_set_promisc);
+
mutex_lock(&priv->mtx);
if (!priv->device_unplugged) {
@@ -1871,8 +1875,8 @@
/* FIXME: add maximum time for scan to complete */
if (ret != CMD_STATUS_COMPLETE) {
- queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
- SCAN_POLL_INTERVAL);
+ ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
+ SCAN_POLL_INTERVAL);
mutex_unlock(&priv->mtx);
return;
}
@@ -1933,8 +1937,8 @@
goto exit;
}
- queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
- SCAN_POLL_INTERVAL);
+ ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
+ SCAN_POLL_INTERVAL);
exit:
mutex_unlock(&priv->mtx);
@@ -1946,9 +1950,8 @@
{
struct at76_priv *priv = hw->priv;
- at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d",
- __func__, hw->conf.channel->hw_value,
- hw->conf.radio_enabled);
+ at76_dbg(DBG_MAC80211, "%s(): channel %d",
+ __func__, hw->conf.channel->hw_value);
at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
mutex_lock(&priv->mtx);
@@ -1993,15 +1996,14 @@
/* must be atomic */
static void at76_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
- unsigned int *total_flags, int mc_count,
- struct dev_addr_list *mc_list)
+ unsigned int *total_flags, u64 multicast)
{
struct at76_priv *priv = hw->priv;
int flags;
at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
- "total_flags=0x%08x mc_count=%d",
- __func__, changed_flags, *total_flags, mc_count);
+ "total_flags=0x%08x",
+ __func__, changed_flags, *total_flags);
flags = changed_flags & AT76_SUPPORTED_FILTERS;
*total_flags = AT76_SUPPORTED_FILTERS;
@@ -2023,7 +2025,7 @@
} else
return;
- queue_work(hw->workqueue, &priv->work_set_promisc);
+ ieee80211_queue_work(hw, &priv->work_set_promisc);
}
static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -2294,11 +2296,8 @@
tasklet_kill(&priv->rx_tasklet);
- if (priv->mac80211_registered) {
- cancel_delayed_work(&priv->dwork_hw_scan);
- flush_workqueue(priv->hw->workqueue);
+ if (priv->mac80211_registered)
ieee80211_unregister_hw(priv->hw);
- }
if (priv->tx_urb) {
usb_kill_urb(priv->tx_urb);
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index eb0337c..11ded15 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,9 +1,22 @@
-config ATH_COMMON
+menuconfig ATH_COMMON
tristate "Atheros Wireless Cards"
depends on WLAN_80211
- depends on ATH5K || ATH9K || AR9170_USB
+ depends on CFG80211
+ ---help---
+ This will enable the support for the Atheros wireless drivers.
+ ath5k, ath9k and ar9170 drivers share some common code, this option
+ enables the common ath.ko module which shares common helpers.
+ For more information and documentation on this module you can visit:
+
+ http://wireless.kernel.org/en/users/Drivers/ath
+
+ For information on all Atheros wireless drivers visit:
+
+ http://wireless.kernel.org/en/users/Drivers/Atheros
+
+if ATH_COMMON
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/ar9170/Kconfig"
-
+endif
diff --git a/drivers/net/wireless/ath/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig
index b99e326..05918f1 100644
--- a/drivers/net/wireless/ath/ar9170/Kconfig
+++ b/drivers/net/wireless/ath/ar9170/Kconfig
@@ -1,13 +1,13 @@
config AR9170_USB
tristate "Atheros AR9170 802.11n USB support"
- depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ depends on USB && MAC80211 && WLAN_80211
select FW_LOADER
- select ATH_COMMON
help
This is a driver for the Atheros "otus" 802.11n USB devices.
These devices require additional firmware (2 files).
For now, these files can be downloaded from here:
+
http://wireless.kernel.org/en/users/Drivers/ar9170
If you choose to build a module, it'll be called ar9170usb.
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index bb97981..914e471 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -109,13 +109,55 @@
bool has_plcp;
};
+#define AR9170_NUM_MAX_BA_RETRY 5
+#define AR9170_NUM_TID 16
+#define WME_BA_BMP_SIZE 64
+#define AR9170_NUM_MAX_AGG_LEN (2 * WME_BA_BMP_SIZE)
+
+#define WME_AC_BE 2
+#define WME_AC_BK 3
+#define WME_AC_VI 1
+#define WME_AC_VO 0
+
+#define TID_TO_WME_AC(_tid) \
+ ((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \
+ (((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK : \
+ (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI : \
+ WME_AC_VO)
+
+#define BAW_WITHIN(_start, _bawsz, _seqno) \
+ ((((_seqno) - (_start)) & 0xfff) < (_bawsz))
+
+enum ar9170_tid_state {
+ AR9170_TID_STATE_INVALID,
+ AR9170_TID_STATE_SHUTDOWN,
+ AR9170_TID_STATE_PROGRESS,
+ AR9170_TID_STATE_COMPLETE,
+};
+
+struct ar9170_sta_tid {
+ struct list_head list;
+ struct sk_buff_head queue;
+ u8 addr[ETH_ALEN];
+ u16 ssn;
+ u16 tid;
+ enum ar9170_tid_state state;
+ bool active;
+ u8 retry;
+};
+
#define AR9170_QUEUE_TIMEOUT 64
#define AR9170_TX_TIMEOUT 8
+#define AR9170_BA_TIMEOUT 4
#define AR9170_JANITOR_DELAY 128
#define AR9170_TX_INVALID_RATE 0xffffffff
+#define AR9170_NUM_TX_STATUS 128
+#define AR9170_NUM_TX_AGG_MAX 30
+
struct ar9170 {
struct ieee80211_hw *hw;
+ struct ath_common common;
struct mutex mutex;
enum ar9170_device_state state;
unsigned long bad_hw_nagger;
@@ -136,6 +178,7 @@
/* beaconing */
struct sk_buff *beacon;
struct work_struct beacon_work;
+ bool enable_beacon;
/* cryptographic engine */
u64 usedkeys;
@@ -143,10 +186,8 @@
bool disable_offload;
/* filter settings */
- struct work_struct filter_config_work;
- u64 cur_mc_hash, want_mc_hash;
- u32 cur_filter, want_filter;
- unsigned long filter_changed;
+ u64 cur_mc_hash;
+ u32 cur_filter;
unsigned int filter_state;
bool sniffer_enabled;
@@ -181,20 +222,30 @@
/* EEPROM */
struct ar9170_eeprom eeprom;
- struct ath_regulatory regulatory;
/* tx queues - as seen by hw - */
struct sk_buff_head tx_pending[__AR9170_NUM_TXQ];
struct sk_buff_head tx_status[__AR9170_NUM_TXQ];
struct delayed_work tx_janitor;
+ /* tx ampdu */
+ struct sk_buff_head tx_status_ampdu;
+ spinlock_t tx_ampdu_list_lock;
+ struct list_head tx_ampdu_list;
+ unsigned int tx_ampdu_pending;
/* rxstream mpdu merge */
struct ar9170_rxstream_mpdu_merge rx_mpdu;
struct sk_buff *rx_failover;
int rx_failover_missing;
+
+ /* (cached) HW A-MPDU settings */
+ u8 global_ampdu_density;
+ u8 global_ampdu_factor;
};
struct ar9170_sta_info {
+ struct ar9170_sta_tid agg[AR9170_NUM_TID];
+ unsigned int ampdu_max_len;
};
#define AR9170_TX_FLAG_WAIT_FOR_ACK BIT(0)
@@ -209,10 +260,6 @@
#define IS_STARTED(a) (((struct ar9170 *)a)->state >= AR9170_STARTED)
#define IS_ACCEPTING_CMD(a) (((struct ar9170 *)a)->state >= AR9170_IDLE)
-#define AR9170_FILTER_CHANGED_MODE BIT(0)
-#define AR9170_FILTER_CHANGED_MULTICAST BIT(1)
-#define AR9170_FILTER_CHANGED_FRAMEFILTER BIT(2)
-
/* exported interface */
void *ar9170_alloc(size_t priv_size);
int ar9170_register(struct ar9170 *ar, struct device *pdev);
@@ -226,8 +273,8 @@
int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
int ar9170_init_mac(struct ar9170 *ar);
int ar9170_set_qos(struct ar9170 *ar);
-int ar9170_update_multicast(struct ar9170 *ar);
-int ar9170_update_frame_filter(struct ar9170 *ar);
+int ar9170_update_multicast(struct ar9170 *ar, const u64 mc_hast);
+int ar9170_update_frame_filter(struct ar9170 *ar, const u32 filter);
int ar9170_set_operating_mode(struct ar9170 *ar);
int ar9170_set_beacon_timers(struct ar9170 *ar);
int ar9170_set_dyn_sifs_ack(struct ar9170 *ar);
diff --git a/drivers/net/wireless/ath/ar9170/led.c b/drivers/net/wireless/ath/ar9170/led.c
index 63fda6c..86c4e79 100644
--- a/drivers/net/wireless/ath/ar9170/led.c
+++ b/drivers/net/wireless/ath/ar9170/led.c
@@ -90,9 +90,12 @@
ar9170_set_leds_state(ar, led_val);
mutex_unlock(&ar->mutex);
- if (rerun)
- queue_delayed_work(ar->hw->workqueue, &ar->led_work,
- msecs_to_jiffies(blink_delay));
+ if (!rerun)
+ return;
+
+ ieee80211_queue_delayed_work(ar->hw,
+ &ar->led_work,
+ msecs_to_jiffies(blink_delay));
}
static void ar9170_led_brightness_set(struct led_classdev *led,
@@ -110,7 +113,7 @@
}
if (likely(IS_ACCEPTING_CMD(ar) && arl->toggled))
- queue_delayed_work(ar->hw->workqueue, &ar->led_work, HZ/10);
+ ieee80211_queue_delayed_work(ar->hw, &ar->led_work, HZ/10);
}
static int ar9170_register_led(struct ar9170 *ar, int i, char *name,
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index d9f1f46..614e321 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -238,39 +238,31 @@
return ar9170_regwrite_result();
}
-int ar9170_update_multicast(struct ar9170 *ar)
+int ar9170_update_multicast(struct ar9170 *ar, const u64 mc_hash)
{
int err;
ar9170_regwrite_begin(ar);
- ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_H,
- ar->want_mc_hash >> 32);
- ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_L,
- ar->want_mc_hash);
-
+ ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_H, mc_hash >> 32);
+ ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_L, mc_hash);
ar9170_regwrite_finish();
err = ar9170_regwrite_result();
-
if (err)
return err;
- ar->cur_mc_hash = ar->want_mc_hash;
-
+ ar->cur_mc_hash = mc_hash;
return 0;
}
-int ar9170_update_frame_filter(struct ar9170 *ar)
+int ar9170_update_frame_filter(struct ar9170 *ar, const u32 filter)
{
int err;
- err = ar9170_write_reg(ar, AR9170_MAC_REG_FRAMETYPE_FILTER,
- ar->want_filter);
-
+ err = ar9170_write_reg(ar, AR9170_MAC_REG_FRAMETYPE_FILTER, filter);
if (err)
return err;
- ar->cur_filter = ar->want_filter;
-
+ ar->cur_filter = filter;
return 0;
}
@@ -391,24 +383,26 @@
if (ar->vif) {
v |= ar->vif->bss_conf.beacon_int;
- switch (ar->vif->type) {
- case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_ADHOC:
- v |= BIT(25);
+ if (ar->enable_beacon) {
+ switch (ar->vif->type) {
+ case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_ADHOC:
+ v |= BIT(25);
+ break;
+ case NL80211_IFTYPE_AP:
+ v |= BIT(24);
+ pretbtt = (ar->vif->bss_conf.beacon_int - 6) <<
+ 16;
+ break;
+ default:
break;
- case NL80211_IFTYPE_AP:
- v |= BIT(24);
- pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
- break;
- default:
- break;
+ }
}
v |= ar->vif->bss_conf.dtim_period << 16;
}
ar9170_regwrite_begin(ar);
-
ar9170_regwrite(AR9170_MAC_REG_PRETBTT, pretbtt);
ar9170_regwrite(AR9170_MAC_REG_BCN_PERIOD, v);
ar9170_regwrite_finish();
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 88c3d85..c1f8c69 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -49,6 +49,10 @@
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+static int modparam_ht;
+module_param_named(ht, modparam_ht, bool, S_IRUGO);
+MODULE_PARM_DESC(ht, "enable MPDU aggregation.");
+
#define RATE(_bitrate, _hw_rate, _txpidx, _flags) { \
.bitrate = (_bitrate), \
.flags = (_flags), \
@@ -148,12 +152,15 @@
.cap = IEEE80211_HT_CAP_MAX_AMSDU | \
IEEE80211_HT_CAP_SUP_WIDTH_20_40 | \
IEEE80211_HT_CAP_SGI_40 | \
+ IEEE80211_HT_CAP_GRN_FLD | \
IEEE80211_HT_CAP_DSSSCCK40 | \
IEEE80211_HT_CAP_SM_PS, \
.ampdu_factor = 3, \
.ampdu_density = 6, \
.mcs = { \
- .rx_mask = { 0xFF, 0xFF, 0, 0, 0, 0, 0, 0, 0, 0, }, \
+ .rx_mask = { 0xff, 0xff, 0, 0, 0x1, 0, 0, 0, 0, 0, }, \
+ .rx_highest = cpu_to_le16(300), \
+ .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \
}, \
}
@@ -174,8 +181,31 @@
};
static void ar9170_tx(struct ar9170 *ar);
+static bool ar9170_tx_ampdu(struct ar9170 *ar);
-#ifdef AR9170_QUEUE_DEBUG
+static inline u16 ar9170_get_seq_h(struct ieee80211_hdr *hdr)
+{
+ return le16_to_cpu(hdr->seq_ctrl) >> 4;
+}
+
+static inline u16 ar9170_get_seq(struct sk_buff *skb)
+{
+ struct ar9170_tx_control *txc = (void *) skb->data;
+ return ar9170_get_seq_h((void *) txc->frame_data);
+}
+
+static inline u16 ar9170_get_tid(struct sk_buff *skb)
+{
+ struct ar9170_tx_control *txc = (void *) skb->data;
+ struct ieee80211_hdr *hdr = (void *) txc->frame_data;
+
+ return (ieee80211_get_qos_ctl(hdr))[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
+#define GET_NEXT_SEQ(seq) ((seq + 1) & 0x0fff)
+#define GET_NEXT_SEQ_FROM_SKB(skb) (GET_NEXT_SEQ(ar9170_get_seq(skb)))
+
+#if (defined AR9170_QUEUE_DEBUG) || (defined AR9170_TXAGG_DEBUG)
static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb)
{
struct ar9170_tx_control *txc = (void *) skb->data;
@@ -183,10 +213,10 @@
struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
struct ieee80211_hdr *hdr = (void *) txc->frame_data;
- printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] flags:%x "
+ printk(KERN_DEBUG "%s: => FRAME [skb:%p, q:%d, DA:[%pM] flags:%x s:%d "
"mac_ctrl:%04x, phy_ctrl:%08x, timeout:[%d ms]]\n",
wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb),
- ieee80211_get_DA(hdr), arinfo->flags,
+ ieee80211_get_DA(hdr), arinfo->flags, ar9170_get_seq_h(hdr),
le16_to_cpu(txc->mac_control), le32_to_cpu(txc->phy_control),
jiffies_to_msecs(arinfo->timeout - jiffies));
}
@@ -210,7 +240,9 @@
"mismatch %d != %d\n", skb_queue_len(queue), i);
printk(KERN_DEBUG "---[ end ]---\n");
}
+#endif /* AR9170_QUEUE_DEBUG || AR9170_TXAGG_DEBUG */
+#ifdef AR9170_QUEUE_DEBUG
static void ar9170_dump_txqueue(struct ar9170 *ar,
struct sk_buff_head *queue)
{
@@ -220,7 +252,9 @@
__ar9170_dump_txqueue(ar, queue);
spin_unlock_irqrestore(&queue->lock, flags);
}
+#endif /* AR9170_QUEUE_DEBUG */
+#ifdef AR9170_QUEUE_STOP_DEBUG
static void __ar9170_dump_txstats(struct ar9170 *ar)
{
int i;
@@ -229,20 +263,27 @@
wiphy_name(ar->hw->wiphy));
for (i = 0; i < __AR9170_NUM_TXQ; i++)
- printk(KERN_DEBUG "%s: queue:%d limit:%d len:%d waitack:%d\n",
- wiphy_name(ar->hw->wiphy), i, ar->tx_stats[i].limit,
- ar->tx_stats[i].len, skb_queue_len(&ar->tx_status[i]));
+ printk(KERN_DEBUG "%s: queue:%d limit:%d len:%d waitack:%d "
+ " stopped:%d\n", wiphy_name(ar->hw->wiphy), i,
+ ar->tx_stats[i].limit, ar->tx_stats[i].len,
+ skb_queue_len(&ar->tx_status[i]),
+ ieee80211_queue_stopped(ar->hw, i));
}
+#endif /* AR9170_QUEUE_STOP_DEBUG */
-static void ar9170_dump_txstats(struct ar9170 *ar)
+#ifdef AR9170_TXAGG_DEBUG
+static void ar9170_dump_tx_status_ampdu(struct ar9170 *ar)
{
unsigned long flags;
- spin_lock_irqsave(&ar->tx_stats_lock, flags);
- __ar9170_dump_txstats(ar);
- spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
+ spin_lock_irqsave(&ar->tx_status_ampdu.lock, flags);
+ printk(KERN_DEBUG "%s: A-MPDU tx_status queue => \n",
+ wiphy_name(ar->hw->wiphy));
+ __ar9170_dump_txqueue(ar, &ar->tx_status_ampdu);
+ spin_unlock_irqrestore(&ar->tx_status_ampdu.lock, flags);
}
-#endif /* AR9170_QUEUE_DEBUG */
+
+#endif /* AR9170_TXAGG_DEBUG */
/* caller must guarantee exclusive access for _bin_ queue. */
static void ar9170_recycle_expired(struct ar9170 *ar,
@@ -315,6 +356,70 @@
ieee80211_tx_status_irqsafe(ar->hw, skb);
}
+static void ar9170_tx_fake_ampdu_status(struct ar9170 *ar)
+{
+ struct sk_buff_head success;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned long queue_bitmap = 0;
+
+ skb_queue_head_init(&success);
+
+ while (skb_queue_len(&ar->tx_status_ampdu) > AR9170_NUM_TX_STATUS)
+ __skb_queue_tail(&success, skb_dequeue(&ar->tx_status_ampdu));
+
+ ar9170_recycle_expired(ar, &ar->tx_status_ampdu, &success);
+
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: collected %d A-MPDU frames.\n",
+ wiphy_name(ar->hw->wiphy), skb_queue_len(&success));
+ __ar9170_dump_txqueue(ar, &success);
+#endif /* AR9170_TXAGG_DEBUG */
+
+ while ((skb = __skb_dequeue(&success))) {
+ struct ieee80211_tx_info *txinfo;
+
+ queue_bitmap |= BIT(skb_get_queue_mapping(skb));
+
+ txinfo = IEEE80211_SKB_CB(skb);
+ ieee80211_tx_info_clear_status(txinfo);
+
+ txinfo->flags |= IEEE80211_TX_STAT_ACK;
+ txinfo->status.rates[0].count = 1;
+
+ skb_pull(skb, sizeof(struct ar9170_tx_control));
+ ieee80211_tx_status_irqsafe(ar->hw, skb);
+ }
+
+ for_each_bit(i, &queue_bitmap, BITS_PER_BYTE) {
+#ifdef AR9170_QUEUE_STOP_DEBUG
+ printk(KERN_DEBUG "%s: wake queue %d\n",
+ wiphy_name(ar->hw->wiphy), i);
+ __ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_STOP_DEBUG */
+ ieee80211_wake_queue(ar->hw, i);
+ }
+
+ if (queue_bitmap)
+ ar9170_tx(ar);
+}
+
+static void ar9170_tx_ampdu_callback(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+ struct ar9170_tx_info *arinfo = (void *) txinfo->rate_driver_data;
+
+ arinfo->timeout = jiffies +
+ msecs_to_jiffies(AR9170_BA_TIMEOUT);
+
+ skb_queue_tail(&ar->tx_status_ampdu, skb);
+ ar9170_tx_fake_ampdu_status(ar);
+ ar->tx_ampdu_pending--;
+
+ if (!list_empty(&ar->tx_ampdu_list) && !ar->tx_ampdu_pending)
+ ar9170_tx_ampdu(ar);
+}
+
void ar9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -336,7 +441,7 @@
spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
if (arinfo->flags & AR9170_TX_FLAG_BLOCK_ACK) {
- dev_kfree_skb_any(skb);
+ ar9170_tx_ampdu_callback(ar, skb);
} else if (arinfo->flags & AR9170_TX_FLAG_WAIT_FOR_ACK) {
arinfo->timeout = jiffies +
msecs_to_jiffies(AR9170_TX_TIMEOUT);
@@ -420,6 +525,38 @@
return NULL;
}
+static void ar9170_handle_block_ack(struct ar9170 *ar, u16 count, u16 r)
+{
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *txinfo;
+
+ while (count) {
+ skb = ar9170_get_queued_skb(ar, NULL, &ar->tx_status_ampdu, r);
+ if (!skb)
+ break;
+
+ txinfo = IEEE80211_SKB_CB(skb);
+ ieee80211_tx_info_clear_status(txinfo);
+
+ /* FIXME: maybe more ? */
+ txinfo->status.rates[0].count = 1;
+
+ skb_pull(skb, sizeof(struct ar9170_tx_control));
+ ieee80211_tx_status_irqsafe(ar->hw, skb);
+ count--;
+ }
+
+#ifdef AR9170_TXAGG_DEBUG
+ if (count) {
+ printk(KERN_DEBUG "%s: got %d more failed mpdus, but no more "
+ "suitable frames left in tx_status queue.\n",
+ wiphy_name(ar->hw->wiphy), count);
+
+ ar9170_dump_tx_status_ampdu(ar);
+ }
+#endif /* AR9170_TXAGG_DEBUG */
+}
+
/*
* This worker tries to keeps an maintain tx_status queues.
* So we can guarantee that incoming tx_status reports are
@@ -456,10 +593,14 @@
resched = true;
}
- if (resched)
- queue_delayed_work(ar->hw->workqueue,
- &ar->tx_janitor,
- msecs_to_jiffies(AR9170_JANITOR_DELAY));
+ ar9170_tx_fake_ampdu_status(ar);
+
+ if (!resched)
+ return;
+
+ ieee80211_queue_delayed_work(ar->hw,
+ &ar->tx_janitor,
+ msecs_to_jiffies(AR9170_JANITOR_DELAY));
}
void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
@@ -509,7 +650,7 @@
* pre-TBTT event
*/
if (ar->vif && ar->vif->type == NL80211_IFTYPE_AP)
- queue_work(ar->hw->workqueue, &ar->beacon_work);
+ ieee80211_queue_work(ar->hw, &ar->beacon_work);
break;
case 0xc2:
@@ -528,8 +669,15 @@
break;
case 0xc4:
+ /* BlockACK bitmap */
+ break;
+
case 0xc5:
/* BlockACK events */
+ ar9170_handle_block_ack(ar,
+ le16_to_cpu(cmd->ba_fail_cnt.failed),
+ le16_to_cpu(cmd->ba_fail_cnt.rate));
+ ar9170_tx_fake_ampdu_status(ar);
break;
case 0xc6:
@@ -917,8 +1065,10 @@
ar9170_rx_phy_status(ar, phy, &status);
skb = ar9170_rx_copy_data(buf, mpdu_len);
- if (likely(skb))
- ieee80211_rx_irqsafe(ar->hw, skb, &status);
+ if (likely(skb)) {
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx_irqsafe(ar->hw, skb);
+ }
}
void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
@@ -1082,8 +1232,6 @@
mutex_lock(&ar->mutex);
- ar->filter_changed = 0;
-
/* reinitialize queues statistics */
memset(&ar->tx_stats, 0, sizeof(ar->tx_stats));
for (i = 0; i < __AR9170_NUM_TXQ; i++)
@@ -1096,6 +1244,10 @@
AR9170_FILL_QUEUE(ar->edcf[3], 2, 3, 7, 47); /* VOICE */
AR9170_FILL_QUEUE(ar->edcf[4], 2, 3, 7, 0); /* SPECIAL */
+ /* set sane AMPDU defaults */
+ ar->global_ampdu_density = 6;
+ ar->global_ampdu_factor = 3;
+
ar->bad_hw_nagger = jiffies;
err = ar->open(ar);
@@ -1138,11 +1290,12 @@
if (IS_STARTED(ar))
ar->state = AR9170_IDLE;
- flush_workqueue(ar->hw->workqueue);
-
cancel_delayed_work_sync(&ar->tx_janitor);
- cancel_work_sync(&ar->filter_config_work);
+#ifdef CONFIG_AR9170_LEDS
+ cancel_delayed_work_sync(&ar->led_work);
+#endif
cancel_work_sync(&ar->beacon_work);
+
mutex_lock(&ar->mutex);
if (IS_ACCEPTING_CMD(ar)) {
@@ -1157,9 +1310,40 @@
skb_queue_purge(&ar->tx_pending[i]);
skb_queue_purge(&ar->tx_status[i]);
}
+ skb_queue_purge(&ar->tx_status_ampdu);
+
mutex_unlock(&ar->mutex);
}
+static void ar9170_tx_indicate_immba(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ar9170_tx_control *txc = (void *) skb->data;
+
+ txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_IMM_AMPDU);
+}
+
+static void ar9170_tx_copy_phy(struct ar9170 *ar, struct sk_buff *dst,
+ struct sk_buff *src)
+{
+ struct ar9170_tx_control *dst_txc, *src_txc;
+ struct ieee80211_tx_info *dst_info, *src_info;
+ struct ar9170_tx_info *dst_arinfo, *src_arinfo;
+
+ src_txc = (void *) src->data;
+ src_info = IEEE80211_SKB_CB(src);
+ src_arinfo = (void *) src_info->rate_driver_data;
+
+ dst_txc = (void *) dst->data;
+ dst_info = IEEE80211_SKB_CB(dst);
+ dst_arinfo = (void *) dst_info->rate_driver_data;
+
+ dst_txc->phy_control = src_txc->phy_control;
+
+ /* same MCS for the whole aggregate */
+ memcpy(dst_info->driver_rates, src_info->driver_rates,
+ sizeof(dst_info->driver_rates));
+}
+
static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr;
@@ -1228,6 +1412,7 @@
txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
arinfo->flags = AR9170_TX_FLAG_BLOCK_ACK;
+
goto out;
}
@@ -1358,6 +1543,159 @@
txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT);
}
+static bool ar9170_tx_ampdu(struct ar9170 *ar)
+{
+ struct sk_buff_head agg;
+ struct ar9170_sta_tid *tid_info = NULL, *tmp;
+ struct sk_buff *skb, *first = NULL;
+ unsigned long flags, f2;
+ unsigned int i = 0;
+ u16 seq, queue, tmpssn;
+ bool run = false;
+
+ skb_queue_head_init(&agg);
+
+ spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
+ if (list_empty(&ar->tx_ampdu_list)) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: aggregation list is empty.\n",
+ wiphy_name(ar->hw->wiphy));
+#endif /* AR9170_TXAGG_DEBUG */
+ goto out_unlock;
+ }
+
+ list_for_each_entry_safe(tid_info, tmp, &ar->tx_ampdu_list, list) {
+ if (tid_info->state != AR9170_TID_STATE_COMPLETE) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: dangling aggregation entry!\n",
+ wiphy_name(ar->hw->wiphy));
+#endif /* AR9170_TXAGG_DEBUG */
+ continue;
+ }
+
+ if (++i > 64) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: enough frames aggregated.\n",
+ wiphy_name(ar->hw->wiphy));
+#endif /* AR9170_TXAGG_DEBUG */
+ break;
+ }
+
+ queue = TID_TO_WME_AC(tid_info->tid);
+
+ if (skb_queue_len(&ar->tx_pending[queue]) >=
+ AR9170_NUM_TX_AGG_MAX) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: queue %d full.\n",
+ wiphy_name(ar->hw->wiphy), queue);
+#endif /* AR9170_TXAGG_DEBUG */
+ continue;
+ }
+
+ list_del_init(&tid_info->list);
+
+ spin_lock_irqsave(&tid_info->queue.lock, f2);
+ tmpssn = seq = tid_info->ssn;
+ first = skb_peek(&tid_info->queue);
+
+ if (likely(first))
+ tmpssn = ar9170_get_seq(first);
+
+ if (unlikely(tmpssn != seq)) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: ssn mismatch [%d != %d]\n.",
+ wiphy_name(ar->hw->wiphy), seq, tmpssn);
+#endif /* AR9170_TXAGG_DEBUG */
+ tid_info->ssn = tmpssn;
+ }
+
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: generate A-MPDU for tid:%d ssn:%d with "
+ "%d queued frames.\n", wiphy_name(ar->hw->wiphy),
+ tid_info->tid, tid_info->ssn,
+ skb_queue_len(&tid_info->queue));
+ __ar9170_dump_txqueue(ar, &tid_info->queue);
+#endif /* AR9170_TXAGG_DEBUG */
+
+ while ((skb = skb_peek(&tid_info->queue))) {
+ if (unlikely(ar9170_get_seq(skb) != seq))
+ break;
+
+ __skb_unlink(skb, &tid_info->queue);
+ tid_info->ssn = seq = GET_NEXT_SEQ(seq);
+
+ if (unlikely(skb_get_queue_mapping(skb) != queue)) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: tid:%d(q:%d) queue:%d "
+ "!match.\n", wiphy_name(ar->hw->wiphy),
+ tid_info->tid,
+ TID_TO_WME_AC(tid_info->tid),
+ skb_get_queue_mapping(skb));
+#endif /* AR9170_TXAGG_DEBUG */
+ dev_kfree_skb_any(skb);
+ continue;
+ }
+
+ if (unlikely(first == skb)) {
+ ar9170_tx_prepare_phy(ar, skb);
+ __skb_queue_tail(&agg, skb);
+ first = skb;
+ } else {
+ ar9170_tx_copy_phy(ar, skb, first);
+ __skb_queue_tail(&agg, skb);
+ }
+
+ if (unlikely(skb_queue_len(&agg) ==
+ AR9170_NUM_TX_AGG_MAX))
+ break;
+ }
+
+ if (skb_queue_empty(&tid_info->queue))
+ tid_info->active = false;
+ else
+ list_add_tail(&tid_info->list,
+ &ar->tx_ampdu_list);
+
+ spin_unlock_irqrestore(&tid_info->queue.lock, f2);
+
+ if (unlikely(skb_queue_empty(&agg))) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: queued empty list!\n",
+ wiphy_name(ar->hw->wiphy));
+#endif /* AR9170_TXAGG_DEBUG */
+ continue;
+ }
+
+ /*
+ * tell the FW/HW that this is the last frame,
+ * that way it will wait for the immediate block ack.
+ */
+ if (likely(skb_peek_tail(&agg)))
+ ar9170_tx_indicate_immba(ar, skb_peek_tail(&agg));
+
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: generated A-MPDU looks like this:\n",
+ wiphy_name(ar->hw->wiphy));
+ __ar9170_dump_txqueue(ar, &agg);
+#endif /* AR9170_TXAGG_DEBUG */
+
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+
+ spin_lock_irqsave(&ar->tx_pending[queue].lock, flags);
+ skb_queue_splice_tail_init(&agg, &ar->tx_pending[queue]);
+ spin_unlock_irqrestore(&ar->tx_pending[queue].lock, flags);
+ run = true;
+
+ spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
+ }
+
+out_unlock:
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+ __skb_queue_purge(&agg);
+
+ return run;
+}
+
static void ar9170_tx(struct ar9170 *ar)
{
struct sk_buff *skb;
@@ -1382,11 +1720,17 @@
printk(KERN_DEBUG "%s: queue %d full\n",
wiphy_name(ar->hw->wiphy), i);
- __ar9170_dump_txstats(ar);
- printk(KERN_DEBUG "stuck frames: ===> \n");
+ printk(KERN_DEBUG "%s: stuck frames: ===> \n",
+ wiphy_name(ar->hw->wiphy));
ar9170_dump_txqueue(ar, &ar->tx_pending[i]);
ar9170_dump_txqueue(ar, &ar->tx_status[i]);
#endif /* AR9170_QUEUE_DEBUG */
+
+#ifdef AR9170_QUEUE_STOP_DEBUG
+ printk(KERN_DEBUG "%s: stop queue %d\n",
+ wiphy_name(ar->hw->wiphy), i);
+ __ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_STOP_DEBUG */
ieee80211_stop_queue(ar->hw, i);
spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
continue;
@@ -1401,8 +1745,6 @@
"remaining slots:%d, needed:%d\n",
wiphy_name(ar->hw->wiphy), i, remaining_space,
frames);
-
- ar9170_dump_txstats(ar);
#endif /* AR9170_QUEUE_DEBUG */
frames = remaining_space;
}
@@ -1430,6 +1772,9 @@
arinfo->timeout = jiffies +
msecs_to_jiffies(AR9170_TX_TIMEOUT);
+ if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
+ ar->tx_ampdu_pending++;
+
#ifdef AR9170_QUEUE_DEBUG
printk(KERN_DEBUG "%s: send frame q:%d =>\n",
wiphy_name(ar->hw->wiphy), i);
@@ -1438,6 +1783,9 @@
err = ar->tx(ar, skb);
if (unlikely(err)) {
+ if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
+ ar->tx_ampdu_pending--;
+
frames_failed++;
dev_kfree_skb_any(skb);
} else {
@@ -1459,22 +1807,113 @@
if (unlikely(frames_failed)) {
#ifdef AR9170_QUEUE_DEBUG
- printk(KERN_DEBUG "%s: frames failed =>\n",
+ printk(KERN_DEBUG "%s: frames failed %d =>\n",
wiphy_name(ar->hw->wiphy), frames_failed);
#endif /* AR9170_QUEUE_DEBUG */
spin_lock_irqsave(&ar->tx_stats_lock, flags);
ar->tx_stats[i].len -= frames_failed;
ar->tx_stats[i].count -= frames_failed;
+#ifdef AR9170_QUEUE_STOP_DEBUG
+ printk(KERN_DEBUG "%s: wake queue %d\n",
+ wiphy_name(ar->hw->wiphy), i);
+ __ar9170_dump_txstats(ar);
+#endif /* AR9170_QUEUE_STOP_DEBUG */
ieee80211_wake_queue(ar->hw, i);
spin_unlock_irqrestore(&ar->tx_stats_lock, flags);
}
}
- if (schedule_garbagecollector)
- queue_delayed_work(ar->hw->workqueue,
- &ar->tx_janitor,
- msecs_to_jiffies(AR9170_JANITOR_DELAY));
+ if (!schedule_garbagecollector)
+ return;
+
+ ieee80211_queue_delayed_work(ar->hw,
+ &ar->tx_janitor,
+ msecs_to_jiffies(AR9170_JANITOR_DELAY));
+}
+
+static bool ar9170_tx_ampdu_queue(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *txinfo;
+ struct ar9170_sta_info *sta_info;
+ struct ar9170_sta_tid *agg;
+ struct sk_buff *iter;
+ unsigned long flags, f2;
+ unsigned int max;
+ u16 tid, seq, qseq;
+ bool run = false, queue = false;
+
+ tid = ar9170_get_tid(skb);
+ seq = ar9170_get_seq(skb);
+ txinfo = IEEE80211_SKB_CB(skb);
+ sta_info = (void *) txinfo->control.sta->drv_priv;
+ agg = &sta_info->agg[tid];
+ max = sta_info->ampdu_max_len;
+
+ spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
+
+ if (unlikely(agg->state != AR9170_TID_STATE_COMPLETE)) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: BlockACK session not fully initialized "
+ "for ESS:%pM tid:%d state:%d.\n",
+ wiphy_name(ar->hw->wiphy), agg->addr, agg->tid,
+ agg->state);
+#endif /* AR9170_TXAGG_DEBUG */
+ goto err_unlock;
+ }
+
+ if (!agg->active) {
+ agg->active = true;
+ agg->ssn = seq;
+ queue = true;
+ }
+
+ /* check if seq is within the BA window */
+ if (unlikely(!BAW_WITHIN(agg->ssn, max, seq))) {
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: frame with tid:%d seq:%d does not "
+ "fit into BA window (%d - %d)\n",
+ wiphy_name(ar->hw->wiphy), tid, seq, agg->ssn,
+ (agg->ssn + max) & 0xfff);
+#endif /* AR9170_TXAGG_DEBUG */
+ goto err_unlock;
+ }
+
+ spin_lock_irqsave(&agg->queue.lock, f2);
+
+ skb_queue_reverse_walk(&agg->queue, iter) {
+ qseq = ar9170_get_seq(iter);
+
+ if (GET_NEXT_SEQ(qseq) == seq) {
+ __skb_queue_after(&agg->queue, iter, skb);
+ goto queued;
+ }
+ }
+
+ __skb_queue_head(&agg->queue, skb);
+
+queued:
+ spin_unlock_irqrestore(&agg->queue.lock, f2);
+
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_DEBUG "%s: new aggregate %p queued.\n",
+ wiphy_name(ar->hw->wiphy), skb);
+ __ar9170_dump_txqueue(ar, &agg->queue);
+#endif /* AR9170_TXAGG_DEBUG */
+
+ if (skb_queue_len(&agg->queue) >= AR9170_NUM_TX_AGG_MAX)
+ run = true;
+
+ if (queue)
+ list_add_tail(&agg->list, &ar->tx_ampdu_list);
+
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+ return run;
+
+err_unlock:
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+ dev_kfree_skb_irq(skb);
+ return false;
}
int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
@@ -1490,8 +1929,10 @@
info = IEEE80211_SKB_CB(skb);
if (info->flags & IEEE80211_TX_CTL_AMPDU) {
- /* drop frame, we do not allow TX A-MPDU aggregation yet. */
- goto err_free;
+ bool run = ar9170_tx_ampdu_queue(ar, skb);
+
+ if (run || !ar->tx_ampdu_pending)
+ ar9170_tx_ampdu(ar);
} else {
unsigned int queue = skb_get_queue_mapping(skb);
@@ -1529,8 +1970,7 @@
}
ar->cur_filter = 0;
- ar->want_filter = AR9170_MAC_REG_FTF_DEFAULTS;
- err = ar9170_update_frame_filter(ar);
+ err = ar9170_update_frame_filter(ar, AR9170_MAC_REG_FTF_DEFAULTS);
if (err)
goto unlock;
@@ -1548,8 +1988,7 @@
mutex_lock(&ar->mutex);
ar->vif = NULL;
- ar->want_filter = 0;
- ar9170_update_frame_filter(ar);
+ ar9170_update_frame_filter(ar, 0);
ar9170_set_beacon_timers(ar);
dev_kfree_skb(ar->beacon);
ar->beacon = NULL;
@@ -1592,12 +2031,6 @@
goto out;
}
- if (changed & BSS_CHANGED_BEACON_INT) {
- err = ar9170_set_beacon_timers(ar);
- if (err)
- goto out;
- }
-
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
/* adjust slot time for 5 GHz */
@@ -1621,48 +2054,37 @@
return err;
}
-static void ar9170_set_filters(struct work_struct *work)
+static u64 ar9170_op_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
+ struct dev_addr_list *mclist)
{
- struct ar9170 *ar = container_of(work, struct ar9170,
- filter_config_work);
- int err;
+ u64 mchash;
+ int i;
- if (unlikely(!IS_STARTED(ar)))
- return ;
+ /* always get broadcast frames */
+ mchash = 1ULL << (0xff >> 2);
- mutex_lock(&ar->mutex);
- if (test_and_clear_bit(AR9170_FILTER_CHANGED_MODE,
- &ar->filter_changed)) {
- err = ar9170_set_operating_mode(ar);
- if (err)
- goto unlock;
+ for (i = 0; i < mc_count; i++) {
+ if (WARN_ON(!mclist))
+ break;
+ mchash |= 1ULL << (mclist->dmi_addr[5] >> 2);
+ mclist = mclist->next;
}
- if (test_and_clear_bit(AR9170_FILTER_CHANGED_MULTICAST,
- &ar->filter_changed)) {
- err = ar9170_update_multicast(ar);
- if (err)
- goto unlock;
- }
-
- if (test_and_clear_bit(AR9170_FILTER_CHANGED_FRAMEFILTER,
- &ar->filter_changed)) {
- err = ar9170_update_frame_filter(ar);
- if (err)
- goto unlock;
- }
-
-unlock:
- mutex_unlock(&ar->mutex);
+ return mchash;
}
static void ar9170_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags,
- int mc_count, struct dev_mc_list *mclist)
+ u64 multicast)
{
struct ar9170 *ar = hw->priv;
+ if (unlikely(!IS_ACCEPTING_CMD(ar)))
+ return ;
+
+ mutex_lock(&ar->mutex);
+
/* mask supported flags */
*new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC |
FIF_PROMISC_IN_BSS | FIF_FCSFAIL | FIF_PLCPFAIL;
@@ -1672,26 +2094,11 @@
* then checking the error flags, later.
*/
- if (changed_flags & FIF_ALLMULTI) {
- if (*new_flags & FIF_ALLMULTI) {
- ar->want_mc_hash = ~0ULL;
- } else {
- u64 mchash;
- int i;
+ if (changed_flags & FIF_ALLMULTI && *new_flags & FIF_ALLMULTI)
+ multicast = ~0ULL;
- /* always get broadcast frames */
- mchash = 1ULL << (0xff >> 2);
-
- for (i = 0; i < mc_count; i++) {
- if (WARN_ON(!mclist))
- break;
- mchash |= 1ULL << (mclist->dmi_addr[5] >> 2);
- mclist = mclist->next;
- }
- ar->want_mc_hash = mchash;
- }
- set_bit(AR9170_FILTER_CHANGED_MULTICAST, &ar->filter_changed);
- }
+ if (multicast != ar->cur_mc_hash)
+ ar9170_update_multicast(ar, multicast);
if (changed_flags & FIF_CONTROL) {
u32 filter = AR9170_MAC_REG_FTF_PSPOLL |
@@ -1702,24 +2109,22 @@
AR9170_MAC_REG_FTF_CFE_ACK;
if (*new_flags & FIF_CONTROL)
- ar->want_filter = ar->cur_filter | filter;
+ filter |= ar->cur_filter;
else
- ar->want_filter = ar->cur_filter & ~filter;
+ filter &= (~ar->cur_filter);
- set_bit(AR9170_FILTER_CHANGED_FRAMEFILTER,
- &ar->filter_changed);
+ ar9170_update_frame_filter(ar, filter);
}
if (changed_flags & FIF_PROMISC_IN_BSS) {
ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0;
- set_bit(AR9170_FILTER_CHANGED_MODE,
- &ar->filter_changed);
+ ar9170_set_operating_mode(ar);
}
- if (likely(IS_STARTED(ar)))
- queue_work(ar->hw->workqueue, &ar->filter_config_work);
+ mutex_unlock(&ar->mutex);
}
+
static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
@@ -1737,11 +2142,17 @@
goto out;
}
- if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) {
+ if (changed & BSS_CHANGED_BEACON_ENABLED)
+ ar->enable_beacon = bss_conf->enable_beacon;
+
+ if (changed & BSS_CHANGED_BEACON) {
err = ar9170_update_beacon(ar);
if (err)
goto out;
+ }
+ if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON |
+ BSS_CHANGED_BEACON_INT)) {
err = ar9170_set_beacon_timers(ar);
if (err)
goto out;
@@ -1754,12 +2165,6 @@
#endif /* CONFIG_AR9170_LEDS */
}
- if (changed & BSS_CHANGED_BEACON_INT) {
- err = ar9170_set_beacon_timers(ar);
- if (err)
- goto out;
- }
-
if (changed & BSS_CHANGED_HT) {
/* TODO */
err = 0;
@@ -1929,6 +2334,50 @@
enum sta_notify_cmd cmd,
struct ieee80211_sta *sta)
{
+ struct ar9170 *ar = hw->priv;
+ struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
+ unsigned int i;
+
+ switch (cmd) {
+ case STA_NOTIFY_ADD:
+ memset(sta_info, 0, sizeof(*sta_info));
+
+ if (!sta->ht_cap.ht_supported)
+ break;
+
+ if (sta->ht_cap.ampdu_density > ar->global_ampdu_density)
+ ar->global_ampdu_density = sta->ht_cap.ampdu_density;
+
+ if (sta->ht_cap.ampdu_factor < ar->global_ampdu_factor)
+ ar->global_ampdu_factor = sta->ht_cap.ampdu_factor;
+
+ for (i = 0; i < AR9170_NUM_TID; i++) {
+ sta_info->agg[i].state = AR9170_TID_STATE_SHUTDOWN;
+ sta_info->agg[i].active = false;
+ sta_info->agg[i].ssn = 0;
+ sta_info->agg[i].retry = 0;
+ sta_info->agg[i].tid = i;
+ INIT_LIST_HEAD(&sta_info->agg[i].list);
+ skb_queue_head_init(&sta_info->agg[i].queue);
+ }
+
+ sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor);
+ break;
+
+ case STA_NOTIFY_REMOVE:
+ if (!sta->ht_cap.ht_supported)
+ break;
+
+ for (i = 0; i < AR9170_NUM_TID; i++) {
+ sta_info->agg[i].state = AR9170_TID_STATE_INVALID;
+ skb_queue_purge(&sta_info->agg[i].queue);
+ }
+
+ break;
+
+ default:
+ break;
+ }
}
static int ar9170_get_stats(struct ieee80211_hw *hw,
@@ -1984,18 +2433,65 @@
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn)
{
+ struct ar9170 *ar = hw->priv;
+ struct ar9170_sta_info *sta_info = (void *) sta->drv_priv;
+ struct ar9170_sta_tid *tid_info = &sta_info->agg[tid];
+ unsigned long flags;
+
+ if (!modparam_ht)
+ return -EOPNOTSUPP;
+
switch (action) {
+ case IEEE80211_AMPDU_TX_START:
+ spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
+ if (tid_info->state != AR9170_TID_STATE_SHUTDOWN ||
+ !list_empty(&tid_info->list)) {
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_INFO "%s: A-MPDU [ESS:[%pM] tid:[%d]] "
+ "is in a very bad state!\n",
+ wiphy_name(hw->wiphy), sta->addr, tid);
+#endif /* AR9170_TXAGG_DEBUG */
+ return -EBUSY;
+ }
+
+ *ssn = tid_info->ssn;
+ tid_info->state = AR9170_TID_STATE_PROGRESS;
+ tid_info->active = false;
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+ ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+ break;
+
+ case IEEE80211_AMPDU_TX_STOP:
+ spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
+ tid_info->state = AR9170_TID_STATE_SHUTDOWN;
+ list_del_init(&tid_info->list);
+ tid_info->active = false;
+ skb_queue_purge(&tid_info->queue);
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+ ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+ break;
+
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+#ifdef AR9170_TXAGG_DEBUG
+ printk(KERN_INFO "%s: A-MPDU for %pM [tid:%d] Operational.\n",
+ wiphy_name(hw->wiphy), sta->addr, tid);
+#endif /* AR9170_TXAGG_DEBUG */
+ spin_lock_irqsave(&ar->tx_ampdu_list_lock, flags);
+ sta_info->agg[tid].state = AR9170_TID_STATE_COMPLETE;
+ spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
+ break;
+
case IEEE80211_AMPDU_RX_START:
case IEEE80211_AMPDU_RX_STOP:
- /*
- * Something goes wrong -- RX locks up
- * after a while of receiving aggregated
- * frames -- not enabling for now.
- */
- return -EOPNOTSUPP;
+ /* Handled by firmware */
+ break;
+
default:
return -EOPNOTSUPP;
}
+
+ return 0;
}
static const struct ieee80211_ops ar9170_ops = {
@@ -2005,6 +2501,7 @@
.add_interface = ar9170_op_add_interface,
.remove_interface = ar9170_op_remove_interface,
.config = ar9170_op_config,
+ .prepare_multicast = ar9170_op_prepare_multicast,
.configure_filter = ar9170_op_configure_filter,
.conf_tx = ar9170_conf_tx,
.bss_info_changed = ar9170_op_bss_info_changed,
@@ -2044,14 +2541,16 @@
mutex_init(&ar->mutex);
spin_lock_init(&ar->cmdlock);
spin_lock_init(&ar->tx_stats_lock);
+ spin_lock_init(&ar->tx_ampdu_list_lock);
+ skb_queue_head_init(&ar->tx_status_ampdu);
for (i = 0; i < __AR9170_NUM_TXQ; i++) {
skb_queue_head_init(&ar->tx_status[i]);
skb_queue_head_init(&ar->tx_pending[i]);
}
ar9170_rx_reset_rx_mpdu(ar);
- INIT_WORK(&ar->filter_config_work, ar9170_set_filters);
INIT_WORK(&ar->beacon_work, ar9170_new_beacon);
INIT_DELAYED_WORK(&ar->tx_janitor, ar9170_tx_janitor);
+ INIT_LIST_HEAD(&ar->tx_ampdu_list);
/* all hw supports 2.4 GHz, so set channel to 1 by default */
ar->channel = &ar9170_2ghz_chantable[0];
@@ -2065,6 +2564,13 @@
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
+ if (modparam_ht) {
+ ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+ } else {
+ ar9170_band_2GHz.ht_cap.ht_supported = false;
+ ar9170_band_5GHz.ht_cap.ht_supported = false;
+ }
+
ar->hw->queues = __AR9170_NUM_TXQ;
ar->hw->extra_tx_headroom = 8;
ar->hw->sta_data_size = sizeof(struct ar9170_sta_info);
@@ -2086,10 +2592,11 @@
{
#define RW 8 /* number of words to read at once */
#define RB (sizeof(u32) * RW)
- DECLARE_MAC_BUF(mbuf);
+ struct ath_regulatory *regulatory = &ar->common.regulatory;
u8 *eeprom = (void *)&ar->eeprom;
u8 *addr = ar->eeprom.mac_address;
__le32 offsets[RW];
+ unsigned int rx_streams, tx_streams, tx_params = 0;
int i, j, err, bands = 0;
BUILD_BUG_ON(sizeof(ar->eeprom) & 3);
@@ -2126,6 +2633,20 @@
ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &ar9170_band_5GHz;
bands++;
}
+
+ rx_streams = hweight8(ar->eeprom.rx_mask);
+ tx_streams = hweight8(ar->eeprom.tx_mask);
+
+ if (rx_streams != tx_streams)
+ tx_params = IEEE80211_HT_MCS_TX_RX_DIFF;
+
+ if (tx_streams >= 1 && tx_streams <= IEEE80211_HT_MCS_TX_MAX_STREAMS)
+ tx_params = (tx_streams - 1) <<
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+
+ ar9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params;
+ ar9170_band_5GHz.ht_cap.mcs.tx_params |= tx_params;
+
/*
* I measured this, a bandswitch takes roughly
* 135 ms and a frequency switch about 80.
@@ -2138,8 +2659,8 @@
else
ar->hw->channel_change_time = 80 * 1000;
- ar->regulatory.current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]);
- ar->regulatory.current_rd_ext = le16_to_cpu(ar->eeprom.reg_domain[1]);
+ regulatory->current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]);
+ regulatory->current_rd_ext = le16_to_cpu(ar->eeprom.reg_domain[1]);
/* second part of wiphy init */
SET_IEEE80211_PERM_ADDR(ar->hw, addr);
@@ -2153,11 +2674,12 @@
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct ar9170 *ar = hw->priv;
- return ath_reg_notifier_apply(wiphy, request, &ar->regulatory);
+ return ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory);
}
int ar9170_register(struct ar9170 *ar, struct device *pdev)
{
+ struct ath_regulatory *regulatory = &ar->common.regulatory;
int err;
/* try to read EEPROM, init MAC addr */
@@ -2165,7 +2687,7 @@
if (err)
goto err_out;
- err = ath_regd_init(&ar->regulatory, ar->hw->wiphy,
+ err = ath_regd_init(regulatory, ar->hw->wiphy,
ar9170_reg_notifier);
if (err)
goto err_out;
@@ -2174,8 +2696,8 @@
if (err)
goto err_out;
- if (!ath_is_world_regd(&ar->regulatory))
- regulatory_hint(ar->hw->wiphy, ar->regulatory.alpha2);
+ if (!ath_is_world_regd(regulatory))
+ regulatory_hint(ar->hw->wiphy, regulatory->alpha2);
err = ar9170_init_leds(ar);
if (err)
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index df86f70..b3e5cf3 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -396,6 +396,136 @@
{ 0x1c9384, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, }
};
+/*
+ * look up a certain register in ar5416_phy_init[] and return the init. value
+ * for the band and bandwidth given. Return 0 if register address not found.
+ */
+static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)
+{
+ unsigned int i;
+ for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) {
+ if (ar5416_phy_init[i].reg != reg)
+ continue;
+
+ if (is_2ghz) {
+ if (is_40mhz)
+ return ar5416_phy_init[i]._2ghz_40;
+ else
+ return ar5416_phy_init[i]._2ghz_20;
+ } else {
+ if (is_40mhz)
+ return ar5416_phy_init[i]._5ghz_40;
+ else
+ return ar5416_phy_init[i]._5ghz_20;
+ }
+ }
+ return 0;
+}
+
+/*
+ * initialize some phy regs from eeprom values in modal_header[]
+ * acc. to band and bandwith
+ */
+static int ar9170_init_phy_from_eeprom(struct ar9170 *ar,
+ bool is_2ghz, bool is_40mhz)
+{
+ static const u8 xpd2pd[16] = {
+ 0x2, 0x2, 0x2, 0x1, 0x2, 0x2, 0x6, 0x2,
+ 0x2, 0x3, 0x7, 0x2, 0xB, 0x2, 0x2, 0x2
+ };
+ u32 defval, newval;
+ /* pointer to the modal_header acc. to band */
+ struct ar9170_eeprom_modal *m = &ar->eeprom.modal_header[is_2ghz];
+
+ ar9170_regwrite_begin(ar);
+
+ /* ant common control (index 0) */
+ newval = le32_to_cpu(m->antCtrlCommon);
+ ar9170_regwrite(0x1c5964, newval);
+
+ /* ant control chain 0 (index 1) */
+ newval = le32_to_cpu(m->antCtrlChain[0]);
+ ar9170_regwrite(0x1c5960, newval);
+
+ /* ant control chain 2 (index 2) */
+ newval = le32_to_cpu(m->antCtrlChain[1]);
+ ar9170_regwrite(0x1c7960, newval);
+
+ /* SwSettle (index 3) */
+ if (!is_40mhz) {
+ defval = ar9170_get_default_phy_reg_val(0x1c5844,
+ is_2ghz, is_40mhz);
+ newval = (defval & ~0x3f80) |
+ ((m->switchSettling & 0x7f) << 7);
+ ar9170_regwrite(0x1c5844, newval);
+ }
+
+ /* adcDesired, pdaDesired (index 4) */
+ defval = ar9170_get_default_phy_reg_val(0x1c5850, is_2ghz, is_40mhz);
+ newval = (defval & ~0xffff) | ((u8)m->pgaDesiredSize << 8) |
+ ((u8)m->adcDesiredSize);
+ ar9170_regwrite(0x1c5850, newval);
+
+ /* TxEndToXpaOff, TxFrameToXpaOn (index 5) */
+ defval = ar9170_get_default_phy_reg_val(0x1c5834, is_2ghz, is_40mhz);
+ newval = (m->txEndToXpaOff << 24) | (m->txEndToXpaOff << 16) |
+ (m->txFrameToXpaOn << 8) | m->txFrameToXpaOn;
+ ar9170_regwrite(0x1c5834, newval);
+
+ /* TxEndToRxOn (index 6) */
+ defval = ar9170_get_default_phy_reg_val(0x1c5828, is_2ghz, is_40mhz);
+ newval = (defval & ~0xff0000) | (m->txEndToRxOn << 16);
+ ar9170_regwrite(0x1c5828, newval);
+
+ /* thresh62 (index 7) */
+ defval = ar9170_get_default_phy_reg_val(0x1c8864, is_2ghz, is_40mhz);
+ newval = (defval & ~0x7f000) | (m->thresh62 << 12);
+ ar9170_regwrite(0x1c8864, newval);
+
+ /* tx/rx attenuation chain 0 (index 8) */
+ defval = ar9170_get_default_phy_reg_val(0x1c5848, is_2ghz, is_40mhz);
+ newval = (defval & ~0x3f000) | ((m->txRxAttenCh[0] & 0x3f) << 12);
+ ar9170_regwrite(0x1c5848, newval);
+
+ /* tx/rx attenuation chain 2 (index 9) */
+ defval = ar9170_get_default_phy_reg_val(0x1c7848, is_2ghz, is_40mhz);
+ newval = (defval & ~0x3f000) | ((m->txRxAttenCh[1] & 0x3f) << 12);
+ ar9170_regwrite(0x1c7848, newval);
+
+ /* tx/rx margin chain 0 (index 10) */
+ defval = ar9170_get_default_phy_reg_val(0x1c620c, is_2ghz, is_40mhz);
+ newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[0] & 0x3f) << 18);
+ /* bsw margin chain 0 for 5GHz only */
+ if (!is_2ghz)
+ newval = (newval & ~0x3c00) | ((m->bswMargin[0] & 0xf) << 10);
+ ar9170_regwrite(0x1c620c, newval);
+
+ /* tx/rx margin chain 2 (index 11) */
+ defval = ar9170_get_default_phy_reg_val(0x1c820c, is_2ghz, is_40mhz);
+ newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[1] & 0x3f) << 18);
+ ar9170_regwrite(0x1c820c, newval);
+
+ /* iqCall, iqCallq chain 0 (index 12) */
+ defval = ar9170_get_default_phy_reg_val(0x1c5920, is_2ghz, is_40mhz);
+ newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[0] & 0x3f) << 5) |
+ ((u8)m->iqCalQCh[0] & 0x1f);
+ ar9170_regwrite(0x1c5920, newval);
+
+ /* iqCall, iqCallq chain 2 (index 13) */
+ defval = ar9170_get_default_phy_reg_val(0x1c7920, is_2ghz, is_40mhz);
+ newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[1] & 0x3f) << 5) |
+ ((u8)m->iqCalQCh[1] & 0x1f);
+ ar9170_regwrite(0x1c7920, newval);
+
+ /* xpd gain mask (index 14) */
+ defval = ar9170_get_default_phy_reg_val(0x1c6258, is_2ghz, is_40mhz);
+ newval = (defval & ~0xf0000) | (xpd2pd[m->xpdGain & 0xf] << 16);
+ ar9170_regwrite(0x1c6258, newval);
+ ar9170_regwrite_finish();
+
+ return ar9170_regwrite_result();
+}
+
int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
{
int i, err;
@@ -426,7 +556,9 @@
if (err)
return err;
- /* XXX: use EEPROM data here! */
+ err = ar9170_init_phy_from_eeprom(ar, is_2ghz, is_40mhz);
+ if (err)
+ return err;
err = ar9170_init_power_cal(ar);
if (err)
@@ -987,6 +1119,282 @@
#undef SHIFT
}
+static u8 ar9170_interpolate_val(u8 x, u8 *x_array, u8 *y_array)
+{
+ int i;
+
+ for (i = 0; i < 3; i++)
+ if (x <= x_array[i + 1])
+ break;
+
+ return ar9170_interpolate_u8(x,
+ x_array[i],
+ y_array[i],
+ x_array[i + 1],
+ y_array[i + 1]);
+}
+
+static int ar9170_set_freq_cal_data(struct ar9170 *ar,
+ struct ieee80211_channel *channel)
+{
+ u8 *cal_freq_pier;
+ u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
+ u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
+ int chain, idx, i;
+ u8 f;
+
+ switch (channel->band) {
+ case IEEE80211_BAND_2GHZ:
+ f = channel->center_freq - 2300;
+ cal_freq_pier = ar->eeprom.cal_freq_pier_2G;
+ i = AR5416_NUM_2G_CAL_PIERS - 1;
+ break;
+
+ case IEEE80211_BAND_5GHZ:
+ f = (channel->center_freq - 4800) / 5;
+ cal_freq_pier = ar->eeprom.cal_freq_pier_5G;
+ i = AR5416_NUM_5G_CAL_PIERS - 1;
+ break;
+
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ for (; i >= 0; i--) {
+ if (cal_freq_pier[i] != 0xff)
+ break;
+ }
+ if (i < 0)
+ return -EINVAL;
+
+ idx = ar9170_find_freq_idx(i, cal_freq_pier, f);
+
+ ar9170_regwrite_begin(ar);
+
+ for (chain = 0; chain < AR5416_MAX_CHAINS; chain++) {
+ for (i = 0; i < AR5416_PD_GAIN_ICEPTS; i++) {
+ struct ar9170_calibration_data_per_freq *cal_pier_data;
+ int j;
+
+ switch (channel->band) {
+ case IEEE80211_BAND_2GHZ:
+ cal_pier_data = &ar->eeprom.
+ cal_pier_data_2G[chain][idx];
+ break;
+
+ case IEEE80211_BAND_5GHZ:
+ cal_pier_data = &ar->eeprom.
+ cal_pier_data_5G[chain][idx];
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ for (j = 0; j < 2; j++) {
+ vpds[j][i] = ar9170_interpolate_u8(f,
+ cal_freq_pier[idx],
+ cal_pier_data->vpd_pdg[j][i],
+ cal_freq_pier[idx + 1],
+ cal_pier_data[1].vpd_pdg[j][i]);
+
+ pwrs[j][i] = ar9170_interpolate_u8(f,
+ cal_freq_pier[idx],
+ cal_pier_data->pwr_pdg[j][i],
+ cal_freq_pier[idx + 1],
+ cal_pier_data[1].pwr_pdg[j][i]) / 2;
+ }
+ }
+
+ for (i = 0; i < 76; i++) {
+ u32 phy_data;
+ u8 tmp;
+
+ if (i < 25) {
+ tmp = ar9170_interpolate_val(i, &pwrs[0][0],
+ &vpds[0][0]);
+ } else {
+ tmp = ar9170_interpolate_val(i - 12,
+ &pwrs[1][0],
+ &vpds[1][0]);
+ }
+
+ phy_data |= tmp << ((i & 3) << 3);
+ if ((i & 3) == 3) {
+ ar9170_regwrite(0x1c6280 + chain * 0x1000 +
+ (i & ~3), phy_data);
+ phy_data = 0;
+ }
+ }
+
+ for (i = 19; i < 32; i++)
+ ar9170_regwrite(0x1c6280 + chain * 0x1000 + (i << 2),
+ 0x0);
+ }
+
+ ar9170_regwrite_finish();
+ return ar9170_regwrite_result();
+}
+
+static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
+ struct ar9170_calctl_edges edges[],
+ u32 freq)
+{
+/* TODO: move somewhere else */
+#define AR5416_MAX_RATE_POWER 63
+
+ int i;
+ u8 rc = AR5416_MAX_RATE_POWER;
+ u8 f;
+ if (freq < 3000)
+ f = freq - 2300;
+ else
+ f = (freq - 4800) / 5;
+
+ for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
+ if (edges[i].channel == 0xff)
+ break;
+ if (f == edges[i].channel) {
+ /* exact freq match */
+ rc = edges[i].power_flags & ~AR9170_CALCTL_EDGE_FLAGS;
+ break;
+ }
+ if (i > 0 && f < edges[i].channel) {
+ if (f > edges[i-1].channel &&
+ edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+ /* lower channel has the inband flag set */
+ rc = edges[i-1].power_flags &
+ ~AR9170_CALCTL_EDGE_FLAGS;
+ }
+ break;
+ }
+ }
+
+ if (i == AR5416_NUM_BAND_EDGES) {
+ if (f > edges[i-1].channel &&
+ edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+ /* lower channel has the inband flag set */
+ rc = edges[i-1].power_flags &
+ ~AR9170_CALCTL_EDGE_FLAGS;
+ }
+ }
+ return rc;
+}
+
+/* calculate the conformance test limits and apply them to ar->power*
+ * (derived from otus hal/hpmain.c, line 3706 ff.)
+ */
+static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
+{
+ u8 ctl_grp; /* CTL group */
+ u8 ctl_idx; /* CTL index */
+ int i, j;
+ struct ctl_modes {
+ u8 ctl_mode;
+ u8 max_power;
+ u8 *pwr_cal_data;
+ int pwr_cal_len;
+ } *modes;
+
+ /* order is relevant in the mode_list_*: we fall back to the
+ * lower indices if any mode is missed in the EEPROM.
+ */
+ struct ctl_modes mode_list_2ghz[] = {
+ { CTL_11B, 0, ar->power_2G_cck, 4 },
+ { CTL_11G, 0, ar->power_2G_ofdm, 4 },
+ { CTL_2GHT20, 0, ar->power_2G_ht20, 8 },
+ { CTL_2GHT40, 0, ar->power_2G_ht40, 8 },
+ };
+ struct ctl_modes mode_list_5ghz[] = {
+ { CTL_11A, 0, ar->power_5G_leg, 4 },
+ { CTL_5GHT20, 0, ar->power_5G_ht20, 8 },
+ { CTL_5GHT40, 0, ar->power_5G_ht40, 8 },
+ };
+ int nr_modes;
+
+#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
+
+ /* TODO: investigate the differences between OTUS'
+ * hpreg.c::zfHpGetRegulatoryDomain() and
+ * ath/regd.c::ath_regd_get_band_ctl() -
+ * e.g. for FCC3_WORLD the OTUS procedure
+ * always returns CTL_FCC, while the one in ath/ delivers
+ * CTL_ETSI for 2GHz and CTL_FCC for 5GHz.
+ */
+ ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory,
+ ar->hw->conf.channel->band);
+
+ /* ctl group not found - either invalid band (NO_CTL) or ww roaming */
+ if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL)
+ ctl_grp = CTL_FCC;
+
+ if (ctl_grp != CTL_FCC)
+ /* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */
+ return;
+
+ if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
+ modes = mode_list_2ghz;
+ nr_modes = ARRAY_SIZE(mode_list_2ghz);
+ } else {
+ modes = mode_list_5ghz;
+ nr_modes = ARRAY_SIZE(mode_list_5ghz);
+ }
+
+ for (i = 0; i < nr_modes; i++) {
+ u8 c = ctl_grp | modes[i].ctl_mode;
+ for (ctl_idx = 0; ctl_idx < AR5416_NUM_CTLS; ctl_idx++)
+ if (c == ar->eeprom.ctl_index[ctl_idx])
+ break;
+ if (ctl_idx < AR5416_NUM_CTLS) {
+ int f_off = 0;
+
+ /* adjust freq for 40MHz */
+ if (modes[i].ctl_mode == CTL_2GHT40 ||
+ modes[i].ctl_mode == CTL_5GHT40) {
+ if (bw == AR9170_BW_40_BELOW)
+ f_off = -10;
+ else
+ f_off = 10;
+ }
+
+ modes[i].max_power =
+ ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
+ freq+f_off);
+
+ /* TODO: check if the regulatory max. power is
+ * controlled by cfg80211 for DFS
+ * (hpmain applies it to max_power itself for DFS freq)
+ */
+
+ } else {
+ /* Workaround in otus driver, hpmain.c, line 3906:
+ * if no data for 5GHT20 are found, take the
+ * legacy 5G value.
+ * We extend this here to fallback from any other *HT or
+ * 11G, too.
+ */
+ int k = i;
+
+ modes[i].max_power = AR5416_MAX_RATE_POWER;
+ while (k-- > 0) {
+ if (modes[k].max_power !=
+ AR5416_MAX_RATE_POWER) {
+ modes[i].max_power = modes[k].max_power;
+ break;
+ }
+ }
+ }
+
+ /* apply max power to pwr_cal_data (ar->power_*) */
+ for (j = 0; j < modes[i].pwr_cal_len; j++) {
+ modes[i].pwr_cal_data[j] = min(modes[i].pwr_cal_data[j],
+ modes[i].max_power);
+ }
+ }
+#undef EDGES
+}
+
static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
{
struct ar9170_calibration_target_power_legacy *ctpl;
@@ -1089,6 +1497,12 @@
ctph[idx + 1].power[n]);
}
+
+ /* calc. conformance test limits and apply to ar->power*[] */
+ ar9170_calc_ctl(ar, freq, bw);
+
+ /* TODO: (heavy clip) regulatory domain power level fine-tuning. */
+
/* set ACK/CTS TX power */
ar9170_regwrite_begin(ar);
@@ -1207,6 +1621,10 @@
if (err)
return err;
+ err = ar9170_set_freq_cal_data(ar, channel);
+ if (err)
+ return err;
+
err = ar9170_set_power_cal(ar, channel->center_freq, bw);
if (err)
return err;
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 007eb85..e0138ac 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -783,7 +783,7 @@
aru->req_one_stage_fw = ar9170_requires_one_stage(id);
usb_set_intfdata(intf, aru);
- SET_IEEE80211_DEV(ar->hw, &udev->dev);
+ SET_IEEE80211_DEV(ar->hw, &intf->dev);
init_usb_anchor(&aru->rx_submitted);
init_usb_anchor(&aru->tx_pending);
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
new file mode 100644
index 0000000..a63e90c
--- /dev/null
+++ b/drivers/net/wireless/ath/ath.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_H
+#define ATH_H
+
+#include <linux/skbuff.h>
+
+struct reg_dmn_pair_mapping {
+ u16 regDmnEnum;
+ u16 reg_5ghz_ctl;
+ u16 reg_2ghz_ctl;
+};
+
+struct ath_regulatory {
+ char alpha2[2];
+ u16 country_code;
+ u16 max_power_level;
+ u32 tp_scale;
+ u16 current_rd;
+ u16 current_rd_ext;
+ int16_t power_limit;
+ struct reg_dmn_pair_mapping *regpair;
+};
+
+struct ath_common {
+ u16 cachelsz;
+ struct ath_regulatory regulatory;
+};
+
+struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
+ u32 len,
+ gfp_t gfp_mask);
+
+#endif /* ATH_H */
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index daf0c83..06d0066 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,7 +1,6 @@
config ATH5K
tristate "Atheros 5xxx wireless cards support"
- depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
- select ATH_COMMON
+ depends on PCI && MAC80211 && WLAN_80211
select MAC80211_LEDS
select LEDS_CLASS
select NEW_LEDS
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6358233..6cd5efc 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -27,8 +27,6 @@
#include <linux/types.h>
#include <net/mac80211.h>
-#include "../regd.h"
-
/* RX/TX descriptor hw structs
* TODO: Driver part should only see sw structs */
#include "desc.h"
@@ -308,6 +306,7 @@
#define AR5K_SREV_AR5311B 0x30 /* Spirit */
#define AR5K_SREV_AR5211 0x40 /* Oahu */
#define AR5K_SREV_AR5212 0x50 /* Venice */
+#define AR5K_SREV_AR5212_V4 0x54 /* ??? */
#define AR5K_SREV_AR5213 0x55 /* ??? */
#define AR5K_SREV_AR5213A 0x59 /* Hainan */
#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
@@ -713,8 +712,8 @@
* Used internaly for reset_tx_queue).
* Also see struct struct ieee80211_channel.
*/
-#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0)
-#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0)
+#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0)
+#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0)
/*
* The following structure is used to map 2GHz channels to
@@ -919,6 +918,12 @@
AR5K_INT_NOCARD = 0xffffffff
};
+/* Software interrupts used for calibration */
+enum ath5k_software_interrupt {
+ AR5K_SWI_FULL_CALIBRATION = 0x01,
+ AR5K_SWI_SHORT_CALIBRATION = 0x02,
+};
+
/*
* Power management
*/
@@ -1029,14 +1034,16 @@
enum ath5k_int ah_imr;
enum nl80211_iftype ah_op_mode;
- enum ath5k_power_mode ah_power_mode;
- struct ieee80211_channel ah_current_channel;
+ struct ieee80211_channel *ah_current_channel;
bool ah_turbo;
bool ah_calibration;
- bool ah_running;
bool ah_single_chip;
+ bool ah_aes_support;
bool ah_combined_mic;
+ enum ath5k_version ah_version;
+ enum ath5k_radio ah_radio;
+ u32 ah_phy;
u32 ah_mac_srev;
u16 ah_mac_version;
u16 ah_mac_revision;
@@ -1044,13 +1051,6 @@
u16 ah_radio_5ghz_revision;
u16 ah_radio_2ghz_revision;
- enum ath5k_version ah_version;
- enum ath5k_radio ah_radio;
- u32 ah_phy;
-
- bool ah_5ghz;
- bool ah_2ghz;
-
#define ah_modes ah_capabilities.cap_mode
#define ah_ee_version ah_capabilities.cap_eeprom.ee_version
@@ -1058,7 +1058,6 @@
u32 ah_aifs;
u32 ah_cw_min;
u32 ah_cw_max;
- bool ah_software_retry;
u32 ah_limit_tx_retries;
/* Antenna Control */
@@ -1066,6 +1065,7 @@
u8 ah_ant_mode;
u8 ah_tx_ant;
u8 ah_def_ant;
+ bool ah_software_retry;
u8 ah_sta_id[ETH_ALEN];
@@ -1075,10 +1075,8 @@
u8 ah_bssid[ETH_ALEN];
u8 ah_bssid_mask[ETH_ALEN];
- u32 ah_gpio[AR5K_MAX_GPIO];
int ah_gpio_npins;
- struct ath_regulatory ah_regulatory;
struct ath5k_capabilities ah_capabilities;
struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
@@ -1130,6 +1128,15 @@
/* noise floor from last periodic calibration */
s32 ah_noise_floor;
+ /* Calibration timestamp */
+ unsigned long ah_cal_tstamp;
+
+ /* Calibration interval (secs) */
+ u8 ah_cal_intval;
+
+ /* Software interrupt mask */
+ u8 ah_swi_mask;
+
/*
* Function pointers
*/
@@ -1153,7 +1160,7 @@
*/
/* Attach/Detach Functions */
-extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
+extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc);
extern void ath5k_hw_detach(struct ath5k_hw *ah);
/* LED functions */
@@ -1164,6 +1171,7 @@
/* Reset Functions */
extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_on_hold(struct ath5k_hw *ah);
extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
/* Power management functions */
extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
@@ -1282,6 +1290,7 @@
/* PHY calibration */
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
/* Spur mitigation */
bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index c41ef58..71a1bd25 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -95,17 +95,17 @@
* ath5k_hw_attach - Check if hw is supported and init the needed structs
*
* @sc: The &struct ath5k_softc we got from the driver's attach function
- * @mac_version: The mac version id (check out ath5k.h) based on pci id
*
* Check if the device is supported, perform a POST and initialize the needed
* structs. Returns -ENOMEM if we don't have memory for the needed structs,
* -ENODEV if the device is not supported or prints an error msg if something
* else went wrong.
*/
-struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
+struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc)
{
struct ath5k_hw *ah;
struct pci_dev *pdev = sc->pdev;
+ struct ath5k_eeprom_info *ee;
int ret;
u32 srev;
@@ -135,9 +135,15 @@
ah->ah_software_retry = false;
/*
- * Set the mac version based on the pci id
+ * Find the mac version
*/
- ah->ah_version = mac_version;
+ srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+ if (srev < AR5K_SREV_AR5311)
+ ah->ah_version = AR5K_AR5210;
+ else if (srev < AR5K_SREV_AR5212)
+ ah->ah_version = AR5K_AR5211;
+ else
+ ah->ah_version = AR5K_AR5212;
/*Fill the ath5k_hw struct with the needed functions*/
ret = ath5k_hw_init_desc_functions(ah);
@@ -145,12 +151,11 @@
goto err_free;
/* Bring device out of sleep and reset it's units */
- ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+ ret = ath5k_hw_nic_wakeup(ah, 0, true);
if (ret)
goto err_free;
/* Get MAC, PHY and RADIO revisions */
- srev = ath5k_hw_reg_read(ah, AR5K_SREV);
ah->ah_mac_srev = srev;
ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
@@ -253,28 +258,6 @@
}
/*
- * Write PCI-E power save settings
- */
- if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
- ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
- ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
- /* Shut off RX when elecidle is asserted */
- ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
- ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
- /* TODO: EEPROM work */
- ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
- /* Shut off PLL and CLKREQ active in L1 */
- ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
- /* Preserce other settings */
- ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
- ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
- ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
- /* Reset SERDES to load new settings */
- ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
- mdelay(1);
- }
-
- /*
* POST
*/
ret = ath5k_hw_post(ah);
@@ -283,7 +266,7 @@
/* Enable pci core retry fix on Hainan (5213A) and later chips */
if (srev >= AR5K_SREV_AR5213A)
- ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_RETRY_FIX);
/*
* Get card capabilities, calibration values etc
@@ -295,6 +278,40 @@
goto err_free;
}
+ /*
+ * Write PCI-E power save settings
+ */
+ if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+
+ ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+
+ /* Shut off RX when elecidle is asserted */
+ ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+
+ /* If serdes programing is enabled, increase PCI-E
+ * tx power for systems with long trace from host
+ * to minicard connector. */
+ if (ee->ee_serdes)
+ ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+ else
+ ath5k_hw_reg_write(ah, 0xf6800579, AR5K_PCIE_SERDES);
+
+ /* Shut off PLL and CLKREQ active in L1 */
+ ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+
+ /* Preserve other settings */
+ ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+
+ /* Reset SERDES to load new settings */
+ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+ mdelay(1);
+ }
+
/* Get misc capabilities */
ret = ath5k_hw_set_capabilities(ah);
if (ret) {
@@ -303,6 +320,12 @@
goto err_free;
}
+ /* Crypto settings */
+ ee = &ah->ah_capabilities.cap_eeprom;
+ ah->ah_aes_support = srev >= AR5K_SREV_AR5212_V4 &&
+ (ee->ee_version >= AR5K_EEPROM_VERSION_5_0 &&
+ !AR5K_EEPROM_AES_DIS(ee->ee_misc5));
+
if (srev >= AR5K_SREV_AR2414) {
ah->ah_combined_mic = true;
AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE,
@@ -319,6 +342,9 @@
ath5k_hw_rfgain_opt_init(ah);
+ /* turn on HW LEDs */
+ ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);
+
return ah;
err_free:
kfree(ah);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 029c1bc..9c6ab53 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -59,7 +59,7 @@
#include "reg.h"
#include "debug.h"
-static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
+static u8 ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
static int modparam_nohwcrypt;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
@@ -84,24 +84,24 @@
/* Known PCI ids */
static const struct pci_device_id ath5k_pci_id_table[] = {
- { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
- { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
- { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
- { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
- { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
- { PCI_VDEVICE(3COM_2, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
- { PCI_VDEVICE(3COM, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
- { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
- { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
- { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
- { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
- { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
+ { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
+ { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
+ { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
+ { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
+ { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
+ { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
+ { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
+ { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
+ { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
+ { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
+ { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
+ { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
+ { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
{ 0 }
};
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
@@ -218,6 +218,8 @@
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
+static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq);
static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
@@ -227,10 +229,12 @@
static void ath5k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
+static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mc_list);
static void ath5k_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags,
- int mc_count, struct dev_mc_list *mclist);
+ u64 multicast);
static int ath5k_set_key(struct ieee80211_hw *hw,
enum set_key_cmd cmd,
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
@@ -248,6 +252,8 @@
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changes);
+static void ath5k_sw_scan_start(struct ieee80211_hw *hw);
+static void ath5k_sw_scan_complete(struct ieee80211_hw *hw);
static const struct ieee80211_ops ath5k_hw_ops = {
.tx = ath5k_tx,
@@ -256,6 +262,7 @@
.add_interface = ath5k_add_interface,
.remove_interface = ath5k_remove_interface,
.config = ath5k_config,
+ .prepare_multicast = ath5k_prepare_multicast,
.configure_filter = ath5k_configure_filter,
.set_key = ath5k_set_key,
.get_stats = ath5k_get_stats,
@@ -265,6 +272,8 @@
.set_tsf = ath5k_set_tsf,
.reset_tsf = ath5k_reset_tsf,
.bss_info_changed = ath5k_bss_info_changed,
+ .sw_scan_start = ath5k_sw_scan_start,
+ .sw_scan_complete = ath5k_sw_scan_complete,
};
/*
@@ -297,7 +306,8 @@
static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
struct ath5k_buf *bf);
static int ath5k_txbuf_setup(struct ath5k_softc *sc,
- struct ath5k_buf *bf);
+ struct ath5k_buf *bf,
+ struct ath5k_txq *txq);
static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
struct ath5k_buf *bf)
{
@@ -369,7 +379,7 @@
static irqreturn_t ath5k_intr(int irq, void *dev_id);
static void ath5k_tasklet_reset(unsigned long data);
-static void ath5k_calibrate(unsigned long data);
+static void ath5k_tasklet_calibrate(unsigned long data);
/*
* Module init/exit functions
@@ -464,7 +474,7 @@
* DMA to work so force a reasonable value here if it
* comes up zero.
*/
- csz = L1_CACHE_BYTES / sizeof(u32);
+ csz = L1_CACHE_BYTES >> 2;
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
}
/*
@@ -512,6 +522,7 @@
/* Initialize driver private data */
SET_IEEE80211_DEV(hw, &pdev->dev);
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
@@ -536,7 +547,7 @@
__set_bit(ATH_STAT_INVALID, sc->status);
sc->iobase = mem; /* So we can unmap it on detach */
- sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
+ sc->common.cachelsz = csz << 2; /* convert to bytes */
sc->opmode = NL80211_IFTYPE_STATION;
sc->bintval = 1000;
mutex_init(&sc->lock);
@@ -555,7 +566,7 @@
}
/* Initialize device */
- sc->ah = ath5k_hw_attach(sc, id->driver_data);
+ sc->ah = ath5k_hw_attach(sc);
if (IS_ERR(sc->ah)) {
ret = PTR_ERR(sc->ah);
goto err_irq;
@@ -666,7 +677,6 @@
ath5k_led_off(sc);
- free_irq(pdev->irq, sc);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
@@ -694,18 +704,8 @@
*/
pci_write_config_byte(pdev, 0x41, 0);
- err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
- if (err) {
- ATH5K_ERR(sc, "request_irq failed\n");
- goto err_no_irq;
- }
-
ath5k_led_enable(sc);
return 0;
-
-err_no_irq:
- pci_disable_device(pdev);
- return err;
}
#endif /* CONFIG_PM */
@@ -718,9 +718,9 @@
{
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct ath5k_softc *sc = hw->priv;
- struct ath_regulatory *reg = &sc->ah->ah_regulatory;
+ struct ath_regulatory *regulatory = &sc->common.regulatory;
- return ath_reg_notifier_apply(wiphy, request, reg);
+ return ath_reg_notifier_apply(wiphy, request, regulatory);
}
static int
@@ -728,6 +728,7 @@
{
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
+ struct ath_regulatory *regulatory = &sc->common.regulatory;
u8 mac[ETH_ALEN] = {};
int ret;
@@ -785,19 +786,25 @@
goto err_desc;
}
sc->bhalq = ret;
+ sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
+ if (IS_ERR(sc->cabq)) {
+ ATH5K_ERR(sc, "can't setup cab queue\n");
+ ret = PTR_ERR(sc->cabq);
+ goto err_bhal;
+ }
sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
if (IS_ERR(sc->txq)) {
ATH5K_ERR(sc, "can't setup xmit queue\n");
ret = PTR_ERR(sc->txq);
- goto err_bhal;
+ goto err_queues;
}
tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
+ tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
- setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
ret = ath5k_eeprom_read_mac(ah, mac);
if (ret) {
@@ -811,9 +818,8 @@
memset(sc->bssidmask, 0xff, ETH_ALEN);
ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
- ah->ah_regulatory.current_rd =
- ah->ah_capabilities.cap_eeprom.ee_regdomain;
- ret = ath_regd_init(&ah->ah_regulatory, hw->wiphy, ath5k_reg_notifier);
+ regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
+ ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
if (ret) {
ATH5K_ERR(sc, "can't initialize regulatory system\n");
goto err_queues;
@@ -825,8 +831,8 @@
goto err_queues;
}
- if (!ath_is_world_regd(&sc->ah->ah_regulatory))
- regulatory_hint(hw->wiphy, sc->ah->ah_regulatory.alpha2);
+ if (!ath_is_world_regd(regulatory))
+ regulatory_hint(hw->wiphy, regulatory->alpha2);
ath5k_init_leds(sc);
@@ -1068,10 +1074,9 @@
}
/*
- * Set/change channels. If the channel is really being changed,
- * it's done by reseting the chip. To accomplish this we must
- * first cleanup any pending DMA, then restart stuff after a la
- * ath5k_init.
+ * Set/change channels. We always reset the chip.
+ * To accomplish this we must first cleanup any pending DMA,
+ * then restart stuff after a la ath5k_init.
*
* Called with sc->lock.
*/
@@ -1081,19 +1086,13 @@
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n",
sc->curchan->center_freq, chan->center_freq);
- if (chan->center_freq != sc->curchan->center_freq ||
- chan->hw_value != sc->curchan->hw_value) {
-
- /*
- * To switch channels clear any pending DMA operations;
- * wait long enough for the RX fifo to drain, reset the
- * hardware at the new frequency, and then re-enable
- * the relevant bits of the h/w.
- */
- return ath5k_reset(sc, chan);
- }
-
- return 0;
+ /*
+ * To switch channels clear any pending DMA operations;
+ * wait long enough for the RX fifo to drain, reset the
+ * hardware at the new frequency, and then re-enable
+ * the relevant bits of the h/w.
+ */
+ return ath5k_reset(sc, chan);
}
static void
@@ -1114,6 +1113,8 @@
struct ath5k_hw *ah = sc->ah;
u32 rfilt;
+ ah->ah_op_mode = sc->opmode;
+
/* configure rx filter */
rfilt = sc->filter_flags;
ath5k_hw_set_rx_filter(ah, rfilt);
@@ -1153,27 +1154,20 @@
struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
{
struct sk_buff *skb;
- unsigned int off;
/*
* Allocate buffer with headroom_needed space for the
* fake physical layer header at the start.
*/
- skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
+ skb = ath_rxbuf_alloc(&sc->common,
+ sc->rxbufsize + sc->common.cachelsz - 1,
+ GFP_ATOMIC);
if (!skb) {
ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
- sc->rxbufsize + sc->cachelsz - 1);
+ sc->rxbufsize + sc->common.cachelsz - 1);
return NULL;
}
- /*
- * Cache-line-align. This is important (for the
- * 5210 at least) as not doing so causes bogus data
- * in rx'd frames.
- */
- off = ((unsigned long)skb->data) % sc->cachelsz;
- if (off != 0)
- skb_reserve(skb, sc->cachelsz - off);
*skb_addr = pci_map_single(sc->pdev,
skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
@@ -1228,10 +1222,10 @@
}
static int
-ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
+ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
+ struct ath5k_txq *txq)
{
struct ath5k_hw *ah = sc->ah;
- struct ath5k_txq *txq = sc->txq;
struct ath5k_desc *ds = bf->desc;
struct sk_buff *skb = bf->skb;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -1615,10 +1609,10 @@
struct ath5k_buf *bf;
int ret;
- sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
+ sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->common.cachelsz);
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
- sc->cachelsz, sc->rxbufsize);
+ sc->common.cachelsz, sc->rxbufsize);
spin_lock_bh(&sc->rxbuflock);
sc->rxlink = NULL;
@@ -1747,7 +1741,7 @@
static void
ath5k_tasklet_rx(unsigned long data)
{
- struct ieee80211_rx_status rxs = {};
+ struct ieee80211_rx_status *rxs;
struct ath5k_rx_status rs = {};
struct sk_buff *skb, *next_skb;
dma_addr_t next_skb_addr;
@@ -1757,6 +1751,7 @@
int ret;
int hdrlen;
int padsize;
+ int rx_flag;
spin_lock(&sc->rxbuflock);
if (list_empty(&sc->rxbuf)) {
@@ -1764,7 +1759,7 @@
goto unlock;
}
do {
- rxs.flag = 0;
+ rx_flag = 0;
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
BUG_ON(bf->skb == NULL);
@@ -1808,7 +1803,7 @@
goto accept;
}
if (rs.rs_status & AR5K_RXERR_MIC) {
- rxs.flag |= RX_FLAG_MMIC_ERROR;
+ rx_flag |= RX_FLAG_MMIC_ERROR;
goto accept;
}
@@ -1846,6 +1841,7 @@
memmove(skb->data + padsize, skb->data, hdrlen);
skb_pull(skb, padsize);
}
+ rxs = IEEE80211_SKB_RXCB(skb);
/*
* always extend the mac timestamp, since this information is
@@ -1867,41 +1863,41 @@
* impossible to comply to that. This affects IBSS merge only
* right now, so it's not too bad...
*/
- rxs.mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp);
- rxs.flag |= RX_FLAG_TSFT;
+ rxs->mactime = ath5k_extend_tsf(sc->ah, rs.rs_tstamp);
+ rxs->flag = rx_flag | RX_FLAG_TSFT;
- rxs.freq = sc->curchan->center_freq;
- rxs.band = sc->curband->band;
+ rxs->freq = sc->curchan->center_freq;
+ rxs->band = sc->curband->band;
- rxs.noise = sc->ah->ah_noise_floor;
- rxs.signal = rxs.noise + rs.rs_rssi;
+ rxs->noise = sc->ah->ah_noise_floor;
+ rxs->signal = rxs->noise + rs.rs_rssi;
/* An rssi of 35 indicates you should be able use
* 54 Mbps reliably. A more elaborate scheme can be used
* here but it requires a map of SNR/throughput for each
* possible mode used */
- rxs.qual = rs.rs_rssi * 100 / 35;
+ rxs->qual = rs.rs_rssi * 100 / 35;
/* rssi can be more than 35 though, anything above that
* should be considered at 100% */
- if (rxs.qual > 100)
- rxs.qual = 100;
+ if (rxs->qual > 100)
+ rxs->qual = 100;
- rxs.antenna = rs.rs_antenna;
- rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
- rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
+ rxs->antenna = rs.rs_antenna;
+ rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
+ rxs->flag |= ath5k_rx_decrypted(sc, ds, skb, &rs);
- if (rxs.rate_idx >= 0 && rs.rs_rate ==
- sc->curband->bitrates[rxs.rate_idx].hw_value_short)
- rxs.flag |= RX_FLAG_SHORTPRE;
+ if (rxs->rate_idx >= 0 && rs.rs_rate ==
+ sc->curband->bitrates[rxs->rate_idx].hw_value_short)
+ rxs->flag |= RX_FLAG_SHORTPRE;
ath5k_debug_dump_skb(sc, skb, "RX ", 0);
/* check beacons in IBSS mode */
if (sc->opmode == NL80211_IFTYPE_ADHOC)
- ath5k_check_ibss_tsf(sc, skb, &rxs);
+ ath5k_check_ibss_tsf(sc, skb, rxs);
- __ieee80211_rx(sc->hw, skb, &rxs);
+ ieee80211_rx(sc->hw, skb);
bf->skb = next_skb;
bf->skbaddr = next_skb_addr;
@@ -1994,9 +1990,12 @@
static void
ath5k_tasklet_tx(unsigned long data)
{
+ int i;
struct ath5k_softc *sc = (void *)data;
- ath5k_tx_processq(sc, sc->txq);
+ for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
+ if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
+ ath5k_tx_processq(sc, &sc->txqs[i]);
}
@@ -2078,13 +2077,6 @@
return ret;
}
-static void ath5k_beacon_disable(struct ath5k_softc *sc)
-{
- sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
- ath5k_hw_set_imr(sc->ah, sc->imask);
- ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
-}
-
/*
* Transmit a beacon frame at SWBA. Dynamic updates to the
* frame contents are done as needed and the slot time is
@@ -2098,6 +2090,7 @@
{
struct ath5k_buf *bf = sc->bbuf;
struct ath5k_hw *ah = sc->ah;
+ struct sk_buff *skb;
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
@@ -2151,6 +2144,12 @@
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
+ skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
+ while (skb) {
+ ath5k_tx_queue(sc->hw, skb, sc->cabq);
+ skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
+ }
+
sc->bsent++;
}
@@ -2271,13 +2270,11 @@
struct ath5k_hw *ah = sc->ah;
unsigned long flags;
- ath5k_hw_set_imr(ah, 0);
+ spin_lock_irqsave(&sc->block, flags);
sc->bmisscount = 0;
sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
- if (sc->opmode == NL80211_IFTYPE_ADHOC ||
- sc->opmode == NL80211_IFTYPE_MESH_POINT ||
- sc->opmode == NL80211_IFTYPE_AP) {
+ if (sc->enable_beacon) {
/*
* In IBSS mode we use a self-linked tx descriptor and let the
* hardware send the beacons automatically. We have to load it
@@ -2290,16 +2287,17 @@
sc->imask |= AR5K_INT_SWBA;
if (sc->opmode == NL80211_IFTYPE_ADHOC) {
- if (ath5k_hw_hasveol(ah)) {
- spin_lock_irqsave(&sc->block, flags);
+ if (ath5k_hw_hasveol(ah))
ath5k_beacon_send(sc);
- spin_unlock_irqrestore(&sc->block, flags);
- }
} else
ath5k_beacon_update_timers(sc, -1);
+ } else {
+ ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
}
ath5k_hw_set_imr(ah, sc->imask);
+ mmiowb();
+ spin_unlock_irqrestore(&sc->block, flags);
}
static void ath5k_tasklet_beacon(unsigned long data)
@@ -2363,7 +2361,7 @@
sc->curband = &sc->sbands[sc->curchan->band];
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
- AR5K_INT_FATAL | AR5K_INT_GLOBAL;
+ AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_SWI;
ret = ath5k_reset(sc, NULL);
if (ret)
goto done;
@@ -2380,8 +2378,8 @@
/* Set ack to be sent at low bit-rates */
ath5k_hw_set_ack_bitrate_high(ah, false);
- mod_timer(&sc->calib_tim, round_jiffies(jiffies +
- msecs_to_jiffies(ath5k_calinterval * 1000)));
+ /* Set PHY calibration inteval */
+ ah->ah_cal_intval = ath5k_calinterval;
ret = 0;
done:
@@ -2445,37 +2443,39 @@
ret = ath5k_stop_locked(sc);
if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
/*
- * Set the chip in full sleep mode. Note that we are
- * careful to do this only when bringing the interface
- * completely to a stop. When the chip is in this state
- * it must be carefully woken up or references to
- * registers in the PCI clock domain may freeze the bus
- * (and system). This varies by chip and is mostly an
- * issue with newer parts that go to sleep more quickly.
- */
- if (sc->ah->ah_mac_srev >= 0x78) {
- /*
- * XXX
- * don't put newer MAC revisions > 7.8 to sleep because
- * of the above mentioned problems
- */
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
- "not putting device to sleep\n");
- } else {
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
- "putting device to full sleep\n");
- ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
- }
+ * Don't set the card in full sleep mode!
+ *
+ * a) When the device is in this state it must be carefully
+ * woken up or references to registers in the PCI clock
+ * domain may freeze the bus (and system). This varies
+ * by chip and is mostly an issue with newer parts
+ * (madwifi sources mentioned srev >= 0x78) that go to
+ * sleep more quickly.
+ *
+ * b) On older chips full sleep results a weird behaviour
+ * during wakeup. I tested various cards with srev < 0x78
+ * and they don't wake up after module reload, a second
+ * module reload is needed to bring the card up again.
+ *
+ * Until we figure out what's going on don't enable
+ * full chip reset on any chip (this is what Legacy HAL
+ * and Sam's HAL do anyway). Instead Perform a full reset
+ * on the device (same as initial state after attach) and
+ * leave it idle (keep MAC/BB on warm reset) */
+ ret = ath5k_hw_on_hold(sc->ah);
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+ "putting device to sleep\n");
}
ath5k_txbuf_free(sc, sc->bbuf);
mmiowb();
mutex_unlock(&sc->lock);
- del_timer_sync(&sc->calib_tim);
tasklet_kill(&sc->rxtq);
tasklet_kill(&sc->txtq);
tasklet_kill(&sc->restq);
+ tasklet_kill(&sc->calib);
tasklet_kill(&sc->beacontq);
ath5k_rfkill_hw_stop(sc->ah);
@@ -2531,6 +2531,9 @@
if (status & AR5K_INT_BMISS) {
/* TODO */
}
+ if (status & AR5K_INT_SWI) {
+ tasklet_schedule(&sc->calib);
+ }
if (status & AR5K_INT_MIB) {
/*
* These stats are also used for ANI i think
@@ -2547,6 +2550,8 @@
if (unlikely(!counter))
ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
+ ath5k_hw_calibration_poll(ah);
+
return IRQ_HANDLED;
}
@@ -2563,11 +2568,19 @@
* for temperature/environment changes.
*/
static void
-ath5k_calibrate(unsigned long data)
+ath5k_tasklet_calibrate(unsigned long data)
{
struct ath5k_softc *sc = (void *)data;
struct ath5k_hw *ah = sc->ah;
+ /* Only full calibration for now */
+ if (ah->ah_swi_mask != AR5K_SWI_FULL_CALIBRATION)
+ return;
+
+ /* Stop queues so that calibration
+ * doesn't interfere with tx */
+ ieee80211_stop_queues(sc->hw);
+
ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
ieee80211_frequency_to_channel(sc->curchan->center_freq),
sc->curchan->hw_value);
@@ -2585,8 +2598,11 @@
ieee80211_frequency_to_channel(
sc->curchan->center_freq));
- mod_timer(&sc->calib_tim, round_jiffies(jiffies +
- msecs_to_jiffies(ath5k_calinterval * 1000)));
+ ah->ah_swi_mask = 0;
+
+ /* Wake queues */
+ ieee80211_wake_queues(sc->hw);
+
}
@@ -2598,6 +2614,14 @@
ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ath5k_softc *sc = hw->priv;
+
+ return ath5k_tx_queue(hw, skb, sc->txq);
+}
+
+static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq)
+{
+ struct ath5k_softc *sc = hw->priv;
struct ath5k_buf *bf;
unsigned long flags;
int hdrlen;
@@ -2641,7 +2665,7 @@
bf->skb = skb;
- if (ath5k_txbuf_setup(sc, bf)) {
+ if (ath5k_txbuf_setup(sc, bf, txq)) {
bf->skb = NULL;
spin_lock_irqsave(&sc->txbuflock, flags);
list_add_tail(&bf->list, &sc->txbuf);
@@ -2676,7 +2700,7 @@
sc->curchan = chan;
sc->curband = &sc->sbands[chan->band];
}
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
@@ -2757,6 +2781,7 @@
}
ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
+ ath5k_mode_setup(sc);
ret = 0;
end:
@@ -2776,7 +2801,6 @@
goto end;
ath5k_hw_set_lladdr(sc->ah, mac);
- ath5k_beacon_disable(sc);
sc->vif = NULL;
end:
mutex_unlock(&sc->lock);
@@ -2795,9 +2819,11 @@
mutex_lock(&sc->lock);
- ret = ath5k_chan_set(sc, conf->channel);
- if (ret < 0)
- goto unlock;
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ ret = ath5k_chan_set(sc, conf->channel);
+ if (ret < 0)
+ goto unlock;
+ }
if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
(sc->power_level != conf->power_level)) {
@@ -2831,6 +2857,37 @@
return ret;
}
+static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mclist)
+{
+ u32 mfilt[2], val;
+ int i;
+ u8 pos;
+
+ mfilt[0] = 0;
+ mfilt[1] = 1;
+
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ /* calculate XOR of eight 6-bit values */
+ val = get_unaligned_le32(mclist->dmi_addr + 0);
+ pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+ val = get_unaligned_le32(mclist->dmi_addr + 3);
+ pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+ pos &= 0x3f;
+ mfilt[pos / 32] |= (1 << (pos % 32));
+ /* XXX: we might be able to just do this instead,
+ * but not sure, needs testing, if we do use this we'd
+ * neet to inform below to not reset the mcast */
+ /* ath5k_hw_set_mcast_filterindex(ah,
+ * mclist->dmi_addr[5]); */
+ mclist = mclist->next;
+ }
+
+ return ((u64)(mfilt[1]) << 32) | mfilt[0];
+}
+
#define SUPPORTED_FIF_FLAGS \
FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
@@ -2856,16 +2913,16 @@
static void ath5k_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags,
- int mc_count, struct dev_mc_list *mclist)
+ u64 multicast)
{
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
- u32 mfilt[2], val, rfilt;
- u8 pos;
- int i;
+ u32 mfilt[2], rfilt;
- mfilt[0] = 0;
- mfilt[1] = 0;
+ mutex_lock(&sc->lock);
+
+ mfilt[0] = multicast;
+ mfilt[1] = multicast >> 32;
/* Only deal with supported flags */
changed_flags &= SUPPORTED_FIF_FLAGS;
@@ -2891,24 +2948,6 @@
if (*new_flags & FIF_ALLMULTI) {
mfilt[0] = ~0;
mfilt[1] = ~0;
- } else {
- for (i = 0; i < mc_count; i++) {
- if (!mclist)
- break;
- /* calculate XOR of eight 6-bit values */
- val = get_unaligned_le32(mclist->dmi_addr + 0);
- pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
- val = get_unaligned_le32(mclist->dmi_addr + 3);
- pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
- pos &= 0x3f;
- mfilt[pos / 32] |= (1 << (pos % 32));
- /* XXX: we might be able to just do this instead,
- * but not sure, needs testing, if we do use this we'd
- * neet to inform below to not reset the mcast */
- /* ath5k_hw_set_mcast_filterindex(ah,
- * mclist->dmi_addr[5]); */
- mclist = mclist->next;
- }
}
/* This is the best we can do */
@@ -2932,22 +2971,25 @@
/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
- if (sc->opmode == NL80211_IFTYPE_MONITOR)
- rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
- AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
- if (sc->opmode != NL80211_IFTYPE_STATION)
- rfilt |= AR5K_RX_FILTER_PROBEREQ;
- if (sc->opmode != NL80211_IFTYPE_AP &&
- sc->opmode != NL80211_IFTYPE_MESH_POINT &&
- test_bit(ATH_STAT_PROMISC, sc->status))
- rfilt |= AR5K_RX_FILTER_PROM;
- if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) ||
- sc->opmode == NL80211_IFTYPE_ADHOC ||
- sc->opmode == NL80211_IFTYPE_AP)
- rfilt |= AR5K_RX_FILTER_BEACON;
- if (sc->opmode == NL80211_IFTYPE_MESH_POINT)
- rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
- AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
+ switch (sc->opmode) {
+ case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_MONITOR:
+ rfilt |= AR5K_RX_FILTER_CONTROL |
+ AR5K_RX_FILTER_BEACON |
+ AR5K_RX_FILTER_PROBEREQ |
+ AR5K_RX_FILTER_PROM;
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ rfilt |= AR5K_RX_FILTER_PROBEREQ |
+ AR5K_RX_FILTER_BEACON;
+ break;
+ case NL80211_IFTYPE_STATION:
+ if (sc->assoc)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ default:
+ break;
+ }
/* Set filters */
ath5k_hw_set_rx_filter(ah, rfilt);
@@ -2957,6 +2999,8 @@
/* Set the cached hw filter flags, this will alter actually
* be set in HW */
sc->filter_flags = rfilt;
+
+ mutex_unlock(&sc->lock);
}
static int
@@ -2978,6 +3022,9 @@
case ALG_TKIP:
break;
case ALG_CCMP:
+ if (sc->ah->ah_aes_support)
+ break;
+
return -EOPNOTSUPP;
default:
WARN_ON(1);
@@ -3108,25 +3155,6 @@
return ret;
}
-/*
- * Update the beacon and reconfigure the beacon queues.
- */
-static void
-ath5k_beacon_reconfig(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
- int ret;
- unsigned long flags;
- struct ath5k_softc *sc = hw->priv;
-
- spin_lock_irqsave(&sc->block, flags);
- ret = ath5k_beacon_update(hw, vif);
- spin_unlock_irqrestore(&sc->block, flags);
- if (ret == 0) {
- ath5k_beacon_config(sc);
- mmiowb();
- }
-}
-
static void
set_beacon_filter(struct ieee80211_hw *hw, bool enable)
{
@@ -3149,6 +3177,7 @@
{
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
+ unsigned long flags;
mutex_lock(&sc->lock);
if (WARN_ON(sc->vif != vif))
@@ -3170,15 +3199,37 @@
sc->assoc = bss_conf->assoc;
if (sc->opmode == NL80211_IFTYPE_STATION)
set_beacon_filter(hw, sc->assoc);
+ ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
+ AR5K_LED_ASSOC : AR5K_LED_INIT);
}
- if (changes & BSS_CHANGED_BEACON &&
- (vif->type == NL80211_IFTYPE_ADHOC ||
- vif->type == NL80211_IFTYPE_MESH_POINT ||
- vif->type == NL80211_IFTYPE_AP)) {
- ath5k_beacon_reconfig(hw, vif);
+ if (changes & BSS_CHANGED_BEACON) {
+ spin_lock_irqsave(&sc->block, flags);
+ ath5k_beacon_update(hw, vif);
+ spin_unlock_irqrestore(&sc->block, flags);
}
+ if (changes & BSS_CHANGED_BEACON_ENABLED)
+ sc->enable_beacon = bss_conf->enable_beacon;
+
+ if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON_INT))
+ ath5k_beacon_config(sc);
+
unlock:
mutex_unlock(&sc->lock);
}
+
+static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+ if (!sc->assoc)
+ ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
+}
+
+static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
+{
+ struct ath5k_softc *sc = hw->priv;
+ ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
+ AR5K_LED_ASSOC : AR5K_LED_INIT);
+}
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index f9b7f2f..a28c42f 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -51,6 +51,9 @@
#include "ath5k.h"
#include "debug.h"
+#include "../regd.h"
+#include "../ath.h"
+
#define ATH_RXBUF 40 /* number of RX buffers */
#define ATH_TXBUF 200 /* number of TX buffers */
#define ATH_BCBUF 1 /* number of beacon buffers */
@@ -112,10 +115,10 @@
* associated with an instance of a device */
struct ath5k_softc {
struct pci_dev *pdev; /* for dma mapping */
+ struct ath_common common;
void __iomem *iobase; /* address of the device */
struct mutex lock; /* dev-level lock */
- /* FIXME: how many does it really need? */
- struct ieee80211_tx_queue_stats tx_stats[16];
+ struct ieee80211_tx_queue_stats tx_stats[AR5K_NUM_TX_QUEUES];
struct ieee80211_low_level_stats ll_stats;
struct ieee80211_hw *hw; /* IEEE 802.11 common */
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
@@ -135,7 +138,6 @@
struct ath5k_desc *desc; /* TX/RX descriptors */
dma_addr_t desc_daddr; /* DMA (physical) address */
size_t desc_len; /* size of TX/RX descriptors */
- u16 cachelsz; /* cache line size */
DECLARE_BITMAP(status, 5);
#define ATH_STAT_INVALID 0 /* disable hardware accesses */
@@ -171,14 +173,15 @@
struct list_head txbuf; /* transmit buffer */
spinlock_t txbuflock;
unsigned int txbuf_len; /* buf count in txbuf list */
- struct ath5k_txq txqs[2]; /* beacon and tx */
-
- struct ath5k_txq *txq; /* beacon and tx*/
+ struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */
+ struct ath5k_txq *txq; /* main tx queue */
struct tasklet_struct txtq; /* tx intr tasklet */
struct ath5k_led tx_led; /* tx led */
struct ath5k_rfkill rf_kill;
+ struct tasklet_struct calib; /* calibration tasklet */
+
spinlock_t block; /* protects beacon */
struct tasklet_struct beacontq; /* beacon intr tasklet */
struct ath5k_buf *bbuf; /* beacon buffer */
@@ -187,10 +190,11 @@
bintval, /* beacon interval in TU */
bsent;
unsigned int nexttbtt; /* next beacon time in TU */
+ struct ath5k_txq *cabq; /* content after beacon */
- struct timer_list calib_tim; /* calibration timer */
int power_level; /* Requested tx power in dbm */
bool assoc; /* assocate state */
+ bool enable_beacon; /* true if beacons are on */
};
#define ath5k_hw_hasbssidmask(_ah) \
@@ -198,4 +202,15 @@
#define ath5k_hw_hasveol(_ah) \
(ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0)
+static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
+{
+ return &ah->ah_sc->common;
+}
+
+static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
+{
+ return &(ath5k_hw_common(ah)->regulatory);
+
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index 4904a07..747508c 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -380,13 +380,15 @@
sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
ath5k_global_debugfs);
- sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO,
+ sc->debug.debugfs_debug = debugfs_create_file("debug",
+ S_IWUSR | S_IRUSR,
sc->debug.debugfs_phydir, sc, &fops_debug);
- sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO,
+ sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUSR,
sc->debug.debugfs_phydir, sc, &fops_registers);
- sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO,
+ sc->debug.debugfs_beacon = debugfs_create_file("beacon",
+ S_IWUSR | S_IRUSR,
sc->debug.debugfs_phydir, sc, &fops_beacon);
sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR,
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index c56b494d..644962a 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -167,6 +167,16 @@
ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL);
ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false;
+ /* Check if PCIE_OFFSET points to PCIE_SERDES_SECTION
+ * and enable serdes programming if needed.
+ *
+ * XXX: Serdes values seem to be fixed so
+ * no need to read them here, we write them
+ * during ath5k_hw_attach */
+ AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val);
+ ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ?
+ true : false;
+
return 0;
}
@@ -404,27 +414,11 @@
break;
}
-done:
- /* return new offset */
- *offset = o;
-
- return 0;
-}
-
-/*
- * Read turbo mode information on newer EEPROM versions
- */
-static int
-ath5k_eeprom_read_turbo_modes(struct ath5k_hw *ah,
- u32 *offset, unsigned int mode)
-{
- struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
- u32 o = *offset;
- u16 val;
- int ret;
-
+ /*
+ * Read turbo mode information on newer EEPROM versions
+ */
if (ee->ee_version < AR5K_EEPROM_VERSION_5_0)
- return 0;
+ goto done;
switch (mode){
case AR5K_EEPROM_MODE_11A:
@@ -458,6 +452,7 @@
break;
}
+done:
/* return new offset */
*offset = o;
@@ -494,10 +489,6 @@
ret = ath5k_eeprom_read_modes(ah, &offset, mode);
if (ret)
return ret;
-
- ret = ath5k_eeprom_read_turbo_modes(ah, &offset, mode);
- if (ret)
- return ret;
}
/* override for older eeprom versions for better performance */
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 64be73a..0123f35 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -19,6 +19,9 @@
/*
* Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
*/
+#define AR5K_EEPROM_PCIE_OFFSET 0x02 /* Contains offset to PCI-E infos */
+#define AR5K_EEPROM_PCIE_SERDES_SECTION 0x40 /* PCIE_OFFSET points here when
+ * SERDES infos are present */
#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */
@@ -391,6 +394,7 @@
u8 ee_rfkill_pin;
bool ee_rfkill_pol;
bool ee_is_hb63;
+ bool ee_serdes;
u16 ee_misc0;
u16 ee_misc1;
u16 ee_misc2;
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 876725f..b767c3b 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -69,6 +69,8 @@
{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
/* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
{ ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+ /* HP Compaq C700 (nitrousnrg@gmail.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
/* IBM-specific AR5212 (all others) */
{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
{ }
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index a876ca8..1a039f2 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -740,13 +740,22 @@
AR5K_RF_XPD_GAIN, true);
} else {
- /* TODO: Set high and low gain bits */
- ath5k_hw_rfb_op(ah, rf_regs,
- ee->ee_x_gain[ee_mode],
+ u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode];
+ if (ee->ee_pd_gains[ee_mode] > 1) {
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[0],
AR5K_RF_PD_GAIN_LO, true);
- ath5k_hw_rfb_op(ah, rf_regs,
- ee->ee_x_gain[ee_mode],
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[1],
AR5K_RF_PD_GAIN_HI, true);
+ } else {
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[0],
+ AR5K_RF_PD_GAIN_LO, true);
+ ath5k_hw_rfb_op(ah, rf_regs,
+ pdg_curve_to_idx[0],
+ AR5K_RF_PD_GAIN_HI, true);
+ }
/* Lower synth voltage on Rev 2 */
ath5k_hw_rfb_op(ah, rf_regs, 2,
@@ -1085,8 +1094,7 @@
AR5K_PHY_CCKTXCTL_WORLD);
}
- ah->ah_current_channel.center_freq = channel->center_freq;
- ah->ah_current_channel.hw_value = channel->hw_value;
+ ah->ah_current_channel = channel;
ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false;
return 0;
@@ -1096,6 +1104,29 @@
PHY calibration
\*****************/
+void
+ath5k_hw_calibration_poll(struct ath5k_hw *ah)
+{
+ /* Calibration interval in jiffies */
+ unsigned long cal_intval;
+
+ cal_intval = msecs_to_jiffies(ah->ah_cal_intval * 1000);
+
+ /* Initialize timestamp if needed */
+ if (!ah->ah_cal_tstamp)
+ ah->ah_cal_tstamp = jiffies;
+
+ /* For now we always do full calibration
+ * Mark software interrupt mask and fire software
+ * interrupt (bit gets auto-cleared) */
+ if (time_is_before_eq_jiffies(ah->ah_cal_tstamp + cal_intval)) {
+ ah->ah_cal_tstamp = jiffies;
+ ah->ah_swi_mask = AR5K_SWI_FULL_CALIBRATION;
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI);
+ }
+
+}
+
/**
* ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
*
@@ -1731,7 +1762,7 @@
void
ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
{
- struct ieee80211_channel *channel = &ah->ah_current_channel;
+ struct ieee80211_channel *channel = ah->ah_current_channel;
bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div;
bool use_def_for_sg;
u8 def_ant, tx_ant, ee_mode;
@@ -1897,8 +1928,9 @@
s16 min_pwrL, min_pwrR;
s16 pwr_i;
- if (WARN_ON(stepL[0] == stepL[1] || stepR[0] == stepR[1]))
- return 0;
+ /* Some vendors write the same pcdac value twice !!! */
+ if (stepL[0] == stepL[1] || stepR[0] == stepR[1])
+ return max(pwrL[0], pwrR[0]);
if (pwrL[0] == pwrL[1])
min_pwrL = pwrL[0];
@@ -2166,6 +2198,7 @@
ath5k_get_max_ctl_power(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
struct ath5k_edge_power *rep = ee->ee_ctl_pwr;
u8 *ctl_val = ee->ee_ctl;
@@ -2176,7 +2209,7 @@
u8 ctl_idx = 0xFF;
u32 target = channel->center_freq;
- ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band);
+ ctl_mode = ath_regd_get_band_ctl(regulatory, channel->band);
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
@@ -3011,7 +3044,7 @@
int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
{
/*Just a try M.F.*/
- struct ieee80211_channel *channel = &ah->ah_current_channel;
+ struct ieee80211_channel *channel = ah->ah_current_channel;
u8 ee_mode;
ATH5K_TRACE(ah->ah_sc);
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 73407b3..eeebb9a 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -362,7 +362,7 @@
}
if (tq->tqi_ready_time &&
- (tq->tqi_type != AR5K_TX_QUEUE_ID_CAB))
+ (tq->tqi_type != AR5K_TX_QUEUE_CAB))
ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
AR5K_QCU_RDYTIMECFG_INTVAL) |
AR5K_QCU_RDYTIMECFG_ENABLE,
@@ -411,7 +411,6 @@
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
AR5K_QCU_MISC_FRSHED_BCN_SENT_GT |
AR5K_QCU_MISC_CBREXP_DIS |
- AR5K_QCU_MISC_RDY_VEOL_POLICY |
AR5K_QCU_MISC_CBREXP_BCN_DIS);
ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 6809b54a..debad07 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -339,9 +339,9 @@
#define AR5K_SISR2 0x008c /* Register Address [5211+] */
#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
#define AR5K_SISR2_QCU_TXURN_S 0
-#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */
-#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */
+#define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */
+#define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */
+#define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */
#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
@@ -430,9 +430,9 @@
#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */
#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
#define AR5K_SIMR2_QCU_TXURN_S 0
-#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */
-#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */
+#define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */
+#define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */
+#define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */
#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index bd0a97a..34e13c7 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -258,29 +258,35 @@
if (!set_chip)
goto commit;
- /* Preserve sleep duration */
data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+
+ /* If card is down we 'll get 0xffff... so we
+ * need to clean this up before we write the register
+ */
if (data & 0xffc00000)
data = 0;
else
- data = data & 0xfffcffff;
+ /* Preserve sleep duration etc */
+ data = data & ~AR5K_SLEEP_CTL_SLE;
- ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+ AR5K_SLEEP_CTL);
udelay(15);
- for (i = 50; i > 0; i--) {
+ for (i = 200; i > 0; i--) {
/* Check if the chip did wake up */
if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
AR5K_PCICFG_SPWR_DN) == 0)
break;
/* Wait a bit and retry */
- udelay(200);
- ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ udelay(50);
+ ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+ AR5K_SLEEP_CTL);
}
/* Fail if the chip didn't wake up */
- if (i <= 0)
+ if (i == 0)
return -EIO;
break;
@@ -290,13 +296,70 @@
}
commit:
- ah->ah_power_mode = mode;
ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
return 0;
}
/*
+ * Put device on hold
+ *
+ * Put MAC and Baseband on warm reset and
+ * keep that state (don't clean sleep control
+ * register). After this MAC and Baseband are
+ * disabled and a full reset is needed to come
+ * back. This way we save as much power as possible
+ * without puting the card on full sleep.
+ */
+int ath5k_hw_on_hold(struct ath5k_hw *ah)
+{
+ struct pci_dev *pdev = ah->ah_sc->pdev;
+ u32 bus_flags;
+ int ret;
+
+ /* Make sure device is awake */
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+ return ret;
+ }
+
+ /*
+ * Put chipset on warm reset...
+ *
+ * Note: puting PCI core on warm reset on PCI-E cards
+ * results card to hang and always return 0xffff... so
+ * we ingore that flag for PCI-E cards. On PCI cards
+ * this flag gets cleared after 64 PCI clocks.
+ */
+ bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to put device on warm reset\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!*/
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to put device on hold\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+/*
* Bring up MAC + PHY Chips and program PLL
* TODO: Half/Quarter rate support
*/
@@ -319,6 +382,50 @@
return ret;
}
+ /*
+ * Put chipset on warm reset...
+ *
+ * Note: puting PCI core on warm reset on PCI-E cards
+ * results card to hang and always return 0xffff... so
+ * we ingore that flag for PCI-E cards. On PCI cards
+ * this flag gets cleared after 64 PCI clocks.
+ */
+ bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!...*/
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+ return ret;
+ }
+
+ /* ...clear reset control register and pull device out of
+ * warm reset */
+ if (ath5k_hw_nic_reset(ah, 0)) {
+ ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* On initialization skip PLL programming since we don't have
+ * a channel / mode set yet */
+ if (initial)
+ return 0;
+
if (ah->ah_version != AR5K_AR5210) {
/*
* Get channel mode flags
@@ -384,39 +491,6 @@
AR5K_PHY_TURBO);
}
- /* reseting PCI on PCI-E cards results card to hang
- * and always return 0xffff... so we ingore that flag
- * for PCI-E cards */
- bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
- /* Reset chipset */
- if (ah->ah_version == AR5K_AR5210) {
- ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
- AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
- AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
- mdelay(2);
- } else {
- ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
- AR5K_RESET_CTL_BASEBAND | bus_flags);
- }
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
- return -EIO;
- }
-
- /* ...wakeup again!*/
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
- return ret;
- }
-
- /* ...final warm reset */
- if (ath5k_hw_nic_reset(ah, 0)) {
- ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
- return -EIO;
- }
-
if (ah->ah_version != AR5K_AR5210) {
/* ...update PLL if needed */
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 2d79610..ef5f59c 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -1,13 +1,18 @@
config ATH9K
tristate "Atheros 802.11n wireless cards support"
depends on PCI && MAC80211 && WLAN_80211
- select ATH_COMMON
select MAC80211_LEDS
select LEDS_CLASS
select NEW_LEDS
---help---
This module adds support for wireless adapters based on
- Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
+ Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
+ of chipsets. For a specific list of supported external
+ cards, laptops that already ship with these cards and
+ APs that come with these cards refer to to ath9k wiki
+ products page:
+
+ http://wireless.kernel.org/en/users/Drivers/ath9k/products
If you choose to build a module, it'll be called ath9k.
@@ -18,6 +23,6 @@
Say Y, if you need ath9k to display debug messages.
Pass the debug mask as a module parameter:
- modprobe ath9k debug=0x00002000
+ modprobe ath9k debug=0x00000200
- Look in ath9k/core.h for possible debug masks
+ Look in ath9k/debug.h for possible debug masks
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 783bc39..ff2c9a2 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,5 +1,8 @@
ath9k-y += hw.o \
eeprom.o \
+ eeprom_def.o \
+ eeprom_4k.o \
+ eeprom_9287.o \
mac.o \
calib.o \
ani.o \
@@ -9,7 +12,8 @@
recv.o \
xmit.o \
virtual.o \
- rc.o
+ rc.o \
+ btcoex.o
ath9k-$(CONFIG_PCI) += pci.o
ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 0e65c51..2ad7d02 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -119,17 +119,15 @@
sc->bus_ops = &ath_ahb_bus_ops;
sc->irq = irq;
- ret = ath_attach(AR5416_AR9100_DEVID, sc);
- if (ret != 0) {
- dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
- ret = -ENODEV;
+ ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize device\n");
goto err_free_hw;
}
ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
if (ret) {
- dev_err(&pdev->dev, "request_irq failed, err=%d\n", ret);
- ret = -EIO;
+ dev_err(&pdev->dev, "request_irq failed\n");
goto err_detach;
}
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index aad259b..a7cbb07 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -236,36 +236,35 @@
return;
aniState = ah->curani;
-
aniState->listenTime = 0;
- if (ah->has_hw_phycounters) {
- if (aniState->ofdmTrigHigh > AR_PHY_COUNTMAX) {
- aniState->ofdmPhyErrBase = 0;
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "OFDM Trigger is too high for hw counters\n");
- } else {
- aniState->ofdmPhyErrBase =
- AR_PHY_COUNTMAX - aniState->ofdmTrigHigh;
- }
- if (aniState->cckTrigHigh > AR_PHY_COUNTMAX) {
- aniState->cckPhyErrBase = 0;
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "CCK Trigger is too high for hw counters\n");
- } else {
- aniState->cckPhyErrBase =
- AR_PHY_COUNTMAX - aniState->cckTrigHigh;
- }
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "Writing ofdmbase=%u cckbase=%u\n",
- aniState->ofdmPhyErrBase,
- aniState->cckPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_1, aniState->ofdmPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_2, aniState->cckPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
- REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
- ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
+ if (aniState->ofdmTrigHigh > AR_PHY_COUNTMAX) {
+ aniState->ofdmPhyErrBase = 0;
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "OFDM Trigger is too high for hw counters\n");
+ } else {
+ aniState->ofdmPhyErrBase =
+ AR_PHY_COUNTMAX - aniState->ofdmTrigHigh;
}
+ if (aniState->cckTrigHigh > AR_PHY_COUNTMAX) {
+ aniState->cckPhyErrBase = 0;
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "CCK Trigger is too high for hw counters\n");
+ } else {
+ aniState->cckPhyErrBase =
+ AR_PHY_COUNTMAX - aniState->cckTrigHigh;
+ }
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Writing ofdmbase=%u cckbase=%u\n",
+ aniState->ofdmPhyErrBase,
+ aniState->cckPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_1, aniState->ofdmPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_2, aniState->cckPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+ REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
+
+ ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
+
aniState->ofdmPhyErrCount = 0;
aniState->cckPhyErrCount = 0;
}
@@ -530,32 +529,26 @@
if (aniState->firstepLevel != 0)
ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
aniState->firstepLevel);
- if (ah->has_hw_phycounters) {
- ath9k_hw_setrxfilter(ah, ath9k_hw_getrxfilter(ah) &
- ~ATH9K_RX_FILTER_PHYERR);
- ath9k_ani_restart(ah);
- REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
- REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
- } else {
- ath9k_ani_restart(ah);
- ath9k_hw_setrxfilter(ah, ath9k_hw_getrxfilter(ah) |
- ATH9K_RX_FILTER_PHYERR);
- }
+ ath9k_hw_setrxfilter(ah, ath9k_hw_getrxfilter(ah) &
+ ~ATH9K_RX_FILTER_PHYERR);
+ ath9k_ani_restart(ah);
+ REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
+ REG_WRITE(ah, AR_PHY_ERR_MASK_2, AR_PHY_ERR_CCK_TIMING);
}
void ath9k_hw_ani_monitor(struct ath_hw *ah,
- const struct ath9k_node_stats *stats,
struct ath9k_channel *chan)
{
struct ar5416AniState *aniState;
int32_t listenTime;
+ u32 phyCnt1, phyCnt2;
+ u32 ofdmPhyErrCnt, cckPhyErrCnt;
if (!DO_ANI(ah))
return;
aniState = ah->curani;
- ah->stats.ast_nodestats = *stats;
listenTime = ath9k_hw_ani_get_listen_time(ah);
if (listenTime < 0) {
@@ -566,51 +559,46 @@
aniState->listenTime += listenTime;
- if (ah->has_hw_phycounters) {
- u32 phyCnt1, phyCnt2;
- u32 ofdmPhyErrCnt, cckPhyErrCnt;
+ ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
- ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
+ phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
+ phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
- phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
- phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
-
- if (phyCnt1 < aniState->ofdmPhyErrBase ||
- phyCnt2 < aniState->cckPhyErrBase) {
- if (phyCnt1 < aniState->ofdmPhyErrBase) {
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "phyCnt1 0x%x, resetting "
- "counter value to 0x%x\n",
- phyCnt1, aniState->ofdmPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_1,
- aniState->ofdmPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_MASK_1,
- AR_PHY_ERR_OFDM_TIMING);
- }
- if (phyCnt2 < aniState->cckPhyErrBase) {
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "phyCnt2 0x%x, resetting "
- "counter value to 0x%x\n",
- phyCnt2, aniState->cckPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_2,
- aniState->cckPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_MASK_2,
- AR_PHY_ERR_CCK_TIMING);
- }
- return;
+ if (phyCnt1 < aniState->ofdmPhyErrBase ||
+ phyCnt2 < aniState->cckPhyErrBase) {
+ if (phyCnt1 < aniState->ofdmPhyErrBase) {
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "phyCnt1 0x%x, resetting "
+ "counter value to 0x%x\n",
+ phyCnt1, aniState->ofdmPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_1,
+ aniState->ofdmPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_MASK_1,
+ AR_PHY_ERR_OFDM_TIMING);
}
-
- ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase;
- ah->stats.ast_ani_ofdmerrs +=
- ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
- aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
-
- cckPhyErrCnt = phyCnt2 - aniState->cckPhyErrBase;
- ah->stats.ast_ani_cckerrs +=
- cckPhyErrCnt - aniState->cckPhyErrCount;
- aniState->cckPhyErrCount = cckPhyErrCnt;
+ if (phyCnt2 < aniState->cckPhyErrBase) {
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "phyCnt2 0x%x, resetting "
+ "counter value to 0x%x\n",
+ phyCnt2, aniState->cckPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_2,
+ aniState->cckPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_MASK_2,
+ AR_PHY_ERR_CCK_TIMING);
+ }
+ return;
}
+ ofdmPhyErrCnt = phyCnt1 - aniState->ofdmPhyErrBase;
+ ah->stats.ast_ani_ofdmerrs +=
+ ofdmPhyErrCnt - aniState->ofdmPhyErrCount;
+ aniState->ofdmPhyErrCount = ofdmPhyErrCnt;
+
+ cckPhyErrCnt = phyCnt2 - aniState->cckPhyErrBase;
+ ah->stats.ast_ani_cckerrs +=
+ cckPhyErrCnt - aniState->cckPhyErrCount;
+ aniState->cckPhyErrCount = cckPhyErrCnt;
+
if (aniState->listenTime > 5 * ah->aniperiod) {
if (aniState->ofdmPhyErrCount <= aniState->listenTime *
aniState->ofdmTrigLow / 1000 &&
@@ -632,11 +620,6 @@
}
}
-bool ath9k_hw_phycounters(struct ath_hw *ah)
-{
- return ah->has_hw_phycounters ? true : false;
-}
-
void ath9k_enable_mib_counters(struct ath_hw *ah)
{
DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Enable MIB counters\n");
@@ -708,8 +691,7 @@
* any of the MIB counters overflow/trigger so don't assume we're
* here because a PHY error counter triggered.
*/
-void ath9k_hw_procmibevent(struct ath_hw *ah,
- const struct ath9k_node_stats *stats)
+void ath9k_hw_procmibevent(struct ath_hw *ah)
{
u32 phyCnt1, phyCnt2;
@@ -721,7 +703,6 @@
/* Clear the mib counters and save them in the stats */
ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
- ah->stats.ast_nodestats = *stats;
if (!DO_ANI(ah))
return;
@@ -777,13 +758,11 @@
}
}
-void ath9k_hw_ani_attach(struct ath_hw *ah)
+void ath9k_hw_ani_init(struct ath_hw *ah)
{
int i;
- DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Attach ANI\n");
-
- ah->has_hw_phycounters = 1;
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Initialize ANI\n");
memset(ah->ani, 0, sizeof(ah->ani));
for (i = 0; i < ARRAY_SIZE(ah->ani); i++) {
@@ -799,36 +778,32 @@
ATH9K_ANI_CCK_WEAK_SIG_THR;
ah->ani[i].spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
ah->ani[i].firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
- if (ah->has_hw_phycounters) {
- ah->ani[i].ofdmPhyErrBase =
- AR_PHY_COUNTMAX - ATH9K_ANI_OFDM_TRIG_HIGH;
- ah->ani[i].cckPhyErrBase =
- AR_PHY_COUNTMAX - ATH9K_ANI_CCK_TRIG_HIGH;
- }
+ ah->ani[i].ofdmPhyErrBase =
+ AR_PHY_COUNTMAX - ATH9K_ANI_OFDM_TRIG_HIGH;
+ ah->ani[i].cckPhyErrBase =
+ AR_PHY_COUNTMAX - ATH9K_ANI_CCK_TRIG_HIGH;
}
- if (ah->has_hw_phycounters) {
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "Setting OfdmErrBase = 0x%08x\n",
- ah->ani[0].ofdmPhyErrBase);
- DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
- ah->ani[0].cckPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_1, ah->ani[0].ofdmPhyErrBase);
- REG_WRITE(ah, AR_PHY_ERR_2, ah->ani[0].cckPhyErrBase);
- ath9k_enable_mib_counters(ah);
- }
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Setting OfdmErrBase = 0x%08x\n",
+ ah->ani[0].ofdmPhyErrBase);
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
+ ah->ani[0].cckPhyErrBase);
+
+ REG_WRITE(ah, AR_PHY_ERR_1, ah->ani[0].ofdmPhyErrBase);
+ REG_WRITE(ah, AR_PHY_ERR_2, ah->ani[0].cckPhyErrBase);
+ ath9k_enable_mib_counters(ah);
+
ah->aniperiod = ATH9K_ANI_PERIOD;
if (ah->config.enable_ani)
ah->proc_phyerr |= HAL_PROCESS_ANI;
}
-void ath9k_hw_ani_detach(struct ath_hw *ah)
+void ath9k_hw_ani_disable(struct ath_hw *ah)
{
- DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Detach ANI\n");
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disabling ANI\n");
- if (ah->has_hw_phycounters) {
- ath9k_hw_disable_mib_counters(ah);
- REG_WRITE(ah, AR_PHY_ERR_1, 0);
- REG_WRITE(ah, AR_PHY_ERR_2, 0);
- }
+ ath9k_hw_disable_mib_counters(ah);
+ REG_WRITE(ah, AR_PHY_ERR_1, 0);
+ REG_WRITE(ah, AR_PHY_ERR_2, 0);
}
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 08b4e7e..4e1ab94 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -18,15 +18,10 @@
#define ANI_H
#define HAL_PROCESS_ANI 0x00000001
-#define ATH9K_RSSI_EP_MULTIPLIER (1<<7)
#define DO_ANI(ah) (((ah)->proc_phyerr & HAL_PROCESS_ANI))
-#define HAL_EP_RND(x, mul) \
- ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
-#define BEACON_RSSI(ahp) \
- HAL_EP_RND(ahp->stats.ast_nodestats.ns_avgbrssi, \
- ATH9K_RSSI_EP_MULTIPLIER)
+#define BEACON_RSSI(ahp) (ahp->stats.avgbrssi)
#define ATH9K_ANI_OFDM_TRIG_HIGH 500
#define ATH9K_ANI_OFDM_TRIG_LOW 200
@@ -65,13 +60,6 @@
u32 beacons;
};
-struct ath9k_node_stats {
- u32 ns_avgbrssi;
- u32 ns_avgrssi;
- u32 ns_avgtxrssi;
- u32 ns_avgtxrate;
-};
-
struct ar5416AniState {
struct ath9k_channel *c;
u8 noiseImmunityLevel;
@@ -115,24 +103,21 @@
u32 ast_ani_reset;
u32 ast_ani_lzero;
u32 ast_ani_lneg;
+ u32 avgbrssi;
struct ath9k_mib_stats ast_mibstats;
- struct ath9k_node_stats ast_nodestats;
};
#define ah_mibStats stats.ast_mibstats
void ath9k_ani_reset(struct ath_hw *ah);
void ath9k_hw_ani_monitor(struct ath_hw *ah,
- const struct ath9k_node_stats *stats,
struct ath9k_channel *chan);
-bool ath9k_hw_phycounters(struct ath_hw *ah);
void ath9k_enable_mib_counters(struct ath_hw *ah);
void ath9k_hw_disable_mib_counters(struct ath_hw *ah);
u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hw *ah, u32 *rxc_pcnt,
u32 *rxf_pcnt, u32 *txf_pcnt);
-void ath9k_hw_procmibevent(struct ath_hw *ah,
- const struct ath9k_node_stats *stats);
+void ath9k_hw_procmibevent(struct ath_hw *ah);
void ath9k_hw_ani_setup(struct ath_hw *ah);
-void ath9k_hw_ani_attach(struct ath_hw *ah);
-void ath9k_hw_ani_detach(struct ath_hw *ah);
+void ath9k_hw_ani_init(struct ath_hw *ah);
+void ath9k_hw_ani_disable(struct ath_hw *ah);
#endif /* ANI_H */
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 5efc934..1d59f10 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -25,6 +25,8 @@
#include "hw.h"
#include "rc.h"
#include "debug.h"
+#include "../ath.h"
+#include "btcoex.h"
struct ath_node;
@@ -164,7 +166,6 @@
#define WME_NUM_TID 16
#define ATH_TXBUF 512
#define ATH_TXMAXTRY 13
-#define ATH_11N_TXMAXTRY 10
#define ATH_MGT_TXMAXTRY 4
#define WME_BA_BMP_SIZE 64
#define WME_MAX_BA WME_BA_BMP_SIZE
@@ -191,12 +192,9 @@
#define ATH_AGGR_MIN_QDEPTH 2
#define ATH_AMPDU_SUBFRAME_DEFAULT 32
#define ATH_AMPDU_LIMIT_MAX (64 * 1024 - 1)
-#define ATH_AMPDU_LIMIT_DEFAULT ATH_AMPDU_LIMIT_MAX
#define IEEE80211_SEQ_SEQ_SHIFT 4
#define IEEE80211_SEQ_MAX 4096
-#define IEEE80211_MIN_AMPDU_BUF 0x8
-#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13
#define IEEE80211_WEP_IVLEN 3
#define IEEE80211_WEP_KIDLEN 1
#define IEEE80211_WEP_CRCLEN 4
@@ -226,6 +224,8 @@
#define ATH_DS_TX_BA(_ds) ((_ds)->ds_us.tx.ts_flags & ATH9K_TX_BA)
#define ATH_AN_2_TID(_an, _tidno) (&(_an)->tid[(_tidno)])
+#define ATH_TX_COMPLETE_POLL_INT 1000
+
enum ATH_AGGR_STATUS {
ATH_AGGR_DONE,
ATH_AGGR_BAW_CLOSED,
@@ -239,8 +239,8 @@
spinlock_t axq_lock;
u32 axq_depth;
u8 axq_aggr_depth;
- u32 axq_totalqueued;
bool stopped;
+ bool axq_tx_inprogress;
struct ath_buf *axq_linkbuf;
/* first desc of the last descriptor that contains CTS */
@@ -272,7 +272,6 @@
int sched;
int paused;
u8 state;
- int addba_exchangeattempts;
};
struct ath_atx_ac {
@@ -292,12 +291,28 @@
#define ATH_TX_XRETRY 0x02
#define ATH_TX_BAR 0x04
+#define ATH_RSSI_LPF_LEN 10
+#define RSSI_LPF_THRESHOLD -20
+#define ATH9K_RSSI_BAD 0x80
+#define ATH_RSSI_EP_MULTIPLIER (1<<7)
+#define ATH_EP_MUL(x, mul) ((x) * (mul))
+#define ATH_RSSI_IN(x) (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
+#define ATH_LPF_RSSI(x, y, len) \
+ ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
+#define ATH_RSSI_LPF(x, y) do { \
+ if ((y) >= RSSI_LPF_THRESHOLD) \
+ x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \
+} while (0)
+#define ATH_EP_RND(x, mul) \
+ ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+
struct ath_node {
struct ath_softc *an_sc;
struct ath_atx_tid tid[WME_NUM_TID];
struct ath_atx_ac ac[WME_NUM_AC];
u16 maxampdu;
u8 mpdudensity;
+ int last_rssi;
};
struct ath_tx {
@@ -348,9 +363,9 @@
void ath_tx_tasklet(struct ath_softc *sc);
void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb);
bool ath_tx_aggr_check(struct ath_softc *sc, struct ath_node *an, u8 tidno);
-int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
- u16 tid, u16 *ssn);
-int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
+void ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
+ u16 tid, u16 *ssn);
+void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
/********/
@@ -440,7 +455,8 @@
/* LED Control */
/********************/
-#define ATH_LED_PIN 1
+#define ATH_LED_PIN_DEF 1
+#define ATH_LED_PIN_9287 8
#define ATH_LED_ON_DURATION_IDLE 350 /* in msecs */
#define ATH_LED_OFF_DURATION_IDLE 250 /* in msecs */
@@ -506,6 +522,8 @@
#define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
#define SC_OP_WAIT_FOR_TX_ACK BIT(18)
#define SC_OP_BEACON_SYNC BIT(19)
+#define SC_OP_BTCOEX_ENABLED BIT(20)
+#define SC_OP_BT_PRIORITY_DETECTED BIT(21)
struct ath_bus_ops {
void (*read_cachesize)(struct ath_softc *sc, int *csz);
@@ -519,6 +537,8 @@
struct ieee80211_hw *hw;
struct device *dev;
+ struct ath_common common;
+
spinlock_t wiphy_lock; /* spinlock to protect ath_wiphy data */
struct ath_wiphy *pri_wiphy;
struct ath_wiphy **sec_wiphy; /* secondary wiphys (virtual radios); may
@@ -541,6 +561,8 @@
int irq;
spinlock_t sc_resetlock;
spinlock_t sc_serial_rw;
+ spinlock_t ani_lock;
+ spinlock_t sc_pm_lock;
struct mutex mutex;
u8 curbssid[ETH_ALEN];
@@ -549,7 +571,6 @@
u32 sc_flags; /* SC_OP_* */
u16 curtxpow;
u16 curaid;
- u16 cachelsz;
u8 nbcnvifs;
u16 nvifs;
u8 tx_chainmask;
@@ -557,7 +578,8 @@
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
u8 splitmic;
- atomic_t ps_usecount;
+ bool ps_enabled;
+ unsigned long ps_usecount;
enum ath9k_int imask;
enum ath9k_ht_extprotspacing ht_extprotspacing;
enum ath9k_ht_macmode tx_chan_width;
@@ -584,12 +606,13 @@
int beacon_interval;
struct ath_ani ani;
- struct ath9k_node_stats nodestats;
#ifdef CONFIG_ATH9K_DEBUG
struct ath9k_debug debug;
#endif
struct ath_bus_ops *bus_ops;
struct ath_beacon_config cur_beacon_conf;
+ struct delayed_work tx_complete_work;
+ struct ath_btcoex_info btcoex_info;
};
struct ath_wiphy {
@@ -611,6 +634,16 @@
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
int ath_cabq_update(struct ath_softc *);
+static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
+{
+ return &ah->ah_sc->common;
+}
+
+static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
+{
+ return &(ath9k_hw_common(ah)->regulatory);
+}
+
static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
{
sc->bus_ops->read_cachesize(sc, csz);
@@ -625,7 +658,7 @@
irqreturn_t ath_isr(int irq, void *dev);
void ath_cleanup(struct ath_softc *sc);
-int ath_attach(u16 devid, struct ath_softc *sc);
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid);
void ath_detach(struct ath_softc *sc);
const char *ath_mac_bb_name(u32 mac_bb_version);
const char *ath_rf_name(u16 rf_version);
@@ -654,27 +687,8 @@
static inline void ath_ahb_exit(void) {};
#endif
-static inline void ath9k_ps_wakeup(struct ath_softc *sc)
-{
- if (atomic_inc_return(&sc->ps_usecount) == 1)
- if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE) {
- sc->sc_ah->restore_mode = sc->sc_ah->power_mode;
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
- }
-}
-
-static inline void ath9k_ps_restore(struct ath_softc *sc)
-{
- if (atomic_dec_and_test(&sc->ps_usecount))
- if ((sc->hw->conf.flags & IEEE80211_CONF_PS) &&
- !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA |
- SC_OP_WAIT_FOR_TX_ACK)))
- ath9k_hw_setpower(sc->sc_ah,
- sc->sc_ah->restore_mode);
-}
-
+void ath9k_ps_wakeup(struct ath_softc *sc);
+void ath9k_ps_restore(struct ath_softc *sc);
void ath9k_set_bssid_mask(struct ieee80211_hw *hw);
int ath9k_wiphy_add(struct ath_softc *sc);
@@ -690,8 +704,10 @@
struct ath_wiphy *selected);
bool ath9k_wiphy_scanning(struct ath_softc *sc);
void ath9k_wiphy_work(struct work_struct *work);
+bool ath9k_all_wiphys_idle(struct ath_softc *sc);
void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
+int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
#endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 3639a2e..45c4ea5 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -674,13 +674,6 @@
intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
- /*
- * It looks like mac80211 may end up using beacon interval of zero in
- * some cases (at least for mesh point). Avoid getting into an
- * infinite loop by using a bit safer value instead..
- */
- if (intval == 0)
- intval = 100;
/* Pull nexttbtt forward to reflect the current TSF */
@@ -745,6 +738,14 @@
iftype = sc->sc_ah->opmode;
}
+ /*
+ * It looks like mac80211 may end up using beacon interval of zero in
+ * some cases (at least for mesh point). Avoid getting into an
+ * infinite loop by using a bit safer value instead. To be safe,
+ * do sanity check on beacon interval for all operating modes.
+ */
+ if (cur_conf->beacon_interval == 0)
+ cur_conf->beacon_interval = 100;
switch (iftype) {
case NL80211_IFTYPE_AP:
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
new file mode 100644
index 0000000..55f607b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static const struct ath_btcoex_config ath_bt_config = { 0, true, true,
+ ATH_BT_COEX_MODE_SLOTTED, true, true, 2, 5, true };
+
+static const u16 ath_subsysid_tbl[] = {
+ AR9280_COEX2WIRE_SUBSYSID,
+ AT9285_COEX3WIRE_SA_SUBSYSID,
+ AT9285_COEX3WIRE_DA_SUBSYSID
+};
+
+/*
+ * Checks the subsystem id of the device to see if it
+ * supports btcoex
+ */
+bool ath_btcoex_supported(u16 subsysid)
+{
+ int i;
+
+ if (!subsysid)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++)
+ if (subsysid == ath_subsysid_tbl[i])
+ return true;
+
+ return false;
+}
+
+/*
+ * Detects if there is any priority bt traffic
+ */
+static void ath_detect_bt_priority(struct ath_softc *sc)
+{
+ struct ath_btcoex_info *btinfo = &sc->btcoex_info;
+
+ if (ath9k_hw_gpio_get(sc->sc_ah, btinfo->btpriority_gpio))
+ btinfo->bt_priority_cnt++;
+
+ if (time_after(jiffies, btinfo->bt_priority_time +
+ msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
+ if (btinfo->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
+ DPRINTF(sc, ATH_DBG_BTCOEX,
+ "BT priority traffic detected");
+ sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
+ } else {
+ sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+ }
+
+ btinfo->bt_priority_cnt = 0;
+ btinfo->bt_priority_time = jiffies;
+ }
+}
+
+/*
+ * Configures appropriate weight based on stomp type.
+ */
+static void ath_btcoex_bt_stomp(struct ath_softc *sc,
+ struct ath_btcoex_info *btinfo,
+ int stomp_type)
+{
+
+ switch (stomp_type) {
+ case ATH_BTCOEX_STOMP_ALL:
+ ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
+ AR_STOMP_ALL_WLAN_WGHT);
+ break;
+ case ATH_BTCOEX_STOMP_LOW:
+ ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
+ AR_STOMP_LOW_WLAN_WGHT);
+ break;
+ case ATH_BTCOEX_STOMP_NONE:
+ ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
+ AR_STOMP_NONE_WLAN_WGHT);
+ break;
+ default:
+ DPRINTF(sc, ATH_DBG_BTCOEX, "Invalid Stomptype\n");
+ break;
+ }
+
+ ath9k_hw_btcoex_enable(sc->sc_ah);
+}
+
+/*
+ * This is the master bt coex timer which runs for every
+ * 45ms, bt traffic will be given priority during 55% of this
+ * period while wlan gets remaining 45%
+ */
+
+static void ath_btcoex_period_timer(unsigned long data)
+{
+ struct ath_softc *sc = (struct ath_softc *) data;
+ struct ath_btcoex_info *btinfo = &sc->btcoex_info;
+
+ ath_detect_bt_priority(sc);
+
+ spin_lock_bh(&btinfo->btcoex_lock);
+
+ ath_btcoex_bt_stomp(sc, btinfo, btinfo->bt_stomp_type);
+
+ spin_unlock_bh(&btinfo->btcoex_lock);
+
+ if (btinfo->btcoex_period != btinfo->btcoex_no_stomp) {
+ if (btinfo->hw_timer_enabled)
+ ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
+
+ ath_gen_timer_start(sc->sc_ah,
+ btinfo->no_stomp_timer,
+ (ath9k_hw_gettsf32(sc->sc_ah) +
+ btinfo->btcoex_no_stomp),
+ btinfo->btcoex_no_stomp * 10);
+ btinfo->hw_timer_enabled = true;
+ }
+
+ mod_timer(&btinfo->period_timer, jiffies +
+ msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
+}
+
+/*
+ * Generic tsf based hw timer which configures weight
+ * registers to time slice between wlan and bt traffic
+ */
+
+static void ath_btcoex_no_stomp_timer(void *arg)
+{
+ struct ath_softc *sc = (struct ath_softc *)arg;
+ struct ath_btcoex_info *btinfo = &sc->btcoex_info;
+
+ DPRINTF(sc, ATH_DBG_BTCOEX, "no stomp timer running \n");
+
+ spin_lock_bh(&btinfo->btcoex_lock);
+
+ if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
+ ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_NONE);
+ else if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+ ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_LOW);
+
+ spin_unlock_bh(&btinfo->btcoex_lock);
+}
+
+static int ath_init_btcoex_info(struct ath_hw *hw,
+ struct ath_btcoex_info *btcoex_info)
+{
+ u32 i;
+ int qnum;
+
+ qnum = ath_tx_get_qnum(hw->ah_sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+
+ btcoex_info->bt_coex_mode =
+ (btcoex_info->bt_coex_mode & AR_BT_QCU_THRESH) |
+ SM(ath_bt_config.bt_time_extend, AR_BT_TIME_EXTEND) |
+ SM(ath_bt_config.bt_txstate_extend, AR_BT_TXSTATE_EXTEND) |
+ SM(ath_bt_config.bt_txframe_extend, AR_BT_TX_FRAME_EXTEND) |
+ SM(ath_bt_config.bt_mode, AR_BT_MODE) |
+ SM(ath_bt_config.bt_quiet_collision, AR_BT_QUIET) |
+ SM(ath_bt_config.bt_rxclear_polarity, AR_BT_RX_CLEAR_POLARITY) |
+ SM(ath_bt_config.bt_priority_time, AR_BT_PRIORITY_TIME) |
+ SM(ath_bt_config.bt_first_slot_time, AR_BT_FIRST_SLOT_TIME) |
+ SM(qnum, AR_BT_QCU_THRESH);
+
+ btcoex_info->bt_coex_mode2 =
+ SM(ath_bt_config.bt_hold_rx_clear, AR_BT_HOLD_RX_CLEAR) |
+ SM(ATH_BTCOEX_BMISS_THRESH, AR_BT_BCN_MISS_THRESH) |
+ AR_BT_DISABLE_BT_ANT;
+
+ btcoex_info->bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+
+ btcoex_info->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
+
+ btcoex_info->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
+ btcoex_info->btcoex_period / 100;
+
+ for (i = 0; i < 32; i++)
+ hw->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i;
+
+ setup_timer(&btcoex_info->period_timer, ath_btcoex_period_timer,
+ (unsigned long) hw->ah_sc);
+
+ btcoex_info->no_stomp_timer = ath_gen_timer_alloc(hw,
+ ath_btcoex_no_stomp_timer,
+ ath_btcoex_no_stomp_timer,
+ (void *)hw->ah_sc, AR_FIRST_NDP_TIMER);
+
+ if (btcoex_info->no_stomp_timer == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&btcoex_info->btcoex_lock);
+
+ return 0;
+}
+
+int ath9k_hw_btcoex_init(struct ath_hw *ah)
+{
+ struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+ int ret = 0;
+
+ if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) {
+ /* connect bt_active to baseband */
+ REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+ (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
+ AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
+
+ REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+ AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
+
+ /* Set input mux for bt_active to gpio pin */
+ REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+ AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+ btcoex_info->btactive_gpio);
+
+ /* Configure the desired gpio port for input */
+ ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio);
+ } else {
+ /* btcoex 3-wire */
+ REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+ (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB |
+ AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB));
+
+ /* Set input mux for bt_prority_async and
+ * bt_active_async to GPIO pins */
+ REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+ AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+ btcoex_info->btactive_gpio);
+
+ REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+ AR_GPIO_INPUT_MUX1_BT_PRIORITY,
+ btcoex_info->btpriority_gpio);
+
+ /* Configure the desired GPIO ports for input */
+
+ ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio);
+ ath9k_hw_cfg_gpio_input(ah, btcoex_info->btpriority_gpio);
+
+ ret = ath_init_btcoex_info(ah, btcoex_info);
+ }
+
+ return ret;
+}
+
+void ath9k_hw_btcoex_enable(struct ath_hw *ah)
+{
+ struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+
+ if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) {
+ /* Configure the desired GPIO port for TX_FRAME output */
+ ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
+ AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
+ } else {
+ /*
+ * Program coex mode and weight registers to
+ * enable coex 3-wire
+ */
+ REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_info->bt_coex_mode);
+ REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_info->bt_coex_weights);
+ REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_info->bt_coex_mode2);
+
+ REG_RMW_FIELD(ah, AR_QUIET1,
+ AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
+ REG_RMW_FIELD(ah, AR_PCU_MISC,
+ AR_PCU_BT_ANT_PREVENT_RX, 0);
+
+ ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
+ AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL);
+ }
+
+ REG_RMW(ah, AR_GPIO_PDPU,
+ (0x2 << (btcoex_info->btactive_gpio * 2)),
+ (0x3 << (btcoex_info->btactive_gpio * 2)));
+
+ ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
+}
+
+void ath9k_hw_btcoex_disable(struct ath_hw *ah)
+{
+ struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+
+ ath9k_hw_set_gpio(ah, btcoex_info->wlanactive_gpio, 0);
+
+ ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+
+ if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_3WIRE) {
+ REG_WRITE(ah, AR_BT_COEX_MODE, AR_BT_QUIET | AR_BT_MODE);
+ REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0);
+ REG_WRITE(ah, AR_BT_COEX_MODE2, 0);
+ }
+
+ ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
+}
+
+/*
+ * Pause btcoex timer and bt duty cycle timer
+ */
+void ath_btcoex_timer_pause(struct ath_softc *sc,
+ struct ath_btcoex_info *btinfo)
+{
+
+ del_timer_sync(&btinfo->period_timer);
+
+ if (btinfo->hw_timer_enabled)
+ ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
+
+ btinfo->hw_timer_enabled = false;
+}
+
+/*
+ * (Re)start btcoex timers
+ */
+void ath_btcoex_timer_resume(struct ath_softc *sc,
+ struct ath_btcoex_info *btinfo)
+{
+
+ DPRINTF(sc, ATH_DBG_BTCOEX, "Starting btcoex timers");
+
+ /* make sure duty cycle timer is also stopped when resuming */
+ if (btinfo->hw_timer_enabled)
+ ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
+
+ btinfo->bt_priority_cnt = 0;
+ btinfo->bt_priority_time = jiffies;
+ sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+
+ mod_timer(&btinfo->period_timer, jiffies);
+}
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
new file mode 100644
index 0000000..297b027
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef BTCOEX_H
+#define BTCOEX_H
+
+#define ATH_WLANACTIVE_GPIO 5
+#define ATH_BTACTIVE_GPIO 6
+#define ATH_BTPRIORITY_GPIO 7
+
+#define ATH_BTCOEX_DEF_BT_PERIOD 45
+#define ATH_BTCOEX_DEF_DUTY_CYCLE 55
+#define ATH_BTCOEX_BMISS_THRESH 50
+
+#define ATH_BT_PRIORITY_TIME_THRESHOLD 1000 /* ms */
+#define ATH_BT_CNT_THRESHOLD 3
+
+enum ath_btcoex_scheme {
+ ATH_BTCOEX_CFG_NONE,
+ ATH_BTCOEX_CFG_2WIRE,
+ ATH_BTCOEX_CFG_3WIRE,
+};
+
+enum ath_stomp_type {
+ ATH_BTCOEX_NO_STOMP,
+ ATH_BTCOEX_STOMP_ALL,
+ ATH_BTCOEX_STOMP_LOW,
+ ATH_BTCOEX_STOMP_NONE
+};
+
+enum ath_bt_mode {
+ ATH_BT_COEX_MODE_LEGACY, /* legacy rx_clear mode */
+ ATH_BT_COEX_MODE_UNSLOTTED, /* untimed/unslotted mode */
+ ATH_BT_COEX_MODE_SLOTTED, /* slotted mode */
+ ATH_BT_COEX_MODE_DISALBED, /* coexistence disabled */
+};
+
+struct ath_btcoex_config {
+ u8 bt_time_extend;
+ bool bt_txstate_extend;
+ bool bt_txframe_extend;
+ enum ath_bt_mode bt_mode; /* coexistence mode */
+ bool bt_quiet_collision;
+ bool bt_rxclear_polarity; /* invert rx_clear as WLAN_ACTIVE*/
+ u8 bt_priority_time;
+ u8 bt_first_slot_time;
+ bool bt_hold_rx_clear;
+};
+
+struct ath_btcoex_info {
+ enum ath_btcoex_scheme btcoex_scheme;
+ u8 wlanactive_gpio;
+ u8 btactive_gpio;
+ u8 btpriority_gpio;
+ u8 bt_duty_cycle; /* BT duty cycle in percentage */
+ int bt_stomp_type; /* Types of BT stomping */
+ u32 bt_coex_mode; /* Register setting for AR_BT_COEX_MODE */
+ u32 bt_coex_weights; /* Register setting for AR_BT_COEX_WEIGHT */
+ u32 bt_coex_mode2; /* Register setting for AR_BT_COEX_MODE2 */
+ u32 btcoex_no_stomp; /* in usec */
+ u32 btcoex_period; /* in usec */
+ u32 bt_priority_cnt;
+ unsigned long bt_priority_time;
+ bool hw_timer_enabled;
+ spinlock_t btcoex_lock;
+ struct timer_list period_timer; /* Timer for BT period */
+ struct ath_gen_timer *no_stomp_timer; /*Timer for no BT stomping*/
+};
+
+bool ath_btcoex_supported(u16 subsysid);
+int ath9k_hw_btcoex_init(struct ath_hw *ah);
+void ath9k_hw_btcoex_enable(struct ath_hw *ah);
+void ath9k_hw_btcoex_disable(struct ath_hw *ah);
+void ath_btcoex_timer_resume(struct ath_softc *sc,
+ struct ath_btcoex_info *btinfo);
+void ath_btcoex_timer_pause(struct ath_softc *sc,
+ struct ath_btcoex_info *btinfo);
+
+static inline void ath_btcoex_set_weight(struct ath_btcoex_info *btcoex_info,
+ u32 bt_weight,
+ u32 wlan_weight)
+{
+ btcoex_info->bt_coex_weights = SM(bt_weight, AR_BTCOEX_BT_WGHT) |
+ SM(wlan_weight, AR_BTCOEX_WL_WGHT);
+}
+
+#endif
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index a32d7e7..3234995 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -116,7 +116,7 @@
"NF calibrated [ctl] [chain 1] is %d\n", nf);
nfarray[1] = nf;
- if (!AR_SREV_9280(ah)) {
+ if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
nf = MS(REG_READ(ah, AR_PHY_CH2_CCA),
AR_PHY_CH2_MINCCA_PWR);
if (nf & 0x100)
@@ -154,7 +154,7 @@
"NF calibrated [ext] [chain 1] is %d\n", nf);
nfarray[4] = nf;
- if (!AR_SREV_9280(ah)) {
+ if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
nf = MS(REG_READ(ah, AR_PHY_CH2_EXT_CCA),
AR_PHY_CH2_EXT_MINCCA_PWR);
if (nf & 0x100)
@@ -613,7 +613,7 @@
if (AR_SREV_9285(ah))
chainmask = 0x9;
- else if (AR_SREV_9280(ah))
+ else if (AR_SREV_9280(ah) || AR_SREV_9287(ah))
chainmask = 0x1B;
else
chainmask = 0x3F;
@@ -691,15 +691,22 @@
void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah)
{
int i, j;
+ s16 noise_floor;
+
+ if (AR_SREV_9280(ah))
+ noise_floor = AR_PHY_CCA_MAX_AR9280_GOOD_VALUE;
+ else if (AR_SREV_9285(ah))
+ noise_floor = AR_PHY_CCA_MAX_AR9285_GOOD_VALUE;
+ else
+ noise_floor = AR_PHY_CCA_MAX_AR5416_GOOD_VALUE;
for (i = 0; i < NUM_NF_READINGS; i++) {
ah->nfCalHist[i].currIndex = 0;
- ah->nfCalHist[i].privNF = AR_PHY_CCA_MAX_GOOD_VALUE;
+ ah->nfCalHist[i].privNF = noise_floor;
ah->nfCalHist[i].invalidNFcount =
AR_PHY_CCA_FILTERWINDOW_LENGTH;
for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
- ah->nfCalHist[i].nfCalBuffer[j] =
- AR_PHY_CCA_MAX_GOOD_VALUE;
+ ah->nfCalHist[i].nfCalBuffer[j] = noise_floor;
}
}
}
@@ -722,31 +729,139 @@
static void ath9k_olc_temp_compensation(struct ath_hw *ah)
{
u32 rddata, i;
- int delta, currPDADC, regval;
+ int delta, currPDADC, regval, slope;
rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
-
currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
- if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
- delta = (currPDADC - ah->initPDADC + 4) / 8;
- else
- delta = (currPDADC - ah->initPDADC + 5) / 10;
- if (delta != ah->PDADCdelta) {
- ah->PDADCdelta = delta;
- for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
- regval = ah->originalGain[i] - delta;
- if (regval < 0)
- regval = 0;
+ if (OLC_FOR_AR9287_10_LATER) {
+ if (ah->initPDADC == 0 || currPDADC == 0) {
+ return;
+ } else {
+ slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
+ if (slope == 0)
+ delta = 0;
+ else
+ delta = ((currPDADC - ah->initPDADC)*4) / slope;
+ REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
+ AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+ REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
+ AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+ }
+ } else {
+ if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
+ delta = (currPDADC - ah->initPDADC + 4) / 8;
+ else
+ delta = (currPDADC - ah->initPDADC + 5) / 10;
- REG_RMW_FIELD(ah, AR_PHY_TX_GAIN_TBL1 + i * 4,
- AR_PHY_TX_GAIN, regval);
+ if (delta != ah->PDADCdelta) {
+ ah->PDADCdelta = delta;
+ for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
+ regval = ah->originalGain[i] - delta;
+ if (regval < 0)
+ regval = 0;
+
+ REG_RMW_FIELD(ah, AR_PHY_TX_GAIN_TBL1 + i * 4,
+ AR_PHY_TX_GAIN, regval);
+ }
}
}
}
-static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah)
+static void ath9k_hw_9271_pa_cal(struct ath_hw *ah)
+{
+ u32 regVal;
+ unsigned int i;
+ u32 regList [][2] = {
+ { 0x786c, 0 },
+ { 0x7854, 0 },
+ { 0x7820, 0 },
+ { 0x7824, 0 },
+ { 0x7868, 0 },
+ { 0x783c, 0 },
+ { 0x7838, 0 } ,
+ { 0x7828, 0 } ,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regList); i++)
+ regList[i][1] = REG_READ(ah, regList[i][0]);
+
+ regVal = REG_READ(ah, 0x7834);
+ regVal &= (~(0x1));
+ REG_WRITE(ah, 0x7834, regVal);
+ regVal = REG_READ(ah, 0x9808);
+ regVal |= (0x1 << 27);
+ REG_WRITE(ah, 0x9808, regVal);
+
+ /* 786c,b23,1, pwddac=1 */
+ REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1);
+ /* 7854, b5,1, pdrxtxbb=1 */
+ REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1);
+ /* 7854, b7,1, pdv2i=1 */
+ REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1);
+ /* 7854, b8,1, pddacinterface=1 */
+ REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1);
+ /* 7824,b12,0, offcal=0 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
+ /* 7838, b1,0, pwddb=0 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
+ /* 7820,b11,0, enpacal=0 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
+ /* 7820,b25,1, pdpadrv1=0 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
+ /* 7820,b24,0, pdpadrv2=0 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G1,AR9285_AN_RF2G1_PDPADRV2,0);
+ /* 7820,b23,0, pdpaout=0 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
+ /* 783c,b14-16,7, padrvgn2tab_0=7 */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G8,AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
+ /*
+ * 7838,b29-31,0, padrvgn1tab_0=0
+ * does not matter since we turn it off
+ */
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G7,AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
+
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
+
+ /* Set:
+ * localmode=1,bmode=1,bmoderxtx=1,synthon=1,
+ * txon=1,paon=1,oscon=1,synthon_force=1
+ */
+ REG_WRITE(ah, AR9285_AN_TOP2, 0xca0358a0);
+ udelay(30);
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0);
+
+ /* find off_6_1; */
+ for (i = 6; i >= 0; i--) {
+ regVal = REG_READ(ah, 0x7834);
+ regVal |= (1 << (20 + i));
+ REG_WRITE(ah, 0x7834, regVal);
+ udelay(1);
+ //regVal = REG_READ(ah, 0x7834);
+ regVal &= (~(0x1 << (20 + i)));
+ regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9)
+ << (20 + i));
+ REG_WRITE(ah, 0x7834, regVal);
+ }
+
+ /* Empirical offset correction */
+#if 0
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0x20);
+#endif
+
+ regVal = REG_READ(ah, 0x7834);
+ regVal |= 0x1;
+ REG_WRITE(ah, 0x7834, regVal);
+ regVal = REG_READ(ah, 0x9808);
+ regVal &= (~(0x1 << 27));
+ REG_WRITE(ah, 0x9808, regVal);
+
+ for (i = 0; i < ARRAY_SIZE(regList); i++)
+ REG_WRITE(ah, regList[i][0], regList[i][1]);
+}
+
+static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah, bool is_reset)
{
u32 regVal;
@@ -762,6 +877,13 @@
{ 0x7838, 0 },
};
+ DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
+
+ /* PA CAL is not needed for high power solution */
+ if (ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE) ==
+ AR5416_EEP_TXGAIN_HIGH_POWER)
+ return;
+
if (AR_SREV_9285_11(ah)) {
REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14));
udelay(10);
@@ -784,13 +906,13 @@
REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 1);
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
ccomp_org = MS(REG_READ(ah, AR9285_AN_RF2G6), AR9285_AN_RF2G6_CCOMP);
- REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_CCOMP, 7);
+ REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_CCOMP, 0xf);
REG_WRITE(ah, AR9285_AN_TOP2, 0xca0358a0);
udelay(30);
@@ -802,7 +924,6 @@
regVal |= (1 << (19 + i));
REG_WRITE(ah, 0x7834, regVal);
udelay(1);
- regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1 << (19 + i)));
reg_field = MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9);
regVal |= (reg_field << (19 + i));
@@ -821,6 +942,17 @@
offs_6_1 = offset>>1;
offs_0 = offset & 1;
+ if ((!is_reset) && (ah->pacal_info.prev_offset == offset)) {
+ if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
+ ah->pacal_info.max_skipcount =
+ 2 * ah->pacal_info.max_skipcount;
+ ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
+ } else {
+ ah->pacal_info.max_skipcount = 1;
+ ah->pacal_info.skipcount = 0;
+ ah->pacal_info.prev_offset = offset;
+ }
+
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_OFFS, offs_6_1);
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9285_AN_RF2G3_PDVCCOMP, offs_0);
@@ -862,14 +994,30 @@
}
}
+ /* Do NF cal only at longer intervals */
if (longcal) {
- if (AR_SREV_9285_11_OR_LATER(ah))
- ath9k_hw_9285_pa_cal(ah);
+ /* Do periodic PAOffset Cal */
+ if (AR_SREV_9271(ah))
+ ath9k_hw_9271_pa_cal(ah);
+ else if (AR_SREV_9285_11_OR_LATER(ah)) {
+ if (!ah->pacal_info.skipcount)
+ ath9k_hw_9285_pa_cal(ah, false);
+ else
+ ah->pacal_info.skipcount--;
+ }
- if (OLC_FOR_AR9280_20_LATER)
+ if (OLC_FOR_AR9280_20_LATER || OLC_FOR_AR9287_10_LATER)
ath9k_olc_temp_compensation(ah);
+
+ /* Get the value from the previous NF cal and update history buffer */
ath9k_hw_getnf(ah, chan);
+
+ /*
+ * Load the NF from history buffer of the current channel.
+ * NF is slow time-variant, so it is OK to use a historical value.
+ */
ath9k_hw_loadnf(ah, ah->curchan);
+
ath9k_hw_start_nfcal(ah);
}
@@ -922,8 +1070,11 @@
return false;
} else {
if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
- REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+ if (!AR_SREV_9287_10_OR_LATER(ah))
+ REG_CLR_BIT(ah, AR_PHY_ADC_CTL,
+ AR_PHY_ADC_CTL_OFF_PWDADC);
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+ AR_PHY_AGC_CONTROL_FLTR_CAL);
}
/* Calibrate the AGC */
@@ -941,14 +1092,17 @@
}
if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+ if (!AR_SREV_9287_10_OR_LATER(ah))
+ REG_SET_BIT(ah, AR_PHY_ADC_CTL,
+ AR_PHY_ADC_CTL_OFF_PWDADC);
+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
+ AR_PHY_AGC_CONTROL_FLTR_CAL);
}
}
/* Do PA Calibration */
if (AR_SREV_9285_11_OR_LATER(ah))
- ath9k_hw_9285_pa_cal(ah);
+ ath9k_hw_9285_pa_cal(ah, true);
/* Do NF Calibration after DC offset and other calibrations */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index fe5367f..019bcbb 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -25,7 +25,9 @@
extern const struct ath9k_percal_data adc_dc_cal_single_sample;
extern const struct ath9k_percal_data adc_init_dc_cal;
-#define AR_PHY_CCA_MAX_GOOD_VALUE -85
+#define AR_PHY_CCA_MAX_AR5416_GOOD_VALUE -85
+#define AR_PHY_CCA_MAX_AR9280_GOOD_VALUE -112
+#define AR_PHY_CCA_MAX_AR9285_GOOD_VALUE -118
#define AR_PHY_CCA_MAX_HIGH_VALUE -62
#define AR_PHY_CCA_MIN_BAD_VALUE -140
#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3
@@ -108,6 +110,13 @@
u8 invalidNFcount;
};
+#define MAX_PACAL_SKIPCOUNT 8
+struct ath9k_pacal_info{
+ int32_t prev_offset; /* Previous value of PA offset value */
+ int8_t max_skipcount; /* Max No. of times PACAL can be skipped */
+ int8_t skipcount; /* No. of times the PACAL to be skipped */
+};
+
bool ath9k_hw_reset_calvalid(struct ath_hw *ah);
void ath9k_hw_start_nfcal(struct ath_hw *ah);
void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan);
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 6d20725..2be4c22 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -93,6 +93,8 @@
int i, qcuOffset = 0, dcuOffset = 0;
u32 *qcuBase = &val[0], *dcuBase = &val[4];
+ ath9k_ps_wakeup(sc);
+
REG_WRITE(ah, AR_MACMISC,
((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
(AR_MACMISC_MISC_OBS_BUS_1 <<
@@ -159,6 +161,8 @@
len += snprintf(buf + len, sizeof(buf) - len,
"AR_CR: 0x%x \n", REG_READ(ah, AR_CR));
+ ath9k_ps_restore(sc);
+
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
@@ -486,6 +490,83 @@
.owner = THIS_MODULE
};
+#define PR(str, elem) \
+ do { \
+ len += snprintf(buf + len, size - len, \
+ "%s%13u%11u%10u%10u\n", str, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_BE]].elem, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_BK]].elem, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_VI]].elem, \
+ sc->debug.stats.txstats[sc->tx.hwq_map[ATH9K_WME_AC_VO]].elem); \
+} while(0)
+
+static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ char *buf;
+ unsigned int len = 0, size = 2048;
+ ssize_t retval = 0;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return 0;
+
+ len += sprintf(buf, "%30s %10s%10s%10s\n\n", "BE", "BK", "VI", "VO");
+
+ PR("MPDUs Queued: ", queued);
+ PR("MPDUs Completed: ", completed);
+ PR("Aggregates: ", a_aggr);
+ PR("AMPDUs Queued: ", a_queued);
+ PR("AMPDUs Completed:", a_completed);
+ PR("AMPDUs Retried: ", a_retries);
+ PR("AMPDUs XRetried: ", a_xretries);
+ PR("FIFO Underrun: ", fifo_underrun);
+ PR("TXOP Exceeded: ", xtxop);
+ PR("TXTIMER Expiry: ", timer_exp);
+ PR("DESC CFG Error: ", desc_cfg_err);
+ PR("DATA Underrun: ", data_underrun);
+ PR("DELIM Underrun: ", delim_underrun);
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+}
+
+void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq,
+ struct ath_buf *bf)
+{
+ struct ath_desc *ds = bf->bf_desc;
+
+ if (bf_isampdu(bf)) {
+ if (bf_isxretried(bf))
+ TX_STAT_INC(txq->axq_qnum, a_xretries);
+ else
+ TX_STAT_INC(txq->axq_qnum, a_completed);
+ } else {
+ TX_STAT_INC(txq->axq_qnum, completed);
+ }
+
+ if (ds->ds_txstat.ts_status & ATH9K_TXERR_FIFO)
+ TX_STAT_INC(txq->axq_qnum, fifo_underrun);
+ if (ds->ds_txstat.ts_status & ATH9K_TXERR_XTXOP)
+ TX_STAT_INC(txq->axq_qnum, xtxop);
+ if (ds->ds_txstat.ts_status & ATH9K_TXERR_TIMER_EXPIRED)
+ TX_STAT_INC(txq->axq_qnum, timer_exp);
+ if (ds->ds_txstat.ts_flags & ATH9K_TX_DESC_CFG_ERR)
+ TX_STAT_INC(txq->axq_qnum, desc_cfg_err);
+ if (ds->ds_txstat.ts_flags & ATH9K_TX_DATA_UNDERRUN)
+ TX_STAT_INC(txq->axq_qnum, data_underrun);
+ if (ds->ds_txstat.ts_flags & ATH9K_TX_DELIM_UNDERRUN)
+ TX_STAT_INC(txq->axq_qnum, delim_underrun);
+}
+
+static const struct file_operations fops_xmit = {
+ .read = read_file_xmit,
+ .open = ath9k_debugfs_open,
+ .owner = THIS_MODULE
+};
int ath9k_init_debug(struct ath_softc *sc)
{
@@ -500,35 +581,42 @@
goto err;
sc->debug.debugfs_debug = debugfs_create_file("debug",
- S_IRUGO | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_debug);
+ S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_debug);
if (!sc->debug.debugfs_debug)
goto err;
- sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUGO,
+ sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUSR,
sc->debug.debugfs_phy, sc, &fops_dma);
if (!sc->debug.debugfs_dma)
goto err;
sc->debug.debugfs_interrupt = debugfs_create_file("interrupt",
- S_IRUGO,
+ S_IRUSR,
sc->debug.debugfs_phy,
sc, &fops_interrupt);
if (!sc->debug.debugfs_interrupt)
goto err;
sc->debug.debugfs_rcstat = debugfs_create_file("rcstat",
- S_IRUGO,
+ S_IRUSR,
sc->debug.debugfs_phy,
sc, &fops_rcstat);
if (!sc->debug.debugfs_rcstat)
goto err;
sc->debug.debugfs_wiphy = debugfs_create_file(
- "wiphy", S_IRUGO | S_IWUSR, sc->debug.debugfs_phy, sc,
+ "wiphy", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc,
&fops_wiphy);
if (!sc->debug.debugfs_wiphy)
goto err;
+ sc->debug.debugfs_xmit = debugfs_create_file("xmit",
+ S_IRUSR,
+ sc->debug.debugfs_phy,
+ sc, &fops_xmit);
+ if (!sc->debug.debugfs_xmit)
+ goto err;
+
return 0;
err:
ath9k_exit_debug(sc);
@@ -537,6 +625,7 @@
void ath9k_exit_debug(struct ath_softc *sc)
{
+ debugfs_remove(sc->debug.debugfs_xmit);
debugfs_remove(sc->debug.debugfs_wiphy);
debugfs_remove(sc->debug.debugfs_rcstat);
debugfs_remove(sc->debug.debugfs_interrupt);
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index edda15b..7241f47 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -30,11 +30,22 @@
ATH_DBG_CONFIG = 0x00000200,
ATH_DBG_FATAL = 0x00000400,
ATH_DBG_PS = 0x00000800,
+ ATH_DBG_HWTIMER = 0x00001000,
+ ATH_DBG_BTCOEX = 0x00002000,
ATH_DBG_ANY = 0xffffffff
};
#define DBG_DEFAULT (ATH_DBG_FATAL)
+struct ath_txq;
+struct ath_buf;
+
+#ifdef CONFIG_ATH9K_DEBUG
+#define TX_STAT_INC(q, c) sc->debug.stats.txstats[q].c++
+#else
+#define TX_STAT_INC(q, c) do { } while (0)
+#endif
+
#ifdef CONFIG_ATH9K_DEBUG
/**
@@ -87,9 +98,45 @@
u8 per;
};
+/**
+ * struct ath_tx_stats - Statistics about TX
+ * @queued: Total MPDUs (non-aggr) queued
+ * @completed: Total MPDUs (non-aggr) completed
+ * @a_aggr: Total no. of aggregates queued
+ * @a_queued: Total AMPDUs queued
+ * @a_completed: Total AMPDUs completed
+ * @a_retries: No. of AMPDUs retried (SW)
+ * @a_xretries: No. of AMPDUs dropped due to xretries
+ * @fifo_underrun: FIFO underrun occurrences
+ Valid only for:
+ - non-aggregate condition.
+ - first packet of aggregate.
+ * @xtxop: No. of frames filtered because of TXOP limit
+ * @timer_exp: Transmit timer expiry
+ * @desc_cfg_err: Descriptor configuration errors
+ * @data_urn: TX data underrun errors
+ * @delim_urn: TX delimiter underrun errors
+ */
+struct ath_tx_stats {
+ u32 queued;
+ u32 completed;
+ u32 a_aggr;
+ u32 a_queued;
+ u32 a_completed;
+ u32 a_retries;
+ u32 a_xretries;
+ u32 fifo_underrun;
+ u32 xtxop;
+ u32 timer_exp;
+ u32 desc_cfg_err;
+ u32 data_underrun;
+ u32 delim_underrun;
+};
+
struct ath_stats {
struct ath_interrupt_stats istats;
struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
+ struct ath_tx_stats txstats[ATH9K_NUM_TX_QUEUES];
};
struct ath9k_debug {
@@ -100,6 +147,7 @@
struct dentry *debugfs_interrupt;
struct dentry *debugfs_rcstat;
struct dentry *debugfs_wiphy;
+ struct dentry *debugfs_xmit;
struct ath_stats stats;
};
@@ -110,6 +158,8 @@
void ath9k_debug_remove_root(void);
void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb);
+void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq,
+ struct ath_buf *bf);
void ath_debug_stat_retries(struct ath_softc *sc, int rix,
int xretries, int retries, u8 per);
@@ -148,6 +198,12 @@
{
}
+static inline void ath_debug_stat_tx(struct ath_softc *sc,
+ struct ath_txq *txq,
+ struct ath_buf *bf)
+{
+}
+
static inline void ath_debug_stat_retries(struct ath_softc *sc, int rix,
int xretries, int retries, u8 per)
{
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index ce0e86c..b6e52d0 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -16,9 +16,16 @@
#include "ath9k.h"
-static void ath9k_hw_analog_shift_rmw(struct ath_hw *ah,
- u32 reg, u32 mask,
- u32 shift, u32 val)
+static inline u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
+{
+ if (fbin == AR5416_BCHAN_UNUSED)
+ return fbin;
+
+ return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
+}
+
+void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
+ u32 shift, u32 val)
{
u32 regVal;
@@ -33,19 +40,8 @@
return;
}
-static inline u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
-{
-
- if (fbin == AR5416_BCHAN_UNUSED)
- return fbin;
-
- return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
-}
-
-static inline int16_t ath9k_hw_interpolate(u16 target,
- u16 srcLeft, u16 srcRight,
- int16_t targetLeft,
- int16_t targetRight)
+int16_t ath9k_hw_interpolate(u16 target, u16 srcLeft, u16 srcRight,
+ int16_t targetLeft, int16_t targetRight)
{
int16_t rv;
@@ -59,9 +55,8 @@
return rv;
}
-static inline bool ath9k_hw_get_lower_upper_index(u8 target, u8 *pList,
- u16 listSize, u16 *indexL,
- u16 *indexR)
+bool ath9k_hw_get_lower_upper_index(u8 target, u8 *pList, u16 listSize,
+ u16 *indexL, u16 *indexR)
{
u16 i;
@@ -88,16 +83,16 @@
return false;
}
-static inline bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data)
+bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data)
{
struct ath_softc *sc = ah->ah_sc;
return sc->bus_ops->eeprom_read(ah, off, data);
}
-static inline bool ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
- u8 *pVpdList, u16 numIntercepts,
- u8 *pRetVpdList)
+void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
+ u8 *pVpdList, u16 numIntercepts,
+ u8 *pRetVpdList)
{
u16 i, k;
u8 currPwr = pwrMin;
@@ -120,16 +115,14 @@
pRetVpdList[i] = (u8) k;
currPwr += 2;
}
-
- return true;
}
-static void ath9k_hw_get_legacy_target_powers(struct ath_hw *ah,
- struct ath9k_channel *chan,
- struct cal_target_power_leg *powInfo,
- u16 numChannels,
- struct cal_target_power_leg *pNewPower,
- u16 numRates, bool isExtTarget)
+void ath9k_hw_get_legacy_target_powers(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_target_power_leg *powInfo,
+ u16 numChannels,
+ struct cal_target_power_leg *pNewPower,
+ u16 numRates, bool isExtTarget)
{
struct chan_centers centers;
u16 clo, chi;
@@ -150,10 +143,10 @@
IS_CHAN_2GHZ(chan))) {
matchIndex = i;
break;
- } else if ((freq < ath9k_hw_fbin2freq(powInfo[i].bChannel,
- IS_CHAN_2GHZ(chan))) &&
- (freq > ath9k_hw_fbin2freq(powInfo[i - 1].bChannel,
- IS_CHAN_2GHZ(chan)))) {
+ } else if (freq < ath9k_hw_fbin2freq(powInfo[i].bChannel,
+ IS_CHAN_2GHZ(chan)) && i > 0 &&
+ freq > ath9k_hw_fbin2freq(powInfo[i - 1].bChannel,
+ IS_CHAN_2GHZ(chan))) {
lowIndex = i - 1;
break;
}
@@ -179,75 +172,12 @@
}
}
-static void ath9k_get_txgain_index(struct ath_hw *ah,
- struct ath9k_channel *chan,
- struct calDataPerFreqOpLoop *rawDatasetOpLoop,
- u8 *calChans, u16 availPiers, u8 *pwr, u8 *pcdacIdx)
-{
- u8 pcdac, i = 0;
- u16 idxL = 0, idxR = 0, numPiers;
- bool match;
- struct chan_centers centers;
-
- ath9k_hw_get_channel_centers(ah, chan, ¢ers);
-
- for (numPiers = 0; numPiers < availPiers; numPiers++)
- if (calChans[numPiers] == AR5416_BCHAN_UNUSED)
- break;
-
- match = ath9k_hw_get_lower_upper_index(
- (u8)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)),
- calChans, numPiers, &idxL, &idxR);
- if (match) {
- pcdac = rawDatasetOpLoop[idxL].pcdac[0][0];
- *pwr = rawDatasetOpLoop[idxL].pwrPdg[0][0];
- } else {
- pcdac = rawDatasetOpLoop[idxR].pcdac[0][0];
- *pwr = (rawDatasetOpLoop[idxL].pwrPdg[0][0] +
- rawDatasetOpLoop[idxR].pwrPdg[0][0])/2;
- }
-
- while (pcdac > ah->originalGain[i] &&
- i < (AR9280_TX_GAIN_TABLE_SIZE - 1))
- i++;
-
- *pcdacIdx = i;
- return;
-}
-
-static void ath9k_olc_get_pdadcs(struct ath_hw *ah,
- u32 initTxGain,
- int txPower,
- u8 *pPDADCValues)
-{
- u32 i;
- u32 offset;
-
- REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_0,
- AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
- REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_1,
- AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
-
- REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL7,
- AR_PHY_TX_PWRCTRL_INIT_TX_GAIN, initTxGain);
-
- offset = txPower;
- for (i = 0; i < AR5416_NUM_PDADC_VALUES; i++)
- if (i < offset)
- pPDADCValues[i] = 0x0;
- else
- pPDADCValues[i] = 0xFF;
-}
-
-
-
-
-static void ath9k_hw_get_target_powers(struct ath_hw *ah,
- struct ath9k_channel *chan,
- struct cal_target_power_ht *powInfo,
- u16 numChannels,
- struct cal_target_power_ht *pNewPower,
- u16 numRates, bool isHt40Target)
+void ath9k_hw_get_target_powers(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_target_power_ht *powInfo,
+ u16 numChannels,
+ struct cal_target_power_ht *pNewPower,
+ u16 numRates, bool isHt40Target)
{
struct chan_centers centers;
u16 clo, chi;
@@ -268,10 +198,10 @@
matchIndex = i;
break;
} else
- if ((freq < ath9k_hw_fbin2freq(powInfo[i].bChannel,
- IS_CHAN_2GHZ(chan))) &&
- (freq > ath9k_hw_fbin2freq(powInfo[i - 1].bChannel,
- IS_CHAN_2GHZ(chan)))) {
+ if (freq < ath9k_hw_fbin2freq(powInfo[i].bChannel,
+ IS_CHAN_2GHZ(chan)) && i > 0 &&
+ freq > ath9k_hw_fbin2freq(powInfo[i - 1].bChannel,
+ IS_CHAN_2GHZ(chan))) {
lowIndex = i - 1;
break;
}
@@ -297,9 +227,8 @@
}
}
-static u16 ath9k_hw_get_max_edge_power(u16 freq,
- struct cal_ctl_edges *pRdEdgesPower,
- bool is2GHz, int num_band_edges)
+u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower,
+ bool is2GHz, int num_band_edges)
{
u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
int i;
@@ -325,2451 +254,14 @@
return twiceMaxEdgePower;
}
-/****************************************/
-/* EEPROM Operations for 4K sized cards */
-/****************************************/
-
-static int ath9k_hw_4k_get_eeprom_ver(struct ath_hw *ah)
-{
- return ((ah->eeprom.map4k.baseEepHeader.version >> 12) & 0xF);
-}
-
-static int ath9k_hw_4k_get_eeprom_rev(struct ath_hw *ah)
-{
- return ((ah->eeprom.map4k.baseEepHeader.version) & 0xFFF);
-}
-
-static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
-{
-#define SIZE_EEPROM_4K (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
- u16 *eep_data = (u16 *)&ah->eeprom.map4k;
- int addr, eep_start_loc = 0;
-
- eep_start_loc = 64;
-
- if (!ath9k_hw_use_flash(ah)) {
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "Reading from EEPROM, not flash\n");
- }
-
- for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
- if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "Unable to read eeprom region \n");
- return false;
- }
- eep_data++;
- }
-
- return true;
-#undef SIZE_EEPROM_4K
-}
-
-static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
-{
-#define EEPROM_4K_SIZE (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
- struct ar5416_eeprom_4k *eep =
- (struct ar5416_eeprom_4k *) &ah->eeprom.map4k;
- u16 *eepdata, temp, magic, magic2;
- u32 sum = 0, el;
- bool need_swap = false;
- int i, addr;
-
-
- if (!ath9k_hw_use_flash(ah)) {
- if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
- &magic)) {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
- "Reading Magic # failed\n");
- return false;
- }
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "Read Magic = 0x%04X\n", magic);
-
- if (magic != AR5416_EEPROM_MAGIC) {
- magic2 = swab16(magic);
-
- if (magic2 == AR5416_EEPROM_MAGIC) {
- need_swap = true;
- eepdata = (u16 *) (&ah->eeprom);
-
- for (addr = 0; addr < EEPROM_4K_SIZE; addr++) {
- temp = swab16(*eepdata);
- *eepdata = temp;
- eepdata++;
- }
- } else {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
- "Invalid EEPROM Magic. "
- "endianness mismatch.\n");
- return -EINVAL;
- }
- }
- }
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
- need_swap ? "True" : "False");
-
- if (need_swap)
- el = swab16(ah->eeprom.map4k.baseEepHeader.length);
- else
- el = ah->eeprom.map4k.baseEepHeader.length;
-
- if (el > sizeof(struct ar5416_eeprom_4k))
- el = sizeof(struct ar5416_eeprom_4k) / sizeof(u16);
- else
- el = el / sizeof(u16);
-
- eepdata = (u16 *)(&ah->eeprom);
-
- for (i = 0; i < el; i++)
- sum ^= *eepdata++;
-
- if (need_swap) {
- u32 integer;
- u16 word;
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "EEPROM Endianness is not native.. Changing\n");
-
- word = swab16(eep->baseEepHeader.length);
- eep->baseEepHeader.length = word;
-
- word = swab16(eep->baseEepHeader.checksum);
- eep->baseEepHeader.checksum = word;
-
- word = swab16(eep->baseEepHeader.version);
- eep->baseEepHeader.version = word;
-
- word = swab16(eep->baseEepHeader.regDmn[0]);
- eep->baseEepHeader.regDmn[0] = word;
-
- word = swab16(eep->baseEepHeader.regDmn[1]);
- eep->baseEepHeader.regDmn[1] = word;
-
- word = swab16(eep->baseEepHeader.rfSilent);
- eep->baseEepHeader.rfSilent = word;
-
- word = swab16(eep->baseEepHeader.blueToothOptions);
- eep->baseEepHeader.blueToothOptions = word;
-
- word = swab16(eep->baseEepHeader.deviceCap);
- eep->baseEepHeader.deviceCap = word;
-
- integer = swab32(eep->modalHeader.antCtrlCommon);
- eep->modalHeader.antCtrlCommon = integer;
-
- for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
- integer = swab32(eep->modalHeader.antCtrlChain[i]);
- eep->modalHeader.antCtrlChain[i] = integer;
- }
-
- for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
- word = swab16(eep->modalHeader.spurChans[i].spurChan);
- eep->modalHeader.spurChans[i].spurChan = word;
- }
- }
-
- if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
- ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
- "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
- sum, ah->eep_ops->get_eeprom_ver(ah));
- return -EINVAL;
- }
-
- return 0;
-#undef EEPROM_4K_SIZE
-}
-
-static u32 ath9k_hw_4k_get_eeprom(struct ath_hw *ah,
- enum eeprom_param param)
-{
- struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
- struct modal_eep_4k_header *pModal = &eep->modalHeader;
- struct base_eep_header_4k *pBase = &eep->baseEepHeader;
-
- switch (param) {
- case EEP_NFTHRESH_2:
- return pModal->noiseFloorThreshCh[0];
- case AR_EEPROM_MAC(0):
- return pBase->macAddr[0] << 8 | pBase->macAddr[1];
- case AR_EEPROM_MAC(1):
- return pBase->macAddr[2] << 8 | pBase->macAddr[3];
- case AR_EEPROM_MAC(2):
- return pBase->macAddr[4] << 8 | pBase->macAddr[5];
- case EEP_REG_0:
- return pBase->regDmn[0];
- case EEP_REG_1:
- return pBase->regDmn[1];
- case EEP_OP_CAP:
- return pBase->deviceCap;
- case EEP_OP_MODE:
- return pBase->opCapFlags;
- case EEP_RF_SILENT:
- return pBase->rfSilent;
- case EEP_OB_2:
- return pModal->ob_01;
- case EEP_DB_2:
- return pModal->db1_01;
- case EEP_MINOR_REV:
- return pBase->version & AR5416_EEP_VER_MINOR_MASK;
- case EEP_TX_MASK:
- return pBase->txMask;
- case EEP_RX_MASK:
- return pBase->rxMask;
- case EEP_FRAC_N_5G:
- return 0;
- default:
- return 0;
- }
-}
-
-static void ath9k_hw_get_4k_gain_boundaries_pdadcs(struct ath_hw *ah,
- struct ath9k_channel *chan,
- struct cal_data_per_freq_4k *pRawDataSet,
- u8 *bChans, u16 availPiers,
- u16 tPdGainOverlap, int16_t *pMinCalPower,
- u16 *pPdGainBoundaries, u8 *pPDADCValues,
- u16 numXpdGains)
-{
-#define TMP_VAL_VPD_TABLE \
- ((vpdTableI[i][sizeCurrVpdTable - 1] + (ss - maxIndex + 1) * vpdStep));
- int i, j, k;
- int16_t ss;
- u16 idxL = 0, idxR = 0, numPiers;
- static u8 vpdTableL[AR5416_EEP4K_NUM_PD_GAINS]
- [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
- static u8 vpdTableR[AR5416_EEP4K_NUM_PD_GAINS]
- [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
- static u8 vpdTableI[AR5416_EEP4K_NUM_PD_GAINS]
- [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-
- u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
- u8 minPwrT4[AR5416_EEP4K_NUM_PD_GAINS];
- u8 maxPwrT4[AR5416_EEP4K_NUM_PD_GAINS];
- int16_t vpdStep;
- int16_t tmpVal;
- u16 sizeCurrVpdTable, maxIndex, tgtIndex;
- bool match;
- int16_t minDelta = 0;
- struct chan_centers centers;
-#define PD_GAIN_BOUNDARY_DEFAULT 58;
-
- ath9k_hw_get_channel_centers(ah, chan, ¢ers);
-
- for (numPiers = 0; numPiers < availPiers; numPiers++) {
- if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
- break;
- }
-
- match = ath9k_hw_get_lower_upper_index(
- (u8)FREQ2FBIN(centers.synth_center,
- IS_CHAN_2GHZ(chan)), bChans, numPiers,
- &idxL, &idxR);
-
- if (match) {
- for (i = 0; i < numXpdGains; i++) {
- minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
- maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
- ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
- pRawDataSet[idxL].pwrPdg[i],
- pRawDataSet[idxL].vpdPdg[i],
- AR5416_EEP4K_PD_GAIN_ICEPTS,
- vpdTableI[i]);
- }
- } else {
- for (i = 0; i < numXpdGains; i++) {
- pVpdL = pRawDataSet[idxL].vpdPdg[i];
- pPwrL = pRawDataSet[idxL].pwrPdg[i];
- pVpdR = pRawDataSet[idxR].vpdPdg[i];
- pPwrR = pRawDataSet[idxR].pwrPdg[i];
-
- minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
-
- maxPwrT4[i] =
- min(pPwrL[AR5416_EEP4K_PD_GAIN_ICEPTS - 1],
- pPwrR[AR5416_EEP4K_PD_GAIN_ICEPTS - 1]);
-
-
- ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
- pPwrL, pVpdL,
- AR5416_EEP4K_PD_GAIN_ICEPTS,
- vpdTableL[i]);
- ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
- pPwrR, pVpdR,
- AR5416_EEP4K_PD_GAIN_ICEPTS,
- vpdTableR[i]);
-
- for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
- vpdTableI[i][j] =
- (u8)(ath9k_hw_interpolate((u16)
- FREQ2FBIN(centers.
- synth_center,
- IS_CHAN_2GHZ
- (chan)),
- bChans[idxL], bChans[idxR],
- vpdTableL[i][j], vpdTableR[i][j]));
- }
- }
- }
-
- *pMinCalPower = (int16_t)(minPwrT4[0] / 2);
-
- k = 0;
-
- for (i = 0; i < numXpdGains; i++) {
- if (i == (numXpdGains - 1))
- pPdGainBoundaries[i] =
- (u16)(maxPwrT4[i] / 2);
- else
- pPdGainBoundaries[i] =
- (u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
-
- pPdGainBoundaries[i] =
- min((u16)AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);
-
- if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
- minDelta = pPdGainBoundaries[0] - 23;
- pPdGainBoundaries[0] = 23;
- } else {
- minDelta = 0;
- }
-
- if (i == 0) {
- if (AR_SREV_9280_10_OR_LATER(ah))
- ss = (int16_t)(0 - (minPwrT4[i] / 2));
- else
- ss = 0;
- } else {
- ss = (int16_t)((pPdGainBoundaries[i - 1] -
- (minPwrT4[i] / 2)) -
- tPdGainOverlap + 1 + minDelta);
- }
- vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
- vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
- while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
- tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
- pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
- ss++;
- }
-
- sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
- tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
- (minPwrT4[i] / 2));
- maxIndex = (tgtIndex < sizeCurrVpdTable) ?
- tgtIndex : sizeCurrVpdTable;
-
- while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1)))
- pPDADCValues[k++] = vpdTableI[i][ss++];
-
- vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
- vpdTableI[i][sizeCurrVpdTable - 2]);
- vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
- if (tgtIndex >= maxIndex) {
- while ((ss <= tgtIndex) &&
- (k < (AR5416_NUM_PDADC_VALUES - 1))) {
- tmpVal = (int16_t) TMP_VAL_VPD_TABLE;
- pPDADCValues[k++] = (u8)((tmpVal > 255) ?
- 255 : tmpVal);
- ss++;
- }
- }
- }
-
- while (i < AR5416_EEP4K_PD_GAINS_IN_MASK) {
- pPdGainBoundaries[i] = PD_GAIN_BOUNDARY_DEFAULT;
- i++;
- }
-
- while (k < AR5416_NUM_PDADC_VALUES) {
- pPDADCValues[k] = pPDADCValues[k - 1];
- k++;
- }
-
- return;
-#undef TMP_VAL_VPD_TABLE
-}
-
-static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
- struct ath9k_channel *chan,
- int16_t *pTxPowerIndexOffset)
-{
- struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
- struct cal_data_per_freq_4k *pRawDataset;
- u8 *pCalBChans = NULL;
- u16 pdGainOverlap_t2;
- static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
- u16 gainBoundaries[AR5416_EEP4K_PD_GAINS_IN_MASK];
- u16 numPiers, i, j;
- int16_t tMinCalPower;
- u16 numXpdGain, xpdMask;
- u16 xpdGainValues[AR5416_EEP4K_NUM_PD_GAINS] = { 0, 0 };
- u32 reg32, regOffset, regChainOffset;
-
- xpdMask = pEepData->modalHeader.xpdGain;
-
- if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_2) {
- pdGainOverlap_t2 =
- pEepData->modalHeader.pdGainOverlap;
- } else {
- pdGainOverlap_t2 = (u16)(MS(REG_READ(ah, AR_PHY_TPCRG5),
- AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
- }
-
- pCalBChans = pEepData->calFreqPier2G;
- numPiers = AR5416_EEP4K_NUM_2G_CAL_PIERS;
-
- numXpdGain = 0;
-
- for (i = 1; i <= AR5416_EEP4K_PD_GAINS_IN_MASK; i++) {
- if ((xpdMask >> (AR5416_EEP4K_PD_GAINS_IN_MASK - i)) & 1) {
- if (numXpdGain >= AR5416_EEP4K_NUM_PD_GAINS)
- break;
- xpdGainValues[numXpdGain] =
- (u16)(AR5416_EEP4K_PD_GAINS_IN_MASK - i);
- numXpdGain++;
- }
- }
-
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
- (numXpdGain - 1) & 0x3);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
- xpdGainValues[0]);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
- xpdGainValues[1]);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, 0);
-
- for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
- if (AR_SREV_5416_20_OR_LATER(ah) &&
- (ah->rxchainmask == 5 || ah->txchainmask == 5) &&
- (i != 0)) {
- regChainOffset = (i == 1) ? 0x2000 : 0x1000;
- } else
- regChainOffset = i * 0x1000;
-
- if (pEepData->baseEepHeader.txMask & (1 << i)) {
- pRawDataset = pEepData->calPierData2G[i];
-
- ath9k_hw_get_4k_gain_boundaries_pdadcs(ah, chan,
- pRawDataset, pCalBChans,
- numPiers, pdGainOverlap_t2,
- &tMinCalPower, gainBoundaries,
- pdadcValues, numXpdGain);
-
- if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
- REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset,
- SM(pdGainOverlap_t2,
- AR_PHY_TPCRG5_PD_GAIN_OVERLAP)
- | SM(gainBoundaries[0],
- AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1)
- | SM(gainBoundaries[1],
- AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2)
- | SM(gainBoundaries[2],
- AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3)
- | SM(gainBoundaries[3],
- AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
- }
-
- regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;
- for (j = 0; j < 32; j++) {
- reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) |
- ((pdadcValues[4 * j + 1] & 0xFF) << 8) |
- ((pdadcValues[4 * j + 2] & 0xFF) << 16)|
- ((pdadcValues[4 * j + 3] & 0xFF) << 24);
- REG_WRITE(ah, regOffset, reg32);
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "PDADC (%d,%4x): %4.4x %8.8x\n",
- i, regChainOffset, regOffset,
- reg32);
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "PDADC: Chain %d | "
- "PDADC %3d Value %3d | "
- "PDADC %3d Value %3d | "
- "PDADC %3d Value %3d | "
- "PDADC %3d Value %3d |\n",
- i, 4 * j, pdadcValues[4 * j],
- 4 * j + 1, pdadcValues[4 * j + 1],
- 4 * j + 2, pdadcValues[4 * j + 2],
- 4 * j + 3,
- pdadcValues[4 * j + 3]);
-
- regOffset += 4;
- }
- }
- }
-
- *pTxPowerIndexOffset = 0;
-}
-
-static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
- struct ath9k_channel *chan,
- int16_t *ratesArray,
- u16 cfgCtl,
- u16 AntennaReduction,
- u16 twiceMaxRegulatoryPower,
- u16 powerLimit)
-{
- struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
- u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
- static const u16 tpScaleReductionTable[5] =
- { 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
-
- int i;
- int16_t twiceLargestAntenna;
- struct cal_ctl_data_4k *rep;
- struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
- 0, { 0, 0, 0, 0}
- };
- struct cal_target_power_leg targetPowerOfdmExt = {
- 0, { 0, 0, 0, 0} }, targetPowerCckExt = {
- 0, { 0, 0, 0, 0 }
- };
- struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
- 0, {0, 0, 0, 0}
- };
- u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
- u16 ctlModesFor11g[] =
- { CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
- CTL_2GHT40
- };
- u16 numCtlModes, *pCtlMode, ctlMode, freq;
- struct chan_centers centers;
- int tx_chainmask;
- u16 twiceMinEdgePower;
-
- tx_chainmask = ah->txchainmask;
-
- ath9k_hw_get_channel_centers(ah, chan, ¢ers);
-
- twiceLargestAntenna = pEepData->modalHeader.antennaGainCh[0];
-
- twiceLargestAntenna = (int16_t)min(AntennaReduction -
- twiceLargestAntenna, 0);
-
- maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
-
- if (ah->regulatory.tp_scale != ATH9K_TP_SCALE_MAX) {
- maxRegAllowedPower -=
- (tpScaleReductionTable[(ah->regulatory.tp_scale)] * 2);
- }
-
- scaledPower = min(powerLimit, maxRegAllowedPower);
- scaledPower = max((u16)0, scaledPower);
-
- numCtlModes = ARRAY_SIZE(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40;
- pCtlMode = ctlModesFor11g;
-
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPowerCck,
- AR5416_NUM_2G_CCK_TARGET_POWERS,
- &targetPowerCck, 4, false);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPower2G,
- AR5416_NUM_2G_20_TARGET_POWERS,
- &targetPowerOfdm, 4, false);
- ath9k_hw_get_target_powers(ah, chan,
- pEepData->calTargetPower2GHT20,
- AR5416_NUM_2G_20_TARGET_POWERS,
- &targetPowerHt20, 8, false);
-
- if (IS_CHAN_HT40(chan)) {
- numCtlModes = ARRAY_SIZE(ctlModesFor11g);
- ath9k_hw_get_target_powers(ah, chan,
- pEepData->calTargetPower2GHT40,
- AR5416_NUM_2G_40_TARGET_POWERS,
- &targetPowerHt40, 8, true);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPowerCck,
- AR5416_NUM_2G_CCK_TARGET_POWERS,
- &targetPowerCckExt, 4, true);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPower2G,
- AR5416_NUM_2G_20_TARGET_POWERS,
- &targetPowerOfdmExt, 4, true);
- }
-
- for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
- bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
- (pCtlMode[ctlMode] == CTL_2GHT40);
- if (isHt40CtlMode)
- freq = centers.synth_center;
- else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
- freq = centers.ext_center;
- else
- freq = centers.ctl_center;
-
- if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
- ah->eep_ops->get_eeprom_rev(ah) <= 2)
- twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
- "EXT_ADDITIVE %d\n",
- ctlMode, numCtlModes, isHt40CtlMode,
- (pCtlMode[ctlMode] & EXT_ADDITIVE));
-
- for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
- pEepData->ctlIndex[i]; i++) {
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- " LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
- "pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
- "chan %d\n",
- i, cfgCtl, pCtlMode[ctlMode],
- pEepData->ctlIndex[i], chan->channel);
-
- if ((((cfgCtl & ~CTL_MODE_M) |
- (pCtlMode[ctlMode] & CTL_MODE_M)) ==
- pEepData->ctlIndex[i]) ||
- (((cfgCtl & ~CTL_MODE_M) |
- (pCtlMode[ctlMode] & CTL_MODE_M)) ==
- ((pEepData->ctlIndex[i] & CTL_MODE_M) |
- SD_NO_CTL))) {
- rep = &(pEepData->ctlData[i]);
-
- twiceMinEdgePower =
- ath9k_hw_get_max_edge_power(freq,
- rep->ctlEdges[ar5416_get_ntxchains
- (tx_chainmask) - 1],
- IS_CHAN_2GHZ(chan),
- AR5416_EEP4K_NUM_BAND_EDGES);
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- " MATCH-EE_IDX %d: ch %d is2 %d "
- "2xMinEdge %d chainmask %d chains %d\n",
- i, freq, IS_CHAN_2GHZ(chan),
- twiceMinEdgePower, tx_chainmask,
- ar5416_get_ntxchains
- (tx_chainmask));
- if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
- twiceMaxEdgePower =
- min(twiceMaxEdgePower,
- twiceMinEdgePower);
- } else {
- twiceMaxEdgePower = twiceMinEdgePower;
- break;
- }
- }
- }
-
- minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- " SEL-Min ctlMode %d pCtlMode %d "
- "2xMaxEdge %d sP %d minCtlPwr %d\n",
- ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
- scaledPower, minCtlPower);
-
- switch (pCtlMode[ctlMode]) {
- case CTL_11B:
- for (i = 0; i < ARRAY_SIZE(targetPowerCck.tPow2x);
- i++) {
- targetPowerCck.tPow2x[i] =
- min((u16)targetPowerCck.tPow2x[i],
- minCtlPower);
- }
- break;
- case CTL_11G:
- for (i = 0; i < ARRAY_SIZE(targetPowerOfdm.tPow2x);
- i++) {
- targetPowerOfdm.tPow2x[i] =
- min((u16)targetPowerOfdm.tPow2x[i],
- minCtlPower);
- }
- break;
- case CTL_2GHT20:
- for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x);
- i++) {
- targetPowerHt20.tPow2x[i] =
- min((u16)targetPowerHt20.tPow2x[i],
- minCtlPower);
- }
- break;
- case CTL_11B_EXT:
- targetPowerCckExt.tPow2x[0] = min((u16)
- targetPowerCckExt.tPow2x[0],
- minCtlPower);
- break;
- case CTL_11G_EXT:
- targetPowerOfdmExt.tPow2x[0] = min((u16)
- targetPowerOfdmExt.tPow2x[0],
- minCtlPower);
- break;
- case CTL_2GHT40:
- for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x);
- i++) {
- targetPowerHt40.tPow2x[i] =
- min((u16)targetPowerHt40.tPow2x[i],
- minCtlPower);
- }
- break;
- default:
- break;
- }
- }
-
- ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] =
- ratesArray[rate18mb] = ratesArray[rate24mb] =
- targetPowerOfdm.tPow2x[0];
- ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
- ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
- ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
- ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
-
- for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
- ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
-
- ratesArray[rate1l] = targetPowerCck.tPow2x[0];
- ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck.tPow2x[1];
- ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck.tPow2x[2];
- ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck.tPow2x[3];
-
- if (IS_CHAN_HT40(chan)) {
- for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
- ratesArray[rateHt40_0 + i] =
- targetPowerHt40.tPow2x[i];
- }
- ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
- ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
- ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
- ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0];
- }
-}
-
-static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u16 cfgCtl,
- u8 twiceAntennaReduction,
- u8 twiceMaxRegulatoryPower,
- u8 powerLimit)
-{
- struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
- struct modal_eep_4k_header *pModal = &pEepData->modalHeader;
- int16_t ratesArray[Ar5416RateSize];
- int16_t txPowerIndexOffset = 0;
- u8 ht40PowerIncForPdadc = 2;
- int i;
-
- memset(ratesArray, 0, sizeof(ratesArray));
-
- if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_2) {
- ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
- }
-
- ath9k_hw_set_4k_power_per_rate_table(ah, chan,
- &ratesArray[0], cfgCtl,
- twiceAntennaReduction,
- twiceMaxRegulatoryPower,
- powerLimit);
-
- ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset);
-
- for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
- ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]);
- if (ratesArray[i] > AR5416_MAX_RATE_POWER)
- ratesArray[i] = AR5416_MAX_RATE_POWER;
- }
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- for (i = 0; i < Ar5416RateSize; i++)
- ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
- }
-
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
- ATH9K_POW_SM(ratesArray[rate18mb], 24)
- | ATH9K_POW_SM(ratesArray[rate12mb], 16)
- | ATH9K_POW_SM(ratesArray[rate9mb], 8)
- | ATH9K_POW_SM(ratesArray[rate6mb], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
- ATH9K_POW_SM(ratesArray[rate54mb], 24)
- | ATH9K_POW_SM(ratesArray[rate48mb], 16)
- | ATH9K_POW_SM(ratesArray[rate36mb], 8)
- | ATH9K_POW_SM(ratesArray[rate24mb], 0));
-
- if (IS_CHAN_2GHZ(chan)) {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
- ATH9K_POW_SM(ratesArray[rate2s], 24)
- | ATH9K_POW_SM(ratesArray[rate2l], 16)
- | ATH9K_POW_SM(ratesArray[rateXr], 8)
- | ATH9K_POW_SM(ratesArray[rate1l], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
- ATH9K_POW_SM(ratesArray[rate11s], 24)
- | ATH9K_POW_SM(ratesArray[rate11l], 16)
- | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
- | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
- }
-
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
- ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
- | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
- | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
- | ATH9K_POW_SM(ratesArray[rateHt20_0], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
- ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
- | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
- | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
- | ATH9K_POW_SM(ratesArray[rateHt20_4], 0));
-
- if (IS_CHAN_HT40(chan)) {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
- ATH9K_POW_SM(ratesArray[rateHt40_3] +
- ht40PowerIncForPdadc, 24)
- | ATH9K_POW_SM(ratesArray[rateHt40_2] +
- ht40PowerIncForPdadc, 16)
- | ATH9K_POW_SM(ratesArray[rateHt40_1] +
- ht40PowerIncForPdadc, 8)
- | ATH9K_POW_SM(ratesArray[rateHt40_0] +
- ht40PowerIncForPdadc, 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
- ATH9K_POW_SM(ratesArray[rateHt40_7] +
- ht40PowerIncForPdadc, 24)
- | ATH9K_POW_SM(ratesArray[rateHt40_6] +
- ht40PowerIncForPdadc, 16)
- | ATH9K_POW_SM(ratesArray[rateHt40_5] +
- ht40PowerIncForPdadc, 8)
- | ATH9K_POW_SM(ratesArray[rateHt40_4] +
- ht40PowerIncForPdadc, 0));
-
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
- ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
- | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
- | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
- | ATH9K_POW_SM(ratesArray[rateDupCck], 0));
- }
-
- i = rate6mb;
-
- if (IS_CHAN_HT40(chan))
- i = rateHt40_0;
- else if (IS_CHAN_HT20(chan))
- i = rateHt20_0;
-
- if (AR_SREV_9280_10_OR_LATER(ah))
- ah->regulatory.max_power_level =
- ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
- else
- ah->regulatory.max_power_level = ratesArray[i];
-
-}
-
-static void ath9k_hw_4k_set_addac(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
- struct modal_eep_4k_header *pModal;
- struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
- u8 biaslevel;
-
- if (ah->hw_version.macVersion != AR_SREV_VERSION_9160)
- return;
-
- if (ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_MINOR_VER_7)
- return;
-
- pModal = &eep->modalHeader;
-
- if (pModal->xpaBiasLvl != 0xff) {
- biaslevel = pModal->xpaBiasLvl;
- INI_RA(&ah->iniAddac, 7, 1) =
- (INI_RA(&ah->iniAddac, 7, 1) & (~0x18)) | biaslevel << 3;
- }
-}
-
-static void ath9k_hw_4k_set_gain(struct ath_hw *ah,
- struct modal_eep_4k_header *pModal,
- struct ar5416_eeprom_4k *eep,
- u8 txRxAttenLocal, int regChainOffset)
-{
- REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
- pModal->antCtrlChain[0]);
-
- REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
- (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) &
- ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
- AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
- SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
- SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
-
- if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_3) {
- txRxAttenLocal = pModal->txRxAttenCh[0];
-
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[0]);
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]);
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
- pModal->xatten2Margin[0]);
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN2_DB, pModal->xatten2Db[0]);
- }
-
- REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset,
- AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
- REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset,
- AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
-
- if (AR_SREV_9285_11(ah))
- REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14));
-}
-
-static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
- struct modal_eep_4k_header *pModal;
- struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
- u8 txRxAttenLocal;
- u8 ob[5], db1[5], db2[5];
- u8 ant_div_control1, ant_div_control2;
- u32 regVal;
-
- pModal = &eep->modalHeader;
- txRxAttenLocal = 23;
-
- REG_WRITE(ah, AR_PHY_SWITCH_COM,
- ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
-
- /* Single chain for 4K EEPROM*/
- ath9k_hw_4k_set_gain(ah, pModal, eep, txRxAttenLocal, 0);
-
- /* Initialize Ant Diversity settings from EEPROM */
- if (pModal->version == 3) {
- ant_div_control1 = ((pModal->ob_234 >> 12) & 0xf);
- ant_div_control2 = ((pModal->db1_234 >> 12) & 0xf);
- regVal = REG_READ(ah, 0x99ac);
- regVal &= (~(0x7f000000));
- regVal |= ((ant_div_control1 & 0x1) << 24);
- regVal |= (((ant_div_control1 >> 1) & 0x1) << 29);
- regVal |= (((ant_div_control1 >> 2) & 0x1) << 30);
- regVal |= ((ant_div_control2 & 0x3) << 25);
- regVal |= (((ant_div_control2 >> 2) & 0x3) << 27);
- REG_WRITE(ah, 0x99ac, regVal);
- regVal = REG_READ(ah, 0x99ac);
- regVal = REG_READ(ah, 0xa208);
- regVal &= (~(0x1 << 13));
- regVal |= (((ant_div_control1 >> 3) & 0x1) << 13);
- REG_WRITE(ah, 0xa208, regVal);
- regVal = REG_READ(ah, 0xa208);
- }
-
- if (pModal->version >= 2) {
- ob[0] = (pModal->ob_01 & 0xf);
- ob[1] = (pModal->ob_01 >> 4) & 0xf;
- ob[2] = (pModal->ob_234 & 0xf);
- ob[3] = ((pModal->ob_234 >> 4) & 0xf);
- ob[4] = ((pModal->ob_234 >> 8) & 0xf);
-
- db1[0] = (pModal->db1_01 & 0xf);
- db1[1] = ((pModal->db1_01 >> 4) & 0xf);
- db1[2] = (pModal->db1_234 & 0xf);
- db1[3] = ((pModal->db1_234 >> 4) & 0xf);
- db1[4] = ((pModal->db1_234 >> 8) & 0xf);
-
- db2[0] = (pModal->db2_01 & 0xf);
- db2[1] = ((pModal->db2_01 >> 4) & 0xf);
- db2[2] = (pModal->db2_234 & 0xf);
- db2[3] = ((pModal->db2_234 >> 4) & 0xf);
- db2[4] = ((pModal->db2_234 >> 8) & 0xf);
-
- } else if (pModal->version == 1) {
- ob[0] = (pModal->ob_01 & 0xf);
- ob[1] = ob[2] = ob[3] = ob[4] = (pModal->ob_01 >> 4) & 0xf;
- db1[0] = (pModal->db1_01 & 0xf);
- db1[1] = db1[2] = db1[3] =
- db1[4] = ((pModal->db1_01 >> 4) & 0xf);
- db2[0] = (pModal->db2_01 & 0xf);
- db2[1] = db2[2] = db2[3] =
- db2[4] = ((pModal->db2_01 >> 4) & 0xf);
- } else {
- int i;
- for (i = 0; i < 5; i++) {
- ob[i] = pModal->ob_01;
- db1[i] = pModal->db1_01;
- db2[i] = pModal->db1_01;
- }
- }
-
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_OB_0, AR9285_AN_RF2G3_OB_0_S, ob[0]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_OB_1, AR9285_AN_RF2G3_OB_1_S, ob[1]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_OB_2, AR9285_AN_RF2G3_OB_2_S, ob[2]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_OB_3, AR9285_AN_RF2G3_OB_3_S, ob[3]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_OB_4, AR9285_AN_RF2G3_OB_4_S, ob[4]);
-
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_DB1_0, AR9285_AN_RF2G3_DB1_0_S, db1[0]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_DB1_1, AR9285_AN_RF2G3_DB1_1_S, db1[1]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G3,
- AR9285_AN_RF2G3_DB1_2, AR9285_AN_RF2G3_DB1_2_S, db1[2]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB1_3, AR9285_AN_RF2G4_DB1_3_S, db1[3]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB1_4, AR9285_AN_RF2G4_DB1_4_S, db1[4]);
-
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB2_0, AR9285_AN_RF2G4_DB2_0_S, db2[0]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB2_1, AR9285_AN_RF2G4_DB2_1_S, db2[1]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB2_2, AR9285_AN_RF2G4_DB2_2_S, db2[2]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB2_3, AR9285_AN_RF2G4_DB2_3_S, db2[3]);
- ath9k_hw_analog_shift_rmw(ah, AR9285_AN_RF2G4,
- AR9285_AN_RF2G4_DB2_4, AR9285_AN_RF2G4_DB2_4_S, db2[4]);
-
-
- if (AR_SREV_9285_11(ah))
- REG_WRITE(ah, AR9285_AN_TOP4, AR9285_AN_TOP4_DEFAULT);
-
- REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
- pModal->switchSettling);
- REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
- pModal->adcDesiredSize);
-
- REG_WRITE(ah, AR_PHY_RF_CTL4,
- SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) |
- SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) |
- SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) |
- SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON));
-
- REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
- pModal->txEndToRxOn);
- REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
- pModal->thresh62);
- REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62,
- pModal->thresh62);
-
- if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_2) {
- REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_DATA_START,
- pModal->txFrameToDataStart);
- REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_PA_ON,
- pModal->txFrameToPaOn);
- }
-
- if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_3) {
- if (IS_CHAN_HT40(chan))
- REG_RMW_FIELD(ah, AR_PHY_SETTLING,
- AR_PHY_SETTLING_SWITCH,
- pModal->swSettleHt40);
- }
-}
-
-static u16 ath9k_hw_4k_get_eeprom_antenna_cfg(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
- struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
- struct modal_eep_4k_header *pModal = &eep->modalHeader;
-
- return pModal->antCtrlCommon & 0xFFFF;
-}
-
-static u8 ath9k_hw_4k_get_num_ant_config(struct ath_hw *ah,
- enum ieee80211_band freq_band)
-{
- return 1;
-}
-
-static u16 ath9k_hw_4k_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
-{
-#define EEP_MAP4K_SPURCHAN \
- (ah->eeprom.map4k.modalHeader.spurChans[i].spurChan)
-
- u16 spur_val = AR_NO_SPUR;
-
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "Getting spur idx %d is2Ghz. %d val %x\n",
- i, is2GHz, ah->config.spurchans[i][is2GHz]);
-
- switch (ah->config.spurmode) {
- case SPUR_DISABLE:
- break;
- case SPUR_ENABLE_IOCTL:
- spur_val = ah->config.spurchans[i][is2GHz];
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "Getting spur val from new loc. %d\n", spur_val);
- break;
- case SPUR_ENABLE_EEPROM:
- spur_val = EEP_MAP4K_SPURCHAN;
- break;
- }
-
- return spur_val;
-
-#undef EEP_MAP4K_SPURCHAN
-}
-
-static struct eeprom_ops eep_4k_ops = {
- .check_eeprom = ath9k_hw_4k_check_eeprom,
- .get_eeprom = ath9k_hw_4k_get_eeprom,
- .fill_eeprom = ath9k_hw_4k_fill_eeprom,
- .get_eeprom_ver = ath9k_hw_4k_get_eeprom_ver,
- .get_eeprom_rev = ath9k_hw_4k_get_eeprom_rev,
- .get_num_ant_config = ath9k_hw_4k_get_num_ant_config,
- .get_eeprom_antenna_cfg = ath9k_hw_4k_get_eeprom_antenna_cfg,
- .set_board_values = ath9k_hw_4k_set_board_values,
- .set_addac = ath9k_hw_4k_set_addac,
- .set_txpower = ath9k_hw_4k_set_txpower,
- .get_spur_channel = ath9k_hw_4k_get_spur_channel
-};
-
-/************************************************/
-/* EEPROM Operations for non-4K (Default) cards */
-/************************************************/
-
-static int ath9k_hw_def_get_eeprom_ver(struct ath_hw *ah)
-{
- return ((ah->eeprom.def.baseEepHeader.version >> 12) & 0xF);
-}
-
-static int ath9k_hw_def_get_eeprom_rev(struct ath_hw *ah)
-{
- return ((ah->eeprom.def.baseEepHeader.version) & 0xFFF);
-}
-
-static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah)
-{
-#define SIZE_EEPROM_DEF (sizeof(struct ar5416_eeprom_def) / sizeof(u16))
- u16 *eep_data = (u16 *)&ah->eeprom.def;
- int addr, ar5416_eep_start_loc = 0x100;
-
- for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) {
- if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
- eep_data)) {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
- "Unable to read eeprom region\n");
- return false;
- }
- eep_data++;
- }
- return true;
-#undef SIZE_EEPROM_DEF
-}
-
-static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
-{
- struct ar5416_eeprom_def *eep =
- (struct ar5416_eeprom_def *) &ah->eeprom.def;
- u16 *eepdata, temp, magic, magic2;
- u32 sum = 0, el;
- bool need_swap = false;
- int i, addr, size;
-
- if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n");
- return false;
- }
-
- if (!ath9k_hw_use_flash(ah)) {
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "Read Magic = 0x%04X\n", magic);
-
- if (magic != AR5416_EEPROM_MAGIC) {
- magic2 = swab16(magic);
-
- if (magic2 == AR5416_EEPROM_MAGIC) {
- size = sizeof(struct ar5416_eeprom_def);
- need_swap = true;
- eepdata = (u16 *) (&ah->eeprom);
-
- for (addr = 0; addr < size / sizeof(u16); addr++) {
- temp = swab16(*eepdata);
- *eepdata = temp;
- eepdata++;
- }
- } else {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
- "Invalid EEPROM Magic. "
- "Endianness mismatch.\n");
- return -EINVAL;
- }
- }
- }
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
- need_swap ? "True" : "False");
-
- if (need_swap)
- el = swab16(ah->eeprom.def.baseEepHeader.length);
- else
- el = ah->eeprom.def.baseEepHeader.length;
-
- if (el > sizeof(struct ar5416_eeprom_def))
- el = sizeof(struct ar5416_eeprom_def) / sizeof(u16);
- else
- el = el / sizeof(u16);
-
- eepdata = (u16 *)(&ah->eeprom);
-
- for (i = 0; i < el; i++)
- sum ^= *eepdata++;
-
- if (need_swap) {
- u32 integer, j;
- u16 word;
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "EEPROM Endianness is not native.. Changing.\n");
-
- word = swab16(eep->baseEepHeader.length);
- eep->baseEepHeader.length = word;
-
- word = swab16(eep->baseEepHeader.checksum);
- eep->baseEepHeader.checksum = word;
-
- word = swab16(eep->baseEepHeader.version);
- eep->baseEepHeader.version = word;
-
- word = swab16(eep->baseEepHeader.regDmn[0]);
- eep->baseEepHeader.regDmn[0] = word;
-
- word = swab16(eep->baseEepHeader.regDmn[1]);
- eep->baseEepHeader.regDmn[1] = word;
-
- word = swab16(eep->baseEepHeader.rfSilent);
- eep->baseEepHeader.rfSilent = word;
-
- word = swab16(eep->baseEepHeader.blueToothOptions);
- eep->baseEepHeader.blueToothOptions = word;
-
- word = swab16(eep->baseEepHeader.deviceCap);
- eep->baseEepHeader.deviceCap = word;
-
- for (j = 0; j < ARRAY_SIZE(eep->modalHeader); j++) {
- struct modal_eep_header *pModal =
- &eep->modalHeader[j];
- integer = swab32(pModal->antCtrlCommon);
- pModal->antCtrlCommon = integer;
-
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
- integer = swab32(pModal->antCtrlChain[i]);
- pModal->antCtrlChain[i] = integer;
- }
-
- for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
- word = swab16(pModal->spurChans[i].spurChan);
- pModal->spurChans[i].spurChan = word;
- }
- }
- }
-
- if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
- ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
- DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
- "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
- sum, ah->eep_ops->get_eeprom_ver(ah));
- return -EINVAL;
- }
-
- return 0;
-}
-
-static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah,
- enum eeprom_param param)
-{
- struct ar5416_eeprom_def *eep = &ah->eeprom.def;
- struct modal_eep_header *pModal = eep->modalHeader;
- struct base_eep_header *pBase = &eep->baseEepHeader;
-
- switch (param) {
- case EEP_NFTHRESH_5:
- return pModal[0].noiseFloorThreshCh[0];
- case EEP_NFTHRESH_2:
- return pModal[1].noiseFloorThreshCh[0];
- case AR_EEPROM_MAC(0):
- return pBase->macAddr[0] << 8 | pBase->macAddr[1];
- case AR_EEPROM_MAC(1):
- return pBase->macAddr[2] << 8 | pBase->macAddr[3];
- case AR_EEPROM_MAC(2):
- return pBase->macAddr[4] << 8 | pBase->macAddr[5];
- case EEP_REG_0:
- return pBase->regDmn[0];
- case EEP_REG_1:
- return pBase->regDmn[1];
- case EEP_OP_CAP:
- return pBase->deviceCap;
- case EEP_OP_MODE:
- return pBase->opCapFlags;
- case EEP_RF_SILENT:
- return pBase->rfSilent;
- case EEP_OB_5:
- return pModal[0].ob;
- case EEP_DB_5:
- return pModal[0].db;
- case EEP_OB_2:
- return pModal[1].ob;
- case EEP_DB_2:
- return pModal[1].db;
- case EEP_MINOR_REV:
- return AR5416_VER_MASK;
- case EEP_TX_MASK:
- return pBase->txMask;
- case EEP_RX_MASK:
- return pBase->rxMask;
- case EEP_RXGAIN_TYPE:
- return pBase->rxGainType;
- case EEP_TXGAIN_TYPE:
- return pBase->txGainType;
- case EEP_OL_PWRCTRL:
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
- return pBase->openLoopPwrCntl ? true : false;
- else
- return false;
- case EEP_RC_CHAIN_MASK:
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
- return pBase->rcChainMask;
- else
- return 0;
- case EEP_DAC_HPWR_5G:
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_20)
- return pBase->dacHiPwrMode_5G;
- else
- return 0;
- case EEP_FRAC_N_5G:
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_22)
- return pBase->frac_n_5g;
- else
- return 0;
- default:
- return 0;
- }
-}
-
-static void ath9k_hw_def_set_gain(struct ath_hw *ah,
- struct modal_eep_header *pModal,
- struct ar5416_eeprom_def *eep,
- u8 txRxAttenLocal, int regChainOffset, int i)
-{
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
- txRxAttenLocal = pModal->txRxAttenCh[i];
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
- pModal->bswMargin[i]);
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN1_DB,
- pModal->bswAtten[i]);
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
- pModal->xatten2Margin[i]);
- REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- AR_PHY_GAIN_2GHZ_XATTEN2_DB,
- pModal->xatten2Db[i]);
- } else {
- REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
- ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
- | SM(pModal-> bswMargin[i],
- AR_PHY_GAIN_2GHZ_BSW_MARGIN));
- REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
- ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
- | SM(pModal->bswAtten[i],
- AR_PHY_GAIN_2GHZ_BSW_ATTEN));
- }
- }
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_RMW_FIELD(ah,
- AR_PHY_RXGAIN + regChainOffset,
- AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
- REG_RMW_FIELD(ah,
- AR_PHY_RXGAIN + regChainOffset,
- AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
- } else {
- REG_WRITE(ah,
- AR_PHY_RXGAIN + regChainOffset,
- (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) &
- ~AR_PHY_RXGAIN_TXRX_ATTEN)
- | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN));
- REG_WRITE(ah,
- AR_PHY_GAIN_2GHZ + regChainOffset,
- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
- ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
- SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
- }
-}
-
-static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
- struct modal_eep_header *pModal;
- struct ar5416_eeprom_def *eep = &ah->eeprom.def;
- int i, regChainOffset;
- u8 txRxAttenLocal;
-
- pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
- txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44;
-
- REG_WRITE(ah, AR_PHY_SWITCH_COM,
- ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
-
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
- if (AR_SREV_9280(ah)) {
- if (i >= 2)
- break;
- }
-
- if (AR_SREV_5416_20_OR_LATER(ah) &&
- (ah->rxchainmask == 5 || ah->txchainmask == 5) && (i != 0))
- regChainOffset = (i == 1) ? 0x2000 : 0x1000;
- else
- regChainOffset = i * 0x1000;
-
- REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
- pModal->antCtrlChain[i]);
-
- REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
- (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) &
- ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
- AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
- SM(pModal->iqCalICh[i],
- AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
- SM(pModal->iqCalQCh[i],
- AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
-
- if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah))
- ath9k_hw_def_set_gain(ah, pModal, eep, txRxAttenLocal,
- regChainOffset, i);
- }
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- if (IS_CHAN_2GHZ(chan)) {
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
- AR_AN_RF2G1_CH0_OB,
- AR_AN_RF2G1_CH0_OB_S,
- pModal->ob);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
- AR_AN_RF2G1_CH0_DB,
- AR_AN_RF2G1_CH0_DB_S,
- pModal->db);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
- AR_AN_RF2G1_CH1_OB,
- AR_AN_RF2G1_CH1_OB_S,
- pModal->ob_ch1);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
- AR_AN_RF2G1_CH1_DB,
- AR_AN_RF2G1_CH1_DB_S,
- pModal->db_ch1);
- } else {
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
- AR_AN_RF5G1_CH0_OB5,
- AR_AN_RF5G1_CH0_OB5_S,
- pModal->ob);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
- AR_AN_RF5G1_CH0_DB5,
- AR_AN_RF5G1_CH0_DB5_S,
- pModal->db);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
- AR_AN_RF5G1_CH1_OB5,
- AR_AN_RF5G1_CH1_OB5_S,
- pModal->ob_ch1);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
- AR_AN_RF5G1_CH1_DB5,
- AR_AN_RF5G1_CH1_DB5_S,
- pModal->db_ch1);
- }
- ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
- AR_AN_TOP2_XPABIAS_LVL,
- AR_AN_TOP2_XPABIAS_LVL_S,
- pModal->xpaBiasLvl);
- ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
- AR_AN_TOP2_LOCALBIAS,
- AR_AN_TOP2_LOCALBIAS_S,
- pModal->local_bias);
- REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
- pModal->force_xpaon);
- }
-
- REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
- pModal->switchSettling);
- REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
- pModal->adcDesiredSize);
-
- if (!AR_SREV_9280_10_OR_LATER(ah))
- REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
- AR_PHY_DESIRED_SZ_PGA,
- pModal->pgaDesiredSize);
-
- REG_WRITE(ah, AR_PHY_RF_CTL4,
- SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF)
- | SM(pModal->txEndToXpaOff,
- AR_PHY_RF_CTL4_TX_END_XPAB_OFF)
- | SM(pModal->txFrameToXpaOn,
- AR_PHY_RF_CTL4_FRAME_XPAA_ON)
- | SM(pModal->txFrameToXpaOn,
- AR_PHY_RF_CTL4_FRAME_XPAB_ON));
-
- REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
- pModal->txEndToRxOn);
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
- pModal->thresh62);
- REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0,
- AR_PHY_EXT_CCA0_THRESH62,
- pModal->thresh62);
- } else {
- REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62,
- pModal->thresh62);
- REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
- AR_PHY_EXT_CCA_THRESH62,
- pModal->thresh62);
- }
-
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_2) {
- REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
- AR_PHY_TX_END_DATA_START,
- pModal->txFrameToDataStart);
- REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_PA_ON,
- pModal->txFrameToPaOn);
- }
-
- if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
- if (IS_CHAN_HT40(chan))
- REG_RMW_FIELD(ah, AR_PHY_SETTLING,
- AR_PHY_SETTLING_SWITCH,
- pModal->swSettleHt40);
- }
-
- if (AR_SREV_9280_20_OR_LATER(ah) &&
- AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
- REG_RMW_FIELD(ah, AR_PHY_CCK_TX_CTRL,
- AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK,
- pModal->miscBits);
-
-
- if (AR_SREV_9280_20(ah) && AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_20) {
- if (IS_CHAN_2GHZ(chan))
- REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
- eep->baseEepHeader.dacLpMode);
- else if (eep->baseEepHeader.dacHiPwrMode_5G)
- REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, 0);
- else
- REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
- eep->baseEepHeader.dacLpMode);
-
- REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
- pModal->miscBits >> 2);
-
- REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL9,
- AR_PHY_TX_DESIRED_SCALE_CCK,
- eep->baseEepHeader.desiredScaleCCK);
- }
-}
-
-static void ath9k_hw_def_set_addac(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
-#define XPA_LVL_FREQ(cnt) (pModal->xpaBiasLvlFreq[cnt])
- struct modal_eep_header *pModal;
- struct ar5416_eeprom_def *eep = &ah->eeprom.def;
- u8 biaslevel;
-
- if (ah->hw_version.macVersion != AR_SREV_VERSION_9160)
- return;
-
- if (ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_MINOR_VER_7)
- return;
-
- pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
-
- if (pModal->xpaBiasLvl != 0xff) {
- biaslevel = pModal->xpaBiasLvl;
- } else {
- u16 resetFreqBin, freqBin, freqCount = 0;
- struct chan_centers centers;
-
- ath9k_hw_get_channel_centers(ah, chan, ¢ers);
-
- resetFreqBin = FREQ2FBIN(centers.synth_center,
- IS_CHAN_2GHZ(chan));
- freqBin = XPA_LVL_FREQ(0) & 0xff;
- biaslevel = (u8) (XPA_LVL_FREQ(0) >> 14);
-
- freqCount++;
-
- while (freqCount < 3) {
- if (XPA_LVL_FREQ(freqCount) == 0x0)
- break;
-
- freqBin = XPA_LVL_FREQ(freqCount) & 0xff;
- if (resetFreqBin >= freqBin)
- biaslevel = (u8)(XPA_LVL_FREQ(freqCount) >> 14);
- else
- break;
- freqCount++;
- }
- }
-
- if (IS_CHAN_2GHZ(chan)) {
- INI_RA(&ah->iniAddac, 7, 1) = (INI_RA(&ah->iniAddac,
- 7, 1) & (~0x18)) | biaslevel << 3;
- } else {
- INI_RA(&ah->iniAddac, 6, 1) = (INI_RA(&ah->iniAddac,
- 6, 1) & (~0xc0)) | biaslevel << 6;
- }
-#undef XPA_LVL_FREQ
-}
-
-static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah,
- struct ath9k_channel *chan,
- struct cal_data_per_freq *pRawDataSet,
- u8 *bChans, u16 availPiers,
- u16 tPdGainOverlap, int16_t *pMinCalPower,
- u16 *pPdGainBoundaries, u8 *pPDADCValues,
- u16 numXpdGains)
-{
- int i, j, k;
- int16_t ss;
- u16 idxL = 0, idxR = 0, numPiers;
- static u8 vpdTableL[AR5416_NUM_PD_GAINS]
- [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
- static u8 vpdTableR[AR5416_NUM_PD_GAINS]
- [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
- static u8 vpdTableI[AR5416_NUM_PD_GAINS]
- [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-
- u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
- u8 minPwrT4[AR5416_NUM_PD_GAINS];
- u8 maxPwrT4[AR5416_NUM_PD_GAINS];
- int16_t vpdStep;
- int16_t tmpVal;
- u16 sizeCurrVpdTable, maxIndex, tgtIndex;
- bool match;
- int16_t minDelta = 0;
- struct chan_centers centers;
-
- ath9k_hw_get_channel_centers(ah, chan, ¢ers);
-
- for (numPiers = 0; numPiers < availPiers; numPiers++) {
- if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
- break;
- }
-
- match = ath9k_hw_get_lower_upper_index((u8)FREQ2FBIN(centers.synth_center,
- IS_CHAN_2GHZ(chan)),
- bChans, numPiers, &idxL, &idxR);
-
- if (match) {
- for (i = 0; i < numXpdGains; i++) {
- minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
- maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
- ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
- pRawDataSet[idxL].pwrPdg[i],
- pRawDataSet[idxL].vpdPdg[i],
- AR5416_PD_GAIN_ICEPTS,
- vpdTableI[i]);
- }
- } else {
- for (i = 0; i < numXpdGains; i++) {
- pVpdL = pRawDataSet[idxL].vpdPdg[i];
- pPwrL = pRawDataSet[idxL].pwrPdg[i];
- pVpdR = pRawDataSet[idxR].vpdPdg[i];
- pPwrR = pRawDataSet[idxR].pwrPdg[i];
-
- minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
-
- maxPwrT4[i] =
- min(pPwrL[AR5416_PD_GAIN_ICEPTS - 1],
- pPwrR[AR5416_PD_GAIN_ICEPTS - 1]);
-
-
- ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
- pPwrL, pVpdL,
- AR5416_PD_GAIN_ICEPTS,
- vpdTableL[i]);
- ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
- pPwrR, pVpdR,
- AR5416_PD_GAIN_ICEPTS,
- vpdTableR[i]);
-
- for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
- vpdTableI[i][j] =
- (u8)(ath9k_hw_interpolate((u16)
- FREQ2FBIN(centers.
- synth_center,
- IS_CHAN_2GHZ
- (chan)),
- bChans[idxL], bChans[idxR],
- vpdTableL[i][j], vpdTableR[i][j]));
- }
- }
- }
-
- *pMinCalPower = (int16_t)(minPwrT4[0] / 2);
-
- k = 0;
-
- for (i = 0; i < numXpdGains; i++) {
- if (i == (numXpdGains - 1))
- pPdGainBoundaries[i] =
- (u16)(maxPwrT4[i] / 2);
- else
- pPdGainBoundaries[i] =
- (u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
-
- pPdGainBoundaries[i] =
- min((u16)AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);
-
- if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
- minDelta = pPdGainBoundaries[0] - 23;
- pPdGainBoundaries[0] = 23;
- } else {
- minDelta = 0;
- }
-
- if (i == 0) {
- if (AR_SREV_9280_10_OR_LATER(ah))
- ss = (int16_t)(0 - (minPwrT4[i] / 2));
- else
- ss = 0;
- } else {
- ss = (int16_t)((pPdGainBoundaries[i - 1] -
- (minPwrT4[i] / 2)) -
- tPdGainOverlap + 1 + minDelta);
- }
- vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
- vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
- while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
- tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
- pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
- ss++;
- }
-
- sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
- tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
- (minPwrT4[i] / 2));
- maxIndex = (tgtIndex < sizeCurrVpdTable) ?
- tgtIndex : sizeCurrVpdTable;
-
- while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
- pPDADCValues[k++] = vpdTableI[i][ss++];
- }
-
- vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
- vpdTableI[i][sizeCurrVpdTable - 2]);
- vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
- if (tgtIndex > maxIndex) {
- while ((ss <= tgtIndex) &&
- (k < (AR5416_NUM_PDADC_VALUES - 1))) {
- tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] +
- (ss - maxIndex + 1) * vpdStep));
- pPDADCValues[k++] = (u8)((tmpVal > 255) ?
- 255 : tmpVal);
- ss++;
- }
- }
- }
-
- while (i < AR5416_PD_GAINS_IN_MASK) {
- pPdGainBoundaries[i] = pPdGainBoundaries[i - 1];
- i++;
- }
-
- while (k < AR5416_NUM_PDADC_VALUES) {
- pPDADCValues[k] = pPDADCValues[k - 1];
- k++;
- }
-
- return;
-}
-
-static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
- struct ath9k_channel *chan,
- int16_t *pTxPowerIndexOffset)
-{
-#define SM_PD_GAIN(x) SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##x)
-#define SM_PDGAIN_B(x, y) \
- SM((gainBoundaries[x]), AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##y)
-
- struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
- struct cal_data_per_freq *pRawDataset;
- u8 *pCalBChans = NULL;
- u16 pdGainOverlap_t2;
- static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
- u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
- u16 numPiers, i, j;
- int16_t tMinCalPower;
- u16 numXpdGain, xpdMask;
- u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 };
- u32 reg32, regOffset, regChainOffset;
- int16_t modalIdx;
-
- modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
- xpdMask = pEepData->modalHeader[modalIdx].xpdGain;
-
- if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_2) {
- pdGainOverlap_t2 =
- pEepData->modalHeader[modalIdx].pdGainOverlap;
- } else {
- pdGainOverlap_t2 = (u16)(MS(REG_READ(ah, AR_PHY_TPCRG5),
- AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
- }
-
- if (IS_CHAN_2GHZ(chan)) {
- pCalBChans = pEepData->calFreqPier2G;
- numPiers = AR5416_NUM_2G_CAL_PIERS;
- } else {
- pCalBChans = pEepData->calFreqPier5G;
- numPiers = AR5416_NUM_5G_CAL_PIERS;
- }
-
- if (OLC_FOR_AR9280_20_LATER && IS_CHAN_2GHZ(chan)) {
- pRawDataset = pEepData->calPierData2G[0];
- ah->initPDADC = ((struct calDataPerFreqOpLoop *)
- pRawDataset)->vpdPdg[0][0];
- }
-
- numXpdGain = 0;
-
- for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
- if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
- if (numXpdGain >= AR5416_NUM_PD_GAINS)
- break;
- xpdGainValues[numXpdGain] =
- (u16)(AR5416_PD_GAINS_IN_MASK - i);
- numXpdGain++;
- }
- }
-
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
- (numXpdGain - 1) & 0x3);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
- xpdGainValues[0]);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
- xpdGainValues[1]);
- REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3,
- xpdGainValues[2]);
-
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
- if (AR_SREV_5416_20_OR_LATER(ah) &&
- (ah->rxchainmask == 5 || ah->txchainmask == 5) &&
- (i != 0)) {
- regChainOffset = (i == 1) ? 0x2000 : 0x1000;
- } else
- regChainOffset = i * 0x1000;
-
- if (pEepData->baseEepHeader.txMask & (1 << i)) {
- if (IS_CHAN_2GHZ(chan))
- pRawDataset = pEepData->calPierData2G[i];
- else
- pRawDataset = pEepData->calPierData5G[i];
-
-
- if (OLC_FOR_AR9280_20_LATER) {
- u8 pcdacIdx;
- u8 txPower;
-
- ath9k_get_txgain_index(ah, chan,
- (struct calDataPerFreqOpLoop *)pRawDataset,
- pCalBChans, numPiers, &txPower, &pcdacIdx);
- ath9k_olc_get_pdadcs(ah, pcdacIdx,
- txPower/2, pdadcValues);
- } else {
- ath9k_hw_get_def_gain_boundaries_pdadcs(ah,
- chan, pRawDataset,
- pCalBChans, numPiers,
- pdGainOverlap_t2,
- &tMinCalPower,
- gainBoundaries,
- pdadcValues,
- numXpdGain);
- }
-
- if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
- if (OLC_FOR_AR9280_20_LATER) {
- REG_WRITE(ah,
- AR_PHY_TPCRG5 + regChainOffset,
- SM(0x6,
- AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
- SM_PD_GAIN(1) | SM_PD_GAIN(2) |
- SM_PD_GAIN(3) | SM_PD_GAIN(4));
- } else {
- REG_WRITE(ah,
- AR_PHY_TPCRG5 + regChainOffset,
- SM(pdGainOverlap_t2,
- AR_PHY_TPCRG5_PD_GAIN_OVERLAP)|
- SM_PDGAIN_B(0, 1) |
- SM_PDGAIN_B(1, 2) |
- SM_PDGAIN_B(2, 3) |
- SM_PDGAIN_B(3, 4));
- }
- }
-
- regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;
- for (j = 0; j < 32; j++) {
- reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) |
- ((pdadcValues[4 * j + 1] & 0xFF) << 8) |
- ((pdadcValues[4 * j + 2] & 0xFF) << 16)|
- ((pdadcValues[4 * j + 3] & 0xFF) << 24);
- REG_WRITE(ah, regOffset, reg32);
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "PDADC (%d,%4x): %4.4x %8.8x\n",
- i, regChainOffset, regOffset,
- reg32);
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "PDADC: Chain %d | PDADC %3d "
- "Value %3d | PDADC %3d Value %3d | "
- "PDADC %3d Value %3d | PDADC %3d "
- "Value %3d |\n",
- i, 4 * j, pdadcValues[4 * j],
- 4 * j + 1, pdadcValues[4 * j + 1],
- 4 * j + 2, pdadcValues[4 * j + 2],
- 4 * j + 3,
- pdadcValues[4 * j + 3]);
-
- regOffset += 4;
- }
- }
- }
-
- *pTxPowerIndexOffset = 0;
-#undef SM_PD_GAIN
-#undef SM_PDGAIN_B
-}
-
-static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
- struct ath9k_channel *chan,
- int16_t *ratesArray,
- u16 cfgCtl,
- u16 AntennaReduction,
- u16 twiceMaxRegulatoryPower,
- u16 powerLimit)
-{
-#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */
-#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */
-
- struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
- u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
- static const u16 tpScaleReductionTable[5] =
- { 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
-
- int i;
- int16_t twiceLargestAntenna;
- struct cal_ctl_data *rep;
- struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
- 0, { 0, 0, 0, 0}
- };
- struct cal_target_power_leg targetPowerOfdmExt = {
- 0, { 0, 0, 0, 0} }, targetPowerCckExt = {
- 0, { 0, 0, 0, 0 }
- };
- struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
- 0, {0, 0, 0, 0}
- };
- u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
- u16 ctlModesFor11a[] =
- { CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 };
- u16 ctlModesFor11g[] =
- { CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
- CTL_2GHT40
- };
- u16 numCtlModes, *pCtlMode, ctlMode, freq;
- struct chan_centers centers;
- int tx_chainmask;
- u16 twiceMinEdgePower;
-
- tx_chainmask = ah->txchainmask;
-
- ath9k_hw_get_channel_centers(ah, chan, ¢ers);
-
- twiceLargestAntenna = max(
- pEepData->modalHeader
- [IS_CHAN_2GHZ(chan)].antennaGainCh[0],
- pEepData->modalHeader
- [IS_CHAN_2GHZ(chan)].antennaGainCh[1]);
-
- twiceLargestAntenna = max((u8)twiceLargestAntenna,
- pEepData->modalHeader
- [IS_CHAN_2GHZ(chan)].antennaGainCh[2]);
-
- twiceLargestAntenna = (int16_t)min(AntennaReduction -
- twiceLargestAntenna, 0);
-
- maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
-
- if (ah->regulatory.tp_scale != ATH9K_TP_SCALE_MAX) {
- maxRegAllowedPower -=
- (tpScaleReductionTable[(ah->regulatory.tp_scale)] * 2);
- }
-
- scaledPower = min(powerLimit, maxRegAllowedPower);
-
- switch (ar5416_get_ntxchains(tx_chainmask)) {
- case 1:
- break;
- case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
- break;
- case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
- break;
- }
-
- scaledPower = max((u16)0, scaledPower);
-
- if (IS_CHAN_2GHZ(chan)) {
- numCtlModes = ARRAY_SIZE(ctlModesFor11g) -
- SUB_NUM_CTL_MODES_AT_2G_40;
- pCtlMode = ctlModesFor11g;
-
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPowerCck,
- AR5416_NUM_2G_CCK_TARGET_POWERS,
- &targetPowerCck, 4, false);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPower2G,
- AR5416_NUM_2G_20_TARGET_POWERS,
- &targetPowerOfdm, 4, false);
- ath9k_hw_get_target_powers(ah, chan,
- pEepData->calTargetPower2GHT20,
- AR5416_NUM_2G_20_TARGET_POWERS,
- &targetPowerHt20, 8, false);
-
- if (IS_CHAN_HT40(chan)) {
- numCtlModes = ARRAY_SIZE(ctlModesFor11g);
- ath9k_hw_get_target_powers(ah, chan,
- pEepData->calTargetPower2GHT40,
- AR5416_NUM_2G_40_TARGET_POWERS,
- &targetPowerHt40, 8, true);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPowerCck,
- AR5416_NUM_2G_CCK_TARGET_POWERS,
- &targetPowerCckExt, 4, true);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPower2G,
- AR5416_NUM_2G_20_TARGET_POWERS,
- &targetPowerOfdmExt, 4, true);
- }
- } else {
- numCtlModes = ARRAY_SIZE(ctlModesFor11a) -
- SUB_NUM_CTL_MODES_AT_5G_40;
- pCtlMode = ctlModesFor11a;
-
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPower5G,
- AR5416_NUM_5G_20_TARGET_POWERS,
- &targetPowerOfdm, 4, false);
- ath9k_hw_get_target_powers(ah, chan,
- pEepData->calTargetPower5GHT20,
- AR5416_NUM_5G_20_TARGET_POWERS,
- &targetPowerHt20, 8, false);
-
- if (IS_CHAN_HT40(chan)) {
- numCtlModes = ARRAY_SIZE(ctlModesFor11a);
- ath9k_hw_get_target_powers(ah, chan,
- pEepData->calTargetPower5GHT40,
- AR5416_NUM_5G_40_TARGET_POWERS,
- &targetPowerHt40, 8, true);
- ath9k_hw_get_legacy_target_powers(ah, chan,
- pEepData->calTargetPower5G,
- AR5416_NUM_5G_20_TARGET_POWERS,
- &targetPowerOfdmExt, 4, true);
- }
- }
-
- for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
- bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
- (pCtlMode[ctlMode] == CTL_2GHT40);
- if (isHt40CtlMode)
- freq = centers.synth_center;
- else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
- freq = centers.ext_center;
- else
- freq = centers.ctl_center;
-
- if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
- ah->eep_ops->get_eeprom_rev(ah) <= 2)
- twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
- "EXT_ADDITIVE %d\n",
- ctlMode, numCtlModes, isHt40CtlMode,
- (pCtlMode[ctlMode] & EXT_ADDITIVE));
-
- for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- " LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
- "pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
- "chan %d\n",
- i, cfgCtl, pCtlMode[ctlMode],
- pEepData->ctlIndex[i], chan->channel);
-
- if ((((cfgCtl & ~CTL_MODE_M) |
- (pCtlMode[ctlMode] & CTL_MODE_M)) ==
- pEepData->ctlIndex[i]) ||
- (((cfgCtl & ~CTL_MODE_M) |
- (pCtlMode[ctlMode] & CTL_MODE_M)) ==
- ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) {
- rep = &(pEepData->ctlData[i]);
-
- twiceMinEdgePower = ath9k_hw_get_max_edge_power(freq,
- rep->ctlEdges[ar5416_get_ntxchains(tx_chainmask) - 1],
- IS_CHAN_2GHZ(chan), AR5416_NUM_BAND_EDGES);
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- " MATCH-EE_IDX %d: ch %d is2 %d "
- "2xMinEdge %d chainmask %d chains %d\n",
- i, freq, IS_CHAN_2GHZ(chan),
- twiceMinEdgePower, tx_chainmask,
- ar5416_get_ntxchains
- (tx_chainmask));
- if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
- twiceMaxEdgePower = min(twiceMaxEdgePower,
- twiceMinEdgePower);
- } else {
- twiceMaxEdgePower = twiceMinEdgePower;
- break;
- }
- }
- }
-
- minCtlPower = min(twiceMaxEdgePower, scaledPower);
-
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- " SEL-Min ctlMode %d pCtlMode %d "
- "2xMaxEdge %d sP %d minCtlPwr %d\n",
- ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
- scaledPower, minCtlPower);
-
- switch (pCtlMode[ctlMode]) {
- case CTL_11B:
- for (i = 0; i < ARRAY_SIZE(targetPowerCck.tPow2x); i++) {
- targetPowerCck.tPow2x[i] =
- min((u16)targetPowerCck.tPow2x[i],
- minCtlPower);
- }
- break;
- case CTL_11A:
- case CTL_11G:
- for (i = 0; i < ARRAY_SIZE(targetPowerOfdm.tPow2x); i++) {
- targetPowerOfdm.tPow2x[i] =
- min((u16)targetPowerOfdm.tPow2x[i],
- minCtlPower);
- }
- break;
- case CTL_5GHT20:
- case CTL_2GHT20:
- for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++) {
- targetPowerHt20.tPow2x[i] =
- min((u16)targetPowerHt20.tPow2x[i],
- minCtlPower);
- }
- break;
- case CTL_11B_EXT:
- targetPowerCckExt.tPow2x[0] = min((u16)
- targetPowerCckExt.tPow2x[0],
- minCtlPower);
- break;
- case CTL_11A_EXT:
- case CTL_11G_EXT:
- targetPowerOfdmExt.tPow2x[0] = min((u16)
- targetPowerOfdmExt.tPow2x[0],
- minCtlPower);
- break;
- case CTL_5GHT40:
- case CTL_2GHT40:
- for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
- targetPowerHt40.tPow2x[i] =
- min((u16)targetPowerHt40.tPow2x[i],
- minCtlPower);
- }
- break;
- default:
- break;
- }
- }
-
- ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] =
- ratesArray[rate18mb] = ratesArray[rate24mb] =
- targetPowerOfdm.tPow2x[0];
- ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
- ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
- ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
- ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
-
- for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
- ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
-
- if (IS_CHAN_2GHZ(chan)) {
- ratesArray[rate1l] = targetPowerCck.tPow2x[0];
- ratesArray[rate2s] = ratesArray[rate2l] =
- targetPowerCck.tPow2x[1];
- ratesArray[rate5_5s] = ratesArray[rate5_5l] =
- targetPowerCck.tPow2x[2];
- ;
- ratesArray[rate11s] = ratesArray[rate11l] =
- targetPowerCck.tPow2x[3];
- ;
- }
- if (IS_CHAN_HT40(chan)) {
- for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
- ratesArray[rateHt40_0 + i] =
- targetPowerHt40.tPow2x[i];
- }
- ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
- ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
- ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
- if (IS_CHAN_2GHZ(chan)) {
- ratesArray[rateExtCck] =
- targetPowerCckExt.tPow2x[0];
- }
- }
-}
-
-static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
- struct ath9k_channel *chan,
- u16 cfgCtl,
- u8 twiceAntennaReduction,
- u8 twiceMaxRegulatoryPower,
- u8 powerLimit)
-{
-#define RT_AR_DELTA(x) (ratesArray[x] - cck_ofdm_delta)
- struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
- struct modal_eep_header *pModal =
- &(pEepData->modalHeader[IS_CHAN_2GHZ(chan)]);
- int16_t ratesArray[Ar5416RateSize];
- int16_t txPowerIndexOffset = 0;
- u8 ht40PowerIncForPdadc = 2;
- int i, cck_ofdm_delta = 0;
-
- memset(ratesArray, 0, sizeof(ratesArray));
-
- if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
- AR5416_EEP_MINOR_VER_2) {
- ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
- }
-
- ath9k_hw_set_def_power_per_rate_table(ah, chan,
- &ratesArray[0], cfgCtl,
- twiceAntennaReduction,
- twiceMaxRegulatoryPower,
- powerLimit);
-
- ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset);
-
- for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
- ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]);
- if (ratesArray[i] > AR5416_MAX_RATE_POWER)
- ratesArray[i] = AR5416_MAX_RATE_POWER;
- }
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- for (i = 0; i < Ar5416RateSize; i++)
- ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
- }
-
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
- ATH9K_POW_SM(ratesArray[rate18mb], 24)
- | ATH9K_POW_SM(ratesArray[rate12mb], 16)
- | ATH9K_POW_SM(ratesArray[rate9mb], 8)
- | ATH9K_POW_SM(ratesArray[rate6mb], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
- ATH9K_POW_SM(ratesArray[rate54mb], 24)
- | ATH9K_POW_SM(ratesArray[rate48mb], 16)
- | ATH9K_POW_SM(ratesArray[rate36mb], 8)
- | ATH9K_POW_SM(ratesArray[rate24mb], 0));
-
- if (IS_CHAN_2GHZ(chan)) {
- if (OLC_FOR_AR9280_20_LATER) {
- cck_ofdm_delta = 2;
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
- ATH9K_POW_SM(RT_AR_DELTA(rate2s), 24)
- | ATH9K_POW_SM(RT_AR_DELTA(rate2l), 16)
- | ATH9K_POW_SM(ratesArray[rateXr], 8)
- | ATH9K_POW_SM(RT_AR_DELTA(rate1l), 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
- ATH9K_POW_SM(RT_AR_DELTA(rate11s), 24)
- | ATH9K_POW_SM(RT_AR_DELTA(rate11l), 16)
- | ATH9K_POW_SM(RT_AR_DELTA(rate5_5s), 8)
- | ATH9K_POW_SM(RT_AR_DELTA(rate5_5l), 0));
- } else {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
- ATH9K_POW_SM(ratesArray[rate2s], 24)
- | ATH9K_POW_SM(ratesArray[rate2l], 16)
- | ATH9K_POW_SM(ratesArray[rateXr], 8)
- | ATH9K_POW_SM(ratesArray[rate1l], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
- ATH9K_POW_SM(ratesArray[rate11s], 24)
- | ATH9K_POW_SM(ratesArray[rate11l], 16)
- | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
- | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
- }
- }
-
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
- ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
- | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
- | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
- | ATH9K_POW_SM(ratesArray[rateHt20_0], 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
- ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
- | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
- | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
- | ATH9K_POW_SM(ratesArray[rateHt20_4], 0));
-
- if (IS_CHAN_HT40(chan)) {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
- ATH9K_POW_SM(ratesArray[rateHt40_3] +
- ht40PowerIncForPdadc, 24)
- | ATH9K_POW_SM(ratesArray[rateHt40_2] +
- ht40PowerIncForPdadc, 16)
- | ATH9K_POW_SM(ratesArray[rateHt40_1] +
- ht40PowerIncForPdadc, 8)
- | ATH9K_POW_SM(ratesArray[rateHt40_0] +
- ht40PowerIncForPdadc, 0));
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
- ATH9K_POW_SM(ratesArray[rateHt40_7] +
- ht40PowerIncForPdadc, 24)
- | ATH9K_POW_SM(ratesArray[rateHt40_6] +
- ht40PowerIncForPdadc, 16)
- | ATH9K_POW_SM(ratesArray[rateHt40_5] +
- ht40PowerIncForPdadc, 8)
- | ATH9K_POW_SM(ratesArray[rateHt40_4] +
- ht40PowerIncForPdadc, 0));
- if (OLC_FOR_AR9280_20_LATER) {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
- ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
- | ATH9K_POW_SM(RT_AR_DELTA(rateExtCck), 16)
- | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
- | ATH9K_POW_SM(RT_AR_DELTA(rateDupCck), 0));
- } else {
- REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
- ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
- | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
- | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
- | ATH9K_POW_SM(ratesArray[rateDupCck], 0));
- }
- }
-
- REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
- ATH9K_POW_SM(pModal->pwrDecreaseFor3Chain, 6)
- | ATH9K_POW_SM(pModal->pwrDecreaseFor2Chain, 0));
-
- i = rate6mb;
-
- if (IS_CHAN_HT40(chan))
- i = rateHt40_0;
- else if (IS_CHAN_HT20(chan))
- i = rateHt20_0;
-
- if (AR_SREV_9280_10_OR_LATER(ah))
- ah->regulatory.max_power_level =
- ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
- else
- ah->regulatory.max_power_level = ratesArray[i];
-
- switch(ar5416_get_ntxchains(ah->txchainmask)) {
- case 1:
- break;
- case 2:
- ah->regulatory.max_power_level += INCREASE_MAXPOW_BY_TWO_CHAIN;
- break;
- case 3:
- ah->regulatory.max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
- break;
- default:
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
- "Invalid chainmask configuration\n");
- break;
- }
-}
-
-static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
- enum ieee80211_band freq_band)
-{
- struct ar5416_eeprom_def *eep = &ah->eeprom.def;
- struct modal_eep_header *pModal =
- &(eep->modalHeader[ATH9K_HAL_FREQ_BAND_2GHZ == freq_band]);
- struct base_eep_header *pBase = &eep->baseEepHeader;
- u8 num_ant_config;
-
- num_ant_config = 1;
-
- if (pBase->version >= 0x0E0D)
- if (pModal->useAnt1)
- num_ant_config += 1;
-
- return num_ant_config;
-}
-
-static u16 ath9k_hw_def_get_eeprom_antenna_cfg(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
- struct ar5416_eeprom_def *eep = &ah->eeprom.def;
- struct modal_eep_header *pModal =
- &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
-
- return pModal->antCtrlCommon & 0xFFFF;
-}
-
-static u16 ath9k_hw_def_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
-{
-#define EEP_DEF_SPURCHAN \
- (ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan)
-
- u16 spur_val = AR_NO_SPUR;
-
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "Getting spur idx %d is2Ghz. %d val %x\n",
- i, is2GHz, ah->config.spurchans[i][is2GHz]);
-
- switch (ah->config.spurmode) {
- case SPUR_DISABLE:
- break;
- case SPUR_ENABLE_IOCTL:
- spur_val = ah->config.spurchans[i][is2GHz];
- DPRINTF(ah->ah_sc, ATH_DBG_ANI,
- "Getting spur val from new loc. %d\n", spur_val);
- break;
- case SPUR_ENABLE_EEPROM:
- spur_val = EEP_DEF_SPURCHAN;
- break;
- }
-
- return spur_val;
-
-#undef EEP_DEF_SPURCHAN
-}
-
-static struct eeprom_ops eep_def_ops = {
- .check_eeprom = ath9k_hw_def_check_eeprom,
- .get_eeprom = ath9k_hw_def_get_eeprom,
- .fill_eeprom = ath9k_hw_def_fill_eeprom,
- .get_eeprom_ver = ath9k_hw_def_get_eeprom_ver,
- .get_eeprom_rev = ath9k_hw_def_get_eeprom_rev,
- .get_num_ant_config = ath9k_hw_def_get_num_ant_config,
- .get_eeprom_antenna_cfg = ath9k_hw_def_get_eeprom_antenna_cfg,
- .set_board_values = ath9k_hw_def_set_board_values,
- .set_addac = ath9k_hw_def_set_addac,
- .set_txpower = ath9k_hw_def_set_txpower,
- .get_spur_channel = ath9k_hw_def_get_spur_channel
-};
-
-int ath9k_hw_eeprom_attach(struct ath_hw *ah)
+int ath9k_hw_eeprom_init(struct ath_hw *ah)
{
int status;
- if (AR_SREV_9285(ah)) {
+ if (AR_SREV_9287(ah)) {
+ ah->eep_map = EEP_MAP_AR9287;
+ ah->eep_ops = &eep_AR9287_ops;
+ } else if (AR_SREV_9285(ah) || AR_SREV_9271(ah)) {
ah->eep_map = EEP_MAP_4KBITS;
ah->eep_ops = &eep_4k_ops;
} else {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 67b8bd12..4fe33f7 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -100,6 +100,8 @@
#define AR5416_VER_MASK (eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK)
#define OLC_FOR_AR9280_20_LATER (AR_SREV_9280_20_OR_LATER(ah) && \
ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+#define OLC_FOR_AR9287_10_LATER (AR_SREV_9287_10_OR_LATER(ah) && \
+ ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
#define AR_EEPROM_RFSILENT_GPIO_SEL 0x001c
#define AR_EEPROM_RFSILENT_GPIO_SEL_S 2
@@ -176,6 +178,57 @@
#define AR9280_TX_GAIN_TABLE_SIZE 22
+#define AR9287_EEP_VER 0xE
+#define AR9287_EEP_VER_MINOR_MASK 0xFFF
+#define AR9287_EEP_MINOR_VER_1 0x1
+#define AR9287_EEP_MINOR_VER_2 0x2
+#define AR9287_EEP_MINOR_VER_3 0x3
+#define AR9287_EEP_MINOR_VER AR9287_EEP_MINOR_VER_3
+#define AR9287_EEP_MINOR_VER_b AR9287_EEP_MINOR_VER
+#define AR9287_EEP_NO_BACK_VER AR9287_EEP_MINOR_VER_1
+
+#define AR9287_EEP_START_LOC 128
+#define AR9287_NUM_2G_CAL_PIERS 3
+#define AR9287_NUM_2G_CCK_TARGET_POWERS 3
+#define AR9287_NUM_2G_20_TARGET_POWERS 3
+#define AR9287_NUM_2G_40_TARGET_POWERS 3
+#define AR9287_NUM_CTLS 12
+#define AR9287_NUM_BAND_EDGES 4
+#define AR9287_NUM_PD_GAINS 4
+#define AR9287_PD_GAINS_IN_MASK 4
+#define AR9287_PD_GAIN_ICEPTS 1
+#define AR9287_EEPROM_MODAL_SPURS 5
+#define AR9287_MAX_RATE_POWER 63
+#define AR9287_NUM_PDADC_VALUES 128
+#define AR9287_NUM_RATES 16
+#define AR9287_BCHAN_UNUSED 0xFF
+#define AR9287_MAX_PWR_RANGE_IN_HALF_DB 64
+#define AR9287_OPFLAGS_11A 0x01
+#define AR9287_OPFLAGS_11G 0x02
+#define AR9287_OPFLAGS_2G_HT40 0x08
+#define AR9287_OPFLAGS_2G_HT20 0x20
+#define AR9287_OPFLAGS_5G_HT40 0x04
+#define AR9287_OPFLAGS_5G_HT20 0x10
+#define AR9287_EEPMISC_BIG_ENDIAN 0x01
+#define AR9287_EEPMISC_WOW 0x02
+#define AR9287_MAX_CHAINS 2
+#define AR9287_ANT_16S 32
+#define AR9287_custdatasize 20
+
+#define AR9287_NUM_ANT_CHAIN_FIELDS 6
+#define AR9287_NUM_ANT_COMMON_FIELDS 4
+#define AR9287_SIZE_ANT_CHAIN_FIELD 2
+#define AR9287_SIZE_ANT_COMMON_FIELD 4
+#define AR9287_ANT_CHAIN_MASK 0x3
+#define AR9287_ANT_COMMON_MASK 0xf
+#define AR9287_CHAIN_0_IDX 0
+#define AR9287_CHAIN_1_IDX 1
+#define AR9287_DATA_SZ 32
+
+#define AR9287_PWR_TABLE_OFFSET_DB -5
+
+#define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1)
+
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
@@ -199,7 +252,11 @@
EEP_OL_PWRCTRL,
EEP_RC_CHAIN_MASK,
EEP_DAC_HPWR_5G,
- EEP_FRAC_N_5G
+ EEP_FRAC_N_5G,
+ EEP_DEV_TYPE,
+ EEP_TEMPSENSE_SLOPE,
+ EEP_TEMPSENSE_SLOPE_PAL_ON,
+ EEP_PWR_TABLE_OFFSET
};
enum ar5416_rates {
@@ -328,46 +385,123 @@
} __packed;
struct modal_eep_4k_header {
- u32 antCtrlChain[AR5416_EEP4K_MAX_CHAINS];
- u32 antCtrlCommon;
- u8 antennaGainCh[AR5416_EEP4K_MAX_CHAINS];
- u8 switchSettling;
- u8 txRxAttenCh[AR5416_EEP4K_MAX_CHAINS];
- u8 rxTxMarginCh[AR5416_EEP4K_MAX_CHAINS];
- u8 adcDesiredSize;
- u8 pgaDesiredSize;
- u8 xlnaGainCh[AR5416_EEP4K_MAX_CHAINS];
- u8 txEndToXpaOff;
- u8 txEndToRxOn;
- u8 txFrameToXpaOn;
- u8 thresh62;
- u8 noiseFloorThreshCh[AR5416_EEP4K_MAX_CHAINS];
- u8 xpdGain;
- u8 xpd;
- u8 iqCalICh[AR5416_EEP4K_MAX_CHAINS];
- u8 iqCalQCh[AR5416_EEP4K_MAX_CHAINS];
- u8 pdGainOverlap;
- u8 ob_01;
- u8 db1_01;
- u8 xpaBiasLvl;
- u8 txFrameToDataStart;
- u8 txFrameToPaOn;
- u8 ht40PowerIncForPdadc;
- u8 bswAtten[AR5416_EEP4K_MAX_CHAINS];
- u8 bswMargin[AR5416_EEP4K_MAX_CHAINS];
- u8 swSettleHt40;
- u8 xatten2Db[AR5416_EEP4K_MAX_CHAINS];
- u8 xatten2Margin[AR5416_EEP4K_MAX_CHAINS];
- u8 db2_01;
- u8 version;
- u16 ob_234;
- u16 db1_234;
- u16 db2_234;
- u8 futureModal[4];
-
+ u32 antCtrlChain[AR5416_EEP4K_MAX_CHAINS];
+ u32 antCtrlCommon;
+ u8 antennaGainCh[AR5416_EEP4K_MAX_CHAINS];
+ u8 switchSettling;
+ u8 txRxAttenCh[AR5416_EEP4K_MAX_CHAINS];
+ u8 rxTxMarginCh[AR5416_EEP4K_MAX_CHAINS];
+ u8 adcDesiredSize;
+ u8 pgaDesiredSize;
+ u8 xlnaGainCh[AR5416_EEP4K_MAX_CHAINS];
+ u8 txEndToXpaOff;
+ u8 txEndToRxOn;
+ u8 txFrameToXpaOn;
+ u8 thresh62;
+ u8 noiseFloorThreshCh[AR5416_EEP4K_MAX_CHAINS];
+ u8 xpdGain;
+ u8 xpd;
+ u8 iqCalICh[AR5416_EEP4K_MAX_CHAINS];
+ u8 iqCalQCh[AR5416_EEP4K_MAX_CHAINS];
+ u8 pdGainOverlap;
+#ifdef __BIG_ENDIAN_BITFIELD
+ u8 ob_1:4, ob_0:4;
+ u8 db1_1:4, db1_0:4;
+#else
+ u8 ob_0:4, ob_1:4;
+ u8 db1_0:4, db1_1:4;
+#endif
+ u8 xpaBiasLvl;
+ u8 txFrameToDataStart;
+ u8 txFrameToPaOn;
+ u8 ht40PowerIncForPdadc;
+ u8 bswAtten[AR5416_EEP4K_MAX_CHAINS];
+ u8 bswMargin[AR5416_EEP4K_MAX_CHAINS];
+ u8 swSettleHt40;
+ u8 xatten2Db[AR5416_EEP4K_MAX_CHAINS];
+ u8 xatten2Margin[AR5416_EEP4K_MAX_CHAINS];
+#ifdef __BIG_ENDIAN_BITFIELD
+ u8 db2_1:4, db2_0:4;
+#else
+ u8 db2_0:4, db2_1:4;
+#endif
+ u8 version;
+#ifdef __BIG_ENDIAN_BITFIELD
+ u8 ob_3:4, ob_2:4;
+ u8 antdiv_ctl1:4, ob_4:4;
+ u8 db1_3:4, db1_2:4;
+ u8 antdiv_ctl2:4, db1_4:4;
+ u8 db2_2:4, db2_3:4;
+ u8 reserved:4, db2_4:4;
+#else
+ u8 ob_2:4, ob_3:4;
+ u8 ob_4:4, antdiv_ctl1:4;
+ u8 db1_2:4, db1_3:4;
+ u8 db1_4:4, antdiv_ctl2:4;
+ u8 db2_2:4, db2_3:4;
+ u8 db2_4:4, reserved:4;
+#endif
+ u8 futureModal[4];
struct spur_chan spurChans[AR5416_EEPROM_MODAL_SPURS];
} __packed;
+struct base_eep_ar9287_header {
+ u16 length;
+ u16 checksum;
+ u16 version;
+ u8 opCapFlags;
+ u8 eepMisc;
+ u16 regDmn[2];
+ u8 macAddr[6];
+ u8 rxMask;
+ u8 txMask;
+ u16 rfSilent;
+ u16 blueToothOptions;
+ u16 deviceCap;
+ u32 binBuildNumber;
+ u8 deviceType;
+ u8 openLoopPwrCntl;
+ int8_t pwrTableOffset;
+ int8_t tempSensSlope;
+ int8_t tempSensSlopePalOn;
+ u8 futureBase[29];
+} __packed;
+
+struct modal_eep_ar9287_header {
+ u32 antCtrlChain[AR9287_MAX_CHAINS];
+ u32 antCtrlCommon;
+ int8_t antennaGainCh[AR9287_MAX_CHAINS];
+ u8 switchSettling;
+ u8 txRxAttenCh[AR9287_MAX_CHAINS];
+ u8 rxTxMarginCh[AR9287_MAX_CHAINS];
+ int8_t adcDesiredSize;
+ u8 txEndToXpaOff;
+ u8 txEndToRxOn;
+ u8 txFrameToXpaOn;
+ u8 thresh62;
+ int8_t noiseFloorThreshCh[AR9287_MAX_CHAINS];
+ u8 xpdGain;
+ u8 xpd;
+ int8_t iqCalICh[AR9287_MAX_CHAINS];
+ int8_t iqCalQCh[AR9287_MAX_CHAINS];
+ u8 pdGainOverlap;
+ u8 xpaBiasLvl;
+ u8 txFrameToDataStart;
+ u8 txFrameToPaOn;
+ u8 ht40PowerIncForPdadc;
+ u8 bswAtten[AR9287_MAX_CHAINS];
+ u8 bswMargin[AR9287_MAX_CHAINS];
+ u8 swSettleHt40;
+ u8 version;
+ u8 db1;
+ u8 db2;
+ u8 ob_cck;
+ u8 ob_psk;
+ u8 ob_qam;
+ u8 ob_pal_off;
+ u8 futureModal[30];
+ struct spur_chan spurChans[AR9287_EEPROM_MODAL_SPURS];
+} __packed;
struct cal_data_per_freq {
u8 pwrPdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
@@ -402,6 +536,28 @@
} __packed;
#endif
+struct cal_data_op_loop_ar9287 {
+ u8 pwrPdg[2][5];
+ u8 vpdPdg[2][5];
+ u8 pcdac[2][5];
+ u8 empty[2][5];
+} __packed;
+
+struct cal_data_per_freq_ar9287 {
+ u8 pwrPdg[AR9287_NUM_PD_GAINS][AR9287_PD_GAIN_ICEPTS];
+ u8 vpdPdg[AR9287_NUM_PD_GAINS][AR9287_PD_GAIN_ICEPTS];
+} __packed;
+
+union cal_data_per_freq_ar9287_u {
+ struct cal_data_op_loop_ar9287 calDataOpen;
+ struct cal_data_per_freq_ar9287 calDataClose;
+} __packed;
+
+struct cal_ctl_data_ar9287 {
+ struct cal_ctl_edges
+ ctlEdges[AR9287_MAX_CHAINS][AR9287_NUM_BAND_EDGES];
+} __packed;
+
struct cal_ctl_data {
struct cal_ctl_edges
ctlEdges[AR5416_MAX_CHAINS][AR5416_NUM_BAND_EDGES];
@@ -461,6 +617,26 @@
u8 padding;
} __packed;
+struct ar9287_eeprom {
+ struct base_eep_ar9287_header baseEepHeader;
+ u8 custData[AR9287_DATA_SZ];
+ struct modal_eep_ar9287_header modalHeader;
+ u8 calFreqPier2G[AR9287_NUM_2G_CAL_PIERS];
+ union cal_data_per_freq_ar9287_u
+ calPierData2G[AR9287_MAX_CHAINS][AR9287_NUM_2G_CAL_PIERS];
+ struct cal_target_power_leg
+ calTargetPowerCck[AR9287_NUM_2G_CCK_TARGET_POWERS];
+ struct cal_target_power_leg
+ calTargetPower2G[AR9287_NUM_2G_20_TARGET_POWERS];
+ struct cal_target_power_ht
+ calTargetPower2GHT20[AR9287_NUM_2G_20_TARGET_POWERS];
+ struct cal_target_power_ht
+ calTargetPower2GHT40[AR9287_NUM_2G_40_TARGET_POWERS];
+ u8 ctlIndex[AR9287_NUM_CTLS];
+ struct cal_ctl_data_ar9287 ctlData[AR9287_NUM_CTLS];
+ u8 padding;
+} __packed;
+
enum reg_ext_bitmap {
REG_EXT_JAPAN_MIDBAND = 1,
REG_EXT_FCC_DFS_HT40 = 2,
@@ -480,6 +656,7 @@
enum ath9k_eep_map {
EEP_MAP_DEFAULT = 0x0,
EEP_MAP_4KBITS,
+ EEP_MAP_AR9287,
EEP_MAP_MAX
};
@@ -500,10 +677,39 @@
u16 (*get_spur_channel)(struct ath_hw *ah, u16 i, bool is2GHz);
};
+void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask,
+ u32 shift, u32 val);
+int16_t ath9k_hw_interpolate(u16 target, u16 srcLeft, u16 srcRight,
+ int16_t targetLeft,
+ int16_t targetRight);
+bool ath9k_hw_get_lower_upper_index(u8 target, u8 *pList, u16 listSize,
+ u16 *indexL, u16 *indexR);
+bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data);
+void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
+ u8 *pVpdList, u16 numIntercepts,
+ u8 *pRetVpdList);
+void ath9k_hw_get_legacy_target_powers(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_target_power_leg *powInfo,
+ u16 numChannels,
+ struct cal_target_power_leg *pNewPower,
+ u16 numRates, bool isExtTarget);
+void ath9k_hw_get_target_powers(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_target_power_ht *powInfo,
+ u16 numChannels,
+ struct cal_target_power_ht *pNewPower,
+ u16 numRates, bool isHt40Target);
+u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower,
+ bool is2GHz, int num_band_edges);
+int ath9k_hw_eeprom_init(struct ath_hw *ah);
+
#define ar5416_get_ntxchains(_txchainmask) \
(((_txchainmask >> 2) & 1) + \
((_txchainmask >> 1) & 1) + (_txchainmask & 1))
-int ath9k_hw_eeprom_attach(struct ath_hw *ah);
+extern const struct eeprom_ops eep_def_ops;
+extern const struct eeprom_ops eep_4k_ops;
+extern const struct eeprom_ops eep_AR9287_ops;
#endif /* EEPROM_H */
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
new file mode 100644
index 0000000..b8eca7b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -0,0 +1,1188 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static int ath9k_hw_4k_get_eeprom_ver(struct ath_hw *ah)
+{
+ return ((ah->eeprom.map4k.baseEepHeader.version >> 12) & 0xF);
+}
+
+static int ath9k_hw_4k_get_eeprom_rev(struct ath_hw *ah)
+{
+ return ((ah->eeprom.map4k.baseEepHeader.version) & 0xFFF);
+}
+
+static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
+{
+#define SIZE_EEPROM_4K (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
+ u16 *eep_data = (u16 *)&ah->eeprom.map4k;
+ int addr, eep_start_loc = 0;
+
+ eep_start_loc = 64;
+
+ if (!ath9k_hw_use_flash(ah)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Reading from EEPROM, not flash\n");
+ }
+
+ for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
+ if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Unable to read eeprom region \n");
+ return false;
+ }
+ eep_data++;
+ }
+
+ return true;
+#undef SIZE_EEPROM_4K
+}
+
+static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
+{
+#define EEPROM_4K_SIZE (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
+ struct ar5416_eeprom_4k *eep =
+ (struct ar5416_eeprom_4k *) &ah->eeprom.map4k;
+ u16 *eepdata, temp, magic, magic2;
+ u32 sum = 0, el;
+ bool need_swap = false;
+ int i, addr;
+
+
+ if (!ath9k_hw_use_flash(ah)) {
+ if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
+ &magic)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Reading Magic # failed\n");
+ return false;
+ }
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Read Magic = 0x%04X\n", magic);
+
+ if (magic != AR5416_EEPROM_MAGIC) {
+ magic2 = swab16(magic);
+
+ if (magic2 == AR5416_EEPROM_MAGIC) {
+ need_swap = true;
+ eepdata = (u16 *) (&ah->eeprom);
+
+ for (addr = 0; addr < EEPROM_4K_SIZE; addr++) {
+ temp = swab16(*eepdata);
+ *eepdata = temp;
+ eepdata++;
+ }
+ } else {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Invalid EEPROM Magic. "
+ "endianness mismatch.\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
+ need_swap ? "True" : "False");
+
+ if (need_swap)
+ el = swab16(ah->eeprom.map4k.baseEepHeader.length);
+ else
+ el = ah->eeprom.map4k.baseEepHeader.length;
+
+ if (el > sizeof(struct ar5416_eeprom_4k))
+ el = sizeof(struct ar5416_eeprom_4k) / sizeof(u16);
+ else
+ el = el / sizeof(u16);
+
+ eepdata = (u16 *)(&ah->eeprom);
+
+ for (i = 0; i < el; i++)
+ sum ^= *eepdata++;
+
+ if (need_swap) {
+ u32 integer;
+ u16 word;
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "EEPROM Endianness is not native.. Changing\n");
+
+ word = swab16(eep->baseEepHeader.length);
+ eep->baseEepHeader.length = word;
+
+ word = swab16(eep->baseEepHeader.checksum);
+ eep->baseEepHeader.checksum = word;
+
+ word = swab16(eep->baseEepHeader.version);
+ eep->baseEepHeader.version = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[0]);
+ eep->baseEepHeader.regDmn[0] = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[1]);
+ eep->baseEepHeader.regDmn[1] = word;
+
+ word = swab16(eep->baseEepHeader.rfSilent);
+ eep->baseEepHeader.rfSilent = word;
+
+ word = swab16(eep->baseEepHeader.blueToothOptions);
+ eep->baseEepHeader.blueToothOptions = word;
+
+ word = swab16(eep->baseEepHeader.deviceCap);
+ eep->baseEepHeader.deviceCap = word;
+
+ integer = swab32(eep->modalHeader.antCtrlCommon);
+ eep->modalHeader.antCtrlCommon = integer;
+
+ for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
+ integer = swab32(eep->modalHeader.antCtrlChain[i]);
+ eep->modalHeader.antCtrlChain[i] = integer;
+ }
+
+ for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
+ word = swab16(eep->modalHeader.spurChans[i].spurChan);
+ eep->modalHeader.spurChans[i].spurChan = word;
+ }
+ }
+
+ if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
+ ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+ sum, ah->eep_ops->get_eeprom_ver(ah));
+ return -EINVAL;
+ }
+
+ return 0;
+#undef EEPROM_4K_SIZE
+}
+
+static u32 ath9k_hw_4k_get_eeprom(struct ath_hw *ah,
+ enum eeprom_param param)
+{
+ struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
+ struct modal_eep_4k_header *pModal = &eep->modalHeader;
+ struct base_eep_header_4k *pBase = &eep->baseEepHeader;
+
+ switch (param) {
+ case EEP_NFTHRESH_2:
+ return pModal->noiseFloorThreshCh[0];
+ case AR_EEPROM_MAC(0):
+ return pBase->macAddr[0] << 8 | pBase->macAddr[1];
+ case AR_EEPROM_MAC(1):
+ return pBase->macAddr[2] << 8 | pBase->macAddr[3];
+ case AR_EEPROM_MAC(2):
+ return pBase->macAddr[4] << 8 | pBase->macAddr[5];
+ case EEP_REG_0:
+ return pBase->regDmn[0];
+ case EEP_REG_1:
+ return pBase->regDmn[1];
+ case EEP_OP_CAP:
+ return pBase->deviceCap;
+ case EEP_OP_MODE:
+ return pBase->opCapFlags;
+ case EEP_RF_SILENT:
+ return pBase->rfSilent;
+ case EEP_OB_2:
+ return pModal->ob_0;
+ case EEP_DB_2:
+ return pModal->db1_1;
+ case EEP_MINOR_REV:
+ return pBase->version & AR5416_EEP_VER_MINOR_MASK;
+ case EEP_TX_MASK:
+ return pBase->txMask;
+ case EEP_RX_MASK:
+ return pBase->rxMask;
+ case EEP_FRAC_N_5G:
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static void ath9k_hw_get_4k_gain_boundaries_pdadcs(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_data_per_freq_4k *pRawDataSet,
+ u8 *bChans, u16 availPiers,
+ u16 tPdGainOverlap, int16_t *pMinCalPower,
+ u16 *pPdGainBoundaries, u8 *pPDADCValues,
+ u16 numXpdGains)
+{
+#define TMP_VAL_VPD_TABLE \
+ ((vpdTableI[i][sizeCurrVpdTable - 1] + (ss - maxIndex + 1) * vpdStep));
+ int i, j, k;
+ int16_t ss;
+ u16 idxL = 0, idxR = 0, numPiers;
+ static u8 vpdTableL[AR5416_EEP4K_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+ static u8 vpdTableR[AR5416_EEP4K_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+ static u8 vpdTableI[AR5416_EEP4K_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+
+ u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
+ u8 minPwrT4[AR5416_EEP4K_NUM_PD_GAINS];
+ u8 maxPwrT4[AR5416_EEP4K_NUM_PD_GAINS];
+ int16_t vpdStep;
+ int16_t tmpVal;
+ u16 sizeCurrVpdTable, maxIndex, tgtIndex;
+ bool match;
+ int16_t minDelta = 0;
+ struct chan_centers centers;
+#define PD_GAIN_BOUNDARY_DEFAULT 58;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ for (numPiers = 0; numPiers < availPiers; numPiers++) {
+ if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
+ break;
+ }
+
+ match = ath9k_hw_get_lower_upper_index(
+ (u8)FREQ2FBIN(centers.synth_center,
+ IS_CHAN_2GHZ(chan)), bChans, numPiers,
+ &idxL, &idxR);
+
+ if (match) {
+ for (i = 0; i < numXpdGains; i++) {
+ minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
+ maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pRawDataSet[idxL].pwrPdg[i],
+ pRawDataSet[idxL].vpdPdg[i],
+ AR5416_EEP4K_PD_GAIN_ICEPTS,
+ vpdTableI[i]);
+ }
+ } else {
+ for (i = 0; i < numXpdGains; i++) {
+ pVpdL = pRawDataSet[idxL].vpdPdg[i];
+ pPwrL = pRawDataSet[idxL].pwrPdg[i];
+ pVpdR = pRawDataSet[idxR].vpdPdg[i];
+ pPwrR = pRawDataSet[idxR].pwrPdg[i];
+
+ minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
+
+ maxPwrT4[i] =
+ min(pPwrL[AR5416_EEP4K_PD_GAIN_ICEPTS - 1],
+ pPwrR[AR5416_EEP4K_PD_GAIN_ICEPTS - 1]);
+
+
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pPwrL, pVpdL,
+ AR5416_EEP4K_PD_GAIN_ICEPTS,
+ vpdTableL[i]);
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pPwrR, pVpdR,
+ AR5416_EEP4K_PD_GAIN_ICEPTS,
+ vpdTableR[i]);
+
+ for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
+ vpdTableI[i][j] =
+ (u8)(ath9k_hw_interpolate((u16)
+ FREQ2FBIN(centers.
+ synth_center,
+ IS_CHAN_2GHZ
+ (chan)),
+ bChans[idxL], bChans[idxR],
+ vpdTableL[i][j], vpdTableR[i][j]));
+ }
+ }
+ }
+
+ *pMinCalPower = (int16_t)(minPwrT4[0] / 2);
+
+ k = 0;
+
+ for (i = 0; i < numXpdGains; i++) {
+ if (i == (numXpdGains - 1))
+ pPdGainBoundaries[i] =
+ (u16)(maxPwrT4[i] / 2);
+ else
+ pPdGainBoundaries[i] =
+ (u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
+
+ pPdGainBoundaries[i] =
+ min((u16)AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);
+
+ if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
+ minDelta = pPdGainBoundaries[0] - 23;
+ pPdGainBoundaries[0] = 23;
+ } else {
+ minDelta = 0;
+ }
+
+ if (i == 0) {
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ ss = (int16_t)(0 - (minPwrT4[i] / 2));
+ else
+ ss = 0;
+ } else {
+ ss = (int16_t)((pPdGainBoundaries[i - 1] -
+ (minPwrT4[i] / 2)) -
+ tPdGainOverlap + 1 + minDelta);
+ }
+ vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
+ vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+
+ while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+ tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
+ pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
+ ss++;
+ }
+
+ sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
+ tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
+ (minPwrT4[i] / 2));
+ maxIndex = (tgtIndex < sizeCurrVpdTable) ?
+ tgtIndex : sizeCurrVpdTable;
+
+ while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1)))
+ pPDADCValues[k++] = vpdTableI[i][ss++];
+
+ vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
+ vpdTableI[i][sizeCurrVpdTable - 2]);
+ vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+
+ if (tgtIndex >= maxIndex) {
+ while ((ss <= tgtIndex) &&
+ (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+ tmpVal = (int16_t) TMP_VAL_VPD_TABLE;
+ pPDADCValues[k++] = (u8)((tmpVal > 255) ?
+ 255 : tmpVal);
+ ss++;
+ }
+ }
+ }
+
+ while (i < AR5416_EEP4K_PD_GAINS_IN_MASK) {
+ pPdGainBoundaries[i] = PD_GAIN_BOUNDARY_DEFAULT;
+ i++;
+ }
+
+ while (k < AR5416_NUM_PDADC_VALUES) {
+ pPDADCValues[k] = pPDADCValues[k - 1];
+ k++;
+ }
+
+ return;
+#undef TMP_VAL_VPD_TABLE
+}
+
+static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ int16_t *pTxPowerIndexOffset)
+{
+ struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
+ struct cal_data_per_freq_4k *pRawDataset;
+ u8 *pCalBChans = NULL;
+ u16 pdGainOverlap_t2;
+ static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
+ u16 gainBoundaries[AR5416_EEP4K_PD_GAINS_IN_MASK];
+ u16 numPiers, i, j;
+ int16_t tMinCalPower;
+ u16 numXpdGain, xpdMask;
+ u16 xpdGainValues[AR5416_EEP4K_NUM_PD_GAINS] = { 0, 0 };
+ u32 reg32, regOffset, regChainOffset;
+
+ xpdMask = pEepData->modalHeader.xpdGain;
+
+ if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_2) {
+ pdGainOverlap_t2 =
+ pEepData->modalHeader.pdGainOverlap;
+ } else {
+ pdGainOverlap_t2 = (u16)(MS(REG_READ(ah, AR_PHY_TPCRG5),
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
+ }
+
+ pCalBChans = pEepData->calFreqPier2G;
+ numPiers = AR5416_EEP4K_NUM_2G_CAL_PIERS;
+
+ numXpdGain = 0;
+
+ for (i = 1; i <= AR5416_EEP4K_PD_GAINS_IN_MASK; i++) {
+ if ((xpdMask >> (AR5416_EEP4K_PD_GAINS_IN_MASK - i)) & 1) {
+ if (numXpdGain >= AR5416_EEP4K_NUM_PD_GAINS)
+ break;
+ xpdGainValues[numXpdGain] =
+ (u16)(AR5416_EEP4K_PD_GAINS_IN_MASK - i);
+ numXpdGain++;
+ }
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
+ (numXpdGain - 1) & 0x3);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
+ xpdGainValues[0]);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
+ xpdGainValues[1]);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, 0);
+
+ for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
+ if (AR_SREV_5416_20_OR_LATER(ah) &&
+ (ah->rxchainmask == 5 || ah->txchainmask == 5) &&
+ (i != 0)) {
+ regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+ } else
+ regChainOffset = i * 0x1000;
+
+ if (pEepData->baseEepHeader.txMask & (1 << i)) {
+ pRawDataset = pEepData->calPierData2G[i];
+
+ ath9k_hw_get_4k_gain_boundaries_pdadcs(ah, chan,
+ pRawDataset, pCalBChans,
+ numPiers, pdGainOverlap_t2,
+ &tMinCalPower, gainBoundaries,
+ pdadcValues, numXpdGain);
+
+ if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
+ REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset,
+ SM(pdGainOverlap_t2,
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP)
+ | SM(gainBoundaries[0],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1)
+ | SM(gainBoundaries[1],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2)
+ | SM(gainBoundaries[2],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3)
+ | SM(gainBoundaries[3],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
+ }
+
+ regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;
+ for (j = 0; j < 32; j++) {
+ reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) |
+ ((pdadcValues[4 * j + 1] & 0xFF) << 8) |
+ ((pdadcValues[4 * j + 2] & 0xFF) << 16)|
+ ((pdadcValues[4 * j + 3] & 0xFF) << 24);
+ REG_WRITE(ah, regOffset, reg32);
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "PDADC (%d,%4x): %4.4x %8.8x\n",
+ i, regChainOffset, regOffset,
+ reg32);
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "PDADC: Chain %d | "
+ "PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d |\n",
+ i, 4 * j, pdadcValues[4 * j],
+ 4 * j + 1, pdadcValues[4 * j + 1],
+ 4 * j + 2, pdadcValues[4 * j + 2],
+ 4 * j + 3,
+ pdadcValues[4 * j + 3]);
+
+ regOffset += 4;
+ }
+ }
+ }
+
+ *pTxPowerIndexOffset = 0;
+}
+
+static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ int16_t *ratesArray,
+ u16 cfgCtl,
+ u16 AntennaReduction,
+ u16 twiceMaxRegulatoryPower,
+ u16 powerLimit)
+{
+#define CMP_TEST_GRP \
+ (((cfgCtl & ~CTL_MODE_M)| (pCtlMode[ctlMode] & CTL_MODE_M)) == \
+ pEepData->ctlIndex[i]) \
+ || (((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == \
+ ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))
+
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ int i;
+ int16_t twiceLargestAntenna;
+ u16 twiceMinEdgePower;
+ u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+ u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+ u16 numCtlModes, *pCtlMode, ctlMode, freq;
+ struct chan_centers centers;
+ struct cal_ctl_data_4k *rep;
+ struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
+ static const u16 tpScaleReductionTable[5] =
+ { 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+ struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
+ 0, { 0, 0, 0, 0}
+ };
+ struct cal_target_power_leg targetPowerOfdmExt = {
+ 0, { 0, 0, 0, 0} }, targetPowerCckExt = {
+ 0, { 0, 0, 0, 0 }
+ };
+ struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
+ 0, {0, 0, 0, 0}
+ };
+ u16 ctlModesFor11g[] =
+ { CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
+ CTL_2GHT40
+ };
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ twiceLargestAntenna = pEepData->modalHeader.antennaGainCh[0];
+ twiceLargestAntenna = (int16_t)min(AntennaReduction -
+ twiceLargestAntenna, 0);
+
+ maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+ if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX) {
+ maxRegAllowedPower -=
+ (tpScaleReductionTable[(regulatory->tp_scale)] * 2);
+ }
+
+ scaledPower = min(powerLimit, maxRegAllowedPower);
+ scaledPower = max((u16)0, scaledPower);
+
+ numCtlModes = ARRAY_SIZE(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40;
+ pCtlMode = ctlModesFor11g;
+
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPowerCck,
+ AR5416_NUM_2G_CCK_TARGET_POWERS,
+ &targetPowerCck, 4, false);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower2G,
+ AR5416_NUM_2G_20_TARGET_POWERS,
+ &targetPowerOfdm, 4, false);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower2GHT20,
+ AR5416_NUM_2G_20_TARGET_POWERS,
+ &targetPowerHt20, 8, false);
+
+ if (IS_CHAN_HT40(chan)) {
+ numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower2GHT40,
+ AR5416_NUM_2G_40_TARGET_POWERS,
+ &targetPowerHt40, 8, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPowerCck,
+ AR5416_NUM_2G_CCK_TARGET_POWERS,
+ &targetPowerCckExt, 4, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower2G,
+ AR5416_NUM_2G_20_TARGET_POWERS,
+ &targetPowerOfdmExt, 4, true);
+ }
+
+ for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+ bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
+ (pCtlMode[ctlMode] == CTL_2GHT40);
+
+ if (isHt40CtlMode)
+ freq = centers.synth_center;
+ else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+ freq = centers.ext_center;
+ else
+ freq = centers.ctl_center;
+
+ if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
+ ah->eep_ops->get_eeprom_rev(ah) <= 2)
+ twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+
+ for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
+ pEepData->ctlIndex[i]; i++) {
+
+ if (CMP_TEST_GRP) {
+ rep = &(pEepData->ctlData[i]);
+
+ twiceMinEdgePower = ath9k_hw_get_max_edge_power(
+ freq,
+ rep->ctlEdges[
+ ar5416_get_ntxchains(ah->txchainmask) - 1],
+ IS_CHAN_2GHZ(chan),
+ AR5416_EEP4K_NUM_BAND_EDGES);
+
+ if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
+ twiceMaxEdgePower =
+ min(twiceMaxEdgePower,
+ twiceMinEdgePower);
+ } else {
+ twiceMaxEdgePower = twiceMinEdgePower;
+ break;
+ }
+ }
+ }
+
+ minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
+
+ switch (pCtlMode[ctlMode]) {
+ case CTL_11B:
+ for (i = 0; i < ARRAY_SIZE(targetPowerCck.tPow2x); i++) {
+ targetPowerCck.tPow2x[i] =
+ min((u16)targetPowerCck.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_11G:
+ for (i = 0; i < ARRAY_SIZE(targetPowerOfdm.tPow2x); i++) {
+ targetPowerOfdm.tPow2x[i] =
+ min((u16)targetPowerOfdm.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_2GHT20:
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++) {
+ targetPowerHt20.tPow2x[i] =
+ min((u16)targetPowerHt20.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_11B_EXT:
+ targetPowerCckExt.tPow2x[0] =
+ min((u16)targetPowerCckExt.tPow2x[0],
+ minCtlPower);
+ break;
+ case CTL_11G_EXT:
+ targetPowerOfdmExt.tPow2x[0] =
+ min((u16)targetPowerOfdmExt.tPow2x[0],
+ minCtlPower);
+ break;
+ case CTL_2GHT40:
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
+ targetPowerHt40.tPow2x[i] =
+ min((u16)targetPowerHt40.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ ratesArray[rate6mb] =
+ ratesArray[rate9mb] =
+ ratesArray[rate12mb] =
+ ratesArray[rate18mb] =
+ ratesArray[rate24mb] =
+ targetPowerOfdm.tPow2x[0];
+
+ ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
+ ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
+ ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
+ ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
+
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
+ ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
+
+ ratesArray[rate1l] = targetPowerCck.tPow2x[0];
+ ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck.tPow2x[1];
+ ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck.tPow2x[2];
+ ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck.tPow2x[3];
+
+ if (IS_CHAN_HT40(chan)) {
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
+ ratesArray[rateHt40_0 + i] =
+ targetPowerHt40.tPow2x[i];
+ }
+ ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
+ ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
+ ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
+ ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0];
+ }
+
+#undef CMP_TEST_GRP
+}
+
+static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ u16 cfgCtl,
+ u8 twiceAntennaReduction,
+ u8 twiceMaxRegulatoryPower,
+ u8 powerLimit)
+{
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
+ struct modal_eep_4k_header *pModal = &pEepData->modalHeader;
+ int16_t ratesArray[Ar5416RateSize];
+ int16_t txPowerIndexOffset = 0;
+ u8 ht40PowerIncForPdadc = 2;
+ int i;
+
+ memset(ratesArray, 0, sizeof(ratesArray));
+
+ if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_2) {
+ ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
+ }
+
+ ath9k_hw_set_4k_power_per_rate_table(ah, chan,
+ &ratesArray[0], cfgCtl,
+ twiceAntennaReduction,
+ twiceMaxRegulatoryPower,
+ powerLimit);
+
+ ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset);
+
+ for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
+ ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]);
+ if (ratesArray[i] > AR5416_MAX_RATE_POWER)
+ ratesArray[i] = AR5416_MAX_RATE_POWER;
+ }
+
+
+ /* Update regulatory */
+
+ i = rate6mb;
+ if (IS_CHAN_HT40(chan))
+ i = rateHt40_0;
+ else if (IS_CHAN_HT20(chan))
+ i = rateHt20_0;
+
+ regulatory->max_power_level = ratesArray[i];
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ for (i = 0; i < Ar5416RateSize; i++)
+ ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+ }
+
+ /* OFDM power per rate */
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
+ ATH9K_POW_SM(ratesArray[rate18mb], 24)
+ | ATH9K_POW_SM(ratesArray[rate12mb], 16)
+ | ATH9K_POW_SM(ratesArray[rate9mb], 8)
+ | ATH9K_POW_SM(ratesArray[rate6mb], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
+ ATH9K_POW_SM(ratesArray[rate54mb], 24)
+ | ATH9K_POW_SM(ratesArray[rate48mb], 16)
+ | ATH9K_POW_SM(ratesArray[rate36mb], 8)
+ | ATH9K_POW_SM(ratesArray[rate24mb], 0));
+
+ /* CCK power per rate */
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+ ATH9K_POW_SM(ratesArray[rate2s], 24)
+ | ATH9K_POW_SM(ratesArray[rate2l], 16)
+ | ATH9K_POW_SM(ratesArray[rateXr], 8)
+ | ATH9K_POW_SM(ratesArray[rate1l], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+ ATH9K_POW_SM(ratesArray[rate11s], 24)
+ | ATH9K_POW_SM(ratesArray[rate11l], 16)
+ | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
+ | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
+
+ /* HT20 power per rate */
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
+ ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt20_0], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
+ ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt20_4], 0));
+
+ /* HT40 power per rate */
+ if (IS_CHAN_HT40(chan)) {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
+ ATH9K_POW_SM(ratesArray[rateHt40_3] +
+ ht40PowerIncForPdadc, 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_2] +
+ ht40PowerIncForPdadc, 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_1] +
+ ht40PowerIncForPdadc, 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_0] +
+ ht40PowerIncForPdadc, 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
+ ATH9K_POW_SM(ratesArray[rateHt40_7] +
+ ht40PowerIncForPdadc, 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_6] +
+ ht40PowerIncForPdadc, 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_5] +
+ ht40PowerIncForPdadc, 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_4] +
+ ht40PowerIncForPdadc, 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
+ ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
+ | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
+ | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
+ | ATH9K_POW_SM(ratesArray[rateDupCck], 0));
+ }
+}
+
+static void ath9k_hw_4k_set_addac(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct modal_eep_4k_header *pModal;
+ struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
+ u8 biaslevel;
+
+ if (ah->hw_version.macVersion != AR_SREV_VERSION_9160)
+ return;
+
+ if (ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_MINOR_VER_7)
+ return;
+
+ pModal = &eep->modalHeader;
+
+ if (pModal->xpaBiasLvl != 0xff) {
+ biaslevel = pModal->xpaBiasLvl;
+ INI_RA(&ah->iniAddac, 7, 1) =
+ (INI_RA(&ah->iniAddac, 7, 1) & (~0x18)) | biaslevel << 3;
+ }
+}
+
+static void ath9k_hw_4k_set_gain(struct ath_hw *ah,
+ struct modal_eep_4k_header *pModal,
+ struct ar5416_eeprom_4k *eep,
+ u8 txRxAttenLocal)
+{
+ REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0,
+ pModal->antCtrlChain[0]);
+
+ REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0),
+ (REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
+ ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
+ SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
+ SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
+
+ if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_3) {
+ txRxAttenLocal = pModal->txRxAttenCh[0];
+
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ,
+ AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[0]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ,
+ AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ,
+ AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+ pModal->xatten2Margin[0]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ,
+ AR_PHY_GAIN_2GHZ_XATTEN2_DB, pModal->xatten2Db[0]);
+
+ /* Set the block 1 value to block 0 value */
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + 0x1000,
+ AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
+ pModal->bswMargin[0]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + 0x1000,
+ AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + 0x1000,
+ AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+ pModal->xatten2Margin[0]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + 0x1000,
+ AR_PHY_GAIN_2GHZ_XATTEN2_DB,
+ pModal->xatten2Db[0]);
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_RXGAIN,
+ AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
+ REG_RMW_FIELD(ah, AR_PHY_RXGAIN,
+ AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
+
+ REG_RMW_FIELD(ah, AR_PHY_RXGAIN + 0x1000,
+ AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
+ REG_RMW_FIELD(ah, AR_PHY_RXGAIN + 0x1000,
+ AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]);
+
+ if (AR_SREV_9285_11(ah))
+ REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14));
+}
+
+/*
+ * Read EEPROM header info and program the device for correct operation
+ * given the channel value.
+ */
+static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct modal_eep_4k_header *pModal;
+ struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
+ u8 txRxAttenLocal;
+ u8 ob[5], db1[5], db2[5];
+ u8 ant_div_control1, ant_div_control2;
+ u32 regVal;
+
+ pModal = &eep->modalHeader;
+ txRxAttenLocal = 23;
+
+ REG_WRITE(ah, AR_PHY_SWITCH_COM,
+ ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+
+ /* Single chain for 4K EEPROM*/
+ ath9k_hw_4k_set_gain(ah, pModal, eep, txRxAttenLocal);
+
+ /* Initialize Ant Diversity settings from EEPROM */
+ if (pModal->version >= 3) {
+ ant_div_control1 = pModal->antdiv_ctl1;
+ ant_div_control2 = pModal->antdiv_ctl2;
+
+ regVal = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
+ regVal &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL));
+
+ regVal |= SM(ant_div_control1,
+ AR_PHY_9285_ANT_DIV_CTL);
+ regVal |= SM(ant_div_control2,
+ AR_PHY_9285_ANT_DIV_ALT_LNACONF);
+ regVal |= SM((ant_div_control2 >> 2),
+ AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
+ regVal |= SM((ant_div_control1 >> 1),
+ AR_PHY_9285_ANT_DIV_ALT_GAINTB);
+ regVal |= SM((ant_div_control1 >> 2),
+ AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
+
+
+ REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regVal);
+ regVal = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
+ regVal = REG_READ(ah, AR_PHY_CCK_DETECT);
+ regVal &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
+ regVal |= SM((ant_div_control1 >> 3),
+ AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
+
+ REG_WRITE(ah, AR_PHY_CCK_DETECT, regVal);
+ regVal = REG_READ(ah, AR_PHY_CCK_DETECT);
+ }
+
+ if (pModal->version >= 2) {
+ ob[0] = pModal->ob_0;
+ ob[1] = pModal->ob_1;
+ ob[2] = pModal->ob_2;
+ ob[3] = pModal->ob_3;
+ ob[4] = pModal->ob_4;
+
+ db1[0] = pModal->db1_0;
+ db1[1] = pModal->db1_1;
+ db1[2] = pModal->db1_2;
+ db1[3] = pModal->db1_3;
+ db1[4] = pModal->db1_4;
+
+ db2[0] = pModal->db2_0;
+ db2[1] = pModal->db2_1;
+ db2[2] = pModal->db2_2;
+ db2[3] = pModal->db2_3;
+ db2[4] = pModal->db2_4;
+ } else if (pModal->version == 1) {
+ ob[0] = pModal->ob_0;
+ ob[1] = ob[2] = ob[3] = ob[4] = pModal->ob_1;
+ db1[0] = pModal->db1_0;
+ db1[1] = db1[2] = db1[3] = db1[4] = pModal->db1_1;
+ db2[0] = pModal->db2_0;
+ db2[1] = db2[2] = db2[3] = db2[4] = pModal->db2_1;
+ } else {
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ ob[i] = pModal->ob_0;
+ db1[i] = pModal->db1_0;
+ db2[i] = pModal->db1_0;
+ }
+ }
+
+ if (AR_SREV_9271(ah)) {
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9271_AN_RF2G3_OB_cck,
+ AR9271_AN_RF2G3_OB_cck_S,
+ ob[0]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9271_AN_RF2G3_OB_psk,
+ AR9271_AN_RF2G3_OB_psk_S,
+ ob[1]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9271_AN_RF2G3_OB_qam,
+ AR9271_AN_RF2G3_OB_qam_S,
+ ob[2]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9271_AN_RF2G3_DB_1,
+ AR9271_AN_RF2G3_DB_1_S,
+ db1[0]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9271_AN_RF2G4_DB_2,
+ AR9271_AN_RF2G4_DB_2_S,
+ db2[0]);
+ } else {
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_OB_0,
+ AR9285_AN_RF2G3_OB_0_S,
+ ob[0]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_OB_1,
+ AR9285_AN_RF2G3_OB_1_S,
+ ob[1]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_OB_2,
+ AR9285_AN_RF2G3_OB_2_S,
+ ob[2]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_OB_3,
+ AR9285_AN_RF2G3_OB_3_S,
+ ob[3]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_OB_4,
+ AR9285_AN_RF2G3_OB_4_S,
+ ob[4]);
+
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_DB1_0,
+ AR9285_AN_RF2G3_DB1_0_S,
+ db1[0]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_DB1_1,
+ AR9285_AN_RF2G3_DB1_1_S,
+ db1[1]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G3,
+ AR9285_AN_RF2G3_DB1_2,
+ AR9285_AN_RF2G3_DB1_2_S,
+ db1[2]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB1_3,
+ AR9285_AN_RF2G4_DB1_3_S,
+ db1[3]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB1_4,
+ AR9285_AN_RF2G4_DB1_4_S, db1[4]);
+
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB2_0,
+ AR9285_AN_RF2G4_DB2_0_S,
+ db2[0]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB2_1,
+ AR9285_AN_RF2G4_DB2_1_S,
+ db2[1]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB2_2,
+ AR9285_AN_RF2G4_DB2_2_S,
+ db2[2]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB2_3,
+ AR9285_AN_RF2G4_DB2_3_S,
+ db2[3]);
+ ath9k_hw_analog_shift_rmw(ah,
+ AR9285_AN_RF2G4,
+ AR9285_AN_RF2G4_DB2_4,
+ AR9285_AN_RF2G4_DB2_4_S,
+ db2[4]);
+ }
+
+
+ if (AR_SREV_9285_11(ah))
+ REG_WRITE(ah, AR9285_AN_TOP4, AR9285_AN_TOP4_DEFAULT);
+
+ REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
+ pModal->switchSettling);
+ REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
+ pModal->adcDesiredSize);
+
+ REG_WRITE(ah, AR_PHY_RF_CTL4,
+ SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) |
+ SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) |
+ SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) |
+ SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON));
+
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
+ pModal->txEndToRxOn);
+ REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
+ pModal->thresh62);
+ REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62,
+ pModal->thresh62);
+
+ if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_2) {
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_DATA_START,
+ pModal->txFrameToDataStart);
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_PA_ON,
+ pModal->txFrameToPaOn);
+ }
+
+ if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_3) {
+ if (IS_CHAN_HT40(chan))
+ REG_RMW_FIELD(ah, AR_PHY_SETTLING,
+ AR_PHY_SETTLING_SWITCH,
+ pModal->swSettleHt40);
+ }
+}
+
+static u16 ath9k_hw_4k_get_eeprom_antenna_cfg(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
+ struct modal_eep_4k_header *pModal = &eep->modalHeader;
+
+ return pModal->antCtrlCommon & 0xFFFF;
+}
+
+static u8 ath9k_hw_4k_get_num_ant_config(struct ath_hw *ah,
+ enum ieee80211_band freq_band)
+{
+ return 1;
+}
+
+static u16 ath9k_hw_4k_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
+{
+#define EEP_MAP4K_SPURCHAN \
+ (ah->eeprom.map4k.modalHeader.spurChans[i].spurChan)
+
+ u16 spur_val = AR_NO_SPUR;
+
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Getting spur idx %d is2Ghz. %d val %x\n",
+ i, is2GHz, ah->config.spurchans[i][is2GHz]);
+
+ switch (ah->config.spurmode) {
+ case SPUR_DISABLE:
+ break;
+ case SPUR_ENABLE_IOCTL:
+ spur_val = ah->config.spurchans[i][is2GHz];
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Getting spur val from new loc. %d\n", spur_val);
+ break;
+ case SPUR_ENABLE_EEPROM:
+ spur_val = EEP_MAP4K_SPURCHAN;
+ break;
+ }
+
+ return spur_val;
+
+#undef EEP_MAP4K_SPURCHAN
+}
+
+const struct eeprom_ops eep_4k_ops = {
+ .check_eeprom = ath9k_hw_4k_check_eeprom,
+ .get_eeprom = ath9k_hw_4k_get_eeprom,
+ .fill_eeprom = ath9k_hw_4k_fill_eeprom,
+ .get_eeprom_ver = ath9k_hw_4k_get_eeprom_ver,
+ .get_eeprom_rev = ath9k_hw_4k_get_eeprom_rev,
+ .get_num_ant_config = ath9k_hw_4k_get_num_ant_config,
+ .get_eeprom_antenna_cfg = ath9k_hw_4k_get_eeprom_antenna_cfg,
+ .set_board_values = ath9k_hw_4k_set_board_values,
+ .set_addac = ath9k_hw_4k_set_addac,
+ .set_txpower = ath9k_hw_4k_set_txpower,
+ .get_spur_channel = ath9k_hw_4k_get_spur_channel
+};
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
new file mode 100644
index 0000000..c20c21a
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -0,0 +1,1177 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static int ath9k_hw_AR9287_get_eeprom_ver(struct ath_hw *ah)
+{
+ return (ah->eeprom.map9287.baseEepHeader.version >> 12) & 0xF;
+}
+
+static int ath9k_hw_AR9287_get_eeprom_rev(struct ath_hw *ah)
+{
+ return (ah->eeprom.map9287.baseEepHeader.version) & 0xFFF;
+}
+
+static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
+{
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+ u16 *eep_data;
+ int addr, eep_start_loc = AR9287_EEP_START_LOC;
+ eep_data = (u16 *)eep;
+
+ if (!ath9k_hw_use_flash(ah)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Reading from EEPROM, not flash\n");
+ }
+
+ for (addr = 0; addr < sizeof(struct ar9287_eeprom) / sizeof(u16);
+ addr++) {
+ if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Unable to read eeprom region \n");
+ return false;
+ }
+ eep_data++;
+ }
+ return true;
+}
+
+static int ath9k_hw_AR9287_check_eeprom(struct ath_hw *ah)
+{
+ u32 sum = 0, el, integer;
+ u16 temp, word, magic, magic2, *eepdata;
+ int i, addr;
+ bool need_swap = false;
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+
+ if (!ath9k_hw_use_flash(ah)) {
+ if (!ath9k_hw_nvram_read
+ (ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Reading Magic # failed\n");
+ return false;
+ }
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Read Magic = 0x%04X\n", magic);
+ if (magic != AR5416_EEPROM_MAGIC) {
+ magic2 = swab16(magic);
+
+ if (magic2 == AR5416_EEPROM_MAGIC) {
+ need_swap = true;
+ eepdata = (u16 *)(&ah->eeprom);
+
+ for (addr = 0;
+ addr < sizeof(struct ar9287_eeprom) / sizeof(u16);
+ addr++) {
+ temp = swab16(*eepdata);
+ *eepdata = temp;
+ eepdata++;
+ }
+ } else {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Invalid EEPROM Magic. "
+ "endianness mismatch.\n");
+ return -EINVAL;
+ }
+ }
+ }
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n", need_swap ?
+ "True" : "False");
+
+ if (need_swap)
+ el = swab16(ah->eeprom.map9287.baseEepHeader.length);
+ else
+ el = ah->eeprom.map9287.baseEepHeader.length;
+
+ if (el > sizeof(struct ar9287_eeprom))
+ el = sizeof(struct ar9287_eeprom) / sizeof(u16);
+ else
+ el = el / sizeof(u16);
+
+ eepdata = (u16 *)(&ah->eeprom);
+ for (i = 0; i < el; i++)
+ sum ^= *eepdata++;
+
+ if (need_swap) {
+ word = swab16(eep->baseEepHeader.length);
+ eep->baseEepHeader.length = word;
+
+ word = swab16(eep->baseEepHeader.checksum);
+ eep->baseEepHeader.checksum = word;
+
+ word = swab16(eep->baseEepHeader.version);
+ eep->baseEepHeader.version = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[0]);
+ eep->baseEepHeader.regDmn[0] = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[1]);
+ eep->baseEepHeader.regDmn[1] = word;
+
+ word = swab16(eep->baseEepHeader.rfSilent);
+ eep->baseEepHeader.rfSilent = word;
+
+ word = swab16(eep->baseEepHeader.blueToothOptions);
+ eep->baseEepHeader.blueToothOptions = word;
+
+ word = swab16(eep->baseEepHeader.deviceCap);
+ eep->baseEepHeader.deviceCap = word;
+
+ integer = swab32(eep->modalHeader.antCtrlCommon);
+ eep->modalHeader.antCtrlCommon = integer;
+
+ for (i = 0; i < AR9287_MAX_CHAINS; i++) {
+ integer = swab32(eep->modalHeader.antCtrlChain[i]);
+ eep->modalHeader.antCtrlChain[i] = integer;
+ }
+
+ for (i = 0; i < AR9287_EEPROM_MODAL_SPURS; i++) {
+ word = swab16(eep->modalHeader.spurChans[i].spurChan);
+ eep->modalHeader.spurChans[i].spurChan = word;
+ }
+ }
+
+ if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR9287_EEP_VER
+ || ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+ sum, ah->eep_ops->get_eeprom_ver(ah));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static u32 ath9k_hw_AR9287_get_eeprom(struct ath_hw *ah,
+ enum eeprom_param param)
+{
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+ struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
+ struct base_eep_ar9287_header *pBase = &eep->baseEepHeader;
+ u16 ver_minor;
+
+ ver_minor = pBase->version & AR9287_EEP_VER_MINOR_MASK;
+ switch (param) {
+ case EEP_NFTHRESH_2:
+ return pModal->noiseFloorThreshCh[0];
+ case AR_EEPROM_MAC(0):
+ return pBase->macAddr[0] << 8 | pBase->macAddr[1];
+ case AR_EEPROM_MAC(1):
+ return pBase->macAddr[2] << 8 | pBase->macAddr[3];
+ case AR_EEPROM_MAC(2):
+ return pBase->macAddr[4] << 8 | pBase->macAddr[5];
+ case EEP_REG_0:
+ return pBase->regDmn[0];
+ case EEP_REG_1:
+ return pBase->regDmn[1];
+ case EEP_OP_CAP:
+ return pBase->deviceCap;
+ case EEP_OP_MODE:
+ return pBase->opCapFlags;
+ case EEP_RF_SILENT:
+ return pBase->rfSilent;
+ case EEP_MINOR_REV:
+ return ver_minor;
+ case EEP_TX_MASK:
+ return pBase->txMask;
+ case EEP_RX_MASK:
+ return pBase->rxMask;
+ case EEP_DEV_TYPE:
+ return pBase->deviceType;
+ case EEP_OL_PWRCTRL:
+ return pBase->openLoopPwrCntl;
+ case EEP_TEMPSENSE_SLOPE:
+ if (ver_minor >= AR9287_EEP_MINOR_VER_2)
+ return pBase->tempSensSlope;
+ else
+ return 0;
+ case EEP_TEMPSENSE_SLOPE_PAL_ON:
+ if (ver_minor >= AR9287_EEP_MINOR_VER_3)
+ return pBase->tempSensSlopePalOn;
+ else
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+
+static void ath9k_hw_get_AR9287_gain_boundaries_pdadcs(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_data_per_freq_ar9287 *pRawDataSet,
+ u8 *bChans, u16 availPiers,
+ u16 tPdGainOverlap, int16_t *pMinCalPower,
+ u16 *pPdGainBoundaries, u8 *pPDADCValues,
+ u16 numXpdGains)
+{
+#define TMP_VAL_VPD_TABLE \
+ ((vpdTableI[i][sizeCurrVpdTable - 1] + (ss - maxIndex + 1) * vpdStep));
+
+ int i, j, k;
+ int16_t ss;
+ u16 idxL = 0, idxR = 0, numPiers;
+ u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
+ u8 minPwrT4[AR9287_NUM_PD_GAINS];
+ u8 maxPwrT4[AR9287_NUM_PD_GAINS];
+ int16_t vpdStep;
+ int16_t tmpVal;
+ u16 sizeCurrVpdTable, maxIndex, tgtIndex;
+ bool match;
+ int16_t minDelta = 0;
+ struct chan_centers centers;
+ static u8 vpdTableL[AR5416_EEP4K_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+ static u8 vpdTableR[AR5416_EEP4K_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+ static u8 vpdTableI[AR5416_EEP4K_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ for (numPiers = 0; numPiers < availPiers; numPiers++) {
+ if (bChans[numPiers] == AR9287_BCHAN_UNUSED)
+ break;
+ }
+
+ match = ath9k_hw_get_lower_upper_index(
+ (u8)FREQ2FBIN(centers.synth_center,
+ IS_CHAN_2GHZ(chan)), bChans, numPiers,
+ &idxL, &idxR);
+
+ if (match) {
+ for (i = 0; i < numXpdGains; i++) {
+ minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
+ maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pRawDataSet[idxL].pwrPdg[i],
+ pRawDataSet[idxL].vpdPdg[i],
+ AR9287_PD_GAIN_ICEPTS, vpdTableI[i]);
+ }
+ } else {
+ for (i = 0; i < numXpdGains; i++) {
+ pVpdL = pRawDataSet[idxL].vpdPdg[i];
+ pPwrL = pRawDataSet[idxL].pwrPdg[i];
+ pVpdR = pRawDataSet[idxR].vpdPdg[i];
+ pPwrR = pRawDataSet[idxR].pwrPdg[i];
+
+ minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
+
+ maxPwrT4[i] =
+ min(pPwrL[AR9287_PD_GAIN_ICEPTS - 1],
+ pPwrR[AR9287_PD_GAIN_ICEPTS - 1]);
+
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pPwrL, pVpdL,
+ AR9287_PD_GAIN_ICEPTS,
+ vpdTableL[i]);
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pPwrR, pVpdR,
+ AR9287_PD_GAIN_ICEPTS,
+ vpdTableR[i]);
+
+ for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
+ vpdTableI[i][j] =
+ (u8)(ath9k_hw_interpolate((u16)
+ FREQ2FBIN(centers. synth_center,
+ IS_CHAN_2GHZ(chan)),
+ bChans[idxL], bChans[idxR],
+ vpdTableL[i][j], vpdTableR[i][j]));
+ }
+ }
+ }
+ *pMinCalPower = (int16_t)(minPwrT4[0] / 2);
+
+ k = 0;
+ for (i = 0; i < numXpdGains; i++) {
+ if (i == (numXpdGains - 1))
+ pPdGainBoundaries[i] = (u16)(maxPwrT4[i] / 2);
+ else
+ pPdGainBoundaries[i] = (u16)((maxPwrT4[i] +
+ minPwrT4[i+1]) / 4);
+
+ pPdGainBoundaries[i] = min((u16)AR5416_MAX_RATE_POWER,
+ pPdGainBoundaries[i]);
+
+
+ if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
+ minDelta = pPdGainBoundaries[0] - 23;
+ pPdGainBoundaries[0] = 23;
+ } else
+ minDelta = 0;
+
+ if (i == 0) {
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ ss = (int16_t)(0 - (minPwrT4[i] / 2));
+ else
+ ss = 0;
+ } else
+ ss = (int16_t)((pPdGainBoundaries[i-1] -
+ (minPwrT4[i] / 2)) -
+ tPdGainOverlap + 1 + minDelta);
+
+ vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
+ vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+ while ((ss < 0) && (k < (AR9287_NUM_PDADC_VALUES - 1))) {
+ tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
+ pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
+ ss++;
+ }
+
+ sizeCurrVpdTable = (u8)((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
+ tgtIndex = (u8)(pPdGainBoundaries[i] +
+ tPdGainOverlap - (minPwrT4[i] / 2));
+ maxIndex = (tgtIndex < sizeCurrVpdTable) ?
+ tgtIndex : sizeCurrVpdTable;
+
+ while ((ss < maxIndex) && (k < (AR9287_NUM_PDADC_VALUES - 1)))
+ pPDADCValues[k++] = vpdTableI[i][ss++];
+
+ vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
+ vpdTableI[i][sizeCurrVpdTable - 2]);
+ vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+ if (tgtIndex > maxIndex) {
+ while ((ss <= tgtIndex) &&
+ (k < (AR9287_NUM_PDADC_VALUES - 1))) {
+ tmpVal = (int16_t) TMP_VAL_VPD_TABLE;
+ pPDADCValues[k++] = (u8)((tmpVal > 255) ?
+ 255 : tmpVal);
+ ss++;
+ }
+ }
+ }
+
+ while (i < AR9287_PD_GAINS_IN_MASK) {
+ pPdGainBoundaries[i] = pPdGainBoundaries[i-1];
+ i++;
+ }
+
+ while (k < AR9287_NUM_PDADC_VALUES) {
+ pPDADCValues[k] = pPDADCValues[k-1];
+ k++;
+ }
+
+#undef TMP_VAL_VPD_TABLE
+}
+
+static void ar9287_eeprom_get_tx_gain_index(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_data_op_loop_ar9287 *pRawDatasetOpLoop,
+ u8 *pCalChans, u16 availPiers,
+ int8_t *pPwr)
+{
+ u16 idxL = 0, idxR = 0, numPiers;
+ bool match;
+ struct chan_centers centers;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ for (numPiers = 0; numPiers < availPiers; numPiers++) {
+ if (pCalChans[numPiers] == AR9287_BCHAN_UNUSED)
+ break;
+ }
+
+ match = ath9k_hw_get_lower_upper_index(
+ (u8)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)),
+ pCalChans, numPiers,
+ &idxL, &idxR);
+
+ if (match) {
+ *pPwr = (int8_t) pRawDatasetOpLoop[idxL].pwrPdg[0][0];
+ } else {
+ *pPwr = ((int8_t) pRawDatasetOpLoop[idxL].pwrPdg[0][0] +
+ (int8_t) pRawDatasetOpLoop[idxR].pwrPdg[0][0])/2;
+ }
+
+}
+
+static void ar9287_eeprom_olpc_set_pdadcs(struct ath_hw *ah,
+ int32_t txPower, u16 chain)
+{
+ u32 tmpVal;
+ u32 a;
+
+ tmpVal = REG_READ(ah, 0xa270);
+ tmpVal = tmpVal & 0xFCFFFFFF;
+ tmpVal = tmpVal | (0x3 << 24);
+ REG_WRITE(ah, 0xa270, tmpVal);
+
+ tmpVal = REG_READ(ah, 0xb270);
+ tmpVal = tmpVal & 0xFCFFFFFF;
+ tmpVal = tmpVal | (0x3 << 24);
+ REG_WRITE(ah, 0xb270, tmpVal);
+
+ if (chain == 0) {
+ tmpVal = REG_READ(ah, 0xa398);
+ tmpVal = tmpVal & 0xff00ffff;
+ a = (txPower)&0xff;
+ tmpVal = tmpVal | (a << 16);
+ REG_WRITE(ah, 0xa398, tmpVal);
+ }
+
+ if (chain == 1) {
+ tmpVal = REG_READ(ah, 0xb398);
+ tmpVal = tmpVal & 0xff00ffff;
+ a = (txPower)&0xff;
+ tmpVal = tmpVal | (a << 16);
+ REG_WRITE(ah, 0xb398, tmpVal);
+ }
+}
+
+static void ath9k_hw_set_AR9287_power_cal_table(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ int16_t *pTxPowerIndexOffset)
+{
+ struct cal_data_per_freq_ar9287 *pRawDataset;
+ struct cal_data_op_loop_ar9287 *pRawDatasetOpenLoop;
+ u8 *pCalBChans = NULL;
+ u16 pdGainOverlap_t2;
+ u8 pdadcValues[AR9287_NUM_PDADC_VALUES];
+ u16 gainBoundaries[AR9287_PD_GAINS_IN_MASK];
+ u16 numPiers = 0, i, j;
+ int16_t tMinCalPower;
+ u16 numXpdGain, xpdMask;
+ u16 xpdGainValues[AR9287_NUM_PD_GAINS] = {0, 0, 0, 0};
+ u32 reg32, regOffset, regChainOffset;
+ int16_t modalIdx, diff = 0;
+ struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
+ modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
+ xpdMask = pEepData->modalHeader.xpdGain;
+ if ((pEepData->baseEepHeader.version & AR9287_EEP_VER_MINOR_MASK) >=
+ AR9287_EEP_MINOR_VER_2)
+ pdGainOverlap_t2 = pEepData->modalHeader.pdGainOverlap;
+ else
+ pdGainOverlap_t2 = (u16)(MS(REG_READ(ah, AR_PHY_TPCRG5),
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
+
+ if (IS_CHAN_2GHZ(chan)) {
+ pCalBChans = pEepData->calFreqPier2G;
+ numPiers = AR9287_NUM_2G_CAL_PIERS;
+ if (ath9k_hw_AR9287_get_eeprom(ah, EEP_OL_PWRCTRL)) {
+ pRawDatasetOpenLoop =
+ (struct cal_data_op_loop_ar9287 *)
+ pEepData->calPierData2G[0];
+ ah->initPDADC = pRawDatasetOpenLoop->vpdPdg[0][0];
+ }
+ }
+
+ numXpdGain = 0;
+ for (i = 1; i <= AR9287_PD_GAINS_IN_MASK; i++) {
+ if ((xpdMask >> (AR9287_PD_GAINS_IN_MASK - i)) & 1) {
+ if (numXpdGain >= AR9287_NUM_PD_GAINS)
+ break;
+ xpdGainValues[numXpdGain] =
+ (u16)(AR9287_PD_GAINS_IN_MASK-i);
+ numXpdGain++;
+ }
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
+ (numXpdGain - 1) & 0x3);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
+ xpdGainValues[0]);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
+ xpdGainValues[1]);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3,
+ xpdGainValues[2]);
+
+ for (i = 0; i < AR9287_MAX_CHAINS; i++) {
+ regChainOffset = i * 0x1000;
+ if (pEepData->baseEepHeader.txMask & (1 << i)) {
+ pRawDatasetOpenLoop = (struct cal_data_op_loop_ar9287 *)
+ pEepData->calPierData2G[i];
+ if (ath9k_hw_AR9287_get_eeprom(ah, EEP_OL_PWRCTRL)) {
+ int8_t txPower;
+ ar9287_eeprom_get_tx_gain_index(ah, chan,
+ pRawDatasetOpenLoop,
+ pCalBChans, numPiers,
+ &txPower);
+ ar9287_eeprom_olpc_set_pdadcs(ah, txPower, i);
+ } else {
+ pRawDataset =
+ (struct cal_data_per_freq_ar9287 *)
+ pEepData->calPierData2G[i];
+ ath9k_hw_get_AR9287_gain_boundaries_pdadcs(
+ ah, chan, pRawDataset,
+ pCalBChans, numPiers,
+ pdGainOverlap_t2,
+ &tMinCalPower, gainBoundaries,
+ pdadcValues, numXpdGain);
+ }
+
+ if (i == 0) {
+ if (!ath9k_hw_AR9287_get_eeprom(
+ ah, EEP_OL_PWRCTRL)) {
+ REG_WRITE(ah, AR_PHY_TPCRG5 +
+ regChainOffset,
+ SM(pdGainOverlap_t2,
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
+ SM(gainBoundaries[0],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1)
+ | SM(gainBoundaries[1],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2)
+ | SM(gainBoundaries[2],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3)
+ | SM(gainBoundaries[3],
+ AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
+ }
+ }
+
+ if ((int32_t)AR9287_PWR_TABLE_OFFSET_DB !=
+ pEepData->baseEepHeader.pwrTableOffset) {
+ diff = (u16)
+ (pEepData->baseEepHeader.pwrTableOffset
+ - (int32_t)AR9287_PWR_TABLE_OFFSET_DB);
+ diff *= 2;
+
+ for (j = 0;
+ j < ((u16)AR9287_NUM_PDADC_VALUES-diff);
+ j++)
+ pdadcValues[j] = pdadcValues[j+diff];
+
+ for (j = (u16)(AR9287_NUM_PDADC_VALUES-diff);
+ j < AR9287_NUM_PDADC_VALUES; j++)
+ pdadcValues[j] =
+ pdadcValues[
+ AR9287_NUM_PDADC_VALUES-diff];
+ }
+
+ if (!ath9k_hw_AR9287_get_eeprom(ah, EEP_OL_PWRCTRL)) {
+ regOffset = AR_PHY_BASE + (672 << 2) +
+ regChainOffset;
+ for (j = 0; j < 32; j++) {
+ reg32 = ((pdadcValues[4*j + 0]
+ & 0xFF) << 0) |
+ ((pdadcValues[4*j + 1]
+ & 0xFF) << 8) |
+ ((pdadcValues[4*j + 2]
+ & 0xFF) << 16) |
+ ((pdadcValues[4*j + 3]
+ & 0xFF) << 24) ;
+ REG_WRITE(ah, regOffset, reg32);
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "PDADC (%d,%4x): %4.4x %8.8x\n",
+ i, regChainOffset, regOffset,
+ reg32);
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "PDADC: Chain %d | "
+ "PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d |\n",
+ i, 4 * j, pdadcValues[4 * j],
+ 4 * j + 1,
+ pdadcValues[4 * j + 1],
+ 4 * j + 2,
+ pdadcValues[4 * j + 2],
+ 4 * j + 3,
+ pdadcValues[4 * j + 3]);
+
+ regOffset += 4;
+ }
+ }
+ }
+ }
+
+ *pTxPowerIndexOffset = 0;
+}
+
+static void ath9k_hw_set_AR9287_power_per_rate_table(struct ath_hw *ah,
+ struct ath9k_channel *chan, int16_t *ratesArray, u16 cfgCtl,
+ u16 AntennaReduction, u16 twiceMaxRegulatoryPower,
+ u16 powerLimit)
+{
+#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+ static const u16 tpScaleReductionTable[5] =
+ { 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+ int i;
+ int16_t twiceLargestAntenna;
+ struct cal_ctl_data_ar9287 *rep;
+ struct cal_target_power_leg targetPowerOfdm = {0, {0, 0, 0, 0} },
+ targetPowerCck = {0, {0, 0, 0, 0} };
+ struct cal_target_power_leg targetPowerOfdmExt = {0, {0, 0, 0, 0} },
+ targetPowerCckExt = {0, {0, 0, 0, 0} };
+ struct cal_target_power_ht targetPowerHt20,
+ targetPowerHt40 = {0, {0, 0, 0, 0} };
+ u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+ u16 ctlModesFor11g[] =
+ {CTL_11B, CTL_11G, CTL_2GHT20,
+ CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40};
+ u16 numCtlModes = 0, *pCtlMode = NULL, ctlMode, freq;
+ struct chan_centers centers;
+ int tx_chainmask;
+ u16 twiceMinEdgePower;
+ struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
+ tx_chainmask = ah->txchainmask;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ twiceLargestAntenna = max(pEepData->modalHeader.antennaGainCh[0],
+ pEepData->modalHeader.antennaGainCh[1]);
+
+ twiceLargestAntenna = (int16_t)min((AntennaReduction) -
+ twiceLargestAntenna, 0);
+
+ maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+ if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX)
+ maxRegAllowedPower -=
+ (tpScaleReductionTable[(regulatory->tp_scale)] * 2);
+
+ scaledPower = min(powerLimit, maxRegAllowedPower);
+
+ switch (ar5416_get_ntxchains(tx_chainmask)) {
+ case 1:
+ break;
+ case 2:
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ break;
+ case 3:
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ break;
+ }
+ scaledPower = max((u16)0, scaledPower);
+
+ if (IS_CHAN_2GHZ(chan)) {
+ numCtlModes =
+ ARRAY_SIZE(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40;
+ pCtlMode = ctlModesFor11g;
+
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPowerCck,
+ AR9287_NUM_2G_CCK_TARGET_POWERS,
+ &targetPowerCck, 4, false);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower2G,
+ AR9287_NUM_2G_20_TARGET_POWERS,
+ &targetPowerOfdm, 4, false);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower2GHT20,
+ AR9287_NUM_2G_20_TARGET_POWERS,
+ &targetPowerHt20, 8, false);
+
+ if (IS_CHAN_HT40(chan)) {
+ numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower2GHT40,
+ AR9287_NUM_2G_40_TARGET_POWERS,
+ &targetPowerHt40, 8, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPowerCck,
+ AR9287_NUM_2G_CCK_TARGET_POWERS,
+ &targetPowerCckExt, 4, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower2G,
+ AR9287_NUM_2G_20_TARGET_POWERS,
+ &targetPowerOfdmExt, 4, true);
+ }
+ }
+
+ for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+ bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
+ (pCtlMode[ctlMode] == CTL_2GHT40);
+ if (isHt40CtlMode)
+ freq = centers.synth_center;
+ else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+ freq = centers.ext_center;
+ else
+ freq = centers.ctl_center;
+
+ if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
+ ah->eep_ops->get_eeprom_rev(ah) <= 2)
+ twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+
+ for (i = 0; (i < AR9287_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
+ if ((((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ pEepData->ctlIndex[i]) ||
+ (((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ ((pEepData->ctlIndex[i] &
+ CTL_MODE_M) | SD_NO_CTL))) {
+
+ rep = &(pEepData->ctlData[i]);
+ twiceMinEdgePower = ath9k_hw_get_max_edge_power(
+ freq,
+ rep->ctlEdges[ar5416_get_ntxchains(
+ tx_chainmask) - 1],
+ IS_CHAN_2GHZ(chan), AR5416_NUM_BAND_EDGES);
+
+ if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL)
+ twiceMaxEdgePower = min(
+ twiceMaxEdgePower,
+ twiceMinEdgePower);
+ else {
+ twiceMaxEdgePower = twiceMinEdgePower;
+ break;
+ }
+ }
+ }
+
+ minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
+
+ switch (pCtlMode[ctlMode]) {
+ case CTL_11B:
+ for (i = 0;
+ i < ARRAY_SIZE(targetPowerCck.tPow2x);
+ i++) {
+ targetPowerCck.tPow2x[i] = (u8)min(
+ (u16)targetPowerCck.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_11A:
+ case CTL_11G:
+ for (i = 0;
+ i < ARRAY_SIZE(targetPowerOfdm.tPow2x);
+ i++) {
+ targetPowerOfdm.tPow2x[i] = (u8)min(
+ (u16)targetPowerOfdm.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_5GHT20:
+ case CTL_2GHT20:
+ for (i = 0;
+ i < ARRAY_SIZE(targetPowerHt20.tPow2x);
+ i++) {
+ targetPowerHt20.tPow2x[i] = (u8)min(
+ (u16)targetPowerHt20.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_11B_EXT:
+ targetPowerCckExt.tPow2x[0] = (u8)min(
+ (u16)targetPowerCckExt.tPow2x[0],
+ minCtlPower);
+ break;
+ case CTL_11A_EXT:
+ case CTL_11G_EXT:
+ targetPowerOfdmExt.tPow2x[0] = (u8)min(
+ (u16)targetPowerOfdmExt.tPow2x[0],
+ minCtlPower);
+ break;
+ case CTL_5GHT40:
+ case CTL_2GHT40:
+ for (i = 0;
+ i < ARRAY_SIZE(targetPowerHt40.tPow2x);
+ i++) {
+ targetPowerHt40.tPow2x[i] = (u8)min(
+ (u16)targetPowerHt40.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ ratesArray[rate6mb] =
+ ratesArray[rate9mb] =
+ ratesArray[rate12mb] =
+ ratesArray[rate18mb] =
+ ratesArray[rate24mb] =
+ targetPowerOfdm.tPow2x[0];
+
+ ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
+ ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
+ ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
+ ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
+
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
+ ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
+
+ if (IS_CHAN_2GHZ(chan)) {
+ ratesArray[rate1l] = targetPowerCck.tPow2x[0];
+ ratesArray[rate2s] = ratesArray[rate2l] =
+ targetPowerCck.tPow2x[1];
+ ratesArray[rate5_5s] = ratesArray[rate5_5l] =
+ targetPowerCck.tPow2x[2];
+ ratesArray[rate11s] = ratesArray[rate11l] =
+ targetPowerCck.tPow2x[3];
+ }
+ if (IS_CHAN_HT40(chan)) {
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++)
+ ratesArray[rateHt40_0 + i] = targetPowerHt40.tPow2x[i];
+
+ ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
+ ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
+ ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
+ if (IS_CHAN_2GHZ(chan))
+ ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0];
+ }
+
+#undef REDUCE_SCALED_POWER_BY_TWO_CHAIN
+#undef REDUCE_SCALED_POWER_BY_THREE_CHAIN
+}
+
+static void ath9k_hw_AR9287_set_txpower(struct ath_hw *ah,
+ struct ath9k_channel *chan, u16 cfgCtl,
+ u8 twiceAntennaReduction,
+ u8 twiceMaxRegulatoryPower,
+ u8 powerLimit)
+{
+#define INCREASE_MAXPOW_BY_TWO_CHAIN 6
+#define INCREASE_MAXPOW_BY_THREE_CHAIN 10
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
+ struct modal_eep_ar9287_header *pModal = &pEepData->modalHeader;
+ int16_t ratesArray[Ar5416RateSize];
+ int16_t txPowerIndexOffset = 0;
+ u8 ht40PowerIncForPdadc = 2;
+ int i;
+
+ memset(ratesArray, 0, sizeof(ratesArray));
+
+ if ((pEepData->baseEepHeader.version & AR9287_EEP_VER_MINOR_MASK) >=
+ AR9287_EEP_MINOR_VER_2)
+ ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
+
+ ath9k_hw_set_AR9287_power_per_rate_table(ah, chan,
+ &ratesArray[0], cfgCtl,
+ twiceAntennaReduction,
+ twiceMaxRegulatoryPower,
+ powerLimit);
+
+ ath9k_hw_set_AR9287_power_cal_table(ah, chan, &txPowerIndexOffset);
+
+ for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
+ ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]);
+ if (ratesArray[i] > AR9287_MAX_RATE_POWER)
+ ratesArray[i] = AR9287_MAX_RATE_POWER;
+ }
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ for (i = 0; i < Ar5416RateSize; i++)
+ ratesArray[i] -= AR9287_PWR_TABLE_OFFSET_DB * 2;
+ }
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
+ ATH9K_POW_SM(ratesArray[rate18mb], 24)
+ | ATH9K_POW_SM(ratesArray[rate12mb], 16)
+ | ATH9K_POW_SM(ratesArray[rate9mb], 8)
+ | ATH9K_POW_SM(ratesArray[rate6mb], 0));
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
+ ATH9K_POW_SM(ratesArray[rate54mb], 24)
+ | ATH9K_POW_SM(ratesArray[rate48mb], 16)
+ | ATH9K_POW_SM(ratesArray[rate36mb], 8)
+ | ATH9K_POW_SM(ratesArray[rate24mb], 0));
+
+ if (IS_CHAN_2GHZ(chan)) {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+ ATH9K_POW_SM(ratesArray[rate2s], 24)
+ | ATH9K_POW_SM(ratesArray[rate2l], 16)
+ | ATH9K_POW_SM(ratesArray[rateXr], 8)
+ | ATH9K_POW_SM(ratesArray[rate1l], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+ ATH9K_POW_SM(ratesArray[rate11s], 24)
+ | ATH9K_POW_SM(ratesArray[rate11l], 16)
+ | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
+ | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
+ }
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
+ ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt20_0], 0));
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
+ ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt20_4], 0));
+
+ if (IS_CHAN_HT40(chan)) {
+ if (ath9k_hw_AR9287_get_eeprom(ah, EEP_OL_PWRCTRL)) {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
+ ATH9K_POW_SM(ratesArray[rateHt40_3], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_2], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_1], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_0], 0));
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
+ ATH9K_POW_SM(ratesArray[rateHt40_7], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_6], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_5], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_4], 0));
+ } else {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
+ ATH9K_POW_SM(ratesArray[rateHt40_3] +
+ ht40PowerIncForPdadc, 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_2] +
+ ht40PowerIncForPdadc, 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_1] +
+ ht40PowerIncForPdadc, 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_0] +
+ ht40PowerIncForPdadc, 0));
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
+ ATH9K_POW_SM(ratesArray[rateHt40_7] +
+ ht40PowerIncForPdadc, 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_6] +
+ ht40PowerIncForPdadc, 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_5] +
+ ht40PowerIncForPdadc, 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_4] +
+ ht40PowerIncForPdadc, 0));
+ }
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
+ ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
+ | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
+ | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
+ | ATH9K_POW_SM(ratesArray[rateDupCck], 0));
+ }
+
+ if (IS_CHAN_2GHZ(chan))
+ i = rate1l;
+ else
+ i = rate6mb;
+
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ regulatory->max_power_level =
+ ratesArray[i] + AR9287_PWR_TABLE_OFFSET_DB * 2;
+ else
+ regulatory->max_power_level = ratesArray[i];
+
+ switch (ar5416_get_ntxchains(ah->txchainmask)) {
+ case 1:
+ break;
+ case 2:
+ regulatory->max_power_level +=
+ INCREASE_MAXPOW_BY_TWO_CHAIN;
+ break;
+ case 3:
+ regulatory->max_power_level +=
+ INCREASE_MAXPOW_BY_THREE_CHAIN;
+ break;
+ default:
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Invalid chainmask configuration\n");
+ break;
+ }
+}
+
+static void ath9k_hw_AR9287_set_addac(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+}
+
+static void ath9k_hw_AR9287_set_board_values(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+ struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
+ u16 antWrites[AR9287_ANT_16S];
+ u32 regChainOffset;
+ u8 txRxAttenLocal;
+ int i, j, offset_num;
+
+ pModal = &eep->modalHeader;
+
+ antWrites[0] = (u16)((pModal->antCtrlCommon >> 28) & 0xF);
+ antWrites[1] = (u16)((pModal->antCtrlCommon >> 24) & 0xF);
+ antWrites[2] = (u16)((pModal->antCtrlCommon >> 20) & 0xF);
+ antWrites[3] = (u16)((pModal->antCtrlCommon >> 16) & 0xF);
+ antWrites[4] = (u16)((pModal->antCtrlCommon >> 12) & 0xF);
+ antWrites[5] = (u16)((pModal->antCtrlCommon >> 8) & 0xF);
+ antWrites[6] = (u16)((pModal->antCtrlCommon >> 4) & 0xF);
+ antWrites[7] = (u16)(pModal->antCtrlCommon & 0xF);
+
+ offset_num = 8;
+
+ for (i = 0, j = offset_num; i < AR9287_MAX_CHAINS; i++) {
+ antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 28) & 0xf);
+ antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 10) & 0x3);
+ antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 8) & 0x3);
+ antWrites[j++] = 0;
+ antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 6) & 0x3);
+ antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 4) & 0x3);
+ antWrites[j++] = (u16)((pModal->antCtrlChain[i] >> 2) & 0x3);
+ antWrites[j++] = (u16)(pModal->antCtrlChain[i] & 0x3);
+ }
+
+ REG_WRITE(ah, AR_PHY_SWITCH_COM,
+ ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+
+ for (i = 0; i < AR9287_MAX_CHAINS; i++) {
+ regChainOffset = i * 0x1000;
+
+ REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
+ pModal->antCtrlChain[i]);
+
+ REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
+ (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset)
+ & ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
+ SM(pModal->iqCalICh[i],
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
+ SM(pModal->iqCalQCh[i],
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
+
+ txRxAttenLocal = pModal->txRxAttenCh[i];
+
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
+ pModal->bswMargin[i]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ AR_PHY_GAIN_2GHZ_XATTEN1_DB,
+ pModal->bswAtten[i]);
+ REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset,
+ AR9280_PHY_RXGAIN_TXRX_ATTEN,
+ txRxAttenLocal);
+ REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset,
+ AR9280_PHY_RXGAIN_TXRX_MARGIN,
+ pModal->rxTxMarginCh[i]);
+ }
+
+
+ if (IS_CHAN_HT40(chan))
+ REG_RMW_FIELD(ah, AR_PHY_SETTLING,
+ AR_PHY_SETTLING_SWITCH, pModal->swSettleHt40);
+ else
+ REG_RMW_FIELD(ah, AR_PHY_SETTLING,
+ AR_PHY_SETTLING_SWITCH, pModal->switchSettling);
+
+ REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+ AR_PHY_DESIRED_SZ_ADC, pModal->adcDesiredSize);
+
+ REG_WRITE(ah, AR_PHY_RF_CTL4,
+ SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF)
+ | SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF)
+ | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON)
+ | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON));
+
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL3,
+ AR_PHY_TX_END_TO_A2_RX_ON, pModal->txEndToRxOn);
+
+ REG_RMW_FIELD(ah, AR_PHY_CCA,
+ AR9280_PHY_CCA_THRESH62, pModal->thresh62);
+ REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0,
+ AR_PHY_EXT_CCA0_THRESH62, pModal->thresh62);
+
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0, AR9287_AN_RF2G3_DB1,
+ AR9287_AN_RF2G3_DB1_S, pModal->db1);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0, AR9287_AN_RF2G3_DB2,
+ AR9287_AN_RF2G3_DB2_S, pModal->db2);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
+ AR9287_AN_RF2G3_OB_CCK,
+ AR9287_AN_RF2G3_OB_CCK_S, pModal->ob_cck);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
+ AR9287_AN_RF2G3_OB_PSK,
+ AR9287_AN_RF2G3_OB_PSK_S, pModal->ob_psk);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
+ AR9287_AN_RF2G3_OB_QAM,
+ AR9287_AN_RF2G3_OB_QAM_S, pModal->ob_qam);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH0,
+ AR9287_AN_RF2G3_OB_PAL_OFF,
+ AR9287_AN_RF2G3_OB_PAL_OFF_S,
+ pModal->ob_pal_off);
+
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
+ AR9287_AN_RF2G3_DB1, AR9287_AN_RF2G3_DB1_S,
+ pModal->db1);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1, AR9287_AN_RF2G3_DB2,
+ AR9287_AN_RF2G3_DB2_S, pModal->db2);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
+ AR9287_AN_RF2G3_OB_CCK,
+ AR9287_AN_RF2G3_OB_CCK_S, pModal->ob_cck);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
+ AR9287_AN_RF2G3_OB_PSK,
+ AR9287_AN_RF2G3_OB_PSK_S, pModal->ob_psk);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
+ AR9287_AN_RF2G3_OB_QAM,
+ AR9287_AN_RF2G3_OB_QAM_S, pModal->ob_qam);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_RF2G3_CH1,
+ AR9287_AN_RF2G3_OB_PAL_OFF,
+ AR9287_AN_RF2G3_OB_PAL_OFF_S,
+ pModal->ob_pal_off);
+
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
+ AR_PHY_TX_END_DATA_START, pModal->txFrameToDataStart);
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
+ AR_PHY_TX_END_PA_ON, pModal->txFrameToPaOn);
+
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_TOP2,
+ AR9287_AN_TOP2_XPABIAS_LVL,
+ AR9287_AN_TOP2_XPABIAS_LVL_S,
+ pModal->xpaBiasLvl);
+}
+
+static u8 ath9k_hw_AR9287_get_num_ant_config(struct ath_hw *ah,
+ enum ieee80211_band freq_band)
+{
+ return 1;
+}
+
+static u16 ath9k_hw_AR9287_get_eeprom_antenna_cfg(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+ struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
+
+ return pModal->antCtrlCommon & 0xFFFF;
+}
+
+static u16 ath9k_hw_AR9287_get_spur_channel(struct ath_hw *ah,
+ u16 i, bool is2GHz)
+{
+#define EEP_MAP9287_SPURCHAN \
+ (ah->eeprom.map9287.modalHeader.spurChans[i].spurChan)
+ u16 spur_val = AR_NO_SPUR;
+
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Getting spur idx %d is2Ghz. %d val %x\n",
+ i, is2GHz, ah->config.spurchans[i][is2GHz]);
+
+ switch (ah->config.spurmode) {
+ case SPUR_DISABLE:
+ break;
+ case SPUR_ENABLE_IOCTL:
+ spur_val = ah->config.spurchans[i][is2GHz];
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Getting spur val from new loc. %d\n", spur_val);
+ break;
+ case SPUR_ENABLE_EEPROM:
+ spur_val = EEP_MAP9287_SPURCHAN;
+ break;
+ }
+
+ return spur_val;
+
+#undef EEP_MAP9287_SPURCHAN
+}
+
+const struct eeprom_ops eep_AR9287_ops = {
+ .check_eeprom = ath9k_hw_AR9287_check_eeprom,
+ .get_eeprom = ath9k_hw_AR9287_get_eeprom,
+ .fill_eeprom = ath9k_hw_AR9287_fill_eeprom,
+ .get_eeprom_ver = ath9k_hw_AR9287_get_eeprom_ver,
+ .get_eeprom_rev = ath9k_hw_AR9287_get_eeprom_rev,
+ .get_num_ant_config = ath9k_hw_AR9287_get_num_ant_config,
+ .get_eeprom_antenna_cfg = ath9k_hw_AR9287_get_eeprom_antenna_cfg,
+ .set_board_values = ath9k_hw_AR9287_set_board_values,
+ .set_addac = ath9k_hw_AR9287_set_addac,
+ .set_txpower = ath9k_hw_AR9287_set_txpower,
+ .get_spur_channel = ath9k_hw_AR9287_get_spur_channel
+};
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
new file mode 100644
index 0000000..ae7fb5d
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -0,0 +1,1387 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static void ath9k_get_txgain_index(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct calDataPerFreqOpLoop *rawDatasetOpLoop,
+ u8 *calChans, u16 availPiers, u8 *pwr, u8 *pcdacIdx)
+{
+ u8 pcdac, i = 0;
+ u16 idxL = 0, idxR = 0, numPiers;
+ bool match;
+ struct chan_centers centers;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ for (numPiers = 0; numPiers < availPiers; numPiers++)
+ if (calChans[numPiers] == AR5416_BCHAN_UNUSED)
+ break;
+
+ match = ath9k_hw_get_lower_upper_index(
+ (u8)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)),
+ calChans, numPiers, &idxL, &idxR);
+ if (match) {
+ pcdac = rawDatasetOpLoop[idxL].pcdac[0][0];
+ *pwr = rawDatasetOpLoop[idxL].pwrPdg[0][0];
+ } else {
+ pcdac = rawDatasetOpLoop[idxR].pcdac[0][0];
+ *pwr = (rawDatasetOpLoop[idxL].pwrPdg[0][0] +
+ rawDatasetOpLoop[idxR].pwrPdg[0][0])/2;
+ }
+
+ while (pcdac > ah->originalGain[i] &&
+ i < (AR9280_TX_GAIN_TABLE_SIZE - 1))
+ i++;
+
+ *pcdacIdx = i;
+ return;
+}
+
+static void ath9k_olc_get_pdadcs(struct ath_hw *ah,
+ u32 initTxGain,
+ int txPower,
+ u8 *pPDADCValues)
+{
+ u32 i;
+ u32 offset;
+
+ REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_0,
+ AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
+ REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_1,
+ AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
+
+ REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL7,
+ AR_PHY_TX_PWRCTRL_INIT_TX_GAIN, initTxGain);
+
+ offset = txPower;
+ for (i = 0; i < AR5416_NUM_PDADC_VALUES; i++)
+ if (i < offset)
+ pPDADCValues[i] = 0x0;
+ else
+ pPDADCValues[i] = 0xFF;
+}
+
+static int ath9k_hw_def_get_eeprom_ver(struct ath_hw *ah)
+{
+ return ((ah->eeprom.def.baseEepHeader.version >> 12) & 0xF);
+}
+
+static int ath9k_hw_def_get_eeprom_rev(struct ath_hw *ah)
+{
+ return ((ah->eeprom.def.baseEepHeader.version) & 0xFFF);
+}
+
+static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah)
+{
+#define SIZE_EEPROM_DEF (sizeof(struct ar5416_eeprom_def) / sizeof(u16))
+ u16 *eep_data = (u16 *)&ah->eeprom.def;
+ int addr, ar5416_eep_start_loc = 0x100;
+
+ for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) {
+ if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
+ eep_data)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Unable to read eeprom region\n");
+ return false;
+ }
+ eep_data++;
+ }
+ return true;
+#undef SIZE_EEPROM_DEF
+}
+
+static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
+{
+ struct ar5416_eeprom_def *eep =
+ (struct ar5416_eeprom_def *) &ah->eeprom.def;
+ u16 *eepdata, temp, magic, magic2;
+ u32 sum = 0, el;
+ bool need_swap = false;
+ int i, addr, size;
+
+ if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n");
+ return false;
+ }
+
+ if (!ath9k_hw_use_flash(ah)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Read Magic = 0x%04X\n", magic);
+
+ if (magic != AR5416_EEPROM_MAGIC) {
+ magic2 = swab16(magic);
+
+ if (magic2 == AR5416_EEPROM_MAGIC) {
+ size = sizeof(struct ar5416_eeprom_def);
+ need_swap = true;
+ eepdata = (u16 *) (&ah->eeprom);
+
+ for (addr = 0; addr < size / sizeof(u16); addr++) {
+ temp = swab16(*eepdata);
+ *eepdata = temp;
+ eepdata++;
+ }
+ } else {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Invalid EEPROM Magic. "
+ "Endianness mismatch.\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
+ need_swap ? "True" : "False");
+
+ if (need_swap)
+ el = swab16(ah->eeprom.def.baseEepHeader.length);
+ else
+ el = ah->eeprom.def.baseEepHeader.length;
+
+ if (el > sizeof(struct ar5416_eeprom_def))
+ el = sizeof(struct ar5416_eeprom_def) / sizeof(u16);
+ else
+ el = el / sizeof(u16);
+
+ eepdata = (u16 *)(&ah->eeprom);
+
+ for (i = 0; i < el; i++)
+ sum ^= *eepdata++;
+
+ if (need_swap) {
+ u32 integer, j;
+ u16 word;
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "EEPROM Endianness is not native.. Changing.\n");
+
+ word = swab16(eep->baseEepHeader.length);
+ eep->baseEepHeader.length = word;
+
+ word = swab16(eep->baseEepHeader.checksum);
+ eep->baseEepHeader.checksum = word;
+
+ word = swab16(eep->baseEepHeader.version);
+ eep->baseEepHeader.version = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[0]);
+ eep->baseEepHeader.regDmn[0] = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[1]);
+ eep->baseEepHeader.regDmn[1] = word;
+
+ word = swab16(eep->baseEepHeader.rfSilent);
+ eep->baseEepHeader.rfSilent = word;
+
+ word = swab16(eep->baseEepHeader.blueToothOptions);
+ eep->baseEepHeader.blueToothOptions = word;
+
+ word = swab16(eep->baseEepHeader.deviceCap);
+ eep->baseEepHeader.deviceCap = word;
+
+ for (j = 0; j < ARRAY_SIZE(eep->modalHeader); j++) {
+ struct modal_eep_header *pModal =
+ &eep->modalHeader[j];
+ integer = swab32(pModal->antCtrlCommon);
+ pModal->antCtrlCommon = integer;
+
+ for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ integer = swab32(pModal->antCtrlChain[i]);
+ pModal->antCtrlChain[i] = integer;
+ }
+
+ for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
+ word = swab16(pModal->spurChans[i].spurChan);
+ pModal->spurChans[i].spurChan = word;
+ }
+ }
+ }
+
+ if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
+ ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+ sum, ah->eep_ops->get_eeprom_ver(ah));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah,
+ enum eeprom_param param)
+{
+ struct ar5416_eeprom_def *eep = &ah->eeprom.def;
+ struct modal_eep_header *pModal = eep->modalHeader;
+ struct base_eep_header *pBase = &eep->baseEepHeader;
+
+ switch (param) {
+ case EEP_NFTHRESH_5:
+ return pModal[0].noiseFloorThreshCh[0];
+ case EEP_NFTHRESH_2:
+ return pModal[1].noiseFloorThreshCh[0];
+ case AR_EEPROM_MAC(0):
+ return pBase->macAddr[0] << 8 | pBase->macAddr[1];
+ case AR_EEPROM_MAC(1):
+ return pBase->macAddr[2] << 8 | pBase->macAddr[3];
+ case AR_EEPROM_MAC(2):
+ return pBase->macAddr[4] << 8 | pBase->macAddr[5];
+ case EEP_REG_0:
+ return pBase->regDmn[0];
+ case EEP_REG_1:
+ return pBase->regDmn[1];
+ case EEP_OP_CAP:
+ return pBase->deviceCap;
+ case EEP_OP_MODE:
+ return pBase->opCapFlags;
+ case EEP_RF_SILENT:
+ return pBase->rfSilent;
+ case EEP_OB_5:
+ return pModal[0].ob;
+ case EEP_DB_5:
+ return pModal[0].db;
+ case EEP_OB_2:
+ return pModal[1].ob;
+ case EEP_DB_2:
+ return pModal[1].db;
+ case EEP_MINOR_REV:
+ return AR5416_VER_MASK;
+ case EEP_TX_MASK:
+ return pBase->txMask;
+ case EEP_RX_MASK:
+ return pBase->rxMask;
+ case EEP_RXGAIN_TYPE:
+ return pBase->rxGainType;
+ case EEP_TXGAIN_TYPE:
+ return pBase->txGainType;
+ case EEP_OL_PWRCTRL:
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
+ return pBase->openLoopPwrCntl ? true : false;
+ else
+ return false;
+ case EEP_RC_CHAIN_MASK:
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
+ return pBase->rcChainMask;
+ else
+ return 0;
+ case EEP_DAC_HPWR_5G:
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_20)
+ return pBase->dacHiPwrMode_5G;
+ else
+ return 0;
+ case EEP_FRAC_N_5G:
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_22)
+ return pBase->frac_n_5g;
+ else
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static void ath9k_hw_def_set_gain(struct ath_hw *ah,
+ struct modal_eep_header *pModal,
+ struct ar5416_eeprom_def *eep,
+ u8 txRxAttenLocal, int regChainOffset, int i)
+{
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
+ txRxAttenLocal = pModal->txRxAttenCh[i];
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
+ pModal->bswMargin[i]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ AR_PHY_GAIN_2GHZ_XATTEN1_DB,
+ pModal->bswAtten[i]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
+ pModal->xatten2Margin[i]);
+ REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ AR_PHY_GAIN_2GHZ_XATTEN2_DB,
+ pModal->xatten2Db[i]);
+ } else {
+ REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
+ ~AR_PHY_GAIN_2GHZ_BSW_MARGIN)
+ | SM(pModal-> bswMargin[i],
+ AR_PHY_GAIN_2GHZ_BSW_MARGIN));
+ REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
+ (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
+ ~AR_PHY_GAIN_2GHZ_BSW_ATTEN)
+ | SM(pModal->bswAtten[i],
+ AR_PHY_GAIN_2GHZ_BSW_ATTEN));
+ }
+ }
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ REG_RMW_FIELD(ah,
+ AR_PHY_RXGAIN + regChainOffset,
+ AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
+ REG_RMW_FIELD(ah,
+ AR_PHY_RXGAIN + regChainOffset,
+ AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
+ } else {
+ REG_WRITE(ah,
+ AR_PHY_RXGAIN + regChainOffset,
+ (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) &
+ ~AR_PHY_RXGAIN_TXRX_ATTEN)
+ | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN));
+ REG_WRITE(ah,
+ AR_PHY_GAIN_2GHZ + regChainOffset,
+ (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) &
+ ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) |
+ SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN));
+ }
+}
+
+static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct modal_eep_header *pModal;
+ struct ar5416_eeprom_def *eep = &ah->eeprom.def;
+ int i, regChainOffset;
+ u8 txRxAttenLocal;
+
+ pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+ txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44;
+
+ REG_WRITE(ah, AR_PHY_SWITCH_COM,
+ ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+
+ for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ if (AR_SREV_9280(ah)) {
+ if (i >= 2)
+ break;
+ }
+
+ if (AR_SREV_5416_20_OR_LATER(ah) &&
+ (ah->rxchainmask == 5 || ah->txchainmask == 5) && (i != 0))
+ regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+ else
+ regChainOffset = i * 0x1000;
+
+ REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset,
+ pModal->antCtrlChain[i]);
+
+ REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset,
+ (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) &
+ ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF |
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
+ SM(pModal->iqCalICh[i],
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
+ SM(pModal->iqCalQCh[i],
+ AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));
+
+ if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah))
+ ath9k_hw_def_set_gain(ah, pModal, eep, txRxAttenLocal,
+ regChainOffset, i);
+ }
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ if (IS_CHAN_2GHZ(chan)) {
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
+ AR_AN_RF2G1_CH0_OB,
+ AR_AN_RF2G1_CH0_OB_S,
+ pModal->ob);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH0,
+ AR_AN_RF2G1_CH0_DB,
+ AR_AN_RF2G1_CH0_DB_S,
+ pModal->db);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
+ AR_AN_RF2G1_CH1_OB,
+ AR_AN_RF2G1_CH1_OB_S,
+ pModal->ob_ch1);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF2G1_CH1,
+ AR_AN_RF2G1_CH1_DB,
+ AR_AN_RF2G1_CH1_DB_S,
+ pModal->db_ch1);
+ } else {
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
+ AR_AN_RF5G1_CH0_OB5,
+ AR_AN_RF5G1_CH0_OB5_S,
+ pModal->ob);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH0,
+ AR_AN_RF5G1_CH0_DB5,
+ AR_AN_RF5G1_CH0_DB5_S,
+ pModal->db);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
+ AR_AN_RF5G1_CH1_OB5,
+ AR_AN_RF5G1_CH1_OB5_S,
+ pModal->ob_ch1);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_RF5G1_CH1,
+ AR_AN_RF5G1_CH1_DB5,
+ AR_AN_RF5G1_CH1_DB5_S,
+ pModal->db_ch1);
+ }
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
+ AR_AN_TOP2_XPABIAS_LVL,
+ AR_AN_TOP2_XPABIAS_LVL_S,
+ pModal->xpaBiasLvl);
+ ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
+ AR_AN_TOP2_LOCALBIAS,
+ AR_AN_TOP2_LOCALBIAS_S,
+ pModal->local_bias);
+ REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
+ pModal->force_xpaon);
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
+ pModal->switchSettling);
+ REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC,
+ pModal->adcDesiredSize);
+
+ if (!AR_SREV_9280_10_OR_LATER(ah))
+ REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+ AR_PHY_DESIRED_SZ_PGA,
+ pModal->pgaDesiredSize);
+
+ REG_WRITE(ah, AR_PHY_RF_CTL4,
+ SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF)
+ | SM(pModal->txEndToXpaOff,
+ AR_PHY_RF_CTL4_TX_END_XPAB_OFF)
+ | SM(pModal->txFrameToXpaOn,
+ AR_PHY_RF_CTL4_FRAME_XPAA_ON)
+ | SM(pModal->txFrameToXpaOn,
+ AR_PHY_RF_CTL4_FRAME_XPAB_ON));
+
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
+ pModal->txEndToRxOn);
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
+ pModal->thresh62);
+ REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0,
+ AR_PHY_EXT_CCA0_THRESH62,
+ pModal->thresh62);
+ } else {
+ REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62,
+ pModal->thresh62);
+ REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
+ AR_PHY_EXT_CCA_THRESH62,
+ pModal->thresh62);
+ }
+
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_2) {
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL2,
+ AR_PHY_TX_END_DATA_START,
+ pModal->txFrameToDataStart);
+ REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_END_PA_ON,
+ pModal->txFrameToPaOn);
+ }
+
+ if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) {
+ if (IS_CHAN_HT40(chan))
+ REG_RMW_FIELD(ah, AR_PHY_SETTLING,
+ AR_PHY_SETTLING_SWITCH,
+ pModal->swSettleHt40);
+ }
+
+ if (AR_SREV_9280_20_OR_LATER(ah) &&
+ AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19)
+ REG_RMW_FIELD(ah, AR_PHY_CCK_TX_CTRL,
+ AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK,
+ pModal->miscBits);
+
+
+ if (AR_SREV_9280_20(ah) && AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_20) {
+ if (IS_CHAN_2GHZ(chan))
+ REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
+ eep->baseEepHeader.dacLpMode);
+ else if (eep->baseEepHeader.dacHiPwrMode_5G)
+ REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, 0);
+ else
+ REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
+ eep->baseEepHeader.dacLpMode);
+
+ REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
+ pModal->miscBits >> 2);
+
+ REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL9,
+ AR_PHY_TX_DESIRED_SCALE_CCK,
+ eep->baseEepHeader.desiredScaleCCK);
+ }
+}
+
+static void ath9k_hw_def_set_addac(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+#define XPA_LVL_FREQ(cnt) (pModal->xpaBiasLvlFreq[cnt])
+ struct modal_eep_header *pModal;
+ struct ar5416_eeprom_def *eep = &ah->eeprom.def;
+ u8 biaslevel;
+
+ if (ah->hw_version.macVersion != AR_SREV_VERSION_9160)
+ return;
+
+ if (ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_MINOR_VER_7)
+ return;
+
+ pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+
+ if (pModal->xpaBiasLvl != 0xff) {
+ biaslevel = pModal->xpaBiasLvl;
+ } else {
+ u16 resetFreqBin, freqBin, freqCount = 0;
+ struct chan_centers centers;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ resetFreqBin = FREQ2FBIN(centers.synth_center,
+ IS_CHAN_2GHZ(chan));
+ freqBin = XPA_LVL_FREQ(0) & 0xff;
+ biaslevel = (u8) (XPA_LVL_FREQ(0) >> 14);
+
+ freqCount++;
+
+ while (freqCount < 3) {
+ if (XPA_LVL_FREQ(freqCount) == 0x0)
+ break;
+
+ freqBin = XPA_LVL_FREQ(freqCount) & 0xff;
+ if (resetFreqBin >= freqBin)
+ biaslevel = (u8)(XPA_LVL_FREQ(freqCount) >> 14);
+ else
+ break;
+ freqCount++;
+ }
+ }
+
+ if (IS_CHAN_2GHZ(chan)) {
+ INI_RA(&ah->iniAddac, 7, 1) = (INI_RA(&ah->iniAddac,
+ 7, 1) & (~0x18)) | biaslevel << 3;
+ } else {
+ INI_RA(&ah->iniAddac, 6, 1) = (INI_RA(&ah->iniAddac,
+ 6, 1) & (~0xc0)) | biaslevel << 6;
+ }
+#undef XPA_LVL_FREQ
+}
+
+static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ struct cal_data_per_freq *pRawDataSet,
+ u8 *bChans, u16 availPiers,
+ u16 tPdGainOverlap, int16_t *pMinCalPower,
+ u16 *pPdGainBoundaries, u8 *pPDADCValues,
+ u16 numXpdGains)
+{
+ int i, j, k;
+ int16_t ss;
+ u16 idxL = 0, idxR = 0, numPiers;
+ static u8 vpdTableL[AR5416_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+ static u8 vpdTableR[AR5416_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+ static u8 vpdTableI[AR5416_NUM_PD_GAINS]
+ [AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+
+ u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
+ u8 minPwrT4[AR5416_NUM_PD_GAINS];
+ u8 maxPwrT4[AR5416_NUM_PD_GAINS];
+ int16_t vpdStep;
+ int16_t tmpVal;
+ u16 sizeCurrVpdTable, maxIndex, tgtIndex;
+ bool match;
+ int16_t minDelta = 0;
+ struct chan_centers centers;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ for (numPiers = 0; numPiers < availPiers; numPiers++) {
+ if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
+ break;
+ }
+
+ match = ath9k_hw_get_lower_upper_index((u8)FREQ2FBIN(centers.synth_center,
+ IS_CHAN_2GHZ(chan)),
+ bChans, numPiers, &idxL, &idxR);
+
+ if (match) {
+ for (i = 0; i < numXpdGains; i++) {
+ minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
+ maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pRawDataSet[idxL].pwrPdg[i],
+ pRawDataSet[idxL].vpdPdg[i],
+ AR5416_PD_GAIN_ICEPTS,
+ vpdTableI[i]);
+ }
+ } else {
+ for (i = 0; i < numXpdGains; i++) {
+ pVpdL = pRawDataSet[idxL].vpdPdg[i];
+ pPwrL = pRawDataSet[idxL].pwrPdg[i];
+ pVpdR = pRawDataSet[idxR].vpdPdg[i];
+ pPwrR = pRawDataSet[idxR].pwrPdg[i];
+
+ minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
+
+ maxPwrT4[i] =
+ min(pPwrL[AR5416_PD_GAIN_ICEPTS - 1],
+ pPwrR[AR5416_PD_GAIN_ICEPTS - 1]);
+
+
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pPwrL, pVpdL,
+ AR5416_PD_GAIN_ICEPTS,
+ vpdTableL[i]);
+ ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+ pPwrR, pVpdR,
+ AR5416_PD_GAIN_ICEPTS,
+ vpdTableR[i]);
+
+ for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
+ vpdTableI[i][j] =
+ (u8)(ath9k_hw_interpolate((u16)
+ FREQ2FBIN(centers.
+ synth_center,
+ IS_CHAN_2GHZ
+ (chan)),
+ bChans[idxL], bChans[idxR],
+ vpdTableL[i][j], vpdTableR[i][j]));
+ }
+ }
+ }
+
+ *pMinCalPower = (int16_t)(minPwrT4[0] / 2);
+
+ k = 0;
+
+ for (i = 0; i < numXpdGains; i++) {
+ if (i == (numXpdGains - 1))
+ pPdGainBoundaries[i] =
+ (u16)(maxPwrT4[i] / 2);
+ else
+ pPdGainBoundaries[i] =
+ (u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
+
+ pPdGainBoundaries[i] =
+ min((u16)AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);
+
+ if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
+ minDelta = pPdGainBoundaries[0] - 23;
+ pPdGainBoundaries[0] = 23;
+ } else {
+ minDelta = 0;
+ }
+
+ if (i == 0) {
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ ss = (int16_t)(0 - (minPwrT4[i] / 2));
+ else
+ ss = 0;
+ } else {
+ ss = (int16_t)((pPdGainBoundaries[i - 1] -
+ (minPwrT4[i] / 2)) -
+ tPdGainOverlap + 1 + minDelta);
+ }
+ vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
+ vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+
+ while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+ tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
+ pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
+ ss++;
+ }
+
+ sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
+ tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
+ (minPwrT4[i] / 2));
+ maxIndex = (tgtIndex < sizeCurrVpdTable) ?
+ tgtIndex : sizeCurrVpdTable;
+
+ while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+ pPDADCValues[k++] = vpdTableI[i][ss++];
+ }
+
+ vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
+ vpdTableI[i][sizeCurrVpdTable - 2]);
+ vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+
+ if (tgtIndex > maxIndex) {
+ while ((ss <= tgtIndex) &&
+ (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+ tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] +
+ (ss - maxIndex + 1) * vpdStep));
+ pPDADCValues[k++] = (u8)((tmpVal > 255) ?
+ 255 : tmpVal);
+ ss++;
+ }
+ }
+ }
+
+ while (i < AR5416_PD_GAINS_IN_MASK) {
+ pPdGainBoundaries[i] = pPdGainBoundaries[i - 1];
+ i++;
+ }
+
+ while (k < AR5416_NUM_PDADC_VALUES) {
+ pPDADCValues[k] = pPDADCValues[k - 1];
+ k++;
+ }
+
+ return;
+}
+
+static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ int16_t *pTxPowerIndexOffset)
+{
+#define SM_PD_GAIN(x) SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##x)
+#define SM_PDGAIN_B(x, y) \
+ SM((gainBoundaries[x]), AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##y)
+
+ struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
+ struct cal_data_per_freq *pRawDataset;
+ u8 *pCalBChans = NULL;
+ u16 pdGainOverlap_t2;
+ static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
+ u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
+ u16 numPiers, i, j;
+ int16_t tMinCalPower;
+ u16 numXpdGain, xpdMask;
+ u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 };
+ u32 reg32, regOffset, regChainOffset;
+ int16_t modalIdx;
+
+ modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
+ xpdMask = pEepData->modalHeader[modalIdx].xpdGain;
+
+ if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_2) {
+ pdGainOverlap_t2 =
+ pEepData->modalHeader[modalIdx].pdGainOverlap;
+ } else {
+ pdGainOverlap_t2 = (u16)(MS(REG_READ(ah, AR_PHY_TPCRG5),
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
+ }
+
+ if (IS_CHAN_2GHZ(chan)) {
+ pCalBChans = pEepData->calFreqPier2G;
+ numPiers = AR5416_NUM_2G_CAL_PIERS;
+ } else {
+ pCalBChans = pEepData->calFreqPier5G;
+ numPiers = AR5416_NUM_5G_CAL_PIERS;
+ }
+
+ if (OLC_FOR_AR9280_20_LATER && IS_CHAN_2GHZ(chan)) {
+ pRawDataset = pEepData->calPierData2G[0];
+ ah->initPDADC = ((struct calDataPerFreqOpLoop *)
+ pRawDataset)->vpdPdg[0][0];
+ }
+
+ numXpdGain = 0;
+
+ for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
+ if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
+ if (numXpdGain >= AR5416_NUM_PD_GAINS)
+ break;
+ xpdGainValues[numXpdGain] =
+ (u16)(AR5416_PD_GAINS_IN_MASK - i);
+ numXpdGain++;
+ }
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN,
+ (numXpdGain - 1) & 0x3);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1,
+ xpdGainValues[0]);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2,
+ xpdGainValues[1]);
+ REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3,
+ xpdGainValues[2]);
+
+ for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ if (AR_SREV_5416_20_OR_LATER(ah) &&
+ (ah->rxchainmask == 5 || ah->txchainmask == 5) &&
+ (i != 0)) {
+ regChainOffset = (i == 1) ? 0x2000 : 0x1000;
+ } else
+ regChainOffset = i * 0x1000;
+
+ if (pEepData->baseEepHeader.txMask & (1 << i)) {
+ if (IS_CHAN_2GHZ(chan))
+ pRawDataset = pEepData->calPierData2G[i];
+ else
+ pRawDataset = pEepData->calPierData5G[i];
+
+
+ if (OLC_FOR_AR9280_20_LATER) {
+ u8 pcdacIdx;
+ u8 txPower;
+
+ ath9k_get_txgain_index(ah, chan,
+ (struct calDataPerFreqOpLoop *)pRawDataset,
+ pCalBChans, numPiers, &txPower, &pcdacIdx);
+ ath9k_olc_get_pdadcs(ah, pcdacIdx,
+ txPower/2, pdadcValues);
+ } else {
+ ath9k_hw_get_def_gain_boundaries_pdadcs(ah,
+ chan, pRawDataset,
+ pCalBChans, numPiers,
+ pdGainOverlap_t2,
+ &tMinCalPower,
+ gainBoundaries,
+ pdadcValues,
+ numXpdGain);
+ }
+
+ if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
+ if (OLC_FOR_AR9280_20_LATER) {
+ REG_WRITE(ah,
+ AR_PHY_TPCRG5 + regChainOffset,
+ SM(0x6,
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
+ SM_PD_GAIN(1) | SM_PD_GAIN(2) |
+ SM_PD_GAIN(3) | SM_PD_GAIN(4));
+ } else {
+ REG_WRITE(ah,
+ AR_PHY_TPCRG5 + regChainOffset,
+ SM(pdGainOverlap_t2,
+ AR_PHY_TPCRG5_PD_GAIN_OVERLAP)|
+ SM_PDGAIN_B(0, 1) |
+ SM_PDGAIN_B(1, 2) |
+ SM_PDGAIN_B(2, 3) |
+ SM_PDGAIN_B(3, 4));
+ }
+ }
+
+ regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;
+ for (j = 0; j < 32; j++) {
+ reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) |
+ ((pdadcValues[4 * j + 1] & 0xFF) << 8) |
+ ((pdadcValues[4 * j + 2] & 0xFF) << 16)|
+ ((pdadcValues[4 * j + 3] & 0xFF) << 24);
+ REG_WRITE(ah, regOffset, reg32);
+
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "PDADC (%d,%4x): %4.4x %8.8x\n",
+ i, regChainOffset, regOffset,
+ reg32);
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "PDADC: Chain %d | PDADC %3d "
+ "Value %3d | PDADC %3d Value %3d | "
+ "PDADC %3d Value %3d | PDADC %3d "
+ "Value %3d |\n",
+ i, 4 * j, pdadcValues[4 * j],
+ 4 * j + 1, pdadcValues[4 * j + 1],
+ 4 * j + 2, pdadcValues[4 * j + 2],
+ 4 * j + 3,
+ pdadcValues[4 * j + 3]);
+
+ regOffset += 4;
+ }
+ }
+ }
+
+ *pTxPowerIndexOffset = 0;
+#undef SM_PD_GAIN
+#undef SM_PDGAIN_B
+}
+
+static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ int16_t *ratesArray,
+ u16 cfgCtl,
+ u16 AntennaReduction,
+ u16 twiceMaxRegulatoryPower,
+ u16 powerLimit)
+{
+#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */
+
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
+ u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+ static const u16 tpScaleReductionTable[5] =
+ { 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+
+ int i;
+ int16_t twiceLargestAntenna;
+ struct cal_ctl_data *rep;
+ struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
+ 0, { 0, 0, 0, 0}
+ };
+ struct cal_target_power_leg targetPowerOfdmExt = {
+ 0, { 0, 0, 0, 0} }, targetPowerCckExt = {
+ 0, { 0, 0, 0, 0 }
+ };
+ struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
+ 0, {0, 0, 0, 0}
+ };
+ u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+ u16 ctlModesFor11a[] =
+ { CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 };
+ u16 ctlModesFor11g[] =
+ { CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
+ CTL_2GHT40
+ };
+ u16 numCtlModes, *pCtlMode, ctlMode, freq;
+ struct chan_centers centers;
+ int tx_chainmask;
+ u16 twiceMinEdgePower;
+
+ tx_chainmask = ah->txchainmask;
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ twiceLargestAntenna = max(
+ pEepData->modalHeader
+ [IS_CHAN_2GHZ(chan)].antennaGainCh[0],
+ pEepData->modalHeader
+ [IS_CHAN_2GHZ(chan)].antennaGainCh[1]);
+
+ twiceLargestAntenna = max((u8)twiceLargestAntenna,
+ pEepData->modalHeader
+ [IS_CHAN_2GHZ(chan)].antennaGainCh[2]);
+
+ twiceLargestAntenna = (int16_t)min(AntennaReduction -
+ twiceLargestAntenna, 0);
+
+ maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+
+ if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX) {
+ maxRegAllowedPower -=
+ (tpScaleReductionTable[(regulatory->tp_scale)] * 2);
+ }
+
+ scaledPower = min(powerLimit, maxRegAllowedPower);
+
+ switch (ar5416_get_ntxchains(tx_chainmask)) {
+ case 1:
+ break;
+ case 2:
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ break;
+ case 3:
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ break;
+ }
+
+ scaledPower = max((u16)0, scaledPower);
+
+ if (IS_CHAN_2GHZ(chan)) {
+ numCtlModes = ARRAY_SIZE(ctlModesFor11g) -
+ SUB_NUM_CTL_MODES_AT_2G_40;
+ pCtlMode = ctlModesFor11g;
+
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPowerCck,
+ AR5416_NUM_2G_CCK_TARGET_POWERS,
+ &targetPowerCck, 4, false);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower2G,
+ AR5416_NUM_2G_20_TARGET_POWERS,
+ &targetPowerOfdm, 4, false);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower2GHT20,
+ AR5416_NUM_2G_20_TARGET_POWERS,
+ &targetPowerHt20, 8, false);
+
+ if (IS_CHAN_HT40(chan)) {
+ numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower2GHT40,
+ AR5416_NUM_2G_40_TARGET_POWERS,
+ &targetPowerHt40, 8, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPowerCck,
+ AR5416_NUM_2G_CCK_TARGET_POWERS,
+ &targetPowerCckExt, 4, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower2G,
+ AR5416_NUM_2G_20_TARGET_POWERS,
+ &targetPowerOfdmExt, 4, true);
+ }
+ } else {
+ numCtlModes = ARRAY_SIZE(ctlModesFor11a) -
+ SUB_NUM_CTL_MODES_AT_5G_40;
+ pCtlMode = ctlModesFor11a;
+
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower5G,
+ AR5416_NUM_5G_20_TARGET_POWERS,
+ &targetPowerOfdm, 4, false);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower5GHT20,
+ AR5416_NUM_5G_20_TARGET_POWERS,
+ &targetPowerHt20, 8, false);
+
+ if (IS_CHAN_HT40(chan)) {
+ numCtlModes = ARRAY_SIZE(ctlModesFor11a);
+ ath9k_hw_get_target_powers(ah, chan,
+ pEepData->calTargetPower5GHT40,
+ AR5416_NUM_5G_40_TARGET_POWERS,
+ &targetPowerHt40, 8, true);
+ ath9k_hw_get_legacy_target_powers(ah, chan,
+ pEepData->calTargetPower5G,
+ AR5416_NUM_5G_20_TARGET_POWERS,
+ &targetPowerOfdmExt, 4, true);
+ }
+ }
+
+ for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+ bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
+ (pCtlMode[ctlMode] == CTL_2GHT40);
+ if (isHt40CtlMode)
+ freq = centers.synth_center;
+ else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+ freq = centers.ext_center;
+ else
+ freq = centers.ctl_center;
+
+ if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
+ ah->eep_ops->get_eeprom_rev(ah) <= 2)
+ twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+
+ for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
+ if ((((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ pEepData->ctlIndex[i]) ||
+ (((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) {
+ rep = &(pEepData->ctlData[i]);
+
+ twiceMinEdgePower = ath9k_hw_get_max_edge_power(freq,
+ rep->ctlEdges[ar5416_get_ntxchains(tx_chainmask) - 1],
+ IS_CHAN_2GHZ(chan), AR5416_NUM_BAND_EDGES);
+
+ if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
+ twiceMaxEdgePower = min(twiceMaxEdgePower,
+ twiceMinEdgePower);
+ } else {
+ twiceMaxEdgePower = twiceMinEdgePower;
+ break;
+ }
+ }
+ }
+
+ minCtlPower = min(twiceMaxEdgePower, scaledPower);
+
+ switch (pCtlMode[ctlMode]) {
+ case CTL_11B:
+ for (i = 0; i < ARRAY_SIZE(targetPowerCck.tPow2x); i++) {
+ targetPowerCck.tPow2x[i] =
+ min((u16)targetPowerCck.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_11A:
+ case CTL_11G:
+ for (i = 0; i < ARRAY_SIZE(targetPowerOfdm.tPow2x); i++) {
+ targetPowerOfdm.tPow2x[i] =
+ min((u16)targetPowerOfdm.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_5GHT20:
+ case CTL_2GHT20:
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++) {
+ targetPowerHt20.tPow2x[i] =
+ min((u16)targetPowerHt20.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ case CTL_11B_EXT:
+ targetPowerCckExt.tPow2x[0] = min((u16)
+ targetPowerCckExt.tPow2x[0],
+ minCtlPower);
+ break;
+ case CTL_11A_EXT:
+ case CTL_11G_EXT:
+ targetPowerOfdmExt.tPow2x[0] = min((u16)
+ targetPowerOfdmExt.tPow2x[0],
+ minCtlPower);
+ break;
+ case CTL_5GHT40:
+ case CTL_2GHT40:
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
+ targetPowerHt40.tPow2x[i] =
+ min((u16)targetPowerHt40.tPow2x[i],
+ minCtlPower);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] =
+ ratesArray[rate18mb] = ratesArray[rate24mb] =
+ targetPowerOfdm.tPow2x[0];
+ ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1];
+ ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2];
+ ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3];
+ ratesArray[rateXr] = targetPowerOfdm.tPow2x[0];
+
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt20.tPow2x); i++)
+ ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i];
+
+ if (IS_CHAN_2GHZ(chan)) {
+ ratesArray[rate1l] = targetPowerCck.tPow2x[0];
+ ratesArray[rate2s] = ratesArray[rate2l] =
+ targetPowerCck.tPow2x[1];
+ ratesArray[rate5_5s] = ratesArray[rate5_5l] =
+ targetPowerCck.tPow2x[2];
+ ratesArray[rate11s] = ratesArray[rate11l] =
+ targetPowerCck.tPow2x[3];
+ }
+ if (IS_CHAN_HT40(chan)) {
+ for (i = 0; i < ARRAY_SIZE(targetPowerHt40.tPow2x); i++) {
+ ratesArray[rateHt40_0 + i] =
+ targetPowerHt40.tPow2x[i];
+ }
+ ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0];
+ ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0];
+ ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0];
+ if (IS_CHAN_2GHZ(chan)) {
+ ratesArray[rateExtCck] =
+ targetPowerCckExt.tPow2x[0];
+ }
+ }
+}
+
+static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ u16 cfgCtl,
+ u8 twiceAntennaReduction,
+ u8 twiceMaxRegulatoryPower,
+ u8 powerLimit)
+{
+#define RT_AR_DELTA(x) (ratesArray[x] - cck_ofdm_delta)
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
+ struct modal_eep_header *pModal =
+ &(pEepData->modalHeader[IS_CHAN_2GHZ(chan)]);
+ int16_t ratesArray[Ar5416RateSize];
+ int16_t txPowerIndexOffset = 0;
+ u8 ht40PowerIncForPdadc = 2;
+ int i, cck_ofdm_delta = 0;
+
+ memset(ratesArray, 0, sizeof(ratesArray));
+
+ if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
+ AR5416_EEP_MINOR_VER_2) {
+ ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
+ }
+
+ ath9k_hw_set_def_power_per_rate_table(ah, chan,
+ &ratesArray[0], cfgCtl,
+ twiceAntennaReduction,
+ twiceMaxRegulatoryPower,
+ powerLimit);
+
+ ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset);
+
+ for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
+ ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]);
+ if (ratesArray[i] > AR5416_MAX_RATE_POWER)
+ ratesArray[i] = AR5416_MAX_RATE_POWER;
+ }
+
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ for (i = 0; i < Ar5416RateSize; i++)
+ ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+ }
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
+ ATH9K_POW_SM(ratesArray[rate18mb], 24)
+ | ATH9K_POW_SM(ratesArray[rate12mb], 16)
+ | ATH9K_POW_SM(ratesArray[rate9mb], 8)
+ | ATH9K_POW_SM(ratesArray[rate6mb], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
+ ATH9K_POW_SM(ratesArray[rate54mb], 24)
+ | ATH9K_POW_SM(ratesArray[rate48mb], 16)
+ | ATH9K_POW_SM(ratesArray[rate36mb], 8)
+ | ATH9K_POW_SM(ratesArray[rate24mb], 0));
+
+ if (IS_CHAN_2GHZ(chan)) {
+ if (OLC_FOR_AR9280_20_LATER) {
+ cck_ofdm_delta = 2;
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+ ATH9K_POW_SM(RT_AR_DELTA(rate2s), 24)
+ | ATH9K_POW_SM(RT_AR_DELTA(rate2l), 16)
+ | ATH9K_POW_SM(ratesArray[rateXr], 8)
+ | ATH9K_POW_SM(RT_AR_DELTA(rate1l), 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+ ATH9K_POW_SM(RT_AR_DELTA(rate11s), 24)
+ | ATH9K_POW_SM(RT_AR_DELTA(rate11l), 16)
+ | ATH9K_POW_SM(RT_AR_DELTA(rate5_5s), 8)
+ | ATH9K_POW_SM(RT_AR_DELTA(rate5_5l), 0));
+ } else {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
+ ATH9K_POW_SM(ratesArray[rate2s], 24)
+ | ATH9K_POW_SM(ratesArray[rate2l], 16)
+ | ATH9K_POW_SM(ratesArray[rateXr], 8)
+ | ATH9K_POW_SM(ratesArray[rate1l], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
+ ATH9K_POW_SM(ratesArray[rate11s], 24)
+ | ATH9K_POW_SM(ratesArray[rate11l], 16)
+ | ATH9K_POW_SM(ratesArray[rate5_5s], 8)
+ | ATH9K_POW_SM(ratesArray[rate5_5l], 0));
+ }
+ }
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
+ ATH9K_POW_SM(ratesArray[rateHt20_3], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt20_2], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt20_1], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt20_0], 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
+ ATH9K_POW_SM(ratesArray[rateHt20_7], 24)
+ | ATH9K_POW_SM(ratesArray[rateHt20_6], 16)
+ | ATH9K_POW_SM(ratesArray[rateHt20_5], 8)
+ | ATH9K_POW_SM(ratesArray[rateHt20_4], 0));
+
+ if (IS_CHAN_HT40(chan)) {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
+ ATH9K_POW_SM(ratesArray[rateHt40_3] +
+ ht40PowerIncForPdadc, 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_2] +
+ ht40PowerIncForPdadc, 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_1] +
+ ht40PowerIncForPdadc, 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_0] +
+ ht40PowerIncForPdadc, 0));
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
+ ATH9K_POW_SM(ratesArray[rateHt40_7] +
+ ht40PowerIncForPdadc, 24)
+ | ATH9K_POW_SM(ratesArray[rateHt40_6] +
+ ht40PowerIncForPdadc, 16)
+ | ATH9K_POW_SM(ratesArray[rateHt40_5] +
+ ht40PowerIncForPdadc, 8)
+ | ATH9K_POW_SM(ratesArray[rateHt40_4] +
+ ht40PowerIncForPdadc, 0));
+ if (OLC_FOR_AR9280_20_LATER) {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
+ ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
+ | ATH9K_POW_SM(RT_AR_DELTA(rateExtCck), 16)
+ | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
+ | ATH9K_POW_SM(RT_AR_DELTA(rateDupCck), 0));
+ } else {
+ REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
+ ATH9K_POW_SM(ratesArray[rateExtOfdm], 24)
+ | ATH9K_POW_SM(ratesArray[rateExtCck], 16)
+ | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
+ | ATH9K_POW_SM(ratesArray[rateDupCck], 0));
+ }
+ }
+
+ REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
+ ATH9K_POW_SM(pModal->pwrDecreaseFor3Chain, 6)
+ | ATH9K_POW_SM(pModal->pwrDecreaseFor2Chain, 0));
+
+ i = rate6mb;
+
+ if (IS_CHAN_HT40(chan))
+ i = rateHt40_0;
+ else if (IS_CHAN_HT20(chan))
+ i = rateHt20_0;
+
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ regulatory->max_power_level =
+ ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
+ else
+ regulatory->max_power_level = ratesArray[i];
+
+ switch(ar5416_get_ntxchains(ah->txchainmask)) {
+ case 1:
+ break;
+ case 2:
+ regulatory->max_power_level += INCREASE_MAXPOW_BY_TWO_CHAIN;
+ break;
+ case 3:
+ regulatory->max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
+ break;
+ default:
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "Invalid chainmask configuration\n");
+ break;
+ }
+}
+
+static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
+ enum ieee80211_band freq_band)
+{
+ struct ar5416_eeprom_def *eep = &ah->eeprom.def;
+ struct modal_eep_header *pModal =
+ &(eep->modalHeader[ATH9K_HAL_FREQ_BAND_2GHZ == freq_band]);
+ struct base_eep_header *pBase = &eep->baseEepHeader;
+ u8 num_ant_config;
+
+ num_ant_config = 1;
+
+ if (pBase->version >= 0x0E0D)
+ if (pModal->useAnt1)
+ num_ant_config += 1;
+
+ return num_ant_config;
+}
+
+static u16 ath9k_hw_def_get_eeprom_antenna_cfg(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct ar5416_eeprom_def *eep = &ah->eeprom.def;
+ struct modal_eep_header *pModal =
+ &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
+
+ return pModal->antCtrlCommon & 0xFFFF;
+}
+
+static u16 ath9k_hw_def_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
+{
+#define EEP_DEF_SPURCHAN \
+ (ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan)
+
+ u16 spur_val = AR_NO_SPUR;
+
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Getting spur idx %d is2Ghz. %d val %x\n",
+ i, is2GHz, ah->config.spurchans[i][is2GHz]);
+
+ switch (ah->config.spurmode) {
+ case SPUR_DISABLE:
+ break;
+ case SPUR_ENABLE_IOCTL:
+ spur_val = ah->config.spurchans[i][is2GHz];
+ DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+ "Getting spur val from new loc. %d\n", spur_val);
+ break;
+ case SPUR_ENABLE_EEPROM:
+ spur_val = EEP_DEF_SPURCHAN;
+ break;
+ }
+
+ return spur_val;
+
+#undef EEP_DEF_SPURCHAN
+}
+
+const struct eeprom_ops eep_def_ops = {
+ .check_eeprom = ath9k_hw_def_check_eeprom,
+ .get_eeprom = ath9k_hw_def_get_eeprom,
+ .fill_eeprom = ath9k_hw_def_fill_eeprom,
+ .get_eeprom_ver = ath9k_hw_def_get_eeprom_ver,
+ .get_eeprom_rev = ath9k_hw_def_get_eeprom_rev,
+ .get_num_ant_config = ath9k_hw_def_get_num_ant_config,
+ .get_eeprom_antenna_cfg = ath9k_hw_def_get_eeprom_antenna_cfg,
+ .set_board_values = ath9k_hw_def_set_board_values,
+ .set_addac = ath9k_hw_def_set_addac,
+ .set_txpower = ath9k_hw_def_set_txpower,
+ .get_spur_channel = ath9k_hw_def_get_spur_channel
+};
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 34935a8..b6c6cca 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,14 +16,11 @@
#include <linux/io.h>
#include <asm/unaligned.h>
+#include <linux/pci.h>
#include "ath9k.h"
#include "initvals.h"
-static int btcoex_enable;
-module_param(btcoex_enable, bool, 0);
-MODULE_PARM_DESC(btcoex_enable, "Enable Bluetooth coexistence support");
-
#define ATH9K_CLOCK_RATE_CCK 22
#define ATH9K_CLOCK_RATE_5GHZ_OFDM 40
#define ATH9K_CLOCK_RATE_2GHZ_OFDM 44
@@ -380,12 +377,15 @@
return "Atheros 9280";
case AR9285_DEVID_PCIE:
return "Atheros 9285";
+ case AR5416_DEVID_AR9287_PCI:
+ case AR5416_DEVID_AR9287_PCIE:
+ return "Atheros 9287";
}
return NULL;
}
-static void ath9k_hw_set_defaults(struct ath_hw *ah)
+static void ath9k_hw_init_config(struct ath_hw *ah)
{
int i;
@@ -404,7 +404,7 @@
ah->config.cck_trig_high = 200;
ah->config.cck_trig_low = 100;
ah->config.enable_ani = 1;
- ah->config.diversity_control = 0;
+ ah->config.diversity_control = ATH9K_ANT_VARIABLE;
ah->config.antenna_switch_swap = 0;
for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
@@ -434,37 +434,24 @@
ah->config.serialize_regmode = SER_REG_MODE_AUTO;
}
-static struct ath_hw *ath9k_hw_newstate(u16 devid, struct ath_softc *sc,
- int *status)
+static void ath9k_hw_init_defaults(struct ath_hw *ah)
{
- struct ath_hw *ah;
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
- ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
- if (ah == NULL) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "Cannot allocate memory for state block\n");
- *status = -ENOMEM;
- return NULL;
- }
+ regulatory->country_code = CTRY_DEFAULT;
+ regulatory->power_limit = MAX_RATE_POWER;
+ regulatory->tp_scale = ATH9K_TP_SCALE_MAX;
- ah->ah_sc = sc;
ah->hw_version.magic = AR5416_MAGIC;
- ah->regulatory.country_code = CTRY_DEFAULT;
- ah->hw_version.devid = devid;
ah->hw_version.subvendorid = 0;
ah->ah_flags = 0;
- if ((devid == AR5416_AR9100_DEVID))
+ if (ah->hw_version.devid == AR5416_AR9100_DEVID)
ah->hw_version.macVersion = AR_SREV_VERSION_9100;
if (!AR_SREV_9100(ah))
ah->ah_flags = AH_USE_EEPROM;
- ah->regulatory.power_limit = MAX_RATE_POWER;
- ah->regulatory.tp_scale = ATH9K_TP_SCALE_MAX;
ah->atim_window = 0;
- ah->diversity_control = ah->config.diversity_control;
- ah->antenna_switch_swap =
- ah->config.antenna_switch_swap;
ah->sta_id1_defaults = AR_STA_ID1_CRPT_MIC_ENABLE;
ah->beacon_interval = 100;
ah->enable_32kHz_clock = DONT_USE_32KHZ;
@@ -475,7 +462,7 @@
ah->gbeacon_rate = 0;
- return ah;
+ ah->power_mode = ATH9K_PM_UNDEFINED;
}
static int ath9k_hw_rfattach(struct ath_hw *ah)
@@ -588,7 +575,7 @@
}
}
-static int ath9k_hw_post_attach(struct ath_hw *ah)
+static int ath9k_hw_post_init(struct ath_hw *ah)
{
int ecode;
@@ -599,7 +586,7 @@
if (ecode != 0)
return ecode;
- ecode = ath9k_hw_eeprom_attach(ah);
+ ecode = ath9k_hw_eeprom_init(ah);
if (ecode != 0)
return ecode;
@@ -612,70 +599,52 @@
if (!AR_SREV_9100(ah)) {
ath9k_hw_ani_setup(ah);
- ath9k_hw_ani_attach(ah);
+ ath9k_hw_ani_init(ah);
}
return 0;
}
-static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
- int *status)
+static bool ath9k_hw_devid_supported(u16 devid)
{
- struct ath_hw *ah;
- int ecode;
- u32 i, j;
-
- ah = ath9k_hw_newstate(devid, sc, status);
- if (ah == NULL)
- return NULL;
-
- ath9k_hw_set_defaults(ah);
-
- if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
- DPRINTF(sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
- ecode = -EIO;
- goto bad;
+ switch (devid) {
+ case AR5416_DEVID_PCI:
+ case AR5416_DEVID_PCIE:
+ case AR5416_AR9100_DEVID:
+ case AR9160_DEVID_PCI:
+ case AR9280_DEVID_PCI:
+ case AR9280_DEVID_PCIE:
+ case AR9285_DEVID_PCIE:
+ case AR5416_DEVID_AR9287_PCI:
+ case AR5416_DEVID_AR9287_PCIE:
+ return true;
+ default:
+ break;
}
+ return false;
+}
- if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
- DPRINTF(sc, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
- ecode = -EIO;
- goto bad;
+static bool ath9k_hw_macversion_supported(u32 macversion)
+{
+ switch (macversion) {
+ case AR_SREV_VERSION_5416_PCI:
+ case AR_SREV_VERSION_5416_PCIE:
+ case AR_SREV_VERSION_9160:
+ case AR_SREV_VERSION_9100:
+ case AR_SREV_VERSION_9280:
+ case AR_SREV_VERSION_9285:
+ case AR_SREV_VERSION_9287:
+ return true;
+ /* Not yet */
+ case AR_SREV_VERSION_9271:
+ default:
+ break;
}
+ return false;
+}
- if (ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
- if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
- (AR_SREV_9280(ah) && !ah->is_pciexpress)) {
- ah->config.serialize_regmode =
- SER_REG_MODE_ON;
- } else {
- ah->config.serialize_regmode =
- SER_REG_MODE_OFF;
- }
- }
-
- DPRINTF(sc, ATH_DBG_RESET, "serialize_regmode is %d\n",
- ah->config.serialize_regmode);
-
- if ((ah->hw_version.macVersion != AR_SREV_VERSION_5416_PCI) &&
- (ah->hw_version.macVersion != AR_SREV_VERSION_5416_PCIE) &&
- (ah->hw_version.macVersion != AR_SREV_VERSION_9160) &&
- (!AR_SREV_9100(ah)) && (!AR_SREV_9280(ah)) && (!AR_SREV_9285(ah))) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "Mac Chip Rev 0x%02x.%x is not supported by "
- "this driver\n", ah->hw_version.macVersion,
- ah->hw_version.macRev);
- ecode = -EOPNOTSUPP;
- goto bad;
- }
-
- if (AR_SREV_9100(ah)) {
- ah->iq_caldata.calData = &iq_cal_multi_sample;
- ah->supp_cals = IQ_MISMATCH_CAL;
- ah->is_pciexpress = false;
- }
- ah->hw_version.phyRev = REG_READ(ah, AR_PHY_CHIP_ID);
-
+static void ath9k_hw_init_cal_settings(struct ath_hw *ah)
+{
if (AR_SREV_9160_10_OR_LATER(ah)) {
if (AR_SREV_9280_10_OR_LATER(ah)) {
ah->iq_caldata.calData = &iq_cal_single_sample;
@@ -696,12 +665,49 @@
}
ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
}
+}
- ah->ani_function = ATH9K_ANI_ALL;
- if (AR_SREV_9280_10_OR_LATER(ah))
- ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
+static void ath9k_hw_init_mode_regs(struct ath_hw *ah)
+{
+ if (AR_SREV_9271(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271_1_0,
+ ARRAY_SIZE(ar9271Modes_9271_1_0), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271_1_0,
+ ARRAY_SIZE(ar9271Common_9271_1_0), 2);
+ return;
+ }
- if (AR_SREV_9285_12_OR_LATER(ah)) {
+ if (AR_SREV_9287_11_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1,
+ ARRAY_SIZE(ar9287Modes_9287_1_1), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1,
+ ARRAY_SIZE(ar9287Common_9287_1_1), 2);
+ if (ah->config.pcie_clock_req)
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_off_L1_9287_1_1,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_1), 2);
+ else
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_always_on_L1_9287_1_1,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_1),
+ 2);
+ } else if (AR_SREV_9287_10_OR_LATER(ah)) {
+ INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_0,
+ ARRAY_SIZE(ar9287Modes_9287_1_0), 6);
+ INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_0,
+ ARRAY_SIZE(ar9287Common_9287_1_0), 2);
+
+ if (ah->config.pcie_clock_req)
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_off_L1_9287_1_0,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_0), 2);
+ else
+ INIT_INI_ARRAY(&ah->iniPcieSerdes,
+ ar9287PciePhy_clkreq_always_on_L1_9287_1_0,
+ ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_0),
+ 2);
+ } else if (AR_SREV_9285_12_OR_LATER(ah)) {
+
INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2,
ARRAY_SIZE(ar9285Modes_9285_1_2), 6);
@@ -832,17 +838,32 @@
INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac,
ARRAY_SIZE(ar5416Addac), 2);
}
+}
- if (ah->is_pciexpress)
- ath9k_hw_configpcipowersave(ah, 0);
- else
- ath9k_hw_disablepcie(ah);
+static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
+{
+ if (AR_SREV_9287_11(ah))
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9287Modes_rx_gain_9287_1_1,
+ ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_1), 6);
+ else if (AR_SREV_9287_10(ah))
+ INIT_INI_ARRAY(&ah->iniModesRxGain,
+ ar9287Modes_rx_gain_9287_1_0,
+ ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_0), 6);
+ else if (AR_SREV_9280_20(ah))
+ ath9k_hw_init_rxgain_ini(ah);
- ecode = ath9k_hw_post_attach(ah);
- if (ecode != 0)
- goto bad;
-
- if (AR_SREV_9285_12_OR_LATER(ah)) {
+ if (AR_SREV_9287_11(ah)) {
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9287Modes_tx_gain_9287_1_1,
+ ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_1), 6);
+ } else if (AR_SREV_9287_10(ah)) {
+ INIT_INI_ARRAY(&ah->iniModesTxGain,
+ ar9287Modes_tx_gain_9287_1_0,
+ ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_0), 6);
+ } else if (AR_SREV_9280_20(ah)) {
+ ath9k_hw_init_txgain_ini(ah);
+ } else if (AR_SREV_9285_12_OR_LATER(ah)) {
u32 txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE);
/* txgain table */
@@ -857,16 +878,11 @@
}
}
+}
- /* rxgain table */
- if (AR_SREV_9280_20(ah))
- ath9k_hw_init_rxgain_ini(ah);
-
- /* txgain table */
- if (AR_SREV_9280_20(ah))
- ath9k_hw_init_txgain_ini(ah);
-
- ath9k_hw_fill_cap_info(ah);
+static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah)
+{
+ u32 i, j;
if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
@@ -885,29 +901,97 @@
}
}
}
+}
- ecode = ath9k_hw_init_macaddr(ah);
- if (ecode != 0) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "Failed to initialize MAC address\n");
- goto bad;
+int ath9k_hw_init(struct ath_hw *ah)
+{
+ int r = 0;
+
+ if (!ath9k_hw_devid_supported(ah->hw_version.devid))
+ return -EOPNOTSUPP;
+
+ ath9k_hw_init_defaults(ah);
+ ath9k_hw_init_config(ah);
+
+ if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
+ return -EIO;
}
- if (AR_SREV_9285(ah))
+ if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
+ return -EIO;
+ }
+
+ if (ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
+ if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
+ (AR_SREV_9280(ah) && !ah->is_pciexpress)) {
+ ah->config.serialize_regmode =
+ SER_REG_MODE_ON;
+ } else {
+ ah->config.serialize_regmode =
+ SER_REG_MODE_OFF;
+ }
+ }
+
+ DPRINTF(ah->ah_sc, ATH_DBG_RESET, "serialize_regmode is %d\n",
+ ah->config.serialize_regmode);
+
+ if (!ath9k_hw_macversion_supported(ah->hw_version.macVersion)) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Mac Chip Rev 0x%02x.%x is not supported by "
+ "this driver\n", ah->hw_version.macVersion,
+ ah->hw_version.macRev);
+ return -EOPNOTSUPP;
+ }
+
+ if (AR_SREV_9100(ah)) {
+ ah->iq_caldata.calData = &iq_cal_multi_sample;
+ ah->supp_cals = IQ_MISMATCH_CAL;
+ ah->is_pciexpress = false;
+ }
+
+ if (AR_SREV_9271(ah))
+ ah->is_pciexpress = false;
+
+ ah->hw_version.phyRev = REG_READ(ah, AR_PHY_CHIP_ID);
+
+ ath9k_hw_init_cal_settings(ah);
+
+ ah->ani_function = ATH9K_ANI_ALL;
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
+
+ ath9k_hw_init_mode_regs(ah);
+
+ if (ah->is_pciexpress)
+ ath9k_hw_configpcipowersave(ah, 0);
+ else
+ ath9k_hw_disablepcie(ah);
+
+ r = ath9k_hw_post_init(ah);
+ if (r)
+ return r;
+
+ ath9k_hw_init_mode_gain_regs(ah);
+ ath9k_hw_fill_cap_info(ah);
+ ath9k_hw_init_11a_eeprom_fix(ah);
+
+ r = ath9k_hw_init_macaddr(ah);
+ if (r) {
+ DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
+ "Failed to initialize MAC address\n");
+ return r;
+ }
+
+ if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
ah->tx_trig_level = (AR_FTRIG_256B >> AR_FTRIG_S);
else
ah->tx_trig_level = (AR_FTRIG_512B >> AR_FTRIG_S);
ath9k_init_nfcal_hist_buffer(ah);
- return ah;
-bad:
- if (ah)
- ath9k_hw_detach(ah);
- if (status)
- *status = ecode;
-
- return NULL;
+ return 0;
}
static void ath9k_hw_init_bb(struct ath_hw *ah,
@@ -1146,33 +1230,12 @@
void ath9k_hw_detach(struct ath_hw *ah)
{
if (!AR_SREV_9100(ah))
- ath9k_hw_ani_detach(ah);
+ ath9k_hw_ani_disable(ah);
- ath9k_hw_rfdetach(ah);
+ ath9k_hw_rf_free(ah);
ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
kfree(ah);
-}
-
-struct ath_hw *ath9k_hw_attach(u16 devid, struct ath_softc *sc, int *error)
-{
- struct ath_hw *ah = NULL;
-
- switch (devid) {
- case AR5416_DEVID_PCI:
- case AR5416_DEVID_PCIE:
- case AR5416_AR9100_DEVID:
- case AR9160_DEVID_PCI:
- case AR9280_DEVID_PCI:
- case AR9280_DEVID_PCIE:
- case AR9285_DEVID_PCIE:
- ah = ath9k_hw_do_attach(devid, sc, error);
- break;
- default:
- *error = -ENXIO;
- break;
- }
-
- return ah;
+ ah = NULL;
}
/*******/
@@ -1182,6 +1245,27 @@
static void ath9k_hw_override_ini(struct ath_hw *ah,
struct ath9k_channel *chan)
{
+ u32 val;
+
+ if (AR_SREV_9271(ah)) {
+ /*
+ * Enable spectral scan to solution for issues with stuck
+ * beacons on AR9271 1.0. The beacon stuck issue is not seeon on
+ * AR9271 1.1
+ */
+ if (AR_SREV_9271_10(ah)) {
+ val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | AR_PHY_SPECTRAL_SCAN_ENABLE;
+ REG_WRITE(ah, AR_PHY_SPECTRAL_SCAN, val);
+ }
+ else if (AR_SREV_9271_11(ah))
+ /*
+ * change AR_PHY_RF_CTL3 setting to fix MAC issue
+ * present on AR9271 1.1
+ */
+ REG_WRITE(ah, AR_PHY_RF_CTL3, 0x3a020001);
+ return;
+ }
+
/*
* Set the RX_ABORT and RX_DIS and clear if off only after
* RXE is set for MAC. This prevents frames with corrupted
@@ -1193,7 +1277,10 @@
if (!AR_SREV_5416_20_OR_LATER(ah) ||
AR_SREV_9280_10_OR_LATER(ah))
return;
-
+ /*
+ * Disable BB clock gating
+ * Necessary to avoid issues on AR5416 2.0
+ */
REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
}
@@ -1245,11 +1332,21 @@
{
u32 i;
- for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++)
- ah->originalGain[i] =
- MS(REG_READ(ah, AR_PHY_TX_GAIN_TBL1 + i * 4),
- AR_PHY_TX_GAIN);
- ah->PDADCdelta = 0;
+ if (OLC_FOR_AR9287_10_LATER) {
+ REG_SET_BIT(ah, AR_PHY_TX_PWRCTRL9,
+ AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL);
+ ath9k_hw_analog_shift_rmw(ah, AR9287_AN_TXPC0,
+ AR9287_AN_TXPC0_TXPCMODE,
+ AR9287_AN_TXPC0_TXPCMODE_S,
+ AR9287_AN_TXPC0_TXPCMODE_TEMPSENSE);
+ udelay(100);
+ } else {
+ for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++)
+ ah->originalGain[i] =
+ MS(REG_READ(ah, AR_PHY_TX_GAIN_TBL1 + i * 4),
+ AR_PHY_TX_GAIN);
+ ah->PDADCdelta = 0;
+ }
}
static u32 ath9k_regd_get_ctl(struct ath_regulatory *reg,
@@ -1271,6 +1368,7 @@
struct ath9k_channel *chan,
enum ath9k_ht_macmode macmode)
{
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
int i, regWrites = 0;
struct ieee80211_channel *channel = chan->chan;
u32 modesIndex, freqIndex;
@@ -1341,10 +1439,11 @@
DO_DELAY(regWrites);
}
- if (AR_SREV_9280(ah))
+ if (AR_SREV_9280(ah) || AR_SREV_9287_10_OR_LATER(ah))
REG_WRITE_ARRAY(&ah->iniModesRxGain, modesIndex, regWrites);
- if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah))
+ if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah) ||
+ AR_SREV_9287_10_OR_LATER(ah))
REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
for (i = 0; i < ah->iniCommon.ia_rows; i++) {
@@ -1376,11 +1475,11 @@
ath9k_olc_init(ah);
ah->eep_ops->set_txpower(ah, chan,
- ath9k_regd_get_ctl(&ah->regulatory, chan),
+ ath9k_regd_get_ctl(regulatory, chan),
channel->max_antenna_gain * 2,
channel->max_power * 2,
min((u32) MAX_RATE_POWER,
- (u32) ah->regulatory.power_limit));
+ (u32) regulatory->power_limit));
if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
@@ -1424,23 +1523,48 @@
{
u32 regval;
+ /*
+ * set AHB_MODE not to do cacheline prefetches
+ */
regval = REG_READ(ah, AR_AHB_MODE);
REG_WRITE(ah, AR_AHB_MODE, regval | AR_AHB_PREFETCH_RD_EN);
+ /*
+ * let mac dma reads be in 128 byte chunks
+ */
regval = REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK;
REG_WRITE(ah, AR_TXCFG, regval | AR_TXCFG_DMASZ_128B);
+ /*
+ * Restore TX Trigger Level to its pre-reset value.
+ * The initial value depends on whether aggregation is enabled, and is
+ * adjusted whenever underruns are detected.
+ */
REG_RMW_FIELD(ah, AR_TXCFG, AR_FTRIG, ah->tx_trig_level);
+ /*
+ * let mac dma writes be in 128 byte chunks
+ */
regval = REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK;
REG_WRITE(ah, AR_RXCFG, regval | AR_RXCFG_DMASZ_128B);
+ /*
+ * Setup receive FIFO threshold to hold off TX activities
+ */
REG_WRITE(ah, AR_RXFIFO_CFG, 0x200);
+ /*
+ * reduce the number of usable entries in PCU TXBUF to avoid
+ * wrap around issues.
+ */
if (AR_SREV_9285(ah)) {
+ /* For AR9285 the number of Fifos are reduced to half.
+ * So set the usable tx buf size also to half to
+ * avoid data/delimiter underruns
+ */
REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
- } else {
+ } else if (!AR_SREV_9271(ah)) {
REG_WRITE(ah, AR_PCU_TXBUF_CTRL,
AR_PCU_TXBUF_CTRL_USABLE_SIZE);
}
@@ -1585,8 +1709,15 @@
REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN |
AR_RTC_FORCE_WAKE_ON_INT);
+ if (!AR_SREV_9100(ah))
+ REG_WRITE(ah, AR_RC, AR_RC_AHB);
+
REG_WRITE(ah, AR_RTC_RESET, 0);
udelay(2);
+
+ if (!AR_SREV_9100(ah))
+ REG_WRITE(ah, AR_RC, 0);
+
REG_WRITE(ah, AR_RTC_RESET, 1);
if (!ath9k_hw_wait(ah,
@@ -1673,6 +1804,7 @@
struct ath9k_channel *chan,
enum ath9k_ht_macmode macmode)
{
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
struct ieee80211_channel *channel = chan->chan;
u32 synthDelay, qnum;
@@ -1705,11 +1837,11 @@
}
ah->eep_ops->set_txpower(ah, chan,
- ath9k_regd_get_ctl(&ah->regulatory, chan),
+ ath9k_regd_get_ctl(regulatory, chan),
channel->max_antenna_gain * 2,
channel->max_power * 2,
min((u32) MAX_RATE_POWER,
- (u32) ah->regulatory.power_limit));
+ (u32) regulatory->power_limit));
synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
if (IS_CHAN_B(chan))
@@ -2246,14 +2378,39 @@
ath9k_hw_mark_phy_inactive(ah);
+ if (AR_SREV_9271(ah) && ah->htc_reset_init) {
+ REG_WRITE(ah,
+ AR9271_RESET_POWER_DOWN_CONTROL,
+ AR9271_RADIO_RF_RST);
+ udelay(50);
+ }
+
if (!ath9k_hw_chip_reset(ah, chan)) {
DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Chip reset failed\n");
return -EINVAL;
}
+ if (AR_SREV_9271(ah) && ah->htc_reset_init) {
+ ah->htc_reset_init = false;
+ REG_WRITE(ah,
+ AR9271_RESET_POWER_DOWN_CONTROL,
+ AR9271_GATE_MAC_CTL);
+ udelay(50);
+ }
+
if (AR_SREV_9280_10_OR_LATER(ah))
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+ if (AR_SREV_9287_12_OR_LATER(ah)) {
+ /* Enable ASYNC FIFO */
+ REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+ AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
+ REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
+ REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+ AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
+ REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+ AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
+ }
r = ath9k_hw_process_ini(ah, chan, sc->tx_chan_width);
if (r)
return r;
@@ -2330,6 +2487,27 @@
ath9k_hw_init_user_settings(ah);
+ if (AR_SREV_9287_12_OR_LATER(ah)) {
+ REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
+ AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR);
+ REG_WRITE(ah, AR_D_GBL_IFS_SLOT,
+ AR_D_GBL_IFS_SLOT_ASYNC_FIFO_DUR);
+ REG_WRITE(ah, AR_D_GBL_IFS_EIFS,
+ AR_D_GBL_IFS_EIFS_ASYNC_FIFO_DUR);
+
+ REG_WRITE(ah, AR_TIME_OUT, AR_TIME_OUT_ACK_CTS_ASYNC_FIFO_DUR);
+ REG_WRITE(ah, AR_USEC, AR_USEC_ASYNC_FIFO_DUR);
+
+ REG_SET_BIT(ah, AR_MAC_PCU_LOGIC_ANALYZER,
+ AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768);
+ REG_RMW_FIELD(ah, AR_AHB_MODE, AR_AHB_CUSTOM_BURST_EN,
+ AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL);
+ }
+ if (AR_SREV_9287_12_OR_LATER(ah)) {
+ REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
+ AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
+ }
+
REG_WRITE(ah, AR_STA_ID1,
REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM);
@@ -2345,7 +2523,7 @@
ath9k_hw_init_bb(ah, chan);
if (!ath9k_hw_init_cal(ah, chan))
- return -EIO;;
+ return -EIO;
rx_chainmask = ah->rxchainmask;
if ((rx_chainmask == 0x5) || (rx_chainmask == 0x3)) {
@@ -2355,6 +2533,9 @@
REG_WRITE(ah, AR_CFG_LED, saveLedState | AR_CFG_SCLK_32KHZ);
+ /*
+ * For big endian systems turn on swapping for descriptors
+ */
if (AR_SREV_9100(ah)) {
u32 mask;
mask = REG_READ(ah, AR_CFG);
@@ -2369,11 +2550,18 @@
"Setting CFG 0x%x\n", REG_READ(ah, AR_CFG));
}
} else {
+ /* Configure AR9271 target WLAN */
+ if (AR_SREV_9271(ah))
+ REG_WRITE(ah, AR_CFG, AR_CFG_SWRB | AR_CFG_SWTB);
#ifdef __BIG_ENDIAN
- REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
+ else
+ REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
#endif
}
+ if (ah->ah_sc->sc_flags & SC_OP_BTCOEX_ENABLED)
+ ath9k_hw_btcoex_enable(ah);
+
return 0;
}
@@ -2412,9 +2600,6 @@
}
- if (ah->curchan == NULL)
- return true;
-
return true;
}
@@ -2728,7 +2913,8 @@
return true;
}
-bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
+static bool ath9k_hw_setpower_nolock(struct ath_hw *ah,
+ enum ath9k_power_mode mode)
{
int status = true, setChip = true;
static const char *modes[] = {
@@ -2738,6 +2924,9 @@
"UNDEFINED"
};
+ if (ah->power_mode == mode)
+ return status;
+
DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s -> %s\n",
modes[ah->power_mode], modes[mode]);
@@ -2762,6 +2951,51 @@
return status;
}
+bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
+{
+ unsigned long flags;
+ bool ret;
+
+ spin_lock_irqsave(&ah->ah_sc->sc_pm_lock, flags);
+ ret = ath9k_hw_setpower_nolock(ah, mode);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_pm_lock, flags);
+
+ return ret;
+}
+
+void ath9k_ps_wakeup(struct ath_softc *sc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+ if (++sc->ps_usecount != 1)
+ goto unlock;
+
+ ath9k_hw_setpower_nolock(sc->sc_ah, ATH9K_PM_AWAKE);
+
+ unlock:
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+}
+
+void ath9k_ps_restore(struct ath_softc *sc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+ if (--sc->ps_usecount != 0)
+ goto unlock;
+
+ if (sc->ps_enabled &&
+ !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+ SC_OP_WAIT_FOR_CAB |
+ SC_OP_WAIT_FOR_PSPOLL_DATA |
+ SC_OP_WAIT_FOR_TX_ACK)))
+ ath9k_hw_setpower_nolock(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
+
+ unlock:
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+}
+
/*
* Helper for ASPM support.
*
@@ -2790,7 +3024,7 @@
/*
* AR9280 2.0 or later chips use SerDes values from the
* initvals.h initialized depending on chipset during
- * ath9k_hw_do_attach()
+ * ath9k_hw_init()
*/
for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
@@ -2851,7 +3085,7 @@
if (ah->config.pcie_waen) {
REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
} else {
- if (AR_SREV_9285(ah))
+ if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah))
REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT);
/*
* On AR9280 chips bit 22 of 0x4004 needs to be set to
@@ -2985,6 +3219,23 @@
if (AR_SREV_9100(ah))
return true;
+ if (isr & AR_ISR_GENTMR) {
+ u32 s5_s;
+
+ s5_s = REG_READ(ah, AR_ISR_S5_S);
+ if (isr & AR_ISR_GENTMR) {
+ ah->intr_gen_timer_trigger =
+ MS(s5_s, AR_ISR_S5_GENTIMER_TRIG);
+
+ ah->intr_gen_timer_thresh =
+ MS(s5_s, AR_ISR_S5_GENTIMER_THRESH);
+
+ if (ah->intr_gen_timer_trigger)
+ *masked |= ATH9K_INT_GENTIMER;
+
+ }
+ }
+
if (sync_cause) {
fatal_int =
(sync_cause &
@@ -3021,11 +3272,6 @@
return true;
}
-enum ath9k_int ath9k_hw_intrget(struct ath_hw *ah)
-{
- return ah->mask_reg;
-}
-
enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
{
u32 omask = ah->mask_reg;
@@ -3263,27 +3509,30 @@
void ath9k_hw_fill_cap_info(struct ath_hw *ah)
{
struct ath9k_hw_capabilities *pCap = &ah->caps;
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+
u16 capField = 0, eeval;
eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_0);
- ah->regulatory.current_rd = eeval;
+ regulatory->current_rd = eeval;
eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_1);
if (AR_SREV_9285_10_OR_LATER(ah))
eeval |= AR9285_RDEXT_DEFAULT;
- ah->regulatory.current_rd_ext = eeval;
+ regulatory->current_rd_ext = eeval;
capField = ah->eep_ops->get_eeprom(ah, EEP_OP_CAP);
if (ah->opmode != NL80211_IFTYPE_AP &&
ah->hw_version.subvendorid == AR_SUBVENDOR_ID_NEW_A) {
- if (ah->regulatory.current_rd == 0x64 ||
- ah->regulatory.current_rd == 0x65)
- ah->regulatory.current_rd += 5;
- else if (ah->regulatory.current_rd == 0x41)
- ah->regulatory.current_rd = 0x43;
+ if (regulatory->current_rd == 0x64 ||
+ regulatory->current_rd == 0x65)
+ regulatory->current_rd += 5;
+ else if (regulatory->current_rd == 0x41)
+ regulatory->current_rd = 0x43;
DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
- "regdomain mapped to 0x%x\n", ah->regulatory.current_rd);
+ "regdomain mapped to 0x%x\n", regulatory->current_rd);
}
eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
@@ -3305,7 +3554,6 @@
}
if (eeval & AR5416_OPFLAGS_11G) {
- set_bit(ATH9K_MODE_11B, pCap->wireless_modes);
set_bit(ATH9K_MODE_11G, pCap->wireless_modes);
if (ah->config.ht_enable) {
if (!(eeval & AR5416_OPFLAGS_N_2G_HT20))
@@ -3321,10 +3569,17 @@
}
pCap->tx_chainmask = ah->eep_ops->get_eeprom(ah, EEP_TX_MASK);
+ /*
+ * For AR9271 we will temporarilly uses the rx chainmax as read from
+ * the EEPROM.
+ */
if ((ah->hw_version.devid == AR5416_DEVID_PCI) &&
- !(eeval & AR5416_OPFLAGS_11A))
+ !(eeval & AR5416_OPFLAGS_11A) &&
+ !(AR_SREV_9271(ah)))
+ /* CB71: GPIO 0 is pulled down to indicate 3 rx chains */
pCap->rx_chainmask = ath9k_hw_gpio_get(ah, 0) ? 0x5 : 0x7;
else
+ /* Use rx_chainmask from EEPROM. */
pCap->rx_chainmask = ah->eep_ops->get_eeprom(ah, EEP_RX_MASK);
if (!(AR_SREV_9280(ah) && (ah->hw_version.macRev == 0)))
@@ -3412,7 +3667,7 @@
else
pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
- if (ah->regulatory.current_rd_ext & (1 << REG_EXT_JAPAN_MIDBAND)) {
+ if (regulatory->current_rd_ext & (1 << REG_EXT_JAPAN_MIDBAND)) {
pCap->reg_cap =
AR_EEPROM_EEREGCAP_EN_KK_NEW_11A |
AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN |
@@ -3431,16 +3686,26 @@
pCap->num_antcfg_2ghz =
ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_2GHZ);
- if (AR_SREV_9280_10_OR_LATER(ah) && btcoex_enable) {
- pCap->hw_caps |= ATH9K_HW_CAP_BT_COEX;
- ah->btactive_gpio = 6;
- ah->wlanactive_gpio = 5;
+ if (AR_SREV_9280_10_OR_LATER(ah) &&
+ ath_btcoex_supported(ah->hw_version.subsysid)) {
+ btcoex_info->btactive_gpio = ATH_BTACTIVE_GPIO;
+ btcoex_info->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
+
+ if (AR_SREV_9285(ah)) {
+ btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_3WIRE;
+ btcoex_info->btpriority_gpio = ATH_BTPRIORITY_GPIO;
+ } else {
+ btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_2WIRE;
+ }
+ } else {
+ btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_NONE;
}
}
bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
u32 capability, u32 *result)
{
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
switch (type) {
case ATH9K_CAP_CIPHER:
switch (capability) {
@@ -3489,13 +3754,13 @@
case 0:
return 0;
case 1:
- *result = ah->regulatory.power_limit;
+ *result = regulatory->power_limit;
return 0;
case 2:
- *result = ah->regulatory.max_power_level;
+ *result = regulatory->max_power_level;
return 0;
case 3:
- *result = ah->regulatory.tp_scale;
+ *result = regulatory->tp_scale;
return 0;
}
return false;
@@ -3595,7 +3860,9 @@
if (gpio >= ah->caps.num_gpio_pins)
return 0xffffffff;
- if (AR_SREV_9285_10_OR_LATER(ah))
+ if (AR_SREV_9287_10_OR_LATER(ah))
+ return MS_REG_READ(AR9287, gpio) != 0;
+ else if (AR_SREV_9285_10_OR_LATER(ah))
return MS_REG_READ(AR9285, gpio) != 0;
else if (AR_SREV_9280_10_OR_LATER(ah))
return MS_REG_READ(AR928X, gpio) != 0;
@@ -3673,7 +3940,7 @@
break;
}
} else {
- ah->diversity_control = settings;
+ ah->config.diversity_control = settings;
}
return true;
@@ -3700,7 +3967,8 @@
{
u32 phybits;
- REG_WRITE(ah, AR_RX_FILTER, (bits & 0xffff) | AR_RX_COMPR_BAR);
+ REG_WRITE(ah, AR_RX_FILTER, bits);
+
phybits = 0;
if (bits & ATH9K_RX_FILTER_PHYRADAR)
phybits |= AR_PHY_ERR_RADAR;
@@ -3731,17 +3999,18 @@
void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
{
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
struct ath9k_channel *chan = ah->curchan;
struct ieee80211_channel *channel = chan->chan;
- ah->regulatory.power_limit = min(limit, (u32) MAX_RATE_POWER);
+ regulatory->power_limit = min(limit, (u32) MAX_RATE_POWER);
ah->eep_ops->set_txpower(ah, chan,
- ath9k_regd_get_ctl(&ah->regulatory, chan),
+ ath9k_regd_get_ctl(regulatory, chan),
channel->max_antenna_gain * 2,
channel->max_power * 2,
min((u32) MAX_RATE_POWER,
- (u32) ah->regulatory.power_limit));
+ (u32) regulatory->power_limit));
}
void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac)
@@ -3791,29 +4060,22 @@
void ath9k_hw_reset_tsf(struct ath_hw *ah)
{
- int count;
+ ath9k_ps_wakeup(ah->ah_sc);
+ if (!ath9k_hw_wait(ah, AR_SLP32_MODE, AR_SLP32_TSF_WRITE_STATUS, 0,
+ AH_TSF_WRITE_TIMEOUT))
+ DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+ "AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
- count = 0;
- while (REG_READ(ah, AR_SLP32_MODE) & AR_SLP32_TSF_WRITE_STATUS) {
- count++;
- if (count > 10) {
- DPRINTF(ah->ah_sc, ATH_DBG_RESET,
- "AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
- break;
- }
- udelay(10);
- }
REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE);
+ ath9k_ps_restore(ah->ah_sc);
}
-bool ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting)
+void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting)
{
if (setting)
ah->misc_mode |= AR_PCU_TX_ADD_TSF;
else
ah->misc_mode &= ~AR_PCU_TX_ADD_TSF;
-
- return true;
}
bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
@@ -3842,29 +4104,210 @@
REG_WRITE(ah, AR_2040_MODE, macmode);
}
-/***************************/
-/* Bluetooth Coexistence */
-/***************************/
+/* HW Generic timers configuration */
-void ath9k_hw_btcoex_enable(struct ath_hw *ah)
+static const struct ath_gen_timer_configuration gen_tmr_configuration[] =
{
- /* connect bt_active to baseband */
- REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
- (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
- AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP_TIMER, AR_NDP_PERIOD, AR_TIMER_MODE, 0x0080},
+ {AR_NEXT_NDP2_TIMER, AR_NDP2_PERIOD, AR_NDP2_TIMER_MODE, 0x0001},
+ {AR_NEXT_NDP2_TIMER + 1*4, AR_NDP2_PERIOD + 1*4,
+ AR_NDP2_TIMER_MODE, 0x0002},
+ {AR_NEXT_NDP2_TIMER + 2*4, AR_NDP2_PERIOD + 2*4,
+ AR_NDP2_TIMER_MODE, 0x0004},
+ {AR_NEXT_NDP2_TIMER + 3*4, AR_NDP2_PERIOD + 3*4,
+ AR_NDP2_TIMER_MODE, 0x0008},
+ {AR_NEXT_NDP2_TIMER + 4*4, AR_NDP2_PERIOD + 4*4,
+ AR_NDP2_TIMER_MODE, 0x0010},
+ {AR_NEXT_NDP2_TIMER + 5*4, AR_NDP2_PERIOD + 5*4,
+ AR_NDP2_TIMER_MODE, 0x0020},
+ {AR_NEXT_NDP2_TIMER + 6*4, AR_NDP2_PERIOD + 6*4,
+ AR_NDP2_TIMER_MODE, 0x0040},
+ {AR_NEXT_NDP2_TIMER + 7*4, AR_NDP2_PERIOD + 7*4,
+ AR_NDP2_TIMER_MODE, 0x0080}
+};
- REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
- AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
+/* HW generic timer primitives */
- /* Set input mux for bt_active to gpio pin */
- REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
- AR_GPIO_INPUT_MUX1_BT_ACTIVE,
- ah->btactive_gpio);
+/* compute and clear index of rightmost 1 */
+static u32 rightmost_index(struct ath_gen_timer_table *timer_table, u32 *mask)
+{
+ u32 b;
- /* Configure the desired gpio port for input */
- ath9k_hw_cfg_gpio_input(ah, ah->btactive_gpio);
+ b = *mask;
+ b &= (0-b);
+ *mask &= ~b;
+ b *= debruijn32;
+ b >>= 27;
- /* Configure the desired GPIO port for TX_FRAME output */
- ath9k_hw_cfg_output(ah, ah->wlanactive_gpio,
- AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
+ return timer_table->gen_timer_index[b];
+}
+
+u32 ath9k_hw_gettsf32(struct ath_hw *ah)
+{
+ return REG_READ(ah, AR_TSF_L32);
+}
+
+struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
+ void (*trigger)(void *),
+ void (*overflow)(void *),
+ void *arg,
+ u8 timer_index)
+{
+ struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+ struct ath_gen_timer *timer;
+
+ timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL);
+
+ if (timer == NULL) {
+ printk(KERN_DEBUG "Failed to allocate memory"
+ "for hw timer[%d]\n", timer_index);
+ return NULL;
+ }
+
+ /* allocate a hardware generic timer slot */
+ timer_table->timers[timer_index] = timer;
+ timer->index = timer_index;
+ timer->trigger = trigger;
+ timer->overflow = overflow;
+ timer->arg = arg;
+
+ return timer;
+}
+
+void ath_gen_timer_start(struct ath_hw *ah,
+ struct ath_gen_timer *timer,
+ u32 timer_next, u32 timer_period)
+{
+ struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+ u32 tsf;
+
+ BUG_ON(!timer_period);
+
+ set_bit(timer->index, &timer_table->timer_mask.timer_bits);
+
+ tsf = ath9k_hw_gettsf32(ah);
+
+ DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER, "curent tsf %x period %x"
+ "timer_next %x\n", tsf, timer_period, timer_next);
+
+ /*
+ * Pull timer_next forward if the current TSF already passed it
+ * because of software latency
+ */
+ if (timer_next < tsf)
+ timer_next = tsf + timer_period;
+
+ /*
+ * Program generic timer registers
+ */
+ REG_WRITE(ah, gen_tmr_configuration[timer->index].next_addr,
+ timer_next);
+ REG_WRITE(ah, gen_tmr_configuration[timer->index].period_addr,
+ timer_period);
+ REG_SET_BIT(ah, gen_tmr_configuration[timer->index].mode_addr,
+ gen_tmr_configuration[timer->index].mode_mask);
+
+ /* Enable both trigger and thresh interrupt masks */
+ REG_SET_BIT(ah, AR_IMR_S5,
+ (SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_THRESH) |
+ SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
+
+ if ((ah->ah_sc->imask & ATH9K_INT_GENTIMER) == 0) {
+ ath9k_hw_set_interrupts(ah, 0);
+ ah->ah_sc->imask |= ATH9K_INT_GENTIMER;
+ ath9k_hw_set_interrupts(ah, ah->ah_sc->imask);
+ }
+}
+
+void ath_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
+{
+ struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+
+ if ((timer->index < AR_FIRST_NDP_TIMER) ||
+ (timer->index >= ATH_MAX_GEN_TIMER)) {
+ return;
+ }
+
+ /* Clear generic timer enable bits. */
+ REG_CLR_BIT(ah, gen_tmr_configuration[timer->index].mode_addr,
+ gen_tmr_configuration[timer->index].mode_mask);
+
+ /* Disable both trigger and thresh interrupt masks */
+ REG_CLR_BIT(ah, AR_IMR_S5,
+ (SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_THRESH) |
+ SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
+
+ clear_bit(timer->index, &timer_table->timer_mask.timer_bits);
+
+ /* if no timer is enabled, turn off interrupt mask */
+ if (timer_table->timer_mask.val == 0) {
+ ath9k_hw_set_interrupts(ah, 0);
+ ah->ah_sc->imask &= ~ATH9K_INT_GENTIMER;
+ ath9k_hw_set_interrupts(ah, ah->ah_sc->imask);
+ }
+}
+
+void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer)
+{
+ struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+
+ /* free the hardware generic timer slot */
+ timer_table->timers[timer->index] = NULL;
+ kfree(timer);
+}
+
+/*
+ * Generic Timer Interrupts handling
+ */
+void ath_gen_timer_isr(struct ath_hw *ah)
+{
+ struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+ struct ath_gen_timer *timer;
+ u32 trigger_mask, thresh_mask, index;
+
+ /* get hardware generic timer interrupt status */
+ trigger_mask = ah->intr_gen_timer_trigger;
+ thresh_mask = ah->intr_gen_timer_thresh;
+ trigger_mask &= timer_table->timer_mask.val;
+ thresh_mask &= timer_table->timer_mask.val;
+
+ trigger_mask &= ~thresh_mask;
+
+ while (thresh_mask) {
+ index = rightmost_index(timer_table, &thresh_mask);
+ timer = timer_table->timers[index];
+ BUG_ON(!timer);
+ DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER,
+ "TSF overflow for Gen timer %d\n", index);
+ timer->overflow(timer->arg);
+ }
+
+ while (trigger_mask) {
+ index = rightmost_index(timer_table, &trigger_mask);
+ timer = timer_table->timers[index];
+ BUG_ON(!timer);
+ DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER,
+ "Gen timer[%d] trigger\n", index);
+ timer->trigger(timer->arg);
+ }
+}
+
+/*
+ * Primitive to disable ASPM
+ */
+void ath_pcie_aspm_disable(struct ath_softc *sc)
+{
+ struct pci_dev *pdev = to_pci_dev(sc->dev);
+ u8 aspm;
+
+ pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
+ aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
+ pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
}
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 9d0b31a..9106a0b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -42,6 +42,13 @@
#define AR_SUBVENDOR_ID_NEW_A 0x7065
#define AR5416_MAGIC 0x19641014
+#define AR5416_DEVID_AR9287_PCI 0x002D
+#define AR5416_DEVID_AR9287_PCIE 0x002E
+
+#define AR9280_COEX2WIRE_SUBSYSID 0x309b
+#define AT9285_COEX3WIRE_SA_SUBSYSID 0x30aa
+#define AT9285_COEX3WIRE_DA_SUBSYSID 0x30ab
+
/* Register read/write primitives */
#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
@@ -76,6 +83,7 @@
#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
#define AR_GPIO_OUTPUT_MUX_AS_PCIE_POWER_LED 2
#define AR_GPIO_OUTPUT_MUX_AS_TX_FRAME 3
+#define AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL 4
#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED 5
#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED 6
@@ -95,6 +103,7 @@
#define MAX_RATE_POWER 63
#define AH_WAIT_TIMEOUT 100000 /* (us) */
+#define AH_TSF_WRITE_TIMEOUT 100 /* (us) */
#define AH_TIME_QUANTUM 10
#define AR_KEYTABLE_SIZE 128
#define POWER_UP_TIME 200000
@@ -113,15 +122,20 @@
enum wireless_mode {
ATH9K_MODE_11A = 0,
- ATH9K_MODE_11B = 2,
- ATH9K_MODE_11G = 3,
- ATH9K_MODE_11NA_HT20 = 6,
- ATH9K_MODE_11NG_HT20 = 7,
- ATH9K_MODE_11NA_HT40PLUS = 8,
- ATH9K_MODE_11NA_HT40MINUS = 9,
- ATH9K_MODE_11NG_HT40PLUS = 10,
- ATH9K_MODE_11NG_HT40MINUS = 11,
- ATH9K_MODE_MAX
+ ATH9K_MODE_11G,
+ ATH9K_MODE_11NA_HT20,
+ ATH9K_MODE_11NG_HT20,
+ ATH9K_MODE_11NA_HT40PLUS,
+ ATH9K_MODE_11NA_HT40MINUS,
+ ATH9K_MODE_11NG_HT40PLUS,
+ ATH9K_MODE_11NG_HT40MINUS,
+ ATH9K_MODE_MAX,
+};
+
+enum ath9k_ant_setting {
+ ATH9K_ANT_VARIABLE = 0,
+ ATH9K_ANT_FIXED_A,
+ ATH9K_ANT_FIXED_B
};
enum ath9k_hw_caps {
@@ -142,7 +156,6 @@
ATH9K_HW_CAP_ENHANCEDPM = BIT(14),
ATH9K_HW_CAP_AUTOSLEEP = BIT(15),
ATH9K_HW_CAP_4KB_SPLITTRANS = BIT(16),
- ATH9K_HW_CAP_BT_COEX = BIT(17)
};
enum ath9k_capability_type {
@@ -188,7 +201,7 @@
u32 cck_trig_high;
u32 cck_trig_low;
u32 enable_ani;
- u16 diversity_control;
+ enum ath9k_ant_setting diversity_control;
u16 antenna_switch_swap;
int serialize_regmode;
bool intr_mitigation;
@@ -229,6 +242,7 @@
ATH9K_INT_GPIO = 0x01000000,
ATH9K_INT_CABEND = 0x02000000,
ATH9K_INT_TSFOOR = 0x04000000,
+ ATH9K_INT_GENTIMER = 0x08000000,
ATH9K_INT_CST = 0x10000000,
ATH9K_INT_GTT = 0x20000000,
ATH9K_INT_FATAL = 0x40000000,
@@ -327,12 +341,6 @@
ATH9K_PM_UNDEFINED
};
-enum ath9k_ant_setting {
- ATH9K_ANT_VARIABLE = 0,
- ATH9K_ANT_FIXED_A,
- ATH9K_ANT_FIXED_B
-};
-
enum ath9k_tp_scale {
ATH9K_TP_SCALE_MAX = 0,
ATH9K_TP_SCALE_50,
@@ -386,6 +394,42 @@
u16 phyRev;
u16 analog5GhzRev;
u16 analog2GhzRev;
+ u16 subsysid;
+};
+
+/* Generic TSF timer definitions */
+
+#define ATH_MAX_GEN_TIMER 16
+
+#define AR_GENTMR_BIT(_index) (1 << (_index))
+
+/*
+ * Using de Bruijin sequence to to look up 1's index in a 32 bit number
+ * debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001
+ */
+#define debruijn32 0x077CB531UL
+
+struct ath_gen_timer_configuration {
+ u32 next_addr;
+ u32 period_addr;
+ u32 mode_addr;
+ u32 mode_mask;
+};
+
+struct ath_gen_timer {
+ void (*trigger)(void *arg);
+ void (*overflow)(void *arg);
+ void *arg;
+ u8 index;
+};
+
+struct ath_gen_timer_table {
+ u32 gen_timer_index[32];
+ struct ath_gen_timer *timers[ATH_MAX_GEN_TIMER];
+ union {
+ unsigned long timer_bits;
+ u16 val;
+ } timer_mask;
};
struct ath_hw {
@@ -393,13 +437,13 @@
struct ath9k_hw_version hw_version;
struct ath9k_ops_config config;
struct ath9k_hw_capabilities caps;
- struct ath_regulatory regulatory;
struct ath9k_channel channels[38];
struct ath9k_channel *curchan;
union {
struct ar5416_eeprom_def def;
struct ar5416_eeprom_4k map4k;
+ struct ar9287_eeprom map9287;
} eeprom;
const struct eeprom_ops *eep_ops;
enum ath9k_eep_map eep_map;
@@ -411,15 +455,15 @@
u16 rfsilent;
u32 rfkill_gpio;
u32 rfkill_polarity;
- u32 btactive_gpio;
- u32 wlanactive_gpio;
u32 ah_flags;
+ bool htc_reset_init;
+
enum nl80211_iftype opmode;
enum ath9k_power_mode power_mode;
- enum ath9k_power_mode restore_mode;
struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+ struct ath9k_pacal_info pacal_info;
struct ar5416Stats stats;
struct ath9k_tx_queue_info txq[ATH9K_NUM_TX_QUEUES];
@@ -432,8 +476,6 @@
u32 txurn_interrupt_mask;
bool chip_fullsleep;
u32 atim_window;
- u16 antenna_switch_swap;
- enum ath9k_ant_setting diversity_control;
/* Calibration */
enum ath9k_cal_types supp_cals;
@@ -502,7 +544,6 @@
/* ANI */
u32 proc_phyerr;
- bool has_hw_phycounters;
u32 aniperiod;
struct ar5416AniState *curani;
struct ar5416AniState ani[255];
@@ -520,6 +561,7 @@
u32 originalGain[22];
int initPDADC;
int PDADCdelta;
+ u8 led_pin;
struct ar5416IniArray iniModes;
struct ar5416IniArray iniCommon;
@@ -536,13 +578,17 @@
struct ar5416IniArray iniModesAdditional;
struct ar5416IniArray iniModesRxGain;
struct ar5416IniArray iniModesTxGain;
+
+ u32 intr_gen_timer_trigger;
+ u32 intr_gen_timer_thresh;
+ struct ath_gen_timer_table hw_gen_timers;
};
-/* Attach, Detach, Reset */
+/* Initialization, Detach, Reset */
const char *ath9k_hw_probe(u16 vendorid, u16 devid);
void ath9k_hw_detach(struct ath_hw *ah);
-struct ath_hw *ath9k_hw_attach(u16 devid, struct ath_softc *sc, int *error);
-void ath9k_hw_rfdetach(struct ath_hw *ah);
+int ath9k_hw_init(struct ath_hw *ah);
+void ath9k_hw_rf_free(struct ath_hw *ah);
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
bool bChannelChange);
void ath9k_hw_fill_cap_info(struct ath_hw *ah);
@@ -596,7 +642,7 @@
u64 ath9k_hw_gettsf64(struct ath_hw *ah);
void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64);
void ath9k_hw_reset_tsf(struct ath_hw *ah);
-bool ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
+void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
void ath9k_hw_set11nmac2040(struct ath_hw *ah, enum ath9k_ht_macmode mode);
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
@@ -609,9 +655,24 @@
/* Interrupt Handling */
bool ath9k_hw_intrpend(struct ath_hw *ah);
bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked);
-enum ath9k_int ath9k_hw_intrget(struct ath_hw *ah);
enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints);
-void ath9k_hw_btcoex_enable(struct ath_hw *ah);
+/* Generic hw timer primitives */
+struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
+ void (*trigger)(void *),
+ void (*overflow)(void *),
+ void *arg,
+ u8 timer_index);
+void ath_gen_timer_start(struct ath_hw *ah, struct ath_gen_timer *timer,
+ u32 timer_next, u32 timer_period);
+void ath_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
+void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
+void ath_gen_timer_isr(struct ath_hw *hw);
+u32 ath9k_hw_gettsf32(struct ath_hw *ah);
+#define ATH_PCIE_CAP_LINK_CTRL 0x70
+#define ATH_PCIE_CAP_LINK_L0S 1
+#define ATH_PCIE_CAP_LINK_L1 2
+
+void ath_pcie_aspm_disable(struct ath_softc *sc);
#endif
diff --git a/drivers/net/wireless/ath/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h
index e2f0a34..8622265 100644
--- a/drivers/net/wireless/ath/ath9k/initvals.h
+++ b/drivers/net/wireless/ath/ath9k/initvals.h
@@ -2782,7 +2782,7 @@
{ 0x00008338, 0x00ff0000 },
{ 0x0000833c, 0x00000000 },
{ 0x00008340, 0x000107ff },
- { 0x00008344, 0x00581043 },
+ { 0x00008344, 0x00481043 },
{ 0x00009808, 0x00000000 },
{ 0x0000980c, 0xafa68e30 },
{ 0x00009810, 0xfd14e000 },
@@ -3439,7 +3439,7 @@
{0x00004044, 0x00000000 },
};
-/* AR9285 */
+/* AR9285 Revsion 10*/
static const u_int32_t ar9285Modes_9285[][6] = {
{ 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
{ 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
@@ -3955,7 +3955,7 @@
{ 0x00008338, 0x00000000 },
{ 0x0000833c, 0x00000000 },
{ 0x00008340, 0x00010380 },
- { 0x00008344, 0x00581043 },
+ { 0x00008344, 0x00481043 },
{ 0x00009808, 0x00000000 },
{ 0x0000980c, 0xafe68e30 },
{ 0x00009810, 0xfd14e000 },
@@ -4121,8 +4121,2252 @@
{0x00004044, 0x00000000 },
};
-/* AR9285 v1_2 PCI Register Writes. Created: 03/04/09 */
+/* AR9285 v1_2 PCI Register Writes. Created: 04/13/09 */
static const u_int32_t ar9285Modes_9285_1_2[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
+ { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
+ { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
+ { 0x000010f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000008 },
+ { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
+ { 0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b, 0x0988004f },
+ { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
+ { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
+ { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
+ { 0x00009824, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e },
+ { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+ { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+ { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
+ { 0x00009840, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e },
+ { 0x00009844, 0x0372161e, 0x0372161e, 0x03721620, 0x03721620, 0x037216a0 },
+ { 0x00009848, 0x00001066, 0x00001066, 0x00001053, 0x00001053, 0x00001059 },
+ { 0x0000a848, 0x00001066, 0x00001066, 0x00001053, 0x00001053, 0x00001059 },
+ { 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 },
+ { 0x00009858, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e },
+ { 0x0000985c, 0x3139605e, 0x3139605e, 0x3137605e, 0x3137605e, 0x3139605e },
+ { 0x00009860, 0x00058d18, 0x00058d18, 0x00058d20, 0x00058d20, 0x00058d18 },
+ { 0x00009864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+ { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
+ { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+ { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
+ { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+ { 0x00009924, 0xd00a8007, 0xd00a8007, 0xd00a800d, 0xd00a800d, 0xd00a800d },
+ { 0x00009944, 0xffbc1010, 0xffbc1010, 0xffbc1020, 0xffbc1020, 0xffbc1010 },
+ { 0x00009960, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x00009964, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x000099b8, 0x0000421c, 0x0000421c, 0x0000421c, 0x0000421c, 0x0000421c },
+ { 0x000099bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
+ { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+ { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
+ { 0x000099c8, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f },
+ { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
+ { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
+ { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x00009a00, 0x00000000, 0x00000000, 0x00058084, 0x00058084, 0x00000000 },
+ { 0x00009a04, 0x00000000, 0x00000000, 0x00058088, 0x00058088, 0x00000000 },
+ { 0x00009a08, 0x00000000, 0x00000000, 0x0005808c, 0x0005808c, 0x00000000 },
+ { 0x00009a0c, 0x00000000, 0x00000000, 0x00058100, 0x00058100, 0x00000000 },
+ { 0x00009a10, 0x00000000, 0x00000000, 0x00058104, 0x00058104, 0x00000000 },
+ { 0x00009a14, 0x00000000, 0x00000000, 0x00058108, 0x00058108, 0x00000000 },
+ { 0x00009a18, 0x00000000, 0x00000000, 0x0005810c, 0x0005810c, 0x00000000 },
+ { 0x00009a1c, 0x00000000, 0x00000000, 0x00058110, 0x00058110, 0x00000000 },
+ { 0x00009a20, 0x00000000, 0x00000000, 0x00058114, 0x00058114, 0x00000000 },
+ { 0x00009a24, 0x00000000, 0x00000000, 0x00058180, 0x00058180, 0x00000000 },
+ { 0x00009a28, 0x00000000, 0x00000000, 0x00058184, 0x00058184, 0x00000000 },
+ { 0x00009a2c, 0x00000000, 0x00000000, 0x00058188, 0x00058188, 0x00000000 },
+ { 0x00009a30, 0x00000000, 0x00000000, 0x0005818c, 0x0005818c, 0x00000000 },
+ { 0x00009a34, 0x00000000, 0x00000000, 0x00058190, 0x00058190, 0x00000000 },
+ { 0x00009a38, 0x00000000, 0x00000000, 0x00058194, 0x00058194, 0x00000000 },
+ { 0x00009a3c, 0x00000000, 0x00000000, 0x000581a0, 0x000581a0, 0x00000000 },
+ { 0x00009a40, 0x00000000, 0x00000000, 0x0005820c, 0x0005820c, 0x00000000 },
+ { 0x00009a44, 0x00000000, 0x00000000, 0x000581a8, 0x000581a8, 0x00000000 },
+ { 0x00009a48, 0x00000000, 0x00000000, 0x00058284, 0x00058284, 0x00000000 },
+ { 0x00009a4c, 0x00000000, 0x00000000, 0x00058288, 0x00058288, 0x00000000 },
+ { 0x00009a50, 0x00000000, 0x00000000, 0x00058220, 0x00058220, 0x00000000 },
+ { 0x00009a54, 0x00000000, 0x00000000, 0x00058290, 0x00058290, 0x00000000 },
+ { 0x00009a58, 0x00000000, 0x00000000, 0x00058300, 0x00058300, 0x00000000 },
+ { 0x00009a5c, 0x00000000, 0x00000000, 0x00058304, 0x00058304, 0x00000000 },
+ { 0x00009a60, 0x00000000, 0x00000000, 0x00058308, 0x00058308, 0x00000000 },
+ { 0x00009a64, 0x00000000, 0x00000000, 0x0005830c, 0x0005830c, 0x00000000 },
+ { 0x00009a68, 0x00000000, 0x00000000, 0x00058380, 0x00058380, 0x00000000 },
+ { 0x00009a6c, 0x00000000, 0x00000000, 0x00058384, 0x00058384, 0x00000000 },
+ { 0x00009a70, 0x00000000, 0x00000000, 0x00068700, 0x00068700, 0x00000000 },
+ { 0x00009a74, 0x00000000, 0x00000000, 0x00068704, 0x00068704, 0x00000000 },
+ { 0x00009a78, 0x00000000, 0x00000000, 0x00068708, 0x00068708, 0x00000000 },
+ { 0x00009a7c, 0x00000000, 0x00000000, 0x0006870c, 0x0006870c, 0x00000000 },
+ { 0x00009a80, 0x00000000, 0x00000000, 0x00068780, 0x00068780, 0x00000000 },
+ { 0x00009a84, 0x00000000, 0x00000000, 0x00068784, 0x00068784, 0x00000000 },
+ { 0x00009a88, 0x00000000, 0x00000000, 0x00078b04, 0x00078b04, 0x00000000 },
+ { 0x00009a8c, 0x00000000, 0x00000000, 0x00078b08, 0x00078b08, 0x00000000 },
+ { 0x00009a90, 0x00000000, 0x00000000, 0x00078b08, 0x00078b08, 0x00000000 },
+ { 0x00009a94, 0x00000000, 0x00000000, 0x00078b0c, 0x00078b0c, 0x00000000 },
+ { 0x00009a98, 0x00000000, 0x00000000, 0x00078b80, 0x00078b80, 0x00000000 },
+ { 0x00009a9c, 0x00000000, 0x00000000, 0x00078b84, 0x00078b84, 0x00000000 },
+ { 0x00009aa0, 0x00000000, 0x00000000, 0x00078b88, 0x00078b88, 0x00000000 },
+ { 0x00009aa4, 0x00000000, 0x00000000, 0x00078b8c, 0x00078b8c, 0x00000000 },
+ { 0x00009aa8, 0x00000000, 0x00000000, 0x00078b90, 0x00078b90, 0x00000000 },
+ { 0x00009aac, 0x00000000, 0x00000000, 0x000caf80, 0x000caf80, 0x00000000 },
+ { 0x00009ab0, 0x00000000, 0x00000000, 0x000caf84, 0x000caf84, 0x00000000 },
+ { 0x00009ab4, 0x00000000, 0x00000000, 0x000caf88, 0x000caf88, 0x00000000 },
+ { 0x00009ab8, 0x00000000, 0x00000000, 0x000caf8c, 0x000caf8c, 0x00000000 },
+ { 0x00009abc, 0x00000000, 0x00000000, 0x000caf90, 0x000caf90, 0x00000000 },
+ { 0x00009ac0, 0x00000000, 0x00000000, 0x000db30c, 0x000db30c, 0x00000000 },
+ { 0x00009ac4, 0x00000000, 0x00000000, 0x000db310, 0x000db310, 0x00000000 },
+ { 0x00009ac8, 0x00000000, 0x00000000, 0x000db384, 0x000db384, 0x00000000 },
+ { 0x00009acc, 0x00000000, 0x00000000, 0x000db388, 0x000db388, 0x00000000 },
+ { 0x00009ad0, 0x00000000, 0x00000000, 0x000db324, 0x000db324, 0x00000000 },
+ { 0x00009ad4, 0x00000000, 0x00000000, 0x000eb704, 0x000eb704, 0x00000000 },
+ { 0x00009ad8, 0x00000000, 0x00000000, 0x000eb6a4, 0x000eb6a4, 0x00000000 },
+ { 0x00009adc, 0x00000000, 0x00000000, 0x000eb6a8, 0x000eb6a8, 0x00000000 },
+ { 0x00009ae0, 0x00000000, 0x00000000, 0x000eb710, 0x000eb710, 0x00000000 },
+ { 0x00009ae4, 0x00000000, 0x00000000, 0x000eb714, 0x000eb714, 0x00000000 },
+ { 0x00009ae8, 0x00000000, 0x00000000, 0x000eb720, 0x000eb720, 0x00000000 },
+ { 0x00009aec, 0x00000000, 0x00000000, 0x000eb724, 0x000eb724, 0x00000000 },
+ { 0x00009af0, 0x00000000, 0x00000000, 0x000eb728, 0x000eb728, 0x00000000 },
+ { 0x00009af4, 0x00000000, 0x00000000, 0x000eb72c, 0x000eb72c, 0x00000000 },
+ { 0x00009af8, 0x00000000, 0x00000000, 0x000eb7a0, 0x000eb7a0, 0x00000000 },
+ { 0x00009afc, 0x00000000, 0x00000000, 0x000eb7a4, 0x000eb7a4, 0x00000000 },
+ { 0x00009b00, 0x00000000, 0x00000000, 0x000eb7a8, 0x000eb7a8, 0x00000000 },
+ { 0x00009b04, 0x00000000, 0x00000000, 0x000eb7b0, 0x000eb7b0, 0x00000000 },
+ { 0x00009b08, 0x00000000, 0x00000000, 0x000eb7b4, 0x000eb7b4, 0x00000000 },
+ { 0x00009b0c, 0x00000000, 0x00000000, 0x000eb7b8, 0x000eb7b8, 0x00000000 },
+ { 0x00009b10, 0x00000000, 0x00000000, 0x000eb7a5, 0x000eb7a5, 0x00000000 },
+ { 0x00009b14, 0x00000000, 0x00000000, 0x000eb7a9, 0x000eb7a9, 0x00000000 },
+ { 0x00009b18, 0x00000000, 0x00000000, 0x000eb7ad, 0x000eb7ad, 0x00000000 },
+ { 0x00009b1c, 0x00000000, 0x00000000, 0x000eb7b1, 0x000eb7b1, 0x00000000 },
+ { 0x00009b20, 0x00000000, 0x00000000, 0x000eb7b5, 0x000eb7b5, 0x00000000 },
+ { 0x00009b24, 0x00000000, 0x00000000, 0x000eb7b9, 0x000eb7b9, 0x00000000 },
+ { 0x00009b28, 0x00000000, 0x00000000, 0x000eb7c5, 0x000eb7c5, 0x00000000 },
+ { 0x00009b2c, 0x00000000, 0x00000000, 0x000eb7c9, 0x000eb7c9, 0x00000000 },
+ { 0x00009b30, 0x00000000, 0x00000000, 0x000eb7d1, 0x000eb7d1, 0x00000000 },
+ { 0x00009b34, 0x00000000, 0x00000000, 0x000eb7d5, 0x000eb7d5, 0x00000000 },
+ { 0x00009b38, 0x00000000, 0x00000000, 0x000eb7d9, 0x000eb7d9, 0x00000000 },
+ { 0x00009b3c, 0x00000000, 0x00000000, 0x000eb7c6, 0x000eb7c6, 0x00000000 },
+ { 0x00009b40, 0x00000000, 0x00000000, 0x000eb7ca, 0x000eb7ca, 0x00000000 },
+ { 0x00009b44, 0x00000000, 0x00000000, 0x000eb7ce, 0x000eb7ce, 0x00000000 },
+ { 0x00009b48, 0x00000000, 0x00000000, 0x000eb7d2, 0x000eb7d2, 0x00000000 },
+ { 0x00009b4c, 0x00000000, 0x00000000, 0x000eb7d6, 0x000eb7d6, 0x00000000 },
+ { 0x00009b50, 0x00000000, 0x00000000, 0x000eb7c3, 0x000eb7c3, 0x00000000 },
+ { 0x00009b54, 0x00000000, 0x00000000, 0x000eb7c7, 0x000eb7c7, 0x00000000 },
+ { 0x00009b58, 0x00000000, 0x00000000, 0x000eb7cb, 0x000eb7cb, 0x00000000 },
+ { 0x00009b5c, 0x00000000, 0x00000000, 0x000eb7cf, 0x000eb7cf, 0x00000000 },
+ { 0x00009b60, 0x00000000, 0x00000000, 0x000eb7d7, 0x000eb7d7, 0x00000000 },
+ { 0x00009b64, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b68, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b6c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b70, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b74, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b78, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b7c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b80, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b84, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b88, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b8c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b90, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b94, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b98, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009b9c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009ba0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009ba4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009ba8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bac, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bb0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bb4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bb8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bbc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bc0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bc4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bc8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bcc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bd0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bd4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bd8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bdc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009be0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009be4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009be8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bec, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bf0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bf4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bf8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x00009bfc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000aa00, 0x00000000, 0x00000000, 0x00058084, 0x00058084, 0x00000000 },
+ { 0x0000aa04, 0x00000000, 0x00000000, 0x00058088, 0x00058088, 0x00000000 },
+ { 0x0000aa08, 0x00000000, 0x00000000, 0x0005808c, 0x0005808c, 0x00000000 },
+ { 0x0000aa0c, 0x00000000, 0x00000000, 0x00058100, 0x00058100, 0x00000000 },
+ { 0x0000aa10, 0x00000000, 0x00000000, 0x00058104, 0x00058104, 0x00000000 },
+ { 0x0000aa14, 0x00000000, 0x00000000, 0x00058108, 0x00058108, 0x00000000 },
+ { 0x0000aa18, 0x00000000, 0x00000000, 0x0005810c, 0x0005810c, 0x00000000 },
+ { 0x0000aa1c, 0x00000000, 0x00000000, 0x00058110, 0x00058110, 0x00000000 },
+ { 0x0000aa20, 0x00000000, 0x00000000, 0x00058114, 0x00058114, 0x00000000 },
+ { 0x0000aa24, 0x00000000, 0x00000000, 0x00058180, 0x00058180, 0x00000000 },
+ { 0x0000aa28, 0x00000000, 0x00000000, 0x00058184, 0x00058184, 0x00000000 },
+ { 0x0000aa2c, 0x00000000, 0x00000000, 0x00058188, 0x00058188, 0x00000000 },
+ { 0x0000aa30, 0x00000000, 0x00000000, 0x0005818c, 0x0005818c, 0x00000000 },
+ { 0x0000aa34, 0x00000000, 0x00000000, 0x00058190, 0x00058190, 0x00000000 },
+ { 0x0000aa38, 0x00000000, 0x00000000, 0x00058194, 0x00058194, 0x00000000 },
+ { 0x0000aa3c, 0x00000000, 0x00000000, 0x000581a0, 0x000581a0, 0x00000000 },
+ { 0x0000aa40, 0x00000000, 0x00000000, 0x0005820c, 0x0005820c, 0x00000000 },
+ { 0x0000aa44, 0x00000000, 0x00000000, 0x000581a8, 0x000581a8, 0x00000000 },
+ { 0x0000aa48, 0x00000000, 0x00000000, 0x00058284, 0x00058284, 0x00000000 },
+ { 0x0000aa4c, 0x00000000, 0x00000000, 0x00058288, 0x00058288, 0x00000000 },
+ { 0x0000aa50, 0x00000000, 0x00000000, 0x00058220, 0x00058220, 0x00000000 },
+ { 0x0000aa54, 0x00000000, 0x00000000, 0x00058290, 0x00058290, 0x00000000 },
+ { 0x0000aa58, 0x00000000, 0x00000000, 0x00058300, 0x00058300, 0x00000000 },
+ { 0x0000aa5c, 0x00000000, 0x00000000, 0x00058304, 0x00058304, 0x00000000 },
+ { 0x0000aa60, 0x00000000, 0x00000000, 0x00058308, 0x00058308, 0x00000000 },
+ { 0x0000aa64, 0x00000000, 0x00000000, 0x0005830c, 0x0005830c, 0x00000000 },
+ { 0x0000aa68, 0x00000000, 0x00000000, 0x00058380, 0x00058380, 0x00000000 },
+ { 0x0000aa6c, 0x00000000, 0x00000000, 0x00058384, 0x00058384, 0x00000000 },
+ { 0x0000aa70, 0x00000000, 0x00000000, 0x00068700, 0x00068700, 0x00000000 },
+ { 0x0000aa74, 0x00000000, 0x00000000, 0x00068704, 0x00068704, 0x00000000 },
+ { 0x0000aa78, 0x00000000, 0x00000000, 0x00068708, 0x00068708, 0x00000000 },
+ { 0x0000aa7c, 0x00000000, 0x00000000, 0x0006870c, 0x0006870c, 0x00000000 },
+ { 0x0000aa80, 0x00000000, 0x00000000, 0x00068780, 0x00068780, 0x00000000 },
+ { 0x0000aa84, 0x00000000, 0x00000000, 0x00068784, 0x00068784, 0x00000000 },
+ { 0x0000aa88, 0x00000000, 0x00000000, 0x00078b04, 0x00078b04, 0x00000000 },
+ { 0x0000aa8c, 0x00000000, 0x00000000, 0x00078b08, 0x00078b08, 0x00000000 },
+ { 0x0000aa90, 0x00000000, 0x00000000, 0x00078b08, 0x00078b08, 0x00000000 },
+ { 0x0000aa94, 0x00000000, 0x00000000, 0x00078b0c, 0x00078b0c, 0x00000000 },
+ { 0x0000aa98, 0x00000000, 0x00000000, 0x00078b80, 0x00078b80, 0x00000000 },
+ { 0x0000aa9c, 0x00000000, 0x00000000, 0x00078b84, 0x00078b84, 0x00000000 },
+ { 0x0000aaa0, 0x00000000, 0x00000000, 0x00078b88, 0x00078b88, 0x00000000 },
+ { 0x0000aaa4, 0x00000000, 0x00000000, 0x00078b8c, 0x00078b8c, 0x00000000 },
+ { 0x0000aaa8, 0x00000000, 0x00000000, 0x00078b90, 0x00078b90, 0x00000000 },
+ { 0x0000aaac, 0x00000000, 0x00000000, 0x000caf80, 0x000caf80, 0x00000000 },
+ { 0x0000aab0, 0x00000000, 0x00000000, 0x000caf84, 0x000caf84, 0x00000000 },
+ { 0x0000aab4, 0x00000000, 0x00000000, 0x000caf88, 0x000caf88, 0x00000000 },
+ { 0x0000aab8, 0x00000000, 0x00000000, 0x000caf8c, 0x000caf8c, 0x00000000 },
+ { 0x0000aabc, 0x00000000, 0x00000000, 0x000caf90, 0x000caf90, 0x00000000 },
+ { 0x0000aac0, 0x00000000, 0x00000000, 0x000db30c, 0x000db30c, 0x00000000 },
+ { 0x0000aac4, 0x00000000, 0x00000000, 0x000db310, 0x000db310, 0x00000000 },
+ { 0x0000aac8, 0x00000000, 0x00000000, 0x000db384, 0x000db384, 0x00000000 },
+ { 0x0000aacc, 0x00000000, 0x00000000, 0x000db388, 0x000db388, 0x00000000 },
+ { 0x0000aad0, 0x00000000, 0x00000000, 0x000db324, 0x000db324, 0x00000000 },
+ { 0x0000aad4, 0x00000000, 0x00000000, 0x000eb704, 0x000eb704, 0x00000000 },
+ { 0x0000aad8, 0x00000000, 0x00000000, 0x000eb6a4, 0x000eb6a4, 0x00000000 },
+ { 0x0000aadc, 0x00000000, 0x00000000, 0x000eb6a8, 0x000eb6a8, 0x00000000 },
+ { 0x0000aae0, 0x00000000, 0x00000000, 0x000eb710, 0x000eb710, 0x00000000 },
+ { 0x0000aae4, 0x00000000, 0x00000000, 0x000eb714, 0x000eb714, 0x00000000 },
+ { 0x0000aae8, 0x00000000, 0x00000000, 0x000eb720, 0x000eb720, 0x00000000 },
+ { 0x0000aaec, 0x00000000, 0x00000000, 0x000eb724, 0x000eb724, 0x00000000 },
+ { 0x0000aaf0, 0x00000000, 0x00000000, 0x000eb728, 0x000eb728, 0x00000000 },
+ { 0x0000aaf4, 0x00000000, 0x00000000, 0x000eb72c, 0x000eb72c, 0x00000000 },
+ { 0x0000aaf8, 0x00000000, 0x00000000, 0x000eb7a0, 0x000eb7a0, 0x00000000 },
+ { 0x0000aafc, 0x00000000, 0x00000000, 0x000eb7a4, 0x000eb7a4, 0x00000000 },
+ { 0x0000ab00, 0x00000000, 0x00000000, 0x000eb7a8, 0x000eb7a8, 0x00000000 },
+ { 0x0000ab04, 0x00000000, 0x00000000, 0x000eb7b0, 0x000eb7b0, 0x00000000 },
+ { 0x0000ab08, 0x00000000, 0x00000000, 0x000eb7b4, 0x000eb7b4, 0x00000000 },
+ { 0x0000ab0c, 0x00000000, 0x00000000, 0x000eb7b8, 0x000eb7b8, 0x00000000 },
+ { 0x0000ab10, 0x00000000, 0x00000000, 0x000eb7a5, 0x000eb7a5, 0x00000000 },
+ { 0x0000ab14, 0x00000000, 0x00000000, 0x000eb7a9, 0x000eb7a9, 0x00000000 },
+ { 0x0000ab18, 0x00000000, 0x00000000, 0x000eb7ad, 0x000eb7ad, 0x00000000 },
+ { 0x0000ab1c, 0x00000000, 0x00000000, 0x000eb7b1, 0x000eb7b1, 0x00000000 },
+ { 0x0000ab20, 0x00000000, 0x00000000, 0x000eb7b5, 0x000eb7b5, 0x00000000 },
+ { 0x0000ab24, 0x00000000, 0x00000000, 0x000eb7b9, 0x000eb7b9, 0x00000000 },
+ { 0x0000ab28, 0x00000000, 0x00000000, 0x000eb7c5, 0x000eb7c5, 0x00000000 },
+ { 0x0000ab2c, 0x00000000, 0x00000000, 0x000eb7c9, 0x000eb7c9, 0x00000000 },
+ { 0x0000ab30, 0x00000000, 0x00000000, 0x000eb7d1, 0x000eb7d1, 0x00000000 },
+ { 0x0000ab34, 0x00000000, 0x00000000, 0x000eb7d5, 0x000eb7d5, 0x00000000 },
+ { 0x0000ab38, 0x00000000, 0x00000000, 0x000eb7d9, 0x000eb7d9, 0x00000000 },
+ { 0x0000ab3c, 0x00000000, 0x00000000, 0x000eb7c6, 0x000eb7c6, 0x00000000 },
+ { 0x0000ab40, 0x00000000, 0x00000000, 0x000eb7ca, 0x000eb7ca, 0x00000000 },
+ { 0x0000ab44, 0x00000000, 0x00000000, 0x000eb7ce, 0x000eb7ce, 0x00000000 },
+ { 0x0000ab48, 0x00000000, 0x00000000, 0x000eb7d2, 0x000eb7d2, 0x00000000 },
+ { 0x0000ab4c, 0x00000000, 0x00000000, 0x000eb7d6, 0x000eb7d6, 0x00000000 },
+ { 0x0000ab50, 0x00000000, 0x00000000, 0x000eb7c3, 0x000eb7c3, 0x00000000 },
+ { 0x0000ab54, 0x00000000, 0x00000000, 0x000eb7c7, 0x000eb7c7, 0x00000000 },
+ { 0x0000ab58, 0x00000000, 0x00000000, 0x000eb7cb, 0x000eb7cb, 0x00000000 },
+ { 0x0000ab5c, 0x00000000, 0x00000000, 0x000eb7cf, 0x000eb7cf, 0x00000000 },
+ { 0x0000ab60, 0x00000000, 0x00000000, 0x000eb7d7, 0x000eb7d7, 0x00000000 },
+ { 0x0000ab64, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab68, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab6c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab70, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab74, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab78, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab7c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab80, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab84, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab88, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab8c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab90, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab94, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab98, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000ab9c, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000aba0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000aba4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000aba8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abac, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abb0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abb4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abb8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abbc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abc0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abc4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abc8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abcc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abd0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abd4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abd8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abdc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abe0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abe4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abe8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abec, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abf0, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abf4, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abf8, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000abfc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
+ { 0x0000a204, 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 },
+ { 0x0000a20c, 0x00000014, 0x00000014, 0x0001f000, 0x0001f000, 0x0001f000 },
+ { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f000, 0x0001f000, 0x0001f000 },
+ { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
+ { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+ { 0x0000a250, 0x0004f000, 0x0004f000, 0x0004a000, 0x0004a000, 0x0004a000 },
+ { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+};
+
+static const u_int32_t ar9285Common_9285_1_2[][2] = {
+ { 0x0000000c, 0x00000000 },
+ { 0x00000030, 0x00020045 },
+ { 0x00000034, 0x00000005 },
+ { 0x00000040, 0x00000000 },
+ { 0x00000044, 0x00000008 },
+ { 0x00000048, 0x00000008 },
+ { 0x0000004c, 0x00000010 },
+ { 0x00000050, 0x00000000 },
+ { 0x00000054, 0x0000001f },
+ { 0x00000800, 0x00000000 },
+ { 0x00000804, 0x00000000 },
+ { 0x00000808, 0x00000000 },
+ { 0x0000080c, 0x00000000 },
+ { 0x00000810, 0x00000000 },
+ { 0x00000814, 0x00000000 },
+ { 0x00000818, 0x00000000 },
+ { 0x0000081c, 0x00000000 },
+ { 0x00000820, 0x00000000 },
+ { 0x00000824, 0x00000000 },
+ { 0x00001040, 0x002ffc0f },
+ { 0x00001044, 0x002ffc0f },
+ { 0x00001048, 0x002ffc0f },
+ { 0x0000104c, 0x002ffc0f },
+ { 0x00001050, 0x002ffc0f },
+ { 0x00001054, 0x002ffc0f },
+ { 0x00001058, 0x002ffc0f },
+ { 0x0000105c, 0x002ffc0f },
+ { 0x00001060, 0x002ffc0f },
+ { 0x00001064, 0x002ffc0f },
+ { 0x00001230, 0x00000000 },
+ { 0x00001270, 0x00000000 },
+ { 0x00001038, 0x00000000 },
+ { 0x00001078, 0x00000000 },
+ { 0x000010b8, 0x00000000 },
+ { 0x000010f8, 0x00000000 },
+ { 0x00001138, 0x00000000 },
+ { 0x00001178, 0x00000000 },
+ { 0x000011b8, 0x00000000 },
+ { 0x000011f8, 0x00000000 },
+ { 0x00001238, 0x00000000 },
+ { 0x00001278, 0x00000000 },
+ { 0x000012b8, 0x00000000 },
+ { 0x000012f8, 0x00000000 },
+ { 0x00001338, 0x00000000 },
+ { 0x00001378, 0x00000000 },
+ { 0x000013b8, 0x00000000 },
+ { 0x000013f8, 0x00000000 },
+ { 0x00001438, 0x00000000 },
+ { 0x00001478, 0x00000000 },
+ { 0x000014b8, 0x00000000 },
+ { 0x000014f8, 0x00000000 },
+ { 0x00001538, 0x00000000 },
+ { 0x00001578, 0x00000000 },
+ { 0x000015b8, 0x00000000 },
+ { 0x000015f8, 0x00000000 },
+ { 0x00001638, 0x00000000 },
+ { 0x00001678, 0x00000000 },
+ { 0x000016b8, 0x00000000 },
+ { 0x000016f8, 0x00000000 },
+ { 0x00001738, 0x00000000 },
+ { 0x00001778, 0x00000000 },
+ { 0x000017b8, 0x00000000 },
+ { 0x000017f8, 0x00000000 },
+ { 0x0000103c, 0x00000000 },
+ { 0x0000107c, 0x00000000 },
+ { 0x000010bc, 0x00000000 },
+ { 0x000010fc, 0x00000000 },
+ { 0x0000113c, 0x00000000 },
+ { 0x0000117c, 0x00000000 },
+ { 0x000011bc, 0x00000000 },
+ { 0x000011fc, 0x00000000 },
+ { 0x0000123c, 0x00000000 },
+ { 0x0000127c, 0x00000000 },
+ { 0x000012bc, 0x00000000 },
+ { 0x000012fc, 0x00000000 },
+ { 0x0000133c, 0x00000000 },
+ { 0x0000137c, 0x00000000 },
+ { 0x000013bc, 0x00000000 },
+ { 0x000013fc, 0x00000000 },
+ { 0x0000143c, 0x00000000 },
+ { 0x0000147c, 0x00000000 },
+ { 0x00004030, 0x00000002 },
+ { 0x0000403c, 0x00000002 },
+ { 0x00004024, 0x0000001f },
+ { 0x00004060, 0x00000000 },
+ { 0x00004064, 0x00000000 },
+ { 0x00007010, 0x00000031 },
+ { 0x00007034, 0x00000002 },
+ { 0x00007038, 0x000004c2 },
+ { 0x00008004, 0x00000000 },
+ { 0x00008008, 0x00000000 },
+ { 0x0000800c, 0x00000000 },
+ { 0x00008018, 0x00000700 },
+ { 0x00008020, 0x00000000 },
+ { 0x00008038, 0x00000000 },
+ { 0x0000803c, 0x00000000 },
+ { 0x00008048, 0x00000000 },
+ { 0x00008054, 0x00000000 },
+ { 0x00008058, 0x00000000 },
+ { 0x0000805c, 0x000fc78f },
+ { 0x00008060, 0x0000000f },
+ { 0x00008064, 0x00000000 },
+ { 0x00008070, 0x00000000 },
+ { 0x000080c0, 0x2a80001a },
+ { 0x000080c4, 0x05dc01e0 },
+ { 0x000080c8, 0x1f402710 },
+ { 0x000080cc, 0x01f40000 },
+ { 0x000080d0, 0x00001e00 },
+ { 0x000080d4, 0x00000000 },
+ { 0x000080d8, 0x00400000 },
+ { 0x000080e0, 0xffffffff },
+ { 0x000080e4, 0x0000ffff },
+ { 0x000080e8, 0x003f3f3f },
+ { 0x000080ec, 0x00000000 },
+ { 0x000080f0, 0x00000000 },
+ { 0x000080f4, 0x00000000 },
+ { 0x000080f8, 0x00000000 },
+ { 0x000080fc, 0x00020000 },
+ { 0x00008100, 0x00020000 },
+ { 0x00008104, 0x00000001 },
+ { 0x00008108, 0x00000052 },
+ { 0x0000810c, 0x00000000 },
+ { 0x00008110, 0x00000168 },
+ { 0x00008118, 0x000100aa },
+ { 0x0000811c, 0x00003210 },
+ { 0x00008120, 0x08f04810 },
+ { 0x00008124, 0x00000000 },
+ { 0x00008128, 0x00000000 },
+ { 0x0000812c, 0x00000000 },
+ { 0x00008130, 0x00000000 },
+ { 0x00008134, 0x00000000 },
+ { 0x00008138, 0x00000000 },
+ { 0x0000813c, 0x00000000 },
+ { 0x00008144, 0xffffffff },
+ { 0x00008168, 0x00000000 },
+ { 0x0000816c, 0x00000000 },
+ { 0x00008170, 0x32143320 },
+ { 0x00008174, 0xfaa4fa50 },
+ { 0x00008178, 0x00000100 },
+ { 0x0000817c, 0x00000000 },
+ { 0x000081c0, 0x00000000 },
+ { 0x000081d0, 0x0000320a },
+ { 0x000081ec, 0x00000000 },
+ { 0x000081f0, 0x00000000 },
+ { 0x000081f4, 0x00000000 },
+ { 0x000081f8, 0x00000000 },
+ { 0x000081fc, 0x00000000 },
+ { 0x00008200, 0x00000000 },
+ { 0x00008204, 0x00000000 },
+ { 0x00008208, 0x00000000 },
+ { 0x0000820c, 0x00000000 },
+ { 0x00008210, 0x00000000 },
+ { 0x00008214, 0x00000000 },
+ { 0x00008218, 0x00000000 },
+ { 0x0000821c, 0x00000000 },
+ { 0x00008220, 0x00000000 },
+ { 0x00008224, 0x00000000 },
+ { 0x00008228, 0x00000000 },
+ { 0x0000822c, 0x00000000 },
+ { 0x00008230, 0x00000000 },
+ { 0x00008234, 0x00000000 },
+ { 0x00008238, 0x00000000 },
+ { 0x0000823c, 0x00000000 },
+ { 0x00008240, 0x00100000 },
+ { 0x00008244, 0x0010f400 },
+ { 0x00008248, 0x00000100 },
+ { 0x0000824c, 0x0001e800 },
+ { 0x00008250, 0x00000000 },
+ { 0x00008254, 0x00000000 },
+ { 0x00008258, 0x00000000 },
+ { 0x0000825c, 0x400000ff },
+ { 0x00008260, 0x00080922 },
+ { 0x00008264, 0x88a00010 },
+ { 0x00008270, 0x00000000 },
+ { 0x00008274, 0x40000000 },
+ { 0x00008278, 0x003e4180 },
+ { 0x0000827c, 0x00000000 },
+ { 0x00008284, 0x0000002c },
+ { 0x00008288, 0x0000002c },
+ { 0x0000828c, 0x00000000 },
+ { 0x00008294, 0x00000000 },
+ { 0x00008298, 0x00000000 },
+ { 0x0000829c, 0x00000000 },
+ { 0x00008300, 0x00000040 },
+ { 0x00008314, 0x00000000 },
+ { 0x00008328, 0x00000000 },
+ { 0x0000832c, 0x00000001 },
+ { 0x00008330, 0x00000302 },
+ { 0x00008334, 0x00000e00 },
+ { 0x00008338, 0x00ff0000 },
+ { 0x0000833c, 0x00000000 },
+ { 0x00008340, 0x00010380 },
+ { 0x00008344, 0x00481043 },
+ { 0x00009808, 0x00000000 },
+ { 0x0000980c, 0xafe68e30 },
+ { 0x00009810, 0xfd14e000 },
+ { 0x00009814, 0x9c0a9f6b },
+ { 0x0000981c, 0x00000000 },
+ { 0x0000982c, 0x0000a000 },
+ { 0x00009830, 0x00000000 },
+ { 0x0000983c, 0x00200400 },
+ { 0x0000984c, 0x0040233c },
+ { 0x00009854, 0x00000044 },
+ { 0x00009900, 0x00000000 },
+ { 0x00009904, 0x00000000 },
+ { 0x00009908, 0x00000000 },
+ { 0x0000990c, 0x00000000 },
+ { 0x00009910, 0x01002310 },
+ { 0x0000991c, 0x10000fff },
+ { 0x00009920, 0x04900000 },
+ { 0x00009928, 0x00000001 },
+ { 0x0000992c, 0x00000004 },
+ { 0x00009934, 0x1e1f2022 },
+ { 0x00009938, 0x0a0b0c0d },
+ { 0x0000993c, 0x00000000 },
+ { 0x00009940, 0x14750604 },
+ { 0x00009948, 0x9280c00a },
+ { 0x0000994c, 0x00020028 },
+ { 0x00009954, 0x5f3ca3de },
+ { 0x00009958, 0x2108ecff },
+ { 0x00009968, 0x000003ce },
+ { 0x00009970, 0x192bb514 },
+ { 0x00009974, 0x00000000 },
+ { 0x00009978, 0x00000001 },
+ { 0x0000997c, 0x00000000 },
+ { 0x00009980, 0x00000000 },
+ { 0x00009984, 0x00000000 },
+ { 0x00009988, 0x00000000 },
+ { 0x0000998c, 0x00000000 },
+ { 0x00009990, 0x00000000 },
+ { 0x00009994, 0x00000000 },
+ { 0x00009998, 0x00000000 },
+ { 0x0000999c, 0x00000000 },
+ { 0x000099a0, 0x00000000 },
+ { 0x000099a4, 0x00000001 },
+ { 0x000099a8, 0x201fff00 },
+ { 0x000099ac, 0x2def0400 },
+ { 0x000099b0, 0x03051000 },
+ { 0x000099b4, 0x00000820 },
+ { 0x000099dc, 0x00000000 },
+ { 0x000099e0, 0x00000000 },
+ { 0x000099e4, 0xaaaaaaaa },
+ { 0x000099e8, 0x3c466478 },
+ { 0x000099ec, 0x0cc80caa },
+ { 0x000099f0, 0x00000000 },
+ { 0x0000a208, 0x803e68c8 },
+ { 0x0000a210, 0x4080a333 },
+ { 0x0000a214, 0x00206c10 },
+ { 0x0000a218, 0x009c4060 },
+ { 0x0000a220, 0x01834061 },
+ { 0x0000a224, 0x00000400 },
+ { 0x0000a228, 0x000003b5 },
+ { 0x0000a22c, 0x00000000 },
+ { 0x0000a234, 0x20202020 },
+ { 0x0000a238, 0x20202020 },
+ { 0x0000a244, 0x00000000 },
+ { 0x0000a248, 0xfffffffc },
+ { 0x0000a24c, 0x00000000 },
+ { 0x0000a254, 0x00000000 },
+ { 0x0000a258, 0x0ccb5380 },
+ { 0x0000a25c, 0x15151501 },
+ { 0x0000a260, 0xdfa90f01 },
+ { 0x0000a268, 0x00000000 },
+ { 0x0000a26c, 0x0ebae9e6 },
+ { 0x0000d270, 0x0d820820 },
+ { 0x0000d35c, 0x07ffffef },
+ { 0x0000d360, 0x0fffffe7 },
+ { 0x0000d364, 0x17ffffe5 },
+ { 0x0000d368, 0x1fffffe4 },
+ { 0x0000d36c, 0x37ffffe3 },
+ { 0x0000d370, 0x3fffffe3 },
+ { 0x0000d374, 0x57ffffe3 },
+ { 0x0000d378, 0x5fffffe2 },
+ { 0x0000d37c, 0x7fffffe2 },
+ { 0x0000d380, 0x7f3c7bba },
+ { 0x0000d384, 0xf3307ff0 },
+ { 0x0000a388, 0x0c000000 },
+ { 0x0000a38c, 0x20202020 },
+ { 0x0000a390, 0x20202020 },
+ { 0x0000a39c, 0x00000001 },
+ { 0x0000a3a0, 0x00000000 },
+ { 0x0000a3a4, 0x00000000 },
+ { 0x0000a3a8, 0x00000000 },
+ { 0x0000a3ac, 0x00000000 },
+ { 0x0000a3b0, 0x00000000 },
+ { 0x0000a3b4, 0x00000000 },
+ { 0x0000a3b8, 0x00000000 },
+ { 0x0000a3bc, 0x00000000 },
+ { 0x0000a3c0, 0x00000000 },
+ { 0x0000a3c4, 0x00000000 },
+ { 0x0000a3cc, 0x20202020 },
+ { 0x0000a3d0, 0x20202020 },
+ { 0x0000a3d4, 0x20202020 },
+ { 0x0000a3e4, 0x00000000 },
+ { 0x0000a3e8, 0x18c43433 },
+ { 0x0000a3ec, 0x00f70081 },
+ { 0x00007800, 0x00140000 },
+ { 0x00007804, 0x0e4548d8 },
+ { 0x00007808, 0x54214514 },
+ { 0x0000780c, 0x02025830 },
+ { 0x00007810, 0x71c0d388 },
+ { 0x00007814, 0x924934a8 },
+ { 0x0000781c, 0x00000000 },
+ { 0x00007824, 0x00d86fff },
+ { 0x00007828, 0x26d2491b },
+ { 0x0000782c, 0x6e36d97b },
+ { 0x00007830, 0xedb6d96e },
+ { 0x00007834, 0x71400087 },
+ { 0x0000783c, 0x0001fffe },
+ { 0x00007840, 0xffeb1a20 },
+ { 0x00007844, 0x000c0db6 },
+ { 0x00007848, 0x6db61b6f },
+ { 0x0000784c, 0x6d9b66db },
+ { 0x00007850, 0x6d8c6dba },
+ { 0x00007854, 0x00040000 },
+ { 0x00007858, 0xdb003012 },
+ { 0x0000785c, 0x04924914 },
+ { 0x00007860, 0x21084210 },
+ { 0x00007864, 0xf7d7ffde },
+ { 0x00007868, 0xc2034080 },
+ { 0x00007870, 0x10142c00 },
+};
+
+static const u_int32_t ar9285Modes_high_power_tx_gain_9285_1_2[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a304, 0x00000000, 0x00000000, 0x00006200, 0x00006200, 0x00000000 },
+ { 0x0000a308, 0x00000000, 0x00000000, 0x00008201, 0x00008201, 0x00000000 },
+ { 0x0000a30c, 0x00000000, 0x00000000, 0x0000b240, 0x0000b240, 0x00000000 },
+ { 0x0000a310, 0x00000000, 0x00000000, 0x0000d241, 0x0000d241, 0x00000000 },
+ { 0x0000a314, 0x00000000, 0x00000000, 0x0000f600, 0x0000f600, 0x00000000 },
+ { 0x0000a318, 0x00000000, 0x00000000, 0x00012800, 0x00012800, 0x00000000 },
+ { 0x0000a31c, 0x00000000, 0x00000000, 0x00016802, 0x00016802, 0x00000000 },
+ { 0x0000a320, 0x00000000, 0x00000000, 0x0001b805, 0x0001b805, 0x00000000 },
+ { 0x0000a324, 0x00000000, 0x00000000, 0x00021a80, 0x00021a80, 0x00000000 },
+ { 0x0000a328, 0x00000000, 0x00000000, 0x00028b00, 0x00028b00, 0x00000000 },
+ { 0x0000a32c, 0x00000000, 0x00000000, 0x0002ab40, 0x0002ab40, 0x00000000 },
+ { 0x0000a330, 0x00000000, 0x00000000, 0x0002cd80, 0x0002cd80, 0x00000000 },
+ { 0x0000a334, 0x00000000, 0x00000000, 0x00033d82, 0x00033d82, 0x00000000 },
+ { 0x0000a338, 0x0003891e, 0x0003891e, 0x0003891e, 0x0003891e, 0x00000000 },
+ { 0x0000a33c, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x00000000 },
+ { 0x0000a340, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a344, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a348, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a34c, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a350, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a354, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x00007838, 0xfac68803, 0xfac68803, 0xfac68803, 0xfac68803, 0xfac68803 },
+ { 0x0000786c, 0x08609ebe, 0x08609ebe, 0x08609ebe, 0x08609ebe, 0x08609ebe },
+ { 0x00007820, 0x00000c00, 0x00000c00, 0x00000c00, 0x00000c00, 0x00000c00 },
+ { 0x0000a274, 0x0a22a652, 0x0a22a652, 0x0a216652, 0x0a216652, 0x0a22a652 },
+ { 0x0000a278, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7 },
+ { 0x0000a27c, 0x050380e7, 0x050380e7, 0x050380e7, 0x050380e7, 0x050380e7 },
+ { 0x0000a394, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7 },
+ { 0x0000a398, 0x000000e7, 0x000000e7, 0x000000e7, 0x000000e7, 0x000000e7 },
+ { 0x0000a3dc, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7, 0x0e739ce7 },
+ { 0x0000a3e0, 0x000000e7, 0x000000e7, 0x000000e7, 0x000000e7, 0x000000e7 },
+};
+
+static const u_int32_t ar9285Modes_original_tx_gain_9285_1_2[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a304, 0x00000000, 0x00000000, 0x00009200, 0x00009200, 0x00000000 },
+ { 0x0000a308, 0x00000000, 0x00000000, 0x00010208, 0x00010208, 0x00000000 },
+ { 0x0000a30c, 0x00000000, 0x00000000, 0x00019608, 0x00019608, 0x00000000 },
+ { 0x0000a310, 0x00000000, 0x00000000, 0x00022618, 0x00022618, 0x00000000 },
+ { 0x0000a314, 0x00000000, 0x00000000, 0x0002a6c9, 0x0002a6c9, 0x00000000 },
+ { 0x0000a318, 0x00000000, 0x00000000, 0x00031710, 0x00031710, 0x00000000 },
+ { 0x0000a31c, 0x00000000, 0x00000000, 0x00035718, 0x00035718, 0x00000000 },
+ { 0x0000a320, 0x00000000, 0x00000000, 0x00038758, 0x00038758, 0x00000000 },
+ { 0x0000a324, 0x00000000, 0x00000000, 0x0003c75a, 0x0003c75a, 0x00000000 },
+ { 0x0000a328, 0x00000000, 0x00000000, 0x0004075c, 0x0004075c, 0x00000000 },
+ { 0x0000a32c, 0x00000000, 0x00000000, 0x0004475e, 0x0004475e, 0x00000000 },
+ { 0x0000a330, 0x00000000, 0x00000000, 0x0004679f, 0x0004679f, 0x00000000 },
+ { 0x0000a334, 0x00000000, 0x00000000, 0x000487df, 0x000487df, 0x00000000 },
+ { 0x0000a338, 0x0003891e, 0x0003891e, 0x0003891e, 0x0003891e, 0x00000000 },
+ { 0x0000a33c, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x00000000 },
+ { 0x0000a340, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a344, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a348, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a34c, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a350, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a354, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x00007838, 0xfac68801, 0xfac68801, 0xfac68801, 0xfac68801, 0xfac68801 },
+ { 0x0000786c, 0x48609eb4, 0x48609eb4, 0x48609eb4, 0x48609eb4, 0x48609eb4 },
+ { 0x00007820, 0x00000c04, 0x00000c04, 0x00000c04, 0x00000c04, 0x00000c04 },
+ { 0x0000a274, 0x0a21c652, 0x0a21c652, 0x0a21a652, 0x0a21a652, 0x0a22a652 },
+ { 0x0000a278, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c },
+ { 0x0000a27c, 0x050e039c, 0x050e039c, 0x050e039c, 0x050e039c, 0x050e039c },
+ { 0x0000a394, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c },
+ { 0x0000a398, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c },
+ { 0x0000a3dc, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c },
+ { 0x0000a3e0, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c },
+};
+
+static const u_int32_t ar9285PciePhy_clkreq_always_on_L1_9285_1_2[][2] = {
+ {0x00004040, 0x9248fd00 },
+ {0x00004040, 0x24924924 },
+ {0x00004040, 0xa8000019 },
+ {0x00004040, 0x13160820 },
+ {0x00004040, 0xe5980560 },
+ {0x00004040, 0xc01dcffd },
+ {0x00004040, 0x1aaabe41 },
+ {0x00004040, 0xbe105554 },
+ {0x00004040, 0x00043007 },
+ {0x00004044, 0x00000000 },
+};
+
+static const u_int32_t ar9285PciePhy_clkreq_off_L1_9285_1_2[][2] = {
+ {0x00004040, 0x9248fd00 },
+ {0x00004040, 0x24924924 },
+ {0x00004040, 0xa8000019 },
+ {0x00004040, 0x13160820 },
+ {0x00004040, 0xe5980560 },
+ {0x00004040, 0xc01dcffc },
+ {0x00004040, 0x1aaabe41 },
+ {0x00004040, 0xbe105554 },
+ {0x00004040, 0x00043007 },
+ {0x00004044, 0x00000000 },
+};
+
+/* AR9287 Revision 10 */
+static const u_int32_t ar9287Modes_9287_1_0[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x00001030, 0x00000000, 0x00000000, 0x000002c0, 0x00000160, 0x000001e0 },
+ { 0x00001070, 0x00000000, 0x00000000, 0x00000318, 0x0000018c, 0x000001e0 },
+ { 0x000010b0, 0x00000000, 0x00000000, 0x00007c70, 0x00003e38, 0x00001180 },
+ { 0x000010f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000008 },
+ { 0x00008014, 0x00000000, 0x00000000, 0x10801600, 0x08400b00, 0x06e006e0 },
+ { 0x0000801c, 0x00000000, 0x00000000, 0x12e00057, 0x12e0002b, 0x0988004f },
+ { 0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810, 0x08f04810 },
+ { 0x000081d0, 0x00003200, 0x00003200, 0x0000320a, 0x0000320a, 0x0000320a },
+ { 0x00008318, 0x00000000, 0x00000000, 0x00006880, 0x00003440, 0x00006880 },
+ { 0x00009804, 0x00000000, 0x00000000, 0x000003c4, 0x00000300, 0x00000303 },
+ { 0x00009820, 0x00000000, 0x00000000, 0x02020200, 0x02020200, 0x02020200 },
+ { 0x00009824, 0x00000000, 0x00000000, 0x01000e0e, 0x01000e0e, 0x01000e0e },
+ { 0x00009828, 0x00000000, 0x00000000, 0x0a020001, 0x0a020001, 0x0a020001 },
+ { 0x00009834, 0x00000000, 0x00000000, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+ { 0x00009838, 0x00000003, 0x00000003, 0x00000007, 0x00000007, 0x00000007 },
+ { 0x00009840, 0x206a002e, 0x206a002e, 0x206a012e, 0x206a012e, 0x206a012e },
+ { 0x00009844, 0x03720000, 0x03720000, 0x037216a0, 0x037216a0, 0x037216a0 },
+ { 0x00009850, 0x60000000, 0x60000000, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 },
+ { 0x00009858, 0x7c000d00, 0x7c000d00, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e },
+ { 0x0000985c, 0x3100005e, 0x3100005e, 0x3139605e, 0x31395d5e, 0x31395d5e },
+ { 0x00009860, 0x00058d00, 0x00058d00, 0x00058d20, 0x00058d20, 0x00058d18 },
+ { 0x00009864, 0x00000e00, 0x00000e00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+ { 0x00009868, 0x000040c0, 0x000040c0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
+ { 0x0000986c, 0x00000080, 0x00000080, 0x06903881, 0x06903881, 0x06903881 },
+ { 0x00009914, 0x00000000, 0x00000000, 0x00001130, 0x00000898, 0x000007d0 },
+ { 0x00009918, 0x00000000, 0x00000000, 0x00000016, 0x0000000b, 0x00000016 },
+ { 0x00009924, 0xd00a8a01, 0xd00a8a01, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+ { 0x00009944, 0xefbc0000, 0xefbc0000, 0xefbc1010, 0xefbc1010, 0xefbc1010 },
+ { 0x00009960, 0x00000000, 0x00000000, 0x00000010, 0x00000010, 0x00000010 },
+ { 0x0000a960, 0x00000000, 0x00000000, 0x00000010, 0x00000010, 0x00000010 },
+ { 0x00009964, 0x00000000, 0x00000000, 0x00000210, 0x00000210, 0x00000210 },
+ { 0x0000c968, 0x00000200, 0x00000200, 0x000003ce, 0x000003ce, 0x000003ce },
+ { 0x000099b8, 0x00000000, 0x00000000, 0x0000001c, 0x0000001c, 0x0000001c },
+ { 0x000099bc, 0x00000000, 0x00000000, 0x00000c00, 0x00000c00, 0x00000c00 },
+ { 0x000099c0, 0x00000000, 0x00000000, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+ { 0x0000a204, 0x00000440, 0x00000440, 0x00000444, 0x00000444, 0x00000444 },
+ { 0x0000a20c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000b20c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a21c, 0x1803800a, 0x1803800a, 0x1883800a, 0x1883800a, 0x1883800a },
+ { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+ { 0x0000a250, 0x00000000, 0x00000000, 0x0004a000, 0x0004a000, 0x0004a000 },
+ { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+ { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u_int32_t ar9287Common_9287_1_0[][2] = {
+ { 0x0000000c, 0x00000000 },
+ { 0x00000030, 0x00020015 },
+ { 0x00000034, 0x00000005 },
+ { 0x00000040, 0x00000000 },
+ { 0x00000044, 0x00000008 },
+ { 0x00000048, 0x00000008 },
+ { 0x0000004c, 0x00000010 },
+ { 0x00000050, 0x00000000 },
+ { 0x00000054, 0x0000001f },
+ { 0x00000800, 0x00000000 },
+ { 0x00000804, 0x00000000 },
+ { 0x00000808, 0x00000000 },
+ { 0x0000080c, 0x00000000 },
+ { 0x00000810, 0x00000000 },
+ { 0x00000814, 0x00000000 },
+ { 0x00000818, 0x00000000 },
+ { 0x0000081c, 0x00000000 },
+ { 0x00000820, 0x00000000 },
+ { 0x00000824, 0x00000000 },
+ { 0x00001040, 0x002ffc0f },
+ { 0x00001044, 0x002ffc0f },
+ { 0x00001048, 0x002ffc0f },
+ { 0x0000104c, 0x002ffc0f },
+ { 0x00001050, 0x002ffc0f },
+ { 0x00001054, 0x002ffc0f },
+ { 0x00001058, 0x002ffc0f },
+ { 0x0000105c, 0x002ffc0f },
+ { 0x00001060, 0x002ffc0f },
+ { 0x00001064, 0x002ffc0f },
+ { 0x00001230, 0x00000000 },
+ { 0x00001270, 0x00000000 },
+ { 0x00001038, 0x00000000 },
+ { 0x00001078, 0x00000000 },
+ { 0x000010b8, 0x00000000 },
+ { 0x000010f8, 0x00000000 },
+ { 0x00001138, 0x00000000 },
+ { 0x00001178, 0x00000000 },
+ { 0x000011b8, 0x00000000 },
+ { 0x000011f8, 0x00000000 },
+ { 0x00001238, 0x00000000 },
+ { 0x00001278, 0x00000000 },
+ { 0x000012b8, 0x00000000 },
+ { 0x000012f8, 0x00000000 },
+ { 0x00001338, 0x00000000 },
+ { 0x00001378, 0x00000000 },
+ { 0x000013b8, 0x00000000 },
+ { 0x000013f8, 0x00000000 },
+ { 0x00001438, 0x00000000 },
+ { 0x00001478, 0x00000000 },
+ { 0x000014b8, 0x00000000 },
+ { 0x000014f8, 0x00000000 },
+ { 0x00001538, 0x00000000 },
+ { 0x00001578, 0x00000000 },
+ { 0x000015b8, 0x00000000 },
+ { 0x000015f8, 0x00000000 },
+ { 0x00001638, 0x00000000 },
+ { 0x00001678, 0x00000000 },
+ { 0x000016b8, 0x00000000 },
+ { 0x000016f8, 0x00000000 },
+ { 0x00001738, 0x00000000 },
+ { 0x00001778, 0x00000000 },
+ { 0x000017b8, 0x00000000 },
+ { 0x000017f8, 0x00000000 },
+ { 0x0000103c, 0x00000000 },
+ { 0x0000107c, 0x00000000 },
+ { 0x000010bc, 0x00000000 },
+ { 0x000010fc, 0x00000000 },
+ { 0x0000113c, 0x00000000 },
+ { 0x0000117c, 0x00000000 },
+ { 0x000011bc, 0x00000000 },
+ { 0x000011fc, 0x00000000 },
+ { 0x0000123c, 0x00000000 },
+ { 0x0000127c, 0x00000000 },
+ { 0x000012bc, 0x00000000 },
+ { 0x000012fc, 0x00000000 },
+ { 0x0000133c, 0x00000000 },
+ { 0x0000137c, 0x00000000 },
+ { 0x000013bc, 0x00000000 },
+ { 0x000013fc, 0x00000000 },
+ { 0x0000143c, 0x00000000 },
+ { 0x0000147c, 0x00000000 },
+ { 0x00004030, 0x00000002 },
+ { 0x0000403c, 0x00000002 },
+ { 0x00004024, 0x0000001f },
+ { 0x00004060, 0x00000000 },
+ { 0x00004064, 0x00000000 },
+ { 0x00007010, 0x00000033 },
+ { 0x00007020, 0x00000000 },
+ { 0x00007034, 0x00000002 },
+ { 0x00007038, 0x000004c2 },
+ { 0x00008004, 0x00000000 },
+ { 0x00008008, 0x00000000 },
+ { 0x0000800c, 0x00000000 },
+ { 0x00008018, 0x00000700 },
+ { 0x00008020, 0x00000000 },
+ { 0x00008038, 0x00000000 },
+ { 0x0000803c, 0x00000000 },
+ { 0x00008048, 0x40000000 },
+ { 0x00008054, 0x00000000 },
+ { 0x00008058, 0x00000000 },
+ { 0x0000805c, 0x000fc78f },
+ { 0x00008060, 0x0000000f },
+ { 0x00008064, 0x00000000 },
+ { 0x00008070, 0x00000000 },
+ { 0x000080c0, 0x2a80001a },
+ { 0x000080c4, 0x05dc01e0 },
+ { 0x000080c8, 0x1f402710 },
+ { 0x000080cc, 0x01f40000 },
+ { 0x000080d0, 0x00001e00 },
+ { 0x000080d4, 0x00000000 },
+ { 0x000080d8, 0x00400000 },
+ { 0x000080e0, 0xffffffff },
+ { 0x000080e4, 0x0000ffff },
+ { 0x000080e8, 0x003f3f3f },
+ { 0x000080ec, 0x00000000 },
+ { 0x000080f0, 0x00000000 },
+ { 0x000080f4, 0x00000000 },
+ { 0x000080f8, 0x00000000 },
+ { 0x000080fc, 0x00020000 },
+ { 0x00008100, 0x00020000 },
+ { 0x00008104, 0x00000001 },
+ { 0x00008108, 0x00000052 },
+ { 0x0000810c, 0x00000000 },
+ { 0x00008110, 0x00000168 },
+ { 0x00008118, 0x000100aa },
+ { 0x0000811c, 0x00003210 },
+ { 0x00008124, 0x00000000 },
+ { 0x00008128, 0x00000000 },
+ { 0x0000812c, 0x00000000 },
+ { 0x00008130, 0x00000000 },
+ { 0x00008134, 0x00000000 },
+ { 0x00008138, 0x00000000 },
+ { 0x0000813c, 0x00000000 },
+ { 0x00008144, 0xffffffff },
+ { 0x00008168, 0x00000000 },
+ { 0x0000816c, 0x00000000 },
+ { 0x00008170, 0x18487320 },
+ { 0x00008174, 0xfaa4fa50 },
+ { 0x00008178, 0x00000100 },
+ { 0x0000817c, 0x00000000 },
+ { 0x000081c0, 0x00000000 },
+ { 0x000081c4, 0x00000000 },
+ { 0x000081d4, 0x00000000 },
+ { 0x000081ec, 0x00000000 },
+ { 0x000081f0, 0x00000000 },
+ { 0x000081f4, 0x00000000 },
+ { 0x000081f8, 0x00000000 },
+ { 0x000081fc, 0x00000000 },
+ { 0x00008200, 0x00000000 },
+ { 0x00008204, 0x00000000 },
+ { 0x00008208, 0x00000000 },
+ { 0x0000820c, 0x00000000 },
+ { 0x00008210, 0x00000000 },
+ { 0x00008214, 0x00000000 },
+ { 0x00008218, 0x00000000 },
+ { 0x0000821c, 0x00000000 },
+ { 0x00008220, 0x00000000 },
+ { 0x00008224, 0x00000000 },
+ { 0x00008228, 0x00000000 },
+ { 0x0000822c, 0x00000000 },
+ { 0x00008230, 0x00000000 },
+ { 0x00008234, 0x00000000 },
+ { 0x00008238, 0x00000000 },
+ { 0x0000823c, 0x00000000 },
+ { 0x00008240, 0x00100000 },
+ { 0x00008244, 0x0010f400 },
+ { 0x00008248, 0x00000100 },
+ { 0x0000824c, 0x0001e800 },
+ { 0x00008250, 0x00000000 },
+ { 0x00008254, 0x00000000 },
+ { 0x00008258, 0x00000000 },
+ { 0x0000825c, 0x400000ff },
+ { 0x00008260, 0x00080922 },
+ { 0x00008264, 0xa8a00010 },
+ { 0x00008270, 0x00000000 },
+ { 0x00008274, 0x40000000 },
+ { 0x00008278, 0x003e4180 },
+ { 0x0000827c, 0x00000000 },
+ { 0x00008284, 0x0000002c },
+ { 0x00008288, 0x0000002c },
+ { 0x0000828c, 0x000000ff },
+ { 0x00008294, 0x00000000 },
+ { 0x00008298, 0x00000000 },
+ { 0x0000829c, 0x00000000 },
+ { 0x00008300, 0x00000040 },
+ { 0x00008314, 0x00000000 },
+ { 0x00008328, 0x00000000 },
+ { 0x0000832c, 0x00000007 },
+ { 0x00008330, 0x00000302 },
+ { 0x00008334, 0x00000e00 },
+ { 0x00008338, 0x00ff0000 },
+ { 0x0000833c, 0x00000000 },
+ { 0x00008340, 0x000107ff },
+ { 0x00008344, 0x01c81043 },
+ { 0x00008360, 0xffffffff },
+ { 0x00008364, 0xffffffff },
+ { 0x00008368, 0x00000000 },
+ { 0x00008370, 0x00000000 },
+ { 0x00008374, 0x000000ff },
+ { 0x00008378, 0x00000000 },
+ { 0x0000837c, 0x00000000 },
+ { 0x00008380, 0xffffffff },
+ { 0x00008384, 0xffffffff },
+ { 0x00008390, 0x0fffffff },
+ { 0x00008394, 0x0fffffff },
+ { 0x00008398, 0x00000000 },
+ { 0x0000839c, 0x00000000 },
+ { 0x000083a0, 0x00000000 },
+ { 0x00009808, 0x00000000 },
+ { 0x0000980c, 0xafe68e30 },
+ { 0x00009810, 0xfd14e000 },
+ { 0x00009814, 0x9c0a9f6b },
+ { 0x0000981c, 0x00000000 },
+ { 0x0000982c, 0x0000a000 },
+ { 0x00009830, 0x00000000 },
+ { 0x0000983c, 0x00200400 },
+ { 0x0000984c, 0x0040233c },
+ { 0x0000a84c, 0x0040233c },
+ { 0x00009854, 0x00000044 },
+ { 0x00009900, 0x00000000 },
+ { 0x00009904, 0x00000000 },
+ { 0x00009908, 0x00000000 },
+ { 0x0000990c, 0x00000000 },
+ { 0x00009910, 0x10002310 },
+ { 0x0000991c, 0x10000fff },
+ { 0x00009920, 0x04900000 },
+ { 0x0000a920, 0x04900000 },
+ { 0x00009928, 0x00000001 },
+ { 0x0000992c, 0x00000004 },
+ { 0x00009930, 0x00000000 },
+ { 0x0000a930, 0x00000000 },
+ { 0x00009934, 0x1e1f2022 },
+ { 0x00009938, 0x0a0b0c0d },
+ { 0x0000993c, 0x00000000 },
+ { 0x00009948, 0x9280c00a },
+ { 0x0000994c, 0x00020028 },
+ { 0x00009954, 0x5f3ca3de },
+ { 0x00009958, 0x0108ecff },
+ { 0x00009940, 0x14750604 },
+ { 0x0000c95c, 0x004b6a8e },
+ { 0x00009970, 0x990bb515 },
+ { 0x00009974, 0x00000000 },
+ { 0x00009978, 0x00000001 },
+ { 0x0000997c, 0x00000000 },
+ { 0x000099a0, 0x00000000 },
+ { 0x000099a4, 0x00000001 },
+ { 0x000099a8, 0x201fff00 },
+ { 0x000099ac, 0x0c6f0000 },
+ { 0x000099b0, 0x03051000 },
+ { 0x000099b4, 0x00000820 },
+ { 0x000099c4, 0x06336f77 },
+ { 0x000099c8, 0x6af65329 },
+ { 0x000099cc, 0x08f186c8 },
+ { 0x000099d0, 0x00046384 },
+ { 0x000099dc, 0x00000000 },
+ { 0x000099e0, 0x00000000 },
+ { 0x000099e4, 0xaaaaaaaa },
+ { 0x000099e8, 0x3c466478 },
+ { 0x000099ec, 0x0cc80caa },
+ { 0x000099f0, 0x00000000 },
+ { 0x000099fc, 0x00001042 },
+ { 0x0000a1f4, 0x00fffeff },
+ { 0x0000a1f8, 0x00f5f9ff },
+ { 0x0000a1fc, 0xb79f6427 },
+ { 0x0000a208, 0x803e4788 },
+ { 0x0000a210, 0x4080a333 },
+ { 0x0000a214, 0x40206c10 },
+ { 0x0000a218, 0x009c4060 },
+ { 0x0000a220, 0x01834061 },
+ { 0x0000a224, 0x00000400 },
+ { 0x0000a228, 0x000003b5 },
+ { 0x0000a22c, 0x233f7180 },
+ { 0x0000a234, 0x20202020 },
+ { 0x0000a238, 0x20202020 },
+ { 0x0000a23c, 0x13c889af },
+ { 0x0000a240, 0x38490a20 },
+ { 0x0000a244, 0x00000000 },
+ { 0x0000a248, 0xfffffffc },
+ { 0x0000a24c, 0x00000000 },
+ { 0x0000a254, 0x00000000 },
+ { 0x0000a258, 0x0cdbd380 },
+ { 0x0000a25c, 0x0f0f0f01 },
+ { 0x0000a260, 0xdfa91f01 },
+ { 0x0000a264, 0x00418a11 },
+ { 0x0000b264, 0x00418a11 },
+ { 0x0000a268, 0x00000000 },
+ { 0x0000a26c, 0x0e79e5c6 },
+ { 0x0000b26c, 0x0e79e5c6 },
+ { 0x0000d270, 0x00820820 },
+ { 0x0000a278, 0x1ce739ce },
+ { 0x0000a27c, 0x050701ce },
+ { 0x0000d35c, 0x07ffffef },
+ { 0x0000d360, 0x0fffffe7 },
+ { 0x0000d364, 0x17ffffe5 },
+ { 0x0000d368, 0x1fffffe4 },
+ { 0x0000d36c, 0x37ffffe3 },
+ { 0x0000d370, 0x3fffffe3 },
+ { 0x0000d374, 0x57ffffe3 },
+ { 0x0000d378, 0x5fffffe2 },
+ { 0x0000d37c, 0x7fffffe2 },
+ { 0x0000d380, 0x7f3c7bba },
+ { 0x0000d384, 0xf3307ff0 },
+ { 0x0000a388, 0x0c000000 },
+ { 0x0000a38c, 0x20202020 },
+ { 0x0000a390, 0x20202020 },
+ { 0x0000a394, 0x1ce739ce },
+ { 0x0000a398, 0x000001ce },
+ { 0x0000b398, 0x000001ce },
+ { 0x0000a39c, 0x00000001 },
+ { 0x0000a3c8, 0x00000246 },
+ { 0x0000a3cc, 0x20202020 },
+ { 0x0000a3d0, 0x20202020 },
+ { 0x0000a3d4, 0x20202020 },
+ { 0x0000a3dc, 0x1ce739ce },
+ { 0x0000a3e0, 0x000001ce },
+ { 0x0000a3e4, 0x00000000 },
+ { 0x0000a3e8, 0x18c43433 },
+ { 0x0000a3ec, 0x00f70081 },
+ { 0x0000a3f0, 0x01036a1e },
+ { 0x0000a3f4, 0x00000000 },
+ { 0x0000b3f4, 0x00000000 },
+ { 0x0000a7d8, 0x00000001 },
+ { 0x00007800, 0x00000800 },
+ { 0x00007804, 0x6c35ffb0 },
+ { 0x00007808, 0x6db6c000 },
+ { 0x0000780c, 0x6db6cb30 },
+ { 0x00007810, 0x6db6cb6c },
+ { 0x00007814, 0x0501e200 },
+ { 0x00007818, 0x0094128d },
+ { 0x0000781c, 0x976ee392 },
+ { 0x00007820, 0xf75ff6fc },
+ { 0x00007824, 0x00040000 },
+ { 0x00007828, 0xdb003012 },
+ { 0x0000782c, 0x04924914 },
+ { 0x00007830, 0x21084210 },
+ { 0x00007834, 0x00140000 },
+ { 0x00007838, 0x0e4548d8 },
+ { 0x0000783c, 0x54214514 },
+ { 0x00007840, 0x02025820 },
+ { 0x00007844, 0x71c0d388 },
+ { 0x00007848, 0x934934a8 },
+ { 0x00007850, 0x00000000 },
+ { 0x00007854, 0x00000800 },
+ { 0x00007858, 0x6c35ffb0 },
+ { 0x0000785c, 0x6db6c000 },
+ { 0x00007860, 0x6db6cb2c },
+ { 0x00007864, 0x6db6cb6c },
+ { 0x00007868, 0x0501e200 },
+ { 0x0000786c, 0x0094128d },
+ { 0x00007870, 0x976ee392 },
+ { 0x00007874, 0xf75ff6fc },
+ { 0x00007878, 0x00040000 },
+ { 0x0000787c, 0xdb003012 },
+ { 0x00007880, 0x04924914 },
+ { 0x00007884, 0x21084210 },
+ { 0x00007888, 0x001b6db0 },
+ { 0x0000788c, 0x00376b63 },
+ { 0x00007890, 0x06db6db6 },
+ { 0x00007894, 0x006d8000 },
+ { 0x00007898, 0x48100000 },
+ { 0x0000789c, 0x00000000 },
+ { 0x000078a0, 0x08000000 },
+ { 0x000078a4, 0x0007ffd8 },
+ { 0x000078a8, 0x0007ffd8 },
+ { 0x000078ac, 0x001c0020 },
+ { 0x000078b0, 0x000611eb },
+ { 0x000078b4, 0x40008080 },
+ { 0x000078b8, 0x2a850160 },
+};
+
+static const u_int32_t ar9287Modes_tx_gain_9287_1_0[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a304, 0x00000000, 0x00000000, 0x00004002, 0x00004002, 0x00004002 },
+ { 0x0000a308, 0x00000000, 0x00000000, 0x00008004, 0x00008004, 0x00008004 },
+ { 0x0000a30c, 0x00000000, 0x00000000, 0x0000c00a, 0x0000c00a, 0x0000c00a },
+ { 0x0000a310, 0x00000000, 0x00000000, 0x0001000c, 0x0001000c, 0x0001000c },
+ { 0x0000a314, 0x00000000, 0x00000000, 0x0001420b, 0x0001420b, 0x0001420b },
+ { 0x0000a318, 0x00000000, 0x00000000, 0x0001824a, 0x0001824a, 0x0001824a },
+ { 0x0000a31c, 0x00000000, 0x00000000, 0x0001c44a, 0x0001c44a, 0x0001c44a },
+ { 0x0000a320, 0x00000000, 0x00000000, 0x0002064a, 0x0002064a, 0x0002064a },
+ { 0x0000a324, 0x00000000, 0x00000000, 0x0002484a, 0x0002484a, 0x0002484a },
+ { 0x0000a328, 0x00000000, 0x00000000, 0x00028a4a, 0x00028a4a, 0x00028a4a },
+ { 0x0000a32c, 0x00000000, 0x00000000, 0x0002cc4a, 0x0002cc4a, 0x0002cc4a },
+ { 0x0000a330, 0x00000000, 0x00000000, 0x00030e4a, 0x00030e4a, 0x00030e4a },
+ { 0x0000a334, 0x00000000, 0x00000000, 0x00034e8a, 0x00034e8a, 0x00034e8a },
+ { 0x0000a338, 0x00000000, 0x00000000, 0x00038e8c, 0x00038e8c, 0x00038e8c },
+ { 0x0000a33c, 0x00000000, 0x00000000, 0x0003cecc, 0x0003cecc, 0x0003cecc },
+ { 0x0000a340, 0x00000000, 0x00000000, 0x00040ed4, 0x00040ed4, 0x00040ed4 },
+ { 0x0000a344, 0x00000000, 0x00000000, 0x00044edc, 0x00044edc, 0x00044edc },
+ { 0x0000a348, 0x00000000, 0x00000000, 0x00048ede, 0x00048ede, 0x00048ede },
+ { 0x0000a34c, 0x00000000, 0x00000000, 0x0004cf1e, 0x0004cf1e, 0x0004cf1e },
+ { 0x0000a350, 0x00000000, 0x00000000, 0x00050f5e, 0x00050f5e, 0x00050f5e },
+ { 0x0000a354, 0x00000000, 0x00000000, 0x00054f9e, 0x00054f9e, 0x00054f9e },
+ { 0x0000a780, 0x00000000, 0x00000000, 0x00000060, 0x00000060, 0x00000060 },
+ { 0x0000a784, 0x00000000, 0x00000000, 0x00004062, 0x00004062, 0x00004062 },
+ { 0x0000a788, 0x00000000, 0x00000000, 0x00008064, 0x00008064, 0x00008064 },
+ { 0x0000a78c, 0x00000000, 0x00000000, 0x0000c0a4, 0x0000c0a4, 0x0000c0a4 },
+ { 0x0000a790, 0x00000000, 0x00000000, 0x000100b0, 0x000100b0, 0x000100b0 },
+ { 0x0000a794, 0x00000000, 0x00000000, 0x000140b2, 0x000140b2, 0x000140b2 },
+ { 0x0000a798, 0x00000000, 0x00000000, 0x000180b4, 0x000180b4, 0x000180b4 },
+ { 0x0000a79c, 0x00000000, 0x00000000, 0x0001c0f4, 0x0001c0f4, 0x0001c0f4 },
+ { 0x0000a7a0, 0x00000000, 0x00000000, 0x00020134, 0x00020134, 0x00020134 },
+ { 0x0000a7a4, 0x00000000, 0x00000000, 0x000240fe, 0x000240fe, 0x000240fe },
+ { 0x0000a7a8, 0x00000000, 0x00000000, 0x0002813e, 0x0002813e, 0x0002813e },
+ { 0x0000a7ac, 0x00000000, 0x00000000, 0x0002c17e, 0x0002c17e, 0x0002c17e },
+ { 0x0000a7b0, 0x00000000, 0x00000000, 0x000301be, 0x000301be, 0x000301be },
+ { 0x0000a7b4, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7b8, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7bc, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7c0, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7c4, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7c8, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7cc, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7d0, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a7d4, 0x00000000, 0x00000000, 0x000341fe, 0x000341fe, 0x000341fe },
+ { 0x0000a274, 0x0a180000, 0x0a180000, 0x0a1aa000, 0x0a1aa000, 0x0a1aa000 },
+};
+
+
+static const u_int32_t ar9287Modes_rx_gain_9287_1_0[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x00009a00, 0x00000000, 0x00000000, 0x0000a120, 0x0000a120, 0x0000a120 },
+ { 0x00009a04, 0x00000000, 0x00000000, 0x0000a124, 0x0000a124, 0x0000a124 },
+ { 0x00009a08, 0x00000000, 0x00000000, 0x0000a128, 0x0000a128, 0x0000a128 },
+ { 0x00009a0c, 0x00000000, 0x00000000, 0x0000a12c, 0x0000a12c, 0x0000a12c },
+ { 0x00009a10, 0x00000000, 0x00000000, 0x0000a130, 0x0000a130, 0x0000a130 },
+ { 0x00009a14, 0x00000000, 0x00000000, 0x0000a194, 0x0000a194, 0x0000a194 },
+ { 0x00009a18, 0x00000000, 0x00000000, 0x0000a198, 0x0000a198, 0x0000a198 },
+ { 0x00009a1c, 0x00000000, 0x00000000, 0x0000a20c, 0x0000a20c, 0x0000a20c },
+ { 0x00009a20, 0x00000000, 0x00000000, 0x0000a210, 0x0000a210, 0x0000a210 },
+ { 0x00009a24, 0x00000000, 0x00000000, 0x0000a284, 0x0000a284, 0x0000a284 },
+ { 0x00009a28, 0x00000000, 0x00000000, 0x0000a288, 0x0000a288, 0x0000a288 },
+ { 0x00009a2c, 0x00000000, 0x00000000, 0x0000a28c, 0x0000a28c, 0x0000a28c },
+ { 0x00009a30, 0x00000000, 0x00000000, 0x0000a290, 0x0000a290, 0x0000a290 },
+ { 0x00009a34, 0x00000000, 0x00000000, 0x0000a294, 0x0000a294, 0x0000a294 },
+ { 0x00009a38, 0x00000000, 0x00000000, 0x0000a2a0, 0x0000a2a0, 0x0000a2a0 },
+ { 0x00009a3c, 0x00000000, 0x00000000, 0x0000a2a4, 0x0000a2a4, 0x0000a2a4 },
+ { 0x00009a40, 0x00000000, 0x00000000, 0x0000a2a8, 0x0000a2a8, 0x0000a2a8 },
+ { 0x00009a44, 0x00000000, 0x00000000, 0x0000a2ac, 0x0000a2ac, 0x0000a2ac },
+ { 0x00009a48, 0x00000000, 0x00000000, 0x0000a2b0, 0x0000a2b0, 0x0000a2b0 },
+ { 0x00009a4c, 0x00000000, 0x00000000, 0x0000a2b4, 0x0000a2b4, 0x0000a2b4 },
+ { 0x00009a50, 0x00000000, 0x00000000, 0x0000a2b8, 0x0000a2b8, 0x0000a2b8 },
+ { 0x00009a54, 0x00000000, 0x00000000, 0x0000a2c4, 0x0000a2c4, 0x0000a2c4 },
+ { 0x00009a58, 0x00000000, 0x00000000, 0x0000a708, 0x0000a708, 0x0000a708 },
+ { 0x00009a5c, 0x00000000, 0x00000000, 0x0000a70c, 0x0000a70c, 0x0000a70c },
+ { 0x00009a60, 0x00000000, 0x00000000, 0x0000a710, 0x0000a710, 0x0000a710 },
+ { 0x00009a64, 0x00000000, 0x00000000, 0x0000ab04, 0x0000ab04, 0x0000ab04 },
+ { 0x00009a68, 0x00000000, 0x00000000, 0x0000ab08, 0x0000ab08, 0x0000ab08 },
+ { 0x00009a6c, 0x00000000, 0x00000000, 0x0000ab0c, 0x0000ab0c, 0x0000ab0c },
+ { 0x00009a70, 0x00000000, 0x00000000, 0x0000ab10, 0x0000ab10, 0x0000ab10 },
+ { 0x00009a74, 0x00000000, 0x00000000, 0x0000ab14, 0x0000ab14, 0x0000ab14 },
+ { 0x00009a78, 0x00000000, 0x00000000, 0x0000ab18, 0x0000ab18, 0x0000ab18 },
+ { 0x00009a7c, 0x00000000, 0x00000000, 0x0000ab8c, 0x0000ab8c, 0x0000ab8c },
+ { 0x00009a80, 0x00000000, 0x00000000, 0x0000ab90, 0x0000ab90, 0x0000ab90 },
+ { 0x00009a84, 0x00000000, 0x00000000, 0x0000ab94, 0x0000ab94, 0x0000ab94 },
+ { 0x00009a88, 0x00000000, 0x00000000, 0x0000ab98, 0x0000ab98, 0x0000ab98 },
+ { 0x00009a8c, 0x00000000, 0x00000000, 0x0000aba4, 0x0000aba4, 0x0000aba4 },
+ { 0x00009a90, 0x00000000, 0x00000000, 0x0000aba8, 0x0000aba8, 0x0000aba8 },
+ { 0x00009a94, 0x00000000, 0x00000000, 0x0000cb04, 0x0000cb04, 0x0000cb04 },
+ { 0x00009a98, 0x00000000, 0x00000000, 0x0000cb08, 0x0000cb08, 0x0000cb08 },
+ { 0x00009a9c, 0x00000000, 0x00000000, 0x0000cb0c, 0x0000cb0c, 0x0000cb0c },
+ { 0x00009aa0, 0x00000000, 0x00000000, 0x0000cb10, 0x0000cb10, 0x0000cb10 },
+ { 0x00009aa4, 0x00000000, 0x00000000, 0x0000cb14, 0x0000cb14, 0x0000cb14 },
+ { 0x00009aa8, 0x00000000, 0x00000000, 0x0000cb18, 0x0000cb18, 0x0000cb18 },
+ { 0x00009aac, 0x00000000, 0x00000000, 0x0000cb8c, 0x0000cb8c, 0x0000cb8c },
+ { 0x00009ab0, 0x00000000, 0x00000000, 0x0000cb90, 0x0000cb90, 0x0000cb90 },
+ { 0x00009ab4, 0x00000000, 0x00000000, 0x0000cf18, 0x0000cf18, 0x0000cf18 },
+ { 0x00009ab8, 0x00000000, 0x00000000, 0x0000cf24, 0x0000cf24, 0x0000cf24 },
+ { 0x00009abc, 0x00000000, 0x00000000, 0x0000cf28, 0x0000cf28, 0x0000cf28 },
+ { 0x00009ac0, 0x00000000, 0x00000000, 0x0000d314, 0x0000d314, 0x0000d314 },
+ { 0x00009ac4, 0x00000000, 0x00000000, 0x0000d318, 0x0000d318, 0x0000d318 },
+ { 0x00009ac8, 0x00000000, 0x00000000, 0x0000d38c, 0x0000d38c, 0x0000d38c },
+ { 0x00009acc, 0x00000000, 0x00000000, 0x0000d390, 0x0000d390, 0x0000d390 },
+ { 0x00009ad0, 0x00000000, 0x00000000, 0x0000d394, 0x0000d394, 0x0000d394 },
+ { 0x00009ad4, 0x00000000, 0x00000000, 0x0000d398, 0x0000d398, 0x0000d398 },
+ { 0x00009ad8, 0x00000000, 0x00000000, 0x0000d3a4, 0x0000d3a4, 0x0000d3a4 },
+ { 0x00009adc, 0x00000000, 0x00000000, 0x0000d3a8, 0x0000d3a8, 0x0000d3a8 },
+ { 0x00009ae0, 0x00000000, 0x00000000, 0x0000d3ac, 0x0000d3ac, 0x0000d3ac },
+ { 0x00009ae4, 0x00000000, 0x00000000, 0x0000d3b0, 0x0000d3b0, 0x0000d3b0 },
+ { 0x00009ae8, 0x00000000, 0x00000000, 0x0000f380, 0x0000f380, 0x0000f380 },
+ { 0x00009aec, 0x00000000, 0x00000000, 0x0000f384, 0x0000f384, 0x0000f384 },
+ { 0x00009af0, 0x00000000, 0x00000000, 0x0000f388, 0x0000f388, 0x0000f388 },
+ { 0x00009af4, 0x00000000, 0x00000000, 0x0000f710, 0x0000f710, 0x0000f710 },
+ { 0x00009af8, 0x00000000, 0x00000000, 0x0000f714, 0x0000f714, 0x0000f714 },
+ { 0x00009afc, 0x00000000, 0x00000000, 0x0000f718, 0x0000f718, 0x0000f718 },
+ { 0x00009b00, 0x00000000, 0x00000000, 0x0000fb10, 0x0000fb10, 0x0000fb10 },
+ { 0x00009b04, 0x00000000, 0x00000000, 0x0000fb14, 0x0000fb14, 0x0000fb14 },
+ { 0x00009b08, 0x00000000, 0x00000000, 0x0000fb18, 0x0000fb18, 0x0000fb18 },
+ { 0x00009b0c, 0x00000000, 0x00000000, 0x0000fb8c, 0x0000fb8c, 0x0000fb8c },
+ { 0x00009b10, 0x00000000, 0x00000000, 0x0000fb90, 0x0000fb90, 0x0000fb90 },
+ { 0x00009b14, 0x00000000, 0x00000000, 0x0000fb94, 0x0000fb94, 0x0000fb94 },
+ { 0x00009b18, 0x00000000, 0x00000000, 0x0000ff8c, 0x0000ff8c, 0x0000ff8c },
+ { 0x00009b1c, 0x00000000, 0x00000000, 0x0000ff90, 0x0000ff90, 0x0000ff90 },
+ { 0x00009b20, 0x00000000, 0x00000000, 0x0000ff94, 0x0000ff94, 0x0000ff94 },
+ { 0x00009b24, 0x00000000, 0x00000000, 0x0000ffa0, 0x0000ffa0, 0x0000ffa0 },
+ { 0x00009b28, 0x00000000, 0x00000000, 0x0000ffa4, 0x0000ffa4, 0x0000ffa4 },
+ { 0x00009b2c, 0x00000000, 0x00000000, 0x0000ffa8, 0x0000ffa8, 0x0000ffa8 },
+ { 0x00009b30, 0x00000000, 0x00000000, 0x0000ffac, 0x0000ffac, 0x0000ffac },
+ { 0x00009b34, 0x00000000, 0x00000000, 0x0000ffb0, 0x0000ffb0, 0x0000ffb0 },
+ { 0x00009b38, 0x00000000, 0x00000000, 0x0000ffb4, 0x0000ffb4, 0x0000ffb4 },
+ { 0x00009b3c, 0x00000000, 0x00000000, 0x0000ffa1, 0x0000ffa1, 0x0000ffa1 },
+ { 0x00009b40, 0x00000000, 0x00000000, 0x0000ffa5, 0x0000ffa5, 0x0000ffa5 },
+ { 0x00009b44, 0x00000000, 0x00000000, 0x0000ffa9, 0x0000ffa9, 0x0000ffa9 },
+ { 0x00009b48, 0x00000000, 0x00000000, 0x0000ffad, 0x0000ffad, 0x0000ffad },
+ { 0x00009b4c, 0x00000000, 0x00000000, 0x0000ffb1, 0x0000ffb1, 0x0000ffb1 },
+ { 0x00009b50, 0x00000000, 0x00000000, 0x0000ffb5, 0x0000ffb5, 0x0000ffb5 },
+ { 0x00009b54, 0x00000000, 0x00000000, 0x0000ffb9, 0x0000ffb9, 0x0000ffb9 },
+ { 0x00009b58, 0x00000000, 0x00000000, 0x0000ffc5, 0x0000ffc5, 0x0000ffc5 },
+ { 0x00009b5c, 0x00000000, 0x00000000, 0x0000ffc9, 0x0000ffc9, 0x0000ffc9 },
+ { 0x00009b60, 0x00000000, 0x00000000, 0x0000ffcd, 0x0000ffcd, 0x0000ffcd },
+ { 0x00009b64, 0x00000000, 0x00000000, 0x0000ffd1, 0x0000ffd1, 0x0000ffd1 },
+ { 0x00009b68, 0x00000000, 0x00000000, 0x0000ffd5, 0x0000ffd5, 0x0000ffd5 },
+ { 0x00009b6c, 0x00000000, 0x00000000, 0x0000ffc2, 0x0000ffc2, 0x0000ffc2 },
+ { 0x00009b70, 0x00000000, 0x00000000, 0x0000ffc6, 0x0000ffc6, 0x0000ffc6 },
+ { 0x00009b74, 0x00000000, 0x00000000, 0x0000ffca, 0x0000ffca, 0x0000ffca },
+ { 0x00009b78, 0x00000000, 0x00000000, 0x0000ffce, 0x0000ffce, 0x0000ffce },
+ { 0x00009b7c, 0x00000000, 0x00000000, 0x0000ffd2, 0x0000ffd2, 0x0000ffd2 },
+ { 0x00009b80, 0x00000000, 0x00000000, 0x0000ffd6, 0x0000ffd6, 0x0000ffd6 },
+ { 0x00009b84, 0x00000000, 0x00000000, 0x0000ffda, 0x0000ffda, 0x0000ffda },
+ { 0x00009b88, 0x00000000, 0x00000000, 0x0000ffc7, 0x0000ffc7, 0x0000ffc7 },
+ { 0x00009b8c, 0x00000000, 0x00000000, 0x0000ffcb, 0x0000ffcb, 0x0000ffcb },
+ { 0x00009b90, 0x00000000, 0x00000000, 0x0000ffcf, 0x0000ffcf, 0x0000ffcf },
+ { 0x00009b94, 0x00000000, 0x00000000, 0x0000ffd3, 0x0000ffd3, 0x0000ffd3 },
+ { 0x00009b98, 0x00000000, 0x00000000, 0x0000ffd7, 0x0000ffd7, 0x0000ffd7 },
+ { 0x00009b9c, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009ba0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009ba4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009ba8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bac, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bb0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bb4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bb8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bbc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bc0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bc4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bc8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bcc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bd0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bd4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bd8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bdc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009be0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009be4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009be8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bec, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bf0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bf4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bf8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bfc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aa00, 0x00000000, 0x00000000, 0x0000a120, 0x0000a120, 0x0000a120 },
+ { 0x0000aa04, 0x00000000, 0x00000000, 0x0000a124, 0x0000a124, 0x0000a124 },
+ { 0x0000aa08, 0x00000000, 0x00000000, 0x0000a128, 0x0000a128, 0x0000a128 },
+ { 0x0000aa0c, 0x00000000, 0x00000000, 0x0000a12c, 0x0000a12c, 0x0000a12c },
+ { 0x0000aa10, 0x00000000, 0x00000000, 0x0000a130, 0x0000a130, 0x0000a130 },
+ { 0x0000aa14, 0x00000000, 0x00000000, 0x0000a194, 0x0000a194, 0x0000a194 },
+ { 0x0000aa18, 0x00000000, 0x00000000, 0x0000a198, 0x0000a198, 0x0000a198 },
+ { 0x0000aa1c, 0x00000000, 0x00000000, 0x0000a20c, 0x0000a20c, 0x0000a20c },
+ { 0x0000aa20, 0x00000000, 0x00000000, 0x0000a210, 0x0000a210, 0x0000a210 },
+ { 0x0000aa24, 0x00000000, 0x00000000, 0x0000a284, 0x0000a284, 0x0000a284 },
+ { 0x0000aa28, 0x00000000, 0x00000000, 0x0000a288, 0x0000a288, 0x0000a288 },
+ { 0x0000aa2c, 0x00000000, 0x00000000, 0x0000a28c, 0x0000a28c, 0x0000a28c },
+ { 0x0000aa30, 0x00000000, 0x00000000, 0x0000a290, 0x0000a290, 0x0000a290 },
+ { 0x0000aa34, 0x00000000, 0x00000000, 0x0000a294, 0x0000a294, 0x0000a294 },
+ { 0x0000aa38, 0x00000000, 0x00000000, 0x0000a2a0, 0x0000a2a0, 0x0000a2a0 },
+ { 0x0000aa3c, 0x00000000, 0x00000000, 0x0000a2a4, 0x0000a2a4, 0x0000a2a4 },
+ { 0x0000aa40, 0x00000000, 0x00000000, 0x0000a2a8, 0x0000a2a8, 0x0000a2a8 },
+ { 0x0000aa44, 0x00000000, 0x00000000, 0x0000a2ac, 0x0000a2ac, 0x0000a2ac },
+ { 0x0000aa48, 0x00000000, 0x00000000, 0x0000a2b0, 0x0000a2b0, 0x0000a2b0 },
+ { 0x0000aa4c, 0x00000000, 0x00000000, 0x0000a2b4, 0x0000a2b4, 0x0000a2b4 },
+ { 0x0000aa50, 0x00000000, 0x00000000, 0x0000a2b8, 0x0000a2b8, 0x0000a2b8 },
+ { 0x0000aa54, 0x00000000, 0x00000000, 0x0000a2c4, 0x0000a2c4, 0x0000a2c4 },
+ { 0x0000aa58, 0x00000000, 0x00000000, 0x0000a708, 0x0000a708, 0x0000a708 },
+ { 0x0000aa5c, 0x00000000, 0x00000000, 0x0000a70c, 0x0000a70c, 0x0000a70c },
+ { 0x0000aa60, 0x00000000, 0x00000000, 0x0000a710, 0x0000a710, 0x0000a710 },
+ { 0x0000aa64, 0x00000000, 0x00000000, 0x0000ab04, 0x0000ab04, 0x0000ab04 },
+ { 0x0000aa68, 0x00000000, 0x00000000, 0x0000ab08, 0x0000ab08, 0x0000ab08 },
+ { 0x0000aa6c, 0x00000000, 0x00000000, 0x0000ab0c, 0x0000ab0c, 0x0000ab0c },
+ { 0x0000aa70, 0x00000000, 0x00000000, 0x0000ab10, 0x0000ab10, 0x0000ab10 },
+ { 0x0000aa74, 0x00000000, 0x00000000, 0x0000ab14, 0x0000ab14, 0x0000ab14 },
+ { 0x0000aa78, 0x00000000, 0x00000000, 0x0000ab18, 0x0000ab18, 0x0000ab18 },
+ { 0x0000aa7c, 0x00000000, 0x00000000, 0x0000ab8c, 0x0000ab8c, 0x0000ab8c },
+ { 0x0000aa80, 0x00000000, 0x00000000, 0x0000ab90, 0x0000ab90, 0x0000ab90 },
+ { 0x0000aa84, 0x00000000, 0x00000000, 0x0000ab94, 0x0000ab94, 0x0000ab94 },
+ { 0x0000aa88, 0x00000000, 0x00000000, 0x0000ab98, 0x0000ab98, 0x0000ab98 },
+ { 0x0000aa8c, 0x00000000, 0x00000000, 0x0000aba4, 0x0000aba4, 0x0000aba4 },
+ { 0x0000aa90, 0x00000000, 0x00000000, 0x0000aba8, 0x0000aba8, 0x0000aba8 },
+ { 0x0000aa94, 0x00000000, 0x00000000, 0x0000cb04, 0x0000cb04, 0x0000cb04 },
+ { 0x0000aa98, 0x00000000, 0x00000000, 0x0000cb08, 0x0000cb08, 0x0000cb08 },
+ { 0x0000aa9c, 0x00000000, 0x00000000, 0x0000cb0c, 0x0000cb0c, 0x0000cb0c },
+ { 0x0000aaa0, 0x00000000, 0x00000000, 0x0000cb10, 0x0000cb10, 0x0000cb10 },
+ { 0x0000aaa4, 0x00000000, 0x00000000, 0x0000cb14, 0x0000cb14, 0x0000cb14 },
+ { 0x0000aaa8, 0x00000000, 0x00000000, 0x0000cb18, 0x0000cb18, 0x0000cb18 },
+ { 0x0000aaac, 0x00000000, 0x00000000, 0x0000cb8c, 0x0000cb8c, 0x0000cb8c },
+ { 0x0000aab0, 0x00000000, 0x00000000, 0x0000cb90, 0x0000cb90, 0x0000cb90 },
+ { 0x0000aab4, 0x00000000, 0x00000000, 0x0000cf18, 0x0000cf18, 0x0000cf18 },
+ { 0x0000aab8, 0x00000000, 0x00000000, 0x0000cf24, 0x0000cf24, 0x0000cf24 },
+ { 0x0000aabc, 0x00000000, 0x00000000, 0x0000cf28, 0x0000cf28, 0x0000cf28 },
+ { 0x0000aac0, 0x00000000, 0x00000000, 0x0000d314, 0x0000d314, 0x0000d314 },
+ { 0x0000aac4, 0x00000000, 0x00000000, 0x0000d318, 0x0000d318, 0x0000d318 },
+ { 0x0000aac8, 0x00000000, 0x00000000, 0x0000d38c, 0x0000d38c, 0x0000d38c },
+ { 0x0000aacc, 0x00000000, 0x00000000, 0x0000d390, 0x0000d390, 0x0000d390 },
+ { 0x0000aad0, 0x00000000, 0x00000000, 0x0000d394, 0x0000d394, 0x0000d394 },
+ { 0x0000aad4, 0x00000000, 0x00000000, 0x0000d398, 0x0000d398, 0x0000d398 },
+ { 0x0000aad8, 0x00000000, 0x00000000, 0x0000d3a4, 0x0000d3a4, 0x0000d3a4 },
+ { 0x0000aadc, 0x00000000, 0x00000000, 0x0000d3a8, 0x0000d3a8, 0x0000d3a8 },
+ { 0x0000aae0, 0x00000000, 0x00000000, 0x0000d3ac, 0x0000d3ac, 0x0000d3ac },
+ { 0x0000aae4, 0x00000000, 0x00000000, 0x0000d3b0, 0x0000d3b0, 0x0000d3b0 },
+ { 0x0000aae8, 0x00000000, 0x00000000, 0x0000f380, 0x0000f380, 0x0000f380 },
+ { 0x0000aaec, 0x00000000, 0x00000000, 0x0000f384, 0x0000f384, 0x0000f384 },
+ { 0x0000aaf0, 0x00000000, 0x00000000, 0x0000f388, 0x0000f388, 0x0000f388 },
+ { 0x0000aaf4, 0x00000000, 0x00000000, 0x0000f710, 0x0000f710, 0x0000f710 },
+ { 0x0000aaf8, 0x00000000, 0x00000000, 0x0000f714, 0x0000f714, 0x0000f714 },
+ { 0x0000aafc, 0x00000000, 0x00000000, 0x0000f718, 0x0000f718, 0x0000f718 },
+ { 0x0000ab00, 0x00000000, 0x00000000, 0x0000fb10, 0x0000fb10, 0x0000fb10 },
+ { 0x0000ab04, 0x00000000, 0x00000000, 0x0000fb14, 0x0000fb14, 0x0000fb14 },
+ { 0x0000ab08, 0x00000000, 0x00000000, 0x0000fb18, 0x0000fb18, 0x0000fb18 },
+ { 0x0000ab0c, 0x00000000, 0x00000000, 0x0000fb8c, 0x0000fb8c, 0x0000fb8c },
+ { 0x0000ab10, 0x00000000, 0x00000000, 0x0000fb90, 0x0000fb90, 0x0000fb90 },
+ { 0x0000ab14, 0x00000000, 0x00000000, 0x0000fb94, 0x0000fb94, 0x0000fb94 },
+ { 0x0000ab18, 0x00000000, 0x00000000, 0x0000ff8c, 0x0000ff8c, 0x0000ff8c },
+ { 0x0000ab1c, 0x00000000, 0x00000000, 0x0000ff90, 0x0000ff90, 0x0000ff90 },
+ { 0x0000ab20, 0x00000000, 0x00000000, 0x0000ff94, 0x0000ff94, 0x0000ff94 },
+ { 0x0000ab24, 0x00000000, 0x00000000, 0x0000ffa0, 0x0000ffa0, 0x0000ffa0 },
+ { 0x0000ab28, 0x00000000, 0x00000000, 0x0000ffa4, 0x0000ffa4, 0x0000ffa4 },
+ { 0x0000ab2c, 0x00000000, 0x00000000, 0x0000ffa8, 0x0000ffa8, 0x0000ffa8 },
+ { 0x0000ab30, 0x00000000, 0x00000000, 0x0000ffac, 0x0000ffac, 0x0000ffac },
+ { 0x0000ab34, 0x00000000, 0x00000000, 0x0000ffb0, 0x0000ffb0, 0x0000ffb0 },
+ { 0x0000ab38, 0x00000000, 0x00000000, 0x0000ffb4, 0x0000ffb4, 0x0000ffb4 },
+ { 0x0000ab3c, 0x00000000, 0x00000000, 0x0000ffa1, 0x0000ffa1, 0x0000ffa1 },
+ { 0x0000ab40, 0x00000000, 0x00000000, 0x0000ffa5, 0x0000ffa5, 0x0000ffa5 },
+ { 0x0000ab44, 0x00000000, 0x00000000, 0x0000ffa9, 0x0000ffa9, 0x0000ffa9 },
+ { 0x0000ab48, 0x00000000, 0x00000000, 0x0000ffad, 0x0000ffad, 0x0000ffad },
+ { 0x0000ab4c, 0x00000000, 0x00000000, 0x0000ffb1, 0x0000ffb1, 0x0000ffb1 },
+ { 0x0000ab50, 0x00000000, 0x00000000, 0x0000ffb5, 0x0000ffb5, 0x0000ffb5 },
+ { 0x0000ab54, 0x00000000, 0x00000000, 0x0000ffb9, 0x0000ffb9, 0x0000ffb9 },
+ { 0x0000ab58, 0x00000000, 0x00000000, 0x0000ffc5, 0x0000ffc5, 0x0000ffc5 },
+ { 0x0000ab5c, 0x00000000, 0x00000000, 0x0000ffc9, 0x0000ffc9, 0x0000ffc9 },
+ { 0x0000ab60, 0x00000000, 0x00000000, 0x0000ffcd, 0x0000ffcd, 0x0000ffcd },
+ { 0x0000ab64, 0x00000000, 0x00000000, 0x0000ffd1, 0x0000ffd1, 0x0000ffd1 },
+ { 0x0000ab68, 0x00000000, 0x00000000, 0x0000ffd5, 0x0000ffd5, 0x0000ffd5 },
+ { 0x0000ab6c, 0x00000000, 0x00000000, 0x0000ffc2, 0x0000ffc2, 0x0000ffc2 },
+ { 0x0000ab70, 0x00000000, 0x00000000, 0x0000ffc6, 0x0000ffc6, 0x0000ffc6 },
+ { 0x0000ab74, 0x00000000, 0x00000000, 0x0000ffca, 0x0000ffca, 0x0000ffca },
+ { 0x0000ab78, 0x00000000, 0x00000000, 0x0000ffce, 0x0000ffce, 0x0000ffce },
+ { 0x0000ab7c, 0x00000000, 0x00000000, 0x0000ffd2, 0x0000ffd2, 0x0000ffd2 },
+ { 0x0000ab80, 0x00000000, 0x00000000, 0x0000ffd6, 0x0000ffd6, 0x0000ffd6 },
+ { 0x0000ab84, 0x00000000, 0x00000000, 0x0000ffda, 0x0000ffda, 0x0000ffda },
+ { 0x0000ab88, 0x00000000, 0x00000000, 0x0000ffc7, 0x0000ffc7, 0x0000ffc7 },
+ { 0x0000ab8c, 0x00000000, 0x00000000, 0x0000ffcb, 0x0000ffcb, 0x0000ffcb },
+ { 0x0000ab90, 0x00000000, 0x00000000, 0x0000ffcf, 0x0000ffcf, 0x0000ffcf },
+ { 0x0000ab94, 0x00000000, 0x00000000, 0x0000ffd3, 0x0000ffd3, 0x0000ffd3 },
+ { 0x0000ab98, 0x00000000, 0x00000000, 0x0000ffd7, 0x0000ffd7, 0x0000ffd7 },
+ { 0x0000ab9c, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aba0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aba4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aba8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abac, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abb0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abb4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abb8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abbc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abc0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abc4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abc8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abcc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abd0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abd4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abd8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abdc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abe0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abe4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abe8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abec, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abf0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abf4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abf8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abfc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009848, 0x00000000, 0x00000000, 0x00001067, 0x00001067, 0x00001067 },
+ { 0x0000a848, 0x00000000, 0x00000000, 0x00001067, 0x00001067, 0x00001067 },
+};
+
+static const u_int32_t ar9287PciePhy_clkreq_always_on_L1_9287_1_0[][2] = {
+ {0x00004040, 0x9248fd00 },
+ {0x00004040, 0x24924924 },
+ {0x00004040, 0xa8000019 },
+ {0x00004040, 0x13160820 },
+ {0x00004040, 0xe5980560 },
+ {0x00004040, 0xc01dcffd },
+ {0x00004040, 0x1aaabe41 },
+ {0x00004040, 0xbe105554 },
+ {0x00004040, 0x00043007 },
+ {0x00004044, 0x00000000 },
+};
+
+static const u_int32_t ar9287PciePhy_clkreq_off_L1_9287_1_0[][2] = {
+ {0x00004040, 0x9248fd00 },
+ {0x00004040, 0x24924924 },
+ {0x00004040, 0xa8000019 },
+ {0x00004040, 0x13160820 },
+ {0x00004040, 0xe5980560 },
+ {0x00004040, 0xc01dcffc },
+ {0x00004040, 0x1aaabe41 },
+ {0x00004040, 0xbe105554 },
+ {0x00004040, 0x00043007 },
+ {0x00004044, 0x00000000 },
+};
+
+/* AR9287 Revision 11 */
+
+static const u_int32_t ar9287Modes_9287_1_1[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x00001030, 0x00000000, 0x00000000, 0x000002c0, 0x00000160, 0x000001e0 },
+ { 0x00001070, 0x00000000, 0x00000000, 0x00000318, 0x0000018c, 0x000001e0 },
+ { 0x000010b0, 0x00000000, 0x00000000, 0x00007c70, 0x00003e38, 0x00001180 },
+ { 0x000010f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000008 },
+ { 0x00008014, 0x00000000, 0x00000000, 0x10801600, 0x08400b00, 0x06e006e0 },
+ { 0x0000801c, 0x00000000, 0x00000000, 0x12e00057, 0x12e0002b, 0x0988004f },
+ { 0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810, 0x08f04810 },
+ { 0x000081d0, 0x00003200, 0x00003200, 0x0000320a, 0x0000320a, 0x0000320a },
+ { 0x00008318, 0x00000000, 0x00000000, 0x00006880, 0x00003440, 0x00006880 },
+ { 0x00009804, 0x00000000, 0x00000000, 0x000003c4, 0x00000300, 0x00000303 },
+ { 0x00009820, 0x00000000, 0x00000000, 0x02020200, 0x02020200, 0x02020200 },
+ { 0x00009824, 0x00000000, 0x00000000, 0x01000e0e, 0x01000e0e, 0x01000e0e },
+ { 0x00009828, 0x00000000, 0x00000000, 0x3a020001, 0x3a020001, 0x3a020001 },
+ { 0x00009834, 0x00000000, 0x00000000, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+ { 0x00009838, 0x00000003, 0x00000003, 0x00000007, 0x00000007, 0x00000007 },
+ { 0x00009840, 0x206a002e, 0x206a002e, 0x206a012e, 0x206a012e, 0x206a012e },
+ { 0x00009844, 0x03720000, 0x03720000, 0x037216a0, 0x037216a0, 0x037216a0 },
+ { 0x00009850, 0x60000000, 0x60000000, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 },
+ { 0x00009858, 0x7c000d00, 0x7c000d00, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e },
+ { 0x0000985c, 0x3100005e, 0x3100005e, 0x3139605e, 0x31395d5e, 0x31395d5e },
+ { 0x00009860, 0x00058d00, 0x00058d00, 0x00058d20, 0x00058d20, 0x00058d18 },
+ { 0x00009864, 0x00000e00, 0x00000e00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+ { 0x00009868, 0x000040c0, 0x000040c0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
+ { 0x0000986c, 0x00000080, 0x00000080, 0x06903881, 0x06903881, 0x06903881 },
+ { 0x00009914, 0x00000000, 0x00000000, 0x00001130, 0x00000898, 0x000007d0 },
+ { 0x00009918, 0x00000000, 0x00000000, 0x00000016, 0x0000000b, 0x00000016 },
+ { 0x00009924, 0xd00a8a01, 0xd00a8a01, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
+ { 0x00009944, 0xefbc0000, 0xefbc0000, 0xefbc1010, 0xefbc1010, 0xefbc1010 },
+ { 0x00009960, 0x00000000, 0x00000000, 0x00000010, 0x00000010, 0x00000010 },
+ { 0x0000a960, 0x00000000, 0x00000000, 0x00000010, 0x00000010, 0x00000010 },
+ { 0x00009964, 0x00000000, 0x00000000, 0x00000210, 0x00000210, 0x00000210 },
+ { 0x0000c968, 0x00000200, 0x00000200, 0x000003ce, 0x000003ce, 0x000003ce },
+ { 0x000099b8, 0x00000000, 0x00000000, 0x0000001c, 0x0000001c, 0x0000001c },
+ { 0x000099bc, 0x00000000, 0x00000000, 0x00000c00, 0x00000c00, 0x00000c00 },
+ { 0x000099c0, 0x00000000, 0x00000000, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
+ { 0x0000a204, 0x00000440, 0x00000440, 0x00000444, 0x00000444, 0x00000444 },
+ { 0x0000a20c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000b20c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a21c, 0x1803800a, 0x1803800a, 0x1883800a, 0x1883800a, 0x1883800a },
+ { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+ { 0x0000a250, 0x00000000, 0x00000000, 0x0004a000, 0x0004a000, 0x0004a000 },
+ { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+ { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+};
+
+static const u_int32_t ar9287Common_9287_1_1[][2] = {
+ { 0x0000000c, 0x00000000 },
+ { 0x00000030, 0x00020015 },
+ { 0x00000034, 0x00000005 },
+ { 0x00000040, 0x00000000 },
+ { 0x00000044, 0x00000008 },
+ { 0x00000048, 0x00000008 },
+ { 0x0000004c, 0x00000010 },
+ { 0x00000050, 0x00000000 },
+ { 0x00000054, 0x0000001f },
+ { 0x00000800, 0x00000000 },
+ { 0x00000804, 0x00000000 },
+ { 0x00000808, 0x00000000 },
+ { 0x0000080c, 0x00000000 },
+ { 0x00000810, 0x00000000 },
+ { 0x00000814, 0x00000000 },
+ { 0x00000818, 0x00000000 },
+ { 0x0000081c, 0x00000000 },
+ { 0x00000820, 0x00000000 },
+ { 0x00000824, 0x00000000 },
+ { 0x00001040, 0x002ffc0f },
+ { 0x00001044, 0x002ffc0f },
+ { 0x00001048, 0x002ffc0f },
+ { 0x0000104c, 0x002ffc0f },
+ { 0x00001050, 0x002ffc0f },
+ { 0x00001054, 0x002ffc0f },
+ { 0x00001058, 0x002ffc0f },
+ { 0x0000105c, 0x002ffc0f },
+ { 0x00001060, 0x002ffc0f },
+ { 0x00001064, 0x002ffc0f },
+ { 0x00001230, 0x00000000 },
+ { 0x00001270, 0x00000000 },
+ { 0x00001038, 0x00000000 },
+ { 0x00001078, 0x00000000 },
+ { 0x000010b8, 0x00000000 },
+ { 0x000010f8, 0x00000000 },
+ { 0x00001138, 0x00000000 },
+ { 0x00001178, 0x00000000 },
+ { 0x000011b8, 0x00000000 },
+ { 0x000011f8, 0x00000000 },
+ { 0x00001238, 0x00000000 },
+ { 0x00001278, 0x00000000 },
+ { 0x000012b8, 0x00000000 },
+ { 0x000012f8, 0x00000000 },
+ { 0x00001338, 0x00000000 },
+ { 0x00001378, 0x00000000 },
+ { 0x000013b8, 0x00000000 },
+ { 0x000013f8, 0x00000000 },
+ { 0x00001438, 0x00000000 },
+ { 0x00001478, 0x00000000 },
+ { 0x000014b8, 0x00000000 },
+ { 0x000014f8, 0x00000000 },
+ { 0x00001538, 0x00000000 },
+ { 0x00001578, 0x00000000 },
+ { 0x000015b8, 0x00000000 },
+ { 0x000015f8, 0x00000000 },
+ { 0x00001638, 0x00000000 },
+ { 0x00001678, 0x00000000 },
+ { 0x000016b8, 0x00000000 },
+ { 0x000016f8, 0x00000000 },
+ { 0x00001738, 0x00000000 },
+ { 0x00001778, 0x00000000 },
+ { 0x000017b8, 0x00000000 },
+ { 0x000017f8, 0x00000000 },
+ { 0x0000103c, 0x00000000 },
+ { 0x0000107c, 0x00000000 },
+ { 0x000010bc, 0x00000000 },
+ { 0x000010fc, 0x00000000 },
+ { 0x0000113c, 0x00000000 },
+ { 0x0000117c, 0x00000000 },
+ { 0x000011bc, 0x00000000 },
+ { 0x000011fc, 0x00000000 },
+ { 0x0000123c, 0x00000000 },
+ { 0x0000127c, 0x00000000 },
+ { 0x000012bc, 0x00000000 },
+ { 0x000012fc, 0x00000000 },
+ { 0x0000133c, 0x00000000 },
+ { 0x0000137c, 0x00000000 },
+ { 0x000013bc, 0x00000000 },
+ { 0x000013fc, 0x00000000 },
+ { 0x0000143c, 0x00000000 },
+ { 0x0000147c, 0x00000000 },
+ { 0x00004030, 0x00000002 },
+ { 0x0000403c, 0x00000002 },
+ { 0x00004024, 0x0000001f },
+ { 0x00004060, 0x00000000 },
+ { 0x00004064, 0x00000000 },
+ { 0x00007010, 0x00000033 },
+ { 0x00007020, 0x00000000 },
+ { 0x00007034, 0x00000002 },
+ { 0x00007038, 0x000004c2 },
+ { 0x00008004, 0x00000000 },
+ { 0x00008008, 0x00000000 },
+ { 0x0000800c, 0x00000000 },
+ { 0x00008018, 0x00000700 },
+ { 0x00008020, 0x00000000 },
+ { 0x00008038, 0x00000000 },
+ { 0x0000803c, 0x00000000 },
+ { 0x00008048, 0x40000000 },
+ { 0x00008054, 0x00000000 },
+ { 0x00008058, 0x00000000 },
+ { 0x0000805c, 0x000fc78f },
+ { 0x00008060, 0x0000000f },
+ { 0x00008064, 0x00000000 },
+ { 0x00008070, 0x00000000 },
+ { 0x000080c0, 0x2a80001a },
+ { 0x000080c4, 0x05dc01e0 },
+ { 0x000080c8, 0x1f402710 },
+ { 0x000080cc, 0x01f40000 },
+ { 0x000080d0, 0x00001e00 },
+ { 0x000080d4, 0x00000000 },
+ { 0x000080d8, 0x00400000 },
+ { 0x000080e0, 0xffffffff },
+ { 0x000080e4, 0x0000ffff },
+ { 0x000080e8, 0x003f3f3f },
+ { 0x000080ec, 0x00000000 },
+ { 0x000080f0, 0x00000000 },
+ { 0x000080f4, 0x00000000 },
+ { 0x000080f8, 0x00000000 },
+ { 0x000080fc, 0x00020000 },
+ { 0x00008100, 0x00020000 },
+ { 0x00008104, 0x00000001 },
+ { 0x00008108, 0x00000052 },
+ { 0x0000810c, 0x00000000 },
+ { 0x00008110, 0x00000168 },
+ { 0x00008118, 0x000100aa },
+ { 0x0000811c, 0x00003210 },
+ { 0x00008124, 0x00000000 },
+ { 0x00008128, 0x00000000 },
+ { 0x0000812c, 0x00000000 },
+ { 0x00008130, 0x00000000 },
+ { 0x00008134, 0x00000000 },
+ { 0x00008138, 0x00000000 },
+ { 0x0000813c, 0x00000000 },
+ { 0x00008144, 0xffffffff },
+ { 0x00008168, 0x00000000 },
+ { 0x0000816c, 0x00000000 },
+ { 0x00008170, 0x18487320 },
+ { 0x00008174, 0xfaa4fa50 },
+ { 0x00008178, 0x00000100 },
+ { 0x0000817c, 0x00000000 },
+ { 0x000081c0, 0x00000000 },
+ { 0x000081c4, 0x00000000 },
+ { 0x000081d4, 0x00000000 },
+ { 0x000081ec, 0x00000000 },
+ { 0x000081f0, 0x00000000 },
+ { 0x000081f4, 0x00000000 },
+ { 0x000081f8, 0x00000000 },
+ { 0x000081fc, 0x00000000 },
+ { 0x00008200, 0x00000000 },
+ { 0x00008204, 0x00000000 },
+ { 0x00008208, 0x00000000 },
+ { 0x0000820c, 0x00000000 },
+ { 0x00008210, 0x00000000 },
+ { 0x00008214, 0x00000000 },
+ { 0x00008218, 0x00000000 },
+ { 0x0000821c, 0x00000000 },
+ { 0x00008220, 0x00000000 },
+ { 0x00008224, 0x00000000 },
+ { 0x00008228, 0x00000000 },
+ { 0x0000822c, 0x00000000 },
+ { 0x00008230, 0x00000000 },
+ { 0x00008234, 0x00000000 },
+ { 0x00008238, 0x00000000 },
+ { 0x0000823c, 0x00000000 },
+ { 0x00008240, 0x00100000 },
+ { 0x00008244, 0x0010f400 },
+ { 0x00008248, 0x00000100 },
+ { 0x0000824c, 0x0001e800 },
+ { 0x00008250, 0x00000000 },
+ { 0x00008254, 0x00000000 },
+ { 0x00008258, 0x00000000 },
+ { 0x0000825c, 0x400000ff },
+ { 0x00008260, 0x00080922 },
+ { 0x00008264, 0x88a00010 },
+ { 0x00008270, 0x00000000 },
+ { 0x00008274, 0x40000000 },
+ { 0x00008278, 0x003e4180 },
+ { 0x0000827c, 0x00000000 },
+ { 0x00008284, 0x0000002c },
+ { 0x00008288, 0x0000002c },
+ { 0x0000828c, 0x000000ff },
+ { 0x00008294, 0x00000000 },
+ { 0x00008298, 0x00000000 },
+ { 0x0000829c, 0x00000000 },
+ { 0x00008300, 0x00000040 },
+ { 0x00008314, 0x00000000 },
+ { 0x00008328, 0x00000000 },
+ { 0x0000832c, 0x00000007 },
+ { 0x00008330, 0x00000302 },
+ { 0x00008334, 0x00000e00 },
+ { 0x00008338, 0x00ff0000 },
+ { 0x0000833c, 0x00000000 },
+ { 0x00008340, 0x000107ff },
+ { 0x00008344, 0x01c81043 },
+ { 0x00008360, 0xffffffff },
+ { 0x00008364, 0xffffffff },
+ { 0x00008368, 0x00000000 },
+ { 0x00008370, 0x00000000 },
+ { 0x00008374, 0x000000ff },
+ { 0x00008378, 0x00000000 },
+ { 0x0000837c, 0x00000000 },
+ { 0x00008380, 0xffffffff },
+ { 0x00008384, 0xffffffff },
+ { 0x00008390, 0x0fffffff },
+ { 0x00008394, 0x0fffffff },
+ { 0x00008398, 0x00000000 },
+ { 0x0000839c, 0x00000000 },
+ { 0x000083a0, 0x00000000 },
+ { 0x00009808, 0x00000000 },
+ { 0x0000980c, 0xafe68e30 },
+ { 0x00009810, 0xfd14e000 },
+ { 0x00009814, 0x9c0a9f6b },
+ { 0x0000981c, 0x00000000 },
+ { 0x0000982c, 0x0000a000 },
+ { 0x00009830, 0x00000000 },
+ { 0x0000983c, 0x00200400 },
+ { 0x0000984c, 0x0040233c },
+ { 0x0000a84c, 0x0040233c },
+ { 0x00009854, 0x00000044 },
+ { 0x00009900, 0x00000000 },
+ { 0x00009904, 0x00000000 },
+ { 0x00009908, 0x00000000 },
+ { 0x0000990c, 0x00000000 },
+ { 0x00009910, 0x10002310 },
+ { 0x0000991c, 0x10000fff },
+ { 0x00009920, 0x04900000 },
+ { 0x0000a920, 0x04900000 },
+ { 0x00009928, 0x00000001 },
+ { 0x0000992c, 0x00000004 },
+ { 0x00009930, 0x00000000 },
+ { 0x0000a930, 0x00000000 },
+ { 0x00009934, 0x1e1f2022 },
+ { 0x00009938, 0x0a0b0c0d },
+ { 0x0000993c, 0x00000000 },
+ { 0x00009948, 0x9280c00a },
+ { 0x0000994c, 0x00020028 },
+ { 0x00009954, 0x5f3ca3de },
+ { 0x00009958, 0x0108ecff },
+ { 0x00009940, 0x14750604 },
+ { 0x0000c95c, 0x004b6a8e },
+ { 0x00009970, 0x990bb514 },
+ { 0x00009974, 0x00000000 },
+ { 0x00009978, 0x00000001 },
+ { 0x0000997c, 0x00000000 },
+ { 0x000099a0, 0x00000000 },
+ { 0x000099a4, 0x00000001 },
+ { 0x000099a8, 0x201fff00 },
+ { 0x000099ac, 0x0c6f0000 },
+ { 0x000099b0, 0x03051000 },
+ { 0x000099b4, 0x00000820 },
+ { 0x000099c4, 0x06336f77 },
+ { 0x000099c8, 0x6af6532f },
+ { 0x000099cc, 0x08f186c8 },
+ { 0x000099d0, 0x00046384 },
+ { 0x000099dc, 0x00000000 },
+ { 0x000099e0, 0x00000000 },
+ { 0x000099e4, 0xaaaaaaaa },
+ { 0x000099e8, 0x3c466478 },
+ { 0x000099ec, 0x0cc80caa },
+ { 0x000099f0, 0x00000000 },
+ { 0x000099fc, 0x00001042 },
+ { 0x0000a1f4, 0x00fffeff },
+ { 0x0000a1f8, 0x00f5f9ff },
+ { 0x0000a1fc, 0xb79f6427 },
+ { 0x0000a208, 0x803e4788 },
+ { 0x0000a210, 0x4080a333 },
+ { 0x0000a214, 0x40206c10 },
+ { 0x0000a218, 0x009c4060 },
+ { 0x0000a220, 0x01834061 },
+ { 0x0000a224, 0x00000400 },
+ { 0x0000a228, 0x000003b5 },
+ { 0x0000a22c, 0x233f7180 },
+ { 0x0000a234, 0x20202020 },
+ { 0x0000a238, 0x20202020 },
+ { 0x0000a23c, 0x13c889af },
+ { 0x0000a240, 0x38490a20 },
+ { 0x0000a244, 0x00000000 },
+ { 0x0000a248, 0xfffffffc },
+ { 0x0000a24c, 0x00000000 },
+ { 0x0000a254, 0x00000000 },
+ { 0x0000a258, 0x0cdbd380 },
+ { 0x0000a25c, 0x0f0f0f01 },
+ { 0x0000a260, 0xdfa91f01 },
+ { 0x0000a264, 0x00418a11 },
+ { 0x0000b264, 0x00418a11 },
+ { 0x0000a268, 0x00000000 },
+ { 0x0000a26c, 0x0e79e5c6 },
+ { 0x0000b26c, 0x0e79e5c6 },
+ { 0x0000d270, 0x00820820 },
+ { 0x0000a278, 0x1ce739ce },
+ { 0x0000a27c, 0x050701ce },
+ { 0x0000d35c, 0x07ffffef },
+ { 0x0000d360, 0x0fffffe7 },
+ { 0x0000d364, 0x17ffffe5 },
+ { 0x0000d368, 0x1fffffe4 },
+ { 0x0000d36c, 0x37ffffe3 },
+ { 0x0000d370, 0x3fffffe3 },
+ { 0x0000d374, 0x57ffffe3 },
+ { 0x0000d378, 0x5fffffe2 },
+ { 0x0000d37c, 0x7fffffe2 },
+ { 0x0000d380, 0x7f3c7bba },
+ { 0x0000d384, 0xf3307ff0 },
+ { 0x0000a388, 0x0c000000 },
+ { 0x0000a38c, 0x20202020 },
+ { 0x0000a390, 0x20202020 },
+ { 0x0000a394, 0x1ce739ce },
+ { 0x0000a398, 0x000001ce },
+ { 0x0000b398, 0x000001ce },
+ { 0x0000a39c, 0x00000001 },
+ { 0x0000a3c8, 0x00000246 },
+ { 0x0000a3cc, 0x20202020 },
+ { 0x0000a3d0, 0x20202020 },
+ { 0x0000a3d4, 0x20202020 },
+ { 0x0000a3dc, 0x1ce739ce },
+ { 0x0000a3e0, 0x000001ce },
+ { 0x0000a3e4, 0x00000000 },
+ { 0x0000a3e8, 0x18c43433 },
+ { 0x0000a3ec, 0x00f70081 },
+ { 0x0000a3f0, 0x01036a1e },
+ { 0x0000a3f4, 0x00000000 },
+ { 0x0000b3f4, 0x00000000 },
+ { 0x0000a7d8, 0x000003f1 },
+ { 0x00007800, 0x00000800 },
+ { 0x00007804, 0x6c35ffc2 },
+ { 0x00007808, 0x6db6c000 },
+ { 0x0000780c, 0x6db6cb30 },
+ { 0x00007810, 0x6db6cb6c },
+ { 0x00007814, 0x0501e200 },
+ { 0x00007818, 0x0094128d },
+ { 0x0000781c, 0x976ee392 },
+ { 0x00007820, 0xf75ff6fc },
+ { 0x00007824, 0x00040000 },
+ { 0x00007828, 0xdb003012 },
+ { 0x0000782c, 0x04924914 },
+ { 0x00007830, 0x21084210 },
+ { 0x00007834, 0x00140000 },
+ { 0x00007838, 0x0e4548d8 },
+ { 0x0000783c, 0x54214514 },
+ { 0x00007840, 0x02025830 },
+ { 0x00007844, 0x71c0d388 },
+ { 0x00007848, 0x934934a8 },
+ { 0x00007850, 0x00000000 },
+ { 0x00007854, 0x00000800 },
+ { 0x00007858, 0x6c35ffc2 },
+ { 0x0000785c, 0x6db6c000 },
+ { 0x00007860, 0x6db6cb30 },
+ { 0x00007864, 0x6db6cb6c },
+ { 0x00007868, 0x0501e200 },
+ { 0x0000786c, 0x0094128d },
+ { 0x00007870, 0x976ee392 },
+ { 0x00007874, 0xf75ff6fc },
+ { 0x00007878, 0x00040000 },
+ { 0x0000787c, 0xdb003012 },
+ { 0x00007880, 0x04924914 },
+ { 0x00007884, 0x21084210 },
+ { 0x00007888, 0x001b6db0 },
+ { 0x0000788c, 0x00376b63 },
+ { 0x00007890, 0x06db6db6 },
+ { 0x00007894, 0x006d8000 },
+ { 0x00007898, 0x48100000 },
+ { 0x0000789c, 0x00000000 },
+ { 0x000078a0, 0x08000000 },
+ { 0x000078a4, 0x0007ffd8 },
+ { 0x000078a8, 0x0007ffd8 },
+ { 0x000078ac, 0x001c0020 },
+ { 0x000078b0, 0x00060aeb },
+ { 0x000078b4, 0x40008080 },
+ { 0x000078b8, 0x2a850160 },
+};
+
+static const u_int32_t ar9287Modes_tx_gain_9287_1_1[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a304, 0x00000000, 0x00000000, 0x00004002, 0x00004002, 0x00004002 },
+ { 0x0000a308, 0x00000000, 0x00000000, 0x00008004, 0x00008004, 0x00008004 },
+ { 0x0000a30c, 0x00000000, 0x00000000, 0x0000c00a, 0x0000c00a, 0x0000c00a },
+ { 0x0000a310, 0x00000000, 0x00000000, 0x0001000c, 0x0001000c, 0x0001000c },
+ { 0x0000a314, 0x00000000, 0x00000000, 0x0001420b, 0x0001420b, 0x0001420b },
+ { 0x0000a318, 0x00000000, 0x00000000, 0x0001824a, 0x0001824a, 0x0001824a },
+ { 0x0000a31c, 0x00000000, 0x00000000, 0x0001c44a, 0x0001c44a, 0x0001c44a },
+ { 0x0000a320, 0x00000000, 0x00000000, 0x0002064a, 0x0002064a, 0x0002064a },
+ { 0x0000a324, 0x00000000, 0x00000000, 0x0002484a, 0x0002484a, 0x0002484a },
+ { 0x0000a328, 0x00000000, 0x00000000, 0x00028a4a, 0x00028a4a, 0x00028a4a },
+ { 0x0000a32c, 0x00000000, 0x00000000, 0x0002cc4a, 0x0002cc4a, 0x0002cc4a },
+ { 0x0000a330, 0x00000000, 0x00000000, 0x00030e4a, 0x00030e4a, 0x00030e4a },
+ { 0x0000a334, 0x00000000, 0x00000000, 0x00034e8a, 0x00034e8a, 0x00034e8a },
+ { 0x0000a338, 0x00000000, 0x00000000, 0x00038e8c, 0x00038e8c, 0x00038e8c },
+ { 0x0000a33c, 0x00000000, 0x00000000, 0x0003cecc, 0x0003cecc, 0x0003cecc },
+ { 0x0000a340, 0x00000000, 0x00000000, 0x00040ed4, 0x00040ed4, 0x00040ed4 },
+ { 0x0000a344, 0x00000000, 0x00000000, 0x00044edc, 0x00044edc, 0x00044edc },
+ { 0x0000a348, 0x00000000, 0x00000000, 0x00048ede, 0x00048ede, 0x00048ede },
+ { 0x0000a34c, 0x00000000, 0x00000000, 0x0004cf1e, 0x0004cf1e, 0x0004cf1e },
+ { 0x0000a350, 0x00000000, 0x00000000, 0x00050f5e, 0x00050f5e, 0x00050f5e },
+ { 0x0000a354, 0x00000000, 0x00000000, 0x00054f9e, 0x00054f9e, 0x00054f9e },
+ { 0x0000a780, 0x00000000, 0x00000000, 0x00000062, 0x00000062, 0x00000062 },
+ { 0x0000a784, 0x00000000, 0x00000000, 0x00004064, 0x00004064, 0x00004064 },
+ { 0x0000a788, 0x00000000, 0x00000000, 0x000080a4, 0x000080a4, 0x000080a4 },
+ { 0x0000a78c, 0x00000000, 0x00000000, 0x0000c0aa, 0x0000c0aa, 0x0000c0aa },
+ { 0x0000a790, 0x00000000, 0x00000000, 0x000100ac, 0x000100ac, 0x000100ac },
+ { 0x0000a794, 0x00000000, 0x00000000, 0x000140b4, 0x000140b4, 0x000140b4 },
+ { 0x0000a798, 0x00000000, 0x00000000, 0x000180f4, 0x000180f4, 0x000180f4 },
+ { 0x0000a79c, 0x00000000, 0x00000000, 0x0001c134, 0x0001c134, 0x0001c134 },
+ { 0x0000a7a0, 0x00000000, 0x00000000, 0x00020174, 0x00020174, 0x00020174 },
+ { 0x0000a7a4, 0x00000000, 0x00000000, 0x0002417c, 0x0002417c, 0x0002417c },
+ { 0x0000a7a8, 0x00000000, 0x00000000, 0x0002817e, 0x0002817e, 0x0002817e },
+ { 0x0000a7ac, 0x00000000, 0x00000000, 0x0002c1be, 0x0002c1be, 0x0002c1be },
+ { 0x0000a7b0, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7b4, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7b8, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7bc, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7c0, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7c4, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7c8, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7cc, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7d0, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a7d4, 0x00000000, 0x00000000, 0x000301fe, 0x000301fe, 0x000301fe },
+ { 0x0000a274, 0x0a180000, 0x0a180000, 0x0a1aa000, 0x0a1aa000, 0x0a1aa000 },
+};
+
+static const u_int32_t ar9287Modes_rx_gain_9287_1_1[][6] = {
+ /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
+ { 0x00009a00, 0x00000000, 0x00000000, 0x0000a120, 0x0000a120, 0x0000a120 },
+ { 0x00009a04, 0x00000000, 0x00000000, 0x0000a124, 0x0000a124, 0x0000a124 },
+ { 0x00009a08, 0x00000000, 0x00000000, 0x0000a128, 0x0000a128, 0x0000a128 },
+ { 0x00009a0c, 0x00000000, 0x00000000, 0x0000a12c, 0x0000a12c, 0x0000a12c },
+ { 0x00009a10, 0x00000000, 0x00000000, 0x0000a130, 0x0000a130, 0x0000a130 },
+ { 0x00009a14, 0x00000000, 0x00000000, 0x0000a194, 0x0000a194, 0x0000a194 },
+ { 0x00009a18, 0x00000000, 0x00000000, 0x0000a198, 0x0000a198, 0x0000a198 },
+ { 0x00009a1c, 0x00000000, 0x00000000, 0x0000a20c, 0x0000a20c, 0x0000a20c },
+ { 0x00009a20, 0x00000000, 0x00000000, 0x0000a210, 0x0000a210, 0x0000a210 },
+ { 0x00009a24, 0x00000000, 0x00000000, 0x0000a284, 0x0000a284, 0x0000a284 },
+ { 0x00009a28, 0x00000000, 0x00000000, 0x0000a288, 0x0000a288, 0x0000a288 },
+ { 0x00009a2c, 0x00000000, 0x00000000, 0x0000a28c, 0x0000a28c, 0x0000a28c },
+ { 0x00009a30, 0x00000000, 0x00000000, 0x0000a290, 0x0000a290, 0x0000a290 },
+ { 0x00009a34, 0x00000000, 0x00000000, 0x0000a294, 0x0000a294, 0x0000a294 },
+ { 0x00009a38, 0x00000000, 0x00000000, 0x0000a2a0, 0x0000a2a0, 0x0000a2a0 },
+ { 0x00009a3c, 0x00000000, 0x00000000, 0x0000a2a4, 0x0000a2a4, 0x0000a2a4 },
+ { 0x00009a40, 0x00000000, 0x00000000, 0x0000a2a8, 0x0000a2a8, 0x0000a2a8 },
+ { 0x00009a44, 0x00000000, 0x00000000, 0x0000a2ac, 0x0000a2ac, 0x0000a2ac },
+ { 0x00009a48, 0x00000000, 0x00000000, 0x0000a2b0, 0x0000a2b0, 0x0000a2b0 },
+ { 0x00009a4c, 0x00000000, 0x00000000, 0x0000a2b4, 0x0000a2b4, 0x0000a2b4 },
+ { 0x00009a50, 0x00000000, 0x00000000, 0x0000a2b8, 0x0000a2b8, 0x0000a2b8 },
+ { 0x00009a54, 0x00000000, 0x00000000, 0x0000a2c4, 0x0000a2c4, 0x0000a2c4 },
+ { 0x00009a58, 0x00000000, 0x00000000, 0x0000a708, 0x0000a708, 0x0000a708 },
+ { 0x00009a5c, 0x00000000, 0x00000000, 0x0000a70c, 0x0000a70c, 0x0000a70c },
+ { 0x00009a60, 0x00000000, 0x00000000, 0x0000a710, 0x0000a710, 0x0000a710 },
+ { 0x00009a64, 0x00000000, 0x00000000, 0x0000ab04, 0x0000ab04, 0x0000ab04 },
+ { 0x00009a68, 0x00000000, 0x00000000, 0x0000ab08, 0x0000ab08, 0x0000ab08 },
+ { 0x00009a6c, 0x00000000, 0x00000000, 0x0000ab0c, 0x0000ab0c, 0x0000ab0c },
+ { 0x00009a70, 0x00000000, 0x00000000, 0x0000ab10, 0x0000ab10, 0x0000ab10 },
+ { 0x00009a74, 0x00000000, 0x00000000, 0x0000ab14, 0x0000ab14, 0x0000ab14 },
+ { 0x00009a78, 0x00000000, 0x00000000, 0x0000ab18, 0x0000ab18, 0x0000ab18 },
+ { 0x00009a7c, 0x00000000, 0x00000000, 0x0000ab8c, 0x0000ab8c, 0x0000ab8c },
+ { 0x00009a80, 0x00000000, 0x00000000, 0x0000ab90, 0x0000ab90, 0x0000ab90 },
+ { 0x00009a84, 0x00000000, 0x00000000, 0x0000ab94, 0x0000ab94, 0x0000ab94 },
+ { 0x00009a88, 0x00000000, 0x00000000, 0x0000ab98, 0x0000ab98, 0x0000ab98 },
+ { 0x00009a8c, 0x00000000, 0x00000000, 0x0000aba4, 0x0000aba4, 0x0000aba4 },
+ { 0x00009a90, 0x00000000, 0x00000000, 0x0000aba8, 0x0000aba8, 0x0000aba8 },
+ { 0x00009a94, 0x00000000, 0x00000000, 0x0000cb04, 0x0000cb04, 0x0000cb04 },
+ { 0x00009a98, 0x00000000, 0x00000000, 0x0000cb08, 0x0000cb08, 0x0000cb08 },
+ { 0x00009a9c, 0x00000000, 0x00000000, 0x0000cb0c, 0x0000cb0c, 0x0000cb0c },
+ { 0x00009aa0, 0x00000000, 0x00000000, 0x0000cb10, 0x0000cb10, 0x0000cb10 },
+ { 0x00009aa4, 0x00000000, 0x00000000, 0x0000cb14, 0x0000cb14, 0x0000cb14 },
+ { 0x00009aa8, 0x00000000, 0x00000000, 0x0000cb18, 0x0000cb18, 0x0000cb18 },
+ { 0x00009aac, 0x00000000, 0x00000000, 0x0000cb8c, 0x0000cb8c, 0x0000cb8c },
+ { 0x00009ab0, 0x00000000, 0x00000000, 0x0000cb90, 0x0000cb90, 0x0000cb90 },
+ { 0x00009ab4, 0x00000000, 0x00000000, 0x0000cf18, 0x0000cf18, 0x0000cf18 },
+ { 0x00009ab8, 0x00000000, 0x00000000, 0x0000cf24, 0x0000cf24, 0x0000cf24 },
+ { 0x00009abc, 0x00000000, 0x00000000, 0x0000cf28, 0x0000cf28, 0x0000cf28 },
+ { 0x00009ac0, 0x00000000, 0x00000000, 0x0000d314, 0x0000d314, 0x0000d314 },
+ { 0x00009ac4, 0x00000000, 0x00000000, 0x0000d318, 0x0000d318, 0x0000d318 },
+ { 0x00009ac8, 0x00000000, 0x00000000, 0x0000d38c, 0x0000d38c, 0x0000d38c },
+ { 0x00009acc, 0x00000000, 0x00000000, 0x0000d390, 0x0000d390, 0x0000d390 },
+ { 0x00009ad0, 0x00000000, 0x00000000, 0x0000d394, 0x0000d394, 0x0000d394 },
+ { 0x00009ad4, 0x00000000, 0x00000000, 0x0000d398, 0x0000d398, 0x0000d398 },
+ { 0x00009ad8, 0x00000000, 0x00000000, 0x0000d3a4, 0x0000d3a4, 0x0000d3a4 },
+ { 0x00009adc, 0x00000000, 0x00000000, 0x0000d3a8, 0x0000d3a8, 0x0000d3a8 },
+ { 0x00009ae0, 0x00000000, 0x00000000, 0x0000d3ac, 0x0000d3ac, 0x0000d3ac },
+ { 0x00009ae4, 0x00000000, 0x00000000, 0x0000d3b0, 0x0000d3b0, 0x0000d3b0 },
+ { 0x00009ae8, 0x00000000, 0x00000000, 0x0000f380, 0x0000f380, 0x0000f380 },
+ { 0x00009aec, 0x00000000, 0x00000000, 0x0000f384, 0x0000f384, 0x0000f384 },
+ { 0x00009af0, 0x00000000, 0x00000000, 0x0000f388, 0x0000f388, 0x0000f388 },
+ { 0x00009af4, 0x00000000, 0x00000000, 0x0000f710, 0x0000f710, 0x0000f710 },
+ { 0x00009af8, 0x00000000, 0x00000000, 0x0000f714, 0x0000f714, 0x0000f714 },
+ { 0x00009afc, 0x00000000, 0x00000000, 0x0000f718, 0x0000f718, 0x0000f718 },
+ { 0x00009b00, 0x00000000, 0x00000000, 0x0000fb10, 0x0000fb10, 0x0000fb10 },
+ { 0x00009b04, 0x00000000, 0x00000000, 0x0000fb14, 0x0000fb14, 0x0000fb14 },
+ { 0x00009b08, 0x00000000, 0x00000000, 0x0000fb18, 0x0000fb18, 0x0000fb18 },
+ { 0x00009b0c, 0x00000000, 0x00000000, 0x0000fb8c, 0x0000fb8c, 0x0000fb8c },
+ { 0x00009b10, 0x00000000, 0x00000000, 0x0000fb90, 0x0000fb90, 0x0000fb90 },
+ { 0x00009b14, 0x00000000, 0x00000000, 0x0000fb94, 0x0000fb94, 0x0000fb94 },
+ { 0x00009b18, 0x00000000, 0x00000000, 0x0000ff8c, 0x0000ff8c, 0x0000ff8c },
+ { 0x00009b1c, 0x00000000, 0x00000000, 0x0000ff90, 0x0000ff90, 0x0000ff90 },
+ { 0x00009b20, 0x00000000, 0x00000000, 0x0000ff94, 0x0000ff94, 0x0000ff94 },
+ { 0x00009b24, 0x00000000, 0x00000000, 0x0000ffa0, 0x0000ffa0, 0x0000ffa0 },
+ { 0x00009b28, 0x00000000, 0x00000000, 0x0000ffa4, 0x0000ffa4, 0x0000ffa4 },
+ { 0x00009b2c, 0x00000000, 0x00000000, 0x0000ffa8, 0x0000ffa8, 0x0000ffa8 },
+ { 0x00009b30, 0x00000000, 0x00000000, 0x0000ffac, 0x0000ffac, 0x0000ffac },
+ { 0x00009b34, 0x00000000, 0x00000000, 0x0000ffb0, 0x0000ffb0, 0x0000ffb0 },
+ { 0x00009b38, 0x00000000, 0x00000000, 0x0000ffb4, 0x0000ffb4, 0x0000ffb4 },
+ { 0x00009b3c, 0x00000000, 0x00000000, 0x0000ffa1, 0x0000ffa1, 0x0000ffa1 },
+ { 0x00009b40, 0x00000000, 0x00000000, 0x0000ffa5, 0x0000ffa5, 0x0000ffa5 },
+ { 0x00009b44, 0x00000000, 0x00000000, 0x0000ffa9, 0x0000ffa9, 0x0000ffa9 },
+ { 0x00009b48, 0x00000000, 0x00000000, 0x0000ffad, 0x0000ffad, 0x0000ffad },
+ { 0x00009b4c, 0x00000000, 0x00000000, 0x0000ffb1, 0x0000ffb1, 0x0000ffb1 },
+ { 0x00009b50, 0x00000000, 0x00000000, 0x0000ffb5, 0x0000ffb5, 0x0000ffb5 },
+ { 0x00009b54, 0x00000000, 0x00000000, 0x0000ffb9, 0x0000ffb9, 0x0000ffb9 },
+ { 0x00009b58, 0x00000000, 0x00000000, 0x0000ffc5, 0x0000ffc5, 0x0000ffc5 },
+ { 0x00009b5c, 0x00000000, 0x00000000, 0x0000ffc9, 0x0000ffc9, 0x0000ffc9 },
+ { 0x00009b60, 0x00000000, 0x00000000, 0x0000ffcd, 0x0000ffcd, 0x0000ffcd },
+ { 0x00009b64, 0x00000000, 0x00000000, 0x0000ffd1, 0x0000ffd1, 0x0000ffd1 },
+ { 0x00009b68, 0x00000000, 0x00000000, 0x0000ffd5, 0x0000ffd5, 0x0000ffd5 },
+ { 0x00009b6c, 0x00000000, 0x00000000, 0x0000ffc2, 0x0000ffc2, 0x0000ffc2 },
+ { 0x00009b70, 0x00000000, 0x00000000, 0x0000ffc6, 0x0000ffc6, 0x0000ffc6 },
+ { 0x00009b74, 0x00000000, 0x00000000, 0x0000ffca, 0x0000ffca, 0x0000ffca },
+ { 0x00009b78, 0x00000000, 0x00000000, 0x0000ffce, 0x0000ffce, 0x0000ffce },
+ { 0x00009b7c, 0x00000000, 0x00000000, 0x0000ffd2, 0x0000ffd2, 0x0000ffd2 },
+ { 0x00009b80, 0x00000000, 0x00000000, 0x0000ffd6, 0x0000ffd6, 0x0000ffd6 },
+ { 0x00009b84, 0x00000000, 0x00000000, 0x0000ffda, 0x0000ffda, 0x0000ffda },
+ { 0x00009b88, 0x00000000, 0x00000000, 0x0000ffc7, 0x0000ffc7, 0x0000ffc7 },
+ { 0x00009b8c, 0x00000000, 0x00000000, 0x0000ffcb, 0x0000ffcb, 0x0000ffcb },
+ { 0x00009b90, 0x00000000, 0x00000000, 0x0000ffcf, 0x0000ffcf, 0x0000ffcf },
+ { 0x00009b94, 0x00000000, 0x00000000, 0x0000ffd3, 0x0000ffd3, 0x0000ffd3 },
+ { 0x00009b98, 0x00000000, 0x00000000, 0x0000ffd7, 0x0000ffd7, 0x0000ffd7 },
+ { 0x00009b9c, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009ba0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009ba4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009ba8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bac, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bb0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bb4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bb8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bbc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bc0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bc4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bc8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bcc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bd0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bd4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bd8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bdc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009be0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009be4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009be8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bec, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bf0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bf4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bf8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009bfc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aa00, 0x00000000, 0x00000000, 0x0000a120, 0x0000a120, 0x0000a120 },
+ { 0x0000aa04, 0x00000000, 0x00000000, 0x0000a124, 0x0000a124, 0x0000a124 },
+ { 0x0000aa08, 0x00000000, 0x00000000, 0x0000a128, 0x0000a128, 0x0000a128 },
+ { 0x0000aa0c, 0x00000000, 0x00000000, 0x0000a12c, 0x0000a12c, 0x0000a12c },
+ { 0x0000aa10, 0x00000000, 0x00000000, 0x0000a130, 0x0000a130, 0x0000a130 },
+ { 0x0000aa14, 0x00000000, 0x00000000, 0x0000a194, 0x0000a194, 0x0000a194 },
+ { 0x0000aa18, 0x00000000, 0x00000000, 0x0000a198, 0x0000a198, 0x0000a198 },
+ { 0x0000aa1c, 0x00000000, 0x00000000, 0x0000a20c, 0x0000a20c, 0x0000a20c },
+ { 0x0000aa20, 0x00000000, 0x00000000, 0x0000a210, 0x0000a210, 0x0000a210 },
+ { 0x0000aa24, 0x00000000, 0x00000000, 0x0000a284, 0x0000a284, 0x0000a284 },
+ { 0x0000aa28, 0x00000000, 0x00000000, 0x0000a288, 0x0000a288, 0x0000a288 },
+ { 0x0000aa2c, 0x00000000, 0x00000000, 0x0000a28c, 0x0000a28c, 0x0000a28c },
+ { 0x0000aa30, 0x00000000, 0x00000000, 0x0000a290, 0x0000a290, 0x0000a290 },
+ { 0x0000aa34, 0x00000000, 0x00000000, 0x0000a294, 0x0000a294, 0x0000a294 },
+ { 0x0000aa38, 0x00000000, 0x00000000, 0x0000a2a0, 0x0000a2a0, 0x0000a2a0 },
+ { 0x0000aa3c, 0x00000000, 0x00000000, 0x0000a2a4, 0x0000a2a4, 0x0000a2a4 },
+ { 0x0000aa40, 0x00000000, 0x00000000, 0x0000a2a8, 0x0000a2a8, 0x0000a2a8 },
+ { 0x0000aa44, 0x00000000, 0x00000000, 0x0000a2ac, 0x0000a2ac, 0x0000a2ac },
+ { 0x0000aa48, 0x00000000, 0x00000000, 0x0000a2b0, 0x0000a2b0, 0x0000a2b0 },
+ { 0x0000aa4c, 0x00000000, 0x00000000, 0x0000a2b4, 0x0000a2b4, 0x0000a2b4 },
+ { 0x0000aa50, 0x00000000, 0x00000000, 0x0000a2b8, 0x0000a2b8, 0x0000a2b8 },
+ { 0x0000aa54, 0x00000000, 0x00000000, 0x0000a2c4, 0x0000a2c4, 0x0000a2c4 },
+ { 0x0000aa58, 0x00000000, 0x00000000, 0x0000a708, 0x0000a708, 0x0000a708 },
+ { 0x0000aa5c, 0x00000000, 0x00000000, 0x0000a70c, 0x0000a70c, 0x0000a70c },
+ { 0x0000aa60, 0x00000000, 0x00000000, 0x0000a710, 0x0000a710, 0x0000a710 },
+ { 0x0000aa64, 0x00000000, 0x00000000, 0x0000ab04, 0x0000ab04, 0x0000ab04 },
+ { 0x0000aa68, 0x00000000, 0x00000000, 0x0000ab08, 0x0000ab08, 0x0000ab08 },
+ { 0x0000aa6c, 0x00000000, 0x00000000, 0x0000ab0c, 0x0000ab0c, 0x0000ab0c },
+ { 0x0000aa70, 0x00000000, 0x00000000, 0x0000ab10, 0x0000ab10, 0x0000ab10 },
+ { 0x0000aa74, 0x00000000, 0x00000000, 0x0000ab14, 0x0000ab14, 0x0000ab14 },
+ { 0x0000aa78, 0x00000000, 0x00000000, 0x0000ab18, 0x0000ab18, 0x0000ab18 },
+ { 0x0000aa7c, 0x00000000, 0x00000000, 0x0000ab8c, 0x0000ab8c, 0x0000ab8c },
+ { 0x0000aa80, 0x00000000, 0x00000000, 0x0000ab90, 0x0000ab90, 0x0000ab90 },
+ { 0x0000aa84, 0x00000000, 0x00000000, 0x0000ab94, 0x0000ab94, 0x0000ab94 },
+ { 0x0000aa88, 0x00000000, 0x00000000, 0x0000ab98, 0x0000ab98, 0x0000ab98 },
+ { 0x0000aa8c, 0x00000000, 0x00000000, 0x0000aba4, 0x0000aba4, 0x0000aba4 },
+ { 0x0000aa90, 0x00000000, 0x00000000, 0x0000aba8, 0x0000aba8, 0x0000aba8 },
+ { 0x0000aa94, 0x00000000, 0x00000000, 0x0000cb04, 0x0000cb04, 0x0000cb04 },
+ { 0x0000aa98, 0x00000000, 0x00000000, 0x0000cb08, 0x0000cb08, 0x0000cb08 },
+ { 0x0000aa9c, 0x00000000, 0x00000000, 0x0000cb0c, 0x0000cb0c, 0x0000cb0c },
+ { 0x0000aaa0, 0x00000000, 0x00000000, 0x0000cb10, 0x0000cb10, 0x0000cb10 },
+ { 0x0000aaa4, 0x00000000, 0x00000000, 0x0000cb14, 0x0000cb14, 0x0000cb14 },
+ { 0x0000aaa8, 0x00000000, 0x00000000, 0x0000cb18, 0x0000cb18, 0x0000cb18 },
+ { 0x0000aaac, 0x00000000, 0x00000000, 0x0000cb8c, 0x0000cb8c, 0x0000cb8c },
+ { 0x0000aab0, 0x00000000, 0x00000000, 0x0000cb90, 0x0000cb90, 0x0000cb90 },
+ { 0x0000aab4, 0x00000000, 0x00000000, 0x0000cf18, 0x0000cf18, 0x0000cf18 },
+ { 0x0000aab8, 0x00000000, 0x00000000, 0x0000cf24, 0x0000cf24, 0x0000cf24 },
+ { 0x0000aabc, 0x00000000, 0x00000000, 0x0000cf28, 0x0000cf28, 0x0000cf28 },
+ { 0x0000aac0, 0x00000000, 0x00000000, 0x0000d314, 0x0000d314, 0x0000d314 },
+ { 0x0000aac4, 0x00000000, 0x00000000, 0x0000d318, 0x0000d318, 0x0000d318 },
+ { 0x0000aac8, 0x00000000, 0x00000000, 0x0000d38c, 0x0000d38c, 0x0000d38c },
+ { 0x0000aacc, 0x00000000, 0x00000000, 0x0000d390, 0x0000d390, 0x0000d390 },
+ { 0x0000aad0, 0x00000000, 0x00000000, 0x0000d394, 0x0000d394, 0x0000d394 },
+ { 0x0000aad4, 0x00000000, 0x00000000, 0x0000d398, 0x0000d398, 0x0000d398 },
+ { 0x0000aad8, 0x00000000, 0x00000000, 0x0000d3a4, 0x0000d3a4, 0x0000d3a4 },
+ { 0x0000aadc, 0x00000000, 0x00000000, 0x0000d3a8, 0x0000d3a8, 0x0000d3a8 },
+ { 0x0000aae0, 0x00000000, 0x00000000, 0x0000d3ac, 0x0000d3ac, 0x0000d3ac },
+ { 0x0000aae4, 0x00000000, 0x00000000, 0x0000d3b0, 0x0000d3b0, 0x0000d3b0 },
+ { 0x0000aae8, 0x00000000, 0x00000000, 0x0000f380, 0x0000f380, 0x0000f380 },
+ { 0x0000aaec, 0x00000000, 0x00000000, 0x0000f384, 0x0000f384, 0x0000f384 },
+ { 0x0000aaf0, 0x00000000, 0x00000000, 0x0000f388, 0x0000f388, 0x0000f388 },
+ { 0x0000aaf4, 0x00000000, 0x00000000, 0x0000f710, 0x0000f710, 0x0000f710 },
+ { 0x0000aaf8, 0x00000000, 0x00000000, 0x0000f714, 0x0000f714, 0x0000f714 },
+ { 0x0000aafc, 0x00000000, 0x00000000, 0x0000f718, 0x0000f718, 0x0000f718 },
+ { 0x0000ab00, 0x00000000, 0x00000000, 0x0000fb10, 0x0000fb10, 0x0000fb10 },
+ { 0x0000ab04, 0x00000000, 0x00000000, 0x0000fb14, 0x0000fb14, 0x0000fb14 },
+ { 0x0000ab08, 0x00000000, 0x00000000, 0x0000fb18, 0x0000fb18, 0x0000fb18 },
+ { 0x0000ab0c, 0x00000000, 0x00000000, 0x0000fb8c, 0x0000fb8c, 0x0000fb8c },
+ { 0x0000ab10, 0x00000000, 0x00000000, 0x0000fb90, 0x0000fb90, 0x0000fb90 },
+ { 0x0000ab14, 0x00000000, 0x00000000, 0x0000fb94, 0x0000fb94, 0x0000fb94 },
+ { 0x0000ab18, 0x00000000, 0x00000000, 0x0000ff8c, 0x0000ff8c, 0x0000ff8c },
+ { 0x0000ab1c, 0x00000000, 0x00000000, 0x0000ff90, 0x0000ff90, 0x0000ff90 },
+ { 0x0000ab20, 0x00000000, 0x00000000, 0x0000ff94, 0x0000ff94, 0x0000ff94 },
+ { 0x0000ab24, 0x00000000, 0x00000000, 0x0000ffa0, 0x0000ffa0, 0x0000ffa0 },
+ { 0x0000ab28, 0x00000000, 0x00000000, 0x0000ffa4, 0x0000ffa4, 0x0000ffa4 },
+ { 0x0000ab2c, 0x00000000, 0x00000000, 0x0000ffa8, 0x0000ffa8, 0x0000ffa8 },
+ { 0x0000ab30, 0x00000000, 0x00000000, 0x0000ffac, 0x0000ffac, 0x0000ffac },
+ { 0x0000ab34, 0x00000000, 0x00000000, 0x0000ffb0, 0x0000ffb0, 0x0000ffb0 },
+ { 0x0000ab38, 0x00000000, 0x00000000, 0x0000ffb4, 0x0000ffb4, 0x0000ffb4 },
+ { 0x0000ab3c, 0x00000000, 0x00000000, 0x0000ffa1, 0x0000ffa1, 0x0000ffa1 },
+ { 0x0000ab40, 0x00000000, 0x00000000, 0x0000ffa5, 0x0000ffa5, 0x0000ffa5 },
+ { 0x0000ab44, 0x00000000, 0x00000000, 0x0000ffa9, 0x0000ffa9, 0x0000ffa9 },
+ { 0x0000ab48, 0x00000000, 0x00000000, 0x0000ffad, 0x0000ffad, 0x0000ffad },
+ { 0x0000ab4c, 0x00000000, 0x00000000, 0x0000ffb1, 0x0000ffb1, 0x0000ffb1 },
+ { 0x0000ab50, 0x00000000, 0x00000000, 0x0000ffb5, 0x0000ffb5, 0x0000ffb5 },
+ { 0x0000ab54, 0x00000000, 0x00000000, 0x0000ffb9, 0x0000ffb9, 0x0000ffb9 },
+ { 0x0000ab58, 0x00000000, 0x00000000, 0x0000ffc5, 0x0000ffc5, 0x0000ffc5 },
+ { 0x0000ab5c, 0x00000000, 0x00000000, 0x0000ffc9, 0x0000ffc9, 0x0000ffc9 },
+ { 0x0000ab60, 0x00000000, 0x00000000, 0x0000ffcd, 0x0000ffcd, 0x0000ffcd },
+ { 0x0000ab64, 0x00000000, 0x00000000, 0x0000ffd1, 0x0000ffd1, 0x0000ffd1 },
+ { 0x0000ab68, 0x00000000, 0x00000000, 0x0000ffd5, 0x0000ffd5, 0x0000ffd5 },
+ { 0x0000ab6c, 0x00000000, 0x00000000, 0x0000ffc2, 0x0000ffc2, 0x0000ffc2 },
+ { 0x0000ab70, 0x00000000, 0x00000000, 0x0000ffc6, 0x0000ffc6, 0x0000ffc6 },
+ { 0x0000ab74, 0x00000000, 0x00000000, 0x0000ffca, 0x0000ffca, 0x0000ffca },
+ { 0x0000ab78, 0x00000000, 0x00000000, 0x0000ffce, 0x0000ffce, 0x0000ffce },
+ { 0x0000ab7c, 0x00000000, 0x00000000, 0x0000ffd2, 0x0000ffd2, 0x0000ffd2 },
+ { 0x0000ab80, 0x00000000, 0x00000000, 0x0000ffd6, 0x0000ffd6, 0x0000ffd6 },
+ { 0x0000ab84, 0x00000000, 0x00000000, 0x0000ffda, 0x0000ffda, 0x0000ffda },
+ { 0x0000ab88, 0x00000000, 0x00000000, 0x0000ffc7, 0x0000ffc7, 0x0000ffc7 },
+ { 0x0000ab8c, 0x00000000, 0x00000000, 0x0000ffcb, 0x0000ffcb, 0x0000ffcb },
+ { 0x0000ab90, 0x00000000, 0x00000000, 0x0000ffcf, 0x0000ffcf, 0x0000ffcf },
+ { 0x0000ab94, 0x00000000, 0x00000000, 0x0000ffd3, 0x0000ffd3, 0x0000ffd3 },
+ { 0x0000ab98, 0x00000000, 0x00000000, 0x0000ffd7, 0x0000ffd7, 0x0000ffd7 },
+ { 0x0000ab9c, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aba0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aba4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000aba8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abac, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abb0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abb4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abb8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abbc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abc0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abc4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abc8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abcc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abd0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abd4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abd8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abdc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abe0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abe4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abe8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abec, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abf0, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abf4, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abf8, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x0000abfc, 0x00000000, 0x00000000, 0x0000ffdb, 0x0000ffdb, 0x0000ffdb },
+ { 0x00009848, 0x00000000, 0x00000000, 0x00001067, 0x00001067, 0x00001067 },
+ { 0x0000a848, 0x00000000, 0x00000000, 0x00001067, 0x00001067, 0x00001067 },
+};
+
+static const u_int32_t ar9287PciePhy_clkreq_always_on_L1_9287_1_1[][2] = {
+ {0x00004040, 0x9248fd00 },
+ {0x00004040, 0x24924924 },
+ {0x00004040, 0xa8000019 },
+ {0x00004040, 0x13160820 },
+ {0x00004040, 0xe5980560 },
+ {0x00004040, 0xc01dcffd },
+ {0x00004040, 0x1aaabe41 },
+ {0x00004040, 0xbe105554 },
+ {0x00004040, 0x00043007 },
+ {0x00004044, 0x00000000 },
+};
+
+static const u_int32_t ar9287PciePhy_clkreq_off_L1_9287_1_1[][2] = {
+ {0x00004040, 0x9248fd00 },
+ {0x00004040, 0x24924924 },
+ {0x00004040, 0xa8000019 },
+ {0x00004040, 0x13160820 },
+ {0x00004040, 0xe5980560 },
+ {0x00004040, 0xc01dcffc },
+ {0x00004040, 0x1aaabe41 },
+ {0x00004040, 0xbe105554 },
+ {0x00004040, 0x00043007 },
+ {0x00004044, 0x00000000 },
+};
+
+
+/* AR9271 initialization values automaticaly created: 03/23/09 */
+static const u_int32_t ar9271Modes_9271_1_0[][6] = {
{ 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
{ 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
{ 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
@@ -4139,10 +6383,11 @@
{ 0x00009840, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e },
{ 0x00009844, 0x0372161e, 0x0372161e, 0x03721620, 0x03721620, 0x037216a0 },
{ 0x00009848, 0x00001066, 0x00001066, 0x00001053, 0x00001053, 0x00001059 },
+ { 0x0000a848, 0x00001066, 0x00001066, 0x00001053, 0x00001053, 0x00001059 },
{ 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 },
{ 0x00009858, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e },
{ 0x0000985c, 0x3139605e, 0x3139605e, 0x3137605e, 0x3137605e, 0x3139605e },
- { 0x00009860, 0x00058d18, 0x00058d18, 0x00058d20, 0x00058d20, 0x00058d18 },
+ { 0x00009860, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18, 0x00058d18 },
{ 0x00009864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
{ 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
{ 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
@@ -4419,13 +6664,33 @@
{ 0x0000abfc, 0x00000000, 0x00000000, 0x000eb7db, 0x000eb7db, 0x00000000 },
{ 0x0000a204, 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 },
{ 0x0000a20c, 0x00000014, 0x00000014, 0x0001f000, 0x0001f000, 0x0001f000 },
+ { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f000, 0x0001f000, 0x0001f000 },
{ 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
{ 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
{ 0x0000a250, 0x0004f000, 0x0004f000, 0x0004a000, 0x0004a000, 0x0004a000 },
+ { 0x0000a274, 0x0a21c652, 0x0a21c652, 0x0a218652, 0x0a218652, 0x0a22a652 },
+ { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
+ { 0x0000a304, 0x00000000, 0x00000000, 0x00009200, 0x00009200, 0x00000000 },
+ { 0x0000a308, 0x00000000, 0x00000000, 0x00010208, 0x00010208, 0x00000000 },
+ { 0x0000a30c, 0x00000000, 0x00000000, 0x00019608, 0x00019608, 0x00000000 },
+ { 0x0000a310, 0x00000000, 0x00000000, 0x0001e610, 0x0001e610, 0x00000000 },
+ { 0x0000a314, 0x00000000, 0x00000000, 0x0002d6d0, 0x0002d6d0, 0x00000000 },
+ { 0x0000a318, 0x00000000, 0x00000000, 0x00039758, 0x00039758, 0x00000000 },
+ { 0x0000a31c, 0x00000000, 0x00000000, 0x0003b759, 0x0003b759, 0x00000000 },
+ { 0x0000a320, 0x00000000, 0x00000000, 0x0003d75a, 0x0003d75a, 0x00000000 },
+ { 0x0000a324, 0x00000000, 0x00000000, 0x0004175c, 0x0004175c, 0x00000000 },
+ { 0x0000a328, 0x00000000, 0x00000000, 0x0004575e, 0x0004575e, 0x00000000 },
+ { 0x0000a32c, 0x00000000, 0x00000000, 0x0004979f, 0x0004979f, 0x00000000 },
+ { 0x0000a330, 0x00000000, 0x00000000, 0x0004d7df, 0x0004d7df, 0x00000000 },
+ { 0x0000a334, 0x000368de, 0x000368de, 0x000368de, 0x000368de, 0x00000000 },
+ { 0x0000a338, 0x0003891e, 0x0003891e, 0x0003891e, 0x0003891e, 0x00000000 },
+ { 0x0000a33c, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x00000000 },
+ { 0x0000a340, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
+ { 0x0000a344, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
{ 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
};
-static const u_int32_t ar9285Common_9285_1_2[][2] = {
+static const u_int32_t ar9271Common_9271_1_0[][2] = {
{ 0x0000000c, 0x00000000 },
{ 0x00000030, 0x00020045 },
{ 0x00000034, 0x00000005 },
@@ -4512,9 +6777,6 @@
{ 0x00004024, 0x0000001f },
{ 0x00004060, 0x00000000 },
{ 0x00004064, 0x00000000 },
- { 0x00007010, 0x00000031 },
- { 0x00007034, 0x00000002 },
- { 0x00007038, 0x000004c2 },
{ 0x00008004, 0x00000000 },
{ 0x00008008, 0x00000000 },
{ 0x0000800c, 0x00000000 },
@@ -4524,11 +6786,15 @@
{ 0x0000803c, 0x00000000 },
{ 0x00008048, 0x00000000 },
{ 0x00008054, 0x00000000 },
- { 0x00008058, 0x00000000 },
+ { 0x00008058, 0x02000000 },
{ 0x0000805c, 0x000fc78f },
{ 0x00008060, 0x0000000f },
{ 0x00008064, 0x00000000 },
{ 0x00008070, 0x00000000 },
+ { 0x000080b0, 0x00000000 },
+ { 0x000080b4, 0x00000000 },
+ { 0x000080b8, 0x00000000 },
+ { 0x000080bc, 0x00000000 },
{ 0x000080c0, 0x2a80001a },
{ 0x000080c4, 0x05dc01e0 },
{ 0x000080c8, 0x1f402710 },
@@ -4551,7 +6817,7 @@
{ 0x00008110, 0x00000168 },
{ 0x00008118, 0x000100aa },
{ 0x0000811c, 0x00003210 },
- { 0x00008120, 0x08f04810 },
+ { 0x00008120, 0x08f04814 },
{ 0x00008124, 0x00000000 },
{ 0x00008128, 0x00000000 },
{ 0x0000812c, 0x00000000 },
@@ -4619,6 +6885,37 @@
{ 0x0000833c, 0x00000000 },
{ 0x00008340, 0x00010380 },
{ 0x00008344, 0x00581043 },
+ { 0x00007010, 0x00000030 },
+ { 0x00007034, 0x00000002 },
+ { 0x00007038, 0x000004c2 },
+ { 0x00007800, 0x00140000 },
+ { 0x00007804, 0x0e4548d8 },
+ { 0x00007808, 0x54214514 },
+ { 0x0000780c, 0x02025820 },
+ { 0x00007810, 0x71c0d388 },
+ { 0x00007814, 0x924934a8 },
+ { 0x0000781c, 0x00000000 },
+ { 0x00007820, 0x00000c04 },
+ { 0x00007824, 0x00d86bff },
+ { 0x00007828, 0x66964300 },
+ { 0x0000782c, 0x8db6d961 },
+ { 0x00007830, 0x8db6d96c },
+ { 0x00007834, 0x6140008b },
+ { 0x00007838, 0x00000029 },
+ { 0x0000783c, 0x72ee0a72 },
+ { 0x00007840, 0xbbfffffc },
+ { 0x00007844, 0x000c0db6 },
+ { 0x00007848, 0x6db61b6f },
+ { 0x0000784c, 0x6d9b66db },
+ { 0x00007850, 0x6d8c6dba },
+ { 0x00007854, 0x00040000 },
+ { 0x00007858, 0xdb003012 },
+ { 0x0000785c, 0x04924914 },
+ { 0x00007860, 0x21084210 },
+ { 0x00007864, 0xf7d7ffde },
+ { 0x00007868, 0xc2034080 },
+ { 0x0000786c, 0x48609eb4 },
+ { 0x00007870, 0x10142c00 },
{ 0x00009808, 0x00000000 },
{ 0x0000980c, 0xafe68e30 },
{ 0x00009810, 0xfd14e000 },
@@ -4633,7 +6930,7 @@
{ 0x00009904, 0x00000000 },
{ 0x00009908, 0x00000000 },
{ 0x0000990c, 0x00000000 },
- { 0x00009910, 0x01002310 },
+ { 0x00009910, 0x30002310 },
{ 0x0000991c, 0x10000fff },
{ 0x00009920, 0x04900000 },
{ 0x00009928, 0x00000001 },
@@ -4645,7 +6942,7 @@
{ 0x00009948, 0x9280c00a },
{ 0x0000994c, 0x00020028 },
{ 0x00009954, 0x5f3ca3de },
- { 0x00009958, 0x2108ecff },
+ { 0x00009958, 0x0108ecff },
{ 0x00009968, 0x000003ce },
{ 0x00009970, 0x192bb515 },
{ 0x00009974, 0x00000000 },
@@ -4671,6 +6968,9 @@
{ 0x000099e8, 0x3c466478 },
{ 0x000099ec, 0x0cc80caa },
{ 0x000099f0, 0x00000000 },
+ { 0x0000a1f4, 0x00000000 },
+ { 0x0000a1f8, 0x71733d01 },
+ { 0x0000a1fc, 0xd0ad5c12 },
{ 0x0000a208, 0x803e68c8 },
{ 0x0000a210, 0x4080a333 },
{ 0x0000a214, 0x00206c10 },
@@ -4690,21 +6990,13 @@
{ 0x0000a260, 0xdfa90f01 },
{ 0x0000a268, 0x00000000 },
{ 0x0000a26c, 0x0ebae9e6 },
- { 0x0000d270, 0x0d820820 },
- { 0x0000d35c, 0x07ffffef },
- { 0x0000d360, 0x0fffffe7 },
- { 0x0000d364, 0x17ffffe5 },
- { 0x0000d368, 0x1fffffe4 },
- { 0x0000d36c, 0x37ffffe3 },
- { 0x0000d370, 0x3fffffe3 },
- { 0x0000d374, 0x57ffffe3 },
- { 0x0000d378, 0x5fffffe2 },
- { 0x0000d37c, 0x7fffffe2 },
- { 0x0000d380, 0x7f3c7bba },
- { 0x0000d384, 0xf3307ff0 },
+ { 0x0000a278, 0x3bdef7bd },
+ { 0x0000a27c, 0x050e83bd },
{ 0x0000a388, 0x0c000000 },
{ 0x0000a38c, 0x20202020 },
{ 0x0000a390, 0x20202020 },
+ { 0x0000a394, 0x3bdef7bd },
+ { 0x0000a398, 0x000003bd },
{ 0x0000a39c, 0x00000001 },
{ 0x0000a3a0, 0x00000000 },
{ 0x0000a3a4, 0x00000000 },
@@ -4719,130 +7011,23 @@
{ 0x0000a3cc, 0x20202020 },
{ 0x0000a3d0, 0x20202020 },
{ 0x0000a3d4, 0x20202020 },
+ { 0x0000a3dc, 0x3bdef7bd },
+ { 0x0000a3e0, 0x000003bd },
{ 0x0000a3e4, 0x00000000 },
{ 0x0000a3e8, 0x18c43433 },
{ 0x0000a3ec, 0x00f70081 },
- { 0x00007800, 0x00140000 },
- { 0x00007804, 0x0e4548d8 },
- { 0x00007808, 0x54214514 },
- { 0x0000780c, 0x02025820 },
- { 0x00007810, 0x71c0d388 },
- { 0x00007814, 0x924934a8 },
- { 0x0000781c, 0x00000000 },
- { 0x00007824, 0x00d86fff },
- { 0x00007828, 0x26d2491b },
- { 0x0000782c, 0x6e36d97b },
- { 0x00007830, 0xedb6d96e },
- { 0x00007834, 0x71400087 },
- { 0x0000783c, 0x0001fffe },
- { 0x00007840, 0xffeb1a20 },
- { 0x00007844, 0x000c0db6 },
- { 0x00007848, 0x6db61b6f },
- { 0x0000784c, 0x6d9b66db },
- { 0x00007850, 0x6d8c6dba },
- { 0x00007854, 0x00040000 },
- { 0x00007858, 0xdb003012 },
- { 0x0000785c, 0x04924914 },
- { 0x00007860, 0x21084210 },
- { 0x00007864, 0xf7d7ffde },
- { 0x00007868, 0xc2034080 },
- { 0x00007870, 0x10142c00 },
-};
-
-static const u_int32_t ar9285Modes_high_power_tx_gain_9285_1_2[][6] = {
- /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
- { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
- { 0x0000a304, 0x00000000, 0x00000000, 0x00005200, 0x00005200, 0x00000000 },
- { 0x0000a308, 0x00000000, 0x00000000, 0x00007201, 0x00007201, 0x00000000 },
- { 0x0000a30c, 0x00000000, 0x00000000, 0x0000b240, 0x0000b240, 0x00000000 },
- { 0x0000a310, 0x00000000, 0x00000000, 0x0000d241, 0x0000d241, 0x00000000 },
- { 0x0000a314, 0x00000000, 0x00000000, 0x0000f440, 0x0000f440, 0x00000000 },
- { 0x0000a318, 0x00000000, 0x00000000, 0x00014640, 0x00014640, 0x00000000 },
- { 0x0000a31c, 0x00000000, 0x00000000, 0x00018680, 0x00018680, 0x00000000 },
- { 0x0000a320, 0x00000000, 0x00000000, 0x00019841, 0x00019841, 0x00000000 },
- { 0x0000a324, 0x00000000, 0x00000000, 0x0001ca40, 0x0001ca40, 0x00000000 },
- { 0x0000a328, 0x00000000, 0x00000000, 0x0001fa80, 0x0001fa80, 0x00000000 },
- { 0x0000a32c, 0x00000000, 0x00000000, 0x00023ac0, 0x00023ac0, 0x00000000 },
- { 0x0000a330, 0x00000000, 0x00000000, 0x0002ab40, 0x0002ab40, 0x00000000 },
- { 0x0000a334, 0x00000000, 0x00000000, 0x00033d82, 0x00033d82, 0x00000000 },
- { 0x0000a338, 0x0003891e, 0x0003891e, 0x0003891e, 0x0003891e, 0x00000000 },
- { 0x0000a33c, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x00000000 },
- { 0x0000a340, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a344, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a348, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a34c, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a350, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a354, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x00007838, 0xfac68803, 0xfac68803, 0xfac68803, 0xfac68803, 0xfac68803 },
- { 0x0000786c, 0x08609ebe, 0x08609ebe, 0x08609ebe, 0x08609ebe, 0x08609ebe },
- { 0x00007820, 0x00000c00, 0x00000c00, 0x00000c00, 0x00000c00, 0x00000c00 },
- { 0x0000a274, 0x0a22a652, 0x0a22a652, 0x0a21a652, 0x0a21a652, 0x0a22a652 },
- { 0x0000a278, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce },
- { 0x0000a27c, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce },
- { 0x0000a394, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce },
- { 0x0000a398, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce },
- { 0x0000a3dc, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce },
- { 0x0000a3e0, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce },
-};
-
-static const u_int32_t ar9285Modes_original_tx_gain_9285_1_2[][6] = {
- /* Address 5G-HT20 5G-HT40 2G-HT40 2G-HT20 Turbo */
- { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
- { 0x0000a304, 0x00000000, 0x00000000, 0x00009200, 0x00009200, 0x00000000 },
- { 0x0000a308, 0x00000000, 0x00000000, 0x00010208, 0x00010208, 0x00000000 },
- { 0x0000a30c, 0x00000000, 0x00000000, 0x00019608, 0x00019608, 0x00000000 },
- { 0x0000a310, 0x00000000, 0x00000000, 0x00022618, 0x00022618, 0x00000000 },
- { 0x0000a314, 0x00000000, 0x00000000, 0x0002a6c9, 0x0002a6c9, 0x00000000 },
- { 0x0000a318, 0x00000000, 0x00000000, 0x00031710, 0x00031710, 0x00000000 },
- { 0x0000a31c, 0x00000000, 0x00000000, 0x00035718, 0x00035718, 0x00000000 },
- { 0x0000a320, 0x00000000, 0x00000000, 0x00038758, 0x00038758, 0x00000000 },
- { 0x0000a324, 0x00000000, 0x00000000, 0x0003c75a, 0x0003c75a, 0x00000000 },
- { 0x0000a328, 0x00000000, 0x00000000, 0x0004075c, 0x0004075c, 0x00000000 },
- { 0x0000a32c, 0x00000000, 0x00000000, 0x0004475e, 0x0004475e, 0x00000000 },
- { 0x0000a330, 0x00000000, 0x00000000, 0x0004679f, 0x0004679f, 0x00000000 },
- { 0x0000a334, 0x00000000, 0x00000000, 0x000487df, 0x000487df, 0x00000000 },
- { 0x0000a338, 0x0003891e, 0x0003891e, 0x0003891e, 0x0003891e, 0x00000000 },
- { 0x0000a33c, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x0003a95e, 0x00000000 },
- { 0x0000a340, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a344, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a348, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a34c, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a350, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x0000a354, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x0003e9df, 0x00000000 },
- { 0x00007838, 0xfac68801, 0xfac68801, 0xfac68801, 0xfac68801, 0xfac68801 },
- { 0x0000786c, 0x48609eb4, 0x48609eb4, 0x48609eb4, 0x48609eb4, 0x48609eb4 },
- { 0x00007820, 0x00000c04, 0x00000c04, 0x00000c04, 0x00000c04, 0x00000c04 },
- { 0x0000a274, 0x0a21c652, 0x0a21c652, 0x0a21a652, 0x0a21a652, 0x0a22a652 },
- { 0x0000a278, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c },
- { 0x0000a27c, 0x050e039c, 0x050e039c, 0x050e039c, 0x050e039c, 0x050e039c },
- { 0x0000a394, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c },
- { 0x0000a398, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c },
- { 0x0000a3dc, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c, 0x39ce739c },
- { 0x0000a3e0, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c, 0x0000039c },
-};
-
-static const u_int32_t ar9285PciePhy_clkreq_always_on_L1_9285_1_2[][2] = {
- {0x00004040, 0x9248fd00 },
- {0x00004040, 0x24924924 },
- {0x00004040, 0xa8000019 },
- {0x00004040, 0x13160820 },
- {0x00004040, 0xe5980560 },
- {0x00004040, 0xc01dcffd },
- {0x00004040, 0x1aaabe41 },
- {0x00004040, 0xbe105554 },
- {0x00004040, 0x00043007 },
- {0x00004044, 0x00000000 },
-};
-
-static const u_int32_t ar9285PciePhy_clkreq_off_L1_9285_1_2[][2] = {
- {0x00004040, 0x9248fd00 },
- {0x00004040, 0x24924924 },
- {0x00004040, 0xa8000019 },
- {0x00004040, 0x13160820 },
- {0x00004040, 0xe5980560 },
- {0x00004040, 0xc01dcffc },
- {0x00004040, 0x1aaabe41 },
- {0x00004040, 0xbe105554 },
- {0x00004040, 0x00043007 },
- {0x00004044, 0x00000000 },
+ { 0x0000a3f0, 0x01036a2f },
+ { 0x0000a3f4, 0x00000000 },
+ { 0x0000d270, 0x0d820820 },
+ { 0x0000d35c, 0x07ffffef },
+ { 0x0000d360, 0x0fffffe7 },
+ { 0x0000d364, 0x17ffffe5 },
+ { 0x0000d368, 0x1fffffe4 },
+ { 0x0000d36c, 0x37ffffe3 },
+ { 0x0000d370, 0x3fffffe3 },
+ { 0x0000d374, 0x57ffffe3 },
+ { 0x0000d378, 0x5fffffe2 },
+ { 0x0000d37c, 0x7fffffe2 },
+ { 0x0000d380, 0x7f3c7bba },
+ { 0x0000d384, 0xf3307ff0 },
};
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 8ae4ec2..800bfab 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -40,20 +40,15 @@
return REG_READ(ah, AR_QTXDP(q));
}
-bool ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp)
+void ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp)
{
REG_WRITE(ah, AR_QTXDP(q), txdp);
-
- return true;
}
-bool ath9k_hw_txstart(struct ath_hw *ah, u32 q)
+void ath9k_hw_txstart(struct ath_hw *ah, u32 q)
{
DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Enable TXE on queue: %u\n", q);
-
REG_WRITE(ah, AR_Q_TXE, 1 << q);
-
- return true;
}
u32 ath9k_hw_numtxpending(struct ath_hw *ah, u32 q)
@@ -178,7 +173,7 @@
#undef ATH9K_TIME_QUANTUM
}
-bool ath9k_hw_filltxdesc(struct ath_hw *ah, struct ath_desc *ds,
+void ath9k_hw_filltxdesc(struct ath_hw *ah, struct ath_desc *ds,
u32 segLen, bool firstSeg,
bool lastSeg, const struct ath_desc *ds0)
{
@@ -202,8 +197,6 @@
ads->ds_txstatus4 = ads->ds_txstatus5 = 0;
ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
-
- return true;
}
void ath9k_hw_cleartxdesc(struct ath_hw *ah, struct ath_desc *ds)
@@ -825,13 +818,29 @@
ds->ds_rxstat.rs_datalen = ads.ds_rxstatus1 & AR_DataLen;
ds->ds_rxstat.rs_tstamp = ads.AR_RcvTimestamp;
- ds->ds_rxstat.rs_rssi = MS(ads.ds_rxstatus4, AR_RxRSSICombined);
- ds->ds_rxstat.rs_rssi_ctl0 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt00);
- ds->ds_rxstat.rs_rssi_ctl1 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt01);
- ds->ds_rxstat.rs_rssi_ctl2 = MS(ads.ds_rxstatus0, AR_RxRSSIAnt02);
- ds->ds_rxstat.rs_rssi_ext0 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt10);
- ds->ds_rxstat.rs_rssi_ext1 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt11);
- ds->ds_rxstat.rs_rssi_ext2 = MS(ads.ds_rxstatus4, AR_RxRSSIAnt12);
+ if (ads.ds_rxstatus8 & AR_PostDelimCRCErr) {
+ ds->ds_rxstat.rs_rssi = ATH9K_RSSI_BAD;
+ ds->ds_rxstat.rs_rssi_ctl0 = ATH9K_RSSI_BAD;
+ ds->ds_rxstat.rs_rssi_ctl1 = ATH9K_RSSI_BAD;
+ ds->ds_rxstat.rs_rssi_ctl2 = ATH9K_RSSI_BAD;
+ ds->ds_rxstat.rs_rssi_ext0 = ATH9K_RSSI_BAD;
+ ds->ds_rxstat.rs_rssi_ext1 = ATH9K_RSSI_BAD;
+ ds->ds_rxstat.rs_rssi_ext2 = ATH9K_RSSI_BAD;
+ } else {
+ ds->ds_rxstat.rs_rssi = MS(ads.ds_rxstatus4, AR_RxRSSICombined);
+ ds->ds_rxstat.rs_rssi_ctl0 = MS(ads.ds_rxstatus0,
+ AR_RxRSSIAnt00);
+ ds->ds_rxstat.rs_rssi_ctl1 = MS(ads.ds_rxstatus0,
+ AR_RxRSSIAnt01);
+ ds->ds_rxstat.rs_rssi_ctl2 = MS(ads.ds_rxstatus0,
+ AR_RxRSSIAnt02);
+ ds->ds_rxstat.rs_rssi_ext0 = MS(ads.ds_rxstatus4,
+ AR_RxRSSIAnt10);
+ ds->ds_rxstat.rs_rssi_ext1 = MS(ads.ds_rxstatus4,
+ AR_RxRSSIAnt11);
+ ds->ds_rxstat.rs_rssi_ext2 = MS(ads.ds_rxstatus4,
+ AR_RxRSSIAnt12);
+ }
if (ads.ds_rxstatus8 & AR_RxKeyIdxValid)
ds->ds_rxstat.rs_keyix = MS(ads.ds_rxstatus8, AR_KeyIdx);
else
@@ -872,7 +881,7 @@
return 0;
}
-bool ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
+void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
u32 size, u32 flags)
{
struct ar5416_desc *ads = AR5416DESC(ds);
@@ -885,8 +894,6 @@
ads->ds_rxstatus8 &= ~AR_RxDone;
if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
memset(&(ads->u), 0, sizeof(ads->u));
-
- return true;
}
bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 1176bce..f56e77d 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -568,6 +568,7 @@
ATH9K_RX_FILTER_PROBEREQ = 0x00000080,
ATH9K_RX_FILTER_PHYERR = 0x00000100,
ATH9K_RX_FILTER_MYBEACON = 0x00000200,
+ ATH9K_RX_FILTER_COMP_BAR = 0x00000400,
ATH9K_RX_FILTER_PSPOLL = 0x00004000,
ATH9K_RX_FILTER_PHYRADAR = 0x00002000,
ATH9K_RX_FILTER_MCAST_BCAST_ALL = 0x00008000,
@@ -628,12 +629,12 @@
struct ath_rate_table;
u32 ath9k_hw_gettxbuf(struct ath_hw *ah, u32 q);
-bool ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp);
-bool ath9k_hw_txstart(struct ath_hw *ah, u32 q);
+void ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp);
+void ath9k_hw_txstart(struct ath_hw *ah, u32 q);
u32 ath9k_hw_numtxpending(struct ath_hw *ah, u32 q);
bool ath9k_hw_updatetxtriglevel(struct ath_hw *ah, bool bIncTrigLevel);
bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q);
-bool ath9k_hw_filltxdesc(struct ath_hw *ah, struct ath_desc *ds,
+void ath9k_hw_filltxdesc(struct ath_hw *ah, struct ath_desc *ds,
u32 segLen, bool firstSeg,
bool lastSeg, const struct ath_desc *ds0);
void ath9k_hw_cleartxdesc(struct ath_hw *ah, struct ath_desc *ds);
@@ -668,7 +669,7 @@
bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q);
int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
u32 pa, struct ath_desc *nds, u64 tsf);
-bool ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
+void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
u32 size, u32 flags);
bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set);
void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 66a6c1f..3dc7b5a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -17,8 +17,6 @@
#include <linux/nl80211.h>
#include "ath9k.h"
-#define ATH_PCI_VERSION "0.1"
-
static char *dev_info = "ath9k";
MODULE_AUTHOR("Atheros Communications");
@@ -342,6 +340,7 @@
* don't calibrate when we're scanning.
* we are most likely not on our home channel.
*/
+ spin_lock(&sc->ani_lock);
if (sc->sc_flags & SC_OP_SCANNING)
goto set_timer;
@@ -385,7 +384,7 @@
if (longcal || shortcal || aniflag) {
/* Call ANI routine if necessary */
if (aniflag)
- ath9k_hw_ani_monitor(ah, &sc->nodestats, ah->curchan);
+ ath9k_hw_ani_monitor(ah, ah->curchan);
/* Perform calibration if necessary */
if (longcal || shortcal) {
@@ -405,6 +404,7 @@
ath9k_ps_restore(sc);
set_timer:
+ spin_unlock(&sc->ani_lock);
/*
* Set timer interval based on previous results.
* The interval must be the shortest necessary to satisfy ANI,
@@ -439,8 +439,8 @@
*/
void ath_update_chainmask(struct ath_softc *sc, int is_ht)
{
- if (is_ht ||
- (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
+ if ((sc->sc_flags & SC_OP_SCANNING) || is_ht ||
+ (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE)) {
sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
} else {
@@ -460,9 +460,10 @@
if (sc->sc_flags & SC_OP_TXAGGR) {
ath_tx_node_init(sc, an);
- an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+ an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
sta->ht_cap.ampdu_factor);
an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+ an->last_rssi = ATH_RSSI_DUMMY_MARKER;
}
}
@@ -496,8 +497,7 @@
if (status & ATH9K_INT_TX)
ath_tx_tasklet(sc);
- if ((status & ATH9K_INT_TSFOOR) &&
- (sc->hw->conf.flags & IEEE80211_CONF_PS)) {
+ if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
/*
* TSF sync does not look correct; remain awake to sync with
* the next Beacon.
@@ -506,6 +506,10 @@
sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
}
+ if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
+ if (status & ATH9K_INT_GENTIMER)
+ ath_gen_timer_isr(sc->sc_ah);
+
/* re-enable hardware interrupt */
ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
ath9k_ps_restore(sc);
@@ -521,7 +525,8 @@
ATH9K_INT_TX | \
ATH9K_INT_BMISS | \
ATH9K_INT_CST | \
- ATH9K_INT_TSFOOR)
+ ATH9K_INT_TSFOOR | \
+ ATH9K_INT_GENTIMER)
struct ath_softc *sc = dev;
struct ath_hw *ah = sc->sc_ah;
@@ -589,7 +594,7 @@
* it will clear whatever condition caused
* the interrupt.
*/
- ath9k_hw_procmibevent(ah, &sc->nodestats);
+ ath9k_hw_procmibevent(ah);
ath9k_hw_set_interrupts(ah, sc->imask);
}
@@ -885,8 +890,7 @@
static void setup_ht_cap(struct ath_softc *sc,
struct ieee80211_sta_ht_cap *ht_info)
{
-#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
-#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
+ u8 tx_streams, rx_streams;
ht_info->ht_supported = true;
ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
@@ -894,64 +898,61 @@
IEEE80211_HT_CAP_SGI_40 |
IEEE80211_HT_CAP_DSSSCCK40;
- ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
- ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
+ ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
/* set up supported mcs set */
memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+ tx_streams = !(sc->tx_chainmask & (sc->tx_chainmask - 1)) ? 1 : 2;
+ rx_streams = !(sc->rx_chainmask & (sc->rx_chainmask - 1)) ? 1 : 2;
- switch(sc->rx_chainmask) {
- case 1:
- ht_info->mcs.rx_mask[0] = 0xff;
- break;
- case 3:
- case 5:
- case 7:
- default:
- ht_info->mcs.rx_mask[0] = 0xff;
- ht_info->mcs.rx_mask[1] = 0xff;
- break;
+ if (tx_streams != rx_streams) {
+ DPRINTF(sc, ATH_DBG_CONFIG, "TX streams %d, RX streams: %d\n",
+ tx_streams, rx_streams);
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+ ht_info->mcs.tx_params |= ((tx_streams - 1) <<
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
}
- ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ ht_info->mcs.rx_mask[0] = 0xff;
+ if (rx_streams >= 2)
+ ht_info->mcs.rx_mask[1] = 0xff;
+
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
}
static void ath9k_bss_assoc_info(struct ath_softc *sc,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
{
- struct ath_vif *avp = (void *)vif->drv_priv;
if (bss_conf->assoc) {
DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, sc->curbssid);
/* New association, store aid */
- if (avp->av_opmode == NL80211_IFTYPE_STATION) {
- sc->curaid = bss_conf->aid;
- ath9k_hw_write_associd(sc);
+ sc->curaid = bss_conf->aid;
+ ath9k_hw_write_associd(sc);
- /*
- * Request a re-configuration of Beacon related timers
- * on the receipt of the first Beacon frame (i.e.,
- * after time sync with the AP).
- */
- sc->sc_flags |= SC_OP_BEACON_SYNC;
- }
+ /*
+ * Request a re-configuration of Beacon related timers
+ * on the receipt of the first Beacon frame (i.e.,
+ * after time sync with the AP).
+ */
+ sc->sc_flags |= SC_OP_BEACON_SYNC;
/* Configure the beacon */
ath_beacon_config(sc, vif);
/* Reset rssi stats */
- sc->nodestats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
- sc->nodestats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
- sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
- sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
+ sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
ath_start_ani(sc);
} else {
DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
sc->curaid = 0;
+ /* Stop ANI */
+ del_timer_sync(&sc->ani.timer);
}
}
@@ -969,15 +970,16 @@
if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
(sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
else
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin,
(sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
- queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work,
- (sc->sc_flags & SC_OP_LED_ON) ?
- msecs_to_jiffies(sc->led_off_duration) :
- msecs_to_jiffies(sc->led_on_duration));
+ ieee80211_queue_delayed_work(sc->hw,
+ &sc->ath_led_blink_work,
+ (sc->sc_flags & SC_OP_LED_ON) ?
+ msecs_to_jiffies(sc->led_off_duration) :
+ msecs_to_jiffies(sc->led_on_duration));
sc->led_on_duration = sc->led_on_cnt ?
max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) :
@@ -1002,7 +1004,7 @@
case LED_OFF:
if (led->led_type == ATH_LED_ASSOC ||
led->led_type == ATH_LED_RADIO) {
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin,
(led->led_type == ATH_LED_RADIO));
sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
if (led->led_type == ATH_LED_RADIO)
@@ -1014,10 +1016,10 @@
case LED_FULL:
if (led->led_type == ATH_LED_ASSOC) {
sc->sc_flags |= SC_OP_LED_ASSOCIATED;
- queue_delayed_work(sc->hw->workqueue,
- &sc->ath_led_blink_work, 0);
+ ieee80211_queue_delayed_work(sc->hw,
+ &sc->ath_led_blink_work, 0);
} else if (led->led_type == ATH_LED_RADIO) {
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
sc->sc_flags |= SC_OP_LED_ON;
} else {
sc->led_on_cnt++;
@@ -1057,13 +1059,12 @@
static void ath_deinit_leds(struct ath_softc *sc)
{
- cancel_delayed_work_sync(&sc->ath_led_blink_work);
ath_unregister_led(&sc->assoc_led);
sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
ath_unregister_led(&sc->tx_led);
ath_unregister_led(&sc->rx_led);
ath_unregister_led(&sc->radio_led);
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
}
static void ath_init_leds(struct ath_softc *sc)
@@ -1071,11 +1072,16 @@
char *trigger;
int ret;
+ if (AR_SREV_9287(sc->sc_ah))
+ sc->sc_ah->led_pin = ATH_LED_PIN_9287;
+ else
+ sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
+
/* Configure gpio 1 for output */
- ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+ ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
/* LED off, active low */
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
@@ -1114,6 +1120,7 @@
return;
fail:
+ cancel_delayed_work_sync(&sc->ath_led_blink_work);
ath_deinit_leds(sc);
}
@@ -1153,9 +1160,9 @@
ath9k_hw_set_interrupts(ah, sc->imask);
/* Enable LED */
- ath9k_hw_cfg_output(ah, ATH_LED_PIN,
+ ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0);
+ ath9k_hw_set_gpio(ah, ah->led_pin, 0);
ieee80211_wake_queues(sc->hw);
ath9k_ps_restore(sc);
@@ -1171,8 +1178,8 @@
ieee80211_stop_queues(sc->hw);
/* Disable LED */
- ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1);
- ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN);
+ ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+ ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
/* Disable interrupts */
ath9k_hw_set_interrupts(ah, 0);
@@ -1253,8 +1260,6 @@
DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
ath_deinit_leds(sc);
- cancel_work_sync(&sc->chan_work);
- cancel_delayed_work_sync(&sc->wiphy_work);
for (i = 0; i < sc->num_sec_wiphy; i++) {
struct ath_wiphy *aphy = sc->sec_wiphy[i];
@@ -1279,9 +1284,13 @@
if (ATH_TXQ_SETUP(sc, i))
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+ if ((sc->btcoex_info.no_stomp_timer) &&
+ sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
+ ath_gen_timer_free(sc->sc_ah, sc->btcoex_info.no_stomp_timer);
+
ath9k_hw_detach(sc->sc_ah);
+ sc->sc_ah = NULL;
ath9k_exit_debug(sc);
- ath9k_ps_restore(sc);
}
static int ath9k_reg_notifier(struct wiphy *wiphy,
@@ -1290,16 +1299,21 @@
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
- struct ath_regulatory *reg = &sc->sc_ah->regulatory;
+ struct ath_regulatory *reg = &sc->common.regulatory;
return ath_reg_notifier_apply(wiphy, request, reg);
}
-static int ath_init(u16 devid, struct ath_softc *sc)
+/*
+ * Initialize and fill ath_softc, ath_sofct is the
+ * "Software Carrier" struct. Historically it has existed
+ * to allow the separation between hardware specific
+ * variables (now in ath_hw) and driver specific variables.
+ */
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid)
{
struct ath_hw *ah = NULL;
- int status;
- int error = 0, i;
+ int r = 0, i;
int csz = 0;
/* XXX: hardware will not be ready until ath_open() being called */
@@ -1311,6 +1325,8 @@
spin_lock_init(&sc->wiphy_lock);
spin_lock_init(&sc->sc_resetlock);
spin_lock_init(&sc->sc_serial_rw);
+ spin_lock_init(&sc->ani_lock);
+ spin_lock_init(&sc->sc_pm_lock);
mutex_init(&sc->mutex);
tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
@@ -1322,16 +1338,26 @@
*/
ath_read_cachesize(sc, &csz);
/* XXX assert csz is non-zero */
- sc->cachelsz = csz << 2; /* convert to bytes */
+ sc->common.cachelsz = csz << 2; /* convert to bytes */
- ah = ath9k_hw_attach(devid, sc, &status);
- if (ah == NULL) {
+ ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
+ if (!ah) {
+ r = -ENOMEM;
+ goto bad_no_ah;
+ }
+
+ ah->ah_sc = sc;
+ ah->hw_version.devid = devid;
+ ah->hw_version.subsysid = subsysid;
+ sc->sc_ah = ah;
+
+ r = ath9k_hw_init(ah);
+ if (r) {
DPRINTF(sc, ATH_DBG_FATAL,
- "Unable to attach hardware; HAL status %d\n", status);
- error = -ENXIO;
+ "Unable to initialize hardware; "
+ "initialization status: %d\n", r);
goto bad;
}
- sc->sc_ah = ah;
/* Get the hardware key cache size. */
sc->keymax = ah->caps.keycache_size;
@@ -1349,9 +1375,6 @@
for (i = 0; i < sc->keymax; i++)
ath9k_hw_keyreset(ah, (u16) i);
- if (error)
- goto bad;
-
/* default to MONITOR mode */
sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
@@ -1371,14 +1394,14 @@
if (sc->beacon.beaconq == -1) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to setup a beacon xmit queue\n");
- error = -EIO;
+ r = -EIO;
goto bad2;
}
sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
if (sc->beacon.cabq == NULL) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to setup CAB xmit queue\n");
- error = -EIO;
+ r = -EIO;
goto bad2;
}
@@ -1393,26 +1416,26 @@
if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to setup xmit queue for BK traffic\n");
- error = -EIO;
+ r = -EIO;
goto bad2;
}
if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to setup xmit queue for BE traffic\n");
- error = -EIO;
+ r = -EIO;
goto bad2;
}
if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to setup xmit queue for VI traffic\n");
- error = -EIO;
+ r = -EIO;
goto bad2;
}
if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to setup xmit queue for VO traffic\n");
- error = -EIO;
+ r = -EIO;
goto bad2;
}
@@ -1496,8 +1519,11 @@
ARRAY_SIZE(ath9k_5ghz_chantable);
}
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)
- ath9k_hw_btcoex_enable(sc->sc_ah);
+ if (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE) {
+ r = ath9k_hw_btcoex_init(ah);
+ if (r)
+ goto bad2;
+ }
return 0;
bad2:
@@ -1506,11 +1532,12 @@
if (ATH_TXQ_SETUP(sc, i))
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
bad:
- if (ah)
- ath9k_hw_detach(ah);
+ ath9k_hw_detach(ah);
+ sc->sc_ah = NULL;
+bad_no_ah:
ath9k_exit_debug(sc);
- return error;
+ return r;
}
void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
@@ -1536,7 +1563,8 @@
hw->max_rates = 4;
hw->channel_change_time = 5000;
hw->max_listen_interval = 10;
- hw->max_rate_tries = ATH_11N_TXMAXTRY;
+ /* Hardware supports 10 but we use 4 */
+ hw->max_rate_tries = 4;
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vif);
@@ -1549,7 +1577,8 @@
&sc->sbands[IEEE80211_BAND_5GHZ];
}
-int ath_attach(u16 devid, struct ath_softc *sc)
+/* Device driver core initialization */
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid)
{
struct ieee80211_hw *hw = sc->hw;
int error = 0, i;
@@ -1557,7 +1586,7 @@
DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
- error = ath_init(devid, sc);
+ error = ath_init_softc(devid, sc, subsysid);
if (error != 0)
return error;
@@ -1567,12 +1596,12 @@
ath_set_hw_capab(sc, hw);
- error = ath_regd_init(&sc->sc_ah->regulatory, sc->hw->wiphy,
+ error = ath_regd_init(&sc->common.regulatory, sc->hw->wiphy,
ath9k_reg_notifier);
if (error)
return error;
- reg = &sc->sc_ah->regulatory;
+ reg = &sc->common.regulatory;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
@@ -1615,6 +1644,7 @@
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
ath9k_hw_detach(sc->sc_ah);
+ sc->sc_ah = NULL;
ath9k_exit_debug(sc);
return error;
@@ -1850,7 +1880,7 @@
if (chan->band == IEEE80211_BAND_2GHZ) {
ichan->chanmode = CHANNEL_G;
- ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
+ ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
} else {
ichan->chanmode = CHANNEL_A;
ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
@@ -1973,6 +2003,19 @@
ieee80211_wake_queues(hw);
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
+
+ if ((sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE) &&
+ !(sc->sc_flags & SC_OP_BTCOEX_ENABLED)) {
+ ath_btcoex_set_weight(&sc->btcoex_info, AR_BT_COEX_WGHT,
+ AR_STOMP_LOW_WLAN_WGHT);
+ ath9k_hw_btcoex_enable(sc->sc_ah);
+
+ ath_pcie_aspm_disable(sc);
+ if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
+ ath_btcoex_timer_resume(sc, &sc->btcoex_info);
+ }
+
mutex_unlock:
mutex_unlock(&sc->mutex);
@@ -1994,7 +2037,7 @@
goto exit;
}
- if (sc->hw->conf.flags & IEEE80211_CONF_PS) {
+ if (sc->ps_enabled) {
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
/*
* mac80211 does not set PM field for normal data frames, so we
@@ -2083,22 +2126,35 @@
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ mutex_lock(&sc->mutex);
+
aphy->state = ATH_WIPHY_INACTIVE;
+ cancel_delayed_work_sync(&sc->ath_led_blink_work);
+ cancel_delayed_work_sync(&sc->tx_complete_work);
+
+ if (!sc->num_sec_wiphy) {
+ cancel_delayed_work_sync(&sc->wiphy_work);
+ cancel_work_sync(&sc->chan_work);
+ }
+
if (sc->sc_flags & SC_OP_INVALID) {
DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
+ mutex_unlock(&sc->mutex);
return;
}
- mutex_lock(&sc->mutex);
-
- ieee80211_stop_queues(hw);
-
if (ath9k_wiphy_started(sc)) {
mutex_unlock(&sc->mutex);
return; /* another wiphy still in use */
}
+ if (sc->sc_flags & SC_OP_BTCOEX_ENABLED) {
+ ath9k_hw_btcoex_disable(sc->sc_ah);
+ if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
+ ath_btcoex_timer_pause(sc, &sc->btcoex_info);
+ }
+
/* make sure h/w will not generate any interrupt
* before setting the invalid flag. */
ath9k_hw_set_interrupts(sc->sc_ah, 0);
@@ -2115,6 +2171,7 @@
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah);
ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+ ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
@@ -2189,14 +2246,15 @@
if ((conf->type == NL80211_IFTYPE_STATION) ||
(conf->type == NL80211_IFTYPE_ADHOC) ||
(conf->type == NL80211_IFTYPE_MESH_POINT)) {
- if (ath9k_hw_phycounters(sc->sc_ah))
- sc->imask |= ATH9K_INT_MIB;
+ sc->imask |= ATH9K_INT_MIB;
sc->imask |= ATH9K_INT_TSFOOR;
}
ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
- if (conf->type == NL80211_IFTYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP ||
+ conf->type == NL80211_IFTYPE_ADHOC ||
+ conf->type == NL80211_IFTYPE_MONITOR)
ath_start_ani(sc);
out:
@@ -2249,9 +2307,28 @@
struct ath_softc *sc = aphy->sc;
struct ieee80211_conf *conf = &hw->conf;
struct ath_hw *ah = sc->sc_ah;
+ bool all_wiphys_idle = false, disable_radio = false;
mutex_lock(&sc->mutex);
+ /* Leave this as the first check */
+ if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+
+ spin_lock_bh(&sc->wiphy_lock);
+ all_wiphys_idle = ath9k_all_wiphys_idle(sc);
+ spin_unlock_bh(&sc->wiphy_lock);
+
+ if (conf->flags & IEEE80211_CONF_IDLE){
+ if (all_wiphys_idle)
+ disable_radio = true;
+ }
+ else if (all_wiphys_idle) {
+ ath_radio_enable(sc);
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "not-idle: enabling radio\n");
+ }
+ }
+
if (changed & IEEE80211_CONF_CHANGE_PS) {
if (conf->flags & IEEE80211_CONF_PS) {
if (!(ah->caps.hw_caps &
@@ -2263,8 +2340,9 @@
}
ath9k_hw_setrxabort(sc->sc_ah, 1);
}
- ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
+ sc->ps_enabled = true;
} else {
+ sc->ps_enabled = false;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
if (!(ah->caps.hw_caps &
ATH9K_HW_CAP_AUTOSLEEP)) {
@@ -2319,6 +2397,11 @@
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->config.txpowlimit = 2 * conf->power_level;
+ if (disable_radio) {
+ DPRINTF(sc, ATH_DBG_CONFIG, "idle: disabling radio\n");
+ ath_radio_disable(sc);
+ }
+
mutex_unlock(&sc->mutex);
return 0;
@@ -2328,6 +2411,7 @@
(FIF_PROMISC_IN_BSS | \
FIF_ALLMULTI | \
FIF_CONTROL | \
+ FIF_PSPOLL | \
FIF_OTHER_BSS | \
FIF_BCN_PRBRESP_PROMISC | \
FIF_FCSFAIL)
@@ -2336,8 +2420,7 @@
static void ath9k_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count,
- struct dev_mc_list *mclist)
+ u64 multicast)
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
@@ -2352,7 +2435,7 @@
ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
ath9k_ps_restore(sc);
- DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
+ DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", rfilt);
}
static void ath9k_sta_notify(struct ieee80211_hw *hw,
@@ -2638,19 +2721,11 @@
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
- ret = ath_tx_aggr_start(sc, sta, tid, ssn);
- if (ret < 0)
- DPRINTF(sc, ATH_DBG_FATAL,
- "Unable to start TX aggregation\n");
- else
- ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+ ath_tx_aggr_start(sc, sta, tid, ssn);
+ ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
break;
case IEEE80211_AMPDU_TX_STOP:
- ret = ath_tx_aggr_stop(sc, sta, tid);
- if (ret < 0)
- DPRINTF(sc, ATH_DBG_FATAL,
- "Unable to stop TX aggregation\n");
-
+ ath_tx_aggr_stop(sc, sta, tid);
ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
@@ -2668,6 +2743,7 @@
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ mutex_lock(&sc->mutex);
if (ath9k_wiphy_scanning(sc)) {
printk(KERN_DEBUG "ath9k: Two wiphys trying to scan at the "
"same time\n");
@@ -2675,14 +2751,16 @@
* Do not allow the concurrent scanning state for now. This
* could be improved with scanning control moved into ath9k.
*/
+ mutex_unlock(&sc->mutex);
return;
}
aphy->state = ATH_WIPHY_SCAN;
ath9k_wiphy_pause_all_forced(sc, aphy);
- mutex_lock(&sc->mutex);
+ spin_lock_bh(&sc->ani_lock);
sc->sc_flags |= SC_OP_SCANNING;
+ spin_unlock_bh(&sc->ani_lock);
mutex_unlock(&sc->mutex);
}
@@ -2692,9 +2770,12 @@
struct ath_softc *sc = aphy->sc;
mutex_lock(&sc->mutex);
+ spin_lock_bh(&sc->ani_lock);
aphy->state = ATH_WIPHY_ACTIVE;
sc->sc_flags &= ~SC_OP_SCANNING;
sc->sc_flags |= SC_OP_FULL_RESET;
+ spin_unlock_bh(&sc->ani_lock);
+ ath_beacon_config(sc, NULL);
mutex_unlock(&sc->mutex);
}
@@ -2728,7 +2809,8 @@
{ AR_SREV_VERSION_9100, "9100" },
{ AR_SREV_VERSION_9160, "9160" },
{ AR_SREV_VERSION_9280, "9280" },
- { AR_SREV_VERSION_9285, "9285" }
+ { AR_SREV_VERSION_9285, "9285" },
+ { AR_SREV_VERSION_9287, "9287" }
};
static struct {
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 170c5b3..903dd8a 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -25,6 +25,8 @@
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+ { PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI */
+ { PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
{ 0 }
};
@@ -33,8 +35,7 @@
{
u8 u8tmp;
- pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
- (u8 *)&u8tmp);
+ pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
*csz = (int)u8tmp;
/*
@@ -87,6 +88,7 @@
struct ath_softc *sc;
struct ieee80211_hw *hw;
u8 csz;
+ u16 subsysid;
u32 val;
int ret = 0;
struct ath_hw *ah;
@@ -158,8 +160,9 @@
hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
sizeof(struct ath_softc), &ath9k_ops);
- if (hw == NULL) {
- printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+ if (!hw) {
+ dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+ ret = -ENOMEM;
goto bad2;
}
@@ -176,17 +179,18 @@
sc->mem = mem;
sc->bus_ops = &ath_pci_bus_ops;
- if (ath_attach(id->device, sc) != 0) {
- ret = -ENODEV;
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
+ ret = ath_init_device(id->device, sc, subsysid);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize device\n");
goto bad3;
}
/* setup interrupt service routine */
- if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
- printk(KERN_ERR "%s: request_irq failed\n",
- wiphy_name(hw->wiphy));
- ret = -EIO;
+ ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
+ if (ret) {
+ dev_err(&pdev->dev, "request_irq failed\n");
goto bad4;
}
@@ -234,7 +238,7 @@
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
pci_save_state(pdev);
pci_disable_device(pdev);
@@ -251,10 +255,12 @@
u32 val;
int err;
+ pci_restore_state(pdev);
+
err = pci_enable_device(pdev);
if (err)
return err;
- pci_restore_state(pdev);
+
/*
* Suspend/Resume resets the PCI configuration space, so we have to
* re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -265,9 +271,9 @@
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
/* Enable LED */
- ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+ ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c
index aaa9415..63bf9a3 100644
--- a/drivers/net/wireless/ath/ath9k/phy.c
+++ b/drivers/net/wireless/ath/ath9k/phy.c
@@ -264,44 +264,23 @@
}
void
-ath9k_hw_rfdetach(struct ath_hw *ah)
+ath9k_hw_rf_free(struct ath_hw *ah)
{
- if (ah->analogBank0Data != NULL) {
- kfree(ah->analogBank0Data);
- ah->analogBank0Data = NULL;
- }
- if (ah->analogBank1Data != NULL) {
- kfree(ah->analogBank1Data);
- ah->analogBank1Data = NULL;
- }
- if (ah->analogBank2Data != NULL) {
- kfree(ah->analogBank2Data);
- ah->analogBank2Data = NULL;
- }
- if (ah->analogBank3Data != NULL) {
- kfree(ah->analogBank3Data);
- ah->analogBank3Data = NULL;
- }
- if (ah->analogBank6Data != NULL) {
- kfree(ah->analogBank6Data);
- ah->analogBank6Data = NULL;
- }
- if (ah->analogBank6TPCData != NULL) {
- kfree(ah->analogBank6TPCData);
- ah->analogBank6TPCData = NULL;
- }
- if (ah->analogBank7Data != NULL) {
- kfree(ah->analogBank7Data);
- ah->analogBank7Data = NULL;
- }
- if (ah->addac5416_21 != NULL) {
- kfree(ah->addac5416_21);
- ah->addac5416_21 = NULL;
- }
- if (ah->bank6Temp != NULL) {
- kfree(ah->bank6Temp);
- ah->bank6Temp = NULL;
- }
+#define ATH_FREE_BANK(bank) do { \
+ kfree(bank); \
+ bank = NULL; \
+ } while (0);
+
+ ATH_FREE_BANK(ah->analogBank0Data);
+ ATH_FREE_BANK(ah->analogBank1Data);
+ ATH_FREE_BANK(ah->analogBank2Data);
+ ATH_FREE_BANK(ah->analogBank3Data);
+ ATH_FREE_BANK(ah->analogBank6Data);
+ ATH_FREE_BANK(ah->analogBank6TPCData);
+ ATH_FREE_BANK(ah->analogBank7Data);
+ ATH_FREE_BANK(ah->addac5416_21);
+ ATH_FREE_BANK(ah->bank6Temp);
+#undef ATH_FREE_BANK
}
bool ath9k_hw_init_rf(struct ath_hw *ah, int *status)
@@ -374,18 +353,16 @@
u32 bank6SelMask;
u32 *bank6Temp = ah->bank6Temp;
- switch (ah->diversity_control) {
+ switch (ah->config.diversity_control) {
case ATH9K_ANT_FIXED_A:
bank6SelMask =
- (ah->
- antenna_switch_swap & ANTSWAP_AB) ? REDUCE_CHAIN_0 :
- REDUCE_CHAIN_1;
+ (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
+ REDUCE_CHAIN_0 : REDUCE_CHAIN_1;
break;
case ATH9K_ANT_FIXED_B:
bank6SelMask =
- (ah->
- antenna_switch_swap & ANTSWAP_AB) ? REDUCE_CHAIN_1 :
- REDUCE_CHAIN_0;
+ (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
+ REDUCE_CHAIN_1 : REDUCE_CHAIN_0;
break;
case ATH9K_ANT_VARIABLE:
return;
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index c70f530..dfda6f4 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -185,6 +185,9 @@
#define AR_PHY_PLL_CTL_44_2133 0xeb
#define AR_PHY_PLL_CTL_40_2133 0xea
+#define AR_PHY_SPECTRAL_SCAN 0x9912
+#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1
+
#define AR_PHY_RX_DELAY 0x9914
#define AR_PHY_SEARCH_START_DELAY 0x9918
#define AR_PHY_RX_DELAY_DELAY 0x00003FFF
@@ -309,7 +312,25 @@
#define AR_PHY_NEW_ADC_DC_GAIN_CORR(_i) (0x99b4 + ((_i) << 12))
#define AR_PHY_NEW_ADC_GAIN_CORR_ENABLE 0x40000000
#define AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE 0x80000000
-#define AR_PHY_MULTICHAIN_GAIN_CTL 0x99ac
+
+#define AR_PHY_MULTICHAIN_GAIN_CTL 0x99ac
+#define AR_PHY_9285_ANT_DIV_CTL_ALL 0x7f000000
+#define AR_PHY_9285_ANT_DIV_CTL 0x01000000
+#define AR_PHY_9285_ANT_DIV_CTL_S 24
+#define AR_PHY_9285_ANT_DIV_ALT_LNACONF 0x06000000
+#define AR_PHY_9285_ANT_DIV_ALT_LNACONF_S 25
+#define AR_PHY_9285_ANT_DIV_MAIN_LNACONF 0x18000000
+#define AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S 27
+#define AR_PHY_9285_ANT_DIV_ALT_GAINTB 0x20000000
+#define AR_PHY_9285_ANT_DIV_ALT_GAINTB_S 29
+#define AR_PHY_9285_ANT_DIV_MAIN_GAINTB 0x40000000
+#define AR_PHY_9285_ANT_DIV_MAIN_GAINTB_S 30
+#define AR_PHY_9285_ANT_DIV_LNA1 2
+#define AR_PHY_9285_ANT_DIV_LNA2 1
+#define AR_PHY_9285_ANT_DIV_LNA1_PLUS_LNA2 3
+#define AR_PHY_9285_ANT_DIV_LNA1_MINUS_LNA2 0
+#define AR_PHY_9285_ANT_DIV_GAINTB_0 0
+#define AR_PHY_9285_ANT_DIV_GAINTB_1 1
#define AR_PHY_EXT_CCA0 0x99b8
#define AR_PHY_EXT_CCA0_THRESH62 0x000000FF
@@ -375,6 +396,7 @@
#define AR_PHY_CHAN_INFO_GAIN 0x9CFC
#define AR_PHY_MODE 0xA200
+#define AR_PHY_MODE_ASYNCFIFO 0x80
#define AR_PHY_MODE_AR2133 0x08
#define AR_PHY_MODE_AR5111 0x00
#define AR_PHY_MODE_AR5112 0x08
@@ -397,6 +419,7 @@
#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME 0x00001FC0
#define AR_PHY_CCK_DETECT_ANT_SWITCH_TIME_S 6
#define AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV 0x2000
+#define AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV_S 13
#define AR_PHY_GAIN_2GHZ 0xA20C
#define AR_PHY_GAIN_2GHZ_RXTX_MARGIN 0x00FC0000
@@ -467,11 +490,18 @@
#define AR_PHY_TX_PWRCTRL9 0xa27C
#define AR_PHY_TX_DESIRED_SCALE_CCK 0x00007C00
#define AR_PHY_TX_DESIRED_SCALE_CCK_S 10
+#define AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL 0x80000000
+#define AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL_S 31
#define AR_PHY_TX_GAIN_TBL1 0xa300
#define AR_PHY_TX_GAIN 0x0007F000
#define AR_PHY_TX_GAIN_S 12
+#define AR_PHY_CH0_TX_PWRCTRL11 0xa398
+#define AR_PHY_CH1_TX_PWRCTRL11 0xb398
+#define AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP 0x0000FC00
+#define AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP_S 10
+
#define AR_PHY_VIT_MASK2_M_46_61 0xa3a0
#define AR_PHY_MASK2_M_31_45 0xa3a4
#define AR_PHY_MASK2_M_16_30 0xa3a8
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index ba06e78..16a2717 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -22,133 +22,132 @@
{
{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
5400, 0x0b, 0x00, 12,
- 0, 2, 1, 0, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
7800, 0x0f, 0x00, 18,
- 0, 3, 1, 1, 1, 1, 1, 0 },
+ 0, 1, 1, 1, 1, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
10000, 0x0a, 0x00, 24,
- 2, 4, 2, 2, 2, 2, 2, 0 },
+ 2, 2, 2, 2, 2, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
13900, 0x0e, 0x00, 36,
- 2, 6, 2, 3, 3, 3, 3, 0 },
+ 2, 3, 3, 3, 3, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
17300, 0x09, 0x00, 48,
- 4, 10, 3, 4, 4, 4, 4, 0 },
+ 4, 4, 4, 4, 4, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
23000, 0x0d, 0x00, 72,
- 4, 14, 3, 5, 5, 5, 5, 0 },
+ 4, 5, 5, 5, 5, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
27400, 0x08, 0x00, 96,
- 4, 20, 3, 6, 6, 6, 6, 0 },
+ 4, 6, 6, 6, 6, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
29300, 0x0c, 0x00, 108,
- 4, 23, 3, 7, 7, 7, 7, 0 },
- { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
+ 4, 7, 7, 7, 7, 0 },
+ { VALID_2040, VALID_2040, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
6400, 0x80, 0x00, 0,
- 0, 2, 3, 8, 24, 8, 24, 3216 },
+ 0, 8, 24, 8, 24, 3216 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */
12700, 0x81, 0x00, 1,
- 2, 4, 3, 9, 25, 9, 25, 6434 },
+ 2, 9, 25, 9, 25, 6434 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */
18800, 0x82, 0x00, 2,
- 2, 6, 3, 10, 26, 10, 26, 9650 },
+ 2, 10, 26, 10, 26, 9650 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */
25000, 0x83, 0x00, 3,
- 4, 10, 3, 11, 27, 11, 27, 12868 },
+ 4, 11, 27, 11, 27, 12868 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */
36700, 0x84, 0x00, 4,
- 4, 14, 3, 12, 28, 12, 28, 19304 },
+ 4, 12, 28, 12, 28, 19304 },
{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */
48100, 0x85, 0x00, 5,
- 4, 20, 3, 13, 29, 13, 29, 25740 },
+ 4, 13, 29, 13, 29, 25740 },
{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */
53500, 0x86, 0x00, 6,
- 4, 23, 3, 14, 30, 14, 30, 28956 },
+ 4, 14, 30, 14, 30, 28956 },
{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */
59000, 0x87, 0x00, 7,
- 4, 25, 3, 15, 31, 15, 32, 32180 },
+ 4, 15, 31, 15, 32, 32180 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */
12700, 0x88, 0x00,
- 8, 0, 2, 3, 16, 33, 16, 33, 6430 },
+ 8, 3, 16, 33, 16, 33, 6430 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */
24800, 0x89, 0x00, 9,
- 2, 4, 3, 17, 34, 17, 34, 12860 },
+ 2, 17, 34, 17, 34, 12860 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */
36600, 0x8a, 0x00, 10,
- 2, 6, 3, 18, 35, 18, 35, 19300 },
+ 2, 18, 35, 18, 35, 19300 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */
48100, 0x8b, 0x00, 11,
- 4, 10, 3, 19, 36, 19, 36, 25736 },
+ 4, 19, 36, 19, 36, 25736 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */
69500, 0x8c, 0x00, 12,
- 4, 14, 3, 20, 37, 20, 37, 38600 },
+ 4, 20, 37, 20, 37, 38600 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */
89500, 0x8d, 0x00, 13,
- 4, 20, 3, 21, 38, 21, 38, 51472 },
+ 4, 21, 38, 21, 38, 51472 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */
98900, 0x8e, 0x00, 14,
- 4, 23, 3, 22, 39, 22, 39, 57890 },
+ 4, 22, 39, 22, 39, 57890 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */
108300, 0x8f, 0x00, 15,
- 4, 25, 3, 23, 40, 23, 41, 64320 },
+ 4, 23, 40, 23, 41, 64320 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */
13200, 0x80, 0x00, 0,
- 0, 2, 3, 8, 24, 24, 24, 6684 },
+ 0, 8, 24, 24, 24, 6684 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */
25900, 0x81, 0x00, 1,
- 2, 4, 3, 9, 25, 25, 25, 13368 },
+ 2, 9, 25, 25, 25, 13368 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */
38600, 0x82, 0x00, 2,
- 2, 6, 3, 10, 26, 26, 26, 20052 },
+ 2, 10, 26, 26, 26, 20052 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */
49800, 0x83, 0x00, 3,
- 4, 10, 3, 11, 27, 27, 27, 26738 },
+ 4, 11, 27, 27, 27, 26738 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */
72200, 0x84, 0x00, 4,
- 4, 14, 3, 12, 28, 28, 28, 40104 },
+ 4, 12, 28, 28, 28, 40104 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */
92900, 0x85, 0x00, 5,
- 4, 20, 3, 13, 29, 29, 29, 53476 },
+ 4, 13, 29, 29, 29, 53476 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */
102700, 0x86, 0x00, 6,
- 4, 23, 3, 14, 30, 30, 30, 60156 },
+ 4, 14, 30, 30, 30, 60156 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */
112000, 0x87, 0x00, 7,
- 4, 25, 3, 15, 31, 32, 32, 66840 },
+ 4, 15, 31, 32, 32, 66840 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
122000, 0x87, 0x00, 7,
- 4, 25, 3, 15, 31, 32, 32, 74200 },
+ 4, 15, 31, 32, 32, 74200 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */
25800, 0x88, 0x00, 8,
- 0, 2, 3, 16, 33, 33, 33, 13360 },
+ 0, 16, 33, 33, 33, 13360 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */
49800, 0x89, 0x00, 9,
- 2, 4, 3, 17, 34, 34, 34, 26720 },
+ 2, 17, 34, 34, 34, 26720 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */
71900, 0x8a, 0x00, 10,
- 2, 6, 3, 18, 35, 35, 35, 40080 },
+ 2, 18, 35, 35, 35, 40080 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */
92500, 0x8b, 0x00, 11,
- 4, 10, 3, 19, 36, 36, 36, 53440 },
+ 4, 19, 36, 36, 36, 53440 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */
130300, 0x8c, 0x00, 12,
- 4, 14, 3, 20, 37, 37, 37, 80160 },
+ 4, 20, 37, 37, 37, 80160 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */
162800, 0x8d, 0x00, 13,
- 4, 20, 3, 21, 38, 38, 38, 106880 },
+ 4, 21, 38, 38, 38, 106880 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */
178200, 0x8e, 0x00, 14,
- 4, 23, 3, 22, 39, 39, 39, 120240 },
+ 4, 22, 39, 39, 39, 120240 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */
192100, 0x8f, 0x00, 15,
- 4, 25, 3, 23, 40, 41, 41, 133600 },
+ 4, 23, 40, 41, 41, 133600 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
207000, 0x8f, 0x00, 15,
- 4, 25, 3, 23, 40, 41, 41, 148400 },
+ 4, 23, 40, 41, 41, 148400 },
},
50, /* probe interval */
- 50, /* rssi reduce interval */
WLAN_RC_HT_FLAG, /* Phy rates allowed initially */
};
@@ -160,145 +159,144 @@
{
{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
900, 0x1b, 0x00, 2,
- 0, 0, 1, 0, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0 },
{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
1900, 0x1a, 0x04, 4,
- 1, 1, 1, 1, 1, 1, 1, 0 },
+ 1, 1, 1, 1, 1, 0 },
{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
4900, 0x19, 0x04, 11,
- 2, 2, 2, 2, 2, 2, 2, 0 },
+ 2, 2, 2, 2, 2, 0 },
{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
8100, 0x18, 0x04, 22,
- 3, 3, 2, 3, 3, 3, 3, 0 },
+ 3, 3, 3, 3, 3, 0 },
{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
5400, 0x0b, 0x00, 12,
- 4, 2, 1, 4, 4, 4, 4, 0 },
+ 4, 4, 4, 4, 4, 0 },
{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
7800, 0x0f, 0x00, 18,
- 4, 3, 1, 5, 5, 5, 5, 0 },
+ 4, 5, 5, 5, 5, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
10100, 0x0a, 0x00, 24,
- 6, 4, 1, 6, 6, 6, 6, 0 },
+ 6, 6, 6, 6, 6, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
14100, 0x0e, 0x00, 36,
- 6, 6, 2, 7, 7, 7, 7, 0 },
+ 6, 7, 7, 7, 7, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
17700, 0x09, 0x00, 48,
- 8, 10, 3, 8, 8, 8, 8, 0 },
+ 8, 8, 8, 8, 8, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
23700, 0x0d, 0x00, 72,
- 8, 14, 3, 9, 9, 9, 9, 0 },
+ 8, 9, 9, 9, 9, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
27400, 0x08, 0x00, 96,
- 8, 20, 3, 10, 10, 10, 10, 0 },
+ 8, 10, 10, 10, 10, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
30900, 0x0c, 0x00, 108,
- 8, 23, 3, 11, 11, 11, 11, 0 },
+ 8, 11, 11, 11, 11, 0 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
6400, 0x80, 0x00, 0,
- 4, 2, 3, 12, 28, 12, 28, 3216 },
+ 4, 12, 28, 12, 28, 3216 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */
12700, 0x81, 0x00, 1,
- 6, 4, 3, 13, 29, 13, 29, 6434 },
+ 6, 13, 29, 13, 29, 6434 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */
18800, 0x82, 0x00, 2,
- 6, 6, 3, 14, 30, 14, 30, 9650 },
+ 6, 14, 30, 14, 30, 9650 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */
25000, 0x83, 0x00, 3,
- 8, 10, 3, 15, 31, 15, 31, 12868 },
+ 8, 15, 31, 15, 31, 12868 },
{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */
36700, 0x84, 0x00, 4,
- 8, 14, 3, 16, 32, 16, 32, 19304 },
+ 8, 16, 32, 16, 32, 19304 },
{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */
48100, 0x85, 0x00, 5,
- 8, 20, 3, 17, 33, 17, 33, 25740 },
+ 8, 17, 33, 17, 33, 25740 },
{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */
53500, 0x86, 0x00, 6,
- 8, 23, 3, 18, 34, 18, 34, 28956 },
+ 8, 18, 34, 18, 34, 28956 },
{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */
59000, 0x87, 0x00, 7,
- 8, 25, 3, 19, 35, 19, 36, 32180 },
+ 8, 19, 35, 19, 36, 32180 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */
12700, 0x88, 0x00, 8,
- 4, 2, 3, 20, 37, 20, 37, 6430 },
+ 4, 20, 37, 20, 37, 6430 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */
24800, 0x89, 0x00, 9,
- 6, 4, 3, 21, 38, 21, 38, 12860 },
+ 6, 21, 38, 21, 38, 12860 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */
36600, 0x8a, 0x00, 10,
- 6, 6, 3, 22, 39, 22, 39, 19300 },
+ 6, 22, 39, 22, 39, 19300 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */
48100, 0x8b, 0x00, 11,
- 8, 10, 3, 23, 40, 23, 40, 25736 },
+ 8, 23, 40, 23, 40, 25736 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */
69500, 0x8c, 0x00, 12,
- 8, 14, 3, 24, 41, 24, 41, 38600 },
+ 8, 24, 41, 24, 41, 38600 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */
89500, 0x8d, 0x00, 13,
- 8, 20, 3, 25, 42, 25, 42, 51472 },
+ 8, 25, 42, 25, 42, 51472 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */
98900, 0x8e, 0x00, 14,
- 8, 23, 3, 26, 43, 26, 44, 57890 },
+ 8, 26, 43, 26, 44, 57890 },
{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */
108300, 0x8f, 0x00, 15,
- 8, 25, 3, 27, 44, 27, 45, 64320 },
+ 8, 27, 44, 27, 45, 64320 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */
13200, 0x80, 0x00, 0,
- 8, 2, 3, 12, 28, 28, 28, 6684 },
+ 8, 12, 28, 28, 28, 6684 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */
25900, 0x81, 0x00, 1,
- 8, 4, 3, 13, 29, 29, 29, 13368 },
+ 8, 13, 29, 29, 29, 13368 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */
38600, 0x82, 0x00, 2,
- 8, 6, 3, 14, 30, 30, 30, 20052 },
+ 8, 14, 30, 30, 30, 20052 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */
49800, 0x83, 0x00, 3,
- 8, 10, 3, 15, 31, 31, 31, 26738 },
+ 8, 15, 31, 31, 31, 26738 },
{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */
72200, 0x84, 0x00, 4,
- 8, 14, 3, 16, 32, 32, 32, 40104 },
+ 8, 16, 32, 32, 32, 40104 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */
92900, 0x85, 0x00, 5,
- 8, 20, 3, 17, 33, 33, 33, 53476 },
+ 8, 17, 33, 33, 33, 53476 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */
102700, 0x86, 0x00, 6,
- 8, 23, 3, 18, 34, 34, 34, 60156 },
+ 8, 18, 34, 34, 34, 60156 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */
112000, 0x87, 0x00, 7,
- 8, 23, 3, 19, 35, 36, 36, 66840 },
+ 8, 19, 35, 36, 36, 66840 },
{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
122000, 0x87, 0x00, 7,
- 8, 25, 3, 19, 35, 36, 36, 74200 },
+ 8, 19, 35, 36, 36, 74200 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */
25800, 0x88, 0x00, 8,
- 8, 2, 3, 20, 37, 37, 37, 13360 },
+ 8, 20, 37, 37, 37, 13360 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */
49800, 0x89, 0x00, 9,
- 8, 4, 3, 21, 38, 38, 38, 26720 },
+ 8, 21, 38, 38, 38, 26720 },
{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */
71900, 0x8a, 0x00, 10,
- 8, 6, 3, 22, 39, 39, 39, 40080 },
+ 8, 22, 39, 39, 39, 40080 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */
92500, 0x8b, 0x00, 11,
- 8, 10, 3, 23, 40, 40, 40, 53440 },
+ 8, 23, 40, 40, 40, 53440 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */
130300, 0x8c, 0x00, 12,
- 8, 14, 3, 24, 41, 41, 41, 80160 },
+ 8, 24, 41, 41, 41, 80160 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */
162800, 0x8d, 0x00, 13,
- 8, 20, 3, 25, 42, 42, 42, 106880 },
+ 8, 25, 42, 42, 42, 106880 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */
178200, 0x8e, 0x00, 14,
- 8, 23, 3, 26, 43, 43, 43, 120240 },
+ 8, 26, 43, 43, 43, 120240 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */
192100, 0x8f, 0x00, 15,
- 8, 23, 3, 27, 44, 45, 45, 133600 },
+ 8, 27, 44, 45, 45, 133600 },
{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
207000, 0x8f, 0x00, 15,
- 8, 25, 3, 27, 44, 45, 45, 148400 },
+ 8, 27, 44, 45, 45, 148400 },
},
50, /* probe interval */
- 50, /* rssi reduce interval */
WLAN_RC_HT_FLAG, /* Phy rates allowed initially */
};
@@ -307,31 +305,30 @@
{
{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
5400, 0x0b, 0x00, (0x80|12),
- 0, 2, 1, 0, 0 },
+ 0, 0, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
7800, 0x0f, 0x00, 18,
- 0, 3, 1, 1, 0 },
+ 0, 1, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
10000, 0x0a, 0x00, (0x80|24),
- 2, 4, 2, 2, 0 },
+ 2, 2, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
13900, 0x0e, 0x00, 36,
- 2, 6, 2, 3, 0 },
+ 2, 3, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
17300, 0x09, 0x00, (0x80|48),
- 4, 10, 3, 4, 0 },
+ 4, 4, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
23000, 0x0d, 0x00, 72,
- 4, 14, 3, 5, 0 },
+ 4, 5, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
27400, 0x08, 0x00, 96,
- 4, 19, 3, 6, 0 },
+ 4, 6, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
29300, 0x0c, 0x00, 108,
- 4, 23, 3, 7, 0 },
+ 4, 7, 0 },
},
50, /* probe interval */
- 50, /* rssi reduce interval */
0, /* Phy rates allowed initially */
};
@@ -340,64 +337,42 @@
{
{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
900, 0x1b, 0x00, 2,
- 0, 0, 1, 0, 0 },
+ 0, 0, 0 },
{ VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
1900, 0x1a, 0x04, 4,
- 1, 1, 1, 1, 0 },
+ 1, 1, 0 },
{ VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
4900, 0x19, 0x04, 11,
- 2, 2, 2, 2, 0 },
+ 2, 2, 0 },
{ VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
8100, 0x18, 0x04, 22,
- 3, 3, 2, 3, 0 },
+ 3, 3, 0 },
{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
5400, 0x0b, 0x00, 12,
- 4, 2, 1, 4, 0 },
+ 4, 4, 0 },
{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
7800, 0x0f, 0x00, 18,
- 4, 3, 1, 5, 0 },
+ 4, 5, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
10000, 0x0a, 0x00, 24,
- 6, 4, 1, 6, 0 },
+ 6, 6, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
13900, 0x0e, 0x00, 36,
- 6, 6, 2, 7, 0 },
+ 6, 7, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
17300, 0x09, 0x00, 48,
- 8, 10, 3, 8, 0 },
+ 8, 8, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
23000, 0x0d, 0x00, 72,
- 8, 14, 3, 9, 0 },
+ 8, 9, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
27400, 0x08, 0x00, 96,
- 8, 19, 3, 10, 0 },
+ 8, 10, 0 },
{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
29300, 0x0c, 0x00, 108,
- 8, 23, 3, 11, 0 },
+ 8, 11, 0 },
},
50, /* probe interval */
- 50, /* rssi reduce interval */
- 0, /* Phy rates allowed initially */
-};
-
-static const struct ath_rate_table ar5416_11b_ratetable = {
- 4,
- {
- { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
- 900, 0x1b, 0x00, (0x80|2),
- 0, 0, 1, 0, 0 },
- { VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
- 1800, 0x1a, 0x04, (0x80|4),
- 1, 1, 1, 1, 0 },
- { VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
- 4300, 0x19, 0x04, (0x80|11),
- 1, 2, 2, 2, 0 },
- { VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
- 7100, 0x18, 0x04, (0x80|22),
- 1, 4, 100, 3, 0 },
- },
- 100, /* probe interval */
- 100, /* rssi reduce interval */
0, /* Phy rates allowed initially */
};
@@ -454,13 +429,6 @@
ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? 1 : 0;
}
-static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv,
- u8 index)
-{
- ASSERT(index <= ath_rc_priv->rate_table_size);
- return ath_rc_priv->valid_rate_index[index];
-}
-
static inline
int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
struct ath_rate_priv *ath_rc_priv,
@@ -495,15 +463,13 @@
if (!ignore_cw && WLAN_RC_PHY_HT(phy))
if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG))
return 0;
- if (!WLAN_RC_PHY_40(phy) && (capflag & WLAN_RC_40_FLAG))
- return 0;
return 1;
}
static inline int
-ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table,
- struct ath_rate_priv *ath_rc_priv,
- u8 cur_valid_txrate, u8 *next_idx)
+ath_rc_get_lower_rix(const struct ath_rate_table *rate_table,
+ struct ath_rate_priv *ath_rc_priv,
+ u8 cur_valid_txrate, u8 *next_idx)
{
int8_t i;
@@ -629,52 +595,20 @@
return hi;
}
-static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
- struct ath_rate_priv *ath_rc_priv,
- const struct ath_rate_table *rate_table,
- int *is_probing)
+/* Finds the highest rate index we can use */
+static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
+ struct ath_rate_priv *ath_rc_priv,
+ const struct ath_rate_table *rate_table,
+ int *is_probing)
{
- u32 dt, best_thruput, this_thruput, now_msec;
+ u32 best_thruput, this_thruput, now_msec;
u8 rate, next_rate, best_rate, maxindex, minindex;
- int8_t rssi_last, rssi_reduce = 0, index = 0;
-
- *is_probing = 0;
-
- rssi_last = median(ath_rc_priv->rssi_last,
- ath_rc_priv->rssi_last_prev,
- ath_rc_priv->rssi_last_prev2);
-
- /*
- * Age (reduce) last ack rssi based on how old it is.
- * The bizarre numbers are so the delta is 160msec,
- * meaning we divide by 16.
- * 0msec <= dt <= 25msec: don't derate
- * 25msec <= dt <= 185msec: derate linearly from 0 to 10dB
- * 185msec <= dt: derate by 10dB
- */
+ int8_t index = 0;
now_msec = jiffies_to_msecs(jiffies);
- dt = now_msec - ath_rc_priv->rssi_time;
-
- if (dt >= 185)
- rssi_reduce = 10;
- else if (dt >= 25)
- rssi_reduce = (u8)((dt - 25) >> 4);
-
- /* Now reduce rssi_last by rssi_reduce */
- if (rssi_last < rssi_reduce)
- rssi_last = 0;
- else
- rssi_last -= rssi_reduce;
-
- /*
- * Now look up the rate in the rssi table and return it.
- * If no rates match then we return 0 (lowest rate)
- */
-
+ *is_probing = 0;
best_thruput = 0;
maxindex = ath_rc_priv->max_valid_rate-1;
-
minindex = 0;
best_rate = minindex;
@@ -700,7 +634,7 @@
* 10-15 and we would be worse off then staying
* at the current rate.
*/
- per_thres = ath_rc_priv->state[rate].per;
+ per_thres = ath_rc_priv->per[rate];
if (per_thres < 12)
per_thres = 12;
@@ -714,7 +648,6 @@
}
rate = best_rate;
- ath_rc_priv->rssi_last_lookup = rssi_last;
/*
* Must check the actual rate (ratekbps) to account for
@@ -741,10 +674,18 @@
if (rate > (ath_rc_priv->rate_table_size - 1))
rate = ath_rc_priv->rate_table_size - 1;
- ASSERT((rate_table->info[rate].valid &&
- (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) ||
- (rate_table->info[rate].valid_single_stream &&
- !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)));
+ if (rate_table->info[rate].valid &&
+ (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
+ return rate;
+
+ if (rate_table->info[rate].valid_single_stream &&
+ !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
+ return rate;
+
+ /* This should not happen */
+ WARN_ON(1);
+
+ rate = ath_rc_priv->valid_rate_index[0];
return rate;
}
@@ -796,7 +737,6 @@
* just CTS. Note that this is only done for OFDM/HT unicast frames.
*/
if ((sc->sc_flags & SC_OP_PROTECT_ENABLE) &&
- !(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) &&
(rate_table->info[rix].phy == WLAN_RC_PHY_OFDM ||
WLAN_RC_PHY_HT(rate_table->info[rix].phy))) {
rates[0].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT;
@@ -806,50 +746,37 @@
tx_info->control.rts_cts_rate_idx = cix;
}
-static u8 ath_rc_rate_getidx(struct ath_softc *sc,
- struct ath_rate_priv *ath_rc_priv,
- const struct ath_rate_table *rate_table,
- u8 rix, u16 stepdown,
- u16 min_rate)
+static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
{
- u32 j;
- u8 nextindex = 0;
-
- if (min_rate) {
- for (j = RATE_TABLE_SIZE; j > 0; j--) {
- if (ath_rc_get_nextlowervalid_txrate(rate_table,
- ath_rc_priv, rix, &nextindex))
- rix = nextindex;
- else
- break;
- }
- } else {
- for (j = stepdown; j > 0; j--) {
- if (ath_rc_get_nextlowervalid_txrate(rate_table,
- ath_rc_priv, rix, &nextindex))
- rix = nextindex;
- else
- break;
- }
- }
- return rix;
-}
-
-static void ath_rc_ratefind(struct ath_softc *sc,
- struct ath_rate_priv *ath_rc_priv,
- struct ieee80211_tx_rate_control *txrc)
-{
+ struct ath_softc *sc = priv;
+ struct ath_rate_priv *ath_rc_priv = priv_sta;
const struct ath_rate_table *rate_table;
struct sk_buff *skb = txrc->skb;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_tx_rate *rates = tx_info->control.rates;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
__le16 fc = hdr->frame_control;
- u8 try_per_rate = 0, i = 0, rix, nrix;
+ u8 try_per_rate, i = 0, rix, nrix;
int is_probe = 0;
+ if (rate_control_send_low(sta, priv_sta, txrc))
+ return;
+
+ /*
+ * For Multi Rate Retry we use a different number of
+ * retry attempt counts. This ends up looking like this:
+ *
+ * MRR[0] = 2
+ * MRR[1] = 2
+ * MRR[2] = 2
+ * MRR[3] = 4
+ *
+ */
+ try_per_rate = sc->hw->max_rate_tries;
+
rate_table = sc->cur_rate_table;
- rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, &is_probe);
+ rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe);
nrix = rix;
if (is_probe) {
@@ -858,18 +785,15 @@
ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
1, nrix, 0);
- try_per_rate = (ATH_11N_TXMAXTRY/4);
/* Get the next tried/allowed rate. No RTS for the next series
* after the probe rate
*/
- nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
- rate_table, nrix, 1, 0);
+ ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
try_per_rate, nrix, 0);
tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
} else {
- try_per_rate = (ATH_11N_TXMAXTRY/4);
/* Set the choosen rate. No RTS for first series entry. */
ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
try_per_rate, nrix, 0);
@@ -877,18 +801,14 @@
/* Fill in the other rates for multirate retry */
for ( ; i < 4; i++) {
- u8 try_num;
- u8 min_rate;
+ /* Use twice the number of tries for the last MRR segment. */
+ if (i + 1 == 4)
+ try_per_rate = 4;
- try_num = ((i + 1) == 4) ?
- ATH_11N_TXMAXTRY - (try_per_rate * i) : try_per_rate ;
- min_rate = (((i + 1) == 4) && 0);
-
- nrix = ath_rc_rate_getidx(sc, ath_rc_priv,
- rate_table, nrix, 1, min_rate);
+ ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
/* All other rates in the series have RTS enabled */
ath_rc_rate_set_series(rate_table, &rates[i], txrc,
- try_num, nrix, 1);
+ try_per_rate, nrix, 1);
}
/*
@@ -925,9 +845,8 @@
*
* FIXME: Fix duration
*/
- if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (ieee80211_has_morefrags(fc) ||
- (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG))) {
+ if (ieee80211_has_morefrags(fc) ||
+ (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
rates[1].count = rates[2].count = rates[3].count = 0;
rates[1].idx = rates[2].idx = rates[3].idx = 0;
rates[0].count = ATH_TXMAXTRY;
@@ -960,13 +879,13 @@
100 * 9 / 10
};
- last_per = ath_rc_priv->state[tx_rate].per;
+ last_per = ath_rc_priv->per[tx_rate];
if (xretries) {
if (xretries == 1) {
- ath_rc_priv->state[tx_rate].per += 30;
- if (ath_rc_priv->state[tx_rate].per > 100)
- ath_rc_priv->state[tx_rate].per = 100;
+ ath_rc_priv->per[tx_rate] += 30;
+ if (ath_rc_priv->per[tx_rate] > 100)
+ ath_rc_priv->per[tx_rate] = 100;
} else {
/* xretries == 2 */
count = ARRAY_SIZE(nretry_to_per_lookup);
@@ -974,7 +893,7 @@
retries = count - 1;
/* new_PER = 7/8*old_PER + 1/8*(currentPER) */
- ath_rc_priv->state[tx_rate].per =
+ ath_rc_priv->per[tx_rate] =
(u8)(last_per - (last_per >> 3) + (100 >> 3));
}
@@ -1010,18 +929,14 @@
n_frames = tx_info_priv->n_frames * (retries + 1);
cur_per = (100 * n_bad_frames / n_frames) >> 3;
new_per = (u8)(last_per - (last_per >> 3) + cur_per);
- ath_rc_priv->state[tx_rate].per = new_per;
+ ath_rc_priv->per[tx_rate] = new_per;
}
} else {
- ath_rc_priv->state[tx_rate].per =
+ ath_rc_priv->per[tx_rate] =
(u8)(last_per - (last_per >> 3) +
(nretry_to_per_lookup[retries] >> 3));
}
- ath_rc_priv->rssi_last_prev2 = ath_rc_priv->rssi_last_prev;
- ath_rc_priv->rssi_last_prev = ath_rc_priv->rssi_last;
- ath_rc_priv->rssi_last = tx_info_priv->tx.ts_rssi;
- ath_rc_priv->rssi_time = now_msec;
/*
* If we got at most one retry then increase the max rate if
@@ -1045,8 +960,8 @@
ath_rc_priv->probe_rate;
probe_rate = ath_rc_priv->probe_rate;
- if (ath_rc_priv->state[probe_rate].per > 30)
- ath_rc_priv->state[probe_rate].per = 20;
+ if (ath_rc_priv->per[probe_rate] > 30)
+ ath_rc_priv->per[probe_rate] = 20;
ath_rc_priv->probe_rate = 0;
@@ -1065,18 +980,9 @@
/*
* Don't update anything. We don't know if
* this was because of collisions or poor signal.
- *
- * Later: if rssi_ack is close to
- * ath_rc_priv->state[txRate].rssi_thres and we see lots
- * of retries, then we could increase
- * ath_rc_priv->state[txRate].rssi_thres.
*/
ath_rc_priv->hw_maxretry_pktcnt = 0;
} else {
- int32_t rssi_ackAvg;
- int8_t rssi_thres;
- int8_t rssi_ack_vmin;
-
/*
* It worked with no retries. First ignore bogus (small)
* rssi_ack values.
@@ -1086,43 +992,9 @@
ath_rc_priv->hw_maxretry_pktcnt++;
}
- if (tx_info_priv->tx.ts_rssi <
- rate_table->info[tx_rate].rssi_ack_validmin)
- goto exit;
-
- /* Average the rssi */
- if (tx_rate != ath_rc_priv->rssi_sum_rate) {
- ath_rc_priv->rssi_sum_rate = tx_rate;
- ath_rc_priv->rssi_sum =
- ath_rc_priv->rssi_sum_cnt = 0;
- }
-
- ath_rc_priv->rssi_sum += tx_info_priv->tx.ts_rssi;
- ath_rc_priv->rssi_sum_cnt++;
-
- if (ath_rc_priv->rssi_sum_cnt < 4)
- goto exit;
-
- rssi_ackAvg =
- (ath_rc_priv->rssi_sum + 2) / 4;
- rssi_thres =
- ath_rc_priv->state[tx_rate].rssi_thres;
- rssi_ack_vmin =
- rate_table->info[tx_rate].rssi_ack_validmin;
-
- ath_rc_priv->rssi_sum =
- ath_rc_priv->rssi_sum_cnt = 0;
-
- /* Now reduce the current rssi threshold */
- if ((rssi_ackAvg < rssi_thres + 2) &&
- (rssi_thres > rssi_ack_vmin)) {
- ath_rc_priv->state[tx_rate].rssi_thres--;
- }
-
- state_change = true;
}
}
-exit:
+
return state_change;
}
@@ -1134,11 +1006,6 @@
struct ath_tx_info_priv *tx_info_priv,
int tx_rate, int xretries, int retries)
{
-#define CHK_RSSI(rate) \
- ((ath_rc_priv->state[(rate)].rssi_thres + \
- rate_table->info[(rate)].rssi_ack_deltamin) > \
- ath_rc_priv->state[(rate)+1].rssi_thres)
-
u32 now_msec = jiffies_to_msecs(jiffies);
int rate;
u8 last_per;
@@ -1149,14 +1016,7 @@
if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
return;
- /* To compensate for some imbalance between ctrl and ext. channel */
-
- if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy))
- tx_info_priv->tx.ts_rssi =
- tx_info_priv->tx.ts_rssi < 3 ? 0 :
- tx_info_priv->tx.ts_rssi - 3;
-
- last_per = ath_rc_priv->state[tx_rate].per;
+ last_per = ath_rc_priv->per[tx_rate];
/* Update PER first */
state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv,
@@ -1167,114 +1027,52 @@
* If this rate looks bad (high PER) then stop using it for
* a while (except if we are probing).
*/
- if (ath_rc_priv->state[tx_rate].per >= 55 && tx_rate > 0 &&
+ if (ath_rc_priv->per[tx_rate] >= 55 && tx_rate > 0 &&
rate_table->info[tx_rate].ratekbps <=
rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) {
- ath_rc_get_nextlowervalid_txrate(rate_table, ath_rc_priv,
- (u8)tx_rate, &ath_rc_priv->rate_max_phy);
+ ath_rc_get_lower_rix(rate_table, ath_rc_priv,
+ (u8)tx_rate, &ath_rc_priv->rate_max_phy);
/* Don't probe for a little while. */
ath_rc_priv->probe_time = now_msec;
}
- if (state_change) {
- /*
- * Make sure the rates above this have higher rssi thresholds.
- * (Note: Monotonicity is kept within the OFDM rates and
- * within the CCK rates. However, no adjustment is
- * made to keep the rssi thresholds monotonically
- * increasing between the CCK and OFDM rates.)
- */
- for (rate = tx_rate; rate < size - 1; rate++) {
- if (rate_table->info[rate+1].phy !=
- rate_table->info[tx_rate].phy)
- break;
-
- if (CHK_RSSI(rate)) {
- ath_rc_priv->state[rate+1].rssi_thres =
- ath_rc_priv->state[rate].rssi_thres +
- rate_table->info[rate].rssi_ack_deltamin;
- }
- }
-
- /* Make sure the rates below this have lower rssi thresholds. */
- for (rate = tx_rate - 1; rate >= 0; rate--) {
- if (rate_table->info[rate].phy !=
- rate_table->info[tx_rate].phy)
- break;
-
- if (CHK_RSSI(rate)) {
- if (ath_rc_priv->state[rate+1].rssi_thres <
- rate_table->info[rate].rssi_ack_deltamin)
- ath_rc_priv->state[rate].rssi_thres = 0;
- else {
- ath_rc_priv->state[rate].rssi_thres =
- ath_rc_priv->state[rate+1].rssi_thres -
- rate_table->info[rate].rssi_ack_deltamin;
- }
-
- if (ath_rc_priv->state[rate].rssi_thres <
- rate_table->info[rate].rssi_ack_validmin) {
- ath_rc_priv->state[rate].rssi_thres =
- rate_table->info[rate].rssi_ack_validmin;
- }
- }
- }
- }
-
/* Make sure the rates below this have lower PER */
/* Monotonicity is kept only for rates below the current rate. */
- if (ath_rc_priv->state[tx_rate].per < last_per) {
+ if (ath_rc_priv->per[tx_rate] < last_per) {
for (rate = tx_rate - 1; rate >= 0; rate--) {
- if (rate_table->info[rate].phy !=
- rate_table->info[tx_rate].phy)
- break;
- if (ath_rc_priv->state[rate].per >
- ath_rc_priv->state[rate+1].per) {
- ath_rc_priv->state[rate].per =
- ath_rc_priv->state[rate+1].per;
+ if (ath_rc_priv->per[rate] >
+ ath_rc_priv->per[rate+1]) {
+ ath_rc_priv->per[rate] =
+ ath_rc_priv->per[rate+1];
}
}
}
/* Maintain monotonicity for rates above the current rate */
for (rate = tx_rate; rate < size - 1; rate++) {
- if (ath_rc_priv->state[rate+1].per <
- ath_rc_priv->state[rate].per)
- ath_rc_priv->state[rate+1].per =
- ath_rc_priv->state[rate].per;
- }
-
- /* Every so often, we reduce the thresholds and
- * PER (different for CCK and OFDM). */
- if (now_msec - ath_rc_priv->rssi_down_time >=
- rate_table->rssi_reduce_interval) {
-
- for (rate = 0; rate < size; rate++) {
- if (ath_rc_priv->state[rate].rssi_thres >
- rate_table->info[rate].rssi_ack_validmin)
- ath_rc_priv->state[rate].rssi_thres -= 1;
- }
- ath_rc_priv->rssi_down_time = now_msec;
+ if (ath_rc_priv->per[rate+1] <
+ ath_rc_priv->per[rate])
+ ath_rc_priv->per[rate+1] =
+ ath_rc_priv->per[rate];
}
/* Every so often, we reduce the thresholds
* and PER (different for CCK and OFDM). */
if (now_msec - ath_rc_priv->per_down_time >=
- rate_table->rssi_reduce_interval) {
+ rate_table->probe_interval) {
for (rate = 0; rate < size; rate++) {
- ath_rc_priv->state[rate].per =
- 7 * ath_rc_priv->state[rate].per / 8;
+ ath_rc_priv->per[rate] =
+ 7 * ath_rc_priv->per[rate] / 8;
}
ath_rc_priv->per_down_time = now_msec;
}
ath_debug_stat_retries(sc, tx_rate, xretries, retries,
- ath_rc_priv->state[tx_rate].per);
+ ath_rc_priv->per[tx_rate]);
-#undef CHK_RSSI
}
static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
@@ -1410,9 +1208,7 @@
/* Initialize thresholds according to the global rate table */
for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
- ath_rc_priv->state[i].rssi_thres =
- rate_table->info[i].rssi_ack_validmin;
- ath_rc_priv->state[i].per = 0;
+ ath_rc_priv->per[i] = 0;
}
/* Determine the valid rates */
@@ -1521,7 +1317,7 @@
/*
* If underrun error is seen assume it as an excessive retry only
* if prefetch trigger level have reached the max (0x3f for 5416)
- * Adjust the long retry as if the frame was tried ATH_11N_TXMAXTRY
+ * Adjust the long retry as if the frame was tried hw->max_rate_tries
* times. This affects how ratectrl updates PER for the failed rate.
*/
if (tx_info_priv->tx.ts_flags &
@@ -1536,7 +1332,7 @@
tx_status = 1;
ath_rc_tx_status(sc, ath_rc_priv, tx_info, final_ts_idx, tx_status,
- (is_underrun) ? ATH_11N_TXMAXTRY :
+ (is_underrun) ? sc->hw->max_rate_tries :
tx_info_priv->tx.ts_longretry);
/* Check if aggregation has to be enabled for this tid */
@@ -1560,31 +1356,6 @@
kfree(tx_info_priv);
}
-static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
- struct ieee80211_tx_rate_control *txrc)
-{
- struct ieee80211_supported_band *sband = txrc->sband;
- struct sk_buff *skb = txrc->skb;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
- struct ath_softc *sc = priv;
- struct ath_rate_priv *ath_rc_priv = priv_sta;
- __le16 fc = hdr->frame_control;
-
- /* lowest rate for management and NO_ACK frames */
- if (!ieee80211_is_data(fc) ||
- tx_info->flags & IEEE80211_TX_CTL_NO_ACK || !sta) {
- tx_info->control.rates[0].idx = rate_lowest_index(sband, sta);
- tx_info->control.rates[0].count =
- (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) ?
- 1 : ATH_MGT_TXMAXTRY;
- return;
- }
-
- /* Find tx rate for unicast frames */
- ath_rc_ratefind(sc, ath_rc_priv, txrc);
-}
-
static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta)
{
@@ -1697,7 +1468,6 @@
return NULL;
}
- rate_priv->rssi_down_time = jiffies_to_msecs(jiffies);
rate_priv->tx_triglevel_max = sc->sc_ah->caps.tx_triglevel_max;
return rate_priv;
@@ -1725,8 +1495,6 @@
void ath_rate_attach(struct ath_softc *sc)
{
- sc->hw_rate_table[ATH9K_MODE_11B] =
- &ar5416_11b_ratetable;
sc->hw_rate_table[ATH9K_MODE_11A] =
&ar5416_11a_ratetable;
sc->hw_rate_table[ATH9K_MODE_11G] =
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index e3abd76..fa21a62 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -112,8 +112,6 @@
u8 short_preamble;
u8 dot11rate;
u8 ctrl_rate;
- int8_t rssi_ack_validmin;
- int8_t rssi_ack_deltamin;
u8 base_index;
u8 cw40index;
u8 sgi_index;
@@ -121,15 +119,9 @@
u32 max_4ms_framelen;
} info[RATE_TABLE_SIZE];
u32 probe_interval;
- u32 rssi_reduce_interval;
u8 initial_ratemax;
};
-struct ath_tx_ratectrl_state {
- int8_t rssi_thres; /* required rssi for this rate (dB) */
- u8 per; /* recent estimate of packet error rate (%) */
-};
-
struct ath_rateset {
u8 rs_nrates;
u8 rs_rates[ATH_RATE_MAX];
@@ -138,22 +130,14 @@
/**
* struct ath_rate_priv - Rate Control priv data
* @state: RC state
- * @rssi_last: last ACK rssi
- * @rssi_last_lookup: last ACK rssi used for lookup
- * @rssi_last_prev: previous last ACK rssi
- * @rssi_last_prev2: 2nd previous last ACK rssi
- * @rssi_sum_cnt: count of rssi_sum for averaging
- * @rssi_sum_rate: rate that we are averaging
- * @rssi_sum: running sum of rssi for averaging
* @probe_rate: rate we are probing at
- * @rssi_time: msec timestamp for last ack rssi
- * @rssi_down_time: msec timestamp for last down step
* @probe_time: msec timestamp for last probe
* @hw_maxretry_pktcnt: num of packets since we got HW max retry error
* @max_valid_rate: maximum number of valid rate
* @per_down_time: msec timestamp for last PER down step
* @valid_phy_ratecnt: valid rate count
* @rate_max_phy: phy index for the max rate
+ * @per: PER for every valid rate in %
* @probe_interval: interval for ratectrl to probe for other rates
* @prev_data_rix: rate idx of last data frame
* @ht_cap: HT capabilities
@@ -161,13 +145,6 @@
* @neg_ht_rates: Negotiated HT rates
*/
struct ath_rate_priv {
- int8_t rssi_last;
- int8_t rssi_last_lookup;
- int8_t rssi_last_prev;
- int8_t rssi_last_prev2;
- int32_t rssi_sum_cnt;
- int32_t rssi_sum_rate;
- int32_t rssi_sum;
u8 rate_table_size;
u8 probe_rate;
u8 hw_maxretry_pktcnt;
@@ -177,14 +154,12 @@
u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
u8 rate_max_phy;
- u32 rssi_time;
- u32 rssi_down_time;
+ u8 per[RATE_TABLE_SIZE];
u32 probe_time;
u32 per_down_time;
u32 probe_interval;
u32 prev_data_rix;
u32 tx_triglevel_max;
- struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE];
struct ath_rateset neg_rates;
struct ath_rateset neg_ht_rates;
struct ath_rate_softc *asc;
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index cece1c4..ec0abf8 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -100,38 +100,6 @@
return (tsf & ~0x7fff) | rstamp;
}
-static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len, gfp_t gfp_mask)
-{
- struct sk_buff *skb;
- u32 off;
-
- /*
- * Cache-line-align. This is important (for the
- * 5210 at least) as not doing so causes bogus data
- * in rx'd frames.
- */
-
- /* Note: the kernel can allocate a value greater than
- * what we ask it to give us. We really only need 4 KB as that
- * is this hardware supports and in fact we need at least 3849
- * as that is the MAX AMSDU size this hardware supports.
- * Unfortunately this means we may get 8 KB here from the
- * kernel... and that is actually what is observed on some
- * systems :( */
- skb = __dev_alloc_skb(len + sc->cachelsz - 1, gfp_mask);
- if (skb != NULL) {
- off = ((unsigned long) skb->data) % sc->cachelsz;
- if (off != 0)
- skb_reserve(skb, sc->cachelsz - off);
- } else {
- DPRINTF(sc, ATH_DBG_FATAL,
- "skbuff alloc of size %u failed\n", len);
- return NULL;
- }
-
- return skb;
-}
-
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
@@ -145,6 +113,10 @@
u8 ratecode;
__le16 fc;
struct ieee80211_hw *hw;
+ struct ieee80211_sta *sta;
+ struct ath_node *an;
+ int last_rssi = ATH_RSSI_DUMMY_MARKER;
+
hdr = (struct ieee80211_hdr *)skb->data;
fc = hdr->frame_control;
@@ -229,17 +201,61 @@
}
}
+ rcu_read_lock();
+ sta = ieee80211_find_sta(sc->hw, hdr->addr2);
+ if (sta) {
+ an = (struct ath_node *) sta->drv_priv;
+ if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD &&
+ !ds->ds_rxstat.rs_moreaggr)
+ ATH_RSSI_LPF(an->last_rssi, ds->ds_rxstat.rs_rssi);
+ last_rssi = an->last_rssi;
+ }
+ rcu_read_unlock();
+
+ if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
+ ds->ds_rxstat.rs_rssi = ATH_EP_RND(last_rssi,
+ ATH_RSSI_EP_MULTIPLIER);
+ if (ds->ds_rxstat.rs_rssi < 0)
+ ds->ds_rxstat.rs_rssi = 0;
+ else if (ds->ds_rxstat.rs_rssi > 127)
+ ds->ds_rxstat.rs_rssi = 127;
+
+ /* Update Beacon RSSI, this is used by ANI. */
+ if (ieee80211_is_beacon(fc))
+ sc->sc_ah->stats.avgbrssi = ds->ds_rxstat.rs_rssi;
+
rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp);
rx_status->band = hw->conf.channel->band;
rx_status->freq = hw->conf.channel->center_freq;
rx_status->noise = sc->ani.noise_floor;
- rx_status->signal = rx_status->noise + ds->ds_rxstat.rs_rssi;
+ rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + ds->ds_rxstat.rs_rssi;
rx_status->antenna = ds->ds_rxstat.rs_antenna;
- /* at 45 you will be able to use MCS 15 reliably. A more elaborate
- * scheme can be used here but it requires tables of SNR/throughput for
- * each possible mode used. */
- rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 45;
+ /*
+ * Theory for reporting quality:
+ *
+ * At a hardware RSSI of 45 you will be able to use MCS 7 reliably.
+ * At a hardware RSSI of 45 you will be able to use MCS 15 reliably.
+ * At a hardware RSSI of 35 you should be able use 54 Mbps reliably.
+ *
+ * MCS 7 is the highets MCS index usable by a 1-stream device.
+ * MCS 15 is the highest MCS index usable by a 2-stream device.
+ *
+ * All ath9k devices are either 1-stream or 2-stream.
+ *
+ * How many bars you see is derived from the qual reporting.
+ *
+ * A more elaborate scheme can be used here but it requires tables
+ * of SNR/throughput for each possible mode used. For the MCS table
+ * you can refer to the wireless wiki:
+ *
+ * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
+ *
+ */
+ if (conf_is_ht(&hw->conf))
+ rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 45;
+ else
+ rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 35;
/* rssi can be more than 45 though, anything above that
* should be considered at 100% */
@@ -288,10 +304,10 @@
spin_lock_init(&sc->rx.rxbuflock);
sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
- min(sc->cachelsz, (u16)64));
+ min(sc->common.cachelsz, (u16)64));
DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
- sc->cachelsz, sc->rx.bufsize);
+ sc->common.cachelsz, sc->rx.bufsize);
/* Initialize rx descriptors */
@@ -304,7 +320,7 @@
}
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
- skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
+ skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_KERNEL);
if (skb == NULL) {
error = -ENOMEM;
goto err;
@@ -404,15 +420,18 @@
else
rfilt |= ATH9K_RX_FILTER_BEACON;
- /* If in HOSTAP mode, want to enable reception of PSPOLL frames */
- if (sc->sc_ah->opmode == NL80211_IFTYPE_AP)
+ if (sc->rx.rxfilter & FIF_PSPOLL)
rfilt |= ATH9K_RX_FILTER_PSPOLL;
- if (sc->sec_wiphy) {
+ if (conf_is_ht(&sc->hw->conf))
+ rfilt |= ATH9K_RX_FILTER_COMP_BAR;
+
+ if (sc->sec_wiphy || (sc->rx.rxfilter & FIF_OTHER_BSS)) {
/* TODO: only needed if more than one BSSID is in use in
* station/adhoc mode */
- /* TODO: for older chips, may need to add ATH9K_RX_FILTER_PROM
- */
+ /* The following may also be needed for other older chips */
+ if (sc->sc_ah->hw_version.macVersion == AR_SREV_VERSION_9160)
+ rfilt |= ATH9K_RX_FILTER_PROM;
rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL;
}
@@ -505,11 +524,6 @@
return false;
}
-static void ath_rx_ps_back_to_sleep(struct ath_softc *sc)
-{
- sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
-}
-
static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
{
struct ieee80211_mgmt *mgmt;
@@ -521,6 +535,8 @@
if (memcmp(sc->curbssid, mgmt->bssid, ETH_ALEN) != 0)
return; /* not from our current AP */
+ sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
+
if (sc->sc_flags & SC_OP_BEACON_SYNC) {
sc->sc_flags &= ~SC_OP_BEACON_SYNC;
DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on "
@@ -528,14 +544,6 @@
ath_beacon_config(sc, NULL);
}
- if (!(sc->hw->conf.flags & IEEE80211_CONF_PS)) {
- /* We are not in PS mode anymore; remain awake */
- DPRINTF(sc, ATH_DBG_PS, "Not in PS mode anymore, remain "
- "awake\n");
- sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
- return;
- }
-
if (ath_beacon_dtim_pending_cab(skb)) {
/*
* Remain awake waiting for buffered broadcast/multicast
@@ -556,11 +564,9 @@
* fails to send a frame indicating that all CAB frames have
* been delivered.
*/
+ sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
}
-
- /* No more broadcast/multicast frames to be received at this point. */
- ath_rx_ps_back_to_sleep(sc);
}
static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
@@ -578,13 +584,13 @@
ieee80211_is_action(hdr->frame_control)) &&
is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_moredata(hdr->frame_control)) {
- DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
- "sleep\n");
/*
* No more broadcast/multicast frames to be received at this
* point.
*/
- ath_rx_ps_back_to_sleep(sc);
+ sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
+ DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
+ "sleep\n");
} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
@@ -619,13 +625,18 @@
if (aphy == NULL)
continue;
nskb = skb_copy(skb, GFP_ATOMIC);
- if (nskb)
- __ieee80211_rx(aphy->hw, nskb, rx_status);
+ if (nskb) {
+ memcpy(IEEE80211_SKB_RXCB(nskb), rx_status,
+ sizeof(*rx_status));
+ ieee80211_rx(aphy->hw, nskb);
+ }
}
- __ieee80211_rx(sc->hw, skb, rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
+ ieee80211_rx(sc->hw, skb);
} else {
/* Deliver unicast frames based on receiver address */
- __ieee80211_rx(ath_get_virt_hw(sc, hdr), skb, rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
+ ieee80211_rx(ath_get_virt_hw(sc, hdr), skb);
}
}
@@ -738,7 +749,7 @@
/* Ensure we always have an skb to requeue once we are done
* processing the current buffer's skb */
- requeue_skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_ATOMIC);
+ requeue_skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_ATOMIC);
/* If there is no memory we ignore the current RX'd frame,
* tell hardware it can give us a new frame using the old
@@ -753,7 +764,6 @@
DMA_FROM_DEVICE);
skb_put(skb, ds->ds_rxstat.rs_datalen);
- skb->protocol = cpu_to_be16(ETH_P_CONTROL);
/* see if any padding is done by the hw and remove it */
hdr = (struct ieee80211_hdr *)skb->data;
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 5260524..e5c29eb 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -234,7 +234,15 @@
#define AR_IMR_S5 0x00b8
#define AR_IMR_S5_TIM_TIMER 0x00000010
#define AR_IMR_S5_DTIM_TIMER 0x00000020
-
+#define AR_ISR_S5_GENTIMER_TRIG 0x0000FF80
+#define AR_ISR_S5_GENTIMER_TRIG_S 0
+#define AR_ISR_S5_GENTIMER_THRESH 0xFF800000
+#define AR_ISR_S5_GENTIMER_THRESH_S 16
+#define AR_ISR_S5_S 0x00d8
+#define AR_IMR_S5_GENTIMER_TRIG 0x0000FF80
+#define AR_IMR_S5_GENTIMER_TRIG_S 0
+#define AR_IMR_S5_GENTIMER_THRESH 0xFF800000
+#define AR_IMR_S5_GENTIMER_THRESH_S 16
#define AR_IMR 0x00a0
#define AR_IMR_RXOK 0x00000001
@@ -574,6 +582,7 @@
#define AR_D_GBL_IFS_SIFS 0x1030
#define AR_D_GBL_IFS_SIFS_M 0x0000FFFF
+#define AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR 0x000003AB
#define AR_D_GBL_IFS_SIFS_RESV0 0xFFFFFFFF
#define AR_D_TXBLK_BASE 0x1038
@@ -589,10 +598,12 @@
#define AR_D_GBL_IFS_SLOT 0x1070
#define AR_D_GBL_IFS_SLOT_M 0x0000FFFF
#define AR_D_GBL_IFS_SLOT_RESV0 0xFFFF0000
+#define AR_D_GBL_IFS_SLOT_ASYNC_FIFO_DUR 0x00000420
#define AR_D_GBL_IFS_EIFS 0x10b0
#define AR_D_GBL_IFS_EIFS_M 0x0000FFFF
#define AR_D_GBL_IFS_EIFS_RESV0 0xFFFF0000
+#define AR_D_GBL_IFS_EIFS_ASYNC_FIFO_DUR 0x0000A5EB
#define AR_D_GBL_IFS_MISC 0x10f0
#define AR_D_GBL_IFS_MISC_LFSR_SLICE_SEL 0x00000007
@@ -738,6 +749,13 @@
#define AR_SREV_REVISION_9285_10 0
#define AR_SREV_REVISION_9285_11 1
#define AR_SREV_REVISION_9285_12 2
+#define AR_SREV_VERSION_9287 0x180
+#define AR_SREV_REVISION_9287_10 0
+#define AR_SREV_REVISION_9287_11 1
+#define AR_SREV_REVISION_9287_12 2
+#define AR_SREV_VERSION_9271 0x140
+#define AR_SREV_REVISION_9271_10 0
+#define AR_SREV_REVISION_9271_11 1
#define AR_SREV_5416(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) || \
@@ -794,6 +812,36 @@
(AR_SREV_9285(ah) && ((_ah)->hw_version.macRev >= \
AR_SREV_REVISION_9285_12)))
+#define AR_SREV_9287(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9287))
+#define AR_SREV_9287_10_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9287))
+#define AR_SREV_9287_10(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9287) && \
+ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9287_10))
+#define AR_SREV_9287_11(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9287) && \
+ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9287_11))
+#define AR_SREV_9287_11_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion > AR_SREV_VERSION_9287) || \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9287) && \
+ ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9287_11)))
+#define AR_SREV_9287_12(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9287) && \
+ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9287_12))
+#define AR_SREV_9287_12_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion > AR_SREV_VERSION_9287) || \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9287) && \
+ ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9287_12)))
+#define AR_SREV_9271(_ah) \
+ (((_ah))->hw_version.macVersion == AR_SREV_VERSION_9271)
+#define AR_SREV_9271_10(_ah) \
+ (AR_SREV_9271(_ah) && \
+ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9271_10))
+#define AR_SREV_9271_11(_ah) \
+ (AR_SREV_9271(_ah) && \
+ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9271_11))
+
#define AR_RADIO_SREV_MAJOR 0xf0
#define AR_RAD5133_SREV_MAJOR 0xc0
#define AR_RAD2133_SREV_MAJOR 0xd0
@@ -809,6 +857,9 @@
#define AR_AHB_PAGE_SIZE_1K 0x00000000
#define AR_AHB_PAGE_SIZE_2K 0x00000008
#define AR_AHB_PAGE_SIZE_4K 0x00000010
+#define AR_AHB_CUSTOM_BURST_EN 0x000000C0
+#define AR_AHB_CUSTOM_BURST_EN_S 6
+#define AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL 3
#define AR_INTR_RTC_IRQ 0x00000001
#define AR_INTR_MAC_IRQ 0x00000002
@@ -885,6 +936,7 @@
#define AR_NUM_GPIO 14
#define AR928X_NUM_GPIO 10
#define AR9285_NUM_GPIO 12
+#define AR9287_NUM_GPIO 11
#define AR_GPIO_IN_OUT 0x4048
#define AR_GPIO_IN_VAL 0x0FFFC000
@@ -893,6 +945,8 @@
#define AR928X_GPIO_IN_VAL_S 10
#define AR9285_GPIO_IN_VAL 0x00FFF000
#define AR9285_GPIO_IN_VAL_S 12
+#define AR9287_GPIO_IN_VAL 0x003FF800
+#define AR9287_GPIO_IN_VAL_S 11
#define AR_GPIO_OE_OUT 0x404c
#define AR_GPIO_OE_OUT_DRV 0x3
@@ -916,6 +970,8 @@
#define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF_S 7
#define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB 0x00001000
#define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB_S 12
+#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB 0x00001000
+#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB_S 1
#define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB 0x00008000
#define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB_S 15
#define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE 0x00010000
@@ -924,6 +980,8 @@
#define AR_GPIO_INPUT_MUX1 0x4058
#define AR_GPIO_INPUT_MUX1_BT_ACTIVE 0x000f0000
#define AR_GPIO_INPUT_MUX1_BT_ACTIVE_S 16
+#define AR_GPIO_INPUT_MUX1_BT_PRIORITY 0x00000f00
+#define AR_GPIO_INPUT_MUX1_BT_PRIORITY_S 8
#define AR_GPIO_INPUT_MUX2 0x405c
#define AR_GPIO_INPUT_MUX2_CLK25 0x0000000f
@@ -949,6 +1007,8 @@
#define AR_OBS 0x4080
+#define AR_GPIO_PDPU 0x4088
+
#define AR_PCIE_MSI 0x4094
#define AR_PCIE_MSI_ENABLE 0x00000001
@@ -1115,12 +1175,32 @@
#define AR9285_AN_RF2G4_DB2_4 0x00003800
#define AR9285_AN_RF2G4_DB2_4_S 11
+/* AR9271 : 0x7828, 0x782c different setting from AR9285 */
+#define AR9271_AN_RF2G3_OB_cck 0x001C0000
+#define AR9271_AN_RF2G3_OB_cck_S 18
+#define AR9271_AN_RF2G3_OB_psk 0x00038000
+#define AR9271_AN_RF2G3_OB_psk_S 15
+#define AR9271_AN_RF2G3_OB_qam 0x00007000
+#define AR9271_AN_RF2G3_OB_qam_S 12
+
+#define AR9271_AN_RF2G3_DB_1 0x00E00000
+#define AR9271_AN_RF2G3_DB_1_S 21
+
+#define AR9271_AN_RF2G3_CCOMP 0xFFF
+#define AR9271_AN_RF2G3_CCOMP_S 0
+
+#define AR9271_AN_RF2G4_DB_2 0xE0000000
+#define AR9271_AN_RF2G4_DB_2_S 29
+
#define AR9285_AN_RF2G6 0x7834
#define AR9285_AN_RF2G6_CCOMP 0x00007800
#define AR9285_AN_RF2G6_CCOMP_S 11
#define AR9285_AN_RF2G6_OFFS 0x03f00000
#define AR9285_AN_RF2G6_OFFS_S 20
+#define AR9271_AN_RF2G6_OFFS 0x07f00000
+#define AR9271_AN_RF2G6_OFFS_S 20
+
#define AR9285_AN_RF2G7 0x7838
#define AR9285_AN_RF2G7_PWDDB 0x00000002
#define AR9285_AN_RF2G7_PWDDB_S 1
@@ -1154,6 +1234,38 @@
#define AR9285_AN_TOP4 0x7870
#define AR9285_AN_TOP4_DEFAULT 0x10142c00
+#define AR9287_AN_RF2G3_CH0 0x7808
+#define AR9287_AN_RF2G3_CH1 0x785c
+#define AR9287_AN_RF2G3_DB1 0xE0000000
+#define AR9287_AN_RF2G3_DB1_S 29
+#define AR9287_AN_RF2G3_DB2 0x1C000000
+#define AR9287_AN_RF2G3_DB2_S 26
+#define AR9287_AN_RF2G3_OB_CCK 0x03800000
+#define AR9287_AN_RF2G3_OB_CCK_S 23
+#define AR9287_AN_RF2G3_OB_PSK 0x00700000
+#define AR9287_AN_RF2G3_OB_PSK_S 20
+#define AR9287_AN_RF2G3_OB_QAM 0x000E0000
+#define AR9287_AN_RF2G3_OB_QAM_S 17
+#define AR9287_AN_RF2G3_OB_PAL_OFF 0x0001C000
+#define AR9287_AN_RF2G3_OB_PAL_OFF_S 14
+
+#define AR9287_AN_TXPC0 0x7898
+#define AR9287_AN_TXPC0_TXPCMODE 0x0000C000
+#define AR9287_AN_TXPC0_TXPCMODE_S 14
+#define AR9287_AN_TXPC0_TXPCMODE_NORMAL 0
+#define AR9287_AN_TXPC0_TXPCMODE_TEST 1
+#define AR9287_AN_TXPC0_TXPCMODE_TEMPSENSE 2
+#define AR9287_AN_TXPC0_TXPCMODE_ATBTEST 3
+
+#define AR9287_AN_TOP2 0x78b4
+#define AR9287_AN_TOP2_XPABIAS_LVL 0xC0000000
+#define AR9287_AN_TOP2_XPABIAS_LVL_S 30
+
+/* AR9271 specific stuff */
+#define AR9271_RESET_POWER_DOWN_CONTROL 0x50044
+#define AR9271_RADIO_RF_RST 0x20
+#define AR9271_GATE_MAC_CTL 0x4000
+
#define AR_STA_ID0 0x8000
#define AR_STA_ID1 0x8004
#define AR_STA_ID1_SADH_MASK 0x0000FFFF
@@ -1188,6 +1300,7 @@
#define AR_TIME_OUT_ACK_S 0
#define AR_TIME_OUT_CTS 0x3FFF0000
#define AR_TIME_OUT_CTS_S 16
+#define AR_TIME_OUT_ACK_CTS_ASYNC_FIFO_DUR 0x16001D56
#define AR_RSSI_THR 0x8018
#define AR_RSSI_THR_MASK 0x000000FF
@@ -1203,6 +1316,7 @@
#define AR_USEC_TX_LAT_S 14
#define AR_USEC_RX_LAT 0x1F800000
#define AR_USEC_RX_LAT_S 23
+#define AR_USEC_ASYNC_FIFO_DUR 0x12e00074
#define AR_RESET_TSF 0x8020
#define AR_RESET_TSF_ONCE 0x01000000
@@ -1211,7 +1325,6 @@
#define AR_CFP_VAL 0x0000FFFF
#define AR_RX_FILTER 0x803C
-#define AR_RX_COMPR_BAR 0x00000400
#define AR_MCAST_FIL0 0x8040
#define AR_MCAST_FIL1 0x8044
@@ -1328,6 +1441,7 @@
#define AR_QUIET1_NEXT_QUIET_M 0x0000ffff
#define AR_QUIET1_QUIET_ENABLE 0x00010000
#define AR_QUIET1_QUIET_ACK_CTS_ENABLE 0x00020000
+#define AR_QUIET1_QUIET_ACK_CTS_ENABLE_S 17
#define AR_QUIET2 0x8100
#define AR_QUIET2_QUIET_PERIOD_S 0
#define AR_QUIET2_QUIET_PERIOD_M 0x0000ffff
@@ -1373,6 +1487,8 @@
#define AR_PCU_CLEAR_VMF 0x01000000
#define AR_PCU_CLEAR_BA_VALID 0x04000000
+#define AR_PCU_BT_ANT_PREVENT_RX 0x00100000
+#define AR_PCU_BT_ANT_PREVENT_RX_S 20
#define AR_FILT_OFDM 0x8124
#define AR_FILT_OFDM_COUNT 0x00FFFFFF
@@ -1400,6 +1516,46 @@
#define AR_PHY_ERR_3_COUNT 0x00FFFFFF
#define AR_PHY_ERR_MASK_3 0x816c
+#define AR_BT_COEX_MODE 0x8170
+#define AR_BT_TIME_EXTEND 0x000000ff
+#define AR_BT_TIME_EXTEND_S 0
+#define AR_BT_TXSTATE_EXTEND 0x00000100
+#define AR_BT_TXSTATE_EXTEND_S 8
+#define AR_BT_TX_FRAME_EXTEND 0x00000200
+#define AR_BT_TX_FRAME_EXTEND_S 9
+#define AR_BT_MODE 0x00000c00
+#define AR_BT_MODE_S 10
+#define AR_BT_QUIET 0x00001000
+#define AR_BT_QUIET_S 12
+#define AR_BT_QCU_THRESH 0x0001e000
+#define AR_BT_QCU_THRESH_S 13
+#define AR_BT_RX_CLEAR_POLARITY 0x00020000
+#define AR_BT_RX_CLEAR_POLARITY_S 17
+#define AR_BT_PRIORITY_TIME 0x00fc0000
+#define AR_BT_PRIORITY_TIME_S 18
+#define AR_BT_FIRST_SLOT_TIME 0xff000000
+#define AR_BT_FIRST_SLOT_TIME_S 24
+
+#define AR_BT_COEX_WEIGHT 0x8174
+#define AR_BT_COEX_WGHT 0xff55
+#define AR_STOMP_ALL_WLAN_WGHT 0xffcc
+#define AR_STOMP_LOW_WLAN_WGHT 0xaaa8
+#define AR_STOMP_NONE_WLAN_WGHT 0xaa00
+#define AR_BTCOEX_BT_WGHT 0x0000ffff
+#define AR_BTCOEX_BT_WGHT_S 0
+#define AR_BTCOEX_WL_WGHT 0xffff0000
+#define AR_BTCOEX_WL_WGHT_S 16
+
+#define AR_BT_COEX_MODE2 0x817c
+#define AR_BT_BCN_MISS_THRESH 0x000000ff
+#define AR_BT_BCN_MISS_THRESH_S 0
+#define AR_BT_BCN_MISS_CNT 0x0000ff00
+#define AR_BT_BCN_MISS_CNT_S 8
+#define AR_BT_HOLD_RX_CLEAR 0x00010000
+#define AR_BT_HOLD_RX_CLEAR_S 16
+#define AR_BT_DISABLE_BT_ANT 0x00100000
+#define AR_BT_DISABLE_BT_ANT_S 20
+
#define AR_TXSIFS 0x81d0
#define AR_TXSIFS_TIME 0x000000FF
#define AR_TXSIFS_TX_LATENCY 0x00000F00
@@ -1416,7 +1572,10 @@
#define AR_TXOP_8_11 0x81f8
#define AR_TXOP_12_15 0x81fc
-
+#define AR_NEXT_NDP2_TIMER 0x8180
+#define AR_FIRST_NDP_TIMER 7
+#define AR_NDP2_PERIOD 0x81a0
+#define AR_NDP2_TIMER_MODE 0x81c0
#define AR_NEXT_TBTT_TIMER 0x8200
#define AR_NEXT_DMA_BEACON_ALERT 0x8204
#define AR_NEXT_SWBA 0x8208
@@ -1468,6 +1627,10 @@
#define AR_SLP_MIB_CLEAR 0x00000001
#define AR_SLP_MIB_PENDING 0x00000002
+#define AR_MAC_PCU_LOGIC_ANALYZER 0x8264
+#define AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768 0x20000000
+
+
#define AR_2040_MODE 0x8318
#define AR_2040_JOINED_RX_CLEAR 0x00000001
@@ -1485,6 +1648,39 @@
#define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002
#define AR_PCU_MISC_MODE2_NO_CRYPTO_FOR_NON_DATA_PKT 0x00000004
+#define AR_PCU_MISC_MODE2_RESERVED 0x00000038
+#define AR_PCU_MISC_MODE2_ADHOC_MCAST_KEYID_ENABLE 0x00000040
+#define AR_PCU_MISC_MODE2_CFP_IGNORE 0x00000080
+#define AR_PCU_MISC_MODE2_MGMT_QOS 0x0000FF00
+#define AR_PCU_MISC_MODE2_MGMT_QOS_S 8
+#define AR_PCU_MISC_MODE2_ENABLE_LOAD_NAV_BEACON_DURATION 0x00010000
+#define AR_PCU_MISC_MODE2_ENABLE_AGGWEP 0x00020000
+#define AR_PCU_MISC_MODE2_HWWAR1 0x00100000
+#define AR_PCU_MISC_MODE2_HWWAR2 0x02000000
+#define AR_PCU_MISC_MODE2_RESERVED2 0xFFFE0000
+
+#define AR_MAC_PCU_ASYNC_FIFO_REG3 0x8358
+#define AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL 0x00000400
+#define AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET 0x80000000
+
+
+#define AR_AES_MUTE_MASK0 0x805c
+#define AR_AES_MUTE_MASK0_FC 0x0000FFFF
+#define AR_AES_MUTE_MASK0_QOS 0xFFFF0000
+#define AR_AES_MUTE_MASK0_QOS_S 16
+
+#define AR_AES_MUTE_MASK1 0x8060
+#define AR_AES_MUTE_MASK1_SEQ 0x0000FFFF
+#define AR_AES_MUTE_MASK1_SEQ_S 0
+#define AR_AES_MUTE_MASK1_FC_MGMT 0xFFFF0000
+#define AR_AES_MUTE_MASK1_FC_MGMT_S 16
+
+#define AR_RATE_DURATION_0 0x8700
+#define AR_RATE_DURATION_31 0x87CC
+#define AR_RATE_DURATION_32 0x8780
+#define AR_RATE_DURATION(_n) (AR_RATE_DURATION_0 + ((_n)<<2))
+
+
#define AR_KEYTABLE_0 0x8800
#define AR_KEYTABLE(_n) (AR_KEYTABLE_0 + ((_n)*32))
#define AR_KEY_CACHE_SIZE 128
diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index 1ff429b..19b88f8 100644
--- a/drivers/net/wireless/ath/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
@@ -351,7 +351,7 @@
* Drop from tasklet to work to allow mutex for channel
* change.
*/
- queue_work(aphy->sc->hw->workqueue,
+ ieee80211_queue_work(aphy->sc->hw,
&aphy->sc->chan_work);
}
}
@@ -367,7 +367,7 @@
struct ath_softc *sc = aphy->sc;
aphy->state = ATH_WIPHY_PAUSED;
if (!__ath9k_wiphy_pausing(sc))
- queue_work(sc->hw->workqueue, &sc->chan_work);
+ ieee80211_queue_work(sc->hw, &sc->chan_work);
}
static void ath9k_pause_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
@@ -521,7 +521,7 @@
spin_unlock_bh(&sc->wiphy_lock);
ath_radio_disable(sc);
ath_radio_enable(sc);
- queue_work(aphy->sc->hw->workqueue,
+ ieee80211_queue_work(aphy->sc->hw,
&aphy->sc->chan_work);
return -EBUSY; /* previous select still in progress */
}
@@ -541,7 +541,7 @@
if (now) {
/* Ready to request channel change immediately */
- queue_work(aphy->sc->hw->workqueue, &aphy->sc->chan_work);
+ ieee80211_queue_work(aphy->sc->hw, &aphy->sc->chan_work);
}
/*
@@ -648,8 +648,9 @@
"change\n");
}
- queue_delayed_work(sc->hw->workqueue, &sc->wiphy_work,
- sc->wiphy_scheduler_int);
+ ieee80211_queue_delayed_work(sc->hw,
+ &sc->wiphy_work,
+ sc->wiphy_scheduler_int);
}
void ath9k_wiphy_set_scheduler(struct ath_softc *sc, unsigned int msec_int)
@@ -657,6 +658,23 @@
cancel_delayed_work_sync(&sc->wiphy_work);
sc->wiphy_scheduler_int = msecs_to_jiffies(msec_int);
if (sc->wiphy_scheduler_int)
- queue_delayed_work(sc->hw->workqueue, &sc->wiphy_work,
- sc->wiphy_scheduler_int);
+ ieee80211_queue_delayed_work(sc->hw, &sc->wiphy_work,
+ sc->wiphy_scheduler_int);
+}
+
+/* caller must hold wiphy_lock */
+bool ath9k_all_wiphys_idle(struct ath_softc *sc)
+{
+ unsigned int i;
+ if (sc->pri_wiphy->state != ATH_WIPHY_INACTIVE) {
+ return false;
+ }
+ for (i = 0; i < sc->num_sec_wiphy; i++) {
+ struct ath_wiphy *aphy = sc->sec_wiphy[i];
+ if (!aphy)
+ continue;
+ if (aphy->state != ATH_WIPHY_INACTIVE)
+ return false;
+ }
+ return true;
}
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 4ccf48e..42551a4 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -59,6 +59,7 @@
struct ath_atx_tid *tid,
struct list_head *bf_head);
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
+ struct ath_txq *txq,
struct list_head *bf_q,
int txok, int sendbar);
static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
@@ -73,18 +74,6 @@
/* Aggregation logic */
/*********************/
-static int ath_aggr_query(struct ath_softc *sc, struct ath_node *an, u8 tidno)
-{
- struct ath_atx_tid *tid;
- tid = ATH_AN_2_TID(an, tidno);
-
- if (tid->state & AGGR_ADDBA_COMPLETE ||
- tid->state & AGGR_ADDBA_PROGRESS)
- return 1;
- else
- return 0;
-}
-
static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid)
{
struct ath_atx_ac *ac = tid->ac;
@@ -224,7 +213,7 @@
ath_tx_update_baw(sc, tid, bf->bf_seqno);
spin_unlock(&txq->axq_lock);
- ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, 0, 0);
spin_lock(&txq->axq_lock);
}
@@ -232,13 +221,15 @@
tid->baw_tail = tid->baw_head;
}
-static void ath_tx_set_retry(struct ath_softc *sc, struct ath_buf *bf)
+static void ath_tx_set_retry(struct ath_softc *sc, struct ath_txq *txq,
+ struct ath_buf *bf)
{
struct sk_buff *skb;
struct ieee80211_hdr *hdr;
bf->bf_state.bf_type |= BUF_RETRY;
bf->bf_retries++;
+ TX_STAT_INC(txq->axq_qnum, a_retries);
skb = bf->bf_mpdu;
hdr = (struct ieee80211_hdr *)skb->data;
@@ -250,7 +241,10 @@
struct ath_buf *tbf;
spin_lock_bh(&sc->tx.txbuflock);
- ASSERT(!list_empty((&sc->tx.txbuf)));
+ if (WARN_ON(list_empty(&sc->tx.txbuf))) {
+ spin_unlock_bh(&sc->tx.txbuflock);
+ return NULL;
+ }
tbf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list);
list_del(&tbf->list);
spin_unlock_bh(&sc->tx.txbuflock);
@@ -337,7 +331,7 @@
if (!(tid->state & AGGR_CLEANUP) &&
ds->ds_txstat.ts_flags != ATH9K_TX_SW_ABORTED) {
if (bf->bf_retries < ATH_MAX_SW_RETRIES) {
- ath_tx_set_retry(sc, bf);
+ ath_tx_set_retry(sc, txq, bf);
txpending = 1;
} else {
bf->bf_state.bf_type |= BUF_XRETRY;
@@ -384,13 +378,31 @@
ath_tx_rc_status(bf, ds, nbad, txok, false);
}
- ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, !txfail, sendbar);
} else {
/* retry the un-acked ones */
if (bf->bf_next == NULL && bf_last->bf_stale) {
struct ath_buf *tbf;
tbf = ath_clone_txbuf(sc, bf_last);
+ /*
+ * Update tx baw and complete the frame with
+ * failed status if we run out of tx buf
+ */
+ if (!tbf) {
+ spin_lock_bh(&txq->axq_lock);
+ ath_tx_update_baw(sc, tid,
+ bf->bf_seqno);
+ spin_unlock_bh(&txq->axq_lock);
+
+ bf->bf_state.bf_type |= BUF_XRETRY;
+ ath_tx_rc_status(bf, ds, nbad,
+ 0, false);
+ ath_tx_complete_buf(sc, bf, txq,
+ &bf_head, 0, 0);
+ break;
+ }
+
ath9k_hw_cleartxdesc(sc->sc_ah, tbf->bf_desc);
list_add_tail(&tbf->list, &bf_head);
} else {
@@ -414,7 +426,6 @@
if (tid->state & AGGR_CLEANUP) {
if (tid->baw_head == tid->baw_tail) {
tid->state &= ~AGGR_ADDBA_COMPLETE;
- tid->addba_exchangeattempts = 0;
tid->state &= ~AGGR_CLEANUP;
/* send buffered frames as singles */
@@ -447,7 +458,7 @@
struct ieee80211_tx_rate *rates;
struct ath_tx_info_priv *tx_info_priv;
u32 max_4ms_framelen, frmlen;
- u16 aggr_limit, legacy = 0, maxampdu;
+ u16 aggr_limit, legacy = 0;
int i;
skb = bf->bf_mpdu;
@@ -482,16 +493,20 @@
if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
return 0;
- aggr_limit = min(max_4ms_framelen, (u32)ATH_AMPDU_LIMIT_DEFAULT);
+ if (sc->sc_flags & SC_OP_BT_PRIORITY_DETECTED)
+ aggr_limit = min((max_4ms_framelen * 3) / 8,
+ (u32)ATH_AMPDU_LIMIT_MAX);
+ else
+ aggr_limit = min(max_4ms_framelen,
+ (u32)ATH_AMPDU_LIMIT_MAX);
/*
* h/w can accept aggregates upto 16 bit lengths (65535).
* The IE, however can hold upto 65536, which shows up here
* as zero. Ignore 65536 since we are constrained by hw.
*/
- maxampdu = tid->an->maxampdu;
- if (maxampdu)
- aggr_limit = min(aggr_limit, maxampdu);
+ if (tid->an->maxampdu)
+ aggr_limit = min(aggr_limit, tid->an->maxampdu);
return aggr_limit;
}
@@ -499,7 +514,6 @@
/*
* Returns the number of delimiters to be added to
* meet the minimum required mpdudensity.
- * caller should make sure that the rate is HT rate .
*/
static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
struct ath_buf *bf, u16 frmlen)
@@ -507,7 +521,7 @@
const struct ath_rate_table *rt = sc->cur_rate_table;
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
- u32 nsymbits, nsymbols, mpdudensity;
+ u32 nsymbits, nsymbols;
u16 minlen;
u8 rc, flags, rix;
int width, half_gi, ndelim, mindelim;
@@ -529,14 +543,12 @@
* on highest rate in rate series (i.e. first rate) to determine
* required minimum length for subframe. Take into account
* whether high rate is 20 or 40Mhz and half or full GI.
- */
- mpdudensity = tid->an->mpdudensity;
-
- /*
+ *
* If there is no mpdu density restriction, no further calculation
* is needed.
*/
- if (mpdudensity == 0)
+
+ if (tid->an->mpdudensity == 0)
return ndelim;
rix = tx_info->control.rates[0].idx;
@@ -546,9 +558,9 @@
half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0;
if (half_gi)
- nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity);
+ nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(tid->an->mpdudensity);
else
- nsymbols = NUM_SYMBOLS_PER_USEC(mpdudensity);
+ nsymbols = NUM_SYMBOLS_PER_USEC(tid->an->mpdudensity);
if (nsymbols == 0)
nsymbols = 1;
@@ -565,6 +577,7 @@
}
static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
+ struct ath_txq *txq,
struct ath_atx_tid *tid,
struct list_head *bf_q)
{
@@ -629,6 +642,7 @@
bf_prev->bf_desc->ds_link = bf->bf_daddr;
}
bf_prev = bf;
+
} while (!list_empty(&tid->buf_q));
bf_first->bf_al = al;
@@ -651,7 +665,7 @@
INIT_LIST_HEAD(&bf_q);
- status = ath_tx_form_aggr(sc, tid, &bf_q);
+ status = ath_tx_form_aggr(sc, txq, tid, &bf_q);
/*
* no frames picked up to be aggregated;
@@ -682,30 +696,26 @@
txq->axq_aggr_depth++;
ath_tx_txqaddbuf(sc, txq, &bf_q);
+ TX_STAT_INC(txq->axq_qnum, a_aggr);
} while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH &&
status != ATH_AGGR_BAW_CLOSED);
}
-int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
- u16 tid, u16 *ssn)
+void ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
+ u16 tid, u16 *ssn)
{
struct ath_atx_tid *txtid;
struct ath_node *an;
an = (struct ath_node *)sta->drv_priv;
-
- if (sc->sc_flags & SC_OP_TXAGGR) {
- txtid = ATH_AN_2_TID(an, tid);
- txtid->state |= AGGR_ADDBA_PROGRESS;
- ath_tx_pause_tid(sc, txtid);
- *ssn = txtid->seq_start;
- }
-
- return 0;
+ txtid = ATH_AN_2_TID(an, tid);
+ txtid->state |= AGGR_ADDBA_PROGRESS;
+ ath_tx_pause_tid(sc, txtid);
+ *ssn = txtid->seq_start;
}
-int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
+void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
@@ -715,12 +725,11 @@
INIT_LIST_HEAD(&bf_head);
if (txtid->state & AGGR_CLEANUP)
- return 0;
+ return;
if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
txtid->state &= ~AGGR_ADDBA_PROGRESS;
- txtid->addba_exchangeattempts = 0;
- return 0;
+ return;
}
ath_tx_pause_tid(sc, txtid);
@@ -739,7 +748,7 @@
}
list_move_tail(&bf->list, &bf_head);
ath_tx_update_baw(sc, txtid, bf->bf_seqno);
- ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, 0, 0);
}
spin_unlock_bh(&txq->axq_lock);
@@ -747,11 +756,8 @@
txtid->state |= AGGR_CLEANUP;
} else {
txtid->state &= ~AGGR_ADDBA_COMPLETE;
- txtid->addba_exchangeattempts = 0;
ath_tx_flush_tid(sc, txtid);
}
-
- return 0;
}
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
@@ -780,14 +786,8 @@
txtid = ATH_AN_2_TID(an, tidno);
- if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
- if (!(txtid->state & AGGR_ADDBA_PROGRESS) &&
- (txtid->addba_exchangeattempts < ADDBA_EXCHANGE_ATTEMPTS)) {
- txtid->addba_exchangeattempts++;
+ if (!(txtid->state & (AGGR_ADDBA_COMPLETE | AGGR_ADDBA_PROGRESS)))
return true;
- }
- }
-
return false;
}
@@ -870,14 +870,14 @@
spin_lock_init(&txq->axq_lock);
txq->axq_depth = 0;
txq->axq_aggr_depth = 0;
- txq->axq_totalqueued = 0;
txq->axq_linkbuf = NULL;
+ txq->axq_tx_inprogress = false;
sc->tx.txqsetup |= 1<<qnum;
}
return &sc->tx.txq[qnum];
}
-static int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype)
+int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype)
{
int qnum;
@@ -1035,9 +1035,13 @@
if (bf_isampdu(bf))
ath_tx_complete_aggr(sc, txq, bf, &bf_head, 0);
else
- ath_tx_complete_buf(sc, bf, &bf_head, 0, 0);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, 0, 0);
}
+ spin_lock_bh(&txq->axq_lock);
+ txq->axq_tx_inprogress = false;
+ spin_unlock_bh(&txq->axq_lock);
+
/* flush any pending frames if aggregation is enabled */
if (sc->sc_flags & SC_OP_TXAGGR) {
if (!retry_tx) {
@@ -1118,8 +1122,7 @@
if (tid->paused)
continue;
- if ((txq->axq_depth % 2) == 0)
- ath_tx_sched_aggr(sc, txq, tid);
+ ath_tx_sched_aggr(sc, txq, tid);
/*
* add tid to round-robin queue if more frames
@@ -1183,7 +1186,6 @@
list_splice_tail_init(head, &txq->axq_q);
txq->axq_depth++;
- txq->axq_totalqueued++;
txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
DPRINTF(sc, ATH_DBG_QUEUE,
@@ -1231,6 +1233,7 @@
bf = list_first_entry(bf_head, struct ath_buf, list);
bf->bf_state.bf_type |= BUF_AMPDU;
+ TX_STAT_INC(txctl->txq->axq_qnum, a_queued);
/*
* Do not queue to h/w when any of the following conditions is true:
@@ -1277,6 +1280,7 @@
bf->bf_lastbf = bf;
ath_buf_set_rate(sc, bf);
ath_tx_txqaddbuf(sc, txq, bf_head);
+ TX_STAT_INC(txq->axq_qnum, queued);
}
static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
@@ -1290,6 +1294,7 @@
bf->bf_nframes = 1;
ath_buf_set_rate(sc, bf);
ath_tx_txqaddbuf(sc, txq, bf_head);
+ TX_STAT_INC(txq->axq_qnum, queued);
}
static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb)
@@ -1636,7 +1641,7 @@
goto tx_done;
}
- if (ath_aggr_query(sc, an, bf->bf_tidno)) {
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
/*
* Try aggregation if it's a unicast data frame
* and the destination is HT capable.
@@ -1815,6 +1820,7 @@
}
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
+ struct ath_txq *txq,
struct list_head *bf_q,
int txok, int sendbar)
{
@@ -1822,7 +1828,6 @@
unsigned long flags;
int tx_flags = 0;
-
if (sendbar)
tx_flags = ATH_TX_BAR;
@@ -1835,6 +1840,7 @@
dma_unmap_single(sc->dev, bf->bf_dmacontext, skb->len, DMA_TO_DEVICE);
ath_tx_complete(sc, skb, tx_flags);
+ ath_debug_stat_tx(sc, txq, bf);
/*
* Return the list of ath_buf of this mpdu to free queue
@@ -1962,19 +1968,7 @@
if (bf->bf_stale) {
bf_held = bf;
if (list_is_last(&bf_held->list, &txq->axq_q)) {
- txq->axq_link = NULL;
- txq->axq_linkbuf = NULL;
spin_unlock_bh(&txq->axq_lock);
-
- /*
- * The holding descriptor is the last
- * descriptor in queue. It's safe to remove
- * the last holding descriptor in BH context.
- */
- spin_lock_bh(&sc->tx.txbuflock);
- list_move_tail(&bf_held->list, &sc->tx.txbuf);
- spin_unlock_bh(&sc->tx.txbuflock);
-
break;
} else {
bf = list_entry(bf_held->list.next,
@@ -2011,6 +2005,7 @@
txq->axq_aggr_depth--;
txok = (ds->ds_txstat.ts_status == 0);
+ txq->axq_tx_inprogress = false;
spin_unlock_bh(&txq->axq_lock);
if (bf_held) {
@@ -2033,7 +2028,7 @@
if (bf_isampdu(bf))
ath_tx_complete_aggr(sc, txq, bf, &bf_head, txok);
else
- ath_tx_complete_buf(sc, bf, &bf_head, txok, 0);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, txok, 0);
ath_wake_mac80211_queue(sc, txq);
@@ -2044,6 +2039,40 @@
}
}
+static void ath_tx_complete_poll_work(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc,
+ tx_complete_work.work);
+ struct ath_txq *txq;
+ int i;
+ bool needreset = false;
+
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i)) {
+ txq = &sc->tx.txq[i];
+ spin_lock_bh(&txq->axq_lock);
+ if (txq->axq_depth) {
+ if (txq->axq_tx_inprogress) {
+ needreset = true;
+ spin_unlock_bh(&txq->axq_lock);
+ break;
+ } else {
+ txq->axq_tx_inprogress = true;
+ }
+ }
+ spin_unlock_bh(&txq->axq_lock);
+ }
+
+ if (needreset) {
+ DPRINTF(sc, ATH_DBG_RESET, "tx hung, resetting the chip\n");
+ ath_reset(sc, false);
+ }
+
+ ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
+ msecs_to_jiffies(ATH_TX_COMPLETE_POLL_INT));
+}
+
+
void ath_tx_tasklet(struct ath_softc *sc)
{
@@ -2084,6 +2113,8 @@
goto err;
}
+ INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work);
+
err:
if (error != 0)
ath_tx_cleanup(sc);
@@ -2122,7 +2153,6 @@
tid->ac = &an->ac[acno];
tid->state &= ~AGGR_ADDBA_COMPLETE;
tid->state &= ~AGGR_ADDBA_PROGRESS;
- tid->addba_exchangeattempts = 0;
}
for (acno = 0, ac = &an->ac[acno];
@@ -2179,7 +2209,6 @@
tid->sched = false;
ath_tid_drain(sc, txq, tid);
tid->state &= ~AGGR_ADDBA_COMPLETE;
- tid->addba_exchangeattempts = 0;
tid->state &= ~AGGR_CLEANUP;
}
}
diff --git a/drivers/net/wireless/ath/main.c b/drivers/net/wireless/ath/main.c
index 9949b11..487193f 100644
--- a/drivers/net/wireless/ath/main.c
+++ b/drivers/net/wireless/ath/main.c
@@ -17,6 +17,42 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include "ath.h"
+
MODULE_AUTHOR("Atheros Communications");
MODULE_DESCRIPTION("Shared library for Atheros wireless LAN cards.");
MODULE_LICENSE("Dual BSD/GPL");
+
+struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
+ u32 len,
+ gfp_t gfp_mask)
+{
+ struct sk_buff *skb;
+ u32 off;
+
+ /*
+ * Cache-line-align. This is important (for the
+ * 5210 at least) as not doing so causes bogus data
+ * in rx'd frames.
+ */
+
+ /* Note: the kernel can allocate a value greater than
+ * what we ask it to give us. We really only need 4 KB as that
+ * is this hardware supports and in fact we need at least 3849
+ * as that is the MAX AMSDU size this hardware supports.
+ * Unfortunately this means we may get 8 KB here from the
+ * kernel... and that is actually what is observed on some
+ * systems :( */
+ skb = __dev_alloc_skb(len + common->cachelsz - 1, gfp_mask);
+ if (skb != NULL) {
+ off = ((unsigned long) skb->data) % common->cachelsz;
+ if (off != 0)
+ skb_reserve(skb, common->cachelsz - off);
+ } else {
+ printk(KERN_ERR "skbuff alloc of size %u failed\n", len);
+ return NULL;
+ }
+
+ return skb;
+}
+EXPORT_SYMBOL(ath_rxbuf_alloc);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index bf3d25b..077bcc1 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -586,7 +586,5 @@
default:
return NO_CTL;
}
-
- return NO_CTL;
}
EXPORT_SYMBOL(ath_regd_get_band_ctl);
diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h
index 07291cc..c1dd857 100644
--- a/drivers/net/wireless/ath/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -18,9 +18,16 @@
#define REGD_H
#include <linux/nl80211.h>
-
#include <net/cfg80211.h>
+#include "ath.h"
+
+enum ctl_group {
+ CTL_FCC = 0x10,
+ CTL_MKK = 0x40,
+ CTL_ETSI = 0x30,
+};
+
#define NO_CTL 0xff
#define SD_NO_CTL 0xE0
#define NO_CTL 0xff
@@ -47,29 +54,12 @@
#define CHANNEL_HALF_BW 10
#define CHANNEL_QUARTER_BW 5
-struct reg_dmn_pair_mapping {
- u16 regDmnEnum;
- u16 reg_5ghz_ctl;
- u16 reg_2ghz_ctl;
-};
-
struct country_code_to_enum_rd {
u16 countryCode;
u16 regDmnEnum;
const char *isoName;
};
-struct ath_regulatory {
- char alpha2[2];
- u16 country_code;
- u16 max_power_level;
- u32 tp_scale;
- u16 current_rd;
- u16 current_rd_ext;
- int16_t power_limit;
- struct reg_dmn_pair_mapping *regpair;
-};
-
enum CountryCode {
CTRY_ALBANIA = 8,
CTRY_ALGERIA = 12,
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 4d0e298..9847af7 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -154,12 +154,6 @@
DEBUG_REG_DMN = 0x01ff,
};
-enum ctl_group {
- CTL_FCC = 0x10,
- CTL_MKK = 0x40,
- CTL_ETSI = 0x30,
-};
-
/* Regpair to CTL band mapping */
static struct reg_dmn_pair_mapping regDomainPairs[] = {
/* regpair, 5 GHz CTL, 2 GHz CTL */
@@ -450,7 +444,7 @@
{CTRY_SWITZERLAND, ETSI1_WORLD, "CH"},
{CTRY_SYRIA, NULL1_WORLD, "SY"},
{CTRY_TAIWAN, APL3_FCCA, "TW"},
- {CTRY_THAILAND, NULL1_WORLD, "TH"},
+ {CTRY_THAILAND, FCC3_WORLD, "TH"},
{CTRY_TRINIDAD_Y_TOBAGO, ETSI4_WORLD, "TT"},
{CTRY_TUNISIA, ETSI3_WORLD, "TN"},
{CTRY_TURKEY, ETSI3_WORLD, "TR"},
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 291a94b..a3b36b3 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -781,7 +781,7 @@
priv->tx_free_mem -= len;
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
static const u8 SNAP_RFC1024[6] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
struct atmel_private *priv = netdev_priv(dev);
@@ -793,13 +793,13 @@
!(*priv->present_callback)(priv->card)) {
dev->stats.tx_errors++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (priv->station_state != STATION_STATE_READY) {
dev->stats.tx_errors++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* first ensure the timer func cannot run */
@@ -856,7 +856,7 @@
spin_unlock_bh(&priv->timerlock);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void atmel_transmit_management_frame(struct atmel_private *priv,
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 67f564e..83e3813 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -42,8 +42,8 @@
default y
config B43_PCMCIA
- bool "Broadcom 43xx PCMCIA device support (EXPERIMENTAL)"
- depends on B43 && SSB_PCMCIAHOST_POSSIBLE && EXPERIMENTAL
+ bool "Broadcom 43xx PCMCIA device support"
+ depends on B43 && SSB_PCMCIAHOST_POSSIBLE
select SSB_PCMCIAHOST
---help---
Broadcom 43xx PCMCIA device support.
@@ -80,16 +80,14 @@
SAY N.
config B43_PHY_LP
- bool "IEEE 802.11g LP-PHY support (BROKEN)"
- depends on B43 && EXPERIMENTAL && BROKEN
+ bool "Support for low-power (LP-PHY) devices (EXPERIMENTAL)"
+ depends on B43 && EXPERIMENTAL
+ default y
---help---
Support for the LP-PHY.
- The LP-PHY is an IEEE 802.11g based PHY built into some notebooks
- and embedded devices.
-
- THIS IS BROKEN AND DOES NOT WORK YET.
-
- SAY N.
+ The LP-PHY is a low-power PHY built into some notebooks
+ and embedded devices. It supports 802.11a/g
+ (802.11a support is optional, and currently disabled).
# This config option automatically enables b43 LEDS support,
# if it's possible.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 4044806..09cfe68 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -142,6 +142,17 @@
#define B43_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
#define B43_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
+/* SPROM boardflags_hi values */
+#define B43_BFH_NOPA 0x0001 /* has no PA */
+#define B43_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */
+#define B43_BFH_PAREF 0x0004 /* uses the PARef LDO */
+#define B43_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared
+ * with bluetooth */
+#define B43_BFH_PHASESHIFT 0x0010 /* can support phase shifter */
+#define B43_BFH_BUCKBOOST 0x0020 /* has buck/booster */
+#define B43_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna
+ * with bluetooth */
+
/* GPIO register offset, in both ChipCommon and PCI core. */
#define B43_GPIO_CONTROL 0x6c
@@ -482,6 +493,10 @@
/* Max size of a security key */
#define B43_SEC_KEYSIZE 16
+/* Max number of group keys */
+#define B43_NR_GROUP_KEYS 4
+/* Max number of pairwise keys */
+#define B43_NR_PAIRWISE_KEYS 50
/* Security algorithms. */
enum {
B43_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
@@ -601,6 +616,12 @@
/* Pointer to the ieee80211 hardware data structure */
struct ieee80211_hw *hw;
+ /* Global driver mutex. Every operation must run with this mutex locked. */
+ struct mutex mutex;
+ /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+ * handler, only. This basically is just the IRQ mask register. */
+ spinlock_t hardirq_lock;
+
/* The number of queues that were registered with the mac80211 subsystem
* initially. This is a backup copy of hw->queues in case hw->queues has
* to be dynamically lowered at runtime (Firmware does not support QoS).
@@ -608,16 +629,12 @@
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
- struct mutex mutex;
- spinlock_t irq_lock;
/* R/W lock for data transmission.
* Transmissions on 2+ queues can run concurrently, but somebody else
* might sync with TX by write_lock_irqsave()'ing. */
rwlock_t tx_lock;
/* Lock for LEDs access. */
spinlock_t leds_lock;
- /* Lock for SHM access. */
- spinlock_t shm_lock;
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
@@ -628,7 +645,7 @@
u8 mac_addr[ETH_ALEN];
/* Current BSSID */
u8 bssid[ETH_ALEN];
- /* Interface type. (IEEE80211_IF_TYPE_XXX) */
+ /* Interface type. (NL80211_IFTYPE_XXX) */
int if_type;
/* Is the card operating in AP, STA or IBSS mode? */
bool operating;
@@ -650,8 +667,7 @@
bool radiotap_enabled;
bool radio_enabled;
- /* The beacon we are currently using (AP or IBSS mode).
- * This beacon stuff is protected by the irq_lock. */
+ /* The beacon we are currently using (AP or IBSS mode). */
struct sk_buff *current_beacon;
bool beacon0_uploaded;
bool beacon1_uploaded;
@@ -665,6 +681,11 @@
* This is scheduled when we determine that the actual TX output
* power doesn't match what we want. */
struct work_struct txpower_adjust_work;
+
+ /* Packet transmit work */
+ struct work_struct tx_work;
+ /* Queue of packets to be transmitted. */
+ struct sk_buff_head tx_queue;
};
/* The type of the firmware file. */
@@ -739,14 +760,6 @@
smp_wmb(); \
} while (0)
-/* XXX--- HOW LOCKING WORKS IN B43 ---XXX
- *
- * You should always acquire both, wl->mutex and wl->irq_lock unless:
- * - You don't need to acquire wl->irq_lock, if the interface is stopped.
- * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
- * and packet TX path (and _ONLY_ there.)
- */
-
/* Data structure for one wireless device (802.11 core) */
struct b43_wldev {
struct ssb_device *dev;
@@ -792,14 +805,12 @@
u32 dma_reason[6];
/* The currently active generic-interrupt mask. */
u32 irq_mask;
+
/* Link Quality calculation context. */
struct b43_noise_calculation noisecalc;
/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
int mac_suspended;
- /* Interrupt Service Routine tasklet (bottom-half) */
- struct tasklet_struct isr_tasklet;
-
/* Periodic tasks */
struct delayed_work periodic_work;
unsigned int periodic_state;
@@ -808,8 +819,7 @@
/* encryption/decryption */
u16 ktp; /* Key table pointer */
- u8 max_nr_keys;
- struct b43_key key[58];
+ struct b43_key key[B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS];
/* Firmware data */
struct b43_firmware fw;
@@ -834,7 +844,7 @@
return ssb_get_drvdata(ssb_dev);
}
-/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
+/* Is the device operating in a specified mode (NL80211_IFTYPE_XXX). */
static inline int b43_is_mode(struct b43_wl *wl, int type)
{
return (wl->operating && wl->if_type == type);
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 45e3d6a..8f64943 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -46,8 +46,6 @@
struct file_operations fops;
/* Offset of struct b43_dfs_file in struct b43_dfsentry */
size_t file_struct_offset;
- /* Take wl->irq_lock before calling read/write? */
- bool take_irqlock;
};
static inline
@@ -127,7 +125,6 @@
unsigned int routing, addr, mask, set;
u16 val;
int res;
- unsigned long flags;
res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X",
&routing, &addr, &mask, &set);
@@ -144,15 +141,13 @@
if ((mask > 0xFFFF) || (set > 0xFFFF))
return -E2BIG;
- spin_lock_irqsave(&dev->wl->shm_lock, flags);
if (mask == 0)
val = 0;
else
- val = __b43_shm_read16(dev, routing, addr);
+ val = b43_shm_read16(dev, routing, addr);
val &= mask;
val |= set;
- __b43_shm_write16(dev, routing, addr, val);
- spin_unlock_irqrestore(&dev->wl->shm_lock, flags);
+ b43_shm_write16(dev, routing, addr, val);
return 0;
}
@@ -206,7 +201,6 @@
unsigned int routing, addr, mask, set;
u32 val;
int res;
- unsigned long flags;
res = sscanf(buf, "0x%X 0x%X 0x%X 0x%X",
&routing, &addr, &mask, &set);
@@ -223,15 +217,13 @@
if ((mask > 0xFFFFFFFF) || (set > 0xFFFFFFFF))
return -E2BIG;
- spin_lock_irqsave(&dev->wl->shm_lock, flags);
if (mask == 0)
val = 0;
else
- val = __b43_shm_read32(dev, routing, addr);
+ val = b43_shm_read32(dev, routing, addr);
val &= mask;
val |= set;
- __b43_shm_write32(dev, routing, addr, val);
- spin_unlock_irqrestore(&dev->wl->shm_lock, flags);
+ b43_shm_write32(dev, routing, addr, val);
return 0;
}
@@ -372,14 +364,12 @@
{
struct b43_txstatus_log *log = &dev->dfsentry->txstatlog;
ssize_t count = 0;
- unsigned long flags;
int i, idx;
struct b43_txstatus *stat;
- spin_lock_irqsave(&log->lock, flags);
if (log->end < 0) {
fappend("Nothing transmitted, yet\n");
- goto out_unlock;
+ goto out;
}
fappend("b43 TX status reports:\n\n"
"index | cookie | seq | phy_stat | frame_count | "
@@ -409,13 +399,11 @@
break;
i++;
}
-out_unlock:
- spin_unlock_irqrestore(&log->lock, flags);
+out:
return count;
}
-/* wl->irq_lock is locked */
static int restart_write_file(struct b43_wldev *dev,
const char *buf, size_t count)
{
@@ -556,12 +544,7 @@
goto out_unlock;
}
memset(buf, 0, bufsize);
- if (dfops->take_irqlock) {
- spin_lock_irq(&dev->wl->irq_lock);
- ret = dfops->read(dev, buf, bufsize);
- spin_unlock_irq(&dev->wl->irq_lock);
- } else
- ret = dfops->read(dev, buf, bufsize);
+ ret = dfops->read(dev, buf, bufsize);
if (ret <= 0) {
free_pages((unsigned long)buf, buforder);
err = ret;
@@ -623,12 +606,7 @@
err = -EFAULT;
goto out_freepage;
}
- if (dfops->take_irqlock) {
- spin_lock_irq(&dev->wl->irq_lock);
- err = dfops->write(dev, buf, count);
- spin_unlock_irq(&dev->wl->irq_lock);
- } else
- err = dfops->write(dev, buf, count);
+ err = dfops->write(dev, buf, count);
if (err)
goto out_freepage;
@@ -641,7 +619,7 @@
}
-#define B43_DEBUGFS_FOPS(name, _read, _write, _take_irqlock) \
+#define B43_DEBUGFS_FOPS(name, _read, _write) \
static struct b43_debugfs_fops fops_##name = { \
.read = _read, \
.write = _write, \
@@ -652,20 +630,19 @@
}, \
.file_struct_offset = offsetof(struct b43_dfsentry, \
file_##name), \
- .take_irqlock = _take_irqlock, \
}
-B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file, 1);
-B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file, 1);
-B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file, 1);
-B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file, 1);
-B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file, 1);
-B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file, 1);
-B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1);
-B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1);
-B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0);
-B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1);
-B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0);
+B43_DEBUGFS_FOPS(shm16read, shm16read__read_file, shm16read__write_file);
+B43_DEBUGFS_FOPS(shm16write, NULL, shm16write__write_file);
+B43_DEBUGFS_FOPS(shm32read, shm32read__read_file, shm32read__write_file);
+B43_DEBUGFS_FOPS(shm32write, NULL, shm32write__write_file);
+B43_DEBUGFS_FOPS(mmio16read, mmio16read__read_file, mmio16read__write_file);
+B43_DEBUGFS_FOPS(mmio16write, NULL, mmio16write__write_file);
+B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file);
+B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file);
+B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL);
+B43_DEBUGFS_FOPS(restart, NULL, restart_write_file);
+B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL);
bool b43_debug(struct b43_wldev *dev, enum b43_dyndbg feature)
@@ -738,7 +715,6 @@
return;
}
log->end = -1;
- spin_lock_init(&log->lock);
dev->dfsentry = e;
@@ -822,7 +798,6 @@
kfree(e);
}
-/* Called with IRQs disabled. */
void b43_debugfs_log_txstat(struct b43_wldev *dev,
const struct b43_txstatus *status)
{
@@ -834,14 +809,12 @@
if (!e)
return;
log = &e->txstatlog;
- spin_lock(&log->lock); /* IRQs are already disabled. */
i = log->end + 1;
if (i == B43_NR_LOGGED_TXSTATUS)
i = 0;
log->end = i;
cur = &(log->log[i]);
memcpy(cur, status, sizeof(*cur));
- spin_unlock(&log->lock);
}
void b43_debugfs_init(void)
diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index b9d4de4..e47b4b4 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -23,9 +23,10 @@
#define B43_NR_LOGGED_TXSTATUS 100
struct b43_txstatus_log {
+ /* This structure is protected by wl->mutex */
+
struct b43_txstatus *log;
int end;
- spinlock_t lock;
};
struct b43_dfs_file {
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 7964cc3..a467ee2 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -856,7 +856,6 @@
} else
B43_WARN_ON(1);
}
- spin_lock_init(&ring->lock);
#ifdef CONFIG_B43_DEBUG
ring->last_injected_overflow = jiffies;
#endif
@@ -1188,7 +1187,7 @@
header = &(ring->txhdr_cache[(slot / TX_SLOTS_PER_FRAME) * hdrsize]);
cookie = generate_cookie(ring, slot);
err = b43_generate_txhdr(ring->dev, header,
- skb->data, skb->len, info, cookie);
+ skb, info, cookie);
if (unlikely(err)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
@@ -1315,7 +1314,6 @@
struct b43_dmaring *ring;
struct ieee80211_hdr *hdr;
int err = 0;
- unsigned long flags;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
hdr = (struct ieee80211_hdr *)skb->data;
@@ -1331,18 +1329,25 @@
dev, skb_get_queue_mapping(skb));
}
- spin_lock_irqsave(&ring->lock, flags);
-
B43_WARN_ON(!ring->tx);
- /* Check if the queue was stopped in mac80211,
- * but we got called nevertheless.
- * That would be a mac80211 bug. */
- B43_WARN_ON(ring->stopped);
- if (unlikely(free_slots(ring) < TX_SLOTS_PER_FRAME)) {
- b43warn(dev->wl, "DMA queue overflow\n");
+ if (unlikely(ring->stopped)) {
+ /* We get here only because of a bug in mac80211.
+ * Because of a race, one packet may be queued after
+ * the queue is stopped, thus we got called when we shouldn't.
+ * For now, just refuse the transmit. */
+ if (b43_debug(dev, B43_DBG_DMAVERBOSE))
+ b43err(dev->wl, "Packet after queue stopped\n");
err = -ENOSPC;
- goto out_unlock;
+ goto out;
+ }
+
+ if (unlikely(WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME))) {
+ /* If we get here, we have a real error with the queue
+ * full, but queues not stopped. */
+ b43err(dev->wl, "DMA queue overflow\n");
+ err = -ENOSPC;
+ goto out;
}
/* Assign the queue number to the ring (if not already done before)
@@ -1356,11 +1361,11 @@
* anymore and must not transmit it unencrypted. */
dev_kfree_skb_any(skb);
err = 0;
- goto out_unlock;
+ goto out;
}
if (unlikely(err)) {
b43err(dev->wl, "DMA tx mapping failure\n");
- goto out_unlock;
+ goto out;
}
ring->nr_tx_packets++;
if ((free_slots(ring) < TX_SLOTS_PER_FRAME) ||
@@ -1372,13 +1377,11 @@
b43dbg(dev->wl, "Stopped TX ring %d\n", ring->index);
}
}
-out_unlock:
- spin_unlock_irqrestore(&ring->lock, flags);
+out:
return err;
}
-/* Called with IRQs disabled. */
void b43_dma_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status)
{
@@ -1393,8 +1396,6 @@
if (unlikely(!ring))
return;
- spin_lock(&ring->lock); /* IRQs are already disabled. */
-
B43_WARN_ON(!ring->tx);
ops = ring->ops;
while (1) {
@@ -1453,8 +1454,6 @@
b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
}
}
-
- spin_unlock(&ring->lock);
}
void b43_dma_get_tx_stats(struct b43_wldev *dev,
@@ -1462,17 +1461,14 @@
{
const int nr_queues = dev->wl->hw->queues;
struct b43_dmaring *ring;
- unsigned long flags;
int i;
for (i = 0; i < nr_queues; i++) {
ring = select_ring_by_priority(dev, i);
- spin_lock_irqsave(&ring->lock, flags);
stats[i].len = ring->used_slots / TX_SLOTS_PER_FRAME;
stats[i].limit = ring->nr_slots / TX_SLOTS_PER_FRAME;
stats[i].count = ring->nr_tx_packets;
- spin_unlock_irqrestore(&ring->lock, flags);
}
}
@@ -1583,22 +1579,14 @@
static void b43_dma_tx_suspend_ring(struct b43_dmaring *ring)
{
- unsigned long flags;
-
- spin_lock_irqsave(&ring->lock, flags);
B43_WARN_ON(!ring->tx);
ring->ops->tx_suspend(ring);
- spin_unlock_irqrestore(&ring->lock, flags);
}
static void b43_dma_tx_resume_ring(struct b43_dmaring *ring)
{
- unsigned long flags;
-
- spin_lock_irqsave(&ring->lock, flags);
B43_WARN_ON(!ring->tx);
ring->ops->tx_resume(ring);
- spin_unlock_irqrestore(&ring->lock, flags);
}
void b43_dma_tx_suspend(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index 05dde64..f0b0838 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -2,7 +2,6 @@
#define B43_DMA_H_
#include <linux/ieee80211.h>
-#include <linux/spinlock.h>
#include "b43.h"
@@ -244,8 +243,6 @@
/* The QOS priority assigned to this ring. Only used for TX rings.
* This is the mac80211 "queue" value. */
u8 queue_prio;
- /* Lock, only used for TX. */
- spinlock_t lock;
struct b43_wldev *dev;
#ifdef CONFIG_B43_DEBUG
/* Maximum number of used slots. */
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 22d0fbd..976104f 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -477,7 +477,7 @@
} else
b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802);
if (phy->rev >= 2)
- b43_dummy_transmission(dev);
+ b43_dummy_transmission(dev, false, true);
b43_gphy_channel_switch(dev, 6, 0);
b43_radio_read16(dev, 0x51); /* dummy read */
if (phy->type == B43_PHYTYPE_G)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e71c8d9..7a9a3fa 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -58,6 +58,7 @@
MODULE_AUTHOR("Martin Langer");
MODULE_AUTHOR("Stefano Brivio");
MODULE_AUTHOR("Michael Buesch");
+MODULE_AUTHOR("Gábor Stefanik");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(B43_SUPPORTED_FIRMWARE_ID);
@@ -80,13 +81,17 @@
module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+static int modparam_hwtkip;
+module_param_named(hwtkip, modparam_hwtkip, int, 0444);
+MODULE_PARM_DESC(hwtkip, "Enable hardware tkip.");
+
static int modparam_qos = 1;
module_param_named(qos, modparam_qos, int, 0444);
MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
static int modparam_btcoex = 1;
module_param_named(btcoex, modparam_btcoex, int, 0444);
-MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistance (default on)");
+MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistence (default on)");
int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
module_param_named(verbose, b43_modparam_verbose, int, 0644);
@@ -286,7 +291,7 @@
static void b43_wireless_core_exit(struct b43_wldev *dev);
static int b43_wireless_core_init(struct b43_wldev *dev);
-static void b43_wireless_core_stop(struct b43_wldev *dev);
+static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
static int b43_wireless_core_start(struct b43_wldev *dev);
static int b43_ratelimit(struct b43_wl *wl)
@@ -385,7 +390,7 @@
b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
}
-u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
+u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
{
u32 ret;
@@ -395,9 +400,8 @@
/* Unaligned access */
b43_shm_control_word(dev, routing, offset >> 2);
ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
- ret <<= 16;
b43_shm_control_word(dev, routing, (offset >> 2) + 1);
- ret |= b43_read16(dev, B43_MMIO_SHM_DATA);
+ ret |= ((u32)b43_read16(dev, B43_MMIO_SHM_DATA)) << 16;
goto out;
}
@@ -409,20 +413,7 @@
return ret;
}
-u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
-{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
- u32 ret;
-
- spin_lock_irqsave(&wl->shm_lock, flags);
- ret = __b43_shm_read32(dev, routing, offset);
- spin_unlock_irqrestore(&wl->shm_lock, flags);
-
- return ret;
-}
-
-u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
+u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
{
u16 ret;
@@ -443,20 +434,7 @@
return ret;
}
-u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
-{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
- u16 ret;
-
- spin_lock_irqsave(&wl->shm_lock, flags);
- ret = __b43_shm_read16(dev, routing, offset);
- spin_unlock_irqrestore(&wl->shm_lock, flags);
-
- return ret;
-}
-
-void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
+void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
{
if (routing == B43_SHM_SHARED) {
B43_WARN_ON(offset & 0x0001);
@@ -464,9 +442,10 @@
/* Unaligned access */
b43_shm_control_word(dev, routing, offset >> 2);
b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
- (value >> 16) & 0xffff);
+ value & 0xFFFF);
b43_shm_control_word(dev, routing, (offset >> 2) + 1);
- b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
+ b43_write16(dev, B43_MMIO_SHM_DATA,
+ (value >> 16) & 0xFFFF);
return;
}
offset >>= 2;
@@ -475,17 +454,7 @@
b43_write32(dev, B43_MMIO_SHM_DATA, value);
}
-void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
-{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
-
- spin_lock_irqsave(&wl->shm_lock, flags);
- __b43_shm_write32(dev, routing, offset, value);
- spin_unlock_irqrestore(&wl->shm_lock, flags);
-}
-
-void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
{
if (routing == B43_SHM_SHARED) {
B43_WARN_ON(offset & 0x0001);
@@ -501,16 +470,6 @@
b43_write16(dev, B43_MMIO_SHM_DATA, value);
}
-void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
-{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
-
- spin_lock_irqsave(&wl->shm_lock, flags);
- __b43_shm_write16(dev, routing, offset, value);
- spin_unlock_irqrestore(&wl->shm_lock, flags);
-}
-
/* Read HostFlags */
u64 b43_hf_read(struct b43_wldev *dev)
{
@@ -680,22 +639,11 @@
b43_set_slot_time(dev, 20);
}
-/* Synchronize IRQ top- and bottom-half.
- * IRQs must be masked before calling this.
- * This must not be called with the irq_lock held.
- */
-static void b43_synchronize_irq(struct b43_wldev *dev)
-{
- synchronize_irq(dev->dev->irq);
- tasklet_kill(&dev->isr_tasklet);
-}
-
/* DummyTransmission function, as documented on
- * http://bcm-specs.sipsolutions.net/DummyTransmission
+ * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission
*/
-void b43_dummy_transmission(struct b43_wldev *dev)
+void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
{
- struct b43_wl *wl = dev->wl;
struct b43_phy *phy = &dev->phy;
unsigned int i, max_loop;
u16 value;
@@ -707,41 +655,46 @@
0x00000000,
};
- switch (phy->type) {
- case B43_PHYTYPE_A:
+ if (ofdm) {
max_loop = 0x1E;
buffer[0] = 0x000201CC;
- break;
- case B43_PHYTYPE_B:
- case B43_PHYTYPE_G:
+ } else {
max_loop = 0xFA;
buffer[0] = 0x000B846E;
- break;
- default:
- B43_WARN_ON(1);
- return;
}
- spin_lock_irq(&wl->irq_lock);
- write_lock(&wl->tx_lock);
-
for (i = 0; i < 5; i++)
b43_ram_write(dev, i * 4, buffer[i]);
- /* Commit writes */
- b43_read32(dev, B43_MMIO_MACCTL);
-
b43_write16(dev, 0x0568, 0x0000);
- b43_write16(dev, 0x07C0, 0x0000);
- value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0);
+ if (dev->dev->id.revision < 11)
+ b43_write16(dev, 0x07C0, 0x0000);
+ else
+ b43_write16(dev, 0x07C0, 0x0100);
+ value = (ofdm ? 0x41 : 0x40);
b43_write16(dev, 0x050C, value);
+ if ((phy->type == B43_PHYTYPE_N) || (phy->type == B43_PHYTYPE_LP))
+ b43_write16(dev, 0x0514, 0x1A02);
b43_write16(dev, 0x0508, 0x0000);
b43_write16(dev, 0x050A, 0x0000);
b43_write16(dev, 0x054C, 0x0000);
b43_write16(dev, 0x056A, 0x0014);
b43_write16(dev, 0x0568, 0x0826);
b43_write16(dev, 0x0500, 0x0000);
- b43_write16(dev, 0x0502, 0x0030);
+ if (!pa_on && (phy->type == B43_PHYTYPE_N)) {
+ //SPEC TODO
+ }
+
+ switch (phy->type) {
+ case B43_PHYTYPE_N:
+ b43_write16(dev, 0x0502, 0x00D0);
+ break;
+ case B43_PHYTYPE_LP:
+ b43_write16(dev, 0x0502, 0x0050);
+ break;
+ default:
+ b43_write16(dev, 0x0502, 0x0030);
+ }
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43_radio_write16(dev, 0x0051, 0x0017);
@@ -765,9 +718,6 @@
}
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43_radio_write16(dev, 0x0051, 0x0037);
-
- write_unlock(&wl->tx_lock);
- spin_unlock_irq(&wl->irq_lock);
}
static void key_write(struct b43_wldev *dev,
@@ -796,18 +746,19 @@
static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr)
{
u32 addrtmp[2] = { 0, 0, };
- u8 per_sta_keys_start = 8;
+ u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
if (b43_new_kidx_api(dev))
- per_sta_keys_start = 4;
+ pairwise_keys_start = B43_NR_GROUP_KEYS;
- B43_WARN_ON(index < per_sta_keys_start);
- /* We have two default TX keys and possibly two default RX keys.
+ B43_WARN_ON(index < pairwise_keys_start);
+ /* We have four default TX keys and possibly four default RX keys.
* Physical mac 0 is mapped to physical key 4 or 8, depending
* on the firmware version.
* So we must adjust the index here.
*/
- index -= per_sta_keys_start;
+ index -= pairwise_keys_start;
+ B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
if (addr) {
addrtmp[0] = addr[0];
@@ -818,27 +769,90 @@
addrtmp[1] |= ((u32) (addr[5]) << 8);
}
- if (dev->dev->id.revision >= 5) {
- /* Receive match transmitter address mechanism */
- b43_shm_write32(dev, B43_SHM_RCMTA,
- (index * 2) + 0, addrtmp[0]);
- b43_shm_write16(dev, B43_SHM_RCMTA,
- (index * 2) + 1, addrtmp[1]);
- } else {
- /* RXE (Receive Engine) and
- * PSM (Programmable State Machine) mechanism
- */
- if (index < 8) {
- /* TODO write to RCM 16, 19, 22 and 25 */
- } else {
- b43_shm_write32(dev, B43_SHM_SHARED,
- B43_SHM_SH_PSM + (index * 6) + 0,
- addrtmp[0]);
- b43_shm_write16(dev, B43_SHM_SHARED,
- B43_SHM_SH_PSM + (index * 6) + 4,
- addrtmp[1]);
- }
+ /* Receive match transmitter address (RCMTA) mechanism */
+ b43_shm_write32(dev, B43_SHM_RCMTA,
+ (index * 2) + 0, addrtmp[0]);
+ b43_shm_write16(dev, B43_SHM_RCMTA,
+ (index * 2) + 1, addrtmp[1]);
+}
+
+/* The ucode will use phase1 key with TEK key to decrypt rx packets.
+ * When a packet is received, the iv32 is checked.
+ * - if it doesn't the packet is returned without modification (and software
+ * decryption can be done). That's what happen when iv16 wrap.
+ * - if it does, the rc4 key is computed, and decryption is tried.
+ * Either it will success and B43_RX_MAC_DEC is returned,
+ * either it fails and B43_RX_MAC_DEC|B43_RX_MAC_DECERR is returned
+ * and the packet is not usable (it got modified by the ucode).
+ * So in order to never have B43_RX_MAC_DECERR, we should provide
+ * a iv32 and phase1key that match. Because we drop packets in case of
+ * B43_RX_MAC_DECERR, if we have a correct iv32 but a wrong phase1key, all
+ * packets will be lost without higher layer knowing (ie no resync possible
+ * until next wrap).
+ *
+ * NOTE : this should support 50 key like RCMTA because
+ * (B43_SHM_SH_KEYIDXBLOCK - B43_SHM_SH_TKIPTSCTTAK)/14 = 50
+ */
+static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
+ u16 *phase1key)
+{
+ unsigned int i;
+ u32 offset;
+ u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
+
+ if (!modparam_hwtkip)
+ return;
+
+ if (b43_new_kidx_api(dev))
+ pairwise_keys_start = B43_NR_GROUP_KEYS;
+
+ B43_WARN_ON(index < pairwise_keys_start);
+ /* We have four default TX keys and possibly four default RX keys.
+ * Physical mac 0 is mapped to physical key 4 or 8, depending
+ * on the firmware version.
+ * So we must adjust the index here.
+ */
+ index -= pairwise_keys_start;
+ B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
+
+ if (b43_debug(dev, B43_DBG_KEYS)) {
+ b43dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n",
+ index, iv32);
}
+ /* Write the key to the RX tkip shared mem */
+ offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4);
+ for (i = 0; i < 10; i += 2) {
+ b43_shm_write16(dev, B43_SHM_SHARED, offset + i,
+ phase1key ? phase1key[i / 2] : 0);
+ }
+ b43_shm_write16(dev, B43_SHM_SHARED, offset + i, iv32);
+ b43_shm_write16(dev, B43_SHM_SHARED, offset + i + 2, iv32 >> 16);
+}
+
+static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
+ struct ieee80211_key_conf *keyconf, const u8 *addr,
+ u32 iv32, u16 *phase1key)
+{
+ struct b43_wl *wl = hw_to_b43_wl(hw);
+ struct b43_wldev *dev;
+ int index = keyconf->hw_key_idx;
+
+ if (B43_WARN_ON(!modparam_hwtkip))
+ return;
+
+ mutex_lock(&wl->mutex);
+
+ dev = wl->current_dev;
+ if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
+ goto out_unlock;
+
+ keymac_write(dev, index, NULL); /* First zero out mac to avoid race */
+
+ rx_tkip_phase1_write(dev, index, iv32, phase1key);
+ keymac_write(dev, index, addr);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
}
static void do_key_write(struct b43_wldev *dev,
@@ -846,20 +860,33 @@
const u8 *key, size_t key_len, const u8 *mac_addr)
{
u8 buf[B43_SEC_KEYSIZE] = { 0, };
- u8 per_sta_keys_start = 8;
+ u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
if (b43_new_kidx_api(dev))
- per_sta_keys_start = 4;
+ pairwise_keys_start = B43_NR_GROUP_KEYS;
- B43_WARN_ON(index >= dev->max_nr_keys);
+ B43_WARN_ON(index >= ARRAY_SIZE(dev->key));
B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
- if (index >= per_sta_keys_start)
+ if (index >= pairwise_keys_start)
keymac_write(dev, index, NULL); /* First zero out mac. */
+ if (algorithm == B43_SEC_ALGO_TKIP) {
+ /*
+ * We should provide an initial iv32, phase1key pair.
+ * We could start with iv32=0 and compute the corresponding
+ * phase1key, but this means calling ieee80211_get_tkip_key
+ * with a fake skb (or export other tkip function).
+ * Because we are lazy we hope iv32 won't start with
+ * 0xffffffff and let's b43_op_update_tkip_key provide a
+ * correct pair.
+ */
+ rx_tkip_phase1_write(dev, index, 0xffffffff, (u16*)buf);
+ } else if (index >= pairwise_keys_start) /* clear it */
+ rx_tkip_phase1_write(dev, index, 0, NULL);
if (key)
memcpy(buf, key, key_len);
key_write(dev, index, algorithm, buf);
- if (index >= per_sta_keys_start)
+ if (index >= pairwise_keys_start)
keymac_write(dev, index, mac_addr);
dev->key[index].algorithm = algorithm;
@@ -872,21 +899,33 @@
struct ieee80211_key_conf *keyconf)
{
int i;
- int sta_keys_start;
+ int pairwise_keys_start;
+ /* For ALG_TKIP the key is encoded as a 256-bit (32 byte) data block:
+ * - Temporal Encryption Key (128 bits)
+ * - Temporal Authenticator Tx MIC Key (64 bits)
+ * - Temporal Authenticator Rx MIC Key (64 bits)
+ *
+ * Hardware only store TEK
+ */
+ if (algorithm == B43_SEC_ALGO_TKIP && key_len == 32)
+ key_len = 16;
if (key_len > B43_SEC_KEYSIZE)
return -EINVAL;
- for (i = 0; i < dev->max_nr_keys; i++) {
+ for (i = 0; i < ARRAY_SIZE(dev->key); i++) {
/* Check that we don't already have this key. */
B43_WARN_ON(dev->key[i].keyconf == keyconf);
}
if (index < 0) {
/* Pairwise key. Get an empty slot for the key. */
if (b43_new_kidx_api(dev))
- sta_keys_start = 4;
+ pairwise_keys_start = B43_NR_GROUP_KEYS;
else
- sta_keys_start = 8;
- for (i = sta_keys_start; i < dev->max_nr_keys; i++) {
+ pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
+ for (i = pairwise_keys_start;
+ i < pairwise_keys_start + B43_NR_PAIRWISE_KEYS;
+ i++) {
+ B43_WARN_ON(i >= ARRAY_SIZE(dev->key));
if (!dev->key[i].keyconf) {
/* found empty */
index = i;
@@ -914,7 +953,7 @@
static int b43_key_clear(struct b43_wldev *dev, int index)
{
- if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys)))
+ if (B43_WARN_ON((index < 0) || (index >= ARRAY_SIZE(dev->key))))
return -EINVAL;
do_key_write(dev, index, B43_SEC_ALGO_NONE,
NULL, B43_SEC_KEYSIZE, NULL);
@@ -929,16 +968,19 @@
static void b43_clear_keys(struct b43_wldev *dev)
{
- int i;
+ int i, count;
- for (i = 0; i < dev->max_nr_keys; i++)
+ if (b43_new_kidx_api(dev))
+ count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
+ else
+ count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
+ for (i = 0; i < count; i++)
b43_key_clear(dev, i);
}
static void b43_dump_keymemory(struct b43_wldev *dev)
{
- unsigned int i, index, offset;
- DECLARE_MAC_BUF(macbuf);
+ unsigned int i, index, count, offset, pairwise_keys_start;
u8 mac[ETH_ALEN];
u16 algo;
u32 rcmta0;
@@ -952,7 +994,14 @@
hf = b43_hf_read(dev);
b43dbg(dev->wl, "Hardware key memory dump: USEDEFKEYS=%u\n",
!!(hf & B43_HF_USEDEFKEYS));
- for (index = 0; index < dev->max_nr_keys; index++) {
+ if (b43_new_kidx_api(dev)) {
+ pairwise_keys_start = B43_NR_GROUP_KEYS;
+ count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
+ } else {
+ pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
+ count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
+ }
+ for (index = 0; index < count; index++) {
key = &(dev->key[index]);
printk(KERN_DEBUG "Key slot %02u: %s",
index, (key->keyconf == NULL) ? " " : "*");
@@ -966,15 +1015,22 @@
B43_SHM_SH_KEYIDXBLOCK + (index * 2));
printk(" Algo: %04X/%02X", algo, key->algorithm);
- if (index >= 4) {
+ if (index >= pairwise_keys_start) {
+ if (key->algorithm == B43_SEC_ALGO_TKIP) {
+ printk(" TKIP: ");
+ offset = B43_SHM_SH_TKIPTSCTTAK + (index - 4) * (10 + 4);
+ for (i = 0; i < 14; i += 2) {
+ u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
+ printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
+ }
+ }
rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA,
- ((index - 4) * 2) + 0);
+ ((index - pairwise_keys_start) * 2) + 0);
rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA,
- ((index - 4) * 2) + 1);
+ ((index - pairwise_keys_start) * 2) + 1);
*((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0);
*((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1);
- printk(" MAC: %s",
- print_mac(macbuf, mac));
+ printk(" MAC: %pM", mac);
} else
printk(" DEFAULT KEY");
printk("\n");
@@ -1338,7 +1394,8 @@
return B43_TXH_PHY_ANT2;
case B43_ANTENNA3:
return B43_TXH_PHY_ANT3;
- case B43_ANTENNA_AUTO:
+ case B43_ANTENNA_AUTO0:
+ case B43_ANTENNA_AUTO1:
return B43_TXH_PHY_ANT01AUTO;
}
B43_WARN_ON(1);
@@ -1431,113 +1488,6 @@
b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
}
-static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
- u16 shm_offset, u16 size,
- struct ieee80211_rate *rate)
-{
- struct b43_plcp_hdr4 plcp;
- u32 tmp;
- __le16 dur;
-
- plcp.data = 0;
- b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
- dur = ieee80211_generic_frame_duration(dev->wl->hw,
- dev->wl->vif, size,
- rate);
- /* Write PLCP in two parts and timing for packet transfer */
- tmp = le32_to_cpu(plcp.data);
- b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
- b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16);
- b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur));
-}
-
-/* Instead of using custom probe response template, this function
- * just patches custom beacon template by:
- * 1) Changing packet type
- * 2) Patching duration field
- * 3) Stripping TIM
- */
-static const u8 *b43_generate_probe_resp(struct b43_wldev *dev,
- u16 *dest_size,
- struct ieee80211_rate *rate)
-{
- const u8 *src_data;
- u8 *dest_data;
- u16 src_size, elem_size, src_pos, dest_pos;
- __le16 dur;
- struct ieee80211_hdr *hdr;
- size_t ie_start;
-
- src_size = dev->wl->current_beacon->len;
- src_data = (const u8 *)dev->wl->current_beacon->data;
-
- /* Get the start offset of the variable IEs in the packet. */
- ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
- B43_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt, u.beacon.variable));
-
- if (B43_WARN_ON(src_size < ie_start))
- return NULL;
-
- dest_data = kmalloc(src_size, GFP_ATOMIC);
- if (unlikely(!dest_data))
- return NULL;
-
- /* Copy the static data and all Information Elements, except the TIM. */
- memcpy(dest_data, src_data, ie_start);
- src_pos = ie_start;
- dest_pos = ie_start;
- for ( ; src_pos < src_size - 2; src_pos += elem_size) {
- elem_size = src_data[src_pos + 1] + 2;
- if (src_data[src_pos] == 5) {
- /* This is the TIM. */
- continue;
- }
- memcpy(dest_data + dest_pos, src_data + src_pos,
- elem_size);
- dest_pos += elem_size;
- }
- *dest_size = dest_pos;
- hdr = (struct ieee80211_hdr *)dest_data;
-
- /* Set the frame control. */
- hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
- IEEE80211_STYPE_PROBE_RESP);
- dur = ieee80211_generic_frame_duration(dev->wl->hw,
- dev->wl->vif, *dest_size,
- rate);
- hdr->duration_id = dur;
-
- return dest_data;
-}
-
-static void b43_write_probe_resp_template(struct b43_wldev *dev,
- u16 ram_offset,
- u16 shm_size_offset,
- struct ieee80211_rate *rate)
-{
- const u8 *probe_resp_data;
- u16 size;
-
- size = dev->wl->current_beacon->len;
- probe_resp_data = b43_generate_probe_resp(dev, &size, rate);
- if (unlikely(!probe_resp_data))
- return;
-
- /* Looks like PLCP headers plus packet timings are stored for
- * all possible basic rates
- */
- b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]);
- b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]);
- b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]);
- b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]);
-
- size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
- b43_write_template_common(dev, probe_resp_data,
- size, ram_offset, shm_size_offset,
- rate->hw_value);
- kfree(probe_resp_data);
-}
-
static void b43_upload_beacon0(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
@@ -1545,10 +1495,6 @@
if (wl->beacon0_uploaded)
return;
b43_write_beacon_template(dev, 0x68, 0x18);
- /* FIXME: Probe resp upload doesn't really belong here,
- * but we don't use that feature anyway. */
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
wl->beacon0_uploaded = 1;
}
@@ -1611,6 +1557,27 @@
}
}
+static void b43_do_beacon_update_trigger_work(struct b43_wldev *dev)
+{
+ u32 old_irq_mask = dev->irq_mask;
+
+ /* update beacon right away or defer to irq */
+ handle_irq_beacon(dev);
+ if (old_irq_mask != dev->irq_mask) {
+ /* The handler updated the IRQ mask. */
+ B43_WARN_ON(!dev->irq_mask);
+ if (b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)) {
+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
+ } else {
+ /* Device interrupts are currently disabled. That means
+ * we just ran the hardirq handler and scheduled the
+ * IRQ thread. The thread will write the IRQ mask when
+ * it finished, so there's nothing to do here. Writing
+ * the mask _here_ would incorrectly re-enable IRQs. */
+ }
+ }
+}
+
static void b43_beacon_update_trigger_work(struct work_struct *work)
{
struct b43_wl *wl = container_of(work, struct b43_wl,
@@ -1620,19 +1587,22 @@
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- spin_lock_irq(&wl->irq_lock);
- /* update beacon right away or defer to irq */
- handle_irq_beacon(dev);
- /* The handler might have updated the IRQ mask. */
- b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
- mmiowb();
- spin_unlock_irq(&wl->irq_lock);
+ if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ /* wl->mutex is enough. */
+ b43_do_beacon_update_trigger_work(dev);
+ mmiowb();
+ } else {
+ spin_lock_irq(&wl->hardirq_lock);
+ b43_do_beacon_update_trigger_work(dev);
+ mmiowb();
+ spin_unlock_irq(&wl->hardirq_lock);
+ }
}
mutex_unlock(&wl->mutex);
}
/* Asynchronously update the packet templates in template RAM.
- * Locking: Requires wl->irq_lock to be locked. */
+ * Locking: Requires wl->mutex to be locked. */
static void b43_update_templates(struct b43_wl *wl)
{
struct sk_buff *beacon;
@@ -1656,7 +1626,7 @@
wl->current_beacon = beacon;
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
- queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
+ ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
}
static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
@@ -1769,18 +1739,15 @@
B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
}
-/* Interrupt handler bottom-half */
-static void b43_interrupt_tasklet(struct b43_wldev *dev)
+static void b43_do_interrupt_thread(struct b43_wldev *dev)
{
u32 reason;
u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
u32 merged_dma_reason = 0;
int i;
- unsigned long flags;
- spin_lock_irqsave(&dev->wl->irq_lock, flags);
-
- B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED);
+ if (unlikely(b43_status(dev) != B43_STAT_STARTED))
+ return;
reason = dev->irq_reason;
for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
@@ -1813,8 +1780,6 @@
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
b43_controller_restart(dev, "DMA error");
- mmiowb();
- spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
return;
}
if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@@ -1858,47 +1823,36 @@
if (reason & B43_IRQ_TX_OK)
handle_irq_transmit_status(dev);
+ /* Re-enable interrupts on the device by restoring the current interrupt mask. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
- mmiowb();
- spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
}
-static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason)
+/* Interrupt thread handler. Handles device interrupts in thread context. */
+static irqreturn_t b43_interrupt_thread_handler(int irq, void *dev_id)
{
- b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
-
- b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
- b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
- b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
- b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
- b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
-/* Unused ring
- b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
-*/
-}
-
-/* Interrupt handler top-half */
-static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
-{
- irqreturn_t ret = IRQ_NONE;
struct b43_wldev *dev = dev_id;
+
+ mutex_lock(&dev->wl->mutex);
+ b43_do_interrupt_thread(dev);
+ mmiowb();
+ mutex_unlock(&dev->wl->mutex);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t b43_do_interrupt(struct b43_wldev *dev)
+{
u32 reason;
- B43_WARN_ON(!dev);
+ /* This code runs under wl->hardirq_lock, but _only_ on non-SDIO busses.
+ * On SDIO, this runs under wl->mutex. */
- spin_lock(&dev->wl->irq_lock);
-
- if (unlikely(b43_status(dev) < B43_STAT_STARTED)) {
- /* This can only happen on shared IRQ lines. */
- goto out;
- }
reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) /* shared IRQ */
- goto out;
- ret = IRQ_HANDLED;
+ return IRQ_NONE;
reason &= dev->irq_mask;
if (!reason)
- goto out;
+ return IRQ_HANDLED;
dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
& 0x0001DC00;
@@ -1915,15 +1869,38 @@
& 0x0000DC00;
*/
- b43_interrupt_ack(dev, reason);
- /* disable all IRQs. They are enabled again in the bottom half. */
+ /* ACK the interrupt. */
+ b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
+ b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
+ b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
+ b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
+ b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
+ b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
+/* Unused ring
+ b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
+*/
+
+ /* Disable IRQs on the device. The IRQ thread handler will re-enable them. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
- /* save the reason code and call our bottom half. */
+ /* Save the reason bitmasks for the IRQ thread handler. */
dev->irq_reason = reason;
- tasklet_schedule(&dev->isr_tasklet);
-out:
+
+ return IRQ_WAKE_THREAD;
+}
+
+/* Interrupt handler top-half. This runs with interrupts disabled. */
+static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
+{
+ struct b43_wldev *dev = dev_id;
+ irqreturn_t ret;
+
+ if (unlikely(b43_status(dev) < B43_STAT_STARTED))
+ return IRQ_NONE;
+
+ spin_lock(&dev->wl->hardirq_lock);
+ ret = b43_do_interrupt(dev);
mmiowb();
- spin_unlock(&dev->wl->irq_lock);
+ spin_unlock(&dev->wl->hardirq_lock);
return ret;
}
@@ -2061,8 +2038,12 @@
filename = "ucode5";
else if ((rev >= 11) && (rev <= 12))
filename = "ucode11";
- else if (rev >= 13)
+ else if (rev == 13)
filename = "ucode13";
+ else if (rev == 14)
+ filename = "ucode14";
+ else if (rev >= 15)
+ filename = "ucode15";
else
goto err_no_ucode;
err = b43_do_request_fw(ctx, filename, &fw->ucode);
@@ -2110,6 +2091,16 @@
else
goto err_no_initvals;
break;
+ case B43_PHYTYPE_LP:
+ if (rev == 13)
+ filename = "lp0initvals13";
+ else if (rev == 14)
+ filename = "lp0initvals14";
+ else if (rev >= 15)
+ filename = "lp0initvals15";
+ else
+ goto err_no_initvals;
+ break;
default:
goto err_no_initvals;
}
@@ -2144,6 +2135,16 @@
else
goto err_no_initvals;
break;
+ case B43_PHYTYPE_LP:
+ if (rev == 13)
+ filename = "lp0bsinitvals13";
+ else if (rev == 14)
+ filename = "lp0bsinitvals14";
+ else if (rev >= 15)
+ filename = "lp0bsinitvals15";
+ else
+ goto err_no_initvals;
+ break;
default:
goto err_no_initvals;
}
@@ -2671,6 +2672,7 @@
case B43_PHYTYPE_A:
case B43_PHYTYPE_G:
case B43_PHYTYPE_N:
+ case B43_PHYTYPE_LP:
b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
@@ -2916,7 +2918,7 @@
delay = msecs_to_jiffies(50);
else
delay = round_jiffies_relative(HZ * 15);
- queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
+ ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay);
out:
mutex_unlock(&wl->mutex);
}
@@ -2927,15 +2929,16 @@
dev->periodic_state = 0;
INIT_DELAYED_WORK(work, b43_periodic_work_handler);
- queue_delayed_work(dev->wl->hw->workqueue, work, 0);
+ ieee80211_queue_delayed_work(dev->wl->hw, work, 0);
}
/* Check if communication with the device works correctly. */
static int b43_validate_chipaccess(struct b43_wldev *dev)
{
- u32 v, backup;
+ u32 v, backup0, backup4;
- backup = b43_shm_read32(dev, B43_SHM_SHARED, 0);
+ backup0 = b43_shm_read32(dev, B43_SHM_SHARED, 0);
+ backup4 = b43_shm_read32(dev, B43_SHM_SHARED, 4);
/* Check for read/write and endianness problems. */
b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
@@ -2945,7 +2948,23 @@
if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
goto error;
- b43_shm_write32(dev, B43_SHM_SHARED, 0, backup);
+ /* Check if unaligned 32bit SHM_SHARED access works properly.
+ * However, don't bail out on failure, because it's noncritical. */
+ b43_shm_write16(dev, B43_SHM_SHARED, 0, 0x1122);
+ b43_shm_write16(dev, B43_SHM_SHARED, 2, 0x3344);
+ b43_shm_write16(dev, B43_SHM_SHARED, 4, 0x5566);
+ b43_shm_write16(dev, B43_SHM_SHARED, 6, 0x7788);
+ if (b43_shm_read32(dev, B43_SHM_SHARED, 2) != 0x55663344)
+ b43warn(dev->wl, "Unaligned 32bit SHM read access is broken\n");
+ b43_shm_write32(dev, B43_SHM_SHARED, 2, 0xAABBCCDD);
+ if (b43_shm_read16(dev, B43_SHM_SHARED, 0) != 0x1122 ||
+ b43_shm_read16(dev, B43_SHM_SHARED, 2) != 0xCCDD ||
+ b43_shm_read16(dev, B43_SHM_SHARED, 4) != 0xAABB ||
+ b43_shm_read16(dev, B43_SHM_SHARED, 6) != 0x7788)
+ b43warn(dev->wl, "Unaligned 32bit SHM write access is broken\n");
+
+ b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
+ b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);
if ((dev->dev->id.revision >= 3) && (dev->dev->id.revision <= 10)) {
/* The 32bit register shadows the two 16bit registers
@@ -2972,17 +2991,14 @@
static void b43_security_init(struct b43_wldev *dev)
{
- dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
- B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
/* KTP is a word address, but we address SHM bytewise.
* So multiply by two.
*/
dev->ktp *= 2;
- if (dev->dev->id.revision >= 5) {
- /* Number of RCMTA address slots */
- b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8);
- }
+ /* Number of RCMTA address slots */
+ b43_write16(dev, B43_MMIO_RCMTA_COUNT, B43_NR_PAIRWISE_KEYS);
+ /* Clear the key memory. */
b43_clear_keys(dev);
}
@@ -2990,15 +3006,12 @@
static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
- unsigned long flags;
- /* Don't take wl->mutex here, as it could deadlock with
- * hwrng internal locking. It's not needed to take
- * wl->mutex here, anyway. */
+ /* FIXME: We need to take wl->mutex here to make sure the device
+ * is not going away from under our ass. However it could deadlock
+ * with hwrng internal locking. */
- spin_lock_irqsave(&wl->irq_lock, flags);
*data = b43_read16(wl->current_dev, B43_MMIO_RNG);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
return (sizeof(u16));
}
@@ -3034,46 +3047,52 @@
return err;
}
-static int b43_op_tx(struct ieee80211_hw *hw,
- struct sk_buff *skb)
+static void b43_tx_work(struct work_struct *work)
{
- struct b43_wl *wl = hw_to_b43_wl(hw);
- struct b43_wldev *dev = wl->current_dev;
- unsigned long flags;
- int err;
+ struct b43_wl *wl = container_of(work, struct b43_wl, tx_work);
+ struct b43_wldev *dev;
+ struct sk_buff *skb;
+ int err = 0;
- if (unlikely(skb->len < 2 + 2 + 6)) {
- /* Too short, this can't be a valid frame. */
- goto drop_packet;
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) {
+ mutex_unlock(&wl->mutex);
+ return;
}
- B43_WARN_ON(skb_shinfo(skb)->nr_frags);
- if (unlikely(!dev))
- goto drop_packet;
- /* Transmissions on seperate queues can run concurrently. */
- read_lock_irqsave(&wl->tx_lock, flags);
+ while (skb_queue_len(&wl->tx_queue)) {
+ skb = skb_dequeue(&wl->tx_queue);
- err = -ENODEV;
- if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
if (b43_using_pio_transfers(dev))
err = b43_pio_tx(dev, skb);
else
err = b43_dma_tx(dev, skb);
+ if (unlikely(err))
+ dev_kfree_skb(skb); /* Drop it */
}
- read_unlock_irqrestore(&wl->tx_lock, flags);
+ mutex_unlock(&wl->mutex);
+}
- if (unlikely(err))
- goto drop_packet;
- return NETDEV_TX_OK;
+static int b43_op_tx(struct ieee80211_hw *hw,
+ struct sk_buff *skb)
+{
+ struct b43_wl *wl = hw_to_b43_wl(hw);
-drop_packet:
- /* We can not transmit this packet. Drop it. */
- dev_kfree_skb_any(skb);
+ if (unlikely(skb->len < 2 + 2 + 6)) {
+ /* Too short, this can't be a valid frame. */
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ B43_WARN_ON(skb_shinfo(skb)->nr_frags);
+
+ skb_queue_tail(&wl->tx_queue, skb);
+ ieee80211_queue_work(wl->hw, &wl->tx_work);
+
return NETDEV_TX_OK;
}
-/* Locking: wl->irq_lock */
static void b43_qos_params_upload(struct b43_wldev *dev,
const struct ieee80211_tx_queue_params *p,
u16 shm_offset)
@@ -3082,6 +3101,9 @@
int bslots, tmp;
unsigned int i;
+ if (!dev->qos_enabled)
+ return;
+
bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;
memset(¶ms, 0, sizeof(params));
@@ -3127,6 +3149,9 @@
struct b43_qos_params *params;
unsigned int i;
+ if (!dev->qos_enabled)
+ return;
+
BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
ARRAY_SIZE(wl->qos_params));
@@ -3186,6 +3211,16 @@
/* Initialize the core's QOS capabilities */
static void b43_qos_init(struct b43_wldev *dev)
{
+ if (!dev->qos_enabled) {
+ /* Disable QOS support. */
+ b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_EDCF);
+ b43_write16(dev, B43_MMIO_IFSCTL,
+ b43_read16(dev, B43_MMIO_IFSCTL)
+ & ~B43_MMIO_IFSCTL_USE_EDCF);
+ b43dbg(dev->wl, "QoS disabled\n");
+ return;
+ }
+
/* Upload the current QOS parameters. */
b43_qos_upload_all(dev);
@@ -3194,6 +3229,7 @@
b43_write16(dev, B43_MMIO_IFSCTL,
b43_read16(dev, B43_MMIO_IFSCTL)
| B43_MMIO_IFSCTL_USE_EDCF);
+ b43dbg(dev->wl, "QoS enabled\n");
}
static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
@@ -3235,22 +3271,20 @@
struct ieee80211_tx_queue_stats *stats)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- struct b43_wldev *dev = wl->current_dev;
- unsigned long flags;
+ struct b43_wldev *dev;
int err = -ENODEV;
- if (!dev)
- goto out;
- spin_lock_irqsave(&wl->irq_lock, flags);
- if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (dev && b43_status(dev) >= B43_STAT_STARTED) {
if (b43_using_pio_transfers(dev))
b43_pio_get_tx_stats(dev, stats);
else
b43_dma_get_tx_stats(dev, stats);
err = 0;
}
- spin_unlock_irqrestore(&wl->irq_lock, flags);
-out:
+ mutex_unlock(&wl->mutex);
+
return err;
}
@@ -3258,11 +3292,10 @@
struct ieee80211_low_level_stats *stats)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- unsigned long flags;
- spin_lock_irqsave(&wl->irq_lock, flags);
+ mutex_lock(&wl->mutex);
memcpy(stats, &wl->ieee_stats, sizeof(*stats));
- spin_unlock_irqrestore(&wl->irq_lock, flags);
+ mutex_unlock(&wl->mutex);
return 0;
}
@@ -3274,7 +3307,6 @@
u64 tsf;
mutex_lock(&wl->mutex);
- spin_lock_irq(&wl->irq_lock);
dev = wl->current_dev;
if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
@@ -3282,7 +3314,6 @@
else
tsf = 0;
- spin_unlock_irq(&wl->irq_lock);
mutex_unlock(&wl->mutex);
return tsf;
@@ -3294,13 +3325,11 @@
struct b43_wldev *dev;
mutex_lock(&wl->mutex);
- spin_lock_irq(&wl->irq_lock);
dev = wl->current_dev;
if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
b43_tsf_write(dev, tsf);
- spin_unlock_irq(&wl->irq_lock);
mutex_unlock(&wl->mutex);
}
@@ -3386,7 +3415,7 @@
prev_status = b43_status(down_dev);
/* Shutdown the currently running core. */
if (prev_status >= B43_STAT_STARTED)
- b43_wireless_core_stop(down_dev);
+ down_dev = b43_wireless_core_stop(down_dev);
if (prev_status >= B43_STAT_INITIALIZED)
b43_wireless_core_exit(down_dev);
@@ -3450,7 +3479,6 @@
struct b43_wldev *dev;
struct b43_phy *phy;
struct ieee80211_conf *conf = &hw->conf;
- unsigned long flags;
int antenna;
int err = 0;
@@ -3481,13 +3509,11 @@
/* Adjust the desired TX power level. */
if (conf->power_level != 0) {
- spin_lock_irqsave(&wl->irq_lock, flags);
if (conf->power_level != phy->desired_txpower) {
phy->desired_txpower = conf->power_level;
b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
B43_TXPWR_IGNORE_TSSI);
}
- spin_unlock_irqrestore(&wl->irq_lock, flags);
}
/* Antennas for RX and management frame TX. */
@@ -3572,7 +3598,6 @@
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
- unsigned long flags;
mutex_lock(&wl->mutex);
@@ -3582,7 +3607,6 @@
B43_WARN_ON(wl->vif != vif);
- spin_lock_irqsave(&wl->irq_lock, flags);
if (changed & BSS_CHANGED_BSSID) {
if (conf->bssid)
memcpy(wl->bssid, conf->bssid, ETH_ALEN);
@@ -3600,7 +3624,6 @@
if (changed & BSS_CHANGED_BSSID)
b43_write_mac_bssid_templates(dev);
}
- spin_unlock_irqrestore(&wl->irq_lock, flags);
b43_mac_suspend(dev);
@@ -3641,15 +3664,6 @@
return -ENOSPC; /* User disabled HW-crypto */
mutex_lock(&wl->mutex);
- spin_lock_irq(&wl->irq_lock);
- write_lock(&wl->tx_lock);
- /* Why do we need all this locking here?
- * mutex -> Every config operation must take it.
- * irq_lock -> We modify the dev->key array, which is accessed
- * in the IRQ handlers.
- * tx_lock -> We modify the dev->key array, which is accessed
- * in the TX handler.
- */
dev = wl->current_dev;
err = -ENODEV;
@@ -3687,8 +3701,10 @@
switch (cmd) {
case SET_KEY:
- if (algorithm == B43_SEC_ALGO_TKIP) {
- /* FIXME: No TKIP hardware encryption for now. */
+ if (algorithm == B43_SEC_ALGO_TKIP &&
+ (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE) ||
+ !modparam_hwtkip)) {
+ /* We support only pairwise key */
err = -EOPNOTSUPP;
goto out_unlock;
}
@@ -3718,6 +3734,8 @@
b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
}
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ if (algorithm == B43_SEC_ALGO_TKIP)
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
break;
case DISABLE_KEY: {
err = b43_key_clear(dev, key->hw_key_idx);
@@ -3737,8 +3755,6 @@
sta ? sta->addr : bcast_addr);
b43_dump_keymemory(dev);
}
- write_unlock(&wl->tx_lock);
- spin_unlock_irq(&wl->irq_lock);
mutex_unlock(&wl->mutex);
return err;
@@ -3746,18 +3762,18 @@
static void b43_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed, unsigned int *fflags,
- int mc_count, struct dev_addr_list *mc_list)
+ u64 multicast)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- struct b43_wldev *dev = wl->current_dev;
- unsigned long flags;
+ struct b43_wldev *dev;
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
if (!dev) {
*fflags = 0;
- return;
+ goto out_unlock;
}
- spin_lock_irqsave(&wl->irq_lock, flags);
*fflags &= FIF_PROMISC_IN_BSS |
FIF_ALLMULTI |
FIF_FCSFAIL |
@@ -3778,41 +3794,70 @@
if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
b43_adjust_opmode(dev);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
}
-/* Locking: wl->mutex */
-static void b43_wireless_core_stop(struct b43_wldev *dev)
+/* Locking: wl->mutex
+ * Returns the current dev. This might be different from the passed in dev,
+ * because the core might be gone away while we unlocked the mutex. */
+static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
- unsigned long flags;
+ struct b43_wldev *orig_dev;
- if (b43_status(dev) < B43_STAT_STARTED)
- return;
+redo:
+ if (!dev || b43_status(dev) < B43_STAT_STARTED)
+ return dev;
- /* Disable and sync interrupts. We must do this before than
- * setting the status to INITIALIZED, as the interrupt handler
- * won't care about IRQs then. */
- spin_lock_irqsave(&wl->irq_lock, flags);
- b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
- b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- b43_synchronize_irq(dev);
-
- write_lock_irqsave(&wl->tx_lock, flags);
- b43_set_status(dev, B43_STAT_INITIALIZED);
- write_unlock_irqrestore(&wl->tx_lock, flags);
-
- b43_pio_stop(dev);
+ /* Cancel work. Unlock to avoid deadlocks. */
mutex_unlock(&wl->mutex);
- /* Must unlock as it would otherwise deadlock. No races here.
- * Cancel the possibly running self-rearming periodic work. */
cancel_delayed_work_sync(&dev->periodic_work);
+ cancel_work_sync(&wl->tx_work);
mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (!dev || b43_status(dev) < B43_STAT_STARTED) {
+ /* Whoops, aliens ate up the device while we were unlocked. */
+ return dev;
+ }
+
+ /* Disable interrupts on the device. */
+ b43_set_status(dev, B43_STAT_INITIALIZED);
+ if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ /* wl->mutex is locked. That is enough. */
+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
+ b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
+ } else {
+ spin_lock_irq(&wl->hardirq_lock);
+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
+ b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
+ spin_unlock_irq(&wl->hardirq_lock);
+ }
+ /* Synchronize the interrupt handlers. Unlock to avoid deadlocks. */
+ orig_dev = dev;
+ mutex_unlock(&wl->mutex);
+ synchronize_irq(dev->dev->irq);
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (!dev)
+ return dev;
+ if (dev != orig_dev) {
+ if (b43_status(dev) >= B43_STAT_STARTED)
+ goto redo;
+ return dev;
+ }
+ B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK));
+
+ /* Drain the TX queue */
+ while (skb_queue_len(&wl->tx_queue))
+ dev_kfree_skb(skb_dequeue(&wl->tx_queue));
b43_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43dbg(wl, "Wireless interface stopped\n");
+
+ return dev;
}
/* Locking: wl->mutex */
@@ -3823,8 +3868,9 @@
B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
drain_txstatus_queue(dev);
- err = request_irq(dev->dev->irq, b43_interrupt_handler,
- IRQF_SHARED, KBUILD_MODNAME, dev);
+ err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
+ b43_interrupt_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
goto out;
@@ -3885,7 +3931,7 @@
#endif
#ifdef CONFIG_B43_PHY_LP
case B43_PHYTYPE_LP:
- if (phy_rev > 1)
+ if (phy_rev > 2)
unsupported = 1;
break;
#endif
@@ -3942,7 +3988,7 @@
unsupported = 1;
break;
case B43_PHYTYPE_LP:
- if (radio_ver != 0x2062)
+ if (radio_ver != 0x2062 && radio_ver != 0x2063)
unsupported = 1;
break;
default:
@@ -4046,16 +4092,20 @@
bus->pcicore.dev->id.revision <= 5) {
/* IMCFGLO timeouts workaround. */
tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
switch (bus->bustype) {
case SSB_BUSTYPE_PCI:
case SSB_BUSTYPE_PCMCIA:
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp &= ~SSB_IMCFGLO_SERTO;
tmp |= 0x32;
break;
case SSB_BUSTYPE_SSB:
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp &= ~SSB_IMCFGLO_SERTO;
tmp |= 0x53;
break;
+ default:
+ break;
}
ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
}
@@ -4103,8 +4153,8 @@
{
u32 macctl;
- B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
- if (b43_status(dev) != B43_STAT_INITIALIZED)
+ B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED);
+ if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
return;
b43_set_status(dev, B43_STAT_UNINIT);
@@ -4257,7 +4307,6 @@
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
- unsigned long flags;
int err = -EOPNOTSUPP;
/* TODO: allow WDS/AP devices to coexist */
@@ -4281,12 +4330,10 @@
wl->if_type = conf->type;
memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
- spin_lock_irqsave(&wl->irq_lock, flags);
b43_adjust_opmode(dev);
b43_set_pretbtt(dev);
b43_set_synth_pu_delay(dev, 0);
b43_upload_card_macaddress(dev);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
err = 0;
out_mutex_unlock:
@@ -4300,7 +4347,6 @@
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
- unsigned long flags;
b43dbg(wl, "Removing Interface type %d\n", conf->type);
@@ -4312,11 +4358,9 @@
wl->operating = 0;
- spin_lock_irqsave(&wl->irq_lock, flags);
b43_adjust_opmode(dev);
memset(wl->mac_addr, 0, ETH_ALEN);
b43_upload_card_macaddress(dev);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
mutex_unlock(&wl->mutex);
}
@@ -4376,10 +4420,15 @@
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
- if (b43_status(dev) >= B43_STAT_STARTED)
- b43_wireless_core_stop(dev);
+ if (b43_status(dev) >= B43_STAT_STARTED) {
+ dev = b43_wireless_core_stop(dev);
+ if (!dev)
+ goto out_unlock;
+ }
b43_wireless_core_exit(dev);
wl->radio_enabled = 0;
+
+out_unlock:
mutex_unlock(&wl->mutex);
cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4389,11 +4438,10 @@
struct ieee80211_sta *sta, bool set)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- unsigned long flags;
- spin_lock_irqsave(&wl->irq_lock, flags);
+ mutex_lock(&wl->mutex);
b43_update_templates(wl);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
+ mutex_unlock(&wl->mutex);
return 0;
}
@@ -4445,6 +4493,7 @@
.bss_info_changed = b43_op_bss_info_changed,
.configure_filter = b43_op_configure_filter,
.set_key = b43_op_set_key,
+ .update_tkip_key = b43_op_update_tkip_key,
.get_stats = b43_op_get_stats,
.get_tx_stats = b43_op_get_tx_stats,
.get_tsf = b43_op_get_tsf,
@@ -4473,8 +4522,13 @@
prev_status = b43_status(dev);
/* Bring the device down... */
- if (prev_status >= B43_STAT_STARTED)
- b43_wireless_core_stop(dev);
+ if (prev_status >= B43_STAT_STARTED) {
+ dev = b43_wireless_core_stop(dev);
+ if (!dev) {
+ err = -ENODEV;
+ goto out;
+ }
+ }
if (prev_status >= B43_STAT_INITIALIZED)
b43_wireless_core_exit(dev);
@@ -4580,9 +4634,12 @@
case B43_PHYTYPE_A:
have_5ghz_phy = 1;
break;
+ case B43_PHYTYPE_LP: //FIXME not always!
+#if 0 //FIXME enabling 5GHz causes a NULL pointer dereference
+ have_5ghz_phy = 1;
+#endif
case B43_PHYTYPE_G:
case B43_PHYTYPE_N:
- case B43_PHYTYPE_LP:
have_2ghz_phy = 1;
break;
default:
@@ -4597,7 +4654,8 @@
}
if (1 /* disable A-PHY */) {
/* FIXME: For now we disable the A-PHY on multi-PHY devices. */
- if (dev->phy.type != B43_PHYTYPE_N) {
+ if (dev->phy.type != B43_PHYTYPE_N &&
+ dev->phy.type != B43_PHYTYPE_LP) {
have_2ghz_phy = 1;
have_5ghz_phy = 0;
}
@@ -4685,9 +4743,6 @@
wldev->wl = wl;
b43_set_status(wldev, B43_STAT_UNINIT);
wldev->bad_frames_preempt = modparam_bad_frames_preempt;
- tasklet_init(&wldev->isr_tasklet,
- (void (*)(unsigned long))b43_interrupt_tasklet,
- (unsigned long)wldev);
INIT_LIST_HEAD(&wldev->list);
err = b43_wireless_core_attach(wldev);
@@ -4784,14 +4839,14 @@
/* Initialize struct b43_wl */
wl->hw = hw;
- spin_lock_init(&wl->irq_lock);
- rwlock_init(&wl->tx_lock);
spin_lock_init(&wl->leds_lock);
- spin_lock_init(&wl->shm_lock);
mutex_init(&wl->mutex);
+ spin_lock_init(&wl->hardirq_lock);
INIT_LIST_HEAD(&wl->devlist);
INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
+ INIT_WORK(&wl->tx_work, b43_tx_work);
+ skb_queue_head_init(&wl->tx_queue);
ssb_set_devtypedata(dev, wl);
b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n",
@@ -4873,7 +4928,7 @@
if (b43_status(dev) < B43_STAT_INITIALIZED)
return;
b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
- queue_work(dev->wl->hw->workqueue, &dev->restart_work);
+ ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
#ifdef CONFIG_PM
@@ -4889,8 +4944,8 @@
wldev->suspend_in_progress = true;
wldev->suspend_init_status = b43_status(wldev);
if (wldev->suspend_init_status >= B43_STAT_STARTED)
- b43_wireless_core_stop(wldev);
- if (wldev->suspend_init_status >= B43_STAT_INITIALIZED)
+ wldev = b43_wireless_core_stop(wldev);
+ if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED)
b43_wireless_core_exit(wldev);
mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index 950fb1b..40db036 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -112,18 +112,14 @@
void b43_tsf_write(struct b43_wldev *dev, u64 tsf);
u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset);
-u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset);
u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset);
-u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset);
void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value);
-void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value);
void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value);
-void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value);
u64 b43_hf_read(struct b43_wldev *dev);
void b43_hf_write(struct b43_wldev *dev, u64 value);
-void b43_dummy_transmission(struct b43_wldev *dev);
+void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on);
void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags);
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index 816e028..d90217c 100644
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -518,58 +518,40 @@
static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
{//TODO
struct b43_phy *phy = &dev->phy;
- u64 hf;
u16 tmp;
int autodiv = 0;
if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1)
autodiv = 1;
- hf = b43_hf_read(dev);
- hf &= ~B43_HF_ANTDIVHELP;
- b43_hf_write(dev, hf);
+ b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP);
- tmp = b43_phy_read(dev, B43_PHY_BBANDCFG);
- tmp &= ~B43_PHY_BBANDCFG_RXANT;
- tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna)
- << B43_PHY_BBANDCFG_RXANT_SHIFT;
- b43_phy_write(dev, B43_PHY_BBANDCFG, tmp);
+ b43_phy_maskset(dev, B43_PHY_BBANDCFG, ~B43_PHY_BBANDCFG_RXANT,
+ (autodiv ? B43_ANTENNA_AUTO1 : antenna) <<
+ B43_PHY_BBANDCFG_RXANT_SHIFT);
if (autodiv) {
tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
- if (antenna == B43_ANTENNA_AUTO0)
+ if (antenna == B43_ANTENNA_AUTO1)
tmp &= ~B43_PHY_ANTDWELL_AUTODIV1;
else
tmp |= B43_PHY_ANTDWELL_AUTODIV1;
b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
}
- if (phy->rev < 3) {
- tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
- tmp = (tmp & 0xFF00) | 0x24;
- b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
- } else {
- tmp = b43_phy_read(dev, B43_PHY_OFDM61);
- tmp |= 0x10;
- b43_phy_write(dev, B43_PHY_OFDM61, tmp);
- if (phy->analog == 3) {
- b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT,
- 0x1D);
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- 8);
+ if (phy->rev < 3)
+ b43_phy_maskset(dev, B43_PHY_ANTDWELL, 0xFF00, 0x24);
+ else {
+ b43_phy_set(dev, B43_PHY_OFDM61, 0x10);
+ if (phy->rev == 3) {
+ b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, 0x1D);
+ b43_phy_write(dev, B43_PHY_ADIVRELATED, 8);
} else {
- b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT,
- 0x3A);
- tmp =
- b43_phy_read(dev,
- B43_PHY_ADIVRELATED);
- tmp = (tmp & 0xFF00) | 8;
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- tmp);
+ b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, 0x3A);
+ b43_phy_maskset(dev, B43_PHY_ADIVRELATED, 0xFF00, 8);
}
}
- hf |= B43_HF_ANTDIVHELP;
- b43_hf_write(dev, hf);
+ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP);
}
static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 6d24162..75b26e1 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -240,22 +240,44 @@
dev->phy.ops->phy_write(dev, reg, value);
}
+void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
+{
+ assert_mac_suspended(dev);
+ dev->phy.ops->phy_write(dev, destreg,
+ dev->phy.ops->phy_read(dev, srcreg));
+}
+
void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
{
- b43_phy_write(dev, offset,
- b43_phy_read(dev, offset) & mask);
+ if (dev->phy.ops->phy_maskset) {
+ assert_mac_suspended(dev);
+ dev->phy.ops->phy_maskset(dev, offset, mask, 0);
+ } else {
+ b43_phy_write(dev, offset,
+ b43_phy_read(dev, offset) & mask);
+ }
}
void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
{
- b43_phy_write(dev, offset,
- b43_phy_read(dev, offset) | set);
+ if (dev->phy.ops->phy_maskset) {
+ assert_mac_suspended(dev);
+ dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set);
+ } else {
+ b43_phy_write(dev, offset,
+ b43_phy_read(dev, offset) | set);
+ }
}
void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
{
- b43_phy_write(dev, offset,
- (b43_phy_read(dev, offset) & mask) | set);
+ if (dev->phy.ops->phy_maskset) {
+ assert_mac_suspended(dev);
+ dev->phy.ops->phy_maskset(dev, offset, mask, set);
+ } else {
+ b43_phy_write(dev, offset,
+ (b43_phy_read(dev, offset) & mask) | set);
+ }
}
int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
@@ -325,7 +347,6 @@
mutex_unlock(&wl->mutex);
}
-/* Called with wl->irq_lock locked */
void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
{
struct b43_phy *phy = &dev->phy;
@@ -352,7 +373,7 @@
/* We must adjust the transmission power in hardware.
* Schedule b43_phy_txpower_adjust_work(). */
- queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work);
+ ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work);
}
int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 44cc918..9edd4e8 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -49,11 +49,11 @@
/* Antenna identifiers */
enum {
- B43_ANTENNA0, /* Antenna 0 */
- B43_ANTENNA1, /* Antenna 0 */
- B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */
- B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */
- B43_ANTENNA2,
+ B43_ANTENNA0 = 0, /* Antenna 0 */
+ B43_ANTENNA1 = 1, /* Antenna 1 */
+ B43_ANTENNA_AUTO0 = 2, /* Automatic, starting with antenna 0 */
+ B43_ANTENNA_AUTO1 = 3, /* Automatic, starting with antenna 1 */
+ B43_ANTENNA2 = 4,
B43_ANTENNA3 = 8,
B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0,
@@ -95,6 +95,8 @@
* Must not be NULL.
* @phy_write: Write to a PHY register.
* Must not be NULL.
+ * @phy_maskset: Maskset a PHY register, taking shortcuts.
+ * If it is NULL, a generic algorithm is used.
* @radio_read: Read from a Radio register.
* Must not be NULL.
* @radio_write: Write to a Radio register.
@@ -129,7 +131,7 @@
* If the parameter "ignore_tssi" is true, the TSSI values should
* be ignored and a recalculation of the power settings should be
* done even if the TSSI values did not change.
- * This callback is called with wl->irq_lock held and must not sleep.
+ * This function may sleep, but should not.
* Must not be NULL.
* @adjust_txpower: Write the previously calculated TX power settings
* (from @recalc_txpower) to the hardware.
@@ -154,6 +156,7 @@
/* Register access */
u16 (*phy_read)(struct b43_wldev *dev, u16 reg);
void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value);
+ void (*phy_maskset)(struct b43_wldev *dev, u16 reg, u16 mask, u16 set);
u16 (*radio_read)(struct b43_wldev *dev, u16 reg);
void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value);
@@ -291,6 +294,11 @@
void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value);
/**
+ * b43_phy_copy - copy contents of 16bit PHY register to another
+ */
+void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg);
+
+/**
* b43_phy_mask - Mask a PHY register with a mask
*/
void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask);
@@ -371,7 +379,6 @@
*
* Compare the current TX power output to the desired power emission
* and schedule an adjustment in case it mismatches.
- * Requires wl->irq_lock locked.
*
* @flags: OR'ed enum b43_phy_txpower_check_flags flags.
* See the docs below.
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 5300232..382826a 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -333,7 +333,7 @@
b43_phy_maskset(dev, 0x04A1, 0xBFBF, tmp);
b43_phy_maskset(dev, 0x04A2, 0xBFBF, tmp);
}
- b43_dummy_transmission(dev);
+ b43_dummy_transmission(dev, false, true);
}
static void b43_set_original_gains(struct b43_wldev *dev)
@@ -365,7 +365,7 @@
b43_phy_maskset(dev, 0x04A0, 0xBFBF, 0x4040);
b43_phy_maskset(dev, 0x04A1, 0xBFBF, 0x4040);
b43_phy_maskset(dev, 0x04A2, 0xBFBF, 0x4000);
- b43_dummy_transmission(dev);
+ b43_dummy_transmission(dev, false, true);
}
/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
@@ -1964,7 +1964,7 @@
}
b43_set_txpower_g(dev, &bbatt, &rfatt, 0);
}
- b43_dummy_transmission(dev);
+ b43_dummy_transmission(dev, false, true);
gphy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI);
if (B43_DEBUG) {
/* Current-Idle-TSSI sanity check. */
@@ -2651,65 +2651,54 @@
static void b43_gphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
{
struct b43_phy *phy = &dev->phy;
- u64 hf;
u16 tmp;
int autodiv = 0;
if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1)
autodiv = 1;
- hf = b43_hf_read(dev);
- hf &= ~B43_HF_ANTDIVHELP;
- b43_hf_write(dev, hf);
+ b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP);
- tmp = b43_phy_read(dev, B43_PHY_BBANDCFG);
- tmp &= ~B43_PHY_BBANDCFG_RXANT;
- tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna)
- << B43_PHY_BBANDCFG_RXANT_SHIFT;
- b43_phy_write(dev, B43_PHY_BBANDCFG, tmp);
+ b43_phy_maskset(dev, B43_PHY_BBANDCFG, ~B43_PHY_BBANDCFG_RXANT,
+ (autodiv ? B43_ANTENNA_AUTO1 : antenna) <<
+ B43_PHY_BBANDCFG_RXANT_SHIFT);
if (autodiv) {
tmp = b43_phy_read(dev, B43_PHY_ANTDWELL);
- if (antenna == B43_ANTENNA_AUTO0)
+ if (antenna == B43_ANTENNA_AUTO1)
tmp &= ~B43_PHY_ANTDWELL_AUTODIV1;
else
tmp |= B43_PHY_ANTDWELL_AUTODIV1;
b43_phy_write(dev, B43_PHY_ANTDWELL, tmp);
}
+
tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT);
if (autodiv)
tmp |= B43_PHY_ANTWRSETT_ARXDIV;
else
tmp &= ~B43_PHY_ANTWRSETT_ARXDIV;
b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp);
+
+ if (autodiv)
+ b43_phy_set(dev, B43_PHY_ANTWRSETT, B43_PHY_ANTWRSETT_ARXDIV);
+ else {
+ b43_phy_mask(dev, B43_PHY_ANTWRSETT,
+ B43_PHY_ANTWRSETT_ARXDIV);
+ }
+
if (phy->rev >= 2) {
- tmp = b43_phy_read(dev, B43_PHY_OFDM61);
- tmp |= B43_PHY_OFDM61_10;
- b43_phy_write(dev, B43_PHY_OFDM61, tmp);
+ b43_phy_set(dev, B43_PHY_OFDM61, B43_PHY_OFDM61_10);
+ b43_phy_maskset(dev, B43_PHY_DIVSRCHGAINBACK, 0xFF00, 0x15);
- tmp =
- b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK);
- tmp = (tmp & 0xFF00) | 0x15;
- b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK,
- tmp);
-
- if (phy->rev == 2) {
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- 8);
- } else {
- tmp =
- b43_phy_read(dev,
- B43_PHY_ADIVRELATED);
- tmp = (tmp & 0xFF00) | 8;
- b43_phy_write(dev, B43_PHY_ADIVRELATED,
- tmp);
- }
+ if (phy->rev == 2)
+ b43_phy_write(dev, B43_PHY_ADIVRELATED, 8);
+ else
+ b43_phy_maskset(dev, B43_PHY_ADIVRELATED, 0xFF00, 8);
}
if (phy->rev >= 6)
b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC);
- hf |= B43_HF_ANTDIVHELP;
- b43_hf_write(dev, hf);
+ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP);
}
static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev,
@@ -2834,8 +2823,6 @@
b43_mac_suspend(dev);
- spin_lock_irq(&dev->wl->irq_lock);
-
/* Calculate the new attenuation values. */
bbatt = gphy->bbatt.att;
bbatt += gphy->bbatt_delta;
@@ -2875,11 +2862,6 @@
gphy->rfatt.att = rfatt;
gphy->bbatt.att = bbatt;
- /* We drop the lock early, so we can sleep during hardware
- * adjustment. Possible races with op_recalc_txpower are harmless,
- * as we will be called once again in case we raced. */
- spin_unlock_irq(&dev->wl->irq_lock);
-
if (b43_debug(dev, B43_DBG_XMITPOWER))
b43dbg(dev->wl, "Adjusting TX power\n");
diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h
index 718947f..8569fdd 100644
--- a/drivers/net/wireless/b43/phy_g.h
+++ b/drivers/net/wireless/b43/phy_g.h
@@ -141,8 +141,7 @@
int tgt_idle_tssi;
/* Current idle TSSI */
int cur_idle_tssi;
- /* The current average TSSI.
- * Needs irq_lock, as it's updated in the IRQ path. */
+ /* The current average TSSI. */
u8 average_tssi;
/* Current TX power level attenuation control values */
struct b43_bbatt bbatt;
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index ea0d3a3..3e02d96 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -1,9 +1,10 @@
/*
Broadcom B43 wireless driver
- IEEE 802.11g LP-PHY driver
+ IEEE 802.11a/g LP-PHY driver
Copyright (c) 2008-2009 Michael Buesch <mb@bu3sch.de>
+ Copyright (c) 2009 Gábor Stefanik <netrolller.3d@gmail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -29,6 +30,25 @@
#include "tables_lpphy.h"
+static inline u16 channel2freq_lp(u8 channel)
+{
+ if (channel < 14)
+ return (2407 + 5 * channel);
+ else if (channel == 14)
+ return 2484;
+ else if (channel < 184)
+ return (5000 + 5 * channel);
+ else
+ return (4000 + 5 * channel);
+}
+
+static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
+{
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ return 1;
+ return 36;
+}
+
static int b43_lpphy_op_allocate(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy;
@@ -59,14 +79,325 @@
dev->phy.lp = NULL;
}
+static void lpphy_read_band_sprom(struct b43_wldev *dev)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ struct ssb_bus *bus = dev->dev->bus;
+ u16 cckpo, maxpwr;
+ u32 ofdmpo;
+ int i;
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ lpphy->tx_isolation_med_band = bus->sprom.tri2g;
+ lpphy->bx_arch = bus->sprom.bxa2g;
+ lpphy->rx_pwr_offset = bus->sprom.rxpo2g;
+ lpphy->rssi_vf = bus->sprom.rssismf2g;
+ lpphy->rssi_vc = bus->sprom.rssismc2g;
+ lpphy->rssi_gs = bus->sprom.rssisav2g;
+ lpphy->txpa[0] = bus->sprom.pa0b0;
+ lpphy->txpa[1] = bus->sprom.pa0b1;
+ lpphy->txpa[2] = bus->sprom.pa0b2;
+ maxpwr = bus->sprom.maxpwr_bg;
+ lpphy->max_tx_pwr_med_band = maxpwr;
+ cckpo = bus->sprom.cck2gpo;
+ ofdmpo = bus->sprom.ofdm2gpo;
+ if (cckpo) {
+ for (i = 0; i < 4; i++) {
+ lpphy->tx_max_rate[i] =
+ maxpwr - (ofdmpo & 0xF) * 2;
+ ofdmpo >>= 4;
+ }
+ ofdmpo = bus->sprom.ofdm2gpo;
+ for (i = 4; i < 15; i++) {
+ lpphy->tx_max_rate[i] =
+ maxpwr - (ofdmpo & 0xF) * 2;
+ ofdmpo >>= 4;
+ }
+ } else {
+ ofdmpo &= 0xFF;
+ for (i = 0; i < 4; i++)
+ lpphy->tx_max_rate[i] = maxpwr;
+ for (i = 4; i < 15; i++)
+ lpphy->tx_max_rate[i] = maxpwr - ofdmpo;
+ }
+ } else { /* 5GHz */
+ lpphy->tx_isolation_low_band = bus->sprom.tri5gl;
+ lpphy->tx_isolation_med_band = bus->sprom.tri5g;
+ lpphy->tx_isolation_hi_band = bus->sprom.tri5gh;
+ lpphy->bx_arch = bus->sprom.bxa5g;
+ lpphy->rx_pwr_offset = bus->sprom.rxpo5g;
+ lpphy->rssi_vf = bus->sprom.rssismf5g;
+ lpphy->rssi_vc = bus->sprom.rssismc5g;
+ lpphy->rssi_gs = bus->sprom.rssisav5g;
+ lpphy->txpa[0] = bus->sprom.pa1b0;
+ lpphy->txpa[1] = bus->sprom.pa1b1;
+ lpphy->txpa[2] = bus->sprom.pa1b2;
+ lpphy->txpal[0] = bus->sprom.pa1lob0;
+ lpphy->txpal[1] = bus->sprom.pa1lob1;
+ lpphy->txpal[2] = bus->sprom.pa1lob2;
+ lpphy->txpah[0] = bus->sprom.pa1hib0;
+ lpphy->txpah[1] = bus->sprom.pa1hib1;
+ lpphy->txpah[2] = bus->sprom.pa1hib2;
+ maxpwr = bus->sprom.maxpwr_al;
+ ofdmpo = bus->sprom.ofdm5glpo;
+ lpphy->max_tx_pwr_low_band = maxpwr;
+ for (i = 4; i < 12; i++) {
+ lpphy->tx_max_ratel[i] = maxpwr - (ofdmpo & 0xF) * 2;
+ ofdmpo >>= 4;
+ }
+ maxpwr = bus->sprom.maxpwr_a;
+ ofdmpo = bus->sprom.ofdm5gpo;
+ lpphy->max_tx_pwr_med_band = maxpwr;
+ for (i = 4; i < 12; i++) {
+ lpphy->tx_max_rate[i] = maxpwr - (ofdmpo & 0xF) * 2;
+ ofdmpo >>= 4;
+ }
+ maxpwr = bus->sprom.maxpwr_ah;
+ ofdmpo = bus->sprom.ofdm5ghpo;
+ lpphy->max_tx_pwr_hi_band = maxpwr;
+ for (i = 4; i < 12; i++) {
+ lpphy->tx_max_rateh[i] = maxpwr - (ofdmpo & 0xF) * 2;
+ ofdmpo >>= 4;
+ }
+ }
+}
+
+static void lpphy_adjust_gain_table(struct b43_wldev *dev, u32 freq)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ u16 temp[3];
+ u16 isolation;
+
+ B43_WARN_ON(dev->phy.rev >= 2);
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ isolation = lpphy->tx_isolation_med_band;
+ else if (freq <= 5320)
+ isolation = lpphy->tx_isolation_low_band;
+ else if (freq <= 5700)
+ isolation = lpphy->tx_isolation_med_band;
+ else
+ isolation = lpphy->tx_isolation_hi_band;
+
+ temp[0] = ((isolation - 26) / 12) << 12;
+ temp[1] = temp[0] + 0x1000;
+ temp[2] = temp[0] + 0x2000;
+
+ b43_lptab_write_bulk(dev, B43_LPTAB16(13, 0), 3, temp);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(12, 0), 3, temp);
+}
+
static void lpphy_table_init(struct b43_wldev *dev)
{
- //TODO
+ u32 freq = channel2freq_lp(b43_lpphy_op_get_default_chan(dev));
+
+ if (dev->phy.rev < 2)
+ lpphy_rev0_1_table_init(dev);
+ else
+ lpphy_rev2plus_table_init(dev);
+
+ lpphy_init_tx_gain_table(dev);
+
+ if (dev->phy.rev < 2)
+ lpphy_adjust_gain_table(dev, freq);
}
static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
{
- B43_WARN_ON(1);//TODO rev < 2 not supported, yet.
+ struct ssb_bus *bus = dev->dev->bus;
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ u16 tmp, tmp2;
+
+ b43_phy_mask(dev, B43_LPPHY_AFE_DAC_CTL, 0xF7FF);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
+ b43_phy_set(dev, B43_LPPHY_AFE_DAC_CTL, 0x0004);
+ b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x0078);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
+ b43_phy_write(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x0016);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_0, 0xFFF8, 0x0004);
+ b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5400);
+ b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2400);
+ b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
+ b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0x0006);
+ b43_phy_mask(dev, B43_LPPHY_RX_RADIO_CTL, 0xFFFE);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x0005);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFC1F, 0x0180);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x3C00);
+ b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFFF0, 0x0005);
+ b43_phy_maskset(dev, B43_LPPHY_GAIN_MISMATCH_LIMIT, 0xFFC0, 0x001A);
+ b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0x00B3);
+ b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
+ b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB,
+ 0xFF00, lpphy->rx_pwr_offset);
+ if ((bus->sprom.boardflags_lo & B43_BFL_FEM) &&
+ ((b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
+ (bus->sprom.boardflags_hi & B43_BFH_PAREF))) {
+ ssb_pmu_set_ldo_voltage(&bus->chipco, LDO_PAREF, 0x28);
+ ssb_pmu_set_ldo_paref(&bus->chipco, true);
+ if (dev->phy.rev == 0) {
+ b43_phy_maskset(dev, B43_LPPHY_LP_RF_SIGNAL_LUT,
+ 0xFFCF, 0x0010);
+ }
+ b43_lptab_write(dev, B43_LPTAB16(11, 7), 60);
+ } else {
+ ssb_pmu_set_ldo_paref(&bus->chipco, false);
+ b43_phy_maskset(dev, B43_LPPHY_LP_RF_SIGNAL_LUT,
+ 0xFFCF, 0x0020);
+ b43_lptab_write(dev, B43_LPTAB16(11, 7), 100);
+ }
+ tmp = lpphy->rssi_vf | lpphy->rssi_vc << 4 | 0xA000;
+ b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, tmp);
+ if (bus->sprom.boardflags_hi & B43_BFH_RSSIINV)
+ b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x0AAA);
+ else
+ b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x02AA);
+ b43_lptab_write(dev, B43_LPTAB16(11, 1), 24);
+ b43_phy_maskset(dev, B43_LPPHY_RX_RADIO_CTL,
+ 0xFFF9, (lpphy->bx_arch << 1));
+ if (dev->phy.rev == 1 &&
+ (bus->sprom.boardflags_hi & B43_BFH_FEM_BT)) {
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0x3F00, 0x0900);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0B00);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0400);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0B00);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_5, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_5, 0xC0FF, 0x0900);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_6, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_6, 0xC0FF, 0x0B00);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_7, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_7, 0xC0FF, 0x0900);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
+ } else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
+ (bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) &&
+ (bus->sprom.boardflags_lo & B43_BFL_FEM))) {
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0500);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0002);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0800);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0A00);
+ } else if (dev->phy.rev == 1 ||
+ (bus->sprom.boardflags_lo & B43_BFL_FEM)) {
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0004);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0800);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0004);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0C00);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0002);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0100);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0300);
+ } else {
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0900);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xC0FF, 0x0B00);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xFFC0, 0x0006);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_3, 0xC0FF, 0x0500);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0006);
+ b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0700);
+ }
+ if (dev->phy.rev == 1 && (bus->sprom.boardflags_hi & B43_BFH_PAREF)) {
+ b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_5, B43_LPPHY_TR_LOOKUP_1);
+ b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_6, B43_LPPHY_TR_LOOKUP_2);
+ b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_7, B43_LPPHY_TR_LOOKUP_3);
+ b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_8, B43_LPPHY_TR_LOOKUP_4);
+ }
+ if ((bus->sprom.boardflags_hi & B43_BFH_FEM_BT) &&
+ (bus->chip_id == 0x5354) &&
+ (bus->chip_package == SSB_CHIPPACK_BCM4712S)) {
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);
+ b43_phy_write(dev, B43_LPPHY_GPIO_SELECT, 0x0005);
+ b43_phy_write(dev, B43_LPPHY_GPIO_OUTEN, 0xFFFF);
+ //FIXME the Broadcom driver caches & delays this HF write!
+ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_PR45960W);
+ }
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ b43_phy_set(dev, B43_LPPHY_LP_PHY_CTL, 0x8000);
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0040);
+ b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0xA400);
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0x0B00);
+ b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x0007);
+ b43_phy_maskset(dev, B43_LPPHY_DSSS_CONFIRM_CNT, 0xFFF8, 0x0003);
+ b43_phy_maskset(dev, B43_LPPHY_DSSS_CONFIRM_CNT, 0xFFC7, 0x0020);
+ b43_phy_mask(dev, B43_LPPHY_IDLEAFTERPKTRXTO, 0x00FF);
+ } else { /* 5GHz */
+ b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0x7FFF);
+ b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFBF);
+ }
+ if (dev->phy.rev == 1) {
+ tmp = b43_phy_read(dev, B43_LPPHY_CLIPCTRTHRESH);
+ tmp2 = (tmp & 0x03E0) >> 5;
+ tmp2 |= tmp2 << 5;
+ b43_phy_write(dev, B43_LPPHY_4C3, tmp2);
+ tmp = b43_phy_read(dev, B43_LPPHY_GAINDIRECTMISMATCH);
+ tmp2 = (tmp & 0x1F00) >> 8;
+ tmp2 |= tmp2 << 5;
+ b43_phy_write(dev, B43_LPPHY_4C4, tmp2);
+ tmp = b43_phy_read(dev, B43_LPPHY_VERYLOWGAINDB);
+ tmp2 = tmp & 0x00FF;
+ tmp2 |= tmp << 8;
+ b43_phy_write(dev, B43_LPPHY_4C5, tmp2);
+ }
+}
+
+static void lpphy_save_dig_flt_state(struct b43_wldev *dev)
+{
+ static const u16 addr[] = {
+ B43_PHY_OFDM(0xC1),
+ B43_PHY_OFDM(0xC2),
+ B43_PHY_OFDM(0xC3),
+ B43_PHY_OFDM(0xC4),
+ B43_PHY_OFDM(0xC5),
+ B43_PHY_OFDM(0xC6),
+ B43_PHY_OFDM(0xC7),
+ B43_PHY_OFDM(0xC8),
+ B43_PHY_OFDM(0xCF),
+ };
+
+ static const u16 coefs[] = {
+ 0xDE5E, 0xE832, 0xE331, 0x4D26,
+ 0x0026, 0x1420, 0x0020, 0xFE08,
+ 0x0008,
+ };
+
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(addr); i++) {
+ lpphy->dig_flt_state[i] = b43_phy_read(dev, addr[i]);
+ b43_phy_write(dev, addr[i], coefs[i]);
+ }
+}
+
+static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
+{
+ static const u16 addr[] = {
+ B43_PHY_OFDM(0xC1),
+ B43_PHY_OFDM(0xC2),
+ B43_PHY_OFDM(0xC3),
+ B43_PHY_OFDM(0xC4),
+ B43_PHY_OFDM(0xC5),
+ B43_PHY_OFDM(0xC6),
+ B43_PHY_OFDM(0xC7),
+ B43_PHY_OFDM(0xC8),
+ B43_PHY_OFDM(0xCF),
+ };
+
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(addr); i++)
+ b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]);
}
static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
@@ -83,7 +414,7 @@
b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
- b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
+ b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0xB4);
b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
@@ -91,7 +422,12 @@
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
- b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
+ if (bus->boardinfo.rev >= 0x18) {
+ b43_lptab_write(dev, B43_LPTAB32(17, 65), 0xEC);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x14);
+ } else {
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
+ }
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
@@ -100,7 +436,7 @@
b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
- b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFC1F, 0xA0);
b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
@@ -121,8 +457,10 @@
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
- b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
- b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
+ b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
+ b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
+ }
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
@@ -130,6 +468,7 @@
b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
+ b43_phy_mask(dev, B43_LPPHY_IDLEAFTERPKTRXTO, 0x00FF);
} else /* 5GHz */
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);
@@ -142,6 +481,14 @@
b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
0x2000 | ((u16)lpphy->rssi_gs << 10) |
((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
+
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
+ b43_phy_set(dev, B43_LPPHY_AFE_ADC_CTL_0, 0x1C);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_CTL, 0x00FF, 0x8800);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_1, 0xFC3C, 0x0400);
+ }
+
+ lpphy_save_dig_flt_state(dev);
}
static void lpphy_baseband_init(struct b43_wldev *dev)
@@ -161,8 +508,9 @@
/* Initialize the 2062 radio. */
static void lpphy_2062_init(struct b43_wldev *dev)
{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
struct ssb_bus *bus = dev->dev->bus;
- u32 crystalfreq, pdiv, tmp, ref;
+ u32 crystalfreq, tmp, ref;
unsigned int i;
const struct b2062_freqdata *fd = NULL;
@@ -186,10 +534,15 @@
b43_radio_write(dev, B2062_N_TX_CTL3, 0);
b43_radio_write(dev, B2062_N_TX_CTL4, 0);
b43_radio_write(dev, B2062_N_TX_CTL5, 0);
+ b43_radio_write(dev, B2062_N_TX_CTL6, 0);
b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40);
b43_radio_write(dev, B2062_N_PDN_CTL0, 0);
b43_radio_write(dev, B2062_N_CALIB_TS, 0x10);
b43_radio_write(dev, B2062_N_CALIB_TS, 0);
+ if (dev->phy.rev > 0) {
+ b43_radio_write(dev, B2062_S_BG_CTL1,
+ (b43_radio_read(dev, B2062_N_COMM2) >> 1) | 0x80);
+ }
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1);
else
@@ -201,23 +554,27 @@
B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU));
B43_WARN_ON(crystalfreq == 0);
- if (crystalfreq >= 30000000) {
- pdiv = 1;
+ if (crystalfreq <= 30000000) {
+ lpphy->pdiv = 1;
b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB);
} else {
- pdiv = 2;
+ lpphy->pdiv = 2;
b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4);
}
- tmp = (800000000 * pdiv + crystalfreq) / (32000000 * pdiv);
- tmp = (tmp - 1) & 0xFF;
+ tmp = (((800000000 * lpphy->pdiv + crystalfreq) /
+ (2 * crystalfreq)) - 8) & 0xFF;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL7, tmp);
+
+ tmp = (((100 * crystalfreq + 16000000 * lpphy->pdiv) /
+ (32000000 * lpphy->pdiv)) - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp);
- tmp = (2 * crystalfreq + 1000000 * pdiv) / (2000000 * pdiv);
- tmp = ((tmp & 0xFF) - 1) & 0xFFFF;
+ tmp = (((2 * crystalfreq + 1000000 * lpphy->pdiv) /
+ (2000000 * lpphy->pdiv)) - 1) & 0xFF;
b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp);
- ref = (1000 * pdiv + 2 * crystalfreq) / (2000 * pdiv);
+ ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv);
ref &= 0xFFFF;
for (i = 0; i < ARRAY_SIZE(freqdata_tab); i++) {
if (ref < freqdata_tab[i].freq) {
@@ -241,12 +598,78 @@
/* Initialize the 2063 radio. */
static void lpphy_2063_init(struct b43_wldev *dev)
{
- //TODO
+ b2063_upload_init_table(dev);
+ b43_radio_write(dev, B2063_LOGEN_SP5, 0);
+ b43_radio_set(dev, B2063_COMM8, 0x38);
+ b43_radio_write(dev, B2063_REG_SP1, 0x56);
+ b43_radio_mask(dev, B2063_RX_BB_CTL2, ~0x2);
+ b43_radio_write(dev, B2063_PA_SP7, 0);
+ b43_radio_write(dev, B2063_TX_RF_SP6, 0x20);
+ b43_radio_write(dev, B2063_TX_RF_SP9, 0x40);
+ if (dev->phy.rev == 2) {
+ b43_radio_write(dev, B2063_PA_SP3, 0xa0);
+ b43_radio_write(dev, B2063_PA_SP4, 0xa0);
+ b43_radio_write(dev, B2063_PA_SP2, 0x18);
+ } else {
+ b43_radio_write(dev, B2063_PA_SP3, 0x20);
+ b43_radio_write(dev, B2063_PA_SP2, 0x20);
+ }
}
+struct lpphy_stx_table_entry {
+ u16 phy_offset;
+ u16 phy_shift;
+ u16 rf_addr;
+ u16 rf_shift;
+ u16 mask;
+};
+
+static const struct lpphy_stx_table_entry lpphy_stx_table[] = {
+ { .phy_offset = 2, .phy_shift = 6, .rf_addr = 0x3d, .rf_shift = 3, .mask = 0x01, },
+ { .phy_offset = 1, .phy_shift = 12, .rf_addr = 0x4c, .rf_shift = 1, .mask = 0x01, },
+ { .phy_offset = 1, .phy_shift = 8, .rf_addr = 0x50, .rf_shift = 0, .mask = 0x7f, },
+ { .phy_offset = 0, .phy_shift = 8, .rf_addr = 0x44, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 1, .phy_shift = 0, .rf_addr = 0x4a, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 0, .phy_shift = 4, .rf_addr = 0x4d, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 1, .phy_shift = 4, .rf_addr = 0x4e, .rf_shift = 0, .mask = 0xff, },
+ { .phy_offset = 0, .phy_shift = 12, .rf_addr = 0x4f, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 1, .phy_shift = 0, .rf_addr = 0x4f, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 3, .phy_shift = 0, .rf_addr = 0x49, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 4, .phy_shift = 3, .rf_addr = 0x46, .rf_shift = 4, .mask = 0x07, },
+ { .phy_offset = 3, .phy_shift = 15, .rf_addr = 0x46, .rf_shift = 0, .mask = 0x01, },
+ { .phy_offset = 4, .phy_shift = 0, .rf_addr = 0x46, .rf_shift = 1, .mask = 0x07, },
+ { .phy_offset = 3, .phy_shift = 8, .rf_addr = 0x48, .rf_shift = 4, .mask = 0x07, },
+ { .phy_offset = 3, .phy_shift = 11, .rf_addr = 0x48, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 3, .phy_shift = 4, .rf_addr = 0x49, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 2, .phy_shift = 15, .rf_addr = 0x45, .rf_shift = 0, .mask = 0x01, },
+ { .phy_offset = 5, .phy_shift = 13, .rf_addr = 0x52, .rf_shift = 4, .mask = 0x07, },
+ { .phy_offset = 6, .phy_shift = 0, .rf_addr = 0x52, .rf_shift = 7, .mask = 0x01, },
+ { .phy_offset = 5, .phy_shift = 3, .rf_addr = 0x41, .rf_shift = 5, .mask = 0x07, },
+ { .phy_offset = 5, .phy_shift = 6, .rf_addr = 0x41, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 5, .phy_shift = 10, .rf_addr = 0x42, .rf_shift = 5, .mask = 0x07, },
+ { .phy_offset = 4, .phy_shift = 15, .rf_addr = 0x42, .rf_shift = 0, .mask = 0x01, },
+ { .phy_offset = 5, .phy_shift = 0, .rf_addr = 0x42, .rf_shift = 1, .mask = 0x07, },
+ { .phy_offset = 4, .phy_shift = 11, .rf_addr = 0x43, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 4, .phy_shift = 7, .rf_addr = 0x43, .rf_shift = 0, .mask = 0x0f, },
+ { .phy_offset = 4, .phy_shift = 6, .rf_addr = 0x45, .rf_shift = 1, .mask = 0x01, },
+ { .phy_offset = 2, .phy_shift = 7, .rf_addr = 0x40, .rf_shift = 4, .mask = 0x0f, },
+ { .phy_offset = 2, .phy_shift = 11, .rf_addr = 0x40, .rf_shift = 0, .mask = 0x0f, },
+};
+
static void lpphy_sync_stx(struct b43_wldev *dev)
{
- //TODO
+ const struct lpphy_stx_table_entry *e;
+ unsigned int i;
+ u16 tmp;
+
+ for (i = 0; i < ARRAY_SIZE(lpphy_stx_table); i++) {
+ e = &lpphy_stx_table[i];
+ tmp = b43_radio_read(dev, e->rf_addr);
+ tmp >>= e->rf_shift;
+ tmp <<= e->phy_shift;
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xF2 + e->phy_offset),
+ ~(e->mask << e->phy_shift), tmp);
+ }
}
static void lpphy_radio_init(struct b43_wldev *dev)
@@ -257,17 +680,381 @@
b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD);
udelay(1);
- if (dev->phy.rev < 2) {
+ if (dev->phy.radio_ver == 0x2062) {
lpphy_2062_init(dev);
} else {
lpphy_2063_init(dev);
lpphy_sync_stx(dev);
b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80);
b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0);
- //TODO Do something on the backplane
+ if (dev->dev->bus->chip_id == 0x4325) {
+ // TODO SSB PMU recalibration
+ }
}
}
+struct lpphy_iq_est { u32 iq_prod, i_pwr, q_pwr; };
+
+static void lpphy_set_rc_cap(struct b43_wldev *dev)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+
+ u8 rc_cap = (lpphy->rc_cap & 0x1F) >> 1;
+
+ if (dev->phy.rev == 1) //FIXME check channel 14!
+ rc_cap = min_t(u8, rc_cap + 5, 15);
+
+ b43_radio_write(dev, B2062_N_RXBB_CALIB2,
+ max_t(u8, lpphy->rc_cap - 4, 0x80));
+ b43_radio_write(dev, B2062_N_TX_CTL_A, rc_cap | 0x80);
+ b43_radio_write(dev, B2062_S_RXG_CNT16,
+ ((lpphy->rc_cap & 0x1F) >> 2) | 0x80);
+}
+
+static u8 lpphy_get_bb_mult(struct b43_wldev *dev)
+{
+ return (b43_lptab_read(dev, B43_LPTAB16(0, 87)) & 0xFF00) >> 8;
+}
+
+static void lpphy_set_bb_mult(struct b43_wldev *dev, u8 bb_mult)
+{
+ b43_lptab_write(dev, B43_LPTAB16(0, 87), (u16)bb_mult << 8);
+}
+
+static void lpphy_set_deaf(struct b43_wldev *dev, bool user)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+
+ if (user)
+ lpphy->crs_usr_disable = 1;
+ else
+ lpphy->crs_sys_disable = 1;
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFF1F, 0x80);
+}
+
+static void lpphy_clear_deaf(struct b43_wldev *dev, bool user)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+
+ if (user)
+ lpphy->crs_usr_disable = 0;
+ else
+ lpphy->crs_sys_disable = 0;
+
+ if (!lpphy->crs_usr_disable && !lpphy->crs_sys_disable) {
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL,
+ 0xFF1F, 0x60);
+ else
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL,
+ 0xFF1F, 0x20);
+ }
+}
+
+static void lpphy_disable_crs(struct b43_wldev *dev, bool user)
+{
+ lpphy_set_deaf(dev, user);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x1);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFB);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x4);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFF7);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x10);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFDF);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x20);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFBF);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0x7);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0x38);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFF3F);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0x100);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFDFF);
+ b43_phy_write(dev, B43_LPPHY_PS_CTL_OVERRIDE_VAL0, 0);
+ b43_phy_write(dev, B43_LPPHY_PS_CTL_OVERRIDE_VAL1, 1);
+ b43_phy_write(dev, B43_LPPHY_PS_CTL_OVERRIDE_VAL2, 0x20);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFBFF);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xF7FF);
+ b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL, 0);
+ b43_phy_write(dev, B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL, 0x45AF);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0x3FF);
+}
+
+static void lpphy_restore_crs(struct b43_wldev *dev, bool user)
+{
+ lpphy_clear_deaf(dev, user);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFF80);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFC00);
+}
+
+struct lpphy_tx_gains { u16 gm, pga, pad, dac; };
+
+static struct lpphy_tx_gains lpphy_get_tx_gains(struct b43_wldev *dev)
+{
+ struct lpphy_tx_gains gains;
+ u16 tmp;
+
+ gains.dac = (b43_phy_read(dev, B43_LPPHY_AFE_DAC_CTL) & 0x380) >> 7;
+ if (dev->phy.rev < 2) {
+ tmp = b43_phy_read(dev,
+ B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL) & 0x7FF;
+ gains.gm = tmp & 0x0007;
+ gains.pga = (tmp & 0x0078) >> 3;
+ gains.pad = (tmp & 0x780) >> 7;
+ } else {
+ tmp = b43_phy_read(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL);
+ gains.pad = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0xFF;
+ gains.gm = tmp & 0xFF;
+ gains.pga = (tmp >> 8) & 0xFF;
+ }
+
+ return gains;
+}
+
+static void lpphy_set_dac_gain(struct b43_wldev *dev, u16 dac)
+{
+ u16 ctl = b43_phy_read(dev, B43_LPPHY_AFE_DAC_CTL) & 0xC7F;
+ ctl |= dac << 7;
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DAC_CTL, 0xF000, ctl);
+}
+
+static void lpphy_set_tx_gains(struct b43_wldev *dev,
+ struct lpphy_tx_gains gains)
+{
+ u16 rf_gain, pa_gain;
+
+ if (dev->phy.rev < 2) {
+ rf_gain = (gains.pad << 7) | (gains.pga << 3) | gains.gm;
+ b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+ 0xF800, rf_gain);
+ } else {
+ pa_gain = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x1FC0;
+ pa_gain <<= 2;
+ b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+ (gains.pga << 8) | gains.gm);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFB),
+ 0x8000, gains.pad | pa_gain);
+ b43_phy_write(dev, B43_PHY_OFDM(0xFC),
+ (gains.pga << 8) | gains.gm);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFD),
+ 0x8000, gains.pad | pa_gain);
+ }
+ lpphy_set_dac_gain(dev, gains.dac);
+ if (dev->phy.rev < 2) {
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF, 1 << 8);
+ } else {
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F, 1 << 7);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF, 1 << 14);
+ }
+ b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF, 1 << 6);
+}
+
+static void lpphy_rev0_1_set_rx_gain(struct b43_wldev *dev, u32 gain)
+{
+ u16 trsw = gain & 0x1;
+ u16 lna = (gain & 0xFFFC) | ((gain & 0xC) >> 2);
+ u16 ext_lna = (gain & 2) >> 1;
+
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFE, trsw);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL,
+ 0xFBFF, ext_lna << 10);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL,
+ 0xF7FF, ext_lna << 11);
+ b43_phy_write(dev, B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL, lna);
+}
+
+static void lpphy_rev2plus_set_rx_gain(struct b43_wldev *dev, u32 gain)
+{
+ u16 low_gain = gain & 0xFFFF;
+ u16 high_gain = (gain >> 16) & 0xF;
+ u16 ext_lna = (gain >> 21) & 0x1;
+ u16 trsw = ~(gain >> 20) & 0x1;
+ u16 tmp;
+
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFE, trsw);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL,
+ 0xFDFF, ext_lna << 9);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL,
+ 0xFBFF, ext_lna << 10);
+ b43_phy_write(dev, B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL, low_gain);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFFF0, high_gain);
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ tmp = (gain >> 2) & 0x3;
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL,
+ 0xE7FF, tmp<<11);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xE6), 0xFFE7, tmp << 3);
+ }
+}
+
+static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
+{
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF);
+ if (dev->phy.rev >= 2) {
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF);
+ b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7);
+ }
+ } else {
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
+ }
+}
+
+static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
+{
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
+ if (dev->phy.rev >= 2) {
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400);
+ b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8);
+ }
+ } else {
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200);
+ }
+}
+
+static void lpphy_set_rx_gain(struct b43_wldev *dev, u32 gain)
+{
+ if (dev->phy.rev < 2)
+ lpphy_rev0_1_set_rx_gain(dev, gain);
+ else
+ lpphy_rev2plus_set_rx_gain(dev, gain);
+ lpphy_enable_rx_gain_override(dev);
+}
+
+static void lpphy_set_rx_gain_by_index(struct b43_wldev *dev, u16 idx)
+{
+ u32 gain = b43_lptab_read(dev, B43_LPTAB16(12, idx));
+ lpphy_set_rx_gain(dev, gain);
+}
+
+static void lpphy_stop_ddfs(struct b43_wldev *dev)
+{
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0xFFFD);
+ b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0xFFDF);
+}
+
+static void lpphy_run_ddfs(struct b43_wldev *dev, int i_on, int q_on,
+ int incr1, int incr2, int scale_idx)
+{
+ lpphy_stop_ddfs(dev);
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0xFF80);
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0x80FF);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0xFF80, incr1);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0x80FF, incr2 << 8);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFFF7, i_on << 3);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFFEF, q_on << 4);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFF9F, scale_idx << 5);
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0xFFFB);
+ b43_phy_set(dev, B43_LPPHY_AFE_DDFS, 0x2);
+ b43_phy_set(dev, B43_LPPHY_LP_PHY_CTL, 0x20);
+}
+
+static bool lpphy_rx_iq_est(struct b43_wldev *dev, u16 samples, u8 time,
+ struct lpphy_iq_est *iq_est)
+{
+ int i;
+
+ b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFF7);
+ b43_phy_write(dev, B43_LPPHY_IQ_NUM_SMPLS_ADDR, samples);
+ b43_phy_maskset(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR, 0xFF00, time);
+ b43_phy_mask(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR, 0xFEFF);
+ b43_phy_set(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR, 0x200);
+
+ for (i = 0; i < 500; i++) {
+ if (!(b43_phy_read(dev,
+ B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR) & 0x200))
+ break;
+ msleep(1);
+ }
+
+ if ((b43_phy_read(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR) & 0x200)) {
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x8);
+ return false;
+ }
+
+ iq_est->iq_prod = b43_phy_read(dev, B43_LPPHY_IQ_ACC_HI_ADDR);
+ iq_est->iq_prod <<= 16;
+ iq_est->iq_prod |= b43_phy_read(dev, B43_LPPHY_IQ_ACC_LO_ADDR);
+
+ iq_est->i_pwr = b43_phy_read(dev, B43_LPPHY_IQ_I_PWR_ACC_HI_ADDR);
+ iq_est->i_pwr <<= 16;
+ iq_est->i_pwr |= b43_phy_read(dev, B43_LPPHY_IQ_I_PWR_ACC_LO_ADDR);
+
+ iq_est->q_pwr = b43_phy_read(dev, B43_LPPHY_IQ_Q_PWR_ACC_HI_ADDR);
+ iq_est->q_pwr <<= 16;
+ iq_est->q_pwr |= b43_phy_read(dev, B43_LPPHY_IQ_Q_PWR_ACC_LO_ADDR);
+
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x8);
+ return true;
+}
+
+static int lpphy_loopback(struct b43_wldev *dev)
+{
+ struct lpphy_iq_est iq_est;
+ int i, index = -1;
+ u32 tmp;
+
+ memset(&iq_est, 0, sizeof(iq_est));
+
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x3);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 1);
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x800);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x8);
+ b43_radio_write(dev, B2062_N_TX_CTL_A, 0x80);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x80);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x80);
+ for (i = 0; i < 32; i++) {
+ lpphy_set_rx_gain_by_index(dev, i);
+ lpphy_run_ddfs(dev, 1, 1, 5, 5, 0);
+ if (!(lpphy_rx_iq_est(dev, 1000, 32, &iq_est)))
+ continue;
+ tmp = (iq_est.i_pwr + iq_est.q_pwr) / 1000;
+ if ((tmp > 4000) && (tmp < 10000)) {
+ index = i;
+ break;
+ }
+ }
+ lpphy_stop_ddfs(dev);
+ return index;
+}
+
+/* Fixed-point division algorithm using only integer math. */
+static u32 lpphy_qdiv_roundup(u32 dividend, u32 divisor, u8 precision)
+{
+ u32 quotient, remainder;
+
+ if (divisor == 0)
+ return 0;
+
+ quotient = dividend / divisor;
+ remainder = dividend % divisor;
+
+ while (precision > 0) {
+ quotient <<= 1;
+ if (remainder << 1 >= divisor) {
+ quotient++;
+ remainder = (remainder << 1) - divisor;
+ }
+ precision--;
+ }
+
+ if (remainder << 1 >= divisor)
+ quotient++;
+
+ return quotient;
+}
+
/* Read the TX power control mode from hardware. */
static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev)
{
@@ -322,9 +1109,9 @@
struct b43_phy_lp *lpphy = dev->phy.lp;
enum b43_lpphy_txpctl_mode oldmode;
- oldmode = lpphy->txpctl_mode;
lpphy_read_tx_pctl_mode_from_hardware(dev);
- if (lpphy->txpctl_mode == mode)
+ oldmode = lpphy->txpctl_mode;
+ if (oldmode == mode)
return;
lpphy->txpctl_mode = mode;
@@ -345,13 +1132,186 @@
}
if (dev->phy.rev >= 2) {
if (mode == B43_LPPHY_TXPCTL_HW)
- b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2);
+ b43_phy_set(dev, B43_PHY_OFDM(0xD0), 0x2);
else
- b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0);
+ b43_phy_mask(dev, B43_PHY_OFDM(0xD0), 0xFFFD);
}
lpphy_write_tx_pctl_mode_to_hardware(dev);
}
+static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel);
+
+static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ struct lpphy_iq_est iq_est;
+ struct lpphy_tx_gains tx_gains;
+ static const u32 ideal_pwr_table[21] = {
+ 0x10000, 0x10557, 0x10e2d, 0x113e0, 0x10f22, 0x0ff64,
+ 0x0eda2, 0x0e5d4, 0x0efd1, 0x0fbe8, 0x0b7b8, 0x04b35,
+ 0x01a5e, 0x00a0b, 0x00444, 0x001fd, 0x000ff, 0x00088,
+ 0x0004c, 0x0002c, 0x0001a,
+ };
+ bool old_txg_ovr;
+ u8 old_bbmult;
+ u16 old_rf_ovr, old_rf_ovrval, old_afe_ovr, old_afe_ovrval,
+ old_rf2_ovr, old_rf2_ovrval, old_phy_ctl;
+ enum b43_lpphy_txpctl_mode old_txpctl;
+ u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0;
+ int loopback, i, j, inner_sum, err;
+
+ memset(&iq_est, 0, sizeof(iq_est));
+
+ err = b43_lpphy_op_switch_channel(dev, 7);
+ if (err) {
+ b43dbg(dev->wl,
+ "RC calib: Failed to switch to channel 7, error = %d\n",
+ err);
+ }
+ old_txg_ovr = !!(b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40);
+ old_bbmult = lpphy_get_bb_mult(dev);
+ if (old_txg_ovr)
+ tx_gains = lpphy_get_tx_gains(dev);
+ old_rf_ovr = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_0);
+ old_rf_ovrval = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_VAL_0);
+ old_afe_ovr = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR);
+ old_afe_ovrval = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVRVAL);
+ old_rf2_ovr = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_2);
+ old_rf2_ovrval = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_2_VAL);
+ old_phy_ctl = b43_phy_read(dev, B43_LPPHY_LP_PHY_CTL);
+ lpphy_read_tx_pctl_mode_from_hardware(dev);
+ old_txpctl = lpphy->txpctl_mode;
+
+ lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+ lpphy_disable_crs(dev, true);
+ loopback = lpphy_loopback(dev);
+ if (loopback == -1)
+ goto finish;
+ lpphy_set_rx_gain_by_index(dev, loopback);
+ b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFFBF, 0x40);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFFF8, 0x1);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFFC7, 0x8);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFF3F, 0xC0);
+ for (i = 128; i <= 159; i++) {
+ b43_radio_write(dev, B2062_N_RXBB_CALIB2, i);
+ inner_sum = 0;
+ for (j = 5; j <= 25; j++) {
+ lpphy_run_ddfs(dev, 1, 1, j, j, 0);
+ if (!(lpphy_rx_iq_est(dev, 1000, 32, &iq_est)))
+ goto finish;
+ mean_sq_pwr = iq_est.i_pwr + iq_est.q_pwr;
+ if (j == 5)
+ tmp = mean_sq_pwr;
+ ideal_pwr = ((ideal_pwr_table[j-5] >> 3) + 1) >> 1;
+ normal_pwr = lpphy_qdiv_roundup(mean_sq_pwr, tmp, 12);
+ mean_sq_pwr = ideal_pwr - normal_pwr;
+ mean_sq_pwr *= mean_sq_pwr;
+ inner_sum += mean_sq_pwr;
+ if ((i == 128) || (inner_sum < mean_sq_pwr_min)) {
+ lpphy->rc_cap = i;
+ mean_sq_pwr_min = inner_sum;
+ }
+ }
+ }
+ lpphy_stop_ddfs(dev);
+
+finish:
+ lpphy_restore_crs(dev, true);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, old_rf_ovrval);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, old_rf_ovr);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, old_afe_ovrval);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, old_afe_ovr);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, old_rf2_ovrval);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, old_rf2_ovr);
+ b43_phy_write(dev, B43_LPPHY_LP_PHY_CTL, old_phy_ctl);
+
+ lpphy_set_bb_mult(dev, old_bbmult);
+ if (old_txg_ovr) {
+ /*
+ * SPEC FIXME: The specs say "get_tx_gains" here, which is
+ * illogical. According to lwfinger, vendor driver v4.150.10.5
+ * has a Set here, while v4.174.64.19 has a Get - regression in
+ * the vendor driver? This should be tested this once the code
+ * is testable.
+ */
+ lpphy_set_tx_gains(dev, tx_gains);
+ }
+ lpphy_set_tx_power_control(dev, old_txpctl);
+ if (lpphy->rc_cap)
+ lpphy_set_rc_cap(dev);
+}
+
+static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
+ u8 tmp = b43_radio_read(dev, B2063_RX_BB_SP8) & 0xFF;
+ int i;
+
+ b43_radio_write(dev, B2063_RX_BB_SP8, 0x0);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7E);
+ b43_radio_mask(dev, B2063_PLL_SP1, 0xF7);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7C);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL2, 0x15);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL3, 0x70);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL4, 0x52);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL5, 0x1);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7D);
+
+ for (i = 0; i < 10000; i++) {
+ if (b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2)
+ break;
+ msleep(1);
+ }
+
+ if (!(b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2))
+ b43_radio_write(dev, B2063_RX_BB_SP8, tmp);
+
+ tmp = b43_radio_read(dev, B2063_TX_BB_SP3) & 0xFF;
+
+ b43_radio_write(dev, B2063_TX_BB_SP3, 0x0);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7E);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7C);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL2, 0x55);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL3, 0x76);
+
+ if (crystal_freq == 24000000) {
+ b43_radio_write(dev, B2063_RC_CALIB_CTL4, 0xFC);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL5, 0x0);
+ } else {
+ b43_radio_write(dev, B2063_RC_CALIB_CTL4, 0x13);
+ b43_radio_write(dev, B2063_RC_CALIB_CTL5, 0x1);
+ }
+
+ b43_radio_write(dev, B2063_PA_SP7, 0x7D);
+
+ for (i = 0; i < 10000; i++) {
+ if (b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2)
+ break;
+ msleep(1);
+ }
+
+ if (!(b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2))
+ b43_radio_write(dev, B2063_TX_BB_SP3, tmp);
+
+ b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7E);
+}
+
+static void lpphy_calibrate_rc(struct b43_wldev *dev)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+
+ if (dev->phy.rev >= 2) {
+ lpphy_rev2plus_rc_calib(dev);
+ } else if (!lpphy->rc_cap) {
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ lpphy_rev0_1_rc_calib(dev);
+ } else {
+ lpphy_set_rc_cap(dev);
+ }
+}
+
static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
@@ -423,34 +1383,112 @@
b43_mac_enable(dev);
}
+static void lpphy_set_tssi_mux(struct b43_wldev *dev, enum tssi_mux_mode mode)
+{
+ if (mode != TSSI_MUX_EXT) {
+ b43_radio_set(dev, B2063_PA_SP1, 0x2);
+ b43_phy_set(dev, B43_PHY_OFDM(0xF3), 0x1000);
+ b43_radio_write(dev, B2063_PA_CTL10, 0x51);
+ if (mode == TSSI_MUX_POSTPA) {
+ b43_radio_mask(dev, B2063_PA_SP1, 0xFFFE);
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFC7);
+ } else {
+ b43_radio_maskset(dev, B2063_PA_SP1, 0xFFFE, 0x1);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVRVAL,
+ 0xFFC7, 0x20);
+ }
+ } else {
+ B43_WARN_ON(1);
+ }
+}
+
+static void lpphy_tx_pctl_init_hw(struct b43_wldev *dev)
+{
+ u16 tmp;
+ int i;
+
+ //SPEC TODO Call LP PHY Clear TX Power offsets
+ for (i = 0; i < 64; i++) {
+ if (dev->phy.rev >= 2)
+ b43_lptab_write(dev, B43_LPTAB32(7, i + 1), i);
+ else
+ b43_lptab_write(dev, B43_LPTAB32(10, i + 1), i);
+ }
+
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xFF00, 0xFF);
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0x8FFF, 0x5000);
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, 0xFFC0, 0x1F);
+ if (dev->phy.rev < 2) {
+ b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0xEFFF);
+ b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xDFFF, 0x2000);
+ } else {
+ b43_phy_mask(dev, B43_PHY_OFDM(0x103), 0xFFFE);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x103), 0xFFFB, 0x4);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x103), 0xFFEF, 0x10);
+ b43_radio_maskset(dev, B2063_IQ_CALIB_CTL2, 0xF3, 0x1);
+ lpphy_set_tssi_mux(dev, TSSI_MUX_POSTPA);
+ }
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, 0x7FFF, 0x8000);
+ b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xFF);
+ b43_phy_write(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xA);
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
+ (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE,
+ B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF);
+ b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xF8FF);
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,
+ (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE,
+ B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW);
+
+ if (dev->phy.rev < 2) {
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_0, 0xEFFF, 0x1000);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xEFFF);
+ } else {
+ lpphy_set_tx_power_by_index(dev, 0x7F);
+ }
+
+ b43_dummy_transmission(dev, true, true);
+
+ tmp = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_STAT);
+ if (tmp & 0x8000) {
+ b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI,
+ 0xFFC0, (tmp & 0xFF) - 32);
+ }
+
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xEFFF);
+
+ // (SPEC?) TODO Set "Target TX frequency" variable to 0
+ // SPEC FIXME "Set BB Multiplier to 0xE000" impossible - bb_mult is u8!
+}
+
+static void lpphy_tx_pctl_init_sw(struct b43_wldev *dev)
+{
+ struct lpphy_tx_gains gains;
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ gains.gm = 4;
+ gains.pad = 12;
+ gains.pga = 12;
+ gains.dac = 0;
+ } else {
+ gains.gm = 7;
+ gains.pad = 14;
+ gains.pga = 15;
+ gains.dac = 0;
+ }
+ lpphy_set_tx_gains(dev, gains);
+ lpphy_set_bb_mult(dev, 150);
+}
+
/* Initialize TX power control */
static void lpphy_tx_pctl_init(struct b43_wldev *dev)
{
if (0/*FIXME HWPCTL capable */) {
- //TODO
+ lpphy_tx_pctl_init_hw(dev);
} else { /* This device is only software TX power control capable. */
- if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
- //TODO
- } else {
- //TODO
- }
- //TODO set BB multiplier to 0x0096
+ lpphy_tx_pctl_init_sw(dev);
}
}
-static int b43_lpphy_op_init(struct b43_wldev *dev)
-{
- /* TODO: band SPROM */
- lpphy_baseband_init(dev);
- lpphy_radio_init(dev);
- //TODO calibrate RC
- //TODO set channel
- lpphy_tx_pctl_init(dev);
- //TODO full calib
-
- return 0;
-}
-
static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
{
b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
@@ -463,6 +1501,14 @@
b43_write16(dev, B43_MMIO_PHY_DATA, value);
}
+static void b43_lpphy_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
+ u16 set)
+{
+ b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+ b43_write16(dev, B43_MMIO_PHY_DATA,
+ (b43_read16(dev, B43_MMIO_PHY_DATA) & mask) | set);
+}
+
static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
{
/* Register 1 is a 32-bit register. */
@@ -493,23 +1539,681 @@
//TODO
}
-static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
- unsigned int new_channel)
+struct b206x_channel {
+ u8 channel;
+ u16 freq;
+ u8 data[12];
+};
+
+static const struct b206x_channel b2062_chantbl[] = {
+ { .channel = 1, .freq = 2412, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 2, .freq = 2417, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 3, .freq = 2422, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 4, .freq = 2427, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 5, .freq = 2432, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 6, .freq = 2437, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 7, .freq = 2442, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 8, .freq = 2447, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 9, .freq = 2452, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 10, .freq = 2457, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 11, .freq = 2462, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 12, .freq = 2467, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 13, .freq = 2472, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 14, .freq = 2484, .data[0] = 0xFF, .data[1] = 0xFF,
+ .data[2] = 0xB5, .data[3] = 0x1B, .data[4] = 0x24, .data[5] = 0x32,
+ .data[6] = 0x32, .data[7] = 0x88, .data[8] = 0x88, },
+ { .channel = 34, .freq = 5170, .data[0] = 0x00, .data[1] = 0x22,
+ .data[2] = 0x20, .data[3] = 0x84, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 38, .freq = 5190, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x10, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 42, .freq = 5210, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x10, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 46, .freq = 5230, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 36, .freq = 5180, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x20, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 40, .freq = 5200, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x10, .data[3] = 0x84, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 44, .freq = 5220, .data[0] = 0x00, .data[1] = 0x11,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 48, .freq = 5240, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 52, .freq = 5260, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 56, .freq = 5280, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x83, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 60, .freq = 5300, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x63, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 64, .freq = 5320, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x62, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 100, .freq = 5500, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x30, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 104, .freq = 5520, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x20, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 108, .freq = 5540, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x20, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 112, .freq = 5560, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x20, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 116, .freq = 5580, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x10, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 120, .freq = 5600, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 124, .freq = 5620, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 128, .freq = 5640, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 132, .freq = 5660, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 136, .freq = 5680, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 140, .freq = 5700, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 149, .freq = 5745, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 153, .freq = 5765, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 157, .freq = 5785, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 161, .freq = 5805, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 165, .freq = 5825, .data[0] = 0x00, .data[1] = 0x00,
+ .data[2] = 0x00, .data[3] = 0x00, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x37, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 184, .freq = 4920, .data[0] = 0x55, .data[1] = 0x77,
+ .data[2] = 0x90, .data[3] = 0xF7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 188, .freq = 4940, .data[0] = 0x44, .data[1] = 0x77,
+ .data[2] = 0x80, .data[3] = 0xE7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 192, .freq = 4960, .data[0] = 0x44, .data[1] = 0x66,
+ .data[2] = 0x80, .data[3] = 0xE7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 196, .freq = 4980, .data[0] = 0x33, .data[1] = 0x66,
+ .data[2] = 0x70, .data[3] = 0xC7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 200, .freq = 5000, .data[0] = 0x22, .data[1] = 0x55,
+ .data[2] = 0x60, .data[3] = 0xD7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 204, .freq = 5020, .data[0] = 0x22, .data[1] = 0x55,
+ .data[2] = 0x60, .data[3] = 0xC7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 208, .freq = 5040, .data[0] = 0x22, .data[1] = 0x44,
+ .data[2] = 0x50, .data[3] = 0xC7, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0xFF, },
+ { .channel = 212, .freq = 5060, .data[0] = 0x11, .data[1] = 0x44,
+ .data[2] = 0x50, .data[3] = 0xA5, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+ { .channel = 216, .freq = 5080, .data[0] = 0x00, .data[1] = 0x44,
+ .data[2] = 0x40, .data[3] = 0xB6, .data[4] = 0x3C, .data[5] = 0x77,
+ .data[6] = 0x35, .data[7] = 0xFF, .data[8] = 0x88, },
+};
+
+static const struct b206x_channel b2063_chantbl[] = {
+ { .channel = 1, .freq = 2412, .data[0] = 0x6F, .data[1] = 0x3C,
+ .data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 2, .freq = 2417, .data[0] = 0x6F, .data[1] = 0x3C,
+ .data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 3, .freq = 2422, .data[0] = 0x6F, .data[1] = 0x3C,
+ .data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 4, .freq = 2427, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 5, .freq = 2432, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 6, .freq = 2437, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 7, .freq = 2442, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 8, .freq = 2447, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 9, .freq = 2452, .data[0] = 0x6F, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 10, .freq = 2457, .data[0] = 0x6F, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 11, .freq = 2462, .data[0] = 0x6E, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 12, .freq = 2467, .data[0] = 0x6E, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 13, .freq = 2472, .data[0] = 0x6E, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 14, .freq = 2484, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 34, .freq = 5170, .data[0] = 0x6A, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x02, .data[5] = 0x05,
+ .data[6] = 0x0D, .data[7] = 0x0D, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 36, .freq = 5180, .data[0] = 0x6A, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x05,
+ .data[6] = 0x0D, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 38, .freq = 5190, .data[0] = 0x6A, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x04,
+ .data[6] = 0x0C, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 40, .freq = 5200, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x04,
+ .data[6] = 0x0C, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x70,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 42, .freq = 5210, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x04,
+ .data[6] = 0x0B, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x70,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 44, .freq = 5220, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x04,
+ .data[6] = 0x0B, .data[7] = 0x0B, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 46, .freq = 5230, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x03,
+ .data[6] = 0x0A, .data[7] = 0x0B, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 48, .freq = 5240, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x03,
+ .data[6] = 0x0A, .data[7] = 0x0A, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 52, .freq = 5260, .data[0] = 0x68, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x02,
+ .data[6] = 0x09, .data[7] = 0x09, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 56, .freq = 5280, .data[0] = 0x68, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x01,
+ .data[6] = 0x08, .data[7] = 0x08, .data[8] = 0x77, .data[9] = 0x50,
+ .data[10] = 0x10, .data[11] = 0x00, },
+ { .channel = 60, .freq = 5300, .data[0] = 0x68, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x01,
+ .data[6] = 0x08, .data[7] = 0x08, .data[8] = 0x77, .data[9] = 0x50,
+ .data[10] = 0x10, .data[11] = 0x00, },
+ { .channel = 64, .freq = 5320, .data[0] = 0x67, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x08, .data[7] = 0x08, .data[8] = 0x77, .data[9] = 0x50,
+ .data[10] = 0x10, .data[11] = 0x00, },
+ { .channel = 100, .freq = 5500, .data[0] = 0x64, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x02, .data[7] = 0x01, .data[8] = 0x77, .data[9] = 0x20,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 104, .freq = 5520, .data[0] = 0x64, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x01, .data[7] = 0x01, .data[8] = 0x77, .data[9] = 0x20,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 108, .freq = 5540, .data[0] = 0x63, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x01, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x10,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 112, .freq = 5560, .data[0] = 0x63, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x10,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 116, .freq = 5580, .data[0] = 0x62, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x10,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 120, .freq = 5600, .data[0] = 0x62, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 124, .freq = 5620, .data[0] = 0x62, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 128, .freq = 5640, .data[0] = 0x61, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 132, .freq = 5660, .data[0] = 0x61, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 136, .freq = 5680, .data[0] = 0x61, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 140, .freq = 5700, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 149, .freq = 5745, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 153, .freq = 5765, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 157, .freq = 5785, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 161, .freq = 5805, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 165, .freq = 5825, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 184, .freq = 4920, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x09, .data[5] = 0x0E,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xC0,
+ .data[10] = 0x50, .data[11] = 0x00, },
+ { .channel = 188, .freq = 4940, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x09, .data[5] = 0x0D,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xB0,
+ .data[10] = 0x50, .data[11] = 0x00, },
+ { .channel = 192, .freq = 4960, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0C,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xB0,
+ .data[10] = 0x50, .data[11] = 0x00, },
+ { .channel = 196, .freq = 4980, .data[0] = 0x6D, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0C,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xA0,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 200, .freq = 5000, .data[0] = 0x6D, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0B,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xA0,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 204, .freq = 5020, .data[0] = 0x6D, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0A,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xA0,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 208, .freq = 5040, .data[0] = 0x6C, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x07, .data[5] = 0x09,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0x90,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 212, .freq = 5060, .data[0] = 0x6C, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x06, .data[5] = 0x08,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0x90,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 216, .freq = 5080, .data[0] = 0x6C, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x05, .data[5] = 0x08,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0x90,
+ .data[10] = 0x40, .data[11] = 0x00, },
+};
+
+static void lpphy_b2062_reset_pll_bias(struct b43_wldev *dev)
{
- //TODO
+ struct ssb_bus *bus = dev->dev->bus;
+
+ b43_radio_write(dev, B2062_S_RFPLL_CTL2, 0xFF);
+ udelay(20);
+ if (bus->chip_id == 0x5354) {
+ b43_radio_write(dev, B2062_N_COMM1, 4);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL2, 4);
+ } else {
+ b43_radio_write(dev, B2062_S_RFPLL_CTL2, 0);
+ }
+ udelay(5);
+}
+
+static void lpphy_b2062_vco_calib(struct b43_wldev *dev)
+{
+ b43_radio_write(dev, B2062_S_RFPLL_CTL21, 0x42);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL21, 0x62);
+ udelay(200);
+}
+
+static int lpphy_b2062_tune(struct b43_wldev *dev,
+ unsigned int channel)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ struct ssb_bus *bus = dev->dev->bus;
+ const struct b206x_channel *chandata = NULL;
+ u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
+ u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
+ int i, err = 0;
+
+ for (i = 0; i < ARRAY_SIZE(b2062_chantbl); i++) {
+ if (b2062_chantbl[i].channel == channel) {
+ chandata = &b2062_chantbl[i];
+ break;
+ }
+ }
+
+ if (B43_WARN_ON(!chandata))
+ return -EINVAL;
+
+ b43_radio_set(dev, B2062_S_RFPLL_CTL14, 0x04);
+ b43_radio_write(dev, B2062_N_LGENA_TUNE0, chandata->data[0]);
+ b43_radio_write(dev, B2062_N_LGENA_TUNE2, chandata->data[1]);
+ b43_radio_write(dev, B2062_N_LGENA_TUNE3, chandata->data[2]);
+ b43_radio_write(dev, B2062_N_TX_TUNE, chandata->data[3]);
+ b43_radio_write(dev, B2062_S_LGENG_CTL1, chandata->data[4]);
+ b43_radio_write(dev, B2062_N_LGENA_CTL5, chandata->data[5]);
+ b43_radio_write(dev, B2062_N_LGENA_CTL6, chandata->data[6]);
+ b43_radio_write(dev, B2062_N_TX_PGA, chandata->data[7]);
+ b43_radio_write(dev, B2062_N_TX_PAD, chandata->data[8]);
+
+ tmp1 = crystal_freq / 1000;
+ tmp2 = lpphy->pdiv * 1000;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL33, 0xCC);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL34, 0x07);
+ lpphy_b2062_reset_pll_bias(dev);
+ tmp3 = tmp2 * channel2freq_lp(channel);
+ if (channel2freq_lp(channel) < 4000)
+ tmp3 *= 2;
+ tmp4 = 48 * tmp1;
+ tmp6 = tmp3 / tmp4;
+ tmp7 = tmp3 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL26, tmp6);
+ tmp5 = tmp7 * 0x100;
+ tmp6 = tmp5 / tmp4;
+ tmp7 = tmp5 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL27, tmp6);
+ tmp5 = tmp7 * 0x100;
+ tmp6 = tmp5 / tmp4;
+ tmp7 = tmp5 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL28, tmp6);
+ tmp5 = tmp7 * 0x100;
+ tmp6 = tmp5 / tmp4;
+ tmp7 = tmp5 % tmp4;
+ b43_radio_write(dev, B2062_S_RFPLL_CTL29, tmp6 + ((2 * tmp7) / tmp4));
+ tmp8 = b43_radio_read(dev, B2062_S_RFPLL_CTL19);
+ tmp9 = ((2 * tmp3 * (tmp8 + 1)) + (3 * tmp1)) / (6 * tmp1);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL23, (tmp9 >> 8) + 16);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL24, tmp9 & 0xFF);
+
+ lpphy_b2062_vco_calib(dev);
+ if (b43_radio_read(dev, B2062_S_RFPLL_CTL3) & 0x10) {
+ b43_radio_write(dev, B2062_S_RFPLL_CTL33, 0xFC);
+ b43_radio_write(dev, B2062_S_RFPLL_CTL34, 0);
+ lpphy_b2062_reset_pll_bias(dev);
+ lpphy_b2062_vco_calib(dev);
+ if (b43_radio_read(dev, B2062_S_RFPLL_CTL3) & 0x10)
+ err = -EIO;
+ }
+
+ b43_radio_mask(dev, B2062_S_RFPLL_CTL14, ~0x04);
+ return err;
+}
+
+
+/* This was previously called lpphy_japan_filter */
+static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel)
+{
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter!
+
+ if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific?
+ b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9);
+ if ((dev->phy.rev == 1) && (lpphy->rc_cap))
+ lpphy_set_rc_cap(dev);
+ } else {
+ b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F);
+ }
+}
+
+static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
+{
+ u16 tmp;
+
+ b43_radio_mask(dev, B2063_PLL_SP1, ~0x40);
+ tmp = b43_radio_read(dev, B2063_PLL_JTAG_CALNRST) & 0xF8;
+ b43_radio_write(dev, B2063_PLL_JTAG_CALNRST, tmp);
+ udelay(1);
+ b43_radio_write(dev, B2063_PLL_JTAG_CALNRST, tmp | 0x4);
+ udelay(1);
+ b43_radio_write(dev, B2063_PLL_JTAG_CALNRST, tmp | 0x6);
+ udelay(1);
+ b43_radio_write(dev, B2063_PLL_JTAG_CALNRST, tmp | 0x7);
+ udelay(300);
+ b43_radio_set(dev, B2063_PLL_SP1, 0x40);
+}
+
+static int lpphy_b2063_tune(struct b43_wldev *dev,
+ unsigned int channel)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+
+ static const struct b206x_channel *chandata = NULL;
+ u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
+ u32 freqref, vco_freq, val1, val2, val3, timeout, timeoutref, count;
+ u16 old_comm15, scale;
+ u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+ int i, div = (crystal_freq <= 26000000 ? 1 : 2);
+
+ for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) {
+ if (b2063_chantbl[i].channel == channel) {
+ chandata = &b2063_chantbl[i];
+ break;
+ }
+ }
+
+ if (B43_WARN_ON(!chandata))
+ return -EINVAL;
+
+ b43_radio_write(dev, B2063_LOGEN_VCOBUF1, chandata->data[0]);
+ b43_radio_write(dev, B2063_LOGEN_MIXER2, chandata->data[1]);
+ b43_radio_write(dev, B2063_LOGEN_BUF2, chandata->data[2]);
+ b43_radio_write(dev, B2063_LOGEN_RCCR1, chandata->data[3]);
+ b43_radio_write(dev, B2063_A_RX_1ST3, chandata->data[4]);
+ b43_radio_write(dev, B2063_A_RX_2ND1, chandata->data[5]);
+ b43_radio_write(dev, B2063_A_RX_2ND4, chandata->data[6]);
+ b43_radio_write(dev, B2063_A_RX_2ND7, chandata->data[7]);
+ b43_radio_write(dev, B2063_A_RX_PS6, chandata->data[8]);
+ b43_radio_write(dev, B2063_TX_RF_CTL2, chandata->data[9]);
+ b43_radio_write(dev, B2063_TX_RF_CTL5, chandata->data[10]);
+ b43_radio_write(dev, B2063_PA_CTL11, chandata->data[11]);
+
+ old_comm15 = b43_radio_read(dev, B2063_COMM15);
+ b43_radio_set(dev, B2063_COMM15, 0x1E);
+
+ if (chandata->freq > 4000) /* spec says 2484, but 4000 is safer */
+ vco_freq = chandata->freq << 1;
+ else
+ vco_freq = chandata->freq << 2;
+
+ freqref = crystal_freq * 3;
+ val1 = lpphy_qdiv_roundup(crystal_freq, 1000000, 16);
+ val2 = lpphy_qdiv_roundup(crystal_freq, 1000000 * div, 16);
+ val3 = lpphy_qdiv_roundup(vco_freq, 3, 16);
+ timeout = ((((8 * crystal_freq) / (div * 5000000)) + 1) >> 1) - 1;
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_VCO_CALIB3, 0x2);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_VCO_CALIB6,
+ 0xFFF8, timeout >> 2);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_VCO_CALIB7,
+ 0xFF9F,timeout << 5);
+
+ timeoutref = ((((8 * crystal_freq) / (div * (timeout + 1))) +
+ 999999) / 1000000) + 1;
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_VCO_CALIB5, timeoutref);
+
+ count = lpphy_qdiv_roundup(val3, val2 + 16, 16);
+ count *= (timeout + 1) * (timeoutref + 1);
+ count--;
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_VCO_CALIB7,
+ 0xF0, count >> 8);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_VCO_CALIB8, count & 0xFF);
+
+ tmp1 = ((val3 * 62500) / freqref) << 4;
+ tmp2 = ((val3 * 62500) % freqref) << 4;
+ while (tmp2 >= freqref) {
+ tmp1++;
+ tmp2 -= freqref;
+ }
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_SG1, 0xFFE0, tmp1 >> 4);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_SG2, 0xFE0F, tmp1 << 4);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_SG2, 0xFFF0, tmp1 >> 16);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_SG3, (tmp2 >> 8) & 0xFF);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_SG4, tmp2 & 0xFF);
+
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF1, 0xB9);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF2, 0x88);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF3, 0x28);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF4, 0x63);
+
+ tmp3 = ((41 * (val3 - 3000)) /1200) + 27;
+ tmp4 = lpphy_qdiv_roundup(132000 * tmp1, 8451, 16);
+
+ if ((tmp4 + tmp3 - 1) / tmp3 > 60) {
+ scale = 1;
+ tmp5 = ((tmp4 + tmp3) / (tmp3 << 1)) - 8;
+ } else {
+ scale = 0;
+ tmp5 = ((tmp4 + (tmp3 >> 1)) / tmp3) - 8;
+ }
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_CP2, 0xFFC0, tmp5);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_CP2, 0xFFBF, scale << 6);
+
+ tmp6 = lpphy_qdiv_roundup(100 * val1, val3, 16);
+ tmp6 *= (tmp5 * 8) * (scale + 1);
+ if (tmp6 > 150)
+ tmp6 = 0;
+
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_CP3, 0xFFE0, tmp6);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_CP3, 0xFFDF, scale << 5);
+
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_XTAL_12, 0xFFFB, 0x4);
+ if (crystal_freq > 26000000)
+ b43_radio_set(dev, B2063_PLL_JTAG_PLL_XTAL_12, 0x2);
+ else
+ b43_radio_mask(dev, B2063_PLL_JTAG_PLL_XTAL_12, 0xFD);
+
+ if (val1 == 45)
+ b43_radio_set(dev, B2063_PLL_JTAG_PLL_VCO1, 0x2);
+ else
+ b43_radio_mask(dev, B2063_PLL_JTAG_PLL_VCO1, 0xFD);
+
+ b43_radio_set(dev, B2063_PLL_SP2, 0x3);
+ udelay(1);
+ b43_radio_mask(dev, B2063_PLL_SP2, 0xFFFC);
+ lpphy_b2063_vco_calib(dev);
+ b43_radio_write(dev, B2063_COMM15, old_comm15);
+
return 0;
}
-static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
+static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
+ unsigned int new_channel)
{
- if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
- return 1;
- return 36;
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ int err;
+
+ if (dev->phy.radio_ver == 0x2063) {
+ err = lpphy_b2063_tune(dev, new_channel);
+ if (err)
+ return err;
+ } else {
+ err = lpphy_b2062_tune(dev, new_channel);
+ if (err)
+ return err;
+ lpphy_set_analog_filter(dev, new_channel);
+ lpphy_adjust_gain_table(dev, channel2freq_lp(new_channel));
+ }
+
+ lpphy->channel = new_channel;
+ b43_write16(dev, B43_MMIO_CHANNEL, new_channel);
+
+ return 0;
+}
+
+static int b43_lpphy_op_init(struct b43_wldev *dev)
+{
+ int err;
+
+ lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs?
+ lpphy_baseband_init(dev);
+ lpphy_radio_init(dev);
+ lpphy_calibrate_rc(dev);
+ err = b43_lpphy_op_switch_channel(dev, 7);
+ if (err) {
+ b43dbg(dev->wl, "Switch to channel 7 failed, error = %d.\n",
+ err);
+ }
+ lpphy_tx_pctl_init(dev);
+ lpphy_calibration(dev);
+ //TODO ACI init
+
+ return 0;
}
static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
{
- //TODO
+ if (dev->phy.rev >= 2)
+ return; // rev2+ doesn't support antenna diversity
+
+ if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1))
+ return;
+
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2);
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1);
}
static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
@@ -524,7 +2228,6 @@
return B43_TXPWR_RES_DONE;
}
-
const struct b43_phy_operations b43_phyops_lp = {
.allocate = b43_lpphy_op_allocate,
.free = b43_lpphy_op_free,
@@ -532,6 +2235,7 @@
.init = b43_lpphy_op_init,
.phy_read = b43_lpphy_op_read,
.phy_write = b43_lpphy_op_write,
+ .phy_maskset = b43_lpphy_op_maskset,
.radio_read = b43_lpphy_op_radio_read,
.radio_write = b43_lpphy_op_radio_write,
.software_rfkill = b43_lpphy_op_software_rfkill,
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index 18370b4..c3232c1 100644
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -273,12 +273,19 @@
#define B43_LPPHY_AFE_DDFS_POINTER_INIT B43_PHY_OFDM(0xB8) /* AFE DDFS pointer init */
#define B43_LPPHY_AFE_DDFS_INCR_INIT B43_PHY_OFDM(0xB9) /* AFE DDFS incr init */
#define B43_LPPHY_MRCNOISEREDUCTION B43_PHY_OFDM(0xBA) /* mrcNoiseReduction */
-#define B43_LPPHY_TRLOOKUP3 B43_PHY_OFDM(0xBB) /* TRLookup3 */
-#define B43_LPPHY_TRLOOKUP4 B43_PHY_OFDM(0xBC) /* TRLookup4 */
+#define B43_LPPHY_TR_LOOKUP_3 B43_PHY_OFDM(0xBB) /* TR Lookup 3 */
+#define B43_LPPHY_TR_LOOKUP_4 B43_PHY_OFDM(0xBC) /* TR Lookup 4 */
#define B43_LPPHY_RADAR_FIFO_STAT B43_PHY_OFDM(0xBD) /* Radar FIFO Status */
#define B43_LPPHY_GPIO_OUTEN B43_PHY_OFDM(0xBE) /* GPIO Out enable */
#define B43_LPPHY_GPIO_SELECT B43_PHY_OFDM(0xBF) /* GPIO Select */
#define B43_LPPHY_GPIO_OUT B43_PHY_OFDM(0xC0) /* GPIO Out */
+#define B43_LPPHY_4C3 B43_PHY_OFDM(0xC3) /* unknown, used during BB init */
+#define B43_LPPHY_4C4 B43_PHY_OFDM(0xC4) /* unknown, used during BB init */
+#define B43_LPPHY_4C5 B43_PHY_OFDM(0xC5) /* unknown, used during BB init */
+#define B43_LPPHY_TR_LOOKUP_5 B43_PHY_OFDM(0xC7) /* TR Lookup 5 */
+#define B43_LPPHY_TR_LOOKUP_6 B43_PHY_OFDM(0xC8) /* TR Lookup 6 */
+#define B43_LPPHY_TR_LOOKUP_7 B43_PHY_OFDM(0xC9) /* TR Lookup 7 */
+#define B43_LPPHY_TR_LOOKUP_8 B43_PHY_OFDM(0xCA) /* TR Lookup 8 */
@@ -818,14 +825,30 @@
enum b43_lpphy_txpctl_mode txpctl_mode;
/* Transmit isolation medium band */
- u8 tx_isolation_med_band; /* FIXME initial value? */
+ u8 tx_isolation_med_band;
/* Transmit isolation low band */
- u8 tx_isolation_low_band; /* FIXME initial value? */
+ u8 tx_isolation_low_band;
/* Transmit isolation high band */
- u8 tx_isolation_hi_band; /* FIXME initial value? */
+ u8 tx_isolation_hi_band;
+
+ /* Max transmit power medium band */
+ u16 max_tx_pwr_med_band;
+ /* Max transmit power low band */
+ u16 max_tx_pwr_low_band;
+ /* Max transmit power high band */
+ u16 max_tx_pwr_hi_band;
+
+ /* FIXME What are these used for? */
+ /* FIXME Is 15 the correct array size? */
+ u16 tx_max_rate[15];
+ u16 tx_max_ratel[15];
+ u16 tx_max_rateh[15];
+
+ /* Transmit power arrays */
+ s16 txpa[3], txpal[3], txpah[3];
/* Receive power offset */
- u8 rx_pwr_offset; /* FIXME initial value? */
+ u8 rx_pwr_offset;
/* TSSI transmit count */
u16 tssi_tx_count;
@@ -841,16 +864,16 @@
s8 tx_pwr_idx_over; /* FIXME initial value? */
/* RSSI vf */
- u8 rssi_vf; /* FIXME initial value? */
+ u8 rssi_vf;
/* RSSI vc */
- u8 rssi_vc; /* FIXME initial value? */
+ u8 rssi_vc;
/* RSSI gs */
- u8 rssi_gs; /* FIXME initial value? */
+ u8 rssi_gs;
/* RC cap */
u8 rc_cap; /* FIXME initial value? */
/* BX arch */
- u8 bx_arch; /* FIXME initial value? */
+ u8 bx_arch;
/* Full calibration channel */
u8 full_calib_chan; /* FIXME initial value? */
@@ -858,8 +881,23 @@
/* Transmit iqlocal best coeffs */
bool tx_iqloc_best_coeffs_valid;
u8 tx_iqloc_best_coeffs[11];
+
+ /* Used for "Save/Restore Dig Filt State" */
+ u16 dig_flt_state[9];
+
+ bool crs_usr_disable, crs_sys_disable;
+
+ unsigned int pdiv;
+
+ /* The channel we are tuned to */
+ u8 channel;
};
+enum tssi_mux_mode {
+ TSSI_MUX_PREPA,
+ TSSI_MUX_POSTPA,
+ TSSI_MUX_EXT,
+};
struct b43_phy_operations;
extern const struct b43_phy_operations b43_phyops_lp;
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index be7b560..992318a 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -137,7 +137,8 @@
b43_radio_mask(dev, B2055_MASTER1, 0xFFF3);
msleep(1);
- if ((sprom->revision != 4) || !(sprom->boardflags_hi & 0x0002)) {
+ if ((sprom->revision != 4) ||
+ !(sprom->boardflags_hi & B43_BFH_RSSIINV)) {
if ((binfo->vendor != PCI_VENDOR_ID_BROADCOM) ||
(binfo->type != 0x46D) ||
(binfo->rev < 0x41)) {
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 69138e8..3498b68 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -32,9 +32,6 @@
#include <linux/delay.h>
-static void b43_pio_rx_work(struct work_struct *work);
-
-
static u16 generate_cookie(struct b43_pio_txqueue *q,
struct b43_pio_txpacket *pack)
{
@@ -144,7 +141,6 @@
q = kzalloc(sizeof(*q), GFP_KERNEL);
if (!q)
return NULL;
- spin_lock_init(&q->lock);
q->dev = dev;
q->rev = dev->dev->id.revision;
q->mmio_base = index_to_pioqueue_base(dev, index) +
@@ -179,12 +175,10 @@
q = kzalloc(sizeof(*q), GFP_KERNEL);
if (!q)
return NULL;
- spin_lock_init(&q->lock);
q->dev = dev;
q->rev = dev->dev->id.revision;
q->mmio_base = index_to_pioqueue_base(dev, index) +
pio_rxqueue_offset(dev);
- INIT_WORK(&q->rx_work, b43_pio_rx_work);
/* Enable Direct FIFO RX (PIO) on the engine. */
b43_dma_direct_fifo_rx(dev, index, 1);
@@ -249,13 +243,6 @@
destroy_queue_tx(pio, tx_queue_AC_BK);
}
-void b43_pio_stop(struct b43_wldev *dev)
-{
- if (!b43_using_pio_transfers(dev))
- return;
- cancel_work_sync(&dev->pio.rx_queue->rx_work);
-}
-
int b43_pio_init(struct b43_wldev *dev)
{
struct b43_pio *pio = &dev->pio;
@@ -461,8 +448,8 @@
cookie = generate_cookie(q, pack);
hdrlen = b43_txhdr_size(q->dev);
- err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb->data,
- skb->len, info, cookie);
+ err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
+ info, cookie);
if (err)
return err;
@@ -494,7 +481,6 @@
{
struct b43_pio_txqueue *q;
struct ieee80211_hdr *hdr;
- unsigned long flags;
unsigned int hdrlen, total_len;
int err = 0;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -512,20 +498,18 @@
q = select_queue_by_priority(dev, skb_get_queue_mapping(skb));
}
- spin_lock_irqsave(&q->lock, flags);
-
hdrlen = b43_txhdr_size(dev);
total_len = roundup(skb->len + hdrlen, 4);
if (unlikely(total_len > q->buffer_size)) {
err = -ENOBUFS;
b43dbg(dev->wl, "PIO: TX packet longer than queue.\n");
- goto out_unlock;
+ goto out;
}
if (unlikely(q->free_packet_slots == 0)) {
err = -ENOBUFS;
b43warn(dev->wl, "PIO: TX packet overflow.\n");
- goto out_unlock;
+ goto out;
}
B43_WARN_ON(q->buffer_used > q->buffer_size);
@@ -534,7 +518,7 @@
err = -EBUSY;
ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
q->stopped = 1;
- goto out_unlock;
+ goto out;
}
/* Assign the queue number to the ring (if not already done before)
@@ -548,11 +532,11 @@
* anymore and must not transmit it unencrypted. */
dev_kfree_skb_any(skb);
err = 0;
- goto out_unlock;
+ goto out;
}
if (unlikely(err)) {
b43err(dev->wl, "PIO transmission failure\n");
- goto out_unlock;
+ goto out;
}
q->nr_tx_packets++;
@@ -564,13 +548,10 @@
q->stopped = 1;
}
-out_unlock:
- spin_unlock_irqrestore(&q->lock, flags);
-
+out:
return err;
}
-/* Called with IRQs disabled. */
void b43_pio_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status)
{
@@ -584,8 +565,6 @@
return;
B43_WARN_ON(!pack);
- spin_lock(&q->lock); /* IRQs are already disabled. */
-
info = IEEE80211_SKB_CB(pack->skb);
b43_fill_txstatus_report(dev, info, status);
@@ -603,8 +582,6 @@
ieee80211_wake_queue(dev->wl->hw, q->queue_prio);
q->stopped = 0;
}
-
- spin_unlock(&q->lock);
}
void b43_pio_get_tx_stats(struct b43_wldev *dev,
@@ -612,17 +589,14 @@
{
const int nr_queues = dev->wl->hw->queues;
struct b43_pio_txqueue *q;
- unsigned long flags;
int i;
for (i = 0; i < nr_queues; i++) {
q = select_queue_by_priority(dev, i);
- spin_lock_irqsave(&q->lock, flags);
stats[i].len = B43_PIO_MAX_NR_TXPACKETS - q->free_packet_slots;
stats[i].limit = B43_PIO_MAX_NR_TXPACKETS;
stats[i].count = q->nr_tx_packets;
- spin_unlock_irqrestore(&q->lock, flags);
}
}
@@ -760,37 +734,23 @@
return 1;
}
-/* RX workqueue. We can sleep, yay! */
-static void b43_pio_rx_work(struct work_struct *work)
-{
- struct b43_pio_rxqueue *q = container_of(work, struct b43_pio_rxqueue,
- rx_work);
- unsigned int budget = 50;
- bool stop;
-
- do {
- spin_lock_irq(&q->lock);
- stop = (pio_rx_frame(q) == 0);
- spin_unlock_irq(&q->lock);
- cond_resched();
- if (stop)
- break;
- } while (--budget);
-}
-
-/* Called with IRQs disabled. */
void b43_pio_rx(struct b43_pio_rxqueue *q)
{
- /* Due to latency issues we must run the RX path in
- * a workqueue to be able to schedule between packets. */
- queue_work(q->dev->wl->hw->workqueue, &q->rx_work);
+ unsigned int count = 0;
+ bool stop;
+
+ while (1) {
+ stop = (pio_rx_frame(q) == 0);
+ if (stop)
+ break;
+ cond_resched();
+ if (WARN_ON_ONCE(++count > 10000))
+ break;
+ }
}
static void b43_pio_tx_suspend_queue(struct b43_pio_txqueue *q)
{
- unsigned long flags;
-
- spin_lock_irqsave(&q->lock, flags);
if (q->rev >= 8) {
b43_piotx_write32(q, B43_PIO8_TXCTL,
b43_piotx_read32(q, B43_PIO8_TXCTL)
@@ -800,14 +760,10 @@
b43_piotx_read16(q, B43_PIO_TXCTL)
| B43_PIO_TXCTL_SUSPREQ);
}
- spin_unlock_irqrestore(&q->lock, flags);
}
static void b43_pio_tx_resume_queue(struct b43_pio_txqueue *q)
{
- unsigned long flags;
-
- spin_lock_irqsave(&q->lock, flags);
if (q->rev >= 8) {
b43_piotx_write32(q, B43_PIO8_TXCTL,
b43_piotx_read32(q, B43_PIO8_TXCTL)
@@ -817,7 +773,6 @@
b43_piotx_read16(q, B43_PIO_TXCTL)
& ~B43_PIO_TXCTL_SUSPREQ);
}
- spin_unlock_irqrestore(&q->lock, flags);
}
void b43_pio_tx_suspend(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/pio.h b/drivers/net/wireless/b43/pio.h
index 6c174c9..7dd649c9 100644
--- a/drivers/net/wireless/b43/pio.h
+++ b/drivers/net/wireless/b43/pio.h
@@ -70,7 +70,6 @@
struct b43_pio_txqueue {
struct b43_wldev *dev;
- spinlock_t lock;
u16 mmio_base;
/* The device queue buffer size in bytes. */
@@ -103,12 +102,8 @@
struct b43_pio_rxqueue {
struct b43_wldev *dev;
- spinlock_t lock;
u16 mmio_base;
- /* Work to reduce latency issues on RX. */
- struct work_struct rx_work;
-
/* Shortcut to the 802.11 core revision. This is to
* avoid horrible pointer dereferencing in the fastpaths. */
u8 rev;
@@ -162,7 +157,6 @@
int b43_pio_init(struct b43_wldev *dev);
-void b43_pio_stop(struct b43_wldev *dev);
void b43_pio_free(struct b43_wldev *dev);
int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb);
diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c
index 5adaa36..f1ae4e0 100644
--- a/drivers/net/wireless/b43/sysfs.c
+++ b/drivers/net/wireless/b43/sysfs.c
@@ -94,7 +94,6 @@
const char *buf, size_t count)
{
struct b43_wldev *wldev = dev_to_b43_wldev(dev);
- unsigned long flags;
int err;
int mode;
@@ -120,7 +119,6 @@
}
mutex_lock(&wldev->wl->mutex);
- spin_lock_irqsave(&wldev->wl->irq_lock, flags);
if (wldev->phy.ops->interf_mitigation) {
err = wldev->phy.ops->interf_mitigation(wldev, mode);
@@ -132,7 +130,6 @@
err = -ENOSYS;
mmiowb();
- spin_unlock_irqrestore(&wldev->wl->irq_lock, flags);
mutex_unlock(&wldev->wl->mutex);
return err ? err : count;
diff --git a/drivers/net/wireless/b43/tables_lpphy.c b/drivers/net/wireless/b43/tables_lpphy.c
index 4ea734d..61027ee 100644
--- a/drivers/net/wireless/b43/tables_lpphy.c
+++ b/drivers/net/wireless/b43/tables_lpphy.c
@@ -1,9 +1,10 @@
/*
Broadcom B43 wireless driver
- IEEE 802.11g LP-PHY and radio device data tables
+ IEEE 802.11a/g LP-PHY and radio device data tables
Copyright (c) 2009 Michael Buesch <mb@bu3sch.de>
+ Copyright (c) 2009 Gábor Stefanik <netrolller.3d@gmail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -28,22 +29,22 @@
#include "phy_lp.h"
-/* Entry of the 2062 radio init table */
-struct b2062_init_tab_entry {
+/* Entry of the 2062/2063 radio init table */
+struct b206x_init_tab_entry {
u16 offset;
u16 value_a;
u16 value_g;
u8 flags;
};
-#define B2062_FLAG_A 0x01 /* Flag: Init in A mode */
-#define B2062_FLAG_G 0x02 /* Flag: Init in G mode */
+#define B206X_FLAG_A 0x01 /* Flag: Init in A mode */
+#define B206X_FLAG_G 0x02 /* Flag: Init in G mode */
-static const struct b2062_init_tab_entry b2062_init_tab[] = {
+static const struct b206x_init_tab_entry b2062_init_tab[] = {
/* { .offset = B2062_N_COMM1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = 0x0001, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_COMM2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_COMM3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_N_COMM4, .value_a = 0x0001, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_COMM4, .value_a = 0x0001, .value_g = 0x0000, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_COMM5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_COMM6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_COMM7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
@@ -56,42 +57,42 @@
/* { .offset = B2062_N_COMM14, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_COMM15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_PDN_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_N_PDN_CTL1, .value_a = 0x0000, .value_g = 0x00CA, .flags = B2062_FLAG_G, },
+ { .offset = B2062_N_PDN_CTL1, .value_a = 0x0000, .value_g = 0x00CA, .flags = B206X_FLAG_G, },
/* { .offset = B2062_N_PDN_CTL2, .value_a = 0x0018, .value_g = 0x0018, .flags = 0, }, */
- { .offset = B2062_N_PDN_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_N_PDN_CTL4, .value_a = 0x0015, .value_g = 0x002A, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_PDN_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_N_PDN_CTL4, .value_a = 0x0015, .value_g = 0x002A, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_GEN_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_IQ_CALIB, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
- { .offset = B2062_N_LGENC, .value_a = 0x00DB, .value_g = 0x00FF, .flags = B2062_FLAG_A, },
+ { .offset = B2062_N_LGENC, .value_a = 0x00DB, .value_g = 0x00FF, .flags = B206X_FLAG_A, },
/* { .offset = B2062_N_LGENA_LPF, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
/* { .offset = B2062_N_LGENA_BIAS0, .value_a = 0x0041, .value_g = 0x0041, .flags = 0, }, */
/* { .offset = B2062_N_LGNEA_BIAS1, .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
/* { .offset = B2062_N_LGENA_CTL0, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
/* { .offset = B2062_N_LGENA_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_LGENA_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_N_LGENA_TUNE0, .value_a = 0x00DD, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_LGENA_TUNE0, .value_a = 0x00DD, .value_g = 0x0000, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_LGENA_TUNE1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_N_LGENA_TUNE2, .value_a = 0x00DD, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_N_LGENA_TUNE3, .value_a = 0x0077, .value_g = 0x00B5, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_N_LGENA_CTL3, .value_a = 0x0000, .value_g = 0x00FF, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_LGENA_TUNE2, .value_a = 0x00DD, .value_g = 0x0000, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_N_LGENA_TUNE3, .value_a = 0x0077, .value_g = 0x00B5, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_N_LGENA_CTL3, .value_a = 0x0000, .value_g = 0x00FF, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_LGENA_CTL4, .value_a = 0x001F, .value_g = 0x001F, .flags = 0, }, */
/* { .offset = B2062_N_LGENA_CTL5, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
/* { .offset = B2062_N_LGENA_CTL6, .value_a = 0x0032, .value_g = 0x0032, .flags = 0, }, */
- { .offset = B2062_N_LGENA_CTL7, .value_a = 0x0033, .value_g = 0x0033, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_LGENA_CTL7, .value_a = 0x0033, .value_g = 0x0033, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_RXA_CTL0, .value_a = 0x0009, .value_g = 0x0009, .flags = 0, }, */
- { .offset = B2062_N_RXA_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = B2062_FLAG_G, },
+ { .offset = B2062_N_RXA_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
/* { .offset = B2062_N_RXA_CTL2, .value_a = 0x0018, .value_g = 0x0018, .flags = 0, }, */
/* { .offset = B2062_N_RXA_CTL3, .value_a = 0x0027, .value_g = 0x0027, .flags = 0, }, */
/* { .offset = B2062_N_RXA_CTL4, .value_a = 0x0028, .value_g = 0x0028, .flags = 0, }, */
/* { .offset = B2062_N_RXA_CTL5, .value_a = 0x0007, .value_g = 0x0007, .flags = 0, }, */
/* { .offset = B2062_N_RXA_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_RXA_CTL7, .value_a = 0x0008, .value_g = 0x0008, .flags = 0, }, */
- { .offset = B2062_N_RXBB_CTL0, .value_a = 0x0082, .value_g = 0x0080, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_RXBB_CTL0, .value_a = 0x0082, .value_g = 0x0080, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_RXBB_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_RXBB_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_RXBB_GAIN0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_N_RXBB_GAIN1, .value_a = 0x0004, .value_g = 0x0004, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_N_RXBB_GAIN2, .value_a = 0x0000, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_RXBB_GAIN1, .value_a = 0x0004, .value_g = 0x0004, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_N_RXBB_GAIN2, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_RXBB_GAIN3, .value_a = 0x0011, .value_g = 0x0011, .flags = 0, }, */
/* { .offset = B2062_N_RXBB_RSSI0, .value_a = 0x0043, .value_g = 0x0043, .flags = 0, }, */
/* { .offset = B2062_N_RXBB_RSSI1, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
@@ -112,8 +113,8 @@
/* { .offset = B2062_N_TX_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_TX_CTL2, .value_a = 0x0084, .value_g = 0x0084, .flags = 0, }, */
/* { .offset = B2062_N_TX_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_N_TX_CTL4, .value_a = 0x0003, .value_g = 0x0003, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_N_TX_CTL5, .value_a = 0x0002, .value_g = 0x0002, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_TX_CTL4, .value_a = 0x0003, .value_g = 0x0003, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_N_TX_CTL5, .value_a = 0x0002, .value_g = 0x0002, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_TX_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_TX_CTL7, .value_a = 0x0058, .value_g = 0x0058, .flags = 0, }, */
/* { .offset = B2062_N_TX_CTL8, .value_a = 0x0082, .value_g = 0x0082, .flags = 0, }, */
@@ -121,7 +122,7 @@
/* { .offset = B2062_N_TX_CTL_A, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_N_TX_GC2G, .value_a = 0x00FF, .value_g = 0x00FF, .flags = 0, }, */
/* { .offset = B2062_N_TX_GC5G, .value_a = 0x00FF, .value_g = 0x00FF, .flags = 0, }, */
- { .offset = B2062_N_TX_TUNE, .value_a = 0x0088, .value_g = 0x001B, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_N_TX_TUNE, .value_a = 0x0088, .value_g = 0x001B, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_N_TX_PAD, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
/* { .offset = B2062_N_TX_PGA, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
/* { .offset = B2062_N_TX_PADAUX, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
@@ -150,7 +151,7 @@
/* { .offset = B2062_S_RADIO_ID_CODE, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_COMM2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_COMM3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_COMM4, .value_a = 0x0001, .value_g = 0x0000, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_COMM4, .value_a = 0x0001, .value_g = 0x0000, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_COMM5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_COMM6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_COMM7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
@@ -162,24 +163,24 @@
/* { .offset = B2062_S_COMM13, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_COMM14, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_COMM15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_PDS_CTL0, .value_a = 0x00FF, .value_g = 0x00FF, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_PDS_CTL0, .value_a = 0x00FF, .value_g = 0x00FF, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_PDS_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_PDS_CTL2, .value_a = 0x008E, .value_g = 0x008E, .flags = 0, }, */
/* { .offset = B2062_S_PDS_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_BG_CTL0, .value_a = 0x0006, .value_g = 0x0006, .flags = 0, }, */
/* { .offset = B2062_S_BG_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_BG_CTL2, .value_a = 0x0011, .value_g = 0x0011, .flags = 0, }, */
- { .offset = B2062_S_LGENG_CTL0, .value_a = 0x00F8, .value_g = 0x00D8, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_LGENG_CTL1, .value_a = 0x003C, .value_g = 0x0024, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_LGENG_CTL0, .value_a = 0x00F8, .value_g = 0x00D8, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_LGENG_CTL1, .value_a = 0x003C, .value_g = 0x0024, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_LGENG_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_LGENG_CTL3, .value_a = 0x0041, .value_g = 0x0041, .flags = 0, }, */
/* { .offset = B2062_S_LGENG_CTL4, .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
/* { .offset = B2062_S_LGENG_CTL5, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
/* { .offset = B2062_S_LGENG_CTL6, .value_a = 0x0022, .value_g = 0x0022, .flags = 0, }, */
/* { .offset = B2062_S_LGENG_CTL7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_LGENG_CTL8, .value_a = 0x0088, .value_g = 0x0080, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_LGENG_CTL8, .value_a = 0x0088, .value_g = 0x0080, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_LGENG_CTL9, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
- { .offset = B2062_S_LGENG_CTL10, .value_a = 0x0088, .value_g = 0x0080, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_LGENG_CTL10, .value_a = 0x0088, .value_g = 0x0080, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_LGENG_CTL11, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_REFPLL_CTL0, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_REFPLL_CTL1, .value_a = 0x0007, .value_g = 0x0007, .flags = 0, }, */
@@ -198,41 +199,41 @@
/* { .offset = B2062_S_REFPLL_CTL14, .value_a = 0x0075, .value_g = 0x0075, .flags = 0, }, */
/* { .offset = B2062_S_REFPLL_CTL15, .value_a = 0x00B4, .value_g = 0x00B4, .flags = 0, }, */
/* { .offset = B2062_S_REFPLL_CTL16, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_RFPLL_CTL0, .value_a = 0x0098, .value_g = 0x0098, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL1, .value_a = 0x0010, .value_g = 0x0010, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL0, .value_a = 0x0098, .value_g = 0x0098, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL1, .value_a = 0x0010, .value_g = 0x0010, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_RFPLL_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_RFPLL_CTL5, .value_a = 0x0043, .value_g = 0x0043, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL6, .value_a = 0x0047, .value_g = 0x0047, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL7, .value_a = 0x000C, .value_g = 0x000C, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL8, .value_a = 0x0011, .value_g = 0x0011, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL9, .value_a = 0x0011, .value_g = 0x0011, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL10, .value_a = 0x000E, .value_g = 0x000E, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL11, .value_a = 0x0008, .value_g = 0x0008, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL12, .value_a = 0x0033, .value_g = 0x0033, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL13, .value_a = 0x000A, .value_g = 0x000A, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL14, .value_a = 0x0006, .value_g = 0x0006, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL5, .value_a = 0x0043, .value_g = 0x0043, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL6, .value_a = 0x0047, .value_g = 0x0047, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL7, .value_a = 0x000C, .value_g = 0x000C, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL8, .value_a = 0x0011, .value_g = 0x0011, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL9, .value_a = 0x0011, .value_g = 0x0011, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL10, .value_a = 0x000E, .value_g = 0x000E, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL11, .value_a = 0x0008, .value_g = 0x0008, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL12, .value_a = 0x0033, .value_g = 0x0033, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL13, .value_a = 0x000A, .value_g = 0x000A, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL14, .value_a = 0x0006, .value_g = 0x0006, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_RFPLL_CTL15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL16, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL17, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_RFPLL_CTL18, .value_a = 0x003E, .value_g = 0x003E, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL19, .value_a = 0x0013, .value_g = 0x0013, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL18, .value_a = 0x003E, .value_g = 0x003E, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL19, .value_a = 0x0013, .value_g = 0x0013, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_RFPLL_CTL20, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_RFPLL_CTL21, .value_a = 0x0062, .value_g = 0x0062, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL22, .value_a = 0x0007, .value_g = 0x0007, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL23, .value_a = 0x0016, .value_g = 0x0016, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL24, .value_a = 0x005C, .value_g = 0x005C, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL25, .value_a = 0x0095, .value_g = 0x0095, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL21, .value_a = 0x0062, .value_g = 0x0062, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL22, .value_a = 0x0007, .value_g = 0x0007, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL23, .value_a = 0x0016, .value_g = 0x0016, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL24, .value_a = 0x005C, .value_g = 0x005C, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL25, .value_a = 0x0095, .value_g = 0x0095, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_RFPLL_CTL26, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL27, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL28, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RFPLL_CTL29, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_RFPLL_CTL30, .value_a = 0x00A0, .value_g = 0x00A0, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL31, .value_a = 0x0004, .value_g = 0x0004, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL30, .value_a = 0x00A0, .value_g = 0x00A0, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL31, .value_a = 0x0004, .value_g = 0x0004, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_RFPLL_CTL32, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
- { .offset = B2062_S_RFPLL_CTL33, .value_a = 0x00CC, .value_g = 0x00CC, .flags = B2062_FLAG_A | B2062_FLAG_G, },
- { .offset = B2062_S_RFPLL_CTL34, .value_a = 0x0007, .value_g = 0x0007, .flags = B2062_FLAG_A | B2062_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL33, .value_a = 0x00CC, .value_g = 0x00CC, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2062_S_RFPLL_CTL34, .value_a = 0x0007, .value_g = 0x0007, .flags = B206X_FLAG_A | B206X_FLAG_G, },
/* { .offset = B2062_S_RXG_CNT0, .value_a = 0x0010, .value_g = 0x0010, .flags = 0, }, */
/* { .offset = B2062_S_RXG_CNT1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RXG_CNT2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
@@ -241,7 +242,7 @@
/* { .offset = B2062_S_RXG_CNT5, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
/* { .offset = B2062_S_RXG_CNT6, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
/* { .offset = B2062_S_RXG_CNT7, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
- { .offset = B2062_S_RXG_CNT8, .value_a = 0x000F, .value_g = 0x000F, .flags = B2062_FLAG_A, },
+ { .offset = B2062_S_RXG_CNT8, .value_a = 0x000F, .value_g = 0x000F, .flags = B206X_FLAG_A, },
/* { .offset = B2062_S_RXG_CNT9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
/* { .offset = B2062_S_RXG_CNT10, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
/* { .offset = B2062_S_RXG_CNT11, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
@@ -253,19 +254,337 @@
/* { .offset = B2062_S_RXG_CNT17, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
};
+static const struct b206x_init_tab_entry b2063_init_tab[] = {
+ { .offset = B2063_COMM1, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ /* { .offset = B2063_COMM2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_COMM10, .value_a = 0x0001, .value_g = 0x0000, .flags = B206X_FLAG_A, },
+ /* { .offset = B2063_COMM11, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM12, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM13, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_COMM14, .value_a = 0x0006, .value_g = 0x0006, .flags = 0, }, */
+ /* { .offset = B2063_COMM15, .value_a = 0x000f, .value_g = 0x000f, .flags = 0, }, */
+ { .offset = B2063_COMM16, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM17, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM18, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM19, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM20, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM21, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM22, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM23, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ { .offset = B2063_COMM24, .value_a = 0x0000, .value_g = 0x0000, .flags = B206X_FLAG_G, },
+ /* { .offset = B2063_PWR_SWITCH_CTL, .value_a = 0x007f, .value_g = 0x007f, .flags = 0, }, */
+ /* { .offset = B2063_PLL_SP1, .value_a = 0x003f, .value_g = 0x003f, .flags = 0, }, */
+ /* { .offset = B2063_PLL_SP2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_LOGEN_SP1, .value_a = 0x00e8, .value_g = 0x00d4, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2063_LOGEN_SP2, .value_a = 0x00a7, .value_g = 0x0053, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_LOGEN_SP3, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ { .offset = B2063_LOGEN_SP4, .value_a = 0x00f0, .value_g = 0x000f, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_LOGEN_SP5, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+ { .offset = B2063_G_RX_SP1, .value_a = 0x001f, .value_g = 0x005e, .flags = B206X_FLAG_G, },
+ { .offset = B2063_G_RX_SP2, .value_a = 0x007f, .value_g = 0x007e, .flags = B206X_FLAG_G, },
+ { .offset = B2063_G_RX_SP3, .value_a = 0x0030, .value_g = 0x00f0, .flags = B206X_FLAG_G, },
+ /* { .offset = B2063_G_RX_SP4, .value_a = 0x0035, .value_g = 0x0035, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_SP5, .value_a = 0x003f, .value_g = 0x003f, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_SP6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_G_RX_SP7, .value_a = 0x007f, .value_g = 0x007f, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_G_RX_SP8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_SP9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_G_RX_SP10, .value_a = 0x000c, .value_g = 0x000c, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_G_RX_SP11, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_A_RX_SP1, .value_a = 0x003c, .value_g = 0x003f, .flags = B206X_FLAG_A, },
+ { .offset = B2063_A_RX_SP2, .value_a = 0x00fc, .value_g = 0x00fe, .flags = B206X_FLAG_A, },
+ /* { .offset = B2063_A_RX_SP3, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_SP4, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_SP5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_SP6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_A_RX_SP7, .value_a = 0x0008, .value_g = 0x0008, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_RX_BB_SP1, .value_a = 0x000f, .value_g = 0x000f, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_SP2, .value_a = 0x0022, .value_g = 0x0022, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_SP3, .value_a = 0x00a8, .value_g = 0x00a8, .flags = 0, }, */
+ { .offset = B2063_RX_BB_SP4, .value_a = 0x0060, .value_g = 0x0060, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_RX_BB_SP5, .value_a = 0x0011, .value_g = 0x0011, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_SP6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_SP7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_RX_BB_SP8, .value_a = 0x0030, .value_g = 0x0030, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_TX_RF_SP1, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP2, .value_a = 0x0003, .value_g = 0x0003, .flags = 0, }, */
+ { .offset = B2063_TX_RF_SP3, .value_a = 0x000c, .value_g = 0x000b, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2063_TX_RF_SP4, .value_a = 0x0010, .value_g = 0x000f, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_TX_RF_SP5, .value_a = 0x000f, .value_g = 0x000f, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP6, .value_a = 0x0080, .value_g = 0x0080, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP7, .value_a = 0x0068, .value_g = 0x0068, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP8, .value_a = 0x0068, .value_g = 0x0068, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP9, .value_a = 0x0080, .value_g = 0x0080, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP10, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP11, .value_a = 0x0003, .value_g = 0x0003, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP12, .value_a = 0x0038, .value_g = 0x0038, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP13, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP14, .value_a = 0x0038, .value_g = 0x0038, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP15, .value_a = 0x00c0, .value_g = 0x00c0, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP16, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_SP17, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ { .offset = B2063_PA_SP1, .value_a = 0x003d, .value_g = 0x00fd, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_PA_SP2, .value_a = 0x000c, .value_g = 0x000c, .flags = 0, }, */
+ /* { .offset = B2063_PA_SP3, .value_a = 0x0096, .value_g = 0x0096, .flags = 0, }, */
+ /* { .offset = B2063_PA_SP4, .value_a = 0x005a, .value_g = 0x005a, .flags = 0, }, */
+ /* { .offset = B2063_PA_SP5, .value_a = 0x007f, .value_g = 0x007f, .flags = 0, }, */
+ /* { .offset = B2063_PA_SP6, .value_a = 0x007f, .value_g = 0x007f, .flags = 0, }, */
+ /* { .offset = B2063_PA_SP7, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ { .offset = B2063_TX_BB_SP1, .value_a = 0x0002, .value_g = 0x0002, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_TX_BB_SP2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_BB_SP3, .value_a = 0x0030, .value_g = 0x0030, .flags = 0, }, */
+ /* { .offset = B2063_REG_SP1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_BANDGAP_CTL1, .value_a = 0x0056, .value_g = 0x0056, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_BANDGAP_CTL2, .value_a = 0x0006, .value_g = 0x0006, .flags = 0, }, */
+ /* { .offset = B2063_LPO_CTL1, .value_a = 0x000e, .value_g = 0x000e, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL1, .value_a = 0x007e, .value_g = 0x007e, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL2, .value_a = 0x0015, .value_g = 0x0015, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL3, .value_a = 0x000f, .value_g = 0x000f, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RC_CALIB_CTL10, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_CALNRST, .value_a = 0x0004, .value_g = 0x0004, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_IN_PLL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_IN_PLL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_CP1, .value_a = 0x00cf, .value_g = 0x00cf, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_CP2, .value_a = 0x0059, .value_g = 0x0059, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_CP3, .value_a = 0x0007, .value_g = 0x0007, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_CP4, .value_a = 0x0042, .value_g = 0x0042, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_LF1, .value_a = 0x00db, .value_g = 0x00db, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_LF2, .value_a = 0x0094, .value_g = 0x0094, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_LF3, .value_a = 0x0028, .value_g = 0x0028, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_LF4, .value_a = 0x0063, .value_g = 0x0063, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_SG1, .value_a = 0x0007, .value_g = 0x0007, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_SG2, .value_a = 0x00d3, .value_g = 0x00d3, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_SG3, .value_a = 0x00b1, .value_g = 0x00b1, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_SG4, .value_a = 0x003b, .value_g = 0x003b, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_SG5, .value_a = 0x0006, .value_g = 0x0006, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO1, .value_a = 0x0058, .value_g = 0x0058, .flags = 0, }, */
+ { .offset = B2063_PLL_JTAG_PLL_VCO2, .value_a = 0x00f7, .value_g = 0x00f7, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB3, .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB5, .value_a = 0x0009, .value_g = 0x0009, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB6, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB7, .value_a = 0x0016, .value_g = 0x0016, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB8, .value_a = 0x006b, .value_g = 0x006b, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_VCO_CALIB10, .value_a = 0x00b3, .value_g = 0x00b3, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_XTAL_12, .value_a = 0x0004, .value_g = 0x0004, .flags = 0, }, */
+ /* { .offset = B2063_PLL_JTAG_PLL_XTAL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_ACL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_ACL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_ACL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_ACL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_ACL5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_INPUTS, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_WAITCNT, .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVR1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVR2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL1, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL2, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL3, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL4, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL5, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL6, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_OVAL7, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CALVLD1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CALVLD2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LO_CALIB_CVAL7, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_CALIB_EN, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_PEAKDET1, .value_a = 0x00ff, .value_g = 0x00ff, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_RCCR1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_VCOBUF1, .value_a = 0x0060, .value_g = 0x0060, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_MIXER1, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_MIXER2, .value_a = 0x000c, .value_g = 0x000c, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_BUF1, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_BUF2, .value_a = 0x000c, .value_g = 0x000c, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_DIV1, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_DIV2, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_DIV3, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_CBUFRX1, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_CBUFRX2, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_CBUFTX1, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_CBUFTX2, .value_a = 0x0066, .value_g = 0x0066, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_IDAC1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_SPARE1, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_SPARE2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_LOGEN_SPARE3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_1ST1, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_1ST2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_1ST3, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND1, .value_a = 0x0030, .value_g = 0x0030, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND2, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND3, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND5, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND7, .value_a = 0x0035, .value_g = 0x0035, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_2ND8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_PS1, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_PS2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_PS3, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_PS4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_PS5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_MIX1, .value_a = 0x0044, .value_g = 0x0044, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_MIX2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_G_RX_MIX3, .value_a = 0x0071, .value_g = 0x0071, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2063_G_RX_MIX4, .value_a = 0x0071, .value_g = 0x0071, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_G_RX_MIX5, .value_a = 0x0003, .value_g = 0x0003, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_MIX6, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_MIX7, .value_a = 0x0044, .value_g = 0x0044, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_MIX8, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_PDET1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_SPARES1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_SPARES2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_G_RX_SPARES3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_1ST1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_A_RX_1ST2, .value_a = 0x00f0, .value_g = 0x0030, .flags = B206X_FLAG_A, },
+ /* { .offset = B2063_A_RX_1ST3, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_1ST4, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_1ST5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND1, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND4, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_2ND7, .value_a = 0x0005, .value_g = 0x0005, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_PS1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_PS2, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_PS3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_PS4, .value_a = 0x0033, .value_g = 0x0033, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_PS5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_A_RX_PS6, .value_a = 0x0077, .value_g = 0x0077, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_A_RX_MIX1, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_MIX2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_MIX3, .value_a = 0x0044, .value_g = 0x0044, .flags = 0, }, */
+ { .offset = B2063_A_RX_MIX4, .value_a = 0x0003, .value_g = 0x0003, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2063_A_RX_MIX5, .value_a = 0x000f, .value_g = 0x000f, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ { .offset = B2063_A_RX_MIX6, .value_a = 0x000f, .value_g = 0x000f, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_A_RX_MIX7, .value_a = 0x0044, .value_g = 0x0044, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_MIX8, .value_a = 0x0001, .value_g = 0x0001, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_PWRDET1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_SPARE1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_SPARE2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_A_RX_SPARE3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_RX_TIA_CTL1, .value_a = 0x0077, .value_g = 0x0077, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_RX_TIA_CTL2, .value_a = 0x0058, .value_g = 0x0058, .flags = 0, }, */
+ { .offset = B2063_RX_TIA_CTL3, .value_a = 0x0077, .value_g = 0x0077, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_RX_TIA_CTL4, .value_a = 0x0058, .value_g = 0x0058, .flags = 0, }, */
+ /* { .offset = B2063_RX_TIA_CTL5, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RX_TIA_CTL6, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL1, .value_a = 0x0074, .value_g = 0x0074, .flags = 0, }, */
+ { .offset = B2063_RX_BB_CTL2, .value_a = 0x0004, .value_g = 0x0004, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_RX_BB_CTL3, .value_a = 0x00a2, .value_g = 0x00a2, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL4, .value_a = 0x00aa, .value_g = 0x00aa, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL5, .value_a = 0x0024, .value_g = 0x0024, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL6, .value_a = 0x00a9, .value_g = 0x00a9, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL7, .value_a = 0x0028, .value_g = 0x0028, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL8, .value_a = 0x0010, .value_g = 0x0010, .flags = 0, }, */
+ /* { .offset = B2063_RX_BB_CTL9, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL1, .value_a = 0x0080, .value_g = 0x0080, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_IDAC_LO_RF_I, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_IDAC_LO_RF_Q, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_IDAC_LO_BB_I, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_IDAC_LO_BB_Q, .value_a = 0x0088, .value_g = 0x0088, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL2, .value_a = 0x0080, .value_g = 0x0080, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL3, .value_a = 0x0038, .value_g = 0x0038, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL4, .value_a = 0x00b8, .value_g = 0x00b8, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL5, .value_a = 0x0080, .value_g = 0x0080, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL6, .value_a = 0x0038, .value_g = 0x0038, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL7, .value_a = 0x0078, .value_g = 0x0078, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL8, .value_a = 0x00c0, .value_g = 0x00c0, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL9, .value_a = 0x0003, .value_g = 0x0003, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL10, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL14, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_RF_CTL15, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_PA_CTL1, .value_a = 0x0000, .value_g = 0x0004, .flags = B206X_FLAG_A, },
+ /* { .offset = B2063_PA_CTL2, .value_a = 0x000c, .value_g = 0x000c, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL3, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL4, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL5, .value_a = 0x0096, .value_g = 0x0096, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL6, .value_a = 0x0077, .value_g = 0x0077, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL7, .value_a = 0x005a, .value_g = 0x005a, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL8, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL9, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL10, .value_a = 0x0021, .value_g = 0x0021, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL11, .value_a = 0x0070, .value_g = 0x0070, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL12, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_PA_CTL13, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_BB_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_BB_CTL2, .value_a = 0x00b3, .value_g = 0x00b3, .flags = 0, }, */
+ /* { .offset = B2063_TX_BB_CTL3, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+ /* { .offset = B2063_TX_BB_CTL4, .value_a = 0x000b, .value_g = 0x000b, .flags = 0, }, */
+ /* { .offset = B2063_GPIO_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ { .offset = B2063_VREG_CTL1, .value_a = 0x0003, .value_g = 0x0003, .flags = B206X_FLAG_A | B206X_FLAG_G, },
+ /* { .offset = B2063_AMUX_CTL1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_IQ_CALIB_GVAR, .value_a = 0x00b3, .value_g = 0x00b3, .flags = 0, }, */
+ /* { .offset = B2063_IQ_CALIB_CTL1, .value_a = 0x0055, .value_g = 0x0055, .flags = 0, }, */
+ /* { .offset = B2063_IQ_CALIB_CTL2, .value_a = 0x0030, .value_g = 0x0030, .flags = 0, }, */
+ /* { .offset = B2063_TEMPSENSE_CTL1, .value_a = 0x0046, .value_g = 0x0046, .flags = 0, }, */
+ /* { .offset = B2063_TEMPSENSE_CTL2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_RX_LOOPBACK1, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_TX_RX_LOOPBACK2, .value_a = 0x0000, .value_g = 0x0000, .flags = 0, }, */
+ /* { .offset = B2063_EXT_TSSI_CTL1, .value_a = 0x0021, .value_g = 0x0021, .flags = 0, }, */
+ /* { .offset = B2063_EXT_TSSI_CTL2, .value_a = 0x0023, .value_g = 0x0023, .flags = 0, }, */
+ /* { .offset = B2063_AFE_CTL , .value_a = 0x0002, .value_g = 0x0002, .flags = 0, }, */
+};
+
void b2062_upload_init_table(struct b43_wldev *dev)
{
- const struct b2062_init_tab_entry *e;
+ const struct b206x_init_tab_entry *e;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(b2062_init_tab); i++) {
e = &b2062_init_tab[i];
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
- if (!(e->flags & B2062_FLAG_G))
+ if (!(e->flags & B206X_FLAG_G))
continue;
b43_radio_write(dev, e->offset, e->value_g);
} else {
- if (!(e->flags & B2062_FLAG_A))
+ if (!(e->flags & B206X_FLAG_A))
+ continue;
+ b43_radio_write(dev, e->offset, e->value_a);
+ }
+ }
+}
+
+void b2063_upload_init_table(struct b43_wldev *dev)
+{
+ const struct b206x_init_tab_entry *e;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(b2063_init_tab); i++) {
+ e = &b2063_init_tab[i];
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ if (!(e->flags & B206X_FLAG_G))
+ continue;
+ b43_radio_write(dev, e->offset, e->value_g);
+ } else {
+ if (!(e->flags & B206X_FLAG_A))
continue;
b43_radio_write(dev, e->offset, e->value_a);
}
@@ -306,30 +625,35 @@
void b43_lptab_read_bulk(struct b43_wldev *dev, u32 offset,
unsigned int nr_elements, void *_data)
{
- u32 type, value;
+ u32 type;
u8 *data = _data;
unsigned int i;
type = offset & B43_LPTAB_TYPEMASK;
+ offset &= ~B43_LPTAB_TYPEMASK;
+ B43_WARN_ON(offset > 0xFFFF);
+
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+
for (i = 0; i < nr_elements; i++) {
- value = b43_lptab_read(dev, offset);
switch (type) {
case B43_LPTAB_8BIT:
- *data = value;
+ *data = b43_phy_read(dev, B43_LPPHY_TABLEDATALO) & 0xFF;
data++;
break;
case B43_LPTAB_16BIT:
- *((u16 *)data) = value;
+ *((u16 *)data) = b43_phy_read(dev, B43_LPPHY_TABLEDATALO);
data += 2;
break;
case B43_LPTAB_32BIT:
- *((u32 *)data) = value;
+ *((u32 *)data) = b43_phy_read(dev, B43_LPPHY_TABLEDATAHI);
+ *((u32 *)data) <<= 16;
+ *((u32 *)data) |= b43_phy_read(dev, B43_LPPHY_TABLEDATALO);
data += 4;
break;
default:
B43_WARN_ON(1);
}
- offset++;
}
}
@@ -370,25 +694,1764 @@
unsigned int i;
type = offset & B43_LPTAB_TYPEMASK;
+ offset &= ~B43_LPTAB_TYPEMASK;
+ B43_WARN_ON(offset > 0xFFFF);
+
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+
for (i = 0; i < nr_elements; i++) {
switch (type) {
case B43_LPTAB_8BIT:
value = *data;
data++;
+ B43_WARN_ON(value & ~0xFF);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
break;
case B43_LPTAB_16BIT:
value = *((u16 *)data);
data += 2;
+ B43_WARN_ON(value & ~0xFFFF);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
break;
case B43_LPTAB_32BIT:
value = *((u32 *)data);
data += 4;
+ b43_phy_write(dev, B43_LPPHY_TABLEDATAHI, value >> 16);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
break;
default:
B43_WARN_ON(1);
- value = 0;
}
- b43_lptab_write(dev, offset, value);
- offset++;
+ }
+}
+
+static const u8 lpphy_min_sig_sq_table[] = {
+ 0xde, 0xdc, 0xda, 0xd8, 0xd6, 0xd4, 0xd2, 0xcf, 0xcd,
+ 0xca, 0xc7, 0xc4, 0xc1, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0x00,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe, 0xbe,
+ 0xbe, 0xbe, 0xbe, 0xbe, 0xc1, 0xc4, 0xc7, 0xca, 0xcd,
+ 0xcf, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc, 0xde,
+};
+
+static const u16 lpphy_rev01_noise_scale_table[] = {
+ 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4,
+ 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa400, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4,
+ 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0xa4a4, 0x00a4,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x4c00, 0x2d36,
+ 0x0000, 0x0000, 0x4c00, 0x2d36,
+};
+
+static const u16 lpphy_rev2plus_noise_scale_table[] = {
+ 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4,
+ 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4,
+ 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x0000,
+ 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4,
+ 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4,
+ 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4, 0x00a4,
+ 0x00a4,
+};
+
+static const u16 lpphy_crs_gain_nft_table[] = {
+ 0x0366, 0x036a, 0x036f, 0x0364, 0x0367, 0x036d, 0x0374, 0x037f, 0x036f,
+ 0x037b, 0x038a, 0x0378, 0x0367, 0x036d, 0x0375, 0x0381, 0x0374, 0x0381,
+ 0x0392, 0x03a9, 0x03c4, 0x03e1, 0x0001, 0x001f, 0x0040, 0x005e, 0x007f,
+ 0x009e, 0x00bd, 0x00dd, 0x00fd, 0x011d, 0x013d,
+};
+
+static const u16 lpphy_rev01_filter_control_table[] = {
+ 0xa0fc, 0x10fc, 0x10db, 0x20b7, 0xff93, 0x10bf, 0x109b, 0x2077, 0xff53,
+ 0x0127,
+};
+
+static const u32 lpphy_rev2plus_filter_control_table[] = {
+ 0x000141fc, 0x000021fc, 0x000021b7, 0x0000416f, 0x0001ff27, 0x0000217f,
+ 0x00002137, 0x000040ef, 0x0001fea7, 0x0000024f,
+};
+
+static const u32 lpphy_rev01_ps_control_table[] = {
+ 0x00010000, 0x000000a0, 0x00040000, 0x00000048, 0x08080101, 0x00000080,
+ 0x08080101, 0x00000040, 0x08080101, 0x000000c0, 0x08a81501, 0x000000c0,
+ 0x0fe8fd01, 0x000000c0, 0x08300105, 0x000000c0, 0x08080201, 0x000000c0,
+ 0x08280205, 0x000000c0, 0xe80802fe, 0x000000c7, 0x28080206, 0x000000c0,
+ 0x08080202, 0x000000c0, 0x0ba87602, 0x000000c0, 0x1068013d, 0x000000c0,
+ 0x10280105, 0x000000c0, 0x08880102, 0x000000c0, 0x08280106, 0x000000c0,
+ 0xe80801fd, 0x000000c7, 0xa8080115, 0x000000c0,
+};
+
+static const u32 lpphy_rev2plus_ps_control_table[] = {
+ 0x00e38e08, 0x00e08e38, 0x00000000, 0x00000000, 0x00000000, 0x00002080,
+ 0x00006180, 0x00003002, 0x00000040, 0x00002042, 0x00180047, 0x00080043,
+ 0x00000041, 0x000020c1, 0x00046006, 0x00042002, 0x00040000, 0x00002003,
+ 0x00180006, 0x00080002,
+};
+
+static const u8 lpphy_pll_fraction_table[] = {
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+};
+
+static const u16 lpphy_iqlo_cal_table[] = {
+ 0x0200, 0x0300, 0x0400, 0x0600, 0x0800, 0x0b00, 0x1000, 0x1001, 0x1002,
+ 0x1003, 0x1004, 0x1005, 0x1006, 0x1007, 0x1707, 0x2007, 0x2d07, 0x4007,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0200, 0x0300, 0x0400, 0x0600,
+ 0x0800, 0x0b00, 0x1000, 0x1001, 0x1002, 0x1003, 0x1004, 0x1005, 0x1006,
+ 0x1007, 0x1707, 0x2007, 0x2d07, 0x4007, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x4000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const u16 lpphy_rev0_ofdm_cck_gain_table[] = {
+ 0x0001, 0x0001, 0x0001, 0x0001, 0x1001, 0x2001, 0x3001, 0x4001, 0x5001,
+ 0x6001, 0x7001, 0x7011, 0x7021, 0x2035, 0x2045, 0x2055, 0x2065, 0x2075,
+ 0x006d, 0x007d, 0x014d, 0x015d, 0x115d, 0x035d, 0x135d, 0x055d, 0x155d,
+ 0x0d5d, 0x1d5d, 0x2d5d, 0x555d, 0x655d, 0x755d,
+};
+
+static const u16 lpphy_rev1_ofdm_cck_gain_table[] = {
+ 0x5000, 0x6000, 0x7000, 0x0001, 0x1001, 0x2001, 0x3001, 0x4001, 0x5001,
+ 0x6001, 0x7001, 0x7011, 0x7021, 0x2035, 0x2045, 0x2055, 0x2065, 0x2075,
+ 0x006d, 0x007d, 0x014d, 0x015d, 0x115d, 0x035d, 0x135d, 0x055d, 0x155d,
+ 0x0d5d, 0x1d5d, 0x2d5d, 0x555d, 0x655d, 0x755d,
+};
+
+static const u16 lpphy_gain_delta_table[] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const u32 lpphy_tx_power_control_table[] = {
+ 0x00000050, 0x0000004f, 0x0000004e, 0x0000004d, 0x0000004c, 0x0000004b,
+ 0x0000004a, 0x00000049, 0x00000048, 0x00000047, 0x00000046, 0x00000045,
+ 0x00000044, 0x00000043, 0x00000042, 0x00000041, 0x00000040, 0x0000003f,
+ 0x0000003e, 0x0000003d, 0x0000003c, 0x0000003b, 0x0000003a, 0x00000039,
+ 0x00000038, 0x00000037, 0x00000036, 0x00000035, 0x00000034, 0x00000033,
+ 0x00000032, 0x00000031, 0x00000030, 0x0000002f, 0x0000002e, 0x0000002d,
+ 0x0000002c, 0x0000002b, 0x0000002a, 0x00000029, 0x00000028, 0x00000027,
+ 0x00000026, 0x00000025, 0x00000024, 0x00000023, 0x00000022, 0x00000021,
+ 0x00000020, 0x0000001f, 0x0000001e, 0x0000001d, 0x0000001c, 0x0000001b,
+ 0x0000001a, 0x00000019, 0x00000018, 0x00000017, 0x00000016, 0x00000015,
+ 0x00000014, 0x00000013, 0x00000012, 0x00000011, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x000075a0, 0x000075a0, 0x000075a1, 0x000075a1, 0x000075a2, 0x000075a2,
+ 0x000075a3, 0x000075a3, 0x000074b0, 0x000074b0, 0x000074b1, 0x000074b1,
+ 0x000074b2, 0x000074b2, 0x000074b3, 0x000074b3, 0x00006d20, 0x00006d20,
+ 0x00006d21, 0x00006d21, 0x00006d22, 0x00006d22, 0x00006d23, 0x00006d23,
+ 0x00004660, 0x00004660, 0x00004661, 0x00004661, 0x00004662, 0x00004662,
+ 0x00004663, 0x00004663, 0x00003e60, 0x00003e60, 0x00003e61, 0x00003e61,
+ 0x00003e62, 0x00003e62, 0x00003e63, 0x00003e63, 0x00003660, 0x00003660,
+ 0x00003661, 0x00003661, 0x00003662, 0x00003662, 0x00003663, 0x00003663,
+ 0x00002e60, 0x00002e60, 0x00002e61, 0x00002e61, 0x00002e62, 0x00002e62,
+ 0x00002e63, 0x00002e63, 0x00002660, 0x00002660, 0x00002661, 0x00002661,
+ 0x00002662, 0x00002662, 0x00002663, 0x00002663, 0x000025e0, 0x000025e0,
+ 0x000025e1, 0x000025e1, 0x000025e2, 0x000025e2, 0x000025e3, 0x000025e3,
+ 0x00001de0, 0x00001de0, 0x00001de1, 0x00001de1, 0x00001de2, 0x00001de2,
+ 0x00001de3, 0x00001de3, 0x00001d60, 0x00001d60, 0x00001d61, 0x00001d61,
+ 0x00001d62, 0x00001d62, 0x00001d63, 0x00001d63, 0x00001560, 0x00001560,
+ 0x00001561, 0x00001561, 0x00001562, 0x00001562, 0x00001563, 0x00001563,
+ 0x00000d60, 0x00000d60, 0x00000d61, 0x00000d61, 0x00000d62, 0x00000d62,
+ 0x00000d63, 0x00000d63, 0x00000ce0, 0x00000ce0, 0x00000ce1, 0x00000ce1,
+ 0x00000ce2, 0x00000ce2, 0x00000ce3, 0x00000ce3, 0x00000e10, 0x00000e10,
+ 0x00000e11, 0x00000e11, 0x00000e12, 0x00000e12, 0x00000e13, 0x00000e13,
+ 0x00000bf0, 0x00000bf0, 0x00000bf1, 0x00000bf1, 0x00000bf2, 0x00000bf2,
+ 0x00000bf3, 0x00000bf3, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x04200000, 0x04000000,
+ 0x04200000, 0x04000000, 0x04200000, 0x04000000, 0x000000ff, 0x000002fc,
+ 0x0000fa08, 0x00000305, 0x00000206, 0x00000304, 0x0000fb04, 0x0000fcff,
+ 0x000005fb, 0x0000fd01, 0x00000401, 0x00000006, 0x0000ff03, 0x000007fc,
+ 0x0000fc08, 0x00000203, 0x0000fffb, 0x00000600, 0x0000fa01, 0x0000fc03,
+ 0x0000fe06, 0x0000fe00, 0x00000102, 0x000007fd, 0x000004fb, 0x000006ff,
+ 0x000004fd, 0x0000fdfa, 0x000007fb, 0x0000fdfa, 0x0000fa06, 0x00000500,
+ 0x0000f902, 0x000007fa, 0x0000fafa, 0x00000500, 0x000007fa, 0x00000700,
+ 0x00000305, 0x000004ff, 0x00000801, 0x00000503, 0x000005f9, 0x00000404,
+ 0x0000fb08, 0x000005fd, 0x00000501, 0x00000405, 0x0000fb03, 0x000007fc,
+ 0x00000403, 0x00000303, 0x00000402, 0x0000faff, 0x0000fe05, 0x000005fd,
+ 0x0000fe01, 0x000007fa, 0x00000202, 0x00000504, 0x00000102, 0x000008fe,
+ 0x0000fa04, 0x0000fafc, 0x0000fe08, 0x000000f9, 0x000002fa, 0x000003fe,
+ 0x00000304, 0x000004f9, 0x00000100, 0x0000fd06, 0x000008fc, 0x00000701,
+ 0x00000504, 0x0000fdfe, 0x0000fdfc, 0x000003fe, 0x00000704, 0x000002fc,
+ 0x000004f9, 0x0000fdfd, 0x0000fa07, 0x00000205, 0x000003fd, 0x000005fb,
+ 0x000004f9, 0x00000804, 0x0000fc06, 0x0000fcf9, 0x00000100, 0x0000fe05,
+ 0x00000408, 0x0000fb02, 0x00000304, 0x000006fe, 0x000004fa, 0x00000305,
+ 0x000008fc, 0x00000102, 0x000001fd, 0x000004fc, 0x0000fe03, 0x00000701,
+ 0x000001fb, 0x000001f9, 0x00000206, 0x000006fd, 0x00000508, 0x00000700,
+ 0x00000304, 0x000005fe, 0x000005ff, 0x0000fa04, 0x00000303, 0x0000fefb,
+ 0x000007f9, 0x0000fefc, 0x000004fd, 0x000005fc, 0x0000fffd, 0x0000fc08,
+ 0x0000fbf9, 0x0000fd07, 0x000008fb, 0x0000fe02, 0x000006fb, 0x00000702,
+};
+
+static const u32 lpphy_gain_idx_table[] = {
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x10000001, 0x00000000, 0x20000082, 0x00000000, 0x40000104, 0x00000000,
+ 0x60004207, 0x00000001, 0x7000838a, 0x00000001, 0xd021050d, 0x00000001,
+ 0xe041c683, 0x00000001, 0x50828805, 0x00000000, 0x80e34288, 0x00000000,
+ 0xb144040b, 0x00000000, 0xe1a6058e, 0x00000000, 0x12064711, 0x00000001,
+ 0xb0a18612, 0x00000010, 0xe1024794, 0x00000010, 0x11630915, 0x00000011,
+ 0x31c3ca1b, 0x00000011, 0xc1848a9c, 0x00000018, 0xf1e50da0, 0x00000018,
+ 0x22468e21, 0x00000019, 0x4286d023, 0x00000019, 0xa347d0a4, 0x00000019,
+ 0xb36811a6, 0x00000019, 0xf3e89227, 0x00000019, 0x0408d329, 0x0000001a,
+ 0x244953aa, 0x0000001a, 0x346994ab, 0x0000001a, 0x54aa152c, 0x0000001a,
+ 0x64ca55ad, 0x0000001a, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x10000001, 0x00000000, 0x20000082, 0x00000000,
+ 0x40000104, 0x00000000, 0x60004207, 0x00000001, 0x7000838a, 0x00000001,
+ 0xd021050d, 0x00000001, 0xe041c683, 0x00000001, 0x50828805, 0x00000000,
+ 0x80e34288, 0x00000000, 0xb144040b, 0x00000000, 0xe1a6058e, 0x00000000,
+ 0x12064711, 0x00000001, 0xb0a18612, 0x00000010, 0xe1024794, 0x00000010,
+ 0x11630915, 0x00000011, 0x31c3ca1b, 0x00000011, 0xc1848a9c, 0x00000018,
+ 0xf1e50da0, 0x00000018, 0x22468e21, 0x00000019, 0x4286d023, 0x00000019,
+ 0xa347d0a4, 0x00000019, 0xb36811a6, 0x00000019, 0xf3e89227, 0x00000019,
+ 0x0408d329, 0x0000001a, 0x244953aa, 0x0000001a, 0x346994ab, 0x0000001a,
+ 0x54aa152c, 0x0000001a, 0x64ca55ad, 0x0000001a,
+};
+
+static const u16 lpphy_aux_gain_idx_table[] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0001, 0x0002, 0x0004, 0x0016, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0001, 0x0002, 0x0004, 0x0016,
+};
+
+static const u32 lpphy_gain_value_table[] = {
+ 0x00000008, 0x0000000e, 0x00000014, 0x0000001a, 0x000000fb, 0x00000004,
+ 0x00000008, 0x0000000d, 0x00000001, 0x00000004, 0x00000007, 0x0000000a,
+ 0x0000000d, 0x00000010, 0x00000012, 0x00000015, 0x00000000, 0x00000006,
+ 0x0000000c, 0x00000000, 0x00000000, 0x00000000, 0x00000012, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000018, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x0000001e, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000003, 0x00000006, 0x00000009, 0x0000000c, 0x0000000f,
+ 0x00000012, 0x00000015, 0x00000018, 0x0000001b, 0x0000001e, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000009, 0x000000f1,
+ 0x00000000, 0x00000000,
+};
+
+static const u16 lpphy_gain_table[] = {
+ 0x0000, 0x0400, 0x0800, 0x0802, 0x0804, 0x0806, 0x0807, 0x0808, 0x080a,
+ 0x080b, 0x080c, 0x080e, 0x080f, 0x0810, 0x0812, 0x0813, 0x0814, 0x0816,
+ 0x0817, 0x081a, 0x081b, 0x081f, 0x0820, 0x0824, 0x0830, 0x0834, 0x0837,
+ 0x083b, 0x083f, 0x0840, 0x0844, 0x0857, 0x085b, 0x085f, 0x08d7, 0x08db,
+ 0x08df, 0x0957, 0x095b, 0x095f, 0x0b57, 0x0b5b, 0x0b5f, 0x0f5f, 0x135f,
+ 0x175f, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const u32 lpphy_a0_gain_idx_table[] = {
+ 0x001111e0, 0x00652051, 0x00606055, 0x005b005a, 0x00555060, 0x00511065,
+ 0x004c806b, 0x0047d072, 0x00444078, 0x00400080, 0x003ca087, 0x0039408f,
+ 0x0035e098, 0x0032e0a1, 0x003030aa, 0x002d80b4, 0x002ae0bf, 0x002880ca,
+ 0x002640d6, 0x002410e3, 0x002220f0, 0x002020ff, 0x001e510e, 0x001ca11e,
+ 0x001b012f, 0x00199140, 0x00182153, 0x0016c168, 0x0015817d, 0x00145193,
+ 0x001321ab, 0x001211c5, 0x001111e0, 0x001021fc, 0x000f321a, 0x000e523a,
+ 0x000d925c, 0x000cd27f, 0x000c12a5, 0x000b62cd, 0x000ac2f8, 0x000a2325,
+ 0x00099355, 0x00091387, 0x000883bd, 0x000813f5, 0x0007a432, 0x00073471,
+ 0x0006c4b5, 0x000664fc, 0x00061547, 0x0005b598, 0x000565ec, 0x00051646,
+ 0x0004d6a5, 0x0004870a, 0x00044775, 0x000407e6, 0x0003d85e, 0x000398dd,
+ 0x00036963, 0x000339f2, 0x00030a89, 0x0002db28,
+};
+
+static const u16 lpphy_a0_aux_gain_idx_table[] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0002, 0x0014, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0002, 0x0014,
+};
+
+static const u32 lpphy_a0_gain_value_table[] = {
+ 0x00000008, 0x0000000e, 0x00000014, 0x0000001a, 0x000000fb, 0x00000004,
+ 0x00000008, 0x0000000d, 0x00000001, 0x00000004, 0x00000007, 0x0000000a,
+ 0x0000000d, 0x00000010, 0x00000012, 0x00000015, 0x00000000, 0x00000006,
+ 0x0000000c, 0x00000000, 0x00000000, 0x00000000, 0x00000012, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000018, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x0000001e, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000003, 0x00000006, 0x00000009, 0x0000000c, 0x0000000f,
+ 0x00000012, 0x00000015, 0x00000018, 0x0000001b, 0x0000001e, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x0000000f, 0x000000f7,
+ 0x00000000, 0x00000000,
+};
+
+static const u16 lpphy_a0_gain_table[] = {
+ 0x0000, 0x0002, 0x0004, 0x0006, 0x0007, 0x0008, 0x000a, 0x000b, 0x000c,
+ 0x000e, 0x000f, 0x0010, 0x0012, 0x0013, 0x0014, 0x0016, 0x0017, 0x001a,
+ 0x001b, 0x001f, 0x0020, 0x0024, 0x0030, 0x0034, 0x0037, 0x003b, 0x003f,
+ 0x0040, 0x0044, 0x0057, 0x005b, 0x005f, 0x00d7, 0x00db, 0x00df, 0x0157,
+ 0x015b, 0x015f, 0x0357, 0x035b, 0x035f, 0x075f, 0x0b5f, 0x0f5f, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const u16 lpphy_sw_control_table[] = {
+ 0x0128, 0x0128, 0x0009, 0x0009, 0x0028, 0x0028, 0x0028, 0x0028, 0x0128,
+ 0x0128, 0x0009, 0x0009, 0x0028, 0x0028, 0x0028, 0x0028, 0x0009, 0x0009,
+ 0x0009, 0x0009, 0x0009, 0x0009, 0x0009, 0x0009, 0x0018, 0x0018, 0x0018,
+ 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0128, 0x0128, 0x0009, 0x0009,
+ 0x0028, 0x0028, 0x0028, 0x0028, 0x0128, 0x0128, 0x0009, 0x0009, 0x0028,
+ 0x0028, 0x0028, 0x0028, 0x0009, 0x0009, 0x0009, 0x0009, 0x0009, 0x0009,
+ 0x0009, 0x0009, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018, 0x0018,
+ 0x0018,
+};
+
+static const u8 lpphy_hf_table[] = {
+ 0x4b, 0x36, 0x24, 0x18, 0x49, 0x34, 0x23, 0x17, 0x48,
+ 0x33, 0x23, 0x17, 0x48, 0x33, 0x23, 0x17,
+};
+
+static const u32 lpphy_papd_eps_table[] = {
+ 0x00000000, 0x00013ffc, 0x0001dff3, 0x0001bff0, 0x00023fe9, 0x00021fdf,
+ 0x00028fdf, 0x00033fd2, 0x00039fcb, 0x00043fc7, 0x0004efc2, 0x00055fb5,
+ 0x0005cfb0, 0x00063fa8, 0x00068fa3, 0x00071f98, 0x0007ef92, 0x00084f8b,
+ 0x0008df82, 0x00097f77, 0x0009df69, 0x000a3f62, 0x000adf57, 0x000b6f4c,
+ 0x000bff41, 0x000c9f39, 0x000cff30, 0x000dbf27, 0x000e4f1e, 0x000edf16,
+ 0x000f7f13, 0x00102f11, 0x00110f10, 0x0011df11, 0x0012ef15, 0x00143f1c,
+ 0x00158f27, 0x00172f35, 0x00193f47, 0x001baf5f, 0x001e6f7e, 0x0021cfa4,
+ 0x0025bfd2, 0x002a2008, 0x002fb047, 0x00360090, 0x003d40e0, 0x0045c135,
+ 0x004fb189, 0x005ae1d7, 0x0067221d, 0x0075025a, 0x007ff291, 0x007ff2bf,
+ 0x007ff2e3, 0x007ff2ff, 0x007ff315, 0x007ff329, 0x007ff33f, 0x007ff356,
+ 0x007ff36e, 0x007ff39c, 0x007ff441, 0x007ff506,
+};
+
+static const u32 lpphy_papd_mult_table[] = {
+ 0x001111e0, 0x00652051, 0x00606055, 0x005b005a, 0x00555060, 0x00511065,
+ 0x004c806b, 0x0047d072, 0x00444078, 0x00400080, 0x003ca087, 0x0039408f,
+ 0x0035e098, 0x0032e0a1, 0x003030aa, 0x002d80b4, 0x002ae0bf, 0x002880ca,
+ 0x002640d6, 0x002410e3, 0x002220f0, 0x002020ff, 0x001e510e, 0x001ca11e,
+ 0x001b012f, 0x00199140, 0x00182153, 0x0016c168, 0x0015817d, 0x00145193,
+ 0x001321ab, 0x001211c5, 0x001111e0, 0x001021fc, 0x000f321a, 0x000e523a,
+ 0x000d925c, 0x000cd27f, 0x000c12a5, 0x000b62cd, 0x000ac2f8, 0x000a2325,
+ 0x00099355, 0x00091387, 0x000883bd, 0x000813f5, 0x0007a432, 0x00073471,
+ 0x0006c4b5, 0x000664fc, 0x00061547, 0x0005b598, 0x000565ec, 0x00051646,
+ 0x0004d6a5, 0x0004870a, 0x00044775, 0x000407e6, 0x0003d85e, 0x000398dd,
+ 0x00036963, 0x000339f2, 0x00030a89, 0x0002db28,
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev0_nopa_tx_gain_table[] = {
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 152, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 147, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 143, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 139, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 135, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 131, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 128, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 124, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 121, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 117, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 114, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 111, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 107, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 104, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 101, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 99, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 96, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 93, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 90, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 88, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 85, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 83, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 81, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 78, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 76, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 74, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 73, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 73, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 71, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev0_2ghz_tx_gain_table[] = {
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 73, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 71, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 69, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 67, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 73, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 71, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 69, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 67, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 10, .pad = 5, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 9, .pad = 5, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 71, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 69, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 67, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 9, .pad = 4, .dac = 0, .bb_mult = 58, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 8, .pad = 4, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 7, .pad = 4, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 7, .pad = 4, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 7, .pad = 4, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 7, .pad = 4, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 7, .pad = 4, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 7, .pad = 4, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 7, .pad = 3, .dac = 0, .bb_mult = 67, },
+ { .gm = 4, .pga = 7, .pad = 3, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 7, .pad = 3, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 7, .pad = 3, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 7, .pad = 3, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 6, .pad = 3, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 6, .pad = 3, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 6, .pad = 3, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 6, .pad = 3, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 6, .pad = 3, .dac = 0, .bb_mult = 58, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 5, .pad = 3, .dac = 0, .bb_mult = 57, },
+ { .gm = 4, .pga = 4, .pad = 2, .dac = 0, .bb_mult = 83, },
+ { .gm = 4, .pga = 4, .pad = 2, .dac = 0, .bb_mult = 81, },
+ { .gm = 4, .pga = 4, .pad = 2, .dac = 0, .bb_mult = 78, },
+ { .gm = 4, .pga = 4, .pad = 2, .dac = 0, .bb_mult = 76, },
+ { .gm = 4, .pga = 4, .pad = 2, .dac = 0, .bb_mult = 74, },
+ { .gm = 4, .pga = 4, .pad = 2, .dac = 0, .bb_mult = 72, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev0_5ghz_tx_gain_table[] = {
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 99, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 96, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 93, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 90, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 88, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 85, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 83, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 81, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 78, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 76, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 74, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 55, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 55, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 73, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 60, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev1_nopa_tx_gain_table[] = {
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 152, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 147, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 143, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 139, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 135, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 131, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 128, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 124, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 121, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 117, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 114, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 111, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 107, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 104, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 101, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 99, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 96, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 93, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 90, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 88, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 85, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 83, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 81, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 78, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 76, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 74, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 73, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 73, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 71, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev1_2ghz_tx_gain_table[] = {
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 90, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 88, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 85, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 83, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 81, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 78, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 76, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 74, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 73, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 71, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 69, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 67, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 73, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 71, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 69, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 67, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 65, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 63, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 61, },
+ { .gm = 4, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 60, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 72, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 70, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 68, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 66, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 64, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 62, },
+ { .gm = 4, .pga = 10, .pad = 6, .dac = 0, .bb_mult = 60, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev1_5ghz_tx_gain_table[] = {
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 99, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 96, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 93, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 90, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 88, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 85, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 83, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 81, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 78, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 76, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 74, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 15, .dac = 0, .bb_mult = 55, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 55, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 13, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 72, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 12, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 73, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 11, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 71, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 15, .pad = 10, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 15, .pad = 9, .dac = 0, .bb_mult = 56, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 14, .pad = 9, .dac = 0, .bb_mult = 58, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 9, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 60, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 13, .pad = 8, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 8, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 12, .pad = 7, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 70, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 68, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 66, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 61, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 59, },
+ { .gm = 7, .pga = 11, .pad = 7, .dac = 0, .bb_mult = 57, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 69, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 67, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 65, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 63, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 62, },
+ { .gm = 7, .pga = 11, .pad = 6, .dac = 0, .bb_mult = 60, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev2_nopa_tx_gain_table[] = {
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 152, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 147, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 143, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 139, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 135, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 131, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 128, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 124, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 121, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 117, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 114, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 111, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 107, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 104, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 101, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 99, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 96, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 93, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 90, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 88, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 85, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 83, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 81, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 78, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 76, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 74, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 72, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 70, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 68, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 66, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 197, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 192, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 186, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 181, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 176, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 171, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 166, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 161, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 157, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 152, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 148, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 144, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 140, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 136, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 132, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 128, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 124, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 121, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 117, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 114, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 111, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 108, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 105, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 102, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 99, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 96, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 93, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 91, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 88, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 86, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 83, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 81, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 79, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 76, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 74, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 72, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 70, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 68, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 66, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 64, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 248, .pad = 64, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 248, .pad = 62, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 241, .pad = 62, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 241, .pad = 60, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 234, .pad = 60, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 234, .pad = 59, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 227, .pad = 59, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 227, .pad = 57, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 221, .pad = 57, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 221, .pad = 55, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 215, .pad = 55, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 215, .pad = 54, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 208, .pad = 54, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 208, .pad = 52, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 203, .pad = 52, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 203, .pad = 51, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 197, .pad = 51, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 197, .pad = 49, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 191, .pad = 49, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 191, .pad = 48, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 186, .pad = 48, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 186, .pad = 47, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 181, .pad = 47, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 181, .pad = 45, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 175, .pad = 45, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 175, .pad = 44, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 170, .pad = 44, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 170, .pad = 43, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 166, .pad = 43, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 166, .pad = 42, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 161, .pad = 42, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 161, .pad = 40, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 156, .pad = 40, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 156, .pad = 39, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 152, .pad = 39, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 152, .pad = 38, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 148, .pad = 38, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 148, .pad = 37, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 143, .pad = 37, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 143, .pad = 36, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 139, .pad = 36, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 139, .pad = 35, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 135, .pad = 35, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 135, .pad = 34, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 132, .pad = 34, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 132, .pad = 33, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 128, .pad = 33, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 128, .pad = 32, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 124, .pad = 32, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 124, .pad = 31, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 121, .pad = 31, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 121, .pad = 30, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 117, .pad = 30, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 117, .pad = 29, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 114, .pad = 29, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 114, .pad = 29, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 111, .pad = 29, .dac = 0, .bb_mult = 64, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev2_2ghz_tx_gain_table[] = {
+ { .gm = 7, .pga = 99, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 96, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 93, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 90, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 88, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 85, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 83, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 81, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 78, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 76, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 74, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 72, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 70, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 68, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 66, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 64, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 64, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 62, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 62, .pad = 248, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 60, .pad = 248, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 60, .pad = 241, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 59, .pad = 241, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 59, .pad = 234, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 57, .pad = 234, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 57, .pad = 227, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 55, .pad = 227, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 55, .pad = 221, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 54, .pad = 221, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 54, .pad = 215, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 52, .pad = 215, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 52, .pad = 208, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 51, .pad = 208, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 51, .pad = 203, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 49, .pad = 203, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 49, .pad = 197, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 48, .pad = 197, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 48, .pad = 191, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 47, .pad = 191, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 47, .pad = 186, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 45, .pad = 186, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 45, .pad = 181, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 44, .pad = 181, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 44, .pad = 175, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 43, .pad = 175, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 43, .pad = 170, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 42, .pad = 170, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 42, .pad = 166, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 40, .pad = 166, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 40, .pad = 161, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 39, .pad = 161, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 39, .pad = 156, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 38, .pad = 156, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 38, .pad = 152, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 37, .pad = 152, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 37, .pad = 148, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 36, .pad = 148, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 36, .pad = 143, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 35, .pad = 143, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 35, .pad = 139, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 34, .pad = 139, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 34, .pad = 135, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 33, .pad = 135, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 33, .pad = 132, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 32, .pad = 132, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 32, .pad = 128, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 31, .pad = 128, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 31, .pad = 124, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 30, .pad = 124, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 30, .pad = 121, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 29, .pad = 121, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 29, .pad = 117, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 29, .pad = 117, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 29, .pad = 114, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 28, .pad = 114, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 28, .pad = 111, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 27, .pad = 111, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 27, .pad = 108, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 26, .pad = 108, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 26, .pad = 104, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 25, .pad = 104, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 25, .pad = 102, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 25, .pad = 102, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 25, .pad = 99, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 24, .pad = 99, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 24, .pad = 96, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 23, .pad = 96, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 23, .pad = 93, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 23, .pad = 93, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 23, .pad = 90, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 22, .pad = 90, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 22, .pad = 88, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 21, .pad = 88, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 21, .pad = 85, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 21, .pad = 85, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 21, .pad = 83, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 20, .pad = 83, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 20, .pad = 81, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 20, .pad = 81, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 20, .pad = 78, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 19, .pad = 78, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 19, .pad = 76, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 19, .pad = 76, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 19, .pad = 74, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 18, .pad = 74, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 18, .pad = 72, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 18, .pad = 72, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 18, .pad = 70, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 17, .pad = 70, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 17, .pad = 68, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 17, .pad = 68, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 17, .pad = 66, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 16, .pad = 66, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 16, .pad = 64, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 16, .pad = 64, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 16, .pad = 62, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 62, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 60, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 60, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 15, .pad = 59, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 59, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 57, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 57, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 55, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 55, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 14, .pad = 54, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 54, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 52, .dac = 0, .bb_mult = 64, },
+ { .gm = 7, .pga = 13, .pad = 52, .dac = 0, .bb_mult = 64, },
+};
+
+static struct lpphy_tx_gain_table_entry lpphy_rev2_5ghz_tx_gain_table[] = {
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 152, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 147, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 143, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 139, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 135, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 131, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 128, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 124, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 121, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 117, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 114, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 111, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 107, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 104, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 101, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 99, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 96, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 93, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 90, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 88, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 85, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 83, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 81, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 78, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 76, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 74, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 72, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 70, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 68, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 66, },
+ { .gm = 255, .pga = 255, .pad = 255, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 248, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 241, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 234, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 227, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 221, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 215, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 208, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 203, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 197, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 191, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 186, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 181, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 175, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 170, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 166, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 161, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 156, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 152, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 148, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 143, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 139, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 135, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 132, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 128, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 124, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 121, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 117, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 114, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 111, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 108, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 104, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 102, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 99, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 96, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 93, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 90, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 88, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 85, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 83, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 81, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 78, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 76, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 74, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 72, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 70, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 68, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 66, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 64, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 64, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 255, .pad = 62, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 248, .pad = 62, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 248, .pad = 60, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 241, .pad = 60, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 241, .pad = 59, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 234, .pad = 59, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 234, .pad = 57, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 227, .pad = 57, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 227, .pad = 55, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 221, .pad = 55, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 221, .pad = 54, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 215, .pad = 54, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 215, .pad = 52, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 208, .pad = 52, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 208, .pad = 51, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 203, .pad = 51, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 203, .pad = 49, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 197, .pad = 49, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 197, .pad = 48, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 191, .pad = 48, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 191, .pad = 47, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 186, .pad = 47, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 186, .pad = 45, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 181, .pad = 45, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 181, .pad = 44, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 175, .pad = 44, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 175, .pad = 43, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 170, .pad = 43, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 170, .pad = 42, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 166, .pad = 42, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 166, .pad = 40, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 161, .pad = 40, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 161, .pad = 39, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 156, .pad = 39, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 156, .pad = 38, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 152, .pad = 38, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 152, .pad = 37, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 148, .pad = 37, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 148, .pad = 36, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 143, .pad = 36, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 143, .pad = 35, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 139, .pad = 35, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 139, .pad = 34, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 135, .pad = 34, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 135, .pad = 33, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 132, .pad = 33, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 132, .pad = 32, .dac = 0, .bb_mult = 64, },
+ { .gm = 255, .pga = 128, .pad = 32, .dac = 0, .bb_mult = 64, },
+};
+
+void lpphy_rev0_1_table_init(struct b43_wldev *dev)
+{
+ B43_WARN_ON(dev->phy.rev >= 2);
+
+ b43_lptab_write_bulk(dev, B43_LPTAB8(2, 0),
+ ARRAY_SIZE(lpphy_min_sig_sq_table), lpphy_min_sig_sq_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(1, 0),
+ ARRAY_SIZE(lpphy_rev01_noise_scale_table), lpphy_rev01_noise_scale_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(14, 0),
+ ARRAY_SIZE(lpphy_crs_gain_nft_table), lpphy_crs_gain_nft_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(8, 0),
+ ARRAY_SIZE(lpphy_rev01_filter_control_table), lpphy_rev01_filter_control_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(9, 0),
+ ARRAY_SIZE(lpphy_rev01_ps_control_table), lpphy_rev01_ps_control_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB8(6, 0),
+ ARRAY_SIZE(lpphy_pll_fraction_table), lpphy_pll_fraction_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(0, 0),
+ ARRAY_SIZE(lpphy_iqlo_cal_table), lpphy_iqlo_cal_table);
+ if (dev->phy.rev == 0) {
+ b43_lptab_write_bulk(dev, B43_LPTAB16(13, 0),
+ ARRAY_SIZE(lpphy_rev0_ofdm_cck_gain_table), lpphy_rev0_ofdm_cck_gain_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(12, 0),
+ ARRAY_SIZE(lpphy_rev0_ofdm_cck_gain_table), lpphy_rev0_ofdm_cck_gain_table);
+ } else {
+ b43_lptab_write_bulk(dev, B43_LPTAB16(13, 0),
+ ARRAY_SIZE(lpphy_rev1_ofdm_cck_gain_table), lpphy_rev1_ofdm_cck_gain_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(12, 0),
+ ARRAY_SIZE(lpphy_rev1_ofdm_cck_gain_table), lpphy_rev1_ofdm_cck_gain_table);
+}
+ b43_lptab_write_bulk(dev, B43_LPTAB16(15, 0),
+ ARRAY_SIZE(lpphy_gain_delta_table), lpphy_gain_delta_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0),
+ ARRAY_SIZE(lpphy_tx_power_control_table), lpphy_tx_power_control_table);
+}
+
+void lpphy_rev2plus_table_init(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ int i;
+
+ B43_WARN_ON(dev->phy.rev < 2);
+
+ for (i = 0; i < 704; i++)
+ b43_lptab_write(dev, B43_LPTAB32(7, i), 0);
+
+ b43_lptab_write_bulk(dev, B43_LPTAB8(2, 0),
+ ARRAY_SIZE(lpphy_min_sig_sq_table), lpphy_min_sig_sq_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(1, 0),
+ ARRAY_SIZE(lpphy_rev2plus_noise_scale_table), lpphy_rev2plus_noise_scale_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(11, 0),
+ ARRAY_SIZE(lpphy_rev2plus_filter_control_table), lpphy_rev2plus_filter_control_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(12, 0),
+ ARRAY_SIZE(lpphy_rev2plus_ps_control_table), lpphy_rev2plus_ps_control_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(13, 0),
+ ARRAY_SIZE(lpphy_gain_idx_table), lpphy_gain_idx_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(14, 0),
+ ARRAY_SIZE(lpphy_aux_gain_idx_table), lpphy_aux_gain_idx_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(15, 0),
+ ARRAY_SIZE(lpphy_sw_control_table), lpphy_sw_control_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB8(16, 0),
+ ARRAY_SIZE(lpphy_hf_table), lpphy_hf_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(17, 0),
+ ARRAY_SIZE(lpphy_gain_value_table), lpphy_gain_value_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(18, 0),
+ ARRAY_SIZE(lpphy_gain_table), lpphy_gain_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB8(6, 0),
+ ARRAY_SIZE(lpphy_pll_fraction_table), lpphy_pll_fraction_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(0, 0),
+ ARRAY_SIZE(lpphy_iqlo_cal_table), lpphy_iqlo_cal_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(9, 0),
+ ARRAY_SIZE(lpphy_papd_eps_table), lpphy_papd_eps_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0),
+ ARRAY_SIZE(lpphy_papd_mult_table), lpphy_papd_mult_table);
+
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
+ b43_lptab_write_bulk(dev, B43_LPTAB32(13, 0),
+ ARRAY_SIZE(lpphy_a0_gain_idx_table), lpphy_a0_gain_idx_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(14, 0),
+ ARRAY_SIZE(lpphy_a0_aux_gain_idx_table), lpphy_a0_aux_gain_idx_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB32(17, 0),
+ ARRAY_SIZE(lpphy_a0_gain_value_table), lpphy_a0_gain_value_table);
+ b43_lptab_write_bulk(dev, B43_LPTAB16(18, 0),
+ ARRAY_SIZE(lpphy_a0_gain_table), lpphy_a0_gain_table);
+ }
+}
+
+static void lpphy_rev0_1_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data)
+{
+ u32 tmp;
+
+ B43_WARN_ON(dev->phy.rev >= 2);
+
+ tmp = data.pad << 11;
+ tmp |= data.pga << 7;
+ tmp |= data.gm << 4;
+ tmp |= data.dac;
+ b43_lptab_write(dev, B43_LPTAB32(10, 0xC0 + offset), tmp);
+ tmp = data.bb_mult << 20;
+ b43_lptab_write(dev, B43_LPTAB32(10, 0x140 + offset), tmp);
+}
+
+static void lpphy_rev2plus_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data)
+{
+ u32 tmp;
+
+ B43_WARN_ON(dev->phy.rev < 2);
+
+ tmp = data.pad << 16;
+ tmp |= data.pga << 8;
+ tmp |= data.gm;
+ if (dev->phy.rev >= 3) {
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+ tmp |= 0x10 << 24;
+ else
+ tmp |= 0x70 << 24;
+ } else {
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+ tmp |= 0x14 << 24;
+ else
+ tmp |= 0x7F << 24;
+ }
+ b43_lptab_write(dev, B43_LPTAB32(7, 0xC0 + offset), tmp);
+ tmp = data.bb_mult << 20;
+ tmp |= data.dac << 28;
+ b43_lptab_write(dev, B43_LPTAB32(7, 0x140 + offset), tmp);
+}
+
+void lpphy_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data)
+{
+ if (dev->phy.rev >= 2)
+ lpphy_rev2plus_write_gain_table(dev, offset, data);
+ else
+ lpphy_rev0_1_write_gain_table(dev, offset, data);
+}
+
+void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count,
+ struct lpphy_tx_gain_table_entry *table)
+{
+ int i;
+
+ for (i = offset; i < count; i++)
+ lpphy_write_gain_table(dev, i, table[i]);
+}
+
+void lpphy_init_tx_gain_table(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+
+ switch (dev->phy.rev) {
+ case 0:
+ if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
+ (bus->sprom.boardflags_lo & B43_BFL_HGPA))
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev0_nopa_tx_gain_table);
+ else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev0_2ghz_tx_gain_table);
+ else
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev0_5ghz_tx_gain_table);
+ break;
+ case 1:
+ if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
+ (bus->sprom.boardflags_lo & B43_BFL_HGPA))
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev1_nopa_tx_gain_table);
+ else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev1_2ghz_tx_gain_table);
+ else
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev1_5ghz_tx_gain_table);
+ break;
+ default:
+ if (bus->sprom.boardflags_hi & B43_BFH_NOPA)
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev2_nopa_tx_gain_table);
+ else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev2_2ghz_tx_gain_table);
+ else
+ lpphy_write_gain_table_bulk(dev, 0, 128,
+ lpphy_rev2_5ghz_tx_gain_table);
}
}
diff --git a/drivers/net/wireless/b43/tables_lpphy.h b/drivers/net/wireless/b43/tables_lpphy.h
index 0b8d028..84f1d26 100644
--- a/drivers/net/wireless/b43/tables_lpphy.h
+++ b/drivers/net/wireless/b43/tables_lpphy.h
@@ -26,6 +26,19 @@
unsigned int nr_elements, const void *data);
void b2062_upload_init_table(struct b43_wldev *dev);
+void b2063_upload_init_table(struct b43_wldev *dev);
+struct lpphy_tx_gain_table_entry {
+ u8 gm, pga, pad, dac, bb_mult;
+};
+
+void lpphy_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data);
+void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count,
+ struct lpphy_tx_gain_table_entry *table);
+
+void lpphy_rev0_1_table_init(struct b43_wldev *dev);
+void lpphy_rev2plus_table_init(struct b43_wldev *dev);
+void lpphy_init_tx_gain_table(struct b43_wldev *dev);
#endif /* B43_TABLES_LPPHY_H_ */
diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c
index e1e20f6..97c7916 100644
--- a/drivers/net/wireless/b43/wa.c
+++ b/drivers/net/wireless/b43/wa.c
@@ -37,7 +37,7 @@
backup = b43_ofdmtab_read16(dev, B43_OFDMTAB_PWRDYN2, 0);
b43_ofdmtab_write16(dev, B43_OFDMTAB_PWRDYN2, 0, 7);
b43_ofdmtab_write16(dev, B43_OFDMTAB_UNKNOWN_APHY, 0, 0);
- b43_dummy_transmission(dev);
+ b43_dummy_transmission(dev, true, true);
b43_ofdmtab_write16(dev, B43_OFDMTAB_PWRDYN2, 0, backup);
}
@@ -628,7 +628,7 @@
B43_WARN_ON(1);
}
b43_wa_boards_g(dev);
- } else { /* No N PHY support so far */
+ } else { /* No N PHY support so far, LP PHY is in phy_lp.c */
B43_WARN_ON(1);
}
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 55f36a7..14f5412 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -180,11 +180,12 @@
/* Generate a TX data header. */
int b43_generate_txhdr(struct b43_wldev *dev,
u8 *_txhdr,
- const unsigned char *fragment_data,
- unsigned int fragment_len,
+ struct sk_buff *skb_frag,
struct ieee80211_tx_info *info,
u16 cookie)
{
+ const unsigned char *fragment_data = skb_frag->data;
+ unsigned int fragment_len = skb_frag->len;
struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr;
const struct b43_phy *phy = &dev->phy;
const struct ieee80211_hdr *wlhdr =
@@ -237,7 +238,7 @@
int wlhdr_len;
size_t iv_len;
- B43_WARN_ON(key_idx >= dev->max_nr_keys);
+ B43_WARN_ON(key_idx >= ARRAY_SIZE(dev->key));
key = &(dev->key[key_idx]);
if (unlikely(!key->keyconf)) {
@@ -258,9 +259,26 @@
mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) &
B43_TXH_MAC_KEYALG;
wlhdr_len = ieee80211_hdrlen(fctl);
- iv_len = min((size_t) info->control.hw_key->iv_len,
- ARRAY_SIZE(txhdr->iv));
- memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
+ if (key->algorithm == B43_SEC_ALGO_TKIP) {
+ u16 phase1key[5];
+ int i;
+ /* we give the phase1key and iv16 here, the key is stored in
+ * shm. With that the hardware can do phase 2 and encryption.
+ */
+ ieee80211_get_tkip_key(info->control.hw_key, skb_frag,
+ IEEE80211_TKIP_P1_KEY, (u8*)phase1key);
+ /* phase1key is in host endian. Copy to little-endian txhdr->iv. */
+ for (i = 0; i < 5; i++) {
+ txhdr->iv[i * 2 + 0] = phase1key[i];
+ txhdr->iv[i * 2 + 1] = phase1key[i] >> 8;
+ }
+ /* iv16 */
+ memcpy(txhdr->iv + 10, ((u8 *) wlhdr) + wlhdr_len, 3);
+ } else {
+ iv_len = min((size_t) info->control.hw_key->iv_len,
+ ARRAY_SIZE(txhdr->iv));
+ memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len);
+ }
}
if (b43_is_old_txhdr_format(dev)) {
b43_generate_plcp_hdr((struct b43_plcp_hdr4 *)(&txhdr->old_format.plcp),
@@ -578,7 +596,7 @@
* key index, but the ucode passed it slightly different.
*/
keyidx = b43_kidx_to_raw(dev, keyidx);
- B43_WARN_ON(keyidx >= dev->max_nr_keys);
+ B43_WARN_ON(keyidx >= ARRAY_SIZE(dev->key));
if (dev->key[keyidx].algorithm != B43_SEC_ALGO_NONE) {
wlhdr_len = ieee80211_hdrlen(fctl);
@@ -655,6 +673,7 @@
status.freq = chanid + 2400;
break;
case B43_PHYTYPE_N:
+ case B43_PHYTYPE_LP:
/* chanid is the SHM channel cookie. Which is the plain
* channel number in b43. */
if (chanstat & B43_RX_CHAN_5GHZ) {
@@ -670,7 +689,8 @@
goto drop;
}
- ieee80211_rx_irqsafe(dev->wl->hw, skb, &status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx_irqsafe(dev->wl->hw, skb);
return;
drop:
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 4fb2a19..3530de8 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -176,8 +176,7 @@
int b43_generate_txhdr(struct b43_wldev *dev,
u8 * txhdr,
- const unsigned char *fragment_data,
- unsigned int fragment_len,
+ struct sk_buff *skb_frag,
struct ieee80211_tx_info *txctl, u16 cookie);
/* Transmit Status */
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 2f90fb9..8664034 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -1366,15 +1366,25 @@
ring = priority_to_txring(dev, skb_get_queue_mapping(skb));
spin_lock_irqsave(&ring->lock, flags);
B43legacy_WARN_ON(!ring->tx);
- if (unlikely(free_slots(ring) < SLOTS_PER_PACKET)) {
- b43legacywarn(dev->wl, "DMA queue overflow\n");
+
+ if (unlikely(ring->stopped)) {
+ /* We get here only because of a bug in mac80211.
+ * Because of a race, one packet may be queued after
+ * the queue is stopped, thus we got called when we shouldn't.
+ * For now, just refuse the transmit. */
+ if (b43legacy_debug(dev, B43legacy_DBG_DMAVERBOSE))
+ b43legacyerr(dev->wl, "Packet after queue stopped\n");
err = -ENOSPC;
goto out_unlock;
}
- /* Check if the queue was stopped in mac80211,
- * but we got called nevertheless.
- * That would be a mac80211 bug. */
- B43legacy_BUG_ON(ring->stopped);
+
+ if (unlikely(WARN_ON(free_slots(ring) < SLOTS_PER_PACKET))) {
+ /* If we get here, we have a real error with the queue
+ * full, but queues not stopped. */
+ b43legacyerr(dev->wl, "DMA queue overflow\n");
+ err = -ENOSPC;
+ goto out_unlock;
+ }
err = dma_tx_fragment(ring, skb);
if (unlikely(err == -ENOKEY)) {
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c4973c1..1d9223b 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1252,7 +1252,7 @@
wl->current_beacon = beacon;
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
- queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
+ ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
}
static void b43legacy_set_beacon_int(struct b43legacy_wldev *dev,
@@ -2300,7 +2300,7 @@
delay = msecs_to_jiffies(50);
else
delay = round_jiffies_relative(HZ * 15);
- queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
+ ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay);
out:
mutex_unlock(&wl->mutex);
}
@@ -2311,7 +2311,7 @@
dev->periodic_state = 0;
INIT_DELAYED_WORK(work, b43legacy_periodic_work_handler);
- queue_delayed_work(dev->wl->hw->workqueue, work, 0);
+ ieee80211_queue_delayed_work(dev->wl->hw, work, 0);
}
/* Validate access to the chip (SHM) */
@@ -2836,9 +2836,7 @@
static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed,
- unsigned int *fflags,
- int mc_count,
- struct dev_addr_list *mc_list)
+ unsigned int *fflags,u64 multicast)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
@@ -3108,16 +3106,20 @@
bus->pcicore.dev->id.revision <= 5) {
/* IMCFGLO timeouts workaround. */
tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
switch (bus->bustype) {
case SSB_BUSTYPE_PCI:
case SSB_BUSTYPE_PCMCIA:
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp &= ~SSB_IMCFGLO_SERTO;
tmp |= 0x32;
break;
case SSB_BUSTYPE_SSB:
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp &= ~SSB_IMCFGLO_SERTO;
tmp |= 0x53;
break;
+ default:
+ break;
}
ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
}
@@ -3885,7 +3887,7 @@
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
return;
b43legacyinfo(dev->wl, "Controller RESET (%s) ...\n", reason);
- queue_work(dev->wl->hw->workqueue, &dev->restart_work);
+ ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
#ifdef CONFIG_PM
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index b8e39dd..103f3c9 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -590,8 +590,8 @@
chanstat);
}
- dev->stats.last_rx = jiffies;
- ieee80211_rx_irqsafe(dev->wl->hw, skb, &status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx_irqsafe(dev->wl->hw, skb);
return;
drop:
diff --git a/drivers/net/wireless/hostap/hostap_80211.h b/drivers/net/wireless/hostap/hostap_80211.h
index 2e9fb0f..7f9d8d9 100644
--- a/drivers/net/wireless/hostap/hostap_80211.h
+++ b/drivers/net/wireless/hostap/hostap_80211.h
@@ -3,6 +3,7 @@
#include <linux/types.h>
#include <linux/skbuff.h>
+#include <linux/netdevice.h>
struct hostap_ieee80211_mgmt {
__le16 frame_control;
@@ -85,8 +86,11 @@
struct hostap_80211_rx_status *rx_stats);
void hostap_dump_tx_80211(const char *name, struct sk_buff *skb);
-int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev);
-int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev);
-int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
#endif /* HOSTAP_80211_H */
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index d313b00..90108b6 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -53,7 +53,8 @@
/* hard_start_xmit function for data interfaces (wlan#, wlan#wds#, wlan#sta)
* Convert Ethernet header into a suitable IEEE 802.11 header depending on
* device configuration. */
-int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct hostap_interface *iface;
local_info_t *local;
@@ -75,7 +76,7 @@
printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (local->ddev != dev) {
@@ -89,14 +90,14 @@
printk(KERN_DEBUG "%s: prism2_tx: trying to use "
"AP device with Ethernet net dev\n", dev->name);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
} else {
if (local->iw_mode == IW_MODE_REPEAT) {
printk(KERN_DEBUG "%s: prism2_tx: trying to use "
"non-WDS link in Repeater mode\n", dev->name);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} else if (local->iw_mode == IW_MODE_INFRA &&
(local->wds_type & HOSTAP_WDS_AP_CLIENT) &&
memcmp(skb->data + ETH_ALEN, dev->dev_addr,
@@ -210,13 +211,13 @@
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL) {
iface->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
if (pskb_expand_head(skb, need_headroom, need_tailroom,
GFP_ATOMIC)) {
kfree_skb(skb);
iface->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
} else if (skb_headroom(skb) < need_headroom) {
struct sk_buff *tmp = skb;
@@ -224,13 +225,13 @@
kfree_skb(tmp);
if (skb == NULL) {
iface->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
} else {
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL) {
iface->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
}
@@ -256,12 +257,13 @@
/* Send IEEE 802.11 encapsulated frame using the master radio device */
skb->dev = local->dev;
dev_queue_xmit(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* hard_start_xmit function for hostapd wlan#ap interfaces */
-int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct hostap_interface *iface;
local_info_t *local;
@@ -276,7 +278,7 @@
printk(KERN_DEBUG "%s: hostap_mgmt_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
iface->stats.tx_packets++;
@@ -301,7 +303,7 @@
/* Send IEEE 802.11 encapsulated frame using the master radio device */
skb->dev = local->dev;
dev_queue_xmit(skb);
- return 0;
+ return NETDEV_TX_OK;
}
@@ -373,11 +375,12 @@
/* hard_start_xmit function for master radio interface wifi#.
* AP processing (TX rate control, power save buffering, etc.).
* Use hardware TX function to send the frame. */
-int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct hostap_interface *iface;
local_info_t *local;
- int ret = NETDEV_TX_BUSY;
+ netdev_tx_t ret = NETDEV_TX_BUSY;
u16 fc;
struct hostap_tx_data tx;
ap_tx_ret tx_ret;
@@ -396,7 +399,7 @@
printk(KERN_DEBUG "%s: invalid skb->cb magic (0x%08x, "
"expected 0x%08x)\n",
dev->name, meta->magic, HOSTAP_SKB_TX_DATA_MAGIC);
- ret = 0;
+ ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
goto fail;
}
@@ -414,7 +417,7 @@
if (skb->len < 24) {
printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
- ret = 0;
+ ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
goto fail;
}
@@ -441,13 +444,13 @@
dev->name, meta->ethertype);
hostap_dump_tx_80211(dev->name, skb);
- ret = 0; /* drop packet */
+ ret = NETDEV_TX_OK; /* drop packet */
iface->stats.tx_dropped++;
goto fail;
}
break;
case AP_TX_DROP:
- ret = 0; /* drop packet */
+ ret = NETDEV_TX_OK; /* drop packet */
iface->stats.tx_dropped++;
goto fail;
case AP_TX_RETRY:
@@ -455,7 +458,7 @@
case AP_TX_BUFFERED:
/* do not free skb here, it will be freed when the
* buffered frame is sent/timed out */
- ret = 0;
+ ret = NETDEV_TX_OK;
goto tx_exit;
}
@@ -501,7 +504,7 @@
"frame (drop_unencrypted=1)\n", dev->name);
}
iface->stats.tx_dropped++;
- ret = 0;
+ ret = NETDEV_TX_OK;
goto fail;
}
@@ -510,7 +513,7 @@
if (skb == NULL) {
printk(KERN_DEBUG "%s: TX - encryption failed\n",
dev->name);
- ret = 0;
+ ret = NETDEV_TX_OK;
goto fail;
}
meta = (struct hostap_skb_tx_data *) skb->cb;
@@ -519,23 +522,23 @@
"expected 0x%08x) after hostap_tx_encrypt\n",
dev->name, meta->magic,
HOSTAP_SKB_TX_DATA_MAGIC);
- ret = 0;
+ ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
goto fail;
}
}
if (local->func->tx == NULL || local->func->tx(skb, dev)) {
- ret = 0;
+ ret = NETDEV_TX_OK;
iface->stats.tx_dropped++;
} else {
- ret = 0;
+ ret = NETDEV_TX_OK;
iface->stats.tx_packets++;
iface->stats.tx_bytes += skb->len;
}
fail:
- if (!ret && skb)
+ if (ret == NETDEV_TX_OK && skb)
dev_kfree_skb(skb);
tx_exit:
if (tx.sta_ptr)
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 6337402..ad8eab4 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -666,7 +666,8 @@
* irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING |
+ IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = prism2_interrupt;
link->irq.Instance = dev;
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index 85cc799..a813138 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -4,7 +4,7 @@
config IPW2100
tristate "Intel PRO/Wireless 2100 Network Connection"
- depends on PCI && WLAN_80211
+ depends on PCI && WLAN_80211 && CFG80211
select WIRELESS_EXT
select FW_LOADER
select LIB80211
@@ -63,7 +63,7 @@
config IPW2200
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on PCI && WLAN_80211
+ depends on PCI && WLAN_80211 && CFG80211
select WIRELESS_EXT
select FW_LOADER
select LIB80211
@@ -150,7 +150,7 @@
config LIBIPW
tristate
- depends on PCI && WLAN_80211
+ depends on PCI && WLAN_80211 && CFG80211
select WIRELESS_EXT
select CRYPTO
select CRYPTO_ARC4
diff --git a/drivers/net/wireless/ipw2x00/ieee80211.h b/drivers/net/wireless/ipw2x00/ieee80211.h
deleted file mode 100644
index 70755c1..0000000
--- a/drivers/net/wireless/ipw2x00/ieee80211.h
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <j@w1.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004-2005, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- *
- * API Version History
- * 1.0.x -- Initial version
- * 1.1.x -- Added radiotap, QoS, TIM, ieee80211_geo APIs,
- * various structure changes, and crypto API init method
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h> /* ARRAY_SIZE */
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-
-#include <net/lib80211.h>
-
-#define IEEE80211_VERSION "git-1.1.13"
-
-#define IEEE80211_DATA_LEN 2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- 6.2.1.1.2.
-
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_1ADDR_LEN 10
-#define IEEE80211_2ADDR_LEN 16
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN 4
-#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-#define MIN_FRAG_THRESHOLD 256U
-#define MAX_FRAG_THRESHOLD 2346U
-
-/* QOS control */
-#define IEEE80211_QCTL_TID 0x000F
-
-/* debug macros */
-
-#ifdef CONFIG_LIBIPW_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
- printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
- in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
-static inline bool ieee80211_ratelimit_debug(u32 level)
-{
- return (ieee80211_debug_level & level) && net_ratelimit();
-}
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-static inline bool ieee80211_ratelimit_debug(u32 level)
-{
- return false;
-}
-#endif /* CONFIG_LIBIPW_DEBUG */
-
-/*
- * To use the debug system:
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry. xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ieee80211/debug_level
- *
- * you simply need to add your entry to the ieee80211_debug_level array.
- *
- * If you do not see debug_level in /proc/net/ieee80211 then you do not have
- * CONFIG_LIBIPW_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO (1<<0)
-#define IEEE80211_DL_WX (1<<1)
-#define IEEE80211_DL_SCAN (1<<2)
-#define IEEE80211_DL_STATE (1<<3)
-#define IEEE80211_DL_MGMT (1<<4)
-#define IEEE80211_DL_FRAG (1<<5)
-#define IEEE80211_DL_DROP (1<<7)
-
-#define IEEE80211_DL_TX (1<<8)
-#define IEEE80211_DL_RX (1<<9)
-#define IEEE80211_DL_QOS (1<<31)
-
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
-#include <linux/netdevice.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY /* enable iwspy support */
-#endif
-#include <net/iw_handler.h> /* new driver API */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
- u8 dsap; /* always 0xAA */
- u8 ssap; /* always 0xAA */
- u8 ctrl; /* always 0x03 */
- u8 oui[P80211_OUI_LEN]; /* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-#define IEEE80211_CCK_MODULATION (1<<0)
-#define IEEE80211_OFDM_MODULATION (1<<1)
-
-#define IEEE80211_24GHZ_BAND (1<<0)
-#define IEEE80211_52GHZ_BAND (1<<1)
-
-#define IEEE80211_CCK_RATE_1MB 0x02
-#define IEEE80211_CCK_RATE_2MB 0x04
-#define IEEE80211_CCK_RATE_5MB 0x0B
-#define IEEE80211_CCK_RATE_11MB 0x16
-#define IEEE80211_OFDM_RATE_6MB 0x0C
-#define IEEE80211_OFDM_RATE_9MB 0x12
-#define IEEE80211_OFDM_RATE_12MB 0x18
-#define IEEE80211_OFDM_RATE_18MB 0x24
-#define IEEE80211_OFDM_RATE_24MB 0x30
-#define IEEE80211_OFDM_RATE_36MB 0x48
-#define IEEE80211_OFDM_RATE_48MB 0x60
-#define IEEE80211_OFDM_RATE_54MB 0x6C
-#define IEEE80211_BASIC_RATE_MASK 0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
-
-#define IEEE80211_CCK_RATES_MASK 0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
- IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
- IEEE80211_CCK_RATE_5MB_MASK | \
- IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
- IEEE80211_OFDM_RATE_12MB_MASK | \
- IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
- IEEE80211_OFDM_RATE_9MB_MASK | \
- IEEE80211_OFDM_RATE_18MB_MASK | \
- IEEE80211_OFDM_RATE_36MB_MASK | \
- IEEE80211_OFDM_RATE_48MB_MASK | \
- IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
- IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES 8
-#define IEEE80211_NUM_CCK_RATES 4
-#define IEEE80211_OFDM_SHIFT_MASK_A 4
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- * information for frames received.
- * For ieee80211_rx_mgt, you need to set at least the 'len' parameter.
- */
-struct ieee80211_rx_stats {
- u32 mac_time;
- s8 rssi;
- u8 signal;
- u8 noise;
- u16 rate; /* in 100 kbps */
- u8 received_channel;
- u8 control;
- u8 mask;
- u8 freq;
- u16 len;
- u64 tsf;
- u32 beacon_time;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
- unsigned long first_frag_time;
- unsigned int seq;
- unsigned int last_frag;
- struct sk_buff *skb;
- u8 src_addr[ETH_ALEN];
- u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
- unsigned int tx_unicast_frames;
- unsigned int tx_multicast_frames;
- unsigned int tx_fragments;
- unsigned int tx_unicast_octets;
- unsigned int tx_multicast_octets;
- unsigned int tx_deferred_transmissions;
- unsigned int tx_single_retry_frames;
- unsigned int tx_multiple_retry_frames;
- unsigned int tx_retry_limit_exceeded;
- unsigned int tx_discards;
- unsigned int rx_unicast_frames;
- unsigned int rx_multicast_frames;
- unsigned int rx_fragments;
- unsigned int rx_unicast_octets;
- unsigned int rx_multicast_octets;
- unsigned int rx_fcs_errors;
- unsigned int rx_discards_no_buffer;
- unsigned int tx_discards_wrong_sa;
- unsigned int rx_discards_undecryptable;
- unsigned int rx_message_in_msg_fragments;
- unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#define SEC_KEY_1 (1<<0)
-#define SEC_KEY_2 (1<<1)
-#define SEC_KEY_3 (1<<2)
-#define SEC_KEY_4 (1<<3)
-#define SEC_ACTIVE_KEY (1<<4)
-#define SEC_AUTH_MODE (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL (1<<7)
-#define SEC_ENABLED (1<<8)
-#define SEC_ENCRYPT (1<<9)
-
-#define SEC_LEVEL_0 0 /* None */
-#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
-
-#define SEC_ALG_NONE 0
-#define SEC_ALG_WEP 1
-#define SEC_ALG_TKIP 2
-#define SEC_ALG_CCMP 3
-
-#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-#define SCM_KEY_LEN 32
-#define SCM_TEMPORAL_KEY_LENGTH 16
-
-struct ieee80211_security {
- u16 active_key:2, enabled:1, unicast_uses_group:1, encrypt:1;
- u8 auth_mode;
- u8 encode_alg[WEP_KEYS];
- u8 key_sizes[WEP_KEYS];
- u8 keys[WEP_KEYS][SCM_KEY_LEN];
- u8 level;
- u16 flags;
-} __attribute__ ((packed));
-
-/*
-
- 802.11 data frame from AP
-
- ,-------------------------------------------------------------------.
-Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
- |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
- | | tion | (BSSID) | | | ence | data | |
- `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
-
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-struct ieee80211_hdr_1addr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_2addr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
- u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addrqos {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 payload[0];
- __le16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element {
- u8 id;
- u8 len;
- u8 data[0];
-} __attribute__ ((packed));
-
-/*
- * These are the data types that can make up management packets
- *
- u16 auth_algorithm;
- u16 auth_sequence;
- u16 beacon_interval;
- u16 capability;
- u8 current_ap[ETH_ALEN];
- u16 listen_interval;
- struct {
- u16 association_id:14, reserved:2;
- } __attribute__ ((packed));
- u32 time_stamp[2];
- u16 reason;
- u16 status;
-*/
-
-struct ieee80211_auth {
- struct ieee80211_hdr_3addr header;
- __le16 algorithm;
- __le16 transaction;
- __le16 status;
- /* challenge */
- struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_channel_switch {
- u8 id;
- u8 len;
- u8 mode;
- u8 channel;
- u8 count;
-} __attribute__ ((packed));
-
-struct ieee80211_action {
- struct ieee80211_hdr_3addr header;
- u8 category;
- u8 action;
- union {
- struct ieee80211_action_exchange {
- u8 token;
- struct ieee80211_info_element info_element[0];
- } exchange;
- struct ieee80211_channel_switch channel_switch;
-
- } format;
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc {
- struct ieee80211_hdr_3addr header;
- __le16 reason;
-} __attribute__ ((packed));
-
-/* Alias deauth for disassoc */
-#define ieee80211_deauth ieee80211_disassoc
-
-struct ieee80211_probe_request {
- struct ieee80211_hdr_3addr header;
- /* SSID, supported rates */
- struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
- struct ieee80211_hdr_3addr header;
- __le32 time_stamp[2];
- __le16 beacon_interval;
- __le16 capability;
- /* SSID, supported rates, FH params, DS params,
- * CF params, IBSS params, TIM (if beacon), RSN */
- struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-/* Alias beacon for probe_response */
-#define ieee80211_beacon ieee80211_probe_response
-
-struct ieee80211_assoc_request {
- struct ieee80211_hdr_3addr header;
- __le16 capability;
- __le16 listen_interval;
- /* SSID, supported rates, RSN */
- struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_reassoc_request {
- struct ieee80211_hdr_3addr header;
- __le16 capability;
- __le16 listen_interval;
- u8 current_ap[ETH_ALEN];
- struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_response {
- struct ieee80211_hdr_3addr header;
- __le16 capability;
- __le16 status;
- __le16 aid;
- /* supported rates */
- struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_txb {
- u8 nr_frags;
- u8 encrypted;
- u8 rts_included;
- u8 reserved;
- u16 frag_size;
- u16 payload_size;
- struct sk_buff *fragments[0];
-};
-
-/* SWEEP TABLE ENTRIES NUMBER */
-#define MAX_SWEEP_TAB_ENTRIES 42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
-/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
- * only use 8, and then use extended rates for the remaining supported
- * rates. Other APs, however, stick all of their supported rates on the
- * main rates information element... */
-#define MAX_RATES_LENGTH ((u8)12)
-#define MAX_RATES_EX_LENGTH ((u8)16)
-#define MAX_NETWORK_COUNT 128
-
-#define CRC_LENGTH 4U
-
-#define MAX_WPA_IE_LEN 64
-
-#define NETWORK_HAS_OFDM (1<<1)
-#define NETWORK_HAS_CCK (1<<2)
-
-/* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION (1<<4)
-#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
- NETWORK_HAS_QOS_INFORMATION)
-
-/* 802.11h */
-#define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
-#define NETWORK_HAS_CSA (1<<6)
-#define NETWORK_HAS_QUIET (1<<7)
-#define NETWORK_HAS_IBSS_DFS (1<<8)
-#define NETWORK_HAS_TPC_REPORT (1<<9)
-
-#define NETWORK_HAS_ERP_VALUE (1<<10)
-
-#define QOS_QUEUE_NUM 4
-#define QOS_OUI_LEN 3
-#define QOS_OUI_TYPE 2
-#define QOS_ELEMENT_ID 221
-#define QOS_OUI_INFO_SUB_TYPE 0
-#define QOS_OUI_PARAM_SUB_TYPE 1
-#define QOS_VERSION_1 1
-#define QOS_AIFSN_MIN_VALUE 2
-
-struct ieee80211_qos_information_element {
- u8 elementID;
- u8 length;
- u8 qui[QOS_OUI_LEN];
- u8 qui_type;
- u8 qui_subtype;
- u8 version;
- u8 ac_info;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_ac_parameter {
- u8 aci_aifsn;
- u8 ecw_min_max;
- __le16 tx_op_limit;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameter_info {
- struct ieee80211_qos_information_element info_element;
- u8 reserved;
- struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameters {
- __le16 cw_min[QOS_QUEUE_NUM];
- __le16 cw_max[QOS_QUEUE_NUM];
- u8 aifs[QOS_QUEUE_NUM];
- u8 flag[QOS_QUEUE_NUM];
- __le16 tx_op_limit[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_data {
- struct ieee80211_qos_parameters parameters;
- int active;
- int supported;
- u8 param_count;
- u8 old_param_count;
-};
-
-struct ieee80211_tim_parameters {
- u8 tim_count;
- u8 tim_period;
-} __attribute__ ((packed));
-
-/*******************************************************/
-
-enum { /* ieee80211_basic_report.map */
- IEEE80211_BASIC_MAP_BSS = (1 << 0),
- IEEE80211_BASIC_MAP_OFDM = (1 << 1),
- IEEE80211_BASIC_MAP_UNIDENTIFIED = (1 << 2),
- IEEE80211_BASIC_MAP_RADAR = (1 << 3),
- IEEE80211_BASIC_MAP_UNMEASURED = (1 << 4),
- /* Bits 5-7 are reserved */
-
-};
-struct ieee80211_basic_report {
- u8 channel;
- __le64 start_time;
- __le16 duration;
- u8 map;
-} __attribute__ ((packed));
-
-enum { /* ieee80211_measurement_request.mode */
- /* Bit 0 is reserved */
- IEEE80211_MEASUREMENT_ENABLE = (1 << 1),
- IEEE80211_MEASUREMENT_REQUEST = (1 << 2),
- IEEE80211_MEASUREMENT_REPORT = (1 << 3),
- /* Bits 4-7 are reserved */
-};
-
-enum {
- IEEE80211_REPORT_BASIC = 0, /* required */
- IEEE80211_REPORT_CCA = 1, /* optional */
- IEEE80211_REPORT_RPI = 2, /* optional */
- /* 3-255 reserved */
-};
-
-struct ieee80211_measurement_params {
- u8 channel;
- __le64 start_time;
- __le16 duration;
-} __attribute__ ((packed));
-
-struct ieee80211_measurement_request {
- struct ieee80211_info_element ie;
- u8 token;
- u8 mode;
- u8 type;
- struct ieee80211_measurement_params params[0];
-} __attribute__ ((packed));
-
-struct ieee80211_measurement_report {
- struct ieee80211_info_element ie;
- u8 token;
- u8 mode;
- u8 type;
- union {
- struct ieee80211_basic_report basic[0];
- } u;
-} __attribute__ ((packed));
-
-struct ieee80211_tpc_report {
- u8 transmit_power;
- u8 link_margin;
-} __attribute__ ((packed));
-
-struct ieee80211_channel_map {
- u8 channel;
- u8 map;
-} __attribute__ ((packed));
-
-struct ieee80211_ibss_dfs {
- struct ieee80211_info_element ie;
- u8 owner[ETH_ALEN];
- u8 recovery_interval;
- struct ieee80211_channel_map channel_map[0];
-};
-
-struct ieee80211_csa {
- u8 mode;
- u8 channel;
- u8 count;
-} __attribute__ ((packed));
-
-struct ieee80211_quiet {
- u8 count;
- u8 period;
- u8 duration;
- u8 offset;
-} __attribute__ ((packed));
-
-struct ieee80211_network {
- /* These entries are used to identify a unique network */
- u8 bssid[ETH_ALEN];
- u8 channel;
- /* Ensure null-terminated for any debug msgs */
- u8 ssid[IW_ESSID_MAX_SIZE + 1];
- u8 ssid_len;
-
- struct ieee80211_qos_data qos_data;
-
- /* These are network statistics */
- struct ieee80211_rx_stats stats;
- u16 capability;
- u8 rates[MAX_RATES_LENGTH];
- u8 rates_len;
- u8 rates_ex[MAX_RATES_EX_LENGTH];
- u8 rates_ex_len;
- unsigned long last_scanned;
- u8 mode;
- u32 flags;
- u32 last_associate;
- u32 time_stamp[2];
- u16 beacon_interval;
- u16 listen_interval;
- u16 atim_window;
- u8 erp_value;
- u8 wpa_ie[MAX_WPA_IE_LEN];
- size_t wpa_ie_len;
- u8 rsn_ie[MAX_WPA_IE_LEN];
- size_t rsn_ie_len;
- struct ieee80211_tim_parameters tim;
-
- /* 802.11h info */
-
- /* Power Constraint - mandatory if spctrm mgmt required */
- u8 power_constraint;
-
- /* TPC Report - mandatory if spctrm mgmt required */
- struct ieee80211_tpc_report tpc_report;
-
- /* IBSS DFS - mandatory if spctrm mgmt required and IBSS
- * NOTE: This is variable length and so must be allocated dynamically */
- struct ieee80211_ibss_dfs *ibss_dfs;
-
- /* Channel Switch Announcement - optional if spctrm mgmt required */
- struct ieee80211_csa csa;
-
- /* Quiet - optional if spctrm mgmt required */
- struct ieee80211_quiet quiet;
-
- struct list_head list;
-};
-
-enum ieee80211_state {
- IEEE80211_UNINITIALIZED = 0,
- IEEE80211_INITIALIZED,
- IEEE80211_ASSOCIATING,
- IEEE80211_ASSOCIATED,
- IEEE80211_AUTHENTICATING,
- IEEE80211_AUTHENTICATED,
- IEEE80211_SHUTDOWN
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS (1<<0)
-#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-#define CFG_IEEE80211_RTS (1<<2)
-
-#define IEEE80211_24GHZ_MIN_CHANNEL 1
-#define IEEE80211_24GHZ_MAX_CHANNEL 14
-#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
- IEEE80211_24GHZ_MIN_CHANNEL + 1)
-
-#define IEEE80211_52GHZ_MIN_CHANNEL 34
-#define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
- IEEE80211_52GHZ_MIN_CHANNEL + 1)
-
-enum {
- IEEE80211_CH_PASSIVE_ONLY = (1 << 0),
- IEEE80211_CH_80211H_RULES = (1 << 1),
- IEEE80211_CH_B_ONLY = (1 << 2),
- IEEE80211_CH_NO_IBSS = (1 << 3),
- IEEE80211_CH_UNIFORM_SPREADING = (1 << 4),
- IEEE80211_CH_RADAR_DETECT = (1 << 5),
- IEEE80211_CH_INVALID = (1 << 6),
-};
-
-struct ieee80211_channel {
- u32 freq; /* in MHz */
- u8 channel;
- u8 flags;
- u8 max_power; /* in dBm */
-};
-
-struct ieee80211_geo {
- u8 name[4];
- u8 bg_channels;
- u8 a_channels;
- struct ieee80211_channel bg[IEEE80211_24GHZ_CHANNELS];
- struct ieee80211_channel a[IEEE80211_52GHZ_CHANNELS];
-};
-
-struct ieee80211_device {
- struct net_device *dev;
- struct ieee80211_security sec;
-
- /* Bookkeeping structures */
- struct ieee80211_stats ieee_stats;
-
- struct ieee80211_geo geo;
-
- /* Probe / Beacon management */
- struct list_head network_free_list;
- struct list_head network_list;
- struct ieee80211_network *networks;
- int scans;
- int scan_age;
-
- int iw_mode; /* operating mode (IW_MODE_*) */
- struct iw_spy_data spy_data; /* iwspy support */
-
- spinlock_t lock;
-
- int tx_headroom; /* Set to size of any additional room needed at front
- * of allocated Tx SKBs */
- u32 config;
-
- /* WEP and other encryption related settings at the device level */
- int open_wep; /* Set to 1 to allow unencrypted frames */
-
- int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
- * WEP key changes */
-
- /* If the host performs {en,de}cryption, then set to 1 */
- int host_encrypt;
- int host_encrypt_msdu;
- int host_decrypt;
- /* host performs multicast decryption */
- int host_mc_decrypt;
-
- /* host should strip IV and ICV from protected frames */
- /* meaningful only when hardware decryption is being used */
- int host_strip_iv_icv;
-
- int host_open_frag;
- int host_build_iv;
- int ieee802_1x; /* is IEEE 802.1X used */
-
- /* WPA data */
- int wpa_enabled;
- int drop_unencrypted;
- int privacy_invoked;
- size_t wpa_ie_len;
- u8 *wpa_ie;
-
- struct lib80211_crypt_info crypt_info;
-
- int bcrx_sta_key; /* use individual keys to override default keys even
- * with RX of broad/multicast frames */
-
- /* Fragmentation structures */
- struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
- unsigned int frag_next_idx;
- u16 fts; /* Fragmentation Threshold */
- u16 rts; /* RTS threshold */
-
- /* Association info */
- u8 bssid[ETH_ALEN];
-
- enum ieee80211_state state;
-
- int mode; /* A, B, G */
- int modulation; /* CCK, OFDM */
- int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
- int abg_true; /* ABG flag */
-
- int perfect_rssi;
- int worst_rssi;
-
- u16 prev_seq_ctl; /* used to drop duplicate frames */
-
- /* Callback functions */
- void (*set_security) (struct net_device * dev,
- struct ieee80211_security * sec);
- int (*hard_start_xmit) (struct ieee80211_txb * txb,
- struct net_device * dev, int pri);
- int (*reset_port) (struct net_device * dev);
- int (*is_queue_full) (struct net_device * dev, int pri);
-
- int (*handle_management) (struct net_device * dev,
- struct ieee80211_network * network, u16 type);
- int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
-
- /* Typical STA methods */
- int (*handle_auth) (struct net_device * dev,
- struct ieee80211_auth * auth);
- int (*handle_deauth) (struct net_device * dev,
- struct ieee80211_deauth * auth);
- int (*handle_action) (struct net_device * dev,
- struct ieee80211_action * action,
- struct ieee80211_rx_stats * stats);
- int (*handle_disassoc) (struct net_device * dev,
- struct ieee80211_disassoc * assoc);
- int (*handle_beacon) (struct net_device * dev,
- struct ieee80211_beacon * beacon,
- struct ieee80211_network * network);
- int (*handle_probe_response) (struct net_device * dev,
- struct ieee80211_probe_response * resp,
- struct ieee80211_network * network);
- int (*handle_probe_request) (struct net_device * dev,
- struct ieee80211_probe_request * req,
- struct ieee80211_rx_stats * stats);
- int (*handle_assoc_response) (struct net_device * dev,
- struct ieee80211_assoc_response * resp,
- struct ieee80211_network * network);
-
- /* Typical AP methods */
- int (*handle_assoc_request) (struct net_device * dev);
- int (*handle_reassoc_request) (struct net_device * dev,
- struct ieee80211_reassoc_request * req);
-
- /* This must be the last item so that it points to the data
- * allocated beyond this structure by alloc_ieee80211 */
- u8 priv[0];
-};
-
-#define IEEE_A (1<<0)
-#define IEEE_B (1<<1)
-#define IEEE_G (1<<2)
-#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
-
-static inline void *ieee80211_priv(struct net_device *dev)
-{
- return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-}
-
-static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee,
- int mode)
-{
- /*
- * It is possible for both access points and our device to support
- * combinations of modes, so as long as there is one valid combination
- * of ap/device supported modes, then return success
- *
- */
- if ((mode & IEEE_A) &&
- (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
- (ieee->freq_band & IEEE80211_52GHZ_BAND))
- return 1;
-
- if ((mode & IEEE_G) &&
- (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
- (ieee->freq_band & IEEE80211_24GHZ_BAND))
- return 1;
-
- if ((mode & IEEE_B) &&
- (ieee->modulation & IEEE80211_CCK_MODULATION) &&
- (ieee->freq_band & IEEE80211_24GHZ_BAND))
- return 1;
-
- return 0;
-}
-
-static inline int ieee80211_get_hdrlen(u16 fc)
-{
- int hdrlen = IEEE80211_3ADDR_LEN;
- u16 stype = WLAN_FC_GET_STYPE(fc);
-
- switch (WLAN_FC_GET_TYPE(fc)) {
- case IEEE80211_FTYPE_DATA:
- if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
- hdrlen = IEEE80211_4ADDR_LEN;
- if (stype & IEEE80211_STYPE_QOS_DATA)
- hdrlen += 2;
- break;
- case IEEE80211_FTYPE_CTL:
- switch (WLAN_FC_GET_STYPE(fc)) {
- case IEEE80211_STYPE_CTS:
- case IEEE80211_STYPE_ACK:
- hdrlen = IEEE80211_1ADDR_LEN;
- break;
- default:
- hdrlen = IEEE80211_2ADDR_LEN;
- break;
- }
- break;
- }
-
- return hdrlen;
-}
-
-static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
-{
- switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control))) {
- case IEEE80211_1ADDR_LEN:
- return ((struct ieee80211_hdr_1addr *)hdr)->payload;
- case IEEE80211_2ADDR_LEN:
- return ((struct ieee80211_hdr_2addr *)hdr)->payload;
- case IEEE80211_3ADDR_LEN:
- return ((struct ieee80211_hdr_3addr *)hdr)->payload;
- case IEEE80211_4ADDR_LEN:
- return ((struct ieee80211_hdr_4addr *)hdr)->payload;
- }
- return NULL;
-}
-
-static inline int ieee80211_is_ofdm_rate(u8 rate)
-{
- switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
- case IEEE80211_OFDM_RATE_6MB:
- case IEEE80211_OFDM_RATE_9MB:
- case IEEE80211_OFDM_RATE_12MB:
- case IEEE80211_OFDM_RATE_18MB:
- case IEEE80211_OFDM_RATE_24MB:
- case IEEE80211_OFDM_RATE_36MB:
- case IEEE80211_OFDM_RATE_48MB:
- case IEEE80211_OFDM_RATE_54MB:
- return 1;
- }
- return 0;
-}
-
-static inline int ieee80211_is_cck_rate(u8 rate)
-{
- switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
- case IEEE80211_CCK_RATE_1MB:
- case IEEE80211_CCK_RATE_2MB:
- case IEEE80211_CCK_RATE_5MB:
- case IEEE80211_CCK_RATE_11MB:
- return 1;
- }
- return 0;
-}
-
-/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev);
-extern struct net_device *alloc_ieee80211(int sizeof_priv);
-extern int ieee80211_change_mtu(struct net_device *dev, int new_mtu);
-
-extern void ieee80211_networks_age(struct ieee80211_device *ieee,
- unsigned long age_secs);
-
-extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
-
-/* ieee80211_tx.c */
-extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
-extern void ieee80211_txb_free(struct ieee80211_txb *);
-
-/* ieee80211_rx.c */
-extern void ieee80211_rx_any(struct ieee80211_device *ieee,
- struct sk_buff *skb, struct ieee80211_rx_stats *stats);
-extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
- struct ieee80211_rx_stats *rx_stats);
-/* make sure to set stats->len */
-extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
- struct ieee80211_hdr_4addr *header,
- struct ieee80211_rx_stats *stats);
-extern void ieee80211_network_reset(struct ieee80211_network *network);
-
-/* ieee80211_geo.c */
-extern const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device
- *ieee);
-extern int ieee80211_set_geo(struct ieee80211_device *ieee,
- const struct ieee80211_geo *geo);
-
-extern int ieee80211_is_valid_channel(struct ieee80211_device *ieee,
- u8 channel);
-extern int ieee80211_channel_to_index(struct ieee80211_device *ieee,
- u8 channel);
-extern u8 ieee80211_freq_to_channel(struct ieee80211_device *ieee, u32 freq);
-extern u8 ieee80211_get_channel_flags(struct ieee80211_device *ieee,
- u8 channel);
-extern const struct ieee80211_channel *ieee80211_get_channel(struct
- ieee80211_device
- *ieee, u8 channel);
-extern u32 ieee80211_channel_to_freq(struct ieee80211_device * ieee,
- u8 channel);
-
-/* ieee80211_wx.c */
-extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra);
-extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra);
-
-static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
-{
- ieee->scans++;
-}
-
-static inline int ieee80211_get_scans(struct ieee80211_device *ieee)
-{
- return ieee->scans;
-}
-
-#endif /* IEEE80211_H */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 7424323..240cff1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -19,7 +19,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
Portions of this file are based on the sample_* files provided by Wireless
@@ -185,7 +185,7 @@
MODULE_LICENSE("GPL");
static int debug = 0;
-static int mode = 0;
+static int network_mode = 0;
static int channel = 0;
static int associate = 0;
static int disable = 0;
@@ -195,7 +195,7 @@
#include <linux/moduleparam.h>
module_param(debug, int, 0444);
-module_param(mode, int, 0444);
+module_param_named(mode, network_mode, int, 0444);
module_param(channel, int, 0444);
module_param(associate, int, 0444);
module_param(disable, int, 0444);
@@ -1673,7 +1673,7 @@
return err;
}
-static const struct ieee80211_geo ipw_geos[] = {
+static const struct libipw_geo ipw_geos[] = {
{ /* Restricted */
"---",
.bg_channels = 14,
@@ -1694,7 +1694,7 @@
/* Age scan list entries found before suspend */
if (priv->suspend_time) {
- ieee80211_networks_age(priv->ieee, priv->suspend_time);
+ libipw_networks_age(priv->ieee, priv->suspend_time);
priv->suspend_time = 0;
}
@@ -1752,11 +1752,11 @@
}
/* Initialize the geo */
- if (ieee80211_set_geo(priv->ieee, &ipw_geos[0])) {
+ if (libipw_set_geo(priv->ieee, &ipw_geos[0])) {
printk(KERN_WARNING DRV_NAME "Could not set geo\n");
return 0;
}
- priv->ieee->freq_band = IEEE80211_24GHZ_BAND;
+ priv->ieee->freq_band = LIBIPW_24GHZ_BAND;
lock = LOCK_NONE;
if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
@@ -1817,7 +1817,7 @@
/* Called by register_netdev() */
static int ipw2100_net_init(struct net_device *dev)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
return ipw2100_up(priv, 1);
}
@@ -2340,8 +2340,8 @@
*
* When packet is provided by the firmware, it contains the following:
*
- * . ieee80211_hdr
- * . ieee80211_snap_hdr
+ * . libipw_hdr
+ * . libipw_snap_hdr
*
* The size of the constructed ethernet
*
@@ -2396,7 +2396,7 @@
}
static void isr_rx(struct ipw2100_priv *priv, int i,
- struct ieee80211_rx_stats *stats)
+ struct libipw_rx_stats *stats)
{
struct net_device *dev = priv->net_dev;
struct ipw2100_status *status = &priv->status_queue.drv[i];
@@ -2435,13 +2435,13 @@
#ifdef IPW2100_RX_DEBUG
/* Make a copy of the frame so we can dump it to the logs if
- * ieee80211_rx fails */
+ * libipw_rx fails */
skb_copy_from_linear_data(packet->skb, packet_data,
min_t(u32, status->frame_size,
IPW_RX_NIC_BUFFER_LENGTH));
#endif
- if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
+ if (!libipw_rx(priv->ieee, packet->skb, stats)) {
#ifdef IPW2100_RX_DEBUG
IPW_DEBUG_DROP("%s: Non consumed packet:\n",
dev->name);
@@ -2449,7 +2449,7 @@
#endif
dev->stats.rx_errors++;
- /* ieee80211_rx failed, so it didn't free the SKB */
+ /* libipw_rx failed, so it didn't free the SKB */
dev_kfree_skb_any(packet->skb);
packet->skb = NULL;
}
@@ -2470,7 +2470,7 @@
#ifdef CONFIG_IPW2100_MONITOR
static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
- struct ieee80211_rx_stats *stats)
+ struct libipw_rx_stats *stats)
{
struct net_device *dev = priv->net_dev;
struct ipw2100_status *status = &priv->status_queue.drv[i];
@@ -2528,10 +2528,10 @@
skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
- if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
+ if (!libipw_rx(priv->ieee, packet->skb, stats)) {
dev->stats.rx_errors++;
- /* ieee80211_rx failed, so it didn't free the SKB */
+ /* libipw_rx failed, so it didn't free the SKB */
dev_kfree_skb_any(packet->skb);
packet->skb = NULL;
}
@@ -2615,7 +2615,7 @@
u16 frame_type;
u32 r, w, i, s;
struct ipw2100_rx *u;
- struct ieee80211_rx_stats stats = {
+ struct libipw_rx_stats stats = {
.mac_time = jiffies,
};
@@ -2661,8 +2661,8 @@
stats.mask = 0;
if (stats.rssi != 0)
- stats.mask |= IEEE80211_STATMASK_RSSI;
- stats.freq = IEEE80211_24GHZ_BAND;
+ stats.mask |= LIBIPW_STATMASK_RSSI;
+ stats.freq = LIBIPW_24GHZ_BAND;
IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
priv->net_dev->name, frame_types[frame_type],
@@ -2686,11 +2686,11 @@
break;
}
#endif
- if (stats.len < sizeof(struct ieee80211_hdr_3addr))
+ if (stats.len < sizeof(struct libipw_hdr_3addr))
break;
switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
case IEEE80211_FTYPE_MGMT:
- ieee80211_rx_mgt(priv->ieee,
+ libipw_rx_mgt(priv->ieee,
&u->rx_data.header, &stats);
break;
@@ -2844,7 +2844,7 @@
#ifdef CONFIG_IPW2100_DEBUG
{
- int i = txq->oldest;
+ i = txq->oldest;
IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
&txq->drv[i],
(u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
@@ -2884,7 +2884,7 @@
tbd->buf_length, PCI_DMA_TODEVICE);
}
- ieee80211_txb_free(packet->info.d_struct.txb);
+ libipw_txb_free(packet->info.d_struct.txb);
packet->info.d_struct.txb = NULL;
list_add_tail(element, &priv->tx_free_list);
@@ -3028,7 +3028,7 @@
int next = txq->next;
int i = 0;
struct ipw2100_data_header *ipw_hdr;
- struct ieee80211_hdr_3addr *hdr;
+ struct libipw_hdr_3addr *hdr;
while (!list_empty(&priv->tx_pend_list)) {
/* if there isn't enough space in TBD queue, then
@@ -3062,7 +3062,7 @@
packet->index = txq->next;
ipw_hdr = packet->info.d_struct.data;
- hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb->
+ hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb->
fragments[0]->data;
if (priv->ieee->iw_mode == IW_MODE_INFRA) {
@@ -3086,7 +3086,7 @@
if (packet->info.d_struct.txb->nr_frags > 1)
ipw_hdr->fragment_size =
packet->info.d_struct.txb->frag_size -
- IEEE80211_3ADDR_LEN;
+ LIBIPW_3ADDR_LEN;
else
ipw_hdr->fragment_size = 0;
@@ -3119,13 +3119,13 @@
IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
tbd->buf_length = packet->info.d_struct.txb->
- fragments[i]->len - IEEE80211_3ADDR_LEN;
+ fragments[i]->len - LIBIPW_3ADDR_LEN;
tbd->host_addr = pci_map_single(priv->pci_dev,
packet->info.d_struct.
txb->fragments[i]->
data +
- IEEE80211_3ADDR_LEN,
+ LIBIPW_3ADDR_LEN,
tbd->buf_length,
PCI_DMA_TODEVICE);
@@ -3330,10 +3330,10 @@
return IRQ_NONE;
}
-static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev,
- int pri)
+static netdev_tx_t ipw2100_tx(struct libipw_txb *txb,
+ struct net_device *dev, int pri)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
struct list_head *element;
struct ipw2100_tx_packet *packet;
unsigned long flags;
@@ -3369,12 +3369,12 @@
ipw2100_tx_send_data(priv);
spin_unlock_irqrestore(&priv->low_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
- fail_unlock:
+fail_unlock:
netif_stop_queue(dev);
spin_unlock_irqrestore(&priv->low_lock, flags);
- return 1;
+ return NETDEV_TX_BUSY;
}
static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
@@ -4488,7 +4488,7 @@
/* We simply drop any SKBs that have been queued for
* transmit */
if (priv->tx_buffers[i].info.d_struct.txb) {
- ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
+ libipw_txb_free(priv->tx_buffers[i].info.d_struct.
txb);
priv->tx_buffers[i].info.d_struct.txb = NULL;
}
@@ -4527,7 +4527,7 @@
for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
if (priv->tx_buffers[i].info.d_struct.txb) {
- ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
+ libipw_txb_free(priv->tx_buffers[i].info.d_struct.
txb);
priv->tx_buffers[i].info.d_struct.txb = NULL;
}
@@ -5558,9 +5558,9 @@
}
static void shim__set_security(struct net_device *dev,
- struct ieee80211_security *sec)
+ struct libipw_security *sec)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int i, force_update = 0;
mutex_lock(&priv->action_mutex);
@@ -5753,7 +5753,7 @@
* method as well) to talk to the firmware */
static int ipw2100_set_address(struct net_device *dev, void *p)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
struct sockaddr *addr = p;
int err = 0;
@@ -5781,7 +5781,7 @@
static int ipw2100_open(struct net_device *dev)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
unsigned long flags;
IPW_DEBUG_INFO("dev->open\n");
@@ -5797,7 +5797,7 @@
static int ipw2100_close(struct net_device *dev)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
unsigned long flags;
struct list_head *element;
struct ipw2100_tx_packet *packet;
@@ -5818,7 +5818,7 @@
list_del(element);
DEC_STAT(&priv->tx_pend_stat);
- ieee80211_txb_free(packet->info.d_struct.txb);
+ libipw_txb_free(packet->info.d_struct.txb);
packet->info.d_struct.txb = NULL;
list_add_tail(element, &priv->tx_free_list);
@@ -5836,7 +5836,7 @@
*/
static void ipw2100_tx_timeout(struct net_device *dev)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
dev->stats.tx_errors++;
@@ -5861,8 +5861,8 @@
static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
{
- struct ieee80211_device *ieee = priv->ieee;
- struct ieee80211_security sec = {
+ struct libipw_device *ieee = priv->ieee;
+ struct libipw_security sec = {
.flags = SEC_AUTH_MODE,
};
int ret = 0;
@@ -5907,7 +5907,7 @@
static void ipw_ethtool_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
char fw_ver[64], ucode_ver[64];
strcpy(info->driver, DRV_NAME);
@@ -5924,7 +5924,7 @@
static u32 ipw2100_ethtool_get_link(struct net_device *dev)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
}
@@ -6011,8 +6011,8 @@
static const struct net_device_ops ipw2100_netdev_ops = {
.ndo_open = ipw2100_open,
.ndo_stop = ipw2100_close,
- .ndo_start_xmit = ieee80211_xmit,
- .ndo_change_mtu = ieee80211_change_mtu,
+ .ndo_start_xmit = libipw_xmit,
+ .ndo_change_mtu = libipw_change_mtu,
.ndo_init = ipw2100_net_init,
.ndo_tx_timeout = ipw2100_tx_timeout,
.ndo_set_mac_address = ipw2100_set_address,
@@ -6029,10 +6029,10 @@
struct ipw2100_priv *priv;
struct net_device *dev;
- dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
+ dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
if (!dev)
return NULL;
- priv = ieee80211_priv(dev);
+ priv = libipw_priv(dev);
priv->ieee = netdev_priv(dev);
priv->pci_dev = pci_dev;
priv->net_dev = dev;
@@ -6046,7 +6046,7 @@
dev->netdev_ops = &ipw2100_netdev_ops;
dev->ethtool_ops = &ipw2100_ethtool_ops;
dev->wireless_handlers = &ipw2100_wx_handler_def;
- priv->wireless_data.ieee80211 = priv->ieee;
+ priv->wireless_data.libipw = priv->ieee;
dev->wireless_data = &priv->wireless_data;
dev->watchdog_timeo = 3 * HZ;
dev->irq = 0;
@@ -6076,7 +6076,7 @@
priv->ieee->ieee802_1x = 1;
/* Set module parameters */
- switch (mode) {
+ switch (network_mode) {
case 1:
priv->ieee->iw_mode = IW_MODE_ADHOC;
break;
@@ -6202,7 +6202,7 @@
return err;
}
- priv = ieee80211_priv(dev);
+ priv = libipw_priv(dev);
pci_set_master(pci_dev);
pci_set_drvdata(pci_dev, priv);
@@ -6342,7 +6342,7 @@
sysfs_remove_group(&pci_dev->dev.kobj,
&ipw2100_attribute_group);
- free_ieee80211(dev);
+ free_ieee80211(dev, 0);
pci_set_drvdata(pci_dev, NULL);
}
@@ -6400,7 +6400,7 @@
if (dev->base_addr)
iounmap((void __iomem *)dev->base_addr);
- free_ieee80211(dev);
+ free_ieee80211(dev, 0);
}
pci_release_regions(pci_dev);
@@ -6629,7 +6629,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (!(priv->status & STATUS_ASSOCIATED))
strcpy(wrqu->name, "unassociated");
else
@@ -6643,7 +6643,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
struct iw_freq *fwrq = &wrqu->freq;
int err = 0;
@@ -6693,7 +6693,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->freq.e = 0;
@@ -6714,7 +6714,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0;
IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
@@ -6757,7 +6757,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->mode = priv->ieee->iw_mode;
IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
@@ -6792,7 +6792,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
struct iw_range *range = (struct iw_range *)extra;
u16 val;
int i, level;
@@ -6913,7 +6913,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0;
static const unsigned char any[] = {
@@ -6962,7 +6962,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
/* If we are associated, trying to associate, or have a statically
* configured BSSID then return that; otherwise return ANY */
@@ -6980,7 +6980,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
char *essid = ""; /* ANY */
int length = 0;
int err = 0;
@@ -7035,7 +7035,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
DECLARE_SSID_BUF(ssid);
/* If we are associated, trying to associate, or have a statically
@@ -7063,7 +7063,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (wrqu->data.length > IW_ESSID_MAX_SIZE)
return -E2BIG;
@@ -7085,7 +7085,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->data.length = strlen(priv->nick);
memcpy(extra, priv->nick, wrqu->data.length);
@@ -7100,7 +7100,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
u32 target_rate = wrqu->bitrate.value;
u32 rate;
int err = 0;
@@ -7140,7 +7140,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int val;
unsigned int len = sizeof(val);
int err = 0;
@@ -7192,7 +7192,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int value, err;
/* Auto RTS not yet supported */
@@ -7231,7 +7231,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
wrqu->rts.fixed = 1; /* no auto select */
@@ -7248,7 +7248,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0, value;
if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
@@ -7293,7 +7293,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
@@ -7320,7 +7320,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (!wrqu->frag.fixed)
return -EINVAL;
@@ -7350,7 +7350,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
wrqu->frag.fixed = 0; /* no auto select */
wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
@@ -7364,7 +7364,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0;
if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
@@ -7412,7 +7412,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
wrqu->retry.disabled = 0; /* can't be disabled */
@@ -7440,7 +7440,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0;
mutex_lock(&priv->action_mutex);
@@ -7472,8 +7472,8 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ return libipw_wx_get_scan(priv->ieee, info, wrqu, extra);
}
/*
@@ -7487,8 +7487,8 @@
* No check of STATUS_INITIALIZED required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ return libipw_wx_set_encode(priv->ieee, info, wrqu, key);
}
static int ipw2100_wx_get_encode(struct net_device *dev,
@@ -7499,15 +7499,15 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ return libipw_wx_get_encode(priv->ieee, info, wrqu, key);
}
static int ipw2100_wx_set_power(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0;
mutex_lock(&priv->action_mutex);
@@ -7556,7 +7556,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (!(priv->power_mode & IPW_POWER_ENABLED))
wrqu->power.disabled = 1;
@@ -7580,8 +7580,8 @@
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
u8 *buf;
if (!ieee->wpa_enabled)
@@ -7615,8 +7615,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
wrqu->data.length = 0;
@@ -7637,8 +7637,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
struct iw_param *param = &wrqu->param;
struct lib80211_crypt_data *crypt;
unsigned long flags;
@@ -7682,7 +7682,7 @@
* can use this to determine if the CAP_PRIVACY_ON bit should
* be set.
*/
- struct ieee80211_security sec = {
+ struct libipw_security sec = {
.flags = SEC_ENABLED,
.enabled = param->value,
};
@@ -7730,8 +7730,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
struct lib80211_crypt_data *crypt;
struct iw_param *param = &wrqu->param;
int ret = 0;
@@ -7792,8 +7792,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_set_encodeext(priv->ieee, info, wrqu, extra);
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra);
}
/* SIOCGIWENCODEEXT */
@@ -7801,8 +7801,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_encodeext(priv->ieee, info, wrqu, extra);
+ struct ipw2100_priv *priv = libipw_priv(dev);
+ return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra);
}
/* SIOCSIWMLME */
@@ -7810,7 +7810,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
struct iw_mlme *mlme = (struct iw_mlme *)extra;
__le16 reason;
@@ -7841,7 +7841,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int *parms = (int *)extra;
int enable = (parms[0] > 0);
int err = 0;
@@ -7872,7 +7872,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (priv->status & STATUS_INITIALIZED)
schedule_reset(priv);
return 0;
@@ -7884,7 +7884,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err = 0, mode = *(int *)extra;
mutex_lock(&priv->action_mutex);
@@ -7912,7 +7912,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int level = IPW_POWER_LEVEL(priv->power_mode);
s32 timeout, period;
@@ -7948,7 +7948,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err, mode = *(int *)extra;
mutex_lock(&priv->action_mutex);
@@ -7981,7 +7981,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (priv->config & CFG_LONG_PREAMBLE)
snprintf(wrqu->name, IFNAMSIZ, "long (1)");
@@ -7996,7 +7996,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
int err, mode = *(int *)extra;
mutex_lock(&priv->action_mutex);
@@ -8028,7 +8028,7 @@
* This can be called at any time. No action lock required
*/
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
if (priv->config & CFG_CRC_CHECK)
snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
@@ -8179,10 +8179,11 @@
int rssi_qual;
int tx_qual;
int beacon_qual;
+ int quality;
- struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ipw2100_priv *priv = libipw_priv(dev);
struct iw_statistics *wstats;
- u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
+ u32 rssi, tx_retries, missed_beacons, tx_failures;
u32 ord_len = sizeof(u32);
if (!priv)
@@ -8265,7 +8266,8 @@
beacon_qual = (20 - missed_beacons) *
(PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
- quality = min(beacon_qual, min(tx_qual, rssi_qual));
+ quality = min(tx_qual, rssi_qual);
+ quality = min(beacon_qual, quality);
#ifdef CONFIG_IPW2100_DEBUG
if (beacon_qual == quality)
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h
index f183d95..1eab0d6 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.h
+++ b/drivers/net/wireless/ipw2x00/ipw2100.h
@@ -19,7 +19,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
@@ -46,7 +46,7 @@
#include <linux/workqueue.h>
#include <linux/mutex.h>
-#include "ieee80211.h"
+#include "libipw.h"
struct ipw2100_priv;
struct ipw2100_tx_packet;
@@ -343,7 +343,7 @@
struct { /* DATA */
struct ipw2100_data_header *data;
dma_addr_t data_phys;
- struct ieee80211_txb *txb;
+ struct libipw_txb *txb;
} d_struct;
} info;
int jiffy_start;
@@ -492,7 +492,7 @@
int stop_hang_check; /* Set 1 when shutting down to kill hang_check */
int stop_rf_kill; /* Set 1 when shutting down to kill rf_kill */
- struct ieee80211_device *ieee;
+ struct libipw_device *ieee;
unsigned long status;
unsigned long config;
unsigned long capability;
@@ -788,7 +788,7 @@
#define IPW_CARD_DISABLE_PHY_OFF_COMPLETE_WAIT 100 // 100 milli
#define IPW_PREPARE_POWER_DOWN_COMPLETE_WAIT 100 // 100 milli
-#define IPW_HEADER_802_11_SIZE sizeof(struct ieee80211_hdr_3addr)
+#define IPW_HEADER_802_11_SIZE sizeof(struct libipw_hdr_3addr)
#define IPW_MAX_80211_PAYLOAD_SIZE 2304U
#define IPW_MAX_802_11_PAYLOAD_LENGTH 2312
#define IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH 1536
@@ -803,13 +803,13 @@
IPW_802_11_FCS_LENGTH)
#define IPW_802_11_PAYLOAD_OFFSET \
- (sizeof(struct ieee80211_hdr_3addr) + \
- sizeof(struct ieee80211_snap_hdr))
+ (sizeof(struct libipw_hdr_3addr) + \
+ sizeof(struct libipw_snap_hdr))
struct ipw2100_rx {
union {
unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH];
- struct ieee80211_hdr_4addr header;
+ struct libipw_hdr_4addr header;
u32 status;
struct ipw2100_notification notification;
struct ipw2100_cmd_header command;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 6dcac73..8d58e6e 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -25,7 +25,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
@@ -83,13 +83,13 @@
static int cmdlog = 0;
static int debug = 0;
-static int channel = 0;
-static int mode = 0;
+static int default_channel = 0;
+static int network_mode = 0;
static u32 ipw_debug_level;
static int associate;
static int auto_create = 1;
-static int led = 0;
+static int led_support = 0;
static int disable = 0;
static int bt_coexist = 0;
static int hwcrypto = 0;
@@ -103,6 +103,25 @@
static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */
#endif
+static struct ieee80211_rate ipw2200_rates[] = {
+ { .bitrate = 10 },
+ { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60 },
+ { .bitrate = 90 },
+ { .bitrate = 120 },
+ { .bitrate = 180 },
+ { .bitrate = 240 },
+ { .bitrate = 360 },
+ { .bitrate = 480 },
+ { .bitrate = 540 }
+};
+
+#define ipw2200_a_rates (ipw2200_rates + 4)
+#define ipw2200_num_a_rates 8
+#define ipw2200_bg_rates (ipw2200_rates + 0)
+#define ipw2200_num_bg_rates 12
#ifdef CONFIG_IPW2200_QOS
static int qos_enable = 0;
@@ -111,7 +130,7 @@
static int burst_duration_CCK = 0;
static int burst_duration_OFDM = 0;
-static struct ieee80211_qos_parameters def_qos_parameters_OFDM = {
+static struct libipw_qos_parameters def_qos_parameters_OFDM = {
{QOS_TX0_CW_MIN_OFDM, QOS_TX1_CW_MIN_OFDM, QOS_TX2_CW_MIN_OFDM,
QOS_TX3_CW_MIN_OFDM},
{QOS_TX0_CW_MAX_OFDM, QOS_TX1_CW_MAX_OFDM, QOS_TX2_CW_MAX_OFDM,
@@ -122,7 +141,7 @@
QOS_TX2_TXOP_LIMIT_OFDM, QOS_TX3_TXOP_LIMIT_OFDM}
};
-static struct ieee80211_qos_parameters def_qos_parameters_CCK = {
+static struct libipw_qos_parameters def_qos_parameters_CCK = {
{QOS_TX0_CW_MIN_CCK, QOS_TX1_CW_MIN_CCK, QOS_TX2_CW_MIN_CCK,
QOS_TX3_CW_MIN_CCK},
{QOS_TX0_CW_MAX_CCK, QOS_TX1_CW_MAX_CCK, QOS_TX2_CW_MAX_CCK,
@@ -133,7 +152,7 @@
QOS_TX3_TXOP_LIMIT_CCK}
};
-static struct ieee80211_qos_parameters def_parameters_OFDM = {
+static struct libipw_qos_parameters def_parameters_OFDM = {
{DEF_TX0_CW_MIN_OFDM, DEF_TX1_CW_MIN_OFDM, DEF_TX2_CW_MIN_OFDM,
DEF_TX3_CW_MIN_OFDM},
{DEF_TX0_CW_MAX_OFDM, DEF_TX1_CW_MAX_OFDM, DEF_TX2_CW_MAX_OFDM,
@@ -144,7 +163,7 @@
DEF_TX2_TXOP_LIMIT_OFDM, DEF_TX3_TXOP_LIMIT_OFDM}
};
-static struct ieee80211_qos_parameters def_parameters_CCK = {
+static struct libipw_qos_parameters def_parameters_CCK = {
{DEF_TX0_CW_MIN_CCK, DEF_TX1_CW_MIN_CCK, DEF_TX2_CW_MIN_CCK,
DEF_TX3_CW_MIN_CCK},
{DEF_TX0_CW_MAX_CCK, DEF_TX1_CW_MAX_CCK, DEF_TX2_CW_MAX_CCK,
@@ -164,9 +183,9 @@
static u32 ipw_qos_get_burst_duration(struct ipw_priv *priv);
-static int ipw_send_qos_params_command(struct ipw_priv *priv, struct ieee80211_qos_parameters
+static int ipw_send_qos_params_command(struct ipw_priv *priv, struct libipw_qos_parameters
*qos_param);
-static int ipw_send_qos_info_command(struct ipw_priv *priv, struct ieee80211_qos_information_element
+static int ipw_send_qos_info_command(struct ipw_priv *priv, struct libipw_qos_information_element
*qos_param);
#endif /* CONFIG_IPW2200_QOS */
@@ -1830,7 +1849,7 @@
break;
}
- if (ieee80211_is_valid_channel(priv->ieee, channel))
+ if (libipw_is_valid_channel(priv->ieee, channel))
priv->speed_scan[pos++] = channel;
else
IPW_WARNING("Skipping invalid channel request: %d\n",
@@ -1882,7 +1901,7 @@
char *buf)
{
struct ipw_priv *priv = dev_get_drvdata(d);
- const struct ieee80211_geo *geo = ieee80211_get_geo(priv->ieee);
+ const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
int len = 0, i;
len = sprintf(&buf[len],
@@ -1892,14 +1911,14 @@
for (i = 0; i < geo->bg_channels; i++) {
len += sprintf(&buf[len], "%d: BSS%s%s, %s, Band %s.\n",
geo->bg[i].channel,
- geo->bg[i].flags & IEEE80211_CH_RADAR_DETECT ?
+ geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT ?
" (radar spectrum)" : "",
- ((geo->bg[i].flags & IEEE80211_CH_NO_IBSS) ||
- (geo->bg[i].flags & IEEE80211_CH_RADAR_DETECT))
+ ((geo->bg[i].flags & LIBIPW_CH_NO_IBSS) ||
+ (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT))
? "" : ", IBSS",
- geo->bg[i].flags & IEEE80211_CH_PASSIVE_ONLY ?
+ geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY ?
"passive only" : "active/passive",
- geo->bg[i].flags & IEEE80211_CH_B_ONLY ?
+ geo->bg[i].flags & LIBIPW_CH_B_ONLY ?
"B" : "B/G");
}
@@ -1909,12 +1928,12 @@
for (i = 0; i < geo->a_channels; i++) {
len += sprintf(&buf[len], "%d: BSS%s%s, %s.\n",
geo->a[i].channel,
- geo->a[i].flags & IEEE80211_CH_RADAR_DETECT ?
+ geo->a[i].flags & LIBIPW_CH_RADAR_DETECT ?
" (radar spectrum)" : "",
- ((geo->a[i].flags & IEEE80211_CH_NO_IBSS) ||
- (geo->a[i].flags & IEEE80211_CH_RADAR_DETECT))
+ ((geo->a[i].flags & LIBIPW_CH_NO_IBSS) ||
+ (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT))
? "" : ", IBSS",
- geo->a[i].flags & IEEE80211_CH_PASSIVE_ONLY ?
+ geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY ?
"passive only" : "active/passive");
}
@@ -2429,7 +2448,7 @@
static int ipw_set_tx_power(struct ipw_priv *priv)
{
- const struct ieee80211_geo *geo = ieee80211_get_geo(priv->ieee);
+ const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
struct ipw_tx_power tx_power;
s8 max_power;
int i;
@@ -2874,45 +2893,27 @@
return 0;
}
-static int ipw_fw_dma_add_buffer(struct ipw_priv *priv,
- u32 src_phys, u32 dest_address, u32 length)
+static int ipw_fw_dma_add_buffer(struct ipw_priv *priv, dma_addr_t *src_address,
+ int nr, u32 dest_address, u32 len)
{
- u32 bytes_left = length;
- u32 src_offset = 0;
- u32 dest_offset = 0;
- int status = 0;
+ int ret, i;
+ u32 size;
+
IPW_DEBUG_FW(">> \n");
- IPW_DEBUG_FW_INFO("src_phys=0x%x dest_address=0x%x length=0x%x\n",
- src_phys, dest_address, length);
- while (bytes_left > CB_MAX_LENGTH) {
- status = ipw_fw_dma_add_command_block(priv,
- src_phys + src_offset,
- dest_address +
- dest_offset,
- CB_MAX_LENGTH, 0, 0);
- if (status) {
+ IPW_DEBUG_FW_INFO("nr=%d dest_address=0x%x len=0x%x\n",
+ nr, dest_address, len);
+
+ for (i = 0; i < nr; i++) {
+ size = min_t(u32, len - i * CB_MAX_LENGTH, CB_MAX_LENGTH);
+ ret = ipw_fw_dma_add_command_block(priv, src_address[i],
+ dest_address +
+ i * CB_MAX_LENGTH, size,
+ 0, 0);
+ if (ret) {
IPW_DEBUG_FW_INFO(": Failed\n");
return -1;
} else
IPW_DEBUG_FW_INFO(": Added new cb\n");
-
- src_offset += CB_MAX_LENGTH;
- dest_offset += CB_MAX_LENGTH;
- bytes_left -= CB_MAX_LENGTH;
- }
-
- /* add the buffer tail */
- if (bytes_left > 0) {
- status =
- ipw_fw_dma_add_command_block(priv, src_phys + src_offset,
- dest_address + dest_offset,
- bytes_left, 0, 0);
- if (status) {
- IPW_DEBUG_FW_INFO(": Failed on the buffer tail\n");
- return -1;
- } else
- IPW_DEBUG_FW_INFO
- (": Adding new cb - the buffer tail\n");
}
IPW_DEBUG_FW("<< \n");
@@ -2960,12 +2961,12 @@
static void ipw_remove_current_network(struct ipw_priv *priv)
{
struct list_head *element, *safe;
- struct ieee80211_network *network = NULL;
+ struct libipw_network *network = NULL;
unsigned long flags;
spin_lock_irqsave(&priv->ieee->lock, flags);
list_for_each_safe(element, safe, &priv->ieee->network_list) {
- network = list_entry(element, struct ieee80211_network, list);
+ network = list_entry(element, struct libipw_network, list);
if (!memcmp(network->bssid, priv->bssid, ETH_ALEN)) {
list_del(element);
list_add_tail(&network->list,
@@ -3160,59 +3161,91 @@
static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
{
- int rc = -1;
+ int ret = -1;
int offset = 0;
struct fw_chunk *chunk;
- dma_addr_t shared_phys;
- u8 *shared_virt;
+ int total_nr = 0;
+ int i;
+ struct pci_pool *pool;
+ u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
+ dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
IPW_DEBUG_TRACE("<< : \n");
- shared_virt = pci_alloc_consistent(priv->pci_dev, len, &shared_phys);
- if (!shared_virt)
+ pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
+ if (!pool) {
+ IPW_ERROR("pci_pool_create failed\n");
return -ENOMEM;
-
- memmove(shared_virt, data, len);
+ }
/* Start the Dma */
- rc = ipw_fw_dma_enable(priv);
+ ret = ipw_fw_dma_enable(priv);
/* the DMA is already ready this would be a bug. */
BUG_ON(priv->sram_desc.last_cb_index > 0);
do {
+ u32 chunk_len;
+ u8 *start;
+ int size;
+ int nr = 0;
+
chunk = (struct fw_chunk *)(data + offset);
offset += sizeof(struct fw_chunk);
+ chunk_len = le32_to_cpu(chunk->length);
+ start = data + offset;
+
+ nr = (chunk_len + CB_MAX_LENGTH - 1) / CB_MAX_LENGTH;
+ for (i = 0; i < nr; i++) {
+ virts[total_nr] = pci_pool_alloc(pool, GFP_KERNEL,
+ &phys[total_nr]);
+ if (!virts[total_nr]) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ size = min_t(u32, chunk_len - i * CB_MAX_LENGTH,
+ CB_MAX_LENGTH);
+ memcpy(virts[total_nr], start, size);
+ start += size;
+ total_nr++;
+ /* We don't support fw chunk larger than 64*8K */
+ BUG_ON(total_nr > CB_NUMBER_OF_ELEMENTS_SMALL);
+ }
+
/* build DMA packet and queue up for sending */
/* dma to chunk->address, the chunk->length bytes from data +
* offeset*/
/* Dma loading */
- rc = ipw_fw_dma_add_buffer(priv, shared_phys + offset,
- le32_to_cpu(chunk->address),
- le32_to_cpu(chunk->length));
- if (rc) {
+ ret = ipw_fw_dma_add_buffer(priv, &phys[total_nr - nr],
+ nr, le32_to_cpu(chunk->address),
+ chunk_len);
+ if (ret) {
IPW_DEBUG_INFO("dmaAddBuffer Failed\n");
goto out;
}
- offset += le32_to_cpu(chunk->length);
+ offset += chunk_len;
} while (offset < len);
/* Run the DMA and wait for the answer */
- rc = ipw_fw_dma_kick(priv);
- if (rc) {
+ ret = ipw_fw_dma_kick(priv);
+ if (ret) {
IPW_ERROR("dmaKick Failed\n");
goto out;
}
- rc = ipw_fw_dma_wait(priv);
- if (rc) {
+ ret = ipw_fw_dma_wait(priv);
+ if (ret) {
IPW_ERROR("dmaWaitSync Failed\n");
goto out;
}
- out:
- pci_free_consistent(priv->pci_dev, len, shared_virt, shared_phys);
- return rc;
+ out:
+ for (i = 0; i < total_nr; i++)
+ pci_pool_free(pool, virts[i], phys[i]);
+
+ pci_pool_destroy(pool);
+
+ return ret;
}
/* stop nic */
@@ -3751,7 +3784,7 @@
le16_to_cpu(bd->u.data.chunk_len[i]),
PCI_DMA_TODEVICE);
if (txq->txb[txq->q.last_used]) {
- ieee80211_txb_free(txq->txb[txq->q.last_used]);
+ libipw_txb_free(txq->txb[txq->q.last_used]);
txq->txb[txq->q.last_used] = NULL;
}
}
@@ -4070,7 +4103,7 @@
/* If currently associated in B mode, restrict the maximum
* rate match to B rates */
if (priv->assoc_request.ieee_mode == IPW_B_MODE)
- mask &= IEEE80211_CCK_RATES_MASK;
+ mask &= LIBIPW_CCK_RATES_MASK;
/* TODO: Verify that the rate is supported by the current rates
* list. */
@@ -4078,29 +4111,29 @@
while (i && !(mask & i))
i >>= 1;
switch (i) {
- case IEEE80211_CCK_RATE_1MB_MASK:
+ case LIBIPW_CCK_RATE_1MB_MASK:
return 1000000;
- case IEEE80211_CCK_RATE_2MB_MASK:
+ case LIBIPW_CCK_RATE_2MB_MASK:
return 2000000;
- case IEEE80211_CCK_RATE_5MB_MASK:
+ case LIBIPW_CCK_RATE_5MB_MASK:
return 5500000;
- case IEEE80211_OFDM_RATE_6MB_MASK:
+ case LIBIPW_OFDM_RATE_6MB_MASK:
return 6000000;
- case IEEE80211_OFDM_RATE_9MB_MASK:
+ case LIBIPW_OFDM_RATE_9MB_MASK:
return 9000000;
- case IEEE80211_CCK_RATE_11MB_MASK:
+ case LIBIPW_CCK_RATE_11MB_MASK:
return 11000000;
- case IEEE80211_OFDM_RATE_12MB_MASK:
+ case LIBIPW_OFDM_RATE_12MB_MASK:
return 12000000;
- case IEEE80211_OFDM_RATE_18MB_MASK:
+ case LIBIPW_OFDM_RATE_18MB_MASK:
return 18000000;
- case IEEE80211_OFDM_RATE_24MB_MASK:
+ case LIBIPW_OFDM_RATE_24MB_MASK:
return 24000000;
- case IEEE80211_OFDM_RATE_36MB_MASK:
+ case LIBIPW_OFDM_RATE_36MB_MASK:
return 36000000;
- case IEEE80211_OFDM_RATE_48MB_MASK:
+ case LIBIPW_OFDM_RATE_48MB_MASK:
return 48000000;
- case IEEE80211_OFDM_RATE_54MB_MASK:
+ case LIBIPW_OFDM_RATE_54MB_MASK:
return 54000000;
}
@@ -4265,9 +4298,10 @@
IPW_DEBUG_STATS("Signal level : %3d%% (%d dBm)\n",
signal_quality, rssi);
- quality = min(beacon_quality,
- min(rate_quality,
- min(tx_quality, min(rx_quality, signal_quality))));
+ quality = min(rx_quality, signal_quality);
+ quality = min(tx_quality, quality);
+ quality = min(rate_quality, quality);
+ quality = min(beacon_quality, quality);
if (quality == beacon_quality)
IPW_DEBUG_STATS("Quality (%d%%): Clamped to missed beacons.\n",
quality);
@@ -4411,7 +4445,6 @@
{
DECLARE_SSID_BUF(ssid);
u16 size = le16_to_cpu(notif->size);
- notif->size = le16_to_cpu(notif->size);
IPW_DEBUG_NOTIF("type = %i (%d bytes)\n", notif->subtype, size);
@@ -4466,11 +4499,11 @@
== IEEE80211_STYPE_ASSOC_RESP)) {
if ((sizeof
(struct
- ieee80211_assoc_response)
+ libipw_assoc_response)
<= size)
&& (size <= 2314)) {
struct
- ieee80211_rx_stats
+ libipw_rx_stats
stats = {
.len = size - 1,
};
@@ -4478,10 +4511,10 @@
IPW_DEBUG_QOS
("QoS Associate "
"size %d\n", size);
- ieee80211_rx_mgt(priv->
+ libipw_rx_mgt(priv->
ieee,
(struct
- ieee80211_hdr_4addr
+ libipw_hdr_4addr
*)
¬if->u.raw, &stats);
}
@@ -4537,11 +4570,11 @@
case CMAS_INIT:{
if (priv->status & STATUS_AUTH) {
struct
- ieee80211_assoc_response
+ libipw_assoc_response
*resp;
resp =
(struct
- ieee80211_assoc_response
+ libipw_assoc_response
*)¬if->u.raw;
IPW_DEBUG(IPW_DL_NOTIF |
IPW_DL_STATE |
@@ -5227,33 +5260,33 @@
static int ipw_is_rate_in_mask(struct ipw_priv *priv, int ieee_mode, u8 rate)
{
- rate &= ~IEEE80211_BASIC_RATE_MASK;
+ rate &= ~LIBIPW_BASIC_RATE_MASK;
if (ieee_mode == IEEE_A) {
switch (rate) {
- case IEEE80211_OFDM_RATE_6MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_6MB_MASK ?
+ case LIBIPW_OFDM_RATE_6MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_6MB_MASK ?
1 : 0;
- case IEEE80211_OFDM_RATE_9MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_9MB_MASK ?
+ case LIBIPW_OFDM_RATE_9MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_9MB_MASK ?
1 : 0;
- case IEEE80211_OFDM_RATE_12MB:
+ case LIBIPW_OFDM_RATE_12MB:
return priv->
- rates_mask & IEEE80211_OFDM_RATE_12MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_18MB:
+ rates_mask & LIBIPW_OFDM_RATE_12MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_18MB:
return priv->
- rates_mask & IEEE80211_OFDM_RATE_18MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_24MB:
+ rates_mask & LIBIPW_OFDM_RATE_18MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_24MB:
return priv->
- rates_mask & IEEE80211_OFDM_RATE_24MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_36MB:
+ rates_mask & LIBIPW_OFDM_RATE_24MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_36MB:
return priv->
- rates_mask & IEEE80211_OFDM_RATE_36MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_48MB:
+ rates_mask & LIBIPW_OFDM_RATE_36MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_48MB:
return priv->
- rates_mask & IEEE80211_OFDM_RATE_48MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_54MB:
+ rates_mask & LIBIPW_OFDM_RATE_48MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_54MB:
return priv->
- rates_mask & IEEE80211_OFDM_RATE_54MB_MASK ? 1 : 0;
+ rates_mask & LIBIPW_OFDM_RATE_54MB_MASK ? 1 : 0;
default:
return 0;
}
@@ -5261,14 +5294,14 @@
/* B and G mixed */
switch (rate) {
- case IEEE80211_CCK_RATE_1MB:
- return priv->rates_mask & IEEE80211_CCK_RATE_1MB_MASK ? 1 : 0;
- case IEEE80211_CCK_RATE_2MB:
- return priv->rates_mask & IEEE80211_CCK_RATE_2MB_MASK ? 1 : 0;
- case IEEE80211_CCK_RATE_5MB:
- return priv->rates_mask & IEEE80211_CCK_RATE_5MB_MASK ? 1 : 0;
- case IEEE80211_CCK_RATE_11MB:
- return priv->rates_mask & IEEE80211_CCK_RATE_11MB_MASK ? 1 : 0;
+ case LIBIPW_CCK_RATE_1MB:
+ return priv->rates_mask & LIBIPW_CCK_RATE_1MB_MASK ? 1 : 0;
+ case LIBIPW_CCK_RATE_2MB:
+ return priv->rates_mask & LIBIPW_CCK_RATE_2MB_MASK ? 1 : 0;
+ case LIBIPW_CCK_RATE_5MB:
+ return priv->rates_mask & LIBIPW_CCK_RATE_5MB_MASK ? 1 : 0;
+ case LIBIPW_CCK_RATE_11MB:
+ return priv->rates_mask & LIBIPW_CCK_RATE_11MB_MASK ? 1 : 0;
}
/* If we are limited to B modulations, bail at this point */
@@ -5277,29 +5310,29 @@
/* G */
switch (rate) {
- case IEEE80211_OFDM_RATE_6MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_6MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_9MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_9MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_12MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_12MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_18MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_18MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_24MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_24MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_36MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_36MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_48MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_48MB_MASK ? 1 : 0;
- case IEEE80211_OFDM_RATE_54MB:
- return priv->rates_mask & IEEE80211_OFDM_RATE_54MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_6MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_6MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_9MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_9MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_12MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_12MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_18MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_18MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_24MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_24MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_36MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_36MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_48MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_48MB_MASK ? 1 : 0;
+ case LIBIPW_OFDM_RATE_54MB:
+ return priv->rates_mask & LIBIPW_OFDM_RATE_54MB_MASK ? 1 : 0;
}
return 0;
}
static int ipw_compatible_rates(struct ipw_priv *priv,
- const struct ieee80211_network *network,
+ const struct libipw_network *network,
struct ipw_supported_rates *rates)
{
int num_rates, i;
@@ -5311,7 +5344,7 @@
if (!ipw_is_rate_in_mask(priv, network->mode,
network->rates[i])) {
- if (network->rates[i] & IEEE80211_BASIC_RATE_MASK) {
+ if (network->rates[i] & LIBIPW_BASIC_RATE_MASK) {
IPW_DEBUG_SCAN("Adding masked mandatory "
"rate %02X\n",
network->rates[i]);
@@ -5333,7 +5366,7 @@
for (i = 0; i < num_rates; i++) {
if (!ipw_is_rate_in_mask(priv, network->mode,
network->rates_ex[i])) {
- if (network->rates_ex[i] & IEEE80211_BASIC_RATE_MASK) {
+ if (network->rates_ex[i] & LIBIPW_BASIC_RATE_MASK) {
IPW_DEBUG_SCAN("Adding masked mandatory "
"rate %02X\n",
network->rates_ex[i]);
@@ -5369,73 +5402,73 @@
static void ipw_add_cck_scan_rates(struct ipw_supported_rates *rates,
u8 modulation, u32 rate_mask)
{
- u8 basic_mask = (IEEE80211_OFDM_MODULATION == modulation) ?
- IEEE80211_BASIC_RATE_MASK : 0;
+ u8 basic_mask = (LIBIPW_OFDM_MODULATION == modulation) ?
+ LIBIPW_BASIC_RATE_MASK : 0;
- if (rate_mask & IEEE80211_CCK_RATE_1MB_MASK)
+ if (rate_mask & LIBIPW_CCK_RATE_1MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+ LIBIPW_BASIC_RATE_MASK | LIBIPW_CCK_RATE_1MB;
- if (rate_mask & IEEE80211_CCK_RATE_2MB_MASK)
+ if (rate_mask & LIBIPW_CCK_RATE_2MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+ LIBIPW_BASIC_RATE_MASK | LIBIPW_CCK_RATE_2MB;
- if (rate_mask & IEEE80211_CCK_RATE_5MB_MASK)
+ if (rate_mask & LIBIPW_CCK_RATE_5MB_MASK)
rates->supported_rates[rates->num_rates++] = basic_mask |
- IEEE80211_CCK_RATE_5MB;
+ LIBIPW_CCK_RATE_5MB;
- if (rate_mask & IEEE80211_CCK_RATE_11MB_MASK)
+ if (rate_mask & LIBIPW_CCK_RATE_11MB_MASK)
rates->supported_rates[rates->num_rates++] = basic_mask |
- IEEE80211_CCK_RATE_11MB;
+ LIBIPW_CCK_RATE_11MB;
}
static void ipw_add_ofdm_scan_rates(struct ipw_supported_rates *rates,
u8 modulation, u32 rate_mask)
{
- u8 basic_mask = (IEEE80211_OFDM_MODULATION == modulation) ?
- IEEE80211_BASIC_RATE_MASK : 0;
+ u8 basic_mask = (LIBIPW_OFDM_MODULATION == modulation) ?
+ LIBIPW_BASIC_RATE_MASK : 0;
- if (rate_mask & IEEE80211_OFDM_RATE_6MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_6MB_MASK)
rates->supported_rates[rates->num_rates++] = basic_mask |
- IEEE80211_OFDM_RATE_6MB;
+ LIBIPW_OFDM_RATE_6MB;
- if (rate_mask & IEEE80211_OFDM_RATE_9MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_9MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_OFDM_RATE_9MB;
+ LIBIPW_OFDM_RATE_9MB;
- if (rate_mask & IEEE80211_OFDM_RATE_12MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_12MB_MASK)
rates->supported_rates[rates->num_rates++] = basic_mask |
- IEEE80211_OFDM_RATE_12MB;
+ LIBIPW_OFDM_RATE_12MB;
- if (rate_mask & IEEE80211_OFDM_RATE_18MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_18MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_OFDM_RATE_18MB;
+ LIBIPW_OFDM_RATE_18MB;
- if (rate_mask & IEEE80211_OFDM_RATE_24MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_24MB_MASK)
rates->supported_rates[rates->num_rates++] = basic_mask |
- IEEE80211_OFDM_RATE_24MB;
+ LIBIPW_OFDM_RATE_24MB;
- if (rate_mask & IEEE80211_OFDM_RATE_36MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_36MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_OFDM_RATE_36MB;
+ LIBIPW_OFDM_RATE_36MB;
- if (rate_mask & IEEE80211_OFDM_RATE_48MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_48MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_OFDM_RATE_48MB;
+ LIBIPW_OFDM_RATE_48MB;
- if (rate_mask & IEEE80211_OFDM_RATE_54MB_MASK)
+ if (rate_mask & LIBIPW_OFDM_RATE_54MB_MASK)
rates->supported_rates[rates->num_rates++] =
- IEEE80211_OFDM_RATE_54MB;
+ LIBIPW_OFDM_RATE_54MB;
}
struct ipw_network_match {
- struct ieee80211_network *network;
+ struct libipw_network *network;
struct ipw_supported_rates rates;
};
static int ipw_find_adhoc_network(struct ipw_priv *priv,
struct ipw_network_match *match,
- struct ieee80211_network *network,
+ struct libipw_network *network,
int roaming)
{
struct ipw_supported_rates rates;
@@ -5556,7 +5589,7 @@
}
/* Filter out any incompatible freq / mode combinations */
- if (!ieee80211_is_valid_mode(priv->ieee, network->mode)) {
+ if (!libipw_is_valid_mode(priv->ieee, network->mode)) {
IPW_DEBUG_MERGE("Network '%s (%pM)' excluded "
"because of invalid frequency/mode "
"combination.\n",
@@ -5606,7 +5639,7 @@
DECLARE_SSID_BUF(ssid);
struct ipw_priv *priv =
container_of(work, struct ipw_priv, merge_networks);
- struct ieee80211_network *network = NULL;
+ struct libipw_network *network = NULL;
struct ipw_network_match match = {
.network = priv->assoc_network
};
@@ -5648,7 +5681,7 @@
static int ipw_best_network(struct ipw_priv *priv,
struct ipw_network_match *match,
- struct ieee80211_network *network, int roaming)
+ struct libipw_network *network, int roaming)
{
struct ipw_supported_rates rates;
DECLARE_SSID_BUF(ssid);
@@ -5782,7 +5815,7 @@
}
/* Filter out any incompatible freq / mode combinations */
- if (!ieee80211_is_valid_mode(priv->ieee, network->mode)) {
+ if (!libipw_is_valid_mode(priv->ieee, network->mode)) {
IPW_DEBUG_ASSOC("Network '%s (%pM)' excluded "
"because of invalid frequency/mode "
"combination.\n",
@@ -5793,7 +5826,7 @@
}
/* Filter out invalid channel in current GEO */
- if (!ieee80211_is_valid_channel(priv->ieee, network->channel)) {
+ if (!libipw_is_valid_channel(priv->ieee, network->channel)) {
IPW_DEBUG_ASSOC("Network '%s (%pM)' excluded "
"because of invalid channel in current GEO\n",
print_ssid(ssid, network->ssid,
@@ -5839,9 +5872,9 @@
}
static void ipw_adhoc_create(struct ipw_priv *priv,
- struct ieee80211_network *network)
+ struct libipw_network *network)
{
- const struct ieee80211_geo *geo = ieee80211_get_geo(priv->ieee);
+ const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
int i;
/*
@@ -5856,25 +5889,25 @@
* FW fatal error.
*
*/
- switch (ieee80211_is_valid_channel(priv->ieee, priv->channel)) {
- case IEEE80211_52GHZ_BAND:
+ switch (libipw_is_valid_channel(priv->ieee, priv->channel)) {
+ case LIBIPW_52GHZ_BAND:
network->mode = IEEE_A;
- i = ieee80211_channel_to_index(priv->ieee, priv->channel);
+ i = libipw_channel_to_index(priv->ieee, priv->channel);
BUG_ON(i == -1);
- if (geo->a[i].flags & IEEE80211_CH_PASSIVE_ONLY) {
+ if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY) {
IPW_WARNING("Overriding invalid channel\n");
priv->channel = geo->a[0].channel;
}
break;
- case IEEE80211_24GHZ_BAND:
+ case LIBIPW_24GHZ_BAND:
if (priv->ieee->mode & IEEE_G)
network->mode = IEEE_G;
else
network->mode = IEEE_B;
- i = ieee80211_channel_to_index(priv->ieee, priv->channel);
+ i = libipw_channel_to_index(priv->ieee, priv->channel);
BUG_ON(i == -1);
- if (geo->bg[i].flags & IEEE80211_CH_PASSIVE_ONLY) {
+ if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) {
IPW_WARNING("Overriding invalid channel\n");
priv->channel = geo->bg[0].channel;
}
@@ -6101,70 +6134,71 @@
static void ipw_set_fixed_rate(struct ipw_priv *priv, int mode)
{
/* TODO: Verify that this works... */
- struct ipw_fixed_rate fr = {
- .tx_rates = priv->rates_mask
- };
+ struct ipw_fixed_rate fr;
u32 reg;
u16 mask = 0;
+ u16 new_tx_rates = priv->rates_mask;
/* Identify 'current FW band' and match it with the fixed
* Tx rates */
switch (priv->ieee->freq_band) {
- case IEEE80211_52GHZ_BAND: /* A only */
+ case LIBIPW_52GHZ_BAND: /* A only */
/* IEEE_A */
- if (priv->rates_mask & ~IEEE80211_OFDM_RATES_MASK) {
+ if (priv->rates_mask & ~LIBIPW_OFDM_RATES_MASK) {
/* Invalid fixed rate mask */
IPW_DEBUG_WX
("invalid fixed rate mask in ipw_set_fixed_rate\n");
- fr.tx_rates = 0;
+ new_tx_rates = 0;
break;
}
- fr.tx_rates >>= IEEE80211_OFDM_SHIFT_MASK_A;
+ new_tx_rates >>= LIBIPW_OFDM_SHIFT_MASK_A;
break;
default: /* 2.4Ghz or Mixed */
/* IEEE_B */
if (mode == IEEE_B) {
- if (fr.tx_rates & ~IEEE80211_CCK_RATES_MASK) {
+ if (new_tx_rates & ~LIBIPW_CCK_RATES_MASK) {
/* Invalid fixed rate mask */
IPW_DEBUG_WX
("invalid fixed rate mask in ipw_set_fixed_rate\n");
- fr.tx_rates = 0;
+ new_tx_rates = 0;
}
break;
}
/* IEEE_G */
- if (fr.tx_rates & ~(IEEE80211_CCK_RATES_MASK |
- IEEE80211_OFDM_RATES_MASK)) {
+ if (new_tx_rates & ~(LIBIPW_CCK_RATES_MASK |
+ LIBIPW_OFDM_RATES_MASK)) {
/* Invalid fixed rate mask */
IPW_DEBUG_WX
("invalid fixed rate mask in ipw_set_fixed_rate\n");
- fr.tx_rates = 0;
+ new_tx_rates = 0;
break;
}
- if (IEEE80211_OFDM_RATE_6MB_MASK & fr.tx_rates) {
- mask |= (IEEE80211_OFDM_RATE_6MB_MASK >> 1);
- fr.tx_rates &= ~IEEE80211_OFDM_RATE_6MB_MASK;
+ if (LIBIPW_OFDM_RATE_6MB_MASK & new_tx_rates) {
+ mask |= (LIBIPW_OFDM_RATE_6MB_MASK >> 1);
+ new_tx_rates &= ~LIBIPW_OFDM_RATE_6MB_MASK;
}
- if (IEEE80211_OFDM_RATE_9MB_MASK & fr.tx_rates) {
- mask |= (IEEE80211_OFDM_RATE_9MB_MASK >> 1);
- fr.tx_rates &= ~IEEE80211_OFDM_RATE_9MB_MASK;
+ if (LIBIPW_OFDM_RATE_9MB_MASK & new_tx_rates) {
+ mask |= (LIBIPW_OFDM_RATE_9MB_MASK >> 1);
+ new_tx_rates &= ~LIBIPW_OFDM_RATE_9MB_MASK;
}
- if (IEEE80211_OFDM_RATE_12MB_MASK & fr.tx_rates) {
- mask |= (IEEE80211_OFDM_RATE_12MB_MASK >> 1);
- fr.tx_rates &= ~IEEE80211_OFDM_RATE_12MB_MASK;
+ if (LIBIPW_OFDM_RATE_12MB_MASK & new_tx_rates) {
+ mask |= (LIBIPW_OFDM_RATE_12MB_MASK >> 1);
+ new_tx_rates &= ~LIBIPW_OFDM_RATE_12MB_MASK;
}
- fr.tx_rates |= mask;
+ new_tx_rates |= mask;
break;
}
+ fr.tx_rates = cpu_to_le16(new_tx_rates);
+
reg = ipw_read32(priv, IPW_MEM_FIXED_OVERRIDE);
ipw_write_reg32(priv, reg, *(u32 *) & fr);
}
@@ -6189,12 +6223,12 @@
int scan_type)
{
int channel_index = 0;
- const struct ieee80211_geo *geo;
+ const struct libipw_geo *geo;
int i;
- geo = ieee80211_get_geo(priv->ieee);
+ geo = libipw_get_geo(priv->ieee);
- if (priv->ieee->freq_band & IEEE80211_52GHZ_BAND) {
+ if (priv->ieee->freq_band & LIBIPW_52GHZ_BAND) {
int start = channel_index;
for (i = 0; i < geo->a_channels; i++) {
if ((priv->status & STATUS_ASSOCIATED) &&
@@ -6204,7 +6238,7 @@
scan->channels_list[channel_index] = geo->a[i].channel;
ipw_set_scan_type(scan, channel_index,
geo->a[i].
- flags & IEEE80211_CH_PASSIVE_ONLY ?
+ flags & LIBIPW_CH_PASSIVE_ONLY ?
IPW_SCAN_PASSIVE_FULL_DWELL_SCAN :
scan_type);
}
@@ -6216,11 +6250,11 @@
}
}
- if (priv->ieee->freq_band & IEEE80211_24GHZ_BAND) {
+ if (priv->ieee->freq_band & LIBIPW_24GHZ_BAND) {
int start = channel_index;
if (priv->config & CFG_SPEED_SCAN) {
int index;
- u8 channels[IEEE80211_24GHZ_CHANNELS] = {
+ u8 channels[LIBIPW_24GHZ_CHANNELS] = {
/* nop out the list */
[0] = 0
};
@@ -6252,11 +6286,11 @@
channel_index++;
scan->channels_list[channel_index] = channel;
index =
- ieee80211_channel_to_index(priv->ieee, channel);
+ libipw_channel_to_index(priv->ieee, channel);
ipw_set_scan_type(scan, channel_index,
geo->bg[index].
flags &
- IEEE80211_CH_PASSIVE_ONLY ?
+ LIBIPW_CH_PASSIVE_ONLY ?
IPW_SCAN_PASSIVE_FULL_DWELL_SCAN
: scan_type);
}
@@ -6271,7 +6305,7 @@
ipw_set_scan_type(scan, channel_index,
geo->bg[i].
flags &
- IEEE80211_CH_PASSIVE_ONLY ?
+ LIBIPW_CH_PASSIVE_ONLY ?
IPW_SCAN_PASSIVE_FULL_DWELL_SCAN
: scan_type);
}
@@ -6338,7 +6372,7 @@
}
memset(&scan, 0, sizeof(scan));
- scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee));
+ scan.full_scan_index = cpu_to_le32(libipw_get_scans(priv->ieee));
if (type == IW_SCAN_TYPE_PASSIVE) {
IPW_DEBUG_WX("use passive scanning\n");
@@ -6369,13 +6403,13 @@
u8 channel;
u8 band = 0;
- switch (ieee80211_is_valid_channel(priv->ieee, priv->channel)) {
- case IEEE80211_52GHZ_BAND:
+ switch (libipw_is_valid_channel(priv->ieee, priv->channel)) {
+ case LIBIPW_52GHZ_BAND:
band = (u8) (IPW_A_MODE << 6) | 1;
channel = priv->channel;
break;
- case IEEE80211_24GHZ_BAND:
+ case LIBIPW_24GHZ_BAND:
band = (u8) (IPW_B_MODE << 6) | 1;
channel = priv->channel;
break;
@@ -6496,8 +6530,8 @@
static int ipw_wpa_set_auth_algs(struct ipw_priv *priv, int value)
{
- struct ieee80211_device *ieee = priv->ieee;
- struct ieee80211_security sec = {
+ struct libipw_device *ieee = priv->ieee;
+ struct libipw_security sec = {
.flags = SEC_AUTH_MODE,
};
int ret = 0;
@@ -6547,8 +6581,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
u8 *buf;
int err = 0;
@@ -6583,8 +6617,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
int err = 0;
if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
@@ -6626,8 +6660,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
struct iw_param *param = &wrqu->param;
struct lib80211_crypt_data *crypt;
unsigned long flags;
@@ -6678,7 +6712,7 @@
* can use this to determine if the CAP_PRIVACY_ON bit should
* be set.
*/
- struct ieee80211_security sec = {
+ struct libipw_security sec = {
.flags = SEC_ENABLED,
.enabled = param->value,
};
@@ -6726,8 +6760,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
+ struct ipw_priv *priv = libipw_priv(dev);
+ struct libipw_device *ieee = priv->ieee;
struct lib80211_crypt_data *crypt;
struct iw_param *param = &wrqu->param;
int ret = 0;
@@ -6785,7 +6819,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
if (hwcrypto) {
@@ -6807,7 +6841,7 @@
}
}
- return ieee80211_wx_set_encodeext(priv->ieee, info, wrqu, extra);
+ return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra);
}
/* SIOCGIWENCODEEXT */
@@ -6815,8 +6849,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_encodeext(priv->ieee, info, wrqu, extra);
+ struct ipw_priv *priv = libipw_priv(dev);
+ return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra);
}
/* SIOCSIWMLME */
@@ -6824,7 +6858,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
struct iw_mlme *mlme = (struct iw_mlme *)extra;
__le16 reason;
@@ -6874,9 +6908,9 @@
*/
static int ipw_qos_handle_probe_response(struct ipw_priv *priv,
int active_network,
- struct ieee80211_network *network)
+ struct libipw_network *network)
{
- u32 size = sizeof(struct ieee80211_qos_parameters);
+ u32 size = sizeof(struct libipw_qos_parameters);
if (network->capability & WLAN_CAPABILITY_IBSS)
network->qos_data.active = network->qos_data.supported;
@@ -6934,12 +6968,12 @@
* IPW_CMD_QOS_PARAMETERS and IPW_CMD_WME_INFO
*/
static int ipw_qos_activate(struct ipw_priv *priv,
- struct ieee80211_qos_data *qos_network_data)
+ struct libipw_qos_data *qos_network_data)
{
int err;
- struct ieee80211_qos_parameters qos_parameters[QOS_QOS_SETS];
- struct ieee80211_qos_parameters *active_one = NULL;
- u32 size = sizeof(struct ieee80211_qos_parameters);
+ struct libipw_qos_parameters qos_parameters[QOS_QOS_SETS];
+ struct libipw_qos_parameters *active_one = NULL;
+ u32 size = sizeof(struct libipw_qos_parameters);
u32 burst_duration;
int i;
u8 type;
@@ -7000,7 +7034,7 @@
IPW_DEBUG_QOS("QoS sending IPW_CMD_QOS_PARAMETERS\n");
err = ipw_send_qos_params_command(priv,
- (struct ieee80211_qos_parameters *)
+ (struct libipw_qos_parameters *)
&(qos_parameters[0]));
if (err)
IPW_DEBUG_QOS("QoS IPW_CMD_QOS_PARAMETERS failed\n");
@@ -7014,13 +7048,13 @@
static int ipw_qos_set_info_element(struct ipw_priv *priv)
{
int ret = 0;
- struct ieee80211_qos_information_element qos_info;
+ struct libipw_qos_information_element qos_info;
if (priv == NULL)
return -1;
qos_info.elementID = QOS_ELEMENT_ID;
- qos_info.length = sizeof(struct ieee80211_qos_information_element) - 2;
+ qos_info.length = sizeof(struct libipw_qos_information_element) - 2;
qos_info.version = QOS_VERSION_1;
qos_info.ac_info = 0;
@@ -7040,11 +7074,11 @@
* Set the QoS parameter with the association request structure
*/
static int ipw_qos_association(struct ipw_priv *priv,
- struct ieee80211_network *network)
+ struct libipw_network *network)
{
int err = 0;
- struct ieee80211_qos_data *qos_data = NULL;
- struct ieee80211_qos_data ibss_data = {
+ struct libipw_qos_data *qos_data = NULL;
+ struct libipw_qos_data ibss_data = {
.supported = 1,
.active = 1,
};
@@ -7086,11 +7120,11 @@
* setting
*/
static int ipw_qos_association_resp(struct ipw_priv *priv,
- struct ieee80211_network *network)
+ struct libipw_network *network)
{
int ret = 0;
unsigned long flags;
- u32 size = sizeof(struct ieee80211_qos_parameters);
+ u32 size = sizeof(struct libipw_qos_parameters);
int set_qos_param = 0;
if ((priv == NULL) || (network == NULL) ||
@@ -7106,7 +7140,7 @@
spin_lock_irqsave(&priv->ieee->lock, flags);
if (network->flags & NETWORK_HAS_QOS_PARAMETERS) {
memcpy(&priv->assoc_network->qos_data, &network->qos_data,
- sizeof(struct ieee80211_qos_data));
+ sizeof(struct libipw_qos_data));
priv->assoc_network->qos_data.active = 1;
if ((network->qos_data.old_param_count !=
network->qos_data.param_count)) {
@@ -7142,7 +7176,7 @@
if ((priv == NULL))
return 0;
- if (!(priv->ieee->modulation & IEEE80211_OFDM_MODULATION))
+ if (!(priv->ieee->modulation & LIBIPW_OFDM_MODULATION))
ret = priv->qos_data.burst_duration_CCK;
else
ret = priv->qos_data.burst_duration_OFDM;
@@ -7194,8 +7228,8 @@
static int ipw_is_qos_active(struct net_device *dev,
struct sk_buff *skb)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- struct ieee80211_qos_data *qos_data = NULL;
+ struct ipw_priv *priv = libipw_priv(dev);
+ struct libipw_qos_data *qos_data = NULL;
int active, supported;
u8 *daddr = skb->data + ETH_ALEN;
int unicast = !is_multicast_ether_addr(daddr);
@@ -7250,9 +7284,6 @@
struct ipw_priv *priv =
container_of(work, struct ipw_priv, qos_activate);
- if (priv == NULL)
- return;
-
mutex_lock(&priv->mutex);
if (priv->status & STATUS_ASSOCIATED)
@@ -7262,10 +7293,10 @@
}
static int ipw_handle_probe_response(struct net_device *dev,
- struct ieee80211_probe_response *resp,
- struct ieee80211_network *network)
+ struct libipw_probe_response *resp,
+ struct libipw_network *network)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int active_network = ((priv->status & STATUS_ASSOCIATED) &&
(network == priv->assoc_network));
@@ -7275,10 +7306,10 @@
}
static int ipw_handle_beacon(struct net_device *dev,
- struct ieee80211_beacon *resp,
- struct ieee80211_network *network)
+ struct libipw_beacon *resp,
+ struct libipw_network *network)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int active_network = ((priv->status & STATUS_ASSOCIATED) &&
(network == priv->assoc_network));
@@ -7288,22 +7319,22 @@
}
static int ipw_handle_assoc_response(struct net_device *dev,
- struct ieee80211_assoc_response *resp,
- struct ieee80211_network *network)
+ struct libipw_assoc_response *resp,
+ struct libipw_network *network)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
ipw_qos_association_resp(priv, network);
return 0;
}
-static int ipw_send_qos_params_command(struct ipw_priv *priv, struct ieee80211_qos_parameters
+static int ipw_send_qos_params_command(struct ipw_priv *priv, struct libipw_qos_parameters
*qos_param)
{
return ipw_send_cmd_pdu(priv, IPW_CMD_QOS_PARAMETERS,
sizeof(*qos_param) * 3, qos_param);
}
-static int ipw_send_qos_info_command(struct ipw_priv *priv, struct ieee80211_qos_information_element
+static int ipw_send_qos_info_command(struct ipw_priv *priv, struct libipw_qos_information_element
*qos_param)
{
return ipw_send_cmd_pdu(priv, IPW_CMD_WME_INFO, sizeof(*qos_param),
@@ -7313,7 +7344,7 @@
#endif /* CONFIG_IPW2200_QOS */
static int ipw_associate_network(struct ipw_priv *priv,
- struct ieee80211_network *network,
+ struct libipw_network *network,
struct ipw_supported_rates *rates, int roaming)
{
int err;
@@ -7495,7 +7526,7 @@
static void ipw_roam(void *data)
{
struct ipw_priv *priv = data;
- struct ieee80211_network *network = NULL;
+ struct libipw_network *network = NULL;
struct ipw_network_match match = {
.network = priv->assoc_network
};
@@ -7570,7 +7601,7 @@
{
struct ipw_priv *priv = data;
- struct ieee80211_network *network = NULL;
+ struct libipw_network *network = NULL;
struct ipw_network_match match = {
.network = NULL
};
@@ -7624,8 +7655,8 @@
priv->config & CFG_STATIC_CHANNEL) {
/* Use oldest network if the free list is empty */
if (list_empty(&priv->ieee->network_free_list)) {
- struct ieee80211_network *oldest = NULL;
- struct ieee80211_network *target;
+ struct libipw_network *oldest = NULL;
+ struct libipw_network *target;
list_for_each_entry(target, &priv->ieee->network_list, list) {
if ((oldest == NULL) ||
@@ -7646,7 +7677,7 @@
}
element = priv->ieee->network_free_list.next;
- network = list_entry(element, struct ieee80211_network, list);
+ network = list_entry(element, struct libipw_network, list);
ipw_adhoc_create(priv, network);
rates = &priv->rates;
list_del(element);
@@ -7702,18 +7733,18 @@
switch (priv->ieee->sec.level) {
case SEC_LEVEL_3:
/* Remove CCMP HDR */
- memmove(skb->data + IEEE80211_3ADDR_LEN,
- skb->data + IEEE80211_3ADDR_LEN + 8,
- skb->len - IEEE80211_3ADDR_LEN - 8);
+ memmove(skb->data + LIBIPW_3ADDR_LEN,
+ skb->data + LIBIPW_3ADDR_LEN + 8,
+ skb->len - LIBIPW_3ADDR_LEN - 8);
skb_trim(skb, skb->len - 16); /* CCMP_HDR_LEN + CCMP_MIC_LEN */
break;
case SEC_LEVEL_2:
break;
case SEC_LEVEL_1:
/* Remove IV */
- memmove(skb->data + IEEE80211_3ADDR_LEN,
- skb->data + IEEE80211_3ADDR_LEN + 4,
- skb->len - IEEE80211_3ADDR_LEN - 4);
+ memmove(skb->data + LIBIPW_3ADDR_LEN,
+ skb->data + LIBIPW_3ADDR_LEN + 4,
+ skb->len - LIBIPW_3ADDR_LEN - 4);
skb_trim(skb, skb->len - 8); /* IV + ICV */
break;
case SEC_LEVEL_0:
@@ -7727,10 +7758,10 @@
static void ipw_handle_data_packet(struct ipw_priv *priv,
struct ipw_rx_mem_buffer *rxb,
- struct ieee80211_rx_stats *stats)
+ struct libipw_rx_stats *stats)
{
struct net_device *dev = priv->net_dev;
- struct ieee80211_hdr_4addr *hdr;
+ struct libipw_hdr_4addr *hdr;
struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)rxb->skb->data;
/* We received data from the HW, so stop the watchdog */
@@ -7760,15 +7791,15 @@
IPW_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len);
/* HW decrypt will not clear the WEP bit, MIC, PN, etc. */
- hdr = (struct ieee80211_hdr_4addr *)rxb->skb->data;
+ hdr = (struct libipw_hdr_4addr *)rxb->skb->data;
if (priv->ieee->iw_mode != IW_MODE_MONITOR &&
(is_multicast_ether_addr(hdr->addr1) ?
!priv->ieee->host_mc_decrypt : !priv->ieee->host_decrypt))
ipw_rebuild_decrypted_skb(priv, rxb->skb);
- if (!ieee80211_rx(priv->ieee, rxb->skb, stats))
+ if (!libipw_rx(priv->ieee, rxb->skb, stats))
dev->stats.rx_errors++;
- else { /* ieee80211_rx succeeded, so it now owns the SKB */
+ else { /* libipw_rx succeeded, so it now owns the SKB */
rxb->skb = NULL;
__ipw_led_activity_on(priv);
}
@@ -7777,7 +7808,7 @@
#ifdef CONFIG_IPW2200_RADIOTAP
static void ipw_handle_data_packet_monitor(struct ipw_priv *priv,
struct ipw_rx_mem_buffer *rxb,
- struct ieee80211_rx_stats *stats)
+ struct libipw_rx_stats *stats)
{
struct net_device *dev = priv->net_dev;
struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)rxb->skb->data;
@@ -7853,7 +7884,7 @@
/* Convert signal to DBM */
ipw_rt->rt_dbmsignal = antsignal;
- ipw_rt->rt_dbmnoise = frame->noise;
+ ipw_rt->rt_dbmnoise = (s8) le16_to_cpu(frame->noise);
/* Convert the channel data and set the flags */
ipw_rt->rt_channel = cpu_to_le16(ieee80211chan2mhz(received_channel));
@@ -7923,9 +7954,9 @@
IPW_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len);
- if (!ieee80211_rx(priv->ieee, rxb->skb, stats))
+ if (!libipw_rx(priv->ieee, rxb->skb, stats))
dev->stats.rx_errors++;
- else { /* ieee80211_rx succeeded, so it now owns the SKB */
+ else { /* libipw_rx succeeded, so it now owns the SKB */
rxb->skb = NULL;
/* no LED during capture */
}
@@ -7933,28 +7964,28 @@
#endif
#ifdef CONFIG_IPW2200_PROMISCUOUS
-#define ieee80211_is_probe_response(fc) \
+#define libipw_is_probe_response(fc) \
((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT && \
(fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP )
-#define ieee80211_is_management(fc) \
+#define libipw_is_management(fc) \
((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
-#define ieee80211_is_control(fc) \
+#define libipw_is_control(fc) \
((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL)
-#define ieee80211_is_data(fc) \
+#define libipw_is_data(fc) \
((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)
-#define ieee80211_is_assoc_request(fc) \
+#define libipw_is_assoc_request(fc) \
((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ)
-#define ieee80211_is_reassoc_request(fc) \
+#define libipw_is_reassoc_request(fc) \
((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ)
static void ipw_handle_promiscuous_rx(struct ipw_priv *priv,
struct ipw_rx_mem_buffer *rxb,
- struct ieee80211_rx_stats *stats)
+ struct libipw_rx_stats *stats)
{
struct net_device *dev = priv->prom_net_dev;
struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)rxb->skb->data;
@@ -7967,7 +7998,7 @@
u16 channel = frame->received_channel;
u8 phy_flags = frame->antennaAndPhy;
s8 signal = frame->rssi_dbm - IPW_RSSI_TO_DBM;
- s8 noise = frame->noise;
+ s8 noise = (s8) le16_to_cpu(frame->noise);
u8 rate = frame->rate;
short len = le16_to_cpu(pkt->u.frame.length);
struct sk_buff *skb;
@@ -8004,17 +8035,17 @@
}
hdr = (void *)rxb->skb->data + IPW_RX_FRAME_SIZE;
- if (ieee80211_is_management(le16_to_cpu(hdr->frame_control))) {
+ if (libipw_is_management(le16_to_cpu(hdr->frame_control))) {
if (filter & IPW_PROM_NO_MGMT)
return;
if (filter & IPW_PROM_MGMT_HEADER_ONLY)
hdr_only = 1;
- } else if (ieee80211_is_control(le16_to_cpu(hdr->frame_control))) {
+ } else if (libipw_is_control(le16_to_cpu(hdr->frame_control))) {
if (filter & IPW_PROM_NO_CTL)
return;
if (filter & IPW_PROM_CTL_HEADER_ONLY)
hdr_only = 1;
- } else if (ieee80211_is_data(le16_to_cpu(hdr->frame_control))) {
+ } else if (libipw_is_data(le16_to_cpu(hdr->frame_control))) {
if (filter & IPW_PROM_NO_DATA)
return;
if (filter & IPW_PROM_DATA_HEADER_ONLY)
@@ -8032,7 +8063,7 @@
ipw_rt = (void *)skb->data;
if (hdr_only)
- len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
+ len = libipw_get_hdrlen(le16_to_cpu(hdr->frame_control));
memcpy(ipw_rt->payload, hdr, len);
@@ -8129,7 +8160,7 @@
IPW_DEBUG_RX("Rx packet of %d bytes.\n", skb->len);
- if (!ieee80211_rx(priv->prom_priv->ieee, skb, stats)) {
+ if (!libipw_rx(priv->prom_priv->ieee, skb, stats)) {
dev->stats.rx_errors++;
dev_kfree_skb_any(skb);
}
@@ -8137,7 +8168,7 @@
#endif
static int is_network_packet(struct ipw_priv *priv,
- struct ieee80211_hdr_4addr *header)
+ struct libipw_hdr_4addr *header)
{
/* Filter incoming packets to determine if they are targetted toward
* this network, discarding packets coming from ourselves */
@@ -8175,7 +8206,7 @@
#define IPW_PACKET_RETRY_TIME HZ
static int is_duplicate_packet(struct ipw_priv *priv,
- struct ieee80211_hdr_4addr *header)
+ struct libipw_hdr_4addr *header)
{
u16 sc = le16_to_cpu(header->seq_ctl);
u16 seq = WLAN_GET_SEQ_SEQ(sc);
@@ -8249,14 +8280,14 @@
static void ipw_handle_mgmt_packet(struct ipw_priv *priv,
struct ipw_rx_mem_buffer *rxb,
- struct ieee80211_rx_stats *stats)
+ struct libipw_rx_stats *stats)
{
struct sk_buff *skb = rxb->skb;
struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)skb->data;
- struct ieee80211_hdr_4addr *header = (struct ieee80211_hdr_4addr *)
+ struct libipw_hdr_4addr *header = (struct libipw_hdr_4addr *)
(skb->data + IPW_RX_FRAME_SIZE);
- ieee80211_rx_mgt(priv->ieee, header, stats);
+ libipw_rx_mgt(priv->ieee, header, stats);
if (priv->ieee->iw_mode == IW_MODE_ADHOC &&
((WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl)) ==
@@ -8278,12 +8309,12 @@
/* Advance past the ipw packet header to the 802.11 frame */
skb_pull(skb, IPW_RX_FRAME_SIZE);
- /* Push the ieee80211_rx_stats before the 802.11 frame */
+ /* Push the libipw_rx_stats before the 802.11 frame */
memcpy(skb_push(skb, sizeof(*stats)), stats, sizeof(*stats));
skb->dev = priv->ieee->dev;
- /* Point raw at the ieee80211_stats */
+ /* Point raw at the libipw_stats */
skb_reset_mac_header(skb);
skb->pkt_type = PACKET_OTHERHOST;
@@ -8303,7 +8334,7 @@
{
struct ipw_rx_mem_buffer *rxb;
struct ipw_rx_packet *pkt;
- struct ieee80211_hdr_4addr *header;
+ struct libipw_hdr_4addr *header;
u32 r, w, i;
u8 network_packet;
u8 fill_rx = 0;
@@ -8334,11 +8365,11 @@
switch (pkt->header.message_type) {
case RX_FRAME_TYPE: /* 802.11 frame */ {
- struct ieee80211_rx_stats stats = {
+ struct libipw_rx_stats stats = {
.rssi = pkt->u.frame.rssi_dbm -
IPW_RSSI_TO_DBM,
.signal =
- le16_to_cpu(pkt->u.frame.rssi_dbm) -
+ pkt->u.frame.rssi_dbm -
IPW_RSSI_TO_DBM + 0x100,
.noise =
le16_to_cpu(pkt->u.frame.noise),
@@ -8349,19 +8380,19 @@
.freq =
(pkt->u.frame.
control & (1 << 0)) ?
- IEEE80211_24GHZ_BAND :
- IEEE80211_52GHZ_BAND,
+ LIBIPW_24GHZ_BAND :
+ LIBIPW_52GHZ_BAND,
.len = le16_to_cpu(pkt->u.frame.length),
};
if (stats.rssi != 0)
- stats.mask |= IEEE80211_STATMASK_RSSI;
+ stats.mask |= LIBIPW_STATMASK_RSSI;
if (stats.signal != 0)
- stats.mask |= IEEE80211_STATMASK_SIGNAL;
+ stats.mask |= LIBIPW_STATMASK_SIGNAL;
if (stats.noise != 0)
- stats.mask |= IEEE80211_STATMASK_NOISE;
+ stats.mask |= LIBIPW_STATMASK_NOISE;
if (stats.rate != 0)
- stats.mask |= IEEE80211_STATMASK_RATE;
+ stats.mask |= LIBIPW_STATMASK_RATE;
priv->rx_packets++;
@@ -8386,7 +8417,7 @@
#endif
header =
- (struct ieee80211_hdr_4addr *)(rxb->skb->
+ (struct libipw_hdr_4addr *)(rxb->skb->
data +
IPW_RX_FRAME_SIZE);
/* TODO: Check Ad-Hoc dest/source and make sure
@@ -8409,7 +8440,7 @@
le16_to_cpu(pkt->u.frame.length));
if (le16_to_cpu(pkt->u.frame.length) <
- ieee80211_get_hdrlen(le16_to_cpu(
+ libipw_get_hdrlen(le16_to_cpu(
header->frame_ctl))) {
IPW_DEBUG_DROP
("Received packet is too small. "
@@ -8520,7 +8551,7 @@
/* We default to disabling the LED code as right now it causes
* too many systems to lock up... */
- if (!led)
+ if (!led_support)
priv->config |= CFG_NO_LED;
if (associate)
@@ -8542,10 +8573,10 @@
IPW_DEBUG_INFO("Radio disabled.\n");
}
- if (channel != 0) {
+ if (default_channel != 0) {
priv->config |= CFG_STATIC_CHANNEL;
- priv->channel = channel;
- IPW_DEBUG_INFO("Bind to static channel %d\n", channel);
+ priv->channel = default_channel;
+ IPW_DEBUG_INFO("Bind to static channel %d\n", default_channel);
/* TODO: Validate that provided channel is in range */
}
#ifdef CONFIG_IPW2200_QOS
@@ -8553,7 +8584,7 @@
burst_duration_CCK, burst_duration_OFDM);
#endif /* CONFIG_IPW2200_QOS */
- switch (mode) {
+ switch (network_mode) {
case 1:
priv->ieee->iw_mode = IW_MODE_ADHOC;
priv->net_dev->type = ARPHRD_ETHER;
@@ -8594,9 +8625,9 @@
": Detected Intel PRO/Wireless 2915ABG Network "
"Connection\n");
priv->ieee->abg_true = 1;
- band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND;
- modulation = IEEE80211_OFDM_MODULATION |
- IEEE80211_CCK_MODULATION;
+ band = LIBIPW_52GHZ_BAND | LIBIPW_24GHZ_BAND;
+ modulation = LIBIPW_OFDM_MODULATION |
+ LIBIPW_CCK_MODULATION;
priv->adapter = IPW_2915ABG;
priv->ieee->mode = IEEE_A | IEEE_G | IEEE_B;
} else {
@@ -8606,9 +8637,9 @@
"Connection\n");
priv->ieee->abg_true = 0;
- band = IEEE80211_24GHZ_BAND;
- modulation = IEEE80211_OFDM_MODULATION |
- IEEE80211_CCK_MODULATION;
+ band = LIBIPW_24GHZ_BAND;
+ modulation = LIBIPW_OFDM_MODULATION |
+ LIBIPW_CCK_MODULATION;
priv->adapter = IPW_2200BG;
priv->ieee->mode = IEEE_G | IEEE_B;
}
@@ -8616,7 +8647,7 @@
priv->ieee->freq_band = band;
priv->ieee->modulation = modulation;
- priv->rates_mask = IEEE80211_DEFAULT_RATES_MASK;
+ priv->rates_mask = LIBIPW_DEFAULT_RATES_MASK;
priv->disassociate_threshold = IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT;
priv->roaming_threshold = IPW_MB_ROAMING_THRESHOLD_DEFAULT;
@@ -8642,24 +8673,6 @@
*
*/
-static int ipw_wx_get_name(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw_priv *priv = ieee80211_priv(dev);
- mutex_lock(&priv->mutex);
- if (priv->status & STATUS_RF_KILL_MASK)
- strcpy(wrqu->name, "radio off");
- else if (!(priv->status & STATUS_ASSOCIATED))
- strcpy(wrqu->name, "unassociated");
- else
- snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
- ipw_modes[priv->assoc_request.ieee_mode]);
- IPW_DEBUG_WX("Name: %s\n", wrqu->name);
- mutex_unlock(&priv->mutex);
- return 0;
-}
-
static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
{
if (channel == 0) {
@@ -8716,8 +8729,8 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- const struct ieee80211_geo *geo = ieee80211_get_geo(priv->ieee);
+ struct ipw_priv *priv = libipw_priv(dev);
+ const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
struct iw_freq *fwrq = &wrqu->freq;
int ret = 0, i;
u8 channel, flags;
@@ -8732,23 +8745,23 @@
}
/* if setting by freq convert to channel */
if (fwrq->e == 1) {
- channel = ieee80211_freq_to_channel(priv->ieee, fwrq->m);
+ channel = libipw_freq_to_channel(priv->ieee, fwrq->m);
if (channel == 0)
return -EINVAL;
} else
channel = fwrq->m;
- if (!(band = ieee80211_is_valid_channel(priv->ieee, channel)))
+ if (!(band = libipw_is_valid_channel(priv->ieee, channel)))
return -EINVAL;
if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
- i = ieee80211_channel_to_index(priv->ieee, channel);
+ i = libipw_channel_to_index(priv->ieee, channel);
if (i == -1)
return -EINVAL;
- flags = (band == IEEE80211_24GHZ_BAND) ?
+ flags = (band == LIBIPW_24GHZ_BAND) ?
geo->bg[i].flags : geo->a[i].flags;
- if (flags & IEEE80211_CH_PASSIVE_ONLY) {
+ if (flags & LIBIPW_CH_PASSIVE_ONLY) {
IPW_DEBUG_WX("Invalid Ad-Hoc channel for 802.11a\n");
return -EINVAL;
}
@@ -8765,7 +8778,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
wrqu->freq.e = 0;
@@ -8776,16 +8789,16 @@
priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) {
int i;
- i = ieee80211_channel_to_index(priv->ieee, priv->channel);
+ i = libipw_channel_to_index(priv->ieee, priv->channel);
BUG_ON(i == -1);
wrqu->freq.e = 1;
- switch (ieee80211_is_valid_channel(priv->ieee, priv->channel)) {
- case IEEE80211_52GHZ_BAND:
+ switch (libipw_is_valid_channel(priv->ieee, priv->channel)) {
+ case LIBIPW_52GHZ_BAND:
wrqu->freq.m = priv->ieee->geo.a[i].freq * 100000;
break;
- case IEEE80211_24GHZ_BAND:
+ case LIBIPW_24GHZ_BAND:
wrqu->freq.m = priv->ieee->geo.bg[i].freq * 100000;
break;
@@ -8804,7 +8817,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int err = 0;
IPW_DEBUG_WX("Set MODE: %d\n", wrqu->mode);
@@ -8856,7 +8869,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->mode = priv->ieee->iw_mode;
IPW_DEBUG_WX("Get MODE -> %d\n", wrqu->mode);
@@ -8885,9 +8898,9 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
struct iw_range *range = (struct iw_range *)extra;
- const struct ieee80211_geo *geo = ieee80211_get_geo(priv->ieee);
+ const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
int i = 0, j;
wrqu->data.length = sizeof(*range);
@@ -8931,7 +8944,7 @@
if (priv->ieee->mode & (IEEE_B | IEEE_G)) {
for (j = 0; j < geo->bg_channels && i < IW_MAX_FREQUENCIES; j++) {
if ((priv->ieee->iw_mode == IW_MODE_ADHOC) &&
- (geo->bg[j].flags & IEEE80211_CH_PASSIVE_ONLY))
+ (geo->bg[j].flags & LIBIPW_CH_PASSIVE_ONLY))
continue;
range->freq[i].i = geo->bg[j].channel;
@@ -8944,7 +8957,7 @@
if (priv->ieee->mode & IEEE_A) {
for (j = 0; j < geo->a_channels && i < IW_MAX_FREQUENCIES; j++) {
if ((priv->ieee->iw_mode == IW_MODE_ADHOC) &&
- (geo->a[j].flags & IEEE80211_CH_PASSIVE_ONLY))
+ (geo->a[j].flags & LIBIPW_CH_PASSIVE_ONLY))
continue;
range->freq[i].i = geo->a[j].channel;
@@ -8979,7 +8992,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
static const unsigned char any[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff
@@ -9028,7 +9041,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
/* If we are associated, trying to associate, or have a statically
* configured BSSID then return that; otherwise return ANY */
@@ -9050,7 +9063,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int length;
DECLARE_SSID_BUF(ssid);
@@ -9096,7 +9109,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
DECLARE_SSID_BUF(ssid);
/* If we are associated, trying to associate, or have a statically
@@ -9122,7 +9135,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
IPW_DEBUG_WX("Setting nick to '%s'\n", extra);
if (wrqu->data.length > IW_ESSID_MAX_SIZE)
@@ -9141,7 +9154,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
IPW_DEBUG_WX("Getting nick\n");
mutex_lock(&priv->mutex);
wrqu->data.length = strlen(priv->nick);
@@ -9155,7 +9168,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int err = 0;
IPW_DEBUG_WX("Setting roaming threshold to %d\n", wrqu->sens.value);
@@ -9185,7 +9198,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->sens.fixed = 1;
wrqu->sens.value = priv->roaming_threshold;
@@ -9202,7 +9215,7 @@
union iwreq_data *wrqu, char *extra)
{
/* TODO: We should use semaphores or locks for access to priv */
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
u32 target_rate = wrqu->bitrate.value;
u32 fixed, mask;
@@ -9212,7 +9225,7 @@
if (target_rate == -1) {
fixed = 0;
- mask = IEEE80211_DEFAULT_RATES_MASK;
+ mask = LIBIPW_DEFAULT_RATES_MASK;
/* Now we should reassociate */
goto apply;
}
@@ -9221,62 +9234,62 @@
fixed = wrqu->bitrate.fixed;
if (target_rate == 1000000 || !fixed)
- mask |= IEEE80211_CCK_RATE_1MB_MASK;
+ mask |= LIBIPW_CCK_RATE_1MB_MASK;
if (target_rate == 1000000)
goto apply;
if (target_rate == 2000000 || !fixed)
- mask |= IEEE80211_CCK_RATE_2MB_MASK;
+ mask |= LIBIPW_CCK_RATE_2MB_MASK;
if (target_rate == 2000000)
goto apply;
if (target_rate == 5500000 || !fixed)
- mask |= IEEE80211_CCK_RATE_5MB_MASK;
+ mask |= LIBIPW_CCK_RATE_5MB_MASK;
if (target_rate == 5500000)
goto apply;
if (target_rate == 6000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_6MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_6MB_MASK;
if (target_rate == 6000000)
goto apply;
if (target_rate == 9000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_9MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_9MB_MASK;
if (target_rate == 9000000)
goto apply;
if (target_rate == 11000000 || !fixed)
- mask |= IEEE80211_CCK_RATE_11MB_MASK;
+ mask |= LIBIPW_CCK_RATE_11MB_MASK;
if (target_rate == 11000000)
goto apply;
if (target_rate == 12000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_12MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_12MB_MASK;
if (target_rate == 12000000)
goto apply;
if (target_rate == 18000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_18MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_18MB_MASK;
if (target_rate == 18000000)
goto apply;
if (target_rate == 24000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_24MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_24MB_MASK;
if (target_rate == 24000000)
goto apply;
if (target_rate == 36000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_36MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_36MB_MASK;
if (target_rate == 36000000)
goto apply;
if (target_rate == 48000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_48MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_48MB_MASK;
if (target_rate == 48000000)
goto apply;
if (target_rate == 54000000 || !fixed)
- mask |= IEEE80211_OFDM_RATE_54MB_MASK;
+ mask |= LIBIPW_OFDM_RATE_54MB_MASK;
if (target_rate == 54000000)
goto apply;
@@ -9287,7 +9300,7 @@
IPW_DEBUG_WX("Setting rate mask to 0x%08X [%s]\n",
mask, fixed ? "fixed" : "sub-rates");
mutex_lock(&priv->mutex);
- if (mask == IEEE80211_DEFAULT_RATES_MASK) {
+ if (mask == LIBIPW_DEFAULT_RATES_MASK) {
priv->config &= ~CFG_FIXED_RATE;
ipw_set_fixed_rate(priv, priv->ieee->mode);
} else
@@ -9314,7 +9327,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->bitrate.value = priv->last_rate;
wrqu->bitrate.fixed = (priv->config & CFG_FIXED_RATE) ? 1 : 0;
@@ -9327,7 +9340,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
if (wrqu->rts.disabled || !wrqu->rts.fixed)
priv->rts_threshold = DEFAULT_RTS_THRESHOLD;
@@ -9350,7 +9363,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->rts.value = priv->rts_threshold;
wrqu->rts.fixed = 0; /* no auto select */
@@ -9364,7 +9377,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int err = 0;
mutex_lock(&priv->mutex);
@@ -9398,7 +9411,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->power.value = priv->tx_power;
wrqu->power.fixed = 1;
@@ -9416,7 +9429,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
if (wrqu->frag.disabled || !wrqu->frag.fixed)
priv->ieee->fts = DEFAULT_FTS;
@@ -9440,7 +9453,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->frag.value = priv->ieee->fts;
wrqu->frag.fixed = 0; /* no auto select */
@@ -9455,7 +9468,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
return -EINVAL;
@@ -9488,7 +9501,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
wrqu->retry.disabled = 0;
@@ -9519,7 +9532,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
struct iw_scan_req *req = (struct iw_scan_req *)extra;
struct delayed_work *work = NULL;
@@ -9555,20 +9568,20 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
+ struct ipw_priv *priv = libipw_priv(dev);
+ return libipw_wx_get_scan(priv->ieee, info, wrqu, extra);
}
static int ipw_wx_set_encode(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *key)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int ret;
u32 cap = priv->capability;
mutex_lock(&priv->mutex);
- ret = ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
+ ret = libipw_wx_set_encode(priv->ieee, info, wrqu, key);
/* In IBSS mode, we need to notify the firmware to update
* the beacon info after we changed the capability. */
@@ -9585,15 +9598,15 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *key)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
+ struct ipw_priv *priv = libipw_priv(dev);
+ return libipw_wx_get_encode(priv->ieee, info, wrqu, key);
}
static int ipw_wx_set_power(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int err;
mutex_lock(&priv->mutex);
if (wrqu->power.disabled) {
@@ -9644,7 +9657,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
if (!(priv->power_mode & IPW_POWER_ENABLED))
wrqu->power.disabled = 1;
@@ -9661,7 +9674,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int mode = *(int *)extra;
int err;
@@ -9687,7 +9700,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int level = IPW_POWER_LEVEL(priv->power_mode);
char *p = extra;
@@ -9719,7 +9732,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int mode = *(int *)extra;
u8 band = 0, modulation = 0;
@@ -9731,8 +9744,8 @@
if (priv->adapter == IPW_2915ABG) {
priv->ieee->abg_true = 1;
if (mode & IEEE_A) {
- band |= IEEE80211_52GHZ_BAND;
- modulation |= IEEE80211_OFDM_MODULATION;
+ band |= LIBIPW_52GHZ_BAND;
+ modulation |= LIBIPW_OFDM_MODULATION;
} else
priv->ieee->abg_true = 0;
} else {
@@ -9747,14 +9760,14 @@
}
if (mode & IEEE_B) {
- band |= IEEE80211_24GHZ_BAND;
- modulation |= IEEE80211_CCK_MODULATION;
+ band |= LIBIPW_24GHZ_BAND;
+ modulation |= LIBIPW_CCK_MODULATION;
} else
priv->ieee->abg_true = 0;
if (mode & IEEE_G) {
- band |= IEEE80211_24GHZ_BAND;
- modulation |= IEEE80211_OFDM_MODULATION;
+ band |= LIBIPW_24GHZ_BAND;
+ modulation |= LIBIPW_OFDM_MODULATION;
} else
priv->ieee->abg_true = 0;
@@ -9784,7 +9797,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
switch (priv->ieee->mode) {
case IEEE_A:
@@ -9825,7 +9838,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int mode = *(int *)extra;
mutex_lock(&priv->mutex);
/* Switching from SHORT -> LONG requires a disassociation */
@@ -9858,7 +9871,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
mutex_lock(&priv->mutex);
if (priv->config & CFG_PREAMBLE_LONG)
snprintf(wrqu->name, IFNAMSIZ, "long (1)");
@@ -9873,7 +9886,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int *parms = (int *)extra;
int enable = (parms[0] > 0);
mutex_lock(&priv->mutex);
@@ -9907,7 +9920,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
IPW_DEBUG_WX("RESET\n");
queue_work(priv->workqueue, &priv->adapter_restart);
return 0;
@@ -9917,7 +9930,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
union iwreq_data wrqu_sec = {
.encoding = {
.flags = IW_ENCODE_DISABLED,
@@ -9940,7 +9953,7 @@
ipw_radio_kill_sw(priv, priv->status & STATUS_RF_KILL_SW);
mutex_unlock(&priv->mutex);
- ieee80211_wx_set_encode(priv->ieee, info, &wrqu_sec, NULL);
+ libipw_wx_set_encode(priv->ieee, info, &wrqu_sec, NULL);
mutex_lock(&priv->mutex);
if (!(priv->status & STATUS_RF_KILL_MASK)) {
@@ -9959,7 +9972,7 @@
/* Rebase the WE IOCTLs to zero for the handler array */
#define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
static iw_handler ipw_wx_handlers[] = {
- IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
+ IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
@@ -10085,7 +10098,7 @@
*/
static struct iw_statistics *ipw_get_wireless_stats(struct net_device *dev)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
struct iw_statistics *wstats;
wstats = &priv->wstats;
@@ -10166,13 +10179,13 @@
todo:
modify to send one tfd per fragment instead of using chunking. otherwise
-we need to heavily modify the ieee80211_skb_to_txb.
+we need to heavily modify the libipw_skb_to_txb.
*/
-static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb,
+static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb,
int pri)
{
- struct ieee80211_hdr_3addrqos *hdr = (struct ieee80211_hdr_3addrqos *)
+ struct libipw_hdr_3addrqos *hdr = (struct libipw_hdr_3addrqos *)
txb->fragments[0]->data;
int i = 0;
struct tfd_frame *tfd;
@@ -10184,13 +10197,12 @@
#endif
struct clx2_queue *q = &txq->q;
u8 id, hdr_len, unicast;
- u16 remaining_bytes;
int fc;
if (!(priv->status & STATUS_ASSOCIATED))
goto drop;
- hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+ hdr_len = libipw_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
switch (priv->ieee->iw_mode) {
case IW_MODE_ADHOC:
unicast = !is_multicast_ether_addr(hdr->addr1);
@@ -10223,7 +10235,6 @@
tfd->u.data.cmd_id = DINO_CMD_TX;
tfd->u.data.len = cpu_to_le16(txb->payload_size);
- remaining_bytes = txb->payload_size;
if (priv->assoc_request.ieee_mode == IPW_B_MODE)
tfd->u.data.tx_flags_ext |= DCT_FLAG_EXT_MODE_CCK;
@@ -10360,13 +10371,13 @@
drop:
IPW_DEBUG_DROP("Silently dropping Tx packet.\n");
- ieee80211_txb_free(txb);
+ libipw_txb_free(txb);
return NETDEV_TX_OK;
}
static int ipw_net_is_queue_full(struct net_device *dev, int pri)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
#ifdef CONFIG_IPW2200_QOS
int tx_id = ipw_get_tx_queue_number(priv, pri);
struct clx2_tx_queue *txq = &priv->txq[tx_id];
@@ -10382,9 +10393,9 @@
#ifdef CONFIG_IPW2200_PROMISCUOUS
static void ipw_handle_promiscuous_tx(struct ipw_priv *priv,
- struct ieee80211_txb *txb)
+ struct libipw_txb *txb)
{
- struct ieee80211_rx_stats dummystats;
+ struct libipw_rx_stats dummystats;
struct ieee80211_hdr *hdr;
u8 n;
u16 filter = priv->prom_priv->filter;
@@ -10397,17 +10408,17 @@
/* Filtering of fragment chains is done agains the first fragment */
hdr = (void *)txb->fragments[0]->data;
- if (ieee80211_is_management(le16_to_cpu(hdr->frame_control))) {
+ if (libipw_is_management(le16_to_cpu(hdr->frame_control))) {
if (filter & IPW_PROM_NO_MGMT)
return;
if (filter & IPW_PROM_MGMT_HEADER_ONLY)
hdr_only = 1;
- } else if (ieee80211_is_control(le16_to_cpu(hdr->frame_control))) {
+ } else if (libipw_is_control(le16_to_cpu(hdr->frame_control))) {
if (filter & IPW_PROM_NO_CTL)
return;
if (filter & IPW_PROM_CTL_HEADER_ONLY)
hdr_only = 1;
- } else if (ieee80211_is_data(le16_to_cpu(hdr->frame_control))) {
+ } else if (libipw_is_data(le16_to_cpu(hdr->frame_control))) {
if (filter & IPW_PROM_NO_DATA)
return;
if (filter & IPW_PROM_DATA_HEADER_ONLY)
@@ -10422,7 +10433,7 @@
if (hdr_only) {
hdr = (void *)src->data;
- len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
+ len = libipw_get_hdrlen(le16_to_cpu(hdr->frame_control));
} else
len = src->len;
@@ -10456,18 +10467,18 @@
skb_copy_from_linear_data(src, skb_put(dst, len), len);
- if (!ieee80211_rx(priv->prom_priv->ieee, dst, &dummystats))
+ if (!libipw_rx(priv->prom_priv->ieee, dst, &dummystats))
dev_kfree_skb_any(dst);
}
}
#endif
-static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb,
- struct net_device *dev, int pri)
+static netdev_tx_t ipw_net_hard_start_xmit(struct libipw_txb *txb,
+ struct net_device *dev, int pri)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
unsigned long flags;
- int ret;
+ netdev_tx_t ret;
IPW_DEBUG_TX("dev->xmit(%d bytes)\n", txb->payload_size);
spin_lock_irqsave(&priv->lock, flags);
@@ -10492,7 +10503,7 @@
static int ipw_net_set_mac_address(struct net_device *dev, void *p)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
@@ -10510,7 +10521,7 @@
static void ipw_ethtool_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct ipw_priv *p = ieee80211_priv(dev);
+ struct ipw_priv *p = libipw_priv(dev);
char vers[64];
char date[32];
u32 len;
@@ -10531,7 +10542,7 @@
static u32 ipw_ethtool_get_link(struct net_device *dev)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
return (priv->status & STATUS_ASSOCIATED) != 0;
}
@@ -10543,7 +10554,7 @@
static int ipw_ethtool_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * bytes)
{
- struct ipw_priv *p = ieee80211_priv(dev);
+ struct ipw_priv *p = libipw_priv(dev);
if (eeprom->offset + eeprom->len > IPW_EEPROM_IMAGE_SIZE)
return -EINVAL;
@@ -10556,7 +10567,7 @@
static int ipw_ethtool_set_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * bytes)
{
- struct ipw_priv *p = ieee80211_priv(dev);
+ struct ipw_priv *p = libipw_priv(dev);
int i;
if (eeprom->offset + eeprom->len > IPW_EEPROM_IMAGE_SIZE)
@@ -10772,9 +10783,9 @@
}
static void shim__set_security(struct net_device *dev,
- struct ieee80211_security *sec)
+ struct libipw_security *sec)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_priv *priv = libipw_priv(dev);
int i;
for (i = 0; i < 4; i++) {
if (sec->flags & (1 << i)) {
@@ -10859,21 +10870,21 @@
memset(rates, 0, sizeof(*rates));
/* configure supported rates */
switch (priv->ieee->freq_band) {
- case IEEE80211_52GHZ_BAND:
+ case LIBIPW_52GHZ_BAND:
rates->ieee_mode = IPW_A_MODE;
rates->purpose = IPW_RATE_CAPABILITIES;
- ipw_add_ofdm_scan_rates(rates, IEEE80211_CCK_MODULATION,
- IEEE80211_OFDM_DEFAULT_RATES_MASK);
+ ipw_add_ofdm_scan_rates(rates, LIBIPW_CCK_MODULATION,
+ LIBIPW_OFDM_DEFAULT_RATES_MASK);
break;
default: /* Mixed or 2.4Ghz */
rates->ieee_mode = IPW_G_MODE;
rates->purpose = IPW_RATE_CAPABILITIES;
- ipw_add_cck_scan_rates(rates, IEEE80211_CCK_MODULATION,
- IEEE80211_CCK_DEFAULT_RATES_MASK);
- if (priv->ieee->modulation & IEEE80211_OFDM_MODULATION) {
- ipw_add_ofdm_scan_rates(rates, IEEE80211_CCK_MODULATION,
- IEEE80211_OFDM_DEFAULT_RATES_MASK);
+ ipw_add_cck_scan_rates(rates, LIBIPW_CCK_MODULATION,
+ LIBIPW_CCK_DEFAULT_RATES_MASK);
+ if (priv->ieee->modulation & LIBIPW_OFDM_MODULATION) {
+ ipw_add_ofdm_scan_rates(rates, LIBIPW_CCK_MODULATION,
+ LIBIPW_OFDM_DEFAULT_RATES_MASK);
}
break;
}
@@ -10979,7 +10990,7 @@
* table.
*
*/
-static const struct ieee80211_geo ipw_geos[] = {
+static const struct libipw_geo ipw_geos[] = {
{ /* Restricted */
"---",
.bg_channels = 11,
@@ -11001,10 +11012,10 @@
{5200, 40},
{5220, 44},
{5240, 48},
- {5260, 52, IEEE80211_CH_PASSIVE_ONLY},
- {5280, 56, IEEE80211_CH_PASSIVE_ONLY},
- {5300, 60, IEEE80211_CH_PASSIVE_ONLY},
- {5320, 64, IEEE80211_CH_PASSIVE_ONLY}},
+ {5260, 52, LIBIPW_CH_PASSIVE_ONLY},
+ {5280, 56, LIBIPW_CH_PASSIVE_ONLY},
+ {5300, 60, LIBIPW_CH_PASSIVE_ONLY},
+ {5320, 64, LIBIPW_CH_PASSIVE_ONLY}},
},
{ /* Rest of World */
@@ -11029,10 +11040,10 @@
{5200, 40},
{5220, 44},
{5240, 48},
- {5260, 52, IEEE80211_CH_PASSIVE_ONLY},
- {5280, 56, IEEE80211_CH_PASSIVE_ONLY},
- {5300, 60, IEEE80211_CH_PASSIVE_ONLY},
- {5320, 64, IEEE80211_CH_PASSIVE_ONLY},
+ {5260, 52, LIBIPW_CH_PASSIVE_ONLY},
+ {5280, 56, LIBIPW_CH_PASSIVE_ONLY},
+ {5300, 60, LIBIPW_CH_PASSIVE_ONLY},
+ {5320, 64, LIBIPW_CH_PASSIVE_ONLY},
{5745, 149},
{5765, 153},
{5785, 157},
@@ -11052,15 +11063,15 @@
{5200, 40},
{5220, 44},
{5240, 48},
- {5260, 52, IEEE80211_CH_PASSIVE_ONLY},
- {5280, 56, IEEE80211_CH_PASSIVE_ONLY},
- {5300, 60, IEEE80211_CH_PASSIVE_ONLY},
- {5320, 64, IEEE80211_CH_PASSIVE_ONLY},
- {5745, 149, IEEE80211_CH_PASSIVE_ONLY},
- {5765, 153, IEEE80211_CH_PASSIVE_ONLY},
- {5785, 157, IEEE80211_CH_PASSIVE_ONLY},
- {5805, 161, IEEE80211_CH_PASSIVE_ONLY},
- {5825, 165, IEEE80211_CH_PASSIVE_ONLY}},
+ {5260, 52, LIBIPW_CH_PASSIVE_ONLY},
+ {5280, 56, LIBIPW_CH_PASSIVE_ONLY},
+ {5300, 60, LIBIPW_CH_PASSIVE_ONLY},
+ {5320, 64, LIBIPW_CH_PASSIVE_ONLY},
+ {5745, 149, LIBIPW_CH_PASSIVE_ONLY},
+ {5765, 153, LIBIPW_CH_PASSIVE_ONLY},
+ {5785, 157, LIBIPW_CH_PASSIVE_ONLY},
+ {5805, 161, LIBIPW_CH_PASSIVE_ONLY},
+ {5825, 165, LIBIPW_CH_PASSIVE_ONLY}},
},
{ /* Custom Japan */
@@ -11097,21 +11108,21 @@
{5200, 40},
{5220, 44},
{5240, 48},
- {5260, 52, IEEE80211_CH_PASSIVE_ONLY},
- {5280, 56, IEEE80211_CH_PASSIVE_ONLY},
- {5300, 60, IEEE80211_CH_PASSIVE_ONLY},
- {5320, 64, IEEE80211_CH_PASSIVE_ONLY},
- {5500, 100, IEEE80211_CH_PASSIVE_ONLY},
- {5520, 104, IEEE80211_CH_PASSIVE_ONLY},
- {5540, 108, IEEE80211_CH_PASSIVE_ONLY},
- {5560, 112, IEEE80211_CH_PASSIVE_ONLY},
- {5580, 116, IEEE80211_CH_PASSIVE_ONLY},
- {5600, 120, IEEE80211_CH_PASSIVE_ONLY},
- {5620, 124, IEEE80211_CH_PASSIVE_ONLY},
- {5640, 128, IEEE80211_CH_PASSIVE_ONLY},
- {5660, 132, IEEE80211_CH_PASSIVE_ONLY},
- {5680, 136, IEEE80211_CH_PASSIVE_ONLY},
- {5700, 140, IEEE80211_CH_PASSIVE_ONLY}},
+ {5260, 52, LIBIPW_CH_PASSIVE_ONLY},
+ {5280, 56, LIBIPW_CH_PASSIVE_ONLY},
+ {5300, 60, LIBIPW_CH_PASSIVE_ONLY},
+ {5320, 64, LIBIPW_CH_PASSIVE_ONLY},
+ {5500, 100, LIBIPW_CH_PASSIVE_ONLY},
+ {5520, 104, LIBIPW_CH_PASSIVE_ONLY},
+ {5540, 108, LIBIPW_CH_PASSIVE_ONLY},
+ {5560, 112, LIBIPW_CH_PASSIVE_ONLY},
+ {5580, 116, LIBIPW_CH_PASSIVE_ONLY},
+ {5600, 120, LIBIPW_CH_PASSIVE_ONLY},
+ {5620, 124, LIBIPW_CH_PASSIVE_ONLY},
+ {5640, 128, LIBIPW_CH_PASSIVE_ONLY},
+ {5660, 132, LIBIPW_CH_PASSIVE_ONLY},
+ {5680, 136, LIBIPW_CH_PASSIVE_ONLY},
+ {5700, 140, LIBIPW_CH_PASSIVE_ONLY}},
},
{ /* Custom Japan */
@@ -11121,7 +11132,7 @@
{2427, 4}, {2432, 5}, {2437, 6},
{2442, 7}, {2447, 8}, {2452, 9},
{2457, 10}, {2462, 11}, {2467, 12},
- {2472, 13}, {2484, 14, IEEE80211_CH_B_ONLY}},
+ {2472, 13}, {2484, 14, LIBIPW_CH_B_ONLY}},
.a_channels = 4,
.a = {{5170, 34}, {5190, 38},
{5210, 42}, {5230, 46}},
@@ -11134,8 +11145,8 @@
{2427, 4}, {2432, 5}, {2437, 6},
{2442, 7}, {2447, 8}, {2452, 9},
{2457, 10}, {2462, 11}, {2467, 12},
- {2472, 13}, {2484, 14, IEEE80211_CH_B_ONLY |
- IEEE80211_CH_PASSIVE_ONLY}},
+ {2472, 13}, {2484, 14, LIBIPW_CH_B_ONLY |
+ LIBIPW_CH_PASSIVE_ONLY}},
},
{ /* High Band */
@@ -11145,8 +11156,8 @@
{2427, 4}, {2432, 5}, {2437, 6},
{2442, 7}, {2447, 8}, {2452, 9},
{2457, 10}, {2462, 11},
- {2467, 12, IEEE80211_CH_PASSIVE_ONLY},
- {2472, 13, IEEE80211_CH_PASSIVE_ONLY}},
+ {2467, 12, LIBIPW_CH_PASSIVE_ONLY},
+ {2472, 13, LIBIPW_CH_PASSIVE_ONLY}},
.a_channels = 4,
.a = {{5745, 149}, {5765, 153},
{5785, 157}, {5805, 161}},
@@ -11172,33 +11183,33 @@
{2427, 4}, {2432, 5}, {2437, 6},
{2442, 7}, {2447, 8}, {2452, 9},
{2457, 10}, {2462, 11},
- {2467, 12, IEEE80211_CH_PASSIVE_ONLY},
- {2472, 13, IEEE80211_CH_PASSIVE_ONLY}},
+ {2467, 12, LIBIPW_CH_PASSIVE_ONLY},
+ {2472, 13, LIBIPW_CH_PASSIVE_ONLY}},
.a_channels = 24,
- .a = {{5180, 36, IEEE80211_CH_PASSIVE_ONLY},
- {5200, 40, IEEE80211_CH_PASSIVE_ONLY},
- {5220, 44, IEEE80211_CH_PASSIVE_ONLY},
- {5240, 48, IEEE80211_CH_PASSIVE_ONLY},
- {5260, 52, IEEE80211_CH_PASSIVE_ONLY},
- {5280, 56, IEEE80211_CH_PASSIVE_ONLY},
- {5300, 60, IEEE80211_CH_PASSIVE_ONLY},
- {5320, 64, IEEE80211_CH_PASSIVE_ONLY},
- {5500, 100, IEEE80211_CH_PASSIVE_ONLY},
- {5520, 104, IEEE80211_CH_PASSIVE_ONLY},
- {5540, 108, IEEE80211_CH_PASSIVE_ONLY},
- {5560, 112, IEEE80211_CH_PASSIVE_ONLY},
- {5580, 116, IEEE80211_CH_PASSIVE_ONLY},
- {5600, 120, IEEE80211_CH_PASSIVE_ONLY},
- {5620, 124, IEEE80211_CH_PASSIVE_ONLY},
- {5640, 128, IEEE80211_CH_PASSIVE_ONLY},
- {5660, 132, IEEE80211_CH_PASSIVE_ONLY},
- {5680, 136, IEEE80211_CH_PASSIVE_ONLY},
- {5700, 140, IEEE80211_CH_PASSIVE_ONLY},
- {5745, 149, IEEE80211_CH_PASSIVE_ONLY},
- {5765, 153, IEEE80211_CH_PASSIVE_ONLY},
- {5785, 157, IEEE80211_CH_PASSIVE_ONLY},
- {5805, 161, IEEE80211_CH_PASSIVE_ONLY},
- {5825, 165, IEEE80211_CH_PASSIVE_ONLY}},
+ .a = {{5180, 36, LIBIPW_CH_PASSIVE_ONLY},
+ {5200, 40, LIBIPW_CH_PASSIVE_ONLY},
+ {5220, 44, LIBIPW_CH_PASSIVE_ONLY},
+ {5240, 48, LIBIPW_CH_PASSIVE_ONLY},
+ {5260, 52, LIBIPW_CH_PASSIVE_ONLY},
+ {5280, 56, LIBIPW_CH_PASSIVE_ONLY},
+ {5300, 60, LIBIPW_CH_PASSIVE_ONLY},
+ {5320, 64, LIBIPW_CH_PASSIVE_ONLY},
+ {5500, 100, LIBIPW_CH_PASSIVE_ONLY},
+ {5520, 104, LIBIPW_CH_PASSIVE_ONLY},
+ {5540, 108, LIBIPW_CH_PASSIVE_ONLY},
+ {5560, 112, LIBIPW_CH_PASSIVE_ONLY},
+ {5580, 116, LIBIPW_CH_PASSIVE_ONLY},
+ {5600, 120, LIBIPW_CH_PASSIVE_ONLY},
+ {5620, 124, LIBIPW_CH_PASSIVE_ONLY},
+ {5640, 128, LIBIPW_CH_PASSIVE_ONLY},
+ {5660, 132, LIBIPW_CH_PASSIVE_ONLY},
+ {5680, 136, LIBIPW_CH_PASSIVE_ONLY},
+ {5700, 140, LIBIPW_CH_PASSIVE_ONLY},
+ {5745, 149, LIBIPW_CH_PASSIVE_ONLY},
+ {5765, 153, LIBIPW_CH_PASSIVE_ONLY},
+ {5785, 157, LIBIPW_CH_PASSIVE_ONLY},
+ {5805, 161, LIBIPW_CH_PASSIVE_ONLY},
+ {5825, 165, LIBIPW_CH_PASSIVE_ONLY}},
},
{ /* Europe */
@@ -11209,19 +11220,19 @@
{2442, 7}, {2447, 8}, {2452, 9},
{2457, 10}, {2462, 11}},
.a_channels = 13,
- .a = {{5180, 36, IEEE80211_CH_PASSIVE_ONLY},
- {5200, 40, IEEE80211_CH_PASSIVE_ONLY},
- {5220, 44, IEEE80211_CH_PASSIVE_ONLY},
- {5240, 48, IEEE80211_CH_PASSIVE_ONLY},
- {5260, 52, IEEE80211_CH_PASSIVE_ONLY},
- {5280, 56, IEEE80211_CH_PASSIVE_ONLY},
- {5300, 60, IEEE80211_CH_PASSIVE_ONLY},
- {5320, 64, IEEE80211_CH_PASSIVE_ONLY},
- {5745, 149, IEEE80211_CH_PASSIVE_ONLY},
- {5765, 153, IEEE80211_CH_PASSIVE_ONLY},
- {5785, 157, IEEE80211_CH_PASSIVE_ONLY},
- {5805, 161, IEEE80211_CH_PASSIVE_ONLY},
- {5825, 165, IEEE80211_CH_PASSIVE_ONLY}},
+ .a = {{5180, 36, LIBIPW_CH_PASSIVE_ONLY},
+ {5200, 40, LIBIPW_CH_PASSIVE_ONLY},
+ {5220, 44, LIBIPW_CH_PASSIVE_ONLY},
+ {5240, 48, LIBIPW_CH_PASSIVE_ONLY},
+ {5260, 52, LIBIPW_CH_PASSIVE_ONLY},
+ {5280, 56, LIBIPW_CH_PASSIVE_ONLY},
+ {5300, 60, LIBIPW_CH_PASSIVE_ONLY},
+ {5320, 64, LIBIPW_CH_PASSIVE_ONLY},
+ {5745, 149, LIBIPW_CH_PASSIVE_ONLY},
+ {5765, 153, LIBIPW_CH_PASSIVE_ONLY},
+ {5785, 157, LIBIPW_CH_PASSIVE_ONLY},
+ {5805, 161, LIBIPW_CH_PASSIVE_ONLY},
+ {5825, 165, LIBIPW_CH_PASSIVE_ONLY}},
}
};
@@ -11232,7 +11243,7 @@
/* Age scan list entries found before suspend */
if (priv->suspend_time) {
- ieee80211_networks_age(priv->ieee, priv->suspend_time);
+ libipw_networks_age(priv->ieee, priv->suspend_time);
priv->suspend_time = 0;
}
@@ -11277,7 +11288,7 @@
priv->eeprom[EEPROM_COUNTRY_CODE + 2]);
j = 0;
}
- if (ieee80211_set_geo(priv->ieee, &ipw_geos[j])) {
+ if (libipw_set_geo(priv->ieee, &ipw_geos[j])) {
IPW_WARNING("Could not set geography.");
return 0;
}
@@ -11405,16 +11416,100 @@
/* Called by register_netdev() */
static int ipw_net_init(struct net_device *dev)
{
- struct ipw_priv *priv = ieee80211_priv(dev);
+ int i, rc = 0;
+ struct ipw_priv *priv = libipw_priv(dev);
+ const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
+ struct wireless_dev *wdev = &priv->ieee->wdev;
mutex_lock(&priv->mutex);
if (ipw_up(priv)) {
- mutex_unlock(&priv->mutex);
- return -EIO;
+ rc = -EIO;
+ goto out;
}
+ memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
+
+ /* fill-out priv->ieee->bg_band */
+ if (geo->bg_channels) {
+ struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
+
+ bg_band->band = IEEE80211_BAND_2GHZ;
+ bg_band->n_channels = geo->bg_channels;
+ bg_band->channels =
+ kzalloc(geo->bg_channels *
+ sizeof(struct ieee80211_channel), GFP_KERNEL);
+ /* translate geo->bg to bg_band.channels */
+ for (i = 0; i < geo->bg_channels; i++) {
+ bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
+ bg_band->channels[i].center_freq = geo->bg[i].freq;
+ bg_band->channels[i].hw_value = geo->bg[i].channel;
+ bg_band->channels[i].max_power = geo->bg[i].max_power;
+ if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
+ bg_band->channels[i].flags |=
+ IEEE80211_CHAN_PASSIVE_SCAN;
+ if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
+ bg_band->channels[i].flags |=
+ IEEE80211_CHAN_NO_IBSS;
+ if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
+ bg_band->channels[i].flags |=
+ IEEE80211_CHAN_RADAR;
+ /* No equivalent for LIBIPW_CH_80211H_RULES,
+ LIBIPW_CH_UNIFORM_SPREADING, or
+ LIBIPW_CH_B_ONLY... */
+ }
+ /* point at bitrate info */
+ bg_band->bitrates = ipw2200_bg_rates;
+ bg_band->n_bitrates = ipw2200_num_bg_rates;
+
+ wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
+ }
+
+ /* fill-out priv->ieee->a_band */
+ if (geo->a_channels) {
+ struct ieee80211_supported_band *a_band = &priv->ieee->a_band;
+
+ a_band->band = IEEE80211_BAND_5GHZ;
+ a_band->n_channels = geo->a_channels;
+ a_band->channels =
+ kzalloc(geo->a_channels *
+ sizeof(struct ieee80211_channel), GFP_KERNEL);
+ /* translate geo->bg to a_band.channels */
+ for (i = 0; i < geo->a_channels; i++) {
+ a_band->channels[i].band = IEEE80211_BAND_2GHZ;
+ a_band->channels[i].center_freq = geo->a[i].freq;
+ a_band->channels[i].hw_value = geo->a[i].channel;
+ a_band->channels[i].max_power = geo->a[i].max_power;
+ if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
+ a_band->channels[i].flags |=
+ IEEE80211_CHAN_PASSIVE_SCAN;
+ if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
+ a_band->channels[i].flags |=
+ IEEE80211_CHAN_NO_IBSS;
+ if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
+ a_band->channels[i].flags |=
+ IEEE80211_CHAN_RADAR;
+ /* No equivalent for LIBIPW_CH_80211H_RULES,
+ LIBIPW_CH_UNIFORM_SPREADING, or
+ LIBIPW_CH_B_ONLY... */
+ }
+ /* point at bitrate info */
+ a_band->bitrates = ipw2200_a_rates;
+ a_band->n_bitrates = ipw2200_num_a_rates;
+
+ wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band;
+ }
+
+ set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
+
+ /* With that information in place, we can now register the wiphy... */
+ if (wiphy_register(wdev->wiphy)) {
+ rc = -EIO;
+ goto out;
+ }
+
+out:
mutex_unlock(&priv->mutex);
- return 0;
+ return rc;
}
/* PCI driver stuff */
@@ -11436,11 +11531,11 @@
{PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2754, 0, 0, 0},
{PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2761, 0, 0, 0},
{PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2762, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, 0x104f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, 0x4220, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* BG */
- {PCI_VENDOR_ID_INTEL, 0x4221, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* BG */
- {PCI_VENDOR_ID_INTEL, 0x4223, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* ABG */
- {PCI_VENDOR_ID_INTEL, 0x4224, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* ABG */
+ {PCI_VDEVICE(INTEL, 0x104f), 0},
+ {PCI_VDEVICE(INTEL, 0x4220), 0}, /* BG */
+ {PCI_VDEVICE(INTEL, 0x4221), 0}, /* BG */
+ {PCI_VDEVICE(INTEL, 0x4223), 0}, /* ABG */
+ {PCI_VDEVICE(INTEL, 0x4224), 0}, /* ABG */
/* required last entry */
{0,}
@@ -11484,7 +11579,7 @@
#ifdef CONFIG_IPW2200_PROMISCUOUS
static int ipw_prom_open(struct net_device *dev)
{
- struct ipw_prom_priv *prom_priv = ieee80211_priv(dev);
+ struct ipw_prom_priv *prom_priv = libipw_priv(dev);
struct ipw_priv *priv = prom_priv->priv;
IPW_DEBUG_INFO("prom dev->open\n");
@@ -11504,7 +11599,7 @@
static int ipw_prom_stop(struct net_device *dev)
{
- struct ipw_prom_priv *prom_priv = ieee80211_priv(dev);
+ struct ipw_prom_priv *prom_priv = libipw_priv(dev);
struct ipw_priv *priv = prom_priv->priv;
IPW_DEBUG_INFO("prom dev->stop\n");
@@ -11521,7 +11616,8 @@
return 0;
}
-static int ipw_prom_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ipw_prom_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
IPW_DEBUG_INFO("prom dev->xmit\n");
dev_kfree_skb(skb);
@@ -11532,7 +11628,7 @@
.ndo_open = ipw_prom_open,
.ndo_stop = ipw_prom_stop,
.ndo_start_xmit = ipw_prom_hard_start_xmit,
- .ndo_change_mtu = ieee80211_change_mtu,
+ .ndo_change_mtu = libipw_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
@@ -11544,11 +11640,11 @@
if (priv->prom_net_dev)
return -EPERM;
- priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv));
+ priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1);
if (priv->prom_net_dev == NULL)
return -ENOMEM;
- priv->prom_priv = ieee80211_priv(priv->prom_net_dev);
+ priv->prom_priv = libipw_priv(priv->prom_net_dev);
priv->prom_priv->ieee = netdev_priv(priv->prom_net_dev);
priv->prom_priv->priv = priv;
@@ -11563,7 +11659,7 @@
rc = register_netdev(priv->prom_net_dev);
if (rc) {
- free_ieee80211(priv->prom_net_dev);
+ free_ieee80211(priv->prom_net_dev, 1);
priv->prom_net_dev = NULL;
return rc;
}
@@ -11577,7 +11673,7 @@
return;
unregister_netdev(priv->prom_net_dev);
- free_ieee80211(priv->prom_net_dev);
+ free_ieee80211(priv->prom_net_dev, 1);
priv->prom_net_dev = NULL;
}
@@ -11590,8 +11686,8 @@
.ndo_stop = ipw_net_stop,
.ndo_set_multicast_list = ipw_net_set_multicast_list,
.ndo_set_mac_address = ipw_net_set_mac_address,
- .ndo_start_xmit = ieee80211_xmit,
- .ndo_change_mtu = ieee80211_change_mtu,
+ .ndo_start_xmit = libipw_xmit,
+ .ndo_change_mtu = libipw_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
@@ -11605,13 +11701,13 @@
struct ipw_priv *priv;
int i;
- net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
+ net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0);
if (net_dev == NULL) {
err = -ENOMEM;
goto out;
}
- priv = ieee80211_priv(net_dev);
+ priv = libipw_priv(net_dev);
priv->ieee = netdev_priv(net_dev);
priv->net_dev = net_dev;
@@ -11753,7 +11849,7 @@
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
out_free_ieee80211:
- free_ieee80211(priv->net_dev);
+ free_ieee80211(priv->net_dev, 0);
out:
return err;
}
@@ -11820,7 +11916,7 @@
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
- free_ieee80211(priv->net_dev);
+ free_ieee80211(priv->net_dev, 0);
free_firmware();
}
@@ -11949,13 +12045,13 @@
module_param(auto_create, int, 0444);
MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)");
-module_param(led, int, 0444);
+module_param_named(led, led_support, int, 0444);
MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)");
module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "debug output mask");
-module_param(channel, int, 0444);
+module_param_named(channel, default_channel, int, 0444);
MODULE_PARM_DESC(channel, "channel to limit associate to (default 0 [ANY])");
#ifdef CONFIG_IPW2200_PROMISCUOUS
@@ -11981,10 +12077,10 @@
#endif /* CONFIG_IPW2200_QOS */
#ifdef CONFIG_IPW2200_MONITOR
-module_param(mode, int, 0444);
+module_param_named(mode, network_mode, int, 0444);
MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
#else
-module_param(mode, int, 0444);
+module_param_named(mode, network_mode, int, 0444);
MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS)");
#endif
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.h b/drivers/net/wireless/ipw2x00/ipw2200.h
index 05e8ccf..bf0eeb2 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.h
+++ b/drivers/net/wireless/ipw2x00/ipw2200.h
@@ -19,7 +19,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
@@ -55,7 +55,7 @@
#include <linux/workqueue.h>
-#include "ieee80211.h"
+#include "libipw.h"
/* Authentication and Association States */
enum connection_manager_assoc_states {
@@ -365,8 +365,8 @@
/* QoS sturctures */
struct ipw_qos_info {
int qos_enable;
- struct ieee80211_qos_parameters *def_qos_parm_OFDM;
- struct ieee80211_qos_parameters *def_qos_parm_CCK;
+ struct libipw_qos_parameters *def_qos_parm_OFDM;
+ struct libipw_qos_parameters *def_qos_parm_CCK;
u32 burst_duration_CCK;
u32 burst_duration_OFDM;
u16 qos_no_ack_mask;
@@ -534,7 +534,7 @@
struct clx2_tx_queue {
struct clx2_queue q;
struct tfd_frame *bd;
- struct ieee80211_txb **txb;
+ struct libipw_txb **txb;
};
/*
@@ -1144,7 +1144,7 @@
struct ipw_priv;
struct ipw_prom_priv {
struct ipw_priv *priv;
- struct ieee80211_device *ieee;
+ struct libipw_device *ieee;
enum ipw_prom_filter filter;
int tx_packets;
int rx_packets;
@@ -1175,7 +1175,7 @@
struct ipw_priv {
/* ieee device used by generic ieee processing code */
- struct ieee80211_device *ieee;
+ struct libipw_device *ieee;
spinlock_t lock;
spinlock_t irq_lock;
@@ -1222,7 +1222,7 @@
u32 roaming_threshold;
struct ipw_associate assoc_request;
- struct ieee80211_network *assoc_network;
+ struct libipw_network *assoc_network;
unsigned long ts_scan_abort;
struct ipw_supported_rates rates;
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
new file mode 100644
index 0000000..bf45391
--- /dev/null
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -0,0 +1,1092 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004-2005, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ *
+ * API Version History
+ * 1.0.x -- Initial version
+ * 1.1.x -- Added radiotap, QoS, TIM, libipw_geo APIs,
+ * various structure changes, and crypto API init method
+ */
+#ifndef LIBIPW_H
+#define LIBIPW_H
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h> /* ARRAY_SIZE */
+#include <linux/wireless.h>
+#include <linux/ieee80211.h>
+
+#include <net/lib80211.h>
+#include <net/cfg80211.h>
+
+#define LIBIPW_VERSION "git-1.1.13"
+
+#define LIBIPW_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+#define LIBIPW_1ADDR_LEN 10
+#define LIBIPW_2ADDR_LEN 16
+#define LIBIPW_3ADDR_LEN 24
+#define LIBIPW_4ADDR_LEN 30
+#define LIBIPW_FCS_LEN 4
+#define LIBIPW_HLEN (LIBIPW_4ADDR_LEN)
+#define LIBIPW_FRAME_LEN (LIBIPW_DATA_LEN + LIBIPW_HLEN)
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+/* QOS control */
+#define LIBIPW_QCTL_TID 0x000F
+
+/* debug macros */
+
+#ifdef CONFIG_LIBIPW_DEBUG
+extern u32 libipw_debug_level;
+#define LIBIPW_DEBUG(level, fmt, args...) \
+do { if (libipw_debug_level & (level)) \
+ printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
+ in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
+static inline bool libipw_ratelimit_debug(u32 level)
+{
+ return (libipw_debug_level & level) && net_ratelimit();
+}
+#else
+#define LIBIPW_DEBUG(level, fmt, args...) do {} while (0)
+static inline bool libipw_ratelimit_debug(u32 level)
+{
+ return false;
+}
+#endif /* CONFIG_LIBIPW_DEBUG */
+
+/*
+ * To use the debug system:
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define LIBIPW_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry. xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a LIBIPW_xxxx_DEBUG() macro definition for your
+ * classification, or use LIBIPW_DEBUG(LIBIPW_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ieee80211/debug_level
+ *
+ * you simply need to add your entry to the libipw_debug_level array.
+ *
+ * If you do not see debug_level in /proc/net/ieee80211 then you do not have
+ * CONFIG_LIBIPW_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define LIBIPW_DL_INFO (1<<0)
+#define LIBIPW_DL_WX (1<<1)
+#define LIBIPW_DL_SCAN (1<<2)
+#define LIBIPW_DL_STATE (1<<3)
+#define LIBIPW_DL_MGMT (1<<4)
+#define LIBIPW_DL_FRAG (1<<5)
+#define LIBIPW_DL_DROP (1<<7)
+
+#define LIBIPW_DL_TX (1<<8)
+#define LIBIPW_DL_RX (1<<9)
+#define LIBIPW_DL_QOS (1<<31)
+
+#define LIBIPW_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define LIBIPW_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define LIBIPW_DEBUG_INFO(f, a...) LIBIPW_DEBUG(LIBIPW_DL_INFO, f, ## a)
+
+#define LIBIPW_DEBUG_WX(f, a...) LIBIPW_DEBUG(LIBIPW_DL_WX, f, ## a)
+#define LIBIPW_DEBUG_SCAN(f, a...) LIBIPW_DEBUG(LIBIPW_DL_SCAN, f, ## a)
+#define LIBIPW_DEBUG_STATE(f, a...) LIBIPW_DEBUG(LIBIPW_DL_STATE, f, ## a)
+#define LIBIPW_DEBUG_MGMT(f, a...) LIBIPW_DEBUG(LIBIPW_DL_MGMT, f, ## a)
+#define LIBIPW_DEBUG_FRAG(f, a...) LIBIPW_DEBUG(LIBIPW_DL_FRAG, f, ## a)
+#define LIBIPW_DEBUG_DROP(f, a...) LIBIPW_DEBUG(LIBIPW_DL_DROP, f, ## a)
+#define LIBIPW_DEBUG_TX(f, a...) LIBIPW_DEBUG(LIBIPW_DL_TX, f, ## a)
+#define LIBIPW_DEBUG_RX(f, a...) LIBIPW_DEBUG(LIBIPW_DL_RX, f, ## a)
+#define LIBIPW_DEBUG_QOS(f, a...) LIBIPW_DEBUG(LIBIPW_DL_QOS, f, ## a)
+#include <linux/netdevice.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY /* enable iwspy support */
+#endif
+#include <net/iw_handler.h> /* new driver API */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct libipw_snap_hdr {
+
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct libipw_snap_hdr)
+
+#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
+
+#define LIBIPW_STATMASK_SIGNAL (1<<0)
+#define LIBIPW_STATMASK_RSSI (1<<1)
+#define LIBIPW_STATMASK_NOISE (1<<2)
+#define LIBIPW_STATMASK_RATE (1<<3)
+#define LIBIPW_STATMASK_WEMASK 0x7
+
+#define LIBIPW_CCK_MODULATION (1<<0)
+#define LIBIPW_OFDM_MODULATION (1<<1)
+
+#define LIBIPW_24GHZ_BAND (1<<0)
+#define LIBIPW_52GHZ_BAND (1<<1)
+
+#define LIBIPW_CCK_RATE_1MB 0x02
+#define LIBIPW_CCK_RATE_2MB 0x04
+#define LIBIPW_CCK_RATE_5MB 0x0B
+#define LIBIPW_CCK_RATE_11MB 0x16
+#define LIBIPW_OFDM_RATE_6MB 0x0C
+#define LIBIPW_OFDM_RATE_9MB 0x12
+#define LIBIPW_OFDM_RATE_12MB 0x18
+#define LIBIPW_OFDM_RATE_18MB 0x24
+#define LIBIPW_OFDM_RATE_24MB 0x30
+#define LIBIPW_OFDM_RATE_36MB 0x48
+#define LIBIPW_OFDM_RATE_48MB 0x60
+#define LIBIPW_OFDM_RATE_54MB 0x6C
+#define LIBIPW_BASIC_RATE_MASK 0x80
+
+#define LIBIPW_CCK_RATE_1MB_MASK (1<<0)
+#define LIBIPW_CCK_RATE_2MB_MASK (1<<1)
+#define LIBIPW_CCK_RATE_5MB_MASK (1<<2)
+#define LIBIPW_CCK_RATE_11MB_MASK (1<<3)
+#define LIBIPW_OFDM_RATE_6MB_MASK (1<<4)
+#define LIBIPW_OFDM_RATE_9MB_MASK (1<<5)
+#define LIBIPW_OFDM_RATE_12MB_MASK (1<<6)
+#define LIBIPW_OFDM_RATE_18MB_MASK (1<<7)
+#define LIBIPW_OFDM_RATE_24MB_MASK (1<<8)
+#define LIBIPW_OFDM_RATE_36MB_MASK (1<<9)
+#define LIBIPW_OFDM_RATE_48MB_MASK (1<<10)
+#define LIBIPW_OFDM_RATE_54MB_MASK (1<<11)
+
+#define LIBIPW_CCK_RATES_MASK 0x0000000F
+#define LIBIPW_CCK_BASIC_RATES_MASK (LIBIPW_CCK_RATE_1MB_MASK | \
+ LIBIPW_CCK_RATE_2MB_MASK)
+#define LIBIPW_CCK_DEFAULT_RATES_MASK (LIBIPW_CCK_BASIC_RATES_MASK | \
+ LIBIPW_CCK_RATE_5MB_MASK | \
+ LIBIPW_CCK_RATE_11MB_MASK)
+
+#define LIBIPW_OFDM_RATES_MASK 0x00000FF0
+#define LIBIPW_OFDM_BASIC_RATES_MASK (LIBIPW_OFDM_RATE_6MB_MASK | \
+ LIBIPW_OFDM_RATE_12MB_MASK | \
+ LIBIPW_OFDM_RATE_24MB_MASK)
+#define LIBIPW_OFDM_DEFAULT_RATES_MASK (LIBIPW_OFDM_BASIC_RATES_MASK | \
+ LIBIPW_OFDM_RATE_9MB_MASK | \
+ LIBIPW_OFDM_RATE_18MB_MASK | \
+ LIBIPW_OFDM_RATE_36MB_MASK | \
+ LIBIPW_OFDM_RATE_48MB_MASK | \
+ LIBIPW_OFDM_RATE_54MB_MASK)
+#define LIBIPW_DEFAULT_RATES_MASK (LIBIPW_OFDM_DEFAULT_RATES_MASK | \
+ LIBIPW_CCK_DEFAULT_RATES_MASK)
+
+#define LIBIPW_NUM_OFDM_RATES 8
+#define LIBIPW_NUM_CCK_RATES 4
+#define LIBIPW_OFDM_SHIFT_MASK_A 4
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ * information for frames received.
+ * For libipw_rx_mgt, you need to set at least the 'len' parameter.
+ */
+struct libipw_rx_stats {
+ u32 mac_time;
+ s8 rssi;
+ u8 signal;
+ u8 noise;
+ u16 rate; /* in 100 kbps */
+ u8 received_channel;
+ u8 control;
+ u8 mask;
+ u8 freq;
+ u16 len;
+ u64 tsf;
+ u32 beacon_time;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define LIBIPW_FRAG_CACHE_LEN 4
+
+struct libipw_frag_entry {
+ unsigned long first_frag_time;
+ unsigned int seq;
+ unsigned int last_frag;
+ struct sk_buff *skb;
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+};
+
+struct libipw_stats {
+ unsigned int tx_unicast_frames;
+ unsigned int tx_multicast_frames;
+ unsigned int tx_fragments;
+ unsigned int tx_unicast_octets;
+ unsigned int tx_multicast_octets;
+ unsigned int tx_deferred_transmissions;
+ unsigned int tx_single_retry_frames;
+ unsigned int tx_multiple_retry_frames;
+ unsigned int tx_retry_limit_exceeded;
+ unsigned int tx_discards;
+ unsigned int rx_unicast_frames;
+ unsigned int rx_multicast_frames;
+ unsigned int rx_fragments;
+ unsigned int rx_unicast_octets;
+ unsigned int rx_multicast_octets;
+ unsigned int rx_fcs_errors;
+ unsigned int rx_discards_no_buffer;
+ unsigned int tx_discards_wrong_sa;
+ unsigned int rx_discards_undecryptable;
+ unsigned int rx_message_in_msg_fragments;
+ unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct libipw_device;
+
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+#define SEC_ENCRYPT (1<<9)
+
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+
+#define SEC_ALG_NONE 0
+#define SEC_ALG_WEP 1
+#define SEC_ALG_TKIP 2
+#define SEC_ALG_CCMP 3
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+#define SCM_KEY_LEN 32
+#define SCM_TEMPORAL_KEY_LENGTH 16
+
+struct libipw_security {
+ u16 active_key:2, enabled:1, unicast_uses_group:1, encrypt:1;
+ u8 auth_mode;
+ u8 encode_alg[WEP_KEYS];
+ u8 key_sizes[WEP_KEYS];
+ u8 keys[WEP_KEYS][SCM_KEY_LEN];
+ u8 level;
+ u16 flags;
+} __attribute__ ((packed));
+
+/*
+
+ 802.11 data frame from AP
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+struct libipw_hdr_1addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct libipw_hdr_2addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct libipw_hdr_3addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct libipw_hdr_4addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct libipw_hdr_3addrqos {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+ __le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct libipw_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+ u16 auth_algorithm;
+ u16 auth_sequence;
+ u16 beacon_interval;
+ u16 capability;
+ u8 current_ap[ETH_ALEN];
+ u16 listen_interval;
+ struct {
+ u16 association_id:14, reserved:2;
+ } __attribute__ ((packed));
+ u32 time_stamp[2];
+ u16 reason;
+ u16 status;
+*/
+
+struct libipw_auth {
+ struct libipw_hdr_3addr header;
+ __le16 algorithm;
+ __le16 transaction;
+ __le16 status;
+ /* challenge */
+ struct libipw_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct libipw_channel_switch {
+ u8 id;
+ u8 len;
+ u8 mode;
+ u8 channel;
+ u8 count;
+} __attribute__ ((packed));
+
+struct libipw_action {
+ struct libipw_hdr_3addr header;
+ u8 category;
+ u8 action;
+ union {
+ struct libipw_action_exchange {
+ u8 token;
+ struct libipw_info_element info_element[0];
+ } exchange;
+ struct libipw_channel_switch channel_switch;
+
+ } format;
+} __attribute__ ((packed));
+
+struct libipw_disassoc {
+ struct libipw_hdr_3addr header;
+ __le16 reason;
+} __attribute__ ((packed));
+
+/* Alias deauth for disassoc */
+#define libipw_deauth libipw_disassoc
+
+struct libipw_probe_request {
+ struct libipw_hdr_3addr header;
+ /* SSID, supported rates */
+ struct libipw_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct libipw_probe_response {
+ struct libipw_hdr_3addr header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ /* SSID, supported rates, FH params, DS params,
+ * CF params, IBSS params, TIM (if beacon), RSN */
+ struct libipw_info_element info_element[0];
+} __attribute__ ((packed));
+
+/* Alias beacon for probe_response */
+#define libipw_beacon libipw_probe_response
+
+struct libipw_assoc_request {
+ struct libipw_hdr_3addr header;
+ __le16 capability;
+ __le16 listen_interval;
+ /* SSID, supported rates, RSN */
+ struct libipw_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct libipw_reassoc_request {
+ struct libipw_hdr_3addr header;
+ __le16 capability;
+ __le16 listen_interval;
+ u8 current_ap[ETH_ALEN];
+ struct libipw_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct libipw_assoc_response {
+ struct libipw_hdr_3addr header;
+ __le16 capability;
+ __le16 status;
+ __le16 aid;
+ /* supported rates */
+ struct libipw_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct libipw_txb {
+ u8 nr_frags;
+ u8 encrypted;
+ u8 rts_included;
+ u8 reserved;
+ u16 frag_size;
+ u16 payload_size;
+ struct sk_buff *fragments[0];
+};
+
+/* SWEEP TABLE ENTRIES NUMBER */
+#define MAX_SWEEP_TAB_ENTRIES 42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
+/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates. Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH ((u8)12)
+#define MAX_RATES_EX_LENGTH ((u8)16)
+#define MAX_NETWORK_COUNT 128
+
+#define CRC_LENGTH 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+/* QoS structure */
+#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
+#define NETWORK_HAS_QOS_INFORMATION (1<<4)
+#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
+ NETWORK_HAS_QOS_INFORMATION)
+
+/* 802.11h */
+#define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
+#define NETWORK_HAS_CSA (1<<6)
+#define NETWORK_HAS_QUIET (1<<7)
+#define NETWORK_HAS_IBSS_DFS (1<<8)
+#define NETWORK_HAS_TPC_REPORT (1<<9)
+
+#define NETWORK_HAS_ERP_VALUE (1<<10)
+
+#define QOS_QUEUE_NUM 4
+#define QOS_OUI_LEN 3
+#define QOS_OUI_TYPE 2
+#define QOS_ELEMENT_ID 221
+#define QOS_OUI_INFO_SUB_TYPE 0
+#define QOS_OUI_PARAM_SUB_TYPE 1
+#define QOS_VERSION_1 1
+#define QOS_AIFSN_MIN_VALUE 2
+
+struct libipw_qos_information_element {
+ u8 elementID;
+ u8 length;
+ u8 qui[QOS_OUI_LEN];
+ u8 qui_type;
+ u8 qui_subtype;
+ u8 version;
+ u8 ac_info;
+} __attribute__ ((packed));
+
+struct libipw_qos_ac_parameter {
+ u8 aci_aifsn;
+ u8 ecw_min_max;
+ __le16 tx_op_limit;
+} __attribute__ ((packed));
+
+struct libipw_qos_parameter_info {
+ struct libipw_qos_information_element info_element;
+ u8 reserved;
+ struct libipw_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct libipw_qos_parameters {
+ __le16 cw_min[QOS_QUEUE_NUM];
+ __le16 cw_max[QOS_QUEUE_NUM];
+ u8 aifs[QOS_QUEUE_NUM];
+ u8 flag[QOS_QUEUE_NUM];
+ __le16 tx_op_limit[QOS_QUEUE_NUM];
+} __attribute__ ((packed));
+
+struct libipw_qos_data {
+ struct libipw_qos_parameters parameters;
+ int active;
+ int supported;
+ u8 param_count;
+ u8 old_param_count;
+};
+
+struct libipw_tim_parameters {
+ u8 tim_count;
+ u8 tim_period;
+} __attribute__ ((packed));
+
+/*******************************************************/
+
+enum { /* libipw_basic_report.map */
+ LIBIPW_BASIC_MAP_BSS = (1 << 0),
+ LIBIPW_BASIC_MAP_OFDM = (1 << 1),
+ LIBIPW_BASIC_MAP_UNIDENTIFIED = (1 << 2),
+ LIBIPW_BASIC_MAP_RADAR = (1 << 3),
+ LIBIPW_BASIC_MAP_UNMEASURED = (1 << 4),
+ /* Bits 5-7 are reserved */
+
+};
+struct libipw_basic_report {
+ u8 channel;
+ __le64 start_time;
+ __le16 duration;
+ u8 map;
+} __attribute__ ((packed));
+
+enum { /* libipw_measurement_request.mode */
+ /* Bit 0 is reserved */
+ LIBIPW_MEASUREMENT_ENABLE = (1 << 1),
+ LIBIPW_MEASUREMENT_REQUEST = (1 << 2),
+ LIBIPW_MEASUREMENT_REPORT = (1 << 3),
+ /* Bits 4-7 are reserved */
+};
+
+enum {
+ LIBIPW_REPORT_BASIC = 0, /* required */
+ LIBIPW_REPORT_CCA = 1, /* optional */
+ LIBIPW_REPORT_RPI = 2, /* optional */
+ /* 3-255 reserved */
+};
+
+struct libipw_measurement_params {
+ u8 channel;
+ __le64 start_time;
+ __le16 duration;
+} __attribute__ ((packed));
+
+struct libipw_measurement_request {
+ struct libipw_info_element ie;
+ u8 token;
+ u8 mode;
+ u8 type;
+ struct libipw_measurement_params params[0];
+} __attribute__ ((packed));
+
+struct libipw_measurement_report {
+ struct libipw_info_element ie;
+ u8 token;
+ u8 mode;
+ u8 type;
+ union {
+ struct libipw_basic_report basic[0];
+ } u;
+} __attribute__ ((packed));
+
+struct libipw_tpc_report {
+ u8 transmit_power;
+ u8 link_margin;
+} __attribute__ ((packed));
+
+struct libipw_channel_map {
+ u8 channel;
+ u8 map;
+} __attribute__ ((packed));
+
+struct libipw_ibss_dfs {
+ struct libipw_info_element ie;
+ u8 owner[ETH_ALEN];
+ u8 recovery_interval;
+ struct libipw_channel_map channel_map[0];
+};
+
+struct libipw_csa {
+ u8 mode;
+ u8 channel;
+ u8 count;
+} __attribute__ ((packed));
+
+struct libipw_quiet {
+ u8 count;
+ u8 period;
+ u8 duration;
+ u8 offset;
+} __attribute__ ((packed));
+
+struct libipw_network {
+ /* These entries are used to identify a unique network */
+ u8 bssid[ETH_ALEN];
+ u8 channel;
+ /* Ensure null-terminated for any debug msgs */
+ u8 ssid[IW_ESSID_MAX_SIZE + 1];
+ u8 ssid_len;
+
+ struct libipw_qos_data qos_data;
+
+ /* These are network statistics */
+ struct libipw_rx_stats stats;
+ u16 capability;
+ u8 rates[MAX_RATES_LENGTH];
+ u8 rates_len;
+ u8 rates_ex[MAX_RATES_EX_LENGTH];
+ u8 rates_ex_len;
+ unsigned long last_scanned;
+ u8 mode;
+ u32 flags;
+ u32 last_associate;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 listen_interval;
+ u16 atim_window;
+ u8 erp_value;
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+ u8 rsn_ie[MAX_WPA_IE_LEN];
+ size_t rsn_ie_len;
+ struct libipw_tim_parameters tim;
+
+ /* 802.11h info */
+
+ /* Power Constraint - mandatory if spctrm mgmt required */
+ u8 power_constraint;
+
+ /* TPC Report - mandatory if spctrm mgmt required */
+ struct libipw_tpc_report tpc_report;
+
+ /* IBSS DFS - mandatory if spctrm mgmt required and IBSS
+ * NOTE: This is variable length and so must be allocated dynamically */
+ struct libipw_ibss_dfs *ibss_dfs;
+
+ /* Channel Switch Announcement - optional if spctrm mgmt required */
+ struct libipw_csa csa;
+
+ /* Quiet - optional if spctrm mgmt required */
+ struct libipw_quiet quiet;
+
+ struct list_head list;
+};
+
+enum libipw_state {
+ LIBIPW_UNINITIALIZED = 0,
+ LIBIPW_INITIALIZED,
+ LIBIPW_ASSOCIATING,
+ LIBIPW_ASSOCIATED,
+ LIBIPW_AUTHENTICATING,
+ LIBIPW_AUTHENTICATED,
+ LIBIPW_SHUTDOWN
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+#define CFG_LIBIPW_RESERVE_FCS (1<<0)
+#define CFG_LIBIPW_COMPUTE_FCS (1<<1)
+#define CFG_LIBIPW_RTS (1<<2)
+
+#define LIBIPW_24GHZ_MIN_CHANNEL 1
+#define LIBIPW_24GHZ_MAX_CHANNEL 14
+#define LIBIPW_24GHZ_CHANNELS (LIBIPW_24GHZ_MAX_CHANNEL - \
+ LIBIPW_24GHZ_MIN_CHANNEL + 1)
+
+#define LIBIPW_52GHZ_MIN_CHANNEL 34
+#define LIBIPW_52GHZ_MAX_CHANNEL 165
+#define LIBIPW_52GHZ_CHANNELS (LIBIPW_52GHZ_MAX_CHANNEL - \
+ LIBIPW_52GHZ_MIN_CHANNEL + 1)
+
+enum {
+ LIBIPW_CH_PASSIVE_ONLY = (1 << 0),
+ LIBIPW_CH_80211H_RULES = (1 << 1),
+ LIBIPW_CH_B_ONLY = (1 << 2),
+ LIBIPW_CH_NO_IBSS = (1 << 3),
+ LIBIPW_CH_UNIFORM_SPREADING = (1 << 4),
+ LIBIPW_CH_RADAR_DETECT = (1 << 5),
+ LIBIPW_CH_INVALID = (1 << 6),
+};
+
+struct libipw_channel {
+ u32 freq; /* in MHz */
+ u8 channel;
+ u8 flags;
+ u8 max_power; /* in dBm */
+};
+
+struct libipw_geo {
+ u8 name[4];
+ u8 bg_channels;
+ u8 a_channels;
+ struct libipw_channel bg[LIBIPW_24GHZ_CHANNELS];
+ struct libipw_channel a[LIBIPW_52GHZ_CHANNELS];
+};
+
+struct libipw_device {
+ struct net_device *dev;
+ struct wireless_dev wdev;
+ struct libipw_security sec;
+
+ /* Bookkeeping structures */
+ struct libipw_stats ieee_stats;
+
+ struct libipw_geo geo;
+ struct ieee80211_supported_band bg_band;
+ struct ieee80211_supported_band a_band;
+
+ /* Probe / Beacon management */
+ struct list_head network_free_list;
+ struct list_head network_list;
+ struct libipw_network *networks;
+ int scans;
+ int scan_age;
+
+ int iw_mode; /* operating mode (IW_MODE_*) */
+ struct iw_spy_data spy_data; /* iwspy support */
+
+ spinlock_t lock;
+
+ int tx_headroom; /* Set to size of any additional room needed at front
+ * of allocated Tx SKBs */
+ u32 config;
+
+ /* WEP and other encryption related settings at the device level */
+ int open_wep; /* Set to 1 to allow unencrypted frames */
+
+ int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+ * WEP key changes */
+
+ /* If the host performs {en,de}cryption, then set to 1 */
+ int host_encrypt;
+ int host_encrypt_msdu;
+ int host_decrypt;
+ /* host performs multicast decryption */
+ int host_mc_decrypt;
+
+ /* host should strip IV and ICV from protected frames */
+ /* meaningful only when hardware decryption is being used */
+ int host_strip_iv_icv;
+
+ int host_open_frag;
+ int host_build_iv;
+ int ieee802_1x; /* is IEEE 802.1X used */
+
+ /* WPA data */
+ int wpa_enabled;
+ int drop_unencrypted;
+ int privacy_invoked;
+ size_t wpa_ie_len;
+ u8 *wpa_ie;
+
+ struct lib80211_crypt_info crypt_info;
+
+ int bcrx_sta_key; /* use individual keys to override default keys even
+ * with RX of broad/multicast frames */
+
+ /* Fragmentation structures */
+ struct libipw_frag_entry frag_cache[LIBIPW_FRAG_CACHE_LEN];
+ unsigned int frag_next_idx;
+ u16 fts; /* Fragmentation Threshold */
+ u16 rts; /* RTS threshold */
+
+ /* Association info */
+ u8 bssid[ETH_ALEN];
+
+ enum libipw_state state;
+
+ int mode; /* A, B, G */
+ int modulation; /* CCK, OFDM */
+ int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
+ int abg_true; /* ABG flag */
+
+ int perfect_rssi;
+ int worst_rssi;
+
+ u16 prev_seq_ctl; /* used to drop duplicate frames */
+
+ /* Callback functions */
+ void (*set_security) (struct net_device * dev,
+ struct libipw_security * sec);
+ netdev_tx_t (*hard_start_xmit) (struct libipw_txb * txb,
+ struct net_device * dev, int pri);
+ int (*reset_port) (struct net_device * dev);
+ int (*is_queue_full) (struct net_device * dev, int pri);
+
+ int (*handle_management) (struct net_device * dev,
+ struct libipw_network * network, u16 type);
+ int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
+
+ /* Typical STA methods */
+ int (*handle_auth) (struct net_device * dev,
+ struct libipw_auth * auth);
+ int (*handle_deauth) (struct net_device * dev,
+ struct libipw_deauth * auth);
+ int (*handle_action) (struct net_device * dev,
+ struct libipw_action * action,
+ struct libipw_rx_stats * stats);
+ int (*handle_disassoc) (struct net_device * dev,
+ struct libipw_disassoc * assoc);
+ int (*handle_beacon) (struct net_device * dev,
+ struct libipw_beacon * beacon,
+ struct libipw_network * network);
+ int (*handle_probe_response) (struct net_device * dev,
+ struct libipw_probe_response * resp,
+ struct libipw_network * network);
+ int (*handle_probe_request) (struct net_device * dev,
+ struct libipw_probe_request * req,
+ struct libipw_rx_stats * stats);
+ int (*handle_assoc_response) (struct net_device * dev,
+ struct libipw_assoc_response * resp,
+ struct libipw_network * network);
+
+ /* Typical AP methods */
+ int (*handle_assoc_request) (struct net_device * dev);
+ int (*handle_reassoc_request) (struct net_device * dev,
+ struct libipw_reassoc_request * req);
+
+ /* This must be the last item so that it points to the data
+ * allocated beyond this structure by alloc_ieee80211 */
+ u8 priv[0];
+};
+
+#define IEEE_A (1<<0)
+#define IEEE_B (1<<1)
+#define IEEE_G (1<<2)
+#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
+
+static inline void *libipw_priv(struct net_device *dev)
+{
+ return ((struct libipw_device *)netdev_priv(dev))->priv;
+}
+
+static inline int libipw_is_valid_mode(struct libipw_device *ieee,
+ int mode)
+{
+ /*
+ * It is possible for both access points and our device to support
+ * combinations of modes, so as long as there is one valid combination
+ * of ap/device supported modes, then return success
+ *
+ */
+ if ((mode & IEEE_A) &&
+ (ieee->modulation & LIBIPW_OFDM_MODULATION) &&
+ (ieee->freq_band & LIBIPW_52GHZ_BAND))
+ return 1;
+
+ if ((mode & IEEE_G) &&
+ (ieee->modulation & LIBIPW_OFDM_MODULATION) &&
+ (ieee->freq_band & LIBIPW_24GHZ_BAND))
+ return 1;
+
+ if ((mode & IEEE_B) &&
+ (ieee->modulation & LIBIPW_CCK_MODULATION) &&
+ (ieee->freq_band & LIBIPW_24GHZ_BAND))
+ return 1;
+
+ return 0;
+}
+
+static inline int libipw_get_hdrlen(u16 fc)
+{
+ int hdrlen = LIBIPW_3ADDR_LEN;
+ u16 stype = WLAN_FC_GET_STYPE(fc);
+
+ switch (WLAN_FC_GET_TYPE(fc)) {
+ case IEEE80211_FTYPE_DATA:
+ if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+ hdrlen = LIBIPW_4ADDR_LEN;
+ if (stype & IEEE80211_STYPE_QOS_DATA)
+ hdrlen += 2;
+ break;
+ case IEEE80211_FTYPE_CTL:
+ switch (WLAN_FC_GET_STYPE(fc)) {
+ case IEEE80211_STYPE_CTS:
+ case IEEE80211_STYPE_ACK:
+ hdrlen = LIBIPW_1ADDR_LEN;
+ break;
+ default:
+ hdrlen = LIBIPW_2ADDR_LEN;
+ break;
+ }
+ break;
+ }
+
+ return hdrlen;
+}
+
+static inline u8 *libipw_get_payload(struct ieee80211_hdr *hdr)
+{
+ switch (libipw_get_hdrlen(le16_to_cpu(hdr->frame_control))) {
+ case LIBIPW_1ADDR_LEN:
+ return ((struct libipw_hdr_1addr *)hdr)->payload;
+ case LIBIPW_2ADDR_LEN:
+ return ((struct libipw_hdr_2addr *)hdr)->payload;
+ case LIBIPW_3ADDR_LEN:
+ return ((struct libipw_hdr_3addr *)hdr)->payload;
+ case LIBIPW_4ADDR_LEN:
+ return ((struct libipw_hdr_4addr *)hdr)->payload;
+ }
+ return NULL;
+}
+
+static inline int libipw_is_ofdm_rate(u8 rate)
+{
+ switch (rate & ~LIBIPW_BASIC_RATE_MASK) {
+ case LIBIPW_OFDM_RATE_6MB:
+ case LIBIPW_OFDM_RATE_9MB:
+ case LIBIPW_OFDM_RATE_12MB:
+ case LIBIPW_OFDM_RATE_18MB:
+ case LIBIPW_OFDM_RATE_24MB:
+ case LIBIPW_OFDM_RATE_36MB:
+ case LIBIPW_OFDM_RATE_48MB:
+ case LIBIPW_OFDM_RATE_54MB:
+ return 1;
+ }
+ return 0;
+}
+
+static inline int libipw_is_cck_rate(u8 rate)
+{
+ switch (rate & ~LIBIPW_BASIC_RATE_MASK) {
+ case LIBIPW_CCK_RATE_1MB:
+ case LIBIPW_CCK_RATE_2MB:
+ case LIBIPW_CCK_RATE_5MB:
+ case LIBIPW_CCK_RATE_11MB:
+ return 1;
+ }
+ return 0;
+}
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev, int monitor);
+extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
+
+extern void libipw_networks_age(struct libipw_device *ieee,
+ unsigned long age_secs);
+
+extern int libipw_set_encryption(struct libipw_device *ieee);
+
+/* libipw_tx.c */
+extern netdev_tx_t libipw_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+extern void libipw_txb_free(struct libipw_txb *);
+
+/* libipw_rx.c */
+extern void libipw_rx_any(struct libipw_device *ieee,
+ struct sk_buff *skb, struct libipw_rx_stats *stats);
+extern int libipw_rx(struct libipw_device *ieee, struct sk_buff *skb,
+ struct libipw_rx_stats *rx_stats);
+/* make sure to set stats->len */
+extern void libipw_rx_mgt(struct libipw_device *ieee,
+ struct libipw_hdr_4addr *header,
+ struct libipw_rx_stats *stats);
+extern void libipw_network_reset(struct libipw_network *network);
+
+/* libipw_geo.c */
+extern const struct libipw_geo *libipw_get_geo(struct libipw_device
+ *ieee);
+extern int libipw_set_geo(struct libipw_device *ieee,
+ const struct libipw_geo *geo);
+
+extern int libipw_is_valid_channel(struct libipw_device *ieee,
+ u8 channel);
+extern int libipw_channel_to_index(struct libipw_device *ieee,
+ u8 channel);
+extern u8 libipw_freq_to_channel(struct libipw_device *ieee, u32 freq);
+extern u8 libipw_get_channel_flags(struct libipw_device *ieee,
+ u8 channel);
+extern const struct libipw_channel *libipw_get_channel(struct
+ libipw_device
+ *ieee, u8 channel);
+extern u32 libipw_channel_to_freq(struct libipw_device * ieee,
+ u8 channel);
+
+/* libipw_wx.c */
+extern int libipw_wx_get_scan(struct libipw_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int libipw_wx_set_encode(struct libipw_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int libipw_wx_get_encode(struct libipw_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int libipw_wx_set_encodeext(struct libipw_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
+extern int libipw_wx_get_encodeext(struct libipw_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra);
+
+static inline void libipw_increment_scans(struct libipw_device *ieee)
+{
+ ieee->scans++;
+}
+
+static inline int libipw_get_scans(struct libipw_device *ieee)
+{
+ return ieee->scans;
+}
+
+#endif /* LIBIPW_H */
diff --git a/drivers/net/wireless/ipw2x00/libipw_geo.c b/drivers/net/wireless/ipw2x00/libipw_geo.c
index 9dfbb87..65e8c17 100644
--- a/drivers/net/wireless/ipw2x00/libipw_geo.c
+++ b/drivers/net/wireless/ipw2x00/libipw_geo.c
@@ -19,7 +19,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
@@ -41,9 +41,9 @@
#include <linux/etherdevice.h>
#include <asm/uaccess.h>
-#include "ieee80211.h"
+#include "libipw.h"
-int ieee80211_is_valid_channel(struct ieee80211_device *ieee, u8 channel)
+int libipw_is_valid_channel(struct libipw_device *ieee, u8 channel)
{
int i;
@@ -52,27 +52,27 @@
if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
return 0;
- if (ieee->freq_band & IEEE80211_24GHZ_BAND)
+ if (ieee->freq_band & LIBIPW_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
/* NOTE: If G mode is currently supported but
* this is a B only channel, we don't see it
* as valid. */
if ((ieee->geo.bg[i].channel == channel) &&
- !(ieee->geo.bg[i].flags & IEEE80211_CH_INVALID) &&
+ !(ieee->geo.bg[i].flags & LIBIPW_CH_INVALID) &&
(!(ieee->mode & IEEE_G) ||
- !(ieee->geo.bg[i].flags & IEEE80211_CH_B_ONLY)))
- return IEEE80211_24GHZ_BAND;
+ !(ieee->geo.bg[i].flags & LIBIPW_CH_B_ONLY)))
+ return LIBIPW_24GHZ_BAND;
- if (ieee->freq_band & IEEE80211_52GHZ_BAND)
+ if (ieee->freq_band & LIBIPW_52GHZ_BAND)
for (i = 0; i < ieee->geo.a_channels; i++)
if ((ieee->geo.a[i].channel == channel) &&
- !(ieee->geo.a[i].flags & IEEE80211_CH_INVALID))
- return IEEE80211_52GHZ_BAND;
+ !(ieee->geo.a[i].flags & LIBIPW_CH_INVALID))
+ return LIBIPW_52GHZ_BAND;
return 0;
}
-int ieee80211_channel_to_index(struct ieee80211_device *ieee, u8 channel)
+int libipw_channel_to_index(struct libipw_device *ieee, u8 channel)
{
int i;
@@ -81,12 +81,12 @@
if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
return -1;
- if (ieee->freq_band & IEEE80211_24GHZ_BAND)
+ if (ieee->freq_band & LIBIPW_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
if (ieee->geo.bg[i].channel == channel)
return i;
- if (ieee->freq_band & IEEE80211_52GHZ_BAND)
+ if (ieee->freq_band & LIBIPW_52GHZ_BAND)
for (i = 0; i < ieee->geo.a_channels; i++)
if (ieee->geo.a[i].channel == channel)
return i;
@@ -94,22 +94,22 @@
return -1;
}
-u32 ieee80211_channel_to_freq(struct ieee80211_device * ieee, u8 channel)
+u32 libipw_channel_to_freq(struct libipw_device * ieee, u8 channel)
{
- const struct ieee80211_channel * ch;
+ const struct libipw_channel * ch;
/* Driver needs to initialize the geography map before using
* these helper functions */
if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
return 0;
- ch = ieee80211_get_channel(ieee, channel);
+ ch = libipw_get_channel(ieee, channel);
if (!ch->channel)
return 0;
return ch->freq;
}
-u8 ieee80211_freq_to_channel(struct ieee80211_device * ieee, u32 freq)
+u8 libipw_freq_to_channel(struct libipw_device * ieee, u32 freq)
{
int i;
@@ -120,12 +120,12 @@
freq /= 100000;
- if (ieee->freq_band & IEEE80211_24GHZ_BAND)
+ if (ieee->freq_band & LIBIPW_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
if (ieee->geo.bg[i].freq == freq)
return ieee->geo.bg[i].channel;
- if (ieee->freq_band & IEEE80211_52GHZ_BAND)
+ if (ieee->freq_band & LIBIPW_52GHZ_BAND)
for (i = 0; i < ieee->geo.a_channels; i++)
if (ieee->geo.a[i].freq == freq)
return ieee->geo.a[i].channel;
@@ -133,63 +133,63 @@
return 0;
}
-int ieee80211_set_geo(struct ieee80211_device *ieee,
- const struct ieee80211_geo *geo)
+int libipw_set_geo(struct libipw_device *ieee,
+ const struct libipw_geo *geo)
{
memcpy(ieee->geo.name, geo->name, 3);
ieee->geo.name[3] = '\0';
ieee->geo.bg_channels = geo->bg_channels;
ieee->geo.a_channels = geo->a_channels;
memcpy(ieee->geo.bg, geo->bg, geo->bg_channels *
- sizeof(struct ieee80211_channel));
+ sizeof(struct libipw_channel));
memcpy(ieee->geo.a, geo->a, ieee->geo.a_channels *
- sizeof(struct ieee80211_channel));
+ sizeof(struct libipw_channel));
return 0;
}
-const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device *ieee)
+const struct libipw_geo *libipw_get_geo(struct libipw_device *ieee)
{
return &ieee->geo;
}
-u8 ieee80211_get_channel_flags(struct ieee80211_device * ieee, u8 channel)
+u8 libipw_get_channel_flags(struct libipw_device * ieee, u8 channel)
{
- int index = ieee80211_channel_to_index(ieee, channel);
+ int index = libipw_channel_to_index(ieee, channel);
if (index == -1)
- return IEEE80211_CH_INVALID;
+ return LIBIPW_CH_INVALID;
- if (channel <= IEEE80211_24GHZ_CHANNELS)
+ if (channel <= LIBIPW_24GHZ_CHANNELS)
return ieee->geo.bg[index].flags;
return ieee->geo.a[index].flags;
}
-static const struct ieee80211_channel bad_channel = {
+static const struct libipw_channel bad_channel = {
.channel = 0,
- .flags = IEEE80211_CH_INVALID,
+ .flags = LIBIPW_CH_INVALID,
.max_power = 0,
};
-const struct ieee80211_channel *ieee80211_get_channel(struct ieee80211_device
+const struct libipw_channel *libipw_get_channel(struct libipw_device
*ieee, u8 channel)
{
- int index = ieee80211_channel_to_index(ieee, channel);
+ int index = libipw_channel_to_index(ieee, channel);
if (index == -1)
return &bad_channel;
- if (channel <= IEEE80211_24GHZ_CHANNELS)
+ if (channel <= LIBIPW_24GHZ_CHANNELS)
return &ieee->geo.bg[index];
return &ieee->geo.a[index];
}
-EXPORT_SYMBOL(ieee80211_get_channel);
-EXPORT_SYMBOL(ieee80211_get_channel_flags);
-EXPORT_SYMBOL(ieee80211_is_valid_channel);
-EXPORT_SYMBOL(ieee80211_freq_to_channel);
-EXPORT_SYMBOL(ieee80211_channel_to_freq);
-EXPORT_SYMBOL(ieee80211_channel_to_index);
-EXPORT_SYMBOL(ieee80211_set_geo);
-EXPORT_SYMBOL(ieee80211_get_geo);
+EXPORT_SYMBOL(libipw_get_channel);
+EXPORT_SYMBOL(libipw_get_channel_flags);
+EXPORT_SYMBOL(libipw_is_valid_channel);
+EXPORT_SYMBOL(libipw_freq_to_channel);
+EXPORT_SYMBOL(libipw_channel_to_freq);
+EXPORT_SYMBOL(libipw_channel_to_index);
+EXPORT_SYMBOL(libipw_set_geo);
+EXPORT_SYMBOL(libipw_get_geo);
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index 8ce6e96..a0e9f6a 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -25,7 +25,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
@@ -50,11 +50,11 @@
#include <net/net_namespace.h>
#include <net/arp.h>
-#include "ieee80211.h"
+#include "libipw.h"
#define DRV_DESCRIPTION "802.11 data/management/control stack"
#define DRV_NAME "ieee80211"
-#define DRV_VERSION IEEE80211_VERSION
+#define DRV_VERSION LIBIPW_VERSION
#define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>"
MODULE_VERSION(DRV_VERSION);
@@ -62,13 +62,16 @@
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
-static int ieee80211_networks_allocate(struct ieee80211_device *ieee)
+struct cfg80211_ops libipw_config_ops = { };
+void *libipw_wiphy_privid = &libipw_wiphy_privid;
+
+static int libipw_networks_allocate(struct libipw_device *ieee)
{
if (ieee->networks)
return 0;
ieee->networks =
- kzalloc(MAX_NETWORK_COUNT * sizeof(struct ieee80211_network),
+ kzalloc(MAX_NETWORK_COUNT * sizeof(struct libipw_network),
GFP_KERNEL);
if (!ieee->networks) {
printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
@@ -79,7 +82,7 @@
return 0;
}
-void ieee80211_network_reset(struct ieee80211_network *network)
+void libipw_network_reset(struct libipw_network *network)
{
if (!network)
return;
@@ -90,7 +93,7 @@
}
}
-static inline void ieee80211_networks_free(struct ieee80211_device *ieee)
+static inline void libipw_networks_free(struct libipw_device *ieee)
{
int i;
@@ -105,10 +108,10 @@
ieee->networks = NULL;
}
-void ieee80211_networks_age(struct ieee80211_device *ieee,
+void libipw_networks_age(struct libipw_device *ieee,
unsigned long age_secs)
{
- struct ieee80211_network *network = NULL;
+ struct libipw_network *network = NULL;
unsigned long flags;
unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC);
@@ -118,9 +121,9 @@
}
spin_unlock_irqrestore(&ieee->lock, flags);
}
-EXPORT_SYMBOL(ieee80211_networks_age);
+EXPORT_SYMBOL(libipw_networks_age);
-static void ieee80211_networks_initialize(struct ieee80211_device *ieee)
+static void libipw_networks_initialize(struct libipw_device *ieee)
{
int i;
@@ -131,38 +134,59 @@
&ieee->network_free_list);
}
-int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
+int libipw_change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || (new_mtu > IEEE80211_DATA_LEN))
+ if ((new_mtu < 68) || (new_mtu > LIBIPW_DATA_LEN))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
-EXPORT_SYMBOL(ieee80211_change_mtu);
+EXPORT_SYMBOL(libipw_change_mtu);
-struct net_device *alloc_ieee80211(int sizeof_priv)
+struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
{
- struct ieee80211_device *ieee;
+ struct libipw_device *ieee;
struct net_device *dev;
int err;
- IEEE80211_DEBUG_INFO("Initializing...\n");
+ LIBIPW_DEBUG_INFO("Initializing...\n");
- dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv);
+ dev = alloc_etherdev(sizeof(struct libipw_device) + sizeof_priv);
if (!dev) {
- IEEE80211_ERROR("Unable to allocate network device.\n");
+ LIBIPW_ERROR("Unable to allocate network device.\n");
goto failed;
}
ieee = netdev_priv(dev);
ieee->dev = dev;
- err = ieee80211_networks_allocate(ieee);
- if (err) {
- IEEE80211_ERROR("Unable to allocate beacon storage: %d\n", err);
- goto failed_free_netdev;
+ if (!monitor) {
+ ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0);
+ if (!ieee->wdev.wiphy) {
+ LIBIPW_ERROR("Unable to allocate wiphy.\n");
+ goto failed_free_netdev;
+ }
+
+ ieee->dev->ieee80211_ptr = &ieee->wdev;
+ ieee->wdev.iftype = NL80211_IFTYPE_STATION;
+
+ /* Fill-out wiphy structure bits we know... Not enough info
+ here to call set_wiphy_dev or set MAC address or channel info
+ -- have to do that in ->ndo_init... */
+ ieee->wdev.wiphy->privid = libipw_wiphy_privid;
+
+ ieee->wdev.wiphy->max_scan_ssids = 1;
+ ieee->wdev.wiphy->max_scan_ie_len = 0;
+ ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
+ | BIT(NL80211_IFTYPE_ADHOC);
}
- ieee80211_networks_initialize(ieee);
+
+ err = libipw_networks_allocate(ieee);
+ if (err) {
+ LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err);
+ goto failed_free_wiphy;
+ }
+ libipw_networks_initialize(ieee);
/* Default fragmentation threshold is maximum payload size */
ieee->fts = DEFAULT_FTS;
@@ -193,33 +217,45 @@
return dev;
+failed_free_wiphy:
+ if (!monitor)
+ wiphy_free(ieee->wdev.wiphy);
failed_free_netdev:
free_netdev(dev);
failed:
return NULL;
}
-void free_ieee80211(struct net_device *dev)
+void free_ieee80211(struct net_device *dev, int monitor)
{
- struct ieee80211_device *ieee = netdev_priv(dev);
+ struct libipw_device *ieee = netdev_priv(dev);
lib80211_crypt_info_free(&ieee->crypt_info);
- ieee80211_networks_free(ieee);
+ libipw_networks_free(ieee);
+
+ /* free cfg80211 resources */
+ if (!monitor) {
+ wiphy_unregister(ieee->wdev.wiphy);
+ kfree(ieee->a_band.channels);
+ kfree(ieee->bg_band.channels);
+ wiphy_free(ieee->wdev.wiphy);
+ }
+
free_netdev(dev);
}
#ifdef CONFIG_LIBIPW_DEBUG
static int debug = 0;
-u32 ieee80211_debug_level = 0;
-EXPORT_SYMBOL_GPL(ieee80211_debug_level);
-static struct proc_dir_entry *ieee80211_proc = NULL;
+u32 libipw_debug_level = 0;
+EXPORT_SYMBOL_GPL(libipw_debug_level);
+static struct proc_dir_entry *libipw_proc = NULL;
static int show_debug_level(char *page, char **start, off_t offset,
int count, int *eof, void *data)
{
- return snprintf(page, count, "0x%08X\n", ieee80211_debug_level);
+ return snprintf(page, count, "0x%08X\n", libipw_debug_level);
}
static int store_debug_level(struct file *file, const char __user * buffer,
@@ -236,29 +272,29 @@
printk(KERN_INFO DRV_NAME
": %s is not in hex or decimal form.\n", buf);
else
- ieee80211_debug_level = val;
+ libipw_debug_level = val;
return strnlen(buf, len);
}
#endif /* CONFIG_LIBIPW_DEBUG */
-static int __init ieee80211_init(void)
+static int __init libipw_init(void)
{
#ifdef CONFIG_LIBIPW_DEBUG
struct proc_dir_entry *e;
- ieee80211_debug_level = debug;
- ieee80211_proc = proc_mkdir(DRV_NAME, init_net.proc_net);
- if (ieee80211_proc == NULL) {
- IEEE80211_ERROR("Unable to create " DRV_NAME
+ libipw_debug_level = debug;
+ libipw_proc = proc_mkdir(DRV_NAME, init_net.proc_net);
+ if (libipw_proc == NULL) {
+ LIBIPW_ERROR("Unable to create " DRV_NAME
" proc directory\n");
return -EIO;
}
e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
- ieee80211_proc);
+ libipw_proc);
if (!e) {
remove_proc_entry(DRV_NAME, init_net.proc_net);
- ieee80211_proc = NULL;
+ libipw_proc = NULL;
return -EIO;
}
e->read_proc = show_debug_level;
@@ -272,13 +308,13 @@
return 0;
}
-static void __exit ieee80211_exit(void)
+static void __exit libipw_exit(void)
{
#ifdef CONFIG_LIBIPW_DEBUG
- if (ieee80211_proc) {
- remove_proc_entry("debug_level", ieee80211_proc);
+ if (libipw_proc) {
+ remove_proc_entry("debug_level", libipw_proc);
remove_proc_entry(DRV_NAME, init_net.proc_net);
- ieee80211_proc = NULL;
+ libipw_proc = NULL;
}
#endif /* CONFIG_LIBIPW_DEBUG */
}
@@ -289,8 +325,8 @@
MODULE_PARM_DESC(debug, "debug output mask");
#endif /* CONFIG_LIBIPW_DEBUG */
-module_exit(ieee80211_exit);
-module_init(ieee80211_init);
+module_exit(libipw_exit);
+module_init(libipw_init);
EXPORT_SYMBOL(alloc_ieee80211);
EXPORT_SYMBOL(free_ieee80211);
diff --git a/drivers/net/wireless/ipw2x00/libipw_rx.c b/drivers/net/wireless/ipw2x00/libipw_rx.c
index dae4b8e..282b1f7 100644
--- a/drivers/net/wireless/ipw2x00/libipw_rx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_rx.c
@@ -34,18 +34,18 @@
#include <net/lib80211.h>
-#include "ieee80211.h"
+#include "libipw.h"
-static void ieee80211_monitor_rx(struct ieee80211_device *ieee,
+static void libipw_monitor_rx(struct libipw_device *ieee,
struct sk_buff *skb,
- struct ieee80211_rx_stats *rx_stats)
+ struct libipw_rx_stats *rx_stats)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
u16 fc = le16_to_cpu(hdr->frame_control);
skb->dev = ieee->dev;
skb_reset_mac_header(skb);
- skb_pull(skb, ieee80211_get_hdrlen(fc));
+ skb_pull(skb, libipw_get_hdrlen(fc));
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_80211_RAW);
memset(skb->cb, 0, sizeof(skb->cb));
@@ -53,22 +53,22 @@
}
/* Called only as a tasklet (software IRQ) */
-static struct ieee80211_frag_entry *ieee80211_frag_cache_find(struct
- ieee80211_device
+static struct libipw_frag_entry *libipw_frag_cache_find(struct
+ libipw_device
*ieee,
unsigned int seq,
unsigned int frag,
u8 * src,
u8 * dst)
{
- struct ieee80211_frag_entry *entry;
+ struct libipw_frag_entry *entry;
int i;
- for (i = 0; i < IEEE80211_FRAG_CACHE_LEN; i++) {
+ for (i = 0; i < LIBIPW_FRAG_CACHE_LEN; i++) {
entry = &ieee->frag_cache[i];
if (entry->skb != NULL &&
time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
- IEEE80211_DEBUG_FRAG("expiring fragment cache entry "
+ LIBIPW_DEBUG_FRAG("expiring fragment cache entry "
"seq=%u last_frag=%u\n",
entry->seq, entry->last_frag);
dev_kfree_skb_any(entry->skb);
@@ -86,13 +86,13 @@
}
/* Called only as a tasklet (software IRQ) */
-static struct sk_buff *ieee80211_frag_cache_get(struct ieee80211_device *ieee,
- struct ieee80211_hdr_4addr *hdr)
+static struct sk_buff *libipw_frag_cache_get(struct libipw_device *ieee,
+ struct libipw_hdr_4addr *hdr)
{
struct sk_buff *skb = NULL;
u16 sc;
unsigned int frag, seq;
- struct ieee80211_frag_entry *entry;
+ struct libipw_frag_entry *entry;
sc = le16_to_cpu(hdr->seq_ctl);
frag = WLAN_GET_SEQ_FRAG(sc);
@@ -101,7 +101,7 @@
if (frag == 0) {
/* Reserve enough space to fit maximum frame length */
skb = dev_alloc_skb(ieee->dev->mtu +
- sizeof(struct ieee80211_hdr_4addr) +
+ sizeof(struct libipw_hdr_4addr) +
8 /* LLC */ +
2 /* alignment */ +
8 /* WEP */ + ETH_ALEN /* WDS */ );
@@ -110,7 +110,7 @@
entry = &ieee->frag_cache[ieee->frag_next_idx];
ieee->frag_next_idx++;
- if (ieee->frag_next_idx >= IEEE80211_FRAG_CACHE_LEN)
+ if (ieee->frag_next_idx >= LIBIPW_FRAG_CACHE_LEN)
ieee->frag_next_idx = 0;
if (entry->skb != NULL)
@@ -125,7 +125,7 @@
} else {
/* received a fragment of a frame for which the head fragment
* should have already been received */
- entry = ieee80211_frag_cache_find(ieee, seq, frag, hdr->addr2,
+ entry = libipw_frag_cache_find(ieee, seq, frag, hdr->addr2,
hdr->addr1);
if (entry != NULL) {
entry->last_frag = frag;
@@ -137,21 +137,21 @@
}
/* Called only as a tasklet (software IRQ) */
-static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
- struct ieee80211_hdr_4addr *hdr)
+static int libipw_frag_cache_invalidate(struct libipw_device *ieee,
+ struct libipw_hdr_4addr *hdr)
{
u16 sc;
unsigned int seq;
- struct ieee80211_frag_entry *entry;
+ struct libipw_frag_entry *entry;
sc = le16_to_cpu(hdr->seq_ctl);
seq = WLAN_GET_SEQ_SEQ(sc);
- entry = ieee80211_frag_cache_find(ieee, seq, -1, hdr->addr2,
+ entry = libipw_frag_cache_find(ieee, seq, -1, hdr->addr2,
hdr->addr1);
if (entry == NULL) {
- IEEE80211_DEBUG_FRAG("could not invalidate fragment cache "
+ LIBIPW_DEBUG_FRAG("could not invalidate fragment cache "
"entry (seq=%u)\n", seq);
return -1;
}
@@ -161,14 +161,14 @@
}
#ifdef NOT_YET
-/* ieee80211_rx_frame_mgtmt
+/* libipw_rx_frame_mgtmt
*
* Responsible for handling management control frames
*
- * Called by ieee80211_rx */
+ * Called by libipw_rx */
static int
-ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
- struct ieee80211_rx_stats *rx_stats, u16 type,
+libipw_rx_frame_mgmt(struct libipw_device *ieee, struct sk_buff *skb,
+ struct libipw_rx_stats *rx_stats, u16 type,
u16 stype)
{
if (ieee->iw_mode == IW_MODE_MASTER) {
@@ -176,7 +176,7 @@
ieee->dev->name);
return 0;
/*
- hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *)
+ hostap_update_sta_ps(ieee, (struct hostap_libipw_hdr_4addr *)
skb->data);*/
}
@@ -219,26 +219,27 @@
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+static unsigned char libipw_rfc1042_header[] =
+ { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] =
+static unsigned char libipw_bridge_tunnel_header[] =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
/* No encapsulation header if EtherType < 0x600 (=length) */
-/* Called by ieee80211_rx_frame_decrypt */
-static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
+/* Called by libipw_rx_frame_decrypt */
+static int libipw_is_eapol_frame(struct libipw_device *ieee,
struct sk_buff *skb)
{
struct net_device *dev = ieee->dev;
u16 fc, ethertype;
- struct ieee80211_hdr_3addr *hdr;
+ struct libipw_hdr_3addr *hdr;
u8 *pos;
if (skb->len < 24)
return 0;
- hdr = (struct ieee80211_hdr_3addr *)skb->data;
+ hdr = (struct libipw_hdr_3addr *)skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
/* check that the frame is unicast frame to us */
@@ -266,28 +267,28 @@
return 0;
}
-/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+/* Called only as a tasklet (software IRQ), by libipw_rx */
static int
-ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
+libipw_rx_frame_decrypt(struct libipw_device *ieee, struct sk_buff *skb,
struct lib80211_crypt_data *crypt)
{
- struct ieee80211_hdr_3addr *hdr;
+ struct libipw_hdr_3addr *hdr;
int res, hdrlen;
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
- hdr = (struct ieee80211_hdr_3addr *)skb->data;
- hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+ hdr = (struct libipw_hdr_3addr *)skb->data;
+ hdrlen = libipw_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
atomic_inc(&crypt->refcnt);
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- IEEE80211_DEBUG_DROP("decryption failed (SA=%pM) res=%d\n",
+ LIBIPW_DEBUG_DROP("decryption failed (SA=%pM) res=%d\n",
hdr->addr2, res);
if (res == -2)
- IEEE80211_DEBUG_DROP("Decryption failed ICV "
+ LIBIPW_DEBUG_DROP("Decryption failed ICV "
"mismatch (key %d)\n",
skb->data[hdrlen + 3] >> 6);
ieee->ieee_stats.rx_discards_undecryptable++;
@@ -297,20 +298,20 @@
return res;
}
-/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+/* Called only as a tasklet (software IRQ), by libipw_rx */
static int
-ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee,
+libipw_rx_frame_decrypt_msdu(struct libipw_device *ieee,
struct sk_buff *skb, int keyidx,
struct lib80211_crypt_data *crypt)
{
- struct ieee80211_hdr_3addr *hdr;
+ struct libipw_hdr_3addr *hdr;
int res, hdrlen;
if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
return 0;
- hdr = (struct ieee80211_hdr_3addr *)skb->data;
- hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+ hdr = (struct libipw_hdr_3addr *)skb->data;
+ hdrlen = libipw_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
atomic_inc(&crypt->refcnt);
res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
@@ -328,11 +329,11 @@
/* All received frames are sent to this function. @skb contains the frame in
* IEEE 802.11 format, i.e., in the format it was sent over air.
* This function is called only as a tasklet (software IRQ). */
-int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
- struct ieee80211_rx_stats *rx_stats)
+int libipw_rx(struct libipw_device *ieee, struct sk_buff *skb,
+ struct libipw_rx_stats *rx_stats)
{
struct net_device *dev = ieee->dev;
- struct ieee80211_hdr_4addr *hdr;
+ struct libipw_hdr_4addr *hdr;
size_t hdrlen;
u16 fc, type, stype, sc;
unsigned int frag;
@@ -352,7 +353,7 @@
int keyidx = 0;
int can_be_decrypted = 0;
- hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ hdr = (struct libipw_hdr_4addr *)skb->data;
if (skb->len < 10) {
printk(KERN_INFO "%s: SKB length < 10\n", dev->name);
goto rx_dropped;
@@ -363,7 +364,7 @@
stype = WLAN_FC_GET_STYPE(fc);
sc = le16_to_cpu(hdr->seq_ctl);
frag = WLAN_GET_SEQ_FRAG(sc);
- hdrlen = ieee80211_get_hdrlen(fc);
+ hdrlen = libipw_get_hdrlen(fc);
if (skb->len < hdrlen) {
printk(KERN_INFO "%s: invalid SKB length %d\n",
@@ -380,19 +381,19 @@
struct iw_quality wstats;
wstats.updated = 0;
- if (rx_stats->mask & IEEE80211_STATMASK_RSSI) {
+ if (rx_stats->mask & LIBIPW_STATMASK_RSSI) {
wstats.level = rx_stats->signal;
wstats.updated |= IW_QUAL_LEVEL_UPDATED;
} else
wstats.updated |= IW_QUAL_LEVEL_INVALID;
- if (rx_stats->mask & IEEE80211_STATMASK_NOISE) {
+ if (rx_stats->mask & LIBIPW_STATMASK_NOISE) {
wstats.noise = rx_stats->noise;
wstats.updated |= IW_QUAL_NOISE_UPDATED;
} else
wstats.updated |= IW_QUAL_NOISE_INVALID;
- if (rx_stats->mask & IEEE80211_STATMASK_SIGNAL) {
+ if (rx_stats->mask & LIBIPW_STATMASK_SIGNAL) {
wstats.qual = rx_stats->signal;
wstats.updated |= IW_QUAL_QUAL_UPDATED;
} else
@@ -411,7 +412,7 @@
if (ieee->iw_mode == IW_MODE_MONITOR) {
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
- ieee80211_monitor_rx(ieee, skb, rx_stats);
+ libipw_monitor_rx(ieee, skb, rx_stats);
return 1;
}
@@ -457,7 +458,7 @@
* frames from other than current BSS, so just drop the
* frames silently instead of filling system log with
* these reports. */
- IEEE80211_DEBUG_DROP("Decryption failed (not set)"
+ LIBIPW_DEBUG_DROP("Decryption failed (not set)"
" (SA=%pM)\n", hdr->addr2);
ieee->ieee_stats.rx_discards_undecryptable++;
goto rx_dropped;
@@ -475,7 +476,7 @@
goto rx_dropped;
}
- if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
+ if (libipw_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
goto rx_dropped;
else
goto rx_exit;
@@ -488,7 +489,7 @@
ieee->prev_seq_ctl = sc;
/* Data frame - extract src/dst addresses */
- if (skb->len < IEEE80211_3ADDR_LEN)
+ if (skb->len < LIBIPW_3ADDR_LEN)
goto rx_dropped;
switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
@@ -501,7 +502,7 @@
memcpy(src, hdr->addr2, ETH_ALEN);
break;
case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
- if (skb->len < IEEE80211_4ADDR_LEN)
+ if (skb->len < LIBIPW_4ADDR_LEN)
goto rx_dropped;
memcpy(dst, hdr->addr3, ETH_ALEN);
memcpy(src, hdr->addr4, ETH_ALEN);
@@ -560,7 +561,7 @@
stype != IEEE80211_STYPE_DATA_CFPOLL &&
stype != IEEE80211_STYPE_DATA_CFACKPOLL) {
if (stype != IEEE80211_STYPE_NULLFUNC)
- IEEE80211_DEBUG_DROP("RX: dropped data frame "
+ LIBIPW_DEBUG_DROP("RX: dropped data frame "
"with no data (type=0x%02x, "
"subtype=0x%02x, len=%d)\n",
type, stype, skb->len);
@@ -570,21 +571,21 @@
/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
if ((fc & IEEE80211_FCTL_PROTECTED) && can_be_decrypted &&
- (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
+ (keyidx = libipw_rx_frame_decrypt(ieee, skb, crypt)) < 0)
goto rx_dropped;
- hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ hdr = (struct libipw_hdr_4addr *)skb->data;
/* skb: hdr + (possibly fragmented) plaintext payload */
// PR: FIXME: hostap has additional conditions in the "if" below:
// ieee->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
if ((frag != 0) || (fc & IEEE80211_FCTL_MOREFRAGS)) {
int flen;
- struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
- IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
+ struct sk_buff *frag_skb = libipw_frag_cache_get(ieee, hdr);
+ LIBIPW_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
if (!frag_skb) {
- IEEE80211_DEBUG(IEEE80211_DL_RX | IEEE80211_DL_FRAG,
+ LIBIPW_DEBUG(LIBIPW_DL_RX | LIBIPW_DL_FRAG,
"Rx cannot get skb from fragment "
"cache (morefrag=%d seq=%u frag=%u)\n",
(fc & IEEE80211_FCTL_MOREFRAGS) != 0,
@@ -600,7 +601,7 @@
printk(KERN_WARNING "%s: host decrypted and "
"reassembled frame did not fit skb\n",
dev->name);
- ieee80211_frag_cache_invalidate(ieee, hdr);
+ libipw_frag_cache_invalidate(ieee, hdr);
goto rx_dropped;
}
@@ -627,24 +628,24 @@
/* this was the last fragment and the frame will be
* delivered, so remove skb from fragment cache */
skb = frag_skb;
- hdr = (struct ieee80211_hdr_4addr *)skb->data;
- ieee80211_frag_cache_invalidate(ieee, hdr);
+ hdr = (struct libipw_hdr_4addr *)skb->data;
+ libipw_frag_cache_invalidate(ieee, hdr);
}
/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
* encrypted/authenticated */
if ((fc & IEEE80211_FCTL_PROTECTED) && can_be_decrypted &&
- ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
+ libipw_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
goto rx_dropped;
- hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ hdr = (struct libipw_hdr_4addr *)skb->data;
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep) {
if ( /*ieee->ieee802_1x && */
- ieee80211_is_eapol_frame(ieee, skb)) {
+ libipw_is_eapol_frame(ieee, skb)) {
/* pass unencrypted EAPOL frames even if encryption is
* configured */
} else {
- IEEE80211_DEBUG_DROP("encryption configured, but RX "
+ LIBIPW_DEBUG_DROP("encryption configured, but RX "
"frame not encrypted (SA=%pM)\n",
hdr->addr2);
goto rx_dropped;
@@ -652,8 +653,8 @@
}
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep &&
- !ieee80211_is_eapol_frame(ieee, skb)) {
- IEEE80211_DEBUG_DROP("dropped unencrypted RX data "
+ !libipw_is_eapol_frame(ieee, skb)) {
+ LIBIPW_DEBUG_DROP("dropped unencrypted RX data "
"frame from %pM (drop_unencrypted=1)\n",
hdr->addr2);
goto rx_dropped;
@@ -736,9 +737,9 @@
/* convert hdr + possible LLC headers into Ethernet header */
if (skb->len - hdrlen >= 8 &&
- ((memcmp(payload, rfc1042_header, SNAP_SIZE) == 0 &&
+ ((memcmp(payload, libipw_rfc1042_header, SNAP_SIZE) == 0 &&
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
- memcmp(payload, bridge_tunnel_header, SNAP_SIZE) == 0)) {
+ memcmp(payload, libipw_bridge_tunnel_header, SNAP_SIZE) == 0)) {
/* remove RFC1042 or Bridge-Tunnel encapsulation and
* replace EtherType */
skb_pull(skb, hdrlen + SNAP_SIZE);
@@ -807,7 +808,7 @@
/* netif_rx always succeeds, but it might drop
* the packet. If it drops the packet, we log that
* in our stats. */
- IEEE80211_DEBUG_DROP
+ LIBIPW_DEBUG_DROP
("RX: netif_rx dropped the packet\n");
dev->stats.rx_dropped++;
}
@@ -829,18 +830,18 @@
return 0;
}
-/* Filter out unrelated packets, call ieee80211_rx[_mgt]
+/* Filter out unrelated packets, call libipw_rx[_mgt]
* This function takes over the skb, it should not be used again after calling
* this function. */
-void ieee80211_rx_any(struct ieee80211_device *ieee,
- struct sk_buff *skb, struct ieee80211_rx_stats *stats)
+void libipw_rx_any(struct libipw_device *ieee,
+ struct sk_buff *skb, struct libipw_rx_stats *stats)
{
- struct ieee80211_hdr_4addr *hdr;
+ struct libipw_hdr_4addr *hdr;
int is_packet_for_us;
u16 fc;
if (ieee->iw_mode == IW_MODE_MONITOR) {
- if (!ieee80211_rx(ieee, skb, stats))
+ if (!libipw_rx(ieee, skb, stats))
dev_kfree_skb_irq(skb);
return;
}
@@ -848,7 +849,7 @@
if (skb->len < sizeof(struct ieee80211_hdr))
goto drop_free;
- hdr = (struct ieee80211_hdr_4addr *)skb->data;
+ hdr = (struct libipw_hdr_4addr *)skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
if ((fc & IEEE80211_FCTL_VERS) != 0)
@@ -856,9 +857,9 @@
switch (fc & IEEE80211_FCTL_FTYPE) {
case IEEE80211_FTYPE_MGMT:
- if (skb->len < sizeof(struct ieee80211_hdr_3addr))
+ if (skb->len < sizeof(struct libipw_hdr_3addr))
goto drop_free;
- ieee80211_rx_mgt(ieee, hdr, stats);
+ libipw_rx_mgt(ieee, hdr, stats);
dev_kfree_skb_irq(skb);
return;
case IEEE80211_FTYPE_DATA:
@@ -910,7 +911,7 @@
}
if (is_packet_for_us)
- if (!ieee80211_rx(ieee, skb, stats))
+ if (!libipw_rx(ieee, skb, stats))
dev_kfree_skb_irq(skb);
return;
@@ -928,7 +929,7 @@
* Make ther structure we read from the beacon packet has
* the right values
*/
-static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
+static int libipw_verify_qos_info(struct libipw_qos_information_element
*info_element, int sub_type)
{
@@ -947,12 +948,12 @@
/*
* Parse a QoS parameter element
*/
-static int ieee80211_read_qos_param_element(struct ieee80211_qos_parameter_info
- *element_param, struct ieee80211_info_element
+static int libipw_read_qos_param_element(struct libipw_qos_parameter_info
+ *element_param, struct libipw_info_element
*info_element)
{
int ret = 0;
- u16 size = sizeof(struct ieee80211_qos_parameter_info) - 2;
+ u16 size = sizeof(struct libipw_qos_parameter_info) - 2;
if ((info_element == NULL) || (element_param == NULL))
return -1;
@@ -965,7 +966,7 @@
} else
ret = -1;
if (ret == 0)
- ret = ieee80211_verify_qos_info(&element_param->info_element,
+ ret = libipw_verify_qos_info(&element_param->info_element,
QOS_OUI_PARAM_SUB_TYPE);
return ret;
}
@@ -973,13 +974,13 @@
/*
* Parse a QoS information element
*/
-static int ieee80211_read_qos_info_element(struct
- ieee80211_qos_information_element
- *element_info, struct ieee80211_info_element
+static int libipw_read_qos_info_element(struct
+ libipw_qos_information_element
+ *element_info, struct libipw_info_element
*info_element)
{
int ret = 0;
- u16 size = sizeof(struct ieee80211_qos_information_element) - 2;
+ u16 size = sizeof(struct libipw_qos_information_element) - 2;
if (element_info == NULL)
return -1;
@@ -995,7 +996,7 @@
ret = -1;
if (ret == 0)
- ret = ieee80211_verify_qos_info(element_info,
+ ret = libipw_verify_qos_info(element_info,
QOS_OUI_INFO_SUB_TYPE);
return ret;
}
@@ -1003,15 +1004,15 @@
/*
* Write QoS parameters from the ac parameters.
*/
-static int ieee80211_qos_convert_ac_to_parameters(struct
- ieee80211_qos_parameter_info
+static int libipw_qos_convert_ac_to_parameters(struct
+ libipw_qos_parameter_info
*param_elm, struct
- ieee80211_qos_parameters
+ libipw_qos_parameters
*qos_param)
{
int rc = 0;
int i;
- struct ieee80211_qos_ac_parameter *ac_params;
+ struct libipw_qos_ac_parameter *ac_params;
u32 txop;
u8 cw_min;
u8 cw_max;
@@ -1042,27 +1043,27 @@
* parameters element. check the information element length to decide
* which type to read
*/
-static int ieee80211_parse_qos_info_param_IE(struct ieee80211_info_element
+static int libipw_parse_qos_info_param_IE(struct libipw_info_element
*info_element,
- struct ieee80211_network *network)
+ struct libipw_network *network)
{
int rc = 0;
- struct ieee80211_qos_parameters *qos_param = NULL;
- struct ieee80211_qos_information_element qos_info_element;
+ struct libipw_qos_parameters *qos_param = NULL;
+ struct libipw_qos_information_element qos_info_element;
- rc = ieee80211_read_qos_info_element(&qos_info_element, info_element);
+ rc = libipw_read_qos_info_element(&qos_info_element, info_element);
if (rc == 0) {
network->qos_data.param_count = qos_info_element.ac_info & 0x0F;
network->flags |= NETWORK_HAS_QOS_INFORMATION;
} else {
- struct ieee80211_qos_parameter_info param_element;
+ struct libipw_qos_parameter_info param_element;
- rc = ieee80211_read_qos_param_element(¶m_element,
+ rc = libipw_read_qos_param_element(¶m_element,
info_element);
if (rc == 0) {
qos_param = &(network->qos_data.parameters);
- ieee80211_qos_convert_ac_to_parameters(¶m_element,
+ libipw_qos_convert_ac_to_parameters(¶m_element,
qos_param);
network->flags |= NETWORK_HAS_QOS_PARAMETERS;
network->qos_data.param_count =
@@ -1071,7 +1072,7 @@
}
if (rc == 0) {
- IEEE80211_DEBUG_QOS("QoS is supported\n");
+ LIBIPW_DEBUG_QOS("QoS is supported\n");
network->qos_data.supported = 1;
}
return rc;
@@ -1116,9 +1117,9 @@
}
#endif
-static int ieee80211_parse_info_param(struct ieee80211_info_element
+static int libipw_parse_info_param(struct libipw_info_element
*info_element, u16 length,
- struct ieee80211_network *network)
+ struct libipw_network *network)
{
DECLARE_SSID_BUF(ssid);
u8 i;
@@ -1129,7 +1130,7 @@
while (length >= sizeof(*info_element)) {
if (sizeof(*info_element) + info_element->len > length) {
- IEEE80211_DEBUG_MGMT("Info elem: parse failed: "
+ LIBIPW_DEBUG_MGMT("Info elem: parse failed: "
"info_element->len + 2 > left : "
"info_element->len+2=%zd left=%d, id=%d.\n",
info_element->len +
@@ -1151,7 +1152,7 @@
memset(network->ssid + network->ssid_len, 0,
IW_ESSID_MAX_SIZE - network->ssid_len);
- IEEE80211_DEBUG_MGMT("WLAN_EID_SSID: '%s' len=%d.\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_SSID: '%s' len=%d.\n",
print_ssid(ssid, network->ssid,
network->ssid_len),
network->ssid_len);
@@ -1170,17 +1171,17 @@
(p - rates_str), "%02X ",
network->rates[i]);
#endif
- if (ieee80211_is_ofdm_rate
+ if (libipw_is_ofdm_rate
(info_element->data[i])) {
network->flags |= NETWORK_HAS_OFDM;
if (info_element->data[i] &
- IEEE80211_BASIC_RATE_MASK)
+ LIBIPW_BASIC_RATE_MASK)
network->flags &=
~NETWORK_HAS_CCK;
}
}
- IEEE80211_DEBUG_MGMT("WLAN_EID_SUPP_RATES: '%s' (%d)\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_SUPP_RATES: '%s' (%d)\n",
rates_str, network->rates_len);
break;
@@ -1197,61 +1198,61 @@
(p - rates_str), "%02X ",
network->rates[i]);
#endif
- if (ieee80211_is_ofdm_rate
+ if (libipw_is_ofdm_rate
(info_element->data[i])) {
network->flags |= NETWORK_HAS_OFDM;
if (info_element->data[i] &
- IEEE80211_BASIC_RATE_MASK)
+ LIBIPW_BASIC_RATE_MASK)
network->flags &=
~NETWORK_HAS_CCK;
}
}
- IEEE80211_DEBUG_MGMT("WLAN_EID_EXT_SUPP_RATES: '%s' (%d)\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_EXT_SUPP_RATES: '%s' (%d)\n",
rates_str, network->rates_ex_len);
break;
case WLAN_EID_DS_PARAMS:
- IEEE80211_DEBUG_MGMT("WLAN_EID_DS_PARAMS: %d\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_DS_PARAMS: %d\n",
info_element->data[0]);
network->channel = info_element->data[0];
break;
case WLAN_EID_FH_PARAMS:
- IEEE80211_DEBUG_MGMT("WLAN_EID_FH_PARAMS: ignored\n");
+ LIBIPW_DEBUG_MGMT("WLAN_EID_FH_PARAMS: ignored\n");
break;
case WLAN_EID_CF_PARAMS:
- IEEE80211_DEBUG_MGMT("WLAN_EID_CF_PARAMS: ignored\n");
+ LIBIPW_DEBUG_MGMT("WLAN_EID_CF_PARAMS: ignored\n");
break;
case WLAN_EID_TIM:
network->tim.tim_count = info_element->data[0];
network->tim.tim_period = info_element->data[1];
- IEEE80211_DEBUG_MGMT("WLAN_EID_TIM: partially ignored\n");
+ LIBIPW_DEBUG_MGMT("WLAN_EID_TIM: partially ignored\n");
break;
case WLAN_EID_ERP_INFO:
network->erp_value = info_element->data[0];
network->flags |= NETWORK_HAS_ERP_VALUE;
- IEEE80211_DEBUG_MGMT("MFIE_TYPE_ERP_SET: %d\n",
+ LIBIPW_DEBUG_MGMT("MFIE_TYPE_ERP_SET: %d\n",
network->erp_value);
break;
case WLAN_EID_IBSS_PARAMS:
network->atim_window = info_element->data[0];
- IEEE80211_DEBUG_MGMT("WLAN_EID_IBSS_PARAMS: %d\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_IBSS_PARAMS: %d\n",
network->atim_window);
break;
case WLAN_EID_CHALLENGE:
- IEEE80211_DEBUG_MGMT("WLAN_EID_CHALLENGE: ignored\n");
+ LIBIPW_DEBUG_MGMT("WLAN_EID_CHALLENGE: ignored\n");
break;
case WLAN_EID_GENERIC:
- IEEE80211_DEBUG_MGMT("WLAN_EID_GENERIC: %d bytes\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_GENERIC: %d bytes\n",
info_element->len);
- if (!ieee80211_parse_qos_info_param_IE(info_element,
+ if (!libipw_parse_qos_info_param_IE(info_element,
network))
break;
@@ -1268,7 +1269,7 @@
break;
case WLAN_EID_RSN:
- IEEE80211_DEBUG_MGMT("WLAN_EID_RSN: %d bytes\n",
+ LIBIPW_DEBUG_MGMT("WLAN_EID_RSN: %d bytes\n",
info_element->len);
network->rsn_ie_len = min(info_element->len + 2,
MAX_WPA_IE_LEN);
@@ -1318,7 +1319,7 @@
break;
default:
- IEEE80211_DEBUG_MGMT
+ LIBIPW_DEBUG_MGMT
("Unsupported info element: %s (%d)\n",
get_info_element_string(info_element->id),
info_element->id);
@@ -1327,20 +1328,20 @@
length -= sizeof(*info_element) + info_element->len;
info_element =
- (struct ieee80211_info_element *)&info_element->
+ (struct libipw_info_element *)&info_element->
data[info_element->len];
}
return 0;
}
-static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct ieee80211_assoc_response
- *frame, struct ieee80211_rx_stats *stats)
+static int libipw_handle_assoc_resp(struct libipw_device *ieee, struct libipw_assoc_response
+ *frame, struct libipw_rx_stats *stats)
{
- struct ieee80211_network network_resp = {
+ struct libipw_network network_resp = {
.ibss_dfs = NULL,
};
- struct ieee80211_network *network = &network_resp;
+ struct libipw_network *network = &network_resp;
struct net_device *dev = ieee->dev;
network->flags = 0;
@@ -1361,7 +1362,7 @@
network->erp_value =
(network->capability & WLAN_CAPABILITY_IBSS) ? 0x3 : 0x0;
- if (stats->freq == IEEE80211_52GHZ_BAND) {
+ if (stats->freq == LIBIPW_52GHZ_BAND) {
/* for A band (No DS info) */
network->channel = stats->received_channel;
} else
@@ -1370,12 +1371,12 @@
network->wpa_ie_len = 0;
network->rsn_ie_len = 0;
- if (ieee80211_parse_info_param
+ if (libipw_parse_info_param
(frame->info_element, stats->len - sizeof(*frame), network))
return 1;
network->mode = 0;
- if (stats->freq == IEEE80211_52GHZ_BAND)
+ if (stats->freq == LIBIPW_52GHZ_BAND)
network->mode = IEEE_A;
else {
if (network->flags & NETWORK_HAS_OFDM)
@@ -1394,10 +1395,10 @@
/***************************************************/
-static int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee80211_probe_response
+static int libipw_network_init(struct libipw_device *ieee, struct libipw_probe_response
*beacon,
- struct ieee80211_network *network,
- struct ieee80211_rx_stats *stats)
+ struct libipw_network *network,
+ struct libipw_rx_stats *stats)
{
DECLARE_SSID_BUF(ssid);
@@ -1423,7 +1424,7 @@
network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ?
0x3 : 0x0;
- if (stats->freq == IEEE80211_52GHZ_BAND) {
+ if (stats->freq == LIBIPW_52GHZ_BAND) {
/* for A band (No DS info) */
network->channel = stats->received_channel;
} else
@@ -1432,12 +1433,12 @@
network->wpa_ie_len = 0;
network->rsn_ie_len = 0;
- if (ieee80211_parse_info_param
+ if (libipw_parse_info_param
(beacon->info_element, stats->len - sizeof(*beacon), network))
return 1;
network->mode = 0;
- if (stats->freq == IEEE80211_52GHZ_BAND)
+ if (stats->freq == LIBIPW_52GHZ_BAND)
network->mode = IEEE_A;
else {
if (network->flags & NETWORK_HAS_OFDM)
@@ -1447,7 +1448,7 @@
}
if (network->mode == 0) {
- IEEE80211_DEBUG_SCAN("Filtered out '%s (%pM)' "
+ LIBIPW_DEBUG_SCAN("Filtered out '%s (%pM)' "
"network.\n",
print_ssid(ssid, network->ssid,
network->ssid_len),
@@ -1460,8 +1461,8 @@
return 0;
}
-static inline int is_same_network(struct ieee80211_network *src,
- struct ieee80211_network *dst)
+static inline int is_same_network(struct libipw_network *src,
+ struct libipw_network *dst)
{
/* A network is only a duplicate if the channel, BSSID, and ESSID
* all match. We treat all <hidden> with the same BSSID and channel
@@ -1472,13 +1473,13 @@
!memcmp(src->ssid, dst->ssid, src->ssid_len));
}
-static void update_network(struct ieee80211_network *dst,
- struct ieee80211_network *src)
+static void update_network(struct libipw_network *dst,
+ struct libipw_network *src)
{
int qos_active;
u8 old_param;
- ieee80211_network_reset(dst);
+ libipw_network_reset(dst);
dst->ibss_dfs = src->ibss_dfs;
/* We only update the statistics if they were created by receiving
@@ -1488,9 +1489,9 @@
* down the signal level of an AP. */
if (dst->channel == src->stats.received_channel)
memcpy(&dst->stats, &src->stats,
- sizeof(struct ieee80211_rx_stats));
+ sizeof(struct libipw_rx_stats));
else
- IEEE80211_DEBUG_SCAN("Network %pM info received "
+ LIBIPW_DEBUG_SCAN("Network %pM info received "
"off channel (%d vs. %d)\n", src->bssid,
dst->channel, src->stats.received_channel);
@@ -1521,7 +1522,7 @@
old_param = dst->qos_data.old_param_count;
if (dst->flags & NETWORK_HAS_QOS_MASK)
memcpy(&dst->qos_data, &src->qos_data,
- sizeof(struct ieee80211_qos_data));
+ sizeof(struct libipw_qos_data));
else {
dst->qos_data.supported = src->qos_data.supported;
dst->qos_data.param_count = src->qos_data.param_count;
@@ -1529,11 +1530,11 @@
if (dst->qos_data.supported == 1) {
if (dst->ssid_len)
- IEEE80211_DEBUG_QOS
+ LIBIPW_DEBUG_QOS
("QoS the network %s is QoS supported\n",
dst->ssid);
else
- IEEE80211_DEBUG_QOS
+ LIBIPW_DEBUG_QOS
("QoS the network is QoS supported\n");
}
dst->qos_data.active = qos_active;
@@ -1547,25 +1548,25 @@
return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
}
-static void ieee80211_process_probe_response(struct ieee80211_device
+static void libipw_process_probe_response(struct libipw_device
*ieee, struct
- ieee80211_probe_response
- *beacon, struct ieee80211_rx_stats
+ libipw_probe_response
+ *beacon, struct libipw_rx_stats
*stats)
{
struct net_device *dev = ieee->dev;
- struct ieee80211_network network = {
+ struct libipw_network network = {
.ibss_dfs = NULL,
};
- struct ieee80211_network *target;
- struct ieee80211_network *oldest = NULL;
+ struct libipw_network *target;
+ struct libipw_network *oldest = NULL;
#ifdef CONFIG_LIBIPW_DEBUG
- struct ieee80211_info_element *info_element = beacon->info_element;
+ struct libipw_info_element *info_element = beacon->info_element;
#endif
unsigned long flags;
DECLARE_SSID_BUF(ssid);
- IEEE80211_DEBUG_SCAN("'%s' (%pM"
+ LIBIPW_DEBUG_SCAN("'%s' (%pM"
"): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
print_ssid(ssid, info_element->data, info_element->len),
beacon->header.addr3,
@@ -1586,8 +1587,8 @@
(beacon->capability & cpu_to_le16(1 << 0x1)) ? '1' : '0',
(beacon->capability & cpu_to_le16(1 << 0x0)) ? '1' : '0');
- if (ieee80211_network_init(ieee, beacon, &network, stats)) {
- IEEE80211_DEBUG_SCAN("Dropped '%s' (%pM) via %s.\n",
+ if (libipw_network_init(ieee, beacon, &network, stats)) {
+ LIBIPW_DEBUG_SCAN("Dropped '%s' (%pM) via %s.\n",
print_ssid(ssid, info_element->data,
info_element->len),
beacon->header.addr3,
@@ -1624,21 +1625,21 @@
/* If there are no more slots, expire the oldest */
list_del(&oldest->list);
target = oldest;
- IEEE80211_DEBUG_SCAN("Expired '%s' (%pM) from "
+ LIBIPW_DEBUG_SCAN("Expired '%s' (%pM) from "
"network list.\n",
print_ssid(ssid, target->ssid,
target->ssid_len),
target->bssid);
- ieee80211_network_reset(target);
+ libipw_network_reset(target);
} else {
/* Otherwise just pull from the free list */
target = list_entry(ieee->network_free_list.next,
- struct ieee80211_network, list);
+ struct libipw_network, list);
list_del(ieee->network_free_list.next);
}
#ifdef CONFIG_LIBIPW_DEBUG
- IEEE80211_DEBUG_SCAN("Adding '%s' (%pM) via %s.\n",
+ LIBIPW_DEBUG_SCAN("Adding '%s' (%pM) via %s.\n",
print_ssid(ssid, network.ssid,
network.ssid_len),
network.bssid,
@@ -1649,7 +1650,7 @@
network.ibss_dfs = NULL;
list_add_tail(&target->list, &ieee->network_list);
} else {
- IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
+ LIBIPW_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
print_ssid(ssid, target->ssid,
target->ssid_len),
target->bssid,
@@ -1670,121 +1671,121 @@
}
}
-void ieee80211_rx_mgt(struct ieee80211_device *ieee,
- struct ieee80211_hdr_4addr *header,
- struct ieee80211_rx_stats *stats)
+void libipw_rx_mgt(struct libipw_device *ieee,
+ struct libipw_hdr_4addr *header,
+ struct libipw_rx_stats *stats)
{
switch (WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl))) {
case IEEE80211_STYPE_ASSOC_RESP:
- IEEE80211_DEBUG_MGMT("received ASSOCIATION RESPONSE (%d)\n",
+ LIBIPW_DEBUG_MGMT("received ASSOCIATION RESPONSE (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
- ieee80211_handle_assoc_resp(ieee,
- (struct ieee80211_assoc_response *)
+ libipw_handle_assoc_resp(ieee,
+ (struct libipw_assoc_response *)
header, stats);
break;
case IEEE80211_STYPE_REASSOC_RESP:
- IEEE80211_DEBUG_MGMT("received REASSOCIATION RESPONSE (%d)\n",
+ LIBIPW_DEBUG_MGMT("received REASSOCIATION RESPONSE (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
break;
case IEEE80211_STYPE_PROBE_REQ:
- IEEE80211_DEBUG_MGMT("received auth (%d)\n",
+ LIBIPW_DEBUG_MGMT("received auth (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
if (ieee->handle_probe_request != NULL)
ieee->handle_probe_request(ieee->dev,
(struct
- ieee80211_probe_request *)
+ libipw_probe_request *)
header, stats);
break;
case IEEE80211_STYPE_PROBE_RESP:
- IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
+ LIBIPW_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
- IEEE80211_DEBUG_SCAN("Probe response\n");
- ieee80211_process_probe_response(ieee,
+ LIBIPW_DEBUG_SCAN("Probe response\n");
+ libipw_process_probe_response(ieee,
(struct
- ieee80211_probe_response *)
+ libipw_probe_response *)
header, stats);
break;
case IEEE80211_STYPE_BEACON:
- IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
+ LIBIPW_DEBUG_MGMT("received BEACON (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
- IEEE80211_DEBUG_SCAN("Beacon\n");
- ieee80211_process_probe_response(ieee,
+ LIBIPW_DEBUG_SCAN("Beacon\n");
+ libipw_process_probe_response(ieee,
(struct
- ieee80211_probe_response *)
+ libipw_probe_response *)
header, stats);
break;
case IEEE80211_STYPE_AUTH:
- IEEE80211_DEBUG_MGMT("received auth (%d)\n",
+ LIBIPW_DEBUG_MGMT("received auth (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
if (ieee->handle_auth != NULL)
ieee->handle_auth(ieee->dev,
- (struct ieee80211_auth *)header);
+ (struct libipw_auth *)header);
break;
case IEEE80211_STYPE_DISASSOC:
if (ieee->handle_disassoc != NULL)
ieee->handle_disassoc(ieee->dev,
- (struct ieee80211_disassoc *)
+ (struct libipw_disassoc *)
header);
break;
case IEEE80211_STYPE_ACTION:
- IEEE80211_DEBUG_MGMT("ACTION\n");
+ LIBIPW_DEBUG_MGMT("ACTION\n");
if (ieee->handle_action)
ieee->handle_action(ieee->dev,
- (struct ieee80211_action *)
+ (struct libipw_action *)
header, stats);
break;
case IEEE80211_STYPE_REASSOC_REQ:
- IEEE80211_DEBUG_MGMT("received reassoc (%d)\n",
+ LIBIPW_DEBUG_MGMT("received reassoc (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
- IEEE80211_DEBUG_MGMT("%s: IEEE80211_REASSOC_REQ received\n",
+ LIBIPW_DEBUG_MGMT("%s: LIBIPW_REASSOC_REQ received\n",
ieee->dev->name);
if (ieee->handle_reassoc_request != NULL)
ieee->handle_reassoc_request(ieee->dev,
- (struct ieee80211_reassoc_request *)
+ (struct libipw_reassoc_request *)
header);
break;
case IEEE80211_STYPE_ASSOC_REQ:
- IEEE80211_DEBUG_MGMT("received assoc (%d)\n",
+ LIBIPW_DEBUG_MGMT("received assoc (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
- IEEE80211_DEBUG_MGMT("%s: IEEE80211_ASSOC_REQ received\n",
+ LIBIPW_DEBUG_MGMT("%s: LIBIPW_ASSOC_REQ received\n",
ieee->dev->name);
if (ieee->handle_assoc_request != NULL)
ieee->handle_assoc_request(ieee->dev);
break;
case IEEE80211_STYPE_DEAUTH:
- IEEE80211_DEBUG_MGMT("DEAUTH\n");
+ LIBIPW_DEBUG_MGMT("DEAUTH\n");
if (ieee->handle_deauth != NULL)
ieee->handle_deauth(ieee->dev,
- (struct ieee80211_deauth *)
+ (struct libipw_deauth *)
header);
break;
default:
- IEEE80211_DEBUG_MGMT("received UNKNOWN (%d)\n",
+ LIBIPW_DEBUG_MGMT("received UNKNOWN (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
- IEEE80211_DEBUG_MGMT("%s: Unknown management packet: %d\n",
+ LIBIPW_DEBUG_MGMT("%s: Unknown management packet: %d\n",
ieee->dev->name,
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
@@ -1792,6 +1793,6 @@
}
}
-EXPORT_SYMBOL_GPL(ieee80211_rx_any);
-EXPORT_SYMBOL(ieee80211_rx_mgt);
-EXPORT_SYMBOL(ieee80211_rx);
+EXPORT_SYMBOL_GPL(libipw_rx_any);
+EXPORT_SYMBOL(libipw_rx_mgt);
+EXPORT_SYMBOL(libipw_rx);
diff --git a/drivers/net/wireless/ipw2x00/libipw_tx.c b/drivers/net/wireless/ipw2x00/libipw_tx.c
index da2ad54..da8beac 100644
--- a/drivers/net/wireless/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_tx.c
@@ -19,7 +19,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
@@ -41,7 +41,7 @@
#include <linux/etherdevice.h>
#include <asm/uaccess.h>
-#include "ieee80211.h"
+#include "libipw.h"
/*
@@ -126,12 +126,12 @@
static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
-static int ieee80211_copy_snap(u8 * data, __be16 h_proto)
+static int libipw_copy_snap(u8 * data, __be16 h_proto)
{
- struct ieee80211_snap_hdr *snap;
+ struct libipw_snap_hdr *snap;
u8 *oui;
- snap = (struct ieee80211_snap_hdr *)data;
+ snap = (struct libipw_snap_hdr *)data;
snap->dsap = 0xaa;
snap->ssap = 0xaa;
snap->ctrl = 0x03;
@@ -149,7 +149,7 @@
return SNAP_SIZE + sizeof(u16);
}
-static int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
+static int libipw_encrypt_fragment(struct libipw_device *ieee,
struct sk_buff *frag, int hdr_len)
{
struct lib80211_crypt_data *crypt =
@@ -177,7 +177,7 @@
return 0;
}
-void ieee80211_txb_free(struct ieee80211_txb *txb)
+void libipw_txb_free(struct libipw_txb *txb)
{
int i;
if (unlikely(!txb))
@@ -188,17 +188,17 @@
kfree(txb);
}
-static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
+static struct libipw_txb *libipw_alloc_txb(int nr_frags, int txb_size,
int headroom, gfp_t gfp_mask)
{
- struct ieee80211_txb *txb;
+ struct libipw_txb *txb;
int i;
- txb = kmalloc(sizeof(struct ieee80211_txb) + (sizeof(u8 *) * nr_frags),
+ txb = kmalloc(sizeof(struct libipw_txb) + (sizeof(u8 *) * nr_frags),
gfp_mask);
if (!txb)
return NULL;
- memset(txb, 0, sizeof(struct ieee80211_txb));
+ memset(txb, 0, sizeof(struct libipw_txb));
txb->nr_frags = nr_frags;
txb->frag_size = txb_size;
@@ -220,7 +220,7 @@
return txb;
}
-static int ieee80211_classify(struct sk_buff *skb)
+static int libipw_classify(struct sk_buff *skb)
{
struct ethhdr *eth;
struct iphdr *ip;
@@ -252,11 +252,11 @@
/* Incoming skb is converted to a txb which consists of
* a block of 802.11 fragment packets (stored as skbs) */
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct ieee80211_device *ieee = netdev_priv(dev);
- struct ieee80211_txb *txb = NULL;
- struct ieee80211_hdr_3addrqos *frag_hdr;
+ struct libipw_device *ieee = netdev_priv(dev);
+ struct libipw_txb *txb = NULL;
+ struct libipw_hdr_3addrqos *frag_hdr;
int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size,
rts_required;
unsigned long flags;
@@ -264,7 +264,7 @@
__be16 ether_type;
int bytes, fc, hdr_len;
struct sk_buff *skb_frag;
- struct ieee80211_hdr_3addrqos header = {/* Ensure zero initialized */
+ struct libipw_hdr_3addrqos header = {/* Ensure zero initialized */
.duration_id = 0,
.seq_ctl = 0,
.qos_ctl = 0
@@ -331,14 +331,14 @@
memcpy(header.addr2, src, ETH_ALEN);
memcpy(header.addr3, ieee->bssid, ETH_ALEN);
}
- hdr_len = IEEE80211_3ADDR_LEN;
+ hdr_len = LIBIPW_3ADDR_LEN;
if (ieee->is_qos_active && ieee->is_qos_active(dev, skb)) {
fc |= IEEE80211_STYPE_QOS_DATA;
hdr_len += 2;
- skb->priority = ieee80211_classify(skb);
- header.qos_ctl |= cpu_to_le16(skb->priority & IEEE80211_QCTL_TID);
+ skb->priority = libipw_classify(skb);
+ header.qos_ctl |= cpu_to_le16(skb->priority & LIBIPW_QCTL_TID);
}
header.frame_ctl = cpu_to_le16(fc);
@@ -362,12 +362,12 @@
skb_reserve(skb_new, crypt->ops->extra_msdu_prefix_len);
memcpy(skb_put(skb_new, hdr_len), &header, hdr_len);
snapped = 1;
- ieee80211_copy_snap(skb_put(skb_new, SNAP_SIZE + sizeof(u16)),
+ libipw_copy_snap(skb_put(skb_new, SNAP_SIZE + sizeof(u16)),
ether_type);
skb_copy_from_linear_data(skb, skb_put(skb_new, skb->len), skb->len);
res = crypt->ops->encrypt_msdu(skb_new, hdr_len, crypt->priv);
if (res < 0) {
- IEEE80211_ERROR("msdu encryption failed\n");
+ LIBIPW_ERROR("msdu encryption failed\n");
dev_kfree_skb_any(skb_new);
goto failed;
}
@@ -393,8 +393,8 @@
* for it when determining the amount of payload space. */
bytes_per_frag = frag_size - hdr_len;
if (ieee->config &
- (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
- bytes_per_frag -= IEEE80211_FCS_LEN;
+ (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
+ bytes_per_frag -= LIBIPW_FCS_LEN;
/* Each fragment may need to have room for encryptiong
* pre/postfix */
@@ -417,14 +417,14 @@
}
rts_required = (frag_size > ieee->rts
- && ieee->config & CFG_IEEE80211_RTS);
+ && ieee->config & CFG_LIBIPW_RTS);
if (rts_required)
nr_frags++;
/* When we allocate the TXB we allocate enough space for the reserve
* and full fragment bytes (bytes_per_frag doesn't include prefix,
* postfix, header, FCS, etc.) */
- txb = ieee80211_alloc_txb(nr_frags, frag_size,
+ txb = libipw_alloc_txb(nr_frags, frag_size,
ieee->tx_headroom, GFP_ATOMIC);
if (unlikely(!txb)) {
printk(KERN_WARNING "%s: Could not allocate TXB\n",
@@ -441,7 +441,7 @@
if (rts_required) {
skb_frag = txb->fragments[0];
frag_hdr =
- (struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
+ (struct libipw_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
/*
* Set header frame_ctl to the RTS.
@@ -456,7 +456,7 @@
header.frame_ctl = cpu_to_le16(fc);
if (ieee->config &
- (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
skb_put(skb_frag, 4);
txb->rts_included = 1;
@@ -472,7 +472,7 @@
crypt->ops->extra_mpdu_prefix_len);
frag_hdr =
- (struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
+ (struct libipw_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
memcpy(frag_hdr, &header, hdr_len);
/* If this is not the last fragment, then add the MOREFRAGS
@@ -487,7 +487,7 @@
}
if (i == 0 && !snapped) {
- ieee80211_copy_snap(skb_put
+ libipw_copy_snap(skb_put
(skb_frag, SNAP_SIZE + sizeof(u16)),
ether_type);
bytes -= SNAP_SIZE + sizeof(u16);
@@ -501,7 +501,7 @@
/* Encryption routine will move the header forward in order
* to insert the IV between the header and the payload */
if (host_encrypt)
- ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
+ libipw_encrypt_fragment(ieee, skb_frag, hdr_len);
else if (host_build_iv) {
atomic_inc(&crypt->refcnt);
if (crypt->ops->build_iv)
@@ -513,7 +513,7 @@
}
if (ieee->config &
- (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
skb_put(skb_frag, 4);
}
@@ -523,17 +523,17 @@
dev_kfree_skb_any(skb);
if (txb) {
- int ret = (*ieee->hard_start_xmit) (txb, dev, priority);
- if (ret == 0) {
+ netdev_tx_t ret = (*ieee->hard_start_xmit)(txb, dev, priority);
+ if (ret == NETDEV_TX_OK) {
dev->stats.tx_packets++;
dev->stats.tx_bytes += txb->payload_size;
- return 0;
+ return NETDEV_TX_OK;
}
- ieee80211_txb_free(txb);
+ libipw_txb_free(txb);
}
- return 0;
+ return NETDEV_TX_OK;
failed:
spin_unlock_irqrestore(&ieee->lock, flags);
@@ -541,6 +541,6 @@
dev->stats.tx_errors++;
return NETDEV_TX_BUSY;
}
-EXPORT_SYMBOL(ieee80211_xmit);
+EXPORT_SYMBOL(libipw_xmit);
-EXPORT_SYMBOL(ieee80211_txb_free);
+EXPORT_SYMBOL(libipw_txb_free);
diff --git a/drivers/net/wireless/ipw2x00/libipw_wx.c b/drivers/net/wireless/ipw2x00/libipw_wx.c
index 3c0812d..4d89f66 100644
--- a/drivers/net/wireless/ipw2x00/libipw_wx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_wx.c
@@ -25,7 +25,7 @@
file called LICENSE.
Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Linux Wireless <ilw@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
@@ -37,9 +37,9 @@
#include <net/lib80211.h>
#include <linux/wireless.h>
-#include "ieee80211.h"
+#include "libipw.h"
-static const char *ieee80211_modes[] = {
+static const char *libipw_modes[] = {
"?", "a", "b", "ab", "g", "ag", "bg", "abg"
};
@@ -54,9 +54,9 @@
}
#define MAX_CUSTOM_LEN 64
-static char *ieee80211_translate_scan(struct ieee80211_device *ieee,
+static char *libipw_translate_scan(struct libipw_device *ieee,
char *start, char *stop,
- struct ieee80211_network *network,
+ struct libipw_network *network,
struct iw_request_info *info)
{
char custom[MAX_CUSTOM_LEN];
@@ -84,7 +84,7 @@
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s",
- ieee80211_modes[network->mode]);
+ libipw_modes[network->mode]);
start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN);
/* Add mode */
@@ -102,7 +102,7 @@
/* Add channel and frequency */
/* Note : userspace automatically computes channel using iwrange */
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel);
+ iwe.u.freq.m = libipw_channel_to_freq(ieee, network->channel);
iwe.u.freq.e = 6;
iwe.u.freq.i = 0;
start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN);
@@ -155,7 +155,7 @@
iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
IW_QUAL_NOISE_UPDATED;
- if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) {
+ if (!(network->stats.mask & LIBIPW_STATMASK_RSSI)) {
iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID |
IW_QUAL_LEVEL_INVALID;
iwe.u.qual.qual = 0;
@@ -180,14 +180,14 @@
iwe.u.qual.qual = 0;
}
- if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) {
+ if (!(network->stats.mask & LIBIPW_STATMASK_NOISE)) {
iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
iwe.u.qual.noise = 0;
} else {
iwe.u.qual.noise = network->stats.noise;
}
- if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) {
+ if (!(network->stats.mask & LIBIPW_STATMASK_SIGNAL)) {
iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
iwe.u.qual.level = 0;
} else {
@@ -237,14 +237,14 @@
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Channel flags: ");
- if (ieee80211_get_channel_flags(ieee, network->channel) &
- IEEE80211_CH_INVALID) {
+ if (libipw_get_channel_flags(ieee, network->channel) &
+ LIBIPW_CH_INVALID) {
iwe.cmd = IWEVCUSTOM;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "INVALID ");
}
- if (ieee80211_get_channel_flags(ieee, network->channel) &
- IEEE80211_CH_RADAR_DETECT) {
+ if (libipw_get_channel_flags(ieee, network->channel) &
+ LIBIPW_CH_RADAR_DETECT) {
iwe.cmd = IWEVCUSTOM;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), "DFS ");
}
@@ -259,11 +259,11 @@
#define SCAN_ITEM_SIZE 128
-int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+int libipw_wx_get_scan(struct libipw_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct ieee80211_network *network;
+ struct libipw_network *network;
unsigned long flags;
int err = 0;
@@ -272,7 +272,7 @@
int i = 0;
DECLARE_SSID_BUF(ssid);
- IEEE80211_DEBUG_WX("Getting scan\n");
+ LIBIPW_DEBUG_WX("Getting scan\n");
spin_lock_irqsave(&ieee->lock, flags);
@@ -285,10 +285,10 @@
if (ieee->scan_age == 0 ||
time_after(network->last_scanned + ieee->scan_age, jiffies))
- ev = ieee80211_translate_scan(ieee, ev, stop, network,
+ ev = libipw_translate_scan(ieee, ev, stop, network,
info);
else {
- IEEE80211_DEBUG_SCAN("Not showing network '%s ("
+ LIBIPW_DEBUG_SCAN("Not showing network '%s ("
"%pM)' due to age (%ums).\n",
print_ssid(ssid, network->ssid,
network->ssid_len),
@@ -303,18 +303,18 @@
wrqu->data.length = ev - extra;
wrqu->data.flags = 0;
- IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
+ LIBIPW_DEBUG_WX("exit: %d networks returned.\n", i);
return err;
}
-int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+int libipw_wx_set_encode(struct libipw_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *keybuf)
{
struct iw_point *erq = &(wrqu->encoding);
struct net_device *dev = ieee->dev;
- struct ieee80211_security sec = {
+ struct libipw_security sec = {
.flags = 0
};
int i, key, key_provided, len;
@@ -322,7 +322,7 @@
int host_crypto = ieee->host_encrypt || ieee->host_decrypt || ieee->host_build_iv;
DECLARE_SSID_BUF(ssid);
- IEEE80211_DEBUG_WX("SET_ENCODE\n");
+ LIBIPW_DEBUG_WX("SET_ENCODE\n");
key = erq->flags & IW_ENCODE_INDEX;
if (key) {
@@ -335,18 +335,18 @@
key = ieee->crypt_info.tx_keyidx;
}
- IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
+ LIBIPW_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
"provided" : "default");
crypt = &ieee->crypt_info.crypt[key];
if (erq->flags & IW_ENCODE_DISABLED) {
if (key_provided && *crypt) {
- IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
+ LIBIPW_DEBUG_WX("Disabling encryption on key %d.\n",
key);
lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
} else
- IEEE80211_DEBUG_WX("Disabling encryption.\n");
+ LIBIPW_DEBUG_WX("Disabling encryption.\n");
/* Check all the keys to see if any are still configured,
* and if no key index was provided, de-init them all */
@@ -410,7 +410,7 @@
/* If a new key was provided, set it up */
if (erq->length > 0) {
-#ifdef CONFIG_IEEE80211_DEBUG
+#ifdef CONFIG_LIBIPW_DEBUG
DECLARE_SSID_BUF(ssid);
#endif
@@ -419,7 +419,7 @@
if (len > erq->length)
memset(sec.keys[key] + erq->length, 0,
len - erq->length);
- IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
+ LIBIPW_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
key, print_ssid(ssid, sec.keys[key], len),
erq->length, len);
sec.key_sizes[key] = len;
@@ -438,7 +438,7 @@
NULL, (*crypt)->priv);
if (len == 0) {
/* Set a default key of all 0 */
- IEEE80211_DEBUG_WX("Setting key %d to all "
+ LIBIPW_DEBUG_WX("Setting key %d to all "
"zero.\n", key);
memset(sec.keys[key], 0, 13);
(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
@@ -449,7 +449,7 @@
}
/* No key data - just set the default TX key index */
if (key_provided) {
- IEEE80211_DEBUG_WX("Setting key %d to default Tx "
+ LIBIPW_DEBUG_WX("Setting key %d to default Tx "
"key.\n", key);
ieee->crypt_info.tx_keyidx = key;
sec.active_key = key;
@@ -461,7 +461,7 @@
sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN :
WLAN_AUTH_SHARED_KEY;
sec.flags |= SEC_AUTH_MODE;
- IEEE80211_DEBUG_WX("Auth: %s\n",
+ LIBIPW_DEBUG_WX("Auth: %s\n",
sec.auth_mode == WLAN_AUTH_OPEN ?
"OPEN" : "SHARED KEY");
}
@@ -490,16 +490,16 @@
return 0;
}
-int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+int libipw_wx_get_encode(struct libipw_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *keybuf)
{
struct iw_point *erq = &(wrqu->encoding);
int len, key;
struct lib80211_crypt_data *crypt;
- struct ieee80211_security *sec = &ieee->sec;
+ struct libipw_security *sec = &ieee->sec;
- IEEE80211_DEBUG_WX("GET_ENCODE\n");
+ LIBIPW_DEBUG_WX("GET_ENCODE\n");
key = erq->flags & IW_ENCODE_INDEX;
if (key) {
@@ -532,7 +532,7 @@
return 0;
}
-int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
+int libipw_wx_set_encodeext(struct libipw_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
@@ -545,7 +545,7 @@
struct lib80211_crypto_ops *ops;
struct lib80211_crypt_data **crypt;
- struct ieee80211_security sec = {
+ struct libipw_security sec = {
.flags = 0,
};
@@ -611,7 +611,7 @@
module = "lib80211_crypt_ccmp";
break;
default:
- IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ LIBIPW_DEBUG_WX("%s: unknown crypto alg %d\n",
dev->name, ext->alg);
ret = -EINVAL;
goto done;
@@ -623,7 +623,7 @@
ops = lib80211_get_crypto_ops(alg);
}
if (ops == NULL) {
- IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ LIBIPW_DEBUG_WX("%s: unknown crypto alg %d\n",
dev->name, ext->alg);
ret = -EINVAL;
goto done;
@@ -653,7 +653,7 @@
if (ext->key_len > 0 && (*crypt)->ops->set_key &&
(*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
(*crypt)->priv) < 0) {
- IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
+ LIBIPW_DEBUG_WX("%s: key setting failed\n", dev->name);
ret = -EINVAL;
goto done;
}
@@ -700,20 +700,20 @@
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port && ieee->reset_port(dev)) {
- IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
+ LIBIPW_DEBUG_WX("%s: reset_port failed\n", dev->name);
return -EINVAL;
}
return ret;
}
-int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
+int libipw_wx_get_encodeext(struct libipw_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct iw_point *encoding = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- struct ieee80211_security *sec = &ieee->sec;
+ struct libipw_security *sec = &ieee->sec;
int idx, max_key_len;
max_key_len = encoding->length - sizeof(*ext);
@@ -763,9 +763,9 @@
return 0;
}
-EXPORT_SYMBOL(ieee80211_wx_set_encodeext);
-EXPORT_SYMBOL(ieee80211_wx_get_encodeext);
+EXPORT_SYMBOL(libipw_wx_set_encodeext);
+EXPORT_SYMBOL(libipw_wx_get_encodeext);
-EXPORT_SYMBOL(ieee80211_wx_get_scan);
-EXPORT_SYMBOL(ieee80211_wx_set_encode);
-EXPORT_SYMBOL(ieee80211_wx_get_encode);
+EXPORT_SYMBOL(libipw_wx_get_scan);
+EXPORT_SYMBOL(libipw_wx_set_encode);
+EXPORT_SYMBOL(libipw_wx_get_encode);
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index e092af0..99310c0 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -9,6 +9,9 @@
config IWLWIFI_LEDS
bool "Enable LED support in iwlagn and iwl3945 drivers"
depends on IWLWIFI
+ default y
+ ---help---
+ Select this if you want LED support.
config IWLWIFI_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwlagn driver"
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 7da52f1..a95caa0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -46,7 +46,7 @@
#include "iwl-5000-hw.h"
/* Highest firmware API version supported */
-#define IWL1000_UCODE_API_MAX 2
+#define IWL1000_UCODE_API_MAX 3
/* Lowest firmware API version supported */
#define IWL1000_UCODE_API_MIN 1
@@ -55,19 +55,109 @@
#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
+
+/*
+ * For 1000, use advance thermal throttling critical temperature threshold,
+ * but legacy thermal management implementation for now.
+ * This is for the reason of 1000 uCode using advance thermal throttling API
+ * but not implement ct_kill_exit based on ct_kill exit temperature
+ * so the thermal throttling will still based on legacy thermal throttling
+ * management.
+ * The code here need to be modified once 1000 uCode has the advanced thermal
+ * throttling algorithm in place
+ */
+static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 1000 series */
+static void iwl1000_nic_config(struct iwl_priv *priv)
+{
+ iwl5000_nic_config(priv);
+
+ /* Setting digital SVR for 1000 card to 1.32V */
+ /* locking is acquired in iwl_set_bits_mask_prph() function */
+ iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
+ APMG_SVR_DIGITAL_VOLTAGE_1_32,
+ ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+}
+
+static struct iwl_lib_ops iwl1000_lib = {
+ .set_hw_params = iwl5000_hw_set_hw_params,
+ .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
+ .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
+ .txq_set_sched = iwl5000_txq_set_sched,
+ .txq_agg_enable = iwl5000_txq_agg_enable,
+ .txq_agg_disable = iwl5000_txq_agg_disable,
+ .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = iwl_hw_txq_free_tfd,
+ .txq_init = iwl_hw_tx_queue_init,
+ .rx_handler_setup = iwl5000_rx_handler_setup,
+ .setup_deferred_work = iwl5000_setup_deferred_work,
+ .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+ .load_ucode = iwl5000_load_ucode,
+ .init_alive_start = iwl5000_init_alive_start,
+ .alive_notify = iwl5000_alive_notify,
+ .send_tx_power = iwl5000_send_tx_power,
+ .update_chain_flags = iwl_update_chain_flags,
+ .apm_ops = {
+ .init = iwl5000_apm_init,
+ .reset = iwl5000_apm_reset,
+ .stop = iwl5000_apm_stop,
+ .config = iwl1000_nic_config,
+ .set_pwr_src = iwl_set_pwr_src,
+ },
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_5000_REG_BAND_1_CHANNELS,
+ EEPROM_5000_REG_BAND_2_CHANNELS,
+ EEPROM_5000_REG_BAND_3_CHANNELS,
+ EEPROM_5000_REG_BAND_4_CHANNELS,
+ EEPROM_5000_REG_BAND_5_CHANNELS,
+ EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_5000_REG_BAND_52_HT40_CHANNELS
+ },
+ .verify_signature = iwlcore_eeprom_verify_signature,
+ .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+ .release_semaphore = iwlcore_eeprom_release_semaphore,
+ .calib_version = iwl5000_eeprom_calib_version,
+ .query_addr = iwl5000_eeprom_query_addr,
+ },
+ .post_associate = iwl_post_associate,
+ .isr = iwl_isr_ict,
+ .config_ap = iwl_config_ap,
+ .temp_ops = {
+ .temperature = iwl5000_temperature,
+ .set_ct_kill = iwl1000_set_ct_threshold,
+ },
+};
+
+static struct iwl_ops iwl1000_ops = {
+ .ucode = &iwl5000_ucode,
+ .lib = &iwl1000_lib,
+ .hcmd = &iwl5000_hcmd,
+ .utils = &iwl5000_hcmd_utils,
+};
+
struct iwl_cfg iwl1000_bgn_cfg = {
.name = "1000 Series BGN",
.fw_name_pre = IWL1000_FW_PRE,
.ucode_api_max = IWL1000_UCODE_API_MAX,
.ucode_api_min = IWL1000_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
- .ops = &iwl5000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .ops = &iwl1000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .max_ll_items = OTP_MAX_LL_ITEMS_1000,
+ .shadow_ram_support = false,
+ .ht_greenfield_support = true,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
index 73f93a0..1677278 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
@@ -176,7 +176,7 @@
* in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
* txpower (MSB).
*
- * Entries immediately below are for 20 MHz channel width. FAT (40 MHz)
+ * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
* channels (only for 4965, not supported by 3945) appear later in the EEPROM.
*
* 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
@@ -232,9 +232,8 @@
#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */
#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */
-#define TFD_QUEUE_MIN 0
-#define TFD_QUEUE_MAX 5 /* 4 DATA + 1 CMD */
-
+/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
+#define IWL39_NUM_QUEUES 5
#define IWL_NUM_SCAN_RATES (2)
#define IWL_DEFAULT_TX_RETRY 15
@@ -280,8 +279,6 @@
/* Size of uCode instruction memory in bootstrap state machine */
#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE
-#define IWL39_MAX_NUM_QUEUES 8
-
static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr)
{
return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index 225e5f8..8c29ded 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -79,11 +79,10 @@
#define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /*Exclude Solid on*/
#define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1)
-static int iwl3945_led_cmd_callback(struct iwl_priv *priv,
- struct iwl_cmd *cmd,
- struct sk_buff *skb)
+static void iwl3945_led_cmd_callback(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb)
{
- return 1;
}
static inline int iwl3945_brightness_to_idx(enum led_brightness brightness)
@@ -99,8 +98,8 @@
.id = REPLY_LEDS_CMD,
.len = sizeof(struct iwl_led_cmd),
.data = led_cmd,
- .meta.flags = CMD_ASYNC,
- .meta.u.callback = iwl3945_led_cmd_callback,
+ .flags = CMD_ASYNC,
+ .callback = iwl3945_led_cmd_callback,
};
return iwl_send_cmd(priv, &cmd);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 5eb538d..a16bd41 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -673,33 +673,17 @@
s8 scale_action = 0;
unsigned long flags;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- u16 fc;
- u16 rate_mask = 0;
+ u16 rate_mask = sta ? sta->supp_rates[sband->band] : 0;
s8 max_rate_idx = -1;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
IWL_DEBUG_RATE(priv, "enter\n");
- if (sta)
- rate_mask = sta->supp_rates[sband->band];
-
- /* Send management frames and NO_ACK data using lowest rate. */
- fc = le16_to_cpu(hdr->frame_control);
- if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- info->flags & IEEE80211_TX_CTL_NO_ACK ||
- !sta || !priv_sta) {
- IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
- if (!rate_mask)
- info->control.rates[0].idx =
- rate_lowest_index(sband, NULL);
- else
- info->control.rates[0].idx =
- rate_lowest_index(sband, sta);
- if (info->flags & IEEE80211_TX_CTL_NO_ACK)
- info->control.rates[0].count = 1;
+ if (rate_control_send_low(sta, priv_sta, txrc))
return;
- }
+
+ rate_mask = sta->supp_rates[sband->band];
/* get user max rate if set */
max_rate_idx = txrc->max_rate_idx;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 46288e7..e9a685d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -349,12 +349,13 @@
*
*****************************************************************************/
-void iwl3945_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
+void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
(int)sizeof(struct iwl3945_notif_statistics),
- le32_to_cpu(pkt->len));
+ le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
memcpy(&priv->statistics_39, pkt->u.raw, sizeof(priv->statistics_39));
@@ -509,7 +510,7 @@
struct iwl_rx_packet *pkt,
struct ieee80211_hdr *header, int group100)
{
- if (priv->debug_level & IWL_DL_RX)
+ if (iwl_get_debug_level(priv) & IWL_DL_RX)
_iwl3945_dbg_report_frame(priv, pkt, header, group100);
}
@@ -544,9 +545,7 @@
struct ieee80211_rx_status *stats)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-#ifdef CONFIG_IWLWIFI_LEDS
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
-#endif
struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
short len = le16_to_cpu(rx_hdr->len);
@@ -577,7 +576,10 @@
if (ieee80211_is_data(hdr->frame_control))
priv->rxtxpackets += len;
#endif
- ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
+ iwl_update_stats(priv, false, hdr->frame_control, len);
+
+ memcpy(IEEE80211_SKB_RXCB(rxb->skb), stats, sizeof(*stats));
+ ieee80211_rx_irqsafe(priv->hw, rxb->skb);
rxb->skb = NULL;
}
@@ -678,6 +680,7 @@
/* Set "1" to report good data frames in groups of 100 */
iwl3945_dbg_report_frame(priv, pkt, header, 1);
+ iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
if (network_packet) {
priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
@@ -748,8 +751,8 @@
/* Unmap tx_cmd */
if (counter)
pci_unmap_single(dev,
- pci_unmap_addr(&txq->cmd[index]->meta, mapping),
- pci_unmap_len(&txq->cmd[index]->meta, len),
+ pci_unmap_addr(&txq->meta[index], mapping),
+ pci_unmap_len(&txq->meta[index], len),
PCI_DMA_TODEVICE);
/* unmap chunks if any */
@@ -773,9 +776,11 @@
* iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
*
*/
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, struct iwl_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr, int sta_id, int tx_id)
+void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr,
+ int sta_id, int tx_id)
{
u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
@@ -962,7 +967,7 @@
goto error;
/* Tx queue(s) */
- for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) {
+ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
@@ -1139,7 +1144,7 @@
int txq_id;
/* Tx queues */
- for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++)
+ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
if (txq_id == IWL_CMD_QUEUE_NUM)
iwl_cmd_queue_free(priv);
else
@@ -1155,7 +1160,7 @@
iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
/* reset TFD queues */
- for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) {
+ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
@@ -1857,7 +1862,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_RXON_ASSOC,
.len = sizeof(rxon_assoc),
- .meta.flags = CMD_WANT_SKB,
+ .flags = CMD_WANT_SKB,
.data = &rxon_assoc,
};
const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
@@ -1881,14 +1886,14 @@
if (rc)
return rc;
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ res = (struct iwl_rx_packet *)cmd.reply_skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
rc = -EIO;
}
priv->alloc_rxb_skb--;
- dev_kfree_skb_any(cmd.meta.u.skb);
+ dev_kfree_skb_any(cmd.reply_skb);
return rc;
}
@@ -1986,7 +1991,7 @@
staging_rxon->reserved4 = 0;
staging_rxon->reserved5 = 0;
- iwl_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
+ iwl_set_rxon_hwcrypto(priv, !iwl3945_mod_params.sw_crypto);
/* Apply the new configuration */
rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
@@ -2551,7 +2556,7 @@
}
/* Assign number of Usable TX queues */
- priv->hw_params.max_txq_num = TFD_QUEUE_MAX;
+ priv->hw_params.max_txq_num = IWL39_NUM_QUEUES;
priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_3K;
@@ -2562,6 +2567,7 @@
priv->hw_params.bcast_sta_id = IWL3945_BROADCAST_ID;
priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
+ priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
return 0;
}
@@ -2784,11 +2790,50 @@
return 0;
}
+#define IWL3945_UCODE_GET(item) \
+static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode,\
+ u32 api_ver) \
+{ \
+ return le32_to_cpu(ucode->u.v1.item); \
+}
+
+static u32 iwl3945_ucode_get_header_size(u32 api_ver)
+{
+ return UCODE_HEADER_SIZE(1);
+}
+static u32 iwl3945_ucode_get_build(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return 0;
+}
+static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return (u8 *) ucode->u.v1.data;
+}
+
+IWL3945_UCODE_GET(inst_size);
+IWL3945_UCODE_GET(data_size);
+IWL3945_UCODE_GET(init_size);
+IWL3945_UCODE_GET(init_data_size);
+IWL3945_UCODE_GET(boot_size);
+
static struct iwl_hcmd_ops iwl3945_hcmd = {
.rxon_assoc = iwl3945_send_rxon_assoc,
.commit_rxon = iwl3945_commit_rxon,
};
+static struct iwl_ucode_ops iwl3945_ucode = {
+ .get_header_size = iwl3945_ucode_get_header_size,
+ .get_build = iwl3945_ucode_get_build,
+ .get_inst_size = iwl3945_ucode_get_inst_size,
+ .get_data_size = iwl3945_ucode_get_data_size,
+ .get_init_size = iwl3945_ucode_get_init_size,
+ .get_init_data_size = iwl3945_ucode_get_init_data_size,
+ .get_boot_size = iwl3945_ucode_get_boot_size,
+ .get_data = iwl3945_ucode_get_data,
+};
+
static struct iwl_lib_ops iwl3945_lib = {
.txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl3945_hw_txq_free_tfd,
@@ -2808,8 +2853,8 @@
EEPROM_REGULATORY_BAND_3_CHANNELS,
EEPROM_REGULATORY_BAND_4_CHANNELS,
EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_FAT,
- EEPROM_REGULATORY_BAND_NO_FAT,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ EEPROM_REGULATORY_BAND_NO_HT40,
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
@@ -2829,6 +2874,7 @@
};
static struct iwl_ops iwl3945_ops = {
+ .ucode = &iwl3945_ucode,
.lib = &iwl3945_lib,
.hcmd = &iwl3945_hcmd,
.utils = &iwl3945_hcmd_utils,
@@ -2844,7 +2890,8 @@
.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
.ops = &iwl3945_ops,
.mod_params = &iwl3945_mod_params,
- .use_isr_legacy = true
+ .use_isr_legacy = true,
+ .ht_greenfield_support = false,
};
static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2857,7 +2904,8 @@
.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
.ops = &iwl3945_ops,
.mod_params = &iwl3945_mod_params,
- .use_isr_legacy = true
+ .use_isr_legacy = true,
+ .ht_greenfield_support = false,
};
struct pci_device_id iwl3945_hw_card_ids[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 2de6471..f240369 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -111,9 +111,6 @@
#define IWL_TX_FIFO_HCCA_2 6
#define IWL_TX_FIFO_NONE 7
-/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL39_MIN_NUM_QUEUES 4
-
#define IEEE80211_DATA_LEN 2304
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
@@ -257,10 +254,11 @@
struct iwl_tx_queue *txq);
extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
struct iwl3945_frame *frame, u8 rate);
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, struct iwl_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr,
- int sta_id, int tx_id);
+void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr,
+ int sta_id, int tx_id);
extern int iwl3945_hw_reg_send_txpower(struct iwl_priv *priv);
extern int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power);
extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
index a71a489..b34322a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -188,7 +188,7 @@
*
* 1) Regulatory information (max txpower and channel usage flags) is provided
* separately for each channel that can possibly supported by 4965.
- * 40 MHz wide (.11n fat) channels are listed separately from 20 MHz
+ * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz
* (legacy) channels.
*
* See struct iwl4965_eeprom_channel for format, and struct iwl4965_eeprom
@@ -251,8 +251,8 @@
* no reduction (such as with regulatory txpower limits) is required.
*
* Saturation and Backoff values apply equally to 20 Mhz (legacy) channel
- * widths and 40 Mhz (.11n fat) channel widths; there is no separate
- * factory measurement for fat channels.
+ * widths and 40 Mhz (.11n HT40) channel widths; there is no separate
+ * factory measurement for ht40 channels.
*
* The result of this step is the final target txpower. The rest of
* the steps figure out the proper settings for the device to achieve
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 8f3d4bc..6a13bfb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -46,7 +46,7 @@
#include "iwl-sta.h"
static int iwl4965_send_tx_power(struct iwl_priv *priv);
-static int iwl4965_hw_get_temperature(const struct iwl_priv *priv);
+static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
/* Highest firmware API version supported */
#define IWL4965_UCODE_API_MAX 2
@@ -293,7 +293,7 @@
queue_work(priv->workqueue, &priv->restart);
}
-static bool is_fat_channel(__le32 rxon_flags)
+static bool is_ht40_channel(__le32 rxon_flags)
{
int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
>> RXON_FLG_CHANNEL_MODE_POS;
@@ -728,7 +728,7 @@
static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
.min_nrg_cck = 97,
- .max_nrg_cck = 0,
+ .max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 85,
.auto_corr_min_ofdm_mrc = 170,
@@ -752,7 +752,8 @@
static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
{
/* want Kelvin */
- priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
+ priv->hw_params.ct_kill_threshold =
+ CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
}
/**
@@ -781,7 +782,7 @@
priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
- priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
@@ -1241,7 +1242,7 @@
};
static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
- u8 is_fat, u8 ctrl_chan_high,
+ u8 is_ht40, u8 ctrl_chan_high,
struct iwl4965_tx_power_db *tx_power_tbl)
{
u8 saturation_power;
@@ -1273,8 +1274,8 @@
user_target_power = 2 * priv->tx_power_user_lmt;
/* Get current (RXON) channel, band, width */
- IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_fat %d\n", channel, band,
- is_fat);
+ IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band,
+ is_ht40);
ch_info = iwl_get_channel_info(priv, priv->band, channel);
@@ -1293,7 +1294,7 @@
IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n",
channel, txatten_grp);
- if (is_fat) {
+ if (is_ht40) {
if (ctrl_chan_high)
channel -= 2;
else
@@ -1317,8 +1318,8 @@
/* regulatory txpower limits ... reg_limit values are in half-dBm,
* max_power_avg values are in dBm, convert * 2 */
- if (is_fat)
- reg_limit = ch_info->fat_max_power_avg * 2;
+ if (is_ht40)
+ reg_limit = ch_info->ht40_max_power_avg * 2;
else
reg_limit = ch_info->max_power_avg * 2;
@@ -1484,7 +1485,7 @@
/**
* iwl4965_send_tx_power - Configure the TXPOWER level user limit
*
- * Uses the active RXON for channel, band, and characteristics (fat, high)
+ * Uses the active RXON for channel, band, and characteristics (ht40, high)
* The power limit is taken from priv->tx_power_user_lmt.
*/
static int iwl4965_send_tx_power(struct iwl_priv *priv)
@@ -1492,7 +1493,7 @@
struct iwl4965_txpowertable_cmd cmd = { 0 };
int ret;
u8 band = 0;
- bool is_fat = false;
+ bool is_ht40 = false;
u8 ctrl_chan_high = 0;
if (test_bit(STATUS_SCANNING, &priv->status)) {
@@ -1505,9 +1506,9 @@
band = priv->band == IEEE80211_BAND_2GHZ;
- is_fat = is_fat_channel(priv->active_rxon.flags);
+ is_ht40 = is_ht40_channel(priv->active_rxon.flags);
- if (is_fat &&
+ if (is_ht40 &&
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
@@ -1516,7 +1517,7 @@
ret = iwl4965_fill_txpower_tbl(priv, band,
le16_to_cpu(priv->active_rxon.channel),
- is_fat, ctrl_chan_high, &cmd.tx_power);
+ is_ht40, ctrl_chan_high, &cmd.tx_power);
if (ret)
goto out;
@@ -1570,7 +1571,7 @@
{
int rc;
u8 band = 0;
- bool is_fat = false;
+ bool is_ht40 = false;
u8 ctrl_chan_high = 0;
struct iwl4965_channel_switch_cmd cmd = { 0 };
const struct iwl_channel_info *ch_info;
@@ -1579,9 +1580,9 @@
ch_info = iwl_get_channel_info(priv, priv->band, channel);
- is_fat = is_fat_channel(priv->staging_rxon.flags);
+ is_ht40 = is_ht40_channel(priv->staging_rxon.flags);
- if (is_fat &&
+ if (is_ht40 &&
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
@@ -1596,7 +1597,7 @@
else
cmd.expect_beacon = 1;
- rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
+ rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_ht40,
ctrl_chan_high, &cmd.tx_power);
if (rc) {
IWL_DEBUG_11H(priv, "error:%d fill txpower_tbl\n", rc);
@@ -1655,7 +1656,7 @@
*
* A return of <0 indicates bogus data in the statistics
*/
-static int iwl4965_hw_get_temperature(const struct iwl_priv *priv)
+static int iwl4965_hw_get_temperature(struct iwl_priv *priv)
{
s32 temperature;
s32 vt;
@@ -1663,8 +1664,8 @@
u32 R4;
if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
- (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
- IWL_DEBUG_TEMP(priv, "Running FAT temperature calibration\n");
+ (priv->statistics.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
+ IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n");
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
@@ -1772,6 +1773,7 @@
}
priv->temperature = temp;
+ iwl_tt_handler(priv);
set_bit(STATUS_TEMPERATURE, &priv->status);
if (!priv->disable_tx_power_cal &&
@@ -2221,12 +2223,50 @@
cancel_work_sync(&priv->txpower_work);
}
+#define IWL4965_UCODE_GET(item) \
+static u32 iwl4965_ucode_get_##item(const struct iwl_ucode_header *ucode,\
+ u32 api_ver) \
+{ \
+ return le32_to_cpu(ucode->u.v1.item); \
+}
+
+static u32 iwl4965_ucode_get_header_size(u32 api_ver)
+{
+ return UCODE_HEADER_SIZE(1);
+}
+static u32 iwl4965_ucode_get_build(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return 0;
+}
+static u8 *iwl4965_ucode_get_data(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return (u8 *) ucode->u.v1.data;
+}
+
+IWL4965_UCODE_GET(inst_size);
+IWL4965_UCODE_GET(data_size);
+IWL4965_UCODE_GET(init_size);
+IWL4965_UCODE_GET(init_data_size);
+IWL4965_UCODE_GET(boot_size);
+
static struct iwl_hcmd_ops iwl4965_hcmd = {
.rxon_assoc = iwl4965_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
.set_rxon_chain = iwl_set_rxon_chain,
};
+static struct iwl_ucode_ops iwl4965_ucode = {
+ .get_header_size = iwl4965_ucode_get_header_size,
+ .get_build = iwl4965_ucode_get_build,
+ .get_inst_size = iwl4965_ucode_get_inst_size,
+ .get_data_size = iwl4965_ucode_get_data_size,
+ .get_init_size = iwl4965_ucode_get_init_size,
+ .get_init_data_size = iwl4965_ucode_get_init_data_size,
+ .get_boot_size = iwl4965_ucode_get_boot_size,
+ .get_data = iwl4965_ucode_get_data,
+};
static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
.get_hcmd_size = iwl4965_get_hcmd_size,
.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
@@ -2266,8 +2306,8 @@
EEPROM_REGULATORY_BAND_3_CHANNELS,
EEPROM_REGULATORY_BAND_4_CHANNELS,
EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS
+ EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
+ EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
@@ -2287,6 +2327,7 @@
};
static struct iwl_ops iwl4965_ops = {
+ .ucode = &iwl4965_ucode,
.lib = &iwl4965_lib,
.hcmd = &iwl4965_hcmd,
.utils = &iwl4965_hcmd_utils,
@@ -2303,7 +2344,8 @@
.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
.ops = &iwl4965_ops,
.mod_params = &iwl4965_mod_params,
- .use_isr_legacy = true
+ .use_isr_legacy = true,
+ .ht_greenfield_support = false,
};
/* Module firmware */
@@ -2313,8 +2355,6 @@
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
-MODULE_PARM_DESC(debug, "debug output mask");
module_param_named(
disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index b3c648c..1d539e3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -91,7 +91,7 @@
}
-static int iwl5000_apm_init(struct iwl_priv *priv)
+int iwl5000_apm_init(struct iwl_priv *priv)
{
int ret = 0;
@@ -137,7 +137,7 @@
}
/* FIXME: this is identical to 4965 */
-static void iwl5000_apm_stop(struct iwl_priv *priv)
+void iwl5000_apm_stop(struct iwl_priv *priv)
{
unsigned long flags;
@@ -156,7 +156,7 @@
}
-static int iwl5000_apm_reset(struct iwl_priv *priv)
+int iwl5000_apm_reset(struct iwl_priv *priv)
{
int ret = 0;
@@ -198,7 +198,8 @@
}
-static void iwl5000_nic_config(struct iwl_priv *priv)
+/* NIC configuration for 5000 series and up */
+void iwl5000_nic_config(struct iwl_priv *priv)
{
unsigned long flags;
u16 radio_cfg;
@@ -239,11 +240,11 @@
APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+
spin_unlock_irqrestore(&priv->lock, flags);
}
-
/*
* EEPROM
*/
@@ -283,7 +284,7 @@
return (address & ADDRESS_MSK) + (offset << 1);
}
-static u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv)
+u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv)
{
struct iwl_eeprom_calib_hdr {
u8 version;
@@ -388,7 +389,7 @@
static struct iwl_sensitivity_ranges iwl5000_sensitivity = {
.min_nrg_cck = 95,
- .max_nrg_cck = 0,
+ .max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 90,
.auto_corr_min_ofdm_mrc = 170,
.auto_corr_min_ofdm_x1 = 120,
@@ -407,7 +408,29 @@
.nrg_th_ofdm = 95,
};
-static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
+static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
+ .min_nrg_cck = 95,
+ .max_nrg_cck = 0, /* not used, set to 0 */
+ .auto_corr_min_ofdm = 90,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 220,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ /* max = min for performance bug in 5150 DSP */
+ .auto_corr_max_ofdm_x1 = 105,
+ .auto_corr_max_ofdm_mrc_x1 = 220,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 170,
+ .auto_corr_max_cck_mrc = 400,
+ .nrg_th_cck = 95,
+ .nrg_th_ofdm = 95,
+};
+
+const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
size_t offset)
{
u32 address = eeprom_indirect_address(priv, offset);
@@ -418,7 +441,7 @@
static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
{
const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
- s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD) -
+ s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
iwl_temp_calib_to_offset(priv);
priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
@@ -427,7 +450,7 @@
static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
- priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
}
/*
@@ -471,7 +494,7 @@
{
struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw;
- int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK;
+ int len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
int index;
/* reduce the size of the length field itself */
@@ -602,7 +625,7 @@
return ret;
}
-static int iwl5000_load_ucode(struct iwl_priv *priv)
+int iwl5000_load_ucode(struct iwl_priv *priv)
{
int ret = 0;
@@ -629,7 +652,7 @@
return ret;
}
-static void iwl5000_init_alive_start(struct iwl_priv *priv)
+void iwl5000_init_alive_start(struct iwl_priv *priv)
{
int ret = 0;
@@ -705,7 +728,7 @@
sizeof(coex_cmd), &coex_cmd);
}
-static int iwl5000_alive_notify(struct iwl_priv *priv)
+int iwl5000_alive_notify(struct iwl_priv *priv)
{
u32 a;
unsigned long flags;
@@ -792,7 +815,7 @@
return 0;
}
-static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
+int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
{
if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) ||
(priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
@@ -822,12 +845,10 @@
}
priv->hw_params.max_bsm_size = 0;
- priv->hw_params.fat_channel = BIT(IEEE80211_BAND_2GHZ) |
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
- priv->hw_params.sens = &iwl5000_sensitivity;
-
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
@@ -836,9 +857,11 @@
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+ /* Set initial sensitivity parameters */
/* Set initial calibration set */
switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
case CSR_HW_REV_TYPE_5150:
+ priv->hw_params.sens = &iwl5150_sensitivity;
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_DC) |
BIT(IWL_CALIB_LO) |
@@ -847,6 +870,7 @@
break;
default:
+ priv->hw_params.sens = &iwl5000_sensitivity;
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_XTAL) |
BIT(IWL_CALIB_LO) |
@@ -862,7 +886,7 @@
/**
* iwl5000_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
-static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
+void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
u16 byte_cnt)
{
@@ -902,7 +926,7 @@
tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
}
-static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
+void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
struct iwl_tx_queue *txq)
{
struct iwl5000_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
@@ -957,7 +981,7 @@
(1 << IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
}
-static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
+int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
int tx_fifo, int sta_id, int tid, u16 ssn_idx)
{
unsigned long flags;
@@ -1018,7 +1042,7 @@
return 0;
}
-static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
+int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
u16 ssn_idx, u8 tx_fifo)
{
if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
@@ -1061,7 +1085,7 @@
* Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
* must be called under priv->lock and mac access
*/
-static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
+void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
{
iwl_write_prph(priv, IWL50_SCD_TXFACT, mask);
}
@@ -1282,13 +1306,13 @@
return len;
}
-static void iwl5000_setup_deferred_work(struct iwl_priv *priv)
+void iwl5000_setup_deferred_work(struct iwl_priv *priv)
{
/* in 5000 the tx power calibration is done in uCode */
priv->disable_tx_power_cal = 1;
}
-static void iwl5000_rx_handler_setup(struct iwl_priv *priv)
+void iwl5000_rx_handler_setup(struct iwl_priv *priv)
{
/* init calibration handlers */
priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
@@ -1299,7 +1323,7 @@
}
-static int iwl5000_hw_valid_rtc_data_addr(u32 addr)
+int iwl5000_hw_valid_rtc_data_addr(u32 addr)
{
return (addr >= IWL50_RTC_DATA_LOWER_BOUND) &&
(addr < IWL50_RTC_DATA_UPPER_BOUND);
@@ -1351,7 +1375,7 @@
return ret;
}
-static int iwl5000_send_tx_power(struct iwl_priv *priv)
+int iwl5000_send_tx_power(struct iwl_priv *priv)
{
struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
u8 tx_ant_cfg_cmd;
@@ -1371,10 +1395,11 @@
NULL);
}
-static void iwl5000_temperature(struct iwl_priv *priv)
+void iwl5000_temperature(struct iwl_priv *priv)
{
/* store temperature from statistics (in Celsius) */
priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
+ iwl_tt_handler(priv);
}
static void iwl5150_temperature(struct iwl_priv *priv)
@@ -1386,6 +1411,7 @@
vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
/* now vt hold the temperature in Kelvin */
priv->temperature = KELVIN_TO_CELSIUS(vt);
+ iwl_tt_handler(priv);
}
/* Calc max signal level (dBm) among 3 possible receivers */
@@ -1426,6 +1452,44 @@
return max_rssi - agc - IWL49_RSSI_OFFSET;
}
+#define IWL5000_UCODE_GET(item) \
+static u32 iwl5000_ucode_get_##item(const struct iwl_ucode_header *ucode,\
+ u32 api_ver) \
+{ \
+ if (api_ver <= 2) \
+ return le32_to_cpu(ucode->u.v1.item); \
+ return le32_to_cpu(ucode->u.v2.item); \
+}
+
+static u32 iwl5000_ucode_get_header_size(u32 api_ver)
+{
+ if (api_ver <= 2)
+ return UCODE_HEADER_SIZE(1);
+ return UCODE_HEADER_SIZE(2);
+}
+
+static u32 iwl5000_ucode_get_build(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ if (api_ver <= 2)
+ return 0;
+ return le32_to_cpu(ucode->u.v2.build);
+}
+
+static u8 *iwl5000_ucode_get_data(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ if (api_ver <= 2)
+ return (u8 *) ucode->u.v1.data;
+ return (u8 *) ucode->u.v2.data;
+}
+
+IWL5000_UCODE_GET(inst_size);
+IWL5000_UCODE_GET(data_size);
+IWL5000_UCODE_GET(init_size);
+IWL5000_UCODE_GET(init_data_size);
+IWL5000_UCODE_GET(boot_size);
+
struct iwl_hcmd_ops iwl5000_hcmd = {
.rxon_assoc = iwl5000_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
@@ -1441,6 +1505,17 @@
.calc_rssi = iwl5000_calc_rssi,
};
+struct iwl_ucode_ops iwl5000_ucode = {
+ .get_header_size = iwl5000_ucode_get_header_size,
+ .get_build = iwl5000_ucode_get_build,
+ .get_inst_size = iwl5000_ucode_get_inst_size,
+ .get_data_size = iwl5000_ucode_get_data_size,
+ .get_init_size = iwl5000_ucode_get_init_size,
+ .get_init_data_size = iwl5000_ucode_get_init_data_size,
+ .get_boot_size = iwl5000_ucode_get_boot_size,
+ .get_data = iwl5000_ucode_get_data,
+};
+
struct iwl_lib_ops iwl5000_lib = {
.set_hw_params = iwl5000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
@@ -1473,8 +1548,8 @@
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
- EEPROM_5000_REG_BAND_24_FAT_CHANNELS,
- EEPROM_5000_REG_BAND_52_FAT_CHANNELS
+ EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
@@ -1523,8 +1598,8 @@
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
- EEPROM_5000_REG_BAND_24_FAT_CHANNELS,
- EEPROM_5000_REG_BAND_52_FAT_CHANNELS
+ EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
@@ -1542,12 +1617,14 @@
};
struct iwl_ops iwl5000_ops = {
+ .ucode = &iwl5000_ucode,
.lib = &iwl5000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
};
static struct iwl_ops iwl5150_ops = {
+ .ucode = &iwl5000_ucode,
.lib = &iwl5150_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
@@ -1576,6 +1653,7 @@
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl5100_bg_cfg = {
@@ -1592,6 +1670,7 @@
.valid_tx_ant = ANT_B,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl5100_abg_cfg = {
@@ -1608,6 +1687,7 @@
.valid_tx_ant = ANT_B,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl5100_agn_cfg = {
@@ -1624,6 +1704,7 @@
.valid_tx_ant = ANT_B,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl5350_agn_cfg = {
@@ -1640,6 +1721,7 @@
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl5150_agn_cfg = {
@@ -1656,6 +1738,7 @@
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .ht_greenfield_support = true,
};
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
@@ -1664,8 +1747,6 @@
module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
MODULE_PARM_DESC(swcrypto50,
"using software crypto engine (default 0 [hardware])\n");
-module_param_named(debug50, iwl50_mod_params.debug, uint, 0444);
-MODULE_PARM_DESC(debug50, "50XX debug output mask");
module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444);
MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444);
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index bd438d8..82b9c93 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -46,8 +46,8 @@
#include "iwl-5000-hw.h"
/* Highest firmware API version supported */
-#define IWL6000_UCODE_API_MAX 2
-#define IWL6050_UCODE_API_MAX 2
+#define IWL6000_UCODE_API_MAX 4
+#define IWL6050_UCODE_API_MAX 4
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 1
@@ -61,6 +61,82 @@
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
+static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 6000 series */
+static void iwl6000_nic_config(struct iwl_priv *priv)
+{
+ iwl5000_nic_config(priv);
+
+ /* no locking required for register write */
+ if (priv->cfg->pa_type == IWL_PA_HYBRID) {
+ /* 2x2 hybrid phy type */
+ iwl_write32(priv, CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB);
+ } else if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
+ /* 2x2 IPA phy type */
+ iwl_write32(priv, CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
+ }
+ /* else do nothing, uCode configured */
+}
+
+static struct iwl_lib_ops iwl6000_lib = {
+ .set_hw_params = iwl5000_hw_set_hw_params,
+ .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
+ .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
+ .txq_set_sched = iwl5000_txq_set_sched,
+ .txq_agg_enable = iwl5000_txq_agg_enable,
+ .txq_agg_disable = iwl5000_txq_agg_disable,
+ .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = iwl_hw_txq_free_tfd,
+ .txq_init = iwl_hw_tx_queue_init,
+ .rx_handler_setup = iwl5000_rx_handler_setup,
+ .setup_deferred_work = iwl5000_setup_deferred_work,
+ .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+ .load_ucode = iwl5000_load_ucode,
+ .init_alive_start = iwl5000_init_alive_start,
+ .alive_notify = iwl5000_alive_notify,
+ .send_tx_power = iwl5000_send_tx_power,
+ .update_chain_flags = iwl_update_chain_flags,
+ .apm_ops = {
+ .init = iwl5000_apm_init,
+ .reset = iwl5000_apm_reset,
+ .stop = iwl5000_apm_stop,
+ .config = iwl6000_nic_config,
+ .set_pwr_src = iwl_set_pwr_src,
+ },
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_5000_REG_BAND_1_CHANNELS,
+ EEPROM_5000_REG_BAND_2_CHANNELS,
+ EEPROM_5000_REG_BAND_3_CHANNELS,
+ EEPROM_5000_REG_BAND_4_CHANNELS,
+ EEPROM_5000_REG_BAND_5_CHANNELS,
+ EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_5000_REG_BAND_52_HT40_CHANNELS
+ },
+ .verify_signature = iwlcore_eeprom_verify_signature,
+ .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+ .release_semaphore = iwlcore_eeprom_release_semaphore,
+ .calib_version = iwl5000_eeprom_calib_version,
+ .query_addr = iwl5000_eeprom_query_addr,
+ .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
+ },
+ .post_associate = iwl_post_associate,
+ .isr = iwl_isr_ict,
+ .config_ap = iwl_config_ap,
+ .temp_ops = {
+ .temperature = iwl5000_temperature,
+ .set_ct_kill = iwl6000_set_ct_threshold,
+ },
+};
+
static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
.get_hcmd_size = iwl5000_get_hcmd_size,
.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
@@ -69,41 +145,57 @@
};
static struct iwl_ops iwl6000_ops = {
- .lib = &iwl5000_lib,
+ .ucode = &iwl5000_ucode,
+ .lib = &iwl6000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl6000_hcmd_utils,
};
-struct iwl_cfg iwl6000_2ag_cfg = {
- .name = "6000 Series 2x2 AG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
- .need_pll_cfg = false,
-};
-struct iwl_cfg iwl6000_2agn_cfg = {
+/*
+ * "h": Hybrid configuration, use both internal and external Power Amplifier
+ */
+struct iwl_cfg iwl6000h_2agn_cfg = {
.name = "6000 Series 2x2 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
+ .pa_type = IWL_PA_HYBRID,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+};
+
+/*
+ * "i": Internal configuration, use internal Power Amplifier
+ */
+struct iwl_cfg iwl6000i_2agn_cfg = {
+ .name = "6000 Series 2x2 AGN",
+ .fw_name_pre = IWL6000_FW_PRE,
+ .ucode_api_max = IWL6000_UCODE_API_MAX,
+ .ucode_api_min = IWL6000_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+ .mod_params = &iwl50_mod_params,
+ .valid_tx_ant = ANT_BC,
+ .valid_rx_ant = ANT_BC,
+ .need_pll_cfg = false,
+ .pa_type = IWL_PA_INTERNAL,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl6050_2agn_cfg = {
@@ -113,13 +205,17 @@
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
@@ -129,13 +225,17 @@
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
};
struct iwl_cfg iwl6050_3agn_cfg = {
@@ -145,13 +245,17 @@
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index ff20e504..40b207a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -97,7 +97,7 @@
enum iwl_table_type lq_type;
u8 ant_type;
u8 is_SGI; /* 1 = short guard interval */
- u8 is_fat; /* 1 = 40 MHz channel width */
+ u8 is_ht40; /* 1 = 40 MHz channel width */
u8 is_dup; /* 1 = duplicated data streams */
u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
u8 max_search; /* maximun number of tables we can search */
@@ -177,7 +177,7 @@
struct sk_buff *skb,
struct ieee80211_sta *sta,
struct iwl_lq_sta *lq_sta);
-static void rs_fill_link_cmd(const struct iwl_priv *priv,
+static void rs_fill_link_cmd(struct iwl_priv *priv,
struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
@@ -332,6 +332,9 @@
} else
return MAX_TID_COUNT;
+ if (unlikely(tid >= TID_MAX_LOAD_COUNT))
+ return MAX_TID_COUNT;
+
tl = &lq_data->load[tid];
curr_time -= curr_time % TID_ROUND_VALUE;
@@ -539,11 +542,11 @@
RATE_MCS_ANT_ABC_MSK);
if (is_Ht(tbl->lq_type)) {
- if (tbl->is_fat) {
+ if (tbl->is_ht40) {
if (tbl->is_dup)
rate_n_flags |= RATE_MCS_DUP_MSK;
else
- rate_n_flags |= RATE_MCS_FAT_MSK;
+ rate_n_flags |= RATE_MCS_HT40_MSK;
}
if (tbl->is_SGI)
rate_n_flags |= RATE_MCS_SGI_MSK;
@@ -579,7 +582,7 @@
return -EINVAL;
}
tbl->is_SGI = 0; /* default legacy setup */
- tbl->is_fat = 0;
+ tbl->is_ht40 = 0;
tbl->is_dup = 0;
tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
tbl->lq_type = LQ_NONE;
@@ -598,9 +601,9 @@
if (rate_n_flags & RATE_MCS_SGI_MSK)
tbl->is_SGI = 1;
- if ((rate_n_flags & RATE_MCS_FAT_MSK) ||
+ if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
(rate_n_flags & RATE_MCS_DUP_MSK))
- tbl->is_fat = 1;
+ tbl->is_ht40 = 1;
if (rate_n_flags & RATE_MCS_DUP_MSK)
tbl->is_dup = 1;
@@ -654,19 +657,15 @@
return 1;
}
-/* in 4965 we don't use greenfield at all */
-static inline u8 rs_use_green(struct iwl_priv *priv,
- struct ieee80211_conf *conf)
+/**
+ * Green-field mode is valid if the station supports it and
+ * there are no non-GF stations present in the BSS.
+ */
+static inline u8 rs_use_green(struct ieee80211_sta *sta,
+ struct iwl_ht_info *ht_conf)
{
- u8 is_green;
-
- if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
- is_green = 0;
- else
- is_green = (conf_is_ht(conf) &&
- priv->current_ht_config.is_green_field &&
- !priv->current_ht_config.non_GF_STA_present);
- return is_green;
+ return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
+ !(ht_conf->non_GF_STA_present);
}
/**
@@ -776,7 +775,7 @@
if (num_of_ant(tbl->ant_type) > 1)
tbl->ant_type = ANT_A;/*FIXME:RS*/
- tbl->is_fat = 0;
+ tbl->is_ht40 = 0;
tbl->is_SGI = 0;
tbl->max_search = IWL_MAX_SEARCH;
}
@@ -819,15 +818,15 @@
{
int status;
u8 retries;
- int rs_index, index = 0;
+ int rs_index, mac_index, index = 0;
struct iwl_lq_sta *lq_sta = priv_sta;
struct iwl_link_quality_cmd *table;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
- struct ieee80211_hw *hw = priv->hw;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_rate_scale_data *window = NULL;
struct iwl_rate_scale_data *search_win = NULL;
+ enum mac80211_rate_control_flags mac_flags;
u32 tx_rate;
struct iwl_scale_tbl_info tbl_type;
struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
@@ -877,17 +876,24 @@
rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
if (priv->band == IEEE80211_BAND_5GHZ)
rs_index -= IWL_FIRST_OFDM_RATE;
+ mac_flags = info->status.rates[0].flags;
+ mac_index = info->status.rates[0].idx;
+ /* For HT packets, map MCS to PLCP */
+ if (mac_flags & IEEE80211_TX_RC_MCS) {
+ mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */
+ if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE))
+ mac_index++;
+ }
- if ((info->status.rates[0].idx < 0) ||
- (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) ||
- (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
- (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) ||
+ if ((mac_index < 0) ||
+ (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
+ (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
+ (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) ||
(tbl_type.ant_type != info->antenna_sel_tx) ||
- (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) ||
- (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
- (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
- hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) {
- IWL_DEBUG_RATE(priv, "initial rate does not match 0x%x\n", tx_rate);
+ (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) ||
+ (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
+ (rs_index != mac_index)) {
+ IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
/* the last LQ command could failed so the LQ in ucode not
* the same in driver sync up
*/
@@ -1049,7 +1055,7 @@
else
tbl->expected_tpt = expected_tpt_A;
} else if (is_siso(tbl->lq_type)) {
- if (tbl->is_fat && !lq_sta->is_dup)
+ if (tbl->is_ht40 && !lq_sta->is_dup)
if (tbl->is_SGI)
tbl->expected_tpt = expected_tpt_siso40MHzSGI;
else
@@ -1059,7 +1065,7 @@
else
tbl->expected_tpt = expected_tpt_siso20MHz;
} else if (is_mimo2(tbl->lq_type)) {
- if (tbl->is_fat && !lq_sta->is_dup)
+ if (tbl->is_ht40 && !lq_sta->is_dup)
if (tbl->is_SGI)
tbl->expected_tpt = expected_tpt_mimo2_40MHzSGI;
else
@@ -1069,7 +1075,7 @@
else
tbl->expected_tpt = expected_tpt_mimo2_20MHz;
} else if (is_mimo3(tbl->lq_type)) {
- if (tbl->is_fat && !lq_sta->is_dup)
+ if (tbl->is_ht40 && !lq_sta->is_dup)
if (tbl->is_SGI)
tbl->expected_tpt = expected_tpt_mimo3_40MHzSGI;
else
@@ -1217,22 +1223,10 @@
tbl->max_search = IWL_MAX_SEARCH;
rate_mask = lq_sta->active_mimo2_rate;
- if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
- tbl->is_fat = 1;
+ if (iwl_is_ht40_tx_allowed(priv, &sta->ht_cap))
+ tbl->is_ht40 = 1;
else
- tbl->is_fat = 0;
-
- /* FIXME: - don't toggle SGI here
- if (tbl->is_fat) {
- if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
- tbl->is_SGI = 1;
- else
- tbl->is_SGI = 0;
- } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
- tbl->is_SGI = 1;
- else
- tbl->is_SGI = 0;
- */
+ tbl->is_ht40 = 0;
rs_set_expected_tpt_table(lq_sta, tbl);
@@ -1283,22 +1277,10 @@
tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
rate_mask = lq_sta->active_mimo3_rate;
- if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
- tbl->is_fat = 1;
+ if (iwl_is_ht40_tx_allowed(priv, &sta->ht_cap))
+ tbl->is_ht40 = 1;
else
- tbl->is_fat = 0;
-
- /* FIXME: - don't toggle SGI here
- if (tbl->is_fat) {
- if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
- tbl->is_SGI = 1;
- else
- tbl->is_SGI = 0;
- } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
- tbl->is_SGI = 1;
- else
- tbl->is_SGI = 0;
- */
+ tbl->is_ht40 = 0;
rs_set_expected_tpt_table(lq_sta, tbl);
@@ -1342,22 +1324,10 @@
tbl->max_search = IWL_MAX_SEARCH;
rate_mask = lq_sta->active_siso_rate;
- if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
- tbl->is_fat = 1;
+ if (iwl_is_ht40_tx_allowed(priv, &sta->ht_cap))
+ tbl->is_ht40 = 1;
else
- tbl->is_fat = 0;
-
- /* FIXME: - don't toggle SGI here
- if (tbl->is_fat) {
- if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
- tbl->is_SGI = 1;
- else
- tbl->is_SGI = 0;
- } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
- tbl->is_SGI = 1;
- else
- tbl->is_SGI = 0;
- */
+ tbl->is_ht40 = 0;
if (is_green)
tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
@@ -1398,6 +1368,12 @@
int ret = 0;
u8 update_search_tbl_counter = 0;
+ if (!iwl_ht_enabled(priv))
+ /* stay in Legacy */
+ tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+ else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
+ tbl->action > IWL_LEGACY_SWITCH_SISO)
+ tbl->action = IWL_LEGACY_SWITCH_SISO;
for (; ;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1521,6 +1497,7 @@
struct iwl_scale_tbl_info *search_tbl =
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
struct iwl_rate_scale_data *window = &(tbl->win[index]);
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action = tbl->action;
@@ -1529,6 +1506,11 @@
u8 update_search_tbl_counter = 0;
int ret;
+ if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
+ tbl->action > IWL_SISO_SWITCH_ANTENNA2) {
+ /* stay in SISO */
+ tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+ }
for (;;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1575,13 +1557,11 @@
goto out;
break;
case IWL_SISO_SWITCH_GI:
- if (!tbl->is_fat &&
- !(priv->current_ht_config.sgf &
- HT_SHORT_GI_20MHZ))
+ if (!tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_20))
break;
- if (tbl->is_fat &&
- !(priv->current_ht_config.sgf &
- HT_SHORT_GI_40MHZ))
+ if (tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_40))
break;
IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n");
@@ -1655,6 +1635,7 @@
struct iwl_scale_tbl_info *search_tbl =
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
struct iwl_rate_scale_data *window = &(tbl->win[index]);
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action = tbl->action;
@@ -1663,6 +1644,12 @@
u8 update_search_tbl_counter = 0;
int ret;
+ if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
+ (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
+ tbl->action > IWL_MIMO2_SWITCH_SISO_C)) {
+ /* switch in SISO */
+ tbl->action = IWL_MIMO2_SWITCH_SISO_A;
+ }
for (;;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1709,13 +1696,11 @@
break;
case IWL_MIMO2_SWITCH_GI:
- if (!tbl->is_fat &&
- !(priv->current_ht_config.sgf &
- HT_SHORT_GI_20MHZ))
+ if (!tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_20))
break;
- if (tbl->is_fat &&
- !(priv->current_ht_config.sgf &
- HT_SHORT_GI_40MHZ))
+ if (tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_40))
break;
IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
@@ -1791,6 +1776,7 @@
struct iwl_scale_tbl_info *search_tbl =
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
struct iwl_rate_scale_data *window = &(tbl->win[index]);
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action = tbl->action;
@@ -1799,6 +1785,12 @@
int ret;
u8 update_search_tbl_counter = 0;
+ if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
+ (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
+ tbl->action > IWL_MIMO3_SWITCH_SISO_C)) {
+ /* switch in SISO */
+ tbl->action = IWL_MIMO3_SWITCH_SISO_A;
+ }
for (;;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1867,13 +1859,11 @@
break;
case IWL_MIMO3_SWITCH_GI:
- if (!tbl->is_fat &&
- !(priv->current_ht_config.sgf &
- HT_SHORT_GI_20MHZ))
+ if (!tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_20))
break;
- if (tbl->is_fat &&
- !(priv->current_ht_config.sgf &
- HT_SHORT_GI_40MHZ))
+ if (tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_40))
break;
IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
@@ -2003,6 +1993,25 @@
}
/*
+ * setup rate table in uCode
+ * return rate_n_flags as used in the table
+ */
+static u32 rs_update_rate_tbl(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct iwl_scale_tbl_info *tbl,
+ int index, u8 is_green)
+{
+ u32 rate;
+
+ /* Update uCode's rate table. */
+ rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
+ rs_fill_link_cmd(priv, lq_sta, rate);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+
+ return rate;
+}
+
+/*
* Do rate scaling and search for new modulation mode.
*/
static void rs_rate_scale_perform(struct iwl_priv *priv,
@@ -2066,7 +2075,7 @@
if (is_legacy(tbl->lq_type))
lq_sta->is_green = 0;
else
- lq_sta->is_green = rs_use_green(priv, conf);
+ lq_sta->is_green = rs_use_green(sta, &priv->current_ht_config);
is_green = lq_sta->is_green;
/* current tx rate */
@@ -2098,6 +2107,16 @@
if (!((1 << index) & rate_scale_index_msk)) {
IWL_ERR(priv, "Current Rate is not valid\n");
+ if (lq_sta->search_better_tbl) {
+ /* revert to active table if search table is not valid*/
+ tbl->lq_type = LQ_NONE;
+ lq_sta->search_better_tbl = 0;
+ tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ /* get "active" rate info */
+ index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+ rate = rs_update_rate_tbl(priv, lq_sta,
+ tbl, index, is_green);
+ }
return;
}
@@ -2149,8 +2168,8 @@
tbl->expected_tpt[index] + 64) / 128));
/* If we are searching for better modulation mode, check success. */
- if (lq_sta->search_better_tbl) {
-
+ if (lq_sta->search_better_tbl &&
+ (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) {
/* If good success, continue using the "search" mode;
* no need to send new link quality command, since we're
* continuing to use the setup that we've been trying. */
@@ -2278,7 +2297,11 @@
((sr > IWL_RATE_HIGH_TH) ||
(current_tpt > (100 * tbl->expected_tpt[low]))))
scale_action = 0;
-
+ if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type))
+ scale_action = -1;
+ if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI &&
+ (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type)))
+ scale_action = -1;
switch (scale_action) {
case -1:
/* Decrease starting rate, update uCode's rate table */
@@ -2308,15 +2331,15 @@
lq_update:
/* Replace uCode's rate table for the destination station. */
- if (update_lq) {
- rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
- rs_fill_link_cmd(priv, lq_sta, rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ if (update_lq)
+ rate = rs_update_rate_tbl(priv, lq_sta,
+ tbl, index, is_green);
+
+ if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) {
+ /* Should we stay with this modulation mode,
+ * or search for a new one? */
+ rs_stay_in_table(lq_sta);
}
-
- /* Should we stay with this modulation mode, or search for a new one? */
- rs_stay_in_table(lq_sta);
-
/*
* Search for new modulation mode if we're:
* 1) Not changing rates right now
@@ -2373,7 +2396,8 @@
* have been tried and compared, stay in this best modulation
* mode for a while before next round of mode comparisons. */
if (lq_sta->enable_counter &&
- (lq_sta->action_counter >= tbl1->max_search)) {
+ (lq_sta->action_counter >= tbl1->max_search) &&
+ iwl_ht_enabled(priv)) {
if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
(lq_sta->tx_agg_tid_en & (1 << tid)) &&
(tid != MAX_TID_COUNT)) {
@@ -2409,7 +2433,7 @@
int rate_idx;
int i;
u32 rate;
- u8 use_green = rs_use_green(priv, conf);
+ u8 use_green = rs_use_green(sta, &priv->current_ht_config);
u8 active_tbl = 0;
u8 valid_tx_ant;
@@ -2462,11 +2486,11 @@
struct ieee80211_supported_band *sband = txrc->sband;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
struct ieee80211_conf *conf = &priv->hw->conf;
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_lq_sta *lq_sta = priv_sta;
int rate_idx;
- u64 mask_bit = 0;
IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n");
@@ -2481,22 +2505,9 @@
lq_sta->max_rate_idx = -1;
}
- if (sta)
- mask_bit = sta->supp_rates[sband->band];
-
/* Send management frames and NO_ACK data using lowest rate. */
- if (!ieee80211_is_data(hdr->frame_control) ||
- info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) {
- if (!mask_bit)
- info->control.rates[0].idx =
- rate_lowest_index(sband, NULL);
- else
- info->control.rates[0].idx =
- rate_lowest_index(sband, sta);
- if (info->flags & IEEE80211_TX_CTL_NO_ACK)
- info->control.rates[0].count = 1;
+ if (rate_control_send_low(sta, priv_sta, txrc))
return;
- }
rate_idx = lq_sta->last_txrate_idx;
@@ -2508,7 +2519,7 @@
IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
hdr->addr1);
sta_id = iwl_add_station(priv, hdr->addr1,
- false, CMD_ASYNC, NULL);
+ false, CMD_ASYNC, ht_cap);
}
if ((sta_id != IWL_INVALID_STATION)) {
lq_sta->lq.sta_id = sta_id;
@@ -2533,15 +2544,20 @@
info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
- if (lq_sta->last_rate_n_flags & RATE_MCS_FAT_MSK)
+ if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
} else {
- if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT)
+ /* Check for invalid rates */
+ if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) ||
+ ((sband->band == IEEE80211_BAND_5GHZ) &&
+ (rate_idx < IWL_FIRST_OFDM_RATE)))
rate_idx = rate_lowest_index(sband, sta);
+ /* On valid 5 GHz rate, adjust index */
else if (sband->band == IEEE80211_BAND_5GHZ)
rate_idx -= IWL_FIRST_OFDM_RATE;
+ info->control.rates[0].flags = 0;
}
info->control.rates[0].idx = rate_idx;
@@ -2577,10 +2593,8 @@
int i, j;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
struct ieee80211_conf *conf = &priv->hw->conf;
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
struct iwl_lq_sta *lq_sta = priv_sta;
- u16 mask_bit = 0;
- int count;
- int start_rate = 0;
lq_sta->flush_timer = 0;
lq_sta->supp_rates = sta->supp_rates[sband->band];
@@ -2605,7 +2619,7 @@
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
sta_id = iwl_add_station(priv, sta->addr, false,
- CMD_ASYNC, NULL);
+ CMD_ASYNC, ht_cap);
}
if ((sta_id != IWL_INVALID_STATION)) {
lq_sta->lq.sta_id = sta_id;
@@ -2618,7 +2632,7 @@
lq_sta->is_dup = 0;
lq_sta->max_rate_idx = -1;
lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
- lq_sta->is_green = rs_use_green(priv, conf);
+ lq_sta->is_green = rs_use_green(sta, &priv->current_ht_config);
lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
lq_sta->active_rate_basic = priv->active_rate_basic;
lq_sta->band = priv->band;
@@ -2626,19 +2640,19 @@
* active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
* supp_rates[] does not; shift to convert format, force 9 MBits off.
*/
- lq_sta->active_siso_rate = sta->ht_cap.mcs.rx_mask[0] << 1;
- lq_sta->active_siso_rate |= sta->ht_cap.mcs.rx_mask[0] & 0x1;
+ lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
+ lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
lq_sta->active_siso_rate &= ~((u16)0x2);
lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
/* Same here */
- lq_sta->active_mimo2_rate = sta->ht_cap.mcs.rx_mask[1] << 1;
- lq_sta->active_mimo2_rate |= sta->ht_cap.mcs.rx_mask[1] & 0x1;
+ lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
+ lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
lq_sta->active_mimo2_rate &= ~((u16)0x2);
lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
- lq_sta->active_mimo3_rate = sta->ht_cap.mcs.rx_mask[2] << 1;
- lq_sta->active_mimo3_rate |= sta->ht_cap.mcs.rx_mask[2] & 0x1;
+ lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1;
+ lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1;
lq_sta->active_mimo3_rate &= ~((u16)0x2);
lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
@@ -2655,25 +2669,15 @@
lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
lq_sta->drv = priv;
- /* Find highest tx rate supported by hardware and destination station */
- mask_bit = sta->supp_rates[sband->band];
- count = sband->n_bitrates;
- if (sband->band == IEEE80211_BAND_5GHZ) {
- count += IWL_FIRST_OFDM_RATE;
- start_rate = IWL_FIRST_OFDM_RATE;
- mask_bit <<= IWL_FIRST_OFDM_RATE;
- }
-
- mask_bit = mask_bit & lq_sta->active_legacy_rate;
- lq_sta->last_txrate_idx = 4;
- for (i = start_rate; i < count; i++)
- if (mask_bit & BIT(i))
- lq_sta->last_txrate_idx = i;
+ /* Set last_txrate_idx to lowest rate */
+ lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
+ if (sband->band == IEEE80211_BAND_5GHZ)
+ lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
rs_initialize_lq(priv, conf, sta, lq_sta);
}
-static void rs_fill_link_cmd(const struct iwl_priv *priv,
+static void rs_fill_link_cmd(struct iwl_priv *priv,
struct iwl_lq_sta *lq_sta, u32 new_rate)
{
struct iwl_scale_tbl_info tbl_type;
@@ -2920,7 +2924,7 @@
(is_siso(tbl->lq_type)) ? "SISO" :
((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
desc += sprintf(buff+desc, " %s",
- (tbl->is_fat) ? "40MHz" : "20MHz");
+ (tbl->is_ht40) ? "40MHz" : "20MHz");
desc += sprintf(buff+desc, " %s %s\n", (tbl->is_SGI) ? "SGI" : "",
(lq_sta->is_green) ? "GF enabled" : "");
}
@@ -2985,12 +2989,13 @@
return -ENOMEM;
for (i = 0; i < LQ_SIZE; i++) {
- desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d GF=%d\n"
+ desc += sprintf(buff+desc,
+ "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
"rate=0x%X\n",
lq_sta->active_tbl == i ? "*" : "x",
lq_sta->lq_info[i].lq_type,
lq_sta->lq_info[i].is_SGI,
- lq_sta->lq_info[i].is_fat,
+ lq_sta->lq_info[i].is_ht40,
lq_sta->lq_info[i].is_dup,
lq_sta->is_green,
lq_sta->lq_info[i].current_rate);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index 25050bf..9fac530 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -73,6 +73,7 @@
IWL_RATE_54M_INDEX,
IWL_RATE_60M_INDEX,
IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
+ IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */
IWL_RATE_COUNT_3945 = IWL_RATE_COUNT - 1,
IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
IWL_RATE_INVALID = IWL_RATE_COUNT,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 355f50e..00457bf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -171,7 +171,7 @@
le16_to_cpu(priv->staging_rxon.channel),
priv->staging_rxon.bssid_addr);
- iwl_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
+ iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
/* Apply the new configuration
* RXON unassoc clears the station table in uCode, send it before
@@ -442,8 +442,8 @@
/* Unmap tx_cmd */
if (num_tbs)
pci_unmap_single(dev,
- pci_unmap_addr(&txq->cmd[index]->meta, mapping),
- pci_unmap_len(&txq->cmd[index]->meta, len),
+ pci_unmap_addr(&txq->meta[index], mapping),
+ pci_unmap_len(&txq->meta[index], len),
PCI_DMA_BIDIRECTIONAL);
/* Unmap chunks, if any. */
@@ -512,70 +512,6 @@
return 0;
}
-
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-
-#define MAX_UCODE_BEACON_INTERVAL 4096
-
-static u16 iwl_adjust_beacon_interval(u16 beacon_val)
-{
- u16 new_val = 0;
- u16 beacon_factor = 0;
-
- beacon_factor = (beacon_val + MAX_UCODE_BEACON_INTERVAL)
- / MAX_UCODE_BEACON_INTERVAL;
- new_val = beacon_val / beacon_factor;
-
- if (!new_val)
- new_val = MAX_UCODE_BEACON_INTERVAL;
-
- return new_val;
-}
-
-static void iwl_setup_rxon_timing(struct iwl_priv *priv)
-{
- u64 tsf;
- s32 interval_tm, rem;
- unsigned long flags;
- struct ieee80211_conf *conf = NULL;
- u16 beacon_int = 0;
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp);
- priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval);
-
- if (priv->iw_mode == NL80211_IFTYPE_STATION) {
- beacon_int = iwl_adjust_beacon_interval(priv->beacon_int);
- priv->rxon_timing.atim_window = 0;
- } else {
- beacon_int = iwl_adjust_beacon_interval(
- priv->vif->bss_conf.beacon_int);
-
- /* TODO: we need to get atim_window from upper stack
- * for now we set to 0 */
- priv->rxon_timing.atim_window = 0;
- }
-
- priv->rxon_timing.beacon_interval = cpu_to_le16(beacon_int);
-
- tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */
- interval_tm = beacon_int * 1024;
- rem = do_div(tsf, interval_tm);
- priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
-
- spin_unlock_irqrestore(&priv->lock, flags);
- IWL_DEBUG_ASSOC(priv, "beacon interval %d beacon timer %d beacon tim %d\n",
- le16_to_cpu(priv->rxon_timing.beacon_interval),
- le32_to_cpu(priv->rxon_timing.beacon_init_val),
- le16_to_cpu(priv->rxon_timing.atim_window));
-}
-
/******************************************************************************
*
* Generic RX handler implementations
@@ -697,7 +633,6 @@
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
unsigned long status = priv->status;
- unsigned long reg_flags;
IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
(flags & HW_CARD_DISABLED) ? "Kill" : "On",
@@ -717,19 +652,12 @@
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
iwl_write_direct32(priv, HBUS_TARG_MBX_C,
HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
}
-
- if (flags & RF_CARD_DISABLED) {
- iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
- iwl_read32(priv, CSR_UCODE_DRV_GP1);
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- if (!iwl_grab_nic_access(priv))
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- }
+ if (flags & RF_CARD_DISABLED)
+ iwl_tt_enter_ct_kill(priv);
}
+ if (!(flags & RF_CARD_DISABLED))
+ iwl_tt_exit_ct_kill(priv);
if (flags & HW_CARD_DISABLED)
set_bit(STATUS_RF_KILL_HW, &priv->status);
@@ -964,7 +892,7 @@
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & IWL_DL_ISR) {
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
@@ -983,7 +911,7 @@
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Microcode HW error detected. Restarting.\n");
+ IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
@@ -999,7 +927,7 @@
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
@@ -1024,7 +952,7 @@
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
hw_rf_kill = 1;
- IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+ IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
hw_rf_kill ? "disable radio" : "enable radio");
priv->isr_stats.rfkill++;
@@ -1113,7 +1041,7 @@
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
@@ -1144,7 +1072,7 @@
inta = priv->inta;
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & IWL_DL_ISR) {
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
@@ -1156,7 +1084,7 @@
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Microcode HW error detected. Restarting.\n");
+ IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
@@ -1172,7 +1100,7 @@
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
@@ -1197,7 +1125,7 @@
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
hw_rf_kill = 1;
- IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+ IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
hw_rf_kill ? "disable radio" : "enable radio");
priv->isr_stats.rfkill++;
@@ -1348,7 +1276,7 @@
*/
static int iwl_read_ucode(struct iwl_priv *priv)
{
- struct iwl_ucode *ucode;
+ struct iwl_ucode_header *ucode;
int ret = -EINVAL, index;
const struct firmware *ucode_raw;
const char *name_pre = priv->cfg->fw_name_pre;
@@ -1357,7 +1285,9 @@
char buf[25];
u8 *src;
size_t len;
- u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
+ u32 api_ver, build;
+ u32 inst_size, data_size, init_size, init_data_size, boot_size;
+ u16 eeprom_ver;
/* Ask kernel firmware_class module to get the boot firmware off disk.
* request_firmware() is synchronous, file is in memory on return. */
@@ -1387,23 +1317,26 @@
if (ret < 0)
goto error;
- /* Make sure that we got at least our header! */
- if (ucode_raw->size < sizeof(*ucode)) {
+ /* Make sure that we got at least the v1 header! */
+ if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
ret = -EINVAL;
goto err_release;
}
/* Data from ucode file: header followed by uCode images */
- ucode = (void *)ucode_raw->data;
+ ucode = (struct iwl_ucode_header *)ucode_raw->data;
priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = le32_to_cpu(ucode->inst_size);
- data_size = le32_to_cpu(ucode->data_size);
- init_size = le32_to_cpu(ucode->init_size);
- init_data_size = le32_to_cpu(ucode->init_data_size);
- boot_size = le32_to_cpu(ucode->boot_size);
+ build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
+ inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
+ data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
+ init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
+ init_data_size =
+ priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
+ boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
+ src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
@@ -1429,6 +1362,14 @@
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver));
+ if (build)
+ IWL_DEBUG_INFO(priv, "Build %u\n", build);
+
+ eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
+ IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
+ (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+ ? "OTP" : "EEPROM", eeprom_ver);
+
IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
priv->ucode_ver);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
@@ -1443,12 +1384,14 @@
boot_size);
/* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size < sizeof(*ucode) +
+ if (ucode_raw->size !=
+ priv->cfg->ops->ucode->get_header_size(api_ver) +
inst_size + data_size + init_size +
init_data_size + boot_size) {
- IWL_DEBUG_INFO(priv, "uCode file size %d too small\n",
- (int)ucode_raw->size);
+ IWL_DEBUG_INFO(priv,
+ "uCode file size %d does not match expected size\n",
+ (int)ucode_raw->size);
ret = -EINVAL;
goto err_release;
}
@@ -1528,42 +1471,42 @@
/* Copy images into buffers for card's bus-master reads ... */
/* Runtime instructions (first block of data in file) */
- src = &ucode->data[0];
- len = priv->ucode_code.len;
+ len = inst_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
memcpy(priv->ucode_code.v_addr, src, len);
+ src += len;
+
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
/* Runtime data (2nd block)
* NOTE: Copy into backup buffer will be done in iwl_up() */
- src = &ucode->data[inst_size];
- len = priv->ucode_data.len;
+ len = data_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
memcpy(priv->ucode_data.v_addr, src, len);
memcpy(priv->ucode_data_backup.v_addr, src, len);
+ src += len;
/* Initialization instructions (3rd block) */
if (init_size) {
- src = &ucode->data[inst_size + data_size];
- len = priv->ucode_init.len;
+ len = init_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
len);
memcpy(priv->ucode_init.v_addr, src, len);
+ src += len;
}
/* Initialization data (4th block) */
if (init_data_size) {
- src = &ucode->data[inst_size + data_size + init_size];
- len = priv->ucode_init_data.len;
+ len = init_data_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
len);
memcpy(priv->ucode_init_data.v_addr, src, len);
+ src += len;
}
/* Bootstrap instructions (5th block) */
- src = &ucode->data[inst_size + data_size + init_size + init_data_size];
- len = priv->ucode_boot.len;
+ len = boot_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
@@ -1663,7 +1606,7 @@
set_bit(STATUS_READY, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
- iwl_power_update_mode(priv, 1);
+ iwl_power_update_mode(priv, true);
/* reassociate for ADHOC mode */
if (priv->vif && (priv->iw_mode == NL80211_IFTYPE_ADHOC)) {
@@ -1812,6 +1755,11 @@
IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
+ ret = iwl_set_hw_ready(priv);
+ if (priv->hw_ready)
+ return ret;
+
+ /* If HW is not ready, prepare the conditions to check again */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_PREPARE);
@@ -1819,6 +1767,7 @@
~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
+ /* HW should be ready by now, check again. */
if (ret != -ETIMEDOUT)
iwl_set_hw_ready(priv);
@@ -2126,7 +2075,7 @@
* If chain noise has already been run, then we need to enable
* power management here */
if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
- iwl_power_update_mode(priv, 0);
+ iwl_power_update_mode(priv, false);
/* Enable Rx differential gain and sensitivity calibrations */
iwl_chain_noise_reset(priv);
@@ -2206,7 +2155,7 @@
priv->is_open = 0;
- if (iwl_is_ready_rf(priv)) {
+ if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
@@ -2331,7 +2280,7 @@
IWL_DEBUG_MAC80211(priv, "enter\n");
- if (priv->hw_params.sw_crypto) {
+ if (priv->cfg->mod_params->sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
@@ -2455,14 +2404,16 @@
* used for controlling the debug level.
*
* See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
*/
-
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
-
- return sprintf(buf, "0x%08X\n", priv->debug_level);
+ return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
@@ -2475,9 +2426,12 @@
ret = strict_strtoul(buf, 0, &val);
if (ret)
IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
- else
+ else {
priv->debug_level = val;
-
+ if (iwl_alloc_traffic_mem(priv))
+ IWL_ERR(priv,
+ "Not enough memory to generate traffic log\n");
+ }
return strnlen(buf, count);
}
@@ -2488,39 +2442,6 @@
#endif /* CONFIG_IWLWIFI_DEBUG */
-static ssize_t show_version(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_alive_resp *palive = &priv->card_alive;
- ssize_t pos = 0;
- u16 eeprom_ver;
-
- if (palive->is_valid)
- pos += sprintf(buf + pos,
- "fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n"
- "fw type: 0x%01X 0x%01X\n",
- palive->ucode_major, palive->ucode_minor,
- palive->sw_rev[0], palive->sw_rev[1],
- palive->ver_type, palive->ver_subtype);
- else
- pos += sprintf(buf + pos, "fw not loaded\n");
-
- if (priv->eeprom) {
- eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
- pos += sprintf(buf + pos, "NVM Type: %s, version: 0x%x\n",
- (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
- ? "OTP" : "EEPROM", eeprom_ver);
-
- } else {
- pos += sprintf(buf + pos, "EEPROM not initialzed\n");
- }
-
- return pos;
-}
-
-static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL);
-
static ssize_t show_temperature(struct device *d,
struct device_attribute *attr, char *buf)
{
@@ -2556,10 +2477,15 @@
ret = strict_strtoul(buf, 10, &val);
if (ret)
IWL_INFO(priv, "%s is not in decimal form.\n", buf);
- else
- iwl_set_tx_power(priv, val, false);
-
- return count;
+ else {
+ ret = iwl_set_tx_power(priv, val, false);
+ if (ret)
+ IWL_ERR(priv, "failed setting tx power (0x%d).\n",
+ ret);
+ else
+ ret = count;
+ }
+ return ret;
}
static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
@@ -2644,67 +2570,6 @@
static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
store_filter_flags);
-static ssize_t store_power_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- int ret;
- unsigned long mode;
-
-
- mutex_lock(&priv->mutex);
-
- ret = strict_strtoul(buf, 10, &mode);
- if (ret)
- goto out;
-
- ret = iwl_power_set_user_mode(priv, mode);
- if (ret) {
- IWL_DEBUG_MAC80211(priv, "failed setting power mode.\n");
- goto out;
- }
- ret = count;
-
- out:
- mutex_unlock(&priv->mutex);
- return ret;
-}
-
-static ssize_t show_power_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- int level = priv->power_data.power_mode;
- char *p = buf;
-
- p += sprintf(p, "%d\n", level);
- return p - buf + 1;
-}
-
-static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
- store_power_level);
-
-static ssize_t show_qos(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- char *p = buf;
- int q;
-
- for (q = 0; q < AC_NUM; q++) {
- p += sprintf(p, "\tcw_min\tcw_max\taifsn\ttxop\n");
- p += sprintf(p, "AC[%d]\t%u\t%u\t%u\t%u\n", q,
- priv->qos_data.def_qos_parm.ac[q].cw_min,
- priv->qos_data.def_qos_parm.ac[q].cw_max,
- priv->qos_data.def_qos_parm.ac[q].aifsn,
- priv->qos_data.def_qos_parm.ac[q].edca_txop);
- }
-
- return p - buf + 1;
-}
-
-static DEVICE_ATTR(qos, S_IRUGO, show_qos, NULL);
static ssize_t show_statistics(struct device *d,
struct device_attribute *attr, char *buf)
@@ -2797,15 +2662,12 @@
static struct attribute *iwl_sysfs_entries[] = {
&dev_attr_flags.attr,
&dev_attr_filter_flags.attr,
- &dev_attr_power_level.attr,
&dev_attr_statistics.attr,
&dev_attr_temperature.attr,
&dev_attr_tx_power.attr,
#ifdef CONFIG_IWLWIFI_DEBUG
&dev_attr_debug_level.attr,
#endif
- &dev_attr_version.attr,
- &dev_attr_qos.attr,
NULL
};
@@ -2849,7 +2711,7 @@
/* Disabling hardware scan means that mac80211 will perform scans
* "the hard way", rather than using device's scan. */
if (cfg->mod_params->disable_hw_scan) {
- if (cfg->mod_params->debug & IWL_DL_INFO)
+ if (iwl_debug_level & IWL_DL_INFO)
dev_printk(KERN_DEBUG, &(pdev->dev),
"Disabling hw_scan\n");
iwl_hw_ops.hw_scan = NULL;
@@ -2871,9 +2733,10 @@
priv->inta_mask = CSR_INI_SET_MASK;
#ifdef CONFIG_IWLWIFI_DEBUG
- priv->debug_level = priv->cfg->mod_params->debug;
atomic_set(&priv->restrict_refcnt, 0);
#endif
+ if (iwl_alloc_traffic_mem(priv))
+ IWL_ERR(priv, "Not enough memory to generate traffic log\n");
/**************************
* 2. Initializing PCI bus
@@ -3034,6 +2897,7 @@
test_bit(STATUS_RF_KILL_HW, &priv->status));
iwl_power_initialize(priv);
+ iwl_tt_initialize(priv);
return 0;
out_remove_sysfs:
@@ -3057,6 +2921,7 @@
pci_disable_device(pdev);
out_ieee80211_free_hw:
ieee80211_free_hw(priv->hw);
+ iwl_free_traffic_mem(priv);
out:
return err;
}
@@ -3086,6 +2951,8 @@
iwl_down(priv);
}
+ iwl_tt_exit(priv);
+
/* make sure we flush any pending irq or
* tasklet for the driver
*/
@@ -3113,6 +2980,7 @@
* until now... */
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
+ iwl_free_traffic_mem(priv);
free_irq(priv->pci_dev->irq, priv);
pci_disable_msi(priv->pci_dev);
@@ -3163,15 +3031,12 @@
{IWL_PCI_DEVICE(0x423C, PCI_ANY_ID, iwl5150_agn_cfg)},
{IWL_PCI_DEVICE(0x423D, PCI_ANY_ID, iwl5150_agn_cfg)},
/* 6000/6050 Series */
- {IWL_PCI_DEVICE(0x0082, 0x1102, iwl6000_2ag_cfg)},
- {IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)},
- {IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)},
+ {IWL_PCI_DEVICE(0x008D, PCI_ANY_ID, iwl6000h_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x008E, PCI_ANY_ID, iwl6000h_2agn_cfg)},
{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
- {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000i_2agn_cfg)},
{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
- {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)},
- {IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)},
- {IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000i_2agn_cfg)},
{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
{IWL_PCI_DEVICE(0x0087, PCI_ANY_ID, iwl6050_2agn_cfg)},
{IWL_PCI_DEVICE(0x0088, PCI_ANY_ID, iwl6050_3agn_cfg)},
@@ -3231,3 +3096,11 @@
module_exit(iwl_exit);
module_init(iwl_init);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+module_param_named(debug50, iwl_debug_level, uint, 0444);
+MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
+module_param_named(debug, iwl_debug_level, uint, 0644);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index a5d6367..c4b565a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -86,7 +86,7 @@
struct iwl_host_cmd hcmd = {
.id = REPLY_PHY_CALIBRATION_CMD,
- .meta.flags = CMD_SIZE_HUGE,
+ .flags = CMD_SIZE_HUGE,
};
for (i = 0; i < IWL_CALIB_MAX; i++) {
@@ -251,12 +251,7 @@
/* increase energy threshold (reduce nrg value)
* to decrease sensitivity */
- if (data->nrg_th_cck >
- (ranges->max_nrg_cck + NRG_STEP_CCK))
- data->nrg_th_cck = data->nrg_th_cck
- - NRG_STEP_CCK;
- else
- data->nrg_th_cck = ranges->max_nrg_cck;
+ data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK;
/* Else if we got fewer than desired, increase sensitivity */
} else if (false_alarms < min_false_alarms) {
data->nrg_curr_state = IWL_FA_TOO_FEW;
@@ -424,7 +419,7 @@
struct iwl_host_cmd cmd_out = {
.id = SENSITIVITY_CMD,
.len = sizeof(struct iwl_sensitivity_cmd),
- .meta.flags = CMD_ASYNC,
+ .flags = CMD_ASYNC,
.data = &cmd,
};
@@ -857,7 +852,7 @@
priv->cfg->ops->lib->update_chain_flags(priv);
data->state = IWL_CHAIN_NOISE_DONE;
- iwl_power_update_mode(priv, 0);
+ iwl_power_update_mode(priv, false);
}
EXPORT_SYMBOL(iwl_chain_noise_calibration);
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index c87033b..2c5c88f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -283,7 +283,7 @@
* 1) Dual stream (MIMO)
* 2) Triple stream (MIMO)
*
- * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data
+ * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
*
* Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
* 3-0: 0xD) 6 Mbps
@@ -320,11 +320,11 @@
#define RATE_MCS_GF_POS 10
#define RATE_MCS_GF_MSK 0x400
-/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */
-#define RATE_MCS_FAT_POS 11
-#define RATE_MCS_FAT_MSK 0x800
+/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
+#define RATE_MCS_HT40_POS 11
+#define RATE_MCS_HT40_MSK 0x800
-/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */
+/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
#define RATE_MCS_DUP_POS 12
#define RATE_MCS_DUP_MSK 0x1000
@@ -459,7 +459,7 @@
/* calibration values from "initialize" uCode */
__le32 voltage; /* signed, higher value is lower voltage */
- __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/
+ __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */
__le32 therm_r2[2]; /* signed */
__le32 therm_r3[2]; /* signed */
__le32 therm_r4[2]; /* signed */
@@ -610,7 +610,7 @@
#define RXON_FLG_HT_OPERATING_MODE_POS (23)
#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
-#define RXON_FLG_FAT_PROT_MSK cpu_to_le32(0x2 << 23)
+#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23)
#define RXON_FLG_CHANNEL_MODE_POS (25)
#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
@@ -765,6 +765,8 @@
} __attribute__ ((packed));
#define IWL_CONN_MAX_LISTEN_INTERVAL 10
+#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
+#define IWL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */
/*
* REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
@@ -884,12 +886,11 @@
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2);
#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8);
-#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8);
#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
-#define STA_FLG_FAT_EN_MSK cpu_to_le32(1 << 21)
+#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21)
#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
@@ -1154,6 +1155,7 @@
#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
@@ -1922,7 +1924,7 @@
#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31)
-#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (64)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
/**
@@ -1982,10 +1984,10 @@
* a) Use this same initial rate for first 3 entries.
* b) Find next lower available rate using same mode (SISO or MIMO),
* use for next 3 entries. If no lower rate available, switch to
- * legacy mode (no FAT channel, no MIMO, no short guard interval).
+ * legacy mode (no HT40 channel, no MIMO, no short guard interval).
* c) If using MIMO, set command's mimo_delimiter to number of entries
* using MIMO (3 or 6).
- * d) After trying 2 HT rates, switch to legacy mode (no FAT channel,
+ * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
* no MIMO, no short guard interval), at the next lower bit rate
* (e.g. if second HT bit rate was 54, try 48 legacy), and follow
* legacy procedure for remaining table entries.
@@ -2311,15 +2313,22 @@
* PM allow:
* bit 0 - '0' Driver not allow power management
* '1' Driver allow PM (use rest of parameters)
+ *
* uCode send sleep notifications:
* bit 1 - '0' Don't send sleep notification
* '1' send sleep notification (SEND_PM_NOTIFICATION)
+ *
* Sleep over DTIM
* bit 2 - '0' PM have to walk up every DTIM
* '1' PM could sleep over DTIM till listen Interval.
+ *
* PCI power managed
* bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
* '1' !(PCI_CFG_LINK_CTRL & 0x1)
+ *
+ * Fast PD
+ * bit 4 - '1' Put radio to sleep when receiving frame for others
+ *
* Force sleep Modes
* bit 31/30- '00' use both mac/xtal sleeps
* '01' force Mac sleep
@@ -2411,6 +2420,13 @@
__le32 critical_temperature_R;
} __attribute__ ((packed));
+/* 1000, and 6x00 */
+struct iwl_ct_kill_throttling_config {
+ __le32 critical_temperature_exit;
+ __le32 reserved;
+ __le32 critical_temperature_enter;
+} __attribute__ ((packed));
+
/******************************************************************************
* (8)
* Scan Commands, Responses, Notifications:
@@ -2913,6 +2929,20 @@
struct statistics_rx_ht_phy ofdm_ht;
} __attribute__ ((packed));
+/**
+ * struct statistics_tx_power - current tx power
+ *
+ * @ant_a: current tx power on chain a in 1/2 dB step
+ * @ant_b: current tx power on chain b in 1/2 dB step
+ * @ant_c: current tx power on chain c in 1/2 dB step
+ */
+struct statistics_tx_power {
+ u8 ant_a;
+ u8 ant_b;
+ u8 ant_c;
+ u8 reserved;
+} __attribute__ ((packed));
+
struct statistics_tx_non_phy_agg {
__le32 ba_timeout;
__le32 ba_reschedule_frames;
@@ -2924,8 +2954,6 @@
__le32 underrun;
__le32 bt_prio_kill;
__le32 rx_ba_rsp_cnt;
- __le32 reserved2;
- __le32 reserved3;
} __attribute__ ((packed));
struct statistics_tx {
@@ -2944,6 +2972,8 @@
__le32 cts_timeout_collision;
__le32 ack_or_ba_timeout_collision;
struct statistics_tx_non_phy_agg agg;
+ struct statistics_tx_power tx_power;
+ __le32 reserved1;
} __attribute__ ((packed));
@@ -3008,7 +3038,7 @@
* one channel that has just been scanned.
*/
#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
-#define STATISTICS_REPLY_FLG_FAT_MODE_MSK cpu_to_le32(0x8)
+#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
struct iwl3945_notif_statistics {
__le32 flag;
@@ -3465,7 +3495,7 @@
*****************************************************************************/
struct iwl_rx_packet {
- __le32 len;
+ __le32 len_n_flags;
struct iwl_cmd_header hdr;
union {
struct iwl3945_rx_frame rx_frame;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 18b135f..acfd7b4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -59,6 +59,9 @@
IWL_RATE_##pp##M_INDEX, \
IWL_RATE_##np##M_INDEX }
+u32 iwl_debug_level;
+EXPORT_SYMBOL(iwl_debug_level);
+
static irqreturn_t iwl_isr(int irq, void *data);
/*
@@ -93,7 +96,6 @@
void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
struct ieee80211_tx_info *info)
{
- int rate_index;
struct ieee80211_tx_rate *r = &info->control.rates[0];
info->antenna_sel_tx =
@@ -102,16 +104,13 @@
r->flags |= IEEE80211_TX_RC_MCS;
if (rate_n_flags & RATE_MCS_GF_MSK)
r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
- if (rate_n_flags & RATE_MCS_FAT_MSK)
+ if (rate_n_flags & RATE_MCS_HT40_MSK)
r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
if (rate_n_flags & RATE_MCS_DUP_MSK)
r->flags |= IEEE80211_TX_RC_DUP_DATA;
if (rate_n_flags & RATE_MCS_SGI_MSK)
r->flags |= IEEE80211_TX_RC_SHORT_GI;
- rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
- if (info->band == IEEE80211_BAND_5GHZ)
- rate_index -= IWL_FIRST_OFDM_RATE;
- r->idx = rate_index;
+ r->idx = iwl_hwrate_to_mac80211_idx(rate_n_flags, info->band);
}
EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
@@ -146,6 +145,27 @@
}
EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
+int iwl_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
+{
+ int idx = 0;
+ int band_offset = 0;
+
+ /* HT rate format: mac80211 wants an MCS number, which is just LSB */
+ if (rate_n_flags & RATE_MCS_HT_MSK) {
+ idx = (rate_n_flags & 0xff);
+ return idx;
+ /* Legacy rate format, search for match in table */
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ band_offset = IWL_FIRST_OFDM_RATE;
+ for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
+ if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
+ return idx - band_offset;
+ }
+
+ return -1;
+}
+
u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant)
{
int i;
@@ -391,13 +411,14 @@
ht_info->ht_supported = true;
- ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
+ if (priv->cfg->ht_greenfield_support)
+ ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
(WLAN_HT_CAP_SM_PS_DISABLED << 2));
max_bit_rate = MAX_BIT_RATE_20_MHZ;
- if (priv->hw_params.fat_channel & BIT(band)) {
+ if (priv->hw_params.ht40_channel & BIT(band)) {
ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
ht_info->mcs.rx_mask[4] = 0x01;
@@ -435,12 +456,12 @@
{
int i;
- for (i = 0; i < IWL_RATE_COUNT; i++) {
+ for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = iwl_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
rates[i].flags = 0;
- if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
+ if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
/*
* If CCK != 1M then set short preamble rate flag.
*/
@@ -476,7 +497,7 @@
if (!channels)
return -ENOMEM;
- rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
+ rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY),
GFP_KERNEL);
if (!rates) {
kfree(channels);
@@ -488,7 +509,7 @@
sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
/* just OFDM */
sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
- sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
+ sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE;
if (priv->cfg->sku & IWL_SKU_N)
iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
@@ -498,7 +519,7 @@
sband->channels = channels;
/* OFDM & CCK */
sband->bitrates = rates;
- sband->n_bitrates = IWL_RATE_COUNT;
+ sband->n_bitrates = IWL_RATE_COUNT_LEGACY;
if (priv->cfg->sku & IWL_SKU_N)
iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
@@ -537,17 +558,14 @@
if (ch->flags & EEPROM_CHANNEL_RADAR)
geo_ch->flags |= IEEE80211_CHAN_RADAR;
- geo_ch->flags |= ch->fat_extension_channel;
+ geo_ch->flags |= ch->ht40_extension_channel;
- if (ch->max_power_avg > priv->tx_power_channel_lmt)
- priv->tx_power_channel_lmt = ch->max_power_avg;
+ if (ch->max_power_avg > priv->tx_power_device_lmt)
+ priv->tx_power_device_lmt = ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
- /* Save flags for reg domain usage */
- geo_ch->orig_flags = geo_ch->flags;
-
IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
ch->channel, geo_ch->center_freq,
is_channel_a_band(ch) ? "5.2" : "2.4",
@@ -604,16 +622,16 @@
return 0;
if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
- return !(ch_info->fat_extension_channel &
+ return !(ch_info->ht40_extension_channel &
IEEE80211_CHAN_NO_HT40PLUS);
else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
- return !(ch_info->fat_extension_channel &
+ return !(ch_info->ht40_extension_channel &
IEEE80211_CHAN_NO_HT40MINUS);
return 0;
}
-u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
+u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *sta_ht_inf)
{
struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
@@ -629,11 +647,72 @@
if (!sta_ht_inf->ht_supported)
return 0;
}
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (priv->disable_ht40)
+ return 0;
+#endif
return iwl_is_channel_extension(priv, priv->band,
le16_to_cpu(priv->staging_rxon.channel),
iwl_ht_conf->extension_chan_offset);
}
-EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
+EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
+
+static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
+{
+ u16 new_val = 0;
+ u16 beacon_factor = 0;
+
+ beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val;
+ new_val = beacon_val / beacon_factor;
+
+ if (!new_val)
+ new_val = max_beacon_val;
+
+ return new_val;
+}
+
+void iwl_setup_rxon_timing(struct iwl_priv *priv)
+{
+ u64 tsf;
+ s32 interval_tm, rem;
+ unsigned long flags;
+ struct ieee80211_conf *conf = NULL;
+ u16 beacon_int;
+
+ conf = ieee80211_get_hw_conf(priv->hw);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp);
+ priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval);
+
+ if (priv->iw_mode == NL80211_IFTYPE_STATION) {
+ beacon_int = priv->beacon_int;
+ priv->rxon_timing.atim_window = 0;
+ } else {
+ beacon_int = priv->vif->bss_conf.beacon_int;
+
+ /* TODO: we need to get atim_window from upper stack
+ * for now we set to 0 */
+ priv->rxon_timing.atim_window = 0;
+ }
+
+ beacon_int = iwl_adjust_beacon_interval(beacon_int,
+ priv->hw_params.max_beacon_itrvl * 1024);
+ priv->rxon_timing.beacon_interval = cpu_to_le16(beacon_int);
+
+ tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */
+ interval_tm = beacon_int * 1024;
+ rem = do_div(tsf, interval_tm);
+ priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ IWL_DEBUG_ASSOC(priv,
+ "beacon interval %d beacon timer %d beacon tim %d\n",
+ le16_to_cpu(priv->rxon_timing.beacon_interval),
+ le32_to_cpu(priv->rxon_timing.beacon_init_val),
+ le16_to_cpu(priv->rxon_timing.atim_window));
+}
+EXPORT_SYMBOL(iwl_setup_rxon_timing);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
{
@@ -805,7 +884,7 @@
if (!ht_info->is_ht) {
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
- RXON_FLG_FAT_PROT_MSK |
+ RXON_FLG_HT40_PROT_MSK |
RXON_FLG_HT_PROT_MSK);
return;
}
@@ -816,12 +895,12 @@
rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
/* Set up channel bandwidth:
- * 20 MHz only, 20/40 mixed or pure 40 if fat ok */
+ * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
/* clear the HT channel mode before set the mode */
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
- if (iwl_is_fat_tx_allowed(priv, NULL)) {
- /* pure 40 fat */
+ if (iwl_is_ht40_tx_allowed(priv, NULL)) {
+ /* pure ht40 */
if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
/* Note: control channel is opposite of extension channel */
@@ -1076,7 +1155,6 @@
priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
}
}
-EXPORT_SYMBOL(iwl_set_flags_for_band);
/*
* initialize rxon structure with default values from eeprom
@@ -1170,7 +1248,7 @@
for (i = 0; i < hw->n_bitrates; i++) {
rate = &(hw->bitrates[i]);
- if (rate->hw_value < IWL_RATE_COUNT)
+ if (rate->hw_value < IWL_RATE_COUNT_LEGACY)
priv->active_rate |= (1 << rate->hw_value);
}
@@ -1231,8 +1309,190 @@
IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
-#endif
+static const char *desc_lookup_text[] = {
+ "OK",
+ "FAIL",
+ "BAD_PARAM",
+ "BAD_CHECKSUM",
+ "NMI_INTERRUPT_WDG",
+ "SYSASSERT",
+ "FATAL_ERROR",
+ "BAD_COMMAND",
+ "HW_ERROR_TUNE_LOCK",
+ "HW_ERROR_TEMPERATURE",
+ "ILLEGAL_CHAN_FREQ",
+ "VCC_NOT_STABLE",
+ "FH_ERROR",
+ "NMI_INTERRUPT_HOST",
+ "NMI_INTERRUPT_ACTION_PT",
+ "NMI_INTERRUPT_UNKNOWN",
+ "UCODE_VERSION_MISMATCH",
+ "HW_ERROR_ABS_LOCK",
+ "HW_ERROR_CAL_LOCK_FAIL",
+ "NMI_INTERRUPT_INST_ACTION_PT",
+ "NMI_INTERRUPT_DATA_ACTION_PT",
+ "NMI_TRM_HW_ER",
+ "NMI_INTERRUPT_TRM",
+ "NMI_INTERRUPT_BREAK_POINT"
+ "DEBUG_0",
+ "DEBUG_1",
+ "DEBUG_2",
+ "DEBUG_3",
+ "UNKNOWN"
+};
+
+static const char *desc_lookup(int i)
+{
+ int max = ARRAY_SIZE(desc_lookup_text) - 1;
+
+ if (i < 0 || i > max)
+ i = max;
+
+ return desc_lookup_text[i];
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+ u32 data2, line;
+ u32 desc, time, count, base, data1;
+ u32 blink1, blink2, ilink1, ilink2;
+
+ if (priv->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+ else
+ base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
+
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+ return;
+ }
+
+ count = iwl_read_targ_mem(priv, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IWL_ERR(priv, "Start IWL Error Log Dump:\n");
+ IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
+ priv->status, count);
+ }
+
+ desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+ blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
+ blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
+ ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
+ ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
+ data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
+ data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
+ line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
+ time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
+
+ IWL_ERR(priv, "Desc Time "
+ "data1 data2 line\n");
+ IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
+ desc_lookup(desc), desc, time, data1, data2, line);
+ IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
+ IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
+ ilink1, ilink2);
+
+}
+
+#define EVENT_START_OFFSET (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+ u32 num_events, u32 mode)
+{
+ u32 i;
+ u32 base; /* SRAM byte address of event log header */
+ u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+ u32 ptr; /* SRAM byte address of log data */
+ u32 ev, time, data; /* event log data */
+
+ if (num_events == 0)
+ return;
+ if (priv->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ else
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+ if (mode == 0)
+ event_size = 2 * sizeof(u32);
+ else
+ event_size = 3 * sizeof(u32);
+
+ ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+ /* "time" is actually "data" for mode 0 (no timestamp).
+ * place event id # at far right for easier visual parsing. */
+ for (i = 0; i < num_events; i++) {
+ ev = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ time = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ if (mode == 0) {
+ /* data, ev */
+ IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
+ } else {
+ data = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+ time, data, ev);
+ }
+ }
+}
+
+void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+ u32 base; /* SRAM byte address of event log header */
+ u32 capacity; /* event log capacity in # entries */
+ u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
+ u32 num_wraps; /* # times uCode wrapped to top of log */
+ u32 next_entry; /* index of next entry to be written by uCode */
+ u32 size; /* # entries that we'll print */
+
+ if (priv->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ else
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+ return;
+ }
+
+ /* event log header */
+ capacity = iwl_read_targ_mem(priv, base);
+ mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
+ num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
+ next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
+
+ size = num_wraps ? capacity : next_entry;
+
+ /* bail out if nothing in log */
+ if (size == 0) {
+ IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
+ return;
+ }
+
+ IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
+ size, num_wraps);
+
+ /* if uCode has wrapped back to top of log, start at the oldest entry,
+ * i.e the next one that uCode would fill. */
+ if (num_wraps)
+ iwl_print_event_log(priv, next_entry,
+ capacity - next_entry, mode);
+ /* (then/else) start at top of log */
+ iwl_print_event_log(priv, 0, next_entry, mode);
+
+}
+#endif
/**
* iwl_irq_handle_error - called for HW or SW error interrupt from card
*/
@@ -1245,7 +1505,7 @@
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & IWL_DL_FW_ERRORS) {
+ if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) {
iwl_dump_nic_error_log(priv);
iwl_dump_nic_event_log(priv);
iwl_print_rx_config_cmd(priv);
@@ -1271,7 +1531,7 @@
void iwl_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mc_list)
+ u64 multicast)
{
struct iwl_priv *priv = hw->priv;
__le32 *filter_flags = &priv->staging_rxon.filter_flags;
@@ -1325,7 +1585,9 @@
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM |
IEEE80211_HW_AMPDU_AGGREGATION |
- IEEE80211_HW_SPECTRUM_MGMT;
+ IEEE80211_HW_SPECTRUM_MGMT |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
@@ -1335,6 +1597,12 @@
/* Firmware does not support this */
hw->wiphy->disable_beacon_hints = true;
+ /*
+ * For now, disable PS by default because it affects
+ * RX performance significantly.
+ */
+ hw->wiphy->ps_default = false;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
@@ -1364,7 +1632,6 @@
int iwl_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
if (priv->cfg->mod_params->amsdu_size_8K)
@@ -1373,6 +1640,8 @@
priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
+ priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
+
if (priv->cfg->mod_params->disable_11n)
priv->cfg->sku &= ~IWL_SKU_N;
@@ -1419,9 +1688,10 @@
priv->qos_data.qos_cap.val = 0;
priv->rates_mask = IWL_RATES_MASK;
- /* If power management is turned on, default to CAM mode */
- priv->power_mode = IWL_POWER_MODE_CAM;
- priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
+ /* Set the tx_power_user_lmt to the lowest power level
+ * this value will get overwritten by channel max power avg
+ * from eeprom */
+ priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
ret = iwl_init_channel_map(priv);
if (ret) {
@@ -1448,6 +1718,8 @@
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
{
int ret = 0;
+ s8 prev_tx_power = priv->tx_power_user_lmt;
+
if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
IWL_WARN(priv, "Requested user TXPOWER %d below lower limit %d.\n",
tx_power,
@@ -1455,25 +1727,37 @@
return -EINVAL;
}
- if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
- IWL_WARN(priv, "Requested user TXPOWER %d above upper limit %d.\n",
- tx_power,
- IWL_TX_POWER_TARGET_POWER_MAX);
+ if (tx_power > priv->tx_power_device_lmt) {
+ IWL_WARN(priv,
+ "Requested user TXPOWER %d above upper limit %d.\n",
+ tx_power, priv->tx_power_device_lmt);
return -EINVAL;
}
if (priv->tx_power_user_lmt != tx_power)
force = true;
- priv->tx_power_user_lmt = tx_power;
-
/* if nic is not up don't send command */
- if (!iwl_is_ready_rf(priv))
- return ret;
+ if (iwl_is_ready_rf(priv)) {
+ priv->tx_power_user_lmt = tx_power;
+ if (force && priv->cfg->ops->lib->send_tx_power)
+ ret = priv->cfg->ops->lib->send_tx_power(priv);
+ else if (!priv->cfg->ops->lib->send_tx_power)
+ ret = -EOPNOTSUPP;
+ /*
+ * if fail to set tx_power, restore the orig. tx power
+ */
+ if (ret)
+ priv->tx_power_user_lmt = prev_tx_power;
+ }
- if (force && priv->cfg->ops->lib->send_tx_power)
- ret = priv->cfg->ops->lib->send_tx_power(priv);
-
+ /*
+ * Even this is an async host command, the command
+ * will always report success from uCode
+ * So once driver can placing the command into the queue
+ * successfully, driver can use priv->tx_power_user_lmt
+ * to reflect the current tx power
+ */
return ret;
}
EXPORT_SYMBOL(iwl_set_tx_power);
@@ -1487,31 +1771,6 @@
}
EXPORT_SYMBOL(iwl_uninit_drv);
-
-void iwl_disable_interrupts(struct iwl_priv *priv)
-{
- clear_bit(STATUS_INT_ENABLED, &priv->status);
-
- /* disable interrupts from uCode/NIC to host */
- iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
- /* acknowledge/clear/reset any interrupts still pending
- * from uCode or flow handler (Rx/Tx DMA) */
- iwl_write32(priv, CSR_INT, 0xffffffff);
- iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
- IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
-}
-EXPORT_SYMBOL(iwl_disable_interrupts);
-
-void iwl_enable_interrupts(struct iwl_priv *priv)
-{
- IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
- set_bit(STATUS_INT_ENABLED, &priv->status);
- iwl_write32(priv, CSR_INT_MASK, priv->inta_mask);
-}
-EXPORT_SYMBOL(iwl_enable_interrupts);
-
-
#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
/* Free dram table */
@@ -1581,7 +1840,7 @@
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
- memset(&priv->ict_tbl[0],0, sizeof(u32) * ICT_COUNT);
+ memset(&priv->ict_tbl[0], 0, sizeof(u32) * ICT_COUNT);
val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT;
@@ -1659,13 +1918,13 @@
/* read all entries that not 0 start with ict_index */
while (priv->ict_tbl[priv->ict_index]) {
- val |= priv->ict_tbl[priv->ict_index];
+ val |= le32_to_cpu(priv->ict_tbl[priv->ict_index]);
IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n",
- priv->ict_index,
- priv->ict_tbl[priv->ict_index]);
+ priv->ict_index,
+ le32_to_cpu(priv->ict_tbl[priv->ict_index]));
priv->ict_tbl[priv->ict_index] = 0;
priv->ict_index = iwl_queue_inc_wrap(priv->ict_index,
- ICT_COUNT);
+ ICT_COUNT);
}
@@ -1745,7 +2004,7 @@
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
"fh 0x%08x\n", inta, inta_mask, inta_fh);
@@ -1852,7 +2111,7 @@
u32 stat_flags = 0;
struct iwl_host_cmd cmd = {
.id = REPLY_STATISTICS_CMD,
- .meta.flags = flags,
+ .flags = flags,
.len = sizeof(stat_flags),
.data = (u8 *) &stat_flags,
};
@@ -1984,194 +2243,10 @@
EXPORT_SYMBOL(iwl_verify_ucode);
-static const char *desc_lookup_text[] = {
- "OK",
- "FAIL",
- "BAD_PARAM",
- "BAD_CHECKSUM",
- "NMI_INTERRUPT_WDG",
- "SYSASSERT",
- "FATAL_ERROR",
- "BAD_COMMAND",
- "HW_ERROR_TUNE_LOCK",
- "HW_ERROR_TEMPERATURE",
- "ILLEGAL_CHAN_FREQ",
- "VCC_NOT_STABLE",
- "FH_ERROR",
- "NMI_INTERRUPT_HOST",
- "NMI_INTERRUPT_ACTION_PT",
- "NMI_INTERRUPT_UNKNOWN",
- "UCODE_VERSION_MISMATCH",
- "HW_ERROR_ABS_LOCK",
- "HW_ERROR_CAL_LOCK_FAIL",
- "NMI_INTERRUPT_INST_ACTION_PT",
- "NMI_INTERRUPT_DATA_ACTION_PT",
- "NMI_TRM_HW_ER",
- "NMI_INTERRUPT_TRM",
- "NMI_INTERRUPT_BREAK_POINT"
- "DEBUG_0",
- "DEBUG_1",
- "DEBUG_2",
- "DEBUG_3",
- "UNKNOWN"
-};
-
-static const char *desc_lookup(int i)
-{
- int max = ARRAY_SIZE(desc_lookup_text) - 1;
-
- if (i < 0 || i > max)
- i = max;
-
- return desc_lookup_text[i];
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-void iwl_dump_nic_error_log(struct iwl_priv *priv)
-{
- u32 data2, line;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
-
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
- if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
- return;
- }
-
- count = iwl_read_targ_mem(priv, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IWL_ERR(priv, "Start IWL Error Log Dump:\n");
- IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
- priv->status, count);
- }
-
- desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
- blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
- blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
- ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
- ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
- data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
- data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
- line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
- time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
-
- IWL_ERR(priv, "Desc Time "
- "data1 data2 line\n");
- IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
- desc_lookup(desc), desc, time, data1, data2, line);
- IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
- IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
- ilink1, ilink2);
-
-}
-EXPORT_SYMBOL(iwl_dump_nic_error_log);
-
-#define EVENT_START_OFFSET (4 * sizeof(u32))
-
-/**
- * iwl_print_event_log - Dump error event log to syslog
- *
- */
-static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
- u32 num_events, u32 mode)
-{
- u32 i;
- u32 base; /* SRAM byte address of event log header */
- u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
- u32 ptr; /* SRAM byte address of log data */
- u32 ev, time, data; /* event log data */
-
- if (num_events == 0)
- return;
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (mode == 0)
- event_size = 2 * sizeof(u32);
- else
- event_size = 3 * sizeof(u32);
-
- ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
- /* "time" is actually "data" for mode 0 (no timestamp).
- * place event id # at far right for easier visual parsing. */
- for (i = 0; i < num_events; i++) {
- ev = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- time = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- if (mode == 0) {
- /* data, ev */
- IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
- } else {
- data = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
- time, data, ev);
- }
- }
-}
-
-void iwl_dump_nic_event_log(struct iwl_priv *priv)
-{
- u32 base; /* SRAM byte address of event log header */
- u32 capacity; /* event log capacity in # entries */
- u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
- u32 num_wraps; /* # times uCode wrapped to top of log */
- u32 next_entry; /* index of next entry to be written by uCode */
- u32 size; /* # entries that we'll print */
-
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return;
- }
-
- /* event log header */
- capacity = iwl_read_targ_mem(priv, base);
- mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
- num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
- next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
- size = num_wraps ? capacity : next_entry;
-
- /* bail out if nothing in log */
- if (size == 0) {
- IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
- return;
- }
-
- IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
- size, num_wraps);
-
- /* if uCode has wrapped back to top of log, start at the oldest entry,
- * i.e the next one that uCode would fill. */
- if (num_wraps)
- iwl_print_event_log(priv, next_entry,
- capacity - next_entry, mode);
- /* (then/else) start at top of log */
- iwl_print_event_log(priv, 0, next_entry, mode);
-
-}
-EXPORT_SYMBOL(iwl_dump_nic_event_log);
-
void iwl_rf_kill_ct_config(struct iwl_priv *priv)
{
struct iwl_ct_kill_config cmd;
+ struct iwl_ct_kill_throttling_config adv_cmd;
unsigned long flags;
int ret = 0;
@@ -2179,18 +2254,44 @@
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
spin_unlock_irqrestore(&priv->lock, flags);
+ priv->thermal_throttle.ct_kill_toggle = false;
- cmd.critical_temperature_R =
- cpu_to_le32(priv->hw_params.ct_kill_threshold);
+ switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_1000:
+ case CSR_HW_REV_TYPE_6x00:
+ case CSR_HW_REV_TYPE_6x50:
+ adv_cmd.critical_temperature_enter =
+ cpu_to_le32(priv->hw_params.ct_kill_threshold);
+ adv_cmd.critical_temperature_exit =
+ cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
- ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
- sizeof(cmd), &cmd);
- if (ret)
- IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
- else
- IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD succeeded, "
- "critical temperature is %d\n",
- cmd.critical_temperature_R);
+ ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(adv_cmd), &adv_cmd);
+ if (ret)
+ IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+ else
+ IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+ "succeeded, "
+ "critical temperature enter is %d,"
+ "exit is %d\n",
+ priv->hw_params.ct_kill_threshold,
+ priv->hw_params.ct_kill_exit_threshold);
+ break;
+ default:
+ cmd.critical_temperature_R =
+ cpu_to_le32(priv->hw_params.ct_kill_threshold);
+
+ ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(cmd), &cmd);
+ if (ret)
+ IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+ else
+ IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+ "succeeded, "
+ "critical temperature is %d\n",
+ priv->hw_params.ct_kill_threshold);
+ break;
+ }
}
EXPORT_SYMBOL(iwl_rf_kill_ct_config);
@@ -2211,12 +2312,11 @@
.id = REPLY_CARD_STATE_CMD,
.len = sizeof(u32),
.data = &flags,
- .meta.flags = meta_flag,
+ .flags = meta_flag,
};
return iwl_send_cmd(priv, &cmd);
}
-EXPORT_SYMBOL(iwl_send_card_state);
void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -2234,10 +2334,11 @@
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
- "notification for %s:\n",
- le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
- iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
+ "notification for %s:\n", len,
+ get_cmd_string(pkt->hdr.cmd));
+ iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len);
}
EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
@@ -2260,7 +2361,6 @@
{
memset(&priv->isr_stats, 0, sizeof(priv->isr_stats));
}
-EXPORT_SYMBOL(iwl_clear_isr_stats);
int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
@@ -2333,39 +2433,10 @@
}
ht_conf = &sta->ht_cap;
- if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
- iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
- if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
- iwl_conf->sgf |= HT_SHORT_GI_40MHZ;
-
- iwl_conf->is_green_field = !!(ht_conf->cap & IEEE80211_HT_CAP_GRN_FLD);
- iwl_conf->max_amsdu_size =
- !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
-
- iwl_conf->supported_chan_width =
- !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
-
- /*
- * XXX: The HT configuration needs to be moved into iwl_mac_config()
- * to be done there correctly.
- */
-
- iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
- if (conf_is_ht40_minus(&priv->hw->conf))
- iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
- else if (conf_is_ht40_plus(&priv->hw->conf))
- iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-
- /* If no above or below channel supplied disable FAT channel */
- if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
- iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
- iwl_conf->supported_chan_width = 0;
-
iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
- iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
iwl_conf->ht_protection =
bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
iwl_conf->non_GF_STA_present =
@@ -2492,7 +2563,6 @@
if (bss_conf->assoc) {
priv->assoc_id = bss_conf->aid;
priv->beacon_int = bss_conf->beacon_int;
- priv->power_data.dtim_period = bss_conf->dtim_period;
priv->timestamp = bss_conf->timestamp;
priv->assoc_capability = bss_conf->assoc_capability;
@@ -2679,6 +2749,7 @@
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
+ struct iwl_ht_info *ht_conf = &priv->current_ht_config;
unsigned long flags = 0;
int ret = 0;
u16 ch;
@@ -2720,10 +2791,32 @@
goto set_ch_out;
}
- priv->current_ht_config.is_ht = conf_is_ht(conf);
-
spin_lock_irqsave(&priv->lock, flags);
+ /* Configure HT40 channels */
+ ht_conf->is_ht = conf_is_ht(conf);
+ if (ht_conf->is_ht) {
+ if (conf_is_ht40_minus(conf)) {
+ ht_conf->extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ ht_conf->supported_chan_width =
+ IWL_CHANNEL_WIDTH_40MHZ;
+ } else if (conf_is_ht40_plus(conf)) {
+ ht_conf->extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+ ht_conf->supported_chan_width =
+ IWL_CHANNEL_WIDTH_40MHZ;
+ } else {
+ ht_conf->extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ ht_conf->supported_chan_width =
+ IWL_CHANNEL_WIDTH_20MHZ;
+ }
+ } else
+ ht_conf->supported_chan_width = IWL_CHANNEL_WIDTH_20MHZ;
+ /* Default to no protection. Protection mode will later be set
+ * from BSS config in iwl_ht_conf */
+ ht_conf->ht_protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
/* if we are switching from ht to 2.4 clear flags
* from any ht related info since 2.4 does not
@@ -2742,13 +2835,10 @@
iwl_set_rate(priv);
}
- if (changed & IEEE80211_CONF_CHANGE_PS &&
- priv->iw_mode == NL80211_IFTYPE_STATION) {
- priv->power_data.power_disabled =
- !(conf->flags & IEEE80211_CONF_PS);
- ret = iwl_power_update_mode(priv, 0);
+ if (changed & IEEE80211_CONF_CHANGE_PS) {
+ ret = iwl_power_update_mode(priv, false);
if (ret)
- IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
+ IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
@@ -2881,6 +2971,248 @@
}
EXPORT_SYMBOL(iwl_mac_reset_tsf);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+
+#define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
+
+void iwl_reset_traffic_log(struct iwl_priv *priv)
+{
+ priv->tx_traffic_idx = 0;
+ priv->rx_traffic_idx = 0;
+ if (priv->tx_traffic)
+ memset(priv->tx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE);
+ if (priv->rx_traffic)
+ memset(priv->rx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE);
+}
+
+int iwl_alloc_traffic_mem(struct iwl_priv *priv)
+{
+ u32 traffic_size = IWL_TRAFFIC_DUMP_SIZE;
+
+ if (iwl_debug_level & IWL_DL_TX) {
+ if (!priv->tx_traffic) {
+ priv->tx_traffic =
+ kzalloc(traffic_size, GFP_KERNEL);
+ if (!priv->tx_traffic)
+ return -ENOMEM;
+ }
+ }
+ if (iwl_debug_level & IWL_DL_RX) {
+ if (!priv->rx_traffic) {
+ priv->rx_traffic =
+ kzalloc(traffic_size, GFP_KERNEL);
+ if (!priv->rx_traffic)
+ return -ENOMEM;
+ }
+ }
+ iwl_reset_traffic_log(priv);
+ return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_traffic_mem);
+
+void iwl_free_traffic_mem(struct iwl_priv *priv)
+{
+ kfree(priv->tx_traffic);
+ priv->tx_traffic = NULL;
+
+ kfree(priv->rx_traffic);
+ priv->rx_traffic = NULL;
+}
+EXPORT_SYMBOL(iwl_free_traffic_mem);
+
+void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
+ u16 length, struct ieee80211_hdr *header)
+{
+ __le16 fc;
+ u16 len;
+
+ if (likely(!(iwl_debug_level & IWL_DL_TX)))
+ return;
+
+ if (!priv->tx_traffic)
+ return;
+
+ fc = header->frame_control;
+ if (ieee80211_is_data(fc)) {
+ len = (length > IWL_TRAFFIC_ENTRY_SIZE)
+ ? IWL_TRAFFIC_ENTRY_SIZE : length;
+ memcpy((priv->tx_traffic +
+ (priv->tx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)),
+ header, len);
+ priv->tx_traffic_idx =
+ (priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
+ }
+}
+EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame);
+
+void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
+ u16 length, struct ieee80211_hdr *header)
+{
+ __le16 fc;
+ u16 len;
+
+ if (likely(!(iwl_debug_level & IWL_DL_RX)))
+ return;
+
+ if (!priv->rx_traffic)
+ return;
+
+ fc = header->frame_control;
+ if (ieee80211_is_data(fc)) {
+ len = (length > IWL_TRAFFIC_ENTRY_SIZE)
+ ? IWL_TRAFFIC_ENTRY_SIZE : length;
+ memcpy((priv->rx_traffic +
+ (priv->rx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)),
+ header, len);
+ priv->rx_traffic_idx =
+ (priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
+ }
+}
+EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame);
+
+const char *get_mgmt_string(int cmd)
+{
+ switch (cmd) {
+ IWL_CMD(MANAGEMENT_ASSOC_REQ);
+ IWL_CMD(MANAGEMENT_ASSOC_RESP);
+ IWL_CMD(MANAGEMENT_REASSOC_REQ);
+ IWL_CMD(MANAGEMENT_REASSOC_RESP);
+ IWL_CMD(MANAGEMENT_PROBE_REQ);
+ IWL_CMD(MANAGEMENT_PROBE_RESP);
+ IWL_CMD(MANAGEMENT_BEACON);
+ IWL_CMD(MANAGEMENT_ATIM);
+ IWL_CMD(MANAGEMENT_DISASSOC);
+ IWL_CMD(MANAGEMENT_AUTH);
+ IWL_CMD(MANAGEMENT_DEAUTH);
+ IWL_CMD(MANAGEMENT_ACTION);
+ default:
+ return "UNKNOWN";
+
+ }
+}
+
+const char *get_ctrl_string(int cmd)
+{
+ switch (cmd) {
+ IWL_CMD(CONTROL_BACK_REQ);
+ IWL_CMD(CONTROL_BACK);
+ IWL_CMD(CONTROL_PSPOLL);
+ IWL_CMD(CONTROL_RTS);
+ IWL_CMD(CONTROL_CTS);
+ IWL_CMD(CONTROL_ACK);
+ IWL_CMD(CONTROL_CFEND);
+ IWL_CMD(CONTROL_CFENDACK);
+ default:
+ return "UNKNOWN";
+
+ }
+}
+
+void iwl_clear_tx_stats(struct iwl_priv *priv)
+{
+ memset(&priv->tx_stats, 0, sizeof(struct traffic_stats));
+
+}
+
+void iwl_clear_rx_stats(struct iwl_priv *priv)
+{
+ memset(&priv->rx_stats, 0, sizeof(struct traffic_stats));
+}
+
+/*
+ * if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will
+ * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass.
+ * Use debugFs to display the rx/rx_statistics
+ * if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL
+ * information will be recorded, but DATA pkt still will be recorded
+ * for the reason of iwl_led.c need to control the led blinking based on
+ * number of tx and rx data.
+ *
+ */
+void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len)
+{
+ struct traffic_stats *stats;
+
+ if (is_tx)
+ stats = &priv->tx_stats;
+ else
+ stats = &priv->rx_stats;
+
+ if (ieee80211_is_mgmt(fc)) {
+ switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+ case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+ stats->mgmt[MANAGEMENT_ASSOC_REQ]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
+ stats->mgmt[MANAGEMENT_ASSOC_RESP]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
+ stats->mgmt[MANAGEMENT_REASSOC_REQ]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
+ stats->mgmt[MANAGEMENT_REASSOC_RESP]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ):
+ stats->mgmt[MANAGEMENT_PROBE_REQ]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
+ stats->mgmt[MANAGEMENT_PROBE_RESP]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_BEACON):
+ stats->mgmt[MANAGEMENT_BEACON]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_ATIM):
+ stats->mgmt[MANAGEMENT_ATIM]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+ stats->mgmt[MANAGEMENT_DISASSOC]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_AUTH):
+ stats->mgmt[MANAGEMENT_AUTH]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+ stats->mgmt[MANAGEMENT_DEAUTH]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_ACTION):
+ stats->mgmt[MANAGEMENT_ACTION]++;
+ break;
+ }
+ } else if (ieee80211_is_ctl(fc)) {
+ switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+ case cpu_to_le16(IEEE80211_STYPE_BACK_REQ):
+ stats->ctrl[CONTROL_BACK_REQ]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_BACK):
+ stats->ctrl[CONTROL_BACK]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_PSPOLL):
+ stats->ctrl[CONTROL_PSPOLL]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_RTS):
+ stats->ctrl[CONTROL_RTS]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_CTS):
+ stats->ctrl[CONTROL_CTS]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_ACK):
+ stats->ctrl[CONTROL_ACK]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_CFEND):
+ stats->ctrl[CONTROL_CFEND]++;
+ break;
+ case cpu_to_le16(IEEE80211_STYPE_CFENDACK):
+ stats->ctrl[CONTROL_CFENDACK]++;
+ break;
+ }
+ } else {
+ /* data */
+ stats->data_cnt++;
+ stats->data_bytes += len;
+ }
+}
+EXPORT_SYMBOL(iwl_update_stats);
+#endif
+
#ifdef CONFIG_PM
int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index dabf663..c04d2a2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -83,6 +83,8 @@
#define IWL_SKU_A 0x2
#define IWL_SKU_N 0x8
+#define IWL_CMD(x) case x: return #x
+
struct iwl_hcmd_ops {
int (*rxon_assoc)(struct iwl_priv *priv);
int (*commit_rxon)(struct iwl_priv *priv);
@@ -116,6 +118,17 @@
void (*set_ct_kill)(struct iwl_priv *priv);
};
+struct iwl_ucode_ops {
+ u32 (*get_header_size)(u32);
+ u32 (*get_build)(const struct iwl_ucode_header *, u32);
+ u32 (*get_inst_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_data_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_init_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_init_data_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_boot_size)(const struct iwl_ucode_header *, u32);
+ u8 * (*get_data)(const struct iwl_ucode_header *, u32);
+};
+
struct iwl_lib_ops {
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
@@ -171,6 +184,7 @@
};
struct iwl_ops {
+ const struct iwl_ucode_ops *ucode;
const struct iwl_lib_ops *lib;
const struct iwl_hcmd_ops *hcmd;
const struct iwl_hcmd_utils_ops *utils;
@@ -178,7 +192,6 @@
struct iwl_mod_params {
int sw_crypto; /* def: 0 = using hardware encryption */
- u32 debug; /* def: 0 = minimal debug log messages */
int disable_hw_scan; /* def: 0 = use h/w scan */
int num_of_queues; /* def: HW dependent */
int num_of_ampdu_queues;/* def: HW dependent */
@@ -195,6 +208,9 @@
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_min: Lowest version of uCode API supported by driver.
+ * @pa_type: used by 6000 series only to identify the type of Power Amplifier
+ * @max_ll_items: max number of OTP blocks
+ * @shadow_ram_support: shadow support for OTP memory
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -215,6 +231,7 @@
* iwl_hcmd_utils_ops etc. we accommodate different command structures
* and flows between hardware versions (4965/5000) as well as their API
* versions.
+ *
*/
struct iwl_cfg {
const char *name;
@@ -231,6 +248,10 @@
u8 valid_rx_ant;
bool need_pll_cfg;
bool use_isr_legacy;
+ enum iwl_pa_type pa_type;
+ const u16 max_ll_items;
+ const bool shadow_ram_support;
+ const bool ht_greenfield_support;
};
/***************************
@@ -250,7 +271,7 @@
void iwl_set_rxon_chain(struct iwl_priv *priv);
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info);
-u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
+u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *sta_ht_inf);
void iwl_set_flags_for_band(struct iwl_priv *priv, enum ieee80211_band band);
void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode);
@@ -261,8 +282,7 @@
void iwl_irq_handle_error(struct iwl_priv *priv);
void iwl_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mc_list);
+ unsigned int *total_flags, u64 multicast);
int iwl_hw_nic_init(struct iwl_priv *priv);
int iwl_setup_mac(struct iwl_priv *priv);
int iwl_set_hw_params(struct iwl_priv *priv);
@@ -286,7 +306,55 @@
int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats);
void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+int iwl_alloc_traffic_mem(struct iwl_priv *priv);
+void iwl_free_traffic_mem(struct iwl_priv *priv);
+void iwl_reset_traffic_log(struct iwl_priv *priv);
+void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
+ u16 length, struct ieee80211_hdr *header);
+void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
+ u16 length, struct ieee80211_hdr *header);
+const char *get_mgmt_string(int cmd);
+const char *get_ctrl_string(int cmd);
+void iwl_clear_tx_stats(struct iwl_priv *priv);
+void iwl_clear_rx_stats(struct iwl_priv *priv);
+void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc,
+ u16 len);
+#else
+static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv)
+{
+ return 0;
+}
+static inline void iwl_free_traffic_mem(struct iwl_priv *priv)
+{
+}
+static inline void iwl_reset_traffic_log(struct iwl_priv *priv)
+{
+}
+static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
+ u16 length, struct ieee80211_hdr *header)
+{
+}
+static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
+ u16 length, struct ieee80211_hdr *header)
+{
+}
+static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx,
+ __le16 fc, u16 len)
+{
+ struct traffic_stats *stats;
+ if (is_tx)
+ stats = &priv->tx_stats;
+ else
+ stats = &priv->rx_stats;
+
+ if (ieee80211_is_data(fc)) {
+ /* data */
+ stats->data_bytes += len;
+ }
+}
+#endif
/*****************************************************
* RX handlers.
* **************************************************/
@@ -355,6 +423,7 @@
void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
struct ieee80211_tx_info *info);
int iwl_hwrate_to_plcp_idx(u32 rate_n_flags);
+int iwl_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band);
u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv);
@@ -384,7 +453,6 @@
void iwl_init_scan_params(struct iwl_priv *priv);
int iwl_scan_cancel(struct iwl_priv *priv);
int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
-int iwl_scan_initiate(struct iwl_priv *priv);
int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
const u8 *ie, int ie_len, int left);
@@ -398,7 +466,6 @@
void iwl_bg_abort_scan(struct work_struct *work);
void iwl_bg_scan_completed(struct work_struct *work);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
-int iwl_send_scan_abort(struct iwl_priv *priv);
/* For faster active scanning, scan will move to the next channel if fewer than
* PLCP_QUIET_THRESH packets are heard on this channel within
@@ -437,9 +504,9 @@
u16 len, const void *data);
int iwl_send_cmd_pdu_async(struct iwl_priv *priv, u8 id, u16 len,
const void *data,
- int (*callback)(struct iwl_priv *priv,
- struct iwl_cmd *cmd,
- struct sk_buff *skb));
+ void (*callback)(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb));
int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
@@ -449,8 +516,6 @@
/*****************************************************
* PCI *
*****************************************************/
-void iwl_disable_interrupts(struct iwl_priv *priv);
-void iwl_enable_interrupts(struct iwl_priv *priv);
irqreturn_t iwl_isr_legacy(int irq, void *data);
int iwl_reset_ict(struct iwl_priv *priv);
void iwl_disable_ict(struct iwl_priv *priv);
@@ -474,7 +539,6 @@
/*****************************************************
* Error Handling Debugging
******************************************************/
-void iwl_dump_nic_error_log(struct iwl_priv *priv);
void iwl_dump_nic_event_log(struct iwl_priv *priv);
void iwl_clear_isr_stats(struct iwl_priv *priv);
@@ -556,6 +620,7 @@
void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb);
+void iwl_setup_rxon_timing(struct iwl_priv *priv);
static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
{
return priv->cfg->ops->hcmd->rxon_assoc(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index f03dae1..06437d1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -91,7 +91,8 @@
#define CSR_EEPROM_GP (CSR_BASE+0x030)
#define CSR_OTP_GP_REG (CSR_BASE+0x034)
#define CSR_GIO_REG (CSR_BASE+0x03C)
-#define CSR_GP_UCODE (CSR_BASE+0x044)
+#define CSR_GP_UCODE_REG (CSR_BASE+0x048)
+#define CSR_GP_DRIVER_REG (CSR_BASE+0x050)
#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
@@ -245,6 +246,13 @@
#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
+/* GP Driver */
+#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003)
+#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000)
+#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001)
+#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002)
+
+
/* GI Chicken Bits */
#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 2cf014f..cbc6290 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -30,16 +30,23 @@
#define __iwl_debug_h__
struct iwl_priv;
+extern u32 iwl_debug_level;
#define IWL_ERR(p, f, a...) dev_err(&((p)->pci_dev->dev), f, ## a)
#define IWL_WARN(p, f, a...) dev_warn(&((p)->pci_dev->dev), f, ## a)
#define IWL_INFO(p, f, a...) dev_info(&((p)->pci_dev->dev), f, ## a)
#define IWL_CRIT(p, f, a...) dev_crit(&((p)->pci_dev->dev), f, ## a)
+#define iwl_print_hex_error(priv, p, len) \
+do { \
+ print_hex_dump(KERN_ERR, "iwl data: ", \
+ DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
+} while (0)
+
#ifdef CONFIG_IWLWIFI_DEBUG
#define IWL_DEBUG(__priv, level, fmt, args...) \
do { \
- if (__priv->debug_level & (level)) \
+ if (iwl_get_debug_level(__priv) & (level)) \
dev_printk(KERN_ERR, &(__priv->hw->wiphy->dev), \
"%c %s " fmt, in_interrupt() ? 'I' : 'U', \
__func__ , ## args); \
@@ -47,7 +54,7 @@
#define IWL_DEBUG_LIMIT(__priv, level, fmt, args...) \
do { \
- if ((__priv->debug_level & (level)) && net_ratelimit()) \
+ if ((iwl_get_debug_level(__priv) & (level)) && net_ratelimit()) \
dev_printk(KERN_ERR, &(__priv->hw->wiphy->dev), \
"%c %s " fmt, in_interrupt() ? 'I' : 'U', \
__func__ , ## args); \
@@ -55,7 +62,7 @@
#define iwl_print_hex_dump(priv, level, p, len) \
do { \
- if (priv->debug_level & level) \
+ if (iwl_get_debug_level(priv) & level) \
print_hex_dump(KERN_DEBUG, "iwl data: ", \
DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \
} while (0)
@@ -65,23 +72,43 @@
const char *name;
struct dentry *dir_drv;
struct dentry *dir_data;
+ struct dentry *dir_debug;
struct dentry *dir_rf;
struct dir_data_files {
struct dentry *file_sram;
struct dentry *file_nvm;
struct dentry *file_stations;
- struct dentry *file_rx_statistics;
- struct dentry *file_tx_statistics;
struct dentry *file_log_event;
struct dentry *file_channels;
struct dentry *file_status;
struct dentry *file_interrupt;
+ struct dentry *file_qos;
+ struct dentry *file_thermal_throttling;
+#ifdef CONFIG_IWLWIFI_LEDS
+ struct dentry *file_led;
+#endif
+ struct dentry *file_disable_ht40;
+ struct dentry *file_sleep_level_override;
+ struct dentry *file_current_sleep_command;
} dbgfs_data_files;
struct dir_rf_files {
struct dentry *file_disable_sensitivity;
struct dentry *file_disable_chain_noise;
struct dentry *file_disable_tx_power;
} dbgfs_rf_files;
+ struct dir_debug_files {
+ struct dentry *file_rx_statistics;
+ struct dentry *file_tx_statistics;
+ struct dentry *file_traffic_log;
+ struct dentry *file_rx_queue;
+ struct dentry *file_tx_queue;
+ struct dentry *file_ucode_rx_stats;
+ struct dentry *file_ucode_tx_stats;
+ struct dentry *file_ucode_general_stats;
+ struct dentry *file_sensitivity;
+ struct dentry *file_chain_noise;
+ struct dentry *file_tx_power;
+ } dbgfs_debug_files;
u32 sram_offset;
u32 sram_len;
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index ca00cc8a..fb84485 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -38,7 +38,7 @@
#include "iwl-debug.h"
#include "iwl-core.h"
#include "iwl-io.h"
-
+#include "iwl-calib.h"
/* create and remove of files */
#define DEBUGFS_ADD_DIR(name, parent) do { \
@@ -49,7 +49,8 @@
#define DEBUGFS_ADD_FILE(name, parent) do { \
dbgfs->dbgfs_##parent##_files.file_##name = \
- debugfs_create_file(#name, 0644, dbgfs->dir_##parent, priv, \
+ debugfs_create_file(#name, S_IWUSR | S_IRUSR, \
+ dbgfs->dir_##parent, priv, \
&iwl_dbgfs_##name##_ops); \
if (!(dbgfs->dbgfs_##parent##_files.file_##name)) \
goto err; \
@@ -57,7 +58,8 @@
#define DEBUGFS_ADD_BOOL(name, parent, ptr) do { \
dbgfs->dbgfs_##parent##_files.file_##name = \
- debugfs_create_bool(#name, 0644, dbgfs->dir_##parent, ptr); \
+ debugfs_create_bool(#name, S_IWUSR | S_IRUSR, \
+ dbgfs->dir_##parent, ptr); \
if (IS_ERR(dbgfs->dbgfs_##parent##_files.file_##name) \
|| !dbgfs->dbgfs_##parent##_files.file_##name) \
goto err; \
@@ -65,7 +67,7 @@
#define DEBUGFS_ADD_X32(name, parent, ptr) do { \
dbgfs->dbgfs_##parent##_files.file_##name = \
- debugfs_create_x32(#name, 0444, dbgfs->dir_##parent, ptr); \
+ debugfs_create_x32(#name, S_IRUSR, dbgfs->dir_##parent, ptr); \
if (IS_ERR(dbgfs->dbgfs_##parent##_files.file_##name) \
|| !dbgfs->dbgfs_##parent##_files.file_##name) \
goto err; \
@@ -124,18 +126,58 @@
size_t count, loff_t *ppos) {
struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
- char buf[256];
+ char *buf;
int pos = 0;
- const size_t bufsz = sizeof(buf);
- pos += scnprintf(buf + pos, bufsz - pos, "mgmt: %u\n",
- priv->tx_stats[0].cnt);
- pos += scnprintf(buf + pos, bufsz - pos, "ctrl: %u\n",
- priv->tx_stats[1].cnt);
- pos += scnprintf(buf + pos, bufsz - pos, "data: %u\n",
- priv->tx_stats[2].cnt);
+ int cnt;
+ ssize_t ret;
+ const size_t bufsz = 100 + sizeof(char) * 24 * (MANAGEMENT_MAX + CONTROL_MAX);
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ pos += scnprintf(buf + pos, bufsz - pos, "Management:\n");
+ for (cnt = 0; cnt < MANAGEMENT_MAX; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\t%s\t\t: %u\n",
+ get_mgmt_string(cnt),
+ priv->tx_stats.mgmt[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "Control\n");
+ for (cnt = 0; cnt < CONTROL_MAX; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\t%s\t\t: %u\n",
+ get_ctrl_string(cnt),
+ priv->tx_stats.ctrl[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "Data:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "\tcnt: %u\n",
+ priv->tx_stats.data_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tbytes: %llu\n",
+ priv->tx_stats.data_bytes);
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
- return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+static ssize_t iwl_dbgfs_tx_statistics_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data;
+ u32 clear_flag;
+ char buf[8];
+ int buf_size;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ if (sscanf(buf, "%x", &clear_flag) != 1)
+ return -EFAULT;
+ if (clear_flag == 1)
+ iwl_clear_tx_stats(priv);
+
+ return count;
}
static ssize_t iwl_dbgfs_rx_statistics_read(struct file *file,
@@ -143,18 +185,59 @@
size_t count, loff_t *ppos) {
struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
- char buf[256];
+ char *buf;
int pos = 0;
- const size_t bufsz = sizeof(buf);
+ int cnt;
+ ssize_t ret;
+ const size_t bufsz = 100 +
+ sizeof(char) * 24 * (MANAGEMENT_MAX + CONTROL_MAX);
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
- pos += scnprintf(buf + pos, bufsz - pos, "mgmt: %u\n",
- priv->rx_stats[0].cnt);
- pos += scnprintf(buf + pos, bufsz - pos, "ctrl: %u\n",
- priv->rx_stats[1].cnt);
- pos += scnprintf(buf + pos, bufsz - pos, "data: %u\n",
- priv->rx_stats[2].cnt);
+ pos += scnprintf(buf + pos, bufsz - pos, "Management:\n");
+ for (cnt = 0; cnt < MANAGEMENT_MAX; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\t%s\t\t: %u\n",
+ get_mgmt_string(cnt),
+ priv->rx_stats.mgmt[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "Control:\n");
+ for (cnt = 0; cnt < CONTROL_MAX; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\t%s\t\t: %u\n",
+ get_ctrl_string(cnt),
+ priv->rx_stats.ctrl[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "Data:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "\tcnt: %u\n",
+ priv->rx_stats.data_cnt);
+ pos += scnprintf(buf + pos, bufsz - pos, "\tbytes: %llu\n",
+ priv->rx_stats.data_bytes);
- return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_rx_statistics_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data;
+ u32 clear_flag;
+ char buf[8];
+ int buf_size;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ if (sscanf(buf, "%x", &clear_flag) != 1)
+ return -EFAULT;
+ if (clear_flag == 1)
+ iwl_clear_rx_stats(priv);
+ return count;
}
#define BYTE1_MASK 0x000000ff;
@@ -566,16 +649,982 @@
return count;
}
+static ssize_t iwl_dbgfs_qos_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0, i;
+ char buf[256];
+ const size_t bufsz = sizeof(buf);
+ ssize_t ret;
+
+ for (i = 0; i < AC_NUM; i++) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\tcw_min\tcw_max\taifsn\ttxop\n");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "AC[%d]\t%u\t%u\t%u\t%u\n", i,
+ priv->qos_data.def_qos_parm.ac[i].cw_min,
+ priv->qos_data.def_qos_parm.ac[i].cw_max,
+ priv->qos_data.def_qos_parm.ac[i].aifsn,
+ priv->qos_data.def_qos_parm.ac[i].edca_txop);
+ }
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ return ret;
+}
+
+#ifdef CONFIG_IWLWIFI_LEDS
+static ssize_t iwl_dbgfs_led_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ char buf[256];
+ const size_t bufsz = sizeof(buf);
+ ssize_t ret;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "allow blinking: %s\n",
+ (priv->allow_blinking) ? "True" : "False");
+ if (priv->allow_blinking) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Led blinking rate: %u\n",
+ priv->last_blink_rate);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Last blink time: %lu\n",
+ priv->last_blink_time);
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ return ret;
+}
+#endif
+
+static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+ char buf[100];
+ int pos = 0;
+ const size_t bufsz = sizeof(buf);
+ ssize_t ret;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Thermal Throttling Mode: %s\n",
+ tt->advanced_tt ? "Advance" : "Legacy");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Thermal Throttling State: %d\n",
+ tt->state);
+ if (tt->advanced_tt) {
+ restriction = tt->restriction + tt->state;
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Tx mode: %d\n",
+ restriction->tx_stream);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Rx mode: %d\n",
+ restriction->rx_stream);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "HT mode: %d\n",
+ restriction->is_ht);
+ }
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_disable_ht40_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data;
+ char buf[8];
+ int buf_size;
+ int ht40;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ if (sscanf(buf, "%d", &ht40) != 1)
+ return -EFAULT;
+ if (!iwl_is_associated(priv))
+ priv->disable_ht40 = ht40 ? true : false;
+ else {
+ IWL_ERR(priv, "Sta associated with AP - "
+ "Change to 40MHz channel support is not allowed\n");
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t iwl_dbgfs_disable_ht40_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ char buf[100];
+ int pos = 0;
+ const size_t bufsz = sizeof(buf);
+ ssize_t ret;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "11n 40MHz Mode: %s\n",
+ priv->disable_ht40 ? "Disabled" : "Enabled");
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_sleep_level_override_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data;
+ char buf[8];
+ int buf_size;
+ int value;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+
+ if (sscanf(buf, "%d", &value) != 1)
+ return -EINVAL;
+
+ /*
+ * Our users expect 0 to be "CAM", but 0 isn't actually
+ * valid here. However, let's not confuse them and present
+ * IWL_POWER_INDEX_1 as "1", not "0".
+ */
+ if (value > 0)
+ value -= 1;
+
+ if (value != -1 && (value < 0 || value >= IWL_POWER_NUM))
+ return -EINVAL;
+
+ priv->power_data.debug_sleep_level_override = value;
+
+ iwl_power_update_mode(priv, false);
+
+ return count;
+}
+
+static ssize_t iwl_dbgfs_sleep_level_override_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ char buf[10];
+ int pos, value;
+ const size_t bufsz = sizeof(buf);
+
+ /* see the write function */
+ value = priv->power_data.debug_sleep_level_override;
+ if (value >= 0)
+ value += 1;
+
+ pos = scnprintf(buf, bufsz, "%d\n", value);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_current_sleep_command_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ char buf[200];
+ int pos = 0, i;
+ const size_t bufsz = sizeof(buf);
+ struct iwl_powertable_cmd *cmd = &priv->power_data.sleep_cmd;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "flags: %#.2x\n", le16_to_cpu(cmd->flags));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "RX/TX timeout: %d/%d usec\n",
+ le32_to_cpu(cmd->rx_data_timeout),
+ le32_to_cpu(cmd->tx_data_timeout));
+ for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "sleep_interval[%d]: %d\n", i,
+ le32_to_cpu(cmd->sleep_interval[i]));
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
DEBUGFS_READ_WRITE_FILE_OPS(sram);
DEBUGFS_WRITE_FILE_OPS(log_event);
DEBUGFS_READ_FILE_OPS(nvm);
DEBUGFS_READ_FILE_OPS(stations);
-DEBUGFS_READ_FILE_OPS(rx_statistics);
-DEBUGFS_READ_FILE_OPS(tx_statistics);
DEBUGFS_READ_FILE_OPS(channels);
DEBUGFS_READ_FILE_OPS(status);
DEBUGFS_READ_WRITE_FILE_OPS(interrupt);
+DEBUGFS_READ_FILE_OPS(qos);
+#ifdef CONFIG_IWLWIFI_LEDS
+DEBUGFS_READ_FILE_OPS(led);
+#endif
+DEBUGFS_READ_FILE_OPS(thermal_throttling);
+DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40);
+DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override);
+DEBUGFS_READ_FILE_OPS(current_sleep_command);
+
+static ssize_t iwl_dbgfs_traffic_log_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data;
+ int pos = 0, ofs = 0;
+ int cnt = 0, entry;
+ struct iwl_tx_queue *txq;
+ struct iwl_queue *q;
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ char *buf;
+ int bufsz = ((IWL_TRAFFIC_ENTRIES * IWL_TRAFFIC_ENTRY_SIZE * 64) * 2) +
+ (IWL_MAX_NUM_QUEUES * 32 * 8) + 400;
+ const u8 *ptr;
+ ssize_t ret;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate buffer\n");
+ return -ENOMEM;
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "Tx Queue\n");
+ for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) {
+ txq = &priv->txq[cnt];
+ q = &txq->q;
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "q[%d]: read_ptr: %u, write_ptr: %u\n",
+ cnt, q->read_ptr, q->write_ptr);
+ }
+ if (priv->tx_traffic && (iwl_debug_level & IWL_DL_TX)) {
+ ptr = priv->tx_traffic;
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Tx Traffic idx: %u\n", priv->tx_traffic_idx);
+ for (cnt = 0, ofs = 0; cnt < IWL_TRAFFIC_ENTRIES; cnt++) {
+ for (entry = 0; entry < IWL_TRAFFIC_ENTRY_SIZE / 16;
+ entry++, ofs += 16) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "0x%.4x ", ofs);
+ hex_dump_to_buffer(ptr + ofs, 16, 16, 2,
+ buf + pos, bufsz - pos, 0);
+ pos += strlen(buf);
+ if (bufsz - pos > 0)
+ buf[pos++] = '\n';
+ }
+ }
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, "Rx Queue\n");
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "read: %u, write: %u\n",
+ rxq->read, rxq->write);
+
+ if (priv->rx_traffic && (iwl_debug_level & IWL_DL_RX)) {
+ ptr = priv->rx_traffic;
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "Rx Traffic idx: %u\n", priv->rx_traffic_idx);
+ for (cnt = 0, ofs = 0; cnt < IWL_TRAFFIC_ENTRIES; cnt++) {
+ for (entry = 0; entry < IWL_TRAFFIC_ENTRY_SIZE / 16;
+ entry++, ofs += 16) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "0x%.4x ", ofs);
+ hex_dump_to_buffer(ptr + ofs, 16, 16, 2,
+ buf + pos, bufsz - pos, 0);
+ pos += strlen(buf);
+ if (bufsz - pos > 0)
+ buf[pos++] = '\n';
+ }
+ }
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_traffic_log_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data;
+ char buf[8];
+ int buf_size;
+ int traffic_log;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ if (sscanf(buf, "%d", &traffic_log) != 1)
+ return -EFAULT;
+ if (traffic_log == 0)
+ iwl_reset_traffic_log(priv);
+
+ return count;
+}
+
+static ssize_t iwl_dbgfs_tx_queue_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos) {
+
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ struct iwl_tx_queue *txq;
+ struct iwl_queue *q;
+ char *buf;
+ int pos = 0;
+ int cnt;
+ int ret;
+ const size_t bufsz = sizeof(char) * 60 * IWL_MAX_NUM_QUEUES;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) {
+ txq = &priv->txq[cnt];
+ q = &txq->q;
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "hwq %.2d: read=%u write=%u stop=%d"
+ " swq_id=%#.2x (ac %d/hwq %d)\n",
+ cnt, q->read_ptr, q->write_ptr,
+ !!test_bit(cnt, priv->queue_stopped),
+ txq->swq_id,
+ txq->swq_id & 0x80 ? txq->swq_id & 3 :
+ txq->swq_id,
+ txq->swq_id & 0x80 ? (txq->swq_id >> 2) &
+ 0x1f : txq->swq_id);
+ if (cnt >= 4)
+ continue;
+ /* for the ACs, display the stop count too */
+ pos += scnprintf(buf + pos, bufsz - pos,
+ " stop-count: %d\n",
+ atomic_read(&priv->queue_stop_count[cnt]));
+ }
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_rx_queue_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos) {
+
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ char buf[256];
+ int pos = 0;
+ const size_t bufsz = sizeof(buf);
+
+ pos += scnprintf(buf + pos, bufsz - pos, "read: %u\n",
+ rxq->read);
+ pos += scnprintf(buf + pos, bufsz - pos, "write: %u\n",
+ rxq->write);
+ pos += scnprintf(buf + pos, bufsz - pos, "free_count: %u\n",
+ rxq->free_count);
+ pos += scnprintf(buf + pos, bufsz - pos, "closed_rb_num: %u\n",
+ le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+#define UCODE_STATISTICS_CLEAR_MSK (0x1 << 0)
+#define UCODE_STATISTICS_FREQUENCY_MSK (0x1 << 1)
+#define UCODE_STATISTICS_NARROW_BAND_MSK (0x1 << 2)
+
+static int iwl_dbgfs_statistics_flag(struct iwl_priv *priv, char *buf,
+ int bufsz)
+{
+ int p = 0;
+
+ p += scnprintf(buf + p, bufsz - p,
+ "Statistics Flag(0x%X):\n",
+ le32_to_cpu(priv->statistics.flag));
+ if (le32_to_cpu(priv->statistics.flag) & UCODE_STATISTICS_CLEAR_MSK)
+ p += scnprintf(buf + p, bufsz - p,
+ "\tStatistics have been cleared\n");
+ p += scnprintf(buf + p, bufsz - p,
+ "\tOperational Frequency: %s\n",
+ (le32_to_cpu(priv->statistics.flag) &
+ UCODE_STATISTICS_FREQUENCY_MSK)
+ ? "2.4 GHz" : "5.2 GHz");
+ p += scnprintf(buf + p, bufsz - p,
+ "\tTGj Narrow Band: %s\n",
+ (le32_to_cpu(priv->statistics.flag) &
+ UCODE_STATISTICS_NARROW_BAND_MSK)
+ ? "enabled" : "disabled");
+ return p;
+}
+
+
+static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ char *buf;
+ int bufsz = sizeof(struct statistics_rx_phy) * 20 +
+ sizeof(struct statistics_rx_non_phy) * 20 +
+ sizeof(struct statistics_rx_ht_phy) * 20 + 400;
+ ssize_t ret;
+ struct statistics_rx_phy *ofdm;
+ struct statistics_rx_phy *cck;
+ struct statistics_rx_non_phy *general;
+ struct statistics_rx_ht_phy *ht;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ /* make request to uCode to retrieve statistics information */
+ mutex_lock(&priv->mutex);
+ ret = iwl_send_statistics_request(priv, 0);
+ mutex_unlock(&priv->mutex);
+
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending statistics request: %zd\n", ret);
+ return -EAGAIN;
+ }
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /* the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ ofdm = &priv->statistics.rx.ofdm;
+ cck = &priv->statistics.rx.cck;
+ general = &priv->statistics.rx.general;
+ ht = &priv->statistics.rx.ofdm_ht;
+ pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt: %u\n",
+ le32_to_cpu(ofdm->ina_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt: %u\n",
+ le32_to_cpu(ofdm->fina_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
+ le32_to_cpu(ofdm->plcp_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
+ le32_to_cpu(ofdm->crc32_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
+ le32_to_cpu(ofdm->overrun_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
+ le32_to_cpu(ofdm->early_overrun_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
+ le32_to_cpu(ofdm->crc32_good));
+ pos += scnprintf(buf + pos, bufsz - pos, "false_alarm_cnt: %u\n",
+ le32_to_cpu(ofdm->false_alarm_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "fina_sync_err_cnt: %u\n",
+ le32_to_cpu(ofdm->fina_sync_err_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "sfd_timeout: %u\n",
+ le32_to_cpu(ofdm->sfd_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos, "fina_timeout: %u\n",
+ le32_to_cpu(ofdm->fina_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos, "unresponded_rts: %u\n",
+ le32_to_cpu(ofdm->unresponded_rts));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "rxe_frame_limit_overrun: %u\n",
+ le32_to_cpu(ofdm->rxe_frame_limit_overrun));
+ pos += scnprintf(buf + pos, bufsz - pos, "sent_ack_cnt: %u\n",
+ le32_to_cpu(ofdm->sent_ack_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "sent_cts_cnt: %u\n",
+ le32_to_cpu(ofdm->sent_cts_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "sent_ba_rsp_cnt: %u\n",
+ le32_to_cpu(ofdm->sent_ba_rsp_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "dsp_self_kill: %u\n",
+ le32_to_cpu(ofdm->dsp_self_kill));
+ pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
+ le32_to_cpu(ofdm->mh_format_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "re_acq_main_rssi_sum: %u\n",
+ le32_to_cpu(ofdm->re_acq_main_rssi_sum));
+
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - CCK:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt: %u\n",
+ le32_to_cpu(cck->ina_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt: %u\n",
+ le32_to_cpu(cck->fina_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
+ le32_to_cpu(cck->plcp_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
+ le32_to_cpu(cck->crc32_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
+ le32_to_cpu(cck->overrun_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
+ le32_to_cpu(cck->early_overrun_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
+ le32_to_cpu(cck->crc32_good));
+ pos += scnprintf(buf + pos, bufsz - pos, "false_alarm_cnt: %u\n",
+ le32_to_cpu(cck->false_alarm_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "fina_sync_err_cnt: %u\n",
+ le32_to_cpu(cck->fina_sync_err_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "sfd_timeout: %u\n",
+ le32_to_cpu(cck->sfd_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos, "fina_timeout: %u\n",
+ le32_to_cpu(cck->fina_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos, "unresponded_rts: %u\n",
+ le32_to_cpu(cck->unresponded_rts));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "rxe_frame_limit_overrun: %u\n",
+ le32_to_cpu(cck->rxe_frame_limit_overrun));
+ pos += scnprintf(buf + pos, bufsz - pos, "sent_ack_cnt: %u\n",
+ le32_to_cpu(cck->sent_ack_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "sent_cts_cnt: %u\n",
+ le32_to_cpu(cck->sent_cts_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "sent_ba_rsp_cnt: %u\n",
+ le32_to_cpu(cck->sent_ba_rsp_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "dsp_self_kill: %u\n",
+ le32_to_cpu(cck->dsp_self_kill));
+ pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
+ le32_to_cpu(cck->mh_format_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "re_acq_main_rssi_sum: %u\n",
+ le32_to_cpu(cck->re_acq_main_rssi_sum));
+
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - GENERAL:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "bogus_cts: %u\n",
+ le32_to_cpu(general->bogus_cts));
+ pos += scnprintf(buf + pos, bufsz - pos, "bogus_ack: %u\n",
+ le32_to_cpu(general->bogus_ack));
+ pos += scnprintf(buf + pos, bufsz - pos, "non_bssid_frames: %u\n",
+ le32_to_cpu(general->non_bssid_frames));
+ pos += scnprintf(buf + pos, bufsz - pos, "filtered_frames: %u\n",
+ le32_to_cpu(general->filtered_frames));
+ pos += scnprintf(buf + pos, bufsz - pos, "non_channel_beacons: %u\n",
+ le32_to_cpu(general->non_channel_beacons));
+ pos += scnprintf(buf + pos, bufsz - pos, "channel_beacons: %u\n",
+ le32_to_cpu(general->channel_beacons));
+ pos += scnprintf(buf + pos, bufsz - pos, "num_missed_bcon: %u\n",
+ le32_to_cpu(general->num_missed_bcon));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "adc_rx_saturation_time: %u\n",
+ le32_to_cpu(general->adc_rx_saturation_time));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "ina_detection_search_time: %u\n",
+ le32_to_cpu(general->ina_detection_search_time));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_a: %u\n",
+ le32_to_cpu(general->beacon_silence_rssi_a));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_b: %u\n",
+ le32_to_cpu(general->beacon_silence_rssi_b));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_c: %u\n",
+ le32_to_cpu(general->beacon_silence_rssi_c));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "interference_data_flag: %u\n",
+ le32_to_cpu(general->interference_data_flag));
+ pos += scnprintf(buf + pos, bufsz - pos, "channel_load: %u\n",
+ le32_to_cpu(general->channel_load));
+ pos += scnprintf(buf + pos, bufsz - pos, "dsp_false_alarms: %u\n",
+ le32_to_cpu(general->dsp_false_alarms));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_a: %u\n",
+ le32_to_cpu(general->beacon_rssi_a));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_b: %u\n",
+ le32_to_cpu(general->beacon_rssi_b));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_c: %u\n",
+ le32_to_cpu(general->beacon_rssi_c));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_a: %u\n",
+ le32_to_cpu(general->beacon_energy_a));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_b: %u\n",
+ le32_to_cpu(general->beacon_energy_b));
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_c: %u\n",
+ le32_to_cpu(general->beacon_energy_c));
+
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM_HT:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
+ le32_to_cpu(ht->plcp_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
+ le32_to_cpu(ht->overrun_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
+ le32_to_cpu(ht->early_overrun_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
+ le32_to_cpu(ht->crc32_good));
+ pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
+ le32_to_cpu(ht->crc32_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
+ le32_to_cpu(ht->mh_format_err));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg_crc32_good: %u\n",
+ le32_to_cpu(ht->agg_crc32_good));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg_mpdu_cnt: %u\n",
+ le32_to_cpu(ht->agg_mpdu_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt: %u\n",
+ le32_to_cpu(ht->agg_cnt));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ char *buf;
+ int bufsz = (sizeof(struct statistics_tx) * 24) + 250;
+ ssize_t ret;
+ struct statistics_tx *tx;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ /* make request to uCode to retrieve statistics information */
+ mutex_lock(&priv->mutex);
+ ret = iwl_send_statistics_request(priv, 0);
+ mutex_unlock(&priv->mutex);
+
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending statistics request: %zd\n", ret);
+ return -EAGAIN;
+ }
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /* the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ tx = &priv->statistics.tx;
+ pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Tx:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "preamble: %u\n",
+ le32_to_cpu(tx->preamble_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "rx_detected_cnt: %u\n",
+ le32_to_cpu(tx->rx_detected_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "bt_prio_defer_cnt: %u\n",
+ le32_to_cpu(tx->bt_prio_defer_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "bt_prio_kill_cnt: %u\n",
+ le32_to_cpu(tx->bt_prio_kill_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "few_bytes_cnt: %u\n",
+ le32_to_cpu(tx->few_bytes_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "cts_timeout: %u\n",
+ le32_to_cpu(tx->cts_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos, "ack_timeout: %u\n",
+ le32_to_cpu(tx->ack_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos, "expected_ack_cnt: %u\n",
+ le32_to_cpu(tx->expected_ack_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "actual_ack_cnt: %u\n",
+ le32_to_cpu(tx->actual_ack_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "dump_msdu_cnt: %u\n",
+ le32_to_cpu(tx->dump_msdu_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "burst_abort_next_frame_mismatch_cnt: %u\n",
+ le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "burst_abort_missing_next_frame_cnt: %u\n",
+ le32_to_cpu(tx->burst_abort_missing_next_frame_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "cts_timeout_collision: %u\n",
+ le32_to_cpu(tx->cts_timeout_collision));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "ack_or_ba_timeout_collision: %u\n",
+ le32_to_cpu(tx->ack_or_ba_timeout_collision));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg ba_timeout: %u\n",
+ le32_to_cpu(tx->agg.ba_timeout));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "agg ba_reschedule_frames: %u\n",
+ le32_to_cpu(tx->agg.ba_reschedule_frames));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "agg scd_query_agg_frame_cnt: %u\n",
+ le32_to_cpu(tx->agg.scd_query_agg_frame_cnt));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg scd_query_no_agg: %u\n",
+ le32_to_cpu(tx->agg.scd_query_no_agg));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg scd_query_agg: %u\n",
+ le32_to_cpu(tx->agg.scd_query_agg));
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "agg scd_query_mismatch: %u\n",
+ le32_to_cpu(tx->agg.scd_query_mismatch));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg frame_not_ready: %u\n",
+ le32_to_cpu(tx->agg.frame_not_ready));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg underrun: %u\n",
+ le32_to_cpu(tx->agg.underrun));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg bt_prio_kill: %u\n",
+ le32_to_cpu(tx->agg.bt_prio_kill));
+ pos += scnprintf(buf + pos, bufsz - pos, "agg rx_ba_rsp_cnt: %u\n",
+ le32_to_cpu(tx->agg.rx_ba_rsp_cnt));
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ char *buf;
+ int bufsz = sizeof(struct statistics_general) * 4 + 250;
+ ssize_t ret;
+ struct statistics_general *general;
+ struct statistics_dbg *dbg;
+ struct statistics_div *div;
+
+ if (!iwl_is_alive(priv))
+ return -EAGAIN;
+
+ /* make request to uCode to retrieve statistics information */
+ mutex_lock(&priv->mutex);
+ ret = iwl_send_statistics_request(priv, 0);
+ mutex_unlock(&priv->mutex);
+
+ if (ret) {
+ IWL_ERR(priv,
+ "Error sending statistics request: %zd\n", ret);
+ return -EAGAIN;
+ }
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ /* the statistic information display here is based on
+ * the last statistics notification from uCode
+ * might not reflect the current uCode activity
+ */
+ general = &priv->statistics.general;
+ dbg = &priv->statistics.general.dbg;
+ div = &priv->statistics.general.div;
+ pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
+ pos += scnprintf(buf + pos, bufsz - pos, "Statistics_General:\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "temperature: %u\n",
+ le32_to_cpu(general->temperature));
+ pos += scnprintf(buf + pos, bufsz - pos, "temperature_m: %u\n",
+ le32_to_cpu(general->temperature_m));
+ pos += scnprintf(buf + pos, bufsz - pos, "burst_check: %u\n",
+ le32_to_cpu(dbg->burst_check));
+ pos += scnprintf(buf + pos, bufsz - pos, "burst_count: %u\n",
+ le32_to_cpu(dbg->burst_count));
+ pos += scnprintf(buf + pos, bufsz - pos, "sleep_time: %u\n",
+ le32_to_cpu(general->sleep_time));
+ pos += scnprintf(buf + pos, bufsz - pos, "slots_out: %u\n",
+ le32_to_cpu(general->slots_out));
+ pos += scnprintf(buf + pos, bufsz - pos, "slots_idle: %u\n",
+ le32_to_cpu(general->slots_idle));
+ pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp: %u\n",
+ le32_to_cpu(general->ttl_timestamp));
+ pos += scnprintf(buf + pos, bufsz - pos, "tx_on_a: %u\n",
+ le32_to_cpu(div->tx_on_a));
+ pos += scnprintf(buf + pos, bufsz - pos, "tx_on_b: %u\n",
+ le32_to_cpu(div->tx_on_b));
+ pos += scnprintf(buf + pos, bufsz - pos, "exec_time: %u\n",
+ le32_to_cpu(div->exec_time));
+ pos += scnprintf(buf + pos, bufsz - pos, "probe_time: %u\n",
+ le32_to_cpu(div->probe_time));
+ pos += scnprintf(buf + pos, bufsz - pos, "rx_enable_counter: %u\n",
+ le32_to_cpu(general->rx_enable_counter));
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_sensitivity_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos) {
+
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ int cnt = 0;
+ char *buf;
+ int bufsz = sizeof(struct iwl_sensitivity_data) * 4 + 100;
+ ssize_t ret;
+ struct iwl_sensitivity_data *data;
+
+ data = &priv->sensitivity_data;
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm:\t\t\t %u\n",
+ data->auto_corr_ofdm);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "auto_corr_ofdm_mrc:\t\t %u\n",
+ data->auto_corr_ofdm_mrc);
+ pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm_x1:\t\t %u\n",
+ data->auto_corr_ofdm_x1);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "auto_corr_ofdm_mrc_x1:\t\t %u\n",
+ data->auto_corr_ofdm_mrc_x1);
+ pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck:\t\t\t %u\n",
+ data->auto_corr_cck);
+ pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck_mrc:\t\t %u\n",
+ data->auto_corr_cck_mrc);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "last_bad_plcp_cnt_ofdm:\t\t %u\n",
+ data->last_bad_plcp_cnt_ofdm);
+ pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_ofdm:\t\t %u\n",
+ data->last_fa_cnt_ofdm);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "last_bad_plcp_cnt_cck:\t\t %u\n",
+ data->last_bad_plcp_cnt_cck);
+ pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_cck:\t\t %u\n",
+ data->last_fa_cnt_cck);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_curr_state:\t\t\t %u\n",
+ data->nrg_curr_state);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_prev_state:\t\t\t %u\n",
+ data->nrg_prev_state);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_value:\t\t\t");
+ for (cnt = 0; cnt < 10; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos, " %u",
+ data->nrg_value[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_rssi:\t\t");
+ for (cnt = 0; cnt < NRG_NUM_PREV_STAT_L; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos, " %u",
+ data->nrg_silence_rssi[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_ref:\t\t %u\n",
+ data->nrg_silence_ref);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_energy_idx:\t\t\t %u\n",
+ data->nrg_energy_idx);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_idx:\t\t %u\n",
+ data->nrg_silence_idx);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_cck:\t\t\t %u\n",
+ data->nrg_th_cck);
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "nrg_auto_corr_silence_diff:\t %u\n",
+ data->nrg_auto_corr_silence_diff);
+ pos += scnprintf(buf + pos, bufsz - pos, "num_in_cck_no_fa:\t\t %u\n",
+ data->num_in_cck_no_fa);
+ pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_ofdm:\t\t\t %u\n",
+ data->nrg_th_ofdm);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+
+static ssize_t iwl_dbgfs_chain_noise_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos) {
+
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ int pos = 0;
+ int cnt = 0;
+ char *buf;
+ int bufsz = sizeof(struct iwl_chain_noise_data) * 4 + 100;
+ ssize_t ret;
+ struct iwl_chain_noise_data *data;
+
+ data = &priv->chain_noise_data;
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf) {
+ IWL_ERR(priv, "Can not allocate Buffer\n");
+ return -ENOMEM;
+ }
+
+ pos += scnprintf(buf + pos, bufsz - pos, "active_chains:\t\t\t %u\n",
+ data->active_chains);
+ pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_a:\t\t\t %u\n",
+ data->chain_noise_a);
+ pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_b:\t\t\t %u\n",
+ data->chain_noise_b);
+ pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_c:\t\t\t %u\n",
+ data->chain_noise_c);
+ pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_a:\t\t\t %u\n",
+ data->chain_signal_a);
+ pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_b:\t\t\t %u\n",
+ data->chain_signal_b);
+ pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_c:\t\t\t %u\n",
+ data->chain_signal_c);
+ pos += scnprintf(buf + pos, bufsz - pos, "beacon_count:\t\t\t %u\n",
+ data->beacon_count);
+
+ pos += scnprintf(buf + pos, bufsz - pos, "disconn_array:\t\t\t");
+ for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos, " %u",
+ data->disconn_array[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "delta_gain_code:\t\t");
+ for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) {
+ pos += scnprintf(buf + pos, bufsz - pos, " %u",
+ data->delta_gain_code[cnt]);
+ }
+ pos += scnprintf(buf + pos, bufsz - pos, "\n");
+ pos += scnprintf(buf + pos, bufsz - pos, "radio_write:\t\t\t %u\n",
+ data->radio_write);
+ pos += scnprintf(buf + pos, bufsz - pos, "state:\t\t\t\t %u\n",
+ data->state);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t iwl_dbgfs_tx_power_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos) {
+
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+ char buf[128];
+ int pos = 0;
+ ssize_t ret;
+ const size_t bufsz = sizeof(buf);
+ struct statistics_tx *tx;
+
+ if (!iwl_is_alive(priv))
+ pos += scnprintf(buf + pos, bufsz - pos, "N/A\n");
+ else {
+ /* make request to uCode to retrieve statistics information */
+ mutex_lock(&priv->mutex);
+ ret = iwl_send_statistics_request(priv, 0);
+ mutex_unlock(&priv->mutex);
+
+ if (ret) {
+ IWL_ERR(priv, "Error sending statistics request: %zd\n",
+ ret);
+ return -EAGAIN;
+ }
+ tx = &priv->statistics.tx;
+ if (tx->tx_power.ant_a ||
+ tx->tx_power.ant_b ||
+ tx->tx_power.ant_c) {
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "tx power: (1/2 dB step)\n");
+ if ((priv->cfg->valid_tx_ant & ANT_A) &&
+ tx->tx_power.ant_a)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\tantenna A: 0x%X\n",
+ tx->tx_power.ant_a);
+ if ((priv->cfg->valid_tx_ant & ANT_B) &&
+ tx->tx_power.ant_b)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\tantenna B: 0x%X\n",
+ tx->tx_power.ant_b);
+ if ((priv->cfg->valid_tx_ant & ANT_C) &&
+ tx->tx_power.ant_c)
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "\tantenna C: 0x%X\n",
+ tx->tx_power.ant_c);
+ } else
+ pos += scnprintf(buf + pos, bufsz - pos, "N/A\n");
+ }
+ return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+DEBUGFS_READ_WRITE_FILE_OPS(rx_statistics);
+DEBUGFS_READ_WRITE_FILE_OPS(tx_statistics);
+DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
+DEBUGFS_READ_FILE_OPS(rx_queue);
+DEBUGFS_READ_FILE_OPS(tx_queue);
+DEBUGFS_READ_FILE_OPS(ucode_rx_stats);
+DEBUGFS_READ_FILE_OPS(ucode_tx_stats);
+DEBUGFS_READ_FILE_OPS(ucode_general_stats);
+DEBUGFS_READ_FILE_OPS(sensitivity);
+DEBUGFS_READ_FILE_OPS(chain_noise);
+DEBUGFS_READ_FILE_OPS(tx_power);
/*
* Create the debugfs files and directories
@@ -603,19 +1652,42 @@
DEBUGFS_ADD_DIR(data, dbgfs->dir_drv);
DEBUGFS_ADD_DIR(rf, dbgfs->dir_drv);
+ DEBUGFS_ADD_DIR(debug, dbgfs->dir_drv);
DEBUGFS_ADD_FILE(nvm, data);
DEBUGFS_ADD_FILE(sram, data);
DEBUGFS_ADD_FILE(log_event, data);
DEBUGFS_ADD_FILE(stations, data);
- DEBUGFS_ADD_FILE(rx_statistics, data);
- DEBUGFS_ADD_FILE(tx_statistics, data);
DEBUGFS_ADD_FILE(channels, data);
DEBUGFS_ADD_FILE(status, data);
DEBUGFS_ADD_FILE(interrupt, data);
+ DEBUGFS_ADD_FILE(qos, data);
+#ifdef CONFIG_IWLWIFI_LEDS
+ DEBUGFS_ADD_FILE(led, data);
+#endif
+ DEBUGFS_ADD_FILE(sleep_level_override, data);
+ DEBUGFS_ADD_FILE(current_sleep_command, data);
+ DEBUGFS_ADD_FILE(thermal_throttling, data);
+ DEBUGFS_ADD_FILE(disable_ht40, data);
+ DEBUGFS_ADD_FILE(rx_statistics, debug);
+ DEBUGFS_ADD_FILE(tx_statistics, debug);
+ DEBUGFS_ADD_FILE(traffic_log, debug);
+ DEBUGFS_ADD_FILE(rx_queue, debug);
+ DEBUGFS_ADD_FILE(tx_queue, debug);
+ DEBUGFS_ADD_FILE(tx_power, debug);
+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
+ DEBUGFS_ADD_FILE(ucode_rx_stats, debug);
+ DEBUGFS_ADD_FILE(ucode_tx_stats, debug);
+ DEBUGFS_ADD_FILE(ucode_general_stats, debug);
+ DEBUGFS_ADD_FILE(sensitivity, debug);
+ DEBUGFS_ADD_FILE(chain_noise, debug);
+ }
DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
&priv->disable_chain_noise_cal);
- DEBUGFS_ADD_BOOL(disable_tx_power, rf, &priv->disable_tx_power_cal);
+ if (((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) ||
+ ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_3945))
+ DEBUGFS_ADD_BOOL(disable_tx_power, rf,
+ &priv->disable_tx_power_cal);
return 0;
err:
@@ -634,19 +1706,46 @@
if (!priv->dbgfs)
return;
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sleep_level_override);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_current_sleep_command);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_nvm);
- DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_rx_statistics);
- DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_tx_statistics);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_sram);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_log_event);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_channels);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_interrupt);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_qos);
+#ifdef CONFIG_IWLWIFI_LEDS
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_led);
+#endif
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_thermal_throttling);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_disable_ht40);
DEBUGFS_REMOVE(priv->dbgfs->dir_data);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_rx_statistics);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_statistics);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_traffic_log);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_rx_queue);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_queue);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_power);
+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+ file_ucode_rx_stats);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+ file_ucode_tx_stats);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+ file_ucode_general_stats);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+ file_sensitivity);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+ file_chain_noise);
+ }
+ DEBUGFS_REMOVE(priv->dbgfs->dir_debug);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise);
- DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_tx_power);
+ if (((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) ||
+ ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_3945))
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_tx_power);
DEBUGFS_REMOVE(priv->dbgfs->dir_rf);
DEBUGFS_REMOVE(priv->dbgfs->dir_drv);
kfree(priv->dbgfs);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 650e20a..028d505 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -56,16 +56,19 @@
extern struct iwl_cfg iwl5100_bg_cfg;
extern struct iwl_cfg iwl5100_abg_cfg;
extern struct iwl_cfg iwl5150_agn_cfg;
-extern struct iwl_cfg iwl6000_2ag_cfg;
-extern struct iwl_cfg iwl6000_2agn_cfg;
+extern struct iwl_cfg iwl6000h_2agn_cfg;
+extern struct iwl_cfg iwl6000i_2agn_cfg;
extern struct iwl_cfg iwl6000_3agn_cfg;
extern struct iwl_cfg iwl6050_2agn_cfg;
extern struct iwl_cfg iwl6050_3agn_cfg;
extern struct iwl_cfg iwl1000_bgn_cfg;
+struct iwl_tx_queue;
+
/* shared structures from iwl-5000.c */
extern struct iwl_mod_params iwl50_mod_params;
extern struct iwl_ops iwl5000_ops;
+extern struct iwl_ucode_ops iwl5000_ucode;
extern struct iwl_lib_ops iwl5000_lib;
extern struct iwl_hcmd_ops iwl5000_hcmd;
extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
@@ -78,9 +81,37 @@
__le32 *tx_flags);
extern int iwl5000_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp);
+extern int iwl5000_apm_init(struct iwl_priv *priv);
+extern void iwl5000_apm_stop(struct iwl_priv *priv);
+extern int iwl5000_apm_reset(struct iwl_priv *priv);
+extern void iwl5000_nic_config(struct iwl_priv *priv);
+extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
+extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
+ size_t offset);
+extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq,
+ u16 byte_cnt);
+extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq);
+extern int iwl5000_load_ucode(struct iwl_priv *priv);
+extern void iwl5000_init_alive_start(struct iwl_priv *priv);
+extern int iwl5000_alive_notify(struct iwl_priv *priv);
+extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
+extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
+ int tx_fifo, int sta_id, int tid, u16 ssn_idx);
+extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
+ u16 ssn_idx, u8 tx_fifo);
+extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
+extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
+extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
+extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
+extern int iwl5000_send_tx_power(struct iwl_priv *priv);
+extern void iwl5000_temperature(struct iwl_priv *priv);
/* CT-KILL constants */
-#define CT_KILL_THRESHOLD 110 /* in Celsius */
+#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
+#define CT_KILL_THRESHOLD 114 /* in Celsius */
+#define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */
/* Default noise level to report when noise measurement is not available.
* This may be because we're:
@@ -119,6 +150,31 @@
struct list_head list;
};
+/* defined below */
+struct iwl_device_cmd;
+
+struct iwl_cmd_meta {
+ /* only for SYNC commands, iff the reply skb is wanted */
+ struct iwl_host_cmd *source;
+ /*
+ * only for ASYNC commands
+ * (which is somewhat stupid -- look at iwl-sta.c for instance
+ * which duplicates a bunch of code because the callback isn't
+ * invoked for SYNC commands, if it were and its result passed
+ * through it would be simpler...)
+ */
+ void (*callback)(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb);
+
+ /* The CMD_SIZE_HUGE flag bit indicates that the command
+ * structure is stored at the end of the shared queue memory. */
+ u32 flags;
+
+ DECLARE_PCI_UNMAP_ADDR(mapping)
+ DECLARE_PCI_UNMAP_LEN(len)
+};
+
/*
* Generic queue structure
*
@@ -146,7 +202,8 @@
* struct iwl_tx_queue - Tx Queue for DMA
* @q: generic Rx/Tx queue descriptor
* @bd: base of circular buffer of TFDs
- * @cmd: array of command/Tx buffers
+ * @cmd: array of command/TX buffer pointers
+ * @meta: array of meta data for each command/tx buffer
* @dma_addr_cmd: physical address of cmd/tx buffer array
* @txb: array of per-TFD driver data
* @need_update: indicates need to update read/write index
@@ -161,7 +218,8 @@
struct iwl_tx_queue {
struct iwl_queue q;
void *tfds;
- struct iwl_cmd *cmd[TFD_TX_CMD_SLOTS];
+ struct iwl_device_cmd **cmd;
+ struct iwl_cmd_meta *meta;
struct iwl_tx_info *txb;
u8 need_update;
u8 sched_retry;
@@ -219,8 +277,8 @@
struct iwl4965_channel_tgd_info tgd;
struct iwl4965_channel_tgh_info tgh;
struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
- struct iwl_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for
- * FAT channel */
+ struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
+ * HT40 channel */
u8 channel; /* channel number */
u8 flags; /* flags copied from EEPROM */
@@ -233,13 +291,13 @@
u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
enum ieee80211_band band;
- /* FAT channel info */
- s8 fat_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
- s8 fat_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */
- s8 fat_min_power; /* always 0 */
- s8 fat_scan_power; /* (dBm) eeprom, direct scans, any rate */
- u8 fat_flags; /* flags copied from EEPROM */
- u8 fat_extension_channel; /* HT_IE_EXT_CHANNEL_* */
+ /* HT40 channel info */
+ s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
+ s8 ht40_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */
+ s8 ht40_min_power; /* always 0 */
+ s8 ht40_scan_power; /* (dBm) eeprom, direct scans, any rate */
+ u8 ht40_flags; /* flags copied from EEPROM */
+ u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
/* Radio/DSP gain settings for each "normal" data Tx rate.
* These include, in addition to RF and DSP gain, a few fields for
@@ -298,35 +356,16 @@
CMD_WANT_SKB = (1 << 2),
};
-struct iwl_cmd;
-struct iwl_priv;
-
-struct iwl_cmd_meta {
- struct iwl_cmd_meta *source;
- union {
- struct sk_buff *skb;
- int (*callback)(struct iwl_priv *priv,
- struct iwl_cmd *cmd, struct sk_buff *skb);
- } __attribute__ ((packed)) u;
-
- /* The CMD_SIZE_HUGE flag bit indicates that the command
- * structure is stored at the end of the shared queue memory. */
- u32 flags;
- DECLARE_PCI_UNMAP_ADDR(mapping)
- DECLARE_PCI_UNMAP_LEN(len)
-} __attribute__ ((packed));
-
#define IWL_CMD_MAX_PAYLOAD 320
/**
- * struct iwl_cmd
+ * struct iwl_device_cmd
*
* For allocation of the command and tx queues, this establishes the overall
* size of the largest command we send to uCode, except for a scan command
* (which is relatively huge; space is allocated separately).
*/
-struct iwl_cmd {
- struct iwl_cmd_meta meta; /* driver data */
+struct iwl_device_cmd {
struct iwl_cmd_header hdr; /* uCode API */
union {
u32 flags;
@@ -338,17 +377,20 @@
} __attribute__ ((packed)) cmd;
} __attribute__ ((packed));
+#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
+
struct iwl_host_cmd {
- u8 id;
- u16 len;
- struct iwl_cmd_meta meta;
const void *data;
+ struct sk_buff *reply_skb;
+ void (*callback)(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb);
+ u32 flags;
+ u16 len;
+ u8 id;
};
-#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_cmd) - \
- sizeof(struct iwl_cmd_meta))
-
/*
* RX related structures and functions
*/
@@ -449,23 +491,25 @@
};
#define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3)
-#define CFG_HT_MPDU_DENSITY_2USEC (0x5)
-#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_2USEC
+
+/*
+ * Maximal MPDU density for TX aggregation
+ * 4 - 2us density
+ * 5 - 4us density
+ * 6 - 8us density
+ * 7 - 16us density
+ */
+#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
+#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
struct iwl_ht_info {
/* self configuration data */
u8 is_ht;
u8 supported_chan_width;
u8 sm_ps;
- u8 is_green_field;
- u8 sgf; /* HT_SHORT_GI_* short guard interval */
- u8 max_amsdu_size;
- u8 ampdu_factor;
- u8 mpdu_density;
struct ieee80211_mcs_info mcs;
/* BSS related data */
u8 extension_chan_offset;
- u8 tx_chan_width;
u8 ht_protection;
u8 non_GF_STA_present;
};
@@ -525,15 +569,29 @@
};
/* uCode file layout */
-struct iwl_ucode {
- __le32 ver; /* major/minor/API/serial */
- __le32 inst_size; /* bytes of runtime instructions */
- __le32 data_size; /* bytes of runtime data */
- __le32 init_size; /* bytes of initialization instructions */
- __le32 init_data_size; /* bytes of initialization data */
- __le32 boot_size; /* bytes of bootstrap instructions */
- u8 data[0]; /* data in same order as "size" elements */
+struct iwl_ucode_header {
+ __le32 ver; /* major/minor/API/serial */
+ union {
+ struct {
+ __le32 inst_size; /* bytes of runtime code */
+ __le32 data_size; /* bytes of runtime data */
+ __le32 init_size; /* bytes of init code */
+ __le32 init_data_size; /* bytes of init data */
+ __le32 boot_size; /* bytes of bootstrap code */
+ u8 data[0]; /* in same order as sizes */
+ } v1;
+ struct {
+ __le32 build; /* build number */
+ __le32 inst_size; /* bytes of runtime code */
+ __le32 data_size; /* bytes of runtime data */
+ __le32 init_size; /* bytes of init code */
+ __le32 init_data_size; /* bytes of init data */
+ __le32 boot_size; /* bytes of bootstrap code */
+ u8 data[0]; /* in same order as sizes */
+ } v2;
+ } u;
};
+#define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
struct iwl4965_ibss_seq {
u8 mac[ETH_ALEN];
@@ -585,7 +643,7 @@
* @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
* @max_stations:
* @bcast_sta_id:
- * @fat_channel: is 40MHz width possible in band 2.4
+ * @ht40_channel: is 40MHz width possible in band 2.4
* BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
* @sw_crypto: 0 for hw, 1 for sw
* @max_xxx_size: for ucode uses
@@ -609,12 +667,14 @@
u32 max_pkt_size;
u8 max_stations;
u8 bcast_sta_id;
- u8 fat_channel;
- u8 sw_crypto;
+ u8 ht40_channel;
+ u8 max_beacon_itrvl; /* in 1024 ms */
u32 max_inst_size;
u32 max_data_size;
u32 max_bsm_size;
u32 ct_kill_threshold; /* value in hw-dependent units */
+ u32 ct_kill_exit_threshold; /* value in hw-dependent units */
+ /* for 1000, 6000 series and up */
u32 calib_init_cfg;
const struct iwl_sensitivity_ranges *sens;
};
@@ -666,9 +726,6 @@
size_t size;
};
-#define HT_SHORT_GI_20MHZ (1 << 0)
-#define HT_SHORT_GI_40MHZ (1 << 1)
-
#define IWL_CHANNEL_WIDTH_20MHZ 0
#define IWL_CHANNEL_WIDTH_40MHZ 1
@@ -809,6 +866,8 @@
#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
+#define IWL_TRAFFIC_ENTRIES (256)
+#define IWL_TRAFFIC_ENTRY_SIZE (64)
enum {
MEASUREMENT_READY = (1 << 0),
@@ -820,6 +879,30 @@
NVM_DEVICE_TYPE_OTP,
};
+/*
+ * Two types of OTP memory access modes
+ * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
+ * based on physical memory addressing
+ * IWL_OTP_ACCESS_RELATIVE - relative address mode,
+ * based on logical memory addressing
+ */
+enum iwl_access_mode {
+ IWL_OTP_ACCESS_ABSOLUTE,
+ IWL_OTP_ACCESS_RELATIVE,
+};
+
+/**
+ * enum iwl_pa_type - Power Amplifier type
+ * @IWL_PA_SYSTEM: based on uCode configuration
+ * @IWL_PA_HYBRID: use both Internal and external PA
+ * @IWL_PA_INTERNAL: use Internal only
+ */
+enum iwl_pa_type {
+ IWL_PA_SYSTEM = 0,
+ IWL_PA_HYBRID = 1,
+ IWL_PA_INTERNAL = 2,
+};
+
/* interrupt statistics */
struct isr_statistics {
u32 hw;
@@ -836,6 +919,48 @@
u32 unhandled;
};
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+/* management statistics */
+enum iwl_mgmt_stats {
+ MANAGEMENT_ASSOC_REQ = 0,
+ MANAGEMENT_ASSOC_RESP,
+ MANAGEMENT_REASSOC_REQ,
+ MANAGEMENT_REASSOC_RESP,
+ MANAGEMENT_PROBE_REQ,
+ MANAGEMENT_PROBE_RESP,
+ MANAGEMENT_BEACON,
+ MANAGEMENT_ATIM,
+ MANAGEMENT_DISASSOC,
+ MANAGEMENT_AUTH,
+ MANAGEMENT_DEAUTH,
+ MANAGEMENT_ACTION,
+ MANAGEMENT_MAX,
+};
+/* control statistics */
+enum iwl_ctrl_stats {
+ CONTROL_BACK_REQ = 0,
+ CONTROL_BACK,
+ CONTROL_PSPOLL,
+ CONTROL_RTS,
+ CONTROL_CTS,
+ CONTROL_ACK,
+ CONTROL_CFEND,
+ CONTROL_CFENDACK,
+ CONTROL_MAX,
+};
+
+struct traffic_stats {
+ u32 mgmt[MANAGEMENT_MAX];
+ u32 ctrl[CONTROL_MAX];
+ u32 data_cnt;
+ u64 data_bytes;
+};
+#else
+struct traffic_stats {
+ u64 data_bytes;
+};
+#endif
+
#define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */
struct iwl_priv {
@@ -981,15 +1106,14 @@
int last_rx_noise; /* From beacon statistics */
/* counts mgmt, ctl, and data packets */
- struct traffic_stats {
- u32 cnt;
- u64 bytes;
- } tx_stats[3], rx_stats[3];
+ struct traffic_stats tx_stats;
+ struct traffic_stats rx_stats;
/* counts interrupts */
struct isr_statistics isr_stats;
struct iwl_power_mgr power_data;
+ struct iwl_tt_mgmt thermal_throttle;
struct iwl_notif_statistics statistics;
unsigned long last_statistics_time;
@@ -997,7 +1121,6 @@
/* context information */
u16 rates_mask;
- u32 power_mode;
u8 bssid[ETH_ALEN];
u16 rts_threshold;
u8 mac_addr[ETH_ALEN];
@@ -1047,7 +1170,7 @@
struct iwl_hw_params hw_params;
/* INT ICT Table */
- u32 *ict_tbl;
+ __le32 *ict_tbl;
dma_addr_t ict_tbl_dma;
dma_addr_t aligned_ict_tbl_dma;
int ict_index;
@@ -1076,6 +1199,9 @@
struct work_struct report_work;
struct work_struct request_scan;
struct work_struct beacon_update;
+ struct work_struct tt_work;
+ struct work_struct ct_enter;
+ struct work_struct ct_exit;
struct tasklet_struct irq_tasklet;
@@ -1089,16 +1215,22 @@
/* TX Power */
s8 tx_power_user_lmt;
- s8 tx_power_channel_lmt;
+ s8 tx_power_device_lmt;
#ifdef CONFIG_IWLWIFI_DEBUG
/* debugging info */
- u32 debug_level;
+ u32 debug_level; /* per device debugging will override global
+ iwl_debug_level if set */
u32 framecnt_to_us;
atomic_t restrict_refcnt;
+ bool disable_ht40;
#ifdef CONFIG_IWLWIFI_DEBUGFS
/* debugfs */
+ u16 tx_traffic_idx;
+ u16 rx_traffic_idx;
+ u8 *tx_traffic;
+ u8 *rx_traffic;
struct iwl_debugfs *dbgfs;
#endif /* CONFIG_IWLWIFI_DEBUGFS */
#endif /* CONFIG_IWLWIFI_DEBUG */
@@ -1130,8 +1262,27 @@
#ifdef CONFIG_IWLWIFI_DEBUG
const char *iwl_get_tx_fail_reason(u32 status);
+/*
+ * iwl_get_debug_level: Return active debug level for device
+ *
+ * Using sysfs it is possible to set per device debug level. This debug
+ * level will be used if set, otherwise the global debug level which can be
+ * set via module parameter is used.
+ */
+static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
+{
+ if (priv->debug_level)
+ return priv->debug_level;
+ else
+ return iwl_debug_level;
+}
#else
static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
+
+static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
+{
+ return iwl_debug_level;
+}
#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 7d7554a..3d2b93a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -127,14 +127,86 @@
145, 149, 153, 157, 161, 165
};
-static const u8 iwl_eeprom_band_6[] = { /* 2.4 FAT channel */
+static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
1, 2, 3, 4, 5, 6, 7
};
-static const u8 iwl_eeprom_band_7[] = { /* 5.2 FAT channel */
+static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};
+/**
+ * struct iwl_txpwr_section: eeprom section information
+ * @offset: indirect address into eeprom image
+ * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
+ * @band: band type for the section
+ * @is_common - true: common section, false: channel section
+ * @is_cck - true: cck section, false: not cck section
+ * @is_ht_40 - true: all channel in the section are HT40 channel,
+ * false: legacy or HT 20 MHz
+ * ignore if it is common section
+ * @iwl_eeprom_section_channel: channel array in the section,
+ * ignore if common section
+ */
+struct iwl_txpwr_section {
+ u32 offset;
+ u8 count;
+ enum ieee80211_band band;
+ bool is_common;
+ bool is_cck;
+ bool is_ht40;
+ u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
+};
+
+/**
+ * section 1 - 3 are regulatory tx power apply to all channels based on
+ * modulation: CCK, OFDM
+ * Band: 2.4GHz, 5.2GHz
+ * section 4 - 10 are regulatory tx power apply to specified channels
+ * For example:
+ * 1L - Channel 1 Legacy
+ * 1HT - Channel 1 HT
+ * (1,+1) - Channel 1 HT40 "_above_"
+ *
+ * Section 1: all CCK channels
+ * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
+ * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
+ * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
+ * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
+ * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
+ * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
+ * Section 8: 2.4 GHz channel: 13L, 13HT
+ * Section 9: 2.4 GHz channel: 140L, 140HT
+ * Section 10: 2.4 GHz 40MHz channels: (132,+1) (44,+1)
+ *
+ */
+static const struct iwl_txpwr_section enhinfo[] = {
+ { EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
+ { EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
+ { EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
+ { EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
+ false, false, false,
+ {1, 1, 2, 2, 10, 10, 11, 11 } },
+ { EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
+ false, false, true,
+ { 1, 2, 6, 7, 9 } },
+ { EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
+ false, false, false,
+ { 36, 64, 100, 36, 64, 100 } },
+ { EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
+ false, false, true,
+ { 36, 60, 100 } },
+ { EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
+ false, false, false,
+ { 13, 13 } },
+ { EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
+ false, false, false,
+ { 140, 140 } },
+ { EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
+ false, false, true,
+ { 132, 44 } },
+};
+
/******************************************************************************
*
* EEPROM related functions
@@ -152,6 +224,19 @@
}
EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
+static void iwl_set_otp_access(struct iwl_priv *priv, enum iwl_access_mode mode)
+{
+ u32 otpgp;
+
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (mode == IWL_OTP_ACCESS_ABSOLUTE)
+ iwl_clear_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+ else
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+}
+
static int iwlcore_get_nvm_type(struct iwl_priv *priv)
{
u32 otpgp;
@@ -159,6 +244,9 @@
/* OTP only valid for CP/PP and after */
switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_NONE:
+ IWL_ERR(priv, "Unknown hardware type\n");
+ return -ENOENT;
case CSR_HW_REV_TYPE_3945:
case CSR_HW_REV_TYPE_4965:
case CSR_HW_REV_TYPE_5300:
@@ -249,6 +337,124 @@
return ret;
}
+static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data)
+{
+ int ret = 0;
+ u32 r;
+ u32 otpgp;
+
+ _iwl_write32(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+ ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+ return ret;
+ }
+ r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+ /* check for ECC errors: */
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
+ /* stop in this case */
+ /* set the uncorrectable OTP ECC bit for acknowledgement */
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+ IWL_ERR(priv, "Uncorrectable OTP ECC error, abort OTP read\n");
+ return -EINVAL;
+ }
+ if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
+ /* continue in this case */
+ /* set the correctable OTP ECC bit for acknowledgement */
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
+ IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
+ }
+ *eeprom_data = le16_to_cpu((__force __le16)(r >> 16));
+ return 0;
+}
+
+/*
+ * iwl_is_otp_empty: check for empty OTP
+ */
+static bool iwl_is_otp_empty(struct iwl_priv *priv)
+{
+ u16 next_link_addr = 0, link_value;
+ bool is_empty = false;
+
+ /* locate the beginning of OTP link list */
+ if (!iwl_read_otp_word(priv, next_link_addr, &link_value)) {
+ if (!link_value) {
+ IWL_ERR(priv, "OTP is empty\n");
+ is_empty = true;
+ }
+ } else {
+ IWL_ERR(priv, "Unable to read first block of OTP list.\n");
+ is_empty = true;
+ }
+
+ return is_empty;
+}
+
+
+/*
+ * iwl_find_otp_image: find EEPROM image in OTP
+ * finding the OTP block that contains the EEPROM image.
+ * the last valid block on the link list (the block _before_ the last block)
+ * is the block we should read and used to configure the device.
+ * If all the available OTP blocks are full, the last block will be the block
+ * we should read and used to configure the device.
+ * only perform this operation if shadow RAM is disabled
+ */
+static int iwl_find_otp_image(struct iwl_priv *priv,
+ u16 *validblockaddr)
+{
+ u16 next_link_addr = 0, link_value = 0, valid_addr;
+ int ret = 0;
+ int usedblocks = 0;
+
+ /* set addressing mode to absolute to traverse the link list */
+ iwl_set_otp_access(priv, IWL_OTP_ACCESS_ABSOLUTE);
+
+ /* checking for empty OTP or error */
+ if (iwl_is_otp_empty(priv))
+ return -EINVAL;
+
+ /*
+ * start traverse link list
+ * until reach the max number of OTP blocks
+ * different devices have different number of OTP blocks
+ */
+ do {
+ /* save current valid block address
+ * check for more block on the link list
+ */
+ valid_addr = next_link_addr;
+ next_link_addr = link_value;
+ IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
+ usedblocks, next_link_addr);
+ if (iwl_read_otp_word(priv, next_link_addr, &link_value))
+ return -EINVAL;
+ if (!link_value) {
+ /*
+ * reach the end of link list,
+ * set address point to the starting address
+ * of the image
+ */
+ goto done;
+ }
+ /* more in the link list, continue */
+ usedblocks++;
+ } while (usedblocks < priv->cfg->max_ll_items);
+ /* OTP full, use last block */
+ IWL_DEBUG_INFO(priv, "OTP is full, use last block\n");
+done:
+ *validblockaddr = valid_addr;
+ /* skip first 2 bytes (link list pointer) */
+ *validblockaddr += 2;
+ return ret;
+}
+
/**
* iwl_eeprom_init - read EEPROM contents
*
@@ -263,14 +469,14 @@
int sz;
int ret;
u16 addr;
- u32 otpgp;
+ u16 validblockaddr = 0;
+ u16 cache_addr = 0;
priv->nvm_device_type = iwlcore_get_nvm_type(priv);
-
+ if (priv->nvm_device_type == -ENOENT)
+ return -ENOENT;
/* allocate eeprom */
- if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
- priv->cfg->eeprom_size =
- OTP_BLOCK_SIZE * OTP_LOWER_BLOCKS_TOTAL;
+ IWL_DEBUG_INFO(priv, "NVM size = %d\n", priv->cfg->eeprom_size);
sz = priv->cfg->eeprom_size;
priv->eeprom = kzalloc(sz, GFP_KERNEL);
if (!priv->eeprom) {
@@ -298,46 +504,31 @@
if (ret) {
IWL_ERR(priv, "Failed to initialize OTP access.\n");
ret = -ENOENT;
- goto err;
+ goto done;
}
_iwl_write32(priv, CSR_EEPROM_GP,
iwl_read32(priv, CSR_EEPROM_GP) &
~CSR_EEPROM_GP_IF_OWNER_MSK);
- /* clear */
- _iwl_write32(priv, CSR_OTP_GP_REG,
- iwl_read32(priv, CSR_OTP_GP_REG) |
+
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
-
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- u32 r;
-
- _iwl_write32(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
- ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+ /* traversing the linked list if no shadow ram supported */
+ if (!priv->cfg->shadow_ram_support) {
+ if (iwl_find_otp_image(priv, &validblockaddr)) {
+ ret = -ENOENT;
goto done;
}
- r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
- /* check for ECC errors: */
- otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
- if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
- /* stop in this case */
- IWL_ERR(priv, "Uncorrectable OTP ECC error, Abort OTP read\n");
+ }
+ for (addr = validblockaddr; addr < validblockaddr + sz;
+ addr += sizeof(u16)) {
+ u16 eeprom_data;
+
+ ret = iwl_read_otp_word(priv, addr, &eeprom_data);
+ if (ret)
goto done;
- }
- if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
- /* continue in this case */
- _iwl_write32(priv, CSR_OTP_GP_REG,
- iwl_read32(priv, CSR_OTP_GP_REG) |
- CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
- IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
- }
- e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
+ e[cache_addr / 2] = eeprom_data;
+ cache_addr += sizeof(u16);
}
} else {
/* eeprom is an array of 16bit values */
@@ -458,13 +649,13 @@
iwl_eeprom_query_addr(priv, offset);
*eeprom_ch_index = iwl_eeprom_band_5;
break;
- case 6: /* 2.4GHz FAT channels */
+ case 6: /* 2.4GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
*eeprom_ch_info = (struct iwl_eeprom_channel *)
iwl_eeprom_query_addr(priv, offset);
*eeprom_ch_index = iwl_eeprom_band_6;
break;
- case 7: /* 5 GHz FAT channels */
+ case 7: /* 5 GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
*eeprom_ch_info = (struct iwl_eeprom_channel *)
iwl_eeprom_query_addr(priv, offset);
@@ -480,14 +671,14 @@
? # x " " : "")
/**
- * iwl_set_fat_chan_info - Copy fat channel info into driver's priv.
+ * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv.
*
* Does not set up a command, or touch hardware.
*/
-static int iwl_set_fat_chan_info(struct iwl_priv *priv,
+static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
enum ieee80211_band band, u16 channel,
const struct iwl_eeprom_channel *eeprom_ch,
- u8 fat_extension_channel)
+ u8 clear_ht40_extension_channel)
{
struct iwl_channel_info *ch_info;
@@ -497,7 +688,7 @@
if (!is_channel_valid(ch_info))
return -1;
- IWL_DEBUG_INFO(priv, "FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+ IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
@@ -513,17 +704,189 @@
&& !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
"" : "not ");
- ch_info->fat_eeprom = *eeprom_ch;
- ch_info->fat_max_power_avg = eeprom_ch->max_power_avg;
- ch_info->fat_curr_txpow = eeprom_ch->max_power_avg;
- ch_info->fat_min_power = 0;
- ch_info->fat_scan_power = eeprom_ch->max_power_avg;
- ch_info->fat_flags = eeprom_ch->flags;
- ch_info->fat_extension_channel = fat_extension_channel;
+ ch_info->ht40_eeprom = *eeprom_ch;
+ ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
+ ch_info->ht40_curr_txpow = eeprom_ch->max_power_avg;
+ ch_info->ht40_min_power = 0;
+ ch_info->ht40_scan_power = eeprom_ch->max_power_avg;
+ ch_info->ht40_flags = eeprom_ch->flags;
+ ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
return 0;
}
+/**
+ * iwl_get_max_txpower_avg - get the highest tx power from all chains.
+ * find the highest tx power from all chains for the channel
+ */
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, int element)
+{
+ s8 max_txpower_avg = 0; /* (dBm) */
+
+ IWL_DEBUG_INFO(priv, "%d - "
+ "chain_a: %d dB chain_b: %d dB "
+ "chain_c: %d dB mimo2: %d dB mimo3: %d dB\n",
+ element,
+ enhanced_txpower[element].chain_a_max >> 1,
+ enhanced_txpower[element].chain_b_max >> 1,
+ enhanced_txpower[element].chain_c_max >> 1,
+ enhanced_txpower[element].mimo2_max >> 1,
+ enhanced_txpower[element].mimo3_max >> 1);
+ /* Take the highest tx power from any valid chains */
+ if ((priv->cfg->valid_tx_ant & ANT_A) &&
+ (enhanced_txpower[element].chain_a_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].chain_a_max;
+ if ((priv->cfg->valid_tx_ant & ANT_B) &&
+ (enhanced_txpower[element].chain_b_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].chain_b_max;
+ if ((priv->cfg->valid_tx_ant & ANT_C) &&
+ (enhanced_txpower[element].chain_c_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].chain_c_max;
+ if (((priv->cfg->valid_tx_ant == ANT_AB) |
+ (priv->cfg->valid_tx_ant == ANT_BC) |
+ (priv->cfg->valid_tx_ant == ANT_AC)) &&
+ (enhanced_txpower[element].mimo2_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].mimo2_max;
+ if ((priv->cfg->valid_tx_ant == ANT_ABC) &&
+ (enhanced_txpower[element].mimo3_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].mimo3_max;
+
+ /* max. tx power in EEPROM is in 1/2 dBm format
+ * convert from 1/2 dBm to dBm
+ */
+ return max_txpower_avg >> 1;
+}
+
+/**
+ * iwl_update_common_txpower: update channel tx power
+ * update tx power per band based on EEPROM enhanced tx power info.
+ */
+static s8 iwl_update_common_txpower(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
+ int section, int element)
+{
+ struct iwl_channel_info *ch_info;
+ int ch;
+ bool is_ht40 = false;
+ s8 max_txpower_avg; /* (dBm) */
+
+ /* it is common section, contain all type (Legacy, HT and HT40)
+ * based on the element in the section to determine
+ * is it HT 40 or not
+ */
+ if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
+ is_ht40 = true;
+ max_txpower_avg =
+ iwl_get_max_txpower_avg(priv, enhanced_txpower, element);
+ ch_info = priv->channel_info;
+
+ for (ch = 0; ch < priv->channel_count; ch++) {
+ /* find matching band and update tx power if needed */
+ if ((ch_info->band == enhinfo[section].band) &&
+ (ch_info->max_power_avg < max_txpower_avg) && (!is_ht40)) {
+ /* Update regulatory-based run-time data */
+ ch_info->max_power_avg = ch_info->curr_txpow =
+ max_txpower_avg;
+ ch_info->scan_power = max_txpower_avg;
+ }
+ if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
+ ch_info->ht40_max_power_avg &&
+ (ch_info->ht40_max_power_avg < max_txpower_avg)) {
+ /* Update regulatory-based run-time data */
+ ch_info->ht40_max_power_avg = max_txpower_avg;
+ ch_info->ht40_curr_txpow = max_txpower_avg;
+ ch_info->ht40_scan_power = max_txpower_avg;
+ }
+ ch_info++;
+ }
+ return max_txpower_avg;
+}
+
+/**
+ * iwl_update_channel_txpower: update channel tx power
+ * update channel tx power based on EEPROM enhanced tx power info.
+ */
+static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
+ int section, int element)
+{
+ struct iwl_channel_info *ch_info;
+ int ch;
+ u8 channel;
+ s8 max_txpower_avg; /* (dBm) */
+
+ channel = enhinfo[section].iwl_eeprom_section_channel[element];
+ max_txpower_avg =
+ iwl_get_max_txpower_avg(priv, enhanced_txpower, element);
+
+ ch_info = priv->channel_info;
+ for (ch = 0; ch < priv->channel_count; ch++) {
+ /* find matching channel and update tx power if needed */
+ if (ch_info->channel == channel) {
+ if ((ch_info->max_power_avg < max_txpower_avg) &&
+ (!enhinfo[section].is_ht40)) {
+ /* Update regulatory-based run-time data */
+ ch_info->max_power_avg = max_txpower_avg;
+ ch_info->curr_txpow = max_txpower_avg;
+ ch_info->scan_power = max_txpower_avg;
+ }
+ if ((enhinfo[section].is_ht40) &&
+ (ch_info->ht40_max_power_avg) &&
+ (ch_info->ht40_max_power_avg < max_txpower_avg)) {
+ /* Update regulatory-based run-time data */
+ ch_info->ht40_max_power_avg = max_txpower_avg;
+ ch_info->ht40_curr_txpow = max_txpower_avg;
+ ch_info->ht40_scan_power = max_txpower_avg;
+ }
+ break;
+ }
+ ch_info++;
+ }
+ return max_txpower_avg;
+}
+
+/**
+ * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
+ */
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
+{
+ int eeprom_section_count = 0;
+ int section, element;
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
+ u32 offset;
+ s8 max_txpower_avg; /* (dBm) */
+
+ /* Loop through all the sections
+ * adjust bands and channel's max tx power
+ * Set the tx_power_user_lmt to the highest power
+ * supported by any channels and chains
+ */
+ for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
+ eeprom_section_count = enhinfo[section].count;
+ offset = enhinfo[section].offset;
+ enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
+ iwl_eeprom_query_addr(priv, offset);
+
+ for (element = 0; element < eeprom_section_count; element++) {
+ if (enhinfo[section].is_common)
+ max_txpower_avg =
+ iwl_update_common_txpower(priv,
+ enhanced_txpower, section, element);
+ else
+ max_txpower_avg =
+ iwl_update_channel_txpower(priv,
+ enhanced_txpower, section, element);
+
+ /* Update the tx_power_user_lmt to the highest power
+ * supported by any channel */
+ if (max_txpower_avg > priv->tx_power_user_lmt)
+ priv->tx_power_user_lmt = max_txpower_avg;
+ }
+ }
+}
+EXPORT_SYMBOL(iwlcore_eeprom_enhanced_txpower);
+
#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
? # x " " : "")
@@ -585,11 +948,10 @@
/* Copy the run-time flags so they are there even on
* invalid channels */
ch_info->flags = eeprom_ch_info[ch].flags;
- /* First write that fat is not enabled, and then enable
+ /* First write that ht40 is not enabled, and then enable
* one by one */
- ch_info->fat_extension_channel =
- (IEEE80211_CHAN_NO_HT40PLUS |
- IEEE80211_CHAN_NO_HT40MINUS);
+ ch_info->ht40_extension_channel =
+ IEEE80211_CHAN_NO_HT40;
if (!(is_channel_valid(ch_info))) {
IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
@@ -638,17 +1000,16 @@
}
}
- /* Check if we do have FAT channels */
+ /* Check if we do have HT40 channels */
if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
- EEPROM_REGULATORY_BAND_NO_FAT &&
+ EEPROM_REGULATORY_BAND_NO_HT40 &&
priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
- EEPROM_REGULATORY_BAND_NO_FAT)
+ EEPROM_REGULATORY_BAND_NO_HT40)
return 0;
- /* Two additional EEPROM bands for 2.4 and 5 GHz FAT channels */
+ /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
for (band = 6; band <= 7; band++) {
enum ieee80211_band ieeeband;
- u8 fat_extension_chan;
iwl_init_band_reference(priv, band, &eeprom_ch_count,
&eeprom_ch_info, &eeprom_ch_index);
@@ -659,31 +1020,28 @@
/* Loop through each band adding each of the channels */
for (ch = 0; ch < eeprom_ch_count; ch++) {
-
- if ((band == 6) &&
- ((eeprom_ch_index[ch] == 5) ||
- (eeprom_ch_index[ch] == 6) ||
- (eeprom_ch_index[ch] == 7)))
- /* both are allowed: above and below */
- fat_extension_chan = 0;
- else
- fat_extension_chan =
- IEEE80211_CHAN_NO_HT40MINUS;
-
/* Set up driver's info for lower half */
- iwl_set_fat_chan_info(priv, ieeeband,
+ iwl_mod_ht40_chan_info(priv, ieeeband,
eeprom_ch_index[ch],
- &(eeprom_ch_info[ch]),
- fat_extension_chan);
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40PLUS);
/* Set up driver's info for upper half */
- iwl_set_fat_chan_info(priv, ieeeband,
- (eeprom_ch_index[ch] + 4),
- &(eeprom_ch_info[ch]),
- IEEE80211_CHAN_NO_HT40PLUS);
+ iwl_mod_ht40_chan_info(priv, ieeeband,
+ eeprom_ch_index[ch] + 4,
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40MINUS);
}
}
+ /* for newer device (6000 series and up)
+ * EEPROM contain enhanced tx power information
+ * driver need to process addition information
+ * to determine the max channel tx power limits
+ */
+ if (priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower)
+ priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower(priv);
+
return 0;
}
EXPORT_SYMBOL(iwl_init_channel_map);
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 195b4ef..6b68db7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -88,10 +88,10 @@
* requirement for establishing a new network for legal operation on channels
* requiring RADAR detection or restricting ACTIVE scanning.
*
- * NOTE: "WIDE" flag does not indicate anything about "FAT" 40 MHz channels.
- * It only indicates that 20 MHz channel use is supported; FAT channel
+ * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels.
+ * It only indicates that 20 MHz channel use is supported; HT40 channel
* usage is indicated by a separate set of regulatory flags for each
- * FAT channel pair.
+ * HT40 channel pair.
*
* NOTE: Using a channel inappropriately will result in a uCode error!
*/
@@ -112,12 +112,36 @@
#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
/* *regulatory* channel data format in eeprom, one for each channel.
- * There are separate entries for FAT (40 MHz) vs. normal (20 MHz) channels. */
+ * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
struct iwl_eeprom_channel {
u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */
s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
} __attribute__ ((packed));
+/**
+ * iwl_eeprom_enhanced_txpwr structure
+ * This structure presents the enhanced regulatory tx power limit layout
+ * in eeprom image
+ * Enhanced regulatory tx power portion of eeprom image can be broken down
+ * into individual structures; each one is 8 bytes in size and contain the
+ * following information
+ * @chain_a_max_pwr: chain a max power in 1/2 dBm
+ * @chain_b_max_pwr: chain b max power in 1/2 dBm
+ * @chain_c_max_pwr: chain c max power in 1/2 dBm
+ * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
+ * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
+ *
+ */
+struct iwl_eeprom_enhanced_txpwr {
+ u16 reserved;
+ s8 chain_a_max;
+ s8 chain_b_max;
+ s8 chain_c_max;
+ s8 reserved1;
+ s8 mimo2_max;
+ s8 mimo3_max;
+} __attribute__ ((packed));
+
/* 3945 Specific */
#define EEPROM_3945_EEPROM_VERSION (0x2f)
@@ -170,18 +194,77 @@
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */
#define EEPROM_5000_REG_BAND_5_CHANNELS ((0x74)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */
-#define EEPROM_5000_REG_BAND_24_FAT_CHANNELS ((0x82)\
+#define EEPROM_5000_REG_BAND_24_HT40_CHANNELS ((0x82)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
-#define EEPROM_5000_REG_BAND_52_FAT_CHANNELS ((0x92)\
+#define EEPROM_5000_REG_BAND_52_HT40_CHANNELS ((0x92)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */
+/* 6000 and up regulatory tx power - indirect access */
+/* max. elements per section */
+#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8)
+#define EEPROM_TXPOWER_COMMON_HT40_INDEX (2)
+
+/**
+ * Partition the enhanced tx power portion of eeprom image into
+ * 10 sections based on band, modulation, frequency and channel
+ *
+ * Section 1: all CCK channels
+ * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
+ * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
+ * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
+ * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
+ * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
+ * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
+ * Section 8: 2.4 GHz channel 13, Both Legacy and HT
+ * Section 9: 2.4 GHz channel 140, Both Legacy and HT
+ * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
+ */
+/* 2.4 GHz band: CCK */
+#define EEPROM_LB_CCK_20_COMMON ((0xAA)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */
+/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
+#define EEPROM_LB_OFDM_COMMON ((0xB2)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
+/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
+#define EEPROM_HB_OFDM_COMMON ((0xCA)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
+/* 2.4GHz band channels:
+ * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
+#define EEPROM_LB_OFDM_20_BAND ((0xE2)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */
+/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
+#define EEPROM_LB_OFDM_HT40_BAND ((0x122)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */
+/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
+#define EEPROM_HB_OFDM_20_BAND ((0x14A)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */
+/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
+#define EEPROM_HB_OFDM_HT40_BAND ((0x17A)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
+/* 2.4 GHz band, channnel 13: Legacy, HT */
+#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x192)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
+/* 5.2 GHz band, channnel 140: Legacy, HT */
+#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A2)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
+/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
+#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B2)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
+
+
/* 5050 Specific */
#define EEPROM_5050_TX_POWER_VERSION (4)
#define EEPROM_5050_EEPROM_VERSION (0x21E)
/* OTP */
-#define OTP_LOWER_BLOCKS_TOTAL (3)
-#define OTP_BLOCK_SIZE (0x400)
+/* lower blocks contain EEPROM image and calibration data */
+#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */
+/* high blocks contain PAPD data */
+#define OTP_HIGH_IMAGE_SIZE_6x00 (6 * 512 * sizeof(u16)) /* 6 KB */
+#define OTP_HIGH_IMAGE_SIZE_1000 (0x200 * sizeof(u16)) /* 1024 bytes */
+#define OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */
+#define OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */
+#define OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */
/* 2.4 GHz */
extern const u8 iwl_eeprom_band_1[14];
@@ -313,7 +396,7 @@
* in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
* txpower (MSB).
*
- * Entries immediately below are for 20 MHz channel width. FAT (40 MHz)
+ * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
* channels (only for 4965, not supported by 3945) appear later in the EEPROM.
*
* 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
@@ -352,29 +435,29 @@
#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
/*
- * 2.4 GHz FAT channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
+ * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
*
* The channel listed is the center of the lower 20 MHz half of the channel.
* The overall center frequency is actually 2 channels (10 MHz) above that,
- * and the upper half of each FAT channel is centered 4 channels (20 MHz) away
- * from the lower half; e.g. the upper half of FAT channel 1 is channel 5,
- * and the overall FAT channel width centers on channel 3.
+ * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away
+ * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5,
+ * and the overall HT40 channel width centers on channel 3.
*
* NOTE: The RXON command uses 20 MHz channel numbers to specify the
* control channel to which to tune. RXON also specifies whether the
- * control channel is the upper or lower half of a FAT channel.
+ * control channel is the upper or lower half of a HT40 channel.
*
- * NOTE: 4965 does not support FAT channels on 2.4 GHz.
+ * NOTE: 4965 does not support HT40 channels on 2.4 GHz.
*/
-#define EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS (2*0xA0) /* 14 bytes */
+#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */
/*
- * 5.2 GHz FAT channels 36 (40), 44 (48), 52 (56), 60 (64),
+ * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64),
* 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
*/
-#define EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS (2*0xA8) /* 22 bytes */
+#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */
-#define EEPROM_REGULATORY_BAND_NO_FAT (0)
+#define EEPROM_REGULATORY_BAND_NO_HT40 (0)
struct iwl_eeprom_ops {
const u32 regulatory_bands[7];
@@ -383,6 +466,7 @@
void (*release_semaphore) (struct iwl_priv *priv);
u16 (*calib_version) (struct iwl_priv *priv);
const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset);
+ void (*update_enhanced_txpower) (struct iwl_priv *priv);
};
@@ -397,7 +481,7 @@
int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv);
void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv);
const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
-
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv);
int iwl_init_channel_map(struct iwl_priv *priv);
void iwl_free_channel_map(struct iwl_priv *priv);
const struct iwl_channel_info *iwl_get_channel_info(
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 17d61ac..532c8d6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -36,8 +36,6 @@
#include "iwl-core.h"
-#define IWL_CMD(x) case x: return #x
-
const char *get_cmd_string(u8 cmd)
{
switch (cmd) {
@@ -103,22 +101,23 @@
#define HOST_COMPLETE_TIMEOUT (HZ / 2)
-static int iwl_generic_cmd_callback(struct iwl_priv *priv,
- struct iwl_cmd *cmd, struct sk_buff *skb)
+static void iwl_generic_cmd_callback(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb)
{
struct iwl_rx_packet *pkt = NULL;
if (!skb) {
IWL_ERR(priv, "Error: Response NULL in %s.\n",
get_cmd_string(cmd->hdr.cmd));
- return 1;
+ return;
}
pkt = (struct iwl_rx_packet *)skb->data;
if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from %s (0x%08X)\n",
get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
- return 1;
+ return;
}
#ifdef CONFIG_IWLWIFI_DEBUG
@@ -127,29 +126,26 @@
case SENSITIVITY_CMD:
IWL_DEBUG_HC_DUMP(priv, "back from %s (0x%08X)\n",
get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
- break;
+ break;
default:
IWL_DEBUG_HC(priv, "back from %s (0x%08X)\n",
get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
}
#endif
-
- /* Let iwl_tx_complete free the response skb */
- return 1;
}
static int iwl_send_cmd_async(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
{
int ret;
- BUG_ON(!(cmd->meta.flags & CMD_ASYNC));
+ BUG_ON(!(cmd->flags & CMD_ASYNC));
/* An asynchronous command can not expect an SKB to be set. */
- BUG_ON(cmd->meta.flags & CMD_WANT_SKB);
+ BUG_ON(cmd->flags & CMD_WANT_SKB);
/* Assign a generic callback if one is not provided */
- if (!cmd->meta.u.callback)
- cmd->meta.u.callback = iwl_generic_cmd_callback;
+ if (!cmd->callback)
+ cmd->callback = iwl_generic_cmd_callback;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return -EBUSY;
@@ -168,10 +164,10 @@
int cmd_idx;
int ret;
- BUG_ON(cmd->meta.flags & CMD_ASYNC);
+ BUG_ON(cmd->flags & CMD_ASYNC);
/* A synchronous command can not have a callback set. */
- BUG_ON(cmd->meta.u.callback != NULL);
+ BUG_ON(cmd->callback);
if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)) {
IWL_ERR(priv,
@@ -183,9 +179,6 @@
set_bit(STATUS_HCMD_ACTIVE, &priv->status);
- if (cmd->meta.flags & CMD_WANT_SKB)
- cmd->meta.source = &cmd->meta;
-
cmd_idx = iwl_enqueue_hcmd(priv, cmd);
if (cmd_idx < 0) {
ret = cmd_idx;
@@ -222,7 +215,7 @@
ret = -EIO;
goto fail;
}
- if ((cmd->meta.flags & CMD_WANT_SKB) && !cmd->meta.u.skb) {
+ if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_skb) {
IWL_ERR(priv, "Error: Response NULL in '%s'\n",
get_cmd_string(cmd->id));
ret = -EIO;
@@ -233,20 +226,20 @@
goto out;
cancel:
- if (cmd->meta.flags & CMD_WANT_SKB) {
- struct iwl_cmd *qcmd;
-
- /* Cancel the CMD_WANT_SKB flag for the cmd in the
+ if (cmd->flags & CMD_WANT_SKB) {
+ /*
+ * Cancel the CMD_WANT_SKB flag for the cmd in the
* TX cmd queue. Otherwise in case the cmd comes
* in later, it will possibly set an invalid
- * address (cmd->meta.source). */
- qcmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
- qcmd->meta.flags &= ~CMD_WANT_SKB;
+ * address (cmd->meta.source).
+ */
+ priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_idx].flags &=
+ ~CMD_WANT_SKB;
}
fail:
- if (cmd->meta.u.skb) {
- dev_kfree_skb_any(cmd->meta.u.skb);
- cmd->meta.u.skb = NULL;
+ if (cmd->reply_skb) {
+ dev_kfree_skb_any(cmd->reply_skb);
+ cmd->reply_skb = NULL;
}
out:
clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
@@ -256,7 +249,7 @@
int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
{
- if (cmd->meta.flags & CMD_ASYNC)
+ if (cmd->flags & CMD_ASYNC)
return iwl_send_cmd_async(priv, cmd);
return iwl_send_cmd_sync(priv, cmd);
@@ -277,9 +270,9 @@
int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
u8 id, u16 len, const void *data,
- int (*callback)(struct iwl_priv *priv,
- struct iwl_cmd *cmd,
- struct sk_buff *skb))
+ void (*callback)(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb))
{
struct iwl_host_cmd cmd = {
.id = id,
@@ -287,8 +280,8 @@
.data = data,
};
- cmd.meta.flags |= CMD_ASYNC;
- cmd.meta.u.callback = callback;
+ cmd.flags |= CMD_ASYNC;
+ cmd.callback = callback;
return iwl_send_cmd_async(priv, &cmd);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index a1328c3..bd0b12ef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -145,4 +145,25 @@
#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue
#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue
+static inline void iwl_disable_interrupts(struct iwl_priv *priv)
+{
+ clear_bit(STATUS_INT_ENABLED, &priv->status);
+
+ /* disable interrupts from uCode/NIC to host */
+ iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+ /* acknowledge/clear/reset any interrupts still pending
+ * from uCode or flow handler (Rx/Tx DMA) */
+ iwl_write32(priv, CSR_INT, 0xffffffff);
+ iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
+ IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
+}
+
+static inline void iwl_enable_interrupts(struct iwl_priv *priv)
+{
+ IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
+ set_bit(STATUS_INT_ENABLED, &priv->status);
+ iwl_write32(priv, CSR_INT_MASK, priv->inta_mask);
+}
+
#endif /* __iwl_helpers_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 5e64252..f420c99 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -54,7 +54,7 @@
static const struct {
- u16 tpt;
+ u16 tpt; /* Mb/s */
u8 on_time;
u8 off_time;
} blink_tbl[] =
@@ -91,8 +91,8 @@
.id = REPLY_LEDS_CMD,
.len = sizeof(struct iwl_led_cmd),
.data = led_cmd,
- .meta.flags = CMD_ASYNC,
- .meta.u.callback = NULL,
+ .flags = CMD_ASYNC,
+ .callback = NULL,
};
u32 reg;
@@ -104,7 +104,7 @@
}
/* Set led pattern command */
-static int iwl4965_led_pattern(struct iwl_priv *priv, int led_id,
+static int iwl_led_pattern(struct iwl_priv *priv, int led_id,
unsigned int idx)
{
struct iwl_led_cmd led_cmd = {
@@ -121,7 +121,7 @@
}
/* Set led register off */
-static int iwl4965_led_on_reg(struct iwl_priv *priv, int led_id)
+static int iwl_led_on_reg(struct iwl_priv *priv, int led_id)
{
IWL_DEBUG_LED(priv, "led on %d\n", led_id);
iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
@@ -130,7 +130,7 @@
#if 0
/* Set led on command */
-static int iwl4965_led_on(struct iwl_priv *priv, int led_id)
+static int iwl_led_on(struct iwl_priv *priv, int led_id)
{
struct iwl_led_cmd led_cmd = {
.id = led_id,
@@ -142,7 +142,7 @@
}
/* Set led off command */
-int iwl4965_led_off(struct iwl_priv *priv, int led_id)
+int iwl_led_off(struct iwl_priv *priv, int led_id)
{
struct iwl_led_cmd led_cmd = {
.id = led_id,
@@ -157,7 +157,7 @@
/* Set led register off */
-static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id)
+static int iwl_led_off_reg(struct iwl_priv *priv, int led_id)
{
IWL_DEBUG_LED(priv, "LED Reg off\n");
iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
@@ -171,7 +171,7 @@
{
IWL_DEBUG_LED(priv, "Associated\n");
priv->allow_blinking = 1;
- return iwl4965_led_on_reg(priv, led_id);
+ return iwl_led_on_reg(priv, led_id);
}
static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
{
@@ -264,13 +264,16 @@
/*
- * calculate blink rate according to last 2 sec Tx/Rx activities
+ * calculate blink rate according to last second Tx/Rx activities
*/
static int iwl_get_blink_rate(struct iwl_priv *priv)
{
int i;
- u64 current_tpt = priv->tx_stats[2].bytes;
- /* FIXME: + priv->rx_stats[2].bytes; */
+ /* count both tx and rx traffic to be able to
+ * handle traffic in either direction
+ */
+ u64 current_tpt = priv->tx_stats.data_bytes +
+ priv->rx_stats.data_bytes;
s64 tpt = current_tpt - priv->led_tpt;
if (tpt < 0) /* wraparound */
@@ -314,7 +317,7 @@
priv->last_blink_time = 0;
if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) {
priv->last_blink_rate = IWL_SOLID_BLINK_IDX;
- iwl4965_led_pattern(priv, IWL_LED_LINK,
+ iwl_led_pattern(priv, IWL_LED_LINK,
IWL_SOLID_BLINK_IDX);
}
return;
@@ -328,12 +331,11 @@
/* call only if blink rate change */
if (blink_idx != priv->last_blink_rate)
- iwl4965_led_pattern(priv, IWL_LED_LINK, blink_idx);
+ iwl_led_pattern(priv, IWL_LED_LINK, blink_idx);
priv->last_blink_time = jiffies;
priv->last_blink_rate = blink_idx;
}
-EXPORT_SYMBOL(iwl_leds_background);
/* Register all led handler */
int iwl_leds_register(struct iwl_priv *priv)
@@ -351,8 +353,8 @@
sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
wiphy_name(priv->hw->wiphy));
- priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg;
- priv->led[IWL_LED_TRG_RADIO].led_off = iwl4965_led_off_reg;
+ priv->led[IWL_LED_TRG_RADIO].led_on = iwl_led_on_reg;
+ priv->led[IWL_LED_TRG_RADIO].led_off = iwl_led_off_reg;
priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO],
@@ -386,7 +388,7 @@
priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated;
priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated;
- priv->led[IWL_LED_TRG_RX].led_pattern = iwl4965_led_pattern;
+ priv->led[IWL_LED_TRG_RX].led_pattern = iwl_led_pattern;
if (ret)
goto exit_fail;
@@ -401,7 +403,7 @@
priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated;
priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated;
- priv->led[IWL_LED_TRG_TX].led_pattern = iwl4965_led_pattern;
+ priv->led[IWL_LED_TRG_TX].led_pattern = iwl_led_pattern;
if (ret)
goto exit_fail;
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index f2ea3f0..4ec6a83 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -36,25 +36,41 @@
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
+#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
/*
- * Setting power level allow the card to go to sleep when not busy.
+ * Setting power level allows the card to go to sleep when not busy.
*
- * The power level is set to INDEX_1 (the least deep state) by
- * default, and will, in the future, be the deepest state unless
- * otherwise required by pm_qos network latency requirements.
- *
- * Using INDEX_1 without pm_qos is ok because mac80211 will disable
- * PS when even checking every beacon for the TIM bit would exceed
- * the required latency.
+ * We calculate a sleep command based on the required latency, which
+ * we get from mac80211. In order to handle thermal throttling, we can
+ * also use pre-defined power levels.
*/
-#define IWL_POWER_RANGE_0_MAX (2)
-#define IWL_POWER_RANGE_1_MAX (10)
+/*
+ * For now, keep using power level 1 instead of automatically
+ * adjusting ...
+ */
+bool no_sleep_autoadjust = true;
+module_param(no_sleep_autoadjust, bool, S_IRUGO);
+MODULE_PARM_DESC(no_sleep_autoadjust,
+ "don't automatically adjust sleep level "
+ "according to maximum network latency");
+/*
+ * This defines the old power levels. They are still used by default
+ * (level 1) and for thermal throttle (levels 3 through 5)
+ */
+
+struct iwl_power_vec_entry {
+ struct iwl_powertable_cmd cmd;
+ u8 no_dtim;
+};
+
+#define IWL_DTIM_RANGE_0_MAX 2
+#define IWL_DTIM_RANGE_1_MAX 10
#define NOSLP cpu_to_le16(0), 0, 0
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
@@ -66,9 +82,8 @@
cpu_to_le32(X3), \
cpu_to_le32(X4)}
/* default power management (not Tx power) table values */
-/* for DTIM period 0 through IWL_POWER_RANGE_0_MAX */
+/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
- {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
@@ -77,9 +92,8 @@
};
-/* for DTIM period IWL_POWER_RANGE_0_MAX + 1 through IWL_POWER_RANGE_1_MAX */
+/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
- {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
@@ -87,9 +101,8 @@
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
};
-/* for DTIM period > IWL_POWER_RANGE_1_MAX */
+/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
- {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
@@ -97,80 +110,29 @@
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
};
-
-/* set card power command */
-static int iwl_set_power(struct iwl_priv *priv, void *cmd)
+static void iwl_static_sleep_cmd(struct iwl_priv *priv,
+ struct iwl_powertable_cmd *cmd,
+ enum iwl_power_level lvl, int period)
{
- return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
- sizeof(struct iwl_powertable_cmd), cmd);
-}
-
-/* initialize to default */
-static void iwl_power_init_handle(struct iwl_priv *priv)
-{
- struct iwl_power_mgr *pow_data;
- int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_NUM;
- struct iwl_powertable_cmd *cmd;
- int i;
- u16 lctl;
-
- IWL_DEBUG_POWER(priv, "Initialize power \n");
-
- pow_data = &priv->power_data;
-
- memset(pow_data, 0, sizeof(*pow_data));
-
- memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
- memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
- memcpy(&pow_data->pwr_range_2[0], &range_2[0], size);
-
- lctl = iwl_pcie_link_ctl(priv);
-
- IWL_DEBUG_POWER(priv, "adjust power command flags\n");
-
- for (i = 0; i < IWL_POWER_NUM; i++) {
- cmd = &pow_data->pwr_range_0[i].cmd;
-
- if (lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
- cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
- else
- cmd->flags |= IWL_POWER_PCI_PM_MSK;
- }
-}
-
-/* adjust power command according to DTIM period and power level*/
-static int iwl_update_power_cmd(struct iwl_priv *priv,
- struct iwl_powertable_cmd *cmd, u16 mode)
-{
- struct iwl_power_vec_entry *range;
- struct iwl_power_mgr *pow_data;
- int i;
- u32 max_sleep = 0;
- u8 period;
+ const struct iwl_power_vec_entry *table;
+ int max_sleep, i;
bool skip;
- if (mode > IWL_POWER_INDEX_5) {
- IWL_DEBUG_POWER(priv, "Error invalid power mode \n");
- return -EINVAL;
- }
+ table = range_2;
+ if (period < IWL_DTIM_RANGE_1_MAX)
+ table = range_1;
+ if (period < IWL_DTIM_RANGE_0_MAX)
+ table = range_0;
- pow_data = &priv->power_data;
+ BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
- if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX)
- range = &pow_data->pwr_range_0[0];
- else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX)
- range = &pow_data->pwr_range_1[0];
- else
- range = &pow_data->pwr_range_2[0];
-
- period = pow_data->dtim_period;
- memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd));
+ *cmd = table[lvl].cmd;
if (period == 0) {
- period = 1;
skip = false;
+ period = 1;
} else {
- skip = !!range[mode].no_dtim;
+ skip = !!table[lvl].no_dtim;
}
if (skip) {
@@ -178,7 +140,7 @@
max_sleep = le32_to_cpu(slp_itrvl);
if (max_sleep == 0xFF)
max_sleep = period * (skip + 1);
- else if (max_sleep > period)
+ else if (max_sleep > period)
max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
} else {
@@ -190,6 +152,112 @@
if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
+ if (priv->power_data.pci_pm)
+ cmd->flags |= IWL_POWER_PCI_PM_MSK;
+ else
+ cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
+
+ IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
+}
+
+/* default Thermal Throttling transaction table
+ * Current state | Throttling Down | Throttling Up
+ *=============================================================================
+ * Condition Nxt State Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ * IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A
+ * IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0
+ * IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1
+ * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
+ *=============================================================================
+ */
+static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
+ {IWL_TI_1, 105, CT_KILL_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
+ {IWL_TI_2, 110, CT_KILL_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
+ {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+
+/* Advance Thermal Throttling default restriction table */
+static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
+ {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true },
+ {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true },
+ {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false },
+ {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false }
+};
+
+
+static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
+ struct iwl_powertable_cmd *cmd)
+{
+ memset(cmd, 0, sizeof(*cmd));
+
+ if (priv->power_data.pci_pm)
+ cmd->flags |= IWL_POWER_PCI_PM_MSK;
+
+ IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
+}
+
+static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
+ struct iwl_powertable_cmd *cmd,
+ int dynps_ms, int wakeup_period)
+{
+ /*
+ * These are the original power level 3 sleep successions. The
+ * device may behave better with such succession and was also
+ * only tested with that. Just like the original sleep commands,
+ * also adjust the succession here to the wakeup_period below.
+ * The ranges are the same as for the sleep commands, 0-2, 3-9
+ * and >10, which is selected based on the DTIM interval for
+ * the sleep index but here we use the wakeup period since that
+ * is what we need to do for the latency requirements.
+ */
+ static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 };
+ static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 };
+ static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF };
+ const u8 *slp_succ = slp_succ_r0;
+ int i;
+
+ if (wakeup_period > IWL_DTIM_RANGE_0_MAX)
+ slp_succ = slp_succ_r1;
+ if (wakeup_period > IWL_DTIM_RANGE_1_MAX)
+ slp_succ = slp_succ_r2;
+
+ memset(cmd, 0, sizeof(*cmd));
+
+ cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK |
+ IWL_POWER_FAST_PD; /* no use seeing frames for others */
+
+ if (priv->power_data.pci_pm)
+ cmd->flags |= IWL_POWER_PCI_PM_MSK;
+
+ cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
+ cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
+
+ for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+ cmd->sleep_interval[i] =
+ cpu_to_le32(min_t(int, slp_succ[i], wakeup_period));
+
+ IWL_DEBUG_POWER(priv, "Automatic sleep command\n");
+}
+
+static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
+{
+ IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
@@ -200,79 +268,587 @@
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
- return 0;
+ return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
+ sizeof(struct iwl_powertable_cmd), cmd);
}
-/*
- * compute the final power mode index
- */
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
- struct iwl_power_mgr *setting = &(priv->power_data);
int ret = 0;
- u16 uninitialized_var(final_mode);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ bool enabled = (priv->iw_mode == NL80211_IFTYPE_STATION) &&
+ (priv->hw->conf.flags & IEEE80211_CONF_PS);
bool update_chains;
+ struct iwl_powertable_cmd cmd;
+ int dtimper;
/* Don't update the RX chain when chain noise calibration is running */
update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
- final_mode = priv->power_data.user_power_setting;
+ if (priv->vif)
+ dtimper = priv->vif->bss_conf.dtim_period;
+ else
+ dtimper = 1;
- if (setting->power_disabled)
- final_mode = IWL_POWER_MODE_CAM;
+ /* TT power setting overwrites everything */
+ if (tt->state >= IWL_TI_1)
+ iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
+ else if (!enabled)
+ iwl_power_sleep_cam_cmd(priv, &cmd);
+ else if (priv->power_data.debug_sleep_level_override >= 0)
+ iwl_static_sleep_cmd(priv, &cmd,
+ priv->power_data.debug_sleep_level_override,
+ dtimper);
+ else if (no_sleep_autoadjust)
+ iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper);
+ else
+ iwl_power_fill_sleep_cmd(priv, &cmd,
+ priv->hw->conf.dynamic_ps_timeout,
+ priv->hw->conf.max_sleep_period);
if (iwl_is_ready_rf(priv) &&
- ((setting->power_mode != final_mode) || force)) {
- struct iwl_powertable_cmd cmd;
-
- if (final_mode != IWL_POWER_MODE_CAM)
+ (memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) {
+ if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
set_bit(STATUS_POWER_PMI, &priv->status);
- iwl_update_power_cmd(priv, &cmd, final_mode);
- cmd.keep_alive_beacons = 0;
-
- if (final_mode == IWL_POWER_INDEX_5)
- cmd.flags |= IWL_POWER_FAST_PD;
-
ret = iwl_set_power(priv, &cmd);
+ if (!ret) {
+ if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+ clear_bit(STATUS_POWER_PMI, &priv->status);
- if (final_mode == IWL_POWER_MODE_CAM)
- clear_bit(STATUS_POWER_PMI, &priv->status);
-
- if (priv->cfg->ops->lib->update_chain_flags && update_chains)
- priv->cfg->ops->lib->update_chain_flags(priv);
- else
- IWL_DEBUG_POWER(priv, "Cannot update the power, chain noise "
+ if (priv->cfg->ops->lib->update_chain_flags &&
+ update_chains)
+ priv->cfg->ops->lib->update_chain_flags(priv);
+ else if (priv->cfg->ops->lib->update_chain_flags)
+ IWL_DEBUG_POWER(priv,
+ "Cannot update the power, chain noise "
"calibration running: %d\n",
priv->chain_noise_data.state);
- if (!ret)
- setting->power_mode = final_mode;
+ memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd));
+ } else
+ IWL_ERR(priv, "set power fail, ret = %d", ret);
}
return ret;
}
EXPORT_SYMBOL(iwl_power_update_mode);
-/* set user_power_setting */
-int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
+bool iwl_ht_enabled(struct iwl_priv *priv)
{
- if (mode >= IWL_POWER_NUM)
- return -EINVAL;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
- priv->power_data.user_power_setting = mode;
-
- return iwl_power_update_mode(priv, 0);
+ if (!priv->thermal_throttle.advanced_tt)
+ return true;
+ restriction = tt->restriction + tt->state;
+ return restriction->is_ht;
}
-EXPORT_SYMBOL(iwl_power_set_user_mode);
+EXPORT_SYMBOL(iwl_ht_enabled);
+
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return IWL_ANT_OK_MULTI;
+ restriction = tt->restriction + tt->state;
+ return restriction->tx_stream;
+}
+EXPORT_SYMBOL(iwl_tx_ant_restriction);
+
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return IWL_ANT_OK_MULTI;
+ restriction = tt->restriction + tt->state;
+ return restriction->rx_stream;
+}
+
+#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */
+
+/*
+ * toggle the bit to wake up uCode and check the temperature
+ * if the temperature is below CT, uCode will stay awake and send card
+ * state notification with CT_KILL bit clear to inform Thermal Throttling
+ * Management to change state. Otherwise, uCode will go back to sleep
+ * without doing anything, driver should continue the 5 seconds timer
+ * to wake up uCode for temperature check until temperature drop below CT
+ */
+static void iwl_tt_check_exit_ct_kill(unsigned long data)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)data;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ unsigned long flags;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (tt->state == IWL_TI_CT_KILL) {
+ if (priv->thermal_throttle.ct_kill_toggle) {
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ priv->thermal_throttle.ct_kill_toggle = false;
+ } else {
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ priv->thermal_throttle.ct_kill_toggle = true;
+ }
+ iwl_read32(priv, CSR_UCODE_DRV_GP1);
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ if (!iwl_grab_nic_access(priv))
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+
+ /* Reschedule the ct_kill timer to occur in
+ * CT_KILL_EXIT_DURATION seconds to ensure we get a
+ * thermal update */
+ mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
+ CT_KILL_EXIT_DURATION * HZ);
+ }
+}
+
+static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
+ bool stop)
+{
+ if (stop) {
+ IWL_DEBUG_POWER(priv, "Stop all queues\n");
+ if (priv->mac80211_registered)
+ ieee80211_stop_queues(priv->hw);
+ IWL_DEBUG_POWER(priv,
+ "Schedule 5 seconds CT_KILL Timer\n");
+ mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
+ CT_KILL_EXIT_DURATION * HZ);
+ } else {
+ IWL_DEBUG_POWER(priv, "Wake all queues\n");
+ if (priv->mac80211_registered)
+ ieee80211_wake_queues(priv->hw);
+ }
+}
+
+#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90)
+
+/*
+ * Legacy thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ * Chip will identify dangerously high temperatures that can
+ * harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ * Throttle early enough to lower the power consumption before
+ * drastic steps are needed
+ */
+static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ enum iwl_tt_state old_state;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if ((tt->tt_previous_temp) &&
+ (temp > tt->tt_previous_temp) &&
+ ((temp - tt->tt_previous_temp) >
+ IWL_TT_INCREASE_MARGIN)) {
+ IWL_DEBUG_POWER(priv,
+ "Temperature increase %d degree Celsius\n",
+ (temp - tt->tt_previous_temp));
+ }
+#endif
+ old_state = tt->state;
+ /* in Celsius */
+ if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
+ tt->state = IWL_TI_CT_KILL;
+ else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
+ tt->state = IWL_TI_2;
+ else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
+ tt->state = IWL_TI_1;
+ else
+ tt->state = IWL_TI_0;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ tt->tt_previous_temp = temp;
+#endif
+ if (tt->state != old_state) {
+ switch (tt->state) {
+ case IWL_TI_0:
+ /*
+ * When the system is ready to go back to IWL_TI_0
+ * we only have to call iwl_power_update_mode() to
+ * do so.
+ */
+ break;
+ case IWL_TI_1:
+ tt->tt_power_mode = IWL_POWER_INDEX_3;
+ break;
+ case IWL_TI_2:
+ tt->tt_power_mode = IWL_POWER_INDEX_4;
+ break;
+ default:
+ tt->tt_power_mode = IWL_POWER_INDEX_5;
+ break;
+ }
+ mutex_lock(&priv->mutex);
+ if (iwl_power_update_mode(priv, true)) {
+ /* TT state not updated
+ * try again during next temperature read
+ */
+ tt->state = old_state;
+ IWL_ERR(priv, "Cannot update power mode, "
+ "TT state not updated\n");
+ } else {
+ if (tt->state == IWL_TI_CT_KILL)
+ iwl_perform_ct_kill_task(priv, true);
+ else if (old_state == IWL_TI_CT_KILL &&
+ tt->state != IWL_TI_CT_KILL)
+ iwl_perform_ct_kill_task(priv, false);
+ IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
+ tt->state);
+ IWL_DEBUG_POWER(priv, "Power Index change to %u\n",
+ tt->tt_power_mode);
+ }
+ mutex_unlock(&priv->mutex);
+ }
+}
+
+/*
+ * Advance thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ * Chip will identify dangerously high temperatures that can
+ * harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ * Throttle early enough to lower the power consumption before
+ * drastic steps are needed
+ * Actions include relaxing the power down sleep thresholds and
+ * decreasing the number of TX streams
+ * 3) Avoid throughput performance impact as much as possible
+ *
+ *=============================================================================
+ * Condition Nxt State Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ * IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A
+ * IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0
+ * IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1
+ * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
+ *=============================================================================
+ */
+static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ int i;
+ bool changed = false;
+ enum iwl_tt_state old_state;
+ struct iwl_tt_trans *transaction;
+
+ old_state = tt->state;
+ for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
+ /* based on the current TT state,
+ * find the curresponding transaction table
+ * each table has (IWL_TI_STATE_MAX - 1) entries
+ * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
+ * will advance to the correct table.
+ * then based on the current temperature
+ * find the next state need to transaction to
+ * go through all the possible (IWL_TI_STATE_MAX - 1) entries
+ * in the current table to see if transaction is needed
+ */
+ transaction = tt->transaction +
+ ((old_state * (IWL_TI_STATE_MAX - 1)) + i);
+ if (temp >= transaction->tt_low &&
+ temp <= transaction->tt_high) {
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if ((tt->tt_previous_temp) &&
+ (temp > tt->tt_previous_temp) &&
+ ((temp - tt->tt_previous_temp) >
+ IWL_TT_INCREASE_MARGIN)) {
+ IWL_DEBUG_POWER(priv,
+ "Temperature increase %d "
+ "degree Celsius\n",
+ (temp - tt->tt_previous_temp));
+ }
+ tt->tt_previous_temp = temp;
+#endif
+ if (old_state !=
+ transaction->next_state) {
+ changed = true;
+ tt->state =
+ transaction->next_state;
+ }
+ break;
+ }
+ }
+ if (changed) {
+ struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+ if (tt->state >= IWL_TI_1) {
+ /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
+ tt->tt_power_mode = IWL_POWER_INDEX_5;
+ if (!iwl_ht_enabled(priv))
+ /* disable HT */
+ rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+ RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
+ RXON_FLG_HT40_PROT_MSK |
+ RXON_FLG_HT_PROT_MSK);
+ else {
+ /* check HT capability and set
+ * according to the system HT capability
+ * in case get disabled before */
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+
+ } else {
+ /*
+ * restore system power setting -- it will be
+ * recalculated automatically.
+ */
+
+ /* check HT capability and set
+ * according to the system HT capability
+ * in case get disabled before */
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+ mutex_lock(&priv->mutex);
+ if (iwl_power_update_mode(priv, true)) {
+ /* TT state not updated
+ * try again during next temperature read
+ */
+ IWL_ERR(priv, "Cannot update power mode, "
+ "TT state not updated\n");
+ tt->state = old_state;
+ } else {
+ IWL_DEBUG_POWER(priv,
+ "Thermal Throttling to new state: %u\n",
+ tt->state);
+ if (old_state != IWL_TI_CT_KILL &&
+ tt->state == IWL_TI_CT_KILL) {
+ IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n");
+ iwl_perform_ct_kill_task(priv, true);
+
+ } else if (old_state == IWL_TI_CT_KILL &&
+ tt->state != IWL_TI_CT_KILL) {
+ IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
+ iwl_perform_ct_kill_task(priv, false);
+ }
+ }
+ mutex_unlock(&priv->mutex);
+ }
+}
+
+/* Card State Notification indicated reach critical temperature
+ * if PSP not enable, no Thermal Throttling function will be performed
+ * just set the GP1 bit to acknowledge the event
+ * otherwise, go into IWL_TI_CT_KILL state
+ * since Card State Notification will not provide any temperature reading
+ * for Legacy mode
+ * so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
+ * for advance mode
+ * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
+ */
+static void iwl_bg_ct_enter(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ if (tt->state != IWL_TI_CT_KILL) {
+ IWL_ERR(priv, "Device reached critical temperature "
+ "- ucode going to sleep!\n");
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv,
+ IWL_MINIMAL_POWER_THRESHOLD);
+ else
+ iwl_advance_tt_handler(priv,
+ CT_KILL_THRESHOLD + 1);
+ }
+}
+
+/* Card State Notification indicated out of critical temperature
+ * since Card State Notification will not provide any temperature reading
+ * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
+ * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
+ */
+static void iwl_bg_ct_exit(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ /* stop ct_kill_exit_tm timer */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+
+ if (tt->state == IWL_TI_CT_KILL) {
+ IWL_ERR(priv,
+ "Device temperature below critical"
+ "- ucode awake!\n");
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv,
+ IWL_REDUCED_PERFORMANCE_THRESHOLD_2);
+ else
+ iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD);
+ }
+}
+
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing critical temperature enter.\n");
+ queue_work(priv->workqueue, &priv->ct_enter);
+}
+EXPORT_SYMBOL(iwl_tt_enter_ct_kill);
+
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing critical temperature exit.\n");
+ queue_work(priv->workqueue, &priv->ct_exit);
+}
+EXPORT_SYMBOL(iwl_tt_exit_ct_kill);
+
+static void iwl_bg_tt_work(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work);
+ s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+ temp = KELVIN_TO_CELSIUS(priv->temperature);
+
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv, temp);
+ else
+ iwl_advance_tt_handler(priv, temp);
+}
+
+void iwl_tt_handler(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing thermal throttling work.\n");
+ queue_work(priv->workqueue, &priv->tt_work);
+}
+EXPORT_SYMBOL(iwl_tt_handler);
+
+/* Thermal throttling initialization
+ * For advance thermal throttling:
+ * Initialize Thermal Index and temperature threshold table
+ * Initialize thermal throttling restriction table
+ */
+void iwl_tt_initialize(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
+ struct iwl_tt_trans *transaction;
+
+ IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
+
+ memset(tt, 0, sizeof(struct iwl_tt_mgmt));
+
+ tt->state = IWL_TI_0;
+ init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
+ priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
+ priv->thermal_throttle.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill;
+
+ /* setup deferred ct kill work */
+ INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
+ INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
+ INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
+
+ switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_6x00:
+ case CSR_HW_REV_TYPE_6x50:
+ IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
+ tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
+ IWL_TI_STATE_MAX, GFP_KERNEL);
+ tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) *
+ IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1),
+ GFP_KERNEL);
+ if (!tt->restriction || !tt->transaction) {
+ IWL_ERR(priv, "Fallback to Legacy Throttling\n");
+ priv->thermal_throttle.advanced_tt = false;
+ kfree(tt->restriction);
+ tt->restriction = NULL;
+ kfree(tt->transaction);
+ tt->transaction = NULL;
+ } else {
+ transaction = tt->transaction +
+ (IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_0[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_1[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_2[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_3[0], size);
+ size = sizeof(struct iwl_tt_restriction) *
+ IWL_TI_STATE_MAX;
+ memcpy(tt->restriction,
+ &restriction_range[0], size);
+ priv->thermal_throttle.advanced_tt = true;
+ }
+ break;
+ default:
+ IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
+ priv->thermal_throttle.advanced_tt = false;
+ break;
+ }
+}
+EXPORT_SYMBOL(iwl_tt_initialize);
+
+/* cleanup thermal throttling management related memory and timer */
+void iwl_tt_exit(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ /* stop ct_kill_exit_tm timer if activated */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+ cancel_work_sync(&priv->tt_work);
+ cancel_work_sync(&priv->ct_enter);
+ cancel_work_sync(&priv->ct_exit);
+
+ if (priv->thermal_throttle.advanced_tt) {
+ /* free advance thermal throttling memory */
+ kfree(tt->restriction);
+ tt->restriction = NULL;
+ kfree(tt->transaction);
+ tt->transaction = NULL;
+ }
+}
+EXPORT_SYMBOL(iwl_tt_exit);
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
- iwl_power_init_handle(priv);
- priv->power_data.user_power_setting = IWL_POWER_INDEX_1;
- /* default to disabled until mac80211 says otherwise */
- priv->power_data.power_disabled = 1;
+ u16 lctl = iwl_pcie_link_ctl(priv);
+
+ priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
+
+ priv->power_data.debug_sleep_level_override = -1;
+
+ memset(&priv->power_data.sleep_cmd, 0,
+ sizeof(priv->power_data.sleep_cmd));
}
EXPORT_SYMBOL(iwl_power_initialize);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 37ba3bb..df6f6a4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -28,13 +28,91 @@
#ifndef __iwl_power_setting_h__
#define __iwl_power_setting_h__
-#include <net/mac80211.h>
#include "iwl-commands.h"
-struct iwl_priv;
+#define IWL_ABSOLUTE_ZERO 0
+#define IWL_ABSOLUTE_MAX 0xFFFFFFFF
+#define IWL_TT_INCREASE_MARGIN 5
-enum {
- IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */
+enum iwl_antenna_ok {
+ IWL_ANT_OK_NONE,
+ IWL_ANT_OK_SINGLE,
+ IWL_ANT_OK_MULTI,
+};
+
+/* Thermal Throttling State Machine states */
+enum iwl_tt_state {
+ IWL_TI_0, /* normal temperature, system power state */
+ IWL_TI_1, /* high temperature detect, low power state */
+ IWL_TI_2, /* higher temperature detected, lower power state */
+ IWL_TI_CT_KILL, /* critical temperature detected, lowest power state */
+ IWL_TI_STATE_MAX
+};
+
+/**
+ * struct iwl_tt_restriction - Thermal Throttling restriction table
+ * @tx_stream: number of tx stream allowed
+ * @is_ht: ht enable/disable
+ * @rx_stream: number of rx stream allowed
+ *
+ * This table is used by advance thermal throttling management
+ * based on the current thermal throttling state, and determines
+ * the number of tx/rx streams and the status of HT operation.
+ */
+struct iwl_tt_restriction {
+ enum iwl_antenna_ok tx_stream;
+ enum iwl_antenna_ok rx_stream;
+ bool is_ht;
+};
+
+/**
+ * struct iwl_tt_trans - Thermal Throttling transaction table
+ * @next_state: next thermal throttling mode
+ * @tt_low: low temperature threshold to change state
+ * @tt_high: high temperature threshold to change state
+ *
+ * This is used by the advanced thermal throttling algorithm
+ * to determine the next thermal state to go based on the
+ * current temperature.
+ */
+struct iwl_tt_trans {
+ enum iwl_tt_state next_state;
+ u32 tt_low;
+ u32 tt_high;
+};
+
+/**
+ * struct iwl_tt_mgnt - Thermal Throttling Management structure
+ * @advanced_tt: advanced thermal throttle required
+ * @state: current Thermal Throttling state
+ * @tt_power_mode: Thermal Throttling power mode index
+ * being used to set power level when
+ * when thermal throttling state != IWL_TI_0
+ * the tt_power_mode should set to different
+ * power mode based on the current tt state
+ * @tt_previous_temperature: last measured temperature
+ * @iwl_tt_restriction: ptr to restriction tbl, used by advance
+ * thermal throttling to determine how many tx/rx streams
+ * should be used in tt state; and can HT be enabled or not
+ * @iwl_tt_trans: ptr to adv trans table, used by advance thermal throttling
+ * state transaction
+ * @ct_kill_toggle: used to toggle the CSR bit when checking uCode temperature
+ * @ct_kill_exit_tm: timer to exit thermal kill
+ */
+struct iwl_tt_mgmt {
+ enum iwl_tt_state state;
+ bool advanced_tt;
+ u8 tt_power_mode;
+ bool ct_kill_toggle;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ s32 tt_previous_temp;
+#endif
+ struct iwl_tt_restriction *restriction;
+ struct iwl_tt_trans *transaction;
+ struct timer_list ct_kill_exit_tm;
+};
+
+enum iwl_power_level {
IWL_POWER_INDEX_1,
IWL_POWER_INDEX_2,
IWL_POWER_INDEX_3,
@@ -43,26 +121,23 @@
IWL_POWER_NUM
};
-/* Power management (not Tx power) structures */
-
-struct iwl_power_vec_entry {
- struct iwl_powertable_cmd cmd;
- u8 no_dtim;
-};
-
struct iwl_power_mgr {
- struct iwl_power_vec_entry pwr_range_0[IWL_POWER_NUM];
- struct iwl_power_vec_entry pwr_range_1[IWL_POWER_NUM];
- struct iwl_power_vec_entry pwr_range_2[IWL_POWER_NUM];
- u32 dtim_period;
- /* final power level that used to calculate final power command */
- u8 power_mode;
- u8 user_power_setting; /* set by user through sysfs */
- u8 power_disabled; /* set by mac80211's CONF_PS */
+ struct iwl_powertable_cmd sleep_cmd;
+ int debug_sleep_level_override;
+ bool pci_pm;
};
int iwl_power_update_mode(struct iwl_priv *priv, bool force);
-int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode);
+bool iwl_ht_enabled(struct iwl_priv *priv);
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv);
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv);
+void iwl_tt_handler(struct iwl_priv *priv);
+void iwl_tt_initialize(struct iwl_priv *priv);
+void iwl_tt_exit(struct iwl_priv *priv);
void iwl_power_initialize(struct iwl_priv *priv);
+extern bool no_sleep_autoadjust;
+
#endif /* __iwl_power_setting_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 3b9cac3..d393e8f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -80,6 +80,8 @@
#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
+#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
+#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)
#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
@@ -91,7 +93,8 @@
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
-
+#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
+#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 2b8d40b..8150c5c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -406,7 +406,6 @@
rxq->free_count = 0;
spin_unlock_irqrestore(&rxq->lock, flags);
}
-EXPORT_SYMBOL(iwl_rx_queue_reset);
int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
{
@@ -540,13 +539,14 @@
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
- (int)sizeof(priv->statistics), pkt->len);
+ (int)sizeof(priv->statistics),
+ le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
change = ((priv->statistics.general.temperature !=
pkt->u.stats.general.temperature) ||
((priv->statistics.flag &
- STATISTICS_REPLY_FLG_FAT_MODE_MSK) !=
- (pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)));
+ STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
+ (pkt->u.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
@@ -646,7 +646,7 @@
u32 tsf_low;
int rssi;
- if (likely(!(priv->debug_level & IWL_DL_RX)))
+ if (likely(!(iwl_get_debug_level(priv) & IWL_DL_RX)))
return;
/* MAC header */
@@ -746,14 +746,6 @@
}
#endif
-static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len)
-{
- /* 0 - mgmt, 1 - cnt, 2 - data */
- int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2;
- priv->rx_stats[idx].cnt++;
- priv->rx_stats[idx].bytes += len;
-}
-
/*
* returns non-zero if packet should be dropped
*/
@@ -862,61 +854,12 @@
}
static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
- int include_phy,
- struct iwl_rx_mem_buffer *rxb,
- struct ieee80211_rx_status *stats)
+ struct ieee80211_hdr *hdr,
+ u16 len,
+ u32 ampdu_status,
+ struct iwl_rx_mem_buffer *rxb,
+ struct ieee80211_rx_status *stats)
{
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- struct iwl_rx_phy_res *rx_start = (include_phy) ?
- (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
- struct ieee80211_hdr *hdr;
- u16 len;
- __le32 *rx_end;
- unsigned int skblen;
- u32 ampdu_status;
- u32 ampdu_status_legacy;
-
- if (!include_phy && priv->last_phy_res[0])
- rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
-
- if (!rx_start) {
- IWL_ERR(priv, "MPDU frame without a PHY data\n");
- return;
- }
- if (include_phy) {
- hdr = (struct ieee80211_hdr *)((u8 *) &rx_start[1] +
- rx_start->cfg_phy_cnt);
-
- len = le16_to_cpu(rx_start->byte_count);
-
- rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] +
- sizeof(struct iwl_rx_phy_res) +
- rx_start->cfg_phy_cnt + len);
-
- } else {
- struct iwl4965_rx_mpdu_res_start *amsdu =
- (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
-
- hdr = (struct ieee80211_hdr *)(pkt->u.raw +
- sizeof(struct iwl4965_rx_mpdu_res_start));
- len = le16_to_cpu(amsdu->byte_count);
- rx_start->byte_count = amsdu->byte_count;
- rx_end = (__le32 *) (((u8 *) hdr) + len);
- }
-
- ampdu_status = le32_to_cpu(*rx_end);
- skblen = ((u8 *) rx_end - (u8 *) &pkt->u.raw[0]) + sizeof(u32);
-
- if (!include_phy) {
- /* New status scheme, need to translate */
- ampdu_status_legacy = ampdu_status;
- ampdu_status = iwl_translate_rx_status(priv, ampdu_status);
- }
-
- /* start from MAC */
- skb_reserve(rxb->skb, (void *)hdr - (void *)pkt);
- skb_put(rxb->skb, len); /* end where data ends */
-
/* We only process data packets if the interface is open */
if (unlikely(!priv->is_open)) {
IWL_DEBUG_DROP_LIMIT(priv,
@@ -924,15 +867,18 @@
return;
}
- hdr = (struct ieee80211_hdr *)rxb->skb->data;
-
- /* in case of HW accelerated crypto and bad decryption, drop */
- if (!priv->hw_params.sw_crypto &&
+ /* In case of HW accelerated crypto and bad decryption, drop */
+ if (!priv->cfg->mod_params->sw_crypto &&
iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
- iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len);
- ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
+ /* Resize SKB from mac header to end of packet */
+ skb_reserve(rxb->skb, (void *)hdr - (void *)rxb->skb->data);
+ skb_put(rxb->skb, len);
+
+ iwl_update_stats(priv, false, hdr->frame_control, len);
+ memcpy(IEEE80211_SKB_RXCB(rxb->skb), stats, sizeof(*stats));
+ ieee80211_rx_irqsafe(priv->hw, rxb->skb);
priv->alloc_rxb_skb--;
rxb->skb = NULL;
}
@@ -963,82 +909,80 @@
struct ieee80211_hdr *header;
struct ieee80211_rx_status rx_status;
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- /* Use phy data (Rx signal strength, etc.) contained within
- * this rx packet for legacy frames,
- * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */
- int include_phy = (pkt->hdr.cmd == REPLY_RX);
- struct iwl_rx_phy_res *rx_start = (include_phy) ?
- (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) :
- (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
- __le32 *rx_end;
- unsigned int len = 0;
+ struct iwl_rx_phy_res *phy_res;
+ __le32 rx_pkt_status;
+ struct iwl4965_rx_mpdu_res_start *amsdu;
+ u32 len;
+ u32 ampdu_status;
u16 fc;
- u8 network_packet;
+ u32 rate_n_flags;
- rx_status.mactime = le64_to_cpu(rx_start->timestamp);
+ /**
+ * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
+ * REPLY_RX: physical layer info is in this buffer
+ * REPLY_RX_MPDU_CMD: physical layer info was sent in separate
+ * command and cached in priv->last_phy_res
+ *
+ * Here we set up local variables depending on which command is
+ * received.
+ */
+ if (pkt->hdr.cmd == REPLY_RX) {
+ phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
+ + phy_res->cfg_phy_cnt);
+
+ len = le16_to_cpu(phy_res->byte_count);
+ rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
+ phy_res->cfg_phy_cnt + len);
+ ampdu_status = le32_to_cpu(rx_pkt_status);
+ } else {
+ if (!priv->last_phy_res[0]) {
+ IWL_ERR(priv, "MPDU frame without cached PHY data\n");
+ return;
+ }
+ phy_res = (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
+ amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
+ len = le16_to_cpu(amsdu->byte_count);
+ rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
+ ampdu_status = iwl_translate_rx_status(priv,
+ le32_to_cpu(rx_pkt_status));
+ }
+
+ if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
+ IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
+ phy_res->cfg_phy_cnt);
+ return;
+ }
+
+ if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
+ le32_to_cpu(rx_pkt_status));
+ return;
+ }
+
+ /* This will be used in several places later */
+ rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
+
+ /* rx_status carries information about the packet to mac80211 */
+ rx_status.mactime = le64_to_cpu(phy_res->timestamp);
rx_status.freq =
- ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel));
- rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+ ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
+ rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
rx_status.rate_idx =
- iwl_hwrate_to_plcp_idx(le32_to_cpu(rx_start->rate_n_flags));
- if (rx_status.band == IEEE80211_BAND_5GHZ)
- rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
-
+ iwl_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
rx_status.flag = 0;
/* TSF isn't reliable. In order to allow smooth user experience,
* this W/A doesn't propagate it to the mac80211 */
/*rx_status.flag |= RX_FLAG_TSFT;*/
- if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
- IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
- rx_start->cfg_phy_cnt);
- return;
- }
-
- if (!include_phy) {
- if (priv->last_phy_res[0])
- rx_start = (struct iwl_rx_phy_res *)
- &priv->last_phy_res[1];
- else
- rx_start = NULL;
- }
-
- if (!rx_start) {
- IWL_ERR(priv, "MPDU frame without a PHY data\n");
- return;
- }
-
- if (include_phy) {
- header = (struct ieee80211_hdr *)((u8 *) &rx_start[1]
- + rx_start->cfg_phy_cnt);
-
- len = le16_to_cpu(rx_start->byte_count);
- rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt +
- sizeof(struct iwl_rx_phy_res) + len);
- } else {
- struct iwl4965_rx_mpdu_res_start *amsdu =
- (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
-
- header = (void *)(pkt->u.raw +
- sizeof(struct iwl4965_rx_mpdu_res_start));
- len = le16_to_cpu(amsdu->byte_count);
- rx_end = (__le32 *) (pkt->u.raw +
- sizeof(struct iwl4965_rx_mpdu_res_start) + len);
- }
-
- if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) ||
- !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
- IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
- le32_to_cpu(*rx_end));
- return;
- }
-
- priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
+ priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
/* Find max signal strength (dBm) among 3 antenna/receiver chains */
- rx_status.signal = iwl_calc_rssi(priv, rx_start);
+ rx_status.signal = iwl_calc_rssi(priv, phy_res);
/* Meaningful noise values are available only from beacon statistics,
* which are gathered only when associated, and indicate noise
@@ -1058,13 +1002,14 @@
if (!iwl_is_associated(priv))
priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
- /* Set "1" to report good data frames in groups of 100 */
#ifdef CONFIG_IWLWIFI_DEBUG
- if (unlikely(priv->debug_level & IWL_DL_RX))
- iwl_dbg_report_frame(priv, rx_start, len, header, 1);
+ /* Set "1" to report good data frames in groups of 100 */
+ if (unlikely(iwl_get_debug_level(priv) & IWL_DL_RX))
+ iwl_dbg_report_frame(priv, phy_res, len, header, 1);
#endif
+ iwl_dbg_log_rx_data_frame(priv, len, header);
IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
- rx_status.signal, rx_status.noise, rx_status.signal,
+ rx_status.signal, rx_status.noise, rx_status.qual,
(unsigned long long)rx_status.mactime);
/*
@@ -1080,18 +1025,26 @@
* new 802.11n radiotap field "RX chains" that is defined
* as a bitmask.
*/
- rx_status.antenna = le16_to_cpu(rx_start->phy_flags &
- RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
+ rx_status.antenna =
+ le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+ >> RX_RES_PHY_FLAGS_ANTENNA_POS;
/* set the preamble flag if appropriate */
- if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
rx_status.flag |= RX_FLAG_SHORTPRE;
- network_packet = iwl_is_network_packet(priv, header);
- if (network_packet) {
+ /* Set up the HT phy flags */
+ if (rate_n_flags & RATE_MCS_HT_MSK)
+ rx_status.flag |= RX_FLAG_HT;
+ if (rate_n_flags & RATE_MCS_HT40_MSK)
+ rx_status.flag |= RX_FLAG_40MHZ;
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ rx_status.flag |= RX_FLAG_SHORT_GI;
+
+ if (iwl_is_network_packet(priv, header)) {
priv->last_rx_rssi = rx_status.signal;
priv->last_beacon_time = priv->ucode_beacon_time;
- priv->last_tsf = le64_to_cpu(rx_start->timestamp);
+ priv->last_tsf = le64_to_cpu(phy_res->timestamp);
}
fc = le16_to_cpu(header->frame_control);
@@ -1103,8 +1056,8 @@
header->addr2);
/* fall through */
default:
- iwl_pass_packet_to_mac80211(priv, include_phy, rxb,
- &rx_status);
+ iwl_pass_packet_to_mac80211(priv, header, len, ampdu_status,
+ rxb, &rx_status);
break;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index e26875d..4f3a108 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -109,13 +109,13 @@
}
EXPORT_SYMBOL(iwl_scan_cancel_timeout);
-int iwl_send_scan_abort(struct iwl_priv *priv)
+static int iwl_send_scan_abort(struct iwl_priv *priv)
{
int ret = 0;
struct iwl_rx_packet *res;
struct iwl_host_cmd cmd = {
.id = REPLY_SCAN_ABORT_CMD,
- .meta.flags = CMD_WANT_SKB,
+ .flags = CMD_WANT_SKB,
};
/* If there isn't a scan actively going on in the hardware
@@ -132,7 +132,7 @@
return ret;
}
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ res = (struct iwl_rx_packet *)cmd.reply_skb->data;
if (res->u.status != CAN_ABORT_STATUS) {
/* The scan abort will return 1 for success or
* 2 for "failure". A failure condition can be
@@ -146,11 +146,10 @@
}
priv->alloc_rxb_skb--;
- dev_kfree_skb_any(cmd.meta.u.skb);
+ dev_kfree_skb_any(cmd.reply_skb);
return ret;
}
-EXPORT_SYMBOL(iwl_send_scan_abort);
/* Service response to REPLY_SCAN_CMD (0x80) */
static void iwl_rx_reply_scan(struct iwl_priv *priv,
@@ -322,7 +321,7 @@
u8 is_active, u8 n_probes,
struct iwl_scan_channel *scan_ch)
{
- const struct ieee80211_channel *channels = NULL;
+ struct ieee80211_channel *chan;
const struct ieee80211_supported_band *sband;
const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
@@ -334,20 +333,19 @@
if (!sband)
return 0;
- channels = sband->channels;
-
active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
passive_dwell = iwl_get_passive_dwell_time(priv, band);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
- for (i = 0, added = 0; i < sband->n_channels; i++) {
- if (channels[i].flags & IEEE80211_CHAN_DISABLED)
+ for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+ chan = priv->scan_request->channels[i];
+
+ if (chan->band != band)
continue;
- channel =
- ieee80211_frequency_to_channel(channels[i].center_freq);
+ channel = ieee80211_frequency_to_channel(chan->center_freq);
scan_ch->channel = cpu_to_le16(channel);
ch_info = iwl_get_channel_info(priv, band, channel);
@@ -358,7 +356,7 @@
}
if (!is_active || is_channel_passive(ch_info) ||
- (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
else
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
@@ -405,7 +403,7 @@
priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
}
-int iwl_scan_initiate(struct iwl_priv *priv)
+static int iwl_scan_initiate(struct iwl_priv *priv)
{
if (!iwl_is_ready_rf(priv)) {
IWL_DEBUG_SCAN(priv, "Aborting scan due to not ready.\n");
@@ -423,10 +421,6 @@
}
IWL_DEBUG_INFO(priv, "Starting scan...\n");
- if (priv->cfg->sku & IWL_SKU_G)
- priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
- if (priv->cfg->sku & IWL_SKU_A)
- priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
set_bit(STATUS_SCANNING, &priv->status);
priv->scan_start = jiffies;
priv->scan_pass_start = priv->scan_start;
@@ -435,7 +429,6 @@
return 0;
}
-EXPORT_SYMBOL(iwl_scan_initiate);
#define IWL_DELAY_NEXT_SCAN (HZ*2)
@@ -444,7 +437,7 @@
{
unsigned long flags;
struct iwl_priv *priv = hw->priv;
- int ret;
+ int ret, i;
IWL_DEBUG_MAC80211(priv, "enter\n");
@@ -478,6 +471,10 @@
goto out_unlock;
}
+ priv->scan_bands = 0;
+ for (i = 0; i < req->n_channels; i++)
+ priv->scan_bands |= BIT(req->channels[i]->band);
+
priv->scan_request = req;
ret = iwl_scan_initiate(priv);
@@ -570,7 +567,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_SCAN_CMD,
.len = sizeof(struct iwl_scan_cmd),
- .meta.flags = CMD_SIZE_HUGE,
+ .flags = CMD_SIZE_HUGE,
};
struct iwl_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
@@ -799,7 +796,8 @@
{
struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
- if (!iwl_is_ready(priv))
+ if (!test_bit(STATUS_READY, &priv->status) ||
+ !test_bit(STATUS_GEO_CONFIGURED, &priv->status))
return;
mutex_lock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index ffd5c61..a2b9ec8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -97,8 +97,9 @@
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
-static int iwl_add_sta_callback(struct iwl_priv *priv,
- struct iwl_cmd *cmd, struct sk_buff *skb)
+static void iwl_add_sta_callback(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb)
{
struct iwl_rx_packet *res = NULL;
struct iwl_addsta_cmd *addsta =
@@ -107,14 +108,14 @@
if (!skb) {
IWL_ERR(priv, "Error: Response NULL in REPLY_ADD_STA.\n");
- return 1;
+ return;
}
res = (struct iwl_rx_packet *)skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
res->hdr.flags);
- return 1;
+ return;
}
switch (res->u.add_sta.status) {
@@ -126,9 +127,6 @@
res->u.add_sta.status);
break;
}
-
- /* We didn't cache the SKB; let the caller free it */
- return 1;
}
int iwl_send_add_sta(struct iwl_priv *priv,
@@ -139,14 +137,14 @@
u8 data[sizeof(*sta)];
struct iwl_host_cmd cmd = {
.id = REPLY_ADD_STA,
- .meta.flags = flags,
+ .flags = flags,
.data = data,
};
if (flags & CMD_ASYNC)
- cmd.meta.u.callback = iwl_add_sta_callback;
+ cmd.callback = iwl_add_sta_callback;
else
- cmd.meta.flags |= CMD_WANT_SKB;
+ cmd.flags |= CMD_WANT_SKB;
cmd.len = priv->cfg->ops->utils->build_addsta_hcmd(sta, data);
ret = iwl_send_cmd(priv, &cmd);
@@ -154,7 +152,7 @@
if (ret || (flags & CMD_ASYNC))
return ret;
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ res = (struct iwl_rx_packet *)cmd.reply_skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
res->hdr.flags);
@@ -175,7 +173,7 @@
}
priv->alloc_rxb_skb--;
- dev_kfree_skb_any(cmd.meta.u.skb);
+ dev_kfree_skb_any(cmd.reply_skb);
return ret;
}
@@ -216,10 +214,10 @@
sta_flags |= cpu_to_le32(
(u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS);
- if (iwl_is_fat_tx_allowed(priv, sta_ht_inf))
- sta_flags |= STA_FLG_FAT_EN_MSK;
+ if (iwl_is_ht40_tx_allowed(priv, sta_ht_inf))
+ sta_flags |= STA_FLG_HT40_EN_MSK;
else
- sta_flags &= ~STA_FLG_FAT_EN_MSK;
+ sta_flags &= ~STA_FLG_HT40_EN_MSK;
priv->stations[index].sta.station_flags = sta_flags;
done:
@@ -324,8 +322,9 @@
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
-static int iwl_remove_sta_callback(struct iwl_priv *priv,
- struct iwl_cmd *cmd, struct sk_buff *skb)
+static void iwl_remove_sta_callback(struct iwl_priv *priv,
+ struct iwl_device_cmd *cmd,
+ struct sk_buff *skb)
{
struct iwl_rx_packet *res = NULL;
struct iwl_rem_sta_cmd *rm_sta =
@@ -334,14 +333,14 @@
if (!skb) {
IWL_ERR(priv, "Error: Response NULL in REPLY_REMOVE_STA.\n");
- return 1;
+ return;
}
res = (struct iwl_rx_packet *)skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
res->hdr.flags);
- return 1;
+ return;
}
switch (res->u.rem_sta.status) {
@@ -352,9 +351,6 @@
IWL_ERR(priv, "REPLY_REMOVE_STA failed\n");
break;
}
-
- /* We didn't cache the SKB; let the caller free it */
- return 1;
}
static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr,
@@ -368,7 +364,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_REMOVE_STA,
.len = sizeof(struct iwl_rem_sta_cmd),
- .meta.flags = flags,
+ .flags = flags,
.data = &rm_sta_cmd,
};
@@ -377,15 +373,15 @@
memcpy(&rm_sta_cmd.addr, addr , ETH_ALEN);
if (flags & CMD_ASYNC)
- cmd.meta.u.callback = iwl_remove_sta_callback;
+ cmd.callback = iwl_remove_sta_callback;
else
- cmd.meta.flags |= CMD_WANT_SKB;
+ cmd.flags |= CMD_WANT_SKB;
ret = iwl_send_cmd(priv, &cmd);
if (ret || (flags & CMD_ASYNC))
return ret;
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ res = (struct iwl_rx_packet *)cmd.reply_skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
res->hdr.flags);
@@ -406,7 +402,7 @@
}
priv->alloc_rxb_skb--;
- dev_kfree_skb_any(cmd.meta.u.skb);
+ dev_kfree_skb_any(cmd.reply_skb);
return ret;
}
@@ -468,7 +464,6 @@
spin_unlock_irqrestore(&priv->sta_lock, flags);
return ret;
}
-EXPORT_SYMBOL(iwl_remove_station);
/**
* iwl_clear_stations_table - Clear the driver's station table
@@ -525,7 +520,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_WEPKEY,
.data = wep_cmd,
- .meta.flags = CMD_ASYNC,
+ .flags = CMD_SYNC,
};
memset(wep_cmd, 0, cmd_size +
@@ -930,7 +925,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_TX_LINK_QUALITY_CMD,
.len = sizeof(struct iwl_link_quality_cmd),
- .meta.flags = flags,
+ .flags = flags,
.data = lq,
};
@@ -1056,11 +1051,10 @@
int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
{
int sta_id;
- u16 fc = le16_to_cpu(hdr->frame_control);
+ __le16 fc = hdr->frame_control;
/* If this frame is broadcast or management, use broadcast station id */
- if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
- is_multicast_ether_addr(hdr->addr1))
+ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1))
return priv->hw_params.bcast_sta_id;
switch (priv->iw_mode) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 2e89040..a7422e5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -141,7 +141,7 @@
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
priv->cfg->ops->lib->txq_free_tfd(priv, txq);
- len = sizeof(struct iwl_cmd) * q->n_window;
+ len = sizeof(struct iwl_device_cmd) * q->n_window;
/* De-alloc array of command/tx buffers */
for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
@@ -156,6 +156,12 @@
kfree(txq->txb);
txq->txb = NULL;
+ /* deallocate arrays */
+ kfree(txq->cmd);
+ kfree(txq->meta);
+ txq->cmd = NULL;
+ txq->meta = NULL;
+
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
@@ -179,7 +185,7 @@
if (q->n_bd == 0)
return;
- len = sizeof(struct iwl_cmd) * q->n_window;
+ len = sizeof(struct iwl_device_cmd) * q->n_window;
len += IWL_MAX_SCAN_SIZE;
/* De-alloc array of command/tx buffers */
@@ -318,6 +324,7 @@
{
int i, len;
int ret;
+ int actual_slots = slots_num;
/*
* Alloc buffer array for commands (Tx or other types of commands).
@@ -327,14 +334,22 @@
* For normal Tx queues (all other queues), no super-size command
* space is needed.
*/
- len = sizeof(struct iwl_cmd);
- for (i = 0; i <= slots_num; i++) {
- if (i == slots_num) {
- if (txq_id == IWL_CMD_QUEUE_NUM)
- len += IWL_MAX_SCAN_SIZE;
- else
- continue;
- }
+ if (txq_id == IWL_CMD_QUEUE_NUM)
+ actual_slots++;
+
+ txq->meta = kzalloc(sizeof(struct iwl_cmd_meta) * actual_slots,
+ GFP_KERNEL);
+ txq->cmd = kzalloc(sizeof(struct iwl_device_cmd *) * actual_slots,
+ GFP_KERNEL);
+
+ if (!txq->meta || !txq->cmd)
+ goto out_free_arrays;
+
+ len = sizeof(struct iwl_device_cmd);
+ for (i = 0; i < actual_slots; i++) {
+ /* only happens for cmd queue */
+ if (i == slots_num)
+ len += IWL_MAX_SCAN_SIZE;
txq->cmd[i] = kmalloc(len, GFP_KERNEL);
if (!txq->cmd[i])
@@ -348,6 +363,10 @@
txq->need_update = 0;
+ /* aggregation TX queues will get their ID when aggregation begins */
+ if (txq_id <= IWL_TX_FIFO_AC3)
+ txq->swq_id = txq_id;
+
/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
* iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
@@ -360,15 +379,12 @@
return 0;
err:
- for (i = 0; i < slots_num; i++) {
+ for (i = 0; i < actual_slots; i++)
kfree(txq->cmd[i]);
- txq->cmd[i] = NULL;
- }
+out_free_arrays:
+ kfree(txq->meta);
+ kfree(txq->cmd);
- if (txq_id == IWL_CMD_QUEUE_NUM) {
- kfree(txq->cmd[slots_num]);
- txq->cmd[slots_num] = NULL;
- }
return -ENOMEM;
}
EXPORT_SYMBOL(iwl_tx_queue_init);
@@ -550,62 +566,81 @@
static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
- __le16 fc, int sta_id,
- int is_hcca)
+ __le16 fc, int is_hcca)
{
- u32 rate_flags = 0;
+ u32 rate_flags;
int rate_idx;
- u8 rts_retry_limit = 0;
- u8 data_retry_limit = 0;
+ u8 rts_retry_limit;
+ u8 data_retry_limit;
u8 rate_plcp;
- rate_idx = min(ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xffff,
- IWL_RATE_COUNT - 1);
-
- rate_plcp = iwl_rates[rate_idx].plcp;
-
- rts_retry_limit = (is_hcca) ?
- RTS_HCCA_RETRY_LIMIT : RTS_DFAULT_RETRY_LIMIT;
-
- if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
- rate_flags |= RATE_MCS_CCK_MSK;
-
-
- if (ieee80211_is_probe_resp(fc)) {
- data_retry_limit = 3;
- if (data_retry_limit < rts_retry_limit)
- rts_retry_limit = data_retry_limit;
- } else
- data_retry_limit = IWL_DEFAULT_TX_RETRY;
-
+ /* Set retry limit on DATA packets and Probe Responses*/
if (priv->data_retry_limit != -1)
data_retry_limit = priv->data_retry_limit;
+ else if (ieee80211_is_probe_resp(fc))
+ data_retry_limit = 3;
+ else
+ data_retry_limit = IWL_DEFAULT_TX_RETRY;
+ tx_cmd->data_retry_limit = data_retry_limit;
+ /* Set retry limit on RTS packets */
+ rts_retry_limit = (is_hcca) ? RTS_HCCA_RETRY_LIMIT :
+ RTS_DFAULT_RETRY_LIMIT;
+ if (data_retry_limit < rts_retry_limit)
+ rts_retry_limit = data_retry_limit;
+ tx_cmd->rts_retry_limit = rts_retry_limit;
+ /* DATA packets will use the uCode station table for rate/antenna
+ * selection */
if (ieee80211_is_data(fc)) {
tx_cmd->initial_rate_index = 0;
tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
- } else {
- switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
- case cpu_to_le16(IEEE80211_STYPE_AUTH):
- case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
- case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
- case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
- if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) {
- tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK;
- }
- break;
- default:
- break;
- }
-
- priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
- rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
+ return;
}
- tx_cmd->rts_retry_limit = rts_retry_limit;
- tx_cmd->data_retry_limit = data_retry_limit;
+ /**
+ * If the current TX rate stored in mac80211 has the MCS bit set, it's
+ * not really a TX rate. Thus, we use the lowest supported rate for
+ * this band. Also use the lowest supported rate if the stored rate
+ * index is invalid.
+ */
+ rate_idx = info->control.rates[0].idx;
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS ||
+ (rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY))
+ rate_idx = rate_lowest_index(&priv->bands[info->band],
+ info->control.sta);
+ /* For 5 GHZ band, remap mac80211 rate indices into driver indices */
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_idx += IWL_FIRST_OFDM_RATE;
+ /* Get PLCP rate for tx_cmd->rate_n_flags */
+ rate_plcp = iwl_rates[rate_idx].plcp;
+ /* Zero out flags for this packet */
+ rate_flags = 0;
+
+ /* Set CCK flag as needed */
+ if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
+ rate_flags |= RATE_MCS_CCK_MSK;
+
+ /* Set up RTS and CTS flags for certain packets */
+ switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+ case cpu_to_le16(IEEE80211_STYPE_AUTH):
+ case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+ case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+ case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
+ if (tx_cmd->tx_flags & TX_CMD_FLG_RTS_MSK) {
+ tx_cmd->tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ tx_cmd->tx_flags |= TX_CMD_FLG_CTS_MSK;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Set up antennas */
+ priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
+ rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
+
+ /* Set the rate in the TX cmd */
tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags);
}
@@ -652,14 +687,6 @@
}
}
-static void iwl_update_tx_stats(struct iwl_priv *priv, u16 fc, u16 len)
-{
- /* 0 - mgmt, 1 - cnt, 2 - data */
- int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2;
- priv->tx_stats[idx].cnt++;
- priv->tx_stats[idx].bytes += len;
-}
-
/*
* start REPLY_TX command process
*/
@@ -669,7 +696,8 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_tx_queue *txq;
struct iwl_queue *q;
- struct iwl_cmd *out_cmd;
+ struct iwl_device_cmd *out_cmd;
+ struct iwl_cmd_meta *out_meta;
struct iwl_tx_cmd *tx_cmd;
int swq_id, txq_id;
dma_addr_t phys_addr;
@@ -692,12 +720,6 @@
goto drop_unlock;
}
- if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) ==
- IWL_INVALID_RATE) {
- IWL_ERR(priv, "ERROR: No TX rate available.\n");
- goto drop_unlock;
- }
-
fc = hdr->frame_control;
#ifdef CONFIG_IWLWIFI_DEBUG
@@ -709,10 +731,9 @@
IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
#endif
- /* drop all data frame if we are not associated */
+ /* drop all non-injected data frame if we are not associated */
if (ieee80211_is_data(fc) &&
- (!iwl_is_monitor_mode(priv) ||
- !(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */
+ !(info->flags & IEEE80211_TX_CTL_INJECTED) &&
(!iwl_is_associated(priv) ||
((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id) ||
!priv->assoc_station_added)) {
@@ -723,7 +744,10 @@
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
- sta_id = iwl_get_sta_id(priv, hdr);
+ if (info->flags & IEEE80211_TX_CTL_INJECTED)
+ sta_id = priv->hw_params.bcast_sta_id;
+ else
+ sta_id = iwl_get_sta_id(priv, hdr);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
@@ -732,11 +756,12 @@
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
- swq_id = skb_get_queue_mapping(skb);
- txq_id = swq_id;
+ txq_id = skb_get_queue_mapping(skb);
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ if (unlikely(tid >= MAX_TID_COUNT))
+ goto drop_unlock;
seq_number = priv->stations[sta_id].tid[tid].seq_number;
seq_number &= IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = hdr->seq_ctrl &
@@ -744,15 +769,13 @@
hdr->seq_ctrl |= cpu_to_le16(seq_number);
seq_number += 0x10;
/* aggregation is on for this <sta,tid> */
- if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
- swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
- }
}
txq = &priv->txq[txq_id];
+ swq_id = txq->swq_id;
q = &txq->q;
- txq->swq_id = swq_id;
if (unlikely(iwl_queue_space(q) < q->high_mark))
goto drop_unlock;
@@ -766,6 +789,7 @@
/* Set up first empty entry in queue's array of Tx/cmd buffers */
out_cmd = txq->cmd[q->write_ptr];
+ out_meta = &txq->meta[q->write_ptr];
tx_cmd = &out_cmd->cmd.tx;
memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd));
@@ -793,12 +817,12 @@
/* TODO need this for burst mode later on */
iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
+ iwl_dbg_log_tx_data_frame(priv, len, hdr);
/* set is_hcca to 0; it probably will never be implemented */
- iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+ iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, 0);
- iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
-
+ iwl_update_stats(priv, true, fc, len);
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
@@ -828,8 +852,8 @@
txcmd_phys = pci_map_single(priv->pci_dev,
&out_cmd->hdr, len,
PCI_DMA_BIDIRECTIONAL);
- pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
- pci_unmap_len_set(&out_cmd->meta, len, len);
+ pci_unmap_addr_set(out_meta, mapping, txcmd_phys);
+ pci_unmap_len_set(out_meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
@@ -922,7 +946,8 @@
{
struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
struct iwl_queue *q = &txq->q;
- struct iwl_cmd *out_cmd;
+ struct iwl_device_cmd *out_cmd;
+ struct iwl_cmd_meta *out_meta;
dma_addr_t phys_addr;
unsigned long flags;
int len, ret;
@@ -936,25 +961,32 @@
* the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
* we will need to increase the size of the TFD entries */
BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
- !(cmd->meta.flags & CMD_SIZE_HUGE));
+ !(cmd->flags & CMD_SIZE_HUGE));
if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_INFO(priv, "Not sending command - RF KILL");
+ IWL_DEBUG_INFO(priv, "Not sending command - RF KILL\n");
return -EIO;
}
- if (iwl_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
+ if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
IWL_ERR(priv, "No space for Tx\n");
return -ENOSPC;
}
spin_lock_irqsave(&priv->hcmd_lock, flags);
- idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
+ idx = get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
out_cmd = txq->cmd[idx];
+ out_meta = &txq->meta[idx];
+
+ memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */
+ out_meta->flags = cmd->flags;
+ if (cmd->flags & CMD_WANT_SKB)
+ out_meta->source = cmd;
+ if (cmd->flags & CMD_ASYNC)
+ out_meta->callback = cmd->callback;
out_cmd->hdr.cmd = cmd->id;
- memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
/* At this point, the out_cmd now has all of the incoming cmd
@@ -963,9 +995,9 @@
out_cmd->hdr.flags = 0;
out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
INDEX_TO_SEQ(q->write_ptr));
- if (out_cmd->meta.flags & CMD_SIZE_HUGE)
+ if (cmd->flags & CMD_SIZE_HUGE)
out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
- len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta);
+ len = sizeof(struct iwl_device_cmd);
len += (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : 0;
@@ -997,8 +1029,8 @@
phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
fix_size, PCI_DMA_BIDIRECTIONAL);
- pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
- pci_unmap_len_set(&out_cmd->meta, len, fix_size);
+ pci_unmap_addr_set(out_meta, mapping, phys_addr);
+ pci_unmap_len_set(out_meta, len, fix_size);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
phys_addr, fix_size, 1,
@@ -1067,8 +1099,8 @@
}
pci_unmap_single(priv->pci_dev,
- pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping),
- pci_unmap_len(&txq->cmd[cmd_idx]->meta, len),
+ pci_unmap_addr(&txq->meta[cmd_idx], mapping),
+ pci_unmap_len(&txq->meta[cmd_idx], len),
PCI_DMA_BIDIRECTIONAL);
for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
@@ -1099,7 +1131,8 @@
int index = SEQ_TO_INDEX(sequence);
int cmd_index;
bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
- struct iwl_cmd *cmd;
+ struct iwl_device_cmd *cmd;
+ struct iwl_cmd_meta *meta;
/* If a Tx command is being handled and it isn't in the actual
* command queue then there a command routing bug has been introduced
@@ -1109,24 +1142,24 @@
txq_id, sequence,
priv->txq[IWL_CMD_QUEUE_NUM].q.read_ptr,
priv->txq[IWL_CMD_QUEUE_NUM].q.write_ptr)) {
- iwl_print_hex_dump(priv, IWL_DL_INFO , rxb, 32);
+ iwl_print_hex_error(priv, pkt, 32);
return;
}
cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
+ meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index];
/* Input error checking is done when commands are added to queue. */
- if (cmd->meta.flags & CMD_WANT_SKB) {
- cmd->meta.source->u.skb = rxb->skb;
+ if (meta->flags & CMD_WANT_SKB) {
+ meta->source->reply_skb = rxb->skb;
rxb->skb = NULL;
- } else if (cmd->meta.u.callback &&
- !cmd->meta.u.callback(priv, cmd, rxb->skb))
- rxb->skb = NULL;
+ } else if (meta->callback)
+ meta->callback(priv, cmd, rxb->skb);
iwl_hcmd_queue_reclaim(priv, txq_id, index, cmd_index);
- if (!(cmd->meta.flags & CMD_ASYNC)) {
+ if (!(meta->flags & CMD_ASYNC)) {
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
}
@@ -1189,6 +1222,7 @@
tid_data = &priv->stations[sta_id].tid[tid];
*ssn = SEQ_TO_SN(tid_data->seq_number);
tid_data->agg.txq_id = txq_id;
+ priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(tx_fifo, txq_id);
spin_unlock_irqrestore(&priv->sta_lock, flags);
ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo,
@@ -1221,6 +1255,9 @@
return -EINVAL;
}
+ if (unlikely(tid >= MAX_TID_COUNT))
+ return -EINVAL;
+
if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo)))
tx_fifo_id = default_tid_to_tx_fifo[tid];
else
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 5238433..2238c9f 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -89,7 +89,7 @@
/* module parameters */
struct iwl_mod_params iwl3945_mod_params = {
- .num_of_queues = IWL39_MAX_NUM_QUEUES,
+ .num_of_queues = IWL39_NUM_QUEUES, /* Not used */
.sw_crypto = 1,
.restart_fw = 1,
/* the rest are 0 by default */
@@ -361,79 +361,9 @@
priv->shared_phys);
}
-#define MAX_UCODE_BEACON_INTERVAL 1024
-#define INTEL_CONN_LISTEN_INTERVAL cpu_to_le16(0xA)
-
-static __le16 iwl3945_adjust_beacon_interval(u16 beacon_val)
-{
- u16 new_val = 0;
- u16 beacon_factor = 0;
-
- beacon_factor =
- (beacon_val + MAX_UCODE_BEACON_INTERVAL)
- / MAX_UCODE_BEACON_INTERVAL;
- new_val = beacon_val / beacon_factor;
-
- return cpu_to_le16(new_val);
-}
-
-static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
-{
- u64 interval_tm_unit;
- u64 tsf, result;
- unsigned long flags;
- struct ieee80211_conf *conf = NULL;
- u16 beacon_int = 0;
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp);
- priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
-
- tsf = priv->timestamp;
-
- beacon_int = priv->beacon_int;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (priv->iw_mode == NL80211_IFTYPE_STATION) {
- if (beacon_int == 0) {
- priv->rxon_timing.beacon_interval = cpu_to_le16(100);
- priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
- } else {
- priv->rxon_timing.beacon_interval =
- cpu_to_le16(beacon_int);
- priv->rxon_timing.beacon_interval =
- iwl3945_adjust_beacon_interval(
- le16_to_cpu(priv->rxon_timing.beacon_interval));
- }
-
- priv->rxon_timing.atim_window = 0;
- } else {
- priv->rxon_timing.beacon_interval =
- iwl3945_adjust_beacon_interval(
- priv->vif->bss_conf.beacon_int);
- /* TODO: we need to get atim_window from upper stack
- * for now we set to 0 */
- priv->rxon_timing.atim_window = 0;
- }
-
- interval_tm_unit =
- (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
- result = do_div(tsf, interval_tm_unit);
- priv->rxon_timing.beacon_init_val =
- cpu_to_le32((u32) ((u64) interval_tm_unit - result));
-
- IWL_DEBUG_ASSOC(priv,
- "beacon interval %d beacon timer %d beacon tim %d\n",
- le16_to_cpu(priv->rxon_timing.beacon_interval),
- le32_to_cpu(priv->rxon_timing.beacon_init_val),
- le16_to_cpu(priv->rxon_timing.atim_window));
-}
-
static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
- struct iwl_cmd *cmd,
+ struct iwl_device_cmd *cmd,
struct sk_buff *skb_frag,
int sta_id)
{
@@ -473,7 +403,7 @@
* handle build REPLY_TX command notification.
*/
static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
- struct iwl_cmd *cmd,
+ struct iwl_device_cmd *cmd,
struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr, u8 std_id)
{
@@ -546,7 +476,8 @@
struct iwl3945_tx_cmd *tx;
struct iwl_tx_queue *txq = NULL;
struct iwl_queue *q = NULL;
- struct iwl_cmd *out_cmd = NULL;
+ struct iwl_device_cmd *out_cmd;
+ struct iwl_cmd_meta *out_meta;
dma_addr_t phys_addr;
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
@@ -587,9 +518,9 @@
IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
#endif
- /* drop all data frame if we are not associated */
+ /* drop all non-injected data frame if we are not associated */
if (ieee80211_is_data(fc) &&
- (!iwl_is_monitor_mode(priv)) && /* packet injection */
+ !(info->flags & IEEE80211_TX_CTL_INJECTED) &&
(!iwl_is_associated(priv) ||
((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) {
IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
@@ -601,7 +532,10 @@
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
- sta_id = iwl_get_sta_id(priv, hdr);
+ if (info->flags & IEEE80211_TX_CTL_INJECTED)
+ sta_id = priv->hw_params.bcast_sta_id;
+ else
+ sta_id = iwl_get_sta_id(priv, hdr);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
@@ -613,6 +547,8 @@
if (ieee80211_is_data_qos(fc)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ if (unlikely(tid >= MAX_TID_COUNT))
+ goto drop;
seq_number = priv->stations[sta_id].tid[tid].seq_number &
IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = cpu_to_le16(seq_number) |
@@ -635,6 +571,7 @@
/* Init first empty entry in queue's array of Tx/cmd buffers */
out_cmd = txq->cmd[idx];
+ out_meta = &txq->meta[idx];
tx = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
memset(tx, 0, sizeof(*tx));
@@ -666,7 +603,8 @@
len = (u16)skb->len;
tx->len = cpu_to_le16(len);
-
+ iwl_dbg_log_tx_data_frame(priv, len, hdr);
+ iwl_update_stats(priv, true, fc, len);
tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
@@ -712,8 +650,8 @@
len, PCI_DMA_TODEVICE);
/* we do not map meta data ... so we can safely access address to
* provide to unmap command*/
- pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
- pci_unmap_len_set(&out_cmd->meta, len, len);
+ pci_unmap_addr_set(out_meta, mapping, txcmd_phys);
+ pci_unmap_len_set(out_meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
@@ -823,7 +761,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
.data = (void *)&spectrum,
- .meta.flags = CMD_WANT_SKB,
+ .flags = CMD_WANT_SKB,
};
u32 add_time = le64_to_cpu(params->start_time);
int rc;
@@ -864,7 +802,7 @@
if (rc)
return rc;
- res = (struct iwl_rx_packet *)cmd.meta.u.skb->data;
+ res = (struct iwl_rx_packet *)cmd.reply_skb->data;
if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
rc = -EIO;
@@ -887,7 +825,7 @@
break;
}
- dev_kfree_skb_any(cmd.meta.u.skb);
+ dev_kfree_skb_any(cmd.reply_skb);
return rc;
}
@@ -996,7 +934,7 @@
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
unsigned long status = priv->status;
- IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s\n",
+ IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
(flags & HW_CARD_DISABLED) ? "Kill" : "On",
(flags & SW_CARD_DISABLED) ? "Kill" : "On");
@@ -1435,7 +1373,7 @@
fill_rx = 1;
/* Rx interrupt, but nothing sent from uCode */
if (i == r)
- IWL_DEBUG(priv, IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
+ IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
while (i != r) {
rxb = rxq->queue[i];
@@ -1466,15 +1404,13 @@
* handle those that need handling via function in
* rx_handlers table. See iwl3945_setup_rx_handlers() */
if (priv->rx_handlers[pkt->hdr.cmd]) {
- IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
- "r = %d, i = %d, %s, 0x%02x\n", r, i,
+ IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
} else {
/* No handling needed */
- IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
- "r %d i %d No handler needed for %s, 0x%02x\n",
+ IWL_DEBUG_RX(priv, "r %d i %d No handler needed for %s, 0x%02x\n",
r, i, get_cmd_string(pkt->hdr.cmd),
pkt->hdr.cmd);
}
@@ -1714,7 +1650,7 @@
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & IWL_DL_ISR) {
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
@@ -1733,7 +1669,7 @@
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Microcode HW error detected. Restarting.\n");
+ IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
@@ -1749,7 +1685,7 @@
}
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
@@ -1828,7 +1764,7 @@
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
- if (priv->debug_level & (IWL_DL_ISR)) {
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
@@ -1844,7 +1780,7 @@
u8 is_active, u8 n_probes,
struct iwl3945_scan_channel *scan_ch)
{
- const struct ieee80211_channel *channels = NULL;
+ struct ieee80211_channel *chan;
const struct ieee80211_supported_band *sband;
const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
@@ -1855,19 +1791,19 @@
if (!sband)
return 0;
- channels = sband->channels;
-
active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
passive_dwell = iwl_get_passive_dwell_time(priv, band);
if (passive_dwell <= active_dwell)
passive_dwell = active_dwell + 1;
- for (i = 0, added = 0; i < sband->n_channels; i++) {
- if (channels[i].flags & IEEE80211_CHAN_DISABLED)
+ for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+ chan = priv->scan_request->channels[i];
+
+ if (chan->band != band)
continue;
- scan_ch->channel = channels[i].hw_value;
+ scan_ch->channel = chan->hw_value;
ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
@@ -1882,7 +1818,7 @@
* and use long active_dwell time.
*/
if (!is_active || is_channel_passive(ch_info) ||
- (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+ (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
scan_ch->type = 0; /* passive */
if (IWL_UCODE_API(priv->ucode_ver) == 1)
scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
@@ -2111,7 +2047,7 @@
*/
static int iwl3945_read_ucode(struct iwl_priv *priv)
{
- struct iwl_ucode *ucode;
+ const struct iwl_ucode_header *ucode;
int ret = -EINVAL, index;
const struct firmware *ucode_raw;
/* firmware file name contains uCode/driver compatibility version */
@@ -2152,22 +2088,24 @@
goto error;
/* Make sure that we got at least our header! */
- if (ucode_raw->size < sizeof(*ucode)) {
+ if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
ret = -EINVAL;
goto err_release;
}
/* Data from ucode file: header followed by uCode images */
- ucode = (void *)ucode_raw->data;
+ ucode = (struct iwl_ucode_header *)ucode_raw->data;
priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = le32_to_cpu(ucode->inst_size);
- data_size = le32_to_cpu(ucode->data_size);
- init_size = le32_to_cpu(ucode->init_size);
- init_data_size = le32_to_cpu(ucode->init_data_size);
- boot_size = le32_to_cpu(ucode->boot_size);
+ inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
+ data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
+ init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
+ init_data_size =
+ priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
+ boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
+ src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
@@ -2208,12 +2146,13 @@
/* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size < sizeof(*ucode) +
+ if (ucode_raw->size != priv->cfg->ops->ucode->get_header_size(api_ver) +
inst_size + data_size + init_size +
init_data_size + boot_size) {
- IWL_DEBUG_INFO(priv, "uCode file size %zd too small\n",
- ucode_raw->size);
+ IWL_DEBUG_INFO(priv,
+ "uCode file size %zd does not match expected size\n",
+ ucode_raw->size);
ret = -EINVAL;
goto err_release;
}
@@ -2296,44 +2235,44 @@
/* Copy images into buffers for card's bus-master reads ... */
/* Runtime instructions (first block of data in file) */
- src = &ucode->data[0];
- len = priv->ucode_code.len;
+ len = inst_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode instr len %zd\n", len);
memcpy(priv->ucode_code.v_addr, src, len);
+ src += len;
+
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
/* Runtime data (2nd block)
* NOTE: Copy into backup buffer will be done in iwl3945_up() */
- src = &ucode->data[inst_size];
- len = priv->ucode_data.len;
+ len = data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode data len %zd\n", len);
memcpy(priv->ucode_data.v_addr, src, len);
memcpy(priv->ucode_data_backup.v_addr, src, len);
+ src += len;
/* Initialization instructions (3rd block) */
if (init_size) {
- src = &ucode->data[inst_size + data_size];
- len = priv->ucode_init.len;
+ len = init_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init instr len %zd\n", len);
memcpy(priv->ucode_init.v_addr, src, len);
+ src += len;
}
/* Initialization data (4th block) */
if (init_data_size) {
- src = &ucode->data[inst_size + data_size + init_size];
- len = priv->ucode_init_data.len;
+ len = init_data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init data len %zd\n", len);
memcpy(priv->ucode_init_data.v_addr, src, len);
+ src += len;
}
/* Bootstrap instructions (5th block) */
- src = &ucode->data[inst_size + data_size + init_size + init_data_size];
- len = priv->ucode_boot.len;
+ len = boot_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) boot instr len %zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
@@ -2784,7 +2723,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_SCAN_CMD,
.len = sizeof(struct iwl3945_scan_cmd),
- .meta.flags = CMD_SIZE_HUGE,
+ .flags = CMD_SIZE_HUGE,
};
int rc = 0;
struct iwl3945_scan_cmd *scan;
@@ -3066,7 +3005,7 @@
iwlcore_commit_rxon(priv);
memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
- iwl3945_setup_rxon_timing(priv);
+ iwl_setup_rxon_timing(priv);
rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
sizeof(priv->rxon_timing), &priv->rxon_timing);
if (rc)
@@ -3261,7 +3200,7 @@
/* RXON Timing */
memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
- iwl3945_setup_rxon_timing(priv);
+ iwl_setup_rxon_timing(priv);
rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
sizeof(priv->rxon_timing),
&priv->rxon_timing);
@@ -3375,13 +3314,16 @@
* used for controlling the debug level.
*
* See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
*/
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
-
- return sprintf(buf, "0x%08X\n", priv->debug_level);
+ return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
@@ -3394,9 +3336,12 @@
ret = strict_strtoul(buf, 0, &val);
if (ret)
IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
- else
+ else {
priv->debug_level = val;
-
+ if (iwl_alloc_traffic_mem(priv))
+ IWL_ERR(priv,
+ "Not enough memory to generate traffic log\n");
+ }
return strnlen(buf, count);
}
@@ -3612,65 +3557,6 @@
store_retry_rate);
-static ssize_t store_power_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- int ret;
- unsigned long mode;
-
-
- mutex_lock(&priv->mutex);
-
- ret = strict_strtoul(buf, 10, &mode);
- if (ret)
- goto out;
-
- ret = iwl_power_set_user_mode(priv, mode);
- if (ret) {
- IWL_DEBUG_MAC80211(priv, "failed setting power mode.\n");
- goto out;
- }
- ret = count;
-
- out:
- mutex_unlock(&priv->mutex);
- return ret;
-}
-
-static ssize_t show_power_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- int level = priv->power_data.power_mode;
- char *p = buf;
-
- p += sprintf(p, "%d\n", level);
- return p - buf + 1;
-}
-
-static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR,
- show_power_level, store_power_level);
-
-#define MAX_WX_STRING 80
-
-/* Values are in microsecond */
-static const s32 timeout_duration[] = {
- 350000,
- 250000,
- 75000,
- 37000,
- 25000,
-};
-static const s32 period_duration[] = {
- 400000,
- 700000,
- 1000000,
- 1000000,
- 1000000
-};
-
static ssize_t show_channels(struct device *d,
struct device_attribute *attr, char *buf)
{
@@ -3847,7 +3733,6 @@
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
&dev_attr_measurement.attr,
#endif
- &dev_attr_power_level.attr,
&dev_attr_retry_rate.attr,
&dev_attr_statistics.attr,
&dev_attr_status.attr,
@@ -3912,8 +3797,6 @@
priv->qos_data.qos_cap.val = 0;
priv->rates_mask = IWL_RATES_MASK;
- /* If power management is turned on, default to CAM mode */
- priv->power_mode = IWL_POWER_MODE_CAM;
priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
@@ -3960,7 +3843,9 @@
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM |
- IEEE80211_HW_SPECTRUM_MGMT;
+ IEEE80211_HW_SPECTRUM_MGMT |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
@@ -4020,15 +3905,6 @@
priv = hw->priv;
SET_IEEE80211_DEV(hw, &pdev->dev);
- if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
- (iwl3945_mod_params.num_of_queues < IWL39_MIN_NUM_QUEUES)) {
- IWL_ERR(priv,
- "invalid queues_num, should be between %d and %d\n",
- IWL39_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
- err = -EINVAL;
- goto out_ieee80211_free_hw;
- }
-
/*
* Disabling hardware scan means that mac80211 will perform scans
* "the hard way", rather than using device's scan.
@@ -4045,9 +3921,10 @@
priv->inta_mask = CSR_INI_SET_MASK;
#ifdef CONFIG_IWLWIFI_DEBUG
- priv->debug_level = iwl3945_mod_params.debug;
atomic_set(&priv->restrict_refcnt, 0);
#endif
+ if (iwl_alloc_traffic_mem(priv))
+ IWL_ERR(priv, "Not enough memory to generate traffic log\n");
/***************************
* 2. Initializing PCI bus
@@ -4210,6 +4087,7 @@
pci_disable_device(pdev);
out_ieee80211_free_hw:
ieee80211_free_hw(priv->hw);
+ iwl_free_traffic_mem(priv);
out:
return err;
}
@@ -4265,6 +4143,7 @@
* until now... */
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
+ iwl_free_traffic_mem(priv);
free_irq(pdev->irq, priv);
pci_disable_msi(pdev);
@@ -4341,14 +4220,12 @@
module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto,
"using software crypto (default 1 [software])\n");
-module_param_named(debug, iwl3945_mod_params.debug, uint, 0444);
+#ifdef CONFIG_IWLWIFI_DEBUG
+module_param_named(debug, iwl_debug_level, uint, 0644);
MODULE_PARM_DESC(debug, "debug output mask");
+#endif
module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, 0444);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
-
-module_param_named(queues_num, iwl3945_mod_params.num_of_queues, int, 0444);
-MODULE_PARM_DESC(queues_num, "number of hw queues.");
-
module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 030401d..c62da43 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -2,7 +2,6 @@
tristate "Intel Wireless Multicomm 3200 WiFi driver"
depends on MMC && WLAN_80211 && EXPERIMENTAL
depends on CFG80211
- select WIRELESS_EXT
select FW_LOADER
help
The Intel Wireless Multicomm 3200 hardware is a combo
diff --git a/drivers/net/wireless/iwmc3200wifi/Makefile b/drivers/net/wireless/iwmc3200wifi/Makefile
index 927f022..d34291b 100644
--- a/drivers/net/wireless/iwmc3200wifi/Makefile
+++ b/drivers/net/wireless/iwmc3200wifi/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_IWM) := iwmc3200wifi.o
iwmc3200wifi-objs += main.o netdev.o rx.o tx.o sdio.o hal.o fw.o
-iwmc3200wifi-objs += commands.o wext.o cfg80211.o eeprom.o
+iwmc3200wifi-objs += commands.o cfg80211.o eeprom.o
iwmc3200wifi-$(CONFIG_IWM_DEBUG) += debugfs.o
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
index 96f714e..a56a2b0 100644
--- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -23,6 +23,7 @@
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <linux/wireless.h>
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
@@ -130,6 +131,134 @@
.n_bitrates = iwm_a_rates_size,
};
+static int iwm_key_init(struct iwm_key *key, u8 key_index,
+ const u8 *mac_addr, struct key_params *params)
+{
+ key->hdr.key_idx = key_index;
+ if (!mac_addr || is_broadcast_ether_addr(mac_addr)) {
+ key->hdr.multicast = 1;
+ memset(key->hdr.mac, 0xff, ETH_ALEN);
+ } else {
+ key->hdr.multicast = 0;
+ memcpy(key->hdr.mac, mac_addr, ETH_ALEN);
+ }
+
+ if (params) {
+ if (params->key_len > WLAN_MAX_KEY_LEN ||
+ params->seq_len > IW_ENCODE_SEQ_MAX_SIZE)
+ return -EINVAL;
+
+ key->cipher = params->cipher;
+ key->key_len = params->key_len;
+ key->seq_len = params->seq_len;
+ memcpy(key->key, params->key, key->key_len);
+ memcpy(key->seq, params->seq, key->seq_len);
+ }
+
+ return 0;
+}
+
+static int iwm_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
+ u8 key_index, const u8 *mac_addr,
+ struct key_params *params)
+{
+ struct iwm_priv *iwm = ndev_to_iwm(ndev);
+ struct iwm_key *key = &iwm->keys[key_index];
+ int ret;
+
+ IWM_DBG_WEXT(iwm, DBG, "Adding key for %pM\n", mac_addr);
+
+ memset(key, 0, sizeof(struct iwm_key));
+ ret = iwm_key_init(key, key_index, mac_addr, params);
+ if (ret < 0) {
+ IWM_ERR(iwm, "Invalid key_params\n");
+ return ret;
+ }
+
+ return iwm_set_key(iwm, 0, key);
+}
+
+static int iwm_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
+ u8 key_index, const u8 *mac_addr, void *cookie,
+ void (*callback)(void *cookie,
+ struct key_params*))
+{
+ struct iwm_priv *iwm = ndev_to_iwm(ndev);
+ struct iwm_key *key = &iwm->keys[key_index];
+ struct key_params params;
+
+ IWM_DBG_WEXT(iwm, DBG, "Getting key %d\n", key_index);
+
+ memset(¶ms, 0, sizeof(params));
+
+ params.cipher = key->cipher;
+ params.key_len = key->key_len;
+ params.seq_len = key->seq_len;
+ params.seq = key->seq;
+ params.key = key->key;
+
+ callback(cookie, ¶ms);
+
+ return key->key_len ? 0 : -ENOENT;
+}
+
+
+static int iwm_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+ u8 key_index, const u8 *mac_addr)
+{
+ struct iwm_priv *iwm = ndev_to_iwm(ndev);
+ struct iwm_key *key = &iwm->keys[key_index];
+
+ if (!iwm->keys[key_index].key_len) {
+ IWM_DBG_WEXT(iwm, DBG, "Key %d not used\n", key_index);
+ return 0;
+ }
+
+ if (key_index == iwm->default_key)
+ iwm->default_key = -1;
+
+ return iwm_set_key(iwm, 1, key);
+}
+
+static int iwm_cfg80211_set_default_key(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 key_index)
+{
+ struct iwm_priv *iwm = ndev_to_iwm(ndev);
+
+ IWM_DBG_WEXT(iwm, DBG, "Default key index is: %d\n", key_index);
+
+ if (!iwm->keys[key_index].key_len) {
+ IWM_ERR(iwm, "Key %d not used\n", key_index);
+ return -EINVAL;
+ }
+
+ iwm->default_key = key_index;
+
+ return iwm_set_tx_key(iwm, key_index);
+}
+
+static int iwm_cfg80211_get_station(struct wiphy *wiphy,
+ struct net_device *ndev,
+ u8 *mac, struct station_info *sinfo)
+{
+ struct iwm_priv *iwm = ndev_to_iwm(ndev);
+
+ if (memcmp(mac, iwm->bssid, ETH_ALEN))
+ return -ENOENT;
+
+ sinfo->filled |= STATION_INFO_TX_BITRATE;
+ sinfo->txrate.legacy = iwm->rate * 10;
+
+ if (test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ sinfo->signal = iwm->wstats.qual.level;
+ }
+
+ return 0;
+}
+
+
int iwm_cfg80211_inform_bss(struct iwm_priv *iwm)
{
struct wiphy *wiphy = iwm_to_wiphy(iwm);
@@ -167,20 +296,15 @@
return 0;
}
-static int iwm_cfg80211_change_iface(struct wiphy *wiphy, int ifindex,
+static int iwm_cfg80211_change_iface(struct wiphy *wiphy,
+ struct net_device *ndev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
- struct net_device *ndev;
struct wireless_dev *wdev;
struct iwm_priv *iwm;
u32 old_mode;
- /* we're under RTNL */
- ndev = __dev_get_by_index(&init_net, ifindex);
- if (!ndev)
- return -ENODEV;
-
wdev = ndev->ieee80211_ptr;
iwm = ndev_to_iwm(ndev);
old_mode = iwm->conf.mode;
@@ -203,11 +327,8 @@
iwm->umac_profile->mode = cpu_to_le32(iwm->conf.mode);
- if (iwm->umac_profile_active) {
- int ret = iwm_invalidate_mlme_profile(iwm);
- if (ret < 0)
- IWM_ERR(iwm, "Couldn't invalidate profile\n");
- }
+ if (iwm->umac_profile_active)
+ iwm_invalidate_mlme_profile(iwm);
return 0;
}
@@ -329,12 +450,300 @@
return 0;
}
+static int iwm_set_auth_type(struct iwm_priv *iwm,
+ enum nl80211_auth_type sme_auth_type)
+{
+ u8 *auth_type = &iwm->umac_profile->sec.auth_type;
+
+ switch (sme_auth_type) {
+ case NL80211_AUTHTYPE_AUTOMATIC:
+ case NL80211_AUTHTYPE_OPEN_SYSTEM:
+ IWM_DBG_WEXT(iwm, DBG, "OPEN auth\n");
+ *auth_type = UMAC_AUTH_TYPE_OPEN;
+ break;
+ case NL80211_AUTHTYPE_SHARED_KEY:
+ if (iwm->umac_profile->sec.flags &
+ (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK)) {
+ IWM_DBG_WEXT(iwm, DBG, "WPA auth alg\n");
+ *auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
+ } else {
+ IWM_DBG_WEXT(iwm, DBG, "WEP shared key auth alg\n");
+ *auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+ }
+
+ break;
+ default:
+ IWM_ERR(iwm, "Unsupported auth alg: 0x%x\n", sme_auth_type);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int iwm_set_wpa_version(struct iwm_priv *iwm, u32 wpa_version)
+{
+ IWM_DBG_WEXT(iwm, DBG, "wpa_version: %d\n", wpa_version);
+
+ if (!wpa_version) {
+ iwm->umac_profile->sec.flags = UMAC_SEC_FLG_LEGACY_PROFILE;
+ return 0;
+ }
+
+ if (wpa_version & NL80211_WPA_VERSION_2)
+ iwm->umac_profile->sec.flags = UMAC_SEC_FLG_RSNA_ON_MSK;
+
+ if (wpa_version & NL80211_WPA_VERSION_1)
+ iwm->umac_profile->sec.flags |= UMAC_SEC_FLG_WPA_ON_MSK;
+
+ return 0;
+}
+
+static int iwm_set_cipher(struct iwm_priv *iwm, u32 cipher, bool ucast)
+{
+ u8 *profile_cipher = ucast ? &iwm->umac_profile->sec.ucast_cipher :
+ &iwm->umac_profile->sec.mcast_cipher;
+
+ if (!cipher) {
+ *profile_cipher = UMAC_CIPHER_TYPE_NONE;
+ return 0;
+ }
+
+ IWM_DBG_WEXT(iwm, DBG, "%ccast cipher is 0x%x\n", ucast ? 'u' : 'm',
+ cipher);
+
+ switch (cipher) {
+ case IW_AUTH_CIPHER_NONE:
+ *profile_cipher = UMAC_CIPHER_TYPE_NONE;
+ break;
+ case WLAN_CIPHER_SUITE_WEP40:
+ *profile_cipher = UMAC_CIPHER_TYPE_WEP_40;
+ break;
+ case WLAN_CIPHER_SUITE_WEP104:
+ *profile_cipher = UMAC_CIPHER_TYPE_WEP_104;
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ *profile_cipher = UMAC_CIPHER_TYPE_TKIP;
+ break;
+ case WLAN_CIPHER_SUITE_CCMP:
+ *profile_cipher = UMAC_CIPHER_TYPE_CCMP;
+ break;
+ default:
+ IWM_ERR(iwm, "Unsupported cipher: 0x%x\n", cipher);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int iwm_set_key_mgt(struct iwm_priv *iwm, u32 key_mgt)
+{
+ u8 *auth_type = &iwm->umac_profile->sec.auth_type;
+
+ IWM_DBG_WEXT(iwm, DBG, "key_mgt: 0x%x\n", key_mgt);
+
+ if (key_mgt == WLAN_AKM_SUITE_8021X)
+ *auth_type = UMAC_AUTH_TYPE_8021X;
+ else if (key_mgt == WLAN_AKM_SUITE_PSK) {
+ if (iwm->umac_profile->sec.flags &
+ (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK))
+ *auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
+ else
+ *auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+ } else {
+ IWM_ERR(iwm, "Invalid key mgt: 0x%x\n", key_mgt);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int iwm_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_connect_params *sme)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+ struct ieee80211_channel *chan = sme->channel;
+ struct key_params key_param;
+ int ret;
+
+ if (!test_bit(IWM_STATUS_READY, &iwm->status))
+ return -EIO;
+
+ if (!sme->ssid)
+ return -EINVAL;
+
+ if (iwm->umac_profile_active) {
+ ret = iwm_invalidate_mlme_profile(iwm);
+ if (ret) {
+ IWM_ERR(iwm, "Couldn't invalidate profile\n");
+ return ret;
+ }
+ }
+
+ if (chan)
+ iwm->channel =
+ ieee80211_frequency_to_channel(chan->center_freq);
+
+ iwm->umac_profile->ssid.ssid_len = sme->ssid_len;
+ memcpy(iwm->umac_profile->ssid.ssid, sme->ssid, sme->ssid_len);
+
+ if (sme->bssid) {
+ IWM_DBG_WEXT(iwm, DBG, "BSSID: %pM\n", sme->bssid);
+ memcpy(&iwm->umac_profile->bssid[0], sme->bssid, ETH_ALEN);
+ iwm->umac_profile->bss_num = 1;
+ } else {
+ memset(&iwm->umac_profile->bssid[0], 0, ETH_ALEN);
+ iwm->umac_profile->bss_num = 0;
+ }
+
+ ret = iwm_set_wpa_version(iwm, sme->crypto.wpa_versions);
+ if (ret < 0)
+ return ret;
+
+ ret = iwm_set_auth_type(iwm, sme->auth_type);
+ if (ret < 0)
+ return ret;
+
+ if (sme->crypto.n_ciphers_pairwise) {
+ ret = iwm_set_cipher(iwm, sme->crypto.ciphers_pairwise[0],
+ true);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = iwm_set_cipher(iwm, sme->crypto.cipher_group, false);
+ if (ret < 0)
+ return ret;
+
+ if (sme->crypto.n_akm_suites) {
+ ret = iwm_set_key_mgt(iwm, sme->crypto.akm_suites[0]);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * We save the WEP key in case we want to do shared authentication.
+ * We have to do it so because UMAC will assert whenever it gets a
+ * key before a profile.
+ */
+ if (sme->key) {
+ key_param.key = kmemdup(sme->key, sme->key_len, GFP_KERNEL);
+ if (key_param.key == NULL)
+ return -ENOMEM;
+ key_param.key_len = sme->key_len;
+ key_param.seq_len = 0;
+ key_param.cipher = sme->crypto.ciphers_pairwise[0];
+
+ ret = iwm_key_init(&iwm->keys[sme->key_idx], sme->key_idx,
+ NULL, &key_param);
+ kfree(key_param.key);
+ if (ret < 0) {
+ IWM_ERR(iwm, "Invalid key_params\n");
+ return ret;
+ }
+
+ iwm->default_key = sme->key_idx;
+ }
+
+ ret = iwm_send_mlme_profile(iwm);
+
+ if (iwm->umac_profile->sec.auth_type != UMAC_AUTH_TYPE_LEGACY_PSK ||
+ sme->key == NULL)
+ return ret;
+
+ /*
+ * We want to do shared auth.
+ * We need to actually set the key we previously cached,
+ * and then tell the UMAC it's the default one.
+ * That will trigger the auth+assoc UMAC machinery, and again,
+ * this must be done after setting the profile.
+ */
+ ret = iwm_set_key(iwm, 0, &iwm->keys[sme->key_idx]);
+ if (ret < 0)
+ return ret;
+
+ return iwm_set_tx_key(iwm, iwm->default_key);
+}
+
+static int iwm_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
+ u16 reason_code)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+ IWM_DBG_WEXT(iwm, DBG, "Active: %d\n", iwm->umac_profile_active);
+
+ if (iwm->umac_profile_active)
+ iwm_invalidate_mlme_profile(iwm);
+
+ return 0;
+}
+
+static int iwm_cfg80211_set_txpower(struct wiphy *wiphy,
+ enum tx_power_setting type, int dbm)
+{
+ switch (type) {
+ case TX_POWER_AUTOMATIC:
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int iwm_cfg80211_get_txpower(struct wiphy *wiphy, int *dbm)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+ *dbm = iwm->txpower;
+
+ return 0;
+}
+
+static int iwm_cfg80211_set_power_mgmt(struct wiphy *wiphy,
+ struct net_device *dev,
+ bool enabled, int timeout)
+{
+ struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+ u32 power_index;
+
+ if (enabled)
+ power_index = IWM_POWER_INDEX_DEFAULT;
+ else
+ power_index = IWM_POWER_INDEX_MIN;
+
+ if (power_index == iwm->conf.power_index)
+ return 0;
+
+ iwm->conf.power_index = power_index;
+
+ return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+ CFG_POWER_INDEX, iwm->conf.power_index);
+}
+
static struct cfg80211_ops iwm_cfg80211_ops = {
.change_virtual_intf = iwm_cfg80211_change_iface,
+ .add_key = iwm_cfg80211_add_key,
+ .get_key = iwm_cfg80211_get_key,
+ .del_key = iwm_cfg80211_del_key,
+ .set_default_key = iwm_cfg80211_set_default_key,
+ .get_station = iwm_cfg80211_get_station,
.scan = iwm_cfg80211_scan,
.set_wiphy_params = iwm_cfg80211_set_wiphy_params,
+ .connect = iwm_cfg80211_connect,
+ .disconnect = iwm_cfg80211_disconnect,
.join_ibss = iwm_cfg80211_join_ibss,
.leave_ibss = iwm_cfg80211_leave_ibss,
+ .set_tx_power = iwm_cfg80211_set_txpower,
+ .get_tx_power = iwm_cfg80211_get_txpower,
+ .set_power_mgmt = iwm_cfg80211_set_power_mgmt,
+};
+
+static const u32 cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
};
struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev)
@@ -379,6 +788,9 @@
wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &iwm_band_5ghz;
wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+ wdev->wiphy->cipher_suites = cipher_suites;
+ wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+
ret = wiphy_register(wdev->wiphy);
if (ret < 0) {
dev_err(dev, "Couldn't register wiphy device\n");
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index e2334d1..23b52fa 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -70,14 +70,27 @@
int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
bool resp)
{
+ struct iwm_umac_wifi_if *hdr = (struct iwm_umac_wifi_if *)payload;
struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
struct iwm_umac_cmd umac_cmd;
+ int ret;
+ u8 oid = hdr->oid;
umac_cmd.id = UMAC_CMD_OPCODE_WIFI_IF_WRAPPER;
umac_cmd.resp = resp;
- return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd,
- payload, payload_size);
+ ret = iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd,
+ payload, payload_size);
+
+ if (resp) {
+ ret = wait_event_interruptible_timeout(iwm->wifi_ntfy_queue,
+ test_and_clear_bit(oid, &iwm->wifi_ntfy[0]),
+ 3 * HZ);
+
+ return ret ? 0 : -EBUSY;
+ }
+
+ return ret;
}
static struct coex_event iwm_sta_xor_prio_tbl[COEX_EVENTS_NUM] =
@@ -106,7 +119,7 @@
{4, 3, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
{3, 3, 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
{5, 5, 0, COEX_CALIBRATION_FLAGS},
- {4, 4, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+ {3, 3, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
{5, 4, 0, COEX_CONNECTION_ESTAB_FLAGS},
{4, 4, 0, COEX_ASSOCIATED_IDLE_FLAGS},
{4, 4, 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
@@ -332,8 +345,7 @@
return ret;
}
-int iwm_send_umac_config(struct iwm_priv *iwm,
- __le32 reset_flags)
+int iwm_send_umac_config(struct iwm_priv *iwm, __le32 reset_flags)
{
int ret;
@@ -361,6 +373,12 @@
return ret;
ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+ CFG_WIRELESS_MODE,
+ iwm->conf.wireless_mode);
+ if (ret < 0)
+ return ret;
+
+ ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
CFG_COEX_MODE, iwm->conf.coexist_mode);
if (ret < 0)
return ret;
@@ -402,7 +420,7 @@
return ret;
ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
- CFG_PM_CTRL_FLAGS, 0x30001);
+ CFG_PM_CTRL_FLAGS, 0x1);
if (ret < 0)
return ret;
@@ -462,8 +480,10 @@
target_cmd.eop = 1;
ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
- if (ret < 0)
+ if (ret < 0) {
IWM_ERR(iwm, "Couldn't send READ command\n");
+ return ret;
+ }
/* When succeding, the send_target routine returns the seq number */
seq_num = ret;
@@ -483,7 +503,7 @@
kfree(cmd);
- return ret;
+ return 0;
}
int iwm_read_mac(struct iwm_priv *iwm, u8 *mac)
@@ -493,7 +513,7 @@
ret = iwm_target_read(iwm, cpu_to_le32(WICO_MAC_ADDRESS_ADDR),
mac_align, sizeof(mac_align));
- if (ret < 0)
+ if (ret)
return ret;
if (is_valid_ether_addr(mac_align))
@@ -507,22 +527,6 @@
return 0;
}
-int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx)
-{
- struct iwm_umac_tx_key_id tx_key_id;
-
- if (!iwm->default_key || !iwm->default_key->in_use)
- return -EINVAL;
-
- tx_key_id.hdr.oid = UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID;
- tx_key_id.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_tx_key_id) -
- sizeof(struct iwm_umac_wifi_if));
-
- tx_key_id.key_idx = key_idx;
-
- return iwm_send_wifi_if_cmd(iwm, &tx_key_id, sizeof(tx_key_id), 1);
-}
-
static int iwm_check_profile(struct iwm_priv *iwm)
{
if (!iwm->umac_profile_active)
@@ -556,10 +560,35 @@
return 0;
}
-int iwm_set_key(struct iwm_priv *iwm, bool remove, bool set_tx_key,
- struct iwm_key *key)
+int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx)
{
+ struct iwm_umac_tx_key_id tx_key_id;
int ret;
+
+ ret = iwm_check_profile(iwm);
+ if (ret < 0)
+ return ret;
+
+ /* UMAC only allows to set default key for WEP and auth type is
+ * NOT 802.1X or RSNA. */
+ if ((iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_WEP_40 &&
+ iwm->umac_profile->sec.ucast_cipher != UMAC_CIPHER_TYPE_WEP_104) ||
+ iwm->umac_profile->sec.auth_type == UMAC_AUTH_TYPE_8021X ||
+ iwm->umac_profile->sec.auth_type == UMAC_AUTH_TYPE_RSNA_PSK)
+ return 0;
+
+ tx_key_id.hdr.oid = UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID;
+ tx_key_id.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_tx_key_id) -
+ sizeof(struct iwm_umac_wifi_if));
+
+ tx_key_id.key_idx = key_idx;
+
+ return iwm_send_wifi_if_cmd(iwm, &tx_key_id, sizeof(tx_key_id), 1);
+}
+
+int iwm_set_key(struct iwm_priv *iwm, bool remove, struct iwm_key *key)
+{
+ int ret = 0;
u8 cmd[64], *sta_addr, *key_data, key_len;
s8 key_idx;
u16 cmd_size = 0;
@@ -569,15 +598,6 @@
struct iwm_umac_key_tkip *tkip = (struct iwm_umac_key_tkip *)cmd;
struct iwm_umac_key_ccmp *ccmp = (struct iwm_umac_key_ccmp *)cmd;
- if (set_tx_key)
- iwm->default_key = key;
-
- /*
- * We check if our current profile is valid.
- * If not, we dont push the key, we just cache them,
- * so that with the next siwsessid call, the keys
- * will be actually pushed.
- */
if (!remove) {
ret = iwm_check_profile(iwm);
if (ret < 0)
@@ -590,8 +610,9 @@
key_idx = key->hdr.key_idx;
if (!remove) {
- IWM_DBG_WEXT(iwm, DBG, "key_idx:%d set tx key:%d\n",
- key_idx, set_tx_key);
+ u8 auth_type = iwm->umac_profile->sec.auth_type;
+
+ IWM_DBG_WEXT(iwm, DBG, "key_idx:%d\n", key_idx);
IWM_DBG_WEXT(iwm, DBG, "key_len:%d\n", key_len);
IWM_DBG_WEXT(iwm, DBG, "MAC:%pM, idx:%d, multicast:%d\n",
key_hdr->mac, key_hdr->key_idx, key_hdr->multicast);
@@ -603,8 +624,8 @@
iwm->umac_profile->sec.auth_type,
iwm->umac_profile->sec.flags);
- switch (key->alg) {
- case UMAC_CIPHER_TYPE_WEP_40:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
wep40->hdr.oid = UMAC_WIFI_IF_CMD_ADD_WEP40_KEY;
wep40->hdr.buf_size =
cpu_to_le16(sizeof(struct iwm_umac_key_wep40) -
@@ -613,12 +634,14 @@
memcpy(&wep40->key_hdr, key_hdr,
sizeof(struct iwm_umac_key_hdr));
memcpy(wep40->key, key_data, key_len);
- wep40->static_key = 1;
+ wep40->static_key =
+ !!((auth_type != UMAC_AUTH_TYPE_8021X) &&
+ (auth_type != UMAC_AUTH_TYPE_RSNA_PSK));
cmd_size = sizeof(struct iwm_umac_key_wep40);
break;
- case UMAC_CIPHER_TYPE_WEP_104:
+ case WLAN_CIPHER_SUITE_WEP104:
wep104->hdr.oid = UMAC_WIFI_IF_CMD_ADD_WEP104_KEY;
wep104->hdr.buf_size =
cpu_to_le16(sizeof(struct iwm_umac_key_wep104) -
@@ -627,12 +650,14 @@
memcpy(&wep104->key_hdr, key_hdr,
sizeof(struct iwm_umac_key_hdr));
memcpy(wep104->key, key_data, key_len);
- wep104->static_key = 1;
+ wep104->static_key =
+ !!((auth_type != UMAC_AUTH_TYPE_8021X) &&
+ (auth_type != UMAC_AUTH_TYPE_RSNA_PSK));
cmd_size = sizeof(struct iwm_umac_key_wep104);
break;
- case UMAC_CIPHER_TYPE_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
key_hdr->key_idx++;
ccmp->hdr.oid = UMAC_WIFI_IF_CMD_ADD_CCMP_KEY;
ccmp->hdr.buf_size =
@@ -644,13 +669,13 @@
memcpy(ccmp->key, key_data, key_len);
- if (key->flags & IW_ENCODE_EXT_RX_SEQ_VALID)
- memcpy(ccmp->iv_count, key->rx_seq, 6);
+ if (key->seq_len)
+ memcpy(ccmp->iv_count, key->seq, key->seq_len);
cmd_size = sizeof(struct iwm_umac_key_ccmp);
break;
- case UMAC_CIPHER_TYPE_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
key_hdr->key_idx++;
tkip->hdr.oid = UMAC_WIFI_IF_CMD_ADD_TKIP_KEY;
tkip->hdr.buf_size =
@@ -667,8 +692,8 @@
key_data + IWM_TKIP_KEY_SIZE + IWM_TKIP_MIC_SIZE,
IWM_TKIP_MIC_SIZE);
- if (key->flags & IW_ENCODE_EXT_RX_SEQ_VALID)
- memcpy(ccmp->iv_count, key->rx_seq, 6);
+ if (key->seq_len)
+ memcpy(ccmp->iv_count, key->seq, key->seq_len);
cmd_size = sizeof(struct iwm_umac_key_tkip);
break;
@@ -677,8 +702,8 @@
return -ENOTSUPP;
}
- if ((key->alg == UMAC_CIPHER_TYPE_CCMP) ||
- (key->alg == UMAC_CIPHER_TYPE_TKIP))
+ if ((key->cipher == WLAN_CIPHER_SUITE_TKIP) ||
+ (key->cipher == WLAN_CIPHER_SUITE_CCMP))
/*
* UGLY_UGLY_UGLY
* Copied HACK from the MWG driver.
@@ -689,23 +714,11 @@
schedule_timeout_interruptible(usecs_to_jiffies(300));
ret = iwm_send_wifi_if_cmd(iwm, cmd, cmd_size, 1);
- if (ret < 0)
- goto err;
-
- /*
- * We need a default key only if it is set and
- * if we're doing WEP.
- */
- if (iwm->default_key == key &&
- ((key->alg == UMAC_CIPHER_TYPE_WEP_40) ||
- (key->alg == UMAC_CIPHER_TYPE_WEP_104))) {
- ret = iwm_set_tx_key(iwm, key_idx);
- if (ret < 0)
- goto err;
- }
} else {
struct iwm_umac_key_remove key_remove;
+ IWM_DBG_WEXT(iwm, ERR, "Removing key_idx:%d\n", key_idx);
+
key_remove.hdr.oid = UMAC_WIFI_IF_CMD_REMOVE_KEY;
key_remove.hdr.buf_size =
cpu_to_le16(sizeof(struct iwm_umac_key_remove) -
@@ -716,23 +729,19 @@
ret = iwm_send_wifi_if_cmd(iwm, &key_remove,
sizeof(struct iwm_umac_key_remove),
1);
- if (ret < 0)
+ if (ret)
return ret;
- iwm->keys[key_idx].in_use = 0;
+ iwm->keys[key_idx].key_len = 0;
}
- return 0;
-
- err:
- kfree(key);
return ret;
}
int iwm_send_mlme_profile(struct iwm_priv *iwm)
{
- int ret, i;
+ int ret;
struct iwm_umac_profile profile;
memcpy(&profile, iwm->umac_profile, sizeof(profile));
@@ -742,45 +751,19 @@
sizeof(struct iwm_umac_wifi_if));
ret = iwm_send_wifi_if_cmd(iwm, &profile, sizeof(profile), 1);
- if (ret < 0) {
+ if (ret) {
IWM_ERR(iwm, "Send profile command failed\n");
return ret;
}
- /* Wait for the profile to be active */
- ret = wait_event_interruptible_timeout(iwm->mlme_queue,
- iwm->umac_profile_active == 1,
- 3 * HZ);
- if (!ret)
- return -EBUSY;
-
-
- for (i = 0; i < IWM_NUM_KEYS; i++)
- if (iwm->keys[i].in_use) {
- int default_key = 0;
- struct iwm_key *key = &iwm->keys[i];
-
- if (key == iwm->default_key)
- default_key = 1;
-
- /* Wait for the profile before sending the keys */
- wait_event_interruptible_timeout(iwm->mlme_queue,
- (test_bit(IWM_STATUS_ASSOCIATING, &iwm->status) ||
- test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)),
- 3 * HZ);
-
- ret = iwm_set_key(iwm, 0, default_key, key);
- if (ret < 0)
- return ret;
- }
-
+ set_bit(IWM_STATUS_SME_CONNECTING, &iwm->status);
return 0;
}
int iwm_invalidate_mlme_profile(struct iwm_priv *iwm)
{
- int ret;
struct iwm_umac_invalidate_profile invalid;
+ int ret;
invalid.hdr.oid = UMAC_WIFI_IF_CMD_INVALIDATE_PROFILE;
invalid.hdr.buf_size =
@@ -790,16 +773,13 @@
invalid.reason = WLAN_REASON_UNSPECIFIED;
ret = iwm_send_wifi_if_cmd(iwm, &invalid, sizeof(invalid), 1);
- if (ret < 0)
+ if (ret)
return ret;
ret = wait_event_interruptible_timeout(iwm->mlme_queue,
- (iwm->umac_profile_active == 0),
- 2 * HZ);
- if (!ret)
- return -EBUSY;
+ (iwm->umac_profile_active == 0), 2 * HZ);
- return 0;
+ return ret ? 0 : -EBUSY;
}
int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags)
@@ -882,7 +862,7 @@
}
ret = iwm_send_wifi_if_cmd(iwm, &req, sizeof(req), 0);
- if (ret < 0) {
+ if (ret) {
IWM_ERR(iwm, "Couldn't send scan request\n");
return ret;
}
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
index 36b13a1..e24d5b6 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.h
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -106,8 +106,7 @@
CFG_TLC_SPATIAL_STREAM_SUPPORTED,
CFG_TLC_RETRY_PER_RATE,
CFG_TLC_RETRY_PER_HT_RATE,
- CFG_TLC_FIXED_RATE,
- CFG_TLC_FIXED_RATE_FLAGS,
+ CFG_TLC_FIXED_MCS,
CFG_TLC_CONTROL_FLAGS,
CFG_TLC_SR_MIN_FAIL,
CFG_TLC_SR_MIN_PASS,
@@ -232,6 +231,7 @@
/* Wireless mode */
#define WIRELESS_MODE_11A 0x1
#define WIRELESS_MODE_11G 0x2
+#define WIRELESS_MODE_11N 0x4
#define UMAC_PROFILE_EX_IE_REQUIRED 0x1
#define UMAC_PROFILE_QOS_ALLOWED 0x2
@@ -406,8 +406,7 @@
int iwm_invalidate_mlme_profile(struct iwm_priv *iwm);
int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id);
int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx);
-int iwm_set_key(struct iwm_priv *iwm, bool remove, bool set_tx_key,
- struct iwm_key *key);
+int iwm_set_key(struct iwm_priv *iwm, bool remove, struct iwm_key *key);
int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags);
int iwm_send_umac_channel_list(struct iwm_priv *iwm);
int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
diff --git a/drivers/net/wireless/iwmc3200wifi/debug.h b/drivers/net/wireless/iwmc3200wifi/debug.h
index 8fbb42d..e35c9b6 100644
--- a/drivers/net/wireless/iwmc3200wifi/debug.h
+++ b/drivers/net/wireless/iwmc3200wifi/debug.h
@@ -108,6 +108,8 @@
struct dentry *txq_dentry;
struct dentry *tx_credit_dentry;
struct dentry *rx_ticket_dentry;
+
+ struct dentry *fw_err_dentry;
};
#ifdef CONFIG_IWM_DEBUG
diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c
index 0fa7b91..1465379 100644
--- a/drivers/net/wireless/iwmc3200wifi/debugfs.c
+++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c
@@ -98,7 +98,7 @@
iwm_debugfs_u32_read, iwm_debugfs_dbg_modules_write,
"%llu\n");
-static int iwm_txrx_open(struct inode *inode, struct file *filp)
+static int iwm_generic_open(struct inode *inode, struct file *filp)
{
filp->private_data = inode->i_private;
return 0;
@@ -289,25 +289,111 @@
return ret;
}
+static ssize_t iwm_debugfs_fw_err_read(struct file *filp,
+ char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+
+ struct iwm_priv *iwm = filp->private_data;
+ char buf[512];
+ int buf_len = 512;
+ size_t len = 0;
+
+ if (*ppos != 0)
+ return 0;
+ if (count < sizeof(buf))
+ return -ENOSPC;
+
+ if (!iwm->last_fw_err)
+ return -ENOMEM;
+
+ if (iwm->last_fw_err->line_num == 0)
+ goto out;
+
+ len += snprintf(buf + len, buf_len - len, "%cMAC FW ERROR:\n",
+ (le32_to_cpu(iwm->last_fw_err->category) == UMAC_SYS_ERR_CAT_LMAC)
+ ? 'L' : 'U');
+ len += snprintf(buf + len, buf_len - len,
+ "\tCategory: %d\n",
+ le32_to_cpu(iwm->last_fw_err->category));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tStatus: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->status));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tPC: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->pc));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tblink1: %d\n",
+ le32_to_cpu(iwm->last_fw_err->blink1));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tblink2: %d\n",
+ le32_to_cpu(iwm->last_fw_err->blink2));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tilink1: %d\n",
+ le32_to_cpu(iwm->last_fw_err->ilink1));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tilink2: %d\n",
+ le32_to_cpu(iwm->last_fw_err->ilink2));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tData1: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->data1));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tData2: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->data2));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tLine number: %d\n",
+ le32_to_cpu(iwm->last_fw_err->line_num));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tUMAC status: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->umac_status));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tLMAC status: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->lmac_status));
+
+ len += snprintf(buf + len, buf_len - len,
+ "\tSDIO status: 0x%x\n",
+ le32_to_cpu(iwm->last_fw_err->sdio_status));
+
+out:
+
+ return simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
+}
static const struct file_operations iwm_debugfs_txq_fops = {
.owner = THIS_MODULE,
- .open = iwm_txrx_open,
+ .open = iwm_generic_open,
.read = iwm_debugfs_txq_read,
};
static const struct file_operations iwm_debugfs_tx_credit_fops = {
.owner = THIS_MODULE,
- .open = iwm_txrx_open,
+ .open = iwm_generic_open,
.read = iwm_debugfs_tx_credit_read,
};
static const struct file_operations iwm_debugfs_rx_ticket_fops = {
.owner = THIS_MODULE,
- .open = iwm_txrx_open,
+ .open = iwm_generic_open,
.read = iwm_debugfs_rx_ticket_read,
};
+static const struct file_operations iwm_debugfs_fw_err_fops = {
+ .owner = THIS_MODULE,
+ .open = iwm_generic_open,
+ .read = iwm_debugfs_fw_err_read,
+};
+
int iwm_debugfs_init(struct iwm_priv *iwm)
{
int i, result;
@@ -423,6 +509,16 @@
goto error;
}
+ iwm->dbg.fw_err_dentry = debugfs_create_file("last_fw_err", 0200,
+ iwm->dbg.dbgdir, iwm,
+ &iwm_debugfs_fw_err_fops);
+ result = PTR_ERR(iwm->dbg.fw_err_dentry);
+ if (IS_ERR(iwm->dbg.fw_err_dentry) && (result != -ENODEV)) {
+ IWM_ERR(iwm, "Couldn't create last FW err: %d\n", result);
+ goto error;
+ }
+
+
return 0;
error:
@@ -441,6 +537,7 @@
debugfs_remove(iwm->dbg.txq_dentry);
debugfs_remove(iwm->dbg.tx_credit_dentry);
debugfs_remove(iwm->dbg.rx_ticket_dentry);
+ debugfs_remove(iwm->dbg.fw_err_dentry);
if (iwm->bus_ops->debugfs_exit)
iwm->bus_ops->debugfs_exit(iwm);
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.c b/drivers/net/wireless/iwmc3200wifi/eeprom.c
index 0f34b84..365910f 100644
--- a/drivers/net/wireless/iwmc3200wifi/eeprom.c
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.c
@@ -156,10 +156,6 @@
return -ENOMEM;
for (i = IWM_EEPROM_FIRST; i < IWM_EEPROM_LAST; i++) {
-#ifdef CONFIG_IWM_B0_HW_SUPPORT
- if (iwm->conf.hw_b0 && (i >= IWM_EEPROM_INDIRECT_OFFSET))
- break;
-#endif
ret = iwm_eeprom_read(iwm, i);
if (ret < 0) {
IWM_ERR(iwm, "Couldn't read eeprom entry #%d: %s\n",
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c
index ec1a15a..6b0bcad 100644
--- a/drivers/net/wireless/iwmc3200wifi/fw.c
+++ b/drivers/net/wireless/iwmc3200wifi/fw.c
@@ -261,6 +261,33 @@
cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
}
+static int iwm_init_calib(struct iwm_priv *iwm, unsigned long cfg_bitmap,
+ unsigned long expected_bitmap, u8 rx_iq_cmd)
+{
+ /* Read RX IQ calibration result from EEPROM */
+ if (test_bit(rx_iq_cmd, &cfg_bitmap)) {
+ iwm_store_rxiq_calib_result(iwm);
+ set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
+ }
+
+ iwm_send_prio_table(iwm);
+ iwm_send_init_calib_cfg(iwm, cfg_bitmap);
+
+ while (iwm->calib_done_map != expected_bitmap) {
+ if (iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
+ IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT)) {
+ IWM_DBG_FW(iwm, DBG, "Initial calibration timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
+ "0x%lx, expected calibrations: 0x%lx\n",
+ iwm->calib_done_map, expected_bitmap);
+ }
+
+ return 0;
+}
+
/*
* We currently have to load 3 FWs:
* 1) The UMAC (Upper MAC).
@@ -275,6 +302,8 @@
*/
int iwm_load_fw(struct iwm_priv *iwm)
{
+ unsigned long init_calib_map, periodic_calib_map;
+ unsigned long expected_calib_map;
int ret;
/* We first start downloading the UMAC */
@@ -315,32 +344,22 @@
return ret;
}
-#ifdef CONFIG_IWM_B0_HW_SUPPORT
- if (iwm->conf.hw_b0) {
- clear_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map);
- clear_bit(PHY_CALIBRATE_RX_IQ_CMD,
- &iwm->conf.periodic_calib_map);
- }
-#endif
- /* Read RX IQ calibration result from EEPROM */
- if (test_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->conf.init_calib_map)) {
- iwm_store_rxiq_calib_result(iwm);
- set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
- }
+ init_calib_map = iwm->conf.calib_map & IWM_CALIB_MAP_INIT_MSK;
+ expected_calib_map = iwm->conf.expected_calib_map &
+ IWM_CALIB_MAP_INIT_MSK;
+ periodic_calib_map = IWM_CALIB_MAP_PER_LMAC(iwm->conf.calib_map);
- iwm_send_prio_table(iwm);
- iwm_send_init_calib_cfg(iwm, iwm->conf.init_calib_map);
-
- while (iwm->calib_done_map != iwm->conf.init_calib_map) {
- ret = iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
- IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
- if (ret) {
- IWM_ERR(iwm, "Wait for calibration result timeout\n");
+ ret = iwm_init_calib(iwm, init_calib_map, expected_calib_map,
+ CALIB_CFG_RX_IQ_IDX);
+ if (ret < 0) {
+ /* Let's try the old way */
+ ret = iwm_init_calib(iwm, expected_calib_map,
+ expected_calib_map,
+ PHY_CALIBRATE_RX_IQ_CMD);
+ if (ret < 0) {
+ IWM_ERR(iwm, "Calibration result timeout\n");
goto out;
}
- IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
- "0x%lx, requested calibrations: 0x%lx\n",
- iwm->calib_done_map, iwm->conf.init_calib_map);
}
/* Handle LMAC CALIBRATION_COMPLETE notification */
@@ -378,7 +397,7 @@
iwm_send_prio_table(iwm);
iwm_send_calib_results(iwm);
- iwm_send_periodic_calib_cfg(iwm, iwm->conf.periodic_calib_map);
+ iwm_send_periodic_calib_cfg(iwm, periodic_calib_map);
return 0;
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index ee127fe4..c430418 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -105,9 +105,9 @@
#include "umac.h"
#include "debug.h"
-static void iwm_nonwifi_cmd_init(struct iwm_priv *iwm,
- struct iwm_nonwifi_cmd *cmd,
- struct iwm_udma_nonwifi_cmd *udma_cmd)
+static int iwm_nonwifi_cmd_init(struct iwm_priv *iwm,
+ struct iwm_nonwifi_cmd *cmd,
+ struct iwm_udma_nonwifi_cmd *udma_cmd)
{
INIT_LIST_HEAD(&cmd->pending);
@@ -118,7 +118,7 @@
cmd->seq_num = iwm->nonwifi_seq_num;
udma_cmd->seq_num = cpu_to_le16(cmd->seq_num);
- cmd->seq_num = iwm->nonwifi_seq_num++;
+ iwm->nonwifi_seq_num++;
iwm->nonwifi_seq_num %= UMAC_NONWIFI_SEQ_NUM_MAX;
if (udma_cmd->resp)
@@ -130,6 +130,8 @@
cmd->buf.len = 0;
memcpy(&cmd->udma_cmd, udma_cmd, sizeof(*udma_cmd));
+
+ return cmd->seq_num;
}
u16 iwm_alloc_wifi_cmd_seq(struct iwm_priv *iwm)
@@ -369,7 +371,7 @@
const void *payload)
{
struct iwm_nonwifi_cmd *cmd;
- int ret;
+ int ret, seq_num;
cmd = kzalloc(sizeof(struct iwm_nonwifi_cmd), GFP_KERNEL);
if (!cmd) {
@@ -377,7 +379,7 @@
return -ENOMEM;
}
- iwm_nonwifi_cmd_init(iwm, cmd, udma_cmd);
+ seq_num = iwm_nonwifi_cmd_init(iwm, cmd, udma_cmd);
if (cmd->udma_cmd.opcode == UMAC_HDI_OUT_OPCODE_WRITE ||
cmd->udma_cmd.opcode == UMAC_HDI_OUT_OPCODE_WRITE_PERSISTENT) {
@@ -393,7 +395,7 @@
if (ret < 0)
return ret;
- return cmd->seq_num;
+ return seq_num;
}
static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr,
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 77c339f..1b02a4e 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -52,8 +52,6 @@
#define IWM_COPYRIGHT "Copyright(c) 2009 Intel Corporation"
#define IWM_AUTHOR "<ilw@linux.intel.com>"
-#define CONFIG_IWM_B0_HW_SUPPORT 1
-
#define IWM_SRC_LMAC UMAC_HDI_IN_SOURCE_FHRX
#define IWM_SRC_UDMA UMAC_HDI_IN_SOURCE_UDMA
#define IWM_SRC_UMAC UMAC_HDI_IN_SOURCE_FW
@@ -65,8 +63,8 @@
struct iwm_conf {
u32 sdio_ior_timeout;
- unsigned long init_calib_map;
- unsigned long periodic_calib_map;
+ unsigned long calib_map;
+ unsigned long expected_calib_map;
bool reset_on_fatal_err;
bool auto_connect;
bool wimax_not_present;
@@ -87,9 +85,6 @@
u8 ibss_channel;
u8 mac_addr[ETH_ALEN];
-#ifdef CONFIG_IWM_B0_HW_SUPPORT
- bool hw_b0;
-#endif
};
enum {
@@ -162,13 +157,11 @@
struct iwm_key {
struct iwm_umac_key_hdr hdr;
- u8 in_use;
- u8 alg;
- u32 flags;
- u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE];
- u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE];
- u8 key_len;
- u8 key[32];
+ u32 cipher;
+ u8 key[WLAN_MAX_KEY_LEN];
+ u8 seq[IW_ENCODE_SEQ_MAX_SIZE];
+ int key_len;
+ int seq_len;
};
#define IWM_RX_ID_HASH 0xff
@@ -183,12 +176,9 @@
#define IWM_STATUS_READY 0
#define IWM_STATUS_SCANNING 1
#define IWM_STATUS_SCAN_ABORTING 2
-#define IWM_STATUS_ASSOCIATING 3
+#define IWM_STATUS_SME_CONNECTING 3
#define IWM_STATUS_ASSOCIATED 4
-
-#define IWM_RADIO_RFKILL_OFF 0
-#define IWM_RADIO_RFKILL_HW 1
-#define IWM_RADIO_RFKILL_SW 2
+#define IWM_STATUS_RESETTING 5
struct iwm_tx_queue {
int id;
@@ -223,7 +213,6 @@
struct iwm_conf conf;
unsigned long status;
- unsigned long radio;
struct list_head pending_notif;
wait_queue_head_t notif_queue;
@@ -242,6 +231,7 @@
u8 bssid[ETH_ALEN];
u8 channel;
u16 rate;
+ u32 txpower;
struct iwm_sta_info sta_table[IWM_STA_TABLE_NUM];
struct list_head bss_list;
@@ -276,12 +266,16 @@
struct iwm_tx_queue txq[IWM_TX_QUEUES];
struct iwm_key keys[IWM_NUM_KEYS];
- struct iwm_key *default_key;
+ s8 default_key;
+
+ DECLARE_BITMAP(wifi_ntfy, WIFI_IF_NTFY_MAX);
+ wait_queue_head_t wifi_ntfy_queue;
wait_queue_head_t mlme_queue;
struct iw_statistics wstats;
struct delayed_work stats_request;
+ struct delayed_work disconnect;
struct iwm_debugfs dbg;
@@ -289,7 +283,13 @@
struct timer_list watchdog;
struct work_struct reset_worker;
struct mutex mutex;
- struct rfkill *rfkill;
+
+ u8 *req_ie;
+ int req_ie_len;
+ u8 *resp_ie;
+ int resp_ie_len;
+
+ struct iwm_fw_error_hdr *last_fw_err;
char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
};
@@ -311,8 +311,6 @@
#define skb_to_rx_info(s) ((struct iwm_rx_info *)(s->cb))
#define skb_to_tx_info(s) ((struct iwm_tx_info *)s->cb)
-extern const struct iw_handler_def iwm_iw_handler_def;
-
void *iwm_if_alloc(int sizeof_bus, struct device *dev,
struct iwm_if_ops *if_ops);
void iwm_if_free(struct iwm_priv *iwm);
@@ -322,6 +320,7 @@
int iwm_priv_init(struct iwm_priv *iwm);
void iwm_priv_deinit(struct iwm_priv *iwm);
void iwm_reset(struct iwm_priv *iwm);
+void iwm_resetting(struct iwm_priv *iwm);
void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
struct iwm_umac_notif_alive *alive);
int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb);
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index db2e5ee..6c1a14c 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -396,6 +396,25 @@
CALIBRATION_CMD_NUM,
};
+enum {
+ CALIB_CFG_RX_BB_IDX = 0,
+ CALIB_CFG_DC_IDX = 1,
+ CALIB_CFG_LO_IDX = 2,
+ CALIB_CFG_TX_IQ_IDX = 3,
+ CALIB_CFG_RX_IQ_IDX = 4,
+ CALIB_CFG_NOISE_IDX = 5,
+ CALIB_CFG_CRYSTAL_IDX = 6,
+ CALIB_CFG_TEMPERATURE_IDX = 7,
+ CALIB_CFG_PAPD_IDX = 8,
+ CALIB_CFG_LAST_IDX = CALIB_CFG_PAPD_IDX,
+ CALIB_CFG_MODULE_NUM,
+};
+
+#define IWM_CALIB_MAP_INIT_MSK 0xFFFF
+#define IWM_CALIB_MAP_PER_LMAC(m) ((m & 0xFF0000) >> 16)
+#define IWM_CALIB_MAP_PER_UMAC(m) ((m & 0xFF000000) >> 24)
+#define IWM_CALIB_OPCODE_TO_INDEX(op) (op - PHY_CALIBRATE_OPCODES_NUM)
+
struct iwm_lmac_calib_hdr {
u8 opcode;
u8 first_grp;
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index 8be206d..d668e47 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -53,11 +53,12 @@
static struct iwm_conf def_iwm_conf = {
.sdio_ior_timeout = 5000,
- .init_calib_map = BIT(PHY_CALIBRATE_DC_CMD) |
- BIT(PHY_CALIBRATE_LO_CMD) |
- BIT(PHY_CALIBRATE_TX_IQ_CMD) |
- BIT(PHY_CALIBRATE_RX_IQ_CMD),
- .periodic_calib_map = BIT(PHY_CALIBRATE_DC_CMD) |
+ .calib_map = BIT(CALIB_CFG_DC_IDX) |
+ BIT(CALIB_CFG_LO_IDX) |
+ BIT(CALIB_CFG_TX_IQ_IDX) |
+ BIT(CALIB_CFG_RX_IQ_IDX) |
+ BIT(SHILOH_PHY_CALIBRATE_BASE_BAND_CMD),
+ .expected_calib_map = BIT(PHY_CALIBRATE_DC_CMD) |
BIT(PHY_CALIBRATE_LO_CMD) |
BIT(PHY_CALIBRATE_TX_IQ_CMD) |
BIT(PHY_CALIBRATE_RX_IQ_CMD) |
@@ -112,8 +113,28 @@
iwm_send_umac_stats_req(iwm, 0);
}
-int __iwm_up(struct iwm_priv *iwm);
-int __iwm_down(struct iwm_priv *iwm);
+static void iwm_disconnect_work(struct work_struct *work)
+{
+ struct iwm_priv *iwm =
+ container_of(work, struct iwm_priv, disconnect.work);
+
+ if (iwm->umac_profile_active)
+ iwm_invalidate_mlme_profile(iwm);
+
+ clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
+ iwm->umac_profile_active = 0;
+ memset(iwm->bssid, 0, ETH_ALEN);
+ iwm->channel = 0;
+
+ iwm_link_off(iwm);
+
+ wake_up_interruptible(&iwm->mlme_queue);
+
+ cfg80211_disconnected(iwm_to_ndev(iwm), 0, NULL, 0, GFP_KERNEL);
+}
+
+static int __iwm_up(struct iwm_priv *iwm);
+static int __iwm_down(struct iwm_priv *iwm);
static void iwm_reset_worker(struct work_struct *work)
{
@@ -166,7 +187,8 @@
memcpy(iwm->umac_profile, profile, sizeof(*profile));
iwm_send_mlme_profile(iwm);
kfree(profile);
- }
+ } else
+ clear_bit(IWM_STATUS_RESETTING, &iwm->status);
out:
mutex_unlock(&iwm->mutex);
@@ -179,7 +201,7 @@
IWM_WARN(iwm, "Watchdog expired: UMAC stalls!\n");
if (modparam_reset)
- schedule_work(&iwm->reset_worker);
+ iwm_resetting(iwm);
}
int iwm_priv_init(struct iwm_priv *iwm)
@@ -191,6 +213,7 @@
INIT_LIST_HEAD(&iwm->pending_notif);
init_waitqueue_head(&iwm->notif_queue);
init_waitqueue_head(&iwm->nonwifi_queue);
+ init_waitqueue_head(&iwm->wifi_ntfy_queue);
init_waitqueue_head(&iwm->mlme_queue);
memcpy(&iwm->conf, &def_iwm_conf, sizeof(struct iwm_conf));
spin_lock_init(&iwm->tx_credit.lock);
@@ -201,6 +224,7 @@
spin_lock_init(&iwm->cmd_lock);
iwm->scan_id = 1;
INIT_DELAYED_WORK(&iwm->stats_request, iwm_statistics_request);
+ INIT_DELAYED_WORK(&iwm->disconnect, iwm_disconnect_work);
INIT_WORK(&iwm->reset_worker, iwm_reset_worker);
INIT_LIST_HEAD(&iwm->bss_list);
@@ -229,13 +253,18 @@
for (i = 0; i < IWM_NUM_KEYS; i++)
memset(&iwm->keys[i], 0, sizeof(struct iwm_key));
- iwm->default_key = NULL;
+ iwm->default_key = -1;
init_timer(&iwm->watchdog);
iwm->watchdog.function = iwm_watchdog;
iwm->watchdog.data = (unsigned long)iwm;
mutex_init(&iwm->mutex);
+ iwm->last_fw_err = kzalloc(sizeof(struct iwm_fw_error_hdr),
+ GFP_KERNEL);
+ if (iwm->last_fw_err == NULL)
+ return -ENOMEM;
+
return 0;
}
@@ -247,6 +276,7 @@
destroy_workqueue(iwm->txq[i].wq);
destroy_workqueue(iwm->rx_wq);
+ kfree(iwm->last_fw_err);
}
/*
@@ -261,7 +291,11 @@
if (test_bit(IWM_STATUS_READY, &iwm->status))
iwm_target_reset(iwm);
- iwm->status = 0;
+ if (test_bit(IWM_STATUS_RESETTING, &iwm->status)) {
+ iwm->status = 0;
+ set_bit(IWM_STATUS_RESETTING, &iwm->status);
+ } else
+ iwm->status = 0;
iwm->scan_id = 1;
list_for_each_entry_safe(notif, next, &iwm->pending_notif, pending) {
@@ -277,6 +311,13 @@
iwm_link_off(iwm);
}
+void iwm_resetting(struct iwm_priv *iwm)
+{
+ set_bit(IWM_STATUS_RESETTING, &iwm->status);
+
+ schedule_work(&iwm->reset_worker);
+}
+
/*
* Notification code:
*
@@ -500,6 +541,13 @@
memset(wstats, 0, sizeof(struct iw_statistics));
wstats->qual.updated = IW_QUAL_ALL_INVALID;
+ kfree(iwm->req_ie);
+ iwm->req_ie = NULL;
+ iwm->req_ie_len = 0;
+ kfree(iwm->resp_ie);
+ iwm->resp_ie = NULL;
+ iwm->resp_ie_len = 0;
+
del_timer_sync(&iwm->watchdog);
}
@@ -518,13 +566,6 @@
{
int ret;
-#ifdef CONFIG_IWM_B0_HW_SUPPORT
- if (iwm->conf.hw_b0) {
- IWM_INFO(iwm, "Workaround EEPROM channels for B0 hardware\n");
- return 0;
- }
-#endif
-
ret = iwm_send_umac_channel_list(iwm);
if (ret) {
IWM_ERR(iwm, "Send channel list failed\n");
@@ -541,7 +582,7 @@
return 0;
}
-int __iwm_up(struct iwm_priv *iwm)
+static int __iwm_up(struct iwm_priv *iwm)
{
int ret;
struct iwm_notif *notif_reboot, *notif_ack = NULL;
@@ -642,19 +683,10 @@
}
}
- iwm->umac_profile = kmalloc(sizeof(struct iwm_umac_profile),
- GFP_KERNEL);
- if (!iwm->umac_profile) {
- IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
- goto err_fw;
- }
-
- iwm_init_default_profile(iwm, iwm->umac_profile);
-
ret = iwm_channels_init(iwm);
if (ret < 0) {
IWM_ERR(iwm, "Couldn't init channels\n");
- goto err_profile;
+ goto err_fw;
}
/* Set the READY bit to indicate interface is brought up successfully */
@@ -662,10 +694,6 @@
return 0;
- err_profile:
- kfree(iwm->umac_profile);
- iwm->umac_profile = NULL;
-
err_fw:
iwm_eeprom_exit(iwm);
@@ -688,7 +716,7 @@
return ret;
}
-int __iwm_down(struct iwm_priv *iwm)
+static int __iwm_down(struct iwm_priv *iwm)
{
int ret;
@@ -704,11 +732,10 @@
clear_bit(IWM_STATUS_READY, &iwm->status);
iwm_eeprom_exit(iwm);
- kfree(iwm->umac_profile);
- iwm->umac_profile = NULL;
iwm_bss_list_clean(iwm);
-
- iwm->default_key = NULL;
+ iwm_init_default_profile(iwm, iwm->umac_profile);
+ iwm->umac_profile_active = false;
+ iwm->default_key = -1;
iwm->core_enabled = 0;
ret = iwm_bus_disable(iwm);
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index bf294e4..35ec006 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -48,29 +48,22 @@
#include <linux/netdevice.h>
#include "iwm.h"
+#include "commands.h"
#include "cfg80211.h"
#include "debug.h"
static int iwm_open(struct net_device *ndev)
{
struct iwm_priv *iwm = ndev_to_iwm(ndev);
- int ret = 0;
- if (!test_bit(IWM_RADIO_RFKILL_SW, &iwm->radio))
- ret = iwm_up(iwm);
-
- return ret;
+ return iwm_up(iwm);
}
static int iwm_stop(struct net_device *ndev)
{
struct iwm_priv *iwm = ndev_to_iwm(ndev);
- int ret = 0;
- if (!test_bit(IWM_RADIO_RFKILL_SW, &iwm->radio))
- ret = iwm_down(iwm);
-
- return ret;
+ return iwm_down(iwm);
}
/*
@@ -128,13 +121,24 @@
}
ndev->netdev_ops = &iwm_netdev_ops;
- ndev->wireless_handlers = &iwm_iw_handler_def;
ndev->ieee80211_ptr = wdev;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
wdev->netdev = ndev;
+ iwm->umac_profile = kmalloc(sizeof(struct iwm_umac_profile),
+ GFP_KERNEL);
+ if (!iwm->umac_profile) {
+ dev_err(dev, "Couldn't alloc memory for profile\n");
+ goto out_profile;
+ }
+
+ iwm_init_default_profile(iwm, iwm->umac_profile);
+
return iwm;
+ out_profile:
+ free_netdev(ndev);
+
out_priv:
iwm_priv_deinit(iwm);
@@ -150,6 +154,8 @@
free_netdev(iwm_to_ndev(iwm));
iwm_priv_deinit(iwm);
+ kfree(iwm->umac_profile);
+ iwm->umac_profile = NULL;
iwm_wdev_free(iwm);
}
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index d73cf96..40dbcbc 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -102,6 +102,7 @@
error = (struct iwm_umac_notif_error *)buf;
fw_err = &error->err;
+ memcpy(iwm->last_fw_err, fw_err, sizeof(struct iwm_fw_error_hdr));
IWM_ERR(iwm, "%cMAC FW ERROR:\n",
(le32_to_cpu(fw_err->category) == UMAC_SYS_ERR_CAT_LMAC) ? 'L' : 'U');
@@ -119,6 +120,8 @@
IWM_ERR(iwm, "\tLMAC status: 0x%x\n", le32_to_cpu(fw_err->lmac_status));
IWM_ERR(iwm, "\tSDIO status: 0x%x\n", le32_to_cpu(fw_err->sdio_status));
+ iwm_resetting(iwm);
+
return 0;
}
@@ -143,17 +146,18 @@
unsigned long buf_size,
struct iwm_wifi_cmd *cmd)
{
+ struct wiphy *wiphy = iwm_to_wiphy(iwm);
struct iwm_umac_notif_init_complete *init_complete =
(struct iwm_umac_notif_init_complete *)(buf);
u16 status = le16_to_cpu(init_complete->status);
+ bool blocked = (status == UMAC_NTFY_INIT_COMPLETE_STATUS_ERR);
- if (status == UMAC_NTFY_INIT_COMPLETE_STATUS_ERR) {
+ if (blocked)
IWM_DBG_NTF(iwm, DBG, "Hardware rf kill is on (radio off)\n");
- set_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
- } else {
+ else
IWM_DBG_NTF(iwm, DBG, "Hardware rf kill is off (radio on)\n");
- clear_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
- }
+
+ wiphy_rfkill_set_hw_state(wiphy, blocked);
return 0;
}
@@ -218,17 +222,17 @@
(buf + sizeof(struct iwm_umac_wifi_in_hdr));
hdr = (struct iwm_umac_wifi_in_hdr *)buf;
- IWM_DBG_NTF(iwm, DBG, "REPLY_TX, buf size: %lu\n", buf_size);
+ IWM_DBG_TX(iwm, DBG, "REPLY_TX, buf size: %lu\n", buf_size);
- IWM_DBG_NTF(iwm, DBG, "Seqnum: %d\n",
- le16_to_cpu(hdr->sw_hdr.cmd.seq_num));
- IWM_DBG_NTF(iwm, DBG, "\tFrame cnt: %d\n", tx_resp->frame_cnt);
- IWM_DBG_NTF(iwm, DBG, "\tRetry cnt: %d\n",
- le16_to_cpu(tx_resp->retry_cnt));
- IWM_DBG_NTF(iwm, DBG, "\tSeq ctl: %d\n", le16_to_cpu(tx_resp->seq_ctl));
- IWM_DBG_NTF(iwm, DBG, "\tByte cnt: %d\n",
- le16_to_cpu(tx_resp->byte_cnt));
- IWM_DBG_NTF(iwm, DBG, "\tStatus: 0x%x\n", le32_to_cpu(tx_resp->status));
+ IWM_DBG_TX(iwm, DBG, "Seqnum: %d\n",
+ le16_to_cpu(hdr->sw_hdr.cmd.seq_num));
+ IWM_DBG_TX(iwm, DBG, "\tFrame cnt: %d\n", tx_resp->frame_cnt);
+ IWM_DBG_TX(iwm, DBG, "\tRetry cnt: %d\n",
+ le16_to_cpu(tx_resp->retry_cnt));
+ IWM_DBG_TX(iwm, DBG, "\tSeq ctl: %d\n", le16_to_cpu(tx_resp->seq_ctl));
+ IWM_DBG_TX(iwm, DBG, "\tByte cnt: %d\n",
+ le16_to_cpu(tx_resp->byte_cnt));
+ IWM_DBG_TX(iwm, DBG, "\tStatus: 0x%x\n", le32_to_cpu(tx_resp->status));
return 0;
}
@@ -418,8 +422,8 @@
if (IS_ERR(ticket_node))
return PTR_ERR(ticket_node);
- IWM_DBG_NTF(iwm, DBG, "TICKET RELEASE(%d)\n",
- ticket->id);
+ IWM_DBG_RX(iwm, DBG, "TICKET RELEASE(%d)\n",
+ ticket->id);
list_add_tail(&ticket_node->node, &iwm->rx_tickets);
/*
@@ -454,15 +458,15 @@
u16 id, buf_offset;
u32 packet_size;
- IWM_DBG_NTF(iwm, DBG, "\n");
+ IWM_DBG_RX(iwm, DBG, "\n");
wifi_hdr = (struct iwm_umac_wifi_in_hdr *)buf;
id = le16_to_cpu(wifi_hdr->sw_hdr.cmd.seq_num);
buf_offset = sizeof(struct iwm_umac_wifi_in_hdr);
packet_size = buf_size - sizeof(struct iwm_umac_wifi_in_hdr);
- IWM_DBG_NTF(iwm, DBG, "CMD:0x%x, seqnum: %d, packet size: %d\n",
- wifi_hdr->sw_hdr.cmd.cmd, id, packet_size);
+ IWM_DBG_RX(iwm, DBG, "CMD:0x%x, seqnum: %d, packet size: %d\n",
+ wifi_hdr->sw_hdr.cmd.cmd, id, packet_size);
IWM_DBG_RX(iwm, DBG, "Packet id: %d\n", id);
IWM_HEXDUMP(iwm, DBG, RX, "PACKET: ", buf + buf_offset, packet_size);
@@ -487,8 +491,6 @@
start = (struct iwm_umac_notif_assoc_start *)buf;
- set_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
-
IWM_DBG_MLME(iwm, INFO, "Association with %pM Started, reason: %d\n",
start->bssid, le32_to_cpu(start->roam_reason));
@@ -503,43 +505,84 @@
{
struct iwm_umac_notif_assoc_complete *complete =
(struct iwm_umac_notif_assoc_complete *)buf;
- union iwreq_data wrqu;
IWM_DBG_MLME(iwm, INFO, "Association with %pM completed, status: %d\n",
complete->bssid, complete->status);
- memset(&wrqu, 0, sizeof(wrqu));
-
- clear_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
-
switch (le32_to_cpu(complete->status)) {
case UMAC_ASSOC_COMPLETE_SUCCESS:
set_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
memcpy(iwm->bssid, complete->bssid, ETH_ALEN);
iwm->channel = complete->channel;
+ /* Internal roaming state, avoid notifying SME. */
+ if (!test_and_clear_bit(IWM_STATUS_SME_CONNECTING, &iwm->status)
+ && iwm->conf.mode == UMAC_MODE_BSS) {
+ cancel_delayed_work(&iwm->disconnect);
+ cfg80211_roamed(iwm_to_ndev(iwm),
+ complete->bssid,
+ iwm->req_ie, iwm->req_ie_len,
+ iwm->resp_ie, iwm->resp_ie_len,
+ GFP_KERNEL);
+ break;
+ }
+
iwm_link_on(iwm);
- memcpy(wrqu.ap_addr.sa_data, complete->bssid, ETH_ALEN);
+ if (iwm->conf.mode == UMAC_MODE_IBSS)
+ goto ibss;
+
+ if (!test_bit(IWM_STATUS_RESETTING, &iwm->status))
+ cfg80211_connect_result(iwm_to_ndev(iwm),
+ complete->bssid,
+ iwm->req_ie, iwm->req_ie_len,
+ iwm->resp_ie, iwm->resp_ie_len,
+ WLAN_STATUS_SUCCESS,
+ GFP_KERNEL);
+ else
+ cfg80211_roamed(iwm_to_ndev(iwm),
+ complete->bssid,
+ iwm->req_ie, iwm->req_ie_len,
+ iwm->resp_ie, iwm->resp_ie_len,
+ GFP_KERNEL);
break;
case UMAC_ASSOC_COMPLETE_FAILURE:
clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
memset(iwm->bssid, 0, ETH_ALEN);
iwm->channel = 0;
+ /* Internal roaming state, avoid notifying SME. */
+ if (!test_and_clear_bit(IWM_STATUS_SME_CONNECTING, &iwm->status)
+ && iwm->conf.mode == UMAC_MODE_BSS) {
+ cancel_delayed_work(&iwm->disconnect);
+ break;
+ }
+
iwm_link_off(iwm);
+
+ if (iwm->conf.mode == UMAC_MODE_IBSS)
+ goto ibss;
+
+ if (!test_bit(IWM_STATUS_RESETTING, &iwm->status))
+ cfg80211_connect_result(iwm_to_ndev(iwm),
+ complete->bssid,
+ NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ GFP_KERNEL);
+ else
+ cfg80211_disconnected(iwm_to_ndev(iwm), 0, NULL, 0,
+ GFP_KERNEL);
+ break;
default:
break;
}
- if (iwm->conf.mode == UMAC_MODE_IBSS) {
- cfg80211_ibss_joined(iwm_to_ndev(iwm), iwm->bssid, GFP_KERNEL);
- return 0;
- }
+ clear_bit(IWM_STATUS_RESETTING, &iwm->status);
+ return 0;
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
- wireless_send_event(iwm_to_ndev(iwm), SIOCGIWAP, &wrqu, NULL);
-
+ ibss:
+ cfg80211_ibss_joined(iwm_to_ndev(iwm), iwm->bssid, GFP_KERNEL);
+ clear_bit(IWM_STATUS_RESETTING, &iwm->status);
return 0;
}
@@ -548,13 +591,20 @@
struct iwm_wifi_cmd *cmd)
{
struct iwm_umac_notif_profile_invalidate *invalid;
+ u32 reason;
invalid = (struct iwm_umac_notif_profile_invalidate *)buf;
+ reason = le32_to_cpu(invalid->reason);
- IWM_DBG_MLME(iwm, INFO, "Profile Invalidated. Reason: %d\n",
- le32_to_cpu(invalid->reason));
+ IWM_DBG_MLME(iwm, INFO, "Profile Invalidated. Reason: %d\n", reason);
- clear_bit(IWM_STATUS_ASSOCIATING, &iwm->status);
+ if (reason != UMAC_PROFILE_INVALID_REQUEST &&
+ test_bit(IWM_STATUS_SME_CONNECTING, &iwm->status))
+ cfg80211_connect_result(iwm_to_ndev(iwm), NULL, NULL, 0, NULL,
+ 0, WLAN_STATUS_UNSPECIFIED_FAILURE,
+ GFP_KERNEL);
+
+ clear_bit(IWM_STATUS_SME_CONNECTING, &iwm->status);
clear_bit(IWM_STATUS_ASSOCIATED, &iwm->status);
iwm->umac_profile_active = 0;
@@ -568,6 +618,19 @@
return 0;
}
+#define IWM_DISCONNECT_INTERVAL (5 * HZ)
+
+static int iwm_mlme_connection_terminated(struct iwm_priv *iwm, u8 *buf,
+ unsigned long buf_size,
+ struct iwm_wifi_cmd *cmd)
+{
+ IWM_DBG_MLME(iwm, DBG, "Connection terminated\n");
+
+ schedule_delayed_work(&iwm->disconnect, IWM_DISCONNECT_INTERVAL);
+
+ return 0;
+}
+
static int iwm_mlme_scan_complete(struct iwm_priv *iwm, u8 *buf,
unsigned long buf_size,
struct iwm_wifi_cmd *cmd)
@@ -769,37 +832,47 @@
unsigned long buf_size, struct iwm_wifi_cmd *cmd)
{
struct iwm_umac_notif_mgt_frame *mgt_frame =
- (struct iwm_umac_notif_mgt_frame *)buf;
+ (struct iwm_umac_notif_mgt_frame *)buf;
struct ieee80211_mgmt *mgt = (struct ieee80211_mgmt *)mgt_frame->frame;
u8 *ie;
- unsigned int event;
- union iwreq_data wrqu;
IWM_HEXDUMP(iwm, DBG, MLME, "MGT: ", mgt_frame->frame,
le16_to_cpu(mgt_frame->len));
if (ieee80211_is_assoc_req(mgt->frame_control)) {
ie = mgt->u.assoc_req.variable;;
- event = IWEVASSOCREQIE;
+ iwm->req_ie_len =
+ le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+ kfree(iwm->req_ie);
+ iwm->req_ie = kmemdup(mgt->u.assoc_req.variable,
+ iwm->req_ie_len, GFP_KERNEL);
} else if (ieee80211_is_reassoc_req(mgt->frame_control)) {
ie = mgt->u.reassoc_req.variable;;
- event = IWEVASSOCREQIE;
+ iwm->req_ie_len =
+ le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+ kfree(iwm->req_ie);
+ iwm->req_ie = kmemdup(mgt->u.reassoc_req.variable,
+ iwm->req_ie_len, GFP_KERNEL);
} else if (ieee80211_is_assoc_resp(mgt->frame_control)) {
ie = mgt->u.assoc_resp.variable;;
- event = IWEVASSOCRESPIE;
+ iwm->resp_ie_len =
+ le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+ kfree(iwm->resp_ie);
+ iwm->resp_ie = kmemdup(mgt->u.assoc_resp.variable,
+ iwm->resp_ie_len, GFP_KERNEL);
} else if (ieee80211_is_reassoc_resp(mgt->frame_control)) {
ie = mgt->u.reassoc_resp.variable;;
- event = IWEVASSOCRESPIE;
+ iwm->resp_ie_len =
+ le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
+ kfree(iwm->resp_ie);
+ iwm->resp_ie = kmemdup(mgt->u.reassoc_resp.variable,
+ iwm->resp_ie_len, GFP_KERNEL);
} else {
- IWM_ERR(iwm, "Unsupported management frame");
+ IWM_ERR(iwm, "Unsupported management frame: 0x%x",
+ le16_to_cpu(mgt->frame_control));
return 0;
}
- wrqu.data.length = le16_to_cpu(mgt_frame->len) - (ie - (u8 *)mgt);
-
- IWM_HEXDUMP(iwm, DBG, MLME, "EVT: ", ie, wrqu.data.length);
- wireless_send_event(iwm_to_ndev(iwm), event, &wrqu, ie);
-
return 0;
}
@@ -817,8 +890,7 @@
case WIFI_IF_NTFY_PROFILE_INVALIDATE_COMPLETE:
return iwm_mlme_profile_invalidate(iwm, buf, buf_size, cmd);
case WIFI_IF_NTFY_CONNECTION_TERMINATED:
- IWM_DBG_MLME(iwm, DBG, "Connection terminated\n");
- break;
+ return iwm_mlme_connection_terminated(iwm, buf, buf_size, cmd);
case WIFI_IF_NTFY_SCAN_COMPLETE:
return iwm_mlme_scan_complete(iwm, buf, buf_size, cmd);
case WIFI_IF_NTFY_STA_TABLE_CHANGE:
@@ -875,6 +947,7 @@
/* UMAC passes rate info multiplies by 2 */
iwm->rate = max_rate >> 1;
}
+ iwm->txpower = le32_to_cpu(stats->tx_power);
wstats->status = 0;
@@ -922,13 +995,6 @@
if ((hdr_offset + hdr_len) > IWM_EEPROM_LEN)
return -EINVAL;
-#ifdef CONFIG_IWM_B0_HW_SUPPORT
- if (hdr_offset == IWM_EEPROM_SKU_CAP_OFF) {
- if (eeprom_proxy->buf[0] == 0xff)
- iwm->conf.hw_b0 = 1;
- }
-#endif
-
switch (hdr_type) {
case IWM_UMAC_CMD_EEPROM_TYPE_READ:
memcpy(iwm->eeprom + hdr_offset, eeprom_proxy->buf, hdr_len);
@@ -993,12 +1059,17 @@
(struct iwm_umac_wifi_if *)cmd->buf.payload;
IWM_DBG_NTF(iwm, DBG, "WIFI_IF_WRAPPER cmd is delivered to UMAC: "
- "oid is %d\n", hdr->oid);
+ "oid is 0x%x\n", hdr->oid);
+
+ if (hdr->oid <= WIFI_IF_NTFY_MAX) {
+ set_bit(hdr->oid, &iwm->wifi_ntfy[0]);
+ wake_up_interruptible(&iwm->wifi_ntfy_queue);
+ } else
+ return -EINVAL;
switch (hdr->oid) {
case UMAC_WIFI_IF_CMD_SET_PROFILE:
iwm->umac_profile_active = 1;
- wake_up_interruptible(&iwm->mlme_queue);
break;
default:
break;
@@ -1010,6 +1081,7 @@
static int iwm_ntf_card_state(struct iwm_priv *iwm, u8 *buf,
unsigned long buf_size, struct iwm_wifi_cmd *cmd)
{
+ struct wiphy *wiphy = iwm_to_wiphy(iwm);
struct iwm_lmac_card_state *state = (struct iwm_lmac_card_state *)
(buf + sizeof(struct iwm_umac_wifi_in_hdr));
u32 flags = le32_to_cpu(state->flags);
@@ -1018,10 +1090,7 @@
flags & IWM_CARD_STATE_HW_DISABLED ? "ON" : "OFF",
flags & IWM_CARD_STATE_CTKILL_DISABLED ? "ON" : "OFF");
- if (flags & IWM_CARD_STATE_HW_DISABLED)
- set_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
- else
- clear_bit(IWM_RADIO_RFKILL_HW, &iwm->radio);
+ wiphy_rfkill_set_hw_state(wiphy, flags & IWM_CARD_STATE_HW_DISABLED);
return 0;
}
@@ -1362,13 +1431,13 @@
skb->dev = iwm_to_ndev(iwm);
skb->protocol = eth_type_trans(skb, ndev);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->ip_summed = CHECKSUM_NONE;
memset(skb->cb, 0, sizeof(skb->cb));
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += skb->len;
- if (netif_rx(skb) == NET_RX_DROP) {
+ if (netif_rx_ni(skb) == NET_RX_DROP) {
IWM_ERR(iwm, "Packet dropped\n");
ndev->stats.rx_dropped++;
}
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
index 91668183..8b1de84 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.c
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -65,6 +65,7 @@
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/debugfs.h>
+#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
@@ -492,7 +493,8 @@
}
static const struct sdio_device_id iwm_sdio_ids[] = {
- { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, SDIO_DEVICE_ID_IWM) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
+ SDIO_DEVICE_ID_INTEL_IWMC3200WIFI) },
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(sdio, iwm_sdio_ids);
@@ -506,11 +508,7 @@
static int __init iwm_sdio_init_module(void)
{
- int ret;
-
- ret = sdio_register_driver(&iwm_sdio_driver);
-
- return ret;
+ return sdio_register_driver(&iwm_sdio_driver);
}
static void __exit iwm_sdio_exit_module(void)
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.h b/drivers/net/wireless/iwmc3200wifi/sdio.h
index b3c156b..aab6b68 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.h
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.h
@@ -39,9 +39,6 @@
#ifndef __IWM_SDIO_H__
#define __IWM_SDIO_H__
-#define SDIO_VENDOR_ID_INTEL 0x89
-#define SDIO_DEVICE_ID_IWM 0x1403
-
#define IWM_SDIO_DATA_ADDR 0x0
#define IWM_SDIO_INTR_ENABLE_ADDR 0x14
#define IWM_SDIO_INTR_STATUS_ADDR 0x13
diff --git a/drivers/net/wireless/iwmc3200wifi/umac.h b/drivers/net/wireless/iwmc3200wifi/umac.h
index 4a95cce..c5a14ae 100644
--- a/drivers/net/wireless/iwmc3200wifi/umac.h
+++ b/drivers/net/wireless/iwmc3200wifi/umac.h
@@ -495,6 +495,8 @@
#define WIFI_DBG_IF_NTFY_COEX_HANDLE_ENVELOP 0xE8
#define WIFI_DBG_IF_NTFY_COEX_HANDLE_RELEASE_ENVELOP 0xE9
+#define WIFI_IF_NTFY_MAX 0xff
+
/* Notification structures */
struct iwm_umac_notif_wifi_if {
struct iwm_umac_wifi_in_hdr hdr;
@@ -613,6 +615,7 @@
} __attribute__ ((packed));
struct iwm_umac_notif_init_complete {
+ struct iwm_umac_wifi_in_hdr hdr;
__le16 status;
__le16 reserved;
} __attribute__ ((packed));
@@ -641,6 +644,11 @@
__le32 umac_status;
__le32 lmac_status;
__le32 sdio_status;
+ __le32 dbm_sample_ctrl;
+ __le32 dbm_buf_base;
+ __le32 dbm_buf_end;
+ __le32 dbm_buf_write_ptr;
+ __le32 dbm_buf_cycle_cnt;
} __attribute__ ((packed));
struct iwm_umac_notif_error {
diff --git a/drivers/net/wireless/iwmc3200wifi/wext.c b/drivers/net/wireless/iwmc3200wifi/wext.c
deleted file mode 100644
index 584c94d..0000000
--- a/drivers/net/wireless/iwmc3200wifi/wext.c
+++ /dev/null
@@ -1,723 +0,0 @@
-/*
- * Intel Wireless Multicomm 3200 WiFi driver
- *
- * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com>
- * Samuel Ortiz <samuel.ortiz@intel.com>
- * Zhu Yi <yi.zhu@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <net/cfg80211.h>
-#include <net/iw_handler.h>
-
-#include "iwm.h"
-#include "umac.h"
-#include "commands.h"
-#include "debug.h"
-
-static struct iw_statistics *iwm_get_wireless_stats(struct net_device *dev)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- struct iw_statistics *wstats = &iwm->wstats;
-
- if (!test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
- memset(wstats, 0, sizeof(struct iw_statistics));
- wstats->qual.updated = IW_QUAL_ALL_INVALID;
- }
-
- return wstats;
-}
-
-static int iwm_wext_siwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- if (freq->flags == IW_FREQ_AUTO)
- return 0;
-
- /* frequency/channel can only be set in IBSS mode */
- if (iwm->conf.mode != UMAC_MODE_IBSS)
- return -EOPNOTSUPP;
-
- return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
-}
-
-static int iwm_wext_giwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- if (iwm->conf.mode == UMAC_MODE_IBSS)
- return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
-
- freq->e = 0;
- freq->m = iwm->channel;
-
- return 0;
-}
-
-static int iwm_wext_siwap(struct net_device *dev, struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- if (iwm->conf.mode == UMAC_MODE_IBSS)
- return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
-
- if (!test_bit(IWM_STATUS_READY, &iwm->status))
- return -EIO;
-
- if (is_zero_ether_addr(ap_addr->sa_data) ||
- is_broadcast_ether_addr(ap_addr->sa_data)) {
- IWM_DBG_WEXT(iwm, DBG, "clear mandatory bssid %pM\n",
- iwm->umac_profile->bssid[0]);
- memset(&iwm->umac_profile->bssid[0], 0, ETH_ALEN);
- iwm->umac_profile->bss_num = 0;
- } else {
- IWM_DBG_WEXT(iwm, DBG, "add mandatory bssid %pM\n",
- ap_addr->sa_data);
- memcpy(&iwm->umac_profile->bssid[0], ap_addr->sa_data,
- ETH_ALEN);
- iwm->umac_profile->bss_num = 1;
- }
-
- if (iwm->umac_profile_active) {
- if (!memcmp(&iwm->umac_profile->bssid[0], iwm->bssid, ETH_ALEN))
- return 0;
-
- iwm_invalidate_mlme_profile(iwm);
- }
-
- if (iwm->umac_profile->ssid.ssid_len)
- return iwm_send_mlme_profile(iwm);
-
- return 0;
-}
-
-static int iwm_wext_giwap(struct net_device *dev, struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- switch (iwm->conf.mode) {
- case UMAC_MODE_IBSS:
- return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
- case UMAC_MODE_BSS:
- if (test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, iwm->bssid, ETH_ALEN);
- } else
- memset(&ap_addr->sa_data, 0, ETH_ALEN);
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
-static int iwm_wext_siwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- size_t len = data->length;
- int ret;
-
- if (iwm->conf.mode == UMAC_MODE_IBSS)
- return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
-
- if (!test_bit(IWM_STATUS_READY, &iwm->status))
- return -EIO;
-
- if (len > 0 && ssid[len - 1] == '\0')
- len--;
-
- if (iwm->umac_profile_active) {
- if (iwm->umac_profile->ssid.ssid_len == len &&
- !memcmp(iwm->umac_profile->ssid.ssid, ssid, len))
- return 0;
-
- ret = iwm_invalidate_mlme_profile(iwm);
- if (ret < 0) {
- IWM_ERR(iwm, "Couldn't invalidate profile\n");
- return ret;
- }
- }
-
- iwm->umac_profile->ssid.ssid_len = len;
- memcpy(iwm->umac_profile->ssid.ssid, ssid, len);
-
- return iwm_send_mlme_profile(iwm);
-}
-
-static int iwm_wext_giwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- if (iwm->conf.mode == UMAC_MODE_IBSS)
- return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
-
- if (!test_bit(IWM_STATUS_READY, &iwm->status))
- return -EIO;
-
- data->length = iwm->umac_profile->ssid.ssid_len;
- if (data->length) {
- memcpy(ssid, iwm->umac_profile->ssid.ssid, data->length);
- data->flags = 1;
- } else
- data->flags = 0;
-
- return 0;
-}
-
-static struct iwm_key *
-iwm_key_init(struct iwm_priv *iwm, u8 key_idx, bool in_use,
- struct iw_encode_ext *ext, u8 alg)
-{
- struct iwm_key *key = &iwm->keys[key_idx];
-
- memset(key, 0, sizeof(struct iwm_key));
- memcpy(key->hdr.mac, ext->addr.sa_data, ETH_ALEN);
- key->hdr.key_idx = key_idx;
- if (is_broadcast_ether_addr(ext->addr.sa_data))
- key->hdr.multicast = 1;
-
- key->in_use = in_use;
- key->flags = ext->ext_flags;
- key->alg = alg;
- key->key_len = ext->key_len;
- memcpy(key->key, ext->key, ext->key_len);
-
- return key;
-}
-
-static int iwm_wext_giwrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rate, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- rate->value = iwm->rate * 1000000;
-
- return 0;
-}
-
-static int iwm_wext_siwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *key_buf)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- struct iwm_key *uninitialized_var(key);
- int idx, i, uninitialized_var(alg), remove = 0, ret;
-
- IWM_DBG_WEXT(iwm, DBG, "key len: %d\n", erq->length);
- IWM_DBG_WEXT(iwm, DBG, "flags: 0x%x\n", erq->flags);
-
- if (!iwm->umac_profile) {
- IWM_ERR(iwm, "UMAC profile not allocated yet\n");
- return -ENODEV;
- }
-
- if (erq->length == WLAN_KEY_LEN_WEP40) {
- alg = UMAC_CIPHER_TYPE_WEP_40;
- iwm->umac_profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_WEP_40;
- iwm->umac_profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_WEP_40;
- } else if (erq->length == WLAN_KEY_LEN_WEP104) {
- alg = UMAC_CIPHER_TYPE_WEP_104;
- iwm->umac_profile->sec.ucast_cipher = UMAC_CIPHER_TYPE_WEP_104;
- iwm->umac_profile->sec.mcast_cipher = UMAC_CIPHER_TYPE_WEP_104;
- }
-
- if (erq->flags & IW_ENCODE_RESTRICTED)
- iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
- else
- iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_OPEN;
-
- idx = erq->flags & IW_ENCODE_INDEX;
- if (idx == 0) {
- if (iwm->default_key)
- for (i = 0; i < IWM_NUM_KEYS; i++) {
- if (iwm->default_key == &iwm->keys[i]) {
- idx = i;
- break;
- }
- }
- else
- iwm->default_key = &iwm->keys[idx];
- } else if (idx < 1 || idx > 4) {
- return -EINVAL;
- } else
- idx--;
-
- if (erq->flags & IW_ENCODE_DISABLED)
- remove = 1;
- else if (erq->length == 0) {
- if (!iwm->keys[idx].in_use)
- return -EINVAL;
- iwm->default_key = &iwm->keys[idx];
- }
-
- if (erq->length) {
- key = &iwm->keys[idx];
- memset(key, 0, sizeof(struct iwm_key));
- memset(key->hdr.mac, 0xff, ETH_ALEN);
- key->hdr.key_idx = idx;
- key->hdr.multicast = 1;
- key->in_use = !remove;
- key->alg = alg;
- key->key_len = erq->length;
- memcpy(key->key, key_buf, erq->length);
-
- IWM_DBG_WEXT(iwm, DBG, "Setting key %d, default: %d\n",
- idx, !!iwm->default_key);
- }
-
- if (remove) {
- if ((erq->flags & IW_ENCODE_NOKEY) || (erq->length == 0)) {
- int j;
- for (j = 0; j < IWM_NUM_KEYS; j++)
- if (iwm->keys[j].in_use) {
- struct iwm_key *k = &iwm->keys[j];
-
- k->in_use = 0;
- ret = iwm_set_key(iwm, remove, 0, k);
- if (ret < 0)
- return ret;
- }
-
- iwm->umac_profile->sec.ucast_cipher =
- UMAC_CIPHER_TYPE_NONE;
- iwm->umac_profile->sec.mcast_cipher =
- UMAC_CIPHER_TYPE_NONE;
- iwm->umac_profile->sec.auth_type =
- UMAC_AUTH_TYPE_OPEN;
-
- return 0;
- } else {
- key->in_use = 0;
- return iwm_set_key(iwm, remove, 0, key);
- }
- }
-
- /*
- * If we havent set a profile yet, we cant set keys.
- * Keys will be pushed after we're associated.
- */
- if (!iwm->umac_profile_active)
- return 0;
-
- /*
- * If there is a current active profile, but no
- * default key, it's not worth trying to associate again.
- */
- if (!iwm->default_key)
- return 0;
-
- /*
- * Here we have an active profile, but a key setting changed.
- * We thus have to invalidate the current profile, and push the
- * new one. Keys will be pushed when association takes place.
- */
- ret = iwm_invalidate_mlme_profile(iwm);
- if (ret < 0) {
- IWM_ERR(iwm, "Couldn't invalidate profile\n");
- return ret;
- }
-
- return iwm_send_mlme_profile(iwm);
-}
-
-static int iwm_wext_giwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *key)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- int idx, i;
-
- idx = erq->flags & IW_ENCODE_INDEX;
- if (idx < 1 || idx > 4) {
- idx = -1;
- if (!iwm->default_key) {
- erq->length = 0;
- erq->flags |= IW_ENCODE_NOKEY;
- return 0;
- } else
- for (i = 0; i < IWM_NUM_KEYS; i++) {
- if (iwm->default_key == &iwm->keys[i]) {
- idx = i;
- break;
- }
- }
- if (idx < 0)
- return -EINVAL;
- } else
- idx--;
-
- erq->flags = idx + 1;
-
- if (!iwm->keys[idx].in_use) {
- erq->length = 0;
- erq->flags |= IW_ENCODE_DISABLED;
- return 0;
- }
-
- memcpy(key, iwm->keys[idx].key,
- min_t(int, erq->length, iwm->keys[idx].key_len));
- erq->length = iwm->keys[idx].key_len;
- erq->flags |= IW_ENCODE_ENABLED;
-
- if (iwm->umac_profile->mode == UMAC_MODE_BSS) {
- switch (iwm->umac_profile->sec.auth_type) {
- case UMAC_AUTH_TYPE_OPEN:
- erq->flags |= IW_ENCODE_OPEN;
- break;
- default:
- erq->flags |= IW_ENCODE_RESTRICTED;
- break;
- }
- }
-
- return 0;
-}
-
-static int iwm_set_wpa_version(struct iwm_priv *iwm, u8 wpa_version)
-{
- if (wpa_version & IW_AUTH_WPA_VERSION_WPA2)
- iwm->umac_profile->sec.flags = UMAC_SEC_FLG_RSNA_ON_MSK;
- else if (wpa_version & IW_AUTH_WPA_VERSION_WPA)
- iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WPA_ON_MSK;
- else
- iwm->umac_profile->sec.flags = UMAC_SEC_FLG_LEGACY_PROFILE;
-
- return 0;
-}
-
-static int iwm_wext_siwpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *wrq, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- u32 power_index;
-
- if (wrq->disabled) {
- power_index = IWM_POWER_INDEX_MIN;
- goto set;
- } else
- power_index = IWM_POWER_INDEX_DEFAULT;
-
- switch (wrq->flags & IW_POWER_MODE) {
- case IW_POWER_ON:
- case IW_POWER_MODE:
- case IW_POWER_ALL_R:
- break;
- default:
- return -EINVAL;
- }
-
- set:
- if (power_index == iwm->conf.power_index)
- return 0;
-
- iwm->conf.power_index = power_index;
-
- return iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
- CFG_POWER_INDEX, iwm->conf.power_index);
-}
-
-static int iwm_wext_giwpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
-
- wrqu->power.disabled = (iwm->conf.power_index == IWM_POWER_INDEX_MIN);
-
- return 0;
-}
-
-static int iwm_set_key_mgt(struct iwm_priv *iwm, u8 key_mgt)
-{
- u8 *auth_type = &iwm->umac_profile->sec.auth_type;
-
- if (key_mgt == IW_AUTH_KEY_MGMT_802_1X)
- *auth_type = UMAC_AUTH_TYPE_8021X;
- else if (key_mgt == IW_AUTH_KEY_MGMT_PSK) {
- if (iwm->umac_profile->sec.flags &
- (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK))
- *auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
- else
- *auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
- } else {
- IWM_ERR(iwm, "Invalid key mgt: 0x%x\n", key_mgt);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int iwm_set_cipher(struct iwm_priv *iwm, u8 cipher, u8 ucast)
-{
- u8 *profile_cipher = ucast ? &iwm->umac_profile->sec.ucast_cipher :
- &iwm->umac_profile->sec.mcast_cipher;
-
- switch (cipher) {
- case IW_AUTH_CIPHER_NONE:
- *profile_cipher = UMAC_CIPHER_TYPE_NONE;
- break;
- case IW_AUTH_CIPHER_WEP40:
- *profile_cipher = UMAC_CIPHER_TYPE_WEP_40;
- break;
- case IW_AUTH_CIPHER_TKIP:
- *profile_cipher = UMAC_CIPHER_TYPE_TKIP;
- break;
- case IW_AUTH_CIPHER_CCMP:
- *profile_cipher = UMAC_CIPHER_TYPE_CCMP;
- break;
- case IW_AUTH_CIPHER_WEP104:
- *profile_cipher = UMAC_CIPHER_TYPE_WEP_104;
- break;
- default:
- IWM_ERR(iwm, "Unsupported cipher: 0x%x\n", cipher);
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
-static int iwm_set_auth_alg(struct iwm_priv *iwm, u8 auth_alg)
-{
- u8 *auth_type = &iwm->umac_profile->sec.auth_type;
-
- switch (auth_alg) {
- case IW_AUTH_ALG_OPEN_SYSTEM:
- *auth_type = UMAC_AUTH_TYPE_OPEN;
- break;
- case IW_AUTH_ALG_SHARED_KEY:
- if (iwm->umac_profile->sec.flags &
- (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK)) {
- if (*auth_type == UMAC_AUTH_TYPE_8021X)
- return -EINVAL;
- *auth_type = UMAC_AUTH_TYPE_RSNA_PSK;
- } else {
- *auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
- }
- break;
- case IW_AUTH_ALG_LEAP:
- default:
- IWM_ERR(iwm, "Unsupported auth alg: 0x%x\n", auth_alg);
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
-static int iwm_wext_siwauth(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *data, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- int ret;
-
- if ((data->flags) &
- (IW_AUTH_WPA_VERSION | IW_AUTH_KEY_MGMT |
- IW_AUTH_WPA_ENABLED | IW_AUTH_80211_AUTH_ALG)) {
- /* We need to invalidate the current profile */
- if (iwm->umac_profile_active) {
- ret = iwm_invalidate_mlme_profile(iwm);
- if (ret < 0) {
- IWM_ERR(iwm, "Couldn't invalidate profile\n");
- return ret;
- }
- }
- }
-
- switch (data->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- return iwm_set_wpa_version(iwm, data->value);
- break;
- case IW_AUTH_CIPHER_PAIRWISE:
- return iwm_set_cipher(iwm, data->value, 1);
- break;
- case IW_AUTH_CIPHER_GROUP:
- return iwm_set_cipher(iwm, data->value, 0);
- break;
- case IW_AUTH_KEY_MGMT:
- return iwm_set_key_mgt(iwm, data->value);
- break;
- case IW_AUTH_80211_AUTH_ALG:
- return iwm_set_auth_alg(iwm, data->value);
- break;
- default:
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
-static int iwm_wext_giwauth(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *data, char *extra)
-{
- return 0;
-}
-
-static int iwm_wext_siwencodeext(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *extra)
-{
- struct iwm_priv *iwm = ndev_to_iwm(dev);
- struct iwm_key *key;
- struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
- int uninitialized_var(alg), idx, i, remove = 0;
-
- IWM_DBG_WEXT(iwm, DBG, "alg: 0x%x\n", ext->alg);
- IWM_DBG_WEXT(iwm, DBG, "key len: %d\n", ext->key_len);
- IWM_DBG_WEXT(iwm, DBG, "ext_flags: 0x%x\n", ext->ext_flags);
- IWM_DBG_WEXT(iwm, DBG, "flags: 0x%x\n", erq->flags);
- IWM_DBG_WEXT(iwm, DBG, "length: 0x%x\n", erq->length);
-
- switch (ext->alg) {
- case IW_ENCODE_ALG_NONE:
- remove = 1;
- break;
- case IW_ENCODE_ALG_WEP:
- if (ext->key_len == WLAN_KEY_LEN_WEP40)
- alg = UMAC_CIPHER_TYPE_WEP_40;
- else if (ext->key_len == WLAN_KEY_LEN_WEP104)
- alg = UMAC_CIPHER_TYPE_WEP_104;
- else {
- IWM_ERR(iwm, "Invalid key length: %d\n", ext->key_len);
- return -EINVAL;
- }
-
- break;
- case IW_ENCODE_ALG_TKIP:
- alg = UMAC_CIPHER_TYPE_TKIP;
- break;
- case IW_ENCODE_ALG_CCMP:
- alg = UMAC_CIPHER_TYPE_CCMP;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- idx = erq->flags & IW_ENCODE_INDEX;
-
- if (idx == 0) {
- if (iwm->default_key)
- for (i = 0; i < IWM_NUM_KEYS; i++) {
- if (iwm->default_key == &iwm->keys[i]) {
- idx = i;
- break;
- }
- }
- } else if (idx < 1 || idx > 4) {
- return -EINVAL;
- } else
- idx--;
-
- if (erq->flags & IW_ENCODE_DISABLED)
- remove = 1;
- else if ((erq->length == 0) ||
- (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) {
- iwm->default_key = &iwm->keys[idx];
- if (iwm->umac_profile_active && ext->alg == IW_ENCODE_ALG_WEP)
- return iwm_set_tx_key(iwm, idx);
- }
-
- key = iwm_key_init(iwm, idx, !remove, ext, alg);
-
- return iwm_set_key(iwm, remove, !iwm->default_key, key);
-}
-
-static const iw_handler iwm_handlers[] =
-{
- (iw_handler) NULL, /* SIOCSIWCOMMIT */
- (iw_handler) cfg80211_wext_giwname, /* SIOCGIWNAME */
- (iw_handler) NULL, /* SIOCSIWNWID */
- (iw_handler) NULL, /* SIOCGIWNWID */
- (iw_handler) iwm_wext_siwfreq, /* SIOCSIWFREQ */
- (iw_handler) iwm_wext_giwfreq, /* SIOCGIWFREQ */
- (iw_handler) cfg80211_wext_siwmode, /* SIOCSIWMODE */
- (iw_handler) cfg80211_wext_giwmode, /* SIOCGIWMODE */
- (iw_handler) NULL, /* SIOCSIWSENS */
- (iw_handler) NULL, /* SIOCGIWSENS */
- (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */
- (iw_handler) cfg80211_wext_giwrange, /* SIOCGIWRANGE */
- (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */
- (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */
- (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */
- (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */
- (iw_handler) NULL, /* SIOCSIWSPY */
- (iw_handler) NULL, /* SIOCGIWSPY */
- (iw_handler) NULL, /* SIOCSIWTHRSPY */
- (iw_handler) NULL, /* SIOCGIWTHRSPY */
- (iw_handler) iwm_wext_siwap, /* SIOCSIWAP */
- (iw_handler) iwm_wext_giwap, /* SIOCGIWAP */
- (iw_handler) NULL, /* SIOCSIWMLME */
- (iw_handler) NULL, /* SIOCGIWAPLIST */
- (iw_handler) cfg80211_wext_siwscan, /* SIOCSIWSCAN */
- (iw_handler) cfg80211_wext_giwscan, /* SIOCGIWSCAN */
- (iw_handler) iwm_wext_siwessid, /* SIOCSIWESSID */
- (iw_handler) iwm_wext_giwessid, /* SIOCGIWESSID */
- (iw_handler) NULL, /* SIOCSIWNICKN */
- (iw_handler) NULL, /* SIOCGIWNICKN */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCSIWRATE */
- (iw_handler) iwm_wext_giwrate, /* SIOCGIWRATE */
- (iw_handler) cfg80211_wext_siwrts, /* SIOCSIWRTS */
- (iw_handler) cfg80211_wext_giwrts, /* SIOCGIWRTS */
- (iw_handler) cfg80211_wext_siwfrag, /* SIOCSIWFRAG */
- (iw_handler) cfg80211_wext_giwfrag, /* SIOCGIWFRAG */
- (iw_handler) NULL, /* SIOCSIWTXPOW */
- (iw_handler) NULL, /* SIOCGIWTXPOW */
- (iw_handler) NULL, /* SIOCSIWRETRY */
- (iw_handler) NULL, /* SIOCGIWRETRY */
- (iw_handler) iwm_wext_siwencode, /* SIOCSIWENCODE */
- (iw_handler) iwm_wext_giwencode, /* SIOCGIWENCODE */
- (iw_handler) iwm_wext_siwpower, /* SIOCSIWPOWER */
- (iw_handler) iwm_wext_giwpower, /* SIOCGIWPOWER */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCSIWGENIE */
- (iw_handler) NULL, /* SIOCGIWGENIE */
- (iw_handler) iwm_wext_siwauth, /* SIOCSIWAUTH */
- (iw_handler) iwm_wext_giwauth, /* SIOCGIWAUTH */
- (iw_handler) iwm_wext_siwencodeext, /* SIOCSIWENCODEEXT */
- (iw_handler) NULL, /* SIOCGIWENCODEEXT */
- (iw_handler) NULL, /* SIOCSIWPMKSA */
- (iw_handler) NULL, /* -- hole -- */
-};
-
-const struct iw_handler_def iwm_iw_handler_def = {
- .num_standard = ARRAY_SIZE(iwm_handlers),
- .standard = (iw_handler *) iwm_handlers,
- .get_wireless_stats = iwm_get_wireless_stats,
-};
-
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index b9b3741..dd87326 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -34,7 +34,8 @@
*
* @param priv A pointer to struct lbs_private structure
* @param rates the buffer which keeps input and output
- * @param rates_size the size of rate1 buffer; new size of buffer on return
+ * @param rates_size the size of rates buffer; new size of buffer on return,
+ * which will be less than or equal to original rates_size
*
* @return 0 on success, or -1 on error
*/
@@ -42,42 +43,42 @@
u8 *rates,
u16 *rates_size)
{
- u8 *card_rates = lbs_bg_rates;
- size_t num_card_rates = sizeof(lbs_bg_rates);
- int ret = 0, i, j;
- u8 tmp[30];
- size_t tmp_size = 0;
+ int i, j;
+ u8 intersection[MAX_RATES];
+ u16 intersection_size;
+ u16 num_rates = 0;
- /* For each rate in card_rates that exists in rate1, copy to tmp */
- for (i = 0; card_rates[i] && (i < num_card_rates); i++) {
- for (j = 0; rates[j] && (j < *rates_size); j++) {
- if (rates[j] == card_rates[i])
- tmp[tmp_size++] = card_rates[i];
+ intersection_size = min_t(u16, *rates_size, ARRAY_SIZE(intersection));
+
+ /* Allow each rate from 'rates' that is supported by the hardware */
+ for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && lbs_bg_rates[i]; i++) {
+ for (j = 0; j < intersection_size && rates[j]; j++) {
+ if (rates[j] == lbs_bg_rates[i])
+ intersection[num_rates++] = rates[j];
}
}
lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size);
- lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates);
- lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
+ lbs_deb_hex(LBS_DEB_JOIN, "card rates ", lbs_bg_rates,
+ ARRAY_SIZE(lbs_bg_rates));
+ lbs_deb_hex(LBS_DEB_JOIN, "common rates", intersection, num_rates);
lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
if (!priv->enablehwauto) {
- for (i = 0; i < tmp_size; i++) {
- if (tmp[i] == priv->cur_rate)
+ for (i = 0; i < num_rates; i++) {
+ if (intersection[i] == priv->cur_rate)
goto done;
}
lbs_pr_alert("Previously set fixed data rate %#x isn't "
"compatible with the network.\n", priv->cur_rate);
- ret = -1;
- goto done;
+ return -1;
}
- ret = 0;
done:
memset(rates, 0, *rates_size);
- *rates_size = min_t(int, tmp_size, *rates_size);
- memcpy(rates, tmp, *rates_size);
- return ret;
+ *rates_size = num_rates;
+ memcpy(rates, intersection, num_rates);
+ return 0;
}
@@ -129,7 +130,6 @@
{
struct cmd_ds_802_11_authenticate cmd;
int ret = -1;
- DECLARE_MAC_BUF(mac);
lbs_deb_enter(LBS_DEB_JOIN);
@@ -138,8 +138,7 @@
cmd.authtype = iw_auth_to_ieee_auth(auth);
- lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n",
- print_mac(mac, bssid), cmd.authtype);
+ lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n", bssid, cmd.authtype);
ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd);
@@ -321,8 +320,8 @@
rates = (struct mrvl_ie_rates_param_set *) pos;
rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
- memcpy(&rates->rates, &bss->rates, MAX_RATES);
- tmplen = MAX_RATES;
+ tmplen = min_t(u16, ARRAY_SIZE(bss->rates), MAX_RATES);
+ memcpy(&rates->rates, &bss->rates, tmplen);
if (get_common_rates(priv, rates->rates, &tmplen)) {
ret = -1;
goto done;
@@ -342,8 +341,6 @@
/* Firmware v9+ indicate authentication suites as a TLV */
if (priv->fwrelease >= 0x09000000) {
- DECLARE_MAC_BUF(mac);
-
auth = (struct mrvl_ie_auth_type *) pos;
auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE);
auth->header.len = cpu_to_le16(2);
@@ -351,8 +348,8 @@
auth->auth = cpu_to_le16(tmpauth);
pos += sizeof(auth->header) + 2;
- lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n",
- print_mac(mac, bss->bssid), priv->secinfo.auth_mode);
+ lbs_deb_join("AUTH_CMD: BSSID %pM, auth 0x%x\n",
+ bss->bssid, priv->secinfo.auth_mode);
}
/* WPA/WPA2 IEs */
@@ -598,7 +595,7 @@
/* Copy Data rates from the rates recorded in scan response */
memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates));
- ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES);
+ ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), ARRAY_SIZE (bss->rates));
memcpy(cmd.bss.rates, bss->rates, ratesize);
if (get_common_rates(priv, cmd.bss.rates, &ratesize)) {
lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n");
@@ -1368,11 +1365,17 @@
if (ret)
goto out;
+ memcpy(&priv->wpa_unicast_key, &assoc_req->wpa_unicast_key,
+ sizeof(struct enc_key));
+
if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)) {
clear_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags);
ret = lbs_cmd_802_11_key_material(priv, CMD_ACT_SET, assoc_req);
assoc_req->flags = flags;
+
+ memcpy(&priv->wpa_mcast_key, &assoc_req->wpa_mcast_key,
+ sizeof(struct enc_key));
}
out:
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 811ffc3..893a55c 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -45,6 +45,8 @@
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
ssize_t res;
+ if (!buf)
+ return -ENOMEM;
pos += snprintf(buf+pos, len-pos, "state = %s\n",
szStates[priv->connect_status]);
@@ -68,6 +70,8 @@
char *buf = (char *)addr;
DECLARE_SSID_BUF(ssid);
struct bss_descriptor * iter_bss;
+ if (!buf)
+ return -ENOMEM;
pos += snprintf(buf+pos, len-pos,
"# | ch | rssi | bssid | cap | Qual | SSID \n");
@@ -110,6 +114,8 @@
int p1, p2, p3, p4, p5, p6;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, user_buf, buf_size)) {
@@ -148,6 +154,8 @@
struct sleep_params sp;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
ret = lbs_cmd_802_11_sleep_params(priv, CMD_ACT_GET, &sp);
if (ret)
@@ -433,6 +441,8 @@
int ret;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
offval.offset = priv->mac_offset;
offval.value = 0;
@@ -457,6 +467,8 @@
ssize_t res, buf_size;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, userbuf, buf_size)) {
@@ -481,6 +493,8 @@
struct lbs_offset_value offval;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, userbuf, buf_size)) {
@@ -515,6 +529,8 @@
int ret;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
offval.offset = priv->bbp_offset;
offval.value = 0;
@@ -540,6 +556,8 @@
ssize_t res, buf_size;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, userbuf, buf_size)) {
@@ -564,6 +582,8 @@
struct lbs_offset_value offval;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, userbuf, buf_size)) {
@@ -598,6 +618,8 @@
int ret;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
offval.offset = priv->rf_offset;
offval.value = 0;
@@ -623,6 +645,8 @@
ssize_t res, buf_size;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, userbuf, buf_size)) {
@@ -647,6 +671,8 @@
struct lbs_offset_value offval;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
buf_size = min(count, len - 1);
if (copy_from_user(buf, userbuf, buf_size)) {
@@ -853,6 +879,8 @@
struct debug_data *d;
unsigned long addr = get_zeroed_page(GFP_KERNEL);
char *buf = (char *)addr;
+ if (!buf)
+ return -ENOMEM;
p = buf;
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index 0b84bdc..8b15380 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -6,7 +6,7 @@
#ifndef _LBS_DECL_H_
#define _LBS_DECL_H_
-#include <linux/device.h>
+#include <linux/netdevice.h>
#include "defs.h"
@@ -41,7 +41,8 @@
int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len);
void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
int result);
-int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *);
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index f9ec69e..d3b69a4 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -14,7 +14,7 @@
#include "defs.h"
#include "hostcmd.h"
-extern struct ethtool_ops lbs_ethtool_ops;
+extern const struct ethtool_ops lbs_ethtool_ops;
#define MAX_BSSID_PER_CHANNEL 16
@@ -260,7 +260,6 @@
u16 psmode; /* Wlan802_11PowermodeCAM=disable
Wlan802_11PowermodeMAX_PSP=enable */
u32 psstate;
- char ps_supported;
u8 needtowakeup;
struct assoc_request * pending_assoc_req;
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index b118a35..039b555 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -183,7 +183,7 @@
return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL);
}
-struct ethtool_ops lbs_ethtool_ops = {
+const struct ethtool_ops lbs_ethtool_ops = {
.get_drvinfo = lbs_ethtool_get_drvinfo,
.get_eeprom = lbs_ethtool_get_eeprom,
.get_eeprom_len = lbs_ethtool_get_eeprom_len,
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 2a5b083..6238176 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -59,6 +59,7 @@
struct pcmcia_device *p_dev;
struct lbs_private *priv;
void __iomem *iobase;
+ bool align_regs;
};
@@ -274,16 +275,25 @@
#define IF_CS_PRODUCT_ID 0x0000001C
#define IF_CS_CF8385_B1_REV 0x12
#define IF_CS_CF8381_B3_REV 0x04
+#define IF_CS_CF8305_B1_REV 0x03
/*
* Used to detect other cards than CF8385 since their revisions of silicon
* doesn't match those from CF8385, eg. CF8381 B3 works with this driver.
*/
+#define CF8305_MANFID 0x02db
+#define CF8305_CARDID 0x8103
#define CF8381_MANFID 0x02db
#define CF8381_CARDID 0x6064
#define CF8385_MANFID 0x02df
#define CF8385_CARDID 0x8103
+static inline int if_cs_hw_is_cf8305(struct pcmcia_device *p_dev)
+{
+ return (p_dev->manf_id == CF8305_MANFID &&
+ p_dev->card_id == CF8305_CARDID);
+}
+
static inline int if_cs_hw_is_cf8381(struct pcmcia_device *p_dev)
{
return (p_dev->manf_id == CF8381_MANFID &&
@@ -556,7 +566,15 @@
lbs_deb_enter(LBS_DEB_CS);
- scratch = if_cs_read8(card, IF_CS_SCRATCH);
+ /*
+ * This is the only place where an unaligned register access happens on
+ * the CF8305 card, therefore for the sake of speed of the driver, we do
+ * the alignment correction here.
+ */
+ if (card->align_regs)
+ scratch = if_cs_read16(card, IF_CS_SCRATCH) >> 8;
+ else
+ scratch = if_cs_read8(card, IF_CS_SCRATCH);
/* "If the value is 0x5a, the firmware is already
* downloaded successfully"
@@ -880,8 +898,24 @@
p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+ /*
+ * Most of the libertas cards can do unaligned register access, but some
+ * weird ones can not. That's especially true for the CF8305 card.
+ */
+ card->align_regs = 0;
+
/* Check if we have a current silicon */
prod_id = if_cs_read8(card, IF_CS_PRODUCT_ID);
+ if (if_cs_hw_is_cf8305(p_dev)) {
+ card->align_regs = 1;
+ if (prod_id < IF_CS_CF8305_B1_REV) {
+ lbs_pr_err("old chips like 8305 rev B3 "
+ "aren't supported\n");
+ ret = -ENODEV;
+ goto out2;
+ }
+ }
+
if (if_cs_hw_is_cf8381(p_dev) && prod_id < IF_CS_CF8381_B3_REV) {
lbs_pr_err("old chips like 8381 rev B3 aren't supported\n");
ret = -ENODEV;
@@ -896,7 +930,7 @@
/* Load the firmware early, before calling into libertas.ko */
ret = if_cs_prog_helper(card);
- if (ret == 0)
+ if (ret == 0 && !if_cs_hw_is_cf8305(p_dev))
ret = if_cs_prog_real(card);
if (ret)
goto out2;
@@ -933,9 +967,6 @@
goto out3;
}
- /* The firmware for the CF card supports powersave */
- priv->ps_supported = 1;
-
ret = 0;
goto out;
@@ -979,6 +1010,7 @@
/********************************************************************/
static struct pcmcia_device_id if_cs_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(CF8305_MANFID, CF8305_CARDID),
PCMCIA_DEVICE_MANF_CARD(CF8381_MANFID, CF8381_CARDID),
PCMCIA_DEVICE_MANF_CARD(CF8385_MANFID, CF8385_CARDID),
PCMCIA_DEVICE_NULL,
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 8cdb88c..485a8d40 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1039,9 +1039,6 @@
if (ret)
goto err_activate_card;
- if (priv->fwcapinfo & FW_CAPINFO_PS)
- priv->ps_supported = 1;
-
out:
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
@@ -1096,11 +1093,11 @@
lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
}
- card->priv->surpriseremoved = 1;
lbs_deb_sdio("call remove card\n");
lbs_stop_card(card->priv);
lbs_remove_card(card->priv);
+ card->priv->surpriseremoved = 1;
flush_workqueue(card->workqueue);
destroy_workqueue(card->workqueue);
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 6564282..446e327 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -376,7 +376,7 @@
err = spu_read_u16(card, IF_SPI_SPU_BUS_MODE_REG, &rval);
if (err)
return err;
- if (rval != mode) {
+ if ((rval & 0xF) != mode) {
lbs_pr_err("Can't read bus mode register.\n");
return -EIO;
}
@@ -737,7 +737,7 @@
goto out;
} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
lbs_pr_err("%s: error: card has %d bytes of data, but "
- "our maximum skb size is %lu\n",
+ "our maximum skb size is %zu\n",
__func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
err = -EINVAL;
goto out;
@@ -1118,7 +1118,6 @@
priv->card = card;
priv->hw_host_to_card = if_spi_host_to_card;
priv->fw_ready = 1;
- priv->ps_supported = 1;
/* Initialize interrupt handling stuff. */
card->run_thread = 1;
@@ -1171,12 +1170,13 @@
lbs_deb_spi("libertas_spi_remove\n");
lbs_deb_enter(LBS_DEB_SPI);
- priv->surpriseremoved = 1;
lbs_stop_card(priv);
+ lbs_remove_card(priv); /* will call free_netdev */
+
+ priv->surpriseremoved = 1;
free_irq(spi->irq, card);
if_spi_terminate_spi_thread(card);
- lbs_remove_card(priv); /* will call free_netdev */
if (card->pdata->teardown)
card->pdata->teardown(spi);
free_if_spi_card(card);
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 1844c5a..92bc8c5 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -181,13 +181,14 @@
wake_method.action = cpu_to_le16(CMD_ACT_GET);
if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
lbs_pr_info("Firmware does not seem to support PS mode\n");
+ priv->fwcapinfo &= ~FW_CAPINFO_PS;
} else {
if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
lbs_deb_usb("Firmware seems to support PS with wake-via-command\n");
- priv->ps_supported = 1;
} else {
/* The versions which boot up this way don't seem to
work even if we set it to the command interrupt */
+ priv->fwcapinfo &= ~FW_CAPINFO_PS;
lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
}
}
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 89575e4..87b4e49 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1176,7 +1176,7 @@
/* Allocate an Ethernet device and register it */
dev = alloc_etherdev(sizeof(struct lbs_private));
if (!dev) {
- lbs_pr_err("init ethX device failed\n");
+ lbs_pr_err("init wlanX device failed\n");
goto done;
}
priv = netdev_priv(dev);
@@ -1204,6 +1204,7 @@
SET_NETDEV_DEV(dev, dmdev);
priv->rtap_net_dev = NULL;
+ strcpy(dev->name, "wlan%d");
lbs_deb_thread("Starting main thread...\n");
init_waitqueue_head(&priv->waitq);
@@ -1646,7 +1647,8 @@
return 0;
}
-static int lbs_rtap_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lbs_rtap_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
netif_stop_queue(dev);
return NETDEV_TX_BUSY;
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 160cfd8..4c018f7 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -57,19 +57,17 @@
* @param skb A pointer to skb which includes TX packet
* @return 0 or -1
*/
-int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
struct lbs_private *priv = dev->ml_priv;
struct txpd *txpd;
char *p802x_hdr;
uint16_t pkt_len;
- int ret;
+ netdev_tx_t ret = NETDEV_TX_OK;
lbs_deb_enter(LBS_DEB_TX);
- ret = NETDEV_TX_OK;
-
/* We need to protect against the queues being restarted before
we get round to stopping them */
spin_lock_irqsave(&priv->driver_lock, flags);
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index 8bc19074..be837a0d25 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -712,7 +712,7 @@
lbs_deb_enter(LBS_DEB_WEXT);
- if (!priv->ps_supported) {
+ if (!(priv->fwcapinfo & FW_CAPINFO_PS)) {
if (vwrq->disabled)
return 0;
else
@@ -1728,6 +1728,8 @@
}
switch (dwrq->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_PRIVACY_INVOKED:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
case IW_AUTH_TKIP_COUNTERMEASURES:
case IW_AUTH_CIPHER_PAIRWISE:
case IW_AUTH_CIPHER_GROUP:
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 10a99e2..019431d 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -366,15 +366,35 @@
return 0;
}
+static u64 lbtf_op_prepare_multicast(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mclist)
+{
+ struct lbtf_private *priv = hw->priv;
+ int i;
+
+ if (!mc_count || mc_count > MRVDRV_MAX_MULTICAST_LIST_SIZE)
+ return mc_count;
+
+ priv->nr_of_multicastmacaddr = mc_count;
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ memcpy(&priv->multicastlist[i], mclist->da_addr,
+ ETH_ALEN);
+ mclist = mclist->next;
+ }
+
+ return mc_count;
+}
+
#define SUPPORTED_FIF_FLAGS (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)
static void lbtf_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags,
- int mc_count, struct dev_mc_list *mclist)
+ u64 multicast)
{
struct lbtf_private *priv = hw->priv;
int old_mac_control = priv->mac_control;
- int i;
changed_flags &= SUPPORTED_FIF_FLAGS;
*new_flags &= SUPPORTED_FIF_FLAGS;
@@ -386,20 +406,12 @@
else
priv->mac_control &= ~CMD_ACT_MAC_PROMISCUOUS_ENABLE;
if (*new_flags & (FIF_ALLMULTI) ||
- mc_count > MRVDRV_MAX_MULTICAST_LIST_SIZE) {
+ multicast > MRVDRV_MAX_MULTICAST_LIST_SIZE) {
priv->mac_control |= CMD_ACT_MAC_ALL_MULTICAST_ENABLE;
priv->mac_control &= ~CMD_ACT_MAC_MULTICAST_ENABLE;
- } else if (mc_count) {
+ } else if (multicast) {
priv->mac_control |= CMD_ACT_MAC_MULTICAST_ENABLE;
priv->mac_control &= ~CMD_ACT_MAC_ALL_MULTICAST_ENABLE;
- priv->nr_of_multicastmacaddr = mc_count;
- for (i = 0; i < mc_count; i++) {
- if (!mclist)
- break;
- memcpy(&priv->multicastlist[i], mclist->da_addr,
- ETH_ALEN);
- mclist = mclist->next;
- }
lbtf_cmd_set_mac_multicast_addr(priv);
} else {
priv->mac_control &= ~(CMD_ACT_MAC_MULTICAST_ENABLE |
@@ -461,6 +473,7 @@
.add_interface = lbtf_op_add_interface,
.remove_interface = lbtf_op_remove_interface,
.config = lbtf_op_config,
+ .prepare_multicast = lbtf_op_prepare_multicast,
.configure_filter = lbtf_op_configure_filter,
.bss_info_changed = lbtf_op_bss_info_changed,
};
@@ -503,7 +516,8 @@
skb_reserve(skb, 2);
}
- ieee80211_rx_irqsafe(priv->hw, skb, &stats);
+ memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
+ ieee80211_rx_irqsafe(priv->hw, skb);
return 0;
}
EXPORT_SYMBOL_GPL(lbtf_rx);
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 7916ca3..896f532 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -15,6 +15,8 @@
#include <linux/list.h>
#include <linux/spinlock.h>
+#include <net/dst.h>
+#include <net/xfrm.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include <linux/if_arp.h>
@@ -310,11 +312,12 @@
} __attribute__ ((packed));
-static int hwsim_mon_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hwsim_mon_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
/* TODO: allow packet injection */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
@@ -404,11 +407,19 @@
rx_status.freq = data->channel->center_freq;
rx_status.band = data->channel->band;
rx_status.rate_idx = info->control.rates[0].idx;
- /* TODO: simulate signal strength (and optional packet drop) */
+ /* TODO: simulate real signal strength (and optional packet loss) */
+ rx_status.signal = -50;
if (data->ps != PS_DISABLED)
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+ /* release the skb's source info */
+ skb_orphan(skb);
+ skb_dst_drop(skb);
+ skb->mark = 0;
+ secpath_reset(skb);
+ nf_reset(skb);
+
/* Copy skb to all enabled radios that are on the current frequency */
spin_lock(&hwsim_radio_lock);
list_for_each_entry(data2, &hwsim_radios, list) {
@@ -430,7 +441,8 @@
if (memcmp(hdr->addr1, data2->hw->wiphy->perm_addr,
ETH_ALEN) == 0)
ack = true;
- ieee80211_rx_irqsafe(data2->hw, nskb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(data2->hw, nskb);
}
spin_unlock(&hwsim_radio_lock);
@@ -571,9 +583,7 @@
static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count,
- struct dev_addr_list *mc_list)
+ unsigned int *total_flags,u64 multicast)
{
struct mac80211_hwsim_data *data = hw->priv;
@@ -690,6 +700,74 @@
return 0;
}
+#ifdef CONFIG_NL80211_TESTMODE
+/*
+ * This section contains example code for using netlink
+ * attributes with the testmode command in nl80211.
+ */
+
+/* These enums need to be kept in sync with userspace */
+enum hwsim_testmode_attr {
+ __HWSIM_TM_ATTR_INVALID = 0,
+ HWSIM_TM_ATTR_CMD = 1,
+ HWSIM_TM_ATTR_PS = 2,
+
+ /* keep last */
+ __HWSIM_TM_ATTR_AFTER_LAST,
+ HWSIM_TM_ATTR_MAX = __HWSIM_TM_ATTR_AFTER_LAST - 1
+};
+
+enum hwsim_testmode_cmd {
+ HWSIM_TM_CMD_SET_PS = 0,
+ HWSIM_TM_CMD_GET_PS = 1,
+};
+
+static const struct nla_policy hwsim_testmode_policy[HWSIM_TM_ATTR_MAX + 1] = {
+ [HWSIM_TM_ATTR_CMD] = { .type = NLA_U32 },
+ [HWSIM_TM_ATTR_PS] = { .type = NLA_U32 },
+};
+
+static int hwsim_fops_ps_write(void *dat, u64 val);
+
+static int mac80211_hwsim_testmode_cmd(struct ieee80211_hw *hw,
+ void *data, int len)
+{
+ struct mac80211_hwsim_data *hwsim = hw->priv;
+ struct nlattr *tb[HWSIM_TM_ATTR_MAX + 1];
+ struct sk_buff *skb;
+ int err, ps;
+
+ err = nla_parse(tb, HWSIM_TM_ATTR_MAX, data, len,
+ hwsim_testmode_policy);
+ if (err)
+ return err;
+
+ if (!tb[HWSIM_TM_ATTR_CMD])
+ return -EINVAL;
+
+ switch (nla_get_u32(tb[HWSIM_TM_ATTR_CMD])) {
+ case HWSIM_TM_CMD_SET_PS:
+ if (!tb[HWSIM_TM_ATTR_PS])
+ return -EINVAL;
+ ps = nla_get_u32(tb[HWSIM_TM_ATTR_PS]);
+ return hwsim_fops_ps_write(hwsim, ps);
+ case HWSIM_TM_CMD_GET_PS:
+ skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
+ nla_total_size(sizeof(u32)));
+ if (!skb)
+ return -ENOMEM;
+ NLA_PUT_U32(skb, HWSIM_TM_ATTR_PS, hwsim->ps);
+ return cfg80211_testmode_reply(skb);
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ nla_put_failure:
+ kfree_skb(skb);
+ return -ENOBUFS;
+}
+#endif
+
static const struct ieee80211_ops mac80211_hwsim_ops =
{
.tx = mac80211_hwsim_tx,
@@ -703,6 +781,7 @@
.sta_notify = mac80211_hwsim_sta_notify,
.set_tim = mac80211_hwsim_set_tim,
.conf_tx = mac80211_hwsim_conf_tx,
+ CFG80211_TESTMODE_CMD(mac80211_hwsim_testmode_cmd)
};
@@ -757,7 +836,6 @@
{
struct mac80211_hwsim_data *data = dat;
struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
- DECLARE_MAC_BUF(buf);
struct sk_buff *skb;
struct ieee80211_pspoll *pspoll;
@@ -787,7 +865,6 @@
struct ieee80211_vif *vif, int ps)
{
struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
- DECLARE_MAC_BUF(buf);
struct sk_buff *skb;
struct ieee80211_hdr *hdr;
@@ -945,7 +1022,8 @@
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT);
- hw->flags = IEEE80211_HW_MFP_CAPABLE;
+ hw->flags = IEEE80211_HW_MFP_CAPABLE |
+ IEEE80211_HW_SIGNAL_DBM;
/* ask mac80211 to reserve space for magic */
hw->vif_data_size = sizeof(struct hwsim_vif_priv);
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 83967af..746532e 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1,7 +1,8 @@
/*
- * drivers/net/wireless/mwl8k.c driver for Marvell TOPDOG 802.11 Wireless cards
+ * drivers/net/wireless/mwl8k.c
+ * Driver for Marvell TOPDOG 802.11 Wireless cards
*
- * Copyright (C) 2008 Marvell Semiconductor Inc.
+ * Copyright (C) 2008-2009 Marvell Semiconductor Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
@@ -24,7 +25,7 @@
#define MWL8K_DESC "Marvell TOPDOG(R) 802.11 Wireless Network Driver"
#define MWL8K_NAME KBUILD_MODNAME
-#define MWL8K_VERSION "0.9.1"
+#define MWL8K_VERSION "0.10"
MODULE_DESCRIPTION(MWL8K_DESC);
MODULE_VERSION(MWL8K_VERSION);
@@ -38,16 +39,14 @@
};
MODULE_DEVICE_TABLE(pci, mwl8k_table);
-#define IEEE80211_ADDR_LEN ETH_ALEN
-
/* Register definitions */
#define MWL8K_HIU_GEN_PTR 0x00000c10
-#define MWL8K_MODE_STA 0x0000005a
-#define MWL8K_MODE_AP 0x000000a5
+#define MWL8K_MODE_STA 0x0000005a
+#define MWL8K_MODE_AP 0x000000a5
#define MWL8K_HIU_INT_CODE 0x00000c14
-#define MWL8K_FWSTA_READY 0xf0f1f2f4
-#define MWL8K_FWAP_READY 0xf1f2f4a5
-#define MWL8K_INT_CODE_CMD_FINISHED 0x00000005
+#define MWL8K_FWSTA_READY 0xf0f1f2f4
+#define MWL8K_FWAP_READY 0xf1f2f4a5
+#define MWL8K_INT_CODE_CMD_FINISHED 0x00000005
#define MWL8K_HIU_SCRATCH 0x00000c40
/* Host->device communications */
@@ -56,11 +55,10 @@
#define MWL8K_HIU_H2A_INTERRUPT_MASK 0x00000c20
#define MWL8K_HIU_H2A_INTERRUPT_CLEAR_SEL 0x00000c24
#define MWL8K_HIU_H2A_INTERRUPT_STATUS_MASK 0x00000c28
-#define MWL8K_H2A_INT_DUMMY (1 << 20)
-#define MWL8K_H2A_INT_RESET (1 << 15)
-#define MWL8K_H2A_INT_PS (1 << 2)
-#define MWL8K_H2A_INT_DOORBELL (1 << 1)
-#define MWL8K_H2A_INT_PPA_READY (1 << 0)
+#define MWL8K_H2A_INT_DUMMY (1 << 20)
+#define MWL8K_H2A_INT_RESET (1 << 15)
+#define MWL8K_H2A_INT_DOORBELL (1 << 1)
+#define MWL8K_H2A_INT_PPA_READY (1 << 0)
/* Device->host communications */
#define MWL8K_HIU_A2H_INTERRUPT_EVENTS 0x00000c2c
@@ -68,16 +66,16 @@
#define MWL8K_HIU_A2H_INTERRUPT_MASK 0x00000c34
#define MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL 0x00000c38
#define MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK 0x00000c3c
-#define MWL8K_A2H_INT_DUMMY (1 << 20)
-#define MWL8K_A2H_INT_CHNL_SWITCHED (1 << 11)
-#define MWL8K_A2H_INT_QUEUE_EMPTY (1 << 10)
-#define MWL8K_A2H_INT_RADAR_DETECT (1 << 7)
-#define MWL8K_A2H_INT_RADIO_ON (1 << 6)
-#define MWL8K_A2H_INT_RADIO_OFF (1 << 5)
-#define MWL8K_A2H_INT_MAC_EVENT (1 << 3)
-#define MWL8K_A2H_INT_OPC_DONE (1 << 2)
-#define MWL8K_A2H_INT_RX_READY (1 << 1)
-#define MWL8K_A2H_INT_TX_DONE (1 << 0)
+#define MWL8K_A2H_INT_DUMMY (1 << 20)
+#define MWL8K_A2H_INT_CHNL_SWITCHED (1 << 11)
+#define MWL8K_A2H_INT_QUEUE_EMPTY (1 << 10)
+#define MWL8K_A2H_INT_RADAR_DETECT (1 << 7)
+#define MWL8K_A2H_INT_RADIO_ON (1 << 6)
+#define MWL8K_A2H_INT_RADIO_OFF (1 << 5)
+#define MWL8K_A2H_INT_MAC_EVENT (1 << 3)
+#define MWL8K_A2H_INT_OPC_DONE (1 << 2)
+#define MWL8K_A2H_INT_RX_READY (1 << 1)
+#define MWL8K_A2H_INT_TX_DONE (1 << 0)
#define MWL8K_A2H_EVENTS (MWL8K_A2H_INT_DUMMY | \
MWL8K_A2H_INT_CHNL_SWITCHED | \
@@ -113,17 +111,6 @@
struct sk_buff **rx_skb;
};
-struct mwl8k_skb {
- /*
- * The DMA engine requires a modification to the payload.
- * If the skbuff is shared/cloned, it needs to be unshared.
- * This method is used to ensure the stack always gets back
- * the skbuff it sent for transmission.
- */
- struct sk_buff *clone;
- struct sk_buff *skb;
-};
-
struct mwl8k_tx_queue {
/* hw transmits here */
int tx_head;
@@ -134,7 +121,7 @@
struct ieee80211_tx_queue_stats tx_stats;
struct mwl8k_tx_desc *tx_desc_area;
dma_addr_t tx_desc_dma;
- struct mwl8k_skb *tx_skb;
+ struct sk_buff **tx_skb;
};
/* Pointers to the firmware data and meta information about it. */
@@ -152,19 +139,22 @@
struct pci_dev *pdev;
u8 name[16];
- /* firmware access lock */
- spinlock_t fw_lock;
/* firmware files and meta data */
struct mwl8k_firmware fw;
u32 part_num;
+ /* firmware access */
+ struct mutex fw_mutex;
+ struct task_struct *fw_mutex_owner;
+ int fw_mutex_depth;
+ struct completion *tx_wait;
+ struct completion *hostcmd_wait;
+
/* lock held over TX and TX reap */
spinlock_t tx_lock;
- u32 int_mask;
struct ieee80211_vif *vif;
- struct list_head vif_list;
struct ieee80211_channel *current_channel;
@@ -173,10 +163,8 @@
dma_addr_t cookie_dma;
u16 num_mcaddrs;
- u16 region_code;
u8 hw_rev;
- __le32 fw_rev;
- u32 wep_enabled;
+ u32 fw_rev;
/*
* Running count of TX packets in flight, to avoid
@@ -192,19 +180,13 @@
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
- /* RF preamble: Short, Long or Auto */
- u8 radio_preamble;
- u8 radio_state;
-
- /* WMM MODE 1 for enabled; 0 for disabled */
- bool wmm_mode;
-
- /* Set if PHY config is in progress */
- bool inconfig;
+ bool radio_on;
+ bool radio_short_preamble;
+ bool wmm_enabled;
/* XXX need to convert this to handle multiple interfaces */
bool capture_beacon;
- u8 capture_bssid[IEEE80211_ADDR_LEN];
+ u8 capture_bssid[ETH_ALEN];
struct sk_buff *beacon_skb;
/*
@@ -220,14 +202,10 @@
/* Work thread to serialize configuration requests */
struct workqueue_struct *config_wq;
- struct completion *hostcmd_wait;
- struct completion *tx_wait;
};
/* Per interface specific private data */
struct mwl8k_vif {
- struct list_head node;
-
/* backpointer to parent config block */
struct mwl8k_priv *priv;
@@ -235,8 +213,8 @@
struct ieee80211_bss_conf bss_info;
/* BSSID of AP or IBSS */
- u8 bssid[IEEE80211_ADDR_LEN];
- u8 mac_addr[IEEE80211_ADDR_LEN];
+ u8 bssid[ETH_ALEN];
+ u8 mac_addr[ETH_ALEN];
/*
* Subset of supported legacy rates.
@@ -247,18 +225,11 @@
/* number of supported legacy rates */
u8 legacy_nrates;
- /* Number of supported MCS rates. Work in progress */
- u8 mcs_nrates;
-
/* Index into station database.Returned by update_sta_db call */
u8 peer_id;
/* Non AMPDU sequence number assigned by driver */
u16 seqno;
-
- /* Note:There is no channel info,
- * refer to the master channel info in priv
- */
};
#define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv))
@@ -292,28 +263,6 @@
{ .bitrate = 540, .hw_value = 108, },
};
-/* Radio settings */
-#define MWL8K_RADIO_FORCE 0x2
-#define MWL8K_RADIO_ENABLE 0x1
-#define MWL8K_RADIO_DISABLE 0x0
-#define MWL8K_RADIO_AUTO_PREAMBLE 0x0005
-#define MWL8K_RADIO_SHORT_PREAMBLE 0x0003
-#define MWL8K_RADIO_LONG_PREAMBLE 0x0001
-
-/* WMM */
-#define MWL8K_WMM_ENABLE 1
-#define MWL8K_WMM_DISABLE 0
-
-#define MWL8K_RADIO_DEFAULT_PREAMBLE MWL8K_RADIO_LONG_PREAMBLE
-
-/* Slot time */
-
-/* Short Slot: 9us slot time */
-#define MWL8K_SHORT_SLOTTIME 1
-
-/* Long slot: 20us slot time */
-#define MWL8K_LONG_SLOTTIME 0
-
/* Set or get info from Firmware */
#define MWL8K_CMD_SET 0x0001
#define MWL8K_CMD_GET 0x0000
@@ -323,25 +272,23 @@
#define MWL8K_CMD_GET_HW_SPEC 0x0003
#define MWL8K_CMD_MAC_MULTICAST_ADR 0x0010
#define MWL8K_CMD_GET_STAT 0x0014
-#define MWL8K_CMD_RADIO_CONTROL 0x001C
-#define MWL8K_CMD_RF_TX_POWER 0x001E
+#define MWL8K_CMD_RADIO_CONTROL 0x001c
+#define MWL8K_CMD_RF_TX_POWER 0x001e
#define MWL8K_CMD_SET_PRE_SCAN 0x0107
#define MWL8K_CMD_SET_POST_SCAN 0x0108
-#define MWL8K_CMD_SET_RF_CHANNEL 0x010A
-#define MWL8K_CMD_SET_SLOT 0x0114
-#define MWL8K_CMD_MIMO_CONFIG 0x0125
-#define MWL8K_CMD_ENABLE_SNIFFER 0x0150
-#define MWL8K_CMD_SET_WMM_MODE 0x0123
-#define MWL8K_CMD_SET_EDCA_PARAMS 0x0115
-#define MWL8K_CMD_SET_FINALIZE_JOIN 0x0111
-#define MWL8K_CMD_UPDATE_STADB 0x1123
-#define MWL8K_CMD_SET_RATEADAPT_MODE 0x0203
-#define MWL8K_CMD_SET_LINKADAPT_MODE 0x0129
+#define MWL8K_CMD_SET_RF_CHANNEL 0x010a
#define MWL8K_CMD_SET_AID 0x010d
#define MWL8K_CMD_SET_RATE 0x0110
-#define MWL8K_CMD_USE_FIXED_RATE 0x0126
+#define MWL8K_CMD_SET_FINALIZE_JOIN 0x0111
#define MWL8K_CMD_RTS_THRESHOLD 0x0113
-#define MWL8K_CMD_ENCRYPTION 0x1122
+#define MWL8K_CMD_SET_SLOT 0x0114
+#define MWL8K_CMD_SET_EDCA_PARAMS 0x0115
+#define MWL8K_CMD_SET_WMM_MODE 0x0123
+#define MWL8K_CMD_MIMO_CONFIG 0x0125
+#define MWL8K_CMD_USE_FIXED_RATE 0x0126
+#define MWL8K_CMD_ENABLE_SNIFFER 0x0150
+#define MWL8K_CMD_SET_RATEADAPT_MODE 0x0203
+#define MWL8K_CMD_UPDATE_STADB 0x1123
static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize)
{
@@ -349,7 +296,7 @@
snprintf(buf, bufsize, "%s", #x);\
return buf;\
} while (0)
- switch (cmd & (~0x8000)) {
+ switch (cmd & ~0x8000) {
MWL8K_CMDNAME(CODE_DNLD);
MWL8K_CMDNAME(GET_HW_SPEC);
MWL8K_CMDNAME(MAC_MULTICAST_ADR);
@@ -359,20 +306,18 @@
MWL8K_CMDNAME(SET_PRE_SCAN);
MWL8K_CMDNAME(SET_POST_SCAN);
MWL8K_CMDNAME(SET_RF_CHANNEL);
- MWL8K_CMDNAME(SET_SLOT);
- MWL8K_CMDNAME(MIMO_CONFIG);
- MWL8K_CMDNAME(ENABLE_SNIFFER);
- MWL8K_CMDNAME(SET_WMM_MODE);
- MWL8K_CMDNAME(SET_EDCA_PARAMS);
- MWL8K_CMDNAME(SET_FINALIZE_JOIN);
- MWL8K_CMDNAME(UPDATE_STADB);
- MWL8K_CMDNAME(SET_RATEADAPT_MODE);
- MWL8K_CMDNAME(SET_LINKADAPT_MODE);
MWL8K_CMDNAME(SET_AID);
MWL8K_CMDNAME(SET_RATE);
- MWL8K_CMDNAME(USE_FIXED_RATE);
+ MWL8K_CMDNAME(SET_FINALIZE_JOIN);
MWL8K_CMDNAME(RTS_THRESHOLD);
- MWL8K_CMDNAME(ENCRYPTION);
+ MWL8K_CMDNAME(SET_SLOT);
+ MWL8K_CMDNAME(SET_EDCA_PARAMS);
+ MWL8K_CMDNAME(SET_WMM_MODE);
+ MWL8K_CMDNAME(MIMO_CONFIG);
+ MWL8K_CMDNAME(USE_FIXED_RATE);
+ MWL8K_CMDNAME(ENABLE_SNIFFER);
+ MWL8K_CMDNAME(SET_RATEADAPT_MODE);
+ MWL8K_CMDNAME(UPDATE_STADB);
default:
snprintf(buf, bufsize, "0x%x", cmd);
}
@@ -466,7 +411,6 @@
{
void __iomem *regs = priv->regs;
dma_addr_t dma_addr;
- int rc;
int loops;
dma_addr = pci_map_single(priv->pdev, data, length, PCI_DMA_TODEVICE);
@@ -480,7 +424,6 @@
iowrite32(MWL8K_H2A_INT_DUMMY,
regs + MWL8K_HIU_H2A_INTERRUPT_EVENTS);
- rc = -ETIMEDOUT;
loops = 1000;
do {
u32 int_code;
@@ -488,7 +431,6 @@
int_code = ioread32(regs + MWL8K_HIU_INT_CODE);
if (int_code == MWL8K_INT_CODE_CMD_FINISHED) {
iowrite32(0, regs + MWL8K_HIU_INT_CODE);
- rc = 0;
break;
}
@@ -497,26 +439,7 @@
pci_unmap_single(priv->pdev, dma_addr, length, PCI_DMA_TODEVICE);
- /*
- * Clear 'command done' interrupt bit.
- */
- loops = 1000;
- do {
- u32 status;
-
- status = ioread32(priv->regs +
- MWL8K_HIU_A2H_INTERRUPT_STATUS);
- if (status & MWL8K_A2H_INT_OPC_DONE) {
- iowrite32(~MWL8K_A2H_INT_OPC_DONE,
- priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
- ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
- break;
- }
-
- udelay(1);
- } while (--loops);
-
- return rc;
+ return loops ? 0 : -ETIMEDOUT;
}
static int mwl8k_load_fw_image(struct mwl8k_priv *priv,
@@ -681,11 +604,9 @@
/* Peer Entry flags - used to define the type of the peer node */
#define MWL8K_PEER_TYPE_ACCESSPOINT 2
-#define MWL8K_PEER_TYPE_ADHOC_STATION 4
#define MWL8K_IEEE_LEGACY_DATA_RATES 12
#define MWL8K_MCS_BITMAP_SIZE 16
-#define pad_size 16
struct peer_capability_info {
/* Peer type - AP vs. STA. */
@@ -707,7 +628,7 @@
/* HT rate table. Intersection of our rates and peer rates. */
__u8 ht_rates[MWL8K_MCS_BITMAP_SIZE];
- __u8 pad[pad_size];
+ __u8 pad[16];
/* If set, interoperability mode, no proprietary extensions. */
__u8 interop;
@@ -717,15 +638,6 @@
} __attribute__((packed));
/* Inline functions to manipulate QoS field in data descriptor. */
-static inline u16 mwl8k_qos_setbit_tid(u16 qos, u8 tid)
-{
- u16 val_mask = 0x000f;
- u16 qos_mask = ~val_mask;
-
- /* TID bits 0-3 */
- return (qos & qos_mask) | (tid & val_mask);
-}
-
static inline u16 mwl8k_qos_setbit_eosp(u16 qos)
{
u16 val_mask = 1 << 4;
@@ -769,12 +681,11 @@
} __attribute__((packed));
/* Routines to add/remove DMA header from skb. */
-static inline int mwl8k_remove_dma_header(struct sk_buff *skb)
+static inline void mwl8k_remove_dma_header(struct sk_buff *skb)
{
- struct mwl8k_dma_data *tr = (struct mwl8k_dma_data *)(skb->data);
+ struct mwl8k_dma_data *tr = (struct mwl8k_dma_data *)skb->data;
void *dst, *src = &tr->wh;
- __le16 fc = tr->wh.frame_control;
- int hdrlen = ieee80211_hdrlen(fc);
+ int hdrlen = ieee80211_hdrlen(tr->wh.frame_control);
u16 space = sizeof(struct mwl8k_dma_data) - hdrlen;
dst = (void *)tr + space;
@@ -782,11 +693,9 @@
memmove(dst, src, hdrlen);
skb_pull(skb, space);
}
-
- return 0;
}
-static inline struct sk_buff *mwl8k_add_dma_header(struct sk_buff *skb)
+static inline void mwl8k_add_dma_header(struct sk_buff *skb)
{
struct ieee80211_hdr *wh;
u32 hdrlen, pktlen;
@@ -810,7 +719,7 @@
memmove(&tr->wh, wh, hdrlen);
/* Clear addr4 */
- memset(tr->wh.addr4, 0, IEEE80211_ADDR_LEN);
+ memset(tr->wh.addr4, 0, ETH_ALEN);
/*
* Firmware length is the length of the fully formed "802.11
@@ -818,17 +727,13 @@
* This includes all crypto material including the MIC.
*/
tr->fwlen = cpu_to_le16(pktlen - hdrlen);
-
- return skb;
}
/*
* Packet reception.
*/
-#define MWL8K_RX_CTRL_KEY_INDEX_MASK 0x30
#define MWL8K_RX_CTRL_OWNED_BY_HOST 0x02
-#define MWL8K_RX_CTRL_AMPDU 0x01
struct mwl8k_rx_desc {
__le16 pkt_len;
@@ -979,7 +884,7 @@
struct sk_buff *skb)
{
priv->capture_beacon = false;
- memset(priv->capture_bssid, 0, IEEE80211_ADDR_LEN);
+ memset(priv->capture_bssid, 0, ETH_ALEN);
/*
* Use GFP_ATOMIC as rxq_process is called from
@@ -1024,10 +929,7 @@
MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
skb_put(skb, le16_to_cpu(rx_desc->pkt_len));
- if (mwl8k_remove_dma_header(skb)) {
- dev_kfree_skb(skb);
- continue;
- }
+ mwl8k_remove_dma_header(skb);
wh = (struct ieee80211_hdr *)skb->data;
@@ -1049,7 +951,8 @@
status.flag = 0;
status.band = IEEE80211_BAND_2GHZ;
status.freq = ieee80211_channel_to_frequency(rx_desc->channel);
- ieee80211_rx_irqsafe(hw, skb, &status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx_irqsafe(hw, skb);
processed++;
}
@@ -1072,8 +975,6 @@
/* Transmit packet ACK policy */
#define MWL8K_TXD_ACK_POLICY_NORMAL 0
-#define MWL8K_TXD_ACK_POLICY_NONE 1
-#define MWL8K_TXD_ACK_POLICY_NO_EXPLICIT 2
#define MWL8K_TXD_ACK_POLICY_BLOCKACK 3
#define GET_TXQ(_ac) (\
@@ -1082,20 +983,11 @@
((_ac) == WME_AC_BK) ? MWL8K_WME_AC_BK : \
MWL8K_WME_AC_BE)
-#define MWL8K_TXD_STATUS_IDLE 0x00000000
-#define MWL8K_TXD_STATUS_USED 0x00000001
#define MWL8K_TXD_STATUS_OK 0x00000001
#define MWL8K_TXD_STATUS_OK_RETRY 0x00000002
#define MWL8K_TXD_STATUS_OK_MORE_RETRY 0x00000004
#define MWL8K_TXD_STATUS_MULTICAST_TX 0x00000008
-#define MWL8K_TXD_STATUS_BROADCAST_TX 0x00000010
-#define MWL8K_TXD_STATUS_FAILED_LINK_ERROR 0x00000020
-#define MWL8K_TXD_STATUS_FAILED_EXCEED_LIMIT 0x00000040
-#define MWL8K_TXD_STATUS_FAILED_AGING 0x00000080
-#define MWL8K_TXD_STATUS_HOST_CMD 0x40000000
#define MWL8K_TXD_STATUS_FW_OWNED 0x80000000
-#define MWL8K_TXD_SOFTSTALE 0x80
-#define MWL8K_TXD_SOFTSTALE_MGMT_RETRY 0x01
struct mwl8k_tx_desc {
__le32 status;
@@ -1104,7 +996,7 @@
__le16 qos_control;
__le32 pkt_phys_addr;
__le16 pkt_len;
- __u8 dest_MAC_addr[IEEE80211_ADDR_LEN];
+ __u8 dest_MAC_addr[ETH_ALEN];
__le32 next_tx_desc_phys_addr;
__le32 reserved;
__le16 rate_info;
@@ -1121,8 +1013,7 @@
int size;
int i;
- memset(&txq->tx_stats, 0,
- sizeof(struct ieee80211_tx_queue_stats));
+ memset(&txq->tx_stats, 0, sizeof(struct ieee80211_tx_queue_stats));
txq->tx_stats.limit = MWL8K_TX_DESCS;
txq->tx_head = 0;
txq->tx_tail = 0;
@@ -1189,17 +1080,17 @@
};
static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv,
- struct mwl8k_txq_info txinfo[],
- u32 num_queues)
+ struct mwl8k_txq_info *txinfo)
{
int count, desc, status;
struct mwl8k_tx_queue *txq;
struct mwl8k_tx_desc *tx_desc;
int ndescs = 0;
- memset(txinfo, 0, num_queues * sizeof(struct mwl8k_txq_info));
+ memset(txinfo, 0, MWL8K_TX_QUEUES * sizeof(struct mwl8k_txq_info));
+
spin_lock_bh(&priv->tx_lock);
- for (count = 0; count < num_queues; count++) {
+ for (count = 0; count < MWL8K_TX_QUEUES; count++) {
txq = priv->txq + count;
txinfo[count].len = txq->tx_stats.len;
txinfo[count].head = txq->tx_head;
@@ -1222,34 +1113,34 @@
return ndescs;
}
-static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw, u32 delay_ms)
+/*
+ * Must be called with hw->fw_mutex held and tx queues stopped.
+ */
+static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
{
- u32 count = 0;
- unsigned long timeout = 0;
struct mwl8k_priv *priv = hw->priv;
DECLARE_COMPLETION_ONSTACK(cmd_wait);
+ u32 count;
+ unsigned long timeout;
might_sleep();
- if (priv->tx_wait != NULL)
- printk(KERN_ERR "WARNING Previous TXWaitEmpty instance\n");
-
spin_lock_bh(&priv->tx_lock);
count = mwl8k_txq_busy(priv);
if (count) {
priv->tx_wait = &cmd_wait;
- if (priv->radio_state)
+ if (priv->radio_on)
mwl8k_tx_start(priv);
}
spin_unlock_bh(&priv->tx_lock);
if (count) {
- struct mwl8k_txq_info txinfo[4];
+ struct mwl8k_txq_info txinfo[MWL8K_TX_QUEUES];
int index;
int newcount;
timeout = wait_for_completion_timeout(&cmd_wait,
- msecs_to_jiffies(delay_ms));
+ msecs_to_jiffies(5000));
if (timeout)
return 0;
@@ -1258,11 +1149,11 @@
newcount = mwl8k_txq_busy(priv);
spin_unlock_bh(&priv->tx_lock);
- printk(KERN_ERR "%s(%u) TIMEDOUT:%ums Pend:%u-->%u\n",
- __func__, __LINE__, delay_ms, count, newcount);
+ printk(KERN_ERR "%s(%u) TIMEDOUT:5000ms Pend:%u-->%u\n",
+ __func__, __LINE__, count, newcount);
- mwl8k_scan_tx_ring(priv, txinfo, 4);
- for (index = 0 ; index < 4; index++)
+ mwl8k_scan_tx_ring(priv, txinfo);
+ for (index = 0; index < MWL8K_TX_QUEUES; index++)
printk(KERN_ERR
"TXQ:%u L:%u H:%u T:%u FW:%u DRV:%u U:%u\n",
index,
@@ -1272,18 +1163,17 @@
txinfo[index].fw_owned,
txinfo[index].drv_owned,
txinfo[index].unused);
+
return -ETIMEDOUT;
}
return 0;
}
-#define MWL8K_TXD_OK (MWL8K_TXD_STATUS_OK | \
- MWL8K_TXD_STATUS_OK_RETRY | \
- MWL8K_TXD_STATUS_OK_MORE_RETRY)
-#define MWL8K_TXD_SUCCESS(stat) ((stat) & MWL8K_TXD_OK)
-#define MWL8K_TXD_FAIL_RETRY(stat) \
- ((stat) & (MWL8K_TXD_STATUS_FAILED_EXCEED_LIMIT))
+#define MWL8K_TXD_SUCCESS(status) \
+ ((status) & (MWL8K_TXD_STATUS_OK | \
+ MWL8K_TXD_STATUS_OK_RETRY | \
+ MWL8K_TXD_STATUS_OK_MORE_RETRY))
static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force)
{
@@ -1293,15 +1183,13 @@
while (txq->tx_stats.len > 0) {
int tx;
- int rc;
struct mwl8k_tx_desc *tx_desc;
unsigned long addr;
- size_t size;
+ int size;
struct sk_buff *skb;
struct ieee80211_tx_info *info;
u32 status;
- rc = 0;
tx = txq->tx_head;
tx_desc = txq->tx_desc_area + tx;
@@ -1320,56 +1208,30 @@
priv->pending_tx_pkts--;
addr = le32_to_cpu(tx_desc->pkt_phys_addr);
- size = (u32)(le16_to_cpu(tx_desc->pkt_len));
- skb = txq->tx_skb[tx].skb;
- txq->tx_skb[tx].skb = NULL;
+ size = le16_to_cpu(tx_desc->pkt_len);
+ skb = txq->tx_skb[tx];
+ txq->tx_skb[tx] = NULL;
BUG_ON(skb == NULL);
pci_unmap_single(priv->pdev, addr, size, PCI_DMA_TODEVICE);
- rc = mwl8k_remove_dma_header(skb);
+ mwl8k_remove_dma_header(skb);
/* Mark descriptor as unused */
tx_desc->pkt_phys_addr = 0;
tx_desc->pkt_len = 0;
- if (txq->tx_skb[tx].clone) {
- /* Replace with original skb
- * before returning to stack
- * as buffer has been cloned
- */
- dev_kfree_skb(skb);
- skb = txq->tx_skb[tx].clone;
- txq->tx_skb[tx].clone = NULL;
- }
-
- if (rc) {
- /* Something has gone wrong here.
- * Failed to remove DMA header.
- * Print error message and drop packet.
- */
- printk(KERN_ERR "%s: Error removing DMA header from "
- "tx skb 0x%p.\n", priv->name, skb);
-
- dev_kfree_skb(skb);
- continue;
- }
-
info = IEEE80211_SKB_CB(skb);
ieee80211_tx_info_clear_status(info);
-
- /* Convert firmware status stuff into tx_status */
- if (MWL8K_TXD_SUCCESS(status)) {
- /* Transmit OK */
+ if (MWL8K_TXD_SUCCESS(status))
info->flags |= IEEE80211_TX_STAT_ACK;
- }
ieee80211_tx_status_irqsafe(hw, skb);
- wake = !priv->inconfig && priv->radio_state;
+ wake = 1;
}
- if (wake)
+ if (wake && priv->radio_on && !mutex_is_locked(&priv->fw_mutex))
ieee80211_wake_queue(hw, index);
}
@@ -1395,56 +1257,60 @@
{
struct mwl8k_priv *priv = hw->priv;
struct ieee80211_tx_info *tx_info;
+ struct mwl8k_vif *mwl8k_vif;
struct ieee80211_hdr *wh;
struct mwl8k_tx_queue *txq;
struct mwl8k_tx_desc *tx;
- struct mwl8k_dma_data *tr;
- struct mwl8k_vif *mwl8k_vif;
- struct sk_buff *org_skb = skb;
dma_addr_t dma;
- u16 qos = 0;
- bool qosframe = false, ampduframe = false;
- bool mcframe = false, eapolframe = false;
- bool amsduframe = false;
- __le16 fc;
+ u32 txstatus;
+ u8 txdatarate;
+ u16 qos;
- txq = priv->txq + index;
- tx = txq->tx_desc_area + txq->tx_tail;
+ wh = (struct ieee80211_hdr *)skb->data;
+ if (ieee80211_is_data_qos(wh->frame_control))
+ qos = le16_to_cpu(*((__le16 *)ieee80211_get_qos_ctl(wh)));
+ else
+ qos = 0;
- BUG_ON(txq->tx_skb[txq->tx_tail].skb != NULL);
-
- /*
- * Append HW DMA header to start of packet. Drop packet if
- * there is not enough space or a failure to unshare/unclone
- * the skb.
- */
- skb = mwl8k_add_dma_header(skb);
-
- if (skb == NULL) {
- printk(KERN_DEBUG "%s: failed to prepend HW DMA "
- "header, dropping TX frame.\n", priv->name);
- dev_kfree_skb(org_skb);
- return NETDEV_TX_OK;
- }
+ mwl8k_add_dma_header(skb);
+ wh = &((struct mwl8k_dma_data *)skb->data)->wh;
tx_info = IEEE80211_SKB_CB(skb);
mwl8k_vif = MWL8K_VIF(tx_info->control.vif);
- tr = (struct mwl8k_dma_data *)skb->data;
- wh = &tr->wh;
- fc = wh->frame_control;
- qosframe = ieee80211_is_data_qos(fc);
- mcframe = is_multicast_ether_addr(wh->addr1);
- ampduframe = !!(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
u16 seqno = mwl8k_vif->seqno;
+
wh->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
wh->seq_ctrl |= cpu_to_le16(seqno << 4);
mwl8k_vif->seqno = seqno++ % 4096;
}
- if (qosframe)
- qos = le16_to_cpu(*((__le16 *)ieee80211_get_qos_ctl(wh)));
+ /* Setup firmware control bit fields for each frame type. */
+ txstatus = 0;
+ txdatarate = 0;
+ if (ieee80211_is_mgmt(wh->frame_control) ||
+ ieee80211_is_ctl(wh->frame_control)) {
+ txdatarate = 0;
+ qos = mwl8k_qos_setbit_eosp(qos);
+ /* Set Queue size to unspecified */
+ qos = mwl8k_qos_setbit_qlen(qos, 0xff);
+ } else if (ieee80211_is_data(wh->frame_control)) {
+ txdatarate = 1;
+ if (is_multicast_ether_addr(wh->addr1))
+ txstatus |= MWL8K_TXD_STATUS_MULTICAST_TX;
+
+ /* Send pkt in an aggregate if AMPDU frame. */
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ qos = mwl8k_qos_setbit_ack(qos,
+ MWL8K_TXD_ACK_POLICY_BLOCKACK);
+ else
+ qos = mwl8k_qos_setbit_ack(qos,
+ MWL8K_TXD_ACK_POLICY_NORMAL);
+
+ if (qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
+ qos = mwl8k_qos_setbit_amsdu(qos);
+ }
dma = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
@@ -1452,99 +1318,40 @@
if (pci_dma_mapping_error(priv->pdev, dma)) {
printk(KERN_DEBUG "%s: failed to dma map skb, "
"dropping TX frame.\n", priv->name);
-
- if (org_skb != NULL)
- dev_kfree_skb(org_skb);
- if (skb != NULL)
- dev_kfree_skb(skb);
+ dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- /* Set desc header, cpu bit order. */
- tx->status = 0;
- tx->data_rate = 0;
- tx->tx_priority = index;
- tx->qos_control = 0;
- tx->rate_info = 0;
- tx->peer_id = mwl8k_vif->peer_id;
-
- amsduframe = !!(qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT);
-
- /* Setup firmware control bit fields for each frame type. */
- if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) {
- tx->data_rate = 0;
- qos = mwl8k_qos_setbit_eosp(qos);
- /* Set Queue size to unspecified */
- qos = mwl8k_qos_setbit_qlen(qos, 0xff);
- } else if (ieee80211_is_data(fc)) {
- tx->data_rate = 1;
- if (mcframe)
- tx->status |= MWL8K_TXD_STATUS_MULTICAST_TX;
-
- /*
- * Tell firmware to not send EAPOL pkts in an
- * aggregate. Verify against mac80211 tx path. If
- * stack turns off AMPDU for an EAPOL frame this
- * check will be removed.
- */
- if (eapolframe) {
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_NORMAL);
- } else {
- /* Send pkt in an aggregate if AMPDU frame. */
- if (ampduframe)
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_BLOCKACK);
- else
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_NORMAL);
-
- if (amsduframe)
- qos = mwl8k_qos_setbit_amsdu(qos);
- }
- }
-
- /* Convert to little endian */
- tx->qos_control = cpu_to_le16(qos);
- tx->status = cpu_to_le32(tx->status);
- tx->pkt_phys_addr = cpu_to_le32(dma);
- tx->pkt_len = cpu_to_le16(skb->len);
-
- txq->tx_skb[txq->tx_tail].skb = skb;
- txq->tx_skb[txq->tx_tail].clone =
- skb == org_skb ? NULL : org_skb;
-
spin_lock_bh(&priv->tx_lock);
- tx->status = cpu_to_le32(MWL8K_TXD_STATUS_OK |
- MWL8K_TXD_STATUS_FW_OWNED);
+ txq = priv->txq + index;
+
+ BUG_ON(txq->tx_skb[txq->tx_tail] != NULL);
+ txq->tx_skb[txq->tx_tail] = skb;
+
+ tx = txq->tx_desc_area + txq->tx_tail;
+ tx->data_rate = txdatarate;
+ tx->tx_priority = index;
+ tx->qos_control = cpu_to_le16(qos);
+ tx->pkt_phys_addr = cpu_to_le32(dma);
+ tx->pkt_len = cpu_to_le16(skb->len);
+ tx->rate_info = 0;
+ tx->peer_id = mwl8k_vif->peer_id;
wmb();
+ tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
+
+ txq->tx_stats.count++;
txq->tx_stats.len++;
priv->pending_tx_pkts++;
- txq->tx_stats.count++;
- txq->tx_tail++;
+ txq->tx_tail++;
if (txq->tx_tail == MWL8K_TX_DESCS)
txq->tx_tail = 0;
+
if (txq->tx_head == txq->tx_tail)
ieee80211_stop_queue(hw, index);
- if (priv->inconfig) {
- /*
- * Silently queue packet when we are in the middle of
- * a config cycle. Notify firmware only if we are
- * waiting for TXQs to empty. If a packet is sent
- * before .config() is complete, perhaps it is better
- * to drop the packet, as the channel is being changed
- * and the packet will end up on the wrong channel.
- */
- printk(KERN_ERR "%s(): WARNING TX activity while "
- "in config\n", __func__);
-
- if (priv->tx_wait != NULL)
- mwl8k_tx_start(priv);
- } else
- mwl8k_tx_start(priv);
+ mwl8k_tx_start(priv);
spin_unlock_bh(&priv->tx_lock);
@@ -1553,6 +1360,60 @@
/*
+ * Firmware access.
+ *
+ * We have the following requirements for issuing firmware commands:
+ * - Some commands require that the packet transmit path is idle when
+ * the command is issued. (For simplicity, we'll just quiesce the
+ * transmit path for every command.)
+ * - There are certain sequences of commands that need to be issued to
+ * the hardware sequentially, with no other intervening commands.
+ *
+ * This leads to an implementation of a "firmware lock" as a mutex that
+ * can be taken recursively, and which is taken by both the low-level
+ * command submission function (mwl8k_post_cmd) as well as any users of
+ * that function that require issuing of an atomic sequence of commands,
+ * and quiesces the transmit path whenever it's taken.
+ */
+static int mwl8k_fw_lock(struct ieee80211_hw *hw)
+{
+ struct mwl8k_priv *priv = hw->priv;
+
+ if (priv->fw_mutex_owner != current) {
+ int rc;
+
+ mutex_lock(&priv->fw_mutex);
+ ieee80211_stop_queues(hw);
+
+ rc = mwl8k_tx_wait_empty(hw);
+ if (rc) {
+ ieee80211_wake_queues(hw);
+ mutex_unlock(&priv->fw_mutex);
+
+ return rc;
+ }
+
+ priv->fw_mutex_owner = current;
+ }
+
+ priv->fw_mutex_depth++;
+
+ return 0;
+}
+
+static void mwl8k_fw_unlock(struct ieee80211_hw *hw)
+{
+ struct mwl8k_priv *priv = hw->priv;
+
+ if (!--priv->fw_mutex_depth) {
+ ieee80211_wake_queues(hw);
+ priv->fw_mutex_owner = NULL;
+ mutex_unlock(&priv->fw_mutex);
+ }
+}
+
+
+/*
* Command processing.
*/
@@ -1567,7 +1428,6 @@
dma_addr_t dma_addr;
unsigned int dma_size;
int rc;
- u16 __iomem *result;
unsigned long timeout = 0;
u8 buf[32];
@@ -1578,41 +1438,43 @@
if (pci_dma_mapping_error(priv->pdev, dma_addr))
return -ENOMEM;
- if (priv->hostcmd_wait != NULL)
- printk(KERN_ERR "WARNING host command in progress\n");
+ rc = mwl8k_fw_lock(hw);
+ if (rc) {
+ pci_unmap_single(priv->pdev, dma_addr, dma_size,
+ PCI_DMA_BIDIRECTIONAL);
+ return rc;
+ }
- spin_lock_irq(&priv->fw_lock);
priv->hostcmd_wait = &cmd_wait;
iowrite32(dma_addr, regs + MWL8K_HIU_GEN_PTR);
iowrite32(MWL8K_H2A_INT_DOORBELL,
regs + MWL8K_HIU_H2A_INTERRUPT_EVENTS);
iowrite32(MWL8K_H2A_INT_DUMMY,
regs + MWL8K_HIU_H2A_INTERRUPT_EVENTS);
- spin_unlock_irq(&priv->fw_lock);
timeout = wait_for_completion_timeout(&cmd_wait,
msecs_to_jiffies(MWL8K_CMD_TIMEOUT_MS));
+ priv->hostcmd_wait = NULL;
+
+ mwl8k_fw_unlock(hw);
+
pci_unmap_single(priv->pdev, dma_addr, dma_size,
PCI_DMA_BIDIRECTIONAL);
- result = &cmd->result;
if (!timeout) {
- spin_lock_irq(&priv->fw_lock);
- priv->hostcmd_wait = NULL;
- spin_unlock_irq(&priv->fw_lock);
printk(KERN_ERR "%s: Command %s timeout after %u ms\n",
priv->name,
mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
MWL8K_CMD_TIMEOUT_MS);
rc = -ETIMEDOUT;
} else {
- rc = *result ? -EINVAL : 0;
+ rc = cmd->result ? -EINVAL : 0;
if (rc)
printk(KERN_ERR "%s: Command %s error 0x%x\n",
priv->name,
mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
- *result);
+ le16_to_cpu(cmd->result));
}
return rc;
@@ -1626,7 +1488,7 @@
__u8 hw_rev;
__u8 host_interface;
__le16 num_mcaddrs;
- __u8 perm_addr[IEEE80211_ADDR_LEN];
+ __u8 perm_addr[ETH_ALEN];
__le16 region_code;
__le32 fw_rev;
__le32 ps_cookie;
@@ -1670,7 +1532,6 @@
priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
priv->fw_rev = le32_to_cpu(cmd->fw_rev);
priv->hw_rev = cmd->hw_rev;
- priv->region_code = le16_to_cpu(cmd->region_code);
}
kfree(cmd);
@@ -1684,41 +1545,44 @@
struct mwl8k_cmd_pkt header;
__le16 action;
__le16 numaddr;
- __u8 addr[1][IEEE80211_ADDR_LEN];
+ __u8 addr[0][ETH_ALEN];
};
#define MWL8K_ENABLE_RX_MULTICAST 0x000F
-static int mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
- int mc_count,
- struct dev_addr_list *mclist)
+
+static struct mwl8k_cmd_pkt *
+__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mclist)
{
+ struct mwl8k_priv *priv = hw->priv;
struct mwl8k_cmd_mac_multicast_adr *cmd;
- int index = 0;
- int rc;
- int size = sizeof(*cmd) + ((mc_count - 1) * IEEE80211_ADDR_LEN);
- cmd = kzalloc(size, GFP_KERNEL);
+ int size;
+ int i;
+
+ if (mc_count > priv->num_mcaddrs)
+ mc_count = priv->num_mcaddrs;
+
+ size = sizeof(*cmd) + mc_count * ETH_ALEN;
+
+ cmd = kzalloc(size, GFP_ATOMIC);
if (cmd == NULL)
- return -ENOMEM;
+ return NULL;
cmd->header.code = cpu_to_le16(MWL8K_CMD_MAC_MULTICAST_ADR);
cmd->header.length = cpu_to_le16(size);
cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
cmd->numaddr = cpu_to_le16(mc_count);
- while ((index < mc_count) && mclist) {
- if (mclist->da_addrlen != IEEE80211_ADDR_LEN) {
- rc = -EINVAL;
- goto mwl8k_cmd_mac_multicast_adr_exit;
+
+ for (i = 0; i < mc_count && mclist; i++) {
+ if (mclist->da_addrlen != ETH_ALEN) {
+ kfree(cmd);
+ return NULL;
}
- memcpy(cmd->addr[index], mclist->da_addr, IEEE80211_ADDR_LEN);
- index++;
+ memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
mclist = mclist->next;
}
- rc = mwl8k_post_cmd(hw, &cmd->header);
-
-mwl8k_cmd_mac_multicast_adr_exit:
- kfree(cmd);
- return rc;
+ return &cmd->header;
}
/*
@@ -1775,18 +1639,16 @@
__le16 radio_on;
} __attribute__((packed));
-static int mwl8k_cmd_802_11_radio_control(struct ieee80211_hw *hw, int enable)
+static int
+mwl8k_cmd_802_11_radio_control(struct ieee80211_hw *hw, bool enable, bool force)
{
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_cmd_802_11_radio_control *cmd;
int rc;
- if (((enable & MWL8K_RADIO_ENABLE) == priv->radio_state) &&
- !(enable & MWL8K_RADIO_FORCE))
+ if (enable == priv->radio_on && !force)
return 0;
- enable &= MWL8K_RADIO_ENABLE;
-
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
return -ENOMEM;
@@ -1794,18 +1656,28 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_RADIO_CONTROL);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->action = cpu_to_le16(MWL8K_CMD_SET);
- cmd->control = cpu_to_le16(priv->radio_preamble);
+ cmd->control = cpu_to_le16(priv->radio_short_preamble ? 3 : 1);
cmd->radio_on = cpu_to_le16(enable ? 0x0001 : 0x0000);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
if (!rc)
- priv->radio_state = enable;
+ priv->radio_on = enable;
return rc;
}
+static int mwl8k_cmd_802_11_radio_disable(struct ieee80211_hw *hw)
+{
+ return mwl8k_cmd_802_11_radio_control(hw, 0, 0);
+}
+
+static int mwl8k_cmd_802_11_radio_enable(struct ieee80211_hw *hw)
+{
+ return mwl8k_cmd_802_11_radio_control(hw, 1, 0);
+}
+
static int
mwl8k_set_radio_preamble(struct ieee80211_hw *hw, bool short_preamble)
{
@@ -1815,12 +1687,9 @@
return -EINVAL;
priv = hw->priv;
- priv->radio_preamble = (short_preamble ?
- MWL8K_RADIO_SHORT_PREAMBLE :
- MWL8K_RADIO_LONG_PREAMBLE);
+ priv->radio_short_preamble = short_preamble;
- return mwl8k_cmd_802_11_radio_control(hw,
- MWL8K_RADIO_ENABLE | MWL8K_RADIO_FORCE);
+ return mwl8k_cmd_802_11_radio_control(hw, 1, 1);
}
/*
@@ -1888,11 +1757,11 @@
struct mwl8k_cmd_set_post_scan {
struct mwl8k_cmd_pkt header;
__le32 isibss;
- __u8 bssid[IEEE80211_ADDR_LEN];
+ __u8 bssid[ETH_ALEN];
} __attribute__((packed));
static int
-mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, __u8 mac[IEEE80211_ADDR_LEN])
+mwl8k_cmd_set_post_scan(struct ieee80211_hw *hw, __u8 *mac)
{
struct mwl8k_cmd_set_post_scan *cmd;
int rc;
@@ -1904,7 +1773,7 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_POST_SCAN);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->isibss = 0;
- memcpy(cmd->bssid, mac, IEEE80211_ADDR_LEN);
+ memcpy(cmd->bssid, mac, ETH_ALEN);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
@@ -1956,7 +1825,7 @@
__u8 short_slot;
} __attribute__((packed));
-static int mwl8k_cmd_set_slot(struct ieee80211_hw *hw, int slot_time)
+static int mwl8k_cmd_set_slot(struct ieee80211_hw *hw, bool short_slot_time)
{
struct mwl8k_cmd_set_slot *cmd;
int rc;
@@ -1968,7 +1837,7 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_SLOT);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->action = cpu_to_le16(MWL8K_CMD_SET);
- cmd->short_slot = slot_time == MWL8K_SHORT_SLOTTIME ? 1 : 0;
+ cmd->short_slot = short_slot_time;
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
@@ -2026,7 +1895,7 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_ENABLE_SNIFFER);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = enable ? cpu_to_le32((u32)MWL8K_CMD_SET) : 0;
+ cmd->action = cpu_to_le32(!!enable);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
@@ -2035,7 +1904,7 @@
}
/*
- * CMD_SET_RATE_ADAPT_MODE.
+ * CMD_SET_RATEADAPT_MODE.
*/
struct mwl8k_cmd_set_rate_adapt_mode {
struct mwl8k_cmd_pkt header;
@@ -2083,13 +1952,13 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_WMM_MODE);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
- cmd->action = enable ? cpu_to_le16(MWL8K_CMD_SET) : 0;
+ cmd->action = cpu_to_le16(!!enable);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
if (!rc)
- priv->wmm_mode = enable;
+ priv->wmm_enabled = enable;
return rc;
}
@@ -2104,7 +1973,7 @@
} __attribute__((packed));
static int mwl8k_rts_threshold(struct ieee80211_hw *hw,
- u16 action, u16 *threshold)
+ u16 action, u16 threshold)
{
struct mwl8k_cmd_rts_threshold *cmd;
int rc;
@@ -2116,7 +1985,7 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_RTS_THRESHOLD);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->action = cpu_to_le16(action);
- cmd->threshold = cpu_to_le16(*threshold);
+ cmd->threshold = cpu_to_le16(threshold);
rc = mwl8k_post_cmd(hw, &cmd->header);
kfree(cmd);
@@ -2149,7 +2018,6 @@
__u8 txq;
} __attribute__((packed));
-#define MWL8K_GET_EDCA_ALL 0
#define MWL8K_SET_EDCA_CW 0x01
#define MWL8K_SET_EDCA_TXOP 0x02
#define MWL8K_SET_EDCA_AIFS 0x04
@@ -2164,22 +2032,18 @@
__u8 aifs, __u16 txop)
{
struct mwl8k_cmd_set_edca_params *cmd;
- u32 log_cw_min, log_cw_max;
int rc;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
return -ENOMEM;
- log_cw_min = ilog2(cw_min+1);
- log_cw_max = ilog2(cw_max+1);
cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_EDCA_PARAMS);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
-
cmd->action = cpu_to_le16(MWL8K_SET_EDCA_ALL);
cmd->txop = cpu_to_le16(txop);
- cmd->log_cw_max = (u8)log_cw_max;
- cmd->log_cw_min = (u8)log_cw_min;
+ cmd->log_cw_max = (u8)ilog2(cw_max + 1);
+ cmd->log_cw_min = (u8)ilog2(cw_min + 1);
cmd->aifs = aifs;
cmd->txq = qnum;
@@ -2220,11 +2084,7 @@
cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_FINALIZE_JOIN);
cmd->header.length = cpu_to_le16(sizeof(*cmd));
-
- if (dtim)
- cmd->sleep_interval = cpu_to_le32(dtim);
- else
- cmd->sleep_interval = cpu_to_le32(1);
+ cmd->sleep_interval = cpu_to_le32(dtim ? dtim : 1);
hdrlen = ieee80211_hdrlen(payload->frame_control);
@@ -2236,8 +2096,8 @@
"sent to firmware. Sz=%u MAX=%u\n", __func__,
payload_len, MWL8K_FJ_BEACON_MAXLEN);
- payload_len = payload_len > MWL8K_FJ_BEACON_MAXLEN ?
- MWL8K_FJ_BEACON_MAXLEN : payload_len;
+ if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
+ payload_len = MWL8K_FJ_BEACON_MAXLEN;
if (payload && payload_len)
memcpy(cmd->beacon_data, &payload->u.beacon, payload_len);
@@ -2257,7 +2117,7 @@
__le32 action;
/* Peer MAC address */
- __u8 peer_addr[IEEE80211_ADDR_LEN];
+ __u8 peer_addr[ETH_ALEN];
__le32 reserved;
@@ -2273,7 +2133,6 @@
struct mwl8k_cmd_update_sta_db *cmd;
struct peer_capability_info *peer_info;
struct ieee80211_rate *bitrates = mv_vif->legacy_rates;
- DECLARE_MAC_BUF(mac);
int rc;
__u8 count, *rates;
@@ -2286,7 +2145,7 @@
cmd->action = cpu_to_le32(action);
peer_info = &cmd->peer_info;
- memcpy(cmd->peer_addr, mv_vif->bssid, IEEE80211_ADDR_LEN);
+ memcpy(cmd->peer_addr, mv_vif->bssid, ETH_ALEN);
switch (action) {
case MWL8K_STA_DB_ADD_ENTRY:
@@ -2298,7 +2157,7 @@
peer_info->amsdu_enabled = 0;
rates = peer_info->legacy_rates;
- for (count = 0 ; count < mv_vif->legacy_nrates; count++)
+ for (count = 0; count < mv_vif->legacy_nrates; count++)
rates[count] = bitrates[count].hw_value;
rc = mwl8k_post_cmd(hw, &cmd->header);
@@ -2323,25 +2182,19 @@
/*
* CMD_SET_AID.
*/
-#define IEEE80211_OPMODE_DISABLED 0x00
-#define IEEE80211_OPMODE_NON_MEMBER_PROT_MODE 0x01
-#define IEEE80211_OPMODE_ONE_20MHZ_STA_PROT_MODE 0x02
-#define IEEE80211_OPMODE_HTMIXED_PROT_MODE 0x03
-
#define MWL8K_RATE_INDEX_MAX_ARRAY 14
#define MWL8K_FRAME_PROT_DISABLED 0x00
#define MWL8K_FRAME_PROT_11G 0x07
#define MWL8K_FRAME_PROT_11N_HT_40MHZ_ONLY 0x02
#define MWL8K_FRAME_PROT_11N_HT_ALL 0x06
-#define MWL8K_FRAME_PROT_MASK 0x07
struct mwl8k_cmd_update_set_aid {
struct mwl8k_cmd_pkt header;
__le16 aid;
/* AP's MAC address (BSSID) */
- __u8 bssid[IEEE80211_ADDR_LEN];
+ __u8 bssid[ETH_ALEN];
__le16 protection_mode;
__u8 supp_rates[MWL8K_RATE_INDEX_MAX_ARRAY];
} __attribute__((packed));
@@ -2365,9 +2218,7 @@
cmd->header.length = cpu_to_le16(sizeof(*cmd));
cmd->aid = cpu_to_le16(info->aid);
- memcpy(cmd->bssid, mv_vif->bssid, IEEE80211_ADDR_LEN);
-
- prot_mode = MWL8K_FRAME_PROT_DISABLED;
+ memcpy(cmd->bssid, mv_vif->bssid, ETH_ALEN);
if (info->use_cts_prot) {
prot_mode = MWL8K_FRAME_PROT_11G;
@@ -2385,7 +2236,6 @@
break;
}
}
-
cmd->protection_mode = cpu_to_le16(prot_mode);
for (count = 0; count < mv_vif->legacy_nrates; count++)
@@ -2439,10 +2289,6 @@
*/
#define MWL8K_RATE_TABLE_SIZE 8
#define MWL8K_UCAST_RATE 0
-#define MWL8K_MCAST_RATE 1
-#define MWL8K_BCAST_RATE 2
-
-#define MWL8K_USE_FIXED_RATE 0x0001
#define MWL8K_USE_AUTO_RATE 0x0002
struct mwl8k_rate_entry {
@@ -2535,7 +2381,6 @@
status = ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
iowrite32(~status, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
- status &= priv->int_mask;
if (!status)
return IRQ_NONE;
@@ -2548,17 +2393,14 @@
}
if (status & MWL8K_A2H_INT_OPC_DONE) {
- if (priv->hostcmd_wait != NULL) {
+ if (priv->hostcmd_wait != NULL)
complete(priv->hostcmd_wait);
- priv->hostcmd_wait = NULL;
- }
}
if (status & MWL8K_A2H_INT_QUEUE_EMPTY) {
- if (!priv->inconfig &&
- priv->radio_state &&
- mwl8k_txq_busy(priv))
- mwl8k_tx_start(priv);
+ if (!mutex_is_locked(&priv->fw_mutex) &&
+ priv->radio_on && mwl8k_txq_busy(priv))
+ mwl8k_tx_start(priv);
}
return IRQ_HANDLED;
@@ -2586,365 +2428,68 @@
return rc;
}
-struct mwl8k_work_struct {
- /* Initialized by mwl8k_queue_work(). */
- struct work_struct wt;
-
- /* Required field passed in to mwl8k_queue_work(). */
- struct ieee80211_hw *hw;
-
- /* Required field passed in to mwl8k_queue_work(). */
- int (*wfunc)(struct work_struct *w);
-
- /* Initialized by mwl8k_queue_work(). */
- struct completion *cmd_wait;
-
- /* Result code. */
- int rc;
-
- /*
- * Optional field. Refer to explanation of MWL8K_WQ_XXX_XXX
- * flags for explanation. Defaults to MWL8K_WQ_DEFAULT_OPTIONS.
- */
- u32 options;
-
- /* Optional field. Defaults to MWL8K_CONFIG_TIMEOUT_MS. */
- unsigned long timeout_ms;
-
- /* Optional field. Defaults to MWL8K_WQ_TXWAIT_ATTEMPTS. */
- u32 txwait_attempts;
-
- /* Optional field. Defaults to MWL8K_TXWAIT_MS. */
- u32 tx_timeout_ms;
- u32 step;
-};
-
-/* Flags controlling behavior of config queue requests */
-
-/* Caller spins while waiting for completion. */
-#define MWL8K_WQ_SPIN 0x00000001
-
-/* Wait for TX queues to empty before proceeding with configuration. */
-#define MWL8K_WQ_TX_WAIT_EMPTY 0x00000002
-
-/* Queue request and return immediately. */
-#define MWL8K_WQ_POST_REQUEST 0x00000004
-
-/*
- * Caller sleeps and waits for task complete notification.
- * Do not use in atomic context.
- */
-#define MWL8K_WQ_SLEEP 0x00000008
-
-/* Free work struct when task is done. */
-#define MWL8K_WQ_FREE_WORKSTRUCT 0x00000010
-
-/*
- * Config request is queued and returns to caller imediately. Use
- * this in atomic context. Work struct is freed by mwl8k_queue_work()
- * when this flag is set.
- */
-#define MWL8K_WQ_QUEUE_ONLY (MWL8K_WQ_POST_REQUEST | \
- MWL8K_WQ_FREE_WORKSTRUCT)
-
-/* Default work queue behavior is to sleep and wait for tx completion. */
-#define MWL8K_WQ_DEFAULT_OPTIONS (MWL8K_WQ_SLEEP | MWL8K_WQ_TX_WAIT_EMPTY)
-
-/*
- * Default config request timeout. Add adjustments to make sure the
- * config thread waits long enough for both tx wait and cmd wait before
- * timing out.
- */
-
-/* Time to wait for all TXQs to drain. TX Doorbell is pressed each time. */
-#define MWL8K_TXWAIT_TIMEOUT_MS 1000
-
-/* Default number of TX wait attempts. */
-#define MWL8K_WQ_TXWAIT_ATTEMPTS 4
-
-/* Total time to wait for TXQ to drain. */
-#define MWL8K_TXWAIT_MS (MWL8K_TXWAIT_TIMEOUT_MS * \
- MWL8K_WQ_TXWAIT_ATTEMPTS)
-
-/* Scheduling slop. */
-#define MWL8K_OS_SCHEDULE_OVERHEAD_MS 200
-
-#define MWL8K_CONFIG_TIMEOUT_MS (MWL8K_CMD_TIMEOUT_MS + \
- MWL8K_TXWAIT_MS + \
- MWL8K_OS_SCHEDULE_OVERHEAD_MS)
-
-static void mwl8k_config_thread(struct work_struct *wt)
-{
- struct mwl8k_work_struct *worker = (struct mwl8k_work_struct *)wt;
- struct ieee80211_hw *hw = worker->hw;
- struct mwl8k_priv *priv = hw->priv;
- int rc = 0;
-
- spin_lock_irq(&priv->tx_lock);
- priv->inconfig = true;
- spin_unlock_irq(&priv->tx_lock);
-
- ieee80211_stop_queues(hw);
-
- /*
- * Wait for host queues to drain before doing PHY
- * reconfiguration. This avoids interrupting any in-flight
- * DMA transfers to the hardware.
- */
- if (worker->options & MWL8K_WQ_TX_WAIT_EMPTY) {
- u32 timeout;
- u32 time_remaining;
- u32 iter;
- u32 tx_wait_attempts = worker->txwait_attempts;
-
- time_remaining = worker->tx_timeout_ms;
- if (!tx_wait_attempts)
- tx_wait_attempts = 1;
-
- timeout = worker->tx_timeout_ms/tx_wait_attempts;
- if (!timeout)
- timeout = 1;
-
- iter = tx_wait_attempts;
- do {
- int wait_time;
-
- if (time_remaining > timeout) {
- time_remaining -= timeout;
- wait_time = timeout;
- } else
- wait_time = time_remaining;
-
- if (!wait_time)
- wait_time = 1;
-
- rc = mwl8k_tx_wait_empty(hw, wait_time);
- if (rc)
- printk(KERN_ERR "%s() txwait timeout=%ums "
- "Retry:%u/%u\n", __func__, timeout,
- tx_wait_attempts - iter + 1,
- tx_wait_attempts);
-
- } while (rc && --iter);
-
- rc = iter ? 0 : -ETIMEDOUT;
- }
- if (!rc)
- rc = worker->wfunc(wt);
-
- spin_lock_irq(&priv->tx_lock);
- priv->inconfig = false;
- if (priv->pending_tx_pkts && priv->radio_state)
- mwl8k_tx_start(priv);
- spin_unlock_irq(&priv->tx_lock);
- ieee80211_wake_queues(hw);
-
- worker->rc = rc;
- if (worker->options & MWL8K_WQ_SLEEP)
- complete(worker->cmd_wait);
-
- if (worker->options & MWL8K_WQ_FREE_WORKSTRUCT)
- kfree(wt);
-}
-
-static int mwl8k_queue_work(struct ieee80211_hw *hw,
- struct mwl8k_work_struct *worker,
- struct workqueue_struct *wqueue,
- int (*wfunc)(struct work_struct *w))
-{
- unsigned long timeout = 0;
- int rc = 0;
-
- DECLARE_COMPLETION_ONSTACK(cmd_wait);
-
- if (!worker->timeout_ms)
- worker->timeout_ms = MWL8K_CONFIG_TIMEOUT_MS;
-
- if (!worker->options)
- worker->options = MWL8K_WQ_DEFAULT_OPTIONS;
-
- if (!worker->txwait_attempts)
- worker->txwait_attempts = MWL8K_WQ_TXWAIT_ATTEMPTS;
-
- if (!worker->tx_timeout_ms)
- worker->tx_timeout_ms = MWL8K_TXWAIT_MS;
-
- worker->hw = hw;
- worker->cmd_wait = &cmd_wait;
- worker->rc = 1;
- worker->wfunc = wfunc;
-
- INIT_WORK(&worker->wt, mwl8k_config_thread);
- queue_work(wqueue, &worker->wt);
-
- if (worker->options & MWL8K_WQ_POST_REQUEST) {
- rc = 0;
- } else {
- if (worker->options & MWL8K_WQ_SPIN) {
- timeout = worker->timeout_ms;
- while (timeout && (worker->rc > 0)) {
- mdelay(1);
- timeout--;
- }
- } else if (worker->options & MWL8K_WQ_SLEEP)
- timeout = wait_for_completion_timeout(&cmd_wait,
- msecs_to_jiffies(worker->timeout_ms));
-
- if (timeout)
- rc = worker->rc;
- else {
- cancel_work_sync(&worker->wt);
- rc = -ETIMEDOUT;
- }
- }
-
- return rc;
-}
-
-struct mwl8k_start_worker {
- struct mwl8k_work_struct header;
-};
-
-static int mwl8k_start_wt(struct work_struct *wt)
-{
- struct mwl8k_start_worker *worker = (struct mwl8k_start_worker *)wt;
- struct ieee80211_hw *hw = worker->header.hw;
- struct mwl8k_priv *priv = hw->priv;
- int rc = 0;
-
- if (priv->vif != NULL) {
- rc = -EIO;
- goto mwl8k_start_exit;
- }
-
- /* Turn on radio */
- if (mwl8k_cmd_802_11_radio_control(hw, MWL8K_RADIO_ENABLE)) {
- rc = -EIO;
- goto mwl8k_start_exit;
- }
-
- /* Purge TX/RX HW queues */
- if (mwl8k_cmd_set_pre_scan(hw)) {
- rc = -EIO;
- goto mwl8k_start_exit;
- }
-
- if (mwl8k_cmd_set_post_scan(hw, "\x00\x00\x00\x00\x00\x00")) {
- rc = -EIO;
- goto mwl8k_start_exit;
- }
-
- /* Enable firmware rate adaptation */
- if (mwl8k_cmd_setrateadaptmode(hw, 0)) {
- rc = -EIO;
- goto mwl8k_start_exit;
- }
-
- /* Disable WMM. WMM gets enabled when stack sends WMM parms */
- if (mwl8k_set_wmm(hw, MWL8K_WMM_DISABLE)) {
- rc = -EIO;
- goto mwl8k_start_exit;
- }
-
- /* Disable sniffer mode */
- if (mwl8k_enable_sniffer(hw, 0))
- rc = -EIO;
-
-mwl8k_start_exit:
- return rc;
-}
-
static int mwl8k_start(struct ieee80211_hw *hw)
{
- struct mwl8k_start_worker *worker;
struct mwl8k_priv *priv = hw->priv;
int rc;
- /* Enable tx reclaim tasklet */
- tasklet_enable(&priv->tx_reclaim_task);
-
rc = request_irq(priv->pdev->irq, &mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
if (rc) {
printk(KERN_ERR "%s: failed to register IRQ handler\n",
priv->name);
- rc = -EIO;
- goto mwl8k_start_disable_tasklet;
+ return -EIO;
}
+ /* Enable tx reclaim tasklet */
+ tasklet_enable(&priv->tx_reclaim_task);
+
/* Enable interrupts */
- iowrite32(priv->int_mask, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
+ iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL) {
- rc = -ENOMEM;
- goto mwl8k_start_disable_irq;
+ rc = mwl8k_fw_lock(hw);
+ if (!rc) {
+ rc = mwl8k_cmd_802_11_radio_enable(hw);
+
+ if (!rc)
+ rc = mwl8k_cmd_set_pre_scan(hw);
+
+ if (!rc)
+ rc = mwl8k_cmd_set_post_scan(hw,
+ "\x00\x00\x00\x00\x00\x00");
+
+ if (!rc)
+ rc = mwl8k_cmd_setrateadaptmode(hw, 0);
+
+ if (!rc)
+ rc = mwl8k_set_wmm(hw, 0);
+
+ if (!rc)
+ rc = mwl8k_enable_sniffer(hw, 0);
+
+ mwl8k_fw_unlock(hw);
}
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq, mwl8k_start_wt);
- kfree(worker);
- if (!rc)
- return rc;
-
- if (rc == -ETIMEDOUT)
- printk(KERN_ERR "%s() timed out\n", __func__);
-
- rc = -EIO;
-
-mwl8k_start_disable_irq:
- spin_lock_irq(&priv->tx_lock);
- iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- spin_unlock_irq(&priv->tx_lock);
- free_irq(priv->pdev->irq, hw);
-
-mwl8k_start_disable_tasklet:
- tasklet_disable(&priv->tx_reclaim_task);
-
- return rc;
-}
-
-struct mwl8k_stop_worker {
- struct mwl8k_work_struct header;
-};
-
-static int mwl8k_stop_wt(struct work_struct *wt)
-{
- struct mwl8k_stop_worker *worker = (struct mwl8k_stop_worker *)wt;
- struct ieee80211_hw *hw = worker->header.hw;
- int rc;
-
- rc = mwl8k_cmd_802_11_radio_control(hw, MWL8K_RADIO_DISABLE);
+ if (rc) {
+ iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
+ free_irq(priv->pdev->irq, hw);
+ tasklet_disable(&priv->tx_reclaim_task);
+ }
return rc;
}
static void mwl8k_stop(struct ieee80211_hw *hw)
{
- int rc;
- struct mwl8k_stop_worker *worker;
struct mwl8k_priv *priv = hw->priv;
int i;
- if (priv->vif != NULL)
- return;
+ mwl8k_cmd_802_11_radio_disable(hw);
ieee80211_stop_queues(hw);
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL)
- return;
-
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq, mwl8k_stop_wt);
- kfree(worker);
- if (rc == -ETIMEDOUT)
- printk(KERN_ERR "%s() timed out\n", __func__);
-
/* Disable interrupts */
- spin_lock_irq(&priv->tx_lock);
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- spin_unlock_irq(&priv->tx_lock);
free_irq(priv->pdev->irq, hw);
/* Stop finalize join worker */
@@ -2978,8 +2523,7 @@
/*
* We only support managed interfaces for now.
*/
- if (conf->type != NL80211_IFTYPE_STATION &&
- conf->type != NL80211_IFTYPE_MONITOR)
+ if (conf->type != NL80211_IFTYPE_STATION)
return -EINVAL;
/* Clean out driver private area */
@@ -2987,13 +2531,13 @@
memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
/* Save the mac address */
- memcpy(mwl8k_vif->mac_addr, conf->mac_addr, IEEE80211_ADDR_LEN);
+ memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
/* Back pointer to parent config block */
mwl8k_vif->priv = priv;
/* Setup initial PHY parameters */
- memcpy(mwl8k_vif->legacy_rates ,
+ memcpy(mwl8k_vif->legacy_rates,
priv->rates, sizeof(mwl8k_vif->legacy_rates));
mwl8k_vif->legacy_nrates = ARRAY_SIZE(priv->rates);
@@ -3017,152 +2561,44 @@
priv->vif = NULL;
}
-struct mwl8k_config_worker {
- struct mwl8k_work_struct header;
- u32 changed;
-};
-
-static int mwl8k_config_wt(struct work_struct *wt)
+static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
{
- struct mwl8k_config_worker *worker =
- (struct mwl8k_config_worker *)wt;
- struct ieee80211_hw *hw = worker->header.hw;
struct ieee80211_conf *conf = &hw->conf;
struct mwl8k_priv *priv = hw->priv;
- int rc = 0;
+ int rc;
- if (!conf->radio_enabled) {
- mwl8k_cmd_802_11_radio_control(hw, MWL8K_RADIO_DISABLE);
+ if (conf->flags & IEEE80211_CONF_IDLE) {
+ mwl8k_cmd_802_11_radio_disable(hw);
priv->current_channel = NULL;
- rc = 0;
- goto mwl8k_config_exit;
+ return 0;
}
- if (mwl8k_cmd_802_11_radio_control(hw, MWL8K_RADIO_ENABLE)) {
- rc = -EINVAL;
- goto mwl8k_config_exit;
- }
+ rc = mwl8k_fw_lock(hw);
+ if (rc)
+ return rc;
+
+ rc = mwl8k_cmd_802_11_radio_enable(hw);
+ if (rc)
+ goto out;
+
+ rc = mwl8k_cmd_set_rf_channel(hw, conf->channel);
+ if (rc)
+ goto out;
priv->current_channel = conf->channel;
- if (mwl8k_cmd_set_rf_channel(hw, conf->channel)) {
- rc = -EINVAL;
- goto mwl8k_config_exit;
- }
-
if (conf->power_level > 18)
conf->power_level = 18;
- if (mwl8k_cmd_802_11_rf_tx_power(hw, conf->power_level)) {
- rc = -EINVAL;
- goto mwl8k_config_exit;
- }
+ rc = mwl8k_cmd_802_11_rf_tx_power(hw, conf->power_level);
+ if (rc)
+ goto out;
if (mwl8k_cmd_mimo_config(hw, 0x7, 0x7))
rc = -EINVAL;
-mwl8k_config_exit:
- return rc;
-}
+out:
+ mwl8k_fw_unlock(hw);
-static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
-{
- int rc = 0;
- struct mwl8k_config_worker *worker;
- struct mwl8k_priv *priv = hw->priv;
-
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL)
- return -ENOMEM;
-
- worker->changed = changed;
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq, mwl8k_config_wt);
- if (rc == -ETIMEDOUT) {
- printk(KERN_ERR "%s() timed out.\n", __func__);
- rc = -EINVAL;
- }
-
- kfree(worker);
-
- /*
- * mac80211 will crash on anything other than -EINVAL on
- * error. Looks like wireless extensions which calls mac80211
- * may be the actual culprit...
- */
- return rc ? -EINVAL : 0;
-}
-
-struct mwl8k_bss_info_changed_worker {
- struct mwl8k_work_struct header;
- struct ieee80211_vif *vif;
- struct ieee80211_bss_conf *info;
- u32 changed;
-};
-
-static int mwl8k_bss_info_changed_wt(struct work_struct *wt)
-{
- struct mwl8k_bss_info_changed_worker *worker =
- (struct mwl8k_bss_info_changed_worker *)wt;
- struct ieee80211_hw *hw = worker->header.hw;
- struct ieee80211_vif *vif = worker->vif;
- struct ieee80211_bss_conf *info = worker->info;
- u32 changed;
- int rc;
-
- struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif);
-
- changed = worker->changed;
- priv->capture_beacon = false;
-
- if (info->assoc) {
- memcpy(&mwl8k_vif->bss_info, info,
- sizeof(struct ieee80211_bss_conf));
-
- /* Install rates */
- if (mwl8k_update_rateset(hw, vif))
- goto mwl8k_bss_info_changed_exit;
-
- /* Turn on rate adaptation */
- if (mwl8k_cmd_use_fixed_rate(hw, MWL8K_USE_AUTO_RATE,
- MWL8K_UCAST_RATE, NULL))
- goto mwl8k_bss_info_changed_exit;
-
- /* Set radio preamble */
- if (mwl8k_set_radio_preamble(hw,
- info->use_short_preamble))
- goto mwl8k_bss_info_changed_exit;
-
- /* Set slot time */
- if (mwl8k_cmd_set_slot(hw, info->use_short_slot ?
- MWL8K_SHORT_SLOTTIME : MWL8K_LONG_SLOTTIME))
- goto mwl8k_bss_info_changed_exit;
-
- /* Update peer rate info */
- if (mwl8k_cmd_update_sta_db(hw, vif,
- MWL8K_STA_DB_MODIFY_ENTRY))
- goto mwl8k_bss_info_changed_exit;
-
- /* Set AID */
- if (mwl8k_cmd_set_aid(hw, vif))
- goto mwl8k_bss_info_changed_exit;
-
- /*
- * Finalize the join. Tell rx handler to process
- * next beacon from our BSSID.
- */
- memcpy(priv->capture_bssid,
- mwl8k_vif->bssid, IEEE80211_ADDR_LEN);
- priv->capture_beacon = true;
- } else {
- mwl8k_cmd_update_sta_db(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
- memset(&mwl8k_vif->bss_info, 0,
- sizeof(struct ieee80211_bss_conf));
- memset(mwl8k_vif->bssid, 0, IEEE80211_ADDR_LEN);
- }
-
-mwl8k_bss_info_changed_exit:
- rc = 0;
return rc;
}
@@ -3171,59 +2607,102 @@
struct ieee80211_bss_conf *info,
u32 changed)
{
- struct mwl8k_bss_info_changed_worker *worker;
struct mwl8k_priv *priv = hw->priv;
- struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
+ struct mwl8k_vif *mwl8k_vif = MWL8K_VIF(vif);
int rc;
if (changed & BSS_CHANGED_BSSID)
- memcpy(mv_vif->bssid, info->bssid, IEEE80211_ADDR_LEN);
+ memcpy(mwl8k_vif->bssid, info->bssid, ETH_ALEN);
if ((changed & BSS_CHANGED_ASSOC) == 0)
return;
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL)
+ priv->capture_beacon = false;
+
+ rc = mwl8k_fw_lock(hw);
+ if (rc)
return;
- worker->vif = vif;
- worker->info = info;
- worker->changed = changed;
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq,
- mwl8k_bss_info_changed_wt);
- kfree(worker);
- if (rc == -ETIMEDOUT)
- printk(KERN_ERR "%s() timed out\n", __func__);
+ if (info->assoc) {
+ memcpy(&mwl8k_vif->bss_info, info,
+ sizeof(struct ieee80211_bss_conf));
+
+ /* Install rates */
+ rc = mwl8k_update_rateset(hw, vif);
+ if (rc)
+ goto out;
+
+ /* Turn on rate adaptation */
+ rc = mwl8k_cmd_use_fixed_rate(hw, MWL8K_USE_AUTO_RATE,
+ MWL8K_UCAST_RATE, NULL);
+ if (rc)
+ goto out;
+
+ /* Set radio preamble */
+ rc = mwl8k_set_radio_preamble(hw, info->use_short_preamble);
+ if (rc)
+ goto out;
+
+ /* Set slot time */
+ rc = mwl8k_cmd_set_slot(hw, info->use_short_slot);
+ if (rc)
+ goto out;
+
+ /* Update peer rate info */
+ rc = mwl8k_cmd_update_sta_db(hw, vif,
+ MWL8K_STA_DB_MODIFY_ENTRY);
+ if (rc)
+ goto out;
+
+ /* Set AID */
+ rc = mwl8k_cmd_set_aid(hw, vif);
+ if (rc)
+ goto out;
+
+ /*
+ * Finalize the join. Tell rx handler to process
+ * next beacon from our BSSID.
+ */
+ memcpy(priv->capture_bssid, mwl8k_vif->bssid, ETH_ALEN);
+ priv->capture_beacon = true;
+ } else {
+ rc = mwl8k_cmd_update_sta_db(hw, vif, MWL8K_STA_DB_DEL_ENTRY);
+ memset(&mwl8k_vif->bss_info, 0,
+ sizeof(struct ieee80211_bss_conf));
+ memset(mwl8k_vif->bssid, 0, ETH_ALEN);
+ }
+
+out:
+ mwl8k_fw_unlock(hw);
}
-struct mwl8k_configure_filter_worker {
- struct mwl8k_work_struct header;
- unsigned int changed_flags;
- unsigned int *total_flags;
- int mc_count;
- struct dev_addr_list *mclist;
-};
-
-#define MWL8K_SUPPORTED_IF_FLAGS FIF_BCN_PRBRESP_PROMISC
-
-static int mwl8k_configure_filter_wt(struct work_struct *wt)
+static u64 mwl8k_prepare_multicast(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mclist)
{
- struct mwl8k_configure_filter_worker *worker =
- (struct mwl8k_configure_filter_worker *)wt;
+ struct mwl8k_cmd_pkt *cmd;
- struct ieee80211_hw *hw = worker->header.hw;
- unsigned int changed_flags = worker->changed_flags;
- unsigned int *total_flags = worker->total_flags;
- int mc_count = worker->mc_count;
- struct dev_addr_list *mclist = worker->mclist;
+ cmd = __mwl8k_cmd_mac_multicast_adr(hw, mc_count, mclist);
+ return (unsigned long)cmd;
+}
+
+static void mwl8k_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
struct mwl8k_priv *priv = hw->priv;
- int rc = 0;
+ struct mwl8k_cmd_pkt *multicast_adr_cmd;
+
+ /* Clear unsupported feature flags */
+ *total_flags &= FIF_BCN_PRBRESP_PROMISC;
+
+ if (mwl8k_fw_lock(hw))
+ return;
if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
- rc = mwl8k_cmd_set_pre_scan(hw);
+ mwl8k_cmd_set_pre_scan(hw);
else {
u8 *bssid;
@@ -3231,151 +2710,45 @@
if (priv->vif != NULL)
bssid = MWL8K_VIF(priv->vif)->bssid;
- rc = mwl8k_cmd_set_post_scan(hw, bssid);
+ mwl8k_cmd_set_post_scan(hw, bssid);
}
}
- if (rc)
- goto mwl8k_configure_filter_exit;
- if (mc_count) {
- mc_count = mc_count < priv->num_mcaddrs ?
- mc_count : priv->num_mcaddrs;
- rc = mwl8k_cmd_mac_multicast_adr(hw, mc_count, mclist);
- if (rc)
- printk(KERN_ERR
- "%s()Error setting multicast addresses\n",
- __func__);
+ multicast_adr_cmd = (void *)(unsigned long)multicast;
+ if (multicast_adr_cmd != NULL) {
+ mwl8k_post_cmd(hw, multicast_adr_cmd);
+ kfree(multicast_adr_cmd);
}
-mwl8k_configure_filter_exit:
- return rc;
-}
-
-static void mwl8k_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count,
- struct dev_addr_list *mclist)
-{
-
- struct mwl8k_configure_filter_worker *worker;
- struct mwl8k_priv *priv = hw->priv;
-
- /* Clear unsupported feature flags */
- *total_flags &= MWL8K_SUPPORTED_IF_FLAGS;
-
- if (!(changed_flags & MWL8K_SUPPORTED_IF_FLAGS) && !mc_count)
- return;
-
- worker = kzalloc(sizeof(*worker), GFP_ATOMIC);
- if (worker == NULL)
- return;
-
- worker->header.options = MWL8K_WQ_QUEUE_ONLY | MWL8K_WQ_TX_WAIT_EMPTY;
- worker->changed_flags = changed_flags;
- worker->total_flags = total_flags;
- worker->mc_count = mc_count;
- worker->mclist = mclist;
-
- mwl8k_queue_work(hw, &worker->header, priv->config_wq,
- mwl8k_configure_filter_wt);
-}
-
-struct mwl8k_set_rts_threshold_worker {
- struct mwl8k_work_struct header;
- u32 value;
-};
-
-static int mwl8k_set_rts_threshold_wt(struct work_struct *wt)
-{
- struct mwl8k_set_rts_threshold_worker *worker =
- (struct mwl8k_set_rts_threshold_worker *)wt;
-
- struct ieee80211_hw *hw = worker->header.hw;
- u16 threshold = (u16)(worker->value);
- int rc;
-
- rc = mwl8k_rts_threshold(hw, MWL8K_CMD_SET, &threshold);
-
- return rc;
+ mwl8k_fw_unlock(hw);
}
static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
- int rc;
- struct mwl8k_set_rts_threshold_worker *worker;
- struct mwl8k_priv *priv = hw->priv;
-
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL)
- return -ENOMEM;
-
- worker->value = value;
-
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq,
- mwl8k_set_rts_threshold_wt);
- kfree(worker);
-
- if (rc == -ETIMEDOUT) {
- printk(KERN_ERR "%s() timed out\n", __func__);
- rc = -EINVAL;
- }
-
- return rc;
-}
-
-struct mwl8k_conf_tx_worker {
- struct mwl8k_work_struct header;
- u16 queue;
- const struct ieee80211_tx_queue_params *params;
-};
-
-static int mwl8k_conf_tx_wt(struct work_struct *wt)
-{
- struct mwl8k_conf_tx_worker *worker =
- (struct mwl8k_conf_tx_worker *)wt;
-
- struct ieee80211_hw *hw = worker->header.hw;
- u16 queue = worker->queue;
- const struct ieee80211_tx_queue_params *params = worker->params;
-
- struct mwl8k_priv *priv = hw->priv;
- int rc = 0;
-
- if (priv->wmm_mode == MWL8K_WMM_DISABLE)
- if (mwl8k_set_wmm(hw, MWL8K_WMM_ENABLE)) {
- rc = -EINVAL;
- goto mwl8k_conf_tx_exit;
- }
-
- if (mwl8k_set_edca_params(hw, GET_TXQ(queue), params->cw_min,
- params->cw_max, params->aifs, params->txop))
- rc = -EINVAL;
-mwl8k_conf_tx_exit:
- return rc;
+ return mwl8k_rts_threshold(hw, MWL8K_CMD_SET, value);
}
static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
- int rc;
- struct mwl8k_conf_tx_worker *worker;
struct mwl8k_priv *priv = hw->priv;
+ int rc;
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL)
- return -ENOMEM;
+ rc = mwl8k_fw_lock(hw);
+ if (!rc) {
+ if (!priv->wmm_enabled)
+ rc = mwl8k_set_wmm(hw, 1);
- worker->queue = queue;
- worker->params = params;
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq, mwl8k_conf_tx_wt);
- kfree(worker);
- if (rc == -ETIMEDOUT) {
- printk(KERN_ERR "%s() timed out\n", __func__);
- rc = -EINVAL;
+ if (!rc)
+ rc = mwl8k_set_edca_params(hw, queue,
+ params->cw_min,
+ params->cw_max,
+ params->aifs,
+ params->txop);
+
+ mwl8k_fw_unlock(hw);
}
+
return rc;
}
@@ -3393,44 +2766,14 @@
sizeof(struct ieee80211_tx_queue_stats));
}
spin_unlock_bh(&priv->tx_lock);
+
return 0;
}
-struct mwl8k_get_stats_worker {
- struct mwl8k_work_struct header;
- struct ieee80211_low_level_stats *stats;
-};
-
-static int mwl8k_get_stats_wt(struct work_struct *wt)
-{
- struct mwl8k_get_stats_worker *worker =
- (struct mwl8k_get_stats_worker *)wt;
-
- return mwl8k_cmd_802_11_get_stat(worker->header.hw, worker->stats);
-}
-
static int mwl8k_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
- int rc;
- struct mwl8k_get_stats_worker *worker;
- struct mwl8k_priv *priv = hw->priv;
-
- worker = kzalloc(sizeof(*worker), GFP_KERNEL);
- if (worker == NULL)
- return -ENOMEM;
-
- worker->stats = stats;
- rc = mwl8k_queue_work(hw, &worker->header,
- priv->config_wq, mwl8k_get_stats_wt);
-
- kfree(worker);
- if (rc == -ETIMEDOUT) {
- printk(KERN_ERR "%s() timed out\n", __func__);
- rc = -EINVAL;
- }
-
- return rc;
+ return mwl8k_cmd_802_11_get_stat(hw, stats);
}
static const struct ieee80211_ops mwl8k_ops = {
@@ -3441,6 +2784,7 @@
.remove_interface = mwl8k_remove_interface,
.config = mwl8k_config,
.bss_info_changed = mwl8k_bss_info_changed,
+ .prepare_multicast = mwl8k_prepare_multicast,
.configure_filter = mwl8k_configure_filter,
.set_rts_threshold = mwl8k_set_rts_threshold,
.conf_tx = mwl8k_conf_tx,
@@ -3458,12 +2802,9 @@
for (i = 0; i < MWL8K_TX_QUEUES; i++)
mwl8k_txq_reclaim(hw, i, 0);
- if (priv->tx_wait != NULL) {
- int count = mwl8k_txq_busy(priv);
- if (count == 0) {
- complete(priv->tx_wait);
- priv->tx_wait = NULL;
- }
+ if (priv->tx_wait != NULL && mwl8k_txq_busy(priv) == 0) {
+ complete(priv->tx_wait);
+ priv->tx_wait = NULL;
}
spin_unlock_bh(&priv->tx_lock);
}
@@ -3473,7 +2814,7 @@
struct mwl8k_priv *priv =
container_of(work, struct mwl8k_priv, finalize_join_worker);
struct sk_buff *skb = priv->beacon_skb;
- u8 dtim = (MWL8K_VIF(priv->vif))->bss_info.dtim_period;
+ u8 dtim = MWL8K_VIF(priv->vif)->bss_info.dtim_period;
mwl8k_finalize_join(priv->hw, skb->data, skb->len, dtim);
dev_kfree_skb(skb);
@@ -3484,12 +2825,16 @@
static int __devinit mwl8k_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ static int printed_version = 0;
struct ieee80211_hw *hw;
struct mwl8k_priv *priv;
- DECLARE_MAC_BUF(mac);
int rc;
int i;
- u8 *fw;
+
+ if (!printed_version) {
+ printk(KERN_INFO "%s version %s\n", MWL8K_DESC, MWL8K_VERSION);
+ printed_version = 1;
+ }
rc = pci_enable_device(pdev);
if (rc) {
@@ -3517,16 +2862,10 @@
priv = hw->priv;
priv->hw = hw;
priv->pdev = pdev;
- priv->hostcmd_wait = NULL;
- priv->tx_wait = NULL;
- priv->inconfig = false;
- priv->wep_enabled = 0;
- priv->wmm_mode = false;
+ priv->wmm_enabled = false;
priv->pending_tx_pkts = 0;
strncpy(priv->name, MWL8K_NAME, sizeof(priv->name));
- spin_lock_init(&priv->fw_lock);
-
SET_IEEE80211_DEV(hw, &pdev->dev);
pci_set_drvdata(pdev, hw);
@@ -3558,17 +2897,16 @@
hw->queues = MWL8K_TX_QUEUES;
- hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_MONITOR);
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
/* Set rssi and noise values to dBm */
- hw->flags |= (IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM);
+ hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
hw->vif_data_size = sizeof(struct mwl8k_vif);
priv->vif = NULL;
/* Set default radio state and preamble */
- priv->radio_preamble = MWL8K_RADIO_DEFAULT_PREAMBLE;
- priv->radio_state = MWL8K_RADIO_DISABLE;
+ priv->radio_on = 0;
+ priv->radio_short_preamble = 0;
/* Finalize join worker */
INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
@@ -3593,6 +2931,12 @@
goto err_iounmap;
rxq_refill(hw, 0, INT_MAX);
+ mutex_init(&priv->fw_mutex);
+ priv->fw_mutex_owner = NULL;
+ priv->fw_mutex_depth = 0;
+ priv->tx_wait = NULL;
+ priv->hostcmd_wait = NULL;
+
spin_lock_init(&priv->tx_lock);
for (i = 0; i < MWL8K_TX_QUEUES; i++) {
@@ -3602,8 +2946,7 @@
}
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS);
- priv->int_mask = 0;
- iowrite32(priv->int_mask, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
+ iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL);
iowrite32(0xffffffff, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
@@ -3640,9 +2983,7 @@
* commands use interrupts and avoids polling. Disable
* interrupts when done.
*/
- priv->int_mask |= MWL8K_A2H_EVENTS;
-
- iowrite32(priv->int_mask, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
+ iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
/* Get config data, mac addrs etc */
rc = mwl8k_cmd_get_hw_spec(hw);
@@ -3652,16 +2993,14 @@
}
/* Turn radio off */
- rc = mwl8k_cmd_802_11_radio_control(hw, MWL8K_RADIO_DISABLE);
+ rc = mwl8k_cmd_802_11_radio_disable(hw);
if (rc) {
printk(KERN_ERR "%s: Cannot disable\n", priv->name);
goto err_stop_firmware;
}
/* Disable interrupts */
- spin_lock_irq(&priv->tx_lock);
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- spin_unlock_irq(&priv->tx_lock);
free_irq(priv->pdev->irq, hw);
rc = ieee80211_register_hw(hw);
@@ -3670,13 +3009,11 @@
goto err_stop_firmware;
}
- fw = (u8 *)&priv->fw_rev;
- printk(KERN_INFO "%s: 88W%u %s\n", priv->name, priv->part_num,
- MWL8K_DESC);
- printk(KERN_INFO "%s: Driver Ver:%s Firmware Ver:%u.%u.%u.%u\n",
- priv->name, MWL8K_VERSION, fw[3], fw[2], fw[1], fw[0]);
- printk(KERN_INFO "%s: MAC Address: %s\n", priv->name,
- print_mac(mac, hw->wiphy->perm_addr));
+ printk(KERN_INFO "%s: 88w%u v%d, %pM, firmware version %u.%u.%u.%u\n",
+ wiphy_name(hw->wiphy), priv->part_num, priv->hw_rev,
+ hw->wiphy->perm_addr,
+ (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
+ (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
return 0;
@@ -3685,9 +3022,7 @@
mwl8k_release_firmware(priv);
err_free_irq:
- spin_lock_irq(&priv->tx_lock);
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- spin_unlock_irq(&priv->tx_lock);
free_irq(priv->pdev->irq, hw);
err_free_queues:
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index d63c899..9498b46 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -203,7 +203,8 @@
static int netwave_close(struct net_device *dev); /* Close the device */
/* Packet transmission and Packet reception */
-static int netwave_start_xmit( struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t netwave_start_xmit( struct sk_buff *skb,
+ struct net_device *dev);
static int netwave_rx( struct net_device *dev);
/* Interrupt routines */
@@ -1026,7 +1027,8 @@
return 0;
}
-static int netwave_start_xmit(struct sk_buff *skb, struct net_device *dev) {
+static netdev_tx_t netwave_start_xmit(struct sk_buff *skb,
+ struct net_device *dev) {
/* This flag indicate that the hardware can't perform a transmission.
* Theoritically, NET3 check it before sending a packet to the driver,
* but in fact it never do that and pool continuously.
@@ -1047,7 +1049,7 @@
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
} /* netwave_start_xmit */
/*
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index 44411eb..83b635f 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -1,6 +1,7 @@
config HERMES
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
+ depends on CFG80211
select WIRELESS_EXT
select FW_LOADER
select CRYPTO
diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile
index 1fc7409..9abd632 100644
--- a/drivers/net/wireless/orinoco/Makefile
+++ b/drivers/net/wireless/orinoco/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the orinoco wireless device drivers.
#
-orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o
+orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o
obj-$(CONFIG_HERMES) += orinoco.o
obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
index 8c4065f..c60df2c 100644
--- a/drivers/net/wireless/orinoco/airport.c
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -27,6 +27,7 @@
struct airport {
struct macio_dev *mdev;
void __iomem *vaddr;
+ unsigned int irq;
int irq_requested;
int ndev_registered;
};
@@ -34,8 +35,9 @@
static int
airport_suspend(struct macio_dev *mdev, pm_message_t state)
{
- struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
+ struct net_device *dev = priv->ndev;
+ struct airport *card = priv->card;
unsigned long flags;
int err;
@@ -48,18 +50,10 @@
return 0;
}
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
-
- priv->hw_unavailable++;
-
+ orinoco_down(priv);
orinoco_unlock(priv, &flags);
- disable_irq(dev->irq);
+ disable_irq(card->irq);
pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
macio_get_of_node(mdev), 0, 0);
@@ -69,8 +63,9 @@
static int
airport_resume(struct macio_dev *mdev)
{
- struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
+ struct net_device *dev = priv->ndev;
+ struct airport *card = priv->card;
unsigned long flags;
int err;
@@ -80,47 +75,27 @@
macio_get_of_node(mdev), 0, 1);
msleep(200);
- enable_irq(dev->irq);
-
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n",
- dev->name, err);
- return 0;
- }
+ enable_irq(card->irq);
spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
-
- priv->hw_unavailable--;
-
- if (priv->open && (!priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n",
- dev->name, err);
- }
-
-
+ err = orinoco_up(priv);
spin_unlock_irqrestore(&priv->lock, flags);
- return 0;
+ return err;
}
static int
airport_detach(struct macio_dev *mdev)
{
- struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
struct airport *card = priv->card;
if (card->ndev_registered)
- unregister_netdev(dev);
+ orinoco_if_del(priv);
card->ndev_registered = 0;
if (card->irq_requested)
- free_irq(dev->irq, dev);
+ free_irq(card->irq, priv);
card->irq_requested = 0;
if (card->vaddr)
@@ -134,7 +109,7 @@
ssleep(1);
macio_set_drvdata(mdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
return 0;
}
@@ -146,7 +121,6 @@
* re-initialize properly, it falls in a screaming heap
* shortly afterwards. */
#if 0
- struct net_device *dev = priv->ndev;
struct airport *card = priv->card;
/* Vitally important. If we don't do this it seems we get an
@@ -154,7 +128,7 @@
* hw_unavailable is already set it doesn't get ACKed, we get
* into an interrupt loop and the PMU decides to turn us
* off. */
- disable_irq(dev->irq);
+ disable_irq(card->irq);
pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
macio_get_of_node(card->mdev), 0, 0);
@@ -163,7 +137,7 @@
macio_get_of_node(card->mdev), 0, 1);
ssleep(1);
- enable_irq(dev->irq);
+ enable_irq(card->irq);
ssleep(1);
#endif
@@ -174,7 +148,6 @@
airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
struct orinoco_private *priv;
- struct net_device *dev;
struct airport *card;
unsigned long phys_addr;
hermes_t *hw;
@@ -185,33 +158,29 @@
}
/* Allocate space for private device-specific data */
- dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
- airport_hard_reset, NULL);
- if (!dev) {
+ priv = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
+ airport_hard_reset, NULL);
+ if (!priv) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
return -ENODEV;
}
- priv = netdev_priv(dev);
card = priv->card;
hw = &priv->hw;
card->mdev = mdev;
- if (macio_request_resource(mdev, 0, "airport")) {
+ if (macio_request_resource(mdev, 0, DRIVER_NAME)) {
printk(KERN_ERR PFX "can't request IO resource !\n");
- free_orinocodev(dev);
+ free_orinocodev(priv);
return -EBUSY;
}
- SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
-
- macio_set_drvdata(mdev, dev);
+ macio_set_drvdata(mdev, priv);
/* Setup interrupts & base address */
- dev->irq = macio_irq(mdev, 0);
+ card->irq = macio_irq(mdev, 0);
phys_addr = macio_resource_start(mdev, 0); /* Physical address */
printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
- dev->base_addr = phys_addr;
card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
if (!card->vaddr) {
printk(KERN_ERR PFX "ioremap() failed\n");
@@ -228,18 +197,23 @@
/* Reset it before we get the interrupt */
hermes_init(hw);
- if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) {
- printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq);
+ if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) {
+ printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq);
goto failed;
}
card->irq_requested = 1;
- /* Tell the stack we exist */
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR PFX "register_netdev() failed\n");
+ /* Initialise the main driver */
+ if (orinoco_init(priv) != 0) {
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
goto failed;
}
- printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name);
+
+ /* Register an interface with the stack */
+ if (orinoco_if_add(priv, phys_addr, card->irq) != 0) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
+ goto failed;
+ }
card->ndev_registered = 1;
return 0;
failed:
diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c
new file mode 100644
index 0000000..27f2d33
--- /dev/null
+++ b/drivers/net/wireless/orinoco/cfg.c
@@ -0,0 +1,203 @@
+/* cfg80211 support
+ *
+ * See copyright notice in main.c
+ */
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "hw.h"
+#include "main.h"
+#include "orinoco.h"
+
+#include "cfg.h"
+
+/* Supported bitrates. Must agree with hw.c */
+static struct ieee80211_rate orinoco_rates[] = {
+ { .bitrate = 10 },
+ { .bitrate = 20 },
+ { .bitrate = 55 },
+ { .bitrate = 110 },
+};
+
+static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid;
+
+/* Called after orinoco_private is allocated. */
+void orinoco_wiphy_init(struct wiphy *wiphy)
+{
+ struct orinoco_private *priv = wiphy_priv(wiphy);
+
+ wiphy->privid = orinoco_wiphy_privid;
+
+ set_wiphy_dev(wiphy, priv->dev);
+}
+
+/* Called after firmware is initialised */
+int orinoco_wiphy_register(struct wiphy *wiphy)
+{
+ struct orinoco_private *priv = wiphy_priv(wiphy);
+ int i, channels = 0;
+
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+ wiphy->max_scan_ssids = 1;
+ else
+ wiphy->max_scan_ssids = 0;
+
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+ /* TODO: should we set if we only have demo ad-hoc?
+ * (priv->has_port3)
+ */
+ if (priv->has_ibss)
+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+
+ if (!priv->broken_monitor || force_monitor)
+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+
+ priv->band.bitrates = orinoco_rates;
+ priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates);
+
+ /* Only support channels allowed by the card EEPROM */
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (priv->channel_mask & (1 << i)) {
+ priv->channels[i].center_freq =
+ ieee80211_dsss_chan_to_freq(i+1);
+ channels++;
+ }
+ }
+ priv->band.channels = priv->channels;
+ priv->band.n_channels = channels;
+
+ wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+ i = 0;
+ if (priv->has_wep) {
+ priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40;
+ i++;
+
+ if (priv->has_big_wep) {
+ priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104;
+ i++;
+ }
+ }
+ if (priv->has_wpa) {
+ priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP;
+ i++;
+ }
+ wiphy->cipher_suites = priv->cipher_suites;
+ wiphy->n_cipher_suites = i;
+
+ wiphy->rts_threshold = priv->rts_thresh;
+ if (!priv->has_mwo)
+ wiphy->frag_threshold = priv->frag_thresh;
+
+ return wiphy_register(wiphy);
+}
+
+static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev,
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params)
+{
+ struct orinoco_private *priv = wiphy_priv(wiphy);
+ int err = 0;
+ unsigned long lock;
+
+ if (orinoco_lock(priv, &lock) != 0)
+ return -EBUSY;
+
+ switch (type) {
+ case NL80211_IFTYPE_ADHOC:
+ if (!priv->has_ibss && !priv->has_port3)
+ err = -EINVAL;
+ break;
+
+ case NL80211_IFTYPE_STATION:
+ break;
+
+ case NL80211_IFTYPE_MONITOR:
+ if (priv->broken_monitor && !force_monitor) {
+ printk(KERN_WARNING "%s: Monitor mode support is "
+ "buggy in this firmware, not enabling\n",
+ wiphy_name(wiphy));
+ err = -EINVAL;
+ }
+ break;
+
+ default:
+ err = -EINVAL;
+ }
+
+ if (!err) {
+ priv->iw_mode = type;
+ set_port_type(priv);
+ err = orinoco_commit(priv);
+ }
+
+ orinoco_unlock(priv, &lock);
+
+ return err;
+}
+
+static int orinoco_scan(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_scan_request *request)
+{
+ struct orinoco_private *priv = wiphy_priv(wiphy);
+ int err;
+
+ if (!request)
+ return -EINVAL;
+
+ if (priv->scan_request && priv->scan_request != request)
+ return -EBUSY;
+
+ priv->scan_request = request;
+
+ err = orinoco_hw_trigger_scan(priv, request->ssids);
+
+ return err;
+}
+
+static int orinoco_set_channel(struct wiphy *wiphy,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type)
+{
+ struct orinoco_private *priv = wiphy_priv(wiphy);
+ int err = 0;
+ unsigned long flags;
+ int channel;
+
+ if (!chan)
+ return -EINVAL;
+
+ if (channel_type != NL80211_CHAN_NO_HT)
+ return -EINVAL;
+
+ if (chan->band != IEEE80211_BAND_2GHZ)
+ return -EINVAL;
+
+ channel = ieee80211_freq_to_dsss_chan(chan->center_freq);
+
+ if ((channel < 1) || (channel > NUM_CHANNELS) ||
+ !(priv->channel_mask & (1 << (channel-1))))
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->channel = channel;
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
+ /* Fast channel change - no commit if successful */
+ hermes_t *hw = &priv->hw;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_SET_CHANNEL,
+ channel, NULL);
+ }
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+const struct cfg80211_ops orinoco_cfg_ops = {
+ .change_virtual_intf = orinoco_change_vif,
+ .set_channel = orinoco_set_channel,
+ .scan = orinoco_scan,
+};
diff --git a/drivers/net/wireless/orinoco/cfg.h b/drivers/net/wireless/orinoco/cfg.h
new file mode 100644
index 0000000..3ddc96a
--- /dev/null
+++ b/drivers/net/wireless/orinoco/cfg.h
@@ -0,0 +1,15 @@
+/* cfg80211 support.
+ *
+ * See copyright notice in main.c
+ */
+#ifndef ORINOCO_CFG_H
+#define ORINOCO_CFG_H
+
+#include <net/cfg80211.h>
+
+extern const struct cfg80211_ops orinoco_cfg_ops;
+
+void orinoco_wiphy_init(struct wiphy *wiphy);
+int orinoco_wiphy_register(struct wiphy *wiphy);
+
+#endif /* ORINOCO_CFG_H */
diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c
index 1084b43..1257250 100644
--- a/drivers/net/wireless/orinoco/fw.c
+++ b/drivers/net/wireless/orinoco/fw.c
@@ -4,6 +4,7 @@
*/
#include <linux/kernel.h>
#include <linux/firmware.h>
+#include <linux/device.h>
#include "hermes.h"
#include "hermes_dld.h"
@@ -99,7 +100,7 @@
const void *end;
const char *firmware;
const char *fw_err;
- struct net_device *dev = priv->ndev;
+ struct device *dev = priv->dev;
int err = 0;
pda = kzalloc(fw->pda_size, GFP_KERNEL);
@@ -111,12 +112,11 @@
else
firmware = fw->sta_fw;
- printk(KERN_DEBUG "%s: Attempting to download firmware %s\n",
- dev->name, firmware);
+ dev_dbg(dev, "Attempting to download firmware %s\n", firmware);
/* Read current plug data */
err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
- printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err);
+ dev_dbg(dev, "Read PDA returned %d\n", err);
if (err)
goto free;
@@ -124,8 +124,7 @@
err = request_firmware(&fw_entry, firmware, priv->dev);
if (err) {
- printk(KERN_ERR "%s: Cannot find firmware %s\n",
- dev->name, firmware);
+ dev_err(dev, "Cannot find firmware %s\n", firmware);
err = -ENOENT;
goto free;
}
@@ -136,16 +135,15 @@
fw_err = validate_fw(hdr, fw_entry->size);
if (fw_err) {
- printk(KERN_WARNING "%s: Invalid firmware image detected (%s). "
- "Aborting download\n",
- dev->name, fw_err);
+ dev_warn(dev, "Invalid firmware image detected (%s). "
+ "Aborting download\n", fw_err);
err = -EINVAL;
goto abort;
}
/* Enable aux port to allow programming */
err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
- printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err);
+ dev_dbg(dev, "Program init returned %d\n", err);
if (err != 0)
goto abort;
@@ -156,7 +154,7 @@
end = fw_entry->data + fw_entry->size;
err = hermes_program(hw, first_block, end);
- printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err);
+ dev_dbg(dev, "Program returned %d\n", err);
if (err != 0)
goto abort;
@@ -167,19 +165,18 @@
err = hermes_apply_pda_with_defaults(hw, first_block, end, pda,
&pda[fw->pda_size / sizeof(*pda)]);
- printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err);
+ dev_dbg(dev, "Apply PDA returned %d\n", err);
if (err)
goto abort;
/* Tell card we've finished */
err = hermesi_program_end(hw);
- printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err);
+ dev_dbg(dev, "Program end returned %d\n", err);
if (err != 0)
goto abort;
/* Check if we're running */
- printk(KERN_DEBUG "%s: hermes_present returned %d\n",
- dev->name, hermes_present(hw));
+ dev_dbg(dev, "hermes_present returned %d\n", hermes_present(hw));
abort:
/* If we requested the firmware, release it. */
@@ -282,14 +279,13 @@
symbol_dl_firmware(struct orinoco_private *priv,
const struct fw_info *fw)
{
- struct net_device *dev = priv->ndev;
+ struct device *dev = priv->dev;
int ret;
const struct firmware *fw_entry;
if (!orinoco_cached_fw_get(priv, true)) {
if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) {
- printk(KERN_ERR "%s: Cannot find firmware: %s\n",
- dev->name, fw->pri_fw);
+ dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw);
return -ENOENT;
}
} else
@@ -302,15 +298,13 @@
if (!orinoco_cached_fw_get(priv, true))
release_firmware(fw_entry);
if (ret) {
- printk(KERN_ERR "%s: Primary firmware download failed\n",
- dev->name);
+ dev_err(dev, "Primary firmware download failed\n");
return ret;
}
if (!orinoco_cached_fw_get(priv, false)) {
if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) {
- printk(KERN_ERR "%s: Cannot find firmware: %s\n",
- dev->name, fw->sta_fw);
+ dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw);
return -ENOENT;
}
} else
@@ -322,8 +316,7 @@
if (!orinoco_cached_fw_get(priv, false))
release_firmware(fw_entry);
if (ret) {
- printk(KERN_ERR "%s: Secondary firmware download failed\n",
- dev->name);
+ dev_err(dev, "Secondary firmware download failed\n");
}
return ret;
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c
index f2c918c..1a2fca7 100644
--- a/drivers/net/wireless/orinoco/hermes.c
+++ b/drivers/net/wireless/orinoco/hermes.c
@@ -469,7 +469,7 @@
u16 rlength, rtype;
unsigned nwords;
- if ((bufsize < 0) || (bufsize % 2))
+ if (bufsize % 2)
return -EINVAL;
err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h
index c78c442..2dddbb5 100644
--- a/drivers/net/wireless/orinoco/hermes.h
+++ b/drivers/net/wireless/orinoco/hermes.h
@@ -342,7 +342,7 @@
__le64 timestamp;
__le16 beacon_interval;
__le16 capabilities;
- u8 data[316];
+ u8 data[0];
} __attribute__ ((packed));
#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index a9ba195..a3eefe1 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -309,7 +309,7 @@
/* Open auxiliary port */
ret = hermes_aux_control(hw, 1);
- printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret);
+ pr_debug(PFX "AUX enable returned %d\n", ret);
if (ret)
return ret;
@@ -319,12 +319,12 @@
/* Close aux port */
ret = hermes_aux_control(hw, 0);
- printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret);
+ pr_debug(PFX "AUX disable returned %d\n", ret);
/* Check PDA length */
pda_size = le16_to_cpu(pda[0]);
- printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n",
- pda_size, pda_len);
+ pr_debug(PFX "Actual PDA length %d, Max allowed %d\n",
+ pda_size, pda_len);
if (pda_size > pda_len)
return -EINVAL;
@@ -422,20 +422,19 @@
return err;
err = hermes_aux_control(hw, 1);
- printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
+ pr_debug(PFX "AUX enable returned %d\n", err);
if (err)
return err;
- printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+ pr_debug(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
err = hermes_doicmd_wait(hw,
HERMES_PROGRAM_ENABLE_VOLATILE,
offset & 0xFFFFu,
offset >> 16,
0,
NULL);
- printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
- err);
+ pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err);
return err;
}
@@ -454,16 +453,16 @@
rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
- printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
- "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
- rc, resp.resp0, resp.resp1, resp.resp2);
+ pr_debug(PFX "PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
if ((rc == 0) &&
((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
rc = -EIO;
err = hermes_aux_control(hw, 0);
- printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
+ pr_debug(PFX "AUX disable returned %d\n", err);
/* Acknowledge any outstanding command */
hermes_write_regn(hw, EVACK, 0xFFFF);
@@ -496,9 +495,8 @@
while ((blkaddr != BLOCK_END) &&
(((void *) blk + blklen) <= end)) {
- printk(KERN_DEBUG PFX
- "Programming block of length %d to address 0x%08x\n",
- blklen, blkaddr);
+ pr_debug(PFX "Programming block of length %d "
+ "to address 0x%08x\n", blklen, blkaddr);
#if !LIMIT_PROGRAM_SIZE
/* wl_lkm driver splits this into writes of 2000 bytes */
@@ -510,10 +508,9 @@
addr = blkaddr;
while (addr < (blkaddr + blklen)) {
- printk(KERN_DEBUG PFX
- "Programming subblock of length %d "
- "to address 0x%08x. Data @ %p\n",
- len, addr, &blk->data[addr - blkaddr]);
+ pr_debug(PFX "Programming subblock of length %d "
+ "to address 0x%08x. Data @ %p\n",
+ len, addr, &blk->data[addr - blkaddr]);
hermes_aux_setaddr(hw, addr);
hermes_write_bytes(hw, HERMES_AUXDATA,
@@ -643,8 +640,8 @@
pdi = hermes_find_pdi(first_pdi, record_id, pda_end);
if (pdi)
- printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
- record_id, pdi);
+ pr_debug(PFX "Found record 0x%04x at %p\n",
+ record_id, pdi);
switch (record_id) {
case 0x110: /* Modem REFDAC values */
@@ -654,9 +651,9 @@
default_pdi = NULL;
if (outdoor_pdi) {
pdi = outdoor_pdi;
- printk(KERN_DEBUG PFX
- "Using outdoor record 0x%04x at %p\n",
- record_id + 1, pdi);
+ pr_debug(PFX
+ "Using outdoor record 0x%04x at %p\n",
+ record_id + 1, pdi);
}
break;
case 0x5: /* HWIF Compatiblity */
@@ -684,9 +681,8 @@
if (!pdi && default_pdi) {
/* Use default */
pdi = default_pdi;
- printk(KERN_DEBUG PFX
- "Using default record 0x%04x at %p\n",
- record_id, pdi);
+ pr_debug(PFX "Using default record 0x%04x at %p\n",
+ record_id, pdi);
}
if (pdi) {
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index 632fac8..359652d 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -3,16 +3,22 @@
* See copyright notice in main.c
*/
#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/if_arp.h>
#include <linux/ieee80211.h>
#include <linux/wireless.h>
-
+#include <net/cfg80211.h>
#include "hermes.h"
#include "hermes_rid.h"
#include "orinoco.h"
#include "hw.h"
+#define SYMBOL_MAX_VER_LEN (14)
+
+/* Symbol firmware has a bug allocating buffers larger than this */
+#define TX_NICBUF_SIZE_BUG 1585
+
/********************************************************************/
/* Data tables */
/********************************************************************/
@@ -36,6 +42,343 @@
};
#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
+/* Firmware version encoding */
+struct comp_id {
+ u16 id, variant, major, minor;
+} __attribute__ ((packed));
+
+static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
+{
+ if (nic_id->id < 0x8000)
+ return FIRMWARE_TYPE_AGERE;
+ else if (nic_id->id == 0x8000 && nic_id->major == 0)
+ return FIRMWARE_TYPE_SYMBOL;
+ else
+ return FIRMWARE_TYPE_INTERSIL;
+}
+
+/* Set priv->firmware type, determine firmware properties
+ * This function can be called before we have registerred with netdev,
+ * so all errors go out with dev_* rather than printk
+ */
+int determine_fw_capabilities(struct orinoco_private *priv)
+{
+ struct device *dev = priv->dev;
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct comp_id nic_id, sta_id;
+ unsigned int firmver;
+ char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
+
+ /* Get the hardware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
+ if (err) {
+ dev_err(dev, "Cannot read hardware identity: error %d\n",
+ err);
+ return err;
+ }
+
+ le16_to_cpus(&nic_id.id);
+ le16_to_cpus(&nic_id.variant);
+ le16_to_cpus(&nic_id.major);
+ le16_to_cpus(&nic_id.minor);
+ dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n",
+ nic_id.id, nic_id.variant, nic_id.major, nic_id.minor);
+
+ priv->firmware_type = determine_firmware_type(&nic_id);
+
+ /* Get the firmware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
+ if (err) {
+ dev_err(dev, "Cannot read station identity: error %d\n",
+ err);
+ return err;
+ }
+
+ le16_to_cpus(&sta_id.id);
+ le16_to_cpus(&sta_id.variant);
+ le16_to_cpus(&sta_id.major);
+ le16_to_cpus(&sta_id.minor);
+ dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n",
+ sta_id.id, sta_id.variant, sta_id.major, sta_id.minor);
+
+ switch (sta_id.id) {
+ case 0x15:
+ dev_err(dev, "Primary firmware is active\n");
+ return -ENODEV;
+ case 0x14b:
+ dev_err(dev, "Tertiary firmware is active\n");
+ return -ENODEV;
+ case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
+ case 0x21: /* Symbol Spectrum24 Trilogy */
+ break;
+ default:
+ dev_notice(dev, "Unknown station ID, please report\n");
+ break;
+ }
+
+ /* Default capabilities */
+ priv->has_sensitivity = 1;
+ priv->has_mwo = 0;
+ priv->has_preamble = 0;
+ priv->has_port3 = 1;
+ priv->has_ibss = 1;
+ priv->has_wep = 0;
+ priv->has_big_wep = 0;
+ priv->has_alt_txcntl = 0;
+ priv->has_ext_scan = 0;
+ priv->has_wpa = 0;
+ priv->do_fw_download = 0;
+
+ /* Determine capabilities from the firmware version */
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
+ ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+
+ firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
+
+ priv->has_ibss = (firmver >= 0x60006);
+ priv->has_wep = (firmver >= 0x40020);
+ priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
+ Gold cards from the others? */
+ priv->has_mwo = (firmver >= 0x60000);
+ priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
+ priv->ibss_port = 1;
+ priv->has_hostscan = (firmver >= 0x8000a);
+ priv->do_fw_download = 1;
+ priv->broken_monitor = (firmver >= 0x80000);
+ priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
+ priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
+ priv->has_wpa = (firmver >= 0x9002a);
+ /* Tested with Agere firmware :
+ * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
+ * Tested CableTron firmware : 4.32 => Anton */
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
+ /* Intel MAC : 00:02:B3:* */
+ /* 3Com MAC : 00:50:DA:* */
+ memset(tmp, 0, sizeof(tmp));
+ /* Get the Symbol firmware version */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SECONDARYVERSION_SYMBOL,
+ SYMBOL_MAX_VER_LEN, NULL, &tmp);
+ if (err) {
+ dev_warn(dev, "Error %d reading Symbol firmware info. "
+ "Wildly guessing capabilities...\n", err);
+ firmver = 0;
+ tmp[0] = '\0';
+ } else {
+ /* The firmware revision is a string, the format is
+ * something like : "V2.20-01".
+ * Quick and dirty parsing... - Jean II
+ */
+ firmver = ((tmp[1] - '0') << 16)
+ | ((tmp[3] - '0') << 12)
+ | ((tmp[4] - '0') << 8)
+ | ((tmp[6] - '0') << 4)
+ | (tmp[7] - '0');
+
+ tmp[SYMBOL_MAX_VER_LEN] = '\0';
+ }
+
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Symbol %s", tmp);
+
+ priv->has_ibss = (firmver >= 0x20000);
+ priv->has_wep = (firmver >= 0x15012);
+ priv->has_big_wep = (firmver >= 0x20000);
+ priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
+ (firmver >= 0x29000 && firmver < 0x30000) ||
+ firmver >= 0x31000;
+ priv->has_preamble = (firmver >= 0x20000);
+ priv->ibss_port = 4;
+
+ /* Symbol firmware is found on various cards, but
+ * there has been no attempt to check firmware
+ * download on non-spectrum_cs based cards.
+ *
+ * Given that the Agere firmware download works
+ * differently, we should avoid doing a firmware
+ * download with the Symbol algorithm on non-spectrum
+ * cards.
+ *
+ * For now we can identify a spectrum_cs based card
+ * because it has a firmware reset function.
+ */
+ priv->do_fw_download = (priv->stop_fw != NULL);
+
+ priv->broken_disableport = (firmver == 0x25013) ||
+ (firmver >= 0x30000 && firmver <= 0x31000);
+ priv->has_hostscan = (firmver >= 0x31001) ||
+ (firmver >= 0x29057 && firmver < 0x30000);
+ /* Tested with Intel firmware : 0x20015 => Jean II */
+ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ /* D-Link, Linksys, Adtron, ZoomAir, and many others...
+ * Samsung, Compaq 100/200 and Proxim are slightly
+ * different and less well tested */
+ /* D-Link MAC : 00:40:05:* */
+ /* Addtron MAC : 00:90:D1:* */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
+ sta_id.variant);
+
+ firmver = ((unsigned long)sta_id.major << 16) |
+ ((unsigned long)sta_id.minor << 8) | sta_id.variant;
+
+ priv->has_ibss = (firmver >= 0x000700); /* FIXME */
+ priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
+ priv->has_pm = (firmver >= 0x000700);
+ priv->has_hostscan = (firmver >= 0x010301);
+
+ if (firmver >= 0x000800)
+ priv->ibss_port = 0;
+ else {
+ dev_notice(dev, "Intersil firmware earlier than v0.8.x"
+ " - several features not supported\n");
+ priv->ibss_port = 1;
+ }
+ break;
+ }
+ dev_info(dev, "Firmware determined as %s\n", priv->fw_name);
+
+ return 0;
+}
+
+/* Read settings from EEPROM into our private structure.
+ * MAC address gets dropped into callers buffer
+ * Can be called before netdev registration.
+ */
+int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
+{
+ struct device *dev = priv->dev;
+ struct hermes_idstring nickbuf;
+ hermes_t *hw = &priv->hw;
+ int len;
+ int err;
+ u16 reclen;
+
+ /* Get the MAC address */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ ETH_ALEN, NULL, dev_addr);
+ if (err) {
+ dev_warn(dev, "Failed to read MAC address!\n");
+ goto out;
+ }
+
+ dev_dbg(dev, "MAC address %pM\n", dev_addr);
+
+ /* Get the station name */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ sizeof(nickbuf), &reclen, &nickbuf);
+ if (err) {
+ dev_err(dev, "failed to read station name\n");
+ goto out;
+ }
+ if (nickbuf.len)
+ len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
+ else
+ len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
+ memcpy(priv->nick, &nickbuf.val, len);
+ priv->nick[len] = '\0';
+
+ dev_dbg(dev, "Station name \"%s\"\n", priv->nick);
+
+ /* Get allowed channels */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
+ &priv->channel_mask);
+ if (err) {
+ dev_err(dev, "Failed to read channel list!\n");
+ goto out;
+ }
+
+ /* Get initial AP density */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
+ &priv->ap_density);
+ if (err || priv->ap_density < 1 || priv->ap_density > 3)
+ priv->has_sensitivity = 0;
+
+ /* Get initial RTS threshold */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ &priv->rts_thresh);
+ if (err) {
+ dev_err(dev, "Failed to read RTS threshold!\n");
+ goto out;
+ }
+
+ /* Get initial fragmentation settings */
+ if (priv->has_mwo)
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &priv->mwo_robust);
+ else
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &priv->frag_thresh);
+ if (err) {
+ dev_err(dev, "Failed to read fragmentation settings!\n");
+ goto out;
+ }
+
+ /* Power management setup */
+ if (priv->has_pm) {
+ priv->pm_on = 0;
+ priv->pm_mcast = 1;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ &priv->pm_period);
+ if (err) {
+ dev_err(dev, "Failed to read power management "
+ "period!\n");
+ goto out;
+ }
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ &priv->pm_timeout);
+ if (err) {
+ dev_err(dev, "Failed to read power management "
+ "timeout!\n");
+ goto out;
+ }
+ }
+
+ /* Preamble setup */
+ if (priv->has_preamble) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ &priv->preamble);
+ }
+
+out:
+ return err;
+}
+
+/* Can be called before netdev registration */
+int orinoco_hw_allocate_fid(struct orinoco_private *priv)
+{
+ struct device *dev = priv->dev;
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
+ /* Try workaround for old Symbol firmware bug */
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+
+ dev_warn(dev, "Firmware ALLOC bug detected "
+ "(old Symbol firmware?). Work around %s\n",
+ err ? "failed!" : "ok.");
+ }
+
+ return err;
+}
+
int orinoco_get_bitratemode(int bitrate, int automatic)
{
int ratemode = -1;
@@ -63,14 +406,245 @@
*automatic = bitrate_table[ratemode].automatic;
}
+int orinoco_hw_program_rids(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ struct wireless_dev *wdev = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct hermes_idstring idbuf;
+
+ /* Set the MAC address */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting MAC address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set up the link mode */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+ priv->port_type);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting port type\n",
+ dev->name, err);
+ return err;
+ }
+ /* Set the channel/frequency */
+ if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel %d\n",
+ dev->name, err, priv->channel);
+ return err;
+ }
+ }
+
+ if (priv->has_ibss) {
+ u16 createibss;
+
+ if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
+ printk(KERN_WARNING "%s: This firmware requires an "
+ "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+ /* With wvlan_cs, in this case, we would crash.
+ * hopefully, this driver will behave better...
+ * Jean II */
+ createibss = 0;
+ } else {
+ createibss = priv->createibss;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFCREATEIBSS,
+ createibss);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set the desired BSSID */
+ err = __orinoco_hw_set_wap(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting AP address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the desired ESSID */
+ idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+ memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+ /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the station name */
+ idbuf.len = cpu_to_le16(strlen(priv->nick));
+ memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting nickname\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set AP density */
+ if (priv->has_sensitivity) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE,
+ priv->ap_density);
+ if (err) {
+ printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
+ "Disabling sensitivity control\n",
+ dev->name, err);
+
+ priv->has_sensitivity = 0;
+ }
+ }
+
+ /* Set RTS threshold */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set fragmentation threshold or MWO robustness */
+ if (priv->has_mwo)
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ priv->mwo_robust);
+ else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set bitrate */
+ err = __orinoco_hw_set_bitrate(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting bitrate\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set power management */
+ if (priv->has_pm) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMENABLED,
+ priv->pm_on);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMULTICASTRECEIVE,
+ priv->pm_mcast);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set preamble - only for Symbol so far... */
+ if (priv->has_preamble) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ priv->preamble);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting preamble\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set up encryption */
+ if (priv->has_wep || priv->has_wpa) {
+ err = __orinoco_hw_setup_enc(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d activating encryption\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
+ /* Enable monitor mode */
+ dev->type = ARPHRD_IEEE80211;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_MONITOR, 0, NULL);
+ } else {
+ /* Disable monitor mode */
+ dev->type = ARPHRD_ETHER;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_STOP, 0, NULL);
+ }
+ if (err)
+ return err;
+
+ /* Reset promiscuity / multicast*/
+ priv->promiscuous = 0;
+ priv->mc_count = 0;
+
+ /* Record mode change */
+ wdev->iftype = priv->iw_mode;
+
+ return 0;
+}
+
/* Get tsc from the firmware */
int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
{
hermes_t *hw = &priv->hw;
int err = 0;
- u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE];
+ u8 tsc_arr[4][ORINOCO_SEQ_LEN];
- if ((key < 0) || (key > 4))
+ if ((key < 0) || (key >= 4))
return -EINVAL;
err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
@@ -194,12 +768,29 @@
{
hermes_t *hw = &priv->hw;
int err = 0;
+ int i;
switch (priv->firmware_type) {
case FIRMWARE_TYPE_AGERE:
+ {
+ struct orinoco_key keys[ORINOCO_MAX_KEYS];
+
+ memset(&keys, 0, sizeof(keys));
+ for (i = 0; i < ORINOCO_MAX_KEYS; i++) {
+ int len = min(priv->keys[i].key_len,
+ ORINOCO_MAX_KEY_SIZE);
+ memcpy(&keys[i].data, priv->keys[i].key, len);
+ if (len > SMALL_KEY_SIZE)
+ keys[i].len = cpu_to_le16(LARGE_KEY_SIZE);
+ else if (len > 0)
+ keys[i].len = cpu_to_le16(SMALL_KEY_SIZE);
+ else
+ keys[i].len = cpu_to_le16(0);
+ }
+
err = HERMES_WRITE_RECORD(hw, USER_BAP,
HERMES_RID_CNFWEPKEYS_AGERE,
- &priv->keys);
+ &keys);
if (err)
return err;
err = hermes_write_wordrec(hw, USER_BAP,
@@ -208,28 +799,38 @@
if (err)
return err;
break;
+ }
case FIRMWARE_TYPE_INTERSIL:
case FIRMWARE_TYPE_SYMBOL:
{
int keylen;
- int i;
/* Force uniform key length to work around
* firmware bugs */
- keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
+ keylen = priv->keys[priv->tx_key].key_len;
if (keylen > LARGE_KEY_SIZE) {
printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
priv->ndev->name, priv->tx_key, keylen);
return -E2BIG;
- }
+ } else if (keylen > SMALL_KEY_SIZE)
+ keylen = LARGE_KEY_SIZE;
+ else if (keylen > 0)
+ keylen = SMALL_KEY_SIZE;
+ else
+ keylen = 0;
/* Write all 4 keys */
for (i = 0; i < ORINOCO_MAX_KEYS; i++) {
+ u8 key[LARGE_KEY_SIZE] = { 0 };
+
+ memcpy(key, priv->keys[i].key,
+ priv->keys[i].key_len);
+
err = hermes_write_ltv(hw, USER_BAP,
HERMES_RID_CNFDEFAULTKEY0 + i,
HERMES_BYTES_TO_RECLEN(keylen),
- priv->keys[i].data);
+ key);
if (err)
return err;
}
@@ -255,8 +856,8 @@
int auth_flag;
int enc_flag;
- /* Setup WEP keys for WEP and WPA */
- if (priv->encode_alg)
+ /* Setup WEP keys */
+ if (priv->encode_alg == ORINOCO_ALG_WEP)
__orinoco_hw_setup_wepkeys(priv);
if (priv->wep_restrict)
@@ -266,14 +867,14 @@
if (priv->wpa_enabled)
enc_flag = 2;
- else if (priv->encode_alg == IW_ENCODE_ALG_WEP)
+ else if (priv->encode_alg == ORINOCO_ALG_WEP)
enc_flag = 1;
else
enc_flag = 0;
switch (priv->firmware_type) {
case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
- if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
+ if (priv->encode_alg == ORINOCO_ALG_WEP) {
/* Enable the shared-key authentication. */
err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFAUTHENTICATION_AGERE,
@@ -298,7 +899,7 @@
case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
- if (priv->encode_alg == IW_ENCODE_ALG_WEP) {
+ if (priv->encode_alg == ORINOCO_ALG_WEP) {
if (priv->wep_restrict ||
(priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
@@ -314,7 +915,7 @@
} else
master_wep_flag = 0;
- if (priv->iw_mode == IW_MODE_MONITOR)
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
/* Master WEP setting : on/off */
@@ -331,20 +932,22 @@
}
/* key must be 32 bytes, including the tx and rx MIC keys.
- * rsc must be 8 bytes
- * tsc must be 8 bytes or NULL
+ * rsc must be NULL or up to 8 bytes
+ * tsc must be NULL or up to 8 bytes
*/
-int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx,
- u8 *key, u8 *rsc, u8 *tsc)
+int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
+ int set_tx, u8 *key, u8 *rsc, size_t rsc_len,
+ u8 *tsc, size_t tsc_len)
{
struct {
__le16 idx;
- u8 rsc[IW_ENCODE_SEQ_MAX_SIZE];
+ u8 rsc[ORINOCO_SEQ_LEN];
u8 key[TKIP_KEYLEN];
u8 tx_mic[MIC_KEYLEN];
u8 rx_mic[MIC_KEYLEN];
- u8 tsc[IW_ENCODE_SEQ_MAX_SIZE];
+ u8 tsc[ORINOCO_SEQ_LEN];
} __attribute__ ((packed)) buf;
+ hermes_t *hw = &priv->hw;
int ret;
int err;
int k;
@@ -359,17 +962,22 @@
memcpy(buf.key, key,
sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic));
- if (rsc == NULL)
- memset(buf.rsc, 0, sizeof(buf.rsc));
- else
- memcpy(buf.rsc, rsc, sizeof(buf.rsc));
+ if (rsc_len > sizeof(buf.rsc))
+ rsc_len = sizeof(buf.rsc);
- if (tsc == NULL) {
- memset(buf.tsc, 0, sizeof(buf.tsc));
+ if (tsc_len > sizeof(buf.tsc))
+ tsc_len = sizeof(buf.tsc);
+
+ memset(buf.rsc, 0, sizeof(buf.rsc));
+ memset(buf.tsc, 0, sizeof(buf.tsc));
+
+ if (rsc != NULL)
+ memcpy(buf.rsc, rsc, rsc_len);
+
+ if (tsc != NULL)
+ memcpy(buf.tsc, tsc, tsc_len);
+ else
buf.tsc[4] = 0x10;
- } else {
- memcpy(buf.tsc, tsc, sizeof(buf.tsc));
- }
/* Wait upto 100ms for tx queue to empty */
for (k = 100; k > 0; k--) {
@@ -395,7 +1003,6 @@
hermes_t *hw = &priv->hw;
int err;
- memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx]));
err = hermes_write_wordrec(hw, USER_BAP,
HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
key_idx);
@@ -582,3 +1189,124 @@
return 0;
}
+
+int orinoco_hw_trigger_scan(struct orinoco_private *priv,
+ const struct cfg80211_ssid *ssid)
+{
+ struct net_device *dev = priv->ndev;
+ hermes_t *hw = &priv->hw;
+ unsigned long flags;
+ int err = 0;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Scanning with port 0 disabled would fail */
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ /* In monitor mode, the scan results are always empty.
+ * Probe responses are passed to the driver as received
+ * frames and could be processed in software. */
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (priv->has_hostscan) {
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN_SYMBOL,
+ HERMES_HOSTSCAN_SYMBOL_ONCE |
+ HERMES_HOSTSCAN_SYMBOL_BCAST);
+ break;
+ case FIRMWARE_TYPE_INTERSIL: {
+ __le16 req[3];
+
+ req[0] = cpu_to_le16(0x3fff); /* All channels */
+ req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
+ req[2] = 0; /* Any ESSID */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN, &req);
+ break;
+ }
+ case FIRMWARE_TYPE_AGERE:
+ if (ssid->ssid_len > 0) {
+ struct hermes_idstring idbuf;
+ size_t len = ssid->ssid_len;
+
+ idbuf.len = cpu_to_le16(len);
+ memcpy(idbuf.val, ssid->ssid, len);
+
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ HERMES_BYTES_TO_RECLEN(len + 2),
+ &idbuf);
+ } else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ 0); /* Any ESSID */
+ if (err)
+ break;
+
+ if (priv->has_ext_scan) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANCHANNELS2GHZ,
+ 0x7FFF);
+ if (err)
+ goto out;
+
+ err = hermes_inquire(hw,
+ HERMES_INQ_CHANNELINFO);
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+
+ break;
+ }
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+/* Disassociate from node with BSSID addr */
+int orinoco_hw_disassociate(struct orinoco_private *priv,
+ u8 *addr, u16 reason_code)
+{
+ hermes_t *hw = &priv->hw;
+ int err;
+
+ struct {
+ u8 addr[ETH_ALEN];
+ __le16 reason_code;
+ } __attribute__ ((packed)) buf;
+
+ /* Currently only supported by WPA enabled Agere fw */
+ if (!priv->has_wpa)
+ return -EOPNOTSUPP;
+
+ memcpy(buf.addr, addr, ETH_ALEN);
+ buf.reason_code = cpu_to_le16(reason_code);
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFDISASSOCIATE,
+ &buf);
+ return err;
+}
+
+int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
+ u8 *addr)
+{
+ hermes_t *hw = &priv->hw;
+ int err;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, addr);
+
+ return err;
+}
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index dc3f23a..8df6e87 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -7,6 +7,7 @@
#include <linux/types.h>
#include <linux/wireless.h>
+#include <net/cfg80211.h>
/* Hardware BAPs */
#define USER_BAP 0
@@ -23,17 +24,22 @@
struct orinoco_private;
struct dev_addr_list;
+int determine_fw_capabilities(struct orinoco_private *priv);
+int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr);
+int orinoco_hw_allocate_fid(struct orinoco_private *priv);
int orinoco_get_bitratemode(int bitrate, int automatic);
void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic);
+int orinoco_hw_program_rids(struct orinoco_private *priv);
int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc);
int __orinoco_hw_set_bitrate(struct orinoco_private *priv);
int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate);
int __orinoco_hw_set_wap(struct orinoco_private *priv);
int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv);
int __orinoco_hw_setup_enc(struct orinoco_private *priv);
-int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx,
- u8 *key, u8 *rsc, u8 *tsc);
+int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
+ int set_tx, u8 *key, u8 *rsc, size_t rsc_len,
+ u8 *tsc, size_t tsc_len);
int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx);
int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
struct dev_addr_list *mc_list,
@@ -43,5 +49,11 @@
int orinoco_hw_get_freq(struct orinoco_private *priv);
int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
int *numrates, s32 *rates, int max);
+int orinoco_hw_trigger_scan(struct orinoco_private *priv,
+ const struct cfg80211_ssid *ssid);
+int orinoco_hw_disassociate(struct orinoco_private *priv,
+ u8 *addr, u16 reason_code);
+int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
+ u8 *addr);
#endif /* _ORINOCO_HW_H_ */
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index a370e51..7a32bcb 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -80,6 +80,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
@@ -88,6 +89,7 @@
#include <linux/wireless.h>
#include <linux/ieee80211.h>
#include <net/iw_handler.h>
+#include <net/cfg80211.h>
#include "hermes_rid.h"
#include "hermes_dld.h"
@@ -96,6 +98,7 @@
#include "mic.h"
#include "fw.h"
#include "wext.h"
+#include "cfg.h"
#include "main.h"
#include "orinoco.h"
@@ -142,13 +145,11 @@
#define ORINOCO_MIN_MTU 256
#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
-#define SYMBOL_MAX_VER_LEN (14)
#define MAX_IRQLOOPS_PER_IRQ 10
#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
* how many events the
* device could
* legitimately generate */
-#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
#define DUMMY_FID 0xFFFF
@@ -205,11 +206,21 @@
struct list_head list;
};
+struct orinoco_scan_data {
+ void *buf;
+ size_t len;
+ int type;
+ struct list_head list;
+};
+
/********************************************************************/
/* Function prototypes */
/********************************************************************/
-static void __orinoco_set_multicast_list(struct net_device *dev);
+static int __orinoco_set_multicast_list(struct net_device *dev);
+static int __orinoco_up(struct orinoco_private *priv);
+static int __orinoco_down(struct orinoco_private *priv);
+static int __orinoco_commit(struct orinoco_private *priv);
/********************************************************************/
/* Internal helper functions */
@@ -218,11 +229,11 @@
void set_port_type(struct orinoco_private *priv)
{
switch (priv->iw_mode) {
- case IW_MODE_INFRA:
+ case NL80211_IFTYPE_STATION:
priv->port_type = 1;
priv->createibss = 0;
break;
- case IW_MODE_ADHOC:
+ case NL80211_IFTYPE_ADHOC:
if (priv->prefer_port3) {
priv->port_type = 3;
priv->createibss = 0;
@@ -231,7 +242,7 @@
priv->createibss = 1;
}
break;
- case IW_MODE_MONITOR:
+ case NL80211_IFTYPE_MONITOR:
priv->port_type = 3;
priv->createibss = 0;
break;
@@ -247,14 +258,14 @@
static int orinoco_open(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
int err;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- err = __orinoco_up(dev);
+ err = __orinoco_up(priv);
if (!err)
priv->open = 1;
@@ -266,7 +277,7 @@
static int orinoco_stop(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int err = 0;
/* We mustn't use orinoco_lock() here, because we need to be
@@ -276,7 +287,7 @@
priv->open = 0;
- err = __orinoco_down(dev);
+ err = __orinoco_down(priv);
spin_unlock_irq(&priv->lock);
@@ -285,14 +296,14 @@
static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
return &priv->stats;
}
static void orinoco_set_multicast_list(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0) {
@@ -307,7 +318,7 @@
static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU))
return -EINVAL;
@@ -326,16 +337,18 @@
/* Tx path */
/********************************************************************/
-static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
+ struct orinoco_tkip_key *key;
hermes_t *hw = &priv->hw;
int err = 0;
u16 txfid = priv->txfid;
struct ethhdr *eh;
int tx_control;
unsigned long flags;
+ int do_mic;
if (!netif_running(dev)) {
printk(KERN_ERR "%s: Tx on stopped device!\n",
@@ -355,7 +368,8 @@
return NETDEV_TX_BUSY;
}
- if (!netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
+ if (!netif_carrier_ok(dev) ||
+ (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
/* Oops, the firmware hasn't established a connection,
silently drop the packet (this seems to be the
safest approach). */
@@ -366,9 +380,14 @@
if (skb->len < ETH_HLEN)
goto drop;
+ key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
+
+ do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
+ (key != NULL));
+
tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
- if (priv->encode_alg == IW_ENCODE_ALG_TKIP)
+ if (do_mic)
tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
HERMES_TXCTRL_MIC;
@@ -450,7 +469,7 @@
}
/* Calculate Michael MIC */
- if (priv->encode_alg == IW_ENCODE_ALG_TKIP) {
+ if (do_mic) {
u8 mic_buf[MICHAEL_MIC_LEN + 1];
u8 *mic;
size_t offset;
@@ -468,8 +487,7 @@
len = MICHAEL_MIC_LEN;
}
- orinoco_mic(priv->tx_tfm_mic,
- priv->tkip_key[priv->tx_key].tx_mic,
+ orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
eh->h_dest, eh->h_source, 0 /* priority */,
skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
@@ -518,7 +536,7 @@
static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
u16 fid = hermes_read_regn(hw, ALLOCFID);
if (fid != priv->txfid) {
@@ -533,7 +551,7 @@
static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
stats->tx_packets++;
@@ -545,7 +563,7 @@
static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
u16 fid = hermes_read_regn(hw, TXCOMPLFID);
u16 status;
@@ -601,7 +619,7 @@
static void orinoco_tx_timeout(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
struct hermes *hw = &priv->hw;
@@ -650,7 +668,7 @@
struct sk_buff *skb,
struct hermes_rx_descriptor *desc)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
/* Using spy support with lots of Rx packets, like in an
* infrastructure (AP), will really slow down everything, because
@@ -687,7 +705,7 @@
int err;
int len;
struct sk_buff *skb;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
hermes_t *hw = &priv->hw;
@@ -778,7 +796,7 @@
static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
struct iw_statistics *wstats = &priv->wstats;
struct sk_buff *skb = NULL;
@@ -816,7 +834,7 @@
}
/* Handle frames in monitor mode */
- if (priv->iw_mode == IW_MODE_MONITOR) {
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
orinoco_rx_monitor(dev, rxfid, desc);
goto out;
}
@@ -902,7 +920,7 @@
struct hermes_rx_descriptor *desc,
struct sk_buff *skb)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
u16 status, fc;
int length;
@@ -914,6 +932,7 @@
/* Calculate and check MIC */
if (status & HERMES_RXSTAT_MIC) {
+ struct orinoco_tkip_key *key;
int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
HERMES_MIC_KEY_ID_SHIFT);
u8 mic[MICHAEL_MIC_LEN];
@@ -927,14 +946,18 @@
skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
length -= MICHAEL_MIC_LEN;
- orinoco_mic(priv->rx_tfm_mic,
- priv->tkip_key[key_id].rx_mic,
- desc->addr1,
- src,
+ key = (struct orinoco_tkip_key *) priv->keys[key_id].key;
+
+ if (!key) {
+ printk(KERN_WARNING "%s: Received encrypted frame from "
+ "%pM using key %i, but key is not installed\n",
+ dev->name, src, key_id);
+ goto drop;
+ }
+
+ orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src,
0, /* priority or QoS? */
- skb->data,
- skb->len,
- &mic[0]);
+ skb->data, skb->len, &mic[0]);
if (memcmp(mic, rxmic,
MICHAEL_MIC_LEN)) {
@@ -1016,8 +1039,8 @@
static void orinoco_rx_isr_tasklet(unsigned long data)
{
- struct net_device *dev = (struct net_device *) data;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = (struct orinoco_private *) data;
+ struct net_device *dev = priv->ndev;
struct orinoco_rx_data *rx_data, *temp;
struct hermes_rx_descriptor *desc;
struct sk_buff *skb;
@@ -1260,9 +1283,81 @@
orinoco_unlock(priv, &flags);
}
+static void qbuf_scan(struct orinoco_private *priv, void *buf,
+ int len, int type)
+{
+ struct orinoco_scan_data *sd;
+ unsigned long flags;
+
+ sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
+ sd->buf = buf;
+ sd->len = len;
+ sd->type = type;
+
+ spin_lock_irqsave(&priv->scan_lock, flags);
+ list_add_tail(&sd->list, &priv->scan_list);
+ spin_unlock_irqrestore(&priv->scan_lock, flags);
+
+ schedule_work(&priv->process_scan);
+}
+
+static void qabort_scan(struct orinoco_private *priv)
+{
+ struct orinoco_scan_data *sd;
+ unsigned long flags;
+
+ sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
+ sd->len = -1; /* Abort */
+
+ spin_lock_irqsave(&priv->scan_lock, flags);
+ list_add_tail(&sd->list, &priv->scan_list);
+ spin_unlock_irqrestore(&priv->scan_lock, flags);
+
+ schedule_work(&priv->process_scan);
+}
+
+static void orinoco_process_scan_results(struct work_struct *work)
+{
+ struct orinoco_private *priv =
+ container_of(work, struct orinoco_private, process_scan);
+ struct orinoco_scan_data *sd, *temp;
+ unsigned long flags;
+ void *buf;
+ int len;
+ int type;
+
+ spin_lock_irqsave(&priv->scan_lock, flags);
+ list_for_each_entry_safe(sd, temp, &priv->scan_list, list) {
+ spin_unlock_irqrestore(&priv->scan_lock, flags);
+
+ buf = sd->buf;
+ len = sd->len;
+ type = sd->type;
+
+ list_del(&sd->list);
+ kfree(sd);
+
+ if (len > 0) {
+ if (type == HERMES_INQ_CHANNELINFO)
+ orinoco_add_extscan_result(priv, buf, len);
+ else
+ orinoco_add_hostscan_results(priv, buf, len);
+
+ kfree(buf);
+ } else if (priv->scan_request) {
+ /* Either abort or complete the scan */
+ cfg80211_scan_done(priv->scan_request, (len < 0));
+ priv->scan_request = NULL;
+ }
+
+ spin_lock_irqsave(&priv->scan_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->scan_lock, flags);
+}
+
static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
u16 infofid;
struct {
__le16 len;
@@ -1327,7 +1422,7 @@
u16 newstatus;
int connected;
- if (priv->iw_mode == IW_MODE_MONITOR)
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
break;
if (len != sizeof(linkstatus)) {
@@ -1346,7 +1441,7 @@
* the hostscan frame can be requested. */
if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
- priv->has_hostscan && priv->scan_inprogress) {
+ priv->has_hostscan && priv->scan_request) {
hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
break;
}
@@ -1372,7 +1467,7 @@
}
break;
case HERMES_INQ_SCAN:
- if (!priv->scan_inprogress && priv->bssid_fixed &&
+ if (!priv->scan_request && priv->bssid_fixed &&
priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
schedule_work(&priv->join_work);
break;
@@ -1382,30 +1477,30 @@
case HERMES_INQ_HOSTSCAN_SYMBOL: {
/* Result of a scanning. Contains information about
* cells in the vicinity - Jean II */
- union iwreq_data wrqu;
unsigned char *buf;
- /* Scan is no longer in progress */
- priv->scan_inprogress = 0;
-
/* Sanity check */
if (len > 4096) {
printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
dev->name, len);
+ qabort_scan(priv);
break;
}
/* Allocate buffer for results */
buf = kmalloc(len, GFP_ATOMIC);
- if (buf == NULL)
+ if (buf == NULL) {
/* No memory, so can't printk()... */
+ qabort_scan(priv);
break;
+ }
/* Read scan data */
err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
infofid, sizeof(info));
if (err) {
kfree(buf);
+ qabort_scan(priv);
break;
}
@@ -1419,24 +1514,14 @@
}
#endif /* ORINOCO_DEBUG */
- if (orinoco_process_scan_results(priv, buf, len) == 0) {
- /* Send an empty event to user space.
- * We don't send the received data on the event because
- * it would require us to do complex transcoding, and
- * we want to minimise the work done in the irq handler
- * Use a request to extract the data - Jean II */
- wrqu.data.length = 0;
- wrqu.data.flags = 0;
- wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
- }
- kfree(buf);
+ qbuf_scan(priv, buf, len, type);
}
break;
case HERMES_INQ_CHANNELINFO:
{
struct agere_ext_scan_info *bss;
- if (!priv->scan_inprogress) {
+ if (!priv->scan_request) {
printk(KERN_DEBUG "%s: Got chaninfo without scan, "
"len=%d\n", dev->name, len);
break;
@@ -1444,25 +1529,12 @@
/* An empty result indicates that the scan is complete */
if (len == 0) {
- union iwreq_data wrqu;
-
- /* Scan is no longer in progress */
- priv->scan_inprogress = 0;
-
- wrqu.data.length = 0;
- wrqu.data.flags = 0;
- wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+ qbuf_scan(priv, NULL, len, type);
break;
}
/* Sanity check */
- else if (len > sizeof(*bss)) {
- printk(KERN_WARNING
- "%s: Ext scan results too large (%d bytes). "
- "Truncating results to %zd bytes.\n",
- dev->name, len, sizeof(*bss));
- len = sizeof(*bss);
- } else if (len < (offsetof(struct agere_ext_scan_info,
+ else if (len < (offsetof(struct agere_ext_scan_info,
data) + 2)) {
/* Drop this result now so we don't have to
* keep checking later */
@@ -1472,21 +1544,18 @@
break;
}
- bss = kmalloc(sizeof(*bss), GFP_ATOMIC);
+ bss = kmalloc(len, GFP_ATOMIC);
if (bss == NULL)
break;
/* Read scan data */
err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
infofid, sizeof(info));
- if (err) {
+ if (err)
kfree(bss);
- break;
- }
+ else
+ qbuf_scan(priv, bss, len, type);
- orinoco_add_ext_scan_result(priv, bss);
-
- kfree(bss);
break;
}
case HERMES_INQ_SEC_STAT_AGERE:
@@ -1501,6 +1570,8 @@
/* We don't actually do anything about it */
break;
}
+
+ return;
}
static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
@@ -1513,15 +1584,15 @@
/* Internal hardware control routines */
/********************************************************************/
-int __orinoco_up(struct net_device *dev)
+static int __orinoco_up(struct orinoco_private *priv)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device *dev = priv->ndev;
struct hermes *hw = &priv->hw;
int err;
netif_carrier_off(dev); /* just to make sure */
- err = __orinoco_program_rids(dev);
+ err = __orinoco_commit(priv);
if (err) {
printk(KERN_ERR "%s: Error %d configuring card\n",
dev->name, err);
@@ -1541,11 +1612,10 @@
return 0;
}
-EXPORT_SYMBOL(__orinoco_up);
-int __orinoco_down(struct net_device *dev)
+static int __orinoco_down(struct orinoco_private *priv)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device *dev = priv->ndev;
struct hermes *hw = &priv->hw;
int err;
@@ -1573,31 +1643,9 @@
return 0;
}
-EXPORT_SYMBOL(__orinoco_down);
-static int orinoco_allocate_fid(struct net_device *dev)
+static int orinoco_reinit_firmware(struct orinoco_private *priv)
{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
- /* Try workaround for old Symbol firmware bug */
- priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
-
- printk(KERN_WARNING "%s: firmware ALLOC bug detected "
- "(old Symbol firmware?). Work around %s\n",
- dev->name, err ? "failed!" : "ok.");
- }
-
- return err;
-}
-
-int orinoco_reinit_firmware(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
struct hermes *hw = &priv->hw;
int err;
@@ -1608,246 +1656,15 @@
priv->do_fw_download = 0;
}
if (!err)
- err = orinoco_allocate_fid(dev);
+ err = orinoco_hw_allocate_fid(priv);
return err;
}
-EXPORT_SYMBOL(orinoco_reinit_firmware);
-int __orinoco_program_rids(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- struct hermes_idstring idbuf;
-
- /* Set the MAC address */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting MAC address\n",
- dev->name, err);
- return err;
- }
-
- /* Set up the link mode */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
- priv->port_type);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting port type\n",
- dev->name, err);
- return err;
- }
- /* Set the channel/frequency */
- if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFOWNCHANNEL,
- priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel %d\n",
- dev->name, err, priv->channel);
- return err;
- }
- }
-
- if (priv->has_ibss) {
- u16 createibss;
-
- if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
- printk(KERN_WARNING "%s: This firmware requires an "
- "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
- /* With wvlan_cs, in this case, we would crash.
- * hopefully, this driver will behave better...
- * Jean II */
- createibss = 0;
- } else {
- createibss = priv->createibss;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFCREATEIBSS,
- createibss);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set the desired BSSID */
- err = __orinoco_hw_set_wap(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting AP address\n",
- dev->name, err);
- return err;
- }
- /* Set the desired ESSID */
- idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
- memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
- /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
- dev->name, err);
- return err;
- }
-
- /* Set the station name */
- idbuf.len = cpu_to_le16(strlen(priv->nick));
- memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting nickname\n",
- dev->name, err);
- return err;
- }
-
- /* Set AP density */
- if (priv->has_sensitivity) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSYSTEMSCALE,
- priv->ap_density);
- if (err) {
- printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
- "Disabling sensitivity control\n",
- dev->name, err);
-
- priv->has_sensitivity = 0;
- }
- }
-
- /* Set RTS threshold */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
- dev->name, err);
- return err;
- }
-
- /* Set fragmentation threshold or MWO robustness */
- if (priv->has_mwo)
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- priv->mwo_robust);
- else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting fragmentation\n",
- dev->name, err);
- return err;
- }
-
- /* Set bitrate */
- err = __orinoco_hw_set_bitrate(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting bitrate\n",
- dev->name, err);
- return err;
- }
-
- /* Set power management */
- if (priv->has_pm) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMENABLED,
- priv->pm_on);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMULTICASTRECEIVE,
- priv->pm_mcast);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set preamble - only for Symbol so far... */
- if (priv->has_preamble) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- priv->preamble);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting preamble\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set up encryption */
- if (priv->has_wep || priv->has_wpa) {
- err = __orinoco_hw_setup_enc(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d activating encryption\n",
- dev->name, err);
- return err;
- }
- }
-
- if (priv->iw_mode == IW_MODE_MONITOR) {
- /* Enable monitor mode */
- dev->type = ARPHRD_IEEE80211;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_MONITOR, 0, NULL);
- } else {
- /* Disable monitor mode */
- dev->type = ARPHRD_ETHER;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_STOP, 0, NULL);
- }
- if (err)
- return err;
-
- /* Set promiscuity / multicast*/
- priv->promiscuous = 0;
- priv->mc_count = 0;
-
- /* FIXME: what about netif_tx_lock */
- __orinoco_set_multicast_list(dev);
-
- return 0;
-}
-
-/* FIXME: return int? */
-static void
+static int
__orinoco_set_multicast_list(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int err = 0;
int promisc, mc_count;
@@ -1864,6 +1681,8 @@
err = __orinoco_hw_set_multicast_list(priv, dev->mc_list, mc_count,
promisc);
+
+ return err;
}
/* This must be called from user context, without locks held - use
@@ -1896,9 +1715,11 @@
orinoco_unlock(priv, &flags);
- /* Scanning support: Cleanup of driver struct */
- orinoco_clear_scan_results(priv, 0);
- priv->scan_inprogress = 0;
+ /* Scanning support: Notify scan cancellation */
+ if (priv->scan_request) {
+ cfg80211_scan_done(priv->scan_request, 1);
+ priv->scan_request = NULL;
+ }
if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
@@ -1909,7 +1730,7 @@
}
}
- err = orinoco_reinit_firmware(dev);
+ err = orinoco_reinit_firmware(priv);
if (err) {
printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
dev->name, err);
@@ -1924,7 +1745,7 @@
/* priv->open or priv->hw_unavailable might have changed while
* we dropped the lock */
if (priv->open && (!priv->hw_unavailable)) {
- err = __orinoco_up(dev);
+ err = __orinoco_up(priv);
if (err) {
printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
dev->name, err);
@@ -1941,6 +1762,64 @@
printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
}
+static int __orinoco_commit(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ int err = 0;
+
+ err = orinoco_hw_program_rids(priv);
+
+ /* FIXME: what about netif_tx_lock */
+ (void) __orinoco_set_multicast_list(dev);
+
+ return err;
+}
+
+/* Ensures configuration changes are applied. May result in a reset.
+ * The caller should hold priv->lock
+ */
+int orinoco_commit(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ hermes_t *hw = &priv->hw;
+ int err;
+
+ if (priv->broken_disableport) {
+ schedule_work(&priv->reset_work);
+ return 0;
+ }
+
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port "
+ "while reconfiguring card\n", dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
+
+ err = __orinoco_commit(priv);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
+
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
+
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
+ return err;
+}
+
/********************************************************************/
/* Interrupt handler */
/********************************************************************/
@@ -1960,8 +1839,8 @@
irqreturn_t orinoco_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = dev_id;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = dev_id;
+ struct net_device *dev = priv->ndev;
hermes_t *hw = &priv->hw;
int count = MAX_IRQLOOPS_PER_IRQ;
u16 evstat, events;
@@ -2096,227 +1975,12 @@
/* Initialization */
/********************************************************************/
-struct comp_id {
- u16 id, variant, major, minor;
-} __attribute__ ((packed));
-
-static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
+int orinoco_init(struct orinoco_private *priv)
{
- if (nic_id->id < 0x8000)
- return FIRMWARE_TYPE_AGERE;
- else if (nic_id->id == 0x8000 && nic_id->major == 0)
- return FIRMWARE_TYPE_SYMBOL;
- else
- return FIRMWARE_TYPE_INTERSIL;
-}
-
-/* Set priv->firmware type, determine firmware properties */
-static int determine_firmware(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- struct comp_id nic_id, sta_id;
- unsigned int firmver;
- char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
-
- /* Get the hardware version */
- err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
- if (err) {
- printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
- dev->name, err);
- return err;
- }
-
- le16_to_cpus(&nic_id.id);
- le16_to_cpus(&nic_id.variant);
- le16_to_cpus(&nic_id.major);
- le16_to_cpus(&nic_id.minor);
- printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
- dev->name, nic_id.id, nic_id.variant,
- nic_id.major, nic_id.minor);
-
- priv->firmware_type = determine_firmware_type(&nic_id);
-
- /* Get the firmware version */
- err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
- if (err) {
- printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
- dev->name, err);
- return err;
- }
-
- le16_to_cpus(&sta_id.id);
- le16_to_cpus(&sta_id.variant);
- le16_to_cpus(&sta_id.major);
- le16_to_cpus(&sta_id.minor);
- printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
- dev->name, sta_id.id, sta_id.variant,
- sta_id.major, sta_id.minor);
-
- switch (sta_id.id) {
- case 0x15:
- printk(KERN_ERR "%s: Primary firmware is active\n",
- dev->name);
- return -ENODEV;
- case 0x14b:
- printk(KERN_ERR "%s: Tertiary firmware is active\n",
- dev->name);
- return -ENODEV;
- case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
- case 0x21: /* Symbol Spectrum24 Trilogy */
- break;
- default:
- printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
- dev->name);
- break;
- }
-
- /* Default capabilities */
- priv->has_sensitivity = 1;
- priv->has_mwo = 0;
- priv->has_preamble = 0;
- priv->has_port3 = 1;
- priv->has_ibss = 1;
- priv->has_wep = 0;
- priv->has_big_wep = 0;
- priv->has_alt_txcntl = 0;
- priv->has_ext_scan = 0;
- priv->has_wpa = 0;
- priv->do_fw_download = 0;
-
- /* Determine capabilities from the firmware version */
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
- ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
- snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
- "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
-
- firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
-
- priv->has_ibss = (firmver >= 0x60006);
- priv->has_wep = (firmver >= 0x40020);
- priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
- Gold cards from the others? */
- priv->has_mwo = (firmver >= 0x60000);
- priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
- priv->ibss_port = 1;
- priv->has_hostscan = (firmver >= 0x8000a);
- priv->do_fw_download = 1;
- priv->broken_monitor = (firmver >= 0x80000);
- priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
- priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
- priv->has_wpa = (firmver >= 0x9002a);
- /* Tested with Agere firmware :
- * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
- * Tested CableTron firmware : 4.32 => Anton */
- break;
- case FIRMWARE_TYPE_SYMBOL:
- /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
- /* Intel MAC : 00:02:B3:* */
- /* 3Com MAC : 00:50:DA:* */
- memset(tmp, 0, sizeof(tmp));
- /* Get the Symbol firmware version */
- err = hermes_read_ltv(hw, USER_BAP,
- HERMES_RID_SECONDARYVERSION_SYMBOL,
- SYMBOL_MAX_VER_LEN, NULL, &tmp);
- if (err) {
- printk(KERN_WARNING
- "%s: Error %d reading Symbol firmware info. "
- "Wildly guessing capabilities...\n",
- dev->name, err);
- firmver = 0;
- tmp[0] = '\0';
- } else {
- /* The firmware revision is a string, the format is
- * something like : "V2.20-01".
- * Quick and dirty parsing... - Jean II
- */
- firmver = ((tmp[1] - '0') << 16)
- | ((tmp[3] - '0') << 12)
- | ((tmp[4] - '0') << 8)
- | ((tmp[6] - '0') << 4)
- | (tmp[7] - '0');
-
- tmp[SYMBOL_MAX_VER_LEN] = '\0';
- }
-
- snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
- "Symbol %s", tmp);
-
- priv->has_ibss = (firmver >= 0x20000);
- priv->has_wep = (firmver >= 0x15012);
- priv->has_big_wep = (firmver >= 0x20000);
- priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
- (firmver >= 0x29000 && firmver < 0x30000) ||
- firmver >= 0x31000;
- priv->has_preamble = (firmver >= 0x20000);
- priv->ibss_port = 4;
-
- /* Symbol firmware is found on various cards, but
- * there has been no attempt to check firmware
- * download on non-spectrum_cs based cards.
- *
- * Given that the Agere firmware download works
- * differently, we should avoid doing a firmware
- * download with the Symbol algorithm on non-spectrum
- * cards.
- *
- * For now we can identify a spectrum_cs based card
- * because it has a firmware reset function.
- */
- priv->do_fw_download = (priv->stop_fw != NULL);
-
- priv->broken_disableport = (firmver == 0x25013) ||
- (firmver >= 0x30000 && firmver <= 0x31000);
- priv->has_hostscan = (firmver >= 0x31001) ||
- (firmver >= 0x29057 && firmver < 0x30000);
- /* Tested with Intel firmware : 0x20015 => Jean II */
- /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
- break;
- case FIRMWARE_TYPE_INTERSIL:
- /* D-Link, Linksys, Adtron, ZoomAir, and many others...
- * Samsung, Compaq 100/200 and Proxim are slightly
- * different and less well tested */
- /* D-Link MAC : 00:40:05:* */
- /* Addtron MAC : 00:90:D1:* */
- snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
- "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
- sta_id.variant);
-
- firmver = ((unsigned long)sta_id.major << 16) |
- ((unsigned long)sta_id.minor << 8) | sta_id.variant;
-
- priv->has_ibss = (firmver >= 0x000700); /* FIXME */
- priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
- priv->has_pm = (firmver >= 0x000700);
- priv->has_hostscan = (firmver >= 0x010301);
-
- if (firmver >= 0x000800)
- priv->ibss_port = 0;
- else {
- printk(KERN_NOTICE "%s: Intersil firmware earlier "
- "than v0.8.x - several features not supported\n",
- dev->name);
- priv->ibss_port = 1;
- }
- break;
- }
- printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
- priv->fw_name);
-
- return 0;
-}
-
-static int orinoco_init(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct device *dev = priv->dev;
+ struct wiphy *wiphy = priv_to_wiphy(priv);
hermes_t *hw = &priv->hw;
int err = 0;
- struct hermes_idstring nickbuf;
- u16 reclen;
- int len;
/* No need to lock, the hw_unavailable flag is already set in
* alloc_orinocodev() */
@@ -2325,15 +1989,14 @@
/* Initialize the firmware */
err = hermes_init(hw);
if (err != 0) {
- printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
- dev->name, err);
+ dev_err(dev, "Failed to initialize firmware (err = %d)\n",
+ err);
goto out;
}
- err = determine_firmware(dev);
+ err = determine_fw_capabilities(priv);
if (err != 0) {
- printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
- dev->name);
+ dev_err(dev, "Incompatible firmware, aborting\n");
goto out;
}
@@ -2347,154 +2010,48 @@
priv->do_fw_download = 0;
/* Check firmware version again */
- err = determine_firmware(dev);
+ err = determine_fw_capabilities(priv);
if (err != 0) {
- printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
- dev->name);
+ dev_err(dev, "Incompatible firmware, aborting\n");
goto out;
}
}
if (priv->has_port3)
- printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n",
- dev->name);
+ dev_info(dev, "Ad-hoc demo mode supported\n");
if (priv->has_ibss)
- printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
- dev->name);
- if (priv->has_wep) {
- printk(KERN_DEBUG "%s: WEP supported, %s-bit key\n", dev->name,
- priv->has_big_wep ? "104" : "40");
- }
+ dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n");
+ if (priv->has_wep)
+ dev_info(dev, "WEP supported, %s-bit key\n",
+ priv->has_big_wep ? "104" : "40");
if (priv->has_wpa) {
- printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name);
+ dev_info(dev, "WPA-PSK supported\n");
if (orinoco_mic_init(priv)) {
- printk(KERN_ERR "%s: Failed to setup MIC crypto "
- "algorithm. Disabling WPA support\n", dev->name);
+ dev_err(dev, "Failed to setup MIC crypto algorithm. "
+ "Disabling WPA support\n");
priv->has_wpa = 0;
}
}
- /* Now we have the firmware capabilities, allocate appropiate
- * sized scan buffers */
- if (orinoco_bss_data_allocate(priv))
+ err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr);
+ if (err)
goto out;
- orinoco_bss_data_init(priv);
- /* Get the MAC address */
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- ETH_ALEN, NULL, dev->dev_addr);
+ err = orinoco_hw_allocate_fid(priv);
if (err) {
- printk(KERN_WARNING "%s: failed to read MAC address!\n",
- dev->name);
+ dev_err(dev, "Failed to allocate NIC buffer!\n");
goto out;
}
- printk(KERN_DEBUG "%s: MAC address %pM\n",
- dev->name, dev->dev_addr);
-
- /* Get the station name */
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- sizeof(nickbuf), &reclen, &nickbuf);
- if (err) {
- printk(KERN_ERR "%s: failed to read station name\n",
- dev->name);
- goto out;
- }
- if (nickbuf.len)
- len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
- else
- len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
- memcpy(priv->nick, &nickbuf.val, len);
- priv->nick[len] = '\0';
-
- printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
-
- err = orinoco_allocate_fid(dev);
- if (err) {
- printk(KERN_ERR "%s: failed to allocate NIC buffer!\n",
- dev->name);
- goto out;
- }
-
- /* Get allowed channels */
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
- &priv->channel_mask);
- if (err) {
- printk(KERN_ERR "%s: failed to read channel list!\n",
- dev->name);
- goto out;
- }
-
- /* Get initial AP density */
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
- &priv->ap_density);
- if (err || priv->ap_density < 1 || priv->ap_density > 3)
- priv->has_sensitivity = 0;
-
- /* Get initial RTS threshold */
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- &priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: failed to read RTS threshold!\n",
- dev->name);
- goto out;
- }
-
- /* Get initial fragmentation settings */
- if (priv->has_mwo)
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- &priv->mwo_robust);
- else
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- &priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
- dev->name);
- goto out;
- }
-
- /* Power management setup */
- if (priv->has_pm) {
- priv->pm_on = 0;
- priv->pm_mcast = 1;
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- &priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: failed to read power management period!\n",
- dev->name);
- goto out;
- }
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- &priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: failed to read power management timeout!\n",
- dev->name);
- goto out;
- }
- }
-
- /* Preamble setup */
- if (priv->has_preamble) {
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- &priv->preamble);
- if (err)
- goto out;
- }
-
/* Set up the default configuration */
- priv->iw_mode = IW_MODE_INFRA;
+ priv->iw_mode = NL80211_IFTYPE_STATION;
/* By default use IEEE/IBSS ad-hoc mode if we have it */
priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss);
set_port_type(priv);
priv->channel = 0; /* use firmware default */
priv->promiscuous = 0;
- priv->encode_alg = IW_ENCODE_ALG_NONE;
+ priv->encode_alg = ORINOCO_ALG_NONE;
priv->tx_key = 0;
priv->wpa_enabled = 0;
priv->tkip_cm_active = 0;
@@ -2502,20 +2059,25 @@
priv->wpa_ie_len = 0;
priv->wpa_ie = NULL;
+ if (orinoco_wiphy_register(wiphy)) {
+ err = -ENODEV;
+ goto out;
+ }
+
/* Make the hardware available, as long as it hasn't been
* removed elsewhere (e.g. by PCMCIA hot unplug) */
spin_lock_irq(&priv->lock);
priv->hw_unavailable--;
spin_unlock_irq(&priv->lock);
- printk(KERN_DEBUG "%s: ready\n", dev->name);
+ dev_dbg(dev, "Ready\n");
out:
return err;
}
+EXPORT_SYMBOL(orinoco_init);
static const struct net_device_ops orinoco_netdev_ops = {
- .ndo_init = orinoco_init,
.ndo_open = orinoco_open,
.ndo_stop = orinoco_stop,
.ndo_start_xmit = orinoco_xmit,
@@ -2527,40 +2089,64 @@
.ndo_get_stats = orinoco_get_stats,
};
-struct net_device
+/* Allocate private data.
+ *
+ * This driver has a number of structures associated with it
+ * netdev - Net device structure for each network interface
+ * wiphy - structure associated with wireless phy
+ * wireless_dev (wdev) - structure for each wireless interface
+ * hw - structure for hermes chip info
+ * card - card specific structure for use by the card driver
+ * (airport, orinoco_cs)
+ * priv - orinoco private data
+ * device - generic linux device structure
+ *
+ * +---------+ +---------+
+ * | wiphy | | netdev |
+ * | +-------+ | +-------+
+ * | | priv | | | wdev |
+ * | | +-----+ +-+-------+
+ * | | | hw |
+ * | +-+-----+
+ * | | card |
+ * +-+-------+
+ *
+ * priv has a link to netdev and device
+ * wdev has a link to wiphy
+ */
+struct orinoco_private
*alloc_orinocodev(int sizeof_card,
struct device *device,
int (*hard_reset)(struct orinoco_private *),
int (*stop_fw)(struct orinoco_private *, int))
{
- struct net_device *dev;
struct orinoco_private *priv;
+ struct wiphy *wiphy;
- dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
- if (!dev)
+ /* allocate wiphy
+ * NOTE: We only support a single virtual interface
+ * but this may change when monitor mode is added
+ */
+ wiphy = wiphy_new(&orinoco_cfg_ops,
+ sizeof(struct orinoco_private) + sizeof_card);
+ if (!wiphy)
return NULL;
- priv = netdev_priv(dev);
- priv->ndev = dev;
+
+ priv = wiphy_priv(wiphy);
+ priv->dev = device;
+
if (sizeof_card)
priv->card = (void *)((unsigned long)priv
+ sizeof(struct orinoco_private));
else
priv->card = NULL;
- priv->dev = device;
- /* Setup / override net_device fields */
- dev->netdev_ops = &orinoco_netdev_ops;
- dev->watchdog_timeo = HZ; /* 1 second timeout */
- dev->ethtool_ops = &orinoco_ethtool_ops;
- dev->wireless_handlers = &orinoco_handler_def;
+ orinoco_wiphy_init(wiphy);
+
#ifdef WIRELESS_SPY
priv->wireless_data.spy_data = &priv->spy_data;
- dev->wireless_data = &priv->wireless_data;
#endif
- /* Reserve space in skb for the SNAP header */
- dev->hard_header_len += ENCAPS_OVERHEAD;
-
/* Set up default callbacks */
priv->hard_reset = hard_reset;
priv->stop_fw = stop_fw;
@@ -2576,9 +2162,12 @@
INIT_LIST_HEAD(&priv->rx_list);
tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet,
- (unsigned long) dev);
+ (unsigned long) priv);
- netif_carrier_off(dev);
+ spin_lock_init(&priv->scan_lock);
+ INIT_LIST_HEAD(&priv->scan_list);
+ INIT_WORK(&priv->process_scan, orinoco_process_scan_results);
+
priv->last_linkstatus = 0xffff;
#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
@@ -2589,14 +2178,91 @@
/* Register PM notifiers */
orinoco_register_pm_notifier(priv);
- return dev;
+ return priv;
}
EXPORT_SYMBOL(alloc_orinocodev);
-void free_orinocodev(struct net_device *dev)
+/* We can only support a single interface. We provide a separate
+ * function to set it up to distinguish between hardware
+ * initialisation and interface setup.
+ *
+ * The base_addr and irq parameters are passed on to netdev for use
+ * with SIOCGIFMAP.
+ */
+int orinoco_if_add(struct orinoco_private *priv,
+ unsigned long base_addr,
+ unsigned int irq)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct wiphy *wiphy = priv_to_wiphy(priv);
+ struct wireless_dev *wdev;
+ struct net_device *dev;
+ int ret;
+
+ dev = alloc_etherdev(sizeof(struct wireless_dev));
+
+ if (!dev)
+ return -ENOMEM;
+
+ /* Initialise wireless_dev */
+ wdev = netdev_priv(dev);
+ wdev->wiphy = wiphy;
+ wdev->iftype = NL80211_IFTYPE_STATION;
+
+ /* Setup / override net_device fields */
+ dev->ieee80211_ptr = wdev;
+ dev->netdev_ops = &orinoco_netdev_ops;
+ dev->watchdog_timeo = HZ; /* 1 second timeout */
+ dev->ethtool_ops = &orinoco_ethtool_ops;
+ dev->wireless_handlers = &orinoco_handler_def;
+#ifdef WIRELESS_SPY
+ dev->wireless_data = &priv->wireless_data;
+#endif
+ /* we use the default eth_mac_addr for setting the MAC addr */
+
+ /* Reserve space in skb for the SNAP header */
+ dev->hard_header_len += ENCAPS_OVERHEAD;
+
+ netif_carrier_off(dev);
+
+ memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
+
+ dev->base_addr = base_addr;
+ dev->irq = irq;
+
+ SET_NETDEV_DEV(dev, priv->dev);
+ ret = register_netdev(dev);
+ if (ret)
+ goto fail;
+
+ priv->ndev = dev;
+
+ /* Report what we've done */
+ dev_dbg(priv->dev, "Registerred interface %s.\n", dev->name);
+
+ return 0;
+
+ fail:
+ free_netdev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(orinoco_if_add);
+
+void orinoco_if_del(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+
+ unregister_netdev(dev);
+ free_netdev(dev);
+}
+EXPORT_SYMBOL(orinoco_if_del);
+
+void free_orinocodev(struct orinoco_private *priv)
+{
+ struct wiphy *wiphy = priv_to_wiphy(priv);
struct orinoco_rx_data *rx_data, *temp;
+ struct orinoco_scan_data *sd, *sdtemp;
+
+ wiphy_unregister(wiphy);
/* If the tasklet is scheduled when we call tasklet_kill it
* will run one final time. However the tasklet will only
@@ -2612,21 +2278,80 @@
kfree(rx_data);
}
+ cancel_work_sync(&priv->process_scan);
+ /* Explicitly drain priv->scan_list */
+ list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) {
+ list_del(&sd->list);
+
+ if ((sd->len > 0) && sd->buf)
+ kfree(sd->buf);
+ kfree(sd);
+ }
+
orinoco_unregister_pm_notifier(priv);
orinoco_uncache_fw(priv);
priv->wpa_ie_len = 0;
kfree(priv->wpa_ie);
orinoco_mic_free(priv);
- orinoco_bss_data_free(priv);
- free_netdev(dev);
+ wiphy_free(wiphy);
}
EXPORT_SYMBOL(free_orinocodev);
+int orinoco_up(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ err = orinoco_reinit_firmware(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+ dev->name, err);
+ goto exit;
+ }
+
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
+
+ if (priv->open && !priv->hw_unavailable) {
+ err = __orinoco_up(priv);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card\n",
+ dev->name, err);
+ }
+
+exit:
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(orinoco_up);
+
+void orinoco_down(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ err = __orinoco_down(priv);
+ if (err)
+ printk(KERN_WARNING "%s: Error %d downing interface\n",
+ dev->name, err);
+
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(orinoco_down);
+
static void orinoco_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
diff --git a/drivers/net/wireless/orinoco/main.h b/drivers/net/wireless/orinoco/main.h
index af2bae4..21ab36c 100644
--- a/drivers/net/wireless/orinoco/main.h
+++ b/drivers/net/wireless/orinoco/main.h
@@ -29,10 +29,9 @@
struct work_struct;
void set_port_type(struct orinoco_private *priv);
-int __orinoco_program_rids(struct net_device *dev);
+int orinoco_commit(struct orinoco_private *priv);
void orinoco_reset(struct work_struct *work);
-
/* Information element helpers - find a home for these... */
static inline u8 *orinoco_get_ie(u8 *data, size_t len,
enum ieee80211_eid eid)
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 8e5a72c..9ac6f1d 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -14,6 +14,7 @@
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
+#include <net/cfg80211.h>
#include "hermes.h"
@@ -24,6 +25,7 @@
#define MAX_SCAN_LEN 4096
+#define ORINOCO_SEQ_LEN 8
#define ORINOCO_MAX_KEY_SIZE 14
#define ORINOCO_MAX_KEYS 4
@@ -41,24 +43,18 @@
u8 rx_mic[MIC_KEYLEN];
};
+enum orinoco_alg {
+ ORINOCO_ALG_NONE,
+ ORINOCO_ALG_WEP,
+ ORINOCO_ALG_TKIP
+};
+
typedef enum {
FIRMWARE_TYPE_AGERE,
FIRMWARE_TYPE_INTERSIL,
FIRMWARE_TYPE_SYMBOL
} fwtype_t;
-struct bss_element {
- union hermes_scan_info bss;
- unsigned long last_scanned;
- struct list_head list;
-};
-
-struct xbss_element {
- struct agere_ext_scan_info bss;
- unsigned long last_scanned;
- struct list_head list;
-};
-
struct firmware;
struct orinoco_private {
@@ -67,6 +63,10 @@
int (*hard_reset)(struct orinoco_private *);
int (*stop_fw)(struct orinoco_private *, int);
+ struct ieee80211_supported_band band;
+ struct ieee80211_channel channels[14];
+ u32 cipher_suites[3];
+
/* Synchronisation stuff */
spinlock_t lock;
int hw_unavailable;
@@ -114,12 +114,14 @@
unsigned int do_fw_download:1;
unsigned int broken_disableport:1;
unsigned int broken_monitor:1;
+ unsigned int prefer_port3:1;
/* Configuration paramaters */
- u32 iw_mode;
- int prefer_port3;
- u16 encode_alg, wep_restrict, tx_key;
- struct orinoco_key keys[ORINOCO_MAX_KEYS];
+ enum nl80211_iftype iw_mode;
+ enum orinoco_alg encode_alg;
+ u16 wep_restrict, tx_key;
+ struct key_params keys[ORINOCO_MAX_KEYS];
+
int bitratemode;
char nick[IW_ESSID_MAX_SIZE+1];
char desired_essid[IW_ESSID_MAX_SIZE+1];
@@ -140,18 +142,15 @@
int promiscuous, mc_count;
/* Scanning support */
- struct list_head bss_list;
- struct list_head bss_free_list;
- void *bss_xbss_data;
-
- int scan_inprogress; /* Scan pending... */
- u32 scan_mode; /* Type of scan done */
+ struct cfg80211_scan_request *scan_request;
+ struct work_struct process_scan;
+ struct list_head scan_list;
+ spinlock_t scan_lock; /* protects the scan list */
/* WPA support */
u8 *wpa_ie;
int wpa_ie_len;
- struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS];
struct crypto_hash *rx_tfm_mic;
struct crypto_hash *tx_tfm_mic;
@@ -182,14 +181,18 @@
/* Exported prototypes */
/********************************************************************/
-extern struct net_device *alloc_orinocodev(
+extern struct orinoco_private *alloc_orinocodev(
int sizeof_card, struct device *device,
int (*hard_reset)(struct orinoco_private *),
int (*stop_fw)(struct orinoco_private *, int));
-extern void free_orinocodev(struct net_device *dev);
-extern int __orinoco_up(struct net_device *dev);
-extern int __orinoco_down(struct net_device *dev);
-extern int orinoco_reinit_firmware(struct net_device *dev);
+extern void free_orinocodev(struct orinoco_private *priv);
+extern int orinoco_init(struct orinoco_private *priv);
+extern int orinoco_if_add(struct orinoco_private *priv,
+ unsigned long base_addr,
+ unsigned int irq);
+extern void orinoco_if_del(struct orinoco_private *priv);
+extern int orinoco_up(struct orinoco_private *priv);
+extern void orinoco_down(struct orinoco_private *priv);
extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
/********************************************************************/
@@ -215,4 +218,10 @@
spin_unlock_irqrestore(&priv->lock, *flags);
}
+/*** Navigate from net_device to orinoco_private ***/
+static inline struct orinoco_private *ndev_priv(struct net_device *dev)
+{
+ struct wireless_dev *wdev = netdev_priv(dev);
+ return wdev_priv(wdev);
+}
#endif /* _ORINOCO_H */
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index b381aed..38c1c9d 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -106,26 +106,24 @@
static int
orinoco_cs_probe(struct pcmcia_device *link)
{
- struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
- dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
- orinoco_cs_hard_reset, NULL);
- if (!dev)
+ priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ orinoco_cs_hard_reset, NULL);
+ if (!priv)
return -ENOMEM;
- priv = netdev_priv(dev);
card = priv->card;
/* Link both structures together */
card->p_dev = link;
- link->priv = dev;
+ link->priv = priv;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = orinoco_interrupt;
- link->irq.Instance = dev;
+ link->irq.Instance = priv;
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
@@ -146,14 +144,14 @@
*/
static void orinoco_cs_detach(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
+ struct orinoco_private *priv = link->priv;
if (link->dev_node)
- unregister_netdev(dev);
+ orinoco_if_del(priv);
orinoco_cs_release(link);
- free_orinocodev(dev);
+ free_orinocodev(priv);
} /* orinoco_cs_detach */
/*
@@ -239,8 +237,7 @@
static int
orinoco_cs_config(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
@@ -295,29 +292,27 @@
pcmcia_request_configuration(link, &link->conf));
/* Ok, we have the configuration, prepare to register the netdev */
- dev->base_addr = link->io.BasePort1;
- dev->irq = link->irq.AssignedIRQ;
card->node.major = card->node.minor = 0;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
- /* Tell the stack we exist */
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR PFX "register_netdev() failed\n");
+ /* Initialise the main driver */
+ if (orinoco_init(priv) != 0) {
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
+ goto failed;
+ }
+
+ /* Register an interface with the stack */
+ if (orinoco_if_add(priv, link->io.BasePort1,
+ link->irq.AssignedIRQ) != 0) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
/* At this point, the dev_node_t structure(s) needs to be
* initialized and arranged in a linked list at link->dev_node. */
- strcpy(card->node.dev_name, dev->name);
+ strcpy(card->node.dev_name, priv->ndev->name);
link->dev_node = &card->node; /* link->dev_node being non-NULL is also
* used to indicate that the
* net_device has been registered */
-
- /* Finally, report what we've done */
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
- "0x%04x-0x%04x\n", dev->name, dev_name(dev->dev.parent),
- link->irq.AssignedIRQ, link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
return 0;
cs_failed:
@@ -336,8 +331,7 @@
static void
orinoco_cs_release(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = link->priv;
unsigned long flags;
/* We're committed to taking the device away now, so mark the
@@ -353,62 +347,26 @@
static int orinoco_cs_suspend(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
- int err = 0;
- unsigned long flags;
/* This is probably racy, but I can't think of
a better way, short of rewriting the PCMCIA
layer to not suck :-( */
- if (!test_bit(0, &card->hard_reset_in_progress)) {
- spin_lock_irqsave(&priv->lock, flags);
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
-
- spin_unlock_irqrestore(&priv->lock, flags);
- }
+ if (!test_bit(0, &card->hard_reset_in_progress))
+ orinoco_down(priv);
return 0;
}
static int orinoco_cs_resume(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
int err = 0;
- unsigned long flags;
- if (!test_bit(0, &card->hard_reset_in_progress)) {
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
- dev->name, err);
- return -EIO;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
-
- if (priv->open && !priv->hw_unavailable) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
- }
+ if (!test_bit(0, &card->hard_reset_in_progress))
+ err = orinoco_up(priv);
return err;
}
diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c
index b017262..c13a4c3 100644
--- a/drivers/net/wireless/orinoco/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco/orinoco_nortel.c
@@ -144,7 +144,6 @@
int err;
struct orinoco_private *priv;
struct orinoco_pci_card *card;
- struct net_device *dev;
void __iomem *hermes_io, *bridge_io, *attr_io;
err = pci_enable_device(pdev);
@@ -181,24 +180,22 @@
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_nortel_cor_reset, NULL);
- if (!dev) {
+ priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_nortel_cor_reset, NULL);
+ if (!priv) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
goto fail_alloc;
}
- priv = netdev_priv(dev);
card = priv->card;
card->bridge_io = bridge_io;
card->attr_io = attr_io;
- SET_NETDEV_DEV(dev, &pdev->dev);
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
+ DRIVER_NAME, priv);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
err = -EBUSY;
@@ -217,24 +214,28 @@
goto fail;
}
- err = register_netdev(dev);
+ err = orinoco_init(priv);
if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
goto fail;
}
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
+ err = orinoco_if_add(priv, 0, 0);
+ if (err) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, priv);
return 0;
fail:
- free_irq(pdev->irq, dev);
+ free_irq(pdev->irq, priv);
fail_irq:
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
fail_alloc:
pci_iounmap(pdev, hermes_io);
@@ -256,17 +257,16 @@
static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = pci_get_drvdata(pdev);
struct orinoco_pci_card *card = priv->card;
/* Clear LEDs */
iowrite16(0, card->bridge_io + 10);
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
+ orinoco_if_del(priv);
+ free_irq(pdev->irq, priv);
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
pci_iounmap(pdev, priv->hw.iobase);
pci_iounmap(pdev, card->attr_io);
pci_iounmap(pdev, card->bridge_io);
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index 78cafff..fea7781 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -116,7 +116,6 @@
int err;
struct orinoco_private *priv;
struct orinoco_pci_card *card;
- struct net_device *dev;
void __iomem *hermes_io;
err = pci_enable_device(pdev);
@@ -139,22 +138,20 @@
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_pci_cor_reset, NULL);
- if (!dev) {
+ priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_pci_cor_reset, NULL);
+ if (!priv) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
goto fail_alloc;
}
- priv = netdev_priv(dev);
card = priv->card;
- SET_NETDEV_DEV(dev, &pdev->dev);
hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
+ DRIVER_NAME, priv);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
err = -EBUSY;
@@ -167,24 +164,28 @@
goto fail;
}
- err = register_netdev(dev);
+ err = orinoco_init(priv);
if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
goto fail;
}
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
+ err = orinoco_if_add(priv, 0, 0);
+ if (err) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, priv);
return 0;
fail:
- free_irq(pdev->irq, dev);
+ free_irq(pdev->irq, priv);
fail_irq:
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
fail_alloc:
pci_iounmap(pdev, hermes_io);
@@ -200,13 +201,12 @@
static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = pci_get_drvdata(pdev);
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
+ orinoco_if_del(priv);
+ free_irq(pdev->irq, priv);
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
pci_iounmap(pdev, priv->hw.iobase);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.h b/drivers/net/wireless/orinoco/orinoco_pci.h
index c655b4a..ea7231a 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.h
+++ b/drivers/net/wireless/orinoco/orinoco_pci.h
@@ -21,30 +21,10 @@
#ifdef CONFIG_PM
static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
+ struct orinoco_private *priv = pci_get_drvdata(pdev);
- err = orinoco_lock(priv, &flags);
- if (err) {
- printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
- dev->name);
- return err;
- }
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: error %d bringing interface down "
- "for suspend\n", dev->name, err);
-
- netif_device_detach(dev);
-
- priv->hw_unavailable++;
-
- orinoco_unlock(priv, &flags);
-
- free_irq(pdev->irq, dev);
+ orinoco_down(priv);
+ free_irq(pdev->irq, priv);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
@@ -54,9 +34,8 @@
static int orinoco_pci_resume(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
+ struct orinoco_private *priv = pci_get_drvdata(pdev);
+ struct net_device *dev = priv->ndev;
int err;
pci_set_power_state(pdev, 0);
@@ -69,7 +48,7 @@
pci_restore_state(pdev);
err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
+ dev->name, priv);
if (err) {
printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
dev->name);
@@ -77,29 +56,9 @@
return -EBUSY;
}
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: error %d re-initializing firmware "
- "on resume\n", dev->name, err);
- return err;
- }
+ err = orinoco_up(priv);
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
-
- priv->hw_unavailable--;
-
- if (priv->open && (!priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card on resume\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
+ return err;
}
#else
#define orinoco_pci_suspend NULL
diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index a2a4471..3f2942a 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -183,7 +183,6 @@
int err;
struct orinoco_private *priv;
struct orinoco_pci_card *card;
- struct net_device *dev;
void __iomem *hermes_io, *attr_io, *bridge_io;
err = pci_enable_device(pdev);
@@ -220,24 +219,22 @@
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_plx_cor_reset, NULL);
- if (!dev) {
+ priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_plx_cor_reset, NULL);
+ if (!priv) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
goto fail_alloc;
}
- priv = netdev_priv(dev);
card = priv->card;
card->bridge_io = bridge_io;
card->attr_io = attr_io;
- SET_NETDEV_DEV(dev, &pdev->dev);
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
+ DRIVER_NAME, priv);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
err = -EBUSY;
@@ -256,24 +253,28 @@
goto fail;
}
- err = register_netdev(dev);
+ err = orinoco_init(priv);
if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
goto fail;
}
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
+ err = orinoco_if_add(priv, 0, 0);
+ if (err) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, priv);
return 0;
fail:
- free_irq(pdev->irq, dev);
+ free_irq(pdev->irq, priv);
fail_irq:
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
fail_alloc:
pci_iounmap(pdev, hermes_io);
@@ -295,14 +296,13 @@
static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = pci_get_drvdata(pdev);
struct orinoco_pci_card *card = priv->card;
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
+ orinoco_if_del(priv);
+ free_irq(pdev->irq, priv);
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
pci_iounmap(pdev, priv->hw.iobase);
pci_iounmap(pdev, card->attr_io);
pci_iounmap(pdev, card->bridge_io);
diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index cda0e6e..d345254 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -94,7 +94,6 @@
int err;
struct orinoco_private *priv;
struct orinoco_pci_card *card;
- struct net_device *dev;
void __iomem *hermes_io, *bridge_io;
err = pci_enable_device(pdev);
@@ -124,23 +123,21 @@
}
/* Allocate network device */
- dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_tmd_cor_reset, NULL);
- if (!dev) {
+ priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
+ orinoco_tmd_cor_reset, NULL);
+ if (!priv) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
goto fail_alloc;
}
- priv = netdev_priv(dev);
card = priv->card;
card->bridge_io = bridge_io;
- SET_NETDEV_DEV(dev, &pdev->dev);
hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, dev);
+ DRIVER_NAME, priv);
if (err) {
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
err = -EBUSY;
@@ -153,24 +150,28 @@
goto fail;
}
- err = register_netdev(dev);
+ err = orinoco_init(priv);
if (err) {
- printk(KERN_ERR PFX "Cannot register network device\n");
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
goto fail;
}
- pci_set_drvdata(pdev, dev);
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
- pci_name(pdev));
+ err = orinoco_if_add(priv, 0, 0);
+ if (err) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, priv);
return 0;
fail:
- free_irq(pdev->irq, dev);
+ free_irq(pdev->irq, priv);
fail_irq:
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
fail_alloc:
pci_iounmap(pdev, hermes_io);
@@ -189,14 +190,13 @@
static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = pci_get_drvdata(pdev);
struct orinoco_pci_card *card = priv->card;
- unregister_netdev(dev);
- free_irq(pdev->irq, dev);
+ orinoco_if_del(priv);
+ free_irq(pdev->irq, priv);
pci_set_drvdata(pdev, NULL);
- free_orinocodev(dev);
+ free_orinocodev(priv);
pci_iounmap(pdev, priv->hw.iobase);
pci_iounmap(pdev, card->bridge_io);
pci_release_regions(pdev);
diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c
index 89d699d..d2f10e9 100644
--- a/drivers/net/wireless/orinoco/scan.c
+++ b/drivers/net/wireless/orinoco/scan.c
@@ -5,147 +5,166 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/etherdevice.h>
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
#include "hermes.h"
#include "orinoco.h"
+#include "main.h"
#include "scan.h"
-#define ORINOCO_MAX_BSS_COUNT 64
+#define ZERO_DBM_OFFSET 0x95
+#define MAX_SIGNAL_LEVEL 0x8A
+#define MIN_SIGNAL_LEVEL 0x2F
-#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data)
-#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data)
+#define SIGNAL_TO_DBM(x) \
+ (clamp_t(s32, (x), MIN_SIGNAL_LEVEL, MAX_SIGNAL_LEVEL) \
+ - ZERO_DBM_OFFSET)
+#define SIGNAL_TO_MBM(x) (SIGNAL_TO_DBM(x) * 100)
-int orinoco_bss_data_allocate(struct orinoco_private *priv)
+static int symbol_build_supp_rates(u8 *buf, const __le16 *rates)
{
- if (priv->bss_xbss_data)
- return 0;
+ int i;
+ u8 rate;
- if (priv->has_ext_scan)
- priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
- sizeof(struct xbss_element),
- GFP_KERNEL);
- else
- priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT *
- sizeof(struct bss_element),
- GFP_KERNEL);
-
- if (!priv->bss_xbss_data) {
- printk(KERN_WARNING "Out of memory allocating beacons");
- return -ENOMEM;
+ buf[0] = WLAN_EID_SUPP_RATES;
+ for (i = 0; i < 5; i++) {
+ rate = le16_to_cpu(rates[i]);
+ /* NULL terminated */
+ if (rate == 0x0)
+ break;
+ buf[i + 2] = rate;
}
- return 0;
+ buf[1] = i;
+
+ return i + 2;
}
-void orinoco_bss_data_free(struct orinoco_private *priv)
-{
- kfree(priv->bss_xbss_data);
- priv->bss_xbss_data = NULL;
-}
-
-void orinoco_bss_data_init(struct orinoco_private *priv)
+static int prism_build_supp_rates(u8 *buf, const u8 *rates)
{
int i;
- INIT_LIST_HEAD(&priv->bss_free_list);
- INIT_LIST_HEAD(&priv->bss_list);
- if (priv->has_ext_scan)
- for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
- list_add_tail(&(PRIV_XBSS[i].list),
- &priv->bss_free_list);
- else
- for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++)
- list_add_tail(&(PRIV_BSS[i].list),
- &priv->bss_free_list);
-
-}
-
-void orinoco_clear_scan_results(struct orinoco_private *priv,
- unsigned long scan_age)
-{
- if (priv->has_ext_scan) {
- struct xbss_element *bss;
- struct xbss_element *tmp_bss;
-
- /* Blow away current list of scan results */
- list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
- if (!scan_age ||
- time_after(jiffies, bss->last_scanned + scan_age)) {
- list_move_tail(&bss->list,
- &priv->bss_free_list);
- /* Don't blow away ->list, just BSS data */
- memset(&bss->bss, 0, sizeof(bss->bss));
- bss->last_scanned = 0;
- }
- }
- } else {
- struct bss_element *bss;
- struct bss_element *tmp_bss;
-
- /* Blow away current list of scan results */
- list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) {
- if (!scan_age ||
- time_after(jiffies, bss->last_scanned + scan_age)) {
- list_move_tail(&bss->list,
- &priv->bss_free_list);
- /* Don't blow away ->list, just BSS data */
- memset(&bss->bss, 0, sizeof(bss->bss));
- bss->last_scanned = 0;
- }
- }
+ buf[0] = WLAN_EID_SUPP_RATES;
+ for (i = 0; i < 8; i++) {
+ /* NULL terminated */
+ if (rates[i] == 0x0)
+ break;
+ buf[i + 2] = rates[i];
}
+ buf[1] = i;
+
+ /* We might still have another 2 rates, which need to go in
+ * extended supported rates */
+ if (i == 8 && rates[i] > 0) {
+ buf[10] = WLAN_EID_EXT_SUPP_RATES;
+ for (; i < 10; i++) {
+ /* NULL terminated */
+ if (rates[i] == 0x0)
+ break;
+ buf[i + 2] = rates[i];
+ }
+ buf[11] = i - 8;
+ }
+
+ return (i < 8) ? i + 2 : i + 4;
}
-void orinoco_add_ext_scan_result(struct orinoco_private *priv,
- struct agere_ext_scan_info *atom)
+static void orinoco_add_hostscan_result(struct orinoco_private *priv,
+ const union hermes_scan_info *bss)
{
- struct xbss_element *bss = NULL;
- int found = 0;
+ struct wiphy *wiphy = priv_to_wiphy(priv);
+ struct ieee80211_channel *channel;
+ u8 *ie;
+ u8 ie_buf[46];
+ u64 timestamp;
+ s32 signal;
+ u16 capability;
+ u16 beacon_interval;
+ int ie_len;
+ int freq;
+ int len;
- /* Try to update an existing bss first */
- list_for_each_entry(bss, &priv->bss_list, list) {
- if (compare_ether_addr(bss->bss.bssid, atom->bssid))
- continue;
- /* ESSID lengths */
- if (bss->bss.data[1] != atom->data[1])
- continue;
- if (memcmp(&bss->bss.data[2], &atom->data[2],
- atom->data[1]))
- continue;
- found = 1;
+ len = le16_to_cpu(bss->a.essid_len);
+
+ /* Reconstruct SSID and bitrate IEs to pass up */
+ ie_buf[0] = WLAN_EID_SSID;
+ ie_buf[1] = len;
+ memcpy(&ie_buf[2], bss->a.essid, len);
+
+ ie = ie_buf + len + 2;
+ ie_len = ie_buf[1] + 2;
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_SYMBOL:
+ ie_len += symbol_build_supp_rates(ie, bss->s.rates);
+ break;
+
+ case FIRMWARE_TYPE_INTERSIL:
+ ie_len += prism_build_supp_rates(ie, bss->p.rates);
+ break;
+
+ case FIRMWARE_TYPE_AGERE:
+ default:
break;
}
- /* Grab a bss off the free list */
- if (!found && !list_empty(&priv->bss_free_list)) {
- bss = list_entry(priv->bss_free_list.next,
- struct xbss_element, list);
- list_del(priv->bss_free_list.next);
+ freq = ieee80211_dsss_chan_to_freq(le16_to_cpu(bss->a.channel));
+ channel = ieee80211_get_channel(wiphy, freq);
+ timestamp = 0;
+ capability = le16_to_cpu(bss->a.capabilities);
+ beacon_interval = le16_to_cpu(bss->a.beacon_interv);
+ signal = SIGNAL_TO_MBM(le16_to_cpu(bss->a.level));
- list_add_tail(&bss->list, &priv->bss_list);
- }
-
- if (bss) {
- /* Always update the BSS to get latest beacon info */
- memcpy(&bss->bss, atom, sizeof(bss->bss));
- bss->last_scanned = jiffies;
- }
+ cfg80211_inform_bss(wiphy, channel, bss->a.bssid, timestamp,
+ capability, beacon_interval, ie_buf, ie_len,
+ signal, GFP_KERNEL);
}
-int orinoco_process_scan_results(struct orinoco_private *priv,
- unsigned char *buf,
- int len)
+void orinoco_add_extscan_result(struct orinoco_private *priv,
+ struct agere_ext_scan_info *bss,
+ size_t len)
{
- int offset; /* In the scan data */
- union hermes_scan_info *atom;
- int atom_len;
+ struct wiphy *wiphy = priv_to_wiphy(priv);
+ struct ieee80211_channel *channel;
+ u8 *ie;
+ u64 timestamp;
+ s32 signal;
+ u16 capability;
+ u16 beacon_interval;
+ size_t ie_len;
+ int chan, freq;
+
+ ie_len = len - sizeof(*bss);
+ ie = orinoco_get_ie(bss->data, ie_len, WLAN_EID_DS_PARAMS);
+ chan = ie ? ie[2] : 0;
+ freq = ieee80211_dsss_chan_to_freq(chan);
+ channel = ieee80211_get_channel(wiphy, freq);
+
+ timestamp = le64_to_cpu(bss->timestamp);
+ capability = le16_to_cpu(bss->capabilities);
+ beacon_interval = le16_to_cpu(bss->beacon_interval);
+ ie = bss->data;
+ signal = SIGNAL_TO_MBM(bss->level);
+
+ cfg80211_inform_bss(wiphy, channel, bss->bssid, timestamp,
+ capability, beacon_interval, ie, ie_len,
+ signal, GFP_KERNEL);
+}
+
+void orinoco_add_hostscan_results(struct orinoco_private *priv,
+ unsigned char *buf,
+ size_t len)
+{
+ int offset; /* In the scan data */
+ size_t atom_len;
+ bool abort = false;
switch (priv->firmware_type) {
case FIRMWARE_TYPE_AGERE:
atom_len = sizeof(struct agere_scan_apinfo);
offset = 0;
break;
+
case FIRMWARE_TYPE_SYMBOL:
/* Lack of documentation necessitates this hack.
* Different firmwares have 68 or 76 byte long atoms.
@@ -163,6 +182,7 @@
atom_len = 68;
offset = 0;
break;
+
case FIRMWARE_TYPE_INTERSIL:
offset = 4;
if (priv->has_hostscan) {
@@ -170,64 +190,41 @@
/* Sanity check for atom_len */
if (atom_len < sizeof(struct prism2_scan_apinfo)) {
printk(KERN_ERR "%s: Invalid atom_len in scan "
- "data: %d\n", priv->ndev->name,
+ "data: %zu\n", priv->ndev->name,
atom_len);
- return -EIO;
+ abort = true;
+ goto scan_abort;
}
} else
atom_len = offsetof(struct prism2_scan_apinfo, atim);
break;
+
default:
- return -EOPNOTSUPP;
+ abort = true;
+ goto scan_abort;
}
/* Check that we got an whole number of atoms */
if ((len - offset) % atom_len) {
- printk(KERN_ERR "%s: Unexpected scan data length %d, "
- "atom_len %d, offset %d\n", priv->ndev->name, len,
+ printk(KERN_ERR "%s: Unexpected scan data length %zu, "
+ "atom_len %zu, offset %d\n", priv->ndev->name, len,
atom_len, offset);
- return -EIO;
+ abort = true;
+ goto scan_abort;
}
- orinoco_clear_scan_results(priv, msecs_to_jiffies(15000));
-
- /* Read the entries one by one */
+ /* Process the entries one by one */
for (; offset + atom_len <= len; offset += atom_len) {
- int found = 0;
- struct bss_element *bss = NULL;
+ union hermes_scan_info *atom;
- /* Get next atom */
atom = (union hermes_scan_info *) (buf + offset);
- /* Try to update an existing bss first */
- list_for_each_entry(bss, &priv->bss_list, list) {
- if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid))
- continue;
- if (le16_to_cpu(bss->bss.a.essid_len) !=
- le16_to_cpu(atom->a.essid_len))
- continue;
- if (memcmp(bss->bss.a.essid, atom->a.essid,
- le16_to_cpu(atom->a.essid_len)))
- continue;
- found = 1;
- break;
- }
-
- /* Grab a bss off the free list */
- if (!found && !list_empty(&priv->bss_free_list)) {
- bss = list_entry(priv->bss_free_list.next,
- struct bss_element, list);
- list_del(priv->bss_free_list.next);
-
- list_add_tail(&bss->list, &priv->bss_list);
- }
-
- if (bss) {
- /* Always update the BSS to get latest beacon info */
- memcpy(&bss->bss, atom, sizeof(bss->bss));
- bss->last_scanned = jiffies;
- }
+ orinoco_add_hostscan_result(priv, atom);
}
- return 0;
+ scan_abort:
+ if (priv->scan_request) {
+ cfg80211_scan_done(priv->scan_request, abort);
+ priv->scan_request = NULL;
+ }
}
diff --git a/drivers/net/wireless/orinoco/scan.h b/drivers/net/wireless/orinoco/scan.h
index f319f74..2dc4e04 100644
--- a/drivers/net/wireless/orinoco/scan.h
+++ b/drivers/net/wireless/orinoco/scan.h
@@ -9,21 +9,12 @@
struct orinoco_private;
struct agere_ext_scan_info;
-/* Setup and free memory for scan results */
-int orinoco_bss_data_allocate(struct orinoco_private *priv);
-void orinoco_bss_data_free(struct orinoco_private *priv);
-void orinoco_bss_data_init(struct orinoco_private *priv);
-
/* Add scan results */
-void orinoco_add_ext_scan_result(struct orinoco_private *priv,
- struct agere_ext_scan_info *atom);
-int orinoco_process_scan_results(struct orinoco_private *dev,
- unsigned char *buf,
- int len);
-
-/* Clear scan results */
-void orinoco_clear_scan_results(struct orinoco_private *priv,
- unsigned long scan_age);
-
+void orinoco_add_extscan_result(struct orinoco_private *priv,
+ struct agere_ext_scan_info *atom,
+ size_t len);
+void orinoco_add_hostscan_results(struct orinoco_private *dev,
+ unsigned char *buf,
+ size_t len);
#endif /* _ORINOCO_SCAN_H_ */
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 38e5198..c361310 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -178,27 +178,25 @@
static int
spectrum_cs_probe(struct pcmcia_device *link)
{
- struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
- dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
- spectrum_cs_hard_reset,
- spectrum_cs_stop_firmware);
- if (!dev)
+ priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+ spectrum_cs_hard_reset,
+ spectrum_cs_stop_firmware);
+ if (!priv)
return -ENOMEM;
- priv = netdev_priv(dev);
card = priv->card;
/* Link both structures together */
card->p_dev = link;
- link->priv = dev;
+ link->priv = priv;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = orinoco_interrupt;
- link->irq.Instance = dev;
+ link->irq.Instance = priv;
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
@@ -219,14 +217,14 @@
*/
static void spectrum_cs_detach(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
+ struct orinoco_private *priv = link->priv;
if (link->dev_node)
- unregister_netdev(dev);
+ orinoco_if_del(priv);
spectrum_cs_release(link);
- free_orinocodev(dev);
+ free_orinocodev(priv);
} /* spectrum_cs_detach */
/*
@@ -306,8 +304,7 @@
static int
spectrum_cs_config(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
@@ -362,34 +359,31 @@
pcmcia_request_configuration(link, &link->conf));
/* Ok, we have the configuration, prepare to register the netdev */
- dev->base_addr = link->io.BasePort1;
- dev->irq = link->irq.AssignedIRQ;
card->node.major = card->node.minor = 0;
/* Reset card */
if (spectrum_cs_hard_reset(priv) != 0)
goto failed;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
- /* Tell the stack we exist */
- if (register_netdev(dev) != 0) {
- printk(KERN_ERR PFX "register_netdev() failed\n");
+ /* Initialise the main driver */
+ if (orinoco_init(priv) != 0) {
+ printk(KERN_ERR PFX "orinoco_init() failed\n");
+ goto failed;
+ }
+
+ /* Register an interface with the stack */
+ if (orinoco_if_add(priv, link->io.BasePort1,
+ link->irq.AssignedIRQ) != 0) {
+ printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
/* At this point, the dev_node_t structure(s) needs to be
* initialized and arranged in a linked list at link->dev_node. */
- strcpy(card->node.dev_name, dev->name);
+ strcpy(card->node.dev_name, priv->ndev->name);
link->dev_node = &card->node; /* link->dev_node being non-NULL is also
* used to indicate that the
* net_device has been registered */
-
- /* Finally, report what we've done */
- printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
- "0x%04x-0x%04x\n", dev->name, dev_name(dev->dev.parent),
- link->irq.AssignedIRQ, link->io.BasePort1,
- link->io.BasePort1 + link->io.NumPorts1 - 1);
-
return 0;
cs_failed:
@@ -408,8 +402,7 @@
static void
spectrum_cs_release(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = link->priv;
unsigned long flags;
/* We're committed to taking the device away now, so mark the
@@ -427,23 +420,11 @@
static int
spectrum_cs_suspend(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
+ struct orinoco_private *priv = link->priv;
int err = 0;
/* Mark the device as stopped, to block IO until later */
- spin_lock_irqsave(&priv->lock, flags);
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
-
- spin_unlock_irqrestore(&priv->lock, flags);
+ orinoco_down(priv);
return err;
}
@@ -451,33 +432,10 @@
static int
spectrum_cs_resume(struct pcmcia_device *link)
{
- struct net_device *dev = link->priv;
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
+ struct orinoco_private *priv = link->priv;
+ int err = orinoco_up(priv);
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
- dev->name, err);
- return -EIO;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
-
- if (priv->open && !priv->hw_unavailable) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
+ return err;
}
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 3f08142..7698fdd 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -7,6 +7,7 @@
#include <linux/wireless.h>
#include <linux/ieee80211.h>
#include <net/iw_handler.h>
+#include <net/cfg80211.h>
#include "hermes.h"
#include "hermes_rid.h"
@@ -21,9 +22,70 @@
#define MAX_RID_LEN 1024
+/* Helper routine to record keys
+ * Do not call from interrupt context */
+static int orinoco_set_key(struct orinoco_private *priv, int index,
+ enum orinoco_alg alg, const u8 *key, int key_len,
+ const u8 *seq, int seq_len)
+{
+ kzfree(priv->keys[index].key);
+ kzfree(priv->keys[index].seq);
+
+ if (key_len) {
+ priv->keys[index].key = kzalloc(key_len, GFP_KERNEL);
+ if (!priv->keys[index].key)
+ goto nomem;
+ } else
+ priv->keys[index].key = NULL;
+
+ if (seq_len) {
+ priv->keys[index].seq = kzalloc(seq_len, GFP_KERNEL);
+ if (!priv->keys[index].seq)
+ goto free_key;
+ } else
+ priv->keys[index].seq = NULL;
+
+ priv->keys[index].key_len = key_len;
+ priv->keys[index].seq_len = seq_len;
+
+ if (key_len)
+ memcpy(priv->keys[index].key, key, key_len);
+ if (seq_len)
+ memcpy(priv->keys[index].seq, seq, seq_len);
+
+ switch (alg) {
+ case ORINOCO_ALG_TKIP:
+ priv->keys[index].cipher = WLAN_CIPHER_SUITE_TKIP;
+ break;
+
+ case ORINOCO_ALG_WEP:
+ priv->keys[index].cipher = (key_len > SMALL_KEY_SIZE) ?
+ WLAN_CIPHER_SUITE_WEP104 : WLAN_CIPHER_SUITE_WEP40;
+ break;
+
+ case ORINOCO_ALG_NONE:
+ default:
+ priv->keys[index].cipher = 0;
+ break;
+ }
+
+ return 0;
+
+free_key:
+ kfree(priv->keys[index].key);
+ priv->keys[index].key = NULL;
+
+nomem:
+ priv->keys[index].key_len = 0;
+ priv->keys[index].seq_len = 0;
+ priv->keys[index].cipher = 0;
+
+ return -ENOMEM;
+}
+
static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
struct iw_statistics *wstats = &priv->wstats;
int err;
@@ -51,7 +113,7 @@
* here so we're not safe to sleep here. */
hermes_inquire(hw, HERMES_INQ_TALLIES);
- if (priv->iw_mode == IW_MODE_ADHOC) {
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC) {
memset(&wstats->qual, 0, sizeof(wstats->qual));
/* If a spy address is defined, we report stats of the
* first spy address - Jean II */
@@ -87,31 +149,12 @@
/* Wireless extensions */
/********************************************************************/
-static int orinoco_ioctl_getname(struct net_device *dev,
- struct iw_request_info *info,
- char *name,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int numrates;
- int err;
-
- err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
-
- if (!err && (numrates > 2))
- strcpy(name, "IEEE 802.11b");
- else
- strcpy(name, "IEEE 802.11-DS");
-
- return 0;
-}
-
static int orinoco_ioctl_setwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
@@ -142,7 +185,7 @@
goto out;
}
- if (priv->iw_mode != IW_MODE_INFRA) {
+ if (priv->iw_mode != NL80211_IFTYPE_STATION) {
printk(KERN_WARNING "%s: Manual roaming supported only in "
"managed mode\n", dev->name);
err = -EOPNOTSUPP;
@@ -172,9 +215,8 @@
struct sockaddr *ap_addr,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
- hermes_t *hw = &priv->hw;
int err = 0;
unsigned long flags;
@@ -182,197 +224,23 @@
return -EBUSY;
ap_addr->sa_family = ARPHRD_ETHER;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, ap_addr->sa_data);
+ err = orinoco_hw_get_current_bssid(priv, ap_addr->sa_data);
orinoco_unlock(priv, &flags);
return err;
}
-static int orinoco_ioctl_setmode(struct net_device *dev,
- struct iw_request_info *info,
- u32 *mode,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (priv->iw_mode == *mode)
- return 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (*mode) {
- case IW_MODE_ADHOC:
- if (!priv->has_ibss && !priv->has_port3)
- err = -EOPNOTSUPP;
- break;
-
- case IW_MODE_INFRA:
- break;
-
- case IW_MODE_MONITOR:
- if (priv->broken_monitor && !force_monitor) {
- printk(KERN_WARNING "%s: Monitor mode support is "
- "buggy in this firmware, not enabling\n",
- dev->name);
- err = -EOPNOTSUPP;
- }
- break;
-
- default:
- err = -EOPNOTSUPP;
- break;
- }
-
- if (err == -EINPROGRESS) {
- priv->iw_mode = *mode;
- set_port_type(priv);
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getmode(struct net_device *dev,
- struct iw_request_info *info,
- u32 *mode,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
-
- *mode = priv->iw_mode;
- return 0;
-}
-
-static int orinoco_ioctl_getiwrange(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *rrq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
- struct iw_range *range = (struct iw_range *) extra;
- int numrates;
- int i, k;
-
- rrq->length = sizeof(struct iw_range);
- memset(range, 0, sizeof(struct iw_range));
-
- range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 22;
-
- /* Set available channels/frequencies */
- range->num_channels = NUM_CHANNELS;
- k = 0;
- for (i = 0; i < NUM_CHANNELS; i++) {
- if (priv->channel_mask & (1 << i)) {
- range->freq[k].i = i + 1;
- range->freq[k].m = (ieee80211_dsss_chan_to_freq(i + 1) *
- 100000);
- range->freq[k].e = 1;
- k++;
- }
-
- if (k >= IW_MAX_FREQUENCIES)
- break;
- }
- range->num_frequency = k;
- range->sensitivity = 3;
-
- if (priv->has_wep) {
- range->max_encoding_tokens = ORINOCO_MAX_KEYS;
- range->encoding_size[0] = SMALL_KEY_SIZE;
- range->num_encoding_sizes = 1;
-
- if (priv->has_big_wep) {
- range->encoding_size[1] = LARGE_KEY_SIZE;
- range->num_encoding_sizes = 2;
- }
- }
-
- if (priv->has_wpa)
- range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP;
-
- if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))) {
- /* Quality stats meaningless in ad-hoc mode */
- } else {
- range->max_qual.qual = 0x8b - 0x2f;
- range->max_qual.level = 0x2f - 0x95 - 1;
- range->max_qual.noise = 0x2f - 0x95 - 1;
- /* Need to get better values */
- range->avg_qual.qual = 0x24;
- range->avg_qual.level = 0xC2;
- range->avg_qual.noise = 0x9E;
- }
-
- err = orinoco_hw_get_bitratelist(priv, &numrates,
- range->bitrate, IW_MAX_BITRATES);
- if (err)
- return err;
- range->num_bitrates = numrates;
-
- /* Set an indication of the max TCP throughput in bit/s that we can
- * expect using this interface. May be use for QoS stuff...
- * Jean II */
- if (numrates > 2)
- range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
- else
- range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
-
- range->min_rts = 0;
- range->max_rts = 2347;
- range->min_frag = 256;
- range->max_frag = 2346;
-
- range->min_pmp = 0;
- range->max_pmp = 65535000;
- range->min_pmt = 0;
- range->max_pmt = 65535 * 1000; /* ??? */
- range->pmp_flags = IW_POWER_PERIOD;
- range->pmt_flags = IW_POWER_TIMEOUT;
- range->pm_capa = (IW_POWER_PERIOD | IW_POWER_TIMEOUT |
- IW_POWER_UNICAST_R);
-
- range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
- range->retry_flags = IW_RETRY_LIMIT;
- range->r_time_flags = IW_RETRY_LIFETIME;
- range->min_retry = 0;
- range->max_retry = 65535; /* ??? */
- range->min_r_time = 0;
- range->max_r_time = 65535 * 1000; /* ??? */
-
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
- range->scan_capa = IW_SCAN_CAPA_ESSID;
- else
- range->scan_capa = IW_SCAN_CAPA_NONE;
-
- /* Event capability (kernel) */
- IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
- /* Event capability (driver) */
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
- IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
-
- return 0;
-}
-
static int orinoco_ioctl_setiwencode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq,
char *keybuf)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
int setindex = priv->tx_key;
- int encode_alg = priv->encode_alg;
+ enum orinoco_alg encode_alg = priv->encode_alg;
int restricted = priv->wep_restrict;
- u16 xlen = 0;
int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
@@ -392,25 +260,17 @@
return -EBUSY;
/* Clear any TKIP key we have */
- if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP))
+ if ((priv->has_wpa) && (priv->encode_alg == ORINOCO_ALG_TKIP))
(void) orinoco_clear_tkip_key(priv, setindex);
if (erq->length > 0) {
if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
index = priv->tx_key;
- /* Adjust key length to a supported value */
- if (erq->length > SMALL_KEY_SIZE)
- xlen = LARGE_KEY_SIZE;
- else if (erq->length > 0)
- xlen = SMALL_KEY_SIZE;
- else
- xlen = 0;
-
/* Switch on WEP if off */
- if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) {
+ if (encode_alg != ORINOCO_ALG_WEP) {
setindex = index;
- encode_alg = IW_ENCODE_ALG_WEP;
+ encode_alg = ORINOCO_ALG_WEP;
}
} else {
/* Important note : if the user do "iwconfig eth0 enc off",
@@ -423,7 +283,7 @@
}
} else {
/* Set the index : Check that the key is valid */
- if (priv->keys[index].len == 0) {
+ if (priv->keys[index].key_len == 0) {
err = -EINVAL;
goto out;
}
@@ -432,17 +292,15 @@
}
if (erq->flags & IW_ENCODE_DISABLED)
- encode_alg = IW_ENCODE_ALG_NONE;
+ encode_alg = ORINOCO_ALG_NONE;
if (erq->flags & IW_ENCODE_OPEN)
restricted = 0;
if (erq->flags & IW_ENCODE_RESTRICTED)
restricted = 1;
if (erq->pointer && erq->length > 0) {
- priv->keys[index].len = cpu_to_le16(xlen);
- memset(priv->keys[index].data, 0,
- sizeof(priv->keys[index].data));
- memcpy(priv->keys[index].data, keybuf, erq->length);
+ err = orinoco_set_key(priv, index, ORINOCO_ALG_WEP, keybuf,
+ erq->length, NULL, 0);
}
priv->tx_key = setindex;
@@ -469,9 +327,8 @@
struct iw_point *erq,
char *keybuf)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- u16 xlen = 0;
unsigned long flags;
if (!priv->has_wep)
@@ -493,11 +350,9 @@
else
erq->flags |= IW_ENCODE_OPEN;
- xlen = le16_to_cpu(priv->keys[index].len);
+ erq->length = priv->keys[index].key_len;
- erq->length = xlen;
-
- memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
+ memcpy(keybuf, priv->keys[index].key, erq->length);
orinoco_unlock(priv, &flags);
return 0;
@@ -508,7 +363,7 @@
struct iw_point *erq,
char *essidbuf)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
@@ -539,7 +394,7 @@
struct iw_point *erq,
char *essidbuf)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int active;
int err = 0;
unsigned long flags;
@@ -562,59 +417,18 @@
return 0;
}
-static int orinoco_ioctl_setnick(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *nrq,
- char *nickbuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- if (nrq->length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- memset(priv->nick, 0, sizeof(priv->nick));
- memcpy(priv->nick, nickbuf, nrq->length);
-
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getnick(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *nrq,
- char *nickbuf)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE);
- orinoco_unlock(priv, &flags);
-
- nrq->length = strlen(priv->nick);
-
- return 0;
-}
-
static int orinoco_ioctl_setfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *frq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int chan = -1;
unsigned long flags;
int err = -EINPROGRESS; /* Call commit handler */
/* In infrastructure mode the AP sets the channel */
- if (priv->iw_mode == IW_MODE_INFRA)
+ if (priv->iw_mode == NL80211_IFTYPE_STATION)
return -EBUSY;
if ((frq->e == 0) && (frq->m <= 1000)) {
@@ -640,7 +454,7 @@
return -EBUSY;
priv->channel = chan;
- if (priv->iw_mode == IW_MODE_MONITOR) {
+ if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
/* Fast channel change - no commit if successful */
hermes_t *hw = &priv->hw;
err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
@@ -657,7 +471,7 @@
struct iw_freq *frq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int tmp;
/* Locking done in there */
@@ -676,7 +490,7 @@
struct iw_param *srq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
u16 val;
int err;
@@ -705,7 +519,7 @@
struct iw_param *srq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int val = srq->value;
unsigned long flags;
@@ -728,7 +542,7 @@
struct iw_param *rrq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int val = rrq->value;
unsigned long flags;
@@ -752,7 +566,7 @@
struct iw_param *rrq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
rrq->value = priv->rts_thresh;
rrq->disabled = (rrq->value == 2347);
@@ -766,7 +580,7 @@
struct iw_param *frq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
@@ -806,7 +620,7 @@
struct iw_param *frq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
int err;
u16 val;
@@ -847,7 +661,7 @@
struct iw_param *rrq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int ratemode;
int bitrate; /* 100s of kilobits */
unsigned long flags;
@@ -881,7 +695,7 @@
struct iw_param *rrq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int err = 0;
int bitrate, automatic;
unsigned long flags;
@@ -910,7 +724,7 @@
struct iw_param *prq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
@@ -964,7 +778,7 @@
struct iw_param *prq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
int err = 0;
u16 enable, period, timeout, mcast;
@@ -1018,13 +832,12 @@
union iwreq_data *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct iw_point *encoding = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int idx, alg = ext->alg, set_key = 1;
unsigned long flags;
int err = -EINVAL;
- u16 key_len;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
@@ -1056,48 +869,41 @@
/* Set the requested key first */
switch (alg) {
case IW_ENCODE_ALG_NONE:
- priv->encode_alg = alg;
- priv->keys[idx].len = 0;
+ priv->encode_alg = ORINOCO_ALG_NONE;
+ err = orinoco_set_key(priv, idx, ORINOCO_ALG_NONE,
+ NULL, 0, NULL, 0);
break;
case IW_ENCODE_ALG_WEP:
- if (ext->key_len > SMALL_KEY_SIZE)
- key_len = LARGE_KEY_SIZE;
- else if (ext->key_len > 0)
- key_len = SMALL_KEY_SIZE;
- else
+ if (ext->key_len <= 0)
goto out;
- priv->encode_alg = alg;
- priv->keys[idx].len = cpu_to_le16(key_len);
-
- key_len = min(ext->key_len, key_len);
-
- memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE);
- memcpy(priv->keys[idx].data, ext->key, key_len);
+ priv->encode_alg = ORINOCO_ALG_WEP;
+ err = orinoco_set_key(priv, idx, ORINOCO_ALG_WEP,
+ ext->key, ext->key_len, NULL, 0);
break;
case IW_ENCODE_ALG_TKIP:
{
- hermes_t *hw = &priv->hw;
u8 *tkip_iv = NULL;
if (!priv->has_wpa ||
- (ext->key_len > sizeof(priv->tkip_key[0])))
+ (ext->key_len > sizeof(struct orinoco_tkip_key)))
goto out;
- priv->encode_alg = alg;
- memset(&priv->tkip_key[idx], 0,
- sizeof(priv->tkip_key[idx]));
- memcpy(&priv->tkip_key[idx], ext->key, ext->key_len);
+ priv->encode_alg = ORINOCO_ALG_TKIP;
if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
tkip_iv = &ext->rx_seq[0];
- err = __orinoco_hw_set_tkip_key(hw, idx,
+ err = orinoco_set_key(priv, idx, ORINOCO_ALG_TKIP,
+ ext->key, ext->key_len, tkip_iv,
+ ORINOCO_SEQ_LEN);
+
+ err = __orinoco_hw_set_tkip_key(priv, idx,
ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
- (u8 *) &priv->tkip_key[idx],
- tkip_iv, NULL);
+ priv->keys[idx].key,
+ tkip_iv, ORINOCO_SEQ_LEN, NULL, 0);
if (err)
printk(KERN_ERR "%s: Error %d setting TKIP key"
"\n", dev->name, err);
@@ -1120,7 +926,7 @@
union iwreq_data *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct iw_point *encoding = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int idx, max_key_len;
@@ -1146,22 +952,22 @@
encoding->flags = idx + 1;
memset(ext, 0, sizeof(*ext));
- ext->alg = priv->encode_alg;
switch (priv->encode_alg) {
- case IW_ENCODE_ALG_NONE:
+ case ORINOCO_ALG_NONE:
+ ext->alg = IW_ENCODE_ALG_NONE;
ext->key_len = 0;
encoding->flags |= IW_ENCODE_DISABLED;
break;
- case IW_ENCODE_ALG_WEP:
- ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len),
- max_key_len);
- memcpy(ext->key, priv->keys[idx].data, ext->key_len);
+ case ORINOCO_ALG_WEP:
+ ext->alg = IW_ENCODE_ALG_WEP;
+ ext->key_len = min(priv->keys[idx].key_len, max_key_len);
+ memcpy(ext->key, priv->keys[idx].key, ext->key_len);
encoding->flags |= IW_ENCODE_ENABLED;
break;
- case IW_ENCODE_ALG_TKIP:
- ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key),
- max_key_len);
- memcpy(ext->key, &priv->tkip_key[idx], ext->key_len);
+ case ORINOCO_ALG_TKIP:
+ ext->alg = IW_ENCODE_ALG_TKIP;
+ ext->key_len = min(priv->keys[idx].key_len, max_key_len);
+ memcpy(ext->key, priv->keys[idx].key, ext->key_len);
encoding->flags |= IW_ENCODE_ENABLED;
break;
}
@@ -1177,7 +983,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
struct iw_param *param = &wrqu->param;
unsigned long flags;
@@ -1255,7 +1061,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
struct iw_param *param = &wrqu->param;
unsigned long flags;
int ret = 0;
@@ -1295,7 +1101,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
u8 *buf;
unsigned long flags;
@@ -1338,7 +1144,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
int err = 0;
@@ -1367,8 +1173,7 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
+ struct orinoco_private *priv = ndev_priv(dev);
struct iw_mlme *mlme = (struct iw_mlme *)extra;
unsigned long flags;
int ret = 0;
@@ -1382,19 +1187,11 @@
break;
case IW_MLME_DISASSOC:
- {
- struct {
- u8 addr[ETH_ALEN];
- __le16 reason_code;
- } __attribute__ ((packed)) buf;
- memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN);
- buf.reason_code = cpu_to_le16(mlme->reason_code);
- ret = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFDISASSOCIATE,
- &buf);
+ ret = orinoco_hw_disassociate(priv, mlme->addr.sa_data,
+ mlme->reason_code);
break;
- }
+
default:
ret = -EOPNOTSUPP;
}
@@ -1408,7 +1205,7 @@
struct iw_param *rrq,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
int err = 0;
u16 short_limit, long_limit, lifetime;
@@ -1462,7 +1259,7 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
@@ -1487,14 +1284,14 @@
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int val = *((int *) extra);
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- priv->ibss_port = val ;
+ priv->ibss_port = val;
/* Actually update the mode we are using */
set_port_type(priv);
@@ -1508,7 +1305,7 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int *val = (int *) extra;
*val = priv->ibss_port;
@@ -1520,7 +1317,7 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int val = *((int *) extra);
int err = 0;
unsigned long flags;
@@ -1566,7 +1363,7 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int *val = (int *) extra;
*val = priv->prefer_port3;
@@ -1578,7 +1375,7 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
int val;
@@ -1610,7 +1407,7 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
int *val = (int *) extra;
if (!priv->has_preamble)
@@ -1630,7 +1427,7 @@
struct iw_point *data,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_private *priv = ndev_priv(dev);
hermes_t *hw = &priv->hw;
int rid = data->flags;
u16 length;
@@ -1661,519 +1458,6 @@
return err;
}
-/* Trigger a scan (look for other cells in the vicinity) */
-static int orinoco_ioctl_setscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- hermes_t *hw = &priv->hw;
- struct iw_scan_req *si = (struct iw_scan_req *) extra;
- int err = 0;
- unsigned long flags;
-
- /* Note : you may have realised that, as this is a SET operation,
- * this is privileged and therefore a normal user can't
- * perform scanning.
- * This is not an error, while the device perform scanning,
- * traffic doesn't flow, so it's a perfect DoS...
- * Jean II */
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Scanning with port 0 disabled would fail */
- if (!netif_running(dev)) {
- err = -ENETDOWN;
- goto out;
- }
-
- /* In monitor mode, the scan results are always empty.
- * Probe responses are passed to the driver as received
- * frames and could be processed in software. */
- if (priv->iw_mode == IW_MODE_MONITOR) {
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Note : because we don't lock out the irq handler, the way
- * we access scan variables in priv is critical.
- * o scan_inprogress : not touched by irq handler
- * o scan_mode : not touched by irq handler
- * Before modifying anything on those variables, please think hard !
- * Jean II */
-
- /* Save flags */
- priv->scan_mode = srq->flags;
-
- /* Always trigger scanning, even if it's in progress.
- * This way, if the info frame get lost, we will recover somewhat
- * gracefully - Jean II */
-
- if (priv->has_hostscan) {
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_SYMBOL:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFHOSTSCAN_SYMBOL,
- HERMES_HOSTSCAN_SYMBOL_ONCE |
- HERMES_HOSTSCAN_SYMBOL_BCAST);
- break;
- case FIRMWARE_TYPE_INTERSIL: {
- __le16 req[3];
-
- req[0] = cpu_to_le16(0x3fff); /* All channels */
- req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
- req[2] = 0; /* Any ESSID */
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFHOSTSCAN, &req);
- }
- break;
- case FIRMWARE_TYPE_AGERE:
- if (priv->scan_mode & IW_SCAN_THIS_ESSID) {
- struct hermes_idstring idbuf;
- size_t len = min(sizeof(idbuf.val),
- (size_t) si->essid_len);
- idbuf.len = cpu_to_le16(len);
- memcpy(idbuf.val, si->essid, len);
-
- err = hermes_write_ltv(hw, USER_BAP,
- HERMES_RID_CNFSCANSSID_AGERE,
- HERMES_BYTES_TO_RECLEN(len + 2),
- &idbuf);
- } else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSCANSSID_AGERE,
- 0); /* Any ESSID */
- if (err)
- break;
-
- if (priv->has_ext_scan) {
- /* Clear scan results at the start of
- * an extended scan */
- orinoco_clear_scan_results(priv,
- msecs_to_jiffies(15000));
-
- /* TODO: Is this available on older firmware?
- * Can we use it to scan specific channels
- * for IW_SCAN_THIS_FREQ? */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSCANCHANNELS2GHZ,
- 0x7FFF);
- if (err)
- goto out;
-
- err = hermes_inquire(hw,
- HERMES_INQ_CHANNELINFO);
- } else
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
- break;
- }
- } else
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
-
- /* One more client */
- if (!err)
- priv->scan_inprogress = 1;
-
- out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-#define MAX_CUSTOM_LEN 64
-
-/* Translate scan data returned from the card to a card independant
- * format that the Wireless Tools will understand - Jean II */
-static inline char *orinoco_translate_scan(struct net_device *dev,
- struct iw_request_info *info,
- char *current_ev,
- char *end_buf,
- union hermes_scan_info *bss,
- unsigned long last_scanned)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- u16 capabilities;
- u16 channel;
- struct iw_event iwe; /* Temporary buffer */
- char custom[MAX_CUSTOM_LEN];
-
- memset(&iwe, 0, sizeof(iwe));
-
- /* First entry *MUST* be the AP MAC address */
- iwe.cmd = SIOCGIWAP;
- iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN);
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_ADDR_LEN);
-
- /* Other entries will be displayed in the order we give them */
-
- /* Add the ESSID */
- iwe.u.data.length = le16_to_cpu(bss->a.essid_len);
- if (iwe.u.data.length > 32)
- iwe.u.data.length = 32;
- iwe.cmd = SIOCGIWESSID;
- iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, bss->a.essid);
-
- /* Add mode */
- iwe.cmd = SIOCGIWMODE;
- capabilities = le16_to_cpu(bss->a.capabilities);
- if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
- if (capabilities & WLAN_CAPABILITY_ESS)
- iwe.u.mode = IW_MODE_MASTER;
- else
- iwe.u.mode = IW_MODE_ADHOC;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_UINT_LEN);
- }
-
- channel = bss->s.channel;
- if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
- /* Add channel and frequency */
- iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = channel;
- iwe.u.freq.e = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
-
- iwe.u.freq.m = ieee80211_dsss_chan_to_freq(channel) * 100000;
- iwe.u.freq.e = 1;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
- }
-
- /* Add quality statistics. level and noise in dB. No link quality */
- iwe.cmd = IWEVQUAL;
- iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
- iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95;
- iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95;
- /* Wireless tools prior to 27.pre22 will show link quality
- * anyway, so we provide a reasonable value. */
- if (iwe.u.qual.level > iwe.u.qual.noise)
- iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
- else
- iwe.u.qual.qual = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_QUAL_LEN);
-
- /* Add encryption capability */
- iwe.cmd = SIOCGIWENCODE;
- if (capabilities & WLAN_CAPABILITY_PRIVACY)
- iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
- else
- iwe.u.data.flags = IW_ENCODE_DISABLED;
- iwe.u.data.length = 0;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, NULL);
-
- /* Bit rate is not available in Lucent/Agere firmwares */
- if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
- char *current_val = current_ev + iwe_stream_lcp_len(info);
- int i;
- int step;
-
- if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
- step = 2;
- else
- step = 1;
-
- iwe.cmd = SIOCGIWRATE;
- /* Those two flags are ignored... */
- iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
- /* Max 10 values */
- for (i = 0; i < 10; i += step) {
- /* NULL terminated */
- if (bss->p.rates[i] == 0x0)
- break;
- /* Bit rate given in 500 kb/s units (+ 0x80) */
- iwe.u.bitrate.value =
- ((bss->p.rates[i] & 0x7f) * 500000);
- current_val = iwe_stream_add_value(info, current_ev,
- current_val,
- end_buf, &iwe,
- IW_EV_PARAM_LEN);
- }
- /* Check if we added any event */
- if ((current_val - current_ev) > iwe_stream_lcp_len(info))
- current_ev = current_val;
- }
-
- /* Beacon interval */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "bcn_int=%d",
- le16_to_cpu(bss->a.beacon_interv));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Capabilites */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "capab=0x%04x",
- capabilities);
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- " Last beacon: %dms ago",
- jiffies_to_msecs(jiffies - last_scanned));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- return current_ev;
-}
-
-static inline char *orinoco_translate_ext_scan(struct net_device *dev,
- struct iw_request_info *info,
- char *current_ev,
- char *end_buf,
- struct agere_ext_scan_info *bss,
- unsigned long last_scanned)
-{
- u16 capabilities;
- u16 channel;
- struct iw_event iwe; /* Temporary buffer */
- char custom[MAX_CUSTOM_LEN];
- u8 *ie;
-
- memset(&iwe, 0, sizeof(iwe));
-
- /* First entry *MUST* be the AP MAC address */
- iwe.cmd = SIOCGIWAP;
- iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_ADDR_LEN);
-
- /* Other entries will be displayed in the order we give them */
-
- /* Add the ESSID */
- ie = bss->data;
- iwe.u.data.length = ie[1];
- if (iwe.u.data.length) {
- if (iwe.u.data.length > 32)
- iwe.u.data.length = 32;
- iwe.cmd = SIOCGIWESSID;
- iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, &ie[2]);
- }
-
- /* Add mode */
- capabilities = le16_to_cpu(bss->capabilities);
- if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
- iwe.cmd = SIOCGIWMODE;
- if (capabilities & WLAN_CAPABILITY_ESS)
- iwe.u.mode = IW_MODE_MASTER;
- else
- iwe.u.mode = IW_MODE_ADHOC;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_UINT_LEN);
- }
-
- ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS);
- channel = ie ? ie[2] : 0;
- if ((channel >= 1) && (channel <= NUM_CHANNELS)) {
- /* Add channel and frequency */
- iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = channel;
- iwe.u.freq.e = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
-
- iwe.u.freq.m = ieee80211_dsss_chan_to_freq(channel) * 100000;
- iwe.u.freq.e = 1;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_FREQ_LEN);
- }
-
- /* Add quality statistics. level and noise in dB. No link quality */
- iwe.cmd = IWEVQUAL;
- iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID;
- iwe.u.qual.level = bss->level - 0x95;
- iwe.u.qual.noise = bss->noise - 0x95;
- /* Wireless tools prior to 27.pre22 will show link quality
- * anyway, so we provide a reasonable value. */
- if (iwe.u.qual.level > iwe.u.qual.noise)
- iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
- else
- iwe.u.qual.qual = 0;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf,
- &iwe, IW_EV_QUAL_LEN);
-
- /* Add encryption capability */
- iwe.cmd = SIOCGIWENCODE;
- if (capabilities & WLAN_CAPABILITY_PRIVACY)
- iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
- else
- iwe.u.data.flags = IW_ENCODE_DISABLED;
- iwe.u.data.length = 0;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, NULL);
-
- /* WPA IE */
- ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data));
- if (ie) {
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = ie[1] + 2;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, ie);
- }
-
- /* RSN IE */
- ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN);
- if (ie) {
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = ie[1] + 2;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, ie);
- }
-
- ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES);
- if (ie) {
- char *p = current_ev + iwe_stream_lcp_len(info);
- int i;
-
- iwe.cmd = SIOCGIWRATE;
- /* Those two flags are ignored... */
- iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-
- for (i = 2; i < (ie[1] + 2); i++) {
- iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000);
- p = iwe_stream_add_value(info, current_ev, p, end_buf,
- &iwe, IW_EV_PARAM_LEN);
- }
- /* Check if we added any event */
- if (p > (current_ev + iwe_stream_lcp_len(info)))
- current_ev = p;
- }
-
- /* Timestamp */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length =
- snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx",
- (unsigned long long) le64_to_cpu(bss->timestamp));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Beacon interval */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "bcn_int=%d",
- le16_to_cpu(bss->beacon_interval));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Capabilites */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- "capab=0x%04x",
- capabilities);
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- /* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN,
- " Last beacon: %dms ago",
- jiffies_to_msecs(jiffies - last_scanned));
- if (iwe.u.data.length)
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,
- &iwe, custom);
-
- return current_ev;
-}
-
-/* Return results of a scan */
-static int orinoco_ioctl_getscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *srq,
- char *extra)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
- unsigned long flags;
- char *current_ev = extra;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (priv->scan_inprogress) {
- /* Important note : we don't want to block the caller
- * until results are ready for various reasons.
- * First, managing wait queues is complex and racy.
- * Second, we grab some rtnetlink lock before comming
- * here (in dev_ioctl()).
- * Third, we generate an Wireless Event, so the
- * caller can wait itself on that - Jean II */
- err = -EAGAIN;
- goto out;
- }
-
- if (priv->has_ext_scan) {
- struct xbss_element *bss;
-
- list_for_each_entry(bss, &priv->bss_list, list) {
- /* Translate this entry to WE format */
- current_ev =
- orinoco_translate_ext_scan(dev, info,
- current_ev,
- extra + srq->length,
- &bss->bss,
- bss->last_scanned);
-
- /* Check if there is space for one more entry */
- if ((extra + srq->length - current_ev)
- <= IW_EV_ADDR_LEN) {
- /* Ask user space to try again with a
- * bigger buffer */
- err = -E2BIG;
- goto out;
- }
- }
-
- } else {
- struct bss_element *bss;
-
- list_for_each_entry(bss, &priv->bss_list, list) {
- /* Translate this entry to WE format */
- current_ev = orinoco_translate_scan(dev, info,
- current_ev,
- extra + srq->length,
- &bss->bss,
- bss->last_scanned);
-
- /* Check if there is space for one more entry */
- if ((extra + srq->length - current_ev)
- <= IW_EV_ADDR_LEN) {
- /* Ask user space to try again with a
- * bigger buffer */
- err = -E2BIG;
- goto out;
- }
- }
- }
-
- srq->length = (current_ev - extra);
- srq->flags = (__u16) priv->scan_mode;
-
-out:
- orinoco_unlock(priv, &flags);
- return err;
-}
/* Commit handler, called after set operations */
static int orinoco_ioctl_commit(struct net_device *dev,
@@ -2181,50 +1465,17 @@
void *wrqu,
char *extra)
{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
+ struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
int err = 0;
if (!priv->open)
return 0;
- if (priv->broken_disableport) {
- orinoco_reset(&priv->reset_work);
- return 0;
- }
-
if (orinoco_lock(priv, &flags) != 0)
return err;
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port "
- "while reconfiguring card\n", dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
+ err = orinoco_commit(priv);
orinoco_unlock(priv, &flags);
return err;
@@ -2258,26 +1509,24 @@
[IW_IOCTL_IDX(id)] = (iw_handler) func
static const iw_handler orinoco_handler[] = {
STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit),
- STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname),
+ STD_IW_HANDLER(SIOCGIWNAME, cfg80211_wext_giwname),
STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq),
STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq),
- STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode),
- STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode),
+ STD_IW_HANDLER(SIOCSIWMODE, cfg80211_wext_siwmode),
+ STD_IW_HANDLER(SIOCGIWMODE, cfg80211_wext_giwmode),
STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens),
STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens),
- STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange),
+ STD_IW_HANDLER(SIOCGIWRANGE, cfg80211_wext_giwrange),
STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap),
STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap),
- STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan),
- STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan),
+ STD_IW_HANDLER(SIOCSIWSCAN, cfg80211_wext_siwscan),
+ STD_IW_HANDLER(SIOCGIWSCAN, cfg80211_wext_giwscan),
STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid),
STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid),
- STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick),
- STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick),
STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate),
STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate),
STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts),
diff --git a/drivers/net/wireless/p54/Makefile b/drivers/net/wireless/p54/Makefile
index c2050dee..b542e68 100644
--- a/drivers/net/wireless/p54/Makefile
+++ b/drivers/net/wireless/p54/Makefile
@@ -1,3 +1,6 @@
+p54common-objs := eeprom.o fwio.o txrx.o main.o
+p54common-$(CONFIG_P54_LEDS) += led.o
+
obj-$(CONFIG_P54_COMMON) += p54common.o
obj-$(CONFIG_P54_USB) += p54usb.o
obj-$(CONFIG_P54_PCI) += p54pci.o
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
new file mode 100644
index 0000000..0efe67d
--- /dev/null
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -0,0 +1,753 @@
+/*
+ * EEPROM parser code for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ * - stlc45xx driver
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/sort.h>
+
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "eeprom.h"
+#include "lmac.h"
+
+static struct ieee80211_rate p54_bgrates[] = {
+ { .bitrate = 10, .hw_value = 0, },
+ { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60, .hw_value = 4, },
+ { .bitrate = 90, .hw_value = 5, },
+ { .bitrate = 120, .hw_value = 6, },
+ { .bitrate = 180, .hw_value = 7, },
+ { .bitrate = 240, .hw_value = 8, },
+ { .bitrate = 360, .hw_value = 9, },
+ { .bitrate = 480, .hw_value = 10, },
+ { .bitrate = 540, .hw_value = 11, },
+};
+
+static struct ieee80211_rate p54_arates[] = {
+ { .bitrate = 60, .hw_value = 4, },
+ { .bitrate = 90, .hw_value = 5, },
+ { .bitrate = 120, .hw_value = 6, },
+ { .bitrate = 180, .hw_value = 7, },
+ { .bitrate = 240, .hw_value = 8, },
+ { .bitrate = 360, .hw_value = 9, },
+ { .bitrate = 480, .hw_value = 10, },
+ { .bitrate = 540, .hw_value = 11, },
+};
+
+#define CHAN_HAS_CAL BIT(0)
+#define CHAN_HAS_LIMIT BIT(1)
+#define CHAN_HAS_CURVE BIT(2)
+#define CHAN_HAS_ALL (CHAN_HAS_CAL | CHAN_HAS_LIMIT | CHAN_HAS_CURVE)
+
+struct p54_channel_entry {
+ u16 freq;
+ u16 data;
+ int index;
+ enum ieee80211_band band;
+};
+
+struct p54_channel_list {
+ struct p54_channel_entry *channels;
+ size_t entries;
+ size_t max_entries;
+ size_t band_channel_num[IEEE80211_NUM_BANDS];
+};
+
+static int p54_get_band_from_freq(u16 freq)
+{
+ /* FIXME: sync these values with the 802.11 spec */
+
+ if ((freq >= 2412) && (freq <= 2484))
+ return IEEE80211_BAND_2GHZ;
+
+ if ((freq >= 4920) && (freq <= 5825))
+ return IEEE80211_BAND_5GHZ;
+
+ return -1;
+}
+
+static int p54_compare_channels(const void *_a,
+ const void *_b)
+{
+ const struct p54_channel_entry *a = _a;
+ const struct p54_channel_entry *b = _b;
+
+ return a->index - b->index;
+}
+
+static int p54_fill_band_bitrates(struct ieee80211_hw *dev,
+ struct ieee80211_supported_band *band_entry,
+ enum ieee80211_band band)
+{
+ /* TODO: generate rate array dynamically */
+
+ switch (band) {
+ case IEEE80211_BAND_2GHZ:
+ band_entry->bitrates = p54_bgrates;
+ band_entry->n_bitrates = ARRAY_SIZE(p54_bgrates);
+ break;
+ case IEEE80211_BAND_5GHZ:
+ band_entry->bitrates = p54_arates;
+ band_entry->n_bitrates = ARRAY_SIZE(p54_arates);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int p54_generate_band(struct ieee80211_hw *dev,
+ struct p54_channel_list *list,
+ enum ieee80211_band band)
+{
+ struct p54_common *priv = dev->priv;
+ struct ieee80211_supported_band *tmp, *old;
+ unsigned int i, j;
+ int ret = -ENOMEM;
+
+ if ((!list->entries) || (!list->band_channel_num[band]))
+ return 0;
+
+ tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
+ goto err_out;
+
+ tmp->channels = kzalloc(sizeof(struct ieee80211_channel) *
+ list->band_channel_num[band], GFP_KERNEL);
+ if (!tmp->channels)
+ goto err_out;
+
+ ret = p54_fill_band_bitrates(dev, tmp, band);
+ if (ret)
+ goto err_out;
+
+ for (i = 0, j = 0; (j < list->band_channel_num[band]) &&
+ (i < list->entries); i++) {
+
+ if (list->channels[i].band != band)
+ continue;
+
+ if (list->channels[i].data != CHAN_HAS_ALL) {
+ printk(KERN_ERR "%s:%s%s%s is/are missing for "
+ "channel:%d [%d MHz].\n",
+ wiphy_name(dev->wiphy),
+ (list->channels[i].data & CHAN_HAS_CAL ? "" :
+ " [iqauto calibration data]"),
+ (list->channels[i].data & CHAN_HAS_LIMIT ? "" :
+ " [output power limits]"),
+ (list->channels[i].data & CHAN_HAS_CURVE ? "" :
+ " [curve data]"),
+ list->channels[i].index, list->channels[i].freq);
+ }
+
+ tmp->channels[j].band = list->channels[i].band;
+ tmp->channels[j].center_freq = list->channels[i].freq;
+ j++;
+ }
+
+ tmp->n_channels = list->band_channel_num[band];
+ old = priv->band_table[band];
+ priv->band_table[band] = tmp;
+ if (old) {
+ kfree(old->channels);
+ kfree(old);
+ }
+
+ return 0;
+
+err_out:
+ if (tmp) {
+ kfree(tmp->channels);
+ kfree(tmp);
+ }
+
+ return ret;
+}
+
+static void p54_update_channel_param(struct p54_channel_list *list,
+ u16 freq, u16 data)
+{
+ int band, i;
+
+ /*
+ * usually all lists in the eeprom are mostly sorted.
+ * so it's very likely that the entry we are looking for
+ * is right at the end of the list
+ */
+ for (i = list->entries; i >= 0; i--) {
+ if (freq == list->channels[i].freq) {
+ list->channels[i].data |= data;
+ break;
+ }
+ }
+
+ if ((i < 0) && (list->entries < list->max_entries)) {
+ /* entry does not exist yet. Initialize a new one. */
+ band = p54_get_band_from_freq(freq);
+
+ /*
+ * filter out frequencies which don't belong into
+ * any supported band.
+ */
+ if (band < 0)
+ return ;
+
+ i = list->entries++;
+ list->band_channel_num[band]++;
+
+ list->channels[i].freq = freq;
+ list->channels[i].data = data;
+ list->channels[i].band = band;
+ list->channels[i].index = ieee80211_frequency_to_channel(freq);
+ /* TODO: parse output_limit and fill max_power */
+ }
+}
+
+static int p54_generate_channel_lists(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_channel_list *list;
+ unsigned int i, j, max_channel_num;
+ int ret = -ENOMEM;
+ u16 freq;
+
+ if ((priv->iq_autocal_len != priv->curve_data->entries) ||
+ (priv->iq_autocal_len != priv->output_limit->entries))
+ printk(KERN_ERR "%s: EEPROM is damaged... you may not be able"
+ "to use all channels with this device.\n",
+ wiphy_name(dev->wiphy));
+
+ max_channel_num = max_t(unsigned int, priv->output_limit->entries,
+ priv->iq_autocal_len);
+ max_channel_num = max_t(unsigned int, max_channel_num,
+ priv->curve_data->entries);
+
+ list = kzalloc(sizeof(*list), GFP_KERNEL);
+ if (!list)
+ goto free;
+
+ list->max_entries = max_channel_num;
+ list->channels = kzalloc(sizeof(struct p54_channel_entry) *
+ max_channel_num, GFP_KERNEL);
+ if (!list->channels)
+ goto free;
+
+ for (i = 0; i < max_channel_num; i++) {
+ if (i < priv->iq_autocal_len) {
+ freq = le16_to_cpu(priv->iq_autocal[i].freq);
+ p54_update_channel_param(list, freq, CHAN_HAS_CAL);
+ }
+
+ if (i < priv->output_limit->entries) {
+ freq = le16_to_cpup((__le16 *) (i *
+ priv->output_limit->entry_size +
+ priv->output_limit->offset +
+ priv->output_limit->data));
+
+ p54_update_channel_param(list, freq, CHAN_HAS_LIMIT);
+ }
+
+ if (i < priv->curve_data->entries) {
+ freq = le16_to_cpup((__le16 *) (i *
+ priv->curve_data->entry_size +
+ priv->curve_data->offset +
+ priv->curve_data->data));
+
+ p54_update_channel_param(list, freq, CHAN_HAS_CURVE);
+ }
+ }
+
+ /* sort the list by the channel index */
+ sort(list->channels, list->entries, sizeof(struct p54_channel_entry),
+ p54_compare_channels, NULL);
+
+ for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) {
+ if (list->band_channel_num[i]) {
+ ret = p54_generate_band(dev, list, i);
+ if (ret)
+ goto free;
+
+ j++;
+ }
+ }
+ if (j == 0) {
+ /* no useable band available. */
+ ret = -EINVAL;
+ }
+
+free:
+ if (list) {
+ kfree(list->channels);
+ kfree(list);
+ }
+
+ return ret;
+}
+
+static int p54_convert_rev0(struct ieee80211_hw *dev,
+ struct pda_pa_curve_data *curve_data)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_pa_curve_data_sample *dst;
+ struct pda_pa_curve_data_sample_rev0 *src;
+ size_t cd_len = sizeof(*curve_data) +
+ (curve_data->points_per_channel*sizeof(*dst) + 2) *
+ curve_data->channels;
+ unsigned int i, j;
+ void *source, *target;
+
+ priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len,
+ GFP_KERNEL);
+ if (!priv->curve_data)
+ return -ENOMEM;
+
+ priv->curve_data->entries = curve_data->channels;
+ priv->curve_data->entry_size = sizeof(__le16) +
+ sizeof(*dst) * curve_data->points_per_channel;
+ priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
+ priv->curve_data->len = cd_len;
+ memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
+ source = curve_data->data;
+ target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
+ for (i = 0; i < curve_data->channels; i++) {
+ __le16 *freq = source;
+ source += sizeof(__le16);
+ *((__le16 *)target) = *freq;
+ target += sizeof(__le16);
+ for (j = 0; j < curve_data->points_per_channel; j++) {
+ dst = target;
+ src = source;
+
+ dst->rf_power = src->rf_power;
+ dst->pa_detector = src->pa_detector;
+ dst->data_64qam = src->pcv;
+ /* "invent" the points for the other modulations */
+#define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y))
+ dst->data_16qam = SUB(src->pcv, 12);
+ dst->data_qpsk = SUB(dst->data_16qam, 12);
+ dst->data_bpsk = SUB(dst->data_qpsk, 12);
+ dst->data_barker = SUB(dst->data_bpsk, 14);
+#undef SUB
+ target += sizeof(*dst);
+ source += sizeof(*src);
+ }
+ }
+
+ return 0;
+}
+
+static int p54_convert_rev1(struct ieee80211_hw *dev,
+ struct pda_pa_curve_data *curve_data)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_pa_curve_data_sample *dst;
+ struct pda_pa_curve_data_sample_rev1 *src;
+ size_t cd_len = sizeof(*curve_data) +
+ (curve_data->points_per_channel*sizeof(*dst) + 2) *
+ curve_data->channels;
+ unsigned int i, j;
+ void *source, *target;
+
+ priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data),
+ GFP_KERNEL);
+ if (!priv->curve_data)
+ return -ENOMEM;
+
+ priv->curve_data->entries = curve_data->channels;
+ priv->curve_data->entry_size = sizeof(__le16) +
+ sizeof(*dst) * curve_data->points_per_channel;
+ priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
+ priv->curve_data->len = cd_len;
+ memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
+ source = curve_data->data;
+ target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
+ for (i = 0; i < curve_data->channels; i++) {
+ __le16 *freq = source;
+ source += sizeof(__le16);
+ *((__le16 *)target) = *freq;
+ target += sizeof(__le16);
+ for (j = 0; j < curve_data->points_per_channel; j++) {
+ memcpy(target, source, sizeof(*src));
+
+ target += sizeof(*dst);
+ source += sizeof(*src);
+ }
+ source++;
+ }
+
+ return 0;
+}
+
+static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2",
+ "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" };
+
+static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len,
+ u16 type)
+{
+ struct p54_common *priv = dev->priv;
+ int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0;
+ int entry_size = sizeof(struct pda_rssi_cal_entry) + offset;
+ int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
+ int i;
+
+ if (len != (entry_size * num_entries)) {
+ printk(KERN_ERR "%s: unknown rssi calibration data packing "
+ " type:(%x) len:%d.\n",
+ wiphy_name(dev->wiphy), type, len);
+
+ print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
+ data, len);
+
+ printk(KERN_ERR "%s: please report this issue.\n",
+ wiphy_name(dev->wiphy));
+ return;
+ }
+
+ for (i = 0; i < num_entries; i++) {
+ struct pda_rssi_cal_entry *cal = data +
+ (offset + i * entry_size);
+ priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul);
+ priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add);
+ }
+}
+
+static void p54_parse_default_country(struct ieee80211_hw *dev,
+ void *data, int len)
+{
+ struct pda_country *country;
+
+ if (len != sizeof(*country)) {
+ printk(KERN_ERR "%s: found possible invalid default country "
+ "eeprom entry. (entry size: %d)\n",
+ wiphy_name(dev->wiphy), len);
+
+ print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
+ data, len);
+
+ printk(KERN_ERR "%s: please report this issue.\n",
+ wiphy_name(dev->wiphy));
+ return;
+ }
+
+ country = (struct pda_country *) data;
+ if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO)
+ regulatory_hint(dev->wiphy, country->alpha2);
+ else {
+ /* TODO:
+ * write a shared/common function that converts
+ * "Regulatory domain codes" (802.11-2007 14.8.2.2)
+ * into ISO/IEC 3166-1 alpha2 for regulatory_hint.
+ */
+ }
+}
+
+static int p54_convert_output_limits(struct ieee80211_hw *dev,
+ u8 *data, size_t len)
+{
+ struct p54_common *priv = dev->priv;
+
+ if (len < 2)
+ return -EINVAL;
+
+ if (data[0] != 0) {
+ printk(KERN_ERR "%s: unknown output power db revision:%x\n",
+ wiphy_name(dev->wiphy), data[0]);
+ return -EINVAL;
+ }
+
+ if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len)
+ return -EINVAL;
+
+ priv->output_limit = kmalloc(data[1] *
+ sizeof(struct pda_channel_output_limit) +
+ sizeof(*priv->output_limit), GFP_KERNEL);
+
+ if (!priv->output_limit)
+ return -ENOMEM;
+
+ priv->output_limit->offset = 0;
+ priv->output_limit->entries = data[1];
+ priv->output_limit->entry_size =
+ sizeof(struct pda_channel_output_limit);
+ priv->output_limit->len = priv->output_limit->entry_size *
+ priv->output_limit->entries +
+ priv->output_limit->offset;
+
+ memcpy(priv->output_limit->data, &data[2],
+ data[1] * sizeof(struct pda_channel_output_limit));
+
+ return 0;
+}
+
+static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src,
+ size_t total_len)
+{
+ struct p54_cal_database *dst;
+ size_t payload_len, entries, entry_size, offset;
+
+ payload_len = le16_to_cpu(src->len);
+ entries = le16_to_cpu(src->entries);
+ entry_size = le16_to_cpu(src->entry_size);
+ offset = le16_to_cpu(src->offset);
+ if (((entries * entry_size + offset) != payload_len) ||
+ (payload_len + sizeof(*src) != total_len))
+ return NULL;
+
+ dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+
+ dst->entries = entries;
+ dst->entry_size = entry_size;
+ dst->offset = offset;
+ dst->len = payload_len;
+
+ memcpy(dst->data, src->data, payload_len);
+ return dst;
+}
+
+int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
+{
+ struct p54_common *priv = dev->priv;
+ struct eeprom_pda_wrap *wrap;
+ struct pda_entry *entry;
+ unsigned int data_len, entry_len;
+ void *tmp;
+ int err;
+ u8 *end = (u8 *)eeprom + len;
+ u16 synth = 0;
+
+ wrap = (struct eeprom_pda_wrap *) eeprom;
+ entry = (void *)wrap->data + le16_to_cpu(wrap->len);
+
+ /* verify that at least the entry length/code fits */
+ while ((u8 *)entry <= end - sizeof(*entry)) {
+ entry_len = le16_to_cpu(entry->len);
+ data_len = ((entry_len - 1) << 1);
+
+ /* abort if entry exceeds whole structure */
+ if ((u8 *)entry + sizeof(*entry) + data_len > end)
+ break;
+
+ switch (le16_to_cpu(entry->code)) {
+ case PDR_MAC_ADDRESS:
+ if (data_len != ETH_ALEN)
+ break;
+ SET_IEEE80211_PERM_ADDR(dev, entry->data);
+ break;
+ case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS:
+ if (priv->output_limit)
+ break;
+ err = p54_convert_output_limits(dev, entry->data,
+ data_len);
+ if (err)
+ goto err;
+ break;
+ case PDR_PRISM_PA_CAL_CURVE_DATA: {
+ struct pda_pa_curve_data *curve_data =
+ (struct pda_pa_curve_data *)entry->data;
+ if (data_len < sizeof(*curve_data)) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ switch (curve_data->cal_method_rev) {
+ case 0:
+ err = p54_convert_rev0(dev, curve_data);
+ break;
+ case 1:
+ err = p54_convert_rev1(dev, curve_data);
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown curve data "
+ "revision %d\n",
+ wiphy_name(dev->wiphy),
+ curve_data->cal_method_rev);
+ err = -ENODEV;
+ break;
+ }
+ if (err)
+ goto err;
+ }
+ break;
+ case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
+ priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
+ if (!priv->iq_autocal) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ memcpy(priv->iq_autocal, entry->data, data_len);
+ priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
+ break;
+ case PDR_DEFAULT_COUNTRY:
+ p54_parse_default_country(dev, entry->data, data_len);
+ break;
+ case PDR_INTERFACE_LIST:
+ tmp = entry->data;
+ while ((u8 *)tmp < entry->data + data_len) {
+ struct exp_if *exp_if = tmp;
+ if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000))
+ synth = le16_to_cpu(exp_if->variant);
+ tmp += sizeof(*exp_if);
+ }
+ break;
+ case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
+ if (data_len < 2)
+ break;
+ priv->version = *(u8 *)(entry->data + 1);
+ break;
+ case PDR_RSSI_LINEAR_APPROXIMATION:
+ case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
+ case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
+ p54_parse_rssical(dev, entry->data, data_len,
+ le16_to_cpu(entry->code));
+ break;
+ case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: {
+ __le16 *src = (void *) entry->data;
+ s16 *dst = (void *) &priv->rssical_db;
+ int i;
+
+ if (data_len != sizeof(priv->rssical_db)) {
+ err = -EINVAL;
+ goto err;
+ }
+ for (i = 0; i < sizeof(priv->rssical_db) /
+ sizeof(*src); i++)
+ *(dst++) = (s16) le16_to_cpu(*(src++));
+ }
+ break;
+ case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
+ struct pda_custom_wrapper *pda = (void *) entry->data;
+ if (priv->output_limit || data_len < sizeof(*pda))
+ break;
+ priv->output_limit = p54_convert_db(pda, data_len);
+ }
+ break;
+ case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: {
+ struct pda_custom_wrapper *pda = (void *) entry->data;
+ if (priv->curve_data || data_len < sizeof(*pda))
+ break;
+ priv->curve_data = p54_convert_db(pda, data_len);
+ }
+ break;
+ case PDR_END:
+ /* make it overrun */
+ entry_len = len;
+ break;
+ default:
+ break;
+ }
+
+ entry = (void *)entry + (entry_len + 1)*2;
+ }
+
+ if (!synth || !priv->iq_autocal || !priv->output_limit ||
+ !priv->curve_data) {
+ printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
+ wiphy_name(dev->wiphy));
+ err = -EINVAL;
+ goto err;
+ }
+
+ err = p54_generate_channel_lists(dev);
+ if (err)
+ goto err;
+
+ priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
+ if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW)
+ p54_init_xbow_synth(priv);
+ if (!(synth & PDR_SYNTH_24_GHZ_DISABLED))
+ dev->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ priv->band_table[IEEE80211_BAND_2GHZ];
+ if (!(synth & PDR_SYNTH_5_GHZ_DISABLED))
+ dev->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ priv->band_table[IEEE80211_BAND_5GHZ];
+ if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED)
+ priv->rx_diversity_mask = 3;
+ if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED)
+ priv->tx_diversity_mask = 3;
+
+ if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+ u8 perm_addr[ETH_ALEN];
+
+ printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
+ wiphy_name(dev->wiphy));
+ random_ether_addr(perm_addr);
+ SET_IEEE80211_PERM_ADDR(dev, perm_addr);
+ }
+
+ printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
+ wiphy_name(dev->wiphy), dev->wiphy->perm_addr, priv->version,
+ p54_rf_chips[priv->rxhw]);
+
+ return 0;
+
+err:
+ kfree(priv->iq_autocal);
+ kfree(priv->output_limit);
+ kfree(priv->curve_data);
+ priv->iq_autocal = NULL;
+ priv->output_limit = NULL;
+ priv->curve_data = NULL;
+
+ printk(KERN_ERR "%s: eeprom parse failed!\n",
+ wiphy_name(dev->wiphy));
+ return err;
+}
+EXPORT_SYMBOL_GPL(p54_parse_eeprom);
+
+int p54_read_eeprom(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize;
+ int ret = -ENOMEM;
+ void *eeprom;
+
+ maxblocksize = EEPROM_READBACK_LEN;
+ if (priv->fw_var >= 0x509)
+ maxblocksize -= 0xc;
+ else
+ maxblocksize -= 0x4;
+
+ eeprom = kzalloc(eeprom_size, GFP_KERNEL);
+ if (unlikely(!eeprom))
+ goto free;
+
+ while (eeprom_size) {
+ blocksize = min(eeprom_size, maxblocksize);
+ ret = p54_download_eeprom(priv, (void *) (eeprom + offset),
+ offset, blocksize);
+ if (unlikely(ret))
+ goto free;
+
+ offset += blocksize;
+ eeprom_size -= blocksize;
+ }
+
+ ret = p54_parse_eeprom(dev, eeprom, offset);
+free:
+ kfree(eeprom);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(p54_read_eeprom);
diff --git a/drivers/net/wireless/p54/eeprom.h b/drivers/net/wireless/p54/eeprom.h
new file mode 100644
index 0000000..9051aef
--- /dev/null
+++ b/drivers/net/wireless/p54/eeprom.h
@@ -0,0 +1,226 @@
+/*
+ * eeprom specific definitions for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * - LMAC API interface header file for STLC4560 (lmac_longbow.h)
+ * Copyright (C) 2007 Conexant Systems, Inc.
+ *
+ * - islmvc driver
+ * Copyright (C) 2001 Intersil Americas Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef EEPROM_H
+#define EEPROM_H
+
+/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
+
+struct pda_entry {
+ __le16 len; /* includes both code and data */
+ __le16 code;
+ u8 data[0];
+} __packed;
+
+struct eeprom_pda_wrap {
+ __le32 magic;
+ __le16 pad;
+ __le16 len;
+ __le32 arm_opcode;
+ u8 data[0];
+} __packed;
+
+struct p54_iq_autocal_entry {
+ __le16 iq_param[4];
+} __packed;
+
+struct pda_iq_autocal_entry {
+ __le16 freq;
+ struct p54_iq_autocal_entry params;
+} __packed;
+
+struct pda_channel_output_limit {
+ __le16 freq;
+ u8 val_bpsk;
+ u8 val_qpsk;
+ u8 val_16qam;
+ u8 val_64qam;
+ u8 rate_set_mask;
+ u8 rate_set_size;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev0 {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 pcv;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev1 {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 data_barker;
+ u8 data_bpsk;
+ u8 data_qpsk;
+ u8 data_16qam;
+ u8 data_64qam;
+} __packed;
+
+struct pda_pa_curve_data {
+ u8 cal_method_rev;
+ u8 channels;
+ u8 points_per_channel;
+ u8 padding;
+ u8 data[0];
+} __packed;
+
+struct pda_rssi_cal_entry {
+ __le16 mul;
+ __le16 add;
+} __packed;
+
+struct pda_country {
+ u8 regdomain;
+ u8 alpha2[2];
+ u8 flags;
+} __packed;
+
+struct pda_antenna_gain {
+ struct {
+ u8 gain_5GHz; /* 0.25 dBi units */
+ u8 gain_2GHz; /* 0.25 dBi units */
+ } __packed antenna[0];
+} __packed;
+
+struct pda_custom_wrapper {
+ __le16 entries;
+ __le16 entry_size;
+ __le16 offset;
+ __le16 len;
+ u8 data[0];
+} __packed;
+
+/*
+ * this defines the PDR codes used to build PDAs as defined in document
+ * number 553155. The current implementation mirrors version 1.1 of the
+ * document and lists only PDRs supported by the ARM platform.
+ */
+
+/* common and choice range (0x0000 - 0x0fff) */
+#define PDR_END 0x0000
+#define PDR_MANUFACTURING_PART_NUMBER 0x0001
+#define PDR_PDA_VERSION 0x0002
+#define PDR_NIC_SERIAL_NUMBER 0x0003
+#define PDR_NIC_RAM_SIZE 0x0005
+#define PDR_RFMODEM_SUP_RANGE 0x0006
+#define PDR_PRISM_MAC_SUP_RANGE 0x0007
+#define PDR_NIC_ID 0x0008
+
+#define PDR_MAC_ADDRESS 0x0101
+#define PDR_REGULATORY_DOMAIN_LIST 0x0103 /* obsolete */
+#define PDR_ALLOWED_CHAN_SET 0x0104
+#define PDR_DEFAULT_CHAN 0x0105
+#define PDR_TEMPERATURE_TYPE 0x0107
+
+#define PDR_IFR_SETTING 0x0200
+#define PDR_RFR_SETTING 0x0201
+#define PDR_3861_BASELINE_REG_SETTINGS 0x0202
+#define PDR_3861_SHADOW_REG_SETTINGS 0x0203
+#define PDR_3861_IFRF_REG_SETTINGS 0x0204
+
+#define PDR_3861_CHAN_CALIB_SET_POINTS 0x0300
+#define PDR_3861_CHAN_CALIB_INTEGRATOR 0x0301
+
+#define PDR_3842_PRISM_II_NIC_CONFIG 0x0400
+#define PDR_PRISM_USB_ID 0x0401
+#define PDR_PRISM_PCI_ID 0x0402
+#define PDR_PRISM_PCI_IF_CONFIG 0x0403
+#define PDR_PRISM_PCI_PM_CONFIG 0x0404
+
+#define PDR_3861_MF_TEST_CHAN_SET_POINTS 0x0900
+#define PDR_3861_MF_TEST_CHAN_INTEGRATORS 0x0901
+
+/* ARM range (0x1000 - 0x1fff) */
+#define PDR_COUNTRY_INFORMATION 0x1000 /* obsolete */
+#define PDR_INTERFACE_LIST 0x1001
+#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002
+#define PDR_OEM_NAME 0x1003
+#define PDR_PRODUCT_NAME 0x1004
+#define PDR_UTF8_OEM_NAME 0x1005
+#define PDR_UTF8_PRODUCT_NAME 0x1006
+#define PDR_COUNTRY_LIST 0x1007
+#define PDR_DEFAULT_COUNTRY 0x1008
+
+#define PDR_ANTENNA_GAIN 0x1100
+
+#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901
+#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903
+#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904
+#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905
+#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906
+#define PDR_REGULATORY_POWER_LIMITS 0x1907
+#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908
+#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909
+#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a
+
+/* reserved range (0x2000 - 0x7fff) */
+
+/* customer range (0x8000 - 0xffff) */
+#define PDR_BASEBAND_REGISTERS 0x8000
+#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001
+
+/* used by our modificated eeprom image */
+#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF
+#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D
+
+/* Interface Definitions */
+#define PDR_INTERFACE_ROLE_SERVER 0x0000
+#define PDR_INTERFACE_ROLE_CLIENT 0x0001
+
+/* PDR definitions for default country & country list */
+#define PDR_COUNTRY_CERT_CODE 0x80
+#define PDR_COUNTRY_CERT_CODE_REAL 0x00
+#define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80
+#define PDR_COUNTRY_CERT_BAND 0x40
+#define PDR_COUNTRY_CERT_BAND_2GHZ 0x00
+#define PDR_COUNTRY_CERT_BAND_5GHZ 0x40
+#define PDR_COUNTRY_CERT_IODOOR 0x30
+#define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00
+#define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20
+#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30
+#define PDR_COUNTRY_CERT_INDEX 0x0f
+
+/* Specific LMAC FW/HW variant definitions */
+#define PDR_SYNTH_FRONTEND_MASK 0x0007
+#define PDR_SYNTH_FRONTEND_DUETTE3 0x0001
+#define PDR_SYNTH_FRONTEND_DUETTE2 0x0002
+#define PDR_SYNTH_FRONTEND_FRISBEE 0x0003
+#define PDR_SYNTH_FRONTEND_XBOW 0x0004
+#define PDR_SYNTH_FRONTEND_LONGBOW 0x0005
+#define PDR_SYNTH_IQ_CAL_MASK 0x0018
+#define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000
+#define PDR_SYNTH_IQ_CAL_DISABLED 0x0008
+#define PDR_SYNTH_IQ_CAL_ZIF 0x0010
+#define PDR_SYNTH_FAA_SWITCH_MASK 0x0020
+#define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020
+#define PDR_SYNTH_24_GHZ_MASK 0x0040
+#define PDR_SYNTH_24_GHZ_DISABLED 0x0040
+#define PDR_SYNTH_5_GHZ_MASK 0x0080
+#define PDR_SYNTH_5_GHZ_DISABLED 0x0080
+#define PDR_SYNTH_RX_DIV_MASK 0x0100
+#define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100
+#define PDR_SYNTH_TX_DIV_MASK 0x0200
+#define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200
+#define PDR_SYNTH_ASM_MASK 0x0400
+#define PDR_SYNTH_ASM_XSWON 0x0400
+
+#endif /* EEPROM_H */
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
new file mode 100644
index 0000000..e7b9e9c
--- /dev/null
+++ b/drivers/net/wireless/p54/fwio.c
@@ -0,0 +1,716 @@
+/*
+ * Firmware I/O code for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ * - stlc45xx driver
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "eeprom.h"
+#include "lmac.h"
+
+int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
+{
+ struct p54_common *priv = dev->priv;
+ struct exp_if *exp_if;
+ struct bootrec *bootrec;
+ u32 *data = (u32 *)fw->data;
+ u32 *end_data = (u32 *)fw->data + (fw->size >> 2);
+ u8 *fw_version = NULL;
+ size_t len;
+ int i;
+ int maxlen;
+
+ if (priv->rx_start)
+ return 0;
+
+ while (data < end_data && *data)
+ data++;
+
+ while (data < end_data && !*data)
+ data++;
+
+ bootrec = (struct bootrec *) data;
+
+ while (bootrec->data <= end_data && (bootrec->data +
+ (len = le32_to_cpu(bootrec->len))) <= end_data) {
+ u32 code = le32_to_cpu(bootrec->code);
+ switch (code) {
+ case BR_CODE_COMPONENT_ID:
+ priv->fw_interface = be32_to_cpup((__be32 *)
+ bootrec->data);
+ switch (priv->fw_interface) {
+ case FW_LM86:
+ case FW_LM20:
+ case FW_LM87: {
+ char *iftype = (char *)bootrec->data;
+ printk(KERN_INFO "%s: p54 detected a LM%c%c "
+ "firmware\n",
+ wiphy_name(priv->hw->wiphy),
+ iftype[2], iftype[3]);
+ break;
+ }
+ case FW_FMAC:
+ default:
+ printk(KERN_ERR "%s: unsupported firmware\n",
+ wiphy_name(priv->hw->wiphy));
+ return -ENODEV;
+ }
+ break;
+ case BR_CODE_COMPONENT_VERSION:
+ /* 24 bytes should be enough for all firmwares */
+ if (strnlen((unsigned char *) bootrec->data, 24) < 24)
+ fw_version = (unsigned char *) bootrec->data;
+ break;
+ case BR_CODE_DESCR: {
+ struct bootrec_desc *desc =
+ (struct bootrec_desc *)bootrec->data;
+ priv->rx_start = le32_to_cpu(desc->rx_start);
+ /* FIXME add sanity checking */
+ priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500;
+ priv->headroom = desc->headroom;
+ priv->tailroom = desc->tailroom;
+ priv->privacy_caps = desc->privacy_caps;
+ priv->rx_keycache_size = desc->rx_keycache_size;
+ if (le32_to_cpu(bootrec->len) == 11)
+ priv->rx_mtu = le16_to_cpu(desc->rx_mtu);
+ else
+ priv->rx_mtu = (size_t)
+ 0x620 - priv->tx_hdr_len;
+ maxlen = priv->tx_hdr_len + /* USB devices */
+ sizeof(struct p54_rx_data) +
+ 4 + /* rx alignment */
+ IEEE80211_MAX_FRAG_THRESHOLD;
+ if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) {
+ printk(KERN_INFO "p54: rx_mtu reduced from %d "
+ "to %d\n", priv->rx_mtu, maxlen);
+ priv->rx_mtu = maxlen;
+ }
+ break;
+ }
+ case BR_CODE_EXPOSED_IF:
+ exp_if = (struct exp_if *) bootrec->data;
+ for (i = 0; i < (len * sizeof(*exp_if) / 4); i++)
+ if (exp_if[i].if_id == cpu_to_le16(IF_ID_LMAC))
+ priv->fw_var = le16_to_cpu(exp_if[i].variant);
+ break;
+ case BR_CODE_DEPENDENT_IF:
+ break;
+ case BR_CODE_END_OF_BRA:
+ case LEGACY_BR_CODE_END_OF_BRA:
+ end_data = NULL;
+ break;
+ default:
+ break;
+ }
+ bootrec = (struct bootrec *)&bootrec->data[len];
+ }
+
+ if (fw_version)
+ printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
+ wiphy_name(priv->hw->wiphy), fw_version,
+ priv->fw_var >> 8, priv->fw_var & 0xff);
+
+ if (priv->fw_var < 0x500)
+ printk(KERN_INFO "%s: you are using an obsolete firmware. "
+ "visit http://wireless.kernel.org/en/users/Drivers/p54 "
+ "and grab one for \"kernel >= 2.6.28\"!\n",
+ wiphy_name(priv->hw->wiphy));
+
+ if (priv->fw_var >= 0x300) {
+ /* Firmware supports QoS, use it! */
+
+ if (priv->fw_var >= 0x500) {
+ priv->tx_stats[P54_QUEUE_AC_VO].limit = 16;
+ priv->tx_stats[P54_QUEUE_AC_VI].limit = 16;
+ priv->tx_stats[P54_QUEUE_AC_BE].limit = 16;
+ priv->tx_stats[P54_QUEUE_AC_BK].limit = 16;
+ } else {
+ priv->tx_stats[P54_QUEUE_AC_VO].limit = 3;
+ priv->tx_stats[P54_QUEUE_AC_VI].limit = 4;
+ priv->tx_stats[P54_QUEUE_AC_BE].limit = 3;
+ priv->tx_stats[P54_QUEUE_AC_BK].limit = 2;
+ }
+ priv->hw->queues = P54_QUEUE_AC_NUM;
+ }
+
+ printk(KERN_INFO "%s: cryptographic accelerator "
+ "WEP:%s, TKIP:%s, CCMP:%s\n", wiphy_name(priv->hw->wiphy),
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" :
+ "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP |
+ BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no",
+ (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
+ "YES" : "no");
+
+ if (priv->rx_keycache_size) {
+ /*
+ * NOTE:
+ *
+ * The firmware provides at most 255 (0 - 254) slots
+ * for keys which are then used to offload decryption.
+ * As a result the 255 entry (aka 0xff) can be used
+ * safely by the driver to mark keys that didn't fit
+ * into the full cache. This trick saves us from
+ * keeping a extra list for uploaded keys.
+ */
+
+ priv->used_rxkeys = kzalloc(BITS_TO_LONGS(
+ priv->rx_keycache_size), GFP_KERNEL);
+
+ if (!priv->used_rxkeys)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(p54_parse_firmware);
+
+static struct sk_buff *p54_alloc_skb(struct p54_common *priv, u16 hdr_flags,
+ u16 payload_len, u16 type, gfp_t memflags)
+{
+ struct p54_hdr *hdr;
+ struct sk_buff *skb;
+ size_t frame_len = sizeof(*hdr) + payload_len;
+
+ if (frame_len > P54_MAX_CTRL_FRAME_LEN)
+ return NULL;
+
+ if (unlikely(skb_queue_len(&priv->tx_pending) > 64))
+ return NULL;
+
+ skb = __dev_alloc_skb(priv->tx_hdr_len + frame_len, memflags);
+ if (!skb)
+ return NULL;
+ skb_reserve(skb, priv->tx_hdr_len);
+
+ hdr = (struct p54_hdr *) skb_put(skb, sizeof(*hdr));
+ hdr->flags = cpu_to_le16(hdr_flags);
+ hdr->len = cpu_to_le16(payload_len);
+ hdr->type = cpu_to_le16(type);
+ hdr->tries = hdr->rts_tries = 0;
+ return skb;
+}
+
+int p54_download_eeprom(struct p54_common *priv, void *buf,
+ u16 offset, u16 len)
+{
+ struct p54_eeprom_lm86 *eeprom_hdr;
+ struct sk_buff *skb;
+ size_t eeprom_hdr_size;
+ int ret = 0;
+
+ if (priv->fw_var >= 0x509)
+ eeprom_hdr_size = sizeof(*eeprom_hdr);
+ else
+ eeprom_hdr_size = 0x4;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL, eeprom_hdr_size +
+ len, P54_CONTROL_TYPE_EEPROM_READBACK,
+ GFP_KERNEL);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ mutex_lock(&priv->eeprom_mutex);
+ priv->eeprom = buf;
+ eeprom_hdr = (struct p54_eeprom_lm86 *) skb_put(skb,
+ eeprom_hdr_size + len);
+
+ if (priv->fw_var < 0x509) {
+ eeprom_hdr->v1.offset = cpu_to_le16(offset);
+ eeprom_hdr->v1.len = cpu_to_le16(len);
+ } else {
+ eeprom_hdr->v2.offset = cpu_to_le32(offset);
+ eeprom_hdr->v2.len = cpu_to_le16(len);
+ eeprom_hdr->v2.magic2 = 0xf;
+ memcpy(eeprom_hdr->v2.magic, (const char *)"LOCK", 4);
+ }
+
+ p54_tx(priv, skb);
+
+ if (!wait_for_completion_interruptible_timeout(
+ &priv->eeprom_comp, HZ)) {
+ printk(KERN_ERR "%s: device does not respond!\n",
+ wiphy_name(priv->hw->wiphy));
+ ret = -EBUSY;
+ }
+ priv->eeprom = NULL;
+ mutex_unlock(&priv->eeprom_mutex);
+ return ret;
+}
+
+int p54_update_beacon_tim(struct p54_common *priv, u16 aid, bool set)
+{
+ struct sk_buff *skb;
+ struct p54_tim *tim;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*tim),
+ P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ tim = (struct p54_tim *) skb_put(skb, sizeof(*tim));
+ tim->count = 1;
+ tim->entry[0] = cpu_to_le16(set ? (aid | 0x8000) : aid);
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_sta_unlock(struct p54_common *priv, u8 *addr)
+{
+ struct sk_buff *skb;
+ struct p54_sta_unlock *sta;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*sta),
+ P54_CONTROL_TYPE_PSM_STA_UNLOCK, GFP_ATOMIC);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ sta = (struct p54_sta_unlock *)skb_put(skb, sizeof(*sta));
+ memcpy(sta->addr, addr, ETH_ALEN);
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_tx_cancel(struct p54_common *priv, __le32 req_id)
+{
+ struct sk_buff *skb;
+ struct p54_txcancel *cancel;
+ u32 _req_id = le32_to_cpu(req_id);
+
+ if (unlikely(_req_id < priv->rx_start || _req_id > priv->rx_end))
+ return -EINVAL;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*cancel),
+ P54_CONTROL_TYPE_TXCANCEL, GFP_ATOMIC);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ cancel = (struct p54_txcancel *)skb_put(skb, sizeof(*cancel));
+ cancel->req_id = req_id;
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_setup_mac(struct p54_common *priv)
+{
+ struct sk_buff *skb;
+ struct p54_setup_mac *setup;
+ u16 mode;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*setup),
+ P54_CONTROL_TYPE_SETUP, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ setup = (struct p54_setup_mac *) skb_put(skb, sizeof(*setup));
+ if (!(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) {
+ switch (priv->mode) {
+ case NL80211_IFTYPE_STATION:
+ mode = P54_FILTER_TYPE_STATION;
+ break;
+ case NL80211_IFTYPE_AP:
+ mode = P54_FILTER_TYPE_AP;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ mode = P54_FILTER_TYPE_IBSS;
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ mode = P54_FILTER_TYPE_PROMISCUOUS;
+ break;
+ default:
+ mode = P54_FILTER_TYPE_HIBERNATE;
+ break;
+ }
+
+ /*
+ * "TRANSPARENT and PROMISCUOUS are mutually exclusive"
+ * STSW45X0C LMAC API - page 12
+ */
+ if (((priv->filter_flags & FIF_PROMISC_IN_BSS) ||
+ (priv->filter_flags & FIF_OTHER_BSS)) &&
+ (mode != P54_FILTER_TYPE_PROMISCUOUS))
+ mode |= P54_FILTER_TYPE_TRANSPARENT;
+ } else {
+ mode = P54_FILTER_TYPE_HIBERNATE;
+ }
+
+ setup->mac_mode = cpu_to_le16(mode);
+ memcpy(setup->mac_addr, priv->mac_addr, ETH_ALEN);
+ memcpy(setup->bssid, priv->bssid, ETH_ALEN);
+ setup->rx_antenna = 2 & priv->rx_diversity_mask; /* automatic */
+ setup->rx_align = 0;
+ if (priv->fw_var < 0x500) {
+ setup->v1.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
+ memset(setup->v1.rts_rates, 0, 8);
+ setup->v1.rx_addr = cpu_to_le32(priv->rx_end);
+ setup->v1.max_rx = cpu_to_le16(priv->rx_mtu);
+ setup->v1.rxhw = cpu_to_le16(priv->rxhw);
+ setup->v1.wakeup_timer = cpu_to_le16(priv->wakeup_timer);
+ setup->v1.unalloc0 = cpu_to_le16(0);
+ } else {
+ setup->v2.rx_addr = cpu_to_le32(priv->rx_end);
+ setup->v2.max_rx = cpu_to_le16(priv->rx_mtu);
+ setup->v2.rxhw = cpu_to_le16(priv->rxhw);
+ setup->v2.timer = cpu_to_le16(priv->wakeup_timer);
+ setup->v2.truncate = cpu_to_le16(48896);
+ setup->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
+ setup->v2.sbss_offset = 0;
+ setup->v2.mcast_window = 0;
+ setup->v2.rx_rssi_threshold = 0;
+ setup->v2.rx_ed_threshold = 0;
+ setup->v2.ref_clock = cpu_to_le32(644245094);
+ setup->v2.lpf_bandwidth = cpu_to_le16(65535);
+ setup->v2.osc_start_delay = cpu_to_le16(65535);
+ }
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_scan(struct p54_common *priv, u16 mode, u16 dwell)
+{
+ struct sk_buff *skb;
+ struct p54_hdr *hdr;
+ struct p54_scan_head *head;
+ struct p54_iq_autocal_entry *iq_autocal;
+ union p54_scan_body_union *body;
+ struct p54_scan_tail_rate *rate;
+ struct pda_rssi_cal_entry *rssi;
+ unsigned int i;
+ void *entry;
+ int band = priv->hw->conf.channel->band;
+ __le16 freq = cpu_to_le16(priv->hw->conf.channel->center_freq);
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) +
+ 2 + sizeof(*iq_autocal) + sizeof(*body) +
+ sizeof(*rate) + 2 * sizeof(*rssi),
+ P54_CONTROL_TYPE_SCAN, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ head = (struct p54_scan_head *) skb_put(skb, sizeof(*head));
+ memset(head->scan_params, 0, sizeof(head->scan_params));
+ head->mode = cpu_to_le16(mode);
+ head->dwell = cpu_to_le16(dwell);
+ head->freq = freq;
+
+ if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
+ __le16 *pa_power_points = (__le16 *) skb_put(skb, 2);
+ *pa_power_points = cpu_to_le16(0x0c);
+ }
+
+ iq_autocal = (void *) skb_put(skb, sizeof(*iq_autocal));
+ for (i = 0; i < priv->iq_autocal_len; i++) {
+ if (priv->iq_autocal[i].freq != freq)
+ continue;
+
+ memcpy(iq_autocal, &priv->iq_autocal[i].params,
+ sizeof(struct p54_iq_autocal_entry));
+ break;
+ }
+ if (i == priv->iq_autocal_len)
+ goto err;
+
+ if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW)
+ body = (void *) skb_put(skb, sizeof(body->longbow));
+ else
+ body = (void *) skb_put(skb, sizeof(body->normal));
+
+ for (i = 0; i < priv->output_limit->entries; i++) {
+ __le16 *entry_freq = (void *) (priv->output_limit->data +
+ priv->output_limit->entry_size * i);
+
+ if (*entry_freq != freq)
+ continue;
+
+ if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
+ memcpy(&body->longbow.power_limits,
+ (void *) entry_freq + sizeof(__le16),
+ priv->output_limit->entry_size);
+ } else {
+ struct pda_channel_output_limit *limits =
+ (void *) entry_freq;
+
+ body->normal.val_barker = 0x38;
+ body->normal.val_bpsk = body->normal.dup_bpsk =
+ limits->val_bpsk;
+ body->normal.val_qpsk = body->normal.dup_qpsk =
+ limits->val_qpsk;
+ body->normal.val_16qam = body->normal.dup_16qam =
+ limits->val_16qam;
+ body->normal.val_64qam = body->normal.dup_64qam =
+ limits->val_64qam;
+ }
+ break;
+ }
+ if (i == priv->output_limit->entries)
+ goto err;
+
+ entry = (void *)(priv->curve_data->data + priv->curve_data->offset);
+ for (i = 0; i < priv->curve_data->entries; i++) {
+ if (*((__le16 *)entry) != freq) {
+ entry += priv->curve_data->entry_size;
+ continue;
+ }
+
+ if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
+ memcpy(&body->longbow.curve_data,
+ (void *) entry + sizeof(__le16),
+ priv->curve_data->entry_size);
+ } else {
+ struct p54_scan_body *chan = &body->normal;
+ struct pda_pa_curve_data *curve_data =
+ (void *) priv->curve_data->data;
+
+ entry += sizeof(__le16);
+ chan->pa_points_per_curve = 8;
+ memset(chan->curve_data, 0, sizeof(*chan->curve_data));
+ memcpy(chan->curve_data, entry,
+ sizeof(struct p54_pa_curve_data_sample) *
+ min((u8)8, curve_data->points_per_channel));
+ }
+ break;
+ }
+ if (i == priv->curve_data->entries)
+ goto err;
+
+ if ((priv->fw_var >= 0x500) && (priv->fw_var < 0x509)) {
+ rate = (void *) skb_put(skb, sizeof(*rate));
+ rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
+ for (i = 0; i < sizeof(rate->rts_rates); i++)
+ rate->rts_rates[i] = i;
+ }
+
+ rssi = (struct pda_rssi_cal_entry *) skb_put(skb, sizeof(*rssi));
+ rssi->mul = cpu_to_le16(priv->rssical_db[band].mul);
+ rssi->add = cpu_to_le16(priv->rssical_db[band].add);
+ if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
+ /* Longbow frontend needs ever more */
+ rssi = (void *) skb_put(skb, sizeof(*rssi));
+ rssi->mul = cpu_to_le16(priv->rssical_db[band].longbow_unkn);
+ rssi->add = cpu_to_le16(priv->rssical_db[band].longbow_unk2);
+ }
+
+ if (priv->fw_var >= 0x509) {
+ rate = (void *) skb_put(skb, sizeof(*rate));
+ rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
+ for (i = 0; i < sizeof(rate->rts_rates); i++)
+ rate->rts_rates[i] = i;
+ }
+
+ hdr = (struct p54_hdr *) skb->data;
+ hdr->len = cpu_to_le16(skb->len - sizeof(*hdr));
+
+ p54_tx(priv, skb);
+ return 0;
+
+err:
+ printk(KERN_ERR "%s: frequency change to channel %d failed.\n",
+ wiphy_name(priv->hw->wiphy), ieee80211_frequency_to_channel(
+ priv->hw->conf.channel->center_freq));
+
+ dev_kfree_skb_any(skb);
+ return -EINVAL;
+}
+
+int p54_set_leds(struct p54_common *priv)
+{
+ struct sk_buff *skb;
+ struct p54_led *led;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*led),
+ P54_CONTROL_TYPE_LED, GFP_ATOMIC);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ led = (struct p54_led *) skb_put(skb, sizeof(*led));
+ led->flags = cpu_to_le16(0x0003);
+ led->mask[0] = led->mask[1] = cpu_to_le16(priv->softled_state);
+ led->delay[0] = cpu_to_le16(1);
+ led->delay[1] = cpu_to_le16(0);
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_set_edcf(struct p54_common *priv)
+{
+ struct sk_buff *skb;
+ struct p54_edcf *edcf;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*edcf),
+ P54_CONTROL_TYPE_DCFINIT, GFP_ATOMIC);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ edcf = (struct p54_edcf *)skb_put(skb, sizeof(*edcf));
+ if (priv->use_short_slot) {
+ edcf->slottime = 9;
+ edcf->sifs = 0x10;
+ edcf->eofpad = 0x00;
+ } else {
+ edcf->slottime = 20;
+ edcf->sifs = 0x0a;
+ edcf->eofpad = 0x06;
+ }
+ /* (see prism54/isl_oid.h for further details) */
+ edcf->frameburst = cpu_to_le16(0);
+ edcf->round_trip_delay = cpu_to_le16(0);
+ edcf->flags = 0;
+ memset(edcf->mapping, 0, sizeof(edcf->mapping));
+ memcpy(edcf->queue, priv->qos_params, sizeof(edcf->queue));
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_set_ps(struct p54_common *priv)
+{
+ struct sk_buff *skb;
+ struct p54_psm *psm;
+ unsigned int i;
+ u16 mode;
+
+ if (priv->hw->conf.flags & IEEE80211_CONF_PS &&
+ !priv->powersave_override)
+ mode = P54_PSM | P54_PSM_BEACON_TIMEOUT | P54_PSM_DTIM |
+ P54_PSM_CHECKSUM | P54_PSM_MCBC;
+ else
+ mode = P54_PSM_CAM;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*psm),
+ P54_CONTROL_TYPE_PSM, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ psm = (struct p54_psm *)skb_put(skb, sizeof(*psm));
+ psm->mode = cpu_to_le16(mode);
+ psm->aid = cpu_to_le16(priv->aid);
+ for (i = 0; i < ARRAY_SIZE(psm->intervals); i++) {
+ psm->intervals[i].interval =
+ cpu_to_le16(priv->hw->conf.listen_interval);
+ psm->intervals[i].periods = cpu_to_le16(1);
+ }
+
+ psm->beacon_rssi_skip_max = 200;
+ psm->rssi_delta_threshold = 0;
+ psm->nr = 1;
+ psm->exclude[0] = WLAN_EID_TIM;
+
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_init_xbow_synth(struct p54_common *priv)
+{
+ struct sk_buff *skb;
+ struct p54_xbow_synth *xbow;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*xbow),
+ P54_CONTROL_TYPE_XBOW_SYNTH_CFG, GFP_KERNEL);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ xbow = (struct p54_xbow_synth *)skb_put(skb, sizeof(*xbow));
+ xbow->magic1 = cpu_to_le16(0x1);
+ xbow->magic2 = cpu_to_le16(0x2);
+ xbow->freq = cpu_to_le16(5390);
+ memset(xbow->padding, 0, sizeof(xbow->padding));
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_upload_key(struct p54_common *priv, u8 algo, int slot, u8 idx, u8 len,
+ u8 *addr, u8* key)
+{
+ struct sk_buff *skb;
+ struct p54_keycache *rxkey;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*rxkey),
+ P54_CONTROL_TYPE_RX_KEYCACHE, GFP_KERNEL);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ rxkey = (struct p54_keycache *)skb_put(skb, sizeof(*rxkey));
+ rxkey->entry = slot;
+ rxkey->key_id = idx;
+ rxkey->key_type = algo;
+ if (addr)
+ memcpy(rxkey->mac, addr, ETH_ALEN);
+ else
+ memset(rxkey->mac, ~0, ETH_ALEN);
+
+ switch (algo) {
+ case P54_CRYPTO_WEP:
+ case P54_CRYPTO_AESCCMP:
+ rxkey->key_len = min_t(u8, 16, len);
+ memcpy(rxkey->key, key, rxkey->key_len);
+ break;
+
+ case P54_CRYPTO_TKIPMICHAEL:
+ rxkey->key_len = 24;
+ memcpy(rxkey->key, key, 16);
+ memcpy(&(rxkey->key[16]), &(key
+ [NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY]), 8);
+ break;
+
+ case P54_CRYPTO_NONE:
+ rxkey->key_len = 0;
+ memset(rxkey->key, 0, sizeof(rxkey->key));
+ break;
+
+ default:
+ printk(KERN_ERR "%s: invalid cryptographic algorithm: %d\n",
+ wiphy_name(priv->hw->wiphy), algo);
+ dev_kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ p54_tx(priv, skb);
+ return 0;
+}
+
+int p54_fetch_statistics(struct p54_common *priv)
+{
+ struct ieee80211_tx_info *txinfo;
+ struct p54_tx_info *p54info;
+ struct sk_buff *skb;
+
+ skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL,
+ sizeof(struct p54_statistics),
+ P54_CONTROL_TYPE_STAT_READBACK, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ /*
+ * The statistic feedback causes some extra headaches here, if it
+ * is not to crash/corrupt the firmware data structures.
+ *
+ * Unlike all other Control Get OIDs we can not use helpers like
+ * skb_put to reserve the space for the data we're requesting.
+ * Instead the extra frame length -which will hold the results later-
+ * will only be told to the p54_assign_address, so that following
+ * frames won't be placed into the allegedly empty area.
+ */
+ txinfo = IEEE80211_SKB_CB(skb);
+ p54info = (void *) txinfo->rate_driver_data;
+ p54info->extra_len = sizeof(struct p54_statistics);
+
+ p54_tx(priv, skb);
+ return 0;
+}
diff --git a/drivers/net/wireless/p54/led.c b/drivers/net/wireless/p54/led.c
new file mode 100644
index 0000000..9575ac0
--- /dev/null
+++ b/drivers/net/wireless/p54/led.c
@@ -0,0 +1,162 @@
+/*
+ * Common code for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ * - stlc45xx driver
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+
+#include <net/mac80211.h>
+#ifdef CONFIG_P54_LEDS
+#include <linux/leds.h>
+#endif /* CONFIG_P54_LEDS */
+
+#include "p54.h"
+#include "lmac.h"
+
+static void p54_update_leds(struct work_struct *work)
+{
+ struct p54_common *priv = container_of(work, struct p54_common,
+ led_work.work);
+ int err, i, tmp, blink_delay = 400;
+ bool rerun = false;
+
+ /* Don't toggle the LED, when the device is down. */
+ if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+ return ;
+
+ for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
+ if (priv->leds[i].toggled) {
+ priv->softled_state |= BIT(i);
+
+ tmp = 70 + 200 / (priv->leds[i].toggled);
+ if (tmp < blink_delay)
+ blink_delay = tmp;
+
+ if (priv->leds[i].led_dev.brightness == LED_OFF)
+ rerun = true;
+
+ priv->leds[i].toggled =
+ !!priv->leds[i].led_dev.brightness;
+ } else
+ priv->softled_state &= ~BIT(i);
+
+ err = p54_set_leds(priv);
+ if (err && net_ratelimit())
+ printk(KERN_ERR "%s: failed to update LEDs (%d).\n",
+ wiphy_name(priv->hw->wiphy), err);
+
+ if (rerun)
+ ieee80211_queue_delayed_work(priv->hw, &priv->led_work,
+ msecs_to_jiffies(blink_delay));
+}
+
+static void p54_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct p54_led_dev *led = container_of(led_dev, struct p54_led_dev,
+ led_dev);
+ struct ieee80211_hw *dev = led->hw_dev;
+ struct p54_common *priv = dev->priv;
+
+ if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+ return ;
+
+ if ((brightness) && (led->registered)) {
+ led->toggled++;
+ ieee80211_queue_delayed_work(priv->hw, &priv->led_work, HZ/10);
+ }
+}
+
+static int p54_register_led(struct p54_common *priv,
+ unsigned int led_index,
+ char *name, char *trigger)
+{
+ struct p54_led_dev *led = &priv->leds[led_index];
+ int err;
+
+ if (led->registered)
+ return -EEXIST;
+
+ snprintf(led->name, sizeof(led->name), "p54-%s::%s",
+ wiphy_name(priv->hw->wiphy), name);
+ led->hw_dev = priv->hw;
+ led->index = led_index;
+ led->led_dev.name = led->name;
+ led->led_dev.default_trigger = trigger;
+ led->led_dev.brightness_set = p54_led_brightness_set;
+
+ err = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_dev);
+ if (err)
+ printk(KERN_ERR "%s: Failed to register %s LED.\n",
+ wiphy_name(priv->hw->wiphy), name);
+ else
+ led->registered = 1;
+
+ return err;
+}
+
+int p54_init_leds(struct p54_common *priv)
+{
+ int err;
+
+ /*
+ * TODO:
+ * Figure out if the EEPROM contains some hints about the number
+ * of available/programmable LEDs of the device.
+ */
+
+ INIT_DELAYED_WORK(&priv->led_work, p54_update_leds);
+
+ err = p54_register_led(priv, 0, "assoc",
+ ieee80211_get_assoc_led_name(priv->hw));
+ if (err)
+ return err;
+
+ err = p54_register_led(priv, 1, "tx",
+ ieee80211_get_tx_led_name(priv->hw));
+ if (err)
+ return err;
+
+ err = p54_register_led(priv, 2, "rx",
+ ieee80211_get_rx_led_name(priv->hw));
+ if (err)
+ return err;
+
+ err = p54_register_led(priv, 3, "radio",
+ ieee80211_get_radio_led_name(priv->hw));
+ if (err)
+ return err;
+
+ err = p54_set_leds(priv);
+ return err;
+}
+
+void p54_unregister_leds(struct p54_common *priv)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(priv->leds); i++) {
+ if (priv->leds[i].registered) {
+ priv->leds[i].registered = false;
+ priv->leds[i].toggled = 0;
+ led_classdev_unregister(&priv->leds[i].led_dev);
+ }
+ }
+
+ cancel_delayed_work_sync(&priv->led_work);
+}
diff --git a/drivers/net/wireless/p54/lmac.h b/drivers/net/wireless/p54/lmac.h
new file mode 100644
index 0000000..04b63ec
--- /dev/null
+++ b/drivers/net/wireless/p54/lmac.h
@@ -0,0 +1,558 @@
+/*
+ * LMAC Interface specific definitions for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007 - 2009, Christian Lamparter <chunkeey@web.de>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * - LMAC API interface header file for STLC4560 (lmac_longbow.h)
+ * Copyright (C) 2007 Conexant Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef LMAC_H
+#define LMAC_H
+
+enum p54_control_frame_types {
+ P54_CONTROL_TYPE_SETUP = 0,
+ P54_CONTROL_TYPE_SCAN,
+ P54_CONTROL_TYPE_TRAP,
+ P54_CONTROL_TYPE_DCFINIT,
+ P54_CONTROL_TYPE_RX_KEYCACHE,
+ P54_CONTROL_TYPE_TIM,
+ P54_CONTROL_TYPE_PSM,
+ P54_CONTROL_TYPE_TXCANCEL,
+ P54_CONTROL_TYPE_TXDONE,
+ P54_CONTROL_TYPE_BURST,
+ P54_CONTROL_TYPE_STAT_READBACK,
+ P54_CONTROL_TYPE_BBP,
+ P54_CONTROL_TYPE_EEPROM_READBACK,
+ P54_CONTROL_TYPE_LED,
+ P54_CONTROL_TYPE_GPIO,
+ P54_CONTROL_TYPE_TIMER,
+ P54_CONTROL_TYPE_MODULATION,
+ P54_CONTROL_TYPE_SYNTH_CONFIG,
+ P54_CONTROL_TYPE_DETECTOR_VALUE,
+ P54_CONTROL_TYPE_XBOW_SYNTH_CFG,
+ P54_CONTROL_TYPE_CCE_QUIET,
+ P54_CONTROL_TYPE_PSM_STA_UNLOCK,
+ P54_CONTROL_TYPE_PCS,
+ P54_CONTROL_TYPE_BT_BALANCER = 28,
+ P54_CONTROL_TYPE_GROUP_ADDRESS_TABLE = 30,
+ P54_CONTROL_TYPE_ARPTABLE = 31,
+ P54_CONTROL_TYPE_BT_OPTIONS = 35,
+};
+
+#define P54_HDR_FLAG_CONTROL BIT(15)
+#define P54_HDR_FLAG_CONTROL_OPSET (BIT(15) + BIT(0))
+#define P54_HDR_FLAG_DATA_ALIGN BIT(14)
+
+#define P54_HDR_FLAG_DATA_OUT_PROMISC BIT(0)
+#define P54_HDR_FLAG_DATA_OUT_TIMESTAMP BIT(1)
+#define P54_HDR_FLAG_DATA_OUT_SEQNR BIT(2)
+#define P54_HDR_FLAG_DATA_OUT_BIT3 BIT(3)
+#define P54_HDR_FLAG_DATA_OUT_BURST BIT(4)
+#define P54_HDR_FLAG_DATA_OUT_NOCANCEL BIT(5)
+#define P54_HDR_FLAG_DATA_OUT_CLEARTIM BIT(6)
+#define P54_HDR_FLAG_DATA_OUT_HITCHHIKE BIT(7)
+#define P54_HDR_FLAG_DATA_OUT_COMPRESS BIT(8)
+#define P54_HDR_FLAG_DATA_OUT_CONCAT BIT(9)
+#define P54_HDR_FLAG_DATA_OUT_PCS_ACCEPT BIT(10)
+#define P54_HDR_FLAG_DATA_OUT_WAITEOSP BIT(11)
+
+#define P54_HDR_FLAG_DATA_IN_FCS_GOOD BIT(0)
+#define P54_HDR_FLAG_DATA_IN_MATCH_MAC BIT(1)
+#define P54_HDR_FLAG_DATA_IN_MCBC BIT(2)
+#define P54_HDR_FLAG_DATA_IN_BEACON BIT(3)
+#define P54_HDR_FLAG_DATA_IN_MATCH_BSS BIT(4)
+#define P54_HDR_FLAG_DATA_IN_BCAST_BSS BIT(5)
+#define P54_HDR_FLAG_DATA_IN_DATA BIT(6)
+#define P54_HDR_FLAG_DATA_IN_TRUNCATED BIT(7)
+#define P54_HDR_FLAG_DATA_IN_BIT8 BIT(8)
+#define P54_HDR_FLAG_DATA_IN_TRANSPARENT BIT(9)
+
+struct p54_hdr {
+ __le16 flags;
+ __le16 len;
+ __le32 req_id;
+ __le16 type; /* enum p54_control_frame_types */
+ u8 rts_tries;
+ u8 tries;
+ u8 data[0];
+} __packed;
+
+#define GET_REQ_ID(skb) \
+ (((struct p54_hdr *) ((struct sk_buff *) skb)->data)->req_id) \
+
+#define FREE_AFTER_TX(skb) \
+ ((((struct p54_hdr *) ((struct sk_buff *) skb)->data)-> \
+ flags) == cpu_to_le16(P54_HDR_FLAG_CONTROL_OPSET))
+
+#define IS_DATA_FRAME(skb) \
+ (!((((struct p54_hdr *) ((struct sk_buff *) skb)->data)-> \
+ flags) & cpu_to_le16(P54_HDR_FLAG_CONTROL)))
+
+#define GET_HW_QUEUE(skb) \
+ (((struct p54_tx_data *)((struct p54_hdr *) \
+ skb->data)->data)->hw_queue)
+
+/*
+ * shared interface ID definitions
+ * The interface ID is a unique identification of a specific interface.
+ * The following values are reserved: 0x0000, 0x0002, 0x0012, 0x0014, 0x0015
+ */
+#define IF_ID_ISL36356A 0x0001 /* ISL36356A <-> Firmware */
+#define IF_ID_MVC 0x0003 /* MAC Virtual Coprocessor */
+#define IF_ID_DEBUG 0x0008 /* PolDebug Interface */
+#define IF_ID_PRODUCT 0x0009
+#define IF_ID_OEM 0x000a
+#define IF_ID_PCI3877 0x000b /* 3877 <-> Host PCI */
+#define IF_ID_ISL37704C 0x000c /* ISL37704C <-> Fw */
+#define IF_ID_ISL39000 0x000f /* ISL39000 <-> Fw */
+#define IF_ID_ISL39300A 0x0010 /* ISL39300A <-> Fw */
+#define IF_ID_ISL37700_UAP 0x0016 /* ISL37700 uAP Fw <-> Fw */
+#define IF_ID_ISL39000_UAP 0x0017 /* ISL39000 uAP Fw <-> Fw */
+#define IF_ID_LMAC 0x001a /* Interface exposed by LMAC */
+
+struct exp_if {
+ __le16 role;
+ __le16 if_id;
+ __le16 variant;
+ __le16 btm_compat;
+ __le16 top_compat;
+} __packed;
+
+struct dep_if {
+ __le16 role;
+ __le16 if_id;
+ __le16 variant;
+} __packed;
+
+/* driver <-> lmac definitions */
+struct p54_eeprom_lm86 {
+ union {
+ struct {
+ __le16 offset;
+ __le16 len;
+ u8 data[0];
+ } __packed v1;
+ struct {
+ __le32 offset;
+ __le16 len;
+ u8 magic2;
+ u8 pad;
+ u8 magic[4];
+ u8 data[0];
+ } __packed v2;
+ } __packed;
+} __packed;
+
+enum p54_rx_decrypt_status {
+ P54_DECRYPT_NONE = 0,
+ P54_DECRYPT_OK,
+ P54_DECRYPT_NOKEY,
+ P54_DECRYPT_NOMICHAEL,
+ P54_DECRYPT_NOCKIPMIC,
+ P54_DECRYPT_FAIL_WEP,
+ P54_DECRYPT_FAIL_TKIP,
+ P54_DECRYPT_FAIL_MICHAEL,
+ P54_DECRYPT_FAIL_CKIPKP,
+ P54_DECRYPT_FAIL_CKIPMIC,
+ P54_DECRYPT_FAIL_AESCCMP
+};
+
+struct p54_rx_data {
+ __le16 flags;
+ __le16 len;
+ __le16 freq;
+ u8 antenna;
+ u8 rate;
+ u8 rssi;
+ u8 quality;
+ u8 decrypt_status;
+ u8 rssi_raw;
+ __le32 tsf32;
+ __le32 unalloc0;
+ u8 align[0];
+} __packed;
+
+enum p54_trap_type {
+ P54_TRAP_SCAN = 0,
+ P54_TRAP_TIMER,
+ P54_TRAP_BEACON_TX,
+ P54_TRAP_FAA_RADIO_ON,
+ P54_TRAP_FAA_RADIO_OFF,
+ P54_TRAP_RADAR,
+ P54_TRAP_NO_BEACON,
+ P54_TRAP_TBTT,
+ P54_TRAP_SCO_ENTER,
+ P54_TRAP_SCO_EXIT
+};
+
+struct p54_trap {
+ __le16 event;
+ __le16 frequency;
+} __packed;
+
+enum p54_frame_sent_status {
+ P54_TX_OK = 0,
+ P54_TX_FAILED,
+ P54_TX_PSM,
+ P54_TX_PSM_CANCELLED = 4
+};
+
+struct p54_frame_sent {
+ u8 status;
+ u8 tries;
+ u8 ack_rssi;
+ u8 quality;
+ __le16 seq;
+ u8 antenna;
+ u8 padding;
+} __packed;
+
+enum p54_tx_data_crypt {
+ P54_CRYPTO_NONE = 0,
+ P54_CRYPTO_WEP,
+ P54_CRYPTO_TKIP,
+ P54_CRYPTO_TKIPMICHAEL,
+ P54_CRYPTO_CCX_WEPMIC,
+ P54_CRYPTO_CCX_KPMIC,
+ P54_CRYPTO_CCX_KP,
+ P54_CRYPTO_AESCCMP
+};
+
+enum p54_tx_data_queue {
+ P54_QUEUE_BEACON = 0,
+ P54_QUEUE_FWSCAN = 1,
+ P54_QUEUE_MGMT = 2,
+ P54_QUEUE_CAB = 3,
+ P54_QUEUE_DATA = 4,
+
+ P54_QUEUE_AC_NUM = 4,
+ P54_QUEUE_AC_VO = 4,
+ P54_QUEUE_AC_VI = 5,
+ P54_QUEUE_AC_BE = 6,
+ P54_QUEUE_AC_BK = 7,
+
+ /* keep last */
+ P54_QUEUE_NUM = 8,
+};
+
+#define IS_QOS_QUEUE(n) (n >= P54_QUEUE_DATA)
+
+struct p54_tx_data {
+ u8 rateset[8];
+ u8 rts_rate_idx;
+ u8 crypt_offset;
+ u8 key_type;
+ u8 key_len;
+ u8 key[16];
+ u8 hw_queue;
+ u8 backlog;
+ __le16 durations[4];
+ u8 tx_antenna;
+ union {
+ struct {
+ u8 cts_rate;
+ __le16 output_power;
+ } __packed longbow;
+ struct {
+ u8 output_power;
+ u8 cts_rate;
+ u8 unalloc;
+ } __packed normal;
+ } __packed;
+ u8 unalloc2[2];
+ u8 align[0];
+} __packed;
+
+/* unit is ms */
+#define P54_TX_FRAME_LIFETIME 2000
+#define P54_TX_TIMEOUT 4000
+#define P54_STATISTICS_UPDATE 5000
+
+#define P54_FILTER_TYPE_NONE 0
+#define P54_FILTER_TYPE_STATION BIT(0)
+#define P54_FILTER_TYPE_IBSS BIT(1)
+#define P54_FILTER_TYPE_AP BIT(2)
+#define P54_FILTER_TYPE_TRANSPARENT BIT(3)
+#define P54_FILTER_TYPE_PROMISCUOUS BIT(4)
+#define P54_FILTER_TYPE_HIBERNATE BIT(5)
+#define P54_FILTER_TYPE_NOACK BIT(6)
+#define P54_FILTER_TYPE_RX_DISABLED BIT(7)
+
+struct p54_setup_mac {
+ __le16 mac_mode;
+ u8 mac_addr[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ u8 rx_antenna;
+ u8 rx_align;
+ union {
+ struct {
+ __le32 basic_rate_mask;
+ u8 rts_rates[8];
+ __le32 rx_addr;
+ __le16 max_rx;
+ __le16 rxhw;
+ __le16 wakeup_timer;
+ __le16 unalloc0;
+ } __packed v1;
+ struct {
+ __le32 rx_addr;
+ __le16 max_rx;
+ __le16 rxhw;
+ __le16 timer;
+ __le16 truncate;
+ __le32 basic_rate_mask;
+ u8 sbss_offset;
+ u8 mcast_window;
+ u8 rx_rssi_threshold;
+ u8 rx_ed_threshold;
+ __le32 ref_clock;
+ __le16 lpf_bandwidth;
+ __le16 osc_start_delay;
+ } __packed v2;
+ } __packed;
+} __packed;
+
+#define P54_SETUP_V1_LEN 40
+#define P54_SETUP_V2_LEN (sizeof(struct p54_setup_mac))
+
+#define P54_SCAN_EXIT BIT(0)
+#define P54_SCAN_TRAP BIT(1)
+#define P54_SCAN_ACTIVE BIT(2)
+#define P54_SCAN_FILTER BIT(3)
+
+struct p54_scan_head {
+ __le16 mode;
+ __le16 dwell;
+ u8 scan_params[20];
+ __le16 freq;
+} __packed;
+
+struct p54_pa_curve_data_sample {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 data_barker;
+ u8 data_bpsk;
+ u8 data_qpsk;
+ u8 data_16qam;
+ u8 data_64qam;
+ u8 padding;
+} __packed;
+
+struct p54_scan_body {
+ u8 pa_points_per_curve;
+ u8 val_barker;
+ u8 val_bpsk;
+ u8 val_qpsk;
+ u8 val_16qam;
+ u8 val_64qam;
+ struct p54_pa_curve_data_sample curve_data[8];
+ u8 dup_bpsk;
+ u8 dup_qpsk;
+ u8 dup_16qam;
+ u8 dup_64qam;
+} __packed;
+
+/*
+ * Warning: Longbow's structures are bogus.
+ */
+struct p54_channel_output_limit_longbow {
+ __le16 rf_power_points[12];
+} __packed;
+
+struct p54_pa_curve_data_sample_longbow {
+ __le16 rf_power;
+ __le16 pa_detector;
+ struct {
+ __le16 data[4];
+ } points[3] __packed;
+} __packed;
+
+struct p54_scan_body_longbow {
+ struct p54_channel_output_limit_longbow power_limits;
+ struct p54_pa_curve_data_sample_longbow curve_data[8];
+ __le16 unkn[6]; /* maybe more power_limits or rate_mask */
+} __packed;
+
+union p54_scan_body_union {
+ struct p54_scan_body normal;
+ struct p54_scan_body_longbow longbow;
+} __packed;
+
+struct p54_scan_tail_rate {
+ __le32 basic_rate_mask;
+ u8 rts_rates[8];
+} __packed;
+
+struct p54_led {
+ __le16 flags;
+ __le16 mask[2];
+ __le16 delay[2];
+} __packed;
+
+struct p54_edcf {
+ u8 flags;
+ u8 slottime;
+ u8 sifs;
+ u8 eofpad;
+ struct p54_edcf_queue_param queue[8];
+ u8 mapping[4];
+ __le16 frameburst;
+ __le16 round_trip_delay;
+} __packed;
+
+struct p54_statistics {
+ __le32 rx_success;
+ __le32 rx_bad_fcs;
+ __le32 rx_abort;
+ __le32 rx_abort_phy;
+ __le32 rts_success;
+ __le32 rts_fail;
+ __le32 tsf32;
+ __le32 airtime;
+ __le32 noise;
+ __le32 sample_noise[8];
+ __le32 sample_cca;
+ __le32 sample_tx;
+} __packed;
+
+struct p54_xbow_synth {
+ __le16 magic1;
+ __le16 magic2;
+ __le16 freq;
+ u32 padding[5];
+} __packed;
+
+struct p54_timer {
+ __le32 interval;
+} __packed;
+
+struct p54_keycache {
+ u8 entry;
+ u8 key_id;
+ u8 mac[ETH_ALEN];
+ u8 padding[2];
+ u8 key_type;
+ u8 key_len;
+ u8 key[24];
+} __packed;
+
+struct p54_burst {
+ u8 flags;
+ u8 queue;
+ u8 backlog;
+ u8 pad;
+ __le16 durations[32];
+} __packed;
+
+struct p54_psm_interval {
+ __le16 interval;
+ __le16 periods;
+} __packed;
+
+#define P54_PSM_CAM 0
+#define P54_PSM BIT(0)
+#define P54_PSM_DTIM BIT(1)
+#define P54_PSM_MCBC BIT(2)
+#define P54_PSM_CHECKSUM BIT(3)
+#define P54_PSM_SKIP_MORE_DATA BIT(4)
+#define P54_PSM_BEACON_TIMEOUT BIT(5)
+#define P54_PSM_HFOSLEEP BIT(6)
+#define P54_PSM_AUTOSWITCH_SLEEP BIT(7)
+#define P54_PSM_LPIT BIT(8)
+#define P54_PSM_BF_UCAST_SKIP BIT(9)
+#define P54_PSM_BF_MCAST_SKIP BIT(10)
+
+struct p54_psm {
+ __le16 mode;
+ __le16 aid;
+ struct p54_psm_interval intervals[4];
+ u8 beacon_rssi_skip_max;
+ u8 rssi_delta_threshold;
+ u8 nr;
+ u8 exclude[1];
+} __packed;
+
+#define MC_FILTER_ADDRESS_NUM 4
+
+struct p54_group_address_table {
+ __le16 filter_enable;
+ __le16 num_address;
+ u8 mac_list[MC_FILTER_ADDRESS_NUM][ETH_ALEN];
+} __packed;
+
+struct p54_txcancel {
+ __le32 req_id;
+} __packed;
+
+struct p54_sta_unlock {
+ u8 addr[ETH_ALEN];
+ u16 padding;
+} __packed;
+
+#define P54_TIM_CLEAR BIT(15)
+struct p54_tim {
+ u8 count;
+ u8 padding[3];
+ __le16 entry[8];
+} __packed;
+
+struct p54_cce_quiet {
+ __le32 period;
+} __packed;
+
+struct p54_bt_balancer {
+ __le16 prio_thresh;
+ __le16 acl_thresh;
+} __packed;
+
+struct p54_arp_table {
+ __le16 filter_enable;
+ u8 ipv4_addr[4];
+} __packed;
+
+/* LED control */
+int p54_set_leds(struct p54_common *priv);
+int p54_init_leds(struct p54_common *priv);
+void p54_unregister_leds(struct p54_common *priv);
+
+/* xmit functions */
+int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb);
+int p54_tx_cancel(struct p54_common *priv, __le32 req_id);
+void p54_tx(struct p54_common *priv, struct sk_buff *skb);
+
+/* synth/phy configuration */
+int p54_init_xbow_synth(struct p54_common *priv);
+int p54_scan(struct p54_common *priv, u16 mode, u16 dwell);
+
+/* MAC */
+int p54_sta_unlock(struct p54_common *priv, u8 *addr);
+int p54_update_beacon_tim(struct p54_common *priv, u16 aid, bool set);
+int p54_setup_mac(struct p54_common *priv);
+int p54_set_ps(struct p54_common *priv);
+int p54_fetch_statistics(struct p54_common *priv);
+
+/* e/v DCF setup */
+int p54_set_edcf(struct p54_common *priv);
+
+/* cryptographic engine */
+int p54_upload_key(struct p54_common *priv, u8 algo, int slot,
+ u8 idx, u8 len, u8 *addr, u8* key);
+
+/* eeprom */
+int p54_download_eeprom(struct p54_common *priv, void *buf,
+ u16 offset, u16 len);
+
+/* utility */
+u8 *p54_find_ie(struct sk_buff *skb, u8 ie);
+
+#endif /* LMAC_H */
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
new file mode 100644
index 0000000..4d486bf
--- /dev/null
+++ b/drivers/net/wireless/p54/main.c
@@ -0,0 +1,648 @@
+/*
+ * mac80211 glue code for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ * - stlc45xx driver
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "lmac.h"
+
+static int modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_DESCRIPTION("Softmac Prism54 common code");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("prism54common");
+
+static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
+ enum sta_notify_cmd notify_cmd,
+ struct ieee80211_sta *sta)
+{
+ struct p54_common *priv = dev->priv;
+ switch (notify_cmd) {
+ case STA_NOTIFY_ADD:
+ case STA_NOTIFY_REMOVE:
+ /*
+ * Notify the firmware that we don't want or we don't
+ * need to buffer frames for this station anymore.
+ */
+
+ p54_sta_unlock(priv, sta->addr);
+ break;
+ case STA_NOTIFY_AWAKE:
+ /* update the firmware's filter table */
+ p54_sta_unlock(priv, sta->addr);
+ break;
+ default:
+ break;
+ }
+}
+
+static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
+ bool set)
+{
+ struct p54_common *priv = dev->priv;
+
+ return p54_update_beacon_tim(priv, sta->aid, set);
+}
+
+u8 *p54_find_ie(struct sk_buff *skb, u8 ie)
+{
+ struct ieee80211_mgmt *mgmt = (void *)skb->data;
+ u8 *pos, *end;
+
+ if (skb->len <= sizeof(mgmt))
+ return NULL;
+
+ pos = (u8 *)mgmt->u.beacon.variable;
+ end = skb->data + skb->len;
+ while (pos < end) {
+ if (pos + 2 + pos[1] > end)
+ return NULL;
+
+ if (pos[0] == ie)
+ return pos;
+
+ pos += 2 + pos[1];
+ }
+ return NULL;
+}
+
+static int p54_beacon_format_ie_tim(struct sk_buff *skb)
+{
+ /*
+ * the good excuse for this mess is ... the firmware.
+ * The dummy TIM MUST be at the end of the beacon frame,
+ * because it'll be overwritten!
+ */
+ u8 *tim;
+ u8 dtim_len;
+ u8 dtim_period;
+ u8 *next;
+
+ tim = p54_find_ie(skb, WLAN_EID_TIM);
+ if (!tim)
+ return 0;
+
+ dtim_len = tim[1];
+ dtim_period = tim[3];
+ next = tim + 2 + dtim_len;
+
+ if (dtim_len < 3)
+ return -EINVAL;
+
+ memmove(tim, next, skb_tail_pointer(skb) - next);
+ tim = skb_tail_pointer(skb) - (dtim_len + 2);
+
+ /* add the dummy at the end */
+ tim[0] = WLAN_EID_TIM;
+ tim[1] = 3;
+ tim[2] = 0;
+ tim[3] = dtim_period;
+ tim[4] = 0;
+
+ if (dtim_len > 3)
+ skb_trim(skb, skb->len - (dtim_len - 3));
+
+ return 0;
+}
+
+static int p54_beacon_update(struct p54_common *priv,
+ struct ieee80211_vif *vif)
+{
+ struct sk_buff *beacon;
+ int ret;
+
+ beacon = ieee80211_beacon_get(priv->hw, vif);
+ if (!beacon)
+ return -ENOMEM;
+ ret = p54_beacon_format_ie_tim(beacon);
+ if (ret)
+ return ret;
+
+ /*
+ * During operation, the firmware takes care of beaconing.
+ * The driver only needs to upload a new beacon template, once
+ * the template was changed by the stack or userspace.
+ *
+ * LMAC API 3.2.2 also specifies that the driver does not need
+ * to cancel the old beacon template by hand, instead the firmware
+ * will release the previous one through the feedback mechanism.
+ */
+ WARN_ON(p54_tx_80211(priv->hw, beacon));
+ priv->tsf_high32 = 0;
+ priv->tsf_low32 = 0;
+
+ return 0;
+}
+
+static int p54_start(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ int err;
+
+ mutex_lock(&priv->conf_mutex);
+ err = priv->open(dev);
+ if (err)
+ goto out;
+ P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47);
+ P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94);
+ P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0);
+ P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0);
+ err = p54_set_edcf(priv);
+ if (err)
+ goto out;
+
+ memset(priv->bssid, ~0, ETH_ALEN);
+ priv->mode = NL80211_IFTYPE_MONITOR;
+ err = p54_setup_mac(priv);
+ if (err) {
+ priv->mode = NL80211_IFTYPE_UNSPECIFIED;
+ goto out;
+ }
+
+ ieee80211_queue_delayed_work(dev, &priv->work, 0);
+
+ priv->softled_state = 0;
+ err = p54_set_leds(priv);
+
+out:
+ mutex_unlock(&priv->conf_mutex);
+ return err;
+}
+
+static void p54_stop(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ int i;
+
+ mutex_lock(&priv->conf_mutex);
+ priv->mode = NL80211_IFTYPE_UNSPECIFIED;
+ priv->softled_state = 0;
+ p54_set_leds(priv);
+
+ cancel_delayed_work_sync(&priv->work);
+
+ priv->stop(dev);
+ skb_queue_purge(&priv->tx_pending);
+ skb_queue_purge(&priv->tx_queue);
+ for (i = 0; i < P54_QUEUE_NUM; i++) {
+ priv->tx_stats[i].count = 0;
+ priv->tx_stats[i].len = 0;
+ }
+
+ priv->beacon_req_id = cpu_to_le32(0);
+ priv->tsf_high32 = priv->tsf_low32 = 0;
+ mutex_unlock(&priv->conf_mutex);
+}
+
+static int p54_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct p54_common *priv = dev->priv;
+
+ mutex_lock(&priv->conf_mutex);
+ if (priv->mode != NL80211_IFTYPE_MONITOR) {
+ mutex_unlock(&priv->conf_mutex);
+ return -EOPNOTSUPP;
+ }
+
+ priv->vif = conf->vif;
+
+ switch (conf->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ priv->mode = conf->type;
+ break;
+ default:
+ mutex_unlock(&priv->conf_mutex);
+ return -EOPNOTSUPP;
+ }
+
+ memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
+ p54_setup_mac(priv);
+ mutex_unlock(&priv->conf_mutex);
+ return 0;
+}
+
+static void p54_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct p54_common *priv = dev->priv;
+
+ mutex_lock(&priv->conf_mutex);
+ priv->vif = NULL;
+
+ /*
+ * LMAC API 3.2.2 states that any active beacon template must be
+ * canceled by the driver before attempting a mode transition.
+ */
+ if (le32_to_cpu(priv->beacon_req_id) != 0) {
+ p54_tx_cancel(priv, priv->beacon_req_id);
+ wait_for_completion_interruptible_timeout(&priv->beacon_comp, HZ);
+ }
+ priv->mode = NL80211_IFTYPE_MONITOR;
+ memset(priv->mac_addr, 0, ETH_ALEN);
+ memset(priv->bssid, 0, ETH_ALEN);
+ p54_setup_mac(priv);
+ mutex_unlock(&priv->conf_mutex);
+}
+
+static int p54_config(struct ieee80211_hw *dev, u32 changed)
+{
+ int ret = 0;
+ struct p54_common *priv = dev->priv;
+ struct ieee80211_conf *conf = &dev->conf;
+
+ mutex_lock(&priv->conf_mutex);
+ if (changed & IEEE80211_CONF_CHANGE_POWER)
+ priv->output_power = conf->power_level << 2;
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ ret = p54_scan(priv, P54_SCAN_EXIT, 0);
+ if (ret)
+ goto out;
+ }
+ if (changed & IEEE80211_CONF_CHANGE_PS) {
+ ret = p54_set_ps(priv);
+ if (ret)
+ goto out;
+ }
+ if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ ret = p54_setup_mac(priv);
+ if (ret)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&priv->conf_mutex);
+ return ret;
+}
+
+static void p54_configure_filter(struct ieee80211_hw *dev,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct p54_common *priv = dev->priv;
+
+ *total_flags &= FIF_PROMISC_IN_BSS |
+ FIF_OTHER_BSS;
+
+ priv->filter_flags = *total_flags;
+
+ if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS))
+ p54_setup_mac(priv);
+}
+
+static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct p54_common *priv = dev->priv;
+ int ret;
+
+ mutex_lock(&priv->conf_mutex);
+ if (queue < dev->queues) {
+ P54_SET_QUEUE(priv->qos_params[queue], params->aifs,
+ params->cw_min, params->cw_max, params->txop);
+ ret = p54_set_edcf(priv);
+ } else
+ ret = -EINVAL;
+ mutex_unlock(&priv->conf_mutex);
+ return ret;
+}
+
+static void p54_work(struct work_struct *work)
+{
+ struct p54_common *priv = container_of(work, struct p54_common,
+ work.work);
+
+ if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+ return ;
+
+ /*
+ * TODO: walk through tx_queue and do the following tasks
+ * 1. initiate bursts.
+ * 2. cancel stuck frames / reset the device if necessary.
+ */
+
+ p54_fetch_statistics(priv);
+}
+
+static int p54_get_stats(struct ieee80211_hw *dev,
+ struct ieee80211_low_level_stats *stats)
+{
+ struct p54_common *priv = dev->priv;
+
+ memcpy(stats, &priv->stats, sizeof(*stats));
+ return 0;
+}
+
+static int p54_get_tx_stats(struct ieee80211_hw *dev,
+ struct ieee80211_tx_queue_stats *stats)
+{
+ struct p54_common *priv = dev->priv;
+
+ memcpy(stats, &priv->tx_stats[P54_QUEUE_DATA],
+ sizeof(stats[0]) * dev->queues);
+ return 0;
+}
+
+static void p54_bss_info_changed(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info,
+ u32 changed)
+{
+ struct p54_common *priv = dev->priv;
+
+ mutex_lock(&priv->conf_mutex);
+ if (changed & BSS_CHANGED_BSSID) {
+ memcpy(priv->bssid, info->bssid, ETH_ALEN);
+ p54_setup_mac(priv);
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ p54_scan(priv, P54_SCAN_EXIT, 0);
+ p54_setup_mac(priv);
+ p54_beacon_update(priv, vif);
+ p54_set_edcf(priv);
+ }
+
+ if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
+ priv->use_short_slot = info->use_short_slot;
+ p54_set_edcf(priv);
+ }
+ if (changed & BSS_CHANGED_BASIC_RATES) {
+ if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+ priv->basic_rate_mask = (info->basic_rates << 4);
+ else
+ priv->basic_rate_mask = info->basic_rates;
+ p54_setup_mac(priv);
+ if (priv->fw_var >= 0x500)
+ p54_scan(priv, P54_SCAN_EXIT, 0);
+ }
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (info->assoc) {
+ priv->aid = info->aid;
+ priv->wakeup_timer = info->beacon_int *
+ info->dtim_period * 5;
+ p54_setup_mac(priv);
+ } else {
+ priv->wakeup_timer = 500;
+ priv->aid = 0;
+ }
+ }
+
+ mutex_unlock(&priv->conf_mutex);
+}
+
+static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct p54_common *priv = dev->priv;
+ int slot, ret = 0;
+ u8 algo = 0;
+ u8 *addr = NULL;
+
+ if (modparam_nohwcrypt)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&priv->conf_mutex);
+ if (cmd == SET_KEY) {
+ switch (key->alg) {
+ case ALG_TKIP:
+ if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
+ BR_DESC_PRIV_CAP_TKIP))) {
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ algo = P54_CRYPTO_TKIPMICHAEL;
+ break;
+ case ALG_WEP:
+ if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ algo = P54_CRYPTO_WEP;
+ break;
+ case ALG_CCMP:
+ if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ algo = P54_CRYPTO_AESCCMP;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+ slot = bitmap_find_free_region(priv->used_rxkeys,
+ priv->rx_keycache_size, 0);
+
+ if (slot < 0) {
+ /*
+ * The device supports the choosen algorithm, but the
+ * firmware does not provide enough key slots to store
+ * all of them.
+ * But encryption offload for outgoing frames is always
+ * possible, so we just pretend that the upload was
+ * successful and do the decryption in software.
+ */
+
+ /* mark the key as invalid. */
+ key->hw_key_idx = 0xff;
+ goto out_unlock;
+ }
+ } else {
+ slot = key->hw_key_idx;
+
+ if (slot == 0xff) {
+ /* This key was not uploaded into the rx key cache. */
+
+ goto out_unlock;
+ }
+
+ bitmap_release_region(priv->used_rxkeys, slot, 0);
+ algo = 0;
+ }
+
+ if (sta)
+ addr = sta->addr;
+
+ ret = p54_upload_key(priv, algo, slot, key->keyidx,
+ key->keylen, addr, key->key);
+ if (ret) {
+ bitmap_release_region(priv->used_rxkeys, slot, 0);
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+
+ key->hw_key_idx = slot;
+
+out_unlock:
+ mutex_unlock(&priv->conf_mutex);
+ return ret;
+}
+
+static const struct ieee80211_ops p54_ops = {
+ .tx = p54_tx_80211,
+ .start = p54_start,
+ .stop = p54_stop,
+ .add_interface = p54_add_interface,
+ .remove_interface = p54_remove_interface,
+ .set_tim = p54_set_tim,
+ .sta_notify = p54_sta_notify,
+ .set_key = p54_set_key,
+ .config = p54_config,
+ .bss_info_changed = p54_bss_info_changed,
+ .configure_filter = p54_configure_filter,
+ .conf_tx = p54_conf_tx,
+ .get_stats = p54_get_stats,
+ .get_tx_stats = p54_get_tx_stats
+};
+
+struct ieee80211_hw *p54_init_common(size_t priv_data_len)
+{
+ struct ieee80211_hw *dev;
+ struct p54_common *priv;
+
+ dev = ieee80211_alloc_hw(priv_data_len, &p54_ops);
+ if (!dev)
+ return NULL;
+
+ priv = dev->priv;
+ priv->hw = dev;
+ priv->mode = NL80211_IFTYPE_UNSPECIFIED;
+ priv->basic_rate_mask = 0x15f;
+ spin_lock_init(&priv->tx_stats_lock);
+ skb_queue_head_init(&priv->tx_queue);
+ skb_queue_head_init(&priv->tx_pending);
+ dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_PS_NULLFUNC_STACK |
+ IEEE80211_HW_BEACON_FILTER |
+ IEEE80211_HW_NOISE_DBM;
+
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ dev->channel_change_time = 1000; /* TODO: find actual value */
+ priv->beacon_req_id = cpu_to_le32(0);
+ priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
+ priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
+ priv->tx_stats[P54_QUEUE_MGMT].limit = 3;
+ priv->tx_stats[P54_QUEUE_CAB].limit = 3;
+ priv->tx_stats[P54_QUEUE_DATA].limit = 5;
+ dev->queues = 1;
+ priv->noise = -94;
+ /*
+ * We support at most 8 tries no matter which rate they're at,
+ * we cannot support max_rates * max_rate_tries as we set it
+ * here, but setting it correctly to 4/2 or so would limit us
+ * artificially if the RC algorithm wants just two rates, so
+ * let's say 4/7, we'll redistribute it at TX time, see the
+ * comments there.
+ */
+ dev->max_rates = 4;
+ dev->max_rate_tries = 7;
+ dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 +
+ sizeof(struct p54_tx_data);
+
+ /*
+ * For now, disable PS by default because it affects
+ * link stability significantly.
+ */
+ dev->wiphy->ps_default = false;
+
+ mutex_init(&priv->conf_mutex);
+ mutex_init(&priv->eeprom_mutex);
+ init_completion(&priv->eeprom_comp);
+ init_completion(&priv->beacon_comp);
+ INIT_DELAYED_WORK(&priv->work, p54_work);
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(p54_init_common);
+
+int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
+{
+ struct p54_common *priv = dev->priv;
+ int err;
+
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ dev_err(pdev, "Cannot register device (%d).\n", err);
+ return err;
+ }
+
+#ifdef CONFIG_P54_LEDS
+ err = p54_init_leds(priv);
+ if (err)
+ return err;
+#endif /* CONFIG_P54_LEDS */
+
+ dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
+ return 0;
+}
+EXPORT_SYMBOL_GPL(p54_register_common);
+
+void p54_free_common(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ unsigned int i;
+
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+ kfree(priv->band_table[i]);
+
+ kfree(priv->iq_autocal);
+ kfree(priv->output_limit);
+ kfree(priv->curve_data);
+ kfree(priv->used_rxkeys);
+ priv->iq_autocal = NULL;
+ priv->output_limit = NULL;
+ priv->curve_data = NULL;
+ priv->used_rxkeys = NULL;
+ ieee80211_free_hw(dev);
+}
+EXPORT_SYMBOL_GPL(p54_free_common);
+
+void p54_unregister_common(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+
+#ifdef CONFIG_P54_LEDS
+ p54_unregister_leds(priv);
+#endif /* CONFIG_P54_LEDS */
+
+ ieee80211_unregister_hw(dev);
+ mutex_destroy(&priv->conf_mutex);
+ mutex_destroy(&priv->eeprom_mutex);
+}
+EXPORT_SYMBOL_GPL(p54_unregister_common);
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index db3df94..1afc394 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -1,6 +1,3 @@
-#ifndef P54_H
-#define P54_H
-
/*
* Shared defines for all mac80211 Prism54 code
*
@@ -14,39 +11,78 @@
* published by the Free Software Foundation.
*/
+#ifndef P54_H
+#define P54_H
+
#ifdef CONFIG_P54_LEDS
#include <linux/leds.h>
#endif /* CONFIG_P54_LEDS */
-enum p54_control_frame_types {
- P54_CONTROL_TYPE_SETUP = 0,
- P54_CONTROL_TYPE_SCAN,
- P54_CONTROL_TYPE_TRAP,
- P54_CONTROL_TYPE_DCFINIT,
- P54_CONTROL_TYPE_RX_KEYCACHE,
- P54_CONTROL_TYPE_TIM,
- P54_CONTROL_TYPE_PSM,
- P54_CONTROL_TYPE_TXCANCEL,
- P54_CONTROL_TYPE_TXDONE,
- P54_CONTROL_TYPE_BURST,
- P54_CONTROL_TYPE_STAT_READBACK,
- P54_CONTROL_TYPE_BBP,
- P54_CONTROL_TYPE_EEPROM_READBACK,
- P54_CONTROL_TYPE_LED,
- P54_CONTROL_TYPE_GPIO,
- P54_CONTROL_TYPE_TIMER,
- P54_CONTROL_TYPE_MODULATION,
- P54_CONTROL_TYPE_SYNTH_CONFIG,
- P54_CONTROL_TYPE_DETECTOR_VALUE,
- P54_CONTROL_TYPE_XBOW_SYNTH_CFG,
- P54_CONTROL_TYPE_CCE_QUIET,
- P54_CONTROL_TYPE_PSM_STA_UNLOCK,
- P54_CONTROL_TYPE_PCS,
- P54_CONTROL_TYPE_BT_BALANCER = 28,
- P54_CONTROL_TYPE_GROUP_ADDRESS_TABLE = 30,
- P54_CONTROL_TYPE_ARPTABLE = 31,
- P54_CONTROL_TYPE_BT_OPTIONS = 35
-};
+#define ISL38XX_DEV_FIRMWARE_ADDR 0x20000
+
+#define BR_CODE_MIN 0x80000000
+#define BR_CODE_COMPONENT_ID 0x80000001
+#define BR_CODE_COMPONENT_VERSION 0x80000002
+#define BR_CODE_DEPENDENT_IF 0x80000003
+#define BR_CODE_EXPOSED_IF 0x80000004
+#define BR_CODE_DESCR 0x80000101
+#define BR_CODE_MAX 0x8FFFFFFF
+#define BR_CODE_END_OF_BRA 0xFF0000FF
+#define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF
+
+struct bootrec {
+ __le32 code;
+ __le32 len;
+ u32 data[10];
+} __packed;
+
+/* Interface role definitions */
+#define BR_INTERFACE_ROLE_SERVER 0x0000
+#define BR_INTERFACE_ROLE_CLIENT 0x8000
+
+#define BR_DESC_PRIV_CAP_WEP BIT(0)
+#define BR_DESC_PRIV_CAP_TKIP BIT(1)
+#define BR_DESC_PRIV_CAP_MICHAEL BIT(2)
+#define BR_DESC_PRIV_CAP_CCX_CP BIT(3)
+#define BR_DESC_PRIV_CAP_CCX_MIC BIT(4)
+#define BR_DESC_PRIV_CAP_AESCCMP BIT(5)
+
+struct bootrec_desc {
+ __le16 modes;
+ __le16 flags;
+ __le32 rx_start;
+ __le32 rx_end;
+ u8 headroom;
+ u8 tailroom;
+ u8 tx_queues;
+ u8 tx_depth;
+ u8 privacy_caps;
+ u8 rx_keycache_size;
+ u8 time_size;
+ u8 padding;
+ u8 rates[16];
+ u8 padding2[4];
+ __le16 rx_mtu;
+} __packed;
+
+#define FW_FMAC 0x464d4143
+#define FW_LM86 0x4c4d3836
+#define FW_LM87 0x4c4d3837
+#define FW_LM20 0x4c4d3230
+
+struct bootrec_comp_id {
+ __le32 fw_variant;
+} __packed;
+
+struct bootrec_comp_ver {
+ char fw_version[24];
+} __packed;
+
+struct bootrec_end {
+ __le16 crc;
+ u8 padding[2];
+ u8 md5[16];
+} __packed;
/* provide 16 bytes for the transport back-end */
#define P54_TX_INFO_DATA_SIZE 16
@@ -55,34 +91,30 @@
struct p54_tx_info {
u32 start_addr;
u32 end_addr;
- void *data[P54_TX_INFO_DATA_SIZE / sizeof(void *)];
+ union {
+ void *data[P54_TX_INFO_DATA_SIZE / sizeof(void *)];
+ struct {
+ u32 extra_len;
+ };
+ };
};
#define P54_MAX_CTRL_FRAME_LEN 0x1000
-#define P54_HDR_FLAG_CONTROL BIT(15)
-#define P54_HDR_FLAG_CONTROL_OPSET (BIT(15) + BIT(0))
-
-struct p54_hdr {
- __le16 flags;
- __le16 len;
- __le32 req_id;
- __le16 type; /* enum p54_control_frame_types */
- u8 rts_tries;
- u8 tries;
- u8 data[0];
-} __attribute__ ((packed));
-
-#define FREE_AFTER_TX(skb) \
- ((((struct p54_hdr *) ((struct sk_buff *) skb)->data)-> \
- flags) == cpu_to_le16(P54_HDR_FLAG_CONTROL_OPSET))
+#define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, _txop) \
+do { \
+ queue.aifs = cpu_to_le16(ai_fs); \
+ queue.cwmin = cpu_to_le16(cw_min); \
+ queue.cwmax = cpu_to_le16(cw_max); \
+ queue.txop = cpu_to_le16(_txop); \
+} while (0)
struct p54_edcf_queue_param {
__le16 aifs;
__le16 cwmin;
__le16 cwmax;
__le16 txop;
-} __attribute__ ((packed));
+} __packed;
struct p54_rssi_linear_approximation {
s16 mul;
@@ -101,13 +133,6 @@
#define EEPROM_READBACK_LEN 0x3fc
-#define ISL38XX_DEV_FIRMWARE_ADDR 0x20000
-
-#define FW_FMAC 0x464d4143
-#define FW_LM86 0x4c4d3836
-#define FW_LM87 0x4c4d3837
-#define FW_LM20 0x4c4d3230
-
enum fw_state {
FW_STATE_OFF,
FW_STATE_BOOTING,
@@ -138,6 +163,7 @@
void (*tx)(struct ieee80211_hw *dev, struct sk_buff *skb);
int (*open)(struct ieee80211_hw *dev);
void (*stop)(struct ieee80211_hw *dev);
+ struct sk_buff_head tx_pending;
struct sk_buff_head tx_queue;
struct mutex conf_mutex;
@@ -156,6 +182,7 @@
/* (e)DCF / QOS state */
bool use_short_slot;
+ spinlock_t tx_stats_lock;
struct ieee80211_tx_queue_stats tx_stats[8];
struct p54_edcf_queue_param qos_params[8];
@@ -171,6 +198,7 @@
struct p54_cal_database *curve_data;
struct p54_cal_database *output_limit;
struct p54_rssi_linear_approximation rssical_db[IEEE80211_NUM_BANDS];
+ struct ieee80211_supported_band *band_table[IEEE80211_NUM_BANDS];
/* BBP/MAC state */
u8 mac_addr[ETH_ALEN];
@@ -181,7 +209,9 @@
u32 tsf_low32, tsf_high32;
u32 basic_rate_mask;
u16 aid;
- struct sk_buff *cached_beacon;
+ bool powersave_override;
+ __le32 beacon_req_id;
+ struct completion beacon_comp;
/* cryptographic engine information */
u8 privacy_caps;
@@ -202,15 +232,20 @@
/* eeprom handling */
void *eeprom;
struct completion eeprom_comp;
+ struct mutex eeprom_mutex;
};
+/* interfaces for the drivers */
int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb);
int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw);
int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len);
int p54_read_eeprom(struct ieee80211_hw *dev);
+
struct ieee80211_hw *p54_init_common(size_t priv_data_len);
int p54_register_common(struct ieee80211_hw *dev, struct device *pdev);
void p54_free_common(struct ieee80211_hw *dev);
+void p54_unregister_common(struct ieee80211_hw *dev);
+
#endif /* P54_H */
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
deleted file mode 100644
index 22ca122..0000000
--- a/drivers/net/wireless/p54/p54common.c
+++ /dev/null
@@ -1,2688 +0,0 @@
-/*
- * Common code for mac80211 Prism54 drivers
- *
- * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
- * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de>
- * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
- *
- * Based on:
- * - the islsm (softmac prism54) driver, which is:
- * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
- * - stlc45xx driver
- * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-
-#include <net/mac80211.h>
-#ifdef CONFIG_P54_LEDS
-#include <linux/leds.h>
-#endif /* CONFIG_P54_LEDS */
-
-#include "p54.h"
-#include "p54common.h"
-
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
-MODULE_DESCRIPTION("Softmac Prism54 common code");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("prism54common");
-
-static struct ieee80211_rate p54_bgrates[] = {
- { .bitrate = 10, .hw_value = 0, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 60, .hw_value = 4, },
- { .bitrate = 90, .hw_value = 5, },
- { .bitrate = 120, .hw_value = 6, },
- { .bitrate = 180, .hw_value = 7, },
- { .bitrate = 240, .hw_value = 8, },
- { .bitrate = 360, .hw_value = 9, },
- { .bitrate = 480, .hw_value = 10, },
- { .bitrate = 540, .hw_value = 11, },
-};
-
-static struct ieee80211_channel p54_bgchannels[] = {
- { .center_freq = 2412, .hw_value = 1, },
- { .center_freq = 2417, .hw_value = 2, },
- { .center_freq = 2422, .hw_value = 3, },
- { .center_freq = 2427, .hw_value = 4, },
- { .center_freq = 2432, .hw_value = 5, },
- { .center_freq = 2437, .hw_value = 6, },
- { .center_freq = 2442, .hw_value = 7, },
- { .center_freq = 2447, .hw_value = 8, },
- { .center_freq = 2452, .hw_value = 9, },
- { .center_freq = 2457, .hw_value = 10, },
- { .center_freq = 2462, .hw_value = 11, },
- { .center_freq = 2467, .hw_value = 12, },
- { .center_freq = 2472, .hw_value = 13, },
- { .center_freq = 2484, .hw_value = 14, },
-};
-
-static struct ieee80211_supported_band band_2GHz = {
- .channels = p54_bgchannels,
- .n_channels = ARRAY_SIZE(p54_bgchannels),
- .bitrates = p54_bgrates,
- .n_bitrates = ARRAY_SIZE(p54_bgrates),
-};
-
-static struct ieee80211_rate p54_arates[] = {
- { .bitrate = 60, .hw_value = 4, },
- { .bitrate = 90, .hw_value = 5, },
- { .bitrate = 120, .hw_value = 6, },
- { .bitrate = 180, .hw_value = 7, },
- { .bitrate = 240, .hw_value = 8, },
- { .bitrate = 360, .hw_value = 9, },
- { .bitrate = 480, .hw_value = 10, },
- { .bitrate = 540, .hw_value = 11, },
-};
-
-static struct ieee80211_channel p54_achannels[] = {
- { .center_freq = 4920 },
- { .center_freq = 4940 },
- { .center_freq = 4960 },
- { .center_freq = 4980 },
- { .center_freq = 5040 },
- { .center_freq = 5060 },
- { .center_freq = 5080 },
- { .center_freq = 5170 },
- { .center_freq = 5180 },
- { .center_freq = 5190 },
- { .center_freq = 5200 },
- { .center_freq = 5210 },
- { .center_freq = 5220 },
- { .center_freq = 5230 },
- { .center_freq = 5240 },
- { .center_freq = 5260 },
- { .center_freq = 5280 },
- { .center_freq = 5300 },
- { .center_freq = 5320 },
- { .center_freq = 5500 },
- { .center_freq = 5520 },
- { .center_freq = 5540 },
- { .center_freq = 5560 },
- { .center_freq = 5580 },
- { .center_freq = 5600 },
- { .center_freq = 5620 },
- { .center_freq = 5640 },
- { .center_freq = 5660 },
- { .center_freq = 5680 },
- { .center_freq = 5700 },
- { .center_freq = 5745 },
- { .center_freq = 5765 },
- { .center_freq = 5785 },
- { .center_freq = 5805 },
- { .center_freq = 5825 },
-};
-
-static struct ieee80211_supported_band band_5GHz = {
- .channels = p54_achannels,
- .n_channels = ARRAY_SIZE(p54_achannels),
- .bitrates = p54_arates,
- .n_bitrates = ARRAY_SIZE(p54_arates),
-};
-
-int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
-{
- struct p54_common *priv = dev->priv;
- struct bootrec_exp_if *exp_if;
- struct bootrec *bootrec;
- u32 *data = (u32 *)fw->data;
- u32 *end_data = (u32 *)fw->data + (fw->size >> 2);
- u8 *fw_version = NULL;
- size_t len;
- int i;
- int maxlen;
-
- if (priv->rx_start)
- return 0;
-
- while (data < end_data && *data)
- data++;
-
- while (data < end_data && !*data)
- data++;
-
- bootrec = (struct bootrec *) data;
-
- while (bootrec->data <= end_data &&
- (bootrec->data + (len = le32_to_cpu(bootrec->len))) <= end_data) {
- u32 code = le32_to_cpu(bootrec->code);
- switch (code) {
- case BR_CODE_COMPONENT_ID:
- priv->fw_interface = be32_to_cpup((__be32 *)
- bootrec->data);
- switch (priv->fw_interface) {
- case FW_LM86:
- case FW_LM20:
- case FW_LM87: {
- char *iftype = (char *)bootrec->data;
- printk(KERN_INFO "%s: p54 detected a LM%c%c "
- "firmware\n",
- wiphy_name(dev->wiphy),
- iftype[2], iftype[3]);
- break;
- }
- case FW_FMAC:
- default:
- printk(KERN_ERR "%s: unsupported firmware\n",
- wiphy_name(dev->wiphy));
- return -ENODEV;
- }
- break;
- case BR_CODE_COMPONENT_VERSION:
- /* 24 bytes should be enough for all firmwares */
- if (strnlen((unsigned char*)bootrec->data, 24) < 24)
- fw_version = (unsigned char*)bootrec->data;
- break;
- case BR_CODE_DESCR: {
- struct bootrec_desc *desc =
- (struct bootrec_desc *)bootrec->data;
- priv->rx_start = le32_to_cpu(desc->rx_start);
- /* FIXME add sanity checking */
- priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500;
- priv->headroom = desc->headroom;
- priv->tailroom = desc->tailroom;
- priv->privacy_caps = desc->privacy_caps;
- priv->rx_keycache_size = desc->rx_keycache_size;
- if (le32_to_cpu(bootrec->len) == 11)
- priv->rx_mtu = le16_to_cpu(desc->rx_mtu);
- else
- priv->rx_mtu = (size_t)
- 0x620 - priv->tx_hdr_len;
- maxlen = priv->tx_hdr_len + /* USB devices */
- sizeof(struct p54_rx_data) +
- 4 + /* rx alignment */
- IEEE80211_MAX_FRAG_THRESHOLD;
- if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) {
- printk(KERN_INFO "p54: rx_mtu reduced from %d "
- "to %d\n", priv->rx_mtu,
- maxlen);
- priv->rx_mtu = maxlen;
- }
- break;
- }
- case BR_CODE_EXPOSED_IF:
- exp_if = (struct bootrec_exp_if *) bootrec->data;
- for (i = 0; i < (len * sizeof(*exp_if) / 4); i++)
- if (exp_if[i].if_id == cpu_to_le16(0x1a))
- priv->fw_var = le16_to_cpu(exp_if[i].variant);
- break;
- case BR_CODE_DEPENDENT_IF:
- break;
- case BR_CODE_END_OF_BRA:
- case LEGACY_BR_CODE_END_OF_BRA:
- end_data = NULL;
- break;
- default:
- break;
- }
- bootrec = (struct bootrec *)&bootrec->data[len];
- }
-
- if (fw_version)
- printk(KERN_INFO "%s: FW rev %s - Softmac protocol %x.%x\n",
- wiphy_name(dev->wiphy), fw_version,
- priv->fw_var >> 8, priv->fw_var & 0xff);
-
- if (priv->fw_var < 0x500)
- printk(KERN_INFO "%s: you are using an obsolete firmware. "
- "visit http://wireless.kernel.org/en/users/Drivers/p54 "
- "and grab one for \"kernel >= 2.6.28\"!\n",
- wiphy_name(dev->wiphy));
-
- if (priv->fw_var >= 0x300) {
- /* Firmware supports QoS, use it! */
- priv->tx_stats[P54_QUEUE_AC_VO].limit = 3;
- priv->tx_stats[P54_QUEUE_AC_VI].limit = 4;
- priv->tx_stats[P54_QUEUE_AC_BE].limit = 3;
- priv->tx_stats[P54_QUEUE_AC_BK].limit = 2;
- dev->queues = P54_QUEUE_AC_NUM;
- }
-
- if (!modparam_nohwcrypt) {
- printk(KERN_INFO "%s: cryptographic accelerator "
- "WEP:%s, TKIP:%s, CCMP:%s\n",
- wiphy_name(dev->wiphy),
- (priv->privacy_caps & BR_DESC_PRIV_CAP_WEP) ? "YES" :
- "no", (priv->privacy_caps & (BR_DESC_PRIV_CAP_TKIP |
- BR_DESC_PRIV_CAP_MICHAEL)) ? "YES" : "no",
- (priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP) ?
- "YES" : "no");
-
- if (priv->rx_keycache_size) {
- /*
- * NOTE:
- *
- * The firmware provides at most 255 (0 - 254) slots
- * for keys which are then used to offload decryption.
- * As a result the 255 entry (aka 0xff) can be used
- * safely by the driver to mark keys that didn't fit
- * into the full cache. This trick saves us from
- * keeping a extra list for uploaded keys.
- */
-
- priv->used_rxkeys = kzalloc(BITS_TO_LONGS(
- priv->rx_keycache_size), GFP_KERNEL);
-
- if (!priv->used_rxkeys)
- return -ENOMEM;
- }
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(p54_parse_firmware);
-
-static int p54_convert_rev0(struct ieee80211_hw *dev,
- struct pda_pa_curve_data *curve_data)
-{
- struct p54_common *priv = dev->priv;
- struct p54_pa_curve_data_sample *dst;
- struct pda_pa_curve_data_sample_rev0 *src;
- size_t cd_len = sizeof(*curve_data) +
- (curve_data->points_per_channel*sizeof(*dst) + 2) *
- curve_data->channels;
- unsigned int i, j;
- void *source, *target;
-
- priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len,
- GFP_KERNEL);
- if (!priv->curve_data)
- return -ENOMEM;
-
- priv->curve_data->entries = curve_data->channels;
- priv->curve_data->entry_size = sizeof(__le16) +
- sizeof(*dst) * curve_data->points_per_channel;
- priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
- priv->curve_data->len = cd_len;
- memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
- source = curve_data->data;
- target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
- for (i = 0; i < curve_data->channels; i++) {
- __le16 *freq = source;
- source += sizeof(__le16);
- *((__le16 *)target) = *freq;
- target += sizeof(__le16);
- for (j = 0; j < curve_data->points_per_channel; j++) {
- dst = target;
- src = source;
-
- dst->rf_power = src->rf_power;
- dst->pa_detector = src->pa_detector;
- dst->data_64qam = src->pcv;
- /* "invent" the points for the other modulations */
-#define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y)
- dst->data_16qam = SUB(src->pcv, 12);
- dst->data_qpsk = SUB(dst->data_16qam, 12);
- dst->data_bpsk = SUB(dst->data_qpsk, 12);
- dst->data_barker = SUB(dst->data_bpsk, 14);
-#undef SUB
- target += sizeof(*dst);
- source += sizeof(*src);
- }
- }
-
- return 0;
-}
-
-static int p54_convert_rev1(struct ieee80211_hw *dev,
- struct pda_pa_curve_data *curve_data)
-{
- struct p54_common *priv = dev->priv;
- struct p54_pa_curve_data_sample *dst;
- struct pda_pa_curve_data_sample_rev1 *src;
- size_t cd_len = sizeof(*curve_data) +
- (curve_data->points_per_channel*sizeof(*dst) + 2) *
- curve_data->channels;
- unsigned int i, j;
- void *source, *target;
-
- priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data),
- GFP_KERNEL);
- if (!priv->curve_data)
- return -ENOMEM;
-
- priv->curve_data->entries = curve_data->channels;
- priv->curve_data->entry_size = sizeof(__le16) +
- sizeof(*dst) * curve_data->points_per_channel;
- priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
- priv->curve_data->len = cd_len;
- memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
- source = curve_data->data;
- target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
- for (i = 0; i < curve_data->channels; i++) {
- __le16 *freq = source;
- source += sizeof(__le16);
- *((__le16 *)target) = *freq;
- target += sizeof(__le16);
- for (j = 0; j < curve_data->points_per_channel; j++) {
- memcpy(target, source, sizeof(*src));
-
- target += sizeof(*dst);
- source += sizeof(*src);
- }
- source++;
- }
-
- return 0;
-}
-
-static const char *p54_rf_chips[] = { "NULL", "Duette3", "Duette2",
- "Frisbee", "Xbow", "Longbow", "NULL", "NULL" };
-static int p54_init_xbow_synth(struct ieee80211_hw *dev);
-
-static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len,
- u16 type)
-{
- struct p54_common *priv = dev->priv;
- int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0;
- int entry_size = sizeof(struct pda_rssi_cal_entry) + offset;
- int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
- int i;
-
- if (len != (entry_size * num_entries)) {
- printk(KERN_ERR "%s: unknown rssi calibration data packing "
- " type:(%x) len:%d.\n",
- wiphy_name(dev->wiphy), type, len);
-
- print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
- data, len);
-
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
- return;
- }
-
- for (i = 0; i < num_entries; i++) {
- struct pda_rssi_cal_entry *cal = data +
- (offset + i * entry_size);
- priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul);
- priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add);
- }
-}
-
-static void p54_parse_default_country(struct ieee80211_hw *dev,
- void *data, int len)
-{
- struct pda_country *country;
-
- if (len != sizeof(*country)) {
- printk(KERN_ERR "%s: found possible invalid default country "
- "eeprom entry. (entry size: %d)\n",
- wiphy_name(dev->wiphy), len);
-
- print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
- data, len);
-
- printk(KERN_ERR "%s: please report this issue.\n",
- wiphy_name(dev->wiphy));
- return;
- }
-
- country = (struct pda_country *) data;
- if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO)
- regulatory_hint(dev->wiphy, country->alpha2);
- else {
- /* TODO:
- * write a shared/common function that converts
- * "Regulatory domain codes" (802.11-2007 14.8.2.2)
- * into ISO/IEC 3166-1 alpha2 for regulatory_hint.
- */
- }
-}
-
-static int p54_convert_output_limits(struct ieee80211_hw *dev,
- u8 *data, size_t len)
-{
- struct p54_common *priv = dev->priv;
-
- if (len < 2)
- return -EINVAL;
-
- if (data[0] != 0) {
- printk(KERN_ERR "%s: unknown output power db revision:%x\n",
- wiphy_name(dev->wiphy), data[0]);
- return -EINVAL;
- }
-
- if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len)
- return -EINVAL;
-
- priv->output_limit = kmalloc(data[1] *
- sizeof(struct pda_channel_output_limit) +
- sizeof(*priv->output_limit), GFP_KERNEL);
-
- if (!priv->output_limit)
- return -ENOMEM;
-
- priv->output_limit->offset = 0;
- priv->output_limit->entries = data[1];
- priv->output_limit->entry_size =
- sizeof(struct pda_channel_output_limit);
- priv->output_limit->len = priv->output_limit->entry_size *
- priv->output_limit->entries +
- priv->output_limit->offset;
-
- memcpy(priv->output_limit->data, &data[2],
- data[1] * sizeof(struct pda_channel_output_limit));
-
- return 0;
-}
-
-static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src,
- size_t total_len)
-{
- struct p54_cal_database *dst;
- size_t payload_len, entries, entry_size, offset;
-
- payload_len = le16_to_cpu(src->len);
- entries = le16_to_cpu(src->entries);
- entry_size = le16_to_cpu(src->entry_size);
- offset = le16_to_cpu(src->offset);
- if (((entries * entry_size + offset) != payload_len) ||
- (payload_len + sizeof(*src) != total_len))
- return NULL;
-
- dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL);
- if (!dst)
- return NULL;
-
- dst->entries = entries;
- dst->entry_size = entry_size;
- dst->offset = offset;
- dst->len = payload_len;
-
- memcpy(dst->data, src->data, payload_len);
- return dst;
-}
-
-int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
-{
- struct p54_common *priv = dev->priv;
- struct eeprom_pda_wrap *wrap = NULL;
- struct pda_entry *entry;
- unsigned int data_len, entry_len;
- void *tmp;
- int err;
- u8 *end = (u8 *)eeprom + len;
- u16 synth = 0;
-
- wrap = (struct eeprom_pda_wrap *) eeprom;
- entry = (void *)wrap->data + le16_to_cpu(wrap->len);
-
- /* verify that at least the entry length/code fits */
- while ((u8 *)entry <= end - sizeof(*entry)) {
- entry_len = le16_to_cpu(entry->len);
- data_len = ((entry_len - 1) << 1);
-
- /* abort if entry exceeds whole structure */
- if ((u8 *)entry + sizeof(*entry) + data_len > end)
- break;
-
- switch (le16_to_cpu(entry->code)) {
- case PDR_MAC_ADDRESS:
- if (data_len != ETH_ALEN)
- break;
- SET_IEEE80211_PERM_ADDR(dev, entry->data);
- break;
- case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS:
- if (priv->output_limit)
- break;
- err = p54_convert_output_limits(dev, entry->data,
- data_len);
- if (err)
- goto err;
- break;
- case PDR_PRISM_PA_CAL_CURVE_DATA: {
- struct pda_pa_curve_data *curve_data =
- (struct pda_pa_curve_data *)entry->data;
- if (data_len < sizeof(*curve_data)) {
- err = -EINVAL;
- goto err;
- }
-
- switch (curve_data->cal_method_rev) {
- case 0:
- err = p54_convert_rev0(dev, curve_data);
- break;
- case 1:
- err = p54_convert_rev1(dev, curve_data);
- break;
- default:
- printk(KERN_ERR "%s: unknown curve data "
- "revision %d\n",
- wiphy_name(dev->wiphy),
- curve_data->cal_method_rev);
- err = -ENODEV;
- break;
- }
- if (err)
- goto err;
- }
- break;
- case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
- priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
- if (!priv->iq_autocal) {
- err = -ENOMEM;
- goto err;
- }
-
- memcpy(priv->iq_autocal, entry->data, data_len);
- priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
- break;
- case PDR_DEFAULT_COUNTRY:
- p54_parse_default_country(dev, entry->data, data_len);
- break;
- case PDR_INTERFACE_LIST:
- tmp = entry->data;
- while ((u8 *)tmp < entry->data + data_len) {
- struct bootrec_exp_if *exp_if = tmp;
- if (le16_to_cpu(exp_if->if_id) == 0xf)
- synth = le16_to_cpu(exp_if->variant);
- tmp += sizeof(struct bootrec_exp_if);
- }
- break;
- case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
- if (data_len < 2)
- break;
- priv->version = *(u8 *)(entry->data + 1);
- break;
- case PDR_RSSI_LINEAR_APPROXIMATION:
- case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
- case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
- p54_parse_rssical(dev, entry->data, data_len,
- le16_to_cpu(entry->code));
- break;
- case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: {
- __le16 *src = (void *) entry->data;
- s16 *dst = (void *) &priv->rssical_db;
- int i;
-
- if (data_len != sizeof(priv->rssical_db)) {
- err = -EINVAL;
- goto err;
- }
- for (i = 0; i < sizeof(priv->rssical_db) /
- sizeof(*src); i++)
- *(dst++) = (s16) le16_to_cpu(*(src++));
- }
- break;
- case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
- struct pda_custom_wrapper *pda = (void *) entry->data;
- if (priv->output_limit || data_len < sizeof(*pda))
- break;
- priv->output_limit = p54_convert_db(pda, data_len);
- }
- break;
- case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: {
- struct pda_custom_wrapper *pda = (void *) entry->data;
- if (priv->curve_data || data_len < sizeof(*pda))
- break;
- priv->curve_data = p54_convert_db(pda, data_len);
- }
- break;
- case PDR_END:
- /* make it overrun */
- entry_len = len;
- break;
- case PDR_MANUFACTURING_PART_NUMBER:
- case PDR_PDA_VERSION:
- case PDR_NIC_SERIAL_NUMBER:
- case PDR_REGULATORY_DOMAIN_LIST:
- case PDR_TEMPERATURE_TYPE:
- case PDR_PRISM_PCI_IDENTIFIER:
- case PDR_COUNTRY_INFORMATION:
- case PDR_OEM_NAME:
- case PDR_PRODUCT_NAME:
- case PDR_UTF8_OEM_NAME:
- case PDR_UTF8_PRODUCT_NAME:
- case PDR_COUNTRY_LIST:
- case PDR_ANTENNA_GAIN:
- case PDR_PRISM_INDIGO_PA_CALIBRATION_DATA:
- case PDR_REGULATORY_POWER_LIMITS:
- case PDR_RADIATED_TRANSMISSION_CORRECTION:
- case PDR_PRISM_TX_IQ_CALIBRATION:
- case PDR_BASEBAND_REGISTERS:
- case PDR_PER_CHANNEL_BASEBAND_REGISTERS:
- break;
- default:
- printk(KERN_INFO "%s: unknown eeprom code : 0x%x\n",
- wiphy_name(dev->wiphy),
- le16_to_cpu(entry->code));
- break;
- }
-
- entry = (void *)entry + (entry_len + 1)*2;
- }
-
- if (!synth || !priv->iq_autocal || !priv->output_limit ||
- !priv->curve_data) {
- printk(KERN_ERR "%s: not all required entries found in eeprom!\n",
- wiphy_name(dev->wiphy));
- err = -EINVAL;
- goto err;
- }
-
- priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
- if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW)
- p54_init_xbow_synth(dev);
- if (!(synth & PDR_SYNTH_24_GHZ_DISABLED))
- dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
- if (!(synth & PDR_SYNTH_5_GHZ_DISABLED))
- dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz;
- if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED)
- priv->rx_diversity_mask = 3;
- if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED)
- priv->tx_diversity_mask = 3;
-
- if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
- u8 perm_addr[ETH_ALEN];
-
- printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
- wiphy_name(dev->wiphy));
- random_ether_addr(perm_addr);
- SET_IEEE80211_PERM_ADDR(dev, perm_addr);
- }
-
- printk(KERN_INFO "%s: hwaddr %pM, MAC:isl38%02x RF:%s\n",
- wiphy_name(dev->wiphy),
- dev->wiphy->perm_addr,
- priv->version, p54_rf_chips[priv->rxhw]);
-
- return 0;
-
- err:
- if (priv->iq_autocal) {
- kfree(priv->iq_autocal);
- priv->iq_autocal = NULL;
- }
-
- if (priv->output_limit) {
- kfree(priv->output_limit);
- priv->output_limit = NULL;
- }
-
- if (priv->curve_data) {
- kfree(priv->curve_data);
- priv->curve_data = NULL;
- }
-
- printk(KERN_ERR "%s: eeprom parse failed!\n",
- wiphy_name(dev->wiphy));
- return err;
-}
-EXPORT_SYMBOL_GPL(p54_parse_eeprom);
-
-static int p54_rssi_to_dbm(struct ieee80211_hw *dev, int rssi)
-{
- struct p54_common *priv = dev->priv;
- int band = dev->conf.channel->band;
-
- if (priv->rxhw != PDR_SYNTH_FRONTEND_LONGBOW)
- return ((rssi * priv->rssical_db[band].mul) / 64 +
- priv->rssical_db[band].add) / 4;
- else
- /*
- * TODO: find the correct formula
- */
- return ((rssi * priv->rssical_db[band].mul) / 64 +
- priv->rssical_db[band].add) / 4;
-}
-
-static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54_common *priv = dev->priv;
- struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data;
- struct ieee80211_rx_status rx_status = {0};
- u16 freq = le16_to_cpu(hdr->freq);
- size_t header_len = sizeof(*hdr);
- u32 tsf32;
- u8 rate = hdr->rate & 0xf;
-
- /*
- * If the device is in a unspecified state we have to
- * ignore all data frames. Else we could end up with a
- * nasty crash.
- */
- if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
- return 0;
-
- if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD))) {
- return 0;
- }
-
- if (hdr->decrypt_status == P54_DECRYPT_OK)
- rx_status.flag |= RX_FLAG_DECRYPTED;
- if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) ||
- (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP))
- rx_status.flag |= RX_FLAG_MMIC_ERROR;
-
- rx_status.signal = p54_rssi_to_dbm(dev, hdr->rssi);
- rx_status.noise = priv->noise;
- if (hdr->rate & 0x10)
- rx_status.flag |= RX_FLAG_SHORTPRE;
- if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
- rx_status.rate_idx = (rate < 4) ? 0 : rate - 4;
- else
- rx_status.rate_idx = rate;
-
- rx_status.freq = freq;
- rx_status.band = dev->conf.channel->band;
- rx_status.antenna = hdr->antenna;
-
- tsf32 = le32_to_cpu(hdr->tsf32);
- if (tsf32 < priv->tsf_low32)
- priv->tsf_high32++;
- rx_status.mactime = ((u64)priv->tsf_high32) << 32 | tsf32;
- priv->tsf_low32 = tsf32;
-
- rx_status.flag |= RX_FLAG_TSFT;
-
- if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
- header_len += hdr->align[0];
-
- skb_pull(skb, header_len);
- skb_trim(skb, le16_to_cpu(hdr->len));
-
- ieee80211_rx_irqsafe(dev, skb, &rx_status);
-
- queue_delayed_work(dev->workqueue, &priv->work,
- msecs_to_jiffies(P54_STATISTICS_UPDATE));
-
- return -1;
-}
-
-static void inline p54_wake_free_queues(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- int i;
-
- if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
- return ;
-
- for (i = 0; i < dev->queues; i++)
- if (priv->tx_stats[i + P54_QUEUE_DATA].len <
- priv->tx_stats[i + P54_QUEUE_DATA].limit)
- ieee80211_wake_queue(dev, i);
-}
-
-void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54_common *priv = dev->priv;
- struct ieee80211_tx_info *info;
- struct p54_tx_info *range;
- unsigned long flags;
-
- if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
- return;
-
- /*
- * don't try to free an already unlinked skb
- */
- if (unlikely((!skb->next) || (!skb->prev)))
- return;
-
- spin_lock_irqsave(&priv->tx_queue.lock, flags);
- info = IEEE80211_SKB_CB(skb);
- range = (void *)info->rate_driver_data;
- if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
- struct ieee80211_tx_info *ni;
- struct p54_tx_info *mr;
-
- ni = IEEE80211_SKB_CB(skb->prev);
- mr = (struct p54_tx_info *)ni->rate_driver_data;
- }
- if (skb->next != (struct sk_buff *)&priv->tx_queue) {
- struct ieee80211_tx_info *ni;
- struct p54_tx_info *mr;
-
- ni = IEEE80211_SKB_CB(skb->next);
- mr = (struct p54_tx_info *)ni->rate_driver_data;
- }
- __skb_unlink(skb, &priv->tx_queue);
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
- dev_kfree_skb_any(skb);
- p54_wake_free_queues(dev);
-}
-EXPORT_SYMBOL_GPL(p54_free_skb);
-
-static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
- __le32 req_id)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *entry;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->tx_queue.lock, flags);
- entry = priv->tx_queue.next;
- while (entry != (struct sk_buff *)&priv->tx_queue) {
- struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
-
- if (hdr->req_id == req_id) {
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
- return entry;
- }
- entry = entry->next;
- }
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
- return NULL;
-}
-
-static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54_common *priv = dev->priv;
- struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
- struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
- struct sk_buff *entry;
- u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
- struct p54_tx_info *range = NULL;
- unsigned long flags;
- int count, idx;
-
- spin_lock_irqsave(&priv->tx_queue.lock, flags);
- entry = (struct sk_buff *) priv->tx_queue.next;
- while (entry != (struct sk_buff *)&priv->tx_queue) {
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
- struct p54_hdr *entry_hdr;
- struct p54_tx_data *entry_data;
- unsigned int pad = 0, frame_len;
-
- range = (void *)info->rate_driver_data;
- if (range->start_addr != addr) {
- entry = entry->next;
- continue;
- }
-
- if (entry->next != (struct sk_buff *)&priv->tx_queue) {
- struct ieee80211_tx_info *ni;
- struct p54_tx_info *mr;
-
- ni = IEEE80211_SKB_CB(entry->next);
- mr = (struct p54_tx_info *)ni->rate_driver_data;
- }
-
- __skb_unlink(entry, &priv->tx_queue);
-
- frame_len = entry->len;
- entry_hdr = (struct p54_hdr *) entry->data;
- entry_data = (struct p54_tx_data *) entry_hdr->data;
- if (priv->tx_stats[entry_data->hw_queue].len)
- priv->tx_stats[entry_data->hw_queue].len--;
- priv->stats.dot11ACKFailureCount += payload->tries - 1;
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
-
- /*
- * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
- * generated by the driver. Therefore tx_status is bogus
- * and we don't want to confuse the mac80211 stack.
- */
- if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) {
- if (entry_data->hw_queue == P54_QUEUE_BEACON)
- priv->cached_beacon = NULL;
-
- kfree_skb(entry);
- goto out;
- }
-
- /*
- * Clear manually, ieee80211_tx_info_clear_status would
- * clear the counts too and we need them.
- */
- memset(&info->status.ampdu_ack_len, 0,
- sizeof(struct ieee80211_tx_info) -
- offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
- BUILD_BUG_ON(offsetof(struct ieee80211_tx_info,
- status.ampdu_ack_len) != 23);
-
- if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
- pad = entry_data->align[0];
-
- /* walk through the rates array and adjust the counts */
- count = payload->tries;
- for (idx = 0; idx < 4; idx++) {
- if (count >= info->status.rates[idx].count) {
- count -= info->status.rates[idx].count;
- } else if (count > 0) {
- info->status.rates[idx].count = count;
- count = 0;
- } else {
- info->status.rates[idx].idx = -1;
- info->status.rates[idx].count = 0;
- }
- }
-
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (!payload->status))
- info->flags |= IEEE80211_TX_STAT_ACK;
- if (payload->status & P54_TX_PSM_CANCELLED)
- info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
- info->status.ack_signal = p54_rssi_to_dbm(dev,
- (int)payload->ack_rssi);
-
- /* Undo all changes to the frame. */
- switch (entry_data->key_type) {
- case P54_CRYPTO_TKIPMICHAEL: {
- u8 *iv = (u8 *)(entry_data->align + pad +
- entry_data->crypt_offset);
-
- /* Restore the original TKIP IV. */
- iv[2] = iv[0];
- iv[0] = iv[1];
- iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */
-
- frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
- break;
- }
- case P54_CRYPTO_AESCCMP:
- frame_len -= 8; /* remove CCMP_MIC */
- break;
- case P54_CRYPTO_WEP:
- frame_len -= 4; /* remove WEP_ICV */
- break;
- }
- skb_trim(entry, frame_len);
- skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
- ieee80211_tx_status_irqsafe(dev, entry);
- goto out;
- }
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
-
-out:
- p54_wake_free_queues(dev);
-}
-
-static void p54_rx_eeprom_readback(struct ieee80211_hw *dev,
- struct sk_buff *skb)
-{
- struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
- struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data;
- struct p54_common *priv = dev->priv;
-
- if (!priv->eeprom)
- return ;
-
- if (priv->fw_var >= 0x509) {
- memcpy(priv->eeprom, eeprom->v2.data,
- le16_to_cpu(eeprom->v2.len));
- } else {
- memcpy(priv->eeprom, eeprom->v1.data,
- le16_to_cpu(eeprom->v1.len));
- }
-
- complete(&priv->eeprom_comp);
-}
-
-static void p54_rx_stats(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54_common *priv = dev->priv;
- struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
- struct p54_statistics *stats = (struct p54_statistics *) hdr->data;
- u32 tsf32;
-
- if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
- return ;
-
- tsf32 = le32_to_cpu(stats->tsf32);
- if (tsf32 < priv->tsf_low32)
- priv->tsf_high32++;
- priv->tsf_low32 = tsf32;
-
- priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail);
- priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success);
- priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs);
-
- priv->noise = p54_rssi_to_dbm(dev, le32_to_cpu(stats->noise));
-
- p54_free_skb(dev, p54_find_tx_entry(dev, hdr->req_id));
-}
-
-static void p54_rx_trap(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54_common *priv = dev->priv;
- struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
- struct p54_trap *trap = (struct p54_trap *) hdr->data;
- u16 event = le16_to_cpu(trap->event);
- u16 freq = le16_to_cpu(trap->frequency);
-
- switch (event) {
- case P54_TRAP_BEACON_TX:
- break;
- case P54_TRAP_RADAR:
- printk(KERN_INFO "%s: radar (freq:%d MHz)\n",
- wiphy_name(dev->wiphy), freq);
- break;
- case P54_TRAP_NO_BEACON:
- if (priv->vif)
- ieee80211_beacon_loss(priv->vif);
- break;
- case P54_TRAP_SCAN:
- break;
- case P54_TRAP_TBTT:
- break;
- case P54_TRAP_TIMER:
- break;
- default:
- printk(KERN_INFO "%s: received event:%x freq:%d\n",
- wiphy_name(dev->wiphy), event, freq);
- break;
- }
-}
-
-static int p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
-
- switch (le16_to_cpu(hdr->type)) {
- case P54_CONTROL_TYPE_TXDONE:
- p54_rx_frame_sent(dev, skb);
- break;
- case P54_CONTROL_TYPE_TRAP:
- p54_rx_trap(dev, skb);
- break;
- case P54_CONTROL_TYPE_BBP:
- break;
- case P54_CONTROL_TYPE_STAT_READBACK:
- p54_rx_stats(dev, skb);
- break;
- case P54_CONTROL_TYPE_EEPROM_READBACK:
- p54_rx_eeprom_readback(dev, skb);
- break;
- default:
- printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
- wiphy_name(dev->wiphy), le16_to_cpu(hdr->type));
- break;
- }
-
- return 0;
-}
-
-/* returns zero if skb can be reused */
-int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- u16 type = le16_to_cpu(*((__le16 *)skb->data));
-
- if (type & P54_HDR_FLAG_CONTROL)
- return p54_rx_control(dev, skb);
- else
- return p54_rx_data(dev, skb);
-}
-EXPORT_SYMBOL_GPL(p54_rx);
-
-/*
- * So, the firmware is somewhat stupid and doesn't know what places in its
- * memory incoming data should go to. By poking around in the firmware, we
- * can find some unused memory to upload our packets to. However, data that we
- * want the card to TX needs to stay intact until the card has told us that
- * it is done with it. This function finds empty places we can upload to and
- * marks allocated areas as reserved if necessary. p54_rx_frame_sent or
- * p54_free_skb frees allocated areas.
- */
-static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
- struct p54_hdr *data, u32 len)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *entry;
- struct sk_buff *target_skb = NULL;
- struct ieee80211_tx_info *info;
- struct p54_tx_info *range;
- u32 last_addr = priv->rx_start;
- u32 largest_hole = 0;
- u32 target_addr = priv->rx_start;
- unsigned long flags;
- unsigned int left;
- len = (len + priv->headroom + priv->tailroom + 3) & ~0x3;
-
- if (!skb)
- return -EINVAL;
-
- spin_lock_irqsave(&priv->tx_queue.lock, flags);
-
- left = skb_queue_len(&priv->tx_queue);
- if (unlikely(left >= 28)) {
- /*
- * The tx_queue is nearly full!
- * We have throttle normal data traffic, because we must
- * have a few spare slots for control frames left.
- */
- ieee80211_stop_queues(dev);
- queue_delayed_work(dev->workqueue, &priv->work,
- msecs_to_jiffies(P54_TX_TIMEOUT));
-
- if (unlikely(left == 32)) {
- /*
- * The tx_queue is now really full.
- *
- * TODO: check if the device has crashed and reset it.
- */
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
- return -ENOSPC;
- }
- }
-
- entry = priv->tx_queue.next;
- while (left--) {
- u32 hole_size;
- info = IEEE80211_SKB_CB(entry);
- range = (void *)info->rate_driver_data;
- hole_size = range->start_addr - last_addr;
- if (!target_skb && hole_size >= len) {
- target_skb = entry->prev;
- hole_size -= len;
- target_addr = last_addr;
- }
- largest_hole = max(largest_hole, hole_size);
- last_addr = range->end_addr;
- entry = entry->next;
- }
- if (!target_skb && priv->rx_end - last_addr >= len) {
- target_skb = priv->tx_queue.prev;
- largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
- if (!skb_queue_empty(&priv->tx_queue)) {
- info = IEEE80211_SKB_CB(target_skb);
- range = (void *)info->rate_driver_data;
- target_addr = range->end_addr;
- }
- } else
- largest_hole = max(largest_hole, priv->rx_end - last_addr);
-
- if (!target_skb) {
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
- ieee80211_stop_queues(dev);
- return -ENOSPC;
- }
-
- info = IEEE80211_SKB_CB(skb);
- range = (void *)info->rate_driver_data;
- range->start_addr = target_addr;
- range->end_addr = target_addr + len;
- __skb_queue_after(&priv->tx_queue, target_skb, skb);
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
-
- if (largest_hole < priv->headroom + sizeof(struct p54_hdr) +
- 48 + IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
- ieee80211_stop_queues(dev);
-
- data->req_id = cpu_to_le32(target_addr + priv->headroom);
- return 0;
-}
-
-static struct sk_buff *p54_alloc_skb(struct ieee80211_hw *dev, u16 hdr_flags,
- u16 payload_len, u16 type, gfp_t memflags)
-{
- struct p54_common *priv = dev->priv;
- struct p54_hdr *hdr;
- struct sk_buff *skb;
- size_t frame_len = sizeof(*hdr) + payload_len;
-
- if (frame_len > P54_MAX_CTRL_FRAME_LEN)
- return NULL;
-
- skb = __dev_alloc_skb(priv->tx_hdr_len + frame_len, memflags);
- if (!skb)
- return NULL;
- skb_reserve(skb, priv->tx_hdr_len);
-
- hdr = (struct p54_hdr *) skb_put(skb, sizeof(*hdr));
- hdr->flags = cpu_to_le16(hdr_flags);
- hdr->len = cpu_to_le16(payload_len);
- hdr->type = cpu_to_le16(type);
- hdr->tries = hdr->rts_tries = 0;
-
- if (p54_assign_address(dev, skb, hdr, frame_len)) {
- kfree_skb(skb);
- return NULL;
- }
- return skb;
-}
-
-int p54_read_eeprom(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct p54_eeprom_lm86 *eeprom_hdr;
- struct sk_buff *skb;
- size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize;
- int ret = -ENOMEM;
- void *eeprom = NULL;
-
- maxblocksize = EEPROM_READBACK_LEN;
- if (priv->fw_var >= 0x509)
- maxblocksize -= 0xc;
- else
- maxblocksize -= 0x4;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL, sizeof(*eeprom_hdr) +
- maxblocksize, P54_CONTROL_TYPE_EEPROM_READBACK,
- GFP_KERNEL);
- if (!skb)
- goto free;
- priv->eeprom = kzalloc(EEPROM_READBACK_LEN, GFP_KERNEL);
- if (!priv->eeprom)
- goto free;
- eeprom = kzalloc(eeprom_size, GFP_KERNEL);
- if (!eeprom)
- goto free;
-
- eeprom_hdr = (struct p54_eeprom_lm86 *) skb_put(skb,
- sizeof(*eeprom_hdr) + maxblocksize);
-
- while (eeprom_size) {
- blocksize = min(eeprom_size, maxblocksize);
- if (priv->fw_var < 0x509) {
- eeprom_hdr->v1.offset = cpu_to_le16(offset);
- eeprom_hdr->v1.len = cpu_to_le16(blocksize);
- } else {
- eeprom_hdr->v2.offset = cpu_to_le32(offset);
- eeprom_hdr->v2.len = cpu_to_le16(blocksize);
- eeprom_hdr->v2.magic2 = 0xf;
- memcpy(eeprom_hdr->v2.magic, (const char *)"LOCK", 4);
- }
- priv->tx(dev, skb);
-
- if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) {
- printk(KERN_ERR "%s: device does not respond!\n",
- wiphy_name(dev->wiphy));
- ret = -EBUSY;
- goto free;
- }
-
- memcpy(eeprom + offset, priv->eeprom, blocksize);
- offset += blocksize;
- eeprom_size -= blocksize;
- }
-
- ret = p54_parse_eeprom(dev, eeprom, offset);
-free:
- kfree(priv->eeprom);
- priv->eeprom = NULL;
- p54_free_skb(dev, skb);
- kfree(eeprom);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(p54_read_eeprom);
-
-static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
- bool set)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_tim *tim;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*tim),
- P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- tim = (struct p54_tim *) skb_put(skb, sizeof(*tim));
- tim->count = 1;
- tim->entry[0] = cpu_to_le16(set ? (sta->aid | 0x8000) : sta->aid);
- priv->tx(dev, skb);
- return 0;
-}
-
-static int p54_sta_unlock(struct ieee80211_hw *dev, u8 *addr)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_sta_unlock *sta;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*sta),
- P54_CONTROL_TYPE_PSM_STA_UNLOCK, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- sta = (struct p54_sta_unlock *)skb_put(skb, sizeof(*sta));
- memcpy(sta->addr, addr, ETH_ALEN);
- priv->tx(dev, skb);
- return 0;
-}
-
-static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
- enum sta_notify_cmd notify_cmd,
- struct ieee80211_sta *sta)
-{
- switch (notify_cmd) {
- case STA_NOTIFY_ADD:
- case STA_NOTIFY_REMOVE:
- /*
- * Notify the firmware that we don't want or we don't
- * need to buffer frames for this station anymore.
- */
-
- p54_sta_unlock(dev, sta->addr);
- break;
- case STA_NOTIFY_AWAKE:
- /* update the firmware's filter table */
- p54_sta_unlock(dev, sta->addr);
- break;
- default:
- break;
- }
-}
-
-static int p54_tx_cancel(struct ieee80211_hw *dev, struct sk_buff *entry)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_hdr *hdr;
- struct p54_txcancel *cancel;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*cancel),
- P54_CONTROL_TYPE_TXCANCEL, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- hdr = (void *)entry->data;
- cancel = (struct p54_txcancel *)skb_put(skb, sizeof(*cancel));
- cancel->req_id = hdr->req_id;
- priv->tx(dev, skb);
- return 0;
-}
-
-static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb,
- struct ieee80211_tx_info *info, u8 *queue, size_t *extra_len,
- u16 *flags, u16 *aid)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- struct p54_common *priv = dev->priv;
- int ret = 1;
-
- switch (priv->mode) {
- case NL80211_IFTYPE_MONITOR:
- /*
- * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for
- * every frame in promiscuous/monitor mode.
- * see STSW45x0C LMAC API - page 12.
- */
- *aid = 0;
- *flags = P54_HDR_FLAG_DATA_OUT_PROMISC;
- *queue += P54_QUEUE_DATA;
- break;
- case NL80211_IFTYPE_STATION:
- *aid = 1;
- if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) {
- *queue = P54_QUEUE_MGMT;
- ret = 0;
- } else
- *queue += P54_QUEUE_DATA;
- break;
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
- *aid = 0;
- *queue = P54_QUEUE_CAB;
- return 0;
- }
-
- if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) {
- if (ieee80211_is_probe_resp(hdr->frame_control)) {
- *aid = 0;
- *queue = P54_QUEUE_MGMT;
- *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP |
- P54_HDR_FLAG_DATA_OUT_NOCANCEL;
- return 0;
- } else if (ieee80211_is_beacon(hdr->frame_control)) {
- *aid = 0;
-
- if (info->flags & IEEE80211_TX_CTL_INJECTED) {
- /*
- * Injecting beacons on top of a AP is
- * not a good idea... nevertheless,
- * it should be doable.
- */
-
- *queue += P54_QUEUE_DATA;
- return 1;
- }
-
- *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP;
- *queue = P54_QUEUE_BEACON;
- *extra_len = IEEE80211_MAX_TIM_LEN;
- return 0;
- } else {
- *queue = P54_QUEUE_MGMT;
- ret = 0;
- }
- } else
- *queue += P54_QUEUE_DATA;
-
- if (info->control.sta)
- *aid = info->control.sta->aid;
-
- if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
- *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
- break;
- }
- return ret;
-}
-
-static u8 p54_convert_algo(enum ieee80211_key_alg alg)
-{
- switch (alg) {
- case ALG_WEP:
- return P54_CRYPTO_WEP;
- case ALG_TKIP:
- return P54_CRYPTO_TKIPMICHAEL;
- case ALG_CCMP:
- return P54_CRYPTO_AESCCMP;
- default:
- return 0;
- }
-}
-
-static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_tx_queue_stats *current_queue;
- struct p54_common *priv = dev->priv;
- struct p54_hdr *hdr;
- struct p54_tx_data *txhdr;
- size_t padding, len, tim_len = 0;
- int i, j, ridx, ret;
- u16 hdr_flags = 0, aid = 0;
- u8 rate, queue, crypt_offset = 0;
- u8 cts_rate = 0x20;
- u8 rc_flags;
- u8 calculated_tries[4];
- u8 nrates = 0, nremaining = 8;
-
- queue = skb_get_queue_mapping(skb);
-
- ret = p54_tx_fill(dev, skb, info, &queue, &tim_len, &hdr_flags, &aid);
- current_queue = &priv->tx_stats[queue];
- if (unlikely((current_queue->len > current_queue->limit) && ret))
- return NETDEV_TX_BUSY;
- current_queue->len++;
- current_queue->count++;
- if ((current_queue->len == current_queue->limit) && ret)
- ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
-
- padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
- len = skb->len;
-
- if (info->control.hw_key) {
- crypt_offset = ieee80211_get_hdrlen_from_skb(skb);
- if (info->control.hw_key->alg == ALG_TKIP) {
- u8 *iv = (u8 *)(skb->data + crypt_offset);
- /*
- * The firmware excepts that the IV has to have
- * this special format
- */
- iv[1] = iv[0];
- iv[0] = iv[2];
- iv[2] = 0;
- }
- }
-
- txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding);
- hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr));
-
- if (padding)
- hdr_flags |= P54_HDR_FLAG_DATA_ALIGN;
- hdr->type = cpu_to_le16(aid);
- hdr->rts_tries = info->control.rates[0].count;
-
- /*
- * we register the rates in perfect order, and
- * RTS/CTS won't happen on 5 GHz
- */
- cts_rate = info->control.rts_cts_rate_idx;
-
- memset(&txhdr->rateset, 0, sizeof(txhdr->rateset));
-
- /* see how many rates got used */
- for (i = 0; i < 4; i++) {
- if (info->control.rates[i].idx < 0)
- break;
- nrates++;
- }
-
- /* limit tries to 8/nrates per rate */
- for (i = 0; i < nrates; i++) {
- /*
- * The magic expression here is equivalent to 8/nrates for
- * all values that matter, but avoids division and jumps.
- * Note that nrates can only take the values 1 through 4.
- */
- calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1,
- info->control.rates[i].count);
- nremaining -= calculated_tries[i];
- }
-
- /* if there are tries left, distribute from back to front */
- for (i = nrates - 1; nremaining > 0 && i >= 0; i--) {
- int tmp = info->control.rates[i].count - calculated_tries[i];
-
- if (tmp <= 0)
- continue;
- /* RC requested more tries at this rate */
-
- tmp = min_t(int, tmp, nremaining);
- calculated_tries[i] += tmp;
- nremaining -= tmp;
- }
-
- ridx = 0;
- for (i = 0; i < nrates && ridx < 8; i++) {
- /* we register the rates in perfect order */
- rate = info->control.rates[i].idx;
- if (info->band == IEEE80211_BAND_5GHZ)
- rate += 4;
-
- /* store the count we actually calculated for TX status */
- info->control.rates[i].count = calculated_tries[i];
-
- rc_flags = info->control.rates[i].flags;
- if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) {
- rate |= 0x10;
- cts_rate |= 0x10;
- }
- if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
- rate |= 0x40;
- else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
- rate |= 0x20;
- for (j = 0; j < calculated_tries[i] && ridx < 8; j++) {
- txhdr->rateset[ridx] = rate;
- ridx++;
- }
- }
-
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
- hdr_flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
-
- /* TODO: enable bursting */
- hdr->flags = cpu_to_le16(hdr_flags);
- hdr->tries = ridx;
- txhdr->rts_rate_idx = 0;
- if (info->control.hw_key) {
- txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
- txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
- memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
- if (info->control.hw_key->alg == ALG_TKIP) {
- if (unlikely(skb_tailroom(skb) < 12))
- goto err;
- /* reserve space for the MIC key */
- len += 8;
- memcpy(skb_put(skb, 8), &(info->control.hw_key->key
- [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8);
- }
- /* reserve some space for ICV */
- len += info->control.hw_key->icv_len;
- memset(skb_put(skb, info->control.hw_key->icv_len), 0,
- info->control.hw_key->icv_len);
- } else {
- txhdr->key_type = 0;
- txhdr->key_len = 0;
- }
- txhdr->crypt_offset = crypt_offset;
- txhdr->hw_queue = queue;
- txhdr->backlog = current_queue->len;
- memset(txhdr->durations, 0, sizeof(txhdr->durations));
- txhdr->tx_antenna = ((info->antenna_sel_tx == 0) ?
- 2 : info->antenna_sel_tx - 1) & priv->tx_diversity_mask;
- if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
- txhdr->longbow.cts_rate = cts_rate;
- txhdr->longbow.output_power = cpu_to_le16(priv->output_power);
- } else {
- txhdr->normal.output_power = priv->output_power;
- txhdr->normal.cts_rate = cts_rate;
- }
- if (padding)
- txhdr->align[0] = padding;
-
- hdr->len = cpu_to_le16(len);
- /* modifies skb->cb and with it info, so must be last! */
- if (unlikely(p54_assign_address(dev, skb, hdr, skb->len + tim_len)))
- goto err;
- priv->tx(dev, skb);
-
- queue_delayed_work(dev->workqueue, &priv->work,
- msecs_to_jiffies(P54_TX_FRAME_LIFETIME));
-
- return NETDEV_TX_OK;
-
- err:
- skb_pull(skb, sizeof(*hdr) + sizeof(*txhdr) + padding);
- current_queue->len--;
- current_queue->count--;
- return NETDEV_TX_BUSY;
-}
-
-static int p54_setup_mac(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_setup_mac *setup;
- u16 mode;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*setup),
- P54_CONTROL_TYPE_SETUP, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- setup = (struct p54_setup_mac *) skb_put(skb, sizeof(*setup));
- if (dev->conf.radio_enabled) {
- switch (priv->mode) {
- case NL80211_IFTYPE_STATION:
- mode = P54_FILTER_TYPE_STATION;
- break;
- case NL80211_IFTYPE_AP:
- mode = P54_FILTER_TYPE_AP;
- break;
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- mode = P54_FILTER_TYPE_IBSS;
- break;
- case NL80211_IFTYPE_MONITOR:
- mode = P54_FILTER_TYPE_PROMISCUOUS;
- break;
- default:
- mode = P54_FILTER_TYPE_HIBERNATE;
- break;
- }
-
- /*
- * "TRANSPARENT and PROMISCUOUS are mutually exclusive"
- * STSW45X0C LMAC API - page 12
- */
- if (((priv->filter_flags & FIF_PROMISC_IN_BSS) ||
- (priv->filter_flags & FIF_OTHER_BSS)) &&
- (mode != P54_FILTER_TYPE_PROMISCUOUS))
- mode |= P54_FILTER_TYPE_TRANSPARENT;
- } else
- mode = P54_FILTER_TYPE_HIBERNATE;
-
- setup->mac_mode = cpu_to_le16(mode);
- memcpy(setup->mac_addr, priv->mac_addr, ETH_ALEN);
- memcpy(setup->bssid, priv->bssid, ETH_ALEN);
- setup->rx_antenna = 2 & priv->rx_diversity_mask; /* automatic */
- setup->rx_align = 0;
- if (priv->fw_var < 0x500) {
- setup->v1.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
- memset(setup->v1.rts_rates, 0, 8);
- setup->v1.rx_addr = cpu_to_le32(priv->rx_end);
- setup->v1.max_rx = cpu_to_le16(priv->rx_mtu);
- setup->v1.rxhw = cpu_to_le16(priv->rxhw);
- setup->v1.wakeup_timer = cpu_to_le16(priv->wakeup_timer);
- setup->v1.unalloc0 = cpu_to_le16(0);
- } else {
- setup->v2.rx_addr = cpu_to_le32(priv->rx_end);
- setup->v2.max_rx = cpu_to_le16(priv->rx_mtu);
- setup->v2.rxhw = cpu_to_le16(priv->rxhw);
- setup->v2.timer = cpu_to_le16(priv->wakeup_timer);
- setup->v2.truncate = cpu_to_le16(48896);
- setup->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
- setup->v2.sbss_offset = 0;
- setup->v2.mcast_window = 0;
- setup->v2.rx_rssi_threshold = 0;
- setup->v2.rx_ed_threshold = 0;
- setup->v2.ref_clock = cpu_to_le32(644245094);
- setup->v2.lpf_bandwidth = cpu_to_le16(65535);
- setup->v2.osc_start_delay = cpu_to_le16(65535);
- }
- priv->tx(dev, skb);
- return 0;
-}
-
-static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_hdr *hdr;
- struct p54_scan_head *head;
- struct p54_iq_autocal_entry *iq_autocal;
- union p54_scan_body_union *body;
- struct p54_scan_tail_rate *rate;
- struct pda_rssi_cal_entry *rssi;
- unsigned int i;
- void *entry;
- int band = dev->conf.channel->band;
- __le16 freq = cpu_to_le16(dev->conf.channel->center_freq);
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) +
- 2 + sizeof(*iq_autocal) + sizeof(*body) +
- sizeof(*rate) + 2 * sizeof(*rssi),
- P54_CONTROL_TYPE_SCAN, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- head = (struct p54_scan_head *) skb_put(skb, sizeof(*head));
- memset(head->scan_params, 0, sizeof(head->scan_params));
- head->mode = cpu_to_le16(mode);
- head->dwell = cpu_to_le16(dwell);
- head->freq = freq;
-
- if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
- __le16 *pa_power_points = (__le16 *) skb_put(skb, 2);
- *pa_power_points = cpu_to_le16(0x0c);
- }
-
- iq_autocal = (void *) skb_put(skb, sizeof(*iq_autocal));
- for (i = 0; i < priv->iq_autocal_len; i++) {
- if (priv->iq_autocal[i].freq != freq)
- continue;
-
- memcpy(iq_autocal, &priv->iq_autocal[i].params,
- sizeof(struct p54_iq_autocal_entry));
- break;
- }
- if (i == priv->iq_autocal_len)
- goto err;
-
- if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW)
- body = (void *) skb_put(skb, sizeof(body->longbow));
- else
- body = (void *) skb_put(skb, sizeof(body->normal));
-
- for (i = 0; i < priv->output_limit->entries; i++) {
- __le16 *entry_freq = (void *) (priv->output_limit->data +
- priv->output_limit->entry_size * i);
-
- if (*entry_freq != freq)
- continue;
-
- if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
- memcpy(&body->longbow.power_limits,
- (void *) entry_freq + sizeof(__le16),
- priv->output_limit->entry_size);
- } else {
- struct pda_channel_output_limit *limits =
- (void *) entry_freq;
-
- body->normal.val_barker = 0x38;
- body->normal.val_bpsk = body->normal.dup_bpsk =
- limits->val_bpsk;
- body->normal.val_qpsk = body->normal.dup_qpsk =
- limits->val_qpsk;
- body->normal.val_16qam = body->normal.dup_16qam =
- limits->val_16qam;
- body->normal.val_64qam = body->normal.dup_64qam =
- limits->val_64qam;
- }
- break;
- }
- if (i == priv->output_limit->entries)
- goto err;
-
- entry = (void *)(priv->curve_data->data + priv->curve_data->offset);
- for (i = 0; i < priv->curve_data->entries; i++) {
- if (*((__le16 *)entry) != freq) {
- entry += priv->curve_data->entry_size;
- continue;
- }
-
- if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
- memcpy(&body->longbow.curve_data,
- (void *) entry + sizeof(__le16),
- priv->curve_data->entry_size);
- } else {
- struct p54_scan_body *chan = &body->normal;
- struct pda_pa_curve_data *curve_data =
- (void *) priv->curve_data->data;
-
- entry += sizeof(__le16);
- chan->pa_points_per_curve = 8;
- memset(chan->curve_data, 0, sizeof(*chan->curve_data));
- memcpy(chan->curve_data, entry,
- sizeof(struct p54_pa_curve_data_sample) *
- min((u8)8, curve_data->points_per_channel));
- }
- break;
- }
- if (i == priv->curve_data->entries)
- goto err;
-
- if ((priv->fw_var >= 0x500) && (priv->fw_var < 0x509)) {
- rate = (void *) skb_put(skb, sizeof(*rate));
- rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
- for (i = 0; i < sizeof(rate->rts_rates); i++)
- rate->rts_rates[i] = i;
- }
-
- rssi = (struct pda_rssi_cal_entry *) skb_put(skb, sizeof(*rssi));
- rssi->mul = cpu_to_le16(priv->rssical_db[band].mul);
- rssi->add = cpu_to_le16(priv->rssical_db[band].add);
- if (priv->rxhw == PDR_SYNTH_FRONTEND_LONGBOW) {
- /* Longbow frontend needs ever more */
- rssi = (void *) skb_put(skb, sizeof(*rssi));
- rssi->mul = cpu_to_le16(priv->rssical_db[band].longbow_unkn);
- rssi->add = cpu_to_le16(priv->rssical_db[band].longbow_unk2);
- }
-
- if (priv->fw_var >= 0x509) {
- rate = (void *) skb_put(skb, sizeof(*rate));
- rate->basic_rate_mask = cpu_to_le32(priv->basic_rate_mask);
- for (i = 0; i < sizeof(rate->rts_rates); i++)
- rate->rts_rates[i] = i;
- }
-
- hdr = (struct p54_hdr *) skb->data;
- hdr->len = cpu_to_le16(skb->len - sizeof(*hdr));
-
- priv->tx(dev, skb);
- return 0;
-
- err:
- printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
- p54_free_skb(dev, skb);
- return -EINVAL;
-}
-
-static int p54_set_leds(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_led *led;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*led),
- P54_CONTROL_TYPE_LED, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- led = (struct p54_led *) skb_put(skb, sizeof(*led));
- led->flags = cpu_to_le16(0x0003);
- led->mask[0] = led->mask[1] = cpu_to_le16(priv->softled_state);
- led->delay[0] = cpu_to_le16(1);
- led->delay[1] = cpu_to_le16(0);
- priv->tx(dev, skb);
- return 0;
-}
-
-#define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, _txop) \
-do { \
- queue.aifs = cpu_to_le16(ai_fs); \
- queue.cwmin = cpu_to_le16(cw_min); \
- queue.cwmax = cpu_to_le16(cw_max); \
- queue.txop = cpu_to_le16(_txop); \
-} while(0)
-
-static int p54_set_edcf(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_edcf *edcf;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*edcf),
- P54_CONTROL_TYPE_DCFINIT, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- edcf = (struct p54_edcf *)skb_put(skb, sizeof(*edcf));
- if (priv->use_short_slot) {
- edcf->slottime = 9;
- edcf->sifs = 0x10;
- edcf->eofpad = 0x00;
- } else {
- edcf->slottime = 20;
- edcf->sifs = 0x0a;
- edcf->eofpad = 0x06;
- }
- /* (see prism54/isl_oid.h for further details) */
- edcf->frameburst = cpu_to_le16(0);
- edcf->round_trip_delay = cpu_to_le16(0);
- edcf->flags = 0;
- memset(edcf->mapping, 0, sizeof(edcf->mapping));
- memcpy(edcf->queue, priv->qos_params, sizeof(edcf->queue));
- priv->tx(dev, skb);
- return 0;
-}
-
-static int p54_set_ps(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_psm *psm;
- u16 mode;
- int i;
-
- if (dev->conf.flags & IEEE80211_CONF_PS)
- mode = P54_PSM | P54_PSM_BEACON_TIMEOUT | P54_PSM_DTIM |
- P54_PSM_CHECKSUM | P54_PSM_MCBC;
- else
- mode = P54_PSM_CAM;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*psm),
- P54_CONTROL_TYPE_PSM, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
-
- psm = (struct p54_psm *)skb_put(skb, sizeof(*psm));
- psm->mode = cpu_to_le16(mode);
- psm->aid = cpu_to_le16(priv->aid);
- for (i = 0; i < ARRAY_SIZE(psm->intervals); i++) {
- psm->intervals[i].interval =
- cpu_to_le16(dev->conf.listen_interval);
- psm->intervals[i].periods = cpu_to_le16(1);
- }
-
- psm->beacon_rssi_skip_max = 200;
- psm->rssi_delta_threshold = 0;
- psm->nr = 10;
- psm->exclude[0] = 0;
-
- priv->tx(dev, skb);
-
- return 0;
-}
-
-static int p54_beacon_tim(struct sk_buff *skb)
-{
- /*
- * the good excuse for this mess is ... the firmware.
- * The dummy TIM MUST be at the end of the beacon frame,
- * because it'll be overwritten!
- */
-
- struct ieee80211_mgmt *mgmt = (void *)skb->data;
- u8 *pos, *end;
-
- if (skb->len <= sizeof(mgmt))
- return -EINVAL;
-
- pos = (u8 *)mgmt->u.beacon.variable;
- end = skb->data + skb->len;
- while (pos < end) {
- if (pos + 2 + pos[1] > end)
- return -EINVAL;
-
- if (pos[0] == WLAN_EID_TIM) {
- u8 dtim_len = pos[1];
- u8 dtim_period = pos[3];
- u8 *next = pos + 2 + dtim_len;
-
- if (dtim_len < 3)
- return -EINVAL;
-
- memmove(pos, next, end - next);
-
- if (dtim_len > 3)
- skb_trim(skb, skb->len - (dtim_len - 3));
-
- pos = end - (dtim_len + 2);
-
- /* add the dummy at the end */
- pos[0] = WLAN_EID_TIM;
- pos[1] = 3;
- pos[2] = 0;
- pos[3] = dtim_period;
- pos[4] = 0;
- return 0;
- }
- pos += 2 + pos[1];
- }
- return 0;
-}
-
-static int p54_beacon_update(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *beacon;
- int ret;
-
- if (priv->cached_beacon) {
- p54_tx_cancel(dev, priv->cached_beacon);
- /* wait for the last beacon the be freed */
- msleep(10);
- }
-
- beacon = ieee80211_beacon_get(dev, vif);
- if (!beacon)
- return -ENOMEM;
- ret = p54_beacon_tim(beacon);
- if (ret)
- return ret;
- ret = p54_tx(dev, beacon);
- if (ret)
- return ret;
- priv->cached_beacon = beacon;
- priv->tsf_high32 = 0;
- priv->tsf_low32 = 0;
-
- return 0;
-}
-
-static int p54_start(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- int err;
-
- mutex_lock(&priv->conf_mutex);
- err = priv->open(dev);
- if (err)
- goto out;
- P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47);
- P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94);
- P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0);
- P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0);
- err = p54_set_edcf(dev);
- if (err)
- goto out;
-
- memset(priv->bssid, ~0, ETH_ALEN);
- priv->mode = NL80211_IFTYPE_MONITOR;
- err = p54_setup_mac(dev);
- if (err) {
- priv->mode = NL80211_IFTYPE_UNSPECIFIED;
- goto out;
- }
-
- queue_delayed_work(dev->workqueue, &priv->work, 0);
-
- priv->softled_state = 0;
- err = p54_set_leds(dev);
-
-out:
- mutex_unlock(&priv->conf_mutex);
- return err;
-}
-
-static void p54_stop(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
-
- mutex_lock(&priv->conf_mutex);
- priv->mode = NL80211_IFTYPE_UNSPECIFIED;
- priv->softled_state = 0;
- p54_set_leds(dev);
-
-#ifdef CONFIG_P54_LEDS
- cancel_delayed_work_sync(&priv->led_work);
-#endif /* CONFIG_P54_LEDS */
- cancel_delayed_work_sync(&priv->work);
- if (priv->cached_beacon)
- p54_tx_cancel(dev, priv->cached_beacon);
-
- priv->stop(dev);
- while ((skb = skb_dequeue(&priv->tx_queue)))
- kfree_skb(skb);
- priv->cached_beacon = NULL;
- priv->tsf_high32 = priv->tsf_low32 = 0;
- mutex_unlock(&priv->conf_mutex);
-}
-
-static int p54_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
-{
- struct p54_common *priv = dev->priv;
-
- mutex_lock(&priv->conf_mutex);
- if (priv->mode != NL80211_IFTYPE_MONITOR) {
- mutex_unlock(&priv->conf_mutex);
- return -EOPNOTSUPP;
- }
-
- priv->vif = conf->vif;
-
- switch (conf->type) {
- case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_MESH_POINT:
- priv->mode = conf->type;
- break;
- default:
- mutex_unlock(&priv->conf_mutex);
- return -EOPNOTSUPP;
- }
-
- memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
- p54_setup_mac(dev);
- mutex_unlock(&priv->conf_mutex);
- return 0;
-}
-
-static void p54_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
-{
- struct p54_common *priv = dev->priv;
-
- mutex_lock(&priv->conf_mutex);
- priv->vif = NULL;
- if (priv->cached_beacon)
- p54_tx_cancel(dev, priv->cached_beacon);
- priv->mode = NL80211_IFTYPE_MONITOR;
- memset(priv->mac_addr, 0, ETH_ALEN);
- memset(priv->bssid, 0, ETH_ALEN);
- p54_setup_mac(dev);
- mutex_unlock(&priv->conf_mutex);
-}
-
-static int p54_config(struct ieee80211_hw *dev, u32 changed)
-{
- int ret = 0;
- struct p54_common *priv = dev->priv;
- struct ieee80211_conf *conf = &dev->conf;
-
- mutex_lock(&priv->conf_mutex);
- if (changed & IEEE80211_CONF_CHANGE_POWER)
- priv->output_power = conf->power_level << 2;
- if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
- ret = p54_setup_mac(dev);
- if (ret)
- goto out;
- }
- if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
- ret = p54_scan(dev, P54_SCAN_EXIT, 0);
- if (ret)
- goto out;
- }
- if (changed & IEEE80211_CONF_CHANGE_PS) {
- ret = p54_set_ps(dev);
- if (ret)
- goto out;
- }
-
-out:
- mutex_unlock(&priv->conf_mutex);
- return ret;
-}
-
-static void p54_configure_filter(struct ieee80211_hw *dev,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count, struct dev_mc_list *mclist)
-{
- struct p54_common *priv = dev->priv;
-
- *total_flags &= FIF_PROMISC_IN_BSS |
- FIF_OTHER_BSS;
-
- priv->filter_flags = *total_flags;
-
- if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS))
- p54_setup_mac(dev);
-}
-
-static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue,
- const struct ieee80211_tx_queue_params *params)
-{
- struct p54_common *priv = dev->priv;
- int ret;
-
- mutex_lock(&priv->conf_mutex);
- if ((params) && !(queue > 4)) {
- P54_SET_QUEUE(priv->qos_params[queue], params->aifs,
- params->cw_min, params->cw_max, params->txop);
- ret = p54_set_edcf(dev);
- } else
- ret = -EINVAL;
- mutex_unlock(&priv->conf_mutex);
- return ret;
-}
-
-static int p54_init_xbow_synth(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_xbow_synth *xbow;
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*xbow),
- P54_CONTROL_TYPE_XBOW_SYNTH_CFG, GFP_KERNEL);
- if (!skb)
- return -ENOMEM;
-
- xbow = (struct p54_xbow_synth *)skb_put(skb, sizeof(*xbow));
- xbow->magic1 = cpu_to_le16(0x1);
- xbow->magic2 = cpu_to_le16(0x2);
- xbow->freq = cpu_to_le16(5390);
- memset(xbow->padding, 0, sizeof(xbow->padding));
- priv->tx(dev, skb);
- return 0;
-}
-
-static void p54_work(struct work_struct *work)
-{
- struct p54_common *priv = container_of(work, struct p54_common,
- work.work);
- struct ieee80211_hw *dev = priv->hw;
- struct sk_buff *skb;
-
- if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
- return ;
-
- /*
- * TODO: walk through tx_queue and do the following tasks
- * 1. initiate bursts.
- * 2. cancel stuck frames / reset the device if necessary.
- */
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL,
- sizeof(struct p54_statistics),
- P54_CONTROL_TYPE_STAT_READBACK, GFP_KERNEL);
- if (!skb)
- return ;
-
- priv->tx(dev, skb);
-}
-
-static int p54_get_stats(struct ieee80211_hw *dev,
- struct ieee80211_low_level_stats *stats)
-{
- struct p54_common *priv = dev->priv;
-
- memcpy(stats, &priv->stats, sizeof(*stats));
- return 0;
-}
-
-static int p54_get_tx_stats(struct ieee80211_hw *dev,
- struct ieee80211_tx_queue_stats *stats)
-{
- struct p54_common *priv = dev->priv;
-
- memcpy(stats, &priv->tx_stats[P54_QUEUE_DATA],
- sizeof(stats[0]) * dev->queues);
- return 0;
-}
-
-static void p54_bss_info_changed(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *info,
- u32 changed)
-{
- struct p54_common *priv = dev->priv;
- int ret;
-
- mutex_lock(&priv->conf_mutex);
- if (changed & BSS_CHANGED_BSSID) {
- memcpy(priv->bssid, info->bssid, ETH_ALEN);
- ret = p54_setup_mac(dev);
- if (ret)
- goto out;
- }
-
- if (changed & BSS_CHANGED_BEACON) {
- ret = p54_scan(dev, P54_SCAN_EXIT, 0);
- if (ret)
- goto out;
- ret = p54_setup_mac(dev);
- if (ret)
- goto out;
- ret = p54_beacon_update(dev, vif);
- if (ret)
- goto out;
- }
- /* XXX: this mimics having two callbacks... clean up */
- out:
- mutex_unlock(&priv->conf_mutex);
-
- if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
- priv->use_short_slot = info->use_short_slot;
- p54_set_edcf(dev);
- }
- if (changed & BSS_CHANGED_BASIC_RATES) {
- if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
- priv->basic_rate_mask = (info->basic_rates << 4);
- else
- priv->basic_rate_mask = info->basic_rates;
- p54_setup_mac(dev);
- if (priv->fw_var >= 0x500)
- p54_scan(dev, P54_SCAN_EXIT, 0);
- }
- if (changed & BSS_CHANGED_ASSOC) {
- if (info->assoc) {
- priv->aid = info->aid;
- priv->wakeup_timer = info->beacon_int *
- info->dtim_period * 5;
- p54_setup_mac(dev);
- }
- }
-}
-
-static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct p54_common *priv = dev->priv;
- struct sk_buff *skb;
- struct p54_keycache *rxkey;
- int slot, ret = 0;
- u8 algo = 0;
-
- if (modparam_nohwcrypt)
- return -EOPNOTSUPP;
-
- mutex_lock(&priv->conf_mutex);
- if (cmd == SET_KEY) {
- switch (key->alg) {
- case ALG_TKIP:
- if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
- BR_DESC_PRIV_CAP_TKIP))) {
- ret = -EOPNOTSUPP;
- goto out_unlock;
- }
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- algo = P54_CRYPTO_TKIPMICHAEL;
- break;
- case ALG_WEP:
- if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
- ret = -EOPNOTSUPP;
- goto out_unlock;
- }
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- algo = P54_CRYPTO_WEP;
- break;
- case ALG_CCMP:
- if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
- ret = -EOPNOTSUPP;
- goto out_unlock;
- }
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- algo = P54_CRYPTO_AESCCMP;
- break;
- default:
- ret = -EOPNOTSUPP;
- goto out_unlock;
- }
- slot = bitmap_find_free_region(priv->used_rxkeys,
- priv->rx_keycache_size, 0);
-
- if (slot < 0) {
- /*
- * The device supports the choosen algorithm, but the
- * firmware does not provide enough key slots to store
- * all of them.
- * But encryption offload for outgoing frames is always
- * possible, so we just pretend that the upload was
- * successful and do the decryption in software.
- */
-
- /* mark the key as invalid. */
- key->hw_key_idx = 0xff;
- goto out_unlock;
- }
- } else {
- slot = key->hw_key_idx;
-
- if (slot == 0xff) {
- /* This key was not uploaded into the rx key cache. */
-
- goto out_unlock;
- }
-
- bitmap_release_region(priv->used_rxkeys, slot, 0);
- algo = 0;
- }
-
- skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*rxkey),
- P54_CONTROL_TYPE_RX_KEYCACHE, GFP_KERNEL);
- if (!skb) {
- bitmap_release_region(priv->used_rxkeys, slot, 0);
- ret = -ENOSPC;
- goto out_unlock;
- }
-
- rxkey = (struct p54_keycache *)skb_put(skb, sizeof(*rxkey));
- rxkey->entry = slot;
- rxkey->key_id = key->keyidx;
- rxkey->key_type = algo;
- if (sta)
- memcpy(rxkey->mac, sta->addr, ETH_ALEN);
- else
- memset(rxkey->mac, ~0, ETH_ALEN);
- if (key->alg != ALG_TKIP) {
- rxkey->key_len = min((u8)16, key->keylen);
- memcpy(rxkey->key, key->key, rxkey->key_len);
- } else {
- rxkey->key_len = 24;
- memcpy(rxkey->key, key->key, 16);
- memcpy(&(rxkey->key[16]), &(key->key
- [NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY]), 8);
- }
-
- priv->tx(dev, skb);
- key->hw_key_idx = slot;
-
-out_unlock:
- mutex_unlock(&priv->conf_mutex);
- return ret;
-}
-
-#ifdef CONFIG_P54_LEDS
-static void p54_update_leds(struct work_struct *work)
-{
- struct p54_common *priv = container_of(work, struct p54_common,
- led_work.work);
- int err, i, tmp, blink_delay = 400;
- bool rerun = false;
-
- /* Don't toggle the LED, when the device is down. */
- if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
- return ;
-
- for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
- if (priv->leds[i].toggled) {
- priv->softled_state |= BIT(i);
-
- tmp = 70 + 200 / (priv->leds[i].toggled);
- if (tmp < blink_delay)
- blink_delay = tmp;
-
- if (priv->leds[i].led_dev.brightness == LED_OFF)
- rerun = true;
-
- priv->leds[i].toggled =
- !!priv->leds[i].led_dev.brightness;
- } else
- priv->softled_state &= ~BIT(i);
-
- err = p54_set_leds(priv->hw);
- if (err && net_ratelimit())
- printk(KERN_ERR "%s: failed to update LEDs.\n",
- wiphy_name(priv->hw->wiphy));
-
- if (rerun)
- queue_delayed_work(priv->hw->workqueue, &priv->led_work,
- msecs_to_jiffies(blink_delay));
-}
-
-static void p54_led_brightness_set(struct led_classdev *led_dev,
- enum led_brightness brightness)
-{
- struct p54_led_dev *led = container_of(led_dev, struct p54_led_dev,
- led_dev);
- struct ieee80211_hw *dev = led->hw_dev;
- struct p54_common *priv = dev->priv;
-
- if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
- return ;
-
- if (brightness) {
- led->toggled++;
- queue_delayed_work(priv->hw->workqueue, &priv->led_work,
- HZ/10);
- }
-}
-
-static int p54_register_led(struct ieee80211_hw *dev,
- unsigned int led_index,
- char *name, char *trigger)
-{
- struct p54_common *priv = dev->priv;
- struct p54_led_dev *led = &priv->leds[led_index];
- int err;
-
- if (led->registered)
- return -EEXIST;
-
- snprintf(led->name, sizeof(led->name), "p54-%s::%s",
- wiphy_name(dev->wiphy), name);
- led->hw_dev = dev;
- led->index = led_index;
- led->led_dev.name = led->name;
- led->led_dev.default_trigger = trigger;
- led->led_dev.brightness_set = p54_led_brightness_set;
-
- err = led_classdev_register(wiphy_dev(dev->wiphy), &led->led_dev);
- if (err)
- printk(KERN_ERR "%s: Failed to register %s LED.\n",
- wiphy_name(dev->wiphy), name);
- else
- led->registered = 1;
-
- return err;
-}
-
-static int p54_init_leds(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- int err;
-
- /*
- * TODO:
- * Figure out if the EEPROM contains some hints about the number
- * of available/programmable LEDs of the device.
- */
-
- INIT_DELAYED_WORK(&priv->led_work, p54_update_leds);
-
- err = p54_register_led(dev, 0, "assoc",
- ieee80211_get_assoc_led_name(dev));
- if (err)
- return err;
-
- err = p54_register_led(dev, 1, "tx",
- ieee80211_get_tx_led_name(dev));
- if (err)
- return err;
-
- err = p54_register_led(dev, 2, "rx",
- ieee80211_get_rx_led_name(dev));
- if (err)
- return err;
-
- err = p54_register_led(dev, 3, "radio",
- ieee80211_get_radio_led_name(dev));
- if (err)
- return err;
-
- err = p54_set_leds(dev);
- return err;
-}
-
-static void p54_unregister_leds(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(priv->leds); i++)
- if (priv->leds[i].registered)
- led_classdev_unregister(&priv->leds[i].led_dev);
-}
-#endif /* CONFIG_P54_LEDS */
-
-static const struct ieee80211_ops p54_ops = {
- .tx = p54_tx,
- .start = p54_start,
- .stop = p54_stop,
- .add_interface = p54_add_interface,
- .remove_interface = p54_remove_interface,
- .set_tim = p54_set_tim,
- .sta_notify = p54_sta_notify,
- .set_key = p54_set_key,
- .config = p54_config,
- .bss_info_changed = p54_bss_info_changed,
- .configure_filter = p54_configure_filter,
- .conf_tx = p54_conf_tx,
- .get_stats = p54_get_stats,
- .get_tx_stats = p54_get_tx_stats
-};
-
-struct ieee80211_hw *p54_init_common(size_t priv_data_len)
-{
- struct ieee80211_hw *dev;
- struct p54_common *priv;
-
- dev = ieee80211_alloc_hw(priv_data_len, &p54_ops);
- if (!dev)
- return NULL;
-
- priv = dev->priv;
- priv->hw = dev;
- priv->mode = NL80211_IFTYPE_UNSPECIFIED;
- priv->basic_rate_mask = 0x15f;
- skb_queue_head_init(&priv->tx_queue);
- dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_NOISE_DBM;
-
- dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_MESH_POINT);
-
- dev->channel_change_time = 1000; /* TODO: find actual value */
- priv->tx_stats[P54_QUEUE_BEACON].limit = 1;
- priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1;
- priv->tx_stats[P54_QUEUE_MGMT].limit = 3;
- priv->tx_stats[P54_QUEUE_CAB].limit = 3;
- priv->tx_stats[P54_QUEUE_DATA].limit = 5;
- dev->queues = 1;
- priv->noise = -94;
- /*
- * We support at most 8 tries no matter which rate they're at,
- * we cannot support max_rates * max_rate_tries as we set it
- * here, but setting it correctly to 4/2 or so would limit us
- * artificially if the RC algorithm wants just two rates, so
- * let's say 4/7, we'll redistribute it at TX time, see the
- * comments there.
- */
- dev->max_rates = 4;
- dev->max_rate_tries = 7;
- dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 +
- sizeof(struct p54_tx_data);
-
- mutex_init(&priv->conf_mutex);
- init_completion(&priv->eeprom_comp);
- INIT_DELAYED_WORK(&priv->work, p54_work);
-
- return dev;
-}
-EXPORT_SYMBOL_GPL(p54_init_common);
-
-int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
-{
- int err;
-
- err = ieee80211_register_hw(dev);
- if (err) {
- dev_err(pdev, "Cannot register device (%d).\n", err);
- return err;
- }
-
-#ifdef CONFIG_P54_LEDS
- err = p54_init_leds(dev);
- if (err)
- return err;
-#endif /* CONFIG_P54_LEDS */
-
- dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
- return 0;
-}
-EXPORT_SYMBOL_GPL(p54_register_common);
-
-void p54_free_common(struct ieee80211_hw *dev)
-{
- struct p54_common *priv = dev->priv;
- kfree(priv->iq_autocal);
- kfree(priv->output_limit);
- kfree(priv->curve_data);
- kfree(priv->used_rxkeys);
-
-#ifdef CONFIG_P54_LEDS
- p54_unregister_leds(dev);
-#endif /* CONFIG_P54_LEDS */
-}
-EXPORT_SYMBOL_GPL(p54_free_common);
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
deleted file mode 100644
index 75ead7a..0000000
--- a/drivers/net/wireless/p54/p54common.h
+++ /dev/null
@@ -1,644 +0,0 @@
-#ifndef P54COMMON_H
-#define P54COMMON_H
-
-/*
- * Common code specific definitions for mac80211 Prism54 drivers
- *
- * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
- * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de>
- *
- * Based on:
- * - the islsm (softmac prism54) driver, which is:
- * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
- *
- * - LMAC API interface header file for STLC4560 (lmac_longbow.h)
- * Copyright (C) 2007 Conexant Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct bootrec {
- __le32 code;
- __le32 len;
- u32 data[10];
-} __attribute__((packed));
-
-#define PDR_SYNTH_FRONTEND_MASK 0x0007
-#define PDR_SYNTH_FRONTEND_DUETTE3 0x0001
-#define PDR_SYNTH_FRONTEND_DUETTE2 0x0002
-#define PDR_SYNTH_FRONTEND_FRISBEE 0x0003
-#define PDR_SYNTH_FRONTEND_XBOW 0x0004
-#define PDR_SYNTH_FRONTEND_LONGBOW 0x0005
-#define PDR_SYNTH_IQ_CAL_MASK 0x0018
-#define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000
-#define PDR_SYNTH_IQ_CAL_DISABLED 0x0008
-#define PDR_SYNTH_IQ_CAL_ZIF 0x0010
-#define PDR_SYNTH_FAA_SWITCH_MASK 0x0020
-#define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020
-#define PDR_SYNTH_24_GHZ_MASK 0x0040
-#define PDR_SYNTH_24_GHZ_DISABLED 0x0040
-#define PDR_SYNTH_5_GHZ_MASK 0x0080
-#define PDR_SYNTH_5_GHZ_DISABLED 0x0080
-#define PDR_SYNTH_RX_DIV_MASK 0x0100
-#define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100
-#define PDR_SYNTH_TX_DIV_MASK 0x0200
-#define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200
-
-struct bootrec_exp_if {
- __le16 role;
- __le16 if_id;
- __le16 variant;
- __le16 btm_compat;
- __le16 top_compat;
-} __attribute__((packed));
-
-#define BR_DESC_PRIV_CAP_WEP BIT(0)
-#define BR_DESC_PRIV_CAP_TKIP BIT(1)
-#define BR_DESC_PRIV_CAP_MICHAEL BIT(2)
-#define BR_DESC_PRIV_CAP_CCX_CP BIT(3)
-#define BR_DESC_PRIV_CAP_CCX_MIC BIT(4)
-#define BR_DESC_PRIV_CAP_AESCCMP BIT(5)
-
-struct bootrec_desc {
- __le16 modes;
- __le16 flags;
- __le32 rx_start;
- __le32 rx_end;
- u8 headroom;
- u8 tailroom;
- u8 tx_queues;
- u8 tx_depth;
- u8 privacy_caps;
- u8 rx_keycache_size;
- u8 time_size;
- u8 padding;
- u8 rates[16];
- u8 padding2[4];
- __le16 rx_mtu;
-} __attribute__((packed));
-
-#define BR_CODE_MIN 0x80000000
-#define BR_CODE_COMPONENT_ID 0x80000001
-#define BR_CODE_COMPONENT_VERSION 0x80000002
-#define BR_CODE_DEPENDENT_IF 0x80000003
-#define BR_CODE_EXPOSED_IF 0x80000004
-#define BR_CODE_DESCR 0x80000101
-#define BR_CODE_MAX 0x8FFFFFFF
-#define BR_CODE_END_OF_BRA 0xFF0000FF
-#define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF
-
-#define P54_HDR_FLAG_DATA_ALIGN BIT(14)
-#define P54_HDR_FLAG_DATA_OUT_PROMISC BIT(0)
-#define P54_HDR_FLAG_DATA_OUT_TIMESTAMP BIT(1)
-#define P54_HDR_FLAG_DATA_OUT_SEQNR BIT(2)
-#define P54_HDR_FLAG_DATA_OUT_BIT3 BIT(3)
-#define P54_HDR_FLAG_DATA_OUT_BURST BIT(4)
-#define P54_HDR_FLAG_DATA_OUT_NOCANCEL BIT(5)
-#define P54_HDR_FLAG_DATA_OUT_CLEARTIM BIT(6)
-#define P54_HDR_FLAG_DATA_OUT_HITCHHIKE BIT(7)
-#define P54_HDR_FLAG_DATA_OUT_COMPRESS BIT(8)
-#define P54_HDR_FLAG_DATA_OUT_CONCAT BIT(9)
-#define P54_HDR_FLAG_DATA_OUT_PCS_ACCEPT BIT(10)
-#define P54_HDR_FLAG_DATA_OUT_WAITEOSP BIT(11)
-
-#define P54_HDR_FLAG_DATA_IN_FCS_GOOD BIT(0)
-#define P54_HDR_FLAG_DATA_IN_MATCH_MAC BIT(1)
-#define P54_HDR_FLAG_DATA_IN_MCBC BIT(2)
-#define P54_HDR_FLAG_DATA_IN_BEACON BIT(3)
-#define P54_HDR_FLAG_DATA_IN_MATCH_BSS BIT(4)
-#define P54_HDR_FLAG_DATA_IN_BCAST_BSS BIT(5)
-#define P54_HDR_FLAG_DATA_IN_DATA BIT(6)
-#define P54_HDR_FLAG_DATA_IN_TRUNCATED BIT(7)
-#define P54_HDR_FLAG_DATA_IN_BIT8 BIT(8)
-#define P54_HDR_FLAG_DATA_IN_TRANSPARENT BIT(9)
-
-/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
-
-struct pda_entry {
- __le16 len; /* includes both code and data */
- __le16 code;
- u8 data[0];
-} __attribute__ ((packed));
-
-struct eeprom_pda_wrap {
- __le32 magic;
- __le16 pad;
- __le16 len;
- __le32 arm_opcode;
- u8 data[0];
-} __attribute__ ((packed));
-
-struct p54_iq_autocal_entry {
- __le16 iq_param[4];
-} __attribute__ ((packed));
-
-struct pda_iq_autocal_entry {
- __le16 freq;
- struct p54_iq_autocal_entry params;
-} __attribute__ ((packed));
-
-struct pda_channel_output_limit {
- __le16 freq;
- u8 val_bpsk;
- u8 val_qpsk;
- u8 val_16qam;
- u8 val_64qam;
- u8 rate_set_mask;
- u8 rate_set_size;
-} __attribute__ ((packed));
-
-struct pda_pa_curve_data_sample_rev0 {
- u8 rf_power;
- u8 pa_detector;
- u8 pcv;
-} __attribute__ ((packed));
-
-struct pda_pa_curve_data_sample_rev1 {
- u8 rf_power;
- u8 pa_detector;
- u8 data_barker;
- u8 data_bpsk;
- u8 data_qpsk;
- u8 data_16qam;
- u8 data_64qam;
-} __attribute__ ((packed));
-
-struct p54_pa_curve_data_sample {
- u8 rf_power;
- u8 pa_detector;
- u8 data_barker;
- u8 data_bpsk;
- u8 data_qpsk;
- u8 data_16qam;
- u8 data_64qam;
- u8 padding;
-} __attribute__ ((packed));
-
-struct pda_pa_curve_data {
- u8 cal_method_rev;
- u8 channels;
- u8 points_per_channel;
- u8 padding;
- u8 data[0];
-} __attribute__ ((packed));
-
-struct pda_rssi_cal_entry {
- __le16 mul;
- __le16 add;
-} __attribute__ ((packed));
-
-struct pda_country {
- u8 regdomain;
- u8 alpha2[2];
- u8 flags;
-} __attribute__ ((packed));
-
-/*
- * Warning: Longbow's structures are bogus.
- */
-struct p54_channel_output_limit_longbow {
- __le16 rf_power_points[12];
-} __attribute__ ((packed));
-
-struct p54_pa_curve_data_sample_longbow {
- __le16 rf_power;
- __le16 pa_detector;
- struct {
- __le16 data[4];
- } points[3] __attribute__ ((packed));
-} __attribute__ ((packed));
-
-struct pda_custom_wrapper {
- __le16 entries;
- __le16 entry_size;
- __le16 offset;
- __le16 len;
- u8 data[0];
-} __attribute__ ((packed));
-
-/*
- * this defines the PDR codes used to build PDAs as defined in document
- * number 553155. The current implementation mirrors version 1.1 of the
- * document and lists only PDRs supported by the ARM platform.
- */
-
-/* common and choice range (0x0000 - 0x0fff) */
-#define PDR_END 0x0000
-#define PDR_MANUFACTURING_PART_NUMBER 0x0001
-#define PDR_PDA_VERSION 0x0002
-#define PDR_NIC_SERIAL_NUMBER 0x0003
-
-#define PDR_MAC_ADDRESS 0x0101
-#define PDR_REGULATORY_DOMAIN_LIST 0x0103
-#define PDR_TEMPERATURE_TYPE 0x0107
-
-#define PDR_PRISM_PCI_IDENTIFIER 0x0402
-
-/* ARM range (0x1000 - 0x1fff) */
-#define PDR_COUNTRY_INFORMATION 0x1000
-#define PDR_INTERFACE_LIST 0x1001
-#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002
-#define PDR_OEM_NAME 0x1003
-#define PDR_PRODUCT_NAME 0x1004
-#define PDR_UTF8_OEM_NAME 0x1005
-#define PDR_UTF8_PRODUCT_NAME 0x1006
-#define PDR_COUNTRY_LIST 0x1007
-#define PDR_DEFAULT_COUNTRY 0x1008
-
-#define PDR_ANTENNA_GAIN 0x1100
-
-#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901
-#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902
-#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903
-#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904
-#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905
-#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906
-#define PDR_REGULATORY_POWER_LIMITS 0x1907
-#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908
-#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909
-#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a
-
-/* reserved range (0x2000 - 0x7fff) */
-
-/* customer range (0x8000 - 0xffff) */
-#define PDR_BASEBAND_REGISTERS 0x8000
-#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001
-
-/* used by our modificated eeprom image */
-#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD
-#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF
-#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D
-
-/* PDR definitions for default country & country list */
-#define PDR_COUNTRY_CERT_CODE 0x80
-#define PDR_COUNTRY_CERT_CODE_REAL 0x00
-#define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80
-#define PDR_COUNTRY_CERT_BAND 0x40
-#define PDR_COUNTRY_CERT_BAND_2GHZ 0x00
-#define PDR_COUNTRY_CERT_BAND_5GHZ 0x40
-#define PDR_COUNTRY_CERT_IODOOR 0x30
-#define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00
-#define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20
-#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30
-#define PDR_COUNTRY_CERT_INDEX 0x0F
-
-struct p54_eeprom_lm86 {
- union {
- struct {
- __le16 offset;
- __le16 len;
- u8 data[0];
- } v1;
- struct {
- __le32 offset;
- __le16 len;
- u8 magic2;
- u8 pad;
- u8 magic[4];
- u8 data[0];
- } v2;
- } __attribute__ ((packed));
-} __attribute__ ((packed));
-
-enum p54_rx_decrypt_status {
- P54_DECRYPT_NONE = 0,
- P54_DECRYPT_OK,
- P54_DECRYPT_NOKEY,
- P54_DECRYPT_NOMICHAEL,
- P54_DECRYPT_NOCKIPMIC,
- P54_DECRYPT_FAIL_WEP,
- P54_DECRYPT_FAIL_TKIP,
- P54_DECRYPT_FAIL_MICHAEL,
- P54_DECRYPT_FAIL_CKIPKP,
- P54_DECRYPT_FAIL_CKIPMIC,
- P54_DECRYPT_FAIL_AESCCMP
-};
-
-struct p54_rx_data {
- __le16 flags;
- __le16 len;
- __le16 freq;
- u8 antenna;
- u8 rate;
- u8 rssi;
- u8 quality;
- u8 decrypt_status;
- u8 rssi_raw;
- __le32 tsf32;
- __le32 unalloc0;
- u8 align[0];
-} __attribute__ ((packed));
-
-enum p54_trap_type {
- P54_TRAP_SCAN = 0,
- P54_TRAP_TIMER,
- P54_TRAP_BEACON_TX,
- P54_TRAP_FAA_RADIO_ON,
- P54_TRAP_FAA_RADIO_OFF,
- P54_TRAP_RADAR,
- P54_TRAP_NO_BEACON,
- P54_TRAP_TBTT,
- P54_TRAP_SCO_ENTER,
- P54_TRAP_SCO_EXIT
-};
-
-struct p54_trap {
- __le16 event;
- __le16 frequency;
-} __attribute__ ((packed));
-
-enum p54_frame_sent_status {
- P54_TX_OK = 0,
- P54_TX_FAILED,
- P54_TX_PSM,
- P54_TX_PSM_CANCELLED = 4
-};
-
-struct p54_frame_sent {
- u8 status;
- u8 tries;
- u8 ack_rssi;
- u8 quality;
- __le16 seq;
- u8 antenna;
- u8 padding;
-} __attribute__ ((packed));
-
-enum p54_tx_data_crypt {
- P54_CRYPTO_NONE = 0,
- P54_CRYPTO_WEP,
- P54_CRYPTO_TKIP,
- P54_CRYPTO_TKIPMICHAEL,
- P54_CRYPTO_CCX_WEPMIC,
- P54_CRYPTO_CCX_KPMIC,
- P54_CRYPTO_CCX_KP,
- P54_CRYPTO_AESCCMP
-};
-
-enum p54_tx_data_queue {
- P54_QUEUE_BEACON = 0,
- P54_QUEUE_FWSCAN = 1,
- P54_QUEUE_MGMT = 2,
- P54_QUEUE_CAB = 3,
- P54_QUEUE_DATA = 4,
-
- P54_QUEUE_AC_NUM = 4,
- P54_QUEUE_AC_VO = 4,
- P54_QUEUE_AC_VI = 5,
- P54_QUEUE_AC_BE = 6,
- P54_QUEUE_AC_BK = 7,
-
- /* keep last */
- P54_QUEUE_NUM = 8,
-};
-
-struct p54_tx_data {
- u8 rateset[8];
- u8 rts_rate_idx;
- u8 crypt_offset;
- u8 key_type;
- u8 key_len;
- u8 key[16];
- u8 hw_queue;
- u8 backlog;
- __le16 durations[4];
- u8 tx_antenna;
- union {
- struct {
- u8 cts_rate;
- __le16 output_power;
- } __attribute__((packed)) longbow;
- struct {
- u8 output_power;
- u8 cts_rate;
- u8 unalloc;
- } __attribute__ ((packed)) normal;
- } __attribute__ ((packed));
- u8 unalloc2[2];
- u8 align[0];
-} __attribute__ ((packed));
-
-/* unit is ms */
-#define P54_TX_FRAME_LIFETIME 2000
-#define P54_TX_TIMEOUT 4000
-#define P54_STATISTICS_UPDATE 5000
-
-#define P54_FILTER_TYPE_NONE 0
-#define P54_FILTER_TYPE_STATION BIT(0)
-#define P54_FILTER_TYPE_IBSS BIT(1)
-#define P54_FILTER_TYPE_AP BIT(2)
-#define P54_FILTER_TYPE_TRANSPARENT BIT(3)
-#define P54_FILTER_TYPE_PROMISCUOUS BIT(4)
-#define P54_FILTER_TYPE_HIBERNATE BIT(5)
-#define P54_FILTER_TYPE_NOACK BIT(6)
-#define P54_FILTER_TYPE_RX_DISABLED BIT(7)
-
-struct p54_setup_mac {
- __le16 mac_mode;
- u8 mac_addr[ETH_ALEN];
- u8 bssid[ETH_ALEN];
- u8 rx_antenna;
- u8 rx_align;
- union {
- struct {
- __le32 basic_rate_mask;
- u8 rts_rates[8];
- __le32 rx_addr;
- __le16 max_rx;
- __le16 rxhw;
- __le16 wakeup_timer;
- __le16 unalloc0;
- } v1 __attribute__ ((packed));
- struct {
- __le32 rx_addr;
- __le16 max_rx;
- __le16 rxhw;
- __le16 timer;
- __le16 truncate;
- __le32 basic_rate_mask;
- u8 sbss_offset;
- u8 mcast_window;
- u8 rx_rssi_threshold;
- u8 rx_ed_threshold;
- __le32 ref_clock;
- __le16 lpf_bandwidth;
- __le16 osc_start_delay;
- } v2 __attribute__ ((packed));
- } __attribute__ ((packed));
-} __attribute__ ((packed));
-
-#define P54_SETUP_V1_LEN 40
-#define P54_SETUP_V2_LEN (sizeof(struct p54_setup_mac))
-
-#define P54_SCAN_EXIT BIT(0)
-#define P54_SCAN_TRAP BIT(1)
-#define P54_SCAN_ACTIVE BIT(2)
-#define P54_SCAN_FILTER BIT(3)
-
-struct p54_scan_head {
- __le16 mode;
- __le16 dwell;
- u8 scan_params[20];
- __le16 freq;
-} __attribute__ ((packed));
-
-struct p54_scan_body {
- u8 pa_points_per_curve;
- u8 val_barker;
- u8 val_bpsk;
- u8 val_qpsk;
- u8 val_16qam;
- u8 val_64qam;
- struct p54_pa_curve_data_sample curve_data[8];
- u8 dup_bpsk;
- u8 dup_qpsk;
- u8 dup_16qam;
- u8 dup_64qam;
-} __attribute__ ((packed));
-
-struct p54_scan_body_longbow {
- struct p54_channel_output_limit_longbow power_limits;
- struct p54_pa_curve_data_sample_longbow curve_data[8];
- __le16 unkn[6]; /* maybe more power_limits or rate_mask */
-} __attribute__ ((packed));
-
-union p54_scan_body_union {
- struct p54_scan_body normal;
- struct p54_scan_body_longbow longbow;
-} __attribute__ ((packed));
-
-struct p54_scan_tail_rate {
- __le32 basic_rate_mask;
- u8 rts_rates[8];
-} __attribute__ ((packed));
-
-struct p54_led {
- __le16 flags;
- __le16 mask[2];
- __le16 delay[2];
-} __attribute__ ((packed));
-
-struct p54_edcf {
- u8 flags;
- u8 slottime;
- u8 sifs;
- u8 eofpad;
- struct p54_edcf_queue_param queue[8];
- u8 mapping[4];
- __le16 frameburst;
- __le16 round_trip_delay;
-} __attribute__ ((packed));
-
-struct p54_statistics {
- __le32 rx_success;
- __le32 rx_bad_fcs;
- __le32 rx_abort;
- __le32 rx_abort_phy;
- __le32 rts_success;
- __le32 rts_fail;
- __le32 tsf32;
- __le32 airtime;
- __le32 noise;
- __le32 sample_noise[8];
- __le32 sample_cca;
- __le32 sample_tx;
-} __attribute__ ((packed));
-
-struct p54_xbow_synth {
- __le16 magic1;
- __le16 magic2;
- __le16 freq;
- u32 padding[5];
-} __attribute__ ((packed));
-
-struct p54_timer {
- __le32 interval;
-} __attribute__ ((packed));
-
-struct p54_keycache {
- u8 entry;
- u8 key_id;
- u8 mac[ETH_ALEN];
- u8 padding[2];
- u8 key_type;
- u8 key_len;
- u8 key[24];
-} __attribute__ ((packed));
-
-struct p54_burst {
- u8 flags;
- u8 queue;
- u8 backlog;
- u8 pad;
- __le16 durations[32];
-} __attribute__ ((packed));
-
-struct p54_psm_interval {
- __le16 interval;
- __le16 periods;
-} __attribute__ ((packed));
-
-#define P54_PSM_CAM 0
-#define P54_PSM BIT(0)
-#define P54_PSM_DTIM BIT(1)
-#define P54_PSM_MCBC BIT(2)
-#define P54_PSM_CHECKSUM BIT(3)
-#define P54_PSM_SKIP_MORE_DATA BIT(4)
-#define P54_PSM_BEACON_TIMEOUT BIT(5)
-#define P54_PSM_HFOSLEEP BIT(6)
-#define P54_PSM_AUTOSWITCH_SLEEP BIT(7)
-#define P54_PSM_LPIT BIT(8)
-#define P54_PSM_BF_UCAST_SKIP BIT(9)
-#define P54_PSM_BF_MCAST_SKIP BIT(10)
-
-struct p54_psm {
- __le16 mode;
- __le16 aid;
- struct p54_psm_interval intervals[4];
- u8 beacon_rssi_skip_max;
- u8 rssi_delta_threshold;
- u8 nr;
- u8 exclude[1];
-} __attribute__ ((packed));
-
-#define MC_FILTER_ADDRESS_NUM 4
-
-struct p54_group_address_table {
- __le16 filter_enable;
- __le16 num_address;
- u8 mac_list[MC_FILTER_ADDRESS_NUM][ETH_ALEN];
-} __attribute__ ((packed));
-
-struct p54_txcancel {
- __le32 req_id;
-} __attribute__ ((packed));
-
-struct p54_sta_unlock {
- u8 addr[ETH_ALEN];
- u16 padding;
-} __attribute__ ((packed));
-
-#define P54_TIM_CLEAR BIT(15)
-struct p54_tim {
- u8 count;
- u8 padding[3];
- __le16 entry[8];
-} __attribute__ ((packed));
-
-struct p54_cce_quiet {
- __le32 period;
-} __attribute__ ((packed));
-
-struct p54_bt_balancer {
- __le16 prio_thresh;
- __le16 acl_thresh;
-} __attribute__ ((packed));
-
-struct p54_arp_table {
- __le16 filter_enable;
- u8 ipv4_addr[4];
-} __attribute__ ((packed));
-
-#endif /* P54COMMON_H */
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index b1610ea..d348c26 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -22,6 +22,7 @@
#include <net/mac80211.h>
#include "p54.h"
+#include "lmac.h"
#include "p54pci.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
@@ -564,7 +565,6 @@
err_free_common:
release_firmware(priv->firmware);
- p54_free_common(dev);
pci_free_consistent(pdev, sizeof(*priv->ring_control),
priv->ring_control, priv->ring_control_dma);
@@ -573,7 +573,7 @@
err_free_dev:
pci_set_drvdata(pdev, NULL);
- ieee80211_free_hw(dev);
+ p54_free_common(dev);
err_free_reg:
pci_release_regions(pdev);
@@ -590,16 +590,15 @@
if (!dev)
return;
- ieee80211_unregister_hw(dev);
+ p54_unregister_common(dev);
priv = dev->priv;
release_firmware(priv->firmware);
pci_free_consistent(pdev, sizeof(*priv->ring_control),
priv->ring_control, priv->ring_control_dma);
- p54_free_common(dev);
iounmap(priv->map);
pci_release_regions(pdev);
pci_disable_device(pdev);
- ieee80211_free_hw(dev);
+ p54_free_common(dev);
}
#ifdef CONFIG_PM
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 72c7dbd..05458d9 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -34,7 +34,7 @@
#include "p54spi_eeprom.h"
#include "p54.h"
-#include "p54common.h"
+#include "lmac.h"
MODULE_FIRMWARE("3826.arm");
MODULE_ALIAS("stlc45xx");
@@ -111,15 +111,6 @@
spi_sync(priv->spi, &m);
}
-static u16 p54spi_read16(struct p54s_priv *priv, u8 addr)
-{
- __le16 val;
-
- p54spi_spi_read(priv, addr, &val, sizeof(val));
-
- return le16_to_cpu(val);
-}
-
static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
{
__le32 val;
@@ -139,37 +130,12 @@
p54spi_spi_write(priv, addr, &val, sizeof(val));
}
-struct p54spi_spi_reg {
- u16 address; /* __le16 ? */
- u16 length;
- char *name;
-};
-
-static const struct p54spi_spi_reg p54spi_registers_array[] =
-{
- { SPI_ADRS_ARM_INTERRUPTS, 32, "ARM_INT " },
- { SPI_ADRS_ARM_INT_EN, 32, "ARM_INT_ENA " },
- { SPI_ADRS_HOST_INTERRUPTS, 32, "HOST_INT " },
- { SPI_ADRS_HOST_INT_EN, 32, "HOST_INT_ENA" },
- { SPI_ADRS_HOST_INT_ACK, 32, "HOST_INT_ACK" },
- { SPI_ADRS_GEN_PURP_1, 32, "GP1_COMM " },
- { SPI_ADRS_GEN_PURP_2, 32, "GP2_COMM " },
- { SPI_ADRS_DEV_CTRL_STAT, 32, "DEV_CTRL_STA" },
- { SPI_ADRS_DMA_DATA, 16, "DMA_DATA " },
- { SPI_ADRS_DMA_WRITE_CTRL, 16, "DMA_WR_CTRL " },
- { SPI_ADRS_DMA_WRITE_LEN, 16, "DMA_WR_LEN " },
- { SPI_ADRS_DMA_WRITE_BASE, 32, "DMA_WR_BASE " },
- { SPI_ADRS_DMA_READ_CTRL, 16, "DMA_RD_CTRL " },
- { SPI_ADRS_DMA_READ_LEN, 16, "DMA_RD_LEN " },
- { SPI_ADRS_DMA_WRITE_BASE, 32, "DMA_RD_BASE " }
-};
-
-static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, __le32 bits)
+static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
{
int i;
for (i = 0; i < 2000; i++) {
- __le32 buffer = p54spi_read32(priv, reg);
+ u32 buffer = p54spi_read32(priv, reg);
if ((buffer & bits) == bits)
return 1;
}
@@ -179,8 +145,7 @@
static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
const void *buf, size_t len)
{
- if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL,
- cpu_to_le32(HOST_ALLOWED))) {
+ if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
dev_err(&priv->spi->dev, "spi_write_dma not allowed "
"to DMA write.\n");
return -EAGAIN;
@@ -333,7 +298,7 @@
/* And wait for the READY interrupt */
if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
- cpu_to_le32(SPI_HOST_INT_READY))) {
+ SPI_HOST_INT_READY)) {
dev_err(&priv->spi->dev, "INT_READY timeout\n");
return -EBUSY;
}
@@ -426,7 +391,7 @@
struct spi_device *spi = config;
struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
- queue_work(priv->hw->workqueue, &priv->work);
+ ieee80211_queue_work(priv->hw, &priv->work);
return IRQ_HANDLED;
}
@@ -444,7 +409,7 @@
goto out;
if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
- cpu_to_le32(SPI_HOST_INT_WR_READY))) {
+ SPI_HOST_INT_WR_READY)) {
dev_err(&priv->spi->dev, "WR_READY timeout\n");
ret = -EAGAIN;
goto out;
@@ -514,7 +479,7 @@
list_add_tail(&di->tx_list, &priv->tx_pending);
spin_unlock_irqrestore(&priv->tx_lock, flags);
- queue_work(priv->hw->workqueue, &priv->work);
+ ieee80211_queue_work(priv->hw, &priv->work);
}
static void p54spi_work(struct work_struct *work)
@@ -713,7 +678,7 @@
{
struct p54s_priv *priv = dev_get_drvdata(&spi->dev);
- ieee80211_unregister_hw(priv->hw);
+ p54_unregister_common(priv->hw);
free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
@@ -724,7 +689,6 @@
mutex_destroy(&priv->mutex);
p54_free_common(priv->hw);
- ieee80211_free_hw(priv->hw);
return 0;
}
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 0e877a1..e44460f 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -22,6 +22,7 @@
#include <net/mac80211.h>
#include "p54.h"
+#include "lmac.h"
#include "p54usb.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
@@ -245,8 +246,10 @@
struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
data_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!data_urb)
+ if (!data_urb) {
+ p54_free_skb(dev, skb);
return;
+ }
hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
@@ -268,27 +271,22 @@
static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct p54u_priv *priv = dev->priv;
- struct urb *int_urb, *data_urb;
+ struct urb *int_urb = NULL, *data_urb = NULL;
struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
- struct net2280_reg_write *reg;
- int err = 0;
+ struct net2280_reg_write *reg = NULL;
+ int err = -ENOMEM;
reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
if (!reg)
- return;
+ goto out;
int_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!int_urb) {
- kfree(reg);
- return;
- }
+ if (!int_urb)
+ goto out;
data_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!data_urb) {
- kfree(reg);
- usb_free_urb(int_urb);
- return;
- }
+ if (!data_urb)
+ goto out;
reg->port = cpu_to_le16(NET2280_DEV_U32);
reg->addr = cpu_to_le32(P54U_DEV_BASE);
@@ -303,11 +301,12 @@
p54u_tx_dummy_cb, dev);
/*
- * This flag triggers a code path in the USB subsystem that will
- * free what's inside the transfer_buffer after the callback routine
- * has completed.
+ * URB_FREE_BUFFER triggers a code path in the USB subsystem that will
+ * free what is inside the transfer_buffer after the last reference to
+ * the int_urb is dropped.
*/
int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
+ reg = NULL;
usb_fill_bulk_urb(data_urb, priv->udev,
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
@@ -328,12 +327,12 @@
usb_unanchor_urb(data_urb);
goto out;
}
- out:
+out:
usb_free_urb(int_urb);
usb_free_urb(data_urb);
if (err) {
- skb_pull(skb, sizeof(*hdr));
+ kfree(reg);
p54_free_skb(dev, skb);
}
}
@@ -961,7 +960,7 @@
release_firmware(priv->fw);
err_free_dev:
- ieee80211_free_hw(dev);
+ p54_free_common(dev);
usb_set_intfdata(intf, NULL);
usb_put_dev(udev);
return err;
@@ -975,13 +974,12 @@
if (!dev)
return;
- ieee80211_unregister_hw(dev);
+ p54_unregister_common(dev);
priv = dev->priv;
usb_put_dev(interface_to_usbdev(intf));
release_firmware(priv->fw);
p54_free_common(dev);
- ieee80211_free_hw(dev);
}
static int p54u_pre_reset(struct usb_interface *intf)
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
new file mode 100644
index 0000000..b6dda2b
--- /dev/null
+++ b/drivers/net/wireless/p54/txrx.c
@@ -0,0 +1,869 @@
+/*
+ * Common code for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ * - stlc45xx driver
+ * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "lmac.h"
+
+#ifdef P54_MM_DEBUG
+static void p54_dump_tx_queue(struct p54_common *priv)
+{
+ unsigned long flags;
+ struct ieee80211_tx_info *info;
+ struct p54_tx_info *range;
+ struct sk_buff *skb;
+ struct p54_hdr *hdr;
+ unsigned int i = 0;
+ u32 prev_addr;
+ u32 largest_hole = 0, free;
+
+ spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) --- \n",
+ wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
+
+ prev_addr = priv->rx_start;
+ skb_queue_walk(&priv->tx_queue, skb) {
+ info = IEEE80211_SKB_CB(skb);
+ range = (void *) info->rate_driver_data;
+ hdr = (void *) skb->data;
+
+ free = range->start_addr - prev_addr;
+ printk(KERN_DEBUG "%s: | [%02d] => [skb:%p skb_len:0x%04x "
+ "hdr:{flags:%02x len:%04x req_id:%04x type:%02x} "
+ "mem:{start:%04x end:%04x, free:%d}]\n",
+ wiphy_name(priv->hw->wiphy), i++, skb, skb->len,
+ le16_to_cpu(hdr->flags), le16_to_cpu(hdr->len),
+ le32_to_cpu(hdr->req_id), le16_to_cpu(hdr->type),
+ range->start_addr, range->end_addr, free);
+
+ prev_addr = range->end_addr;
+ largest_hole = max(largest_hole, free);
+ }
+ free = priv->rx_end - prev_addr;
+ largest_hole = max(largest_hole, free);
+ printk(KERN_DEBUG "%s: \\ --- [free: %d], largest free block: %d ---\n",
+ wiphy_name(priv->hw->wiphy), free, largest_hole);
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+}
+#endif /* P54_MM_DEBUG */
+
+/*
+ * So, the firmware is somewhat stupid and doesn't know what places in its
+ * memory incoming data should go to. By poking around in the firmware, we
+ * can find some unused memory to upload our packets to. However, data that we
+ * want the card to TX needs to stay intact until the card has told us that
+ * it is done with it. This function finds empty places we can upload to and
+ * marks allocated areas as reserved if necessary. p54_find_and_unlink_skb or
+ * p54_free_skb frees allocated areas.
+ */
+static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct sk_buff *entry, *target_skb = NULL;
+ struct ieee80211_tx_info *info;
+ struct p54_tx_info *range;
+ struct p54_hdr *data = (void *) skb->data;
+ unsigned long flags;
+ u32 last_addr = priv->rx_start;
+ u32 target_addr = priv->rx_start;
+ u16 len = priv->headroom + skb->len + priv->tailroom + 3;
+
+ info = IEEE80211_SKB_CB(skb);
+ range = (void *) info->rate_driver_data;
+ len = (range->extra_len + len) & ~0x3;
+
+ spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ if (unlikely(skb_queue_len(&priv->tx_queue) == 32)) {
+ /*
+ * The tx_queue is now really full.
+ *
+ * TODO: check if the device has crashed and reset it.
+ */
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ return -EBUSY;
+ }
+
+ skb_queue_walk(&priv->tx_queue, entry) {
+ u32 hole_size;
+ info = IEEE80211_SKB_CB(entry);
+ range = (void *) info->rate_driver_data;
+ hole_size = range->start_addr - last_addr;
+
+ if (!target_skb && hole_size >= len) {
+ target_skb = entry->prev;
+ hole_size -= len;
+ target_addr = last_addr;
+ break;
+ }
+ last_addr = range->end_addr;
+ }
+ if (unlikely(!target_skb)) {
+ if (priv->rx_end - last_addr >= len) {
+ target_skb = priv->tx_queue.prev;
+ if (!skb_queue_empty(&priv->tx_queue)) {
+ info = IEEE80211_SKB_CB(target_skb);
+ range = (void *)info->rate_driver_data;
+ target_addr = range->end_addr;
+ }
+ } else {
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ return -ENOSPC;
+ }
+ }
+
+ info = IEEE80211_SKB_CB(skb);
+ range = (void *) info->rate_driver_data;
+ range->start_addr = target_addr;
+ range->end_addr = target_addr + len;
+ data->req_id = cpu_to_le32(target_addr + priv->headroom);
+ if (IS_DATA_FRAME(skb) &&
+ unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON))
+ priv->beacon_req_id = data->req_id;
+
+ __skb_queue_after(&priv->tx_queue, target_skb, skb);
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ return 0;
+}
+
+static void p54_tx_pending(struct p54_common *priv)
+{
+ struct sk_buff *skb;
+ int ret;
+
+ skb = skb_dequeue(&priv->tx_pending);
+ if (unlikely(!skb))
+ return ;
+
+ ret = p54_assign_address(priv, skb);
+ if (unlikely(ret))
+ skb_queue_head(&priv->tx_pending, skb);
+ else
+ priv->tx(priv->hw, skb);
+}
+
+static void p54_wake_queues(struct p54_common *priv)
+{
+ unsigned long flags;
+ unsigned int i;
+
+ if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+ return ;
+
+ p54_tx_pending(priv);
+
+ spin_lock_irqsave(&priv->tx_stats_lock, flags);
+ for (i = 0; i < priv->hw->queues; i++) {
+ if (priv->tx_stats[i + P54_QUEUE_DATA].len <
+ priv->tx_stats[i + P54_QUEUE_DATA].limit)
+ ieee80211_wake_queue(priv->hw, i);
+ }
+ spin_unlock_irqrestore(&priv->tx_stats_lock, flags);
+}
+
+static int p54_tx_qos_accounting_alloc(struct p54_common *priv,
+ struct sk_buff *skb,
+ const u16 p54_queue)
+{
+ struct ieee80211_tx_queue_stats *queue;
+ unsigned long flags;
+
+ if (WARN_ON(p54_queue > P54_QUEUE_NUM))
+ return -EINVAL;
+
+ queue = &priv->tx_stats[p54_queue];
+
+ spin_lock_irqsave(&priv->tx_stats_lock, flags);
+ if (unlikely(queue->len >= queue->limit && IS_QOS_QUEUE(p54_queue))) {
+ spin_unlock_irqrestore(&priv->tx_stats_lock, flags);
+ return -ENOSPC;
+ }
+
+ queue->len++;
+ queue->count++;
+
+ if (unlikely(queue->len == queue->limit && IS_QOS_QUEUE(p54_queue))) {
+ u16 ac_queue = p54_queue - P54_QUEUE_DATA;
+ ieee80211_stop_queue(priv->hw, ac_queue);
+ }
+
+ spin_unlock_irqrestore(&priv->tx_stats_lock, flags);
+ return 0;
+}
+
+static void p54_tx_qos_accounting_free(struct p54_common *priv,
+ struct sk_buff *skb)
+{
+ if (IS_DATA_FRAME(skb)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_stats_lock, flags);
+ priv->tx_stats[GET_HW_QUEUE(skb)].len--;
+ spin_unlock_irqrestore(&priv->tx_stats_lock, flags);
+
+ if (unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON)) {
+ if (priv->beacon_req_id == GET_REQ_ID(skb)) {
+ /* this is the active beacon set anymore */
+ priv->beacon_req_id = 0;
+ }
+ complete(&priv->beacon_comp);
+ }
+ }
+ p54_wake_queues(priv);
+}
+
+void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54_common *priv = dev->priv;
+ if (unlikely(!skb))
+ return ;
+
+ skb_unlink(skb, &priv->tx_queue);
+ p54_tx_qos_accounting_free(priv, skb);
+ dev_kfree_skb_any(skb);
+}
+EXPORT_SYMBOL_GPL(p54_free_skb);
+
+static struct sk_buff *p54_find_and_unlink_skb(struct p54_common *priv,
+ const __le32 req_id)
+{
+ struct sk_buff *entry;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ skb_queue_walk(&priv->tx_queue, entry) {
+ struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
+
+ if (hdr->req_id == req_id) {
+ __skb_unlink(entry, &priv->tx_queue);
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ p54_tx_qos_accounting_free(priv, entry);
+ return entry;
+ }
+ }
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ return NULL;
+}
+
+void p54_tx(struct p54_common *priv, struct sk_buff *skb)
+{
+ skb_queue_tail(&priv->tx_pending, skb);
+ p54_tx_pending(priv);
+}
+
+static int p54_rssi_to_dbm(struct p54_common *priv, int rssi)
+{
+ int band = priv->hw->conf.channel->band;
+
+ if (priv->rxhw != 5)
+ return ((rssi * priv->rssical_db[band].mul) / 64 +
+ priv->rssical_db[band].add) / 4;
+ else
+ /*
+ * TODO: find the correct formula
+ */
+ return ((rssi * priv->rssical_db[band].mul) / 64 +
+ priv->rssical_db[band].add) / 4;
+}
+
+/*
+ * Even if the firmware is capable of dealing with incoming traffic,
+ * while dozing, we have to prepared in case mac80211 uses PS-POLL
+ * to retrieve outstanding frames from our AP.
+ * (see comment in net/mac80211/mlme.c @ line 1993)
+ */
+static void p54_pspoll_workaround(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (void *) skb->data;
+ struct ieee80211_tim_ie *tim_ie;
+ u8 *tim;
+ u8 tim_len;
+ bool new_psm;
+
+ /* only beacons have a TIM IE */
+ if (!ieee80211_is_beacon(hdr->frame_control))
+ return;
+
+ if (!priv->aid)
+ return;
+
+ /* only consider beacons from the associated BSSID */
+ if (compare_ether_addr(hdr->addr3, priv->bssid))
+ return;
+
+ tim = p54_find_ie(skb, WLAN_EID_TIM);
+ if (!tim)
+ return;
+
+ tim_len = tim[1];
+ tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+ new_psm = ieee80211_check_tim(tim_ie, tim_len, priv->aid);
+ if (new_psm != priv->powersave_override) {
+ priv->powersave_override = new_psm;
+ p54_set_ps(priv);
+ }
+}
+
+static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct p54_rx_data *hdr = (struct p54_rx_data *) skb->data;
+ struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+ u16 freq = le16_to_cpu(hdr->freq);
+ size_t header_len = sizeof(*hdr);
+ u32 tsf32;
+ u8 rate = hdr->rate & 0xf;
+
+ /*
+ * If the device is in a unspecified state we have to
+ * ignore all data frames. Else we could end up with a
+ * nasty crash.
+ */
+ if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+ return 0;
+
+ if (!(hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_IN_FCS_GOOD)))
+ return 0;
+
+ if (hdr->decrypt_status == P54_DECRYPT_OK)
+ rx_status->flag |= RX_FLAG_DECRYPTED;
+ if ((hdr->decrypt_status == P54_DECRYPT_FAIL_MICHAEL) ||
+ (hdr->decrypt_status == P54_DECRYPT_FAIL_TKIP))
+ rx_status->flag |= RX_FLAG_MMIC_ERROR;
+
+ rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi);
+ rx_status->noise = priv->noise;
+ if (hdr->rate & 0x10)
+ rx_status->flag |= RX_FLAG_SHORTPRE;
+ if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ)
+ rx_status->rate_idx = (rate < 4) ? 0 : rate - 4;
+ else
+ rx_status->rate_idx = rate;
+
+ rx_status->freq = freq;
+ rx_status->band = priv->hw->conf.channel->band;
+ rx_status->antenna = hdr->antenna;
+
+ tsf32 = le32_to_cpu(hdr->tsf32);
+ if (tsf32 < priv->tsf_low32)
+ priv->tsf_high32++;
+ rx_status->mactime = ((u64)priv->tsf_high32) << 32 | tsf32;
+ priv->tsf_low32 = tsf32;
+
+ rx_status->flag |= RX_FLAG_TSFT;
+
+ if (hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
+ header_len += hdr->align[0];
+
+ skb_pull(skb, header_len);
+ skb_trim(skb, le16_to_cpu(hdr->len));
+ if (unlikely(priv->hw->conf.flags & IEEE80211_CONF_PS))
+ p54_pspoll_workaround(priv, skb);
+
+ ieee80211_rx_irqsafe(priv->hw, skb);
+
+ ieee80211_queue_delayed_work(priv->hw, &priv->work,
+ msecs_to_jiffies(P54_STATISTICS_UPDATE));
+
+ return -1;
+}
+
+static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+ struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
+ struct ieee80211_tx_info *info;
+ struct p54_hdr *entry_hdr;
+ struct p54_tx_data *entry_data;
+ struct sk_buff *entry;
+ unsigned int pad = 0, frame_len;
+ int count, idx;
+
+ entry = p54_find_and_unlink_skb(priv, hdr->req_id);
+ if (unlikely(!entry))
+ return ;
+
+ frame_len = entry->len;
+ info = IEEE80211_SKB_CB(entry);
+ entry_hdr = (struct p54_hdr *) entry->data;
+ entry_data = (struct p54_tx_data *) entry_hdr->data;
+ priv->stats.dot11ACKFailureCount += payload->tries - 1;
+
+ /*
+ * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
+ * generated by the driver. Therefore tx_status is bogus
+ * and we don't want to confuse the mac80211 stack.
+ */
+ if (unlikely(entry_data->hw_queue < P54_QUEUE_FWSCAN)) {
+ dev_kfree_skb_any(entry);
+ return ;
+ }
+
+ /*
+ * Clear manually, ieee80211_tx_info_clear_status would
+ * clear the counts too and we need them.
+ */
+ memset(&info->status.ampdu_ack_len, 0,
+ sizeof(struct ieee80211_tx_info) -
+ offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+ BUILD_BUG_ON(offsetof(struct ieee80211_tx_info,
+ status.ampdu_ack_len) != 23);
+
+ if (entry_hdr->flags & cpu_to_le16(P54_HDR_FLAG_DATA_ALIGN))
+ pad = entry_data->align[0];
+
+ /* walk through the rates array and adjust the counts */
+ count = payload->tries;
+ for (idx = 0; idx < 4; idx++) {
+ if (count >= info->status.rates[idx].count) {
+ count -= info->status.rates[idx].count;
+ } else if (count > 0) {
+ info->status.rates[idx].count = count;
+ count = 0;
+ } else {
+ info->status.rates[idx].idx = -1;
+ info->status.rates[idx].count = 0;
+ }
+ }
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (!payload->status))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ if (payload->status & P54_TX_PSM_CANCELLED)
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ info->status.ack_signal = p54_rssi_to_dbm(priv,
+ (int)payload->ack_rssi);
+
+ /* Undo all changes to the frame. */
+ switch (entry_data->key_type) {
+ case P54_CRYPTO_TKIPMICHAEL: {
+ u8 *iv = (u8 *)(entry_data->align + pad +
+ entry_data->crypt_offset);
+
+ /* Restore the original TKIP IV. */
+ iv[2] = iv[0];
+ iv[0] = iv[1];
+ iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */
+
+ frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
+ break;
+ }
+ case P54_CRYPTO_AESCCMP:
+ frame_len -= 8; /* remove CCMP_MIC */
+ break;
+ case P54_CRYPTO_WEP:
+ frame_len -= 4; /* remove WEP_ICV */
+ break;
+ }
+
+ skb_trim(entry, frame_len);
+ skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
+ ieee80211_tx_status_irqsafe(priv->hw, entry);
+}
+
+static void p54_rx_eeprom_readback(struct p54_common *priv,
+ struct sk_buff *skb)
+{
+ struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+ struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data;
+ struct sk_buff *tmp;
+
+ if (!priv->eeprom)
+ return ;
+
+ if (priv->fw_var >= 0x509) {
+ memcpy(priv->eeprom, eeprom->v2.data,
+ le16_to_cpu(eeprom->v2.len));
+ } else {
+ memcpy(priv->eeprom, eeprom->v1.data,
+ le16_to_cpu(eeprom->v1.len));
+ }
+
+ priv->eeprom = NULL;
+ tmp = p54_find_and_unlink_skb(priv, hdr->req_id);
+ dev_kfree_skb_any(tmp);
+ complete(&priv->eeprom_comp);
+}
+
+static void p54_rx_stats(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+ struct p54_statistics *stats = (struct p54_statistics *) hdr->data;
+ struct sk_buff *tmp;
+ u32 tsf32;
+
+ if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+ return ;
+
+ tsf32 = le32_to_cpu(stats->tsf32);
+ if (tsf32 < priv->tsf_low32)
+ priv->tsf_high32++;
+ priv->tsf_low32 = tsf32;
+
+ priv->stats.dot11RTSFailureCount = le32_to_cpu(stats->rts_fail);
+ priv->stats.dot11RTSSuccessCount = le32_to_cpu(stats->rts_success);
+ priv->stats.dot11FCSErrorCount = le32_to_cpu(stats->rx_bad_fcs);
+
+ priv->noise = p54_rssi_to_dbm(priv, le32_to_cpu(stats->noise));
+
+ tmp = p54_find_and_unlink_skb(priv, hdr->req_id);
+ dev_kfree_skb_any(tmp);
+}
+
+static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+ struct p54_trap *trap = (struct p54_trap *) hdr->data;
+ u16 event = le16_to_cpu(trap->event);
+ u16 freq = le16_to_cpu(trap->frequency);
+
+ switch (event) {
+ case P54_TRAP_BEACON_TX:
+ break;
+ case P54_TRAP_RADAR:
+ printk(KERN_INFO "%s: radar (freq:%d MHz)\n",
+ wiphy_name(priv->hw->wiphy), freq);
+ break;
+ case P54_TRAP_NO_BEACON:
+ if (priv->vif)
+ ieee80211_beacon_loss(priv->vif);
+ break;
+ case P54_TRAP_SCAN:
+ break;
+ case P54_TRAP_TBTT:
+ break;
+ case P54_TRAP_TIMER:
+ break;
+ case P54_TRAP_FAA_RADIO_OFF:
+ wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
+ break;
+ case P54_TRAP_FAA_RADIO_ON:
+ wiphy_rfkill_set_hw_state(priv->hw->wiphy, false);
+ break;
+ default:
+ printk(KERN_INFO "%s: received event:%x freq:%d\n",
+ wiphy_name(priv->hw->wiphy), event, freq);
+ break;
+ }
+}
+
+static int p54_rx_control(struct p54_common *priv, struct sk_buff *skb)
+{
+ struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
+
+ switch (le16_to_cpu(hdr->type)) {
+ case P54_CONTROL_TYPE_TXDONE:
+ p54_rx_frame_sent(priv, skb);
+ break;
+ case P54_CONTROL_TYPE_TRAP:
+ p54_rx_trap(priv, skb);
+ break;
+ case P54_CONTROL_TYPE_BBP:
+ break;
+ case P54_CONTROL_TYPE_STAT_READBACK:
+ p54_rx_stats(priv, skb);
+ break;
+ case P54_CONTROL_TYPE_EEPROM_READBACK:
+ p54_rx_eeprom_readback(priv, skb);
+ break;
+ default:
+ printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
+ wiphy_name(priv->hw->wiphy), le16_to_cpu(hdr->type));
+ break;
+ }
+ return 0;
+}
+
+/* returns zero if skb can be reused */
+int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54_common *priv = dev->priv;
+ u16 type = le16_to_cpu(*((__le16 *)skb->data));
+
+ if (type & P54_HDR_FLAG_CONTROL)
+ return p54_rx_control(priv, skb);
+ else
+ return p54_rx_data(priv, skb);
+}
+EXPORT_SYMBOL_GPL(p54_rx);
+
+static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
+ struct ieee80211_tx_info *info, u8 *queue,
+ u32 *extra_len, u16 *flags, u16 *aid,
+ bool *burst_possible)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ if (ieee80211_is_data_qos(hdr->frame_control))
+ *burst_possible = true;
+ else
+ *burst_possible = false;
+
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+ *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
+
+ if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)
+ *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+
+ if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
+ *flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+
+ *queue = skb_get_queue_mapping(skb) + P54_QUEUE_DATA;
+
+ switch (priv->mode) {
+ case NL80211_IFTYPE_MONITOR:
+ /*
+ * We have to set P54_HDR_FLAG_DATA_OUT_PROMISC for
+ * every frame in promiscuous/monitor mode.
+ * see STSW45x0C LMAC API - page 12.
+ */
+ *aid = 0;
+ *flags |= P54_HDR_FLAG_DATA_OUT_PROMISC;
+ break;
+ case NL80211_IFTYPE_STATION:
+ *aid = 1;
+ break;
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
+ *aid = 0;
+ *queue = P54_QUEUE_CAB;
+ return;
+ }
+
+ if (unlikely(ieee80211_is_mgmt(hdr->frame_control))) {
+ if (ieee80211_is_probe_resp(hdr->frame_control)) {
+ *aid = 0;
+ *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP |
+ P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+ return;
+ } else if (ieee80211_is_beacon(hdr->frame_control)) {
+ *aid = 0;
+
+ if (info->flags & IEEE80211_TX_CTL_INJECTED) {
+ /*
+ * Injecting beacons on top of a AP is
+ * not a good idea... nevertheless,
+ * it should be doable.
+ */
+
+ return;
+ }
+
+ *flags |= P54_HDR_FLAG_DATA_OUT_TIMESTAMP;
+ *queue = P54_QUEUE_BEACON;
+ *extra_len = IEEE80211_MAX_TIM_LEN;
+ return;
+ }
+ }
+
+ if (info->control.sta)
+ *aid = info->control.sta->aid;
+ break;
+ }
+}
+
+static u8 p54_convert_algo(enum ieee80211_key_alg alg)
+{
+ switch (alg) {
+ case ALG_WEP:
+ return P54_CRYPTO_WEP;
+ case ALG_TKIP:
+ return P54_CRYPTO_TKIPMICHAEL;
+ case ALG_CCMP:
+ return P54_CRYPTO_AESCCMP;
+ default:
+ return 0;
+ }
+}
+
+int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54_common *priv = dev->priv;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct p54_tx_info *p54info;
+ struct p54_hdr *hdr;
+ struct p54_tx_data *txhdr;
+ unsigned int padding, len, extra_len;
+ int i, j, ridx;
+ u16 hdr_flags = 0, aid = 0;
+ u8 rate, queue = 0, crypt_offset = 0;
+ u8 cts_rate = 0x20;
+ u8 rc_flags;
+ u8 calculated_tries[4];
+ u8 nrates = 0, nremaining = 8;
+ bool burst_allowed = false;
+
+ p54_tx_80211_header(priv, skb, info, &queue, &extra_len,
+ &hdr_flags, &aid, &burst_allowed);
+
+ if (p54_tx_qos_accounting_alloc(priv, skb, queue)) {
+ if (!IS_QOS_QUEUE(queue)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ } else {
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
+ len = skb->len;
+
+ if (info->control.hw_key) {
+ crypt_offset = ieee80211_get_hdrlen_from_skb(skb);
+ if (info->control.hw_key->alg == ALG_TKIP) {
+ u8 *iv = (u8 *)(skb->data + crypt_offset);
+ /*
+ * The firmware excepts that the IV has to have
+ * this special format
+ */
+ iv[1] = iv[0];
+ iv[0] = iv[2];
+ iv[2] = 0;
+ }
+ }
+
+ txhdr = (struct p54_tx_data *) skb_push(skb, sizeof(*txhdr) + padding);
+ hdr = (struct p54_hdr *) skb_push(skb, sizeof(*hdr));
+
+ if (padding)
+ hdr_flags |= P54_HDR_FLAG_DATA_ALIGN;
+ hdr->type = cpu_to_le16(aid);
+ hdr->rts_tries = info->control.rates[0].count;
+
+ /*
+ * we register the rates in perfect order, and
+ * RTS/CTS won't happen on 5 GHz
+ */
+ cts_rate = info->control.rts_cts_rate_idx;
+
+ memset(&txhdr->rateset, 0, sizeof(txhdr->rateset));
+
+ /* see how many rates got used */
+ for (i = 0; i < dev->max_rates; i++) {
+ if (info->control.rates[i].idx < 0)
+ break;
+ nrates++;
+ }
+
+ /* limit tries to 8/nrates per rate */
+ for (i = 0; i < nrates; i++) {
+ /*
+ * The magic expression here is equivalent to 8/nrates for
+ * all values that matter, but avoids division and jumps.
+ * Note that nrates can only take the values 1 through 4.
+ */
+ calculated_tries[i] = min_t(int, ((15 >> nrates) | 1) + 1,
+ info->control.rates[i].count);
+ nremaining -= calculated_tries[i];
+ }
+
+ /* if there are tries left, distribute from back to front */
+ for (i = nrates - 1; nremaining > 0 && i >= 0; i--) {
+ int tmp = info->control.rates[i].count - calculated_tries[i];
+
+ if (tmp <= 0)
+ continue;
+ /* RC requested more tries at this rate */
+
+ tmp = min_t(int, tmp, nremaining);
+ calculated_tries[i] += tmp;
+ nremaining -= tmp;
+ }
+
+ ridx = 0;
+ for (i = 0; i < nrates && ridx < 8; i++) {
+ /* we register the rates in perfect order */
+ rate = info->control.rates[i].idx;
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate += 4;
+
+ /* store the count we actually calculated for TX status */
+ info->control.rates[i].count = calculated_tries[i];
+
+ rc_flags = info->control.rates[i].flags;
+ if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) {
+ rate |= 0x10;
+ cts_rate |= 0x10;
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ burst_allowed = false;
+ rate |= 0x40;
+ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ rate |= 0x20;
+ burst_allowed = false;
+ }
+ for (j = 0; j < calculated_tries[i] && ridx < 8; j++) {
+ txhdr->rateset[ridx] = rate;
+ ridx++;
+ }
+ }
+
+ if (burst_allowed)
+ hdr_flags |= P54_HDR_FLAG_DATA_OUT_BURST;
+
+ /* TODO: enable bursting */
+ hdr->flags = cpu_to_le16(hdr_flags);
+ hdr->tries = ridx;
+ txhdr->rts_rate_idx = 0;
+ if (info->control.hw_key) {
+ txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
+ txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
+ memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
+ if (info->control.hw_key->alg == ALG_TKIP) {
+ /* reserve space for the MIC key */
+ len += 8;
+ memcpy(skb_put(skb, 8), &(info->control.hw_key->key
+ [NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY]), 8);
+ }
+ /* reserve some space for ICV */
+ len += info->control.hw_key->icv_len;
+ memset(skb_put(skb, info->control.hw_key->icv_len), 0,
+ info->control.hw_key->icv_len);
+ } else {
+ txhdr->key_type = 0;
+ txhdr->key_len = 0;
+ }
+ txhdr->crypt_offset = crypt_offset;
+ txhdr->hw_queue = queue;
+ txhdr->backlog = priv->tx_stats[queue].len - 1;
+ memset(txhdr->durations, 0, sizeof(txhdr->durations));
+ txhdr->tx_antenna = ((info->antenna_sel_tx == 0) ?
+ 2 : info->antenna_sel_tx - 1) & priv->tx_diversity_mask;
+ if (priv->rxhw == 5) {
+ txhdr->longbow.cts_rate = cts_rate;
+ txhdr->longbow.output_power = cpu_to_le16(priv->output_power);
+ } else {
+ txhdr->normal.output_power = priv->output_power;
+ txhdr->normal.cts_rate = cts_rate;
+ }
+ if (padding)
+ txhdr->align[0] = padding;
+
+ hdr->len = cpu_to_le16(len);
+ /* modifies skb->cb and with it info, so must be last! */
+ p54info = (void *) info->rate_driver_data;
+ p54info->extra_len = extra_len;
+
+ p54_tx(priv, skb);
+ return NETDEV_TX_OK;
+}
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 8f62109..872b647 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -50,7 +50,7 @@
/* check for holes in the arrays caused by multi fragment frames
* searching for the last fragment of a frame */
- if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) {
+ if (priv->pci_map_tx_address[index]) {
/* entry is the last fragment of a frame
* free the skb structure and unmap pci memory */
skb = priv->data_low_tx[index];
@@ -72,7 +72,7 @@
}
}
-int
+netdev_tx_t
islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
{
islpci_private *priv = netdev_priv(ndev);
@@ -234,7 +234,7 @@
/* unlock the driver code */
spin_unlock_irqrestore(&priv->slock, flags);
- return 0;
+ return NETDEV_TX_OK;
drop_free:
ndev->stats.tx_dropped++;
@@ -450,7 +450,7 @@
pci_map_single(priv->pdev, (void *) skb->data,
MAX_FRAGMENT_SIZE_RX + 2,
PCI_DMA_FROMDEVICE);
- if (unlikely(priv->pci_map_rx_address[index] == (dma_addr_t) NULL)) {
+ if (unlikely(!priv->pci_map_rx_address[index])) {
/* error mapping the buffer to device accessable memory address */
DEBUG(SHOW_ERROR_MESSAGES,
"Error mapping DMA address\n");
diff --git a/drivers/net/wireless/prism54/islpci_eth.h b/drivers/net/wireless/prism54/islpci_eth.h
index 61454d3..54f9a4b 100644
--- a/drivers/net/wireless/prism54/islpci_eth.h
+++ b/drivers/net/wireless/prism54/islpci_eth.h
@@ -64,7 +64,7 @@
};
void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *);
-int islpci_eth_transmit(struct sk_buff *, struct net_device *);
+netdev_tx_t islpci_eth_transmit(struct sk_buff *, struct net_device *);
int islpci_eth_receive(islpci_private *);
void islpci_eth_tx_timeout(struct net_device *);
void islpci_do_reset_and_wake(struct work_struct *);
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 3087672..83d3662 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -49,9 +49,7 @@
/* 3COM 3CRWE154G72 Wireless LAN adapter */
{
- 0x10b7, 0x6001,
- PCI_ANY_ID, PCI_ANY_ID,
- 0, 0, 0
+ PCI_VDEVICE(3COM, 0x6001), 0
},
/* Intersil PRISM Indigo Wireless LAN adapter */
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 698b11b..88cd58e 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -104,7 +104,8 @@
static const struct ethtool_ops netdev_ethtool_ops;
static int ray_open(struct net_device *dev);
-static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void ray_update_multi_list(struct net_device *dev, int all);
static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
@@ -915,16 +916,19 @@
}
/*===========================================================================*/
-static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
short length = skb->len;
- if (!(pcmcia_dev_present(link))) {
+ if (!pcmcia_dev_present(link)) {
DEBUG(2, "ray_dev_start_xmit - device not present\n");
- return NETDEV_TX_LOCKED;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
}
+
DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
if (local->authentication_state == NEED_TO_AUTH) {
DEBUG(0, "ray_cs Sending authentication request.\n");
@@ -937,7 +941,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
switch (ray_hw_xmit(skb->data, length, dev, DATA_TYPE)) {
@@ -951,9 +955,9 @@
default:
dev->trans_start = jiffies;
dev_kfree_skb(skb);
- return 0;
}
- return 0;
+
+ return NETDEV_TX_OK;
} /* ray_dev_start_xmit */
/*===========================================================================*/
@@ -1511,9 +1515,6 @@
struct pcmcia_device *link = local->finder;
struct status __iomem *p = local->sram + STATUS_BASE;
- if (local == (ray_dev_t *) NULL)
- return (iw_stats *) NULL;
-
local->wstats.status = local->card_status;
#ifdef WIRELESS_SPY
if ((local->spy_data.spy_number > 0)
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 3bec3db..54175b6 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -100,7 +100,6 @@
#define OID_GEN_RCV_ERROR cpu_to_le32(0x00020104)
#define OID_GEN_RCV_NO_BUFFER cpu_to_le32(0x00020105)
-#define OID_802_3_PERMANENT_ADDRESS cpu_to_le32(0x01010101)
#define OID_802_3_CURRENT_ADDRESS cpu_to_le32(0x01010102)
#define OID_802_3_MULTICAST_LIST cpu_to_le32(0x01010103)
#define OID_802_3_MAXIMUM_LIST_SIZE cpu_to_le32(0x01010104)
@@ -139,9 +138,15 @@
/* Assume that Broadcom 4320 (only chipset at time of writing known to be
* based on wireless rndis) has default txpower of 13dBm.
* This value is from Linksys WUSB54GSC User Guide, Appendix F: Specifications.
- * 13dBm == 19.9mW
+ * 100% : 20 mW ~ 13dBm
+ * 75% : 15 mW ~ 12dBm
+ * 50% : 10 mW ~ 10dBm
+ * 25% : 5 mW ~ 7dBm
*/
-#define BCM4320_DEFAULT_TXPOWER 20
+#define BCM4320_DEFAULT_TXPOWER_DBM_100 13
+#define BCM4320_DEFAULT_TXPOWER_DBM_75 12
+#define BCM4320_DEFAULT_TXPOWER_DBM_50 10
+#define BCM4320_DEFAULT_TXPOWER_DBM_25 7
/* codes for "status" field of completion messages */
@@ -196,6 +201,24 @@
NDIS_80211_PRIV_8021X_WEP
};
+enum ndis_80211_status_type {
+ NDIS_80211_STATUSTYPE_AUTHENTICATION,
+ NDIS_80211_STATUSTYPE_MEDIASTREAMMODE,
+ NDIS_80211_STATUSTYPE_PMKID_CANDIDATELIST,
+ NDIS_80211_STATUSTYPE_RADIOSTATE,
+};
+
+enum ndis_80211_media_stream_mode {
+ NDIS_80211_MEDIA_STREAM_OFF,
+ NDIS_80211_MEDIA_STREAM_ON
+};
+
+enum ndis_80211_radio_status {
+ NDIS_80211_RADIO_STATUS_ON,
+ NDIS_80211_RADIO_STATUS_HARDWARE_OFF,
+ NDIS_80211_RADIO_STATUS_SOFTWARE_OFF,
+};
+
enum ndis_80211_addkey_bits {
NDIS_80211_ADDKEY_8021X_AUTH = cpu_to_le32(1 << 28),
NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ = cpu_to_le32(1 << 29),
@@ -208,6 +231,35 @@
NDIS_80211_ADDWEP_TRANSMIT_KEY = cpu_to_le32(1 << 31)
};
+struct ndis_80211_auth_request {
+ __le32 length;
+ u8 bssid[6];
+ u8 padding[2];
+ __le32 flags;
+} __attribute__((packed));
+
+struct ndis_80211_pmkid_candidate {
+ u8 bssid[6];
+ u8 padding[2];
+ __le32 flags;
+} __attribute__((packed));
+
+struct ndis_80211_pmkid_cand_list {
+ __le32 version;
+ __le32 num_candidates;
+ struct ndis_80211_pmkid_candidate candidate_list[0];
+} __attribute__((packed));
+
+struct ndis_80211_status_indication {
+ __le32 status_type;
+ union {
+ __le32 media_stream_mode;
+ __le32 radio_status;
+ struct ndis_80211_auth_request auth_request[0];
+ struct ndis_80211_pmkid_cand_list cand_list;
+ } u;
+} __attribute__((packed));
+
struct ndis_80211_ssid {
__le32 length;
u8 essid[NDIS_802_11_LENGTH_SSID];
@@ -275,6 +327,7 @@
__le32 size;
__le32 index;
u8 bssid[6];
+ u8 padding[2];
} __attribute__((packed));
struct ndis_config_param {
@@ -305,13 +358,6 @@
__le32 offset_resp_ies;
} __attribute__((packed));
-/* these have to match what is in wpa_supplicant */
-enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
-enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
- CIPHER_WEP104 };
-enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
- KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE };
-
/*
* private data
*/
@@ -326,6 +372,15 @@
#define WORK_LINK_DOWN (1<<1)
#define WORK_SET_MULTICAST_LIST (1<<2)
+#define RNDIS_WLAN_ALG_NONE 0
+#define RNDIS_WLAN_ALG_WEP (1<<0)
+#define RNDIS_WLAN_ALG_TKIP (1<<1)
+#define RNDIS_WLAN_ALG_CCMP (1<<2)
+
+#define RNDIS_WLAN_KEY_MGMT_NONE 0
+#define RNDIS_WLAN_KEY_MGMT_802_1X (1<<0)
+#define RNDIS_WLAN_KEY_MGMT_PSK (1<<1)
+
#define COMMAND_BUFFER_SIZE (CONTROL_BUFFER_SIZE + sizeof(struct rndis_set))
static const struct ieee80211_channel rndis_channels[] = {
@@ -360,6 +415,22 @@
{ .bitrate = 540 }
};
+static const u32 rndis_cipher_suites[] = {
+ WLAN_CIPHER_SUITE_WEP40,
+ WLAN_CIPHER_SUITE_WEP104,
+ WLAN_CIPHER_SUITE_TKIP,
+ WLAN_CIPHER_SUITE_CCMP,
+};
+
+struct rndis_wlan_encr_key {
+ int len;
+ u32 cipher;
+ u8 material[32];
+ u8 bssid[ETH_ALEN];
+ bool pairwise;
+ bool tx_key;
+};
+
/* RNDIS device private data */
struct rndis_wlan_private {
struct usbnet *usbdev;
@@ -369,19 +440,17 @@
struct cfg80211_scan_request *scan_request;
struct workqueue_struct *workqueue;
- struct delayed_work stats_work;
+ struct delayed_work dev_poller_work;
struct delayed_work scan_work;
struct work_struct work;
struct mutex command_lock;
- spinlock_t stats_lock;
unsigned long work_pending;
+ int last_qual;
struct ieee80211_supported_band band;
struct ieee80211_channel channels[ARRAY_SIZE(rndis_channels)];
struct ieee80211_rate rates[ARRAY_SIZE(rndis_rates)];
-
- struct iw_statistics iwstats;
- struct iw_statistics privstats;
+ u32 cipher_suites[ARRAY_SIZE(rndis_cipher_suites)];
int caps;
int multicast_size;
@@ -397,18 +466,19 @@
u32 param_workaround_interval;
/* hardware state */
- int radio_on;
+ bool radio_on;
int infra_mode;
+ bool connected;
+ u8 bssid[ETH_ALEN];
struct ndis_80211_ssid essid;
+ __le32 current_command_oid;
/* encryption stuff */
int encr_tx_key_index;
- char encr_keys[4][32];
- int encr_key_len[4];
- char encr_key_wpa[4];
+ struct rndis_wlan_encr_key encr_keys[4];
+ enum nl80211_auth_type wpa_auth_type;
int wpa_version;
int wpa_keymgmt;
- int wpa_authalg;
int wpa_ie_len;
u8 *wpa_ie;
int wpa_cipher_pair;
@@ -420,39 +490,186 @@
/*
* cfg80211 ops
*/
-static int rndis_change_virtual_intf(struct wiphy *wiphy, int ifindex,
+static int rndis_change_virtual_intf(struct wiphy *wiphy,
+ struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params);
static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_scan_request *request);
+static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed);
+
+static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
+ int dbm);
+static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm);
+
+static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_connect_params *sme);
+
+static int rndis_disconnect(struct wiphy *wiphy, struct net_device *dev,
+ u16 reason_code);
+
+static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params);
+
+static int rndis_leave_ibss(struct wiphy *wiphy, struct net_device *dev);
+
+static int rndis_set_channel(struct wiphy *wiphy,
+ struct ieee80211_channel *chan, enum nl80211_channel_type channel_type);
+
+static int rndis_add_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, const u8 *mac_addr,
+ struct key_params *params);
+
+static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, const u8 *mac_addr);
+
+static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index);
+
+static int rndis_get_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac, struct station_info *sinfo);
+
+static int rndis_dump_station(struct wiphy *wiphy, struct net_device *dev,
+ int idx, u8 *mac, struct station_info *sinfo);
+
static struct cfg80211_ops rndis_config_ops = {
.change_virtual_intf = rndis_change_virtual_intf,
.scan = rndis_scan,
+ .set_wiphy_params = rndis_set_wiphy_params,
+ .set_tx_power = rndis_set_tx_power,
+ .get_tx_power = rndis_get_tx_power,
+ .connect = rndis_connect,
+ .disconnect = rndis_disconnect,
+ .join_ibss = rndis_join_ibss,
+ .leave_ibss = rndis_leave_ibss,
+ .set_channel = rndis_set_channel,
+ .add_key = rndis_add_key,
+ .del_key = rndis_del_key,
+ .set_default_key = rndis_set_default_key,
+ .get_station = rndis_get_station,
+ .dump_station = rndis_dump_station,
};
static void *rndis_wiphy_privid = &rndis_wiphy_privid;
-static const int bcm4320_power_output[4] = { 25, 50, 75, 100 };
-
-static const unsigned char zero_bssid[ETH_ALEN] = {0,};
-static const unsigned char ffff_bssid[ETH_ALEN] = { 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff };
-
static struct rndis_wlan_private *get_rndis_wlan_priv(struct usbnet *dev)
{
return (struct rndis_wlan_private *)dev->driver_priv;
}
-
-static u32 get_bcm4320_power(struct rndis_wlan_private *priv)
+static u32 get_bcm4320_power_dbm(struct rndis_wlan_private *priv)
{
- return BCM4320_DEFAULT_TXPOWER *
- bcm4320_power_output[priv->param_power_output] / 100;
+ switch (priv->param_power_output) {
+ default:
+ case 3:
+ return BCM4320_DEFAULT_TXPOWER_DBM_100;
+ case 2:
+ return BCM4320_DEFAULT_TXPOWER_DBM_75;
+ case 1:
+ return BCM4320_DEFAULT_TXPOWER_DBM_50;
+ case 0:
+ return BCM4320_DEFAULT_TXPOWER_DBM_25;
+ }
}
+static bool is_wpa_key(struct rndis_wlan_private *priv, int idx)
+{
+ int cipher = priv->encr_keys[idx].cipher;
+
+ return (cipher == WLAN_CIPHER_SUITE_CCMP ||
+ cipher == WLAN_CIPHER_SUITE_TKIP);
+}
+
+static int rndis_cipher_to_alg(u32 cipher)
+{
+ switch (cipher) {
+ default:
+ return RNDIS_WLAN_ALG_NONE;
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ return RNDIS_WLAN_ALG_WEP;
+ case WLAN_CIPHER_SUITE_TKIP:
+ return RNDIS_WLAN_ALG_TKIP;
+ case WLAN_CIPHER_SUITE_CCMP:
+ return RNDIS_WLAN_ALG_CCMP;
+ }
+}
+
+static int rndis_akm_suite_to_key_mgmt(u32 akm_suite)
+{
+ switch (akm_suite) {
+ default:
+ return RNDIS_WLAN_KEY_MGMT_NONE;
+ case WLAN_AKM_SUITE_8021X:
+ return RNDIS_WLAN_KEY_MGMT_802_1X;
+ case WLAN_AKM_SUITE_PSK:
+ return RNDIS_WLAN_KEY_MGMT_PSK;
+ }
+}
+
+#ifdef DEBUG
+static const char *oid_to_string(__le32 oid)
+{
+ switch (oid) {
+#define OID_STR(oid) case oid: return(#oid)
+ /* from rndis_host.h */
+ OID_STR(OID_802_3_PERMANENT_ADDRESS);
+ OID_STR(OID_GEN_MAXIMUM_FRAME_SIZE);
+ OID_STR(OID_GEN_CURRENT_PACKET_FILTER);
+ OID_STR(OID_GEN_PHYSICAL_MEDIUM);
+
+ /* from rndis_wlan.c */
+ OID_STR(OID_GEN_LINK_SPEED);
+ OID_STR(OID_GEN_RNDIS_CONFIG_PARAMETER);
+
+ OID_STR(OID_GEN_XMIT_OK);
+ OID_STR(OID_GEN_RCV_OK);
+ OID_STR(OID_GEN_XMIT_ERROR);
+ OID_STR(OID_GEN_RCV_ERROR);
+ OID_STR(OID_GEN_RCV_NO_BUFFER);
+
+ OID_STR(OID_802_3_CURRENT_ADDRESS);
+ OID_STR(OID_802_3_MULTICAST_LIST);
+ OID_STR(OID_802_3_MAXIMUM_LIST_SIZE);
+
+ OID_STR(OID_802_11_BSSID);
+ OID_STR(OID_802_11_SSID);
+ OID_STR(OID_802_11_INFRASTRUCTURE_MODE);
+ OID_STR(OID_802_11_ADD_WEP);
+ OID_STR(OID_802_11_REMOVE_WEP);
+ OID_STR(OID_802_11_DISASSOCIATE);
+ OID_STR(OID_802_11_AUTHENTICATION_MODE);
+ OID_STR(OID_802_11_PRIVACY_FILTER);
+ OID_STR(OID_802_11_BSSID_LIST_SCAN);
+ OID_STR(OID_802_11_ENCRYPTION_STATUS);
+ OID_STR(OID_802_11_ADD_KEY);
+ OID_STR(OID_802_11_REMOVE_KEY);
+ OID_STR(OID_802_11_ASSOCIATION_INFORMATION);
+ OID_STR(OID_802_11_PMKID);
+ OID_STR(OID_802_11_NETWORK_TYPES_SUPPORTED);
+ OID_STR(OID_802_11_NETWORK_TYPE_IN_USE);
+ OID_STR(OID_802_11_TX_POWER_LEVEL);
+ OID_STR(OID_802_11_RSSI);
+ OID_STR(OID_802_11_RSSI_TRIGGER);
+ OID_STR(OID_802_11_FRAGMENTATION_THRESHOLD);
+ OID_STR(OID_802_11_RTS_THRESHOLD);
+ OID_STR(OID_802_11_SUPPORTED_RATES);
+ OID_STR(OID_802_11_CONFIGURATION);
+ OID_STR(OID_802_11_BSSID_LIST);
+#undef OID_STR
+ }
+
+ return "?";
+}
+#else
+static const char *oid_to_string(__le32 oid)
+{
+ return "?";
+}
+#endif
/* translate error code */
static int rndis_error_status(__le32 rndis_status)
@@ -477,7 +694,6 @@
return ret;
}
-
static int rndis_query_oid(struct usbnet *dev, __le32 oid, void *data, int *len)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
@@ -508,12 +724,25 @@
u.get->msg_len = cpu_to_le32(sizeof *u.get);
u.get->oid = oid;
+ priv->current_command_oid = oid;
ret = rndis_command(dev, u.header, buflen);
+ priv->current_command_oid = 0;
+ if (ret < 0)
+ devdbg(dev, "rndis_query_oid(%s): rndis_command() failed, %d "
+ "(%08x)", oid_to_string(oid), ret,
+ le32_to_cpu(u.get_c->status));
+
if (ret == 0) {
ret = le32_to_cpu(u.get_c->len);
- *len = (*len > ret) ? ret : *len;
+ if (ret > *len)
+ *len = ret;
memcpy(data, u.buf + le32_to_cpu(u.get_c->offset) + 8, *len);
ret = rndis_error_status(u.get_c->status);
+
+ if (ret < 0)
+ devdbg(dev, "rndis_query_oid(%s): device returned "
+ "error, 0x%08x (%d)", oid_to_string(oid),
+ le32_to_cpu(u.get_c->status), ret);
}
mutex_unlock(&priv->command_lock);
@@ -523,7 +752,6 @@
return ret;
}
-
static int rndis_set_oid(struct usbnet *dev, __le32 oid, void *data, int len)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
@@ -558,10 +786,23 @@
u.set->handle = cpu_to_le32(0);
memcpy(u.buf + sizeof(*u.set), data, len);
+ priv->current_command_oid = oid;
ret = rndis_command(dev, u.header, buflen);
- if (ret == 0)
+ priv->current_command_oid = 0;
+ if (ret < 0)
+ devdbg(dev, "rndis_set_oid(%s): rndis_command() failed, %d "
+ "(%08x)", oid_to_string(oid), ret,
+ le32_to_cpu(u.set_c->status));
+
+ if (ret == 0) {
ret = rndis_error_status(u.set_c->status);
+ if (ret < 0)
+ devdbg(dev, "rndis_set_oid(%s): device returned error, "
+ "0x%08x (%d)", oid_to_string(oid),
+ le32_to_cpu(u.set_c->status), ret);
+ }
+
mutex_unlock(&priv->command_lock);
if (u.buf != priv->command_buffer)
@@ -569,6 +810,27 @@
return ret;
}
+static int rndis_reset(struct usbnet *usbdev)
+{
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ struct rndis_reset *reset;
+ int ret;
+
+ mutex_lock(&priv->command_lock);
+
+ reset = (void *)priv->command_buffer;
+ memset(reset, 0, sizeof(*reset));
+ reset->msg_type = RNDIS_MSG_RESET;
+ reset->msg_len = cpu_to_le32(sizeof(*reset));
+ priv->current_command_oid = 0;
+ ret = rndis_command(usbdev, (void *)reset, CONTROL_BUFFER_SIZE);
+
+ mutex_unlock(&priv->command_lock);
+
+ if (ret < 0)
+ return ret;
+ return 0;
+}
/*
* Specs say that we can only set config parameters only soon after device
@@ -656,16 +918,9 @@
static int rndis_set_config_parameter_str(struct usbnet *dev,
char *param, char *value)
{
- return(rndis_set_config_parameter(dev, param, 2, value));
+ return rndis_set_config_parameter(dev, param, 2, value);
}
-/*static int rndis_set_config_parameter_u32(struct usbnet *dev,
- char *param, u32 value)
-{
- return(rndis_set_config_parameter(dev, param, 0, &value));
-}*/
-
-
/*
* data conversion functions
*/
@@ -675,75 +930,12 @@
return qual >= 0 ? (qual <= 100 ? qual : 100) : 0;
}
-
-static void dsconfig_to_freq(unsigned int dsconfig, struct iw_freq *freq)
-{
- freq->e = 0;
- freq->i = 0;
- freq->flags = 0;
-
- /* see comment in wireless.h above the "struct iw_freq"
- * definition for an explanation of this if
- * NOTE: 1000000 is due to the kHz
- */
- if (dsconfig > 1000000) {
- freq->m = dsconfig / 10;
- freq->e = 1;
- } else
- freq->m = dsconfig;
-
- /* convert from kHz to Hz */
- freq->e += 3;
-}
-
-
-static int freq_to_dsconfig(struct iw_freq *freq, unsigned int *dsconfig)
-{
- if (freq->m < 1000 && freq->e == 0) {
- if (freq->m >= 1 && freq->m <= 14)
- *dsconfig = ieee80211_dsss_chan_to_freq(freq->m) * 1000;
- else
- return -1;
- } else {
- int i;
- *dsconfig = freq->m;
- for (i = freq->e; i > 0; i--)
- *dsconfig *= 10;
- *dsconfig /= 1000;
- }
-
- return 0;
-}
-
-
/*
* common functions
*/
-static int
-add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index);
-
-static int get_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
-{
- int ret, len;
-
- len = sizeof(*ssid);
- ret = rndis_query_oid(usbdev, OID_802_11_SSID, ssid, &len);
-
- if (ret != 0)
- ssid->length = 0;
-
-#ifdef DEBUG
- {
- unsigned char tmp[NDIS_802_11_LENGTH_SSID + 1];
-
- memcpy(tmp, ssid->essid, le32_to_cpu(ssid->length));
- tmp[le32_to_cpu(ssid->length)] = 0;
- devdbg(usbdev, "get_essid: '%s', ret: %d", tmp, ret);
- }
-#endif
- return ret;
-}
-
+static int set_infra_mode(struct usbnet *usbdev, int mode);
+static void restore_keys(struct usbnet *usbdev);
+static int rndis_check_bssid_list(struct usbnet *usbdev);
static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
{
@@ -751,15 +943,38 @@
int ret;
ret = rndis_set_oid(usbdev, OID_802_11_SSID, ssid, sizeof(*ssid));
+ if (ret < 0) {
+ devwarn(usbdev, "setting SSID failed (%08X)", ret);
+ return ret;
+ }
if (ret == 0) {
memcpy(&priv->essid, ssid, sizeof(priv->essid));
- priv->radio_on = 1;
- devdbg(usbdev, "set_essid: radio_on = 1");
+ priv->radio_on = true;
+ devdbg(usbdev, "set_essid: radio_on = true");
}
return ret;
}
+static int set_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN])
+{
+ int ret;
+
+ ret = rndis_set_oid(usbdev, OID_802_11_BSSID, bssid, ETH_ALEN);
+ if (ret < 0) {
+ devwarn(usbdev, "setting BSSID[%pM] failed (%08X)", bssid, ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int clear_bssid(struct usbnet *usbdev)
+{
+ u8 broadcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+ return set_bssid(usbdev, broadcast_mac);
+}
static int get_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN])
{
@@ -781,18 +996,21 @@
info, &len);
}
-static int is_associated(struct usbnet *usbdev)
+static bool is_associated(struct usbnet *usbdev)
{
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
u8 bssid[ETH_ALEN];
int ret;
+ if (!priv->radio_on)
+ return false;
+
ret = get_bssid(usbdev, bssid);
- return(ret == 0 && memcmp(bssid, zero_bssid, ETH_ALEN) != 0);
+ return (ret == 0 && !is_zero_ether_addr(bssid));
}
-
-static int disassociate(struct usbnet *usbdev, int reset_ssid)
+static int disassociate(struct usbnet *usbdev, bool reset_ssid)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
struct ndis_80211_ssid ssid;
@@ -801,8 +1019,8 @@
if (priv->radio_on) {
ret = rndis_set_oid(usbdev, OID_802_11_DISASSOCIATE, NULL, 0);
if (ret == 0) {
- priv->radio_on = 0;
- devdbg(usbdev, "disassociate: radio_on = 0");
+ priv->radio_on = false;
+ devdbg(usbdev, "disassociate: radio_on = false");
if (reset_ssid)
msleep(100);
@@ -812,6 +1030,11 @@
/* disassociate causes radio to be turned off; if reset_ssid
* is given, set random ssid to enable radio */
if (reset_ssid) {
+ /* Set device to infrastructure mode so we don't get ad-hoc
+ * 'media connect' indications with the random ssid.
+ */
+ set_infra_mode(usbdev, NDIS_80211_INFRA_INFRA);
+
ssid.length = cpu_to_le32(sizeof(ssid.essid));
get_random_bytes(&ssid.essid[2], sizeof(ssid.essid)-2);
ssid.essid[0] = 0x1;
@@ -823,35 +1046,34 @@
return ret;
}
-
-static int set_auth_mode(struct usbnet *usbdev, int wpa_version, int authalg)
+static int set_auth_mode(struct usbnet *usbdev, u32 wpa_version,
+ enum nl80211_auth_type auth_type, int keymgmt)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
__le32 tmp;
int auth_mode, ret;
devdbg(usbdev, "set_auth_mode: wpa_version=0x%x authalg=0x%x "
- "keymgmt=0x%x", wpa_version, authalg, priv->wpa_keymgmt);
+ "keymgmt=0x%x", wpa_version, auth_type, keymgmt);
- if (wpa_version & IW_AUTH_WPA_VERSION_WPA2) {
- if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_802_1X)
+ if (wpa_version & NL80211_WPA_VERSION_2) {
+ if (keymgmt & RNDIS_WLAN_KEY_MGMT_802_1X)
auth_mode = NDIS_80211_AUTH_WPA2;
else
auth_mode = NDIS_80211_AUTH_WPA2_PSK;
- } else if (wpa_version & IW_AUTH_WPA_VERSION_WPA) {
- if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_802_1X)
+ } else if (wpa_version & NL80211_WPA_VERSION_1) {
+ if (keymgmt & RNDIS_WLAN_KEY_MGMT_802_1X)
auth_mode = NDIS_80211_AUTH_WPA;
- else if (priv->wpa_keymgmt & IW_AUTH_KEY_MGMT_PSK)
+ else if (keymgmt & RNDIS_WLAN_KEY_MGMT_PSK)
auth_mode = NDIS_80211_AUTH_WPA_PSK;
else
auth_mode = NDIS_80211_AUTH_WPA_NONE;
- } else if (authalg & IW_AUTH_ALG_SHARED_KEY) {
- if (authalg & IW_AUTH_ALG_OPEN_SYSTEM)
- auth_mode = NDIS_80211_AUTH_AUTO_SWITCH;
- else
- auth_mode = NDIS_80211_AUTH_SHARED;
- } else
+ } else if (auth_type == NL80211_AUTHTYPE_SHARED_KEY)
+ auth_mode = NDIS_80211_AUTH_SHARED;
+ else if (auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM)
auth_mode = NDIS_80211_AUTH_OPEN;
+ else
+ return -ENOTSUPP;
tmp = cpu_to_le32(auth_mode);
ret = rndis_set_oid(usbdev, OID_802_11_AUTHENTICATION_MODE, &tmp,
@@ -862,11 +1084,12 @@
}
priv->wpa_version = wpa_version;
- priv->wpa_authalg = authalg;
+ priv->wpa_auth_type = auth_type;
+ priv->wpa_keymgmt = keymgmt;
+
return 0;
}
-
static int set_priv_filter(struct usbnet *usbdev)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
@@ -874,8 +1097,8 @@
devdbg(usbdev, "set_priv_filter: wpa_version=0x%x", priv->wpa_version);
- if (priv->wpa_version & IW_AUTH_WPA_VERSION_WPA2 ||
- priv->wpa_version & IW_AUTH_WPA_VERSION_WPA)
+ if (priv->wpa_version & NL80211_WPA_VERSION_2 ||
+ priv->wpa_version & NL80211_WPA_VERSION_1)
tmp = cpu_to_le32(NDIS_80211_PRIV_8021X_WEP);
else
tmp = cpu_to_le32(NDIS_80211_PRIV_ACCEPT_ALL);
@@ -884,7 +1107,6 @@
sizeof(tmp));
}
-
static int set_encr_mode(struct usbnet *usbdev, int pairwise, int groupwise)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
@@ -892,19 +1114,17 @@
int encr_mode, ret;
devdbg(usbdev, "set_encr_mode: cipher_pair=0x%x cipher_group=0x%x",
- pairwise,
- groupwise);
+ pairwise, groupwise);
- if (pairwise & IW_AUTH_CIPHER_CCMP)
+ if (pairwise & RNDIS_WLAN_ALG_CCMP)
encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
- else if (pairwise & IW_AUTH_CIPHER_TKIP)
+ else if (pairwise & RNDIS_WLAN_ALG_TKIP)
encr_mode = NDIS_80211_ENCR_TKIP_ENABLED;
- else if (pairwise &
- (IW_AUTH_CIPHER_WEP40 | IW_AUTH_CIPHER_WEP104))
+ else if (pairwise & RNDIS_WLAN_ALG_WEP)
encr_mode = NDIS_80211_ENCR_WEP_ENABLED;
- else if (groupwise & IW_AUTH_CIPHER_CCMP)
+ else if (groupwise & RNDIS_WLAN_ALG_CCMP)
encr_mode = NDIS_80211_ENCR_CCMP_ENABLED;
- else if (groupwise & IW_AUTH_CIPHER_TKIP)
+ else if (groupwise & RNDIS_WLAN_ALG_TKIP)
encr_mode = NDIS_80211_ENCR_TKIP_ENABLED;
else
encr_mode = NDIS_80211_ENCR_DISABLED;
@@ -922,24 +1142,11 @@
return 0;
}
-
-static int set_assoc_params(struct usbnet *usbdev)
-{
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
-
- set_auth_mode(usbdev, priv->wpa_version, priv->wpa_authalg);
- set_priv_filter(usbdev);
- set_encr_mode(usbdev, priv->wpa_cipher_pair, priv->wpa_cipher_group);
-
- return 0;
-}
-
-
static int set_infra_mode(struct usbnet *usbdev, int mode)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
__le32 tmp;
- int ret, i;
+ int ret;
devdbg(usbdev, "set_infra_mode: infra_mode=0x%x", priv->infra_mode);
@@ -954,55 +1161,107 @@
/* NDIS drivers clear keys when infrastructure mode is
* changed. But Linux tools assume otherwise. So set the
* keys */
- if (priv->wpa_keymgmt == 0 ||
- priv->wpa_keymgmt == IW_AUTH_KEY_MGMT_802_1X) {
- for (i = 0; i < 4; i++) {
- if (priv->encr_key_len[i] > 0 && !priv->encr_key_wpa[i])
- add_wep_key(usbdev, priv->encr_keys[i],
- priv->encr_key_len[i], i);
- }
- }
+ restore_keys(usbdev);
priv->infra_mode = mode;
return 0;
}
+static int set_rts_threshold(struct usbnet *usbdev, u32 rts_threshold)
+{
+ __le32 tmp;
+
+ devdbg(usbdev, "set_rts_threshold %i", rts_threshold);
+
+ if (rts_threshold < 0 || rts_threshold > 2347)
+ rts_threshold = 2347;
+
+ tmp = cpu_to_le32(rts_threshold);
+ return rndis_set_oid(usbdev, OID_802_11_RTS_THRESHOLD, &tmp,
+ sizeof(tmp));
+}
+
+static int set_frag_threshold(struct usbnet *usbdev, u32 frag_threshold)
+{
+ __le32 tmp;
+
+ devdbg(usbdev, "set_frag_threshold %i", frag_threshold);
+
+ if (frag_threshold < 256 || frag_threshold > 2346)
+ frag_threshold = 2346;
+
+ tmp = cpu_to_le32(frag_threshold);
+ return rndis_set_oid(usbdev, OID_802_11_FRAGMENTATION_THRESHOLD, &tmp,
+ sizeof(tmp));
+}
static void set_default_iw_params(struct usbnet *usbdev)
{
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
-
- priv->wpa_keymgmt = 0;
- priv->wpa_version = 0;
-
set_infra_mode(usbdev, NDIS_80211_INFRA_INFRA);
- set_auth_mode(usbdev, IW_AUTH_WPA_VERSION_DISABLED,
- IW_AUTH_ALG_OPEN_SYSTEM);
+ set_auth_mode(usbdev, 0, NL80211_AUTHTYPE_OPEN_SYSTEM,
+ RNDIS_WLAN_KEY_MGMT_NONE);
set_priv_filter(usbdev);
- set_encr_mode(usbdev, IW_AUTH_CIPHER_NONE, IW_AUTH_CIPHER_NONE);
+ set_encr_mode(usbdev, RNDIS_WLAN_ALG_NONE, RNDIS_WLAN_ALG_NONE);
}
-
static int deauthenticate(struct usbnet *usbdev)
{
int ret;
- ret = disassociate(usbdev, 1);
+ ret = disassociate(usbdev, true);
set_default_iw_params(usbdev);
return ret;
}
+static int set_channel(struct usbnet *usbdev, int channel)
+{
+ struct ndis_80211_conf config;
+ unsigned int dsconfig;
+ int len, ret;
+
+ devdbg(usbdev, "set_channel(%d)", channel);
+
+ /* this OID is valid only when not associated */
+ if (is_associated(usbdev))
+ return 0;
+
+ dsconfig = ieee80211_dsss_chan_to_freq(channel) * 1000;
+
+ len = sizeof(config);
+ ret = rndis_query_oid(usbdev, OID_802_11_CONFIGURATION, &config, &len);
+ if (ret < 0) {
+ devdbg(usbdev, "set_channel: querying configuration failed");
+ return ret;
+ }
+
+ config.ds_config = cpu_to_le32(dsconfig);
+ ret = rndis_set_oid(usbdev, OID_802_11_CONFIGURATION, &config,
+ sizeof(config));
+
+ devdbg(usbdev, "set_channel: %d -> %d", channel, ret);
+
+ return ret;
+}
/* index must be 0 - N, as per NDIS */
-static int add_wep_key(struct usbnet *usbdev, char *key, int key_len, int index)
+static int add_wep_key(struct usbnet *usbdev, const u8 *key, int key_len,
+ int index)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
struct ndis_80211_wep_key ndis_key;
+ u32 cipher;
int ret;
- if (key_len <= 0 || key_len > 32 || index < 0 || index >= 4)
+ devdbg(usbdev, "add_wep_key(idx: %d, len: %d)", index, key_len);
+
+ if ((key_len != 5 && key_len != 13) || index < 0 || index > 3)
return -EINVAL;
+ if (key_len == 5)
+ cipher = WLAN_CIPHER_SUITE_WEP40;
+ else
+ cipher = WLAN_CIPHER_SUITE_WEP104;
+
memset(&ndis_key, 0, sizeof(ndis_key));
ndis_key.size = cpu_to_le32(sizeof(ndis_key));
@@ -1012,8 +1271,8 @@
if (index == priv->encr_tx_key_index) {
ndis_key.index |= NDIS_80211_ADDWEP_TRANSMIT_KEY;
- ret = set_encr_mode(usbdev, IW_AUTH_CIPHER_WEP104,
- IW_AUTH_CIPHER_NONE);
+ ret = set_encr_mode(usbdev, RNDIS_WLAN_ALG_WEP,
+ RNDIS_WLAN_ALG_NONE);
if (ret)
devwarn(usbdev, "encryption couldn't be enabled (%08X)",
ret);
@@ -1027,30 +1286,51 @@
return ret;
}
- priv->encr_key_len[index] = key_len;
- priv->encr_key_wpa[index] = 0;
- memcpy(&priv->encr_keys[index], key, key_len);
+ priv->encr_keys[index].len = key_len;
+ priv->encr_keys[index].cipher = cipher;
+ memcpy(&priv->encr_keys[index].material, key, key_len);
+ memset(&priv->encr_keys[index].bssid, 0xff, ETH_ALEN);
return 0;
}
-
static int add_wpa_key(struct usbnet *usbdev, const u8 *key, int key_len,
- int index, const struct sockaddr *addr,
- const u8 *rx_seq, int alg, int flags)
+ int index, const u8 *addr, const u8 *rx_seq,
+ int seq_len, u32 cipher, __le32 flags)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
struct ndis_80211_key ndis_key;
+ bool is_addr_ok;
int ret;
- if (index < 0 || index >= 4)
+ if (index < 0 || index >= 4) {
+ devdbg(usbdev, "add_wpa_key: index out of range (%i)", index);
return -EINVAL;
- if (key_len > sizeof(ndis_key.material) || key_len < 0)
+ }
+ if (key_len > sizeof(ndis_key.material) || key_len < 0) {
+ devdbg(usbdev, "add_wpa_key: key length out of range (%i)",
+ key_len);
return -EINVAL;
- if ((flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ) && !rx_seq)
+ }
+ if (flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ) {
+ if (!rx_seq || seq_len <= 0) {
+ devdbg(usbdev, "add_wpa_key: recv seq flag without"
+ "buffer");
+ return -EINVAL;
+ }
+ if (rx_seq && seq_len > sizeof(ndis_key.rsc)) {
+ devdbg(usbdev, "add_wpa_key: too big recv seq buffer");
+ return -EINVAL;
+ }
+ }
+
+ is_addr_ok = addr && !is_zero_ether_addr(addr) &&
+ !is_broadcast_ether_addr(addr);
+ if ((flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) && !is_addr_ok) {
+ devdbg(usbdev, "add_wpa_key: pairwise but bssid invalid (%pM)",
+ addr);
return -EINVAL;
- if ((flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) && !addr)
- return -EINVAL;
+ }
devdbg(usbdev, "add_wpa_key(%i): flags:%i%i%i", index,
!!(flags & NDIS_80211_ADDKEY_TRANSMIT_KEY),
@@ -1064,7 +1344,7 @@
ndis_key.length = cpu_to_le32(key_len);
ndis_key.index = cpu_to_le32(index) | flags;
- if (alg == IW_ENCODE_ALG_TKIP && key_len == 32) {
+ if (cipher == WLAN_CIPHER_SUITE_TKIP && key_len == 32) {
/* wpa_supplicant gives us the Michael MIC RX/TX keys in
* different order than NDIS spec, so swap the order here. */
memcpy(ndis_key.material, key, 16);
@@ -1074,11 +1354,11 @@
memcpy(ndis_key.material, key, key_len);
if (flags & NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ)
- memcpy(ndis_key.rsc, rx_seq, 6);
+ memcpy(ndis_key.rsc, rx_seq, seq_len);
if (flags & NDIS_80211_ADDKEY_PAIRWISE_KEY) {
/* pairwise key */
- memcpy(ndis_key.bssid, addr->sa_data, ETH_ALEN);
+ memcpy(ndis_key.bssid, addr, ETH_ALEN);
} else {
/* group key */
if (priv->infra_mode == NDIS_80211_INFRA_ADHOC)
@@ -1093,8 +1373,14 @@
if (ret != 0)
return ret;
- priv->encr_key_len[index] = key_len;
- priv->encr_key_wpa[index] = 1;
+ memset(&priv->encr_keys[index], 0, sizeof(priv->encr_keys[index]));
+ priv->encr_keys[index].len = key_len;
+ priv->encr_keys[index].cipher = cipher;
+ memcpy(&priv->encr_keys[index].material, key, key_len);
+ if (flags & NDIS_80211_ADDKEY_PAIRWISE_KEY)
+ memcpy(&priv->encr_keys[index].bssid, ndis_key.bssid, ETH_ALEN);
+ else
+ memset(&priv->encr_keys[index].bssid, 0xff, ETH_ALEN);
if (flags & NDIS_80211_ADDKEY_TRANSMIT_KEY)
priv->encr_tx_key_index = index;
@@ -1102,31 +1388,62 @@
return 0;
}
+static int restore_key(struct usbnet *usbdev, int key_idx)
+{
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ struct rndis_wlan_encr_key key;
+
+ if (is_wpa_key(priv, key_idx))
+ return 0;
+
+ key = priv->encr_keys[key_idx];
+
+ devdbg(usbdev, "restore_key: %i:%i", key_idx, key.len);
+
+ if (key.len == 0)
+ return 0;
+
+ return add_wep_key(usbdev, key.material, key.len, key_idx);
+}
+
+static void restore_keys(struct usbnet *usbdev)
+{
+ int i;
+
+ for (i = 0; i < 4; i++)
+ restore_key(usbdev, i);
+}
+
+static void clear_key(struct rndis_wlan_private *priv, int idx)
+{
+ memset(&priv->encr_keys[idx], 0, sizeof(priv->encr_keys[idx]));
+}
/* remove_key is for both wep and wpa */
-static int remove_key(struct usbnet *usbdev, int index, u8 bssid[ETH_ALEN])
+static int remove_key(struct usbnet *usbdev, int index, const u8 *bssid)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
struct ndis_80211_remove_key remove_key;
__le32 keyindex;
+ bool is_wpa;
int ret;
- if (priv->encr_key_len[index] == 0)
+ if (priv->encr_keys[index].len == 0)
return 0;
- priv->encr_key_len[index] = 0;
- priv->encr_key_wpa[index] = 0;
- memset(&priv->encr_keys[index], 0, sizeof(priv->encr_keys[index]));
+ is_wpa = is_wpa_key(priv, index);
- if (priv->wpa_cipher_pair == IW_AUTH_CIPHER_TKIP ||
- priv->wpa_cipher_pair == IW_AUTH_CIPHER_CCMP ||
- priv->wpa_cipher_group == IW_AUTH_CIPHER_TKIP ||
- priv->wpa_cipher_group == IW_AUTH_CIPHER_CCMP) {
+ devdbg(usbdev, "remove_key: %i:%s:%i", index, is_wpa ? "wpa" : "wep",
+ priv->encr_keys[index].len);
+
+ clear_key(priv, index);
+
+ if (is_wpa) {
remove_key.size = cpu_to_le32(sizeof(remove_key));
remove_key.index = cpu_to_le32(index);
if (bssid) {
/* pairwise key */
- if (memcmp(bssid, ffff_bssid, ETH_ALEN) != 0)
+ if (!is_broadcast_ether_addr(bssid))
remove_key.index |=
NDIS_80211_ADDKEY_PAIRWISE_KEY;
memcpy(remove_key.bssid, bssid,
@@ -1153,12 +1470,11 @@
/* if it is transmit key, disable encryption */
if (index == priv->encr_tx_key_index)
- set_encr_mode(usbdev, IW_AUTH_CIPHER_NONE, IW_AUTH_CIPHER_NONE);
+ set_encr_mode(usbdev, RNDIS_WLAN_ALG_NONE, RNDIS_WLAN_ALG_NONE);
return 0;
}
-
static void set_multicast_list(struct usbnet *usbdev)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
@@ -1218,24 +1534,18 @@
le32_to_cpu(filter), ret);
}
-
/*
* cfg80211 ops
*/
-static int rndis_change_virtual_intf(struct wiphy *wiphy, int ifindex,
+static int rndis_change_virtual_intf(struct wiphy *wiphy,
+ struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
- struct net_device *dev;
- struct usbnet *usbdev;
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
int mode;
- /* we're under RTNL */
- dev = __dev_get_by_index(&init_net, ifindex);
- if (!dev)
- return -ENODEV;
- usbdev = netdev_priv(dev);
-
switch (type) {
case NL80211_IFTYPE_ADHOC:
mode = NDIS_80211_INFRA_ADHOC;
@@ -1247,11 +1557,67 @@
return -EINVAL;
}
+ priv->wdev.iftype = type;
+
return set_infra_mode(usbdev, mode);
}
+static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+ int err;
-#define SCAN_DELAY_JIFFIES (HZ)
+ if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+ err = set_frag_threshold(usbdev, wiphy->frag_threshold);
+ if (err < 0)
+ return err;
+ }
+
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+ err = set_rts_threshold(usbdev, wiphy->rts_threshold);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
+ int dbm)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ devdbg(usbdev, "rndis_set_tx_power type:0x%x dbm:%i", type, dbm);
+
+ /* Device doesn't support changing txpower after initialization, only
+ * turn off/on radio. Support 'auto' mode and setting same dBm that is
+ * currently used.
+ */
+ if (type == TX_POWER_AUTOMATIC || dbm == get_bcm4320_power_dbm(priv)) {
+ if (!priv->radio_on)
+ disassociate(usbdev, true); /* turn on radio */
+
+ return 0;
+ }
+
+ return -ENOTSUPP;
+}
+
+static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ *dbm = get_bcm4320_power_dbm(priv);
+
+ devdbg(usbdev, "rndis_get_tx_power dbm:%i", *dbm);
+
+ return 0;
+}
+
+#define SCAN_DELAY_JIFFIES (6 * HZ)
static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_scan_request *request)
{
@@ -1262,6 +1628,11 @@
devdbg(usbdev, "cfg80211.scan");
+ /* Get current bssid list from device before new scan, as new scan
+ * clears internal bssid list.
+ */
+ rndis_check_bssid_list(usbdev);
+
if (!request)
return -EINVAL;
@@ -1282,7 +1653,6 @@
return ret;
}
-
static struct cfg80211_bss *rndis_bss_info_update(struct usbnet *usbdev,
struct ndis_80211_bssid_ex *bssid)
{
@@ -1296,6 +1666,9 @@
int ie_len, bssid_len;
u8 *ie;
+ devdbg(usbdev, " found bssid: '%.32s' [%pM]", bssid->ssid.essid,
+ bssid->mac);
+
/* parse bssid structure */
bssid_len = le32_to_cpu(bssid->length);
@@ -1328,17 +1701,18 @@
GFP_KERNEL);
}
-
static int rndis_check_bssid_list(struct usbnet *usbdev)
{
void *buf = NULL;
struct ndis_80211_bssid_list_ex *bssid_list;
struct ndis_80211_bssid_ex *bssid;
int ret = -EINVAL, len, count, bssid_len;
+ bool resized = false;
devdbg(usbdev, "check_bssid_list");
len = CONTROL_BUFFER_SIZE;
+resize_buf:
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
ret = -ENOMEM;
@@ -1349,11 +1723,18 @@
if (ret != 0)
goto out;
+ if (!resized && len > CONTROL_BUFFER_SIZE) {
+ resized = true;
+ kfree(buf);
+ goto resize_buf;
+ }
+
bssid_list = buf;
bssid = bssid_list->bssid;
bssid_len = le32_to_cpu(bssid->length);
count = le32_to_cpu(bssid_list->num_items);
- devdbg(usbdev, "check_bssid_list: %d BSSIDs found", count);
+ devdbg(usbdev, "check_bssid_list: %d BSSIDs found (buflen: %d)", count,
+ len);
while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
rndis_bss_info_update(usbdev, bssid);
@@ -1368,7 +1749,6 @@
return ret;
}
-
static void rndis_get_scan_results(struct work_struct *work)
{
struct rndis_wlan_private *priv =
@@ -1378,6 +1758,9 @@
devdbg(usbdev, "get_scan_results");
+ if (!priv->scan_request)
+ return;
+
ret = rndis_check_bssid_list(usbdev);
cfg80211_scan_done(priv->scan_request, ret < 0);
@@ -1385,735 +1768,474 @@
priv->scan_request = NULL;
}
-
-/*
- * wireless extension handlers
- */
-
-static int rndis_iw_commit(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_connect_params *sme)
{
- /* dummy op */
- return 0;
-}
-
-
-static int rndis_iw_set_essid(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *essid)
-{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+ struct ieee80211_channel *channel = sme->channel;
struct ndis_80211_ssid ssid;
- int length = wrqu->essid.length;
- struct usbnet *usbdev = netdev_priv(dev);
+ int pairwise = RNDIS_WLAN_ALG_NONE;
+ int groupwise = RNDIS_WLAN_ALG_NONE;
+ int keymgmt = RNDIS_WLAN_KEY_MGMT_NONE;
+ int length, i, ret, chan = -1;
- devdbg(usbdev, "SIOCSIWESSID: [flags:%d,len:%d] '%.32s'",
- wrqu->essid.flags, wrqu->essid.length, essid);
+ if (channel)
+ chan = ieee80211_frequency_to_channel(channel->center_freq);
- if (length > NDIS_802_11_LENGTH_SSID)
- length = NDIS_802_11_LENGTH_SSID;
+ groupwise = rndis_cipher_to_alg(sme->crypto.cipher_group);
+ for (i = 0; i < sme->crypto.n_ciphers_pairwise; i++)
+ pairwise |=
+ rndis_cipher_to_alg(sme->crypto.ciphers_pairwise[i]);
- ssid.length = cpu_to_le32(length);
- if (length > 0)
- memcpy(ssid.essid, essid, length);
- else
- memset(ssid.essid, 0, NDIS_802_11_LENGTH_SSID);
-
- set_assoc_params(usbdev);
-
- if (!wrqu->essid.flags || length == 0)
- return disassociate(usbdev, 1);
- else
- return set_essid(usbdev, &ssid);
-}
-
-
-static int rndis_iw_get_essid(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *essid)
-{
- struct ndis_80211_ssid ssid;
- struct usbnet *usbdev = netdev_priv(dev);
- int ret;
-
- ret = get_essid(usbdev, &ssid);
-
- if (ret == 0 && le32_to_cpu(ssid.length) > 0) {
- wrqu->essid.flags = 1;
- wrqu->essid.length = le32_to_cpu(ssid.length);
- memcpy(essid, ssid.essid, wrqu->essid.length);
- essid[wrqu->essid.length] = 0;
- } else {
- memset(essid, 0, sizeof(NDIS_802_11_LENGTH_SSID));
- wrqu->essid.flags = 0;
- wrqu->essid.length = 0;
- }
- devdbg(usbdev, "SIOCGIWESSID: %s", essid);
- return ret;
-}
-
-
-static int rndis_iw_get_bssid(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- unsigned char bssid[ETH_ALEN];
- int ret;
-
- ret = get_bssid(usbdev, bssid);
-
- if (ret == 0)
- devdbg(usbdev, "SIOCGIWAP: %pM", bssid);
- else
- devdbg(usbdev, "SIOCGIWAP: <not associated>");
-
- wrqu->ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(wrqu->ap_addr.sa_data, bssid, ETH_ALEN);
-
- return ret;
-}
-
-
-static int rndis_iw_set_bssid(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- u8 *bssid = (u8 *)wrqu->ap_addr.sa_data;
- int ret;
-
- devdbg(usbdev, "SIOCSIWAP: %pM", bssid);
-
- ret = rndis_set_oid(usbdev, OID_802_11_BSSID, bssid, ETH_ALEN);
-
- /* user apps may set ap's mac address, which is not required;
- * they may fail to work if this function fails, so return
- * success */
- if (ret)
- devwarn(usbdev, "setting AP mac address failed (%08X)", ret);
-
- return 0;
-}
-
-
-static int rndis_iw_set_auth(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct iw_param *p = &wrqu->param;
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- int ret = -ENOTSUPP;
-
- switch (p->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- devdbg(usbdev, "SIOCSIWAUTH: WPA_VERSION, %08x", p->value);
- priv->wpa_version = p->value;
- ret = 0;
- break;
-
- case IW_AUTH_CIPHER_PAIRWISE:
- devdbg(usbdev, "SIOCSIWAUTH: CIPHER_PAIRWISE, %08x", p->value);
- priv->wpa_cipher_pair = p->value;
- ret = 0;
- break;
-
- case IW_AUTH_CIPHER_GROUP:
- devdbg(usbdev, "SIOCSIWAUTH: CIPHER_GROUP, %08x", p->value);
- priv->wpa_cipher_group = p->value;
- ret = 0;
- break;
-
- case IW_AUTH_KEY_MGMT:
- devdbg(usbdev, "SIOCSIWAUTH: KEY_MGMT, %08x", p->value);
- priv->wpa_keymgmt = p->value;
- ret = 0;
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- devdbg(usbdev, "SIOCSIWAUTH: TKIP_COUNTERMEASURES, %08x",
- p->value);
- ret = 0;
- break;
-
- case IW_AUTH_DROP_UNENCRYPTED:
- devdbg(usbdev, "SIOCSIWAUTH: DROP_UNENCRYPTED, %08x", p->value);
- ret = 0;
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- devdbg(usbdev, "SIOCSIWAUTH: 80211_AUTH_ALG, %08x", p->value);
- priv->wpa_authalg = p->value;
- ret = 0;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- devdbg(usbdev, "SIOCSIWAUTH: WPA_ENABLED, %08x", p->value);
- if (wrqu->param.value)
- deauthenticate(usbdev);
- ret = 0;
- break;
-
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- devdbg(usbdev, "SIOCSIWAUTH: RX_UNENCRYPTED_EAPOL, %08x",
- p->value);
- ret = 0;
- break;
-
- case IW_AUTH_ROAMING_CONTROL:
- devdbg(usbdev, "SIOCSIWAUTH: ROAMING_CONTROL, %08x", p->value);
- ret = 0;
- break;
-
- case IW_AUTH_PRIVACY_INVOKED:
- devdbg(usbdev, "SIOCSIWAUTH: invalid cmd %d",
- wrqu->param.flags & IW_AUTH_INDEX);
- return -EOPNOTSUPP;
-
- default:
- devdbg(usbdev, "SIOCSIWAUTH: UNKNOWN %08x, %08x",
- p->flags & IW_AUTH_INDEX, p->value);
- }
- return ret;
-}
-
-
-static int rndis_iw_get_auth(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct iw_param *p = &wrqu->param;
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
-
- switch (p->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- p->value = priv->wpa_version;
- break;
- case IW_AUTH_CIPHER_PAIRWISE:
- p->value = priv->wpa_cipher_pair;
- break;
- case IW_AUTH_CIPHER_GROUP:
- p->value = priv->wpa_cipher_group;
- break;
- case IW_AUTH_KEY_MGMT:
- p->value = priv->wpa_keymgmt;
- break;
- case IW_AUTH_80211_AUTH_ALG:
- p->value = priv->wpa_authalg;
- break;
- default:
- devdbg(usbdev, "SIOCGIWAUTH: invalid cmd %d",
- wrqu->param.flags & IW_AUTH_INDEX);
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-
-static int rndis_iw_set_encode(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- int ret, index, key_len;
- u8 *key;
-
- index = (wrqu->encoding.flags & IW_ENCODE_INDEX);
-
- /* iwconfig gives index as 1 - N */
- if (index > 0)
- index--;
- else
- index = priv->encr_tx_key_index;
-
- if (index < 0 || index >= 4) {
- devwarn(usbdev, "encryption index out of range (%u)", index);
- return -EINVAL;
+ if (sme->crypto.n_ciphers_pairwise > 0 &&
+ pairwise == RNDIS_WLAN_ALG_NONE) {
+ deverr(usbdev, "Unsupported pairwise cipher");
+ return -ENOTSUPP;
}
- /* remove key if disabled */
- if (wrqu->data.flags & IW_ENCODE_DISABLED) {
- if (remove_key(usbdev, index, NULL))
- return -EINVAL;
- else
- return 0;
+ for (i = 0; i < sme->crypto.n_akm_suites; i++)
+ keymgmt |=
+ rndis_akm_suite_to_key_mgmt(sme->crypto.akm_suites[i]);
+
+ if (sme->crypto.n_akm_suites > 0 &&
+ keymgmt == RNDIS_WLAN_KEY_MGMT_NONE) {
+ deverr(usbdev, "Invalid keymgmt");
+ return -ENOTSUPP;
}
- /* global encryption state (for all keys) */
- if (wrqu->data.flags & IW_ENCODE_OPEN)
- ret = set_auth_mode(usbdev, IW_AUTH_WPA_VERSION_DISABLED,
- IW_AUTH_ALG_OPEN_SYSTEM);
- else /*if (wrqu->data.flags & IW_ENCODE_RESTRICTED)*/
- ret = set_auth_mode(usbdev, IW_AUTH_WPA_VERSION_DISABLED,
- IW_AUTH_ALG_SHARED_KEY);
- if (ret != 0)
- return ret;
+ devdbg(usbdev, "cfg80211.connect('%.32s':[%pM]:%d:[%d,0x%x:0x%x]:[0x%x:"
+ "0x%x]:0x%x)", sme->ssid, sme->bssid, chan,
+ sme->privacy, sme->crypto.wpa_versions, sme->auth_type,
+ groupwise, pairwise, keymgmt);
- if (wrqu->data.length > 0) {
- key_len = wrqu->data.length;
- key = extra;
- } else {
- /* must be set as tx key */
- if (priv->encr_key_len[index] == 0)
- return -EINVAL;
- key_len = priv->encr_key_len[index];
- key = priv->encr_keys[index];
- priv->encr_tx_key_index = index;
- }
-
- if (add_wep_key(usbdev, key, key_len, index) != 0)
- return -EINVAL;
-
- if (index == priv->encr_tx_key_index)
- /* ndis drivers want essid to be set after setting encr */
- set_essid(usbdev, &priv->essid);
-
- return 0;
-}
-
-
-static int rndis_iw_set_encode_ext(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- int keyidx, flags;
-
- keyidx = wrqu->encoding.flags & IW_ENCODE_INDEX;
-
- /* iwconfig gives index as 1 - N */
- if (keyidx)
- keyidx--;
- else
- keyidx = priv->encr_tx_key_index;
-
- if (keyidx < 0 || keyidx >= 4)
- return -EINVAL;
-
- if (ext->alg == WPA_ALG_WEP) {
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
- priv->encr_tx_key_index = keyidx;
- return add_wep_key(usbdev, ext->key, ext->key_len, keyidx);
- }
-
- if ((wrqu->encoding.flags & IW_ENCODE_DISABLED) ||
- ext->alg == IW_ENCODE_ALG_NONE || ext->key_len == 0)
- return remove_key(usbdev, keyidx, NULL);
-
- flags = 0;
- if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
- flags |= NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ;
- if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY))
- flags |= NDIS_80211_ADDKEY_PAIRWISE_KEY;
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
- flags |= NDIS_80211_ADDKEY_TRANSMIT_KEY;
-
- return add_wpa_key(usbdev, ext->key, ext->key_len, keyidx, &ext->addr,
- ext->rx_seq, ext->alg, flags);
-}
-
-
-static int rndis_iw_set_genie(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- int ret = 0;
-
-#ifdef DEBUG
- int j;
- u8 *gie = extra;
- for (j = 0; j < wrqu->data.length; j += 8)
- devdbg(usbdev,
- "SIOCSIWGENIE %04x - "
- "%02x %02x %02x %02x %02x %02x %02x %02x", j,
- gie[j + 0], gie[j + 1], gie[j + 2], gie[j + 3],
- gie[j + 4], gie[j + 5], gie[j + 6], gie[j + 7]);
-#endif
- /* clear existing IEs */
- if (priv->wpa_ie_len) {
- kfree(priv->wpa_ie);
- priv->wpa_ie_len = 0;
- }
-
- /* set new IEs */
- priv->wpa_ie = kmalloc(wrqu->data.length, GFP_KERNEL);
- if (priv->wpa_ie) {
- priv->wpa_ie_len = wrqu->data.length;
- memcpy(priv->wpa_ie, extra, priv->wpa_ie_len);
- } else
- ret = -ENOMEM;
- return ret;
-}
-
-
-static int rndis_iw_get_genie(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
-
- devdbg(usbdev, "SIOCGIWGENIE");
-
- if (priv->wpa_ie_len == 0 || priv->wpa_ie == NULL) {
- wrqu->data.length = 0;
- return 0;
- }
-
- if (wrqu->data.length < priv->wpa_ie_len)
- return -E2BIG;
-
- wrqu->data.length = priv->wpa_ie_len;
- memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
-
- return 0;
-}
-
-
-static int rndis_iw_set_rts(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- __le32 tmp;
- devdbg(usbdev, "SIOCSIWRTS");
-
- tmp = cpu_to_le32(wrqu->rts.value);
- return rndis_set_oid(usbdev, OID_802_11_RTS_THRESHOLD, &tmp,
- sizeof(tmp));
-}
-
-
-static int rndis_iw_get_rts(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- __le32 tmp;
- int len, ret;
-
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_802_11_RTS_THRESHOLD, &tmp, &len);
- if (ret == 0) {
- wrqu->rts.value = le32_to_cpu(tmp);
- wrqu->rts.flags = 1;
- wrqu->rts.disabled = 0;
- }
-
- devdbg(usbdev, "SIOCGIWRTS: %d", wrqu->rts.value);
-
- return ret;
-}
-
-
-static int rndis_iw_set_frag(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- __le32 tmp;
-
- devdbg(usbdev, "SIOCSIWFRAG");
-
- tmp = cpu_to_le32(wrqu->frag.value);
- return rndis_set_oid(usbdev, OID_802_11_FRAGMENTATION_THRESHOLD, &tmp,
- sizeof(tmp));
-}
-
-
-static int rndis_iw_get_frag(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- __le32 tmp;
- int len, ret;
-
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_802_11_FRAGMENTATION_THRESHOLD, &tmp,
- &len);
- if (ret == 0) {
- wrqu->frag.value = le32_to_cpu(tmp);
- wrqu->frag.flags = 1;
- wrqu->frag.disabled = 0;
- }
- devdbg(usbdev, "SIOCGIWFRAG: %d", wrqu->frag.value);
- return ret;
-}
-
-
-static int rndis_iw_set_freq(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct ndis_80211_conf config;
- unsigned int dsconfig;
- int len, ret;
-
- /* this OID is valid only when not associated */
if (is_associated(usbdev))
- return 0;
+ disassociate(usbdev, false);
- dsconfig = 0;
- if (freq_to_dsconfig(&wrqu->freq, &dsconfig))
- return -EINVAL;
-
- len = sizeof(config);
- ret = rndis_query_oid(usbdev, OID_802_11_CONFIGURATION, &config, &len);
- if (ret != 0) {
- devdbg(usbdev, "SIOCSIWFREQ: querying configuration failed");
- return 0;
+ ret = set_infra_mode(usbdev, NDIS_80211_INFRA_INFRA);
+ if (ret < 0) {
+ devdbg(usbdev, "connect: set_infra_mode failed, %d", ret);
+ goto err_turn_radio_on;
}
- config.ds_config = cpu_to_le32(dsconfig);
-
- devdbg(usbdev, "SIOCSIWFREQ: %d * 10^%d", wrqu->freq.m, wrqu->freq.e);
- return rndis_set_oid(usbdev, OID_802_11_CONFIGURATION, &config,
- sizeof(config));
-}
-
-
-static int rndis_iw_get_freq(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct ndis_80211_conf config;
- int len, ret;
-
- len = sizeof(config);
- ret = rndis_query_oid(usbdev, OID_802_11_CONFIGURATION, &config, &len);
- if (ret == 0)
- dsconfig_to_freq(le32_to_cpu(config.ds_config), &wrqu->freq);
-
- devdbg(usbdev, "SIOCGIWFREQ: %d", wrqu->freq.m);
- return ret;
-}
-
-
-static int rndis_iw_get_txpower(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- __le32 tx_power;
-
- if (priv->radio_on) {
- /* fake since changing tx_power (by userlevel) not supported */
- tx_power = cpu_to_le32(get_bcm4320_power(priv));
-
- wrqu->txpower.flags = IW_TXPOW_MWATT;
- wrqu->txpower.value = le32_to_cpu(tx_power);
- wrqu->txpower.disabled = 0;
- } else {
- wrqu->txpower.flags = IW_TXPOW_MWATT;
- wrqu->txpower.value = 0;
- wrqu->txpower.disabled = 1;
+ ret = set_auth_mode(usbdev, sme->crypto.wpa_versions, sme->auth_type,
+ keymgmt);
+ if (ret < 0) {
+ devdbg(usbdev, "connect: set_auth_mode failed, %d", ret);
+ goto err_turn_radio_on;
}
- devdbg(usbdev, "SIOCGIWTXPOW: %d", wrqu->txpower.value);
+ set_priv_filter(usbdev);
- return 0;
-}
+ ret = set_encr_mode(usbdev, pairwise, groupwise);
+ if (ret < 0) {
+ devdbg(usbdev, "connect: set_encr_mode failed, %d", ret);
+ goto err_turn_radio_on;
+ }
-
-static int rndis_iw_set_txpower(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- __le32 tx_power = 0;
-
- if (!wrqu->txpower.disabled) {
- if (wrqu->txpower.flags == IW_TXPOW_MWATT)
- tx_power = cpu_to_le32(wrqu->txpower.value);
- else { /* wrqu->txpower.flags == IW_TXPOW_DBM */
- if (wrqu->txpower.value > 20)
- tx_power = cpu_to_le32(128);
- else if (wrqu->txpower.value < -43)
- tx_power = cpu_to_le32(127);
- else {
- signed char tmp;
- tmp = wrqu->txpower.value;
- tmp = -12 - tmp;
- tmp <<= 2;
- tx_power = cpu_to_le32((unsigned char)tmp);
- }
+ if (channel) {
+ ret = set_channel(usbdev, chan);
+ if (ret < 0) {
+ devdbg(usbdev, "connect: set_channel failed, %d", ret);
+ goto err_turn_radio_on;
}
}
- devdbg(usbdev, "SIOCSIWTXPOW: %d", le32_to_cpu(tx_power));
-
- if (le32_to_cpu(tx_power) != 0) {
- /* txpower unsupported, just turn radio on */
- if (!priv->radio_on)
- return disassociate(usbdev, 1);
- return 0; /* all ready on */
+ if (sme->key && ((groupwise | pairwise) & RNDIS_WLAN_ALG_WEP)) {
+ priv->encr_tx_key_index = sme->key_idx;
+ ret = add_wep_key(usbdev, sme->key, sme->key_len, sme->key_idx);
+ if (ret < 0) {
+ devdbg(usbdev, "connect: add_wep_key failed, %d "
+ "(%d, %d)", ret, sme->key_len, sme->key_idx);
+ goto err_turn_radio_on;
+ }
}
- /* tx_power == 0, turn off radio */
- return disassociate(usbdev, 0);
-}
+ if (sme->bssid && !is_zero_ether_addr(sme->bssid) &&
+ !is_broadcast_ether_addr(sme->bssid)) {
+ ret = set_bssid(usbdev, sme->bssid);
+ if (ret < 0) {
+ devdbg(usbdev, "connect: set_bssid failed, %d", ret);
+ goto err_turn_radio_on;
+ }
+ } else
+ clear_bssid(usbdev);
+ length = sme->ssid_len;
+ if (length > NDIS_802_11_LENGTH_SSID)
+ length = NDIS_802_11_LENGTH_SSID;
-static int rndis_iw_get_rate(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- __le32 tmp;
- int ret, len;
+ memset(&ssid, 0, sizeof(ssid));
+ ssid.length = cpu_to_le32(length);
+ memcpy(ssid.essid, sme->ssid, length);
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_GEN_LINK_SPEED, &tmp, &len);
- if (ret == 0) {
- wrqu->bitrate.value = le32_to_cpu(tmp) * 100;
- wrqu->bitrate.disabled = 0;
- wrqu->bitrate.flags = 1;
- }
+ /* Pause and purge rx queue, so we don't pass packets before
+ * 'media connect'-indication.
+ */
+ usbnet_pause_rx(usbdev);
+ usbnet_purge_paused_rxq(usbdev);
+
+ ret = set_essid(usbdev, &ssid);
+ if (ret < 0)
+ devdbg(usbdev, "connect: set_essid failed, %d", ret);
+ return ret;
+
+err_turn_radio_on:
+ disassociate(usbdev, true);
+
return ret;
}
-
-static int rndis_iw_set_mlme(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
+static int rndis_disconnect(struct wiphy *wiphy, struct net_device *dev,
+ u16 reason_code)
{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- struct iw_mlme *mlme = (struct iw_mlme *)extra;
- unsigned char bssid[ETH_ALEN];
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
- get_bssid(usbdev, bssid);
+ devdbg(usbdev, "cfg80211.disconnect(%d)", reason_code);
- if (memcmp(bssid, mlme->addr.sa_data, ETH_ALEN))
- return -EINVAL;
+ priv->connected = false;
+ memset(priv->bssid, 0, ETH_ALEN);
- switch (mlme->cmd) {
- case IW_MLME_DEAUTH:
- return deauthenticate(usbdev);
- case IW_MLME_DISASSOC:
- return disassociate(usbdev, priv->radio_on);
- default:
- return -EOPNOTSUPP;
+ return deauthenticate(usbdev);
+}
+
+static int rndis_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_ibss_params *params)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+ struct ieee80211_channel *channel = params->channel;
+ struct ndis_80211_ssid ssid;
+ enum nl80211_auth_type auth_type;
+ int ret, alg, length, chan = -1;
+
+ if (channel)
+ chan = ieee80211_frequency_to_channel(channel->center_freq);
+
+ /* TODO: How to handle ad-hoc encryption?
+ * connect() has *key, join_ibss() doesn't. RNDIS requires key to be
+ * pre-shared for encryption (open/shared/wpa), is key set before
+ * join_ibss? Which auth_type to use (not in params)? What about WPA?
+ */
+ if (params->privacy) {
+ auth_type = NL80211_AUTHTYPE_SHARED_KEY;
+ alg = RNDIS_WLAN_ALG_WEP;
+ } else {
+ auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM;
+ alg = RNDIS_WLAN_ALG_NONE;
}
+ devdbg(usbdev, "cfg80211.join_ibss('%.32s':[%pM]:%d:%d)", params->ssid,
+ params->bssid, chan, params->privacy);
+
+ if (is_associated(usbdev))
+ disassociate(usbdev, false);
+
+ ret = set_infra_mode(usbdev, NDIS_80211_INFRA_ADHOC);
+ if (ret < 0) {
+ devdbg(usbdev, "join_ibss: set_infra_mode failed, %d", ret);
+ goto err_turn_radio_on;
+ }
+
+ ret = set_auth_mode(usbdev, 0, auth_type, RNDIS_WLAN_KEY_MGMT_NONE);
+ if (ret < 0) {
+ devdbg(usbdev, "join_ibss: set_auth_mode failed, %d", ret);
+ goto err_turn_radio_on;
+ }
+
+ set_priv_filter(usbdev);
+
+ ret = set_encr_mode(usbdev, alg, RNDIS_WLAN_ALG_NONE);
+ if (ret < 0) {
+ devdbg(usbdev, "join_ibss: set_encr_mode failed, %d", ret);
+ goto err_turn_radio_on;
+ }
+
+ if (channel) {
+ ret = set_channel(usbdev, chan);
+ if (ret < 0) {
+ devdbg(usbdev, "join_ibss: set_channel failed, %d",
+ ret);
+ goto err_turn_radio_on;
+ }
+ }
+
+ if (params->bssid && !is_zero_ether_addr(params->bssid) &&
+ !is_broadcast_ether_addr(params->bssid)) {
+ ret = set_bssid(usbdev, params->bssid);
+ if (ret < 0) {
+ devdbg(usbdev, "join_ibss: set_bssid failed, %d", ret);
+ goto err_turn_radio_on;
+ }
+ } else
+ clear_bssid(usbdev);
+
+ length = params->ssid_len;
+ if (length > NDIS_802_11_LENGTH_SSID)
+ length = NDIS_802_11_LENGTH_SSID;
+
+ memset(&ssid, 0, sizeof(ssid));
+ ssid.length = cpu_to_le32(length);
+ memcpy(ssid.essid, params->ssid, length);
+
+ /* Don't need to pause rx queue for ad-hoc. */
+ usbnet_purge_paused_rxq(usbdev);
+ usbnet_resume_rx(usbdev);
+
+ ret = set_essid(usbdev, &ssid);
+ if (ret < 0)
+ devdbg(usbdev, "join_ibss: set_essid failed, %d", ret);
+ return ret;
+
+err_turn_radio_on:
+ disassociate(usbdev, true);
+
+ return ret;
+}
+
+static int rndis_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ devdbg(usbdev, "cfg80211.leave_ibss()");
+
+ priv->connected = false;
+ memset(priv->bssid, 0, ETH_ALEN);
+
+ return deauthenticate(usbdev);
+}
+
+static int rndis_set_channel(struct wiphy *wiphy,
+ struct ieee80211_channel *chan, enum nl80211_channel_type channel_type)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ return set_channel(usbdev,
+ ieee80211_frequency_to_channel(chan->center_freq));
+}
+
+static int rndis_add_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, const u8 *mac_addr,
+ struct key_params *params)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+ __le32 flags;
+
+ devdbg(usbdev, "rndis_add_key(%i, %pM, %08x)", key_index, mac_addr,
+ params->cipher);
+
+ switch (params->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ return add_wep_key(usbdev, params->key, params->key_len,
+ key_index);
+ case WLAN_CIPHER_SUITE_TKIP:
+ case WLAN_CIPHER_SUITE_CCMP:
+ flags = 0;
+
+ if (params->seq && params->seq_len > 0)
+ flags |= NDIS_80211_ADDKEY_SET_INIT_RECV_SEQ;
+ if (mac_addr)
+ flags |= NDIS_80211_ADDKEY_PAIRWISE_KEY |
+ NDIS_80211_ADDKEY_TRANSMIT_KEY;
+
+ return add_wpa_key(usbdev, params->key, params->key_len,
+ key_index, mac_addr, params->seq,
+ params->seq_len, params->cipher, flags);
+ default:
+ devdbg(usbdev, "rndis_add_key: unsupported cipher %08x",
+ params->cipher);
+ return -ENOTSUPP;
+ }
+}
+
+static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index, const u8 *mac_addr)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ devdbg(usbdev, "rndis_del_key(%i, %pM)", key_index, mac_addr);
+
+ return remove_key(usbdev, key_index, mac_addr);
+}
+
+static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
+ u8 key_index)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+ struct rndis_wlan_encr_key key;
+
+ devdbg(usbdev, "rndis_set_default_key(%i)", key_index);
+
+ priv->encr_tx_key_index = key_index;
+
+ key = priv->encr_keys[key_index];
+
+ return add_wep_key(usbdev, key.material, key.len, key_index);
+}
+
+static void rndis_fill_station_info(struct usbnet *usbdev,
+ struct station_info *sinfo)
+{
+ __le32 linkspeed, rssi;
+ int ret, len;
+
+ memset(sinfo, 0, sizeof(*sinfo));
+
+ len = sizeof(linkspeed);
+ ret = rndis_query_oid(usbdev, OID_GEN_LINK_SPEED, &linkspeed, &len);
+ if (ret == 0) {
+ sinfo->txrate.legacy = le32_to_cpu(linkspeed) / 1000;
+ sinfo->filled |= STATION_INFO_TX_BITRATE;
+ }
+
+ len = sizeof(rssi);
+ ret = rndis_query_oid(usbdev, OID_802_11_RSSI, &rssi, &len);
+ if (ret == 0) {
+ sinfo->signal = level_to_qual(le32_to_cpu(rssi));
+ sinfo->filled |= STATION_INFO_SIGNAL;
+ }
+}
+
+static int rndis_get_station(struct wiphy *wiphy, struct net_device *dev,
+ u8 *mac, struct station_info *sinfo)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ if (compare_ether_addr(priv->bssid, mac))
+ return -ENOENT;
+
+ rndis_fill_station_info(usbdev, sinfo);
+
return 0;
}
-
-static struct iw_statistics *rndis_get_wireless_stats(struct net_device *dev)
+static int rndis_dump_station(struct wiphy *wiphy, struct net_device *dev,
+ int idx, u8 *mac, struct station_info *sinfo)
{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- unsigned long flags;
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
- spin_lock_irqsave(&priv->stats_lock, flags);
- memcpy(&priv->iwstats, &priv->privstats, sizeof(priv->iwstats));
- spin_unlock_irqrestore(&priv->stats_lock, flags);
+ if (idx != 0)
+ return -ENOENT;
- return &priv->iwstats;
+ memcpy(mac, priv->bssid, ETH_ALEN);
+
+ rndis_fill_station_info(usbdev, sinfo);
+
+ return 0;
}
-
-#define IW_IOCTL(x) [(x) - SIOCSIWCOMMIT]
-static const iw_handler rndis_iw_handler[] =
+/*
+ * workers, indication handlers, device poller
+ */
+static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
{
- IW_IOCTL(SIOCSIWCOMMIT) = rndis_iw_commit,
- IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
- IW_IOCTL(SIOCSIWFREQ) = rndis_iw_set_freq,
- IW_IOCTL(SIOCGIWFREQ) = rndis_iw_get_freq,
- IW_IOCTL(SIOCSIWMODE) = (iw_handler) cfg80211_wext_siwmode,
- IW_IOCTL(SIOCGIWMODE) = (iw_handler) cfg80211_wext_giwmode,
- IW_IOCTL(SIOCGIWRANGE) = (iw_handler) cfg80211_wext_giwrange,
- IW_IOCTL(SIOCSIWAP) = rndis_iw_set_bssid,
- IW_IOCTL(SIOCGIWAP) = rndis_iw_get_bssid,
- IW_IOCTL(SIOCSIWSCAN) = (iw_handler) cfg80211_wext_siwscan,
- IW_IOCTL(SIOCGIWSCAN) = (iw_handler) cfg80211_wext_giwscan,
- IW_IOCTL(SIOCSIWESSID) = rndis_iw_set_essid,
- IW_IOCTL(SIOCGIWESSID) = rndis_iw_get_essid,
- IW_IOCTL(SIOCGIWRATE) = rndis_iw_get_rate,
- IW_IOCTL(SIOCSIWRTS) = rndis_iw_set_rts,
- IW_IOCTL(SIOCGIWRTS) = rndis_iw_get_rts,
- IW_IOCTL(SIOCSIWFRAG) = rndis_iw_set_frag,
- IW_IOCTL(SIOCGIWFRAG) = rndis_iw_get_frag,
- IW_IOCTL(SIOCSIWTXPOW) = rndis_iw_set_txpower,
- IW_IOCTL(SIOCGIWTXPOW) = rndis_iw_get_txpower,
- IW_IOCTL(SIOCSIWENCODE) = rndis_iw_set_encode,
- IW_IOCTL(SIOCSIWENCODEEXT) = rndis_iw_set_encode_ext,
- IW_IOCTL(SIOCSIWAUTH) = rndis_iw_set_auth,
- IW_IOCTL(SIOCGIWAUTH) = rndis_iw_get_auth,
- IW_IOCTL(SIOCSIWGENIE) = rndis_iw_set_genie,
- IW_IOCTL(SIOCGIWGENIE) = rndis_iw_get_genie,
- IW_IOCTL(SIOCSIWMLME) = rndis_iw_set_mlme,
-};
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ struct ndis_80211_assoc_info *info;
+ u8 assoc_buf[sizeof(*info) + IW_CUSTOM_MAX + 32];
+ u8 bssid[ETH_ALEN];
+ int resp_ie_len, req_ie_len;
+ u8 *req_ie, *resp_ie;
+ int ret, offset;
+ bool roamed = false;
-static const iw_handler rndis_wlan_private_handler[] = {
-};
+ if (priv->infra_mode == NDIS_80211_INFRA_INFRA && priv->connected) {
+ /* received media connect indication while connected, either
+ * device reassociated with same AP or roamed to new. */
+ roamed = true;
+ }
-static const struct iw_priv_args rndis_wlan_private_args[] = {
-};
+ req_ie_len = 0;
+ resp_ie_len = 0;
+ req_ie = NULL;
+ resp_ie = NULL;
+ if (priv->infra_mode == NDIS_80211_INFRA_INFRA) {
+ memset(assoc_buf, 0, sizeof(assoc_buf));
+ info = (void *)assoc_buf;
-static const struct iw_handler_def rndis_iw_handlers = {
- .num_standard = ARRAY_SIZE(rndis_iw_handler),
- .num_private = ARRAY_SIZE(rndis_wlan_private_handler),
- .num_private_args = ARRAY_SIZE(rndis_wlan_private_args),
- .standard = (iw_handler *)rndis_iw_handler,
- .private = (iw_handler *)rndis_wlan_private_handler,
- .private_args = (struct iw_priv_args *)rndis_wlan_private_args,
- .get_wireless_stats = rndis_get_wireless_stats,
-};
+ /* Get association info IEs from device and send them back to
+ * userspace. */
+ ret = get_association_info(usbdev, info, sizeof(assoc_buf));
+ if (!ret) {
+ req_ie_len = le32_to_cpu(info->req_ie_length);
+ if (req_ie_len > 0) {
+ offset = le32_to_cpu(info->offset_req_ies);
+ req_ie = (u8 *)info + offset;
+ }
+ resp_ie_len = le32_to_cpu(info->resp_ie_length);
+ if (resp_ie_len > 0) {
+ offset = le32_to_cpu(info->offset_resp_ies);
+ resp_ie = (u8 *)info + offset;
+ }
+ }
+ } else if (WARN_ON(priv->infra_mode != NDIS_80211_INFRA_ADHOC))
+ return;
+
+ ret = get_bssid(usbdev, bssid);
+ if (ret < 0)
+ memset(bssid, 0, sizeof(bssid));
+
+ devdbg(usbdev, "link up work: [%pM] %s", bssid, roamed ? "roamed" : "");
+
+ /* Internal bss list in device always contains at least the currently
+ * connected bss and we can get it to cfg80211 with
+ * rndis_check_bssid_list().
+ * NOTE: This is true for Broadcom chip, but not mentioned in RNDIS
+ * spec.
+ */
+ rndis_check_bssid_list(usbdev);
+
+ if (priv->infra_mode == NDIS_80211_INFRA_INFRA) {
+ if (!roamed)
+ cfg80211_connect_result(usbdev->net, bssid, req_ie,
+ req_ie_len, resp_ie,
+ resp_ie_len, 0, GFP_KERNEL);
+ else
+ cfg80211_roamed(usbdev->net, bssid, req_ie, req_ie_len,
+ resp_ie, resp_ie_len, GFP_KERNEL);
+ } else if (priv->infra_mode == NDIS_80211_INFRA_ADHOC)
+ cfg80211_ibss_joined(usbdev->net, bssid, GFP_KERNEL);
+
+ priv->connected = true;
+ memcpy(priv->bssid, bssid, ETH_ALEN);
+
+ usbnet_resume_rx(usbdev);
+ netif_carrier_on(usbdev->net);
+}
+
+static void rndis_wlan_do_link_down_work(struct usbnet *usbdev)
+{
+ union iwreq_data evt;
+
+ netif_carrier_off(usbdev->net);
+
+ evt.data.flags = 0;
+ evt.data.length = 0;
+ memset(evt.ap_addr.sa_data, 0, ETH_ALEN);
+ wireless_send_event(usbdev->net, SIOCGIWAP, &evt, NULL);
+}
static void rndis_wlan_worker(struct work_struct *work)
{
struct rndis_wlan_private *priv =
container_of(work, struct rndis_wlan_private, work);
struct usbnet *usbdev = priv->usbdev;
- union iwreq_data evt;
- unsigned char bssid[ETH_ALEN];
- struct ndis_80211_assoc_info *info;
- int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32;
- int ret, offset;
- if (test_and_clear_bit(WORK_LINK_UP, &priv->work_pending)) {
- netif_carrier_on(usbdev->net);
+ if (test_and_clear_bit(WORK_LINK_UP, &priv->work_pending))
+ rndis_wlan_do_link_up_work(usbdev);
- info = kzalloc(assoc_size, GFP_KERNEL);
- if (!info)
- goto get_bssid;
-
- /* Get association info IEs from device and send them back to
- * userspace. */
- ret = get_association_info(usbdev, info, assoc_size);
- if (!ret) {
- evt.data.length = le32_to_cpu(info->req_ie_length);
- if (evt.data.length > 0) {
- offset = le32_to_cpu(info->offset_req_ies);
- wireless_send_event(usbdev->net,
- IWEVASSOCREQIE, &evt,
- (char *)info + offset);
- }
-
- evt.data.length = le32_to_cpu(info->resp_ie_length);
- if (evt.data.length > 0) {
- offset = le32_to_cpu(info->offset_resp_ies);
- wireless_send_event(usbdev->net,
- IWEVASSOCRESPIE, &evt,
- (char *)info + offset);
- }
- }
-
- kfree(info);
-
-get_bssid:
- ret = get_bssid(usbdev, bssid);
- if (!ret) {
- evt.data.flags = 0;
- evt.data.length = 0;
- memcpy(evt.ap_addr.sa_data, bssid, ETH_ALEN);
- wireless_send_event(usbdev->net, SIOCGIWAP, &evt, NULL);
- }
- }
-
- if (test_and_clear_bit(WORK_LINK_DOWN, &priv->work_pending)) {
- netif_carrier_off(usbdev->net);
-
- evt.data.flags = 0;
- evt.data.length = 0;
- memset(evt.ap_addr.sa_data, 0, ETH_ALEN);
- wireless_send_event(usbdev->net, SIOCGIWAP, &evt, NULL);
- }
+ if (test_and_clear_bit(WORK_LINK_DOWN, &priv->work_pending))
+ rndis_wlan_do_link_down_work(usbdev);
if (test_and_clear_bit(WORK_SET_MULTICAST_LIST, &priv->work_pending))
set_multicast_list(usbdev);
@@ -2131,15 +2253,233 @@
queue_work(priv->workqueue, &priv->work);
}
-static void rndis_wlan_link_change(struct usbnet *usbdev, int state)
+static void rndis_wlan_auth_indication(struct usbnet *usbdev,
+ struct ndis_80211_status_indication *indication,
+ int len)
{
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ u8 *buf;
+ const char *type;
+ int flags, buflen, key_id;
+ bool pairwise_error, group_error;
+ struct ndis_80211_auth_request *auth_req;
+ enum nl80211_key_type key_type;
- /* queue work to avoid recursive calls into rndis_command */
- set_bit(state ? WORK_LINK_UP : WORK_LINK_DOWN, &priv->work_pending);
- queue_work(priv->workqueue, &priv->work);
+ /* must have at least one array entry */
+ if (len < offsetof(struct ndis_80211_status_indication, u) +
+ sizeof(struct ndis_80211_auth_request)) {
+ devinfo(usbdev, "authentication indication: "
+ "too short message (%i)", len);
+ return;
+ }
+
+ buf = (void *)&indication->u.auth_request[0];
+ buflen = len - offsetof(struct ndis_80211_status_indication, u);
+
+ while (buflen >= sizeof(*auth_req)) {
+ auth_req = (void *)buf;
+ type = "unknown";
+ flags = le32_to_cpu(auth_req->flags);
+ pairwise_error = false;
+ group_error = false;
+
+ if (flags & 0x1)
+ type = "reauth request";
+ if (flags & 0x2)
+ type = "key update request";
+ if (flags & 0x6) {
+ pairwise_error = true;
+ type = "pairwise_error";
+ }
+ if (flags & 0xe) {
+ group_error = true;
+ type = "group_error";
+ }
+
+ devinfo(usbdev, "authentication indication: %s (0x%08x)", type,
+ le32_to_cpu(auth_req->flags));
+
+ if (pairwise_error) {
+ key_type = NL80211_KEYTYPE_PAIRWISE;
+ key_id = -1;
+
+ cfg80211_michael_mic_failure(usbdev->net,
+ auth_req->bssid,
+ key_type, key_id, NULL,
+ GFP_KERNEL);
+ }
+
+ if (group_error) {
+ key_type = NL80211_KEYTYPE_GROUP;
+ key_id = -1;
+
+ cfg80211_michael_mic_failure(usbdev->net,
+ auth_req->bssid,
+ key_type, key_id, NULL,
+ GFP_KERNEL);
+ }
+
+ buflen -= le32_to_cpu(auth_req->length);
+ buf += le32_to_cpu(auth_req->length);
+ }
}
+static void rndis_wlan_pmkid_cand_list_indication(struct usbnet *usbdev,
+ struct ndis_80211_status_indication *indication,
+ int len)
+{
+ struct ndis_80211_pmkid_cand_list *cand_list;
+ int list_len, expected_len, i;
+
+ if (len < offsetof(struct ndis_80211_status_indication, u) +
+ sizeof(struct ndis_80211_pmkid_cand_list)) {
+ devinfo(usbdev, "pmkid candidate list indication: "
+ "too short message (%i)", len);
+ return;
+ }
+
+ list_len = le32_to_cpu(indication->u.cand_list.num_candidates) *
+ sizeof(struct ndis_80211_pmkid_candidate);
+ expected_len = sizeof(struct ndis_80211_pmkid_cand_list) + list_len +
+ offsetof(struct ndis_80211_status_indication, u);
+
+ if (len < expected_len) {
+ devinfo(usbdev, "pmkid candidate list indication: "
+ "list larger than buffer (%i < %i)",
+ len, expected_len);
+ return;
+ }
+
+ cand_list = &indication->u.cand_list;
+
+ devinfo(usbdev, "pmkid candidate list indication: "
+ "version %i, candidates %i",
+ le32_to_cpu(cand_list->version),
+ le32_to_cpu(cand_list->num_candidates));
+
+ if (le32_to_cpu(cand_list->version) != 1)
+ return;
+
+ for (i = 0; i < le32_to_cpu(cand_list->num_candidates); i++) {
+ struct ndis_80211_pmkid_candidate *cand =
+ &cand_list->candidate_list[i];
+
+ devdbg(usbdev, "cand[%i]: flags: 0x%08x, bssid: %pM",
+ i, le32_to_cpu(cand->flags), cand->bssid);
+
+#if 0
+ struct iw_pmkid_cand pcand;
+ union iwreq_data wrqu;
+
+ memset(&pcand, 0, sizeof(pcand));
+ if (le32_to_cpu(cand->flags) & 0x01)
+ pcand.flags |= IW_PMKID_CAND_PREAUTH;
+ pcand.index = i;
+ memcpy(pcand.bssid.sa_data, cand->bssid, ETH_ALEN);
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = sizeof(pcand);
+ wireless_send_event(usbdev->net, IWEVPMKIDCAND, &wrqu,
+ (u8 *)&pcand);
+#endif
+ }
+}
+
+static void rndis_wlan_media_specific_indication(struct usbnet *usbdev,
+ struct rndis_indicate *msg, int buflen)
+{
+ struct ndis_80211_status_indication *indication;
+ int len, offset;
+
+ offset = offsetof(struct rndis_indicate, status) +
+ le32_to_cpu(msg->offset);
+ len = le32_to_cpu(msg->length);
+
+ if (len < 8) {
+ devinfo(usbdev, "media specific indication, "
+ "ignore too short message (%i < 8)", len);
+ return;
+ }
+
+ if (offset + len > buflen) {
+ devinfo(usbdev, "media specific indication, "
+ "too large to fit to buffer (%i > %i)",
+ offset + len, buflen);
+ return;
+ }
+
+ indication = (void *)((u8 *)msg + offset);
+
+ switch (le32_to_cpu(indication->status_type)) {
+ case NDIS_80211_STATUSTYPE_RADIOSTATE:
+ devinfo(usbdev, "radio state indication: %i",
+ le32_to_cpu(indication->u.radio_status));
+ return;
+
+ case NDIS_80211_STATUSTYPE_MEDIASTREAMMODE:
+ devinfo(usbdev, "media stream mode indication: %i",
+ le32_to_cpu(indication->u.media_stream_mode));
+ return;
+
+ case NDIS_80211_STATUSTYPE_AUTHENTICATION:
+ rndis_wlan_auth_indication(usbdev, indication, len);
+ return;
+
+ case NDIS_80211_STATUSTYPE_PMKID_CANDIDATELIST:
+ rndis_wlan_pmkid_cand_list_indication(usbdev, indication, len);
+ return;
+
+ default:
+ devinfo(usbdev, "media specific indication: "
+ "unknown status type 0x%08x",
+ le32_to_cpu(indication->status_type));
+ }
+}
+
+static void rndis_wlan_indication(struct usbnet *usbdev, void *ind, int buflen)
+{
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ struct rndis_indicate *msg = ind;
+
+ switch (msg->status) {
+ case RNDIS_STATUS_MEDIA_CONNECT:
+ if (priv->current_command_oid == OID_802_11_ADD_KEY) {
+ /* OID_802_11_ADD_KEY causes sometimes extra
+ * "media connect" indications which confuses driver
+ * and userspace to think that device is
+ * roaming/reassociating when it isn't.
+ */
+ devdbg(usbdev, "ignored OID_802_11_ADD_KEY triggered "
+ "'media connect'");
+ return;
+ }
+
+ usbnet_pause_rx(usbdev);
+
+ devinfo(usbdev, "media connect");
+
+ /* queue work to avoid recursive calls into rndis_command */
+ set_bit(WORK_LINK_UP, &priv->work_pending);
+ queue_work(priv->workqueue, &priv->work);
+ break;
+
+ case RNDIS_STATUS_MEDIA_DISCONNECT:
+ devinfo(usbdev, "media disconnect");
+
+ /* queue work to avoid recursive calls into rndis_command */
+ set_bit(WORK_LINK_DOWN, &priv->work_pending);
+ queue_work(priv->workqueue, &priv->work);
+ break;
+
+ case RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION:
+ rndis_wlan_media_specific_indication(usbdev, msg, buflen);
+ break;
+
+ default:
+ devinfo(usbdev, "indication: 0x%08x",
+ le32_to_cpu(msg->status));
+ break;
+ }
+}
static int rndis_wlan_get_caps(struct usbnet *usbdev)
{
@@ -2177,78 +2517,44 @@
return retval;
}
-
-#define STATS_UPDATE_JIFFIES (HZ)
-static void rndis_update_wireless_stats(struct work_struct *work)
+#define DEVICE_POLLER_JIFFIES (HZ)
+static void rndis_device_poller(struct work_struct *work)
{
struct rndis_wlan_private *priv =
- container_of(work, struct rndis_wlan_private, stats_work.work);
+ container_of(work, struct rndis_wlan_private,
+ dev_poller_work.work);
struct usbnet *usbdev = priv->usbdev;
- struct iw_statistics iwstats;
__le32 rssi, tmp;
int len, ret, j;
- unsigned long flags;
- int update_jiffies = STATS_UPDATE_JIFFIES;
+ int update_jiffies = DEVICE_POLLER_JIFFIES;
void *buf;
- spin_lock_irqsave(&priv->stats_lock, flags);
- memcpy(&iwstats, &priv->privstats, sizeof(iwstats));
- spin_unlock_irqrestore(&priv->stats_lock, flags);
-
- /* only update stats when connected */
- if (!is_associated(usbdev)) {
- iwstats.qual.qual = 0;
- iwstats.qual.level = 0;
- iwstats.qual.updated = IW_QUAL_QUAL_UPDATED
- | IW_QUAL_LEVEL_UPDATED
- | IW_QUAL_NOISE_INVALID
- | IW_QUAL_QUAL_INVALID
- | IW_QUAL_LEVEL_INVALID;
+ /* Only check/do workaround when connected. Calling is_associated()
+ * also polls device with rndis_command() and catches for media link
+ * indications.
+ */
+ if (!is_associated(usbdev))
goto end;
- }
len = sizeof(rssi);
ret = rndis_query_oid(usbdev, OID_802_11_RSSI, &rssi, &len);
-
- devdbg(usbdev, "stats: OID_802_11_RSSI -> %d, rssi:%d", ret,
- le32_to_cpu(rssi));
- if (ret == 0) {
- memset(&iwstats.qual, 0, sizeof(iwstats.qual));
- iwstats.qual.qual = level_to_qual(le32_to_cpu(rssi));
- iwstats.qual.level = level_to_qual(le32_to_cpu(rssi));
- iwstats.qual.updated = IW_QUAL_QUAL_UPDATED
- | IW_QUAL_LEVEL_UPDATED
- | IW_QUAL_NOISE_INVALID;
- }
-
- memset(&iwstats.discard, 0, sizeof(iwstats.discard));
-
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_GEN_XMIT_ERROR, &tmp, &len);
if (ret == 0)
- iwstats.discard.misc += le32_to_cpu(tmp);
+ priv->last_qual = level_to_qual(le32_to_cpu(rssi));
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_GEN_RCV_ERROR, &tmp, &len);
- if (ret == 0)
- iwstats.discard.misc += le32_to_cpu(tmp);
-
- len = sizeof(tmp);
- ret = rndis_query_oid(usbdev, OID_GEN_RCV_NO_BUFFER, &tmp, &len);
- if (ret == 0)
- iwstats.discard.misc += le32_to_cpu(tmp);
+ devdbg(usbdev, "dev-poller: OID_802_11_RSSI -> %d, rssi:%d, qual: %d",
+ ret, le32_to_cpu(rssi), level_to_qual(le32_to_cpu(rssi)));
/* Workaround transfer stalls on poor quality links.
* TODO: find right way to fix these stalls (as stalls do not happen
* with ndiswrapper/windows driver). */
- if (iwstats.qual.qual <= 25) {
+ if (priv->last_qual <= 25) {
/* Decrease stats worker interval to catch stalls.
* faster. Faster than 400-500ms causes packet loss,
* Slower doesn't catch stalls fast enough.
*/
j = msecs_to_jiffies(priv->param_workaround_interval);
- if (j > STATS_UPDATE_JIFFIES)
- j = STATS_UPDATE_JIFFIES;
+ if (j > DEVICE_POLLER_JIFFIES)
+ j = DEVICE_POLLER_JIFFIES;
else if (j <= 0)
j = 1;
update_jiffies = j;
@@ -2268,11 +2574,8 @@
rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &len);
kfree(buf);
}
-end:
- spin_lock_irqsave(&priv->stats_lock, flags);
- memcpy(&priv->privstats, &iwstats, sizeof(iwstats));
- spin_unlock_irqrestore(&priv->stats_lock, flags);
+end:
if (update_jiffies >= HZ)
update_jiffies = round_jiffies_relative(update_jiffies);
else {
@@ -2281,10 +2584,13 @@
update_jiffies = j;
}
- queue_delayed_work(priv->workqueue, &priv->stats_work, update_jiffies);
+ queue_delayed_work(priv->workqueue, &priv->dev_poller_work,
+ update_jiffies);
}
-
+/*
+ * driver/device initialization
+ */
static int bcm4320a_early_init(struct usbnet *usbdev)
{
/* bcm4320a doesn't handle configuration parameters well. Try
@@ -2294,7 +2600,6 @@
return 0;
}
-
static int bcm4320b_early_init(struct usbnet *usbdev)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
@@ -2373,7 +2678,6 @@
.ndo_set_multicast_list = rndis_wlan_set_multicast_list,
};
-
static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
{
struct wiphy *wiphy;
@@ -2398,16 +2702,14 @@
* Otherwise we'll be in big trouble in rndis_wlan_early_init().
*/
usbdev->driver_priv = priv;
- usbdev->net->wireless_handlers = &rndis_iw_handlers;
priv->usbdev = usbdev;
mutex_init(&priv->command_lock);
- spin_lock_init(&priv->stats_lock);
/* because rndis_command() sleeps we need to use workqueue */
priv->workqueue = create_singlethread_workqueue("rndis_wlan");
INIT_WORK(&priv->work, rndis_wlan_worker);
- INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+ INIT_DELAYED_WORK(&priv->dev_poller_work, rndis_device_poller);
INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results);
/* try bind rndis_host */
@@ -2439,14 +2741,6 @@
else
usbdev->net->flags &= ~IFF_MULTICAST;
- priv->iwstats.qual.qual = 0;
- priv->iwstats.qual.level = 0;
- priv->iwstats.qual.updated = IW_QUAL_QUAL_UPDATED
- | IW_QUAL_LEVEL_UPDATED
- | IW_QUAL_NOISE_INVALID
- | IW_QUAL_QUAL_INVALID
- | IW_QUAL_LEVEL_INVALID;
-
/* fill-out wiphy structure and register w/ cfg80211 */
memcpy(wiphy->perm_addr, usbdev->net->dev_addr, ETH_ALEN);
wiphy->privid = rndis_wiphy_privid;
@@ -2454,7 +2748,7 @@
| BIT(NL80211_IFTYPE_ADHOC);
wiphy->max_scan_ssids = 1;
- /* TODO: fill-out band information based on priv->caps */
+ /* TODO: fill-out band/encr information based on priv->caps */
rndis_wlan_get_caps(usbdev);
memcpy(priv->channels, rndis_channels, sizeof(rndis_channels));
@@ -2466,6 +2760,11 @@
wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+ memcpy(priv->cipher_suites, rndis_cipher_suites,
+ sizeof(rndis_cipher_suites));
+ wiphy->cipher_suites = priv->cipher_suites;
+ wiphy->n_cipher_suites = ARRAY_SIZE(rndis_cipher_suites);
+
set_wiphy_dev(wiphy, &usbdev->udev->dev);
if (wiphy_register(wiphy)) {
@@ -2475,18 +2774,19 @@
set_default_iw_params(usbdev);
- /* turn radio on */
- priv->radio_on = 1;
- disassociate(usbdev, 1);
- netif_carrier_off(usbdev->net);
+ /* set default rts/frag */
+ rndis_set_wiphy_params(wiphy,
+ WIPHY_PARAM_FRAG_THRESHOLD | WIPHY_PARAM_RTS_THRESHOLD);
- queue_delayed_work(priv->workqueue, &priv->stats_work,
- round_jiffies_relative(STATS_UPDATE_JIFFIES));
+ /* turn radio on */
+ priv->radio_on = true;
+ disassociate(usbdev, true);
+ netif_carrier_off(usbdev->net);
return 0;
fail:
- cancel_delayed_work_sync(&priv->stats_work);
+ cancel_delayed_work_sync(&priv->dev_poller_work);
cancel_delayed_work_sync(&priv->scan_work);
cancel_work_sync(&priv->work);
flush_workqueue(priv->workqueue);
@@ -2496,15 +2796,14 @@
return retval;
}
-
static void rndis_wlan_unbind(struct usbnet *usbdev, struct usb_interface *intf)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
/* turn radio off */
- disassociate(usbdev, 0);
+ disassociate(usbdev, false);
- cancel_delayed_work_sync(&priv->stats_work);
+ cancel_delayed_work_sync(&priv->dev_poller_work);
cancel_delayed_work_sync(&priv->scan_work);
cancel_work_sync(&priv->work);
flush_workqueue(priv->workqueue);
@@ -2519,50 +2818,100 @@
wiphy_free(priv->wdev.wiphy);
}
-
static int rndis_wlan_reset(struct usbnet *usbdev)
{
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ int retval;
+
+ devdbg(usbdev, "rndis_wlan_reset");
+
+ retval = rndis_reset(usbdev);
+ if (retval)
+ devwarn(usbdev, "rndis_reset() failed: %d", retval);
+
+ /* rndis_reset cleared multicast list, so restore here.
+ (set_multicast_list() also turns on current packet filter) */
+ set_multicast_list(usbdev);
+
+ queue_delayed_work(priv->workqueue, &priv->dev_poller_work,
+ round_jiffies_relative(DEVICE_POLLER_JIFFIES));
+
return deauthenticate(usbdev);
}
+static int rndis_wlan_stop(struct usbnet *usbdev)
+{
+ struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+ int retval;
+ __le32 filter;
+
+ devdbg(usbdev, "rndis_wlan_stop");
+
+ retval = disassociate(usbdev, false);
+
+ priv->work_pending = 0;
+ cancel_delayed_work_sync(&priv->dev_poller_work);
+ cancel_delayed_work_sync(&priv->scan_work);
+ cancel_work_sync(&priv->work);
+ flush_workqueue(priv->workqueue);
+
+ if (priv->scan_request) {
+ cfg80211_scan_done(priv->scan_request, true);
+ priv->scan_request = NULL;
+ }
+
+ /* Set current packet filter zero to block receiving data packets from
+ device. */
+ filter = 0;
+ rndis_set_oid(usbdev, OID_GEN_CURRENT_PACKET_FILTER, &filter,
+ sizeof(filter));
+
+ return retval;
+}
static const struct driver_info bcm4320b_info = {
.description = "Wireless RNDIS device, BCM4320b based",
- .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT |
+ FLAG_AVOID_UNLINK_URBS,
.bind = rndis_wlan_bind,
.unbind = rndis_wlan_unbind,
.status = rndis_status,
.rx_fixup = rndis_rx_fixup,
.tx_fixup = rndis_tx_fixup,
.reset = rndis_wlan_reset,
+ .stop = rndis_wlan_stop,
.early_init = bcm4320b_early_init,
- .link_change = rndis_wlan_link_change,
+ .indication = rndis_wlan_indication,
};
static const struct driver_info bcm4320a_info = {
.description = "Wireless RNDIS device, BCM4320a based",
- .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT |
+ FLAG_AVOID_UNLINK_URBS,
.bind = rndis_wlan_bind,
.unbind = rndis_wlan_unbind,
.status = rndis_status,
.rx_fixup = rndis_rx_fixup,
.tx_fixup = rndis_tx_fixup,
.reset = rndis_wlan_reset,
+ .stop = rndis_wlan_stop,
.early_init = bcm4320a_early_init,
- .link_change = rndis_wlan_link_change,
+ .indication = rndis_wlan_indication,
};
static const struct driver_info rndis_wlan_info = {
.description = "Wireless RNDIS device",
- .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT |
+ FLAG_AVOID_UNLINK_URBS,
.bind = rndis_wlan_bind,
.unbind = rndis_wlan_unbind,
.status = rndis_status,
.rx_fixup = rndis_rx_fixup,
.tx_fixup = rndis_tx_fixup,
.reset = rndis_wlan_reset,
+ .stop = rndis_wlan_stop,
.early_init = bcm4320a_early_init,
- .link_change = rndis_wlan_link_change,
+ .indication = rndis_wlan_indication,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 8aab3e6..ed1f997 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,8 +1,8 @@
menuconfig RT2X00
tristate "Ralink driver support"
- depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+ depends on MAC80211 && WLAN_80211
---help---
- This will enable the experimental support for the Ralink drivers,
+ This will enable the support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
These drivers make use of the mac80211 stack.
@@ -79,14 +79,14 @@
config RT2800USB
tristate "Ralink rt2800 (USB) support"
- depends on USB
+ depends on USB && EXPERIMENTAL
select RT2X00_LIB_USB
select RT2X00_LIB_HT
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
---help---
- This adds support for rt2800 wireless chipset family.
+ This adds experimental support for rt2800 wireless chipset family.
Supported chips: RT2770, RT2870 & RT3070.
When compiled as a module, this driver will be called "rt2800usb.ko".
@@ -112,14 +112,6 @@
config RT2X00_LIB_CRYPTO
boolean
-config RT2X00_LIB_RFKILL
- boolean
- default y if (RT2X00_LIB=y && INPUT=y) || (RT2X00_LIB=m && INPUT!=n)
- select INPUT_POLLDEV
-
-comment "rt2x00 rfkill support disabled due to modularized INPUT and built-in rt2x00"
- depends on RT2X00_LIB=y && INPUT=m
-
config RT2X00_LIB_LEDS
boolean
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index bfc7226..13043ea 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -5,7 +5,6 @@
rt2x00lib-y += rt2x00link.o
rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS) += rt2x00debug.o
rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
-rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o
rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 435f945..798f625 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -199,7 +199,6 @@
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -207,9 +206,6 @@
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
return rt2x00_get_field32(reg, GPIOCSR_BIT0);
}
-#else
-#define rt2400pci_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2400pci_brightness_set(struct led_classdev *led_cdev,
@@ -335,9 +331,8 @@
preamble_mask = erp->short_preamble << 3;
rt2x00pci_register_read(rt2x00dev, TXCSR1, ®);
- rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
- rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME,
- erp->ack_consume_time);
+ rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x1ff);
+ rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0x13a);
rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
@@ -1073,8 +1068,6 @@
* otherwise we might be sending out invalid data.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 0);
- rt2x00_set_field32(®, CSR14_TBCN, 0);
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
@@ -1391,10 +1384,8 @@
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
@@ -1567,12 +1558,14 @@
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2400pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2400pci_get_tsf,
.tx_last_beacon = rt2400pci_tx_last_beacon,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index ec3b004..ccd6441 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -928,7 +928,7 @@
#define RXD_W7_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to mac80211 value
+ * Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
* NOTE: Logics in rt2400pci for txpower are reversed
* compared to the other rt2x00 drivers. A higher txpower
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 08b30d0..2e872ac 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -199,7 +199,6 @@
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -207,9 +206,6 @@
rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®);
return rt2x00_get_field32(reg, GPIOCSR_BIT0);
}
-#else
-#define rt2500pci_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
@@ -341,9 +337,8 @@
preamble_mask = erp->short_preamble << 3;
rt2x00pci_register_read(rt2x00dev, TXCSR1, ®);
- rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, erp->ack_timeout);
- rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME,
- erp->ack_consume_time);
+ rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x162);
+ rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0xa2);
rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1);
rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
@@ -1231,8 +1226,6 @@
* otherwise we might be sending out invalid data.
*/
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
- rt2x00_set_field32(®, CSR14_TSF_COUNT, 0);
- rt2x00_set_field32(®, CSR14_TBCN, 0);
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
@@ -1548,10 +1541,8 @@
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be enabled.
@@ -1866,12 +1857,14 @@
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2500pci_get_tsf,
.tx_last_beacon = rt2500pci_tx_last_beacon,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index ce2f065..54d3795 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1218,7 +1218,7 @@
#define RXD_W10_DROP FIELD32(0x00000001)
/*
- * Macro's for converting txpower from EEPROM to mac80211 value
+ * Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index ce75426..22dd6d9 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -277,7 +277,6 @@
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u16 reg;
@@ -285,9 +284,6 @@
rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®);
return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
}
-#else
-#define rt2500usb_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
@@ -492,10 +488,6 @@
{
u16 reg;
- rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®);
- rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
-
rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®);
rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE,
!!erp->short_preamble);
@@ -1242,8 +1234,6 @@
* otherwise we might be sending out invalid data.
*/
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
- rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0);
- rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0);
rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
@@ -1291,7 +1281,7 @@
static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue)
{
- u16 reg;
+ u16 reg, reg0;
if (queue != QID_BEACON) {
rt2x00usb_kick_tx_queue(rt2x00dev, queue);
@@ -1302,16 +1292,19 @@
if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
+ reg0 = reg;
rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1);
/*
* Beacon generation will fail initially.
- * To prevent this we need to register the TXRX_CSR19
- * register several times.
+ * To prevent this we need to change the TXRX_CSR19
+ * register several times (reg0 is the same as reg
+ * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
+ * and 1 in reg).
*/
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
}
}
@@ -1603,10 +1596,8 @@
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Check if the BBP tuning should be disabled.
@@ -1879,7 +1870,6 @@
*/
__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
if (!modparam_nohwcrypt) {
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
@@ -1902,11 +1892,13 @@
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 5bc46fe..b01edca 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -831,7 +831,7 @@
#define RXD_W3_EIV FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to mac80211 value
+ * Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 3756166..a084077 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -264,7 +264,6 @@
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -272,9 +271,6 @@
rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
}
-#else
-#define rt2800usb_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
@@ -522,7 +518,7 @@
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
!(filter_flags & FIF_CONTROL));
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
- !(filter_flags & FIF_CONTROL));
+ !(filter_flags & FIF_PSPOLL));
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1);
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0);
rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
@@ -584,8 +580,7 @@
u32 reg;
rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
- rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
- DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
@@ -1467,6 +1462,10 @@
/*
* ASIC will keep garbage value after boot, clear encryption keys.
*/
+ for (i = 0; i < 4; i++)
+ rt2x00usb_register_write(rt2x00dev,
+ SHARED_KEY_MODE_ENTRY(i), 0);
+
for (i = 0; i < 256; i++) {
u32 wcid[2] = { 0xffffffff, 0x00ffffff };
rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
@@ -1476,10 +1475,6 @@
rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
}
- for (i = 0; i < 16; i++)
- rt2x00usb_register_write(rt2x00dev,
- SHARED_KEY_MODE_ENTRY(i), 0);
-
/*
* Clear all beacons
* For the Beacon base registers we only need to clear
@@ -1524,7 +1519,7 @@
rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®);
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
- rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3);
+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9);
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
@@ -1914,7 +1909,7 @@
/*
* Before the radio can be enabled, the device first has
* to be woken up. After that it needs a bit of time
- * to be fully awake and the radio can be enabled.
+ * to be fully awake and then the radio can be enabled.
*/
rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
msleep(1);
@@ -1922,7 +1917,7 @@
break;
case STATE_RADIO_OFF:
/*
- * After the radio has been disablee, the device should
+ * After the radio has been disabled, the device should
* be put to sleep for powersaving.
*/
rt2800usb_disable_radio(rt2x00dev);
@@ -1999,11 +1994,11 @@
rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- txdesc->key_idx : 0xff);
+ (skbdesc->entry->entry_idx + 1) : 0xff);
rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
skb->len - txdesc->l2pad);
rt2x00_set_field32(&word, TXWI_W1_PACKETID,
- skbdesc->entry->entry_idx);
+ skbdesc->entry->queue->qid + 1);
rt2x00_desc_write(txwi, 1, word);
/*
@@ -2054,8 +2049,6 @@
* otherwise we might be sending out invalid data.
*/
rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
- rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
@@ -2169,8 +2162,10 @@
if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
- if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
+ if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) {
rxdesc->dev_flags |= RXDONE_L2PAD;
+ skbdesc->flags |= SKBDESC_L2_PADDED;
+ }
if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
rxdesc->flags |= RX_FLAG_SHORT_GI;
@@ -2224,10 +2219,8 @@
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- DECLARE_MAC_BUF(macbuf);
-
random_ether_addr(mac);
- EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
+ EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
@@ -2385,10 +2378,8 @@
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Store led settings, for correct led behaviour.
@@ -2632,10 +2623,16 @@
return retval;
/*
+ * This device has multiple filters for control frames
+ * and has a separate filter for PS Poll frames.
+ */
+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
+
+ /*
* This device requires firmware.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
@@ -2792,6 +2789,7 @@
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.get_tkip_seq = rt2800usb_get_tkip_seq,
@@ -2800,6 +2798,7 @@
.conf_tx = rt2800usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2800usb_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 61a8be6..4d9991c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -36,6 +36,9 @@
* RF2750 2.4G/5G 1T2R
* RF3020 2.4G 1T1R
* RF2020 2.4G B/G
+ * RF3021 2.4G 1T2R
+ * RF3022 2.4G 2T2R
+ * RF3052 2.4G 2T2R
*/
#define RF2820 0x0001
#define RF2850 0x0002
@@ -43,6 +46,9 @@
#define RF2750 0x0004
#define RF3020 0x0005
#define RF2020 0x0006
+#define RF3021 0x0007
+#define RF3022 0x0008
+#define RF3052 0x0009
/*
* RT2870 version
@@ -1300,8 +1306,8 @@
* PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
* MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
* MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
- * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
- * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
+ * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry
+ * SHARED_KEY_MODE_BASE: 4 bits * 32-entry
*/
#define MAC_WCID_BASE 0x1800
#define PAIRWISE_KEY_TABLE_BASE 0x4000
@@ -1921,7 +1927,7 @@
#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
/*
- * Macro's for converting txpower from EEPROM to mac80211 value
+ * Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_G_TXPOWER 0
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 49c9e2c..27bc6b7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -134,6 +134,17 @@
GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
/*
+ * Structure for average calculation
+ * The avg field contains the actual average value,
+ * but avg_weight is internally used during calculations
+ * to prevent rounding errors.
+ */
+struct avg_val {
+ int avg;
+ int avg_weight;
+};
+
+/*
* Chipset identification
* The chipset on the device is composed of a RT and RF chip.
* The chipset combination is important for determining device capabilities.
@@ -245,21 +256,18 @@
struct antenna_setup active;
/*
- * RSSI information for the different antenna's.
- * These statistics are used to determine when
- * to switch antenna when using software diversity.
- *
- * rssi[0] -> Antenna A RSSI
- * rssi[1] -> Antenna B RSSI
+ * RSSI history information for the antenna.
+ * Used to determine when to switch antenna
+ * when using software diversity.
*/
- int rssi_history[2];
+ int rssi_history;
/*
* Current RSSI average of the currently active antenna.
* Similar to the avg_rssi in the link_qual structure
* this value is updated by using the walking average.
*/
- int rssi_ant;
+ struct avg_val rssi_ant;
};
/*
@@ -288,7 +296,7 @@
/*
* Currently active average RSSI value
*/
- int avg_rssi;
+ struct avg_val avg_rssi;
/*
* Currently precalculated percentages of successful
@@ -326,6 +334,11 @@
u8 bssid[ETH_ALEN];
/*
+ * beacon->skb must be protected with the mutex.
+ */
+ struct mutex beacon_skb_mutex;
+
+ /*
* Entry in the beacon queue which belongs to
* this interface. Each interface has its own
* dedicated beacon entry.
@@ -337,8 +350,6 @@
*/
unsigned int delayed_flags;
#define DELAYED_UPDATE_BEACON 0x00000001
-#define DELAYED_CONFIG_ERP 0x00000002
-#define DELAYED_LED_ASSOC 0x00000004
/*
* Software sequence counter, this is only required
@@ -406,9 +417,6 @@
int short_preamble;
int cts_protection;
- int ack_timeout;
- int ack_consume_time;
-
u32 basic_rates;
int slot_time;
@@ -594,7 +602,6 @@
DEVICE_STATE_INITIALIZED,
DEVICE_STATE_STARTED,
DEVICE_STATE_ENABLED_RADIO,
- DEVICE_STATE_DISABLED_RADIO_HW,
/*
* Driver requirements
@@ -602,7 +609,6 @@
DRIVER_REQUIRE_FIRMWARE,
DRIVER_REQUIRE_BEACON_GUARD,
DRIVER_REQUIRE_ATIM_QUEUE,
- DRIVER_REQUIRE_SCHEDULED,
DRIVER_REQUIRE_DMA,
DRIVER_REQUIRE_COPY_IV,
DRIVER_REQUIRE_L2PAD,
@@ -612,6 +618,8 @@
*/
CONFIG_SUPPORT_HW_BUTTON,
CONFIG_SUPPORT_HW_CRYPTO,
+ DRIVER_SUPPORT_CONTROL_FILTERS,
+ DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
/*
* Driver configuration
@@ -634,7 +642,7 @@
* The structure stored in here depends on the
* system bus (PCI or USB).
* When accessing this variable, the rt2x00dev_{pci,usb}
- * macro's should be used for correct typecasting.
+ * macros should be used for correct typecasting.
*/
struct device *dev;
@@ -651,18 +659,6 @@
enum ieee80211_band curr_band;
/*
- * rfkill structure for RF state switching support.
- * This will only be compiled in when required.
- */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
- unsigned long rfkill_state;
-#define RFKILL_STATE_ALLOCATED 1
-#define RFKILL_STATE_REGISTERED 2
-#define RFKILL_STATE_BLOCKED 3
- struct input_polled_dev *rfkill_poll_dev;
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
-
- /*
* If enabled, the debugfs interface structures
* required for deregistration of debugfs.
*/
@@ -824,7 +820,6 @@
* due to RTNL locking requirements.
*/
struct work_struct intf_work;
- struct work_struct filter_work;
/*
* Data queue arrays for RX, TX and Beacon.
@@ -976,7 +971,9 @@
void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mc_list);
+ u64 multicast);
+int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+ bool set);
#ifdef CONFIG_RT2X00_LIB_CRYPTO
int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
@@ -994,6 +991,7 @@
u32 changes);
int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
+void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
/*
* Driver allocation handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 3e019a1..40a201e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -94,17 +94,6 @@
erp.difs = bss_conf->use_short_slot ? SHORT_DIFS : DIFS;
erp.eifs = bss_conf->use_short_slot ? SHORT_EIFS : EIFS;
- erp.ack_timeout = PLCP + erp.difs + GET_DURATION(ACK_SIZE, 10);
- erp.ack_consume_time = SIFS + PLCP + GET_DURATION(ACK_SIZE, 10);
-
- if (bss_conf->use_short_preamble) {
- erp.ack_timeout += SHORT_PREAMBLE;
- erp.ack_consume_time += SHORT_PREAMBLE;
- } else {
- erp.ack_timeout += PREAMBLE;
- erp.ack_consume_time += PREAMBLE;
- }
-
erp.basic_rates = bss_conf->basic_rates;
erp.beacon_int = bss_conf->beacon_int;
@@ -124,24 +113,34 @@
}
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
- struct antenna_setup *ant)
+ struct antenna_setup config)
{
+ struct link_ant *ant = &rt2x00dev->link.ant;
struct antenna_setup *def = &rt2x00dev->default_ant;
struct antenna_setup *active = &rt2x00dev->link.ant.active;
/*
* Failsafe: Make sure we are not sending the
* ANTENNA_SW_DIVERSITY state to the driver.
- * If that happes fallback to hardware default,
+ * If that happens, fallback to hardware defaults,
* or our own default.
+ * If diversity handling is active for a particular antenna,
+ * we shouldn't overwrite that antenna.
* The calls to rt2x00lib_config_antenna_check()
* might have caused that we restore back to the already
* active setting. If that has happened we can quit.
*/
- ant->rx = rt2x00lib_config_antenna_check(ant->rx, def->rx);
- ant->tx = rt2x00lib_config_antenna_check(ant->tx, def->tx);
+ if (!(ant->flags & ANTENNA_RX_DIVERSITY))
+ config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx);
+ else
+ config.rx = active->rx;
- if (ant->rx == active->rx && ant->tx == active->tx)
+ if (!(ant->flags & ANTENNA_TX_DIVERSITY))
+ config.tx = rt2x00lib_config_antenna_check(config.tx, def->tx);
+ else
+ config.tx = active->tx;
+
+ if (config.rx == active->rx && config.tx == active->tx)
return;
/*
@@ -156,11 +155,11 @@
* The latter is required since we need to recalibrate the
* noise-sensitivity ratio for the new setup.
*/
- rt2x00dev->ops->lib->config_ant(rt2x00dev, ant);
+ rt2x00dev->ops->lib->config_ant(rt2x00dev, &config);
rt2x00link_reset_tuner(rt2x00dev, true);
- memcpy(active, ant, sizeof(*ant));
+ memcpy(active, &config, sizeof(config));
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index bc4e81e..de36837d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -53,8 +53,7 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
- if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) ||
- !hw_key || entry->skb->do_not_encrypt)
+ if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || !hw_key)
return;
__set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);
@@ -82,8 +81,7 @@
struct ieee80211_key_conf *key = tx_info->control.hw_key;
unsigned int overhead = 0;
- if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) ||
- !key || skb->do_not_encrypt)
+ if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) || !key)
return overhead;
/*
@@ -131,7 +129,7 @@
/* Pull buffer to correct size */
skb_pull(skb, txdesc->iv_len);
- /* IV/EIV data has officially be stripped */
+ /* IV/EIV data has officially been stripped */
skbdesc->flags |= SKBDESC_IV_STRIPPED;
}
@@ -156,7 +154,7 @@
skbdesc->flags &= ~SKBDESC_IV_STRIPPED;
}
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
@@ -201,7 +199,7 @@
* move the header more then iv_len since we must
* make room for the payload move as well.
*/
- if (l2pad) {
+ if (rxdesc->dev_flags & RXDONE_L2PAD) {
skb_push(skb, iv_len - align);
skb_put(skb, icv_len);
@@ -232,7 +230,7 @@
* Move payload for alignment purposes. Note that
* this is only needed when no l2 padding is present.
*/
- if (!l2pad) {
+ if (!(rxdesc->dev_flags & RXDONE_L2PAD)) {
memmove(skb->data + transfer,
skb->data + transfer + align,
payload_len);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 57813e7..71761b3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -40,8 +40,7 @@
* Don't enable the radio twice.
* And check if the hardware button has been disabled.
*/
- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
- test_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags))
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return 0;
/*
@@ -119,20 +118,11 @@
rt2x00link_start_tuner(rt2x00dev);
}
-static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
-{
- struct rt2x00_dev *rt2x00dev =
- container_of(work, struct rt2x00_dev, filter_work);
-
- rt2x00dev->ops->lib->config_filter(rt2x00dev, rt2x00dev->packet_filter);
-}
-
static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = data;
struct rt2x00_intf *intf = vif_to_intf(vif);
- struct ieee80211_bss_conf conf;
int delayed_flags;
/*
@@ -142,7 +132,6 @@
*/
spin_lock(&intf->lock);
- memcpy(&conf, &vif->bss_conf, sizeof(conf));
delayed_flags = intf->delayed_flags;
intf->delayed_flags = 0;
@@ -159,12 +148,6 @@
if (delayed_flags & DELAYED_UPDATE_BEACON)
rt2x00queue_update_beacon(rt2x00dev, vif, true);
-
- if (delayed_flags & DELAYED_CONFIG_ERP)
- rt2x00lib_config_erp(rt2x00dev, intf, &conf);
-
- if (delayed_flags & DELAYED_LED_ASSOC)
- rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
}
static void rt2x00lib_intf_scheduled(struct work_struct *work)
@@ -187,7 +170,6 @@
static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
- struct rt2x00_dev *rt2x00dev = data;
struct rt2x00_intf *intf = vif_to_intf(vif);
if (vif->type != NL80211_IFTYPE_AP &&
@@ -196,12 +178,6 @@
vif->type != NL80211_IFTYPE_WDS)
return;
- /*
- * Clean up the beacon skb.
- */
- rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb);
- intf->beacon->skb = NULL;
-
spin_lock(&intf->lock);
intf->delayed_flags |= DELAYED_UPDATE_BEACON;
spin_unlock(&intf->lock);
@@ -216,7 +192,7 @@
rt2x00lib_beacondone_iter,
rt2x00dev);
- queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
+ ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
@@ -228,7 +204,9 @@
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
- u8 rate_idx, rate_flags;
+ u8 rate_idx, rate_flags, retry_rates;
+ unsigned int i;
+ bool success;
/*
* Unmap the skb.
@@ -239,7 +217,7 @@
* Remove L2 padding which was added during
*/
if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
- rt2x00queue_payload_align(entry->skb, true, header_length);
+ rt2x00queue_remove_l2pad(entry->skb, header_length);
/*
* If the IV/EIV data was stripped from the frame before it was
@@ -257,40 +235,54 @@
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
/*
+ * Determine if the frame has been successfully transmitted.
+ */
+ success =
+ test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+ test_bit(TXDONE_UNKNOWN, &txdesc->flags) ||
+ test_bit(TXDONE_FALLBACK, &txdesc->flags);
+
+ /*
* Update TX statistics.
*/
- rt2x00dev->link.qual.tx_success +=
- test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
- test_bit(TXDONE_UNKNOWN, &txdesc->flags);
- rt2x00dev->link.qual.tx_failed +=
- test_bit(TXDONE_FAILURE, &txdesc->flags);
+ rt2x00dev->link.qual.tx_success += success;
+ rt2x00dev->link.qual.tx_failed += !success;
rate_idx = skbdesc->tx_rate_idx;
rate_flags = skbdesc->tx_rate_flags;
+ retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
+ (txdesc->retry + 1) : 1;
/*
* Initialize TX status
*/
memset(&tx_info->status, 0, sizeof(tx_info->status));
tx_info->status.ack_signal = 0;
- tx_info->status.rates[0].idx = rate_idx;
- tx_info->status.rates[0].flags = rate_flags;
- tx_info->status.rates[0].count = txdesc->retry + 1;
- tx_info->status.rates[1].idx = -1; /* terminate */
+
+ /*
+ * Frame was send with retries, hardware tried
+ * different rates to send out the frame, at each
+ * retry it lowered the rate 1 step.
+ */
+ for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
+ tx_info->status.rates[i].idx = rate_idx - i;
+ tx_info->status.rates[i].flags = rate_flags;
+ tx_info->status.rates[i].count = 1;
+ }
+ if (i < (IEEE80211_TX_MAX_RATES - 1))
+ tx_info->status.rates[i].idx = -1; /* terminate */
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
- test_bit(TXDONE_UNKNOWN, &txdesc->flags))
+ if (success)
tx_info->flags |= IEEE80211_TX_STAT_ACK;
- else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
+ else
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
}
if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
- if (test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
- test_bit(TXDONE_UNKNOWN, &txdesc->flags))
+ if (success)
rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
- else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
+ else
rt2x00dev->low_level_stats.dot11RTSFailureCount++;
}
@@ -372,7 +364,6 @@
struct sk_buff *skb;
struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
unsigned int header_length;
- bool l2pad;
int rate_idx;
/*
* Allocate a new sk_buffer. If no new buffer available, drop the
@@ -401,7 +392,6 @@
* aligned on a 4 byte boundary.
*/
header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
- l2pad = !!(rxdesc.dev_flags & RXDONE_L2PAD);
/*
* Hardware might have stripped the IV/EIV/ICV data,
@@ -411,10 +401,12 @@
*/
if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
(rxdesc.flags & RX_FLAG_IV_STRIPPED))
- rt2x00crypto_rx_insert_iv(entry->skb, l2pad, header_length,
+ rt2x00crypto_rx_insert_iv(entry->skb, header_length,
&rxdesc);
+ else if (rxdesc.dev_flags & RXDONE_L2PAD)
+ rt2x00queue_remove_l2pad(entry->skb, header_length);
else
- rt2x00queue_payload_align(entry->skb, l2pad, header_length);
+ rt2x00queue_align_payload(entry->skb, header_length);
/*
* Check if the frame was received using HT. In that case,
@@ -449,7 +441,8 @@
* mac80211 will clean up the skb structure.
*/
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
- ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
+ memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
+ ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
/*
* Replace the skb with the freshly allocated one.
@@ -785,6 +778,13 @@
rt2x00dev->intf_sta_count = 0;
rt2x00dev->intf_associated = 0;
+ /* Enable the radio */
+ retval = rt2x00lib_enable_radio(rt2x00dev);
+ if (retval) {
+ rt2x00queue_uninitialize(rt2x00dev);
+ return retval;
+ }
+
set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
return 0;
@@ -847,7 +847,6 @@
* Initialize configuration work.
*/
INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
- INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
/*
* Allocate queue array.
@@ -870,7 +869,6 @@
*/
rt2x00link_register(rt2x00dev);
rt2x00leds_register(rt2x00dev);
- rt2x00rfkill_allocate(rt2x00dev);
rt2x00debug_register(rt2x00dev);
set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
@@ -894,6 +892,11 @@
rt2x00lib_disable_radio(rt2x00dev);
/*
+ * Stop all work.
+ */
+ cancel_work_sync(&rt2x00dev->intf_work);
+
+ /*
* Uninitialize device.
*/
rt2x00lib_uninitialize(rt2x00dev);
@@ -902,7 +905,6 @@
* Free extra components
*/
rt2x00debug_deregister(rt2x00dev);
- rt2x00rfkill_free(rt2x00dev);
rt2x00leds_unregister(rt2x00dev);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 0bf2715..5462cb5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -30,10 +30,8 @@
/*
* Interval defines
- * Both the link tuner as the rfkill will be called once per second.
*/
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
-#define RFKILL_POLL_INTERVAL 1000
/*
* rt2x00_rate: Per rate device information
@@ -90,7 +88,7 @@
struct rt2x00_intf *intf,
struct ieee80211_bss_conf *conf);
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
- struct antenna_setup *ant);
+ struct antenna_setup ant);
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
const unsigned int changed_flags);
@@ -122,21 +120,42 @@
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
- * rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary
+ * rt2x00queue_align_frame - Align 802.11 frame to 4-byte boundary
* @skb: The skb to align
- * @l2pad: Should L2 padding be used
+ *
+ * Align the start of the 802.11 frame to a 4-byte boundary, this could
+ * mean the payload is not aligned properly though.
+ */
+void rt2x00queue_align_frame(struct sk_buff *skb);
+
+/**
+ * rt2x00queue_align_payload - Align 802.11 payload to 4-byte boundary
+ * @skb: The skb to align
* @header_length: Length of 802.11 header
*
- * This function prepares the @skb to be send to the device or mac80211.
- * If @l2pad is set to true padding will occur between the 802.11 header
- * and payload. Otherwise the padding will be done in front of the 802.11
- * header.
- * When @l2pad is set the function will check for the &SKBDESC_L2_PADDED
- * flag in &skb_frame_desc. If that flag is set, the padding is removed
- * and the flag cleared. Otherwise the padding is added and the flag is set.
+ * Align the 802.11 payload to a 4-byte boundary, this could
+ * mean the header is not aligned properly though.
*/
-void rt2x00queue_payload_align(struct sk_buff *skb,
- bool l2pad, unsigned int header_length);
+void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length);
+
+/**
+ * rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary
+ * @skb: The skb to align
+ * @header_length: Length of 802.11 header
+ *
+ * Apply L2 padding to align both header and payload to 4-byte boundary
+ */
+void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length);
+
+/**
+ * rt2x00queue_insert_l2pad - Remove L2 padding from 802.11 frame
+ * @skb: The skb to align
+ * @header_length: Length of 802.11 header
+ *
+ * Remove L2 padding used to align both header and payload to 4-byte boundary,
+ * by removing the L2 padding the header will no longer be 4-byte aligned.
+ */
+void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length);
/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
@@ -326,7 +345,7 @@
void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
struct txentry_desc *txdesc);
void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc);
#else
@@ -386,29 +405,18 @@
/*
* RFkill handlers.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
-void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev);
-#else
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
+ if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
}
static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
+ if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
}
-static inline void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
-{
-}
-
-static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
-{
-}
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
-
/*
* LED handlers
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index eb9b981..c64db0b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -46,7 +46,15 @@
#define DEFAULT_PERCENTAGE 50
/*
- * Small helper macro to work with moving/walking averages.
+ * Small helper macro for percentage calculation
+ * This is a very simple macro with the only catch that it will
+ * produce a default value in case no total value was provided.
+ */
+#define PERCENTAGE(__value, __total) \
+ ( (__total) ? (((__value) * 100) / (__total)) : (DEFAULT_PERCENTAGE) )
+
+/*
+ * Helper struct and macro to work with moving/walking averages.
* When adding a value to the average value the following calculation
* is needed:
*
@@ -60,18 +68,28 @@
* for a few minutes but when the device is moved away from the AP
* the average will not decrease fast enough to compensate.
* The walking average compensates this and will move towards
- * the new values correctly allowing a effective link tuning.
+ * the new values correctly allowing a effective link tuning,
+ * the speed of the average moving towards other values depends
+ * on the value for the number of samples. The higher the number
+ * of samples, the slower the average will move.
+ * We use two variables to keep track of the average value to
+ * compensate for the rounding errors. This can be a significant
+ * error (>5dBm) if the factor is too low.
*/
-#define MOVING_AVERAGE(__avg, __val, __samples) \
- ( (((__avg) * ((__samples) - 1)) + (__val)) / (__samples) )
-
-/*
- * Small helper macro for percentage calculation
- * This is a very simple macro with the only catch that it will
- * produce a default value in case no total value was provided.
- */
-#define PERCENTAGE(__value, __total) \
- ( (__total) ? (((__value) * 100) / (__total)) : (DEFAULT_PERCENTAGE) )
+#define AVG_SAMPLES 8
+#define AVG_FACTOR 1000
+#define MOVING_AVERAGE(__avg, __val) \
+({ \
+ struct avg_val __new; \
+ __new.avg_weight = \
+ (__avg).avg_weight ? \
+ ((((__avg).avg_weight * ((AVG_SAMPLES) - 1)) + \
+ ((__val) * (AVG_FACTOR))) / \
+ (AVG_SAMPLES) ) : \
+ ((__val) * (AVG_FACTOR)); \
+ __new.avg = __new.avg_weight / (AVG_FACTOR); \
+ __new; \
+})
/*
* For calculating the Signal quality we have determined
@@ -98,56 +116,41 @@
{
struct link_ant *ant = &rt2x00dev->link.ant;
- if (ant->rssi_ant && rt2x00dev->link.qual.rx_success)
- return ant->rssi_ant;
+ if (ant->rssi_ant.avg && rt2x00dev->link.qual.rx_success)
+ return ant->rssi_ant.avg;
return DEFAULT_RSSI;
}
-static int rt2x00link_antenna_get_rssi_history(struct rt2x00_dev *rt2x00dev,
- enum antenna antenna)
+static int rt2x00link_antenna_get_rssi_history(struct rt2x00_dev *rt2x00dev)
{
struct link_ant *ant = &rt2x00dev->link.ant;
- if (ant->rssi_history[antenna - ANTENNA_A])
- return ant->rssi_history[antenna - ANTENNA_A];
+ if (ant->rssi_history)
+ return ant->rssi_history;
return DEFAULT_RSSI;
}
-/* Small wrapper for rt2x00link_antenna_get_rssi_history() */
-#define rt2x00link_antenna_get_rssi_rx_history(__dev) \
- rt2x00link_antenna_get_rssi_history((__dev), \
- (__dev)->link.ant.active.rx)
-#define rt2x00link_antenna_get_rssi_tx_history(__dev) \
- rt2x00link_antenna_get_rssi_history((__dev), \
- (__dev)->link.ant.active.tx)
static void rt2x00link_antenna_update_rssi_history(struct rt2x00_dev *rt2x00dev,
- enum antenna antenna,
int rssi)
{
struct link_ant *ant = &rt2x00dev->link.ant;
- ant->rssi_history[ant->active.rx - ANTENNA_A] = rssi;
+ ant->rssi_history = rssi;
}
-/* Small wrapper for rt2x00link_antenna_get_rssi_history() */
-#define rt2x00link_antenna_update_rssi_rx_history(__dev, __rssi) \
- rt2x00link_antenna_update_rssi_history((__dev), \
- (__dev)->link.ant.active.rx, \
- (__rssi))
-#define rt2x00link_antenna_update_rssi_tx_history(__dev, __rssi) \
- rt2x00link_antenna_update_rssi_history((__dev), \
- (__dev)->link.ant.active.tx, \
- (__rssi))
static void rt2x00link_antenna_reset(struct rt2x00_dev *rt2x00dev)
{
- rt2x00dev->link.ant.rssi_ant = 0;
+ rt2x00dev->link.ant.rssi_ant.avg = 0;
+ rt2x00dev->link.ant.rssi_ant.avg_weight = 0;
}
static void rt2x00lib_antenna_diversity_sample(struct rt2x00_dev *rt2x00dev)
{
struct link_ant *ant = &rt2x00dev->link.ant;
struct antenna_setup new_ant;
- int sample_a = rt2x00link_antenna_get_rssi_history(rt2x00dev, ANTENNA_A);
- int sample_b = rt2x00link_antenna_get_rssi_history(rt2x00dev, ANTENNA_B);
+ int other_antenna;
+
+ int sample_current = rt2x00link_antenna_get_link_rssi(rt2x00dev);
+ int sample_other = rt2x00link_antenna_get_rssi_history(rt2x00dev);
memcpy(&new_ant, &ant->active, sizeof(new_ant));
@@ -158,22 +161,27 @@
/*
* During the last period we have sampled the RSSI
- * from both antenna's. It now is time to determine
+ * from both antennas. It now is time to determine
* which antenna demonstrated the best performance.
* When we are already on the antenna with the best
- * performance, then there really is nothing for us
- * left to do.
+ * performance, just create a good starting point
+ * for the history and we are done.
*/
- if (sample_a == sample_b)
+ if (sample_current >= sample_other) {
+ rt2x00link_antenna_update_rssi_history(rt2x00dev,
+ sample_current);
return;
+ }
+
+ other_antenna = (ant->active.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
if (ant->flags & ANTENNA_RX_DIVERSITY)
- new_ant.rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
+ new_ant.rx = other_antenna;
if (ant->flags & ANTENNA_TX_DIVERSITY)
- new_ant.tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
+ new_ant.tx = other_antenna;
- rt2x00lib_config_antenna(rt2x00dev, &new_ant);
+ rt2x00lib_config_antenna(rt2x00dev, new_ant);
}
static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev)
@@ -190,8 +198,8 @@
* after that update the history with the current value.
*/
rssi_curr = rt2x00link_antenna_get_link_rssi(rt2x00dev);
- rssi_old = rt2x00link_antenna_get_rssi_rx_history(rt2x00dev);
- rt2x00link_antenna_update_rssi_rx_history(rt2x00dev, rssi_curr);
+ rssi_old = rt2x00link_antenna_get_rssi_history(rt2x00dev);
+ rt2x00link_antenna_update_rssi_history(rt2x00dev, rssi_curr);
/*
* Legacy driver indicates that we should swap antenna's
@@ -213,12 +221,13 @@
if (ant->flags & ANTENNA_TX_DIVERSITY)
new_ant.tx = (new_ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
- rt2x00lib_config_antenna(rt2x00dev, &new_ant);
+ rt2x00lib_config_antenna(rt2x00dev, new_ant);
}
-static void rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev)
+static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev)
{
struct link_ant *ant = &rt2x00dev->link.ant;
+ unsigned int flags = ant->flags;
/*
* Determine if software diversity is enabled for
@@ -226,30 +235,38 @@
* Always perform this check since within the link
* tuner interval the configuration might have changed.
*/
- ant->flags &= ~ANTENNA_RX_DIVERSITY;
- ant->flags &= ~ANTENNA_TX_DIVERSITY;
+ flags &= ~ANTENNA_RX_DIVERSITY;
+ flags &= ~ANTENNA_TX_DIVERSITY;
if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
- ant->flags |= ANTENNA_RX_DIVERSITY;
+ flags |= ANTENNA_RX_DIVERSITY;
if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
- ant->flags |= ANTENNA_TX_DIVERSITY;
+ flags |= ANTENNA_TX_DIVERSITY;
if (!(ant->flags & ANTENNA_RX_DIVERSITY) &&
!(ant->flags & ANTENNA_TX_DIVERSITY)) {
ant->flags = 0;
- return;
+ return true;
}
+ /* Update flags */
+ ant->flags = flags;
+
/*
* If we have only sampled the data over the last period
* we should now harvest the data. Otherwise just evaluate
* the data. The latter should only be performed once
* every 2 seconds.
*/
- if (ant->flags & ANTENNA_MODE_SAMPLE)
+ if (ant->flags & ANTENNA_MODE_SAMPLE) {
rt2x00lib_antenna_diversity_sample(rt2x00dev);
- else if (rt2x00dev->link.count & 1)
+ return true;
+ } else if (rt2x00dev->link.count & 1) {
rt2x00lib_antenna_diversity_eval(rt2x00dev);
+ return true;
+ }
+
+ return false;
}
void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev,
@@ -260,8 +277,6 @@
struct link_qual *qual = &rt2x00dev->link.qual;
struct link_ant *ant = &rt2x00dev->link.ant;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- int avg_rssi = rxdesc->rssi;
- int ant_rssi = rxdesc->rssi;
/*
* Frame was received successfully since non-succesfull
@@ -281,16 +296,12 @@
/*
* Update global RSSI
*/
- if (link->avg_rssi)
- avg_rssi = MOVING_AVERAGE(link->avg_rssi, rxdesc->rssi, 8);
- link->avg_rssi = avg_rssi;
+ link->avg_rssi = MOVING_AVERAGE(link->avg_rssi, rxdesc->rssi);
/*
* Update antenna RSSI
*/
- if (ant->rssi_ant)
- ant_rssi = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi, 8);
- ant->rssi_ant = ant_rssi;
+ ant->rssi_ant = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi);
}
static void rt2x00link_precalculate_signal(struct rt2x00_dev *rt2x00dev)
@@ -351,8 +362,8 @@
rt2x00link_reset_tuner(rt2x00dev, false);
- queue_delayed_work(rt2x00dev->hw->workqueue,
- &link->work, LINK_TUNE_INTERVAL);
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->work, LINK_TUNE_INTERVAL);
}
void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
@@ -423,10 +434,10 @@
* collect the RSSI data we could use this. Otherwise we
* must fallback to the default RSSI value.
*/
- if (!link->avg_rssi || !qual->rx_success)
+ if (!link->avg_rssi.avg || !qual->rx_success)
qual->rssi = DEFAULT_RSSI;
else
- qual->rssi = link->avg_rssi;
+ qual->rssi = link->avg_rssi.avg;
/*
* Only perform the link tuning when Link tuning
@@ -444,25 +455,22 @@
/*
* Send a signal to the led to update the led signal strength.
*/
- rt2x00leds_led_quality(rt2x00dev, link->avg_rssi);
+ rt2x00leds_led_quality(rt2x00dev, qual->rssi);
/*
- * Evaluate antenna setup, make this the last step since this could
- * possibly reset some statistics.
+ * Evaluate antenna setup, make this the last step when
+ * rt2x00lib_antenna_diversity made changes the quality
+ * statistics will be reset.
*/
- rt2x00lib_antenna_diversity(rt2x00dev);
-
- /*
- * Reset the quality counters which recounted during each period.
- */
- rt2x00link_reset_qual(rt2x00dev);
+ if (rt2x00lib_antenna_diversity(rt2x00dev))
+ rt2x00link_reset_qual(rt2x00dev);
/*
* Increase tuner counter, and reschedule the next link tuner run.
*/
link->count++;
- queue_delayed_work(rt2x00dev->hw->workqueue,
- &link->work, LINK_TUNE_INTERVAL);
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->work, LINK_TUNE_INTERVAL);
}
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c4c06b4..929b85f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -73,7 +73,8 @@
else
rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
- skb->do_not_encrypt = 1;
+ /* Disable hardware encryption */
+ rts_info->control.hw_key = NULL;
/*
* RTS/CTS frame should use the length of the frame plus any
@@ -273,6 +274,7 @@
spin_lock_init(&intf->lock);
spin_lock_init(&intf->seqlock);
+ mutex_init(&intf->beacon_skb_mutex);
intf->beacon = entry;
if (conf->type == NL80211_IFTYPE_AP)
@@ -337,54 +339,38 @@
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
- int status;
/*
- * Mac80211 might be calling this function while we are trying
+ * mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
/*
- * Only change device state when the radio is enabled. It does not
- * matter what parameters we have configured when the radio is disabled
- * because we won't be able to send or receive anyway. Also note that
- * some configuration parameters (e.g. channel and antenna values) can
- * only be set when the radio is enabled.
+ * Some configuration parameters (e.g. channel and antenna values) can
+ * only be set when the radio is enabled, but do require the RX to
+ * be off.
*/
- if (conf->radio_enabled) {
- /* For programming the values, we have to turn RX off */
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
- /* Enable the radio */
- status = rt2x00lib_enable_radio(rt2x00dev);
- if (unlikely(status))
- return status;
+ /*
+ * When we've just turned on the radio, we want to reprogram
+ * everything to ensure a consistent state
+ */
+ rt2x00lib_config(rt2x00dev, conf, changed);
- /*
- * When we've just turned on the radio, we want to reprogram
- * everything to ensure a consistent state
- */
- rt2x00lib_config(rt2x00dev, conf, changed);
+ /*
+ * After the radio has been enabled we need to configure
+ * the antenna to the default settings. rt2x00lib_config_antenna()
+ * should determine if any action should be taken based on
+ * checking if diversity has been enabled or no antenna changes
+ * have been made since the last configuration change.
+ */
+ rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
- /*
- * The radio was enabled, configure the antenna to the
- * default settings, the link tuner will later start
- * continue configuring the antenna based on the software
- * diversity. But for non-diversity configurations, we need
- * to have configured the correct state now.
- */
- if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED)
- rt2x00lib_config_antenna(rt2x00dev,
- &rt2x00dev->default_ant);
-
- /* Turn RX back on */
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
- } else {
- /* Disable the radio */
- rt2x00lib_disable_radio(rt2x00dev);
- }
+ /* Turn RX back on */
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
return 0;
}
@@ -393,7 +379,7 @@
void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mc_list)
+ u64 multicast)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -406,6 +392,7 @@
FIF_FCSFAIL |
FIF_PLCPFAIL |
FIF_CONTROL |
+ FIF_PSPOLL |
FIF_OTHER_BSS |
FIF_PROMISC_IN_BSS;
@@ -421,19 +408,42 @@
*total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
/*
+ * If the device has a single filter for all control frames,
+ * FIF_CONTROL and FIF_PSPOLL flags imply each other.
+ * And if the device has more than one filter for control frames
+ * of different types, but has no a separate filter for PS Poll frames,
+ * FIF_CONTROL flag implies FIF_PSPOLL.
+ */
+ if (!test_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags)) {
+ if (*total_flags & FIF_CONTROL || *total_flags & FIF_PSPOLL)
+ *total_flags |= FIF_CONTROL | FIF_PSPOLL;
+ }
+ if (!test_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags)) {
+ if (*total_flags & FIF_CONTROL)
+ *total_flags |= FIF_PSPOLL;
+ }
+
+ /*
* Check if there is any work left for us.
*/
if (rt2x00dev->packet_filter == *total_flags)
return;
rt2x00dev->packet_filter = *total_flags;
- if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
- rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
- else
- queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
+ rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
}
EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
+int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+ bool set)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+
+ rt2x00lib_beacondone(rt2x00dev);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_tim);
+
#ifdef CONFIG_RT2X00_LIB_CRYPTO
static void memcpy_tkip(struct rt2x00lib_crypto *crypto, u8 *key, u8 key_len)
{
@@ -572,11 +582,10 @@
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct rt2x00_intf *intf = vif_to_intf(vif);
- unsigned int delayed = 0;
int update_bssid = 0;
/*
- * Mac80211 might be calling this function while we are trying
+ * mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
@@ -626,30 +635,15 @@
else
rt2x00dev->intf_associated--;
- if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
- rt2x00leds_led_assoc(rt2x00dev,
- !!rt2x00dev->intf_associated);
- else
- delayed |= DELAYED_LED_ASSOC;
+ rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
}
/*
* When the erp information has changed, we should perform
* additional configuration steps. For all other changes we are done.
*/
- if (changes & ~(BSS_CHANGED_ASSOC | BSS_CHANGED_HT)) {
- if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
- rt2x00lib_config_erp(rt2x00dev, intf, bss_conf);
- else
- delayed |= DELAYED_CONFIG_ERP;
- }
-
- spin_lock(&intf->lock);
- if (delayed) {
- intf->delayed_flags |= delayed;
- schedule_work(&rt2x00dev->intf_work);
- }
- spin_unlock(&intf->lock);
+ if (changes & ~(BSS_CHANGED_ASSOC | BSS_CHANGED_HT))
+ rt2x00lib_config_erp(rt2x00dev, intf, bss_conf);
}
EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed);
@@ -687,3 +681,12 @@
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx);
+
+void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ bool active = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
+
+ wiphy_rfkill_set_hw_state(hw->wiphy, !active);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_rfkill_poll);
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 44e5b32..577029e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -148,35 +148,89 @@
dev_kfree_skb_any(skb);
}
-void rt2x00queue_payload_align(struct sk_buff *skb,
- bool l2pad, unsigned int header_length)
+void rt2x00queue_align_frame(struct sk_buff *skb)
{
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
unsigned int frame_length = skb->len;
- unsigned int align = ALIGN_SIZE(skb, header_length);
+ unsigned int align = ALIGN_SIZE(skb, 0);
if (!align)
return;
- if (l2pad) {
- if (skbdesc->flags & SKBDESC_L2_PADDED) {
- /* Remove L2 padding */
- memmove(skb->data + align, skb->data, header_length);
- skb_pull(skb, align);
- skbdesc->flags &= ~SKBDESC_L2_PADDED;
- } else {
- /* Add L2 padding */
- skb_push(skb, align);
- memmove(skb->data, skb->data + align, header_length);
- skbdesc->flags |= SKBDESC_L2_PADDED;
- }
+ skb_push(skb, align);
+ memmove(skb->data, skb->data + align, frame_length);
+ skb_trim(skb, frame_length);
+}
+
+void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_lengt)
+{
+ unsigned int frame_length = skb->len;
+ unsigned int align = ALIGN_SIZE(skb, header_lengt);
+
+ if (!align)
+ return;
+
+ skb_push(skb, align);
+ memmove(skb->data, skb->data + align, frame_length);
+ skb_trim(skb, frame_length);
+}
+
+void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int frame_length = skb->len;
+ unsigned int header_align = ALIGN_SIZE(skb, 0);
+ unsigned int payload_align = ALIGN_SIZE(skb, header_length);
+ unsigned int l2pad = 4 - (payload_align - header_align);
+
+ if (header_align == payload_align) {
+ /*
+ * Both header and payload must be moved the same
+ * amount of bytes to align them properly. This means
+ * we don't use the L2 padding but just move the entire
+ * frame.
+ */
+ rt2x00queue_align_frame(skb);
+ } else if (!payload_align) {
+ /*
+ * Simple L2 padding, only the header needs to be moved,
+ * the payload is already properly aligned.
+ */
+ skb_push(skb, header_align);
+ memmove(skb->data, skb->data + header_align, frame_length);
+ skbdesc->flags |= SKBDESC_L2_PADDED;
} else {
- /* Generic payload alignment to 4-byte boundary */
- skb_push(skb, align);
- memmove(skb->data, skb->data + align, frame_length);
+ /*
+ *
+ * Complicated L2 padding, both header and payload need
+ * to be moved. By default we only move to the start
+ * of the buffer, so our header alignment needs to be
+ * increased if there is not enough room for the header
+ * to be moved.
+ */
+ if (payload_align > header_align)
+ header_align += 4;
+
+ skb_push(skb, header_align);
+ memmove(skb->data, skb->data + header_align, header_length);
+ memmove(skb->data + header_length + l2pad,
+ skb->data + header_length + l2pad + header_align,
+ frame_length - header_length);
+ skbdesc->flags |= SKBDESC_L2_PADDED;
}
}
+void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int l2pad = 4 - (header_length & 3);
+
+ if (!l2pad || (skbdesc->flags & SKBDESC_L2_PADDED))
+ return;
+
+ memmove(skb->data + l2pad, skb->data, header_length);
+ skb_pull(skb, l2pad);
+}
+
static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
@@ -324,7 +378,8 @@
/*
* Check if more fragments are pending
*/
- if (ieee80211_has_morefrags(hdr->frame_control)) {
+ if (ieee80211_has_morefrags(hdr->frame_control) ||
+ (tx_info->flags & IEEE80211_TX_CTL_MORE_FRAMES)) {
__set_bit(ENTRY_TXD_BURST, &txdesc->flags);
__set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags);
}
@@ -452,9 +507,18 @@
rt2x00crypto_tx_remove_iv(skb, &txdesc);
}
+ /*
+ * When DMA allocation is required we should guarentee to the
+ * driver that the DMA is aligned to a 4-byte boundary.
+ * However some drivers require L2 padding to pad the payload
+ * rather then the header. This could be a requirement for
+ * PCI and USB devices, while header alignment only is valid
+ * for PCI devices.
+ */
if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags))
- rt2x00queue_payload_align(entry->skb, true,
- txdesc.header_length);
+ rt2x00queue_insert_l2pad(entry->skb, txdesc.header_length);
+ else if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
+ rt2x00queue_align_frame(entry->skb);
/*
* It could be possible that the queue was corrupted and this
@@ -490,14 +554,25 @@
if (unlikely(!intf->beacon))
return -ENOBUFS;
+ mutex_lock(&intf->beacon_skb_mutex);
+
+ /*
+ * Clean up the beacon skb.
+ */
+ rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb);
+ intf->beacon->skb = NULL;
+
if (!enable_beacon) {
rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_BEACON);
+ mutex_unlock(&intf->beacon_skb_mutex);
return 0;
}
intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
- if (!intf->beacon->skb)
+ if (!intf->beacon->skb) {
+ mutex_unlock(&intf->beacon_skb_mutex);
return -ENOMEM;
+ }
/*
* Copy all TX descriptor information into txdesc,
@@ -535,6 +610,8 @@
rt2x00dev->ops->lib->write_beacon(intf->beacon);
rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
+ mutex_unlock(&intf->beacon_skb_mutex);
+
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index b5e0634..a5591fb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -29,7 +29,7 @@
#include <linux/prefetch.h>
/**
- * DOC: Entrie frame size
+ * DOC: Entry frame size
*
* Ralink PCI devices demand the Frame size to be a multiple of 128 bytes,
* for USB devices this restriction does not apply, but the value of
@@ -45,13 +45,13 @@
/**
* DOC: Number of entries per queue
*
- * Under normal load without fragmentation 12 entries are sufficient
+ * Under normal load without fragmentation, 12 entries are sufficient
* without the queue being filled up to the maximum. When using fragmentation
- * and the queue threshold code we need to add some additional margins to
+ * and the queue threshold code, we need to add some additional margins to
* make sure the queue will never (or only under extreme load) fill up
* completely.
- * Since we don't use preallocated DMA having a large number of queue entries
- * will have only minimal impact on the memory requirements for the queue.
+ * Since we don't use preallocated DMA, having a large number of queue entries
+ * will have minimal impact on the memory requirements for the queue.
*/
#define RX_ENTRIES 24
#define TX_ENTRIES 24
@@ -214,6 +214,7 @@
*
* @TXDONE_UNKNOWN: Hardware could not determine success of transmission.
* @TXDONE_SUCCESS: Frame was successfully send
+ * @TXDONE_FALLBACK: Frame was successfully send using a fallback rate.
* @TXDONE_FAILURE: Frame was not successfully send
* @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the
* frame transmission failed due to excessive retries.
@@ -221,6 +222,7 @@
enum txdone_entry_desc_flags {
TXDONE_UNKNOWN,
TXDONE_SUCCESS,
+ TXDONE_FALLBACK,
TXDONE_FAILURE,
TXDONE_EXCESSIVE_RETRY,
};
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 861322d..983e52e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -176,8 +176,8 @@
#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x))
/*
- * Macro's to find first set bit in a variable.
- * These macro's behaves the same as the __ffs() function with
+ * Macros to find first set bit in a variable.
+ * These macros behave the same as the __ffs() functions but
* the most important difference that this is done during
* compile-time rather then run-time.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
deleted file mode 100644
index b6d4c67..0000000
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
- <http://rt2x00.serialmonkey.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the
- Free Software Foundation, Inc.,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- Module: rt2x00rfkill
- Abstract: rt2x00 rfkill routines.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "rt2x00.h"
-#include "rt2x00lib.h"
-
-static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev)
-{
- struct rt2x00_dev *rt2x00dev = poll_dev->private;
- int state, old_state;
-
- if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state) ||
- !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
- return;
-
- /*
- * Poll latest state, if the state is different then the previous state,
- * we should generate an input event.
- */
- state = !!rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
- old_state = !!test_bit(RFKILL_STATE_BLOCKED, &rt2x00dev->rfkill_state);
-
- if (old_state != state) {
- input_report_switch(poll_dev->input, SW_RFKILL_ALL, state);
- change_bit(RFKILL_STATE_BLOCKED, &rt2x00dev->rfkill_state);
- }
-}
-
-void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
- test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
- return;
-
- if (input_register_polled_device(rt2x00dev->rfkill_poll_dev)) {
- ERROR(rt2x00dev, "Failed to register polled device.\n");
- return;
- }
-
- __set_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state);
-
- /*
- * Force initial poll which will detect the initial device state,
- * and correctly sends the signal to the input layer about this
- * state.
- */
- rt2x00rfkill_poll(rt2x00dev->rfkill_poll_dev);
-}
-
-void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
- !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
- return;
-
- input_unregister_polled_device(rt2x00dev->rfkill_poll_dev);
-
- __clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state);
-}
-
-void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
-{
- struct input_polled_dev *poll_dev;
-
- if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
- !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
- return;
-
- poll_dev = input_allocate_polled_device();
- if (!poll_dev) {
- ERROR(rt2x00dev, "Failed to allocate polled device.\n");
- return;
- }
-
- poll_dev->private = rt2x00dev;
- poll_dev->poll = rt2x00rfkill_poll;
- poll_dev->poll_interval = RFKILL_POLL_INTERVAL;
-
- poll_dev->input->name = rt2x00dev->ops->name;
- poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy);
- poll_dev->input->id.bustype = BUS_HOST;
- poll_dev->input->id.vendor = 0x1814;
- poll_dev->input->id.product = rt2x00dev->chip.rt;
- poll_dev->input->id.version = rt2x00dev->chip.rev;
- poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy);
- poll_dev->input->evbit[0] = BIT(EV_SW);
- poll_dev->input->swbit[0] = BIT(SW_RFKILL_ALL);
-
- rt2x00dev->rfkill_poll_dev = poll_dev;
-
- __set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state);
-}
-
-void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
-{
- if (!__test_and_clear_bit(RFKILL_STATE_ALLOCATED,
- &rt2x00dev->rfkill_state))
- return;
-
- input_free_polled_device(rt2x00dev->rfkill_poll_dev);
- rt2x00dev->rfkill_poll_dev = NULL;
-}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 49b29ff..b20e3ea 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -237,7 +237,6 @@
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -245,9 +244,6 @@
rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®);
return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
}
-#else
-#define rt61pci_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt61pci_brightness_set(struct led_classdev *led_cdev,
@@ -534,7 +530,7 @@
rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
- !(filter_flags & FIF_CONTROL));
+ !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
!(filter_flags & FIF_PROMISC_IN_BSS));
rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
@@ -602,7 +598,7 @@
u32 reg;
rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®);
- rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+ rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
@@ -1859,8 +1855,6 @@
* otherwise we might be sending out invalid data.
*/
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
@@ -2316,7 +2310,7 @@
}
/*
- * Determine number of antenna's.
+ * Determine number of antennas.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
__set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
@@ -2338,10 +2332,8 @@
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Read frequency offset and RF programming sequence.
@@ -2607,6 +2599,11 @@
int retval;
/*
+ * Disable power saving.
+ */
+ rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007);
+
+ /*
* Allocate eeprom data.
*/
retval = rt61pci_validate_eeprom(rt2x00dev);
@@ -2625,6 +2622,12 @@
return retval;
/*
+ * This device has multiple filters for control frames,
+ * but has no a separate filter for PS Poll frames.
+ */
+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+
+ /*
* This device requires firmware and DMA mapped skbs.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
@@ -2722,12 +2725,14 @@
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt61pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt61pci_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 6c71f77..93eb699 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -1476,7 +1476,7 @@
#define RXD_W15_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to mac80211 value
+ * Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index c188488..1cbd9b4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -183,7 +183,6 @@
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-#ifdef CONFIG_RT2X00_LIB_RFKILL
static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -191,9 +190,6 @@
rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
}
-#else
-#define rt73usb_rfkill_poll NULL
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt73usb_brightness_set(struct led_classdev *led_cdev,
@@ -497,7 +493,7 @@
rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
- !(filter_flags & FIF_CONTROL));
+ !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
!(filter_flags & FIF_PROMISC_IN_BSS));
rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
@@ -565,7 +561,7 @@
u32 reg;
rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
- rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
+ rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
@@ -1531,8 +1527,6 @@
* otherwise we might be sending out invalid data.
*/
rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
- rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
- rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
@@ -1863,10 +1857,8 @@
/*
* Detect if this device has an hardware controlled radio.
*/
-#ifdef CONFIG_RT2X00_LIB_RFKILL
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
* Read frequency offset.
@@ -2150,10 +2142,15 @@
return retval;
/*
+ * This device has multiple filters for control frames,
+ * but has no a separate filter for PS Poll frames.
+ */
+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+
+ /*
* This device requires firmware.
*/
__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
@@ -2247,12 +2244,14 @@
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt73usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt73usb_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
};
static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index c8016f6..81fe0be 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -809,7 +809,7 @@
/*
* EEPROM antenna.
- * ANTENNA_NUM: Number of antenna's.
+ * ANTENNA_NUM: Number of antennas.
* TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
* RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
* FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
@@ -1058,7 +1058,7 @@
#define RXD_W5_RESERVED FIELD32(0xffffffff)
/*
- * Macro's for converting txpower from EEPROM to mac80211 value
+ * Macros for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile
index 37e3d4d..93cbfbe 100644
--- a/drivers/net/wireless/rtl818x/Makefile
+++ b/drivers/net/wireless/rtl818x/Makefile
@@ -1,5 +1,5 @@
rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
-rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o
+rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o rtl8187_rfkill.o
obj-$(CONFIG_RTL8180) += rtl8180.o
obj-$(CONFIG_RTL8187) += rtl8187.o
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 7e65d7c..16429c4 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -143,7 +143,8 @@
if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
- ieee80211_rx_irqsafe(dev, skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(dev, skb);
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
@@ -280,7 +281,7 @@
(ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
remainder = (16 * (skb->len + 4)) %
((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
- if (remainder > 0 && remainder <= 6)
+ if (remainder <= 6)
plcp_len |= 1 << 15;
}
@@ -727,10 +728,16 @@
priv->rf->conf_erp(dev, info);
}
+static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ return mc_count;
+}
+
static void rtl8180_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mclist)
+ u64 multicast)
{
struct rtl8180_priv *priv = dev->priv;
@@ -740,7 +747,7 @@
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
if (changed_flags & FIF_OTHER_BSS)
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
- if (*total_flags & FIF_ALLMULTI || mc_count > 0)
+ if (*total_flags & FIF_ALLMULTI || multicast > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
else
priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
@@ -767,6 +774,7 @@
.remove_interface = rtl8180_remove_interface,
.config = rtl8180_config,
.bss_info_changed = rtl8180_bss_info_changed,
+ .prepare_multicast = rtl8180_prepare_multicast,
.configure_filter = rtl8180_configure_filter,
};
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index c09bfef..bf9175a 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -133,6 +133,7 @@
__le16 bits16;
__le32 bits32;
} *io_dmabuf;
+ bool rfkill_off;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 294250e..2017ccc 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -32,6 +32,7 @@
#ifdef CONFIG_RTL8187_LEDS
#include "rtl8187_leds.h"
#endif
+#include "rtl8187_rfkill.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
@@ -220,7 +221,7 @@
* reading a register in the device. We are in interrupt mode
* here, thus queue the skb and finish on a work queue. */
skb_queue_tail(&priv->b_tx_status.queue, skb);
- queue_delayed_work(hw->workqueue, &priv->work, 0);
+ ieee80211_queue_delayed_work(hw, &priv->work, 0);
}
}
@@ -380,7 +381,8 @@
rx_status.flag |= RX_FLAG_TSFT;
if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
- ieee80211_rx_irqsafe(dev, skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(dev, skb);
skb = dev_alloc_skb(RTL8187_MAX_RX);
if (unlikely(!skb)) {
@@ -647,10 +649,10 @@
/* setup card */
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
- rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 1);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -673,11 +675,11 @@
/* host_usb_init */
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
@@ -869,6 +871,9 @@
priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
+ /* ENEDCA flag must always be set, transmit issues? */
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+
return 0;
}
@@ -906,12 +911,12 @@
u32 reg;
int ret;
+ mutex_lock(&priv->conf_mutex);
+
ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
rtl8187b_init_hw(dev);
if (ret)
- return ret;
-
- mutex_lock(&priv->conf_mutex);
+ goto rtl8187_start_exit;
init_usb_anchor(&priv->anchored);
priv->dev = dev;
@@ -938,8 +943,7 @@
(7 << 21 /* MAX TX DMA */));
rtl8187_init_urbs(dev);
rtl8187b_init_status_urb(dev);
- mutex_unlock(&priv->conf_mutex);
- return 0;
+ goto rtl8187_start_exit;
}
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
@@ -983,9 +987,10 @@
reg |= RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
INIT_DELAYED_WORK(&priv->work, rtl8187_work);
- mutex_unlock(&priv->conf_mutex);
- return 0;
+rtl8187_start_exit:
+ mutex_unlock(&priv->conf_mutex);
+ return ret;
}
static void rtl8187_stop(struct ieee80211_hw *dev)
@@ -1013,9 +1018,10 @@
dev_kfree_skb_any(skb);
usb_kill_anchored_urbs(&priv->anchored);
+ mutex_unlock(&priv->conf_mutex);
+
if (!priv->is_rtl8187b)
cancel_delayed_work_sync(&priv->work);
- mutex_unlock(&priv->conf_mutex);
}
static int rtl8187_add_interface(struct ieee80211_hw *dev,
@@ -1173,13 +1179,16 @@
rtl818x_iowrite8(priv, &priv->map->BSSID[i],
info->bssid[i]);
+ if (priv->is_rtl8187b)
+ reg = RTL818X_MSR_ENEDCA;
+ else
+ reg = 0;
+
if (is_valid_ether_addr(info->bssid)) {
- reg = RTL818X_MSR_INFRA;
- if (priv->is_rtl8187b)
- reg |= RTL818X_MSR_ENEDCA;
+ reg |= RTL818X_MSR_INFRA;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
} else {
- reg = RTL818X_MSR_NO_LINK;
+ reg |= RTL818X_MSR_NO_LINK;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
}
@@ -1191,10 +1200,16 @@
info->use_short_preamble);
}
+static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
+ int mc_count, struct dev_addr_list *mc_list)
+{
+ return mc_count;
+}
+
static void rtl8187_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mclist)
+ u64 multicast)
{
struct rtl8187_priv *priv = dev->priv;
@@ -1204,7 +1219,7 @@
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
if (changed_flags & FIF_OTHER_BSS)
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
- if (*total_flags & FIF_ALLMULTI || mc_count > 0)
+ if (*total_flags & FIF_ALLMULTI || multicast > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
else
priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
@@ -1267,8 +1282,10 @@
.remove_interface = rtl8187_remove_interface,
.config = rtl8187_config,
.bss_info_changed = rtl8187_bss_info_changed,
+ .prepare_multicast = rtl8187_prepare_multicast,
.configure_filter = rtl8187_configure_filter,
- .conf_tx = rtl8187_conf_tx
+ .conf_tx = rtl8187_conf_tx,
+ .rfkill_poll = rtl8187_rfkill_poll
};
static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
@@ -1508,6 +1525,7 @@
reg &= 0xFF;
rtl8187_leds_init(dev, reg);
#endif
+ rtl8187_rfkill_init(dev);
return 0;
@@ -1531,6 +1549,7 @@
#ifdef CONFIG_RTL8187_LEDS
rtl8187_leds_exit(dev);
#endif
+ rtl8187_rfkill_exit(dev);
ieee80211_unregister_hw(dev);
priv = dev->priv;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index cf9f899..a1c670f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -42,7 +42,7 @@
mutex_lock(&priv->conf_mutex);
switch (led->ledpin) {
case LED_PIN_GPIO0:
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
break;
case LED_PIN_LED0:
@@ -80,7 +80,7 @@
mutex_lock(&priv->conf_mutex);
switch (led->ledpin) {
case LED_PIN_GPIO0:
- rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
break;
case LED_PIN_LED0:
@@ -108,11 +108,11 @@
struct rtl8187_priv *priv = hw->priv;
if (brightness == LED_OFF) {
- queue_delayed_work(hw->workqueue, &priv->led_off, 0);
+ ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
/* The LED is off for 1/20 sec so that it just blinks. */
- queue_delayed_work(hw->workqueue, &priv->led_on, HZ / 20);
+ ieee80211_queue_delayed_work(hw, &priv->led_on, HZ / 20);
} else
- queue_delayed_work(hw->workqueue, &priv->led_on, 0);
+ ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
}
static int rtl8187_register_led(struct ieee80211_hw *dev,
@@ -193,7 +193,7 @@
err = rtl8187_register_led(dev, &priv->led_rx, name,
ieee80211_get_rx_led_name(dev), ledpin);
if (!err) {
- queue_delayed_work(dev->workqueue, &priv->led_on, 0);
+ ieee80211_queue_delayed_work(dev, &priv->led_on, 0);
return;
}
/* registration of RX LED failed - unregister TX */
@@ -209,7 +209,7 @@
struct rtl8187_priv *priv = dev->priv;
/* turn the LED off before exiting */
- queue_delayed_work(dev->workqueue, &priv->led_off, 0);
+ ieee80211_queue_delayed_work(dev, &priv->led_off, 0);
cancel_delayed_work_sync(&priv->led_off);
cancel_delayed_work_sync(&priv->led_on);
rtl8187_unregister_led(&priv->led_rx);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
new file mode 100644
index 0000000..9fab13e
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
@@ -0,0 +1,63 @@
+/*
+ * Linux RFKILL support for RTL8187
+ *
+ * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * Based on the RFKILL handling in the r8187 driver, which is:
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+
+static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
+{
+ u8 gpio;
+
+ gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~0x02);
+ gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
+
+ return gpio & 0x02;
+}
+
+void rtl8187_rfkill_init(struct ieee80211_hw *hw)
+{
+ struct rtl8187_priv *priv = hw->priv;
+
+ priv->rfkill_off = rtl8187_is_radio_enabled(priv);
+ printk(KERN_INFO "rtl8187: wireless switch is %s\n",
+ priv->rfkill_off ? "on" : "off");
+ wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off);
+ wiphy_rfkill_start_polling(hw->wiphy);
+}
+
+void rtl8187_rfkill_poll(struct ieee80211_hw *hw)
+{
+ bool enabled;
+ struct rtl8187_priv *priv = hw->priv;
+
+ mutex_lock(&priv->conf_mutex);
+ enabled = rtl8187_is_radio_enabled(priv);
+ if (unlikely(enabled != priv->rfkill_off)) {
+ priv->rfkill_off = enabled;
+ printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n",
+ enabled ? "on" : "off");
+ wiphy_rfkill_set_hw_state(hw->wiphy, !enabled);
+ }
+ mutex_unlock(&priv->conf_mutex);
+}
+
+void rtl8187_rfkill_exit(struct ieee80211_hw *hw)
+{
+ wiphy_rfkill_stop_polling(hw->wiphy);
+}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.h b/drivers/net/wireless/rtl818x/rtl8187_rfkill.h
new file mode 100644
index 0000000..e12575e
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.h
@@ -0,0 +1,8 @@
+#ifndef RTL8187_RFKILL_H
+#define RTL8187_RFKILL_H
+
+void rtl8187_rfkill_init(struct ieee80211_hw *hw);
+void rtl8187_rfkill_poll(struct ieee80211_hw *hw);
+void rtl8187_rfkill_exit(struct ieee80211_hw *hw);
+
+#endif /* RTL8187_RFKILL_H */
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index 34a5555..8522490 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -138,8 +138,9 @@
__le32 RF_PARA;
__le32 RF_TIMING;
u8 GP_ENABLE;
- u8 GPIO;
- u8 reserved_12[2];
+ u8 GPIO0;
+ u8 GPIO1;
+ u8 reserved_12;
__le32 HSSI_PARA;
u8 reserved_13[4];
u8 TX_AGC_CTL;
@@ -194,8 +195,18 @@
void (*conf_erp)(struct ieee80211_hw *, struct ieee80211_bss_conf *);
};
-/* Tx/Rx flags are common between RTL818X chips */
-
+/**
+ * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips
+ *
+ * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption.
+ * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed.
+ * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble.
+ * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow.
+ * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection.
+ * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection.
+ * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame.
+ * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame.
+ */
enum rtl818x_tx_desc_flags {
RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15),
RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15),
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 38366a5..ea6a87c 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -1533,7 +1533,7 @@
}
/* Encapsulate a datagram and kick it into a TTY queue. */
-static int strip_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t strip_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct strip *strip_info = netdev_priv(dev);
@@ -1550,9 +1550,12 @@
if (time_after(jiffies, strip_info->pps_timer + HZ)) {
unsigned long t = jiffies - strip_info->pps_timer;
- unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t;
- unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t;
- unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t;
+ unsigned long rx_pps_count =
+ DIV_ROUND_CLOSEST(strip_info->rx_pps_count*HZ*8, t);
+ unsigned long tx_pps_count =
+ DIV_ROUND_CLOSEST(strip_info->tx_pps_count*HZ*8, t);
+ unsigned long sx_pps_count =
+ DIV_ROUND_CLOSEST(strip_info->sx_pps_count*HZ*8, t);
strip_info->pps_timer = jiffies;
strip_info->rx_pps_count = 0;
@@ -1582,7 +1585,7 @@
if (skb)
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index ab7fc5c..d634b2d 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -2841,7 +2841,8 @@
* the packet. We also prevent reentrance. Then we call the function
* to send the packet.
*/
-static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
+static netdev_tx_t wavelan_packet_xmit(struct sk_buff *skb,
+ struct net_device * dev)
{
net_local *lp = netdev_priv(dev);
unsigned long flags;
@@ -2891,7 +2892,7 @@
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
#endif
- return 0;
+ return NETDEV_TX_OK;
}
/*********************** HARDWARE CONFIGURATION ***********************/
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
index 2daa021..dbe8de6 100644
--- a/drivers/net/wireless/wavelan.p.h
+++ b/drivers/net/wireless/wavelan.p.h
@@ -611,7 +611,7 @@
wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer. */
void *,
short);
-static int
+static netdev_tx_t
wavelan_packet_xmit(struct sk_buff *, /* Send a packet. */
struct net_device *);
/* -------------------- HARDWARE CONFIGURATION -------------------- */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index c6d3006..431a20e 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3078,7 +3078,7 @@
* the packet. We also prevent reentrance. Then, we call the function
* to send the packet...
*/
-static int
+static netdev_tx_t
wavelan_packet_xmit(struct sk_buff * skb,
struct net_device * dev)
{
@@ -3113,7 +3113,7 @@
* able to detect collisions, therefore in theory we don't really
* need to pad. Jean II */
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
wv_packet_write(dev, skb->data, skb->len);
@@ -3122,7 +3122,7 @@
#ifdef DEBUG_TX_TRACE
printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
#endif
- return(0);
+ return NETDEV_TX_OK;
}
/********************** HARDWARE CONFIGURATION **********************/
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index 706fd300..81d9153 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -707,7 +707,7 @@
wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */
void *,
short);
-static int
+static netdev_tx_t
wavelan_packet_xmit(struct sk_buff *, /* Send a packet */
struct net_device *);
/* -------------------- HARDWARE CONFIGURATION -------------------- */
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index a82c4cd..7b14d5b 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -1,11 +1,52 @@
-config WL12XX
- tristate "TI wl1251/wl1271 support"
- depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS && EXPERIMENTAL
+menuconfig WL12XX
+ boolean "TI wl12xx driver support"
+ depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+ ---help---
+ This will enable TI wl12xx driver support. The drivers make
+ use of the mac80211 stack.
+
+config WL1251
+ tristate "TI wl1251 support"
+ depends on WL12XX && GENERIC_HARDIRQS
select FW_LOADER
select CRC7
---help---
This module adds support for wireless adapters based on
- TI wl1251/wl1271 chipsets.
+ TI wl1251 chipset.
- If you choose to build a module, it'll be called wl12xx. Say N if
+ If you choose to build a module, it'll be called wl1251. Say
+ N if unsure.
+
+config WL1251_SPI
+ tristate "TI wl1251 SPI support"
+ depends on WL1251 && SPI_MASTER
+ ---help---
+ This module adds support for the SPI interface of adapters using
+ TI wl1251 chipset. Select this if your platform is using
+ the SPI bus.
+
+ If you choose to build a module, it'll be called wl1251_spi.
+ Say N if unsure.
+
+config WL1251_SDIO
+ tristate "TI wl1251 SDIO support"
+ depends on WL1251 && MMC
+ ---help---
+ This module adds support for the SDIO interface of adapters using
+ TI wl1251 chipset. Select this if your platform is using
+ the SDIO bus.
+
+ If you choose to build a module, it'll be called
+ wl1251_sdio. Say N if unsure.
+
+config WL1271
+ tristate "TI wl1271 support"
+ depends on WL12XX && SPI_MASTER && GENERIC_HARDIRQS
+ select FW_LOADER
+ select CRC7
+ ---help---
+ This module adds support for wireless adapters based on the
+ TI wl1271 chipset.
+
+ If you choose to build a module, it'll be called wl1271. Say N if
unsure.
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
index d43de27..62e37ad 100644
--- a/drivers/net/wireless/wl12xx/Makefile
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -1,4 +1,14 @@
-wl12xx-objs = main.o spi.o event.o tx.o rx.o \
- ps.o cmd.o acx.o boot.o init.o wl1251.o \
- debugfs.o
-obj-$(CONFIG_WL12XX) += wl12xx.o
+wl1251-objs = wl1251_main.o wl1251_event.o \
+ wl1251_tx.o wl1251_rx.o wl1251_ps.o wl1251_cmd.o \
+ wl1251_acx.o wl1251_boot.o wl1251_init.o \
+ wl1251_debugfs.o wl1251_io.o
+
+obj-$(CONFIG_WL1251) += wl1251.o
+obj-$(CONFIG_WL1251_SPI) += wl1251_spi.o
+obj-$(CONFIG_WL1251_SDIO) += wl1251_sdio.o
+
+wl1271-objs = wl1271_main.o wl1271_spi.o wl1271_cmd.o \
+ wl1271_event.o wl1271_tx.o wl1271_rx.o \
+ wl1271_ps.o wl1271_acx.o wl1271_boot.o \
+ wl1271_init.o wl1271_debugfs.o
+obj-$(CONFIG_WL1271) += wl1271.o
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
deleted file mode 100644
index 1cfd458..0000000
--- a/drivers/net/wireless/wl12xx/acx.c
+++ /dev/null
@@ -1,689 +0,0 @@
-#include "acx.h"
-
-#include <linux/module.h>
-#include <linux/crc7.h>
-#include <linux/spi/spi.h>
-
-#include "wl12xx.h"
-#include "wl12xx_80211.h"
-#include "reg.h"
-#include "spi.h"
-#include "ps.h"
-
-int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
- u8 mgt_rate, u8 mgt_mod)
-{
- int ret;
- struct acx_fw_gen_frame_rates rates;
-
- wl12xx_debug(DEBUG_ACX, "acx frame rates");
-
- rates.header.id = ACX_FW_GEN_FRAME_RATES;
- rates.header.len = sizeof(struct acx_fw_gen_frame_rates) -
- sizeof(struct acx_header);
-
- rates.tx_ctrl_frame_rate = ctrl_rate;
- rates.tx_ctrl_frame_mod = ctrl_mod;
- rates.tx_mgt_frame_rate = mgt_rate;
- rates.tx_mgt_frame_mod = mgt_mod;
-
- ret = wl12xx_cmd_configure(wl, &rates, sizeof(rates));
- if (ret < 0) {
- wl12xx_error("Failed to set FW rates and modulation");
- return ret;
- }
-
- return 0;
-}
-
-
-int wl12xx_acx_station_id(struct wl12xx *wl)
-{
- int ret, i;
- struct dot11_station_id mac;
-
- wl12xx_debug(DEBUG_ACX, "acx dot11_station_id");
-
- mac.header.id = DOT11_STATION_ID;
- mac.header.len = sizeof(mac) - sizeof(struct acx_header);
-
- for (i = 0; i < ETH_ALEN; i++)
- mac.mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
-
- ret = wl12xx_cmd_configure(wl, &mac, sizeof(mac));
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id)
-{
- struct acx_dot11_default_key default_key;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
-
- default_key.header.id = DOT11_DEFAULT_KEY;
- default_key.header.len = sizeof(default_key) -
- sizeof(struct acx_header);
-
- default_key.id = key_id;
-
- ret = wl12xx_cmd_configure(wl, &default_key, sizeof(default_key));
- if (ret < 0) {
- wl12xx_error("Couldnt set default key");
- return ret;
- }
-
- wl->default_key = key_id;
-
- return 0;
-}
-
-int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval)
-{
- struct acx_wake_up_condition wake_up;
-
- wl12xx_debug(DEBUG_ACX, "acx wake up conditions");
-
- wake_up.header.id = ACX_WAKE_UP_CONDITIONS;
- wake_up.header.len = sizeof(wake_up) - sizeof(struct acx_header);
-
- wake_up.wake_up_event = WAKE_UP_EVENT_DTIM_BITMAP;
- wake_up.listen_interval = listen_interval;
-
- return wl12xx_cmd_configure(wl, &wake_up, sizeof(wake_up));
-}
-
-int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth)
-{
- int ret;
- struct acx_sleep_auth auth;
-
- wl12xx_debug(DEBUG_ACX, "acx sleep auth");
-
- auth.header.id = ACX_SLEEP_AUTH;
- auth.header.len = sizeof(auth) - sizeof(struct acx_header);
-
- auth.sleep_auth = sleep_auth;
-
- ret = wl12xx_cmd_configure(wl, &auth, sizeof(auth));
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len)
-{
- struct wl12xx_command cmd;
- struct acx_revision *rev;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx fw rev");
-
- memset(&cmd, 0, sizeof(cmd));
-
- ret = wl12xx_cmd_interrogate(wl, ACX_FW_REV, sizeof(*rev), &cmd);
- if (ret < 0) {
- wl12xx_warning("ACX_FW_REV interrogate failed");
- return ret;
- }
-
- rev = (struct acx_revision *) &cmd.parameters;
-
- /* be careful with the buffer sizes */
- strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
-
- /*
- * if the firmware version string is exactly
- * sizeof(rev->fw_version) long or fw_len is less than
- * sizeof(rev->fw_version) it won't be null terminated
- */
- buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
-
- return 0;
-}
-
-int wl12xx_acx_tx_power(struct wl12xx *wl, int power)
-{
- struct acx_current_tx_power ie;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
-
- if (power < 0 || power > 25)
- return -EINVAL;
-
- memset(&ie, 0, sizeof(ie));
-
- ie.header.id = DOT11_CUR_TX_PWR;
- ie.header.len = sizeof(ie) - sizeof(struct acx_header);
- ie.current_tx_power = power * 10;
-
- ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
- if (ret < 0) {
- wl12xx_warning("configure of tx power failed: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_feature_cfg(struct wl12xx *wl)
-{
- struct acx_feature_config feature;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx feature cfg");
-
- memset(&feature, 0, sizeof(feature));
-
- feature.header.id = ACX_FEATURE_CFG;
- feature.header.len = sizeof(feature) - sizeof(struct acx_header);
-
- /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
- feature.data_flow_options = 0;
- feature.options = 0;
-
- ret = wl12xx_cmd_configure(wl, &feature, sizeof(feature));
- if (ret < 0)
- wl12xx_error("Couldnt set HW encryption");
-
- return ret;
-}
-
-int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len)
-{
- struct wl12xx_command cmd;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx mem map");
-
- ret = wl12xx_cmd_interrogate(wl, ACX_MEM_MAP, len, &cmd);
- if (ret < 0)
- return ret;
- else if (cmd.status != CMD_STATUS_SUCCESS)
- return -EIO;
-
- memcpy(mem_map, &cmd.parameters, len);
-
- return 0;
-}
-
-int wl12xx_acx_data_path_params(struct wl12xx *wl,
- struct acx_data_path_params_resp *data_path)
-{
- struct acx_data_path_params params;
- struct wl12xx_command cmd;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx data path params");
-
- params.rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
- params.tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
-
- params.rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
- params.tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
-
- params.tx_complete_threshold = 1;
-
- params.tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
-
- params.tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
-
- params.header.id = ACX_DATA_PATH_PARAMS;
- params.header.len = sizeof(params) - sizeof(struct acx_header);
-
- ret = wl12xx_cmd_configure(wl, ¶ms, sizeof(params));
- if (ret < 0)
- return ret;
-
-
- ret = wl12xx_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
- sizeof(struct acx_data_path_params_resp),
- &cmd);
-
- if (ret < 0) {
- wl12xx_warning("failed to read data path parameters: %d", ret);
- return ret;
- } else if (cmd.status != CMD_STATUS_SUCCESS) {
- wl12xx_warning("data path parameter acx status failed");
- return -EIO;
- }
-
- memcpy(data_path, &cmd.parameters, sizeof(*data_path));
-
- return 0;
-}
-
-int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time)
-{
- struct rx_msdu_lifetime msdu_lifetime;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx rx msdu life time");
-
- msdu_lifetime.header.id = DOT11_RX_MSDU_LIFE_TIME;
- msdu_lifetime.header.len = sizeof(msdu_lifetime) -
- sizeof(struct acx_header);
- msdu_lifetime.lifetime = life_time;
-
- ret = wl12xx_cmd_configure(wl, &msdu_lifetime, sizeof(msdu_lifetime));
- if (ret < 0) {
- wl12xx_warning("failed to set rx msdu life time: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter)
-{
- struct acx_rx_config rx_config;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx rx config");
-
- rx_config.header.id = ACX_RX_CFG;
- rx_config.header.len = sizeof(rx_config) - sizeof(struct acx_header);
- rx_config.config_options = config;
- rx_config.filter_options = filter;
-
- ret = wl12xx_cmd_configure(wl, &rx_config, sizeof(rx_config));
- if (ret < 0) {
- wl12xx_warning("failed to set rx config: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_pd_threshold(struct wl12xx *wl)
-{
- struct acx_packet_detection packet_detection;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx data pd threshold");
-
- /* FIXME: threshold value not set */
- packet_detection.header.id = ACX_PD_THRESHOLD;
- packet_detection.header.len = sizeof(packet_detection) -
- sizeof(struct acx_header);
-
- ret = wl12xx_cmd_configure(wl, &packet_detection,
- sizeof(packet_detection));
- if (ret < 0) {
- wl12xx_warning("failed to set pd threshold: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time)
-{
- struct acx_slot slot;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx slot");
-
- slot.header.id = ACX_SLOT;
- slot.header.len = sizeof(slot) - sizeof(struct acx_header);
-
- slot.wone_index = STATION_WONE_INDEX;
- slot.slot_time = slot_time;
-
- ret = wl12xx_cmd_configure(wl, &slot, sizeof(slot));
- if (ret < 0) {
- wl12xx_warning("failed to set slot time: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_group_address_tbl(struct wl12xx *wl)
-{
- struct multicast_grp_addr_start multicast;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx group address tbl");
-
- /* MAC filtering */
- multicast.header.id = DOT11_GROUP_ADDRESS_TBL;
- multicast.header.len = sizeof(multicast) - sizeof(struct acx_header);
-
- multicast.enabled = 0;
- multicast.num_groups = 0;
- memset(multicast.mac_table, 0, ADDRESS_GROUP_MAX_LEN);
-
- ret = wl12xx_cmd_configure(wl, &multicast, sizeof(multicast));
- if (ret < 0) {
- wl12xx_warning("failed to set group addr table: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_service_period_timeout(struct wl12xx *wl)
-{
- struct acx_rx_timeout rx_timeout;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx service period timeout");
-
- /* RX timeout */
- rx_timeout.header.id = ACX_SERVICE_PERIOD_TIMEOUT;
- rx_timeout.header.len = sizeof(rx_timeout) - sizeof(struct acx_header);
-
- rx_timeout.ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
- rx_timeout.upsd_timeout = RX_TIMEOUT_UPSD_DEF;
-
- ret = wl12xx_cmd_configure(wl, &rx_timeout, sizeof(rx_timeout));
- if (ret < 0) {
- wl12xx_warning("failed to set service period timeout: %d",
- ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold)
-{
- struct acx_rts_threshold rts;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx rts threshold");
-
- rts.header.id = DOT11_RTS_THRESHOLD;
- rts.header.len = sizeof(rts) - sizeof(struct acx_header);
-
- rts.threshold = rts_threshold;
-
- ret = wl12xx_cmd_configure(wl, &rts, sizeof(rts));
- if (ret < 0) {
- wl12xx_warning("failed to set rts threshold: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl)
-{
- struct acx_beacon_filter_option beacon_filter;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx beacon filter opt");
-
- beacon_filter.header.id = ACX_BEACON_FILTER_OPT;
- beacon_filter.header.len = sizeof(beacon_filter) -
- sizeof(struct acx_header);
-
- beacon_filter.enable = 0;
- beacon_filter.max_num_beacons = 0;
-
- ret = wl12xx_cmd_configure(wl, &beacon_filter, sizeof(beacon_filter));
- if (ret < 0) {
- wl12xx_warning("failed to set beacon filter opt: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_beacon_filter_table(struct wl12xx *wl)
-{
- struct acx_beacon_filter_ie_table ie_table;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx beacon filter table");
-
- ie_table.header.id = ACX_BEACON_FILTER_TABLE;
- ie_table.header.len = sizeof(ie_table) - sizeof(struct acx_header);
-
- ie_table.num_ie = 0;
- memset(ie_table.table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
-
- ret = wl12xx_cmd_configure(wl, &ie_table, sizeof(ie_table));
- if (ret < 0) {
- wl12xx_warning("failed to set beacon filter table: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_sg_enable(struct wl12xx *wl)
-{
- struct acx_bt_wlan_coex pta;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx sg enable");
-
- pta.header.id = ACX_SG_ENABLE;
- pta.header.len = sizeof(pta) - sizeof(struct acx_header);
-
- pta.enable = SG_ENABLE;
-
- ret = wl12xx_cmd_configure(wl, &pta, sizeof(pta));
- if (ret < 0) {
- wl12xx_warning("failed to set softgemini enable: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_sg_cfg(struct wl12xx *wl)
-{
- struct acx_bt_wlan_coex_param param;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx sg cfg");
-
- /* BT-WLAN coext parameters */
- param.header.id = ACX_SG_CFG;
- param.header.len = sizeof(param) - sizeof(struct acx_header);
-
- param.min_rate = RATE_INDEX_24MBPS;
- param.bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
- param.wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
- param.sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
- param.rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
- param.tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
- param.rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
- param.tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
- param.wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
- param.bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
- param.next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
- param.wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
- param.hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
- param.next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
- param.antenna_type = PTA_ANTENNA_TYPE_DEF;
- param.signal_type = PTA_SIGNALING_TYPE_DEF;
- param.afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
- param.quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
- param.max_cts = PTA_MAX_NUM_CTS_DEF;
- param.wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
- param.bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
- param.missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
- param.wlan_elp_hp = PTA_ELP_HP_DEF;
- param.bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
- param.ack_mode_dual_ant = PTA_ACK_MODE_DEF;
- param.pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
- param.pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
- param.bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
-
- ret = wl12xx_cmd_configure(wl, ¶m, sizeof(param));
- if (ret < 0) {
- wl12xx_warning("failed to set sg config: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_cca_threshold(struct wl12xx *wl)
-{
- struct acx_energy_detection detection;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx cca threshold");
-
- detection.header.id = ACX_CCA_THRESHOLD;
- detection.header.len = sizeof(detection) - sizeof(struct acx_header);
-
- detection.rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
- detection.tx_energy_detection = 0;
-
- ret = wl12xx_cmd_configure(wl, &detection, sizeof(detection));
- if (ret < 0) {
- wl12xx_warning("failed to set cca threshold: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl)
-{
- struct acx_beacon_broadcast bb;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx bcn dtim options");
-
- bb.header.id = ACX_BCN_DTIM_OPTIONS;
- bb.header.len = sizeof(bb) - sizeof(struct acx_header);
-
- bb.beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
- bb.broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
- bb.rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
- bb.ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
-
- ret = wl12xx_cmd_configure(wl, &bb, sizeof(bb));
- if (ret < 0) {
- wl12xx_warning("failed to set rx config: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_aid(struct wl12xx *wl, u16 aid)
-{
- struct acx_aid acx_aid;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx aid");
-
- acx_aid.header.id = ACX_AID;
- acx_aid.header.len = sizeof(acx_aid) - sizeof(struct acx_header);
-
- acx_aid.aid = aid;
-
- ret = wl12xx_cmd_configure(wl, &acx_aid, sizeof(acx_aid));
- if (ret < 0) {
- wl12xx_warning("failed to set aid: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask)
-{
- struct acx_event_mask mask;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx event mbox mask");
-
- mask.header.id = ACX_EVENT_MBOX_MASK;
- mask.header.len = sizeof(mask) - sizeof(struct acx_header);
-
- /* high event mask is unused */
- mask.high_event_mask = 0xffffffff;
-
- mask.event_mask = event_mask;
-
- ret = wl12xx_cmd_configure(wl, &mask, sizeof(mask));
- if (ret < 0) {
- wl12xx_warning("failed to set aid: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble)
-{
- struct acx_preamble ie;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx_set_preamble");
-
- memset(&ie, 0, sizeof(ie));
-
- ie.header.id = ACX_PREAMBLE_TYPE;
- ie.header.len = sizeof(ie) - sizeof(struct acx_header);
- ie.preamble = preamble;
- ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
- if (ret < 0) {
- wl12xx_warning("Setting of preamble failed: %d", ret);
- return ret;
- }
- return 0;
-}
-
-int wl12xx_acx_cts_protect(struct wl12xx *wl,
- enum acx_ctsprotect_type ctsprotect)
-{
- struct acx_ctsprotect ie;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx_set_ctsprotect");
-
- memset(&ie, 0, sizeof(ie));
-
- ie.header.id = ACX_CTS_PROTECTION;
- ie.header.len = sizeof(ie) - sizeof(struct acx_header);
- ie.ctsprotect = ctsprotect;
- ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
- if (ret < 0) {
- wl12xx_warning("Setting of ctsprotect failed: %d", ret);
- return ret;
- }
- return 0;
-}
-
-int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats)
-{
- struct wl12xx_command *answer;
- int ret;
-
- wl12xx_debug(DEBUG_ACX, "acx statistics");
-
- answer = kmalloc(sizeof(*answer), GFP_KERNEL);
- if (!answer) {
- wl12xx_warning("could not allocate memory for acx statistics");
- ret = -ENOMEM;
- goto out;
- }
-
- ret = wl12xx_cmd_interrogate(wl, ACX_STATISTICS, sizeof(*answer),
- answer);
- if (ret < 0) {
- wl12xx_warning("acx statistics failed: %d", ret);
- goto out;
- }
-
- memcpy(stats, answer->parameters, sizeof(*stats));
-
-out:
- kfree(answer);
- return ret;
-}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
deleted file mode 100644
index fb2d234..0000000
--- a/drivers/net/wireless/wl12xx/acx.h
+++ /dev/null
@@ -1,1245 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_ACX_H__
-#define __WL12XX_ACX_H__
-
-#include "wl12xx.h"
-
-/* Target's information element */
-struct acx_header {
- u16 id;
- u16 len;
-};
-
-struct acx_error_counter {
- struct acx_header header;
-
- /* The number of PLCP errors since the last time this */
- /* information element was interrogated. This field is */
- /* automatically cleared when it is interrogated.*/
- u32 PLCP_error;
-
- /* The number of FCS errors since the last time this */
- /* information element was interrogated. This field is */
- /* automatically cleared when it is interrogated.*/
- u32 FCS_error;
-
- /* The number of MPDUs without PLCP header errors received*/
- /* since the last time this information element was interrogated. */
- /* This field is automatically cleared when it is interrogated.*/
- u32 valid_frame;
-
- /* the number of missed sequence numbers in the squentially */
- /* values of frames seq numbers */
- u32 seq_num_miss;
-} __attribute__ ((packed));
-
-struct acx_revision {
- struct acx_header header;
-
- /*
- * The WiLink firmware version, an ASCII string x.x.x.x,
- * that uniquely identifies the current firmware.
- * The left most digit is incremented each time a
- * significant change is made to the firmware, such as
- * code redesign or new platform support.
- * The second digit is incremented when major enhancements
- * are added or major fixes are made.
- * The third digit is incremented for each GA release.
- * The fourth digit is incremented for each build.
- * The first two digits identify a firmware release version,
- * in other words, a unique set of features.
- * The first three digits identify a GA release.
- */
- char fw_version[20];
-
- /*
- * This 4 byte field specifies the WiLink hardware version.
- * bits 0 - 15: Reserved.
- * bits 16 - 23: Version ID - The WiLink version ID
- * (1 = first spin, 2 = second spin, and so on).
- * bits 24 - 31: Chip ID - The WiLink chip ID.
- */
- u32 hw_version;
-} __attribute__ ((packed));
-
-enum wl12xx_psm_mode {
- /* Active mode */
- WL12XX_PSM_CAM = 0,
-
- /* Power save mode */
- WL12XX_PSM_PS = 1,
-
- /* Extreme low power */
- WL12XX_PSM_ELP = 2,
-};
-
-struct acx_sleep_auth {
- struct acx_header header;
-
- /* The sleep level authorization of the device. */
- /* 0 - Always active*/
- /* 1 - Power down mode: light / fast sleep*/
- /* 2 - ELP mode: Deep / Max sleep*/
- u8 sleep_auth;
- u8 padding[3];
-} __attribute__ ((packed));
-
-#define TIM_ELE_ID 5
-#define PARTIAL_VBM_MAX 251
-
-struct tim {
- u8 identity;
- u8 length;
- u8 dtim_count;
- u8 dtim_period;
- u8 bitmap_ctrl;
- u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
-} __attribute__ ((packed));
-
-/* Virtual Bit Map update */
-struct vbm_update_request {
- __le16 len;
- u8 padding[2];
- struct tim tim;
-} __attribute__ ((packed));
-
-enum {
- HOSTIF_PCI_MASTER_HOST_INDIRECT,
- HOSTIF_PCI_MASTER_HOST_DIRECT,
- HOSTIF_SLAVE,
- HOSTIF_PKT_RING,
- HOSTIF_DONTCARE = 0xFF
-};
-
-#define DEFAULT_UCAST_PRIORITY 0
-#define DEFAULT_RX_Q_PRIORITY 0
-#define DEFAULT_NUM_STATIONS 1
-#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */
-#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */
-#define TRACE_BUFFER_MAX_SIZE 256
-
-#define DP_RX_PACKET_RING_CHUNK_SIZE 1600
-#define DP_TX_PACKET_RING_CHUNK_SIZE 1600
-#define DP_RX_PACKET_RING_CHUNK_NUM 2
-#define DP_TX_PACKET_RING_CHUNK_NUM 2
-#define DP_TX_COMPLETE_TIME_OUT 20
-#define FW_TX_CMPLT_BLOCK_SIZE 16
-
-struct acx_data_path_params {
- struct acx_header header;
-
- u16 rx_packet_ring_chunk_size;
- u16 tx_packet_ring_chunk_size;
-
- u8 rx_packet_ring_chunk_num;
- u8 tx_packet_ring_chunk_num;
-
- /*
- * Maximum number of packets that can be gathered
- * in the TX complete ring before an interrupt
- * is generated.
- */
- u8 tx_complete_threshold;
-
- /* Number of pending TX complete entries in cyclic ring.*/
- u8 tx_complete_ring_depth;
-
- /*
- * Max num microseconds since a packet enters the TX
- * complete ring until an interrupt is generated.
- */
- u32 tx_complete_timeout;
-} __attribute__ ((packed));
-
-
-struct acx_data_path_params_resp {
- struct acx_header header;
-
- u16 rx_packet_ring_chunk_size;
- u16 tx_packet_ring_chunk_size;
-
- u8 rx_packet_ring_chunk_num;
- u8 tx_packet_ring_chunk_num;
-
- u8 pad[2];
-
- u32 rx_packet_ring_addr;
- u32 tx_packet_ring_addr;
-
- u32 rx_control_addr;
- u32 tx_control_addr;
-
- u32 tx_complete_addr;
-} __attribute__ ((packed));
-
-#define TX_MSDU_LIFETIME_MIN 0
-#define TX_MSDU_LIFETIME_MAX 3000
-#define TX_MSDU_LIFETIME_DEF 512
-#define RX_MSDU_LIFETIME_MIN 0
-#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF
-#define RX_MSDU_LIFETIME_DEF 512000
-
-struct rx_msdu_lifetime {
- struct acx_header header;
-
- /*
- * The maximum amount of time, in TU, before the
- * firmware discards the MSDU.
- */
- u32 lifetime;
-} __attribute__ ((packed));
-
-/*
- * RX Config Options Table
- * Bit Definition
- * === ==========
- * 31:14 Reserved
- * 13 Copy RX Status - when set, write three receive status words
- * to top of rx'd MPDUs.
- * When cleared, do not write three status words (added rev 1.5)
- * 12 Reserved
- * 11 RX Complete upon FCS error - when set, give rx complete
- * interrupt for FCS errors, after the rx filtering, e.g. unicast
- * frames not to us with FCS error will not generate an interrupt.
- * 10 SSID Filter Enable - When set, the WiLink discards all beacon,
- * probe request, and probe response frames with an SSID that does
- * not match the SSID specified by the host in the START/JOIN
- * command.
- * When clear, the WiLink receives frames with any SSID.
- * 9 Broadcast Filter Enable - When set, the WiLink discards all
- * broadcast frames. When clear, the WiLink receives all received
- * broadcast frames.
- * 8:6 Reserved
- * 5 BSSID Filter Enable - When set, the WiLink discards any frames
- * with a BSSID that does not match the BSSID specified by the
- * host.
- * When clear, the WiLink receives frames from any BSSID.
- * 4 MAC Addr Filter - When set, the WiLink discards any frames
- * with a destination address that does not match the MAC address
- * of the adaptor.
- * When clear, the WiLink receives frames destined to any MAC
- * address.
- * 3 Promiscuous - When set, the WiLink receives all valid frames
- * (i.e., all frames that pass the FCS check).
- * When clear, only frames that pass the other filters specified
- * are received.
- * 2 FCS - When set, the WiLink includes the FCS with the received
- * frame.
- * When cleared, the FCS is discarded.
- * 1 PLCP header - When set, write all data from baseband to frame
- * buffer including PHY header.
- * 0 Reserved - Always equal to 0.
- *
- * RX Filter Options Table
- * Bit Definition
- * === ==========
- * 31:12 Reserved - Always equal to 0.
- * 11 Association - When set, the WiLink receives all association
- * related frames (association request/response, reassocation
- * request/response, and disassociation). When clear, these frames
- * are discarded.
- * 10 Auth/De auth - When set, the WiLink receives all authentication
- * and de-authentication frames. When clear, these frames are
- * discarded.
- * 9 Beacon - When set, the WiLink receives all beacon frames.
- * When clear, these frames are discarded.
- * 8 Contention Free - When set, the WiLink receives all contention
- * free frames.
- * When clear, these frames are discarded.
- * 7 Control - When set, the WiLink receives all control frames.
- * When clear, these frames are discarded.
- * 6 Data - When set, the WiLink receives all data frames.
- * When clear, these frames are discarded.
- * 5 FCS Error - When set, the WiLink receives frames that have FCS
- * errors.
- * When clear, these frames are discarded.
- * 4 Management - When set, the WiLink receives all management
- * frames.
- * When clear, these frames are discarded.
- * 3 Probe Request - When set, the WiLink receives all probe request
- * frames.
- * When clear, these frames are discarded.
- * 2 Probe Response - When set, the WiLink receives all probe
- * response frames.
- * When clear, these frames are discarded.
- * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
- * frames.
- * When clear, these frames are discarded.
- * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames
- * that have reserved frame types and sub types as defined by the
- * 802.11 specification.
- * When clear, these frames are discarded.
- */
-struct acx_rx_config {
- struct acx_header header;
-
- u32 config_options;
- u32 filter_options;
-} __attribute__ ((packed));
-
-enum {
- QOS_AC_BE = 0,
- QOS_AC_BK,
- QOS_AC_VI,
- QOS_AC_VO,
- QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
-};
-
-#define MAX_NUM_OF_AC (QOS_HIGHEST_AC_INDEX+1)
-#define FIRST_AC_INDEX QOS_AC_BE
-#define MAX_NUM_OF_802_1d_TAGS 8
-#define AC_PARAMS_MAX_TSID 15
-#define MAX_APSD_CONF 0xffff
-
-#define QOS_TX_HIGH_MIN (0)
-#define QOS_TX_HIGH_MAX (100)
-
-#define QOS_TX_HIGH_BK_DEF (25)
-#define QOS_TX_HIGH_BE_DEF (35)
-#define QOS_TX_HIGH_VI_DEF (35)
-#define QOS_TX_HIGH_VO_DEF (35)
-
-#define QOS_TX_LOW_BK_DEF (15)
-#define QOS_TX_LOW_BE_DEF (25)
-#define QOS_TX_LOW_VI_DEF (25)
-#define QOS_TX_LOW_VO_DEF (25)
-
-struct acx_tx_queue_qos_config {
- struct acx_header header;
-
- u8 qid;
- u8 pad[3];
-
- /* Max number of blocks allowd in the queue */
- u16 high_threshold;
-
- /* Lowest memory blocks guaranteed for this queue */
- u16 low_threshold;
-} __attribute__ ((packed));
-
-struct acx_packet_detection {
- struct acx_header header;
-
- u32 threshold;
-} __attribute__ ((packed));
-
-
-enum acx_slot_type {
- SLOT_TIME_LONG = 0,
- SLOT_TIME_SHORT = 1,
- DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
- MAX_SLOT_TIMES = 0xFF
-};
-
-#define STATION_WONE_INDEX 0
-
-struct acx_slot {
- struct acx_header header;
-
- u8 wone_index; /* Reserved */
- u8 slot_time;
- u8 reserved[6];
-} __attribute__ ((packed));
-
-
-#define ADDRESS_GROUP_MAX (8)
-#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ADDRESS_GROUP_MAX)
-
-struct multicast_grp_addr_start {
- struct acx_header header;
-
- u8 enabled;
- u8 num_groups;
- u8 pad[2];
- u8 mac_table[ADDRESS_GROUP_MAX_LEN];
-} __attribute__ ((packed));
-
-
-#define RX_TIMEOUT_PS_POLL_MIN 0
-#define RX_TIMEOUT_PS_POLL_MAX (200000)
-#define RX_TIMEOUT_PS_POLL_DEF (15)
-#define RX_TIMEOUT_UPSD_MIN 0
-#define RX_TIMEOUT_UPSD_MAX (200000)
-#define RX_TIMEOUT_UPSD_DEF (15)
-
-struct acx_rx_timeout {
- struct acx_header header;
-
- /*
- * The longest time the STA will wait to receive
- * traffic from the AP after a PS-poll has been
- * transmitted.
- */
- u16 ps_poll_timeout;
-
- /*
- * The longest time the STA will wait to receive
- * traffic from the AP after a frame has been sent
- * from an UPSD enabled queue.
- */
- u16 upsd_timeout;
-} __attribute__ ((packed));
-
-#define RTS_THRESHOLD_MIN 0
-#define RTS_THRESHOLD_MAX 4096
-#define RTS_THRESHOLD_DEF 2347
-
-struct acx_rts_threshold {
- struct acx_header header;
-
- u16 threshold;
- u8 pad[2];
-} __attribute__ ((packed));
-
-struct acx_beacon_filter_option {
- struct acx_header header;
-
- u8 enable;
-
- /*
- * The number of beacons without the unicast TIM
- * bit set that the firmware buffers before
- * signaling the host about ready frames.
- * When set to 0 and the filter is enabled, beacons
- * without the unicast TIM bit set are dropped.
- */
- u8 max_num_beacons;
- u8 pad[2];
-} __attribute__ ((packed));
-
-/*
- * ACXBeaconFilterEntry (not 221)
- * Byte Offset Size (Bytes) Definition
- * =========== ============ ==========
- * 0 1 IE identifier
- * 1 1 Treatment bit mask
- *
- * ACXBeaconFilterEntry (221)
- * Byte Offset Size (Bytes) Definition
- * =========== ============ ==========
- * 0 1 IE identifier
- * 1 1 Treatment bit mask
- * 2 3 OUI
- * 5 1 Type
- * 6 2 Version
- *
- *
- * Treatment bit mask - The information element handling:
- * bit 0 - The information element is compared and transferred
- * in case of change.
- * bit 1 - The information element is transferred to the host
- * with each appearance or disappearance.
- * Note that both bits can be set at the same time.
- */
-#define BEACON_FILTER_TABLE_MAX_IE_NUM (32)
-#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
-#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2)
-#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
-#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
- BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
- (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
- BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
-
-struct acx_beacon_filter_ie_table {
- struct acx_header header;
-
- u8 num_ie;
- u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
- u8 pad[3];
-} __attribute__ ((packed));
-
-enum {
- SG_ENABLE = 0,
- SG_DISABLE,
- SG_SENSE_NO_ACTIVITY,
- SG_SENSE_ACTIVE
-};
-
-struct acx_bt_wlan_coex {
- struct acx_header header;
-
- /*
- * 0 -> PTA enabled
- * 1 -> PTA disabled
- * 2 -> sense no active mode, i.e.
- * an interrupt is sent upon
- * BT activity.
- * 3 -> PTA is switched on in response
- * to the interrupt sending.
- */
- u8 enable;
- u8 pad[3];
-} __attribute__ ((packed));
-
-#define PTA_ANTENNA_TYPE_DEF (0)
-#define PTA_BT_HP_MAXTIME_DEF (2000)
-#define PTA_WLAN_HP_MAX_TIME_DEF (5000)
-#define PTA_SENSE_DISABLE_TIMER_DEF (1350)
-#define PTA_PROTECTIVE_RX_TIME_DEF (1500)
-#define PTA_PROTECTIVE_TX_TIME_DEF (1500)
-#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
-#define PTA_SIGNALING_TYPE_DEF (1)
-#define PTA_AFH_LEVERAGE_ON_DEF (0)
-#define PTA_NUMBER_QUIET_CYCLE_DEF (0)
-#define PTA_MAX_NUM_CTS_DEF (3)
-#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2)
-#define PTA_NUMBER_OF_BT_PACKETS_DEF (2)
-#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500)
-#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000)
-#define PTA_CYCLE_TIME_FAST_DEF (8700)
-#define PTA_RX_FOR_AVALANCHE_DEF (5)
-#define PTA_ELP_HP_DEF (0)
-#define PTA_ANTI_STARVE_PERIOD_DEF (500)
-#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4)
-#define PTA_ALLOW_PA_SD_DEF (1)
-#define PTA_TIME_BEFORE_BEACON_DEF (6300)
-#define PTA_HPDM_MAX_TIME_DEF (1600)
-#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550)
-#define PTA_AUTO_MODE_NO_CTS_DEF (0)
-#define PTA_BT_HP_RESPECTED_DEF (3)
-#define PTA_WLAN_RX_MIN_RATE_DEF (24)
-#define PTA_ACK_MODE_DEF (1)
-
-struct acx_bt_wlan_coex_param {
- struct acx_header header;
-
- /*
- * The minimum rate of a received WLAN packet in the STA,
- * during protective mode, of which a new BT-HP request
- * during this Rx will always be respected and gain the antenna.
- */
- u32 min_rate;
-
- /* Max time the BT HP will be respected. */
- u16 bt_hp_max_time;
-
- /* Max time the WLAN HP will be respected. */
- u16 wlan_hp_max_time;
-
- /*
- * The time between the last BT activity
- * and the moment when the sense mode returns
- * to SENSE_INACTIVE.
- */
- u16 sense_disable_timer;
-
- /* Time before the next BT HP instance */
- u16 rx_time_bt_hp;
- u16 tx_time_bt_hp;
-
- /* range: 10-20000 default: 1500 */
- u16 rx_time_bt_hp_fast;
- u16 tx_time_bt_hp_fast;
-
- /* range: 2000-65535 default: 8700 */
- u16 wlan_cycle_fast;
-
- /* range: 0 - 15000 (Msec) default: 1000 */
- u16 bt_anti_starvation_period;
-
- /* range 400-10000(Usec) default: 3000 */
- u16 next_bt_lp_packet;
-
- /* Deafult: worst case for BT DH5 traffic */
- u16 wake_up_beacon;
-
- /* range: 0-50000(Usec) default: 1050 */
- u16 hp_dm_max_guard_time;
-
- /*
- * This is to prevent both BT & WLAN antenna
- * starvation.
- * Range: 100-50000(Usec) default:2550
- */
- u16 next_wlan_packet;
-
- /* 0 -> shared antenna */
- u8 antenna_type;
-
- /*
- * 0 -> TI legacy
- * 1 -> Palau
- */
- u8 signal_type;
-
- /*
- * BT AFH status
- * 0 -> no AFH
- * 1 -> from dedicated GPIO
- * 2 -> AFH on (from host)
- */
- u8 afh_leverage_on;
-
- /*
- * The number of cycles during which no
- * TX will be sent after 1 cycle of RX
- * transaction in protective mode
- */
- u8 quiet_cycle_num;
-
- /*
- * The maximum number of CTSs that will
- * be sent for receiving RX packet in
- * protective mode
- */
- u8 max_cts;
-
- /*
- * The number of WLAN packets
- * transferred in common mode before
- * switching to BT.
- */
- u8 wlan_packets_num;
-
- /*
- * The number of BT packets
- * transferred in common mode before
- * switching to WLAN.
- */
- u8 bt_packets_num;
-
- /* range: 1-255 default: 5 */
- u8 missed_rx_avalanche;
-
- /* range: 0-1 default: 1 */
- u8 wlan_elp_hp;
-
- /* range: 0 - 15 default: 4 */
- u8 bt_anti_starvation_cycles;
-
- u8 ack_mode_dual_ant;
-
- /*
- * Allow PA_SD assertion/de-assertion
- * during enabled BT activity.
- */
- u8 pa_sd_enable;
-
- /*
- * Enable/Disable PTA in auto mode:
- * Support Both Active & P.S modes
- */
- u8 pta_auto_mode_enable;
-
- /* range: 0 - 20 default: 1 */
- u8 bt_hp_respected_num;
-} __attribute__ ((packed));
-
-#define CCA_THRSH_ENABLE_ENERGY_D 0x140A
-#define CCA_THRSH_DISABLE_ENERGY_D 0xFFEF
-
-struct acx_energy_detection {
- struct acx_header header;
-
- /* The RX Clear Channel Assessment threshold in the PHY */
- u16 rx_cca_threshold;
- u8 tx_energy_detection;
- u8 pad;
-} __attribute__ ((packed));
-
-#define BCN_RX_TIMEOUT_DEF_VALUE 10000
-#define BROADCAST_RX_TIMEOUT_DEF_VALUE 20000
-#define RX_BROADCAST_IN_PS_DEF_VALUE 1
-#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
-
-struct acx_beacon_broadcast {
- struct acx_header header;
-
- u16 beacon_rx_timeout;
- u16 broadcast_timeout;
-
- /* Enables receiving of broadcast packets in PS mode */
- u8 rx_broadcast_in_ps;
-
- /* Consecutive PS Poll failures before updating the host */
- u8 ps_poll_threshold;
- u8 pad[2];
-} __attribute__ ((packed));
-
-struct acx_event_mask {
- struct acx_header header;
-
- u32 event_mask;
- u32 high_event_mask; /* Unused */
-} __attribute__ ((packed));
-
-#define CFG_RX_FCS BIT(2)
-#define CFG_RX_ALL_GOOD BIT(3)
-#define CFG_UNI_FILTER_EN BIT(4)
-#define CFG_BSSID_FILTER_EN BIT(5)
-#define CFG_MC_FILTER_EN BIT(6)
-#define CFG_MC_ADDR0_EN BIT(7)
-#define CFG_MC_ADDR1_EN BIT(8)
-#define CFG_BC_REJECT_EN BIT(9)
-#define CFG_SSID_FILTER_EN BIT(10)
-#define CFG_RX_INT_FCS_ERROR BIT(11)
-#define CFG_RX_INT_ENCRYPTED BIT(12)
-#define CFG_RX_WR_RX_STATUS BIT(13)
-#define CFG_RX_FILTER_NULTI BIT(14)
-#define CFG_RX_RESERVE BIT(15)
-#define CFG_RX_TIMESTAMP_TSF BIT(16)
-
-#define CFG_RX_RSV_EN BIT(0)
-#define CFG_RX_RCTS_ACK BIT(1)
-#define CFG_RX_PRSP_EN BIT(2)
-#define CFG_RX_PREQ_EN BIT(3)
-#define CFG_RX_MGMT_EN BIT(4)
-#define CFG_RX_FCS_ERROR BIT(5)
-#define CFG_RX_DATA_EN BIT(6)
-#define CFG_RX_CTL_EN BIT(7)
-#define CFG_RX_CF_EN BIT(8)
-#define CFG_RX_BCN_EN BIT(9)
-#define CFG_RX_AUTH_EN BIT(10)
-#define CFG_RX_ASSOC_EN BIT(11)
-
-#define SCAN_PASSIVE BIT(0)
-#define SCAN_5GHZ_BAND BIT(1)
-#define SCAN_TRIGGERED BIT(2)
-#define SCAN_PRIORITY_HIGH BIT(3)
-
-struct acx_fw_gen_frame_rates {
- struct acx_header header;
-
- u8 tx_ctrl_frame_rate; /* RATE_* */
- u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
- u8 tx_mgt_frame_rate;
- u8 tx_mgt_frame_mod;
-} __attribute__ ((packed));
-
-/* STA MAC */
-struct dot11_station_id {
- struct acx_header header;
-
- u8 mac[ETH_ALEN];
- u8 pad[2];
-} __attribute__ ((packed));
-
-/* HW encryption keys */
-#define NUM_ACCESS_CATEGORIES_COPY 4
-#define MAX_KEY_SIZE 32
-
-/* When set, disable HW encryption */
-#define DF_ENCRYPTION_DISABLE 0x01
-/* When set, disable HW decryption */
-#define DF_SNIFF_MODE_ENABLE 0x80
-
-struct acx_feature_config {
- struct acx_header header;
-
- u32 options;
- u32 data_flow_options;
-} __attribute__ ((packed));
-
-enum acx_key_action {
- KEY_ADD_OR_REPLACE = 1,
- KEY_REMOVE = 2,
- KEY_SET_ID = 3,
- MAX_KEY_ACTION = 0xffff,
-};
-
-enum acx_key_type {
- KEY_WEP_DEFAULT = 0,
- KEY_WEP_ADDR = 1,
- KEY_AES_GROUP = 4,
- KEY_AES_PAIRWISE = 5,
- KEY_WEP_GROUP = 6,
- KEY_TKIP_MIC_GROUP = 10,
- KEY_TKIP_MIC_PAIRWISE = 11,
-};
-
-/*
- *
- * key_type_e key size key format
- * ---------- --------- ----------
- * 0x00 5, 13, 29 Key data
- * 0x01 5, 13, 29 Key data
- * 0x04 16 16 bytes of key data
- * 0x05 16 16 bytes of key data
- * 0x0a 32 16 bytes of TKIP key data
- * 8 bytes of RX MIC key data
- * 8 bytes of TX MIC key data
- * 0x0b 32 16 bytes of TKIP key data
- * 8 bytes of RX MIC key data
- * 8 bytes of TX MIC key data
- *
- */
-
-struct acx_set_key {
- /* Ignored for default WEP key */
- u8 addr[ETH_ALEN];
-
- /* key_action_e */
- u16 key_action;
-
- u16 reserved_1;
-
- /* key size in bytes */
- u8 key_size;
-
- /* key_type_e */
- u8 key_type;
- u8 ssid_profile;
-
- /*
- * TKIP, AES: frame's key id field.
- * For WEP default key: key id;
- */
- u8 id;
- u8 reserved_2[6];
- u8 key[MAX_KEY_SIZE];
- u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
- u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
-} __attribute__ ((packed));
-
-struct acx_current_tx_power {
- struct acx_header header;
-
- u8 current_tx_power;
- u8 padding[3];
-} __attribute__ ((packed));
-
-struct acx_dot11_default_key {
- struct acx_header header;
-
- u8 id;
- u8 pad[3];
-} __attribute__ ((packed));
-
-struct acx_tsf_info {
- struct acx_header header;
-
- u32 current_tsf_msb;
- u32 current_tsf_lsb;
- u32 last_TBTT_msb;
- u32 last_TBTT_lsb;
- u8 last_dtim_count;
- u8 pad[3];
-} __attribute__ ((packed));
-
-/* 802.11 PS */
-enum acx_ps_mode {
- STATION_ACTIVE_MODE,
- STATION_POWER_SAVE_MODE
-};
-
-struct acx_ps_params {
- u8 ps_mode; /* STATION_* */
- u8 send_null_data; /* Do we have to send NULL data packet ? */
- u8 retries; /* Number of retires for the initial NULL data packet */
-
- /*
- * TUs during which the target stays awake after switching
- * to power save mode.
- */
- u8 hang_over_period;
- u16 null_data_rate;
- u8 pad[2];
-} __attribute__ ((packed));
-
-enum acx_wake_up_event {
- WAKE_UP_EVENT_BEACON_BITMAP = 0x01, /* Wake on every Beacon*/
- WAKE_UP_EVENT_DTIM_BITMAP = 0x02, /* Wake on every DTIM*/
- WAKE_UP_EVENT_N_DTIM_BITMAP = 0x04, /* Wake on every Nth DTIM */
- WAKE_UP_EVENT_N_BEACONS_BITMAP = 0x08, /* Wake on every Nth Beacon */
- WAKE_UP_EVENT_BITS_MASK = 0x0F
-};
-
-struct acx_wake_up_condition {
- struct acx_header header;
-
- u8 wake_up_event; /* Only one bit can be set */
- u8 listen_interval;
- u8 pad[2];
-} __attribute__ ((packed));
-
-struct acx_aid {
- struct acx_header header;
-
- /*
- * To be set when associated with an AP.
- */
- u16 aid;
- u8 pad[2];
-} __attribute__ ((packed));
-
-enum acx_preamble_type {
- ACX_PREAMBLE_LONG = 0,
- ACX_PREAMBLE_SHORT = 1
-};
-
-struct acx_preamble {
- struct acx_header header;
- /*
- * When set, the WiLink transmits the frames with a short preamble and
- * when cleared, the WiLink transmits the frames with a long preamble.
- */
- u8 preamble;
- u8 padding[3];
-} __attribute__ ((packed));
-
-enum acx_ctsprotect_type {
- CTSPROTECT_DISABLE = 0,
- CTSPROTECT_ENABLE = 1
-};
-
-struct acx_ctsprotect {
- struct acx_header header;
- u8 ctsprotect;
- u8 padding[3];
-} __attribute__ ((packed));
-
-struct acx_tx_statistics {
- u32 internal_desc_overflow;
-} __attribute__ ((packed));
-
-struct acx_rx_statistics {
- u32 out_of_mem;
- u32 hdr_overflow;
- u32 hw_stuck;
- u32 dropped;
- u32 fcs_err;
- u32 xfr_hint_trig;
- u32 path_reset;
- u32 reset_counter;
-} __attribute__ ((packed));
-
-struct acx_dma_statistics {
- u32 rx_requested;
- u32 rx_errors;
- u32 tx_requested;
- u32 tx_errors;
-} __attribute__ ((packed));
-
-struct acx_isr_statistics {
- /* host command complete */
- u32 cmd_cmplt;
-
- /* fiqisr() */
- u32 fiqs;
-
- /* (INT_STS_ND & INT_TRIG_RX_HEADER) */
- u32 rx_headers;
-
- /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
- u32 rx_completes;
-
- /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
- u32 rx_mem_overflow;
-
- /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
- u32 rx_rdys;
-
- /* irqisr() */
- u32 irqs;
-
- /* (INT_STS_ND & INT_TRIG_TX_PROC) */
- u32 tx_procs;
-
- /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
- u32 decrypt_done;
-
- /* (INT_STS_ND & INT_TRIG_DMA0) */
- u32 dma0_done;
-
- /* (INT_STS_ND & INT_TRIG_DMA1) */
- u32 dma1_done;
-
- /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
- u32 tx_exch_complete;
-
- /* (INT_STS_ND & INT_TRIG_COMMAND) */
- u32 commands;
-
- /* (INT_STS_ND & INT_TRIG_RX_PROC) */
- u32 rx_procs;
-
- /* (INT_STS_ND & INT_TRIG_PM_802) */
- u32 hw_pm_mode_changes;
-
- /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
- u32 host_acknowledges;
-
- /* (INT_STS_ND & INT_TRIG_PM_PCI) */
- u32 pci_pm;
-
- /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
- u32 wakeups;
-
- /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
- u32 low_rssi;
-} __attribute__ ((packed));
-
-struct acx_wep_statistics {
- /* WEP address keys configured */
- u32 addr_key_count;
-
- /* default keys configured */
- u32 default_key_count;
-
- u32 reserved;
-
- /* number of times that WEP key not found on lookup */
- u32 key_not_found;
-
- /* number of times that WEP key decryption failed */
- u32 decrypt_fail;
-
- /* WEP packets decrypted */
- u32 packets;
-
- /* WEP decrypt interrupts */
- u32 interrupt;
-} __attribute__ ((packed));
-
-#define ACX_MISSED_BEACONS_SPREAD 10
-
-struct acx_pwr_statistics {
- /* the amount of enters into power save mode (both PD & ELP) */
- u32 ps_enter;
-
- /* the amount of enters into ELP mode */
- u32 elp_enter;
-
- /* the amount of missing beacon interrupts to the host */
- u32 missing_bcns;
-
- /* the amount of wake on host-access times */
- u32 wake_on_host;
-
- /* the amount of wake on timer-expire */
- u32 wake_on_timer_exp;
-
- /* the number of packets that were transmitted with PS bit set */
- u32 tx_with_ps;
-
- /* the number of packets that were transmitted with PS bit clear */
- u32 tx_without_ps;
-
- /* the number of received beacons */
- u32 rcvd_beacons;
-
- /* the number of entering into PowerOn (power save off) */
- u32 power_save_off;
-
- /* the number of entries into power save mode */
- u16 enable_ps;
-
- /*
- * the number of exits from power save, not including failed PS
- * transitions
- */
- u16 disable_ps;
-
- /*
- * the number of times the TSF counter was adjusted because
- * of drift
- */
- u32 fix_tsf_ps;
-
- /* Gives statistics about the spread continuous missed beacons.
- * The 16 LSB are dedicated for the PS mode.
- * The 16 MSB are dedicated for the PS mode.
- * cont_miss_bcns_spread[0] - single missed beacon.
- * cont_miss_bcns_spread[1] - two continuous missed beacons.
- * cont_miss_bcns_spread[2] - three continuous missed beacons.
- * ...
- * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
- */
- u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
-
- /* the number of beacons in awake mode */
- u32 rcvd_awake_beacons;
-} __attribute__ ((packed));
-
-struct acx_mic_statistics {
- u32 rx_pkts;
- u32 calc_failure;
-} __attribute__ ((packed));
-
-struct acx_aes_statistics {
- u32 encrypt_fail;
- u32 decrypt_fail;
- u32 encrypt_packets;
- u32 decrypt_packets;
- u32 encrypt_interrupt;
- u32 decrypt_interrupt;
-} __attribute__ ((packed));
-
-struct acx_event_statistics {
- u32 heart_beat;
- u32 calibration;
- u32 rx_mismatch;
- u32 rx_mem_empty;
- u32 rx_pool;
- u32 oom_late;
- u32 phy_transmit_error;
- u32 tx_stuck;
-} __attribute__ ((packed));
-
-struct acx_ps_statistics {
- u32 pspoll_timeouts;
- u32 upsd_timeouts;
- u32 upsd_max_sptime;
- u32 upsd_max_apturn;
- u32 pspoll_max_apturn;
- u32 pspoll_utilization;
- u32 upsd_utilization;
-} __attribute__ ((packed));
-
-struct acx_rxpipe_statistics {
- u32 rx_prep_beacon_drop;
- u32 descr_host_int_trig_rx_data;
- u32 beacon_buffer_thres_host_int_trig_rx_data;
- u32 missed_beacon_host_int_trig_rx_data;
- u32 tx_xfr_host_int_trig_rx_data;
-} __attribute__ ((packed));
-
-struct acx_statistics {
- struct acx_header header;
-
- struct acx_tx_statistics tx;
- struct acx_rx_statistics rx;
- struct acx_dma_statistics dma;
- struct acx_isr_statistics isr;
- struct acx_wep_statistics wep;
- struct acx_pwr_statistics pwr;
- struct acx_aes_statistics aes;
- struct acx_mic_statistics mic;
- struct acx_event_statistics event;
- struct acx_ps_statistics ps;
- struct acx_rxpipe_statistics rxpipe;
-} __attribute__ ((packed));
-
-enum {
- ACX_WAKE_UP_CONDITIONS = 0x0002,
- ACX_MEM_CFG = 0x0003,
- ACX_SLOT = 0x0004,
- ACX_QUEUE_HEAD = 0x0005, /* for MASTER mode only */
- ACX_AC_CFG = 0x0007,
- ACX_MEM_MAP = 0x0008,
- ACX_AID = 0x000A,
- ACX_RADIO_PARAM = 0x000B, /* Not used */
- ACX_CFG = 0x000C, /* Not used */
- ACX_FW_REV = 0x000D,
- ACX_MEDIUM_USAGE = 0x000F,
- ACX_RX_CFG = 0x0010,
- ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */
- ACX_BSS_IN_PS = 0x0012, /* for AP only */
- ACX_STATISTICS = 0x0013, /* Debug API */
- ACX_FEATURE_CFG = 0x0015,
- ACX_MISC_CFG = 0x0017, /* Not used */
- ACX_TID_CFG = 0x001A,
- ACX_BEACON_FILTER_OPT = 0x001F,
- ACX_LOW_RSSI = 0x0020,
- ACX_NOISE_HIST = 0x0021,
- ACX_HDK_VERSION = 0x0022, /* ??? */
- ACX_PD_THRESHOLD = 0x0023,
- ACX_DATA_PATH_PARAMS = 0x0024, /* WO */
- ACX_DATA_PATH_RESP_PARAMS = 0x0024, /* RO */
- ACX_CCA_THRESHOLD = 0x0025,
- ACX_EVENT_MBOX_MASK = 0x0026,
-#ifdef FW_RUNNING_AS_AP
- ACX_DTIM_PERIOD = 0x0027, /* for AP only */
-#else
- ACX_WR_TBTT_AND_DTIM = 0x0027, /* STA only */
-#endif
- ACX_ACI_OPTION_CFG = 0x0029, /* OBSOLETE (for 1251)*/
- ACX_GPIO_CFG = 0x002A, /* Not used */
- ACX_GPIO_SET = 0x002B, /* Not used */
- ACX_PM_CFG = 0x002C, /* To Be Documented */
- ACX_CONN_MONIT_PARAMS = 0x002D,
- ACX_AVERAGE_RSSI = 0x002E, /* Not used */
- ACX_CONS_TX_FAILURE = 0x002F,
- ACX_BCN_DTIM_OPTIONS = 0x0031,
- ACX_SG_ENABLE = 0x0032,
- ACX_SG_CFG = 0x0033,
- ACX_ANTENNA_DIVERSITY_CFG = 0x0035, /* To Be Documented */
- ACX_LOW_SNR = 0x0037, /* To Be Documented */
- ACX_BEACON_FILTER_TABLE = 0x0038,
- ACX_ARP_IP_FILTER = 0x0039,
- ACX_ROAMING_STATISTICS_TBL = 0x003B,
- ACX_RATE_POLICY = 0x003D,
- ACX_CTS_PROTECTION = 0x003E,
- ACX_SLEEP_AUTH = 0x003F,
- ACX_PREAMBLE_TYPE = 0x0040,
- ACX_ERROR_CNT = 0x0041,
- ACX_FW_GEN_FRAME_RATES = 0x0042,
- ACX_IBSS_FILTER = 0x0044,
- ACX_SERVICE_PERIOD_TIMEOUT = 0x0045,
- ACX_TSF_INFO = 0x0046,
- ACX_CONFIG_PS_WMM = 0x0049,
- ACX_ENABLE_RX_DATA_FILTER = 0x004A,
- ACX_SET_RX_DATA_FILTER = 0x004B,
- ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
- ACX_POWER_LEVEL_TABLE = 0x004D,
- ACX_BET_ENABLE = 0x0050,
- DOT11_STATION_ID = 0x1001,
- DOT11_RX_MSDU_LIFE_TIME = 0x1004,
- DOT11_CUR_TX_PWR = 0x100D,
- DOT11_DEFAULT_KEY = 0x1010,
- DOT11_RX_DOT11_MODE = 0x1012,
- DOT11_RTS_THRESHOLD = 0x1013,
- DOT11_GROUP_ADDRESS_TBL = 0x1014,
-
- MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
-
- MAX_IE = 0xFFFF
-};
-
-
-int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
- u8 mgt_rate, u8 mgt_mod);
-int wl12xx_acx_station_id(struct wl12xx *wl);
-int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id);
-int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval);
-int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth);
-int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len);
-int wl12xx_acx_tx_power(struct wl12xx *wl, int power);
-int wl12xx_acx_feature_cfg(struct wl12xx *wl);
-int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len);
-int wl12xx_acx_data_path_params(struct wl12xx *wl,
- struct acx_data_path_params_resp *data_path);
-int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time);
-int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter);
-int wl12xx_acx_pd_threshold(struct wl12xx *wl);
-int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time);
-int wl12xx_acx_group_address_tbl(struct wl12xx *wl);
-int wl12xx_acx_service_period_timeout(struct wl12xx *wl);
-int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold);
-int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl);
-int wl12xx_acx_beacon_filter_table(struct wl12xx *wl);
-int wl12xx_acx_sg_enable(struct wl12xx *wl);
-int wl12xx_acx_sg_cfg(struct wl12xx *wl);
-int wl12xx_acx_cca_threshold(struct wl12xx *wl);
-int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl);
-int wl12xx_acx_aid(struct wl12xx *wl, u16 aid);
-int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask);
-int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble);
-int wl12xx_acx_cts_protect(struct wl12xx *wl,
- enum acx_ctsprotect_type ctsprotect);
-int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats);
-
-#endif /* __WL12XX_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
deleted file mode 100644
index 48ac08c..0000000
--- a/drivers/net/wireless/wl12xx/boot.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/gpio.h>
-
-#include "reg.h"
-#include "boot.h"
-#include "spi.h"
-#include "event.h"
-
-static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
-{
- enable_irq(wl->irq);
-}
-
-void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
-{
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
- wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
-}
-
-int wl12xx_boot_soft_reset(struct wl12xx *wl)
-{
- unsigned long timeout;
- u32 boot_data;
-
- /* perform soft reset */
- wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
-
- /* SOFT_RESET is self clearing */
- timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
- while (1) {
- boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
- wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
- if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
- break;
-
- if (time_after(jiffies, timeout)) {
- /* 1.2 check pWhalBus->uSelfClearTime if the
- * timeout was reached */
- wl12xx_error("soft reset timeout");
- return -1;
- }
-
- udelay(SOFT_RESET_STALL_TIME);
- }
-
- /* disable Rx/Tx */
- wl12xx_reg_write32(wl, ENABLE, 0x0);
-
- /* disable auto calibration on start*/
- wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
-
- return 0;
-}
-
-int wl12xx_boot_init_seq(struct wl12xx *wl)
-{
- u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
-
- /*
- * col #1: INTEGER_DIVIDER
- * col #2: FRACTIONAL_DIVIDER
- * col #3: ATTN_BB
- * col #4: ALPHA_BB
- * col #5: STOP_TIME_BB
- * col #6: BB_PLL_LOOP_FILTER
- */
- static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
-
- { 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/
- { 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
- { 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
- { 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
- { 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */
- };
-
- /* read NVS params */
- scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
- wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
-
- /* read ELP_CMD */
- elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
- wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
-
- /* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
- ref_freq = scr_pad6 & 0x000000FF;
- wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
-
- wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
-
- /*
- * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
- */
- wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
-
- /*
- * set the clock detect feature to work in the restart wu procedure
- * (ELP_CFG_MODE[14]) and Select the clock source type
- * (ELP_CFG_MODE[13:12])
- */
- tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
- wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
-
- /* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
- elp_cmd |= 0x00000040;
- wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
-
- /* PG 1.2: Set the BB PLL stable time to be 1000usec
- * (PLL_STABLE_TIME) */
- wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
-
- /* PG 1.2: read clock request time */
- init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
-
- /*
- * PG 1.2: set the clock request time to be ref_clk_settling_time -
- * 1ms = 4ms
- */
- if (init_data > 0x21)
- tmp = init_data - 0x21;
- else
- tmp = 0;
- wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
-
- /* set BB PLL configurations in RF AFE */
- wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
-
- /* set RF_AFE_REG_5 */
- wl12xx_reg_write32(wl, 0x003058d4, 0x50);
-
- /* set RF_AFE_CTRL_REG_2 */
- wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
-
- /*
- * change RF PLL and BB PLL divider for VCO clock and adjust VCO
- * bais current(RF_AFE_REG_13)
- */
- wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
-
- /* set BB PLL configurations */
- tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
- wl12xx_reg_write32(wl, 0x00305840, tmp);
-
- /* set fractional divider according to Appendix C-BB PLL
- * Calculations
- */
- tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
- wl12xx_reg_write32(wl, 0x00305844, tmp);
-
- /* set the initial data for the sigma delta */
- wl12xx_reg_write32(wl, 0x00305848, 0x3039);
-
- /*
- * set the accumulator attenuation value, calibration loop1
- * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
- * the VCO gain
- */
- tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
- (LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
- wl12xx_reg_write32(wl, 0x00305854, tmp);
-
- /*
- * set the calibration stop time after holdoff time expires and set
- * settling time HOLD_OFF_TIME_BB
- */
- tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
- wl12xx_reg_write32(wl, 0x00305858, tmp);
-
- /*
- * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
- * constant leakage current to linearize PFD to 0uA -
- * BB_ILOOPF[7:3]
- */
- tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
- wl12xx_reg_write32(wl, 0x003058f8, tmp);
-
- /*
- * set regulator output voltage for n divider to
- * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
- * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
- * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
- */
- wl12xx_reg_write32(wl, 0x003058f0, 0x29);
-
- /* enable restart wakeup sequence (ELP_CMD[0]) */
- wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
-
- /* restart sequence completed */
- udelay(2000);
-
- return 0;
-}
-
-int wl12xx_boot_run_firmware(struct wl12xx *wl)
-{
- int loop, ret;
- u32 chip_id, interrupt;
-
- wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
-
- chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
-
- wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
-
- if (chip_id != wl->chip.id) {
- wl12xx_error("chip id doesn't match after firmware boot");
- return -EIO;
- }
-
- /* wait for init to complete */
- loop = 0;
- while (loop++ < INIT_LOOP) {
- udelay(INIT_LOOP_DELAY);
- interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
-
- if (interrupt == 0xffffffff) {
- wl12xx_error("error reading hardware complete "
- "init indication");
- return -EIO;
- }
- /* check that ACX_INTR_INIT_COMPLETE is enabled */
- else if (interrupt & wl->chip.intr_init_complete) {
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
- wl->chip.intr_init_complete);
- break;
- }
- }
-
- if (loop >= INIT_LOOP) {
- wl12xx_error("timeout waiting for the hardware to "
- "complete initialization");
- return -EIO;
- }
-
- /* get hardware config command mail box */
- wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
-
- /* get hardware config event mail box */
- wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
-
- /* set the working partition to its "running" mode offset */
- wl12xx_set_partition(wl,
- wl->chip.p_table[PART_WORK].mem.start,
- wl->chip.p_table[PART_WORK].mem.size,
- wl->chip.p_table[PART_WORK].reg.start,
- wl->chip.p_table[PART_WORK].reg.size);
-
- wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
- wl->cmd_box_addr, wl->event_box_addr);
-
- /*
- * in case of full asynchronous mode the firmware event must be
- * ready to receive event from the command mailbox
- */
-
- /* enable gpio interrupts */
- wl12xx_boot_enable_interrupts(wl);
-
- wl->chip.op_target_enable_interrupts(wl);
-
- /* unmask all mbox events */
- wl->event_mask = 0xffffffff;
-
- ret = wl12xx_event_unmask(wl);
- if (ret < 0) {
- wl12xx_error("EVENT mask setting failed");
- return ret;
- }
-
- wl12xx_event_mbox_config(wl);
-
- /* firmware startup completed */
- return 0;
-}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
deleted file mode 100644
index 4fa7313..0000000
--- a/drivers/net/wireless/wl12xx/boot.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __BOOT_H__
-#define __BOOT_H__
-
-#include "wl12xx.h"
-
-int wl12xx_boot_soft_reset(struct wl12xx *wl);
-int wl12xx_boot_init_seq(struct wl12xx *wl);
-int wl12xx_boot_run_firmware(struct wl12xx *wl);
-void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl);
-
-/* number of times we try to read the INIT interrupt */
-#define INIT_LOOP 20000
-
-/* delay between retries */
-#define INIT_LOOP_DELAY 50
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
deleted file mode 100644
index f73ab60..0000000
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ /dev/null
@@ -1,353 +0,0 @@
-#include "cmd.h"
-
-#include <linux/module.h>
-#include <linux/crc7.h>
-#include <linux/spi/spi.h>
-
-#include "wl12xx.h"
-#include "wl12xx_80211.h"
-#include "reg.h"
-#include "spi.h"
-#include "ps.h"
-
-int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len)
-{
- struct wl12xx_command cmd;
- unsigned long timeout;
- size_t cmd_len;
- u32 intr;
- int ret = 0;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.id = type;
- cmd.status = 0;
- memcpy(cmd.parameters, buf, buf_len);
- cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN;
-
- wl12xx_ps_elp_wakeup(wl);
-
- wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len);
-
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
-
- timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT);
-
- intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
- while (!(intr & wl->chip.intr_cmd_complete)) {
- if (time_after(jiffies, timeout)) {
- wl12xx_error("command complete timeout");
- ret = -ETIMEDOUT;
- goto out;
- }
-
- msleep(1);
-
- intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
- }
-
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
- wl->chip.intr_cmd_complete);
-
-out:
- wl12xx_ps_elp_sleep(wl);
-
- return ret;
-}
-
-int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer)
-{
- int ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd test");
-
- ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len);
- if (ret < 0) {
- wl12xx_warning("TEST command failed");
- return ret;
- }
-
- if (answer) {
- struct wl12xx_command *cmd_answer;
-
- /*
- * The test command got in, we can read the answer.
- * The answer would be a wl12xx_command, where the
- * parameter array contains the actual answer.
- */
-
- wl12xx_ps_elp_wakeup(wl);
-
- wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
-
- wl12xx_ps_elp_sleep(wl);
-
- cmd_answer = buf;
- if (cmd_answer->status != CMD_STATUS_SUCCESS)
- wl12xx_error("TEST command answer error: %d",
- cmd_answer->status);
- }
-
- return 0;
-}
-
-
-int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
- void *answer)
-{
- struct wl12xx_command *cmd;
- struct acx_header header;
- int ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd interrogate");
-
- header.id = ie_id;
- header.len = ie_len - sizeof(header);
-
- ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header));
- if (ret < 0) {
- wl12xx_error("INTERROGATE command failed");
- return ret;
- }
-
- wl12xx_ps_elp_wakeup(wl);
-
- /* the interrogate command got in, we can read the answer */
- wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer,
- CMDMBOX_HEADER_LEN + ie_len);
-
- wl12xx_ps_elp_sleep(wl);
-
- cmd = answer;
- if (cmd->status != CMD_STATUS_SUCCESS)
- wl12xx_error("INTERROGATE command error: %d",
- cmd->status);
-
- return 0;
-
-}
-
-int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len)
-{
- int ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd configure");
-
- ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie,
- ie_len);
- if (ret < 0) {
- wl12xx_warning("CONFIGURE command NOK");
- return ret;
- }
-
- return 0;
-
-}
-
-int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
- void *bitmap, u16 bitmap_len, u8 bitmap_control)
-{
- struct vbm_update_request vbm;
- int ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd vbm");
-
- /* Count and period will be filled by the target */
- vbm.tim.bitmap_ctrl = bitmap_control;
- if (bitmap_len > PARTIAL_VBM_MAX) {
- wl12xx_warning("cmd vbm len is %d B, truncating to %d",
- bitmap_len, PARTIAL_VBM_MAX);
- bitmap_len = PARTIAL_VBM_MAX;
- }
- memcpy(vbm.tim.pvb_field, bitmap, bitmap_len);
- vbm.tim.identity = identity;
- vbm.tim.length = bitmap_len + 3;
-
- vbm.len = cpu_to_le16(bitmap_len + 5);
-
- ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm));
- if (ret < 0) {
- wl12xx_error("VBM command failed");
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable)
-{
- int ret;
- u16 cmd_rx, cmd_tx;
-
- wl12xx_debug(DEBUG_CMD, "cmd data path");
-
- if (enable) {
- cmd_rx = CMD_ENABLE_RX;
- cmd_tx = CMD_ENABLE_TX;
- } else {
- cmd_rx = CMD_DISABLE_RX;
- cmd_tx = CMD_DISABLE_TX;
- }
-
- ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel));
- if (ret < 0) {
- wl12xx_error("rx %s cmd for channel %d failed",
- enable ? "start" : "stop", channel);
- return ret;
- }
-
- wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d",
- enable ? "start" : "stop", channel);
-
- ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel));
- if (ret < 0) {
- wl12xx_error("tx %s cmd for channel %d failed",
- enable ? "start" : "stop", channel);
- return ret;
- }
-
- wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d",
- enable ? "start" : "stop", channel);
-
- return 0;
-}
-
-int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
- u16 beacon_interval, u8 wait)
-{
- unsigned long timeout;
- struct cmd_join join = {};
- int ret, i;
- u8 *bssid;
-
- /* FIXME: this should be in main.c */
- ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
- DEFAULT_HW_GEN_MODULATION_TYPE,
- wl->tx_mgmt_frm_rate,
- wl->tx_mgmt_frm_mod);
- if (ret < 0)
- return ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd join");
-
- /* Reverse order BSSID */
- bssid = (u8 *)&join.bssid_lsb;
- for (i = 0; i < ETH_ALEN; i++)
- bssid[i] = wl->bssid[ETH_ALEN - i - 1];
-
- join.rx_config_options = wl->rx_config;
- join.rx_filter_options = wl->rx_filter;
-
- join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
- RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
-
- join.beacon_interval = beacon_interval;
- join.dtim_interval = dtim_interval;
- join.bss_type = bss_type;
- join.channel = wl->channel;
- join.ctrl = JOIN_CMD_CTRL_TX_FLUSH;
-
- ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join));
- if (ret < 0) {
- wl12xx_error("failed to initiate cmd join");
- return ret;
- }
-
- timeout = msecs_to_jiffies(JOIN_TIMEOUT);
-
- /*
- * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
- * simplify locking we just sleep instead, for now
- */
- if (wait)
- msleep(10);
-
- return 0;
-}
-
-int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode)
-{
- int ret;
- struct acx_ps_params ps_params;
-
- /* FIXME: this should be in ps.c */
- ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int);
- if (ret < 0) {
- wl12xx_error("Couldnt set wake up conditions");
- return ret;
- }
-
- wl12xx_debug(DEBUG_CMD, "cmd set ps mode");
-
- ps_params.ps_mode = ps_mode;
- ps_params.send_null_data = 1;
- ps_params.retries = 5;
- ps_params.hang_over_period = 128;
- ps_params.null_data_rate = 1; /* 1 Mbps */
-
- ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params,
- sizeof(ps_params));
- if (ret < 0) {
- wl12xx_error("cmd set_ps_mode failed");
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer)
-{
- struct cmd_read_write_memory mem_cmd, *mem_answer;
- struct wl12xx_command cmd;
- int ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd read memory");
-
- memset(&mem_cmd, 0, sizeof(mem_cmd));
- mem_cmd.addr = addr;
- mem_cmd.size = len;
-
- ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd));
- if (ret < 0) {
- wl12xx_error("read memory command failed: %d", ret);
- return ret;
- }
-
- /* the read command got in, we can now read the answer */
- wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd,
- CMDMBOX_HEADER_LEN + sizeof(mem_cmd));
-
- if (cmd.status != CMD_STATUS_SUCCESS)
- wl12xx_error("error in read command result: %d", cmd.status);
-
- mem_answer = (struct cmd_read_write_memory *) cmd.parameters;
- memcpy(answer, mem_answer->value, len);
-
- return 0;
-}
-
-int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
- void *buf, size_t buf_len)
-{
- struct wl12xx_cmd_packet_template template;
- int ret;
-
- wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id);
-
- memset(&template, 0, sizeof(template));
-
- WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE);
- buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE);
- template.size = cpu_to_le16(buf_len);
-
- if (buf)
- memcpy(template.template, buf, buf_len);
-
- ret = wl12xx_cmd_send(wl, cmd_id, &template,
- sizeof(template.size) + buf_len);
- if (ret < 0) {
- wl12xx_warning("cmd set_template failed: %d", ret);
- return ret;
- }
-
- return 0;
-}
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
deleted file mode 100644
index aa307dc..0000000
--- a/drivers/net/wireless/wl12xx/cmd.h
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_CMD_H__
-#define __WL12XX_CMD_H__
-
-#include "wl12xx.h"
-
-int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len);
-int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer);
-int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
- void *answer);
-int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len);
-int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
- void *bitmap, u16 bitmap_len, u8 bitmap_control);
-int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable);
-int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
- u16 beacon_interval, u8 wait);
-int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
-int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer);
-int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
- void *buf, size_t buf_len);
-
-/* unit ms */
-#define WL12XX_COMMAND_TIMEOUT 2000
-
-#define WL12XX_MAX_TEMPLATE_SIZE 300
-
-struct wl12xx_cmd_packet_template {
- __le16 size;
- u8 template[WL12XX_MAX_TEMPLATE_SIZE];
-} __attribute__ ((packed));
-
-enum wl12xx_commands {
- CMD_RESET = 0,
- CMD_INTERROGATE = 1, /*use this to read information elements*/
- CMD_CONFIGURE = 2, /*use this to write information elements*/
- CMD_ENABLE_RX = 3,
- CMD_ENABLE_TX = 4,
- CMD_DISABLE_RX = 5,
- CMD_DISABLE_TX = 6,
- CMD_SCAN = 8,
- CMD_STOP_SCAN = 9,
- CMD_VBM = 10,
- CMD_START_JOIN = 11,
- CMD_SET_KEYS = 12,
- CMD_READ_MEMORY = 13,
- CMD_WRITE_MEMORY = 14,
- CMD_BEACON = 19,
- CMD_PROBE_RESP = 20,
- CMD_NULL_DATA = 21,
- CMD_PROBE_REQ = 22,
- CMD_TEST = 23,
- CMD_RADIO_CALIBRATE = 25, /* OBSOLETE */
- CMD_ENABLE_RX_PATH = 27, /* OBSOLETE */
- CMD_NOISE_HIST = 28,
- CMD_RX_RESET = 29,
- CMD_PS_POLL = 30,
- CMD_QOS_NULL_DATA = 31,
- CMD_LNA_CONTROL = 32,
- CMD_SET_BCN_MODE = 33,
- CMD_MEASUREMENT = 34,
- CMD_STOP_MEASUREMENT = 35,
- CMD_DISCONNECT = 36,
- CMD_SET_PS_MODE = 37,
- CMD_CHANNEL_SWITCH = 38,
- CMD_STOP_CHANNEL_SWICTH = 39,
- CMD_AP_DISCOVERY = 40,
- CMD_STOP_AP_DISCOVERY = 41,
- CMD_SPS_SCAN = 42,
- CMD_STOP_SPS_SCAN = 43,
- CMD_HEALTH_CHECK = 45,
- CMD_DEBUG = 46,
- CMD_TRIGGER_SCAN_TO = 47,
-
- NUM_COMMANDS,
- MAX_COMMAND_ID = 0xFFFF,
-};
-
-#define MAX_CMD_PARAMS 572
-
-struct wl12xx_command {
- u16 id;
- u16 status;
- u8 parameters[MAX_CMD_PARAMS];
-};
-
-enum {
- CMD_MAILBOX_IDLE = 0,
- CMD_STATUS_SUCCESS = 1,
- CMD_STATUS_UNKNOWN_CMD = 2,
- CMD_STATUS_UNKNOWN_IE = 3,
- CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11,
- CMD_STATUS_RX_BUSY = 13,
- CMD_STATUS_INVALID_PARAM = 14,
- CMD_STATUS_TEMPLATE_TOO_LARGE = 15,
- CMD_STATUS_OUT_OF_MEMORY = 16,
- CMD_STATUS_STA_TABLE_FULL = 17,
- CMD_STATUS_RADIO_ERROR = 18,
- CMD_STATUS_WRONG_NESTING = 19,
- CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/
- CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/
- MAX_COMMAND_STATUS = 0xff
-};
-
-
-/*
- * CMD_READ_MEMORY
- *
- * The host issues this command to read the WiLink device memory/registers.
- *
- * Note: The Base Band address has special handling (16 bits registers and
- * addresses). For more information, see the hardware specification.
- */
-/*
- * CMD_WRITE_MEMORY
- *
- * The host issues this command to write the WiLink device memory/registers.
- *
- * The Base Band address has special handling (16 bits registers and
- * addresses). For more information, see the hardware specification.
- */
-#define MAX_READ_SIZE 256
-
-struct cmd_read_write_memory {
- /* The address of the memory to read from or write to.*/
- u32 addr;
-
- /* The amount of data in bytes to read from or write to the WiLink
- * device.*/
- u32 size;
-
- /* The actual value read from or written to the Wilink. The source
- of this field is the Host in WRITE command or the Wilink in READ
- command. */
- u8 value[MAX_READ_SIZE];
-};
-
-#define CMDMBOX_HEADER_LEN 4
-#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
-
-
-struct basic_scan_parameters {
- u32 rx_config_options;
- u32 rx_filter_options;
-
- /*
- * Scan options:
- * bit 0: When this bit is set, passive scan.
- * bit 1: Band, when this bit is set we scan
- * in the 5Ghz band.
- * bit 2: voice mode, 0 for normal scan.
- * bit 3: scan priority, 1 for high priority.
- */
- u16 scan_options;
-
- /* Number of channels to scan */
- u8 num_channels;
-
- /* Number opf probe requests to send, per channel */
- u8 num_probe_requests;
-
- /* Rate and modulation for probe requests */
- u16 tx_rate;
-
- u8 tid_trigger;
- u8 ssid_len;
- u32 ssid[8];
-
-} __attribute__ ((packed));
-
-struct basic_scan_channel_parameters {
- u32 min_duration; /* in TU */
- u32 max_duration; /* in TU */
- u32 bssid_lsb;
- u16 bssid_msb;
-
- /*
- * bits 0-3: Early termination count.
- * bits 4-5: Early termination condition.
- */
- u8 early_termination;
-
- u8 tx_power_att;
- u8 channel;
- u8 pad[3];
-} __attribute__ ((packed));
-
-/* SCAN parameters */
-#define SCAN_MAX_NUM_OF_CHANNELS 16
-
-struct cmd_scan {
- struct basic_scan_parameters params;
- struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
-} __attribute__ ((packed));
-
-enum {
- BSS_TYPE_IBSS = 0,
- BSS_TYPE_STA_BSS = 2,
- BSS_TYPE_AP_BSS = 3,
- MAX_BSS_TYPE = 0xFF
-};
-
-#define JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */
-#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE 0x01 /* Early wakeup time */
-
-
-struct cmd_join {
- u32 bssid_lsb;
- u16 bssid_msb;
- u16 beacon_interval; /* in TBTTs */
- u32 rx_config_options;
- u32 rx_filter_options;
-
- /*
- * The target uses this field to determine the rate at
- * which to transmit control frame responses (such as
- * ACK or CTS frames).
- */
- u16 basic_rate_set;
- u8 dtim_interval;
- u8 tx_ctrl_frame_rate; /* OBSOLETE */
- u8 tx_ctrl_frame_mod; /* OBSOLETE */
- /*
- * bits 0-2: This bitwise field specifies the type
- * of BSS to start or join (BSS_TYPE_*).
- * bit 4: Band - The radio band in which to join
- * or start.
- * 0 - 2.4GHz band
- * 1 - 5GHz band
- * bits 3, 5-7: Reserved
- */
- u8 bss_type;
- u8 channel;
- u8 ssid_len;
- u8 ssid[IW_ESSID_MAX_SIZE];
- u8 ctrl; /* JOIN_CMD_CTRL_* */
- u8 tx_mgt_frame_rate; /* OBSOLETE */
- u8 tx_mgt_frame_mod; /* OBSOLETE */
- u8 reserved;
-} __attribute__ ((packed));
-
-
-#endif /* __WL12XX_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
deleted file mode 100644
index cdb368c..0000000
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "debugfs.h"
-
-#include <linux/skbuff.h>
-
-#include "wl12xx.h"
-#include "acx.h"
-
-/* ms */
-#define WL12XX_DEBUGFS_STATS_LIFETIME 1000
-
-/* debugfs macros idea from mac80211 */
-
-#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \
-static ssize_t name## _read(struct file *file, char __user *userbuf, \
- size_t count, loff_t *ppos) \
-{ \
- struct wl12xx *wl = file->private_data; \
- char buf[buflen]; \
- int res; \
- \
- res = scnprintf(buf, buflen, fmt "\n", ##value); \
- return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
-} \
- \
-static const struct file_operations name## _ops = { \
- .read = name## _read, \
- .open = wl12xx_open_file_generic, \
-};
-
-#define DEBUGFS_ADD(name, parent) \
- wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \
- wl, &name## _ops); \
- if (IS_ERR(wl->debugfs.name)) { \
- ret = PTR_ERR(wl->debugfs.name); \
- wl->debugfs.name = NULL; \
- goto out; \
- }
-
-#define DEBUGFS_DEL(name) \
- do { \
- debugfs_remove(wl->debugfs.name); \
- wl->debugfs.name = NULL; \
- } while (0)
-
-#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt) \
-static ssize_t sub## _ ##name## _read(struct file *file, \
- char __user *userbuf, \
- size_t count, loff_t *ppos) \
-{ \
- struct wl12xx *wl = file->private_data; \
- char buf[buflen]; \
- int res; \
- \
- wl12xx_debugfs_update_stats(wl); \
- \
- res = scnprintf(buf, buflen, fmt "\n", \
- wl->stats.fw_stats->sub.name); \
- return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
-} \
- \
-static const struct file_operations sub## _ ##name## _ops = { \
- .read = sub## _ ##name## _read, \
- .open = wl12xx_open_file_generic, \
-};
-
-#define DEBUGFS_FWSTATS_ADD(sub, name) \
- DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
-
-#define DEBUGFS_FWSTATS_DEL(sub, name) \
- DEBUGFS_DEL(sub## _ ##name)
-
-static void wl12xx_debugfs_update_stats(struct wl12xx *wl)
-{
- mutex_lock(&wl->mutex);
-
- if (wl->state == WL12XX_STATE_ON &&
- time_after(jiffies, wl->stats.fw_stats_update +
- msecs_to_jiffies(WL12XX_DEBUGFS_STATS_LIFETIME))) {
- wl12xx_acx_statistics(wl, wl->stats.fw_stats);
- wl->stats.fw_stats_update = jiffies;
- }
-
- mutex_unlock(&wl->mutex);
-}
-
-static int wl12xx_open_file_generic(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
-DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
-DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
-DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
-/* skipping wep.reserved */
-DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
-/* skipping cont_miss_bcns_spread for now */
-DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
-DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
- 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
-
-DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
-DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
- wl->stats.excessive_retries);
-
-static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
- size_t count, loff_t *ppos)
-{
- struct wl12xx *wl = file->private_data;
- u32 queue_len;
- char buf[20];
- int res;
-
- queue_len = skb_queue_len(&wl->tx_queue);
-
- res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
- return simple_read_from_buffer(userbuf, count, ppos, buf, res);
-}
-
-static const struct file_operations tx_queue_len_ops = {
- .read = tx_queue_len_read,
- .open = wl12xx_open_file_generic,
-};
-
-static void wl12xx_debugfs_delete_files(struct wl12xx *wl)
-{
- DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
-
- DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
- DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
- DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
- DEBUGFS_FWSTATS_DEL(rx, dropped);
- DEBUGFS_FWSTATS_DEL(rx, fcs_err);
- DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
- DEBUGFS_FWSTATS_DEL(rx, path_reset);
- DEBUGFS_FWSTATS_DEL(rx, reset_counter);
-
- DEBUGFS_FWSTATS_DEL(dma, rx_requested);
- DEBUGFS_FWSTATS_DEL(dma, rx_errors);
- DEBUGFS_FWSTATS_DEL(dma, tx_requested);
- DEBUGFS_FWSTATS_DEL(dma, tx_errors);
-
- DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
- DEBUGFS_FWSTATS_DEL(isr, fiqs);
- DEBUGFS_FWSTATS_DEL(isr, rx_headers);
- DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
- DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
- DEBUGFS_FWSTATS_DEL(isr, irqs);
- DEBUGFS_FWSTATS_DEL(isr, tx_procs);
- DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
- DEBUGFS_FWSTATS_DEL(isr, dma0_done);
- DEBUGFS_FWSTATS_DEL(isr, dma1_done);
- DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
- DEBUGFS_FWSTATS_DEL(isr, commands);
- DEBUGFS_FWSTATS_DEL(isr, rx_procs);
- DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
- DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
- DEBUGFS_FWSTATS_DEL(isr, pci_pm);
- DEBUGFS_FWSTATS_DEL(isr, wakeups);
- DEBUGFS_FWSTATS_DEL(isr, low_rssi);
-
- DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
- DEBUGFS_FWSTATS_DEL(wep, default_key_count);
- /* skipping wep.reserved */
- DEBUGFS_FWSTATS_DEL(wep, key_not_found);
- DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
- DEBUGFS_FWSTATS_DEL(wep, packets);
- DEBUGFS_FWSTATS_DEL(wep, interrupt);
-
- DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
- DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
- DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
- DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
- DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
- DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
- DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
- DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
- DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
- DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
- DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
- DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
- /* skipping cont_miss_bcns_spread for now */
- DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
-
- DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
- DEBUGFS_FWSTATS_DEL(mic, calc_failure);
-
- DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
- DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
- DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
- DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
- DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
- DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
-
- DEBUGFS_FWSTATS_DEL(event, heart_beat);
- DEBUGFS_FWSTATS_DEL(event, calibration);
- DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
- DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
- DEBUGFS_FWSTATS_DEL(event, rx_pool);
- DEBUGFS_FWSTATS_DEL(event, oom_late);
- DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
- DEBUGFS_FWSTATS_DEL(event, tx_stuck);
-
- DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
- DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
- DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
- DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
- DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
- DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
- DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
-
- DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
- DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
- DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
- DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
- DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
-
- DEBUGFS_DEL(tx_queue_len);
- DEBUGFS_DEL(retry_count);
- DEBUGFS_DEL(excessive_retries);
-}
-
-static int wl12xx_debugfs_add_files(struct wl12xx *wl)
-{
- int ret = 0;
-
- DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
-
- DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
- DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
- DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
- DEBUGFS_FWSTATS_ADD(rx, dropped);
- DEBUGFS_FWSTATS_ADD(rx, fcs_err);
- DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
- DEBUGFS_FWSTATS_ADD(rx, path_reset);
- DEBUGFS_FWSTATS_ADD(rx, reset_counter);
-
- DEBUGFS_FWSTATS_ADD(dma, rx_requested);
- DEBUGFS_FWSTATS_ADD(dma, rx_errors);
- DEBUGFS_FWSTATS_ADD(dma, tx_requested);
- DEBUGFS_FWSTATS_ADD(dma, tx_errors);
-
- DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
- DEBUGFS_FWSTATS_ADD(isr, fiqs);
- DEBUGFS_FWSTATS_ADD(isr, rx_headers);
- DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
- DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
- DEBUGFS_FWSTATS_ADD(isr, irqs);
- DEBUGFS_FWSTATS_ADD(isr, tx_procs);
- DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
- DEBUGFS_FWSTATS_ADD(isr, dma0_done);
- DEBUGFS_FWSTATS_ADD(isr, dma1_done);
- DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
- DEBUGFS_FWSTATS_ADD(isr, commands);
- DEBUGFS_FWSTATS_ADD(isr, rx_procs);
- DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
- DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
- DEBUGFS_FWSTATS_ADD(isr, pci_pm);
- DEBUGFS_FWSTATS_ADD(isr, wakeups);
- DEBUGFS_FWSTATS_ADD(isr, low_rssi);
-
- DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
- DEBUGFS_FWSTATS_ADD(wep, default_key_count);
- /* skipping wep.reserved */
- DEBUGFS_FWSTATS_ADD(wep, key_not_found);
- DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
- DEBUGFS_FWSTATS_ADD(wep, packets);
- DEBUGFS_FWSTATS_ADD(wep, interrupt);
-
- DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
- DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
- DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
- DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
- DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
- DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
- DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
- DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
- DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
- DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
- DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
- DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
- /* skipping cont_miss_bcns_spread for now */
- DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
-
- DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
- DEBUGFS_FWSTATS_ADD(mic, calc_failure);
-
- DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
- DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
- DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
- DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
- DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
- DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
-
- DEBUGFS_FWSTATS_ADD(event, heart_beat);
- DEBUGFS_FWSTATS_ADD(event, calibration);
- DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
- DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
- DEBUGFS_FWSTATS_ADD(event, rx_pool);
- DEBUGFS_FWSTATS_ADD(event, oom_late);
- DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
- DEBUGFS_FWSTATS_ADD(event, tx_stuck);
-
- DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
- DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
- DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
- DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
- DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
- DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
- DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
-
- DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
- DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
- DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
- DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
- DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
-
- DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
- DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
- DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
-
-out:
- if (ret < 0)
- wl12xx_debugfs_delete_files(wl);
-
- return ret;
-}
-
-void wl12xx_debugfs_reset(struct wl12xx *wl)
-{
- memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
- wl->stats.retry_count = 0;
- wl->stats.excessive_retries = 0;
-}
-
-int wl12xx_debugfs_init(struct wl12xx *wl)
-{
- int ret;
-
- wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
-
- if (IS_ERR(wl->debugfs.rootdir)) {
- ret = PTR_ERR(wl->debugfs.rootdir);
- wl->debugfs.rootdir = NULL;
- goto err;
- }
-
- wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
- wl->debugfs.rootdir);
-
- if (IS_ERR(wl->debugfs.fw_statistics)) {
- ret = PTR_ERR(wl->debugfs.fw_statistics);
- wl->debugfs.fw_statistics = NULL;
- goto err_root;
- }
-
- wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
- GFP_KERNEL);
-
- if (!wl->stats.fw_stats) {
- ret = -ENOMEM;
- goto err_fw;
- }
-
- wl->stats.fw_stats_update = jiffies;
-
- ret = wl12xx_debugfs_add_files(wl);
-
- if (ret < 0)
- goto err_file;
-
- return 0;
-
-err_file:
- kfree(wl->stats.fw_stats);
- wl->stats.fw_stats = NULL;
-
-err_fw:
- debugfs_remove(wl->debugfs.fw_statistics);
- wl->debugfs.fw_statistics = NULL;
-
-err_root:
- debugfs_remove(wl->debugfs.rootdir);
- wl->debugfs.rootdir = NULL;
-
-err:
- return ret;
-}
-
-void wl12xx_debugfs_exit(struct wl12xx *wl)
-{
- wl12xx_debugfs_delete_files(wl);
-
- kfree(wl->stats.fw_stats);
- wl->stats.fw_stats = NULL;
-
- debugfs_remove(wl->debugfs.fw_statistics);
- wl->debugfs.fw_statistics = NULL;
-
- debugfs_remove(wl->debugfs.rootdir);
- wl->debugfs.rootdir = NULL;
-
-}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h
deleted file mode 100644
index 562cdcb..0000000
--- a/drivers/net/wireless/wl12xx/debugfs.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef WL12XX_DEBUGFS_H
-#define WL12XX_DEBUGFS_H
-
-#include "wl12xx.h"
-
-int wl12xx_debugfs_init(struct wl12xx *wl);
-void wl12xx_debugfs_exit(struct wl12xx *wl);
-void wl12xx_debugfs_reset(struct wl12xx *wl);
-
-#endif /* WL12XX_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
deleted file mode 100644
index 99529ca..0000000
--- a/drivers/net/wireless/wl12xx/event.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "wl12xx.h"
-#include "reg.h"
-#include "spi.h"
-#include "event.h"
-#include "ps.h"
-
-static int wl12xx_event_scan_complete(struct wl12xx *wl,
- struct event_mailbox *mbox)
-{
- wl12xx_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
- mbox->scheduled_scan_status,
- mbox->scheduled_scan_channels);
-
- if (wl->scanning) {
- mutex_unlock(&wl->mutex);
- ieee80211_scan_completed(wl->hw, false);
- mutex_lock(&wl->mutex);
- wl->scanning = false;
- }
-
- return 0;
-}
-
-static void wl12xx_event_mbox_dump(struct event_mailbox *mbox)
-{
- wl12xx_debug(DEBUG_EVENT, "MBOX DUMP:");
- wl12xx_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
- wl12xx_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
-}
-
-static int wl12xx_event_process(struct wl12xx *wl, struct event_mailbox *mbox)
-{
- int ret;
- u32 vector;
-
- wl12xx_event_mbox_dump(mbox);
-
- vector = mbox->events_vector & ~(mbox->events_mask);
- wl12xx_debug(DEBUG_EVENT, "vector: 0x%x", vector);
-
- if (vector & SCAN_COMPLETE_EVENT_ID) {
- ret = wl12xx_event_scan_complete(wl, mbox);
- if (ret < 0)
- return ret;
- }
-
- if (vector & BSS_LOSE_EVENT_ID) {
- wl12xx_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
-
- if (wl->psm_requested && wl->psm) {
- ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
- if (ret < 0)
- return ret;
- }
- }
-
- return 0;
-}
-
-int wl12xx_event_unmask(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_event_mbox_mask(wl, ~(wl->event_mask));
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-void wl12xx_event_mbox_config(struct wl12xx *wl)
-{
- wl->mbox_ptr[0] = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
- wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
-
- wl12xx_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
- wl->mbox_ptr[0], wl->mbox_ptr[1]);
-}
-
-int wl12xx_event_handle(struct wl12xx *wl, u8 mbox_num)
-{
- struct event_mailbox mbox;
- int ret;
-
- wl12xx_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
-
- if (mbox_num > 1)
- return -EINVAL;
-
- /* first we read the mbox descriptor */
- wl12xx_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
- sizeof(struct event_mailbox));
-
- /* process the descriptor */
- ret = wl12xx_event_process(wl, &mbox);
- if (ret < 0)
- return ret;
-
- /* then we let the firmware know it can go on...*/
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
-
- return 0;
-}
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
deleted file mode 100644
index 1f4c2f7..0000000
--- a/drivers/net/wireless/wl12xx/event.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_EVENT_H__
-#define __WL12XX_EVENT_H__
-
-/*
- * Mbox events
- *
- * The event mechanism is based on a pair of event buffers (buffers A and
- * B) at fixed locations in the target's memory. The host processes one
- * buffer while the other buffer continues to collect events. If the host
- * is not processing events, an interrupt is issued to signal that a buffer
- * is ready. Once the host is done with processing events from one buffer,
- * it signals the target (with an ACK interrupt) that the event buffer is
- * free.
- */
-
-enum {
- RESERVED1_EVENT_ID = BIT(0),
- RESERVED2_EVENT_ID = BIT(1),
- MEASUREMENT_START_EVENT_ID = BIT(2),
- SCAN_COMPLETE_EVENT_ID = BIT(3),
- CALIBRATION_COMPLETE_EVENT_ID = BIT(4),
- ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5),
- PS_REPORT_EVENT_ID = BIT(6),
- SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7),
- HEALTH_REPORT_EVENT_ID = BIT(8),
- ACI_DETECTION_EVENT_ID = BIT(9),
- DEBUG_REPORT_EVENT_ID = BIT(10),
- MAC_STATUS_EVENT_ID = BIT(11),
- DISCONNECT_EVENT_COMPLETE_ID = BIT(12),
- JOIN_EVENT_COMPLETE_ID = BIT(13),
- CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14),
- BSS_LOSE_EVENT_ID = BIT(15),
- ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16),
- MEASUREMENT_COMPLETE_EVENT_ID = BIT(17),
- AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18),
- SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19),
- PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20),
- RESET_BSS_EVENT_ID = BIT(21),
- REGAINED_BSS_EVENT_ID = BIT(22),
- ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23),
- ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24),
- ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25),
-
- DBG_EVENT_ID = BIT(26),
- BT_PTA_SENSE_EVENT_ID = BIT(27),
- BT_PTA_PREDICTION_EVENT_ID = BIT(28),
- BT_PTA_AVALANCHE_EVENT_ID = BIT(29),
-
- PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30),
-
- EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
-};
-
-struct event_debug_report {
- u8 debug_event_id;
- u8 num_params;
- u16 pad;
- u32 report_1;
- u32 report_2;
- u32 report_3;
-} __attribute__ ((packed));
-
-struct event_mailbox {
- u32 events_vector;
- u32 events_mask;
- u32 reserved_1;
- u32 reserved_2;
-
- char average_rssi_level;
- u8 ps_status;
- u8 channel_switch_status;
- u8 scheduled_scan_status;
-
- /* Channels scanned by the scheduled scan */
- u16 scheduled_scan_channels;
-
- /* If bit 0 is set -> target's fatal error */
- u16 health_report;
- u16 bad_fft_counter;
- u8 bt_pta_sense_info;
- u8 bt_pta_protective_info;
- u32 reserved;
- u32 debug_report[2];
-
- /* Number of FCS errors since last event */
- u32 fcs_err_counter;
-
- struct event_debug_report report;
- u8 average_snr_level;
- u8 padding[19];
-} __attribute__ ((packed));
-
-int wl12xx_event_unmask(struct wl12xx *wl);
-void wl12xx_event_mbox_config(struct wl12xx *wl);
-int wl12xx_event_handle(struct wl12xx *wl, u8 mbox);
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
deleted file mode 100644
index 2a573a6..0000000
--- a/drivers/net/wireless/wl12xx/init.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "init.h"
-#include "wl12xx_80211.h"
-#include "acx.h"
-#include "cmd.h"
-
-int wl12xx_hw_init_hwenc_config(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_feature_cfg(wl);
- if (ret < 0) {
- wl12xx_warning("couldn't set feature config");
- return ret;
- }
-
- ret = wl12xx_acx_default_key(wl, wl->default_key);
- if (ret < 0) {
- wl12xx_warning("couldn't set default key");
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_hw_init_templates_config(struct wl12xx *wl)
-{
- int ret;
- u8 partial_vbm[PARTIAL_VBM_MAX];
-
- /* send empty templates for fw memory reservation */
- ret = wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
- sizeof(struct wl12xx_probe_req_template));
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_template_set(wl, CMD_NULL_DATA, NULL,
- sizeof(struct wl12xx_null_data_template));
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_template_set(wl, CMD_PS_POLL, NULL,
- sizeof(struct wl12xx_ps_poll_template));
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
- sizeof
- (struct wl12xx_qos_null_data_template));
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
- sizeof
- (struct wl12xx_probe_resp_template));
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_template_set(wl, CMD_BEACON, NULL,
- sizeof
- (struct wl12xx_beacon_template));
- if (ret < 0)
- return ret;
-
- /* tim templates, first reserve space then allocate an empty one */
- memset(partial_vbm, 0, PARTIAL_VBM_MAX);
- ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter)
-{
- int ret;
-
- ret = wl12xx_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_rx_config(wl, config, filter);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_phy_config(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_pd_threshold(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_slot(wl, DEFAULT_SLOT_TIME);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_group_address_tbl(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_service_period_timeout(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_beacon_filter(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_beacon_filter_opt(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_beacon_filter_table(wl);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_pta(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_sg_enable(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_acx_sg_cfg(wl);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_energy_detection(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_cca_threshold(wl);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl12xx_acx_bcn_dtim_options(wl);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_hw_init_power_auth(struct wl12xx *wl)
-{
- return wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
-}
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
deleted file mode 100644
index c8b6cd0..0000000
--- a/drivers/net/wireless/wl12xx/init.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_INIT_H__
-#define __WL12XX_INIT_H__
-
-#include "wl12xx.h"
-
-int wl12xx_hw_init_hwenc_config(struct wl12xx *wl);
-int wl12xx_hw_init_templates_config(struct wl12xx *wl);
-int wl12xx_hw_init_mem_config(struct wl12xx *wl);
-int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter);
-int wl12xx_hw_init_phy_config(struct wl12xx *wl);
-int wl12xx_hw_init_beacon_filter(struct wl12xx *wl);
-int wl12xx_hw_init_pta(struct wl12xx *wl);
-int wl12xx_hw_init_energy_detection(struct wl12xx *wl);
-int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl);
-int wl12xx_hw_init_power_auth(struct wl12xx *wl);
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
deleted file mode 100644
index 603d611..0000000
--- a/drivers/net/wireless/wl12xx/main.c
+++ /dev/null
@@ -1,1358 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/spi/spi.h>
-#include <linux/crc32.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/wl12xx.h>
-
-#include "wl12xx.h"
-#include "wl12xx_80211.h"
-#include "reg.h"
-#include "wl1251.h"
-#include "spi.h"
-#include "event.h"
-#include "tx.h"
-#include "rx.h"
-#include "ps.h"
-#include "init.h"
-#include "debugfs.h"
-
-static void wl12xx_disable_interrupts(struct wl12xx *wl)
-{
- disable_irq(wl->irq);
-}
-
-static void wl12xx_power_off(struct wl12xx *wl)
-{
- wl->set_power(false);
-}
-
-static void wl12xx_power_on(struct wl12xx *wl)
-{
- wl->set_power(true);
-}
-
-static irqreturn_t wl12xx_irq(int irq, void *cookie)
-{
- struct wl12xx *wl;
-
- wl12xx_debug(DEBUG_IRQ, "IRQ");
-
- wl = cookie;
-
- schedule_work(&wl->irq_work);
-
- return IRQ_HANDLED;
-}
-
-static int wl12xx_fetch_firmware(struct wl12xx *wl)
-{
- const struct firmware *fw;
- int ret;
-
- ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev);
-
- if (ret < 0) {
- wl12xx_error("could not get firmware: %d", ret);
- return ret;
- }
-
- if (fw->size % 4) {
- wl12xx_error("firmware size is not multiple of 32 bits: %zu",
- fw->size);
- ret = -EILSEQ;
- goto out;
- }
-
- wl->fw_len = fw->size;
- wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
-
- if (!wl->fw) {
- wl12xx_error("could not allocate memory for the firmware");
- ret = -ENOMEM;
- goto out;
- }
-
- memcpy(wl->fw, fw->data, wl->fw_len);
-
- ret = 0;
-
-out:
- release_firmware(fw);
-
- return ret;
-}
-
-static int wl12xx_fetch_nvs(struct wl12xx *wl)
-{
- const struct firmware *fw;
- int ret;
-
- ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev);
-
- if (ret < 0) {
- wl12xx_error("could not get nvs file: %d", ret);
- return ret;
- }
-
- if (fw->size % 4) {
- wl12xx_error("nvs size is not multiple of 32 bits: %zu",
- fw->size);
- ret = -EILSEQ;
- goto out;
- }
-
- wl->nvs_len = fw->size;
- wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
-
- if (!wl->nvs) {
- wl12xx_error("could not allocate memory for the nvs file");
- ret = -ENOMEM;
- goto out;
- }
-
- memcpy(wl->nvs, fw->data, wl->nvs_len);
-
- ret = 0;
-
-out:
- release_firmware(fw);
-
- return ret;
-}
-
-static void wl12xx_fw_wakeup(struct wl12xx *wl)
-{
- u32 elp_reg;
-
- elp_reg = ELPCTRL_WAKE_UP;
- wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
- elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
-
- if (!(elp_reg & ELPCTRL_WLAN_READY)) {
- wl12xx_warning("WLAN not ready");
- elp_reg = ELPCTRL_WAKE_UP_WLAN_READY;
- wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
- }
-}
-
-static int wl12xx_chip_wakeup(struct wl12xx *wl)
-{
- int ret = 0;
-
- wl12xx_power_on(wl);
- msleep(wl->chip.power_on_sleep);
- wl12xx_spi_reset(wl);
- wl12xx_spi_init(wl);
-
- /* We don't need a real memory partition here, because we only want
- * to use the registers at this point. */
- wl12xx_set_partition(wl,
- 0x00000000,
- 0x00000000,
- REGISTERS_BASE,
- REGISTERS_DOWN_SIZE);
-
- /* ELP module wake up */
- wl12xx_fw_wakeup(wl);
-
- /* whal_FwCtrl_BootSm() */
-
- /* 0. read chip id from CHIP_ID */
- wl->chip.id = wl12xx_reg_read32(wl, CHIP_ID_B);
-
- /* 1. check if chip id is valid */
-
- switch (wl->chip.id) {
- case CHIP_ID_1251_PG12:
- wl12xx_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
- wl->chip.id);
-
- wl1251_setup(wl);
-
- break;
- case CHIP_ID_1271_PG10:
- case CHIP_ID_1251_PG10:
- case CHIP_ID_1251_PG11:
- default:
- wl12xx_error("unsupported chip id: 0x%x", wl->chip.id);
- ret = -ENODEV;
- goto out;
- }
-
- if (wl->fw == NULL) {
- ret = wl12xx_fetch_firmware(wl);
- if (ret < 0)
- goto out;
- }
-
- /* No NVS from netlink, try to get it from the filesystem */
- if (wl->nvs == NULL) {
- ret = wl12xx_fetch_nvs(wl);
- if (ret < 0)
- goto out;
- }
-
-out:
- return ret;
-}
-
-static void wl12xx_filter_work(struct work_struct *work)
-{
- struct wl12xx *wl =
- container_of(work, struct wl12xx, filter_work);
- int ret;
-
- mutex_lock(&wl->mutex);
-
- if (wl->state == WL12XX_STATE_OFF)
- goto out;
-
- ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
- if (ret < 0)
- goto out;
-
-out:
- mutex_unlock(&wl->mutex);
-}
-
-int wl12xx_plt_start(struct wl12xx *wl)
-{
- int ret;
-
- wl12xx_notice("power up");
-
- if (wl->state != WL12XX_STATE_OFF) {
- wl12xx_error("cannot go into PLT state because not "
- "in off state: %d", wl->state);
- return -EBUSY;
- }
-
- wl->state = WL12XX_STATE_PLT;
-
- ret = wl12xx_chip_wakeup(wl);
- if (ret < 0)
- return ret;
-
- ret = wl->chip.op_boot(wl);
- if (ret < 0)
- return ret;
-
- wl12xx_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
-
- ret = wl->chip.op_plt_init(wl);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int wl12xx_plt_stop(struct wl12xx *wl)
-{
- wl12xx_notice("power down");
-
- if (wl->state != WL12XX_STATE_PLT) {
- wl12xx_error("cannot power down because not in PLT "
- "state: %d", wl->state);
- return -EBUSY;
- }
-
- wl12xx_disable_interrupts(wl);
- wl12xx_power_off(wl);
-
- wl->state = WL12XX_STATE_OFF;
-
- return 0;
-}
-
-
-static int wl12xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct wl12xx *wl = hw->priv;
-
- skb_queue_tail(&wl->tx_queue, skb);
-
- schedule_work(&wl->tx_work);
-
- /*
- * The workqueue is slow to process the tx_queue and we need stop
- * the queue here, otherwise the queue will get too long.
- */
- if (skb_queue_len(&wl->tx_queue) >= WL12XX_TX_QUEUE_MAX_LENGTH) {
- ieee80211_stop_queues(wl->hw);
-
- /*
- * FIXME: this is racy, the variable is not properly
- * protected. Maybe fix this by removing the stupid
- * variable altogether and checking the real queue state?
- */
- wl->tx_queue_stopped = true;
- }
-
- return NETDEV_TX_OK;
-}
-
-static int wl12xx_op_start(struct ieee80211_hw *hw)
-{
- struct wl12xx *wl = hw->priv;
- int ret = 0;
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 start");
-
- mutex_lock(&wl->mutex);
-
- if (wl->state != WL12XX_STATE_OFF) {
- wl12xx_error("cannot start because not in off state: %d",
- wl->state);
- ret = -EBUSY;
- goto out;
- }
-
- ret = wl12xx_chip_wakeup(wl);
- if (ret < 0)
- return ret;
-
- ret = wl->chip.op_boot(wl);
- if (ret < 0)
- goto out;
-
- ret = wl->chip.op_hw_init(wl);
- if (ret < 0)
- goto out;
-
- ret = wl12xx_acx_station_id(wl);
- if (ret < 0)
- goto out;
-
- wl->state = WL12XX_STATE_ON;
-
- wl12xx_info("firmware booted (%s)", wl->chip.fw_ver);
-
-out:
- if (ret < 0)
- wl12xx_power_off(wl);
-
- mutex_unlock(&wl->mutex);
-
- return ret;
-}
-
-static void wl12xx_op_stop(struct ieee80211_hw *hw)
-{
- struct wl12xx *wl = hw->priv;
-
- wl12xx_info("down");
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 stop");
-
- mutex_lock(&wl->mutex);
-
- WARN_ON(wl->state != WL12XX_STATE_ON);
-
- if (wl->scanning) {
- mutex_unlock(&wl->mutex);
- ieee80211_scan_completed(wl->hw, true);
- mutex_lock(&wl->mutex);
- wl->scanning = false;
- }
-
- wl->state = WL12XX_STATE_OFF;
-
- wl12xx_disable_interrupts(wl);
-
- mutex_unlock(&wl->mutex);
-
- cancel_work_sync(&wl->irq_work);
- cancel_work_sync(&wl->tx_work);
- cancel_work_sync(&wl->filter_work);
-
- mutex_lock(&wl->mutex);
-
- /* let's notify MAC80211 about the remaining pending TX frames */
- wl12xx_tx_flush(wl);
-
- wl12xx_power_off(wl);
-
- memset(wl->bssid, 0, ETH_ALEN);
- wl->listen_int = 1;
- wl->bss_type = MAX_BSS_TYPE;
-
- wl->data_in_count = 0;
- wl->rx_counter = 0;
- wl->rx_handled = 0;
- wl->rx_current_buffer = 0;
- wl->rx_last_id = 0;
- wl->next_tx_complete = 0;
- wl->elp = false;
- wl->psm = 0;
- wl->tx_queue_stopped = false;
- wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
-
- wl12xx_debugfs_reset(wl);
-
- mutex_unlock(&wl->mutex);
-}
-
-static int wl12xx_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
-{
- struct wl12xx *wl = hw->priv;
- DECLARE_MAC_BUF(mac);
- int ret = 0;
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s",
- conf->type, print_mac(mac, conf->mac_addr));
-
- mutex_lock(&wl->mutex);
-
- switch (conf->type) {
- case NL80211_IFTYPE_STATION:
- wl->bss_type = BSS_TYPE_STA_BSS;
- break;
- case NL80211_IFTYPE_ADHOC:
- wl->bss_type = BSS_TYPE_IBSS;
- break;
- default:
- ret = -EOPNOTSUPP;
- goto out;
- }
-
- if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
- memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
- SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
- ret = wl12xx_acx_station_id(wl);
- if (ret < 0)
- goto out;
- }
-
-out:
- mutex_unlock(&wl->mutex);
- return ret;
-}
-
-static void wl12xx_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
-{
- wl12xx_debug(DEBUG_MAC80211, "mac80211 remove interface");
-}
-
-static int wl12xx_build_null_data(struct wl12xx *wl)
-{
- struct wl12xx_null_data_template template;
-
- if (!is_zero_ether_addr(wl->bssid)) {
- memcpy(template.header.da, wl->bssid, ETH_ALEN);
- memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
- } else {
- memset(template.header.da, 0xff, ETH_ALEN);
- memset(template.header.bssid, 0xff, ETH_ALEN);
- }
-
- memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
- template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
- IEEE80211_STYPE_NULLFUNC);
-
- return wl12xx_cmd_template_set(wl, CMD_NULL_DATA, &template,
- sizeof(template));
-
-}
-
-static int wl12xx_build_ps_poll(struct wl12xx *wl, u16 aid)
-{
- struct wl12xx_ps_poll_template template;
-
- memcpy(template.bssid, wl->bssid, ETH_ALEN);
- memcpy(template.ta, wl->mac_addr, ETH_ALEN);
- template.aid = aid;
- template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
-
- return wl12xx_cmd_template_set(wl, CMD_PS_POLL, &template,
- sizeof(template));
-
-}
-
-static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct wl12xx *wl = hw->priv;
- struct ieee80211_conf *conf = &hw->conf;
- int channel, ret = 0;
-
- channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
- channel,
- conf->flags & IEEE80211_CONF_PS ? "on" : "off",
- conf->power_level);
-
- mutex_lock(&wl->mutex);
-
- if (channel != wl->channel) {
- /* FIXME: use beacon interval provided by mac80211 */
- ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
- if (ret < 0)
- goto out;
-
- wl->channel = channel;
- }
-
- ret = wl12xx_build_null_data(wl);
- if (ret < 0)
- goto out;
-
- if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
- wl12xx_info("psm enabled");
-
- wl->psm_requested = true;
-
- /*
- * We enter PSM only if we're already associated.
- * If we're not, we'll enter it when joining an SSID,
- * through the bss_info_changed() hook.
- */
- ret = wl12xx_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
- } else if (!(conf->flags & IEEE80211_CONF_PS) &&
- wl->psm_requested) {
- wl12xx_info("psm disabled");
-
- wl->psm_requested = false;
-
- if (wl->psm)
- ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
- }
-
- if (conf->power_level != wl->power_level) {
- ret = wl12xx_acx_tx_power(wl, conf->power_level);
- if (ret < 0)
- goto out;
-
- wl->power_level = conf->power_level;
- }
-
-out:
- mutex_unlock(&wl->mutex);
- return ret;
-}
-
-#define WL12XX_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
- FIF_ALLMULTI | \
- FIF_FCSFAIL | \
- FIF_BCN_PRBRESP_PROMISC | \
- FIF_CONTROL | \
- FIF_OTHER_BSS)
-
-static void wl12xx_op_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed,
- unsigned int *total,
- int mc_count,
- struct dev_addr_list *mc_list)
-{
- struct wl12xx *wl = hw->priv;
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 configure filter");
-
- *total &= WL12XX_SUPPORTED_FILTERS;
- changed &= WL12XX_SUPPORTED_FILTERS;
-
- if (changed == 0)
- /* no filters which we support changed */
- return;
-
- /* FIXME: wl->rx_config and wl->rx_filter are not protected */
-
- wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
- wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
-
- if (*total & FIF_PROMISC_IN_BSS) {
- wl->rx_config |= CFG_BSSID_FILTER_EN;
- wl->rx_config |= CFG_RX_ALL_GOOD;
- }
- if (*total & FIF_ALLMULTI)
- /*
- * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
- * all multicast frames
- */
- wl->rx_config &= ~CFG_MC_FILTER_EN;
- if (*total & FIF_FCSFAIL)
- wl->rx_filter |= CFG_RX_FCS_ERROR;
- if (*total & FIF_BCN_PRBRESP_PROMISC) {
- wl->rx_config &= ~CFG_BSSID_FILTER_EN;
- wl->rx_config &= ~CFG_SSID_FILTER_EN;
- }
- if (*total & FIF_CONTROL)
- wl->rx_filter |= CFG_RX_CTL_EN;
- if (*total & FIF_OTHER_BSS)
- wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
-
- /*
- * FIXME: workqueues need to be properly cancelled on stop(), for
- * now let's just disable changing the filter settings. They will
- * be updated any on config().
- */
- /* schedule_work(&wl->filter_work); */
-}
-
-/* HW encryption */
-static int wl12xx_set_key_type(struct wl12xx *wl, struct acx_set_key *key,
- enum set_key_cmd cmd,
- struct ieee80211_key_conf *mac80211_key,
- const u8 *addr)
-{
- switch (mac80211_key->alg) {
- case ALG_WEP:
- if (is_broadcast_ether_addr(addr))
- key->key_type = KEY_WEP_DEFAULT;
- else
- key->key_type = KEY_WEP_ADDR;
-
- mac80211_key->hw_key_idx = mac80211_key->keyidx;
- break;
- case ALG_TKIP:
- if (is_broadcast_ether_addr(addr))
- key->key_type = KEY_TKIP_MIC_GROUP;
- else
- key->key_type = KEY_TKIP_MIC_PAIRWISE;
-
- mac80211_key->hw_key_idx = mac80211_key->keyidx;
- break;
- case ALG_CCMP:
- if (is_broadcast_ether_addr(addr))
- key->key_type = KEY_AES_GROUP;
- else
- key->key_type = KEY_AES_PAIRWISE;
- mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- break;
- default:
- wl12xx_error("Unknown key algo 0x%x", mac80211_key->alg);
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
-static int wl12xx_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct wl12xx *wl = hw->priv;
- struct acx_set_key wl_key;
- const u8 *addr;
- int ret;
-
- static const u8 bcast_addr[ETH_ALEN] =
- { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 set key");
-
- memset(&wl_key, 0, sizeof(wl_key));
-
- addr = sta ? sta->addr : bcast_addr;
-
- wl12xx_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
- wl12xx_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
- wl12xx_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
- key->alg, key->keyidx, key->keylen, key->flags);
- wl12xx_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
-
- mutex_lock(&wl->mutex);
-
- switch (cmd) {
- case SET_KEY:
- wl_key.key_action = KEY_ADD_OR_REPLACE;
- break;
- case DISABLE_KEY:
- wl_key.key_action = KEY_REMOVE;
- break;
- default:
- wl12xx_error("Unsupported key cmd 0x%x", cmd);
- break;
- }
-
- ret = wl12xx_set_key_type(wl, &wl_key, cmd, key, addr);
- if (ret < 0) {
- wl12xx_error("Set KEY type failed");
- goto out;
- }
-
- if (wl_key.key_type != KEY_WEP_DEFAULT)
- memcpy(wl_key.addr, addr, ETH_ALEN);
-
- if ((wl_key.key_type == KEY_TKIP_MIC_GROUP) ||
- (wl_key.key_type == KEY_TKIP_MIC_PAIRWISE)) {
- /*
- * We get the key in the following form:
- * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
- * but the target is expecting:
- * TKIP - RX MIC - TX MIC
- */
- memcpy(wl_key.key, key->key, 16);
- memcpy(wl_key.key + 16, key->key + 24, 8);
- memcpy(wl_key.key + 24, key->key + 16, 8);
-
- } else {
- memcpy(wl_key.key, key->key, key->keylen);
- }
- wl_key.key_size = key->keylen;
-
- wl_key.id = key->keyidx;
- wl_key.ssid_profile = 0;
-
- wl12xx_dump(DEBUG_CRYPT, "TARGET KEY: ", &wl_key, sizeof(wl_key));
-
- if (wl12xx_cmd_send(wl, CMD_SET_KEYS, &wl_key, sizeof(wl_key)) < 0) {
- wl12xx_error("Set KEY failed");
- ret = -EOPNOTSUPP;
- goto out;
- }
-
-out:
- mutex_unlock(&wl->mutex);
- return ret;
-}
-
-static int wl12xx_build_basic_rates(char *rates)
-{
- u8 index = 0;
-
- rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
- rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
- rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
- rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-
- return index;
-}
-
-static int wl12xx_build_extended_rates(char *rates)
-{
- u8 index = 0;
-
- rates[index++] = IEEE80211_OFDM_RATE_6MB;
- rates[index++] = IEEE80211_OFDM_RATE_9MB;
- rates[index++] = IEEE80211_OFDM_RATE_12MB;
- rates[index++] = IEEE80211_OFDM_RATE_18MB;
- rates[index++] = IEEE80211_OFDM_RATE_24MB;
- rates[index++] = IEEE80211_OFDM_RATE_36MB;
- rates[index++] = IEEE80211_OFDM_RATE_48MB;
- rates[index++] = IEEE80211_OFDM_RATE_54MB;
-
- return index;
-}
-
-
-static int wl12xx_build_probe_req(struct wl12xx *wl, u8 *ssid, size_t ssid_len)
-{
- struct wl12xx_probe_req_template template;
- struct wl12xx_ie_rates *rates;
- char *ptr;
- u16 size;
-
- ptr = (char *)&template;
- size = sizeof(struct ieee80211_header);
-
- memset(template.header.da, 0xff, ETH_ALEN);
- memset(template.header.bssid, 0xff, ETH_ALEN);
- memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
- template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-
- /* IEs */
- /* SSID */
- template.ssid.header.id = WLAN_EID_SSID;
- template.ssid.header.len = ssid_len;
- if (ssid_len && ssid)
- memcpy(template.ssid.ssid, ssid, ssid_len);
- size += sizeof(struct wl12xx_ie_header) + ssid_len;
- ptr += size;
-
- /* Basic Rates */
- rates = (struct wl12xx_ie_rates *)ptr;
- rates->header.id = WLAN_EID_SUPP_RATES;
- rates->header.len = wl12xx_build_basic_rates(rates->rates);
- size += sizeof(struct wl12xx_ie_header) + rates->header.len;
- ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
-
- /* Extended rates */
- rates = (struct wl12xx_ie_rates *)ptr;
- rates->header.id = WLAN_EID_EXT_SUPP_RATES;
- rates->header.len = wl12xx_build_extended_rates(rates->rates);
- size += sizeof(struct wl12xx_ie_header) + rates->header.len;
-
- wl12xx_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
-
- return wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, &template,
- size);
-}
-
-static int wl12xx_hw_scan(struct wl12xx *wl, u8 *ssid, size_t len,
- u8 active_scan, u8 high_prio, u8 num_channels,
- u8 probe_requests)
-{
- int i, ret;
- u32 split_scan = 0;
- u16 scan_options = 0;
- struct cmd_scan *params;
- struct wl12xx_command *cmd_answer;
-
- if (wl->scanning)
- return -EINVAL;
-
- params = kzalloc(sizeof(*params), GFP_KERNEL);
- if (!params)
- return -ENOMEM;
-
- params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
- params->params.rx_filter_options =
- cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
-
- /* High priority scan */
- if (!active_scan)
- scan_options |= SCAN_PASSIVE;
- if (high_prio)
- scan_options |= SCAN_PRIORITY_HIGH;
- params->params.scan_options = scan_options;
-
- params->params.num_channels = num_channels;
- params->params.num_probe_requests = probe_requests;
- params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
- params->params.tid_trigger = 0;
-
- for (i = 0; i < num_channels; i++) {
- params->channels[i].min_duration = cpu_to_le32(30000);
- params->channels[i].max_duration = cpu_to_le32(60000);
- memset(¶ms->channels[i].bssid_lsb, 0xff, 4);
- memset(¶ms->channels[i].bssid_msb, 0xff, 2);
- params->channels[i].early_termination = 0;
- params->channels[i].tx_power_att = 0;
- params->channels[i].channel = i + 1;
- memset(params->channels[i].pad, 0, 3);
- }
-
- for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
- memset(¶ms->channels[i], 0,
- sizeof(struct basic_scan_channel_parameters));
-
- if (len && ssid) {
- params->params.ssid_len = len;
- memcpy(params->params.ssid, ssid, len);
- } else {
- params->params.ssid_len = 0;
- memset(params->params.ssid, 0, 32);
- }
-
- ret = wl12xx_build_probe_req(wl, ssid, len);
- if (ret < 0) {
- wl12xx_error("PROBE request template failed");
- goto out;
- }
-
- ret = wl12xx_cmd_send(wl, CMD_TRIGGER_SCAN_TO, &split_scan,
- sizeof(u32));
- if (ret < 0) {
- wl12xx_error("Split SCAN failed");
- goto out;
- }
-
- wl12xx_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
-
- wl->scanning = true;
-
- ret = wl12xx_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
- if (ret < 0)
- wl12xx_error("SCAN failed");
-
- wl12xx_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
-
- cmd_answer = (struct wl12xx_command *) params;
- if (cmd_answer->status != CMD_STATUS_SUCCESS) {
- wl12xx_error("TEST command answer error: %d",
- cmd_answer->status);
- wl->scanning = false;
- ret = -EIO;
- goto out;
- }
-
-out:
- kfree(params);
- return ret;
-
-}
-
-static int wl12xx_op_hw_scan(struct ieee80211_hw *hw,
- struct cfg80211_scan_request *req)
-{
- struct wl12xx *wl = hw->priv;
- int ret;
- u8 *ssid = NULL;
- size_t ssid_len = 0;
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 hw scan");
-
- if (req->n_ssids) {
- ssid = req->ssids[0].ssid;
- ssid_len = req->ssids[0].ssid_len;
- }
-
- mutex_lock(&wl->mutex);
- ret = wl12xx_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
- mutex_unlock(&wl->mutex);
-
- return ret;
-}
-
-static int wl12xx_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct wl12xx *wl = hw->priv;
- int ret;
-
- ret = wl12xx_acx_rts_threshold(wl, (u16) value);
-
- if (ret < 0)
- wl12xx_warning("wl12xx_op_set_rts_threshold failed: %d", ret);
-
- return ret;
-}
-
-static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changed)
-{
- enum acx_ps_mode mode;
- struct wl12xx *wl = hw->priv;
- struct sk_buff *beacon;
- int ret;
-
- wl12xx_debug(DEBUG_MAC80211, "mac80211 bss info changed");
-
- mutex_lock(&wl->mutex);
-
- if (changed & BSS_CHANGED_ASSOC) {
- if (bss_conf->assoc) {
- wl->aid = bss_conf->aid;
-
- ret = wl12xx_build_ps_poll(wl, wl->aid);
- if (ret < 0)
- goto out;
-
- ret = wl12xx_acx_aid(wl, wl->aid);
- if (ret < 0)
- goto out;
-
- /* If we want to go in PSM but we're not there yet */
- if (wl->psm_requested && !wl->psm) {
- mode = STATION_POWER_SAVE_MODE;
- ret = wl12xx_ps_set_mode(wl, mode);
- if (ret < 0)
- goto out;
- }
- }
- }
- if (changed & BSS_CHANGED_ERP_SLOT) {
- if (bss_conf->use_short_slot)
- ret = wl12xx_acx_slot(wl, SLOT_TIME_SHORT);
- else
- ret = wl12xx_acx_slot(wl, SLOT_TIME_LONG);
- if (ret < 0) {
- wl12xx_warning("Set slot time failed %d", ret);
- goto out;
- }
- }
-
- if (changed & BSS_CHANGED_ERP_PREAMBLE) {
- if (bss_conf->use_short_preamble)
- wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
- else
- wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
- }
-
- if (changed & BSS_CHANGED_ERP_CTS_PROT) {
- if (bss_conf->use_cts_prot)
- ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_ENABLE);
- else
- ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_DISABLE);
- if (ret < 0) {
- wl12xx_warning("Set ctsprotect failed %d", ret);
- goto out;
- }
- }
-
- if (changed & BSS_CHANGED_BSSID) {
- memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
-
- ret = wl12xx_build_null_data(wl);
- if (ret < 0)
- goto out;
-
- if (wl->bss_type != BSS_TYPE_IBSS) {
- ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1);
- if (ret < 0)
- goto out;
- }
- }
-
- if (changed & BSS_CHANGED_BEACON) {
- beacon = ieee80211_beacon_get(hw, vif);
- ret = wl12xx_cmd_template_set(wl, CMD_BEACON, beacon->data,
- beacon->len);
-
- if (ret < 0) {
- dev_kfree_skb(beacon);
- goto out;
- }
-
- ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
- beacon->len);
-
- dev_kfree_skb(beacon);
-
- if (ret < 0)
- goto out;
-
- ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
-
- if (ret < 0)
- goto out;
- }
-
-out:
- mutex_unlock(&wl->mutex);
-}
-
-
-/* can't be const, mac80211 writes to this */
-static struct ieee80211_rate wl12xx_rates[] = {
- { .bitrate = 10,
- .hw_value = 0x1,
- .hw_value_short = 0x1, },
- { .bitrate = 20,
- .hw_value = 0x2,
- .hw_value_short = 0x2,
- .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 55,
- .hw_value = 0x4,
- .hw_value_short = 0x4,
- .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 110,
- .hw_value = 0x20,
- .hw_value_short = 0x20,
- .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 60,
- .hw_value = 0x8,
- .hw_value_short = 0x8, },
- { .bitrate = 90,
- .hw_value = 0x10,
- .hw_value_short = 0x10, },
- { .bitrate = 120,
- .hw_value = 0x40,
- .hw_value_short = 0x40, },
- { .bitrate = 180,
- .hw_value = 0x80,
- .hw_value_short = 0x80, },
- { .bitrate = 240,
- .hw_value = 0x200,
- .hw_value_short = 0x200, },
- { .bitrate = 360,
- .hw_value = 0x400,
- .hw_value_short = 0x400, },
- { .bitrate = 480,
- .hw_value = 0x800,
- .hw_value_short = 0x800, },
- { .bitrate = 540,
- .hw_value = 0x1000,
- .hw_value_short = 0x1000, },
-};
-
-/* can't be const, mac80211 writes to this */
-static struct ieee80211_channel wl12xx_channels[] = {
- { .hw_value = 1, .center_freq = 2412},
- { .hw_value = 2, .center_freq = 2417},
- { .hw_value = 3, .center_freq = 2422},
- { .hw_value = 4, .center_freq = 2427},
- { .hw_value = 5, .center_freq = 2432},
- { .hw_value = 6, .center_freq = 2437},
- { .hw_value = 7, .center_freq = 2442},
- { .hw_value = 8, .center_freq = 2447},
- { .hw_value = 9, .center_freq = 2452},
- { .hw_value = 10, .center_freq = 2457},
- { .hw_value = 11, .center_freq = 2462},
- { .hw_value = 12, .center_freq = 2467},
- { .hw_value = 13, .center_freq = 2472},
-};
-
-/* can't be const, mac80211 writes to this */
-static struct ieee80211_supported_band wl12xx_band_2ghz = {
- .channels = wl12xx_channels,
- .n_channels = ARRAY_SIZE(wl12xx_channels),
- .bitrates = wl12xx_rates,
- .n_bitrates = ARRAY_SIZE(wl12xx_rates),
-};
-
-static const struct ieee80211_ops wl12xx_ops = {
- .start = wl12xx_op_start,
- .stop = wl12xx_op_stop,
- .add_interface = wl12xx_op_add_interface,
- .remove_interface = wl12xx_op_remove_interface,
- .config = wl12xx_op_config,
- .configure_filter = wl12xx_op_configure_filter,
- .tx = wl12xx_op_tx,
- .set_key = wl12xx_op_set_key,
- .hw_scan = wl12xx_op_hw_scan,
- .bss_info_changed = wl12xx_op_bss_info_changed,
- .set_rts_threshold = wl12xx_op_set_rts_threshold,
-};
-
-static int wl12xx_register_hw(struct wl12xx *wl)
-{
- int ret;
-
- if (wl->mac80211_registered)
- return 0;
-
- SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
-
- ret = ieee80211_register_hw(wl->hw);
- if (ret < 0) {
- wl12xx_error("unable to register mac80211 hw: %d", ret);
- return ret;
- }
-
- wl->mac80211_registered = true;
-
- wl12xx_notice("loaded");
-
- return 0;
-}
-
-static int wl12xx_init_ieee80211(struct wl12xx *wl)
-{
- /* The tx descriptor buffer and the TKIP space */
- wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
- + WL12XX_TKIP_IV_SPACE;
-
- /* unit us */
- /* FIXME: find a proper value */
- wl->hw->channel_change_time = 10000;
-
- wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_NOISE_DBM;
-
- wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
- wl->hw->wiphy->max_scan_ssids = 1;
- wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl12xx_band_2ghz;
-
- SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
-
- return 0;
-}
-
-#define WL12XX_DEFAULT_CHANNEL 1
-static int __devinit wl12xx_probe(struct spi_device *spi)
-{
- struct wl12xx_platform_data *pdata;
- struct ieee80211_hw *hw;
- struct wl12xx *wl;
- int ret, i;
- static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
-
- pdata = spi->dev.platform_data;
- if (!pdata) {
- wl12xx_error("no platform data");
- return -ENODEV;
- }
-
- hw = ieee80211_alloc_hw(sizeof(*wl), &wl12xx_ops);
- if (!hw) {
- wl12xx_error("could not alloc ieee80211_hw");
- return -ENOMEM;
- }
-
- wl = hw->priv;
- memset(wl, 0, sizeof(*wl));
-
- wl->hw = hw;
- dev_set_drvdata(&spi->dev, wl);
- wl->spi = spi;
-
- wl->data_in_count = 0;
-
- skb_queue_head_init(&wl->tx_queue);
-
- INIT_WORK(&wl->tx_work, wl12xx_tx_work);
- INIT_WORK(&wl->filter_work, wl12xx_filter_work);
- wl->channel = WL12XX_DEFAULT_CHANNEL;
- wl->scanning = false;
- wl->default_key = 0;
- wl->listen_int = 1;
- wl->rx_counter = 0;
- wl->rx_handled = 0;
- wl->rx_current_buffer = 0;
- wl->rx_last_id = 0;
- wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
- wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
- wl->elp = false;
- wl->psm = 0;
- wl->psm_requested = false;
- wl->tx_queue_stopped = false;
- wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
-
- /* We use the default power on sleep time until we know which chip
- * we're using */
- wl->chip.power_on_sleep = WL12XX_DEFAULT_POWER_ON_SLEEP;
-
- for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
- wl->tx_frames[i] = NULL;
-
- wl->next_tx_complete = 0;
-
- /*
- * In case our MAC address is not correctly set,
- * we use a random but Nokia MAC.
- */
- memcpy(wl->mac_addr, nokia_oui, 3);
- get_random_bytes(wl->mac_addr + 3, 3);
-
- wl->state = WL12XX_STATE_OFF;
- mutex_init(&wl->mutex);
-
- wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
- wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
-
- /* This is the only SPI value that we need to set here, the rest
- * comes from the board-peripherals file */
- spi->bits_per_word = 32;
-
- ret = spi_setup(spi);
- if (ret < 0) {
- wl12xx_error("spi_setup failed");
- goto out_free;
- }
-
- wl->set_power = pdata->set_power;
- if (!wl->set_power) {
- wl12xx_error("set power function missing in platform data");
- return -ENODEV;
- }
-
- wl->irq = spi->irq;
- if (wl->irq < 0) {
- wl12xx_error("irq missing in platform data");
- return -ENODEV;
- }
-
- ret = request_irq(wl->irq, wl12xx_irq, 0, DRIVER_NAME, wl);
- if (ret < 0) {
- wl12xx_error("request_irq() failed: %d", ret);
- goto out_free;
- }
-
- set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
-
- disable_irq(wl->irq);
-
- ret = wl12xx_init_ieee80211(wl);
- if (ret)
- goto out_irq;
-
- ret = wl12xx_register_hw(wl);
- if (ret)
- goto out_irq;
-
- wl12xx_debugfs_init(wl);
-
- wl12xx_notice("initialized");
-
- return 0;
-
- out_irq:
- free_irq(wl->irq, wl);
-
- out_free:
- ieee80211_free_hw(hw);
-
- return ret;
-}
-
-static int __devexit wl12xx_remove(struct spi_device *spi)
-{
- struct wl12xx *wl = dev_get_drvdata(&spi->dev);
-
- ieee80211_unregister_hw(wl->hw);
-
- wl12xx_debugfs_exit(wl);
-
- free_irq(wl->irq, wl);
- kfree(wl->target_mem_map);
- kfree(wl->data_path);
- kfree(wl->fw);
- wl->fw = NULL;
- kfree(wl->nvs);
- wl->nvs = NULL;
- ieee80211_free_hw(wl->hw);
-
- return 0;
-}
-
-
-static struct spi_driver wl12xx_spi_driver = {
- .driver = {
- .name = "wl12xx",
- .bus = &spi_bus_type,
- .owner = THIS_MODULE,
- },
-
- .probe = wl12xx_probe,
- .remove = __devexit_p(wl12xx_remove),
-};
-
-static int __init wl12xx_init(void)
-{
- int ret;
-
- ret = spi_register_driver(&wl12xx_spi_driver);
- if (ret < 0) {
- wl12xx_error("failed to register spi driver: %d", ret);
- goto out;
- }
-
-out:
- return ret;
-}
-
-static void __exit wl12xx_exit(void)
-{
- spi_unregister_driver(&wl12xx_spi_driver);
-
- wl12xx_notice("unloaded");
-}
-
-module_init(wl12xx_init);
-module_exit(wl12xx_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>, "
- "Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
deleted file mode 100644
index 83a1011..0000000
--- a/drivers/net/wireless/wl12xx/ps.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "reg.h"
-#include "ps.h"
-#include "spi.h"
-
-#define WL12XX_WAKEUP_TIMEOUT 2000
-
-/* Routines to toggle sleep mode while in ELP */
-void wl12xx_ps_elp_sleep(struct wl12xx *wl)
-{
- if (wl->elp || !wl->psm)
- return;
-
- wl12xx_debug(DEBUG_PSM, "chip to elp");
-
- wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
-
- wl->elp = true;
-}
-
-int wl12xx_ps_elp_wakeup(struct wl12xx *wl)
-{
- unsigned long timeout;
- u32 elp_reg;
-
- if (!wl->elp)
- return 0;
-
- wl12xx_debug(DEBUG_PSM, "waking up chip from elp");
-
- timeout = jiffies + msecs_to_jiffies(WL12XX_WAKEUP_TIMEOUT);
-
- wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
-
- elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
-
- /*
- * FIXME: we should wait for irq from chip but, as a temporary
- * solution to simplify locking, let's poll instead
- */
- while (!(elp_reg & ELPCTRL_WLAN_READY)) {
- if (time_after(jiffies, timeout)) {
- wl12xx_error("elp wakeup timeout");
- return -ETIMEDOUT;
- }
- msleep(1);
- elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
- }
-
- wl12xx_debug(DEBUG_PSM, "wakeup time: %u ms",
- jiffies_to_msecs(jiffies) -
- (jiffies_to_msecs(timeout) - WL12XX_WAKEUP_TIMEOUT));
-
- wl->elp = false;
-
- return 0;
-}
-
-static int wl12xx_ps_set_elp(struct wl12xx *wl, bool enable)
-{
- int ret;
-
- if (enable) {
- wl12xx_debug(DEBUG_PSM, "sleep auth psm/elp");
-
- /*
- * FIXME: we should PSM_ELP, but because of firmware wakeup
- * problems let's use only PSM_PS
- */
- ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_PS);
- if (ret < 0)
- return ret;
-
- wl12xx_ps_elp_sleep(wl);
- } else {
- wl12xx_debug(DEBUG_PSM, "sleep auth cam");
-
- /*
- * When the target is in ELP, we can only
- * access the ELP control register. Thus,
- * we have to wake the target up before
- * changing the power authorization.
- */
-
- wl12xx_ps_elp_wakeup(wl);
-
- ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode)
-{
- int ret;
-
- switch (mode) {
- case STATION_POWER_SAVE_MODE:
- wl12xx_debug(DEBUG_PSM, "entering psm");
- ret = wl12xx_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_ps_set_elp(wl, true);
- if (ret < 0)
- return ret;
-
- wl->psm = 1;
- break;
- case STATION_ACTIVE_MODE:
- default:
- wl12xx_debug(DEBUG_PSM, "leaving psm");
- ret = wl12xx_ps_set_elp(wl, false);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
- if (ret < 0)
- return ret;
-
- wl->psm = 0;
- break;
- }
-
- return ret;
-}
-
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
deleted file mode 100644
index 5d7c525..0000000
--- a/drivers/net/wireless/wl12xx/ps.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __WL12XX_PS_H__
-#define __WL12XX_PS_H__
-
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "wl12xx.h"
-#include "acx.h"
-
-int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode);
-void wl12xx_ps_elp_sleep(struct wl12xx *wl);
-int wl12xx_ps_elp_wakeup(struct wl12xx *wl);
-
-
-#endif /* __WL12XX_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
deleted file mode 100644
index e421643..0000000
--- a/drivers/net/wireless/wl12xx/reg.h
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __REG_H__
-#define __REG_H__
-
-#include <linux/bitops.h>
-#include "wl12xx.h"
-
-#define REGISTERS_BASE 0x00300000
-#define DRPW_BASE 0x00310000
-
-#define REGISTERS_DOWN_SIZE 0x00008800
-#define REGISTERS_WORK_SIZE 0x0000b000
-
-#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC
-
-/* ELP register commands */
-#define ELPCTRL_WAKE_UP 0x1
-#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
-#define ELPCTRL_SLEEP 0x0
-/* ELP WLAN_READY bit */
-#define ELPCTRL_WLAN_READY 0x2
-
-/*
- * Interrupt registers.
- * 64 bit interrupt sources registers ws ced.
- * sme interupts were removed and new ones were added.
- * Order was changed.
- */
-#define FIQ_MASK (REGISTERS_BASE + 0x0400)
-#define FIQ_MASK_L (REGISTERS_BASE + 0x0400)
-#define FIQ_MASK_H (REGISTERS_BASE + 0x0404)
-#define FIQ_MASK_SET (REGISTERS_BASE + 0x0408)
-#define FIQ_MASK_SET_L (REGISTERS_BASE + 0x0408)
-#define FIQ_MASK_SET_H (REGISTERS_BASE + 0x040C)
-#define FIQ_MASK_CLR (REGISTERS_BASE + 0x0410)
-#define FIQ_MASK_CLR_L (REGISTERS_BASE + 0x0410)
-#define FIQ_MASK_CLR_H (REGISTERS_BASE + 0x0414)
-#define IRQ_MASK (REGISTERS_BASE + 0x0418)
-#define IRQ_MASK_L (REGISTERS_BASE + 0x0418)
-#define IRQ_MASK_H (REGISTERS_BASE + 0x041C)
-#define IRQ_MASK_SET (REGISTERS_BASE + 0x0420)
-#define IRQ_MASK_SET_L (REGISTERS_BASE + 0x0420)
-#define IRQ_MASK_SET_H (REGISTERS_BASE + 0x0424)
-#define IRQ_MASK_CLR (REGISTERS_BASE + 0x0428)
-#define IRQ_MASK_CLR_L (REGISTERS_BASE + 0x0428)
-#define IRQ_MASK_CLR_H (REGISTERS_BASE + 0x042C)
-#define ECPU_MASK (REGISTERS_BASE + 0x0448)
-#define FIQ_STS_L (REGISTERS_BASE + 0x044C)
-#define FIQ_STS_H (REGISTERS_BASE + 0x0450)
-#define IRQ_STS_L (REGISTERS_BASE + 0x0454)
-#define IRQ_STS_H (REGISTERS_BASE + 0x0458)
-#define INT_STS_ND (REGISTERS_BASE + 0x0464)
-#define INT_STS_RAW_L (REGISTERS_BASE + 0x0464)
-#define INT_STS_RAW_H (REGISTERS_BASE + 0x0468)
-#define INT_STS_CLR (REGISTERS_BASE + 0x04B4)
-#define INT_STS_CLR_L (REGISTERS_BASE + 0x04B4)
-#define INT_STS_CLR_H (REGISTERS_BASE + 0x04B8)
-#define INT_ACK (REGISTERS_BASE + 0x046C)
-#define INT_ACK_L (REGISTERS_BASE + 0x046C)
-#define INT_ACK_H (REGISTERS_BASE + 0x0470)
-#define INT_TRIG (REGISTERS_BASE + 0x0474)
-#define INT_TRIG_L (REGISTERS_BASE + 0x0474)
-#define INT_TRIG_H (REGISTERS_BASE + 0x0478)
-#define HOST_STS_L (REGISTERS_BASE + 0x045C)
-#define HOST_STS_H (REGISTERS_BASE + 0x0460)
-#define HOST_MASK (REGISTERS_BASE + 0x0430)
-#define HOST_MASK_L (REGISTERS_BASE + 0x0430)
-#define HOST_MASK_H (REGISTERS_BASE + 0x0434)
-#define HOST_MASK_SET (REGISTERS_BASE + 0x0438)
-#define HOST_MASK_SET_L (REGISTERS_BASE + 0x0438)
-#define HOST_MASK_SET_H (REGISTERS_BASE + 0x043C)
-#define HOST_MASK_CLR (REGISTERS_BASE + 0x0440)
-#define HOST_MASK_CLR_L (REGISTERS_BASE + 0x0440)
-#define HOST_MASK_CLR_H (REGISTERS_BASE + 0x0444)
-
-/* Host Interrupts*/
-#define HINT_MASK (REGISTERS_BASE + 0x0494)
-#define HINT_MASK_SET (REGISTERS_BASE + 0x0498)
-#define HINT_MASK_CLR (REGISTERS_BASE + 0x049C)
-#define HINT_STS_ND_MASKED (REGISTERS_BASE + 0x04A0)
-/*1150 spec calls this HINT_STS_RAW*/
-#define HINT_STS_ND (REGISTERS_BASE + 0x04B0)
-#define HINT_STS_CLR (REGISTERS_BASE + 0x04A4)
-#define HINT_ACK (REGISTERS_BASE + 0x04A8)
-#define HINT_TRIG (REGISTERS_BASE + 0x04AC)
-
-/* Device Configuration registers*/
-#define SOR_CFG (REGISTERS_BASE + 0x0800)
-#define ECPU_CTRL (REGISTERS_BASE + 0x0804)
-#define HI_CFG (REGISTERS_BASE + 0x0808)
-#define EE_START (REGISTERS_BASE + 0x080C)
-
-#define CHIP_ID_B (REGISTERS_BASE + 0x5674)
-
-#define CHIP_ID_1251_PG10 (0x7010101)
-#define CHIP_ID_1251_PG11 (0x7020101)
-#define CHIP_ID_1251_PG12 (0x7030101)
-
-#define ENABLE (REGISTERS_BASE + 0x5450)
-
-/* Power Management registers */
-#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
-#define ELP_CMD (REGISTERS_BASE + 0x5808)
-#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
-#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
-#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
-
-#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
-
-/* Scratch Pad registers*/
-#define SCR_PAD0 (REGISTERS_BASE + 0x5608)
-#define SCR_PAD1 (REGISTERS_BASE + 0x560C)
-#define SCR_PAD2 (REGISTERS_BASE + 0x5610)
-#define SCR_PAD3 (REGISTERS_BASE + 0x5614)
-#define SCR_PAD4 (REGISTERS_BASE + 0x5618)
-#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
-#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
-#define SCR_PAD5 (REGISTERS_BASE + 0x5624)
-#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
-#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
-#define SCR_PAD6 (REGISTERS_BASE + 0x5630)
-#define SCR_PAD7 (REGISTERS_BASE + 0x5634)
-#define SCR_PAD8 (REGISTERS_BASE + 0x5638)
-#define SCR_PAD9 (REGISTERS_BASE + 0x563C)
-
-/* Spare registers*/
-#define SPARE_A1 (REGISTERS_BASE + 0x0994)
-#define SPARE_A2 (REGISTERS_BASE + 0x0998)
-#define SPARE_A3 (REGISTERS_BASE + 0x099C)
-#define SPARE_A4 (REGISTERS_BASE + 0x09A0)
-#define SPARE_A5 (REGISTERS_BASE + 0x09A4)
-#define SPARE_A6 (REGISTERS_BASE + 0x09A8)
-#define SPARE_A7 (REGISTERS_BASE + 0x09AC)
-#define SPARE_A8 (REGISTERS_BASE + 0x09B0)
-#define SPARE_B1 (REGISTERS_BASE + 0x5420)
-#define SPARE_B2 (REGISTERS_BASE + 0x5424)
-#define SPARE_B3 (REGISTERS_BASE + 0x5428)
-#define SPARE_B4 (REGISTERS_BASE + 0x542C)
-#define SPARE_B5 (REGISTERS_BASE + 0x5430)
-#define SPARE_B6 (REGISTERS_BASE + 0x5434)
-#define SPARE_B7 (REGISTERS_BASE + 0x5438)
-#define SPARE_B8 (REGISTERS_BASE + 0x543C)
-
-enum wl12xx_acx_int_reg {
- ACX_REG_INTERRUPT_TRIG,
- ACX_REG_INTERRUPT_TRIG_H,
-
-/*=============================================
- Host Interrupt Mask Register - 32bit (RW)
- ------------------------------------------
- Setting a bit in this register masks the
- corresponding interrupt to the host.
- 0 - RX0 - Rx first dubble buffer Data Interrupt
- 1 - TXD - Tx Data Interrupt
- 2 - TXXFR - Tx Transfer Interrupt
- 3 - RX1 - Rx second dubble buffer Data Interrupt
- 4 - RXXFR - Rx Transfer Interrupt
- 5 - EVENT_A - Event Mailbox interrupt
- 6 - EVENT_B - Event Mailbox interrupt
- 7 - WNONHST - Wake On Host Interrupt
- 8 - TRACE_A - Debug Trace interrupt
- 9 - TRACE_B - Debug Trace interrupt
- 10 - CDCMP - Command Complete Interrupt
- 11 -
- 12 -
- 13 -
- 14 - ICOMP - Initialization Complete Interrupt
- 16 - SG SE - Soft Gemini - Sense enable interrupt
- 17 - SG SD - Soft Gemini - Sense disable interrupt
- 18 - -
- 19 - -
- 20 - -
- 21- -
- Default: 0x0001
-*==============================================*/
- ACX_REG_INTERRUPT_MASK,
-
-/*=============================================
- Host Interrupt Mask Set 16bit, (Write only)
- ------------------------------------------
- Setting a bit in this register sets
- the corresponding bin in ACX_HINT_MASK register
- without effecting the mask
- state of other bits (0 = no effect).
-==============================================*/
- ACX_REG_HINT_MASK_SET,
-
-/*=============================================
- Host Interrupt Mask Clear 16bit,(Write only)
- ------------------------------------------
- Setting a bit in this register clears
- the corresponding bin in ACX_HINT_MASK register
- without effecting the mask
- state of other bits (0 = no effect).
-=============================================*/
- ACX_REG_HINT_MASK_CLR,
-
-/*=============================================
- Host Interrupt Status Nondestructive Read
- 16bit,(Read only)
- ------------------------------------------
- The host can read this register to determine
- which interrupts are active.
- Reading this register doesn't
- effect its content.
-=============================================*/
- ACX_REG_INTERRUPT_NO_CLEAR,
-
-/*=============================================
- Host Interrupt Status Clear on Read Register
- 16bit,(Read only)
- ------------------------------------------
- The host can read this register to determine
- which interrupts are active.
- Reading this register clears it,
- thus making all interrupts inactive.
-==============================================*/
- ACX_REG_INTERRUPT_CLEAR,
-
-/*=============================================
- Host Interrupt Acknowledge Register
- 16bit,(Write only)
- ------------------------------------------
- The host can set individual bits in this
- register to clear (acknowledge) the corresp.
- interrupt status bits in the HINT_STS_CLR and
- HINT_STS_ND registers, thus making the
- assotiated interrupt inactive. (0-no effect)
-==============================================*/
- ACX_REG_INTERRUPT_ACK,
-
-/*===============================================
- Host Software Reset - 32bit RW
- ------------------------------------------
- [31:1] Reserved
- 0 SOFT_RESET Soft Reset - When this bit is set,
- it holds the Wlan hardware in a soft reset state.
- This reset disables all MAC and baseband processor
- clocks except the CardBus/PCI interface clock.
- It also initializes all MAC state machines except
- the host interface. It does not reload the
- contents of the EEPROM. When this bit is cleared
- (not self-clearing), the Wlan hardware
- exits the software reset state.
-===============================================*/
- ACX_REG_SLV_SOFT_RESET,
-
-/*===============================================
- EEPROM Burst Read Start - 32bit RW
- ------------------------------------------
- [31:1] Reserved
- 0 ACX_EE_START - EEPROM Burst Read Start 0
- Setting this bit starts a burst read from
- the external EEPROM.
- If this bit is set (after reset) before an EEPROM read/write,
- the burst read starts at EEPROM address 0.
- Otherwise, it starts at the address
- following the address of the previous access.
- TheWlan hardware hardware clears this bit automatically.
-
- Default: 0x00000000
-*================================================*/
- ACX_REG_EE_START,
-
-/* Embedded ARM CPU Control */
-
-/*===============================================
- Halt eCPU - 32bit RW
- ------------------------------------------
- 0 HALT_ECPU Halt Embedded CPU - This bit is the
- compliment of bit 1 (MDATA2) in the SOR_CFG register.
- During a hardware reset, this bit holds
- the inverse of MDATA2.
- When downloading firmware from the host,
- set this bit (pull down MDATA2).
- The host clears this bit after downloading the firmware into
- zero-wait-state SSRAM.
- When loading firmware from Flash, clear this bit (pull up MDATA2)
- so that the eCPU can run the bootloader code in Flash
- HALT_ECPU eCPU State
- --------------------
- 1 halt eCPU
- 0 enable eCPU
- ===============================================*/
- ACX_REG_ECPU_CONTROL,
-
- ACX_REG_TABLE_LEN
-};
-
-#define ACX_SLV_SOFT_RESET_BIT BIT(1)
-#define ACX_REG_EEPROM_START_BIT BIT(1)
-
-/* Command/Information Mailbox Pointers */
-
-/*===============================================
- Command Mailbox Pointer - 32bit RW
- ------------------------------------------
- This register holds the start address of
- the command mailbox located in the Wlan hardware memory.
- The host must read this pointer after a reset to
- find the location of the command mailbox.
- The Wlan hardware initializes the command mailbox
- pointer with the default address of the command mailbox.
- The command mailbox pointer is not valid until after
- the host receives the Init Complete interrupt from
- the Wlan hardware.
- ===============================================*/
-#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0)
-
-/*===============================================
- Information Mailbox Pointer - 32bit RW
- ------------------------------------------
- This register holds the start address of
- the information mailbox located in the Wlan hardware memory.
- The host must read this pointer after a reset to find
- the location of the information mailbox.
- The Wlan hardware initializes the information mailbox pointer
- with the default address of the information mailbox.
- The information mailbox pointer is not valid
- until after the host receives the Init Complete interrupt from
- the Wlan hardware.
- ===============================================*/
-#define REG_EVENT_MAILBOX_PTR (SCR_PAD1)
-
-
-/* Misc */
-
-#define REG_ENABLE_TX_RX (ENABLE)
-/*
- * Rx configuration (filter) information element
- * ---------------------------------------------
- */
-#define REG_RX_CONFIG (RX_CFG)
-#define REG_RX_FILTER (RX_FILTER_CFG)
-
-
-#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002
-
-/* promiscuous - receives all valid frames */
-#define RX_CFG_PROMISCUOUS 0x0008
-
-/* receives frames from any BSSID */
-#define RX_CFG_BSSID 0x0020
-
-/* receives frames destined to any MAC address */
-#define RX_CFG_MAC 0x0010
-
-#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010
-#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000
-#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020
-#define RX_CFG_ENABLE_ANY_BSSID 0x0000
-
-/* discards all broadcast frames */
-#define RX_CFG_DISABLE_BCAST 0x0200
-
-#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400
-#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
-#define RX_CFG_COPY_RX_STATUS 0x2000
-#define RX_CFG_TSF 0x10000
-
-#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
- RX_CFG_ENABLE_ONLY_MY_BSSID)
-
-#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
- | RX_CFG_ENABLE_ANY_BSSID)
-
-#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
- RX_CFG_ENABLE_ANY_BSSID)
-
-#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
- | RX_CFG_ENABLE_ONLY_MY_BSSID)
-
-#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \
- | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
- | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
-
-#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
-
-#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \
- RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
-
-#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \
- RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
-
-#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
- | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
- | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
-
-#define RX_FILTER_OPTION_FILTER_ALL 0
-
-#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
- | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
-
-#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
- | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
- | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
- | CFG_RX_PRSP_EN)
-
-
-/*===============================================
- Phy regs
- ===============================================*/
-#define ACX_PHY_ADDR_REG SBB_ADDR
-#define ACX_PHY_DATA_REG SBB_DATA
-#define ACX_PHY_CTRL_REG SBB_CTL
-#define ACX_PHY_REG_WR_MASK 0x00000001ul
-#define ACX_PHY_REG_RD_MASK 0x00000002ul
-
-
-/*===============================================
- EEPROM Read/Write Request 32bit RW
- ------------------------------------------
- 1 EE_READ - EEPROM Read Request 1 - Setting this bit
- loads a single byte of data into the EE_DATA
- register from the EEPROM location specified in
- the EE_ADDR register.
- The Wlan hardware hardware clears this bit automatically.
- EE_DATA is valid when this bit is cleared.
-
- 0 EE_WRITE - EEPROM Write Request - Setting this bit
- writes a single byte of data from the EE_DATA register into the
- EEPROM location specified in the EE_ADDR register.
- The Wlan hardware hardware clears this bit automatically.
-*===============================================*/
-#define ACX_EE_CTL_REG EE_CTL
-#define EE_WRITE 0x00000001ul
-#define EE_READ 0x00000002ul
-
-/*===============================================
- EEPROM Address - 32bit RW
- ------------------------------------------
- This register specifies the address
- within the EEPROM from/to which to read/write data.
- ===============================================*/
-#define ACX_EE_ADDR_REG EE_ADDR
-
-/*===============================================
- EEPROM Data - 32bit RW
- ------------------------------------------
- This register either holds the read 8 bits of
- data from the EEPROM or the write data
- to be written to the EEPROM.
- ===============================================*/
-#define ACX_EE_DATA_REG EE_DATA
-
-/*===============================================
- EEPROM Base Address - 32bit RW
- ------------------------------------------
- This register holds the upper nine bits
- [23:15] of the 24-bit Wlan hardware memory
- address for burst reads from EEPROM accesses.
- The EEPROM provides the lower 15 bits of this address.
- The MSB of the address from the EEPROM is ignored.
- ===============================================*/
-#define ACX_EE_CFG EE_CFG
-
-/*===============================================
- GPIO Output Values -32bit, RW
- ------------------------------------------
- [31:16] Reserved
- [15: 0] Specify the output values (at the output driver inputs) for
- GPIO[15:0], respectively.
- ===============================================*/
-#define ACX_GPIO_OUT_REG GPIO_OUT
-#define ACX_MAX_GPIO_LINES 15
-
-/*===============================================
- Contention window -32bit, RW
- ------------------------------------------
- [31:26] Reserved
- [25:16] Max (0x3ff)
- [15:07] Reserved
- [06:00] Current contention window value - default is 0x1F
- ===============================================*/
-#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG
-#define ACX_CONT_WIND_MIN_MASK 0x0000007f
-#define ACX_CONT_WIND_MAX 0x03ff0000
-
-/*
- * Indirect slave register/memory registers
- * ----------------------------------------
- */
-#define HW_SLAVE_REG_ADDR_REG 0x00000004
-#define HW_SLAVE_REG_DATA_REG 0x00000008
-#define HW_SLAVE_REG_CTRL_REG 0x0000000c
-
-#define SLAVE_AUTO_INC 0x00010000
-#define SLAVE_NO_AUTO_INC 0x00000000
-#define SLAVE_HOST_LITTLE_ENDIAN 0x00000000
-
-#define HW_SLAVE_MEM_ADDR_REG SLV_MEM_ADDR
-#define HW_SLAVE_MEM_DATA_REG SLV_MEM_DATA
-#define HW_SLAVE_MEM_CTRL_REG SLV_MEM_CTL
-#define HW_SLAVE_MEM_ENDIAN_REG SLV_END_CTL
-
-#define HW_FUNC_EVENT_INT_EN 0x8000
-#define HW_FUNC_EVENT_MASK_REG 0x00000034
-
-#define ACX_MAC_TIMESTAMP_REG (MAC_TIMESTAMP)
-
-/*===============================================
- HI_CFG Interface Configuration Register Values
- ------------------------------------------
- ===============================================*/
-#define HI_CFG_UART_ENABLE 0x00000004
-#define HI_CFG_RST232_ENABLE 0x00000008
-#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
-#define HI_CFG_HOST_INT_ENABLE 0x00000020
-#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
-#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
-#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
-#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
-#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
-
-/*
- * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
- * for platforms using active high interrupt level
- */
-#ifdef USE_ACTIVE_HIGH
-#define HI_CFG_DEF_VAL \
- (HI_CFG_UART_ENABLE | \
- HI_CFG_RST232_ENABLE | \
- HI_CFG_CLOCK_REQ_SELECT | \
- HI_CFG_HOST_INT_ENABLE)
-#else
-#define HI_CFG_DEF_VAL \
- (HI_CFG_UART_ENABLE | \
- HI_CFG_RST232_ENABLE | \
- HI_CFG_CLOCK_REQ_SELECT | \
- HI_CFG_HOST_INT_ENABLE)
-
-#endif
-
-#define REF_FREQ_19_2 0
-#define REF_FREQ_26_0 1
-#define REF_FREQ_38_4 2
-#define REF_FREQ_40_0 3
-#define REF_FREQ_33_6 4
-#define REF_FREQ_NUM 5
-
-#define LUT_PARAM_INTEGER_DIVIDER 0
-#define LUT_PARAM_FRACTIONAL_DIVIDER 1
-#define LUT_PARAM_ATTN_BB 2
-#define LUT_PARAM_ALPHA_BB 3
-#define LUT_PARAM_STOP_TIME_BB 4
-#define LUT_PARAM_BB_PLL_LOOP_FILTER 5
-#define LUT_PARAM_NUM 6
-
-#define ACX_EEPROMLESS_IND_REG (SCR_PAD4)
-#define USE_EEPROM 0
-#define SOFT_RESET_MAX_TIME 1000000
-#define SOFT_RESET_STALL_TIME 1000
-#define NVS_DATA_BUNDARY_ALIGNMENT 4
-
-
-/* Firmware image load chunk size */
-#define CHUNK_SIZE 512
-
-/* Firmware image header size */
-#define FW_HDR_SIZE 8
-
-#define ECPU_CONTROL_HALT 0x00000101
-
-
-/******************************************************************************
-
- CHANNELS, BAND & REG DOMAINS definitions
-
-******************************************************************************/
-
-
-enum {
- RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */
- RADIO_BAND_5GHZ = 1, /* 5 Ghz band */
- RADIO_BAND_JAPAN_4_9_GHZ = 2,
- DEFAULT_BAND = RADIO_BAND_2_4GHZ,
- INVALID_BAND = 0xFE,
- MAX_RADIO_BANDS = 0xFF
-};
-
-enum {
- NO_RATE = 0,
- RATE_1MBPS = 0x0A,
- RATE_2MBPS = 0x14,
- RATE_5_5MBPS = 0x37,
- RATE_6MBPS = 0x0B,
- RATE_9MBPS = 0x0F,
- RATE_11MBPS = 0x6E,
- RATE_12MBPS = 0x0A,
- RATE_18MBPS = 0x0E,
- RATE_22MBPS = 0xDC,
- RATE_24MBPS = 0x09,
- RATE_36MBPS = 0x0D,
- RATE_48MBPS = 0x08,
- RATE_54MBPS = 0x0C
-};
-
-enum {
- RATE_INDEX_1MBPS = 0,
- RATE_INDEX_2MBPS = 1,
- RATE_INDEX_5_5MBPS = 2,
- RATE_INDEX_6MBPS = 3,
- RATE_INDEX_9MBPS = 4,
- RATE_INDEX_11MBPS = 5,
- RATE_INDEX_12MBPS = 6,
- RATE_INDEX_18MBPS = 7,
- RATE_INDEX_22MBPS = 8,
- RATE_INDEX_24MBPS = 9,
- RATE_INDEX_36MBPS = 10,
- RATE_INDEX_48MBPS = 11,
- RATE_INDEX_54MBPS = 12,
- RATE_INDEX_MAX = RATE_INDEX_54MBPS,
- MAX_RATE_INDEX,
- INVALID_RATE_INDEX = MAX_RATE_INDEX,
- RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
-};
-
-enum {
- RATE_MASK_1MBPS = 0x1,
- RATE_MASK_2MBPS = 0x2,
- RATE_MASK_5_5MBPS = 0x4,
- RATE_MASK_11MBPS = 0x20,
-};
-
-#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */
-#define OFDM_RATE_BIT BIT(6)
-#define PBCC_RATE_BIT BIT(7)
-
-enum {
- CCK_LONG = 0,
- CCK_SHORT = SHORT_PREAMBLE_BIT,
- PBCC_LONG = PBCC_RATE_BIT,
- PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
- OFDM = OFDM_RATE_BIT
-};
-
-/******************************************************************************
-
-Transmit-Descriptor RATE-SET field definitions...
-
-Define a new "Rate-Set" for TX path that incorporates the
-Rate & Modulation info into a single 16-bit field.
-
-TxdRateSet_t:
-b15 - Indicates Preamble type (1=SHORT, 0=LONG).
- Notes:
- Must be LONG (0) for 1Mbps rate.
- Does not apply (set to 0) for RevG-OFDM rates.
-b14 - Indicates PBCC encoding (1=PBCC, 0=not).
- Notes:
- Does not apply (set to 0) for rates 1 and 2 Mbps.
- Does not apply (set to 0) for RevG-OFDM rates.
-b13 - Unused (set to 0).
-b12-b0 - Supported Rate indicator bits as defined below.
-
-******************************************************************************/
-
-
-#define TNETW1251_CHIP_ID_PG1_0 0x07010101
-#define TNETW1251_CHIP_ID_PG1_1 0x07020101
-#define TNETW1251_CHIP_ID_PG1_2 0x07030101
-
-/*************************************************************************
-
- Interrupt Trigger Register (Host -> WiLink)
-
-**************************************************************************/
-
-/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
-
-/*
- * Host Command Interrupt. Setting this bit masks
- * the interrupt that the host issues to inform
- * the FW that it has sent a command
- * to the Wlan hardware Command Mailbox.
- */
-#define INTR_TRIG_CMD BIT(0)
-
-/*
- * Host Event Acknowlegde Interrupt. The host
- * sets this bit to acknowledge that it received
- * the unsolicited information from the event
- * mailbox.
- */
-#define INTR_TRIG_EVENT_ACK BIT(1)
-
-/*
- * The host sets this bit to inform the Wlan
- * FW that a TX packet is in the XFER
- * Buffer #0.
- */
-#define INTR_TRIG_TX_PROC0 BIT(2)
-
-/*
- * The host sets this bit to inform the FW
- * that it read a packet from RX XFER
- * Buffer #0.
- */
-#define INTR_TRIG_RX_PROC0 BIT(3)
-
-#define INTR_TRIG_DEBUG_ACK BIT(4)
-
-#define INTR_TRIG_STATE_CHANGED BIT(5)
-
-
-/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
-
-/*
- * The host sets this bit to inform the FW
- * that it read a packet from RX XFER
- * Buffer #1.
- */
-#define INTR_TRIG_RX_PROC1 BIT(17)
-
-/*
- * The host sets this bit to inform the Wlan
- * hardware that a TX packet is in the XFER
- * Buffer #1.
- */
-#define INTR_TRIG_TX_PROC1 BIT(18)
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
deleted file mode 100644
index 981ea25..0000000
--- a/drivers/net/wireless/wl12xx/rx.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/skbuff.h>
-#include <net/mac80211.h>
-
-#include "wl12xx.h"
-#include "reg.h"
-#include "spi.h"
-#include "rx.h"
-
-static void wl12xx_rx_header(struct wl12xx *wl,
- struct wl12xx_rx_descriptor *desc)
-{
- u32 rx_packet_ring_addr;
-
- rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
- if (wl->rx_current_buffer)
- rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
-
- wl12xx_spi_mem_read(wl, rx_packet_ring_addr, desc,
- sizeof(struct wl12xx_rx_descriptor));
-}
-
-static void wl12xx_rx_status(struct wl12xx *wl,
- struct wl12xx_rx_descriptor *desc,
- struct ieee80211_rx_status *status,
- u8 beacon)
-{
- memset(status, 0, sizeof(struct ieee80211_rx_status));
-
- status->band = IEEE80211_BAND_2GHZ;
- status->mactime = desc->timestamp;
-
- /*
- * The rx status timestamp is a 32 bits value while the TSF is a
- * 64 bits one.
- * For IBSS merging, TSF is mandatory, so we have to get it
- * somehow, so we ask for ACX_TSF_INFO.
- * That could be moved to the get_tsf() hook, but unfortunately,
- * this one must be atomic, while our SPI routines can sleep.
- */
- if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
- u64 mactime;
- int ret;
- struct wl12xx_command cmd;
- struct acx_tsf_info *tsf_info;
-
- memset(&cmd, 0, sizeof(cmd));
-
- ret = wl12xx_cmd_interrogate(wl, ACX_TSF_INFO,
- sizeof(struct acx_tsf_info),
- &cmd);
- if (ret < 0) {
- wl12xx_warning("ACX_FW_REV interrogate failed");
- return;
- }
-
- tsf_info = (struct acx_tsf_info *)&(cmd.parameters);
-
- mactime = tsf_info->current_tsf_lsb |
- (tsf_info->current_tsf_msb << 31);
-
- status->mactime = mactime;
- }
-
- status->signal = desc->rssi;
- status->qual = (desc->rssi - WL12XX_RX_MIN_RSSI) * 100 /
- (WL12XX_RX_MAX_RSSI - WL12XX_RX_MIN_RSSI);
- status->qual = min(status->qual, 100);
- status->qual = max(status->qual, 0);
-
- /*
- * FIXME: guessing that snr needs to be divided by two, otherwise
- * the values don't make any sense
- */
- status->noise = desc->rssi - desc->snr / 2;
-
- status->freq = ieee80211_channel_to_frequency(desc->channel);
-
- status->flag |= RX_FLAG_TSFT;
-
- if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
- status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
-
- if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
- status->flag |= RX_FLAG_DECRYPTED;
-
- if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
- status->flag |= RX_FLAG_MMIC_ERROR;
- }
-
- if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
- status->flag |= RX_FLAG_FAILED_FCS_CRC;
-
-
- /* FIXME: set status->rate_idx */
-}
-
-static void wl12xx_rx_body(struct wl12xx *wl,
- struct wl12xx_rx_descriptor *desc)
-{
- struct sk_buff *skb;
- struct ieee80211_rx_status status;
- u8 *rx_buffer, beacon = 0;
- u16 length, *fc;
- u32 curr_id, last_id_inc, rx_packet_ring_addr;
-
- length = WL12XX_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH);
- curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
- last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
-
- if (last_id_inc != curr_id) {
- wl12xx_warning("curr ID:%d, last ID inc:%d",
- curr_id, last_id_inc);
- wl->rx_last_id = curr_id;
- } else {
- wl->rx_last_id = last_id_inc;
- }
-
- rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
- sizeof(struct wl12xx_rx_descriptor) + 20;
- if (wl->rx_current_buffer)
- rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
-
- skb = dev_alloc_skb(length);
- if (!skb) {
- wl12xx_error("Couldn't allocate RX frame");
- return;
- }
-
- rx_buffer = skb_put(skb, length);
- wl12xx_spi_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
-
- /* The actual lenght doesn't include the target's alignment */
- skb->len = desc->length - PLCP_HEADER_LENGTH;
-
- fc = (u16 *)skb->data;
-
- if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
- beacon = 1;
-
- wl12xx_rx_status(wl, desc, &status, beacon);
-
- wl12xx_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
- beacon ? "beacon" : "");
-
- ieee80211_rx(wl->hw, skb, &status);
-}
-
-static void wl12xx_rx_ack(struct wl12xx *wl)
-{
- u32 data, addr;
-
- if (wl->rx_current_buffer) {
- addr = ACX_REG_INTERRUPT_TRIG_H;
- data = INTR_TRIG_RX_PROC1;
- } else {
- addr = ACX_REG_INTERRUPT_TRIG;
- data = INTR_TRIG_RX_PROC0;
- }
-
- wl12xx_reg_write32(wl, addr, data);
-
- /* Toggle buffer ring */
- wl->rx_current_buffer = !wl->rx_current_buffer;
-}
-
-
-void wl12xx_rx(struct wl12xx *wl)
-{
- struct wl12xx_rx_descriptor rx_desc;
-
- if (wl->state != WL12XX_STATE_ON)
- return;
-
- /* We first read the frame's header */
- wl12xx_rx_header(wl, &rx_desc);
-
- /* Now we can read the body */
- wl12xx_rx_body(wl, &rx_desc);
-
- /* Finally, we need to ACK the RX */
- wl12xx_rx_ack(wl);
-
- return;
-}
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h
deleted file mode 100644
index 8a23fde..0000000
--- a/drivers/net/wireless/wl12xx/rx.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_RX_H__
-#define __WL12XX_RX_H__
-
-#include <linux/bitops.h>
-
-/*
- * RX PATH
- *
- * The Rx path uses a double buffer and an rx_contro structure, each located
- * at a fixed address in the device memory. The host keeps track of which
- * buffer is available and alternates between them on a per packet basis.
- * The size of each of the two buffers is large enough to hold the longest
- * 802.3 packet.
- * The RX path goes like that:
- * 1) The target generates an interrupt each time a new packet is received.
- * There are 2 RX interrupts, one for each buffer.
- * 2) The host reads the received packet from one of the double buffers.
- * 3) The host triggers a target interrupt.
- * 4) The target prepares the next RX packet.
- */
-
-#define WL12XX_RX_MAX_RSSI -30
-#define WL12XX_RX_MIN_RSSI -95
-
-#define WL12XX_RX_ALIGN_TO 4
-#define WL12XX_RX_ALIGN(len) (((len) + WL12XX_RX_ALIGN_TO - 1) & \
- ~(WL12XX_RX_ALIGN_TO - 1))
-
-#define SHORT_PREAMBLE_BIT BIT(0)
-#define OFDM_RATE_BIT BIT(6)
-#define PBCC_RATE_BIT BIT(7)
-
-#define PLCP_HEADER_LENGTH 8
-#define RX_DESC_PACKETID_SHIFT 11
-#define RX_MAX_PACKET_ID 3
-
-#define RX_DESC_VALID_FCS 0x0001
-#define RX_DESC_MATCH_RXADDR1 0x0002
-#define RX_DESC_MCAST 0x0004
-#define RX_DESC_STAINTIM 0x0008
-#define RX_DESC_VIRTUAL_BM 0x0010
-#define RX_DESC_BCAST 0x0020
-#define RX_DESC_MATCH_SSID 0x0040
-#define RX_DESC_MATCH_BSSID 0x0080
-#define RX_DESC_ENCRYPTION_MASK 0x0300
-#define RX_DESC_MEASURMENT 0x0400
-#define RX_DESC_SEQNUM_MASK 0x1800
-#define RX_DESC_MIC_FAIL 0x2000
-#define RX_DESC_DECRYPT_FAIL 0x4000
-
-struct wl12xx_rx_descriptor {
- u32 timestamp; /* In microseconds */
- u16 length; /* Paylod length, including headers */
- u16 flags;
-
- /*
- * 0 - 802.11
- * 1 - 802.3
- * 2 - IP
- * 3 - Raw Codec
- */
- u8 type;
-
- /*
- * Recevied Rate:
- * 0x0A - 1MBPS
- * 0x14 - 2MBPS
- * 0x37 - 5_5MBPS
- * 0x0B - 6MBPS
- * 0x0F - 9MBPS
- * 0x6E - 11MBPS
- * 0x0A - 12MBPS
- * 0x0E - 18MBPS
- * 0xDC - 22MBPS
- * 0x09 - 24MBPS
- * 0x0D - 36MBPS
- * 0x08 - 48MBPS
- * 0x0C - 54MBPS
- */
- u8 rate;
-
- u8 mod_pre; /* Modulation and preamble */
- u8 channel;
-
- /*
- * 0 - 2.4 Ghz
- * 1 - 5 Ghz
- */
- u8 band;
-
- s8 rssi; /* in dB */
- u8 rcpi; /* in dB */
- u8 snr; /* in dB */
-} __attribute__ ((packed));
-
-void wl12xx_rx(struct wl12xx *wl);
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
deleted file mode 100644
index abdf171..0000000
--- a/drivers/net/wireless/wl12xx/spi.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/crc7.h>
-#include <linux/spi/spi.h>
-
-#include "wl12xx.h"
-#include "wl12xx_80211.h"
-#include "reg.h"
-#include "spi.h"
-#include "ps.h"
-
-static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr)
-{
- /* If the address is lower than REGISTERS_BASE, it means that this is
- * a chip-specific register address, so look it up in the registers
- * table */
- if (addr < REGISTERS_BASE) {
- /* Make sure we don't go over the table */
- if (addr >= ACX_REG_TABLE_LEN) {
- wl12xx_error("address out of range (%d)", addr);
- return -EINVAL;
- }
- addr = wl->chip.acx_reg_table[addr];
- }
-
- return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
-}
-
-static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr)
-{
- return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
-}
-
-
-void wl12xx_spi_reset(struct wl12xx *wl)
-{
- u8 *cmd;
- struct spi_transfer t;
- struct spi_message m;
-
- cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
- if (!cmd) {
- wl12xx_error("could not allocate cmd for spi reset");
- return;
- }
-
- memset(&t, 0, sizeof(t));
- spi_message_init(&m);
-
- memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
-
- t.tx_buf = cmd;
- t.len = WSPI_INIT_CMD_LEN;
- spi_message_add_tail(&t, &m);
-
- spi_sync(wl->spi, &m);
-
- wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
-}
-
-void wl12xx_spi_init(struct wl12xx *wl)
-{
- u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
- struct spi_transfer t;
- struct spi_message m;
-
- cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
- if (!cmd) {
- wl12xx_error("could not allocate cmd for spi init");
- return;
- }
-
- memset(crc, 0, sizeof(crc));
- memset(&t, 0, sizeof(t));
- spi_message_init(&m);
-
- /*
- * Set WSPI_INIT_COMMAND
- * the data is being send from the MSB to LSB
- */
- cmd[2] = 0xff;
- cmd[3] = 0xff;
- cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
- cmd[0] = 0;
- cmd[7] = 0;
- cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
- cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
-
- if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
- cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
- else
- cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
-
- cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
- | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
-
- crc[0] = cmd[1];
- crc[1] = cmd[0];
- crc[2] = cmd[7];
- crc[3] = cmd[6];
- crc[4] = cmd[5];
-
- cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
- cmd[4] |= WSPI_INIT_CMD_END;
-
- t.tx_buf = cmd;
- t.len = WSPI_INIT_CMD_LEN;
- spi_message_add_tail(&t, &m);
-
- spi_sync(wl->spi, &m);
-
- wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
-}
-
-/* Set the SPI partitions to access the chip addresses
- *
- * There are two VIRTUAL (SPI) partitions (the memory partition and the
- * registers partition), which are mapped to two different areas of the
- * PHYSICAL (hardware) memory. This function also makes other checks to
- * ensure that the partitions are not overlapping. In the diagram below, the
- * memory partition comes before the register partition, but the opposite is
- * also supported.
- *
- * PHYSICAL address
- * space
- *
- * | |
- * ...+----+--> mem_start
- * VIRTUAL address ... | |
- * space ... | | [PART_0]
- * ... | |
- * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
- * | | ... | |
- * |MEM | ... | |
- * | | ... | |
- * part_size <--+----+... | | {unused area)
- * | | ... | |
- * |REG | ... | |
- * part_size | | ... | |
- * + <--+----+... ...+----+--> reg_start
- * reg_size ... | |
- * ... | | [PART_1]
- * ... | |
- * ...+----+--> reg_start + reg_size
- * | |
- *
- */
-void wl12xx_set_partition(struct wl12xx *wl,
- u32 mem_start, u32 mem_size,
- u32 reg_start, u32 reg_size)
-{
- u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)];
- struct wl12xx_partition *partition;
- struct spi_transfer t;
- struct spi_message m;
- u32 *cmd;
- size_t len;
- int addr;
-
- spi_message_init(&m);
- memset(&t, 0, sizeof(t));
- memset(tx_buf, 0, sizeof(tx_buf));
-
- cmd = (u32 *) tx_buf;
- partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32));
- addr = HW_ACCESS_PART0_SIZE_ADDR;
- len = 2 * sizeof(struct wl12xx_partition);
-
- *cmd |= WSPI_CMD_WRITE;
- *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
- *cmd |= addr & WSPI_CMD_BYTE_ADDR;
-
- wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
-
- /* Make sure that the two partitions together don't exceed the
- * address range */
- if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
- wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
- " address range. Truncating partition[0].");
- mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
- wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
- }
-
- if ((mem_start < reg_start) &&
- ((mem_start + mem_size) > reg_start)) {
- /* Guarantee that the memory partition doesn't overlap the
- * registers partition */
- wl12xx_debug(DEBUG_SPI, "End of partition[0] is "
- "overlapping partition[1]. Adjusted.");
- mem_size = reg_start - mem_start;
- wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
- } else if ((reg_start < mem_start) &&
- ((reg_start + reg_size) > mem_start)) {
- /* Guarantee that the register partition doesn't overlap the
- * memory partition */
- wl12xx_debug(DEBUG_SPI, "End of partition[1] is"
- " overlapping partition[0]. Adjusted.");
- reg_size = mem_start - reg_start;
- wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- mem_start, mem_size);
- wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- reg_start, reg_size);
- }
-
- partition[0].start = mem_start;
- partition[0].size = mem_size;
- partition[1].start = reg_start;
- partition[1].size = reg_size;
-
- wl->physical_mem_addr = mem_start;
- wl->physical_reg_addr = reg_start;
-
- wl->virtual_mem_addr = 0;
- wl->virtual_reg_addr = mem_size;
-
- t.tx_buf = tx_buf;
- t.len = sizeof(tx_buf);
- spi_message_add_tail(&t, &m);
-
- spi_sync(wl->spi, &m);
-}
-
-void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf,
- size_t len)
-{
- struct spi_transfer t[3];
- struct spi_message m;
- char busy_buf[TNETWIF_READ_OFFSET_BYTES];
- u32 cmd;
-
- cmd = 0;
- cmd |= WSPI_CMD_READ;
- cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
- cmd |= addr & WSPI_CMD_BYTE_ADDR;
-
- spi_message_init(&m);
- memset(t, 0, sizeof(t));
-
- t[0].tx_buf = &cmd;
- t[0].len = 4;
- spi_message_add_tail(&t[0], &m);
-
- /* Busy and non busy words read */
- t[1].rx_buf = busy_buf;
- t[1].len = TNETWIF_READ_OFFSET_BYTES;
- spi_message_add_tail(&t[1], &m);
-
- t[2].rx_buf = buf;
- t[2].len = len;
- spi_message_add_tail(&t[2], &m);
-
- spi_sync(wl->spi, &m);
-
- /* FIXME: check busy words */
-
- wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd));
- wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
-}
-
-void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf,
- size_t len)
-{
- struct spi_transfer t[2];
- struct spi_message m;
- u32 cmd;
-
- cmd = 0;
- cmd |= WSPI_CMD_WRITE;
- cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
- cmd |= addr & WSPI_CMD_BYTE_ADDR;
-
- spi_message_init(&m);
- memset(t, 0, sizeof(t));
-
- t[0].tx_buf = &cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].tx_buf = buf;
- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
-
- spi_sync(wl->spi, &m);
-
- wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd));
- wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
-}
-
-void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf,
- size_t len)
-{
- int physical;
-
- physical = wl12xx_translate_mem_addr(wl, addr);
-
- wl12xx_spi_read(wl, physical, buf, len);
-}
-
-void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf,
- size_t len)
-{
- int physical;
-
- physical = wl12xx_translate_mem_addr(wl, addr);
-
- wl12xx_spi_write(wl, physical, buf, len);
-}
-
-u32 wl12xx_mem_read32(struct wl12xx *wl, int addr)
-{
- return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr));
-}
-
-void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val)
-{
- wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val);
-}
-
-u32 wl12xx_reg_read32(struct wl12xx *wl, int addr)
-{
- return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr));
-}
-
-void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val)
-{
- wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val);
-}
diff --git a/drivers/net/wireless/wl12xx/spi.h b/drivers/net/wireless/wl12xx/spi.h
deleted file mode 100644
index fd3227e..0000000
--- a/drivers/net/wireless/wl12xx/spi.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_SPI_H__
-#define __WL12XX_SPI_H__
-
-#include "cmd.h"
-#include "acx.h"
-#include "reg.h"
-
-#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
-
-#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0
-#define HW_ACCESS_PART0_START_ADDR 0x1FFC4
-#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8
-#define HW_ACCESS_PART1_START_ADDR 0x1FFCC
-
-#define HW_ACCESS_REGISTER_SIZE 4
-
-#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
-
-#define WSPI_CMD_READ 0x40000000
-#define WSPI_CMD_WRITE 0x00000000
-#define WSPI_CMD_FIXED 0x20000000
-#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
-#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
-#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
-
-#define WSPI_INIT_CMD_CRC_LEN 5
-
-#define WSPI_INIT_CMD_START 0x00
-#define WSPI_INIT_CMD_TX 0x40
-/* the extra bypass bit is sampled by the TNET as '1' */
-#define WSPI_INIT_CMD_BYPASS_BIT 0x80
-#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
-#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
-#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
-#define WSPI_INIT_CMD_IOD 0x40
-#define WSPI_INIT_CMD_IP 0x20
-#define WSPI_INIT_CMD_CS 0x10
-#define WSPI_INIT_CMD_WS 0x08
-#define WSPI_INIT_CMD_WSPI 0x01
-#define WSPI_INIT_CMD_END 0x01
-
-#define WSPI_INIT_CMD_LEN 8
-
-#define TNETWIF_READ_OFFSET_BYTES 8
-#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
- ((TNETWIF_READ_OFFSET_BYTES - 4) / sizeof(u32))
-#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
-
-
-/* Raw target IO, address is not translated */
-void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, size_t len);
-void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, size_t len);
-
-/* Memory target IO, address is tranlated to partition 0 */
-void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, size_t len);
-void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, size_t len);
-u32 wl12xx_mem_read32(struct wl12xx *wl, int addr);
-void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val);
-
-/* Registers IO */
-u32 wl12xx_reg_read32(struct wl12xx *wl, int addr);
-void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val);
-
-/* INIT and RESET words */
-void wl12xx_spi_reset(struct wl12xx *wl);
-void wl12xx_spi_init(struct wl12xx *wl);
-void wl12xx_set_partition(struct wl12xx *wl,
- u32 part_start, u32 part_size,
- u32 reg_start, u32 reg_size);
-
-static inline u32 wl12xx_read32(struct wl12xx *wl, int addr)
-{
- u32 response;
-
- wl12xx_spi_read(wl, addr, &response, sizeof(u32));
-
- return response;
-}
-
-static inline void wl12xx_write32(struct wl12xx *wl, int addr, u32 val)
-{
- wl12xx_spi_write(wl, addr, &val, sizeof(u32));
-}
-
-#endif /* __WL12XX_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
deleted file mode 100644
index 62145e2..0000000
--- a/drivers/net/wireless/wl12xx/tx.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "wl12xx.h"
-#include "reg.h"
-#include "spi.h"
-#include "tx.h"
-#include "ps.h"
-
-static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
-{
- int used, data_in_count;
-
- data_in_count = wl->data_in_count;
-
- if (data_in_count < data_out_count)
- /* data_in_count has wrapped */
- data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
-
- used = data_in_count - data_out_count;
-
- WARN_ON(used < 0);
- WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
-
- if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
- return true;
- else
- return false;
-}
-
-static int wl12xx_tx_path_status(struct wl12xx *wl)
-{
- u32 status, addr, data_out_count;
- bool busy;
-
- addr = wl->data_path->tx_control_addr;
- status = wl12xx_mem_read32(wl, addr);
- data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
- busy = wl12xx_tx_double_buffer_busy(wl, data_out_count);
-
- if (busy)
- return -EBUSY;
-
- return 0;
-}
-
-static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb)
-{
- int i;
-
- for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
- if (wl->tx_frames[i] == NULL) {
- wl->tx_frames[i] = skb;
- return i;
- }
-
- return -EBUSY;
-}
-
-static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr,
- struct ieee80211_tx_info *control, u16 fc)
-{
- *(u16 *)&tx_hdr->control = 0;
-
- tx_hdr->control.rate_policy = 0;
-
- /* 802.11 packets */
- tx_hdr->control.packet_type = 0;
-
- if (control->flags & IEEE80211_TX_CTL_NO_ACK)
- tx_hdr->control.ack_policy = 1;
-
- tx_hdr->control.tx_complete = 1;
-
- if ((fc & IEEE80211_FTYPE_DATA) &&
- ((fc & IEEE80211_STYPE_QOS_DATA) ||
- (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
- tx_hdr->control.qos = 1;
-}
-
-/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
-#define MAX_MSDU_SECURITY_LENGTH 16
-#define MAX_MPDU_SECURITY_LENGTH 16
-#define WLAN_QOS_HDR_LEN 26
-#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \
- WLAN_QOS_HDR_LEN)
-#define HW_BLOCK_SIZE 252
-static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
-{
- u16 payload_len, frag_threshold, mem_blocks;
- u16 num_mpdus, mem_blocks_per_frag;
-
- frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
- tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
-
- payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
-
- if (payload_len > frag_threshold) {
- mem_blocks_per_frag =
- ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
- HW_BLOCK_SIZE) + 1;
- num_mpdus = payload_len / frag_threshold;
- mem_blocks = num_mpdus * mem_blocks_per_frag;
- payload_len -= num_mpdus * frag_threshold;
- num_mpdus++;
-
- } else {
- mem_blocks_per_frag = 0;
- mem_blocks = 0;
- num_mpdus = 1;
- }
-
- mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
-
- if (num_mpdus > 1)
- mem_blocks += min(num_mpdus, mem_blocks_per_frag);
-
- tx_hdr->num_mem_blocks = mem_blocks;
-}
-
-static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
- struct ieee80211_tx_info *control)
-{
- struct tx_double_buffer_desc *tx_hdr;
- struct ieee80211_rate *rate;
- int id;
- u16 fc;
-
- if (!skb)
- return -EINVAL;
-
- id = wl12xx_tx_id(wl, skb);
- if (id < 0)
- return id;
-
- fc = *(u16 *)skb->data;
- tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
- sizeof(*tx_hdr));
-
- tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
- rate = ieee80211_get_tx_rate(wl->hw, control);
- tx_hdr->rate = cpu_to_le16(rate->hw_value);
- tx_hdr->expiry_time = cpu_to_le32(1 << 16);
- tx_hdr->id = id;
-
- /* FIXME: how to get the correct queue id? */
- tx_hdr->xmit_queue = 0;
-
- wl12xx_tx_control(tx_hdr, control, fc);
- wl12xx_tx_frag_block_num(tx_hdr);
-
- return 0;
-}
-
-/* We copy the packet to the target */
-static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
- struct ieee80211_tx_info *control)
-{
- struct tx_double_buffer_desc *tx_hdr;
- int len;
- u32 addr;
-
- if (!skb)
- return -EINVAL;
-
- tx_hdr = (struct tx_double_buffer_desc *) skb->data;
-
- if (control->control.hw_key &&
- control->control.hw_key->alg == ALG_TKIP) {
- int hdrlen;
- u16 fc;
- u8 *pos;
-
- fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
- tx_hdr->length += WL12XX_TKIP_IV_SPACE;
-
- hdrlen = ieee80211_hdrlen(fc);
-
- pos = skb_push(skb, WL12XX_TKIP_IV_SPACE);
- memmove(pos, pos + WL12XX_TKIP_IV_SPACE,
- sizeof(*tx_hdr) + hdrlen);
- }
-
- /* Revisit. This is a workaround for getting non-aligned packets.
- This happens at least with EAPOL packets from the user space.
- Our DMA requires packets to be aligned on a 4-byte boundary.
- */
- if (unlikely((long)skb->data & 0x03)) {
- int offset = (4 - (long)skb->data) & 0x03;
- wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
-
- /* check whether the current skb can be used */
- if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
- unsigned char *src = skb->data;
-
- /* align the buffer on a 4-byte boundary */
- skb_reserve(skb, offset);
- memmove(skb->data, src, skb->len);
- } else {
- wl12xx_info("No handler, fixme!");
- return -EINVAL;
- }
- }
-
- /* Our skb->data at this point includes the HW header */
- len = WL12XX_TX_ALIGN(skb->len);
-
- if (wl->data_in_count & 0x1)
- addr = wl->data_path->tx_packet_ring_addr +
- wl->data_path->tx_packet_ring_chunk_size;
- else
- addr = wl->data_path->tx_packet_ring_addr;
-
- wl12xx_spi_mem_write(wl, addr, skb->data, len);
-
- wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
- tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
-
- return 0;
-}
-
-static void wl12xx_tx_trigger(struct wl12xx *wl)
-{
- u32 data, addr;
-
- if (wl->data_in_count & 0x1) {
- addr = ACX_REG_INTERRUPT_TRIG_H;
- data = INTR_TRIG_TX_PROC1;
- } else {
- addr = ACX_REG_INTERRUPT_TRIG;
- data = INTR_TRIG_TX_PROC0;
- }
-
- wl12xx_reg_write32(wl, addr, data);
-
- /* Bumping data in */
- wl->data_in_count = (wl->data_in_count + 1) &
- TX_STATUS_DATA_OUT_COUNT_MASK;
-}
-
-/* caller must hold wl->mutex */
-static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
-{
- struct ieee80211_tx_info *info;
- int ret = 0;
- u8 idx;
-
- info = IEEE80211_SKB_CB(skb);
-
- if (info->control.hw_key) {
- idx = info->control.hw_key->hw_key_idx;
- if (unlikely(wl->default_key != idx)) {
- ret = wl12xx_acx_default_key(wl, idx);
- if (ret < 0)
- return ret;
- }
- }
-
- ret = wl12xx_tx_path_status(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_tx_fill_hdr(wl, skb, info);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_tx_send_packet(wl, skb, info);
- if (ret < 0)
- return ret;
-
- wl12xx_tx_trigger(wl);
-
- return ret;
-}
-
-void wl12xx_tx_work(struct work_struct *work)
-{
- struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
- struct sk_buff *skb;
- bool woken_up = false;
- int ret;
-
- mutex_lock(&wl->mutex);
-
- if (unlikely(wl->state == WL12XX_STATE_OFF))
- goto out;
-
- while ((skb = skb_dequeue(&wl->tx_queue))) {
- if (!woken_up) {
- wl12xx_ps_elp_wakeup(wl);
- woken_up = true;
- }
-
- ret = wl12xx_tx_frame(wl, skb);
- if (ret == -EBUSY) {
- /* firmware buffer is full, stop queues */
- wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
- "stop queues");
- ieee80211_stop_queues(wl->hw);
- wl->tx_queue_stopped = true;
- skb_queue_head(&wl->tx_queue, skb);
- goto out;
- } else if (ret < 0) {
- dev_kfree_skb(skb);
- goto out;
- }
- }
-
-out:
- if (woken_up)
- wl12xx_ps_elp_sleep(wl);
-
- mutex_unlock(&wl->mutex);
-}
-
-static const char *wl12xx_tx_parse_status(u8 status)
-{
- /* 8 bit status field, one character per bit plus null */
- static char buf[9];
- int i = 0;
-
- memset(buf, 0, sizeof(buf));
-
- if (status & TX_DMA_ERROR)
- buf[i++] = 'm';
- if (status & TX_DISABLED)
- buf[i++] = 'd';
- if (status & TX_RETRY_EXCEEDED)
- buf[i++] = 'r';
- if (status & TX_TIMEOUT)
- buf[i++] = 't';
- if (status & TX_KEY_NOT_FOUND)
- buf[i++] = 'k';
- if (status & TX_ENCRYPT_FAIL)
- buf[i++] = 'e';
- if (status & TX_UNAVAILABLE_PRIORITY)
- buf[i++] = 'p';
-
- /* bit 0 is unused apparently */
-
- return buf;
-}
-
-static void wl12xx_tx_packet_cb(struct wl12xx *wl,
- struct tx_result *result)
-{
- struct ieee80211_tx_info *info;
- struct sk_buff *skb;
- int hdrlen, ret;
- u8 *frame;
-
- skb = wl->tx_frames[result->id];
- if (skb == NULL) {
- wl12xx_error("SKB for packet %d is NULL", result->id);
- return;
- }
-
- info = IEEE80211_SKB_CB(skb);
-
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (result->status == TX_SUCCESS))
- info->flags |= IEEE80211_TX_STAT_ACK;
-
- info->status.rates[0].count = result->ack_failures + 1;
- wl->stats.retry_count += result->ack_failures;
-
- /*
- * We have to remove our private TX header before pushing
- * the skb back to mac80211.
- */
- frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
- if (info->control.hw_key &&
- info->control.hw_key->alg == ALG_TKIP) {
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen);
- skb_pull(skb, WL12XX_TKIP_IV_SPACE);
- }
-
- wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
- " status 0x%x (%s)",
- result->id, skb, result->ack_failures, result->rate,
- result->status, wl12xx_tx_parse_status(result->status));
-
-
- ieee80211_tx_status(wl->hw, skb);
-
- wl->tx_frames[result->id] = NULL;
-
- if (wl->tx_queue_stopped) {
- wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
-
- skb = skb_dequeue(&wl->tx_queue);
-
- /* The skb can be NULL because tx_work might have been
- scheduled before the queue was stopped making the
- queue empty */
-
- if (skb) {
- ret = wl12xx_tx_frame(wl, skb);
- if (ret == -EBUSY) {
- /* firmware buffer is still full */
- wl12xx_debug(DEBUG_TX, "cb: fw buffer "
- "still full");
- skb_queue_head(&wl->tx_queue, skb);
- return;
- } else if (ret < 0) {
- dev_kfree_skb(skb);
- return;
- }
- }
-
- wl12xx_debug(DEBUG_TX, "cb: waking queues");
- ieee80211_wake_queues(wl->hw);
- wl->tx_queue_stopped = false;
- }
-}
-
-/* Called upon reception of a TX complete interrupt */
-void wl12xx_tx_complete(struct wl12xx *wl)
-{
- int i, result_index, num_complete = 0;
- struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
-
- if (unlikely(wl->state != WL12XX_STATE_ON))
- return;
-
- /* First we read the result */
- wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
- result, sizeof(result));
-
- result_index = wl->next_tx_complete;
-
- for (i = 0; i < ARRAY_SIZE(result); i++) {
- result_ptr = &result[result_index];
-
- if (result_ptr->done_1 == 1 &&
- result_ptr->done_2 == 1) {
- wl12xx_tx_packet_cb(wl, result_ptr);
-
- result_ptr->done_1 = 0;
- result_ptr->done_2 = 0;
-
- result_index = (result_index + 1) &
- (FW_TX_CMPLT_BLOCK_SIZE - 1);
- num_complete++;
- } else {
- break;
- }
- }
-
- /* Every completed frame needs to be acknowledged */
- if (num_complete) {
- /*
- * If we've wrapped, we have to clear
- * the results in 2 steps.
- */
- if (result_index > wl->next_tx_complete) {
- /* Only 1 write is needed */
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr +
- (wl->next_tx_complete *
- sizeof(struct tx_result)),
- &result[wl->next_tx_complete],
- num_complete *
- sizeof(struct tx_result));
-
-
- } else if (result_index < wl->next_tx_complete) {
- /* 2 writes are needed */
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr +
- (wl->next_tx_complete *
- sizeof(struct tx_result)),
- &result[wl->next_tx_complete],
- (FW_TX_CMPLT_BLOCK_SIZE -
- wl->next_tx_complete) *
- sizeof(struct tx_result));
-
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr,
- result,
- (num_complete -
- FW_TX_CMPLT_BLOCK_SIZE +
- wl->next_tx_complete) *
- sizeof(struct tx_result));
-
- } else {
- /* We have to write the whole array */
- wl12xx_spi_mem_write(wl,
- wl->data_path->tx_complete_addr,
- result,
- FW_TX_CMPLT_BLOCK_SIZE *
- sizeof(struct tx_result));
- }
-
- }
-
- wl->next_tx_complete = result_index;
-}
-
-/* caller must hold wl->mutex */
-void wl12xx_tx_flush(struct wl12xx *wl)
-{
- int i;
- struct sk_buff *skb;
- struct ieee80211_tx_info *info;
-
- /* TX failure */
-/* control->flags = 0; FIXME */
-
- while ((skb = skb_dequeue(&wl->tx_queue))) {
- info = IEEE80211_SKB_CB(skb);
-
- wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
-
- if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
- continue;
-
- ieee80211_tx_status(wl->hw, skb);
- }
-
- for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
- if (wl->tx_frames[i] != NULL) {
- skb = wl->tx_frames[i];
- info = IEEE80211_SKB_CB(skb);
-
- if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
- continue;
-
- ieee80211_tx_status(wl->hw, skb);
- wl->tx_frames[i] = NULL;
- }
-}
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
deleted file mode 100644
index dc82691..0000000
--- a/drivers/net/wireless/wl12xx/tx.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_TX_H__
-#define __WL12XX_TX_H__
-
-#include <linux/bitops.h>
-
-/*
- *
- * TX PATH
- *
- * The Tx path uses a double buffer and a tx_control structure, each located
- * at a fixed address in the device's memory. On startup, the host retrieves
- * the pointers to these addresses. A double buffer allows for continuous data
- * flow towards the device. The host keeps track of which buffer is available
- * and alternates between these two buffers on a per packet basis.
- *
- * The size of each of the two buffers is large enough to hold the longest
- * 802.3 packet - maximum size Ethernet packet + header + descriptor.
- * TX complete indication will be received a-synchronously in a TX done cyclic
- * buffer which is composed of 16 tx_result descriptors structures and is used
- * in a cyclic manner.
- *
- * The TX (HOST) procedure is as follows:
- * 1. Read the Tx path status, that will give the data_out_count.
- * 2. goto 1, if not possible.
- * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
- * buffer).
- * 3. Copy the packet (preceded by double_buffer_desc), if possible.
- * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
- * buffer).
- * 4. increment data_in_count.
- * 5. Inform the firmware by generating a firmware internal interrupt.
- * 6. FW will increment data_out_count after it reads the buffer.
- *
- * The TX Complete procedure:
- * 1. To get a TX complete indication the host enables the tx_complete flag in
- * the TX descriptor Structure.
- * 2. For each packet with a Tx Complete field set, the firmware adds the
- * transmit results to the cyclic buffer (txDoneRing) and sets both done_1
- * and done_2 to 1 to indicate driver ownership.
- * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
- * host to process the new data. Note: interrupt will be send per packet if
- * TX complete indication was requested in tx_control or per crossing
- * aggregation threshold.
- * 4. After receiving the Tx Complete interrupt, the host reads the
- * TxDescriptorDone information in a cyclic manner and clears both done_1
- * and done_2 fields.
- *
- */
-
-#define TX_COMPLETE_REQUIRED_BIT 0x80
-#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
-#define WL12XX_TX_ALIGN_TO 4
-#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \
- ~(WL12XX_TX_ALIGN_TO - 1))
-#define WL12XX_TKIP_IV_SPACE 4
-
-struct tx_control {
- /* Rate Policy (class) index */
- unsigned rate_policy:3;
-
- /* When set, no ack policy is expected */
- unsigned ack_policy:1;
-
- /*
- * Packet type:
- * 0 -> 802.11
- * 1 -> 802.3
- * 2 -> IP
- * 3 -> raw codec
- */
- unsigned packet_type:2;
-
- /* If set, this is a QoS-Null or QoS-Data frame */
- unsigned qos:1;
-
- /*
- * If set, the target triggers the tx complete INT
- * upon frame sending completion.
- */
- unsigned tx_complete:1;
-
- /* 2 bytes padding before packet header */
- unsigned xfer_pad:1;
-
- unsigned reserved:7;
-} __attribute__ ((packed));
-
-
-struct tx_double_buffer_desc {
- /* Length of payload, including headers. */
- u16 length;
-
- /*
- * A bit mask that specifies the initial rate to be used
- * Possible values are:
- * 0x0001 - 1Mbits
- * 0x0002 - 2Mbits
- * 0x0004 - 5.5Mbits
- * 0x0008 - 6Mbits
- * 0x0010 - 9Mbits
- * 0x0020 - 11Mbits
- * 0x0040 - 12Mbits
- * 0x0080 - 18Mbits
- * 0x0100 - 22Mbits
- * 0x0200 - 24Mbits
- * 0x0400 - 36Mbits
- * 0x0800 - 48Mbits
- * 0x1000 - 54Mbits
- */
- u16 rate;
-
- /* Time in us that a packet can spend in the target */
- u32 expiry_time;
-
- /* index of the TX queue used for this packet */
- u8 xmit_queue;
-
- /* Used to identify a packet */
- u8 id;
-
- struct tx_control control;
-
- /*
- * The FW should cut the packet into fragments
- * of this size.
- */
- u16 frag_threshold;
-
- /* Numbers of HW queue blocks to be allocated */
- u8 num_mem_blocks;
-
- u8 reserved;
-} __attribute__ ((packed));
-
-enum {
- TX_SUCCESS = 0,
- TX_DMA_ERROR = BIT(7),
- TX_DISABLED = BIT(6),
- TX_RETRY_EXCEEDED = BIT(5),
- TX_TIMEOUT = BIT(4),
- TX_KEY_NOT_FOUND = BIT(3),
- TX_ENCRYPT_FAIL = BIT(2),
- TX_UNAVAILABLE_PRIORITY = BIT(1),
-};
-
-struct tx_result {
- /*
- * Ownership synchronization between the host and
- * the firmware. If done_1 and done_2 are cleared,
- * owned by the FW (no info ready).
- */
- u8 done_1;
-
- /* same as double_buffer_desc->id */
- u8 id;
-
- /*
- * Total air access duration consumed by this
- * packet, including all retries and overheads.
- */
- u16 medium_usage;
-
- /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
- u32 medium_delay;
-
- /* Time between host xfer and tx complete */
- u32 fw_hnadling_time;
-
- /* The LS-byte of the last TKIP sequence number. */
- u8 lsb_seq_num;
-
- /* Retry count */
- u8 ack_failures;
-
- /* At which rate we got a ACK */
- u16 rate;
-
- u16 reserved;
-
- /* TX_* */
- u8 status;
-
- /* See done_1 */
- u8 done_2;
-} __attribute__ ((packed));
-
-void wl12xx_tx_work(struct work_struct *work);
-void wl12xx_tx_complete(struct wl12xx *wl);
-void wl12xx_tx_flush(struct wl12xx *wl);
-
-#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
deleted file mode 100644
index ce1561a..0000000
--- a/drivers/net/wireless/wl12xx/wl1251.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "wl1251.h"
-#include "reg.h"
-#include "spi.h"
-#include "boot.h"
-#include "event.h"
-#include "acx.h"
-#include "tx.h"
-#include "rx.h"
-#include "ps.h"
-#include "init.h"
-
-static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = {
- [PART_DOWN] = {
- .mem = {
- .start = 0x00000000,
- .size = 0x00016800
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = REGISTERS_DOWN_SIZE
- },
- },
-
- [PART_WORK] = {
- .mem = {
- .start = 0x00028000,
- .size = 0x00014000
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = REGISTERS_WORK_SIZE
- },
- },
-
- /* WL1251 doesn't use the DRPW partition, so we don't set it here */
-};
-
-static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
- [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474),
- [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478),
- [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494),
- [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498),
- [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C),
- [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
- [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4),
- [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8),
- [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000),
- [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C),
- [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804)
-};
-
-static int wl1251_upload_firmware(struct wl12xx *wl)
-{
- struct wl12xx_partition_set *p_table = wl->chip.p_table;
- int addr, chunk_num, partition_limit;
- size_t fw_data_len;
- u8 *p;
-
- /* whal_FwCtrl_LoadFwImageSm() */
-
- wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
- wl12xx_reg_read32(wl, CHIP_ID_B));
-
- /* 10.0 check firmware length and set partition */
- fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) |
- (wl->fw[6] << 8) | (wl->fw[7]);
-
- wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
- CHUNK_SIZE);
-
- if ((fw_data_len % 4) != 0) {
- wl12xx_error("firmware length not multiple of four");
- return -EIO;
- }
-
- wl12xx_set_partition(wl,
- p_table[PART_DOWN].mem.start,
- p_table[PART_DOWN].mem.size,
- p_table[PART_DOWN].reg.start,
- p_table[PART_DOWN].reg.size);
-
- /* 10.1 set partition limit and chunk num */
- chunk_num = 0;
- partition_limit = p_table[PART_DOWN].mem.size;
-
- while (chunk_num < fw_data_len / CHUNK_SIZE) {
- /* 10.2 update partition, if needed */
- addr = p_table[PART_DOWN].mem.start +
- (chunk_num + 2) * CHUNK_SIZE;
- if (addr > partition_limit) {
- addr = p_table[PART_DOWN].mem.start +
- chunk_num * CHUNK_SIZE;
- partition_limit = chunk_num * CHUNK_SIZE +
- p_table[PART_DOWN].mem.size;
- wl12xx_set_partition(wl,
- addr,
- p_table[PART_DOWN].mem.size,
- p_table[PART_DOWN].reg.start,
- p_table[PART_DOWN].reg.size);
- }
-
- /* 10.3 upload the chunk */
- addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
- p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
- wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
- p, addr);
- wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE);
-
- chunk_num++;
- }
-
- /* 10.4 upload the last chunk */
- addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
- p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
- wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
- fw_data_len % CHUNK_SIZE, p, addr);
- wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
-
- return 0;
-}
-
-static int wl1251_upload_nvs(struct wl12xx *wl)
-{
- size_t nvs_len, nvs_bytes_written, burst_len;
- int nvs_start, i;
- u32 dest_addr, val;
- u8 *nvs_ptr, *nvs;
-
- nvs = wl->nvs;
- if (nvs == NULL)
- return -ENODEV;
-
- nvs_ptr = nvs;
-
- nvs_len = wl->nvs_len;
- nvs_start = wl->fw_len;
-
- /*
- * Layout before the actual NVS tables:
- * 1 byte : burst length.
- * 2 bytes: destination address.
- * n bytes: data to burst copy.
- *
- * This is ended by a 0 length, then the NVS tables.
- */
-
- while (nvs_ptr[0]) {
- burst_len = nvs_ptr[0];
- dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
-
- /* We move our pointer to the data */
- nvs_ptr += 3;
-
- for (i = 0; i < burst_len; i++) {
- val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
- | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
- wl12xx_debug(DEBUG_BOOT,
- "nvs burst write 0x%x: 0x%x",
- dest_addr, val);
- wl12xx_mem_write32(wl, dest_addr, val);
-
- nvs_ptr += 4;
- dest_addr += 4;
- }
- }
-
- /*
- * We've reached the first zero length, the first NVS table
- * is 7 bytes further.
- */
- nvs_ptr += 7;
- nvs_len -= nvs_ptr - nvs;
- nvs_len = ALIGN(nvs_len, 4);
-
- /* Now we must set the partition correctly */
- wl12xx_set_partition(wl, nvs_start,
- wl->chip.p_table[PART_DOWN].mem.size,
- wl->chip.p_table[PART_DOWN].reg.start,
- wl->chip.p_table[PART_DOWN].reg.size);
-
- /* And finally we upload the NVS tables */
- nvs_bytes_written = 0;
- while (nvs_bytes_written < nvs_len) {
- val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
- | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
-
- val = cpu_to_le32(val);
-
- wl12xx_debug(DEBUG_BOOT,
- "nvs write table 0x%x: 0x%x",
- nvs_start, val);
- wl12xx_mem_write32(wl, nvs_start, val);
-
- nvs_ptr += 4;
- nvs_bytes_written += 4;
- nvs_start += 4;
- }
-
- return 0;
-}
-
-static int wl1251_boot(struct wl12xx *wl)
-{
- int ret = 0, minor_minor_e2_ver;
- u32 tmp, boot_data;
-
- ret = wl12xx_boot_soft_reset(wl);
- if (ret < 0)
- goto out;
-
- /* 2. start processing NVS file */
- ret = wl->chip.op_upload_nvs(wl);
- if (ret < 0)
- goto out;
-
- /* write firmware's last address (ie. it's length) to
- * ACX_EEPROMLESS_IND_REG */
- wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
-
- /* 6. read the EEPROM parameters */
- tmp = wl12xx_reg_read32(wl, SCR_PAD2);
-
- /* 7. read bootdata */
- wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
- wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
- tmp = wl12xx_reg_read32(wl, SCR_PAD3);
-
- /* 8. check bootdata and call restart sequence */
- wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
- minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
-
- wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
- "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
- wl->boot_attr.radio_type, wl->boot_attr.major,
- wl->boot_attr.minor, minor_minor_e2_ver);
-
- ret = wl12xx_boot_init_seq(wl);
- if (ret < 0)
- goto out;
-
- /* 9. NVS processing done */
- boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
-
- wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
-
- /* 10. check that ECPU_CONTROL_HALT bits are set in
- * pWhalBus->uBootData and start uploading firmware
- */
- if ((boot_data & ECPU_CONTROL_HALT) == 0) {
- wl12xx_error("boot failed, ECPU_CONTROL_HALT not set");
- ret = -EIO;
- goto out;
- }
-
- ret = wl->chip.op_upload_fw(wl);
- if (ret < 0)
- goto out;
-
- /* 10.5 start firmware */
- ret = wl12xx_boot_run_firmware(wl);
- if (ret < 0)
- goto out;
-
- /* Get and save the firmware version */
- wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
-
-out:
- return ret;
-}
-
-static int wl1251_mem_cfg(struct wl12xx *wl)
-{
- struct wl1251_acx_config_memory mem_conf;
- int ret, i;
-
- wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg");
-
- /* memory config */
- mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
- mem_conf.mem_config.rx_mem_block_num = 35;
- mem_conf.mem_config.tx_min_mem_block_num = 64;
- mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES;
- mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING;
- mem_conf.mem_config.num_ssid_profiles = 1;
- mem_conf.mem_config.debug_buffer_size =
- cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
-
- /* RX queue config */
- mem_conf.rx_queue_config.dma_address = 0;
- mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF;
- mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
- mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE;
-
- /* TX queue config */
- for (i = 0; i < MAX_TX_QUEUES; i++) {
- mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
- mem_conf.tx_queue_config[i].attributes = i;
- }
-
- mem_conf.header.id = ACX_MEM_CFG;
- mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) -
- sizeof(struct acx_header);
- mem_conf.header.len -=
- (MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) *
- sizeof(struct wl1251_acx_tx_queue_config);
-
- ret = wl12xx_cmd_configure(wl, &mem_conf,
- sizeof(struct wl1251_acx_config_memory));
- if (ret < 0)
- wl12xx_warning("wl1251 mem config failed: %d", ret);
-
- return ret;
-}
-
-static int wl1251_hw_init_mem_config(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl1251_mem_cfg(wl);
- if (ret < 0)
- return ret;
-
- wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
- GFP_KERNEL);
- if (!wl->target_mem_map) {
- wl12xx_error("couldn't allocate target memory map");
- return -ENOMEM;
- }
-
- /* we now ask for the firmware built memory map */
- ret = wl12xx_acx_mem_map(wl, wl->target_mem_map,
- sizeof(struct wl1251_acx_mem_map));
- if (ret < 0) {
- wl12xx_error("couldn't retrieve firmware memory map");
- kfree(wl->target_mem_map);
- wl->target_mem_map = NULL;
- return ret;
- }
-
- return 0;
-}
-
-static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag)
-{
- u32 cpu_ctrl;
-
- /* 10.5.0 run the firmware (I) */
- cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
-
- /* 10.5.1 run the firmware (II) */
- cpu_ctrl &= ~flag;
- wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
-}
-
-static void wl1251_target_enable_interrupts(struct wl12xx *wl)
-{
- /* Enable target's interrupts */
- wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
- WL1251_ACX_INTR_RX1_DATA |
- WL1251_ACX_INTR_TX_RESULT |
- WL1251_ACX_INTR_EVENT_A |
- WL1251_ACX_INTR_EVENT_B |
- WL1251_ACX_INTR_INIT_COMPLETE;
- wl12xx_boot_target_enable_interrupts(wl);
-}
-
-static void wl1251_irq_work(struct work_struct *work)
-{
- u32 intr;
- struct wl12xx *wl =
- container_of(work, struct wl12xx, irq_work);
-
- mutex_lock(&wl->mutex);
-
- wl12xx_debug(DEBUG_IRQ, "IRQ work");
-
- if (wl->state == WL12XX_STATE_OFF)
- goto out;
-
- wl12xx_ps_elp_wakeup(wl);
-
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
-
- intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
- wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr);
-
- if (wl->data_path) {
- wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr,
- &wl->rx_counter, sizeof(u32));
-
- /* We handle a frmware bug here */
- switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
- case 0:
- wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync");
- intr &= ~WL1251_ACX_INTR_RX0_DATA;
- intr &= ~WL1251_ACX_INTR_RX1_DATA;
- break;
- case 1:
- wl12xx_debug(DEBUG_IRQ, "RX: FW +1");
- intr |= WL1251_ACX_INTR_RX0_DATA;
- intr &= ~WL1251_ACX_INTR_RX1_DATA;
- break;
- case 2:
- wl12xx_debug(DEBUG_IRQ, "RX: FW +2");
- intr |= WL1251_ACX_INTR_RX0_DATA;
- intr |= WL1251_ACX_INTR_RX1_DATA;
- break;
- default:
- wl12xx_warning("RX: FW and host out of sync: %d",
- wl->rx_counter - wl->rx_handled);
- break;
- }
-
- wl->rx_handled = wl->rx_counter;
-
-
- wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
- }
-
- intr &= wl->intr_mask;
-
- if (intr == 0) {
- wl12xx_debug(DEBUG_IRQ, "INTR is 0");
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
- ~(wl->intr_mask));
-
- goto out_sleep;
- }
-
- if (intr & WL1251_ACX_INTR_RX0_DATA) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
- wl12xx_rx(wl);
- }
-
- if (intr & WL1251_ACX_INTR_RX1_DATA) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
- wl12xx_rx(wl);
- }
-
- if (intr & WL1251_ACX_INTR_TX_RESULT) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
- wl12xx_tx_complete(wl);
- }
-
- if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
- if (intr & WL1251_ACX_INTR_EVENT_A)
- wl12xx_event_handle(wl, 0);
- else
- wl12xx_event_handle(wl, 1);
- }
-
- if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
- wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
-
- wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
-
-out_sleep:
- wl12xx_ps_elp_sleep(wl);
-out:
- mutex_unlock(&wl->mutex);
-}
-
-static int wl1251_hw_init_txq_fill(u8 qid,
- struct acx_tx_queue_qos_config *config,
- u32 num_blocks)
-{
- config->qid = qid;
-
- switch (qid) {
- case QOS_AC_BE:
- config->high_threshold =
- (QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_BE_DEF * num_blocks) / 100;
- break;
- case QOS_AC_BK:
- config->high_threshold =
- (QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_BK_DEF * num_blocks) / 100;
- break;
- case QOS_AC_VI:
- config->high_threshold =
- (QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_VI_DEF * num_blocks) / 100;
- break;
- case QOS_AC_VO:
- config->high_threshold =
- (QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
- config->low_threshold =
- (QOS_TX_LOW_VO_DEF * num_blocks) / 100;
- break;
- default:
- wl12xx_error("Invalid TX queue id: %d", qid);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl)
-{
- struct acx_tx_queue_qos_config config;
- struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
- int ret, i;
-
- wl12xx_debug(DEBUG_ACX, "acx tx queue config");
-
- config.header.id = ACX_TX_QUEUE_CFG;
- config.header.len = sizeof(struct acx_tx_queue_qos_config) -
- sizeof(struct acx_header);
-
- for (i = 0; i < MAX_NUM_OF_AC; i++) {
- ret = wl1251_hw_init_txq_fill(i, &config,
- wl_mem_map->num_tx_mem_blocks);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_configure(wl, &config, sizeof(config));
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static int wl1251_hw_init_data_path_config(struct wl12xx *wl)
-{
- int ret;
-
- /* asking for the data path parameters */
- wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
- GFP_KERNEL);
- if (!wl->data_path) {
- wl12xx_error("Couldnt allocate data path parameters");
- return -ENOMEM;
- }
-
- ret = wl12xx_acx_data_path_params(wl, wl->data_path);
- if (ret < 0) {
- kfree(wl->data_path);
- wl->data_path = NULL;
- return ret;
- }
-
- return 0;
-}
-
-static int wl1251_hw_init(struct wl12xx *wl)
-{
- struct wl1251_acx_mem_map *wl_mem_map;
- int ret;
-
- ret = wl12xx_hw_init_hwenc_config(wl);
- if (ret < 0)
- return ret;
-
- /* Template settings */
- ret = wl12xx_hw_init_templates_config(wl);
- if (ret < 0)
- return ret;
-
- /* Default memory configuration */
- ret = wl1251_hw_init_mem_config(wl);
- if (ret < 0)
- return ret;
-
- /* Default data path configuration */
- ret = wl1251_hw_init_data_path_config(wl);
- if (ret < 0)
- goto out_free_memmap;
-
- /* RX config */
- ret = wl12xx_hw_init_rx_config(wl,
- RX_CFG_PROMISCUOUS | RX_CFG_TSF,
- RX_FILTER_OPTION_DEF);
- /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
- RX_FILTER_OPTION_FILTER_ALL); */
- if (ret < 0)
- goto out_free_data_path;
-
- /* TX queues config */
- ret = wl1251_hw_init_tx_queue_config(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* PHY layer config */
- ret = wl12xx_hw_init_phy_config(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Beacon filtering */
- ret = wl12xx_hw_init_beacon_filter(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Bluetooth WLAN coexistence */
- ret = wl12xx_hw_init_pta(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Energy detection */
- ret = wl12xx_hw_init_energy_detection(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Beacons and boradcast settings */
- ret = wl12xx_hw_init_beacon_broadcast(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Enable data path */
- ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
- if (ret < 0)
- goto out_free_data_path;
-
- /* Default power state */
- ret = wl12xx_hw_init_power_auth(wl);
- if (ret < 0)
- goto out_free_data_path;
-
- wl_mem_map = wl->target_mem_map;
- wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
- wl_mem_map->num_tx_mem_blocks,
- wl->data_path->tx_control_addr,
- wl_mem_map->num_rx_mem_blocks,
- wl->data_path->rx_control_addr);
-
- return 0;
-
- out_free_data_path:
- kfree(wl->data_path);
-
- out_free_memmap:
- kfree(wl->target_mem_map);
-
- return ret;
-}
-
-static int wl1251_plt_init(struct wl12xx *wl)
-{
- int ret;
-
- ret = wl1251_hw_init_mem_config(wl);
- if (ret < 0)
- return ret;
-
- ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-void wl1251_setup(struct wl12xx *wl)
-{
- /* FIXME: Is it better to use strncpy here or is this ok? */
- wl->chip.fw_filename = WL1251_FW_NAME;
- wl->chip.nvs_filename = WL1251_NVS_NAME;
-
- /* Now we know what chip we're using, so adjust the power on sleep
- * time accordingly */
- wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
-
- wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
- wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
-
- wl->chip.op_upload_nvs = wl1251_upload_nvs;
- wl->chip.op_upload_fw = wl1251_upload_firmware;
- wl->chip.op_boot = wl1251_boot;
- wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
- wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
- wl->chip.op_hw_init = wl1251_hw_init;
- wl->chip.op_plt_init = wl1251_plt_init;
-
- wl->chip.p_table = wl1251_part_table;
- wl->chip.acx_reg_table = wl1251_acx_reg_table;
-
- INIT_WORK(&wl->irq_work, wl1251_irq_work);
-}
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 1f4a443..998e4b6 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -1,7 +1,8 @@
/*
- * This file is part of wl12xx
+ * This file is part of wl1251
*
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008-2009 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
@@ -24,142 +25,400 @@
#ifndef __WL1251_H__
#define __WL1251_H__
+#include <linux/mutex.h>
+#include <linux/list.h>
#include <linux/bitops.h>
+#include <net/mac80211.h>
-#include "wl12xx.h"
-#include "acx.h"
+#define DRIVER_NAME "wl1251"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+ DEBUG_NONE = 0,
+ DEBUG_IRQ = BIT(0),
+ DEBUG_SPI = BIT(1),
+ DEBUG_BOOT = BIT(2),
+ DEBUG_MAILBOX = BIT(3),
+ DEBUG_NETLINK = BIT(4),
+ DEBUG_EVENT = BIT(5),
+ DEBUG_TX = BIT(6),
+ DEBUG_RX = BIT(7),
+ DEBUG_SCAN = BIT(8),
+ DEBUG_CRYPT = BIT(9),
+ DEBUG_PSM = BIT(10),
+ DEBUG_MAC80211 = BIT(11),
+ DEBUG_CMD = BIT(12),
+ DEBUG_ACX = BIT(13),
+ DEBUG_ALL = ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl1251_error(fmt, arg...) \
+ printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl1251_warning(fmt, arg...) \
+ printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl1251_notice(fmt, arg...) \
+ printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1251_info(fmt, arg...) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1251_debug(level, fmt, arg...) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+ } while (0)
+
+#define wl1251_dump(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ 0); \
+ } while (0)
+
+#define wl1251_dump_ascii(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ true); \
+ } while (0)
+
+#define WL1251_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
+ CFG_BSSID_FILTER_EN)
+
+#define WL1251_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \
+ CFG_RX_MGMT_EN | \
+ CFG_RX_DATA_EN | \
+ CFG_RX_CTL_EN | \
+ CFG_RX_BCN_EN | \
+ CFG_RX_AUTH_EN | \
+ CFG_RX_ASSOC_EN)
+
+#define WL1251_BUSY_WORD_LEN 8
+
+struct boot_attr {
+ u32 radio_type;
+ u8 mac_clock;
+ u8 arm_clock;
+ int firmware_debug;
+ u32 minor;
+ u32 major;
+ u32 bugfix;
+};
+
+enum wl1251_state {
+ WL1251_STATE_OFF,
+ WL1251_STATE_ON,
+ WL1251_STATE_PLT,
+};
+
+enum wl1251_partition_type {
+ PART_DOWN,
+ PART_WORK,
+ PART_DRPW,
+
+ PART_TABLE_LEN
+};
+
+struct wl1251_partition {
+ u32 size;
+ u32 start;
+};
+
+struct wl1251_partition_set {
+ struct wl1251_partition mem;
+ struct wl1251_partition reg;
+};
+
+struct wl1251;
+
+struct wl1251_stats {
+ struct acx_statistics *fw_stats;
+ unsigned long fw_stats_update;
+
+ unsigned int retry_count;
+ unsigned int excessive_retries;
+};
+
+struct wl1251_debugfs {
+ struct dentry *rootdir;
+ struct dentry *fw_statistics;
+
+ struct dentry *tx_internal_desc_overflow;
+
+ struct dentry *rx_out_of_mem;
+ struct dentry *rx_hdr_overflow;
+ struct dentry *rx_hw_stuck;
+ struct dentry *rx_dropped;
+ struct dentry *rx_fcs_err;
+ struct dentry *rx_xfr_hint_trig;
+ struct dentry *rx_path_reset;
+ struct dentry *rx_reset_counter;
+
+ struct dentry *dma_rx_requested;
+ struct dentry *dma_rx_errors;
+ struct dentry *dma_tx_requested;
+ struct dentry *dma_tx_errors;
+
+ struct dentry *isr_cmd_cmplt;
+ struct dentry *isr_fiqs;
+ struct dentry *isr_rx_headers;
+ struct dentry *isr_rx_mem_overflow;
+ struct dentry *isr_rx_rdys;
+ struct dentry *isr_irqs;
+ struct dentry *isr_tx_procs;
+ struct dentry *isr_decrypt_done;
+ struct dentry *isr_dma0_done;
+ struct dentry *isr_dma1_done;
+ struct dentry *isr_tx_exch_complete;
+ struct dentry *isr_commands;
+ struct dentry *isr_rx_procs;
+ struct dentry *isr_hw_pm_mode_changes;
+ struct dentry *isr_host_acknowledges;
+ struct dentry *isr_pci_pm;
+ struct dentry *isr_wakeups;
+ struct dentry *isr_low_rssi;
+
+ struct dentry *wep_addr_key_count;
+ struct dentry *wep_default_key_count;
+ /* skipping wep.reserved */
+ struct dentry *wep_key_not_found;
+ struct dentry *wep_decrypt_fail;
+ struct dentry *wep_packets;
+ struct dentry *wep_interrupt;
+
+ struct dentry *pwr_ps_enter;
+ struct dentry *pwr_elp_enter;
+ struct dentry *pwr_missing_bcns;
+ struct dentry *pwr_wake_on_host;
+ struct dentry *pwr_wake_on_timer_exp;
+ struct dentry *pwr_tx_with_ps;
+ struct dentry *pwr_tx_without_ps;
+ struct dentry *pwr_rcvd_beacons;
+ struct dentry *pwr_power_save_off;
+ struct dentry *pwr_enable_ps;
+ struct dentry *pwr_disable_ps;
+ struct dentry *pwr_fix_tsf_ps;
+ /* skipping cont_miss_bcns_spread for now */
+ struct dentry *pwr_rcvd_awake_beacons;
+
+ struct dentry *mic_rx_pkts;
+ struct dentry *mic_calc_failure;
+
+ struct dentry *aes_encrypt_fail;
+ struct dentry *aes_decrypt_fail;
+ struct dentry *aes_encrypt_packets;
+ struct dentry *aes_decrypt_packets;
+ struct dentry *aes_encrypt_interrupt;
+ struct dentry *aes_decrypt_interrupt;
+
+ struct dentry *event_heart_beat;
+ struct dentry *event_calibration;
+ struct dentry *event_rx_mismatch;
+ struct dentry *event_rx_mem_empty;
+ struct dentry *event_rx_pool;
+ struct dentry *event_oom_late;
+ struct dentry *event_phy_transmit_error;
+ struct dentry *event_tx_stuck;
+
+ struct dentry *ps_pspoll_timeouts;
+ struct dentry *ps_upsd_timeouts;
+ struct dentry *ps_upsd_max_sptime;
+ struct dentry *ps_upsd_max_apturn;
+ struct dentry *ps_pspoll_max_apturn;
+ struct dentry *ps_pspoll_utilization;
+ struct dentry *ps_upsd_utilization;
+
+ struct dentry *rxpipe_rx_prep_beacon_drop;
+ struct dentry *rxpipe_descr_host_int_trig_rx_data;
+ struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+ struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+ struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+ struct dentry *tx_queue_len;
+
+ struct dentry *retry_count;
+ struct dentry *excessive_retries;
+};
+
+struct wl1251_if_operations {
+ void (*read)(struct wl1251 *wl, int addr, void *buf, size_t len);
+ void (*write)(struct wl1251 *wl, int addr, void *buf, size_t len);
+ void (*reset)(struct wl1251 *wl);
+ void (*enable_irq)(struct wl1251 *wl);
+ void (*disable_irq)(struct wl1251 *wl);
+};
+
+struct wl1251 {
+ struct ieee80211_hw *hw;
+ bool mac80211_registered;
+
+ void *if_priv;
+ const struct wl1251_if_operations *if_ops;
+
+ void (*set_power)(bool enable);
+ int irq;
+
+ enum wl1251_state state;
+ struct mutex mutex;
+
+ int physical_mem_addr;
+ int physical_reg_addr;
+ int virtual_mem_addr;
+ int virtual_reg_addr;
+
+ int cmd_box_addr;
+ int event_box_addr;
+ struct boot_attr boot_attr;
+
+ u8 *fw;
+ size_t fw_len;
+ u8 *nvs;
+ size_t nvs_len;
+
+ u8 bssid[ETH_ALEN];
+ u8 mac_addr[ETH_ALEN];
+ u8 bss_type;
+ u8 listen_int;
+ int channel;
+
+ void *target_mem_map;
+ struct acx_data_path_params_resp *data_path;
+
+ /* Number of TX packets transferred to the FW, modulo 16 */
+ u32 data_in_count;
+
+ /* Frames scheduled for transmission, not handled yet */
+ struct sk_buff_head tx_queue;
+ bool tx_queue_stopped;
+
+ struct work_struct tx_work;
+ struct work_struct filter_work;
+
+ /* Pending TX frames */
+ struct sk_buff *tx_frames[16];
+
+ /*
+ * Index pointing to the next TX complete entry
+ * in the cyclic XT complete array we get from
+ * the FW.
+ */
+ u32 next_tx_complete;
+
+ /* FW Rx counter */
+ u32 rx_counter;
+
+ /* Rx frames handled */
+ u32 rx_handled;
+
+ /* Current double buffer */
+ u32 rx_current_buffer;
+ u32 rx_last_id;
+
+ /* The target interrupt mask */
+ u32 intr_mask;
+ struct work_struct irq_work;
+
+ /* The mbox event mask */
+ u32 event_mask;
+
+ /* Mailbox pointers */
+ u32 mbox_ptr[2];
+
+ /* Are we currently scanning */
+ bool scanning;
+
+ /* Our association ID */
+ u16 aid;
+
+ /* Default key (for WEP) */
+ u32 default_key;
+
+ unsigned int tx_mgmt_frm_rate;
+ unsigned int tx_mgmt_frm_mod;
+
+ unsigned int rx_config;
+ unsigned int rx_filter;
+
+ /* is firmware in elp mode */
+ bool elp;
+
+ /* we can be in psm, but not in elp, we have to differentiate */
+ bool psm;
+
+ /* PSM mode requested */
+ bool psm_requested;
+
+ u16 beacon_int;
+ u8 dtim_period;
+
+ /* in dBm */
+ int power_level;
+
+ struct wl1251_stats stats;
+ struct wl1251_debugfs debugfs;
+
+ u32 buffer_32;
+ u32 buffer_cmd;
+ u8 buffer_busyword[WL1251_BUSY_WORD_LEN];
+ struct wl1251_rx_descriptor *rx_descriptor;
+
+ u32 chip_id;
+ char fw_ver[21];
+};
+
+int wl1251_plt_start(struct wl1251 *wl);
+int wl1251_plt_stop(struct wl1251 *wl);
+
+struct ieee80211_hw *wl1251_alloc_hw(void);
+int wl1251_free_hw(struct wl1251 *wl);
+int wl1251_init_ieee80211(struct wl1251 *wl);
+void wl1251_enable_interrupts(struct wl1251 *wl);
+void wl1251_disable_interrupts(struct wl1251 *wl);
+
+#define DEFAULT_HW_GEN_MODULATION_TYPE CCK_LONG /* Long Preamble */
+#define DEFAULT_HW_GEN_TX_RATE RATE_2MBPS
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define WL1251_DEFAULT_POWER_LEVEL 20
+
+#define WL1251_TX_QUEUE_MAX_LENGTH 20
+
+#define WL1251_DEFAULT_BEACON_INT 100
+#define WL1251_DEFAULT_DTIM_PERIOD 1
+
+#define WL1251_DEFAULT_CHANNEL 0
+
+#define CHIP_ID_1251_PG10 (0x7010101)
+#define CHIP_ID_1251_PG11 (0x7020101)
+#define CHIP_ID_1251_PG12 (0x7030101)
+#define CHIP_ID_1271_PG10 (0x4030101)
+#define CHIP_ID_1271_PG20 (0x4030111)
#define WL1251_FW_NAME "wl1251-fw.bin"
#define WL1251_NVS_NAME "wl1251-nvs.bin"
#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
-void wl1251_setup(struct wl12xx *wl);
+#define WL1251_PART_DOWN_MEM_START 0x0
+#define WL1251_PART_DOWN_MEM_SIZE 0x16800
+#define WL1251_PART_DOWN_REG_START REGISTERS_BASE
+#define WL1251_PART_DOWN_REG_SIZE REGISTERS_DOWN_SIZE
-
-struct wl1251_acx_memory {
- __le16 num_stations; /* number of STAs to be supported. */
- u16 reserved_1;
-
- /*
- * Nmber of memory buffers for the RX mem pool.
- * The actual number may be less if there are
- * not enough blocks left for the minimum num
- * of TX ones.
- */
- u8 rx_mem_block_num;
- u8 reserved_2;
- u8 num_tx_queues; /* From 1 to 16 */
- u8 host_if_options; /* HOST_IF* */
- u8 tx_min_mem_block_num;
- u8 num_ssid_profiles;
- __le16 debug_buffer_size;
-} __attribute__ ((packed));
-
-
-#define ACX_RX_DESC_MIN 1
-#define ACX_RX_DESC_MAX 127
-#define ACX_RX_DESC_DEF 32
-struct wl1251_acx_rx_queue_config {
- u8 num_descs;
- u8 pad;
- u8 type;
- u8 priority;
- __le32 dma_address;
-} __attribute__ ((packed));
-
-#define ACX_TX_DESC_MIN 1
-#define ACX_TX_DESC_MAX 127
-#define ACX_TX_DESC_DEF 16
-struct wl1251_acx_tx_queue_config {
- u8 num_descs;
- u8 pad[2];
- u8 attributes;
-} __attribute__ ((packed));
-
-#define MAX_TX_QUEUE_CONFIGS 5
-#define MAX_TX_QUEUES 4
-struct wl1251_acx_config_memory {
- struct acx_header header;
-
- struct wl1251_acx_memory mem_config;
- struct wl1251_acx_rx_queue_config rx_queue_config;
- struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
-} __attribute__ ((packed));
-
-struct wl1251_acx_mem_map {
- struct acx_header header;
-
- void *code_start;
- void *code_end;
-
- void *wep_defkey_start;
- void *wep_defkey_end;
-
- void *sta_table_start;
- void *sta_table_end;
-
- void *packet_template_start;
- void *packet_template_end;
-
- void *queue_memory_start;
- void *queue_memory_end;
-
- void *packet_memory_pool_start;
- void *packet_memory_pool_end;
-
- void *debug_buffer1_start;
- void *debug_buffer1_end;
-
- void *debug_buffer2_start;
- void *debug_buffer2_end;
-
- /* Number of blocks FW allocated for TX packets */
- u32 num_tx_mem_blocks;
-
- /* Number of blocks FW allocated for RX packets */
- u32 num_rx_mem_blocks;
-} __attribute__ ((packed));
-
-/*************************************************************************
-
- Host Interrupt Register (WiLink -> Host)
-
-**************************************************************************/
-
-/* RX packet is ready in Xfer buffer #0 */
-#define WL1251_ACX_INTR_RX0_DATA BIT(0)
-
-/* TX result(s) are in the TX complete buffer */
-#define WL1251_ACX_INTR_TX_RESULT BIT(1)
-
-/* OBSOLETE */
-#define WL1251_ACX_INTR_TX_XFR BIT(2)
-
-/* RX packet is ready in Xfer buffer #1 */
-#define WL1251_ACX_INTR_RX1_DATA BIT(3)
-
-/* Event was entered to Event MBOX #A */
-#define WL1251_ACX_INTR_EVENT_A BIT(4)
-
-/* Event was entered to Event MBOX #B */
-#define WL1251_ACX_INTR_EVENT_B BIT(5)
-
-/* OBSOLETE */
-#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6)
-
-/* Trace meassge on MBOX #A */
-#define WL1251_ACX_INTR_TRACE_A BIT(7)
-
-/* Trace meassge on MBOX #B */
-#define WL1251_ACX_INTR_TRACE_B BIT(8)
-
-/* Command processing completion */
-#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9)
-
-/* Init sequence is done */
-#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14)
-
-#define WL1251_ACX_INTR_ALL 0xFFFFFFFF
+#define WL1251_PART_WORK_MEM_START 0x28000
+#define WL1251_PART_WORK_MEM_SIZE 0x14000
+#define WL1251_PART_WORK_REG_START REGISTERS_BASE
+#define WL1251_PART_WORK_REG_SIZE REGISTERS_WORK_SIZE
#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.c b/drivers/net/wireless/wl12xx/wl1251_acx.c
new file mode 100644
index 0000000..10b26c4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.c
@@ -0,0 +1,918 @@
+#include "wl1251_acx.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_cmd.h"
+#include "wl1251_ps.h"
+
+int wl1251_acx_frame_rates(struct wl1251 *wl, u8 ctrl_rate, u8 ctrl_mod,
+ u8 mgt_rate, u8 mgt_mod)
+{
+ struct acx_fw_gen_frame_rates *rates;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx frame rates");
+
+ rates = kzalloc(sizeof(*rates), GFP_KERNEL);
+ if (!rates) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rates->tx_ctrl_frame_rate = ctrl_rate;
+ rates->tx_ctrl_frame_mod = ctrl_mod;
+ rates->tx_mgt_frame_rate = mgt_rate;
+ rates->tx_mgt_frame_mod = mgt_mod;
+
+ ret = wl1251_cmd_configure(wl, ACX_FW_GEN_FRAME_RATES,
+ rates, sizeof(*rates));
+ if (ret < 0) {
+ wl1251_error("Failed to set FW rates and modulation");
+ goto out;
+ }
+
+out:
+ kfree(rates);
+ return ret;
+}
+
+
+int wl1251_acx_station_id(struct wl1251 *wl)
+{
+ struct acx_dot11_station_id *mac;
+ int ret, i;
+
+ wl1251_debug(DEBUG_ACX, "acx dot11_station_id");
+
+ mac = kzalloc(sizeof(*mac), GFP_KERNEL);
+ if (!mac) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac->mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
+
+ ret = wl1251_cmd_configure(wl, DOT11_STATION_ID, mac, sizeof(*mac));
+ if (ret < 0)
+ goto out;
+
+out:
+ kfree(mac);
+ return ret;
+}
+
+int wl1251_acx_default_key(struct wl1251 *wl, u8 key_id)
+{
+ struct acx_dot11_default_key *default_key;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
+
+ default_key = kzalloc(sizeof(*default_key), GFP_KERNEL);
+ if (!default_key) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ default_key->id = key_id;
+
+ ret = wl1251_cmd_configure(wl, DOT11_DEFAULT_KEY,
+ default_key, sizeof(*default_key));
+ if (ret < 0) {
+ wl1251_error("Couldn't set default key");
+ goto out;
+ }
+
+ wl->default_key = key_id;
+
+out:
+ kfree(default_key);
+ return ret;
+}
+
+int wl1251_acx_wake_up_conditions(struct wl1251 *wl, u8 wake_up_event,
+ u8 listen_interval)
+{
+ struct acx_wake_up_condition *wake_up;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx wake up conditions");
+
+ wake_up = kzalloc(sizeof(*wake_up), GFP_KERNEL);
+ if (!wake_up) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wake_up->wake_up_event = wake_up_event;
+ wake_up->listen_interval = listen_interval;
+
+ ret = wl1251_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS,
+ wake_up, sizeof(*wake_up));
+ if (ret < 0) {
+ wl1251_warning("could not set wake up conditions: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(wake_up);
+ return ret;
+}
+
+int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth)
+{
+ struct acx_sleep_auth *auth;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx sleep auth");
+
+ auth = kzalloc(sizeof(*auth), GFP_KERNEL);
+ if (!auth) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ auth->sleep_auth = sleep_auth;
+
+ ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
+ if (ret < 0)
+ return ret;
+
+out:
+ kfree(auth);
+ return ret;
+}
+
+int wl1251_acx_fw_version(struct wl1251 *wl, char *buf, size_t len)
+{
+ struct acx_revision *rev;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx fw rev");
+
+ rev = kzalloc(sizeof(*rev), GFP_KERNEL);
+ if (!rev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = wl1251_cmd_interrogate(wl, ACX_FW_REV, rev, sizeof(*rev));
+ if (ret < 0) {
+ wl1251_warning("ACX_FW_REV interrogate failed");
+ goto out;
+ }
+
+ /* be careful with the buffer sizes */
+ strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+ /*
+ * if the firmware version string is exactly
+ * sizeof(rev->fw_version) long or fw_len is less than
+ * sizeof(rev->fw_version) it won't be null terminated
+ */
+ buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+out:
+ kfree(rev);
+ return ret;
+}
+
+int wl1251_acx_tx_power(struct wl1251 *wl, int power)
+{
+ struct acx_current_tx_power *acx;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+ if (power < 0 || power > 25)
+ return -EINVAL;
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->current_tx_power = power * 10;
+
+ ret = wl1251_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_warning("configure of tx power failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1251_acx_feature_cfg(struct wl1251 *wl)
+{
+ struct acx_feature_config *feature;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx feature cfg");
+
+ feature = kzalloc(sizeof(*feature), GFP_KERNEL);
+ if (!feature) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+ feature->data_flow_options = 0;
+ feature->options = 0;
+
+ ret = wl1251_cmd_configure(wl, ACX_FEATURE_CFG,
+ feature, sizeof(*feature));
+ if (ret < 0) {
+ wl1251_error("Couldn't set HW encryption");
+ goto out;
+ }
+
+out:
+ kfree(feature);
+ return ret;
+}
+
+int wl1251_acx_mem_map(struct wl1251 *wl, struct acx_header *mem_map,
+ size_t len)
+{
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx mem map");
+
+ ret = wl1251_cmd_interrogate(wl, ACX_MEM_MAP, mem_map, len);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_acx_data_path_params(struct wl1251 *wl,
+ struct acx_data_path_params_resp *resp)
+{
+ struct acx_data_path_params *params;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx data path params");
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ params->rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
+ params->tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
+
+ params->rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
+ params->tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
+
+ params->tx_complete_threshold = 1;
+
+ params->tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
+
+ params->tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
+
+ ret = wl1251_cmd_configure(wl, ACX_DATA_PATH_PARAMS,
+ params, sizeof(*params));
+ if (ret < 0)
+ goto out;
+
+ /* FIXME: shouldn't this be ACX_DATA_PATH_RESP_PARAMS? */
+ ret = wl1251_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
+ resp, sizeof(*resp));
+
+ if (ret < 0) {
+ wl1251_warning("failed to read data path parameters: %d", ret);
+ goto out;
+ } else if (resp->header.cmd.status != CMD_STATUS_SUCCESS) {
+ wl1251_warning("data path parameter acx status failed");
+ ret = -EIO;
+ goto out;
+ }
+
+out:
+ kfree(params);
+ return ret;
+}
+
+int wl1251_acx_rx_msdu_life_time(struct wl1251 *wl, u32 life_time)
+{
+ struct acx_rx_msdu_lifetime *acx;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx rx msdu life time");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->lifetime = life_time;
+ ret = wl1251_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME,
+ acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_warning("failed to set rx msdu life time: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1251_acx_rx_config(struct wl1251 *wl, u32 config, u32 filter)
+{
+ struct acx_rx_config *rx_config;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx rx config");
+
+ rx_config = kzalloc(sizeof(*rx_config), GFP_KERNEL);
+ if (!rx_config) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rx_config->config_options = config;
+ rx_config->filter_options = filter;
+
+ ret = wl1251_cmd_configure(wl, ACX_RX_CFG,
+ rx_config, sizeof(*rx_config));
+ if (ret < 0) {
+ wl1251_warning("failed to set rx config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(rx_config);
+ return ret;
+}
+
+int wl1251_acx_pd_threshold(struct wl1251 *wl)
+{
+ struct acx_packet_detection *pd;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx data pd threshold");
+
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* FIXME: threshold value not set */
+
+ ret = wl1251_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd));
+ if (ret < 0) {
+ wl1251_warning("failed to set pd threshold: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(pd);
+ return 0;
+}
+
+int wl1251_acx_slot(struct wl1251 *wl, enum acx_slot_type slot_time)
+{
+ struct acx_slot *slot;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx slot");
+
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ slot->wone_index = STATION_WONE_INDEX;
+ slot->slot_time = slot_time;
+
+ ret = wl1251_cmd_configure(wl, ACX_SLOT, slot, sizeof(*slot));
+ if (ret < 0) {
+ wl1251_warning("failed to set slot time: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(slot);
+ return ret;
+}
+
+int wl1251_acx_group_address_tbl(struct wl1251 *wl)
+{
+ struct acx_dot11_grp_addr_tbl *acx;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx group address tbl");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* MAC filtering */
+ acx->enabled = 0;
+ acx->num_groups = 0;
+ memset(acx->mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+ ret = wl1251_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL,
+ acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_warning("failed to set group addr table: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1251_acx_service_period_timeout(struct wl1251 *wl)
+{
+ struct acx_rx_timeout *rx_timeout;
+ int ret;
+
+ rx_timeout = kzalloc(sizeof(*rx_timeout), GFP_KERNEL);
+ if (!rx_timeout) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wl1251_debug(DEBUG_ACX, "acx service period timeout");
+
+ rx_timeout->ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+ rx_timeout->upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+ ret = wl1251_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT,
+ rx_timeout, sizeof(*rx_timeout));
+ if (ret < 0) {
+ wl1251_warning("failed to set service period timeout: %d",
+ ret);
+ goto out;
+ }
+
+out:
+ kfree(rx_timeout);
+ return ret;
+}
+
+int wl1251_acx_rts_threshold(struct wl1251 *wl, u16 rts_threshold)
+{
+ struct acx_rts_threshold *rts;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx rts threshold");
+
+ rts = kzalloc(sizeof(*rts), GFP_KERNEL);
+ if (!rts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rts->threshold = rts_threshold;
+
+ ret = wl1251_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
+ if (ret < 0) {
+ wl1251_warning("failed to set rts threshold: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(rts);
+ return ret;
+}
+
+int wl1251_acx_beacon_filter_opt(struct wl1251 *wl)
+{
+ struct acx_beacon_filter_option *beacon_filter;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx beacon filter opt");
+
+ beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL);
+ if (!beacon_filter) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ beacon_filter->enable = 0;
+ beacon_filter->max_num_beacons = 0;
+
+ ret = wl1251_cmd_configure(wl, ACX_BEACON_FILTER_OPT,
+ beacon_filter, sizeof(*beacon_filter));
+ if (ret < 0) {
+ wl1251_warning("failed to set beacon filter opt: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(beacon_filter);
+ return ret;
+}
+
+int wl1251_acx_beacon_filter_table(struct wl1251 *wl)
+{
+ struct acx_beacon_filter_ie_table *ie_table;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx beacon filter table");
+
+ ie_table = kzalloc(sizeof(*ie_table), GFP_KERNEL);
+ if (!ie_table) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ie_table->num_ie = 0;
+ memset(ie_table->table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+
+ ret = wl1251_cmd_configure(wl, ACX_BEACON_FILTER_TABLE,
+ ie_table, sizeof(*ie_table));
+ if (ret < 0) {
+ wl1251_warning("failed to set beacon filter table: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(ie_table);
+ return ret;
+}
+
+int wl1251_acx_sg_enable(struct wl1251 *wl)
+{
+ struct acx_bt_wlan_coex *pta;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx sg enable");
+
+ pta = kzalloc(sizeof(*pta), GFP_KERNEL);
+ if (!pta) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ pta->enable = SG_ENABLE;
+
+ ret = wl1251_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta));
+ if (ret < 0) {
+ wl1251_warning("failed to set softgemini enable: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(pta);
+ return ret;
+}
+
+int wl1251_acx_sg_cfg(struct wl1251 *wl)
+{
+ struct acx_bt_wlan_coex_param *param;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx sg cfg");
+
+ param = kzalloc(sizeof(*param), GFP_KERNEL);
+ if (!param) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* BT-WLAN coext parameters */
+ param->min_rate = RATE_INDEX_24MBPS;
+ param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+ param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+ param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+ param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+ param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+ param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+ param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+ param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+ param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+ param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+ param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+ param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+ param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+ param->antenna_type = PTA_ANTENNA_TYPE_DEF;
+ param->signal_type = PTA_SIGNALING_TYPE_DEF;
+ param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+ param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+ param->max_cts = PTA_MAX_NUM_CTS_DEF;
+ param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+ param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+ param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+ param->wlan_elp_hp = PTA_ELP_HP_DEF;
+ param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+ param->ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+ param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+ param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+ param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+ ret = wl1251_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
+ if (ret < 0) {
+ wl1251_warning("failed to set sg config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(param);
+ return ret;
+}
+
+int wl1251_acx_cca_threshold(struct wl1251 *wl)
+{
+ struct acx_energy_detection *detection;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx cca threshold");
+
+ detection = kzalloc(sizeof(*detection), GFP_KERNEL);
+ if (!detection) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ detection->rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+ detection->tx_energy_detection = 0;
+
+ ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD,
+ detection, sizeof(*detection));
+ if (ret < 0) {
+ wl1251_warning("failed to set cca threshold: %d", ret);
+ return ret;
+ }
+
+out:
+ kfree(detection);
+ return ret;
+}
+
+int wl1251_acx_bcn_dtim_options(struct wl1251 *wl)
+{
+ struct acx_beacon_broadcast *bb;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx bcn dtim options");
+
+ bb = kzalloc(sizeof(*bb), GFP_KERNEL);
+ if (!bb) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ bb->beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+ bb->broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+ bb->rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+ bb->ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+ ret = wl1251_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb));
+ if (ret < 0) {
+ wl1251_warning("failed to set rx config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(bb);
+ return ret;
+}
+
+int wl1251_acx_aid(struct wl1251 *wl, u16 aid)
+{
+ struct acx_aid *acx_aid;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx aid");
+
+ acx_aid = kzalloc(sizeof(*acx_aid), GFP_KERNEL);
+ if (!acx_aid) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx_aid->aid = aid;
+
+ ret = wl1251_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid));
+ if (ret < 0) {
+ wl1251_warning("failed to set aid: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx_aid);
+ return ret;
+}
+
+int wl1251_acx_event_mbox_mask(struct wl1251 *wl, u32 event_mask)
+{
+ struct acx_event_mask *mask;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx event mbox mask");
+
+ mask = kzalloc(sizeof(*mask), GFP_KERNEL);
+ if (!mask) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* high event mask is unused */
+ mask->high_event_mask = 0xffffffff;
+
+ mask->event_mask = event_mask;
+
+ ret = wl1251_cmd_configure(wl, ACX_EVENT_MBOX_MASK,
+ mask, sizeof(*mask));
+ if (ret < 0) {
+ wl1251_warning("failed to set acx_event_mbox_mask: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(mask);
+ return ret;
+}
+
+int wl1251_acx_set_preamble(struct wl1251 *wl, enum acx_preamble_type preamble)
+{
+ struct acx_preamble *acx;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx_set_preamble");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->preamble = preamble;
+
+ ret = wl1251_cmd_configure(wl, ACX_PREAMBLE_TYPE, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_warning("Setting of preamble failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1251_acx_cts_protect(struct wl1251 *wl,
+ enum acx_ctsprotect_type ctsprotect)
+{
+ struct acx_ctsprotect *acx;
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->ctsprotect = ctsprotect;
+
+ ret = wl1251_cmd_configure(wl, ACX_CTS_PROTECTION, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_warning("Setting of ctsprotect failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime)
+{
+ struct acx_tsf_info *tsf_info;
+ int ret;
+
+ tsf_info = kzalloc(sizeof(*tsf_info), GFP_KERNEL);
+ if (!tsf_info) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = wl1251_cmd_interrogate(wl, ACX_TSF_INFO,
+ tsf_info, sizeof(*tsf_info));
+ if (ret < 0) {
+ wl1251_warning("ACX_FW_REV interrogate failed");
+ goto out;
+ }
+
+ *mactime = tsf_info->current_tsf_lsb |
+ (tsf_info->current_tsf_msb << 31);
+
+out:
+ kfree(tsf_info);
+ return ret;
+}
+
+int wl1251_acx_statistics(struct wl1251 *wl, struct acx_statistics *stats)
+{
+ int ret;
+
+ wl1251_debug(DEBUG_ACX, "acx statistics");
+
+ ret = wl1251_cmd_interrogate(wl, ACX_STATISTICS, stats,
+ sizeof(*stats));
+ if (ret < 0) {
+ wl1251_warning("acx statistics failed: %d", ret);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+int wl1251_acx_rate_policies(struct wl1251 *wl)
+{
+ struct acx_rate_policy *acx;
+ int ret = 0;
+
+ wl1251_debug(DEBUG_ACX, "acx rate policies");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* configure one default (one-size-fits-all) rate class */
+ acx->rate_class_cnt = 1;
+ acx->rate_class[0].enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
+ acx->rate_class[0].short_retry_limit = ACX_RATE_RETRY_LIMIT;
+ acx->rate_class[0].long_retry_limit = ACX_RATE_RETRY_LIMIT;
+ acx->rate_class[0].aflags = 0;
+
+ ret = wl1251_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_warning("Setting of rate policies failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1251_acx_mem_cfg(struct wl1251 *wl)
+{
+ struct wl1251_acx_config_memory *mem_conf;
+ int ret, i;
+
+ wl1251_debug(DEBUG_ACX, "acx mem cfg");
+
+ mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL);
+ if (!mem_conf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* memory config */
+ mem_conf->mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+ mem_conf->mem_config.rx_mem_block_num = 35;
+ mem_conf->mem_config.tx_min_mem_block_num = 64;
+ mem_conf->mem_config.num_tx_queues = MAX_TX_QUEUES;
+ mem_conf->mem_config.host_if_options = HOSTIF_PKT_RING;
+ mem_conf->mem_config.num_ssid_profiles = 1;
+ mem_conf->mem_config.debug_buffer_size =
+ cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+ /* RX queue config */
+ mem_conf->rx_queue_config.dma_address = 0;
+ mem_conf->rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+ mem_conf->rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+ mem_conf->rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+ /* TX queue config */
+ for (i = 0; i < MAX_TX_QUEUES; i++) {
+ mem_conf->tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+ mem_conf->tx_queue_config[i].attributes = i;
+ }
+
+ ret = wl1251_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
+ sizeof(*mem_conf));
+ if (ret < 0) {
+ wl1251_warning("wl1251 mem config failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(mem_conf);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.h b/drivers/net/wireless/wl12xx/wl1251_acx.h
new file mode 100644
index 0000000..cafb914
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.h
@@ -0,0 +1,1292 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_ACX_H__
+#define __WL1251_ACX_H__
+
+#include "wl1251.h"
+#include "wl1251_cmd.h"
+
+/* Target's information element */
+struct acx_header {
+ struct wl1251_cmd_header cmd;
+
+ /* acx (or information element) header */
+ u16 id;
+
+ /* payload length (not including headers */
+ u16 len;
+};
+
+struct acx_error_counter {
+ struct acx_header header;
+
+ /* The number of PLCP errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 PLCP_error;
+
+ /* The number of FCS errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 FCS_error;
+
+ /* The number of MPDUs without PLCP header errors received*/
+ /* since the last time this information element was interrogated. */
+ /* This field is automatically cleared when it is interrogated.*/
+ u32 valid_frame;
+
+ /* the number of missed sequence numbers in the squentially */
+ /* values of frames seq numbers */
+ u32 seq_num_miss;
+} __attribute__ ((packed));
+
+struct acx_revision {
+ struct acx_header header;
+
+ /*
+ * The WiLink firmware version, an ASCII string x.x.x.x,
+ * that uniquely identifies the current firmware.
+ * The left most digit is incremented each time a
+ * significant change is made to the firmware, such as
+ * code redesign or new platform support.
+ * The second digit is incremented when major enhancements
+ * are added or major fixes are made.
+ * The third digit is incremented for each GA release.
+ * The fourth digit is incremented for each build.
+ * The first two digits identify a firmware release version,
+ * in other words, a unique set of features.
+ * The first three digits identify a GA release.
+ */
+ char fw_version[20];
+
+ /*
+ * This 4 byte field specifies the WiLink hardware version.
+ * bits 0 - 15: Reserved.
+ * bits 16 - 23: Version ID - The WiLink version ID
+ * (1 = first spin, 2 = second spin, and so on).
+ * bits 24 - 31: Chip ID - The WiLink chip ID.
+ */
+ u32 hw_version;
+} __attribute__ ((packed));
+
+enum wl1251_psm_mode {
+ /* Active mode */
+ WL1251_PSM_CAM = 0,
+
+ /* Power save mode */
+ WL1251_PSM_PS = 1,
+
+ /* Extreme low power */
+ WL1251_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+ struct acx_header header;
+
+ /* The sleep level authorization of the device. */
+ /* 0 - Always active*/
+ /* 1 - Power down mode: light / fast sleep*/
+ /* 2 - ELP mode: Deep / Max sleep*/
+ u8 sleep_auth;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum {
+ HOSTIF_PCI_MASTER_HOST_INDIRECT,
+ HOSTIF_PCI_MASTER_HOST_DIRECT,
+ HOSTIF_SLAVE,
+ HOSTIF_PKT_RING,
+ HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY 0
+#define DEFAULT_RX_Q_PRIORITY 0
+#define DEFAULT_NUM_STATIONS 1
+#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */
+#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE 256
+
+#define DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_RX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_COMPLETE_TIME_OUT 20
+#define FW_TX_CMPLT_BLOCK_SIZE 16
+
+struct acx_data_path_params {
+ struct acx_header header;
+
+ u16 rx_packet_ring_chunk_size;
+ u16 tx_packet_ring_chunk_size;
+
+ u8 rx_packet_ring_chunk_num;
+ u8 tx_packet_ring_chunk_num;
+
+ /*
+ * Maximum number of packets that can be gathered
+ * in the TX complete ring before an interrupt
+ * is generated.
+ */
+ u8 tx_complete_threshold;
+
+ /* Number of pending TX complete entries in cyclic ring.*/
+ u8 tx_complete_ring_depth;
+
+ /*
+ * Max num microseconds since a packet enters the TX
+ * complete ring until an interrupt is generated.
+ */
+ u32 tx_complete_timeout;
+} __attribute__ ((packed));
+
+
+struct acx_data_path_params_resp {
+ struct acx_header header;
+
+ u16 rx_packet_ring_chunk_size;
+ u16 tx_packet_ring_chunk_size;
+
+ u8 rx_packet_ring_chunk_num;
+ u8 tx_packet_ring_chunk_num;
+
+ u8 pad[2];
+
+ u32 rx_packet_ring_addr;
+ u32 tx_packet_ring_addr;
+
+ u32 rx_control_addr;
+ u32 tx_control_addr;
+
+ u32 tx_complete_addr;
+} __attribute__ ((packed));
+
+#define TX_MSDU_LIFETIME_MIN 0
+#define TX_MSDU_LIFETIME_MAX 3000
+#define TX_MSDU_LIFETIME_DEF 512
+#define RX_MSDU_LIFETIME_MIN 0
+#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF 512000
+
+struct acx_rx_msdu_lifetime {
+ struct acx_header header;
+
+ /*
+ * The maximum amount of time, in TU, before the
+ * firmware discards the MSDU.
+ */
+ u32 lifetime;
+} __attribute__ ((packed));
+
+/*
+ * RX Config Options Table
+ * Bit Definition
+ * === ==========
+ * 31:14 Reserved
+ * 13 Copy RX Status - when set, write three receive status words
+ * to top of rx'd MPDUs.
+ * When cleared, do not write three status words (added rev 1.5)
+ * 12 Reserved
+ * 11 RX Complete upon FCS error - when set, give rx complete
+ * interrupt for FCS errors, after the rx filtering, e.g. unicast
+ * frames not to us with FCS error will not generate an interrupt.
+ * 10 SSID Filter Enable - When set, the WiLink discards all beacon,
+ * probe request, and probe response frames with an SSID that does
+ * not match the SSID specified by the host in the START/JOIN
+ * command.
+ * When clear, the WiLink receives frames with any SSID.
+ * 9 Broadcast Filter Enable - When set, the WiLink discards all
+ * broadcast frames. When clear, the WiLink receives all received
+ * broadcast frames.
+ * 8:6 Reserved
+ * 5 BSSID Filter Enable - When set, the WiLink discards any frames
+ * with a BSSID that does not match the BSSID specified by the
+ * host.
+ * When clear, the WiLink receives frames from any BSSID.
+ * 4 MAC Addr Filter - When set, the WiLink discards any frames
+ * with a destination address that does not match the MAC address
+ * of the adaptor.
+ * When clear, the WiLink receives frames destined to any MAC
+ * address.
+ * 3 Promiscuous - When set, the WiLink receives all valid frames
+ * (i.e., all frames that pass the FCS check).
+ * When clear, only frames that pass the other filters specified
+ * are received.
+ * 2 FCS - When set, the WiLink includes the FCS with the received
+ * frame.
+ * When cleared, the FCS is discarded.
+ * 1 PLCP header - When set, write all data from baseband to frame
+ * buffer including PHY header.
+ * 0 Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit Definition
+ * === ==========
+ * 31:12 Reserved - Always equal to 0.
+ * 11 Association - When set, the WiLink receives all association
+ * related frames (association request/response, reassocation
+ * request/response, and disassociation). When clear, these frames
+ * are discarded.
+ * 10 Auth/De auth - When set, the WiLink receives all authentication
+ * and de-authentication frames. When clear, these frames are
+ * discarded.
+ * 9 Beacon - When set, the WiLink receives all beacon frames.
+ * When clear, these frames are discarded.
+ * 8 Contention Free - When set, the WiLink receives all contention
+ * free frames.
+ * When clear, these frames are discarded.
+ * 7 Control - When set, the WiLink receives all control frames.
+ * When clear, these frames are discarded.
+ * 6 Data - When set, the WiLink receives all data frames.
+ * When clear, these frames are discarded.
+ * 5 FCS Error - When set, the WiLink receives frames that have FCS
+ * errors.
+ * When clear, these frames are discarded.
+ * 4 Management - When set, the WiLink receives all management
+ * frames.
+ * When clear, these frames are discarded.
+ * 3 Probe Request - When set, the WiLink receives all probe request
+ * frames.
+ * When clear, these frames are discarded.
+ * 2 Probe Response - When set, the WiLink receives all probe
+ * response frames.
+ * When clear, these frames are discarded.
+ * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * frames.
+ * When clear, these frames are discarded.
+ * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * that have reserved frame types and sub types as defined by the
+ * 802.11 specification.
+ * When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+ struct acx_header header;
+
+ u32 config_options;
+ u32 filter_options;
+} __attribute__ ((packed));
+
+enum {
+ QOS_AC_BE = 0,
+ QOS_AC_BK,
+ QOS_AC_VI,
+ QOS_AC_VO,
+ QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
+};
+
+#define MAX_NUM_OF_AC (QOS_HIGHEST_AC_INDEX+1)
+#define FIRST_AC_INDEX QOS_AC_BE
+#define MAX_NUM_OF_802_1d_TAGS 8
+#define AC_PARAMS_MAX_TSID 15
+#define MAX_APSD_CONF 0xffff
+
+#define QOS_TX_HIGH_MIN (0)
+#define QOS_TX_HIGH_MAX (100)
+
+#define QOS_TX_HIGH_BK_DEF (25)
+#define QOS_TX_HIGH_BE_DEF (35)
+#define QOS_TX_HIGH_VI_DEF (35)
+#define QOS_TX_HIGH_VO_DEF (35)
+
+#define QOS_TX_LOW_BK_DEF (15)
+#define QOS_TX_LOW_BE_DEF (25)
+#define QOS_TX_LOW_VI_DEF (25)
+#define QOS_TX_LOW_VO_DEF (25)
+
+struct acx_tx_queue_qos_config {
+ struct acx_header header;
+
+ u8 qid;
+ u8 pad[3];
+
+ /* Max number of blocks allowd in the queue */
+ u16 high_threshold;
+
+ /* Lowest memory blocks guaranteed for this queue */
+ u16 low_threshold;
+} __attribute__ ((packed));
+
+struct acx_packet_detection {
+ struct acx_header header;
+
+ u32 threshold;
+} __attribute__ ((packed));
+
+
+enum acx_slot_type {
+ SLOT_TIME_LONG = 0,
+ SLOT_TIME_SHORT = 1,
+ DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+ MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+ struct acx_header header;
+
+ u8 wone_index; /* Reserved */
+ u8 slot_time;
+ u8 reserved[6];
+} __attribute__ ((packed));
+
+
+#define ADDRESS_GROUP_MAX (8)
+#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct acx_dot11_grp_addr_tbl {
+ struct acx_header header;
+
+ u8 enabled;
+ u8 num_groups;
+ u8 pad[2];
+ u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __attribute__ ((packed));
+
+
+#define RX_TIMEOUT_PS_POLL_MIN 0
+#define RX_TIMEOUT_PS_POLL_MAX (200000)
+#define RX_TIMEOUT_PS_POLL_DEF (15)
+#define RX_TIMEOUT_UPSD_MIN 0
+#define RX_TIMEOUT_UPSD_MAX (200000)
+#define RX_TIMEOUT_UPSD_DEF (15)
+
+struct acx_rx_timeout {
+ struct acx_header header;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a PS-poll has been
+ * transmitted.
+ */
+ u16 ps_poll_timeout;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a frame has been sent
+ * from an UPSD enabled queue.
+ */
+ u16 upsd_timeout;
+} __attribute__ ((packed));
+
+#define RTS_THRESHOLD_MIN 0
+#define RTS_THRESHOLD_MAX 4096
+#define RTS_THRESHOLD_DEF 2347
+
+struct acx_rts_threshold {
+ struct acx_header header;
+
+ u16 threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_beacon_filter_option {
+ struct acx_header header;
+
+ u8 enable;
+
+ /*
+ * The number of beacons without the unicast TIM
+ * bit set that the firmware buffers before
+ * signaling the host about ready frames.
+ * When set to 0 and the filter is enabled, beacons
+ * without the unicast TIM bit set are dropped.
+ */
+ u8 max_num_beacons;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ * 2 3 OUI
+ * 5 1 Type
+ * 6 2 Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define BEACON_FILTER_TABLE_MAX_IE_NUM (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+ BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+ (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+ BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+struct acx_beacon_filter_ie_table {
+ struct acx_header header;
+
+ u8 num_ie;
+ u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+ u8 pad[3];
+} __attribute__ ((packed));
+
+enum {
+ SG_ENABLE = 0,
+ SG_DISABLE,
+ SG_SENSE_NO_ACTIVITY,
+ SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+ struct acx_header header;
+
+ /*
+ * 0 -> PTA enabled
+ * 1 -> PTA disabled
+ * 2 -> sense no active mode, i.e.
+ * an interrupt is sent upon
+ * BT activity.
+ * 3 -> PTA is switched on in response
+ * to the interrupt sending.
+ */
+ u8 enable;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+#define PTA_ANTENNA_TYPE_DEF (0)
+#define PTA_BT_HP_MAXTIME_DEF (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF (1)
+#define PTA_AFH_LEVERAGE_ON_DEF (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF (0)
+#define PTA_MAX_NUM_CTS_DEF (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000)
+#define PTA_CYCLE_TIME_FAST_DEF (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF (5)
+#define PTA_ELP_HP_DEF (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4)
+#define PTA_ALLOW_PA_SD_DEF (1)
+#define PTA_TIME_BEFORE_BEACON_DEF (6300)
+#define PTA_HPDM_MAX_TIME_DEF (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF (0)
+#define PTA_BT_HP_RESPECTED_DEF (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF (24)
+#define PTA_ACK_MODE_DEF (1)
+
+struct acx_bt_wlan_coex_param {
+ struct acx_header header;
+
+ /*
+ * The minimum rate of a received WLAN packet in the STA,
+ * during protective mode, of which a new BT-HP request
+ * during this Rx will always be respected and gain the antenna.
+ */
+ u32 min_rate;
+
+ /* Max time the BT HP will be respected. */
+ u16 bt_hp_max_time;
+
+ /* Max time the WLAN HP will be respected. */
+ u16 wlan_hp_max_time;
+
+ /*
+ * The time between the last BT activity
+ * and the moment when the sense mode returns
+ * to SENSE_INACTIVE.
+ */
+ u16 sense_disable_timer;
+
+ /* Time before the next BT HP instance */
+ u16 rx_time_bt_hp;
+ u16 tx_time_bt_hp;
+
+ /* range: 10-20000 default: 1500 */
+ u16 rx_time_bt_hp_fast;
+ u16 tx_time_bt_hp_fast;
+
+ /* range: 2000-65535 default: 8700 */
+ u16 wlan_cycle_fast;
+
+ /* range: 0 - 15000 (Msec) default: 1000 */
+ u16 bt_anti_starvation_period;
+
+ /* range 400-10000(Usec) default: 3000 */
+ u16 next_bt_lp_packet;
+
+ /* Deafult: worst case for BT DH5 traffic */
+ u16 wake_up_beacon;
+
+ /* range: 0-50000(Usec) default: 1050 */
+ u16 hp_dm_max_guard_time;
+
+ /*
+ * This is to prevent both BT & WLAN antenna
+ * starvation.
+ * Range: 100-50000(Usec) default:2550
+ */
+ u16 next_wlan_packet;
+
+ /* 0 -> shared antenna */
+ u8 antenna_type;
+
+ /*
+ * 0 -> TI legacy
+ * 1 -> Palau
+ */
+ u8 signal_type;
+
+ /*
+ * BT AFH status
+ * 0 -> no AFH
+ * 1 -> from dedicated GPIO
+ * 2 -> AFH on (from host)
+ */
+ u8 afh_leverage_on;
+
+ /*
+ * The number of cycles during which no
+ * TX will be sent after 1 cycle of RX
+ * transaction in protective mode
+ */
+ u8 quiet_cycle_num;
+
+ /*
+ * The maximum number of CTSs that will
+ * be sent for receiving RX packet in
+ * protective mode
+ */
+ u8 max_cts;
+
+ /*
+ * The number of WLAN packets
+ * transferred in common mode before
+ * switching to BT.
+ */
+ u8 wlan_packets_num;
+
+ /*
+ * The number of BT packets
+ * transferred in common mode before
+ * switching to WLAN.
+ */
+ u8 bt_packets_num;
+
+ /* range: 1-255 default: 5 */
+ u8 missed_rx_avalanche;
+
+ /* range: 0-1 default: 1 */
+ u8 wlan_elp_hp;
+
+ /* range: 0 - 15 default: 4 */
+ u8 bt_anti_starvation_cycles;
+
+ u8 ack_mode_dual_ant;
+
+ /*
+ * Allow PA_SD assertion/de-assertion
+ * during enabled BT activity.
+ */
+ u8 pa_sd_enable;
+
+ /*
+ * Enable/Disable PTA in auto mode:
+ * Support Both Active & P.S modes
+ */
+ u8 pta_auto_mode_enable;
+
+ /* range: 0 - 20 default: 1 */
+ u8 bt_hp_respected_num;
+} __attribute__ ((packed));
+
+#define CCA_THRSH_ENABLE_ENERGY_D 0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D 0xFFEF
+
+struct acx_energy_detection {
+ struct acx_header header;
+
+ /* The RX Clear Channel Assessment threshold in the PHY */
+ u16 rx_cca_threshold;
+ u8 tx_energy_detection;
+ u8 pad;
+} __attribute__ ((packed));
+
+#define BCN_RX_TIMEOUT_DEF_VALUE 10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE 20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE 1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+ struct acx_header header;
+
+ u16 beacon_rx_timeout;
+ u16 broadcast_timeout;
+
+ /* Enables receiving of broadcast packets in PS mode */
+ u8 rx_broadcast_in_ps;
+
+ /* Consecutive PS Poll failures before updating the host */
+ u8 ps_poll_threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_event_mask {
+ struct acx_header header;
+
+ u32 event_mask;
+ u32 high_event_mask; /* Unused */
+} __attribute__ ((packed));
+
+#define CFG_RX_FCS BIT(2)
+#define CFG_RX_ALL_GOOD BIT(3)
+#define CFG_UNI_FILTER_EN BIT(4)
+#define CFG_BSSID_FILTER_EN BIT(5)
+#define CFG_MC_FILTER_EN BIT(6)
+#define CFG_MC_ADDR0_EN BIT(7)
+#define CFG_MC_ADDR1_EN BIT(8)
+#define CFG_BC_REJECT_EN BIT(9)
+#define CFG_SSID_FILTER_EN BIT(10)
+#define CFG_RX_INT_FCS_ERROR BIT(11)
+#define CFG_RX_INT_ENCRYPTED BIT(12)
+#define CFG_RX_WR_RX_STATUS BIT(13)
+#define CFG_RX_FILTER_NULTI BIT(14)
+#define CFG_RX_RESERVE BIT(15)
+#define CFG_RX_TIMESTAMP_TSF BIT(16)
+
+#define CFG_RX_RSV_EN BIT(0)
+#define CFG_RX_RCTS_ACK BIT(1)
+#define CFG_RX_PRSP_EN BIT(2)
+#define CFG_RX_PREQ_EN BIT(3)
+#define CFG_RX_MGMT_EN BIT(4)
+#define CFG_RX_FCS_ERROR BIT(5)
+#define CFG_RX_DATA_EN BIT(6)
+#define CFG_RX_CTL_EN BIT(7)
+#define CFG_RX_CF_EN BIT(8)
+#define CFG_RX_BCN_EN BIT(9)
+#define CFG_RX_AUTH_EN BIT(10)
+#define CFG_RX_ASSOC_EN BIT(11)
+
+#define SCAN_PASSIVE BIT(0)
+#define SCAN_5GHZ_BAND BIT(1)
+#define SCAN_TRIGGERED BIT(2)
+#define SCAN_PRIORITY_HIGH BIT(3)
+
+struct acx_fw_gen_frame_rates {
+ struct acx_header header;
+
+ u8 tx_ctrl_frame_rate; /* RATE_* */
+ u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
+ u8 tx_mgt_frame_rate;
+ u8 tx_mgt_frame_mod;
+} __attribute__ ((packed));
+
+/* STA MAC */
+struct acx_dot11_station_id {
+ struct acx_header header;
+
+ u8 mac[ETH_ALEN];
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_feature_config {
+ struct acx_header header;
+
+ u32 options;
+ u32 data_flow_options;
+} __attribute__ ((packed));
+
+struct acx_current_tx_power {
+ struct acx_header header;
+
+ u8 current_tx_power;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_dot11_default_key {
+ struct acx_header header;
+
+ u8 id;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+struct acx_tsf_info {
+ struct acx_header header;
+
+ u32 current_tsf_msb;
+ u32 current_tsf_lsb;
+ u32 last_TBTT_msb;
+ u32 last_TBTT_lsb;
+ u8 last_dtim_count;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+enum acx_wake_up_event {
+ WAKE_UP_EVENT_BEACON_BITMAP = 0x01, /* Wake on every Beacon*/
+ WAKE_UP_EVENT_DTIM_BITMAP = 0x02, /* Wake on every DTIM*/
+ WAKE_UP_EVENT_N_DTIM_BITMAP = 0x04, /* Wake on every Nth DTIM */
+ WAKE_UP_EVENT_N_BEACONS_BITMAP = 0x08, /* Wake on every Nth Beacon */
+ WAKE_UP_EVENT_BITS_MASK = 0x0F
+};
+
+struct acx_wake_up_condition {
+ struct acx_header header;
+
+ u8 wake_up_event; /* Only one bit can be set */
+ u8 listen_interval;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_aid {
+ struct acx_header header;
+
+ /*
+ * To be set when associated with an AP.
+ */
+ u16 aid;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_preamble_type {
+ ACX_PREAMBLE_LONG = 0,
+ ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+ struct acx_header header;
+
+ /*
+ * When set, the WiLink transmits the frames with a short preamble and
+ * when cleared, the WiLink transmits the frames with a long preamble.
+ */
+ u8 preamble;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_ctsprotect_type {
+ CTSPROTECT_DISABLE = 0,
+ CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+ struct acx_header header;
+ u8 ctsprotect;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_tx_statistics {
+ u32 internal_desc_overflow;
+} __attribute__ ((packed));
+
+struct acx_rx_statistics {
+ u32 out_of_mem;
+ u32 hdr_overflow;
+ u32 hw_stuck;
+ u32 dropped;
+ u32 fcs_err;
+ u32 xfr_hint_trig;
+ u32 path_reset;
+ u32 reset_counter;
+} __attribute__ ((packed));
+
+struct acx_dma_statistics {
+ u32 rx_requested;
+ u32 rx_errors;
+ u32 tx_requested;
+ u32 tx_errors;
+} __attribute__ ((packed));
+
+struct acx_isr_statistics {
+ /* host command complete */
+ u32 cmd_cmplt;
+
+ /* fiqisr() */
+ u32 fiqs;
+
+ /* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+ u32 rx_headers;
+
+ /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+ u32 rx_completes;
+
+ /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+ u32 rx_mem_overflow;
+
+ /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+ u32 rx_rdys;
+
+ /* irqisr() */
+ u32 irqs;
+
+ /* (INT_STS_ND & INT_TRIG_TX_PROC) */
+ u32 tx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+ u32 decrypt_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA0) */
+ u32 dma0_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA1) */
+ u32 dma1_done;
+
+ /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+ u32 tx_exch_complete;
+
+ /* (INT_STS_ND & INT_TRIG_COMMAND) */
+ u32 commands;
+
+ /* (INT_STS_ND & INT_TRIG_RX_PROC) */
+ u32 rx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_PM_802) */
+ u32 hw_pm_mode_changes;
+
+ /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+ u32 host_acknowledges;
+
+ /* (INT_STS_ND & INT_TRIG_PM_PCI) */
+ u32 pci_pm;
+
+ /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+ u32 wakeups;
+
+ /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+ u32 low_rssi;
+} __attribute__ ((packed));
+
+struct acx_wep_statistics {
+ /* WEP address keys configured */
+ u32 addr_key_count;
+
+ /* default keys configured */
+ u32 default_key_count;
+
+ u32 reserved;
+
+ /* number of times that WEP key not found on lookup */
+ u32 key_not_found;
+
+ /* number of times that WEP key decryption failed */
+ u32 decrypt_fail;
+
+ /* WEP packets decrypted */
+ u32 packets;
+
+ /* WEP decrypt interrupts */
+ u32 interrupt;
+} __attribute__ ((packed));
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+ /* the amount of enters into power save mode (both PD & ELP) */
+ u32 ps_enter;
+
+ /* the amount of enters into ELP mode */
+ u32 elp_enter;
+
+ /* the amount of missing beacon interrupts to the host */
+ u32 missing_bcns;
+
+ /* the amount of wake on host-access times */
+ u32 wake_on_host;
+
+ /* the amount of wake on timer-expire */
+ u32 wake_on_timer_exp;
+
+ /* the number of packets that were transmitted with PS bit set */
+ u32 tx_with_ps;
+
+ /* the number of packets that were transmitted with PS bit clear */
+ u32 tx_without_ps;
+
+ /* the number of received beacons */
+ u32 rcvd_beacons;
+
+ /* the number of entering into PowerOn (power save off) */
+ u32 power_save_off;
+
+ /* the number of entries into power save mode */
+ u16 enable_ps;
+
+ /*
+ * the number of exits from power save, not including failed PS
+ * transitions
+ */
+ u16 disable_ps;
+
+ /*
+ * the number of times the TSF counter was adjusted because
+ * of drift
+ */
+ u32 fix_tsf_ps;
+
+ /* Gives statistics about the spread continuous missed beacons.
+ * The 16 LSB are dedicated for the PS mode.
+ * The 16 MSB are dedicated for the PS mode.
+ * cont_miss_bcns_spread[0] - single missed beacon.
+ * cont_miss_bcns_spread[1] - two continuous missed beacons.
+ * cont_miss_bcns_spread[2] - three continuous missed beacons.
+ * ...
+ * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+ */
+ u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+ /* the number of beacons in awake mode */
+ u32 rcvd_awake_beacons;
+} __attribute__ ((packed));
+
+struct acx_mic_statistics {
+ u32 rx_pkts;
+ u32 calc_failure;
+} __attribute__ ((packed));
+
+struct acx_aes_statistics {
+ u32 encrypt_fail;
+ u32 decrypt_fail;
+ u32 encrypt_packets;
+ u32 decrypt_packets;
+ u32 encrypt_interrupt;
+ u32 decrypt_interrupt;
+} __attribute__ ((packed));
+
+struct acx_event_statistics {
+ u32 heart_beat;
+ u32 calibration;
+ u32 rx_mismatch;
+ u32 rx_mem_empty;
+ u32 rx_pool;
+ u32 oom_late;
+ u32 phy_transmit_error;
+ u32 tx_stuck;
+} __attribute__ ((packed));
+
+struct acx_ps_statistics {
+ u32 pspoll_timeouts;
+ u32 upsd_timeouts;
+ u32 upsd_max_sptime;
+ u32 upsd_max_apturn;
+ u32 pspoll_max_apturn;
+ u32 pspoll_utilization;
+ u32 upsd_utilization;
+} __attribute__ ((packed));
+
+struct acx_rxpipe_statistics {
+ u32 rx_prep_beacon_drop;
+ u32 descr_host_int_trig_rx_data;
+ u32 beacon_buffer_thres_host_int_trig_rx_data;
+ u32 missed_beacon_host_int_trig_rx_data;
+ u32 tx_xfr_host_int_trig_rx_data;
+} __attribute__ ((packed));
+
+struct acx_statistics {
+ struct acx_header header;
+
+ struct acx_tx_statistics tx;
+ struct acx_rx_statistics rx;
+ struct acx_dma_statistics dma;
+ struct acx_isr_statistics isr;
+ struct acx_wep_statistics wep;
+ struct acx_pwr_statistics pwr;
+ struct acx_aes_statistics aes;
+ struct acx_mic_statistics mic;
+ struct acx_event_statistics event;
+ struct acx_ps_statistics ps;
+ struct acx_rxpipe_statistics rxpipe;
+} __attribute__ ((packed));
+
+#define ACX_MAX_RATE_CLASSES 8
+#define ACX_RATE_MASK_UNSPECIFIED 0
+#define ACX_RATE_RETRY_LIMIT 10
+
+struct acx_rate_class {
+ u32 enabled_rates;
+ u8 short_retry_limit;
+ u8 long_retry_limit;
+ u8 aflags;
+ u8 reserved;
+};
+
+struct acx_rate_policy {
+ struct acx_header header;
+
+ u32 rate_class_cnt;
+ struct acx_rate_class rate_class[ACX_MAX_RATE_CLASSES];
+} __attribute__ ((packed));
+
+struct wl1251_acx_memory {
+ __le16 num_stations; /* number of STAs to be supported. */
+ u16 reserved_1;
+
+ /*
+ * Nmber of memory buffers for the RX mem pool.
+ * The actual number may be less if there are
+ * not enough blocks left for the minimum num
+ * of TX ones.
+ */
+ u8 rx_mem_block_num;
+ u8 reserved_2;
+ u8 num_tx_queues; /* From 1 to 16 */
+ u8 host_if_options; /* HOST_IF* */
+ u8 tx_min_mem_block_num;
+ u8 num_ssid_profiles;
+ __le16 debug_buffer_size;
+} __attribute__ ((packed));
+
+
+#define ACX_RX_DESC_MIN 1
+#define ACX_RX_DESC_MAX 127
+#define ACX_RX_DESC_DEF 32
+struct wl1251_acx_rx_queue_config {
+ u8 num_descs;
+ u8 pad;
+ u8 type;
+ u8 priority;
+ __le32 dma_address;
+} __attribute__ ((packed));
+
+#define ACX_TX_DESC_MIN 1
+#define ACX_TX_DESC_MAX 127
+#define ACX_TX_DESC_DEF 16
+struct wl1251_acx_tx_queue_config {
+ u8 num_descs;
+ u8 pad[2];
+ u8 attributes;
+} __attribute__ ((packed));
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+ struct acx_header header;
+
+ struct wl1251_acx_memory mem_config;
+ struct wl1251_acx_rx_queue_config rx_queue_config;
+ struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __attribute__ ((packed));
+
+struct wl1251_acx_mem_map {
+ struct acx_header header;
+
+ void *code_start;
+ void *code_end;
+
+ void *wep_defkey_start;
+ void *wep_defkey_end;
+
+ void *sta_table_start;
+ void *sta_table_end;
+
+ void *packet_template_start;
+ void *packet_template_end;
+
+ void *queue_memory_start;
+ void *queue_memory_end;
+
+ void *packet_memory_pool_start;
+ void *packet_memory_pool_end;
+
+ void *debug_buffer1_start;
+ void *debug_buffer1_end;
+
+ void *debug_buffer2_start;
+ void *debug_buffer2_end;
+
+ /* Number of blocks FW allocated for TX packets */
+ u32 num_tx_mem_blocks;
+
+ /* Number of blocks FW allocated for RX packets */
+ u32 num_rx_mem_blocks;
+} __attribute__ ((packed));
+
+/*************************************************************************
+
+ Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6)
+
+/* Trace meassge on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A BIT(7)
+
+/* Trace meassge on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14)
+
+#define WL1251_ACX_INTR_ALL 0xFFFFFFFF
+
+enum {
+ ACX_WAKE_UP_CONDITIONS = 0x0002,
+ ACX_MEM_CFG = 0x0003,
+ ACX_SLOT = 0x0004,
+ ACX_QUEUE_HEAD = 0x0005, /* for MASTER mode only */
+ ACX_AC_CFG = 0x0007,
+ ACX_MEM_MAP = 0x0008,
+ ACX_AID = 0x000A,
+ ACX_RADIO_PARAM = 0x000B, /* Not used */
+ ACX_CFG = 0x000C, /* Not used */
+ ACX_FW_REV = 0x000D,
+ ACX_MEDIUM_USAGE = 0x000F,
+ ACX_RX_CFG = 0x0010,
+ ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */
+ ACX_BSS_IN_PS = 0x0012, /* for AP only */
+ ACX_STATISTICS = 0x0013, /* Debug API */
+ ACX_FEATURE_CFG = 0x0015,
+ ACX_MISC_CFG = 0x0017, /* Not used */
+ ACX_TID_CFG = 0x001A,
+ ACX_BEACON_FILTER_OPT = 0x001F,
+ ACX_LOW_RSSI = 0x0020,
+ ACX_NOISE_HIST = 0x0021,
+ ACX_HDK_VERSION = 0x0022, /* ??? */
+ ACX_PD_THRESHOLD = 0x0023,
+ ACX_DATA_PATH_PARAMS = 0x0024, /* WO */
+ ACX_DATA_PATH_RESP_PARAMS = 0x0024, /* RO */
+ ACX_CCA_THRESHOLD = 0x0025,
+ ACX_EVENT_MBOX_MASK = 0x0026,
+#ifdef FW_RUNNING_AS_AP
+ ACX_DTIM_PERIOD = 0x0027, /* for AP only */
+#else
+ ACX_WR_TBTT_AND_DTIM = 0x0027, /* STA only */
+#endif
+ ACX_ACI_OPTION_CFG = 0x0029, /* OBSOLETE (for 1251)*/
+ ACX_GPIO_CFG = 0x002A, /* Not used */
+ ACX_GPIO_SET = 0x002B, /* Not used */
+ ACX_PM_CFG = 0x002C, /* To Be Documented */
+ ACX_CONN_MONIT_PARAMS = 0x002D,
+ ACX_AVERAGE_RSSI = 0x002E, /* Not used */
+ ACX_CONS_TX_FAILURE = 0x002F,
+ ACX_BCN_DTIM_OPTIONS = 0x0031,
+ ACX_SG_ENABLE = 0x0032,
+ ACX_SG_CFG = 0x0033,
+ ACX_ANTENNA_DIVERSITY_CFG = 0x0035, /* To Be Documented */
+ ACX_LOW_SNR = 0x0037, /* To Be Documented */
+ ACX_BEACON_FILTER_TABLE = 0x0038,
+ ACX_ARP_IP_FILTER = 0x0039,
+ ACX_ROAMING_STATISTICS_TBL = 0x003B,
+ ACX_RATE_POLICY = 0x003D,
+ ACX_CTS_PROTECTION = 0x003E,
+ ACX_SLEEP_AUTH = 0x003F,
+ ACX_PREAMBLE_TYPE = 0x0040,
+ ACX_ERROR_CNT = 0x0041,
+ ACX_FW_GEN_FRAME_RATES = 0x0042,
+ ACX_IBSS_FILTER = 0x0044,
+ ACX_SERVICE_PERIOD_TIMEOUT = 0x0045,
+ ACX_TSF_INFO = 0x0046,
+ ACX_CONFIG_PS_WMM = 0x0049,
+ ACX_ENABLE_RX_DATA_FILTER = 0x004A,
+ ACX_SET_RX_DATA_FILTER = 0x004B,
+ ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+ ACX_POWER_LEVEL_TABLE = 0x004D,
+ ACX_BET_ENABLE = 0x0050,
+ DOT11_STATION_ID = 0x1001,
+ DOT11_RX_MSDU_LIFE_TIME = 0x1004,
+ DOT11_CUR_TX_PWR = 0x100D,
+ DOT11_DEFAULT_KEY = 0x1010,
+ DOT11_RX_DOT11_MODE = 0x1012,
+ DOT11_RTS_THRESHOLD = 0x1013,
+ DOT11_GROUP_ADDRESS_TBL = 0x1014,
+
+ MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+ MAX_IE = 0xFFFF
+};
+
+
+int wl1251_acx_frame_rates(struct wl1251 *wl, u8 ctrl_rate, u8 ctrl_mod,
+ u8 mgt_rate, u8 mgt_mod);
+int wl1251_acx_station_id(struct wl1251 *wl);
+int wl1251_acx_default_key(struct wl1251 *wl, u8 key_id);
+int wl1251_acx_wake_up_conditions(struct wl1251 *wl, u8 wake_up_event,
+ u8 listen_interval);
+int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth);
+int wl1251_acx_fw_version(struct wl1251 *wl, char *buf, size_t len);
+int wl1251_acx_tx_power(struct wl1251 *wl, int power);
+int wl1251_acx_feature_cfg(struct wl1251 *wl);
+int wl1251_acx_mem_map(struct wl1251 *wl,
+ struct acx_header *mem_map, size_t len);
+int wl1251_acx_data_path_params(struct wl1251 *wl,
+ struct acx_data_path_params_resp *data_path);
+int wl1251_acx_rx_msdu_life_time(struct wl1251 *wl, u32 life_time);
+int wl1251_acx_rx_config(struct wl1251 *wl, u32 config, u32 filter);
+int wl1251_acx_pd_threshold(struct wl1251 *wl);
+int wl1251_acx_slot(struct wl1251 *wl, enum acx_slot_type slot_time);
+int wl1251_acx_group_address_tbl(struct wl1251 *wl);
+int wl1251_acx_service_period_timeout(struct wl1251 *wl);
+int wl1251_acx_rts_threshold(struct wl1251 *wl, u16 rts_threshold);
+int wl1251_acx_beacon_filter_opt(struct wl1251 *wl);
+int wl1251_acx_beacon_filter_table(struct wl1251 *wl);
+int wl1251_acx_sg_enable(struct wl1251 *wl);
+int wl1251_acx_sg_cfg(struct wl1251 *wl);
+int wl1251_acx_cca_threshold(struct wl1251 *wl);
+int wl1251_acx_bcn_dtim_options(struct wl1251 *wl);
+int wl1251_acx_aid(struct wl1251 *wl, u16 aid);
+int wl1251_acx_event_mbox_mask(struct wl1251 *wl, u32 event_mask);
+int wl1251_acx_set_preamble(struct wl1251 *wl, enum acx_preamble_type preamble);
+int wl1251_acx_cts_protect(struct wl1251 *wl,
+ enum acx_ctsprotect_type ctsprotect);
+int wl1251_acx_statistics(struct wl1251 *wl, struct acx_statistics *stats);
+int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime);
+int wl1251_acx_rate_policies(struct wl1251 *wl);
+int wl1251_acx_mem_cfg(struct wl1251 *wl);
+
+#endif /* __WL1251_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
new file mode 100644
index 0000000..452d748
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -0,0 +1,530 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+
+#include "wl1251_reg.h"
+#include "wl1251_boot.h"
+#include "wl1251_io.h"
+#include "wl1251_spi.h"
+#include "wl1251_event.h"
+#include "wl1251_acx.h"
+
+void wl1251_boot_target_enable_interrupts(struct wl1251 *wl)
+{
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+ wl1251_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+int wl1251_boot_soft_reset(struct wl1251 *wl)
+{
+ unsigned long timeout;
+ u32 boot_data;
+
+ /* perform soft reset */
+ wl1251_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+ /* SOFT_RESET is self clearing */
+ timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+ while (1) {
+ boot_data = wl1251_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+ wl1251_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+ if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ /* 1.2 check pWhalBus->uSelfClearTime if the
+ * timeout was reached */
+ wl1251_error("soft reset timeout");
+ return -1;
+ }
+
+ udelay(SOFT_RESET_STALL_TIME);
+ }
+
+ /* disable Rx/Tx */
+ wl1251_reg_write32(wl, ENABLE, 0x0);
+
+ /* disable auto calibration on start*/
+ wl1251_reg_write32(wl, SPARE_A2, 0xffff);
+
+ return 0;
+}
+
+int wl1251_boot_init_seq(struct wl1251 *wl)
+{
+ u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
+
+ /*
+ * col #1: INTEGER_DIVIDER
+ * col #2: FRACTIONAL_DIVIDER
+ * col #3: ATTN_BB
+ * col #4: ALPHA_BB
+ * col #5: STOP_TIME_BB
+ * col #6: BB_PLL_LOOP_FILTER
+ */
+ static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
+
+ { 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/
+ { 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
+ { 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
+ { 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
+ { 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */
+ };
+
+ /* read NVS params */
+ scr_pad6 = wl1251_reg_read32(wl, SCR_PAD6);
+ wl1251_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+
+ /* read ELP_CMD */
+ elp_cmd = wl1251_reg_read32(wl, ELP_CMD);
+ wl1251_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+
+ /* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
+ ref_freq = scr_pad6 & 0x000000FF;
+ wl1251_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+
+ wl1251_reg_write32(wl, PLL_CAL_TIME, 0x9);
+
+ /*
+ * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
+ */
+ wl1251_reg_write32(wl, CLK_BUF_TIME, 0x6);
+
+ /*
+ * set the clock detect feature to work in the restart wu procedure
+ * (ELP_CFG_MODE[14]) and Select the clock source type
+ * (ELP_CFG_MODE[13:12])
+ */
+ tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
+ wl1251_reg_write32(wl, ELP_CFG_MODE, tmp);
+
+ /* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
+ elp_cmd |= 0x00000040;
+ wl1251_reg_write32(wl, ELP_CMD, elp_cmd);
+
+ /* PG 1.2: Set the BB PLL stable time to be 1000usec
+ * (PLL_STABLE_TIME) */
+ wl1251_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+
+ /* PG 1.2: read clock request time */
+ init_data = wl1251_reg_read32(wl, CLK_REQ_TIME);
+
+ /*
+ * PG 1.2: set the clock request time to be ref_clk_settling_time -
+ * 1ms = 4ms
+ */
+ if (init_data > 0x21)
+ tmp = init_data - 0x21;
+ else
+ tmp = 0;
+ wl1251_reg_write32(wl, CLK_REQ_TIME, tmp);
+
+ /* set BB PLL configurations in RF AFE */
+ wl1251_reg_write32(wl, 0x003058cc, 0x4B5);
+
+ /* set RF_AFE_REG_5 */
+ wl1251_reg_write32(wl, 0x003058d4, 0x50);
+
+ /* set RF_AFE_CTRL_REG_2 */
+ wl1251_reg_write32(wl, 0x00305948, 0x11c001);
+
+ /*
+ * change RF PLL and BB PLL divider for VCO clock and adjust VCO
+ * bais current(RF_AFE_REG_13)
+ */
+ wl1251_reg_write32(wl, 0x003058f4, 0x1e);
+
+ /* set BB PLL configurations */
+ tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
+ wl1251_reg_write32(wl, 0x00305840, tmp);
+
+ /* set fractional divider according to Appendix C-BB PLL
+ * Calculations
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
+ wl1251_reg_write32(wl, 0x00305844, tmp);
+
+ /* set the initial data for the sigma delta */
+ wl1251_reg_write32(wl, 0x00305848, 0x3039);
+
+ /*
+ * set the accumulator attenuation value, calibration loop1
+ * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
+ * the VCO gain
+ */
+ tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
+ (LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
+ wl1251_reg_write32(wl, 0x00305854, tmp);
+
+ /*
+ * set the calibration stop time after holdoff time expires and set
+ * settling time HOLD_OFF_TIME_BB
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
+ wl1251_reg_write32(wl, 0x00305858, tmp);
+
+ /*
+ * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
+ * constant leakage current to linearize PFD to 0uA -
+ * BB_ILOOPF[7:3]
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
+ wl1251_reg_write32(wl, 0x003058f8, tmp);
+
+ /*
+ * set regulator output voltage for n divider to
+ * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
+ * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
+ * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
+ */
+ wl1251_reg_write32(wl, 0x003058f0, 0x29);
+
+ /* enable restart wakeup sequence (ELP_CMD[0]) */
+ wl1251_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+
+ /* restart sequence completed */
+ udelay(2000);
+
+ return 0;
+}
+
+static void wl1251_boot_set_ecpu_ctrl(struct wl1251 *wl, u32 flag)
+{
+ u32 cpu_ctrl;
+
+ /* 10.5.0 run the firmware (I) */
+ cpu_ctrl = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ /* 10.5.1 run the firmware (II) */
+ cpu_ctrl &= ~flag;
+ wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+int wl1251_boot_run_firmware(struct wl1251 *wl)
+{
+ int loop, ret;
+ u32 chip_id, interrupt;
+
+ wl1251_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+ chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
+
+ wl1251_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+ if (chip_id != wl->chip_id) {
+ wl1251_error("chip id doesn't match after firmware boot");
+ return -EIO;
+ }
+
+ /* wait for init to complete */
+ loop = 0;
+ while (loop++ < INIT_LOOP) {
+ udelay(INIT_LOOP_DELAY);
+ interrupt = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+ if (interrupt == 0xffffffff) {
+ wl1251_error("error reading hardware complete "
+ "init indication");
+ return -EIO;
+ }
+ /* check that ACX_INTR_INIT_COMPLETE is enabled */
+ else if (interrupt & WL1251_ACX_INTR_INIT_COMPLETE) {
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ WL1251_ACX_INTR_INIT_COMPLETE);
+ break;
+ }
+ }
+
+ if (loop >= INIT_LOOP) {
+ wl1251_error("timeout waiting for the hardware to "
+ "complete initialization");
+ return -EIO;
+ }
+
+ /* get hardware config command mail box */
+ wl->cmd_box_addr = wl1251_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+ /* get hardware config event mail box */
+ wl->event_box_addr = wl1251_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+ /* set the working partition to its "running" mode offset */
+ wl1251_set_partition(wl, WL1251_PART_WORK_MEM_START,
+ WL1251_PART_WORK_MEM_SIZE,
+ WL1251_PART_WORK_REG_START,
+ WL1251_PART_WORK_REG_SIZE);
+
+ wl1251_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+ wl->cmd_box_addr, wl->event_box_addr);
+
+ wl1251_acx_fw_version(wl, wl->fw_ver, sizeof(wl->fw_ver));
+
+ /*
+ * in case of full asynchronous mode the firmware event must be
+ * ready to receive event from the command mailbox
+ */
+
+ /* enable gpio interrupts */
+ wl1251_enable_interrupts(wl);
+
+ /* Enable target's interrupts */
+ wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+ WL1251_ACX_INTR_RX1_DATA |
+ WL1251_ACX_INTR_TX_RESULT |
+ WL1251_ACX_INTR_EVENT_A |
+ WL1251_ACX_INTR_EVENT_B |
+ WL1251_ACX_INTR_INIT_COMPLETE;
+ wl1251_boot_target_enable_interrupts(wl);
+
+ /* unmask all mbox events */
+ wl->event_mask = 0xffffffff;
+
+ ret = wl1251_event_unmask(wl);
+ if (ret < 0) {
+ wl1251_error("EVENT mask setting failed");
+ return ret;
+ }
+
+ wl1251_event_mbox_config(wl);
+
+ /* firmware startup completed */
+ return 0;
+}
+
+static int wl1251_boot_upload_firmware(struct wl1251 *wl)
+{
+ int addr, chunk_num, partition_limit;
+ size_t fw_data_len;
+ u8 *p;
+
+ /* whal_FwCtrl_LoadFwImageSm() */
+
+ wl1251_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+ wl1251_reg_read32(wl, CHIP_ID_B));
+
+ /* 10.0 check firmware length and set partition */
+ fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+ (wl->fw[6] << 8) | (wl->fw[7]);
+
+ wl1251_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
+ CHUNK_SIZE);
+
+ if ((fw_data_len % 4) != 0) {
+ wl1251_error("firmware length not multiple of four");
+ return -EIO;
+ }
+
+ wl1251_set_partition(wl, WL1251_PART_DOWN_MEM_START,
+ WL1251_PART_DOWN_MEM_SIZE,
+ WL1251_PART_DOWN_REG_START,
+ WL1251_PART_DOWN_REG_SIZE);
+
+ /* 10.1 set partition limit and chunk num */
+ chunk_num = 0;
+ partition_limit = WL1251_PART_DOWN_MEM_SIZE;
+
+ while (chunk_num < fw_data_len / CHUNK_SIZE) {
+ /* 10.2 update partition, if needed */
+ addr = WL1251_PART_DOWN_MEM_START +
+ (chunk_num + 2) * CHUNK_SIZE;
+ if (addr > partition_limit) {
+ addr = WL1251_PART_DOWN_MEM_START +
+ chunk_num * CHUNK_SIZE;
+ partition_limit = chunk_num * CHUNK_SIZE +
+ WL1251_PART_DOWN_MEM_SIZE;
+ wl1251_set_partition(wl,
+ addr,
+ WL1251_PART_DOWN_MEM_SIZE,
+ WL1251_PART_DOWN_REG_START,
+ WL1251_PART_DOWN_REG_SIZE);
+ }
+
+ /* 10.3 upload the chunk */
+ addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
+ p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+ wl1251_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+ p, addr);
+ wl1251_mem_write(wl, addr, p, CHUNK_SIZE);
+
+ chunk_num++;
+ }
+
+ /* 10.4 upload the last chunk */
+ addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
+ p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+ wl1251_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
+ fw_data_len % CHUNK_SIZE, p, addr);
+ wl1251_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+ return 0;
+}
+
+static int wl1251_boot_upload_nvs(struct wl1251 *wl)
+{
+ size_t nvs_len, nvs_bytes_written, burst_len;
+ int nvs_start, i;
+ u32 dest_addr, val;
+ u8 *nvs_ptr, *nvs;
+
+ nvs = wl->nvs;
+ if (nvs == NULL)
+ return -ENODEV;
+
+ nvs_ptr = nvs;
+
+ nvs_len = wl->nvs_len;
+ nvs_start = wl->fw_len;
+
+ /*
+ * Layout before the actual NVS tables:
+ * 1 byte : burst length.
+ * 2 bytes: destination address.
+ * n bytes: data to burst copy.
+ *
+ * This is ended by a 0 length, then the NVS tables.
+ */
+
+ while (nvs_ptr[0]) {
+ burst_len = nvs_ptr[0];
+ dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+ /* We move our pointer to the data */
+ nvs_ptr += 3;
+
+ for (i = 0; i < burst_len; i++) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ wl1251_debug(DEBUG_BOOT,
+ "nvs burst write 0x%x: 0x%x",
+ dest_addr, val);
+ wl1251_mem_write32(wl, dest_addr, val);
+
+ nvs_ptr += 4;
+ dest_addr += 4;
+ }
+ }
+
+ /*
+ * We've reached the first zero length, the first NVS table
+ * is 7 bytes further.
+ */
+ nvs_ptr += 7;
+ nvs_len -= nvs_ptr - nvs;
+ nvs_len = ALIGN(nvs_len, 4);
+
+ /* Now we must set the partition correctly */
+ wl1251_set_partition(wl, nvs_start,
+ WL1251_PART_DOWN_MEM_SIZE,
+ WL1251_PART_DOWN_REG_START,
+ WL1251_PART_DOWN_REG_SIZE);
+
+ /* And finally we upload the NVS tables */
+ nvs_bytes_written = 0;
+ while (nvs_bytes_written < nvs_len) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ val = cpu_to_le32(val);
+
+ wl1251_debug(DEBUG_BOOT,
+ "nvs write table 0x%x: 0x%x",
+ nvs_start, val);
+ wl1251_mem_write32(wl, nvs_start, val);
+
+ nvs_ptr += 4;
+ nvs_bytes_written += 4;
+ nvs_start += 4;
+ }
+
+ return 0;
+}
+
+int wl1251_boot(struct wl1251 *wl)
+{
+ int ret = 0, minor_minor_e2_ver;
+ u32 tmp, boot_data;
+
+ /* halt embedded ARM CPU while loading firmware */
+ wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, ECPU_CONTROL_HALT);
+
+ ret = wl1251_boot_soft_reset(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 2. start processing NVS file */
+ ret = wl1251_boot_upload_nvs(wl);
+ if (ret < 0)
+ goto out;
+
+ /* write firmware's last address (ie. it's length) to
+ * ACX_EEPROMLESS_IND_REG */
+ wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+
+ /* 6. read the EEPROM parameters */
+ tmp = wl1251_reg_read32(wl, SCR_PAD2);
+
+ /* 7. read bootdata */
+ wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+ wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+ tmp = wl1251_reg_read32(wl, SCR_PAD3);
+
+ /* 8. check bootdata and call restart sequence */
+ wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+ minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+ wl1251_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+ "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+ wl->boot_attr.radio_type, wl->boot_attr.major,
+ wl->boot_attr.minor, minor_minor_e2_ver);
+
+ ret = wl1251_boot_init_seq(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 9. NVS processing done */
+ boot_data = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ wl1251_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+ /* 10. check that ECPU_CONTROL_HALT bits are set in
+ * pWhalBus->uBootData and start uploading firmware
+ */
+ if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+ wl1251_error("boot failed, ECPU_CONTROL_HALT not set");
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = wl1251_boot_upload_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 10.5 start firmware */
+ ret = wl1251_boot_run_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+out:
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.h b/drivers/net/wireless/wl12xx/wl1251_boot.h
new file mode 100644
index 0000000..9006369
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl1251.h"
+
+int wl1251_boot_soft_reset(struct wl1251 *wl);
+int wl1251_boot_init_seq(struct wl1251 *wl);
+int wl1251_boot_run_firmware(struct wl1251 *wl);
+void wl1251_boot_target_enable_interrupts(struct wl1251 *wl);
+int wl1251_boot(struct wl1251 *wl);
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.c b/drivers/net/wireless/wl12xx/wl1251_cmd.c
new file mode 100644
index 0000000..770f260
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.c
@@ -0,0 +1,412 @@
+#include "wl1251_cmd.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_io.h"
+#include "wl1251_ps.h"
+#include "wl1251_acx.h"
+
+/**
+ * send command to firmware
+ *
+ * @wl: wl struct
+ * @id: command id
+ * @buf: buffer containing the command, must work with dma
+ * @len: length of the buffer
+ */
+int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+ struct wl1251_cmd_header *cmd;
+ unsigned long timeout;
+ u32 intr;
+ int ret = 0;
+
+ cmd = buf;
+ cmd->id = id;
+ cmd->status = 0;
+
+ WARN_ON(len % 4 != 0);
+
+ wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
+
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+ timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
+
+ intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
+ if (time_after(jiffies, timeout)) {
+ wl1251_error("command complete timeout");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ msleep(1);
+
+ intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ }
+
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ WL1251_ACX_INTR_CMD_COMPLETE);
+
+out:
+ return ret;
+}
+
+/**
+ * send test command to firmware
+ *
+ * @wl: wl struct
+ * @buf: buffer containing the command, with all headers, must work with dma
+ * @len: length of the buffer
+ * @answer: is answer needed
+ */
+int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
+{
+ int ret;
+
+ wl1251_debug(DEBUG_CMD, "cmd test");
+
+ ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
+
+ if (ret < 0) {
+ wl1251_warning("TEST command failed");
+ return ret;
+ }
+
+ if (answer) {
+ struct wl1251_command *cmd_answer;
+
+ /*
+ * The test command got in, we can read the answer.
+ * The answer would be a wl1251_command, where the
+ * parameter array contains the actual answer.
+ */
+ wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+ cmd_answer = buf;
+
+ if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
+ wl1251_error("TEST command answer error: %d",
+ cmd_answer->header.status);
+ }
+
+ return 0;
+}
+
+/**
+ * read acx from firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer for the response, including all headers, must work with dma
+ * @len: lenght of buf
+ */
+int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+ struct acx_header *acx = buf;
+ int ret;
+
+ wl1251_debug(DEBUG_CMD, "cmd interrogate");
+
+ acx->id = id;
+
+ /* payload length, does not include any headers */
+ acx->len = len - sizeof(*acx);
+
+ ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1251_error("INTERROGATE command failed");
+ goto out;
+ }
+
+ /* the interrogate command got in, we can read the answer */
+ wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
+
+ acx = buf;
+ if (acx->cmd.status != CMD_STATUS_SUCCESS)
+ wl1251_error("INTERROGATE command error: %d",
+ acx->cmd.status);
+
+out:
+ return ret;
+}
+
+/**
+ * write acx value to firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer containing acx, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+ struct acx_header *acx = buf;
+ int ret;
+
+ wl1251_debug(DEBUG_CMD, "cmd configure");
+
+ acx->id = id;
+
+ /* payload length, does not include any headers */
+ acx->len = len - sizeof(*acx);
+
+ ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
+ if (ret < 0) {
+ wl1251_warning("CONFIGURE command NOK");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
+ void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+ struct wl1251_cmd_vbm_update *vbm;
+ int ret;
+
+ wl1251_debug(DEBUG_CMD, "cmd vbm");
+
+ vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
+ if (!vbm) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* Count and period will be filled by the target */
+ vbm->tim.bitmap_ctrl = bitmap_control;
+ if (bitmap_len > PARTIAL_VBM_MAX) {
+ wl1251_warning("cmd vbm len is %d B, truncating to %d",
+ bitmap_len, PARTIAL_VBM_MAX);
+ bitmap_len = PARTIAL_VBM_MAX;
+ }
+ memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
+ vbm->tim.identity = identity;
+ vbm->tim.length = bitmap_len + 3;
+
+ vbm->len = cpu_to_le16(bitmap_len + 5);
+
+ ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
+ if (ret < 0) {
+ wl1251_error("VBM command failed");
+ goto out;
+ }
+
+out:
+ kfree(vbm);
+ return 0;
+}
+
+int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
+{
+ struct cmd_enabledisable_path *cmd;
+ int ret;
+ u16 cmd_rx, cmd_tx;
+
+ wl1251_debug(DEBUG_CMD, "cmd data path");
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->channel = channel;
+
+ if (enable) {
+ cmd_rx = CMD_ENABLE_RX;
+ cmd_tx = CMD_ENABLE_TX;
+ } else {
+ cmd_rx = CMD_DISABLE_RX;
+ cmd_tx = CMD_DISABLE_TX;
+ }
+
+ ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1251_error("rx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ goto out;
+ }
+
+ wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+ ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1251_error("tx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ return ret;
+ }
+
+ wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+out:
+ kfree(cmd);
+ return ret;
+}
+
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+ u16 beacon_interval, u8 dtim_interval)
+{
+ struct cmd_join *join;
+ int ret, i;
+ u8 *bssid;
+
+ join = kzalloc(sizeof(*join), GFP_KERNEL);
+ if (!join) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
+ bss_type == BSS_TYPE_IBSS ? " ibss" : "",
+ channel, beacon_interval, dtim_interval);
+
+ /* Reverse order BSSID */
+ bssid = (u8 *) &join->bssid_lsb;
+ for (i = 0; i < ETH_ALEN; i++)
+ bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+ join->rx_config_options = wl->rx_config;
+ join->rx_filter_options = wl->rx_filter;
+
+ /*
+ * FIXME: disable temporarily all filters because after commit
+ * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
+ * association. The filter logic needs to be implemented properly
+ * and once that is done, this hack can be removed.
+ */
+ join->rx_config_options = 0;
+ join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
+
+ join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+ RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+ join->beacon_interval = beacon_interval;
+ join->dtim_interval = dtim_interval;
+ join->bss_type = bss_type;
+ join->channel = channel;
+ join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+ ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+ if (ret < 0) {
+ wl1251_error("failed to initiate cmd join");
+ goto out;
+ }
+
+out:
+ kfree(join);
+ return ret;
+}
+
+int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
+{
+ struct wl1251_cmd_ps_params *ps_params = NULL;
+ int ret = 0;
+
+ wl1251_debug(DEBUG_CMD, "cmd set ps mode");
+
+ ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
+ if (!ps_params) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ps_params->ps_mode = ps_mode;
+ ps_params->send_null_data = 1;
+ ps_params->retries = 5;
+ ps_params->hang_over_period = 128;
+ ps_params->null_data_rate = 1; /* 1 Mbps */
+
+ ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
+ sizeof(*ps_params));
+ if (ret < 0) {
+ wl1251_error("cmd set_ps_mode failed");
+ goto out;
+ }
+
+out:
+ kfree(ps_params);
+ return ret;
+}
+
+int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
+ size_t len)
+{
+ struct cmd_read_write_memory *cmd;
+ int ret = 0;
+
+ wl1251_debug(DEBUG_CMD, "cmd read memory");
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ WARN_ON(len > MAX_READ_SIZE);
+ len = min_t(size_t, len, MAX_READ_SIZE);
+
+ cmd->addr = addr;
+ cmd->size = len;
+
+ ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1251_error("read memory command failed: %d", ret);
+ goto out;
+ }
+
+ /* the read command got in, we can now read the answer */
+ wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+ if (cmd->header.status != CMD_STATUS_SUCCESS)
+ wl1251_error("error in read command result: %d",
+ cmd->header.status);
+
+ memcpy(answer, cmd->value, len);
+
+out:
+ kfree(cmd);
+ return ret;
+}
+
+int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
+ void *buf, size_t buf_len)
+{
+ struct wl1251_cmd_packet_template *cmd;
+ size_t cmd_len;
+ int ret = 0;
+
+ wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+ WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
+ buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
+ cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
+
+ cmd = kzalloc(cmd_len, GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->size = cpu_to_le16(buf_len);
+
+ if (buf)
+ memcpy(cmd->data, buf, buf_len);
+
+ ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
+ if (ret < 0) {
+ wl1251_warning("cmd set_template failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(cmd);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.h b/drivers/net/wireless/wl12xx/wl1251_cmd.h
new file mode 100644
index 0000000..dff798ad
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.h
@@ -0,0 +1,407 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_CMD_H__
+#define __WL1251_CMD_H__
+
+#include "wl1251.h"
+
+struct acx_header;
+
+int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len);
+int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer);
+int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len);
+int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len);
+int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
+ void *bitmap, u16 bitmap_len, u8 bitmap_control);
+int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable);
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+ u16 beacon_interval, u8 dtim_interval);
+int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode);
+int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
+ size_t len);
+int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
+ void *buf, size_t buf_len);
+
+/* unit ms */
+#define WL1251_COMMAND_TIMEOUT 2000
+
+enum wl1251_commands {
+ CMD_RESET = 0,
+ CMD_INTERROGATE = 1, /*use this to read information elements*/
+ CMD_CONFIGURE = 2, /*use this to write information elements*/
+ CMD_ENABLE_RX = 3,
+ CMD_ENABLE_TX = 4,
+ CMD_DISABLE_RX = 5,
+ CMD_DISABLE_TX = 6,
+ CMD_SCAN = 8,
+ CMD_STOP_SCAN = 9,
+ CMD_VBM = 10,
+ CMD_START_JOIN = 11,
+ CMD_SET_KEYS = 12,
+ CMD_READ_MEMORY = 13,
+ CMD_WRITE_MEMORY = 14,
+ CMD_BEACON = 19,
+ CMD_PROBE_RESP = 20,
+ CMD_NULL_DATA = 21,
+ CMD_PROBE_REQ = 22,
+ CMD_TEST = 23,
+ CMD_RADIO_CALIBRATE = 25, /* OBSOLETE */
+ CMD_ENABLE_RX_PATH = 27, /* OBSOLETE */
+ CMD_NOISE_HIST = 28,
+ CMD_RX_RESET = 29,
+ CMD_PS_POLL = 30,
+ CMD_QOS_NULL_DATA = 31,
+ CMD_LNA_CONTROL = 32,
+ CMD_SET_BCN_MODE = 33,
+ CMD_MEASUREMENT = 34,
+ CMD_STOP_MEASUREMENT = 35,
+ CMD_DISCONNECT = 36,
+ CMD_SET_PS_MODE = 37,
+ CMD_CHANNEL_SWITCH = 38,
+ CMD_STOP_CHANNEL_SWICTH = 39,
+ CMD_AP_DISCOVERY = 40,
+ CMD_STOP_AP_DISCOVERY = 41,
+ CMD_SPS_SCAN = 42,
+ CMD_STOP_SPS_SCAN = 43,
+ CMD_HEALTH_CHECK = 45,
+ CMD_DEBUG = 46,
+ CMD_TRIGGER_SCAN_TO = 47,
+
+ NUM_COMMANDS,
+ MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+struct wl1251_cmd_header {
+ u16 id;
+ u16 status;
+ /* payload */
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct wl1251_command {
+ struct wl1251_cmd_header header;
+ u8 parameters[MAX_CMD_PARAMS];
+};
+
+enum {
+ CMD_MAILBOX_IDLE = 0,
+ CMD_STATUS_SUCCESS = 1,
+ CMD_STATUS_UNKNOWN_CMD = 2,
+ CMD_STATUS_UNKNOWN_IE = 3,
+ CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11,
+ CMD_STATUS_RX_BUSY = 13,
+ CMD_STATUS_INVALID_PARAM = 14,
+ CMD_STATUS_TEMPLATE_TOO_LARGE = 15,
+ CMD_STATUS_OUT_OF_MEMORY = 16,
+ CMD_STATUS_STA_TABLE_FULL = 17,
+ CMD_STATUS_RADIO_ERROR = 18,
+ CMD_STATUS_WRONG_NESTING = 19,
+ CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/
+ CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/
+ MAX_COMMAND_STATUS = 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+ struct wl1251_cmd_header header;
+
+ /* The address of the memory to read from or write to.*/
+ u32 addr;
+
+ /* The amount of data in bytes to read from or write to the WiLink
+ * device.*/
+ u32 size;
+
+ /* The actual value read from or written to the Wilink. The source
+ of this field is the Host in WRITE command or the Wilink in READ
+ command. */
+ u8 value[MAX_READ_SIZE];
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+
+struct basic_scan_parameters {
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * Scan options:
+ * bit 0: When this bit is set, passive scan.
+ * bit 1: Band, when this bit is set we scan
+ * in the 5Ghz band.
+ * bit 2: voice mode, 0 for normal scan.
+ * bit 3: scan priority, 1 for high priority.
+ */
+ u16 scan_options;
+
+ /* Number of channels to scan */
+ u8 num_channels;
+
+ /* Number opf probe requests to send, per channel */
+ u8 num_probe_requests;
+
+ /* Rate and modulation for probe requests */
+ u16 tx_rate;
+
+ u8 tid_trigger;
+ u8 ssid_len;
+ u32 ssid[8];
+
+} __attribute__ ((packed));
+
+struct basic_scan_channel_parameters {
+ u32 min_duration; /* in TU */
+ u32 max_duration; /* in TU */
+ u32 bssid_lsb;
+ u16 bssid_msb;
+
+ /*
+ * bits 0-3: Early termination count.
+ * bits 4-5: Early termination condition.
+ */
+ u8 early_termination;
+
+ u8 tx_power_att;
+ u8 channel;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+/* SCAN parameters */
+#define SCAN_MAX_NUM_OF_CHANNELS 16
+
+struct cmd_scan {
+ struct wl1251_cmd_header header;
+
+ struct basic_scan_parameters params;
+ struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+} __attribute__ ((packed));
+
+enum {
+ BSS_TYPE_IBSS = 0,
+ BSS_TYPE_STA_BSS = 2,
+ BSS_TYPE_AP_BSS = 3,
+ MAX_BSS_TYPE = 0xFF
+};
+
+#define JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */
+#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE 0x01 /* Early wakeup time */
+
+
+struct cmd_join {
+ struct wl1251_cmd_header header;
+
+ u32 bssid_lsb;
+ u16 bssid_msb;
+ u16 beacon_interval; /* in TBTTs */
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * The target uses this field to determine the rate at
+ * which to transmit control frame responses (such as
+ * ACK or CTS frames).
+ */
+ u16 basic_rate_set;
+ u8 dtim_interval;
+ u8 tx_ctrl_frame_rate; /* OBSOLETE */
+ u8 tx_ctrl_frame_mod; /* OBSOLETE */
+ /*
+ * bits 0-2: This bitwise field specifies the type
+ * of BSS to start or join (BSS_TYPE_*).
+ * bit 4: Band - The radio band in which to join
+ * or start.
+ * 0 - 2.4GHz band
+ * 1 - 5GHz band
+ * bits 3, 5-7: Reserved
+ */
+ u8 bss_type;
+ u8 channel;
+ u8 ssid_len;
+ u8 ssid[IW_ESSID_MAX_SIZE];
+ u8 ctrl; /* JOIN_CMD_CTRL_* */
+ u8 tx_mgt_frame_rate; /* OBSOLETE */
+ u8 tx_mgt_frame_mod; /* OBSOLETE */
+ u8 reserved;
+} __attribute__ ((packed));
+
+struct cmd_enabledisable_path {
+ struct wl1251_cmd_header header;
+
+ u8 channel;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+#define WL1251_MAX_TEMPLATE_SIZE 300
+
+struct wl1251_cmd_packet_template {
+ struct wl1251_cmd_header header;
+
+ __le16 size;
+ u8 data[0];
+} __attribute__ ((packed));
+
+#define TIM_ELE_ID 5
+#define PARTIAL_VBM_MAX 251
+
+struct wl1251_tim {
+ u8 identity;
+ u8 length;
+ u8 dtim_count;
+ u8 dtim_period;
+ u8 bitmap_ctrl;
+ u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __attribute__ ((packed));
+
+/* Virtual Bit Map update */
+struct wl1251_cmd_vbm_update {
+ struct wl1251_cmd_header header;
+ __le16 len;
+ u8 padding[2];
+ struct wl1251_tim tim;
+} __attribute__ ((packed));
+
+enum wl1251_cmd_ps_mode {
+ STATION_ACTIVE_MODE,
+ STATION_POWER_SAVE_MODE
+};
+
+struct wl1251_cmd_ps_params {
+ struct wl1251_cmd_header header;
+
+ u8 ps_mode; /* STATION_* */
+ u8 send_null_data; /* Do we have to send NULL data packet ? */
+ u8 retries; /* Number of retires for the initial NULL data packet */
+
+ /*
+ * TUs during which the target stays awake after switching
+ * to power save mode.
+ */
+ u8 hang_over_period;
+ u16 null_data_rate;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct wl1251_cmd_trigger_scan_to {
+ struct wl1251_cmd_header header;
+
+ u32 timeout;
+};
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE 0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE 0x80
+
+enum wl1251_cmd_key_action {
+ KEY_ADD_OR_REPLACE = 1,
+ KEY_REMOVE = 2,
+ KEY_SET_ID = 3,
+ MAX_KEY_ACTION = 0xffff,
+};
+
+enum wl1251_cmd_key_type {
+ KEY_WEP_DEFAULT = 0,
+ KEY_WEP_ADDR = 1,
+ KEY_AES_GROUP = 4,
+ KEY_AES_PAIRWISE = 5,
+ KEY_WEP_GROUP = 6,
+ KEY_TKIP_MIC_GROUP = 10,
+ KEY_TKIP_MIC_PAIRWISE = 11,
+};
+
+/*
+ *
+ * key_type_e key size key format
+ * ---------- --------- ----------
+ * 0x00 5, 13, 29 Key data
+ * 0x01 5, 13, 29 Key data
+ * 0x04 16 16 bytes of key data
+ * 0x05 16 16 bytes of key data
+ * 0x0a 32 16 bytes of TKIP key data
+ * 8 bytes of RX MIC key data
+ * 8 bytes of TX MIC key data
+ * 0x0b 32 16 bytes of TKIP key data
+ * 8 bytes of RX MIC key data
+ * 8 bytes of TX MIC key data
+ *
+ */
+
+struct wl1251_cmd_set_keys {
+ struct wl1251_cmd_header header;
+
+ /* Ignored for default WEP key */
+ u8 addr[ETH_ALEN];
+
+ /* key_action_e */
+ u16 key_action;
+
+ u16 reserved_1;
+
+ /* key size in bytes */
+ u8 key_size;
+
+ /* key_type_e */
+ u8 key_type;
+ u8 ssid_profile;
+
+ /*
+ * TKIP, AES: frame's key id field.
+ * For WEP default key: key id;
+ */
+ u8 id;
+ u8 reserved_2[6];
+ u8 key[MAX_KEY_SIZE];
+ u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+ u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __attribute__ ((packed));
+
+
+#endif /* __WL1251_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_debugfs.c b/drivers/net/wireless/wl12xx/wl1251_debugfs.c
new file mode 100644
index 0000000..a007230
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_debugfs.c
@@ -0,0 +1,518 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251_debugfs.h"
+
+#include <linux/skbuff.h>
+
+#include "wl1251.h"
+#include "wl1251_acx.h"
+#include "wl1251_ps.h"
+
+/* ms */
+#define WL1251_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \
+static ssize_t name## _read(struct file *file, char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl1251 *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", ##value); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations name## _ops = { \
+ .read = name## _read, \
+ .open = wl1251_open_file_generic, \
+};
+
+#define DEBUGFS_ADD(name, parent) \
+ wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \
+ wl, &name## _ops); \
+ if (IS_ERR(wl->debugfs.name)) { \
+ ret = PTR_ERR(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ goto out; \
+ }
+
+#define DEBUGFS_DEL(name) \
+ do { \
+ debugfs_remove(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ } while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt) \
+static ssize_t sub## _ ##name## _read(struct file *file, \
+ char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl1251 *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ wl1251_debugfs_update_stats(wl); \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", \
+ wl->stats.fw_stats->sub.name); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations sub## _ ##name## _ops = { \
+ .read = sub## _ ##name## _read, \
+ .open = wl1251_open_file_generic, \
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name) \
+ DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name) \
+ DEBUGFS_DEL(sub## _ ##name)
+
+static void wl1251_debugfs_update_stats(struct wl1251 *wl)
+{
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ if (wl->state == WL1251_STATE_ON &&
+ time_after(jiffies, wl->stats.fw_stats_update +
+ msecs_to_jiffies(WL1251_DEBUGFS_STATS_LIFETIME))) {
+ wl1251_acx_statistics(wl, wl->stats.fw_stats);
+ wl->stats.fw_stats_update = jiffies;
+ }
+
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+ 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+ wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1251 *wl = file->private_data;
+ u32 queue_len;
+ char buf[20];
+ int res;
+
+ queue_len = skb_queue_len(&wl->tx_queue);
+
+ res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+ .read = tx_queue_len_read,
+ .open = wl1251_open_file_generic,
+};
+
+static void wl1251_debugfs_delete_files(struct wl1251 *wl)
+{
+ DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+ DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+ DEBUGFS_FWSTATS_DEL(rx, dropped);
+ DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+ DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_DEL(rx, path_reset);
+ DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+ DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_DEL(isr, fiqs);
+ DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+ DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+ DEBUGFS_FWSTATS_DEL(isr, irqs);
+ DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+ DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_DEL(isr, commands);
+ DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+ DEBUGFS_FWSTATS_DEL(isr, wakeups);
+ DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+ DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+ DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(wep, packets);
+ DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+ DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+ DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+ DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_DEL(event, heart_beat);
+ DEBUGFS_FWSTATS_DEL(event, calibration);
+ DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+ DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_DEL(event, rx_pool);
+ DEBUGFS_FWSTATS_DEL(event, oom_late);
+ DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_DEL(tx_queue_len);
+ DEBUGFS_DEL(retry_count);
+ DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl1251_debugfs_add_files(struct wl1251 *wl)
+{
+ int ret = 0;
+
+ DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+ DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+ DEBUGFS_FWSTATS_ADD(rx, dropped);
+ DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+ DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_ADD(rx, path_reset);
+ DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+ DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_ADD(isr, fiqs);
+ DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+ DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+ DEBUGFS_FWSTATS_ADD(isr, irqs);
+ DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+ DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_ADD(isr, commands);
+ DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+ DEBUGFS_FWSTATS_ADD(isr, wakeups);
+ DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+ DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+ DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(wep, packets);
+ DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+ DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+ DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+ DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_ADD(event, heart_beat);
+ DEBUGFS_FWSTATS_ADD(event, calibration);
+ DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+ DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_ADD(event, rx_pool);
+ DEBUGFS_FWSTATS_ADD(event, oom_late);
+ DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+ DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+ DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+ if (ret < 0)
+ wl1251_debugfs_delete_files(wl);
+
+ return ret;
+}
+
+void wl1251_debugfs_reset(struct wl1251 *wl)
+{
+ memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+ wl->stats.retry_count = 0;
+ wl->stats.excessive_retries = 0;
+}
+
+int wl1251_debugfs_init(struct wl1251 *wl)
+{
+ int ret;
+
+ wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ if (IS_ERR(wl->debugfs.rootdir)) {
+ ret = PTR_ERR(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+ goto err;
+ }
+
+ wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+ wl->debugfs.rootdir);
+
+ if (IS_ERR(wl->debugfs.fw_statistics)) {
+ ret = PTR_ERR(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+ goto err_root;
+ }
+
+ wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+ GFP_KERNEL);
+
+ if (!wl->stats.fw_stats) {
+ ret = -ENOMEM;
+ goto err_fw;
+ }
+
+ wl->stats.fw_stats_update = jiffies;
+
+ ret = wl1251_debugfs_add_files(wl);
+
+ if (ret < 0)
+ goto err_file;
+
+ return 0;
+
+err_file:
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+err_fw:
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+err_root:
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+err:
+ return ret;
+}
+
+void wl1251_debugfs_exit(struct wl1251 *wl)
+{
+ wl1251_debugfs_delete_files(wl);
+
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_debugfs.h b/drivers/net/wireless/wl12xx/wl1251_debugfs.h
new file mode 100644
index 0000000..6dc3d08
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL1251_DEBUGFS_H
+#define WL1251_DEBUGFS_H
+
+#include "wl1251.h"
+
+int wl1251_debugfs_init(struct wl1251 *wl);
+void wl1251_debugfs_exit(struct wl1251 *wl);
+void wl1251_debugfs_reset(struct wl1251 *wl);
+
+#endif /* WL1251_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/wl1251_event.c b/drivers/net/wireless/wl12xx/wl1251_event.c
new file mode 100644
index 0000000..00076c4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_event.c
@@ -0,0 +1,128 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_io.h"
+#include "wl1251_event.h"
+#include "wl1251_ps.h"
+
+static int wl1251_event_scan_complete(struct wl1251 *wl,
+ struct event_mailbox *mbox)
+{
+ wl1251_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
+ mbox->scheduled_scan_status,
+ mbox->scheduled_scan_channels);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, false);
+ mutex_lock(&wl->mutex);
+ wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed");
+ wl->scanning = false;
+ }
+
+ return 0;
+}
+
+static void wl1251_event_mbox_dump(struct event_mailbox *mbox)
+{
+ wl1251_debug(DEBUG_EVENT, "MBOX DUMP:");
+ wl1251_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+ wl1251_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl1251_event_process(struct wl1251 *wl, struct event_mailbox *mbox)
+{
+ int ret;
+ u32 vector;
+
+ wl1251_event_mbox_dump(mbox);
+
+ vector = mbox->events_vector & ~(mbox->events_mask);
+ wl1251_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+ if (vector & SCAN_COMPLETE_EVENT_ID) {
+ ret = wl1251_event_scan_complete(wl, mbox);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vector & BSS_LOSE_EVENT_ID) {
+ wl1251_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+ if (wl->psm_requested && wl->psm) {
+ ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+int wl1251_event_unmask(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_event_mbox_mask(wl, ~(wl->event_mask));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void wl1251_event_mbox_config(struct wl1251 *wl)
+{
+ wl->mbox_ptr[0] = wl1251_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+ wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+ wl1251_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+ wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl1251_event_handle(struct wl1251 *wl, u8 mbox_num)
+{
+ struct event_mailbox mbox;
+ int ret;
+
+ wl1251_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+ if (mbox_num > 1)
+ return -EINVAL;
+
+ /* first we read the mbox descriptor */
+ wl1251_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+ sizeof(struct event_mailbox));
+
+ /* process the descriptor */
+ ret = wl1251_event_process(wl, &mbox);
+ if (ret < 0)
+ return ret;
+
+ /* then we let the firmware know it can go on...*/
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_event.h b/drivers/net/wireless/wl12xx/wl1251_event.h
new file mode 100644
index 0000000..be0ac54
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_event.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_EVENT_H__
+#define __WL1251_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+ RESERVED1_EVENT_ID = BIT(0),
+ RESERVED2_EVENT_ID = BIT(1),
+ MEASUREMENT_START_EVENT_ID = BIT(2),
+ SCAN_COMPLETE_EVENT_ID = BIT(3),
+ CALIBRATION_COMPLETE_EVENT_ID = BIT(4),
+ ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5),
+ PS_REPORT_EVENT_ID = BIT(6),
+ SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7),
+ HEALTH_REPORT_EVENT_ID = BIT(8),
+ ACI_DETECTION_EVENT_ID = BIT(9),
+ DEBUG_REPORT_EVENT_ID = BIT(10),
+ MAC_STATUS_EVENT_ID = BIT(11),
+ DISCONNECT_EVENT_COMPLETE_ID = BIT(12),
+ JOIN_EVENT_COMPLETE_ID = BIT(13),
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14),
+ BSS_LOSE_EVENT_ID = BIT(15),
+ ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16),
+ MEASUREMENT_COMPLETE_EVENT_ID = BIT(17),
+ AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18),
+ SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19),
+ PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20),
+ RESET_BSS_EVENT_ID = BIT(21),
+ REGAINED_BSS_EVENT_ID = BIT(22),
+ ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23),
+ ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24),
+ ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25),
+
+ DBG_EVENT_ID = BIT(26),
+ BT_PTA_SENSE_EVENT_ID = BIT(27),
+ BT_PTA_PREDICTION_EVENT_ID = BIT(28),
+ BT_PTA_AVALANCHE_EVENT_ID = BIT(29),
+
+ PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30),
+
+ EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
+};
+
+struct event_debug_report {
+ u8 debug_event_id;
+ u8 num_params;
+ u16 pad;
+ u32 report_1;
+ u32 report_2;
+ u32 report_3;
+} __attribute__ ((packed));
+
+struct event_mailbox {
+ u32 events_vector;
+ u32 events_mask;
+ u32 reserved_1;
+ u32 reserved_2;
+
+ char average_rssi_level;
+ u8 ps_status;
+ u8 channel_switch_status;
+ u8 scheduled_scan_status;
+
+ /* Channels scanned by the scheduled scan */
+ u16 scheduled_scan_channels;
+
+ /* If bit 0 is set -> target's fatal error */
+ u16 health_report;
+ u16 bad_fft_counter;
+ u8 bt_pta_sense_info;
+ u8 bt_pta_protective_info;
+ u32 reserved;
+ u32 debug_report[2];
+
+ /* Number of FCS errors since last event */
+ u32 fcs_err_counter;
+
+ struct event_debug_report report;
+ u8 average_snr_level;
+ u8 padding[19];
+} __attribute__ ((packed));
+
+int wl1251_event_unmask(struct wl1251 *wl);
+void wl1251_event_mbox_config(struct wl1251 *wl);
+int wl1251_event_handle(struct wl1251 *wl, u8 mbox);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_init.c b/drivers/net/wireless/wl12xx/wl1251_init.c
new file mode 100644
index 0000000..b2ee4f4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_init.c
@@ -0,0 +1,413 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251_init.h"
+#include "wl12xx_80211.h"
+#include "wl1251_acx.h"
+#include "wl1251_cmd.h"
+#include "wl1251_reg.h"
+
+int wl1251_hw_init_hwenc_config(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_feature_cfg(wl);
+ if (ret < 0) {
+ wl1251_warning("couldn't set feature config");
+ return ret;
+ }
+
+ ret = wl1251_acx_default_key(wl, wl->default_key);
+ if (ret < 0) {
+ wl1251_warning("couldn't set default key");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl1251_hw_init_templates_config(struct wl1251 *wl)
+{
+ int ret;
+ u8 partial_vbm[PARTIAL_VBM_MAX];
+
+ /* send empty templates for fw memory reservation */
+ ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
+ sizeof(struct wl12xx_probe_req_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, NULL,
+ sizeof(struct wl12xx_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_template_set(wl, CMD_PS_POLL, NULL,
+ sizeof(struct wl12xx_ps_poll_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
+ sizeof
+ (struct wl12xx_qos_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
+ sizeof
+ (struct wl12xx_probe_resp_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_template_set(wl, CMD_BEACON, NULL,
+ sizeof
+ (struct wl12xx_beacon_template));
+ if (ret < 0)
+ return ret;
+
+ /* tim templates, first reserve space then allocate an empty one */
+ memset(partial_vbm, 0, PARTIAL_VBM_MAX);
+ ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter)
+{
+ int ret;
+
+ ret = wl1251_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_rx_config(wl, config, filter);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_phy_config(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_pd_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_slot(wl, DEFAULT_SLOT_TIME);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_group_address_tbl(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_service_period_timeout(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_beacon_filter(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_beacon_filter_opt(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_beacon_filter_table(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_pta(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_sg_enable(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_sg_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_energy_detection(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_cca_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_bcn_dtim_options(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1251_hw_init_power_auth(struct wl1251 *wl)
+{
+ return wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM);
+}
+
+int wl1251_hw_init_mem_config(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_acx_mem_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+ GFP_KERNEL);
+ if (!wl->target_mem_map) {
+ wl1251_error("couldn't allocate target memory map");
+ return -ENOMEM;
+ }
+
+ /* we now ask for the firmware built memory map */
+ ret = wl1251_acx_mem_map(wl, wl->target_mem_map,
+ sizeof(struct wl1251_acx_mem_map));
+ if (ret < 0) {
+ wl1251_error("couldn't retrieve firmware memory map");
+ kfree(wl->target_mem_map);
+ wl->target_mem_map = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+ struct acx_tx_queue_qos_config *config,
+ u32 num_blocks)
+{
+ config->qid = qid;
+
+ switch (qid) {
+ case QOS_AC_BE:
+ config->high_threshold =
+ (QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_BK:
+ config->high_threshold =
+ (QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_VI:
+ config->high_threshold =
+ (QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_VO:
+ config->high_threshold =
+ (QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+ break;
+ default:
+ wl1251_error("Invalid TX queue id: %d", qid);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl)
+{
+ struct acx_tx_queue_qos_config *config;
+ struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+ int ret, i;
+
+ wl1251_debug(DEBUG_ACX, "acx tx queue config");
+
+ config = kzalloc(sizeof(*config), GFP_KERNEL);
+ if (!config) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 0; i < MAX_NUM_OF_AC; i++) {
+ ret = wl1251_hw_init_txq_fill(i, config,
+ wl_mem_map->num_tx_mem_blocks);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG,
+ config, sizeof(*config));
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ kfree(config);
+ return ret;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl1251 *wl)
+{
+ int ret;
+
+ /* asking for the data path parameters */
+ wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+ GFP_KERNEL);
+ if (!wl->data_path) {
+ wl1251_error("Couldnt allocate data path parameters");
+ return -ENOMEM;
+ }
+
+ ret = wl1251_acx_data_path_params(wl, wl->data_path);
+ if (ret < 0) {
+ kfree(wl->data_path);
+ wl->data_path = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+
+int wl1251_hw_init(struct wl1251 *wl)
+{
+ struct wl1251_acx_mem_map *wl_mem_map;
+ int ret;
+
+ ret = wl1251_hw_init_hwenc_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Template settings */
+ ret = wl1251_hw_init_templates_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default memory configuration */
+ ret = wl1251_hw_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default data path configuration */
+ ret = wl1251_hw_init_data_path_config(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* RX config */
+ ret = wl1251_hw_init_rx_config(wl,
+ RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+ RX_FILTER_OPTION_DEF);
+ /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+ RX_FILTER_OPTION_FILTER_ALL); */
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* TX queues config */
+ ret = wl1251_hw_init_tx_queue_config(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* PHY layer config */
+ ret = wl1251_hw_init_phy_config(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Beacon filtering */
+ ret = wl1251_hw_init_beacon_filter(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Bluetooth WLAN coexistence */
+ ret = wl1251_hw_init_pta(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Energy detection */
+ ret = wl1251_hw_init_energy_detection(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Beacons and boradcast settings */
+ ret = wl1251_hw_init_beacon_broadcast(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Enable data path */
+ ret = wl1251_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Default power state */
+ ret = wl1251_hw_init_power_auth(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ wl_mem_map = wl->target_mem_map;
+ wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+ wl_mem_map->num_tx_mem_blocks,
+ wl->data_path->tx_control_addr,
+ wl_mem_map->num_rx_mem_blocks,
+ wl->data_path->rx_control_addr);
+
+ return 0;
+
+ out_free_data_path:
+ kfree(wl->data_path);
+
+ out_free_memmap:
+ kfree(wl->target_mem_map);
+
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_init.h b/drivers/net/wireless/wl12xx/wl1251_init.h
new file mode 100644
index 0000000..b3b25ec
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_init.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_INIT_H__
+#define __WL1251_INIT_H__
+
+#include "wl1251.h"
+
+int wl1251_hw_init_hwenc_config(struct wl1251 *wl);
+int wl1251_hw_init_templates_config(struct wl1251 *wl);
+int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter);
+int wl1251_hw_init_phy_config(struct wl1251 *wl);
+int wl1251_hw_init_beacon_filter(struct wl1251 *wl);
+int wl1251_hw_init_pta(struct wl1251 *wl);
+int wl1251_hw_init_energy_detection(struct wl1251 *wl);
+int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl);
+int wl1251_hw_init_power_auth(struct wl1251 *wl);
+int wl1251_hw_init_mem_config(struct wl1251 *wl);
+int wl1251_hw_init(struct wl1251 *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_io.c b/drivers/net/wireless/wl12xx/wl1251_io.c
new file mode 100644
index 0000000..f1c232e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_io.c
@@ -0,0 +1,196 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_io.h"
+
+/* FIXME: this is static data nowadays and the table can be removed */
+static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = {
+ [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474),
+ [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478),
+ [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494),
+ [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498),
+ [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C),
+ [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+ [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4),
+ [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8),
+ [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000),
+ [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C),
+ [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804)
+};
+
+static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr)
+{
+ /* If the address is lower than REGISTERS_BASE, it means that this is
+ * a chip-specific register address, so look it up in the registers
+ * table */
+ if (addr < REGISTERS_BASE) {
+ /* Make sure we don't go over the table */
+ if (addr >= ACX_REG_TABLE_LEN) {
+ wl1251_error("address out of range (%d)", addr);
+ return -EINVAL;
+ }
+ addr = wl1251_io_reg_table[addr];
+ }
+
+ return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl1251_translate_mem_addr(struct wl1251 *wl, int addr)
+{
+ return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len)
+{
+ int physical;
+
+ physical = wl1251_translate_mem_addr(wl, addr);
+
+ wl->if_ops->read(wl, physical, buf, len);
+}
+
+void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len)
+{
+ int physical;
+
+ physical = wl1251_translate_mem_addr(wl, addr);
+
+ wl->if_ops->write(wl, physical, buf, len);
+}
+
+u32 wl1251_mem_read32(struct wl1251 *wl, int addr)
+{
+ return wl1251_read32(wl, wl1251_translate_mem_addr(wl, addr));
+}
+
+void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val)
+{
+ wl1251_write32(wl, wl1251_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl1251_reg_read32(struct wl1251 *wl, int addr)
+{
+ return wl1251_read32(wl, wl1251_translate_reg_addr(wl, addr));
+}
+
+void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val)
+{
+ wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val);
+}
+
+/* Set the partitions to access the chip addresses.
+ *
+ * There are two VIRTUAL partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory. This function also makes other checks to
+ * ensure that the partitions are not overlapping. In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ * PHYSICAL address
+ * space
+ *
+ * | |
+ * ...+----+--> mem_start
+ * VIRTUAL address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * part_size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * part_size | | ... | |
+ * + <--+----+... ...+----+--> reg_start
+ * reg_size ... | |
+ * ... | | [PART_1]
+ * ... | |
+ * ...+----+--> reg_start + reg_size
+ * | |
+ *
+ */
+void wl1251_set_partition(struct wl1251 *wl,
+ u32 mem_start, u32 mem_size,
+ u32 reg_start, u32 reg_size)
+{
+ struct wl1251_partition partition[2];
+
+ wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+
+ /* Make sure that the two partitions together don't exceed the
+ * address range */
+ if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+ wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+ " address range. Truncating partition[0].");
+ mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+ wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ if ((mem_start < reg_start) &&
+ ((mem_start + mem_size) > reg_start)) {
+ /* Guarantee that the memory partition doesn't overlap the
+ * registers partition */
+ wl1251_debug(DEBUG_SPI, "End of partition[0] is "
+ "overlapping partition[1]. Adjusted.");
+ mem_size = reg_start - mem_start;
+ wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ } else if ((reg_start < mem_start) &&
+ ((reg_start + reg_size) > mem_start)) {
+ /* Guarantee that the register partition doesn't overlap the
+ * memory partition */
+ wl1251_debug(DEBUG_SPI, "End of partition[1] is"
+ " overlapping partition[0]. Adjusted.");
+ reg_size = mem_start - reg_start;
+ wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ partition[0].start = mem_start;
+ partition[0].size = mem_size;
+ partition[1].start = reg_start;
+ partition[1].size = reg_size;
+
+ wl->physical_mem_addr = mem_start;
+ wl->physical_reg_addr = reg_start;
+
+ wl->virtual_mem_addr = 0;
+ wl->virtual_reg_addr = mem_size;
+
+ wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition,
+ sizeof(partition));
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_io.h b/drivers/net/wireless/wl12xx/wl1251_io.h
new file mode 100644
index 0000000..b89d2ac
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_io.h
@@ -0,0 +1,64 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#ifndef __WL1251_IO_H__
+#define __WL1251_IO_H__
+
+#include "wl1251.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR 0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR 0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE 4
+
+#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
+
+static inline u32 wl1251_read32(struct wl1251 *wl, int addr)
+{
+ u32 response;
+
+ wl->if_ops->read(wl, addr, &response, sizeof(u32));
+
+ return response;
+}
+
+static inline void wl1251_write32(struct wl1251 *wl, int addr, u32 val)
+{
+ wl->if_ops->write(wl, addr, &val, sizeof(u32));
+}
+
+/* Memory target IO, address is translated to partition 0 */
+void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len);
+void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len);
+u32 wl1251_mem_read32(struct wl1251 *wl, int addr);
+void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val);
+/* Registers IO */
+u32 wl1251_reg_read32(struct wl1251 *wl, int addr);
+void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val);
+
+void wl1251_set_partition(struct wl1251 *wl,
+ u32 part_start, u32 part_size,
+ u32 reg_start, u32 reg_size);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
new file mode 100644
index 0000000..5809ef5
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -0,0 +1,1428 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+
+#include "wl1251.h"
+#include "wl12xx_80211.h"
+#include "wl1251_reg.h"
+#include "wl1251_io.h"
+#include "wl1251_cmd.h"
+#include "wl1251_event.h"
+#include "wl1251_tx.h"
+#include "wl1251_rx.h"
+#include "wl1251_ps.h"
+#include "wl1251_init.h"
+#include "wl1251_debugfs.h"
+#include "wl1251_boot.h"
+
+void wl1251_enable_interrupts(struct wl1251 *wl)
+{
+ wl->if_ops->enable_irq(wl);
+}
+
+void wl1251_disable_interrupts(struct wl1251 *wl)
+{
+ wl->if_ops->disable_irq(wl);
+}
+
+static void wl1251_power_off(struct wl1251 *wl)
+{
+ wl->set_power(false);
+}
+
+static void wl1251_power_on(struct wl1251 *wl)
+{
+ wl->set_power(true);
+}
+
+static int wl1251_fetch_firmware(struct wl1251 *wl)
+{
+ const struct firmware *fw;
+ struct device *dev = wiphy_dev(wl->hw->wiphy);
+ int ret;
+
+ ret = request_firmware(&fw, WL1251_FW_NAME, dev);
+
+ if (ret < 0) {
+ wl1251_error("could not get firmware: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl1251_error("firmware size is not multiple of 32 bits: %zu",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->fw_len = fw->size;
+ wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+
+ if (!wl->fw) {
+ wl1251_error("could not allocate memory for the firmware");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->fw, fw->data, wl->fw_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static int wl1251_fetch_nvs(struct wl1251 *wl)
+{
+ const struct firmware *fw;
+ struct device *dev = wiphy_dev(wl->hw->wiphy);
+ int ret;
+
+ ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
+
+ if (ret < 0) {
+ wl1251_error("could not get nvs file: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl1251_error("nvs size is not multiple of 32 bits: %zu",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->nvs_len = fw->size;
+ wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+
+ if (!wl->nvs) {
+ wl1251_error("could not allocate memory for the nvs file");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->nvs, fw->data, wl->nvs_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static void wl1251_fw_wakeup(struct wl1251 *wl)
+{
+ u32 elp_reg;
+
+ elp_reg = ELPCTRL_WAKE_UP;
+ wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+ elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+ if (!(elp_reg & ELPCTRL_WLAN_READY))
+ wl1251_warning("WLAN not ready");
+}
+
+static int wl1251_chip_wakeup(struct wl1251 *wl)
+{
+ int ret = 0;
+
+ wl1251_power_on(wl);
+ msleep(WL1251_POWER_ON_SLEEP);
+ wl->if_ops->reset(wl);
+
+ /* We don't need a real memory partition here, because we only want
+ * to use the registers at this point. */
+ wl1251_set_partition(wl,
+ 0x00000000,
+ 0x00000000,
+ REGISTERS_BASE,
+ REGISTERS_DOWN_SIZE);
+
+ /* ELP module wake up */
+ wl1251_fw_wakeup(wl);
+
+ /* whal_FwCtrl_BootSm() */
+
+ /* 0. read chip id from CHIP_ID */
+ wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
+
+ /* 1. check if chip id is valid */
+
+ switch (wl->chip_id) {
+ case CHIP_ID_1251_PG12:
+ wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
+ wl->chip_id);
+ break;
+ case CHIP_ID_1251_PG10:
+ case CHIP_ID_1251_PG11:
+ default:
+ wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (wl->fw == NULL) {
+ ret = wl1251_fetch_firmware(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* No NVS from netlink, try to get it from the filesystem */
+ if (wl->nvs == NULL) {
+ ret = wl1251_fetch_nvs(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void wl1251_irq_work(struct work_struct *work)
+{
+ u32 intr;
+ struct wl1251 *wl =
+ container_of(work, struct wl1251, irq_work);
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ wl1251_debug(DEBUG_IRQ, "IRQ work");
+
+ if (wl->state == WL1251_STATE_OFF)
+ goto out;
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+ intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+ wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+ if (wl->data_path) {
+ wl->rx_counter =
+ wl1251_mem_read32(wl, wl->data_path->rx_control_addr);
+
+ /* We handle a frmware bug here */
+ switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+ case 0:
+ wl1251_debug(DEBUG_IRQ, "RX: FW and host in sync");
+ intr &= ~WL1251_ACX_INTR_RX0_DATA;
+ intr &= ~WL1251_ACX_INTR_RX1_DATA;
+ break;
+ case 1:
+ wl1251_debug(DEBUG_IRQ, "RX: FW +1");
+ intr |= WL1251_ACX_INTR_RX0_DATA;
+ intr &= ~WL1251_ACX_INTR_RX1_DATA;
+ break;
+ case 2:
+ wl1251_debug(DEBUG_IRQ, "RX: FW +2");
+ intr |= WL1251_ACX_INTR_RX0_DATA;
+ intr |= WL1251_ACX_INTR_RX1_DATA;
+ break;
+ default:
+ wl1251_warning("RX: FW and host out of sync: %d",
+ wl->rx_counter - wl->rx_handled);
+ break;
+ }
+
+ wl->rx_handled = wl->rx_counter;
+
+
+ wl1251_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
+ }
+
+ intr &= wl->intr_mask;
+
+ if (intr == 0) {
+ wl1251_debug(DEBUG_IRQ, "INTR is 0");
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+ ~(wl->intr_mask));
+
+ goto out_sleep;
+ }
+
+ if (intr & WL1251_ACX_INTR_RX0_DATA) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+ wl1251_rx(wl);
+ }
+
+ if (intr & WL1251_ACX_INTR_RX1_DATA) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+ wl1251_rx(wl);
+ }
+
+ if (intr & WL1251_ACX_INTR_TX_RESULT) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+ wl1251_tx_complete(wl);
+ }
+
+ if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
+ if (intr & WL1251_ACX_INTR_EVENT_A)
+ wl1251_event_handle(wl, 0);
+ else
+ wl1251_event_handle(wl, 1);
+ }
+
+ if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
+
+ wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+ u16 beacon_interval, u8 dtim_period)
+{
+ int ret;
+
+ ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+ DEFAULT_HW_GEN_MODULATION_TYPE,
+ wl->tx_mgmt_frm_rate,
+ wl->tx_mgmt_frm_mod);
+ if (ret < 0)
+ goto out;
+
+
+ ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
+ dtim_period);
+ if (ret < 0)
+ goto out;
+
+ /*
+ * FIXME: we should wait for JOIN_EVENT_COMPLETE_ID but to simplify
+ * locking we just sleep instead, for now
+ */
+ msleep(10);
+
+out:
+ return ret;
+}
+
+static void wl1251_filter_work(struct work_struct *work)
+{
+ struct wl1251 *wl =
+ container_of(work, struct wl1251, filter_work);
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL1251_STATE_OFF)
+ goto out;
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
+ wl->dtim_period);
+ if (ret < 0)
+ goto out_sleep;
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct wl1251 *wl = hw->priv;
+
+ skb_queue_tail(&wl->tx_queue, skb);
+
+ /*
+ * The chip specific setup must run before the first TX packet -
+ * before that, the tx_work will not be initialized!
+ */
+
+ ieee80211_queue_work(wl->hw, &wl->tx_work);
+
+ /*
+ * The workqueue is slow to process the tx_queue and we need stop
+ * the queue here, otherwise the queue will get too long.
+ */
+ if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_MAX_LENGTH) {
+ ieee80211_stop_queues(wl->hw);
+
+ /*
+ * FIXME: this is racy, the variable is not properly
+ * protected. Maybe fix this by removing the stupid
+ * variable altogether and checking the real queue state?
+ */
+ wl->tx_queue_stopped = true;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int wl1251_op_start(struct ieee80211_hw *hw)
+{
+ struct wl1251 *wl = hw->priv;
+ int ret = 0;
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 start");
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state != WL1251_STATE_OFF) {
+ wl1251_error("cannot start because not in off state: %d",
+ wl->state);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ret = wl1251_chip_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_hw_init(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_acx_station_id(wl);
+ if (ret < 0)
+ goto out;
+
+ wl->state = WL1251_STATE_ON;
+
+ wl1251_info("firmware booted (%s)", wl->fw_ver);
+
+out:
+ if (ret < 0)
+ wl1251_power_off(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static void wl1251_op_stop(struct ieee80211_hw *hw)
+{
+ struct wl1251 *wl = hw->priv;
+
+ wl1251_info("down");
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
+
+ mutex_lock(&wl->mutex);
+
+ WARN_ON(wl->state != WL1251_STATE_ON);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, true);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ wl->state = WL1251_STATE_OFF;
+
+ wl1251_disable_interrupts(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ cancel_work_sync(&wl->irq_work);
+ cancel_work_sync(&wl->tx_work);
+ cancel_work_sync(&wl->filter_work);
+
+ mutex_lock(&wl->mutex);
+
+ /* let's notify MAC80211 about the remaining pending TX frames */
+ wl1251_tx_flush(wl);
+ wl1251_power_off(wl);
+
+ memset(wl->bssid, 0, ETH_ALEN);
+ wl->listen_int = 1;
+ wl->bss_type = MAX_BSS_TYPE;
+
+ wl->data_in_count = 0;
+ wl->rx_counter = 0;
+ wl->rx_handled = 0;
+ wl->rx_current_buffer = 0;
+ wl->rx_last_id = 0;
+ wl->next_tx_complete = 0;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
+ wl->channel = WL1251_DEFAULT_CHANNEL;
+
+ wl1251_debugfs_reset(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_op_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct wl1251 *wl = hw->priv;
+ int ret = 0;
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
+ conf->type, conf->mac_addr);
+
+ mutex_lock(&wl->mutex);
+
+ switch (conf->type) {
+ case NL80211_IFTYPE_STATION:
+ wl->bss_type = BSS_TYPE_STA_BSS;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ wl->bss_type = BSS_TYPE_IBSS;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
+ memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+ ret = wl1251_acx_station_id(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
+}
+
+static int wl1251_build_null_data(struct wl1251 *wl)
+{
+ struct wl12xx_null_data_template template;
+
+ if (!is_zero_ether_addr(wl->bssid)) {
+ memcpy(template.header.da, wl->bssid, ETH_ALEN);
+ memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+ } else {
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ }
+
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_NULLFUNC);
+
+ return wl1251_cmd_template_set(wl, CMD_NULL_DATA, &template,
+ sizeof(template));
+
+}
+
+static int wl1251_build_ps_poll(struct wl1251 *wl, u16 aid)
+{
+ struct wl12xx_ps_poll_template template;
+
+ memcpy(template.bssid, wl->bssid, ETH_ALEN);
+ memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+ template.aid = aid;
+ template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+ return wl1251_cmd_template_set(wl, CMD_PS_POLL, &template,
+ sizeof(template));
+
+}
+
+static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct wl1251 *wl = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int channel, ret = 0;
+
+ channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+ channel,
+ conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+ conf->power_level);
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ if (channel != wl->channel) {
+ wl->channel = channel;
+
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ if (ret < 0)
+ goto out_sleep;
+ }
+
+ ret = wl1251_build_null_data(wl);
+ if (ret < 0)
+ goto out_sleep;
+
+ if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+ wl1251_debug(DEBUG_PSM, "psm enabled");
+
+ wl->psm_requested = true;
+
+ /*
+ * We enter PSM only if we're already associated.
+ * If we're not, we'll enter it when joining an SSID,
+ * through the bss_info_changed() hook.
+ */
+ ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ } else if (!(conf->flags & IEEE80211_CONF_PS) &&
+ wl->psm_requested) {
+ wl1251_debug(DEBUG_PSM, "psm disabled");
+
+ wl->psm_requested = false;
+
+ if (wl->psm)
+ ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ }
+
+ if (conf->power_level != wl->power_level) {
+ ret = wl1251_acx_tx_power(wl, conf->power_level);
+ if (ret < 0)
+ goto out;
+
+ wl->power_level = conf->power_level;
+ }
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+#define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_FCSFAIL | \
+ FIF_BCN_PRBRESP_PROMISC | \
+ FIF_CONTROL | \
+ FIF_OTHER_BSS)
+
+static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed,
+ unsigned int *total,u64 multicast)
+{
+ struct wl1251 *wl = hw->priv;
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+ *total &= WL1251_SUPPORTED_FILTERS;
+ changed &= WL1251_SUPPORTED_FILTERS;
+
+ if (changed == 0)
+ /* no filters which we support changed */
+ return;
+
+ /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+
+ wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
+
+ if (*total & FIF_PROMISC_IN_BSS) {
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+ wl->rx_config |= CFG_RX_ALL_GOOD;
+ }
+ if (*total & FIF_ALLMULTI)
+ /*
+ * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+ * all multicast frames
+ */
+ wl->rx_config &= ~CFG_MC_FILTER_EN;
+ if (*total & FIF_FCSFAIL)
+ wl->rx_filter |= CFG_RX_FCS_ERROR;
+ if (*total & FIF_BCN_PRBRESP_PROMISC) {
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_SSID_FILTER_EN;
+ }
+ if (*total & FIF_CONTROL)
+ wl->rx_filter |= CFG_RX_CTL_EN;
+ if (*total & FIF_OTHER_BSS)
+ wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+
+ /*
+ * FIXME: workqueues need to be properly cancelled on stop(), for
+ * now let's just disable changing the filter settings. They will
+ * be updated any on config().
+ */
+ /* schedule_work(&wl->filter_work); */
+}
+
+/* HW encryption */
+static int wl1251_set_key_type(struct wl1251 *wl,
+ struct wl1251_cmd_set_keys *key,
+ enum set_key_cmd cmd,
+ struct ieee80211_key_conf *mac80211_key,
+ const u8 *addr)
+{
+ switch (mac80211_key->alg) {
+ case ALG_WEP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_WEP_DEFAULT;
+ else
+ key->key_type = KEY_WEP_ADDR;
+
+ mac80211_key->hw_key_idx = mac80211_key->keyidx;
+ break;
+ case ALG_TKIP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_TKIP_MIC_GROUP;
+ else
+ key->key_type = KEY_TKIP_MIC_PAIRWISE;
+
+ mac80211_key->hw_key_idx = mac80211_key->keyidx;
+ break;
+ case ALG_CCMP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_AES_GROUP;
+ else
+ key->key_type = KEY_AES_PAIRWISE;
+ mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ break;
+ default:
+ wl1251_error("Unknown key algo 0x%x", mac80211_key->alg);
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct wl1251 *wl = hw->priv;
+ struct wl1251_cmd_set_keys *wl_cmd;
+ const u8 *addr;
+ int ret;
+
+ static const u8 bcast_addr[ETH_ALEN] =
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
+
+ wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
+ if (!wl_cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ addr = sta ? sta->addr : bcast_addr;
+
+ wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+ wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+ wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+ key->alg, key->keyidx, key->keylen, key->flags);
+ wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
+
+ if (is_zero_ether_addr(addr)) {
+ /* We dont support TX only encryption */
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out_unlock;
+
+ switch (cmd) {
+ case SET_KEY:
+ wl_cmd->key_action = KEY_ADD_OR_REPLACE;
+ break;
+ case DISABLE_KEY:
+ wl_cmd->key_action = KEY_REMOVE;
+ break;
+ default:
+ wl1251_error("Unsupported key cmd 0x%x", cmd);
+ break;
+ }
+
+ ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
+ if (ret < 0) {
+ wl1251_error("Set KEY type failed");
+ goto out_sleep;
+ }
+
+ if (wl_cmd->key_type != KEY_WEP_DEFAULT)
+ memcpy(wl_cmd->addr, addr, ETH_ALEN);
+
+ if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
+ (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
+ /*
+ * We get the key in the following form:
+ * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+ * but the target is expecting:
+ * TKIP - RX MIC - TX MIC
+ */
+ memcpy(wl_cmd->key, key->key, 16);
+ memcpy(wl_cmd->key + 16, key->key + 24, 8);
+ memcpy(wl_cmd->key + 24, key->key + 16, 8);
+
+ } else {
+ memcpy(wl_cmd->key, key->key, key->keylen);
+ }
+ wl_cmd->key_size = key->keylen;
+
+ wl_cmd->id = key->keyidx;
+ wl_cmd->ssid_profile = 0;
+
+ wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
+
+ ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
+ if (ret < 0) {
+ wl1251_warning("could not set keys");
+ goto out_sleep;
+ }
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
+
+out:
+ kfree(wl_cmd);
+
+ return ret;
+}
+
+static int wl1251_build_basic_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+ return index;
+}
+
+static int wl1251_build_extended_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_OFDM_RATE_6MB;
+ rates[index++] = IEEE80211_OFDM_RATE_9MB;
+ rates[index++] = IEEE80211_OFDM_RATE_12MB;
+ rates[index++] = IEEE80211_OFDM_RATE_18MB;
+ rates[index++] = IEEE80211_OFDM_RATE_24MB;
+ rates[index++] = IEEE80211_OFDM_RATE_36MB;
+ rates[index++] = IEEE80211_OFDM_RATE_48MB;
+ rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+ return index;
+}
+
+
+static int wl1251_build_probe_req(struct wl1251 *wl, u8 *ssid, size_t ssid_len)
+{
+ struct wl12xx_probe_req_template template;
+ struct wl12xx_ie_rates *rates;
+ char *ptr;
+ u16 size;
+
+ ptr = (char *)&template;
+ size = sizeof(struct ieee80211_header);
+
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+ /* IEs */
+ /* SSID */
+ template.ssid.header.id = WLAN_EID_SSID;
+ template.ssid.header.len = ssid_len;
+ if (ssid_len && ssid)
+ memcpy(template.ssid.ssid, ssid, ssid_len);
+ size += sizeof(struct wl12xx_ie_header) + ssid_len;
+ ptr += size;
+
+ /* Basic Rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_SUPP_RATES;
+ rates->header.len = wl1251_build_basic_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+ ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ /* Extended rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+ rates->header.len = wl1251_build_extended_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ wl1251_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+ return wl1251_cmd_template_set(wl, CMD_PROBE_REQ, &template,
+ size);
+}
+
+static int wl1251_hw_scan(struct wl1251 *wl, u8 *ssid, size_t len,
+ u8 active_scan, u8 high_prio, u8 num_channels,
+ u8 probe_requests)
+{
+ struct wl1251_cmd_trigger_scan_to *trigger = NULL;
+ struct cmd_scan *params = NULL;
+ int i, ret;
+ u16 scan_options = 0;
+
+ if (wl->scanning)
+ return -EINVAL;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+ params->params.rx_filter_options =
+ cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+ /* High priority scan */
+ if (!active_scan)
+ scan_options |= SCAN_PASSIVE;
+ if (high_prio)
+ scan_options |= SCAN_PRIORITY_HIGH;
+ params->params.scan_options = scan_options;
+
+ params->params.num_channels = num_channels;
+ params->params.num_probe_requests = probe_requests;
+ params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+ params->params.tid_trigger = 0;
+
+ for (i = 0; i < num_channels; i++) {
+ params->channels[i].min_duration = cpu_to_le32(30000);
+ params->channels[i].max_duration = cpu_to_le32(60000);
+ memset(¶ms->channels[i].bssid_lsb, 0xff, 4);
+ memset(¶ms->channels[i].bssid_msb, 0xff, 2);
+ params->channels[i].early_termination = 0;
+ params->channels[i].tx_power_att = 0;
+ params->channels[i].channel = i + 1;
+ memset(params->channels[i].pad, 0, 3);
+ }
+
+ for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
+ memset(¶ms->channels[i], 0,
+ sizeof(struct basic_scan_channel_parameters));
+
+ if (len && ssid) {
+ params->params.ssid_len = len;
+ memcpy(params->params.ssid, ssid, len);
+ } else {
+ params->params.ssid_len = 0;
+ memset(params->params.ssid, 0, 32);
+ }
+
+ ret = wl1251_build_probe_req(wl, ssid, len);
+ if (ret < 0) {
+ wl1251_error("PROBE request template failed");
+ goto out;
+ }
+
+ trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
+ if (!trigger)
+ goto out;
+
+ trigger->timeout = 0;
+
+ ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
+ sizeof(*trigger));
+ if (ret < 0) {
+ wl1251_error("trigger scan to failed for hw scan");
+ goto out;
+ }
+
+ wl1251_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+ wl->scanning = true;
+
+ ret = wl1251_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+ if (ret < 0)
+ wl1251_error("SCAN failed");
+
+ wl1251_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+ if (params->header.status != CMD_STATUS_SUCCESS) {
+ wl1251_error("TEST command answer error: %d",
+ params->header.status);
+ wl->scanning = false;
+ ret = -EIO;
+ goto out;
+ }
+
+out:
+ kfree(params);
+ return ret;
+
+}
+
+static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req)
+{
+ struct wl1251 *wl = hw->priv;
+ int ret;
+ u8 *ssid = NULL;
+ size_t ssid_len = 0;
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+ if (req->n_ssids) {
+ ssid = req->ssids[0].ssid;
+ ssid_len = req->ssids[0].ssid_len;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct wl1251 *wl = hw->priv;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_acx_rts_threshold(wl, (u16) value);
+ if (ret < 0)
+ wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
+
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changed)
+{
+ enum wl1251_cmd_ps_mode mode;
+ struct wl1251 *wl = hw->priv;
+ struct sk_buff *beacon;
+ int ret;
+
+ wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (bss_conf->assoc) {
+ wl->beacon_int = bss_conf->beacon_int;
+ wl->dtim_period = bss_conf->dtim_period;
+
+ /* FIXME: call join */
+
+ wl->aid = bss_conf->aid;
+
+ ret = wl1251_build_ps_poll(wl, wl->aid);
+ if (ret < 0)
+ goto out_sleep;
+
+ ret = wl1251_acx_aid(wl, wl->aid);
+ if (ret < 0)
+ goto out_sleep;
+
+ /* If we want to go in PSM but we're not there yet */
+ if (wl->psm_requested && !wl->psm) {
+ mode = STATION_POWER_SAVE_MODE;
+ ret = wl1251_ps_set_mode(wl, mode);
+ if (ret < 0)
+ goto out_sleep;
+ }
+ } else {
+ /* use defaults when not associated */
+ wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
+ wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
+ }
+ }
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (bss_conf->use_short_slot)
+ ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
+ else
+ ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
+ if (ret < 0) {
+ wl1251_warning("Set slot time failed %d", ret);
+ goto out_sleep;
+ }
+ }
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ if (bss_conf->use_short_preamble)
+ wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+ else
+ wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+ }
+
+ if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+ if (bss_conf->use_cts_prot)
+ ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+ else
+ ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+ if (ret < 0) {
+ wl1251_warning("Set ctsprotect failed %d", ret);
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_BSSID) {
+ memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+ ret = wl1251_build_null_data(wl);
+ if (ret < 0)
+ goto out;
+
+ if (wl->bss_type != BSS_TYPE_IBSS) {
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ if (ret < 0)
+ goto out_sleep;
+ wl1251_warning("Set ctsprotect failed %d", ret);
+ goto out_sleep;
+ }
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ beacon = ieee80211_beacon_get(hw, vif);
+ ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
+ beacon->len);
+
+ if (ret < 0) {
+ dev_kfree_skb(beacon);
+ goto out;
+ }
+
+ ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
+ beacon->len);
+
+ dev_kfree_skb(beacon);
+
+ if (ret < 0)
+ goto out;
+
+ ret = wl1251_join(wl, wl->bss_type, wl->beacon_int,
+ wl->channel, wl->dtim_period);
+
+ if (ret < 0)
+ goto out;
+ }
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl1251_rates[] = {
+ { .bitrate = 10,
+ .hw_value = 0x1,
+ .hw_value_short = 0x1, },
+ { .bitrate = 20,
+ .hw_value = 0x2,
+ .hw_value_short = 0x2,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = 0x4,
+ .hw_value_short = 0x4,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = 0x20,
+ .hw_value_short = 0x20,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = 0x8,
+ .hw_value_short = 0x8, },
+ { .bitrate = 90,
+ .hw_value = 0x10,
+ .hw_value_short = 0x10, },
+ { .bitrate = 120,
+ .hw_value = 0x40,
+ .hw_value_short = 0x40, },
+ { .bitrate = 180,
+ .hw_value = 0x80,
+ .hw_value_short = 0x80, },
+ { .bitrate = 240,
+ .hw_value = 0x200,
+ .hw_value_short = 0x200, },
+ { .bitrate = 360,
+ .hw_value = 0x400,
+ .hw_value_short = 0x400, },
+ { .bitrate = 480,
+ .hw_value = 0x800,
+ .hw_value_short = 0x800, },
+ { .bitrate = 540,
+ .hw_value = 0x1000,
+ .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl1251_channels[] = {
+ { .hw_value = 1, .center_freq = 2412},
+ { .hw_value = 2, .center_freq = 2417},
+ { .hw_value = 3, .center_freq = 2422},
+ { .hw_value = 4, .center_freq = 2427},
+ { .hw_value = 5, .center_freq = 2432},
+ { .hw_value = 6, .center_freq = 2437},
+ { .hw_value = 7, .center_freq = 2442},
+ { .hw_value = 8, .center_freq = 2447},
+ { .hw_value = 9, .center_freq = 2452},
+ { .hw_value = 10, .center_freq = 2457},
+ { .hw_value = 11, .center_freq = 2462},
+ { .hw_value = 12, .center_freq = 2467},
+ { .hw_value = 13, .center_freq = 2472},
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl1251_band_2ghz = {
+ .channels = wl1251_channels,
+ .n_channels = ARRAY_SIZE(wl1251_channels),
+ .bitrates = wl1251_rates,
+ .n_bitrates = ARRAY_SIZE(wl1251_rates),
+};
+
+static const struct ieee80211_ops wl1251_ops = {
+ .start = wl1251_op_start,
+ .stop = wl1251_op_stop,
+ .add_interface = wl1251_op_add_interface,
+ .remove_interface = wl1251_op_remove_interface,
+ .config = wl1251_op_config,
+ .configure_filter = wl1251_op_configure_filter,
+ .tx = wl1251_op_tx,
+ .set_key = wl1251_op_set_key,
+ .hw_scan = wl1251_op_hw_scan,
+ .bss_info_changed = wl1251_op_bss_info_changed,
+ .set_rts_threshold = wl1251_op_set_rts_threshold,
+};
+
+static int wl1251_register_hw(struct wl1251 *wl)
+{
+ int ret;
+
+ if (wl->mac80211_registered)
+ return 0;
+
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+ ret = ieee80211_register_hw(wl->hw);
+ if (ret < 0) {
+ wl1251_error("unable to register mac80211 hw: %d", ret);
+ return ret;
+ }
+
+ wl->mac80211_registered = true;
+
+ wl1251_notice("loaded");
+
+ return 0;
+}
+
+int wl1251_init_ieee80211(struct wl1251 *wl)
+{
+ int ret;
+
+ /* The tx descriptor buffer and the TKIP space */
+ wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+ + WL1251_TKIP_IV_SPACE;
+
+ /* unit us */
+ /* FIXME: find a proper value */
+ wl->hw->channel_change_time = 10000;
+
+ wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->max_scan_ssids = 1;
+ wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
+
+ ret = wl1251_register_hw(wl);
+ if (ret)
+ goto out;
+
+ wl1251_debugfs_init(wl);
+ wl1251_notice("initialized");
+
+ ret = 0;
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
+
+struct ieee80211_hw *wl1251_alloc_hw(void)
+{
+ struct ieee80211_hw *hw;
+ struct wl1251 *wl;
+ int i;
+ static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+ hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
+ if (!hw) {
+ wl1251_error("could not alloc ieee80211_hw");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ wl = hw->priv;
+ memset(wl, 0, sizeof(*wl));
+
+ wl->hw = hw;
+
+ wl->data_in_count = 0;
+
+ skb_queue_head_init(&wl->tx_queue);
+
+ INIT_WORK(&wl->filter_work, wl1251_filter_work);
+ wl->channel = WL1251_DEFAULT_CHANNEL;
+ wl->scanning = false;
+ wl->default_key = 0;
+ wl->listen_int = 1;
+ wl->rx_counter = 0;
+ wl->rx_handled = 0;
+ wl->rx_current_buffer = 0;
+ wl->rx_last_id = 0;
+ wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->psm_requested = false;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
+ wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
+ wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ wl->tx_frames[i] = NULL;
+
+ wl->next_tx_complete = 0;
+
+ INIT_WORK(&wl->irq_work, wl1251_irq_work);
+ INIT_WORK(&wl->tx_work, wl1251_tx_work);
+
+ /*
+ * In case our MAC address is not correctly set,
+ * we use a random but Nokia MAC.
+ */
+ memcpy(wl->mac_addr, nokia_oui, 3);
+ get_random_bytes(wl->mac_addr + 3, 3);
+
+ wl->state = WL1251_STATE_OFF;
+ mutex_init(&wl->mutex);
+
+ wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
+ wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
+
+ wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
+ if (!wl->rx_descriptor) {
+ wl1251_error("could not allocate memory for rx descriptor");
+ ieee80211_free_hw(hw);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ return hw;
+}
+EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
+
+int wl1251_free_hw(struct wl1251 *wl)
+{
+ ieee80211_unregister_hw(wl->hw);
+
+ wl1251_debugfs_exit(wl);
+
+ kfree(wl->target_mem_map);
+ kfree(wl->data_path);
+ kfree(wl->fw);
+ wl->fw = NULL;
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+
+ kfree(wl->rx_descriptor);
+ wl->rx_descriptor = NULL;
+
+ ieee80211_free_hw(wl->hw);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wl1251_free_hw);
+
+MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1251_netlink.h b/drivers/net/wireless/wl12xx/wl1251_netlink.h
new file mode 100644
index 0000000..ee36695
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_netlink.h
@@ -0,0 +1,30 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_NETLINK_H__
+#define __WL1251_NETLINK_H__
+
+int wl1251_nl_register(void);
+void wl1251_nl_unregister(void);
+
+#endif /* __WL1251_NETLINK_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.c b/drivers/net/wireless/wl12xx/wl1251_ps.c
new file mode 100644
index 0000000..c53e287
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.c
@@ -0,0 +1,161 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251_reg.h"
+#include "wl1251_ps.h"
+#include "wl1251_cmd.h"
+#include "wl1251_io.h"
+
+#define WL1251_WAKEUP_TIMEOUT 2000
+
+/* Routines to toggle sleep mode while in ELP */
+void wl1251_ps_elp_sleep(struct wl1251 *wl)
+{
+ if (wl->elp || !wl->psm)
+ return;
+
+ wl1251_debug(DEBUG_PSM, "chip to elp");
+
+ wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+
+ wl->elp = true;
+}
+
+int wl1251_ps_elp_wakeup(struct wl1251 *wl)
+{
+ unsigned long timeout;
+ u32 elp_reg;
+
+ if (!wl->elp)
+ return 0;
+
+ wl1251_debug(DEBUG_PSM, "waking up chip from elp");
+
+ timeout = jiffies + msecs_to_jiffies(WL1251_WAKEUP_TIMEOUT);
+
+ wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+ elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+ /*
+ * FIXME: we should wait for irq from chip but, as a temporary
+ * solution to simplify locking, let's poll instead
+ */
+ while (!(elp_reg & ELPCTRL_WLAN_READY)) {
+ if (time_after(jiffies, timeout)) {
+ wl1251_error("elp wakeup timeout");
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+ }
+
+ wl1251_debug(DEBUG_PSM, "wakeup time: %u ms",
+ jiffies_to_msecs(jiffies) -
+ (jiffies_to_msecs(timeout) - WL1251_WAKEUP_TIMEOUT));
+
+ wl->elp = false;
+
+ return 0;
+}
+
+static int wl1251_ps_set_elp(struct wl1251 *wl, bool enable)
+{
+ int ret;
+
+ if (enable) {
+ wl1251_debug(DEBUG_PSM, "sleep auth psm/elp");
+
+ ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_ELP);
+ if (ret < 0)
+ return ret;
+
+ wl1251_ps_elp_sleep(wl);
+ } else {
+ wl1251_debug(DEBUG_PSM, "sleep auth cam");
+
+ /*
+ * When the target is in ELP, we can only
+ * access the ELP control register. Thus,
+ * we have to wake the target up before
+ * changing the power authorization.
+ */
+
+ wl1251_ps_elp_wakeup(wl);
+
+ ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode)
+{
+ int ret;
+
+ switch (mode) {
+ case STATION_POWER_SAVE_MODE:
+ wl1251_debug(DEBUG_PSM, "entering psm");
+
+ ret = wl1251_acx_wake_up_conditions(wl,
+ WAKE_UP_EVENT_DTIM_BITMAP,
+ wl->listen_int);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_ps_set_elp(wl, true);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 1;
+ break;
+ case STATION_ACTIVE_MODE:
+ default:
+ wl1251_debug(DEBUG_PSM, "leaving psm");
+ ret = wl1251_ps_set_elp(wl, false);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_acx_wake_up_conditions(wl,
+ WAKE_UP_EVENT_DTIM_BITMAP,
+ wl->listen_int);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 0;
+ break;
+ }
+
+ return ret;
+}
+
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.h b/drivers/net/wireless/wl12xx/wl1251_ps.h
new file mode 100644
index 0000000..db036fe
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.h
@@ -0,0 +1,36 @@
+#ifndef __WL1251_PS_H__
+#define __WL1251_PS_H__
+
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251.h"
+#include "wl1251_acx.h"
+
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode);
+void wl1251_ps_elp_sleep(struct wl1251 *wl);
+int wl1251_ps_elp_wakeup(struct wl1251 *wl);
+
+
+#endif /* __WL1251_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_reg.h b/drivers/net/wireless/wl12xx/wl1251_reg.h
new file mode 100644
index 0000000..06e1bd9
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_reg.h
@@ -0,0 +1,644 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE 0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP 0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
+#define ELPCTRL_SLEEP 0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY 0x2
+
+/* Device Configuration registers*/
+#define SOR_CFG (REGISTERS_BASE + 0x0800)
+#define ECPU_CTRL (REGISTERS_BASE + 0x0804)
+#define HI_CFG (REGISTERS_BASE + 0x0808)
+#define EE_START (REGISTERS_BASE + 0x080C)
+
+#define CHIP_ID_B (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1251_PG10 (0x7010101)
+#define CHIP_ID_1251_PG11 (0x7020101)
+#define CHIP_ID_1251_PG12 (0x7030101)
+
+#define ENABLE (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
+#define ELP_CMD (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0 (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1 (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2 (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3 (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4 (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5 (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6 (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7 (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8 (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9 (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1 (REGISTERS_BASE + 0x0994)
+#define SPARE_A2 (REGISTERS_BASE + 0x0998)
+#define SPARE_A3 (REGISTERS_BASE + 0x099C)
+#define SPARE_A4 (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5 (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6 (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7 (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8 (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1 (REGISTERS_BASE + 0x5420)
+#define SPARE_B2 (REGISTERS_BASE + 0x5424)
+#define SPARE_B3 (REGISTERS_BASE + 0x5428)
+#define SPARE_B4 (REGISTERS_BASE + 0x542C)
+#define SPARE_B5 (REGISTERS_BASE + 0x5430)
+#define SPARE_B6 (REGISTERS_BASE + 0x5434)
+#define SPARE_B7 (REGISTERS_BASE + 0x5438)
+#define SPARE_B8 (REGISTERS_BASE + 0x543C)
+
+enum wl12xx_acx_int_reg {
+ ACX_REG_INTERRUPT_TRIG,
+ ACX_REG_INTERRUPT_TRIG_H,
+
+/*=============================================
+ Host Interrupt Mask Register - 32bit (RW)
+ ------------------------------------------
+ Setting a bit in this register masks the
+ corresponding interrupt to the host.
+ 0 - RX0 - Rx first dubble buffer Data Interrupt
+ 1 - TXD - Tx Data Interrupt
+ 2 - TXXFR - Tx Transfer Interrupt
+ 3 - RX1 - Rx second dubble buffer Data Interrupt
+ 4 - RXXFR - Rx Transfer Interrupt
+ 5 - EVENT_A - Event Mailbox interrupt
+ 6 - EVENT_B - Event Mailbox interrupt
+ 7 - WNONHST - Wake On Host Interrupt
+ 8 - TRACE_A - Debug Trace interrupt
+ 9 - TRACE_B - Debug Trace interrupt
+ 10 - CDCMP - Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP - Initialization Complete Interrupt
+ 16 - SG SE - Soft Gemini - Sense enable interrupt
+ 17 - SG SD - Soft Gemini - Sense disable interrupt
+ 18 - -
+ 19 - -
+ 20 - -
+ 21- -
+ Default: 0x0001
+*==============================================*/
+ ACX_REG_INTERRUPT_MASK,
+
+/*=============================================
+ Host Interrupt Mask Set 16bit, (Write only)
+ ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+ ACX_REG_HINT_MASK_SET,
+
+/*=============================================
+ Host Interrupt Mask Clear 16bit,(Write only)
+ ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+ ACX_REG_HINT_MASK_CLR,
+
+/*=============================================
+ Host Interrupt Status Nondestructive Read
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+ ACX_REG_INTERRUPT_NO_CLEAR,
+
+/*=============================================
+ Host Interrupt Status Clear on Read Register
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+ ACX_REG_INTERRUPT_CLEAR,
+
+/*=============================================
+ Host Interrupt Acknowledge Register
+ 16bit,(Write only)
+ ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+ ACX_REG_INTERRUPT_ACK,
+
+/*===============================================
+ Host Software Reset - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 SOFT_RESET Soft Reset - When this bit is set,
+ it holds the Wlan hardware in a soft reset state.
+ This reset disables all MAC and baseband processor
+ clocks except the CardBus/PCI interface clock.
+ It also initializes all MAC state machines except
+ the host interface. It does not reload the
+ contents of the EEPROM. When this bit is cleared
+ (not self-clearing), the Wlan hardware
+ exits the software reset state.
+===============================================*/
+ ACX_REG_SLV_SOFT_RESET,
+
+/*===============================================
+ EEPROM Burst Read Start - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 ACX_EE_START - EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+ ACX_REG_EE_START,
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+ ACX_REG_ECPU_CONTROL,
+
+ ACX_REG_TABLE_LEN
+};
+
+#define ACX_SLV_SOFT_RESET_BIT BIT(0)
+#define ACX_REG_EEPROM_START_BIT BIT(0)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+ Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0)
+
+/*===============================================
+ Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR (SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX (ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG (RX_CFG)
+#define REG_RX_FILTER (RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS 0x2000
+#define RX_CFG_TSF 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+ | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+ | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+ | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+ | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+ | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+ | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE - EEPROM Write Request - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define ACX_EE_CTL_REG EE_CTL
+#define EE_WRITE 0x00000001ul
+#define EE_READ 0x00000002ul
+
+/*===============================================
+ EEPROM Address - 32bit RW
+ ------------------------------------------
+ This register specifies the address
+ within the EEPROM from/to which to read/write data.
+ ===============================================*/
+#define ACX_EE_ADDR_REG EE_ADDR
+
+/*===============================================
+ EEPROM Data - 32bit RW
+ ------------------------------------------
+ This register either holds the read 8 bits of
+ data from the EEPROM or the write data
+ to be written to the EEPROM.
+ ===============================================*/
+#define ACX_EE_DATA_REG EE_DATA
+
+/*===============================================
+ EEPROM Base Address - 32bit RW
+ ------------------------------------------
+ This register holds the upper nine bits
+ [23:15] of the 24-bit Wlan hardware memory
+ address for burst reads from EEPROM accesses.
+ The EEPROM provides the lower 15 bits of this address.
+ The MSB of the address from the EEPROM is ignored.
+ ===============================================*/
+#define ACX_EE_CFG EE_CFG
+
+/*===============================================
+ GPIO Output Values -32bit, RW
+ ------------------------------------------
+ [31:16] Reserved
+ [15: 0] Specify the output values (at the output driver inputs) for
+ GPIO[15:0], respectively.
+ ===============================================*/
+#define ACX_GPIO_OUT_REG GPIO_OUT
+#define ACX_MAX_GPIO_LINES 15
+
+/*===============================================
+ Contention window -32bit, RW
+ ------------------------------------------
+ [31:26] Reserved
+ [25:16] Max (0x3ff)
+ [15:07] Reserved
+ [06:00] Current contention window value - default is 0x1F
+ ===============================================*/
+#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK 0x0000007f
+#define ACX_CONT_WIND_MAX 0x03ff0000
+
+/*===============================================
+ HI_CFG Interface Configuration Register Values
+ ------------------------------------------
+ ===============================================*/
+#define HI_CFG_UART_ENABLE 0x00000004
+#define HI_CFG_RST232_ENABLE 0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
+#define HI_CFG_HOST_INT_ENABLE 0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ * for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2 0
+#define REF_FREQ_26_0 1
+#define REF_FREQ_38_4 2
+#define REF_FREQ_40_0 3
+#define REF_FREQ_33_6 4
+#define REF_FREQ_NUM 5
+
+#define LUT_PARAM_INTEGER_DIVIDER 0
+#define LUT_PARAM_FRACTIONAL_DIVIDER 1
+#define LUT_PARAM_ATTN_BB 2
+#define LUT_PARAM_ALPHA_BB 3
+#define LUT_PARAM_STOP_TIME_BB 4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER 5
+#define LUT_PARAM_NUM 6
+
+#define ACX_EEPROMLESS_IND_REG (SCR_PAD4)
+#define USE_EEPROM 0
+#define SOFT_RESET_MAX_TIME 1000000
+#define SOFT_RESET_STALL_TIME 1000
+#define NVS_DATA_BUNDARY_ALIGNMENT 4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE 512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT 0x00000101
+
+
+/******************************************************************************
+
+ CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+ RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */
+ RADIO_BAND_5GHZ = 1, /* 5 Ghz band */
+ RADIO_BAND_JAPAN_4_9_GHZ = 2,
+ DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+ INVALID_BAND = 0xFE,
+ MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+ NO_RATE = 0,
+ RATE_1MBPS = 0x0A,
+ RATE_2MBPS = 0x14,
+ RATE_5_5MBPS = 0x37,
+ RATE_6MBPS = 0x0B,
+ RATE_9MBPS = 0x0F,
+ RATE_11MBPS = 0x6E,
+ RATE_12MBPS = 0x0A,
+ RATE_18MBPS = 0x0E,
+ RATE_22MBPS = 0xDC,
+ RATE_24MBPS = 0x09,
+ RATE_36MBPS = 0x0D,
+ RATE_48MBPS = 0x08,
+ RATE_54MBPS = 0x0C
+};
+
+enum {
+ RATE_INDEX_1MBPS = 0,
+ RATE_INDEX_2MBPS = 1,
+ RATE_INDEX_5_5MBPS = 2,
+ RATE_INDEX_6MBPS = 3,
+ RATE_INDEX_9MBPS = 4,
+ RATE_INDEX_11MBPS = 5,
+ RATE_INDEX_12MBPS = 6,
+ RATE_INDEX_18MBPS = 7,
+ RATE_INDEX_22MBPS = 8,
+ RATE_INDEX_24MBPS = 9,
+ RATE_INDEX_36MBPS = 10,
+ RATE_INDEX_48MBPS = 11,
+ RATE_INDEX_54MBPS = 12,
+ RATE_INDEX_MAX = RATE_INDEX_54MBPS,
+ MAX_RATE_INDEX,
+ INVALID_RATE_INDEX = MAX_RATE_INDEX,
+ RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+ RATE_MASK_1MBPS = 0x1,
+ RATE_MASK_2MBPS = 0x2,
+ RATE_MASK_5_5MBPS = 0x4,
+ RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+enum {
+ CCK_LONG = 0,
+ CCK_SHORT = SHORT_PREAMBLE_BIT,
+ PBCC_LONG = PBCC_RATE_BIT,
+ PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+ OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15 - Indicates Preamble type (1=SHORT, 0=LONG).
+ Notes:
+ Must be LONG (0) for 1Mbps rate.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b14 - Indicates PBCC encoding (1=PBCC, 0=not).
+ Notes:
+ Does not apply (set to 0) for rates 1 and 2 Mbps.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b13 - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+/*************************************************************************
+
+ Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.c b/drivers/net/wireless/wl12xx/wl1251_rx.c
new file mode 100644
index 0000000..17c54b5
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_rx.c
@@ -0,0 +1,197 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_io.h"
+#include "wl1251_rx.h"
+#include "wl1251_cmd.h"
+#include "wl1251_acx.h"
+
+static void wl1251_rx_header(struct wl1251 *wl,
+ struct wl1251_rx_descriptor *desc)
+{
+ u32 rx_packet_ring_addr;
+
+ rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
+ if (wl->rx_current_buffer)
+ rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+ wl1251_mem_read(wl, rx_packet_ring_addr, desc, sizeof(*desc));
+}
+
+static void wl1251_rx_status(struct wl1251 *wl,
+ struct wl1251_rx_descriptor *desc,
+ struct ieee80211_rx_status *status,
+ u8 beacon)
+{
+ u64 mactime;
+ int ret;
+
+ memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+ status->band = IEEE80211_BAND_2GHZ;
+ status->mactime = desc->timestamp;
+
+ /*
+ * The rx status timestamp is a 32 bits value while the TSF is a
+ * 64 bits one.
+ * For IBSS merging, TSF is mandatory, so we have to get it
+ * somehow, so we ask for ACX_TSF_INFO.
+ * That could be moved to the get_tsf() hook, but unfortunately,
+ * this one must be atomic, while our SPI routines can sleep.
+ */
+ if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
+ ret = wl1251_acx_tsf_info(wl, &mactime);
+ if (ret == 0)
+ status->mactime = mactime;
+ }
+
+ status->signal = desc->rssi;
+ status->qual = (desc->rssi - WL1251_RX_MIN_RSSI) * 100 /
+ (WL1251_RX_MAX_RSSI - WL1251_RX_MIN_RSSI);
+ status->qual = min(status->qual, 100);
+ status->qual = max(status->qual, 0);
+
+ /*
+ * FIXME: guessing that snr needs to be divided by two, otherwise
+ * the values don't make any sense
+ */
+ status->noise = desc->rssi - desc->snr / 2;
+
+ status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+ status->flag |= RX_FLAG_TSFT;
+
+ if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
+ status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+ if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
+ status->flag |= RX_FLAG_DECRYPTED;
+
+ if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
+ status->flag |= RX_FLAG_MMIC_ERROR;
+ }
+
+ if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
+ status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+ /* FIXME: set status->rate_idx */
+}
+
+static void wl1251_rx_body(struct wl1251 *wl,
+ struct wl1251_rx_descriptor *desc)
+{
+ struct sk_buff *skb;
+ struct ieee80211_rx_status status;
+ u8 *rx_buffer, beacon = 0;
+ u16 length, *fc;
+ u32 curr_id, last_id_inc, rx_packet_ring_addr;
+
+ length = WL1251_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH);
+ curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
+ last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
+
+ if (last_id_inc != curr_id) {
+ wl1251_warning("curr ID:%d, last ID inc:%d",
+ curr_id, last_id_inc);
+ wl->rx_last_id = curr_id;
+ } else {
+ wl->rx_last_id = last_id_inc;
+ }
+
+ rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
+ sizeof(struct wl1251_rx_descriptor) + 20;
+ if (wl->rx_current_buffer)
+ rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+ skb = dev_alloc_skb(length);
+ if (!skb) {
+ wl1251_error("Couldn't allocate RX frame");
+ return;
+ }
+
+ rx_buffer = skb_put(skb, length);
+ wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
+
+ /* The actual lenght doesn't include the target's alignment */
+ skb->len = desc->length - PLCP_HEADER_LENGTH;
+
+ fc = (u16 *)skb->data;
+
+ if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+ beacon = 1;
+
+ wl1251_rx_status(wl, desc, &status, beacon);
+
+ wl1251_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+ beacon ? "beacon" : "");
+
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx(wl->hw, skb);
+}
+
+static void wl1251_rx_ack(struct wl1251 *wl)
+{
+ u32 data, addr;
+
+ if (wl->rx_current_buffer) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_RX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_RX_PROC0;
+ }
+
+ wl1251_reg_write32(wl, addr, data);
+
+ /* Toggle buffer ring */
+ wl->rx_current_buffer = !wl->rx_current_buffer;
+}
+
+
+void wl1251_rx(struct wl1251 *wl)
+{
+ struct wl1251_rx_descriptor *rx_desc;
+
+ if (wl->state != WL1251_STATE_ON)
+ return;
+
+ rx_desc = wl->rx_descriptor;
+
+ /* We first read the frame's header */
+ wl1251_rx_header(wl, rx_desc);
+
+ /* Now we can read the body */
+ wl1251_rx_body(wl, rx_desc);
+
+ /* Finally, we need to ACK the RX */
+ wl1251_rx_ack(wl);
+
+ return;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.h b/drivers/net/wireless/wl12xx/wl1251_rx.h
new file mode 100644
index 0000000..563a3fd
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_rx.h
@@ -0,0 +1,124 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_RX_H__
+#define __WL1251_RX_H__
+
+#include <linux/bitops.h>
+
+#include "wl1251.h"
+
+/*
+ * RX PATH
+ *
+ * The Rx path uses a double buffer and an rx_contro structure, each located
+ * at a fixed address in the device memory. The host keeps track of which
+ * buffer is available and alternates between them on a per packet basis.
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet.
+ * The RX path goes like that:
+ * 1) The target generates an interrupt each time a new packet is received.
+ * There are 2 RX interrupts, one for each buffer.
+ * 2) The host reads the received packet from one of the double buffers.
+ * 3) The host triggers a target interrupt.
+ * 4) The target prepares the next RX packet.
+ */
+
+#define WL1251_RX_MAX_RSSI -30
+#define WL1251_RX_MIN_RSSI -95
+
+#define WL1251_RX_ALIGN_TO 4
+#define WL1251_RX_ALIGN(len) (((len) + WL1251_RX_ALIGN_TO - 1) & \
+ ~(WL1251_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT BIT(0)
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define RX_DESC_VALID_FCS 0x0001
+#define RX_DESC_MATCH_RXADDR1 0x0002
+#define RX_DESC_MCAST 0x0004
+#define RX_DESC_STAINTIM 0x0008
+#define RX_DESC_VIRTUAL_BM 0x0010
+#define RX_DESC_BCAST 0x0020
+#define RX_DESC_MATCH_SSID 0x0040
+#define RX_DESC_MATCH_BSSID 0x0080
+#define RX_DESC_ENCRYPTION_MASK 0x0300
+#define RX_DESC_MEASURMENT 0x0400
+#define RX_DESC_SEQNUM_MASK 0x1800
+#define RX_DESC_MIC_FAIL 0x2000
+#define RX_DESC_DECRYPT_FAIL 0x4000
+
+struct wl1251_rx_descriptor {
+ u32 timestamp; /* In microseconds */
+ u16 length; /* Paylod length, including headers */
+ u16 flags;
+
+ /*
+ * 0 - 802.11
+ * 1 - 802.3
+ * 2 - IP
+ * 3 - Raw Codec
+ */
+ u8 type;
+
+ /*
+ * Received Rate:
+ * 0x0A - 1MBPS
+ * 0x14 - 2MBPS
+ * 0x37 - 5_5MBPS
+ * 0x0B - 6MBPS
+ * 0x0F - 9MBPS
+ * 0x6E - 11MBPS
+ * 0x0A - 12MBPS
+ * 0x0E - 18MBPS
+ * 0xDC - 22MBPS
+ * 0x09 - 24MBPS
+ * 0x0D - 36MBPS
+ * 0x08 - 48MBPS
+ * 0x0C - 54MBPS
+ */
+ u8 rate;
+
+ u8 mod_pre; /* Modulation and preamble */
+ u8 channel;
+
+ /*
+ * 0 - 2.4 Ghz
+ * 1 - 5 Ghz
+ */
+ u8 band;
+
+ s8 rssi; /* in dB */
+ u8 rcpi; /* in dB */
+ u8 snr; /* in dB */
+} __attribute__ ((packed));
+
+void wl1251_rx(struct wl1251 *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
new file mode 100644
index 0000000..9423f22
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -0,0 +1,205 @@
+/*
+ * wl12xx SDIO routines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * Copyright (C) 2005 Texas Instruments Incorporated
+ * Copyright (C) 2008 Google Inc
+ * Copyright (C) 2009 Bob Copeland (me@bobcopeland.com)
+ */
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/mod_devicetable.h>
+#include <linux/irq.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/platform_device.h>
+
+#include "wl1251.h"
+#include "wl12xx_80211.h"
+#include "wl1251_reg.h"
+#include "wl1251_ps.h"
+#include "wl1251_io.h"
+#include "wl1251_tx.h"
+#include "wl1251_debugfs.h"
+
+#ifndef SDIO_VENDOR_ID_TI
+#define SDIO_VENDOR_ID_TI 0x104c
+#endif
+
+#ifndef SDIO_DEVICE_ID_TI_WL1251
+#define SDIO_DEVICE_ID_TI_WL1251 0x9066
+#endif
+
+static struct sdio_func *wl_to_func(struct wl1251 *wl)
+{
+ return wl->if_priv;
+}
+
+static void wl1251_sdio_interrupt(struct sdio_func *func)
+{
+ struct wl1251 *wl = sdio_get_drvdata(func);
+
+ wl1251_debug(DEBUG_IRQ, "IRQ");
+
+ /* FIXME should be synchronous for sdio */
+ ieee80211_queue_work(wl->hw, &wl->irq_work);
+}
+
+static const struct sdio_device_id wl1251_devices[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1251) },
+ {}
+};
+MODULE_DEVICE_TABLE(sdio, wl1251_devices);
+
+
+void wl1251_sdio_read(struct wl1251 *wl, int addr, void *buf, size_t len)
+{
+ int ret;
+ struct sdio_func *func = wl_to_func(wl);
+
+ sdio_claim_host(func);
+ ret = sdio_memcpy_fromio(func, buf, addr, len);
+ if (ret)
+ wl1251_error("sdio read failed (%d)", ret);
+ sdio_release_host(func);
+}
+
+void wl1251_sdio_write(struct wl1251 *wl, int addr, void *buf, size_t len)
+{
+ int ret;
+ struct sdio_func *func = wl_to_func(wl);
+
+ sdio_claim_host(func);
+ ret = sdio_memcpy_toio(func, addr, buf, len);
+ if (ret)
+ wl1251_error("sdio write failed (%d)", ret);
+ sdio_release_host(func);
+}
+
+void wl1251_sdio_reset(struct wl1251 *wl)
+{
+}
+
+static void wl1251_sdio_enable_irq(struct wl1251 *wl)
+{
+ struct sdio_func *func = wl_to_func(wl);
+
+ sdio_claim_host(func);
+ sdio_claim_irq(func, wl1251_sdio_interrupt);
+ sdio_release_host(func);
+}
+
+static void wl1251_sdio_disable_irq(struct wl1251 *wl)
+{
+ struct sdio_func *func = wl_to_func(wl);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+}
+
+void wl1251_sdio_set_power(bool enable)
+{
+}
+
+struct wl1251_if_operations wl1251_sdio_ops = {
+ .read = wl1251_sdio_read,
+ .write = wl1251_sdio_write,
+ .reset = wl1251_sdio_reset,
+ .enable_irq = wl1251_sdio_enable_irq,
+ .disable_irq = wl1251_sdio_disable_irq,
+};
+
+int wl1251_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
+{
+ int ret;
+ struct wl1251 *wl;
+ struct ieee80211_hw *hw;
+
+ hw = wl1251_alloc_hw();
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ wl = hw->priv;
+
+ sdio_claim_host(func);
+ ret = sdio_enable_func(func);
+ if (ret)
+ goto release;
+
+ sdio_set_block_size(func, 512);
+
+ SET_IEEE80211_DEV(hw, &func->dev);
+ wl->if_priv = func;
+ wl->if_ops = &wl1251_sdio_ops;
+ wl->set_power = wl1251_sdio_set_power;
+
+ sdio_release_host(func);
+ ret = wl1251_init_ieee80211(wl);
+ if (ret)
+ goto disable;
+
+ sdio_set_drvdata(func, wl);
+ return ret;
+
+disable:
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+release:
+ sdio_release_host(func);
+ return ret;
+}
+
+static void __devexit wl1251_sdio_remove(struct sdio_func *func)
+{
+ struct wl1251 *wl = sdio_get_drvdata(func);
+
+ wl1251_free_hw(wl);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+}
+
+static struct sdio_driver wl1251_sdio_driver = {
+ .name = "wl1251_sdio",
+ .id_table = wl1251_devices,
+ .probe = wl1251_sdio_probe,
+ .remove = __devexit_p(wl1251_sdio_remove),
+};
+
+static int __init wl1251_sdio_init(void)
+{
+ int err;
+
+ err = sdio_register_driver(&wl1251_sdio_driver);
+ if (err)
+ wl1251_error("failed to register sdio driver: %d", err);
+ return err;
+}
+
+static void __exit wl1251_sdio_exit(void)
+{
+ sdio_unregister_driver(&wl1251_sdio_driver);
+ wl1251_notice("unloaded");
+}
+
+module_init(wl1251_sdio_init);
+module_exit(wl1251_sdio_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
new file mode 100644
index 0000000..14eff2b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -0,0 +1,344 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/wl12xx.h>
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_spi.h"
+
+static irqreturn_t wl1251_irq(int irq, void *cookie)
+{
+ struct wl1251 *wl;
+
+ wl1251_debug(DEBUG_IRQ, "IRQ");
+
+ wl = cookie;
+
+ ieee80211_queue_work(wl->hw, &wl->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static struct spi_device *wl_to_spi(struct wl1251 *wl)
+{
+ return wl->if_priv;
+}
+
+static void wl1251_spi_reset(struct wl1251 *wl)
+{
+ u8 *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl1251_error("could not allocate cmd for spi reset");
+ return;
+ }
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+static void wl1251_spi_wake(struct wl1251 *wl)
+{
+ u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl1251_error("could not allocate cmd for spi init");
+ return;
+ }
+
+ memset(crc, 0, sizeof(crc));
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ /*
+ * Set WSPI_INIT_COMMAND
+ * the data is being send from the MSB to LSB
+ */
+ cmd[2] = 0xff;
+ cmd[3] = 0xff;
+ cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+ cmd[0] = 0;
+ cmd[7] = 0;
+ cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+ cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+ if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+ cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
+ else
+ cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+ cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+ | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+ crc[0] = cmd[1];
+ crc[1] = cmd[0];
+ crc[2] = cmd[7];
+ crc[3] = cmd[6];
+ crc[4] = cmd[5];
+
+ cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+ cmd[4] |= WSPI_INIT_CMD_END;
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+static void wl1251_spi_reset_wake(struct wl1251 *wl)
+{
+ wl1251_spi_reset(wl);
+ wl1251_spi_wake(wl);
+}
+
+static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[3];
+ struct spi_message m;
+ u8 *busy_buf;
+ u32 *cmd;
+
+ cmd = &wl->buffer_cmd;
+ busy_buf = wl->buffer_busyword;
+
+ *cmd = 0;
+ *cmd |= WSPI_CMD_READ;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = 4;
+ spi_message_add_tail(&t[0], &m);
+
+ /* Busy and non busy words read */
+ t[1].rx_buf = busy_buf;
+ t[1].len = WL1251_BUSY_WORD_LEN;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = buf;
+ t[2].len = len;
+ spi_message_add_tail(&t[2], &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ /* FIXME: check busy words */
+
+ wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
+ wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u32 *cmd;
+
+ cmd = &wl->buffer_cmd;
+
+ *cmd = 0;
+ *cmd |= WSPI_CMD_WRITE;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(*cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
+ wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+static void wl1251_spi_enable_irq(struct wl1251 *wl)
+{
+ return enable_irq(wl->irq);
+}
+
+static void wl1251_spi_disable_irq(struct wl1251 *wl)
+{
+ return disable_irq(wl->irq);
+}
+
+static const struct wl1251_if_operations wl1251_spi_ops = {
+ .read = wl1251_spi_read,
+ .write = wl1251_spi_write,
+ .reset = wl1251_spi_reset_wake,
+ .enable_irq = wl1251_spi_enable_irq,
+ .disable_irq = wl1251_spi_disable_irq,
+};
+
+static int __devinit wl1251_spi_probe(struct spi_device *spi)
+{
+ struct wl12xx_platform_data *pdata;
+ struct ieee80211_hw *hw;
+ struct wl1251 *wl;
+ int ret;
+
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ wl1251_error("no platform data");
+ return -ENODEV;
+ }
+
+ hw = wl1251_alloc_hw();
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ wl = hw->priv;
+
+ SET_IEEE80211_DEV(hw, &spi->dev);
+ dev_set_drvdata(&spi->dev, wl);
+ wl->if_priv = spi;
+ wl->if_ops = &wl1251_spi_ops;
+
+ /* This is the only SPI value that we need to set here, the rest
+ * comes from the board-peripherals file */
+ spi->bits_per_word = 32;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ wl1251_error("spi_setup failed");
+ goto out_free;
+ }
+
+ wl->set_power = pdata->set_power;
+ if (!wl->set_power) {
+ wl1251_error("set power function missing in platform data");
+ return -ENODEV;
+ }
+
+ wl->irq = spi->irq;
+ if (wl->irq < 0) {
+ wl1251_error("irq missing in platform data");
+ return -ENODEV;
+ }
+
+ ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
+ if (ret < 0) {
+ wl1251_error("request_irq() failed: %d", ret);
+ goto out_free;
+ }
+
+ set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+ disable_irq(wl->irq);
+
+ ret = wl1251_init_ieee80211(wl);
+ if (ret)
+ goto out_irq;
+
+ return 0;
+
+ out_irq:
+ free_irq(wl->irq, wl);
+
+ out_free:
+ ieee80211_free_hw(hw);
+
+ return ret;
+}
+
+static int __devexit wl1251_spi_remove(struct spi_device *spi)
+{
+ struct wl1251 *wl = dev_get_drvdata(&spi->dev);
+
+ free_irq(wl->irq, wl);
+ wl1251_free_hw(wl);
+
+ return 0;
+}
+
+static struct spi_driver wl1251_spi_driver = {
+ .driver = {
+ .name = "wl12xx",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = wl1251_spi_probe,
+ .remove = __devexit_p(wl1251_spi_remove),
+};
+
+static int __init wl1251_spi_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&wl1251_spi_driver);
+ if (ret < 0) {
+ wl1251_error("failed to register spi driver: %d", ret);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit wl1251_spi_exit(void)
+{
+ spi_unregister_driver(&wl1251_spi_driver);
+
+ wl1251_notice("unloaded");
+}
+
+module_init(wl1251_spi_init);
+module_exit(wl1251_spi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.h b/drivers/net/wireless/wl12xx/wl1251_spi.h
new file mode 100644
index 0000000..2e273a9
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.h
@@ -0,0 +1,61 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_SPI_H__
+#define __WL1251_SPI_H__
+
+#include "wl1251_cmd.h"
+#include "wl1251_acx.h"
+#include "wl1251_reg.h"
+
+#define WSPI_CMD_READ 0x40000000
+#define WSPI_CMD_WRITE 0x00000000
+#define WSPI_CMD_FIXED 0x20000000
+#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
+#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN 5
+
+#define WSPI_INIT_CMD_START 0x00
+#define WSPI_INIT_CMD_TX 0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT 0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD 0x40
+#define WSPI_INIT_CMD_IP 0x20
+#define WSPI_INIT_CMD_CS 0x10
+#define WSPI_INIT_CMD_WS 0x08
+#define WSPI_INIT_CMD_WSPI 0x01
+#define WSPI_INIT_CMD_END 0x01
+
+#define WSPI_INIT_CMD_LEN 8
+
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+ ((WL1251_BUSY_WORD_LEN - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
+
+#endif /* __WL1251_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.c b/drivers/net/wireless/wl12xx/wl1251_tx.c
new file mode 100644
index 0000000..f859706
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.c
@@ -0,0 +1,559 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251.h"
+#include "wl1251_reg.h"
+#include "wl1251_tx.h"
+#include "wl1251_ps.h"
+#include "wl1251_io.h"
+
+static bool wl1251_tx_double_buffer_busy(struct wl1251 *wl, u32 data_out_count)
+{
+ int used, data_in_count;
+
+ data_in_count = wl->data_in_count;
+
+ if (data_in_count < data_out_count)
+ /* data_in_count has wrapped */
+ data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+ used = data_in_count - data_out_count;
+
+ WARN_ON(used < 0);
+ WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+ if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+ return true;
+ else
+ return false;
+}
+
+static int wl1251_tx_path_status(struct wl1251 *wl)
+{
+ u32 status, addr, data_out_count;
+ bool busy;
+
+ addr = wl->data_path->tx_control_addr;
+ status = wl1251_mem_read32(wl, addr);
+ data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+ busy = wl1251_tx_double_buffer_busy(wl, data_out_count);
+
+ if (busy)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int wl1251_tx_id(struct wl1251 *wl, struct sk_buff *skb)
+{
+ int i;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] == NULL) {
+ wl->tx_frames[i] = skb;
+ return i;
+ }
+
+ return -EBUSY;
+}
+
+static void wl1251_tx_control(struct tx_double_buffer_desc *tx_hdr,
+ struct ieee80211_tx_info *control, u16 fc)
+{
+ *(u16 *)&tx_hdr->control = 0;
+
+ tx_hdr->control.rate_policy = 0;
+
+ /* 802.11 packets */
+ tx_hdr->control.packet_type = 0;
+
+ if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+ tx_hdr->control.ack_policy = 1;
+
+ tx_hdr->control.tx_complete = 1;
+
+ if ((fc & IEEE80211_FTYPE_DATA) &&
+ ((fc & IEEE80211_STYPE_QOS_DATA) ||
+ (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+ tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH 16
+#define MAX_MPDU_SECURITY_LENGTH 16
+#define WLAN_QOS_HDR_LEN 26
+#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \
+ WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE 252
+static void wl1251_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+ u16 payload_len, frag_threshold, mem_blocks;
+ u16 num_mpdus, mem_blocks_per_frag;
+
+ frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+ payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+
+ if (payload_len > frag_threshold) {
+ mem_blocks_per_frag =
+ ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+ HW_BLOCK_SIZE) + 1;
+ num_mpdus = payload_len / frag_threshold;
+ mem_blocks = num_mpdus * mem_blocks_per_frag;
+ payload_len -= num_mpdus * frag_threshold;
+ num_mpdus++;
+
+ } else {
+ mem_blocks_per_frag = 0;
+ mem_blocks = 0;
+ num_mpdus = 1;
+ }
+
+ mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+ if (num_mpdus > 1)
+ mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+ tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl1251_tx_fill_hdr(struct wl1251 *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ struct ieee80211_rate *rate;
+ int id;
+ u16 fc;
+
+ if (!skb)
+ return -EINVAL;
+
+ id = wl1251_tx_id(wl, skb);
+ if (id < 0)
+ return id;
+
+ fc = *(u16 *)skb->data;
+ tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+ sizeof(*tx_hdr));
+
+ tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+ rate = ieee80211_get_tx_rate(wl->hw, control);
+ tx_hdr->rate = cpu_to_le16(rate->hw_value);
+ tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+ tx_hdr->id = id;
+
+ /* FIXME: how to get the correct queue id? */
+ tx_hdr->xmit_queue = 0;
+
+ wl1251_tx_control(tx_hdr, control, fc);
+ wl1251_tx_frag_block_num(tx_hdr);
+
+ return 0;
+}
+
+/* We copy the packet to the target */
+static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ int len;
+ u32 addr;
+
+ if (!skb)
+ return -EINVAL;
+
+ tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+ if (control->control.hw_key &&
+ control->control.hw_key->alg == ALG_TKIP) {
+ int hdrlen;
+ u16 fc;
+ u8 *pos;
+
+ fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
+ tx_hdr->length += WL1251_TKIP_IV_SPACE;
+
+ hdrlen = ieee80211_hdrlen(fc);
+
+ pos = skb_push(skb, WL1251_TKIP_IV_SPACE);
+ memmove(pos, pos + WL1251_TKIP_IV_SPACE,
+ sizeof(*tx_hdr) + hdrlen);
+ }
+
+ /* Revisit. This is a workaround for getting non-aligned packets.
+ This happens at least with EAPOL packets from the user space.
+ Our DMA requires packets to be aligned on a 4-byte boundary.
+ */
+ if (unlikely((long)skb->data & 0x03)) {
+ int offset = (4 - (long)skb->data) & 0x03;
+ wl1251_debug(DEBUG_TX, "skb offset %d", offset);
+
+ /* check whether the current skb can be used */
+ if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+ unsigned char *src = skb->data;
+
+ /* align the buffer on a 4-byte boundary */
+ skb_reserve(skb, offset);
+ memmove(skb->data, src, skb->len);
+ } else {
+ wl1251_info("No handler, fixme!");
+ return -EINVAL;
+ }
+ }
+
+ /* Our skb->data at this point includes the HW header */
+ len = WL1251_TX_ALIGN(skb->len);
+
+ if (wl->data_in_count & 0x1)
+ addr = wl->data_path->tx_packet_ring_addr +
+ wl->data_path->tx_packet_ring_chunk_size;
+ else
+ addr = wl->data_path->tx_packet_ring_addr;
+
+ wl1251_mem_write(wl, addr, skb->data, len);
+
+ wl1251_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
+ tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+
+ return 0;
+}
+
+static void wl1251_tx_trigger(struct wl1251 *wl)
+{
+ u32 data, addr;
+
+ if (wl->data_in_count & 0x1) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_TX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_TX_PROC0;
+ }
+
+ wl1251_reg_write32(wl, addr, data);
+
+ /* Bumping data in */
+ wl->data_in_count = (wl->data_in_count + 1) &
+ TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl1251_tx_frame(struct wl1251 *wl, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info;
+ int ret = 0;
+ u8 idx;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.hw_key) {
+ idx = info->control.hw_key->hw_key_idx;
+ if (unlikely(wl->default_key != idx)) {
+ ret = wl1251_acx_default_key(wl, idx);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ ret = wl1251_tx_path_status(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_tx_fill_hdr(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1251_tx_send_packet(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ wl1251_tx_trigger(wl);
+
+ return ret;
+}
+
+void wl1251_tx_work(struct work_struct *work)
+{
+ struct wl1251 *wl = container_of(work, struct wl1251, tx_work);
+ struct sk_buff *skb;
+ bool woken_up = false;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state == WL1251_STATE_OFF))
+ goto out;
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ if (!woken_up) {
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
+ woken_up = true;
+ }
+
+ ret = wl1251_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is full, stop queues */
+ wl1251_debug(DEBUG_TX, "tx_work: fw buffer full, "
+ "stop queues");
+ ieee80211_stop_queues(wl->hw);
+ wl->tx_queue_stopped = true;
+ skb_queue_head(&wl->tx_queue, skb);
+ goto out;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ goto out;
+ }
+ }
+
+out:
+ if (woken_up)
+ wl1251_ps_elp_sleep(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static const char *wl1251_tx_parse_status(u8 status)
+{
+ /* 8 bit status field, one character per bit plus null */
+ static char buf[9];
+ int i = 0;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (status & TX_DMA_ERROR)
+ buf[i++] = 'm';
+ if (status & TX_DISABLED)
+ buf[i++] = 'd';
+ if (status & TX_RETRY_EXCEEDED)
+ buf[i++] = 'r';
+ if (status & TX_TIMEOUT)
+ buf[i++] = 't';
+ if (status & TX_KEY_NOT_FOUND)
+ buf[i++] = 'k';
+ if (status & TX_ENCRYPT_FAIL)
+ buf[i++] = 'e';
+ if (status & TX_UNAVAILABLE_PRIORITY)
+ buf[i++] = 'p';
+
+ /* bit 0 is unused apparently */
+
+ return buf;
+}
+
+static void wl1251_tx_packet_cb(struct wl1251 *wl,
+ struct tx_result *result)
+{
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+ int hdrlen, ret;
+ u8 *frame;
+
+ skb = wl->tx_frames[result->id];
+ if (skb == NULL) {
+ wl1251_error("SKB for packet %d is NULL", result->id);
+ return;
+ }
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (result->status == TX_SUCCESS))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = result->ack_failures + 1;
+ wl->stats.retry_count += result->ack_failures;
+
+ /*
+ * We have to remove our private TX header before pushing
+ * the skb back to mac80211.
+ */
+ frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+ if (info->control.hw_key &&
+ info->control.hw_key->alg == ALG_TKIP) {
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ memmove(frame + WL1251_TKIP_IV_SPACE, frame, hdrlen);
+ skb_pull(skb, WL1251_TKIP_IV_SPACE);
+ }
+
+ wl1251_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+ " status 0x%x (%s)",
+ result->id, skb, result->ack_failures, result->rate,
+ result->status, wl1251_tx_parse_status(result->status));
+
+
+ ieee80211_tx_status(wl->hw, skb);
+
+ wl->tx_frames[result->id] = NULL;
+
+ if (wl->tx_queue_stopped) {
+ wl1251_debug(DEBUG_TX, "cb: queue was stopped");
+
+ skb = skb_dequeue(&wl->tx_queue);
+
+ /* The skb can be NULL because tx_work might have been
+ scheduled before the queue was stopped making the
+ queue empty */
+
+ if (skb) {
+ ret = wl1251_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is still full */
+ wl1251_debug(DEBUG_TX, "cb: fw buffer "
+ "still full");
+ skb_queue_head(&wl->tx_queue, skb);
+ return;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
+ wl1251_debug(DEBUG_TX, "cb: waking queues");
+ ieee80211_wake_queues(wl->hw);
+ wl->tx_queue_stopped = false;
+ }
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl1251_tx_complete(struct wl1251 *wl)
+{
+ int i, result_index, num_complete = 0;
+ struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+
+ if (unlikely(wl->state != WL1251_STATE_ON))
+ return;
+
+ /* First we read the result */
+ wl1251_mem_read(wl, wl->data_path->tx_complete_addr,
+ result, sizeof(result));
+
+ result_index = wl->next_tx_complete;
+
+ for (i = 0; i < ARRAY_SIZE(result); i++) {
+ result_ptr = &result[result_index];
+
+ if (result_ptr->done_1 == 1 &&
+ result_ptr->done_2 == 1) {
+ wl1251_tx_packet_cb(wl, result_ptr);
+
+ result_ptr->done_1 = 0;
+ result_ptr->done_2 = 0;
+
+ result_index = (result_index + 1) &
+ (FW_TX_CMPLT_BLOCK_SIZE - 1);
+ num_complete++;
+ } else {
+ break;
+ }
+ }
+
+ /* Every completed frame needs to be acknowledged */
+ if (num_complete) {
+ /*
+ * If we've wrapped, we have to clear
+ * the results in 2 steps.
+ */
+ if (result_index > wl->next_tx_complete) {
+ /* Only 1 write is needed */
+ wl1251_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ num_complete *
+ sizeof(struct tx_result));
+
+
+ } else if (result_index < wl->next_tx_complete) {
+ /* 2 writes are needed */
+ wl1251_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ (FW_TX_CMPLT_BLOCK_SIZE -
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ wl1251_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ (num_complete -
+ FW_TX_CMPLT_BLOCK_SIZE +
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ } else {
+ /* We have to write the whole array */
+ wl1251_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ FW_TX_CMPLT_BLOCK_SIZE *
+ sizeof(struct tx_result));
+ }
+
+ }
+
+ wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl1251_tx_flush(struct wl1251 *wl)
+{
+ int i;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+
+ /* TX failure */
+/* control->flags = 0; FIXME */
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ info = IEEE80211_SKB_CB(skb);
+
+ wl1251_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ }
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] != NULL) {
+ skb = wl->tx_frames[i];
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ wl->tx_frames[i] = NULL;
+ }
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.h b/drivers/net/wireless/wl12xx/wl1251_tx.h
new file mode 100644
index 0000000..7c1c166
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.h
@@ -0,0 +1,216 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_TX_H__
+#define __WL1251_TX_H__
+
+#include <linux/bitops.h>
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ * buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ * buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ * the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ * transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ * and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ * host to process the new data. Note: interrupt will be send per packet if
+ * TX complete indication was requested in tx_control or per crossing
+ * aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ * TxDescriptorDone information in a cyclic manner and clears both done_1
+ * and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT 0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
+
+#define WL1251_TX_ALIGN_TO 4
+#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
+ ~(WL1251_TX_ALIGN_TO - 1))
+#define WL1251_TKIP_IV_SPACE 4
+
+struct tx_control {
+ /* Rate Policy (class) index */
+ unsigned rate_policy:3;
+
+ /* When set, no ack policy is expected */
+ unsigned ack_policy:1;
+
+ /*
+ * Packet type:
+ * 0 -> 802.11
+ * 1 -> 802.3
+ * 2 -> IP
+ * 3 -> raw codec
+ */
+ unsigned packet_type:2;
+
+ /* If set, this is a QoS-Null or QoS-Data frame */
+ unsigned qos:1;
+
+ /*
+ * If set, the target triggers the tx complete INT
+ * upon frame sending completion.
+ */
+ unsigned tx_complete:1;
+
+ /* 2 bytes padding before packet header */
+ unsigned xfer_pad:1;
+
+ unsigned reserved:7;
+} __attribute__ ((packed));
+
+
+struct tx_double_buffer_desc {
+ /* Length of payload, including headers. */
+ u16 length;
+
+ /*
+ * A bit mask that specifies the initial rate to be used
+ * Possible values are:
+ * 0x0001 - 1Mbits
+ * 0x0002 - 2Mbits
+ * 0x0004 - 5.5Mbits
+ * 0x0008 - 6Mbits
+ * 0x0010 - 9Mbits
+ * 0x0020 - 11Mbits
+ * 0x0040 - 12Mbits
+ * 0x0080 - 18Mbits
+ * 0x0100 - 22Mbits
+ * 0x0200 - 24Mbits
+ * 0x0400 - 36Mbits
+ * 0x0800 - 48Mbits
+ * 0x1000 - 54Mbits
+ */
+ u16 rate;
+
+ /* Time in us that a packet can spend in the target */
+ u32 expiry_time;
+
+ /* index of the TX queue used for this packet */
+ u8 xmit_queue;
+
+ /* Used to identify a packet */
+ u8 id;
+
+ struct tx_control control;
+
+ /*
+ * The FW should cut the packet into fragments
+ * of this size.
+ */
+ u16 frag_threshold;
+
+ /* Numbers of HW queue blocks to be allocated */
+ u8 num_mem_blocks;
+
+ u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+ TX_SUCCESS = 0,
+ TX_DMA_ERROR = BIT(7),
+ TX_DISABLED = BIT(6),
+ TX_RETRY_EXCEEDED = BIT(5),
+ TX_TIMEOUT = BIT(4),
+ TX_KEY_NOT_FOUND = BIT(3),
+ TX_ENCRYPT_FAIL = BIT(2),
+ TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+ /*
+ * Ownership synchronization between the host and
+ * the firmware. If done_1 and done_2 are cleared,
+ * owned by the FW (no info ready).
+ */
+ u8 done_1;
+
+ /* same as double_buffer_desc->id */
+ u8 id;
+
+ /*
+ * Total air access duration consumed by this
+ * packet, including all retries and overheads.
+ */
+ u16 medium_usage;
+
+ /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+ u32 medium_delay;
+
+ /* Time between host xfer and tx complete */
+ u32 fw_hnadling_time;
+
+ /* The LS-byte of the last TKIP sequence number. */
+ u8 lsb_seq_num;
+
+ /* Retry count */
+ u8 ack_failures;
+
+ /* At which rate we got a ACK */
+ u16 rate;
+
+ u16 reserved;
+
+ /* TX_* */
+ u8 status;
+
+ /* See done_1 */
+ u8 done_2;
+} __attribute__ ((packed));
+
+void wl1251_tx_work(struct work_struct *work);
+void wl1251_tx_complete(struct wl1251 *wl);
+void wl1251_tx_flush(struct wl1251 *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
new file mode 100644
index 0000000..55818f9
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -0,0 +1,407 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_H__
+#define __WL1271_H__
+
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <net/mac80211.h>
+
+#define DRIVER_NAME "wl1271"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+ DEBUG_NONE = 0,
+ DEBUG_IRQ = BIT(0),
+ DEBUG_SPI = BIT(1),
+ DEBUG_BOOT = BIT(2),
+ DEBUG_MAILBOX = BIT(3),
+ DEBUG_NETLINK = BIT(4),
+ DEBUG_EVENT = BIT(5),
+ DEBUG_TX = BIT(6),
+ DEBUG_RX = BIT(7),
+ DEBUG_SCAN = BIT(8),
+ DEBUG_CRYPT = BIT(9),
+ DEBUG_PSM = BIT(10),
+ DEBUG_MAC80211 = BIT(11),
+ DEBUG_CMD = BIT(12),
+ DEBUG_ACX = BIT(13),
+ DEBUG_ALL = ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl1271_error(fmt, arg...) \
+ printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl1271_warning(fmt, arg...) \
+ printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl1271_notice(fmt, arg...) \
+ printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1271_info(fmt, arg...) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1271_debug(level, fmt, arg...) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+ } while (0)
+
+#define wl1271_dump(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ 0); \
+ } while (0)
+
+#define wl1271_dump_ascii(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ true); \
+ } while (0)
+
+#define WL1271_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
+ CFG_BSSID_FILTER_EN)
+
+#define WL1271_DEFAULT_RX_FILTER (CFG_RX_RCTS_ACK | CFG_RX_PRSP_EN | \
+ CFG_RX_MGMT_EN | CFG_RX_DATA_EN | \
+ CFG_RX_CTL_EN | CFG_RX_BCN_EN | \
+ CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define WL1271_FW_NAME "wl1271-fw.bin"
+#define WL1271_NVS_NAME "wl1271-nvs.bin"
+
+#define WL1271_BUSY_WORD_LEN 8
+
+#define WL1271_ELP_HW_STATE_ASLEEP 0
+#define WL1271_ELP_HW_STATE_IRQ 1
+
+enum wl1271_state {
+ WL1271_STATE_OFF,
+ WL1271_STATE_ON,
+ WL1271_STATE_PLT,
+};
+
+enum wl1271_partition_type {
+ PART_DOWN,
+ PART_WORK,
+ PART_DRPW,
+
+ PART_TABLE_LEN
+};
+
+struct wl1271_partition {
+ u32 size;
+ u32 start;
+};
+
+struct wl1271_partition_set {
+ struct wl1271_partition mem;
+ struct wl1271_partition reg;
+};
+
+struct wl1271;
+
+/* FIXME: I'm not sure about this structure name */
+struct wl1271_chip {
+ u32 id;
+ char fw_ver[21];
+};
+
+struct wl1271_stats {
+ struct acx_statistics *fw_stats;
+ unsigned long fw_stats_update;
+
+ unsigned int retry_count;
+ unsigned int excessive_retries;
+};
+
+struct wl1271_debugfs {
+ struct dentry *rootdir;
+ struct dentry *fw_statistics;
+
+ struct dentry *tx_internal_desc_overflow;
+
+ struct dentry *rx_out_of_mem;
+ struct dentry *rx_hdr_overflow;
+ struct dentry *rx_hw_stuck;
+ struct dentry *rx_dropped;
+ struct dentry *rx_fcs_err;
+ struct dentry *rx_xfr_hint_trig;
+ struct dentry *rx_path_reset;
+ struct dentry *rx_reset_counter;
+
+ struct dentry *dma_rx_requested;
+ struct dentry *dma_rx_errors;
+ struct dentry *dma_tx_requested;
+ struct dentry *dma_tx_errors;
+
+ struct dentry *isr_cmd_cmplt;
+ struct dentry *isr_fiqs;
+ struct dentry *isr_rx_headers;
+ struct dentry *isr_rx_mem_overflow;
+ struct dentry *isr_rx_rdys;
+ struct dentry *isr_irqs;
+ struct dentry *isr_tx_procs;
+ struct dentry *isr_decrypt_done;
+ struct dentry *isr_dma0_done;
+ struct dentry *isr_dma1_done;
+ struct dentry *isr_tx_exch_complete;
+ struct dentry *isr_commands;
+ struct dentry *isr_rx_procs;
+ struct dentry *isr_hw_pm_mode_changes;
+ struct dentry *isr_host_acknowledges;
+ struct dentry *isr_pci_pm;
+ struct dentry *isr_wakeups;
+ struct dentry *isr_low_rssi;
+
+ struct dentry *wep_addr_key_count;
+ struct dentry *wep_default_key_count;
+ /* skipping wep.reserved */
+ struct dentry *wep_key_not_found;
+ struct dentry *wep_decrypt_fail;
+ struct dentry *wep_packets;
+ struct dentry *wep_interrupt;
+
+ struct dentry *pwr_ps_enter;
+ struct dentry *pwr_elp_enter;
+ struct dentry *pwr_missing_bcns;
+ struct dentry *pwr_wake_on_host;
+ struct dentry *pwr_wake_on_timer_exp;
+ struct dentry *pwr_tx_with_ps;
+ struct dentry *pwr_tx_without_ps;
+ struct dentry *pwr_rcvd_beacons;
+ struct dentry *pwr_power_save_off;
+ struct dentry *pwr_enable_ps;
+ struct dentry *pwr_disable_ps;
+ struct dentry *pwr_fix_tsf_ps;
+ /* skipping cont_miss_bcns_spread for now */
+ struct dentry *pwr_rcvd_awake_beacons;
+
+ struct dentry *mic_rx_pkts;
+ struct dentry *mic_calc_failure;
+
+ struct dentry *aes_encrypt_fail;
+ struct dentry *aes_decrypt_fail;
+ struct dentry *aes_encrypt_packets;
+ struct dentry *aes_decrypt_packets;
+ struct dentry *aes_encrypt_interrupt;
+ struct dentry *aes_decrypt_interrupt;
+
+ struct dentry *event_heart_beat;
+ struct dentry *event_calibration;
+ struct dentry *event_rx_mismatch;
+ struct dentry *event_rx_mem_empty;
+ struct dentry *event_rx_pool;
+ struct dentry *event_oom_late;
+ struct dentry *event_phy_transmit_error;
+ struct dentry *event_tx_stuck;
+
+ struct dentry *ps_pspoll_timeouts;
+ struct dentry *ps_upsd_timeouts;
+ struct dentry *ps_upsd_max_sptime;
+ struct dentry *ps_upsd_max_apturn;
+ struct dentry *ps_pspoll_max_apturn;
+ struct dentry *ps_pspoll_utilization;
+ struct dentry *ps_upsd_utilization;
+
+ struct dentry *rxpipe_rx_prep_beacon_drop;
+ struct dentry *rxpipe_descr_host_int_trig_rx_data;
+ struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+ struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+ struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+ struct dentry *tx_queue_len;
+
+ struct dentry *retry_count;
+ struct dentry *excessive_retries;
+};
+
+#define NUM_TX_QUEUES 4
+#define NUM_RX_PKT_DESC 8
+
+/* FW status registers */
+struct wl1271_fw_status {
+ u32 intr;
+ u8 fw_rx_counter;
+ u8 drv_rx_counter;
+ u8 reserved;
+ u8 tx_results_counter;
+ u32 rx_pkt_descs[NUM_RX_PKT_DESC];
+ u32 tx_released_blks[NUM_TX_QUEUES];
+ u32 fw_localtime;
+ u32 padding[2];
+} __attribute__ ((packed));
+
+struct wl1271_rx_mem_pool_addr {
+ u32 addr;
+ u32 addr_extra;
+};
+
+struct wl1271 {
+ struct ieee80211_hw *hw;
+ bool mac80211_registered;
+
+ struct spi_device *spi;
+
+ void (*set_power)(bool enable);
+ int irq;
+
+ spinlock_t wl_lock;
+
+ enum wl1271_state state;
+ struct mutex mutex;
+
+ int physical_mem_addr;
+ int physical_reg_addr;
+ int virtual_mem_addr;
+ int virtual_reg_addr;
+
+ struct wl1271_chip chip;
+
+ int cmd_box_addr;
+ int event_box_addr;
+
+ u8 *fw;
+ size_t fw_len;
+ u8 *nvs;
+ size_t nvs_len;
+
+ u8 bssid[ETH_ALEN];
+ u8 mac_addr[ETH_ALEN];
+ u8 bss_type;
+ u8 ssid[IW_ESSID_MAX_SIZE + 1];
+ u8 ssid_len;
+ u8 listen_int;
+ int channel;
+
+ struct wl1271_acx_mem_map *target_mem_map;
+
+ /* Accounting for allocated / available TX blocks on HW */
+ u32 tx_blocks_freed[NUM_TX_QUEUES];
+ u32 tx_blocks_available;
+ u8 tx_results_count;
+
+ /* Transmitted TX packets counter for chipset interface */
+ int tx_packets_count;
+
+ /* Time-offset between host and chipset clocks */
+ int time_offset;
+
+ /* Session counter for the chipset */
+ int session_counter;
+
+ /* Frames scheduled for transmission, not handled yet */
+ struct sk_buff_head tx_queue;
+ bool tx_queue_stopped;
+
+ struct work_struct tx_work;
+ struct work_struct filter_work;
+
+ /* Pending TX frames */
+ struct sk_buff *tx_frames[16];
+
+ /* FW Rx counter */
+ u32 rx_counter;
+
+ /* Rx memory pool address */
+ struct wl1271_rx_mem_pool_addr rx_mem_pool_addr;
+
+ /* The target interrupt mask */
+ struct work_struct irq_work;
+
+ /* The mbox event mask */
+ u32 event_mask;
+
+ /* Mailbox pointers */
+ u32 mbox_ptr[2];
+
+ /* Are we currently scanning */
+ bool scanning;
+
+ /* Our association ID */
+ u16 aid;
+
+ /* Default key (for WEP) */
+ u32 default_key;
+
+ unsigned int rx_config;
+ unsigned int rx_filter;
+
+ /* is firmware in elp mode */
+ bool elp;
+
+ struct completion *elp_compl;
+
+ /* we can be in psm, but not in elp, we have to differentiate */
+ bool psm;
+
+ /* PSM mode requested */
+ bool psm_requested;
+
+ /* in dBm */
+ int power_level;
+
+ struct wl1271_stats stats;
+ struct wl1271_debugfs debugfs;
+
+ u32 buffer_32;
+ u32 buffer_cmd;
+ u8 buffer_busyword[WL1271_BUSY_WORD_LEN];
+ struct wl1271_rx_descriptor *rx_descriptor;
+
+ struct wl1271_fw_status *fw_status;
+ struct wl1271_tx_hw_res_if *tx_res_if;
+};
+
+int wl1271_plt_start(struct wl1271 *wl);
+int wl1271_plt_stop(struct wl1271 *wl);
+
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define SESSION_COUNTER_MAX 7 /* maximum value for the session counter */
+
+#define WL1271_DEFAULT_POWER_LEVEL 0
+
+#define WL1271_TX_QUEUE_MAX_LENGTH 20
+
+/* WL1271 needs a 200ms sleep after power on */
+#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
new file mode 100644
index 0000000..f622a40
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -0,0 +1,961 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1271_acx.h"
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl1271.h"
+#include "wl12xx_80211.h"
+#include "wl1271_reg.h"
+#include "wl1271_spi.h"
+#include "wl1271_ps.h"
+
+int wl1271_acx_wake_up_conditions(struct wl1271 *wl, u8 wake_up_event,
+ u8 listen_interval)
+{
+ struct acx_wake_up_condition *wake_up;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx wake up conditions");
+
+ wake_up = kzalloc(sizeof(*wake_up), GFP_KERNEL);
+ if (!wake_up) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wake_up->wake_up_event = wake_up_event;
+ wake_up->listen_interval = listen_interval;
+
+ ret = wl1271_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS,
+ wake_up, sizeof(*wake_up));
+ if (ret < 0) {
+ wl1271_warning("could not set wake up conditions: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(wake_up);
+ return ret;
+}
+
+int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
+{
+ struct acx_sleep_auth *auth;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx sleep auth");
+
+ auth = kzalloc(sizeof(*auth), GFP_KERNEL);
+ if (!auth) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ auth->sleep_auth = sleep_auth;
+
+ ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
+ if (ret < 0)
+ return ret;
+
+out:
+ kfree(auth);
+ return ret;
+}
+
+int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len)
+{
+ struct acx_revision *rev;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx fw rev");
+
+ rev = kzalloc(sizeof(*rev), GFP_KERNEL);
+ if (!rev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = wl1271_cmd_interrogate(wl, ACX_FW_REV, rev, sizeof(*rev));
+ if (ret < 0) {
+ wl1271_warning("ACX_FW_REV interrogate failed");
+ goto out;
+ }
+
+ /* be careful with the buffer sizes */
+ strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+ /*
+ * if the firmware version string is exactly
+ * sizeof(rev->fw_version) long or fw_len is less than
+ * sizeof(rev->fw_version) it won't be null terminated
+ */
+ buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+out:
+ kfree(rev);
+ return ret;
+}
+
+int wl1271_acx_tx_power(struct wl1271 *wl, int power)
+{
+ struct acx_current_tx_power *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+ if (power < 0 || power > 25)
+ return -EINVAL;
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->current_tx_power = power * 10;
+
+ ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("configure of tx power failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_feature_cfg(struct wl1271 *wl)
+{
+ struct acx_feature_config *feature;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx feature cfg");
+
+ feature = kzalloc(sizeof(*feature), GFP_KERNEL);
+ if (!feature) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+ feature->data_flow_options = 0;
+ feature->options = 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_FEATURE_CFG,
+ feature, sizeof(*feature));
+ if (ret < 0) {
+ wl1271_error("Couldnt set HW encryption");
+ goto out;
+ }
+
+out:
+ kfree(feature);
+ return ret;
+}
+
+int wl1271_acx_mem_map(struct wl1271 *wl, struct acx_header *mem_map,
+ size_t len)
+{
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx mem map");
+
+ ret = wl1271_cmd_interrogate(wl, ACX_MEM_MAP, mem_map, len);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl, u32 life_time)
+{
+ struct acx_rx_msdu_lifetime *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx rx msdu life time");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->lifetime = life_time;
+ ret = wl1271_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME,
+ acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("failed to set rx msdu life time: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter)
+{
+ struct acx_rx_config *rx_config;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx rx config");
+
+ rx_config = kzalloc(sizeof(*rx_config), GFP_KERNEL);
+ if (!rx_config) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rx_config->config_options = config;
+ rx_config->filter_options = filter;
+
+ ret = wl1271_cmd_configure(wl, ACX_RX_CFG,
+ rx_config, sizeof(*rx_config));
+ if (ret < 0) {
+ wl1271_warning("failed to set rx config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(rx_config);
+ return ret;
+}
+
+int wl1271_acx_pd_threshold(struct wl1271 *wl)
+{
+ struct acx_packet_detection *pd;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx data pd threshold");
+
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* FIXME: threshold value not set */
+
+ ret = wl1271_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd));
+ if (ret < 0) {
+ wl1271_warning("failed to set pd threshold: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(pd);
+ return 0;
+}
+
+int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time)
+{
+ struct acx_slot *slot;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx slot");
+
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ slot->wone_index = STATION_WONE_INDEX;
+ slot->slot_time = slot_time;
+
+ ret = wl1271_cmd_configure(wl, ACX_SLOT, slot, sizeof(*slot));
+ if (ret < 0) {
+ wl1271_warning("failed to set slot time: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(slot);
+ return ret;
+}
+
+int wl1271_acx_group_address_tbl(struct wl1271 *wl)
+{
+ struct acx_dot11_grp_addr_tbl *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx group address tbl");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* MAC filtering */
+ acx->enabled = 0;
+ acx->num_groups = 0;
+ memset(acx->mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+ ret = wl1271_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL,
+ acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("failed to set group addr table: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_service_period_timeout(struct wl1271 *wl)
+{
+ struct acx_rx_timeout *rx_timeout;
+ int ret;
+
+ rx_timeout = kzalloc(sizeof(*rx_timeout), GFP_KERNEL);
+ if (!rx_timeout) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_ACX, "acx service period timeout");
+
+ rx_timeout->ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+ rx_timeout->upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+ ret = wl1271_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT,
+ rx_timeout, sizeof(*rx_timeout));
+ if (ret < 0) {
+ wl1271_warning("failed to set service period timeout: %d",
+ ret);
+ goto out;
+ }
+
+out:
+ kfree(rx_timeout);
+ return ret;
+}
+
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold)
+{
+ struct acx_rts_threshold *rts;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx rts threshold");
+
+ rts = kzalloc(sizeof(*rts), GFP_KERNEL);
+ if (!rts) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rts->threshold = rts_threshold;
+
+ ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
+ if (ret < 0) {
+ wl1271_warning("failed to set rts threshold: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(rts);
+ return ret;
+}
+
+int wl1271_acx_beacon_filter_opt(struct wl1271 *wl)
+{
+ struct acx_beacon_filter_option *beacon_filter;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx beacon filter opt");
+
+ beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL);
+ if (!beacon_filter) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ beacon_filter->enable = 0;
+ beacon_filter->max_num_beacons = 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_OPT,
+ beacon_filter, sizeof(*beacon_filter));
+ if (ret < 0) {
+ wl1271_warning("failed to set beacon filter opt: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(beacon_filter);
+ return ret;
+}
+
+int wl1271_acx_beacon_filter_table(struct wl1271 *wl)
+{
+ struct acx_beacon_filter_ie_table *ie_table;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx beacon filter table");
+
+ ie_table = kzalloc(sizeof(*ie_table), GFP_KERNEL);
+ if (!ie_table) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ie_table->num_ie = 0;
+ memset(ie_table->table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+
+ ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_TABLE,
+ ie_table, sizeof(*ie_table));
+ if (ret < 0) {
+ wl1271_warning("failed to set beacon filter table: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(ie_table);
+ return ret;
+}
+
+int wl1271_acx_sg_enable(struct wl1271 *wl)
+{
+ struct acx_bt_wlan_coex *pta;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx sg enable");
+
+ pta = kzalloc(sizeof(*pta), GFP_KERNEL);
+ if (!pta) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ pta->enable = SG_ENABLE;
+
+ ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta));
+ if (ret < 0) {
+ wl1271_warning("failed to set softgemini enable: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(pta);
+ return ret;
+}
+
+int wl1271_acx_sg_cfg(struct wl1271 *wl)
+{
+ struct acx_bt_wlan_coex_param *param;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx sg cfg");
+
+ param = kzalloc(sizeof(*param), GFP_KERNEL);
+ if (!param) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* BT-WLAN coext parameters */
+ param->min_rate = RATE_INDEX_24MBPS;
+ param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+ param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+ param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+ param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+ param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+ param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+ param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+ param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+ param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+ param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+ param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+ param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+ param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+ param->antenna_type = PTA_ANTENNA_TYPE_DEF;
+ param->signal_type = PTA_SIGNALING_TYPE_DEF;
+ param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+ param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+ param->max_cts = PTA_MAX_NUM_CTS_DEF;
+ param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+ param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+ param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+ param->wlan_elp_hp = PTA_ELP_HP_DEF;
+ param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+ param->ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+ param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+ param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+ param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+ ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
+ if (ret < 0) {
+ wl1271_warning("failed to set sg config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(param);
+ return ret;
+}
+
+int wl1271_acx_cca_threshold(struct wl1271 *wl)
+{
+ struct acx_energy_detection *detection;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx cca threshold");
+
+ detection = kzalloc(sizeof(*detection), GFP_KERNEL);
+ if (!detection) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ detection->rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+ detection->tx_energy_detection = 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD,
+ detection, sizeof(*detection));
+ if (ret < 0) {
+ wl1271_warning("failed to set cca threshold: %d", ret);
+ return ret;
+ }
+
+out:
+ kfree(detection);
+ return ret;
+}
+
+int wl1271_acx_bcn_dtim_options(struct wl1271 *wl)
+{
+ struct acx_beacon_broadcast *bb;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx bcn dtim options");
+
+ bb = kzalloc(sizeof(*bb), GFP_KERNEL);
+ if (!bb) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ bb->beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+ bb->broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+ bb->rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+ bb->ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+ ret = wl1271_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb));
+ if (ret < 0) {
+ wl1271_warning("failed to set rx config: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(bb);
+ return ret;
+}
+
+int wl1271_acx_aid(struct wl1271 *wl, u16 aid)
+{
+ struct acx_aid *acx_aid;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx aid");
+
+ acx_aid = kzalloc(sizeof(*acx_aid), GFP_KERNEL);
+ if (!acx_aid) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx_aid->aid = aid;
+
+ ret = wl1271_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid));
+ if (ret < 0) {
+ wl1271_warning("failed to set aid: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx_aid);
+ return ret;
+}
+
+int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask)
+{
+ struct acx_event_mask *mask;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx event mbox mask");
+
+ mask = kzalloc(sizeof(*mask), GFP_KERNEL);
+ if (!mask) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* high event mask is unused */
+ mask->high_event_mask = 0xffffffff;
+
+ mask->event_mask = event_mask;
+
+ ret = wl1271_cmd_configure(wl, ACX_EVENT_MBOX_MASK,
+ mask, sizeof(*mask));
+ if (ret < 0) {
+ wl1271_warning("failed to set acx_event_mbox_mask: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(mask);
+ return ret;
+}
+
+int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble)
+{
+ struct acx_preamble *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx_set_preamble");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->preamble = preamble;
+
+ ret = wl1271_cmd_configure(wl, ACX_PREAMBLE_TYPE, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of preamble failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_cts_protect(struct wl1271 *wl,
+ enum acx_ctsprotect_type ctsprotect)
+{
+ struct acx_ctsprotect *acx;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->ctsprotect = ctsprotect;
+
+ ret = wl1271_cmd_configure(wl, ACX_CTS_PROTECTION, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of ctsprotect failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats)
+{
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "acx statistics");
+
+ ret = wl1271_cmd_interrogate(wl, ACX_STATISTICS, stats,
+ sizeof(*stats));
+ if (ret < 0) {
+ wl1271_warning("acx statistics failed: %d", ret);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+int wl1271_acx_rate_policies(struct wl1271 *wl)
+{
+ struct acx_rate_policy *acx;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx rate policies");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* configure one default (one-size-fits-all) rate class */
+ acx->rate_class_cnt = 1;
+ acx->rate_class[0].enabled_rates = ACX_RATE_MASK_ALL;
+ acx->rate_class[0].short_retry_limit = ACX_RATE_RETRY_LIMIT;
+ acx->rate_class[0].long_retry_limit = ACX_RATE_RETRY_LIMIT;
+ acx->rate_class[0].aflags = 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of rate policies failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_ac_cfg(struct wl1271 *wl)
+{
+ struct acx_ac_cfg *acx;
+ int i, ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx access category config");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * FIXME: Configure each AC with appropriate values (most suitable
+ * values will probably be different for each AC.
+ */
+ for (i = 0; i < WL1271_ACX_AC_COUNT; i++) {
+ acx->ac = i;
+
+ /*
+ * FIXME: The following default values originate from
+ * the TI reference driver. What do they mean?
+ */
+ acx->cw_min = 15;
+ acx->cw_max = 63;
+ acx->aifsn = 3;
+ acx->reserved = 0;
+ acx->tx_op_limit = 0;
+
+ ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of access category "
+ "config: %d", ret);
+ goto out;
+ }
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_tid_cfg(struct wl1271 *wl)
+{
+ struct acx_tid_config *acx;
+ int i, ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx tid config");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* FIXME: configure each TID with a different AC reference */
+ for (i = 0; i < WL1271_ACX_TID_COUNT; i++) {
+ acx->queue_id = i;
+ acx->tsid = WL1271_ACX_AC_BE;
+ acx->ps_scheme = WL1271_ACX_PS_SCHEME_LEGACY;
+ acx->ack_policy = WL1271_ACX_ACK_POLICY_LEGACY;
+
+ ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of tid config failed: %d", ret);
+ goto out;
+ }
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_frag_threshold(struct wl1271 *wl)
+{
+ struct acx_frag_threshold *acx;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx frag threshold");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of frag threshold failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_tx_config_options(struct wl1271 *wl)
+{
+ struct acx_tx_config_options *acx;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_ACX, "acx tx config options");
+
+ acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+ if (!acx) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ acx->tx_compl_timeout = WL1271_ACX_TX_COMPL_TIMEOUT;
+ acx->tx_compl_threshold = WL1271_ACX_TX_COMPL_THRESHOLD;
+ ret = wl1271_cmd_configure(wl, ACX_TX_CONFIG_OPT, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_warning("Setting of tx options failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(acx);
+ return ret;
+}
+
+int wl1271_acx_mem_cfg(struct wl1271 *wl)
+{
+ struct wl1271_acx_config_memory *mem_conf;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
+
+ mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL);
+ if (!mem_conf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* memory config */
+ mem_conf->num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+ mem_conf->rx_mem_block_num = ACX_RX_MEM_BLOCKS;
+ mem_conf->tx_min_mem_block_num = ACX_TX_MIN_MEM_BLOCKS;
+ mem_conf->num_ssid_profiles = ACX_NUM_SSID_PROFILES;
+ mem_conf->total_tx_descriptors = ACX_TX_DESCRIPTORS;
+
+ ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
+ sizeof(*mem_conf));
+ if (ret < 0) {
+ wl1271_warning("wl1271 mem config failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(mem_conf);
+ return ret;
+}
+
+int wl1271_acx_init_mem_config(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_mem_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ wl->target_mem_map = kzalloc(sizeof(struct wl1271_acx_mem_map),
+ GFP_KERNEL);
+ if (!wl->target_mem_map) {
+ wl1271_error("couldn't allocate target memory map");
+ return -ENOMEM;
+ }
+
+ /* we now ask for the firmware built memory map */
+ ret = wl1271_acx_mem_map(wl, (void *)wl->target_mem_map,
+ sizeof(struct wl1271_acx_mem_map));
+ if (ret < 0) {
+ wl1271_error("couldn't retrieve firmware memory map");
+ kfree(wl->target_mem_map);
+ wl->target_mem_map = NULL;
+ return ret;
+ }
+
+ /* initialize TX block book keeping */
+ wl->tx_blocks_available = wl->target_mem_map->num_tx_mem_blocks;
+ wl1271_debug(DEBUG_TX, "available tx blocks: %d",
+ wl->tx_blocks_available);
+
+ return 0;
+}
+
+int wl1271_acx_init_rx_interrupt(struct wl1271 *wl)
+{
+ struct wl1271_acx_rx_config_opt *rx_conf;
+ int ret;
+
+ wl1271_debug(DEBUG_ACX, "wl1271 rx interrupt config");
+
+ rx_conf = kzalloc(sizeof(*rx_conf), GFP_KERNEL);
+ if (!rx_conf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ rx_conf->threshold = WL1271_RX_INTR_THRESHOLD_DEF;
+ rx_conf->timeout = WL1271_RX_INTR_TIMEOUT_DEF;
+ rx_conf->mblk_threshold = USHORT_MAX; /* Disabled */
+ rx_conf->queue_type = RX_QUEUE_TYPE_RX_LOW_PRIORITY;
+
+ ret = wl1271_cmd_configure(wl, ACX_RX_CONFIG_OPT, rx_conf,
+ sizeof(*rx_conf));
+ if (ret < 0) {
+ wl1271_warning("wl1271 rx config opt failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(rx_conf);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
new file mode 100644
index 0000000..9068daa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -0,0 +1,1221 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_ACX_H__
+#define __WL1271_ACX_H__
+
+#include "wl1271.h"
+#include "wl1271_cmd.h"
+
+/*************************************************************************
+
+ Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+/* HW Initiated interrupt Watchdog timer expiration */
+#define WL1271_ACX_INTR_WATCHDOG BIT(0)
+/* Init sequence is done (masked interrupt, detection through polling only ) */
+#define WL1271_ACX_INTR_INIT_COMPLETE BIT(1)
+/* Event was entered to Event MBOX #A*/
+#define WL1271_ACX_INTR_EVENT_A BIT(2)
+/* Event was entered to Event MBOX #B*/
+#define WL1271_ACX_INTR_EVENT_B BIT(3)
+/* Command processing completion*/
+#define WL1271_ACX_INTR_CMD_COMPLETE BIT(4)
+/* Signaling the host on HW wakeup */
+#define WL1271_ACX_INTR_HW_AVAILABLE BIT(5)
+/* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */
+#define WL1271_ACX_INTR_DATA BIT(6)
+/* Trace meassge on MBOX #A */
+#define WL1271_ACX_INTR_TRACE_A BIT(7)
+/* Trace meassge on MBOX #B */
+#define WL1271_ACX_INTR_TRACE_B BIT(8)
+
+#define WL1271_ACX_INTR_ALL 0xFFFFFFFF
+#define WL1271_ACX_ALL_EVENTS_VECTOR (WL1271_ACX_INTR_WATCHDOG | \
+ WL1271_ACX_INTR_INIT_COMPLETE | \
+ WL1271_ACX_INTR_EVENT_A | \
+ WL1271_ACX_INTR_EVENT_B | \
+ WL1271_ACX_INTR_CMD_COMPLETE | \
+ WL1271_ACX_INTR_HW_AVAILABLE | \
+ WL1271_ACX_INTR_DATA)
+
+#define WL1271_INTR_MASK (WL1271_ACX_INTR_EVENT_A | \
+ WL1271_ACX_INTR_EVENT_B | \
+ WL1271_ACX_INTR_DATA)
+
+/* Target's information element */
+struct acx_header {
+ struct wl1271_cmd_header cmd;
+
+ /* acx (or information element) header */
+ u16 id;
+
+ /* payload length (not including headers */
+ u16 len;
+};
+
+struct acx_error_counter {
+ struct acx_header header;
+
+ /* The number of PLCP errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 PLCP_error;
+
+ /* The number of FCS errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 FCS_error;
+
+ /* The number of MPDUs without PLCP header errors received*/
+ /* since the last time this information element was interrogated. */
+ /* This field is automatically cleared when it is interrogated.*/
+ u32 valid_frame;
+
+ /* the number of missed sequence numbers in the squentially */
+ /* values of frames seq numbers */
+ u32 seq_num_miss;
+} __attribute__ ((packed));
+
+struct acx_revision {
+ struct acx_header header;
+
+ /*
+ * The WiLink firmware version, an ASCII string x.x.x.x,
+ * that uniquely identifies the current firmware.
+ * The left most digit is incremented each time a
+ * significant change is made to the firmware, such as
+ * code redesign or new platform support.
+ * The second digit is incremented when major enhancements
+ * are added or major fixes are made.
+ * The third digit is incremented for each GA release.
+ * The fourth digit is incremented for each build.
+ * The first two digits identify a firmware release version,
+ * in other words, a unique set of features.
+ * The first three digits identify a GA release.
+ */
+ char fw_version[20];
+
+ /*
+ * This 4 byte field specifies the WiLink hardware version.
+ * bits 0 - 15: Reserved.
+ * bits 16 - 23: Version ID - The WiLink version ID
+ * (1 = first spin, 2 = second spin, and so on).
+ * bits 24 - 31: Chip ID - The WiLink chip ID.
+ */
+ u32 hw_version;
+} __attribute__ ((packed));
+
+enum wl1271_psm_mode {
+ /* Active mode */
+ WL1271_PSM_CAM = 0,
+
+ /* Power save mode */
+ WL1271_PSM_PS = 1,
+
+ /* Extreme low power */
+ WL1271_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+ struct acx_header header;
+
+ /* The sleep level authorization of the device. */
+ /* 0 - Always active*/
+ /* 1 - Power down mode: light / fast sleep*/
+ /* 2 - ELP mode: Deep / Max sleep*/
+ u8 sleep_auth;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum {
+ HOSTIF_PCI_MASTER_HOST_INDIRECT,
+ HOSTIF_PCI_MASTER_HOST_DIRECT,
+ HOSTIF_SLAVE,
+ HOSTIF_PKT_RING,
+ HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY 0
+#define DEFAULT_RX_Q_PRIORITY 0
+#define DEFAULT_NUM_STATIONS 1
+#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */
+#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE 256
+
+#define DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_RX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_COMPLETE_TIME_OUT 20
+#define FW_TX_CMPLT_BLOCK_SIZE 16
+
+#define TX_MSDU_LIFETIME_MIN 0
+#define TX_MSDU_LIFETIME_MAX 3000
+#define TX_MSDU_LIFETIME_DEF 512
+#define RX_MSDU_LIFETIME_MIN 0
+#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF 512000
+
+struct acx_rx_msdu_lifetime {
+ struct acx_header header;
+
+ /*
+ * The maximum amount of time, in TU, before the
+ * firmware discards the MSDU.
+ */
+ u32 lifetime;
+} __attribute__ ((packed));
+
+/*
+ * RX Config Options Table
+ * Bit Definition
+ * === ==========
+ * 31:14 Reserved
+ * 13 Copy RX Status - when set, write three receive status words
+ * to top of rx'd MPDUs.
+ * When cleared, do not write three status words (added rev 1.5)
+ * 12 Reserved
+ * 11 RX Complete upon FCS error - when set, give rx complete
+ * interrupt for FCS errors, after the rx filtering, e.g. unicast
+ * frames not to us with FCS error will not generate an interrupt.
+ * 10 SSID Filter Enable - When set, the WiLink discards all beacon,
+ * probe request, and probe response frames with an SSID that does
+ * not match the SSID specified by the host in the START/JOIN
+ * command.
+ * When clear, the WiLink receives frames with any SSID.
+ * 9 Broadcast Filter Enable - When set, the WiLink discards all
+ * broadcast frames. When clear, the WiLink receives all received
+ * broadcast frames.
+ * 8:6 Reserved
+ * 5 BSSID Filter Enable - When set, the WiLink discards any frames
+ * with a BSSID that does not match the BSSID specified by the
+ * host.
+ * When clear, the WiLink receives frames from any BSSID.
+ * 4 MAC Addr Filter - When set, the WiLink discards any frames
+ * with a destination address that does not match the MAC address
+ * of the adaptor.
+ * When clear, the WiLink receives frames destined to any MAC
+ * address.
+ * 3 Promiscuous - When set, the WiLink receives all valid frames
+ * (i.e., all frames that pass the FCS check).
+ * When clear, only frames that pass the other filters specified
+ * are received.
+ * 2 FCS - When set, the WiLink includes the FCS with the received
+ * frame.
+ * When cleared, the FCS is discarded.
+ * 1 PLCP header - When set, write all data from baseband to frame
+ * buffer including PHY header.
+ * 0 Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit Definition
+ * === ==========
+ * 31:12 Reserved - Always equal to 0.
+ * 11 Association - When set, the WiLink receives all association
+ * related frames (association request/response, reassocation
+ * request/response, and disassociation). When clear, these frames
+ * are discarded.
+ * 10 Auth/De auth - When set, the WiLink receives all authentication
+ * and de-authentication frames. When clear, these frames are
+ * discarded.
+ * 9 Beacon - When set, the WiLink receives all beacon frames.
+ * When clear, these frames are discarded.
+ * 8 Contention Free - When set, the WiLink receives all contention
+ * free frames.
+ * When clear, these frames are discarded.
+ * 7 Control - When set, the WiLink receives all control frames.
+ * When clear, these frames are discarded.
+ * 6 Data - When set, the WiLink receives all data frames.
+ * When clear, these frames are discarded.
+ * 5 FCS Error - When set, the WiLink receives frames that have FCS
+ * errors.
+ * When clear, these frames are discarded.
+ * 4 Management - When set, the WiLink receives all management
+ * frames.
+ * When clear, these frames are discarded.
+ * 3 Probe Request - When set, the WiLink receives all probe request
+ * frames.
+ * When clear, these frames are discarded.
+ * 2 Probe Response - When set, the WiLink receives all probe
+ * response frames.
+ * When clear, these frames are discarded.
+ * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * frames.
+ * When clear, these frames are discarded.
+ * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * that have reserved frame types and sub types as defined by the
+ * 802.11 specification.
+ * When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+ struct acx_header header;
+
+ u32 config_options;
+ u32 filter_options;
+} __attribute__ ((packed));
+
+struct acx_packet_detection {
+ struct acx_header header;
+
+ u32 threshold;
+} __attribute__ ((packed));
+
+
+enum acx_slot_type {
+ SLOT_TIME_LONG = 0,
+ SLOT_TIME_SHORT = 1,
+ DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+ MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+ struct acx_header header;
+
+ u8 wone_index; /* Reserved */
+ u8 slot_time;
+ u8 reserved[6];
+} __attribute__ ((packed));
+
+
+#define ADDRESS_GROUP_MAX (8)
+#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct acx_dot11_grp_addr_tbl {
+ struct acx_header header;
+
+ u8 enabled;
+ u8 num_groups;
+ u8 pad[2];
+ u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __attribute__ ((packed));
+
+
+#define RX_TIMEOUT_PS_POLL_MIN 0
+#define RX_TIMEOUT_PS_POLL_MAX (200000)
+#define RX_TIMEOUT_PS_POLL_DEF (15)
+#define RX_TIMEOUT_UPSD_MIN 0
+#define RX_TIMEOUT_UPSD_MAX (200000)
+#define RX_TIMEOUT_UPSD_DEF (15)
+
+struct acx_rx_timeout {
+ struct acx_header header;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a PS-poll has been
+ * transmitted.
+ */
+ u16 ps_poll_timeout;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a frame has been sent
+ * from an UPSD enabled queue.
+ */
+ u16 upsd_timeout;
+} __attribute__ ((packed));
+
+#define RTS_THRESHOLD_MIN 0
+#define RTS_THRESHOLD_MAX 4096
+#define RTS_THRESHOLD_DEF 2347
+
+struct acx_rts_threshold {
+ struct acx_header header;
+
+ u16 threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_beacon_filter_option {
+ struct acx_header header;
+
+ u8 enable;
+
+ /*
+ * The number of beacons without the unicast TIM
+ * bit set that the firmware buffers before
+ * signaling the host about ready frames.
+ * When set to 0 and the filter is enabled, beacons
+ * without the unicast TIM bit set are dropped.
+ */
+ u8 max_num_beacons;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ * 2 3 OUI
+ * 5 1 Type
+ * 6 2 Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define BEACON_FILTER_TABLE_MAX_IE_NUM (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+ BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+ (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+ BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+struct acx_beacon_filter_ie_table {
+ struct acx_header header;
+
+ u8 num_ie;
+ u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+ u8 pad[3];
+} __attribute__ ((packed));
+
+enum {
+ SG_ENABLE = 0,
+ SG_DISABLE,
+ SG_SENSE_NO_ACTIVITY,
+ SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+ struct acx_header header;
+
+ /*
+ * 0 -> PTA enabled
+ * 1 -> PTA disabled
+ * 2 -> sense no active mode, i.e.
+ * an interrupt is sent upon
+ * BT activity.
+ * 3 -> PTA is switched on in response
+ * to the interrupt sending.
+ */
+ u8 enable;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+#define PTA_ANTENNA_TYPE_DEF (0)
+#define PTA_BT_HP_MAXTIME_DEF (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF (1)
+#define PTA_AFH_LEVERAGE_ON_DEF (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF (0)
+#define PTA_MAX_NUM_CTS_DEF (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000)
+#define PTA_CYCLE_TIME_FAST_DEF (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF (5)
+#define PTA_ELP_HP_DEF (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4)
+#define PTA_ALLOW_PA_SD_DEF (1)
+#define PTA_TIME_BEFORE_BEACON_DEF (6300)
+#define PTA_HPDM_MAX_TIME_DEF (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF (0)
+#define PTA_BT_HP_RESPECTED_DEF (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF (24)
+#define PTA_ACK_MODE_DEF (1)
+
+struct acx_bt_wlan_coex_param {
+ struct acx_header header;
+
+ /*
+ * The minimum rate of a received WLAN packet in the STA,
+ * during protective mode, of which a new BT-HP request
+ * during this Rx will always be respected and gain the antenna.
+ */
+ u32 min_rate;
+
+ /* Max time the BT HP will be respected. */
+ u16 bt_hp_max_time;
+
+ /* Max time the WLAN HP will be respected. */
+ u16 wlan_hp_max_time;
+
+ /*
+ * The time between the last BT activity
+ * and the moment when the sense mode returns
+ * to SENSE_INACTIVE.
+ */
+ u16 sense_disable_timer;
+
+ /* Time before the next BT HP instance */
+ u16 rx_time_bt_hp;
+ u16 tx_time_bt_hp;
+
+ /* range: 10-20000 default: 1500 */
+ u16 rx_time_bt_hp_fast;
+ u16 tx_time_bt_hp_fast;
+
+ /* range: 2000-65535 default: 8700 */
+ u16 wlan_cycle_fast;
+
+ /* range: 0 - 15000 (Msec) default: 1000 */
+ u16 bt_anti_starvation_period;
+
+ /* range 400-10000(Usec) default: 3000 */
+ u16 next_bt_lp_packet;
+
+ /* Deafult: worst case for BT DH5 traffic */
+ u16 wake_up_beacon;
+
+ /* range: 0-50000(Usec) default: 1050 */
+ u16 hp_dm_max_guard_time;
+
+ /*
+ * This is to prevent both BT & WLAN antenna
+ * starvation.
+ * Range: 100-50000(Usec) default:2550
+ */
+ u16 next_wlan_packet;
+
+ /* 0 -> shared antenna */
+ u8 antenna_type;
+
+ /*
+ * 0 -> TI legacy
+ * 1 -> Palau
+ */
+ u8 signal_type;
+
+ /*
+ * BT AFH status
+ * 0 -> no AFH
+ * 1 -> from dedicated GPIO
+ * 2 -> AFH on (from host)
+ */
+ u8 afh_leverage_on;
+
+ /*
+ * The number of cycles during which no
+ * TX will be sent after 1 cycle of RX
+ * transaction in protective mode
+ */
+ u8 quiet_cycle_num;
+
+ /*
+ * The maximum number of CTSs that will
+ * be sent for receiving RX packet in
+ * protective mode
+ */
+ u8 max_cts;
+
+ /*
+ * The number of WLAN packets
+ * transferred in common mode before
+ * switching to BT.
+ */
+ u8 wlan_packets_num;
+
+ /*
+ * The number of BT packets
+ * transferred in common mode before
+ * switching to WLAN.
+ */
+ u8 bt_packets_num;
+
+ /* range: 1-255 default: 5 */
+ u8 missed_rx_avalanche;
+
+ /* range: 0-1 default: 1 */
+ u8 wlan_elp_hp;
+
+ /* range: 0 - 15 default: 4 */
+ u8 bt_anti_starvation_cycles;
+
+ u8 ack_mode_dual_ant;
+
+ /*
+ * Allow PA_SD assertion/de-assertion
+ * during enabled BT activity.
+ */
+ u8 pa_sd_enable;
+
+ /*
+ * Enable/Disable PTA in auto mode:
+ * Support Both Active & P.S modes
+ */
+ u8 pta_auto_mode_enable;
+
+ /* range: 0 - 20 default: 1 */
+ u8 bt_hp_respected_num;
+} __attribute__ ((packed));
+
+#define CCA_THRSH_ENABLE_ENERGY_D 0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D 0xFFEF
+
+struct acx_energy_detection {
+ struct acx_header header;
+
+ /* The RX Clear Channel Assessment threshold in the PHY */
+ u16 rx_cca_threshold;
+ u8 tx_energy_detection;
+ u8 pad;
+} __attribute__ ((packed));
+
+#define BCN_RX_TIMEOUT_DEF_VALUE 10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE 20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE 1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+ struct acx_header header;
+
+ u16 beacon_rx_timeout;
+ u16 broadcast_timeout;
+
+ /* Enables receiving of broadcast packets in PS mode */
+ u8 rx_broadcast_in_ps;
+
+ /* Consecutive PS Poll failures before updating the host */
+ u8 ps_poll_threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_event_mask {
+ struct acx_header header;
+
+ u32 event_mask;
+ u32 high_event_mask; /* Unused */
+} __attribute__ ((packed));
+
+#define CFG_RX_FCS BIT(2)
+#define CFG_RX_ALL_GOOD BIT(3)
+#define CFG_UNI_FILTER_EN BIT(4)
+#define CFG_BSSID_FILTER_EN BIT(5)
+#define CFG_MC_FILTER_EN BIT(6)
+#define CFG_MC_ADDR0_EN BIT(7)
+#define CFG_MC_ADDR1_EN BIT(8)
+#define CFG_BC_REJECT_EN BIT(9)
+#define CFG_SSID_FILTER_EN BIT(10)
+#define CFG_RX_INT_FCS_ERROR BIT(11)
+#define CFG_RX_INT_ENCRYPTED BIT(12)
+#define CFG_RX_WR_RX_STATUS BIT(13)
+#define CFG_RX_FILTER_NULTI BIT(14)
+#define CFG_RX_RESERVE BIT(15)
+#define CFG_RX_TIMESTAMP_TSF BIT(16)
+
+#define CFG_RX_RSV_EN BIT(0)
+#define CFG_RX_RCTS_ACK BIT(1)
+#define CFG_RX_PRSP_EN BIT(2)
+#define CFG_RX_PREQ_EN BIT(3)
+#define CFG_RX_MGMT_EN BIT(4)
+#define CFG_RX_FCS_ERROR BIT(5)
+#define CFG_RX_DATA_EN BIT(6)
+#define CFG_RX_CTL_EN BIT(7)
+#define CFG_RX_CF_EN BIT(8)
+#define CFG_RX_BCN_EN BIT(9)
+#define CFG_RX_AUTH_EN BIT(10)
+#define CFG_RX_ASSOC_EN BIT(11)
+
+#define SCAN_PASSIVE BIT(0)
+#define SCAN_5GHZ_BAND BIT(1)
+#define SCAN_TRIGGERED BIT(2)
+#define SCAN_PRIORITY_HIGH BIT(3)
+
+struct acx_feature_config {
+ struct acx_header header;
+
+ u32 options;
+ u32 data_flow_options;
+} __attribute__ ((packed));
+
+struct acx_current_tx_power {
+ struct acx_header header;
+
+ u8 current_tx_power;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_wake_up_event {
+ WAKE_UP_EVENT_BEACON_BITMAP = 0x01, /* Wake on every Beacon*/
+ WAKE_UP_EVENT_DTIM_BITMAP = 0x02, /* Wake on every DTIM*/
+ WAKE_UP_EVENT_N_DTIM_BITMAP = 0x04, /* Wake on every Nth DTIM */
+ WAKE_UP_EVENT_N_BEACONS_BITMAP = 0x08, /* Wake on every Nth Beacon */
+ WAKE_UP_EVENT_BITS_MASK = 0x0F
+};
+
+struct acx_wake_up_condition {
+ struct acx_header header;
+
+ u8 wake_up_event; /* Only one bit can be set */
+ u8 listen_interval;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_aid {
+ struct acx_header header;
+
+ /*
+ * To be set when associated with an AP.
+ */
+ u16 aid;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_preamble_type {
+ ACX_PREAMBLE_LONG = 0,
+ ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+ struct acx_header header;
+
+ /*
+ * When set, the WiLink transmits the frames with a short preamble and
+ * when cleared, the WiLink transmits the frames with a long preamble.
+ */
+ u8 preamble;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_ctsprotect_type {
+ CTSPROTECT_DISABLE = 0,
+ CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+ struct acx_header header;
+ u8 ctsprotect;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_tx_statistics {
+ u32 internal_desc_overflow;
+} __attribute__ ((packed));
+
+struct acx_rx_statistics {
+ u32 out_of_mem;
+ u32 hdr_overflow;
+ u32 hw_stuck;
+ u32 dropped;
+ u32 fcs_err;
+ u32 xfr_hint_trig;
+ u32 path_reset;
+ u32 reset_counter;
+} __attribute__ ((packed));
+
+struct acx_dma_statistics {
+ u32 rx_requested;
+ u32 rx_errors;
+ u32 tx_requested;
+ u32 tx_errors;
+} __attribute__ ((packed));
+
+struct acx_isr_statistics {
+ /* host command complete */
+ u32 cmd_cmplt;
+
+ /* fiqisr() */
+ u32 fiqs;
+
+ /* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+ u32 rx_headers;
+
+ /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+ u32 rx_completes;
+
+ /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+ u32 rx_mem_overflow;
+
+ /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+ u32 rx_rdys;
+
+ /* irqisr() */
+ u32 irqs;
+
+ /* (INT_STS_ND & INT_TRIG_TX_PROC) */
+ u32 tx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+ u32 decrypt_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA0) */
+ u32 dma0_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA1) */
+ u32 dma1_done;
+
+ /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+ u32 tx_exch_complete;
+
+ /* (INT_STS_ND & INT_TRIG_COMMAND) */
+ u32 commands;
+
+ /* (INT_STS_ND & INT_TRIG_RX_PROC) */
+ u32 rx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_PM_802) */
+ u32 hw_pm_mode_changes;
+
+ /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+ u32 host_acknowledges;
+
+ /* (INT_STS_ND & INT_TRIG_PM_PCI) */
+ u32 pci_pm;
+
+ /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+ u32 wakeups;
+
+ /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+ u32 low_rssi;
+} __attribute__ ((packed));
+
+struct acx_wep_statistics {
+ /* WEP address keys configured */
+ u32 addr_key_count;
+
+ /* default keys configured */
+ u32 default_key_count;
+
+ u32 reserved;
+
+ /* number of times that WEP key not found on lookup */
+ u32 key_not_found;
+
+ /* number of times that WEP key decryption failed */
+ u32 decrypt_fail;
+
+ /* WEP packets decrypted */
+ u32 packets;
+
+ /* WEP decrypt interrupts */
+ u32 interrupt;
+} __attribute__ ((packed));
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+ /* the amount of enters into power save mode (both PD & ELP) */
+ u32 ps_enter;
+
+ /* the amount of enters into ELP mode */
+ u32 elp_enter;
+
+ /* the amount of missing beacon interrupts to the host */
+ u32 missing_bcns;
+
+ /* the amount of wake on host-access times */
+ u32 wake_on_host;
+
+ /* the amount of wake on timer-expire */
+ u32 wake_on_timer_exp;
+
+ /* the number of packets that were transmitted with PS bit set */
+ u32 tx_with_ps;
+
+ /* the number of packets that were transmitted with PS bit clear */
+ u32 tx_without_ps;
+
+ /* the number of received beacons */
+ u32 rcvd_beacons;
+
+ /* the number of entering into PowerOn (power save off) */
+ u32 power_save_off;
+
+ /* the number of entries into power save mode */
+ u16 enable_ps;
+
+ /*
+ * the number of exits from power save, not including failed PS
+ * transitions
+ */
+ u16 disable_ps;
+
+ /*
+ * the number of times the TSF counter was adjusted because
+ * of drift
+ */
+ u32 fix_tsf_ps;
+
+ /* Gives statistics about the spread continuous missed beacons.
+ * The 16 LSB are dedicated for the PS mode.
+ * The 16 MSB are dedicated for the PS mode.
+ * cont_miss_bcns_spread[0] - single missed beacon.
+ * cont_miss_bcns_spread[1] - two continuous missed beacons.
+ * cont_miss_bcns_spread[2] - three continuous missed beacons.
+ * ...
+ * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+ */
+ u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+ /* the number of beacons in awake mode */
+ u32 rcvd_awake_beacons;
+} __attribute__ ((packed));
+
+struct acx_mic_statistics {
+ u32 rx_pkts;
+ u32 calc_failure;
+} __attribute__ ((packed));
+
+struct acx_aes_statistics {
+ u32 encrypt_fail;
+ u32 decrypt_fail;
+ u32 encrypt_packets;
+ u32 decrypt_packets;
+ u32 encrypt_interrupt;
+ u32 decrypt_interrupt;
+} __attribute__ ((packed));
+
+struct acx_event_statistics {
+ u32 heart_beat;
+ u32 calibration;
+ u32 rx_mismatch;
+ u32 rx_mem_empty;
+ u32 rx_pool;
+ u32 oom_late;
+ u32 phy_transmit_error;
+ u32 tx_stuck;
+} __attribute__ ((packed));
+
+struct acx_ps_statistics {
+ u32 pspoll_timeouts;
+ u32 upsd_timeouts;
+ u32 upsd_max_sptime;
+ u32 upsd_max_apturn;
+ u32 pspoll_max_apturn;
+ u32 pspoll_utilization;
+ u32 upsd_utilization;
+} __attribute__ ((packed));
+
+struct acx_rxpipe_statistics {
+ u32 rx_prep_beacon_drop;
+ u32 descr_host_int_trig_rx_data;
+ u32 beacon_buffer_thres_host_int_trig_rx_data;
+ u32 missed_beacon_host_int_trig_rx_data;
+ u32 tx_xfr_host_int_trig_rx_data;
+} __attribute__ ((packed));
+
+struct acx_statistics {
+ struct acx_header header;
+
+ struct acx_tx_statistics tx;
+ struct acx_rx_statistics rx;
+ struct acx_dma_statistics dma;
+ struct acx_isr_statistics isr;
+ struct acx_wep_statistics wep;
+ struct acx_pwr_statistics pwr;
+ struct acx_aes_statistics aes;
+ struct acx_mic_statistics mic;
+ struct acx_event_statistics event;
+ struct acx_ps_statistics ps;
+ struct acx_rxpipe_statistics rxpipe;
+} __attribute__ ((packed));
+
+#define ACX_MAX_RATE_CLASSES 8
+#define ACX_RATE_MASK_UNSPECIFIED 0
+#define ACX_RATE_MASK_ALL 0x1eff
+#define ACX_RATE_RETRY_LIMIT 10
+
+struct acx_rate_class {
+ u32 enabled_rates;
+ u8 short_retry_limit;
+ u8 long_retry_limit;
+ u8 aflags;
+ u8 reserved;
+};
+
+struct acx_rate_policy {
+ struct acx_header header;
+
+ u32 rate_class_cnt;
+ struct acx_rate_class rate_class[ACX_MAX_RATE_CLASSES];
+} __attribute__ ((packed));
+
+#define WL1271_ACX_AC_COUNT 4
+
+struct acx_ac_cfg {
+ struct acx_header header;
+ u8 ac;
+ u8 cw_min;
+ u16 cw_max;
+ u8 aifsn;
+ u8 reserved;
+ u16 tx_op_limit;
+} __attribute__ ((packed));
+
+enum wl1271_acx_ac {
+ WL1271_ACX_AC_BE = 0,
+ WL1271_ACX_AC_BK = 1,
+ WL1271_ACX_AC_VI = 2,
+ WL1271_ACX_AC_VO = 3,
+ WL1271_ACX_AC_CTS2SELF = 4,
+ WL1271_ACX_AC_ANY_TID = 0x1F,
+ WL1271_ACX_AC_INVALID = 0xFF,
+};
+
+enum wl1271_acx_ps_scheme {
+ WL1271_ACX_PS_SCHEME_LEGACY = 0,
+ WL1271_ACX_PS_SCHEME_UPSD_TRIGGER = 1,
+ WL1271_ACX_PS_SCHEME_LEGACY_PSPOLL = 2,
+ WL1271_ACX_PS_SCHEME_SAPSD = 3,
+};
+
+enum wl1271_acx_ack_policy {
+ WL1271_ACX_ACK_POLICY_LEGACY = 0,
+ WL1271_ACX_ACK_POLICY_NO_ACK = 1,
+ WL1271_ACX_ACK_POLICY_BLOCK = 2,
+};
+
+#define WL1271_ACX_TID_COUNT 7
+
+struct acx_tid_config {
+ struct acx_header header;
+ u8 queue_id;
+ u8 channel_type;
+ u8 tsid;
+ u8 ps_scheme;
+ u8 ack_policy;
+ u8 padding[3];
+ u32 apsd_conf[2];
+} __attribute__ ((packed));
+
+struct acx_frag_threshold {
+ struct acx_header header;
+ u16 frag_threshold;
+ u8 padding[2];
+} __attribute__ ((packed));
+
+#define WL1271_ACX_TX_COMPL_TIMEOUT 5
+#define WL1271_ACX_TX_COMPL_THRESHOLD 5
+
+struct acx_tx_config_options {
+ struct acx_header header;
+ u16 tx_compl_timeout; /* msec */
+ u16 tx_compl_threshold; /* number of packets */
+} __attribute__ ((packed));
+
+#define ACX_RX_MEM_BLOCKS 64
+#define ACX_TX_MIN_MEM_BLOCKS 64
+#define ACX_TX_DESCRIPTORS 32
+#define ACX_NUM_SSID_PROFILES 1
+
+struct wl1271_acx_config_memory {
+ struct acx_header header;
+
+ u8 rx_mem_block_num;
+ u8 tx_min_mem_block_num;
+ u8 num_stations;
+ u8 num_ssid_profiles;
+ u32 total_tx_descriptors;
+} __attribute__ ((packed));
+
+struct wl1271_acx_mem_map {
+ struct acx_header header;
+
+ void *code_start;
+ void *code_end;
+
+ void *wep_defkey_start;
+ void *wep_defkey_end;
+
+ void *sta_table_start;
+ void *sta_table_end;
+
+ void *packet_template_start;
+ void *packet_template_end;
+
+ /* Address of the TX result interface (control block) */
+ u32 tx_result;
+ u32 tx_result_queue_start;
+
+ void *queue_memory_start;
+ void *queue_memory_end;
+
+ u32 packet_memory_pool_start;
+ u32 packet_memory_pool_end;
+
+ void *debug_buffer1_start;
+ void *debug_buffer1_end;
+
+ void *debug_buffer2_start;
+ void *debug_buffer2_end;
+
+ /* Number of blocks FW allocated for TX packets */
+ u32 num_tx_mem_blocks;
+
+ /* Number of blocks FW allocated for RX packets */
+ u32 num_rx_mem_blocks;
+
+ /* the following 4 fields are valid in SLAVE mode only */
+ u8 *tx_cbuf;
+ u8 *rx_cbuf;
+ void *rx_ctrl;
+ void *tx_ctrl;
+} __attribute__ ((packed));
+
+enum wl1271_acx_rx_queue_type {
+ RX_QUEUE_TYPE_RX_LOW_PRIORITY, /* All except the high priority */
+ RX_QUEUE_TYPE_RX_HIGH_PRIORITY, /* Management and voice packets */
+ RX_QUEUE_TYPE_NUM,
+ RX_QUEUE_TYPE_MAX = USHORT_MAX
+};
+
+#define WL1271_RX_INTR_THRESHOLD_DEF 0 /* no pacing, send interrupt on
+ * every event */
+#define WL1271_RX_INTR_THRESHOLD_MIN 0
+#define WL1271_RX_INTR_THRESHOLD_MAX 15
+
+#define WL1271_RX_INTR_TIMEOUT_DEF 5
+#define WL1271_RX_INTR_TIMEOUT_MIN 1
+#define WL1271_RX_INTR_TIMEOUT_MAX 100
+
+struct wl1271_acx_rx_config_opt {
+ struct acx_header header;
+
+ u16 mblk_threshold;
+ u16 threshold;
+ u16 timeout;
+ u8 queue_type;
+ u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+ ACX_WAKE_UP_CONDITIONS = 0x0002,
+ ACX_MEM_CFG = 0x0003,
+ ACX_SLOT = 0x0004,
+ ACX_AC_CFG = 0x0007,
+ ACX_MEM_MAP = 0x0008,
+ ACX_AID = 0x000A,
+ /* ACX_FW_REV is missing in the ref driver, but seems to work */
+ ACX_FW_REV = 0x000D,
+ ACX_MEDIUM_USAGE = 0x000F,
+ ACX_RX_CFG = 0x0010,
+ ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */
+ ACX_STATISTICS = 0x0013, /* Debug API */
+ ACX_PWR_CONSUMPTION_STATISTICS = 0x0014,
+ ACX_FEATURE_CFG = 0x0015,
+ ACX_TID_CFG = 0x001A,
+ ACX_PS_RX_STREAMING = 0x001B,
+ ACX_BEACON_FILTER_OPT = 0x001F,
+ ACX_NOISE_HIST = 0x0021,
+ ACX_HDK_VERSION = 0x0022, /* ??? */
+ ACX_PD_THRESHOLD = 0x0023,
+ ACX_TX_CONFIG_OPT = 0x0024,
+ ACX_CCA_THRESHOLD = 0x0025,
+ ACX_EVENT_MBOX_MASK = 0x0026,
+ ACX_CONN_MONIT_PARAMS = 0x002D,
+ ACX_CONS_TX_FAILURE = 0x002F,
+ ACX_BCN_DTIM_OPTIONS = 0x0031,
+ ACX_SG_ENABLE = 0x0032,
+ ACX_SG_CFG = 0x0033,
+ ACX_BEACON_FILTER_TABLE = 0x0038,
+ ACX_ARP_IP_FILTER = 0x0039,
+ ACX_ROAMING_STATISTICS_TBL = 0x003B,
+ ACX_RATE_POLICY = 0x003D,
+ ACX_CTS_PROTECTION = 0x003E,
+ ACX_SLEEP_AUTH = 0x003F,
+ ACX_PREAMBLE_TYPE = 0x0040,
+ ACX_ERROR_CNT = 0x0041,
+ ACX_IBSS_FILTER = 0x0044,
+ ACX_SERVICE_PERIOD_TIMEOUT = 0x0045,
+ ACX_TSF_INFO = 0x0046,
+ ACX_CONFIG_PS_WMM = 0x0049,
+ ACX_ENABLE_RX_DATA_FILTER = 0x004A,
+ ACX_SET_RX_DATA_FILTER = 0x004B,
+ ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+ ACX_RX_CONFIG_OPT = 0x004E,
+ ACX_FRAG_CFG = 0x004F,
+ ACX_BET_ENABLE = 0x0050,
+ ACX_RSSI_SNR_TRIGGER = 0x0051,
+ ACX_RSSI_SNR_WEIGHTS = 0x0051,
+ ACX_KEEP_ALIVE_MODE = 0x0052,
+ ACX_SET_KEEP_ALIVE_CONFIG = 0x0054,
+ ACX_BA_SESSION_RESPONDER_POLICY = 0x0055,
+ ACX_BA_SESSION_INITIATOR_POLICY = 0x0056,
+ ACX_PEER_HT_CAP = 0x0057,
+ ACX_HT_BSS_OPERATION = 0x0058,
+ ACX_COEX_ACTIVITY = 0x0059,
+ DOT11_RX_MSDU_LIFE_TIME = 0x1004,
+ DOT11_CUR_TX_PWR = 0x100D,
+ DOT11_RX_DOT11_MODE = 0x1012,
+ DOT11_RTS_THRESHOLD = 0x1013,
+ DOT11_GROUP_ADDRESS_TBL = 0x1014,
+
+ MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+ MAX_IE = 0xFFFF
+};
+
+
+int wl1271_acx_wake_up_conditions(struct wl1271 *wl, u8 wake_up_event,
+ u8 listen_interval);
+int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth);
+int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len);
+int wl1271_acx_tx_power(struct wl1271 *wl, int power);
+int wl1271_acx_feature_cfg(struct wl1271 *wl);
+int wl1271_acx_mem_map(struct wl1271 *wl,
+ struct acx_header *mem_map, size_t len);
+int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl, u32 life_time);
+int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter);
+int wl1271_acx_pd_threshold(struct wl1271 *wl);
+int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time);
+int wl1271_acx_group_address_tbl(struct wl1271 *wl);
+int wl1271_acx_service_period_timeout(struct wl1271 *wl);
+int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
+int wl1271_acx_beacon_filter_opt(struct wl1271 *wl);
+int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
+int wl1271_acx_sg_enable(struct wl1271 *wl);
+int wl1271_acx_sg_cfg(struct wl1271 *wl);
+int wl1271_acx_cca_threshold(struct wl1271 *wl);
+int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
+int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
+int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask);
+int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble);
+int wl1271_acx_cts_protect(struct wl1271 *wl,
+ enum acx_ctsprotect_type ctsprotect);
+int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
+int wl1271_acx_rate_policies(struct wl1271 *wl);
+int wl1271_acx_ac_cfg(struct wl1271 *wl);
+int wl1271_acx_tid_cfg(struct wl1271 *wl);
+int wl1271_acx_frag_threshold(struct wl1271 *wl);
+int wl1271_acx_tx_config_options(struct wl1271 *wl);
+int wl1271_acx_mem_cfg(struct wl1271 *wl);
+int wl1271_acx_init_mem_config(struct wl1271 *wl);
+int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
+
+#endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
new file mode 100644
index 0000000..8228ef4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -0,0 +1,541 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+
+#include "wl1271_acx.h"
+#include "wl1271_reg.h"
+#include "wl1271_boot.h"
+#include "wl1271_spi.h"
+#include "wl1271_event.h"
+
+static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
+ [PART_DOWN] = {
+ .mem = {
+ .start = 0x00000000,
+ .size = 0x000177c0
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = 0x00008800
+ },
+ },
+
+ [PART_WORK] = {
+ .mem = {
+ .start = 0x00040000,
+ .size = 0x00014fc0
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = 0x0000b000
+ },
+ },
+
+ [PART_DRPW] = {
+ .mem = {
+ .start = 0x00040000,
+ .size = 0x00014fc0
+ },
+ .reg = {
+ .start = DRPW_BASE,
+ .size = 0x00006000
+ }
+ }
+};
+
+static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
+{
+ u32 cpu_ctrl;
+
+ /* 10.5.0 run the firmware (I) */
+ cpu_ctrl = wl1271_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ /* 10.5.1 run the firmware (II) */
+ cpu_ctrl |= flag;
+ wl1271_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static void wl1271_boot_fw_version(struct wl1271 *wl)
+{
+ struct wl1271_static_data static_data;
+
+ wl1271_spi_mem_read(wl, wl->cmd_box_addr,
+ &static_data, sizeof(static_data));
+
+ strncpy(wl->chip.fw_ver, static_data.fw_version,
+ sizeof(wl->chip.fw_ver));
+
+ /* make sure the string is NULL-terminated */
+ wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0';
+}
+
+static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
+ size_t fw_data_len, u32 dest)
+{
+ int addr, chunk_num, partition_limit;
+ u8 *p;
+
+ /* whal_FwCtrl_LoadFwImageSm() */
+
+ wl1271_debug(DEBUG_BOOT, "starting firmware upload");
+
+ wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
+ fw_data_len, CHUNK_SIZE);
+
+
+ if ((fw_data_len % 4) != 0) {
+ wl1271_error("firmware length not multiple of four");
+ return -EIO;
+ }
+
+ wl1271_set_partition(wl, dest,
+ part_table[PART_DOWN].mem.size,
+ part_table[PART_DOWN].reg.start,
+ part_table[PART_DOWN].reg.size);
+
+ /* 10.1 set partition limit and chunk num */
+ chunk_num = 0;
+ partition_limit = part_table[PART_DOWN].mem.size;
+
+ while (chunk_num < fw_data_len / CHUNK_SIZE) {
+ /* 10.2 update partition, if needed */
+ addr = dest + (chunk_num + 2) * CHUNK_SIZE;
+ if (addr > partition_limit) {
+ addr = dest + chunk_num * CHUNK_SIZE;
+ partition_limit = chunk_num * CHUNK_SIZE +
+ part_table[PART_DOWN].mem.size;
+
+ /* FIXME: Over 80 chars! */
+ wl1271_set_partition(wl,
+ addr,
+ part_table[PART_DOWN].mem.size,
+ part_table[PART_DOWN].reg.start,
+ part_table[PART_DOWN].reg.size);
+ }
+
+ /* 10.3 upload the chunk */
+ addr = dest + chunk_num * CHUNK_SIZE;
+ p = buf + chunk_num * CHUNK_SIZE;
+ wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+ p, addr);
+ wl1271_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+
+ chunk_num++;
+ }
+
+ /* 10.4 upload the last chunk */
+ addr = dest + chunk_num * CHUNK_SIZE;
+ p = buf + chunk_num * CHUNK_SIZE;
+ wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
+ fw_data_len % CHUNK_SIZE, p, addr);
+ wl1271_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+ return 0;
+}
+
+static int wl1271_boot_upload_firmware(struct wl1271 *wl)
+{
+ u32 chunks, addr, len;
+ u8 *fw;
+
+ fw = wl->fw;
+ chunks = be32_to_cpup((u32 *) fw);
+ fw += sizeof(u32);
+
+ wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
+
+ while (chunks--) {
+ addr = be32_to_cpup((u32 *) fw);
+ fw += sizeof(u32);
+ len = be32_to_cpup((u32 *) fw);
+ fw += sizeof(u32);
+
+ if (len > 300000) {
+ wl1271_info("firmware chunk too long: %u", len);
+ return -EINVAL;
+ }
+ wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
+ chunks, addr, len);
+ wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+ fw += len;
+ }
+
+ return 0;
+}
+
+static int wl1271_boot_upload_nvs(struct wl1271 *wl)
+{
+ size_t nvs_len, burst_len;
+ int i;
+ u32 dest_addr, val;
+ u8 *nvs_ptr, *nvs, *nvs_aligned;
+
+ nvs = wl->nvs;
+ if (nvs == NULL)
+ return -ENODEV;
+
+ nvs_ptr = nvs;
+
+ nvs_len = wl->nvs_len;
+
+ /* Update the device MAC address into the nvs */
+ nvs[11] = wl->mac_addr[0];
+ nvs[10] = wl->mac_addr[1];
+ nvs[6] = wl->mac_addr[2];
+ nvs[5] = wl->mac_addr[3];
+ nvs[4] = wl->mac_addr[4];
+ nvs[3] = wl->mac_addr[5];
+
+ /*
+ * Layout before the actual NVS tables:
+ * 1 byte : burst length.
+ * 2 bytes: destination address.
+ * n bytes: data to burst copy.
+ *
+ * This is ended by a 0 length, then the NVS tables.
+ */
+
+ /* FIXME: Do we need to check here whether the LSB is 1? */
+ while (nvs_ptr[0]) {
+ burst_len = nvs_ptr[0];
+ dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+ /* FIXME: Due to our new wl1271_translate_reg_addr function,
+ we need to add the REGISTER_BASE to the destination */
+ dest_addr += REGISTERS_BASE;
+
+ /* We move our pointer to the data */
+ nvs_ptr += 3;
+
+ for (i = 0; i < burst_len; i++) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ wl1271_debug(DEBUG_BOOT,
+ "nvs burst write 0x%x: 0x%x",
+ dest_addr, val);
+ wl1271_reg_write32(wl, dest_addr, val);
+
+ nvs_ptr += 4;
+ dest_addr += 4;
+ }
+ }
+
+ /*
+ * We've reached the first zero length, the first NVS table
+ * is 7 bytes further.
+ */
+ nvs_ptr += 7;
+ nvs_len -= nvs_ptr - nvs;
+ nvs_len = ALIGN(nvs_len, 4);
+
+ /* FIXME: The driver sets the partition here, but this is not needed,
+ since it sets to the same one as currently in use */
+ /* Now we must set the partition correctly */
+ wl1271_set_partition(wl,
+ part_table[PART_WORK].mem.start,
+ part_table[PART_WORK].mem.size,
+ part_table[PART_WORK].reg.start,
+ part_table[PART_WORK].reg.size);
+
+ /* Copy the NVS tables to a new block to ensure alignment */
+ nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
+
+ /* And finally we upload the NVS tables */
+ /* FIXME: In wl1271, we upload everything at once.
+ No endianness handling needed here?! The ref driver doesn't do
+ anything about it at this point */
+ wl1271_spi_mem_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len);
+
+ kfree(nvs_aligned);
+ return 0;
+}
+
+static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
+{
+ enable_irq(wl->irq);
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+ WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+ wl1271_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+static int wl1271_boot_soft_reset(struct wl1271 *wl)
+{
+ unsigned long timeout;
+ u32 boot_data;
+
+ /* perform soft reset */
+ wl1271_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+ /* SOFT_RESET is self clearing */
+ timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+ while (1) {
+ boot_data = wl1271_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+ wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+ if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ /* 1.2 check pWhalBus->uSelfClearTime if the
+ * timeout was reached */
+ wl1271_error("soft reset timeout");
+ return -1;
+ }
+
+ udelay(SOFT_RESET_STALL_TIME);
+ }
+
+ /* disable Rx/Tx */
+ wl1271_reg_write32(wl, ENABLE, 0x0);
+
+ /* disable auto calibration on start*/
+ wl1271_reg_write32(wl, SPARE_A2, 0xffff);
+
+ return 0;
+}
+
+static int wl1271_boot_run_firmware(struct wl1271 *wl)
+{
+ int loop, ret;
+ u32 chip_id, interrupt;
+
+ wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+ chip_id = wl1271_reg_read32(wl, CHIP_ID_B);
+
+ wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+ if (chip_id != wl->chip.id) {
+ wl1271_error("chip id doesn't match after firmware boot");
+ return -EIO;
+ }
+
+ /* wait for init to complete */
+ loop = 0;
+ while (loop++ < INIT_LOOP) {
+ udelay(INIT_LOOP_DELAY);
+ interrupt = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+ if (interrupt == 0xffffffff) {
+ wl1271_error("error reading hardware complete "
+ "init indication");
+ return -EIO;
+ }
+ /* check that ACX_INTR_INIT_COMPLETE is enabled */
+ else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) {
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ WL1271_ACX_INTR_INIT_COMPLETE);
+ break;
+ }
+ }
+
+ if (loop >= INIT_LOOP) {
+ wl1271_error("timeout waiting for the hardware to "
+ "complete initialization");
+ return -EIO;
+ }
+
+ /* get hardware config command mail box */
+ wl->cmd_box_addr = wl1271_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+ /* get hardware config event mail box */
+ wl->event_box_addr = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+ /* set the working partition to its "running" mode offset */
+ wl1271_set_partition(wl,
+ part_table[PART_WORK].mem.start,
+ part_table[PART_WORK].mem.size,
+ part_table[PART_WORK].reg.start,
+ part_table[PART_WORK].reg.size);
+
+ wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+ wl->cmd_box_addr, wl->event_box_addr);
+
+ wl1271_boot_fw_version(wl);
+
+ /*
+ * in case of full asynchronous mode the firmware event must be
+ * ready to receive event from the command mailbox
+ */
+
+ /* enable gpio interrupts */
+ wl1271_boot_enable_interrupts(wl);
+
+ /* unmask all mbox events */
+ wl->event_mask = 0xffffffff;
+
+ ret = wl1271_event_unmask(wl);
+ if (ret < 0) {
+ wl1271_error("EVENT mask setting failed");
+ return ret;
+ }
+
+ wl1271_event_mbox_config(wl);
+
+ /* firmware startup completed */
+ return 0;
+}
+
+static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
+{
+ u32 polarity, status, i;
+
+ wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
+ wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_READ);
+
+ /* Wait until the command is complete (ie. bit 18 is set) */
+ for (i = 0; i < OCP_CMD_LOOP; i++) {
+ polarity = wl1271_reg_read32(wl, OCP_DATA_READ);
+ if (polarity & OCP_READY_MASK)
+ break;
+ }
+ if (i == OCP_CMD_LOOP) {
+ wl1271_error("OCP command timeout!");
+ return -EIO;
+ }
+
+ status = polarity & OCP_STATUS_MASK;
+ if (status != OCP_STATUS_OK) {
+ wl1271_error("OCP command failed (%d)", status);
+ return -EIO;
+ }
+
+ /* We use HIGH polarity, so unset the LOW bit */
+ polarity &= ~POLARITY_LOW;
+
+ wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
+ wl1271_reg_write32(wl, OCP_DATA_WRITE, polarity);
+ wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+
+ return 0;
+}
+
+int wl1271_boot(struct wl1271 *wl)
+{
+ int ret = 0;
+ u32 tmp, clk, pause;
+
+ if (REF_CLOCK == 0 || REF_CLOCK == 2)
+ /* ref clk: 19.2/38.4 */
+ clk = 0x3;
+ else if (REF_CLOCK == 1 || REF_CLOCK == 3)
+ /* ref clk: 26/52 */
+ clk = 0x5;
+
+ wl1271_reg_write32(wl, PLL_PARAMETERS, clk);
+
+ pause = wl1271_reg_read32(wl, PLL_PARAMETERS);
+
+ wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
+
+ pause &= ~(WU_COUNTER_PAUSE_VAL); /* FIXME: This should probably be
+ * WU_COUNTER_PAUSE_VAL instead of
+ * 0x3ff (magic number ). How does
+ * this work?! */
+ pause |= WU_COUNTER_PAUSE_VAL;
+ wl1271_reg_write32(wl, WU_COUNTER_PAUSE, pause);
+
+ /* Continue the ELP wake up sequence */
+ wl1271_reg_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ udelay(500);
+
+ wl1271_set_partition(wl,
+ part_table[PART_DRPW].mem.start,
+ part_table[PART_DRPW].mem.size,
+ part_table[PART_DRPW].reg.start,
+ part_table[PART_DRPW].reg.size);
+
+ /* Read-modify-write DRPW_SCRATCH_START register (see next state)
+ to be used by DRPw FW. The RTRIM value will be added by the FW
+ before taking DRPw out of reset */
+
+ wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
+ clk = wl1271_reg_read32(wl, DRPW_SCRATCH_START);
+
+ wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
+
+ /* 2 */
+ clk |= (REF_CLOCK << 1) << 4;
+ wl1271_reg_write32(wl, DRPW_SCRATCH_START, clk);
+
+ wl1271_set_partition(wl,
+ part_table[PART_WORK].mem.start,
+ part_table[PART_WORK].mem.size,
+ part_table[PART_WORK].reg.start,
+ part_table[PART_WORK].reg.size);
+
+ /* Disable interrupts */
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+
+ ret = wl1271_boot_soft_reset(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 2. start processing NVS file */
+ ret = wl1271_boot_upload_nvs(wl);
+ if (ret < 0)
+ goto out;
+
+ /* write firmware's last address (ie. it's length) to
+ * ACX_EEPROMLESS_IND_REG */
+ wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
+
+ wl1271_reg_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
+
+ tmp = wl1271_reg_read32(wl, CHIP_ID_B);
+
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
+
+ /* 6. read the EEPROM parameters */
+ tmp = wl1271_reg_read32(wl, SCR_PAD2);
+
+ ret = wl1271_boot_write_irq_polarity(wl);
+ if (ret < 0)
+ goto out;
+
+ /* FIXME: Need to check whether this is really what we want */
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+ WL1271_ACX_ALL_EVENTS_VECTOR);
+
+ /* WL1271: The reference driver skips steps 7 to 10 (jumps directly
+ * to upload_fw) */
+
+ ret = wl1271_boot_upload_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 10.5 start firmware */
+ ret = wl1271_boot_run_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ /* set the wl1271 default filters */
+ wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
+
+ wl1271_event_mbox_config(wl);
+
+out:
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h
new file mode 100644
index 0000000..b0d8fb4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -0,0 +1,72 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl1271.h"
+
+int wl1271_boot(struct wl1271 *wl);
+
+#define WL1271_NO_SUBBANDS 8
+#define WL1271_NO_POWER_LEVELS 4
+#define WL1271_FW_VERSION_MAX_LEN 20
+
+struct wl1271_static_data {
+ u8 mac_address[ETH_ALEN];
+ u8 padding[2];
+ u8 fw_version[WL1271_FW_VERSION_MAX_LEN];
+ u32 hw_version;
+ u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS];
+};
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#define REF_CLOCK 2
+#define WU_COUNTER_PAUSE_VAL 0x3FF
+#define WELP_ARM_COMMAND_VAL 0x4
+
+#define OCP_CMD_LOOP 32
+
+#define OCP_CMD_WRITE 0x1
+#define OCP_CMD_READ 0x2
+
+#define OCP_READY_MASK BIT(18)
+#define OCP_STATUS_MASK (BIT(16) | BIT(17))
+
+#define OCP_STATUS_NO_RESP 0x00000
+#define OCP_STATUS_OK 0x10000
+#define OCP_STATUS_REQ_FAILED 0x20000
+#define OCP_STATUS_RESP_ERROR 0x30000
+
+#define OCP_REG_POLARITY 0x30032
+
+#define CMD_MBOX_ADDRESS 0x407B4
+
+#define POLARITY_LOW BIT(1)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
new file mode 100644
index 0000000..2a4351f
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -0,0 +1,813 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+#include <linux/etherdevice.h>
+
+#include "wl1271.h"
+#include "wl1271_reg.h"
+#include "wl1271_spi.h"
+#include "wl1271_acx.h"
+#include "wl12xx_80211.h"
+#include "wl1271_cmd.h"
+
+/*
+ * send command to firmware
+ *
+ * @wl: wl struct
+ * @id: command id
+ * @buf: buffer containing the command, must work with dma
+ * @len: length of the buffer
+ */
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len)
+{
+ struct wl1271_cmd_header *cmd;
+ unsigned long timeout;
+ u32 intr;
+ int ret = 0;
+
+ cmd = buf;
+ cmd->id = id;
+ cmd->status = 0;
+
+ WARN_ON(len % 4 != 0);
+
+ wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len);
+
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+ timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
+
+ intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
+ if (time_after(jiffies, timeout)) {
+ wl1271_error("command complete timeout");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ msleep(1);
+
+ intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ }
+
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ WL1271_ACX_INTR_CMD_COMPLETE);
+
+out:
+ return ret;
+}
+
+int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
+{
+ struct wl1271_cmd_cal_channel_tune *cmd;
+ int ret = 0;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->test.id = TEST_CMD_CHANNEL_TUNE;
+
+ cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4;
+ /* set up any channel, 7 is in the middle of the range */
+ cmd->channel = 7;
+
+ ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
+ if (ret < 0)
+ wl1271_warning("TEST_CMD_CHANNEL_TUNE failed");
+
+ kfree(cmd);
+ return ret;
+}
+
+int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
+{
+ struct wl1271_cmd_cal_update_ref_point *cmd;
+ int ret = 0;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT;
+
+ /* FIXME: still waiting for the correct values */
+ cmd->ref_power = 0;
+ cmd->ref_detector = 0;
+
+ cmd->sub_band = WL1271_PD_REFERENCE_POINT_BAND_B_G;
+
+ ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
+ if (ret < 0)
+ wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed");
+
+ kfree(cmd);
+ return ret;
+}
+
+int wl1271_cmd_cal_p2g(struct wl1271 *wl)
+{
+ struct wl1271_cmd_cal_p2g *cmd;
+ int ret = 0;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->test.id = TEST_CMD_P2G_CAL;
+
+ cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G;
+
+ ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0);
+ if (ret < 0)
+ wl1271_warning("TEST_CMD_P2G_CAL failed");
+
+ kfree(cmd);
+ return ret;
+}
+
+int wl1271_cmd_cal(struct wl1271 *wl)
+{
+ /*
+ * FIXME: we must make sure that we're not sleeping when calibration
+ * is done
+ */
+ int ret;
+
+ wl1271_notice("performing tx calibration");
+
+ ret = wl1271_cmd_cal_channel_tune(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_cal_update_ref_point(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_cal_p2g(wl);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait)
+{
+ static bool do_cal = true;
+ unsigned long timeout;
+ struct wl1271_cmd_join *join;
+ int ret, i;
+ u8 *bssid;
+
+ /* FIXME: remove when we get calibration from the factory */
+ if (do_cal) {
+ ret = wl1271_cmd_cal(wl);
+ if (ret < 0)
+ wl1271_warning("couldn't calibrate");
+ else
+ do_cal = false;
+ }
+
+
+ join = kzalloc(sizeof(*join), GFP_KERNEL);
+ if (!join) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_CMD, "cmd join");
+
+ /* Reverse order BSSID */
+ bssid = (u8 *) &join->bssid_lsb;
+ for (i = 0; i < ETH_ALEN; i++)
+ bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+ join->rx_config_options = wl->rx_config;
+ join->rx_filter_options = wl->rx_filter;
+
+ join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+ RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+ join->beacon_interval = beacon_interval;
+ join->dtim_interval = dtim_interval;
+ join->bss_type = bss_type;
+ join->channel = wl->channel;
+ join->ssid_len = wl->ssid_len;
+ memcpy(join->ssid, wl->ssid, wl->ssid_len);
+ join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH;
+
+ /* increment the session counter */
+ wl->session_counter++;
+ if (wl->session_counter >= SESSION_COUNTER_MAX)
+ wl->session_counter = 0;
+
+ join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
+
+
+ ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+ if (ret < 0) {
+ wl1271_error("failed to initiate cmd join");
+ goto out_free;
+ }
+
+ timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+
+ /*
+ * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
+ * simplify locking we just sleep instead, for now
+ */
+ if (wait)
+ msleep(10);
+
+out_free:
+ kfree(join);
+
+out:
+ return ret;
+}
+
+/**
+ * send test command to firmware
+ *
+ * @wl: wl struct
+ * @buf: buffer containing the command, with all headers, must work with dma
+ * @len: length of the buffer
+ * @answer: is answer needed
+ */
+int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
+{
+ int ret;
+
+ wl1271_debug(DEBUG_CMD, "cmd test");
+
+ ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len);
+
+ if (ret < 0) {
+ wl1271_warning("TEST command failed");
+ return ret;
+ }
+
+ if (answer) {
+ struct wl1271_command *cmd_answer;
+
+ /*
+ * The test command got in, we can read the answer.
+ * The answer would be a wl1271_command, where the
+ * parameter array contains the actual answer.
+ */
+ wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+ cmd_answer = buf;
+
+ if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
+ wl1271_error("TEST command answer error: %d",
+ cmd_answer->header.status);
+ }
+
+ return 0;
+}
+
+/**
+ * read acx from firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer for the response, including all headers, must work with dma
+ * @len: lenght of buf
+ */
+int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
+{
+ struct acx_header *acx = buf;
+ int ret;
+
+ wl1271_debug(DEBUG_CMD, "cmd interrogate");
+
+ acx->id = id;
+
+ /* payload length, does not include any headers */
+ acx->len = len - sizeof(*acx);
+
+ ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
+ if (ret < 0) {
+ wl1271_error("INTERROGATE command failed");
+ goto out;
+ }
+
+ /* the interrogate command got in, we can read the answer */
+ wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len);
+
+ acx = buf;
+ if (acx->cmd.status != CMD_STATUS_SUCCESS)
+ wl1271_error("INTERROGATE command error: %d",
+ acx->cmd.status);
+
+out:
+ return ret;
+}
+
+/**
+ * write acx value to firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer containing acx, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
+{
+ struct acx_header *acx = buf;
+ int ret;
+
+ wl1271_debug(DEBUG_CMD, "cmd configure");
+
+ acx->id = id;
+
+ /* payload length, does not include any headers */
+ acx->len = len - sizeof(*acx);
+
+ ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len);
+ if (ret < 0) {
+ wl1271_warning("CONFIGURE command NOK");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable)
+{
+ struct cmd_enabledisable_path *cmd;
+ int ret;
+ u16 cmd_rx, cmd_tx;
+
+ wl1271_debug(DEBUG_CMD, "cmd data path");
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->channel = channel;
+
+ if (enable) {
+ cmd_rx = CMD_ENABLE_RX;
+ cmd_tx = CMD_ENABLE_TX;
+ } else {
+ cmd_rx = CMD_DISABLE_RX;
+ cmd_tx = CMD_DISABLE_TX;
+ }
+
+ ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1271_error("rx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+ ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1271_error("tx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ return ret;
+ }
+
+ wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+out:
+ kfree(cmd);
+ return ret;
+}
+
+int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode)
+{
+ struct wl1271_cmd_ps_params *ps_params = NULL;
+ int ret = 0;
+
+ /* FIXME: this should be in ps.c */
+ ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP,
+ wl->listen_int);
+ if (ret < 0) {
+ wl1271_error("couldn't set wake up conditions");
+ goto out;
+ }
+
+ wl1271_debug(DEBUG_CMD, "cmd set ps mode");
+
+ ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
+ if (!ps_params) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ps_params->ps_mode = ps_mode;
+ ps_params->send_null_data = 1;
+ ps_params->retries = 5;
+ ps_params->hang_over_period = 128;
+ ps_params->null_data_rate = 1; /* 1 Mbps */
+
+ ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
+ sizeof(*ps_params));
+ if (ret < 0) {
+ wl1271_error("cmd set_ps_mode failed");
+ goto out;
+ }
+
+out:
+ kfree(ps_params);
+ return ret;
+}
+
+int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
+ size_t len)
+{
+ struct cmd_read_write_memory *cmd;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_CMD, "cmd read memory");
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ WARN_ON(len > MAX_READ_SIZE);
+ len = min_t(size_t, len, MAX_READ_SIZE);
+
+ cmd->addr = addr;
+ cmd->size = len;
+
+ ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1271_error("read memory command failed: %d", ret);
+ goto out;
+ }
+
+ /* the read command got in, we can now read the answer */
+ wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+ if (cmd->header.status != CMD_STATUS_SUCCESS)
+ wl1271_error("error in read command result: %d",
+ cmd->header.status);
+
+ memcpy(answer, cmd->value, len);
+
+out:
+ kfree(cmd);
+ return ret;
+}
+
+int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
+ u8 active_scan, u8 high_prio, u8 num_channels,
+ u8 probe_requests)
+{
+
+ struct wl1271_cmd_trigger_scan_to *trigger = NULL;
+ struct wl1271_cmd_scan *params = NULL;
+ int i, ret;
+ u16 scan_options = 0;
+
+ if (wl->scanning)
+ return -EINVAL;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+ params->params.rx_filter_options =
+ cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+ if (!active_scan)
+ scan_options |= WL1271_SCAN_OPT_PASSIVE;
+ if (high_prio)
+ scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH;
+ params->params.scan_options = scan_options;
+
+ params->params.num_channels = num_channels;
+ params->params.num_probe_requests = probe_requests;
+ params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS);
+ params->params.tid_trigger = 0;
+ params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
+
+ for (i = 0; i < num_channels; i++) {
+ params->channels[i].min_duration =
+ cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
+ params->channels[i].max_duration =
+ cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
+ memset(¶ms->channels[i].bssid_lsb, 0xff, 4);
+ memset(¶ms->channels[i].bssid_msb, 0xff, 2);
+ params->channels[i].early_termination = 0;
+ params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR;
+ params->channels[i].channel = i + 1;
+ }
+
+ if (len && ssid) {
+ params->params.ssid_len = len;
+ memcpy(params->params.ssid, ssid, len);
+ }
+
+ ret = wl1271_cmd_build_probe_req(wl, ssid, len);
+ if (ret < 0) {
+ wl1271_error("PROBE request template failed");
+ goto out;
+ }
+
+ trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
+ if (!trigger) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* disable the timeout */
+ trigger->timeout = 0;
+
+ ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
+ sizeof(*trigger));
+ if (ret < 0) {
+ wl1271_error("trigger scan to failed for hw scan");
+ goto out;
+ }
+
+ wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+ wl->scanning = true;
+
+ ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+ if (ret < 0) {
+ wl1271_error("SCAN failed");
+ goto out;
+ }
+
+ wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+ if (params->header.status != CMD_STATUS_SUCCESS) {
+ wl1271_error("Scan command error: %d",
+ params->header.status);
+ wl->scanning = false;
+ ret = -EIO;
+ goto out;
+ }
+
+out:
+ kfree(params);
+ return ret;
+}
+
+int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
+ void *buf, size_t buf_len)
+{
+ struct wl1271_cmd_template_set *cmd;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id);
+
+ WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE);
+ buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE);
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->len = cpu_to_le16(buf_len);
+ cmd->template_type = template_id;
+ cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
+ cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT;
+ cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT;
+
+ if (buf)
+ memcpy(cmd->template_data, buf, buf_len);
+
+ ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1271_warning("cmd set_template failed: %d", ret);
+ goto out_free;
+ }
+
+out_free:
+ kfree(cmd);
+
+out:
+ return ret;
+}
+
+static int wl1271_build_basic_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+ return index;
+}
+
+static int wl1271_build_extended_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_OFDM_RATE_6MB;
+ rates[index++] = IEEE80211_OFDM_RATE_9MB;
+ rates[index++] = IEEE80211_OFDM_RATE_12MB;
+ rates[index++] = IEEE80211_OFDM_RATE_18MB;
+ rates[index++] = IEEE80211_OFDM_RATE_24MB;
+ rates[index++] = IEEE80211_OFDM_RATE_36MB;
+ rates[index++] = IEEE80211_OFDM_RATE_48MB;
+ rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+ return index;
+}
+
+int wl1271_cmd_build_null_data(struct wl1271 *wl)
+{
+ struct wl12xx_null_data_template template;
+
+ if (!is_zero_ether_addr(wl->bssid)) {
+ memcpy(template.header.da, wl->bssid, ETH_ALEN);
+ memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+ } else {
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ }
+
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_NULLFUNC);
+
+ return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template,
+ sizeof(template));
+
+}
+
+int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid)
+{
+ struct wl12xx_ps_poll_template template;
+
+ memcpy(template.bssid, wl->bssid, ETH_ALEN);
+ memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+ template.aid = aid;
+ template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+ return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template,
+ sizeof(template));
+
+}
+
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len)
+{
+ struct wl12xx_probe_req_template template;
+ struct wl12xx_ie_rates *rates;
+ char *ptr;
+ u16 size;
+
+ ptr = (char *)&template;
+ size = sizeof(struct ieee80211_header);
+
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+ /* IEs */
+ /* SSID */
+ template.ssid.header.id = WLAN_EID_SSID;
+ template.ssid.header.len = ssid_len;
+ if (ssid_len && ssid)
+ memcpy(template.ssid.ssid, ssid, ssid_len);
+ size += sizeof(struct wl12xx_ie_header) + ssid_len;
+ ptr += size;
+
+ /* Basic Rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_SUPP_RATES;
+ rates->header.len = wl1271_build_basic_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+ ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ /* Extended rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+ rates->header.len = wl1271_build_extended_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+ return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+ &template, size);
+}
+
+int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
+{
+ struct wl1271_cmd_set_keys *cmd;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id);
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ cmd->id = id;
+ cmd->key_action = KEY_SET_ID;
+ cmd->key_type = KEY_WEP;
+
+ ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1271_warning("cmd set_default_wep_key failed: %d", ret);
+ goto out;
+ }
+
+out:
+ kfree(cmd);
+
+ return ret;
+}
+
+int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
+ u8 key_size, const u8 *key, const u8 *addr)
+{
+ struct wl1271_cmd_set_keys *cmd;
+ int ret = 0;
+
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (key_type != KEY_WEP)
+ memcpy(cmd->addr, addr, ETH_ALEN);
+
+ cmd->key_action = action;
+ cmd->key_size = key_size;
+ cmd->key_type = key_type;
+
+ /* we have only one SSID profile */
+ cmd->ssid_profile = 0;
+
+ cmd->id = id;
+
+ /* FIXME: this is from wl1251, needs to be checked */
+ if (key_type == KEY_TKIP) {
+ /*
+ * We get the key in the following form:
+ * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+ * but the target is expecting:
+ * TKIP - RX MIC - TX MIC
+ */
+ memcpy(cmd->key, key, 16);
+ memcpy(cmd->key + 16, key + 24, 8);
+ memcpy(cmd->key + 24, key + 16, 8);
+
+ } else {
+ memcpy(cmd->key, key, key_size);
+ }
+
+ wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
+
+ ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+ if (ret < 0) {
+ wl1271_warning("could not set keys");
+ goto out;
+ }
+
+out:
+ kfree(cmd);
+
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
new file mode 100644
index 0000000..951a844
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -0,0 +1,464 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_CMD_H__
+#define __WL1271_CMD_H__
+
+#include "wl1271.h"
+
+struct acx_header;
+
+int wl1271_cmd_send(struct wl1271 *wl, u16 type, void *buf, size_t buf_len);
+int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait);
+int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
+int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
+int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
+int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable);
+int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode);
+int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
+ size_t len);
+int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
+ u8 active_scan, u8 high_prio, u8 num_channels,
+ u8 probe_requests);
+int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
+ void *buf, size_t buf_len);
+int wl1271_cmd_build_null_data(struct wl1271 *wl);
+int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len);
+int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
+int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
+ u8 key_size, const u8 *key, const u8 *addr);
+
+enum wl1271_commands {
+ CMD_INTERROGATE = 1, /*use this to read information elements*/
+ CMD_CONFIGURE = 2, /*use this to write information elements*/
+ CMD_ENABLE_RX = 3,
+ CMD_ENABLE_TX = 4,
+ CMD_DISABLE_RX = 5,
+ CMD_DISABLE_TX = 6,
+ CMD_SCAN = 8,
+ CMD_STOP_SCAN = 9,
+ CMD_START_JOIN = 11,
+ CMD_SET_KEYS = 12,
+ CMD_READ_MEMORY = 13,
+ CMD_WRITE_MEMORY = 14,
+ CMD_SET_TEMPLATE = 19,
+ CMD_TEST = 23,
+ CMD_NOISE_HIST = 28,
+ CMD_LNA_CONTROL = 32,
+ CMD_SET_BCN_MODE = 33,
+ CMD_MEASUREMENT = 34,
+ CMD_STOP_MEASUREMENT = 35,
+ CMD_DISCONNECT = 36,
+ CMD_SET_PS_MODE = 37,
+ CMD_CHANNEL_SWITCH = 38,
+ CMD_STOP_CHANNEL_SWICTH = 39,
+ CMD_AP_DISCOVERY = 40,
+ CMD_STOP_AP_DISCOVERY = 41,
+ CMD_SPS_SCAN = 42,
+ CMD_STOP_SPS_SCAN = 43,
+ CMD_HEALTH_CHECK = 45,
+ CMD_DEBUG = 46,
+ CMD_TRIGGER_SCAN_TO = 47,
+ CMD_CONNECTION_SCAN_CFG = 48,
+ CMD_CONNECTION_SCAN_SSID_CFG = 49,
+ CMD_START_PERIODIC_SCAN = 50,
+ CMD_STOP_PERIODIC_SCAN = 51,
+ CMD_SET_STA_STATE = 52,
+
+ NUM_COMMANDS,
+ MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+enum cmd_templ {
+ CMD_TEMPL_NULL_DATA = 0,
+ CMD_TEMPL_BEACON,
+ CMD_TEMPL_CFG_PROBE_REQ_2_4,
+ CMD_TEMPL_CFG_PROBE_REQ_5,
+ CMD_TEMPL_PROBE_RESPONSE,
+ CMD_TEMPL_QOS_NULL_DATA,
+ CMD_TEMPL_PS_POLL,
+ CMD_TEMPL_KLV,
+ CMD_TEMPL_DISCONNECT,
+ CMD_TEMPL_PROBE_REQ_2_4, /* for firmware internal use only */
+ CMD_TEMPL_PROBE_REQ_5, /* for firmware internal use only */
+ CMD_TEMPL_BAR, /* for firmware internal use only */
+ CMD_TEMPL_CTS, /*
+ * For CTS-to-self (FastCTS) mechanism
+ * for BT/WLAN coexistence (SoftGemini). */
+ CMD_TEMPL_MAX = 0xff
+};
+
+/* unit ms */
+#define WL1271_COMMAND_TIMEOUT 2000
+#define WL1271_CMD_TEMPL_MAX_SIZE 252
+
+struct wl1271_cmd_header {
+ u16 id;
+ u16 status;
+ /* payload */
+ u8 data[0];
+} __attribute__ ((packed));
+
+#define WL1271_CMD_MAX_PARAMS 572
+
+struct wl1271_command {
+ struct wl1271_cmd_header header;
+ u8 parameters[WL1271_CMD_MAX_PARAMS];
+} __attribute__ ((packed));
+
+enum {
+ CMD_MAILBOX_IDLE = 0,
+ CMD_STATUS_SUCCESS = 1,
+ CMD_STATUS_UNKNOWN_CMD = 2,
+ CMD_STATUS_UNKNOWN_IE = 3,
+ CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11,
+ CMD_STATUS_RX_BUSY = 13,
+ CMD_STATUS_INVALID_PARAM = 14,
+ CMD_STATUS_TEMPLATE_TOO_LARGE = 15,
+ CMD_STATUS_OUT_OF_MEMORY = 16,
+ CMD_STATUS_STA_TABLE_FULL = 17,
+ CMD_STATUS_RADIO_ERROR = 18,
+ CMD_STATUS_WRONG_NESTING = 19,
+ CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/
+ CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/
+ MAX_COMMAND_STATUS = 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+ struct wl1271_cmd_header header;
+
+ /* The address of the memory to read from or write to.*/
+ u32 addr;
+
+ /* The amount of data in bytes to read from or write to the WiLink
+ * device.*/
+ u32 size;
+
+ /* The actual value read from or written to the Wilink. The source
+ of this field is the Host in WRITE command or the Wilink in READ
+ command. */
+ u8 value[MAX_READ_SIZE];
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+enum {
+ BSS_TYPE_IBSS = 0,
+ BSS_TYPE_STA_BSS = 2,
+ BSS_TYPE_AP_BSS = 3,
+ MAX_BSS_TYPE = 0xFF
+};
+
+#define WL1271_JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */
+#define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1
+
+struct wl1271_cmd_join {
+ struct wl1271_cmd_header header;
+
+ u32 bssid_lsb;
+ u16 bssid_msb;
+ u16 beacon_interval; /* in TBTTs */
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * The target uses this field to determine the rate at
+ * which to transmit control frame responses (such as
+ * ACK or CTS frames).
+ */
+ u32 basic_rate_set;
+ u8 dtim_interval;
+ /*
+ * bits 0-2: This bitwise field specifies the type
+ * of BSS to start or join (BSS_TYPE_*).
+ * bit 4: Band - The radio band in which to join
+ * or start.
+ * 0 - 2.4GHz band
+ * 1 - 5GHz band
+ * bits 3, 5-7: Reserved
+ */
+ u8 bss_type;
+ u8 channel;
+ u8 ssid_len;
+ u8 ssid[IW_ESSID_MAX_SIZE];
+ u8 ctrl; /* JOIN_CMD_CTRL_* */
+ u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_enabledisable_path {
+ struct wl1271_cmd_header header;
+
+ u8 channel;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct wl1271_cmd_template_set {
+ struct wl1271_cmd_header header;
+
+ u16 len;
+ u8 template_type;
+ u8 index; /* relevant only for KLV_TEMPLATE type */
+ u32 enabled_rates;
+ u8 short_retry_limit;
+ u8 long_retry_limit;
+ u8 aflags;
+ u8 reserved;
+ u8 template_data[WL1271_CMD_TEMPL_MAX_SIZE];
+} __attribute__ ((packed));
+
+#define TIM_ELE_ID 5
+#define PARTIAL_VBM_MAX 251
+
+struct wl1271_tim {
+ u8 identity;
+ u8 length;
+ u8 dtim_count;
+ u8 dtim_period;
+ u8 bitmap_ctrl;
+ u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __attribute__ ((packed));
+
+enum wl1271_cmd_ps_mode {
+ STATION_ACTIVE_MODE,
+ STATION_POWER_SAVE_MODE
+};
+
+struct wl1271_cmd_ps_params {
+ struct wl1271_cmd_header header;
+
+ u8 ps_mode; /* STATION_* */
+ u8 send_null_data; /* Do we have to send NULL data packet ? */
+ u8 retries; /* Number of retires for the initial NULL data packet */
+
+ /*
+ * TUs during which the target stays awake after switching
+ * to power save mode.
+ */
+ u8 hang_over_period;
+ u32 null_data_rate;
+} __attribute__ ((packed));
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE 0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE 0x80
+
+enum wl1271_cmd_key_action {
+ KEY_ADD_OR_REPLACE = 1,
+ KEY_REMOVE = 2,
+ KEY_SET_ID = 3,
+ MAX_KEY_ACTION = 0xffff,
+};
+
+enum wl1271_cmd_key_type {
+ KEY_NONE = 0,
+ KEY_WEP = 1,
+ KEY_TKIP = 2,
+ KEY_AES = 3,
+ KEY_GEM = 4
+};
+
+/* FIXME: Add description for key-types */
+
+struct wl1271_cmd_set_keys {
+ struct wl1271_cmd_header header;
+
+ /* Ignored for default WEP key */
+ u8 addr[ETH_ALEN];
+
+ /* key_action_e */
+ u16 key_action;
+
+ u16 reserved_1;
+
+ /* key size in bytes */
+ u8 key_size;
+
+ /* key_type_e */
+ u8 key_type;
+ u8 ssid_profile;
+
+ /*
+ * TKIP, AES: frame's key id field.
+ * For WEP default key: key id;
+ */
+ u8 id;
+ u8 reserved_2[6];
+ u8 key[MAX_KEY_SIZE];
+ u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+ u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __attribute__ ((packed));
+
+
+#define WL1271_SCAN_MAX_CHANNELS 24
+#define WL1271_SCAN_DEFAULT_TAG 1
+#define WL1271_SCAN_CURRENT_TX_PWR 0
+#define WL1271_SCAN_OPT_ACTIVE 0
+#define WL1271_SCAN_OPT_PASSIVE 1
+#define WL1271_SCAN_OPT_PRIORITY_HIGH 4
+#define WL1271_SCAN_CHAN_MIN_DURATION 30000 /* TU */
+#define WL1271_SCAN_CHAN_MAX_DURATION 60000 /* TU */
+
+struct basic_scan_params {
+ u32 rx_config_options;
+ u32 rx_filter_options;
+ /* Scan option flags (WL1271_SCAN_OPT_*) */
+ u16 scan_options;
+ /* Number of scan channels in the list (maximum 30) */
+ u8 num_channels;
+ /* This field indicates the number of probe requests to send
+ per channel for an active scan */
+ u8 num_probe_requests;
+ /* Rate bit field for sending the probes */
+ u32 tx_rate;
+ u8 tid_trigger;
+ u8 ssid_len;
+ /* in order to align */
+ u8 padding1[2];
+ u8 ssid[IW_ESSID_MAX_SIZE];
+ /* Band to scan */
+ u8 band;
+ u8 use_ssid_list;
+ u8 scan_tag;
+ u8 padding2;
+} __attribute__ ((packed));
+
+struct basic_scan_channel_params {
+ /* Duration in TU to wait for frames on a channel for active scan */
+ u32 min_duration;
+ u32 max_duration;
+ u32 bssid_lsb;
+ u16 bssid_msb;
+ u8 early_termination;
+ u8 tx_power_att;
+ u8 channel;
+ /* FW internal use only! */
+ u8 dfs_candidate;
+ u8 activity_detected;
+ u8 pad;
+} __attribute__ ((packed));
+
+struct wl1271_cmd_scan {
+ struct wl1271_cmd_header header;
+
+ struct basic_scan_params params;
+ struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS];
+} __attribute__ ((packed));
+
+struct wl1271_cmd_trigger_scan_to {
+ struct wl1271_cmd_header header;
+
+ u32 timeout;
+};
+
+struct wl1271_cmd_test_header {
+ u8 id;
+ u8 padding[3];
+};
+
+enum wl1271_channel_tune_bands {
+ WL1271_CHANNEL_TUNE_BAND_2_4,
+ WL1271_CHANNEL_TUNE_BAND_5,
+ WL1271_CHANNEL_TUNE_BAND_4_9
+};
+
+#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0
+
+#define TEST_CMD_P2G_CAL 0x02
+#define TEST_CMD_CHANNEL_TUNE 0x0d
+#define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d
+
+struct wl1271_cmd_cal_channel_tune {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ u8 band;
+ u8 channel;
+
+ u16 radio_status;
+} __attribute__ ((packed));
+
+struct wl1271_cmd_cal_update_ref_point {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ s32 ref_power;
+ s32 ref_detector;
+ u8 sub_band;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+#define MAX_TLV_LENGTH 400
+#define MAX_NVS_VERSION_LENGTH 12
+
+#define WL1271_CAL_P2G_BAND_B_G BIT(0)
+
+struct wl1271_cmd_cal_p2g {
+ struct wl1271_cmd_header header;
+
+ struct wl1271_cmd_test_header test;
+
+ u16 len;
+ u8 buf[MAX_TLV_LENGTH];
+ u8 type;
+ u8 padding;
+
+ s16 radio_status;
+ u8 nvs_version[MAX_NVS_VERSION_LENGTH];
+
+ u8 sub_band_mask;
+ u8 padding2;
+} __attribute__ ((packed));
+
+#endif /* __WL1271_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
new file mode 100644
index 0000000..c1805e5
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
@@ -0,0 +1,518 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1271_debugfs.h"
+
+#include <linux/skbuff.h>
+
+#include "wl1271.h"
+#include "wl1271_acx.h"
+#include "wl1271_ps.h"
+
+/* ms */
+#define WL1271_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \
+static ssize_t name## _read(struct file *file, char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl1271 *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", ##value); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations name## _ops = { \
+ .read = name## _read, \
+ .open = wl1271_open_file_generic, \
+};
+
+#define DEBUGFS_ADD(name, parent) \
+ wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \
+ wl, &name## _ops); \
+ if (IS_ERR(wl->debugfs.name)) { \
+ ret = PTR_ERR(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ goto out; \
+ }
+
+#define DEBUGFS_DEL(name) \
+ do { \
+ debugfs_remove(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ } while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt) \
+static ssize_t sub## _ ##name## _read(struct file *file, \
+ char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl1271 *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ wl1271_debugfs_update_stats(wl); \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", \
+ wl->stats.fw_stats->sub.name); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations sub## _ ##name## _ops = { \
+ .read = sub## _ ##name## _read, \
+ .open = wl1271_open_file_generic, \
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name) \
+ DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name) \
+ DEBUGFS_DEL(sub## _ ##name)
+
+static void wl1271_debugfs_update_stats(struct wl1271 *wl)
+{
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ if (wl->state == WL1271_STATE_ON &&
+ time_after(jiffies, wl->stats.fw_stats_update +
+ msecs_to_jiffies(WL1271_DEBUGFS_STATS_LIFETIME))) {
+ wl1271_acx_statistics(wl, wl->stats.fw_stats);
+ wl->stats.fw_stats_update = jiffies;
+ }
+
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1271_open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+ 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+ wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct wl1271 *wl = file->private_data;
+ u32 queue_len;
+ char buf[20];
+ int res;
+
+ queue_len = skb_queue_len(&wl->tx_queue);
+
+ res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+ .read = tx_queue_len_read,
+ .open = wl1271_open_file_generic,
+};
+
+static void wl1271_debugfs_delete_files(struct wl1271 *wl)
+{
+ DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+ DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+ DEBUGFS_FWSTATS_DEL(rx, dropped);
+ DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+ DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_DEL(rx, path_reset);
+ DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+ DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_DEL(isr, fiqs);
+ DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+ DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+ DEBUGFS_FWSTATS_DEL(isr, irqs);
+ DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+ DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_DEL(isr, commands);
+ DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+ DEBUGFS_FWSTATS_DEL(isr, wakeups);
+ DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+ DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+ DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(wep, packets);
+ DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+ DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+ DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+ DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_DEL(event, heart_beat);
+ DEBUGFS_FWSTATS_DEL(event, calibration);
+ DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+ DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_DEL(event, rx_pool);
+ DEBUGFS_FWSTATS_DEL(event, oom_late);
+ DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_DEL(tx_queue_len);
+ DEBUGFS_DEL(retry_count);
+ DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl1271_debugfs_add_files(struct wl1271 *wl)
+{
+ int ret = 0;
+
+ DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+ DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+ DEBUGFS_FWSTATS_ADD(rx, dropped);
+ DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+ DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_ADD(rx, path_reset);
+ DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+ DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_ADD(isr, fiqs);
+ DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+ DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+ DEBUGFS_FWSTATS_ADD(isr, irqs);
+ DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+ DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_ADD(isr, commands);
+ DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+ DEBUGFS_FWSTATS_ADD(isr, wakeups);
+ DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+ DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+ DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(wep, packets);
+ DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+ DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+ DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+ DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_ADD(event, heart_beat);
+ DEBUGFS_FWSTATS_ADD(event, calibration);
+ DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+ DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_ADD(event, rx_pool);
+ DEBUGFS_FWSTATS_ADD(event, oom_late);
+ DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+ DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+ DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+ if (ret < 0)
+ wl1271_debugfs_delete_files(wl);
+
+ return ret;
+}
+
+void wl1271_debugfs_reset(struct wl1271 *wl)
+{
+ memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+ wl->stats.retry_count = 0;
+ wl->stats.excessive_retries = 0;
+}
+
+int wl1271_debugfs_init(struct wl1271 *wl)
+{
+ int ret;
+
+ wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ if (IS_ERR(wl->debugfs.rootdir)) {
+ ret = PTR_ERR(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+ goto err;
+ }
+
+ wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+ wl->debugfs.rootdir);
+
+ if (IS_ERR(wl->debugfs.fw_statistics)) {
+ ret = PTR_ERR(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+ goto err_root;
+ }
+
+ wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+ GFP_KERNEL);
+
+ if (!wl->stats.fw_stats) {
+ ret = -ENOMEM;
+ goto err_fw;
+ }
+
+ wl->stats.fw_stats_update = jiffies;
+
+ ret = wl1271_debugfs_add_files(wl);
+
+ if (ret < 0)
+ goto err_file;
+
+ return 0;
+
+err_file:
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+err_fw:
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+err_root:
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+err:
+ return ret;
+}
+
+void wl1271_debugfs_exit(struct wl1271 *wl)
+{
+ wl1271_debugfs_delete_files(wl);
+
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.h b/drivers/net/wireless/wl12xx/wl1271_debugfs.h
new file mode 100644
index 0000000..00a45b2
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL1271_DEBUGFS_H
+#define WL1271_DEBUGFS_H
+
+#include "wl1271.h"
+
+int wl1271_debugfs_init(struct wl1271 *wl);
+void wl1271_debugfs_exit(struct wl1271 *wl);
+void wl1271_debugfs_reset(struct wl1271 *wl);
+
+#endif /* WL1271_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
new file mode 100644
index 0000000..f3afd4a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -0,0 +1,125 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1271.h"
+#include "wl1271_reg.h"
+#include "wl1271_spi.h"
+#include "wl1271_event.h"
+#include "wl1271_ps.h"
+
+static int wl1271_event_scan_complete(struct wl1271 *wl,
+ struct event_mailbox *mbox)
+{
+ wl1271_debug(DEBUG_EVENT, "status: 0x%x",
+ mbox->scheduled_scan_status);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, false);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ return 0;
+}
+
+static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
+{
+ wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
+ wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+ wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
+{
+ int ret;
+ u32 vector;
+
+ wl1271_event_mbox_dump(mbox);
+
+ vector = mbox->events_vector & ~(mbox->events_mask);
+ wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+ if (vector & SCAN_COMPLETE_EVENT_ID) {
+ ret = wl1271_event_scan_complete(wl, mbox);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vector & BSS_LOSE_EVENT_ID) {
+ wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+ if (wl->psm_requested && wl->psm) {
+ ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+int wl1271_event_unmask(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void wl1271_event_mbox_config(struct wl1271 *wl)
+{
+ wl->mbox_ptr[0] = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+ wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+ wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+ wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
+{
+ struct event_mailbox mbox;
+ int ret;
+
+ wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+ if (mbox_num > 1)
+ return -EINVAL;
+
+ /* first we read the mbox descriptor */
+ wl1271_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+ sizeof(struct event_mailbox));
+
+ /* process the descriptor */
+ ret = wl1271_event_process(wl, &mbox);
+ if (ret < 0)
+ return ret;
+
+ /* then we let the firmware know it can go on...*/
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
new file mode 100644
index 0000000..2cdce7c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -0,0 +1,110 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_EVENT_H__
+#define __WL1271_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+ MEASUREMENT_START_EVENT_ID = BIT(8),
+ MEASUREMENT_COMPLETE_EVENT_ID = BIT(9),
+ SCAN_COMPLETE_EVENT_ID = BIT(10),
+ SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(11),
+ AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12),
+ PS_REPORT_EVENT_ID = BIT(13),
+ PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14),
+ DISCONNECT_EVENT_COMPLETE_ID = BIT(15),
+ JOIN_EVENT_COMPLETE_ID = BIT(16),
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17),
+ BSS_LOSE_EVENT_ID = BIT(18),
+ REGAINED_BSS_EVENT_ID = BIT(19),
+ ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(20),
+ SOFT_GEMINI_SENSE_EVENT_ID = BIT(22),
+ SOFT_GEMINI_PREDICTION_EVENT_ID = BIT(23),
+ SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24),
+ PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25),
+ DBG_EVENT_ID = BIT(26),
+ HEALTH_CHECK_REPLY_EVENT_ID = BIT(27),
+ PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28),
+ PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29),
+ BA_SESSION_TEAR_DOWN_EVENT_ID = BIT(30),
+ EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
+};
+
+struct event_debug_report {
+ u8 debug_event_id;
+ u8 num_params;
+ u16 pad;
+ u32 report_1;
+ u32 report_2;
+ u32 report_3;
+} __attribute__ ((packed));
+
+#define NUM_OF_RSSI_SNR_TRIGGERS 8
+
+struct event_mailbox {
+ u32 events_vector;
+ u32 events_mask;
+ u32 reserved_1;
+ u32 reserved_2;
+
+ u8 dbg_event_id;
+ u8 num_relevant_params;
+ u16 reserved_3;
+ u32 event_report_p1;
+ u32 event_report_p2;
+ u32 event_report_p3;
+
+ u8 number_of_scan_results;
+ u8 scan_tag;
+ u8 reserved_4[2];
+ u32 compl_scheduled_scan_status;
+
+ u16 scheduled_scan_attended_channels;
+ u8 soft_gemini_sense_info;
+ u8 soft_gemini_protective_info;
+ s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS];
+ u8 channel_switch_status;
+ u8 scheduled_scan_status;
+ u8 ps_status;
+
+ u8 reserved_5[29];
+} __attribute__ ((packed));
+
+int wl1271_event_unmask(struct wl1271 *wl);
+void wl1271_event_mbox_config(struct wl1271 *wl);
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
new file mode 100644
index 0000000..490df21
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -0,0 +1,397 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1271_init.h"
+#include "wl12xx_80211.h"
+#include "wl1271_acx.h"
+#include "wl1271_cmd.h"
+#include "wl1271_reg.h"
+
+static int wl1271_init_hwenc_config(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_feature_cfg(wl);
+ if (ret < 0) {
+ wl1271_warning("couldn't set feature config");
+ return ret;
+ }
+
+ ret = wl1271_cmd_set_default_wep_key(wl, wl->default_key);
+ if (ret < 0) {
+ wl1271_warning("couldn't set default key");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1271_init_templates_config(struct wl1271 *wl)
+{
+ int ret;
+
+ /* send empty templates for fw memory reservation */
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL,
+ sizeof(struct wl12xx_probe_req_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL,
+ sizeof(struct wl12xx_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, NULL,
+ sizeof(struct wl12xx_ps_poll_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, NULL,
+ sizeof
+ (struct wl12xx_qos_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE, NULL,
+ sizeof
+ (struct wl12xx_probe_resp_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, NULL,
+ sizeof
+ (struct wl12xx_beacon_template));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_rx_config(struct wl1271 *wl, u32 config, u32 filter)
+{
+ int ret;
+
+ ret = wl1271_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_rx_config(wl, config, filter);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_phy_config(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_pd_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_slot(wl, DEFAULT_SLOT_TIME);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_group_address_tbl(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_service_period_timeout(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_beacon_filter(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_beacon_filter_opt(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_beacon_filter_table(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_pta(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_sg_enable(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_acx_sg_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_energy_detection(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_cca_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_beacon_broadcast(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_bcn_dtim_options(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wl1271_init_general_parms(struct wl1271 *wl)
+{
+ struct wl1271_general_parms *gen_parms;
+ int ret;
+
+ gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+ if (!gen_parms)
+ return -ENOMEM;
+
+ gen_parms->id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+ gen_parms->ref_clk = REF_CLK_38_4_E;
+ /* FIXME: magic numbers */
+ gen_parms->settling_time = 5;
+ gen_parms->clk_valid_on_wakeup = 0;
+ gen_parms->dc2dcmode = 0;
+ gen_parms->single_dual_band = 0;
+ gen_parms->tx_bip_fem_autodetect = 1;
+ gen_parms->tx_bip_fem_manufacturer = 1;
+ gen_parms->settings = 1;
+
+ ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
+ if (ret < 0) {
+ wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+ return ret;
+ }
+
+ kfree(gen_parms);
+ return 0;
+}
+
+static int wl1271_init_radio_parms(struct wl1271 *wl)
+{
+ /*
+ * FIXME: All these magic numbers should be moved to some place where
+ * they can be configured (separate file?)
+ */
+
+ struct wl1271_radio_parms *radio_parms;
+ int ret;
+ u8 compensation[] = { 0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8, 0xfc, 0x00,
+ 0x08, 0x10, 0xf0, 0xf8, 0x00, 0x0a, 0x14 };
+
+ u8 tx_rate_limits_normal[] = { 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 };
+ u8 tx_rate_limits_degraded[] = { 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 };
+
+ u8 tx_channel_limits_11b[] = { 0x22, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x22, 0x50,
+ 0x22, 0x50 };
+
+ u8 tx_channel_limits_ofdm[] = { 0x20, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x50, 0x50,
+ 0x50, 0x50, 0x20, 0x50,
+ 0x20, 0x50 };
+
+ u8 tx_pdv_rate_offsets[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+ u8 tx_ibias[] = { 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 };
+
+ radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+ if (!radio_parms)
+ return -ENOMEM;
+
+ radio_parms->id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+ /* Static radio parameters */
+ radio_parms->rx_trace_loss = 10;
+ radio_parms->tx_trace_loss = 10;
+ memcpy(radio_parms->rx_rssi_and_proc_compens, compensation,
+ sizeof(compensation));
+
+ /* We don't set the 5GHz -- N/A */
+
+ /* Dynamic radio parameters */
+ radio_parms->tx_ref_pd_voltage = cpu_to_le16(0x24e);
+ radio_parms->tx_ref_power = 0x78;
+ radio_parms->tx_offset_db = 0x0;
+
+ memcpy(radio_parms->tx_rate_limits_normal, tx_rate_limits_normal,
+ sizeof(tx_rate_limits_normal));
+ memcpy(radio_parms->tx_rate_limits_degraded, tx_rate_limits_degraded,
+ sizeof(tx_rate_limits_degraded));
+
+ memcpy(radio_parms->tx_channel_limits_11b, tx_channel_limits_11b,
+ sizeof(tx_channel_limits_11b));
+ memcpy(radio_parms->tx_channel_limits_ofdm, tx_channel_limits_ofdm,
+ sizeof(tx_channel_limits_ofdm));
+ memcpy(radio_parms->tx_pdv_rate_offsets, tx_pdv_rate_offsets,
+ sizeof(tx_pdv_rate_offsets));
+ memcpy(radio_parms->tx_ibias, tx_ibias,
+ sizeof(tx_ibias));
+
+ radio_parms->rx_fem_insertion_loss = 0x14;
+
+ ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+ if (ret < 0)
+ wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+ kfree(radio_parms);
+ return ret;
+}
+
+int wl1271_hw_init(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_init_general_parms(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_init_radio_parms(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Template settings */
+ ret = wl1271_init_templates_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default memory configuration */
+ ret = wl1271_acx_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* RX config */
+ ret = wl1271_init_rx_config(wl,
+ RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+ RX_FILTER_OPTION_DEF);
+ /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+ RX_FILTER_OPTION_FILTER_ALL); */
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* PHY layer config */
+ ret = wl1271_init_phy_config(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Beacon filtering */
+ ret = wl1271_init_beacon_filter(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Configure TX patch complete interrupt behavior */
+ ret = wl1271_acx_tx_config_options(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* RX complete interrupt pacing */
+ ret = wl1271_acx_init_rx_interrupt(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Bluetooth WLAN coexistence */
+ ret = wl1271_init_pta(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Energy detection */
+ ret = wl1271_init_energy_detection(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Beacons and boradcast settings */
+ ret = wl1271_init_beacon_broadcast(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Default fragmentation threshold */
+ ret = wl1271_acx_frag_threshold(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Default TID configuration */
+ ret = wl1271_acx_tid_cfg(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Default AC configuration */
+ ret = wl1271_acx_ac_cfg(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Configure TX rate classes */
+ ret = wl1271_acx_rate_policies(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Enable data path */
+ ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Configure for ELP power saving */
+ ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* Configure HW encryption */
+ ret = wl1271_init_hwenc_config(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ return 0;
+
+ out_free_memmap:
+ kfree(wl->target_mem_map);
+
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/wl1271_init.h
new file mode 100644
index 0000000..bd8ff0f
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_init.h
@@ -0,0 +1,115 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_INIT_H__
+#define __WL1271_INIT_H__
+
+#include "wl1271.h"
+
+int wl1271_hw_init_power_auth(struct wl1271 *wl);
+int wl1271_hw_init(struct wl1271 *wl);
+
+/* These are not really a TEST_CMD, but the ref driver uses them as such */
+#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19
+#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
+
+struct wl1271_general_parms {
+ u8 id;
+ u8 padding[3];
+
+ u8 ref_clk;
+ u8 settling_time;
+ u8 clk_valid_on_wakeup;
+ u8 dc2dcmode;
+ u8 single_dual_band;
+
+ u8 tx_bip_fem_autodetect;
+ u8 tx_bip_fem_manufacturer;
+ u8 settings;
+} __attribute__ ((packed));
+
+enum ref_clk_enum {
+ REF_CLK_19_2_E,
+ REF_CLK_26_E,
+ REF_CLK_38_4_E,
+ REF_CLK_52_E
+};
+
+#define RSSI_AND_PROCESS_COMPENSATION_SIZE 15
+#define NUMBER_OF_SUB_BANDS_5 7
+#define NUMBER_OF_RATE_GROUPS 6
+#define NUMBER_OF_CHANNELS_2_4 14
+#define NUMBER_OF_CHANNELS_5 35
+
+struct wl1271_radio_parms {
+ u8 id;
+ u8 padding[3];
+
+ /* Static radio parameters */
+ /* 2.4GHz */
+ u8 rx_trace_loss;
+ u8 tx_trace_loss;
+ s8 rx_rssi_and_proc_compens[RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+ /* 5GHz */
+ u8 rx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
+ u8 tx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
+ s8 rx_rssi_and_proc_compens_5[RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+ /* Dynamic radio parameters */
+ /* 2.4GHz */
+ s16 tx_ref_pd_voltage;
+ s8 tx_ref_power;
+ s8 tx_offset_db;
+
+ s8 tx_rate_limits_normal[NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded[NUMBER_OF_RATE_GROUPS];
+
+ s8 tx_channel_limits_11b[NUMBER_OF_CHANNELS_2_4];
+ s8 tx_channel_limits_ofdm[NUMBER_OF_CHANNELS_2_4];
+ s8 tx_pdv_rate_offsets[NUMBER_OF_RATE_GROUPS];
+
+ u8 tx_ibias[NUMBER_OF_RATE_GROUPS];
+ u8 rx_fem_insertion_loss;
+
+ u8 padding2;
+
+ /* 5GHz */
+ s16 tx_ref_pd_voltage_5[NUMBER_OF_SUB_BANDS_5];
+ s8 tx_ref_power_5[NUMBER_OF_SUB_BANDS_5];
+ s8 tx_offset_db_5[NUMBER_OF_SUB_BANDS_5];
+
+ s8 tx_rate_limits_normal_5[NUMBER_OF_RATE_GROUPS];
+ s8 tx_rate_limits_degraded_5[NUMBER_OF_RATE_GROUPS];
+
+ s8 tx_channel_limits_ofdm_5[NUMBER_OF_CHANNELS_5];
+ s8 tx_pdv_rate_offsets_5[NUMBER_OF_RATE_GROUPS];
+
+ /* FIXME: this is inconsistent with the types for 2.4GHz */
+ s8 tx_ibias_5[NUMBER_OF_RATE_GROUPS];
+ s8 rx_fem_insertion_loss_5[NUMBER_OF_SUB_BANDS_5];
+
+ u8 padding3[2];
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
new file mode 100644
index 0000000..d9169b4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -0,0 +1,1394 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/spi/wl12xx.h>
+
+#include "wl1271.h"
+#include "wl12xx_80211.h"
+#include "wl1271_reg.h"
+#include "wl1271_spi.h"
+#include "wl1271_event.h"
+#include "wl1271_tx.h"
+#include "wl1271_rx.h"
+#include "wl1271_ps.h"
+#include "wl1271_init.h"
+#include "wl1271_debugfs.h"
+#include "wl1271_cmd.h"
+#include "wl1271_boot.h"
+
+static int wl1271_plt_init(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl1271_acx_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void wl1271_disable_interrupts(struct wl1271 *wl)
+{
+ disable_irq(wl->irq);
+}
+
+static void wl1271_power_off(struct wl1271 *wl)
+{
+ wl->set_power(false);
+}
+
+static void wl1271_power_on(struct wl1271 *wl)
+{
+ wl->set_power(true);
+}
+
+static void wl1271_fw_status(struct wl1271 *wl, struct wl1271_fw_status *status)
+{
+ u32 total = 0;
+ int i;
+
+ /*
+ * FIXME: Reading the FW status directly from the registers seems to
+ * be the right thing to do, but it doesn't work. And in the
+ * reference driver, there is a workaround called
+ * USE_SDIO_24M_WORKAROUND, which reads the status from memory
+ * instead, so we do the same here.
+ */
+
+ wl1271_spi_mem_read(wl, STATUS_MEM_ADDRESS, status, sizeof(*status));
+
+ wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
+ "drv_rx_counter = %d, tx_results_counter = %d)",
+ status->intr,
+ status->fw_rx_counter,
+ status->drv_rx_counter,
+ status->tx_results_counter);
+
+ /* update number of available TX blocks */
+ for (i = 0; i < NUM_TX_QUEUES; i++) {
+ u32 cnt = status->tx_released_blks[i] - wl->tx_blocks_freed[i];
+ wl->tx_blocks_freed[i] = status->tx_released_blks[i];
+ wl->tx_blocks_available += cnt;
+ total += cnt;
+ }
+
+ /* if more blocks are available now, schedule some tx work */
+ if (total && !skb_queue_empty(&wl->tx_queue))
+ schedule_work(&wl->tx_work);
+
+ /* update the host-chipset time offset */
+ wl->time_offset = jiffies_to_usecs(jiffies) - status->fw_localtime;
+}
+
+#define WL1271_IRQ_MAX_LOOPS 10
+static void wl1271_irq_work(struct work_struct *work)
+{
+ u32 intr, ctr = WL1271_IRQ_MAX_LOOPS;
+ int ret;
+ struct wl1271 *wl =
+ container_of(work, struct wl1271, irq_work);
+
+ mutex_lock(&wl->mutex);
+
+ wl1271_debug(DEBUG_IRQ, "IRQ work");
+
+ if (wl->state == WL1271_STATE_OFF)
+ goto out;
+
+ ret = wl1271_ps_elp_wakeup(wl, true);
+ if (ret < 0)
+ goto out;
+
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+
+ intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+ if (!intr) {
+ wl1271_debug(DEBUG_IRQ, "Zero interrupt received.");
+ goto out_sleep;
+ }
+
+ intr &= WL1271_INTR_MASK;
+
+ do {
+ wl1271_fw_status(wl, wl->fw_status);
+
+
+ if (intr & (WL1271_ACX_INTR_EVENT_A |
+ WL1271_ACX_INTR_EVENT_B)) {
+ wl1271_debug(DEBUG_IRQ,
+ "WL1271_ACX_INTR_EVENT (0x%x)", intr);
+ if (intr & WL1271_ACX_INTR_EVENT_A)
+ wl1271_event_handle(wl, 0);
+ else
+ wl1271_event_handle(wl, 1);
+ }
+
+ if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
+ wl1271_debug(DEBUG_IRQ,
+ "WL1271_ACX_INTR_INIT_COMPLETE");
+
+ if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
+ wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
+
+ if (intr & WL1271_ACX_INTR_DATA) {
+ u8 tx_res_cnt = wl->fw_status->tx_results_counter -
+ wl->tx_results_count;
+
+ wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
+
+ /* check for tx results */
+ if (tx_res_cnt)
+ wl1271_tx_complete(wl, tx_res_cnt);
+
+ wl1271_rx(wl, wl->fw_status);
+ }
+
+ intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+ intr &= WL1271_INTR_MASK;
+ } while (intr && --ctr);
+
+out_sleep:
+ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+ WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static irqreturn_t wl1271_irq(int irq, void *cookie)
+{
+ struct wl1271 *wl;
+ unsigned long flags;
+
+ wl1271_debug(DEBUG_IRQ, "IRQ");
+
+ wl = cookie;
+
+ /* complete the ELP completion */
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ if (wl->elp_compl) {
+ complete(wl->elp_compl);
+ wl->elp_compl = NULL;
+ }
+
+ schedule_work(&wl->irq_work);
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static int wl1271_fetch_firmware(struct wl1271 *wl)
+{
+ const struct firmware *fw;
+ int ret;
+
+ ret = request_firmware(&fw, WL1271_FW_NAME, &wl->spi->dev);
+
+ if (ret < 0) {
+ wl1271_error("could not get firmware: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl1271_error("firmware size is not multiple of 32 bits: %zu",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->fw_len = fw->size;
+ wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+
+ if (!wl->fw) {
+ wl1271_error("could not allocate memory for the firmware");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->fw, fw->data, wl->fw_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static int wl1271_fetch_nvs(struct wl1271 *wl)
+{
+ const struct firmware *fw;
+ int ret;
+
+ ret = request_firmware(&fw, WL1271_NVS_NAME, &wl->spi->dev);
+
+ if (ret < 0) {
+ wl1271_error("could not get nvs file: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl1271_error("nvs size is not multiple of 32 bits: %zu",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->nvs_len = fw->size;
+ wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+
+ if (!wl->nvs) {
+ wl1271_error("could not allocate memory for the nvs file");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->nvs, fw->data, wl->nvs_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static void wl1271_fw_wakeup(struct wl1271 *wl)
+{
+ u32 elp_reg;
+
+ elp_reg = ELPCTRL_WAKE_UP;
+ wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+}
+
+static int wl1271_setup(struct wl1271 *wl)
+{
+ wl->fw_status = kmalloc(sizeof(*wl->fw_status), GFP_KERNEL);
+ if (!wl->fw_status)
+ return -ENOMEM;
+
+ wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL);
+ if (!wl->tx_res_if) {
+ kfree(wl->fw_status);
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&wl->irq_work, wl1271_irq_work);
+ INIT_WORK(&wl->tx_work, wl1271_tx_work);
+ return 0;
+}
+
+static int wl1271_chip_wakeup(struct wl1271 *wl)
+{
+ int ret = 0;
+
+ wl1271_power_on(wl);
+ msleep(WL1271_POWER_ON_SLEEP);
+ wl1271_spi_reset(wl);
+ wl1271_spi_init(wl);
+
+ /* We don't need a real memory partition here, because we only want
+ * to use the registers at this point. */
+ wl1271_set_partition(wl,
+ 0x00000000,
+ 0x00000000,
+ REGISTERS_BASE,
+ REGISTERS_DOWN_SIZE);
+
+ /* ELP module wake up */
+ wl1271_fw_wakeup(wl);
+
+ /* whal_FwCtrl_BootSm() */
+
+ /* 0. read chip id from CHIP_ID */
+ wl->chip.id = wl1271_reg_read32(wl, CHIP_ID_B);
+
+ /* 1. check if chip id is valid */
+
+ switch (wl->chip.id) {
+ case CHIP_ID_1271_PG10:
+ wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
+ wl->chip.id);
+
+ ret = wl1271_setup(wl);
+ if (ret < 0)
+ goto out;
+ break;
+ case CHIP_ID_1271_PG20:
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
+ wl->chip.id);
+
+ ret = wl1271_setup(wl);
+ if (ret < 0)
+ goto out;
+ break;
+ default:
+ wl1271_error("unsupported chip id: 0x%x", wl->chip.id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (wl->fw == NULL) {
+ ret = wl1271_fetch_firmware(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* No NVS from netlink, try to get it from the filesystem */
+ if (wl->nvs == NULL) {
+ ret = wl1271_fetch_nvs(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void wl1271_filter_work(struct work_struct *work)
+{
+ struct wl1271 *wl =
+ container_of(work, struct wl1271, filter_work);
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL1271_STATE_OFF)
+ goto out;
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ /* FIXME: replace the magic numbers with proper definitions */
+ ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ if (ret < 0)
+ goto out_sleep;
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+int wl1271_plt_start(struct wl1271 *wl)
+{
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ wl1271_notice("power up");
+
+ if (wl->state != WL1271_STATE_OFF) {
+ wl1271_error("cannot go into PLT state because not "
+ "in off state: %d", wl->state);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ wl->state = WL1271_STATE_PLT;
+
+ ret = wl1271_chip_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1271_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+
+ ret = wl1271_plt_init(wl);
+ if (ret < 0)
+ goto out;
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+int wl1271_plt_stop(struct wl1271 *wl)
+{
+ int ret = 0;
+
+ mutex_lock(&wl->mutex);
+
+ wl1271_notice("power down");
+
+ if (wl->state != WL1271_STATE_PLT) {
+ wl1271_error("cannot power down because not in PLT "
+ "state: %d", wl->state);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ wl1271_disable_interrupts(wl);
+ wl1271_power_off(wl);
+
+ wl->state = WL1271_STATE_OFF;
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+
+static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct wl1271 *wl = hw->priv;
+
+ skb_queue_tail(&wl->tx_queue, skb);
+
+ /*
+ * The chip specific setup must run before the first TX packet -
+ * before that, the tx_work will not be initialized!
+ */
+
+ schedule_work(&wl->tx_work);
+
+ /*
+ * The workqueue is slow to process the tx_queue and we need stop
+ * the queue here, otherwise the queue will get too long.
+ */
+ if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_MAX_LENGTH) {
+ ieee80211_stop_queues(wl->hw);
+
+ /*
+ * FIXME: this is racy, the variable is not properly
+ * protected. Maybe fix this by removing the stupid
+ * variable altogether and checking the real queue state?
+ */
+ wl->tx_queue_stopped = true;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int wl1271_op_start(struct ieee80211_hw *hw)
+{
+ struct wl1271 *wl = hw->priv;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 start");
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state != WL1271_STATE_OFF) {
+ wl1271_error("cannot start because not in off state: %d",
+ wl->state);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ret = wl1271_chip_wakeup(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1271_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1271_hw_init(wl);
+ if (ret < 0)
+ goto out;
+
+ wl->state = WL1271_STATE_ON;
+
+ wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
+
+out:
+ if (ret < 0)
+ wl1271_power_off(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static void wl1271_op_stop(struct ieee80211_hw *hw)
+{
+ struct wl1271 *wl = hw->priv;
+ int i;
+
+ wl1271_info("down");
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 stop");
+
+ mutex_lock(&wl->mutex);
+
+ WARN_ON(wl->state != WL1271_STATE_ON);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, true);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ wl->state = WL1271_STATE_OFF;
+
+ wl1271_disable_interrupts(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ cancel_work_sync(&wl->irq_work);
+ cancel_work_sync(&wl->tx_work);
+ cancel_work_sync(&wl->filter_work);
+
+ mutex_lock(&wl->mutex);
+
+ /* let's notify MAC80211 about the remaining pending TX frames */
+ wl1271_tx_flush(wl);
+ wl1271_power_off(wl);
+
+ memset(wl->bssid, 0, ETH_ALEN);
+ memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1);
+ wl->ssid_len = 0;
+ wl->listen_int = 1;
+ wl->bss_type = MAX_BSS_TYPE;
+
+ wl->rx_counter = 0;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
+ wl->tx_blocks_available = 0;
+ wl->tx_results_count = 0;
+ wl->tx_packets_count = 0;
+ wl->time_offset = 0;
+ wl->session_counter = 0;
+ for (i = 0; i < NUM_TX_QUEUES; i++)
+ wl->tx_blocks_freed[i] = 0;
+
+ wl1271_debugfs_reset(wl);
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1271_op_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct wl1271 *wl = hw->priv;
+ int ret = 0;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
+ conf->type, conf->mac_addr);
+
+ mutex_lock(&wl->mutex);
+
+ switch (conf->type) {
+ case NL80211_IFTYPE_STATION:
+ wl->bss_type = BSS_TYPE_STA_BSS;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ wl->bss_type = BSS_TYPE_IBSS;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* FIXME: what if conf->mac_addr changes? */
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
+}
+
+#if 0
+static int wl1271_op_config_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf)
+{
+ struct wl1271 *wl = hw->priv;
+ struct sk_buff *beacon;
+ DECLARE_MAC_BUF(mac);
+ int ret;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 config_interface bssid %s",
+ print_mac(mac, conf->bssid));
+ wl1271_dump_ascii(DEBUG_MAC80211, "ssid: ", conf->ssid,
+ conf->ssid_len);
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+
+ ret = wl1271_cmd_build_null_data(wl);
+ if (ret < 0)
+ goto out_sleep;
+
+ wl->ssid_len = conf->ssid_len;
+ if (wl->ssid_len)
+ memcpy(wl->ssid, conf->ssid, wl->ssid_len);
+
+ if (wl->bss_type != BSS_TYPE_IBSS) {
+ /* FIXME: replace the magic numbers with proper definitions */
+ ret = wl1271_cmd_join(wl, wl->bss_type, 5, 100, 1);
+ if (ret < 0)
+ goto out_sleep;
+ }
+
+ if (conf->changed & IEEE80211_IFCC_BEACON) {
+ beacon = ieee80211_beacon_get(hw, vif);
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
+ beacon->data, beacon->len);
+
+ if (ret < 0) {
+ dev_kfree_skb(beacon);
+ goto out_sleep;
+ }
+
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE,
+ beacon->data, beacon->len);
+
+ dev_kfree_skb(beacon);
+
+ if (ret < 0)
+ goto out_sleep;
+
+ /* FIXME: replace the magic numbers with proper definitions */
+ ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
+
+ if (ret < 0)
+ goto out_sleep;
+ }
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+#endif
+
+static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct wl1271 *wl = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int channel, ret = 0;
+
+ channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+ channel,
+ conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+ conf->power_level);
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ if (channel != wl->channel) {
+ u8 old_channel = wl->channel;
+ wl->channel = channel;
+
+ /* FIXME: use beacon interval provided by mac80211 */
+ ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ if (ret < 0) {
+ wl->channel = old_channel;
+ goto out_sleep;
+ }
+ }
+
+ ret = wl1271_cmd_build_null_data(wl);
+ if (ret < 0)
+ goto out_sleep;
+
+ if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+ wl1271_info("psm enabled");
+
+ wl->psm_requested = true;
+
+ /*
+ * We enter PSM only if we're already associated.
+ * If we're not, we'll enter it when joining an SSID,
+ * through the bss_info_changed() hook.
+ */
+ ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ } else if (!(conf->flags & IEEE80211_CONF_PS) &&
+ wl->psm_requested) {
+ wl1271_info("psm disabled");
+
+ wl->psm_requested = false;
+
+ if (wl->psm)
+ ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ }
+
+ if (conf->power_level != wl->power_level) {
+ ret = wl1271_acx_tx_power(wl, conf->power_level);
+ if (ret < 0)
+ goto out;
+
+ wl->power_level = conf->power_level;
+ }
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+#define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_FCSFAIL | \
+ FIF_BCN_PRBRESP_PROMISC | \
+ FIF_CONTROL | \
+ FIF_OTHER_BSS)
+
+static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed,
+ unsigned int *total,u64 multicast)
+{
+ struct wl1271 *wl = hw->priv;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+ *total &= WL1271_SUPPORTED_FILTERS;
+ changed &= WL1271_SUPPORTED_FILTERS;
+
+ if (changed == 0)
+ return;
+
+ /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+ wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
+
+ /*
+ * FIXME: workqueues need to be properly cancelled on stop(), for
+ * now let's just disable changing the filter settings. They will
+ * be updated any on config().
+ */
+ /* schedule_work(&wl->filter_work); */
+}
+
+static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key_conf)
+{
+ struct wl1271 *wl = hw->priv;
+ const u8 *addr;
+ int ret;
+ u8 key_type;
+
+ static const u8 bcast_addr[ETH_ALEN] =
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 set key");
+
+ addr = sta ? sta->addr : bcast_addr;
+
+ wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+ wl1271_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+ wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+ key_conf->alg, key_conf->keyidx,
+ key_conf->keylen, key_conf->flags);
+ wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen);
+
+ if (is_zero_ether_addr(addr)) {
+ /* We dont support TX only encryption */
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out_unlock;
+
+ switch (key_conf->alg) {
+ case ALG_WEP:
+ key_type = KEY_WEP;
+
+ key_conf->hw_key_idx = key_conf->keyidx;
+ break;
+ case ALG_TKIP:
+ key_type = KEY_TKIP;
+
+ key_conf->hw_key_idx = key_conf->keyidx;
+ break;
+ case ALG_CCMP:
+ key_type = KEY_AES;
+
+ key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ break;
+ default:
+ wl1271_error("Unknown key algo 0x%x", key_conf->alg);
+
+ ret = -EOPNOTSUPP;
+ goto out_sleep;
+ }
+
+ switch (cmd) {
+ case SET_KEY:
+ ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE,
+ key_conf->keyidx, key_type,
+ key_conf->keylen, key_conf->key,
+ addr);
+ if (ret < 0) {
+ wl1271_error("Could not add or replace key");
+ goto out_sleep;
+ }
+ break;
+
+ case DISABLE_KEY:
+ ret = wl1271_cmd_set_key(wl, KEY_REMOVE,
+ key_conf->keyidx, key_type,
+ key_conf->keylen, key_conf->key,
+ addr);
+ if (ret < 0) {
+ wl1271_error("Could not remove key");
+ goto out_sleep;
+ }
+ break;
+
+ default:
+ wl1271_error("Unsupported key cmd 0x%x", cmd);
+ ret = -EOPNOTSUPP;
+ goto out_sleep;
+
+ break;
+ }
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
+
+out:
+ return ret;
+}
+
+static int wl1271_op_hw_scan(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req)
+{
+ struct wl1271 *wl = hw->priv;
+ int ret;
+ u8 *ssid = NULL;
+ size_t ssid_len = 0;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+ if (req->n_ssids) {
+ ssid = req->ssids[0].ssid;
+ ssid_len = req->ssids[0].ssid_len;
+ }
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1271_cmd_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct wl1271 *wl = hw->priv;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ ret = wl1271_acx_rts_threshold(wl, (u16) value);
+ if (ret < 0)
+ wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret);
+
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changed)
+{
+ enum wl1271_cmd_ps_mode mode;
+ struct wl1271 *wl = hw->priv;
+ int ret;
+
+ wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+ mutex_lock(&wl->mutex);
+
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (bss_conf->assoc) {
+ wl->aid = bss_conf->aid;
+
+ ret = wl1271_cmd_build_ps_poll(wl, wl->aid);
+ if (ret < 0)
+ goto out_sleep;
+
+ ret = wl1271_acx_aid(wl, wl->aid);
+ if (ret < 0)
+ goto out_sleep;
+
+ /* If we want to go in PSM but we're not there yet */
+ if (wl->psm_requested && !wl->psm) {
+ mode = STATION_POWER_SAVE_MODE;
+ ret = wl1271_ps_set_mode(wl, mode);
+ if (ret < 0)
+ goto out_sleep;
+ }
+ }
+ }
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (bss_conf->use_short_slot)
+ ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT);
+ else
+ ret = wl1271_acx_slot(wl, SLOT_TIME_LONG);
+ if (ret < 0) {
+ wl1271_warning("Set slot time failed %d", ret);
+ goto out_sleep;
+ }
+ }
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ if (bss_conf->use_short_preamble)
+ wl1271_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+ else
+ wl1271_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+ }
+
+ if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+ if (bss_conf->use_cts_prot)
+ ret = wl1271_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+ else
+ ret = wl1271_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+ if (ret < 0) {
+ wl1271_warning("Set ctsprotect failed %d", ret);
+ goto out_sleep;
+ }
+ }
+
+out_sleep:
+ wl1271_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl1271_rates[] = {
+ { .bitrate = 10,
+ .hw_value = 0x1,
+ .hw_value_short = 0x1, },
+ { .bitrate = 20,
+ .hw_value = 0x2,
+ .hw_value_short = 0x2,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = 0x4,
+ .hw_value_short = 0x4,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = 0x20,
+ .hw_value_short = 0x20,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = 0x8,
+ .hw_value_short = 0x8, },
+ { .bitrate = 90,
+ .hw_value = 0x10,
+ .hw_value_short = 0x10, },
+ { .bitrate = 120,
+ .hw_value = 0x40,
+ .hw_value_short = 0x40, },
+ { .bitrate = 180,
+ .hw_value = 0x80,
+ .hw_value_short = 0x80, },
+ { .bitrate = 240,
+ .hw_value = 0x200,
+ .hw_value_short = 0x200, },
+ { .bitrate = 360,
+ .hw_value = 0x400,
+ .hw_value_short = 0x400, },
+ { .bitrate = 480,
+ .hw_value = 0x800,
+ .hw_value_short = 0x800, },
+ { .bitrate = 540,
+ .hw_value = 0x1000,
+ .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl1271_channels[] = {
+ { .hw_value = 1, .center_freq = 2412},
+ { .hw_value = 2, .center_freq = 2417},
+ { .hw_value = 3, .center_freq = 2422},
+ { .hw_value = 4, .center_freq = 2427},
+ { .hw_value = 5, .center_freq = 2432},
+ { .hw_value = 6, .center_freq = 2437},
+ { .hw_value = 7, .center_freq = 2442},
+ { .hw_value = 8, .center_freq = 2447},
+ { .hw_value = 9, .center_freq = 2452},
+ { .hw_value = 10, .center_freq = 2457},
+ { .hw_value = 11, .center_freq = 2462},
+ { .hw_value = 12, .center_freq = 2467},
+ { .hw_value = 13, .center_freq = 2472},
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl1271_band_2ghz = {
+ .channels = wl1271_channels,
+ .n_channels = ARRAY_SIZE(wl1271_channels),
+ .bitrates = wl1271_rates,
+ .n_bitrates = ARRAY_SIZE(wl1271_rates),
+};
+
+static const struct ieee80211_ops wl1271_ops = {
+ .start = wl1271_op_start,
+ .stop = wl1271_op_stop,
+ .add_interface = wl1271_op_add_interface,
+ .remove_interface = wl1271_op_remove_interface,
+ .config = wl1271_op_config,
+/* .config_interface = wl1271_op_config_interface, */
+ .configure_filter = wl1271_op_configure_filter,
+ .tx = wl1271_op_tx,
+ .set_key = wl1271_op_set_key,
+ .hw_scan = wl1271_op_hw_scan,
+ .bss_info_changed = wl1271_op_bss_info_changed,
+ .set_rts_threshold = wl1271_op_set_rts_threshold,
+};
+
+static int wl1271_register_hw(struct wl1271 *wl)
+{
+ int ret;
+
+ if (wl->mac80211_registered)
+ return 0;
+
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+ ret = ieee80211_register_hw(wl->hw);
+ if (ret < 0) {
+ wl1271_error("unable to register mac80211 hw: %d", ret);
+ return ret;
+ }
+
+ wl->mac80211_registered = true;
+
+ wl1271_notice("loaded");
+
+ return 0;
+}
+
+static int wl1271_init_ieee80211(struct wl1271 *wl)
+{
+ /*
+ * The tx descriptor buffer and the TKIP space.
+ *
+ * FIXME: add correct 1271 descriptor size
+ */
+ wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE;
+
+ /* unit us */
+ /* FIXME: find a proper value */
+ wl->hw->channel_change_time = 10000;
+
+ wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->max_scan_ssids = 1;
+ wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
+
+ SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
+
+ return 0;
+}
+
+static void wl1271_device_release(struct device *dev)
+{
+
+}
+
+static struct platform_device wl1271_device = {
+ .name = "wl1271",
+ .id = -1,
+
+ /* device model insists to have a release function */
+ .dev = {
+ .release = wl1271_device_release,
+ },
+};
+
+#define WL1271_DEFAULT_CHANNEL 0
+static int __devinit wl1271_probe(struct spi_device *spi)
+{
+ struct wl12xx_platform_data *pdata;
+ struct ieee80211_hw *hw;
+ struct wl1271 *wl;
+ int ret, i;
+ static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ wl1271_error("no platform data");
+ return -ENODEV;
+ }
+
+ hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
+ if (!hw) {
+ wl1271_error("could not alloc ieee80211_hw");
+ return -ENOMEM;
+ }
+
+ wl = hw->priv;
+ memset(wl, 0, sizeof(*wl));
+
+ wl->hw = hw;
+ dev_set_drvdata(&spi->dev, wl);
+ wl->spi = spi;
+
+ skb_queue_head_init(&wl->tx_queue);
+
+ INIT_WORK(&wl->filter_work, wl1271_filter_work);
+ wl->channel = WL1271_DEFAULT_CHANNEL;
+ wl->scanning = false;
+ wl->default_key = 0;
+ wl->listen_int = 1;
+ wl->rx_counter = 0;
+ wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->psm_requested = false;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
+
+ /* We use the default power on sleep time until we know which chip
+ * we're using */
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ wl->tx_frames[i] = NULL;
+
+ spin_lock_init(&wl->wl_lock);
+
+ /*
+ * In case our MAC address is not correctly set,
+ * we use a random but Nokia MAC.
+ */
+ memcpy(wl->mac_addr, nokia_oui, 3);
+ get_random_bytes(wl->mac_addr + 3, 3);
+
+ wl->state = WL1271_STATE_OFF;
+ mutex_init(&wl->mutex);
+
+ wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
+ if (!wl->rx_descriptor) {
+ wl1271_error("could not allocate memory for rx descriptor");
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ /* This is the only SPI value that we need to set here, the rest
+ * comes from the board-peripherals file */
+ spi->bits_per_word = 32;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ wl1271_error("spi_setup failed");
+ goto out_free;
+ }
+
+ wl->set_power = pdata->set_power;
+ if (!wl->set_power) {
+ wl1271_error("set power function missing in platform data");
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ wl->irq = spi->irq;
+ if (wl->irq < 0) {
+ wl1271_error("irq missing in platform data");
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl);
+ if (ret < 0) {
+ wl1271_error("request_irq() failed: %d", ret);
+ goto out_free;
+ }
+
+ set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+ disable_irq(wl->irq);
+
+ ret = platform_device_register(&wl1271_device);
+ if (ret) {
+ wl1271_error("couldn't register platform device");
+ goto out_irq;
+ }
+ dev_set_drvdata(&wl1271_device.dev, wl);
+
+ ret = wl1271_init_ieee80211(wl);
+ if (ret)
+ goto out_platform;
+
+ ret = wl1271_register_hw(wl);
+ if (ret)
+ goto out_platform;
+
+ wl1271_debugfs_init(wl);
+
+ wl1271_notice("initialized");
+
+ return 0;
+
+ out_platform:
+ platform_device_unregister(&wl1271_device);
+
+ out_irq:
+ free_irq(wl->irq, wl);
+
+ out_free:
+ kfree(wl->rx_descriptor);
+ wl->rx_descriptor = NULL;
+
+ ieee80211_free_hw(hw);
+
+ return ret;
+}
+
+static int __devexit wl1271_remove(struct spi_device *spi)
+{
+ struct wl1271 *wl = dev_get_drvdata(&spi->dev);
+
+ ieee80211_unregister_hw(wl->hw);
+
+ wl1271_debugfs_exit(wl);
+ platform_device_unregister(&wl1271_device);
+ free_irq(wl->irq, wl);
+ kfree(wl->target_mem_map);
+ kfree(wl->fw);
+ wl->fw = NULL;
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+
+ kfree(wl->rx_descriptor);
+ wl->rx_descriptor = NULL;
+
+ kfree(wl->fw_status);
+ kfree(wl->tx_res_if);
+
+ ieee80211_free_hw(wl->hw);
+
+ return 0;
+}
+
+
+static struct spi_driver wl1271_spi_driver = {
+ .driver = {
+ .name = "wl1271",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = wl1271_probe,
+ .remove = __devexit_p(wl1271_remove),
+};
+
+static int __init wl1271_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&wl1271_spi_driver);
+ if (ret < 0) {
+ wl1271_error("failed to register spi driver: %d", ret);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit wl1271_exit(void)
+{
+ spi_unregister_driver(&wl1271_spi_driver);
+
+ wl1271_notice("unloaded");
+}
+
+module_init(wl1271_init);
+module_exit(wl1271_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
new file mode 100644
index 0000000..1dc74b0
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -0,0 +1,142 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1271_reg.h"
+#include "wl1271_ps.h"
+#include "wl1271_spi.h"
+
+#define WL1271_WAKEUP_TIMEOUT 500
+
+/* Routines to toggle sleep mode while in ELP */
+void wl1271_ps_elp_sleep(struct wl1271 *wl)
+{
+ /*
+ * FIXME: due to a problem in the firmware (causing a firmware
+ * crash), ELP entry is prevented below. Remove the "true" to
+ * re-enable ELP entry.
+ */
+ if (true || wl->elp || !wl->psm)
+ return;
+
+ /*
+ * Go to ELP unless there is work already pending - pending work
+ * will immediately wakeup the chipset anyway.
+ */
+ if (!work_pending(&wl->irq_work) && !work_pending(&wl->tx_work)) {
+ wl1271_debug(DEBUG_PSM, "chip to elp");
+ wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+ wl->elp = true;
+ }
+}
+
+int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake)
+{
+ DECLARE_COMPLETION_ONSTACK(compl);
+ unsigned long flags;
+ int ret;
+ u32 start_time = jiffies;
+ bool pending = false;
+
+ if (!wl->elp)
+ return 0;
+
+ wl1271_debug(DEBUG_PSM, "waking up chip from elp");
+
+ /*
+ * The spinlock is required here to synchronize both the work and
+ * the completion variable in one entity.
+ */
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ if (work_pending(&wl->irq_work) || chip_awake)
+ pending = true;
+ else
+ wl->elp_compl = &compl;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+ if (!pending) {
+ ret = wait_for_completion_timeout(
+ &compl, msecs_to_jiffies(WL1271_WAKEUP_TIMEOUT));
+ if (ret == 0) {
+ wl1271_error("ELP wakeup timeout!");
+ ret = -ETIMEDOUT;
+ goto err;
+ } else if (ret < 0) {
+ wl1271_error("ELP wakeup completion error.");
+ goto err;
+ }
+ }
+
+ wl->elp = false;
+
+ wl1271_debug(DEBUG_PSM, "wakeup time: %u ms",
+ jiffies_to_msecs(jiffies - start_time));
+ goto out;
+
+err:
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ wl->elp_compl = NULL;
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+ return ret;
+
+out:
+ return 0;
+}
+
+int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode)
+{
+ int ret;
+
+ switch (mode) {
+ case STATION_POWER_SAVE_MODE:
+ wl1271_debug(DEBUG_PSM, "entering psm");
+ ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ wl1271_ps_elp_sleep(wl);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 1;
+ break;
+ case STATION_ACTIVE_MODE:
+ default:
+ wl1271_debug(DEBUG_PSM, "leaving psm");
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 0;
+ break;
+ }
+
+ return ret;
+}
+
+
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.h b/drivers/net/wireless/wl12xx/wl1271_ps.h
new file mode 100644
index 0000000..de2bd3c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.h
@@ -0,0 +1,35 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_PS_H__
+#define __WL1271_PS_H__
+
+#include "wl1271.h"
+#include "wl1271_acx.h"
+
+int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode);
+void wl1271_ps_elp_sleep(struct wl1271 *wl);
+int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake);
+
+
+#endif /* __WL1271_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h
new file mode 100644
index 0000000..f8ed4a4
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_reg.h
@@ -0,0 +1,758 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE 0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC
+#define STATUS_MEM_ADDRESS 0x40400
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP 0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
+#define ELPCTRL_SLEEP 0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY 0x2
+
+/*===============================================
+ Host Software Reset - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 SOFT_RESET Soft Reset - When this bit is set,
+ it holds the Wlan hardware in a soft reset state.
+ This reset disables all MAC and baseband processor
+ clocks except the CardBus/PCI interface clock.
+ It also initializes all MAC state machines except
+ the host interface. It does not reload the
+ contents of the EEPROM. When this bit is cleared
+ (not self-clearing), the Wlan hardware
+ exits the software reset state.
+===============================================*/
+#define ACX_REG_SLV_SOFT_RESET (REGISTERS_BASE + 0x0000)
+
+#define WL1271_SLV_REG_DATA (REGISTERS_BASE + 0x0008)
+#define WL1271_SLV_REG_ADATA (REGISTERS_BASE + 0x000c)
+#define WL1271_SLV_MEM_DATA (REGISTERS_BASE + 0x0018)
+/*
+ * Interrupt registers.
+ * 64 bit interrupt sources registers ws ced.
+ * sme interupts were removed and new ones were added.
+ * Order was changed.
+ */
+#define FIQ_MASK (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_L (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_H (REGISTERS_BASE + 0x0404)
+#define FIQ_MASK_SET (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_L (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_H (REGISTERS_BASE + 0x040C)
+#define FIQ_MASK_CLR (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_L (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_H (REGISTERS_BASE + 0x0414)
+#define IRQ_MASK (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_L (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_H (REGISTERS_BASE + 0x041C)
+#define IRQ_MASK_SET (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_L (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_H (REGISTERS_BASE + 0x0424)
+#define IRQ_MASK_CLR (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_L (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_H (REGISTERS_BASE + 0x042C)
+#define ECPU_MASK (REGISTERS_BASE + 0x0448)
+#define FIQ_STS_L (REGISTERS_BASE + 0x044C)
+#define FIQ_STS_H (REGISTERS_BASE + 0x0450)
+#define IRQ_STS_L (REGISTERS_BASE + 0x0454)
+#define IRQ_STS_H (REGISTERS_BASE + 0x0458)
+#define INT_STS_ND (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_L (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_H (REGISTERS_BASE + 0x0468)
+#define INT_STS_CLR (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_L (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_H (REGISTERS_BASE + 0x04B8)
+#define INT_ACK (REGISTERS_BASE + 0x046C)
+#define INT_ACK_L (REGISTERS_BASE + 0x046C)
+#define INT_ACK_H (REGISTERS_BASE + 0x0470)
+#define INT_TRIG (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_L (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_H (REGISTERS_BASE + 0x0478)
+#define HOST_STS_L (REGISTERS_BASE + 0x045C)
+#define HOST_STS_H (REGISTERS_BASE + 0x0460)
+#define HOST_MASK (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_L (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_H (REGISTERS_BASE + 0x0434)
+#define HOST_MASK_SET (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_L (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_H (REGISTERS_BASE + 0x043C)
+#define HOST_MASK_CLR (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_L (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_H (REGISTERS_BASE + 0x0444)
+
+#define ACX_REG_INTERRUPT_TRIG (REGISTERS_BASE + 0x0474)
+#define ACX_REG_INTERRUPT_TRIG_H (REGISTERS_BASE + 0x0478)
+
+/* Host Interrupts*/
+#define HINT_MASK (REGISTERS_BASE + 0x0494)
+#define HINT_MASK_SET (REGISTERS_BASE + 0x0498)
+#define HINT_MASK_CLR (REGISTERS_BASE + 0x049C)
+#define HINT_STS_ND_MASKED (REGISTERS_BASE + 0x04A0)
+/*1150 spec calls this HINT_STS_RAW*/
+#define HINT_STS_ND (REGISTERS_BASE + 0x04B0)
+#define HINT_STS_CLR (REGISTERS_BASE + 0x04A4)
+#define HINT_ACK (REGISTERS_BASE + 0x04A8)
+#define HINT_TRIG (REGISTERS_BASE + 0x04AC)
+
+/*=============================================
+ Host Interrupt Mask Register - 32bit (RW)
+ ------------------------------------------
+ Setting a bit in this register masks the
+ corresponding interrupt to the host.
+ 0 - RX0 - Rx first dubble buffer Data Interrupt
+ 1 - TXD - Tx Data Interrupt
+ 2 - TXXFR - Tx Transfer Interrupt
+ 3 - RX1 - Rx second dubble buffer Data Interrupt
+ 4 - RXXFR - Rx Transfer Interrupt
+ 5 - EVENT_A - Event Mailbox interrupt
+ 6 - EVENT_B - Event Mailbox interrupt
+ 7 - WNONHST - Wake On Host Interrupt
+ 8 - TRACE_A - Debug Trace interrupt
+ 9 - TRACE_B - Debug Trace interrupt
+ 10 - CDCMP - Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP - Initialization Complete Interrupt
+ 16 - SG SE - Soft Gemini - Sense enable interrupt
+ 17 - SG SD - Soft Gemini - Sense disable interrupt
+ 18 - -
+ 19 - -
+ 20 - -
+ 21- -
+ Default: 0x0001
+*==============================================*/
+#define ACX_REG_INTERRUPT_MASK (REGISTERS_BASE + 0x04DC)
+
+/*=============================================
+ Host Interrupt Mask Set 16bit, (Write only)
+ ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+#define ACX_REG_HINT_MASK_SET (REGISTERS_BASE + 0x04E0)
+
+/*=============================================
+ Host Interrupt Mask Clear 16bit,(Write only)
+ ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+#define ACX_REG_HINT_MASK_CLR (REGISTERS_BASE + 0x04E4)
+
+/*=============================================
+ Host Interrupt Status Nondestructive Read
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+#define ACX_REG_INTERRUPT_NO_CLEAR (REGISTERS_BASE + 0x04E8)
+
+/*=============================================
+ Host Interrupt Status Clear on Read Register
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+#define ACX_REG_INTERRUPT_CLEAR (REGISTERS_BASE + 0x04F8)
+
+/*=============================================
+ Host Interrupt Acknowledge Register
+ 16bit,(Write only)
+ ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+#define ACX_REG_INTERRUPT_ACK (REGISTERS_BASE + 0x04F0)
+
+#define RX_DRIVER_DUMMY_WRITE_ADDRESS (REGISTERS_BASE + 0x0534)
+#define RX_DRIVER_COUNTER_ADDRESS (REGISTERS_BASE + 0x0538)
+
+/* Device Configuration registers*/
+#define SOR_CFG (REGISTERS_BASE + 0x0800)
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+#define ACX_REG_ECPU_CONTROL (REGISTERS_BASE + 0x0804)
+
+#define HI_CFG (REGISTERS_BASE + 0x0808)
+
+/*===============================================
+ EEPROM Burst Read Start - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 ACX_EE_START - EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+#define ACX_REG_EE_START (REGISTERS_BASE + 0x080C)
+
+#define OCP_POR_CTR (REGISTERS_BASE + 0x09B4)
+#define OCP_DATA_WRITE (REGISTERS_BASE + 0x09B8)
+#define OCP_DATA_READ (REGISTERS_BASE + 0x09BC)
+#define OCP_CMD (REGISTERS_BASE + 0x09C0)
+
+#define WL1271_HOST_WR_ACCESS (REGISTERS_BASE + 0x09F8)
+
+#define CHIP_ID_B (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1271_PG10 (0x4030101)
+#define CHIP_ID_1271_PG20 (0x4030111)
+
+#define ENABLE (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
+#define ELP_CMD (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0 (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1 (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2 (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3 (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4 (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5 (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6 (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7 (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8 (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9 (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1 (REGISTERS_BASE + 0x0994)
+#define SPARE_A2 (REGISTERS_BASE + 0x0998)
+#define SPARE_A3 (REGISTERS_BASE + 0x099C)
+#define SPARE_A4 (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5 (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6 (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7 (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8 (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1 (REGISTERS_BASE + 0x5420)
+#define SPARE_B2 (REGISTERS_BASE + 0x5424)
+#define SPARE_B3 (REGISTERS_BASE + 0x5428)
+#define SPARE_B4 (REGISTERS_BASE + 0x542C)
+#define SPARE_B5 (REGISTERS_BASE + 0x5430)
+#define SPARE_B6 (REGISTERS_BASE + 0x5434)
+#define SPARE_B7 (REGISTERS_BASE + 0x5438)
+#define SPARE_B8 (REGISTERS_BASE + 0x543C)
+
+#define PLL_PARAMETERS (REGISTERS_BASE + 0x6040)
+#define WU_COUNTER_PAUSE (REGISTERS_BASE + 0x6008)
+#define WELP_ARM_COMMAND (REGISTERS_BASE + 0x6100)
+#define DRPW_SCRATCH_START (DRPW_BASE + 0x002C)
+
+
+#define ACX_SLV_SOFT_RESET_BIT BIT(1)
+#define ACX_REG_EEPROM_START_BIT BIT(1)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+ Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0)
+
+/*===============================================
+ Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR (SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX (ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG (RX_CFG)
+#define REG_RX_FILTER (RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS 0x2000
+#define RX_CFG_TSF 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+ | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+ | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+ | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+ | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+ | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+ | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+ Phy regs
+ ===============================================*/
+#define ACX_PHY_ADDR_REG SBB_ADDR
+#define ACX_PHY_DATA_REG SBB_DATA
+#define ACX_PHY_CTRL_REG SBB_CTL
+#define ACX_PHY_REG_WR_MASK 0x00000001ul
+#define ACX_PHY_REG_RD_MASK 0x00000002ul
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE - EEPROM Write Request - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define ACX_EE_CTL_REG EE_CTL
+#define EE_WRITE 0x00000001ul
+#define EE_READ 0x00000002ul
+
+/*===============================================
+ EEPROM Address - 32bit RW
+ ------------------------------------------
+ This register specifies the address
+ within the EEPROM from/to which to read/write data.
+ ===============================================*/
+#define ACX_EE_ADDR_REG EE_ADDR
+
+/*===============================================
+ EEPROM Data - 32bit RW
+ ------------------------------------------
+ This register either holds the read 8 bits of
+ data from the EEPROM or the write data
+ to be written to the EEPROM.
+ ===============================================*/
+#define ACX_EE_DATA_REG EE_DATA
+
+/*===============================================
+ EEPROM Base Address - 32bit RW
+ ------------------------------------------
+ This register holds the upper nine bits
+ [23:15] of the 24-bit Wlan hardware memory
+ address for burst reads from EEPROM accesses.
+ The EEPROM provides the lower 15 bits of this address.
+ The MSB of the address from the EEPROM is ignored.
+ ===============================================*/
+#define ACX_EE_CFG EE_CFG
+
+/*===============================================
+ GPIO Output Values -32bit, RW
+ ------------------------------------------
+ [31:16] Reserved
+ [15: 0] Specify the output values (at the output driver inputs) for
+ GPIO[15:0], respectively.
+ ===============================================*/
+#define ACX_GPIO_OUT_REG GPIO_OUT
+#define ACX_MAX_GPIO_LINES 15
+
+/*===============================================
+ Contention window -32bit, RW
+ ------------------------------------------
+ [31:26] Reserved
+ [25:16] Max (0x3ff)
+ [15:07] Reserved
+ [06:00] Current contention window value - default is 0x1F
+ ===============================================*/
+#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK 0x0000007f
+#define ACX_CONT_WIND_MAX 0x03ff0000
+
+/*
+ * Indirect slave register/memory registers
+ * ----------------------------------------
+ */
+#define HW_SLAVE_REG_ADDR_REG 0x00000004
+#define HW_SLAVE_REG_DATA_REG 0x00000008
+#define HW_SLAVE_REG_CTRL_REG 0x0000000c
+
+#define SLAVE_AUTO_INC 0x00010000
+#define SLAVE_NO_AUTO_INC 0x00000000
+#define SLAVE_HOST_LITTLE_ENDIAN 0x00000000
+
+#define HW_SLAVE_MEM_ADDR_REG SLV_MEM_ADDR
+#define HW_SLAVE_MEM_DATA_REG SLV_MEM_DATA
+#define HW_SLAVE_MEM_CTRL_REG SLV_MEM_CTL
+#define HW_SLAVE_MEM_ENDIAN_REG SLV_END_CTL
+
+#define HW_FUNC_EVENT_INT_EN 0x8000
+#define HW_FUNC_EVENT_MASK_REG 0x00000034
+
+#define ACX_MAC_TIMESTAMP_REG (MAC_TIMESTAMP)
+
+/*===============================================
+ HI_CFG Interface Configuration Register Values
+ ------------------------------------------
+ ===============================================*/
+#define HI_CFG_UART_ENABLE 0x00000004
+#define HI_CFG_RST232_ENABLE 0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
+#define HI_CFG_HOST_INT_ENABLE 0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ * for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2 0
+#define REF_FREQ_26_0 1
+#define REF_FREQ_38_4 2
+#define REF_FREQ_40_0 3
+#define REF_FREQ_33_6 4
+#define REF_FREQ_NUM 5
+
+#define LUT_PARAM_INTEGER_DIVIDER 0
+#define LUT_PARAM_FRACTIONAL_DIVIDER 1
+#define LUT_PARAM_ATTN_BB 2
+#define LUT_PARAM_ALPHA_BB 3
+#define LUT_PARAM_STOP_TIME_BB 4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER 5
+#define LUT_PARAM_NUM 6
+
+#define ACX_EEPROMLESS_IND_REG (SCR_PAD4)
+#define USE_EEPROM 0
+#define SOFT_RESET_MAX_TIME 1000000
+#define SOFT_RESET_STALL_TIME 1000
+#define NVS_DATA_BUNDARY_ALIGNMENT 4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE 512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT 0x00000101
+
+
+/******************************************************************************
+
+ CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+ RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */
+ RADIO_BAND_5GHZ = 1, /* 5 Ghz band */
+ RADIO_BAND_JAPAN_4_9_GHZ = 2,
+ DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+ INVALID_BAND = 0xFE,
+ MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+ NO_RATE = 0,
+ RATE_1MBPS = 0x0A,
+ RATE_2MBPS = 0x14,
+ RATE_5_5MBPS = 0x37,
+ RATE_6MBPS = 0x0B,
+ RATE_9MBPS = 0x0F,
+ RATE_11MBPS = 0x6E,
+ RATE_12MBPS = 0x0A,
+ RATE_18MBPS = 0x0E,
+ RATE_22MBPS = 0xDC,
+ RATE_24MBPS = 0x09,
+ RATE_36MBPS = 0x0D,
+ RATE_48MBPS = 0x08,
+ RATE_54MBPS = 0x0C
+};
+
+enum {
+ RATE_INDEX_1MBPS = 0,
+ RATE_INDEX_2MBPS = 1,
+ RATE_INDEX_5_5MBPS = 2,
+ RATE_INDEX_6MBPS = 3,
+ RATE_INDEX_9MBPS = 4,
+ RATE_INDEX_11MBPS = 5,
+ RATE_INDEX_12MBPS = 6,
+ RATE_INDEX_18MBPS = 7,
+ RATE_INDEX_22MBPS = 8,
+ RATE_INDEX_24MBPS = 9,
+ RATE_INDEX_36MBPS = 10,
+ RATE_INDEX_48MBPS = 11,
+ RATE_INDEX_54MBPS = 12,
+ RATE_INDEX_MAX = RATE_INDEX_54MBPS,
+ MAX_RATE_INDEX,
+ INVALID_RATE_INDEX = MAX_RATE_INDEX,
+ RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+ RATE_MASK_1MBPS = 0x1,
+ RATE_MASK_2MBPS = 0x2,
+ RATE_MASK_5_5MBPS = 0x4,
+ RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+enum {
+ CCK_LONG = 0,
+ CCK_SHORT = SHORT_PREAMBLE_BIT,
+ PBCC_LONG = PBCC_RATE_BIT,
+ PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+ OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15 - Indicates Preamble type (1=SHORT, 0=LONG).
+ Notes:
+ Must be LONG (0) for 1Mbps rate.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b14 - Indicates PBCC encoding (1=PBCC, 0=not).
+ Notes:
+ Does not apply (set to 0) for rates 1 and 2 Mbps.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b13 - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+#define TNETW1251_CHIP_ID_PG1_0 0x07010101
+#define TNETW1251_CHIP_ID_PG1_1 0x07020101
+#define TNETW1251_CHIP_ID_PG1_2 0x07030101
+
+/*************************************************************************
+
+ Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
new file mode 100644
index 0000000..ad8b690
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1271.h"
+#include "wl1271_acx.h"
+#include "wl1271_reg.h"
+#include "wl1271_rx.h"
+#include "wl1271_spi.h"
+
+static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
+ u32 drv_rx_counter)
+{
+ return status->rx_pkt_descs[drv_rx_counter] & RX_MEM_BLOCK_MASK;
+}
+
+static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
+ u32 drv_rx_counter)
+{
+ return (status->rx_pkt_descs[drv_rx_counter] & RX_BUF_SIZE_MASK) >>
+ RX_BUF_SIZE_SHIFT_DIV;
+}
+
+/* The values of this table must match the wl1271_rates[] array */
+static u8 wl1271_rx_rate_to_idx[] = {
+ /* MCS rates are used only with 11n */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */
+
+ 11, /* WL1271_RATE_54 */
+ 10, /* WL1271_RATE_48 */
+ 9, /* WL1271_RATE_36 */
+ 8, /* WL1271_RATE_24 */
+
+ /* TI-specific rate */
+ WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22 */
+
+ 7, /* WL1271_RATE_18 */
+ 6, /* WL1271_RATE_12 */
+ 3, /* WL1271_RATE_11 */
+ 5, /* WL1271_RATE_9 */
+ 4, /* WL1271_RATE_6 */
+ 2, /* WL1271_RATE_5_5 */
+ 1, /* WL1271_RATE_2 */
+ 0 /* WL1271_RATE_1 */
+};
+
+static void wl1271_rx_status(struct wl1271 *wl,
+ struct wl1271_rx_descriptor *desc,
+ struct ieee80211_rx_status *status,
+ u8 beacon)
+{
+ memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+ if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
+ status->band = IEEE80211_BAND_2GHZ;
+ else
+ wl1271_warning("unsupported band 0x%x",
+ desc->flags & WL1271_RX_DESC_BAND_MASK);
+
+ /*
+ * FIXME: Add mactime handling. For IBSS (ad-hoc) we need to get the
+ * timestamp from the beacon (acx_tsf_info). In BSS mode (infra) we
+ * only need the mactime for monitor mode. For now the mactime is
+ * not valid, so RX_FLAG_TSFT should not be set
+ */
+ status->signal = desc->rssi;
+
+ /* FIXME: Should this be optimized? */
+ status->qual = (desc->rssi - WL1271_RX_MIN_RSSI) * 100 /
+ (WL1271_RX_MAX_RSSI - WL1271_RX_MIN_RSSI);
+ status->qual = min(status->qual, 100);
+ status->qual = max(status->qual, 0);
+
+ /*
+ * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we
+ * need to divide by two for now, but TI has been discussing about
+ * changing it. This needs to be rechecked.
+ */
+ status->noise = desc->rssi - (desc->snr >> 1);
+
+ status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+ if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
+ status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+ if (likely(!(desc->flags & WL1271_RX_DESC_DECRYPT_FAIL)))
+ status->flag |= RX_FLAG_DECRYPTED;
+
+ if (unlikely(desc->flags & WL1271_RX_DESC_MIC_FAIL))
+ status->flag |= RX_FLAG_MMIC_ERROR;
+ }
+
+ status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
+
+ if (status->rate_idx == WL1271_RX_RATE_UNSUPPORTED)
+ wl1271_warning("unsupported rate");
+}
+
+static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
+{
+ struct ieee80211_rx_status rx_status;
+ struct wl1271_rx_descriptor *desc;
+ struct sk_buff *skb;
+ u16 *fc;
+ u8 *buf;
+ u8 beacon = 0;
+
+ skb = dev_alloc_skb(length);
+ if (!skb) {
+ wl1271_error("Couldn't allocate RX frame");
+ return;
+ }
+
+ buf = skb_put(skb, length);
+ wl1271_spi_reg_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
+
+ /* the data read starts with the descriptor */
+ desc = (struct wl1271_rx_descriptor *) buf;
+
+ /* now we pull the descriptor out of the buffer */
+ skb_pull(skb, sizeof(*desc));
+
+ fc = (u16 *)skb->data;
+ if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+ beacon = 1;
+
+ wl1271_rx_status(wl, desc, &rx_status, beacon);
+
+ wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+ beacon ? "beacon" : "");
+
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx(wl->hw, skb);
+}
+
+void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
+{
+ struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
+ u32 buf_size;
+ u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+ u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+ u32 mem_block;
+
+ while (drv_rx_counter != fw_rx_counter) {
+ mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
+ buf_size = wl1271_rx_get_buf_size(status, drv_rx_counter);
+
+ if (buf_size == 0) {
+ wl1271_warning("received empty data");
+ break;
+ }
+
+ wl->rx_mem_pool_addr.addr =
+ (mem_block << 8) + wl_mem_map->packet_memory_pool_start;
+ wl->rx_mem_pool_addr.addr_extra =
+ wl->rx_mem_pool_addr.addr + 4;
+
+ /* Choose the block we want to read */
+ wl1271_spi_reg_write(wl, WL1271_SLV_REG_DATA,
+ &wl->rx_mem_pool_addr,
+ sizeof(wl->rx_mem_pool_addr), false);
+
+ wl1271_rx_handle_data(wl, buf_size);
+
+ wl->rx_counter++;
+ drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+ }
+
+ wl1271_reg_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
+
+ /* This is a workaround for some problems in the chip */
+ wl1271_reg_write32(wl, RX_DRIVER_DUMMY_WRITE_ADDRESS, 0x1);
+
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.h b/drivers/net/wireless/wl12xx/wl1271_rx.h
new file mode 100644
index 0000000..d1ca60e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_RX_H__
+#define __WL1271_RX_H__
+
+#include <linux/bitops.h>
+
+#define WL1271_RX_MAX_RSSI -30
+#define WL1271_RX_MIN_RSSI -95
+
+#define WL1271_RX_ALIGN_TO 4
+#define WL1271_RX_ALIGN(len) (((len) + WL1271_RX_ALIGN_TO - 1) & \
+ ~(WL1271_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT BIT(0)
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define NUM_RX_PKT_DESC_MOD_MASK 7
+#define WL1271_RX_RATE_UNSUPPORTED 0xFF
+
+#define RX_DESC_VALID_FCS 0x0001
+#define RX_DESC_MATCH_RXADDR1 0x0002
+#define RX_DESC_MCAST 0x0004
+#define RX_DESC_STAINTIM 0x0008
+#define RX_DESC_VIRTUAL_BM 0x0010
+#define RX_DESC_BCAST 0x0020
+#define RX_DESC_MATCH_SSID 0x0040
+#define RX_DESC_MATCH_BSSID 0x0080
+#define RX_DESC_ENCRYPTION_MASK 0x0300
+#define RX_DESC_MEASURMENT 0x0400
+#define RX_DESC_SEQNUM_MASK 0x1800
+#define RX_DESC_MIC_FAIL 0x2000
+#define RX_DESC_DECRYPT_FAIL 0x4000
+
+/*
+ * RX Descriptor flags:
+ *
+ * Bits 0-1 - band
+ * Bit 2 - STBC
+ * Bit 3 - A-MPDU
+ * Bit 4 - HT
+ * Bits 5-7 - encryption
+ */
+#define WL1271_RX_DESC_BAND_MASK 0x03
+#define WL1271_RX_DESC_ENCRYPT_MASK 0xE0
+
+#define WL1271_RX_DESC_BAND_BG 0x00
+#define WL1271_RX_DESC_BAND_J 0x01
+#define WL1271_RX_DESC_BAND_A 0x02
+
+#define WL1271_RX_DESC_STBC BIT(2)
+#define WL1271_RX_DESC_A_MPDU BIT(3)
+#define WL1271_RX_DESC_HT BIT(4)
+
+#define WL1271_RX_DESC_ENCRYPT_WEP 0x20
+#define WL1271_RX_DESC_ENCRYPT_TKIP 0x40
+#define WL1271_RX_DESC_ENCRYPT_AES 0x60
+#define WL1271_RX_DESC_ENCRYPT_GEM 0x80
+
+/*
+ * RX Descriptor status
+ *
+ * Bits 0-2 - status
+ * Bits 3-7 - reserved
+ */
+#define WL1271_RX_DESC_STATUS_MASK 0x07
+
+#define WL1271_RX_DESC_SUCCESS 0x00
+#define WL1271_RX_DESC_DECRYPT_FAIL 0x01
+#define WL1271_RX_DESC_MIC_FAIL 0x02
+#define WL1271_RX_DESC_DRIVER_RX_Q_FAIL 0x03
+
+#define RX_MEM_BLOCK_MASK 0xFF
+#define RX_BUF_SIZE_MASK 0xFFF00
+#define RX_BUF_SIZE_SHIFT_DIV 6
+
+struct wl1271_rx_descriptor {
+ u16 length;
+ u8 status;
+ u8 flags;
+ u8 rate;
+ u8 channel;
+ s8 rssi;
+ u8 snr;
+ u32 timestamp;
+ u8 packet_class;
+ u8 process_id;
+ u8 pad_len;
+ u8 reserved;
+} __attribute__ ((packed));
+
+void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
new file mode 100644
index 0000000..4a12880
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -0,0 +1,382 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl1271.h"
+#include "wl12xx_80211.h"
+#include "wl1271_spi.h"
+
+static int wl1271_translate_reg_addr(struct wl1271 *wl, int addr)
+{
+ return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl1271_translate_mem_addr(struct wl1271 *wl, int addr)
+{
+ return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+
+void wl1271_spi_reset(struct wl1271 *wl)
+{
+ u8 *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl1271_error("could not allocate cmd for spi reset");
+ return;
+ }
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+void wl1271_spi_init(struct wl1271 *wl)
+{
+ u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl1271_error("could not allocate cmd for spi init");
+ return;
+ }
+
+ memset(crc, 0, sizeof(crc));
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ /*
+ * Set WSPI_INIT_COMMAND
+ * the data is being send from the MSB to LSB
+ */
+ cmd[2] = 0xff;
+ cmd[3] = 0xff;
+ cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+ cmd[0] = 0;
+ cmd[7] = 0;
+ cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+ cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+ if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+ cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
+ else
+ cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+ cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+ | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+ crc[0] = cmd[1];
+ crc[1] = cmd[0];
+ crc[2] = cmd[7];
+ crc[3] = cmd[6];
+ crc[4] = cmd[5];
+
+ cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+ cmd[4] |= WSPI_INIT_CMD_END;
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * There are two VIRTUAL (SPI) partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory. This function also makes other checks to
+ * ensure that the partitions are not overlapping. In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ * PHYSICAL address
+ * space
+ *
+ * | |
+ * ...+----+--> mem_start
+ * VIRTUAL address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * part_size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * part_size | | ... | |
+ * + <--+----+... ...+----+--> reg_start
+ * reg_size ... | |
+ * ... | | [PART_1]
+ * ... | |
+ * ...+----+--> reg_start + reg_size
+ * | |
+ *
+ */
+int wl1271_set_partition(struct wl1271 *wl,
+ u32 mem_start, u32 mem_size,
+ u32 reg_start, u32 reg_size)
+{
+ struct wl1271_partition *partition;
+ struct spi_transfer t;
+ struct spi_message m;
+ size_t len, cmd_len;
+ u32 *cmd;
+ int addr;
+
+ cmd_len = sizeof(u32) + 2 * sizeof(struct wl1271_partition);
+ cmd = kzalloc(cmd_len, GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+
+ partition = (struct wl1271_partition *) (cmd + 1);
+ addr = HW_ACCESS_PART0_SIZE_ADDR;
+ len = 2 * sizeof(struct wl1271_partition);
+
+ *cmd |= WSPI_CMD_WRITE;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+
+ /* Make sure that the two partitions together don't exceed the
+ * address range */
+ if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+ wl1271_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+ " address range. Truncating partition[0].");
+ mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+ wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ if ((mem_start < reg_start) &&
+ ((mem_start + mem_size) > reg_start)) {
+ /* Guarantee that the memory partition doesn't overlap the
+ * registers partition */
+ wl1271_debug(DEBUG_SPI, "End of partition[0] is "
+ "overlapping partition[1]. Adjusted.");
+ mem_size = reg_start - mem_start;
+ wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ } else if ((reg_start < mem_start) &&
+ ((reg_start + reg_size) > mem_start)) {
+ /* Guarantee that the register partition doesn't overlap the
+ * memory partition */
+ wl1271_debug(DEBUG_SPI, "End of partition[1] is"
+ " overlapping partition[0]. Adjusted.");
+ reg_size = mem_start - reg_start;
+ wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ partition[0].start = mem_start;
+ partition[0].size = mem_size;
+ partition[1].start = reg_start;
+ partition[1].size = reg_size;
+
+ wl->physical_mem_addr = mem_start;
+ wl->physical_reg_addr = reg_start;
+
+ wl->virtual_mem_addr = 0;
+ wl->virtual_reg_addr = mem_size;
+
+ t.tx_buf = cmd;
+ t.len = cmd_len;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ kfree(cmd);
+
+ return 0;
+}
+
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed)
+{
+ struct spi_transfer t[3];
+ struct spi_message m;
+ u8 *busy_buf;
+ u32 *cmd;
+
+ cmd = &wl->buffer_cmd;
+ busy_buf = wl->buffer_busyword;
+
+ *cmd = 0;
+ *cmd |= WSPI_CMD_READ;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ if (fixed)
+ *cmd |= WSPI_CMD_FIXED;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = 4;
+ spi_message_add_tail(&t[0], &m);
+
+ /* Busy and non busy words read */
+ t[1].rx_buf = busy_buf;
+ t[1].len = WL1271_BUSY_WORD_LEN;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = buf;
+ t[2].len = len;
+ spi_message_add_tail(&t[2], &m);
+
+ spi_sync(wl->spi, &m);
+
+ /* FIXME: check busy words */
+
+ wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
+ wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u32 *cmd;
+
+ cmd = &wl->buffer_cmd;
+
+ *cmd = 0;
+ *cmd |= WSPI_CMD_WRITE;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ if (fixed)
+ *cmd |= WSPI_CMD_FIXED;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(*cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
+ wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf,
+ size_t len)
+{
+ int physical;
+
+ physical = wl1271_translate_mem_addr(wl, addr);
+
+ wl1271_spi_read(wl, physical, buf, len, false);
+}
+
+void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf,
+ size_t len)
+{
+ int physical;
+
+ physical = wl1271_translate_mem_addr(wl, addr);
+
+ wl1271_spi_write(wl, physical, buf, len, false);
+}
+
+void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+ bool fixed)
+{
+ int physical;
+
+ physical = wl1271_translate_reg_addr(wl, addr);
+
+ wl1271_spi_read(wl, physical, buf, len, fixed);
+}
+
+void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+ bool fixed)
+{
+ int physical;
+
+ physical = wl1271_translate_reg_addr(wl, addr);
+
+ wl1271_spi_write(wl, physical, buf, len, fixed);
+}
+
+u32 wl1271_mem_read32(struct wl1271 *wl, int addr)
+{
+ return wl1271_read32(wl, wl1271_translate_mem_addr(wl, addr));
+}
+
+void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val)
+{
+ wl1271_write32(wl, wl1271_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl1271_reg_read32(struct wl1271 *wl, int addr)
+{
+ return wl1271_read32(wl, wl1271_translate_reg_addr(wl, addr));
+}
+
+void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val)
+{
+ wl1271_write32(wl, wl1271_translate_reg_addr(wl, addr), val);
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h
new file mode 100644
index 0000000..2c99684
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.h
@@ -0,0 +1,113 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_SPI_H__
+#define __WL1271_SPI_H__
+
+#include "wl1271_reg.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR 0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR 0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE 4
+
+#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
+
+#define WSPI_CMD_READ 0x40000000
+#define WSPI_CMD_WRITE 0x00000000
+#define WSPI_CMD_FIXED 0x20000000
+#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
+#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN 5
+
+#define WSPI_INIT_CMD_START 0x00
+#define WSPI_INIT_CMD_TX 0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT 0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD 0x40
+#define WSPI_INIT_CMD_IP 0x20
+#define WSPI_INIT_CMD_CS 0x10
+#define WSPI_INIT_CMD_WS 0x08
+#define WSPI_INIT_CMD_WSPI 0x01
+#define WSPI_INIT_CMD_END 0x01
+
+#define WSPI_INIT_CMD_LEN 8
+
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+ ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
+
+
+/* Raw target IO, address is not translated */
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed);
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf,
+ size_t len, bool fixed);
+
+/* Memory target IO, address is tranlated to partition 0 */
+void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf, size_t len);
+void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf, size_t len);
+u32 wl1271_mem_read32(struct wl1271 *wl, int addr);
+void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val);
+
+/* Registers IO */
+void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+ bool fixed);
+void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+ bool fixed);
+u32 wl1271_reg_read32(struct wl1271 *wl, int addr);
+void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val);
+
+/* INIT and RESET words */
+void wl1271_spi_reset(struct wl1271 *wl);
+void wl1271_spi_init(struct wl1271 *wl);
+int wl1271_set_partition(struct wl1271 *wl,
+ u32 part_start, u32 part_size,
+ u32 reg_start, u32 reg_size);
+
+static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
+{
+ wl1271_spi_read(wl, addr, &wl->buffer_32,
+ sizeof(wl->buffer_32), false);
+
+ return wl->buffer_32;
+}
+
+static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
+{
+ wl->buffer_32 = val;
+ wl1271_spi_write(wl, addr, &wl->buffer_32,
+ sizeof(wl->buffer_32), false);
+}
+
+#endif /* __WL1271_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
new file mode 100644
index 0000000..ff22125
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -0,0 +1,378 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1271.h"
+#include "wl1271_spi.h"
+#include "wl1271_reg.h"
+#include "wl1271_ps.h"
+#include "wl1271_tx.h"
+
+static int wl1271_tx_id(struct wl1271 *wl, struct sk_buff *skb)
+{
+ int i;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] == NULL) {
+ wl->tx_frames[i] = skb;
+ return i;
+ }
+
+ return -EBUSY;
+}
+
+static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra)
+{
+ struct wl1271_tx_hw_descr *desc;
+ u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
+ u32 total_blocks, excluded;
+ int id, ret = -EBUSY;
+
+ /* allocate free identifier for the packet */
+ id = wl1271_tx_id(wl, skb);
+ if (id < 0)
+ return id;
+
+ /* approximate the number of blocks required for this packet
+ in the firmware */
+ /* FIXME: try to figure out what is done here and make it cleaner */
+ total_blocks = (skb->len) >> TX_HW_BLOCK_SHIFT_DIV;
+ excluded = (total_blocks << 2) + (skb->len & 0xff) + 34;
+ total_blocks += (excluded > 252) ? 2 : 1;
+ total_blocks += TX_HW_BLOCK_SPARE;
+
+ if (total_blocks <= wl->tx_blocks_available) {
+ desc = (struct wl1271_tx_hw_descr *)skb_push(
+ skb, total_len - skb->len);
+
+ desc->extra_mem_blocks = TX_HW_BLOCK_SPARE;
+ desc->total_mem_blocks = total_blocks;
+ desc->id = id;
+
+ wl->tx_blocks_available -= total_blocks;
+
+ ret = 0;
+
+ wl1271_debug(DEBUG_TX,
+ "tx_allocate: size: %d, blocks: %d, id: %d",
+ total_len, total_blocks, id);
+ } else
+ wl->tx_frames[id] = NULL;
+
+ return ret;
+}
+
+static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
+ u32 extra, struct ieee80211_tx_info *control)
+{
+ struct wl1271_tx_hw_descr *desc;
+ int pad;
+
+ desc = (struct wl1271_tx_hw_descr *) skb->data;
+
+ /* configure packet life time */
+ desc->start_time = jiffies_to_usecs(jiffies) - wl->time_offset;
+ desc->life_time = TX_HW_MGMT_PKT_LIFETIME_TU;
+
+ /* configure the tx attributes */
+ desc->tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
+ /* FIXME: do we know the packet priority? can we identify mgmt
+ packets, and use max prio for them at least? */
+ desc->tid = 0;
+ desc->aid = TX_HW_DEFAULT_AID;
+ desc->reserved = 0;
+
+ /* align the length (and store in terms of words) */
+ pad = WL1271_TX_ALIGN(skb->len);
+ desc->length = pad >> 2;
+
+ /* calculate number of padding bytes */
+ pad = pad - skb->len;
+ desc->tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+
+ wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
+ return 0;
+}
+
+static int wl1271_tx_send_packet(struct wl1271 *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+
+ struct wl1271_tx_hw_descr *desc;
+ int len;
+
+ /* FIXME: This is a workaround for getting non-aligned packets.
+ This happens at least with EAPOL packets from the user space.
+ Our DMA requires packets to be aligned on a 4-byte boundary.
+ */
+ if (unlikely((long)skb->data & 0x03)) {
+ int offset = (4 - (long)skb->data) & 0x03;
+ wl1271_debug(DEBUG_TX, "skb offset %d", offset);
+
+ /* check whether the current skb can be used */
+ if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+ unsigned char *src = skb->data;
+
+ /* align the buffer on a 4-byte boundary */
+ skb_reserve(skb, offset);
+ memmove(skb->data, src, skb->len);
+ } else {
+ wl1271_info("No handler, fixme!");
+ return -EINVAL;
+ }
+ }
+
+ len = WL1271_TX_ALIGN(skb->len);
+
+ /* perform a fixed address block write with the packet */
+ wl1271_spi_reg_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
+
+ /* write packet new counter into the write access register */
+ wl->tx_packets_count++;
+ wl1271_reg_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
+
+ desc = (struct wl1271_tx_hw_descr *) skb->data;
+ wl1271_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u (%u words)",
+ desc->id, skb, len, desc->length);
+
+ return 0;
+}
+
+/* caller must hold wl->mutex */
+static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info;
+ u32 extra = 0;
+ int ret = 0;
+ u8 idx;
+
+ if (!skb)
+ return -EINVAL;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.hw_key &&
+ info->control.hw_key->alg == ALG_TKIP)
+ extra = WL1271_TKIP_IV_SPACE;
+
+ if (info->control.hw_key) {
+ idx = info->control.hw_key->hw_key_idx;
+
+ /* FIXME: do we have to do this if we're not using WEP? */
+ if (unlikely(wl->default_key != idx)) {
+ ret = wl1271_cmd_set_default_wep_key(wl, idx);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ ret = wl1271_tx_allocate(wl, skb, extra);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_tx_fill_hdr(wl, skb, extra, info);
+ if (ret < 0)
+ return ret;
+
+ ret = wl1271_tx_send_packet(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+void wl1271_tx_work(struct work_struct *work)
+{
+ struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
+ struct sk_buff *skb;
+ bool woken_up = false;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state == WL1271_STATE_OFF))
+ goto out;
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ if (!woken_up) {
+ ret = wl1271_ps_elp_wakeup(wl, false);
+ if (ret < 0)
+ goto out;
+ woken_up = true;
+ }
+
+ ret = wl1271_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is full, stop queues */
+ wl1271_debug(DEBUG_TX, "tx_work: fw buffer full, "
+ "stop queues");
+ ieee80211_stop_queues(wl->hw);
+ wl->tx_queue_stopped = true;
+ skb_queue_head(&wl->tx_queue, skb);
+ goto out;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ goto out;
+ } else if (wl->tx_queue_stopped) {
+ /* firmware buffer has space, restart queues */
+ wl1271_debug(DEBUG_TX,
+ "complete_packet: waking queues");
+ ieee80211_wake_queues(wl->hw);
+ wl->tx_queue_stopped = false;
+ }
+ }
+
+out:
+ if (woken_up)
+ wl1271_ps_elp_sleep(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static void wl1271_tx_complete_packet(struct wl1271 *wl,
+ struct wl1271_tx_hw_res_descr *result)
+{
+
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+ u32 header_len;
+ int id = result->id;
+
+ /* check for id legality */
+ if (id >= TX_HW_RESULT_QUEUE_LEN || wl->tx_frames[id] == NULL) {
+ wl1271_warning("TX result illegal id: %d", id);
+ return;
+ }
+
+ skb = wl->tx_frames[id];
+ info = IEEE80211_SKB_CB(skb);
+
+ /* update packet status */
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ if (result->status == TX_SUCCESS)
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ if (result->status & TX_RETRY_EXCEEDED) {
+ /* FIXME */
+ /* info->status.excessive_retries = 1; */
+ wl->stats.excessive_retries++;
+ }
+ }
+
+ /* FIXME */
+ /* info->status.retry_count = result->ack_failures; */
+ wl->stats.retry_count += result->ack_failures;
+
+ /* get header len */
+ if (info->control.hw_key &&
+ info->control.hw_key->alg == ALG_TKIP)
+ header_len = WL1271_TKIP_IV_SPACE +
+ sizeof(struct wl1271_tx_hw_descr);
+ else
+ header_len = sizeof(struct wl1271_tx_hw_descr);
+
+ wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+ " status 0x%x",
+ result->id, skb, result->ack_failures,
+ result->rate_class_index, result->status);
+
+ /* remove private header from packet */
+ skb_pull(skb, header_len);
+
+ /* return the packet to the stack */
+ ieee80211_tx_status(wl->hw, skb);
+ wl->tx_frames[result->id] = NULL;
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl1271_tx_complete(struct wl1271 *wl, u32 count)
+{
+ struct wl1271_acx_mem_map *memmap =
+ (struct wl1271_acx_mem_map *)wl->target_mem_map;
+ u32 i;
+
+ wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
+
+ /* read the tx results from the chipset */
+ wl1271_spi_mem_read(wl, memmap->tx_result,
+ wl->tx_res_if, sizeof(*wl->tx_res_if));
+
+ /* verify that the result buffer is not getting overrun */
+ if (count > TX_HW_RESULT_QUEUE_LEN) {
+ wl1271_warning("TX result overflow from chipset: %d", count);
+ count = TX_HW_RESULT_QUEUE_LEN;
+ }
+
+ /* process the results */
+ for (i = 0; i < count; i++) {
+ struct wl1271_tx_hw_res_descr *result;
+ u8 offset = wl->tx_results_count & TX_HW_RESULT_QUEUE_LEN_MASK;
+
+ /* process the packet */
+ result = &(wl->tx_res_if->tx_results_queue[offset]);
+ wl1271_tx_complete_packet(wl, result);
+
+ wl->tx_results_count++;
+ }
+
+ /* write host counter to chipset (to ack) */
+ wl1271_mem_write32(wl, memmap->tx_result +
+ offsetof(struct wl1271_tx_hw_res_if,
+ tx_result_host_counter),
+ wl->tx_res_if->tx_result_fw_counter);
+}
+
+/* caller must hold wl->mutex */
+void wl1271_tx_flush(struct wl1271 *wl)
+{
+ int i;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+
+ /* TX failure */
+/* control->flags = 0; FIXME */
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ info = IEEE80211_SKB_CB(skb);
+
+ wl1271_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ }
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] != NULL) {
+ skb = wl->tx_frames[i];
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ wl->tx_frames[i] = NULL;
+ }
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h
new file mode 100644
index 0000000..4a61406
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.h
@@ -0,0 +1,130 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_TX_H__
+#define __WL1271_TX_H__
+
+#define TX_HW_BLOCK_SPARE 2
+#define TX_HW_BLOCK_SHIFT_DIV 8
+
+#define TX_HW_MGMT_PKT_LIFETIME_TU 2000
+/* The chipset reference driver states, that the "aid" value 1
+ * is for infra-BSS, but is still always used */
+#define TX_HW_DEFAULT_AID 1
+
+#define TX_HW_ATTR_SAVE_RETRIES BIT(0)
+#define TX_HW_ATTR_HEADER_PAD BIT(1)
+#define TX_HW_ATTR_SESSION_COUNTER (BIT(2) | BIT(3) | BIT(4))
+#define TX_HW_ATTR_RATE_POLICY (BIT(5) | BIT(6) | BIT(7) | \
+ BIT(8) | BIT(9))
+#define TX_HW_ATTR_LAST_WORD_PAD (BIT(10) | BIT(11))
+#define TX_HW_ATTR_TX_CMPLT_REQ BIT(12)
+
+#define TX_HW_ATTR_OFST_SAVE_RETRIES 0
+#define TX_HW_ATTR_OFST_HEADER_PAD 1
+#define TX_HW_ATTR_OFST_SESSION_COUNTER 2
+#define TX_HW_ATTR_OFST_RATE_POLICY 5
+#define TX_HW_ATTR_OFST_LAST_WORD_PAD 10
+#define TX_HW_ATTR_OFST_TX_CMPLT_REQ 12
+
+#define TX_HW_RESULT_QUEUE_LEN 16
+#define TX_HW_RESULT_QUEUE_LEN_MASK 0xf
+
+#define WL1271_TX_ALIGN_TO 4
+#define WL1271_TX_ALIGN(len) (((len) + WL1271_TX_ALIGN_TO - 1) & \
+ ~(WL1271_TX_ALIGN_TO - 1))
+#define WL1271_TKIP_IV_SPACE 4
+
+struct wl1271_tx_hw_descr {
+ /* Length of packet in words, including descriptor+header+data */
+ u16 length;
+ /* Number of extra memory blocks to allocate for this packet in
+ addition to the number of blocks derived from the packet length */
+ u8 extra_mem_blocks;
+ /* Total number of memory blocks allocated by the host for this packet.
+ Must be equal or greater than the actual blocks number allocated by
+ HW!! */
+ u8 total_mem_blocks;
+ /* Device time (in us) when the packet arrived to the driver */
+ u32 start_time;
+ /* Max delay in TUs until transmission. The last device time the
+ packet can be transmitted is: startTime+(1024*LifeTime) */
+ u16 life_time;
+ /* Bitwise fields - see TX_ATTR... definitions above. */
+ u16 tx_attr;
+ /* Packet identifier used also in the Tx-Result. */
+ u8 id;
+ /* The packet TID value (as User-Priority) */
+ u8 tid;
+ /* Identifier of the remote STA in IBSS, 1 in infra-BSS */
+ u8 aid;
+ u8 reserved;
+} __attribute__ ((packed));
+
+enum wl1271_tx_hw_res_status {
+ TX_SUCCESS = 0,
+ TX_HW_ERROR = 1,
+ TX_DISABLED = 2,
+ TX_RETRY_EXCEEDED = 3,
+ TX_TIMEOUT = 4,
+ TX_KEY_NOT_FOUND = 5,
+ TX_PEER_NOT_FOUND = 6,
+ TX_SESSION_MISMATCH = 7
+};
+
+struct wl1271_tx_hw_res_descr {
+ /* Packet Identifier - same value used in the Tx descriptor.*/
+ u8 id;
+ /* The status of the transmission, indicating success or one of
+ several possible reasons for failure. */
+ u8 status;
+ /* Total air access duration including all retrys and overheads.*/
+ u16 medium_usage;
+ /* The time passed from host xfer to Tx-complete.*/
+ u32 fw_handling_time;
+ /* Total media delay
+ (from 1st EDCA AIFS counter until TX Complete). */
+ u32 medium_delay;
+ /* LS-byte of last TKIP seq-num (saved per AC for recovery). */
+ u8 lsb_security_sequence_number;
+ /* Retry count - number of transmissions without successful ACK.*/
+ u8 ack_failures;
+ /* The rate that succeeded getting ACK
+ (Valid only if status=SUCCESS). */
+ u8 rate_class_index;
+ /* for 4-byte alignment. */
+ u8 spare;
+} __attribute__ ((packed));
+
+struct wl1271_tx_hw_res_if {
+ u32 tx_result_fw_counter;
+ u32 tx_result_host_counter;
+ struct wl1271_tx_hw_res_descr tx_results_queue[TX_HW_RESULT_QUEUE_LEN];
+} __attribute__ ((packed));
+
+void wl1271_tx_work(struct work_struct *work);
+void wl1271_tx_complete(struct wl1271 *wl, u32 count);
+void wl1271_tx_flush(struct wl1271 *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
deleted file mode 100644
index 4864143..0000000
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (c) 1998-2007 Texas Instruments Incorporated
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL12XX_H__
-#define __WL12XX_H__
-
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <net/mac80211.h>
-
-#define DRIVER_NAME "wl12xx"
-#define DRIVER_PREFIX DRIVER_NAME ": "
-
-enum {
- DEBUG_NONE = 0,
- DEBUG_IRQ = BIT(0),
- DEBUG_SPI = BIT(1),
- DEBUG_BOOT = BIT(2),
- DEBUG_MAILBOX = BIT(3),
- DEBUG_NETLINK = BIT(4),
- DEBUG_EVENT = BIT(5),
- DEBUG_TX = BIT(6),
- DEBUG_RX = BIT(7),
- DEBUG_SCAN = BIT(8),
- DEBUG_CRYPT = BIT(9),
- DEBUG_PSM = BIT(10),
- DEBUG_MAC80211 = BIT(11),
- DEBUG_CMD = BIT(12),
- DEBUG_ACX = BIT(13),
- DEBUG_ALL = ~0,
-};
-
-#define DEBUG_LEVEL (DEBUG_NONE)
-
-#define DEBUG_DUMP_LIMIT 1024
-
-#define wl12xx_error(fmt, arg...) \
- printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
-
-#define wl12xx_warning(fmt, arg...) \
- printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
-
-#define wl12xx_notice(fmt, arg...) \
- printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
-
-#define wl12xx_info(fmt, arg...) \
- printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
-
-#define wl12xx_debug(level, fmt, arg...) \
- do { \
- if (level & DEBUG_LEVEL) \
- printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
- } while (0)
-
-#define wl12xx_dump(level, prefix, buf, len) \
- do { \
- if (level & DEBUG_LEVEL) \
- print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
- DUMP_PREFIX_OFFSET, 16, 1, \
- buf, \
- min_t(size_t, len, DEBUG_DUMP_LIMIT), \
- 0); \
- } while (0)
-
-#define wl12xx_dump_ascii(level, prefix, buf, len) \
- do { \
- if (level & DEBUG_LEVEL) \
- print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
- DUMP_PREFIX_OFFSET, 16, 1, \
- buf, \
- min_t(size_t, len, DEBUG_DUMP_LIMIT), \
- true); \
- } while (0)
-
-#define WL12XX_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
- CFG_BSSID_FILTER_EN)
-
-#define WL12XX_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \
- CFG_RX_MGMT_EN | \
- CFG_RX_DATA_EN | \
- CFG_RX_CTL_EN | \
- CFG_RX_BCN_EN | \
- CFG_RX_AUTH_EN | \
- CFG_RX_ASSOC_EN)
-
-
-struct boot_attr {
- u32 radio_type;
- u8 mac_clock;
- u8 arm_clock;
- int firmware_debug;
- u32 minor;
- u32 major;
- u32 bugfix;
-};
-
-enum wl12xx_state {
- WL12XX_STATE_OFF,
- WL12XX_STATE_ON,
- WL12XX_STATE_PLT,
-};
-
-enum wl12xx_partition_type {
- PART_DOWN,
- PART_WORK,
- PART_DRPW,
-
- PART_TABLE_LEN
-};
-
-struct wl12xx_partition {
- u32 size;
- u32 start;
-};
-
-struct wl12xx_partition_set {
- struct wl12xx_partition mem;
- struct wl12xx_partition reg;
-};
-
-struct wl12xx;
-
-/* FIXME: I'm not sure about this structure name */
-struct wl12xx_chip {
- u32 id;
-
- const char *fw_filename;
- const char *nvs_filename;
-
- char fw_ver[21];
-
- unsigned int power_on_sleep;
- int intr_cmd_complete;
- int intr_init_complete;
-
- int (*op_upload_fw)(struct wl12xx *wl);
- int (*op_upload_nvs)(struct wl12xx *wl);
- int (*op_boot)(struct wl12xx *wl);
- void (*op_set_ecpu_ctrl)(struct wl12xx *wl, u32 flag);
- void (*op_target_enable_interrupts)(struct wl12xx *wl);
- int (*op_hw_init)(struct wl12xx *wl);
- int (*op_plt_init)(struct wl12xx *wl);
-
- struct wl12xx_partition_set *p_table;
- enum wl12xx_acx_int_reg *acx_reg_table;
-};
-
-struct wl12xx_stats {
- struct acx_statistics *fw_stats;
- unsigned long fw_stats_update;
-
- unsigned int retry_count;
- unsigned int excessive_retries;
-};
-
-struct wl12xx_debugfs {
- struct dentry *rootdir;
- struct dentry *fw_statistics;
-
- struct dentry *tx_internal_desc_overflow;
-
- struct dentry *rx_out_of_mem;
- struct dentry *rx_hdr_overflow;
- struct dentry *rx_hw_stuck;
- struct dentry *rx_dropped;
- struct dentry *rx_fcs_err;
- struct dentry *rx_xfr_hint_trig;
- struct dentry *rx_path_reset;
- struct dentry *rx_reset_counter;
-
- struct dentry *dma_rx_requested;
- struct dentry *dma_rx_errors;
- struct dentry *dma_tx_requested;
- struct dentry *dma_tx_errors;
-
- struct dentry *isr_cmd_cmplt;
- struct dentry *isr_fiqs;
- struct dentry *isr_rx_headers;
- struct dentry *isr_rx_mem_overflow;
- struct dentry *isr_rx_rdys;
- struct dentry *isr_irqs;
- struct dentry *isr_tx_procs;
- struct dentry *isr_decrypt_done;
- struct dentry *isr_dma0_done;
- struct dentry *isr_dma1_done;
- struct dentry *isr_tx_exch_complete;
- struct dentry *isr_commands;
- struct dentry *isr_rx_procs;
- struct dentry *isr_hw_pm_mode_changes;
- struct dentry *isr_host_acknowledges;
- struct dentry *isr_pci_pm;
- struct dentry *isr_wakeups;
- struct dentry *isr_low_rssi;
-
- struct dentry *wep_addr_key_count;
- struct dentry *wep_default_key_count;
- /* skipping wep.reserved */
- struct dentry *wep_key_not_found;
- struct dentry *wep_decrypt_fail;
- struct dentry *wep_packets;
- struct dentry *wep_interrupt;
-
- struct dentry *pwr_ps_enter;
- struct dentry *pwr_elp_enter;
- struct dentry *pwr_missing_bcns;
- struct dentry *pwr_wake_on_host;
- struct dentry *pwr_wake_on_timer_exp;
- struct dentry *pwr_tx_with_ps;
- struct dentry *pwr_tx_without_ps;
- struct dentry *pwr_rcvd_beacons;
- struct dentry *pwr_power_save_off;
- struct dentry *pwr_enable_ps;
- struct dentry *pwr_disable_ps;
- struct dentry *pwr_fix_tsf_ps;
- /* skipping cont_miss_bcns_spread for now */
- struct dentry *pwr_rcvd_awake_beacons;
-
- struct dentry *mic_rx_pkts;
- struct dentry *mic_calc_failure;
-
- struct dentry *aes_encrypt_fail;
- struct dentry *aes_decrypt_fail;
- struct dentry *aes_encrypt_packets;
- struct dentry *aes_decrypt_packets;
- struct dentry *aes_encrypt_interrupt;
- struct dentry *aes_decrypt_interrupt;
-
- struct dentry *event_heart_beat;
- struct dentry *event_calibration;
- struct dentry *event_rx_mismatch;
- struct dentry *event_rx_mem_empty;
- struct dentry *event_rx_pool;
- struct dentry *event_oom_late;
- struct dentry *event_phy_transmit_error;
- struct dentry *event_tx_stuck;
-
- struct dentry *ps_pspoll_timeouts;
- struct dentry *ps_upsd_timeouts;
- struct dentry *ps_upsd_max_sptime;
- struct dentry *ps_upsd_max_apturn;
- struct dentry *ps_pspoll_max_apturn;
- struct dentry *ps_pspoll_utilization;
- struct dentry *ps_upsd_utilization;
-
- struct dentry *rxpipe_rx_prep_beacon_drop;
- struct dentry *rxpipe_descr_host_int_trig_rx_data;
- struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
- struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
- struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
-
- struct dentry *tx_queue_len;
-
- struct dentry *retry_count;
- struct dentry *excessive_retries;
-};
-
-struct wl12xx {
- struct ieee80211_hw *hw;
- bool mac80211_registered;
-
- struct spi_device *spi;
-
- void (*set_power)(bool enable);
- int irq;
-
- enum wl12xx_state state;
- struct mutex mutex;
-
- int physical_mem_addr;
- int physical_reg_addr;
- int virtual_mem_addr;
- int virtual_reg_addr;
-
- struct wl12xx_chip chip;
-
- int cmd_box_addr;
- int event_box_addr;
- struct boot_attr boot_attr;
-
- u8 *fw;
- size_t fw_len;
- u8 *nvs;
- size_t nvs_len;
-
- u8 bssid[ETH_ALEN];
- u8 mac_addr[ETH_ALEN];
- u8 bss_type;
- u8 listen_int;
- int channel;
-
- void *target_mem_map;
- struct acx_data_path_params_resp *data_path;
-
- /* Number of TX packets transferred to the FW, modulo 16 */
- u32 data_in_count;
-
- /* Frames scheduled for transmission, not handled yet */
- struct sk_buff_head tx_queue;
- bool tx_queue_stopped;
-
- struct work_struct tx_work;
- struct work_struct filter_work;
-
- /* Pending TX frames */
- struct sk_buff *tx_frames[16];
-
- /*
- * Index pointing to the next TX complete entry
- * in the cyclic XT complete array we get from
- * the FW.
- */
- u32 next_tx_complete;
-
- /* FW Rx counter */
- u32 rx_counter;
-
- /* Rx frames handled */
- u32 rx_handled;
-
- /* Current double buffer */
- u32 rx_current_buffer;
- u32 rx_last_id;
-
- /* The target interrupt mask */
- u32 intr_mask;
- struct work_struct irq_work;
-
- /* The mbox event mask */
- u32 event_mask;
-
- /* Mailbox pointers */
- u32 mbox_ptr[2];
-
- /* Are we currently scanning */
- bool scanning;
-
- /* Our association ID */
- u16 aid;
-
- /* Default key (for WEP) */
- u32 default_key;
-
- unsigned int tx_mgmt_frm_rate;
- unsigned int tx_mgmt_frm_mod;
-
- unsigned int rx_config;
- unsigned int rx_filter;
-
- /* is firmware in elp mode */
- bool elp;
-
- /* we can be in psm, but not in elp, we have to differentiate */
- bool psm;
-
- /* PSM mode requested */
- bool psm_requested;
-
- /* in dBm */
- int power_level;
-
- struct wl12xx_stats stats;
- struct wl12xx_debugfs debugfs;
-};
-
-int wl12xx_plt_start(struct wl12xx *wl);
-int wl12xx_plt_stop(struct wl12xx *wl);
-
-#define DEFAULT_HW_GEN_MODULATION_TYPE CCK_LONG /* Long Preamble */
-#define DEFAULT_HW_GEN_TX_RATE RATE_2MBPS
-#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
-
-#define WL12XX_DEFAULT_POWER_LEVEL 20
-
-#define WL12XX_TX_QUEUE_MAX_LENGTH 20
-
-/* Different chips need different sleep times after power on. WL1271 needs
- * 200ms, WL1251 needs only 10ms. By default we use 200ms, but as soon as we
- * know the chip ID, we change the sleep value in the wl12xx chip structure,
- * so in subsequent power ons, we don't waste more time then needed. */
-#define WL12XX_DEFAULT_POWER_ON_SLEEP 200
-
-#define CHIP_ID_1251_PG10 (0x7010101)
-#define CHIP_ID_1251_PG11 (0x7020101)
-#define CHIP_ID_1251_PG12 (0x7030101)
-#define CHIP_ID_1271_PG10 (0x4030101)
-
-#endif
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index e3e96bb..4f1e0cf 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1333,7 +1333,8 @@
* 1 - Could not transmit (dev_queue_xmit will queue it)
* and try to sent it later
*/
-static int wl3501_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t wl3501_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
int enabled, rc;
struct wl3501_card *this = netdev_priv(dev);
@@ -1348,7 +1349,6 @@
if (rc) {
++dev->stats.tx_dropped;
netif_stop_queue(dev);
- rc = NETDEV_TX_OK;
} else {
++dev->stats.tx_packets;
dev->stats.tx_bytes += skb->len;
@@ -1358,7 +1358,7 @@
netif_stop_queue(dev);
}
spin_unlock_irqrestore(&this->lock, flags);
- return rc;
+ return NETDEV_TX_OK;
}
static int wl3501_open(struct net_device *dev)
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 4430b8d9..bc81974 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -779,7 +779,8 @@
(llc+snap+type+payload)
zd 1 null byte, zd1201 packet type
*/
-static int zd1201_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t zd1201_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct zd1201 *zd = netdev_priv(dev);
unsigned char *txbuf = zd->txdata;
@@ -789,7 +790,7 @@
if (!zd->mac_enabled || zd->monitor) {
dev->stats.tx_dropped++;
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue(dev);
@@ -826,7 +827,7 @@
}
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static void zd1201_tx_timeout(struct net_device *dev)
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 2c813d8..5e110a2 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1278,11 +1278,11 @@
other_led = chip->link_led == LED1 ? LED2 : LED1;
switch (status) {
- case LED_OFF:
+ case ZD_LED_OFF:
ioreqs[0].value = FW_LINK_OFF;
ioreqs[1].value = v[1] & ~(LED1|LED2);
break;
- case LED_SCANNING:
+ case ZD_LED_SCANNING:
ioreqs[0].value = FW_LINK_OFF;
ioreqs[1].value = v[1] & ~other_led;
if (get_seconds() % 3 == 0) {
@@ -1291,7 +1291,7 @@
ioreqs[1].value |= chip->link_led;
}
break;
- case LED_ASSOCIATED:
+ case ZD_LED_ASSOCIATED:
ioreqs[0].value = FW_LINK_TX;
ioreqs[1].value = v[1] & ~other_led;
ioreqs[1].value |= chip->link_led;
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index ee42751..678c139 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -897,9 +897,9 @@
int zd_chip_unlock_phy_regs(struct zd_chip *chip);
enum led_status {
- LED_OFF = 0,
- LED_SCANNING = 1,
- LED_ASSOCIATED = 2,
+ ZD_LED_OFF = 0,
+ ZD_LED_SCANNING = 1,
+ ZD_LED_ASSOCIATED = 2,
};
int zd_chip_control_leds(struct zd_chip *chip, enum led_status status);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 3bd3c77..6d66635 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -711,7 +711,8 @@
memcpy(skb_put(skb, length), buffer, length);
- ieee80211_rx_irqsafe(hw, skb, &stats);
+ memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
+ ieee80211_rx_irqsafe(hw, skb);
return 0;
}
@@ -795,18 +796,40 @@
dev_err(zd_mac_dev(mac), "set_rx_filter_handler error %d\n", r);
}
+static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mclist)
+{
+ struct zd_mac *mac = zd_hw_mac(hw);
+ struct zd_mc_hash hash;
+ int i;
+
+ zd_mc_clear(&hash);
+
+ for (i = 0; i < mc_count; i++) {
+ if (!mclist)
+ break;
+ dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n", mclist->dmi_addr);
+ zd_mc_add_addr(&hash, mclist->dmi_addr);
+ mclist = mclist->next;
+ }
+
+ return hash.low | ((u64)hash.high << 32);
+}
+
#define SUPPORTED_FIF_FLAGS \
(FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \
FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC)
static void zd_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags,
- int mc_count, struct dev_mc_list *mclist)
+ u64 multicast)
{
- struct zd_mc_hash hash;
+ struct zd_mc_hash hash = {
+ .low = multicast,
+ .high = multicast >> 32,
+ };
struct zd_mac *mac = zd_hw_mac(hw);
unsigned long flags;
- int i;
/* Only deal with supported flags */
changed_flags &= SUPPORTED_FIF_FLAGS;
@@ -818,25 +841,16 @@
if (!changed_flags)
return;
- if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) {
+ if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI))
zd_mc_add_all(&hash);
- } else {
- zd_mc_clear(&hash);
- for (i = 0; i < mc_count; i++) {
- if (!mclist)
- break;
- dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n",
- mclist->dmi_addr);
- zd_mc_add_addr(&hash, mclist->dmi_addr);
- mclist = mclist->next;
- }
- }
spin_lock_irqsave(&mac->lock, flags);
mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL);
mac->pass_ctrl = !!(*new_flags & FIF_CONTROL);
mac->multicast_hash = hash;
spin_unlock_irqrestore(&mac->lock, flags);
+
+ /* XXX: these can be called here now, can sleep now! */
queue_work(zd_workqueue, &mac->set_multicast_hash_work);
if (changed_flags & FIF_CONTROL)
@@ -939,6 +953,7 @@
.add_interface = zd_op_add_interface,
.remove_interface = zd_op_remove_interface,
.config = zd_op_config,
+ .prepare_multicast = zd_op_prepare_multicast,
.configure_filter = zd_op_configure_filter,
.bss_info_changed = zd_op_bss_info_changed,
.get_tsf = zd_op_get_tsf,
@@ -1012,7 +1027,7 @@
spin_unlock_irq(&mac->lock);
r = zd_chip_control_leds(chip,
- is_associated ? LED_ASSOCIATED : LED_SCANNING);
+ is_associated ? ZD_LED_ASSOCIATED : ZD_LED_SCANNING);
if (r)
dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r);
@@ -1037,5 +1052,5 @@
dev_dbg_f(zd_mac_dev(mac), "\n");
cancel_rearming_delayed_workqueue(zd_workqueue,
&mac->housekeeping.link_led_work);
- zd_chip_control_leds(&mac->chip, LED_OFF);
+ zd_chip_control_leds(&mac->chip, ZD_LED_OFF);
}
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 0e6e446..3868884 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -36,58 +36,60 @@
static struct usb_device_id usb_ids[] = {
/* ZD1211 */
+ { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9075), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x157e, 0x3204), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0586, 0x3402), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0b3b, 0x5630), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0b05, 0x170c), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0586, 0x3409), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0b3b, 0x1630), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x157e, 0x3204), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
- { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0b05, 0x171b), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0586, 0x3410), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0586, 0x3412), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x129b, 0x1667), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
- { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3410), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3412), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe501), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0b05, 0x171b), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x129b, 0x1667), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 8d88dae..baa051d 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -51,7 +51,7 @@
#include <xen/interface/memory.h>
#include <xen/interface/grant_table.h>
-static struct ethtool_ops xennet_ethtool_ops;
+static const struct ethtool_ops xennet_ethtool_ops;
struct netfront_cb {
struct page *page;
@@ -558,12 +558,12 @@
spin_unlock_irq(&np->tx_lock);
- return 0;
+ return NETDEV_TX_OK;
drop:
dev->stats.tx_dropped++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static int xennet_close(struct net_device *dev)
@@ -1627,7 +1627,7 @@
}
}
-static struct ethtool_ops xennet_ethtool_ops =
+static const struct ethtool_ops xennet_ethtool_ops =
{
.set_tx_csum = ethtool_op_set_tx_csum,
.set_sg = xennet_set_sg,
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
new file mode 100644
index 0000000..dc22782
--- /dev/null
+++ b/drivers/net/xilinx_emaclite.c
@@ -0,0 +1,1040 @@
+/*
+ * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
+ *
+ * This is a new flat driver which is based on the original emac_lite
+ * driver from John Williams <john.williams@petalogix.com>.
+ *
+ * 2007-2009 (c) Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/io.h>
+
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#define DRIVER_NAME "xilinx_emaclite"
+
+/* Register offsets for the EmacLite Core */
+#define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */
+#define XEL_GIER_OFFSET 0x07F8 /* GIE Register */
+#define XEL_TSR_OFFSET 0x07FC /* Tx status */
+#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
+
+#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
+#define XEL_RPLR_OFFSET 0x100C /* Rx packet length */
+#define XEL_RSR_OFFSET 0x17FC /* Rx status */
+
+#define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */
+
+/* Global Interrupt Enable Register (GIER) Bit Masks */
+#define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */
+
+/* Transmit Status Register (TSR) Bit Masks */
+#define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */
+#define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */
+#define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */
+#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit
+ * only. This is not documented
+ * in the HW spec */
+
+/* Define for programming the MAC address into the EmacLite */
+#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
+
+/* Receive Status Register (RSR) */
+#define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */
+#define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */
+
+/* Transmit Packet Length Register (TPLR) */
+#define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */
+
+/* Receive Packet Length Register (RPLR) */
+#define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */
+
+#define XEL_HEADER_OFFSET 12 /* Offset to length field */
+#define XEL_HEADER_SHIFT 16 /* Shift value for length */
+
+/* General Ethernet Definitions */
+#define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */
+#define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */
+
+
+
+#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */
+#define ALIGNMENT 4
+
+/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+
+/**
+ * struct net_local - Our private per device data
+ * @ndev: instance of the network device
+ * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW
+ * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW
+ * @next_tx_buf_to_use: next Tx buffer to write to
+ * @next_rx_buf_to_use: next Rx buffer to read from
+ * @base_addr: base address of the Emaclite device
+ * @reset_lock: lock used for synchronization
+ * @deferred_skb: holds an skb (for transmission at a later time) when the
+ * Tx buffer is not free
+ */
+struct net_local {
+
+ struct net_device *ndev;
+
+ bool tx_ping_pong;
+ bool rx_ping_pong;
+ u32 next_tx_buf_to_use;
+ u32 next_rx_buf_to_use;
+ void __iomem *base_addr;
+
+ spinlock_t reset_lock;
+ struct sk_buff *deferred_skb;
+};
+
+
+/*************************/
+/* EmacLite driver calls */
+/*************************/
+
+/**
+ * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device
+ * @drvdata: Pointer to the Emaclite device private data
+ *
+ * This function enables the Tx and Rx interrupts for the Emaclite device along
+ * with the Global Interrupt Enable.
+ */
+static void xemaclite_enable_interrupts(struct net_local *drvdata)
+{
+ u32 reg_data;
+
+ /* Enable the Tx interrupts for the first Buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
+ reg_data | XEL_TSR_XMIT_IE_MASK);
+
+ /* Enable the Tx interrupts for the second Buffer if
+ * configured in HW */
+ if (drvdata->tx_ping_pong != 0) {
+ reg_data = in_be32(drvdata->base_addr +
+ XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET,
+ reg_data | XEL_TSR_XMIT_IE_MASK);
+ }
+
+ /* Enable the Rx interrupts for the first buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
+ reg_data | XEL_RSR_RECV_IE_MASK);
+
+ /* Enable the Rx interrupts for the second Buffer if
+ * configured in HW */
+ if (drvdata->rx_ping_pong != 0) {
+ reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET,
+ reg_data | XEL_RSR_RECV_IE_MASK);
+ }
+
+ /* Enable the Global Interrupt Enable */
+ out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+}
+
+/**
+ * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device
+ * @drvdata: Pointer to the Emaclite device private data
+ *
+ * This function disables the Tx and Rx interrupts for the Emaclite device,
+ * along with the Global Interrupt Enable.
+ */
+static void xemaclite_disable_interrupts(struct net_local *drvdata)
+{
+ u32 reg_data;
+
+ /* Disable the Global Interrupt Enable */
+ out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+
+ /* Disable the Tx interrupts for the first buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
+ reg_data & (~XEL_TSR_XMIT_IE_MASK));
+
+ /* Disable the Tx interrupts for the second Buffer
+ * if configured in HW */
+ if (drvdata->tx_ping_pong != 0) {
+ reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET,
+ reg_data & (~XEL_TSR_XMIT_IE_MASK));
+ }
+
+ /* Disable the Rx interrupts for the first buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
+ reg_data & (~XEL_RSR_RECV_IE_MASK));
+
+ /* Disable the Rx interrupts for the second buffer
+ * if configured in HW */
+ if (drvdata->rx_ping_pong != 0) {
+
+ reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET,
+ reg_data & (~XEL_RSR_RECV_IE_MASK));
+ }
+}
+
+/**
+ * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address
+ * @src_ptr: Void pointer to the 16-bit aligned source address
+ * @dest_ptr: Pointer to the 32-bit aligned destination address
+ * @length: Number bytes to write from source to destination
+ *
+ * This function writes data from a 16-bit aligned buffer to a 32-bit aligned
+ * address in the EmacLite device.
+ */
+static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
+ unsigned length)
+{
+ u32 align_buffer;
+ u32 *to_u32_ptr;
+ u16 *from_u16_ptr, *to_u16_ptr;
+
+ to_u32_ptr = dest_ptr;
+ from_u16_ptr = (u16 *) src_ptr;
+ align_buffer = 0;
+
+ for (; length > 3; length -= 4) {
+ to_u16_ptr = (u16 *) ((void *) &align_buffer);
+ *to_u16_ptr++ = *from_u16_ptr++;
+ *to_u16_ptr++ = *from_u16_ptr++;
+
+ /* Output a word */
+ *to_u32_ptr++ = align_buffer;
+ }
+ if (length) {
+ u8 *from_u8_ptr, *to_u8_ptr;
+
+ /* Set up to output the remaining data */
+ align_buffer = 0;
+ to_u8_ptr = (u8 *) &align_buffer;
+ from_u8_ptr = (u8 *) from_u16_ptr;
+
+ /* Output the remaining data */
+ for (; length > 0; length--)
+ *to_u8_ptr++ = *from_u8_ptr++;
+
+ *to_u32_ptr = align_buffer;
+ }
+}
+
+/**
+ * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer
+ * @src_ptr: Pointer to the 32-bit aligned source address
+ * @dest_ptr: Pointer to the 16-bit aligned destination address
+ * @length: Number bytes to read from source to destination
+ *
+ * This function reads data from a 32-bit aligned address in the EmacLite device
+ * to a 16-bit aligned buffer.
+ */
+static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
+ unsigned length)
+{
+ u16 *to_u16_ptr, *from_u16_ptr;
+ u32 *from_u32_ptr;
+ u32 align_buffer;
+
+ from_u32_ptr = src_ptr;
+ to_u16_ptr = (u16 *) dest_ptr;
+
+ for (; length > 3; length -= 4) {
+ /* Copy each word into the temporary buffer */
+ align_buffer = *from_u32_ptr++;
+ from_u16_ptr = (u16 *)&align_buffer;
+
+ /* Read data from source */
+ *to_u16_ptr++ = *from_u16_ptr++;
+ *to_u16_ptr++ = *from_u16_ptr++;
+ }
+
+ if (length) {
+ u8 *to_u8_ptr, *from_u8_ptr;
+
+ /* Set up to read the remaining data */
+ to_u8_ptr = (u8 *) to_u16_ptr;
+ align_buffer = *from_u32_ptr++;
+ from_u8_ptr = (u8 *) &align_buffer;
+
+ /* Read the remaining data */
+ for (; length > 0; length--)
+ *to_u8_ptr = *from_u8_ptr;
+ }
+}
+
+/**
+ * xemaclite_send_data - Send an Ethernet frame
+ * @drvdata: Pointer to the Emaclite device private data
+ * @data: Pointer to the data to be sent
+ * @byte_count: Total frame size, including header
+ *
+ * This function checks if the Tx buffer of the Emaclite device is free to send
+ * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it
+ * returns an error.
+ *
+ * Return: 0 upon success or -1 if the buffer(s) are full.
+ *
+ * Note: The maximum Tx packet size can not be more than Ethernet header
+ * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS.
+ */
+static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
+ unsigned int byte_count)
+{
+ u32 reg_data;
+ void __iomem *addr;
+
+ /* Determine the expected Tx buffer address */
+ addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
+
+ /* If the length is too large, truncate it */
+ if (byte_count > ETH_FRAME_LEN)
+ byte_count = ETH_FRAME_LEN;
+
+ /* Check if the expected buffer is available */
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
+ XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
+
+ /* Switch to next buffer if configured */
+ if (drvdata->tx_ping_pong != 0)
+ drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
+ } else if (drvdata->tx_ping_pong != 0) {
+ /* If the expected buffer is full, try the other buffer,
+ * if it is configured in HW */
+
+ addr = (void __iomem __force *)((u32 __force)addr ^
+ XEL_BUFFER_OFFSET);
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+
+ if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
+ XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
+ return -1; /* Buffers were full, return failure */
+ } else
+ return -1; /* Buffer was full, return failure */
+
+ /* Write the frame to the buffer */
+ xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+
+ out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
+
+ /* Update the Tx Status Register to indicate that there is a
+ * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
+ * is used by the interrupt handler to check whether a frame
+ * has been transmitted */
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
+ out_be32(addr + XEL_TSR_OFFSET, reg_data);
+
+ return 0;
+}
+
+/**
+ * xemaclite_recv_data - Receive a frame
+ * @drvdata: Pointer to the Emaclite device private data
+ * @data: Address where the data is to be received
+ *
+ * This function is intended to be called from the interrupt context or
+ * with a wrapper which waits for the receive frame to be available.
+ *
+ * Return: Total number of bytes received
+ */
+static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
+{
+ void __iomem *addr;
+ u16 length, proto_type;
+ u32 reg_data;
+
+ /* Determine the expected buffer address */
+ addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);
+
+ /* Verify which buffer has valid data */
+ reg_data = in_be32(addr + XEL_RSR_OFFSET);
+
+ if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+ if (drvdata->rx_ping_pong != 0)
+ drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET;
+ } else {
+ /* The instance is out of sync, try other buffer if other
+ * buffer is configured, return 0 otherwise. If the instance is
+ * out of sync, do not update the 'next_rx_buf_to_use' since it
+ * will correct on subsequent calls */
+ if (drvdata->rx_ping_pong != 0)
+ addr = (void __iomem __force *)((u32 __force)addr ^
+ XEL_BUFFER_OFFSET);
+ else
+ return 0; /* No data was available */
+
+ /* Verify that buffer has valid data */
+ reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
+ XEL_RSR_RECV_DONE_MASK)
+ return 0; /* No data was available */
+ }
+
+ /* Get the protocol type of the ethernet frame that arrived */
+ proto_type = ((in_be32(addr + XEL_HEADER_OFFSET +
+ XEL_RXBUFF_OFFSET) >> XEL_HEADER_SHIFT) &
+ XEL_RPLR_LENGTH_MASK);
+
+ /* Check if received ethernet frame is a raw ethernet frame
+ * or an IP packet or an ARP packet */
+ if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+
+ if (proto_type == ETH_P_IP) {
+ length = ((in_be32(addr +
+ XEL_HEADER_IP_LENGTH_OFFSET +
+ XEL_RXBUFF_OFFSET) >>
+ XEL_HEADER_SHIFT) &
+ XEL_RPLR_LENGTH_MASK);
+ length += ETH_HLEN + ETH_FCS_LEN;
+
+ } else if (proto_type == ETH_P_ARP)
+ length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
+ else
+ /* Field contains type other than IP or ARP, use max
+ * frame size and let user parse it */
+ length = ETH_FRAME_LEN + ETH_FCS_LEN;
+ } else
+ /* Use the length in the frame, plus the header and trailer */
+ length = proto_type + ETH_HLEN + ETH_FCS_LEN;
+
+ /* Read from the EmacLite device */
+ xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+ data, length);
+
+ /* Acknowledge the frame */
+ reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data &= ~XEL_RSR_RECV_DONE_MASK;
+ out_be32(addr + XEL_RSR_OFFSET, reg_data);
+
+ return length;
+}
+
+/**
+ * xemaclite_set_mac_address - Set the MAC address for this device
+ * @drvdata: Pointer to the Emaclite device private data
+ * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value)
+ *
+ * Tx must be idle and Rx should be idle for deterministic results.
+ * It is recommended that this function should be called after the
+ * initialization and before transmission of any packets from the device.
+ * The MAC address can be programmed using any of the two transmit
+ * buffers (if configured).
+ */
+static void xemaclite_set_mac_address(struct net_local *drvdata,
+ u8 *address_ptr)
+{
+ void __iomem *addr;
+ u32 reg_data;
+
+ /* Determine the expected Tx buffer address */
+ addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
+
+ xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+
+ out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
+
+ /* Update the MAC address in the EmacLite */
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
+
+ /* Wait for EmacLite to finish with the MAC address update */
+ while ((in_be32(addr + XEL_TSR_OFFSET) &
+ XEL_TSR_PROG_MAC_ADDR) != 0)
+ ;
+}
+
+/**
+ * xemaclite_tx_timeout - Callback for Tx Timeout
+ * @dev: Pointer to the network device
+ *
+ * This function is called when Tx time out occurs for Emaclite device.
+ */
+static void xemaclite_tx_timeout(struct net_device *dev)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+ unsigned long flags;
+
+ dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n",
+ TX_TIMEOUT * 1000UL / HZ);
+
+ dev->stats.tx_errors++;
+
+ /* Reset the device */
+ spin_lock_irqsave(&lp->reset_lock, flags);
+
+ /* Shouldn't really be necessary, but shouldn't hurt */
+ netif_stop_queue(dev);
+
+ xemaclite_disable_interrupts(lp);
+ xemaclite_enable_interrupts(lp);
+
+ if (lp->deferred_skb) {
+ dev_kfree_skb(lp->deferred_skb);
+ lp->deferred_skb = NULL;
+ dev->stats.tx_errors++;
+ }
+
+ /* To exclude tx timeout */
+ dev->trans_start = 0xffffffff - TX_TIMEOUT - TX_TIMEOUT;
+
+ /* We're all ready to go. Start the queue */
+ netif_wake_queue(dev);
+ spin_unlock_irqrestore(&lp->reset_lock, flags);
+}
+
+/**********************/
+/* Interrupt Handlers */
+/**********************/
+
+/**
+ * xemaclite_tx_handler - Interrupt handler for frames sent
+ * @dev: Pointer to the network device
+ *
+ * This function updates the number of packets transmitted and handles the
+ * deferred skb, if there is one.
+ */
+static void xemaclite_tx_handler(struct net_device *dev)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+
+ dev->stats.tx_packets++;
+ if (lp->deferred_skb) {
+ if (xemaclite_send_data(lp,
+ (u8 *) lp->deferred_skb->data,
+ lp->deferred_skb->len) != 0)
+ return;
+ else {
+ dev->stats.tx_bytes += lp->deferred_skb->len;
+ dev_kfree_skb_irq(lp->deferred_skb);
+ lp->deferred_skb = NULL;
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ }
+ }
+}
+
+/**
+ * xemaclite_rx_handler- Interrupt handler for frames received
+ * @dev: Pointer to the network device
+ *
+ * This function allocates memory for a socket buffer, fills it with data
+ * received and hands it over to the TCP/IP stack.
+ */
+static void xemaclite_rx_handler(struct net_device *dev)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+ struct sk_buff *skb;
+ unsigned int align;
+ u32 len;
+
+ len = ETH_FRAME_LEN + ETH_FCS_LEN;
+ skb = dev_alloc_skb(len + ALIGNMENT);
+ if (!skb) {
+ /* Couldn't get memory. */
+ dev->stats.rx_dropped++;
+ dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n");
+ return;
+ }
+
+ /*
+ * A new skb should have the data halfword aligned, but this code is
+ * here just in case that isn't true. Calculate how many
+ * bytes we should reserve to get the data to start on a word
+ * boundary */
+ align = BUFFER_ALIGN(skb->data);
+ if (align)
+ skb_reserve(skb, align);
+
+ skb_reserve(skb, 2);
+
+ len = xemaclite_recv_data(lp, (u8 *) skb->data);
+
+ if (!len) {
+ dev->stats.rx_errors++;
+ dev_kfree_skb_irq(skb);
+ return;
+ }
+
+ skb_put(skb, len); /* Tell the skb how much data we got */
+ skb->dev = dev; /* Fill out required meta-data */
+
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+
+ netif_rx(skb); /* Send the packet upstream */
+}
+
+/**
+ * xemaclite_interrupt - Interrupt handler for this driver
+ * @irq: Irq of the Emaclite device
+ * @dev_id: Void pointer to the network device instance used as callback
+ * reference
+ *
+ * This function handles the Tx and Rx interrupts of the EmacLite device.
+ */
+static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
+{
+ bool tx_complete = 0;
+ struct net_device *dev = dev_id;
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+ void __iomem *base_addr = lp->base_addr;
+ u32 tx_status;
+
+ /* Check if there is Rx Data available */
+ if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
+ (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
+ & XEL_RSR_RECV_DONE_MASK))
+
+ xemaclite_rx_handler(dev);
+
+ /* Check if the Transmission for the first buffer is completed */
+ tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
+ if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
+ (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
+
+ tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
+ out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
+
+ tx_complete = 1;
+ }
+
+ /* Check if the Transmission for the second buffer is completed */
+ tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+ if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
+ (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
+
+ tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
+ out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
+ tx_status);
+
+ tx_complete = 1;
+ }
+
+ /* If there was a Tx interrupt, call the Tx Handler */
+ if (tx_complete != 0)
+ xemaclite_tx_handler(dev);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * xemaclite_open - Open the network device
+ * @dev: Pointer to the network device
+ *
+ * This function sets the MAC address, requests an IRQ and enables interrupts
+ * for the Emaclite device and starts the Tx queue.
+ */
+static int xemaclite_open(struct net_device *dev)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+ int retval;
+
+ /* Just to be safe, stop the device first */
+ xemaclite_disable_interrupts(lp);
+
+ /* Set the MAC address each time opened */
+ xemaclite_set_mac_address(lp, dev->dev_addr);
+
+ /* Grab the IRQ */
+ retval = request_irq(dev->irq, &xemaclite_interrupt, 0, dev->name, dev);
+ if (retval) {
+ dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n",
+ dev->irq);
+ return retval;
+ }
+
+ /* Enable Interrupts */
+ xemaclite_enable_interrupts(lp);
+
+ /* We're ready to go */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/**
+ * xemaclite_close - Close the network device
+ * @dev: Pointer to the network device
+ *
+ * This function stops the Tx queue, disables interrupts and frees the IRQ for
+ * the Emaclite device.
+ */
+static int xemaclite_close(struct net_device *dev)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ xemaclite_disable_interrupts(lp);
+ free_irq(dev->irq, dev);
+
+ return 0;
+}
+
+/**
+ * xemaclite_get_stats - Get the stats for the net_device
+ * @dev: Pointer to the network device
+ *
+ * This function returns the address of the 'net_device_stats' structure for the
+ * given network device. This structure holds usage statistics for the network
+ * device.
+ *
+ * Return: Pointer to the net_device_stats structure.
+ */
+static struct net_device_stats *xemaclite_get_stats(struct net_device *dev)
+{
+ return &dev->stats;
+}
+
+/**
+ * xemaclite_send - Transmit a frame
+ * @orig_skb: Pointer to the socket buffer to be transmitted
+ * @dev: Pointer to the network device
+ *
+ * This function checks if the Tx buffer of the Emaclite device is free to send
+ * data. If so, it fills the Tx buffer with data from socket buffer data,
+ * updates the stats and frees the socket buffer. The Tx completion is signaled
+ * by an interrupt. If the Tx buffer isn't free, then the socket buffer is
+ * deferred and the Tx queue is stopped so that the deferred socket buffer can
+ * be transmitted when the Emaclite device is free to transmit data.
+ *
+ * Return: 0, always.
+ */
+static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+ struct sk_buff *new_skb;
+ unsigned int len;
+ unsigned long flags;
+
+ len = orig_skb->len;
+
+ new_skb = orig_skb;
+
+ spin_lock_irqsave(&lp->reset_lock, flags);
+ if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+ /* If the Emaclite Tx buffer is busy, stop the Tx queue and
+ * defer the skb for transmission at a later point when the
+ * current transmission is complete */
+ netif_stop_queue(dev);
+ lp->deferred_skb = new_skb;
+ spin_unlock_irqrestore(&lp->reset_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&lp->reset_lock, flags);
+
+ dev->stats.tx_bytes += len;
+ dev_kfree_skb(new_skb);
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+/**
+ * xemaclite_ioctl - Perform IO Control operations on the network device
+ * @dev: Pointer to the network device
+ * @rq: Pointer to the interface request structure
+ * @cmd: IOCTL command
+ *
+ * The only IOCTL operation supported by this function is setting the MAC
+ * address. An error is reported if any other operations are requested.
+ *
+ * Return: 0 to indicate success, or a negative error for failure.
+ */
+static int xemaclite_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct net_local *lp = (struct net_local *) netdev_priv(dev);
+ struct hw_addr_data *hw_addr = (struct hw_addr_data *) &rq->ifr_hwaddr;
+
+ switch (cmd) {
+ case SIOCETHTOOL:
+ return -EIO;
+
+ case SIOCSIFHWADDR:
+ dev_err(&lp->ndev->dev, "SIOCSIFHWADDR\n");
+
+ /* Copy MAC address in from user space */
+ copy_from_user((void __force *) dev->dev_addr,
+ (void __user __force *) hw_addr,
+ IFHWADDRLEN);
+ xemaclite_set_mac_address(lp, dev->dev_addr);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+/**
+ * xemaclite_remove_ndev - Free the network device
+ * @ndev: Pointer to the network device to be freed
+ *
+ * This function un maps the IO region of the Emaclite device and frees the net
+ * device.
+ */
+static void xemaclite_remove_ndev(struct net_device *ndev)
+{
+ if (ndev) {
+ struct net_local *lp = (struct net_local *) netdev_priv(ndev);
+
+ if (lp->base_addr)
+ iounmap((void __iomem __force *) (lp->base_addr));
+ free_netdev(ndev);
+ }
+}
+
+/**
+ * get_bool - Get a parameter from the OF device
+ * @ofdev: Pointer to OF device structure
+ * @s: Property to be retrieved
+ *
+ * This function looks for a property in the device node and returns the value
+ * of the property if its found or 0 if the property is not found.
+ *
+ * Return: Value of the parameter if the parameter is found, or 0 otherwise
+ */
+static bool get_bool(struct of_device *ofdev, const char *s)
+{
+ u32 *p = (u32 *)of_get_property(ofdev->node, s, NULL);
+
+ if (p) {
+ return (bool)*p;
+ } else {
+ dev_warn(&ofdev->dev, "Parameter %s not found,"
+ "defaulting to false\n", s);
+ return 0;
+ }
+}
+
+static struct net_device_ops xemaclite_netdev_ops;
+
+/**
+ * xemaclite_of_probe - Probe method for the Emaclite device.
+ * @ofdev: Pointer to OF device structure
+ * @match: Pointer to the structure used for matching a device
+ *
+ * This function probes for the Emaclite device in the device tree.
+ * It initializes the driver data structure and the hardware, sets the MAC
+ * address and registers the network device.
+ *
+ * Return: 0, if the driver is bound to the Emaclite device, or
+ * a negative error if there is failure.
+ */
+static int __devinit xemaclite_of_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct resource r_irq; /* Interrupt resources */
+ struct resource r_mem; /* IO mem resources */
+ struct net_device *ndev = NULL;
+ struct net_local *lp = NULL;
+ struct device *dev = &ofdev->dev;
+ const void *mac_address;
+
+ int rc = 0;
+
+ dev_info(dev, "Device Tree Probing\n");
+
+ /* Get iospace for the device */
+ rc = of_address_to_resource(ofdev->node, 0, &r_mem);
+ if (rc) {
+ dev_err(dev, "invalid address\n");
+ return rc;
+ }
+
+ /* Get IRQ for the device */
+ rc = of_irq_to_resource(ofdev->node, 0, &r_irq);
+ if (rc == NO_IRQ) {
+ dev_err(dev, "no IRQ found\n");
+ return rc;
+ }
+
+ /* Create an ethernet device instance */
+ ndev = alloc_etherdev(sizeof(struct net_local));
+ if (!ndev) {
+ dev_err(dev, "Could not allocate network device\n");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, ndev);
+
+ ndev->irq = r_irq.start;
+ ndev->mem_start = r_mem.start;
+ ndev->mem_end = r_mem.end;
+
+ lp = netdev_priv(ndev);
+ lp->ndev = ndev;
+
+ if (!request_mem_region(ndev->mem_start,
+ ndev->mem_end - ndev->mem_start + 1,
+ DRIVER_NAME)) {
+ dev_err(dev, "Couldn't lock memory region at %p\n",
+ (void *)ndev->mem_start);
+ rc = -EBUSY;
+ goto error2;
+ }
+
+ /* Get the virtual base address for the device */
+ lp->base_addr = ioremap(r_mem.start, r_mem.end - r_mem.start + 1);
+ if (NULL == lp->base_addr) {
+ dev_err(dev, "EmacLite: Could not allocate iomem\n");
+ rc = -EIO;
+ goto error1;
+ }
+
+ spin_lock_init(&lp->reset_lock);
+ lp->next_tx_buf_to_use = 0x0;
+ lp->next_rx_buf_to_use = 0x0;
+ lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong");
+ lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong");
+ mac_address = of_get_mac_address(ofdev->node);
+
+ if (mac_address)
+ /* Set the MAC address. */
+ memcpy(ndev->dev_addr, mac_address, 6);
+ else
+ dev_warn(dev, "No MAC address found\n");
+
+ /* Clear the Tx CSR's in case this is a restart */
+ out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
+ out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
+
+ /* Set the MAC address in the EmacLite device */
+ xemaclite_set_mac_address(lp, ndev->dev_addr);
+
+ dev_info(dev,
+ "MAC address is now %2x:%2x:%2x:%2x:%2x:%2x\n",
+ ndev->dev_addr[0], ndev->dev_addr[1],
+ ndev->dev_addr[2], ndev->dev_addr[3],
+ ndev->dev_addr[4], ndev->dev_addr[5]);
+
+ ndev->netdev_ops = &xemaclite_netdev_ops;
+ ndev->flags &= ~IFF_MULTICAST;
+ ndev->watchdog_timeo = TX_TIMEOUT;
+
+ /* Finally, register the device */
+ rc = register_netdev(ndev);
+ if (rc) {
+ dev_err(dev,
+ "Cannot register network device, aborting\n");
+ goto error1;
+ }
+
+ dev_info(dev,
+ "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n",
+ (unsigned int __force)ndev->mem_start,
+ (unsigned int __force)lp->base_addr, ndev->irq);
+ return 0;
+
+error1:
+ release_mem_region(ndev->mem_start, r_mem.end - r_mem.start + 1);
+
+error2:
+ xemaclite_remove_ndev(ndev);
+ return rc;
+}
+
+/**
+ * xemaclite_of_remove - Unbind the driver from the Emaclite device.
+ * @of_dev: Pointer to OF device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees any resources allocated to
+ * the device.
+ *
+ * Return: 0, always.
+ */
+static int __devexit xemaclite_of_remove(struct of_device *of_dev)
+{
+ struct device *dev = &of_dev->dev;
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ unregister_netdev(ndev);
+
+ release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1);
+
+ xemaclite_remove_ndev(ndev);
+
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+static struct net_device_ops xemaclite_netdev_ops = {
+ .ndo_open = xemaclite_open,
+ .ndo_stop = xemaclite_close,
+ .ndo_start_xmit = xemaclite_send,
+ .ndo_do_ioctl = xemaclite_ioctl,
+ .ndo_tx_timeout = xemaclite_tx_timeout,
+ .ndo_get_stats = xemaclite_get_stats,
+};
+
+/* Match table for OF platform binding */
+static struct of_device_id xemaclite_of_match[] __devinitdata = {
+ { .compatible = "xlnx,opb-ethernetlite-1.01.a", },
+ { .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ { .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ { .compatible = "xlnx,xps-ethernetlite-2.00.a", },
+ { .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ { /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, xemaclite_of_match);
+
+static struct of_platform_driver xemaclite_of_driver = {
+ .name = DRIVER_NAME,
+ .match_table = xemaclite_of_match,
+ .probe = xemaclite_of_probe,
+ .remove = __devexit_p(xemaclite_of_remove),
+};
+
+/**
+ * xgpiopss_init - Initial driver registration call
+ *
+ * Return: 0 upon success, or a negative error upon failure.
+ */
+static int __init xemaclite_init(void)
+{
+ /* No kernel boot options used, we just need to register the driver */
+ return of_register_platform_driver(&xemaclite_of_driver);
+}
+
+/**
+ * xemaclite_cleanup - Driver un-registration call
+ */
+static void __exit xemaclite_cleanup(void)
+{
+ of_unregister_platform_driver(&xemaclite_of_driver);
+}
+
+module_init(xemaclite_init);
+module_exit(xemaclite_cleanup);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c
index 5a4ad15..0c44135 100644
--- a/drivers/net/xtsonic.c
+++ b/drivers/net/xtsonic.c
@@ -239,7 +239,7 @@
* Actually probing is superfluous but we're paranoid.
*/
-int __init xtsonic_probe(struct platform_device *pdev)
+int __devinit xtsonic_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct sonic_local *lp;
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index a075801..40ad0de 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -346,8 +346,9 @@
static int yellowfin_open(struct net_device *dev);
static void yellowfin_timer(unsigned long data);
static void yellowfin_tx_timeout(struct net_device *dev);
-static void yellowfin_init_ring(struct net_device *dev);
-static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int yellowfin_init_ring(struct net_device *dev);
+static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
static int yellowfin_rx(struct net_device *dev);
static void yellowfin_error(struct net_device *dev, int intr_status);
@@ -573,19 +574,24 @@
{
struct yellowfin_private *yp = netdev_priv(dev);
void __iomem *ioaddr = yp->base;
- int i;
+ int i, ret;
/* Reset the chip. */
iowrite32(0x80000000, ioaddr + DMACtrl);
- i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
- if (i) return i;
+ ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+ if (ret)
+ return ret;
if (yellowfin_debug > 1)
printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
dev->name, dev->irq);
- yellowfin_init_ring(dev);
+ ret = yellowfin_init_ring(dev);
+ if (ret) {
+ free_irq(dev->irq, dev);
+ return ret;
+ }
iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
@@ -725,10 +731,10 @@
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void yellowfin_init_ring(struct net_device *dev)
+static int yellowfin_init_ring(struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
- int i;
+ int i, j;
yp->tx_full = 0;
yp->cur_rx = yp->cur_tx = 0;
@@ -753,6 +759,11 @@
yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
}
+ if (i != RX_RING_SIZE) {
+ for (j = 0; j < i; j++)
+ dev_kfree_skb(yp->rx_skbuff[j]);
+ return -ENOMEM;
+ }
yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
@@ -769,8 +780,6 @@
yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
#else
{
- int j;
-
/* Tx ring needs a pair of descriptors, the second for the status. */
for (i = 0; i < TX_RING_SIZE; i++) {
j = 2*i;
@@ -805,10 +814,11 @@
}
#endif
yp->tx_tail_desc = &yp->tx_status[0];
- return;
+ return 0;
}
-static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct yellowfin_private *yp = netdev_priv(dev);
unsigned entry;
@@ -830,7 +840,7 @@
if (skb_padto(skb, len)) {
yp->tx_skbuff[entry] = NULL;
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
}
}
@@ -884,7 +894,7 @@
printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
dev->name, yp->cur_tx, entry);
}
- return 0;
+ return NETDEV_TX_OK;
}
/* The interrupt handler does all of the Rx thread work and cleans up
@@ -1355,8 +1365,6 @@
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
if (data->phy_id == np->phys[0]) {
u16 value = data->val_in;
switch (data->reg_num) {
diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index 0a6992d..a0384b6 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -156,7 +156,8 @@
};
static int znet_open(struct net_device *dev);
-static int znet_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t znet_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t znet_interrupt(int irq, void *dev_id);
static void znet_rx(struct net_device *dev);
static int znet_close(struct net_device *dev);
@@ -534,7 +535,7 @@
netif_wake_queue (dev);
}
-static int znet_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t znet_send_packet(struct sk_buff *skb, struct net_device *dev)
{
int ioaddr = dev->base_addr;
struct znet_private *znet = netdev_priv(dev);
@@ -546,7 +547,7 @@
if (length < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
- return 0;
+ return NETDEV_TX_OK;
length = ETH_ZLEN;
}
@@ -600,7 +601,7 @@
printk(KERN_DEBUG "%s: Transmitter queued, length %d.\n", dev->name, length);
}
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* The ZNET interrupt handler. */
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 242257b..a7aae24 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -21,7 +21,6 @@
#include <linux/sched.h>
#include <linux/oprofile.h>
-#include <linux/vmalloc.h>
#include <linux/errno.h>
#include "event_buffer.h"
@@ -407,6 +406,21 @@
return op_cpu_buffer_add_data(entry, val);
}
+int oprofile_add_data64(struct op_entry *entry, u64 val)
+{
+ if (!entry->event)
+ return 0;
+ if (op_cpu_buffer_get_size(entry) < 2)
+ /*
+ * the function returns 0 to indicate a too small
+ * buffer, even if there is some space left
+ */
+ return 0;
+ if (!op_cpu_buffer_add_data(entry, (u32)val))
+ return 0;
+ return op_cpu_buffer_add_data(entry, (u32)(val >> 32));
+}
+
int oprofile_write_commit(struct op_entry *entry)
{
if (!entry->event)
diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c
index 3cffce9..dc8a042 100644
--- a/drivers/oprofile/oprof.c
+++ b/drivers/oprofile/oprof.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/moduleparam.h>
+#include <linux/workqueue.h>
+#include <linux/time.h>
#include <asm/mutex.h>
#include "oprof.h"
@@ -87,6 +89,69 @@
return err;
}
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void switch_worker(struct work_struct *work);
+static DECLARE_DELAYED_WORK(switch_work, switch_worker);
+
+static void start_switch_worker(void)
+{
+ if (oprofile_ops.switch_events)
+ schedule_delayed_work(&switch_work, oprofile_time_slice);
+}
+
+static void stop_switch_worker(void)
+{
+ cancel_delayed_work_sync(&switch_work);
+}
+
+static void switch_worker(struct work_struct *work)
+{
+ if (oprofile_ops.switch_events())
+ return;
+
+ atomic_inc(&oprofile_stats.multiplex_counter);
+ start_switch_worker();
+}
+
+/* User inputs in ms, converts to jiffies */
+int oprofile_set_timeout(unsigned long val_msec)
+{
+ int err = 0;
+ unsigned long time_slice;
+
+ mutex_lock(&start_mutex);
+
+ if (oprofile_started) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if (!oprofile_ops.switch_events) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ time_slice = msecs_to_jiffies(val_msec);
+ if (time_slice == MAX_JIFFY_OFFSET) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ oprofile_time_slice = time_slice;
+
+out:
+ mutex_unlock(&start_mutex);
+ return err;
+
+}
+
+#else
+
+static inline void start_switch_worker(void) { }
+static inline void stop_switch_worker(void) { }
+
+#endif
/* Actually start profiling (echo 1>/dev/oprofile/enable) */
int oprofile_start(void)
@@ -108,6 +173,8 @@
if ((err = oprofile_ops.start()))
goto out;
+ start_switch_worker();
+
oprofile_started = 1;
out:
mutex_unlock(&start_mutex);
@@ -123,6 +190,9 @@
goto out;
oprofile_ops.stop();
oprofile_started = 0;
+
+ stop_switch_worker();
+
/* wake up the daemon to read what remains */
wake_up_buffer_waiter();
out:
@@ -155,7 +225,6 @@
mutex_unlock(&start_mutex);
}
-
int oprofile_set_backtrace(unsigned long val)
{
int err = 0;
diff --git a/drivers/oprofile/oprof.h b/drivers/oprofile/oprof.h
index c288d3c..cb92f5c 100644
--- a/drivers/oprofile/oprof.h
+++ b/drivers/oprofile/oprof.h
@@ -24,6 +24,8 @@
extern unsigned long oprofile_buffer_size;
extern unsigned long oprofile_cpu_buffer_size;
extern unsigned long oprofile_buffer_watershed;
+extern unsigned long oprofile_time_slice;
+
extern struct oprofile_operations oprofile_ops;
extern unsigned long oprofile_started;
extern unsigned long oprofile_backtrace_depth;
@@ -35,5 +37,6 @@
void oprofile_timer_init(struct oprofile_operations *ops);
int oprofile_set_backtrace(unsigned long depth);
+int oprofile_set_timeout(unsigned long time);
#endif /* OPROF_H */
diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c
index 5d36ffc..bbd7516 100644
--- a/drivers/oprofile/oprofile_files.c
+++ b/drivers/oprofile/oprofile_files.c
@@ -9,6 +9,7 @@
#include <linux/fs.h>
#include <linux/oprofile.h>
+#include <linux/jiffies.h>
#include "event_buffer.h"
#include "oprofile_stats.h"
@@ -17,10 +18,51 @@
#define BUFFER_SIZE_DEFAULT 131072
#define CPU_BUFFER_SIZE_DEFAULT 8192
#define BUFFER_WATERSHED_DEFAULT 32768 /* FIXME: tune */
+#define TIME_SLICE_DEFAULT 1
unsigned long oprofile_buffer_size;
unsigned long oprofile_cpu_buffer_size;
unsigned long oprofile_buffer_watershed;
+unsigned long oprofile_time_slice;
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static ssize_t timeout_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ return oprofilefs_ulong_to_user(jiffies_to_msecs(oprofile_time_slice),
+ buf, count, offset);
+}
+
+
+static ssize_t timeout_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
+
+ if (*offset)
+ return -EINVAL;
+
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+
+ retval = oprofile_set_timeout(val);
+
+ if (retval)
+ return retval;
+ return count;
+}
+
+
+static const struct file_operations timeout_fops = {
+ .read = timeout_read,
+ .write = timeout_write,
+};
+
+#endif
+
static ssize_t depth_read(struct file *file, char __user *buf, size_t count, loff_t *offset)
{
@@ -129,6 +171,7 @@
oprofile_buffer_size = BUFFER_SIZE_DEFAULT;
oprofile_cpu_buffer_size = CPU_BUFFER_SIZE_DEFAULT;
oprofile_buffer_watershed = BUFFER_WATERSHED_DEFAULT;
+ oprofile_time_slice = msecs_to_jiffies(TIME_SLICE_DEFAULT);
oprofilefs_create_file(sb, root, "enable", &enable_fops);
oprofilefs_create_file_perm(sb, root, "dump", &dump_fops, 0666);
@@ -139,6 +182,9 @@
oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops);
oprofilefs_create_file(sb, root, "backtrace_depth", &depth_fops);
oprofilefs_create_file(sb, root, "pointer_size", &pointer_size_fops);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+ oprofilefs_create_file(sb, root, "time_slice", &timeout_fops);
+#endif
oprofile_create_stats_files(sb, root);
if (oprofile_ops.create_files)
oprofile_ops.create_files(sb, root);
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
index 3c2270a..61689e8 100644
--- a/drivers/oprofile/oprofile_stats.c
+++ b/drivers/oprofile/oprofile_stats.c
@@ -34,6 +34,7 @@
atomic_set(&oprofile_stats.sample_lost_no_mapping, 0);
atomic_set(&oprofile_stats.event_lost_overflow, 0);
atomic_set(&oprofile_stats.bt_lost_no_mapping, 0);
+ atomic_set(&oprofile_stats.multiplex_counter, 0);
}
@@ -76,4 +77,8 @@
&oprofile_stats.event_lost_overflow);
oprofilefs_create_ro_atomic(sb, dir, "bt_lost_no_mapping",
&oprofile_stats.bt_lost_no_mapping);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+ oprofilefs_create_ro_atomic(sb, dir, "multiplex_counter",
+ &oprofile_stats.multiplex_counter);
+#endif
}
diff --git a/drivers/oprofile/oprofile_stats.h b/drivers/oprofile/oprofile_stats.h
index 3da0d08..0b54e46 100644
--- a/drivers/oprofile/oprofile_stats.h
+++ b/drivers/oprofile/oprofile_stats.h
@@ -17,6 +17,7 @@
atomic_t sample_lost_no_mapping;
atomic_t bt_lost_no_mapping;
atomic_t event_lost_overflow;
+ atomic_t multiplex_counter;
};
extern struct oprofile_stat_struct oprofile_stats;
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index 4f5b871..4480364 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -55,15 +55,12 @@
return desc->irq_2_iommu;
}
-static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node)
+static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
{
struct irq_desc *desc;
struct irq_2_iommu *irq_iommu;
- /*
- * alloc irq desc if not allocated already.
- */
- desc = irq_to_desc_alloc_node(irq, node);
+ desc = irq_to_desc(irq);
if (!desc) {
printk(KERN_INFO "can not get irq_desc for %d\n", irq);
return NULL;
@@ -72,16 +69,11 @@
irq_iommu = desc->irq_2_iommu;
if (!irq_iommu)
- desc->irq_2_iommu = get_one_free_irq_2_iommu(node);
+ desc->irq_2_iommu = get_one_free_irq_2_iommu(irq_node(irq));
return desc->irq_2_iommu;
}
-static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
-{
- return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id));
-}
-
#else /* !CONFIG_SPARSE_IRQ */
static struct irq_2_iommu irq_2_iommuX[NR_IRQS];
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index e3a8721..e03fe98 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -598,6 +598,29 @@
}
/**
+ * pci_sriov_resource_alignment - get resource alignment for VF BAR
+ * @dev: the PCI device
+ * @resno: the resource number
+ *
+ * Returns the alignment of the VF BAR found in the SR-IOV capability.
+ * This is not the same as the resource size which is defined as
+ * the VF BAR size multiplied by the number of VFs. The alignment
+ * is just the VF BAR size.
+ */
+int pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
+{
+ struct resource tmp;
+ enum pci_bar_type type;
+ int reg = pci_iov_resource_bar(dev, resno, &type);
+
+ if (!reg)
+ return 0;
+
+ __pci_read_base(dev, type, &tmp, reg);
+ return resource_alignment(&tmp);
+}
+
+/**
* pci_restore_iov_state - restore the state of the IOV capability
* @dev: the PCI device
*/
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f73bcbe..5ff4d25 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -243,6 +243,7 @@
extern void pci_iov_release(struct pci_dev *dev);
extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
enum pci_bar_type *type);
+extern int pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
extern void pci_restore_iov_state(struct pci_dev *dev);
extern int pci_iov_bus_range(struct pci_bus *bus);
@@ -298,4 +299,16 @@
}
#endif /* CONFIG_PCI_IOV */
+static inline int pci_resource_alignment(struct pci_dev *dev,
+ struct resource *res)
+{
+#ifdef CONFIG_PCI_IOV
+ int resno = res - dev->resource;
+
+ if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
+ return pci_sriov_resource_alignment(dev, resno);
+#endif
+ return resource_alignment(res);
+}
+
#endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 06b9656..85ce239 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -992,7 +992,7 @@
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
- /* set sb600/sb700/sb800 sata to ahci mode */
+ /* set SBX00 SATA in IDE mode to AHCI mode */
u8 tmp;
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
@@ -1011,6 +1011,8 @@
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index b636e24..7c443b4 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -25,7 +25,7 @@
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
-
+#include "pci.h"
static void pbus_assign_resources_sorted(const struct pci_bus *bus)
{
@@ -384,7 +384,7 @@
continue;
r_size = resource_size(r);
/* For bridges size != alignment */
- align = resource_alignment(r);
+ align = pci_resource_alignment(dev, r);
order = __ffs(align) - 20;
if (order > 11) {
dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 1898c7b..88cdd1a 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -144,7 +144,7 @@
size = resource_size(res);
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
- align = resource_alignment(res);
+ align = pci_resource_alignment(dev, res);
/* First, try exact prefetching match.. */
ret = pci_bus_alloc_resource(bus, res, size, align, min,
@@ -178,7 +178,7 @@
struct pci_bus *bus;
int ret;
- align = resource_alignment(res);
+ align = pci_resource_alignment(dev, res);
if (!align) {
dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
"alignment) %pR flags %#lx\n",
@@ -259,7 +259,7 @@
if (!(r->flags) || r->parent)
continue;
- r_align = resource_alignment(r);
+ r_align = pci_resource_alignment(dev, r);
if (!r_align) {
dev_warn(&dev->dev, "BAR %d: bogus alignment "
"%pR flags %#lx\n",
@@ -271,7 +271,7 @@
struct resource_list *ln = list->next;
if (ln)
- align = resource_alignment(ln->res);
+ align = pci_resource_alignment(ln->dev, ln->res);
if (r_align > align) {
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 81d31ea..51c0a8b 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -335,6 +335,7 @@
if (hci_result != HCI_SUCCESS) {
/* Can't do anything useful */
mutex_unlock(&dev->mutex);
+ return;
}
new_rfk_state = value;
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 043b208..f215a59 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -270,7 +270,7 @@
acpi_status status;
struct acpi_object_list input;
union acpi_object params[3];
- char method[4] = "WM";
+ char method[5] = "WM";
if (!find_guid(guid_string, &wblock))
return AE_ERROR;
@@ -328,8 +328,8 @@
acpi_status status, wc_status = AE_ERROR;
struct acpi_object_list input, wc_input;
union acpi_object wc_params[1], wq_params[1];
- char method[4];
- char wc_method[4] = "WC";
+ char method[5];
+ char wc_method[5] = "WC";
if (!guid_string || !out)
return AE_BAD_PARAMETER;
@@ -410,7 +410,7 @@
acpi_handle handle;
struct acpi_object_list input;
union acpi_object params[2];
- char method[4] = "WS";
+ char method[5] = "WS";
if (!guid_string || !in)
return AE_BAD_DATA;
diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c
index 7e6b5a3..fc83783c 100644
--- a/drivers/pnp/pnpbios/bioscalls.c
+++ b/drivers/pnp/pnpbios/bioscalls.c
@@ -55,12 +55,13 @@
#define Q2_SET_SEL(cpu, selname, address, size) \
do { \
-struct desc_struct *gdt = get_cpu_gdt_table((cpu)); \
-set_base(gdt[(selname) >> 3], (u32)(address)); \
-set_limit(gdt[(selname) >> 3], size); \
+ struct desc_struct *gdt = get_cpu_gdt_table((cpu)); \
+ set_desc_base(&gdt[(selname) >> 3], (u32)(address)); \
+ set_desc_limit(&gdt[(selname) >> 3], (size) - 1); \
} while(0)
-static struct desc_struct bad_bios_desc;
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092,
+ (unsigned long)__va(0x400UL), PAGE_SIZE - 0x400 - 1);
/*
* At some point we want to use this stack frame pointer to unwind
@@ -476,19 +477,15 @@
pnp_bios_callpoint.offset = header->fields.pm16offset;
pnp_bios_callpoint.segment = PNP_CS16;
- bad_bios_desc.a = 0;
- bad_bios_desc.b = 0x00409200;
-
- set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
- _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
for_each_possible_cpu(i) {
struct desc_struct *gdt = get_cpu_gdt_table(i);
if (!gdt)
continue;
- set_base(gdt[GDT_ENTRY_PNPBIOS_CS32], &pnp_bios_callfunc);
- set_base(gdt[GDT_ENTRY_PNPBIOS_CS16],
- __va(header->fields.pm16cseg));
- set_base(gdt[GDT_ENTRY_PNPBIOS_DS],
- __va(header->fields.pm16dseg));
+ set_desc_base(&gdt[GDT_ENTRY_PNPBIOS_CS32],
+ (unsigned long)&pnp_bios_callfunc);
+ set_desc_base(&gdt[GDT_ENTRY_PNPBIOS_CS16],
+ (unsigned long)__va(header->fields.pm16cseg));
+ set_desc_base(&gdt[GDT_ENTRY_PNPBIOS_DS],
+ (unsigned long)__va(header->fields.pm16dseg));
}
}
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c
index ac8cc8c..fea17e7 100644
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -244,7 +244,7 @@
}
pps->dev = device_create(pps_class, pps->info.dev, pps->devno, NULL,
"pps%d", pps->id);
- if (err)
+ if (IS_ERR(pps->dev))
goto del_cdev;
dev_set_drvdata(pps->dev, pps);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 7498366..e109da4 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -669,14 +669,14 @@
* memory and 2) dasd_smalloc_request uses the static ccw memory
* that gets allocated for each device.
*/
-struct dasd_ccw_req *dasd_kmalloc_request(char *magic, int cplength,
+struct dasd_ccw_req *dasd_kmalloc_request(int magic, int cplength,
int datasize,
struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
/* Sanity checks */
- BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ BUG_ON(datasize > PAGE_SIZE ||
(cplength*sizeof(struct ccw1)) > PAGE_SIZE);
cqr = kzalloc(sizeof(struct dasd_ccw_req), GFP_ATOMIC);
@@ -700,14 +700,13 @@
return ERR_PTR(-ENOMEM);
}
}
- strncpy((char *) &cqr->magic, magic, 4);
- ASCEBC((char *) &cqr->magic, 4);
+ cqr->magic = magic;
set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
}
-struct dasd_ccw_req *dasd_smalloc_request(char *magic, int cplength,
+struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength,
int datasize,
struct dasd_device *device)
{
@@ -717,7 +716,7 @@
int size;
/* Sanity checks */
- BUG_ON( magic == NULL || datasize > PAGE_SIZE ||
+ BUG_ON(datasize > PAGE_SIZE ||
(cplength*sizeof(struct ccw1)) > PAGE_SIZE);
size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
@@ -744,8 +743,7 @@
cqr->data = data;
memset(cqr->data, 0, datasize);
}
- strncpy((char *) &cqr->magic, magic, 4);
- ASCEBC((char *) &cqr->magic, 4);
+ cqr->magic = magic;
set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
@@ -899,9 +897,6 @@
switch (rc) {
case 0:
cqr->status = DASD_CQR_IN_IO;
- DBF_DEV_EVENT(DBF_DEBUG, device,
- "start_IO: request %p started successful",
- cqr);
break;
case -EBUSY:
DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
@@ -1699,8 +1694,11 @@
* for that. State DASD_STATE_ONLINE is normal block device
* operation.
*/
- if (basedev->state < DASD_STATE_READY)
+ if (basedev->state < DASD_STATE_READY) {
+ while ((req = blk_fetch_request(block->request_queue)))
+ __blk_end_request_all(req, -EIO);
return;
+ }
/* Now we try to fetch requests from the request queue */
while (!blk_queue_plugged(queue) && (req = blk_peek_request(queue))) {
if (basedev->features & DASD_FEATURE_READONLY &&
@@ -2135,9 +2133,9 @@
struct dasd_device *base;
block = bdev->bd_disk->private_data;
- base = block->base;
if (!block)
return -ENODEV;
+ base = block->base;
if (!base->discipline ||
!base->discipline->fill_geometry)
@@ -2530,7 +2528,7 @@
static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
void *rdc_buffer,
int rdc_buffer_size,
- char *magic)
+ int magic)
{
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
@@ -2561,7 +2559,7 @@
}
-int dasd_generic_read_dev_chars(struct dasd_device *device, char *magic,
+int dasd_generic_read_dev_chars(struct dasd_device *device, int magic,
void *rdc_buffer, int rdc_buffer_size)
{
int ret;
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 27991b6..e8ff7b0 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -7,7 +7,7 @@
*
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/timer.h>
#include <linux/slab.h>
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 5b7bbc8..70a008c 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -5,7 +5,7 @@
* Author(s): Stefan Weinhuber <wein@de.ibm.com>
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/list.h>
#include <asm/ebcdic.h>
@@ -379,8 +379,7 @@
int rc;
unsigned long flags;
- cqr = dasd_kmalloc_request("ECKD",
- 1 /* PSF */ + 1 /* RSSD */ ,
+ cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */,
(sizeof(struct dasd_psf_prssd_data)),
device);
if (IS_ERR(cqr))
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 644086b..4e49b4a 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -8,7 +8,7 @@
*
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-diag"
#include <linux/stddef.h>
#include <linux/kernel.h>
@@ -523,8 +523,7 @@
/* Build the request */
datasize = sizeof(struct dasd_diag_req) +
count*sizeof(struct dasd_diag_bio);
- cqr = dasd_smalloc_request(dasd_diag_discipline.name, 0,
- datasize, memdev);
+ cqr = dasd_smalloc_request(DASD_DIAG_MAGIC, 0, datasize, memdev);
if (IS_ERR(cqr))
return cqr;
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index c11770f..a1ce573 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -10,7 +10,7 @@
* Author.........: Nigel Hislop <hislop_nigel@emc.com>
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/stddef.h>
#include <linux/kernel.h>
@@ -730,7 +730,8 @@
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
- cqr = dasd_smalloc_request("ECKD", 1 /* RCD */, ciw->count, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* RCD */, ciw->count,
+ device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
@@ -934,8 +935,7 @@
struct dasd_eckd_private *private;
private = (struct dasd_eckd_private *) device->private;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1 /* PSF */ + 1 /* RSSD */ ,
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */,
(sizeof(struct dasd_psf_prssd_data) +
sizeof(struct dasd_rssd_features)),
device);
@@ -998,7 +998,7 @@
struct dasd_psf_ssc_data *psf_ssc_data;
struct ccw1 *ccw;
- cqr = dasd_smalloc_request("ECKD", 1 /* PSF */ ,
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ ,
sizeof(struct dasd_psf_ssc_data),
device);
@@ -1149,8 +1149,8 @@
goto out_err3;
/* Read Device Characteristics */
- rc = dasd_generic_read_dev_chars(device, "ECKD", &private->rdc_data,
- 64);
+ rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
+ &private->rdc_data, 64);
if (rc) {
DBF_EVENT(DBF_WARNING,
"Read device characteristics failed, rc=%d for "
@@ -1217,8 +1217,7 @@
cplength = 8;
datasize = sizeof(struct DE_eckd_data) + 2*sizeof(struct LO_eckd_data);
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
@@ -1499,8 +1498,7 @@
return ERR_PTR(-EINVAL);
}
/* Allocate the format ccw request. */
- fcp = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, device);
+ fcp = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device);
if (IS_ERR(fcp))
return fcp;
@@ -1783,8 +1781,8 @@
datasize += count*sizeof(struct LO_eckd_data);
}
/* Allocate the ccw request. */
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, startdev);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize,
+ startdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
@@ -1948,8 +1946,8 @@
cidaw * sizeof(unsigned long long);
/* Allocate the ccw request. */
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- cplength, datasize, startdev);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize,
+ startdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
@@ -2249,8 +2247,7 @@
/* Allocate the ccw request. */
itcw_size = itcw_calc_size(0, ctidaw, 0);
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 0, itcw_size, startdev);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev);
if (IS_ERR(cqr))
return cqr;
@@ -2557,8 +2554,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1, 32, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
@@ -2600,8 +2596,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1, 32, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
@@ -2642,8 +2637,7 @@
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1, 32, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
@@ -2681,8 +2675,7 @@
struct ccw1 *ccw;
int rc;
- cqr = dasd_smalloc_request(dasd_eckd_discipline.name,
- 1 /* PSF */ + 1 /* RSSD */ ,
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */,
(sizeof(struct dasd_psf_prssd_data) +
sizeof(struct dasd_rssd_perf_stats_t)),
device);
@@ -2828,7 +2821,7 @@
}
/* setup CCWs for PSF + RSSD */
- cqr = dasd_smalloc_request("ECKD", 2 , 0, device);
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device);
if (IS_ERR(cqr)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Could not allocate initialization request");
@@ -3254,7 +3247,7 @@
/* Read Device Characteristics */
memset(&private->rdc_data, 0, sizeof(private->rdc_data));
- rc = dasd_generic_read_dev_chars(device, "ECKD",
+ rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
&private->rdc_data, 64);
if (rc) {
DBF_EVENT(DBF_WARNING,
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index c24c8c3..d96039e 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -6,7 +6,7 @@
* Author(s): Stefan Weinhuber <wein@de.ibm.com>
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-eckd"
#include <linux/init.h>
#include <linux/fs.h>
@@ -464,7 +464,7 @@
if (!device->discipline || strcmp(device->discipline->name, "ECKD"))
return -EPERM; /* FIXME: -EMEDIUMTYPE ? */
- cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
+ cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* SNSS */,
SNSS_DATA_SIZE, device);
if (IS_ERR(cqr))
return -ENOMEM;
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index cb8f9ce..7656384 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -99,8 +99,8 @@
cqr->lpm = LPM_ANYPATH;
cqr->status = DASD_CQR_FILLED;
} else {
- dev_err(&device->cdev->dev,
- "default ERP has run out of retries and failed\n");
+ pr_err("%s: default ERP has run out of retries and failed\n",
+ dev_name(&device->cdev->dev));
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_clock();
}
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index 31849ad..f245377 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -5,7 +5,7 @@
* Copyright IBM Corp. 1999, 2009
*/
-#define KMSG_COMPONENT "dasd"
+#define KMSG_COMPONENT "dasd-fba"
#include <linux/stddef.h>
#include <linux/kernel.h>
@@ -152,8 +152,8 @@
block->base = device;
/* Read Device Characteristics */
- rc = dasd_generic_read_dev_chars(device, "FBA ", &private->rdc_data,
- 32);
+ rc = dasd_generic_read_dev_chars(device, DASD_FBA_MAGIC,
+ &private->rdc_data, 32);
if (rc) {
DBF_EVENT(DBF_WARNING, "Read device characteristics returned "
"error %d for device: %s",
@@ -305,8 +305,7 @@
datasize += (count - 1)*sizeof(struct LO_fba_data);
}
/* Allocate the ccw request. */
- cqr = dasd_smalloc_request(dasd_fba_discipline.name,
- cplength, datasize, memdev);
+ cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index b699ca3..5e47a1e 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -59,6 +59,11 @@
#include <asm/dasd.h>
#include <asm/idals.h>
+/* DASD discipline magic */
+#define DASD_ECKD_MAGIC 0xC5C3D2C4
+#define DASD_DIAG_MAGIC 0xC4C9C1C7
+#define DASD_FBA_MAGIC 0xC6C2C140
+
/*
* SECTION: Type definitions
*/
@@ -540,9 +545,9 @@
extern struct kmem_cache *dasd_page_cache;
struct dasd_ccw_req *
-dasd_kmalloc_request(char *, int, int, struct dasd_device *);
+dasd_kmalloc_request(int , int, int, struct dasd_device *);
struct dasd_ccw_req *
-dasd_smalloc_request(char *, int, int, struct dasd_device *);
+dasd_smalloc_request(int , int, int, struct dasd_device *);
void dasd_kfree_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_sfree_request(struct dasd_ccw_req *, struct dasd_device *);
@@ -587,7 +592,7 @@
int dasd_generic_pm_freeze(struct ccw_device *);
int dasd_generic_restore_device(struct ccw_device *);
-int dasd_generic_read_dev_chars(struct dasd_device *, char *, void *, int);
+int dasd_generic_read_dev_chars(struct dasd_device *, int, void *, int);
char *dasd_get_sense(struct irb *);
/* externals in dasd_devmap.c */
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index df918ef..f756a1b 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -98,8 +98,8 @@
if (!capable (CAP_SYS_ADMIN))
return -EACCES;
- dev_info(&base->cdev->dev, "The DASD has been put in the quiesce "
- "state\n");
+ pr_info("%s: The DASD has been put in the quiesce "
+ "state\n", dev_name(&base->cdev->dev));
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
base->stopped |= DASD_STOPPED_QUIESCE;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
@@ -119,8 +119,8 @@
if (!capable (CAP_SYS_ADMIN))
return -EACCES;
- dev_info(&base->cdev->dev, "I/O operations have been resumed "
- "on the DASD\n");
+ pr_info("%s: I/O operations have been resumed "
+ "on the DASD\n", dev_name(&base->cdev->dev));
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
base->stopped &= ~DASD_STOPPED_QUIESCE;
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
@@ -146,8 +146,8 @@
return -EPERM;
if (base->state != DASD_STATE_BASIC) {
- dev_warn(&base->cdev->dev,
- "The DASD cannot be formatted while it is enabled\n");
+ pr_warning("%s: The DASD cannot be formatted while it is "
+ "enabled\n", dev_name(&base->cdev->dev));
return -EBUSY;
}
@@ -175,9 +175,9 @@
dasd_sfree_request(cqr, cqr->memdev);
if (rc) {
if (rc != -ERESTARTSYS)
- dev_err(&base->cdev->dev,
- "Formatting unit %d failed with "
- "rc=%d\n", fdata->start_unit, rc);
+ pr_err("%s: Formatting unit %d failed with "
+ "rc=%d\n", dev_name(&base->cdev->dev),
+ fdata->start_unit, rc);
return rc;
}
fdata->start_unit++;
@@ -204,9 +204,9 @@
if (copy_from_user(&fdata, argp, sizeof(struct format_data_t)))
return -EFAULT;
if (bdev != bdev->bd_contains) {
- dev_warn(&block->base->cdev->dev,
- "The specified DASD is a partition and cannot be "
- "formatted\n");
+ pr_warning("%s: The specified DASD is a partition and cannot "
+ "be formatted\n",
+ dev_name(&block->base->cdev->dev));
return -EINVAL;
}
return dasd_format(block, &fdata);
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index db442cd..ee604e9 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -42,7 +42,6 @@
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
-#include <asm/checksum.h>
#define XPRAM_NAME "xpram"
#define XPRAM_DEVS 1 /* one partition */
@@ -51,7 +50,6 @@
typedef struct {
unsigned int size; /* size of xpram segment in pages */
unsigned int offset; /* start page of xpram segment */
- unsigned int csum; /* partition checksum for suspend */
} xpram_device_t;
static xpram_device_t xpram_devices[XPRAM_MAX_DEVS];
@@ -387,58 +385,6 @@
}
/*
- * Save checksums for all partitions.
- */
-static int xpram_save_checksums(void)
-{
- unsigned long mem_page;
- int rc, i;
-
- rc = 0;
- mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
- if (!mem_page)
- return -ENOMEM;
- for (i = 0; i < xpram_devs; i++) {
- rc = xpram_page_in(mem_page, xpram_devices[i].offset);
- if (rc)
- goto fail;
- xpram_devices[i].csum = csum_partial((const void *) mem_page,
- PAGE_SIZE, 0);
- }
-fail:
- free_page(mem_page);
- return rc ? -ENXIO : 0;
-}
-
-/*
- * Verify checksums for all partitions.
- */
-static int xpram_validate_checksums(void)
-{
- unsigned long mem_page;
- unsigned int csum;
- int rc, i;
-
- rc = 0;
- mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
- if (!mem_page)
- return -ENOMEM;
- for (i = 0; i < xpram_devs; i++) {
- rc = xpram_page_in(mem_page, xpram_devices[i].offset);
- if (rc)
- goto fail;
- csum = csum_partial((const void *) mem_page, PAGE_SIZE, 0);
- if (xpram_devices[i].csum != csum) {
- rc = -EINVAL;
- goto fail;
- }
- }
-fail:
- free_page(mem_page);
- return rc ? -ENXIO : 0;
-}
-
-/*
* Resume failed: Print error message and call panic.
*/
static void xpram_resume_error(const char *message)
@@ -458,21 +404,10 @@
xpram_resume_error("xpram disappeared");
if (xpram_pages != xpram_highest_page_index() + 1)
xpram_resume_error("Size of xpram changed");
- if (xpram_validate_checksums())
- xpram_resume_error("Data of xpram changed");
return 0;
}
-/*
- * Save necessary state in suspend.
- */
-static int xpram_freeze(struct device *dev)
-{
- return xpram_save_checksums();
-}
-
static struct dev_pm_ops xpram_pm_ops = {
- .freeze = xpram_freeze,
.restore = xpram_restore,
};
diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig
index 0769ced..4e34d36 100644
--- a/drivers/s390/char/Kconfig
+++ b/drivers/s390/char/Kconfig
@@ -82,6 +82,16 @@
You should only select this option if you know what you are doing,
need this feature and intend to run your kernel in LPAR.
+config SCLP_ASYNC
+ tristate "Support for Call Home via Asynchronous SCLP Records"
+ depends on S390
+ help
+ This option enables the call home function, which is able to inform
+ the service element and connected organisations about a kernel panic.
+ You should only select this option if you know what you are doing,
+ want for inform other people about your kernel panics,
+ need this feature and intend to run your kernel in LPAR.
+
config S390_TAPE
tristate "S/390 tape device support"
depends on CCW
diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile
index 7e73e39..efb500a 100644
--- a/drivers/s390/char/Makefile
+++ b/drivers/s390/char/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_SCLP_CONSOLE) += sclp_con.o
obj-$(CONFIG_SCLP_VT220_TTY) += sclp_vt220.o
obj-$(CONFIG_SCLP_CPI) += sclp_cpi.o
+obj-$(CONFIG_SCLP_ASYNC) += sclp_async.o
obj-$(CONFIG_ZVM_WATCHDOG) += vmwatchdog.o
obj-$(CONFIG_VMLOGRDR) += vmlogrdr.o
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 3234e90..89ece1c 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -581,7 +581,7 @@
monreader_device->release = (void (*)(struct device *))kfree;
rc = device_register(monreader_device);
if (rc) {
- kfree(monreader_device);
+ put_device(monreader_device);
goto out_driver;
}
diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h
index 60e7cb0..6bb5a6b 100644
--- a/drivers/s390/char/sclp.h
+++ b/drivers/s390/char/sclp.h
@@ -27,6 +27,7 @@
#define EVTYP_VT220MSG 0x1A
#define EVTYP_CONFMGMDATA 0x04
#define EVTYP_SDIAS 0x1C
+#define EVTYP_ASYNC 0x0A
#define EVTYP_OPCMD_MASK 0x80000000
#define EVTYP_MSG_MASK 0x40000000
@@ -38,6 +39,7 @@
#define EVTYP_VT220MSG_MASK 0x00000040
#define EVTYP_CONFMGMDATA_MASK 0x10000000
#define EVTYP_SDIAS_MASK 0x00000010
+#define EVTYP_ASYNC_MASK 0x00400000
#define GNRLMSGFLGS_DOM 0x8000
#define GNRLMSGFLGS_SNDALRM 0x4000
@@ -85,12 +87,12 @@
} __attribute__((packed));
extern u64 sclp_facilities;
-
#define SCLP_HAS_CHP_INFO (sclp_facilities & 0x8000000000000000ULL)
#define SCLP_HAS_CHP_RECONFIG (sclp_facilities & 0x2000000000000000ULL)
#define SCLP_HAS_CPU_INFO (sclp_facilities & 0x0800000000000000ULL)
#define SCLP_HAS_CPU_RECONFIG (sclp_facilities & 0x0400000000000000ULL)
+
struct gds_subvector {
u8 length;
u8 key;
diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c
new file mode 100644
index 0000000..daaec18
--- /dev/null
+++ b/drivers/s390/char/sclp_async.c
@@ -0,0 +1,224 @@
+/*
+ * Enable Asynchronous Notification via SCLP.
+ *
+ * Copyright IBM Corp. 2009
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/kmod.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+#include <linux/utsname.h>
+#include "sclp.h"
+
+static int callhome_enabled;
+static struct sclp_req *request;
+static struct sclp_async_sccb *sccb;
+static int sclp_async_send_wait(char *message);
+static struct ctl_table_header *callhome_sysctl_header;
+static DEFINE_SPINLOCK(sclp_async_lock);
+static char nodename[64];
+#define SCLP_NORMAL_WRITE 0x00
+
+struct async_evbuf {
+ struct evbuf_header header;
+ u64 reserved;
+ u8 rflags;
+ u8 empty;
+ u8 rtype;
+ u8 otype;
+ char comp_id[12];
+ char data[3000]; /* there is still some space left */
+} __attribute__((packed));
+
+struct sclp_async_sccb {
+ struct sccb_header header;
+ struct async_evbuf evbuf;
+} __attribute__((packed));
+
+static struct sclp_register sclp_async_register = {
+ .send_mask = EVTYP_ASYNC_MASK,
+};
+
+static int call_home_on_panic(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ strncat(data, nodename, strlen(nodename));
+ sclp_async_send_wait(data);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block call_home_panic_nb = {
+ .notifier_call = call_home_on_panic,
+ .priority = INT_MAX,
+};
+
+static int proc_handler_callhome(ctl_table *ctl, int write, struct file *filp,
+ void __user *buffer, size_t *count,
+ loff_t *ppos)
+{
+ unsigned long val;
+ int len, rc;
+ char buf[2];
+
+ if (!*count | (*ppos && !write)) {
+ *count = 0;
+ return 0;
+ }
+ if (!write) {
+ len = sprintf(buf, "%d\n", callhome_enabled);
+ buf[len] = '\0';
+ rc = copy_to_user(buffer, buf, sizeof(buf));
+ if (rc != 0)
+ return -EFAULT;
+ } else {
+ len = *count;
+ rc = copy_from_user(buf, buffer, sizeof(buf));
+ if (rc != 0)
+ return -EFAULT;
+ if (strict_strtoul(buf, 0, &val) != 0)
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+ callhome_enabled = val;
+ }
+ *count = len;
+ *ppos += len;
+ return 0;
+}
+
+static struct ctl_table callhome_table[] = {
+ {
+ .procname = "callhome",
+ .mode = 0644,
+ .proc_handler = &proc_handler_callhome,
+ },
+ { .ctl_name = 0 }
+};
+
+static struct ctl_table kern_dir_table[] = {
+ {
+ .ctl_name = CTL_KERN,
+ .procname = "kernel",
+ .maxlen = 0,
+ .mode = 0555,
+ .child = callhome_table,
+ },
+ { .ctl_name = 0 }
+};
+
+/*
+ * Function used to transfer asynchronous notification
+ * records which waits for send completion
+ */
+static int sclp_async_send_wait(char *message)
+{
+ struct async_evbuf *evb;
+ int rc;
+ unsigned long flags;
+
+ if (!callhome_enabled)
+ return 0;
+ sccb->evbuf.header.type = EVTYP_ASYNC;
+ sccb->evbuf.rtype = 0xA5;
+ sccb->evbuf.otype = 0x00;
+ evb = &sccb->evbuf;
+ request->command = SCLP_CMDW_WRITE_EVENT_DATA;
+ request->sccb = sccb;
+ request->status = SCLP_REQ_FILLED;
+ strncpy(sccb->evbuf.data, message, sizeof(sccb->evbuf.data));
+ /*
+ * Retain Queue
+ * e.g. 5639CC140 500 Red Hat RHEL5 Linux for zSeries (RHEL AS)
+ */
+ strncpy(sccb->evbuf.comp_id, "000000000", sizeof(sccb->evbuf.comp_id));
+ sccb->evbuf.header.length = sizeof(sccb->evbuf);
+ sccb->header.length = sizeof(sccb->evbuf) + sizeof(sccb->header);
+ sccb->header.function_code = SCLP_NORMAL_WRITE;
+ rc = sclp_add_request(request);
+ if (rc)
+ return rc;
+ spin_lock_irqsave(&sclp_async_lock, flags);
+ while (request->status != SCLP_REQ_DONE &&
+ request->status != SCLP_REQ_FAILED) {
+ sclp_sync_wait();
+ }
+ spin_unlock_irqrestore(&sclp_async_lock, flags);
+ if (request->status != SCLP_REQ_DONE)
+ return -EIO;
+ rc = ((struct sclp_async_sccb *)
+ request->sccb)->header.response_code;
+ if (rc != 0x0020)
+ return -EIO;
+ if (evb->header.flags != 0x80)
+ return -EIO;
+ return rc;
+}
+
+static int __init sclp_async_init(void)
+{
+ int rc;
+
+ rc = sclp_register(&sclp_async_register);
+ if (rc)
+ return rc;
+ callhome_sysctl_header = register_sysctl_table(kern_dir_table);
+ if (!callhome_sysctl_header) {
+ rc = -ENOMEM;
+ goto out_sclp;
+ }
+ if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) {
+ rc = -EOPNOTSUPP;
+ goto out_sclp;
+ }
+ rc = -ENOMEM;
+ request = kzalloc(sizeof(struct sclp_req), GFP_KERNEL);
+ if (!request)
+ goto out_sys;
+ sccb = (struct sclp_async_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+ if (!sccb)
+ goto out_mem;
+ rc = atomic_notifier_chain_register(&panic_notifier_list,
+ &call_home_panic_nb);
+ if (rc)
+ goto out_mem;
+
+ strncpy(nodename, init_utsname()->nodename, 64);
+ return 0;
+
+out_mem:
+ kfree(request);
+ free_page((unsigned long) sccb);
+out_sys:
+ unregister_sysctl_table(callhome_sysctl_header);
+out_sclp:
+ sclp_unregister(&sclp_async_register);
+ return rc;
+
+}
+module_init(sclp_async_init);
+
+static void __exit sclp_async_exit(void)
+{
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &call_home_panic_nb);
+ unregister_sysctl_table(callhome_sysctl_header);
+ sclp_unregister(&sclp_async_register);
+ free_page((unsigned long) sccb);
+ kfree(request);
+}
+module_exit(sclp_async_exit);
+
+MODULE_AUTHOR("Copyright IBM Corp. 2009");
+MODULE_AUTHOR("Hans-Joachim Picht <hans@linux.vnet.ibm.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SCLP Asynchronous Notification Records");
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 5a519fa..2fe45ff 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -8,7 +8,7 @@
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
-#define KMSG_COMPONENT "tape"
+#define KMSG_COMPONENT "tape_34xx"
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 418f72d..e4cc3aa 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -8,7 +8,7 @@
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
-#define KMSG_COMPONENT "tape"
+#define KMSG_COMPONENT "tape_3590"
#include <linux/module.h>
#include <linux/init.h>
@@ -39,8 +39,6 @@
* - Read Alternate: implemented
*******************************************************************/
-#define KMSG_COMPONENT "tape"
-
static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = {
[0x00] = "",
[0x10] = "Lost Sense",
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 47ff695..4cb9e70 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -302,8 +302,6 @@
if (!device->blk_data.medium_changed)
return 0;
- dev_info(&device->cdev->dev, "Determining the size of the recorded "
- "area...\n");
rc = tape_mtop(device, MTFSFM, 1);
if (rc)
return rc;
@@ -312,6 +310,8 @@
if (rc < 0)
return rc;
+ pr_info("%s: Determining the size of the recorded area...\n",
+ dev_name(&device->cdev->dev));
DBF_LH(3, "Image file ends at %d\n", rc);
nr_of_blks = rc;
@@ -330,8 +330,8 @@
device->bof = rc;
nr_of_blks -= rc;
- dev_info(&device->cdev->dev, "The size of the recorded area is %i "
- "blocks\n", nr_of_blks);
+ pr_info("%s: The size of the recorded area is %i blocks\n",
+ dev_name(&device->cdev->dev), nr_of_blks);
set_capacity(device->blk_data.disk,
nr_of_blks*(TAPEBLOCK_HSEC_SIZE/512));
@@ -366,8 +366,8 @@
if (device->required_tapemarks) {
DBF_EVENT(2, "TBLOCK: missing tapemarks\n");
- dev_warn(&device->cdev->dev, "Opening the tape failed because"
- " of missing end-of-file marks\n");
+ pr_warning("%s: Opening the tape failed because of missing "
+ "end-of-file marks\n", dev_name(&device->cdev->dev));
rc = -EPERM;
goto put_device;
}
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 1d420d9..5cd31e0 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -214,13 +214,15 @@
switch(newstate){
case MS_UNLOADED:
device->tape_generic_status |= GMT_DR_OPEN(~0);
- dev_info(&device->cdev->dev, "The tape cartridge has been "
- "successfully unloaded\n");
+ if (device->medium_state == MS_LOADED)
+ pr_info("%s: The tape cartridge has been successfully "
+ "unloaded\n", dev_name(&device->cdev->dev));
break;
case MS_LOADED:
device->tape_generic_status &= ~GMT_DR_OPEN(~0);
- dev_info(&device->cdev->dev, "A tape cartridge has been "
- "mounted\n");
+ if (device->medium_state == MS_UNLOADED)
+ pr_info("%s: A tape cartridge has been mounted\n",
+ dev_name(&device->cdev->dev));
break;
default:
// print nothing
@@ -358,11 +360,11 @@
out_char:
tapechar_cleanup_device(device);
+out_minor:
+ tape_remove_minor(device);
out_discipline:
device->discipline->cleanup_device(device);
device->discipline = NULL;
-out_minor:
- tape_remove_minor(device);
out:
module_put(discipline->owner);
return rc;
@@ -654,8 +656,8 @@
*/
DBF_EVENT(3, "(%08x): Drive in use vanished!\n",
device->cdev_id);
- dev_warn(&device->cdev->dev, "A tape unit was detached"
- " while in use\n");
+ pr_warning("%s: A tape unit was detached while in "
+ "use\n", dev_name(&device->cdev->dev));
tape_state_set(device, TS_NOT_OPER);
__tape_discard_requests(device);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c
index 1a9420b..750354a 100644
--- a/drivers/s390/char/tape_std.c
+++ b/drivers/s390/char/tape_std.c
@@ -68,7 +68,7 @@
* to another host (actually this shouldn't happen but it does).
* So we set up a timeout for this call.
*/
- init_timer(&timeout);
+ init_timer_on_stack(&timeout);
timeout.function = tape_std_assign_timeout;
timeout.data = (unsigned long) request;
timeout.expires = jiffies + 2 * HZ;
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index c20a4fe..d1a142fa 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -765,8 +765,10 @@
} else
return -ENOMEM;
ret = device_register(dev);
- if (ret)
+ if (ret) {
+ put_device(dev);
return ret;
+ }
ret = sysfs_create_group(&dev->kobj, &vmlogrdr_attr_group);
if (ret) {
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 31b902e..77571b6 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -1026,9 +1026,15 @@
debug_set_level(vmur_dbf, 6);
+ vmur_class = class_create(THIS_MODULE, "vmur");
+ if (IS_ERR(vmur_class)) {
+ rc = PTR_ERR(vmur_class);
+ goto fail_free_dbf;
+ }
+
rc = ccw_driver_register(&ur_driver);
if (rc)
- goto fail_free_dbf;
+ goto fail_class_destroy;
rc = alloc_chrdev_region(&dev, 0, NUM_MINORS, "vmur");
if (rc) {
@@ -1038,18 +1044,13 @@
}
ur_first_dev_maj_min = MKDEV(MAJOR(dev), 0);
- vmur_class = class_create(THIS_MODULE, "vmur");
- if (IS_ERR(vmur_class)) {
- rc = PTR_ERR(vmur_class);
- goto fail_unregister_region;
- }
pr_info("%s loaded.\n", ur_banner);
return 0;
-fail_unregister_region:
- unregister_chrdev_region(ur_first_dev_maj_min, NUM_MINORS);
fail_unregister_driver:
ccw_driver_unregister(&ur_driver);
+fail_class_destroy:
+ class_destroy(vmur_class);
fail_free_dbf:
debug_unregister(vmur_dbf);
return rc;
@@ -1057,9 +1058,9 @@
static void __exit ur_exit(void)
{
- class_destroy(vmur_class);
unregister_chrdev_region(ur_first_dev_maj_min, NUM_MINORS);
ccw_driver_unregister(&ur_driver);
+ class_destroy(vmur_class);
debug_unregister(vmur_dbf);
pr_info("%s unloaded.\n", ur_banner);
}
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 1bbae43..c431198 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -275,7 +275,7 @@
u32 num_pages;
u32 pad1;
u64 tod;
- cpuid_t cpu_id;
+ struct cpuid cpu_id;
u32 arch_id;
u32 volnr;
u32 build_arch;
diff --git a/drivers/s390/cio/Makefile b/drivers/s390/cio/Makefile
index adb3dd3..fa4c966 100644
--- a/drivers/s390/cio/Makefile
+++ b/drivers/s390/cio/Makefile
@@ -2,7 +2,7 @@
# Makefile for the S/390 common i/o drivers
#
-obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o scsw.o \
+obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \
fcx.o itcw.o crw.o
ccw_device-objs += device.o device_fsm.o device_ops.o
ccw_device-objs += device_id.o device_pgid.o device_status.o
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 3e5f304..4000283 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -417,7 +417,8 @@
if (ret) {
CIO_MSG_EVENT(0, "Could not register chp%x.%02x: %d\n",
chpid.cssid, chpid.id, ret);
- goto out_free;
+ put_device(&chp->dev);
+ goto out;
}
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 425e8f8..37aa611 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -37,29 +37,6 @@
struct channel_path;
-struct css_general_char {
- u64 : 12;
- u32 dynio : 1; /* bit 12 */
- u32 : 28;
- u32 aif : 1; /* bit 41 */
- u32 : 3;
- u32 mcss : 1; /* bit 45 */
- u32 fcs : 1; /* bit 46 */
- u32 : 1;
- u32 ext_mb : 1; /* bit 48 */
- u32 : 7;
- u32 aif_tdd : 1; /* bit 56 */
- u32 : 1;
- u32 qebsm : 1; /* bit 58 */
- u32 : 8;
- u32 aif_osa : 1; /* bit 67 */
- u32 : 14;
- u32 cib : 1; /* bit 82 */
- u32 : 5;
- u32 fcx : 1; /* bit 88 */
- u32 : 7;
-}__attribute__((packed));
-
struct css_chsc_char {
u64 res;
u64 : 20;
@@ -72,7 +49,6 @@
u32 : 19;
}__attribute__((packed));
-extern struct css_general_char css_general_characteristics;
extern struct css_chsc_char css_chsc_characteristics;
struct chsc_ssd_info {
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 5ec7789..138124f 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -139,12 +139,11 @@
__u8 lpm, /* logical path mask */
__u8 key) /* storage key */
{
- char dbf_txt[15];
int ccode;
union orb *orb;
- CIO_TRACE_EVENT(4, "stIO");
- CIO_TRACE_EVENT(4, dev_name(&sch->dev));
+ CIO_TRACE_EVENT(5, "stIO");
+ CIO_TRACE_EVENT(5, dev_name(&sch->dev));
orb = &to_io_private(sch)->orb;
memset(orb, 0, sizeof(union orb));
@@ -169,8 +168,7 @@
ccode = ssch(sch->schid, orb);
/* process condition code */
- sprintf(dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT(4, dbf_txt);
+ CIO_HEX_EVENT(5, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
@@ -201,16 +199,14 @@
int
cio_resume (struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
- CIO_TRACE_EVENT (4, "resIO");
+ CIO_TRACE_EVENT(4, "resIO");
CIO_TRACE_EVENT(4, dev_name(&sch->dev));
ccode = rsch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (4, dbf_txt);
+ CIO_HEX_EVENT(4, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
@@ -235,13 +231,12 @@
int
cio_halt(struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
- CIO_TRACE_EVENT (2, "haltIO");
+ CIO_TRACE_EVENT(2, "haltIO");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
/*
@@ -249,8 +244,7 @@
*/
ccode = hsch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
@@ -270,13 +264,12 @@
int
cio_clear(struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
- CIO_TRACE_EVENT (2, "clearIO");
+ CIO_TRACE_EVENT(2, "clearIO");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
/*
@@ -284,8 +277,7 @@
*/
ccode = csch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ccode, sizeof(ccode));
switch (ccode) {
case 0:
@@ -306,19 +298,17 @@
int
cio_cancel (struct subchannel *sch)
{
- char dbf_txt[15];
int ccode;
if (!sch)
return -ENODEV;
- CIO_TRACE_EVENT (2, "cancelIO");
+ CIO_TRACE_EVENT(2, "cancelIO");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
ccode = xsch (sch->schid);
- sprintf (dbf_txt, "ccode:%d", ccode);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ccode, sizeof(ccode));
switch (ccode) {
case 0: /* success */
@@ -429,11 +419,10 @@
*/
int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
- char dbf_txt[15];
int retry;
int ret;
- CIO_TRACE_EVENT (2, "ensch");
+ CIO_TRACE_EVENT(2, "ensch");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
if (sch_is_pseudo_sch(sch))
@@ -460,8 +449,7 @@
} else
break;
}
- sprintf (dbf_txt, "ret:%d", ret);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
}
EXPORT_SYMBOL_GPL(cio_enable_subchannel);
@@ -472,11 +460,10 @@
*/
int cio_disable_subchannel(struct subchannel *sch)
{
- char dbf_txt[15];
int retry;
int ret;
- CIO_TRACE_EVENT (2, "dissch");
+ CIO_TRACE_EVENT(2, "dissch");
CIO_TRACE_EVENT(2, dev_name(&sch->dev));
if (sch_is_pseudo_sch(sch))
@@ -495,8 +482,7 @@
} else
break;
}
- sprintf (dbf_txt, "ret:%d", ret);
- CIO_TRACE_EVENT (2, dbf_txt);
+ CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
}
EXPORT_SYMBOL_GPL(cio_disable_subchannel);
@@ -578,11 +564,6 @@
goto out;
}
mutex_init(&sch->reg_mutex);
- /* Set a name for the subchannel */
- if (cio_is_console(schid))
- sch->dev.init_name = cio_get_console_sch_name(schid);
- else
- dev_set_name(&sch->dev, "0.%x.%04x", schid.ssid, schid.sch_no);
/*
* The first subchannel that is not-operational (ccode==3)
@@ -686,7 +667,6 @@
#ifdef CONFIG_CCW_CONSOLE
static struct subchannel console_subchannel;
-static char console_sch_name[10] = "0.x.xxxx";
static struct io_subchannel_private console_priv;
static int console_subchannel_in_use;
@@ -873,12 +853,6 @@
return &console_subchannel;
}
-const char *cio_get_console_sch_name(struct subchannel_id schid)
-{
- snprintf(console_sch_name, 10, "0.%x.%04x", schid.ssid, schid.sch_no);
- return (const char *)console_sch_name;
-}
-
#endif
static int
__disable_subchannel_easy(struct subchannel_id schid, struct schib *schib)
diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h
index 5150fba..2e43558 100644
--- a/drivers/s390/cio/cio.h
+++ b/drivers/s390/cio/cio.h
@@ -133,15 +133,11 @@
extern struct subchannel *cio_get_console_subchannel(void);
extern spinlock_t * cio_get_console_lock(void);
extern void *cio_get_console_priv(void);
-extern const char *cio_get_console_sch_name(struct subchannel_id schid);
-extern const char *cio_get_console_cdev_name(struct subchannel *sch);
#else
#define cio_is_console(schid) 0
#define cio_get_console_subchannel() NULL
#define cio_get_console_lock() NULL
#define cio_get_console_priv() NULL
-#define cio_get_console_sch_name(schid) NULL
-#define cio_get_console_cdev_name(sch) NULL
#endif
#endif
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 85d43c6..e995123 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -152,24 +152,15 @@
}
static void
-css_free_subchannel(struct subchannel *sch)
-{
- if (sch) {
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
- kfree(sch->lock);
- kfree(sch);
- }
-}
-
-static void
css_subchannel_release(struct device *dev)
{
struct subchannel *sch;
sch = to_subchannel(dev);
if (!cio_is_console(sch->schid)) {
+ /* Reset intparm to zeroes. */
+ sch->config.intparm = 0;
+ cio_commit_config(sch);
kfree(sch->lock);
kfree(sch);
}
@@ -180,6 +171,8 @@
int ret;
mutex_lock(&sch->reg_mutex);
+ dev_set_name(&sch->dev, "0.%x.%04x", sch->schid.ssid,
+ sch->schid.sch_no);
ret = device_register(&sch->dev);
mutex_unlock(&sch->reg_mutex);
return ret;
@@ -327,7 +320,7 @@
return PTR_ERR(sch);
ret = css_register_subchannel(sch);
if (ret)
- css_free_subchannel(sch);
+ put_device(&sch->dev);
return ret;
}
@@ -644,7 +637,10 @@
* not working) so we do it now. This is true e.g. for the
* console subchannel.
*/
- css_register_subchannel(sch);
+ if (css_register_subchannel(sch)) {
+ if (!cio_is_console(schid))
+ put_device(&sch->dev);
+ }
return 0;
}
@@ -661,8 +657,8 @@
css->global_pgid.pgid_high.cpu_addr = 0;
#endif
}
- css->global_pgid.cpu_id = ((cpuid_t *) __LC_CPUID)->ident;
- css->global_pgid.cpu_model = ((cpuid_t *) __LC_CPUID)->machine;
+ css->global_pgid.cpu_id = S390_lowcore.cpu_id.ident;
+ css->global_pgid.cpu_model = S390_lowcore.cpu_id.machine;
css->global_pgid.tod_high = tod_high;
}
@@ -920,8 +916,10 @@
goto out_device;
}
ret = device_register(&css->pseudo_subchannel->dev);
- if (ret)
+ if (ret) {
+ put_device(&css->pseudo_subchannel->dev);
goto out_file;
+ }
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 3c57c1a..0f95405 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -307,8 +307,11 @@
static void ccw_device_unregister(struct ccw_device *cdev)
{
- if (test_and_clear_bit(1, &cdev->private->registered))
+ if (test_and_clear_bit(1, &cdev->private->registered)) {
device_del(&cdev->dev);
+ /* Release reference from device_initialize(). */
+ put_device(&cdev->dev);
+ }
}
static void ccw_device_remove_orphan_cb(struct work_struct *work)
@@ -319,7 +322,6 @@
priv = container_of(work, struct ccw_device_private, kick_work);
cdev = priv->cdev;
ccw_device_unregister(cdev);
- put_device(&cdev->dev);
/* Release cdev reference for workqueue processing. */
put_device(&cdev->dev);
}
@@ -333,15 +335,15 @@
* Forced offline in disconnected state means
* 'throw away device'.
*/
- /* Get cdev reference for workqueue processing. */
- if (!get_device(&cdev->dev))
- return;
if (ccw_device_is_orphan(cdev)) {
/*
* Deregister ccw device.
* Unfortunately, we cannot do this directly from the
* attribute method.
*/
+ /* Get cdev reference for workqueue processing. */
+ if (!get_device(&cdev->dev))
+ return;
spin_lock_irqsave(cdev->ccwlock, flags);
cdev->private->state = DEV_STATE_NOT_OPER;
spin_unlock_irqrestore(cdev->ccwlock, flags);
@@ -380,30 +382,34 @@
}
cdev->online = 0;
spin_lock_irq(cdev->ccwlock);
- ret = ccw_device_offline(cdev);
- if (ret == -ENODEV) {
- if (cdev->private->state != DEV_STATE_NOT_OPER) {
- cdev->private->state = DEV_STATE_OFFLINE;
- dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
- }
+ /* Wait until a final state or DISCONNECTED is reached */
+ while (!dev_fsm_final_state(cdev) &&
+ cdev->private->state != DEV_STATE_DISCONNECTED) {
spin_unlock_irq(cdev->ccwlock);
- /* Give up reference from ccw_device_set_online(). */
- put_device(&cdev->dev);
- return ret;
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ spin_lock_irq(cdev->ccwlock);
}
+ ret = ccw_device_offline(cdev);
+ if (ret)
+ goto error;
spin_unlock_irq(cdev->ccwlock);
- if (ret == 0) {
- wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
- /* Give up reference from ccw_device_set_online(). */
- put_device(&cdev->dev);
- } else {
- CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
- "device 0.%x.%04x\n",
- ret, cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
- cdev->online = 1;
- }
- return ret;
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ /* Give up reference from ccw_device_set_online(). */
+ put_device(&cdev->dev);
+ return 0;
+
+error:
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, device 0.%x.%04x\n",
+ ret, cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ cdev->private->state = DEV_STATE_OFFLINE;
+ dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
+ spin_unlock_irq(cdev->ccwlock);
+ /* Give up reference from ccw_device_set_online(). */
+ put_device(&cdev->dev);
+ return -ENODEV;
}
/**
@@ -421,6 +427,7 @@
int ccw_device_set_online(struct ccw_device *cdev)
{
int ret;
+ int ret2;
if (!cdev)
return -ENODEV;
@@ -444,28 +451,53 @@
put_device(&cdev->dev);
return ret;
}
- if (cdev->private->state != DEV_STATE_ONLINE) {
+ spin_lock_irq(cdev->ccwlock);
+ /* Check if online processing was successful */
+ if ((cdev->private->state != DEV_STATE_ONLINE) &&
+ (cdev->private->state != DEV_STATE_W4SENSE)) {
+ spin_unlock_irq(cdev->ccwlock);
/* Give up online reference since onlining failed. */
put_device(&cdev->dev);
return -ENODEV;
}
- if (!cdev->drv->set_online || cdev->drv->set_online(cdev) == 0) {
- cdev->online = 1;
- return 0;
- }
- spin_lock_irq(cdev->ccwlock);
- ret = ccw_device_offline(cdev);
spin_unlock_irq(cdev->ccwlock);
- if (ret == 0)
- wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
- else
- CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
- "device 0.%x.%04x\n",
- ret, cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
+ if (cdev->drv->set_online)
+ ret = cdev->drv->set_online(cdev);
+ if (ret)
+ goto rollback;
+ cdev->online = 1;
+ return 0;
+
+rollback:
+ spin_lock_irq(cdev->ccwlock);
+ /* Wait until a final state or DISCONNECTED is reached */
+ while (!dev_fsm_final_state(cdev) &&
+ cdev->private->state != DEV_STATE_DISCONNECTED) {
+ spin_unlock_irq(cdev->ccwlock);
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
+ spin_lock_irq(cdev->ccwlock);
+ }
+ ret2 = ccw_device_offline(cdev);
+ if (ret2)
+ goto error;
+ spin_unlock_irq(cdev->ccwlock);
+ wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
+ cdev->private->state == DEV_STATE_DISCONNECTED));
/* Give up online reference since onlining failed. */
put_device(&cdev->dev);
- return (ret == 0) ? -ENODEV : ret;
+ return ret;
+
+error:
+ CIO_MSG_EVENT(0, "rollback ccw_device_offline returned %d, "
+ "device 0.%x.%04x\n",
+ ret2, cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ cdev->private->state = DEV_STATE_OFFLINE;
+ spin_unlock_irq(cdev->ccwlock);
+ /* Give up online reference since onlining failed. */
+ put_device(&cdev->dev);
+ return ret;
}
static int online_store_handle_offline(struct ccw_device *cdev)
@@ -637,8 +669,12 @@
int ret;
dev->bus = &ccw_bus_type;
-
- if ((ret = device_add(dev)))
+ ret = dev_set_name(&cdev->dev, "0.%x.%04x", cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ if (ret)
+ return ret;
+ ret = device_add(dev);
+ if (ret)
return ret;
set_bit(1, &cdev->private->registered);
@@ -772,10 +808,8 @@
cdev = io_subchannel_allocate_dev(sch);
if (!IS_ERR(cdev)) {
ret = io_subchannel_initialize_dev(sch, cdev);
- if (ret) {
- kfree(cdev);
+ if (ret)
cdev = ERR_PTR(ret);
- }
}
return cdev;
}
@@ -1026,9 +1060,6 @@
return;
sch = to_subchannel(cdev->dev.parent);
css_sch_device_unregister(sch);
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
/* Release cdev reference for workqueue processing.*/
put_device(&cdev->dev);
/* Release subchannel reference for local processing. */
@@ -1037,6 +1068,9 @@
void ccw_device_schedule_sch_unregister(struct ccw_device *cdev)
{
+ /* Get cdev reference for workqueue processing. */
+ if (!get_device(&cdev->dev))
+ return;
PREPARE_WORK(&cdev->private->kick_work,
ccw_device_call_sch_unregister);
queue_work(slow_path_wq, &cdev->private->kick_work);
@@ -1057,9 +1091,6 @@
/* Device did not respond in time. */
case DEV_STATE_NOT_OPER:
cdev->private->flags.recog_done = 1;
- /* Remove device found not operational. */
- if (!get_device(&cdev->dev))
- break;
ccw_device_schedule_sch_unregister(cdev);
if (atomic_dec_and_test(&ccw_device_init_count))
wake_up(&ccw_device_init_wq);
@@ -1097,13 +1128,6 @@
init_waitqueue_head(&priv->wait_q);
init_timer(&priv->timer);
- /* Set an initial name for the device. */
- if (cio_is_console(sch->schid))
- cdev->dev.init_name = cio_get_console_cdev_name(sch);
- else
- dev_set_name(&cdev->dev, "0.%x.%04x",
- sch->schid.ssid, sch->schib.pmcw.dev);
-
/* Increase counter of devices currently in recognition. */
atomic_inc(&ccw_device_init_count);
@@ -1173,8 +1197,8 @@
cdev = sch_get_cdev(sch);
- CIO_TRACE_EVENT(3, "IRQ");
- CIO_TRACE_EVENT(3, dev_name(&sch->dev));
+ CIO_TRACE_EVENT(6, "IRQ");
+ CIO_TRACE_EVENT(6, dev_name(&sch->dev));
if (cdev)
dev_fsm_event(cdev, DEV_EVENT_INTERRUPT);
}
@@ -1212,9 +1236,6 @@
sch = container_of(work, struct subchannel, work);
css_sch_device_unregister(sch);
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
put_device(&sch->dev);
}
@@ -1336,7 +1357,6 @@
cdev->private->state = DEV_STATE_NOT_OPER;
spin_unlock_irqrestore(cdev->ccwlock, flags);
ccw_device_unregister(cdev);
- put_device(&cdev->dev);
kfree(sch->private);
sysfs_remove_group(&sch->dev.kobj, &io_subchannel_attr_group);
return 0;
@@ -1573,8 +1593,6 @@
spin_unlock_irq(cdev->ccwlock);
if (!unreg)
goto out;
- if (!get_device(&cdev->dev))
- goto out;
CIO_MSG_EVENT(3, "ccw: purging 0.%x.%04x\n", priv->dev_id.ssid,
priv->dev_id.devno);
ccw_device_schedule_sch_unregister(cdev);
@@ -1690,10 +1708,6 @@
spin_unlock_irqrestore(sch->lock, flags);
css_sch_device_unregister(sch);
spin_lock_irqsave(sch->lock, flags);
-
- /* Reset intparm to zeroes. */
- sch->config.intparm = 0;
- cio_commit_config(sch);
break;
case REPROBE:
ccw_device_trigger_reprobe(cdev);
@@ -1714,7 +1728,6 @@
#ifdef CONFIG_CCW_CONSOLE
static struct ccw_device console_cdev;
-static char console_cdev_name[10] = "0.x.xxxx";
static struct ccw_device_private console_private;
static int console_cdev_in_use;
@@ -1798,13 +1811,6 @@
return ccw_device_pm_restore(&console_cdev.dev);
}
EXPORT_SYMBOL_GPL(ccw_device_force_console);
-
-const char *cio_get_console_cdev_name(struct subchannel *sch)
-{
- snprintf(console_cdev_name, 10, "0.%x.%04x",
- sch->schid.ssid, sch->schib.pmcw.dev);
- return (const char *)console_cdev_name;
-}
#endif
/*
@@ -2022,7 +2028,9 @@
spin_unlock_irq(sch->lock);
if (ret) {
CIO_MSG_EVENT(0, "Couldn't start recognition for device "
- "%s (ret=%d)\n", dev_name(&cdev->dev), ret);
+ "0.%x.%04x (ret=%d)\n",
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
spin_lock_irq(sch->lock);
cdev->private->state = DEV_STATE_DISCONNECTED;
spin_unlock_irq(sch->lock);
@@ -2085,8 +2093,9 @@
}
/* check if the device id has changed */
if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
- CIO_MSG_EVENT(0, "resume: sch %s: failed (devno changed from "
- "%04x to %04x)\n", dev_name(&sch->dev),
+ CIO_MSG_EVENT(0, "resume: sch 0.%x.%04x: failed (devno "
+ "changed from %04x to %04x)\n",
+ sch->schid.ssid, sch->schid.sch_no,
cdev->private->dev_id.devno,
sch->schib.pmcw.dev);
goto out_unreg_unlock;
@@ -2119,8 +2128,9 @@
if (cm_enabled) {
ret = ccw_set_cmf(cdev, 1);
if (ret) {
- CIO_MSG_EVENT(2, "resume: cdev %s: cmf failed "
- "(rc=%d)\n", dev_name(&cdev->dev), ret);
+ CIO_MSG_EVENT(2, "resume: cdev 0.%x.%04x: cmf failed "
+ "(rc=%d)\n", cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
ret = 0;
}
}
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 3db88c5..e728ce4 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -394,6 +394,13 @@
ccw_device_schedule_sch_unregister(cdev);
cdev->private->flags.donotify = 0;
}
+ if (state == DEV_STATE_NOT_OPER) {
+ CIO_MSG_EVENT(0, "Device %04x gone on subchannel %04x\n",
+ cdev->private->dev_id.devno, sch->schid.sch_no);
+ if (!ccw_device_notify(cdev, CIO_GONE))
+ ccw_device_schedule_sch_unregister(cdev);
+ cdev->private->flags.donotify = 0;
+ }
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
@@ -731,6 +738,17 @@
}
/*
+ * Handle path verification event in offline state.
+ */
+static void ccw_device_offline_verify(struct ccw_device *cdev,
+ enum dev_event dev_event)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ css_schedule_eval(sch->schid);
+}
+
+/*
* Handle path verification event.
*/
static void
@@ -887,6 +905,8 @@
}
call_handler:
cdev->private->state = DEV_STATE_ONLINE;
+ /* In case sensing interfered with setting the device online */
+ wake_up(&cdev->private->wait_q);
/* Call the handler. */
if (ccw_device_call_handler(cdev) && cdev->private->flags.doverify)
/* Start delayed path verification. */
@@ -1149,7 +1169,7 @@
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
[DEV_EVENT_INTERRUPT] = ccw_device_offline_irq,
[DEV_EVENT_TIMEOUT] = ccw_device_nop,
- [DEV_EVENT_VERIFY] = ccw_device_nop,
+ [DEV_EVENT_VERIFY] = ccw_device_offline_verify,
},
[DEV_STATE_VERIFY] = {
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index b1241f8..ff7748a 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -1,7 +1,7 @@
/*
* linux/drivers/s390/cio/qdio.h
*
- * Copyright 2000,2008 IBM Corp.
+ * Copyright 2000,2009 IBM Corp.
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>
* Jan Glauber <jang@linux.vnet.ibm.com>
*/
@@ -246,6 +246,7 @@
atomic_t nr_buf_used;
struct qdio_irq *irq_ptr;
+ struct dentry *debugfs_q;
struct tasklet_struct tasklet;
/* error condition during a data transfer */
@@ -267,6 +268,7 @@
struct qib qib;
u32 *dsci; /* address of device state change indicator */
struct ccw_device *cdev;
+ struct dentry *debugfs_dev;
unsigned long int_parm;
struct subchannel_id schid;
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index b8626d4..1b78f63 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -1,14 +1,12 @@
/*
* drivers/s390/cio/qdio_debug.c
*
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
*
* Author: Jan Glauber (jang@linux.vnet.ibm.com)
*/
-#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
-#include <asm/qdio.h>
#include <asm/debug.h>
#include "qdio_debug.h"
#include "qdio.h"
@@ -17,10 +15,7 @@
debug_info_t *qdio_dbf_error;
static struct dentry *debugfs_root;
-#define MAX_DEBUGFS_QUEUES 32
-static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL };
-static DEFINE_MUTEX(debugfs_mutex);
-#define QDIO_DEBUGFS_NAME_LEN 40
+#define QDIO_DEBUGFS_NAME_LEN 10
void qdio_allocate_dbf(struct qdio_initialize *init_data,
struct qdio_irq *irq_ptr)
@@ -130,20 +125,6 @@
filp->f_path.dentry->d_inode->i_private);
}
-static void remove_debugfs_entry(struct qdio_q *q)
-{
- int i;
-
- for (i = 0; i < MAX_DEBUGFS_QUEUES; i++) {
- if (!debugfs_queues[i])
- continue;
- if (debugfs_queues[i]->d_inode->i_private == q) {
- debugfs_remove(debugfs_queues[i]);
- debugfs_queues[i] = NULL;
- }
- }
-}
-
static struct file_operations debugfs_fops = {
.owner = THIS_MODULE,
.open = qstat_seq_open,
@@ -155,22 +136,15 @@
static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev)
{
- int i = 0;
char name[QDIO_DEBUGFS_NAME_LEN];
- while (debugfs_queues[i] != NULL) {
- i++;
- if (i >= MAX_DEBUGFS_QUEUES)
- return;
- }
- snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d",
- dev_name(&cdev->dev),
+ snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%d",
q->is_input_q ? "input" : "output",
q->nr);
- debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR,
- debugfs_root, q, &debugfs_fops);
- if (IS_ERR(debugfs_queues[i]))
- debugfs_queues[i] = NULL;
+ q->debugfs_q = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR,
+ q->irq_ptr->debugfs_dev, q, &debugfs_fops);
+ if (IS_ERR(q->debugfs_q))
+ q->debugfs_q = NULL;
}
void qdio_setup_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev)
@@ -178,12 +152,14 @@
struct qdio_q *q;
int i;
- mutex_lock(&debugfs_mutex);
+ irq_ptr->debugfs_dev = debugfs_create_dir(dev_name(&cdev->dev),
+ debugfs_root);
+ if (IS_ERR(irq_ptr->debugfs_dev))
+ irq_ptr->debugfs_dev = NULL;
for_each_input_queue(irq_ptr, q, i)
setup_debugfs_entry(q, cdev);
for_each_output_queue(irq_ptr, q, i)
setup_debugfs_entry(q, cdev);
- mutex_unlock(&debugfs_mutex);
}
void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev)
@@ -191,17 +167,16 @@
struct qdio_q *q;
int i;
- mutex_lock(&debugfs_mutex);
for_each_input_queue(irq_ptr, q, i)
- remove_debugfs_entry(q);
+ debugfs_remove(q->debugfs_q);
for_each_output_queue(irq_ptr, q, i)
- remove_debugfs_entry(q);
- mutex_unlock(&debugfs_mutex);
+ debugfs_remove(q->debugfs_q);
+ debugfs_remove(irq_ptr->debugfs_dev);
}
int __init qdio_debug_init(void)
{
- debugfs_root = debugfs_create_dir("qdio_queues", NULL);
+ debugfs_root = debugfs_create_dir("qdio", NULL);
qdio_dbf_setup = debug_register("qdio_setup", 16, 1, 16);
debug_register_view(qdio_dbf_setup, &debug_hex_ascii_view);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 0038750..9aef402 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -798,8 +798,10 @@
if (!qdio_inbound_q_done(q)) {
qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop);
- if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
+ if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED)) {
tasklet_schedule(&q->tasklet);
+ return;
+ }
}
qdio_stop_polling(q);
diff --git a/drivers/s390/cio/scsw.c b/drivers/s390/cio/scsw.c
deleted file mode 100644
index f8da25a..0000000
--- a/drivers/s390/cio/scsw.c
+++ /dev/null
@@ -1,843 +0,0 @@
-/*
- * Helper functions for scsw access.
- *
- * Copyright IBM Corp. 2008
- * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/cio.h>
-#include "css.h"
-#include "chsc.h"
-
-/**
- * scsw_is_tm - check for transport mode scsw
- * @scsw: pointer to scsw
- *
- * Return non-zero if the specified scsw is a transport mode scsw, zero
- * otherwise.
- */
-int scsw_is_tm(union scsw *scsw)
-{
- return css_general_characteristics.fcx && (scsw->tm.x == 1);
-}
-EXPORT_SYMBOL(scsw_is_tm);
-
-/**
- * scsw_key - return scsw key field
- * @scsw: pointer to scsw
- *
- * Return the value of the key field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_key(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.key;
- else
- return scsw->cmd.key;
-}
-EXPORT_SYMBOL(scsw_key);
-
-/**
- * scsw_eswf - return scsw eswf field
- * @scsw: pointer to scsw
- *
- * Return the value of the eswf field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_eswf(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.eswf;
- else
- return scsw->cmd.eswf;
-}
-EXPORT_SYMBOL(scsw_eswf);
-
-/**
- * scsw_cc - return scsw cc field
- * @scsw: pointer to scsw
- *
- * Return the value of the cc field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_cc(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.cc;
- else
- return scsw->cmd.cc;
-}
-EXPORT_SYMBOL(scsw_cc);
-
-/**
- * scsw_ectl - return scsw ectl field
- * @scsw: pointer to scsw
- *
- * Return the value of the ectl field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_ectl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.ectl;
- else
- return scsw->cmd.ectl;
-}
-EXPORT_SYMBOL(scsw_ectl);
-
-/**
- * scsw_pno - return scsw pno field
- * @scsw: pointer to scsw
- *
- * Return the value of the pno field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_pno(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.pno;
- else
- return scsw->cmd.pno;
-}
-EXPORT_SYMBOL(scsw_pno);
-
-/**
- * scsw_fctl - return scsw fctl field
- * @scsw: pointer to scsw
- *
- * Return the value of the fctl field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_fctl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.fctl;
- else
- return scsw->cmd.fctl;
-}
-EXPORT_SYMBOL(scsw_fctl);
-
-/**
- * scsw_actl - return scsw actl field
- * @scsw: pointer to scsw
- *
- * Return the value of the actl field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_actl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.actl;
- else
- return scsw->cmd.actl;
-}
-EXPORT_SYMBOL(scsw_actl);
-
-/**
- * scsw_stctl - return scsw stctl field
- * @scsw: pointer to scsw
- *
- * Return the value of the stctl field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_stctl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.stctl;
- else
- return scsw->cmd.stctl;
-}
-EXPORT_SYMBOL(scsw_stctl);
-
-/**
- * scsw_dstat - return scsw dstat field
- * @scsw: pointer to scsw
- *
- * Return the value of the dstat field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_dstat(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.dstat;
- else
- return scsw->cmd.dstat;
-}
-EXPORT_SYMBOL(scsw_dstat);
-
-/**
- * scsw_cstat - return scsw cstat field
- * @scsw: pointer to scsw
- *
- * Return the value of the cstat field of the specified scsw, regardless of
- * whether it is a transport mode or command mode scsw.
- */
-u32 scsw_cstat(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw->tm.cstat;
- else
- return scsw->cmd.cstat;
-}
-EXPORT_SYMBOL(scsw_cstat);
-
-/**
- * scsw_cmd_is_valid_key - check key field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the key field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_key(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_key);
-
-/**
- * scsw_cmd_is_valid_sctl - check fctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fctl field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_sctl(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_sctl);
-
-/**
- * scsw_cmd_is_valid_eswf - check eswf field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the eswf field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_eswf(union scsw *scsw)
-{
- return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_eswf);
-
-/**
- * scsw_cmd_is_valid_cc - check cc field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the cc field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_cc(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
- (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_cc);
-
-/**
- * scsw_cmd_is_valid_fmt - check fmt field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fmt field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_fmt(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_fmt);
-
-/**
- * scsw_cmd_is_valid_pfch - check pfch field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the pfch field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_pfch(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_pfch);
-
-/**
- * scsw_cmd_is_valid_isic - check isic field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the isic field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_isic(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_isic);
-
-/**
- * scsw_cmd_is_valid_alcc - check alcc field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the alcc field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_alcc(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_alcc);
-
-/**
- * scsw_cmd_is_valid_ssi - check ssi field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the ssi field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_ssi(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_ssi);
-
-/**
- * scsw_cmd_is_valid_zcc - check zcc field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the zcc field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_zcc(union scsw *scsw)
-{
- return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
- (scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_zcc);
-
-/**
- * scsw_cmd_is_valid_ectl - check ectl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the ectl field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_ectl(union scsw *scsw)
-{
- return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
- !(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
- (scsw->cmd.stctl & SCSW_STCTL_ALERT_STATUS);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_ectl);
-
-/**
- * scsw_cmd_is_valid_pno - check pno field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the pno field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_pno(union scsw *scsw)
-{
- return (scsw->cmd.fctl != 0) &&
- (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
- (!(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) ||
- ((scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
- (scsw->cmd.actl & SCSW_ACTL_SUSPENDED)));
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_pno);
-
-/**
- * scsw_cmd_is_valid_fctl - check fctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fctl field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_fctl(union scsw *scsw)
-{
- /* Only valid if pmcw.dnv == 1*/
- return 1;
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_fctl);
-
-/**
- * scsw_cmd_is_valid_actl - check actl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the actl field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_actl(union scsw *scsw)
-{
- /* Only valid if pmcw.dnv == 1*/
- return 1;
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_actl);
-
-/**
- * scsw_cmd_is_valid_stctl - check stctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the stctl field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_stctl(union scsw *scsw)
-{
- /* Only valid if pmcw.dnv == 1*/
- return 1;
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_stctl);
-
-/**
- * scsw_cmd_is_valid_dstat - check dstat field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the dstat field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_dstat(union scsw *scsw)
-{
- return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
- (scsw->cmd.cc != 3);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_dstat);
-
-/**
- * scsw_cmd_is_valid_cstat - check cstat field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the cstat field of the specified command mode scsw is
- * valid, zero otherwise.
- */
-int scsw_cmd_is_valid_cstat(union scsw *scsw)
-{
- return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
- (scsw->cmd.cc != 3);
-}
-EXPORT_SYMBOL(scsw_cmd_is_valid_cstat);
-
-/**
- * scsw_tm_is_valid_key - check key field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the key field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_key(union scsw *scsw)
-{
- return (scsw->tm.fctl & SCSW_FCTL_START_FUNC);
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_key);
-
-/**
- * scsw_tm_is_valid_eswf - check eswf field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the eswf field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_eswf(union scsw *scsw)
-{
- return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_eswf);
-
-/**
- * scsw_tm_is_valid_cc - check cc field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the cc field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_cc(union scsw *scsw)
-{
- return (scsw->tm.fctl & SCSW_FCTL_START_FUNC) &&
- (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_cc);
-
-/**
- * scsw_tm_is_valid_fmt - check fmt field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fmt field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_fmt(union scsw *scsw)
-{
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_fmt);
-
-/**
- * scsw_tm_is_valid_x - check x field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the x field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_x(union scsw *scsw)
-{
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_x);
-
-/**
- * scsw_tm_is_valid_q - check q field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the q field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_q(union scsw *scsw)
-{
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_q);
-
-/**
- * scsw_tm_is_valid_ectl - check ectl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the ectl field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_ectl(union scsw *scsw)
-{
- return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
- !(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
- (scsw->tm.stctl & SCSW_STCTL_ALERT_STATUS);
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_ectl);
-
-/**
- * scsw_tm_is_valid_pno - check pno field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the pno field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_pno(union scsw *scsw)
-{
- return (scsw->tm.fctl != 0) &&
- (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
- (!(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) ||
- ((scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
- (scsw->tm.actl & SCSW_ACTL_SUSPENDED)));
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_pno);
-
-/**
- * scsw_tm_is_valid_fctl - check fctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fctl field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_fctl(union scsw *scsw)
-{
- /* Only valid if pmcw.dnv == 1*/
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_fctl);
-
-/**
- * scsw_tm_is_valid_actl - check actl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the actl field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_actl(union scsw *scsw)
-{
- /* Only valid if pmcw.dnv == 1*/
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_actl);
-
-/**
- * scsw_tm_is_valid_stctl - check stctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the stctl field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_stctl(union scsw *scsw)
-{
- /* Only valid if pmcw.dnv == 1*/
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_stctl);
-
-/**
- * scsw_tm_is_valid_dstat - check dstat field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the dstat field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_dstat(union scsw *scsw)
-{
- return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
- (scsw->tm.cc != 3);
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_dstat);
-
-/**
- * scsw_tm_is_valid_cstat - check cstat field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the cstat field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_cstat(union scsw *scsw)
-{
- return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
- (scsw->tm.cc != 3);
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_cstat);
-
-/**
- * scsw_tm_is_valid_fcxs - check fcxs field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fcxs field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_fcxs(union scsw *scsw)
-{
- return 1;
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_fcxs);
-
-/**
- * scsw_tm_is_valid_schxs - check schxs field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the schxs field of the specified transport mode scsw is
- * valid, zero otherwise.
- */
-int scsw_tm_is_valid_schxs(union scsw *scsw)
-{
- return (scsw->tm.cstat & (SCHN_STAT_PROG_CHECK |
- SCHN_STAT_INTF_CTRL_CHK |
- SCHN_STAT_PROT_CHECK |
- SCHN_STAT_CHN_DATA_CHK));
-}
-EXPORT_SYMBOL(scsw_tm_is_valid_schxs);
-
-/**
- * scsw_is_valid_actl - check actl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the actl field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_actl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_actl(scsw);
- else
- return scsw_cmd_is_valid_actl(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_actl);
-
-/**
- * scsw_is_valid_cc - check cc field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the cc field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_cc(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_cc(scsw);
- else
- return scsw_cmd_is_valid_cc(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_cc);
-
-/**
- * scsw_is_valid_cstat - check cstat field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the cstat field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_cstat(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_cstat(scsw);
- else
- return scsw_cmd_is_valid_cstat(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_cstat);
-
-/**
- * scsw_is_valid_dstat - check dstat field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the dstat field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_dstat(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_dstat(scsw);
- else
- return scsw_cmd_is_valid_dstat(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_dstat);
-
-/**
- * scsw_is_valid_ectl - check ectl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the ectl field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_ectl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_ectl(scsw);
- else
- return scsw_cmd_is_valid_ectl(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_ectl);
-
-/**
- * scsw_is_valid_eswf - check eswf field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the eswf field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_eswf(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_eswf(scsw);
- else
- return scsw_cmd_is_valid_eswf(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_eswf);
-
-/**
- * scsw_is_valid_fctl - check fctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the fctl field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_fctl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_fctl(scsw);
- else
- return scsw_cmd_is_valid_fctl(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_fctl);
-
-/**
- * scsw_is_valid_key - check key field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the key field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_key(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_key(scsw);
- else
- return scsw_cmd_is_valid_key(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_key);
-
-/**
- * scsw_is_valid_pno - check pno field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the pno field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_pno(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_pno(scsw);
- else
- return scsw_cmd_is_valid_pno(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_pno);
-
-/**
- * scsw_is_valid_stctl - check stctl field validity
- * @scsw: pointer to scsw
- *
- * Return non-zero if the stctl field of the specified scsw is valid,
- * regardless of whether it is a transport mode or command mode scsw.
- * Return zero if the field does not contain a valid value.
- */
-int scsw_is_valid_stctl(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_valid_stctl(scsw);
- else
- return scsw_cmd_is_valid_stctl(scsw);
-}
-EXPORT_SYMBOL(scsw_is_valid_stctl);
-
-/**
- * scsw_cmd_is_solicited - check for solicited scsw
- * @scsw: pointer to scsw
- *
- * Return non-zero if the command mode scsw indicates that the associated
- * status condition is solicited, zero if it is unsolicited.
- */
-int scsw_cmd_is_solicited(union scsw *scsw)
-{
- return (scsw->cmd.cc != 0) || (scsw->cmd.stctl !=
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
-}
-EXPORT_SYMBOL(scsw_cmd_is_solicited);
-
-/**
- * scsw_tm_is_solicited - check for solicited scsw
- * @scsw: pointer to scsw
- *
- * Return non-zero if the transport mode scsw indicates that the associated
- * status condition is solicited, zero if it is unsolicited.
- */
-int scsw_tm_is_solicited(union scsw *scsw)
-{
- return (scsw->tm.cc != 0) || (scsw->tm.stctl !=
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
-}
-EXPORT_SYMBOL(scsw_tm_is_solicited);
-
-/**
- * scsw_is_solicited - check for solicited scsw
- * @scsw: pointer to scsw
- *
- * Return non-zero if the transport or command mode scsw indicates that the
- * associated status condition is solicited, zero if it is unsolicited.
- */
-int scsw_is_solicited(union scsw *scsw)
-{
- if (scsw_is_tm(scsw))
- return scsw_tm_is_solicited(scsw);
- else
- return scsw_cmd_is_solicited(scsw);
-}
-EXPORT_SYMBOL(scsw_is_solicited);
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index ed3dcde..090b32a 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -648,7 +648,9 @@
/* Poll on the device until all requests are finished. */
do {
flags = 0;
+ spin_lock_bh(&ap_dev->lock);
__ap_poll_device(ap_dev, &flags);
+ spin_unlock_bh(&ap_dev->lock);
} while ((flags & 1) || (flags & 2));
ap_device_remove(dev);
@@ -1109,12 +1111,15 @@
ap_dev->device.bus = &ap_bus_type;
ap_dev->device.parent = ap_root_device;
- dev_set_name(&ap_dev->device, "card%02x",
- AP_QID_DEVICE(ap_dev->qid));
+ if (dev_set_name(&ap_dev->device, "card%02x",
+ AP_QID_DEVICE(ap_dev->qid))) {
+ kfree(ap_dev);
+ continue;
+ }
ap_dev->device.release = ap_device_release;
rc = device_register(&ap_dev->device);
if (rc) {
- kfree(ap_dev);
+ put_device(&ap_dev->device);
continue;
}
/* Add device attributes. */
@@ -1407,14 +1412,12 @@
static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
{
- spin_lock(&ap_dev->lock);
if (!ap_dev->unregistered) {
if (ap_poll_queue(ap_dev, flags))
ap_dev->unregistered = 1;
if (ap_dev->reset == AP_RESET_DO)
ap_reset(ap_dev);
}
- spin_unlock(&ap_dev->lock);
return 0;
}
@@ -1441,7 +1444,9 @@
flags = 0;
spin_lock(&ap_device_list_lock);
list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock(&ap_dev->lock);
__ap_poll_device(ap_dev, &flags);
+ spin_unlock(&ap_dev->lock);
}
spin_unlock(&ap_device_list_lock);
} while (flags & 1);
@@ -1487,7 +1492,9 @@
flags = 0;
spin_lock_bh(&ap_device_list_lock);
list_for_each_entry(ap_dev, &ap_device_list, list) {
+ spin_lock(&ap_dev->lock);
__ap_poll_device(ap_dev, &flags);
+ spin_unlock(&ap_dev->lock);
}
spin_unlock_bh(&ap_device_list_lock);
}
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index e38e5d3..2930fc7 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -403,10 +403,14 @@
return len;
}
-void __init s390_virtio_console_init(void)
+static int __init s390_virtio_console_init(void)
{
- virtio_cons_early_init(early_put_chars);
+ if (!MACHINE_IS_KVM)
+ return -ENODEV;
+ return virtio_cons_early_init(early_put_chars);
}
+console_initcall(s390_virtio_console_init);
+
/*
* We do this after core stuff, but before the drivers.
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index f370f8d..c63babe 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -350,6 +350,8 @@
CLAW_DBF_TEXT_(4, trace, "clawtx%d", rc);
if (rc)
rc = NETDEV_TX_BUSY;
+ else
+ rc = NETDEV_TX_OK;
return rc;
} /* end of claw_tx */
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 222e473..c5b8387 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -164,7 +164,6 @@
priv->stats.rx_packets++;
priv->stats.rx_bytes += skblen;
netif_rx_ni(skb);
- dev->last_rx = jiffies;
if (len > 0) {
skb_pull(pskb, header->length);
if (skb_tailroom(pskb) < LL_HEADER_LENGTH) {
@@ -880,7 +879,7 @@
"%s(%s): NULL sk_buff passed",
CTCM_FUNTAIL, dev->name);
priv->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
if (skb_headroom(skb) < (LL_HEADER_LENGTH + 2)) {
CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
@@ -888,7 +887,7 @@
CTCM_FUNTAIL, dev->name, LL_HEADER_LENGTH + 2);
dev_kfree_skb(skb);
priv->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -901,7 +900,7 @@
priv->stats.tx_dropped++;
priv->stats.tx_errors++;
priv->stats.tx_carrier_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
if (ctcm_test_and_set_busy(dev))
@@ -910,7 +909,7 @@
dev->trans_start = jiffies;
if (ctcm_transmit_skb(priv->channel[WRITE], skb) != 0)
return NETDEV_TX_BUSY;
- return 0;
+ return NETDEV_TX_OK;
}
/* unmerged MPC variant of ctcm_tx */
@@ -1008,7 +1007,7 @@
if (do_debug)
MPC_DBF_DEV_NAME(TRACE, dev, "exit");
- return 0; /* handle freeing of skb here */
+ return NETDEV_TX_OK; /* handle freeing of skb here */
}
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 8c67590..a70de9b 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1553,24 +1553,24 @@
struct net_device *dev)
{
struct lcs_header *header;
- int rc = 0;
+ int rc = NETDEV_TX_OK;
LCS_DBF_TEXT(5, trace, "hardxmit");
if (skb == NULL) {
card->stats.tx_dropped++;
card->stats.tx_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
if (card->state != DEV_STATE_UP) {
dev_kfree_skb(skb);
card->stats.tx_dropped++;
card->stats.tx_errors++;
card->stats.tx_carrier_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
if (skb->protocol == htons(ETH_P_IPV6)) {
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
netif_stop_queue(card->dev);
spin_lock(&card->lock);
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 8c36eaf..9215fbb 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -676,7 +676,6 @@
* we must use netif_rx_ni() instead of netif_rx()
*/
netif_rx_ni(skb);
- dev->last_rx = jiffies;
skb_pull(pskb, header->next);
skb_put(pskb, NETIUCV_HDRLEN);
}
@@ -1376,14 +1375,14 @@
if (skb == NULL) {
IUCV_DBF_TEXT(data, 2, "netiucv_tx: skb is NULL\n");
privptr->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
if (skb_headroom(skb) < NETIUCV_HDRLEN) {
IUCV_DBF_TEXT(data, 2,
"netiucv_tx: skb_headroom < NETIUCV_HDRLEN\n");
dev_kfree_skb(skb);
privptr->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
/**
@@ -1395,7 +1394,7 @@
privptr->stats.tx_dropped++;
privptr->stats.tx_errors++;
privptr->stats.tx_carrier_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
if (netiucv_test_and_set_busy(dev)) {
@@ -1839,9 +1838,10 @@
return -ENOMEM;
ret = device_register(dev);
-
- if (ret)
+ if (ret) {
+ put_device(dev);
return ret;
+ }
ret = netiucv_add_files(dev);
if (ret)
goto out_unreg;
@@ -2226,8 +2226,10 @@
netiucv_dev->release = (void (*)(struct device *))kfree;
netiucv_dev->driver = &netiucv_driver;
rc = device_register(netiucv_dev);
- if (rc)
+ if (rc) {
+ put_device(netiucv_dev);
goto out_driver;
+ }
netiucv_banner();
return rc;
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 447e1d1..31a2b4e 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -435,6 +435,7 @@
* index of buffer to be filled by driver; state EMPTY or PACKING
*/
int next_buf_to_fill;
+ int sync_iqdio_error;
/*
* number of buffers that are currently filled (PRIMED)
* -> these buffers are hardware-owned
@@ -685,6 +686,14 @@
int is_vmac;
};
+struct qeth_skb_data {
+ __u32 magic;
+ int count;
+};
+
+#define QETH_SKB_MAGIC 0x71657468
+#define QETH_SIGA_CC2_RETRIES 3
+
struct qeth_card {
struct list_head list;
enum qeth_card_states state;
@@ -834,7 +843,6 @@
int qeth_send_control_data(struct qeth_card *, int, struct qeth_cmd_buffer *,
int (*reply_cb)(struct qeth_card *, struct qeth_reply*, unsigned long),
void *reply_param);
-int qeth_get_cast_type(struct qeth_card *, struct sk_buff *);
int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index d53621c..c4a42d9 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -927,8 +927,8 @@
return;
}
-static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
- struct qeth_qdio_out_buffer *buf)
+static void __qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
+ struct qeth_qdio_out_buffer *buf, unsigned int qeth_skip_skb)
{
int i;
struct sk_buff *skb;
@@ -937,11 +937,13 @@
if (buf->buffer->element[0].flags & 0x40)
atomic_dec(&queue->set_pci_flags_count);
- skb = skb_dequeue(&buf->skb_list);
- while (skb) {
- atomic_dec(&skb->users);
- dev_kfree_skb_any(skb);
+ if (!qeth_skip_skb) {
skb = skb_dequeue(&buf->skb_list);
+ while (skb) {
+ atomic_dec(&skb->users);
+ dev_kfree_skb_any(skb);
+ skb = skb_dequeue(&buf->skb_list);
+ }
}
for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
if (buf->buffer->element[i].addr && buf->is_header[i])
@@ -957,6 +959,12 @@
atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
}
+static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
+ struct qeth_qdio_out_buffer *buf)
+{
+ __qeth_clear_output_buffer(queue, buf, 0);
+}
+
void qeth_clear_qdio_buffers(struct qeth_card *card)
{
int i, j;
@@ -1152,8 +1160,9 @@
{
struct qeth_card *card = container_of(slr, struct qeth_card,
qeth_service_level);
- seq_printf(m, "qeth: %s firmware level %s\n", CARD_BUS_ID(card),
- card->info.mcl_level);
+ if (card->info.mcl_level[0])
+ seq_printf(m, "qeth: %s firmware level %s\n",
+ CARD_BUS_ID(card), card->info.mcl_level);
}
static struct qeth_card *qeth_alloc_card(void)
@@ -2685,6 +2694,13 @@
int sbalf15 = buffer->buffer->element[15].flags & 0xff;
QETH_DBF_TEXT(TRACE, 6, "hdsnderr");
+ if (card->info.type == QETH_CARD_TYPE_IQD) {
+ if (sbalf15 == 0) {
+ qdio_err = 0;
+ } else {
+ qdio_err = 1;
+ }
+ }
qeth_check_qdio_errors(buffer->buffer, qdio_err, "qouterr");
if (!qdio_err)
@@ -2817,6 +2833,7 @@
}
}
+ queue->sync_iqdio_error = 0;
queue->card->dev->trans_start = jiffies;
if (queue->card->options.performance_stats) {
queue->card->perf_stats.outbound_do_qdio_cnt++;
@@ -2832,6 +2849,10 @@
queue->card->perf_stats.outbound_do_qdio_time +=
qeth_get_micros() -
queue->card->perf_stats.outbound_do_qdio_start_time;
+ if (rc > 0) {
+ if (!(rc & QDIO_ERROR_SIGA_BUSY))
+ queue->sync_iqdio_error = rc & 3;
+ }
if (rc) {
queue->card->stats.tx_errors += count;
/* ignore temporary SIGA errors without busy condition */
@@ -2899,6 +2920,7 @@
struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue];
struct qeth_qdio_out_buffer *buffer;
int i;
+ unsigned qeth_send_err;
QETH_DBF_TEXT(TRACE, 6, "qdouhdl");
if (qdio_error & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) {
@@ -2915,8 +2937,9 @@
}
for (i = first_element; i < (first_element + count); ++i) {
buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
- qeth_handle_send_error(card, buffer, qdio_error);
- qeth_clear_output_buffer(queue, buffer);
+ qeth_send_err = qeth_handle_send_error(card, buffer, qdio_error);
+ __qeth_clear_output_buffer(queue, buffer,
+ (qeth_send_err == QETH_SEND_ERROR_RETRY) ? 1 : 0);
}
atomic_sub(count, &queue->used_buffers);
/* check if we need to do something on this outbound queue */
@@ -2930,55 +2953,6 @@
}
EXPORT_SYMBOL_GPL(qeth_qdio_output_handler);
-int qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
-{
- int cast_type = RTN_UNSPEC;
-
- if (card->info.type == QETH_CARD_TYPE_OSN)
- return cast_type;
-
- if (skb_dst(skb) && skb_dst(skb)->neighbour) {
- cast_type = skb_dst(skb)->neighbour->type;
- if ((cast_type == RTN_BROADCAST) ||
- (cast_type == RTN_MULTICAST) ||
- (cast_type == RTN_ANYCAST))
- return cast_type;
- else
- return RTN_UNSPEC;
- }
- /* try something else */
- if (skb->protocol == ETH_P_IPV6)
- return (skb_network_header(skb)[24] == 0xff) ?
- RTN_MULTICAST : 0;
- else if (skb->protocol == ETH_P_IP)
- return ((skb_network_header(skb)[16] & 0xf0) == 0xe0) ?
- RTN_MULTICAST : 0;
- /* ... */
- if (!memcmp(skb->data, skb->dev->broadcast, 6))
- return RTN_BROADCAST;
- else {
- u16 hdr_mac;
-
- hdr_mac = *((u16 *)skb->data);
- /* tr multicast? */
- switch (card->info.link_type) {
- case QETH_LINK_TYPE_HSTR:
- case QETH_LINK_TYPE_LANE_TR:
- if ((hdr_mac == QETH_TR_MAC_NC) ||
- (hdr_mac == QETH_TR_MAC_C))
- return RTN_MULTICAST;
- break;
- /* eth or so multicast? */
- default:
- if ((hdr_mac == QETH_ETH_MAC_V4) ||
- (hdr_mac == QETH_ETH_MAC_V6))
- return RTN_MULTICAST;
- }
- }
- return cast_type;
-}
-EXPORT_SYMBOL_GPL(qeth_get_cast_type);
-
int qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb,
int ipv, int cast_type)
{
@@ -3159,7 +3133,10 @@
int offset, int hd_len)
{
struct qeth_qdio_out_buffer *buffer;
+ struct sk_buff *skb1;
+ struct qeth_skb_data *retry_ctrl;
int index;
+ int rc;
/* spin until we get the queue ... */
while (atomic_cmpxchg(&queue->state, QETH_OUT_Q_UNLOCKED,
@@ -3178,6 +3155,25 @@
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
qeth_flush_buffers(queue, index, 1);
+ if (queue->sync_iqdio_error == 2) {
+ skb1 = skb_dequeue(&buffer->skb_list);
+ while (skb1) {
+ atomic_dec(&skb1->users);
+ skb1 = skb_dequeue(&buffer->skb_list);
+ }
+ retry_ctrl = (struct qeth_skb_data *) &skb->cb[16];
+ if (retry_ctrl->magic != QETH_SKB_MAGIC) {
+ retry_ctrl->magic = QETH_SKB_MAGIC;
+ retry_ctrl->count = 0;
+ }
+ if (retry_ctrl->count < QETH_SIGA_CC2_RETRIES) {
+ retry_ctrl->count++;
+ rc = dev_queue_xmit(skb);
+ } else {
+ dev_kfree_skb_any(skb);
+ QETH_DBF_TEXT(QERR, 2, "qrdrop");
+ }
+ }
return 0;
out:
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 568465d..33505c2 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -364,7 +364,7 @@
if (!card)
return -EINVAL;
- return sprintf(buf, "%i\n", card->options.layer2 ? 1:0);
+ return sprintf(buf, "%i\n", card->options.layer2);
}
static ssize_t qeth_dev_layer2_store(struct device *dev,
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 691cecd..f4f3ca1 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -216,36 +216,16 @@
spin_unlock_bh(&card->mclock);
}
-static void qeth_l2_get_packet_type(struct qeth_card *card,
- struct qeth_hdr *hdr, struct sk_buff *skb)
+static inline int qeth_l2_get_cast_type(struct qeth_card *card,
+ struct sk_buff *skb)
{
- __u16 hdr_mac;
-
- if (!memcmp(skb->data + QETH_HEADER_SIZE,
- skb->dev->broadcast, 6)) {
- /* broadcast? */
- hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_BROADCAST;
- return;
- }
- hdr_mac = *((__u16 *)skb->data);
- /* tr multicast? */
- switch (card->info.link_type) {
- case QETH_LINK_TYPE_HSTR:
- case QETH_LINK_TYPE_LANE_TR:
- if ((hdr_mac == QETH_TR_MAC_NC) ||
- (hdr_mac == QETH_TR_MAC_C))
- hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_MULTICAST;
- else
- hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_UNICAST;
- break;
- /* eth or so multicast? */
- default:
- if ((hdr_mac == QETH_ETH_MAC_V4) ||
- (hdr_mac == QETH_ETH_MAC_V6))
- hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_MULTICAST;
- else
- hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_UNICAST;
- }
+ if (card->info.type == QETH_CARD_TYPE_OSN)
+ return RTN_UNSPEC;
+ if (is_broadcast_ether_addr(skb->data))
+ return RTN_BROADCAST;
+ if (is_multicast_ether_addr(skb->data))
+ return RTN_MULTICAST;
+ return RTN_UNSPEC;
}
static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
@@ -262,7 +242,7 @@
else if (cast_type == RTN_BROADCAST)
hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_BROADCAST;
else
- qeth_l2_get_packet_type(card, hdr, skb);
+ hdr->hdr.l2.flags[2] |= QETH_LAYER2_FLAG_UNICAST;
hdr->hdr.l2.pkt_length = skb->len-QETH_HEADER_SIZE;
/* VSWITCH relies on the VLAN
@@ -469,7 +449,6 @@
QETH_DBF_HEX(CTRL, 3, hdr, QETH_DBF_CTRL_LEN);
continue;
}
- card->dev->last_rx = jiffies;
card->stats.rx_packets++;
card->stats.rx_bytes += len;
}
@@ -672,7 +651,7 @@
struct qeth_card *card = dev->ml_priv;
struct sk_buff *new_skb = skb;
int ipv = qeth_get_ip_version(skb);
- int cast_type = qeth_get_cast_type(card, skb);
+ int cast_type = qeth_l2_get_cast_type(card, skb);
struct qeth_qdio_out_q *queue = card->qdio.out_qs
[qeth_get_priority_queue(card, skb, ipv, cast_type)];
int tx_bytes = skb->len;
@@ -744,6 +723,7 @@
card->stats.tx_bytes += tx_bytes;
if (new_skb != skb)
dev_kfree_skb_any(skb);
+ rc = NETDEV_TX_OK;
} else {
if (data_offset >= 0)
kmem_cache_free(qeth_core_header_cache, hdr);
@@ -882,7 +862,7 @@
return;
}
-static struct ethtool_ops qeth_l2_ethtool_ops = {
+static const struct ethtool_ops qeth_l2_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_strings = qeth_core_get_strings,
.get_ethtool_stats = qeth_core_get_ethtool_stats,
@@ -891,7 +871,7 @@
.get_settings = qeth_core_ethtool_get_settings,
};
-static struct ethtool_ops qeth_l2_osn_ops = {
+static const struct ethtool_ops qeth_l2_osn_ops = {
.get_strings = qeth_core_get_strings,
.get_ethtool_stats = qeth_core_get_ethtool_stats,
.get_stats_count = qeth_core_get_stats_count,
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 5487240..073b6d3 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1987,7 +1987,6 @@
continue;
}
- card->dev->last_rx = jiffies;
card->stats.rx_packets++;
card->stats.rx_bytes += len;
}
@@ -2525,6 +2524,51 @@
return rc;
}
+int inline qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
+{
+ int cast_type = RTN_UNSPEC;
+
+ if (skb_dst(skb) && skb_dst(skb)->neighbour) {
+ cast_type = skb_dst(skb)->neighbour->type;
+ if ((cast_type == RTN_BROADCAST) ||
+ (cast_type == RTN_MULTICAST) ||
+ (cast_type == RTN_ANYCAST))
+ return cast_type;
+ else
+ return RTN_UNSPEC;
+ }
+ /* try something else */
+ if (skb->protocol == ETH_P_IPV6)
+ return (skb_network_header(skb)[24] == 0xff) ?
+ RTN_MULTICAST : 0;
+ else if (skb->protocol == ETH_P_IP)
+ return ((skb_network_header(skb)[16] & 0xf0) == 0xe0) ?
+ RTN_MULTICAST : 0;
+ /* ... */
+ if (!memcmp(skb->data, skb->dev->broadcast, 6))
+ return RTN_BROADCAST;
+ else {
+ u16 hdr_mac;
+
+ hdr_mac = *((u16 *)skb->data);
+ /* tr multicast? */
+ switch (card->info.link_type) {
+ case QETH_LINK_TYPE_HSTR:
+ case QETH_LINK_TYPE_LANE_TR:
+ if ((hdr_mac == QETH_TR_MAC_NC) ||
+ (hdr_mac == QETH_TR_MAC_C))
+ return RTN_MULTICAST;
+ break;
+ /* eth or so multicast? */
+ default:
+ if ((hdr_mac == QETH_ETH_MAC_V4) ||
+ (hdr_mac == QETH_ETH_MAC_V6))
+ return RTN_MULTICAST;
+ }
+ }
+ return cast_type;
+}
+
static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
struct sk_buff *skb, int ipv, int cast_type)
{
@@ -2650,7 +2694,7 @@
struct qeth_card *card = dev->ml_priv;
struct sk_buff *new_skb = NULL;
int ipv = qeth_get_ip_version(skb);
- int cast_type = qeth_get_cast_type(card, skb);
+ int cast_type = qeth_l3_get_cast_type(card, skb);
struct qeth_qdio_out_q *queue = card->qdio.out_qs
[qeth_get_priority_queue(card, skb, ipv, cast_type)];
int tx_bytes = skb->len;
@@ -2793,6 +2837,7 @@
card->perf_stats.sg_frags_sent += nr_frags + 1;
}
}
+ rc = NETDEV_TX_OK;
} else {
if (data_offset >= 0)
kmem_cache_free(qeth_core_header_cache, hdr);
@@ -2900,7 +2945,7 @@
return 0;
}
-static struct ethtool_ops qeth_l3_ethtool_ops = {
+static const struct ethtool_ops qeth_l3_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_tx_csum = ethtool_op_get_tx_csum,
.set_tx_csum = ethtool_op_set_tx_hw_csum,
@@ -3179,6 +3224,7 @@
netif_carrier_on(card->dev);
qeth_set_allowed_threads(card, 0xffffffff, 0);
+ qeth_l3_set_ip_addr_list(card);
if (recover_flag == CARD_STATE_RECOVER) {
if (recovery_mode)
qeth_l3_open(card->dev);
diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c
index e76a320..102000d 100644
--- a/drivers/s390/net/smsgiucv.c
+++ b/drivers/s390/net/smsgiucv.c
@@ -219,13 +219,13 @@
smsg_dev->driver = &smsg_driver;
rc = device_register(smsg_dev);
if (rc)
- goto out_free_dev;
+ goto out_put;
cpcmd("SET SMSG IUCV", NULL, 0, NULL);
return 0;
-out_free_dev:
- kfree(smsg_dev);
+out_put:
+ put_device(smsg_dev);
out_free_path:
iucv_path_free(smsg_path);
smsg_path = NULL;
diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c
index 15dab96..7c815d3 100644
--- a/drivers/sbus/char/bbc_envctrl.c
+++ b/drivers/sbus/char/bbc_envctrl.c
@@ -537,8 +537,12 @@
}
if (temp_index != 0 && fan_index != 0) {
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
- if (IS_ERR(kenvctrld_task))
- return PTR_ERR(kenvctrld_task);
+ if (IS_ERR(kenvctrld_task)) {
+ int err = PTR_ERR(kenvctrld_task);
+
+ kenvctrld_task = NULL;
+ return err;
+ }
}
return 0;
@@ -561,7 +565,8 @@
struct bbc_cpu_temperature *tp, *tpos;
struct bbc_fan_control *fp, *fpos;
- kthread_stop(kenvctrld_task);
+ if (kenvctrld_task)
+ kthread_stop(kenvctrld_task);
list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
list_del(&tp->bp_list);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_init.c b/drivers/scsi/cxgb3i/cxgb3i_init.c
index 042d9bc..d0ab23a 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_init.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_init.c
@@ -26,7 +26,7 @@
static void open_s3_dev(struct t3cdev *);
static void close_s3_dev(struct t3cdev *);
-static void s3_err_handler(struct t3cdev *tdev, u32 status, u32 error);
+static void s3_event_handler(struct t3cdev *tdev, u32 event, u32 port);
static cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS];
static struct cxgb3_client t3c_client = {
@@ -34,7 +34,7 @@
.handlers = cxgb3i_cpl_handlers,
.add = open_s3_dev,
.remove = close_s3_dev,
- .err_handler = s3_err_handler,
+ .event_handler = s3_event_handler,
};
/**
@@ -66,16 +66,16 @@
cxgb3i_ddp_cleanup(t3dev);
}
-static void s3_err_handler(struct t3cdev *tdev, u32 status, u32 error)
+static void s3_event_handler(struct t3cdev *tdev, u32 event, u32 port)
{
struct cxgb3i_adapter *snic = cxgb3i_adapter_find_by_tdev(tdev);
- cxgb3i_log_info("snic 0x%p, tdev 0x%p, status 0x%x, err 0x%x.\n",
- snic, tdev, status, error);
+ cxgb3i_log_info("snic 0x%p, tdev 0x%p, event 0x%x, port 0x%x.\n",
+ snic, tdev, event, port);
if (!snic)
return;
- switch (status) {
+ switch (event) {
case OFFLOAD_STATUS_DOWN:
snic->flags |= CXGB3I_ADAPTER_FLAG_RESET;
break;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6553833..03422ce 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@
int
depends on ARM && PLAT_S3C
default 2 if ARCH_S3C2400
- default 4 if ARCH_S3C64XX || CPU_S3C2443
+ default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@
Serial port support for the Samsung S3C6400 and S3C6410
SoCs
+config SERIAL_S5PC100
+ tristate "Samsung S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && CPU_S5PC100
+ default y
+ help
+ Serial port support for the Samsung S5PC100 SoCs
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a2998..97f6fcc 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index bf82e28..72ba0c6 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -826,6 +826,28 @@
return 0;
}
+#ifdef CONFIG_PM
+static int pl011_suspend(struct amba_device *dev, pm_message_t state)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (!uap)
+ return -EINVAL;
+
+ return uart_suspend_port(&amba_reg, &uap->port);
+}
+
+static int pl011_resume(struct amba_device *dev)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (!uap)
+ return -EINVAL;
+
+ return uart_resume_port(&amba_reg, &uap->port);
+}
+#endif
+
static struct amba_id pl011_ids[] __initdata = {
{
.id = 0x00041011,
@@ -847,6 +869,10 @@
.id_table = pl011_ids,
.probe = pl011_probe,
.remove = pl011_remove,
+#ifdef CONFIG_PM
+ .suspend = pl011_suspend,
+ .resume = pl011_resume,
+#endif
};
static int __init pl011_init(void)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5d7b58f..7485afd 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -67,21 +67,8 @@
#define UBIR 0xa4 /* BRM Incremental Register */
#define UBMR 0xa8 /* BRM Modulator Register */
#define UBRC 0xac /* Baud Rate Count Register */
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define ONEMS 0xb0 /* One Millisecond register */
-#define UTS 0xb4 /* UART Test Register */
-#endif
-#ifdef CONFIG_ARCH_MX1
-#define BIPR1 0xb0 /* Incremental Preset Register 1 */
-#define BIPR2 0xb4 /* Incremental Preset Register 2 */
-#define BIPR3 0xb8 /* Incremental Preset Register 3 */
-#define BIPR4 0xbc /* Incremental Preset Register 4 */
-#define BMPR1 0xc0 /* BRM Modulator Register 1 */
-#define BMPR2 0xc4 /* BRM Modulator Register 2 */
-#define BMPR3 0xc8 /* BRM Modulator Register 3 */
-#define BMPR4 0xcc /* BRM Modulator Register 4 */
-#define UTS 0xd0 /* UART Test Register */
-#endif
+#define MX2_ONEMS 0xb0 /* One Millisecond register */
+#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
@@ -101,12 +88,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_MX1
-#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
-#endif
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */
-#endif
+#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
@@ -132,13 +114,9 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_MX1
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
-#endif
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
-#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
-#endif
+#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
@@ -186,12 +164,10 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
#define DEV_NAME "ttymxc"
#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
-#endif
/*
* This determines how often we check the modem status signals
@@ -706,11 +682,11 @@
}
}
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
- temp = readl(sport->port.membase + UCR3);
- temp |= UCR3_RXDMUXSEL;
- writel(temp, sport->port.membase + UCR3);
-#endif
+ if (!cpu_is_mx1()) {
+ temp = readl(sport->port.membase + UCR3);
+ temp |= MX2_UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+ }
if (USE_IRDA(sport)) {
temp = readl(sport->port.membase + UCR4);
@@ -942,9 +918,9 @@
writel(num, sport->port.membase + UBIR);
writel(denom, sport->port.membase + UBMR);
-#ifdef ONEMS
- writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
-#endif
+ if (!cpu_is_mx1())
+ writel(sport->port.uartclk / div / 1000,
+ sport->port.membase + MX2_ONEMS);
writel(old_ucr1, sport->port.membase + UCR1);
@@ -1074,17 +1050,20 @@
imx_console_write(struct console *co, const char *s, unsigned int count)
{
struct imx_port *sport = imx_ports[co->index];
- unsigned int old_ucr1, old_ucr2;
+ unsigned int old_ucr1, old_ucr2, ucr1;
/*
* First, save UCR1/2 and then disable interrupts
*/
- old_ucr1 = readl(sport->port.membase + UCR1);
+ ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
old_ucr2 = readl(sport->port.membase + UCR2);
- writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) &
- ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
- sport->port.membase + UCR1);
+ if (cpu_is_mx1())
+ ucr1 |= MX1_UCR1_UARTCLKEN;
+ ucr1 |= UCR1_UARTEN;
+ ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+
+ writel(ucr1, sport->port.membase + UCR1);
writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index e066563..52db5cc 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -110,7 +110,11 @@
static void ks8695uart_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
- disable_irq(KS8695_IRQ_UART_TX);
+ /* use disable_irq_nosync() and not disable_irq() to avoid self
+ * imposed deadlock by not waiting for irq handler to end,
+ * since this ks8695uart_stop_tx() is called from interrupt context.
+ */
+ disable_irq_nosync(KS8695_IRQ_UART_TX);
tx_enable(port, 0);
}
}
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index da76797..c0f950a 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -38,14 +38,12 @@
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
-#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
-#include <linux/delay.h>
/*
* This macro is used to define some register default values.
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 540a294..2d8cc45 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -66,6 +66,20 @@
If unsure, say N
+config SSB_SDIOHOST_POSSIBLE
+ bool
+ depends on SSB && (MMC = y || MMC = SSB)
+ default y
+
+config SSB_SDIOHOST
+ bool "Support for SSB on SDIO-bus host"
+ depends on SSB_SDIOHOST_POSSIBLE
+ help
+ Support for a Sonics Silicon Backplane on top
+ of a SDIO device.
+
+ If unsure, say N
+
config SSB_SILENT
bool "No SSB kernel messages"
depends on SSB && EMBEDDED
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index cfbb74f..656e58b 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -6,6 +6,7 @@
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
+ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index 4aaddee..64abd11 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -28,6 +28,21 @@
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
}
+static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
+ u32 offset, u32 mask, u32 set)
+{
+ u32 value;
+
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
+ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
+ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
+ value &= mask;
+ value |= set;
+ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
+ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
+}
+
struct pmu0_plltab_entry {
u16 freq; /* Crystal frequency in kHz.*/
u8 xf; /* Crystal frequency value for PMU control */
@@ -506,3 +521,82 @@
ssb_pmu_pll_init(cc);
ssb_pmu_resources_init(cc);
}
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ enum ssb_pmu_ldo_volt_id id, u32 voltage)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 addr, shift, mask;
+
+ switch (bus->chip_id) {
+ case 0x4328:
+ case 0x5354:
+ switch (id) {
+ case LDO_VOLT1:
+ addr = 2;
+ shift = 25;
+ mask = 0xF;
+ break;
+ case LDO_VOLT2:
+ addr = 3;
+ shift = 1;
+ mask = 0xF;
+ break;
+ case LDO_VOLT3:
+ addr = 3;
+ shift = 9;
+ mask = 0xF;
+ break;
+ case LDO_PAREF:
+ addr = 3;
+ shift = 17;
+ mask = 0x3F;
+ break;
+ default:
+ SSB_WARN_ON(1);
+ return;
+ }
+ break;
+ case 0x4312:
+ if (SSB_WARN_ON(id != LDO_PAREF))
+ return;
+ addr = 0;
+ shift = 21;
+ mask = 0x3F;
+ break;
+ default:
+ return;
+ }
+
+ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
+ (voltage & mask) << shift);
+}
+
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int ldo;
+
+ switch (bus->chip_id) {
+ case 0x4312:
+ ldo = SSB_PMURES_4312_PA_REF_LDO;
+ break;
+ case 0x4328:
+ ldo = SSB_PMURES_4328_PA_REF_LDO;
+ break;
+ case 0x5354:
+ ldo = SSB_PMURES_5354_PA_REF_LDO;
+ break;
+ default:
+ return;
+ }
+
+ if (on)
+ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
+ else
+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
+ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
+}
+
+EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
+EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 65a1ed9..579b114 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -17,6 +17,7 @@
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/mmc/sdio_func.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -88,6 +89,25 @@
}
#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
+{
+ struct ssb_bus *bus;
+
+ ssb_buses_lock();
+ list_for_each_entry(bus, &buses, list) {
+ if (bus->bustype == SSB_BUSTYPE_SDIO &&
+ bus->host_sdio == func)
+ goto found;
+ }
+ bus = NULL;
+found:
+ ssb_buses_unlock();
+
+ return bus;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data))
{
@@ -469,6 +489,12 @@
dev->parent = &bus->host_pcmcia->dev;
#endif
break;
+ case SSB_BUSTYPE_SDIO:
+#ifdef CONFIG_SSB_SDIO
+ sdev->irq = bus->host_sdio->dev.irq;
+ dev->parent = &bus->host_sdio->dev;
+#endif
+ break;
case SSB_BUSTYPE_SSB:
dev->dma_mask = &dev->coherent_dma_mask;
break;
@@ -724,12 +750,18 @@
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
if (err)
goto out;
+
+ /* Init SDIO-host device (if any), before the scan */
+ err = ssb_sdio_init(bus);
+ if (err)
+ goto err_disable_xtal;
+
ssb_buses_lock();
bus->busnumber = next_busnumber;
/* Scan for devices (cores) */
err = ssb_bus_scan(bus, baseaddr);
if (err)
- goto err_disable_xtal;
+ goto err_sdio_exit;
/* Init PCI-host device (if any) */
err = ssb_pci_init(bus);
@@ -776,6 +808,8 @@
ssb_pci_exit(bus);
err_unmap:
ssb_iounmap(bus);
+err_sdio_exit:
+ ssb_sdio_exit(bus);
err_disable_xtal:
ssb_buses_unlock();
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
@@ -825,6 +859,28 @@
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
+ unsigned int quirks)
+{
+ int err;
+
+ bus->bustype = SSB_BUSTYPE_SDIO;
+ bus->host_sdio = func;
+ bus->ops = &ssb_sdio_ops;
+ bus->quirks = quirks;
+
+ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+ if (!err) {
+ ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ "SDIO device %s\n", sdio_func_id(func));
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(ssb_bus_sdiobus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
unsigned long baseaddr,
ssb_invariants_func_t get_invariants)
@@ -1358,8 +1414,10 @@
ssb_buses_lock();
err = ssb_attach_queued_buses();
ssb_buses_unlock();
- if (err)
+ if (err) {
bus_unregister(&ssb_bustype);
+ goto out;
+ }
err = b43_pci_ssb_bridge_init();
if (err) {
@@ -1375,7 +1433,7 @@
/* don't fail SSB init because of this */
err = 0;
}
-
+out:
return err;
}
/* ssb must be initialized after PCI but before the ssb drivers.
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 40ea417..f853d56 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -169,8 +169,14 @@
/* Get the word-offset for a SSB_SPROM_XXX define. */
#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-#define SPEX(_outvar, _offset, _mask, _shift) \
+#define SPEX16(_outvar, _offset, _mask, _shift) \
out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+#define SPEX32(_outvar, _offset, _mask, _shift) \
+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
+ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
+#define SPEX(_outvar, _offset, _mask, _shift) \
+ SPEX16(_outvar, _offset, _mask, _shift)
+
static inline u8 ssb_crc8(u8 crc, u8 data)
{
@@ -474,12 +480,14 @@
/* extract the MAC address */
for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
}
SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
SSB_SPROM8_ANTAVAIL_A_SHIFT);
SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
@@ -490,12 +498,55 @@
SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
SSB_SPROM8_ITSSI_A_SHIFT);
+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
+ SSB_SPROM8_MAXP_AL_SHIFT);
SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
SSB_SPROM8_GPIOA_P1_SHIFT);
SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
SSB_SPROM8_GPIOB_P3_SHIFT);
+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
+ SSB_SPROM8_TRI5G_SHIFT);
+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
+ SSB_SPROM8_TRI5GH_SHIFT);
+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
+ SSB_SPROM8_RXPO5G_SHIFT);
+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
+ SSB_SPROM8_RSSISMC2G_SHIFT);
+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
+ SSB_SPROM8_RSSISAV2G_SHIFT);
+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
+ SSB_SPROM8_BXA2G_SHIFT);
+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
+ SSB_SPROM8_RSSISMC5G_SHIFT);
+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
+ SSB_SPROM8_RSSISAV5G_SHIFT);
+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
+ SSB_SPROM8_BXA5G_SHIFT);
+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 63ee5cf..b74212d 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -175,6 +175,9 @@
} else
ssb_pcmcia_switch_segment(bus, 0);
break;
+ case SSB_BUSTYPE_SDIO:
+ offset += current_coreidx * SSB_CORE_SIZE;
+ return ssb_sdio_scan_read32(bus, offset);
}
return readl(bus->mmio + offset);
}
@@ -188,6 +191,8 @@
return ssb_pci_switch_coreidx(bus, coreidx);
case SSB_BUSTYPE_PCMCIA:
return ssb_pcmcia_switch_coreidx(bus, coreidx);
+ case SSB_BUSTYPE_SDIO:
+ return ssb_sdio_scan_switch_coreidx(bus, coreidx);
}
return 0;
}
@@ -206,6 +211,8 @@
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
+ case SSB_BUSTYPE_SDIO:
+ break;
}
bus->mmio = NULL;
bus->mapped_device = NULL;
@@ -230,6 +237,10 @@
SSB_BUG_ON(1); /* Can't reach this code. */
#endif
break;
+ case SSB_BUSTYPE_SDIO:
+ /* Nothing to ioremap in the SDIO case, just fake it */
+ mmio = (void __iomem *)baseaddr;
+ break;
}
return mmio;
diff --git a/drivers/ssb/sdio.c b/drivers/ssb/sdio.c
new file mode 100644
index 0000000..1140510
--- /dev/null
+++ b/drivers/ssb/sdio.c
@@ -0,0 +1,610 @@
+/*
+ * Sonics Silicon Backplane
+ * SDIO-Hostbus related functions
+ *
+ * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
+ *
+ * Based on drivers/ssb/pcmcia.c
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ *
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "ssb_private.h"
+
+/* Define the following to 1 to enable a printk on each coreswitch. */
+#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 1
+
+
+/* Hardware invariants CIS tuples */
+#define SSB_SDIO_CIS 0x80
+#define SSB_SDIO_CIS_SROMREV 0x00
+#define SSB_SDIO_CIS_ID 0x01
+#define SSB_SDIO_CIS_BOARDREV 0x02
+#define SSB_SDIO_CIS_PA 0x03
+#define SSB_SDIO_CIS_PA_PA0B0_LO 0
+#define SSB_SDIO_CIS_PA_PA0B0_HI 1
+#define SSB_SDIO_CIS_PA_PA0B1_LO 2
+#define SSB_SDIO_CIS_PA_PA0B1_HI 3
+#define SSB_SDIO_CIS_PA_PA0B2_LO 4
+#define SSB_SDIO_CIS_PA_PA0B2_HI 5
+#define SSB_SDIO_CIS_PA_ITSSI 6
+#define SSB_SDIO_CIS_PA_MAXPOW 7
+#define SSB_SDIO_CIS_OEMNAME 0x04
+#define SSB_SDIO_CIS_CCODE 0x05
+#define SSB_SDIO_CIS_ANTENNA 0x06
+#define SSB_SDIO_CIS_ANTGAIN 0x07
+#define SSB_SDIO_CIS_BFLAGS 0x08
+#define SSB_SDIO_CIS_LEDS 0x09
+
+#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
+
+
+/*
+ * Function 1 miscellaneous registers.
+ *
+ * Definitions match src/include/sbsdio.h from the
+ * Android Open Source Project
+ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
+ *
+ */
+#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
+#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
+
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
+
+#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
+
+/* REVISIT: this flag doesn't seem to matter */
+#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
+
+
+/*
+ * Address map within the SDIO function address space (128K).
+ *
+ * Start End Description
+ * ------- ------- ------------------------------------------
+ * 0x00000 0x0ffff selected backplane address window (64K)
+ * 0x10000 0x1ffff backplane control registers (max 64K)
+ *
+ * The current address window is configured by writing to registers
+ * SBADDRLOW, SBADDRMID and SBADDRHIGH.
+ *
+ * In order to access the contents of a 32-bit Silicon Backplane address
+ * the backplane address window must be first loaded with the highest
+ * 16 bits of the target address. Then, an access must be done to the
+ * SDIO function address space using the lower 15 bits of the address.
+ * Bit 15 of the address must be set when doing 32 bit accesses.
+ *
+ * 10987654321098765432109876543210
+ * WWWWWWWWWWWWWWWWW SB Address Window
+ * OOOOOOOOOOOOOOOO Offset within SB Address Window
+ * a 32-bit access flag
+ */
+
+
+/*
+ * SSB I/O via SDIO.
+ *
+ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
+ */
+
+static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
+{
+ return &bus->host_sdio->dev;
+}
+
+/* host claimed */
+static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
+{
+ int error = 0;
+
+ sdio_writeb(bus->host_sdio, val, addr, &error);
+ if (unlikely(error)) {
+ dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
+ addr, val, error);
+ }
+
+ return error;
+}
+
+#if 0
+static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
+{
+ u8 val;
+ int error = 0;
+
+ val = sdio_readb(bus->host_sdio, addr, &error);
+ if (unlikely(error)) {
+ dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
+ addr, val, error);
+ }
+
+ return val;
+}
+#endif
+
+/* host claimed */
+static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
+{
+ int error;
+
+ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
+ (address >> 8) & SBSDIO_SBADDRLOW_MASK);
+ if (error)
+ goto out;
+ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
+ (address >> 16) & SBSDIO_SBADDRMID_MASK);
+ if (error)
+ goto out;
+ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
+ (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
+ if (error)
+ goto out;
+ bus->sdio_sbaddr = address;
+out:
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
+ " to 0x%08x, error %d\n", address, error);
+ }
+
+ return error;
+}
+
+/* for enumeration use only */
+u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+ u32 val;
+ int error;
+
+ sdio_claim_host(bus->host_sdio);
+ val = sdio_readl(bus->host_sdio, offset, &error);
+ sdio_release_host(bus->host_sdio);
+ if (unlikely(error)) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+
+ return val;
+}
+
+/* for enumeration use only */
+int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+ u32 sbaddr;
+ int error;
+
+ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+ sdio_claim_host(bus->host_sdio);
+ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+ sdio_release_host(bus->host_sdio);
+ if (error) {
+ dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
+ " error %d\n", coreidx, error);
+ goto out;
+ }
+out:
+ return error;
+}
+
+/* host must be already claimed */
+int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
+{
+ u8 coreidx = dev->core_index;
+ u32 sbaddr;
+ int error = 0;
+
+ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+ if (unlikely(bus->sdio_sbaddr != sbaddr)) {
+#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
+ dev_info(ssb_sdio_dev(bus),
+ "switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid), coreidx);
+#endif
+ error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
+ " core %u, error %d\n", coreidx, error);
+ goto out;
+ }
+ bus->mapped_device = dev;
+ }
+
+out:
+ return error;
+}
+
+static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u8 val = 0xff;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ val = sdio_readb(bus->host_sdio, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+
+ return val;
+}
+
+static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u16 val = 0xffff;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ val = sdio_readw(bus->host_sdio, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+
+ return val;
+}
+
+static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
+{
+ struct ssb_bus *bus = dev->bus;
+ u32 val = 0xffffffff;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ val = sdio_readl(bus->host_sdio, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+
+ return val;
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ size_t saved_count = count;
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+ error = -EIO;
+ memset(buffer, 0xff, count);
+ goto err_out;
+ }
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+ break;
+ }
+ case sizeof(u16): {
+ SSB_WARN_ON(count & 1);
+ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+ break;
+ }
+ case sizeof(u32): {
+ SSB_WARN_ON(count & 3);
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+ break;
+ }
+ default:
+ SSB_WARN_ON(1);
+ }
+ if (!error)
+ goto out;
+
+err_out:
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
+ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+ sdio_release_host(bus->host_sdio);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
+{
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ sdio_writeb(bus->host_sdio, val, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
+{
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ sdio_writew(bus->host_sdio, val, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
+{
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev)))
+ goto out;
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ sdio_writel(bus->host_sdio, val, offset, &error);
+ if (error) {
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
+ bus->sdio_sbaddr >> 16, offset, val, error);
+ }
+ if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
+ sdio_readl(bus->host_sdio, 0, &error);
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
+ size_t count, u16 offset, u8 reg_width)
+{
+ size_t saved_count = count;
+ struct ssb_bus *bus = dev->bus;
+ int error = 0;
+
+ sdio_claim_host(bus->host_sdio);
+ if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+ error = -EIO;
+ memset((void *)buffer, 0xff, count);
+ goto err_out;
+ }
+ offset |= bus->sdio_sbaddr & 0xffff;
+ offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+ switch (reg_width) {
+ case sizeof(u8):
+ error = sdio_writesb(bus->host_sdio, offset,
+ (void *)buffer, count);
+ break;
+ case sizeof(u16):
+ SSB_WARN_ON(count & 1);
+ error = sdio_writesb(bus->host_sdio, offset,
+ (void *)buffer, count);
+ break;
+ case sizeof(u32):
+ SSB_WARN_ON(count & 3);
+ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
+ error = sdio_writesb(bus->host_sdio, offset,
+ (void *)buffer, count);
+ break;
+ default:
+ SSB_WARN_ON(1);
+ }
+ if (!error)
+ goto out;
+
+err_out:
+ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
+ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+ sdio_release_host(bus->host_sdio);
+}
+
+#endif /* CONFIG_SSB_BLOCKIO */
+
+/* Not "static", as it's used in main.c */
+const struct ssb_bus_ops ssb_sdio_ops = {
+ .read8 = ssb_sdio_read8,
+ .read16 = ssb_sdio_read16,
+ .read32 = ssb_sdio_read32,
+ .write8 = ssb_sdio_write8,
+ .write16 = ssb_sdio_write16,
+ .write32 = ssb_sdio_write32,
+#ifdef CONFIG_SSB_BLOCKIO
+ .block_read = ssb_sdio_block_read,
+ .block_write = ssb_sdio_block_write,
+#endif
+};
+
+#define GOTO_ERROR_ON(condition, description) do { \
+ if (unlikely(condition)) { \
+ error_description = description; \
+ goto error; \
+ } \
+ } while (0)
+
+int ssb_sdio_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv)
+{
+ struct ssb_sprom *sprom = &iv->sprom;
+ struct ssb_boardinfo *bi = &iv->boardinfo;
+ const char *error_description = "none";
+ struct sdio_func_tuple *tuple;
+ void *mac;
+
+ memset(sprom, 0xFF, sizeof(*sprom));
+ sprom->boardflags_lo = 0;
+ sprom->boardflags_hi = 0;
+
+ tuple = bus->host_sdio->tuples;
+ while (tuple) {
+ switch (tuple->code) {
+ case 0x22: /* extended function */
+ switch (tuple->data[0]) {
+ case CISTPL_FUNCE_LAN_NODE_ID:
+ GOTO_ERROR_ON((tuple->size != 7) &&
+ (tuple->data[1] != 6),
+ "mac tpl size");
+ /* fetch the MAC address. */
+ mac = tuple->data + 2;
+ memcpy(sprom->il0mac, mac, ETH_ALEN);
+ memcpy(sprom->et1mac, mac, ETH_ALEN);
+ break;
+ default:
+ break;
+ }
+ break;
+ case 0x80: /* vendor specific tuple */
+ switch (tuple->data[0]) {
+ case SSB_SDIO_CIS_SROMREV:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "sromrev tpl size");
+ sprom->revision = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_ID:
+ GOTO_ERROR_ON((tuple->size != 5) &&
+ (tuple->size != 7),
+ "id tpl size");
+ bi->vendor = tuple->data[1] |
+ (tuple->data[2]<<8);
+ break;
+ case SSB_SDIO_CIS_BOARDREV:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "boardrev tpl size");
+ sprom->board_rev = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_PA:
+ GOTO_ERROR_ON((tuple->size != 9) &&
+ (tuple->size != 10),
+ "pa tpl size");
+ sprom->pa0b0 = tuple->data[1] |
+ ((u16)tuple->data[2] << 8);
+ sprom->pa0b1 = tuple->data[3] |
+ ((u16)tuple->data[4] << 8);
+ sprom->pa0b2 = tuple->data[5] |
+ ((u16)tuple->data[6] << 8);
+ sprom->itssi_a = tuple->data[7];
+ sprom->itssi_bg = tuple->data[7];
+ sprom->maxpwr_a = tuple->data[8];
+ sprom->maxpwr_bg = tuple->data[8];
+ break;
+ case SSB_SDIO_CIS_OEMNAME:
+ /* Not present */
+ break;
+ case SSB_SDIO_CIS_CCODE:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "ccode tpl size");
+ sprom->country_code = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_ANTENNA:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "ant tpl size");
+ sprom->ant_available_a = tuple->data[1];
+ sprom->ant_available_bg = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "antg tpl size");
+ sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+ sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+ sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+ sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+ sprom->antenna_gain.ghz5.a3 = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->size != 3) &&
+ (tuple->size != 5),
+ "bfl tpl size");
+ sprom->boardflags_lo = tuple->data[1] |
+ ((u16)tuple->data[2] << 8);
+ break;
+ case SSB_SDIO_CIS_LEDS:
+ GOTO_ERROR_ON(tuple->size != 5,
+ "leds tpl size");
+ sprom->gpio0 = tuple->data[1];
+ sprom->gpio1 = tuple->data[2];
+ sprom->gpio2 = tuple->data[3];
+ sprom->gpio3 = tuple->data[4];
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ tuple = tuple->next;
+ }
+
+ return 0;
+error:
+ dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
+ error_description);
+ return -ENODEV;
+}
+
+void ssb_sdio_exit(struct ssb_bus *bus)
+{
+ if (bus->bustype != SSB_BUSTYPE_SDIO)
+ return;
+ /* Nothing to do here. */
+}
+
+int ssb_sdio_init(struct ssb_bus *bus)
+{
+ if (bus->bustype != SSB_BUSTYPE_SDIO)
+ return 0;
+
+ bus->sdio_sbaddr = ~0;
+
+ return 0;
+}
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 57fa482..2543356 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -114,6 +114,46 @@
}
#endif /* CONFIG_SSB_PCMCIAHOST */
+/* sdio.c */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
+ struct ssb_init_invariants *iv);
+
+extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
+extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
+extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
+extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
+extern void ssb_sdio_exit(struct ssb_bus *bus);
+extern int ssb_sdio_init(struct ssb_bus *bus);
+
+extern const struct ssb_bus_ops ssb_sdio_ops;
+#else /* CONFIG_SSB_SDIOHOST */
+static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+ return 0;
+}
+static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
+ struct ssb_device *dev)
+{
+ return 0;
+}
+static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+ return 0;
+}
+static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
+{
+ return 0;
+}
+static inline void ssb_sdio_exit(struct ssb_bus *bus)
+{
+}
+static inline int ssb_sdio_init(struct ssb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
/* scan.c */
extern const char *ssb_core_name(u16 coreid);
diff --git a/drivers/staging/agnx/xmit.c b/drivers/staging/agnx/xmit.c
index 0e03408..42db410 100644
--- a/drivers/staging/agnx/xmit.c
+++ b/drivers/staging/agnx/xmit.c
@@ -384,7 +384,8 @@
/* dump_ieee80211_hdr((struct ieee80211_hdr *)skb->data, "RX G"); */
} else
agnx_bug("Unknown packets type");
- ieee80211_rx_irqsafe(priv->hw, skb, &status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx_irqsafe(priv->hw, skb);
rx_desc_reinit(priv, i);
} while (priv->rx.idx++);
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index 3f303ae..c165c50 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -3134,7 +3134,7 @@
netdev->name, __func__);
/* skip this packet */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (priv->tx_urb->status == -EINPROGRESS) {
@@ -3142,14 +3142,14 @@
netdev->name, __func__);
/* skip this packet */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
if (skb->len < ETH_HLEN) {
printk(KERN_ERR "%s: %s: skb too short (%d)\n",
netdev->name, __func__, skb->len);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */
@@ -3173,7 +3173,7 @@
skb->data[ETH_HLEN + 1],
skb->data[ETH_HLEN + 2]);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
} else {
/* add RFC 1042 header in front */
@@ -3396,7 +3396,7 @@
return priv->mac_state == MAC_CONNECTED;
}
-static struct ethtool_ops at76_ethtool_ops = {
+static const struct ethtool_ops at76_ethtool_ops = {
.get_drvinfo = at76_ethtool_get_drvinfo,
.get_link = at76_ethtool_get_link,
};
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 9d7c993..640f65c 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1752,12 +1752,12 @@
mutex_lock(&dev->mutex);
if (dev->attached)
goto ok;
- if (!capable(CAP_SYS_MODULE) && dev->in_request_module) {
+ if (!capable(CAP_NET_ADMIN) && dev->in_request_module) {
DPRINTK("in request module\n");
mutex_unlock(&dev->mutex);
return -ENODEV;
}
- if (capable(CAP_SYS_MODULE) && dev->in_request_module)
+ if (capable(CAP_NET_ADMIN) && dev->in_request_module)
goto ok;
dev->in_request_module = 1;
@@ -1770,8 +1770,8 @@
dev->in_request_module = 0;
- if (!dev->attached && !capable(CAP_SYS_MODULE)) {
- DPRINTK("not attached and not CAP_SYS_MODULE\n");
+ if (!dev->attached && !capable(CAP_NET_ADMIN)) {
+ DPRINTK("not attached and not CAP_NET_ADMIN\n");
mutex_unlock(&dev->mutex);
return -ENODEV;
}
diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c
index fad25b7..8472418 100644
--- a/drivers/staging/dst/dcore.c
+++ b/drivers/staging/dst/dcore.c
@@ -846,10 +846,9 @@
/*
* Configuration parser.
*/
-static void cn_dst_callback(void *data)
+static void cn_dst_callback(struct cn_msg *msg)
{
struct dst_ctl *ctl;
- struct cn_msg *msg = data;
int err;
struct dst_ctl_ack ack;
struct dst_node *n = NULL, *tmp;
diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c
index 077724a..7b7cce1 100644
--- a/drivers/staging/epl/VirtualEthernetLinux.c
+++ b/drivers/staging/epl/VirtualEthernetLinux.c
@@ -223,7 +223,7 @@
}
Exit:
- return 0;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 93cab0a..42230e6 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -170,7 +170,7 @@
return ret;
}
-struct ethtool_ops cvm_oct_ethtool_ops = {
+struct const ethtool_ops cvm_oct_ethtool_ops = {
.get_drvinfo = cvm_oct_get_drvinfo,
.get_settings = cvm_oct_get_settings,
.set_settings = cvm_oct_set_settings,
diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h
index 6314141..b3328ae 100644
--- a/drivers/staging/octeon/ethernet-mdio.h
+++ b/drivers/staging/octeon/ethernet-mdio.h
@@ -41,6 +41,6 @@
#include <net/xfrm.h>
#endif /* CONFIG_XFRM */
-extern struct ethtool_ops cvm_oct_ethtool_ops;
+extern const struct ethtool_ops cvm_oct_ethtool_ops;
int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
int cvm_oct_mdio_setup_device(struct net_device *dev);
diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c
index 540cbbb..7cd87ca 100644
--- a/drivers/staging/otus/usbdrv.c
+++ b/drivers/staging/otus/usbdrv.c
@@ -659,7 +659,7 @@
netif_stop_queue(dev);
}
- return 0;
+ return NETDEV_TX_OK;
}
@@ -796,13 +796,13 @@
if (vapId >= ZM_VAP_PORT_NUMBER)
{
dev_kfree_skb_irq(skb);
- return 0;
+ return NETDEV_TX_OK;
}
#if 1
if (vap[vapId].openFlag == 0)
{
dev_kfree_skb_irq(skb);
- return 0;
+ return NETDEV_TX_OK;
}
#endif
@@ -819,7 +819,7 @@
netif_stop_queue(dev);
}
- return 0;
+ return NETDEV_TX_OK;
}
static const struct net_device_ops vap_netdev_ops = {
diff --git a/drivers/staging/otus/wrap_pkt.c b/drivers/staging/otus/wrap_pkt.c
index 5db0004..89a6b92 100644
--- a/drivers/staging/otus/wrap_pkt.c
+++ b/drivers/staging/otus/wrap_pkt.c
@@ -156,10 +156,7 @@
switch(netif_rx(buf))
#endif
{
- case NET_RX_BAD:
case NET_RX_DROP:
- case NET_RX_CN_MOD:
- case NET_RX_CN_HIGH:
break;
default:
macp->drv_stats.net_stats.rx_packets++;
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 7b60579..d004a9d 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -921,16 +921,16 @@
if (ret)
goto err_out_unlock;
- ret = generic_file_aio_write_nolock(&kiocb, &iov, 1, pos);
+ ret = __generic_file_aio_write(&kiocb, &iov, 1, &kiocb.ki_pos);
*ppos = kiocb.ki_pos;
mutex_unlock(&inode->i_mutex);
WARN_ON(ret < 0);
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ if (ret > 0) {
ssize_t err;
- err = sync_page_range(inode, mapping, pos, ret);
+ err = generic_write_sync(file, pos, ret);
if (err < 0)
ret = err;
WARN_ON(ret < 0);
@@ -1950,14 +1950,7 @@
*/
static void pohmelfs_kill_super(struct super_block *sb)
{
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .range_start = 0,
- .range_end = LLONG_MAX,
- .nr_to_write = LONG_MAX,
- };
- generic_sync_sb_inodes(sb, &wbc);
-
+ sync_inodes_sb(sb);
kill_anon_super(sb);
}
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index f298b9b..35c59d5 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -862,7 +862,7 @@
{
struct net_device *net_dev = skb->dev;
PRTMP_ADAPTER pAd = net_dev->ml_priv;
- int status = 0;
+ int status = NETDEV_TX_OK;
PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
{
@@ -892,7 +892,7 @@
STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
- status = 0;
+ status = NETDEV_TX_OK;
done:
return status;
@@ -923,7 +923,7 @@
if (!(net_dev->flags & IFF_UP))
{
RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
- return 0;
+ return NETDEV_TX_OK;
}
NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
index 1294e05..1b77460 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -802,13 +802,13 @@
if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
stats->tx_packets++;
stats->tx_bytes += txb->payload_size;
- return 0;
+ return NETDEV_TX_OK;
}
ieee80211_txb_free(txb);
}
}
- return 0;
+ return NETDEV_TX_OK;
failed:
spin_unlock_irqrestore(&ieee->lock, flags);
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 7e2feca..26a5911 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -3040,7 +3040,7 @@
spin_unlock_irqrestore(&priv->tx_lock,flags);
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
rtl8180_tx(dev, skb->data, skb->len, priority,
@@ -3051,7 +3051,7 @@
spin_unlock_irqrestore(&priv->tx_lock,flags);
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
// longpre 144+48 shortpre 72+24
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index ed47db5..b01a282 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -845,7 +845,7 @@
hcmd->paddrh, DONT_FLUSH);
}
xmit_done:
- return 0;
+ return NETDEV_TX_OK;
xmit_fail:
slic_xmit_fail(adapter, skb, offloadcmd, skbtype, status);
goto xmit_done;
diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c
index a137c78..12d414d 100644
--- a/drivers/staging/stlc45xx/stlc45xx.c
+++ b/drivers/staging/stlc45xx/stlc45xx.c
@@ -1429,7 +1429,8 @@
stlc45xx_debug(DEBUG_RX, "rx data 0x%p %d B", skb->data, skb->len);
stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len);
- ieee80211_rx(stlc->hw, skb, &status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx(stlc->hw, skb);
return 0;
}
diff --git a/drivers/staging/sxg/sxg.h b/drivers/staging/sxg/sxg.h
index f07aa70..110096a 100644
--- a/drivers/staging/sxg/sxg.h
+++ b/drivers/staging/sxg/sxg.h
@@ -782,6 +782,6 @@
#define SIOCSLICSETINTAGG (SIOCDEVPRIVATE+10)
#define SIOCSLICTRACEDUMP (SIOCDEVPRIVATE+11)
-extern struct ethtool_ops sxg_nic_ethtool_ops;
+extern const struct ethtool_ops sxg_nic_ethtool_ops;
#define SXG_COMPLETE_SLOW_SEND_LIMIT 128
#endif /* __SXG_DRIVER_H__ */
diff --git a/drivers/staging/sxg/sxg_ethtool.c b/drivers/staging/sxg/sxg_ethtool.c
index ad89cb8..f5a0706 100644
--- a/drivers/staging/sxg/sxg_ethtool.c
+++ b/drivers/staging/sxg/sxg_ethtool.c
@@ -300,7 +300,7 @@
return 0;
}
-struct ethtool_ops sxg_nic_ethtool_ops = {
+const struct ethtool_ops sxg_nic_ethtool_ops = {
.get_settings = sxg_nic_get_settings,
.set_settings = sxg_nic_set_settings,
.get_drvinfo = sxg_nic_get_drvinfo,
diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c
index 3e8cf08..b905e7b 100644
--- a/drivers/staging/winbond/wb35rx.c
+++ b/drivers/staging/winbond/wb35rx.c
@@ -40,7 +40,8 @@
rx_status.phymode = MODE_IEEE80211B;
*/
- ieee80211_rx_irqsafe(hw, skb, &rx_status);
+ memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+ ieee80211_rx_irqsafe(hw, skb);
}
static void Wb35Rx_adjust(PDESCRIPTOR pRxDes)
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index 90f499e..c273c03 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -354,7 +354,7 @@
p80211_metawep_t p80211_wep;
if (skb == NULL)
- return 0;
+ return NETDEV_TX_OK;
if (wlandev->state != WLAN_DEVICE_OPEN) {
result = 1;
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 0a69672..4e83c29 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -953,7 +953,12 @@
mutex_lock(&tz->lock);
- tz->ops->get_temp(tz, &temp);
+ if (tz->ops->get_temp(tz, &temp)) {
+ /* get_temp failed - retry it later */
+ printk(KERN_WARNING PREFIX "failed to read out thermal zone "
+ "%d\n", tz->id);
+ goto leave;
+ }
for (count = 0; count < tz->trips; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
@@ -1005,6 +1010,8 @@
THERMAL_TRIPS_NONE);
tz->last_temperature = temp;
+
+ leave:
if (tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay);
else if (tz->polling_delay)
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 96fb118..d2de10b 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -35,6 +35,10 @@
#include "u_phonet.h"
#define PN_MEDIA_USB 0x1B
+#define MAXPACKET 512
+#if (PAGE_SIZE % MAXPACKET)
+#error MAXPACKET must divide PAGE_SIZE!
+#endif
/*-------------------------------------------------------------------------*/
@@ -45,6 +49,10 @@
struct f_phonet {
struct usb_function function;
+ struct {
+ struct sk_buff *skb;
+ spinlock_t lock;
+ } rx;
struct net_device *dev;
struct usb_ep *in_ep, *out_ep;
@@ -52,7 +60,7 @@
struct usb_request *out_reqv[0];
};
-static int phonet_rxq_size = 2;
+static int phonet_rxq_size = 17;
static inline struct f_phonet *func_to_pn(struct usb_function *f)
{
@@ -138,7 +146,7 @@
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = cpu_to_le16(512),
+ .wMaxPacketSize = cpu_to_le16(MAXPACKET),
};
static struct usb_endpoint_descriptor
@@ -256,25 +264,15 @@
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
}
- return 0;
+ return NETDEV_TX_OK;
}
static int pn_net_mtu(struct net_device *dev, int new_mtu)
{
- struct phonet_port *port = netdev_priv(dev);
- unsigned long flags;
- int err = -EBUSY;
-
if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
return -EINVAL;
-
- spin_lock_irqsave(&port->lock, flags);
- if (!netif_carrier_ok(dev)) {
- dev->mtu = new_mtu;
- err = 0;
- }
- spin_unlock_irqrestore(&port->lock, flags);
- return err;
+ dev->mtu = new_mtu;
+ return 0;
}
static const struct net_device_ops pn_netdev_ops = {
@@ -308,21 +306,21 @@
static int
pn_rx_submit(struct f_phonet *fp, struct usb_request *req, gfp_t gfp_flags)
{
- struct sk_buff *skb;
- const size_t size = fp->dev->mtu;
+ struct net_device *dev = fp->dev;
+ struct page *page;
int err;
- skb = alloc_skb(size, gfp_flags);
- if (!skb)
+ page = __netdev_alloc_page(dev, gfp_flags);
+ if (!page)
return -ENOMEM;
- req->buf = skb->data;
- req->length = size;
- req->context = skb;
+ req->buf = page_address(page);
+ req->length = PAGE_SIZE;
+ req->context = page;
err = usb_ep_queue(fp->out_ep, req, gfp_flags);
if (unlikely(err))
- dev_kfree_skb_any(skb);
+ netdev_free_page(dev, page);
return err;
}
@@ -330,25 +328,37 @@
{
struct f_phonet *fp = ep->driver_data;
struct net_device *dev = fp->dev;
- struct sk_buff *skb = req->context;
+ struct page *page = req->context;
+ struct sk_buff *skb;
+ unsigned long flags;
int status = req->status;
switch (status) {
case 0:
- if (unlikely(!netif_running(dev)))
- break;
- if (unlikely(req->actual < 1))
- break;
- skb_put(skb, req->actual);
- skb->protocol = htons(ETH_P_PHONET);
- skb_reset_mac_header(skb);
- __skb_pull(skb, 1);
- skb->dev = dev;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
+ spin_lock_irqsave(&fp->rx.lock, flags);
+ skb = fp->rx.skb;
+ if (!skb)
+ skb = fp->rx.skb = netdev_alloc_skb(dev, 12);
+ if (req->actual < req->length) /* Last fragment */
+ fp->rx.skb = NULL;
+ spin_unlock_irqrestore(&fp->rx.lock, flags);
- netif_rx(skb);
- skb = NULL;
+ if (unlikely(!skb))
+ break;
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, 0,
+ req->actual);
+ page = NULL;
+
+ if (req->actual < req->length) { /* Last fragment */
+ skb->protocol = htons(ETH_P_PHONET);
+ skb_reset_mac_header(skb);
+ pskb_pull(skb, 1);
+ skb->dev = dev;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
+
+ netif_rx(skb);
+ }
break;
/* Do not resubmit in these cases: */
@@ -366,8 +376,8 @@
break;
}
- if (skb)
- dev_kfree_skb_any(skb);
+ if (page)
+ netdev_free_page(dev, page);
if (req)
pn_rx_submit(fp, req, GFP_ATOMIC);
}
@@ -385,6 +395,10 @@
usb_ep_disable(fp->out_ep);
usb_ep_disable(fp->in_ep);
+ if (fp->rx.skb) {
+ dev_kfree_skb_irq(fp->rx.skb);
+ fp->rx.skb = NULL;
+ }
}
static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
@@ -583,6 +597,7 @@
fp->function.set_alt = pn_set_alt;
fp->function.get_alt = pn_get_alt;
fp->function.disable = pn_disconnect;
+ spin_lock_init(&fp->rx.lock);
err = usb_add_function(c, &fp->function);
if (err)
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 016f63b..c665219 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -181,7 +181,7 @@
* - ... probably more ethtool ops
*/
-static struct ethtool_ops ops = {
+static const struct ethtool_ops ops = {
.get_drvinfo = eth_get_drvinfo,
.get_link = ethtool_op_get_link,
};
@@ -465,7 +465,8 @@
return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
}
-static int eth_start_xmit(struct sk_buff *skb, struct net_device *net)
+static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
+ struct net_device *net)
{
struct eth_dev *dev = netdev_priv(net);
int length = skb->len;
@@ -487,7 +488,7 @@
if (!in) {
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
/* apply outgoing CDC or RNDIS filters */
@@ -506,7 +507,7 @@
type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
if (!(cdc_filter & type)) {
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
}
/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
@@ -586,7 +587,7 @@
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->req_lock, flags);
}
- return 0;
+ return NETDEV_TX_OK;
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
index 3421d33..2e31f53 100644
--- a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
+++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
@@ -267,7 +267,8 @@
/* netdev interface */
extern int i1480u_open(struct net_device *);
extern int i1480u_stop(struct net_device *);
-extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *);
+extern netdev_tx_t i1480u_hard_start_xmit(struct sk_buff *,
+ struct net_device *);
extern void i1480u_tx_timeout(struct net_device *);
extern int i1480u_set_config(struct net_device *, struct ifmap *);
extern int i1480u_change_mtu(struct net_device *, int);
diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c
index 26bacc0..3db3449 100644
--- a/drivers/uwb/i1480/i1480u-wlp/tx.c
+++ b/drivers/uwb/i1480/i1480u-wlp/tx.c
@@ -503,7 +503,8 @@
*
* @net_dev->xmit_lock is held
*/
-int i1480u_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+netdev_tx_t i1480u_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *net_dev)
{
int result;
struct i1480u *i1480u = netdev_priv(net_dev);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3b54b39..1999b18 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -935,7 +935,7 @@
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -951,7 +951,7 @@
config FB_ATMEL_STN
bool "Use a STN display with AT91/AT32 LCD Controller"
- depends on FB_ATMEL && MACH_AT91SAM9261EK
+ depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
default n
help
Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index da05f08..2830ffd 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -182,7 +182,8 @@
{
unsigned long value;
- if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
+ if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+ || cpu_is_at32ap7000()))
return xres;
value = xres;
@@ -824,7 +825,8 @@
info->fix = atmel_lcdfb_fix;
/* Enable LCDC Clocks */
- if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+ || cpu_is_at32ap7000()) {
sinfo->bus_clk = clk_get(dev, "hck1");
if (IS_ERR(sinfo->bus_clk)) {
ret = PTR_ERR(sinfo->bus_clk);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index f9d19be..90861cd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -110,7 +110,7 @@
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
- default y if MACH_SAM9261EK || MACH_SAM9263EK
+ default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
help
This provides a backlight control internal to the Atmel LCDC
driver. If the LCD "contrast control" on your board is wired
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 15a0ee6..30ae302 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,6 +33,7 @@
#include <linux/math64.h>
#include <mach/imxfb.h>
+#include <mach/hardware.h>
/*
* Complain if VAR is out of range.
@@ -129,6 +130,10 @@
#define LCDISR_EOF (1<<1)
#define LCDISR_BOF (1<<0)
+/* Used fb-mode. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+
+
/*
* These are the bitfields for each
* display depth that we support.
@@ -145,10 +150,6 @@
void __iomem *regs;
struct clk *clk;
- u_int max_bpp;
- u_int max_xres;
- u_int max_yres;
-
/*
* These are the addresses we mapped
* the framebuffer memory region to.
@@ -172,6 +173,9 @@
cmap_static:1,
unused:30;
+ struct imx_fb_videomode *mode;
+ int num_modes;
+
void (*lcd_power)(int);
void (*backlight_power)(int);
};
@@ -298,6 +302,18 @@
return ret;
}
+static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
+{
+ struct imx_fb_videomode *m;
+ int i;
+
+ for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
+ if (!strcmp(m->mode.name, fb_mode))
+ return m;
+ }
+ return NULL;
+}
+
/*
* imxfb_check_var():
* Round up in the following order: bits_per_pixel, xres,
@@ -308,35 +324,81 @@
{
struct imxfb_info *fbi = info->par;
struct imxfb_rgb *rgb;
+ const struct imx_fb_videomode *imxfb_mode;
+ unsigned long lcd_clk;
+ unsigned long long tmp;
+ u32 pcr = 0;
if (var->xres < MIN_XRES)
var->xres = MIN_XRES;
if (var->yres < MIN_YRES)
var->yres = MIN_YRES;
- if (var->xres > fbi->max_xres)
- var->xres = fbi->max_xres;
- if (var->yres > fbi->max_yres)
- var->yres = fbi->max_yres;
- var->xres_virtual = max(var->xres_virtual, var->xres);
- var->yres_virtual = max(var->yres_virtual, var->yres);
+
+ imxfb_mode = imxfb_find_mode(fbi);
+ if (!imxfb_mode)
+ return -EINVAL;
+
+ var->xres = imxfb_mode->mode.xres;
+ var->yres = imxfb_mode->mode.yres;
+ var->bits_per_pixel = imxfb_mode->bpp;
+ var->pixclock = imxfb_mode->mode.pixclock;
+ var->hsync_len = imxfb_mode->mode.hsync_len;
+ var->left_margin = imxfb_mode->mode.left_margin;
+ var->right_margin = imxfb_mode->mode.right_margin;
+ var->vsync_len = imxfb_mode->mode.vsync_len;
+ var->upper_margin = imxfb_mode->mode.upper_margin;
+ var->lower_margin = imxfb_mode->mode.lower_margin;
+ var->sync = imxfb_mode->mode.sync;
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+
+ lcd_clk = clk_get_rate(fbi->clk);
+
+ tmp = var->pixclock * (unsigned long long)lcd_clk;
+
+ do_div(tmp, 1000000);
+
+ if (do_div(tmp, 1000000) > 500000)
+ tmp++;
+
+ pcr = (unsigned int)tmp;
+
+ if (--pcr > 0x3F) {
+ pcr = 0x3F;
+ printk(KERN_WARNING "Must limit pixel clock to %luHz\n",
+ lcd_clk / pcr);
+ }
+
switch (var->bits_per_pixel) {
case 32:
+ pcr |= PCR_BPIX_18;
rgb = &def_rgb_18;
break;
case 16:
default:
- if (fbi->pcr & PCR_TFT)
+ if (cpu_is_mx1())
+ pcr |= PCR_BPIX_12;
+ else
+ pcr |= PCR_BPIX_16;
+
+ if (imxfb_mode->pcr & PCR_TFT)
rgb = &def_rgb_16_tft;
else
rgb = &def_rgb_16_stn;
break;
case 8:
+ pcr |= PCR_BPIX_8;
rgb = &def_rgb_8;
break;
}
+ /* add sync polarities */
+ pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25));
+
+ fbi->pcr = pcr;
+
/*
* Copy the RGB parameters for this display
* from the machine specific parameters.
@@ -393,10 +455,6 @@
writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
- /* physical screen start address */
- writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4),
- fbi->regs + LCDC_VPW);
-
/* panning offset 0 (0 pixel offset) */
writel(0x00000000, fbi->regs + LCDC_POS);
@@ -468,8 +526,6 @@
static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
- unsigned int pcr, lcd_clk;
- unsigned long long tmp;
pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
@@ -505,6 +561,10 @@
info->fix.id, var->lower_margin);
#endif
+ /* physical screen start address */
+ writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4),
+ fbi->regs + LCDC_VPW);
+
writel(HCR_H_WIDTH(var->hsync_len - 1) |
HCR_H_WAIT_1(var->right_margin - 1) |
HCR_H_WAIT_2(var->left_margin - 3),
@@ -518,22 +578,7 @@
writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
fbi->regs + LCDC_SIZE);
- lcd_clk = clk_get_rate(fbi->clk);
- tmp = var->pixclock * (unsigned long long)lcd_clk;
- do_div(tmp, 1000000);
- if (do_div(tmp, 1000000) > 500000)
- tmp++;
- pcr = (unsigned int)tmp;
- if (--pcr > 0x3F) {
- pcr = 0x3F;
- printk(KERN_WARNING "Must limit pixel clock to %uHz\n",
- lcd_clk / pcr);
- }
-
- /* add sync polarities */
- pcr |= fbi->pcr & ~0x3F;
-
- writel(pcr, fbi->regs + LCDC_PCR);
+ writel(fbi->pcr, fbi->regs + LCDC_PCR);
writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
@@ -575,6 +620,8 @@
struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
struct fb_info *info = dev_get_drvdata(&pdev->dev);
struct imxfb_info *fbi = info->par;
+ struct imx_fb_videomode *m;
+ int i;
pr_debug("%s\n",__func__);
@@ -603,35 +650,18 @@
info->fbops = &imxfb_ops;
info->flags = FBINFO_FLAG_DEFAULT |
FBINFO_READS_FAST;
-
- fbi->max_xres = pdata->xres;
- info->var.xres = pdata->xres;
- info->var.xres_virtual = pdata->xres;
- fbi->max_yres = pdata->yres;
- info->var.yres = pdata->yres;
- info->var.yres_virtual = pdata->yres;
- fbi->max_bpp = pdata->bpp;
- info->var.bits_per_pixel = pdata->bpp;
- info->var.nonstd = pdata->nonstd;
- info->var.pixclock = pdata->pixclock;
- info->var.hsync_len = pdata->hsync_len;
- info->var.left_margin = pdata->left_margin;
- info->var.right_margin = pdata->right_margin;
- info->var.vsync_len = pdata->vsync_len;
- info->var.upper_margin = pdata->upper_margin;
- info->var.lower_margin = pdata->lower_margin;
- info->var.sync = pdata->sync;
info->var.grayscale = pdata->cmap_greyscale;
fbi->cmap_inverse = pdata->cmap_inverse;
fbi->cmap_static = pdata->cmap_static;
- fbi->pcr = pdata->pcr;
fbi->lscr1 = pdata->lscr1;
fbi->dmacr = pdata->dmacr;
fbi->pwmr = pdata->pwmr;
fbi->lcd_power = pdata->lcd_power;
fbi->backlight_power = pdata->backlight_power;
- info->fix.smem_len = fbi->max_xres * fbi->max_yres *
- fbi->max_bpp / 8;
+
+ for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++)
+ info->fix.smem_len = max_t(size_t, info->fix.smem_len,
+ m->mode.xres * m->mode.yres * m->bpp / 8);
return 0;
}
@@ -642,9 +672,9 @@
struct fb_info *info;
struct imx_fb_platform_data *pdata;
struct resource *res;
- int ret;
+ int ret, i;
- printk("i.MX Framebuffer driver\n");
+ dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -662,6 +692,9 @@
fbi = info->par;
+ if (!fb_mode)
+ fb_mode = pdata->mode[0].mode.name;
+
platform_set_drvdata(pdev, info);
ret = imxfb_init_fbinfo(pdev);
@@ -684,7 +717,7 @@
fbi->regs = ioremap(res->start, resource_size(res));
if (fbi->regs == NULL) {
- printk(KERN_ERR"Cannot map frame buffer registers\n");
+ dev_err(&pdev->dev, "Cannot map frame buffer registers\n");
goto failed_ioremap;
}
@@ -719,6 +752,13 @@
goto failed_platform_init;
}
+ fbi->mode = pdata->mode;
+ fbi->num_modes = pdata->num_modes;
+
+ INIT_LIST_HEAD(&info->modelist);
+ for (i = 0; i < pdata->num_modes; i++)
+ fb_add_videomode(&pdata->mode[i].mode, &info->modelist);
+
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
@@ -754,7 +794,7 @@
failed_getclock:
iounmap(fbi->regs);
failed_ioremap:
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
failed_req:
kfree(info->pseudo_palette);
failed_init:
@@ -785,7 +825,7 @@
framebuffer_release(info);
iounmap(fbi->regs);
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
clk_disable(fbi->clk);
clk_put(fbi->clk);
@@ -811,8 +851,34 @@
},
};
+static int imxfb_setup(void)
+{
+#ifndef MODULE
+ char *opt, *options = NULL;
+
+ if (fb_get_options("imxfb", &options))
+ return -ENODEV;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ else
+ fb_mode = opt;
+ }
+#endif
+ return 0;
+}
+
int __init imxfb_init(void)
{
+ int ret = imxfb_setup();
+
+ if (ret < 0)
+ return ret;
+
return platform_driver_probe(&imxfb_driver, imxfb_probe);
}
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index ca5b464..e98baf6 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -67,9 +67,8 @@
* find the kernel part of the task struct, copy the registers and
* the buffer contents and then complete the task.
*/
-static void uvesafb_cn_callback(void *data)
+static void uvesafb_cn_callback(struct cn_msg *msg)
{
- struct cn_msg *msg = data;
struct uvesafb_task *utask;
struct uvesafb_ktask *task;
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 15502d5..54cd916 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -454,6 +454,10 @@
xenfb_init_shared_page(info, fb_info);
+ ret = xenfb_connect_backend(dev, info);
+ if (ret < 0)
+ goto error;
+
ret = register_framebuffer(fb_info);
if (ret) {
fb_deferred_io_cleanup(fb_info);
@@ -464,10 +468,6 @@
}
info->fb_info = fb_info;
- ret = xenfb_connect_backend(dev, info);
- if (ret < 0)
- goto error;
-
xenfb_make_preferred_console();
return 0;
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index fdf7285..52ccb3d 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -306,9 +306,8 @@
return error;
}
-static void w1_cn_callback(void *data)
+static void w1_cn_callback(struct cn_msg *msg)
{
- struct cn_msg *msg = data;
struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
struct w1_netlink_cmd *cmd;
struct w1_slave *sl;
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 3fe9742..2f8643e 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -37,7 +37,7 @@
#include <linux/uaccess.h>
#include <asm/addrspace.h>
-#include <asm/ar7/ar7.h>
+#include <asm/mach-ar7/ar7.h>
#define DRVNAME "ar7_wdt"
#define LONGNAME "TI AR7 Watchdog Timer"
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index ec2a39b..7c28434 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -1,6 +1,9 @@
obj-y += grant-table.o features.o events.o manage.o
obj-y += xenbus/
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_features.o := $(nostackp)
+
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
obj-$(CONFIG_XEN_BALLOON) += balloon.o
diff --git a/firmware/Makefile b/firmware/Makefile
index 621de8e..878329c 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,16 +32,20 @@
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
-fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
- bnx2/bnx2-rv2p-09-4.6.15.fw \
- bnx2/bnx2-mips-06-4.6.16.fw \
- bnx2/bnx2-rv2p-06-4.6.16.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.0.21.0.fw bnx2x-e1h-5.0.21.0.fw
+fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j3.fw \
+ bnx2/bnx2-rv2p-09-5.0.0.j3.fw \
+ bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw \
+ bnx2/bnx2-mips-06-5.0.0.j3.fw \
+ bnx2/bnx2-rv2p-06-5.0.0.j3.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
- cxgb3/t3fw-7.4.0.bin
+ cxgb3/t3fw-7.4.0.bin \
+ cxgb3/ael2005_opt_edc.bin \
+ cxgb3/ael2005_twx_edc.bin \
+ cxgb3/ael2020_twx_edc.bin
fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 0f5649a..d9e3a94 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -418,6 +418,23 @@
--------------------------------------------------------------------------
+Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter
+
+File: cxgb3/ael2005_opt_edc.bin.ihex
+File: cxgb3/ael2005_twx_edc.bin.ihex
+File: cxgb3/ael2020_twx_edc.bin.ihex
+
+Licence:
+ * Copyright (c) 2007-2009 NetLogic Microsystems, Inc.
+ *
+ * Permission is hereby granted for the distribution of this firmware
+ * data in hexadecimal or equivalent format, provided this copyright
+ * notice is accompanying it.
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
+
Driver: e100 -- Intel PRO/100 Ethernet NIC
File: e100/d101m_ucode.bin
diff --git a/firmware/bnx2/bnx2-mips-06-4.6.16.fw.ihex b/firmware/bnx2/bnx2-mips-06-4.6.16.fw.ihex
deleted file mode 100644
index 0df10b5..0000000
--- a/firmware/bnx2/bnx2-mips-06-4.6.16.fw.ihex
+++ /dev/null
@@ -1,5805 +0,0 @@
-:10000000080000F80800000000004DA4000000C82F
-:1000100000000000000000000000000008004DA4E7
-:100020000000001400004E6C080000800800000072
-:10003000000056CC00004E800800582000000084CC
-:100040000000A54C080056CC000001340000A5D0EB
-:10005000080031D808000000000070DC0000A70490
-:10006000000000000000000000000000080070DC3C
-:1000700000000024000117E00800048808000400C4
-:100080000000175C000118040000000000000000E0
-:100090000000000000000000000000000000000060
-:1000A000080000980800000000003A7400012F606A
-:1000B0000000000000000000000000000000000040
-:0800C000000000000000000038
-:0800C8000A00003E00000000E8
-:1000D000000000000000000D636F6D342E362E31DD
-:1000E00036000000040610020000000000000003BB
-:1000F00000000014000000320000000300000000B7
-:1001000000000000000000000000000000000000EF
-:1001100000000010000001360000EA60000000014D
-:1001200000000000000000000000000000000008C7
-:1001300000000000000000000000000000000000BF
-:1001400000000000000000000000000000000000AF
-:10015000000000000000000000000000000000009F
-:10016000000000020000000000000000000000008D
-:10017000000000000000000000000000000000007F
-:10018000000000000000000000000010000000005F
-:10019000000000000000000000000000000000005F
-:1001A000000000000000000000000000000000004F
-:1001B000000000000000000000000000000000003F
-:1001C0000000000010000003000000000000000D0F
-:1001D0000000000D3C02080024424DE03C030800F2
-:1001E00024634ED4AC4000000043202B1480FFFD5C
-:1001F000244200043C1D080037BD7FFC03A0F02111
-:100200003C100800261000F83C1C0800279C4DE01C
-:100210000E0002AA000000000000000D3C03601068
-:100220008C6450002402FF7F3C1A8000008220244E
-:100230003484380C24020037AC645000AF4200080C
-:1002400024020C80AF4200243C1B80083C060800BE
-:1002500024C6079C3C02080024424E182404001BBC
-:100260002484FFFFAC4600000481FFFD244200040B
-:100270003C020800244203803C010800AC224E20CE
-:100280003C020800244206803C010800AC224E24B7
-:100290003C02080024420D803C010800AC224E6064
-:1002A0003C02080024420A103C03080024630908A9
-:1002B0003C040800248409443C05080024A53C248F
-:1002C0003C010800AC224E683C0208002442057044
-:1002D0003C010800AC264E643C010800AC254E747D
-:1002E0003C010800AC234E7C3C010800AC224E804F
-:1002F0003C010800AC244E843C010800AC234E1C99
-:100300003C010800AC204E283C010800AC204E2CDB
-:100310003C010800AC204E303C010800AC204E34BB
-:100320003C010800AC204E383C010800AC204E3C9B
-:100330003C010800AC204E403C010800AC244E4477
-:100340003C010800AC204E483C010800AC204E4C5B
-:100350003C010800AC204E503C010800AC204E543B
-:100360003C010800AC204E583C010800AC264E5C15
-:100370003C010800AC204E6C3C010800AC254E70DE
-:100380003C010800AC234E780A0006F4000000008F
-:100390003C0308008C6300208F8200081043000398
-:1003A000000000000A00052CAF83000803E00008ED
-:1003B0000000000027BDFFE8AFB00010AFBF001481
-:1003C00027500100920200091040001A2403000186
-:1003D0003C0208008C42002010400016000018214A
-:1003E0000E00056400000000960300083C060800AB
-:1003F00094C64E968E0400188F8200209605000C3D
-:1004000000031C0000661825AC440000AC45000445
-:1004100024040001AC400008AC40000CAC400010CB
-:10042000AC400014AC4000180E000589AC43001C21
-:10043000000018218FBF00148FB000100060102141
-:1004400003E0000827BD001827BDFFE8AFBF00107C
-:100450009742010830437000240220001062000A15
-:1004600028642001548000128FBF00102402400035
-:1004700010620008240260001062000A8FBF0010A2
-:100480000A0000FB000010218FBF00100A0000BB13
-:1004900027BD00180E0003F6000000000A0000FA55
-:1004A0008FBF00100E000FB6000000008FBF0010BD
-:1004B0000000102103E0000827BD00183C020800DE
-:1004C0008C42002027BDFFE810400027AFBF00107E
-:1004D0000E00056400000000974201089743010CDC
-:1004E0008F8500203042003E3063FFFF0002140081
-:1004F00000431025ACA200008F4201003C0608001A
-:1005000094C64E968FBF0010ACA20004974301160C
-:100510009744010E3C02200000031C003084FFFFC2
-:1005200000641825ACA3000800C2302597420110D2
-:100530009743011224040001000214003063FFFFFE
-:1005400000431025ACA2000C9742011427BD0018EF
-:100550003042FFFFACA20010ACA00014ACA0001809
-:100560000A000589ACA6001C8FBF001003E000083C
-:1005700027BD00183C0208008C42002027BDFFE880
-:100580001040002AAFBF00100E00056400000000FC
-:10059000974201089743010C8F8500203042003EAE
-:1005A0003063FFFF0002140000431025ACA20000DE
-:1005B0008F4201003C06080094C64E968FBF001083
-:1005C000ACA20004974301169744010E3C022000A0
-:1005D00000031C003084FFFF00641825ACA3000852
-:1005E00000C23025974201109743011224040001F4
-:1005F000000214003063FFFF00431025ACA2000C82
-:100600009742011427BD00183042FFFFACA2001032
-:100610008F420118ACA200149342010B304200FF3C
-:10062000ACA200180A000589ACA6001C8FBF001000
-:1006300003E0000827BD001827BDFFE0AFB00010A1
-:10064000AFBF0018AFB10014275001009203000B98
-:100650002402001A961100081462003500002021BF
-:100660003222000110400009000000008E0200004C
-:1006700096030014000211C200021040005A10211B
-:10068000A44300800A000179322200020E00012BEF
-:10069000000000003C0208008C420040244200019F
-:1006A0003C010800AC220040322200020002202B54
-:1006B0003C0208008C420044322300042442000122
-:1006C0003C010800AC2200441060001A8FBF0018E3
-:1006D0008F4202B804410008240400013C020800D3
-:1006E0008C420060244200013C010800AC22006002
-:1006F0000A00019C8FB100148E02002096030016A0
-:1007000000002021AF4202808E020004A743028431
-:10071000AF4202883C021000AF4202B83C0208001F
-:100720008C42005C244200013C010800AC22005CC9
-:100730008FBF00188FB100148FB0001000801021FF
-:1007400003E0000827BD002027BDFFE0AFB0001088
-:10075000AFBF0018AFB10014275001009203000B87
-:1007600024020003961100081462003500002021C5
-:100770003222000110400009000000008E0200003B
-:1007800096030014000211C200021040005A10210A
-:10079000A44300800A0001BD322200020E0000FDC9
-:1007A000000000003C0208008C420040244200018E
-:1007B0003C010800AC220040322200020002202B43
-:1007C0003C0208008C420044322300042442000111
-:1007D0003C010800AC2200441060001A8FBF0018D2
-:1007E0008F4202B804410008240400013C020800C2
-:1007F0008C420060244200013C010800AC220060F1
-:100800000A0001E08FB100148E020020960300164A
-:1008100000002021AF4202808E020004A743028420
-:10082000AF4202883C021000AF4202B83C0208000E
-:100830008C42005C244200013C010800AC22005CB8
-:100840008FBF00188FB100148FB0001000801021EE
-:1008500003E0000827BD00209362000003E00008C9
-:10086000AF80000403E000080000102127BDFFE86E
-:10087000AFBF0014AFB000108F420100AF420020A4
-:100880008F420104AF4200A89350010B0E0001E417
-:10089000321000FF3C02080024424E18001018805D
-:1008A0002E10001C16000004006210210E0001E74B
-:1008B0000A0001FF000000008C4200000040F8091F
-:1008C00000000000104000053C0240008F4301047E
-:1008D0003C026020AC4300143C024000AF420138AF
-:1008E0003C0208008C4200348FBF00148FB000100F
-:1008F000244200013C010800AC22003403E000085F
-:1009000027BD001827BDFFE8AFBF00108F42014090
-:100910000E0001E4AF4200200E0003800000000042
-:100920003C024000AF4201783C03080024630038D9
-:100930008C6200008FBF001027BD00182442000108
-:1009400003E00008AC62000027BDFFE8AFBF001065
-:100950008F4201800E0001E4AF4200208F430180EE
-:1009600024020F0014620005000000008F4201887D
-:10097000A742009C0A0002393C024000936200003A
-:1009800024030050304200FF144300083C024000A2
-:100990000E00036400000000144000043C0240000C
-:1009A0000E000E42000000003C024000AF4201B8C1
-:1009B0003C0208008C42003C8FBF00102442000122
-:1009C0003C010800AC22003C03E0000827BD0018F1
-:1009D00003E00008000010218F4301048F82001003
-:1009E00010430008000000003C0208008C42008414
-:1009F000244200013C010800AC2200848F42010423
-:100A0000AF82001003E000080000000027BDFFE8EF
-:100A1000AFBF001027440100948200083043000259
-:100A2000304200041040001B000000008F4202B85A
-:100A300004410008240500013C0208008C420060CB
-:100A4000244200013C010800AC2200600A0002813F
-:100A50008FBF00108C820020948300160000282194
-:100A6000AF4202808C820004A7430284AF42028816
-:100A70003C021000AF4202B83C0208008C42005C0D
-:100A8000244200013C010800AC22005C0A00028103
-:100A90008FBF001010600008240500013C02080010
-:100AA0008C420084244200013C010800AC220084F6
-:100AB0000A0002818FBF00108F4401000E00024423
-:100AC00000000000000028218FBF001000A01021AE
-:100AD00003E0000827BD00183C0208008C42008893
-:100AE000274301009465000C244200013C010800EA
-:100AF000AC2200888C64001803451021904540000A
-:100B0000AF4400388C62001C2403FFF800052E005F
-:100B10000043102434420004AF42003C3C02000574
-:100B2000AF420030000000000000000000000000A4
-:100B3000AF450404000000000000000000000000B9
-:100B40003C02000634420001AF42003000000000C9
-:100B500000000000000000008F4200003042001042
-:100B60001040FFFD0000102103E00008000000001D
-:100B700027BDFFE0AFBF0018AFB100140E00005555
-:100B8000AFB000103C028000344200708C42000084
-:100B9000AF8200140E0000B2000000003C02800092
-:100BA000344600703C0308008C6300A03C0208003F
-:100BB0008C4200A4104300048F8400143C01080000
-:100BC000AC2300A4A743009E8CCA00003C0308008D
-:100BD0008C6300BC3C0208008C4200B80144202316
-:100BE00000641821000040210064202B00481021DF
-:100BF000004410213C010800AC2300BC3C0108006B
-:100C0000AC2200B88F510000322200071040FFE1F3
-:100C1000AF8A00148CC600003C0508008CA500BCFF
-:100C20003C0408008C8400B800CA302300A62821A8
-:100C30000000102100A6302B0082202100862021F8
-:100C4000322700013C010800AC2500BC3C01080033
-:100C5000AC2400B810E00021322200028F420100D3
-:100C6000AF4200208F420104AF4200A89342010B23
-:100C70000E0001E4305000FF2E02001C544000041E
-:100C8000001010800E0001E70A0002F800000000CA
-:100C90003C03080024634E18004310218C420000DE
-:100CA0000040F80900000000104000053C02400030
-:100CB0008F4301043C026020AC4300143C0240001E
-:100CC000AF4201383C0208008C420034244200014B
-:100CD0003C010800AC220034322200021040000E19
-:100CE000322200048F4201400E0001E4AF42002096
-:100CF0000E000380000000003C024000AF4201787B
-:100D00003C0208008C420038244200013C010800EB
-:100D1000AC220038322200041040FF9B3C028000CD
-:100D20008F4201800E0001E4AF4200208F4301801A
-:100D300024020F0014620005000000008F420188A9
-:100D4000A742009C0A00032D3C0240009362000071
-:100D500024030050304200FF144300083C024000CE
-:100D60000E00036400000000544000043C024000F8
-:100D70000E000E42000000003C024000AF4201B8ED
-:100D80003C0208008C42003C244200013C01080067
-:100D9000AC22003C0A0002B03C0280003C02900001
-:100DA0003442000100822025AF4400208F42002001
-:100DB0000440FFFE0000000003E000080000000007
-:100DC0003C028000344200010082202503E000083C
-:100DD000AF44002027BDFFE0AFB10014AFB000105A
-:100DE00000808821AFBF00180E00033530B000FF2F
-:100DF0009362007D0220202102028025A370007DE5
-:100E00008F7000743C0280000E00033E02028024BA
-:100E1000160000098FBF00188F4201F80440FFFE42
-:100E200024020002AF5101C0A34201C43C021000E1
-:100E3000AF4201F88FBF00188FB100148FB00010BF
-:100E400003E0000827BD002027BDFFD000001021CF
-:100E500003E0000827BD003027BDFFE8AFBF00104A
-:100E6000974201843042020010400005000020211A
-:100E70000E001079000000000A000378240400012D
-:100E80008F420188044000098FBF00108F42018803
-:100E90003C03FF00004310243C0304001443000300
-:100EA000240400019362003E8FBF001000801021D7
-:100EB00003E0000827BD0018A36000228F44014012
-:100EC0000A0003432405000127BDFFE8AFBF00145B
-:100ED000AFB000109362000024030020304200FFF6
-:100EE0001043000B00000000936200002403003058
-:100EF000304200FF10430006000000009362000033
-:100F000024030050304200FF144300628FBF0014DE
-:100F100093420148304200FF2443FFFF2C6200054A
-:100F20001040005C8FBF0014000310803C030800D9
-:100F300024634DA4004310218C42000000400008AF
-:100F4000000000000E0003358F4401408F70000C3C
-:100F50008F4201441602000224020001AF62000C1D
-:100F60000E00033E8F4401408F42014414500004A0
-:100F70008FBF00148FB000100A000FED27BD0018BE
-:100F80008F62000C0A0003EC000000009762001062
-:100F90008F4301443042FFFF14620009000000004B
-:100FA00024020001A76200108F420140AF420200FC
-:100FB0003C021000AF4202380A0003F38FBF001456
-:100FC000976200100A0003EC000000000E000335D9
-:100FD0008F440140976200128F4301443050FFFF5D
-:100FE0001603000224020001A76200120E00033E55
-:100FF0008F4401408F420144160200048FBF001449
-:101000008FB000100A00037C27BD00189762001201
-:101010000A0003EC00000000976200148F430144B3
-:101020003042FFFF146200068FBF0014240200014B
-:101030008FB00010A76200140A00131927BD001812
-:10104000976200140A0003EC00000000976200168B
-:101050008F4301443042FFFF146200062402000166
-:101060008FBF00148FB00010A76200160A000BE0BB
-:1010700027BD001897620016144000068FBF0014A9
-:101080003C0208008C420070244200013C01080030
-:10109000AC2200708FB0001003E0000827BD0018DC
-:1010A00027BDFFE8AFBF0014AFB0001093430109A4
-:1010B0002402001F8F500100106200A5286200204A
-:1010C00010400018240200382862000A1040000C6A
-:1010D0002402000B286200081040002C00000000D1
-:1010E000046000E728620002144000282402000681
-:1010F000106200268FBF00140A0004F08FB00010A9
-:101100001062005E2862000B144000DE8FBF0014E6
-:101110002402000E106200738FB000100A0004F069
-:1011200000000000106200C2286200391040000A6E
-:101130002402008024020036106200CC28620037AE
-:10114000104000B624020035106200C38FBF0014A7
-:101150000A0004F08FB000101062002B286200819A
-:1011600010400006240200C824020039106200B6B4
-:101170008FBF00140A0004F08FB0001010620099B5
-:101180008FBF00140A0004F08FB000103C0208006A
-:101190008C420020104000BB8FBF00140E0005647D
-:1011A000000000008F4201008F8300209745010C52
-:1011B00097460108AC6200008F4201043C0408001D
-:1011C00094844E9600052C00AC6200048F420118F6
-:1011D0000006340000C43025AC6200088F42011CB8
-:1011E00024040001AC62000C9342010A00A22825ED
-:1011F000AC650010AC600014AC600018AC66001C5C
-:101200000A0004C48FBF00143C0208008C42002076
-:101210001040009C8FBF00140E0005640000000009
-:10122000974401083C03080094634E969745010CCF
-:10123000000422029746010E8F820020000426003F
-:101240000083202500052C003C03008000A62825F3
-:1012500000832025AC400000AC400004AC400008F6
-:10126000AC40000CAC450010AC400014AC40001881
-:10127000AC44001C0A0004C3240400019742010C82
-:101280001440001500000000936200053042001079
-:1012900014400011000000000E0003350200202160
-:1012A0009362000502002021344200100E00033E2C
-:1012B000A36200059362000024030020304200FF77
-:1012C0001043006F020020218FBF00148FB0001068
-:1012D0000A00108F27BD00180000000D0A0004EF5F
-:1012E0008FBF00143C0208008C42002010400065B3
-:1012F0008FBF00140E000564000000008F4201043F
-:101300008F8300209744010C3C05080094A54E965D
-:10131000AC6200009762002C000424003042FFFF02
-:10132000008220253C02400E00A22825AC64000467
-:10133000AC600008AC60000CAC600010AC60001445
-:10134000AC600018AC65001C0A0004C32404000152
-:101350000E00033502002021A76000080E00033EA6
-:1013600002002021020020210E0003432405000179
-:101370003C0208008C420020104000428FBF001445
-:101380000E000564000000009742010C8F830020CE
-:101390003C05080094A54E9600021400AC700000B5
-:1013A000AC620004AC6000088F64004C3C02401F3B
-:1013B00000A22825AC64000C8F62005024040001B8
-:1013C000AC6200108F620054AC620014AC60001874
-:1013D000AC65001C8FBF00148FB000100A00058997
-:1013E00027BD00189362000024030020304200FF54
-:1013F000104300248FBF00140E000FD702002021DD
-:10140000104000208FBF0014020020218FB0001078
-:10141000000028210A00034327BD001802002021F4
-:101420008FBF00148FB000100A00065127BD0018AE
-:101430009745010C020020218FBF00148FB00010CF
-:101440000A00067127BD0018020020218FB000108D
-:101450000A00069627BD00189345010D02002021C1
-:101460008FB000100A0006E027BD001802002021FE
-:101470008FBF00148FB000100A0006BC27BD0018F3
-:101480008FBF00148FB0001003E0000827BD0018C4
-:101490008F4202780440FFFE34820080AF42024057
-:1014A00024020002A34202443C02100003E00008B0
-:1014B000AF4202783C04080094844EA23C0208002B
-:1014C0008C424EAC3083FFFF000318C00043102154
-:1014D000AF42003C3C0208008C424EA8AF420038AC
-:1014E0003C02005034420008AF42003000000000CF
-:1014F00000000000000000008F4200003042002089
-:101500001040FFFD000000008F4204003C01080075
-:10151000AC224E988F4204043C010800AC224E9C41
-:101520003C020020AF420030000000003C020800F6
-:1015300094424EA03C03080094634EA43C0508006E
-:1015400094A54EA624840001004310213083FFFFA0
-:101550003C010800A4224EA03C010800A4244EA295
-:1015600014650003000000003C010800A4204EA206
-:1015700003E00008000000003C05000A27BDFFE86A
-:10158000034528213C04080024844E88AFBF001086
-:101590000E0005EE2406000A3C02080094424E8A22
-:1015A0003C03080094634EA63042000F244200031F
-:1015B0000043180424027FFF0043102B1040000258
-:1015C000AF83001C0000000D0E0004FB00000000B3
-:1015D0003C02080094424E928FBF001027BD0018B5
-:1015E00003E00008A74200A23C02000A03421021C7
-:1015F000944300063C02080094424E923C010800CD
-:10160000A4234E8E004310238F83001C000214007D
-:10161000000214030043102B03E0000838420001CD
-:1016200027BDFFE8AFBF00103C02000A03421021B3
-:10163000944200063C010800A4224E8E0E0005488C
-:10164000000000005440FFF93C02000A8FBF001068
-:1016500003E0000827BD001827BDFFE8AFBF00105A
-:101660000E000548000000001040000300000000CC
-:101670000E000556000000003C0208008C424E9807
-:101680008FBF001027430400AF4200383C0208001F
-:101690008C424E9C27BD0018AF830020AF42003C17
-:1016A0003C020005AF42003003E00008AF800018A4
-:1016B0008F8200183C0300060002114000431025F1
-:1016C000AF420030000000000000000000000000F9
-:1016D0008F420000304200101040FFFD27420400FE
-:1016E000AF82002003E00008AF8000183C0608002D
-:1016F0008CC64E9C8F8500188F8300203C0208000A
-:1017000094424E9227BDFFE024A5000124630020EF
-:101710002442000124C70020AFB10014AFB0001074
-:10172000AFBF0018AF850018AF8300203C01080050
-:10173000A4224E92309000FF3C010800AC274E9C42
-:1017400004C100080000882104E000060000000039
-:101750003C0208008C424E98244200013C010800E3
-:10176000AC224E983C02080094424E923C03080082
-:1017700094634EA00010202B004310262C42000141
-:1017800000441025144000048F8300182402001028
-:101790001462000F000000000E00057A2411000101
-:1017A0003C03080094634E923C02080094424EA011
-:1017B00014620003000000000E0004FB00000000A3
-:1017C00016000003000000000E0005640000000089
-:1017D0003C03080094634E963C02080094424E94E9
-:1017E000246300013064FFFF3C010800A4234E96EF
-:1017F00014820003000000003C010800A4204E9663
-:1018000012000006000000003C02080094424E92C4
-:10181000A74200A20A0005DC022010210E000548A4
-:101820000000000010400004022010210E000556A8
-:1018300000000000022010218FBF00188FB100149B
-:101840008FB0001003E0000827BD00203084FFFFA8
-:1018500030A5FFFF000018211080000700000000E5
-:10186000308200011040000200042042006518216F
-:101870000A0005E40005284003E00008006010218C
-:1018800010C0000624C6FFFF8CA2000024A500049F
-:10189000AC8200000A0005EE2484000403E0000886
-:1018A0000000000010A0000824A3FFFFAC86000089
-:1018B00000000000000000002402FFFF2463FFFF7F
-:1018C0001462FFFA2484000403E000080000000012
-:1018D00024020001AF62000CA7620010A762001290
-:1018E000A762001403E00008A76200163082007FA0
-:1018F000034210213C08000E004818213C02080059
-:101900008C42002027BDFFD82407FF80AFB3001C06
-:10191000AFB20018AFB10014AFB00010AFBF0020DD
-:101920000080802130B100FF0087202430D200FFEA
-:101930001040002F00009821AF44002C906200005E
-:1019400024030050304200FF1443000E000000004A
-:101950003C0208008C4200E00202102100471024E3
-:10196000AF42002C3C0208008C4200E00202102131
-:101970003042007F0342102100481021944200D4DD
-:101980003053FFFF0E000564000000003C02080019
-:1019900094424E968F8300200011340000C23025FF
-:1019A00000122C003C02400000C2302534A500018A
-:1019B000AC7000008FBF0020AC6000048FB2001834
-:1019C000AC7300088FB10014AC60000C8FB3001C26
-:1019D000AC6500108FB00010AC600014240400014E
-:1019E000AC60001827BD00280A000589AC66001C01
-:1019F0008FBF00208FB3001C8FB200188FB100146E
-:101A00008FB0001003E0000827BD00289343010FAA
-:101A1000240200101062000E2865001110A00007BB
-:101A200024020012240200082405003A1062000675
-:101A30000000302103E0000800000000240500350C
-:101A40001462FFFC000030210A00060900000000BB
-:101A50008F42007424420FA003E00008AF62000C24
-:101A600027BDFFE8AFBF00100E00034324050001AF
-:101A70008FBF001024020001A762001227BD0018CA
-:101A80002402000103E00008A360002227BDFFE05C
-:101A9000AFB10014AFB00010AFBF001830B1FFFFFE
-:101AA0000E000335008080219362003F2403000470
-:101AB000304200FF1443000C0200202112200008D5
-:101AC0002402000A0E0006020000000093620005D6
-:101AD0002403FFFE00431024A36200052402001229
-:101AE000A362003F020020210E00033EA36000819C
-:101AF00016200003020020210E00066600000000F0
-:101B000002002021322600FF8FBF00188FB1001481
-:101B10008FB00010240500380A00060927BD0020F8
-:101B200027BDFFE0AFBF001CAFB20018AFB100147B
-:101B3000AFB000100E000335008080210E000602B9
-:101B4000000000009362003F24120018305100FF93
-:101B5000123200030200202124020012A362003F7F
-:101B6000936200052403FFFE004310240E00033E91
-:101B7000A362000502002021240500201632000780
-:101B8000000030218FBF001C8FB200188FB10014ED
-:101B90008FB000100A00034327BD00208FBF001C38
-:101BA0008FB200188FB100148FB0001024050039D7
-:101BB0000A00060927BD002027BDFFE8AFB00010CE
-:101BC000AFBF00149742010C24050036008080212D
-:101BD00014400010304600FF0E00033500000000E6
-:101BE00024020012A362003F9362000534420010F9
-:101BF0000E000602A36200050E00033E0200202133
-:101C0000020020210E000343240500200A0006D50F
-:101C1000000000000E000609000000000E00033561
-:101C200002002021936200232403FF9F0200202151
-:101C3000004310248FBF00148FB00010A362002354
-:101C40000A00033E27BD001827BDFFE0AFBF001804
-:101C5000AFB10014AFB0001030B100FF0E0003357B
-:101C600000808021240200120E000602A362003FC1
-:101C70000E00033E0200202102002021022030211C
-:101C80008FBF00188FB100148FB0001024050035ED
-:101C90000A00060927BD0020A380002C03E00008ED
-:101CA000A380002D8F4202780440FFFE8F82003413
-:101CB000AF42024024020002A34202443C02100050
-:101CC00003E00008AF4202783C0360008C625400DD
-:101CD000304200081440FFFD000000008C625408F0
-:101CE000AF82000024020052AC605408AC6454304F
-:101CF000AC6254342402000803E00008AC625400D3
-:101D00003C0260008C425400304200081040000544
-:101D10003C0360008C625400304200081440FFFD18
-:101D2000000000008F8300003C02600003E0000818
-:101D3000AC43540890A30000240200050080402119
-:101D40003063003F0000482114620005000050216C
-:101D500090A2001C94A3001E304900FF306AFFFFD0
-:101D6000AD00000CAD000010AD0000249502001481
-:101D70008D05001C8D0400183042FFFF0049102320
-:101D800000021100000237C30040382100862023E2
-:101D900000A2102B0082202300A72823AD05001CE1
-:101DA000AD040018A5090014A5090020A50A001615
-:101DB00003E00008A50A00228F4201F80440FFFE5C
-:101DC00024020002AF4401C0A34201C43C0210003F
-:101DD00003E00008AF4201F83C0208008C4200B466
-:101DE00027BDFFE8AFBF001424420001AFB00010D0
-:101DF0003C010800AC2200B48F4300243C02001FC9
-:101E000030AA00FF3442FF8030D800FF00628024F7
-:101E10000080F82130EF00FF1158003B01405821AD
-:101E2000240CFF803C19000A3163007F000310C0BE
-:101E300000031940006218213C0208008C4200DCBB
-:101E400025680001310D007F03E2102100431021BD
-:101E50003043007F03431821004C102400794821AF
-:101E6000AF4200248D220024016C1824006C7026DF
-:101E7000AD22000C8D220024310800FFAD2200109D
-:101E800095220014952300208D27001C3042FFFF6F
-:101E90003063FFFF8D26001800431023000211005D
-:101EA000000227C30040282100C4302300E2102B89
-:101EB00000C2302300E53823AD27001CAD260018F2
-:101EC00095220020A522001495220022154B000A1D
-:101ED000A52200168D2300248D220008254600012E
-:101EE000314500801462000430C4007F108F00026E
-:101EF00038AA008000C0502151AF000131C800FF56
-:101F00001518FFC9010058218F8400343082007FEA
-:101F1000034218213C02000A006218212402FF80BB
-:101F200000822024AF440024A06A0079A06A0083C4
-:101F30008C6200508F840034AC6200708C65007439
-:101F40003C027FFF3442FFFF00A228240E00073C22
-:101F5000AC650074AF5000248FBF00148FB0001028
-:101F600003E0000827BD001827BDFFC0AFBE003842
-:101F7000AFB70034AFB5002CAFB20020AFB1001C3A
-:101F8000AFB00018AFBF003CAFB60030AFB4002810
-:101F9000AFB300248F4500248F4600288F43002CC8
-:101FA0003C02001F3442FF800062182400C230242B
-:101FB0000080A821AFA3001400A2F0240E000700A7
-:101FC000AFA600103C0208008C4200E02410FF8005
-:101FD0000360882102A2102100501024AF42002487
-:101FE0003C0208008C4200E002A210213042007F37
-:101FF000034218213C02000A00629021924200D262
-:1020000093630084305700FF306300FF2402000117
-:1020100010620034036020212402000214620036A2
-:10202000000000000E0012E50240282192230083E8
-:10203000922200833063007F3042007F000210C094
-:1020400000031940006218213C0208008C4200DCA9
-:1020500002A210210043382100F01024AF420028D2
-:10206000922500789224008330E2007F03421821F9
-:102070003C02000C14850007006280212402FFFF4F
-:10208000A24200F12402FFFFA64200F20A0007F874
-:102090002402FFFF96020020A24200F196020022D5
-:1020A000A64200F28E020024AE4200F49222008387
-:1020B000A24200F08E4200C8AE4200FC8E4200C434
-:1020C000AE4200F88E220050AE4201008E4200CC9B
-:1020D000AE420104922200853042003F0A000853BC
-:1020E000344200400E00130802402821922200854D
-:1020F0000A0008533042003F936200852403FFDF4B
-:102100003042003FA36200859362008500431024A3
-:10211000A36200859363008393620078307400FFAC
-:10212000304200FF10540036240AFF803C0C000CA3
-:102130003283007F000310C00003194000621821A1
-:102140003C0208008C4200DC268800013109007F37
-:1021500002A210210043382130E2007F03421821FF
-:1021600000EA1024AF420028006C80218E02002477
-:10217000028A1824006A5826AE02000C8E0200243F
-:10218000310800FFAE0200109602001496030020F2
-:102190008E07001C3042FFFF3063FFFF8E060018E1
-:1021A0000043102300021100000227C30040282131
-:1021B00000C4302300E2102B00C2302300E5382396
-:1021C000AE07001CAE06001896020020A6020014FE
-:1021D00096020022A602001692220079304200FFE9
-:1021E000105400070000000051370001316800FF63
-:1021F00092220078304200FF1448FFCD0100A02158
-:1022000092220083A22200798E2200500A0008B395
-:10221000AE220070A22200858E22004C2405FF8091
-:10222000AE42010C9222008534420020A222008599
-:10223000924200D13C0308008C6300DC305400FF64
-:102240003C0208008C4200E400143140001420C01D
-:1022500002A3182100C4202102A210210064382109
-:10226000004610210045182400E52824AF45002829
-:10227000AF43002C3042007F924400D030E3007F17
-:1022800003422821034318213C02000C00628021F4
-:102290003C02000E309600FF00A298211296002A00
-:1022A000000000008E02000C0200202102602821A4
-:1022B00010400025261000280E00071B000000001B
-:1022C0009262000D26830001307400FF3042007FCF
-:1022D000A262000D2404FF801697FFF026730020F1
-:1022E0003C0208008C4200DC0000A02102A2102168
-:1022F00000441024AF4200283C0208008C4200E455
-:102300003C0308008C6300DC02A21021004410246E
-:10231000AF42002C3C0208008C4200E402A31821CA
-:102320003063007F02A210213042007F034220214F
-:10233000034318213C02000C006280213C02000E85
-:102340000A000875008298218E4200D8AE22005003
-:102350008E4200D8AE22007092250083924600D1B2
-:1023600092230083924400D12402FF8000A22824FB
-:102370003063007F308400FF00A628250064182AFF
-:102380001060000230A500FF38A50080A225008360
-:10239000A22500790E00070E000000009222007EA8
-:1023A00002A02021A222007A8E2300743C027FFF2B
-:1023B0003442FFFF006218240E00073CAE23007475
-:1023C0008FA20010AF5E00248FBF003CAF420028F8
-:1023D0008FBE00388FA200148FB700348FB6003044
-:1023E0008FB5002C8FB400288FB300248FB200204B
-:1023F0008FB1001C8FB0001827BD004003E000081B
-:10240000AF42002C90A2000024420001A0A20000D4
-:102410003C0308008C6300F4304200FF1443000FBB
-:1024200000803021A0A000003C0208008C4200E4A3
-:102430008F840034008220213082007F03421821E3
-:102440003C02000C006218212402FF80008220243C
-:10245000ACC3000003E00008AF4400288C820000F9
-:102460002442002003E00008AC82000094C2000077
-:102470003C080800950800CA30E7FFFF00804821AB
-:1024800001021021A4C2000094C200003042FFFFEC
-:1024900000E2102B54400001A4C7000094A20000E9
-:1024A0003C0308008C6300CC24420001A4A200007D
-:1024B00094A200003042FFFF544300078F8600289B
-:1024C0000107102BA4A00000544000010100382196
-:1024D000A4C700008F8600288CC4001CAF44003CB9
-:1024E00094A200008F43003C3042FFFF000210C066
-:1024F00000621821AF43003C8F42003C0082202341
-:1025000018800004000000008CC200180A000914A2
-:10251000244200018CC20018AF4200383C02005037
-:1025200034420010AF420030000000000000000004
-:10253000000000008F420000304200201040FFFDEC
-:10254000000000008F420404AD2200048F4204000A
-:10255000AD2200003C020020AF42003003E0000842
-:102560000000000027BDFFE0AFB20018AFB10014BB
-:10257000AFB00010AFBF001C94C2000000C08021AB
-:102580003C120800965200C624420001A602000038
-:102590009603000094E2000000E03021144300059F
-:1025A0008FB100300E0008E9024038210A000946C8
-:1025B000000000008C8300048C8200042442004050
-:1025C00004610007AC8200048C8200040440000413
-:1025D000000000008C82000024420001AC82000058
-:1025E000960200003042FFFF50520001A60000009A
-:1025F0009622000024420001A62200008F820028BB
-:102600009623000094420016144300048FBF001C60
-:1026100024020001A62200008FBF001C8FB2001808
-:102620008FB100148FB0001003E0000827BD002018
-:102630008F89002827BDFFE0AFBF00188D2200283A
-:102640002748040030E700FFAF4200388D22002CFD
-:10265000AF880030AF42003C3C020005AF42003082
-:10266000000000000000000000000000000000006A
-:1026700000000000000000008C82000C8C82000C26
-:10268000AD0200008C820010AD0200048C820018A4
-:10269000AD0200088C82001CAD02000C8CA200145C
-:1026A000AD0200108C820020AD0200149082000563
-:1026B000304200FF00021200AD0200188CA2001888
-:1026C000AD02001C8CA2000CAD0200208CA20010F8
-:1026D000AD0200248CA2001CAD0200288CA20020B8
-:1026E000AD02002CAD060030AD000034978300260B
-:1026F0003402FFFF14620002006020213404FFFF57
-:1027000010E00011AD040038952300369524003602
-:10271000240200013063FFFF000318C20069182182
-:1027200090650040308400070082100400451025A9
-:10273000A06200408F820028944200563042FFFF82
-:102740000A0009ADAD02003C952300369524003601
-:10275000240200013063FFFF000318C20069182142
-:1027600090650040308400070082100400021027AA
-:1027700000451024A0620040AD00003C00000000B5
-:1027800000000000000000003C020006344200404F
-:10279000AF42003000000000000000000000000018
-:1027A0008F420000304200101040FFFD8F8600284D
-:1027B000AF88003024C2005624C7003C24C400283F
-:1027C00024C5003224C600360E000927AFA200102F
-:1027D0008FBF001803E0000827BD00208F8300246E
-:1027E0003C0508008CA500E88F82003430633FFF71
-:1027F0000003198000451021004310212403FF80AD
-:102800003045007F00431024AF42002803451821C3
-:102810003C02000C0062302190C2000D0000382103
-:1028200034420010A0C2000D8F8900288F8A002436
-:1028300095230036000A1382304800032402000169
-:10284000A4C3000E1102000B290200021040000573
-:10285000240200021100000C240300010A0009F008
-:102860000000182111020006000000000A0009F013
-:10287000000018218CC2002C0A0009F0244300013A
-:102880008CC20014244300018CC200180043102B9A
-:1028900014400003000000000A0009F924070001A9
-:1028A0009522003E24420001A522003E000A138228
-:1028B000304300032C6200021040000900802821F0
-:1028C000146000040000000094C200360A000A09E7
-:1028D0003046FFFF8CC600380A000A090080282114
-:1028E000000030213C04080024844EB00A00095A3C
-:1028F00000000000274901008D22000C95230006EE
-:1029000001202021000216023045003F3063FFFF06
-:102910002402002728A6002810A2000EAF8300245E
-:1029200010C00008240200312402002110A2000976
-:102930002402002510A200079382002D0A000A2716
-:102940000000000010A200059382002D0A000A2753
-:10295000000000000A0009C5000000000A0006F798
-:102960000000000095230006912400058D25000C31
-:102970008D2600108D2700188D28001C8D29002021
-:10298000244200013C010800A4234EB63C0108008B
-:10299000A0244EB53C010800AC254EBC3C0108000B
-:1029A000AC264EC03C010800AC274EC83C010800D4
-:1029B000AC284ECC3C010800AC294ED003E0000806
-:1029C000A382002D8F87002827BDFFC0AFB300343E
-:1029D000AFB20030AFB1002CAFB00028AFBF0038AD
-:1029E0003C0208008C4200D094E3003030B0FFFF7E
-:1029F000005010073045FFFF3063FFFF00C09821F3
-:102A0000A7A200103C110800963100C614A30006CE
-:102A10003092FFFF8CE2002424420030AF42003CA1
-:102A20000A000A608CE2002094E200323042FFFF8C
-:102A300054A2000827A400188CE2002C2442003085
-:102A4000AF42003C8CE20028AF4200380A000A6E18
-:102A50008F84002827A5001027A6002002203821F7
-:102A60000E0008E9A7A000208FA200182442003021
-:102A7000AF4200388FA2001CAF42003C8F84002878
-:102A80003C020005AF42003094820034274304002A
-:102A90003042FFFF0202102B14400007AF830030CA
-:102AA00094820054948300340202102100431023C6
-:102AB0000A000A823043FFFF94830054948200345A
-:102AC0000223182100501023006218233063FFFFF7
-:102AD000948200163042FFFF144300030000000000
-:102AE0000A000A9024030001948200163042FFFF7E
-:102AF0000043102B104000058F8200309482001696
-:102B0000006210233043FFFF8F820030AC5300007F
-:102B1000AC400004AC520008AC43000C3C02000680
-:102B200034420010AF4200300000000000000000FE
-:102B3000000000008F420000304200101040FFFDF6
-:102B4000001018C20064182190650040320400078C
-:102B5000240200018FBF00388FB300348FB20030E1
-:102B60008FB1002C8FB00028008210040045102582
-:102B700027BD004003E00008A062004027BDFFA879
-:102B8000AFB60050AFB5004CAFB40048AFB300448F
-:102B9000AFB1003CAFBF0054AFB20040AFB000389F
-:102BA0008C9000003C0208008C4200E88F860034C4
-:102BB000960300022413FF8000C2302130633FFFE0
-:102BC0000003198000C3382100F3102490B20000E4
-:102BD000AF42002C9203000230E2007F034230211A
-:102BE0003C02000E00C28821306300C02402004075
-:102BF0000080A82100A0B021146200260000A021BE
-:102C00008E3400388E220018144000022402000185
-:102C1000AE2200189202000D304200201440001530
-:102C20008F8200343C0308008C6300DC001238C043
-:102C3000001231400043102100C7302100463821E6
-:102C400030E300073C02008030E6007800C2302507
-:102C50000343182100F31024AF4208002463090045
-:102C6000AF4608108E2200188C6300080043102124
-:102C7000AE2200188E22002C8E2300182442000160
-:102C80000062182B1060003D000000000A000B4499
-:102C900000000000920300022402FFC00043102441
-:102CA000304200FF1440000524020001AE2200184B
-:102CB000962200360A000B2D3054FFFF8E2200149E
-:102CC00024420001AE220018920200000002160009
-:102CD00000021603044100290000000096020002D1
-:102CE00027A4001000802821A7A200169602000247
-:102CF00024070001000030213042FFFFAF82002492
-:102D00000E00095AAFA0001C960300023C04080004
-:102D10008C8400E88F82003430633FFF0003198009
-:102D200000441021004310213043007F3C05000C7B
-:102D30000053102403431821AF42002800651821D6
-:102D40009062000D001221403042007FA062000D11
-:102D50003C0308008C6300E48F82003400431021A0
-:102D60000044382130E2007F034210210045102149
-:102D700000F31824AF430028AEA200009222000DF9
-:102D8000304200101040001302A020218F83002841
-:102D90008EA40000028030219462003E2442FFFF96
-:102DA000A462003E948400029625000E3084FFFF4A
-:102DB0000E000A3F30A5FFFF8F82002894430034A5
-:102DC0009622000E1443000302A0202124020001D9
-:102DD000A382002C02C028210E0008CF00000000B2
-:102DE0008FBF00548FB600508FB5004C8FB4004891
-:102DF0008FB300448FB200408FB1003C8FB00038D9
-:102E000003E0000827BD00588F85002827BDFFD0AC
-:102E1000AFB40028AFB20020AFBF002CAFB3002486
-:102E2000AFB1001CAFB0001890A800D090A600D1A0
-:102E30003C0208008C4200E48F83003430C700FF5E
-:102E4000A3A600100062182100071140006218219B
-:102E50003062007F034220213C02000C00822021CE
-:102E60002402FF8000621824311200FF8CB100D8C8
-:102E7000AFA400148CB300DC0000A021AF430028F5
-:102E800010F2001F240200018FA6001427A40014D2
-:102E900027A500108CC2000402228021027010239A
-:102EA000044000172402000190C3000D2402FF809B
-:102EB00000431024304200FF144000070200882124
-:102EC00090C2000D344200400E0008CFA0C2000D99
-:102ED0000A000B8B93A200100E000AAD241400010F
-:102EE0008F830028AC7000D893A20010A06200D19C
-:102EF00093A200101452FFE58FA6001424020001D3
-:102F0000168200048FBF002C0E0006F700000000A0
-:102F10008FBF002C8FB400288FB300248FB2002005
-:102F20008FB1001C8FB0001803E0000827BD0030EF
-:102F300027BDFFD8AFB3001CAFB20018AFB100146B
-:102F4000AFB00010AFBF00200080982100E08021CA
-:102F500030B1FFFF0E00056430D200FF000000001A
-:102F600000000000000000008F820020AC51000033
-:102F7000AC520004AC530008AC40000CAC40001054
-:102F8000AC400014AC4000183C03080094634E961B
-:102F900002038025AC50001C00000000000000006F
-:102FA00000000000240400018FBF00208FB3001C2C
-:102FB0008FB200188FB100148FB000100A0005897D
-:102FC00027BD002827BDFFE8AFB00010AFBF001439
-:102FD00030A5FFFF30C600FF0080802124020C8056
-:102FE000AF420024000000000000000000000000CC
-:102FF00000000000000000000E000B9A000000001E
-:103000003C040800248400E08C8200002403FF803C
-:103010008FBF00140202102100431024AF4200248D
-:103020008C8200003C03000A020280213210007FE3
-:10303000035010218FB000100043102127BD00184D
-:1030400003E00008AF82002827BDFFE8AFBF0010F3
-:103050008F4401403C0308008C6300E02402FF80A1
-:10306000AF8400340083182100621024AF42002492
-:103070003C02000803424021950500023063007FB6
-:103080003C02000A034318210062182130A5FFFF0B
-:103090003402FFFF000030213C07602010A2000630
-:1030A000AF8300282402FFFFA5020002946500D42C
-:1030B0000E000BBF30A5FFFF8FBF001024020C8055
-:1030C00027BD001803E00008AF4200243C020008BE
-:1030D00003424021950200023C0A0800954A00C6BE
-:1030E0003046FFFF14C000073402FFFF8F82002824
-:1030F0008F8400343C076020944500D40A000C28DB
-:1031000030A5FFFF10C200248F87002894E20054EE
-:1031100094E400163045FFFF00A6102300A6182BEC
-:103120003089FFFF106000043044FFFF00C510230A
-:10313000012210233044FFFF008A102B1040000CA6
-:10314000012A102324020001A50200162402FFFF19
-:10315000A502000294E500D48F84003400003021E1
-:1031600030A5FFFF3C0760200A000BBF00000000F5
-:103170000044102A104000080000000095020016CC
-:103180003042000110400004000000009742007E21
-:1031900024420014A502001603E00008000000000D
-:1031A0008F84002827BDFFE0AFBF00189482003451
-:1031B0009483003E1060001A3048FFFF9383002C78
-:1031C00024020001146200278FBF00188F8200289C
-:1031D000000818C231080007006218212447003A8D
-:1031E000244900542444002024450030244600345F
-:1031F00090620040304200FF01021007304200019F
-:10320000104000168FBF00180E000927AFA900104C
-:103210008F820028944200340A000C413048FFFF9E
-:1032200094830036948200341043000E8FBF001840
-:1032300094820036A482003494820056A482005402
-:103240008C82002CAC82002494820032A482003054
-:103250009482003CA482003A8FBF00180A000C013F
-:1032600027BD002003E0000827BD002027BDFFE8A0
-:10327000AFBF00108F4A01003C0508008CA500E09C
-:103280003C02080090424EBC3C0C0800958C4EB6A7
-:1032900001452821304B003F30A2007F03424021EE
-:1032A000396900323C02000A3963003F2C63000197
-:1032B000010240212D2900012402FF8000A22824C0
-:1032C00001234825AF8A003400801821AF4500242F
-:1032D000000030210080282124070001AF88002849
-:1032E0003C04080024844EB0AF8C00241520000656
-:1032F000A380002D240200201562000E3402FFFF7F
-:103300001582000C00000000240200201562000558
-:10331000000000008C6300142402FFFF106200070D
-:10332000000000000E00095A000000000A000C9D79
-:10333000000000000E0009C5006020210E000C36C0
-:10334000000000008FBF001024020C8027BD001871
-:1033500003E00008AF4200243C0208008C4200E079
-:1033600027BDFFA0AFB1003C008210212411FF80D7
-:10337000AFBE0058AFB70054AFB20040AFB0003896
-:10338000AFBF005CAFB60050AFB5004CAFB4004863
-:10339000AFB30044005110248F4800248F49002807
-:1033A0008F470028AF4200243C0208008C4200E016
-:1033B0000080902124060006008210213042007F08
-:1033C000034218213C02000A006280213C02001FD7
-:1033D0003442FF8000E2382427A40010260500F0C4
-:1033E0000122F0240102B8240E0005EEAFA7003040
-:1033F0008FA20018AE0200C48FA2001CAE0200C84B
-:103400008FA20024AE0200CC93A40010920300D13E
-:103410002402FF800082102400431025304900FF61
-:103420003083007F3122007F0062102A10400004A8
-:10343000000310C001311026304900FF000310C006
-:1034400000031940006218213C0208008C4200DC95
-:10345000920400D202421021004310210051102496
-:10346000AF42002893A300103063007F000310C018
-:1034700000031940006218213C0208008C4200DC65
-:1034800002421021004310213042007F03421821E4
-:103490003C02000C006240218FA300142402FFFFB5
-:1034A00010620030309500FF93A2001195030014C4
-:1034B000304400FF3063FFFF0064182B1060000DE4
-:1034C00000000000950400148D07001C8D060018F4
-:1034D0003084FFFF0044202300042100000010215D
-:1034E00000E4382100E4202B00C230210A000D172F
-:1034F00000C43021950400148D07001C8D060018AF
-:103500003084FFFF008220230004210000001021EE
-:103510000080182100C2302300E4202B00C4302397
-:1035200000E33823AD07001CAD06001893A200117C
-:10353000A502001497A20012A50200168FA2001483
-:10354000AD0200108FA20014AD02000C93A2001176
-:10355000A502002097A20012A50200228FA200144B
-:10356000AD0200242406FF80024610243256007F5C
-:10357000AF420024035618213C02000A0062802159
-:103580008E02004C8FA200203124007F000428C04E
-:10359000AE0200508FA200200004214000852821A7
-:1035A000AE02007093A2001001208821A2020083C5
-:1035B00093A20010A2020079920200853042003FDF
-:1035C000A20200853C0208008C4200DC024210216D
-:1035D0000045102100461024AF42002C3C02080098
-:1035E0008C4200E43C0308008C6300DC02421021A2
-:1035F0000044102100461024AF4200283C0208007D
-:103600008C4200E402431821006518210242102177
-:10361000004410213042007F3063007F93A50010EA
-:1036200003422021034318213C02000E0062402186
-:103630003C02000C10B1008C008248213233007F24
-:10364000166000192404FF803C0208008C4200DC54
-:103650000242102100441024AF42002C3C0208001A
-:103660008C4200E43C0308008C6300DC0242102121
-:1036700000441024AF4200283C0208008C4200E4C1
-:10368000024318213063007F024210213042007F44
-:1036900003422021034318213C02000E0062402116
-:1036A0003C02000C008248219124000D2414FF806C
-:1036B0000000102100942025A124000D9504000293
-:1036C000950500148D07001C3084FFFF30A5FFFF17
-:1036D0008D060018008520230004210000E4382115
-:1036E00000C2302100E4202B00C43021AD07001CB3
-:1036F000AD06001895020002A5020014A5000016F0
-:103700008D020008AD0200108D020008AD02000C11
-:1037100095020002A5020020A50000228D020008EB
-:10372000AD0200249122000D3042004010400042C2
-:10373000262200013C0208008C4200E0A3B30028CE
-:103740003C10000A0242102100541024AF42002411
-:103750003C0208008C4200E0A380002C27A4002C2F
-:10376000024210213042007F0342182100701821CC
-:103770008C6200D88D26000427A50028AFA9002C54
-:1037800000461021AC6200D80E000AADAF830028BD
-:1037900093A300288F8200280E0006F7A04300D1D3
-:1037A0000E000C360000000002541024AF4200242A
-:1037B0003C0208008C4200DC00132940001320C0AA
-:1037C00000A42021024210210044102100541024A2
-:1037D000AF42002C3C0208008C4200E43C0308008D
-:1037E0008C6300DC03563021024210210045102179
-:1037F00000541024AF4200283C0208008C4200E430
-:1038000002431821006418210242102100451021B2
-:103810003042007F3063007F0342202103431821A0
-:103820003C02000E006240213C02000C00D08021CE
-:1038300000824821262200013043007F14750005D4
-:10384000304400FF2403FF8002231024004310268D
-:10385000304400FF93A20010008088212508002832
-:103860001444FF762529002093A400108FA3001490
-:103870002402FFFF1062000A308900FF2482000149
-:10388000248300013042007F14550005306900FF99
-:103890002403FF800083102400431026304900FFDA
-:1038A00092020078305300FF11330032012088214A
-:1038B0003C0208008C4200DC3225007F000520C05D
-:1038C0000005294000A42021024210212406FF8087
-:1038D0000044102100461024AF42002C3C03080095
-:1038E0008C6300DC3C0208008C4200E40243182197
-:1038F00002421021004510210064182100461024C6
-:103900003063007FAF420028034318213C02000EC1
-:10391000006240213C0208008C4200E48D06000C4D
-:103920000100202102421021004510213042007F79
-:10393000034218213C02000C0062482110C0000D17
-:10394000012028210E00071B000000002402FF8038
-:103950000222182426240001006228263082007FDB
-:1039600014550002308300FF30A300FF1473FFD012
-:10397000006088218E0300743C027FFF3442FFFF09
-:1039800000621824AE0300740E00073C02402021A0
-:10399000AF5700248FA20030AF5E00288FBF005CBD
-:1039A0008FBE00588FB700548FB600508FB5004CB3
-:1039B0008FB400488FB300448FB200408FB1003CF9
-:1039C0008FB0003827BD006003E00008AF42002C34
-:1039D00027BDFFD8AFB1001CAFBF0020AFB00018AB
-:1039E00027510188922200032408FF803C03000A2B
-:1039F0003047007FA3A700108F4601803C020800DB
-:103A00008C4200E0AF86003400C2282100A81024B8
-:103A1000AF4200249224000030A2007F0342102114
-:103A200000431021AF8200283084007F240200026E
-:103A300014820025000719403C0208008C4200E473
-:103A400000C210210043282130A2007F0342182128
-:103A500000A81024AF4200283C02000C006218218C
-:103A60009062000DAFA3001400481025A062000D65
-:103A70008FA300149062000D304200405040006A55
-:103A80008FBF00208F860028A380002C27A400145D
-:103A90008CC200D88C63000427A5001000431021BD
-:103AA0000E000AADACC200D893A300108F8200288C
-:103AB0000E0006F7A04300D10E000C3600000000F7
-:103AC0000A000ED88FBF00200E00070000C0202182
-:103AD0000E00070E000000003C0200080342802197
-:103AE000922300019202007B1443004F8FBF0020FD
-:103AF000922200003044007F24020004108200174C
-:103B0000288200051040000624020005240200035C
-:103B1000108200078FB1001C0A000ED900000000BF
-:103B2000108200128FBF00200A000ED98FB1001C36
-:103B300092050083920600788E0700748F8400340B
-:103B400030A500FF00073E0230C600FF0E0007440C
-:103B500030E7007F0A000ED88FBF00200E000CA4B3
-:103B60008F8400340A000ED88FBF002024020C80FE
-:103B7000AF4200249202003E30420040104000203C
-:103B8000000000009202003E000216000002160330
-:103B900004410006000000008F8400340E0006710E
-:103BA000240500930A000ED88FBF00209202003F28
-:103BB00024030018304200FF1443000C8F840034AB
-:103BC000240500390E000609000030210E000335DF
-:103BD0008F84003424020012A202003F0E00033E34
-:103BE0008F8400340A000ED88FBF002024050036D1
-:103BF0000E000609000030210A000ED88FBF0020F9
-:103C00000E0003358F8400349202000534420020F8
-:103C1000A20200050E00033E8F8400340E00108FB8
-:103C20008F8400348FBF00208FB1001C8FB000182C
-:103C300024020C8027BD002803E00008AF420024C6
-:103C400027BDFFE8AFB00010AFBF0014274301004D
-:103C500094620008000214000002140304410002F0
-:103C6000000080212410000194620008304200808E
-:103C70001040001A02001021946200083042200017
-:103C800010400016020010218C6300183C021C2D0D
-:103C9000344219ED240600061062000F3C07602133
-:103CA0003C0208008C4200D4104000078F8200289C
-:103CB0008F830028906200623042000F344200403F
-:103CC000A06200628F8200288F840034944500D463
-:103CD0000E000BBF30A5FFFF020010218FBF0014A4
-:103CE0008FB0001003E0000827BD001827BDFFE0DB
-:103CF000AFB10014AFB00010A380002CAFBF00180C
-:103D00008F4501003C0308008C6300E02402FF8023
-:103D1000AF85003400A318213064007F03442021C4
-:103D2000006218243C02000A00822021AF430024D4
-:103D3000275001008E0200148C8300DCAF84002821
-:103D40000043102318400004000088218E02001454
-:103D50000E000B50AC8200DC9202000B2403000228
-:103D6000304200FF1443002F0000000096020008BC
-:103D7000304300FF24020082146200052402008404
-:103D80000E000A0B000000000A000F640000000093
-:103D900014620009240200818F8200288F8400347D
-:103DA0003C076021944500D49206000530A5FFFF32
-:103DB0000A000F5330C600FF146200270000000005
-:103DC0009202000A304300FF3062002010400004DD
-:103DD000306200408F8400340A000F4F24060040F8
-:103DE00010400004000316008F8400340A000F4FB7
-:103DF0002406004100021603044100178F8400349A
-:103E0000240600428F8200283C076019944500D4A4
-:103E100030A5FFFF0E000BBF000000000A000F647A
-:103E2000000000009202000B24030016304200FF45
-:103E300010430006000000009202000B240300174C
-:103E4000304200FF14430004000000000E000EDEAC
-:103E500000000000004088210E000C360000000029
-:103E60009202000A304200081040000624020C8032
-:103E70008F8500283C0400080E0012BD0344202159
-:103E800024020C80AF4200248FBF001802201021B2
-:103E90008FB000108FB1001403E0000827BD002090
-:103EA00027BDFFE8AFBF0014AFB000108F50002453
-:103EB0003C0308008C6300E08F4501002402FF8072
-:103EC00000A318213064007F0344202100621824DD
-:103ED0003C02000A00822021AF850034AF43002459
-:103EE00090820062AF8400283042000F34420050BC
-:103EF000A08200623C02001F3442FF800E0006F7E1
-:103F000002028024AF5000248FBF00148FB0001035
-:103F100003E0000827BD00183C0208008C42002086
-:103F20001040001D2745010090A300093C02000835
-:103F30000342202124020018546200033C020008BE
-:103F40000A000FA5240200080342202124020016C3
-:103F5000146200052402001724020012A082003F10
-:103F60000A000FAF94A700085462000694A7000847
-:103F7000936200052403FFFE00431024A3620005A2
-:103F800094A7000890A6001B8CA4000094A500062E
-:103F90000A000B9A00073C0003E000080000000044
-:103FA0002744010094820008304500FF38A30082B6
-:103FB00038A200842C6300012C4200010062182505
-:103FC00010600006240200839382002D1040000D33
-:103FD000000000000A000C690000000014A20005A7
-:103FE00024A2FF808F4301043C02602003E000080C
-:103FF000AC430014304200FF2C420002104000038A
-:10400000240200220A000F090000000014A200038D
-:10401000000000000A000F76000000000A000F9464
-:10402000000000009363007E9362007A144300094D
-:10403000000020219362000024030050304200FF62
-:1040400014430004240400019362007E2442000112
-:10405000A362007E03E00008008010218F4201F877
-:104060000440FFFE24020002AF4401C0A34201C489
-:104070003C02100003E00008AF4201F827BDFFE852
-:10408000AFBF00109362003F2403000A304200FFDC
-:1040900014430046000000008F6300548F62004C00
-:1040A0001062007F036030219362000024030050FF
-:1040B000304200FF1443002F000000008F440140F5
-:1040C0003C0208008C4200E02403FF8000821021A3
-:1040D00000431024AF4200243C0208008C4200E060
-:1040E0008F6500543C03000A008220213084007F49
-:1040F0000344102100431021AC4501089762003CA5
-:104100008F63004C3042FFFF000210400062182114
-:10411000AF63005C8F6300548F64004C9762003C77
-:10412000006418233042FFFF0003184300021040D0
-:104130000043102A10400006000000008F62005467
-:104140008F63004C004310230A0010250002104327
-:104150009762003C3042FFFF00021040ACC2006496
-:1041600024020001A0C0007CA0C2008424020C80B4
-:10417000AF4200240E000FD78F4401401040004989
-:104180008FBF00108F4301408F4201F80440FFFEB3
-:1041900024020002AF4301C0A34201C43C0210004C
-:1041A000AF4201F80A0010778FBF00109362003F02
-:1041B00024030010304200FF1443000400000000FC
-:1041C0008F4401400A001063000028219362003FE1
-:1041D00024030016304200FF14430004240200149C
-:1041E000A362003F0A001071000000008F62004CC3
-:1041F0008F630050004310230441002A8FBF00103A
-:104200009362008124420001A362008193620081D5
-:104210003C0308008C6300C0304200FF14430010D0
-:10422000000000009362003F24030004304200FFBE
-:1042300014430006000000008F4401408FBF0010AF
-:10424000240500930A00067127BD00188F44014021
-:10425000240500938FBF00100A0006E027BD001858
-:104260008F4401400E000335000000008F620054AF
-:104270002442FFFFAF6200548F6200502442FFFFD0
-:10428000AF6200500E00033E8F4401408F44014056
-:104290008FBF0010240500040A00034327BD001847
-:1042A0008FBF001003E0000827BD00188F4201886F
-:1042B0009363007E00021402304400FF306300FF6D
-:1042C0001464000D0000000093620080304200FF83
-:1042D0001044000900000000A36400809362000005
-:1042E00024030050304200FF14430004000000008B
-:1042F0000A0007A88F440180A364008003E000083F
-:104300000000000027BDFFE8AFB00010AFBF0014F1
-:1043100093620005240300303042003014430089CA
-:10432000008080213C0208008C4200201040008068
-:10433000020020210E000564000000008F8500208F
-:10434000ACB000009362003E9363003F304200FF38
-:1043500000021200306300FF00431025ACA20004ED
-:104360009362008200021600000216030441000559
-:10437000000000003C0308008C6300480A0010B5F0
-:10438000000000009362003E3042004014400003F1
-:104390000000182193620081304300FF9362008285
-:1043A00000031E00304200FF0002140000621825C6
-:1043B000ACA300088F620040ACA2000C8F620048E2
-:1043C000ACA200108F62004CACA200148F620050AF
-:1043D0008F63004C004310230441000300000000E1
-:1043E0000A0010C98F62004C8F620050ACA2001806
-:1043F0003C02080094424E963C03C00B0000202172
-:10440000004310250E000589ACA2001C8F620054E9
-:104410008F840020AC8200008F620058AC820004C0
-:104420008F62005CAC8200088F6200608F43007472
-:1044300000431021AC82000C8F620064AC8200103B
-:10444000976300689762006A00031C003042FFFF18
-:1044500000621825AC83001493620082240300805C
-:10446000304200FF14430003000000000A0010FD6A
-:10447000AC8000188F63000C240200011062000E53
-:104480002402FFFF9362003E304200401440000AC5
-:104490002402FFFF8F63000C8F4200740062182318
-:1044A0003C02080000621024144000020000282191
-:1044B0000060282100051043AC8200183C0208006F
-:1044C00094424E963C03C00C00002021004310256E
-:1044D0008F8300200E000589AC62001C8F620018DB
-:1044E0008F8300203C05080094A54E96240400010B
-:1044F000AC620000AC6000048F66006C3C02400DB2
-:1045000000A22825AC6600088F6200DCAC62000CBB
-:10451000AC6000109362000500021600AC6200144B
-:10452000AC6000180E000589AC65001C020020215B
-:104530008FBF00148FB00010A36000050A0004F2C2
-:1045400027BD00188FBF00148FB0001003E00008D3
-:1045500027BD00189742007C30C600FFA08600846B
-:104560003047FFFF2402000514C2000B24E346502D
-:1045700090A201122C4200071040000724E30A0019
-:1045800090A30112240200140062100400E2102122
-:104590000A0011353047FFFF3067FFFF03E00008D6
-:1045A000A4870014AC87004C8CA201080080402135
-:1045B00000A0482100E2102330C600FF184000038D
-:1045C00093AA001324E2FFFCACA2010830C2000150
-:1045D00010400008000000008D02005000E210238F
-:1045E00004410013240600058D02005410E200105F
-:1045F000000000008D02005414E2001A00000000C8
-:104600003C0208008C4200D8304200201040000AD2
-:1046100024020001910300789102008314430006F4
-:104620002402000101002021012028212406000489
-:104630000A00112300000000A100008411400009BD
-:10464000A50200148F4301008F4201F80440FFFED1
-:1046500024020002AF4301C0A34201C43C02100087
-:10466000AF4201F803E000080000000027BDFFE8AA
-:104670008FA90028AFBF00100080402100E9182357
-:104680001860007330C600FFA080007CA08000810D
-:104690008CA2010800E210230440004D000000003D
-:1046A0008C8200509483003C8C8400640047482333
-:1046B0003063FFFF012318210083202B10800004AA
-:1046C000000000008D0200640A00118600E2102143
-:1046D0009502003C3042FFFF0122102100E2102130
-:1046E000AD02005C9502003C8D03005C3042FFFF90
-:1046F0000002104000E210210043102B1040000384
-:10470000000000000A0011958D02005C9502003C3B
-:104710003042FFFF0002104000E21021AD02005CB9
-:10472000A1000084AD07004C8CA2010800E2102318
-:104730001840000224E2FFFCACA2010830C20001D4
-:104740001040000A000000008D02005000E210231B
-:1047500004410004010020218D02005414E20003F2
-:10476000000000000A0011B7240600058D02005465
-:1047700014E200478FBF00103C0208008C4200D8B2
-:10478000304200201040000A24020001910300780A
-:10479000910200831443000624020001010020213D
-:1047A000240600048FBF00100A00112327BD001843
-:1047B000A1000084A50200148F4301008F4201F87C
-:1047C0000440FFFE240200020A0011DC0000000089
-:1047D0008C82005C004910230043102B54400001E0
-:1047E000AC87005C9502003C3042FFFF0062102B5A
-:1047F00014400007240200029502003C8D03005C77
-:104800003042FFFF00621821AD03005C2402000269
-:10481000AD07004CA10200840E000FD78F440100A9
-:104820001040001B8FBF00108F4301008F4201F822
-:104830000440FFFE24020002AF4301C0A34201C4B2
-:104840003C021000AF4201F80A0011F28FBF0010C5
-:1048500030C200101040000E8FBF00108C83005C2F
-:104860009482003C006918233042FFFF0062182147
-:104870003C023FFF3444FFFF0083102B54400001F3
-:104880000080182101231021AD02005C8FBF0010B1
-:1048900003E0000827BD001827BDFFE88FAA002805
-:1048A000AFBF00100080402100EA482319200021FA
-:1048B00030C600FF8C83005C8C820064006A182381
-:1048C0000043102B504000100069182194A20110E1
-:1048D00001221021A4A2011094A201103042FFFF76
-:1048E0000043102B1440000A3C023FFF94A2011029
-:1048F00000431023A4A201109482003C3042FFFF29
-:104900000A00121100621821A4A001103C023FFF0E
-:104910003444FFFF0083102B544000010080182115
-:1049200000671021AD02005CA100007C0A00125952
-:10493000A100008130C200101040003C00000000C7
-:104940008C820050004A10231840003800000000FC
-:104950009082007C24420001A082007C9082007C36
-:104960003C0308008C630024304200FF0043102BFE
-:104970001440005C8FBF00108CA2010800E21023DD
-:1049800018400058000000008C8300549482003CC2
-:10499000006A18233042FFFF000318430002104052
-:1049A0000043102A10400005000000008C820054D3
-:1049B000004A10230A001240000210439482003C77
-:1049C0003042FFFF00021040AD0200649502003C3F
-:1049D0008D0400649503003C3042FFFF000210404C
-:1049E000008220213063FFFF008318210143102142
-:1049F000AD02005C8D020054ACA20108240200024A
-:104A0000A10200840E000FD78F4401001040003532
-:104A10008FBF00108F4301008F4201F80440FFFE5A
-:104A2000240200020A00128200000000AD07004CC0
-:104A30008CA2010800E210231840000224E2FFFCCF
-:104A4000ACA2010830C200011040000A00000000C2
-:104A50008D02005000E210230441000401002021D7
-:104A60008D02005414E20003000000000A001279D5
-:104A7000240600058D02005414E2001A8FBF0010B6
-:104A80003C0208008C4200D8304200201040000A4E
-:104A90002402000191030078910200831443000670
-:104AA0002402000101002021240600048FBF001011
-:104AB0000A00112327BD0018A1000084A5020014DC
-:104AC0008F4301008F4201F80440FFFE24020002E0
-:104AD000AF4301C0A34201C43C021000AF4201F841
-:104AE0008FBF001003E0000827BD00188FAA001038
-:104AF0008C8200500080402130C600FF004A102305
-:104B000000A048211840000700E0182124020001FD
-:104B1000A0800084A0A00112A48200140A0011F455
-:104B2000AFAA0010A0800081AD07004C8CA2010844
-:104B300000E210231840000224E2FFFCACA20108AE
-:104B400030C2000110400008000000008D0200503B
-:104B50000062102304410013240600058D02005456
-:104B600010620010000000008D0200541462001159
-:104B7000000000003C0208008C4200D830420020B7
-:104B80001040000A24020001910300789102008382
-:104B900014430006240200010100202101202821E5
-:104BA000240600040A00112300000000A100008474
-:104BB000A502001403E000080000000027BDFFE08C
-:104BC000AFBF0018274201009046000A8C4800142D
-:104BD0008C8B004C9082008430C900FF0168182340
-:104BE000304A00FF1C60001A2D4600062402000116
-:104BF0000142100410C00016304300030120302190
-:104C00000100382114600007304C000C15800009A9
-:104C1000304200301440000B8FBF00180A0012E32E
-:104C2000000000000E0011F4AFAB00100A0012E308
-:104C30008FBF00180E001169AFAB00100A0012E31D
-:104C40008FBF0018AFAB00100E001289AFAA00147E
-:104C50008FBF001803E0000827BD002024020003D6
-:104C6000A08200848C82005403E00008ACA20108FA
-:104C70003C02000803421821906200812406004390
-:104C80003C07601924420001A0620081906300810A
-:104C90003C0208008C4200C0306300FF1462001028
-:104CA0002403FF803C0208008C4200E000821021B7
-:104CB00000431024AF4200243C0208008C4200E074
-:104CC0003C03000A008210213042007F0342102181
-:104CD00000431021944500D40A000BBF30A5FFFF0C
-:104CE00003E000080000000027BDFFE0AFBF001890
-:104CF000AFB10014AFB000108F420180008080215E
-:104D000000A088210E0012EA00402021A2000084A9
-:104D10008E0200548FBF00188FB00010AE22010821
-:104D20008FB1001403E0000827BD002027BDFFE07D
-:104D30003C020008AFB00010AFBF0018AFB10014C4
-:104D4000034280218F510140920300848E04005061
-:104D50008E02004C14820040306600FF3C020800C6
-:104D60008C4200E02403FF80022210210043102423
-:104D7000AF4200243C0208008C4200E09744007CD3
-:104D800092050081022210213042007F0342182147
-:104D90003C02000A0062182114A0000B3084FFFFBF
-:104DA0002402000554C20014248205DC9062011222
-:104DB00024420001A062011224020C80AF420024B0
-:104DC0000A00134224020005A0600112240200051B
-:104DD00014C20009248205DC920200812C420007E3
-:104DE0005040000524820A0092030081240200142E
-:104DF00000621004008210213044FFFFA60400145A
-:104E00000E0012EA022020219602003C8E03004C84
-:104E1000022020213042FFFF0002104000621821D2
-:104E20000E000335AE03005C9202007D02202021BB
-:104E3000344200400E00033EA202007D8F4201F882
-:104E40000440FFFE24020002AF5101C0A34201C48E
-:104E50003C021000AF4201F88FBF00188FB1001460
-:0C4E60008FB0001003E0000827BD002008
-:044E6C0008000E7CB0
-:104E700008000EC408000F0408000F5008000F843B
-:104E80000A00002000000000000000000000000DEB
-:104E90006370342E362E31360000000004061004F4
-:104EA0000000000000000000000000000000000002
-:104EB00000000000000000000000000000000000F2
-:104EC00000000000000000000000002000000000C2
-:104ED00000000000000000000000000000000000D2
-:104EE00000000000000000000000000000000000C2
-:104EF0000000000000000000000000010000002B86
-:104F00000000000010000003000000000000000D81
-:104F10000000000D3C020800244258A43C03080095
-:104F200024635F70AC4000000043202B1480FFFD21
-:104F3000244200043C1D080037BD7FFC03A0F02183
-:104F40003C100800261000803C1C0800279C58A438
-:104F50000E00019C000000000000000D27BDFFE8CE
-:104F60003C096018AFBF00108D2C5000240DFF7F4E
-:104F700024080031018D5824356A380C24070C00B0
-:104F80003C1A8000AD2A50003C04800AAF4800085B
-:104F90003C1B8008AF4700240E000924AF8400109A
-:104FA0000E0008E7000000000E00083400000000BA
-:104FB0000E00125E000000003C0460168C850000AC
-:104FC0003C06FFFF3C02535300A618241062003F2A
-:104FD00034867C0094C201F2A780002C10400003AC
-:104FE000A78000CC38581E1EA798002C94C201F848
-:104FF00010400004978300CC38591E1EA79900CC9E
-:10500000978300CC2C7F006753E0000124030066E7
-:105010009784002C2C820401144000020060282197
-:10502000240404003C0760008CE904382403103C8D
-:105030003128FFFF1103001730B9FFFF5720000C84
-:10504000A38000CE24020050A38200CE939F00CE06
-:1050500013E0000A8FBF001027BD0018A78000CC06
-:10506000A780002CA780003403E00008A78000E69A
-:10507000939F00CE17E0FFF88FBF001027BD0018E8
-:10508000A78500CCA784002CA780003403E000088B
-:10509000A78000E6A38000CE8CCB003C316A0001E3
-:1050A0001140000E0000000030A7FFFF10E0FFE6F7
-:1050B000240200508CCC00C83186000114C0FFE4EB
-:1050C000939F00CE0A000072240200518C8F0004CE
-:1050D0003C0E60000A00005501EE30218CEF0808FC
-:1050E000240D5708000F740211CD000430B8FFFFE3
-:1050F000240500660A000073240404001700FFD48E
-:10510000939F00CE0A000072240200508F86001088
-:105110003089FFFF000939408CC300103C08005063
-:1051200000E82025AF4300388CC500142742040056
-:10513000AF82001CAF45003CAF44003000000000CF
-:10514000000000000000000000000000000000005F
-:105150000000000000000000000000008F4B000075
-:10516000316A00201140FFFD0000000003E000084C
-:10517000000000008F840010948A001A8C8700249D
-:105180003149FFFF000940C000E83021AF46003C34
-:105190008C8500248F43003C00A310231840002975
-:1051A000000000008C8B0020256200013C0D0050A7
-:1051B00035AC0008AF420038AF4C003000000000B2
-:1051C00000000000000000000000000000000000DF
-:1051D0000000000000000000000000008F4F0000F1
-:1051E00031EE002011C0FFFD000000008F4A0400D6
-:1051F0003C080020AC8A00108F490404AC890014DC
-:10520000AF48003000000000948600189487001C0E
-:1052100000C71821A48300189485001A24A2000155
-:10522000A482001A9498001A9499001E133800035F
-:105230000000000003E000080000000003E0000898
-:10524000A480001A8C8200200A0000CC3C0D005083
-:105250000A0000BD000000003C0308008C63002031
-:105260008F82001827BDFFE810620008AFBF001052
-:105270000E0000F4AF8300183C0308008C6300208C
-:1052800024040001106400048F8900108FBF0010F7
-:1052900003E0000827BD00188FBF00103C07601214
-:1052A000A520000A9528000A34E5001027BD001843
-:1052B0003106FFFF03E00008ACA600903C020800A6
-:1052C0008C42002027BDFFC8AFBF0034AFBE003006
-:1052D000AFB7002CAFB60028AFB50024AFB40020A4
-:1052E000AFB3001CAFB20018AFB1001410400050B3
-:1052F000AFB000108F840010948600069483000ADB
-:1053000000C3282330B6FFFF12C0004A8FBF00340D
-:1053100094890018948A000A012A40233102FFFF71
-:1053200002C2382B14E0000202C0202100402021DC
-:105330002C8C0005158000020080A021241400049C
-:105340000E0000A3028020218F8700100280982188
-:10535000AF80001494ED000A028088211280004E74
-:1053600031B2FFFF3C1770003C1540003C1E60004E
-:105370008F8F001C8DEE000001D71824507500504F
-:105380000220202102A3802B160000353C182000AB
-:105390005078004702202021241000018F83001440
-:1053A00014600039029158230230F8230250C821BA
-:1053B00033F1FFFF1620FFEE3332FFFF8F8700101F
-:1053C0003C110020AF5100300000000094E6000ABC
-:1053D0003C1E601237D5001002662821A4E5000AA1
-:1053E00094E2000A94F2000A94F400183057FFFF88
-:1053F0001292003BAEB700908CED00148CE40010CC
-:105400000013714001AE4021000E5FC3010E502B0E
-:10541000008B4821012A1821ACE80014ACE30010ED
-:1054200002D3382330F6FFFF16C0FFB98F84001077
-:105430008FBF00348FBE00308FB7002C8FB600288E
-:105440008FB500248FB400208FB3001C8FB20018DA
-:105450008FB100148FB0001003E0000827BD0038A2
-:10546000107E001B000000001477FFCC2410000108
-:105470000E0015A9000000008F8300141060FFCB00
-:105480000230F823029158238F87001001702021E9
-:105490000A0001873093FFFF8F8300141460FFCB55
-:1054A0003C110020AF5100300A0001530000000001
-:1054B0000E00079B024028210A000147004080217E
-:1054C0000E000341024028210A00014700408021CC
-:1054D0000E001471022020210A00014700408021A3
-:1054E0000E0000BD000000000A00016902D338234D
-:1054F00027BDFFE8AFB00010AFBF00140E000037AB
-:10550000000000003C028000345000700A0001AA34
-:105510008E0600008F4F000039EE000131C20001FD
-:10552000104000248F8600A88E0700003C0C080065
-:105530008D8C003C3C0908008D29003800E668236A
-:10554000018D28210000502100AD302B012A40217F
-:10555000010620213C010800AC25003CAF8700A8D3
-:105560003C010800AC2400380E0000F600000000EA
-:105570003C0308008C6300701060FFE6006020218F
-:105580003C0508008CA500683C0608008CC6006C31
-:105590000E001538000000003C010800AC2000702F
-:1055A0008F4F000039EE000131C200011440FFDED0
-:1055B0008F8600A88E0A00008F8B00A83C0508008B
-:1055C0008CA5003C3C0408008C840038014B482327
-:1055D00000A938210082182100E9402B0068102121
-:1055E0003C010800AC27003C3C010800AC2200381C
-:1055F0008F5F01002419FF0024180C0003F92024F8
-:1056000010980012AF840000AF440020936D00009A
-:10561000240C002031A600FF10CC0012240E0050F4
-:1056200010CE00043C194000AF5901380A0001A314
-:10563000000000000E0011D4000000003C194000E2
-:10564000AF5901380A0001A3000000000E00010F4D
-:10565000000000003C194000AF5901380A0001A3C6
-:10566000000000008F58010000802821330F00FF48
-:1056700001E020210E0002EEAF8F00043C19400033
-:10568000AF5901380A0001A30000000000A4102B4C
-:1056900024030001104000090000302100052840CB
-:1056A00000A4102B04A00003000318405440FFFC8A
-:1056B000000528405060000A0004182B0085382B94
-:1056C00054E000040003184200C330250085202365
-:1056D000000318421460FFF9000528420004182B4B
-:1056E00003E0000800C310213084FFFF30A5FFFF56
-:1056F0008F4201B80440FFFE3C0740800087302500
-:105700003C031000AF400180AF450184AF460188E3
-:1057100003E00008AF4301B83084FFFF8F4201B8B7
-:105720000440FFFE3C0740388CA600000087282577
-:105730003C031000AF460180AF45018803E000083C
-:10574000AF4301B88F8300388F8600301066000B9E
-:10575000008040213C07080024E75A18000328C0B5
-:1057600000A710218C44000024630001108800056C
-:105770003063000F5466FFFA000328C003E00008FE
-:10578000000010213C07080024E75A1C00A7302124
-:1057900003E000088CC200003C039000346200016A
-:1057A00000822025AF4400208F45002004A0FFFE8A
-:1057B0000000000003E00008000000003C0380003F
-:1057C000346200010082202503E00008AF4400207D
-:1057D00027BDFFE0AFB100143091FFFFAFB0001064
-:1057E000AFBF00181220001500A080218CA500007A
-:1057F00010A00013240400020E000C6B24060140CC
-:10580000AE0000008F4201B80440000D00002821C6
-:105810003C064000022620258FBF00188FB10014DF
-:105820008FB000103C03100027BD0020AF45018061
-:10583000AF44018803E00008AF4301B88CA5000025
-:105840008F4201B80440FFFE3C064000022620259E
-:105850008FBF00188FB100148FB000103C031000F0
-:1058600027BD0020AF450180AF44018803E0000858
-:10587000AF4301B83086FFFF8F4201B80440FFFEFE
-:105880003C0940068CA8000000C93825AF480180BB
-:105890008CA400043C031000AF440184AF4701888E
-:1058A00003E00008AF4301B827BDFFE0AFB0001030
-:1058B000AFBF0018AFB100149363003E0080802199
-:1058C0000080282130620040000020211040000F9D
-:1058D0008E1100000E000860022020219367000056
-:1058E0002404005030E500FF50A400128E0F000089
-:1058F000022020218FBF00188FB100148FB000103C
-:10590000A762013C0A00092027BD00200E00027D8D
-:10591000000000000E0008600220202193670000B4
-:105920002404005030E500FF14A4FFF202202021DF
-:105930008E0F00003C1008008E1000503C0D000C33
-:10594000240BFF8001F05021314E007F01DA6021ED
-:10595000018D4021014B4824AF490028022020211D
-:105960008FBF00188FB100148FB00010A50200D6B1
-:1059700027BD00200A000920AF8800D027BDFFE026
-:10598000AFBF0018AFB10014AFB0001093660001B4
-:10599000008080210E00024630D10004936400058F
-:1059A000001029C2A765000034830040A3630005EE
-:1059B0000E00024F020020210E00092202002021C9
-:1059C00024020001AF62000C02002821A76200102F
-:1059D00024040002A762001224060140A7620014FA
-:1059E0000E000C6BA76200161620000F8FBF001868
-:1059F000978C00343C0B08008D6B00782588FFFFE6
-:105A00003109FFFF256A0001012A382B10E000064A
-:105A1000A78800343C0F6006240E001635ED0010F8
-:105A2000ADAE00508FBF00188FB100148FB00010C2
-:105A300003E0000827BD002027BDFFE0AFB1001440
-:105A4000AFBF0018AFB0001000A088211080000A7E
-:105A50003C0360002402008010820012000000005D
-:105A60000000000D8FBF00188FB100148FB0001020
-:105A700003E0000827BD00208C682BF80500FFFE1E
-:105A800000000000AC712BC08FBF00188FB1001454
-:105A90008FB000103C09100027BD002003E0000873
-:105AA000AC692BF80E00024600A02021936500058A
-:105AB000022020210E00024F30B000FF2403003EE0
-:105AC0001603FFE7000000008F4401780480FFFE0A
-:105AD000240700073C061000AF510140022020219E
-:105AE000A34701448FBF00188FB100148FB000107E
-:105AF000AF4601780A0002BF27BD002027BDFFE89E
-:105B0000AFBF0014AFB000108F50002000000000A5
-:105B10000E000922AF440020AF5000208FBF0014B8
-:105B20008FB0001003E0000827BD00183084FFFF8D
-:105B30008F4201B80440FFFE3C0740350087302506
-:105B40003C031000AF450180AF400184AF4601889F
-:105B500003E00008AF4301B83084FFFF8F4201B873
-:105B60000440FFFE3C074036008730253C03100010
-:105B7000AF450180AF400184AF46018803E00008D3
-:105B8000AF4301B827BDFFD0AFB3001C3093FFFF78
-:105B9000AFB50024AFB20018AFBF0028AFB40020EB
-:105BA000AFB10014AFB0001030B5FFFF1260002796
-:105BB000000090218F90001C8E0300003C068000A6
-:105BC0002402004000033E0200032C0230E4007F68
-:105BD000006688241482001D30A500FF8F830028F2
-:105BE0002C68000A510000108F91001400035880A7
-:105BF0003C0C0800258C56CC016C50218D490000CE
-:105C0000012000080000000002B218213065FFFFEB
-:105C10000E00021A24040084162000028F90001C3B
-:105C2000AF8000288F910014260C0020264B000125
-:105C3000018080213172FFFF16200004AF8C001C10
-:105C40000253402B1500FFDC000000000240102131
-:105C50008FBF00288FB500248FB400208FB3001CA5
-:105C60008FB200188FB100148FB0001003E000084D
-:105C700027BD0030240D003414AD00F600000000F4
-:105C8000920B000E240A16803C07000CA36B002127
-:105C90009203000D0347F8213C066000A363002037
-:105CA000961100123C087FFF350CFFFFA771003CE6
-:105CB00096020010240B00053054FFFFAF740084DF
-:105CC0008E19001CAF4A00288FF800008CCF444882
-:105CD0000319702601EE3021AF66004C8F69004C2D
-:105CE00024CD00013C197F00AF6900508F64005043
-:105CF000AF640054AF660070AF6D00588F650058F8
-:105D000024040050AF65005CA3600023AF6C006406
-:105D1000A36B00378E030014AF6300488F710048F7
-:105D2000AF7100248E020018AF62006C9214000C58
-:105D3000A3740036936A003E355F0020A37F003EC7
-:105D40008F7800740319782435EE4000AF6E00742C
-:105D500093700000320900FF112402332418FF80E1
-:105D60003C04080024845A980E00028A00000000B7
-:105D700024060004240700013C0408008C845A987F
-:105D8000A366007DA36700058F4A01780540FFFEEA
-:105D900024020002AF440140A34201448F90001C42
-:105DA0003C141000AF5401780A000369AF8000284A
-:105DB0002CAD003751A0FF9C8F9100140005A080EE
-:105DC0003C180800271856F4029878218DEE000040
-:105DD00001C00008000000002406000614A60011FF
-:105DE000000000003C1F08008FFF5A9824040005A3
-:105DF000AF5F00208E190018AF7900188F78004C23
-:105E0000AF78001C8F6F0050122000C2AF6F00707F
-:105E10000A000369AF840028240A000710AA00843E
-:105E2000240300063C05080024A55A980E000254DD
-:105E3000240400818F90001C0011102B0A000369BC
-:105E4000AF820028240A000414AAFFF6240300509D
-:105E50003C0E08008DCE5A98AF4E00208E090008E7
-:105E6000AF6900408E060008AF6600448E07000C44
-:105E7000AF6700488E040010AF64004C8E0D001018
-:105E8000AF6D00848E080014AF6800508E050018B6
-:105E9000AF6500548E0C001CAF6C0058936B000073
-:105EA000317400FF128301F5000000008F64004888
-:105EB0008F6600400086382304E000042404008C30
-:105EC0001620FFDE24020003240400823C050800A3
-:105ED00024A55A980E00027D000000008F90001C3F
-:105EE000000010210A000369AF8200282409000580
-:105EF00014A9FFCC240520003C0A08008D4A5A98BA
-:105F0000AF4A00208E1F0004AF7F005C921900088A
-:105F100024100008A37900218F98001C930F00091A
-:105F2000A36F00208F86001C90CE000A31C400FFB2
-:105F300010900010288300091460006C24020002F5
-:105F4000240800201088000B3405800028850021DB
-:105F500014A0000824054000240D0040108D000509
-:105F60003C05000124070080108700023C05000268
-:105F7000240540008F6E00743C0FFF0001CF802489
-:105F800002054825AF69007490C4000BA36400812A
-:105F90008F84001C9486000C10C0019B0000000040
-:105FA000948E000C241FFFBF24060004A76E003C43
-:105FB0009090000EA370003E8F89001C9124000F6A
-:105FC000A364003F8F94001C8E8D00108F470074D7
-:105FD00001A72823AF6500608E880014AF680064B5
-:105FE000968C0018A76C0068968B001AA76B006A45
-:105FF0008E82001CAF62006C96830002A763013E94
-:10600000928A000EA36A003E9379003E033FC024AB
-:106010001220016AA378003E8F90001C0A000369D9
-:10602000AF8600282414002214B4FF7E2403000746
-:106030003C0208008C425A981220000CAF4200200B
-:106040000A000369AF830028240C003310AC00144D
-:10605000240800283C05080024A55A980E000226B2
-:10606000240400810A0003EE8F90001C3C04080009
-:1060700024845A980E00028A00000000936B0000EE
-:1060800024110050316300FF107101540000000022
-:106090008F90001C000018210A000369AF830028BC
-:1060A0003C0508008CA55A9824040081AF450020C7
-:1060B000A36800343C05080024A55A980E00022667
-:1060C000000000008F90001C240200090A000369F0
-:1060D000AF82002802B288213225FFFF0E00021A8B
-:1060E000240400840A0003698F90001C1082FFA121
-:1060F000240504002894000312800176240C000477
-:10610000240B0001548BFF9B240540000A00043D32
-:10611000240501003C04080024845A988F62004C36
-:106120000E00028A8F6300508F90001C0000202117
-:106130000A000369AF8400288E1000042404008A3A
-:10614000AF500020936E000531C900021520016593
-:10615000020028219378002302002821330F002019
-:1061600015E001602404008D9362003F24190012A1
-:10617000305F00FF13F9015B240400810E0002462A
-:106180000200202193740023240A0004020020212D
-:1061900036830042A36300230E00024FA36A007DF2
-:1061A0008F4B01780560FFFE24050002AF500140CF
-:1061B000A34501448F90001C3C0C1000AF4C0178AB
-:1061C0000A0003EF0011102B8E1000042404008A33
-:1061D000AF500020936D000531A800021500001992
-:1061E000020028219367003F2414001230E400FFCE
-:1061F0001094010100000000936E003F240600048B
-:1062000031C900FF112600FC000000000E0002460C
-:1062100002002021936200232419FFFE02002021A6
-:10622000345F0020A37F0023A374003F9378000510
-:10623000031978240E00024FA36F000502002821E5
-:10624000000020210E000336000000000A0003EECB
-:106250008F90001C8E0500043C0F0008034F402166
-:10626000AF450020910E00002406005031C900FF08
-:106270001126017A240400888F5901B80720FFFEF7
-:106280003C0C400E008C58253C031000AF450180AB
-:10629000AF400184AF4B0188AF4301B891020000C9
-:1062A000240AFF8024040004004AF825A11F0000EE
-:1062B0000E000C6B240600300A0003EE8F90001CC9
-:1062C0008E04001C0E000231000000001040014C42
-:1062D000004048218F90001C240500898F4D01B893
-:1062E00005A0FFFE00000000AF4901808E0F001CDA
-:1062F0003C1440010011702B00B448253C111000E3
-:10630000AF4F0184AF8E0028AF490188AF5101B86B
-:106310000A00036A8F910014961900023C140800C9
-:1063200026945A9833380004130000F23C026000AF
-:106330008E1F001C3C010800AC3F5A98AF5F002044
-:10634000920C0010240B0014318400FF148B011CEC
-:106350000000000096090002312D000115A001B2D5
-:10636000000000008E020004AE8200083C0E08000F
-:106370008DCE5AA011C001A8000000008F690074E2
-:106380003C0E800024040001012E6825AF6D0074CE
-:10639000A3600005AF64000C3C0C08008D8C5AA073
-:1063A0008F88001CA7640010000C59C2A76400125B
-:1063B000A7640014A7640016A76B00088D030008EB
-:1063C00024040002AF63002C8D0A000CAF6A003079
-:1063D00091070010A36700348F82001C90450011C4
-:1063E000A36500358F86001C90D00012A370003684
-:1063F0008F9F001C93F90013A37900378F90001C26
-:1064000096180014A778003896140016A774003A5E
-:106410008E0F0018AF6F00245620FE02AF840028B4
-:106420003C05080024A55A980E00025400002021C3
-:106430008F90001C0A0004AC000020218E0F000485
-:106440003C14080026945A983C010800AC2F5A9836
-:10645000AF4F0020920E000331C90004112000024A
-:106460002402001224020006A362003F9203001BD4
-:10647000240AFFC03062003F004AF825A37F003E97
-:106480009219000333380001170000C1000000001A
-:106490008E020008AE8200083C0208008C425AA01E
-:1064A000104000C000000000000221C2A7640008E4
-:1064B0008E0D000C240B000124140014AF6D002C71
-:1064C0008E080010AF68003096050016A7650038EA
-:1064D000960C0014A76C003AAF6B000CA76B001071
-:1064E000A76B0012A76B0014A76B0016122000EB1D
-:1064F000A37400349206000330C700022CF00001A0
-:10650000260200088F90001C0A000369AF82002851
-:106510008E14000424030081AF54002093680023EC
-:106520003105001010A000AC000000008F4401B83D
-:106530000480FFFE3C06401F0011382B006610252A
-:106540003C111000AF540180AF870028AF40018498
-:10655000AF420188AF5101B80A00036A8F9100145D
-:106560008E0600043C19000803592021AF46002084
-:106570008E07000890980000240F0050331400FF8D
-:10658000128F00A7240500888F4401B80480FFFE05
-:106590003C0D40090011602B00AD10253C1110008E
-:1065A000AF460180AF8C0028AF470184AF4201881D
-:1065B000AF5101B80A00036A8F9100143C0508002E
-:1065C00024A55A980E00027D240400828F90001C9E
-:1065D000000030210A000369AF8600283C0408004F
-:1065E0008C845A980E0014F6000000008F90001C56
-:1065F0000A000486000018210E00033624040081DE
-:106600000A0003EE8F90001C3C05080024A55A9850
-:106610000E00027D2404008B8F90001C0011302B93
-:106620000A000369AF8600283C1908008F395A9880
-:106630003C1F08008FFF005024CCFFFE033F782151
-:1066400001F87024AF4E00283C0408008C845A984E
-:106650003C0908008D2900500089682131A5007F80
-:1066600000BA402101078021AE0600D8AF9000D0CB
-:10667000AE0000DC0A0003B8AE0C0108AF60008475
-:106680003C0808008D085A983C0D08008DAD00505C
-:106690002405FF803C02000C010D58210165602497
-:1066A000AF4C00288E0A00143174007F029A182122
-:1066B00000627821ADEA00D88E1F0014AF8F00D0A1
-:1066C000ADFF00DC8E1900102738FFFE0A00040B16
-:1066D000ADF80108548CFE27240540000A00043D53
-:1066E000240510000E00032B000000000A0003EE3A
-:1066F0008F90001C8C46442C3C056C6234B0797041
-:106700003C010800AC205A9814D000082404000270
-:1067100097880034978A002C02802821010A382BA0
-:1067200010E0001124040092240400020E000C89E1
-:10673000240501403C010800AC225A98AF420020D9
-:106740003C0308008C635A98106000052404008301
-:106750000E000854000000001040000924040083CB
-:106760003C05080024A55A980E00025400000000C1
-:106770008F90001C0011202B0A000369AF840028B1
-:106780000E000858000000000A0005308F90001C21
-:106790008E0400080E000231000000000A00058689
-:1067A000AE8200083C05080024A55A980E00022677
-:1067B000240400878F90001C0A0005A20011102BF2
-:1067C0000E00085C000000003C05080024A55A9853
-:1067D0000A00063A2404008B0E00024602802021A3
-:1067E0009370002302802021360D00100E00024F0E
-:1067F000A36D00238F90001C0A0005AB0000182138
-:10680000240400040E000C89240500301440002AE2
-:10681000004048218F90001C0A00051724050083C2
-:106820009205000C30BF000113E0000300000000DF
-:106830009602000EA482002C920A000C314800023D
-:106840001100FF5100002821960B00128E03001446
-:10685000A48B001A0A0005C2AC83001C8F83003889
-:106860008F8700301067FE84000020213C0908005B
-:1068700025295A1C000320C0008930218CD4000037
-:106880001285005E247800013303000F5467FFFA7D
-:10689000000320C00A0004FE000020213C0508007F
-:1068A00024A55A980E00027D240400828F90001CBB
-:1068B0000A0005A2000010213C0B0008034B202118
-:1068C00024030050240A0001AF420020A0830000EE
-:1068D000A08A00018F88001C91070004A08700187F
-:1068E0008F82001C90450005A08500198F86001C32
-:1068F00090DF0006A09F001A8F99001C93380007B4
-:10690000A098001B8F94001C928F0008A08F001C81
-:106910008F90001C920E0009A08E001D8F8D001C10
-:1069200091AC000AA08C001E8F8B001C3C0C080050
-:10693000258C5A1C9163000B3C0B0800256B5A18E0
-:10694000A083001F8F8A001C9148000CA0880020A3
-:106950008F87001C90E5000DA08500218F82001C10
-:10696000240546469046000EA08600228F9F001CFC
-:1069700093F9000FA09900238F98001C9314001026
-:10698000A09400248F8F001C91F00011A09000258E
-:106990008F90001C8F8E00308F990038960D001458
-:1069A000000E18C025C80001A48D0028960A001604
-:1069B000006C3021006BF821A48A002A9607001889
-:1069C0003108000FA487002CA485002E8E02001C25
-:1069D000ACC90000AF88003011190003AFE200001D
-:1069E0000A00051700002821250C00013184000F42
-:1069F000000028210A000517AF8400383C07080072
-:106A000024E75A180087802100002021ACC0000034
-:106A10000A0004FEAE0000003C05080024A55A98B8
-:106A20000A00063A240400878E0400040E00023196
-:106A3000000000000A00053BAE8200083084FFFF22
-:106A400030C600FF8F4201B80440FFFE000644003C
-:106A5000010430253C07200000C720253C0310001E
-:106A6000AF400180AF450184AF44018803E00008D6
-:106A7000AF4301B827BDFFE8AFB00010AFBF0014AF
-:106A80003C076000240600021080000600A0802160
-:106A90000010102B8FBF00148FB0001003E000080F
-:106AA00027BD00183C09600EAD2000348CE5201C89
-:106AB0008F82001C2408FFFC00A81824ACE3201CD3
-:106AC0000E0006EF8C45000C0010102B8FBF001439
-:106AD0008FB0001003E0000827BD00183C02600ED4
-:106AE0003447010024090018274A04000000000070
-:106AF00000000000000000003C06005034C302000B
-:106B0000AF440038AF45003CAF430030014018218E
-:106B10008F4B0000316800201100FFFD2406007F2C
-:106B20002408FFFF8C6C000024C6FFFF24630004D0
-:106B3000ACEC000014C8FFFB24E7000400000000D8
-:106B400000000000000000003C0F0020AF4F0030AC
-:106B50000000000024AD020001A5702B2529FFFFD5
-:106B6000008E20211520FFE101A0282103E000086C
-:106B70000000000027BDFFE0AFB10014AFBF001858
-:106B8000AFB000103C05600E8CA20034008088215C
-:106B9000144000063C0460008C87201C2408FFFC85
-:106BA00000E8302434C30001AC83201C8F8B001C10
-:106BB00024090001ACA90034956900028D65001418
-:106BC0008D70000C2D2400818D6700048D660008F7
-:106BD000108000078D6A00102D2C00041580000E17
-:106BE00030CE0007312D000311A0000B0000000083
-:106BF0002404008B020028210E0006EF2406000367
-:106C00000011102B8FBF00188FB100148FB000102F
-:106C100003E0000827BD002015C0FFF62404008B08
-:106C20003C030020AF4300300000000024020001BC
-:106C3000AF8200140000000000000000000000000F
-:106C40003C1F0150013FC825253800033C0F600E52
-:106C5000AF47003800181882AF46003C35E8003CCA
-:106C6000AF590030274704008F44000030860020D1
-:106C700010C0FFFD00000000106000082466FFFF48
-:106C80002403FFFF8CEB000024C6FFFF24E7000471
-:106C9000AD0B000014C3FFFB250800043C08600E88
-:106CA000AD090038000000000000000000000000F6
-:106CB0003C070020AF470030000000000E0007171F
-:106CC0000140202102002821000020210E0006EFB3
-:106CD000240600030011102B8FBF00188FB1001481
-:106CE0008FB0001003E0000827BD002027BDFFD8AB
-:106CF000AFB200183092FFFFAFB10014AFBF002059
-:106D0000AFB3001CAFB000101240002C000088216F
-:106D10000A0007AF2413000150B3003C8CE5000CBF
-:106D20000000000D262D000131B1FFFF24EC0020F2
-:106D30000232382B10E00021AF8C001C8F8200142F
-:106D40001440001E8F87001C3C0670003C0320008E
-:106D50008CE400000086282414A300188F85003CD2
-:106D6000000444023C0980000089802414A0FFEA4A
-:106D7000310600FF2404000210C4001F28CA0003CB
-:106D800011400016240B000314D3FFE7262D000149
-:106D9000020028210E0006FD240400018F87001C3C
-:106DA000AF82003C262D000131B1FFFF24EC002012
-:106DB0000232382B14E0FFE1AF8C001C02201021BE
-:106DC0008FBF00208FB3001C8FB200188FB100144A
-:106DD0008FB0001003E0000827BD002814CBFFD2BD
-:106DE000262D00010E00073D020020218F87001C88
-:106DF0000A0007C9AF82003C020028210E0006FDF0
-:106E0000000020210A0007C88F87001C0E0006EF33
-:106E1000240400841600FFC38F87001C0A0007A902
-:106E2000AF80003C3082FFFF1440000300001821B7
-:106E30000004240224030010308500FF14A0000584
-:106E40003087000F246600080004220230C300FFD0
-:106E50003087000F14E00005308900032468000427
-:106E600000042102310300FF3089000315200005D2
-:106E7000388B0001246A000200042082314300FFA5
-:106E8000388B00013164000110800002246C000185
-:106E9000318300FF03E0000800601021308BFFFF0A
-:106EA000000B394230E600FF3C09080025295998BB
-:106EB00000064080010960218D8700003164001FB9
-:106EC000240A0001008A180430A500FF00E32025F1
-:106ED00014A000020003102700E22024240F000168
-:106EE00000CF700401096821000E282714800005D6
-:106EF000ADA400008F86000C00A6102403E000085B
-:106F0000AF82000C8F88000C01C8102503E0000838
-:106F1000AF82000C3C06001F3C0360003084FFFF82
-:106F200034C5FF8024020020AC602008AC60200C37
-:106F3000AC602010AC652014AC642018AC6220005A
-:106F4000000000000000000003E000080000000056
-:106F500027BDFFE82402FFFFAFBF0010AF82000C87
-:106F6000000020213C06080024C659982405FFFF94
-:106F700024890001000440803124FFFF010618210C
-:106F80002C87002014E0FFFAAC6500000E000825F5
-:106F900000002021240200013C04600024050020A0
-:106FA000AC822018AC85200000000000000000002A
-:106FB00000000000244A00013142FFFF2C4604007B
-:106FC00014C0FFF78FBF001003E0000827BD0018B2
-:106FD0008F8300082C62040003E00008384200019F
-:106FE0008F8300082462000103E00008AF820008DC
-:106FF0008F8300082462FFFF03E00008AF820008CF
-:1070000027BDFFE0AFB10014AFBF0018AFB0001054
-:107010008F6B00303C06600000808821ACCB2008DC
-:107020008F6A002C3C02800024030008ACCA200CAC
-:107030009769003A9768003800092C003107FFFF74
-:1070400000A72025ACC42010ACC22014ACC3200083
-:107050000000000000000000000000003C03600091
-:107060008C6D200031AC00081580FFF90000000095
-:107070008C6E201405C00020000000000E0007E9FF
-:107080008F84000C000240803C0908002529599893
-:10709000010938218CE400000E0007E9000281405C
-:1070A000020220213090FFFF020020210E0008077D
-:1070B000000028213C0C8000022C58253210FFFFD4
-:1070C0003C116000240A0020AE2B2014AE302018A2
-:1070D000AE2A2000000000000000000000000000B8
-:1070E000020010218FBF00188FB100148FB0001064
-:1070F00003E0000827BD00208C6620143C02001F1E
-:107100003443FF803C1FFFE800C3C02437F9080068
-:1071100003198021001079C23C0C8000022C5825F4
-:1071200031F0FFFF3C116000240A0020AE2B201438
-:10713000AE302018AE2A2000000000000000000041
-:1071400000000000020010218FBF00188FB1001452
-:107150008FB0001003E0000827BD002027BDFFE826
-:10716000AFB000103402FFFF3090FFFFAFBF00143C
-:1071700012020006020020210E0008250000000077
-:10718000020020210E000807240500018F8400085A
-:107190008FBF00148FB000102483FFFF27BD00189D
-:1071A00003E00008AF830008000439C230E6003F66
-:1071B00000043B4200071840240210002CC40020A9
-:1071C00024C8FFE0AF42002C2463000114800003B8
-:1071D00030A900FF00071840310600FF000360805F
-:1071E00024080001019A58213C0A000E00C8280416
-:1071F000016A382111200005000530278CE90000C4
-:107200000125302503E00008ACE600008CEE00000C
-:1072100001C6682403E00008ACED000027BDFFE8CC
-:10722000AFBF0014AFB000103C0460008C850808AC
-:107230003403F00030A2F0005043000624020001A5
-:107240008C8708083404E00030E6F00010C4001E0B
-:1072500024020002AF8200403C1060003C0A0200A1
-:10726000AE0A0814240910003C08000E8E034400E6
-:1072700003482021AF49002C240501200E000CCF2B
-:10728000000030218F830040106000043C02169102
-:10729000240B0001106B000E3C023D6C344F00903B
-:1072A000AE0F44088FBF00148FB000103C0C60007C
-:1072B000240E10003C0D020027BD0018AD8E4420A6
-:1072C00003E00008AD8D08100A0008F6AF8000400A
-:1072D0003C0218DA344F0090AE0F44088FBF001400
-:1072E0008FB000103C0C6000240E10003C0D02001A
-:1072F00027BD0018AD8E442003E00008AD8D0810B6
-:107300000A0008CA240500010A0008CA0000282152
-:107310003C08080025085DA42404FFFF0100182193
-:107320002402001E2442FFFFAC6400000441FFFD64
-:10733000246300043C07080024E75E208CE5FFFC82
-:107340002404001C24060001308A001F0146480462
-:1073500024840001000910272C8300201460FFFA08
-:1073600000A22824ACE5FFFC3C05666634A4616EEF
-:107370003C06080024C65EE0AF840058AF88009C3D
-:107380002404FFFF00C018212402001F2442FFFF35
-:10739000AC6400000441FFFD246300043C07666602
-:1073A0003C05080024A55EA0AF86004834E6616E67
-:1073B000AF8600982404FFFF00A018212402000FCC
-:1073C0002442FFFFAC6400000441FFFD246300047D
-:1073D0003C0B66663C06080024C65E203568616E7C
-:1073E000AF8500A4AF8800702404FFFF00C01821FF
-:1073F0002402001F2442FFFFAC6400000441FFFD93
-:10740000246300043C0D66663C0A0800254A5F6060
-:1074100035AC616EAF860090AF8C005C2404FFFF3A
-:1074200001401821240200032442FFFFAC64000045
-:107430000441FFFD246300043C09080025295F7016
-:107440008D27FFFC24040006240500013099001F4D
-:107450000325C00424840001001878272C8E002006
-:1074600015C0FFFA00EF3824AD27FFFC3C09666623
-:1074700024030400240403DC24050200240600661F
-:107480003522616E3C08080025085AA4AF820074BA
-:10749000AF830044AF83006CAF830050AF830084A0
-:1074A000AF8A008CAF840064AF85004CAF86005477
-:1074B000AF840078AF850060AF860080010018219E
-:1074C000240200022442FFFFAC6000000441FFFDE3
-:1074D00024630004240400032403000C3C0A080075
-:1074E000254A5AB0AF8A00680A00099D2405FFFFAB
-:1074F0000004188024840001006858212C8700C0F3
-:1075000014E0FFFBAD6500003C0E666635CD616E94
-:10751000240C17A024081800AF8D0088AF8C0094AD
-:1075200003E00008AF88007C2484007F000421C2AF
-:1075300000004021000030210000382100002821F7
-:107540000A0009B4AF8400A01060000624E700011F
-:1075500000C4302124A500012CC20BF51440FFFA11
-:107560002CA300663C09080025295F600120182132
-:10757000240200032442FFFFAC6000000441FFFD31
-:107580002463000410E0001A24E3FFFF00032942F3
-:1075900010A0000A000020212406FFFF3C03080081
-:1075A00024635F60248400010085502BAC660000DA
-:1075B000250800011540FFFB2463000430E2001F92
-:1075C0001040000800086880240C0001004C3804BA
-:1075D000000858800169282124E6FFFF03E0000825
-:1075E000ACA6000001A940212409FFFFAD0900005D
-:1075F00003E0000800000000AF4400283C04000C39
-:1076000003442021000528820A000CCF000030210D
-:10761000000421803C036000AC64100800000000FE
-:1076200000052980AC65100C0000000003E0000894
-:107630008C62100C27BDFFE800802821240400384C
-:10764000AFBF00140E0009E4AFB0001024040E0018
-:10765000AF4400283C10000C0350202124050010EA
-:107660000E000CCF0000302103501021AC40000070
-:10767000AC400004240400388FBF00148FB0001009
-:1076800024053FFF27BD00180A0009E48C430000D1
-:10769000000421803C036000AC641008000000007E
-:1076A0008C62100C03E000080002118227BDFFC8A5
-:1076B000AFB400208F940068AFBE0030AFB7002C8D
-:1076C000AFB600280000B8210080B021241E00C001
-:1076D000AFBF0034AFB50024AFB3001CAFB2001889
-:1076E000AFB10014AFB000100A000A21AFA5003CF2
-:1076F000504000018F94006827DEFFFF13C0002870
-:10770000269400048E9200003C03080024635DA0D0
-:107710001240FFF70283102B3C04080024845AA473
-:10772000028410230002A8C0000098210A000A3039
-:1077300024110001001188401220002600000000E2
-:1077400002B38021025128240200202110A0FFF959
-:10775000267300010E0009ED0000000000166840CD
-:1077600032EC000101AC20210E0009E402002821C6
-:107770008F89009426F700018FA6003C3AEB0001A8
-:10778000316A00012528FFFF0011382702CAB02105
-:10779000AF88009416E6FFE702479024AE920000FF
-:1077A00002E010218FBF00348FBE00308FB7002C55
-:1077B0008FB600288FB500248FB400208FB3001C33
-:1077C0008FB200188FB100148FB0001003E00008D2
-:1077D00027BD00383C0E080025CE5DA0028E102B80
-:1077E0000A000A1CAE92000027BDFFD8AFB10014FA
-:1077F000AFB00010AFBF0020AFB3001CAFB2001895
-:1078000000A0882110A0001F000480403C13080045
-:1078100026735AA40A000A692412000112200019D2
-:10782000261000010E000A0402002021000231424D
-:107830002444FFA0000618803045001F2C8217A1A9
-:10784000007318212631FFFF1040FFF400B230040E
-:107850008C6900000200202124053FFF01264024FE
-:107860001500FFEE012638250E0009E4AC67000084
-:107870008F8A009426100001254700011620FFE999
-:10788000AF8700948FBF00208FB3001C8FB2001809
-:107890008FB100148FB0001003E0000827BD00284E
-:1078A0008F85009C00805821000040210000482165
-:1078B000240A001F3C0C0800258C5E1C3C0D0800AF
-:1078C00025AD5DA48CA6000050C00014000040212E
-:1078D00000AD1023000238C0240300010A000AA2F0
-:1078E000000020211500000300E41021244820247A
-:1078F0000000482125290001512B00132506DFDC5B
-:10790000106000062484000100C3702415C0FFF538
-:10791000000318400A000AA00000402110AC002615
-:1079200024A3000400602821254AFFFF1540FFE53D
-:10793000AF85009C512B00042506DFDC00004021B0
-:1079400003E00008010010210006614230C5001F5D
-:10795000000C50803C07080024E75DA424040001CB
-:10796000014730211120000F00A420043C0508002D
-:1079700024A55E20148000052529FFFF24C60004ED
-:1079800010C5001100000000240400018CCF00008D
-:107990000004C0270004204001F868241520FFF5EA
-:1079A000ACCD00008F99007801001021032B4823F3
-:1079B00003E00008AF8900783C05080024A55DA419
-:1079C0000A000AAA000040213C06080024C65DA463
-:1079D0000A000AC324040001308800FF24020002C8
-:1079E0001102000A240300031103005C8F8900A424
-:1079F000240400041104005F24050005110500673C
-:107A00000000182103E00008006010218F89004861
-:107A10003C0C0800258C5EE03C04080024845F6078
-:107A2000240300201060000F00005821240D0002E4
-:107A3000240E00033C0F080025EF5EE08D270000B8
-:107A400014E0000B30F9FFFF252900040124C02BAE
-:107A500053000001018048212463FFFF5460FFF8B8
-:107A60008D2700000160182103E00008006010214C
-:107A7000132000323C0500FF30E200FF00403021BF
-:107A80001040004200005021240500010000202188
-:107A90000005C84000A6C02417000003332500FFDE
-:107AA00014A0FFFB24840001012CC023001828C06F
-:107AB00000AA6021008C50213144001F240C0001D9
-:107AC000008C18040003102700E23024110D00413F
-:107AD000AD260000110E004C000A1840110D0036B2
-:107AE0008F87006C510E00568F8C0060240D0004AF
-:107AF000110D005A8F8E0084240E0005150EFFDA3A
-:107B000001601821240B14301140000600001821D8
-:107B10008F8400A024630001006A402B1500FFFD44
-:107B2000016458218F8A0080AF89008C0160182180
-:107B30002549FFFF0A000AFAAF89008000E52024EA
-:107B4000000736021080FFD0240A001800075402F4
-:107B5000314600FF0A000B02240A00103C0C08000A
-:107B6000258C5EA03C04080024845EE00A000AE93B
-:107B7000240300103C0C0800258C5E203C04080007
-:107B800024845EA00A000AE88F89009000071A0288
-:107B9000306600FF0A000B02240A00088F89008C5F
-:107BA0003C0C0800258C5F603C04080024845F7056
-:107BB0000A000AE924030004000A4080250B003073
-:107BC00024E6FFFF01601821AF8900480A000AFA85
-:107BD000AF86006C000AC982001978803C07080053
-:107BE00024E75EA001E72021000A18428C8F0000E4
-:107BF0003079001F032C38040007C02701F86024E7
-:107C00000A000B17AC8C00000003314200062880EC
-:107C100000AF28213062001F8CB8000024630001EF
-:107C2000004CC804000321420019382700041080CA
-:107C300003073024004F20210A000B5BACA6000094
-:107C4000000A68C025AB0032258AFFFF01601821B9
-:107C5000AF8900A40A000AFAAF8A0060254B1030F1
-:107C6000AF8900900160182125C9FFFF0A000AFAB8
-:107C7000AF890084308600072CC200061040001433
-:107C800000000000000640803C030800246357D039
-:107C9000010338218CE4000000800008000000008F
-:107CA0002409000310A9000E00000000240A0005AA
-:107CB00010AA000B00000000240B000110AB00080C
-:107CC000000000008F8C00A010AC00050000000038
-:107CD00003E00008000010210A000A8800A020210B
-:107CE0000A000AD600C0202127BDFFE8308400FF2B
-:107CF000240300021083000BAFBF00102406000312
-:107D00001086003A2408000410880068240E00053C
-:107D1000108E007F2CAF14308FBF001003E00008DE
-:107D200027BD00182CA200301440FFFC8FBF0010AC
-:107D300024A5FFD0000531C2000668803C0708007A
-:107D400024E75EE001A730218CC9000000052882ED
-:107D500030AC001F240B0001018B50048F840048BD
-:107D6000012A4025ACC800008C830000506000014F
-:107D7000AF8600488F98006C30AE000124A6FFFF4C
-:107D8000270F000115C00002AF8F006C24A6000170
-:107D90000006414200082080008718218C790000ED
-:107DA00030C2001F240600010046F804033F3824B7
-:107DB00010E0FFDA8FBF00100005C182001870804C
-:107DC0003C0F080025EF5EA001CF48218D2B00005D
-:107DD0000005684231A5001F00A66004016C502513
-:107DE00027BD001803E00008AD2A00002CA70030D2
-:107DF00014E0FFCA8FBF001030B900071723FFC778
-:107E000024A8FFCE00086A02000D60803C0B080029
-:107E1000256B5EA0018B30218CC40000000828C2B5
-:107E200030AA001F24080001014848048F8200A4E2
-:107E300000891825ACC300008C5F000053E00001EE
-:107E4000AF8600A400057040000E7942000F288024
-:107E50003C04080024845EE000A418218C6B000020
-:107E600025DF000131CD001F001F514201A8600431
-:107E7000016C4825000A1080AC69000000442821EC
-:107E80008CA600008F98006033F9001F8FBF001090
-:107E90000328380400C77825270E000127BD0018E5
-:107EA000ACAF000003E00008AF8E006024A5EFD067
-:107EB0002CB804001300FF998FBF00100005314259
-:107EC000000658803C0A0800254A5E20016A3021DD
-:107ED0008CC4000030A3001F2409000100691004B5
-:107EE0008F9900900082F825ACDF00008F270000FA
-:107EF00050E00001AF8600908F8D00848FBF00108E
-:107F000027BD001825AC000103E00008AF8C0084F9
-:107F100015E0FF828FBF00108F8600A00006104082
-:107F20000046F821001F210003E4C8210019384051
-:107F300024F8143000B8402B1100FF788FBF0010D8
-:107F400024A4EBD00E00020300C0282100027942D5
-:107F5000000F70803C0D080025AD5F6001CD202131
-:107F60008C8B0000304C001F240600010186180491
-:107F70008F89008C01635025AC8A00008D2500009C
-:107F800050A00001AF84008C8F9800808FBF00103C
-:107F900027BD00182708000103E00008AF88008013
-:107FA00030A500072403000310A3001028A200043A
-:107FB00014400008240700022403000410A3001545
-:107FC0002408000510A8000F8F8500A003E000081A
-:107FD0000000000014A7FFFD0080282114C3FFFB50
-:107FE000240400020A000B9A000000002409000586
-:107FF0000080282110C9FFFB2404000303E00008CF
-:108000000000000014C5FFF1008028210A000B9A2F
-:1080100024040005240A00010080282110CAFFF171
-:108020002404000403E000080000000027BDFFE076
-:10803000AFB00010000581C22603FFD024C5003F69
-:108040002C6223D024C6007FAFB20018AFB1001459
-:10805000AFBF001C309100FF000691C200052982CD
-:1080600002002021104000082403FFFF0E000A5ADE
-:108070000000000002002021022028210E000C48F0
-:1080800002403021000018218FBF001C8FB2001861
-:108090008FB100148FB000100060102103E00008C1
-:1080A00027BD002027BDFFD824A2007FAFB3001C4E
-:1080B000AFB20018000299C2309200FF24A3003F23
-:1080C0000240202102602821AFB10014AFB000109F
-:1080D000AFBF00200E000B7D00038982004080218D
-:1080E000004020210220282114400009000018210E
-:1080F0008FBF00208FB3001C8FB200188FB1001407
-:108100008FB000100060102103E0000827BD002898
-:108110000E000A0B00000000004028210200202170
-:108120001051FFF3001019C00E000A5A00000000A1
-:1081300002002021024028210E000C48026030215C
-:108140008FBF00208FB3001C8FB200188FB10014B6
-:108150008FB00010000018210060102103E000081B
-:1081600027BD00283084FFFF30A5FFFF10800007E7
-:10817000000018213082000110400002000420425B
-:10818000006518211480FFFB0005284003E000086B
-:108190000060102110C00007000000008CA2000049
-:1081A00024C6FFFF24A50004AC82000014C0FFFB1E
-:1081B0002484000403E000080000000010A0000870
-:1081C00024A3FFFFAC8600000000000000000000B8
-:1081D0002402FFFF2463FFFF1462FFFA24840004DB
-:1081E00003E000080000000030A5FFFF8F4201B847
-:1081F0000440FFFE3C07601500A730253C0310003B
-:10820000AF440180AF400184AF46018803E000081D
-:10821000AF4301B88F8500D02C8640000080182124
-:108220008CA700840087102B144000100000000071
-:108230008CA800842D06400050C0000F240340008D
-:108240008CAA0084008A482B512000018CA3008452
-:1082500000035A42000B20803C05080024A558204A
-:108260000085182103E000088C62000014C0FFF4B0
-:10827000000000002403400000035A42000B20804D
-:108280003C05080024A558200085182103E00008BB
-:108290008C6200008F8300D0906600D024C500015E
-:1082A000A06500D08F8500D0906400D090A200D24D
-:1082B0001044001700000000936C00788F8B00BC06
-:1082C000318A00FFA16A000C25490001938700C490
-:1082D000312200FF3048007F1107000B00026827A1
-:1082E000A36200788F4E017805C0FFFE8F9900B021
-:1082F000241800023C0F1000AF590140A35801445C
-:1083000003E00008AF4F01780A000D1831A2008089
-:10831000A0A000D00A000D0E000000008F8700D042
-:1083200027BDFFC8AFBF0030AFB7002CAFB60028E5
-:10833000AFB50024AFB40020AFB3001CAFB200183B
-:10834000AFB10014AFB0001094E300E094E200E29B
-:10835000104300D72405FFFF3C047FFF3497FFFF45
-:108360002415FF800A000DFF3C16000E108A00D174
-:108370008FBF00308F9100B03C1808008F18005C50
-:10838000001230C0001291400311702101D57824F1
-:10839000AF4F002C94EC00E231CD007F01BA5821A0
-:1083A000318A7FFF01764821000A804002091021AE
-:1083B000945300003C0808008D0800580246C02174
-:1083C00032733FFF0013198001032021022428216A
-:1083D00030BF007F03FAC82100B5A024AF54002CA1
-:1083E0000336A0218E8700108E8F0030037858212D
-:1083F000256D008800EF7023240C0002AE8E001063
-:10840000AF8D00ACA16C0088976A003C8E84003070
-:108410008F9100AC0E000CE53150FFFF00024B8045
-:10842000020940253C02420001022025AE2400043E
-:108430008E8300048F8D00AC8E860000240E000811
-:10844000ADA3001CADA60018ADA0000CADA000109F
-:10845000929F000A33F900FFA5B900149685000821
-:108460003C1F000CA5A500169298000A331100FFCE
-:10847000A5B100209690000824180005A5B00022A0
-:10848000ADA00024928F000B2410C00031E700FF44
-:10849000A5A70002A1AE00018E8C00308F8B00AC2E
-:1084A0008F8400B0AD6C00083C0A08008D4A00546F
-:1084B0000144482101354024AF4800283C0208000F
-:1084C0008C4200540044302130C3007F007AC82120
-:1084D000033F282102458821AF9100BCAF8500C031
-:1084E000A23800008F8A00BC2403FFBF2418FFDFDE
-:1084F000954F000201F0382400F37025A54E0002CC
-:10850000914D000231AC003F358B0040A14B000281
-:108510008F8600BC8F8900D0ACC000048D28007C01
-:108520003C098000ACC8000890C4000D3082007F78
-:10853000A0C2000D8F8500BC90BF000D03E3C824CE
-:10854000A0B9000D8F9100BC9233000D02789024E9
-:10855000A232000D8E9000348F8B00BCAD700010E5
-:108560008E87002C8E8F003000EF7023AD6E0014CC
-:10857000916D001831AC007FA16C00188F9F00BC7A
-:108580008E8A00308FE8001801572024010930241A
-:1085900000C41025AFE200189283000AA3E3001C78
-:1085A000969900088F8500BC8F9800D0A4B9001E52
-:1085B0008E9000308E8400300E0002038F05008400
-:1085C0008F8500D0000291400002990090AF00BC5E
-:1085D000025388210040302131E7000210E00003FF
-:1085E00002118021000290800212802190B900BC0B
-:1085F0003327000410E000020006F880021F8021EB
-:108600008E9800308F8B00BC24068000330F00034F
-:10861000000F702331CD0003020D6021AD6C00040A
-:1086200094A400E294AA00E294B000E231497FFFF2
-:108630002522000130537FFF0206182400734025D5
-:10864000A4A800E294A400E23C1408008E94006008
-:1086500030917FFF12340022000000000E000D0553
-:10866000000000008F8700D00000282194F300E074
-:1086700094F000E21213000F8FBF003090E900D099
-:1086800090E800D1313200FF310400FF0244302B6A
-:1086900014C0FF36264A000190EE00D2264B00019E
-:1086A00031CD00FF008D6021158BFF338F9100B01D
-:1086B0008FBF00308FB7002C8FB600288FB50024F5
-:1086C0008FB400208FB3001C8FB200188FB100143C
-:1086D0008FB0001000A0102103E0000827BD003873
-:1086E00094A300E200664024A4A800E290A400E263
-:1086F00090B900E2309100FF0011A1C20014F827E8
-:10870000001F39C03332007F024730250A000DF7C1
-:10871000A0A600E23084FFFF30A5FFFFAF440018A1
-:10872000AF45001C03E000088F42001427BDFFB8CE
-:10873000AFB000208F9000D03084FFFFAFA40010B6
-:10874000AFBF0044AFBE0040AFB7003CAFB600388B
-:10875000AFB50034AFB40030AFB3002CAFB20028D7
-:10876000AFB10024A7A00018920600D1920500D056
-:1087700030C400FF30A300FF0064102B1040012222
-:10878000AFA00014920900D08FB50010312800FF6F
-:108790000088382324F4FFFF0014882B0015982B41
-:1087A00002339024524001268FB40014961E00120A
-:1087B000961F00108FB7001003DFC82300171400A6
-:1087C0000019C400000224030018140302E2B02AB6
-:1087D00052C00001004020210284282B10A000027A
-:1087E000008018210280182100033C0000071C03B0
-:1087F0003064FFFF2C86000914C000020060B8211D
-:10880000241700088E0A0008001769808E09000CE2
-:1088100031ABFFFF3C0C0010016C402527520400D7
-:10882000AF4A0038AF9200B8AF49003CAF480030C3
-:108830000000000000000000000000000000000038
-:108840000000000000000000000000000000000028
-:108850008F4F000031EE002011C0FFFD0017982A55
-:10886000027110240A000E920000B02155E00101AF
-:108870009258000131130080126001CF01202021A5
-:108880009655001232A5FFFF0E000CDAA7B50018AE
-:108890008F9000D00291A02326C800018F9100B8CC
-:1088A0000008B4000016B403262C004002D7782A32
-:1088B0000014882B240B00010180902101F1102469
-:1088C000AF8C00B8AFAB0014104001BC8F8900B072
-:1088D0003C0C08008D8C0054240BFF80921E00D0AD
-:1088E00001895021014B2824921900D0AF4500285E
-:1088F0008E4700103C0808008D0800583C180800FE
-:108900008F18005430E33FFF000321800104302121
-:10891000012658212402FF800162F824920C00D025
-:10892000AF5F002C9248000033D100FF333500FFC9
-:108930000309982100117140001578C0326D007F45
-:1089400001CF382101BA2821318300FF3164007F33
-:108950003C0A000C00AA88210367F0210003314083
-:10896000009A10213108003F3C1F000E00D1C021A9
-:10897000005F982127D900882D150008AF9100C00D
-:10898000AF9900ACAF9800BCAF9300B412A0018ABD
-:1089900000008821240E0001010E4004310D005D0D
-:1089A00011A0FFB2310F00028E4A00283C03008064
-:1089B0003C04FFEFAE6A00008E450024A260000A6E
-:1089C0003488FFFFAE6500049247002C3C1FFF9FD8
-:1089D00037FEFFFFA267000C8E62000C3C180040BF
-:1089E000A267000B0043302500C8C824033E88243A
-:1089F0000238A825AE75000C8E490004AE60001840
-:108A00003C0F00FFAE6900148E4D002C35EEFFFFC9
-:108A10008F8B00B001AE6024AE6C00108E47000852
-:108A2000A660000896450012AE6700208E42000C3A
-:108A300030B03FFF00105180AE6200248E5E001403
-:108A4000014B182130A40001AE7E00288E59001879
-:108A5000000331C200044380AE79002C8E51001C0B
-:108A600000C8F821A67F001CAE71003096580002A5
-:108A70008E550020A678001EAE7500349249003352
-:108A80003130000456000005925000008F8C00D059
-:108A90008D8B007CAE6B0030925000008F8F00BC3D
-:108AA000A1F00000924E003331CD000251A000072A
-:108AB000925E00018F8900BC2418FF809131000074
-:108AC0000311A825A1350000925E00018F9900BC1A
-:108AD0002409FFBF240BFFDFA33E00018F9500BCDC
-:108AE00092B8000D3311007FA2B1000D8F8E00BC33
-:108AF00091D0000D02097824A1CF000D8F8800BC11
-:108B00008E6D0014910A000D2DAC0001000C29405F
-:108B1000014B382400E51825A103000D96420012F0
-:108B20008F8800BC8F8700D0A50200028E4500040C
-:108B300090FF00BC30A400030004302330DE0003AB
-:108B400000BE102133F90002172000022444003433
-:108B50002444003090E200BC00A2302430DF000446
-:108B600017E0000224830004008018218F8F00ACDE
-:108B700024090002AD030004A1E90000924E003F69
-:108B80008F8D00ACA1AE00018F9500AC924C003FE0
-:108B90008E440004A6AC0002976B003C0E000CE56E
-:108BA0003170FFFF00025380020A38253C05420065
-:108BB00000E51825AEA300048F8600AC8E4800386F
-:108BC000ACC800188E440034ACC4001CACC0000C0F
-:108BD000ACC00010A4C00014A4C00016A4C00020A3
-:108BE000A4C00022ACC000248E6400145080000198
-:108BF00024040001ACC400080E000D05241100017E
-:108C00000A000E858F9000D0920F00D2920E00D0F5
-:108C10008FB5001031EB00FF31CD00FF008D6023D8
-:108C2000016C50212554FFFF0014882B0015982B50
-:108C3000023390241640FEDD000000008FB40014C3
-:108C40008FBF00448FBE00403A8200018FB7003CC6
-:108C50008FB600388FB500348FB400308FB3002C3E
-:108C60008FB200288FB100248FB0002003E00008ED
-:108C700027BD004833110020122000EE241500010A
-:108C8000921E00BC241F00010000A82133D900015E
-:108C90001320000DAFBF001C8E4400148E0800840A
-:108CA0000088102B14400002008030218E060084C2
-:108CB0008E03006400C3A82B16A0000200C0202170
-:108CC0008E0400640080A8218E4700148E05006485
-:108CD00000E5302B14C0000200E020218E04006467
-:108CE0000095F02313C000048FAC001C240A00027E
-:108CF000AFAA001C8FAC001C028C582B156000A87A
-:108D0000000018218E4F00388E6D000C3C0E008044
-:108D1000AE6F00008E4A00343C10FF9F01AE582514
-:108D2000AE6A00049246003F360CFFFF016C382407
-:108D30003C0500203C03FFEFA266000B00E5102578
-:108D40003468FFFF8F8700B80048F8243C0400080F
-:108D500003E4C825AE79000C8CF80014AE6000184E
-:108D600002BE7821AE7800148CF10018AE71001CA0
-:108D70008CE90008AE6900248CEE000CAE6F002C6C
-:108D8000AE600028AE6E0020A6600038A660003AF3
-:108D90008CED001401B58023021E902312400011B7
-:108DA000AE72001090EA003D8E6500048E640000F3
-:108DB000000A310000A6C821000010210326402B24
-:108DC0000082F82103E8C021AE790004AE780000EB
-:108DD00090F1003DA271000A8F8900B8953200061B
-:108DE000A67200088F9800AC2419000202A020216E
-:108DF000A31900009769003C8F9200AC0E000CE5AF
-:108E00003131FFFF00027B808F8500B8022F68257B
-:108E10003C0E420001AE8025AE5000048F8400ACB1
-:108E20008CAC0038AC8C00188CAB0034AC8B001CC4
-:108E3000AC80000CAC800010A4800014A48000164C
-:108E4000A4800020A4800022AC80002490A7003FD2
-:108E5000A487000212A001342403000153C00002C1
-:108E600090A2003D90A2003E24480001A08800018D
-:108E70008F9F00ACAFF500088F8300D0240700342B
-:108E8000906600BC30C5000250A0000124070030ED
-:108E90008F9200B88F8A00BC906D00BC924B00008E
-:108EA0002412C00032A50003A14B00008F8600B839
-:108EB0008F8800BC2402000490C4000100451823E0
-:108EC00030790003A10400018F8A00BC8F9F00B895
-:108ED00000F538219558000297E9001200F9382171
-:108EE00003128824312F3FFF022F7025A54E000268
-:108EF0009150000231A80004320C003F358B004035
-:108F0000A14B000212A000028F8500BC00E83821AE
-:108F10008F8E00D0ACA70004240BFFBF8DCD007C4A
-:108F20002EA400012403FFDFACAD000890B0000DBB
-:108F300000044140320C007FA0AC000D8F8600BCC5
-:108F400090CA000D014B1024A0C2000D8F8700BCF9
-:108F500090E5000D00A3F82403E8C825A0F9000D52
-:108F60008F9100B88F8D00BC8E380020ADB80010F6
-:108F70008E290024ADA900148E2F0028ADAF001853
-:108F80008E2E002C0E000D05ADAE001C8FB0001C07
-:108F9000240C0002120C00ED8F9000D08FA3001C57
-:108FA00000608821146000020060A8210000A02158
-:108FB00056A0FE390291A0230014882B8FAE00101A
-:108FC000960700103C0A002001D6F02302C7C021FA
-:108FD00033D2FFFFA6180010AFB20010AF4A003026
-:108FE0000000000096170010961300121277008EF2
-:108FF000001641808E16000C8E0F0008000817C363
-:1090000002C8282100A8582B01E2A82102AB182190
-:10901000AE05000CAE0300088FB300100013B82B90
-:10902000023780241200FF058F9000D00A000E4BFB
-:10903000000000008E480038A6600008240F0003DE
-:10904000AE6800008E4C0034A260000A8F9000B819
-:10905000AE6C00043C050080920B003FA26F000C38
-:109060008E62000C3C11FF9FA26B000B004568252F
-:109070003623FFFF3C04FFEF8F8C00B801A33024A0
-:10908000349FFFFF00DFC824AE79000C8D890014E7
-:10909000959E00128F9800B0AE6900108D8E00145E
-:1090A000AE600018AE600020AE6E0014AE6000240A
-:1090B0008D87001833CE3FFF000E5180AE67002829
-:1090C0008D8800080158902133D00001AE6800302F
-:1090D0008D91000C8F8D00AC001259C200107B8066
-:1090E000016F282124020002A665001CA66000363C
-:1090F000AE71002CA1A200009763003C8F9800ACD9
-:109100003C044200307FFFFF03E43025AF0600043B
-:109110008F9900B824070001240BC0008F3300385A
-:1091200024060034AF1300188F290034AF09001C47
-:10913000AF00000CAF000010A7000014A70000163D
-:10914000A7000020A7000022AF000024A7150002FE
-:10915000A30700018F8A00AC8F9E00B88F8C00BCE3
-:10916000AD55000893C80000A18800008F9200B898
-:109170008F8F00BC92500001A1F000018F8400BCD1
-:1091800094910002022B282400AE1025A482000234
-:10919000908D000231A3003FA08300028F8300D096
-:1091A0008F8400BC907F00BC33F30002526000014A
-:1091B00024060030AC8600048C65007C240DFFBFC3
-:1091C00002A08821AC8500089082000D3043007F0A
-:1091D000A083000D8F8600BC90C4000D008DF82484
-:1091E000A0DF000D8F8E00BC91D9000D3729002023
-:1091F000A1C9000D8F9E00B88F9300BC8FC70020BF
-:10920000AE6700108FD80024AE7800148FCA0028F3
-:10921000AE6A00188FD2002C0E000D05AE72001C35
-:109220000A00104C8F9000D0960200148E040004A7
-:109230003043FFFF000368C0008DF821AF5F003CA2
-:109240008E1900048F46003C032648231920003C59
-:10925000000000008E05000024A200013C0B00105D
-:1092600035750008AF420038AF55003000000000EF
-:1092700000000000000000000000000000000000EE
-:109280000000000000000000000000008F4C000003
-:10929000318F002011E0FFFD000000008F5304001B
-:1092A0003C080020AE1300088F570404AE17000CD2
-:1092B000AF480030000000003C0608008CC60044A7
-:1092C0002416000110D600BB000000009619001201
-:1092D0003C0508008CA5004000B94821A6090012F1
-:1092E000960E001425C70001A60700149618001456
-:1092F0003304FFFF5486FF498FB30010A60000140B
-:109300000E000E2530A5FFFF3C0408008C840024CD
-:10931000961F00120044682303ED3023A6060012B6
-:109320000A0010678FB30010A08300018F8200AC89
-:1093300024040001AC4400080A000FFF8F8300D012
-:109340008E0200000A0010F83C0B00108F9F00C036
-:109350008FB8001C920F00D0920B00D0920D00D05D
-:1093600031F100FF316E00FF000E28C000111140E6
-:109370000045182131A600FF036350210006C940B3
-:10938000033F382125490088AF8900ACAF8700BC76
-:10939000A15800889768003C03C020218F9100AC41
-:1093A0000E000CE53110FFFF00026380020C7825EF
-:1093B0003C0442008F8C00B801E45825AE2B000419
-:1093C0008D9100388F8B00AC00006821000D1100DA
-:1093D000AD7100188D8E00343C087FFF3504FFFF0F
-:1093E000AD6E001C9183003E8D65001C8D790018C8
-:1093F000000331000003870200A6C0210050F825B9
-:109400000306482B033F382100E95021AD78001CAA
-:10941000AD6A0018AD60000CAD600010918F003E89
-:109420002405000503C45024A56F00149591000481
-:1094300003C02021A5710016918E003EA56E00206C
-:10944000958D0004A56D0022AD6000249190003F31
-:10945000A57000029182003D24430001A163000138
-:109460008F8600AC8F9F00BCACDE0008A3E5000037
-:109470008F9000BC8F9900B82405FFBF96070002AB
-:10948000973800120247782433093FFF01E9882505
-:10949000A6110002921200022418FFDF324E003F94
-:1094A00035CD0040A20D00028F8600BC8F8C00D00D
-:1094B0002412FFFFACC000048D8B007C3C0C8000AC
-:1094C000ACCB000890C2000D3043007FA0C3000D5C
-:1094D0008F8700BC90FF000D03E5C824A0F9000DA4
-:1094E0008F9100BC9229000D01387824A22F000D25
-:1094F0008F9000BCAE120010AE150014920E001832
-:109500002415FF8002AE6825A20D00188F8500BCCF
-:109510008F8300B88CAB0018016C1024004A3025F2
-:10952000ACA600189068003EA0A8001C8F9F00B851
-:109530008F8700BC8F9800D097F90004A4F9001E13
-:109540000E0002038F0500848F8600D00002794050
-:109550000002490090D200BC01E988210040282186
-:109560003255000212A0000303D120210002A8807E
-:109570000095202190CC00BC3192000412400003E1
-:1095800033C900030005408000882021241900040D
-:109590008F9E00BC0329382330F800030098502127
-:1095A000AFCA00040E000D05A66500380A0010477A
-:1095B0008F9000D0960A00123C1E08008FDE002417
-:1095C00003CA9021A61200120A0010678FB3001080
-:1095D00027BDFFE03C1808008F180050AFB0001006
-:1095E000AFBF0018AFB10014AF8400B09371007426
-:1095F000030478212410FF8031EE007F3225007FA4
-:1096000001F0582401DA68213C0C000AA38500C44B
-:1096100001AC2821AF4B002494A9001097680006E4
-:1096200090A6006200803821240200300109202326
-:1096300030C300F0AF8500D0106200193090FFFFFA
-:1096400090AE0062240DFFF0240A005001AE6024A9
-:10965000318B00FF116A002F000000001600000788
-:10966000241F0C00AF5F00248FB100148FBF0018BF
-:109670008FB0001003E0000827BD00200E000E2B65
-:1096800002002021241F0C00AF5F00248FB10014C2
-:109690008FBF00188FB0001003E0000827BD002026
-:1096A00094A200E094A400E290BF01130082182667
-:1096B0003079FFFF33E700C014E000092F310001CB
-:1096C00016000038000000005620FFE6241F0C00A2
-:1096D0000E000D27000000000A0011F9241F0C00E5
-:1096E0001620FFDE000000000E000D270000000025
-:1096F0001440FFDC241F0C00160000228F8300D0D2
-:10970000906901133122003FA06201130A0011F990
-:10971000241F0C0094AF00D48F8600D400E02821D1
-:10972000240400050E000C6B31F0FFFF144000050F
-:1097300024030003979100E6000018212625FFFF6F
-:10974000A78500E68F5801B80700FFFE3C1960139B
-:10975000AF400180241F0C00AF50018400793825F0
-:109760003C101000AF4701888FB10014AF5001B812
-:10977000AF5F00248FB000108FBF001803E0000817
-:1097800027BD00200E000E2B020020215040FFB507
-:10979000241F0C008F8300D0906901130A0012224D
-:1097A0003122003F0E000E2B020020211440FFAD9D
-:1097B000241F0C00122000078F8300D09068011333
-:1097C0003106003F34C20040A06201130A0011F9C3
-:1097D000241F0C000E000D27000000005040FFA1C8
-:1097E000241F0C008F8300D0906801133106003FC6
-:1097F0000A00125234C20040AF9B00C803E00008C8
-:10980000AF8000EC3089FFFF000940422D0200418B
-:10981000000929801440000200095040240800403B
-:10982000000879400008C0C001F85821256701A848
-:1098300000EF702125CC007F240DFF80018D1824BE
-:109840000065302100CA282125640088240A008888
-:109850003C010800AC2A004C3C010800AC2400503C
-:10986000AF8500D43C010800AC2900603C01080031
-:10987000AC2800643C010800AC2700543C010800FF
-:10988000AC2300583C010800AC26005C03E0000853
-:1098900000000000308300FF30C6FFFF30E400FF0F
-:1098A0008F4201B80440FFFE00034C00012438251C
-:1098B0003C08600000E820253C031000AF45018013
-:1098C000AF460184AF44018803E00008AF4301B80C
-:1098D0008F86001C3C096012352700108CCB0004D9
-:1098E0003C0C600E35850010316A00062D480001E1
-:1098F000ACE800C48CC40004ACA431808CC2000865
-:1099000094C30002ACA2318403E00008A78300E402
-:109910003C0308008C6300508F8400E88F86001C95
-:109920002402FF800064C0210302C824AF5900282C
-:109930008CCD00043305007F00BA78213C0E000C6A
-:1099400001EE2821ACAD00588CC80008AF8500D0CE
-:109950003C076012ACA8005C8CCC001034E800100E
-:10996000ACAC000C8CCB000CACAB000894AA00147F
-:109970003C0208008C42004425490001A4A90014BF
-:1099800094A400143083FFFF106200178F8400D06E
-:109990003C0A08008D4A0040A4AA00128CCE001890
-:1099A000AC8E00248CCD0014AC8D00208CC7001828
-:1099B000AC87002C8CCC001424060001AC8C002851
-:1099C0008D0B00BC5166001A8D0200B48D0200B8E8
-:1099D000A482003A948F003AA48F003C948800D46B
-:1099E00003E000083102FFFF3C0908008D29002434
-:1099F000A4A000148F8400D0A4A900128CCE00185B
-:109A0000AC8E00248CCD0014AC8D00208CC70018C7
-:109A1000AC87002C8CCC001424060001AC8C0028F0
-:109A20008D0B00BC5566FFEA8D0200B88D0200B4B4
-:109A3000A482003A948F003AA48F003C948800D40A
-:109A400003E000083102FFFF8F86001C3C0C080079
-:109A50008D8C0050240BFF808CCD00083C03000C43
-:109A6000000D51C0018A4021010B4824AF8A00E853
-:109A7000AF49002890C700073105007F00BA1021C8
-:109A80000043282130E400041080002FAF8500D06F
-:109A900090CF000731EE000811C0003C000000002C
-:109AA0008CD9000C8CC400140324C02B1300002696
-:109AB000000000008CC2000CACA200648CCD001829
-:109AC0002402FFF8ACAD00688CCC0010ACAC008078
-:109AD0008CCB000CACAB00848CCA001CACAA007C04
-:109AE00090A900BC01224024A0A800BC90C300079C
-:109AF0003067000810E000048F8500D090AF00BCF4
-:109B000035EE0001A0AE00BC90D90007333800014B
-:109B10001300000F8F8400D024070020908200BC27
-:109B200034490002A08900BC8F8400D09088006274
-:109B3000310300F014670006240A0034AC8A00C028
-:109B40000A001334000000000A00130E8CC2001437
-:109B500090CB00073166000210C000050000000035
-:109B6000908D00BC35AC0004A08C00BC8F8400D06C
-:109B700090980113330F003FA08F01138F8E00D0F8
-:109B800095C500D403E0000830A2FFFFACA000643C
-:109B90000A00130F0000000027BDFFD8AFB000106F
-:109BA0008F90001CAFBF0024AFB40020AFB20018EC
-:109BB000AFB10014AFB3001C9613000E3C07600A4F
-:109BC0003C1460063264FFFF369300100E001261F1
-:109BD00034F404108F8400D43C11600E0E0009AAE6
-:109BE00036310010920E00153C0708008CE700602B
-:109BF0003C12601231CD000FA38D00F08E0E0004D8
-:109C00008E0D000896080012961F00109619001A73
-:109C10009618001E960F001C310CFFFF33EBFFFF60
-:109C2000332AFFFF3309FFFF31E6FFFF3C01080045
-:109C3000AC2B00403C010800AC2C00243C01080087
-:109C4000AC2A0044AE293178AE26317C9202001550
-:109C50009603001636520010304400FF3065FFFFB7
-:109C60003C0608008CC60064AE243188AE4500B4C2
-:109C70009208001496190018241F0001011FC00447
-:109C8000332FFFFF3C0508008CA50058AE5800B8E4
-:109C9000AE4F00BC920C0014AF8E00D8AF8D00DC2C
-:109CA000318B00FFAE4B00C0920A0015AE67004832
-:109CB000AE66004C314900FFAE4900C8AE65007C7D
-:109CC0003C0308008C6300503C0408008C84004C6A
-:109CD0003C0808008D0800543C0208008C42005CDF
-:109CE0008FBF0024AE6300808FB00010AE8300747D
-:109CF0008FB3001CAE22319CAE4200DCAE2731A0F7
-:109D0000AE2631A4AE24318CAE233190AE283194EE
-:109D1000AE253198AE870050AE860054AE850070F7
-:109D20008FB10014AE4700E0AE4600E4AE4400CC74
-:109D3000AE4300D0AE4800D4AE4500D88FB400206A
-:109D40008FB2001803E0000827BD002827BDFFE000
-:109D5000AFB10014AFBF0018241100010E00085469
-:109D6000AFB0001010510005978400E6978300CC37
-:109D70000083102B144000088F8500D424070002B4
-:109D80008FBF00188FB100148FB0001000E01021B9
-:109D900003E0000827BD00200E000C892404000504
-:109DA000AF8200E81040FFF6240700020E000858BA
-:109DB0008F90001C979F00E68F9900E88F8D00C858
-:109DC00027EF0001240E0050AF590020A78F00E6B6
-:109DD000A1AE00003C0C08008D8C00648F8600C88A
-:109DE000240A8000000C5E00ACCB0074A4C0000606
-:109DF00094C9000A241FFF803C0D000C012AC024D6
-:109E0000A4D8000A90C8000A24182000011F1825B1
-:109E1000A0C3000A8F8700C8A0E000788F8500C823
-:109E200000003821A0A000833C0208008C420050B2
-:109E30008F8400E80044782101FFC824AF5900282E
-:109E4000960B000231EE007F01DA6021018D302196
-:109E5000A4CB00D4960A0002AF8600D03C0E0004CA
-:109E600025492401A4C900E68E080004ACC80004FA
-:109E70008E030008ACC30000A4C00010A4C00014EE
-:109E8000A0C000D08F8500D02403FFBFA0A000D1C8
-:109E90003C0408008C8400648F8200D0A04400D26F
-:109EA0008E1F000C8F8A00D0978F00E4AD5F001CDE
-:109EB0008E19001024100030AD590018A540003054
-:109EC000A5510054A5510056A54F0016AD4E00688F
-:109ED000AD580080AD580084914D006231AC000F48
-:109EE000358B0010A14B00628F8600D090C90063B3
-:109EF0003128007FA0C800638F8400D02406FFFFB4
-:109F00009085006300A31024A08200638F9100D08D
-:109F100000E01021923F00BC37F90001A23900BCDB
-:109F20008F8A00D0938F00F0AD580064AD5000C010
-:109F3000914E00D3000F690031CC000F018D5825E0
-:109F4000A14B00D38F8500D08F8900DCACA900E83D
-:109F50008F8800D88FBF00188FB100148FB0001009
-:109F600027BD0020ACA800ECA4A600D6A4A000E069
-:109F7000A4A000E203E000080000000027BDFFE00D
-:109F8000AFB000108F90001CAFB10014AFBF00182D
-:109F90008E1900043C1808008F180050240FFF8011
-:109FA000001989C00238702131CD007F01CF6024B3
-:109FB00001BA50213C0B000CAF4C0028014B402152
-:109FC000950900D4950400D68E0700043131FFFFB7
-:109FD000AF8800D00E000922000721C08E060004C1
-:109FE0008F8300C8000629C0AF4500209064003E62
-:109FF00030820040144000068F8400D0341FFFFFE1
-:10A00000948300D63062FFFF145F0004000000005C
-:10A01000948400D60E0008B73084FFFF8E0500043C
-:10A02000022030218FBF00188FB100148FB00010B4
-:10A030002404002200003821000529C00A001285EE
-:10A0400027BD002027BDFFE0AFB100143091FFFF16
-:10A05000AFB00010AFBF00181220001D000080211B
-:10A060008F86001C8CC500002403000600053F02FB
-:10A070000005140230E4000714830015304500FF8A
-:10A080002CA800061100004D000558803C0C08006B
-:10A09000258C57E8016C50218D49000001200008F3
-:10A0A000000000008F8E00EC240D000111CD00593E
-:10A0B00000000000260B00013170FFFF24CA0020C1
-:10A0C0000211202B014030211480FFE6AF8A001CD2
-:10A0D000020010218FBF00188FB100148FB0001044
-:10A0E00003E0000827BD0020938700CE14E000386D
-:10A0F000240400140E001346000000008F86001C8C
-:10A10000240200010A00148DAF8200EC8F8900EC5C
-:10A11000240800021128003B240400130000282119
-:10A1200000003021240700010E001285000000000D
-:10A130000A00148D8F86001C8F8700EC2405000216
-:10A1400014E5FFF6240400120E0012F200000000D5
-:10A150008F8500E800403021240400120E00128593
-:10A16000000038210A00148D8F86001C8F8300ECBC
-:10A17000241F0003147FFFD0260B00010E0012A441
-:10A18000000000008F8500E800403021240200021A
-:10A190002404001000003821AF8200EC0E0012856C
-:10A1A000000000000A00148D8F86001C8F8F00ECC9
-:10A1B0002406000211E6000B000000002404001039
-:10A1C00000002821000030210A0014AA2407000101
-:10A1D000000028210E001285000030210A00148D95
-:10A1E0008F86001C0E0013B3000000001440001204
-:10A1F0008F99001C8F86001C240200030A00148D16
-:10A20000AF8200EC0E00143F000000000A00148D25
-:10A210008F86001C0E001294000000002402000231
-:10A2200024040014000028210000302100003821FF
-:10A230000A0014C7AF8200EC00403821240400104B
-:10A2400097380002000028210E0012853306FFFF18
-:10A250000A00148D8F86001C8F8400C83C077FFF86
-:10A2600034E6FFFF8C8500742402000100A6182448
-:10A27000AC83007403E00008A082000510A0003643
-:10A280002CA20080274A04003C0B00052409008012
-:10A29000104000072408008030A6000F00C54021B0
-:10A2A0002D0300811460000200A0482124080080D2
-:10A2B000AF4B003000000000000000000000000074
-:10A2C0001100000900003821014030218C8D000070
-:10A2D00024E7000400E8602BACCD000024840004D7
-:10A2E0001580FFFA24C600040000000000000000F2
-:10A2F000000000003C0E0006010E3825AF4700307C
-:10A300000000000000000000000000008F4F00006F
-:10A3100031E800101100FFFD000000008F42003CFA
-:10A320008F43003C0049C8210323C02B13000004C5
-:10A33000000000008F4C003825860001AF46003831
-:10A340008F47003C00A9282300E96821AF4D003C5D
-:10A3500014A0FFCE2CA2008003E000080000000043
-:10A3600027BDFFD03C020002AFB100143C11000C2D
-:10A37000AF450038AFB3001CAF46003C00809821C9
-:10A38000AF42003024050088AF440028035120214B
-:10A39000AFBF0028AFB50024AFB40020AFB20018A3
-:10A3A0000E0014FFAFB000103C1F08008FFF004CE0
-:10A3B0003C1808008F1800642410FF8003F3A821C4
-:10A3C00032B9007F02B078240018A0C0033A70218F
-:10A3D0000018914001D12021AF4F00280E0014FF3A
-:10A3E000025428213C0D08008DAD005024050120A9
-:10A3F00001B35821316C007F01705024019A48212B
-:10A40000013120210E0014FFAF4A00283C0808004B
-:10A410008D0800543C0508008CA500640113382108
-:10A4200030E6007F00F0182400DA2021009120217E
-:10A43000AF4300280E0014FF000529403C0208002D
-:10A440008C4200583C1008008E1000601200001C66
-:10A45000005388212415FF800A0015823C14000C4B
-:10A460003226007F0235182400DA202102402821FC
-:10A47000AF430028009420210E0014FF2610FFC0D7
-:10A480001200000F023288212E05004110A0FFF4B7
-:10A49000241210003226007F00109180023518240B
-:10A4A00000DA202102402821AF4300280094202117
-:10A4B0000E0014FF000080211600FFF302328821F5
-:10A4C0003C0B08008D6B005C240AFF802405000211
-:10A4D00001734021010A4824AF4900283C040800C8
-:10A4E000948400623110007F021A88213C07000C1E
-:10A4F0000E000CB90227982100402821026020217B
-:10A500008FBF00288FB500248FB400208FB3001CAC
-:10A510008FB200188FB100148FB000100A0014FF22
-:10A5200027BD00308F83001C8C62000410400003A4
-:10A530000000000003E00008000000008C64001030
-:0CA540008C6500080A0015388C66000CC1
-:04A54C00000000000B
-:10A550000000001B0000000F0000000A00000008BF
-:10A5600000000006000000050000000500000004D7
-:10A5700000000004000000030000000300000003CE
-:10A5800000000003000000030000000200000002C1
-:10A5900000000002000000020000000200000002B3
-:10A5A00000000002000000020000000200000002A3
-:10A5B0000000000200000002000000020000000293
-:10A5C0000000000200000001000000010000000186
-:10A5D00008000F3008000D8808000FC40800106C38
-:10A5E00008000F5808000F98080011A408000DA4D7
-:10A5F000080011C808000DF4080014980800144061
-:10A6000008000DA408000DA408000DA408001254B1
-:10A610000800125408000DA408000DA4080016E05C
-:10A6200008000DA408000DA408000DA408000DA446
-:10A63000080013D408000DA408000DA408000DA400
-:10A6400008000DA408000DA408000DA408000DA426
-:10A6500008000DA408000DA408000DA408000DA416
-:10A6600008000DA408000DA408000DA408000FB8F0
-:10A6700008000DA408000DA40800169008000DA401
-:10A6800008000DA408000DA408000DA408000DA4E6
-:10A6900008000DA408000DA408000DA408000DA4D6
-:10A6A00008000DA408000DA408000DA408000DA4C6
-:10A6B00008000DA408000DA408000DA408000DA4B6
-:10A6C000080015BC08000DA408000DA408001348DC
-:10A6D000080012B808002E5008002E5808002E203E
-:10A6E00008002E2C08002E3808002E440800532C99
-:10A6F000080052EC080052B80800528C080052685A
-:04A7000008005224D7
-:0CA704000A000C760000000000000000BD
-:10A710000000000D727870342E362E3136000000A5
-:10A72000040610030000000000000001000000000B
-:10A730000000000000000000000000000000000019
-:10A740000000000000000000000000000000000009
-:10A7500000000000000000000000000000000000F9
-:10A7600000000000000000000000000000000000E9
-:10A7700000000000000000000000000000000000D9
-:10A7800000000000000000000000000000000000C9
-:10A7900000000000000000000000000000000000B9
-:10A7A00000000000000000000000000000000000A9
-:10A7B0000000000000000000000000000000000099
-:10A7C0000000000000000000000000000000000089
-:10A7D0000000000000000000000000000000000079
-:10A7E0000000000000000000000000000000000069
-:10A7F0000000000000000000000000000000000059
-:10A800000000000000000000000000000000000048
-:10A810000000000000000000000000000000000038
-:10A820000000000000000000000000000000000028
-:10A830000000000000000000000000000000000018
-:10A840000000000000000000000000000000000008
-:10A8500000000000000000000000000000000000F8
-:10A8600000000000000000000000000000000000E8
-:10A8700000000000000000000000000000000000D8
-:10A8800000000000000000000000000000000000C8
-:10A8900000000000000000000000000000000000B8
-:10A8A00000000000000000000000000000000000A8
-:10A8B0000000000000000000000000000000000098
-:10A8C0000000000000000000000000000000000088
-:10A8D0000000000000000000000000000000000078
-:10A8E0000000000000000000000000000000000068
-:10A8F0000000000000000000000000000000000058
-:10A900000000000000000000000000000000000047
-:10A910000000000000000000000000000000000037
-:10A920000000000000000000000000000000000027
-:10A930000000000000000000000000000000000017
-:10A940000000000000000000000000000000000007
-:10A9500000000000000000000000000000000000F7
-:10A9600000000000000000000000000000000000E7
-:10A9700000000000000000000000000000000000D7
-:10A9800000000000000000000000000000000000C7
-:10A9900000000000000000000000000000000000B7
-:10A9A00000000000000000000000000000000000A7
-:10A9B0000000000000000000000000000000000097
-:10A9C0000000000000000000000000000000000087
-:10A9D0000000000000000000000000000000000077
-:10A9E0000000000000000000000000000000000067
-:10A9F0000000000000000000000000000000000057
-:10AA00000000000000000000000000000000000046
-:10AA10000000000000000000000000000000000036
-:10AA20000000000000000000000000000000000026
-:10AA30000000000000000000000000000000000016
-:10AA40000000000000000000000000000000000006
-:10AA500000000000000000000000000000000000F6
-:10AA600000000000000000000000000000000000E6
-:10AA700000000000000000000000000000000000D6
-:10AA800000000000000000000000000000000000C6
-:10AA900000000000000000000000000000000000B6
-:10AAA00000000000000000000000000000000000A6
-:10AAB0000000000000000000000000000000000096
-:10AAC0000000000000000000000000000000000086
-:10AAD0000000000000000000000000000000000076
-:10AAE0000000000000000000000000000000000066
-:10AAF0000000000000000000000000000000000056
-:10AB00000000000000000000000000000000000045
-:10AB10000000000000000000000000000000000035
-:10AB20000000000000000000000000000000000025
-:10AB30000000000000000000000000000000000015
-:10AB40000000000000000000000000000000000005
-:10AB500000000000000000000000000000000000F5
-:10AB600000000000000000000000000000000000E5
-:10AB700000000000000000000000000000000000D5
-:10AB800000000000000000000000000000000000C5
-:10AB900000000000000000000000000000000000B5
-:10ABA00000000000000000000000000000000000A5
-:10ABB0000000000000000000000000000000000095
-:10ABC0000000000000000000000000000000000085
-:10ABD0000000000000000000000000000000000075
-:10ABE0000000000000000000000000000000000065
-:10ABF0000000000000000000000000000000000055
-:10AC00000000000000000000000000000000000044
-:10AC10000000000000000000000000000000000034
-:10AC20000000000000000000000000000000000024
-:10AC30000000000000000000000000000000000014
-:10AC40000000000000000000000000000000000004
-:10AC500000000000000000000000000000000000F4
-:10AC600000000000000000000000000000000000E4
-:10AC700000000000000000000000000000000000D4
-:10AC800000000000000000000000000000000000C4
-:10AC900000000000000000000000000000000000B4
-:10ACA00000000000000000000000000000000000A4
-:10ACB0000000000000000000000000000000000094
-:10ACC0000000000000000000000000000000000084
-:10ACD0000000000000000000000000000000000074
-:10ACE0000000000000000000000000000000000064
-:10ACF0000000000000000000000000000000000054
-:10AD00000000000000000000000000000000000043
-:10AD10000000000000000000000000000000000033
-:10AD20000000000000000000000000000000000023
-:10AD30000000000000000000000000000000000013
-:10AD40000000000000000000000000000000000003
-:10AD500000000000000000000000000000000000F3
-:10AD600000000000000000000000000000000000E3
-:10AD700000000000000000000000000000000000D3
-:10AD800000000000000000000000000000000000C3
-:10AD900000000000000000000000000000000000B3
-:10ADA00000000000000000000000000000000000A3
-:10ADB0000000000000000000000000000000000093
-:10ADC0000000000000000000000000000000000083
-:10ADD0000000000000000000000000000000000073
-:10ADE0000000000000000000000000000000000063
-:10ADF0000000000000000000000000000000000053
-:10AE00000000000000000000000000000000000042
-:10AE10000000000000000000000000000000000032
-:10AE20000000000000000000000000000000000022
-:10AE30000000000000000000000000000000000012
-:10AE40000000000000000000000000000000000002
-:10AE500000000000000000000000000000000000F2
-:10AE600000000000000000000000000000000000E2
-:10AE700000000000000000000000000000000000D2
-:10AE800000000000000000000000000000000000C2
-:10AE900000000000000000000000000000000000B2
-:10AEA00000000000000000000000000000000000A2
-:10AEB0000000000000000000000000000000000092
-:10AEC0000000000000000000000000000000000082
-:10AED0000000000000000000000000000000000072
-:10AEE0000000000000000000000000000000000062
-:10AEF0000000000000000000000000000000000052
-:10AF00000000000000000000000000000000000041
-:10AF10000000000000000000000000000000000031
-:10AF20000000000000000000000000000000000021
-:10AF30000000000000000000000000000000000011
-:10AF40000000000000000000000000000000000001
-:10AF500000000000000000000000000000000000F1
-:10AF600000000000000000000000000000000000E1
-:10AF700000000000000000000000000000000000D1
-:10AF800000000000000000000000000000000000C1
-:10AF900000000000000000000000000000000000B1
-:10AFA00000000000000000000000000000000000A1
-:10AFB0000000000000000000000000000000000091
-:10AFC0000000000000000000000000000000000081
-:10AFD0000000000000000000000000000000000071
-:10AFE0000000000000000000000000000000000061
-:10AFF0000000000000000000000000000000000051
-:10B000000000000000000000000000000000000040
-:10B010000000000000000000000000000000000030
-:10B020000000000000000000000000000000000020
-:10B030000000000000000000000000000000000010
-:10B040000000000000000000000000000000000000
-:10B0500000000000000000000000000000000000F0
-:10B0600000000000000000000000000000000000E0
-:10B0700000000000000000000000000000000000D0
-:10B0800000000000000000000000000000000000C0
-:10B0900000000000000000000000000000000000B0
-:10B0A00000000000000000000000000000000000A0
-:10B0B0000000000000000000000000000000000090
-:10B0C0000000000000000000000000000000000080
-:10B0D0000000000000000000000000000000000070
-:10B0E0000000000000000000000000000000000060
-:10B0F0000000000000000000000000000000000050
-:10B10000000000000000000000000000000000003F
-:10B11000000000000000000000000000000000002F
-:10B12000000000000000000000000000000000001F
-:10B13000000000000000000000000000000000000F
-:10B1400000000000000000000000000000000000FF
-:10B1500000000000000000000000000000000000EF
-:10B1600000000000000000000000000000000000DF
-:10B1700000000000000000000000000000000000CF
-:10B1800000000000000000000000000000000000BF
-:10B1900000000000000000000000000000000000AF
-:10B1A000000000000000000000000000000000009F
-:10B1B000000000000000000000000000000000008F
-:10B1C000000000000000000000000000000000007F
-:10B1D000000000000000000000000000000000006F
-:10B1E000000000000000000000000000000000005F
-:10B1F000000000000000000000000000000000004F
-:10B20000000000000000000000000000000000003E
-:10B21000000000000000000000000000000000002E
-:10B22000000000000000000000000000000000001E
-:10B23000000000000000000000000000000000000E
-:10B2400000000000000000000000000000000000FE
-:10B2500000000000000000000000000000000000EE
-:10B2600000000000000000000000000000000000DE
-:10B2700000000000000000000000000000000000CE
-:10B2800000000000000000000000000000000000BE
-:10B2900000000000000000000000000000000000AE
-:10B2A000000000000000000000000000000000009E
-:10B2B000000000000000000000000000000000008E
-:10B2C000000000000000000000000000000000007E
-:10B2D000000000000000000000000000000000006E
-:10B2E000000000000000000000000000000000005E
-:10B2F000000000000000000000000000000000004E
-:10B30000000000000000000000000000000000003D
-:10B31000000000000000000000000000000000002D
-:10B32000000000000000000000000000000000001D
-:10B33000000000000000000000000000000000000D
-:10B3400000000000000000000000000000000000FD
-:10B3500000000000000000000000000000000000ED
-:10B3600000000000000000000000000000000000DD
-:10B3700000000000000000000000000000000000CD
-:10B3800000000000000000000000000000000000BD
-:10B3900000000000000000000000000000000000AD
-:10B3A000000000000000000000000000000000009D
-:10B3B000000000000000000000000000000000008D
-:10B3C000000000000000000000000000000000007D
-:10B3D000000000000000000000000000000000006D
-:10B3E000000000000000000000000000000000005D
-:10B3F000000000000000000000000000000000004D
-:10B40000000000000000000000000000000000003C
-:10B41000000000000000000000000000000000002C
-:10B42000000000000000000000000000000000001C
-:10B43000000000000000000000000000000000000C
-:10B4400000000000000000000000000000000000FC
-:10B4500000000000000000000000000000000000EC
-:10B4600000000000000000000000000000000000DC
-:10B4700000000000000000000000000000000000CC
-:10B4800000000000000000000000000000000000BC
-:10B4900000000000000000000000000000000000AC
-:10B4A000000000000000000000000000000000009C
-:10B4B000000000000000000000000000000000008C
-:10B4C000000000000000000000000000000000007C
-:10B4D000000000000000000000000000000000006C
-:10B4E000000000000000000000000000000000005C
-:10B4F000000000000000000000000000000000004C
-:10B50000000000000000000000000000000000003B
-:10B51000000000000000000000000000000000002B
-:10B52000000000000000000000000000000000001B
-:10B53000000000000000000000000000000000000B
-:10B5400000000000000000000000000000000000FB
-:10B5500000000000000000000000000000000000EB
-:10B5600000000000000000000000000000000000DB
-:10B5700000000000000000000000000000000000CB
-:10B5800000000000000000000000000000000000BB
-:10B5900000000000000000000000000000000000AB
-:10B5A000000000000000000000000000000000009B
-:10B5B000000000000000000000000000000000008B
-:10B5C000000000000000000000000000000000007B
-:10B5D000000000000000000000000000000000006B
-:10B5E000000000000000000000000000000000005B
-:10B5F000000000000000000000000000000000004B
-:10B60000000000000000000000000000000000003A
-:10B61000000000000000000000000000000000002A
-:10B62000000000000000000000000000000000001A
-:10B63000000000000000000000000000000000000A
-:10B6400000000000000000000000000000000000FA
-:10B6500000000000000000000000000000000000EA
-:10B6600000000000000000000000000000000000DA
-:10B6700000000000000000000000000000000000CA
-:10B6800000000000000000000000000000000000BA
-:10B6900000000000000000000000000000000000AA
-:10B6A000000000000000000000000000000000009A
-:10B6B000000000000000000000000000000000008A
-:10B6C000000000000000000000000000000000007A
-:10B6D000000000000000000000000000000000006A
-:10B6E000000000000000000000000000000000005A
-:10B6F000000000000000000000000000000000004A
-:10B700000000000000000000000000000000000039
-:10B710000000000000000000000000000000000029
-:10B720000000000000000000000000000000000019
-:10B730000000000000000000000000000000000009
-:10B7400000000000000000000000000000000000F9
-:10B7500000000000000000000000000000000000E9
-:10B7600000000000000000000000000000000000D9
-:10B7700000000000000000000000000000000000C9
-:10B7800000000000000000000000000000000000B9
-:10B7900000000000000000000000000000000000A9
-:10B7A0000000000000000000000000000000000099
-:10B7B0000000000000000000000000000000000089
-:10B7C0000000000000000000000000000000000079
-:10B7D0000000000000000000000000000000000069
-:10B7E0000000000000000000000000000000000059
-:10B7F0000000000000000000000000000000000049
-:10B800000000000000000000000000000000000038
-:10B810000000000000000000000000000000000028
-:10B820000000000000000000000000000000000018
-:10B830000000000000000000000000000000000008
-:10B8400000000000000000000000000000000000F8
-:10B8500000000000000000000000000000000000E8
-:10B8600000000000000000000000000000000000D8
-:10B8700000000000000000000000000000000000C8
-:10B8800000000000000000000000000000000000B8
-:10B8900000000000000000000000000000000000A8
-:10B8A0000000000000000000000000000000000098
-:10B8B0000000000000000000000000000000000088
-:10B8C0000000000000000000000000000000000078
-:10B8D0000000000000000000000000000000000068
-:10B8E0000000000000000000000000000000000058
-:10B8F0000000000000000000000000000000000048
-:10B900000000000000000000000000000000000037
-:10B910000000000000000000000000000000000027
-:10B920000000000000000000000000000000000017
-:10B930000000000000000000000000000000000007
-:10B9400000000000000000000000000000000000F7
-:10B9500000000000000000000000000000000000E7
-:10B9600000000000000000000000000000000000D7
-:10B9700000000000000000000000000000000000C7
-:10B9800000000000000000000000000000000000B7
-:10B9900000000000000000000000000000000000A7
-:10B9A0000000000000000000000000000000000097
-:10B9B0000000000000000000000000000000000087
-:10B9C0000000000000000000000000000000000077
-:10B9D0000000000000000000000000000000000067
-:10B9E0000000000000000000000000000000000057
-:10B9F0000000000000000000000000000000000047
-:10BA00000000000000000000000000000000000036
-:10BA10000000000000000000000000000000000026
-:10BA20000000000000000000000000000000000016
-:10BA30000000000000000000000000000000000006
-:10BA400000000000000000000000000000000000F6
-:10BA500000000000000000000000000000000000E6
-:10BA600000000000000000000000000000000000D6
-:10BA700000000000000000000000000000000000C6
-:10BA800000000000000000000000000000000000B6
-:10BA900000000000000000000000000000000000A6
-:10BAA0000000000000000000000000000000000096
-:10BAB0000000000000000000000000000000000086
-:10BAC0000000000000000000000000000000000076
-:10BAD0000000000000000000000000000000000066
-:10BAE0000000000000000000000000000000000056
-:10BAF0000000000000000000000000000000000046
-:10BB00000000000000000000000000000000000035
-:10BB10000000000000000000000000000000000025
-:10BB20000000000000000000000000000000000015
-:10BB30000000000000000000000000000000000005
-:10BB400000000000000000000000000000000000F5
-:10BB500000000000000000000000000000000000E5
-:10BB600000000000000000000000000000000000D5
-:10BB700000000000000000000000000000000000C5
-:10BB800000000000000000000000000000000000B5
-:10BB900000000000000000000000000000000000A5
-:10BBA0000000000000000000000000000000000095
-:10BBB0000000000000000000000000000000000085
-:10BBC0000000000000000000000000000000000075
-:10BBD0000000000000000000000000000000000065
-:10BBE0000000000000000000000000000000000055
-:10BBF0000000000000000000000000000000000045
-:10BC00000000000000000000000000000000000034
-:10BC10000000000000000000000000000000000024
-:10BC20000000000000000000000000000000000014
-:10BC30000000000000000000000000000000000004
-:10BC400000000000000000000000000000000000F4
-:10BC500000000000000000000000000000000000E4
-:10BC600000000000000000000000000000000000D4
-:10BC700000000000000000000000000000000000C4
-:10BC800000000000000000000000000000000000B4
-:10BC900000000000000000000000000000000000A4
-:10BCA0000000000000000000000000000000000094
-:10BCB0000000000000000000000000000000000084
-:10BCC0000000000000000000000000000000000074
-:10BCD0000000000000000000000000000000000064
-:10BCE0000000000000000000000000000000000054
-:10BCF0000000000000000000000000000000000044
-:10BD00000000000000000000000000000000000033
-:10BD10000000000000000000000000000000000023
-:10BD20000000000000000000000000000000000013
-:10BD30000000000000000000000000000000000003
-:10BD400000000000000000000000000000000000F3
-:10BD500000000000000000000000000000000000E3
-:10BD600000000000000000000000000000000000D3
-:10BD700000000000000000000000000000000000C3
-:10BD800000000000000000000000000000000000B3
-:10BD900000000000000000000000000000000000A3
-:10BDA0000000000000000000000000000000000093
-:10BDB0000000000000000000000000000000000083
-:10BDC0000000000000000000000000000000000073
-:10BDD0000000000000000000000000000000000063
-:10BDE0000000000000000000000000000000000053
-:10BDF0000000000000000000000000000000000043
-:10BE00000000000000000000000000000000000032
-:10BE10000000000000000000000000000000000022
-:10BE20000000000000000000000000000000000012
-:10BE30000000000000000000000000000000000002
-:10BE400000000000000000000000000000000000F2
-:10BE500000000000000000000000000000000000E2
-:10BE600000000000000000000000000000000000D2
-:10BE700000000000000000000000000000000000C2
-:10BE800000000000000000000000000000000000B2
-:10BE900000000000000000000000000000000000A2
-:10BEA0000000000000000000000000000000000092
-:10BEB0000000000000000000000000000000000082
-:10BEC0000000000000000000000000000000000072
-:10BED0000000000000000000000000000000000062
-:10BEE0000000000000000000000000000000000052
-:10BEF0000000000000000000000000000000000042
-:10BF00000000000000000000000000000000000031
-:10BF10000000000000000000000000000000000021
-:10BF20000000000000000000000000000000000011
-:10BF30000000000000000000000000000000000001
-:10BF400000000000000000000000000000000000F1
-:10BF500000000000000000000000000000000000E1
-:10BF600000000000000000000000000000000000D1
-:10BF700000000000000000000000000000000000C1
-:10BF800000000000000000000000000000000000B1
-:10BF900000000000000000000000000000000000A1
-:10BFA0000000000000000000000000000000000091
-:10BFB0000000000000000000000000000000000081
-:10BFC0000000000000000000000000000000000071
-:10BFD0000000000000000000000000000000000061
-:10BFE0000000000000000000000000000000000051
-:10BFF0000000000000000000000000000000000041
-:10C000000000000000000000000000000000000030
-:10C010000000000000000000000000000000000020
-:10C020000000000000000000000000000000000010
-:10C030000000000000000000000000000000000000
-:10C0400000000000000000000000000000000000F0
-:10C0500000000000000000000000000000000000E0
-:10C0600000000000000000000000000000000000D0
-:10C0700000000000000000000000000000000000C0
-:10C0800000000000000000000000000000000000B0
-:10C0900000000000000000000000000000000000A0
-:10C0A0000000000000000000000000000000000090
-:10C0B0000000000000000000000000000000000080
-:10C0C0000000000000000000000000000000000070
-:10C0D0000000000000000000000000000000000060
-:10C0E0000000000000000000000000000000000050
-:10C0F0000000000000000000000000000000000040
-:10C10000000000000000000000000000000000002F
-:10C11000000000000000000000000000000000001F
-:10C12000000000000000000000000000000000000F
-:10C1300000000000000000000000000000000000FF
-:10C1400000000000000000000000000000000000EF
-:10C1500000000000000000000000000000000000DF
-:10C1600000000000000000000000000000000000CF
-:10C1700000000000000000000000000000000000BF
-:10C1800000000000000000000000000000000000AF
-:10C19000000000000000000000000000000000009F
-:10C1A000000000000000000000000000000000008F
-:10C1B000000000000000000000000000000000007F
-:10C1C000000000000000000000000000000000006F
-:10C1D000000000000000000000000000000000005F
-:10C1E000000000000000000000000000000000004F
-:10C1F000000000000000000000000000000000003F
-:10C20000000000000000000000000000000000002E
-:10C21000000000000000000000000000000000001E
-:10C22000000000000000000000000000000000000E
-:10C2300000000000000000000000000000000000FE
-:10C2400000000000000000000000000000000000EE
-:10C2500000000000000000000000000000000000DE
-:10C2600000000000000000000000000000000000CE
-:10C2700000000000000000000000000000000000BE
-:10C2800000000000000000000000000000000000AE
-:10C29000000000000000000000000000000000009E
-:10C2A000000000000000000000000000000000008E
-:10C2B000000000000000000000000000000000007E
-:10C2C000000000000000000000000000000000006E
-:10C2D000000000000000000000000000000000005E
-:10C2E000000000000000000000000000000000004E
-:10C2F000000000000000000000000000000000003E
-:10C30000000000000000000000000000000000002D
-:10C31000000000000000000000000000000000001D
-:10C32000000000000000000000000000000000000D
-:10C3300000000000000000000000000000000000FD
-:10C3400000000000000000000000000000000000ED
-:10C3500000000000000000000000000000000000DD
-:10C3600000000000000000000000000000000000CD
-:10C3700000000000000000000000000000000000BD
-:10C3800000000000000000000000000000000000AD
-:10C39000000000000000000000000000000000009D
-:10C3A000000000000000000000000000000000008D
-:10C3B000000000000000000000000000000000007D
-:10C3C000000000000000000000000000000000006D
-:10C3D000000000000000000000000000000000005D
-:10C3E000000000000000000000000000000000004D
-:10C3F000000000000000000000000000000000003D
-:10C40000000000000000000000000000000000002C
-:10C41000000000000000000000000000000000001C
-:10C42000000000000000000000000000000000000C
-:10C4300000000000000000000000000000000000FC
-:10C4400000000000000000000000000000000000EC
-:10C4500000000000000000000000000000000000DC
-:10C4600000000000000000000000000000000000CC
-:10C4700000000000000000000000000000000000BC
-:10C4800000000000000000000000000000000000AC
-:10C49000000000000000000000000000000000009C
-:10C4A000000000000000000000000000000000008C
-:10C4B000000000000000000000000000000000007C
-:10C4C000000000000000000000000000000000006C
-:10C4D000000000000000000000000000000000005C
-:10C4E000000000000000000000000000000000004C
-:10C4F000000000000000000000000000000000003C
-:10C50000000000000000000000000000000000002B
-:10C51000000000000000000000000000000000001B
-:10C52000000000000000000000000000000000000B
-:10C5300000000000000000000000000000000000FB
-:10C5400000000000000000000000000000000000EB
-:10C5500000000000000000000000000000000000DB
-:10C5600000000000000000000000000000000000CB
-:10C5700000000000000000000000000000000000BB
-:10C5800000000000000000000000000000000000AB
-:10C59000000000000000000000000000000000009B
-:10C5A000000000000000000000000000000000008B
-:10C5B000000000000000000000000000000000007B
-:10C5C000000000000000000000000000000000006B
-:10C5D000000000000000000000000000000000005B
-:10C5E000000000000000000000000000000000004B
-:10C5F000000000000000000000000000000000003B
-:10C60000000000000000000000000000000000002A
-:10C61000000000000000000000000000000000001A
-:10C62000000000000000000000000000000000000A
-:10C6300000000000000000000000000000000000FA
-:10C6400000000000000000000000000000000000EA
-:10C6500000000000000000000000000000000000DA
-:10C6600000000000000000000000000000000000CA
-:10C6700000000000000000000000000000000000BA
-:10C6800000000000000000000000000000000000AA
-:10C69000000000000000000000000000000000009A
-:10C6A000000000000000000000000000000000008A
-:10C6B000000000000000000000000000000000007A
-:10C6C000000000000000000000000000000000006A
-:10C6D000000000000000000000000000000000005A
-:10C6E000000000000000000000000000000000004A
-:10C6F000000000000000000000000000000000003A
-:10C700000000000000000000000000000000000029
-:10C710000000000000000000000000000000000019
-:10C720000000000000000000000000000000000009
-:10C7300000000000000000000000000000000000F9
-:10C7400000000000000000000000000000000000E9
-:10C7500000000000000000000000000000000000D9
-:10C7600000000000000000000000000000000000C9
-:10C7700000000000000000000000000000000000B9
-:10C7800000000000000000000000000000000000A9
-:10C790000000000000000000000000000000000099
-:10C7A0000000000000000000000000000000000089
-:10C7B0000000000000000000000000000000000079
-:10C7C0000000000000000000000000000000000069
-:10C7D0000000000000000000000000000000000059
-:10C7E0000000000000000000000000000000000049
-:10C7F0000000000000000000000000000000000039
-:10C800000000000000000000000000000000000028
-:10C810000000000000000000000000000000000018
-:10C820000000000000000000000000000000000008
-:10C8300000000000000000000000000000000000F8
-:10C8400000000000000000000000000000000000E8
-:10C8500000000000000000000000000000000000D8
-:10C8600000000000000000000000000000000000C8
-:10C8700000000000000000000000000000000000B8
-:10C8800000000000000000000000000000000000A8
-:10C890000000000000000000000000000000000098
-:10C8A0000000000000000000000000000000000088
-:10C8B0000000000000000000000000000000000078
-:10C8C0000000000000000000000000000000000068
-:10C8D0000000000000000000000000000000000058
-:10C8E0000000000000000000000000000000000048
-:10C8F0000000000000000000000000000000000038
-:10C900000000000000000000000000000000000027
-:10C910000000000000000000000000000000000017
-:10C920000000000000000000000000000000000007
-:10C9300000000000000000000000000000000000F7
-:10C9400000000000000000000000000000000000E7
-:10C9500000000000000000000000000000000000D7
-:10C9600000000000000000000000000000000000C7
-:10C9700000000000000000000000000000000000B7
-:10C9800000000000000000000000000000000000A7
-:10C990000000000000000000000000000000000097
-:10C9A0000000000000000000000000000000000087
-:10C9B0000000000000000000000000000000000077
-:10C9C0000000000000000000000000000000000067
-:10C9D0000000000000000000000000000000000057
-:10C9E0000000000000000000000000000000000047
-:10C9F0000000000000000000000000000000000037
-:10CA00000000000000000000000000000000000026
-:10CA10000000000000000000000000000000000016
-:10CA20000000000000000000000000000000000006
-:10CA300000000000000000000000000000000000F6
-:10CA400000000000000000000000000000000000E6
-:10CA500000000000000000000000000000000000D6
-:10CA600000000000000000000000000000000000C6
-:10CA700000000000000000000000000000000000B6
-:10CA800000000000000000000000000000000000A6
-:10CA90000000000000000000000000000000000096
-:10CAA0000000000000000000000000000000000086
-:10CAB0000000000000000000000000000000000076
-:10CAC0000000000000000000000000000000000066
-:10CAD0000000000000000000000000000000000056
-:10CAE0000000000000000000000000000000000046
-:10CAF0000000000000000000000000000000000036
-:10CB00000000000000000000000000000000000025
-:10CB10000000000000000000000000000000000015
-:10CB20000000000000000000000000000000000005
-:10CB300000000000000000000000000000000000F5
-:10CB400000000000000000000000000000000000E5
-:10CB500000000000000000000000000000000000D5
-:10CB600000000000000000000000000000000000C5
-:10CB700000000000000000000000000000000000B5
-:10CB800000000000000000000000000000000000A5
-:10CB90000000000000000000000000000000000095
-:10CBA0000000000000000000000000000000000085
-:10CBB0000000000000000000000000000000000075
-:10CBC0000000000000000000000000000000000065
-:10CBD0000000000000000000000000000000000055
-:10CBE0000000000000000000000000000000000045
-:10CBF0000000000000000000000000000000000035
-:10CC00000000000000000000000000000000000024
-:10CC10000000000000000000000000000000000014
-:10CC20000000000000000000000000000000000004
-:10CC300000000000000000000000000000000000F4
-:10CC400000000000000000000000000000000000E4
-:10CC500000000000000000000000000000000000D4
-:10CC600000000000000000000000000000000000C4
-:10CC700000000000000000000000000000000000B4
-:10CC800000000000000000000000000000000000A4
-:10CC90000000000000000000000000000000000094
-:10CCA0000000000000000000000000000000000084
-:10CCB0000000000000000000000000000000000074
-:10CCC0000000000000000000000000000000000064
-:10CCD0000000000000000000000000000000000054
-:10CCE0000000000000000000000000000000000044
-:10CCF0000000000000000000000000000000000034
-:10CD00000000000000000000000000000000000023
-:10CD10000000000000000000000000000000000013
-:10CD20000000000000000000000000000000000003
-:10CD300000000000000000000000000000000000F3
-:10CD400000000000000000000000000000000000E3
-:10CD500000000000000000000000000000000000D3
-:10CD600000000000000000000000000000000000C3
-:10CD700000000000000000000000000000000000B3
-:10CD800000000000000000000000000000000000A3
-:10CD90000000000000000000000000000000000093
-:10CDA0000000000000000000000000000000000083
-:10CDB0000000000000000000000000000000000073
-:10CDC0000000000000000000000000000000000063
-:10CDD0000000000000000000000000000000000053
-:10CDE0000000000000000000000000000000000043
-:10CDF0000000000000000000000000000000000033
-:10CE00000000000000000000000000000000000022
-:10CE10000000000000000000000000000000000012
-:10CE20000000000000000000000000000000000002
-:10CE300000000000000000000000000000000000F2
-:10CE400000000000000000000000000000000000E2
-:10CE500000000000000000000000000000000000D2
-:10CE600000000000000000000000000000000000C2
-:10CE700000000000000000000000000000000000B2
-:10CE800000000000000000000000000000000000A2
-:10CE90000000000000000000000000000000000092
-:10CEA0000000000000000000000000000000000082
-:10CEB0000000000000000000000000000000000072
-:10CEC0000000000000000000000000000000000062
-:10CED0000000000000000000000000000000000052
-:10CEE0000000000000000000000000000000000042
-:10CEF0000000000000000000000000000000000032
-:10CF00000000000000000000000000000000000021
-:10CF10000000000000000000000000000000000011
-:10CF20000000000000000000000000000000000001
-:10CF300000000000000000000000000000000000F1
-:10CF400000000000000000000000000000000000E1
-:10CF500000000000000000000000000000000000D1
-:10CF600000000000000000000000000000000000C1
-:10CF700000000000000000000000000000000000B1
-:10CF800000000000000000000000000000000000A1
-:10CF90000000000000000000000000000000000091
-:10CFA0000000000000000000000000000000000081
-:10CFB0000000000000000000000000000000000071
-:10CFC0000000000000000000000000000000000061
-:10CFD0000000000000000000000000000000000051
-:10CFE0000000000000000000000000000000000041
-:10CFF0000000000000000000000000000000000031
-:10D000000000000000000000000000000000000020
-:10D010000000000000000000000000000000000010
-:10D020000000000000000000000000000000000000
-:10D0300000000000000000000000000000000000F0
-:10D0400000000000000000000000000000000000E0
-:10D0500000000000000000000000000000000000D0
-:10D0600000000000000000000000000000000000C0
-:10D0700000000000000000000000000000000000B0
-:10D0800000000000000000000000000000000000A0
-:10D090000000000000000000000000000000000090
-:10D0A0000000000000000000000000000000000080
-:10D0B0000000000000000000000000000000000070
-:10D0C0000000000000000000000000000000000060
-:10D0D0000000000000000000000000000000000050
-:10D0E0000000000000000000000000000000000040
-:10D0F0000000000000000000000000000000000030
-:10D10000000000000000000000000000000000001F
-:10D11000000000000000000000000000000000000F
-:10D1200000000000000000000000000000000000FF
-:10D1300000000000000000000000000000000000EF
-:10D1400000000000000000000000000000000000DF
-:10D1500000000000000000000000000000000000CF
-:10D1600000000000000000000000000000000000BF
-:10D1700000000000000000000000000000000000AF
-:10D18000000000000000000000000000000000009F
-:10D19000000000000000000000000000000000008F
-:10D1A000000000000000000000000000000000007F
-:10D1B000000000000000000000000000000000006F
-:10D1C000000000000000000000000000000000005F
-:10D1D000000000000000000000000000000000004F
-:10D1E000000000000000000000000000000000003F
-:10D1F000000000000000000000000000000000002F
-:10D20000000000000000000000000000000000001E
-:10D21000000000000000000000000000000000000E
-:10D2200000000000000000000000000000000000FE
-:10D2300000000000000000000000000000000000EE
-:10D2400000000000000000000000000000000000DE
-:10D2500000000000000000000000000000000000CE
-:10D2600000000000000000000000000000000000BE
-:10D2700000000000000000000000000000000000AE
-:10D28000000000000000000000000000000000009E
-:10D29000000000000000000000000000000000008E
-:10D2A000000000000000000000000000000000007E
-:10D2B000000000000000000000000000000000006E
-:10D2C000000000000000000000000000000000005E
-:10D2D000000000000000000000000000000000004E
-:10D2E000000000000000000000000000000000003E
-:10D2F000000000000000000000000000000000002E
-:10D30000000000000000000000000000000000001D
-:10D31000000000000000000000000000000000000D
-:10D3200000000000000000000000000000000000FD
-:10D3300000000000000000000000000000000000ED
-:10D3400000000000000000000000000000000000DD
-:10D3500000000000000000000000000000000000CD
-:10D3600000000000000000000000000000000000BD
-:10D3700000000000000000000000000000000000AD
-:10D38000000000000000000000000000000000009D
-:10D39000000000000000000000000000000000008D
-:10D3A000000000000000000000000000000000007D
-:10D3B000000000000000000000000000000000006D
-:10D3C000000000000000000000000000000000005D
-:10D3D000000000000000000000000000000000004D
-:10D3E000000000000000000000000000000000003D
-:10D3F000000000000000000000000000000000002D
-:10D40000000000000000000000000000000000001C
-:10D41000000000000000000000000000000000000C
-:10D4200000000000000000000000000000000000FC
-:10D4300000000000000000000000000000000000EC
-:10D4400000000000000000000000000000000000DC
-:10D4500000000000000000000000000000000000CC
-:10D4600000000000000000000000000000000000BC
-:10D4700000000000000000000000000000000000AC
-:10D48000000000000000000000000000000000009C
-:10D49000000000000000000000000000000000008C
-:10D4A000000000000000000000000000000000007C
-:10D4B000000000000000000000000000000000006C
-:10D4C000000000000000000000000000000000005C
-:10D4D000000000000000000000000000000000004C
-:10D4E000000000000000000000000000000000003C
-:10D4F000000000000000000000000000000000002C
-:10D50000000000000000000000000000000000001B
-:10D51000000000000000000000000000000000000B
-:10D5200000000000000000000000000000000000FB
-:10D5300000000000000000000000000000000000EB
-:10D5400000000000000000000000000000000000DB
-:10D5500000000000000000000000000000000000CB
-:10D5600000000000000000000000000000000000BB
-:10D5700000000000000000000000000000000000AB
-:10D58000000000000000000000000000000000009B
-:10D59000000000000000000000000000000000008B
-:10D5A000000000000000000000000000000000007B
-:10D5B000000000000000000000000000000000006B
-:10D5C000000000000000000000000000000000005B
-:10D5D000000000000000000000000000000000004B
-:10D5E000000000000000000000000000000000003B
-:10D5F000000000000000000000000000000000002B
-:10D60000000000000000000000000000000000001A
-:10D61000000000000000000000000000000000000A
-:10D6200000000000000000000000000000000000FA
-:10D6300000000000000000000000000000000000EA
-:10D6400000000000000000000000000000000000DA
-:10D6500000000000000000000000000000000000CA
-:10D6600000000000000000000000000000000000BA
-:10D6700000000000000000000000000000000000AA
-:10D68000000000000000000000000000000000009A
-:10D69000000000000000000000000000000000008A
-:10D6A000000000000000000000000000000000007A
-:10D6B000000000000000000000000000000000006A
-:10D6C000000000000000000000000000000000005A
-:10D6D000000000000000000000000000000000004A
-:10D6E000000000000000000000000000000000003A
-:10D6F000000000000000000000000000000000002A
-:10D700000000000000000000000000000000000019
-:10D710000000000000000000000000000000000009
-:10D7200000000000000000000000000000000000F9
-:10D7300000000000000000000000000000000000E9
-:10D7400000000000000000000000000000000000D9
-:10D7500000000000000000000000000000000000C9
-:10D7600000000000000000000000000000000000B9
-:10D7700000000000000000000000000000000000A9
-:10D780000000000000000000000000000000000099
-:10D790000000000000000000000000000000000089
-:10D7A0000000000000000000000000000000000079
-:10D7B0000000000000000000000000000000000069
-:10D7C0000000000000000000000000000000000059
-:10D7D0000000000000000000000000000000000049
-:10D7E0000000000000000000000000000000000039
-:10D7F0000000000000000000000000000000000029
-:10D800000000000000000000000000000000000018
-:10D810000000000000000000000000000000000008
-:10D8200000000000000000000000000000000000F8
-:10D8300000000000000000000000000000000000E8
-:10D8400000000000000000000000000000000000D8
-:10D8500000000000000000000000000000000000C8
-:10D8600000000000000000000000000000000000B8
-:10D8700000000000000000000000000000000000A8
-:10D880000000000000000000000000000000000098
-:10D890000000000000000000000000000000000088
-:10D8A0000000000000000000000000000000000078
-:10D8B0000000000000000000000000000000000068
-:10D8C0000000000000000000000000000000000058
-:10D8D0000000000000000000000000000000000048
-:10D8E00010000003000000000000000D0000000D0B
-:10D8F0003C020800244271203C030800246375C8E0
-:10D90000AC4000000043202B1480FFFD24420004A3
-:10D910003C1D080037BD7FFC03A0F0213C1008002F
-:10D92000261031D83C1C0800279C71200E00116481
-:10D93000000000000000000D30A5FFFF30C600FF12
-:10D94000274301808F4201B80440FFFE24020002F9
-:10D95000AC640000A4650008A066000AA062000B89
-:10D960003C021000AC67001803E00008AF4201B8A9
-:10D970003C0360008C624FF80440FFFE3C02020052
-:10D98000AC644FC0AC624FC43C02100003E000081E
-:10D99000AC624FF827BDFFE8AFBF0014AFB0001076
-:10D9A0000E0011B300808021936200052403FFFE66
-:10D9B00002002021004310248FBF00148FB00010FC
-:10D9C000A36200050A0011BC27BD001827BDFFE8AF
-:10D9D000AFB00010AFBF00140E000EA40080802175
-:10D9E0009362000024030050304200FF14430004FF
-:10D9F00024020100AF4201800A000CC10200202174
-:10DA0000AF400180020020218FBF00148FB00010B2
-:10DA10000A000F7D27BD001827BDFF98AFBE00602C
-:10DA2000AFB7005CAFB20048AFBF0064AFB60058FC
-:10DA3000AFB50054AFB40050AFB3004CAFB1004429
-:10DA4000AFB000408F5001289363003F9362000500
-:10DA50000000F021307200FF000210273042000168
-:10DA60000000B82114400066AFA0003893420116B0
-:10DA700093430112304200FF306300FF0342202134
-:10DA800003431021244540008F82000010400018FD
-:10DA9000248840008F4201043C030001004310240D
-:10DAA00010400013000000008CA3000C8F620030B7
-:10DAB000146201A2240200018CA300108F62002CCA
-:10DAC0001462019E240200019762003A9483400090
-:10DAD0003042FFFF1462019924020001976200386E
-:10DAE000950300023042FFFF1462019424020001FA
-:10DAF00093620000304300FF240200201062000502
-:10DB00002402005010620006000000000A000D0B05
-:10DB1000000000000000000D0A000D14AFA000304E
-:10DB20003C1E080027DE71880A000D14AFA00030EB
-:10DB30003C0208008C4200DC244200013C01080049
-:10DB4000AC2200DC0E00127D000000000A000E8FE7
-:10DB50008FBF00648F4201043C0300209113000D2D
-:10DB6000004310240002202B00042140AFA4003009
-:10DB70008F4301043C02004000621824146000023C
-:10DB8000348700400080382132620020AFA7003087
-:10DB90001440000234E6008000E0302110C0000B89
-:10DBA000AFA6003093C500088F67004C020020210B
-:10DBB00000052B0034A5008130A5F0810E000C8DEE
-:10DBC00030C600FF0A000E8C000000009362003E89
-:10DBD000304200401040000E24020004564200066D
-:10DBE00024020012020020210E0013DA010030216D
-:10DBF0000A000E8F8FBF006416420005000000006F
-:10DC00000E000CB2000020210A000E8F8FBF0064AE
-:10DC10009742011A9504000E9363003532650004A3
-:10DC20003055FFFF00642004AFA4003C8D110004B8
-:10DC300010A000158D1400089362003E3042004091
-:10DC400010400007000000000E00133B02202021BE
-:10DC50001040000D000000000A000E8C00000000C3
-:10DC60008F620044022210230440013200000000B1
-:10DC70008F620048022210230441012E2404001662
-:10DC80000A000DA28FC200048F62004802221023F6
-:10DC900004400008000000003C0208008C423100F3
-:10DCA000244200013C010800AC2231000A000E8130
-:10DCB000000000008F62004002221023184000097B
-:10DCC0002402000C3C0208008C423100327300FC3C
-:10DCD0000000A821244200013C010800AC223100D0
-:10DCE0002402000CAFA200308F62004000511823C4
-:10DCF0001860000D02A3102A144001030000000068
-:10DD00001475000602A310233A620001304200019C
-:10DD1000144000FD0000000002A31023022388210C
-:10DD20000A000D8A3055FFFF000018213262000200
-:10DD30001040001A326200109362003E30420040F0
-:10DD4000504000118FC200040E0011B302002021C8
-:10DD500024020018A362003F936200052403FFFE23
-:10DD600002002021004310240E0011BCA362000514
-:10DD700024040039000028210E0013242406001872
-:10DD80000A000E8E24020001240400170040F80946
-:10DD9000000000000A000E8E24020001104000E581
-:10DDA000000000008F64004C8F6200540282102338
-:10DDB0001C4000E002841023044200010080A021E6
-:10DDC000AFA30018AFB10010AFB50014934201200B
-:10DDD0008F6600409764003C304200FF03422821D8
-:10DDE0008FA2003C00A328218FA300303084FFFFC6
-:10DDF0000044202B8FC200000064182524A5400099
-:10DE0000AFA50020AFA60028AFA30030AFA6002426
-:10DE1000AFA0002CAFB400340040F80927A40010D4
-:10DE20008FA200303042000254400001327300FEE5
-:10DE30009362003E30420040104000378FA3001430
-:10DE40008F6200541682001A32620001240200140C
-:10DE5000124200102A42001510400006240200164B
-:10DE60002402000C12420007326200010A000DEB8E
-:10DE70000000000012420005326200010A000DEBB2
-:10DE8000000000000A000DE62417000E0A000DE64F
-:10DE9000241700100A000DEA2417001293620023D1
-:10DEA0002403FFBD00431024A3620023326200015B
-:10DEB000104000198FA300142402000C1242000E1F
-:10DEC0002A42000D104000062402000E2402000A1F
-:10DED000124200078FA200240A000E032442000110
-:10DEE000124200088FA200240A000E0324420001FF
-:10DEF0000A000E01241700082402000E16E2000298
-:10DF000024170016241700108FA2002424420001B9
-:10DF1000AFA200248FA300148FA200248F760040AC
-:10DF200000431021AF6200408FA2003C9364003692
-:10DF30008F630040028290213402FFFF00821004B0
-:10DF400000621821AF6300488FA6003030C200087D
-:10DF50001040000E000000008F62005816420004BE
-:10DF600030C600FF9742011A5040000134C600102D
-:10DF700093C500088FA700340200202100052B0064
-:10DF800034A500800E000C8D30A5F0808F6200401B
-:10DF900000561023184000178FA200183C020800FA
-:10DFA0008C423198304200101040000924020001D8
-:10DFB000976200681440000624020001A76200680E
-:10DFC0009742007A2442000A0A000E47A762001214
-:10DFD000A76200120E0011B3020020219362007D9F
-:10DFE0002403000102002021344200010A000E45F2
-:10DFF000AFA300381840000A000000000E0011B363
-:10E00000020020219362007D2403000102002021F0
-:10E01000AFA30038344200040E0011BCA362007D9F
-:10E020009362003E304200401440000C3262000116
-:10E030001040000A000000008F6300408FC20004FF
-:10E0400024040018246300010040F809AF63004075
-:10E050008FA200300A000E8E304200048F620058FA
-:10E0600010520010000000008F62001802221023DE
-:10E070001C400008240200018F62001816220009CB
-:10E08000000000008F62001C028210230440000583
-:10E0900024020001AF720058AFA20038AF7100181F
-:10E0A000AF74001C12E0000B8FA300380E0011B3F8
-:10E0B00002002021A377003F0E0011BC02002021A6
-:10E0C00002E03021240400370E0013240000282130
-:10E0D0008FA3003810600003000000000E000C9BAE
-:10E0E0000200202112A00005000018218FA200309C
-:10E0F0003042000450400011006010212403000150
-:10E100000A000E8E006010210E0011B302002021C3
-:10E110009362007D02002021344200040E0011BCF5
-:10E12000A362007D0E000C9B020020210A000E8ECF
-:10E1300024020001AF400044240200018FBF0064AC
-:10E140008FBE00608FB7005C8FB600588FB500544B
-:10E150008FB400508FB3004C8FB200488FB1004491
-:10E160008FB0004003E0000827BD00688C870004E2
-:10E170008C8600000000102100E5382100E5282BE6
-:10E1800000C2302100C53021AC87000403E0000844
-:10E19000AC8600008F4201B80440FFFE2402080054
-:10E1A000AF4201B803E00008000000003C02000894
-:10E1B0000342282194A200483084FFFF1040001B36
-:10E1C0002484001294A200483042FFFF0044102A29
-:10E1D00010400017240200032402001A9343012078
-:10E1E000A342018B8F820008306300FF3042400061
-:10E1F000104000092463FFFE94A200483042FFFF54
-:10E200000043102B144000058F820014A743019493
-:10E210000A000EC8344200018F8200142403FFFE5E
-:10E220000043102403E00008AF820014240200031E
-:10E2300003E00008A342018B27BDFFE0AFB2001846
-:10E24000AFB10014AFB00010AFBF001C30B1FFFF82
-:10E2500030D0FFFF30F2FFFF8F4201B80440FFFED5
-:10E2600000000000AF440180AF4400200E000EAA61
-:10E27000020020218F8300088F840014A751018C95
-:10E28000A750018EA74301908F8300043082800045
-:10E29000AF4301A8A75201881040000E8F820014DE
-:10E2A00093420116304200FC24420004005A10211F
-:10E2B0008C4240003042FFFF144000068F82001461
-:10E2C0003C02FFFF34427FFF00821024AF82001423
-:10E2D0008F8200142403BFFF00431024A74201A62D
-:10E2E0009743010C8F42010400031C003042FFFFE2
-:10E2F00000621825AF4301AC3C021000AF4201B8E8
-:10E300008FBF001C8FB200188FB100148FB00010A7
-:10E3100003E0000827BD002027BDFFE0AFB20018D2
-:10E3200030D2FFFFAF440180AF44002002402021E3
-:10E33000AFB10014AFB0001030F1FFFFAFBF001C51
-:10E340000E000EAA30B0FFFF8F8300142402BFFF1F
-:10E35000A750018C006218248F820008A752018EFA
-:10E36000A7510188A74301A6A74201903C021000D3
-:10E37000AF4201B88FBF001C8FB200188FB10014DC
-:10E380008FB0001003E0000827BD00202743018064
-:10E390008F4201B80440FFFE24022000A46200085E
-:10E3A00024020002A062000BA46000103C021000D6
-:10E3B000AF4201B803E00008000000008F47007082
-:10E3C000934201128F83000827BDFFF0304200FF07
-:10E3D000000228823062010000003021104000431A
-:10E3E00024A400033062400010400010306220007E
-:10E3F00000041080005A10218C43400024A4000423
-:10E4000000041080AFA30000005A10218C4240008D
-:10E41000AFA2000493420116304200FC005A1021C2
-:10E420008C4240000A000F56AFA200081040002F97
-:10E430000000302100041080005A10218C4340005D
-:10E4400024A4000400041080AFA30000005A10218F
-:10E450008C424000AFA00008AFA200048FA80008C3
-:10E460000000302100002021240A00083C09080097
-:10E470002529010003A41021148A000300042A00A6
-:10E480001100000A000000009042000024840001F6
-:10E490002C83000C00A210210002108000491021E2
-:10E4A0008C4200001460FFF300C230263C040800D8
-:10E4B0008C8431048F4200702C830020106000098E
-:10E4C000004738233C03080024633108000410800F
-:10E4D0000043102124830001AC4700003C010800E8
-:10E4E000AC233104AF8600042406000100C01021D3
-:10E4F00003E0000827BD00103C0208008C420038F1
-:10E5000027BDFFD0AFB50024AFB3001CAFBF0028BC
-:10E51000AFB40020AFB20018AFB10014AFB000101C
-:10E520003C15080026B50038144000022453FFFFB4
-:10E53000000098218F840008308240001040000ABB
-:10E54000308280003C0200200082102450400006EF
-:10E55000308280008F8200142403BFFF00831824C0
-:10E560000A000FA2344210001040000A3C020020B2
-:10E5700000821024104000078F8200143C03FFFF2C
-:10E5800034637FFF0083182434428000AF8200147C
-:10E59000AF8300080E000F2E00000000144000089A
-:10E5A0008F8400089743011E9742011C3063FFFFD0
-:10E5B0000002140000621825AF8300048F84000855
-:10E5C0009742010C30831000106000113046FFFFAD
-:10E5D000308200201440000F241200053C0210007D
-:10E5E000008210241040000B241200013C030E0096
-:10E5F0003C020DFF008318243442FFFF0043102B20
-:10E6000010400004000000000A000FC4241200059E
-:10E61000241200013C0508008CA5003454A0001908
-:10E620008F8400088F82001C544000168F840008DD
-:10E630008F82001430424000544000128F84000842
-:10E640003C021F01008210243C0310001443000D03
-:10E650008F84000830C202001440000B3C0200010D
-:10E660009746010E364700020000202124C6000410
-:10E6700030C6FFFF0E000F05240500020A00108DB2
-:10E680008FBF00283C020001008210241040000CC3
-:10E690008F8300143C0208008C4200D89746010E7C
-:10E6A000240400802442000130C6FFFF240500023C
-:10E6B0003C010800AC2200D80A00108A240700039D
-:10E6C00030624000104000063C0210003C020F0087
-:10E6D0000082102450400001934201163C021000B9
-:10E6E0000082102410400044000000003C0208009A
-:10E6F0008C4200301040000C306240001040000A94
-:10E700003C030F00008318243C0201000043102B3F
-:10E7100014400005000000009746010E3647000235
-:10E720000A0010872404008010A0000D3082010030
-:10E730001040000B3C020F00008210243C0302003A
-:10E74000104300078F82000400531024005510214D
-:10E7500090420004244200040A00103A000221C042
-:10E76000000000008F8600083C0508008CA500D042
-:10E77000000616023050000F38A200012C420001A2
-:10E780002E03000C0043102414400018001021C078
-:10E790002602FFFC2C4200045440001400002021FB
-:10E7A00038A200022C420001004310241040000354
-:10E7B000000612420A00103A000020210010182B17
-:10E7C0000043102450400009001021C09746010E5C
-:10E7D000000020212405000224C6000430C6FFFFEB
-:10E7E0000E000ECD3247FFFB001021C09746010EF0
-:10E7F0000A001087364700028F4240003C11080093
-:10E800008E310024304201001040004032220001CD
-:10E810000220802110A00017325400043082010031
-:10E8200010400015240200013C020F000082102459
-:10E830003C0302001043000F8F8200049746010E34
-:10E840000240382100531024005510219044000448
-:10E8500024C6000430C6FFFF24840004000421C045
-:10E860000E000ECD240500022402FFFE02228024A9
-:10E870003252FFFB2402000116020007320200019F
-:10E880003242000450400001365200029746010E09
-:10E890000A001086024038211040000A32020004AB
-:10E8A0009746010E024038210000202124C60004B2
-:10E8B00030C6FFFF0E000ECD240500023252FFFBD2
-:10E8C000320200041040000B8F8200083042080022
-:10E8D00010400008000000009746010E0240382159
-:10E8E0002404010024C6000430C6FFFF0E000ECD34
-:10E8F00024050002568000108FBF00280E000F2252
-:10E90000000000000A00108D8FBF00281040000A90
-:10E910008FBF00289746010E3647000200002021D5
-:10E9200024C6000430C6FFFF240500020E000ECDF1
-:10E93000000000008FBF00288FB500248FB4002096
-:10E940008FB3001C8FB200188FB100148FB000106D
-:10E950000000102103E0000827BD0030274301809C
-:10E960008F4201B80440FFFE000000008F420148C2
-:10E9700000021402A462000824020002A062000B3C
-:10E980008F420148A46200108F420144AC6200240F
-:10E990003C02100003E00008AF4201B827BDFFE8C9
-:10E9A000AFB000103C04600CAFBF00148C8250006C
-:10E9B0002403FF7F3C1A8000004310243442380CAB
-:10E9C000AC825000240200033C106000AF420008FB
-:10E9D0008E0208083C1B80083C010800AC20002087
-:10E9E0003042FFF0384200102C4200010E001B396B
-:10E9F000AF8200003C04FFFF3C02040034830806A1
-:10EA00003442000CAE021948AE03194C3C056016A6
-:10EA10008E0219808CA30000344202000064182486
-:10EA2000AE0219803C0253531462000334A47C00EC
-:10EA30008CA20004005020218C82007C8C83007802
-:10EA40008FBF00148FB0001027BD0018AF820018D0
-:10EA500003E00008AF83001027BDFFE8AFBF001040
-:10EA60008F4340003402FFFF3C040800248400F080
-:10EA700010620007000000008F4240003C040800C4
-:10EA8000248400E83042010010400009000000002A
-:10EA90009745010E0E000E9A30A5FFFF9745010E17
-:10EAA0003C040800248431C80A0010FC8FBF001009
-:10EAB0008F4340008F8200103C040800248400E053
-:10EAC0001462000A000000008F4340048F82001887
-:10EAD00014620006000000009745010E3C04080087
-:10EAE000248431B80A0010FC8FBF00109745010E36
-:10EAF0008FBF001030A5FFFF0A000E9A27BD001837
-:10EB000027BDFFE8AFBF00108F420128AF420020B1
-:10EB10008F4201048F430100AF8200080E000EA453
-:10EB2000AF8300140E0010D5000000003C02080066
-:10EB30008C4200C0104000088F8400083C0208008E
-:10EB40008C4200C4244200013C010800AC2200C4F5
-:10EB50000A001135000000003C0200100082102461
-:10EB60001440000A8F8300143C0208008C420020ED
-:10EB7000244200013C010800AC2200200E000F7D61
-:10EB8000000020210A001133000000002402BFFF12
-:10EB9000006210241040000800000000240287FFDB
-:10EBA00000621024144000083C020060008210241F
-:10EBB00010400005000000000E000CC50000000021
-:10EBC0000A001133000000000E00119D000000003B
-:10EBD000104000063C0240008F4301243C026020AC
-:10EBE000AC430014000000003C024000AF4201387A
-:10EBF000000000008FBF001003E0000827BD0018D0
-:10EC000027BDFFE8AFBF00108F4201403C04400029
-:10EC1000AF4200208F4301483C027000006218247C
-:10EC2000106400100083102B144000063C026000AA
-:10EC30003C02200010620007000000000A00115F83
-:10EC40003C0240001062000B3C0240000A00115FD1
-:10EC5000000000000E001096000000000A00115F86
-:10EC60003C0240000E0011C1000000000A00115FCC
-:10EC70003C0240000E001B46000000003C02400029
-:10EC8000AF420178000000008FBF001003E00008D1
-:10EC900027BD001827BDFFE8AFBF00140E0010A667
-:10ECA000AFB000103C028000344200708C43000082
-:10ECB00000403821AF830020006030218CE8000044
-:10ECC0003C0508008CA500FC3C0408008C8400F87E
-:10ECD000010630230000102100A6282100A6302BB9
-:10ECE00000822021008620213C010800AC2500FC88
-:10ECF0003C010800AC2400F88F50000032020003F1
-:10ED00001040FFEE010030218CE600003C050800B9
-:10ED10008CA500FC3C0408008C8400F800C830235B
-:10ED200000A628210000102100A6302B00822021FF
-:10ED300000862021320700013C010800AC2500FCC0
-:10ED4000AF8800203C010800AC2400F810E000046B
-:10ED5000320200020E0010FF00000000320200022A
-:10ED60005040FFD13C0280000E00113F0000000027
-:10ED70000A0011693C0280008F4201003042003ECF
-:10ED80001440001124020001AF4000488F420100EE
-:10ED9000304207C01040000500000000AF40004CAA
-:10EDA000AF40005003E0000824020001AF400054CF
-:10EDB000AF4000408F420100304238005440000113
-:10EDC000AF4000442402000103E0000800000000FE
-:10EDD0003C0290003442000100822025AF44002014
-:10EDE0008F4200200440FFFE0000000003E0000806
-:10EDF000000000003C028000344200010082202517
-:10EE000003E00008AF44002027BDFFE0AFB20018C8
-:10EE1000AFBF001CAFB10014AFB000108F50014065
-:10EE20008F5101483C0280000011940202222024EC
-:10EE3000324300FF2402000E1062008A2862000F95
-:10EE40001040001228620037240200061062003BC6
-:10EE50002862000710400007240200091060001A11
-:10EE60002402000110620025000000000A00127652
-:10EE7000000000001062007B2402000B1062005BA7
-:10EE80003222FFFF0A001276000000001040000846
-:10EE90002402003828620035104000802402001F40
-:10EEA0001062007E000000000A00127600000000E0
-:10EEB0001062007A2402008010620042000000000C
-:10EEC0000A001276000000008F4201B80440FFFEE5
-:10EED00024020001AF500180AF400184A752018895
-:10EEE000A342018A24020002A342018BA751019090
-:10EEF0008F4201440A001271AF4201A41080000A3F
-:10EF0000240200023C010800A02271783C010800A4
-:10EF1000AC3071808F4201443C010800AC22717C0E
-:10EF20000A0012788FBF001C8F4201B80440FFFE18
-:10EF3000240200020A00125B000000008F4201B8A8
-:10EF40000440FFFE00000000AF5001803C020800BA
-:10EF50009042717810400003000018213C03080023
-:10EF60008C637180AF430184A75201883C02080082
-:10EF7000904271780000182134420001A342018AB6
-:10EF800024020002A342018BA75101908F42014449
-:10EF9000AF4201A43C020800904271781040000387
-:10EFA0003C0210003C0308008C63717CAF4301A855
-:10EFB000AF4201B83C010800A02071780A00127825
-:10EFC0008FBF001C8F4201B80440FFFE24020002E4
-:10EFD000A342018BA7520188A75101908F4201449F
-:10EFE000A74201920A0012733C0210001440001D57
-:10EFF0000000000093620005304200041440003716
-:10F00000000000000E0011B30200202193620005F1
-:10F0100002002021344200040E0011BCA36200054E
-:10F02000936200053042000414400002000000001A
-:10F030000000000D9362000024030020304200FF16
-:10F0400014430008000000008F4201B80440FFFE96
-:10F0500024020005AF500180A342018B3C02100046
-:10F06000AF4201B88F4201B80440FFFE2402000203
-:10F07000AF400180AF500184A7520188A342018AAA
-:10F08000A342018BA7510190AF4001A48F420144DC
-:10F09000AF4201A80A0012733C0210008F4201B86F
-:10F0A0000440FFFE24020001AF500180AF40018404
-:10F0B000A7520188A342018A24020002A342018BC5
-:10F0C000A7510190AF4001A4AF4001A83C0210003D
-:10F0D000AF4201B80A0012788FBF001C0000000D7B
-:10F0E0008FBF001C8FB200188FB100148FB00010BA
-:10F0F00003E0000827BD002027BDFFE8AFBF0010D8
-:10F100000E000EA400000000AF4001808FBF001071
-:10F11000000020210A000F7D27BD00183084FFFF6A
-:10F1200030A5FFFF0000182110800007000000003C
-:10F1300030820001104000020004204200651821C6
-:10F140000A0012890005284003E000080060102131
-:10F1500010C0000624C6FFFF8CA2000024A50004F6
-:10F16000AC8200000A0012932484000403E000082B
-:10F170000000000010A0000824A3FFFFAC860000E0
-:10F1800000000000000000002402FFFF2463FFFFD6
-:10F190001462FFFA2484000403E000080000000069
-:10F1A00027BDFFE0AFB20018AFB10014AFB0001040
-:10F1B000AFBF001C9482000C00A088212490001492
-:10F1C0000002130200021080008290210000302112
-:10F1D00000A020210E00129C240500050212102B15
-:10F1E0001040005700001021920300002C6200091B
-:10F1F0005040005192020001000310803C030800BF
-:10F20000246370DC004310218C42000000400008A1
-:10F2100000000000920300012402000C1462004868
-:10F2200024020001025010232C42000A1440003630
-:10F23000261000028E22000034420100AE2200009F
-:10F240009202000092030001920400029205000362
-:10F2500000031C00000216000043102500042200D9
-:10F26000004410250045102526100004AE2200049D
-:10F270009202000092030001920400029205000332
-:10F280000002160000031C000043102500042200A9
-:10F290000044102500451025261000040A0012B66F
-:10F2A000AE2200089203000124020004146200163A
-:10F2B0002610000292020000920400018E2300003A
-:10F2C00000021200004410253463000426100002DE
-:10F2D000AE22000C0A0012B6AE2300009203000119
-:10F2E0002402000314620008261000028E2200008F
-:10F2F000920300002610000134420008A2230010EF
-:10F300000A0012B6AE2200000A00130F2402000108
-:10F31000920300012402000210620002260400028F
-:10F32000024020210A0012B6008080210A0012B695
-:10F3300026100001920200010A0012B6020280218A
-:10F340008FBF001C8FB200188FB100148FB0001057
-:10F3500003E0000827BD002027BDFFE8AFBF001471
-:10F36000AFB000100E0011B3008080219362007DC9
-:10F3700002002021344200200E0011BCA362007D57
-:10F38000020020218FBF00148FB000100A000C9BD8
-:10F3900027BD0018308300FF30A500FF30C600FFF6
-:10F3A000274701808F4201B80440FFFE00000000A3
-:10F3B0008F42012834634000ACE2000024020001C7
-:10F3C000ACE00004A4E30008A0E2000A240200026A
-:10F3D000A0E2000B3C021000A4E50010ACE0002409
-:10F3E000ACE00028A4E6001203E00008AF4201B838
-:10F3F00027BDFFE8AFBF00109362003F2403001257
-:10F40000304200FF1043000D008030218F62004425
-:10F41000008210230440000A8FBF00108F62004852
-:10F42000240400390000282100C2102304410004F4
-:10F43000240600120E001324000000008FBF0010ED
-:10F440002402000103E0000827BD001827BDFFC803
-:10F45000AFB1002C00A08821AFB2003027A500106A
-:10F460000080902102202021AFBF00340E0012A79F
-:10F47000AFB0002810400009024020218E22000871
-:10F48000AF6200840E001315AF6000402404003802
-:10F490002405008D0A0013D1240600129362003463
-:10F4A000936300378F640084304200FF306300FFB5
-:10F4B0000043282100A4202B1080000B0000000036
-:10F4C0009763003C8F6200843063FFFF0045102388
-:10F4D0000062182B14600004000000008F6200849A
-:10F4E0000A00137B004580239762003C3050FFFFE9
-:10F4F0008FA3001030620004504000032E02021857
-:10F500008FA2001C0202102B1440000502002021D3
-:10F510003062000410400002240402188FA4001C72
-:10F520002C82008010400002008080212410008086
-:10F530000E0011B30240202124020001AF62000C32
-:10F540009362003E001020403042007FA362003EE4
-:10F550008E22000424420001AF620040A770003CEC
-:10F560008F6200509623000E00431021AF620058B6
-:10F570008F62005000441021AF62005C8E220004B4
-:10F58000AF6200188E220008AF62001C8FA200102C
-:10F59000304200085440000A93A20020A3600036C5
-:10F5A000936200362403FFDFA36200359362003EBE
-:10F5B00000431024A362003E0A0013B18E2200080B
-:10F5C000A36200358E220008AF62004C8F620024D7
-:10F5D0008F63004000431021AF6200489362000037
-:10F5E00024030050304200FF144300122403FF8024
-:10F5F0003C0208008C4231A002421021004310243A
-:10F60000AF4200283C0208008C4231A08E24000842
-:10F610003C03000C024210213042007F03421021C3
-:10F6200000431021AC4400D88E230008AF8200288C
-:10F63000AC4300DC0E0011BC024020212404003841
-:10F64000000028212406000A0E00132400000000F8
-:10F650008FBF00348FB200308FB1002C8FB00028E4
-:10F660002402000103E0000827BD003827BDFFE8A1
-:10F67000AFBF001090C7000D00C0282130E6001079
-:10F6800010C0000A30E200048CA300088F6200540E
-:10F690001062000630E20004144000178FBF001013
-:10F6A000000020210A000CB227BD00181040000DF8
-:10F6B00030E3001210C000108FBF00108CA30008B0
-:10F6C0008F6200541462000D2402000124040038EB
-:10F6D0002405008D0E001324240600120A0013FDD9
-:10F6E0008FBF001024020012146200038FBF0010AD
-:10F6F0000A00135227BD00182402000103E000088D
-:10F7000027BD001827BDFFF827420180AFA20000E7
-:10F71000308A00FF8F4201B80440FFFE0000000065
-:10F720008F4601283C0208008C4231A02403FF8050
-:10F73000AF86005000C2102100431024AF420024C5
-:10F740003C0208008C4231A08FA900008FA8000065
-:10F7500000C210213042007F034218213C02000AFF
-:10F7600000621821946400D48FA700008FA50000C8
-:10F7700024020002AF830028A0A2000B8FA3000088
-:10F78000354260003084FFFFA4E200083C02100014
-:10F79000AD260000AD040004AC60002427BD0008C5
-:10F7A000AF4201B803E00008240200018C8200048B
-:10F7B0008F83002800451023AC8200049062006310
-:10F7C0003042007FA06200638C820020938300306F
-:10F7D0008F85002834420002AF830044A780004296
-:10F7E000AC820020A4A000E490A200632403FFBF29
-:10F7F0000043102403E00008A0A200632743018017
-:10F800008F4201B80440FFFE8F820050AC620000BE
-:10F810008F420124AC62000424026083A4620008C9
-:10F8200024020002A062000B3C02100003E000086A
-:10F83000AF4201B88F880044938200308F83002844
-:10F840003C07080024E7759400481023304200FF6D
-:10F85000304900FC246500888F860048304A000348
-:10F860001120000900002021248200048CA3000044
-:10F87000304400FF0089102AACE3000024A50004F6
-:10F880001440FFF924E70004114000090000202182
-:10F890002482000190A30000304400FF008A102B56
-:10F8A000A0E3000024A500011440FFF924E70001B3
-:10F8B00030C20003144000048F850044310200036D
-:10F8C0001040000D0000000010A0000900002021E1
-:10F8D0002482000190C30000304400FF0085102BFB
-:10F8E000A0E3000024C600011440FFF924E7000152
-:10F8F00003E00008000000001100FFFD00002021CF
-:10F90000248200048CC30000304400FF0088102BC8
-:10F91000ACE3000024C600041440FFF924E700040F
-:10F9200003E00008000000008F8300449382003051
-:10F9300030C600FF30A500FF00431023304300FF16
-:10F940008F820028008038210043102114C000025B
-:10F95000244800880083382130E200031440000569
-:10F9600030A2000314400003306200031040000D79
-:10F970000000000010A000090000202124820001E6
-:10F9800090E30000304400FF0085102BA10300002D
-:10F9900024E700011440FFF92508000103E00008F6
-:10F9A0000000000010A0FFFD0000202124820004C0
-:10F9B0008CE30000304400FF0085102BAD030000F5
-:10F9C00024E700041440FFF92508000403E00008C0
-:10F9D0000000000027BDFFF82402FFFFAFA20000D7
-:10F9E000008038212405002F3C0908002529719446
-:10F9F000240800FF2406FFFF90E2000024A3FFFF7D
-:10FA00000006220200C21026304200FF00021080D1
-:10FA1000004910218C420000306500FF24E70001FE
-:10FA200014A8FFF50082302600061027AFA20004BC
-:10FA3000AFA200000000282127A6000400C5102363
-:10FA40009044000324A2000100BD1821304500FFAE
-:10FA50002CA200041440FFF9A06400008FA2000053
-:10FA600003E0000827BD00080080482130AAFFFFFE
-:10FA700030C600FF30E7FFFF274801808F4201B802
-:10FA80000440FFFE8F820050AD0200008F4201242F
-:10FA9000AD0200048D220020A5070008A102000A83
-:10FAA00024020016A102000B934301208D220008BE
-:10FAB0008D240004306300FF00431021978300422F
-:10FAC000004410218D250024004310233C0308002E
-:10FAD0008C6331A08F840028A502000C246300E809
-:10FAE0002402FFFFA50A000EA5030010A5060012C0
-:10FAF000AD050018AD020024948201142403FFF721
-:10FB00003042FFFFAD0200288C820118AD02002CAC
-:10FB10003C021000AD000030AF4201B88D22002041
-:10FB20000043102403E00008AD2200208F8200284B
-:10FB300030E7FFFF00804821904200D330A5FFFF4F
-:10FB400030C600FF0002110030420F0000E23825ED
-:10FB5000274801808F4201B80440FFFE8F82005089
-:10FB6000AD0200008F420124AD0200048D2200206E
-:10FB7000A5070008A102000A24020017A102000B39
-:10FB8000934301208D2200088D240004306300FF80
-:10FB90000043102197830042004410218F840028E5
-:10FBA000004310233C0308008C6331A0A502000C25
-:10FBB000A505000E246300E8A5030010A5060012A9
-:10FBC000AD0000148D220024AD0200188C82005C70
-:10FBD000AD02001C8C820058AD0200202402FFFF01
-:10FBE000AD020024948200E63042FFFFAD020028FF
-:10FBF00094820060948300BE30427FFF3063FFFF39
-:10FC00000002120000431021AD02002C3C02100043
-:10FC1000AD000030AF4201B8948200BE2403FFF76C
-:10FC200000A21021A48200BE8D22002000431024D7
-:10FC300003E00008AD220020274301808F4201B875
-:10FC40000440FFFE24020018AC640000A062000B18
-:10FC50008F820028944200E6A46200103C0210004B
-:10FC6000AC60003003E00008AF4201B827430180D8
-:10FC70008F4201B80440FFFE8F82002C9442001C8A
-:10FC80003042FFFF000211C0AC62000024020019E4
-:10FC9000A062000B3C021000AC60003003E00008E2
-:10FCA000AF4201B88F87003430C300FF8F4201B8E4
-:10FCB0000440FFFE8F82005034636000ACA200005D
-:10FCC0009382004CA0A200058CE20010A4A20006C2
-:10FCD000A4A300088C8200202403FFF7A0A2000A3E
-:10FCE00024020002A0A2000B8CE20000ACA20010D3
-:10FCF0008CE20004ACA200148CE2001CACA2002434
-:10FD00008CE20020ACA200288CE2002CACA2002CDB
-:10FD10008C820024ACA200183C021000AF4201B853
-:10FD20008C8200200043102403E00008AC820020F5
-:10FD30009382004C2403000127BDFFE800433004F8
-:10FD40002C420020AFB00010AFBF00142410FFFE03
-:10FD500010400005274501803C0208008C4231908C
-:10FD60000A00159C004610243C0208008C42319485
-:10FD70000046102414400007240600848F830028C6
-:10FD80002410FFFF906200623042000F34420040B6
-:10FD9000A06200620E001568000000000200102141
-:10FDA0008FBF00148FB0001003E0000827BD0018BB
-:10FDB0008F83002C27BDFFE0AFB20018AFB1001455
-:10FDC000AFB00010AFBF001C9062000D00A09021EA
-:10FDD00030D100FF3042007FA062000D8F850028E7
-:10FDE0008E430018008080218CA2007C14620005E4
-:10FDF0002402000E90A20063344200200A0015C5C0
-:10FE0000A0A200630E00158BA382004C2403FFFF09
-:10FE1000104300472404FFFF52200045000020212A
-:10FE20008E4300003C020010006210245040000489
-:10FE30003C020008020020210A0015D4240200150B
-:10FE400000621024504000098E450000020020216D
-:10FE5000240200140E00158BA382004C2403FFFF24
-:10FE6000104300332404FFFF8E4500003C020002D3
-:10FE700000A21024104000163C0200048F86002CC3
-:10FE80008CC200148CC300108CC4001400431023D7
-:10FE90000044102B50400005020020218E43002C0E
-:10FEA0008CC2001010620003020020210A00160517
-:10FEB000240200123C02000400A210245040001C46
-:10FEC00000002021020020210A0016052402001350
-:10FED00000A21024104000068F83002C8C620010BA
-:10FEE00050400013000020210A0015FF02002021CD
-:10FEF0008C620010504000048E42002C0200202131
-:10FF00000A001605240200115040000900002021BB
-:10FF100002002021240200170E00158BA382004C42
-:10FF20002403FFFF104300022404FFFF00002021F0
-:10FF30008FBF001C8FB200188FB100148FB000105B
-:10FF40000080102103E0000827BD002093830030CB
-:10FF500027BDFFE024020034AFB20018AFB1001497
-:10FF6000AFBF001CAFB00010008088211462000CED
-:10FF700000A090218F8400340E0014B48C900030C7
-:10FF80001202000724020005022020210E00158B1A
-:10FF9000A382004C2403FFFF1043005F2404FFFFF3
-:10FFA00092420004104000098F8200280220202184
-:10FFB0002402000C0E00158BA382004C2403FFFFCB
-:10FFC000104300552404FFFF8F820028A3800024E3
-:10FFD0008E4300048C4400803C0200FF3442FFFF4B
-:10FFE000006218240083202B10800008AF83003C9F
-:10FFF00002202021240200190E00158BA382004C40
-:020000040001F9
-:100000002403FFFF104300442404FFFF97820042B3
-:100010008F8700448F88003C00471023110000396F
-:10002000A78200428F8600283045FFFF8F84005052
-:1000300090C300BC3C0208008C4231A0000318822F
-:100040003070000100822021001010800102102178
-:1000500000A2282B10A00010248200888F84003476
-:100060001082000D3C033F018E420000004310242B
-:100070003C0325001443000630E500FF8C8200009D
-:10008000ACC200888C8200100A001665ACC20098D1
-:100090000E001489000030218F85003C93830024DA
-:1000A0008F86002830A20003000210233042000394
-:1000B00000433821A387002494C400E400A228212F
-:1000C0008F8300448F82004834841000A4C400E46D
-:1000D00000431021AF8200481200000EAF8500449B
-:1000E00024E20004A382002494C200E424A30004B8
-:1000F000AF83004434422000A4C200E40A00168505
-:10010000000020218F820048AF800044004710216A
-:10011000AF820048000020218FBF001C8FB2001862
-:100120008FB100148FB000100080102103E0000890
-:1001300027BD00208F86002827BDFFE8AFBF001431
-:10014000AFB0001090C200633042002010400008A1
-:1001500030A500FF8CC2007C2403FFDF2442000195
-:10016000ACC2007C90C2006300431024A0C20063B4
-:1001700010A000238F83002827500180020028212F
-:100180000E001568240600828F82002890420063CA
-:100190003042004050400019A380004C8F8300344F
-:1001A0008F4201B80440FFFE8F820050AE02000073
-:1001B00024026082A602000824020002A202000BB0
-:1001C0008C620008AE0200108C62000CAE020014BB
-:1001D0008C620014AE0200188C620018AE0200247B
-:1001E0008C620024AE0200288C620028AE02002C33
-:1001F0003C021000AF4201B8A380004C8F8300285E
-:100200008FBF00148FB000109062006327BD0018EC
-:100210003042007FA0620063978200428F860044D4
-:100220008F8500289383003000461023A782004268
-:10023000A4A000E490A400638F820048AF83004430
-:100240002403FFBF0046102100832024AF82004812
-:10025000A0A400638F820028A04000BD8F820028E8
-:1002600003E00008A44000BE8F8A002827BDFFE0FD
-:10027000AFB10014AFB000108F880044AFBF0018BA
-:1002800093890024954200E430D100FF0109182B26
-:100290000080802130AC00FF3047FFFF0000582174
-:1002A00014600003310600FF0120302101095823AA
-:1002B000978300420068102B1440003200000000B9
-:1002C00014680007240200018E0200202403FFFBB3
-:1002D00034E7800000431024AE0200202402000115
-:1002E00034E70880158200053165FFFF0E0014D940
-:1002F000020020210A00171A020020210E00150A10
-:10030000020020210E00154D8F8400508F8400289C
-:100310009482006024420001A48200609482006004
-:100320003C0308008C63318830427FFF5443000F48
-:1003300002002021948200602403800000431024E6
-:10034000A48200609082006090830060304200FFD1
-:10035000000211C200021027000211C03063007FAA
-:1003600000621825A08300600200202102202821BD
-:100370008FBF00188FB100148FB000100A00168CC8
-:1003800027BD0020914200632403FF800043102515
-:10039000A1420063978200423048FFFF1100002015
-:1003A000938300248F840028004B1023304600FFE5
-:1003B000948300E42402EFFF0168282B00621824D4
-:1003C000A48300E414A000038E0200200100582141
-:1003D000000030212403FFFB34E780000043102499
-:1003E000AE02002024020001158200053165FFFFE6
-:1003F0000E0014D9020020210A0017429783004200
-:100400000E00150A02002021978300428F820044CB
-:10041000A780004200431023AF820044938300244E
-:100420008F8200288FBF00188FB100148FB000108A
-:1004300027BD002003E00008A04300BD8F820028F4
-:1004400090430088904500BD244900883063003FF8
-:100450002463FFE024020001006238042C630020C2
-:1004600030E80019A385002410600010AF89003423
-:100470003C028000344200022405000124060001F1
-:100480001500000800E2182400002821146000056F
-:1004900030E20020104000052405000191260001F3
-:1004A00030C600010A0016D90000000003E0000871
-:1004B0000000000027BDFFD8AFB000108F900034BF
-:1004C000AFB40020AFB10014AFBF0024AFB3001C25
-:1004D000AFB200188E0500103C0208008C4231B00B
-:1004E0008F86003830A33FFF0062182B8CD3001496
-:1004F000008088218CD20020106000780000A021AC
-:1005000090C3000D2402FF8000431024304200FFFE
-:100510005040007302202021000513823042000366
-:100520005440006F0220202194C3001C8F820028B9
-:100530008E050028A44301148CC200100262182307
-:10054000146500072402001F8F82003C0062102106
-:100550000262102B104000088F83002C2402001828
-:100560000E00158BA382004C2403FFFF1043006F85
-:100570002404FFFF8F83002C8F84003C8C620010CA
-:100580000244902100441023AC6200108F820028A6
-:10059000AC7200208C4200680052102B1040000901
-:1005A0008F830038022020212402001D0E00158BAD
-:1005B000A382004C2403FFFF1043005C2404FFFFD0
-:1005C0008F8300388E0200248C63002410430007C0
-:1005D000022020212402001C0E00158BA382004C57
-:1005E0002403FFFF104300512404FFFF8F84002CDD
-:1005F0008C82002424420001AC82002412530004A7
-:100600008F8200288C4200685642000E8E02000045
-:100610008E0200003C030080004310241440000DB3
-:100620002402001A022020210E00158BA382004C08
-:100630002403FFFF1043003D2404FFFF0A0017D6E8
-:100640008E0200143C03008000431024504000033D
-:100650008E020014AC8000208E0200142412FFFFD2
-:10066000105200062402001B022020210E00158BD0
-:10067000A382004C1052002D2404FFFF8E030000C3
-:100680003C020001006210241040001F3C02008068
-:100690000062102414400008022020212402001AC5
-:1006A0000E00158BA382004C2403FFFF1043001F94
-:1006B0002404FFFF02202021020028210E0015AB98
-:1006C000240600012403FFFF2404FFFF1443000E4F
-:1006D000241400010A00180B8FBF002402202021DF
-:1006E0002402000D8FBF00248FB400208FB3001CA4
-:1006F0008FB200188FB100148FB0001027BD0028F2
-:100700000A00158BA382004C8F83002C022020212D
-:100710000280302194620036240500012442000149
-:100720000E0016D9A4620036000020218FBF0024DD
-:100730008FB400208FB3001C8FB200188FB100144B
-:100740008FB000100080102103E0000827BD0028B2
-:100750008F83002827BDFFD8AFB40020AFB3001CA3
-:10076000AFB20018AFB10014AFB00010AFBF00249B
-:10077000906200638F9100342412FFFF34420040E6
-:1007800092250000A06200638E2200100080982154
-:1007900030B0003F105200060360A0212402000D7B
-:1007A0000E00158BA382004C105200522404FFFF50
-:1007B0008F8300288E2200188C63007C1043000772
-:1007C000026020212402000E0E00158BA382004C33
-:1007D0002403FFFF104300472404FFFF24040020EC
-:1007E000120400048F8300289062006334420020CA
-:1007F000A06200638F85003C10A0001E0000000076
-:10080000560400048F820028026020210A00185537
-:100810002402000A9683000A2404FFFD944200602B
-:100820003042FFFF104300348FBF00243C02080019
-:100830008C42318C0045102B1440000602602021B0
-:10084000000028210E0016D9240600010A00187C99
-:10085000000020212402002D0E00158BA382004CE5
-:100860002403FFFF104300232404FFFF0A00187C29
-:1008700000002021160400058F8400288E23001418
-:100880002402FFFF50620018026020219482006061
-:1008900024420001A4820060948200603C030800AE
-:1008A0008C63318830427FFF5443000F0260202167
-:1008B000948200602403800000431024A48200601E
-:1008C0009082006090830060304200FF000211C2FD
-:1008D00000021027000211C03063007F006218255B
-:1008E000A0830060026020210E00168C2405000108
-:1008F000000020218FBF00248FB400208FB3001C84
-:100900008FB200188FB100148FB00010008010213A
-:1009100003E0000827BD00288F83002827BDFFE8DB
-:10092000AFB00010AFBF0014906200638F87003437
-:1009300000808021344200408CE60010A0620063F9
-:100940003C0308008C6331B030C23FFF0043102BE2
-:100950001040004E8F8500382402FF8090A3000DC8
-:1009600000431024304200FF504000490200202183
-:10097000000613823048000324020002550200449E
-:100980000200202194A2001C8F850028240300234C
-:10099000A4A201148CE60000000616023042003FBB
-:1009A000104300103C0300838CE300188CA2007CF1
-:1009B000106200062402000E0E00158BA382004C6C
-:1009C0002403FFFF104300382404FFFF8F83002817
-:1009D0009062006334420020A06200630A0018C1E4
-:1009E0008F83002C00C31024144300078F83002C36
-:1009F00090A200623042000F34420020A0A20062A8
-:100A0000A38800408F83002C9062000D3042007F4D
-:100A1000A062000D8F83003C1060001802002021AE
-:100A20008F8400388C8200100043102B1040000986
-:100A300024020018020020210E00158BA382004C16
-:100A40002403FFFF104300182404FFFF0A0018E9E5
-:100A5000000020218C8200102405000102002021CA
-:100A6000004310238F83002C240600010E0016D9AA
-:100A7000AC6200100A0018E9000020210E00168C5C
-:100A8000240500010A0018E90000202102002021AD
-:100A90002402000D8FBF00148FB0001027BD001876
-:100AA0000A00158BA382004C8FBF00148FB000107A
-:100AB0000080102103E0000827BD001827BDFFD8E3
-:100AC000AFB000108F900034AFB3001CAFBF002058
-:100AD000AFB20018AFB100148E1200103C03080032
-:100AE0008C6331B032423FFF0043102B1040007C3A
-:100AF000008098218F8500382402FF8090A3000D8C
-:100B000000431024304200FF504000760260202154
-:100B10000012138230420003240300015443007189
-:100B20000260202190A2000D3042000854400003D2
-:100B30008F82003C0A00191924020024504000034F
-:100B40008E03000C0A001919240200278CA2002031
-:100B500014620005240200208E0300088CA20024E9
-:100B600010620008240200200E00158BA382004CA6
-:100B70002403FFFF1043006A2404FFFF0A00194406
-:100B80008F84002C8E0200142411FFFF14510003E7
-:100B90008F8700280A00193F240200258E030018C1
-:100BA0008CE2007C146200162402000E8E030024E6
-:100BB0008CA2002814620012240200218E06002854
-:100BC0008CA2002C14C2000E2402001F8E03002CE5
-:100BD0001060000B240200238CE200680043102BFD
-:100BE00014400007240200268CA20014006618217D
-:100BF0000043102B504000078F84002C2402002259
-:100C00000E00158BA382004C105100452404FFFFF9
-:100C10008F84002C2403FFF79082000D00431024E2
-:100C2000A082000D8F8600283C0308008C6331AC45
-:100C30008F82005094C400E08F85002C0043102167
-:100C400030847FFF00042040004410213043007FA7
-:100C5000034320213C03000E008320212403FF8056
-:100C600000431024AF42002CA49200008CA2002864
-:100C700024420001ACA200288CA2002C8E03002C80
-:100C800000431021ACA2002C8E02002CACA200303C
-:100C90008E020014ACA2003494A2003A2442000157
-:100CA000A4A2003A94C600E03C0208008C4231B095
-:100CB00024C4000130837FFF1462001300803021C0
-:100CC000240280000082302430C2FFFF000213C2E1
-:100CD000304200FF000210270A001981000233C0D1
-:100CE000026020212402000D8FBF00208FB3001C62
-:100CF0008FB200188FB100148FB0001027BD0028EC
-:100D00000A00158BA382004C8F82002802602021EC
-:100D1000240500010E00168CA44600E000002021EE
-:100D20008FBF00208FB3001C8FB200188FB100144A
-:100D30008FB000100080102103E0000827BD0028BC
-:100D400027BDFFE0AFB100148F910034AFB00010A9
-:100D5000AFBF00188E2600103C0308008C6331B032
-:100D600030C23FFF0043102B1040005E0080802106
-:100D70008F8500382402FF8090A3000D00431024CB
-:100D8000304200FF50400058020020218F82003C7A
-:100D900010400008000613828F8200289763000A23
-:100DA0002404FFFD944200603042FFFF10430055D1
-:100DB00000061382304200031440000E00000000C1
-:100DC00092220002104000058E230024506000157E
-:100DD000922300030A0019BA020020218CA20024E9
-:100DE0005062001092230003020020210A0019C261
-:100DF0002402000F90A2000D304200085440000968
-:100E00009223000302002021240200100E00158B03
-:100E1000A382004C2403FFFF1043003A2404FFFF89
-:100E200092230003240200025462000C9222000369
-:100E30008F82003C544000099222000302002021CE
-:100E40002402002C0E00158BA382004C2403FFFF0C
-:100E50001043002C2404FFFF9222000302202821CB
-:100E600002002021384600102CC600012C4200014F
-:100E70000E0015AB004630252411FFFF1051002154
-:100E80002404FFFF8F83003C106000120200202129
-:100E90003C0208008C42318C0043102B14400006A9
-:100EA00000000000000028210E0016D924060001D1
-:100EB0000A001A00000020212402002D0E00158BCC
-:100EC000A382004C1051000F2404FFFF0A001A00F7
-:100ED000000020210E00168C240500010A001A00D3
-:100EE00000002021020020212402000D8FBF0018E5
-:100EF0008FB100148FB0001027BD00200A00158BA1
-:100F0000A382004C8FBF00188FB100148FB0001067
-:100F10000080102103E0000827BD002093830040DB
-:100F200027BDFFE024020002AFB10014AFB00010F3
-:100F300000808821AFBF0018000080211062008C63
-:100F40002404FFFD978500428F83004430A2FFFFF9
-:100F50000043102B5440007D8F8400480E00144C39
-:100F6000000000003C020800244275940220202169
-:100F7000004028210E001612AF8200342409FFFF22
-:100F80001049007B2404FFFF3C0808008D0875A46D
-:100F90003C0208008C4231B03C0308009063759419
-:100FA00031043FFF0082102B1040001B3067003FD0
-:100FB0003C0208008C4231A88F830050000421803D
-:100FC00000621821006418213062007F034228214A
-:100FD0003C02000C00A228213C02008034420001A7
-:100FE0003066007800C230252402FF8000621024A1
-:100FF000AF42002830640007AF4208048F82002807
-:101000000344202124840940AF460814AF85002CF6
-:10101000AF840038AC4301189383004024020003DE
-:101020001462003B240200012402002610E2003D6D
-:1010300028E200271040001324020032240200227C
-:1010400010E2003828E200231040000824020024A7
-:101050002402002010E200242402002110E2001EDD
-:10106000022020210A001A7F2402000B10E2002D2A
-:101070002402002510E20010022020210A001A7F1D
-:101080002402000B10E2001A28E200331040000690
-:101090002402003F2402003110E2000B0220202134
-:1010A0000A001A7F2402000B10E200110220202106
-:1010B0000A001A7F2402000B0E00176C0220202168
-:1010C0000A001A9A004080210E0018EE022020210A
-:1010D0000A001A9A004080210E00198F0220202158
-:1010E0000A001A9A004080211509000E0000000035
-:1010F0000E001813022020210A001A9A00408021B5
-:101100000E00158BA382004C0A001A9A0040802121
-:1011100014620017020020212402002314E20005BB
-:101120002402000B0E001885022020210A001A9AC2
-:101130000040802102202021A382004C0E00158B4C
-:101140002410FFFF0A001A9B0200202130A500FF97
-:101150000E00148924060001978300428F82004408
-:10116000A780004200431023AF82004402002021E8
-:101170008FBF00188FB100148FB0001000801021B5
-:1011800003E0000827BD002027BDFFE0AFB1001439
-:10119000AFBF0018AFB000108F4601283C03080015
-:1011A0008C6331A02402FF80AF86005000C3182159
-:1011B0003065007F03452821006218243C02000AA4
-:1011C000AF43002400A2282190A200620080882161
-:1011D000AF850028304200FF00021102A3820040C8
-:1011E00090A200BC304200021440000224030034EC
-:1011F000240300308F820028A383003093830040B3
-:101200008C4200C0A380004CAF8200442402000442
-:10121000106200308F8400448E2400045080002D22
-:101220008F8400448E2200103083FFFFA784004289
-:101230001060001FAF8200488F8300282405FF80C4
-:10124000022020219062006300A21024304200FF9F
-:101250001440000D000000000E001A069790004296
-:1012600010400010004018212402FFFD54620011BC
-:101270008E230020020028210E00142A02202021A3
-:101280000A001AEC8E2300209062006300A2102452
-:10129000304200FF10400003022020210E00174EB4
-:1012A00000000000978200421440FFE48F83002872
-:1012B0008E23002030620004104000068F8400441A
-:1012C0002402FFFB006210240E00143EAE22002018
-:1012D0008F8400448F8300288FBF00188FB10014C3
-:1012E0008FB000102402000127BD002003E0000899
-:1012F000AC6400C030A500FF2403000124A9000154
-:101300000069102B1040000C00004021240A00014D
-:1013100000A31023004A3804246300013082000136
-:101320000069302B104000020004204201074025D4
-:1013300054C0FFF800A3102303E0000801001021AF
-:1013400027BDFFE03C021EDCAFB20018AFB10014B5
-:10135000AFBF001CAFB0001034526F4100008821B5
-:10136000240500080E001AFC0220202100118080B4
-:101370003C07080024E771940002160002071821B8
-:10138000AC6200000000282124A200013045FFFFCC
-:101390008C6200002CA600080441000200022040DC
-:1013A0000092202614C0FFF8AC64000002078021E0
-:1013B0008E0400000E001AFC2405002026230001E4
-:1013C0003071FFFF2E2301001460FFE5AE02000024
-:1013D0008FBF001C8FB200188FB100148FB00010A7
-:1013E00003E0000827BD00203C02080024426A8474
-:1013F0003C010800AC2271883C02080024425000E5
-:101400003C010800AC22718C240200063C0108005B
-:10141000A02271900A001B0F0000000027BDFFD81A
-:10142000AFB3001CAFB20018AFBF0020AFB10014C3
-:10143000AFB000108F5101408F480148000894025E
-:10144000324300FF311300FF8F4201B80440FFFE1A
-:1014500027500180AE1100008F420144AE0200040B
-:1014600024020002A6120008A202000B24020014AB
-:10147000AE130024106200252862001510400008F9
-:101480002402001524020010106200302402001211
-:10149000106200098FBF00200A001C308FB3001CAF
-:1014A0001062006724020022106200378FBF002004
-:1014B0000A001C308FB3001C3C0208008C4231A093
-:1014C0002403FF800222102100431024AF42002495
-:1014D0003C0208008C4231A0022210213042007FE1
-:1014E000034218213C02000A00621821166000B372
-:1014F000AF830028906200623042000F3442003017
-:10150000A06200620A001C2F8FBF00203C04600014
-:101510008C832C083C02F0033442FFFF0062182445
-:10152000AC832C083C0208008C4231A08C832C0830
-:101530002442007400021082000214800062182508
-:10154000AC832C080A001C2F8FBF00203C0208002F
-:101550008C4231A02403FF8002221021004310247A
-:10156000AF4200243C0208008C4231A03C03000A38
-:10157000022210213042007F03421021004310213B
-:101580000A001C2EAF8200283C0208008C4231A0C9
-:101590002404FF800222102100441024AF420024C2
-:1015A0003C0208008C4231A0022210213042007F10
-:1015B000034218213C02000A006218219062006375
-:1015C00000821024304200FF1040007CAF830028CE
-:1015D00024620088944300123C0208008C4231A827
-:1015E00030633FFF000319800222102100431021C5
-:1015F0003043007F03431821004410243C04000CB6
-:1016000000641821AF4200280E00155AAF83002C49
-:101610008F4201B80440FFFE00000000AE11000040
-:101620008F420144AE02000424020002A612000808
-:10163000A202000BAE1300240A001C2F8FBF002053
-:101640002406FF8002261024AF4200203C0208003E
-:101650008C4231A031043FFF00042180022210217E
-:1016600000461024AF4200243C0308008C6331A8DC
-:101670003C0208008C4231A03227007F022318214F
-:1016800002221021006418213042007F3064007F64
-:10169000034228213C02000A0066182400A22821E7
-:1016A000034420213C02000C00822021AF4300288B
-:1016B0003C0200080347182100629021AF850028F2
-:1016C000AF84002C0E00155A010080218F4201B812
-:1016D0000440FFFE8F82002C8F8400282745018064
-:1016E0009042000DACB10000A4B00006000216004C
-:1016F0000002160300021027000237C214C00016B1
-:10170000248200889442001232033FFF30423FFFA0
-:101710001443001224026082908300632402FF803D
-:1017200000431024304200FF5040000C240260822D
-:10173000908200623042000F34420040A08200627A
-:1017400024026084A4A200082402000DA0A20005C7
-:101750000A001C193C02270024026082A4A200088F
-:10176000A0A000053C02270000061C00006218250E
-:1017700024020002A0A2000BACA30010ACA0001435
-:10178000ACA00024ACA00028ACA0002C8E42004CE1
-:101790008F84002CACA200189083000D2402FF80DF
-:1017A00000431024304200FF104000058FBF00208E
-:1017B0009082000D3042007FA082000D8FBF00207C
-:1017C0008FB3001C8FB200188FB100148FB00010BF
-:1017D0003C02100027BD002803E00008AF4201B81A
-:1017E00008004C2808004C2808004BA008004BD8E3
-:1017F00008004C0C08004C3008004C3008004C30FD
-:0418000008004B1081
-:0C1804000A0001220000000000000000AB
-:101810000000000D747061342E362E313600000049
-:10182000040610010000000000000000000000009D
-:1018300000000000000000000000000000000000A8
-:101840000000000000000000000000000000000098
-:101850000000000000000000000000000000000088
-:101860000000000000000000000000000000000078
-:101870000000000000000000000000000000000068
-:101880000000000000000000000000000000000058
-:1018900010000003000000000000000D0000000D1B
-:1018A0003C02080024421B803C03080024632014EF
-:1018B000AC4000000043202B1480FFFD24420004B4
-:1018C0003C1D080037BD2FFC03A0F0213C10080090
-:1018D000261004883C1C0800279C1B800E00015A1F
-:1018E000000000000000000D3084FFFF3082000780
-:1018F0008F85001810400002248300073064FFF831
-:101900000085302130C41FFF03441821247B400090
-:10191000AF85001CAF84001803E00008AF440084CA
-:101920003084FFFF308200078F8500208F860028DB
-:1019300010400002248300073064FFF80085202156
-:101940000086182B14600002AF8500240086202337
-:101950000344282134068000AF840020AF44008077
-:1019600000A6202103E00008AF84003827BDFFD87F
-:10197000AFB3001CAFB20018AFB00010AFBF00246F
-:10198000AFB40020AFB100143C0860088D145000C3
-:101990002418FF7F3C1A8000029898243672380C75
-:1019A000AD1250008F5100083C07601C3C086000DD
-:1019B00036300001AF500008AF800018AF40008003
-:1019C000AF4000848CE600088D0F08083C076016C5
-:1019D0008CEC000031EEFFF039CA00103C0DFFFF27
-:1019E000340B80003C030080034B48212D44000150
-:1019F000018D28243C0253533C010800AC230420F1
-:101A0000AF890038AF860028AF840010275B400004
-:101A100014A2000334E37C008CF90004032818218D
-:101A20008C7F007C8C6500783C0280003452007012
-:101A3000AF85003CAF9F00403C13080026731BC4D9
-:101A40000240A0218E4800008F46000038C30001EC
-:101A50003064000110800017AF88003402804821F4
-:101A60008D2D00003C1908008F39045C3C110800E2
-:101A70008E31045801A8F823033F7821000040214B
-:101A80000228382101FF802B00F070213C01080062
-:101A9000AC2F045C3C010800AC2E04588F4C0000B5
-:101AA000398B0001316A00011540FFED01A0402192
-:101AB000AF8D00348E4E00003C0C08008D8C045C11
-:101AC0003C0A08008D4A045801C86823018D28216A
-:101AD0000000582100AD302B014B20210086102141
-:101AE0003C010800AC25045C3C010800AC22045811
-:101AF0008F4501088F44010030A92000AF85000008
-:101B0000AF84000C1120000A00A030213C0708001F
-:101B10008CE7042C24EF00013C010800AC2F042CBE
-:101B20003C104000AF5001380A0001900000000056
-:101B300030B002001600001424110F0010910012A2
-:101B400024070D001087023330B000065200FFF565
-:101B50003C104000936D0000240C001031A600F0F2
-:101B600010CC0269240E007010CE02DD8F8B0014A1
-:101B700025670001AF8700143C104000AF500138CA
-:101B80000A00019000000000974801041100FFE5E1
-:101B90003C10400030B84000170000A200000000D8
-:101BA0008F5901780720FFFE8F870038240900082D
-:101BB000240508008CE30008AF450178A7490140DF
-:101BC000A7400142974201048F8600003049FFFF81
-:101BD00030DF000113E002D5012040212524FFFE63
-:101BE000240A0002A74A01463088FFFFA7440148A3
-:101BF0003C0B08008D6B043C156002C48F8F000CF9
-:101C000030C30020146000022404000924040001F1
-:101C100030CD0C00240C040051AC000134840004CD
-:101C2000A744014A3C0508008CA504203C0200485A
-:101C30003C19000100A2F82530D8000203F928253C
-:101C400013000004000018213C04010000A4282512
-:101C50002403000130CA000451400005AF8300088E
-:101C60003C06001000A6282524030001AF830008CD
-:101C7000AF45100000000000000000000000000060
-:101C8000000000008F8300081060002300000000A7
-:101C90008F4B10000561FFFE000000001060001E69
-:101CA000000000008F4D10003C03002001A36024C1
-:101CB000118000198F8F000031EE000211C0001654
-:101CC00000000000975010141600001300000000E0
-:101CD0009745100830BFFFFF27F800060018C8829C
-:101CE0000019308000C7282133110001330300039D
-:101CF000122003208CA200000000000D00C7F82174
-:101D0000AFE200003C1908008F390430272600019B
-:101D10003C010800AC2604308F6A00003405FFFF48
-:101D2000AF8A00048CE200001045029A00002021D6
-:101D30008CE5000030BF010013E0027E010020218D
-:101D40003C0708008CE704743C1008008E10044C1B
-:101D500000E858213C1808008F1804700168882B8F
-:101D60003C0808008D080448000078210204602126
-:101D7000030F18210184702B010F6821007150217D
-:101D800001AE10213C010800AC2C044C3C010800C1
-:101D9000AC2204483C010800AC2B04743C01080050
-:101DA000AC2A04708F8D00180120302131290007E2
-:101DB00025AE000831C21FFF03426021AF8D001C19
-:101DC000AF820018259B4000AF4200841120000321
-:101DD0008F90002024C800073106FFF88F84002868
-:101DE00000D0282100A4782B15E00002AF90002439
-:101DF00000A4282303452021340380000083102100
-:101E00003C061000AF850020AF820038AF4500804F
-:101E1000AF4601788F8B0014256700010A0001DDB1
-:101E2000AF8700148F6200088F6700002411003014
-:101E30000007C602330300F0107100A2241900400D
-:101E40001479FF4B8F8B00148F4A01780540FFFEF9
-:101E500030A7020014E00003000512820000000D0C
-:101E6000000512823050000300104900013070213B
-:101E7000000E688001B06021000C58800173802141
-:101E80008E08000015000002000000000000000D98
-:101E90008F6F000405E202B192030006920700056D
-:101EA000920F00043C0200010007288000B060216E
-:101EB0008D8900182771000825EE00050122682190
-:101EC000000E3082AD8D0018022020210E0005800A
-:101ED00026050014920B00068F7F00043C087FFF4C
-:101EE000000B2080009130218CC30004350AFFFFD5
-:101EF00003EAC8240079C021ACD800049207000589
-:101F000092090004960D00080007288000B1F8210E
-:101F10008FEF0000974201043C07FFFF01E75024C8
-:101F2000304EFFFF01C96021018D58233168FFFF4A
-:101F300001482025AFE400009203000724190001A6
-:101F4000107902692406000310660279000000007F
-:101F50008E190010241F000AA75F0140A7590142F3
-:101F6000920300048F86000024070001A743014468
-:101F7000A74001469758010430D100023C050041BA
-:101F8000A758014800001821A747014A1220000362
-:101F900030CA00043C050141240300015140000502
-:101FA000AF8300083C08001000A828252403000186
-:101FB000AF830008AF4510000000000000000000E3
-:101FC00000000000000000008F8B0008116000047A
-:101FD000000000008F4410000481FFFE000000009C
-:101FE0008F6A0000920700043C0508008CA5044499
-:101FF000AF8A0004975F01043C0F08008DEF044096
-:1020000030E300FF33F9FFFF0079C02100B86821F9
-:102010000000102124E6000A30C8FFFF01B8482B59
-:1020200001E2702101C96021311000073C01080064
-:10203000AC2D04443C010800AC2C04401200000309
-:102040008F8D0018250B00073168FFF8010D7021F6
-:1020500031CC1FFFAF8D001CAF8C0018AF4C00843B
-:1020600097440104034C80213084FFFF308800072F
-:1020700011000003261B4000248900073124FFF8CB
-:102080008F8200208F850028008220210085782BF8
-:1020900015E00002AF82002400852023034488213C
-:1020A00034058000022510213C061000AF8400207A
-:1020B000AF820038AF440080AF4601780A00028545
-:1020C0008F8B00148F5F017807E0FFFE30AA0200BB
-:1020D00015400003000542820000000D0005428209
-:1020E000310200030002710001C26821000D60800E
-:1020F000018248210009288000B380218E0B000056
-:1021000011600002000000000000000D8F6F000C45
-:1021100005E001F38F87003824190001AE19000093
-:102120008CE30008A20000078F78000400181C024E
-:10213000306600FF24D10005001130832CC400411B
-:1021400014800002A20300040000000D8F6B000445
-:102150003C0EFFFF00E028213164FFFF248F000BBD
-:10216000000F408200081080004748218D2D00009C
-:1021700026040014A60B000801AE60240E000580A2
-:10218000AD2C00008F5F01083C0A100003EA3824E0
-:1021900010E001A30000000097460104920300072D
-:1021A00024D1FFEC346500023224FFFFA2050007B2
-:1021B000960600082CC7001354E0000592030007A0
-:1021C000920A0007355F0001A21F00079203000773
-:1021D000240B0001106B01BA24090003106901CD22
-:1021E0008F88003830CFFFFF25E400020004C88349
-:1021F000333F00FF001F2880A219000500A85821C6
-:102200008D780000975101043C03FFFF0303602415
-:102210003222FFFF004F702325CDFFFE018D4825A0
-:10222000AD690000920600053C02FFF6344EFFFF48
-:1022300030CA00FF000A388000F020219099001475
-:102240003C1FFF7F37E7FFFF3323000F0066782135
-:1022500031F800FF0018288000B088218E2D002062
-:1022600000A86021A20F000601AE4824AE0D000CAC
-:10227000AD89000C920B00068E04000C0127F82497
-:10228000000B50800150C821972600260148C0212C
-:1022900000874024AF260024AE08000CAF3F00208A
-:1022A000AF0600108F860000240C001024090002E5
-:1022B000A74C0140A7400142A7400144A74901465D
-:1022C000974B01042407000130C80002256AFFFE75
-:1022D000A74A01483C050009A747014A110000032D
-:1022E000000018213C0501092403000130CD000441
-:1022F00051A00005AF8300083C06001000A6282569
-:1023000024030001AF830008AF4510000000000067
-:10231000000000000000000000000000921800040F
-:1023200027110002322F0007000F1023304E000744
-:10233000AE0E00108F900008120000040000000094
-:102340008F4310000461FFFE000000008F78000042
-:102350008F8F00183C1008008E100444AF980004C2
-:102360009751010425E6001030CA1FFF3222FFFFFB
-:10237000AF8F001CAF8A0018AF4A00842449FFFECB
-:102380003C0B08008D6B0440974E0104012068212E
-:10239000000967C3020D282131C9FFFF00AD402BA2
-:1023A000016C382100E82021034AF8213139000767
-:1023B0003C010800AC2504443C010800AC24044066
-:1023C0001320000327FB4000252300073069FFF896
-:1023D0008F9F00208F840028013F382100E4C82B04
-:1023E00017200002AF9F002400E438230347202178
-:1023F00034058000008510213C061000AF870020C6
-:10240000AF820038AF470080AF4601780A000285EE
-:102410008F8B0014975801041300FDC23C1040003C
-:102420008F4301780460FFFE30B9400013200003A1
-:102430003C0400080000000D3C040008AF440140CB
-:1024400024080800AF4801788F8B0000974A0104E8
-:10245000317F000113E000E93146FFFF24D0FFFE89
-:10246000240C0002A74C0146A75001488F8F00188A
-:102470002405000DA745014A8F71000025E20008E0
-:1024800030491FFF0349702130CD0007AF91000490
-:10249000AF8F001CAF89001800C03821AF490084FD
-:1024A00011A0000325DB400024C6000730C7FFF859
-:1024B0008F9800208F84002800F8302100C4382B2A
-:1024C00014E00002AF98002400C430238F8A001467
-:1024D00003465821340880000168F821255900017D
-:1024E0003C0310003C104000AF860020AF9F003836
-:1024F000AF460080AF430178AF990014AF50013868
-:102500000A000190000000008F6900009744010458
-:102510003127FFFF3088FFFF8F4F017805E0FFFE76
-:1025200030FF0007001F18233078000724E6FFFE65
-:102530002419000AA7590140A7580142A74601449F
-:10254000A7400146A74801488F42010830510020AA
-:1025500016200002240300092403000130AA00020F
-:10256000A743014A3C040041114000030000182128
-:102570003C0401412403000130AB0004516000051C
-:10258000AF8300083C0500100085202524030001CE
-:10259000AF830008AF4410000000000000000000FE
-:1025A00000000000000000008F90000812000004EE
-:1025B000000000008F4C10000581FFFE00000000AD
-:1025C0008F780000276200088F8D003CAF980004D0
-:1025D000944600089451000A944F000C30CEFFFF3F
-:1025E0000011240031E9FFFF11CD00A20089202550
-:1025F0003C0308008C6304443C1808008F18044016
-:1026000000E85021255FFFFE007F782100001021A7
-:1026100001FF302B03028821022648213C010800DB
-:10262000AC2F04443C010800AC29044024EB000812
-:102630003162FFFF3047000710E000038F8500186C
-:10264000245000073202FFF83106FFFF30C80007B0
-:102650000045702131CD1FFF034D6021AF85001C67
-:10266000AF8D0018259B4000AF4D00841100000382
-:102670008F8F002024C400073086FFF88F84002845
-:1026800000CF282100A4482B15200002AF8F002482
-:1026900000A42823AF850020AF4500803C1108002E
-:1026A0008E3104340345C0213402800003023021FE
-:1026B00012200005AF860038938300172419000EFE
-:1026C0001079000D241F043F3C0A1000AF4A017826
-:1026D0008F8B0014256700010A0001DDAF8700140D
-:1026E0000E0005A63C1040008F8B001425670001EA
-:1026F0000A0001DEAF8700143C0A1000A75F014802
-:10270000AF4A01780A0004B48F8B0014240E0F0026
-:1027100011EE003D30D100201620000224030009F4
-:10272000240300010A000208A743014A0A0001FB32
-:10273000A740014694E5000894E2000A94EB000CDF
-:102740008F86003C0002FC00316AFFFF30B9FFFFBA
-:102750001326003703EA20253C0508008CA5044415
-:102760003C1F08008FFF04400000502100A83821C2
-:1027700000E8302B03EAC8210326C0213C010800F1
-:10278000AC2704443C010800AC3804400A0002694C
-:102790008F8D00183C1908008F39047C3C03080019
-:1027A0008C6304543C0608008CC604783C0F080077
-:1027B0008DEF0450032838210068682100E8C02B01
-:1027C00000C4882101A8402B01E47021023858215F
-:1027D00001C860213C010800AC2D04543C010800F4
-:1027E000AC2C04503C010800AC27047C3C010800E0
-:1027F000AC2B04780A0002698F8D0018A7400146AF
-:102800000A00041B8F8F001830D000201600FFC56F
-:102810002403000D240300050A000208A743014A0F
-:10282000975901042738FFF00A00036B3304FFFFB8
-:102830008F8C0040148CFFC8000080213C110800E0
-:102840008E31046C3C0408008C84046802287021DA
-:1028500001C8782B00904021010F68213C0108003D
-:10286000AC2E046C3C010800AC2D04680A0002691F
-:102870008F8D00188F9900401499FF5D0000602132
-:102880003C0508008CA5046C3C1008008E10046800
-:1028900000E82021248EFFFE00AEF82103EE582B25
-:1028A000020C5021014B18213C010800AC3F046C84
-:1028B0003C010800AC2304680A00048B24EB0008E8
-:1028C0008F8800383C02FFFF8D0E000C01C2682487
-:1028D00001A46025AD0C000C0A00037930CFFFFF86
-:1028E0000A0003A9AE000000974B01049204000403
-:1028F0008E2A000C01644021251FFFF20147182495
-:1029000033F9FFFF0079C025AE38000C0A0002D46D
-:102910008E1900103C03FFFF8D11001002232824A4
-:1029200000A47825AD0F00100A00037930CFFFFF17
-:1029300097450104920600048E2F001000A6102176
-:102940002449FFEE01E76824312EFFFF01AE602528
-:10295000AE2C00100A0002D48E1900108E06000C56
-:10296000AE0000000003C080031088210A0002A608
-:10297000AE2600201460000D3050FFFF3C04FFFF26
-:102980000044602401846826000D582B000C502B55
-:10299000014B102410400002000000000000000D58
-:1029A0008CA300000A00023E006410253A11FFFFCC
-:1029B0000011782B0010702B01CF20241080000212
-:1029C000000000000000000D8CB800000A00023E6C
-:1029D0003702FFFF3084FFFF30A5FFFF10800007A4
-:1029E0000000182130820001104000020004204243
-:1029F000006518211480FFFB0005284003E0000853
-:102A00000060102110C00007000000008CA2000030
-:102A100024C6FFFF24A50004AC82000014C0FFFB05
-:102A20002484000403E000080000000010A0000857
-:102A300024A3FFFFAC86000000000000000000009F
-:102A40002402FFFF2463FFFF1462FFFA24840004C2
-:102A500003E0000800000000308EFFFF30D8FFFFC9
-:102A600000057C0001F8602539CDFFFF01AC502145
-:102A7000014C582B014B4821000944023127FFFF2C
-:102A800000E830210006240230C5FFFF00A4182111
-:102A90003862FFFF03E000083042FFFF3C0C0800F3
-:102AA0008D8C0484240BFF8027BDFFD0018450212E
-:102AB000014B4824AF4900203C0808008D080484DD
-:102AC000AFB20020AFB00018AFBF0028AFB30024F2
-:102AD000AFB1001C936600040104382130E4007F8C
-:102AE000009A10213C0300080043902130C50020CB
-:102AF000036080213C080111277B000814A000021C
-:102B0000264600702646006C92130004975101047B
-:102B1000920F00043267000F322EFFFF31ED0040AC
-:102B200001C7282311A0000500004821925900BCCC
-:102B3000333800041700009000000000924300BCEE
-:102B4000307F000413E0000F0000000010A0000D13
-:102B500000000000960E0002240AFF8000A76021FA
-:102B600025CDFFFEA74D1016920B0004014B20242B
-:102B7000308200FF10400085010C40253C0F04000E
-:102B8000010F40258F5301780660FFFE2404000AE0
-:102B9000A7440140960D00022404000931AC00074F
-:102BA000000C5823316A0007A74A0142960200022E
-:102BB0002443FFFEA7430144A7400146975F010459
-:102BC000A75F01488F5901083338002053000001E6
-:102BD00024040001920F000431EE001015C0000221
-:102BE0003483001000801821A743014A0000000030
-:102BF000000000000000000000000000AF481000CE
-:102C000000000000000000000000000000000000C4
-:102C10008F5110000621FFFE3113FFFF12600003E9
-:102C2000000000008F481018ACC800009603000692
-:102C3000307FFFFF27F90002001998820013888077
-:102C4000023B30218CD800001520005700183402B8
-:102C5000920300042405FF8000A3F82433F100FF51
-:102C60001220002C00000000924700BC30F200024D
-:102C70001240002800000000974B100C2562FFFE58
-:102C8000A7421016000000003C0A0400354900303D
-:102C9000AF4910000000000000000000000000002C
-:102CA000000000008F4C10000581FFFE00000000B6
-:102CB0009749100C8F51101C00C020213127FFFFB5
-:102CC00024F20030001218820003288000BBF82193
-:102CD0003226FFFFAFF100000E00059500112C0217
-:102CE0000013C880033B98218E7800000002740016
-:102CF000AFB800108FA80010310FFFFFAFAF00106A
-:102D00008FA4001001C46825AFAD00108FA600107D
-:102D1000AE66000097730008976D000A9766000C76
-:102D20008F8A003C000D5C0030CCFFFF3262FFFF59
-:102D3000104A0036016C2025960600023C10100057
-:102D400024D300080E0001393264FFFF974C0104C0
-:102D50000E0001473184FFFFAF5001788FBF00287C
-:102D60008FB300248FB200208FB1001C8FB00018E9
-:102D700003E0000827BD003010A0FF700000000035
-:102D800024A5FFFC0A0005CE240900048CD1000014
-:102D9000AF5110188F5301780660FF7A2404000A9F
-:102DA0000A0005E30000000000A7C8218F88003852
-:102DB0008F4E101C0019C0820018788001E8202175
-:102DC000AC8E0000000E2C0200C020210E000595E4
-:102DD00031C6FFFF023B28218CAD000000025400E9
-:102DE00000403021AFAD00108FAC0010318BFFFFE1
-:102DF000AFAB00108FA2001001424825AFA9001010
-:102E00008FA700100A000613ACA700008F8F0040A8
-:102E1000148FFFC90000000097420104960B0002C6
-:102E20003C0508008CA5046C3049FFFF316AFFFFA8
-:102E30003C1108008E310468012A382124F2FFFE7B
-:102E400000B240210012FFC30112C82B023FC02173
-:102E5000031920213C010800AC28046C3C01080047
-:102E6000AC2404680A00064D0000000000A4102BEA
-:102E700010400009240300010005284000A4102B85
-:102E800004A00003000318405440FFFC0005284044
-:102E900010600007000000000085302B14C0000205
-:102EA00000031842008520231460FFFB0005284220
-:102EB00003E00008008010218F85002C27BDFFE86B
-:102EC000000530272CC300012CA40002008310252C
-:102ED00010400003AFBF00102405007FAF85002C19
-:102EE0000005282730A5FFFF0E000574240426F5F1
-:102EF0008F830030240402BD004030210083382B32
-:102F000010E0000924050001000420400083102B7C
-:102F100004800003000528405440FFFC00042040CA
-:102F200010A0000800C350210064402B15000002CF
-:102F3000000528420064182314A0FFFB000420426F
-:102F400000C350218FBF0010000A4C02312200FF45
-:102F500027BD0018AF8A002C03E00008AF890030BD
-:102F60000A00002600000000000000000000000D24
-:102F7000747870342E362E313600000004061000AE
-:102F80000000000A000001360000EA6000000000B6
-:102F90000000000000000000000000000000000031
-:102FA0000000000000000000000000000000000021
-:102FB0000000000000000000000000000000000011
-:102FC0000000001D000000000000000000000000E4
-:102FD00000000000000000000000000000000000F1
-:102FE00000000000000000000000000000000000E1
-:102FF00000000000000000000000000010000003BE
-:10300000000000000000000D0000000D3C02080060
-:1030100024423AA03C03080024633C54AC40000026
-:103020000043202B1480FFFD244200043C1D0800B7
-:1030300037BD7FFC03A0F0213C100800261000984B
-:103040003C1C0800279C3AA00E000305000000006D
-:103050000000000D8F8300383C08800035070070A9
-:103060008CE50000008330253C02900000C2202542
-:10307000AF850030AF4400208F4900200520FFFEBF
-:103080003C038000346200708C4500008F86003065
-:103090003C1908008F39007C3C0E08008DCE00786A
-:1030A00000A6202303245821000078210164682B06
-:1030B00001CF6021018D50213C010800AC2B007C28
-:1030C0003C010800AC2A007803E000080000000082
-:1030D0000A00003D240400018F8400383C05800074
-:1030E00034A200010082182503E00008AF4300204D
-:1030F00003E00008000010213084FFFF30A5FFFF2F
-:1031000010800007000018213082000110400002EA
-:1031100000042042006518211480FFFB00052840B0
-:1031200003E000080060102110C00007000000004C
-:103130008CA2000024C6FFFF24A50004AC8200007E
-:1031400014C0FFFB2484000403E00008000000001A
-:1031500010A0000824A3FFFFAC86000000000000C0
-:10316000000000002402FFFF2463FFFF1462FFFA47
-:103170002484000403E0000800000000308AFFFF00
-:1031800093A80013A74A014497490E1630C600FFC2
-:103190003C021000A7490146AF450148A346015231
-:1031A000A748015AAF4701608FA400188FA30014ED
-:1031B000A7440158AF43015403E00008AF4201782F
-:1031C00003E00008000000003C038000346200704F
-:1031D0008C4900008F88003C2484000727BDFFF83D
-:1031E0003084FFF8AF890030974D008A31ACFFFF83
-:1031F000AFAC00008FAB0000016850232547FFFFF4
-:1032000030E61FFF00C4282B14A0FFF73C0C800001
-:10321000358B00708D6A00003C0708008CE7008445
-:103220003C0608008CC60080000810820149182363
-:103230000002788000E370210000202101C3C82B28
-:1032400000C4C02101FA4021031948212502400091
-:1032500027BD00083C010800AC2E00843C0108009A
-:10326000AC29008003E00008000000008F82003CD1
-:103270002486000730C5FFF800A2182130641FFF24
-:1032800003E00008AF84003C3C0E20FF27BDFFE0B8
-:103290003C1A80003C0F800835CDFFFDAFBF001801
-:1032A000AFB10014AFB00010AF8F0044AF4D0E00AF
-:1032B000000000000000000000000000000000000E
-:1032C000000000003C0C00FF358BFFFDAF4B0E00F3
-:1032D0003C0660048CC95000240AFF7F3C1160004A
-:1032E000012A40243507380CACC750008E2404381E
-:1032F00024050009AF4500083083FFFF38622F71B5
-:103300002450C0B3AF80004C0E000064AF80003C7E
-:1033100052000001AE20442C0E00046000000000AA
-:103320008FBF00188FB100148FB000100A000E7705
-:1033300027BD002027BDFFD0AFB20028AFB10024C9
-:10334000AFBF002CAFB00020936200080080902136
-:1033500000A088211440002D240400100E00009AC3
-:10336000000000008F8E004C3C10320031C600FF80
-:1033700000067C0001F0602525CD0001AF8D004CDA
-:10338000AC4C0000936B00099369000A316A00FF9E
-:10339000000A3C00312800FF00E82025AC4400046E
-:1033A0008F83004C06400043AC430008AC40000C47
-:1033B000979800403305000814A000022628000654
-:1033C0002628000297420E148F450E1C8F670004BA
-:1033D000937F00023044FFFF33F900FFAFB90010C4
-:1033E0008F710014AFA800180E000087AFB1001451
-:1033F0008FBF002C8FB200288FB100248FB0002027
-:10340000240400100A0000C327BD0030936900099E
-:103410009368000B312300FF310200FF006280211E
-:10342000261F000A33F0FFFF0E00009A0200202141
-:103430008F86004C3C0D410024D90001AF99004C0F
-:103440009378000930C600FF00067400330500FFC2
-:1034500024AF000201CF6025018D5825AC4B000040
-:103460008F6A000C97440E1401523825AC470004B3
-:103470008F450E1C8F670004936900023084FFFFA4
-:10348000312800FFAFA800108F630014AFB10018FF
-:103490000E000087AFA30014020020218FBF002C74
-:1034A0008FB200288FB100248FB000200A0000C323
-:1034B00027BD00303C1280000A000114AC52000C01
-:1034C00027BDFFD8AFB3001CAFBF0020AFB20018BC
-:1034D000AFB10014AFB00010936200081440008137
-:1034E00000809821AF60000C9785004030A4400018
-:1034F0001080008B2403001624104007A363000AE9
-:10350000AF700014938F00428F6C001431EE0007EF
-:10351000000E6A40018D5825AF6B0014978A004059
-:103520008F6800143149001001093825AF67001475
-:103530009786004030C300085060008D00002821AD
-:103540008F6600143C0310003C02810000C3282554
-:10355000AF65001497440E0A2418000E3405FFFCD2
-:10356000309FFFFF03E2C825AF790004A378000273
-:103570009372000A26510004A371000A9783004049
-:103580009364000A30661F00000611830044F8218E
-:1035900027F90028A379000997580E0CA778001086
-:1035A0009372000926510002323000070010782380
-:1035B00031EE0007A36E000B936D0009976C0010AD
-:1035C0008F9000349789004031AB00FF016C50218F
-:1035D000014540213127004010E000053105FFFF83
-:1035E00000B0382B3C06800010E000140000882159
-:1035F0000205402B15000033000020218F4A0E14D5
-:10360000AF4A0E108F490E1CAF490E18AF450E0081
-:103610008F4C0000318B00081160FFFD000000009E
-:10362000974D0E0800A0802100003021A78D00409A
-:103630008F450E0424110001AF850034976E0010F1
-:1036400031D2FFFF8E640000009010231440000967
-:10365000AE6200008F6A00148F8700483549004031
-:10366000AF6900148F480E10ACE800208F430E188D
-:10367000ACE3002400C020210E0000F50200282148
-:103680008E66000014C00005000000008F6B00145F
-:10369000240CFFBF016C9824AF7300148F6D000CD5
-:1036A00001B22821AF65000C937200081640000398
-:1036B000000000001620003100000000A371000887
-:1036C000020020218FBF00208FB3001C8FB2001892
-:1036D0008FB100148FB000100080102103E00008AB
-:1036E00027BD00288F900034979100403C06800051
-:1036F00002009021322F004015E0FFD20000882107
-:10370000977F00108F98003433F9FFFF1738FFEDD3
-:1037100000002021000030210A0001B9241100011D
-:103720002403000E24104007A363000AAF700014A6
-:10373000938F00428F6C001431EE0007000E6A4038
-:10374000018D5825AF6B0014978A00408F680014D4
-:103750003149001001093825AF67001497860040F1
-:1037600030C300081460FF7600000000000028212C
-:10377000AF6000040A000187A36000028F6F00148D
-:103780003C19EFFF3738FFFE01F870240A0001D71B
-:10379000AF6E00148F8700388F8A004427BDFFE08A
-:1037A0008F860048AFB00018AFBF001C8F450104E2
-:1037B0008D4900ACAF4700808CC8002000A9382399
-:1037C00000008021AF480E108F440E1000004821E9
-:1037D000AF440E148CC20024AF420E188F430E1853
-:1037E000AF430E1C10E000362D390001936B00082A
-:1037F0001160004F00000000976E001031CDFFFFF8
-:1038000000ED602B1580004A000000009778001042
-:10381000330FFFFFAF4F0E008F5F000033F900083A
-:103820001320FFFD0000000097420E088F460E0493
-:103830003045FFFF30A300011060008A0000000047
-:103840000000000D30A8A040240400401104003BFB
-:1038500030A9A0001120008500000000936C000832
-:103860005180000927A40010976F001031EEFFFF70
-:1038700000CE682B11A0000427A4001030B800402F
-:103880001300007A00000000AFA70010A7850040D9
-:10389000AF8600340E0001580000000000404821AF
-:1038A0001440FFD08FA700108F420E148F84004861
-:1038B000AC8200208F470E1CAC8700242D390001FC
-:1038C0000330302510C000178FBF001C8F840038D4
-:1038D00024100F0010900085000000008F4F017829
-:1038E00005E0FFFE24180F001098006F0000000094
-:1038F0008F470E14240202403C101000AF470144D1
-:103900008F490E1CAF490148A3400152A740015AFC
-:10391000AF400160A7400158AF420154AF50017859
-:103920008FBF001C8FB0001803E0000827BD0020E7
-:10393000AF470E000A00022E000000008F490178F8
-:103940000520FFFE240A08008F84003CAF4A01785E
-:103950009758008A330FFFFF01E4702325CDFFFF46
-:1039600031AC1FFF2D8B00081560FFF9000000002F
-:103970008F83004C8F9F003800C0482103442021D2
-:103980002466000124190F00AF86004C306A00FF46
-:1039900000E938232486400013F9000524080001BB
-:1039A000938B004231680007000812403448000140
-:1039B000000A7C003C18010001F87025AC8E400024
-:1039C0008F8D004C30AC003630A40008ACCD000424
-:1039D0001080002E010C3025974D0E0A8F8C003C74
-:1039E0003C02810031A4FFFF258B000800824025A6
-:1039F0003C03100031651FFF25390006241F000E0F
-:103A0000AF48016000C33025A75F015AAF85003C75
-:103A1000A759015814E0000A8F9F003824050F00B1
-:103A200053E500022410000134C600408F430E10FD
-:103A30008F880048AD0300208F4B0E18AD0B00247B
-:103A40008F420E14AF4201448F440E1CAF44014814
-:103A5000A34A01523C0A1000AF4601540A00022159
-:103A6000AF4A017814C0FF7830A8A0408F420E14EE
-:103A70008F84004800004821AC8200208F470E1C34
-:103A8000AC8700240A0002582D3900018F98003CB1
-:103A900025390002A7590158270F000831EE1FFFF2
-:103AA0000A0002ADAF8E003CAF40014C1120002C4B
-:103AB000000000008F460E10AF4601448F430E18E1
-:103AC000240200403C101000AF430148A3400152C3
-:103AD000A740015AAF400160A7400158AF420154CE
-:103AE000AF5001780A0002718FBF001C1120000640
-:103AF00000000000975F0E0833E5004014A00002AC
-:103B0000000000000000000D8F4801780500FFFE56
-:103B100000000000974E0E103C0D0500240320000D
-:103B200031CCFFFF018D1025AF42014C8F440E14A4
-:103B30003C0B1000AF4401448F4A0E1CAF4A0148B1
-:103B4000A34001528F840038A740015AAF40016062
-:103B5000A7400158AF4301540A00025FAF4B017800
-:103B60008F590E14AF5901448F430E1C0A0002D91D
-:103B70002402004027BDFFE0AFB20018AFB100142F
-:103B8000AFB00010AFBF001C0E0000CA0000000064
-:103B90003C0280008F8A0044345000703C120800C0
-:103BA00026523B70020088218E0800008F450000DD
-:103BB00038A400013083000110600017AF88003086
-:103BC000022048218D2C00003C0208008C42006C31
-:103BD0003C1808008F1800680188182300436821EA
-:103BE0000000C82101A3782B0319702101CF4021C7
-:103BF0003C010800AC2D006C3C010800AC280068BA
-:103C00008F4B00003967000130E6000114C0FFED62
-:103C100001804021AF8C00308E1800003C0E08005F
-:103C20008DCE006C3C0C08008D8C00680308782356
-:103C300001CF28210000402100AF302B01885821FE
-:103C4000016620213C010800AC25006C3C01080005
-:103C5000AC2400688F49010025470088AF870048E1
-:103C6000AF890038AF4900208E070000AF870030D1
-:103C70008F5901780720FFFE000000008E0F000022
-:103C80003C0D08008DAD00743C0C08008D8C00705C
-:103C900001E7702301AE28210000302100AE582B2F
-:103CA00001862021008B3821240908003C010800EE
-:103CB000AC2500743C010800AC270070AF490178C6
-:103CC00093430108A383004293820042305F0001C6
-:103CD00017E000158F830038241F0D00107F001996
-:103CE00024020F001062001D000000009147000038
-:103CF0002403005030E900FF112300043C0540007C
-:103D0000AF4501380A000312000000000E0008DA77
-:103D1000000000008F8A00443C054000AF45013898
-:103D20000A00031200000000939900423338000695
-:103D3000001851000E00020D0152D8210A00036E36
-:103D40008F8A00443C1B0800277B3BF00E00020DCD
-:103D5000000000000A00036E8F8A00443C1B08002C
-:103D6000277B3C100E00020D000000000A00036ECD
-:103D70008F8A004490AA00018FAB00108CAC001019
-:103D80003C0300FF8D680004AD6C00208CAD001476
-:103D900000E060213462FFFFAD6D00248CA70018A5
-:103DA0003C09FF000109C024AD6700288CAE001C4F
-:103DB0000182C82403197825AD6F0004AD6E002C74
-:103DC0008CAD0008314A00FFAD6D001C94A90002C3
-:103DD0003128FFFFAD68001090A70000A560000229
-:103DE000A1600004A167000090A30002306200FF00
-:103DF0000002198210600005240500011065000E04
-:103E00000000000003E00008A16A00018CD800282F
-:103E1000354A0080AD7800188CCF0014AD6F0014C7
-:103E20008CCE0030AD6E00088CC4002CA16A00015D
-:103E300003E00008AD64000C8CCD001CAD6D0018D3
-:103E40008CC90014AD6900148CC80024AD6800084A
-:103E50008CC70020AD67000C8CC200148C830064FA
-:103E60000043C82B13200007000000008CC2001480
-:103E7000144CFFE400000000354A008003E0000815
-:103E8000A16A00018C8200640A0003C400000000E3
-:103E900090AA000027BDFFF88FA9001CA3AA00006C
-:103EA0008FAE00003C0FFF808FA8001835E2FFFFA7
-:103EB0008CCD002C01C26024AFAC0000A120000416
-:103EC00000E06021A7A000028FB800008D27000449
-:103ED0000188182100A0582100C05021006D28261B
-:103EE0003C06FF7F3C0F00FF2CAD000135EEFFFFCD
-:103EF00034D9FFFF3C02FF0003193024000D1DC020
-:103F0000010EC82400E2C02400C3702503197825DF
-:103F1000AD2E0000AD2F00048D450024AFAE000093
-:103F2000AD2500088D4D00202405FFFFAD2D000CB0
-:103F3000956800023107FFFFAD2700109166001859
-:103F400030C200FF000219C2506000018D450034EC
-:103F5000AD2500148D67000827BD0008AD27001CA3
-:103F60008C8B00CCAD2C0028AD20002CAD2B002478
-:103F7000AD20001803E00008AD20002027BDFFE0C1
-:103F8000AFB20018AFB10014AFB00010AFBF001C4B
-:103F90009098000000C088213C0D00FF330F007F87
-:103FA000A0CF0000908E000135ACFFFF3C0AFF005F
-:103FB000A0CE000194A6001EA22000048CAB001429
-:103FC0008E29000400A08021016C2824012A4024AD
-:103FD0000080902101052025A6260002AE240004C1
-:103FE00026050020262400080E0000722406000288
-:103FF00092470000260500282624001400071E0012
-:104000000003160324060004044000032403FFFFFA
-:10401000965900023323FFFF0E000072AE230010FA
-:10402000262400248FBF001C8FB200188FB100140B
-:104030008FB0001024050003000030210A00007C2E
-:1040400027BD002027BDFFD8AFB1001CAFB00018BE
-:10405000AFBF002090A80000240200018FB0003CF8
-:104060003103003F00808821106200148FAA0038BD
-:10407000240B0005506B0016AFAA001000A02021F1
-:1040800000C028210E00040702003021922400BC49
-:10409000308300021060000326060030ACC0000030
-:1040A00024C600048FBF00208FB1001C8FB0001801
-:1040B00000C0102103E0000827BD0028014038217E
-:1040C0000E000385AFB000100A00044B0000000092
-:1040D0000E0003CCAFB000140A00044B0000000037
-:1040E0003C02000A034218213C04080024843B08D7
-:1040F0002405001A000030210A00007CAF83002C48
-:104100003C038000346200708C48000000A05821FD
-:1041100000C04821308A00FFAF8800308F4401780A
-:104120000480FFFE3C0C8000358600708CC50000CA
-:104130003C0308008C6300743C1808008F18007062
-:1041400000A82023006468210000C82101A4782B66
-:104150000319702101CF60213C010800AC2D0074CF
-:104160003C010800AC2C00708F480E14AF4801448D
-:10417000AF47014CA34A0152A74B0158934601088F
-:1041800030C5000854A0000135291000934B0900E8
-:1041900024070050316A00FF1147000700000000AB
-:1041A0008F450E1CAF450148AF4901543C09100032
-:1041B00003E00008AF490178934D010831A80008D9
-:1041C0001100001000000000934F010831EE0010B4
-:1041D00051C00001352900083C04080090843B6C64
-:1041E000A34401508F4309A4AF4301488F4209A063
-:1041F000AF420144AF4901543C09100003E00008FC
-:10420000AF4901783C1908008F393B283338000842
-:104210005700FFF1352900080A00049E0000000045
-:1042200024070040AF470814AF4008108F420944EC
-:104230008F4309508F4409548F45095C8F46094CC0
-:10424000AF820064AF830054AF840050AF85005C40
-:1042500003E00008AF8600609346010930C5007F87
-:10426000000518C0000521400083102103E000086C
-:10427000244200883C0A0800914A3B2D3C09080072
-:1042800095293B263C051100000A3C002528000228
-:1042900000E8302500C5182524820008AC83000002
-:1042A00003E00008AC8000048F4A002C974D0908F9
-:1042B0003C0E000E034E382131ACFFFF000C41C014
-:1042C000AF48002C9743090894EB001A0080402166
-:1042D000240200013169FFFFAC8900008CE6001C5C
-:1042E00000A05821AC8600048CE40020AD04000836
-:1042F00090E30019306300031062003E00000000EC
-:104300002865000214A00071240F0002106F004CF9
-:104310000000000024180003107800550000000081
-:104320003C09080095293B1C93430934934F09210C
-:104330003C05080094A53B22306400FF94EE002A5F
-:104340000004688231EC00FF978F0058000DC60012
-:10435000000CCC003127FFFF0319102500A73021E6
-:104360000046202501CF68213C03400000836025E2
-:10437000000D4C00AD090004AD0C0000935909205C
-:104380003C1800062509001400193E0000F82825F5
-:10439000AD0500088F4E092C25E6000130C27FFFD5
-:1043A000AD0E000C8F440930A7820058250200286A
-:1043B000AD0400108F4D0938AD0D0014AD2B000475
-:1043C0008F4C0940AD2C0008934309373C19080075
-:1043D00093393B2CAD200010000347000019C400A6
-:1043E000011858253567FFFFAD27000C03E00008D2
-:1043F000AF4A002C3C09080095293B1C3C0D0800E5
-:1044000095AD3B263C0C0800958C3B1894E40024A9
-:10441000312EFFFF01AE302100CC18230004CC0068
-:104420002462FFF20322C025240F0800AD18000CFF
-:10443000AD0F0014AD0000100A0004F225080018AA
-:1044400094E5002494EE00283C09080095293B1CC3
-:1044500000056C00000E640035A68100358408005C
-:10446000AD06000CAD0400100A0004F2250800148B
-:104470003C09080095293B1C3C0F080095EF3B26A2
-:104480003C06080094C63B1894E400243125FFFF45
-:1044900094ED002801E5702101C660230004CC00E2
-:1044A000000D1C002582FFEE006278253738810060
-:1044B00024050800AD18000CAD0F0010AD05001864
-:1044C000AD0000140A0004F22508001C1460FF94DB
-:1044D0000000000094E300243C09080095293B1CDF
-:1044E0000003140034590800AD19000C0A0004F24E
-:1044F0002508001003E00008240201F427BDFFE8AE
-:10450000AFB00010AFBF00140E00005C008080212F
-:1045100024050040AF4508148F8300548F84005059
-:104520008F85005C0070182100641023184000047F
-:10453000AF830054AF6300548F660054AF860050C1
-:104540001200000C000000008F440074936800818A
-:104550003409FA002D07000710E00005008910213A
-:10456000936C0081240B01F4018B50040144102151
-:10457000AF62000C8F4E095C01C5682319A00004CE
-:104580008FBF00148F4F095CAF8F005C8FBF00148A
-:104590008FB000100A00005E27BD00188F840064F1
-:1045A0008F8300548F820050AF640044AF6300508B
-:1045B00003E00008AF6200543C03800034620070E6
-:1045C0008C43000027BDFFF8308700FF30A900FFB3
-:1045D00030C800FFAF8300308F4401780480FFFEB5
-:1045E0003C028000345900708F380000A3A70003FC
-:1045F0003C0708008CE700748FAC00003C06080004
-:104600008CC60070030378233C0E7FFF00EFC821A7
-:1046100035CDFFFF00005021018D282400CA18214C
-:10462000000847C0032F202B00A810250064C021DC
-:10463000AFA200003C010800AC3900743C01080046
-:10464000AC380070934F010AA3A000023C0E80FF1B
-:10465000A3AF00018FAC0000312B007F35CDFFFFF1
-:10466000018D4824000B5600012A40252407300004
-:104670002406FF803C05100027BD0008AF48014C10
-:10468000AF470154A7400158A346015203E0000878
-:10469000AF45017827BDFFE8AFBF0014AFB00010F1
-:1046A0008F6500743C068000309000FF00A6202536
-:1046B0000E00005CAF640074936300053462000870
-:1046C0000E00005EA3620005020020218FBF0014CF
-:1046D0008FB0001024050005240600010A0005968D
-:1046E00027BD001827BDFFE03C038000AFB00010DD
-:1046F000AFBF0018AFB10014346200708C470000E7
-:10470000309000FF30A800FFAF8700308F44017861
-:104710000480FFFE3C188000371100708E2F0000CF
-:104720003C0D08008DAD00743C0A08008D4A0070F5
-:1047300001E7702301AE28210000582100AE302B84
-:10474000014B4821012638213C010800AC250074AA
-:10475000000088213C010800AC2700701100000F08
-:10476000000000008F6200742619FFFF3208007FEE
-:104770000002FE0233E5007F15000006332200FF31
-:104780002407FF800207202624A3FFFF0083802543
-:10479000320200FF00408021241110080E00005C4E
-:1047A000000000008F4908183125000414A0FFFD07
-:1047B0003218007F001878C00018714001CF6821BE
-:1047C00025AC0088AF4C0818274A09808D4B002083
-:1047D000AF4B01448D460024AF460148A350015021
-:1047E0000E00005EA7400158022010218FBF001864
-:1047F0008FB100148FB0001003E0000827BD002027
-:1048000027BDFFE8308400FFAFBF00100E0005E1B8
-:1048100030A500FF8F8300548FBF00103445004047
-:104820002404FF903C02100027BD0018AF43014C48
-:10483000A3440152AF45015403E00008AF420178A0
-:1048400027BDFFE8AFBF0014AFB000109345093F8C
-:10485000240200063C08080095083B2230A300FF14
-:104860002487FFD8240500041062003624060002C5
-:10487000974E093C3C0D02040006340031CCFFFF8A
-:10488000018D5825AC8B0000934A093E3149002028
-:104890001120000800000000935F09363C19010355
-:1048A0003738030033F000FF02187825240500088C
-:1048B000AC8F000493580934934D09213C104000FB
-:1048C000330E00FF000E608231AB00FF000C56007B
-:1048D000000B1400014218250068F82503F0C825D4
-:1048E000AC99FFD8935809378F4C09488F4D094030
-:1048F00000057882330E00FF01CF5821018D282357
-:10490000000B57000146102530A3FFFF0043402550
-:10491000000F488001273021ACE800200E00005C29
-:1049200024D00028240400040E00005EA364003F8D
-:10493000020010218FBF00148FB0001003E00008A8
-:1049400027BD00180A0006442406001227BDFFD028
-:1049500024090010AFB50024AFB40020AFB3001C91
-:10496000AFB10014AFB000103C010800A0293B2CEF
-:10497000AFBF0028AFB2001897480908309400FF75
-:104980003C02000E3107FFFF000731C0AF46002C8C
-:10499000974409089344010B30B300FF0342802180
-:1049A000308300300000A821106000E4000088215E
-:1049B000240C00043C010800A02C3B2C934B093E26
-:1049C000000B5600000A2E0304A001310000000075
-:1049D000AF4000489352010B324F002011E0000617
-:1049E00000000000935F093E001FCE000019C603BF
-:1049F00007000148000000009346010B30C2004050
-:104A0000104000038F9200548F87005424F2FFFF60
-:104A1000960A002C9345093493490937A78A005810
-:104A200030A600FF312700FF00071080004620213C
-:104A30000091F8213C010800A43F3B22920300189A
-:104A40003C010800A4203B1C3C010800A4203B18AA
-:104A5000307000FF03F04021250B000A3170FFFF8A
-:104A60003C010800A4283B243C010800A4283B2664
-:104A70000E00009A020020210E0004C500402021F3
-:104A80008F4B002C975809083C19000E0359402100
-:104A9000330FFFFF000F71C0AF4E002C9743090882
-:104AA000950D001A241100010040382131ACFFFFA0
-:104AB000AC4C00008D0A001CAC4A00048D0500209F
-:104AC000AC4500089109001931230003107100BDA5
-:104AD0002871000216200103240C0002106C00F55E
-:104AE000240D0003106D00CA000000003C090800FE
-:104AF00095293B1C93430934935809213C0A08002B
-:104B0000954A3B22306400FF950C002A0004F8828D
-:104B1000331900FF97980058001F760000197C0099
-:104B20003126FFFF01CF402501466821010D882570
-:104B3000019828213C0840000228102500054C005F
-:104B4000ACE90004ACE20000934309203C040006F9
-:104B500024E900140003FE0003E4C825ACF90008B2
-:104B60008F4E092C270F000131E67FFFACEE000CC1
-:104B70008F4D0930A786005824E60028ACED0010C0
-:104B80008F4C0938ACEC0014AD3200048F51094051
-:104B9000AD310008934209373C05080090A53B2C35
-:104BA000AD2000100002270000051C000083F8253E
-:104BB00037F2FFFFAD32000CAF4B002C12A00033D8
-:104BC000000000009352093F24150006240500044C
-:104BD000324B00FF117500CD24090002974F093CAC
-:104BE0003C0E020431EDFFFF01AE6025ACEC002865
-:104BF0009351093E322200201040000800000000BE
-:104C0000934409363C180103371F0300309900FF15
-:104C1000033F2825ACC5000424050008935209343D
-:104C20009343092100056082324B00FF000BA882EC
-:104C3000306400FF0015FE000004C40003F8C8251E
-:104C4000032A782501E87025ACCEFFD8934D0937AB
-:104C50008F5209488F42094031B100FF022C582180
-:104C600002423023000B1F000009AC0000754825EC
-:104C700030C8FFFF012850250E00005CACEA002080
-:104C8000240700040E00005EA367003F0E0000C36F
-:104C9000020020213C05080090A53B2C30B0000309
-:104CA0001200000F028020218F8800542509000186
-:104CB000AF890054AF6900508F6A0054014938230E
-:104CC00018E00002012020218F640054AF640054DA
-:104CD0008F420074244601F4AF66000C028020214C
-:104CE00002602821A76000680E0005E13C13100057
-:104CF0008F8E005434540006AF4E014C8F8D004C03
-:104D00008FBF00288FB5002431B100FF25AC000112
-:104D1000AF8C004C8FB20018A35101528FB000101D
-:104D2000AF5401548FB10014AF5301788FB40020F9
-:104D30008FB3001C03E0000827BD00309359093EE3
-:104D40000019C6000018960306420048241100020C
-:104D500093420923304400021080FF1E8F870060B9
-:104D60008F86005414E6FF1B000000000E00005C5C
-:104D7000000000009365003F2408001630A900FFE2
-:104D80001128000C240A00083C0D080091AD3B2CB2
-:104D900035AC00013C010800A02C3B2C936B003F7C
-:104DA000316300FF106A0065240E000A106E005E79
-:104DB0002402000C0E00005E000000000A00069DA8
-:104DC000000000003C09080095293B1C3C19080024
-:104DD00097393B263C18080097183B18950E00247D
-:104DE000313FFFFF033F782101F86823000E8C005C
-:104DF00025ACFFF2022C502524050800244700189A
-:104E0000AC4A000CAC4500140A0006E5AC400010AA
-:104E10003C09080095293B1C3C18080097183B26C4
-:104E20003C0F080095EF3B18950D00243139FFFF2A
-:104E3000950C00280319702101CF8823000D2C0048
-:104E4000000C54002622FFEE0142302534A48100DC
-:104E500024030800ACE4000CACE60010ACE300183E
-:104E6000ACE000140A0006E524E7001C3C01080041
-:104E7000A0313B2C9343093E24150001307F0020D4
-:104E800017E0FED4241100080A00069D2411000436
-:104E90008F6E00848F4D094011A0FECDAF8E00545F
-:104EA000240F00143C010800A02F3B2C0A00069C94
-:104EB0000000000095020024950600283C09080027
-:104EC00095293B1C0002240000061C00349F810031
-:104ED00034790800ACFF000CACF900100A0006E5BC
-:104EE00024E700141460FF0100000000951800245E
-:104EF0003C09080095293B1C2447001000187C0041
-:104F000035EE08000A0006E5AC4E000C0A00071F4B
-:104F1000240900128F64004CAF6400548F63005466
-:104F20000A0006A6AF630050A362003F0E00005EB9
-:104F3000000000000A00069D00000000240200148A
-:104F40000A0007F3A362003F27BDFFE8308400FF9B
-:104F5000AFBF00100E0005E130A500FF9378007E82
-:104F60009379007F936E00809368007A332F00FF5F
-:104F700000186600000F6C0031CB00FF018D482542
-:104F8000000B52008FBF0010012A3825310600FFA8
-:104F90003444700000E628252402FF813C03100001
-:104FA00027BD0018AF45014CAF440154A342015244
-:104FB00003E00008AF43017827BDFFD8AFB2001867
-:104FC000AFB10014AFB00010AFBF0020AFB3001CF2
-:104FD00093420109308600FF30B000FF000618C27E
-:104FE000320400023071000114800005305200FFCD
-:104FF0009367000530E5000810A0000D30C80010D0
-:10500000024020210E0005CD0220282124040001A9
-:105010008FBF00208FB3001C8FB200188FB1001417
-:105020008FB000100080102103E0000827BD002889
-:105030001500003200000000934301090000282100
-:105040003062007F000220C00002F94003E4982192
-:1050500026790088033B98218E7800248E6F000803
-:10506000130F0046000000008F6400842418000223
-:105070000004FD8233F900031338007C00000000B7
-:1050800093660083934A0109514600043205007C6F
-:1050900010A00060000000003205007C14A0005346
-:1050A0000240202116200006320400018E7F0024D9
-:1050B0008F59010417F9FFD60000202132040001A6
-:1050C0001080000A024020218F4209408F93006423
-:1050D00010530006000000000E00067B022028216D
-:1050E0008F430940AF630044024020210E00062890
-:1050F000022028210A00082C240400013C09080091
-:105100008D290064252600013C010800AC260064BE
-:1051100016000012000000008F6D00843C0E00C0DD
-:1051200001AE602415800005024020210E0007FA20
-:10513000022028210A00082C240400012405000470
-:105140000E00059624060001024020210E0007FAF9
-:10515000022028210A00082C240400010E00003D32
-:1051600024040001936B007D020B50250E00005EAD
-:10517000A36A007D0A00086F8F6D00848F6600743B
-:105180008F4801048E67002400064E021507FFB603
-:105190003126007F936B008326440001308A007F14
-:1051A00011460043316300FF5464FFB08F640084F4
-:1051B0002645000130B1007F30A200FF1226000416
-:1051C00024050001004090210A000842241100013A
-:1051D000240FFF80024F702401CF9026324200FF3F
-:1051E000004090210A000842241100010E00067BB5
-:1051F00002202821321800301300FFAA321000824A
-:10520000024020210E0005CD022028210A00082C92
-:10521000240400018F6E00743C0F800024050003FD
-:1052200001CF9025AF7200749371008324060001B2
-:105230000E000596322400FF0E00003D24040001FC
-:10524000936D007D020D60250E00005EA36C007D55
-:105250003C0B08008D6B0054257000013C010800D8
-:10526000AC3000540A00082C240400018F6800743C
-:105270003C0980002405000401093825AF6700744B
-:1052800093630083240600010E000596306400FF3E
-:105290000E00003D240400019362007D0202982567
-:1052A0000E00005EA373007D0A00082C2404000198
-:1052B000324D008039AC0080546CFF6C8F640084E8
-:1052C0000A0008952645000127BDFFD03C0A0008CA
-:1052D000AFBF002CAFB40028AFB30024AFB20020A2
-:1052E000AFB1001CAFB00018034AD8212409004018
-:1052F000AF490814AF4008108F4209448F4309504A
-:105300008F4609548F47095C8F48094C9344010824
-:105310009345010BAF820064308400FF30A500FF8D
-:10532000AF830054AF860050AF87005C0E000816B4
-:10533000AF8800601440015A8FBF002CA76000683E
-:10534000934D0900240B00503C14080026943C3077
-:1053500031AC00FF3C12080026523C40118B000388
-:10536000000000000000A02100009021934F0109DF
-:105370008F8800542402001031F1007F001170C0AA
-:105380000011694001AE282124B80088AF580818E0
-:105390008F4A01048F4B09A43C0C000E034CC8211A
-:1053A000014B48233C010800AC293B088F440958B5
-:1053B0003C010800A0223B2C9746090800881823CE
-:1053C0003C010800AC233B0C30C7FFFF0007F9C0CD
-:1053D0003C010800AC283B30AF5F002C9742090825
-:1053E0009730002C8E910000932F0018037898219D
-:1053F000A7900058AF9300480220F80931F000FF51
-:10540000304E000215C0018E30530001126001427F
-:10541000000000008F4F09A4241300013C01080084
-:10542000AC2F3B3493510934934E0937322500FF9A
-:1054300031CD00FF000D60800185502101505821C1
-:105440003C010800A42B3B243C010800A42A3B2279
-:1054500093490934312200FF0202202124900010D8
-:105460003C010800A4303B20240800068F9900541A
-:105470003C010800AC283B288F9F005C8F580958DE
-:105480000000802103F9282304A0013C03192023F4
-:105490000480013A00A4382B10E0013C0000000019
-:1054A0003C010800AC253B0C8E4200000040F8098E
-:1054B000000000003046000214C000DD00408821DA
-:1054C00030430001546000108E4200043C04080088
-:1054D0008C843B103C09C00000898025AF500E0031
-:1054E0008F4B0000316A00081140FFFD00000000F2
-:1054F00097450E0824100001A78500408F4C0E042C
-:10550000AF8C00348E4200040040F8090000000017
-:1055100002228825322D000215A00159000000004A
-:105520003C09080095293B183C06080094C63B241A
-:105530003C04080094843B1A3C1908008F393B1046
-:10554000012658213C1808008F183B343C1F0800E6
-:1055500097FF3B2E016418218F4E09400329282113
-:10556000246F00020319682100BF60213C0108007C
-:10557000A42B3B26AF8E00643C010800AC2D3B34CD
-:105580003C010800A42C3B1C0E00009A31E4FFFFF4
-:105590008F87004C004020213C010800A0273B2DB4
-:1055A0008E42000824E80001AF88004C0040F80952
-:1055B000000000008F4B002C974909083C0A000EA0
-:1055C000034A38213124FFFF000419C08F8A005498
-:1055D000AF43002C9743090894E6001A004040218D
-:1055E00030DFFFFFAC5F00008CF9001CAC590004F9
-:1055F0008CF80020AC58000890EF001931E300034C
-:10560000107300E60000000028620002144001024E
-:10561000240C0002106C00F4240D0003106D00A790
-:10562000000000003C09080095293B1C9345093403
-:10563000934C09213C0F080095EF3B2230BF00FF3F
-:1056400094EE002A001F6882319900FF978C005861
-:10565000000D16000019C4003124FFFF01E43021C1
-:10566000005848250126382501CC28213C0340005C
-:1056700000E3F82500056C00AD0D0004AD1F00002F
-:10568000935909203C180006250D001400197E00CE
-:1056900001F87025AD0E00088F42092C2586000107
-:1056A0008E4C000CAD02000C8F44093030C97FFFD6
-:1056B000A7890058AD0400108F4709382504002839
-:1056C000AD070014ADAA00048F450940ADA5000840
-:1056D000934309373C1F080093FF3B2CADA00010FB
-:1056E0000003C700001FCC000319782535EEFFFF2B
-:1056F000ADAE000CAF4B002C0180F809000000009B
-:105700003C06080094C63B263C02080094423B1A23
-:1057100000C24821252B00020E0000C33164FFFFA8
-:105720003C0808008D083B083C0708008CE73B104C
-:10573000010750233C010800AC2A3B081540000635
-:10574000000000003C0808008D083B28350A004096
-:105750003C010800AC2A3B28120000848F830048DB
-:105760008F470E108F900048AE0700208F4B0E1809
-:10577000AE0B00243C10080096103B1C0E00005C91
-:1057800000000000240F0040AF4F08148F86005423
-:105790008F89005000D018210069702319C00004BF
-:1057A000AF830054AF6300548F640054AF84005043
-:1057B0001200000C000000008F44007493780081F8
-:1057C0003419FA002F020007104000050099182133
-:1057D000937F0081240C01F403EC680401A41821D8
-:1057E000AF63000C8F4A095C8F88005C0148282356
-:1057F00018A00003000000008F50095CAF90005C0F
-:105800000E00005E000000008F8300548E470010E1
-:105810003C010800AC233B3000E0F8090000000028
-:105820003C0B08008D6B3B081560FF102408000638
-:105830008F590024975F09088F8900648F8E005468
-:105840003C0C001F978400588F8F002C8F930050C2
-:1058500033F8FFFF358DFF80032D3024001811C071
-:1058600032320010AF420024A5E4002CAF460024E1
-:10587000AF690044AF6E0050AF7300545640007CD7
-:105880008E850004322A0040554000318E91000878
-:105890008E88000C0100F809000000008FBF002C6A
-:1058A0008FB400288FB300248FB200208FB1001C6A
-:1058B0008FB0001803E0000827BD00303C09080045
-:1058C00095293B1C3C03080094633B263C040800DC
-:1058D00094843B1894F900243125FFFF94F80028A4
-:1058E0000065F82103E478230019640000186C00B7
-:1058F00025EEFFEE01AE302535828100240308003D
-:10590000AD02000CAD060010AD030018AD00001490
-:105910000A0009B32508001C934301098F8600384B
-:1059200000033E0000E64025AF4800808F5F09A0DD
-:105930008F5809A4AFBF0010AF5F0E148FB90010CD
-:10594000AF590E10AF580E1C0A00092DAF580E1893
-:105950000220F809000000008E88000C0100F80900
-:10596000000000000A000A508FBF002CA460002035
-:10597000A47300220A000A05AC7300243C0108004D
-:10598000AC203B0C0A0009538E4200003C01080089
-:10599000AC243B0C0A0009538E4200003C0908006D
-:1059A00095293B1C3C1F080097FF3B263C0508003F
-:1059B00094A53B1894F800243124FFFF03E4C82188
-:1059C0000325782300186C0025EEFFF201AE602558
-:1059D000AC4C000C24020800AD020014AD00001015
-:1059E0000A0009B32508001894E6002494E300286F
-:1059F0003C09080095293B1C000624000003FC001C
-:105A00003485810037F90800AD05000CAD19001090
-:105A10000A0009B3250800141460FF02000000000A
-:105A200094F800243C09080095293B1C00187C00D0
-:105A300035EE0800AD0E000C0A0009B32508001071
-:105A400093520109000028210E000628324400FF6D
-:105A50008FBF002C8FB400288FB300248FB200209A
-:105A60008FB1001C8FB0001803E0000827BD003084
-:105A700000A0F809000000000A000A4A322A00408B
-:105A80001200FF6B000000008F4E0E148F92004832
-:105A9000AE4E00208F530E1C0A000A34AE53002471
-:105AA0008F820018008040213C040100904700854F
-:105AB00030E3002010600009000000003C070800EF
-:105AC0008CE73B308F83001400E320230480000820
-:105AD0009389000014E300030100202103E0000883
-:105AE000008010213C04010003E000080080102128
-:105AF0001120000B006738238F8C001C2409003410
-:105B0000918B00BC316A0002514000012409003031
-:105B100000E9682B15A0FFF10100202100E93823DE
-:105B20002419FFFC00B9C02400F9782400F8702B78
-:105B300015C0FFEA01E8202130C20003000218234B
-:105B400014C00012306900030000302100A9702148
-:105B500001C6682100ED602B1180FFE03C040100CC
-:105B60002D2F00010006482B0105382101E93024C2
-:105B700014C0FFDA24E4FFFC2419FFFC00B9C024A0
-:105B80000308202103E00008008010218F8B001CF7
-:105B900024060004916A00BC314400041480FFEC28
-:105BA00000A970210A000AFC0000302127BDFFE88F
-:105BB000AFBF00108F460100934A01093C1F080047
-:105BC0008FFF00902407FF80314F00FF31E8007FF6
-:105BD0000008614003E6C821032CC02127090120E9
-:105BE000012770243C010800A02F3B6CAF4E080C2D
-:105BF0003C0D08008DAD00903C0400803482000311
-:105C000001A65821016C18212465012030AA0078D2
-:105C100001424025AF48081C3C1F08008FFF009040
-:105C20008F88004403E6C021331900070307482486
-:105C3000033A7821AF49002825E909C0952E0002D2
-:105C40003C0D08008DAD008C3C0A08008D4A009088
-:105C500031CC3FFF01A61821000C5980006B282190
-:105C600000A72024AF44002C952200023C1F08000E
-:105C70008FFF008C9107008530593FFF03E67821A4
-:105C80000019C1800146702101F8682131CC007FE4
-:105C900031AB007F019A2821017A50213C03000C8E
-:105CA0003C04000E00A328210144102130E600200E
-:105CB00027470980AF820028AF880018AF890020ED
-:105CC000AF85001C10C00006AF8700248D02005075
-:105CD0008CA4010C0044302318C0007700000000A1
-:105CE000910C0085240DFFDF018D3824A10700856C
-:105CF0008F8B00188F8900208F8700248D65004CC2
-:105D0000AF850014912F000D31EE002011C0001757
-:105D10000000000024090001A3890000AF800008F2
-:105D20008CE400248F850008240A0008AF8000045A
-:105D3000AF80000C3C010800A42A3B1A3C0108007B
-:105D4000A4203B2E0E000AD0000030218F850020B9
-:105D50008FBF0010AF82001090A8000D27BD001863
-:105D60000008394203E0000830E20001913F0002E0
-:105D70002418000133F900FF00192182109800391E
-:105D8000240800021088005B8F8600288CE5002420
-:105D900014A0001B8F9F001C91220000240A000504
-:105DA0003046003F10CA0047240400018F860004DB
-:105DB000A3840000AF86000CAF8600088CE40024AA
-:105DC0008F850008240A00083C010800A42A3B1A19
-:105DD0003C010800A4203B2E0E000AD00000000069
-:105DE0008F8500208FBF0010AF82001090A8000D9B
-:105DF00027BD00180008394203E0000830E2000126
-:105E00008CF800088CF900248FEE00C4A3800000F9
-:105E10008CE40024AF8E00088F8500088F86000474
-:105E200003197823240A0008AF8F000C3C010800F6
-:105E3000A42A3B1A3C010800A4203B2E0E000AD0E5
-:105E4000000000008F8500208FBF0010AF8200107F
-:105E500090A8000D27BD00180008394203E0000893
-:105E600030E20001912300003062003F104400271F
-:105E70008F85001C8CE400241480002100000000A9
-:105E80008D2E00183C187FFF8F85001C370FFFFFF9
-:105E900001CF1824AF8300048F9F00048CA80084D6
-:105EA00003E8C82B1720000203E020218CA4008403
-:105EB0000A000B8BAF8400048CA3010C0A000B6951
-:105EC000AF8300148D2C00188F8600043C0D7FFFDB
-:105ED0008F89001C35A3FFFF01835824240400018F
-:105EE000AF8B000CAD2000CCA38400000A000B9700
-:105EF000AF8600088CCA00140A000B8BAF8A00041E
-:105F00008CA300C80A000BCEAF8300048F84002846
-:105F10008CAC00648C8D0014018D582B1160000432
-:105F2000000000008CA200640A000BCEAF820004C7
-:105F30008C8200140A000BCEAF8200048F8500080B
-:105F400027BDFFE0AFBF0018AFB1001414A00007D9
-:105F5000AFB000108F8600202402000590C400001E
-:105F60003083003F106200B68F84001C8F910004C4
-:105F700000A080218F8C00243C0508008CA53B0CE0
-:105F80008D8B000431663FFF00C5502B554000014A
-:105F900000C02821938D000011A0007300B0F82BE1
-:105FA0008F98001C24040034930F00BC31EE0002D3
-:105FB00051C000012404003000A4C82B172000D1D8
-:105FC0000000000000A4282300B0F82B3C010800CA
-:105FD000A4243B1817E00068020020213C030800BD
-:105FE0008C633B080083102B544000010080182173
-:105FF0008F8800203C010800AC233B1000004821A2
-:106000009104000D30830020506000018F490E186C
-:106010008F8300100123382B10E00059000000008E
-:106020003C0408008C843B1000895821006B502BE5
-:10603000114000560090602B0069302300C02021E1
-:106040003C010800AC263B1012000003241FFFFC9B
-:106050001090008A32270003009FC8243C010800EA
-:10606000AC393B103C010800A4203B2E8F84000873
-:10607000120400078F83001CAF910004020020214E
-:106080008C7100CCAF90000826300001AC7000CCC1
-:106090003C0208008C423B108F8A000C2407001839
-:1060A0000082202301422823AF84000810800002D0
-:1060B000AF85000C240700108F8600183C010800F3
-:1060C000A0273B2C2407004090CC0085318B00C0DA
-:1060D000116700408F8D001014A0001500002021D2
-:1060E000934A01098F420974314500FF00022602DC
-:1060F00024A300013090007F3071007F1230007ABD
-:106100002407FF80A0C300833C0908008D293B2899
-:106110008F880020240D0002352C00083C01080067
-:10612000A02D3B6D3C010800AC2C3B282404001042
-:10613000910E000D31C6002010C00005008018210E
-:10614000240800013C010800AC283B103483000106
-:106150008FBF00188FB100148FB0001000601021A5
-:1061600003E0000827BD00203C010800A4203B18E4
-:1061700013E0FF9A020020210A000C1F00A020213A
-:106180003C0408008C843B100090602B1180FFAE13
-:10619000000000003C0F080095EF3B1801E470215F
-:1061A00001C6682B11A000072C8200043C1F600070
-:1061B0008FF954043338003F1700FFE524030042F1
-:1061C0002C8200041040FFA0240300420A000C7D32
-:1061D0008FBF0018152DFFC0000000008CDF007479
-:1061E0003C0380002405FF8003E3C825ACD900747C
-:1061F00090D80085240E000424040010330F003FC3
-:1062000001E54025A0C800858F8800203C010800DA
-:10621000A02E3B6D240300019106000D30C9002023
-:1062200015200003000000003C0308008C633B10B5
-:106230003C010800AC233B080A000C74000000007D
-:106240008F87000C8C88008400E8282B14A00002A3
-:1062500000E088218C91008424090001A3890000BA
-:106260008F440E18022028210E000AD0022030216F
-:10627000022080210A000C05AF82001000071823BD
-:10628000306600033C010800A4263B2E12200005C6
-:106290008F8C001C918B00BC316A000415400015E6
-:1062A00024CD00043C0F080095EF3B2E01E4702143
-:1062B00000AE302B50C0FF6E8F8400082C85000587
-:1062C00014A0FFA32403004230980003170000022B
-:1062D000009818232483FFFC3C010800AC233B10EA
-:1062E0000A000C410000000000A758240A000C69B5
-:1062F000016718263C010800A42D3B2E0A000CD192
-:10630000000000003C010800AC203B100A000C7C9F
-:10631000240300428F83000C14600007000010214A
-:106320008F880020240500059106000030C400FF7E
-:10633000108500030000000003E0000800000000DA
-:10634000910A0018314900FF000939C214E0FFFA30
-:106350008F8500183C04080094843B183C03080017
-:106360008C633B303C1908008F393B103C0F080010
-:1063700095EF3B2E0064C0218CAD005403197021B1
-:1063800001CF6021018D58231960001D000000001D
-:10639000910E001C8F8C0028974B0E1031CD00FF02
-:1063A0008D850004016D30238D88000030CEFFFF05
-:1063B000000E510000AAC821000038210107202149
-:1063C000032A182B0083C021AD990004AD9800006A
-:1063D000918F000A01CF6821A18D000A8F880028C3
-:1063E000974B0E12A50B0008950A003825490001AD
-:1063F000A50900389107000D34E60008A106000D3C
-:1064000003E000080000000027BDFFE093870000C4
-:106410008F8F00208FAD00143C0E7FFF8F89000806
-:1064200035C8FFFFAFBF001CAFB0001801A818248B
-:1064300091EA000D000717C03C1FBFFF00625825FE
-:106440002D2E00018F90001437F9FFFF3C18080033
-:106450008F183B303C0F080095EF3B2601796824EC
-:10646000000E47803C07EFFF3C05F0FF01A8182510
-:106470003149002034E2FFFF34ACFFFF0310582302
-:1064800027A500102406000225EA00020062182455
-:106490000080802115200002000040218F480E1C42
-:1064A000A7AA0012056000372407000030FF00FF94
-:1064B000001FCF008F8B001800793825AFA700147C
-:1064C000916F00853C08080091083B2D3C18DFFFC8
-:1064D00031EE00C0370AFFFF000E182B3C1F0800EA
-:1064E00097FF3B2000EA6824A3A80011000317408F
-:1064F00001A248258FB90010AFA900143C0A08007A
-:10650000914A3B2FA7BF00168FA80014032CC0246C
-:106510003C0B01003C0F0FFF030B18253147000314
-:1065200035EEFFFF010C682400071600006EF8240A
-:106530003C09700001A2C82503E95825AFB9001431
-:10654000AFAB00100E000072A3A000158F8C0020CE
-:10655000260200089186000D30C40020108000063D
-:106560008FBF001C3C05080094A53B1C24B0FFFF16
-:106570003C010800A4303B1C8FB0001803E0000869
-:1065800027BD00208F9800100118502B5540FFC7E1
-:10659000240700010A000D5430FF00FF9382000021
-:1065A00027BDFFE0AFBF00181040000F0080502152
-:1065B0008F880020240B00058F89000491070000BC
-:1065C0008F84001C0100282130E3003F8F860028C3
-:1065D000106B000800003821AFA900100E0004392C
-:1065E000AFAA0014A38000008FBF001803E00008CA
-:1065F00027BD00208D1900183C0F08008DEF3B10BF
-:106600008F98000C3C027FFF8D080014345FFFFF61
-:10661000033F682401F8702101AE6023018838210E
-:10662000AFA900100E000439AFAA00140A000DA291
-:10663000A38000008F8700203C05080094A53B2E16
-:106640003C0208008C423B2890E6000D0005240027
-:1066500030C300201060002C004440258F850018B6
-:1066600000006021240B000190A300850000482158
-:10667000240A00013C0F800035EE00708DC7000039
-:10668000AF8700308F5801780700FFFE3C03800081
-:10669000347900708F3800003C0508008CA5007428
-:1066A0003C0D08008DAD00700307782300AF382142
-:1066B0000000102100EF302B01A2202100861821BC
-:1066C0003C010800AC2700743C010800AC230070BA
-:1066D000AF4B01483C1908008F393B30A7490144B2
-:1066E000A74A0146AF59014C3C0B0800916B3B2D6A
-:1066F000A34B0152AF4801543C081000A74C01586D
-:1067000003E00008AF4801788F4B0E1C3C0A0800DC
-:106710008D4A3B1097490E16974D0E140145602186
-:10672000312AFFFF0A000DC531A9FFFF8F8300202A
-:106730009064000D3082002010400029000000000D
-:106740000000482100005021000040213C0780004B
-:1067500034EB00708D670000AF8700308F4C0178FC
-:106760000580FFFE3C0D800035AC00708D8B000075
-:106770003C0508008CA500743C0408008C84007063
-:106780000167302300A678210000102101E6C82B04
-:106790000082C021031970213C010800AC2F007455
-:1067A0003C010800AC2E0070AF4901483C0D0800C8
-:1067B0008DAD3B30A748014424090040A74A01465B
-:1067C0003C081000240AFF91AF4D014CA34A01522E
-:1067D000AF490154A740015803E00008AF480178D1
-:1067E0008F490E1897460E1297450E1030CAFFFFBC
-:1067F0000A000DFB30A8FFFF8F83002027BDFFF8A4
-:106800009064000D308200201040003A000000002B
-:10681000240B000100004821240A00013C088000EC
-:10682000350700708CE30000AF8300308F4C017897
-:106830000580FFFE3C0E80003C04080090843B6C09
-:1068400035C700708CEC00003C0508008CA5007476
-:10685000A3A400033C1908008F3900708FAD00001D
-:106860000183302300A63821000010210322782163
-:1068700000E6C02B01F8602101AE4025AFA8000062
-:106880003C010800AC2700743C010800AC2C0070EF
-:106890009346010A3C04080090843B6DA3A00002CB
-:1068A000A3A600018FA300003C0580FF3099007F64
-:1068B00034A2FFFF006278240019C60001F8702599
-:1068C000240D3000AF4E014C27BD0008AF4D0154E0
-:1068D000A7400158AF4B0148A7490144A74A0146C8
-:1068E0003C091000240AFF80A34A015203E000087B
-:1068F000AF4901788F4B0E1897460E1297450E1030
-:1069000030CAFFFF0A000E2F30A9FFFF8F85001845
-:106910002402008090A40085308300C0106200052E
-:106920008F86001C8F8800048F870008ACC800C8C1
-:10693000ACC700C403E00008000000003C0A0800E7
-:10694000254A37CC3C090800252938983C0808001E
-:1069500025082C4C3C07080024E739AC3C0608000D
-:1069600024C6363C3C05080024A533B43C0408008A
-:1069700024842FDC3C030800246336D43C02080046
-:10698000244234A83C010800AC2A3C383C010800F1
-:10699000AC293C343C010800AC283C303C010800E8
-:1069A000AC273C3C3C010800AC263C4C3C010800B8
-:1069B000AC253C443C010800AC243C403C010800B0
-:1069C000AC233C503C010800AC223C4803E00008EA
-:0469D00000000000C3
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex
new file mode 100644
index 0000000..652e6c8
--- /dev/null
+++ b/firmware/bnx2/bnx2-mips-06-5.0.0.j3.fw.ihex
@@ -0,0 +1,5841 @@
+:10000000080001100800000000004CC8000000C8F3
+:1000100000000000000000000000000008004CC8C4
+:100020000000001400004D90080000880800000047
+:10003000000058D000004DA408005A400000008481
+:100040000000A674080058D0000001540000A6F873
+:10005000080031D808000000000070F00000A84C33
+:10006000000000000000000000000000080070F028
+:10007000000000240001193C080004880800040066
+:100080000000175C00011960000000000000000083
+:100090000000000000000000000000000000000060
+:1000A000080000A80800000000003B38000130BC38
+:1000B0000000000000000000000000000000000040
+:0800C000000000000000000038
+:0800C8000A00004400000000E2
+:1000D000000000000000000D636F6D352E302E30E3
+:1000E0006A33000005000002000000000000000369
+:1000F00000000014000000320000000300000000B7
+:1001000000000000000000000000000000000000EF
+:1001100000000010000001360000EA600000000549
+:1001200000000000000000000000000000000008C7
+:1001300000000000000000000000000000000000BF
+:1001400000000000000000000000000000000000AF
+:10015000000000000000000000000000000000009F
+:10016000000000020000000000000000000000008D
+:10017000000000000000000000000000000000007F
+:10018000000000000000000000000010000000005F
+:10019000000000000000000000000000000000005F
+:1001A000000000000000000000000000000000004F
+:1001B000000000000000000000000000000000003F
+:1001C000000000000000000000000000000000002F
+:1001D000000000000000000000000000100000030C
+:1001E000000000000000000D0000000D3C020800AF
+:1001F00024424D003C03080024634DFCAC40000049
+:100200000043202B1480FFFD244200043C1D080005
+:1002100037BD7FFC03A0F0213C1008002610011020
+:100220003C1C0800279C4D000E000214000000003A
+:100230000000000D27BDFFE8AFBF0014AFB00010F5
+:100240009742010830437000240220001062000B26
+:10025000286220011440002F0000102124024000D9
+:1002600010620025000000002402600010620026D9
+:10027000000010210A0000948FBF001427500100D5
+:10028000920200091040001A240300013C020800F9
+:100290008C42002010400016000018210E00052B93
+:1002A00000000000960300083C06080094C64DBEFE
+:1002B0008E0400188F8200209605000C00031C009D
+:1002C00000661825AC440000AC450004240400017D
+:1002D000AC400008AC40000CAC400010AC40001436
+:1002E000AC4000180E000550AC43001C0000182163
+:1002F0000A000093006010210E0003BD0000000002
+:100300000A000093000010210E000F810000000081
+:10031000000010218FBF00148FB0001003E0000810
+:1003200027BD001827BDFFE0AFB00010AFBF001819
+:10033000AFB10014275001009203000B2402001AF1
+:10034000961100081462005B00002821322200018F
+:1003500010400008000000008E0200009603001408
+:10036000000211C200021040005A10210A0000DBF6
+:10037000A44300803C0208008C420020104000286A
+:10038000000000000E00052B00000000974201084D
+:100390009743010C8F8500203042003E3063FFFF01
+:1003A0000002140000431025ACA200008F4201009F
+:1003B0003C06080094C64DBEACA20004974301164B
+:1003C0009744010E3C02200000031C003084FFFF14
+:1003D00000641825ACA3000800C230259742011024
+:1003E0009743011224040001000214003063FFFF50
+:1003F00000431025ACA2000C974201143042FFFFCD
+:10040000ACA200108F420118ACA200149342010B61
+:10041000304200FFACA200180E000550ACA6001C34
+:100420003C0208008C420040244200013C010800CC
+:10043000AC2200403C0308008C63004432220002DE
+:1004400032240004246300013C010800AC23004472
+:10045000108000180002282B8F4202B804430008C5
+:100460008E0200203C0208008C4200602442000101
+:100470003C010800AC2200600A0000FB24050001DA
+:100480009603001600002821AF4202808E0200046D
+:10049000A7430284AF4202883C021000AF4202B878
+:1004A0003C0208008C42005C244200013C01080030
+:1004B000AC22005C8FBF00188FB100148FB0001009
+:1004C00000A0102103E0000827BD002027BDFFE0A9
+:1004D000AFB00010AFBF0018AFB10014275001003B
+:1004E0009203000B24020003961100081462006DB1
+:1004F000000020213222000110400008000000000E
+:100500008E02000096030014000211C20002104087
+:10051000005A10210A000142A44300803C02080056
+:100520008C42002010400025000000000E00052B2A
+:1005300000000000974201089743010C8F850020BE
+:100540003042003E3063FFFF0002140000431025DC
+:10055000ACA200008F4201003C06080094C64DBECC
+:10056000ACA20004974301169744010E3C02200000
+:1005700000031C003084FFFF00641825ACA30008B2
+:1005800000C2302597420110974301122404000154
+:10059000000214003063FFFF00431025ACA2000CE2
+:1005A000974201143042FFFFACA20010ACA000142F
+:1005B000ACA000180E000550ACA6001C3C020800C0
+:1005C0008C420040244200013C010800AC22004063
+:1005D0003C0208008C420044322300042442000103
+:1005E0003C010800AC2200441060001A32220002D4
+:1005F0008F4202B8044300088E0200203C0208002B
+:100600008C420060244200013C010800AC220060E2
+:100610000A0001772404000196030016000020213F
+:10062000AF4202808E020004A7430284AF420288D8
+:100630003C021000AF4202B83C0208008C42005C51
+:10064000244200013C010800AC22005C0A00017851
+:100650008FBF001810400013000020218F430104B9
+:100660003C026020AC4300148C420004240301FED1
+:10067000304203FF1443000B000020218F42010091
+:10068000000211C02442FFFC2C420008104000026E
+:100690002403000200031F403C026000AC436914C5
+:1006A000000020218FBF00188FB100148FB0001000
+:1006B0000080102103E0000827BD00208F430100C7
+:1006C0002402010050620003000311C20000000D6B
+:1006D000000311C200021040005A1021A440008003
+:1006E00003E00008000010219362000003E000080E
+:1006F000AF80000003E000080000102103E00008C4
+:1007000000001021240201001482000800000000F3
+:100710003C0208008C4200FC244200013C0108001D
+:10072000AC2200FC0A00019F30A200203C0208001D
+:100730008C420084244200013C010800AC22008469
+:1007400030A200201040000830A300103C02080036
+:100750008C420108244200013C010800AC2201083F
+:1007600003E0000800000000106000080000000026
+:100770003C0208008C420104244200013C010800B4
+:10078000AC22010403E00008000000003C02080065
+:100790008C420100244200013C010800AC2201000F
+:1007A00003E000080000000027BDFFE8AFBF001015
+:1007B0002744010094830008306200041040001BAD
+:1007C000306600028F4202B804410008240500018F
+:1007D0003C0208008C420060244200013C010800F9
+:1007E000AC2200600A0001EB8FBF00108C82002059
+:1007F0009483001600002821AF4202808C820004FE
+:10080000A7430284AF4202883C021000AF4202B804
+:100810003C0208008C42005C244200013C010800BC
+:10082000AC22005C0A0001EB8FBF001010C0000674
+:10083000006028218F4401000E00018F000000009D
+:100840000A0001EA240500018F8200088F43010499
+:1008500050430007000028218F4401000E00018F43
+:10086000000000008F420104AF8200080000282130
+:100870008FBF001000A0102103E0000827BD001862
+:100880003C0208008C420088274301009465000C5C
+:10089000244200013C010800AC2200888C6400184E
+:1008A0000345102190454000AF4400388C62001C85
+:1008B0002403FFF800052E000043102434420004F6
+:1008C000AF42003C3C020005AF4200300000000097
+:1008D0000000000000000000AF450404000000001C
+:1008E00000000000000000003C020006344200014D
+:1008F000AF420030000000000000000000000000D7
+:100900008F420000304200101040FFFD0000102117
+:1009100003E000080000000027BDFFE0AFB20018B0
+:100920003C036010AFBF001CAFB10014AFB00010AB
+:100930008C6450002402FF7F3C1A80000082202437
+:100940003484380C24020037AC6450003C12080098
+:1009500026524D38AF42000824020C80AF420024DA
+:100960003C1B80083C06080024C6062C02401021CF
+:100970002404001C2484FFFFAC4600000481FFFD1A
+:10098000244200043C0208002442016C3C0108009F
+:10099000AC224D403C020800244204043C01080003
+:1009A000AC224D443C020800244207B83C01080038
+:1009B000AC224D883C0208002442025C3C03080043
+:1009C000246306343C040800248406E03C05080047
+:1009D00024A53B503C010800AC224DA03C0208007D
+:1009E000244205F43C010800AC264D843C0108007B
+:1009F000AC254D943C010800AC234D9C3C01080003
+:100A0000AC244DA43C010800AC224DA83C010800D8
+:100A1000AC234D3C3C010800AC204D483C01080093
+:100A2000AC204D4C3C010800AC204D503C0108006E
+:100A3000AC204D543C010800AC204D583C0108004E
+:100A4000AC204D5C3C010800AC204D603C0108002E
+:100A5000AC244D643C010800AC204D683C0108000A
+:100A6000AC204D6C3C010800AC204D703C010800EE
+:100A7000AC204D743C010800AC204D783C010800CE
+:100A8000AC264D7C3C010800AC264D803C010800A2
+:100A9000AC204D8C3C010800AC254D903C01080079
+:100AA000AC234D980E0006BB000000003C02800005
+:100AB000344200708C420000AF8200143C030800F6
+:100AC0008C6300208F820004104300043C028000ED
+:100AD0000E0004F3AF8300043C0280003446007033
+:100AE0003C0308008C6300A03C0208008C4200A478
+:100AF000104300048F8400143C010800AC2300A4C0
+:100B0000A743009E8CCA00003C0308008C6300BC15
+:100B10003C0208008C4200B80144202300641821E4
+:100B2000000040210064202B0048102100441021C7
+:100B30003C010800AC2300BC3C010800AC2200B81A
+:100B40008F510000322200071040FFDCAF8A0014F2
+:100B50008CC600003C0508008CA500BC3C040800C5
+:100B60008C8400B800CA302300A628210000102180
+:100B700000A6302B00822021008620213227000190
+:100B80003C010800AC2500BC3C010800AC2400B8C6
+:100B900010E0001F322200028F420100AF4200200D
+:100BA0008F420104AF4200A89342010B0E0001885E
+:100BB000305000FF2E02001D544000040010108031
+:100BC0000E00018B0A0002C5000000000052102137
+:100BD0008C4200000040F8090000000010400005B1
+:100BE0003C0240008F4301043C026020AC430014EF
+:100BF0003C024000AF4201383C0208008C42003405
+:100C0000244200013C010800AC22003432220002E0
+:100C10001040000E322200048F4201400E00018875
+:100C2000AF4200200E00034B000000003C024000D9
+:100C3000AF4201783C0208008C4200382442000197
+:100C40003C010800AC220038322200041040FF981A
+:100C50003C0280008F4201800E000188AF420020DC
+:100C60008F43018024020F00146200050000000081
+:100C70008F420188A742009C0A0002FA3C02400011
+:100C80009362000024030050304200FF1443000828
+:100C90003C0240000E00032D000000005440000400
+:100CA0003C0240000E000E0D000000003C0240001F
+:100CB000AF4201B83C0208008C42003C24420001D3
+:100CC0003C010800AC22003C0A00027A3C02800091
+:100CD0003C0290003442000100822025AF440020F5
+:100CE0008F4200200440FFFE0000000003E00008E7
+:100CF000000000003C0280003442000100822025F8
+:100D000003E00008AF44002027BDFFE0AFB10014AE
+:100D1000AFB0001000808821AFBF00180E000302A2
+:100D200030B000FF9362007D022020210202802566
+:100D3000A370007D8F7000743C0280000E00030BD6
+:100D400002028024160000098FBF00188F4201F8AC
+:100D50000440FFFE24020002AF5101C0A34201C4BF
+:100D60003C021000AF4201F88FBF00188FB1001491
+:100D70008FB0001003E0000827BD002027BDFFE86A
+:100D8000AFBF0010974201843042020010400005BE
+:100D9000000020210E001042000000000A00034164
+:100DA000240400018F420188044000098FBF001015
+:100DB0008F4201883C03FF00004310243C030400E1
+:100DC00014430003240400019362003E8FBF00100F
+:100DD0000080102103E0000827BD00182402000154
+:100DE000A3600022A76200168F4401400A0003108E
+:100DF0002405000127BDFFE8AFBF0014AFB000100D
+:100E000093620000304400FF3883002038820030B5
+:100E10000003182B0002102B00621824106000033E
+:100E200024020050148200628FBF001493420148D4
+:100E3000304200FF2443FFFF2C6200051040005C9D
+:100E40008FBF0014000310803C03080024634CC8CB
+:100E5000004310218C420000004000080000000008
+:100E60000E0003028F4401408F70000C8F4201443A
+:100E70001602000224020001AF62000C0E00030BF8
+:100E80008F4401408F420144145000048FBF00146E
+:100E90008FB000100A000FB827BD00188F62000C39
+:100EA0000A0003B300000000976200108F43014462
+:100EB0003042FFFF1462000900000000240200011C
+:100EC000A76200108F420140AF4202003C021000B6
+:100ED000AF4202380A0003BA8FBF001497620010B5
+:100EE0000A0003B3000000000E0003028F4401401B
+:100EF000976200128F4301443050FFFF1603000237
+:100F000024020001A76200120E00030B8F4401406F
+:100F10008F420144160200048FBF00148FB00010EE
+:100F20000A00034527BD0018976200120A0003B3A8
+:100F300000000000976200148F4301443042FFFF1D
+:100F4000146200068FBF0014240200018FB000104D
+:100F5000A76200140A0012E227BD0018976200146D
+:100F60000A0003B300000000976200168F4301449B
+:100F70003042FFFF14620006240200018FBF0014FC
+:100F80008FB00010A76200160A000BAA27BD001838
+:100F900097620016144000068FBF00143C02080040
+:100FA0008C420070244200013C010800AC22007019
+:100FB0008FB0001003E0000827BD001827BDFFE830
+:100FC000AFBF0014AFB000108F500100936200005B
+:100FD00093430109304400FF2402001F106200A562
+:100FE0002862002010400018240200382862000AFD
+:100FF0001040000C2402000B286200081040002C56
+:1010000000000000046000E528620002144000288F
+:1010100024020006106200268FBF00140A0004B7E5
+:101020008FB000101062005E2862000B144000DCDC
+:101030008FBF00142402000E106200738FB00010E6
+:101040000A0004B700000000106200C028620039E6
+:101050001040000A2402008024020036106200CAF8
+:1010600028620037104000B424020035106200C12D
+:101070008FBF00140A0004B78FB000101062002B5D
+:101080002862008110400006240200C824020039B2
+:10109000106200B48FBF00140A0004B78FB00010B4
+:1010A000106200998FBF00140A0004B78FB00010BF
+:1010B0003C0208008C420020104000B98FBF001491
+:1010C0000E00052B000000008F4201008F830020DE
+:1010D0009745010C97460108AC6200008F4201045D
+:1010E0003C04080094844DBE00052C00AC62000452
+:1010F0008F4201180006340000C43025AC6200089D
+:101100008F42011C24040001AC62000C9342010ACE
+:1011100000A22825AC650010AC600014AC6000187B
+:10112000AC66001C0A00048D8FBF00143C0208004E
+:101130008C4200201040009A8FBF00140E00052B37
+:1011400000000000974401083C03080094634DBE72
+:101150009745010C000422029746010E8F82002061
+:10116000000426000083202500052C003C0300809D
+:1011700000A6282500832025AC400000AC400004D8
+:10118000AC400008AC40000CAC450010AC40001472
+:10119000AC400018AC44001C0A00048C240400017C
+:1011A0009742010C144000150000000093620005F6
+:1011B0003042001014400011000000000E00030235
+:1011C0000200202193620005020020213442001019
+:1011D0000E00030BA36200059362000024030020AD
+:1011E000304200FF1043006D020020218FBF001429
+:1011F0008FB000100A00105827BD00180000000D25
+:101200000A0004B68FBF00143C0208008C42002084
+:10121000104000638FBF00140E00052B000000007B
+:101220008F4201048F8300209744010C3C05080085
+:1012300094A54DBEAC6200009762002C000424000F
+:101240003042FFFF008220253C02400E00A22825EC
+:10125000AC640004AC600008AC60000CAC60001032
+:10126000AC600014AC600018AC65001C0A00048C73
+:10127000240400010E00030202002021A7600008E0
+:101280000E00030B02002021020020210E0003109B
+:10129000240500013C0208008C4200201040004060
+:1012A0008FBF00140E00052B000000009742010CB8
+:1012B0008F8300203C05080094A54DBE0002140059
+:1012C000AC700000AC620004AC6000088F64004C9D
+:1012D0003C02401F00A22825AC64000C8F62005025
+:1012E00024040001AC6200108F620054AC62001450
+:1012F000AC600018AC65001C8FBF00148FB00010EC
+:101300000A00055027BD0018240200205082002545
+:101310008FB000100E000FA202002021104000200C
+:101320008FBF0014020020218FB000100000282180
+:101330000A00031027BD0018020020218FBF0014EF
+:101340008FB000100A00061827BD00189745010C41
+:10135000020020218FBF00148FB000100A00063851
+:1013600027BD0018020020218FB000100A00065D82
+:1013700027BD00189345010D020020218FB00010F9
+:101380000A0006A727BD0018020020218FBF001405
+:101390008FB000100A00068327BD00188FBF00140D
+:1013A0008FB0001003E0000827BD00188F420278BC
+:1013B0000440FFFE2402000234840080AF44024057
+:1013C000A34202443C02100003E00008AF4202784E
+:1013D0003C04080094844DCA3C0208008C424DD461
+:1013E0003083FFFF000318C000431021AF42003CD0
+:1013F0003C0208008C424DD0AF4200383C02005005
+:1014000034420008AF42003000000000000000003D
+:10141000000000008F420000304200201040FFFD1D
+:10142000000000008F4204003C010800AC224DC0C7
+:101430008F4204043C010800AC224DC43C02002051
+:10144000AF420030000000003C02080094424DC84A
+:101450003C03080094634DCC3C05080094A54DCE98
+:1014600024840001004310213083FFFF3C01080069
+:10147000A4224DC83C010800A4244DCA14650003F1
+:10148000000000003C010800A4204DCA03E0000851
+:10149000000000003C05000A27BDFFE803452821A5
+:1014A0003C04080024844DB0AFBF00100E0005B509
+:1014B0002406000A3C02080094424DB23C03080096
+:1014C00094634DCE3042000F2442000300431804C1
+:1014D00024027FFF0043102B10400002AF83001C4A
+:1014E0000000000D0E0004C2000000003C020800D5
+:1014F00094424DBA8FBF001027BD001803E00008CA
+:10150000A74200A23C02000A0342102194430006B5
+:101510003C02080094424DBA3C010800A4234DB699
+:10152000004310238F83001C0002140000021403E8
+:101530000043102B03E000083842000127BDFFE8FC
+:10154000AFBF00103C02000A034210219442000683
+:101550003C010800A4224DB60E00050F000000005B
+:101560005440FFF93C02000A8FBF001003E000085E
+:1015700027BD001827BDFFE8AFBF00100E00050F04
+:101580000000000010400003000000000E00051DD8
+:10159000000000003C0208008C424DC08FBF0010CC
+:1015A00027430400AF4200383C0208008C424DC47F
+:1015B00027BD0018AF830020AF42003C3C0200056D
+:1015C000AF42003003E00008AF8000188F8200189F
+:1015D0003C0300060002114000431025AF420030DA
+:1015E0000000000000000000000000008F4200002A
+:1015F000304200101040FFFD27420400AF8200205F
+:1016000003E00008AF8000183C0608008CC64DC4FB
+:101610008F8500188F8300203C02080094424DBA49
+:1016200027BDFFE024A5000124630020244200011F
+:1016300024C70020AFB10014AFB00010AFBF001836
+:10164000AF850018AF8300203C010800A4224DBAEA
+:10165000309000FF3C010800AC274DC404C10008D5
+:101660000000882104E00006000000003C020800A1
+:101670008C424DC0244200013C010800AC224DC008
+:101680003C02080094424DBA3C03080094634DC8E4
+:101690000010202B004310262C420001004410258E
+:1016A000144000048F830018240200101462000FFD
+:1016B000000000000E000541241100013C03080059
+:1016C00094634DBA3C02080094424DC81462000372
+:1016D000000000000E0004C200000000160000031D
+:1016E000000000000E00052B000000003C03080075
+:1016F00094634DBE3C02080094424DBC246300013B
+:101700003064FFFF3C010800A4234DBE1482000397
+:10171000000000003C010800A4204DBE120000069D
+:10172000000000003C02080094424DBAA74200A20B
+:101730000A0005A3022010210E00050F0000000082
+:1017400010400004022010210E00051D00000000C2
+:10175000022010218FBF00188FB100148FB000102D
+:1017600003E0000827BD00203084FFFF30A5FFFF05
+:1017700000001821108000070000000030820001E6
+:101780001040000200042042006518210A0005AB49
+:101790000005284003E000080060102110C000068A
+:1017A00024C6FFFF8CA2000024A50004AC82000028
+:1017B0000A0005B52484000403E0000800000000CE
+:1017C00010A0000824A3FFFFAC860000000000006A
+:1017D000000000002402FFFF2463FFFF1462FFFAF1
+:1017E0002484000403E0000800000000240200013B
+:1017F000AF62000CA7620010A7620012A76200147B
+:1018000003E00008A76200163082007F0342102127
+:101810003C08000E004818213C0208008C420020C1
+:1018200027BDFFD82407FF80AFB3001CAFB200185C
+:10183000AFB10014AFB00010AFBF00200080802116
+:1018400030B100FF0087202430D200FF1040002F6D
+:1018500000009821AF44002C906200002403005047
+:10186000304200FF1443000E000000003C0208005C
+:101870008C4200E00202102100471024AF42002CED
+:101880003C0208008C4200E0020210213042007F3E
+:101890000342102100481021944200D43053FFFF2E
+:1018A0000E00052B000000003C02080094424DBED3
+:1018B0008F8300200011340000C2302500122C005C
+:1018C0003C02400000C2302534A50001AC7000008D
+:1018D0008FBF0020AC6000048FB20018AC7300080A
+:1018E0008FB10014AC60000C8FB3001CAC6500100D
+:1018F0008FB00010AC60001424040001AC6000182C
+:1019000027BD00280A000550AC66001C8FBF0020D0
+:101910008FB3001C8FB200188FB100148FB000106D
+:1019200003E0000827BD00289343010F24020010A4
+:101930001062000E2865001110A00007240200129A
+:10194000240200082405003A10620006000030213D
+:1019500003E0000800000000240500351462FFFCCD
+:10196000000030210A0005D0000000008F42007402
+:1019700024420FA003E00008AF62000C27BDFFE87F
+:10198000AFBF00100E000310240500018FBF001030
+:1019900024020001A762001227BD001824020001E2
+:1019A00003E00008A360002227BDFFE0AFB10014F0
+:1019B000AFB00010AFBF001830B1FFFF0E00030240
+:1019C000008080219362003F24030004304200FF26
+:1019D0001443000C02002021122000082402000AF7
+:1019E0000E0005C900000000936200052403FFFEFD
+:1019F00000431024A362000524020012A362003FEA
+:101A0000020020210E00030BA360008116200003BA
+:101A1000020020210E00062D0000000002002021FF
+:101A2000322600FF8FBF00188FB100148FB0001056
+:101A3000240500380A0005D027BD002027BDFFE09F
+:101A4000AFBF001CAFB20018AFB10014AFB00010B0
+:101A50000E000302008080210E0005C90000000076
+:101A60009362003F24120018305100FF123200032D
+:101A70000200202124020012A362003F93620005AD
+:101A80002403FFFE004310240E00030BA362000595
+:101A9000020020212405002016320007000030211A
+:101AA0008FBF001C8FB200188FB100148FB00010D0
+:101AB0000A00031027BD00208FBF001C8FB2001842
+:101AC0008FB100148FB00010240500390A0005D032
+:101AD00027BD002027BDFFE8AFB00010AFBF001446
+:101AE0009742010C2405003600808021144000102C
+:101AF000304600FF0E000302000000002402001226
+:101B0000A362003F93620005344200100E0005C935
+:101B1000A36200050E00030B020020210200202119
+:101B20000E000310240500200A00069C000000009F
+:101B30000E0005D0000000000E000302020020216C
+:101B4000936200232403FF9F0200202100431024FE
+:101B50008FBF00148FB00010A36200230A00030B94
+:101B600027BD001827BDFFE0AFBF0018AFB10014BC
+:101B7000AFB0001030B100FF0E00030200808021E2
+:101B8000240200120E0005C9A362003F0E00030BE1
+:101B90000200202102002021022030218FBF0018E6
+:101BA0008FB100148FB00010240500350A0005D055
+:101BB00027BD0020A380002C03E00008A380002D97
+:101BC0008F4202780440FFFE8F820034AF42024011
+:101BD00024020002A34202443C02100003E0000879
+:101BE000AF4202783C0360008C625400304200082F
+:101BF0001440FFFD000000008C625408AF82000C0E
+:101C000024020052AC605408AC645430AC625434CA
+:101C10002402000803E00008AC6254003C026000AB
+:101C20008C42540030420008104000053C03600024
+:101C30008C625400304200081440FFFD0000000098
+:101C40008F83000C3C02600003E00008AC435408A2
+:101C500090A3000024020005008040213063003F73
+:101C600000004821146200050000502190A2001CD1
+:101C700094A3001E304900FF306AFFFFAD00000C46
+:101C8000AD000010AD000024950200148D05001C6D
+:101C90008D0400183042FFFF00491023000211009C
+:101CA000000237C3004038210086202300A2102BF9
+:101CB0000082202300A72823AD05001CAD040018D6
+:101CC000A5090014A5090020A50A001603E00008D4
+:101CD000A50A00228F4201F80440FFFE2402000200
+:101CE000AF4401C0A34201C43C02100003E000085D
+:101CF000AF4201F83C0208008C4200B427BDFFE867
+:101D0000AFBF001424420001AFB000103C01080036
+:101D1000AC2200B48F4300243C02001F30AA00FF15
+:101D20003442FF8030D800FF006280240080F82118
+:101D300030EF00FF1158003B01405821240CFF8078
+:101D40003C19000A3163007F000310C000031940F2
+:101D5000006218213C0208008C4200DC256800016A
+:101D6000310D007F03E21021004310213043007F3A
+:101D700003431821004C102400794821AF4200246D
+:101D80008D220024016C1824006C7026AD22000CFA
+:101D90008D220024310800FFAD220010952200148E
+:101DA000952300208D27001C3042FFFF3063FFFF8A
+:101DB0008D2600180043102300021100000227C3E3
+:101DC0000040282100C4302300E2102B00C2302341
+:101DD00000E53823AD27001CAD2600189522002011
+:101DE000A522001495220022154B000AA5220016F8
+:101DF0008D2300248D2200082546000131450080F6
+:101E00001462000430C4007F108F000238AA0080E2
+:101E100000C0502151AF000131C800FF1518FFC9A3
+:101E2000010058218F8400343082007F0342182142
+:101E30003C02000A006218212402FF800082202454
+:101E4000AF440024A06A0079A06A00838C6200502D
+:101E50008F840034AC6200708C6500743C027FFF9C
+:101E60003442FFFF00A228240E000703AC65007473
+:101E7000AF5000248FBF00148FB0001003E00008A3
+:101E800027BD001827BDFFC0AFBE0038AFB7003474
+:101E9000AFB5002CAFB20020AFB1001CAFB000183E
+:101EA000AFBF003CAFB60030AFB40028AFB30024E2
+:101EB0008F4500248F4600288F43002C3C02001FD2
+:101EC0003442FF800062182400C230240080A82120
+:101ED000AFA3001400A2F0240E0006C7AFA60010A6
+:101EE0003C0208008C4200E02410FF80036088213F
+:101EF00002A2102100501024AF4200243C0208002E
+:101F00008C4200E002A210213042007F03421821DF
+:101F10003C02000A00629021924200D29363008446
+:101F2000305700FF306300FF2402000110620034CC
+:101F30000360202124020002146200360000000029
+:101F40000E0012AE024028219223008392220083C9
+:101F50003063007F3042007F000210C00003194050
+:101F6000006218213C0208008C4200DC02A2102111
+:101F70000043382100F01024AF4200289225007859
+:101F80009224008330E2007F034218213C02000CBF
+:101F900014850007006280212402FFFFA24200F1A5
+:101FA0002402FFFFA64200F20A0007BF2402FFFF3F
+:101FB00096020020A24200F196020022A64200F200
+:101FC0008E020024AE4200F492220083A24200F06E
+:101FD0008E4200C8AE4200FC8E4200C4AE4200F801
+:101FE0008E220050AE4201008E4200CCAE4201046F
+:101FF000922200853042003F0A00081A3442004015
+:102000000E0012D102402821922200850A00081AEF
+:102010003042003F936200852403FFDF3042003FDF
+:10202000A36200859362008500431024A3620085AB
+:102030009363008393620078307400FF304200FFA6
+:1020400010540036240AFF803C0C000C3283007FC1
+:10205000000310C000031940006218213C02080070
+:102060008C4200DC268800013109007F02A2102189
+:102070000043382130E2007F0342182100EA102497
+:10208000AF420028006C80218E020024028A1824AE
+:10209000006A5826AE02000C8E020024310800FFB0
+:1020A000AE02001096020014960300208E07001C5A
+:1020B0003042FFFF3063FFFF8E06001800431023FD
+:1020C00000021100000227C30040282100C4302371
+:1020D00000E2102B00C2302300E53823AE07001CBD
+:1020E000AE06001896020020A602001496020022F6
+:1020F000A602001692220079304200FF1054000719
+:102100000000000051370001316800FF9222007882
+:10211000304200FF1448FFCD0100A021922200832D
+:10212000A22200798E2200500A00087AAE220070A6
+:10213000A22200858E22004C2405FF80AE42010CB5
+:102140009222008534420020A2220085924200D1D2
+:102150003C0308008C6300DC305400FF3C020800A4
+:102160008C4200E400143140001420C002A3182166
+:1021700000C4202102A21021006438210046102151
+:102180000045182400E52824AF450028AF43002C63
+:102190003042007F924400D030E3007F0342282188
+:1021A000034318213C02000C006280213C02000E17
+:1021B000309600FF00A298211296002A000000002D
+:1021C0008E02000C02002021026028211040002510
+:1021D000261000280E0006E2000000009262000DAA
+:1021E00026830001307400FF3042007FA262000DA0
+:1021F0002404FF801697FFF0267300203C0208009D
+:102200008C4200DC0000A02102A210210044102416
+:10221000AF4200283C0208008C4200E43C03080066
+:102220008C6300DC02A2102100441024AF42002C79
+:102230003C0208008C4200E402A318213063007FB6
+:1022400002A210213042007F0342202103431821C3
+:102250003C02000C006280213C02000E0A00083C97
+:10226000008298218E4200D8AE2200508E4200D8C3
+:10227000AE22007092250083924600D19223008303
+:10228000924400D12402FF8000A228243063007F02
+:10229000308400FF00A628250064182A1060000280
+:1022A00030A500FF38A50080A2250083A225007973
+:1022B0000E0006D5000000009222007E02A0202120
+:1022C000A222007A8E2300743C027FFF3442FFFF7B
+:1022D000006218240E000703AE2300748FA20010C2
+:1022E000AF5E00248FBF003CAF4200288FBE003895
+:1022F0008FA200148FB700348FB600308FB5002C3A
+:102300008FB400288FB300248FB200208FB1001C3F
+:102310008FB0001827BD004003E00008AF42002C3A
+:1023200090A2000024420001A0A200003C0308008B
+:102330008C6300F4304200FF1443000F0080302112
+:10234000A0A000003C0208008C4200E48F8400340E
+:10235000008220213082007F034218213C02000CC1
+:10236000006218212402FF8000822024ACC30000F8
+:1023700003E00008AF4400288C82000024420020C3
+:1023800003E00008AC82000094C200003C08080092
+:10239000950800CA30E7FFFF0080482101021021A4
+:1023A000A4C2000094C200003042FFFF00E2102BE4
+:1023B00054400001A4C7000094A200003C030800A0
+:1023C0008C6300CC24420001A4A2000094A200006F
+:1023D0003042FFFF544300078F8600280107102B6F
+:1023E000A4A000005440000101003821A4C700004F
+:1023F0008F8600288CC4001CAF44003C94A20000CF
+:102400008F43003C3042FFFF000210C000621821E1
+:10241000AF43003C8F42003C008220231880000420
+:10242000000000008CC200180A0008DB24420001F2
+:102430008CC20018AF4200383C02005034420010F9
+:10244000AF4200300000000000000000000000006B
+:102450008F420000304200201040FFFD00000000CD
+:102460008F420404AD2200048F420400AD2200001C
+:102470003C020020AF42003003E0000800000000F2
+:1024800027BDFFE0AFB20018AFB10014AFB000102D
+:10249000AFBF001C94C2000000C080213C120800A5
+:1024A000965200C624420001A602000096030000D6
+:1024B00094E2000000E03021144300058FB10030A9
+:1024C0000E0008B0024038210A00090D000000008B
+:1024D0008C8300048C8200042442004004610007C5
+:1024E000AC8200048C820004044000040000000060
+:1024F0008C82000024420001AC82000096020000A1
+:102500003042FFFF50520001A6000000962200005A
+:1025100024420001A62200008F820028962300009A
+:1025200094420016144300048FBF001C24020001D3
+:10253000A62200008FBF001C8FB200188FB10014BC
+:102540008FB0001003E0000827BD00208F8900280D
+:1025500027BDFFE0AFBF00188D22002827480400E8
+:1025600030E700FFAF4200388D22002CAF880030EA
+:10257000AF42003C3C020005AF42003000000000CA
+:10258000000000000000000000000000000000004B
+:10259000000000008C82000C8C82000CAD02000058
+:1025A0008C820010AD0200048C820018AD0200087D
+:1025B0008C82001CAD02000C8CA20014AD02001035
+:1025C0008C820020AD02001490820005304200FF92
+:1025D00000021200AD0200188CA20018AD02001C0F
+:1025E0008CA2000CAD0200208CA20010AD020024D1
+:1025F0008CA2001CAD0200288CA20020AD02002C91
+:10260000AD060030AD000034978300263402FFFF92
+:1026100014620002006020213404FFFF10E000116A
+:10262000AD040038952300369524003624020001BD
+:102630003063FFFF000318C2006918219065004055
+:10264000308400070082100400451025A06200407D
+:102650008F820028944200563042FFFF0A0009741E
+:10266000AD02003C9523003695240036240200017B
+:102670003063FFFF000318C2006918219065004015
+:102680003084000700821004000210270045102447
+:10269000A0620040AD00003C00000000000000000F
+:1026A000000000003C02000634420040AF4200300F
+:1026B0000000000000000000000000008F42000049
+:1026C000304200101040FFFD8F860028AF88003098
+:1026D00024C2005624C7003C24C4002824C500326C
+:1026E00024C600360E0008EEAFA200108FBF0018FF
+:1026F00003E0000827BD00208F8300243C0608006B
+:102700008CC600E88F82003430633FFF00031980DD
+:1027100000461021004310212403FF803046007F33
+:1027200000431024AF420028034618213C02000C4D
+:102730000062302190C2000D30A500FF000038215A
+:1027400034420010A0C2000D8F8900288F8A002417
+:1027500095230036000A138230480003240200014A
+:10276000A4C3000E1102000B290200021040000554
+:10277000240200021100000C240300010A0009B821
+:102780000000182111020006000000000A0009B82C
+:10279000000018218CC2002C0A0009B82443000153
+:1027A0008CC20014244300018CC200180043102B7B
+:1027B00050400009240700012402002714A200034E
+:1027C000000000000A0009C4240700019522003E11
+:1027D00024420001A522003E000A13823043000378
+:1027E0002C620002104000090080282114600004BF
+:1027F0000000000094C200360A0009D43046FFFFF2
+:102800008CC600380A0009D400802821000030213D
+:102810003C04080024844DD80A000921000000006F
+:10282000274901008D22000C95230006012020215C
+:10283000000216023046003F3063FFFF24020027EB
+:1028400000C0282128C7002810C2000EAF83002432
+:1028500010E00008240200312402002110C2000907
+:102860002402002510C200079382002D0A0009F3FC
+:102870000000000010C200059382002D0A0009F339
+:10288000000000000A00098C000000000A0006BEDB
+:102890000000000095230006912400058D25000C02
+:1028A0008D2600108D2700188D28001C8D290020F2
+:1028B000244200013C010800A4234DDE3C01080035
+:1028C000A0244DDD3C010800AC254DE43C0108008E
+:1028D000AC264DE83C010800AC274DF03C01080057
+:1028E000AC284DF43C010800AC294DF803E0000889
+:1028F000A382002D8F87002827BDFFC0AFB300340F
+:10290000AFB20030AFB1002CAFB00028AFBF00387D
+:102910003C0208008C4200D094E3003030B0FFFF4E
+:10292000005010073045FFFF3063FFFF00C09821C3
+:10293000A7A200103C110800963100C614A300069F
+:102940003092FFFF8CE2002424420030AF42003C72
+:102950000A000A2C8CE2002094E200323042FFFF91
+:1029600054A2000827A400188CE2002C2442003056
+:10297000AF42003C8CE20028AF4200380A000A3A1D
+:102980008F84002827A5001027A6002002203821C8
+:102990000E0008B0A7A000208FA20018244200302B
+:1029A000AF4200388FA2001CAF42003C8F84002849
+:1029B0003C020005AF4200309482003427430400FB
+:1029C0003042FFFF0202102B14400007AF8300309B
+:1029D0009482005494830034020210210043102397
+:1029E0000A000A4E3043FFFF94830054948200345F
+:1029F0000223182100501023006218233063FFFFC8
+:102A0000948200163042FFFF1443000300000000D0
+:102A10000A000A5C24030001948200163042FFFF82
+:102A20000043102B104000058F8200309482001666
+:102A3000006210233043FFFF8F820030AC53000050
+:102A4000AC400004AC520008AC43000C3C02000651
+:102A500034420010AF4200300000000000000000CF
+:102A6000000000008F420000304200101040FFFDC7
+:102A7000001018C20064182190650040320400075D
+:102A8000240200018FBF00388FB300348FB20030B2
+:102A90008FB1002C8FB00028008210040045102553
+:102AA00027BD004003E00008A062004027BDFFA84A
+:102AB000AFB60050AFB5004CAFB40048AFB3004460
+:102AC000AFB1003CAFBF0054AFB20040AFB0003870
+:102AD0008C9000003C0208008C4200E88F86003495
+:102AE000960300022413FF8000C2302130633FFFB1
+:102AF0000003198000C3382100F3102490B20000B5
+:102B0000AF42002C9203000230E2007F03423021EA
+:102B10003C02000E00C28821306300C02402004045
+:102B20000080A82100A0B021146200260000A0218E
+:102B30008E3400388E220018144000022402000156
+:102B4000AE2200189202000D304200201440001501
+:102B50008F8200343C0308008C6300DC001238C014
+:102B6000001231400043102100C7302100463821B7
+:102B700030E300073C02008030E6007800C23025D8
+:102B80000343182100F31024AF4208002463090016
+:102B9000AF4608108E2200188C63000800431021F5
+:102BA000AE2200188E22002C8E2300182442000131
+:102BB0000062182B1060003D000000000A000B109E
+:102BC00000000000920300022402FFC00043102412
+:102BD000304200FF1440000524020001AE2200181C
+:102BE000962200360A000AF93054FFFF8E220014A4
+:102BF00024420001AE2200189202000000021600DA
+:102C000000021603044100290000000096020002A1
+:102C100027A4001000802821A7A200169602000217
+:102C200024070001000030213042FFFFAF82002462
+:102C30000E000921AFA0001C960300023C0408000E
+:102C40008C8400E88F82003430633FFF00031980DA
+:102C500000441021004310213043007F3C05000C4C
+:102C60000053102403431821AF42002800651821A7
+:102C70009062000D001221403042007FA062000DE2
+:102C80003C0308008C6300E48F8200340043102171
+:102C90000044382130E2007F03421021004510211A
+:102CA00000F31824AF430028AEA200009222000DCA
+:102CB000304200101040001302A020218F83002812
+:102CC0008EA40000028030219462003E2442FFFF67
+:102CD000A462003E948400029625000E3084FFFF1B
+:102CE0000E000A0B30A5FFFF8F82002894430034AA
+:102CF0009622000E1443000302A0202124020001AA
+:102D0000A382002C02C028210E00089600000000BB
+:102D10008FBF00548FB600508FB5004C8FB4004861
+:102D20008FB300448FB200408FB1003C8FB00038A9
+:102D300003E0000827BD00588F82002827BDFFD080
+:102D4000AFB40028AFB20020AFBF002CAFB3002457
+:102D5000AFB1001CAFB00018904400D0904300D138
+:102D60000000A021309200FFA3A30010306300FFF9
+:102D70008C5100D88C5300DC1072002B240200010F
+:102D80003C0308008C6300E493A400108F8200349D
+:102D90002406FF800004214000431021004410213C
+:102DA0003043007F00461024AF420028034318211F
+:102DB0003C02000C006218218C62000427A400145D
+:102DC00027A5001002228021027010230440001564
+:102DD000AFA300149062000D00C21024304200FF27
+:102DE00014400007020088219062000D3442004028
+:102DF0000E000896A062000D0A000B5593A2001069
+:102E00000E000A79241400018F830028AC7000D8CA
+:102E100093A20010A06200D193A200101452FFD818
+:102E20000000000024020001168200048FBF002C65
+:102E30000E0006BE000000008FBF002C8FB40028DB
+:102E40008FB300248FB200208FB1001C8FB0001808
+:102E500003E0000827BD003027BDFFD8AFB3001C3A
+:102E6000AFB20018AFB10014AFB00010AFBF002078
+:102E70000080982100E0802130B1FFFF0E00052B7B
+:102E800030D200FF00000000000000000000000041
+:102E90008F820020AC510000AC520004AC530008FB
+:102EA000AC40000CAC400010AC400014AC4000182A
+:102EB0003C03080094634DBE02038025AC50001C07
+:102EC00000000000000000000000000024040001D9
+:102ED0008FBF00208FB3001C8FB200188FB1001479
+:102EE0008FB000100A00055027BD002827BDFFE85D
+:102EF000AFB00010AFBF001430A5FFFF30C600FF19
+:102F00000080802124020C80AF42002400000000D9
+:102F100000000000000000000000000000000000B1
+:102F20000E000B64000000003C040800248400E054
+:102F30008C8200002403FF808FBF00140202102146
+:102F400000431024AF4200248C8200003C03000A9E
+:102F5000020280213210007F035010218FB0001038
+:102F60000043102127BD001803E00008AF820028AD
+:102F700027BDFFE8AFBF00108F4401403C030800AD
+:102F80008C6300E02402FF80AF84003400831821AA
+:102F900000621024AF4200243C020008034240219A
+:102FA000950500023063007F3C02000A03431821AC
+:102FB0000062182130A5FFFF3402FFFF000030211E
+:102FC0003C07602010A20006AF8300282402FFFF08
+:102FD000A5020002946500D40E000B8930A5FFFF06
+:102FE0008FBF001024020C8027BD001803E00008EA
+:102FF000AF4200243C020008034240219502000237
+:103000003C0A0800954A00C63046FFFF14C000077E
+:103010003402FFFF8F8200288F8400343C07602039
+:10302000944500D40A000BF230A5FFFF10C2002423
+:103030008F87002894E2005494E400163045FFFF87
+:1030400000A6102300A6182B3089FFFF1060000493
+:103050003044FFFF00C51023012210233044FFFF3E
+:10306000008A102B1040000C012A102324020001BA
+:10307000A50200162402FFFFA502000294E500D479
+:103080008F8400340000302130A5FFFF3C07602012
+:103090000A000B89000000000044102A10400008BC
+:1030A00000000000950200163042000110400004AC
+:1030B000000000009742007E24420014A502001682
+:1030C00003E00008000000008F84002827BDFFE017
+:1030D000AFBF0018948200349483003E1060001A41
+:1030E0003048FFFF9383002C240200011462002764
+:1030F0008FBF00188F820028000818C2310800070F
+:10310000006218212447003A244900542444002036
+:10311000244500302446003490620040304200FFD5
+:103120000102100730420001104000168FBF001846
+:103130000E0008EEAFA900108F82002894420034E0
+:103140000A000C0B3048FFFF948300369482003451
+:103150001043000E8FBF001894820036A482003402
+:1031600094820056A48200548C82002CAC820024ED
+:1031700094820032A48200309482003CA482003AFF
+:103180008FBF00180A000BCB27BD002003E000080A
+:1031900027BD002027BDFFE8AFBF00108F4A010008
+:1031A0003C0508008CA500E03C02080090424DE47C
+:1031B0003C0C0800958C4DDE01452821304B003F2A
+:1031C00030A2007F03424021396900323C02000AEC
+:1031D0003963003F2C630001010240212D290001C9
+:1031E0002402FF8000A2282401234825AF8A00344E
+:1031F00000801821AF4500240000302100802821E4
+:1032000024070001AF8800283C04080024844DD81E
+:10321000AF8C002415200007A380002D240200207D
+:103220005562000F006020213402FFFF5582000C20
+:10323000006020212402002015620005000000002B
+:103240008C6300142402FFFF1062000700000000DE
+:103250000E000921000000000A000C6800000000B8
+:103260000E00098C016028210E000C0000000000F7
+:103270008FBF001024020C8027BD001803E0000857
+:10328000AF4200243C0208008C4200E027BDFFA0B2
+:10329000AFB1003C008210212411FF80AFBE005866
+:1032A000AFB70054AFB20040AFB00038AFBF005C62
+:1032B000AFB60050AFB5004CAFB40048AFB3004458
+:1032C000005110248F4800248F4900288F47002880
+:1032D000AF4200243C0208008C4200E000809021B4
+:1032E00024060006008210213042007F034218218C
+:1032F0003C02000A006280213C02001F3442FF8031
+:1033000000E2382427A40010260500F00122F02452
+:103310000102B8240E0005B5AFA700308FA2001837
+:10332000AE0200C48FA2001CAE0200C88FA200240F
+:10333000AE0200CC93A40010920300D12402FF80BF
+:103340000082102400431025304900FF3083007FA5
+:103350003122007F0062102A10400004000310C0D8
+:1033600001311026304900FF000310C0000319404E
+:10337000006218213C0208008C4200DC920400D25A
+:10338000024210210043102100511024AF420028B6
+:1033900093A300103063007F000310C000031940A6
+:1033A000006218213C0208008C4200DC024210211D
+:1033B000004310213042007F034218213C02000CE0
+:1033C000006240218FA300142402FFFF106200302E
+:1033D000309500FF93A2001195030014304400FFC4
+:1033E0003063FFFF0064182B1060000D0000000028
+:1033F000950400148D07001C8D0600183084FFFF13
+:1034000000442023000421000000102100E43821A2
+:1034100000E4202B00C230210A000CE200C430215D
+:10342000950400148D07001C8D0600183084FFFFE2
+:1034300000822023000421000000102100801821B8
+:1034400000C2302300E4202B00C4302300E33823E3
+:10345000AD07001CAD06001893A20011A5020014D0
+:1034600097A20012A50200168FA20014AD02001050
+:103470008FA20014AD02000C93A20011A50200203F
+:1034800097A20012A50200228FA20014AD02002410
+:103490002406FF80024610243256007FAF420024EB
+:1034A000035618213C02000A006280218E02004C63
+:1034B0008FA200203124007F000428C0AE020050FB
+:1034C0008FA200200004214000852821AE02007058
+:1034D00093A2001001208821A202008393A2001071
+:1034E000A2020079920200853042003FA2020085CC
+:1034F0003C0208008C4200DC0242102100451021F1
+:1035000000461024AF42002C3C0208008C4200E42C
+:103510003C0308008C6300DC0242102100441021AF
+:1035200000461024AF4200283C0208008C4200E410
+:103530000243182100651821024210210044102185
+:103540003042007F3063007F93A5001003422021AA
+:10355000034318213C02000E006240213C02000C93
+:1035600010B1008C008248213233007F16600019B0
+:103570002404FF803C0208008C4200DC024210213F
+:1035800000441024AF42002C3C0208008C4200E4AE
+:103590003C0308008C6300DC02421021004410242C
+:1035A000AF4200283C0208008C4200E4024318218C
+:1035B0003063007F024210213042007F034220210D
+:1035C000034318213C02000E006240213C02000C23
+:1035D000008248219124000D2414FF800000102156
+:1035E00000942025A124000D9504000295050014E7
+:1035F0008D07001C3084FFFF30A5FFFF8D060018EB
+:10360000008520230004210000E4382100C230217D
+:1036100000E4202B00C43021AD07001CAD060018CB
+:1036200095020002A5020014A50000168D020008F4
+:10363000AD0200108D020008AD02000C95020002E0
+:10364000A5020020A50000228D020008AD02002482
+:103650009122000D3042004010400042262200011D
+:103660003C0208008C4200E0A3B300283C10000A92
+:103670000242102100541024AF4200243C020800F2
+:103680008C4200E0A380002C27A4002C02421021D1
+:103690003042007F03421821007018218C6200D84C
+:1036A0008D26000427A50028AFA9002C0046102174
+:1036B000AC6200D80E000A79AF83002893A30028DB
+:1036C0008F8200280E0006BEA04300D10E000C0021
+:1036D0000000000002541024AF4200243C02080005
+:1036E0008C4200DC00132940001320C000A42021DC
+:1036F000024210210044102100541024AF42002C3B
+:103700003C0208008C4200E43C0308008C6300DCAF
+:10371000035630210242102100451021005410248C
+:10372000AF4200283C0208008C4200E4024318210A
+:103730000064182102421021004510213042007F10
+:103740003063007F03422021034318213C02000E16
+:10375000006240213C02000C00D080210082482100
+:10376000262200013043007F14750005304400FF1D
+:103770002403FF800223102400431026304400FF5E
+:1037800093A2001000808821250800281444FF76A9
+:103790002529002093A400108FA300142402FFFF0A
+:1037A0001062000A308900FF248200012483000196
+:1037B0003042007F14550005306900FF2403FF806C
+:1037C0000083102400431026304900FF9202007845
+:1037D000305300FF11330032012088213C020800E1
+:1037E0008C4200DC3225007F000520C00005294006
+:1037F00000A42021024210212406FF800044102151
+:1038000000461024AF42002C3C0308008C6300DC0F
+:103810003C0208008C4200E40243182102421021BD
+:103820000045102100641821004610243063007FF9
+:10383000AF420028034318213C02000E00624021E1
+:103840003C0208008C4200E48D06000C010020219F
+:1038500002421021004510213042007F034218210E
+:103860003C02000C0062482110C0000D01202821FC
+:103870000E0006E2000000002402FF80022218244D
+:1038800026240001006228263082007F14550002A1
+:10389000308300FF30A300FF1473FFD00060882145
+:1038A0008E0300743C027FFF3442FFFF0062182445
+:1038B000AE0300740E00070302402021AF5700241E
+:1038C0008FA20030AF5E00288FBF005C8FBE005813
+:1038D0008FB700548FB600508FB5004C8FB400489E
+:1038E0008FB300448FB200408FB1003C8FB00038DE
+:1038F00027BD006003E00008AF42002C27BDFFD8C1
+:10390000AFB1001CAFBF0020AFB000182751018835
+:10391000922200032408FF803C03000A3047007F06
+:10392000A3A700108F4601803C0208008C4200E0F3
+:10393000AF86003400C2282100A81024AF42002422
+:103940009224000030A2007F034210210043102186
+:10395000AF8200283084007F2402000214820025F8
+:10396000000719403C0208008C4200E400C210210C
+:103970000043282130A2007F0342182100A8102410
+:10398000AF4200283C02000C006218219062000D3A
+:10399000AFA3001400481025A062000D8FA30014EF
+:1039A0009062000D304200405040006A8FBF0020FE
+:1039B0008F860028A380002C27A400148CC200D876
+:1039C0008C63000427A50010004310210E000A7923
+:1039D000ACC200D893A300108F8200280E0006BE50
+:1039E000A04300D10E000C00000000000A000EA34E
+:1039F0008FBF00200E0006C700C020210E0006D594
+:103A0000000000003C0200080342802192230001D4
+:103A10009202007B1443004F8FBF002092220000CF
+:103A20003044007F24020004108200172882000521
+:103A30001040000624020005240200031082000743
+:103A40008FB1001C0A000EA40000000010820012BA
+:103A50008FBF00200A000EA48FB1001C92050083C6
+:103A6000920600788E0700748F84003430A500FF22
+:103A700000073E0230C600FF0E00070B30E7007F54
+:103A80000A000EA38FBF00200E000C6F8F8400343D
+:103A90000A000EA38FBF002024020C80AF42002436
+:103AA0009202003E30420040104000200000000022
+:103AB0009202003E000216000002160304410006B6
+:103AC000000000008F8400340E00063824050093A7
+:103AD0000A000EA38FBF00209202003F24030018AB
+:103AE000304200FF1443000C8F8400342405003959
+:103AF0000E0005D0000030210E0003028F84003438
+:103B000024020012A202003F0E00030B8F84003437
+:103B10000A000EA38FBF0020240500360E0005D03A
+:103B2000000030210A000EA38FBF00200E00030208
+:103B30008F8400349202000534420020A202000566
+:103B40000E00030B8F8400340E0010588F84003455
+:103B50008FBF00208FB1001C8FB0001824020C8092
+:103B600027BD002803E00008AF42002427BDFFE87E
+:103B7000AFB00010AFBF00142743010094620008EB
+:103B8000000214000002140304410002000080211E
+:103B90002410000194620008304200801040001A96
+:103BA00002001021946200083042200010400016EC
+:103BB000020010218C6300183C021C2D344219EDC8
+:103BC000240600061062000F3C0760213C0208003A
+:103BD0008C4200D4104000078F8200288F83002879
+:103BE000906200623042000F34420040A0620062E6
+:103BF0008F8200288F840034944500D40E000B89F6
+:103C000030A5FFFF020010218FBF00148FB00010FD
+:103C100003E0000827BD001827BDFFE0AFB1001486
+:103C2000AFB00010A380002CAFBF00188F4501007B
+:103C30003C0308008C6300E02402FF80AF85003461
+:103C400000A318213064007F03442021006218245F
+:103C50003C02000A00822021AF43002427500100CB
+:103C60008E0200148C8300DCAF84002800431023F4
+:103C700018400004000088218E0200140E000B1C66
+:103C8000AC8200DC9202000B24030002304200FFF1
+:103C90001443002F0000000096020008304300FF8C
+:103CA0002402008214620005240200840E0009D65A
+:103CB000000000000A000F2F00000000146200093D
+:103CC000240200818F8200288F8400343C07602109
+:103CD000944500D49206000530A5FFFF0A000F1E90
+:103CE00030C600FF14620027000000009202000AA4
+:103CF000304300FF3062002010400004306200407A
+:103D00008F8400340A000F1A24060040104000047B
+:103D1000000316008F8400340A000F1A24060041A5
+:103D200000021603044100178F8400342406004269
+:103D30008F8200283C076019944500D430A5FFFF0E
+:103D40000E000B89000000000A000F2F0000000089
+:103D50009202000B24030016304200FF10430006BD
+:103D6000000000009202000B24030017304200FF05
+:103D700014430004000000000E000EA90000000023
+:103D8000004088210E000C00000000009202000A92
+:103D9000304200081040000624020C808F85002865
+:103DA0003C0400080E0012860344202124020C80EB
+:103DB000AF4200248FBF0018022010218FB00010E6
+:103DC0008FB1001403E0000827BD002027BDFFE8E5
+:103DD000AFBF0014AFB000108F5000243C030800A8
+:103DE0008C6300E08F4501002402FF8000A31821AE
+:103DF0003064007F03442021006218243C02000A42
+:103E000000822021AF850034AF43002490820062FD
+:103E1000AF8400283042000F34420050A08200627C
+:103E20003C02001F3442FF800E0006BE02028024C6
+:103E3000AF5000248FBF00148FB0001003E00008C3
+:103E400027BD00183C0208008C4200201040001DD5
+:103E50002745010090A300093C02000803422021ED
+:103E600024020018546200033C0200080A000F708C
+:103E700024020008034220212402001614620005D7
+:103E80002402001724020012A082003F0A000F7AC9
+:103E900094A700085462000694A7000893620005E6
+:103EA0002403FFFE00431024A362000594A700082A
+:103EB00090A6001B8CA4000094A500060A000B64C9
+:103EC00000073C0003E00008000000002744010058
+:103ED00094820008304500FF38A3008238A2008495
+:103EE0002C6300012C4200010062182510600006BE
+:103EF000240200839382002D1040000D000000007A
+:103F00000A000C330000000014A2000524A2FF8068
+:103F10008F4301043C02602003E00008AC4300141E
+:103F2000304200FF2C420002104000032402002215
+:103F30000A000ED40000000014A2000300000000DC
+:103F40000A000F41000000000A000F5F000000009F
+:103F50009363007E9362007A1443000900002021DD
+:103F60009362000024030050304200FF1443000419
+:103F7000240400019362007E24420001A362007EBB
+:103F800003E00008008010218F4201F80440FFFE8A
+:103F900024020002AF4401C0A34201C43C0210004D
+:103FA00003E00008AF4201F827BDFFE8AFBF0010F3
+:103FB0009362003F2403000A304200FF144300468E
+:103FC000000000008F6300548F62004C1062007D7F
+:103FD000036030219362000024030050304200FF50
+:103FE0001443002F000000008F4401403C020800F1
+:103FF0008C4200E02403FF80008210210043102443
+:10400000AF4200243C0208008C4200E08F6500545F
+:104010003C03000A008220213084007F03441021E9
+:1040200000431021AC4501089762003C8F63004CAF
+:104030003042FFFF0002104000621821AF63005CB5
+:104040008F6300548F64004C9762003C0064182317
+:104050003042FFFF00031843000210400043102AC3
+:1040600010400006000000008F6200548F63004C77
+:10407000004310230A000FF0000210439762003C37
+:104080003042FFFF00021040ACC200642402000175
+:10409000A0C0007CA0C2008424020C80AF42002497
+:1040A0000E000FA28F440140104000478FBF001048
+:1040B0008F4301408F4201F80440FFFE24020002BA
+:1040C000AF4301C0A34201C43C021000AF4201F85B
+:1040D0000A0010408FBF00109362003F24030010BD
+:1040E000304200FF14430004000000008F440140F0
+:1040F0000A00102C000028219362003F24030016C0
+:10410000304200FF1443000424020014A362003F65
+:104110000A00103A000000008F62004C8F630050CC
+:1041200000431023044100288FBF001093620081D8
+:1041300024420001A3620081936200812C420004AA
+:1041400014400010000000009362003F24030004AC
+:10415000304200FF14430006000000008F4401407D
+:104160008FBF0010240500930A00063827BD0018F1
+:104170008F440140240500938FBF00100A0006A75A
+:1041800027BD00188F4401400E000302000000000C
+:104190008F6200542442FFFFAF6200548F620050D0
+:1041A0002442FFFFAF6200500E00030B8F4401401A
+:1041B0008F4401408FBF0010240500040A00031043
+:1041C00027BD00188FBF001003E0000827BD0018AE
+:1041D0008F4201889363007E00021402304400FF86
+:1041E000306300FF1464000D000000009362008043
+:1041F000304200FF1044000900000000A36400806A
+:104200009362000024030050304200FF1443000476
+:10421000000000000A00076F8F440180A364008043
+:1042200003E000080000000027BDFFE8AFB0001069
+:10423000AFBF001493620005240300303042003009
+:1042400014430089008080213C0208008C42002039
+:1042500010400080020020210E00052B000000000D
+:104260008F850020ACB000009362003E9363003F56
+:10427000304200FF00021200306300FF00431025AF
+:10428000ACA2000493620082000216000002160332
+:1042900004410005000000003C0308008C63004856
+:1042A0000A00107E000000009362003E3042004091
+:1042B000144000030000182193620081304300FF86
+:1042C0009362008200031E00304200FF00021400CF
+:1042D00000621825ACA300088F620040ACA2000C5D
+:1042E0008F620048ACA200108F62004CACA2001498
+:1042F0008F6200508F63004C004310230441000381
+:10430000000000000A0010928F62004C8F62005083
+:10431000ACA200183C02080094424DBE3C03C00B06
+:1043200000002021004310250E000550ACA2001C07
+:104330008F6200548F840020AC8200008F6200588E
+:10434000AC8200048F62005CAC8200088F62006067
+:104350008F43007400431021AC82000C8F62006414
+:10436000AC820010976300689762006A00031C002B
+:104370003042FFFF00621825AC8300149362008274
+:1043800024030080304200FF1443000300000000BB
+:104390000A0010C6AC8000188F63000C24020001D4
+:1043A0001062000E2402FFFF9362003E3042004084
+:1043B0001440000A2402FFFF8F63000C8F42007438
+:1043C000006218233C02080000621024144000021E
+:1043D000000028210060282100051043AC8200184D
+:1043E0003C02080094424DBE3C03C00C000020215A
+:1043F000004310258F8300200E000550AC62001C86
+:104400008F6200188F8300203C05080094A54DBEE4
+:1044100024040001AC620000AC6000048F66006CF4
+:104420003C02400D00A22825AC6600088F6200DC2B
+:10443000AC62000CAC600010936200050002160034
+:10444000AC620014AC6000180E000550AC65001C96
+:10445000020020218FBF00148FB00010A360000560
+:104460000A0004B927BD00188FBF00148FB00010D8
+:1044700003E0000827BD00189742007C30C600FF0B
+:10448000A08600843047FFFF2402000514C2000B01
+:1044900024E3465090A201122C420007104000076E
+:1044A00024E30A0090A30112240200140062100405
+:1044B00000E210210A0010FE3047FFFF3067FFFFC7
+:1044C00003E00008A4870014AC87004C8CA201080C
+:1044D0000080402100A0482100E2102330C600FFE8
+:1044E0001840000393AA001324E2FFFCACA20108C9
+:1044F00030C2000110400008000000008D02005092
+:1045000000E2102304410013240600058D0200542C
+:1045100010E20010000000008D02005414E2001AA6
+:10452000000000003C0208008C4200D8304200200D
+:104530001040000A240200019103007891020083D8
+:10454000144300062402000101002021012028213B
+:10455000240600040A0010EC00000000A100008402
+:1045600011400009A50200148F4301008F4201F899
+:104570000440FFFE24020002AF4301C0A34201C475
+:104580003C021000AF4201F803E000080000000008
+:1045900027BDFFE88FA90028AFBF00100080402191
+:1045A00000E918231860007330C600FFA080007C6B
+:1045B000A08000818CA2010800E210230440004D7D
+:1045C000000000008C8200509483003C8C840064C6
+:1045D000004748233063FFFF012318210083202B6D
+:1045E00010800004000000008D0200640A00114FDA
+:1045F00000E210219502003C3042FFFF0122102111
+:1046000000E21021AD02005C9502003C8D03005CCD
+:104610003042FFFF0002104000E210210043102B47
+:1046200010400003000000000A00115E8D02005CD3
+:104630009502003C3042FFFF0002104000E21021D2
+:10464000AD02005CA1000084AD07004C8CA2010803
+:1046500000E210231840000224E2FFFCACA2010893
+:1046600030C200011040000A000000008D0200501E
+:1046700000E2102304410004010020218D020054B7
+:1046800014E20003000000000A0011802406000567
+:104690008D02005414E200478FBF00103C02080056
+:1046A0008C4200D8304200201040000A2402000151
+:1046B0009103007891020083144300062402000154
+:1046C00001002021240600048FBF00100A0010EC16
+:1046D00027BD0018A1000084A50200148F4301002B
+:1046E0008F4201F80440FFFE240200020A0011A5D7
+:1046F000000000008C82005C004910230043102B56
+:1047000054400001AC87005C9502003C3042FFFF42
+:104710000062102B14400007240200029502003CA6
+:104720008D03005C3042FFFF00621821AD03005C86
+:1047300024020002AD07004CA10200840E000FA26B
+:104740008F4401001040001B8FBF00108F430100F9
+:104750008F4201F80440FFFE24020002AF4301C073
+:10476000A34201C43C021000AF4201F80A0011BB91
+:104770008FBF001030C200101040000E8FBF00101D
+:104780008C83005C9482003C006918233042FFFF58
+:10479000006218213C023FFF3444FFFF0083102BCE
+:1047A000544000010080182101231021AD02005C5B
+:1047B0008FBF001003E0000827BD001827BDFFE8E9
+:1047C0008FAA0028AFBF00100080402100EA4823D4
+:1047D0001920002130C600FF8C83005C8C820064AD
+:1047E000006A18230043102B504000100069182164
+:1047F00094A2011001221021A4A2011094A2011080
+:104800003042FFFF0043102B1440000A3C023FFFE0
+:1048100094A2011000431023A4A201109482003C32
+:104820003042FFFF0A0011DA00621821A4A0011033
+:104830003C023FFF3444FFFF0083102B5440000133
+:104840000080182100671021AD02005CA100007CEF
+:104850000A001222A100008130C200101040003C6A
+:10486000000000008C820050004A102318400038DD
+:10487000000000009082007C24420001A082007CA5
+:104880009082007C3C0308008C630024304200FFCF
+:104890000043102B1440005C8FBF00108CA2010855
+:1048A00000E2102318400058000000008C830054E0
+:1048B0009482003C006A18233042FFFF0003184333
+:1048C000000210400043102A1040000500000000C4
+:1048D0008C820054004A10230A001209000210437F
+:1048E0009482003C3042FFFF00021040AD020064A1
+:1048F0009502003C8D0400649503003C3042FFFFAC
+:1049000000021040008220213063FFFF0083182145
+:1049100001431021AD02005C8D020054ACA20108DD
+:1049200024020002A10200840E000FA28F440100A5
+:10493000104000358FBF00108F4301008F4201F8F7
+:104940000440FFFE240200020A00124B0000000097
+:10495000AD07004C8CA2010800E2102318400002B1
+:1049600024E2FFFCACA2010830C200011040000AA2
+:10497000000000008D02005000E2102304410004FA
+:10498000010020218D02005414E200030000000009
+:104990000A001242240600058D02005414E2001A97
+:1049A0008FBF00103C0208008C4200D8304200202B
+:1049B0001040000A24020001910300789102008354
+:1049C00014430006240200010100202124060004F3
+:1049D0008FBF00100A0010EC27BD0018A100008452
+:1049E000A50200148F4301008F4201F80440FFFE2E
+:1049F00024020002AF4301C0A34201C43C021000E4
+:104A0000AF4201F88FBF001003E0000827BD001877
+:104A10008FAA00108C8200500080402130C600FF19
+:104A2000004A102300A048211840000700E0182188
+:104A300024020001A0800084A0A00112A48200141E
+:104A40000A0011BDAFAA0010A0800081AD07004C84
+:104A50008CA2010800E210231840000224E2FFFCAF
+:104A6000ACA2010830C200011040000800000000A4
+:104A70008D0200500062102304410013240600053B
+:104A80008D02005410620010000000008D020054DE
+:104A900014620011000000003C0208008C4200D8A3
+:104AA000304200201040000A2402000191030078E7
+:104AB000910200831443000624020001010020211A
+:104AC00001202821240600040A0010EC0000000048
+:104AD000A1000084A502001403E00008000000000B
+:104AE00027BDFFE0AFBF0018274201009046000A33
+:104AF0008C4800148C8B004C9082008430C900FFDD
+:104B000001681823304A00FF1C60001A2D46000679
+:104B1000240200010142100410C0001630430003BB
+:104B2000012030210100382114600007304C000CB6
+:104B300015800009304200301440000B8FBF001870
+:104B40000A0012AC000000000E0011BDAFAB001057
+:104B50000A0012AC8FBF00180E001132AFAB00106C
+:104B60000A0012AC8FBF0018AFAB00100E0012523B
+:104B7000AFAA00148FBF001803E0000827BD002073
+:104B800024020003A08200848C82005403E0000809
+:104B9000ACA201083C020008034218219062008187
+:104BA000240600433C07601924420001A0620081F2
+:104BB000906300813C0208008C4200C0306300FF1B
+:104BC000146200102403FF803C0208008C4200E0C5
+:104BD0000082102100431024AF4200243C02080050
+:104BE0008C4200E03C03000A008210213042007F2A
+:104BF0000342102100431021944500D40A000B8980
+:104C000030A5FFFF03E000080000000027BDFFE023
+:104C1000AFBF0018AFB10014AFB000108F420180D9
+:104C20000080802100A088210E0012B300402021C6
+:104C3000A20000848E0200548FBF00188FB00010B5
+:104C4000AE2201088FB1001403E0000827BD002048
+:104C500027BDFFE03C020008AFB00010AFBF001856
+:104C6000AFB10014034280218F51014092030084B0
+:104C70008E0400508E02004C14820040306600FF0B
+:104C80003C0208008C4200E02403FF800222102135
+:104C900000431024AF4200243C0208008C4200E094
+:104CA0009744007C92050081022210213042007F4F
+:104CB000034218213C02000A0062182114A0000BD4
+:104CC0003084FFFF2402000554C20014248205DC56
+:104CD0009062011224420001A062011224020C80A1
+:104CE000AF4200240A00130B24020005A060011249
+:104CF0002402000514C20009248205DC920200810E
+:104D00002C4200075040000524820A0092030081D3
+:104D10002402001400621004008210213044FFFFBE
+:104D2000A60400140E0012B3022020219602003CBB
+:104D30008E03004C022020213042FFFF0002104071
+:104D4000006218210E000302AE03005C9202007D97
+:104D500002202021344200400E00030BA202007DFD
+:104D60008F4201F80440FFFE24020002AF5101C04F
+:104D7000A34201C43C021000AF4201F88FBF0018EB
+:104D80008FB100148FB0001003E0000827BD002091
+:104D900008000D9808000DE008000E2008000E6CB9
+:044DA00008000EA059
+:0C4DA4000A0000220000000000000000D7
+:104DB0000000000D6370352E302E306A3300000085
+:104DC00005000004000000000000000000000000DA
+:104DD00000000000000000000000000000000000D3
+:104DE00000000000000000000000000000000020A3
+:104DF00000000000000000000000000000000000B3
+:104E000000000000000000000000000000000000A2
+:104E10000000000000000000000000000000000191
+:104E20000000002B00000000000000000000000057
+:104E300010000003000000000000000D0000000D45
+:104E40003C02080024425AC43C03080024636190D9
+:104E5000AC4000000043202B1480FFFD24420004DE
+:104E60003C1D080037BD7FFC03A0F0213C1008006A
+:104E7000261000883C1C0800279C5AC40E0001A67E
+:104E8000000000000000000D27BDFFE83C0960188D
+:104E9000AFBF00108D2C5000240DFF7F240800317F
+:104EA000018D5824356A380C24070C003C1A800008
+:104EB000AD2A50003C04800AAF4800083C1B800823
+:104EC000AF4700240E000938AF8400100E0008FB25
+:104ED000000000000E000848000000000E0012DF75
+:104EE000000000003C0460168C8500003C06FFFFBB
+:104EF0003C02535300A618241062004734867C00FD
+:104F000094C201F2A780002C10400003A78000CCBF
+:104F100038581E1EA798002C94C201F810400004B7
+:104F2000978300CC38591E1EA79900CC978300CCDC
+:104F30002C7F006753E00001240300669784002C57
+:104F40002C82040114400002006028212404040083
+:104F50003C0760008CE904382403103C3128FFFF33
+:104F60001103001F30B9FFFF57200010A38000CEAF
+:104F700024020050A38200CE939F00CE53E0000F86
+:104F8000A78500CCA78000CC978500CC8FBF0010F0
+:104F9000A780002CA7800034A78000E63C01080011
+:104FA000AC25008003E0000827BD0018939F00CEC9
+:104FB00057E0FFF5A78000CCA78500CC978500CCF3
+:104FC0008FBF0010A784002CA7800034A78000E6C4
+:104FD0003C010800AC25008003E0000827BD001854
+:104FE000A38000CE8CCB003C316A00011140000E42
+:104FF0000000000030A7FFFF10E0FFDE2402005099
+:105000008CCC00C83186000114C0FFDC939F00CE19
+:105010000A000074240200518C8F00043C0E6000D2
+:105020000A00005701EE30218CEF0808240D5708C4
+:10503000000F740211CD000430B8FFFF2405006694
+:105040000A000075240404001700FFCC939F00CED3
+:105050000A000074240200508F8600103089FFFF80
+:10506000000939408CC300103C08005000E820259E
+:10507000AF4300388CC5001427420400AF82001CE7
+:10508000AF45003CAF4400300000000000000000CD
+:105090000000000000000000000000000000000010
+:1050A00000000000000000008F4B0000316A00206B
+:1050B0001140FFFD0000000003E0000800000000B8
+:1050C0008F840010948A001A8C8700243149FFFFD6
+:1050D000000940C000E83021AF46003C8C85002428
+:1050E0008F43003C00A3102318400029000000005B
+:1050F0008C8B0020256200013C0D005035AC00086F
+:10510000AF420038AF4C003000000000000000004B
+:10511000000000000000000000000000000000008F
+:1051200000000000000000008F4F000031EE002062
+:1051300011C0FFFD000000008F4A04003C08002061
+:10514000AC8A00108F490404AC890014AF480030C9
+:1051500000000000948600189487001C00C71821E6
+:10516000A48300189485001A24A20001A482001AC6
+:105170009498001A9499001E133800030000000050
+:1051800003E000080000000003E00008A480001A0B
+:105190008C8200200A0000D63C0D00500A0000C797
+:1051A000000000003C0308008C6300208F82001880
+:1051B00027BDFFE810620008AFBF00100E0000FE20
+:1051C000AF8300183C0308008C6300202404000116
+:1051D000106400048F8900108FBF001003E00008E6
+:1051E00027BD00188FBF00103C076012A520000AE1
+:1051F0009528000A34E5001027BD00183106FFFF8E
+:1052000003E00008ACA600903C0208008C4200209D
+:1052100027BDFFC8AFBF0034AFBE0030AFB7002C12
+:10522000AFB60028AFB50024AFB40020AFB3001C68
+:10523000AFB20018AFB1001410400050AFB0001072
+:105240008F840010948600069483000A00C32823EC
+:1052500030B6FFFF12C0004A8FBF00349489001897
+:10526000948A000A012A40233102FFFF02C2382B30
+:1052700014E0000202C02021004020212C8C0005F7
+:10528000158000020080A021241400040E0000AD4F
+:10529000028020218F87001002809821AF800014A7
+:1052A00094ED000A028088211280004E31B2FFFF87
+:1052B0003C1770003C1540003C1E60008F8F001CA6
+:1052C0008DEE000001D718245075005002202021D7
+:1052D00002A3802B160000353C18200050780047B0
+:1052E00002202021241000018F8300141460003953
+:1052F000029158230230F8230250C82133F1FFFFF6
+:105300001620FFEE3332FFFF8F8700103C11002084
+:10531000AF5100300000000094E6000A3C1E60120D
+:1053200037D5001002662821A4E5000A94E2000A9D
+:1053300094F2000A94F400183057FFFF1292003BD9
+:10534000AEB700908CED00148CE400100013714097
+:1053500001AE4021000E5FC3010E502B008B48218F
+:10536000012A1821ACE80014ACE3001002D3382362
+:1053700030F6FFFF16C0FFB98F8400108FBF0034D6
+:105380008FBE00308FB7002C8FB600288FB5002459
+:105390008FB400208FB3001C8FB200188FB100149F
+:1053A0008FB0001003E0000827BD0038107E001BFE
+:1053B000000000001477FFCC241000010E00162A14
+:1053C000000000008F8300141060FFCB0230F82330
+:1053D000029158238F870010017020210A0001914B
+:1053E0003093FFFF8F8300141460FFCB3C1100202B
+:1053F000AF5100300A00015D000000000E0007A15F
+:10540000024028210A000151004080210E00034B78
+:10541000024028210A000151004080210E0014F2B0
+:10542000022020210A000151004080210E0000C707
+:10543000000000000A00017302D3382327BDFFE8F3
+:10544000AFB00010AFBF00140E0000390000000024
+:105450003C028000345000700A0001B48E06000047
+:105460008F4F000039EE000131C2000110400024CE
+:105470008F8600A88E0700003C0C08008D8C003C35
+:105480003C0908008D29003800E66823018D282199
+:105490000000502100AD302B012A402101062021BF
+:1054A0003C010800AC25003CAF8700A83C01080087
+:1054B000AC2400380E000100000000003C0308008E
+:1054C0008C6300701060FFE6006020213C0508003E
+:1054D0008CA500683C0608008CC6006C0E0015B94F
+:1054E000000000003C010800AC2000708F4F00005D
+:1054F00039EE000131C200011440FFDE8F8600A8A2
+:105500008E0A00008F8B00A83C0508008CA5003C8B
+:105510003C0408008C840038014B482300A9382142
+:105520000082182100E9402B006810213C0108008E
+:10553000AC27003C3C010800AC2200388F5F010022
+:105540002419FF0024180C0003F9202410980012DD
+:10555000AF840000AF440020936D0000240C0020B5
+:1055600031A600FF10CC0012240E005010CE000413
+:105570003C194000AF5901380A0001AD000000009D
+:105580000E001255000000003C194000AF590138D0
+:105590000A0001AD000000000E000119000000002B
+:1055A0003C194000AF5901380A0001AD000000006D
+:1055B0008F58010000802821330F00FF01E02021D7
+:1055C0000E0002F8AF8F00043C194000AF590138BB
+:1055D0000A0001AD0000000000A4102B240300010C
+:1055E00010400009000030210005284000A4102BC5
+:1055F00004A00003000318405440FFFC00052840AD
+:105600005060000A0004182B0085382B54E0000479
+:105610000003184200C330250085202300031842F0
+:105620001460FFF9000528420004182B03E000086D
+:1056300000C310213084FFFF30A5FFFF8F4201B867
+:105640000440FFFE3C074080008730253C031000EB
+:10565000AF400180AF450184AF46018803E00008F8
+:10566000AF4301B83084FFFF8F4201B80440FFFE12
+:105670003C0740388CA60000008728253C0310001A
+:10568000AF460180AF45018803E00008AF4301B891
+:105690008F8300388F8600301066000B0080402119
+:1056A0003C07080024E75C38000328C000A710214D
+:1056B0008C44000024630001108800053063000F53
+:1056C0005466FFFA000328C003E000080000102120
+:1056D0003C07080024E75C3C00A7302103E00008F9
+:1056E0008CC200003C03900034620001008220253F
+:1056F000AF4400208F45002004A0FFFE0000000002
+:1057000003E00008000000003C0380003462000158
+:105710000082202503E00008AF44002027BDFFE001
+:10572000AFB100143091FFFFAFB00010AFBF001851
+:105730001220001500A080218CA5000010A00013ED
+:10574000240400020E000C7F24060140AE0000007D
+:105750008F4201B80440000D000028213C064000A3
+:10576000022620258FBF00188FB100148FB00010C3
+:105770003C03100027BD0020AF450180AF440188E5
+:1057800003E00008AF4301B88CA500008F4201B8C8
+:105790000440FFFE3C064000022620258FBF001873
+:1057A0008FB100148FB000103C03100027BD002003
+:1057B000AF450180AF44018803E00008AF4301B862
+:1057C0003086FFFF8F4201B80440FFFE3C094006CF
+:1057D0008CA8000000C93825AF4801808CA40004C3
+:1057E0003C031000AF440184AF47018803E0000888
+:1057F000AF4301B827BDFFE0AFB00010AFBF001846
+:10580000AFB100149363003E008080210080282106
+:1058100030620040000020211040000F8E11000077
+:105820000E00087402202021936700002404005019
+:1058300030E500FF50A400128E0F0000022020214E
+:105840008FBF00188FB100148FB00010A762013C09
+:105850000A00093427BD00200E0002870000000066
+:105860000E000874022020219367000024040050D9
+:1058700030E500FF14A4FFF2022020218E0F00006B
+:105880003C1008008E1000503C0D000C240BFF80D3
+:1058900001F05021314E007F01DA6021018D40215D
+:1058A000014B4824AF490028022020218FBF001857
+:1058B0008FB100148FB00010A50200D627BD0020C4
+:1058C0000A000934AF8800D027BDFFE0AFBF001841
+:1058D000AFB10014AFB000109366000100808021CA
+:1058E0000E00025030D1000493640005001029C25C
+:1058F000A765000034830040A36300050E00025931
+:10590000020020210E00093602002021240200019D
+:10591000AF62000C02002821A762001024040002DC
+:10592000A762001224060140A76200140E000C7F3B
+:10593000A76200161620000F8FBF0018978C003446
+:105940003C0B08008D6B00782588FFFF3109FFFFB5
+:10595000256A0001012A382B10E00006A7880034D0
+:105960003C0F6006240E001635ED0010ADAE005061
+:105970008FBF00188FB100148FB0001003E0000833
+:1059800027BD002027BDFFE0AFB10014AFBF001856
+:10599000AFB0001000A088211080000A3C03600016
+:1059A0002402008010820012000000000000000DA0
+:1059B0008FBF00188FB100148FB0001003E00008F3
+:1059C00027BD00208C682BF80500FFFE00000000BA
+:1059D000AC712BC08FBF00188FB100148FB00010B6
+:1059E0003C09100027BD002003E00008AC692BF83B
+:1059F0000E00025000A02021936500050220202106
+:105A00000E00025930B000FF2403003E1603FFE7EA
+:105A1000000000008F4401780480FFFE2407000787
+:105A20003C061000AF51014002202021A347014451
+:105A30008FBF00188FB100148FB00010AF460178EF
+:105A40000A0002C927BD002027BDFFE8AFBF001430
+:105A5000AFB000108F500020000000000E0009368B
+:105A6000AF440020AF5000208FBF00148FB0001053
+:105A700003E0000827BD00183084FFFF8F4201B803
+:105A80000440FFFE3C074035008730253C031000F2
+:105A9000AF450180AF400184AF46018803E00008B4
+:105AA000AF4301B83084FFFF8F4201B80440FFFECE
+:105AB0003C074036008730253C031000AF4501808D
+:105AC000AF400184AF46018803E00008AF4301B84E
+:105AD00027BDFFD0AFB3001C3093FFFFAFB500244C
+:105AE000AFB20018AFBF0028AFB40020AFB10014B0
+:105AF000AFB0001030B5FFFF12600027000090210A
+:105B00008F90001C8E0300003C06800024020040A1
+:105B100000033E0200032C0230E4007F006688246C
+:105B20001482001D30A500FF8F8300282C68000A16
+:105B3000510000108F910014000358803C0C0800A5
+:105B4000258C58D0016C50218D490000012000089F
+:105B50000000000002B218213065FFFF0E00022491
+:105B600024040084162000028F90001CAF800028BF
+:105B70008F910014260C0020264B0001018080210B
+:105B80003172FFFF16200004AF8C001C0253282B3B
+:105B900014A0FFDC00000000024010218FBF00288D
+:105BA0008FB500248FB400208FB3001C8FB2001873
+:105BB0008FB100148FB0001003E0000827BD003043
+:105BC000240D003414AD00F600000000920B000E0E
+:105BD000240A16803C07000CA36B00219203000DE1
+:105BE0000347F8213C066000A363002096110012D1
+:105BF0003C057FFF34ACFFFFA771003C960200100C
+:105C0000240B00053054FFFFAF7400848E19001C74
+:105C1000AF4A00288FF800008CCF44480319702643
+:105C200001EE3021AF66004C8F69004C24CD00019D
+:105C30003C197F00AF6900508F640050AF6400547E
+:105C4000AF660070AF6D00588F6800582404005094
+:105C5000AF68005CA3600023AF6C0064A36B0037E7
+:105C60008E030014AF6300488F710048AF710024A9
+:105C70008E020018AF62006C9214000CA374003600
+:105C8000936A003E355F0020A37F003E8F7800744A
+:105C90000319782435EE4000AF6E0074936900005C
+:105CA000313000FF1204022B2418FF803C0408004E
+:105CB00024845CB80E000294000000002406000456
+:105CC000240700013C0408008C845CB8A366007DB6
+:105CD000A36700058F4A01780540FFFE24020002F9
+:105CE000AF440140A34201448F90001C3C141000BB
+:105CF000AF5401780A000373AF8000282CAD003741
+:105D000051A0FF9C8F9100140005A0803C18080052
+:105D1000271858F8029878218DEE000001C000087D
+:105D2000000000002406000614A600110000000078
+:105D30003C1F08008FFF5CB824040005AF5F002003
+:105D40008E190018AF7900188F78004CAF78001CBE
+:105D50008F6F0050122000C2AF6F00700A000373F3
+:105D6000AF840028240A000710AA00842403000638
+:105D70003C05080024A55CB80E00025E24040081E6
+:105D80008F90001C0011102B0A000373AF820028B3
+:105D90002402000414A2FFF6240A00503C09080063
+:105DA0008D295CB8AF4900208E040008AF64004024
+:105DB0008E060008AF6600448E07000CAF670048EF
+:105DC0008E0D0010AF6D004C8E080010AF6800847F
+:105DD0008E050014AF6500508E0C0018AF6C005497
+:105DE0008E0B001CAF6B005893740000328300FFD1
+:105DF000106A01ED000000008F6700488F660040C8
+:105E000000E6682305A000042404008C1620FFDEB1
+:105E100024020003240400823C05080024A55CB889
+:105E20000E000287000000008F90001C000010216F
+:105E30000A000373AF8200282404000514A4FFCCD9
+:105E4000240520003C1F08008FFF5CB8AF5F0020D6
+:105E50008E190004AF79005C921800082410000825
+:105E6000A37800218F8F001C91EE0009A36E002003
+:105E70008F86001C90C9000A312400FF109000108A
+:105E8000288A00091540006C24020002240C00201E
+:105E9000108C000B340580002885002114A0000818
+:105EA0002405400024080040108800053C0500013E
+:105EB000240D0080108D00023C05000224054000E6
+:105EC0008F6E00743C0FFF0001CF48240125802510
+:105ED000AF70007490C4000BA36400818F84001C19
+:105EE0009487000C10E0019300000000948E000CD9
+:105EF000241FFFBF24060004A76E003C9089000EFB
+:105F0000A369003E8F90001C9204000FA364003F21
+:105F10008F94001C8E8D00108F47007401A74023C2
+:105F2000AF6800608E850014AF650064968C001821
+:105F3000A76C0068968B001AA76B006A8E83001C02
+:105F4000AF63006C96820002A762013E928A000E47
+:105F5000A36A003E9379003E033FC02412200166ED
+:105F6000A378003E8F90001C0A000373AF860028C0
+:105F70002414002214B4FF7E240300073C0208000E
+:105F80008C425CB81220000CAF4200200A00037360
+:105F9000AF830028240C003310AC00142405002823
+:105FA0003C05080024A55CB80E00023024040081E2
+:105FB0000A0003F88F90001C3C04080024845CB89D
+:105FC0000E00029400000000936B000024110050AA
+:105FD000316300FF10710150000000008F90001C21
+:105FE000000018210A000373AF8300283C08080052
+:105FF0008D085CB824040081AF480020A3650034FC
+:106000003C05080024A55CB80E000230000000002A
+:106010008F90001C240200090A000373AF8200283D
+:1060200002B288213225FFFF0E00022424040084DE
+:106030000A0003738F90001C1082FFA12405040046
+:10604000288300031060016E240B00042414000157
+:106050005494FF9B240540000A00044724050100D6
+:106060003C04080024845CB88F62004C0E0002944B
+:106070008F6300508F90001C000020210A000373E2
+:10608000AF8400288E1000042404008AAF50002042
+:10609000936E000531C900021520015D0200282120
+:1060A0009378002302002821330F002015E00158C7
+:1060B0002404008D9362003F24190012305F00FF1A
+:1060C00013F90153240400810E0002500200202124
+:1060D00093740023240A0004020020213683004226
+:1060E000A36300230E000259A36A007D8F4B017841
+:1060F0000560FFFE24050002AF500140A3450144A6
+:106100008F90001C3C0C1000AF4C01780A0003F982
+:106110000011102B8E100004AF500020936D00056D
+:1061200031A80002550001782404008A9364003FDE
+:106130002407000402002821308600FF10C7001049
+:10614000240400810E00025002002021937F0023CE
+:1061500024180012240FFFFE37F90020A379002332
+:10616000A378003F936E00050200202101CF482450
+:106170000E000259A3690005020028210000202119
+:106180000E000340000000000A0003F88F90001C7E
+:106190008E0500043C0F0008034F4021AF4500204E
+:1061A000910E00002406005031C900FF1126017A2B
+:1061B000240400888F5901B80720FFFE3C0C400ED4
+:1061C000008C58253C031000AF450180AF4001848E
+:1061D000AF4B0188AF4301B891020000240AFF8051
+:1061E00024040004004AF825A11F00000E000C7FC3
+:1061F000240600300A0003F88F90001C8E0F000464
+:106200003C14080026945CB83C010800AC2F5CB834
+:10621000AF4F0020920E000331C90004112000028C
+:106220002402001224020006A362003F9203001B16
+:10623000240AFFC03062003F004AF825A37F003ED9
+:1062400092190003333800011700012200000000FA
+:106250008E020008AE8200083C0208008C425CC03E
+:106260001040012D00000000000221C2A7640008B8
+:106270008E0D000C240B000124140014AF6D002CB3
+:106280008E080010AF68003096050016A76500382C
+:10629000960C0014A76C003AAF6B000CA76B0010B3
+:1062A000A76B0012A76B0014A76B00161220014AFF
+:1062B000A37400349206000330C700022CF00001E2
+:1062C000260200088F90001C0A000373AF8200288A
+:1062D0008E14000424030081AF540020936800232F
+:1062E0003105001010A00113000000008F4401B818
+:1062F0000480FFFE3C06401F0011382B006610256D
+:106300003C111000AF540180AF870028AF400184DA
+:10631000AF420188AF5101B80A0003748F91001495
+:106320008E0600043C19000803592021AF460020C6
+:106330008E07000890980000240F0050331400FFCF
+:10634000128F0106240500888F4401B80480FFFEE7
+:106350003C0D40090011602B00AD10253C111000D0
+:10636000AF460180AF8C0028AF470184AF4201885F
+:10637000AF5101B80A0003748F9100148E04001C01
+:106380000E00023B00000000104000D700404821F2
+:106390008F90001C240500898F4D01B805A0FFFED9
+:1063A00000000000AF4901808E0F001C3C1440012A
+:1063B0000011702B00B448253C111000AF4F018430
+:1063C000AF8E0028AF490188AF5101B80A000374AD
+:1063D0008F910014961900023C14080026945CB8B2
+:1063E000333800041300008E3C0260008E1F001C36
+:1063F0003C010800AC3F5CB8AF5F0020920C00107D
+:10640000240B0014318400FF148B00AC000000004A
+:1064100096090002312D000115A001520000000074
+:106420008E020004AE8200083C0E08008DCE5CC0D7
+:1064300011C00148000000008F6900743C0E80000C
+:1064400024040001012E6825AF6D0074A3600005CF
+:10645000AF64000C3C0C08008D8C5CC08F88001C65
+:10646000A7640010000C59C2A7640012A7640014AE
+:10647000A7640016A76B00088D030008240400021F
+:10648000AF63002C8D0A000CAF6A0030910700103A
+:10649000A36700348F82001C90450011A36500356E
+:1064A0008F86001C90D00012A37000368F9F001CB6
+:1064B00093F90013A37900378F90001C96180014ED
+:1064C000A778003896140016A774003A8E0F0018AB
+:1064D000AF6F00245620FDA6AF8400283C050800BD
+:1064E00024A55CB80E00025E000020218F90001CE5
+:1064F0000A0004B6000020213C05080024A55CB871
+:106500000E000287240400828F90001C00003021BE
+:106510000A000373AF8600283C0408008C845CB832
+:106520000E001577000000008F90001C0A000490F8
+:10653000000018213C05080024A55CB80E00028765
+:106540002404008B8F90001C0011302B0A00037371
+:10655000AF8600283C1908008F395CB83C1F080042
+:106560008FFF005024CCFFFE033F782101F87024F8
+:10657000AF4E00283C0408008C845CB83C0908003D
+:106580008D2900500089682131A8007F011A282137
+:1065900000A78021AE0600D8AF9000D0AE0000DC8E
+:1065A0000A0003C2AE0C0108AF6000843C0508007D
+:1065B0008CA55CB83C0808008D080050240CFF80B6
+:1065C0003C02000C00A8A021028C5824AF4B0028EC
+:1065D0008E1F00143283007F007A50210142702107
+:1065E000ADDF00D88E190014AF8E00D0ADD900DC1D
+:1065F0008E180010270FFFFE0A000415ADCF01080A
+:10660000548BFE2F240540000A0004472405100087
+:106610000E000335000000000A0003F88F90001CF4
+:106620008C46442C3C056C6234B079703C01080007
+:10663000AC205CB814D00008240400029788003411
+:10664000978A002C02802821010A382B10E00011C3
+:1066500024040092240400020E000C9D2405014035
+:106660003C010800AC225CB8AF4200203C030800AB
+:106670008C635CB810600005240400830E00086879
+:106680000000000010400009240400833C050800BD
+:1066900024A55CB80E00025E000000008F90001C74
+:1066A0000011202B0A000373AF8400280E00086C31
+:1066B000000000000A0005968F90001C0E00087074
+:1066C000000000003C05080024A55CB80A00063C58
+:1066D0002404008B8E0400080E00023B0000000022
+:1066E0000A00052DAE820008240400040E000C9D53
+:1066F000240500301440003F004048218F90001CCA
+:106700000A00057D240500830E00034002002821B5
+:106710000A0004E2000000003C05080024A55CB863
+:106720000E000230240400878F90001C0A000549E7
+:106730000011102B0E0002500280202193700023C4
+:1067400002802021360D00100E000259A36D002397
+:106750008F90001C0A000552000018219205000CC1
+:1067600030BF000113E00003000000009602000E9D
+:10677000A482002C920A000C314800021100FEF2A3
+:1067800000002821960B00128E030014A48B001A1F
+:106790000A000569AC83001C8F8300388F870030A6
+:1067A0001067FE84000020213C09080025295C3C7C
+:1067B000000320C0008930218CD400001285005EC7
+:1067C000247800013303000F5467FFFA000320C050
+:1067D0000A000504000020213C05080024A55CB83F
+:1067E0000E000287240400828F90001C0A000549D5
+:1067F000000010213C0B0008034B20212403005013
+:10680000240A0001AF420020A0830000A08A0001FA
+:106810008F88001C91070004A08700188F82001C3D
+:1068200090450005A08500198F86001C90DF0006AA
+:10683000A09F001A8F99001C93380007A098001B96
+:106840008F94001C928F0008A08F001C8F90001C5A
+:10685000920E0009A08E001D8F8D001C91AC000AC5
+:10686000A08C001E8F8B001C3C0C0800258C5C3C0F
+:106870009163000B3C0B0800256B5C38A083001F64
+:106880008F8A001C9148000CA08800208F87001C74
+:1068900090E5000DA08500218F82001C240546464E
+:1068A0009046000EA08600228F9F001C93F9000FD7
+:1068B000A09900238F98001C93140010A09400242A
+:1068C0008F8F001C91F00011A09000258F90001C6C
+:1068D0008F8E00308F990038960D0014000E18C06E
+:1068E00025C80001A48D0028960A0016006C3021EE
+:1068F000006BF821A48A002A960700183108000FBF
+:10690000A487002CA485002E8E02001CACC90000B8
+:10691000AF88003011190003AFE200000A00057DC6
+:1069200000002821250C00013184000F00002821DF
+:106930000A00057DAF8400383C07080024E75C3876
+:106940000087802100002021ACC000000A0005045F
+:10695000AE0000003C05080024A55CB80A00063C17
+:10696000240400878E0400040E00023B0000000097
+:106970000A0005A1AE8200083084FFFF30C600FF88
+:106980008F4201B80440FFFE000644000104302598
+:106990003C07200000C720253C031000AF400180C9
+:1069A000AF450184AF44018803E00008AF4301B85C
+:1069B00027BDFFE8AFB00010AFBF00143C07600078
+:1069C000240600021080000600A080210010102B79
+:1069D0008FBF00148FB0001003E0000827BD00181F
+:1069E0003C09600EAD2000348CE5201C8F82001C19
+:1069F0002408FFFC00A81824ACE3201C0E0006F5B8
+:106A00008C45000C0010102B8FBF00148FB00010AD
+:106A100003E0000827BD00183C02600E3447010067
+:106A200024090018274A04000000000000000000AC
+:106A3000000000003C06005034C30200AF440038A0
+:106A4000AF45003CAF430030014018218F4B0000A0
+:106A5000316800201100FFFD2406007F2408FFFF9D
+:106A60008C6C000024C6FFFF24630004ACEC000023
+:106A700014C8FFFB24E70004000000000000000031
+:106A8000000000003C0F0020AF4F0030000000006D
+:106A900024AD020001A5702B2529FFFF008E2021C7
+:106AA0001520FFE101A0282103E0000800000000FC
+:106AB00027BDFFE0AFB10014AFBF0018AFB00010AA
+:106AC0003C05600E8CA20034008088211440000632
+:106AD0003C0460008C87201C2408FFFC00E8302464
+:106AE00034C30001AC83201C8F8B001C24090001DF
+:106AF000ACA90034956900028D6500148D70000CFE
+:106B00002D2400818D6700048D6600081080000729
+:106B10008D6A00102D2C00041580000E30CE000769
+:106B2000312D000311A0000B000000002404008B95
+:106B3000020028210E0006F5240600030011102B88
+:106B40008FBF00188FB100148FB0001003E0000851
+:106B500027BD002015C0FFF62404008B3C03002055
+:106B6000AF4300300000000024020001AF82001497
+:106B70000000000000000000000000003C1F015069
+:106B8000013FC825253800033C0F600EAF47003891
+:106B900000181882AF46003C35E8003CAF59003081
+:106BA000274704008F4400003086002010C0FFFDFE
+:106BB00000000000106000082466FFFF2403FFFFB0
+:106BC0008CEB000024C6FFFF24E70004AD0B00009F
+:106BD00014C3FFFB250800043C08600EAD09003813
+:106BE0000000000000000000000000003C07002042
+:106BF000AF470030000000000E00071D01402021BB
+:106C000002002821000020210E0006F524060003C2
+:106C10000011102B8FBF00188FB100148FB000101F
+:106C200003E0000827BD002027BDFFD8AFB2001841
+:106C30003092FFFFAFB10014AFBF0020AFB3001C14
+:106C4000AFB000101240002C000088210A0007B5E8
+:106C50002413000150B300408CE5000C0000000D2F
+:106C6000263900013331FFFF24F800200232382B8F
+:106C700010E00021AF98001C8F8200141440001E09
+:106C80008F87001C3C0670003C0320008CE4000051
+:106C90000086282414A300188F85003C00044402B9
+:106CA0003C0980000089802414A0FFEA310600FF1F
+:106CB000240A000210CA002E28CB0003116000161F
+:106CC000240C000314D3FFE7263900010200282119
+:106CD0000E000703240400018F87001CAF82003CD4
+:106CE000263900013331FFFF24F800200232382B0F
+:106CF00014E0FFE1AF98001C022010218FBF00209C
+:106D00008FB3001C8FB200188FB100148FB0001029
+:106D100003E0000827BD002810CC001A240D000451
+:106D200014CDFFD026390001308EFFFF000E19C0B0
+:106D30008F4401B80480FFFE3C0F10003C1020047B
+:106D4000AF430180AF400184AF500188AF4F01B81D
+:106D50000A0007B0263900010E0006F5240400845D
+:106D60001600FFBF8F87001C0A0007AFAF80003CF2
+:106D7000020028210E000703000020210A0007CE90
+:106D80008F87001C0E000743020020218F87001C04
+:106D90000A0007CFAF82003C3082FFFF144000039F
+:106DA000000018210004240224030010308500FF95
+:106DB00014A000053087000F24660008000422029A
+:106DC00030C300FF3087000F14E000053089000356
+:106DD0002468000400042102310300FF308900030D
+:106DE00015200005388B0001246A0002000420826F
+:106DF000314300FF388B0001316400011080000234
+:106E0000246C0001318300FF03E0000800601021C2
+:106E1000308BFFFF000B394230E600FF3C090800D1
+:106E200025295BB800064080010960218D8700009C
+:106E30003164001F240A0001008A180430A500FFF5
+:106E400000E3202514A000020003102700E2202404
+:106E5000240F000100CF700401096821000E2827CB
+:106E600014800005ADA400008F86000C00A610243D
+:106E700003E00008AF82000C8F88000C01C81025C9
+:106E800003E00008AF82000C3C06001F3C036000DA
+:106E90003084FFFF34C5FF8024020020AC6020084E
+:106EA000AC60200CAC602010AC652014AC642018E1
+:106EB000AC622000000000000000000003E00008B9
+:106EC0000000000027BDFFE82402FFFFAFBF001055
+:106ED000AF82000C000020213C06080024C65BB8ED
+:106EE0002405FFFF24890001000440803124FFFFB6
+:106EF000010618212C87002014E0FFFAAC65000081
+:106F00000E00083900002021240200013C0460002A
+:106F100024050020AC822018AC8520000000000071
+:106F20000000000000000000244A00013142FFFF81
+:106F30002C46040014C0FFF78FBF001003E00008C8
+:106F400027BD00188F8300082C62040003E00008AE
+:106F5000384200018F8300082462000103E000082A
+:106F6000AF8200088F8300082462FFFF03E000085F
+:106F7000AF82000827BDFFE0AFB10014AFBF00181B
+:106F8000AFB000108F6B00303C066000008088219D
+:106F9000ACCB20088F6A002C3C0280002403000840
+:106FA000ACCA200C9769003A9768003800092C0099
+:106FB0003107FFFF00A72025ACC42010ACC220146D
+:106FC000ACC3200000000000000000000000000032
+:106FD0003C0360008C6D200031AC00081580FFF987
+:106FE000000000008C6E201405C00020000000008E
+:106FF0000E0007FD8F84000C000240803C09080051
+:1070000025295BB8010938218CE400000E0007FD3A
+:1070100000028140020220213090FFFF0200202167
+:107020000E00081B000028213C0C8000022C582573
+:107030003210FFFF3C116000240A0020AE2B201408
+:10704000AE302018AE2A2000000000000000000032
+:1070500000000000020010218FBF00188FB1001443
+:107060008FB0001003E0000827BD00208C662014BC
+:107070003C02001F3443FF803C1FFFE800C3C024D4
+:1070800037F9080003198021001079C23C0C8000F8
+:10709000022C582531F0FFFF3C116000240A00202B
+:1070A000AE2B2014AE302018AE2A200000000000C5
+:1070B0000000000000000000020010218FBF001837
+:1070C0008FB100148FB0001003E0000827BD00202E
+:1070D00027BDFFE8AFB000103402FFFF3090FFFF84
+:1070E000AFBF001412020006020020210E00083972
+:1070F00000000000020020210E00081B24050001F2
+:107100008F8400088FBF00148FB000102483FFFF0E
+:1071100027BD001803E00008AF830008000439C24F
+:1071200030E6003F00043B420007184024021000F4
+:107130002CC4002024C8FFE0AF42002C24630001CF
+:107140001480000330A900FF00071840310600FF3B
+:107150000003608024080001019A58213C0A000EB7
+:1071600000C82804016A38211120000500053027D5
+:107170008CE900000125302503E00008ACE60000A2
+:107180008CEE000001C6682403E00008ACED0000AE
+:1071900027BDFFE8AFBF0014AFB000103C04600093
+:1071A0008C8508083403F00030A2F000504300063C
+:1071B000240200018C8708083404E00030E6F00067
+:1071C00010C4001E24020002AF8200403C10600088
+:1071D0003C0A0200AE0A0814240910003C08000E04
+:1071E0008E03440003482021AF49002C24050120D0
+:1071F0000E000CE3000030218F830040106000047B
+:107200003C021691240B0001106B000E3C023D6CF9
+:10721000344F0090AE0F44088FBF00148FB00010A1
+:107220003C0C6000240E10003C0D020027BD00182D
+:10723000AD8E442003E00008AD8D08100A00090A55
+:10724000AF8000403C0218DA344F0090AE0F440883
+:107250008FBF00148FB000103C0C6000240E100093
+:107260003C0D020027BD0018AD8E442003E000084D
+:10727000AD8D08100A0008DE240500010A0008DEB2
+:10728000000028213C08080025085FC42404FFFFF3
+:10729000010018212402001E2442FFFFAC640000FC
+:1072A0000441FFFD246300043C07080024E760401C
+:1072B0008CE5FFFC2404001C24060001308A001F1A
+:1072C0000146480424840001000910272C83002073
+:1072D0001460FFFA00A22824ACE5FFFC3C056666BA
+:1072E00034A4616E3C06080024C66100AF840058D7
+:1072F000AF88009C2404FFFF00C018212402001F57
+:107300002442FFFFAC6400000441FFFD246300043D
+:107310003C0766663C05080024A560C0AF860048AF
+:1073200034E6616EAF8600982404FFFF00A01821A8
+:107330002402000F2442FFFFAC6400000441FFFD63
+:10734000246300043C0B66663C06080024C66040CB
+:107350003568616EAF8500A4AF8800702404FFFF1C
+:1073600000C018212402001F2442FFFFAC6400006B
+:107370000441FFFD246300043C0D66663C0A0800DE
+:10738000254A618035AC616EAF860090AF8C005CA1
+:107390002404FFFF01401821240200032442FFFFC0
+:1073A000AC6400000441FFFD246300043C090800B4
+:1073B000252961908D27FFFC240400062405000187
+:1073C0003099001F0325C004248400010018782789
+:1073D0002C8E002015C0FFFA00EF3824AD27FFFCEB
+:1073E0003C09666624030400240403DC240502002F
+:1073F000240600663522616E3C08080025085CC43E
+:10740000AF820074AF830044AF83006CAF83005041
+:10741000AF830084AF8A008CAF840064AF85004CDA
+:10742000AF860054AF840078AF850060AF860080DF
+:1074300001001821240200022442FFFFAC6000007A
+:107440000441FFFD24630004240400032403000C12
+:107450003C0A0800254A5CD0AF8A00680A0009B1DE
+:107460002405FFFF000418802484000100685821CF
+:107470002C8700C014E0FFFBAD6500003C0E666683
+:1074800035CD616E240C17A024081800AF8D00883C
+:10749000AF8C009403E00008AF88007C2484007F58
+:1074A000000421C2000040210000302100003821EA
+:1074B000000028210A0009C8AF8400A0106000065F
+:1074C00024E7000100C4302124A500012CC20BF5E3
+:1074D0001440FFFA2CA300663C09080025296180AE
+:1074E00001201821240200032442FFFFAC600000A9
+:1074F0000441FFFD2463000410E0001A24E3FFFFB1
+:107500000003294210A0000A000020212406FFFFEA
+:107510003C03080024636180248400010085502B13
+:10752000AC660000250800011540FFFB2463000441
+:1075300030E2001F1040000800086880240C0001A1
+:10754000004C3804000858800169282124E6FFFF18
+:1075500003E00008ACA6000001A940212409FFFFB8
+:10756000AD09000003E0000800000000AF4400285F
+:107570003C04000C03442021000528820A000CE38F
+:1075800000003021000421803C036000AC6410083E
+:107590000000000000052980AC65100C0000000010
+:1075A00003E000088C62100C27BDFFE80080282152
+:1075B00024040038AFBF00140E0009F8AFB000106B
+:1075C00024040E00AF4400283C10000C035020217E
+:1075D000240500100E000CE30000302103501021A0
+:1075E000AC400000AC400004240400388FBF0014FD
+:1075F0008FB0001024053FFF27BD00180A0009F8CE
+:107600008C430000000421803C036000AC6410083F
+:10761000000000008C62100C03E0000800021182E0
+:1076200027BDFFC8AFB400208F940068AFBE003004
+:10763000AFB7002CAFB600280000B8210080B02101
+:10764000241E00C0AFBF0034AFB50024AFB3001C90
+:10765000AFB20018AFB10014AFB000100A000A3585
+:10766000AFA5003C504000018F94006827DEFFFF6B
+:1076700013C00028269400048E9200003C030800EA
+:1076800024635FC01240FFF70283102B3C04080004
+:1076900024845CC4028410230002A8C00000982146
+:1076A0000A000A442411000100118840122000261B
+:1076B0000000000002B38021025128240200202192
+:1076C00010A0FFF9267300010E000A01000000005F
+:1076D0000016684032EC000101AC20210E0009F8D0
+:1076E000020028218F89009426F700018FA6003C14
+:1076F0003AEB0001316A00012528FFFF001138270D
+:1077000002CAB021AF88009416E6FFE70247902432
+:10771000AE92000002E010218FBF00348FBE003017
+:107720008FB7002C8FB600288FB500248FB40020AF
+:107730008FB3001C8FB200188FB100148FB00010EF
+:1077400003E0000827BD00383C0E080025CE5FC0CE
+:10775000028E102B0A000A30AE92000027BDFFD81F
+:10776000AFB10014AFB00010AFBF0020AFB3001C2A
+:10777000AFB2001800A0882110A0001F00048040B4
+:107780003C13080026735CC40A000A7D2412000121
+:1077900012200019261000010E000A1802002021F4
+:1077A000000231422444FFA0000618803045001F2B
+:1077B0002C8217A1007318212631FFFF1040FFF41F
+:1077C00000B230048C6900000200202124053FFF34
+:1077D000012640241500FFEE012638250E0009F889
+:1077E000AC6700008F8A0094261000012547000135
+:1077F0001620FFE9AF8700948FBF00208FB3001CD5
+:107800008FB200188FB100148FB0001003E0000891
+:1078100027BD00288F85009C008058210000402152
+:1078200000004821240A001F3C0C0800258C603C05
+:107830003C0D080025AD5FC48CA6000050C00014AC
+:107840000000402100AD1023000238C024030001D5
+:107850000A000AB6000020211500000300E41021F0
+:10786000244820240000482125290001512B001321
+:107870002506DFDC106000062484000100C37024AC
+:1078800015C0FFF5000318400A000AB400004021AB
+:1078900010AC002624A3000400602821254AFFFF25
+:1078A0001540FFE5AF85009C512B00042506DFDC69
+:1078B0000000402103E000080100102100066142A1
+:1078C00030C5001F000C50803C07080024E75FC44F
+:1078D00024040001014730211120000F00A42004DE
+:1078E0003C05080024A56040148000052529FFFF01
+:1078F00024C6000410C5001100000000240400018B
+:107900008CCF00000004C0270004204001F8682448
+:107910001520FFF5ACCD00008F99007801001021F3
+:10792000032B482303E00008AF8900783C050800DA
+:1079300024A55FC40A000ABE000040213C060800DE
+:1079400024C65FC40A000AD724040001308800FF5F
+:10795000240200021102000A240300031103005C48
+:107960008F8900A4240400041104005F240500058D
+:10797000110500670000182103E0000800601021D5
+:107980008F8900483C0C0800258C61003C040800ED
+:1079900024846180240300201060000F000058211F
+:1079A000240D0002240E00033C0F080025EF6100A7
+:1079B0008D27000014E0000B30F9FFFF252900049B
+:1079C0000124C02B53000001018048212463FFFFE4
+:1079D0005460FFF88D2700000160182103E00008C3
+:1079E00000601021132000323C0500FF30E200FF50
+:1079F00000403021104000420000502124050001C9
+:107A0000000020210005C84000A6C0241700000384
+:107A1000332500FF14A0FFFB24840001012CC023A8
+:107A2000001828C000AA6021008C50213144001F9A
+:107A3000240C0001008C18040003102700E23024FD
+:107A4000110D0041AD260000110E004C000A184037
+:107A5000110D00368F87006C510E00568F8C006020
+:107A6000240D0004110D005A8F8E0084240E000591
+:107A7000150EFFDA01601821240B143011400006A6
+:107A8000000018218F8400A024630001006A402BAD
+:107A90001500FFFD016458218F8A0080AF89008C9A
+:107AA000016018212549FFFF0A000B0EAF890080F5
+:107AB00000E52024000736021080FFD0240A0018B9
+:107AC00000075402314600FF0A000B16240A00107A
+:107AD0003C0C0800258C60C03C0408002484610034
+:107AE0000A000AFD240300103C0C0800258C6040AD
+:107AF0003C040800248460C00A000AFC8F890090BE
+:107B000000071A02306600FF0A000B16240A00085C
+:107B10008F89008C3C0C0800258C61803C04080097
+:107B2000248461900A000AFD24030004000A4080B6
+:107B3000250B003024E6FFFF01601821AF890048C3
+:107B40000A000B0EAF86006C000AC982001978800B
+:107B50003C07080024E760C001E72021000A184222
+:107B60008C8F00003079001F032C38040007C027D9
+:107B700001F860240A000B2BAC8C0000000331429A
+:107B80000006288000AF28213062001F8CB800005A
+:107B900024630001004CC804000321420019382767
+:107BA0000004108003073024004F20210A000B6FCF
+:107BB000ACA60000000A68C025AB0032258AFFFF92
+:107BC00001601821AF8900A40A000B0EAF8A006083
+:107BD000254B1030AF8900900160182125C9FFFFA7
+:107BE0000A000B0EAF890084308600072CC2000605
+:107BF0001040001400000000000640803C03080014
+:107C0000246359D4010338218CE40000008000086B
+:107C1000000000002409000310A9000E000000006D
+:107C2000240A000510AA000B00000000240B00012C
+:107C300010AB0008000000008F8C00A010AC000505
+:107C40000000000003E00008000010210A000A9C68
+:107C500000A020210A000AEA00C0202127BDFFE879
+:107C6000308400FF240300021083000BAFBF00101C
+:107C7000240600031086003A2408000410880068D7
+:107C8000240E0005108E007F2CAF14308FBF001023
+:107C900003E0000827BD00182CA200301440FFFCB0
+:107CA0008FBF001024A5FFD0000531C200066880F8
+:107CB0003C07080024E7610001A730218CC90000BF
+:107CC0000005288230AC001F240B0001018B5004FA
+:107CD0008F840048012A4025ACC800008C83000036
+:107CE00050600001AF8600488F98006C30AE0001F4
+:107CF00024A6FFFF270F000115C00002AF8F006C04
+:107D000024A60001000641420008208000871821B7
+:107D10008C79000030C2001F240600010046F804E0
+:107D2000033F382410E0FFDA8FBF00100005C18246
+:107D3000001870803C0F080025EF60C001CF48217B
+:107D40008D2B00000005684231A5001F00A66004CD
+:107D5000016C502527BD001803E00008AD2A000083
+:107D60002CA7003014E0FFCA8FBF001030B9000705
+:107D70001723FFC724A8FFCE00086A02000D608009
+:107D80003C0B0800256B60C0018B30218CC40000C7
+:107D9000000828C230AA001F240800010148480436
+:107DA0008F8200A400891825ACC300008C5F0000FE
+:107DB00053E00001AF8600A400057040000E794238
+:107DC000000F28803C0408002484610000A41821CE
+:107DD0008C6B000025DF000131CD001F001F5142D8
+:107DE00001A86004016C4825000A1080AC690000FD
+:107DF000004428218CA600008F98006033F9001FF2
+:107E00008FBF00100328380400C77825270E000113
+:107E100027BD0018ACAF000003E00008AF8E006083
+:107E200024A5EFD02CB804001300FF998FBF0010D9
+:107E300000053142000658803C0A0800254A60408F
+:107E4000016A30218CC4000030A3001F2409000106
+:107E5000006910048F9900900082F825ACDF0000C3
+:107E60008F27000050E00001AF8600908F8D0084C6
+:107E70008FBF001027BD001825AC000103E00008EB
+:107E8000AF8C008415E0FF828FBF00108F8600A0AA
+:107E9000000610400046F821001F210003E4C8211D
+:107EA0000019384024F8143000B8402B1100FF7836
+:107EB0008FBF001024A4EBD00E00020D00C02821BB
+:107EC00000027942000F70803C0D080025AD6180F2
+:107ED00001CD20218C8B0000304C001F24060001B6
+:107EE000018618048F89008C01635025AC8A00003C
+:107EF0008D25000050A00001AF84008C8F98008079
+:107F00008FBF001027BD00182708000103E00008FC
+:107F1000AF88008030A500072403000310A30010E1
+:107F200028A20004144000082407000224030004CF
+:107F300010A300152408000510A8000F8F8500A0CD
+:107F400003E000080000000014A7FFFD00802821C6
+:107F500014C3FFFB240400020A000BAE0000000063
+:107F6000240900050080282110C9FFFB2404000318
+:107F700003E000080000000014C5FFF10080282184
+:107F80000A000BAE24040005240A00010080282109
+:107F900010CAFFF12404000403E000080000000000
+:107FA00027BDFFE0AFB00010000581C22603FFD05F
+:107FB00024C5003F2C6223D024C6007FAFB2001836
+:107FC000AFB10014AFBF001C309100FF000691C29A
+:107FD0000005298202002021104000082403FFFF31
+:107FE0000E000A6E0000000002002021022028215D
+:107FF0000E000C5C02403021000018218FBF001CD5
+:108000008FB200188FB100148FB0001000601021E3
+:1080100003E0000827BD002027BDFFD824A2007F71
+:10802000AFB3001CAFB20018000299C2309200FF3B
+:1080300024A3003F0240202102602821AFB1001498
+:10804000AFB00010AFBF00200E000B91000389827B
+:1080500000408021004020210220282114400009F6
+:10806000000018218FBF00208FB3001C8FB20018B2
+:108070008FB100148FB000100060102103E00008E1
+:1080800027BD00280E000A1F000000000040282124
+:10809000020020211051FFF3001019C00E000A6EDB
+:1080A0000000000002002021024028210E000C5C8C
+:1080B000026030218FBF00208FB3001C8FB20018E8
+:1080C0008FB100148FB00010000018210060102143
+:1080D00003E0000827BD00283084FFFF30A5FFFF24
+:1080E00010800007000018213082000110400002BB
+:1080F00000042042006518211480FFFB0005284081
+:1081000003E000080060102110C00007000000001C
+:108110008CA2000024C6FFFF24A50004AC8200004E
+:1081200014C0FFFB2484000403E0000800000000EA
+:1081300010A0000824A3FFFFAC8600000000000090
+:10814000000000002402FFFF2463FFFF1462FFFA17
+:108150002484000403E000080000000030A5FFFFB5
+:108160008F4201B80440FFFE3C07601500A7302590
+:108170003C031000AF440180AF400184AF4601884A
+:1081800003E00008AF4301B88F8500D02C86400083
+:10819000008018218CA700840087102B1440001049
+:1081A000000000008CA800842D06400050C0000F85
+:1081B000240340008CAA0084008A482B512000012F
+:1081C0008CA3008400035A42000B20803C05080069
+:1081D00024A55A400085182103E000088C620000A5
+:1081E00014C0FFF4000000002403400000035A42C2
+:1081F000000B20803C05080024A55A40008518216A
+:1082000003E000088C6200008F8300D0906600D0ED
+:1082100024C50001A06500D08F8500D0906400D0F7
+:1082200090A200D21044001700000000936C007868
+:108230008F8B00BC318A00FFA16A000C2549000128
+:10824000938700C4312200FF3048007F1107000BE4
+:1082500000026827A36200788F4E017805C0FFFEF8
+:108260008F9900B0241800023C0F1000AF59014054
+:10827000A358014403E00008AF4F01780A000D2C19
+:1082800031A20080A0A000D00A000D220000000052
+:1082900027BDFFD8AFB200188F9200B8AFBF002043
+:1082A000AFB3001CAFB00010AFB100148F9300B497
+:1082B0008E5900283C1000803C0EFFEFAE79000084
+:1082C0008E580024A260000A35CDFFFFAE7800046E
+:1082D0009251002C3C0BFF9F356AFFFFA271000CEE
+:1082E0008E6F000C3C080040A271000B01F060256D
+:1082F000018D4824012A382400E83025AE66000CA0
+:108300008E450004AE6000183C0400FFAE6500140A
+:108310008E43002C3482FFFFA66000080062F82420
+:10832000AE7F00108E5900088F9000B0964E00125C
+:10833000AE7900208E51000C31D83FFF00187980B3
+:10834000AE7100248E4D001401F0602131CB00018C
+:10835000AE6D00288E4A0018000C41C2000B4B8005
+:10836000AE6A002C8E46001C01093821A667001C4D
+:10837000AE660030964500028E440020A665001EC1
+:10838000AE64003492430033306200045440000570
+:10839000924600008F8300D08C7F007CAE7F00303F
+:1083A000924600008F8500BCA0A6000092440033D6
+:1083B0003082000250400007924E00018F8700BCBF
+:1083C000240AFF8090E90000012A4025A0E800006F
+:1083D000924E00018F8D00BC2409FFBF2404FFDFF3
+:1083E000A1AE00018F8A00BC914C000D318B007F43
+:1083F000A14B000D8F8600BC90C8000D01093824E8
+:10840000A0C7000D8F9100BC8E6500149223000D53
+:108410002CA200010002F9400064C824033FC025DB
+:10842000A238000D8F8800BC965000128F8700D0B4
+:10843000A51000028E45000490ED00BC30AF000393
+:10844000000F702331CC000300AC102131AB0002CF
+:1084500015600002244400342444003090F100BC34
+:1084600000B18024320F000415E0000224830004D0
+:10847000008018218F8900AC240A0002AD0300049B
+:10848000A12A00009248003F8F8700ACA0E80001BD
+:108490008F9100AC9246003F8E440004A626000255
+:1084A0009765003C0E000CF930B0FFFF000213800E
+:1084B000005020253C0342000083F825AE3F000415
+:1084C0008F8500AC8E590038ACB900188E58003436
+:1084D000ACB8001CACA0000CACA00010A4A0001410
+:1084E000A4A00016A4A00020A4A00022ACA00024F8
+:1084F0008E62001450400001240200018FBF002052
+:108500008FB3001C8FB200188FB100148FB0001011
+:10851000ACA200080A000D1927BD00288F8600D0E4
+:1085200027BDFFD0AFBF002CAFB60028AFB50024E9
+:10853000AFB40020AFB3001CAFB20018AFB100144D
+:10854000AFB0001094C300E094C200E210430041B9
+:108550002405FFFF3C16000E90C400D090C800D147
+:10856000309200FF310400FF0244382B10E0004439
+:1085700026490001108900378F9800B03C0508009B
+:108580008CA5005C2414FF8000B86021019468244D
+:10859000AF4D002C94CA00E2318B007F017A482154
+:1085A00031447FFF01364021000410400048A821DB
+:1085B00096A700003C1F08008FFF005830F53FFFD2
+:1085C0000015198003E3C821031988213233007F85
+:1085D000027A782102348024AF50002C01F69821D1
+:1085E000926E000D31C5000410A00048000000008C
+:1085F00094C300E294C300E294D800E22404800013
+:10860000307F7FFF27F9000133317FFF030480248F
+:1086100002117825A4CF00E294CE00E23C120800BB
+:108620008E52006031D47FFF129200DF0000000004
+:108630008E720018000028212646FFFFAE66002C2F
+:108640008F8600D094C800E094C900E21528FFC2CC
+:10865000000000008FBF002C8FB600288FB50024CB
+:108660008FB400208FB3001C8FB200188FB100149C
+:108670008FB0001000A0102103E0000827BD0030DB
+:1086800090CD00D2264A000131AC00FF008C582169
+:10869000116AFFF08F9800B03C0508008CA5005CC3
+:1086A0002414FF8000B8602101946824AF4D002C91
+:1086B00094CA00E2318B007F017A482131447FFF68
+:1086C00001364021000410400048A82196A7000070
+:1086D0003C1F08008FFF005830F53FFF0015198040
+:1086E00003E3C821031988213233007F027A7821FD
+:1086F00002348024AF50002C01F69821926E000DB8
+:1087000031C5000414A0FFBA000000008E660010FE
+:108710000012C0C08E6E00300012914002587821C5
+:10872000036F582100CE6823256C008824020002C4
+:10873000AE6D0010AF8C00ACA1620088976A003C5F
+:108740008E6400308F9100AC0E000CF93150FFFFA9
+:1087500000022380009048253C034200012340256D
+:10876000AE2800048E6700048F8C00AC8E7F000062
+:10877000240D0008AD87001CAD9F0018AD80000CD3
+:10878000AD8000109265000A30B900FFA599001471
+:10879000967800083C05000CA59800169271000A16
+:1087A000322F00FFA58F00209670000824110005CD
+:1087B000A5900022AD800024926E000B2410C00012
+:1087C00031C600FFA5860002A18D00018E6B00302E
+:1087D0008F8200AC8F8800B0AC4B00083C0A0800C8
+:1087E0008D4A00540148202100944824AF490028B4
+:1087F0003C0308008C6300540068382130FF007F80
+:1088000003FAC8210325C02102587821AF8F00BC8C
+:10881000AF9800C0A1F100008F8B00BC2403FFBF04
+:108820002405FFDF956E000201D0A024029590255B
+:10883000A57200029166000230CD003F35AC0040C9
+:10884000A16C00028F8800BC8F8200D03C0C7FFF9F
+:10885000AD0000048C4A007C358BFFFF3C02800099
+:10886000AD0A00089104000D3089007FA109000DB8
+:108870008F9F00BC93F5000D02A33824A3E7000DE1
+:108880008F9100BC9239000D0325C024A238000D41
+:108890008E6F00348F8D00BCADAF00108E6E002C3B
+:1088A0008E70003001D0A023ADB4001491B2001836
+:1088B0003246007FA1A600188F8700BC8E6A003068
+:1088C0008CE40018014B4824008240240109A825AB
+:1088D000ACF500189263000AA0E3001C967F000824
+:1088E0008F8500BC8F9900D0A4BF001E8E70003011
+:1088F0008E6400300E00020D8F2500848F8500D01D
+:10890000000289400002C10090AE00BC023878210C
+:108910000040302131D4000212800003020F802178
+:108920000002A8800215802190B200BC32540004DD
+:10893000128000020006C880021980218E6F00306C
+:108940008F8B00BC2406800031EE0003000E6823EC
+:1089500031AC0003020C1021AD62000494A400E2CB
+:1089600094AA00E294A300E231507FFF26040001A4
+:1089700030897FFF0066402401098825A4B100E208
+:1089800094A700E23C1308008E73006030FF7FFF65
+:1089900013F30012000000000E000D19000000008B
+:1089A0000A000E270000282194CD00E201A46024D3
+:1089B000A4CC00E290CB00E290C200E2316A00FF5A
+:1089C000000A49C200092027000441C03055007F39
+:1089D00002A838250A000E23A0C700E294B100E2E5
+:1089E00002263824A4A700E290BF00E290B400E27F
+:1089F00033F300FF0013C9C2001990273298007F9B
+:108A00000012A9C0031530250E000D19A0A600E222
+:108A10000A000E27000028213084FFFF30A5FFFF49
+:108A2000AF440018AF45001C03E000088F4200145B
+:108A300027BDFFB0AFB000288F9000D0AFB4003892
+:108A4000AFBF004CAFBE0048AFB70044AFB6004068
+:108A5000AFB5003CAFB30034AFB20030AFB1002CC3
+:108A6000A7A00014920600D1920500D03094FFFF19
+:108A700030C400FF30A300FF0064102BA7A0001E2D
+:108A800010400071AFA00010920900D00014982B84
+:108A9000312800FF0088382324F2FFFF0012882BC2
+:108AA0000233782451E000758FB20010961800123E
+:108AB000961900100014F4000319B8230017B4002D
+:108AC000001614030282A82A16A00002001E240326
+:108AD000004020210244F82B13E0000200801821FE
+:108AE000024018210003340000061C033065FFFF1C
+:108AF0002CA20009144000020060982124130008F1
+:108B00008E090008001359808E08000C3164FFFFA5
+:108B10003C0A0010008A3825274A0400AF49003873
+:108B2000AF8A00B8AF48003CAF47003000000000FB
+:108B30000000000000000000000000000000000035
+:108B40000000000000000000000000008F4D000049
+:108B500031AC00201180FFFD0013702A01D11024D8
+:108B60000000A821104001C0000000008F9800B054
+:108B70003C0B08008D6B00542411FF80921E00D026
+:108B80000178202100911024921900D0AF420028D2
+:108B90008D4500103C0608008CC600583C170800A4
+:108BA0008EF7005430A73FFF0007198000C3402113
+:108BB000030820210091F824920B00D0AF5F002C15
+:108BC0009148000033D600FF332F00FF02F87021D8
+:108BD00000166140000F68C031C9007F018D382147
+:108BE000013A2821316300FF3086007F3C02000CEF
+:108BF00000A2B021000389400367C82100DAF821F0
+:108C00003108003F3C1E000E0236B821273800888C
+:108C100003FE88212D0F0008AF9800ACAF9700BC71
+:108C2000AF9600C011E0018FAF9100B400086880DA
+:108C30003C0E080025CE59EC01AE60218D89000064
+:108C40000120000800000000920E00D2920D00D01A
+:108C50000014982B31CA00FF31AC00FF008C582360
+:108C6000014B20212492FFFF0012882B023378242D
+:108C700015E0FF8E000000008FB200108FBF004C87
+:108C80008FBE00483A4200018FB700448FB60040C3
+:108C90008FB5003C8FB400388FB300348FB20030F2
+:108CA0008FB1002C8FB0002803E0000827BD0050D2
+:108CB000915800013317002012E00204241600012D
+:108CC000921F00BC0000B02133F900011320000DF9
+:108CD000241E00018D4800148E0300840103B02B74
+:108CE00016C00002010030218E0600848E0500644B
+:108CF00000C5382B14E0000200C020218E0400645F
+:108D00000080B0218D4200148E0B0064004B302B8C
+:108D100014C00002004020218E0400640096B82395
+:108D200056E00001241E0002025E202B1480014840
+:108D3000000018218D5900388E2F000C3C1800803F
+:108D4000AE3900008D5000343C0EFF9F01F86025C5
+:108D5000AE3000049149003F35CDFFFF018D202446
+:108D60003C0A00203C0BFFEFA229000B008A3825AB
+:108D70003562FFFF00E228243C0600088F8700B818
+:108D800000A6C825AE39000C8CE30014AE200018F4
+:108D90003C08FFFBAE2300148CF80018351FFFFFC2
+:108DA000033F7024AE38001C8CEF000802D78021EE
+:108DB000AE2F00248CED000CAE30002CAE2E000C3B
+:108DC000AE2D0020AE200028A6200038A620003AB4
+:108DD0008CEC0014019648230137502311400011F8
+:108DE000AE2A001090EE003D8E2C00048E24000070
+:108DF000000E6900018D28210000502100AD302BAC
+:108E0000008A582101661021AE250004AE22000020
+:108E100090E3003DA223000A8F8800B8951F00064A
+:108E2000A63F00088F8B00AC2406000202C0202160
+:108E3000A16600009765003C8F9000AC30A2FFFF58
+:108E40000E000CF9AFA200208FA300200002438087
+:108E50008F8500B80103C8253C1F4200033FC02591
+:108E6000AE1800048F8400AC8CAF0038AC8F0018B3
+:108E70008CB00034AC90001CAC80000CAC800010B6
+:108E8000A4800014A4800016A4800020A4800022E6
+:108E9000AC80002490A7003FA487000212C00210FB
+:108EA000240D000152E0000290A2003D90A2003E7D
+:108EB000244A0001A08A00018F8400ACAC9600080F
+:108EC0008F8300D024070034906F00BC31EE000285
+:108ED00051C00001240700308F8200B88F9900BC78
+:108EE000906800BC905F00002410000432CF0003A3
+:108EF000A33F00008F9800B88F8C00BC020F702336
+:108F0000930D00012405C00031CA0003A18D0001AA
+:108F10008F9000BC8F8900B800F6382196040002BB
+:108F20009526001200EA38210085582430C33FFFFF
+:108F300001631025A6020002921F000231080004FE
+:108F400033F9003F37380040A218000212C0000277
+:108F50008F8500BC00E838218F8600D0ACA70004C4
+:108F6000241FFFBF8CC3007C2ECB0001240FFFDF2A
+:108F7000ACA3000890A8000D000B69403102007FEF
+:108F8000A0A2000D8F9000BC9219000D033FC024D9
+:108F9000A218000D8F8A00BC914E000D01CF6024F5
+:108FA000018D4825A149000D8F8600B88F8B00BC2C
+:108FB0008CC70020AD6700108CC50024AD6500147F
+:108FC0008CC40028AD6400188CC3002C0E000D1951
+:108FD000AD63001C2408000257C8009C8F9000D08D
+:108FE0008F8F00D08F8A00C002E0202191E800D04E
+:108FF00091EB00D091E700D0311000FF316E00FFFF
+:1090000000106940000E28C001A5182130E900FFBA
+:109010000363C8210009314000CAF82127220088D3
+:10902000AF8200ACAF9F00BCA33E00880E000CF9DD
+:109030008F9000AC8FB80020000263803C0F42008C
+:10904000019840258F8C00B8010F5825AE0B000405
+:109050008D8400388F8B00AC00002821000539007A
+:10906000AD6400188D8E00343C0F7FFF35E8FFFFA4
+:10907000AD6E001C9183003E8D69001C8D6600184A
+:109080000003510000036F02012AC02100ED1025EA
+:10909000030AF82B00C2C821033F8021AD78001CD1
+:1090A000AD700018AD60000CAD6000109184003E02
+:1090B000241F00052410C000A5640014958E000430
+:1090C00002E8402402E02021A56E00169185003EB2
+:1090D000A5650020958D0004A56D0022AD600024DB
+:1090E0009187003FA56700029183003E9189003D72
+:1090F0000123502325460001A16600018F8200ACA8
+:109100008F9900BCAC570008A33F00008F8A00BCB9
+:109110008F9800B8954F0002970E00122418FFBFD9
+:10912000020F682431C53FFF01A53825A54700027D
+:10913000914C00022405FFDF3189003F35230040B8
+:10914000A14300028F9900BC8F8600D02409FFFF45
+:10915000AF2000048CCB007C2403FF80AF2B0008E1
+:109160009322000D3C0B8000305F007FA33F000D79
+:109170008F8E00BC91D0000D02187824A1CF000D75
+:109180008F8C00BC918D000D01A53824A187000DA6
+:109190008F8600BCACC90010ACD6001490CA001871
+:1091A0000143B025A0D600188F8F00BC8F9800B85F
+:1091B0008DE20018004BF82403E8C825ADF900182B
+:1091C0009310003EA1F0001C8F8E00B88F8D00BC64
+:1091D0008F8700D095C50004A5A5001E0E00020DC6
+:1091E0008CE500848F8700D00002614000022100DE
+:1091F00090EA00BC01844821004028213156000239
+:1092000012C0000302E930210002B08000D63021F4
+:1092100090EC00BC318400041080000332EA0003AB
+:109220000005C08000D83021240900048F9700BCBD
+:10923000012A1023305F000300DFC821AEF90004CB
+:109240000E000D19A62500388F9000D003C01821FC
+:10925000146000020060B0210000902156C000861A
+:109260008F9700B80012882B9609001002955023A2
+:109270003C14002002A91021A6020010AF540030B7
+:109280003154FFFF0000000096130010961F0012DB
+:1092900013F30011000000008E17000C8E0C000864
+:1092A0000015C98002F94021001927C30119B02B0C
+:1092B0000184782101F65821AE08000CAE0B00089D
+:1092C0000014A82B023580241200FE6B8F9000D072
+:1092D0000A000F4200000000960B00148E050004E7
+:1092E0003163FFFF000370C000AE3821AF47003C80
+:1092F0008E0600048F4D003C00CDF0231BC00036CD
+:10930000000000008E080000250200013C1600103D
+:1093100036CF0008AF420038AF4F003000000000E9
+:10932000000000000000000000000000000000003D
+:109330000000000000000000000000008F4400005A
+:10934000308C00201180FFFD000000008F590400C8
+:109350003C170020AE1900088F550404AE15000C10
+:10936000AF570030000000003C0608008CC60044E7
+:109370002418000110D800D3000000009607001246
+:109380003C0508008CA5004000A76821A60D00122E
+:10939000961E001427C90001A609001496020014A5
+:1093A0003044FFFF5486FFC70014A82B30A5FFFFF1
+:1093B0000E000F1DA60000143C0308008C6300245F
+:1093C000960500120043702300AE3023A60600125B
+:1093D0000A0011480014A82B8E0200000A00115B3D
+:1093E0003C1600109156000124100001001678422E
+:1093F00015F0001C97A8001E8D5F00142411C000FA
+:1094000033FE3FFF0111C8243C1808008F1800608C
+:10941000033EB82532E53FFF00B8502B1140001144
+:10942000A7B7001E3C1008008E1000588F8F00B0A8
+:1094300000057180240CFF80020F682101AE4821D5
+:109440003124007F012C5824009A28213C02000E70
+:10945000AF4B002C00A2302190C7000D34E3000474
+:10946000A0C3000D0E000D3B000000008F9000D047
+:10947000240300018F9700B826B900010019AC0041
+:10948000024390230015AC0326F8004002B3202AC3
+:109490000012882B240C000103005021009110249D
+:1094A000AF9800B80A000F70AFAC001095560012CC
+:1094B0008F8400B032C5FFFF0E000CEEA7B600147B
+:1094C0008F9000D00A0011B4000018218D59003887
+:1094D000A620000824040003AE3900008D57003494
+:1094E000A220000A8F9800B8AE3700043C0F00801D
+:1094F000930C003FA224000C8E28000C3C0BFF9F15
+:10950000A22C000B010F1825356EFFFF3C05FFEF65
+:109510008F9700B8006E682434A7FFFF01A730249E
+:10952000AE26000C8EFE001496FF00128F8200B053
+:10953000AE3E00108EF00014AE200018AE200020C9
+:10954000AE300014AE2000248EE9001833F03FFF47
+:1095500000105180AE2900288EF900080142C02178
+:1095600033EC0001AE3900308EEB000C8F8500AC7F
+:10957000001879C2000C238001E44021240E00026F
+:10958000A628001CA6200036AE2B002CA0AE0000A2
+:109590009767003C8F8A00AC3C03420030EDFFFF30
+:1095A00001A33025AD4600048F9E00B824020001BF
+:1095B0002408C0008FD1003824060034AD510018B3
+:1095C0008FC90034AD49001CAD40000CAD40001007
+:1095D000A5400014A5400016A5400020A54000228B
+:1095E000AD400024A5560002A14200018F9F00ACAF
+:1095F0008F9900B88F9800BCAFF600089337000031
+:10960000A31700008F8C00B88F8F00BC91840001DD
+:10961000A1E400018F8D00BC95AB000201687024AD
+:1096200001D02825A5A5000291A7000230E3003F44
+:10963000A1A300028F8300D08F8400BC907100BC76
+:10964000323E000253C0000124060030AC86000404
+:109650008C6F007C2403FFBFAC8F00089088000D46
+:10966000310B007FA08B000D8F8700BC90EE000DAA
+:1096700001C32824A0E5000D8F9E00BC93CD000DF2
+:1096800035A60020A3C6000D8F8A00B88F9100BCBC
+:109690008D500020AE3000108D490024AE290014FA
+:1096A0008D420028AE2200188D5F002CAE3F001CBA
+:1096B0000E000D19000000008F9000D00A00112E3E
+:1096C00002C01821960A00123C1F08008FFF0024D8
+:1096D00003EA9821A61300120A0011480014A82BCF
+:1096E000A08D00018F8900AC240C0001AD2C000876
+:1096F0000A0010488F8300D027BDFFE03C18080007
+:109700008F180050AFB00010AFBF0018AFB10014F9
+:10971000AF8400B093710074030478212410FF809B
+:1097200031EE007F3225007F01F0582401DA6821F4
+:109730003C0C000AA38500C401AC2821AF4B0024D7
+:1097400094A900109768000690A600620080382156
+:10975000240200300109202330C300F0AF8500D07F
+:10976000106200193090FFFF90AE0062240DFFF0F0
+:10977000240A005001AE6024318B00FF116A002FD3
+:109780000000000016000007241F0C00AF5F00243B
+:109790008FB100148FBF00188FB0001003E00008D5
+:1097A00027BD00200E000F2302002021241F0C00E3
+:1097B000AF5F00248FB100148FBF00188FB000106E
+:1097C00003E0000827BD002094A200E094A400E27A
+:1097D00090BF0113008218263079FFFF33E700C0E5
+:1097E00014E000092F3100011600003800000000CD
+:1097F0005620FFE6241F0C000E000DDE00000000C6
+:109800000A00127A241F0C001620FFDE0000000060
+:109810000E000DDE000000001440FFDC241F0C00D1
+:10982000160000228F8300D0906901133122003F7F
+:10983000A06201130A00127A241F0C0094AF00D416
+:109840008F8600D400E02821240400050E000C7F40
+:1098500031F0FFFF1440000524030003979100E658
+:10986000000018212625FFFFA78500E68F5801B8C4
+:109870000700FFFE3C196013AF400180241F0C005D
+:10988000AF500184007938253C101000AF470188A3
+:109890008FB10014AF5001B8AF5F00248FB000103B
+:1098A0008FBF001803E0000827BD00200E000F2323
+:1098B000020020215040FFB5241F0C008F8300D0F0
+:1098C000906901130A0012A33122003F0E000F23FA
+:1098D000020020211440FFAD241F0C0012200007BD
+:1098E0008F8300D0906801133106003F34C20040DE
+:1098F000A06201130A00127A241F0C000E000DDE74
+:10990000000000005040FFA1241F0C008F8300D0F6
+:10991000906801133106003F0A0012D334C20040A0
+:10992000AF9B00C803E00008AF8000EC3089FFFF68
+:10993000000940422D020041000929801440000224
+:109940000009504024080040000879400008C0C0C9
+:1099500001F85821256701A800EF702125CC007F70
+:10996000240DFF80018D18240065302100CA2821B4
+:1099700025640088240A00883C010800AC2A004CB9
+:109980003C010800AC240050AF8500D43C01080025
+:10999000AC2900603C010800AC2800643C010800D0
+:1099A000AC2700543C010800AC2300583C010800DF
+:1099B000AC26005C03E0000800000000308300FFDC
+:1099C00030C6FFFF30E400FF8F4201B80440FFFEC5
+:1099D00000034C00012438253C08600000E82025E5
+:1099E0003C031000AF450180AF460184AF440188BD
+:1099F00003E00008AF4301B88F86001C3C096012E9
+:109A0000352700108CCB00043C0C600E358500100F
+:109A1000316A00062D480001ACE800C48CC4000483
+:109A2000ACA431808CC2000894C30002ACA2318483
+:109A300003E00008A78300E43C0308008C630050A7
+:109A40008F8400E88F86001C2402FF800064C02100
+:109A50000302C824AF5900288CCD00043305007FD1
+:109A600000BA78213C0E000C01EE2821ACAD005864
+:109A70008CC80008AF8500D03C076012ACA8005C21
+:109A80008CCC001034E80010ACAC000C8CCB000C7B
+:109A9000ACAB000894AA00143C0208008C420044BD
+:109AA00025490001A4A9001494A400143083FFFFE9
+:109AB000106200178F8400D03C0A08008D4A0040D5
+:109AC000A4AA00128CCE0018AC8E00248CCD0014F9
+:109AD000AC8D00208CC70018AC87002C8CCC0014F7
+:109AE00024060001AC8C00288D0B00BC5166001AC6
+:109AF0008D0200B48D0200B8A482003A948F003A1F
+:109B0000A48F003C948800D403E000083102FFFFDA
+:109B10003C0908008D290024A4A000148F8400D0E3
+:109B2000A4A900128CCE0018AC8E00248CCD001499
+:109B3000AC8D00208CC70018AC87002C8CCC001496
+:109B400024060001AC8C00288D0B00BC5566FFEA92
+:109B50008D0200B88D0200B4A482003A948F003ABE
+:109B6000A48F003C948800D403E000083102FFFF7A
+:109B70008F86001C3C0C08008D8C0050240BFF804D
+:109B80008CCD00083C03000C000D51C0018A40211F
+:109B9000010B4824AF8A00E8AF49002890C70007AE
+:109BA0003105007F00BA10210043282130E4000471
+:109BB0001080002FAF8500D090CF000731EE000855
+:109BC00011C0003C000000008CD9000C8CC40014B3
+:109BD0000324C02B13000026000000008CC2000CE0
+:109BE000ACA200648CCD00182402FFF8ACAD006874
+:109BF0008CCC0010ACAC00808CCB000CACAB0084E7
+:109C00008CCA001CACAA007C90A900BC0122402494
+:109C1000A0A800BC90C300073067000810E0000453
+:109C20008F8500D090AF00BC35EE0001A0AE00BC27
+:109C300090D90007333800011300000F8F8400D043
+:109C400024070020908200BC34490002A08900BC97
+:109C50008F8400D090880062310300F01467000602
+:109C6000240A0034AC8A00C00A0013B500000000CA
+:109C70000A00138F8CC2001490CB000731660002DB
+:109C800010C0000500000000908D00BC35AC000441
+:109C9000A08C00BC8F8400D090980113330F003F3C
+:109CA000A08F01138F8E00D095C500D403E000086B
+:109CB00030A2FFFFACA000640A0013900000000077
+:109CC00027BDFFD8AFB000108F90001CAFBF00249D
+:109CD000AFB40020AFB20018AFB10014AFB3001C96
+:109CE0009613000E3C07600A3C1460063264FFFFC6
+:109CF000369300100E0012E234F404108F8400D466
+:109D00003C11600E0E0009BE36310010920E001597
+:109D10003C0708008CE700603C12601231CD000F58
+:109D2000A38D00F08E0E00048E0D00089608001220
+:109D3000961F00109619001A9618001E960F001C08
+:109D4000310CFFFF33EBFFFF332AFFFF3309FFFF27
+:109D500031E6FFFF3C010800AC2B00403C0108004D
+:109D6000AC2C00243C010800AC2A0044AE29317818
+:109D7000AE26317C92020015960300163652001072
+:109D8000304400FF3065FFFF3C0608008CC60064CD
+:109D9000AE243188AE4500B492080014961900181C
+:109DA000241F0001011FC004332FFFFF3C050800E2
+:109DB0008CA50058AE5800B8AE4F00BC920C0014F1
+:109DC000AF8E00D8AF8D00DC318B00FFAE4B00C0F2
+:109DD000920A0015AE670048AE66004C314900FF9C
+:109DE000AE4900C8AE65007C3C0308008C6300509F
+:109DF0003C0408008C84004C3C0808008D0800548A
+:109E00003C0208008C42005C8FBF0024AE630080DF
+:109E10008FB00010AE8300748FB3001CAE22319C53
+:109E2000AE4200DCAE2731A0AE2631A4AE24318C88
+:109E3000AE233190AE283194AE253198AE870050D4
+:109E4000AE860054AE8500708FB10014AE4700E0BE
+:109E5000AE4600E4AE4400CCAE4300D0AE4800D4E1
+:109E6000AE4500D88FB400208FB2001803E0000880
+:109E700027BD002827BDFFE0AFB10014AFBF001819
+:109E8000241100010E000868AFB000101051000549
+:109E9000978400E6978300CC0083102B14400008C1
+:109EA0008F8500D4240700028FBF00188FB10014E3
+:109EB0008FB0001000E0102103E0000827BD002053
+:109EC0000E000C9D24040005AF8200E81040FFF650
+:109ED000240700020E00086C8F90001C979F00E67C
+:109EE0008F9900E88F8D00C827EF0001240E0050E5
+:109EF000AF590020A78F00E6A1AE00003C0C08007F
+:109F00008D8C00648F8600C8240A8000000C5E00DF
+:109F1000ACCB0074A4C0000694C9000A241FFF80C3
+:109F20003C0D000C012AC024A4D8000A90C8000AE5
+:109F300024182000011F1825A0C3000A8F8700C81D
+:109F4000A0E000788F8500C800003821A0A0008321
+:109F50003C0208008C4200508F8400E800447821C5
+:109F600001FFC824AF590028960B000231EE007F94
+:109F700001DA6021018D3021A4CB00D4960A0002C1
+:109F8000AF8600D03C0E000425492401A4C900E698
+:109F90008E080004ACC800048E030008ACC30000A7
+:109FA000A4C00010A4C00014A0C000D08F8500D0B1
+:109FB0002403FFBFA0A000D13C0408008C840064EF
+:109FC0008F8200D0A04400D28E1F000C8F8A00D058
+:109FD000978F00E4AD5F001C8E1900102410003034
+:109FE000AD590018A5400030A5510054A5510056A8
+:109FF000A54F0016AD4E0068AD580080AD580084E6
+:10A00000914D006231AC000F358B0010A14B006206
+:10A010008F8600D090C900633128007FA0C80063FC
+:10A020008F8400D02406FFFF9085006300A31024D6
+:10A03000A08200638F9100D000E01021923F00BC0D
+:10A0400037F90001A23900BC8F8A00D0938F00F04D
+:10A05000AD580064AD5000C0914E00D3000F6900B0
+:10A0600031CC000F018D5825A14B00D38F8500D036
+:10A070008F8900DCACA900E88F8800D88FBF00185A
+:10A080008FB100148FB0001027BD0020ACA800ECE9
+:10A09000A4A600D6A4A000E0A4A000E203E000086B
+:10A0A0000000000027BDFFE0AFB000108F90001C43
+:10A0B000AFB10014AFBF00188E1900043C1808009F
+:10A0C0008F180050240FFF80001989C002387021BA
+:10A0D00031CD007F01CF602401BA50213C0B000C30
+:10A0E000AF4C0028014B4021950900D4950400D6BF
+:10A0F0008E0700043131FFFFAF8800D00E00093613
+:10A10000000721C08E0600048F8300C8000629C006
+:10A11000AF4500209064003E3082004014400006AD
+:10A120008F8400D0341FFFFF948300D63062FFFF7E
+:10A13000145F000400000000948400D60E0008CBD9
+:10A140003084FFFF8E050004022030218FBF0018ED
+:10A150008FB100148FB000102404002200003821B9
+:10A16000000529C00A00130627BD002027BDFFE017
+:10A17000AFB100143091FFFFAFB00010AFBF0018B7
+:10A180001220001D000080218F86001C8CC500005D
+:10A190002403000600053F020005140230E4000716
+:10A1A00014830015304500FF2CA800061100004D57
+:10A1B000000558803C0C0800258C5A0C016C50217D
+:10A1C0008D49000001200008000000008F8E00EC87
+:10A1D000240D000111CD005900000000260B0001E4
+:10A1E0003170FFFF24CA00200211202B01403021D2
+:10A1F0001480FFE6AF8A001C020010218FBF0018F8
+:10A200008FB100148FB0001003E0000827BD0020BC
+:10A21000938700CE14E00038240400140E0013C706
+:10A22000000000008F86001C240200010A00150EA9
+:10A23000AF8200EC8F8900EC240800021128003B5B
+:10A24000240400130000282100003021240700010D
+:10A250000E001306000000000A00150E8F86001C79
+:10A260008F8700EC2405000214E5FFF62404001299
+:10A270000E001373000000008F8500E800403021BD
+:10A28000240400120E001306000038210A00150EE7
+:10A290008F86001C8F8300EC241F0003147FFFD0E7
+:10A2A000260B00010E001325000000008F8500E83A
+:10A2B0000040302124020002240400100000382154
+:10A2C000AF8200EC0E001306000000000A00150E1D
+:10A2D0008F86001C8F8F00EC2406000211E6000B15
+:10A2E000000000002404001000002821000030219C
+:10A2F0000A00152B24070001000028210E00130678
+:10A30000000030210A00150E8F86001C0E00143448
+:10A3100000000000144000128F99001C8F86001C62
+:10A32000240200030A00150EAF8200EC0E0014C0D8
+:10A33000000000000A00150E8F86001C0E00131589
+:10A340000000000024020002240400140000282160
+:10A3500000003021000038210A001548AF8200ECCF
+:10A360000040382124040010973800020000282102
+:10A370000E0013063306FFFF0A00150E8F86001C21
+:10A380008F8400C83C077FFF34E6FFFF8C85007494
+:10A390002402000100A61824AC83007403E0000826
+:10A3A000A082000510A000362CA20080274A0400DD
+:10A3B0003C0B0005240900801040000724080080A1
+:10A3C00030A6000F00C540212D030081146000025B
+:10A3D00000A0482124080080AF4B0030000000009E
+:10A3E00000000000000000001100000900003821FA
+:10A3F000014030218C8D000024E7000400E8602B30
+:10A40000ACCD0000248400041580FFFA24C60004AB
+:10A410000000000000000000000000003C0E0006EC
+:10A42000010E3825AF47003000000000000000009A
+:10A43000000000008F4F000031E800101100FFFD08
+:10A44000000000008F42003C8F43003C0049C821BF
+:10A450000323C02B13000004000000008F4C0038C1
+:10A4600025860001AF4600388F47003C00A928230D
+:10A4700000E96821AF4D003C14A0FFCE2CA2008063
+:10A4800003E000080000000027BDFFD03C020002EE
+:10A49000AFB100143C11000CAF450038AFB3001C45
+:10A4A000AF46003C00809821AF4200302405008870
+:10A4B000AF44002803512021AFBF0028AFB50024CE
+:10A4C000AFB40020AFB200180E001580AFB000107E
+:10A4D0003C1F08008FFF004C3C1808008F180064D8
+:10A4E0002410FF8003F3A82132B9007F02B0782442
+:10A4F0000018A0C0033A70210018914001D120211A
+:10A50000AF4F00280E001580025428213C0D080092
+:10A510008DAD00502405012001B35821316C007F1E
+:10A5200001705024019A4821013120210E0015802C
+:10A53000AF4A00283C0808008D0800543C0508007C
+:10A540008CA500640113382130E6007F00F0182448
+:10A5500000DA202100912021AF4300280E00158051
+:10A56000000529403C0208008C4200583C100800BD
+:10A570008E1000601200001C005388212415FF80FB
+:10A580000A0016033C14000C3226007F0235182402
+:10A5900000DA202102402821AF4300280094202126
+:10A5A0000E0015802610FFC01200000F0232882115
+:10A5B0002E05004110A0FFF4241210003226007F67
+:10A5C000001091800235182400DA20210240282151
+:10A5D000AF430028009420210E0015800000802148
+:10A5E0001600FFF3023288213C0B08008D6B005CE3
+:10A5F000240AFF802405000201734021010A482437
+:10A60000AF4900283C040800948400623110007FA8
+:10A61000021A88213C07000C0E000CCD022798215D
+:10A6200000402821026020218FBF00288FB5002420
+:10A630008FB400208FB3001C8FB200188FB10014AC
+:10A640008FB000100A00158027BD00308F83001CDA
+:10A650008C620004104000030000000003E00008CA
+:10A66000000000008C6400108C6500080A0015B919
+:04A670008C66000CE8
+:0CA67400000000000000001B0000000FB0
+:10A680000000000A000000080000000600000005AD
+:10A6900000000005000000040000000400000003AA
+:10A6A000000000030000000300000003000000039E
+:10A6B0000000000200000002000000020000000292
+:10A6C0000000000200000002000000020000000282
+:10A6D0000000000200000002000000020000000272
+:10A6E0000000000200000002000000020000000163
+:08A6F000000000010000000160
+:08A6F80008000F5808000DB026
+:10A7000008000FEC0800109408000F8008000FC02C
+:10A71000080011CC08000DCC080011F008000E1C38
+:10A7200008001630080015D808000DCC08000DCC24
+:10A7300008000DCC0800127C0800127C08000DCC2B
+:10A7400008000DCC0800157C08000DCC08000DCCCD
+:10A7500008000DCC08000DCC080013EC08000DCC4F
+:10A7600008000DCC08000DCC08000DCC08000DCC65
+:10A7700008000DCC08000DCC08000DCC08000DCC55
+:10A7800008000DCC08000DCC08000DCC08000DCC45
+:10A7900008000DCC08000FE008000DCC08000DCC1F
+:10A7A0000800152C08000DCC08000DCC08000DCCBD
+:10A7B00008000DCC08000DCC08000DCC08000DCC15
+:10A7C00008000DCC08000DCC08000DCC08000DCC05
+:10A7D00008000DCC08000DCC08000DCC08000DCCF5
+:10A7E00008000DCC08000DCC0800145808000DCC52
+:10A7F00008000DCC08001370080012E008002EA01D
+:10A8000008002EA808002E7008002E7C08002E8854
+:10A8100008002E94080046C008003F0C080046407F
+:10A82000080046C0080046C0080044C0080046C0F2
+:10A830000800470808005530080054F0080054BCD0
+:0CA84000080054900800546C08005428D4
+:04A84C000A000C767C
+:10A8500000000000000000000000000D727870355C
+:10A860002E302E306A330000050000030000000087
+:10A8700000000001000000000000000000000000D7
+:10A8800000000000000000000000000000000000C8
+:10A8900000000000000000000000000000000000B8
+:10A8A00000000000000000000000000000000000A8
+:10A8B0000000000000000000000000000000000098
+:10A8C0000000000000000000000000000000000088
+:10A8D0000000000000000000000000000000000078
+:10A8E0000000000000000000000000000000000068
+:10A8F0000000000000000000000000000000000058
+:10A900000000000000000000000000000000000047
+:10A910000000000000000000000000000000000037
+:10A920000000000000000000000000000000000027
+:10A930000000000000000000000000000000000017
+:10A940000000000000000000000000000000000007
+:10A9500000000000000000000000000000000000F7
+:10A9600000000000000000000000000000000000E7
+:10A9700000000000000000000000000000000000D7
+:10A9800000000000000000000000000000000000C7
+:10A9900000000000000000000000000000000000B7
+:10A9A00000000000000000000000000000000000A7
+:10A9B0000000000000000000000000000000000097
+:10A9C0000000000000000000000000000000000087
+:10A9D0000000000000000000000000000000000077
+:10A9E0000000000000000000000000000000000067
+:10A9F0000000000000000000000000000000000057
+:10AA00000000000000000000000000000000000046
+:10AA10000000000000000000000000000000000036
+:10AA20000000000000000000000000000000000026
+:10AA30000000000000000000000000000000000016
+:10AA40000000000000000000000000000000000006
+:10AA500000000000000000000000000000000000F6
+:10AA600000000000000000000000000000000000E6
+:10AA700000000000000000000000000000000000D6
+:10AA800000000000000000000000000000000000C6
+:10AA900000000000000000000000000000000000B6
+:10AAA00000000000000000000000000000000000A6
+:10AAB0000000000000000000000000000000000096
+:10AAC0000000000000000000000000000000000086
+:10AAD0000000000000000000000000000000000076
+:10AAE0000000000000000000000000000000000066
+:10AAF0000000000000000000000000000000000056
+:10AB00000000000000000000000000000000000045
+:10AB10000000000000000000000000000000000035
+:10AB20000000000000000000000000000000000025
+:10AB30000000000000000000000000000000000015
+:10AB40000000000000000000000000000000000005
+:10AB500000000000000000000000000000000000F5
+:10AB600000000000000000000000000000000000E5
+:10AB700000000000000000000000000000000000D5
+:10AB800000000000000000000000000000000000C5
+:10AB900000000000000000000000000000000000B5
+:10ABA00000000000000000000000000000000000A5
+:10ABB0000000000000000000000000000000000095
+:10ABC0000000000000000000000000000000000085
+:10ABD0000000000000000000000000000000000075
+:10ABE0000000000000000000000000000000000065
+:10ABF0000000000000000000000000000000000055
+:10AC00000000000000000000000000000000000044
+:10AC10000000000000000000000000000000000034
+:10AC20000000000000000000000000000000000024
+:10AC30000000000000000000000000000000000014
+:10AC40000000000000000000000000000000000004
+:10AC500000000000000000000000000000000000F4
+:10AC600000000000000000000000000000000000E4
+:10AC700000000000000000000000000000000000D4
+:10AC800000000000000000000000000000000000C4
+:10AC900000000000000000000000000000000000B4
+:10ACA00000000000000000000000000000000000A4
+:10ACB0000000000000000000000000000000000094
+:10ACC0000000000000000000000000000000000084
+:10ACD0000000000000000000000000000000000074
+:10ACE0000000000000000000000000000000000064
+:10ACF0000000000000000000000000000000000054
+:10AD00000000000000000000000000000000000043
+:10AD10000000000000000000000000000000000033
+:10AD20000000000000000000000000000000000023
+:10AD30000000000000000000000000000000000013
+:10AD40000000000000000000000000000000000003
+:10AD500000000000000000000000000000000000F3
+:10AD600000000000000000000000000000000000E3
+:10AD700000000000000000000000000000000000D3
+:10AD800000000000000000000000000000000000C3
+:10AD900000000000000000000000000000000000B3
+:10ADA00000000000000000000000000000000000A3
+:10ADB0000000000000000000000000000000000093
+:10ADC0000000000000000000000000000000000083
+:10ADD0000000000000000000000000000000000073
+:10ADE0000000000000000000000000000000000063
+:10ADF0000000000000000000000000000000000053
+:10AE00000000000000000000000000000000000042
+:10AE10000000000000000000000000000000000032
+:10AE20000000000000000000000000000000000022
+:10AE30000000000000000000000000000000000012
+:10AE40000000000000000000000000000000000002
+:10AE500000000000000000000000000000000000F2
+:10AE600000000000000000000000000000000000E2
+:10AE700000000000000000000000000000000000D2
+:10AE800000000000000000000000000000000000C2
+:10AE900000000000000000000000000000000000B2
+:10AEA00000000000000000000000000000000000A2
+:10AEB0000000000000000000000000000000000092
+:10AEC0000000000000000000000000000000000082
+:10AED0000000000000000000000000000000000072
+:10AEE0000000000000000000000000000000000062
+:10AEF0000000000000000000000000000000000052
+:10AF00000000000000000000000000000000000041
+:10AF10000000000000000000000000000000000031
+:10AF20000000000000000000000000000000000021
+:10AF30000000000000000000000000000000000011
+:10AF40000000000000000000000000000000000001
+:10AF500000000000000000000000000000000000F1
+:10AF600000000000000000000000000000000000E1
+:10AF700000000000000000000000000000000000D1
+:10AF800000000000000000000000000000000000C1
+:10AF900000000000000000000000000000000000B1
+:10AFA00000000000000000000000000000000000A1
+:10AFB0000000000000000000000000000000000091
+:10AFC0000000000000000000000000000000000081
+:10AFD0000000000000000000000000000000000071
+:10AFE0000000000000000000000000000000000061
+:10AFF0000000000000000000000000000000000051
+:10B000000000000000000000000000000000000040
+:10B010000000000000000000000000000000000030
+:10B020000000000000000000000000000000000020
+:10B030000000000000000000000000000000000010
+:10B040000000000000000000000000000000000000
+:10B0500000000000000000000000000000000000F0
+:10B0600000000000000000000000000000000000E0
+:10B0700000000000000000000000000000000000D0
+:10B0800000000000000000000000000000000000C0
+:10B0900000000000000000000000000000000000B0
+:10B0A00000000000000000000000000000000000A0
+:10B0B0000000000000000000000000000000000090
+:10B0C0000000000000000000000000000000000080
+:10B0D0000000000000000000000000000000000070
+:10B0E0000000000000000000000000000000000060
+:10B0F0000000000000000000000000000000000050
+:10B10000000000000000000000000000000000003F
+:10B11000000000000000000000000000000000002F
+:10B12000000000000000000000000000000000001F
+:10B13000000000000000000000000000000000000F
+:10B1400000000000000000000000000000000000FF
+:10B1500000000000000000000000000000000000EF
+:10B1600000000000000000000000000000000000DF
+:10B1700000000000000000000000000000000000CF
+:10B1800000000000000000000000000000000000BF
+:10B1900000000000000000000000000000000000AF
+:10B1A000000000000000000000000000000000009F
+:10B1B000000000000000000000000000000000008F
+:10B1C000000000000000000000000000000000007F
+:10B1D000000000000000000000000000000000006F
+:10B1E000000000000000000000000000000000005F
+:10B1F000000000000000000000000000000000004F
+:10B20000000000000000000000000000000000003E
+:10B21000000000000000000000000000000000002E
+:10B22000000000000000000000000000000000001E
+:10B23000000000000000000000000000000000000E
+:10B2400000000000000000000000000000000000FE
+:10B2500000000000000000000000000000000000EE
+:10B2600000000000000000000000000000000000DE
+:10B2700000000000000000000000000000000000CE
+:10B2800000000000000000000000000000000000BE
+:10B2900000000000000000000000000000000000AE
+:10B2A000000000000000000000000000000000009E
+:10B2B000000000000000000000000000000000008E
+:10B2C000000000000000000000000000000000007E
+:10B2D000000000000000000000000000000000006E
+:10B2E000000000000000000000000000000000005E
+:10B2F000000000000000000000000000000000004E
+:10B30000000000000000000000000000000000003D
+:10B31000000000000000000000000000000000002D
+:10B32000000000000000000000000000000000001D
+:10B33000000000000000000000000000000000000D
+:10B3400000000000000000000000000000000000FD
+:10B3500000000000000000000000000000000000ED
+:10B3600000000000000000000000000000000000DD
+:10B3700000000000000000000000000000000000CD
+:10B3800000000000000000000000000000000000BD
+:10B3900000000000000000000000000000000000AD
+:10B3A000000000000000000000000000000000009D
+:10B3B000000000000000000000000000000000008D
+:10B3C000000000000000000000000000000000007D
+:10B3D000000000000000000000000000000000006D
+:10B3E000000000000000000000000000000000005D
+:10B3F000000000000000000000000000000000004D
+:10B40000000000000000000000000000000000003C
+:10B41000000000000000000000000000000000002C
+:10B42000000000000000000000000000000000001C
+:10B43000000000000000000000000000000000000C
+:10B4400000000000000000000000000000000000FC
+:10B4500000000000000000000000000000000000EC
+:10B4600000000000000000000000000000000000DC
+:10B4700000000000000000000000000000000000CC
+:10B4800000000000000000000000000000000000BC
+:10B4900000000000000000000000000000000000AC
+:10B4A000000000000000000000000000000000009C
+:10B4B000000000000000000000000000000000008C
+:10B4C000000000000000000000000000000000007C
+:10B4D000000000000000000000000000000000006C
+:10B4E000000000000000000000000000000000005C
+:10B4F000000000000000000000000000000000004C
+:10B50000000000000000000000000000000000003B
+:10B51000000000000000000000000000000000002B
+:10B52000000000000000000000000000000000001B
+:10B53000000000000000000000000000000000000B
+:10B5400000000000000000000000000000000000FB
+:10B5500000000000000000000000000000000000EB
+:10B5600000000000000000000000000000000000DB
+:10B5700000000000000000000000000000000000CB
+:10B5800000000000000000000000000000000000BB
+:10B5900000000000000000000000000000000000AB
+:10B5A000000000000000000000000000000000009B
+:10B5B000000000000000000000000000000000008B
+:10B5C000000000000000000000000000000000007B
+:10B5D000000000000000000000000000000000006B
+:10B5E000000000000000000000000000000000005B
+:10B5F000000000000000000000000000000000004B
+:10B60000000000000000000000000000000000003A
+:10B61000000000000000000000000000000000002A
+:10B62000000000000000000000000000000000001A
+:10B63000000000000000000000000000000000000A
+:10B6400000000000000000000000000000000000FA
+:10B6500000000000000000000000000000000000EA
+:10B6600000000000000000000000000000000000DA
+:10B6700000000000000000000000000000000000CA
+:10B6800000000000000000000000000000000000BA
+:10B6900000000000000000000000000000000000AA
+:10B6A000000000000000000000000000000000009A
+:10B6B000000000000000000000000000000000008A
+:10B6C000000000000000000000000000000000007A
+:10B6D000000000000000000000000000000000006A
+:10B6E000000000000000000000000000000000005A
+:10B6F000000000000000000000000000000000004A
+:10B700000000000000000000000000000000000039
+:10B710000000000000000000000000000000000029
+:10B720000000000000000000000000000000000019
+:10B730000000000000000000000000000000000009
+:10B7400000000000000000000000000000000000F9
+:10B7500000000000000000000000000000000000E9
+:10B7600000000000000000000000000000000000D9
+:10B7700000000000000000000000000000000000C9
+:10B7800000000000000000000000000000000000B9
+:10B7900000000000000000000000000000000000A9
+:10B7A0000000000000000000000000000000000099
+:10B7B0000000000000000000000000000000000089
+:10B7C0000000000000000000000000000000000079
+:10B7D0000000000000000000000000000000000069
+:10B7E0000000000000000000000000000000000059
+:10B7F0000000000000000000000000000000000049
+:10B800000000000000000000000000000000000038
+:10B810000000000000000000000000000000000028
+:10B820000000000000000000000000000000000018
+:10B830000000000000000000000000000000000008
+:10B8400000000000000000000000000000000000F8
+:10B8500000000000000000000000000000000000E8
+:10B8600000000000000000000000000000000000D8
+:10B8700000000000000000000000000000000000C8
+:10B8800000000000000000000000000000000000B8
+:10B8900000000000000000000000000000000000A8
+:10B8A0000000000000000000000000000000000098
+:10B8B0000000000000000000000000000000000088
+:10B8C0000000000000000000000000000000000078
+:10B8D0000000000000000000000000000000000068
+:10B8E0000000000000000000000000000000000058
+:10B8F0000000000000000000000000000000000048
+:10B900000000000000000000000000000000000037
+:10B910000000000000000000000000000000000027
+:10B920000000000000000000000000000000000017
+:10B930000000000000000000000000000000000007
+:10B9400000000000000000000000000000000000F7
+:10B9500000000000000000000000000000000000E7
+:10B9600000000000000000000000000000000000D7
+:10B9700000000000000000000000000000000000C7
+:10B9800000000000000000000000000000000000B7
+:10B9900000000000000000000000000000000000A7
+:10B9A0000000000000000000000000000000000097
+:10B9B0000000000000000000000000000000000087
+:10B9C0000000000000000000000000000000000077
+:10B9D0000000000000000000000000000000000067
+:10B9E0000000000000000000000000000000000057
+:10B9F0000000000000000000000000000000000047
+:10BA00000000000000000000000000000000000036
+:10BA10000000000000000000000000000000000026
+:10BA20000000000000000000000000000000000016
+:10BA30000000000000000000000000000000000006
+:10BA400000000000000000000000000000000000F6
+:10BA500000000000000000000000000000000000E6
+:10BA600000000000000000000000000000000000D6
+:10BA700000000000000000000000000000000000C6
+:10BA800000000000000000000000000000000000B6
+:10BA900000000000000000000000000000000000A6
+:10BAA0000000000000000000000000000000000096
+:10BAB0000000000000000000000000000000000086
+:10BAC0000000000000000000000000000000000076
+:10BAD0000000000000000000000000000000000066
+:10BAE0000000000000000000000000000000000056
+:10BAF0000000000000000000000000000000000046
+:10BB00000000000000000000000000000000000035
+:10BB10000000000000000000000000000000000025
+:10BB20000000000000000000000000000000000015
+:10BB30000000000000000000000000000000000005
+:10BB400000000000000000000000000000000000F5
+:10BB500000000000000000000000000000000000E5
+:10BB600000000000000000000000000000000000D5
+:10BB700000000000000000000000000000000000C5
+:10BB800000000000000000000000000000000000B5
+:10BB900000000000000000000000000000000000A5
+:10BBA0000000000000000000000000000000000095
+:10BBB0000000000000000000000000000000000085
+:10BBC0000000000000000000000000000000000075
+:10BBD0000000000000000000000000000000000065
+:10BBE0000000000000000000000000000000000055
+:10BBF0000000000000000000000000000000000045
+:10BC00000000000000000000000000000000000034
+:10BC10000000000000000000000000000000000024
+:10BC20000000000000000000000000000000000014
+:10BC30000000000000000000000000000000000004
+:10BC400000000000000000000000000000000000F4
+:10BC500000000000000000000000000000000000E4
+:10BC600000000000000000000000000000000000D4
+:10BC700000000000000000000000000000000000C4
+:10BC800000000000000000000000000000000000B4
+:10BC900000000000000000000000000000000000A4
+:10BCA0000000000000000000000000000000000094
+:10BCB0000000000000000000000000000000000084
+:10BCC0000000000000000000000000000000000074
+:10BCD0000000000000000000000000000000000064
+:10BCE0000000000000000000000000000000000054
+:10BCF0000000000000000000000000000000000044
+:10BD00000000000000000000000000000000000033
+:10BD10000000000000000000000000000000000023
+:10BD20000000000000000000000000000000000013
+:10BD30000000000000000000000000000000000003
+:10BD400000000000000000000000000000000000F3
+:10BD500000000000000000000000000000000000E3
+:10BD600000000000000000000000000000000000D3
+:10BD700000000000000000000000000000000000C3
+:10BD800000000000000000000000000000000000B3
+:10BD900000000000000000000000000000000000A3
+:10BDA0000000000000000000000000000000000093
+:10BDB0000000000000000000000000000000000083
+:10BDC0000000000000000000000000000000000073
+:10BDD0000000000000000000000000000000000063
+:10BDE0000000000000000000000000000000000053
+:10BDF0000000000000000000000000000000000043
+:10BE00000000000000000000000000000000000032
+:10BE10000000000000000000000000000000000022
+:10BE20000000000000000000000000000000000012
+:10BE30000000000000000000000000000000000002
+:10BE400000000000000000000000000000000000F2
+:10BE500000000000000000000000000000000000E2
+:10BE600000000000000000000000000000000000D2
+:10BE700000000000000000000000000000000000C2
+:10BE800000000000000000000000000000000000B2
+:10BE900000000000000000000000000000000000A2
+:10BEA0000000000000000000000000000000000092
+:10BEB0000000000000000000000000000000000082
+:10BEC0000000000000000000000000000000000072
+:10BED0000000000000000000000000000000000062
+:10BEE0000000000000000000000000000000000052
+:10BEF0000000000000000000000000000000000042
+:10BF00000000000000000000000000000000000031
+:10BF10000000000000000000000000000000000021
+:10BF20000000000000000000000000000000000011
+:10BF30000000000000000000000000000000000001
+:10BF400000000000000000000000000000000000F1
+:10BF500000000000000000000000000000000000E1
+:10BF600000000000000000000000000000000000D1
+:10BF700000000000000000000000000000000000C1
+:10BF800000000000000000000000000000000000B1
+:10BF900000000000000000000000000000000000A1
+:10BFA0000000000000000000000000000000000091
+:10BFB0000000000000000000000000000000000081
+:10BFC0000000000000000000000000000000000071
+:10BFD0000000000000000000000000000000000061
+:10BFE0000000000000000000000000000000000051
+:10BFF0000000000000000000000000000000000041
+:10C000000000000000000000000000000000000030
+:10C010000000000000000000000000000000000020
+:10C020000000000000000000000000000000000010
+:10C030000000000000000000000000000000000000
+:10C0400000000000000000000000000000000000F0
+:10C0500000000000000000000000000000000000E0
+:10C0600000000000000000000000000000000000D0
+:10C0700000000000000000000000000000000000C0
+:10C0800000000000000000000000000000000000B0
+:10C0900000000000000000000000000000000000A0
+:10C0A0000000000000000000000000000000000090
+:10C0B0000000000000000000000000000000000080
+:10C0C0000000000000000000000000000000000070
+:10C0D0000000000000000000000000000000000060
+:10C0E0000000000000000000000000000000000050
+:10C0F0000000000000000000000000000000000040
+:10C10000000000000000000000000000000000002F
+:10C11000000000000000000000000000000000001F
+:10C12000000000000000000000000000000000000F
+:10C1300000000000000000000000000000000000FF
+:10C1400000000000000000000000000000000000EF
+:10C1500000000000000000000000000000000000DF
+:10C1600000000000000000000000000000000000CF
+:10C1700000000000000000000000000000000000BF
+:10C1800000000000000000000000000000000000AF
+:10C19000000000000000000000000000000000009F
+:10C1A000000000000000000000000000000000008F
+:10C1B000000000000000000000000000000000007F
+:10C1C000000000000000000000000000000000006F
+:10C1D000000000000000000000000000000000005F
+:10C1E000000000000000000000000000000000004F
+:10C1F000000000000000000000000000000000003F
+:10C20000000000000000000000000000000000002E
+:10C21000000000000000000000000000000000001E
+:10C22000000000000000000000000000000000000E
+:10C2300000000000000000000000000000000000FE
+:10C2400000000000000000000000000000000000EE
+:10C2500000000000000000000000000000000000DE
+:10C2600000000000000000000000000000000000CE
+:10C2700000000000000000000000000000000000BE
+:10C2800000000000000000000000000000000000AE
+:10C29000000000000000000000000000000000009E
+:10C2A000000000000000000000000000000000008E
+:10C2B000000000000000000000000000000000007E
+:10C2C000000000000000000000000000000000006E
+:10C2D000000000000000000000000000000000005E
+:10C2E000000000000000000000000000000000004E
+:10C2F000000000000000000000000000000000003E
+:10C30000000000000000000000000000000000002D
+:10C31000000000000000000000000000000000001D
+:10C32000000000000000000000000000000000000D
+:10C3300000000000000000000000000000000000FD
+:10C3400000000000000000000000000000000000ED
+:10C3500000000000000000000000000000000000DD
+:10C3600000000000000000000000000000000000CD
+:10C3700000000000000000000000000000000000BD
+:10C3800000000000000000000000000000000000AD
+:10C39000000000000000000000000000000000009D
+:10C3A000000000000000000000000000000000008D
+:10C3B000000000000000000000000000000000007D
+:10C3C000000000000000000000000000000000006D
+:10C3D000000000000000000000000000000000005D
+:10C3E000000000000000000000000000000000004D
+:10C3F000000000000000000000000000000000003D
+:10C40000000000000000000000000000000000002C
+:10C41000000000000000000000000000000000001C
+:10C42000000000000000000000000000000000000C
+:10C4300000000000000000000000000000000000FC
+:10C4400000000000000000000000000000000000EC
+:10C4500000000000000000000000000000000000DC
+:10C4600000000000000000000000000000000000CC
+:10C4700000000000000000000000000000000000BC
+:10C4800000000000000000000000000000000000AC
+:10C49000000000000000000000000000000000009C
+:10C4A000000000000000000000000000000000008C
+:10C4B000000000000000000000000000000000007C
+:10C4C000000000000000000000000000000000006C
+:10C4D000000000000000000000000000000000005C
+:10C4E000000000000000000000000000000000004C
+:10C4F000000000000000000000000000000000003C
+:10C50000000000000000000000000000000000002B
+:10C51000000000000000000000000000000000001B
+:10C52000000000000000000000000000000000000B
+:10C5300000000000000000000000000000000000FB
+:10C5400000000000000000000000000000000000EB
+:10C5500000000000000000000000000000000000DB
+:10C5600000000000000000000000000000000000CB
+:10C5700000000000000000000000000000000000BB
+:10C5800000000000000000000000000000000000AB
+:10C59000000000000000000000000000000000009B
+:10C5A000000000000000000000000000000000008B
+:10C5B000000000000000000000000000000000007B
+:10C5C000000000000000000000000000000000006B
+:10C5D000000000000000000000000000000000005B
+:10C5E000000000000000000000000000000000004B
+:10C5F000000000000000000000000000000000003B
+:10C60000000000000000000000000000000000002A
+:10C61000000000000000000000000000000000001A
+:10C62000000000000000000000000000000000000A
+:10C6300000000000000000000000000000000000FA
+:10C6400000000000000000000000000000000000EA
+:10C6500000000000000000000000000000000000DA
+:10C6600000000000000000000000000000000000CA
+:10C6700000000000000000000000000000000000BA
+:10C6800000000000000000000000000000000000AA
+:10C69000000000000000000000000000000000009A
+:10C6A000000000000000000000000000000000008A
+:10C6B000000000000000000000000000000000007A
+:10C6C000000000000000000000000000000000006A
+:10C6D000000000000000000000000000000000005A
+:10C6E000000000000000000000000000000000004A
+:10C6F000000000000000000000000000000000003A
+:10C700000000000000000000000000000000000029
+:10C710000000000000000000000000000000000019
+:10C720000000000000000000000000000000000009
+:10C7300000000000000000000000000000000000F9
+:10C7400000000000000000000000000000000000E9
+:10C7500000000000000000000000000000000000D9
+:10C7600000000000000000000000000000000000C9
+:10C7700000000000000000000000000000000000B9
+:10C7800000000000000000000000000000000000A9
+:10C790000000000000000000000000000000000099
+:10C7A0000000000000000000000000000000000089
+:10C7B0000000000000000000000000000000000079
+:10C7C0000000000000000000000000000000000069
+:10C7D0000000000000000000000000000000000059
+:10C7E0000000000000000000000000000000000049
+:10C7F0000000000000000000000000000000000039
+:10C800000000000000000000000000000000000028
+:10C810000000000000000000000000000000000018
+:10C820000000000000000000000000000000000008
+:10C8300000000000000000000000000000000000F8
+:10C8400000000000000000000000000000000000E8
+:10C8500000000000000000000000000000000000D8
+:10C8600000000000000000000000000000000000C8
+:10C8700000000000000000000000000000000000B8
+:10C8800000000000000000000000000000000000A8
+:10C890000000000000000000000000000000000098
+:10C8A0000000000000000000000000000000000088
+:10C8B0000000000000000000000000000000000078
+:10C8C0000000000000000000000000000000000068
+:10C8D0000000000000000000000000000000000058
+:10C8E0000000000000000000000000000000000048
+:10C8F0000000000000000000000000000000000038
+:10C900000000000000000000000000000000000027
+:10C910000000000000000000000000000000000017
+:10C920000000000000000000000000000000000007
+:10C9300000000000000000000000000000000000F7
+:10C9400000000000000000000000000000000000E7
+:10C9500000000000000000000000000000000000D7
+:10C9600000000000000000000000000000000000C7
+:10C9700000000000000000000000000000000000B7
+:10C9800000000000000000000000000000000000A7
+:10C990000000000000000000000000000000000097
+:10C9A0000000000000000000000000000000000087
+:10C9B0000000000000000000000000000000000077
+:10C9C0000000000000000000000000000000000067
+:10C9D0000000000000000000000000000000000057
+:10C9E0000000000000000000000000000000000047
+:10C9F0000000000000000000000000000000000037
+:10CA00000000000000000000000000000000000026
+:10CA10000000000000000000000000000000000016
+:10CA20000000000000000000000000000000000006
+:10CA300000000000000000000000000000000000F6
+:10CA400000000000000000000000000000000000E6
+:10CA500000000000000000000000000000000000D6
+:10CA600000000000000000000000000000000000C6
+:10CA700000000000000000000000000000000000B6
+:10CA800000000000000000000000000000000000A6
+:10CA90000000000000000000000000000000000096
+:10CAA0000000000000000000000000000000000086
+:10CAB0000000000000000000000000000000000076
+:10CAC0000000000000000000000000000000000066
+:10CAD0000000000000000000000000000000000056
+:10CAE0000000000000000000000000000000000046
+:10CAF0000000000000000000000000000000000036
+:10CB00000000000000000000000000000000000025
+:10CB10000000000000000000000000000000000015
+:10CB20000000000000000000000000000000000005
+:10CB300000000000000000000000000000000000F5
+:10CB400000000000000000000000000000000000E5
+:10CB500000000000000000000000000000000000D5
+:10CB600000000000000000000000000000000000C5
+:10CB700000000000000000000000000000000000B5
+:10CB800000000000000000000000000000000000A5
+:10CB90000000000000000000000000000000000095
+:10CBA0000000000000000000000000000000000085
+:10CBB0000000000000000000000000000000000075
+:10CBC0000000000000000000000000000000000065
+:10CBD0000000000000000000000000000000000055
+:10CBE0000000000000000000000000000000000045
+:10CBF0000000000000000000000000000000000035
+:10CC00000000000000000000000000000000000024
+:10CC10000000000000000000000000000000000014
+:10CC20000000000000000000000000000000000004
+:10CC300000000000000000000000000000000000F4
+:10CC400000000000000000000000000000000000E4
+:10CC500000000000000000000000000000000000D4
+:10CC600000000000000000000000000000000000C4
+:10CC700000000000000000000000000000000000B4
+:10CC800000000000000000000000000000000000A4
+:10CC90000000000000000000000000000000000094
+:10CCA0000000000000000000000000000000000084
+:10CCB0000000000000000000000000000000000074
+:10CCC0000000000000000000000000000000000064
+:10CCD0000000000000000000000000000000000054
+:10CCE0000000000000000000000000000000000044
+:10CCF0000000000000000000000000000000000034
+:10CD00000000000000000000000000000000000023
+:10CD10000000000000000000000000000000000013
+:10CD20000000000000000000000000000000000003
+:10CD300000000000000000000000000000000000F3
+:10CD400000000000000000000000000000000000E3
+:10CD500000000000000000000000000000000000D3
+:10CD600000000000000000000000000000000000C3
+:10CD700000000000000000000000000000000000B3
+:10CD800000000000000000000000000000000000A3
+:10CD90000000000000000000000000000000000093
+:10CDA0000000000000000000000000000000000083
+:10CDB0000000000000000000000000000000000073
+:10CDC0000000000000000000000000000000000063
+:10CDD0000000000000000000000000000000000053
+:10CDE0000000000000000000000000000000000043
+:10CDF0000000000000000000000000000000000033
+:10CE00000000000000000000000000000000000022
+:10CE10000000000000000000000000000000000012
+:10CE20000000000000000000000000000000000002
+:10CE300000000000000000000000000000000000F2
+:10CE400000000000000000000000000000000000E2
+:10CE500000000000000000000000000000000000D2
+:10CE600000000000000000000000000000000000C2
+:10CE700000000000000000000000000000000000B2
+:10CE800000000000000000000000000000000000A2
+:10CE90000000000000000000000000000000000092
+:10CEA0000000000000000000000000000000000082
+:10CEB0000000000000000000000000000000000072
+:10CEC0000000000000000000000000000000000062
+:10CED0000000000000000000000000000000000052
+:10CEE0000000000000000000000000000000000042
+:10CEF0000000000000000000000000000000000032
+:10CF00000000000000000000000000000000000021
+:10CF10000000000000000000000000000000000011
+:10CF20000000000000000000000000000000000001
+:10CF300000000000000000000000000000000000F1
+:10CF400000000000000000000000000000000000E1
+:10CF500000000000000000000000000000000000D1
+:10CF600000000000000000000000000000000000C1
+:10CF700000000000000000000000000000000000B1
+:10CF800000000000000000000000000000000000A1
+:10CF90000000000000000000000000000000000091
+:10CFA0000000000000000000000000000000000081
+:10CFB0000000000000000000000000000000000071
+:10CFC0000000000000000000000000000000000061
+:10CFD0000000000000000000000000000000000051
+:10CFE0000000000000000000000000000000000041
+:10CFF0000000000000000000000000000000000031
+:10D000000000000000000000000000000000000020
+:10D010000000000000000000000000000000000010
+:10D020000000000000000000000000000000000000
+:10D0300000000000000000000000000000000000F0
+:10D0400000000000000000000000000000000000E0
+:10D0500000000000000000000000000000000000D0
+:10D0600000000000000000000000000000000000C0
+:10D0700000000000000000000000000000000000B0
+:10D0800000000000000000000000000000000000A0
+:10D090000000000000000000000000000000000090
+:10D0A0000000000000000000000000000000000080
+:10D0B0000000000000000000000000000000000070
+:10D0C0000000000000000000000000000000000060
+:10D0D0000000000000000000000000000000000050
+:10D0E0000000000000000000000000000000000040
+:10D0F0000000000000000000000000000000000030
+:10D10000000000000000000000000000000000001F
+:10D11000000000000000000000000000000000000F
+:10D1200000000000000000000000000000000000FF
+:10D1300000000000000000000000000000000000EF
+:10D1400000000000000000000000000000000000DF
+:10D1500000000000000000000000000000000000CF
+:10D1600000000000000000000000000000000000BF
+:10D1700000000000000000000000000000000000AF
+:10D18000000000000000000000000000000000009F
+:10D19000000000000000000000000000000000008F
+:10D1A000000000000000000000000000000000007F
+:10D1B000000000000000000000000000000000006F
+:10D1C000000000000000000000000000000000005F
+:10D1D000000000000000000000000000000000004F
+:10D1E000000000000000000000000000000000003F
+:10D1F000000000000000000000000000000000002F
+:10D20000000000000000000000000000000000001E
+:10D21000000000000000000000000000000000000E
+:10D2200000000000000000000000000000000000FE
+:10D2300000000000000000000000000000000000EE
+:10D2400000000000000000000000000000000000DE
+:10D2500000000000000000000000000000000000CE
+:10D2600000000000000000000000000000000000BE
+:10D2700000000000000000000000000000000000AE
+:10D28000000000000000000000000000000000009E
+:10D29000000000000000000000000000000000008E
+:10D2A000000000000000000000000000000000007E
+:10D2B000000000000000000000000000000000006E
+:10D2C000000000000000000000000000000000005E
+:10D2D000000000000000000000000000000000004E
+:10D2E000000000000000000000000000000000003E
+:10D2F000000000000000000000000000000000002E
+:10D30000000000000000000000000000000000001D
+:10D31000000000000000000000000000000000000D
+:10D3200000000000000000000000000000000000FD
+:10D3300000000000000000000000000000000000ED
+:10D3400000000000000000000000000000000000DD
+:10D3500000000000000000000000000000000000CD
+:10D3600000000000000000000000000000000000BD
+:10D3700000000000000000000000000000000000AD
+:10D38000000000000000000000000000000000009D
+:10D39000000000000000000000000000000000008D
+:10D3A000000000000000000000000000000000007D
+:10D3B000000000000000000000000000000000006D
+:10D3C000000000000000000000000000000000005D
+:10D3D000000000000000000000000000000000004D
+:10D3E000000000000000000000000000000000003D
+:10D3F000000000000000000000000000000000002D
+:10D40000000000000000000000000000000000001C
+:10D41000000000000000000000000000000000000C
+:10D4200000000000000000000000000000000000FC
+:10D4300000000000000000000000000000000000EC
+:10D4400000000000000000000000000000000000DC
+:10D4500000000000000000000000000000000000CC
+:10D4600000000000000000000000000000000000BC
+:10D4700000000000000000000000000000000000AC
+:10D48000000000000000000000000000000000009C
+:10D49000000000000000000000000000000000008C
+:10D4A000000000000000000000000000000000007C
+:10D4B000000000000000000000000000000000006C
+:10D4C000000000000000000000000000000000005C
+:10D4D000000000000000000000000000000000004C
+:10D4E000000000000000000000000000000000003C
+:10D4F000000000000000000000000000000000002C
+:10D50000000000000000000000000000000000001B
+:10D51000000000000000000000000000000000000B
+:10D5200000000000000000000000000000000000FB
+:10D5300000000000000000000000000000000000EB
+:10D5400000000000000000000000000000000000DB
+:10D5500000000000000000000000000000000000CB
+:10D5600000000000000000000000000000000000BB
+:10D5700000000000000000000000000000000000AB
+:10D58000000000000000000000000000000000009B
+:10D59000000000000000000000000000000000008B
+:10D5A000000000000000000000000000000000007B
+:10D5B000000000000000000000000000000000006B
+:10D5C000000000000000000000000000000000005B
+:10D5D000000000000000000000000000000000004B
+:10D5E000000000000000000000000000000000003B
+:10D5F000000000000000000000000000000000002B
+:10D60000000000000000000000000000000000001A
+:10D61000000000000000000000000000000000000A
+:10D6200000000000000000000000000000000000FA
+:10D6300000000000000000000000000000000000EA
+:10D6400000000000000000000000000000000000DA
+:10D6500000000000000000000000000000000000CA
+:10D6600000000000000000000000000000000000BA
+:10D6700000000000000000000000000000000000AA
+:10D68000000000000000000000000000000000009A
+:10D69000000000000000000000000000000000008A
+:10D6A000000000000000000000000000000000007A
+:10D6B000000000000000000000000000000000006A
+:10D6C000000000000000000000000000000000005A
+:10D6D000000000000000000000000000000000004A
+:10D6E000000000000000000000000000000000003A
+:10D6F000000000000000000000000000000000002A
+:10D700000000000000000000000000000000000019
+:10D710000000000000000000000000000000000009
+:10D7200000000000000000000000000000000000F9
+:10D7300000000000000000000000000000000000E9
+:10D7400000000000000000000000000000000000D9
+:10D7500000000000000000000000000000000000C9
+:10D7600000000000000000000000000000000000B9
+:10D7700000000000000000000000000000000000A9
+:10D780000000000000000000000000000000000099
+:10D790000000000000000000000000000000000089
+:10D7A0000000000000000000000000000000000079
+:10D7B0000000000000000000000000000000000069
+:10D7C0000000000000000000000000000000000059
+:10D7D0000000000000000000000000000000000049
+:10D7E0000000000000000000000000000000000039
+:10D7F0000000000000000000000000000000000029
+:10D800000000000000000000000000000000000018
+:10D810000000000000000000000000000000000008
+:10D8200000000000000000000000000000000000F8
+:10D8300000000000000000000000000000000000E8
+:10D8400000000000000000000000000000000000D8
+:10D8500000000000000000000000000000000000C8
+:10D8600000000000000000000000000000000000B8
+:10D8700000000000000000000000000000000000A8
+:10D880000000000000000000000000000000000098
+:10D890000000000000000000000000000000000088
+:10D8A0000000000000000000000000000000000078
+:10D8B0000000000000000000000000000000000068
+:10D8C0000000000000000000000000000000000058
+:10D8D0000000000000000000000000000000000048
+:10D8E0000000000000000000000000000000000038
+:10D8F0000000000000000000000000000000000028
+:10D900000000000000000000000000000000000017
+:10D910000000000000000000000000000000000007
+:10D9200000000000000000000000000000000000F7
+:10D9300000000000000000000000000000000000E7
+:10D9400000000000000000000000000000000000D7
+:10D9500000000000000000000000000000000000C7
+:10D9600000000000000000000000000000000000B7
+:10D9700000000000000000000000000000000000A7
+:10D980000000000000000000000000000000000097
+:10D990000000000000000000000000000000000087
+:10D9A0000000000000000000000000000000000077
+:10D9B0000000000000000000000000000000000067
+:10D9C0000000000000000000000000000000000057
+:10D9D0000000000000000000000000000000000047
+:10D9E0000000000000000000000000000000000037
+:10D9F0000000000000000000000000000000000027
+:10DA00000000000000000000000000000000000016
+:10DA10000000000000000000000000000000000006
+:10DA200000000000000000001000000300000000E3
+:10DA30000000000D0000000D3C020800244271406F
+:10DA40003C030800246375E0AC4000000043202B39
+:10DA50001480FFFD244200043C1D080037BD7FFCFC
+:10DA600003A0F0213C100800261031D83C1C08000F
+:10DA7000279C71400E0010ED000000000000000D1A
+:10DA800030A5FFFF30C600FF274301808F4201B859
+:10DA90000440FFFE24020002AC640000A4650008FC
+:10DAA000A066000AA062000B3C021000AC670018E0
+:10DAB00003E00008AF4201B83C0360008C624FF8FD
+:10DAC0000440FFFE3C020200AC644FC0AC624FC495
+:10DAD0003C02100003E00008AC624FF89482000C96
+:10DAE0002486001400A038210002130200021080D6
+:10DAF0000082402100C8102B104000570000000099
+:10DB000090C300002C6200095040005190C20001F7
+:10DB1000000310803C030800246370F000431021D0
+:10DB20008C420000004000080000000090C300018B
+:10DB30002402000A1462003A0000000001061023CB
+:10DB40002C42000A1440003624C600028CE2000079
+:10DB500034420100ACE2000090C2000090C300011A
+:10DB600090C4000290C5000300031C0000021600D0
+:10DB70000043102500042200004410250045102514
+:10DB800024C60004ACE2000490C2000090C300016F
+:10DB900090C4000290C500030002160000031C00A0
+:10DBA00000431025000422000044102500451025E4
+:10DBB00024C600040A000CAAACE2000890C30001CD
+:10DBC000240200041462001624C6000290C2000061
+:10DBD00090C400018CE300000002120000441025F4
+:10DBE0003463000424C60002ACE2000C0A000CAA54
+:10DBF000ACE3000090C3000124020003146200089B
+:10DC000024C600028CE2000090C3000024C600017C
+:10DC100034420008A0E300100A000CAAACE20000A5
+:10DC200003E000082402000190C300012402000266
+:10DC30001062000224C40002010020210A000CAA84
+:10DC4000008030210A000CAA24C6000190C2000105
+:10DC50000A000CAA00C2302103E0000800001021D5
+:10DC600027BDFFE8AFBF0014AFB000100E0011FEDB
+:10DC700000808021936200052403FFFE0200202122
+:10DC8000004310248FBF00148FB00010A362000562
+:10DC90000A00120727BD001827BDFFE8AFB000102B
+:10DCA000AFBF00140E000F180080802193620000A7
+:10DCB00024030050304200FF1443000424020100FA
+:10DCC000AF4201800A000D2202002021AF400180F6
+:10DCD000020020218FBF00148FB000100A000F79BE
+:10DCE00027BD001827BDFF80AFBE0078AFB7007416
+:10DCF000AFB30064AFBF007CAFB60070AFB5006CCF
+:10DD0000AFB40068AFB20060AFB1005CAFB0005814
+:10DD10008F5001289363003F936200050000F021BB
+:10DD2000307300FF00021027304200010000B821CC
+:10DD300014400066AFA000509342011693430112B5
+:10DD4000304200FF306300FF0342202103431021D3
+:10DD5000244540008F820018104000182491400094
+:10DD60008F4201043C0300010043102410400013C3
+:10DD7000000000008CA3000C8F620030146201B51B
+:10DD8000240200018CA300108F62002C146201B1E8
+:10DD9000240200019762003A948340003042FFFF62
+:10DDA000146201AC2402000197620038962300023D
+:10DDB0003042FFFF146201A72402000193620000B9
+:10DDC000304300FF240200201062000524020050AE
+:10DDD00010620006000000000A000D6C0000000048
+:10DDE0000000000D0A000D75AFA000303C1E0800B9
+:10DDF00027DE71A00A000D75AFA000303C020800BC
+:10DE00008C4200DC244200013C010800AC2200DC12
+:10DE10000E0012C8000000000A000F038FBF007C34
+:10DE20008F4201043C0300209234000D0043102473
+:10DE30000002202B00042140AFA400308F430104D6
+:10DE40003C02004000621824146000023487004045
+:10DE50000080382132820020AFA700301440000239
+:10DE600034E6008000E0302110C0000BAFA6003087
+:10DE700093C500088F67004C0200202100052B008D
+:10DE800034A5008130A5F0810E000C8D30C600FF56
+:10DE90000A000F00000000009362003E3042004084
+:10DEA0001040000E240200045662000624020012F4
+:10DEB000020020210E0013D6022030210A000F0399
+:10DEC0008FBF007C16620005000000000E000D13DD
+:10DED000000020210A000F038FBF007C9743011A26
+:10DEE0009624000E93620035328500043076FFFFE1
+:10DEF00000442004AFA400548E32000410A000158A
+:10DF00008E3500089362003E30420040104000070A
+:10DF1000000000000E001318024020211040000DE8
+:10DF2000000000000A000F00000000008F620044A3
+:10DF30000242102304400145000000008F620048A7
+:10DF40000242102304410141240400160A000E037A
+:10DF50008FC200048F620048024210230440000870
+:10DF6000000000003C0208008C4231002442000105
+:10DF70003C010800AC2231000A000EF50000000050
+:10DF80008F62004002421023184000092402000C56
+:10DF90003C0208008C423100329400FC0000B021A9
+:10DFA000244200013C010800AC2231002402000C94
+:10DFB000AFA200308F620040005220231880000D75
+:10DFC00002C4102A14400116000000001496000636
+:10DFD00002C410233A8200013042000114400110B3
+:10DFE0000000000002C41023024490210A000DEB3F
+:10DFF0003056FFFF00002021328200021040001A3C
+:10E00000328200109362003E3042004050400011C6
+:10E010008FC200040E0011FE02002021240200180D
+:10E02000A362003F936200052403FFFE020020214B
+:10E03000004310240E001207A362000524040039D7
+:10E04000000028210E001301240600180A000F0208
+:10E0500024020001240400170040F8090000000019
+:10E060000A000F0224020001104000F80000000026
+:10E070008F63004C8F62005402A210231C4000F3F7
+:10E0800002A31023044200010060A821AFA40018DD
+:10E09000AFB20010AFB60014934201208F6500406C
+:10E0A0009763003C304200FF0342102100441021DE
+:10E0B0008FA400543063FFFF244240000083182BDC
+:10E0C0008FA40030AFA20020AFA500280083202538
+:10E0D000AFA40030AFA50024AFA0002CAFB5003432
+:10E0E0009362003E30420008504000118FC2000091
+:10E0F0000220202127A500380E000CA4AFA0003874
+:10E100005440000B8FC200008FA200383042010043
+:10E11000504000078FC200008FA3003C8F62006058
+:10E120000062102304430001AF6300608FC200004F
+:10E130000040F80927A400108FA2003030420002EE
+:10E1400054400001329400FE9362003E3042004091
+:10E15000104000378FA300148F62005416A2001ADB
+:10E160003282000124020014126200102A6200159B
+:10E1700010400006240200162402000C1262000760
+:10E18000328200010A000E5F0000000012620005EA
+:10E19000328200010A000E5F000000000A000E5AE1
+:10E1A0002417000E0A000E5A241700100A000E5EF3
+:10E1B00024170012936200232403FFBD00431024A0
+:10E1C000A362002332820001104000198FA30014C3
+:10E1D0002402000C1262000E2A62000D104000069C
+:10E1E0002402000E2402000A126200078FA20024FB
+:10E1F0000A000E7724420001126200088FA2002458
+:10E200000A000E77244200010A000E752417000848
+:10E210002402000E16E20002241700162417001034
+:10E220008FA2002424420001AFA200248FA3001477
+:10E230008FA200248F73004000431021AF62004082
+:10E240008FA20054936400368F63004002A288219D
+:10E250003402FFFF0082100400621821AF630048FF
+:10E260008FA6003030C200081040000E00000000F1
+:10E270008F6200581622000430C600FF9742011A30
+:10E280005040000134C6001093C500088FA7003429
+:10E290000200202100052B0034A500800E000C8D0B
+:10E2A00030A5F0808F620040005310231840001703
+:10E2B0008FA200183C0208008C42319830420010B6
+:10E2C0001040000924020001976200681440000613
+:10E2D00024020001A76200689742007A2442000AE3
+:10E2E0000A000EBBA7620012A76200120E0011FE08
+:10E2F000020020219362007D2403000102002021FE
+:10E30000344200010A000EB9AFA300501840000AC1
+:10E31000000000000E0011FE020020219362007D2B
+:10E320002403000102002021AFA300503442000466
+:10E330000E001207A362007D9362003E304200404F
+:10E340001440000C328200011040000A000000005E
+:10E350008F6300408FC2000424040018246300016E
+:10E360000040F809AF6300408FA200300A000F029E
+:10E37000304200048F62005810510010000000006D
+:10E380008F620018024210231C4000082404000180
+:10E390008F62001816420009000000008F62001C06
+:10E3A00002A210230440000500000000AF710058D5
+:10E3B000AFA40050AF720018AF75001C12E0000B44
+:10E3C0008FA200500E0011FE02002021A377003F13
+:10E3D0000E0012070200202102E030212404003741
+:10E3E0000E001301000028218FA2005010400003EE
+:10E3F000000000000E000C9B0200202112C000054E
+:10E40000000018218FA2003030420004504000115B
+:10E4100000601021240300010A000F020060102197
+:10E420000E0011FE020020219362007D02002021D7
+:10E43000344200040E001207A362007D0E000C9B04
+:10E44000020020210A000F0224020001AF40004414
+:10E45000240200018FBF007C8FBE00788FB700744C
+:10E460008FB600708FB5006C8FB400688FB30064F6
+:10E470008FB200608FB1005C8FB0005803E00008DD
+:10E4800027BD00808C8700048C86000000001021CE
+:10E4900000E5382100E5282B00C2302100C53021DD
+:10E4A000AC87000403E00008AC8600008F4201B88E
+:10E4B0000440FFFE24020800AF4201B803E0000858
+:10E4C000000000003C0200080342282194A20048FA
+:10E4D0003084FFFF1040001B2484001294A20048E7
+:10E4E0003042FFFF0044102A1040001724020003AE
+:10E4F0002402001A93430120A342018B8F82000063
+:10E50000306300FF30424000104000092463FFFEEA
+:10E5100094A200483042FFFF0043102B1440000536
+:10E520008F820004A74301940A000F3C344200018B
+:10E530008F8200042403FFFE0043102403E0000840
+:10E54000AF8200042402000303E00008A342018B11
+:10E5500027BDFFE0AFB20018AFB10014AFB000109C
+:10E56000AFBF001C30B1FFFF30D0FFFF30F2FFFF24
+:10E570008F4201B80440FFFE00000000AF4401805C
+:10E58000AF4400200E000F1E020020218F830000E8
+:10E590008F840004A751018CA750018EA7430190DE
+:10E5A0008F83000830828000AF4301A8A752018802
+:10E5B0001040000E8F82000493420116304200FC8E
+:10E5C00024420004005A10218C4240003042FFFFD8
+:10E5D000144000068F8200043C02FFFF34427FFF9C
+:10E5E00000821024AF8200048F8200042403BFFF46
+:10E5F00000431024A74201A69743010C8F42010457
+:10E6000000031C003042FFFF00621825AF4301AC3D
+:10E610003C021000AF4201B88FBF001C8FB200183F
+:10E620008FB100148FB0001003E0000827BD002058
+:10E630003C0208008C42003827BDFFC8AFB200285A
+:10E64000AFBF0030AFB3002CAFB10024AFB000209B
+:10E65000000090213C0E080025CE00381440000236
+:10E66000244DFFFF000068218F84000030824000AD
+:10E670001040000A308280003C02002000821024FA
+:10E6800050400006308280008F8200042403BFFFC8
+:10E69000008318240A000F9D344210001040000A25
+:10E6A0003C02002000821024104000078F820004EA
+:10E6B0003C03FFFF34637FFF008318243442800053
+:10E6C000AF820004AF8300008F48007093420112B4
+:10E6D0008F860000304200FF0002288230C2010015
+:10E6E0001040004324A4000330C24000104000103A
+:10E6F00030C2200000041080005A10218C434000DA
+:10E7000024A4000400041080AFA30010005A1021BC
+:10E710008C424000AFA2001493420116304200FC2C
+:10E72000005A10218C4240000A000FC4AFA200180A
+:10E730001040002F00041080005A10218C4340002C
+:10E7400024A4000400041080AFA30010005A10217C
+:10E750008C424000AFA00018AFA200148FA900188F
+:10E760000000382100002021240C000827AB0010F5
+:10E770003C0A0800254A010001641021148C0003A2
+:10E7800000042A001120000A00000000904200004E
+:10E79000248400012C83000C00A2102100021080B0
+:10E7A000004A10218C4200001460FFF300E238267A
+:10E7B0003C0408008C8431048F4200702C830020BC
+:10E7C00010600009004840233C030800246331081E
+:10E7D000000410800043102124830001AC48000095
+:10E7E0003C010800AC2331040A000FEFAF8700089A
+:10E7F0009743011E9742011C3063FFFF0002140083
+:10E8000000621825AF8300089742010C8F43400037
+:10E810003044FFFF3402FFFF1462000300000000D9
+:10E820000A000FFB241200208F42400030420100FA
+:10E83000544000012412001030C210005040001457
+:10E840003652000130C200201440000B3C02100080
+:10E8500000C210245040000E365200013C030E004E
+:10E860003C020DFF00C318243442FFFF0043102B6D
+:10E8700050400007365200013C0208008C42002C38
+:10E88000244200013C010800AC22002C3652000555
+:10E890003C0508008CA5003454A000248F8400009F
+:10E8A0008F82000C544000218F8400008F8200046E
+:10E8B000304240005440001D8F8400003C021F0184
+:10E8C00000C288243C021000562200188F840000E9
+:10E8D00030820200144000158F8400009750010E12
+:10E8E000AF400180AF400020261000043210FFFF2F
+:10E8F0000E000F1E020020218F8300042402BFFFA0
+:10E90000364400020062182424020002A742018C4F
+:10E910008F820000A750018EA7440188A74301A65B
+:10E92000A7420190AF5101B80A0010D93C02000182
+:10E93000008210241040000C3C0210003C02080031
+:10E940008C4200D89746010E240400802442000126
+:10E9500030C6FFFF240500023C010800AC2200D8AD
+:10E960000A0010E324070003008210241040004531
+:10E97000000000003C0208008C4200301040000DF6
+:10E980008F820004304240001040000A3C030F0018
+:10E99000008318243C0201000043102B14400005A2
+:10E9A000000000009746010E364700020A0010E002
+:10E9B0002404008010A0000D308201001040000BE4
+:10E9C0003C020F00008210243C03020010430007A9
+:10E9D0008F820008004D1024004E10219042000448
+:10E9E000244200040A00108B000221C00000000035
+:10E9F0008F8600003C0508008CA500D0000616029A
+:10EA00003050000F38A200012C4200012E03000CF0
+:10EA10000043102414400018001021C02602FFFCFF
+:10EA20002C420004544000140000202138A20002AF
+:10EA30002C42000100431024104000030006124243
+:10EA40000A00108B000020210010182B0043102416
+:10EA500050400009001021C09746010E00002021FF
+:10EA60002405000224C6000430C6FFFF0E000F413B
+:10EA70003247FFFB001021C09746010E0A0010E04C
+:10EA8000364700028F4240003C1108008E310024BE
+:10EA90003042010010400048322200010220802153
+:10EAA00010A00017325300043082010010400015FE
+:10EAB000240200013C020F00008210243C030200EB
+:10EAC0001043000F8F8200089746010E0240382144
+:10EAD000004D1024004E10219044000424C6000470
+:10EAE00030C6FFFF24840004000421C00E000F4143
+:10EAF000240500022402FFFE022280243252FFFB82
+:10EB00002402000116020007320200013242000412
+:10EB100050400001365200029746010E0A0010DFF5
+:10EB2000024038211040000A320200049746010ECC
+:10EB3000024038210000202124C6000430C6FFFF17
+:10EB40000E000F41240500023252FFFB3202000486
+:10EB50001040000B8F820000304208001040000877
+:10EB6000000000009746010E0240382124040100F5
+:10EB700024C6000430C6FFFF0E000F41240500022A
+:10EB8000166000188FBF0030274301808F4201B804
+:10EB90000440FFFE24022000A462000824020002B8
+:10EBA000A062000BA46000103C021000AF4201B84C
+:10EBB0000A0010E68FBF00301040000A8FBF0030FF
+:10EBC0009746010E364700020000202124C60004AB
+:10EBD00030C6FFFF240500020E000F4100000000B8
+:10EBE0008FBF00308FB3002C8FB200288FB100246C
+:10EBF0008FB000200000102103E0000827BD00387E
+:10EC000027BDFFE8AFB000103C04600CAFBF00149C
+:10EC10008C8250002403FF7F3C1A800000431024A4
+:10EC20003442380CAC825000240200033C106000D7
+:10EC3000AF4200088E0208083C1B80083C01080017
+:10EC4000AC2000203042FFF0384200102C4200017E
+:10EC50000E001B35AF8200183C04FFFF3C0204008D
+:10EC6000348308063442000CAE021948AE03194C36
+:10EC70003C0560168E0219808CA30000344202000D
+:10EC800000641824AE0219803C025353146200033E
+:10EC900034A47C008CA20004005020218C82007CD3
+:10ECA0008C830078AF820014AF8300103C02800098
+:10ECB000344200708C43000000403821AF83001CB8
+:10ECC000006030218CE800003C0508008CA500FCA9
+:10ECD0003C0408008C8400F8010630230000102159
+:10ECE00000A6282100A6302B0082202100862021AA
+:10ECF0003C010800AC2500FC3C010800AC2400F8F5
+:10ED00008F500000320200031040FFEE010030215E
+:10ED10008CE600003C0508008CA500FC3C040800C3
+:10ED20008C8400F800C8302300A6282100001021A0
+:10ED300000A6302B0082202100862021320700010E
+:10ED40003C010800AC2500FCAF88001C3C01080019
+:10ED5000AC2400F810E00064320200028F42012867
+:10ED6000AF4200208F4201048F430100AF820000B8
+:10ED70000E000F18AF8300048F4340003402FFFFE2
+:10ED800014620006000000009745010E3C040800D4
+:10ED9000248400F00A00115B000000008F42400054
+:10EDA000304201001040000B000000009745010EAA
+:10EDB0003C040800248400E80E000F0E30A5FFFF7D
+:10EDC0009745010E3C040800248431C80A001172E2
+:10EDD000000000008F4340008F8200101462000A80
+:10EDE000000000008F4340048F820014146200066C
+:10EDF000000000009745010E3C040800248431B84F
+:10EE00000A001172000000009745010E3C04080042
+:10EE1000248400E00E000F0E30A5FFFF3C02080026
+:10EE20008C4200C0104000088F8400003C020800A3
+:10EE30008C4200C4244200013C010800AC2200C402
+:10EE40000A00119F000000003C0200100082102404
+:10EE50001440000A8F8300043C0208008C4200200A
+:10EE6000244200013C010800AC2200200E000F7972
+:10EE7000000020210A00119D000000002402BFFFB5
+:10EE8000006210241040000800000000240287FFE8
+:10EE900000621024144000083C020060008210242C
+:10EEA00010400005000000000E000D2600000000CC
+:10EEB0000A00119D000000000E0011E80000000093
+:10EEC000104000063C0240008F4301243C026020B9
+:10EED000AC430014000000003C024000AF42013887
+:10EEE00000000000320200021040FF713C0280006E
+:10EEF0008F4201403C044000AF4200208F43014854
+:10EF00003C027000006218241064002D0000000014
+:10EF10000083102B144000063C0260003C022000DD
+:10EF2000106200073C0240000A0011E400000000EB
+:10EF300010620027000000000A0011E43C024000BB
+:10EF40008F4201482403000400021402304200FFF3
+:10EF50001443000B274401808F4301408F4201B8C6
+:10EF60000440FFFE2402001CAC830000A082000BC2
+:10EF70003C021000AF4201B80A0011E43C0240001C
+:10EF80008F4201B80440FFFE000000008F4201489C
+:10EF900000021402A482000824020002A082000BD6
+:10EFA0008F420148A48200108F420144AC820024A9
+:10EFB0003C021000AF4201B80A0011E43C024000DC
+:10EFC0000E00120C000000000A0011E43C02400098
+:10EFD0000E001B42000000003C024000AF420178DE
+:10EFE000000000000A0011193C0280008F4201005D
+:10EFF0003042003E1440001124020001AF4000489E
+:10F000008F420100304207C01040000500000000A0
+:10F01000AF40004CAF40005003E000082402000164
+:10F02000AF400054AF4000408F42010030423800F2
+:10F0300054400001AF4000442402000103E00008F6
+:10F04000000000003C0290003442000100822025B4
+:10F05000AF4400208F4200200440FFFE000000006B
+:10F0600003E00008000000003C0280003442000180
+:10F070000082202503E00008AF44002027BDFFE008
+:10F08000AFB20018AFBF001CAFB10014AFB000109A
+:10F090008F5001408F5101483C02800000119402C2
+:10F0A00002222024324300FF2402000E1062008A54
+:10F0B0002862000F10400012286200372402000668
+:10F0C0001062003B2862000710400007240200097C
+:10F0D0001060001A240200011062002500000000E8
+:10F0E0000A0012C1000000001062007B2402000B25
+:10F0F0001062005B3222FFFF0A0012C10000000014
+:10F1000010400008240200382862003510400080BA
+:10F110002402001F1062007E000000000A0012C1DD
+:10F12000000000001062007A240200801062004299
+:10F13000000000000A0012C1000000008F4201B868
+:10F140000440FFFE24020001AF500180AF40018463
+:10F15000A7520188A342018A24020002A342018B24
+:10F16000A75101908F4201440A0012BCAF4201A492
+:10F170001080000A240200023C010800A0227190C5
+:10F180003C010800AC3071988F4201443C010800FA
+:10F19000AC2271940A0012C38FBF001C8F4201B8C9
+:10F1A0000440FFFE240200020A0012A60000000034
+:10F1B0008F4201B80440FFFE00000000AF50018004
+:10F1C0003C0208009042719010400003000018219A
+:10F1D0003C0308008C637198AF430184A7520188F7
+:10F1E0003C02080090427190000018213442000156
+:10F1F000A342018A24020002A342018BA75101907D
+:10F200008F420144AF4201A43C0208009042719039
+:10F21000104000033C0210003C0308008C63719412
+:10F22000AF4301A8AF4201B83C010800A020719093
+:10F230000A0012C38FBF001C8F4201B80440FFFEBA
+:10F2400024020002A342018BA7520188A75101901A
+:10F250008F420144A74201920A0012BE3C021000F4
+:10F260001440001D000000009362000530420004BD
+:10F2700014400037000000000E0011FE02002021A3
+:10F280009362000502002021344200040E001207A0
+:10F29000A36200059362000530420004144000029E
+:10F2A000000000000000000D936200002403002015
+:10F2B000304200FF14430008000000008F4201B8F4
+:10F2C0000440FFFE24020005AF500180A342018BE1
+:10F2D0003C021000AF4201B88F4201B80440FFFE6B
+:10F2E00024020002AF400180AF500184A752018880
+:10F2F000A342018AA342018BA7510190AF4001A410
+:10F300008F420144AF4201A80A0012BE3C02100025
+:10F310008F4201B80440FFFE24020001AF5001807B
+:10F32000AF400184A7520188A342018A240200024F
+:10F33000A342018BA7510190AF4001A4AF4001A8A7
+:10F340003C021000AF4201B80A0012C38FBF001C7C
+:10F350000000000D8FBF001C8FB200188FB1001489
+:10F360008FB0001003E0000827BD002027BDFFE894
+:10F37000AFBF00100E000F1800000000AF4001806A
+:10F380008FBF0010000020210A000F7927BD001850
+:10F390003084FFFF30A5FFFF000018211080000718
+:10F3A00000000000308200011040000200042042F2
+:10F3B000006518210A0012D40005284003E0000867
+:10F3C0000060102110C0000624C6FFFF8CA20000C0
+:10F3D00024A50004AC8200000A0012DE248400048C
+:10F3E00003E000080000000010A0000824A3FFFFB5
+:10F3F000AC86000000000000000000002402FFFFB7
+:10F400002463FFFF1462FFFA2484000403E0000871
+:10F410000000000027BDFFE8AFBF0014AFB0001030
+:10F420000E0011FE008080219362007D02002021E9
+:10F43000344200200E001207A362007D020020214A
+:10F440008FBF00148FB000100A000C9B27BD00185E
+:10F45000308300FF30A500FF30C600FF2747018042
+:10F460008F4201B80440FFFE000000008F420128D7
+:10F4700034634000ACE2000024020001ACE0000470
+:10F48000A4E30008A0E2000A24020002A0E2000BAC
+:10F490003C021000A4E50010ACE00024ACE0002821
+:10F4A000A4E6001203E00008AF4201B827BDFFE860
+:10F4B000AFBF00109362003F24030012304200FFF0
+:10F4C0001043000D008030218F6200440082102321
+:10F4D0000440000A8FBF00108F62004824040039E6
+:10F4E0000000282100C21023044100042406001259
+:10F4F0000E001301000000008FBF00102402000165
+:10F5000003E0000827BD001827BDFFC8AFB1002CDD
+:10F5100000A08821AFB2003027A500100080902104
+:10F5200002202021AFBF0034AFB000280E000CA491
+:10F53000AFA0001010400009024020218E220008D8
+:10F54000AF6200840E0012F2AF6000402404003865
+:10F550002405008D0A0013CD240600129362003E9C
+:10F56000304200081040000F8FA20010304201000E
+:10F57000104000078FA300148F6200600062102308
+:10F5800004430008AF6300600A0013560000000047
+:10F59000AF6000609362003E2403FFF70043102435
+:10F5A000A362003E9362003E304200081440000215
+:10F5B0002406000300003021936200349363003777
+:10F5C0008F640084304200FF306300FF0066182122
+:10F5D000000318800043282100A4202B1080000B7A
+:10F5E000000000009763003C8F6200843063FFFFDF
+:10F5F000004510230062182B146000040000000076
+:10F600008F6200840A001372004580239762003CD9
+:10F610003050FFFF8FA30010306200041040000440
+:10F62000000628808FA2001C0A00137A0202102B09
+:10F630002E02021850400003240202180A0013830D
+:10F6400002051023306300041060000300451023FE
+:10F650008FA2001C00451023004080212C42008016
+:10F6600054400001241000800E0011FE02402021B1
+:10F6700024020001AF62000C9362003E00102040A3
+:10F680003042007FA362003E8E220004244200012B
+:10F69000AF620040A770003C8F6200509623000EBE
+:10F6A00000431021AF6200588F62005000441021C7
+:10F6B000AF62005C8E220004AF6200188E22000848
+:10F6C000AF62001C8FA20010304200085440000AB4
+:10F6D00093A20020A3600036936200362403FFDF6C
+:10F6E000A36200359362003E00431024A362003EF3
+:10F6F0000A0013AD8E220008A36200358E22000896
+:10F70000AF62004C8F6200248F63004000431021E1
+:10F71000AF6200489362000024030050304200FFB3
+:10F72000144300122403FF803C0208008C4231A0E5
+:10F730000242102100431024AF4200283C0208007E
+:10F740008C4231A08E2400083C03000C02421021A0
+:10F750003042007F0342102100431021AC4400D806
+:10F760008E230008AF820024AC4300DC0E00120799
+:10F770000240202124040038000028212406000A29
+:10F780000E001301000000008FBF00348FB2003064
+:10F790008FB1002C8FB000282402000103E0000884
+:10F7A00027BD003827BDFFE8AFBF001090C7000D90
+:10F7B00000C0282130E6001010C0000A30E200042A
+:10F7C0008CA300088F6200541062000630E200042F
+:10F7D000144000178FBF0010000020210A000D13F5
+:10F7E00027BD00181040000D30E3001210C00010BB
+:10F7F0008FBF00108CA300088F6200541462000DAC
+:10F8000024020001240400382405008D0E00130199
+:10F81000240600120A0013F98FBF00102402001200
+:10F82000146200038FBF00100A00132F27BD0018B9
+:10F830002402000103E0000827BD001827BDFFF8DF
+:10F8400027420180AFA20000308A00FF8F4201B83A
+:10F850000440FFFE000000008F4601283C02080023
+:10F860008C4231A02403FF80AF86004C00C21021DF
+:10F8700000431024AF4200243C0208008C4231A017
+:10F880008FA900008FA8000000C210213042007F25
+:10F89000034218213C02000A00621821946400D43B
+:10F8A0008FA700008FA5000024020002AF83002470
+:10F8B000A0A2000B8FA30000354260003084FFFF40
+:10F8C000A4E200083C021000AD260000AD040004D4
+:10F8D000AC60002427BD0008AF4201B803E0000877
+:10F8E000240200018C8200048F8300240045102331
+:10F8F000AC820004906200633042007FA06200632B
+:10F900008C8200209383002C8F85002434420002D7
+:10F91000AF830040A780003EAC820020A4A000E49A
+:10F9200090A200632403FFBF0043102403E00008FB
+:10F93000A0A20063274301808F4201B80440FFFE6C
+:10F940008F82004CAC6200008F420124AC62000444
+:10F9500024026083A462000824020002A062000B5B
+:10F960003C02100003E00008AF4201B88F8800405D
+:10F970009382002C8F8300243C07080024E775AC99
+:10F9800000481023304200FF304900FC2465008805
+:10F990008F860044304A0003112000090000202116
+:10F9A000248200048CA30000304400FF0089102A48
+:10F9B000ACE3000024A500041440FFF924E7000490
+:10F9C00011400009000020212482000190A30000C2
+:10F9D000304400FF008A102BA0E3000024A50001A2
+:10F9E0001440FFF924E7000130C200031440000472
+:10F9F0008F850040310200031040000D0000000020
+:10FA000010A00009000020212482000190C3000002
+:10FA1000304400FF0085102BA0E3000024C6000145
+:10FA20001440FFF924E7000103E000080000000093
+:10FA30001100FFFD00002021248200048CC300007F
+:10FA4000304400FF0088102BACE3000024C6000403
+:10FA50001440FFF924E7000403E000080000000060
+:10FA60008F8300409382002C30C600FF30A500FF3A
+:10FA700000431023304300FF8F8200240080382190
+:10FA80000043102114C0000224480088008338215C
+:10FA900030E200031440000530A2000314400003CC
+:10FAA000306200031040000D0000000010A00009AB
+:10FAB000000020212482000190E30000304400FF78
+:10FAC0000085102BA103000024E700011440FFF97A
+:10FAD0002508000103E000080000000010A0FFFD61
+:10FAE00000002021248200048CE30000304400FF49
+:10FAF0000085102BAD03000024E700041440FFF93B
+:10FB00002508000403E000080000000027BDFFF8FE
+:10FB10002402FFFFAFA20000008038212405002F3F
+:10FB20003C090800252971AC240800FF2406FFFFCA
+:10FB300090E2000024A3FFFF0006220200C210266C
+:10FB4000304200FF00021080004910218C4200006A
+:10FB5000306500FF24E7000114A8FFF5008230267D
+:10FB600000061027AFA20004AFA200000000282169
+:10FB700027A6000400C510239044000324A200011E
+:10FB800000BD1821304500FF2CA200041440FFF9ED
+:10FB9000A06400008FA2000003E0000827BD000859
+:10FBA0000080482130AAFFFF30C600FF30E7FFFF8A
+:10FBB000274801808F4201B80440FFFE8F82004C2D
+:10FBC000AD0200008F420124AD0200048D2200200E
+:10FBD000A5070008A102000A24020016A102000BDA
+:10FBE000934301208D2200088D240004306300FF20
+:10FBF000004310219783003E004410218D250024EE
+:10FC0000004310233C0308008C6331A08F84002440
+:10FC1000A502000C246300E82402FFFFA50A000EE1
+:10FC2000A5030010A5060012AD050018AD020024C2
+:10FC3000948201142403FFF73042FFFFAD02002835
+:10FC40008C820118AD02002C3C021000AD00003087
+:10FC5000AF4201B88D2200200043102403E00008C9
+:10FC6000AD2200208F82002430E7FFFF0080482172
+:10FC7000904200D330A5FFFF30C600FF0002110004
+:10FC800030420F0000E23825274801808F4201B83A
+:10FC90000440FFFE8F82004CAD0200008F42012421
+:10FCA000AD0200048D220020A5070008A102000A71
+:10FCB00024020017A102000B934301208D220008AB
+:10FCC0008D240004306300FF004310219783003E21
+:10FCD000004410218F840024004310233C030800BB
+:10FCE0008C6331A0A502000CA505000E246300E87A
+:10FCF000A5030010A5060012AD0000148D220024FB
+:10FD0000AD0200188C82005CAD02001C8C82005891
+:10FD1000AD0200202402FFFFAD020024948200E621
+:10FD20003042FFFFAD02002894820060948300BE41
+:10FD300030427FFF3063FFFF0002120000431021BA
+:10FD4000AD02002C3C021000AD000030AF4201B803
+:10FD5000948200BE2403FFF700A21021A48200BEFB
+:10FD60008D2200200043102403E00008AD22002073
+:10FD7000274301808F4201B80440FFFE240200188F
+:10FD8000AC640000A062000B8F820024944200E665
+:10FD9000A46200103C021000AC60003003E00008D8
+:10FDA000AF4201B8274301808F4201B80440FFFEF3
+:10FDB0008F8200289442001C3042FFFF000211C0D5
+:10FDC000AC62000024020019A062000B3C0210008B
+:10FDD000AC60003003E00008AF4201B88F8700300C
+:10FDE00030C300FF8F4201B80440FFFE8F82004CF9
+:10FDF00034636000ACA2000093820048A0A200051A
+:10FE00008CE20010A4A20006A4A300088C820020AB
+:10FE10002403FFF7A0A2000A24020002A0A2000B04
+:10FE20008CE20000ACA200108CE20004ACA2001432
+:10FE30008CE2001CACA200248CE20020ACA20028C2
+:10FE40008CE2002CACA2002C8C820024ACA2001806
+:10FE50003C021000AF4201B88C8200200043102405
+:10FE600003E00008AC8200209382004824030001D4
+:10FE700027BDFFE8004330042C420020AFB0001043
+:10FE8000AFBF00142410FFFE10400005274501807D
+:10FE90003C0208008C4231900A001598004610245C
+:10FEA0003C0208008C4231940046102414400007A4
+:10FEB000240600848F8300242410FFFF90620062D8
+:10FEC0003042000F34420040A06200620E00156410
+:10FED00000000000020010218FBF00148FB000103E
+:10FEE00003E0000827BD00188F83002827BDFFE02E
+:10FEF000AFB20018AFB10014AFB00010AFBF001C1C
+:10FF00009062000D00A0902130D100FF3042007FB0
+:10FF1000A062000D8F8500248E4300180080802190
+:10FF20008CA2007C146200052402000E90A20063E3
+:10FF3000344200200A0015C1A0A200630E001587FC
+:10FF4000A38200482403FFFF104300472404FFFF5F
+:10FF500052200045000020218E4300003C0200108A
+:10FF600000621024504000043C02000802002021DE
+:10FF70000A0015D024020015006210245040000928
+:10FF80008E45000002002021240200140E00158777
+:10FF9000A38200482403FFFF104300332404FFFF23
+:10FFA0008E4500003C02000200A210241040001602
+:10FFB0003C0200048F8600288CC200148CC3001001
+:10FFC0008CC40014004310230044102B5040000543
+:10FFD000020020218E43002C8CC20010106200030E
+:10FFE000020020210A001601240200123C02000433
+:10FFF00000A210245040001C0000202102002021FB
+:020000040001F9
+:100000000A0016012402001300A21024104000066A
+:100010008F8300288C6200105040001300002021C4
+:100020000A0015FB020020218C62001050400004E1
+:100030008E42002C020020210A0016012402001129
+:100040005040000900002021020020212402001756
+:100050000E001587A38200482403FFFF104300020F
+:100060002404FFFF000020218FBF001C8FB2001866
+:100070008FB100148FB000100080102103E0000841
+:1000800027BD00209383002C27BDFFE0240200340D
+:10009000AFB20018AFB10014AFBF001CAFB000107A
+:1000A000008088211462000C00A090218F84003011
+:1000B0000E0014B08C9000301202000724020005DC
+:1000C000022020210E001587A38200482403FFFF91
+:1000D0001043005F2404FFFF924200041040000917
+:1000E0008F820024022020212402000C0E0015879C
+:1000F000A38200482403FFFF104300552404FFFFA0
+:100100008F820024A38000208E4300048C44008052
+:100110003C0200FF3442FFFF006218240083202BC2
+:1001200010800008AF83003802202021240200192B
+:100130000E001587A38200482403FFFF10430044EC
+:100140002404FFFF9782003E8F8700408F8800388D
+:100150000047102311000039A782003E8F8600243B
+:100160003045FFFF8F84004C90C300BC3C02080068
+:100170008C4231A0000318823070000100822021DF
+:10018000001010800102102100A2282B10A00010E6
+:10019000248200888F8400301082000D3C033F01D0
+:1001A0008E420000004310243C0325001443000647
+:1001B00030E500FF8C820000ACC200888C82001009
+:1001C0000A001661ACC200980E00148500003021B0
+:1001D0008F850038938300208F86002430A200038F
+:1001E000000210233042000300433821A38700207F
+:1001F00094C400E400A228218F8300408F82004431
+:1002000034841000A4C400E400431021AF820044F1
+:100210001200000EAF85004024E20004A3820020FB
+:1002200094C200E424A30004AF83004034422000C1
+:10023000A4C200E40A001681000020218F8200443D
+:10024000AF80004000471021AF8200440000202111
+:100250008FBF001C8FB200188FB100148FB0001038
+:100260000080102103E0000827BD00208F860024B5
+:1002700027BDFFE8AFBF0014AFB0001090C200630D
+:10028000304200201040000830A500FF8CC2007CE6
+:100290002403FFDF24420001ACC2007C90C2006353
+:1002A00000431024A0C2006310A000238F83002409
+:1002B00027500180020028210E00156424060082C8
+:1002C0008F82002490420063304200405040001969
+:1002D000A38000488F8300308F4201B80440FFFEA6
+:1002E0008F82004CAE02000024026082A602000849
+:1002F00024020002A202000B8C620008AE02001071
+:100300008C62000CAE0200148C620014AE02001865
+:100310008C620018AE0200248C620024AE02002819
+:100320008C620028AE02002C3C021000AF4201B8E3
+:10033000A38000488F8300248FBF00148FB000106B
+:100340009062006327BD00183042007FA062006306
+:100350009782003E8F8600408F8500249383002C77
+:1003600000461023A782003EA4A000E490A40063EE
+:100370008F820044AF8300402403FFBF004610215A
+:1003800000832024AF820044A0A400638F82002455
+:10039000A04000BD8F82002403E00008A44000BEFE
+:1003A0008F8A002427BDFFE0AFB10014AFB000106A
+:1003B0008F880040AFBF001893890020954200E469
+:1003C00030D100FF0109182B0080802130AC00FFE4
+:1003D0003047FFFF0000582114600003310600FF82
+:1003E00001203021010958239783003E0068102B1B
+:1003F00014400032000000001468000724020001CD
+:100400008E0200202403FFFB34E780000043102409
+:10041000AE0200202402000134E7088015820005A6
+:100420003165FFFF0E0014D5020020210A001716C7
+:10043000020020210E001506020020210E001549A1
+:100440008F84004C8F840024948200602442000139
+:10045000A4820060948200603C0308008C633188B1
+:1004600030427FFF5443000F02002021948200603D
+:100470002403800000431024A48200609082006066
+:1004800090830060304200FF000211C2000210277A
+:10049000000211C03063007F00621825A083006055
+:1004A00002002021022028218FBF00188FB10014E4
+:1004B0008FB000100A00168827BD0020914200630B
+:1004C0002403FF8000431025A14200639782003E71
+:1004D0003048FFFF11000020938300208F84002408
+:1004E000004B1023304600FF948300E42402EFFF0A
+:1004F0000168282B00621824A48300E414A00003E0
+:100500008E02002001005821000030212403FFFB4F
+:1005100034E7800000431024AE02002024020001D2
+:10052000158200053165FFFF0E0014D50200202161
+:100530000A00173E9783003E0E0015060200202198
+:100540009783003E8F820040A780003E0043102327
+:10055000AF820040938300208F8200248FBF001859
+:100560008FB100148FB0001027BD002003E00008F9
+:10057000A04300BD8F82002490430088904500BDB9
+:10058000244900883063003F2463FFE02402000117
+:10059000006238042C63002030E80019A385002095
+:1005A00010600010AF8900303C028000344200022D
+:1005B00024050001240600011500000800E21824AB
+:1005C000000028211460000530E2002010400005E2
+:1005D000240500019126000130C600010A0016D54D
+:1005E0000000000003E000080000000027BDFFD865
+:1005F000AFB000108F900030AFB40020AFB1001446
+:10060000AFBF0024AFB3001CAFB200188E050010BE
+:100610003C0208008C4231B08F86003430A33FFF8B
+:100620000062182B8CD30014008088218CD200200B
+:10063000106000780000A02190C3000D2402FF800C
+:1006400000431024304200FF50400073022020215C
+:1006500000051382304200035440006F0220202125
+:1006600094C3001C8F8200248E050028A44301142B
+:100670008CC2001002621823146500072402001FB8
+:100680008F820038006210210262102B1040000897
+:100690008F830028240200180E001587A3820048CB
+:1006A0002403FFFF1043006F2404FFFF8F83002803
+:1006B0008F8400388C620010024490210044102383
+:1006C000AC6200108F820024AC7200208C42006863
+:1006D0000052102B104000098F830034022020218B
+:1006E0002402001D0E001587A38200482403FFFF8B
+:1006F0001043005C2404FFFF8F8300348E0200242B
+:100700008C63002410430007022020212402001CD7
+:100710000E001587A38200482403FFFF10430051F9
+:100720002404FFFF8F8400288C82002424420001CF
+:10073000AC820024125300048F8200248C42006893
+:100740005642000E8E0200008E0200003C03008024
+:10075000004310241440000D2402001A022020211E
+:100760000E001587A38200482403FFFF1043003DBD
+:100770002404FFFF0A0017D28E0200143C030080FD
+:1007800000431024504000038E020014AC8000206F
+:100790008E0200142412FFFF105200062402001BD8
+:1007A000022020210E001587A38200481052002D40
+:1007B0002404FFFF8E0300003C02000100621024AD
+:1007C0001040001F3C02008000621024144000080A
+:1007D000022020212402001A0E001587A38200485F
+:1007E0002403FFFF1043001F2404FFFF02202021E9
+:1007F000020028210E0015A7240600012403FFFF94
+:100800002404FFFF1443000E241400010A001807FB
+:100810008FBF0024022020212402000D8FBF00245E
+:100820008FB400208FB3001C8FB200188FB100145A
+:100830008FB0001027BD00280A001587A38200484A
+:100840008F8300280220202102803021946200360C
+:1008500024050001244200010E0016D5A4620036D2
+:10086000000020218FBF00248FB400208FB3001C14
+:100870008FB200188FB100148FB0001000801021CB
+:1008800003E0000827BD00288F83002427BDFFD880
+:10089000AFB40020AFB3001CAFB20018AFB100146A
+:1008A000AFB00010AFBF0024906200638F910030A2
+:1008B0002412FFFF3442004092250000A062006332
+:1008C0008E2200100080982130B0003F10520006A8
+:1008D0000360A0212402000D0E001587A3820048AA
+:1008E000105200522404FFFF8F8300248E22001830
+:1008F0008C63007C10430007026020212402000E5C
+:100900000E001587A38200482403FFFF1043004711
+:100910002404FFFF24040020120400048F83002419
+:100920009062006334420020A06200638F8500382B
+:1009300010A0001E00000000560400048F82002456
+:10094000026020210A0018512402000A9683000A3E
+:100950002404FFFD944200603042FFFF1043003446
+:100960008FBF00243C0208008C42318C0045102BC4
+:100970001440000602602021000028210E0016D538
+:10098000240600010A001878000020212402002D0E
+:100990000E001587A38200482403FFFF10430023A5
+:1009A0002404FFFF0A001878000020211604000527
+:1009B0008F8400248E2300142402FFFF506200184D
+:1009C000026020219482006024420001A482006021
+:1009D000948200603C0308008C63318830427FFFC2
+:1009E0005443000F026020219482006024038000A1
+:1009F00000431024A4820060908200609083006015
+:100A0000304200FF000211C200021027000211C094
+:100A10003063007F00621825A083006002602021FF
+:100A20000E00168824050001000020218FBF00243D
+:100A30008FB400208FB3001C8FB200188FB1001448
+:100A40008FB000100080102103E0000827BD0028AF
+:100A50008F83002427BDFFE8AFB00010AFBF0014A4
+:100A6000906200638F870030008080213442004014
+:100A70008CE60010A06200633C0308008C6331B078
+:100A800030C23FFF0043102B1040004E8F850034D2
+:100A90002402FF8090A3000D00431024304200FF89
+:100AA0005040004902002021000613823048000314
+:100AB00024020002550200440200202194A2001CDE
+:100AC0008F85002424030023A4A201148CE60000D7
+:100AD000000616023042003F104300103C03008322
+:100AE0008CE300188CA2007C106200062402000E29
+:100AF0000E001587A38200482403FFFF104300382F
+:100B00002404FFFF8F83002490620063344200209E
+:100B1000A06200630A0018BD8F83002800C3102460
+:100B2000144300078F83002890A200623042000F18
+:100B300034420020A0A20062A388003C8F830028DA
+:100B40009062000D3042007FA062000D8F8300385C
+:100B500010600018020020218F8400348C82001065
+:100B60000043102B1040000924020018020020212D
+:100B70000E001587A38200482403FFFF10430018CE
+:100B80002404FFFF0A0018E5000020218C820010D9
+:100B90002405000102002021004310238F83002838
+:100BA000240600010E0016D5AC6200100A0018E5FC
+:100BB000000020210E001688240500010A0018E517
+:100BC00000002021020020212402000D8FBF00140C
+:100BD0008FB0001027BD00180A001587A3820048B7
+:100BE0008FBF00148FB000100080102103E00008B8
+:100BF00027BD001827BDFFD8AFB000108F90003080
+:100C0000AFB3001CAFBF0020AFB20018AFB10014EB
+:100C10008E1200103C0308008C6331B032423FFF5B
+:100C20000043102B1040007C008098218F850034F9
+:100C30002402FF8090A3000D00431024304200FFE7
+:100C400050400076026020210012138230420003DF
+:100C500024030001544300710260202190A2000D82
+:100C600030420008544000038F8200380A001915F2
+:100C700024020024504000038E03000C0A001915C2
+:100C8000240200278CA20020146200052402002008
+:100C90008E0300088CA200241062000824020020A9
+:100CA0000E001587A38200482403FFFF1043006A4B
+:100CB0002404FFFF0A0019408F8400288E020014CC
+:100CC0002411FFFF145100038F8700240A00193BF1
+:100CD000240200258E0300188CE2007C14620016AA
+:100CE0002402000E8E0300248CA20028146200123D
+:100CF000240200218E0600288CA2002C14C2000EB3
+:100D00002402001F8E03002C1060000B240200231D
+:100D10008CE200680043102B1440000724020026D8
+:100D20008CA20014006618210043102B50400007CD
+:100D30008F840028240200220E001587A382004819
+:100D4000105100452404FFFF8F8400282403FFF77F
+:100D50009082000D00431024A082000D8F86002495
+:100D60003C0308008C6331AC8F82004C94C400E0DB
+:100D70008F8500280043102130847FFF000420402D
+:100D8000004410213043007F034320213C03000E28
+:100D9000008320212403FF8000431024AF42002C55
+:100DA000A49200008CA2002824420001ACA20028DA
+:100DB0008CA2002C8E03002C00431021ACA2002C2E
+:100DC0008E02002CACA200308E020014ACA20034C3
+:100DD00094A2003A24420001A4A2003A94C600E082
+:100DE0003C0208008C4231B024C4000130837FFFF4
+:100DF000146200130080302124028000008230241D
+:100E000030C2FFFF000213C2304200FF0002102771
+:100E10000A00197D000233C0026020212402000D67
+:100E20008FBF00208FB3001C8FB200188FB1001449
+:100E30008FB0001027BD00280A001587A382004844
+:100E40008F82002402602021240500010E001688F4
+:100E5000A44600E0000020218FBF00208FB3001CBB
+:100E60008FB200188FB100148FB0001000801021D5
+:100E700003E0000827BD002827BDFFE0AFB1001444
+:100E80008F910030AFB00010AFBF00188E26001059
+:100E90003C0308008C6331B030C23FFF0043102B8D
+:100EA0001040005E008080218F8500342402FF8086
+:100EB00090A3000D00431024304200FF5040005822
+:100EC000020020218F8200381040000800061382A3
+:100ED0008F8200249763000A2404FFFD944200607F
+:100EE0003042FFFF104300550006138230420003DA
+:100EF0001440000E00000000922200021040000585
+:100F00008E23002450600015922300030A0019B6B6
+:100F1000020020218CA200245062001092230003C2
+:100F2000020020210A0019BE2402000F90A2000D29
+:100F3000304200085440000992230003020020219F
+:100F4000240200100E001587A38200482403FFFF2F
+:100F50001043003A2404FFFF9223000324020002FE
+:100F60005462000C922200038F8200385440000922
+:100F700092220003020020212402002C0E0015877B
+:100F8000A38200482403FFFF1043002C2404FFFF2A
+:100F9000922200030220282102002021384600105E
+:100FA0002CC600012C4200010E0015A7004630257A
+:100FB0002411FFFF105100212404FFFF8F8300380C
+:100FC00010600012020020213C0208008C42318C8B
+:100FD0000043102B144000060000000000002821F0
+:100FE0000E0016D5240600010A0019FC000020217D
+:100FF0002402002D0E001587A38200481051000F17
+:101000002404FFFF0A0019FC000020210E001688AE
+:10101000240500010A0019FC000020210200202103
+:101020002402000D8FBF00188FB100148FB0001084
+:1010300027BD00200A001587A38200488FBF001833
+:101040008FB100148FB000100080102103E0000861
+:1010500027BD00209383003C27BDFFE0240200024F
+:10106000AFB10014AFB0001000808821AFBF0018EE
+:10107000000080211062008C2404FFFD9785003E53
+:101080008F83004030A2FFFF0043102B5440007DAF
+:101090008F8400440E001448000000003C02080049
+:1010A000244275AC02202021004028210E00160E9B
+:1010B000AF8200302409FFFF1049007B2404FFFFAA
+:1010C0003C0808008D0875BC3C0208008C4231B019
+:1010D0003C030800906375AC31043FFF0082102B85
+:1010E0001040001B3067003F3C0208008C4231A8D2
+:1010F0008F83004C000421800062182100641821B5
+:101100003062007F034228213C02000C00A228210B
+:101110003C020080344200013066007800C2302575
+:101120002402FF8000621024AF42002830640007D0
+:10113000AF4208048F820024034420212484094004
+:10114000AF460814AF850028AF840034AC430118C3
+:101150009383003C240200031462003B240200013C
+:101160002402002610E2003D28E200271040001370
+:10117000240200322402002210E2003828E2002378
+:1011800010400008240200242402002010E2002461
+:101190002402002110E2001E022020210A001A7BF6
+:1011A0002402000B10E2002D2402002510E20010A2
+:1011B000022020210A001A7B2402000B10E2001AF0
+:1011C00028E20033104000062402003F24020031D0
+:1011D00010E2000B022020210A001A7B2402000BDF
+:1011E00010E20011022020210A001A7B2402000BC9
+:1011F0000E001768022020210A001A960040802164
+:101200000E0018EA022020210A001A9600408021D0
+:101210000E00198B022020210A001A96004080211E
+:101220001509000E000000000E00180F02202021FA
+:101230000A001A96004080210E001587A3820048FC
+:101240000A001A9600408021146200170200202133
+:101250002402002314E200052402000B0E00188172
+:10126000022020210A001A9600408021022020211D
+:10127000A38200480E0015872410FFFF0A001A976A
+:101280000200202130A500FF0E0014852406000175
+:101290009783003E8F820040A780003E00431023CA
+:1012A000AF820040020020218FBF00188FB10014D0
+:1012B0008FB000100080102103E0000827BD00203F
+:1012C00027BDFFE0AFB10014AFBF0018AFB00010F2
+:1012D0008F4601283C0308008C6331A02402FF8064
+:1012E000AF86004C00C318213065007F03452821DC
+:1012F000006218243C02000AAF43002400A2282107
+:1013000090A2006200808821AF850024304200FF57
+:1013100000021102A382003C90A200BC30420002F5
+:101320001440000224030034240300308F82002480
+:10133000A383002C9383003C8C4200C0A380004810
+:10134000AF82004024020004106200308F8400400D
+:101350008E2400045080002D8F8400408E220010C7
+:101360003083FFFFA784003E1060001FAF8200445F
+:101370008F8300242405FF800220202190620063D7
+:1013800000A21024304200FF1440000D00000000B5
+:101390000E001A029790003E1040001000401821E5
+:1013A0002402FFFD546200118E2300200200282138
+:1013B0000E001426022020210A001AE88E230020A5
+:1013C0009062006300A21024304200FF104000032E
+:1013D000022020210E00174A000000009782003EE4
+:1013E0001440FFE48F8300248E2300203062000429
+:1013F000104000068F8400402402FFFB006210248E
+:101400000E00143AAE2200208F8400408F83002407
+:101410008FBF00188FB100148FB00010240200019C
+:1014200027BD002003E00008AC6400C030A500FF29
+:101430002403000124A900010069102B1040000CB6
+:1014400000004021240A000100A31023004A3804B0
+:1014500024630001308200010069302B104000023B
+:10146000000420420107402554C0FFF800A31023C8
+:1014700003E000080100102127BDFFE03C021EDC54
+:10148000AFB20018AFB10014AFBF001CAFB0001076
+:1014900034526F4100008821240500080E001AF81C
+:1014A00002202021001180803C07080024E771AC55
+:1014B0000002160002071821AC620000000028217B
+:1014C00024A200013045FFFF8C6200002CA600081A
+:1014D00004410002000220400092202614C0FFF8C0
+:1014E000AC640000020780218E0400000E001AF890
+:1014F00024050020262300013071FFFF2E23010068
+:101500001460FFE5AE0200008FBF001C8FB2001810
+:101510008FB100148FB0001003E0000827BD002039
+:101520003C02080024426A743C010800AC2271A00D
+:101530003C02080024424FF03C010800AC2271A498
+:10154000240200063C010800A02271A80A001B0B1F
+:101550000000000027BDFFD8AFB3001CAFB20018D9
+:10156000AFBF0020AFB10014AFB000108F510140E9
+:101570008F48014800089402324300FF311300FFF6
+:101580008F4201B80440FFFE27500180AE110000D9
+:101590008F420144AE02000424020002A612000899
+:1015A000A202000B24020014AE13002410620025D6
+:1015B00028620015104000082402001524020010C3
+:1015C0001062003024020012106200098FBF002058
+:1015D0000A001C358FB3001C106200702402002228
+:1015E000106200378FBF00200A001C358FB3001C2B
+:1015F0003C0208008C4231A02403FF80022210210B
+:1016000000431024AF4200243C0208008C4231A069
+:10161000022210213042007F034218213C02000ABE
+:1016200000621821166000BCAF8300249062006243
+:101630003042000F34420030A06200620A001C34C5
+:101640008FBF00203C0460008C832C083C02F00318
+:101650003442FFFF00621824AC832C083C020800CF
+:101660008C4231A08C832C0824420074000210822A
+:101670000002148000621825AC832C080A001C3478
+:101680008FBF00203C0208008C4231A02403FF8061
+:101690000222102100431024AF4200243C02080023
+:1016A0008C4231A03C03000A022210213042007F0C
+:1016B00003421021004310210A001C33AF82002492
+:1016C0003C0208008C4231A02405FF800222102138
+:1016D00000451024AF4200243C0208008C4231A097
+:1016E000022210213042007F034218213C02000AEE
+:1016F000006218219062006300A21024304200FFB3
+:1017000010400085AF8300242462008894430012B7
+:101710003C0208008C4231A830633FFF000319806F
+:1017200002221021004310213043007F0343202177
+:10173000004510243C03000C00832021AF42002808
+:101740009082000D00A21024304200FF1040007271
+:10175000AF8400289082000D304200101440006FCA
+:101760008FBF00200E001556000000008F4201B808
+:101770000440FFFE00000000AE1100008F42014453
+:10178000AE02000424020002A6120008A202000B0E
+:10179000AE1300240A001C348FBF00202406FF80F3
+:1017A00002261024AF4200203C0208008C4231A0E7
+:1017B00031043FFF00042180022210210046102442
+:1017C000AF4200243C0308008C6331A83C020800AF
+:1017D0008C4231A03227007F0223182102221021DF
+:1017E000006418213042007F3064007F03422821CA
+:1017F0003C02000A0066182400A22821034420218C
+:101800003C02000C00822021AF4300283C0200086B
+:101810000347182100629021AF850024AF8400287F
+:101820000E001556010080218F4201B80440FFFED2
+:101830008F8200288F840024274501809042000D6C
+:10184000ACB10000A4B000060002160000021603AE
+:1018500000021027000237C214C00016248200883C
+:101860009442001232033FFF30423FFF1443001204
+:1018700024026082908300632402FF8000431024CE
+:10188000304200FF5040000C2402608290820062CF
+:101890003042000F34420040A08200622402608483
+:1018A000A4A200082402000DA0A200050A001C1E2C
+:1018B0003C02270024026082A4A20008A0A0000528
+:1018C0003C02270000061C000062182524020002CA
+:1018D000A0A2000BACA30010ACA00014ACA000248C
+:1018E000ACA00028ACA0002C8E42004C8F840028B5
+:1018F000ACA200189083000D2402FF800043102446
+:10190000304200FF104000058FBF00209082000D84
+:101910003042007FA082000D8FBF00208FB3001CDB
+:101920008FB200188FB100148FB000103C0210006D
+:0C19300027BD002803E00008AF4201B80A
+:04193C00080033F874
+:10194000080033F808003370080033A8080033DCBF
+:10195000080034000800340008003400080032E0B9
+:101960000A00012200000000000000000000000D3D
+:10197000747061352E302E306A330000050000018E
+:101980000000000000000000000000000000000057
+:101990000000000000000000000000000000000047
+:1019A0000000000000000000000000000000000037
+:1019B0000000000000000000000000000000000027
+:1019C0000000000000000000000000000000000017
+:1019D0000000000000000000000000000000000007
+:1019E00000000000000000000000000010000003E4
+:1019F000000000000000000D0000000D3C02080087
+:101A000024421B803C03080024632014AC400000E7
+:101A10000043202B1480FFFD244200043C1D0800DD
+:101A200037BD2FFC03A0F0213C10080026100488CD
+:101A30003C1C0800279C1B800E00015A000000007F
+:101A40000000000D3084FFFF308200078F850018F2
+:101A500010400002248300073064FFF80085302125
+:101A600030C41FFF03441821247B4000AF85001CB5
+:101A7000AF84001803E00008AF4400843084FFFF07
+:101A8000308200078F8500208F86002810400002DA
+:101A9000248300073064FFF8008520210086182B7E
+:101AA00014600002AF85002400862023034428210F
+:101AB00034068000AF840020AF44008000A62021BF
+:101AC00003E00008AF84003827BDFFD8AFB3001C87
+:101AD000AFB20018AFB00010AFBF0024AFB4002009
+:101AE000AFB100143C0860088D1450002418FF7F2B
+:101AF0003C1A8000029898243672380CAD125000BF
+:101B00008F5100083C07601C3C0860003630000123
+:101B1000AF500008AF800018AF400080AF40008495
+:101B20008CE600088D0F08083C0760168CEC00005E
+:101B300031EEFFF039CA00103C0DFFFF340B80007E
+:101B40003C030080034B48212D440001018D2824D3
+:101B50003C0253533C010800AC230420AF890038F9
+:101B6000AF860028AF840010275B400014A200035A
+:101B700034E37C008CF90004032818218C7F007C5E
+:101B80008C6500783C02800034520070AF85003CC8
+:101B9000AF9F00403C13080026731BC40240A021E5
+:101BA0008E4800008F46000038C3000130640001F9
+:101BB00010800017AF880034028048218D2D00006E
+:101BC0003C1908008F39045C3C1108008E31045820
+:101BD00001A8F823033F7821000040210228382182
+:101BE00001FF802B00F070213C010800AC2F045C49
+:101BF0003C010800AC2E04588F4C0000398B0001CA
+:101C0000316A00011540FFED01A04021AF8D003485
+:101C10008E4E00003C0C08008D8C045C3C0A0800D1
+:101C20008D4A045801C86823018D282100005821DD
+:101C300000AD302B014B2021008610213C01080013
+:101C4000AC25045C3C010800AC2204588F45010817
+:101C50008F44010030A92000AF850000AF84000C44
+:101C60001120000A00A030213C0708008CE7042C5A
+:101C700024EF00013C010800AC2F042C3C10400074
+:101C8000AF5001380A0001900000000030B002009F
+:101C90001600001424110F001091001224070D00EB
+:101CA0001087023330B000065200FFF53C104000B0
+:101CB000936D0000240C001031A600F010CC0269D6
+:101CC000240E007010CE02DD8F8B001425670001FA
+:101CD000AF8700143C104000AF5001380A0001905B
+:101CE00000000000974801041100FFE53C1040008F
+:101CF00030B84000170000A2000000008F590178A2
+:101D00000720FFFE8F8700382409000824050800FB
+:101D10008CE30008AF450178A7490140A740014284
+:101D2000974201048F8600003049FFFF30DF000139
+:101D300013E002D5012040212524FFFE240A0002E1
+:101D4000A74A01463088FFFFA74401483C0B080022
+:101D50008D6B043C156002C48F8F000C30C30020D3
+:101D600014600002240400092404000130CD0C009A
+:101D7000240C040051AC000134840004A744014A3F
+:101D80003C0508008CA504203C0200483C190001D9
+:101D900000A2F82530D8000203F92825130000041A
+:101DA000000018213C04010000A4282524030001A0
+:101DB00030CA000451400005AF8300083C06001003
+:101DC00000A6282524030001AF830008AF451000BA
+:101DD0000000000000000000000000000000000003
+:101DE0008F83000810600023000000008F4B10005C
+:101DF0000561FFFE000000001060001E00000000F2
+:101E00008F4D10003C03002001A3602411800019B5
+:101E10008F8F000031EE000211C00016000000009C
+:101E2000975010141600001300000000974510088A
+:101E300030BFFFFF27F800060018C8820019308065
+:101E400000C72821331100013303000312200320AF
+:101E50008CA200000000000D00C7F821AFE20000D6
+:101E60003C1908008F390430272600013C01080086
+:101E7000AC2604308F6A00003405FFFFAF8A0004EF
+:101E80008CE200001045029A000020218CE5000041
+:101E900030BF010013E0027E010020213C07080052
+:101EA0008CE704743C1008008E10044C00E85821A4
+:101EB0003C1808008F1804700168882B3C08080043
+:101EC0008D0804480000782102046021030F1821C6
+:101ED0000184702B010F68210071502101AE102187
+:101EE0003C010800AC2C044C3C010800AC22044826
+:101EF0003C010800AC2B04743C010800AC2A0470BF
+:101F00008F8D0018012030213129000725AE0008EF
+:101F100031C21FFF03426021AF8D001CAF82001849
+:101F2000259B4000AF420084112000038F900020C9
+:101F300024C800073106FFF88F84002800D028212C
+:101F400000A4782B15E00002AF90002400A4282301
+:101F50000345202134038000008310213C0610003B
+:101F6000AF850020AF820038AF450080AF460178D2
+:101F70008F8B0014256700010A0001DDAF87001474
+:101F80008F6200088F670000241100300007C6022E
+:101F9000330300F0107100A2241900401479FF4BA4
+:101FA0008F8B00148F4A01780540FFFE30A7020096
+:101FB00014E00003000512820000000D00051282EB
+:101FC000305000030010490001307021000E68807D
+:101FD00001B06021000C5880017380218E08000040
+:101FE00015000002000000000000000D8F6F0004CB
+:101FF00005E202B19203000692070005920F000469
+:102000003C0200010007288000B060218D89001883
+:102010002771000825EE000501226821000E30829C
+:10202000AD8D0018022020210E0005802605001429
+:10203000920B00068F7F00043C087FFF000B20807E
+:10204000009130218CC30004350AFFFF03EAC82445
+:102050000079C021ACD80004920700059209000461
+:10206000960D00080007288000B1F8218FEF0000CE
+:10207000974201043C07FFFF01E75024304EFFFF69
+:1020800001C96021018D58233168FFFF01482025D7
+:10209000AFE40000920300072419000110790269DF
+:1020A0002406000310660279000000008E1900105B
+:1020B000241F000AA75F0140A759014292030004B0
+:1020C0008F86000024070001A7430144A740014672
+:1020D0009758010430D100023C050041A75801483F
+:1020E00000001821A747014A1220000330CA00044B
+:1020F0003C0501412403000151400005AF83000865
+:102100003C08001000A8282524030001AF83000824
+:10211000AF451000000000000000000000000000BB
+:10212000000000008F8B0008116000040000000018
+:102130008F4410000481FFFE000000008F6A000041
+:10214000920700043C0508008CA50444AF8A0004F3
+:10215000975F01043C0F08008DEF044030E300FF5F
+:1021600033F9FFFF0079C02100B868210000102179
+:1021700024E6000A30C8FFFF01B8482B01E27021B5
+:1021800001C96021311000073C010800AC2D044456
+:102190003C010800AC2C0440120000038F8D001895
+:1021A000250B00073168FFF8010D702131CC1FFFAE
+:1021B000AF8D001CAF8C0018AF4C00849744010415
+:1021C000034C80213084FFFF30880007110000039A
+:1021D000261B4000248900073124FFF88F8200204D
+:1021E0008F850028008220210085782B15E00002D1
+:1021F000AF82002400852023034488213405800019
+:10220000022510213C061000AF840020AF82003868
+:10221000AF440080AF4601780A0002858F8B00141E
+:102220008F5F017807E0FFFE30AA0200154000032F
+:10223000000542820000000D0005428231020003C9
+:102240000002710001C26821000D608001824821F6
+:102250000009288000B380218E0B0000116000026D
+:10226000000000000000000D8F6F000C05E001F37E
+:102270008F87003824190001AE1900008CE3000894
+:10228000A20000078F78000400181C02306600FFCF
+:1022900024D10005001130822CC4004114800002BA
+:1022A000A20300040000000D8F6B00043C0EFFFF32
+:1022B00000E028213164FFFF248F000B000F4082D3
+:1022C00000081080004748218D2D000026040014CE
+:1022D000A60B000801AE60240E000580AD2C0000A6
+:1022E0008F5F01083C0A100003EA382410E001A3C4
+:1022F00000000000974601049203000724D1FFEC80
+:10230000346500023224FFFFA2050007960600088C
+:102310002CC7001354E0000592030007920A00073F
+:10232000355F0001A21F000792030007240B000184
+:10233000106B01BA24090003106901CD8F880038A1
+:1023400030CFFFFF25E400020004C883333F00FFC5
+:10235000001F2880A219000500A858218D780000D0
+:10236000975101043C03FFFF030360243222FFFF67
+:10237000004F702325CDFFFE018D4825AD6900007B
+:10238000920600053C02FFF6344EFFFF30CA00FF04
+:10239000000A388000F02021909900143C1FFF7F34
+:1023A00037E7FFFF3323000F0066782131F800FF85
+:1023B0000018288000B088218E2D002000A8602100
+:1023C000A20F000601AE4824AE0D000CAD89000C32
+:1023D000920B00068E04000C0127F824000B50809D
+:1023E0000150C821972600260148C02100874024BB
+:1023F000AF260024AE08000CAF3F0020AF0600104F
+:102400008F860000240C001024090002A74C014014
+:10241000A7400142A7400144A7490146974B010448
+:102420002407000130C80002256AFFFEA74A0148C0
+:102430003C050009A747014A1100000300001821CC
+:102440003C0501092403000130CD000451A0000522
+:10245000AF8300083C06001000A6282524030001D5
+:10246000AF830008AF45100000000000000000002E
+:102470000000000000000000921800042711000274
+:10248000322F0007000F1023304E0007AE0E001051
+:102490008F90000812000004000000008F4310001D
+:1024A0000461FFFE000000008F7800008F8F00188D
+:1024B0003C1008008E100444AF98000497510104AA
+:1024C00025E6001030CA1FFF3222FFFFAF8F001C2D
+:1024D000AF8A0018AF4A00842449FFFE3C0B080075
+:1024E0008D6B0440974E010401206821000967C3E9
+:1024F000020D282131C9FFFF00AD402B016C3821AE
+:1025000000E82021034AF821313900073C01080086
+:10251000AC2504443C010800AC2404401320000313
+:1025200027FB4000252300073069FFF88F9F00201C
+:102530008F840028013F382100E4C82B17200002B7
+:10254000AF9F002400E43823034720213405800096
+:10255000008510213C061000AF870020AF820038B4
+:10256000AF470080AF4601780A0002858F8B0014C8
+:10257000975801041300FDC23C1040008F430178BE
+:102580000460FFFE30B94000132000033C04000843
+:102590000000000D3C040008AF440140240808007E
+:1025A000AF4801788F8B0000974A0104317F00010A
+:1025B00013E000E93146FFFF24D0FFFE240C0002A7
+:1025C000A74C0146A75001488F8F00182405000D25
+:1025D000A745014A8F71000025E2000830491FFF1E
+:1025E0000349702130CD0007AF910004AF8F001C6C
+:1025F000AF89001800C03821AF49008411A0000342
+:1026000025DB400024C6000730C7FFF88F98002064
+:102610008F84002800F8302100C4382B14E0000219
+:10262000AF98002400C430238F8A00140346582139
+:10263000340880000168F821255900013C0310008E
+:102640003C104000AF860020AF9F0038AF460080AE
+:10265000AF430178AF990014AF5001380A000190E0
+:10266000000000008F690000974401043127FFFF3C
+:102670003088FFFF8F4F017805E0FFFE30FF000735
+:10268000001F18233078000724E6FFFE2419000AF3
+:10269000A7590140A7580142A7460144A740014657
+:1026A000A74801488F42010830510020162000023F
+:1026B000240300092403000130AA0002A743014AB1
+:1026C0003C04004111400003000018213C0401417A
+:1026D0002403000130AB000451600005AF83000803
+:1026E0003C0500100085202524030001AF8300086D
+:1026F000AF441000000000000000000000000000D7
+:10270000000000008F90000812000004000000008C
+:102710008F4C10000581FFFE000000008F78000044
+:10272000276200088F8D003CAF9800049446000893
+:102730009451000A944F000C30CEFFFF001124008A
+:1027400031E9FFFF11CD00A2008920253C030800DC
+:102750008C6304443C1808008F18044000E85021A2
+:10276000255FFFFE007F78210000102101FF302B44
+:1027700003028821022648213C010800AC2F0444B2
+:102780003C010800AC29044024EB00083162FFFF43
+:102790003047000710E000038F8500182450000721
+:1027A0003202FFF83106FFFF30C8000700457021F4
+:1027B00031CD1FFF034D6021AF85001CAF8D001888
+:1027C000259B4000AF4D0084110000038F8F002037
+:1027D00024C400073086FFF88F84002800CF28210A
+:1027E00000A4482B15200002AF8F002400A428234A
+:1027F000AF850020AF4500803C1108008E310434C5
+:102800000345C0213402800003023021122000055C
+:10281000AF860038938300172419000E1079000D3D
+:10282000241F043F3C0A1000AF4A01788F8B00142C
+:10283000256700010A0001DDAF8700140E0005A620
+:102840003C1040008F8B0014256700010A0001DE58
+:10285000AF8700143C0A1000A75F0148AF4A017817
+:102860000A0004B48F8B0014240E0F0011EE003DFB
+:1028700030D10020162000022403000924030001A7
+:102880000A000208A743014A0A0001FBA7400146CB
+:1028900094E5000894E2000A94EB000C8F86003C5B
+:1028A0000002FC00316AFFFF30B9FFFF132600373A
+:1028B00003EA20253C0508008CA504443C1F0800C1
+:1028C0008FFF04400000502100A8382100E8302B81
+:1028D00003EAC8210326C0213C010800AC270444B8
+:1028E0003C010800AC3804400A0002698F8D0018D2
+:1028F0003C1908008F39047C3C0308008C630454A5
+:102900003C0608008CC604783C0F08008DEF04508C
+:10291000032838210068682100E8C02B00C4882102
+:1029200001A8402B01E470210238582101C8602120
+:102930003C010800AC2D04543C010800AC2C0450B0
+:102940003C010800AC27047C3C010800AC2B047857
+:102950000A0002698F8D0018A74001460A00041B77
+:102960008F8F001830D000201600FFC52403000D03
+:10297000240300050A000208A743014A97590104ED
+:102980002738FFF00A00036B3304FFFF8F8C0040F1
+:10299000148CFFC8000080213C1108008E31046CAB
+:1029A0003C0408008C8404680228702101C8782B3C
+:1029B00000904021010F68213C010800AC2E046CFE
+:1029C0003C010800AC2D04680A0002698F8D0018D4
+:1029D0008F9900401499FF5D000060213C050800BC
+:1029E0008CA5046C3C1008008E10046800E82021BF
+:1029F000248EFFFE00AEF82103EE582B020C50216E
+:102A0000014B18213C010800AC3F046C3C0108005C
+:102A1000AC2304680A00048B24EB00088F8800387C
+:102A20003C02FFFF8D0E000C01C2682401A460254A
+:102A3000AD0C000C0A00037930CFFFFF0A0003A998
+:102A4000AE000000974B0104920400048E2A000C93
+:102A500001644021251FFFF20147182433F9FFFFCD
+:102A60000079C025AE38000C0A0002D48E1900107F
+:102A70003C03FFFF8D1100100223282400A47825B9
+:102A8000AD0F00100A00037930CFFFFF9745010416
+:102A9000920600048E2F001000A610212449FFEE9C
+:102AA00001E76824312EFFFF01AE6025AE2C001037
+:102AB0000A0002D48E1900108E06000CAE00000031
+:102AC0000003C080031088210A0002A6AE26002061
+:102AD0001460000D3050FFFF3C04FFFF00446024F1
+:102AE00001846826000D582B000C502B014B10243C
+:102AF00010400002000000000000000D8CA3000048
+:102B00000A00023E006410253A11FFFF0011782BE5
+:102B10000010702B01CF2024108000020000000064
+:102B20000000000D8CB800000A00023E3702FFFFD3
+:102B30003084FFFF30A5FFFF108000070000182140
+:102B4000308200011040000200042042006518217C
+:102B50001480FFFB0005284003E0000800601021FE
+:102B600010C00007000000008CA2000024C6FFFF78
+:102B700024A50004AC82000014C0FFFB24840004E0
+:102B800003E000080000000010A0000824A3FFFFDD
+:102B9000AC86000000000000000000002402FFFFDF
+:102BA0002463FFFF1462FFFA2484000403E000089A
+:102BB00000000000308EFFFF30D8FFFF00057C00D2
+:102BC00001F8602539CDFFFF01AC5021014C582B95
+:102BD000014B4821000944023127FFFF00E8302162
+:102BE0000006240230C5FFFF00A418213862FFFF51
+:102BF00003E000083042FFFF3C0C08008D8C048489
+:102C0000240BFF8027BDFFD001845021014B4824B5
+:102C1000AF4900203C0808008D080484AFB20020B2
+:102C2000AFB00018AFBF0028AFB30024AFB1001C95
+:102C3000936600040104382130E4007F009A1021DB
+:102C40003C0300080043902130C500200360802130
+:102C50003C080111277B000814A0000226460070E2
+:102C60002646006C9213000497510104920F000451
+:102C70003267000F322EFFFF31ED004001C72823DD
+:102C800011A0000500004821925900BC333800040F
+:102C90001700009000000000924300BC307F000449
+:102CA00013E0000F0000000010A0000D0000000065
+:102CB000960E0002240AFF8000A7602125CDFFFEAA
+:102CC000A74D1016920B0004014B2024308200FF08
+:102CD00010400085010C40253C0F0400010F4025E9
+:102CE0008F5301780660FFFE2404000AA7440140C8
+:102CF000960D00022404000931AC0007000C582393
+:102D0000316A0007A74A0142960200022443FFFEEF
+:102D1000A7430144A7400146975F0104A75F01480C
+:102D20008F590108333800205300000124040001AA
+:102D3000920F000431EE001015C000023483001021
+:102D400000801821A743014A000000000000000095
+:102D50000000000000000000AF481000000000006C
+:102D60000000000000000000000000008F51100073
+:102D70000621FFFE3113FFFF126000030000000078
+:102D80008F481018ACC8000096030006307FFFFF84
+:102D900027F900020019988200138880023B302135
+:102DA0008CD800001520005700183402920300044C
+:102DB0002405FF8000A3F82433F100FF1220002C2B
+:102DC00000000000924700BC30F2000212400028D0
+:102DD00000000000974B100C2562FFFEA742101662
+:102DE000000000003C0A040035490030AF491000E3
+:102DF00000000000000000000000000000000000D3
+:102E00008F4C10000581FFFE000000009749100C58
+:102E10008F51101C00C020213127FFFF24F2003009
+:102E2000001218820003288000BBF8213226FFFF21
+:102E3000AFF100000E00059500112C020013C880B0
+:102E4000033B98218E78000000027400AFB8001098
+:102E50008FA80010310FFFFFAFAF00108FA400103C
+:102E600001C46825AFAD00108FA60010AE6600004B
+:102E700097730008976D000A9766000C8F8A003CD4
+:102E8000000D5C0030CCFFFF3262FFFF104A0036BD
+:102E9000016C2025960600023C10100024D3000887
+:102EA0000E0001393264FFFF974C01040E00014708
+:102EB0003184FFFFAF5001788FBF00288FB300240B
+:102EC0008FB200208FB1001C8FB0001803E0000803
+:102ED00027BD003010A0FF700000000024A5FFFCFB
+:102EE0000A0005CE240900048CD10000AF5110184F
+:102EF0008F5301780660FF7A2404000A0A0005E374
+:102F00000000000000A7C8218F8800388F4E101CD9
+:102F10000019C0820018788001E82021AC8E0000E2
+:102F2000000E2C0200C020210E00059531C6FFFFC7
+:102F3000023B28218CAD00000002540000403021EB
+:102F4000AFAD00108FAC0010318BFFFFAFAB0010A6
+:102F50008FA2001001424825AFA900108FA70010D2
+:102F60000A000613ACA700008F8F0040148FFFC922
+:102F70000000000097420104960B00023C05080087
+:102F80008CA5046C3049FFFF316AFFFF3C1108003B
+:102F90008E310468012A382124F2FFFE00B240215C
+:102FA0000012FFC30112C82B023FC02103192021C8
+:102FB0003C010800AC28046C3C010800AC24046807
+:102FC0000A00064D0000000000A4102B104000096C
+:102FD000240300010005284000A4102B04A00003D6
+:102FE000000318405440FFFC000528401060000713
+:102FF000000000000085302B14C0000200031842BE
+:10300000008520231460FFFB0005284203E0000830
+:10301000008010218F85002C27BDFFE80005302798
+:103020002CC300012CA400020083102510400003D3
+:10303000AFBF00102405007FAF85002C00052827B6
+:1030400030A5FFFF0E000574240426F58F830030A1
+:10305000240402BD004030210083382B10E0000919
+:1030600024050001000420400083102B048000038D
+:10307000000528405440FFFC0004204010A0000838
+:1030800000C350210064402B1500000200052842B7
+:103090000064182314A0FFFB0004204200C3502149
+:1030A0008FBF0010000A4C02312200FF27BD00181C
+:0C30B000AF8A002C03E00008AF8900305C
+:0430BC000A00002ADC
+:1030C00000000000000000000000000D7478703562
+:1030D0002E302E306A330000050000000000000A88
+:1030E000000001360000EA6000000000000000005F
+:1030F00000000000000000000000000000000000D0
+:1031000000000000000000000000000000000000BF
+:103110000000000000000000000000000000001699
+:10312000000000000000000000000000000000009F
+:10313000000000000000000000000000000000008F
+:10314000000000000000000000000000000000007F
+:10315000000000000000138800000000000005DCF3
+:10316000000000000000000010000003000000004C
+:103170000000000D0000000D3C02080024423B60EE
+:103180003C03080024633D14AC4000000043202BA6
+:103190001480FFFD244200043C1D080037BD7FFC65
+:1031A00003A0F0213C100800261000A83C1C0800D9
+:1031B000279C3B600E0002BA000000000000000DDA
+:1031C0008F8300383C088000350700708CE50000D4
+:1031D000008330253C02900000C22025AF850030DE
+:1031E000AF4400208F4900200520FFFE3C038000F3
+:1031F000346200708C4500008F8600303C19080056
+:103200008F39007C3C0E08008DCE007800A620236C
+:1032100003245821000078210164682B01CF60212C
+:10322000018D50213C010800AC2B007C3C010800C2
+:10323000AC2A007803E00008000000000A0000410A
+:10324000240400018F8400383C05800034A2000172
+:103250000082182503E00008AF43002003E00008C7
+:10326000000010213084FFFF30A5FFFF1080000711
+:1032700000001821308200011040000200042042AA
+:10328000006518211480FFFB0005284003E00008BA
+:103290000060102110C00007000000008CA2000098
+:1032A00024C6FFFF24A50004AC82000014C0FFFB6D
+:1032B0002484000403E000080000000010A00008BF
+:1032C00024A3FFFFAC860000000000000000000007
+:1032D0002402FFFF2463FFFF1462FFFA248400042A
+:1032E00003E0000800000000308AFFFF93A80013ED
+:1032F000A74A014497490E1630C600FF3C02100051
+:10330000A7490146AF450148A3460152A748015AC3
+:10331000AF4701608FA400188FA30014A744015881
+:10332000AF43015403E00008AF42017803E0000816
+:10333000000000003C038000346200708C490000F3
+:103340008F8800002484000727BDFFF83084FFF831
+:10335000AF890030974D008A31ACFFFFAFAC000061
+:103360008FAB0000016850232547FFFF30E61FFFA9
+:1033700000C4282B14A0FFF73C0C8000358B007094
+:103380008D6A00003C0708008CE700843C060800BA
+:103390008CC6008000081082014918230002788042
+:1033A00000E370210000202101C3C82B00C4C0210C
+:1033B00001FA4021031948212502400027BD0008D9
+:1033C0003C010800AC2E00843C010800AC290080C0
+:1033D00003E00008000000008F8200002486000740
+:1033E00030C5FFF800A2182130641FFF03E0000879
+:1033F000AF8400008F8700388F8A004027BDFFB858
+:103400008F860044AFB60040AFBF0044AFB5003C6C
+:10341000AFB40038AFB30034AFB20030AFB1002C5E
+:10342000AFB000288F4501048D4900ACAF47008044
+:103430008CC8002000A938230000B021AF480E102E
+:103440008F440E1000004821AF440E148CC200249B
+:10345000AF420E188F430E18AF430E1C10E001252B
+:103460002D230001936B0008116000D400000000C0
+:10347000976E001031CDFFFF00ED602B158000CF5F
+:103480000000000097700010320FFFFFAF4F0E00DA
+:103490008F520000325100081220FFFD0000000092
+:1034A00097540E088F460E043285FFFF30B300019B
+:1034B00012600132000000000000000D30B8A04092
+:1034C00024150040131500C030A9A0001120012DC3
+:1034D00000000000937F000813E0000800000000D7
+:1034E00097630010306BFFFF00CB402B11000003EF
+:1034F00030AC00401180012300000000A785003C93
+:10350000AF8600349366000800E02821AFA70020B2
+:1035100014C0012427B30020AF60000C9782003C48
+:103520003047400014E00002240300162403000E7C
+:1035300024194007A363000AAF790014938A003E60
+:103540008F740014315800070018AA400295902586
+:10355000AF7200149784003C8F70001430910010FB
+:1035600002117825AF6F0014978E003C31CD000812
+:1035700011A00147000028218F6700143C021000B1
+:103580003C0C810000E22825AF65001497460E0A26
+:103590002408000E3405FFFC30C3FFFF006C5825E3
+:1035A000AF6B0004A3680002937F000A27E90004C0
+:1035B000A369000A9786003C9363000A30CC1F0081
+:1035C000000C598301634021251F0028A37F0009B7
+:1035D00097490E0CA769001093790009272A000269
+:1035E000315800070018A82332B10007A371000B5F
+:1035F00093740009976400108F910034978F003CFA
+:10360000329200FF024480210205702131ED00401A
+:1036100011A0000531C4FFFF0091282B3C1280004F
+:1036200010A000140000A0210224382B14E0011B7C
+:103630008FA500208F4D0E14AF4D0E108F420E1C23
+:10364000AF420E18AF440E008F4F000031EE00085D
+:1036500011C0FFFD0000000097540E080080882173
+:1036600000009021A794003C8F500E042414000108
+:10367000AF900034976400103095FFFF8E68000013
+:103680000111F82317E00009AE7F00008F650014D8
+:103690008F8B004434A60040AF6600148F4C0E1090
+:1036A000AD6C00208F430E18AD63002493670008B3
+:1036B00014E000D2000000000E00009E2404001060
+:1036C0008F8900483C08320000402821312600FF45
+:1036D0000006FC0003E8502525390001AF99004899
+:1036E000AC4A0000937800099370000A330400FF8D
+:1036F00000047400320F00FF01CF6825AC4D0004B8
+:103700008F820048064000EAACA20008ACA0000C82
+:103710009783003C306B00081560000226280006E5
+:1037200026280002974E0E148F450E1C8F6700044A
+:10373000936D000231C4FFFF31A200FFAFA2001061
+:103740008F6C0014AFA800180E00008BAFAC0014F3
+:10375000240400100E0000C7000000008E7200005C
+:1037600016400005000000008F6400142405FFBF10
+:1037700000859824AF7300148F79000C033538212D
+:10378000AF67000C9375000816A000080000000049
+:1037900012800006000000008F7F00143C0BEFFF3A
+:1037A0003568FFFE03E84824AF690014A3740008DD
+:1037B0008FA500200A00024602202021AF470E00FC
+:1037C0000A0000F5000000008F5901780720FFFE75
+:1037D000241F08008F840000AF5F0178974B008A98
+:1037E000316AFFFF014448232528FFFF31021FFFF4
+:1037F0002C4300081460FFF9000000008F8E004881
+:103800008F8D003800C048210344202125C60001C7
+:10381000240C0F00AF86004800E9382324864000BE
+:1038200031CA00FF11AC0005240800019391003E4D
+:103830003230000700107A4035E80001000AAC0081
+:103840003C18010002B8A025AC9440008F930048BA
+:1038500030B2003630A40008ACD3000410800097CA
+:1038600001123025974E0E0A8F8D00003C02810018
+:1038700031CCFFFF25AB0008018240253C0310003E
+:1038800031651FFF25390006241F000EAF48016077
+:1038900000C33025A75F015AAF850000A759015822
+:1038A00014E0000A8F93003824120F0052720002B5
+:1038B0002416000134C600408F580E108F94004427
+:1038C000AE9800208F550E18AE9500248F450E142B
+:1038D000AF4501448F590E1CAF590148A34A01520C
+:1038E0003C0A1000AF460154AF4A017814E0FEDDF7
+:1038F0002D2300010076A025128000178FBF004401
+:103900008F84003824160F001096008400000000F9
+:103910008F45017804A0FFFE24150F001095006E5E
+:10392000000000008F470E14240202403C1F1000CC
+:10393000AF4701448F440E1CAF440148A3400152DD
+:10394000A740015AAF400160A7400158AF4201545F
+:10395000AF5F01788FBF00448FB600408FB5003C49
+:103960008FB400388FB300348FB200308FB1002C89
+:103970008FB0002803E0000827BD004814C0FED027
+:1039800030B8A0408F420E148F84004400004821BC
+:10399000AC8200208F510E1CAC9100240A00020E54
+:1039A0002D2300018F910034978A003C3C12800047
+:1039B0000220A821315800401700FF300000A0214C
+:1039C000976900108F9200343139FFFF13320035B0
+:1039D00000002021008048211480FEA000A0382192
+:1039E0008F420E148F840044AC8200208F510E1C35
+:1039F000AC9100240A00020E2D230001936A0009F5
+:103A00009378000B315000FF330F00FF020F70213D
+:103A100025C2000A3050FFFF0E00009E0200202148
+:103A20008F8600483C1F410024CD0001AF8D004827
+:103A3000936C000930C600FF00064400318300FF8C
+:103A4000246B0002010B4825013FC825AC5900003A
+:103A50008F67000C97440E1400F22825AC45000433
+:103A60008F450E1C8F670004936A00023084FFFFAD
+:103A7000315800FFAFB800108F6F0014AFB10018BD
+:103A80000E00008BAFAF00140A0001A60200202137
+:103A9000AF6000040A00013EA36000020A00024673
+:103AA00000002021000090210A0001702414000170
+:103AB0003C1280000A000195ACB2000C8F9100000E
+:103AC00025240002A744015826300008320F1FFFAA
+:103AD0000A0001F9AF8F0000AF40014C1120002C0B
+:103AE000000000008F590E10AF5901448F430E188B
+:103AF000240200403C1F1000AF430148A340015284
+:103B0000A740015AAF400160A7400158AF4201549D
+:103B1000AF5F01780A0002278FBF00441120000622
+:103B20000000000097460E0830CC004015800002CF
+:103B3000000000000000000D8F4D017805A0FFFE81
+:103B40000000000097530E103C120500240E2000C8
+:103B5000326AFFFF0152C025AF58014C8F4F0E143F
+:103B60003C021000AF4F01448F500E1CAF50014873
+:103B7000A34001528F840038A740015AAF40016032
+:103B8000A7400158AF4E01540A000215AF42017818
+:103B90008F490E14AF4901448F430E1C0A00028E58
+:103BA000240200403C0E20FF27BDFFE03C1A8000AD
+:103BB0003C0F800835CDFFFDAFBF001CAFB2001831
+:103BC000AFB10014AFB00010AF8F0040AF4D0E008A
+:103BD00000000000000000000000000000000000E5
+:103BE000000000003C0C00FF358BFFFDAF4B0E00CA
+:103BF0003C0660048CC95000240AFF7F3C11600021
+:103C0000012A40243507380CACC750008E240438F4
+:103C100024050009AF4500083083FFFF38622F718B
+:103C20002450C0B3AF8000480E000068AF80000091
+:103C300052000001AE20442C0E0004353C118000DF
+:103C40000E000EA8363000708F8A00403C1208002B
+:103C500026523BC8020088218E0800008F5F0000BA
+:103C60003BF900013338000113000017AF88003022
+:103C7000022048218D2700003C0F08008DEF006CCA
+:103C80003C0C08008D8C006800E8C02301F8282156
+:103C90000000682100B8302B018D582101664021B9
+:103CA0003C010800AC25006C3C010800AC28006811
+:103CB0008F44000038830001306200011440FFEDA2
+:103CC00000E04021AF8700308E0C00003C0508006A
+:103CD0008CA5006C3C0408008C84006801883023AB
+:103CE00000A638210000102100E6402B0082182198
+:103CF0000068F8213C010800AC27006C3C0108007A
+:103D0000AC3F00688F49010025590088AF990044F5
+:103D1000AF890038AF4900208E070000AF87003020
+:103D20008F4D017805A0FFFE000000008E06000008
+:103D30003C0B08008D6B00743C0408008C84007000
+:103D400000C728230165F8210000102103E5402B5E
+:103D50000082382100E8C821240908003C0108003D
+:103D6000AC3F00743C010800AC390070AF490178E9
+:103D700093580108A398003E938F003E31EE000156
+:103D800015C000158F830038240E0D00106E001929
+:103D9000240F0F00106F001D00000000915900005B
+:103DA00024180050332900FF113800043C1F400044
+:103DB000AF5F01380A0002E7000000000E0008EEC5
+:103DC000000000008F8A00403C1F4000AF5F0138B8
+:103DD0000A0002E700000000938D003E31AC0006AF
+:103DE000000C51000E0000CE0152D8210A000343FE
+:103DF0008F8A00403C1B0800277B3C480E0000CE09
+:103E0000000000000A0003438F8A00403C1B0800AA
+:103E1000277B3C680E0000CE000000000A00034330
+:103E20008F8A004090AA00018FAB00108CAC00106C
+:103E30003C0300FF8D680004AD6C00208CAD0014C5
+:103E400000E060213462FFFFAD6D00248CA70018F4
+:103E50003C09FF000109C024AD6700288CAE001C9E
+:103E60000182C82403197825AD6F0004AD6E002CC3
+:103E70008CAD0008314A00FFAD6D001C94A9000212
+:103E80003128FFFFAD68001090A70000A560000278
+:103E9000A1600004A167000090A30002306200FF4F
+:103EA0000002198210600005240500011065000E53
+:103EB0000000000003E00008A16A00018CD800287F
+:103EC000354A0080AD7800188CCF0014AD6F001417
+:103ED0008CCE0030AD6E00088CC4002CA16A0001AD
+:103EE00003E00008AD64000C8CCD001CAD6D001823
+:103EF0008CC90014AD6900148CC80024AD6800089A
+:103F00008CC70020AD67000C8CC200148C83006449
+:103F10000043C82B13200007000000008CC20014CF
+:103F2000144CFFE400000000354A008003E0000864
+:103F3000A16A00018C8200640A000399000000005D
+:103F400090AA000027BDFFF88FA9001CA3AA0000BB
+:103F50008FAE00003C0FFF808FA8001835E2FFFFF6
+:103F60008CCD002C01C26024AFAC0000A120000465
+:103F700000E06021A7A000028FB800008D27000498
+:103F80000188182100A0582100C05021006D28266A
+:103F90003C06FF7F3C0F00FF2CAD000135EEFFFF1C
+:103FA00034D9FFFF3C02FF0003193024000D1DC06F
+:103FB000010EC82400E2C02400C37025031978252F
+:103FC000AD2E0000AD2F00048D450024AFAE0000E3
+:103FD000AD2500088D4D00202405FFFFAD2D000C00
+:103FE000956800023107FFFFAD27001091660018A9
+:103FF00030C200FF000219C2506000018D4500343C
+:10400000AD2500148D67000827BD0008AD27001CF2
+:104010008C8B00CCAD2C0028AD20002CAD2B0024C7
+:10402000AD20001803E00008AD20002027BDFFE010
+:10403000AFB20018AFB10014AFB00010AFBF001C9A
+:104040009098000000C088213C0D00FF330F007FD6
+:10405000A0CF0000908E000135ACFFFF3C0AFF00AE
+:10406000A0CE000194A6001EA22000048CAB001478
+:104070008E29000400A08021016C2824012A4024FC
+:104080000080902101052025A6260002AE24000410
+:1040900026050020262400080E00007624060002D3
+:1040A00092470000260500282624001400071E0061
+:1040B0000003160324060004044000032403FFFF4A
+:1040C000965900023323FFFF0E000076AE23001046
+:1040D000262400248FBF001C8FB200188FB100145B
+:1040E0008FB0001024050003000030210A0000807A
+:1040F00027BD002027BDFFD8AFB1001CAFB000180E
+:10410000AFBF002090A80000240200018FB0003C47
+:104110003103003F00808821106200148FAA00380C
+:10412000240B0005506B0016AFAA001000A0202140
+:1041300000C028210E0003DC02003021922400BCC4
+:10414000308300021060000326060030ACC000007F
+:1041500024C600048FBF00208FB1001C8FB0001850
+:1041600000C0102103E0000827BD002801403821CD
+:104170000E00035AAFB000100A0004200000000037
+:104180000E0003A1AFB000140A00042000000000DC
+:104190003C02000A034218213C04080024843CAC81
+:1041A0002405001A000030210A000080AF8300546B
+:1041B0003C038000346200708C48000000A058214D
+:1041C00000C04821308A00FFAF8800308F4401785A
+:1041D0000480FFFE3C0C8000358600708CC500001A
+:1041E0003C0308008C6300743C1808008F180070B2
+:1041F00000A82023006468210000C82101A4782BB6
+:104200000319702101CF60213C010800AC2D00741E
+:104210003C010800AC2C00708F480E14AF480144DC
+:10422000AF47014CA34A0152A74B015893460108DE
+:1042300030C5000854A0000135291000934B090037
+:1042400024070050316A00FF1147000700000000FA
+:104250008F450E1CAF450148AF4901543C09100081
+:1042600003E00008AF490178934D010831A8000828
+:104270001100001000000000934F010831EE001003
+:1042800051C00001352900083C04080090843D100D
+:10429000A34401508F4309A4AF4301488F4209A0B2
+:1042A000AF420144AF4901543C09100003E000084B
+:1042B000AF4901783C1908008F393CCC33380008ED
+:1042C0005700FFF1352900080A00047300000000C0
+:1042D00024070040AF470814AF4008108F4209443C
+:1042E0008F4309508F4409548F45095C8F46094C10
+:1042F000AF820064AF830050AF84004CAF85005C98
+:1043000003E00008AF8600609346010930C5007FD6
+:10431000000518C0000521400083102103E00008BB
+:10432000244200883C0A0800914A3CD13C0908001C
+:1043300095293CCA3C051100000A3C0025280002D2
+:1043400000E8302500C5182524820008AC83000051
+:1043500003E00008AC8000048F4A002C974E090847
+:104360003C0F000E034F382131CDFFFF000D41C03F
+:10437000AF48002C9743090894EC001A00804021B4
+:1043800024020001318BFFFFAC8B00008CE9001C84
+:1043900000A0582100C06021AC8900048CE40020FA
+:1043A000AD04000890E30019306300031062004080
+:1043B000000000002865000214A00073240600021B
+:1043C0001066004E0000000024180003107800570B
+:1043D000000000003C09080095293CC093450934C1
+:1043E000934609213C0E080095CE3CC630A200FF42
+:1043F0000002C88294E5002A30C400FF9787005865
+:104400000019C60000041C00312FFFFF0303102514
+:1044100001CF6821004DC82500A720213C0640009F
+:104420000326C02500044C00AD090004AD180000AF
+:10443000934F09203C03000625090014000F760065
+:1044400001C36825AD0D00088F42092C24E5000149
+:1044500030A67FFFAD02000C8F59093025020028DD
+:10446000A7860058AD1900108F440938AD04001418
+:10447000AD2B00048F580940AD380008934F093721
+:104480003C0D080091AD3CD0AD20001031EE00FF96
+:1044900001CC182100036700000D44000188582555
+:1044A0003567FFFFAD27000C03E00008AF4A002C82
+:1044B0003C09080095293CC03C05080094A53CCA6D
+:1044C0003C0F080095EF3CBC94E400243126FFFF2C
+:1044D00000A6702101CF682300041C0025A2FFF272
+:1044E0000062C82524180800AD19000CAD1800148E
+:1044F000AD0000100A0004C82508001894E6002446
+:1045000094E500283C09080095293CC000067C0081
+:104510000005740035ED810035C40800AD0D000CB8
+:10452000AD0400100A0004C8250800143C09080066
+:1045300095293CC03C02080094423CCA3C06080055
+:1045400094C63CBC94E400243125FFFF94F8002875
+:104550000045C8210326782300181C0000046C00C5
+:1045600025EEFFEE006EC82535A281002418080054
+:10457000AD02000CAD190010AD180018AD0000140C
+:104580000A0004C82508001C1460FF920000000007
+:1045900094E300243C09080095293CC00003140062
+:1045A00034590800AD19000C0A0004C82508001091
+:1045B00003E00008240201F427BDFFE8AFB00010BB
+:1045C000AFBF00140E000060008080212405004071
+:1045D000AF4508148F8300508F84004C8F85005C9A
+:1045E000007018210064102318400004AF830050AD
+:1045F000AF6300548F660054AF86004C1200000C6D
+:10460000000000008F440074936800813409FA00B0
+:104610002D07000710E0000500891021936C008130
+:10462000240B01F4018B500401441021AF62000CF3
+:104630008F4E095C01C5682319A000048FBF0014C8
+:104640008F4F095CAF8F005C8FBF00148FB00010DC
+:104650000A00006227BD00188F8400648F83005019
+:104660008F82004CAF640044AF63005003E0000849
+:10467000AF6200543C038000346200708C43000041
+:1046800027BDFFF8308700FF30A900FF30C800FFCA
+:10469000AF8300308F4401780480FFFE3C0280002D
+:1046A000345900708F380000A3A700033C070800AE
+:1046B0008CE700748FAC00003C0608008CC60070CC
+:1046C000030378233C0E7FFF00EFC82135CDFFFFA9
+:1046D00000005021018D282400CA1821000847C07D
+:1046E000032F202B00A810250064C021AFA20000DA
+:1046F0003C010800AC3900743C010800AC38007083
+:10470000934F010AA3A000023C0E80FFA3AF00015B
+:104710008FAC0000312B007F35CDFFFF018D482489
+:10472000000B5600012A4025240730002406FF8094
+:104730003C05100027BD0008AF48014CAF470154AD
+:10474000A7400158A346015203E00008AF45017895
+:1047500027BDFFE8AFBF0014AFB000108F65007435
+:104760003C068000309000FF00A620250E0000606F
+:10477000AF64007493630005346200080E000062A9
+:10478000A3620005020020218FBF00148FB000102B
+:1047900024050005240600010A00056E27BD001847
+:1047A00027BDFFE03C038000AFB00010AFBF001892
+:1047B000AFB10014346200708C470000309000FFED
+:1047C00030A800FFAF8700308F4401780480FFFEDF
+:1047D0003C188000371100708E2F00003C0D08003F
+:1047E0008DAD00743C0A08008D4A007001E770230B
+:1047F00001AE28210000582100AE302B014B48218A
+:10480000012638213C010800AC25007400008821F5
+:104810003C010800AC2700701100000F00000000F0
+:104820008F6200742619FFFF3208007F0002FE022B
+:1048300033E5007F15000006332200FF2407FF80C8
+:104840000207202624A3FFFF00838025320200FFF9
+:1048500000408021241110080E00006000000000BC
+:104860008F4908183125000414A0FFFD3218007F7D
+:10487000001878C00018714001CF682125AC00886D
+:10488000AF4C0818274A09808D4B0020AF4B0144DC
+:104890008D460024AF460148A35001500E0000622F
+:1048A000A7400158022010218FBF00188FB10014BB
+:1048B0008FB0001003E0000827BD002027BDFFE8EF
+:1048C000308400FFAFBF00100E0005B930A500FF17
+:1048D0008F8300508FBF0010344500402404FF90A8
+:1048E0003C02100027BD0018AF43014CA344015205
+:1048F000AF45015403E00008AF4201789343093EFD
+:10490000306200081040000D3C0901013528080AFA
+:10491000AC8800008F470074AC8700043C06080098
+:1049200090C63CD030C5001050A00006AC800008F6
+:104930008F6A0060AC8A00082484000C03E0000841
+:10494000008010210A0006202484000C27BDFFE807
+:10495000AFBF0014AFB000109346093F00A0502134
+:10496000000528800085382330C200FF240300069C
+:104970003C09080095293CC624E8FFD8240500041A
+:1049800010430037240600029750093C3C0F0204F4
+:1049900000063400320EFFFF01CF6825AC8D000009
+:1049A000934C093E318B002011600008000000008C
+:1049B000934309363C020103345F0300307900FF62
+:1049C000033FC02524050008AC9800049343093434
+:1049D000935909210005F882306200FF0002C0826D
+:1049E000332F00FF00186E00000F740001AE602529
+:1049F000018920253C09400000898025ACF0FFD8C2
+:104A0000934309378F4F09488F580940306200FFA0
+:104A1000004AC821033F702101F86023000E6F0097
+:104A200001A650253185FFFF001F5880014548250C
+:104A300001683821AD0900200E00006024F0002834
+:104A4000240400040E000062A364003F0200102151
+:104A50008FBF00148FB0001003E0000827BD0018BE
+:104A60000A0006332406001227BDFFD024090010D7
+:104A7000AFB60028AFB50024AFB40020AFB100142A
+:104A8000AFB000103C010800A0293CD0AFBF002C03
+:104A9000AFB3001CAFB2001897480908309500FF6B
+:104AA0003C02000E3107FFFF000731C0AF46002C6B
+:104AB000974409089344010B30B400FF034280215E
+:104AC000308300300000B021106001070000882111
+:104AD000240C00043C010800A02C3CD0934B093E60
+:104AE000000B5600000A2E0304A0014B000000003A
+:104AF000AF400048934F010B31EE002011C000067B
+:104B0000000000009358093E00189E000013960311
+:104B10000640016B000000009344010B308300400D
+:104B2000106000038F9300508F8200502453FFFFCA
+:104B30009347093E30E6000814C000022412000327
+:104B4000000090219619002C93580934934F09378F
+:104B5000A7990058330C00FF31EE00FF024E682188
+:104B6000000D5880016C5021015140213C0108008A
+:104B7000A4283CC69205001830A900FF010918219D
+:104B80003C010800A4233CC8921100181620000321
+:104B90002467000A0000000D2467000A30F0FFFFC0
+:104BA0003C010800A4233CCA3C010800A4203CC0EE
+:104BB0003C010800A4203CBC0E00009E0200202105
+:104BC0000E00049A004020218F4B002C974A0908C0
+:104BD0003C0C000E034C38213145FFFF000549C055
+:104BE000AF49002C9743090894F1001A0040402176
+:104BF000241F00013226FFFFAC4600008CE2001C9F
+:104C0000AD0200048CE40020AD04000890E300191C
+:104C100030630003107F00D6286D000215A0011C30
+:104C2000240E0002106E010E240F0003106F00E32B
+:104C3000000000003C09080095293CC0934E09344F
+:104C4000935109213C0A0800954A3CC631CD00FF2A
+:104C500094F9002A000D188297870058322C00FF23
+:104C600000032E00000C24003126FFFF3142FFFF1D
+:104C700000A4F8250046482103E978250327702180
+:104C80003C18400001F86825000E8C00AD0D0000B6
+:104C9000AD110004934C09203C03000625110014BB
+:104CA000000C2E0000A31025AD0200088F49092C2E
+:104CB00024E40001309F7FFFAD09000C8F460930CE
+:104CC00025090028A79F0058AD0600108F59093804
+:104CD00001203021AD190014AE3300048F58094073
+:104CE000AE380008934F09373C0C0800918C3CD03B
+:104CF000AE20001031EE00FF01D26821000D2F0020
+:104D0000000C1C0000A310253447FFFFAE27000C49
+:104D1000AF4B002C934B093E317300081260000D1D
+:104D20003C0F010135E7080AAD0700288F4B0074DE
+:104D3000AD2B00043C13080092733CD03268001085
+:104D400051000003AD2000088F780060AD380008E6
+:104D50002526000C12C0003800000000935F093FB8
+:104D6000241600062407000433F900FF133600D28E
+:104D7000240800029743093C3C0C02043064FFFF06
+:104D8000008C2825ACC500009342093E3049002024
+:104D90001120000800000000934B09363C1301036A
+:104DA000366E0300316D00FF01AE8825ACD10004E2
+:104DB000240700089349093493590921314BFFFF17
+:104DC000313F00FF001FB082333800FF001656004D
+:104DD00000187C00014F982500122880026B68257E
+:104DE0003C0E400000C5502301AE8825AD51FFD8D0
+:104DF000934309378F5F09488F490940306C00FFA2
+:104E000001921021000720820044C82103E9782381
+:104E10000019C7000008B4000316402531E7FFFF62
+:104E2000010730250E000060AD46FFF82412000493
+:104E30000E000062A372003F0E0000C70200202196
+:104E40003C12080092523CD0325000031200000F76
+:104E500002A020218F82005024470001AF8700501C
+:104E6000AF6700508F6800540107302318C000025C
+:104E700000E020218F640054AF6400548F4C007414
+:104E8000258401F4AF64000C02A0202102802821B7
+:104E9000A76000680E0005B93C1410008F8D00500B
+:104EA00034550006AF4D014C8F9100488FBF002C48
+:104EB0008FB6002826230001AF8300488FB3001C63
+:104EC000A35101528FB20018AF5501548FB1001495
+:104ED000AF5401788FB500248FB400208FB000103C
+:104EE00003E0000827BD00309358093E00189E00DB
+:104EF0000013960306420051241100029344092333
+:104F0000308300021060FEFB8F8600608F820050AD
+:104F100014C2FEF8000000000E0000600000000057
+:104F20009369003F24070016312800FF1107000C89
+:104F3000240500083C0C0800918C3CD0358B000106
+:104F40003C010800A02B3CD0936A003F314300FF96
+:104F500010650065240D000A106D005E2402000C2F
+:104F60000E000062000000000A00068E0000000033
+:104F70003C09080095293CC03C04080094843CCAC4
+:104F80003C1F080097FF3CBC94F800243123FFFF2E
+:104F90000083C821033F782300186C0025EEFFF240
+:104FA00001AE6025240A0800AD0C000CAD0A001407
+:104FB000AD0000100A0006E0250800183C090800B2
+:104FC00095293CC03C1F080097FF3CCA3C190800CB
+:104FD00097393CBC94EF00243124FFFF94EE002865
+:104FE00003E4C02103196823000F2C00000E5400B5
+:104FF00025ACFFEE014C882534A281002406080070
+:10500000AD02000CAD110010AD060018AD0000148B
+:105010000A0006E02508001C8F6E00848F4D0940B1
+:1050200011A0FEB3AF8E0050240F00143C01080005
+:10503000A02F3CD00A00068D000000003C010800B3
+:10504000A0313CD0935F093E2416000133F90020C3
+:105050001720FEA8241100080A00068E241100045F
+:1050600094E5002494F100283C09080095293CC0EF
+:1050700000051400001134003444810034C30800DA
+:10508000AD04000CAD0300100A0006E02508001472
+:105090001460FEE80000000094FF00243C090800B2
+:1050A00095293CC0001FCC0037380800AD18000C13
+:1050B0000A0006E0250800100A00072E2408001246
+:1050C0008F7F004CAF7F00548F7900540A00069701
+:1050D000AF790050A362003F0E00006200000000A4
+:1050E0000A00068E00000000240200140A000807CF
+:1050F000A362003F27BDFFE8308400FFAFBF001070
+:105100000E0005B930A500FF9378007E9379007FEB
+:10511000936E00809368007A332F00FF00186600BA
+:10512000000F6C0031CB00FF018D4825000B5200B1
+:105130008FBF0010012A3825310600FF344470006B
+:1051400000E628252402FF813C03100027BD00183B
+:10515000AF45014CAF440154A342015203E00008A3
+:10516000AF43017827BDFFD8AFB20018AFB100142C
+:10517000AFB00010AFBF0020AFB3001C93420109D5
+:10518000308600FF30B000FF000618C23204000273
+:105190003071000114800005305200FF9367000554
+:1051A00030E5000810A0000D30C80010024020219A
+:1051B0000E0005A502202821240400018FBF002035
+:1051C0008FB3001C8FB200188FB100148FB0001085
+:1051D0000080102103E0000827BD002815000032E0
+:1051E0000000000093430109000028213062007F85
+:1051F000000220C00002F94003E4982126790088CB
+:10520000033B98218E7800248E6F0008130F004610
+:10521000000000008F640084241800020004FD8256
+:1052200033F900031338007C00000000936600830C
+:10523000934A0109514600043205007C10A0006029
+:10524000000000003205007C14A000530240202121
+:1052500016200006320400018E7F00248F590104BD
+:1052600017F9FFD600002021320400011080000A47
+:10527000024020218F4209408F93006410530006A2
+:10528000000000000E00066B022028218F43094019
+:10529000AF630044024020210E00060002202821B6
+:1052A0000A000840240400013C0908008D2900641C
+:1052B000252600013C010800AC26006416000012FF
+:1052C000000000008F6D00843C0E00C001AE602421
+:1052D00015800005024020210E00080E0220282122
+:1052E0000A00084024040001240500040E00056E95
+:1052F00024060001024020210E00080E0220282171
+:105300000A000840240400010E00004124040001AA
+:10531000936B007D020B50250E000062A36A007D96
+:105320000A0008838F6D00848F6600748F48010423
+:105330008E67002400064E021507FFB63126007F57
+:10534000936B008326440001308A007F114600439E
+:10535000316300FF5464FFB08F6400842645000170
+:1053600030B1007F30A200FF1226000424050001A6
+:10537000004090210A00085624110001240FFF80EC
+:10538000024F702401CF9026324200FF004090214E
+:105390000A000856241100010E00066B0220282185
+:1053A000321800301300FFAA321000820240202180
+:1053B0000E0005A5022028210A000840240400014F
+:1053C0008F6E00743C0F80002405000301CF9025F0
+:1053D000AF72007493710083240600010E00056E05
+:1053E000322400FF0E00004124040001936D007D73
+:1053F000020D60250E000062A36C007D3C0B0800CE
+:105400008D6B0054257000013C010800AC30005445
+:105410000A000840240400018F6800743C098000E1
+:105420002405000401093825AF67007493630083E5
+:10543000240600010E00056E306400FF0E000041DE
+:10544000240400019362007D020298250E00006290
+:10545000A373007D0A00084024040001324D00803F
+:1054600039AC0080546CFF6C8F6400840A0008A97A
+:105470002645000127BDFFC83C0A0008AFBF003029
+:10548000AFB5002CAFB40028AFB30024AFB20020FA
+:10549000AFB1001CAFB00018034AD8212409004066
+:1054A000AF490814AF4008108F4209448F43095098
+:1054B0008F4609548F47095C8F48094C9344010873
+:1054C0009345010BAF820064308400FF30A500FFDC
+:1054D000AF830050AF86004CAF87005C0E00082AF7
+:1054E000AF880060144001748FBF0030A76000686F
+:1054F000934D0900240B00503C15080026B53C884C
+:1055000031AC00FF3C12080026523C98118B00037E
+:10551000000000000000A821000090219351010923
+:105520008F9F005024040010322E007F000E68C0B0
+:10553000000E6140018D282124B40088AF54081862
+:105540008F4901048F4A09A43C0B000E034BC02174
+:10555000012A10233C010800AC223CAC8F430958BF
+:105560003C010800A0243CD097470908007F302365
+:105570003C010800AC263CB030E8FFFF0008C9C081
+:105580003C010800AC3F3CD4AF59002C97420908BD
+:105590009710002C8EB10000930F0018037498210F
+:1055A000A7900058AF9300440220F80931F000FFA3
+:1055B000304E000215C001A9304F000111E0015D1D
+:1055C000000000009343093E3066000814C000024A
+:1055D000241400030000A0218F5809A42413000103
+:1055E0003C010800AC383CD8934F0934935109373B
+:1055F00031EC00FF322E00FF028E6821000D288062
+:1056000000AC5021015058213C010800A42B3CC89B
+:105610003C010800A42A3CC693490934312200FF0A
+:1056200002022021249000103C010800A4303CC458
+:10563000240700068F9F00503C010800AC273CCC9B
+:105640008F88005C8F59095800008021011F282392
+:1056500004A00151033F20230480014F00A4302BFC
+:1056600010C00151000000003C010800AC253CB016
+:105670008E4200000040F8090000000030430002A4
+:10568000146000F100408821304400015480001073
+:105690008E4200043C0908008D293CB43C0AC0003D
+:1056A000012A8025AF500E008F45000030AB000866
+:1056B0001160FFFD00000000974D0E08241000014E
+:1056C000A78D003C8F4C0E04AF8C00348E4200043A
+:1056D0000040F8090000000002228825322E000256
+:1056E00015C0016F000000003C09080095293CBC72
+:1056F0003C06080094C63CC83C04080094843CBEA8
+:105700003C1808008F183CB4012658213C0F0800B3
+:105710008DEF3CD83C1F080097FF3CD20164182154
+:105720008F4D09400309C821246E0002033F282140
+:1057300001F860213C010800A42B3CCAAF8D006435
+:105740003C010800AC2C3CD83C010800A4253CC01E
+:105750000E00009E31C4FFFF8F87004800402021CB
+:105760003C010800A0273CD18E42000824E800013B
+:10577000AF8800480040F809000000008F4B002C63
+:10578000974909083C0A000E034A38213124FFFFDB
+:10579000000419C08F8A0050AF43002C97430908BA
+:1057A00094E6001A0040402130DFFFFFAC5F0000AC
+:1057B0008CF9001CAC5900048CF80020AC5800088F
+:1057C00090EF001931E30003107300FB00000000AC
+:1057D0002862000214400117240500021065010927
+:1057E000240C0003106C00BC000000003C09080001
+:1057F00095293CC0935F0934934C09213C0D080066
+:1058000095AD3CC633F900FF94E5002A0019C0822B
+:10581000318F00FF978C005800181600000F74009D
+:105820003124FFFF004E382501A4302100E6F82581
+:1058300000ACC8213C03400003E3C02500194C0024
+:10584000AD180000AD090004934F09203C0E00067E
+:1058500025090014000F6E0001AE2825AD050008D3
+:105860008F46092C2582000130477FFFAD06000CD2
+:105870008F440930A787005825060028AD04001082
+:105880008F43093800C02021AD030014AD2A000465
+:105890008F5F0940AD3F0008935909373C0E08005F
+:1058A00091CE3CD0AD200010333800FF0314782196
+:1058B000000F6700000E6C00018D282534A2FFFF49
+:1058C000AD22000CAF4B002C9347093E30EA000894
+:1058D0005140000F8E58000C3C0301013469080A46
+:1058E000AD0900288F4A0074ACCA00043C0B0800C4
+:1058F000916B3CD03168001051000003ACC000082F
+:105900008F650060ACC5000824C4000C8E58000CE4
+:105910000300F809000000003C0F080095EF3CCAA6
+:105920003C02080094423CBE01E2702125C4000202
+:105930000E0000C73084FFFF3C0608008CC63CAC5C
+:105940003C0D08008DAD3CB400CD38233C0108006F
+:10595000AC273CAC14E00006000000003C19080035
+:105960008F393CCC372C00403C010800AC2C3CCC9F
+:10597000120000858F8B00448F480E108F900044DA
+:10598000AE0800208F5F0E18AE1F00243C100800E8
+:1059900096103CC00E00006000000000240500408E
+:1059A000AF4508148F8300508F89004C0070182178
+:1059B0000069502319400004AF830050AF630054C6
+:1059C0008F670054AF87004C1200000C00000000ED
+:1059D0008F440074936D0081340EFA002DA60007E9
+:1059E00010C00005008E182193780081240201F474
+:1059F0000302780401E41821AF63000C8F4C095CAA
+:105A00008F99005C0199202318800003000000009A
+:105A10008F50095CAF90005C0E0000620000000037
+:105A20008F8B00508E4800103C010800AC2B3CD4FA
+:105A30000100F809000000003C1F08008FFF3CAC8B
+:105A400017E0FEFC240700068F4500249742090852
+:105A50008F8A00648F9400503C0F001F9787005876
+:105A60008F8300548F93004C304DFFFF35EEFF8045
+:105A700000AE4824000D31C032320010AF46002481
+:105A8000A467002CAF490024AF6A0044AF740050F3
+:105A9000AF7300545640007E8EB80004322400409C
+:105AA000548000328EB100088EAC000C0180F809E1
+:105AB000000000008FBF00308FB5002C8FB400288D
+:105AC0008FB300248FB200208FB1001C8FB000185C
+:105AD00003E0000827BD00383C09080095293CC0B8
+:105AE0003C04080094843CCA3C1F080097FF3CBC5F
+:105AF00094F800243123FFFF94EF00280083C8218D
+:105B0000033F702300182C00000F640025CDFFEE2A
+:105B1000018D302534A2810024030800AD02000C61
+:105B2000AD060010AD030018AD0000140A0009CE48
+:105B30002508001C934701098F8800380007FE00E4
+:105B400003E8C825AF5900808F5809A08F5309A4D6
+:105B5000AFB80010AF580E148FB40010AF540E1031
+:105B6000AF530E1C0A000942AF530E180220F80969
+:105B7000000000008EAC000C0180F809000000005D
+:105B80000A000A7F8FBF0030A5600020A5730022A5
+:105B90000A000A34AD7300243C010800AC203CB07C
+:105BA0000A00096E8E4200003C010800AC243CB0A3
+:105BB0000A00096E8E4200003C09080095293CC08D
+:105BC0003C1F080097FF3CCA3C19080097393CBCB1
+:105BD00094EF00243124FFFF03E4C0210319702354
+:105BE000000F640025CDFFF2018D2825AC45000C87
+:105BF00024020800AD020014AD0000100A0009CE16
+:105C00002508001894E6002494E300283C090800C5
+:105C100095293CC0000624000003FC003499810053
+:105C200037F80800AD19000CAD1800100A0009CEB5
+:105C3000250800141460FEED0000000094EF00241D
+:105C40003C09080095293CC0000F740035CD0800C0
+:105C5000AD0D000C0A0009CE250800109352010971
+:105C6000000028210E000600324400FF8FBF0030E4
+:105C70008FB5002C8FB400288FB300248FB2002082
+:105C80008FB1001C8FB0001803E0000827BD00385A
+:105C90000300F809000000000A000A7932240040DD
+:105CA0001200FF69000000008F540E148F92004410
+:105CB000AE5400208F530E1C0A000A63AE5300241A
+:105CC0008F82001C008040213C0401009047008529
+:105CD00030E3002010600009000000003C070800CD
+:105CE0008CE73CD48F83001800E320230480000855
+:105CF0009389000414E300030100202103E000085D
+:105D0000008010213C04010003E000080080102105
+:105D10001120000B006738238F8C002024090034E9
+:105D2000918B00BC316A000251400001240900300F
+:105D300000E9682B15A0FFF10100202100E93823BC
+:105D40002419FFFC00B9C02400F9782400F8702B56
+:105D500015C0FFEA01E8202130C200030002182329
+:105D600014C00012306900030000302100A9702126
+:105D700001C6682100ED602B1180FFE03C040100AA
+:105D80002D2F00010006482B0105382101E93024A0
+:105D900014C0FFDA24E4FFFC2419FFFC00B9C0247E
+:105DA0000308202103E00008008010218F8B0020D1
+:105DB00024060004916A00BC314400041480FFEC06
+:105DC00000A970210A000B2D0000302127BDFFE83B
+:105DD000AFBF00108F460100934A01093C1F080025
+:105DE0008FFF00902407FF80314F00FF31E8007FD4
+:105DF0000008614003E6C821032CC02127090120C7
+:105E0000012770243C010800A02F3D10AF4E080C64
+:105E10003C0D08008DAD00903C04008034820003EE
+:105E200001A65821016C18212465012030AA0078B0
+:105E300001424025AF48081C3C1F08008FFF00901E
+:105E40008F88004003E6C021331900070307482468
+:105E5000033A7821AF49002825E909C0952E0002B0
+:105E60003C0D08008DAD008C3C0A08008D4A009066
+:105E700031CC3FFF01A61821000C5980006B28216E
+:105E800000A72024AF44002C952200023C1F0800EC
+:105E90008FFF008C9107008530593FFF03E6782182
+:105EA0000019C1800146702101F8682131CC007FC2
+:105EB00031AB007F019A2821017A50213C03000C6C
+:105EC0003C04000E00A328210144102130E60020EC
+:105ED00027470980AF82002CAF88001CAF890024BF
+:105EE000AF85002010C00006AF8700288D0200504B
+:105EF0008CA4010C0044302318C00077000000007F
+:105F0000910C0085240DFFDF018D3824A107008549
+:105F10008F8B001C8F8900248F8700288D65004C93
+:105F2000AF850018912F000D31EE002011C0001731
+:105F30000000000024090001A3890004AF80000CC8
+:105F40008CE400248F85000C240A0008AF80000830
+:105F5000AF8000103C010800A42A3CBE3C010800B0
+:105F6000A4203CD20E000B01000030218F850024BC
+:105F70008FBF0010AF82001490A8000D27BD00183D
+:105F80000008394203E0000830E20001913F0002BE
+:105F90002418000133F900FF0019218210980039FC
+:105FA000240800021088005B8F86002C8CE50024FA
+:105FB00014A0001B8F9F002091220000240A0005DE
+:105FC0003046003F10CA0047240400018F860008B5
+:105FD000A3840004AF860010AF86000C8CE400247C
+:105FE0008F85000C240A00083C010800A42A3CBE4E
+:105FF0003C010800A4203CD20E000B010000000070
+:106000008F8500248FBF0010AF82001490A8000D70
+:1060100027BD00180008394203E0000830E2000103
+:106020008CF800088CF900248FEE00C4A3800004D3
+:106030008CE40024AF8E000C8F85000C8F86000846
+:1060400003197823240A0008AF8F00103C010800D0
+:10605000A42A3CBE3C010800A4203CD20E000B0147
+:10606000000000008F8500248FBF0010AF82001455
+:1060700090A8000D27BD00180008394203E0000871
+:1060800030E20001912300003062003F10440027FD
+:106090008F8500208CE40024148000210000000083
+:1060A0008D2E00183C187FFF8F850020370FFFFFD3
+:1060B00001CF1824AF8300088F9F00088CA80084AC
+:1060C00003E8C82B1720000203E020218CA40084E1
+:1060D0000A000BBCAF8400088CA3010C0A000B9AC9
+:1060E000AF8300188D2C00188F8600083C0D7FFFB1
+:1060F0008F89002035A3FFFF018358242404000169
+:10610000AF8B0010AD2000CCA38400040A000BC8A4
+:10611000AF86000C8CCA00140A000BBCAF8A0008C2
+:106120008CA300C80A000BFFAF8300088F84002CEB
+:106130008CAC00648C8D0014018D582B1160000410
+:10614000000000008CA200640A000BFFAF82000870
+:106150008C8200140A000BFFAF8200088F85000CB0
+:1061600027BDFFE0AFBF0018AFB1001414A00007B7
+:10617000AFB000108F8600242402000590C40000F8
+:106180003083003F106200B68F8400208F9100089A
+:1061900000A080218F8C00283C0508008CA53CB015
+:1061A0008D8B000431663FFF00C5502B5540000128
+:1061B00000C02821938D000411A0007300B0F82BBB
+:1061C0008F98002024040034930F00BC31EE0002AD
+:1061D00051C000012404003000A4C82B172000D1B6
+:1061E0000000000000A4282300B0F82B3C010800A8
+:1061F000A4243CBC17E00068020020213C030800F6
+:106200008C633CAC0083102B5440000100801821AB
+:106210008F8800243C010800AC233CB400004821D6
+:106220009104000D30830020506000018F490E184A
+:106230008F8300140123382B10E000590000000068
+:106240003C0408008C843CB400895821006B502B1E
+:10625000114000560090602B0069302300C02021BF
+:106260003C010800AC263CB412000003241FFFFCD4
+:106270001090008A32270003009FC8243C010800C8
+:10628000AC393CB43C010800A4203CD28F84000C03
+:10629000120400078F830020AF9100080200202124
+:1062A0008C7100CCAF90000C26300001AC7000CC9B
+:1062B0003C0208008C423CB48F8A0010240700186E
+:1062C0000082202301422823AF84000C10800002AA
+:1062D000AF850010240700108F86001C3C010800C9
+:1062E000A0273CD02407004090CC0085318B00C013
+:1062F000116700408F8D001414A0001500002021AC
+:10630000934A01098F420974314500FF00022602B9
+:1063100024A300013090007F3071007F1230007A9A
+:106320002407FF80A0C300833C0908008D293CCCD2
+:106330008F880024240D0002352C00083C01080041
+:10634000A02D3D113C010800AC2C3CCC24040010D5
+:10635000910E000D31C6002010C0000500801821EC
+:10636000240800013C010800AC283CB4348300013F
+:106370008FBF00188FB100148FB000100060102183
+:1063800003E0000827BD00203C010800A4203CBC1D
+:1063900013E0FF9A020020210A000C5000A02021E7
+:1063A0003C0408008C843CB40090602B1180FFAE4C
+:1063B000000000003C0F080095EF3CBC01E4702198
+:1063C00001C6682B11A000072C8200043C1F60004E
+:1063D0008FF954043338003F1700FFE524030042CF
+:1063E0002C8200041040FFA0240300420A000CAEDF
+:1063F0008FBF0018152DFFC0000000008CDF007457
+:106400003C0380002405FF8003E3C825ACD9007459
+:1064100090D80085240E000424040010330F003FA0
+:1064200001E54025A0C800858F8800243C010800B4
+:10643000A02E3D11240300019106000D30C900205B
+:1064400015200003000000003C0308008C633CB4EE
+:106450003C010800AC233CAC0A000CA50000000085
+:106460008F8700108C88008400E8282B14A000027D
+:1064700000E088218C91008424090001A389000494
+:106480008F440E18022028210E000B01022030211B
+:10649000022080210A000C36AF8200140007182366
+:1064A000306600033C010800A4263CD212200005FF
+:1064B0008F8C0020918B00BC316A000415400015C0
+:1064C00024CD00043C0F080095EF3CD201E470217C
+:1064D00000AE302B50C0FF6E8F84000C2C85000561
+:1064E00014A0FFA324030042309800031700000209
+:1064F000009818232483FFFC3C010800AC233CB423
+:106500000A000C720000000000A758240A000C9A30
+:10651000016718263C010800A42D3CD20A000D0298
+:10652000000000003C010800AC203CB40A000CADA7
+:10653000240300428F830010146000070000102124
+:106540008F880024240500059106000030C400FF58
+:10655000108500030000000003E0000800000000B8
+:10656000910A0018314900FF000939C214E0FFFA0E
+:106570008F85001C3C04080094843CBC3C0308004C
+:106580008C633CD43C1908008F393CB43C0F0800A4
+:1065900095EF3CD20064C0218CAD005403197021EA
+:1065A00001CF6021018D58231960001D00000000FB
+:1065B000910E001C8F8C002C974B0E1031CD00FFDC
+:1065C0008D850004016D30238D88000030CEFFFFE3
+:1065D000000E510000AAC821000038210107202127
+:1065E000032A182B0083C021AD990004AD98000048
+:1065F000918F000A01CF6821A18D000A8F88002C9D
+:10660000974B0E12A50B0008950A0038254900018A
+:10661000A50900389107000D34E60008A106000D19
+:1066200003E000080000000027BDFFE0938700049E
+:106630008F8F00248FAD00143C0E7FFF8F89000CDC
+:1066400035C8FFFFAFBF001CAFB0001801A8182469
+:1066500091EA000D000717C03C1FBFFF00625825DC
+:106660002D2E00018F90001837F9FFFF3C1808000D
+:106670008F183CD43C0F080095EF3CCA0179682480
+:10668000000E47803C07EFFF3C05F0FF01A81825EE
+:106690003149002034E2FFFF34ACFFFF03105823E0
+:1066A00027A500102406000225EA00020062182433
+:1066B0000080802115200002000040218F480E1C20
+:1066C000A7AA0012056000372407000030FF00FF72
+:1066D000001FCF008F8B001C00793825AFA7001456
+:1066E000916F00853C08080091083CD13C18DFFF01
+:1066F00031EE00C0370AFFFF000E182B3C1F0800C8
+:1067000097FF3CC400EA6824A3A8001100031740C7
+:1067100001A248258FB90010AFA900143C0A080057
+:10672000914A3CD3A7BF00168FA80014032CC024A5
+:106730003C0B01003C0F0FFF030B182531470003F2
+:1067400035EEFFFF010C682400071600006EF824E8
+:106750003C09700001A2C82503E95825AFB900140F
+:10676000AFAB00100E000076A3A000158F8C0024A4
+:10677000260200089186000D30C40020108000061B
+:106780008FBF001C3C05080094A53CC024B0FFFF4F
+:106790003C010800A4303CC08FB0001803E00008A2
+:1067A00027BD00208F9800140118502B5540FFC7BB
+:1067B000240700010A000D8530FF00FF93820004CA
+:1067C00027BDFFE0AFBF00181040000F0080502130
+:1067D0008F880024240B00058F8900089107000092
+:1067E0008F8400200100282130E3003F8F86002C99
+:1067F000106B000800003821AFA900100E00040E35
+:10680000AFAA0014A38000048FBF001803E00008A3
+:1068100027BD00208D1900183C0F08008DEF3CB4F7
+:106820008F9800103C027FFF8D080014345FFFFF3B
+:10683000033F682401F8702101AE602301883821EC
+:10684000AFA900100E00040EAFAA00140A000DD369
+:10685000A38000048F8700243C05080094A53CD247
+:106860003C0208008C423CCC90E6000D0005240060
+:1068700030C300201060002C004440258F85001C90
+:1068800000006021240B000190A300850000482136
+:10689000240A00013C0F800035EE00708DC7000017
+:1068A000AF8700308F5801780700FFFE3C0380005F
+:1068B000347900708F3800003C0508008CA5007406
+:1068C0003C0D08008DAD00700307782300AF382120
+:1068D0000000102100EF302B01A22021008618219A
+:1068E0003C010800AC2700743C010800AC23007098
+:1068F000AF4B01483C1908008F393CD4A7490144EB
+:10690000A74A0146AF59014C3C0B0800916B3CD1A2
+:10691000A34B0152AF4801543C081000A74C01584A
+:1069200003E00008AF4801788F4B0E1C3C0A0800BA
+:106930008D4A3CB497490E16974D0E1401456021BF
+:10694000312AFFFF0A000DF631A9FFFF8F830024D3
+:106950009064000D308200201040002900000000EB
+:106960000000482100005021000040213C07800029
+:1069700034EB00708D670000AF8700308F4C0178DA
+:106980000580FFFE3C0D800035AC00708D8B000053
+:106990003C0508008CA500743C0408008C84007041
+:1069A0000167302300A678210000102101E6C82BE2
+:1069B0000082C021031970213C010800AC2F007433
+:1069C0003C010800AC2E0070AF4901483C0D0800A6
+:1069D0008DAD3CD4A748014424090040A74A014694
+:1069E0003C081000240AFF91AF4D014CA34A01520C
+:1069F000AF490154A740015803E00008AF480178AF
+:106A00008F490E1897460E1297450E1030CAFFFF99
+:106A10000A000E2C30A8FFFF8F83002427BDFFF84B
+:106A20009064000D308200201040003A0000000009
+:106A3000240B000100004821240A00013C088000CA
+:106A4000350700708CE30000AF8300308F4C017875
+:106A50000580FFFE3C0E80003C04080090843D1041
+:106A600035C700708CEC00003C0508008CA5007454
+:106A7000A3A400033C1908008F3900708FAD0000FB
+:106A80000183302300A63821000010210322782141
+:106A900000E6C02B01F8602101AE4025AFA8000040
+:106AA0003C010800AC2700743C010800AC2C0070CD
+:106AB0009346010A3C04080090843D11A3A0000203
+:106AC000A3A600018FA300003C0580FF3099007F42
+:106AD00034A2FFFF006278240019C60001F8702577
+:106AE000240D3000AF4E014C27BD0008AF4D0154BE
+:106AF000A7400158AF4B0148A7490144A74A0146A6
+:106B00003C091000240AFF80A34A015203E0000858
+:106B1000AF4901788F4B0E1897460E1297450E100D
+:106B200030CAFFFF0A000E6030A9FFFF8F85001CEE
+:106B30002402008090A40085308300C0106200050C
+:106B40008F8600208F8800088F87000CACC800C893
+:106B5000ACC700C403E00008000000003C0A0800C5
+:106B6000254A38903C0908002529395C3C08080072
+:106B700025082D103C07080024E73A703C06080061
+:106B800024C637003C05080024A534783C040800DE
+:106B9000248430A03C030800246337983C0208009A
+:106BA0002442356C3C010800AC2A3C903C010800B2
+:106BB000AC293C8C3C010800AC283C883C01080016
+:106BC000AC273C943C010800AC263CA43C010800E6
+:106BD000AC253C9C3C010800AC243C983C010800DE
+:106BE000AC233CA83C010800AC223CA003E0000818
+:046BF00000000000A1
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-mips-09-4.6.17.fw.ihex b/firmware/bnx2/bnx2-mips-09-4.6.17.fw.ihex
deleted file mode 100644
index 7667c66..0000000
--- a/firmware/bnx2/bnx2-mips-09-4.6.17.fw.ihex
+++ /dev/null
@@ -1,5816 +0,0 @@
-:10000000080000F80800000000004AC8000000C80E
-:1000100000000000000000000000000008004AC8C6
-:100020000000003000004B90080000800800000035
-:10003000000053A800004BC0080055400000008499
-:1000400000009F68080053A80000016C00009FECAE
-:10005000080031D808000000000079080000A1580D
-:100060000000000000000000000000000800790807
-:100070000000012400011A60080004880800040040
-:10008000000013A400011B84000000000000000019
-:1000900000000000080017A40000000400012F2841
-:1000A000080000980800000000003AFC00012F2C16
-:1000B00000000000000000000000000008003AFC02
-:0800C0000000003000016A2875
-:0800C8000A00003E00000000E8
-:1000D000000000000000000D636F6D342E362E31DD
-:1000E00036000000040610020000000000000003BB
-:1000F00000000014000000320000000300000000B7
-:1001000000000000000000000000000000000000EF
-:1001100000000010000001360000EA60000000014D
-:1001200000000000000000000000000000000008C7
-:1001300000000000000000000000000000000000BF
-:1001400000000000000000000000000000000000AF
-:10015000000000000000000000000000000000009F
-:10016000000000020000000000000000000000008D
-:10017000000000000000000000000000000000007F
-:10018000000000000000000000000010000000005F
-:10019000000000000000000000000000000000005F
-:1001A000000000000000000000000000000000004F
-:1001B000000000000000000000000000000000003F
-:1001C0000000000010000003000000000000000D0F
-:1001D0000000000D3C02080024424B203C030800B4
-:1001E00024634C18AC4000000043202B1480FFFD1A
-:1001F000244200043C1D080037BD9FFC03A0F021F1
-:100200003C100800261000F83C1C0800279C4B20DE
-:100210000E000273000000000000000D27BDFFE883
-:100220003C028000AFB00010AFBF0014345001009A
-:10023000920200091040001A240300013C02080049
-:100240008C42002010400016000018210E000D7195
-:1002500000000000960300083C06080094C64BFE10
-:100260008E0400188F82002C9605000C00031C00E1
-:1002700000661825AC440000AC45000424040001CD
-:10028000AC400008AC40000CAC400010AC40001486
-:10029000AC4000180E000D98AC43001C0000182163
-:1002A0008FBF00148FB000100060102103E0000821
-:1002B00027BD001827BDFFE8AFBF00103C0280003B
-:1002C0009442010830437000240220001062000AAA
-:1002D00028642001548000128FBF001024024000C7
-:1002E00010620008240260001062000A8FBF001034
-:1002F0000A000097000010218FBF00100A0000556F
-:1003000027BD00180E000433000000000A0000960C
-:100310008FBF00100E000C81000000008FBF001086
-:100320000000102103E0000827BD00183C0208006F
-:100330008C42002027BDFFE810400028AFBF00100E
-:100340000E000D71000000003C05800094A2010821
-:1003500094A3010C8F86002C3042003E3063FFFFD7
-:100360000002140000431025ACC200008CA2010062
-:100370003C07080094E74BFE8FBF0010ACC200049E
-:1003800094A3011694A4010E3C02200000031C005B
-:100390003084FFFF00641825ACC3000800E2382554
-:1003A00094A2011094A3011224040001000214007D
-:1003B0003063FFFF00431025ACC2000C94A201146F
-:1003C00027BD00183042FFFFACC20010ACC00014C3
-:1003D000ACC000180A000D98ACC7001C8FBF0010FD
-:1003E00003E0000827BD00183C0680008CC202B85C
-:1003F0002403000104410008008028213C02080079
-:100400008C420060244200013C010800AC220060E4
-:1004100003E00008006010218C8300209482001605
-:10042000ACC302802442FFFCA4C202843C02080048
-:100430008C42005C8C84000494A3000E24420001D2
-:100440003C010800AC22005C3C021000A4C3028600
-:10045000ACC4028800001821ACC202B803E0000856
-:10046000006010213C0208008C42002027BDFFE8FC
-:100470001040002BAFBF00100E000D7100000000F7
-:100480003C05800094A2010894A3010C8F86002CE7
-:100490003042003E3063FFFF00021400004310258D
-:1004A000ACC200008CA201003C07080094E74BFEA0
-:1004B0008FBF0010ACC2000494A3011694A4010ED7
-:1004C0003C02200000031C003084FFFF006418255C
-:1004D000ACC3000800E2382594A2011094A30112D5
-:1004E00024040001000214003063FFFF00431025C4
-:1004F000ACC2000C94A2011427BD00183042FFFFCB
-:10050000ACC200108CA20118ACC2001490A2010B66
-:10051000304200FFACC200180A000D98ACC7001CA6
-:100520008FBF001003E0000827BD001827BDFFE0C3
-:10053000AFB000103C108000AFB20018AFBF001C7D
-:10054000AFB10014361201009243000B2402001ACE
-:10055000965100081462005B00002821322200013D
-:1005600010400018000000008E42000000022340EE
-:100570003C02003F3442FFFF0044102B10400004B7
-:100580003C030040964200140A00013B00832021F6
-:100590008E030100240201005462000696420014FA
-:1005A0003C028008944200043042000F0002250003
-:1005B0009642001400821025AE0200800A00016FEE
-:1005C000000000003C0208008C420020104000287F
-:1005D000000000000E000D710000000096020108EE
-:1005E0009603010C8F85002C3042003E3063FFFFE4
-:1005F0000002140000431025ACA200008E0201008E
-:100600003C06080094C64BFEACA2000496030116FB
-:100610009604010E3C02200000031C003084FFFF02
-:1006200000641825ACA3000800C230259602011012
-:100630009603011224040001000214003063FFFF3E
-:1006400000431025ACA2000C960201143042FFFFBB
-:10065000ACA200108E020118ACA200149202010B91
-:10066000304200FFACA200180E000D98ACA6001C92
-:100670003C0208008C420040244200013C0108007A
-:10068000AC2200403C0308008C630044322200028C
-:1006900032240004246300013C010800AC23004420
-:1006A000108000080002282B024020218FBF001C70
-:1006B0008FB200188FB100148FB000100A0000C86C
-:1006C00027BD00208FBF001C8FB200188FB100140F
-:1006D0008FB0001000A0102103E0000827BD00200B
-:1006E00027BDFFE03C058000AFB10014AFBF00188C
-:1006F000AFB0001034B101009223000B24020003BC
-:1007000014620043963000083202000110400016C7
-:100710003C02003F8E2300003442FFFF00032340D1
-:100720000044102B504000052402010096220014C2
-:100730003C0300400A0001A400832021546200060B
-:10074000962200143C028008944200043042000FBC
-:10075000000225009622001400821025ACA2008021
-:100760000A0001AF000000000E0000990000000028
-:100770003C0208008C420040244200013C01080079
-:10078000AC2200403C0208008C42004432030004CA
-:10079000244200013C010800AC2200441060000724
-:1007A00032020002022020218FBF00188FB10014F6
-:1007B0008FB000100A0000C827BD002010400015AF
-:1007C0008FBF00183C0480008C8301043C02602031
-:1007D000AC4300148C420004240301FE304203FFAA
-:1007E0001443000C8FBF00188C820100000219C254
-:1007F0002462FFFC2C420008104000032404000285
-:100800002462FFFD004420043C026000AC446914F3
-:100810008FBF00188FB100148FB00010000010219E
-:1008200003E0000827BD00203C0480008C83010009
-:1008300024020100506200033C0280080000000D09
-:100840003C02800894430004000010213063000F34
-:1008500000031D0003E00008AC8300803C02800818
-:10086000344200809042000003E00008AF800000A6
-:1008700003E000080000102127BDFFE83C028000D3
-:10088000AFBF0014AFB000108C430100AC43002098
-:100890008C430104AC4300A89050010B0E0001E50D
-:1008A000321000FF3C02080024424B580010188010
-:1008B0002E10001D16000005006210210E0001EA36
-:1008C000004018210A000205000000008C420000D0
-:1008D0000040F80900000000004018213C02080018
-:1008E0008C42003410600005244400013C0280006A
-:1008F0008C4301043C026020AC4300148FBF001401
-:100900008FB000103C0340003C02800027BD00185F
-:10091000AC4301383C010800AC24003403E000087B
-:100920000000000027BDFFE8AFBF0014AFB000100B
-:100930003C1080008E0201400E0001E5AE02002056
-:100940000E000399000000003C04080024840038D5
-:100950008C8200003C034000AE0301788FBF00147E
-:100960008FB000102442000127BD001803E00008EA
-:10097000AC82000027BDFFE8AFB00010AFBF00148D
-:100980003C1080008E0201800E0001E5AE020020C6
-:100990008E03018024020F00546200083C0280088C
-:1009A0008E0201883C0300E03042FFFF0043102527
-:1009B000AE0200800A00024A3C02800034420080FD
-:1009C0009042000024030050304200FF144300080E
-:1009D0003C0280000E000379000000001440000477
-:1009E0003C0280000E000967000000003C0280000D
-:1009F0003C034000AC4301B83C0208008C42003C80
-:100A00008FBF00148FB00010244200013C01080089
-:100A1000AC22003C03E0000827BD001803E00008FA
-:100A2000000010213C05800034A4010094820008DD
-:100A30003043000230420004104000030000000078
-:100A40000A0000C800000000106000052404000136
-:100A50003C0208008C4200840A00026F244200011C
-:100A60008CA301048F82000C104300080000202199
-:100A70008CA301043C0208008C420084AF83000C6C
-:100A8000244200013C010800AC22008403E000087D
-:100A90000080102127BDFFE83C036010AFBF0014A9
-:100AA000AFB000108C6550002402FF7F3C04800032
-:100AB00000A2282434A5380C24020037AC6550006D
-:100AC000AC82000824020C80AC8200243C060800A2
-:100AD00024C607A83C02080024424B582405001CE9
-:100AE00024A5FFFFAC46000004A1FFFD2442000442
-:100AF0003C020800244201EC3C010800AC224B609F
-:100B00003C020800244206183C010800AC224B6459
-:100B10003C02080024420D103C010800AC224BA00E
-:100B20003C020800244204643C0308002463095486
-:100B30003C0408002484095C3C05080024A52C948E
-:100B40003C010800AC224BC03C0208002442076074
-:100B50003C010800AC264BA83C010800AC254BB476
-:100B60003C010800AC234BBC3C010800AC244BC446
-:100B70003C010800AC224BC83C010800AC234B5C94
-:100B80003C010800AC204B683C010800AC204B6CD9
-:100B90003C010800AC204B703C010800AC204B74B9
-:100BA0003C010800AC204B783C010800AC204B7C99
-:100BB0003C010800AC204B803C010800AC244B8475
-:100BC0003C010800AC204B883C010800AC204B8C59
-:100BD0003C010800AC204B903C010800AC204B9439
-:100BE0003C010800AC204B983C010800AC264B9C13
-:100BF0003C010800AC264BA43C010800AC204BACE7
-:100C00003C010800AC254BB03C010800AC234BB8BC
-:100C10000E00055A000000003C02800034420070C3
-:100C20008C420000AF8200103C0308008C6300205F
-:100C30008F820004104300043C0580000E000D3735
-:100C4000AF8300043C05800034A900708D280000AB
-:100C50008F8400103C0708008CE700BC3C060800AD
-:100C60008CC600B8010420230000102100E43821C4
-:100C700000C2302100E4202B00C430213C010800D8
-:100C8000AC2700BC3C010800AC2600B88CB00000CA
-:100C9000320200071040FFE4AF8800108D260000EC
-:100CA0003C0508008CA500BC3C0408008C8400B8FE
-:100CB00000C8302300A628210000102100A6302BF8
-:100CC0000082202100862021320700013C0108001B
-:100CD000AC2500BC3C010800AC2400B810E00004C6
-:100CE000320200020E0001EC00000000320200029D
-:100CF00010400004320200040E0002170000000041
-:100D0000320200045040FFC53C0280000E00022B5E
-:100D1000000000000A0002D53C0280003C02900066
-:100D200034420001008220253C028000AC440020B7
-:100D30003C0380008C6200200440FFFE00000000A5
-:100D400003E00008000000003C0280003443000182
-:100D50000083202503E00008AC44002027BDFFE00D
-:100D6000AFB10014AFB0001000808821AFBF0018F1
-:100D70000E00031530B000FF8F83FFAC022020214E
-:100D80009062002502028025A07000258C7000185A
-:100D90003C0280000E000320020280241600000A9C
-:100DA0008FBF00183C0380008C6201F80440FFFEF6
-:100DB00024020002AC7101C0A06201C43C02100018
-:100DC000AC6201F88FBF00188FB100148FB0001013
-:100DD00003E0000827BD002027BDFFB8AFBF0044D7
-:100DE000AFB000403C0780008CE601048F82FFA872
-:100DF000AFA600288C450020AFA5002C8C44003CF9
-:100E0000AFA400308C430040AFA300348C42004CB0
-:100E1000AFA60010AFA50014AFA20020AFA200380B
-:100E20003C0208008C420020AFA40018AFA3001CB5
-:100E30008CF00100104000198FBF00440E000D71AE
-:100E4000000000008F83002C3C05080094A54BFE99
-:100E50003C024018AC70000000A228258FA20010B0
-:100E600024040001AC6200048FA20014AC620008EC
-:100E70008FA20018AC62000C8FA2001CAC620010A4
-:100E80008FA20020AC6200148FA20024AC62001874
-:100E90000E000D98AC65001C8FBF00448FB0004061
-:100EA0000000102103E0000827BD004827BDFFE82F
-:100EB000AFBF00103C038000946201843042020006
-:100EC00010400005000020210E000FE3000000008C
-:100ED0000A00038F240400018C6201880440000A88
-:100EE0008FBF00108C6201883C03FF000043102478
-:100EF0003C03040014430004240400018F82FFAC6F
-:100F0000904200088FBF00100080102103E000080D
-:100F100027BD00188F82FFB024050001A040001AF1
-:100F20003C0280000A0003258C44014027BDFFE0FD
-:100F3000AFB100148F91FFACAFBF001CAFB200186F
-:100F4000AFB000109222000024030020304200FFC6
-:100F50001043000C3C028000922200002403003069
-:100F6000304200FF104300073C0280009222000044
-:100F700024030050304200FF144300818FBF001C47
-:100F80003C02800090420148304200FF2443FFFFB2
-:100F90002C6200051040007A8FBF001C00031080F7
-:100FA0003C03080024634AD8004310218C4200000F
-:100FB00000400008000000003C1180008E24014029
-:100FC0000E0003158F92FFAC8E50000C8E22014450
-:100FD0001602000224020001AE42000C0E000320A3
-:100FE0008E2401408E220144145000068FBF001C45
-:100FF0008FB200188FB100148FB000100A000F518B
-:1010000027BD00208E42000C0A00042700000000CB
-:10101000962200103C0480008C8301443042FFFF84
-:10102000146200090000000024020001A622001042
-:101030008C820140AC8202003C021000AC8202387B
-:101040000A00042E8FBF001C962200100A000427FD
-:10105000000000009222000024030020304200FF24
-:101060001443000B3C128000962200123C038000C7
-:101070008C6301443042FFFF14620018000000003E
-:1010800024020001A62200120A0004008FBF001CE7
-:101090008E4401400E00031500000000962200124D
-:1010A0008E4301443050FFFF16030002240200016A
-:1010B000A62200120E0003208E4401408E420144FD
-:1010C000160200068FBF001C8FB200188FB10014EB
-:1010D0008FB000100A00039327BD00209622001253
-:1010E0000A00042700000000962200143C03800040
-:1010F0008C6301443042FFFF1462000900000000CD
-:1011000024020001A62200148FBF001C8FB2001819
-:101110008FB100148FB000100A00126827BD0020A4
-:10112000962200140A0004270000000096220016F0
-:101130003C0380008C6301443042FFFF14620008CE
-:1011400024020001A62200168FBF001C8FB20018D7
-:101150008FB100148FB000100A000B0B27BD0020C8
-:1011600096220016144000068FBF001C3C020800A7
-:101170008C420070244200013C010800AC22007047
-:101180008FB200188FB100148FB0001003E0000878
-:1011900027BD002027BDFFE03C028000AFB1001456
-:1011A000AFBF001CAFB20018AFB000103451010047
-:1011B000922300098C5001002402001F106200AA33
-:1011C0002862002010400018240200382862000A1B
-:1011D0001040000C2402000B286200081040002C74
-:1011E0000000000004600100286200021440002892
-:1011F00024020006106200268FBF001C0A00054A68
-:101200008FB20018106200602862000B144000F7D3
-:101210008FBF001C2402000E106200778FB20018EE
-:101220000A00054A00000000106200D3286200395D
-:101230001040000A2402008024020036106200E3FD
-:1012400028620037104000C524020035106200D823
-:101250008FBF001C0A00054A8FB200181062002DD3
-:101260002862008110400006240200C824020039D0
-:10127000106200C98FBF001C0A00054A8FB2001817
-:10128000106200A28FBF001C0A00054A8FB200182E
-:101290003C0208008C420020104000D48FBF001C8C
-:1012A0000E000D71000000003C028000344201007D
-:1012B0008C4400008F83002C944700083C050800F4
-:1012C00094A54BFEAC6400008C44000400073C0075
-:1012D00000E53825AC6400048C4400189446000CEA
-:1012E000AC6400088C45001C000634002404000196
-:1012F000AC65000C9042000A00C23025AC660010BC
-:10130000AC600014AC600018AC67001C0A00050C4F
-:101310008FBF001C3C0208008C420020104000B32C
-:101320008FBF001C0E000D71000000009624000805
-:101330003C03080094634BFE9625000C0004220237
-:101340009626000E8F82002C0004260000832025A4
-:1013500000052C003C03008000A6282500832025E2
-:10136000AC400000AC400004AC400008AC40000CB5
-:10137000AC450010AC400014AC400018AC44001C5C
-:101380000A00050B240400019622000C14400017EB
-:101390008F91FFAC922200053042001014400013E0
-:1013A000000000000E00031502002021922200051B
-:1013B00002002021344200100E000320A22200056A
-:1013C0009222000024030020304200FF10430086D8
-:1013D000020020218FBF001C8FB200188FB10014B3
-:1013E0008FB000100A00104C27BD00200000000D37
-:1013F0000A0005498FBF001C3C0208008C420020F7
-:101400001040007A8FBF001C0E000D71000000001C
-:101410008E2200048F83002C9624000C3C050800CB
-:1014200094A54BFEAC6200003C0280089442002C64
-:10143000000424003042FFFF008220253C02400EC1
-:1014400000A22825AC640004AC600008AC60000C6D
-:10145000AC600010AC600014AC600018AC65001CFF
-:101460000A00050B240400010E00031502002021D0
-:101470008F92FFB0020020210E000320A640000C36
-:10148000020020210E000325240500013C02080073
-:101490008C420020104000558FBF001C0E000D71C3
-:1014A000000000009622000C8F83002C8F84FFAC7C
-:1014B00000021400AC700000AC620004AC600008D4
-:1014C0008C8200383C05080094A54BFEAC62000CF1
-:1014D0008C86003C3C02401F00A22825AC66001010
-:1014E0008E42000424040001AC620014AC600018B9
-:1014F000AC65001C8FBF001C8FB200188FB10014A8
-:101500008FB000100A000D9827BD00208F82FFAC1D
-:101510002403002090420000304200FF10430033BB
-:101520008FBF001C0E000F37000000001040002F7E
-:101530008FBF001C3C0380008C6201F80440FFFE5A
-:1015400024020002AC7001C0A06201C43C02100081
-:10155000AC6201F80A0005498FBF001C020020217F
-:101560008FBF001C8FB200188FB100148FB0001015
-:101570000A000E8027BD00209625000C02002021C5
-:101580008FBF001C8FB200188FB100148FB00010F5
-:101590000A000EA527BD0020020020218FB20018EE
-:1015A0008FB100148FB000100A000ED027BD0020AC
-:1015B0009225000D020020218FB200188FB1001477
-:1015C0008FB000100A000F2127BD0020020020214B
-:1015D0008FBF001C8FB200188FB100148FB00010A5
-:1015E0000A000EF827BD00208FBF001C8FB2001824
-:1015F0008FB100148FB0001003E0000827BD002059
-:101600003C0380008C6202780440FFFE240200024A
-:10161000AC640240A06202443C02100003E00008F7
-:10162000AC620278000411C003E0000824420240CA
-:10163000A380001803E00008A38000193C03800089
-:101640008C6202780440FFFE8F82001CAC62024074
-:1016500024020002A06202443C02100003E00008E1
-:10166000AC62027803E000080000000090830030C4
-:1016700024020005008040213063003F0000482123
-:1016800014620005000050219082004C9483004EAB
-:10169000304900FF306AFFFFAD00000CAD000010C4
-:1016A000AD000024950200148D05001C8D04001867
-:1016B0003042FFFF0049102300021100000237C32F
-:1016C000004038210086202300A2102B0082202316
-:1016D00000A72823AD05001CAD040018A5090014BF
-:1016E000A5090020A50A001603E00008A50A0022AB
-:1016F00003E000080000000027BDFFD8AFB20018CB
-:101700003C128008AFB40020AFB3001CAFB100148E
-:10171000AFBF0024AFB00010365101009222000C80
-:101720003C140800929400F7304300FF24020001AB
-:1017300010620031008098212402000214620034FB
-:10174000365000800E001242000000009204004C4F
-:101750000E0005573084007F026210212403FF80B1
-:10176000004318243C048000AC8300949245000898
-:101770009204004C3042007F3C0380061485000731
-:10178000004380212402FFFFA22200112402FFFF58
-:10179000A62200120A0005BA2402FFFF96020020CA
-:1017A000A222001196020022A62200128E0200241C
-:1017B0003C048008AE2200143485008090A2004CC6
-:1017C00034830100A06200108CA2003CAC620018BF
-:1017D0008C820068AC6200E48C820064AC6200E041
-:1017E0008C82006CAC6200E824020001A0A20068B8
-:1017F0000A0005D63C0480080E00125B00000000C1
-:1018000036420080A04000680A0005D63C048008EB
-:10181000A2000068A20000690A0006123C028008CB
-:10182000348300808C62003834850100AC62006C27
-:1018300024020001A062006990A200C59083000804
-:10184000305100FF3072007F1232001B3C088008CC
-:101850000E00055702202021026210212403FF8080
-:10186000004318243C048000AC8300943042007F85
-:101870003C038006004380218E02000C1040000DC6
-:10188000020020210E000569000000002622000150
-:10189000305100FF9203003C023410260002102B4E
-:1018A000000210233063007F022288240A0005E032
-:1018B000A203003C3C088008350401008C8200D063
-:1018C00035070080ACE2003C8C8200D0AD02000005
-:1018D00090E5004C908600C590E3004C908400C5D4
-:1018E0002402FF8000A228243063007F308400FFA0
-:1018F00000A628250064182A1060000230A500FF09
-:1019000038A50080A0E5004CA10500093C02800834
-:101910009043000E344400803C058000A043000A40
-:101920008C8300183C027FFF3442FFFF00621824C2
-:10193000AC8300188CA201F80440FFFE00000000F8
-:10194000ACB301C08FBF00248FB400208FB3001C44
-:101950008FB200188FB100148FB000102402000263
-:10196000A0A201C427BD00283C02100003E000082B
-:10197000ACA201F890A2000027BDFFE0AFB20018B2
-:1019800024420001A0A200003C0308008C6300F484
-:10199000304200FFAFB10014AFBF001CAFB0001069
-:1019A00000A088211443000200809021A0A0000024
-:1019B0000E000557922400008F90001C2403FF8026
-:1019C00002021021004310243C038000AC6200247A
-:1019D0000E00055792240000020280213210007F81
-:1019E0003C02800A02028021AE5000008FBF001C22
-:1019F0008FB200188FB100148FB0001003E0000800
-:101A000027BD002094820006908300058C85000C81
-:101A10008C8600108C8700188C88001C8C84002019
-:101A20003C010800A4224BD23C010800A0234BD16A
-:101A30003C010800AC254BD83C010800AC264BDC2F
-:101A40003C010800AC274BE43C010800AC284BE803
-:101A50003C010800AC244BEC03E00008000000004F
-:101A60003C028008344201008C4400343C03800076
-:101A700034650400AC6400388C420038AF85003017
-:101A8000AC62003C3C020005AC620030000000008B
-:101A90000000000003E00008000000003C02000617
-:101AA000308400FF008220253C028000AC440030DE
-:101AB0000000000000000000000000003C03800067
-:101AC0008C620000304200101040FFFD34620400C0
-:101AD00003E00008AF82003094C200003C08080018
-:101AE000950800CA30E7FFFF00804821010210215D
-:101AF000A4C2000094C200003042FFFF00E2102B9D
-:101B000054400001A4C7000094A200003C03080058
-:101B10008C6300CC24420001A4A2000094A2000027
-:101B20003042FFFF144300073C0280080107102BDE
-:101B3000A4A000005440000101003821A4C7000007
-:101B40003C028008344601008CC3002894A20000A7
-:101B50003C0480003042FFFE000210C000621021F1
-:101B6000AC82003C8C82003C0062182318600004A8
-:101B7000000000008CC200240A0006AF24420001CD
-:101B80008CC20024AC8200383C0200503442001069
-:101B90003C038000AC620030000000000000000048
-:101BA000000000008C620000304200201040FFFD69
-:101BB0000000000094A200003C04800030420001BC
-:101BC000000210C0004410218C430400AD2300002B
-:101BD0008C420404AD2200043C02002003E0000813
-:101BE000AC82003027BDFFE0AFB20018AFB10014E7
-:101BF000AFB00010AFBF001C94C2000000C0802135
-:101C00003C120800965200C624420001A6020000C1
-:101C10009603000094E2000000E030211443000528
-:101C20008FB100300E000684024038210A0006E61B
-:101C3000000000008C8300048C82000424420040D9
-:101C400004610007AC8200048C820004044000049C
-:101C5000000000008C82000024420001AC820000E1
-:101C6000960200003042FFFF50520001A600000023
-:101C70009622000024420001A62200003C028008B7
-:101C800034420100962300009442003C14430004B7
-:101C90008FBF001C24020001A62200008FBF001C81
-:101CA0008FB200188FB100148FB0001003E000084D
-:101CB00027BD002027BDFFE03C028008AFBF001811
-:101CC000344201008C4800343C0380003469040035
-:101CD000AC6800388C42003830E700FFAF89003034
-:101CE000AC62003C3C020005AC6200300000000029
-:101CF00000000000000000000000000000000000E4
-:101D0000000000008C82000C8C82000C978300166F
-:101D1000AD2200008C82001000604021AD22000442
-:101D20008C820018AD2200088C82001CAD22000CB1
-:101D30008CA20014AD2200108C820020AD22001471
-:101D400090820005304200FF00021200AD22001810
-:101D50008CA20018AD22001C8CA2000CAD22002029
-:101D60008CA20010AD2200248CA2001CAD22002801
-:101D70008CA20020AD22002C3402FFFFAD260030E3
-:101D8000AD200034506200013408FFFFAD28003858
-:101D900050E000113C0280083C04800834840100BB
-:101DA000948200503042FFFFAD22003C94830044F7
-:101DB00094850044240200013063FFFF000318C231
-:101DC000006418219064005430A5000700A210049C
-:101DD0000A0007510044102534420100AD20003CA8
-:101DE00094430044944400443063FFFF000318C24E
-:101DF000006218213084000790650054240200011D
-:101E0000008210040002102700451024A062005434
-:101E10000000000000000000000000003C0200067E
-:101E2000344200403C038000AC62003000000000FF
-:101E300000000000000000008C6200003042001032
-:101E40001040FFFD3C06800834C20150346304009A
-:101E500034C7014A34C4013434C5014034C6014496
-:101E6000AFA200100E0006C7AF8300308FBF00186E
-:101E700003E0000827BD00208F8300143C05080004
-:101E80008CA500E88F82001C30633FFF000319809F
-:101E900000451021004310212403FF800043182433
-:101EA0003C058000ACA300283042007F3C03800C3E
-:101EB0000043302190C2000D000038213442001050
-:101EC000A0C2000D8F8900143C028008344201003A
-:101ED00094430044000913823048000324020001A7
-:101EE000A4C3000E1102000B2902000210400005DD
-:101EF000240200021100000C240300010A000798CC
-:101F00000000182111020006000000000A000798D6
-:101F1000000018218CC2002C0A00079824430001FD
-:101F20008CC20014244300018CC200180043102B03
-:101F3000144000033C0380080A0007A224070001A4
-:101F4000346301009462004C24420001A462004CFE
-:101F500000091382304300032C6200021040000984
-:101F600000802821146000040000000094C20034A6
-:101F70000A0007B23046FFFF8CC600380A0007B2DD
-:101F800000802821000030213C04080024844BCC30
-:101F90000A0006FB0000000027BDFF90AFB60068F6
-:101FA000AFB50064AFB40060AFB3005CAFB200582F
-:101FB000AFB10054AFBF006CAFB000508C900000C8
-:101FC0000080B0213C0208008C4200E896040032F8
-:101FD0008F83001C2414FF8030843FFF006218218F
-:101FE0000004218000641821007410243C13800038
-:101FF00000A0902190A50000AE620028920400325B
-:102000003C02800C3063007F00628821308400C075
-:10201000240200401482002D0000A8218E350038D3
-:102020008E2200181440000224020001AE22001883
-:102030009202003C304200201440000F00000000DB
-:102040000E00055700A020218F83001C006218217C
-:10205000306400783C02008000822025007418243F
-:10206000AE630800AE6408108E2200188E030008CC
-:1020700000431021AE2200188E22002C8E2300185F
-:10208000244200010062182B1060003D0000000097
-:102090009242000024420001A24200003C030800DA
-:1020A0008C6300F4304200FF50430001A240000066
-:1020B0000E000557924400008F90001C0202102170
-:1020C000005410240A0008B8AE62002492030032C3
-:1020D0002402FFC000431024304200FF14400005DA
-:1020E00024020001AE220018962200340A00082EB5
-:1020F0003055FFFF8E22001424420001AE2200184A
-:102100009202003000021600000216030441001C77
-:10211000000000009602003227A400100080282151
-:10212000A7A2001696020032000030212407000109
-:102130003042FFFFAF8200140E0006FBAFA0001C70
-:10214000960200328F83001C3C0408008C8400E857
-:1021500030423FFF00021180006418210062182104
-:1021600000741024AE62002C3063007F3C02800EAD
-:10217000006218219062000D3042007FA062000DC5
-:102180009222000D30420010504000789242000030
-:102190003C028008344401009482004C8EC300004D
-:1021A0003C130800967300C62442FFFFA482004C33
-:1021B000946200329623000E3054FFFF3070FFFF10
-:1021C0003C0308008C6300D000701807A7A30038F8
-:1021D0009482003E3063FFFF3042FFFF146200072D
-:1021E000000000008C8200303C038000244200305C
-:1021F000AC62003C0A0008568C82002C948200409D
-:102200003042FFFF5462000927A400408C8200384E
-:102210003C03800024420030AC62003C8C820034DD
-:10222000AC6200380A0008653C03800027A500382E
-:1022300027A60048026038210E000684A7A00048A7
-:102240008FA300403C02800024630030AC43003880
-:102250008FA30044AC43003C3C0380003C020005DB
-:10226000AC6200303C028008344401009482004299
-:10227000346304003042FFFF0202102B14400007B9
-:10228000AF8300309482004E9483004202021021FA
-:10229000004310230A00087B3043FFFF9483004E65
-:1022A0009482004202631821005010230062182318
-:1022B0003063FFFF3C028008344401009482003CFC
-:1022C0003042FFFF14430003000000000A00088BA7
-:1022D000240300019482003C3042FFFF0062102B77
-:1022E000144000058F8200309482003C006210236D
-:1022F0003043FFFF8F820030AC550000AC4000043B
-:10230000AC540008AC43000C3C0200063442001000
-:102310003C038000AC6200300000000000000000C0
-:10232000000000008C620000304200101040FFFDF1
-:102330003C04800834840100001018C20064182195
-:102340009065005432020007240600010046100484
-:1023500000451025A0620054948300429622000E8E
-:1023600050430001A386001892420000244200015D
-:10237000A24200003C0308008C6300F4304200FFDE
-:1023800050430001A24000000E0005579244000097
-:102390008F90001C2403FF800202102100431024B0
-:1023A0003C038000AC6200240E00055792440000FC
-:1023B000020280213210007F3C02800A020280214A
-:1023C000AED000008FBF006C8FB600688FB5006480
-:1023D0008FB400608FB3005C8FB200588FB100548F
-:1023E0008FB0005003E0000827BD007027BDFFD864
-:1023F000AFB3001CAFB20018AFB10014AFB0001003
-:10240000AFBF00200080982100E0802130B1FFFFA5
-:102410000E000D7130D200FF00000000000000002F
-:10242000000000008F82002CAC510000AC52000470
-:10243000AC530008AC40000CAC400010AC400014A1
-:10244000AC4000183C03080094634BFE0203802557
-:10245000AC50001C00000000000000000000000064
-:10246000240400018FBF00208FB3001C8FB200181E
-:102470008FB100148FB000100A000D9827BD0028FE
-:1024800030A5FFFF30C600FF24030C803C02800013
-:10249000AC43002400000000000000000000000029
-:1024A00000000000000000000A0008C90000000051
-:1024B0003C028008344301009462000E3C0808008E
-:1024C000950800C63046FFFF14C000043402FFFF29
-:1024D000946500DA0A00091F8F84001C10C20027CF
-:1024E000000000009462004E9464003C3045FFFF01
-:1024F00000A6102300A6182B3087FFFF10600004F1
-:102500003044FFFF00C5102300E210233044FFFFDA
-:102510000088102B1040000E00E810233C028008B9
-:10252000344401002403000134420080A443001617
-:102530002402FFFFA482000E948500DA8F84001C21
-:102540000000302130A5FFFF0A0008EE3C076020A4
-:102550000044102A104000093C02800834430080E7
-:102560009462001630420001104000043C028000DA
-:102570009442007E24420014A462001603E0000886
-:102580000000000027BDFFE03C028008AFBF001C38
-:10259000AFB0001834420100944300429442004C12
-:1025A000104000193068FFFF9383001824020001D7
-:1025B000146200298FBF001C3C06800834D0010043
-:1025C000000810C20050102190420054310300074F
-:1025D00034C70148304200FF00621007304200015A
-:1025E00034C9014E34C4012C34C5013E10400016DC
-:1025F00034C601420E0006C7AFA900109602004281
-:102600000A00093C3048FFFF3C02800834440100C6
-:1026100094830044948200421043000F8FBF001C3B
-:1026200094820044A482004294820050A482004E0E
-:102630008C820038AC82003094820040A482003E3C
-:102640009482004AA48200488FBF001C8FB00018FB
-:102650000A0008FA27BD00208FB0001803E0000828
-:1026600027BD002027BDFFA0AFB1004C3C1180006A
-:10267000AFBF0058AFB30054AFB20050AFB0004886
-:102680003626018890C200033044007FA3A40010C6
-:102690008E32018090C200003043007F240200038C
-:1026A0001062003BAF92001C28620004104000063C
-:1026B0002402000424020002106200098FBF0058A7
-:1026C0000A000B038FB300541062004B2402000574
-:1026D0001062014C8FBF00580A000B038FB30054E7
-:1026E000000411C0024210212404FF802442024051
-:1026F0000044102426430040AE2200243063007FB3
-:102700003C02800A006218219062003CAFA3003CAA
-:1027100000441025A062003C8FA3003C9062003C66
-:10272000304200401040016A8FBF00583C108008C2
-:10273000A3800018361001008E0200D08C63003494
-:1027400027A4003C27A50010004310210E0007B469
-:10275000AE0200D093A200103C038000A20200C58C
-:102760008C6202780440FFFE8F82001CAC62024043
-:1027700024020002A06202443C021000AC62027813
-:102780000E00092F000000000A000B028FBF005846
-:102790003C05800890C3000190A2000B1443014C3B
-:1027A0008FBF005834A400808C8200189082004CA7
-:1027B00090A200088C8300183C027FFF3442FFFF88
-:1027C000006218243C0208008C4200B4AC8300185C
-:1027D0003C038000244200013C010800AC2200B40C
-:1027E0008C6201F80440FFFE8F82001CAC6201C0C5
-:1027F0000A000ACA240200023C10800890C30001AB
-:102800009202000B144301328FBF005836050110AD
-:1028100027A400180E000E202406000327A4002879
-:10282000360501E00E000E20240600038FA20028CA
-:1028300036030100AE0200648FA2002CAE020068D5
-:102840008FA20030AE02006C93A40018906300C504
-:102850002402FF800082102400431025305000FF26
-:102860003084007F3202007F0082102A5440000131
-:102870003A1000800E0005570000000002421021AF
-:102880002403FF8000431024AE22009493A4001878
-:102890003C130800927300F70E0005573084007F48
-:1028A000024210213042007F3C0380060043402159
-:1028B0008FA3001C2402FFFF10620034AFA8004069
-:1028C00093A2001995030014304400FF3063FFFF0A
-:1028D0000064182B10600010000000009504001424
-:1028E0008D07001C8D0600183084FFFF0044202354
-:1028F0000004210000E438210000102100E4202B16
-:1029000000C2302100C43021AD07001CAD06001804
-:102910000A000A2393A20019950400148D07001CD5
-:102920008D0600183084FFFF008220230004210060
-:10293000000010210080182100C2302300E4202B69
-:1029400000C4302300E33823AD07001CAD06001897
-:1029500093A200198FA30040A462001497A2001A4A
-:10296000A46200168FA2001CAC6200108FA2001C93
-:10297000AC62000C93A20019A462002097A2001A76
-:10298000A46200228FA2001CAC6200243C048008D8
-:10299000348300808C6200388FA2002002008821DE
-:1029A000AC62003C8FA20020AC82000093A2001811
-:1029B000A062004C93A20018A0820009A0600068E9
-:1029C00093A200181051005293A400183230007FD7
-:1029D0000E00055702002021024210212407FF802B
-:1029E0003046007F3C03800000471024AC62009416
-:1029F0003C02800600C2302190C2003CAFA60040DD
-:102A00000000202100471025A0C2003C8FA80040F4
-:102A100095020002950300148D07001C3042FFFF51
-:102A20003063FFFF8D0600180043102300021100E1
-:102A300000E2382100E2102B00C4302100C2302116
-:102A4000AD07001CAD06001895020002A502001497
-:102A5000A50000168D020008AD0200108D020008CE
-:102A6000AD02000C95020002A5020020A500002284
-:102A70008D020008AD0200249102003C304200406B
-:102A80001040001A26220001A3B000383C10800834
-:102A9000A3800018361001008E0200D08D03003490
-:102AA00027A4004027A50038004310210E0007B4DA
-:102AB000AE0200D093A200383C038000A20200C501
-:102AC0008C6202780440FFFE8F82001CAC620240E0
-:102AD00024020002A06202443C021000AC620278B0
-:102AE0000E00092F00000000262200013043007F65
-:102AF00014730004004020212403FF8002231024CB
-:102B00000043202693A200180A000A3F309100FFDC
-:102B10008FA3001C2402FFFF1062000A309000FF08
-:102B200024820001248300013042007F14530005F9
-:102B3000307000FF2403FF80008310240043102620
-:102B4000305000FF3C0280089042000802008821BB
-:102B5000305000FF123000193222007F000211C0F5
-:102B600002421021244202402403FF800043182423
-:102B70003C048000AC8300943042007F3C0380061C
-:102B8000004310218C43000C004020211060000BFA
-:102B9000AFA200400E0005690000000026230001DE
-:102BA0002405FF803062007F145300020225202498
-:102BB000008518260A000AA3307100FF3C04800833
-:102BC000348400808C8300183C027FFF3442FFFF76
-:102BD00000621824AC8300183C0380008C6201F86A
-:102BE0000440FFFE00000000AC7201C0240200029D
-:102BF000A06201C43C021000AC6201F80A000B02A2
-:102C00008FBF00583C04800890C300019082000BE5
-:102C10001443002F8FBF00583490008092020008A8
-:102C200030420040104000200000000092020008E6
-:102C30000002160000021603044100050240202194
-:102C40000E000EA5240500930A000B028FBF00584A
-:102C50009202000924030018304200FF1443000DC3
-:102C600002402021240500390E000E3D00003021D5
-:102C70000E0003158F84001C8F82FFAC240300120A
-:102C8000A04300090E0003208F84001C0A000B02E1
-:102C90008FBF0058240500360E000E3D0000302185
-:102CA0000A000B028FBF00580E00031502402021BE
-:102CB000920200058F84001C344200200E00032085
-:102CC000A20200050E00104C8F84001C8FBF00581C
-:102CD0008FB300548FB200508FB1004C8FB00048BA
-:102CE00024030C803C02800027BD006003E0000844
-:102CF000AC43002427BDFFE83C028008AFB00010C1
-:102D0000AFBF0014344501003C1080008E0201402A
-:102D100094A3000E0000302100402021AF82001C4F
-:102D20003063FFFF3402FFFF106200063C076020A3
-:102D30002402FFFFA4A2000E94A500DA0E0008EE04
-:102D400030A5FFFF24020C80AE0200248FBF0014C8
-:102D50008FB0001003E0000827BD001827BDFFC09A
-:102D60003C0980003C058008AFB70034AFB20020BA
-:102D7000AFBF0038AFB60030AFB5002CAFB40028FD
-:102D8000AFB30024AFB1001CAFB000183532010062
-:102D900034A801008D2701008E4200148D0300D459
-:102DA0000000B821A38000180043102318400055EC
-:102DB000AF87001C8E4200142403FF8024E40040EF
-:102DC000AD0200D490A60008910500C53084007FB4
-:102DD00030D3007F30A200FF000211C000E21021BA
-:102DE00024420240A3A50010004310248D1400D0FB
-:102DF0008D1500D4AD22002493A300103C02800A5C
-:102E000000822021AFA40014107300330000B02111
-:102E10008FA3001427A4001427A500108C6200348F
-:102E20000282802102B010230440002B2411FF8075
-:102E30009062003C02221024304200FF1440001B2C
-:102E40000200A0219062003C34420040A062003C9D
-:102E500093A2001024420001304300FFA3A20010FF
-:102E60003C0208008C4200F450620001A3A0001054
-:102E70000E00055793A400108F90001C3C038000A7
-:102E80000202102100511024AC6200240E000557EC
-:102E900093A40010020280213210007F3C02800ABD
-:102EA000020280210A000B81AFB000140E0007B4AB
-:102EB000000000003C02800834420100AC5000D009
-:102EC00093A3001024160001A04300C593A2001094
-:102ED0001453FFD08FA300142402000116C200096E
-:102EE0003C0380008C6202780440FFFE8F82001C4D
-:102EF000AC62024024020002A06202443C021000C4
-:102F0000AC6202789242000B24030002304200FFC0
-:102F1000144300720000000096420008304300FF96
-:102F20002402008214620040240200843C028000DB
-:102F3000344901008D22000C952300060002160280
-:102F40003063FFFF3044003F240200271082000F4F
-:102F5000AF830014288200281040000824020031AA
-:102F6000240200211082000924020025108200079B
-:102F7000938200190A000BC00000000010820007B5
-:102F8000938200190A000BC0000000000E00076CBD
-:102F9000012020210A000C40000000003C038000BA
-:102FA0008C6202780440FFFE8F82001CAC620240FB
-:102FB00024020002A06202443C021000AC620278CB
-:102FC0000A000C4000000000952300069124000533
-:102FD0008D25000C8D2600108D2700188D28001CD3
-:102FE0008D290020244200013C010800A4234BD27B
-:102FF0003C010800A0244BD13C010800AC254BD873
-:103000003C010800AC264BDC3C010800AC274BE43B
-:103010003C010800AC284BE83C010800AC294BEC13
-:103020000A000C40A38200191462000A24020081E5
-:103030003C02800834420100944500DA92460005C3
-:103040008F84001C30A5FFFF30C600FF0A000C0172
-:103050003C0760211462005C000000009242000AFC
-:10306000304300FF30620020104000073062004013
-:103070003C02800834420100944500DA8F84001C31
-:103080000A000BFF24060040104000070003160052
-:103090003C02800834420100944500DA8F84001C11
-:1030A0000A000BFF240600410002160304410046FB
-:1030B0003C02800834420100944500DA8F84001CF1
-:1030C0002406004230A5FFFF3C0760190E0008EE01
-:1030D000000000000A000C40000000009242000BBB
-:1030E00024040016304200FF104400063C06800015
-:1030F0009242000B24030017304200FF14430032B9
-:103100000000000034C5010090A2000B304200FF17
-:103110001444000B000080218CA200208CA400200D
-:103120002403FF8000431024000211403084007FFC
-:10313000004410253C03200000431025ACC2083099
-:1031400094A20008000214000002140304420001CB
-:103150002410000194A20008304200805040001A60
-:103160000200B82194A2000830422000504000160E
-:103170000200B8218CA300183C021C2D344219ED2A
-:10318000106200110200B8213C0208008C4200D4F9
-:10319000104000053C028008240300043442010072
-:1031A000A04300EC3C02800834420100944500DA60
-:1031B0008F84001C2406000630A5FFFF0E0008EED9
-:1031C0003C0760210200B8210E00092F000000001A
-:1031D0009242000A30420008104000043C02800085
-:1031E0000E00121F000000003C02800024030C802F
-:1031F000AC4300248FBF003802E010218FB60030AE
-:103200008FB700348FB5002C8FB400288FB3002403
-:103210008FB200208FB1001C8FB0001803E00008AF
-:1032200027BD00402402FF80008220243C02900041
-:1032300034420007008220253C028000AC4400207C
-:103240003C0380008C6200200440FFFE0000000070
-:1032500003E00008000000003C0380002402FF801F
-:10326000008220243462000700822025AC64002004
-:103270008C6200200440FFFE0000000003E0000814
-:10328000000000003C0280082403000534420100D5
-:10329000A04300EC3C0280008C4201003C03800013
-:1032A000AF82001C8C6202780440FFFE8F82001CFB
-:1032B000AC62024024020002A06202443C02100000
-:1032C000AC62027803E000080000000027BDFFE8C0
-:1032D0003C068000AFBF001034C5010094A2000876
-:1032E000304400FF38830082388200842C63000160
-:1032F0002C42000100621825106000302402008377
-:1033000093820019504000398FBF00103C02080022
-:1033100090424BD88CC401003C07080094E74BD284
-:103320003046003F38C3003238C2003F2C630001F2
-:103330002C42000100621825AF84001CAF870014E6
-:10334000A38000191460000600A0202124020020A0
-:1033500014C200113402FFFF14E2000F000000004D
-:103360002402002014C20005000000008CA30014F9
-:103370002402FFFF1062000A000000003C04080065
-:1033800024844BCC000030210E0006FB24070001F2
-:103390000A000CB6000000000E00076C00000000E0
-:1033A0000E00092F0000000024030C803C02800066
-:1033B000AC4300240A000CEF8FBF001014820006FB
-:1033C0002482FF808CC301043C026020AC430014C3
-:1033D0000A000CEF8FBF0010304200FF2C420002A9
-:1033E00010400004240200228FBF00100A000B25A9
-:1033F00027BD0018148200038FBF00100A000C6F55
-:1034000027BD00183C0208008C4200201040001D1F
-:103410002402001890A3000914620003240200167D
-:103420000A000CDB240300081462000724020017C2
-:10343000240300123C02800834420080A0430009AB
-:103440000A000CE894A700085462000794A700083B
-:103450008F82FFAC2404FFFE904300050064182413
-:10346000A043000594A7000890A6001B8CA40000B0
-:1034700094A500068FBF001000073C000A0008C991
-:1034800027BD001803E0000827BD00183C05080010
-:1034900094A54C0A3C0308008C634C143C04800047
-:1034A00030A2FFFF000230C02402FFF000C210244F
-:1034B00000621821AC83003C3C0208008C424C1096
-:1034C0003C038000AC8200383C02005034420010C3
-:1034D000AC620030000000000000000000000000AE
-:1034E0008C620000304200201040FFFD30C2000816
-:1034F000104000093C0280008C6204088C63040CBC
-:103500003C010800AC224C003C010800AC234C04F8
-:103510000A000D1B3C0300208C4304008C42040471
-:103520003C010800AC234C003C010800AC224C04D8
-:103530003C0300203C028000AC4300303C0780008C
-:103540008CE20030004310241440FFFD0000000016
-:103550003C03080094634C083C02080094424C0C65
-:103560003C06080094C64C0E24A5000100621821F8
-:1035700030A4FFFF3C020040ACE200303C010800F8
-:10358000A4234C083C010800A4254C0A148600031F
-:10359000000000003C010800A4204C0A03E00008E1
-:1035A0000000000027BDFFE83C04080024844BF025
-:1035B0003C05800AAFBF00100E000E202406000A52
-:1035C0003C02080094424BF23C03080094634C0E0A
-:1035D0003042000F244200030043180424027FFFFE
-:1035E0000043102B10400002AF8300280000000DA4
-:1035F0000E000CF1000000003C02080094424BF465
-:103600003C03080094634BFA8FBF00103042000F58
-:10361000000215000062182527BD00183C0280003A
-:1036200003E00008AC4300A03C02800A944300067B
-:103630003C02080094424BFA3C010800A4234BF6DC
-:10364000004310238F8300283042FFFF0043102BDC
-:1036500003E000083842000127BDFFE8AFBF0010BB
-:103660003C02800A944200063C010800A4224BF66A
-:103670000E000D58000000005440FFFA3C02800A82
-:103680008FBF001003E0000827BD001827BDFFE82A
-:10369000AFBF00100E000D580000000010400003E6
-:1036A000000000000E000D64000000003C02080055
-:1036B0008C424C003C0380008FBF0010AC6200388D
-:1036C0003C0208008C424C043464040027BD0018FE
-:1036D000AC62003C3C020005AC620030AF84002CC0
-:1036E00003E00008AF8000248F8200243C03000622
-:1036F00000021140004310253C038000AC62003002
-:103700000000000000000000000000008C620000CB
-:10371000304200101040FFFD34620400AF82002CE4
-:1037200003E00008AF8000243C0608008CC64C046F
-:103730008F8500248F83002C3C02080094424BFAB2
-:1037400027BDFFE024A500012463002024420001DE
-:1037500024C70020AFB10014AFB00010AFBF0018F5
-:10376000AF850024AF83002C3C010800A4224BFA53
-:10377000309000FF3C010800AC274C0404C1000855
-:103780000000882104E00006000000003C02080060
-:103790008C424C00244200013C010800AC224C0049
-:1037A0003C04080094844C083C02080094424BFA04
-:1037B0002E030001004410262C440001008318242D
-:1037C000106000040010102B24020001AF820020C2
-:1037D0000010102B00821025144000068F8200205C
-:1037E000144000048F830024240200101462000F90
-:1037F000000000000E000D88241100013C030800A9
-:1038000094634BFA3C02080094424C081462000393
-:10381000000000000E000CF1000000001600000384
-:10382000000000000E000D71000000003C030800C5
-:1038300094634BFE3C02080094424BFC246300015D
-:103840003064FFFF3C010800A4234BFE14820003F8
-:10385000000000003C010800A4204BFE1200000BF9
-:10386000000000003C02080094424BF43C030800B6
-:1038700094634BFA00021500006218253C02800098
-:10388000AC4300A00A000DF7AF8000200E000D58D9
-:103890000000000010400004022010210E000D6402
-:1038A00000000000022010218FBF00188FB100140B
-:1038B0008FB0001003E0000827BD002003E00008DF
-:1038C000000000008F8200343C030006000211401B
-:1038D000004310253C038000AC6200300000000073
-:1038E00000000000000000008C6200003042001068
-:1038F0001040FFFD34620400AF82003003E0000896
-:10390000AF80003403E000080000102103E000084D
-:10391000000000003084FFFF30A5FFFF00001821E9
-:1039200010800007000000003082000110400002FB
-:1039300000042042006518210A000E1600052840E8
-:1039400003E000080060102110C0000624C6FFFF3D
-:103950008CA2000024A50004AC8200000A000E2006
-:103960002484000403E000080000000010A0000808
-:1039700024A3FFFFAC860000000000000000000050
-:103980002402FFFF2463FFFF1462FFFA2484000473
-:1039900003E00008000000003C0280083442008080
-:1039A00024030001AC43000CA4430010A443001204
-:1039B000A443001403E00008A443001627BDFFD869
-:1039C000248200802407FF803043007FAFB00010C6
-:1039D00000808021004720243C0208008C42002007
-:1039E0003C08800EAFB3001CAFB20018AFB100149A
-:1039F000AFBF00203C0980000068182130B100FFF3
-:103A000030D200FF1040002900009821260201005A
-:103A1000AD24002C004728243042007F004820219C
-:103A20009062000024030050304200FF1443000461
-:103A300000000000AD25002C948200DA3053FFFF17
-:103A40000E000D71000000003C03080094634BFE63
-:103A50008F82002C00112C0000A3282500122400C6
-:103A60003C0340003484000100A32825AC50000032
-:103A70008FBF0020AC4000048FB20018AC53000888
-:103A80008FB10014AC40000C8FB3001CAC4400108C
-:103A90008FB00010AC40001424040001AC400018AA
-:103AA00027BD00280A000D98AC45001C8FBF0020E0
-:103AB0008FB3001C8FB200188FB100148FB00010AC
-:103AC00003E0000827BD00283C06800034C2010046
-:103AD0009043000F240200101062000E28650011B0
-:103AE00010A0000724020012240200082405003A56
-:103AF000106200060000302103E000080000000012
-:103B0000240500351462FFFC000030210A000E3D40
-:103B1000000000008CC200748F83FFAC24420FA011
-:103B200003E00008AC62000C27BDFFE8AFBF001047
-:103B30000E000325240500013C0480088FBF0010FF
-:103B40002402000134830080A462001227BD001803
-:103B50002402000103E00008A080001A27BDFFE056
-:103B6000AFB20018AFB10014AFB00010AFBF001C6F
-:103B700030B2FFFF0E000315008088213C02800850
-:103B8000345000809202000924030004304200FFF8
-:103B90001443000C3C028008124000082402000A72
-:103BA0000E000E3400000000920200052403FFFE08
-:103BB00000431024A202000524020012A202000900
-:103BC0003C02800834420080022020210E000320A5
-:103BD000A040002716400003022020210E000E986E
-:103BE0000000000002202021324600FF8FBF001C91
-:103BF0008FB200188FB100148FB000102405003868
-:103C00000A000E3D27BD002027BDFFE0AFBF001C0E
-:103C1000AFB20018AFB10014AFB000100E00031522
-:103C2000008080210E000E34000000003C0280085D
-:103C30003445008090A2000924120018305100FF82
-:103C4000123200030200202124020012A0A2000967
-:103C500090A200052403FFFE004310240E00032061
-:103C6000A0A2000502002021240500201632000732
-:103C7000000030218FBF001C8FB200188FB10014DC
-:103C80008FB000100A00032527BD00208FBF001C45
-:103C90008FB200188FB100148FB0001024050039C6
-:103CA0000A000E3D27BD002027BDFFE83C02800032
-:103CB000AFB00010AFBF0014344201009442000CBA
-:103CC000240500360080802114400012304600FF99
-:103CD0000E000315000000003C0280083442008002
-:103CE00024030012A0430009904300053463001030
-:103CF0000E000E34A04300050E0003200200202118
-:103D0000020020210E000325240500200A000F15C3
-:103D1000000000000E000E3D000000000E00031524
-:103D2000020020213C0280089043001B2405FF9FD5
-:103D300002002021006518248FBF00148FB00010EE
-:103D4000A043001B0A00032027BD001827BDFFE089
-:103D5000AFBF0018AFB10014AFB0001030B100FF1A
-:103D60000E000315008080213C028008240300120D
-:103D7000344200800E000E34A04300090E000320E0
-:103D80000200202102002021022030218FBF0018D4
-:103D90008FB100148FB00010240500350A000E3DCD
-:103DA00027BD00203C0480089083000E9082000A0A
-:103DB0001443000B000028218F82FFAC2403005025
-:103DC0002405000190420000304200FF144300042B
-:103DD000000000009082000E24420001A082000E2C
-:103DE00003E0000800A010213C0380008C6201F871
-:103DF0000440FFFE24020002AC6401C0A06201C4C2
-:103E00003C02100003E00008AC6201F827BDFFE0AF
-:103E1000AFB200183C128008AFB10014AFBF001C55
-:103E2000AFB0001036510080922200092403000A2E
-:103E3000304200FF1443003A000000008E430004AB
-:103E40008E2200385062007E8FBF001C922200003C
-:103E500024030050304200FF144300253C02800040
-:103E60008C4201408E43000436420100022028218A
-:103E7000AC43001C9622005C8E2300383042FFFFCA
-:103E80000002104000621821AE23001C8E43000483
-:103E90008E2400389622005C006418233042FFFF15
-:103EA00000031843000210400043102A104000068F
-:103EB000000000008E4200048E23003800431023CF
-:103EC0000A000F83000220439622005C3042FFFF6D
-:103ED000000220403C02800834430100344200804C
-:103EE000ACA4002CA040002424020001A062000C1D
-:103EF0000E000F3700000000104000518FBF001C63
-:103F00003C0280008C4401408FBF001C8FB200181F
-:103F10008FB100148FB000100A000F4827BD002099
-:103F20009222000924030010304200FF14430004D1
-:103F30003C0280008C4401400A000FC5000028218B
-:103F40009222000924030016304200FF14430006A9
-:103F500024020014A22200093C0280008C4401408B
-:103F60000A000FD88FBF001C8E2200388E23003C21
-:103F700000431023044100328FBF001C922200270F
-:103F800024420001A2220027922200273C030800BD
-:103F90008C630048304200FF144300163C10800040
-:103FA0009222000924030004304200FF1443000958
-:103FB0003C0280008C4401408FBF001C8FB200186F
-:103FC0008FB100148FB00010240500930A000EA5D5
-:103FD00027BD00208C440140240500938FBF001CA6
-:103FE0008FB200188FB100148FB000100A000F219B
-:103FF00027BD00208E0401400E00031500000000C4
-:104000008E4200042442FFFFAE4200048E22003C98
-:104010002442FFFFAE22003C0E0003208E0401402C
-:104020008E0401408FBF001C8FB200188FB10014A6
-:104030008FB00010240500040A00032527BD0020CE
-:104040008FB200188FB100148FB0001003E0000889
-:1040500027BD00203C0680008CC201883C038008FC
-:10406000346500809063000E00021402304400FFAB
-:10407000306300FF1464000E3C02800890A200260A
-:10408000304200FF104400098F82FFACA0A400263C
-:104090002403005090420000304200FF1443000609
-:1040A000000000000A00058C8CC401803C028008DE
-:1040B00034420080A044002603E000080000000015
-:1040C00027BDFFE030E700FFAFB20018AFBF001C14
-:1040D000AFB10014AFB000100080902114E00006D2
-:1040E00030C600FF000000000000000D00000000CE
-:1040F0000A001037240001173C0380089062000E6C
-:10410000304200FF144600233462008090420026B3
-:10411000304200FF1446001F000000009062000FB4
-:10412000304200FF1446001B000000009062000AAD
-:10413000304200FF144600038F90FFAC0000000DDA
-:104140008F90FFAC8F82FFB03C118000AE05003C29
-:10415000AC450000A066000A0E0003158E24010085
-:10416000A20000240E0003208E2401003C038000E6
-:104170008C6201F80440FFFE24020002AC7201C010
-:10418000A06201C43C021000AC6201F80A001038C1
-:104190008FBF001C000000000000000D00000000A8
-:1041A000240001408FBF001C8FB200188FB1001493
-:1041B0008FB0001003E0000827BD00208F83FFAC04
-:1041C0003C0280008C440100344201008C65003CBC
-:1041D0009046001B0A000FFE240700013C028008E5
-:1041E0009043000E9042000A00431026304200FF28
-:1041F00003E000080002102B27BDFFE03C0280080E
-:10420000AFB10014AFB00010AFBF00183450008041
-:104210009202000524030030304200301443008431
-:10422000008088213C0208008C4200201040008160
-:104230008FBF00180E000D71000000008F86002C4B
-:10424000ACD100009202000892030009304200FF46
-:1042500000021200306300FF00431025ACC20004CE
-:104260009202004D000216000002160304410005F0
-:10427000000000003C0308008C6300480A00107630
-:104280003C108008920200083042004014400003B5
-:104290000000182192020027304300FF3C108008E4
-:1042A000361100809222004D00031E003C050800DC
-:1042B00094A54BFE304200FF000214000062182556
-:1042C000ACC300088E2300303C02C00B00A228259E
-:1042D000ACC3000C8E22003400002021ACC20010C0
-:1042E0008E220038ACC200148E22003CACC20018F2
-:1042F0000E000D98ACC5001C8E0200048F84002CAB
-:104300003C058000AC8200008E220020AC820004BC
-:104310008E22001CAC8200088E2200588CA30074F0
-:1043200000431021AC82000C8E22002CAC820010C5
-:104330008E2200408E23004400021400004310250A
-:10434000AC8200149222004D24030080304200FF12
-:1043500014430003000000000A0010B8AC800018ED
-:104360008E23000C240200011062000E2402FFFFC5
-:1043700092220008304200401440000A2402FFFF4D
-:104380008E23000C8CA20074006218233C020800EB
-:10439000006210241440000200002821006028213F
-:1043A00000051043AC8200183C02080094424BFE0A
-:1043B0003C03C00C00002021004310258F83002CFB
-:1043C0000E000D98AC62001C3C0480083482010091
-:1043D0008C4200008F83002C348400803C0608004F
-:1043E00094C64BFEAC620000AC6000048C850048B3
-:1043F0003C02400D00C23025AC650008AC60000CEA
-:10440000AC600010908200058FBF00188FB10014BF
-:1044100000021600AC6200148FB00010AC600018EF
-:1044200024040001AC66001C0A000D9827BD002082
-:104430008FBF00188FB100148FB0001003E0000888
-:1044400027BD00203C0280009443007C3C02800891
-:1044500034460100308400FF3065FFFF2402000570
-:1044600024A34650A0C4000C5482000C3065FFFF0A
-:1044700090C2000D2C4200071040000724A30A0040
-:1044800090C3000D240200140062100400A2102149
-:104490000A0010F53045FFFF3065FFFF3C02800841
-:1044A0003442008003E00008A44500143C03800867
-:1044B00034680080AD050038346701008CE2001CD0
-:1044C000308400FF00A210231840000330C600FF14
-:1044D00024A2FFFCACE2001C308200015040000826
-:1044E0003C0380088D02003C00A21023044100120E
-:1044F000240400058C62000410A2000F3C03800815
-:104500008C62000414A20018000000003C020800A5
-:104510008C4200D830420020104000093C02800844
-:1045200034620080906300089042004C1443000401
-:104530003C028008240400040A0010DF0000000090
-:104540003443008034420100A040000C24020001EA
-:10455000A462001410C000043C0280008C440100DE
-:104560000A000F480000000003E0000800000000FF
-:1045700027BDFFE800A61823AFBF00101860004E4B
-:10458000308800FF3C02800834470080A0E000240F
-:1045900034440100A0E000278C82001C00A21023FC
-:1045A0000440002B000000008CE2003C94E3005C1F
-:1045B0008CE4002C004530233063FFFF00C318213A
-:1045C0000083202B1080000400E018218CE2002CD6
-:1045D0000A00114800A2102194E2005C3042FFFF63
-:1045E00000C2102100A21021AC62001C3C02800815
-:1045F0003447008094E2005C8CE3001C3042FFFFF3
-:104600000002104000A210210043102B10400003B4
-:10461000000000000A0011598CE2001C94E2005CCA
-:104620003042FFFF0002104000A21021ACE2001C4B
-:104630003C028008344201008FBF0010010020219D
-:1046400024060001A040000C0A0010F927BD001844
-:104650008CE2001C004610230043102B5440000144
-:10466000ACE5001C94E2005C3042FFFF0062102BBE
-:10467000144000072402000294E2005C8CE3001C5A
-:104680003042FFFF00621821ACE3001C240200024C
-:10469000ACE500380E000F37A082000C1040001867
-:1046A0008FBF00103C0280008C4401008FBF0010BF
-:1046B0000A000F4827BD00183102001010400010FA
-:1046C0008FBF00103C028008344500808CA3001C82
-:1046D00094A2005C006618233042FFFF006218219C
-:1046E0003C023FFF3444FFFF0083102B5440000185
-:1046F0000080182100C31021ACA2001C8FBF001045
-:1047000003E0000827BD001827BDFFE800C04021D6
-:1047100000A63023AFBF001018C00026308A00FF6B
-:104720003C028008344900808D24001C8D23002C1D
-:10473000008820230064182B1060000F344701000C
-:104740008CE2002000461021ACE200208CE2002028
-:104750000044102B1440000B3C023FFF8CE2002071
-:1047600000441023ACE200209522005C3042FFFFA1
-:104770000A0011AE00822021ACE00020008620213A
-:104780003C023FFF3443FFFF0064102B5440000104
-:10479000006020213C0280083442008000851821FE
-:1047A000AC43001CA0400024A04000270A0011FDDB
-:1047B0008FBF001031420010104000408FBF00102A
-:1047C0003C06800834C400808C82003C00481023E2
-:1047D0005840003B014020219082002424420001E7
-:1047E000A0820024908200243C0308008C630024F3
-:1047F000304200FF0043102B544000348FBF0010A4
-:1048000034C201008C42001C00A210231840002F6B
-:104810008FBF00108CC300049482005C00681823D2
-:104820003042FFFF00031843000210400043102AEB
-:1048300010400005000000008CC200040048102356
-:104840000A0011E3000210439482005C3042FFFF33
-:10485000000210403C068008AC82002C34C5008069
-:1048600094A2005C8CA4002C94A3005C3042FFFF57
-:1048700000021040008220213063FFFF00832021CE
-:1048800001041021ACA2001C8CC2000434C601003B
-:10489000ACC2001C240200020E000F37A0C2000CA4
-:1048A0001040000A8FBF00103C0280008C440100C1
-:1048B0008FBF00100A000F4827BD001801402021BB
-:1048C000240600010A0010F927BD001803E00008C3
-:1048D00027BD00183C098008352A00808D42003C25
-:1048E000308300FF352B01000046102330E700FF26
-:1048F000184000060060202124020001A160000C85
-:10490000A160000D0A001190A542001424020005C8
-:10491000352901000000302114E20008A1400027E1
-:104920009122000D2C4200061040000400000000FF
-:104930009122000D24420001A122000D0A0010F96D
-:10494000000000003C0380083C028000344201006B
-:1049500034640080346301009045000A8C480014E0
-:104960008C8900389062000C30AA00FF01281823BF
-:10497000304700FF1C60000E2CE4000624020001FA
-:1049800000E210041080000A30430003014020219F
-:10499000010028210120302114600007304B000C59
-:1049A000156000073042003014400007000000008E
-:1049B00003E00008000000000A0011900000000061
-:1049C0000A00112A000000000A0012030000000083
-:1049D0003C0380083464010024020003A082000C20
-:1049E0008C62000403E00008AC82001C3C058008D7
-:1049F00034A300809062002734A501002406004300
-:104A000024420001A0620027906300273C020800B6
-:104A10008C420048306300FF146200043C076021B0
-:104A200094A500DA0A0008EE30A5FFFF03E00008B5
-:104A30000000000027BDFFE8AFBF00103C0280006F
-:104A40000E0012498C4401803C028008344301006E
-:104A5000A060000C8C4200048FBF001027BD00181E
-:104A600003E00008AC62001C27BDFFE03C028008A8
-:104A7000AFBF0018AFB10014AFB0001034450080D4
-:104A8000344601003C0880008D09014090C3000CB1
-:104A90008CA4003C8CA2003814820038306700FFE0
-:104AA0009502007C90A30027146000093045FFFFA9
-:104AB0002402000554E200083C04800890C2000D66
-:104AC00024420001A0C2000D0A0012843C048008A8
-:104AD000A0C0000D3C048008348201009042000C0C
-:104AE00024030005304200FF1443000A24A205DC21
-:104AF00034830080906200272C420007504000055C
-:104B000024A20A009063002724020014006210040B
-:104B100000A210213C108008361000803045FFFFB5
-:104B2000012020210E001249A60500149602005C07
-:104B30008E0300383C1180003042FFFF000210401D
-:104B400000621821AE03001C0E0003158E240140E4
-:104B50009202002534420040A20200250E000320EC
-:104B60008E2401408E2401408FBF00188FB10014A5
-:104B70008FB000100A000F4827BD00208FBF00181B
-:104B80008FB100148FB0001003E0000827BD002093
-:104B90008008010080080080800800008008024032
-:104BA00008000EF008000F4808000F8C08001020C5
-:104BB0000800106480080100800800808008000060
-:104BC0000A00002000000000000000000000000DAE
-:104BD0006370342E362E31370000000004061104B5
-:104BE00000000000000000000000000000000000C5
-:104BF0000000000038003C00000000000000000041
-:104C00000000000000000000000000200000000084
-:104C10000000000000000000000000000000000094
-:104C20000000000000000000000000000000000084
-:104C30000000000021003800000000010000002BEF
-:104C40000000000010000003000000000000000D44
-:104C50000000000D3C020800244255C43C0308003B
-:104C6000246357F4AC4000000043202B1480FFFD68
-:104C7000244200043C1D080037BD9FFC03A0F02126
-:104C80003C100800261000803C1C0800279C55C4DE
-:104C90000E00026A000000000000000D00A01821B4
-:104CA00000801021008028213C0460003C07600047
-:104CB0002406000810600006348420788C4200002E
-:104CC000ACE220088C63000003E00008ACE3200C99
-:104CD0000A000E1C00000000240300403C0260009B
-:104CE00003E00008AC4320003C0760008F86000012
-:104CF0008CE520740086102100A2182B1460000798
-:104D0000000028218F8AFDEC24050001A144001336
-:104D10008F89000001244021AF88000003E00008D3
-:104D200000A010218F84FDEC8F8500009086001379
-:104D300030C300FF00A31023AF82000003E000088F
-:104D4000A08000138F84FDEC27BDFFE8AFB00010FA
-:104D5000AFBF001490890011908700112402002831
-:104D6000312800FF3906002830E300FF2485002C9D
-:104D70002CD00001106200162484001C0E000037A5
-:104D8000000000008F8FFDEC3C056000240202044F
-:104D900095EE003E95ED003C000E5C0031ACFFFF4F
-:104DA000016C5025ACAA201052000001240200041E
-:104DB000ACA2200000000000000000000000000085
-:104DC0008FBF00148FB0001003E0000827BD00184B
-:104DD0000A00006F000028218F85FDEC27BDFFD859
-:104DE000AFBF0020AFB3001CAFB20018AFB10014CA
-:104DF000AFB000100080982190A4001124B0001CD6
-:104E000024B1002C308300FF386200280E000059C6
-:104E10002C5200010E000061000000000200202161
-:104E20001240000202202821000028210E00003735
-:104E3000000000008F8DFDEC3C0880003C05600008
-:104E400095AC003E95AB003C02683025000C4C0050
-:104E5000316AFFFF012A3825ACA720102402020284
-:104E6000ACA6201452400001240200028FBF002093
-:104E70008FB3001C8FB200188FB100148FB00010D8
-:104E800027BD002803E00008ACA2200027BDFFE0FA
-:104E9000AFB20018AFB10014AFB00010AFBF001C2C
-:104EA0003C1160008E2320748F82000030D0FFFF01
-:104EB00030F2FFFF1062000C2406008F0E00003756
-:104EC000000000003C06801F0010440034C5FF00B5
-:104ED0000112382524040002AE27201000003021E2
-:104EE000AE252014AE2420008FBF001C8FB2001806
-:104EF0008FB100148FB0001000C0102103E0000833
-:104F000027BD002027BDFFE0AFB0001030D0FFFF6D
-:104F1000AFBF0018AFB100140E00003730F1FFFF33
-:104F200000102400009180253C036000AC7020102C
-:104F30008FBF00188FB100148FB00010240200043E
-:104F4000AC62200027BD002003E000080000102113
-:104F500027BDFFE83C0C6018AFBF00108D985000D3
-:104F60002419FF7F3C0880000319782435EE380CA3
-:104F7000340D8071240A003124090C00AD8E5000DC
-:104F80003C0B800AAD8D53BCAD0A0008AD0900246E
-:104F90000E00048DAF8B002C0E00044B00000000AF
-:104FA0000E000046000000003C0760008CE5080889
-:104FB0002406FFF03C03570900A620243462F000C9
-:104FC00010820048241F0001AF8000380E000BAE95
-:104FD000000000003C0660168CC700003C0860140E
-:104FE0008D0500A03C03FFFF00E320243C02535347
-:104FF00000051FC21082003534C57C0094A201F266
-:10500000A780005010400003A7800060384C1E1E8F
-:10501000A78C005094A201F8104000048F8E003835
-:10502000384D1E1EA78D00608F8E003811C0000401
-:1050300097840060240F0020A78F005097840060A1
-:105040002C980081530000012404008097850050B3
-:105050002CB9040153200001240504003C03600026
-:105060008C670438241F103C30E2FFFF105F000300
-:105070003088FFFF5100000B24060050A38000621F
-:10508000938900621120000B8FBF001027BD00180C
-:10509000A7800060A7800050A780005803E00008A8
-:1050A000A7800076A3860062938900621520FFF72F
-:1050B0008FBF001027BD0018A7840060A78500508F
-:1050C000A780005803E00008A780007600035880FE
-:1050D000016650218D4900043C0660000A00010F62
-:1050E000012628210A000103AF9F00383083FFFF0B
-:1050F0008F88002C8F870028000321403C0580000A
-:105100003C020050008248253C0660003C0A010039
-:1051100034AC04008CCD08E001AA582411600005CD
-:10512000000000008CCF08E024E7000101EA7025B0
-:10513000ACCE08E08D19001001805821ACB90038C0
-:105140008D180014ACB8003CACA900300000000081
-:10515000000000000000000000000000000000004F
-:105160000000000000000000000000003C03800080
-:105170008C640000308200201040FFFD3C0F600076
-:105180008DED08E03C0E010001AE18241460FFE133
-:1051900000000000AF87002803E00008AF8B003C50
-:1051A0008F85002C240BFFF03C06800094A7001A8A
-:1051B0008CA9002430ECFFFF000C38C000EB502419
-:1051C000012A4021ACC8003C8CA400248CC3003CC4
-:1051D0000083102318400033000000008CAD002035
-:1051E00025A200013C0F0050ACC2003835EE001083
-:1051F0003C068000ACCE0030000000000000000043
-:10520000000000000000000000000000000000009E
-:1052100000000000000000003C0480008C990000A9
-:10522000333800201300FFFD30E200081040001763
-:105230003C0980008C880408ACA800108C83040C06
-:10524000ACA300143C1900203C188000AF190030BA
-:1052500094AE001894AF001C01CF3021A4A6001812
-:1052600094AD001A25A70001A4A7001A94AB001A58
-:1052700094AC001E118B00030000000003E0000846
-:105280000000000003E00008A4A0001A8D2A04001A
-:10529000ACAA00108D240404ACA400140A0001A2DE
-:1052A0003C1900208CA200200A00018A3C0F00500B
-:1052B0000A000178000000003C0308008C63002015
-:1052C0008F82003427BDFFE810620008AFBF0010D6
-:1052D0000E0001BCAF8300343C0308008C63002047
-:1052E00024040001106400048F8C002C8FBF001078
-:1052F00003E0000827BD00188FBF00103C058000A8
-:10530000A580000A958B000A958A000427BD001825
-:105310003167FFFF3149000F0009450000E83025E3
-:1053200003E00008ACA600803C0208008C4200208C
-:1053300027BDFFC8AFBF0034AFBE0030AFB7002CF1
-:10534000AFB60028AFB50024AFB40020AFB3001C47
-:10535000AFB20018AFB1001410400053AFB000104E
-:105360008F84002C948600069483000A00C32823AF
-:1053700030B6FFFF12C0004D8FBF00349489001873
-:10538000948A000A012A40233102FFFF02C2382B0F
-:1053900014E0000202C02021004020212C8C0005D6
-:1053A000158000020080A021241400040E00014B8F
-:1053B000028020218F87002C02809821AF8000304E
-:1053C00094ED000A028088211280005131B2FFFF63
-:1053D0003C1770003C1540003C1E60008F8F003C65
-:1053E0008DEE000001D718245075005302202021B3
-:1053F00002A3802B160000383C1820001078004AC9
-:1054000000000000241000018F8300301460003C75
-:10541000029158230230F8230250C82133F1FFFFD4
-:105420001620FFEE3332FFFF8F87002C3C12002046
-:105430003C118000AE32003094EA000A3C17800034
-:10544000026A4821A4E9000A94E3000A94E80004EF
-:105450003065FFFF3106000F0006150000A2F025A1
-:10546000AEFE008094F4000A94F5001812B4003ADD
-:105470000013C9408CF800148CEE00100319582159
-:10548000000078210179682B01CF6021018D202156
-:10549000ACEB0014ACE4001002D3382330F6FFFF6D
-:1054A00016C0FFB68F84002C8FBF00348FBE003033
-:1054B0008FB7002C8FB600288FB500248FB4002042
-:1054C0008FB3001C8FB200188FB100148FB0001082
-:1054D00003E0000827BD0038107E001B000000001C
-:1054E0001477FFC9241000010E0014E00000000032
-:1054F0008F8300301060FFC80230F82302915823D8
-:105500008F87002C017020210A0002553093FFFF85
-:105510008F8300301460FFC83C1200203C118000D3
-:105520000A00021EAE3200300E0003CE02202021FF
-:105530000A000212004080210E0007C60240282106
-:105540000A000212004080210E000D7D0220202161
-:105550000A000212004080210E00017800000000C5
-:105560000A00023702D3382327BDFFD0AFB500248D
-:10557000AFB40020AFB3001CAFB20018AFB100143D
-:10558000AFB00010AFBF00280E0000E43C14800054
-:105590003C0280083C0320003C010800AC20007065
-:1055A00034550080347200032413000136900070DB
-:1055B0002411FF800A0002858E0600003C1980003D
-:1055C0008F3800003B0F000131E200011040002540
-:1055D0008F8600848E0700003C0D08008DAD003CD6
-:1055E0003C0A08008D4A003800E6702301AE4021D5
-:1055F00000005821010E302B014B482101262021AB
-:105600003C010800AC28003CAF8700843C01080046
-:10561000AC2400380E0001BE000000003C0508006C
-:105620008CA5007010A0FFE500A020213C0508001B
-:105630008CA500683C0608008CC6006C0E00148324
-:10564000000000003C010800AC2000703C19800004
-:105650008F3800003B0F000131E200011440FFDDF4
-:105660008F8600848E0C00008F8D00843C0708001C
-:105670008CE7003C3C0608008CC60038018D58239E
-:1056800000EB282100AB202B00C24821012410216F
-:105690003C010800AC25003C3C0880003C010800AF
-:1056A000AC2200388D030100241F0C00107F00265F
-:1056B000000000008D180100240E0020AD1800200D
-:1056C00092AF000031E300FF106E00232419005058
-:1056D00010790026000000003C0480008C88010046
-:1056E0001500000300000000566000143C04400058
-:1056F0008C9901008C8F0100000098210331C02497
-:105700000018694031EE007F01AE602501925825F6
-:10571000AC8B08308C8701008C89010024EA0100E1
-:1057200001513024000629403123007F00A31025B9
-:105730000052F825AC9F08303C044000AE8401388C
-:105740000A00027D000000000E0001DA00000000E7
-:105750000A0002C73C0480008D0401000E00077F90
-:10576000000000000A0002C73C0480008D04010014
-:105770000E00139B000000000A0002C73C048000DA
-:1057800000A4102B24030001104000090000302168
-:105790000005284000A4102B04A0000300031840BB
-:1057A0005440FFFC000528405060000A0004182BFC
-:1057B0000085382B54E000040003184200C3302554
-:1057C00000852023000318421460FFF900052842D9
-:1057D0000004182B03E0000800C310213084FFFFF1
-:1057E00030C600FF3C0780008CE201B80440FFFE99
-:1057F00000064C00012430253C08200000C820256C
-:105800003C031000ACE00180ACE50184ACE401880D
-:1058100003E00008ACE301B83C0660008CC5201C26
-:105820002402FFF030830200308601001060000E79
-:1058300000A2282434A500013087300010E00005C4
-:1058400030830C0034A500043C04600003E0000831
-:10585000AC85201C1060FFFD3C04600034A50008EE
-:1058600003E00008AC85201C54C0FFF334A50002FF
-:105870000A00031F3087300027BDFFE8AFB00010DB
-:10588000AFBF00143C076000240600021080001126
-:1058900000A080218F83003C0E0003168C6400184A
-:1058A0008F82003C00002021240600018C45000C62
-:1058B0000E0003070000000016000002240200038F
-:1058C000000010218FBF00148FB0001003E000080B
-:1058D00027BD00188CE8201C2409FFF001092824AA
-:1058E000ACE5201C8F87003C0A00033C8CE5000CD3
-:1058F0003C02600E0080402134460100240900185B
-:105900000000000000000000000000003C0A005001
-:105910003C03800035470200AC6800383464040062
-:10592000AC65003CAC6700308C6C0000318B002013
-:105930001160FFFD2407FFFF2403007F8C8D000012
-:105940002463FFFF24840004ACCD00001467FFFB38
-:1059500024C6000400000000000000000000000059
-:1059600024A402000085282B3C0300203C0E80006C
-:105970002529FFFF01054021ADC300301520FFE0C0
-:105980000080282103E00008000000008F82003C16
-:1059900027BDFFD8AFB3001CAFBF0020AFB20018C7
-:1059A000AFB10014AFB000109446000200809821FF
-:1059B0008C5200182CC300818C4800048C470008CE
-:1059C0008C51000C8C490010106000078C4A0014A8
-:1059D0002CC400041480001330EB000730C5000312
-:1059E00010A00010000000002410008B02002021F5
-:1059F000022028210E00030724060003166000027F
-:105A000024020003000010218FBF00208FB3001C70
-:105A10008FB200188FB100148FB0001003E000089F
-:105A200027BD00281560FFF12410008B3C0C80007E
-:105A30003C030020241F0001AD830030AF9F0030E5
-:105A40000000000000000000000000002419FFF02A
-:105A500024D8000F031978243C1000D0AD880038FA
-:105A600001F0702524CD00033C08600EAD87003C9A
-:105A700035850400AD8E0030000D38823504003CC1
-:105A80003C0380008C6B0000316200201040FFFD61
-:105A90000000000010E0000824E3FFFF2407FFFFE0
-:105AA0008CA800002463FFFF24A50004AC8800003C
-:105AB0001467FFFB248400043C04600EAC860038AD
-:105AC0000000000000000000000000003C07002073
-:105AD0003C0680000120202101402821ACC7003075
-:105AE0000E00034C000080210E000316024020210E
-:105AF0000A00038C0200202127BDFFD8AFB2001896
-:105B00003092FFFFAFB10014AFBF0020AFB3001C55
-:105B1000AFB000101240002D000088210A0003E2FF
-:105B20002413000350B300428CE5000C0000000D6C
-:105B3000263900013331FFFF24F800200232382BD0
-:105B400010E00022AF98003C8F8200301440001F0C
-:105B50008F87003C3C0670003C0320008CE4000072
-:105B60000086282414A300198F85004400044402F1
-:105B70003C0980000089802414A0FFEA310600FF60
-:105B8000240A000210CA003028CB0003116000175D
-:105B9000000000002404000114C4FFE626390001BF
-:105BA000020028210E00032E240400018F87003CF0
-:105BB000AF820044263900013331FFFF24F8002072
-:105BC0000232382B14E0FFE0AF98003C0220102195
-:105BD0008FBF00208FB3001C8FB200188FB100144C
-:105BE0008FB0001003E0000827BD002810D3001B71
-:105BF000240C000414CCFFCF26390001308DFFFFA8
-:105C0000000D19C03C0480008C8E01B805C0FFFE59
-:105C10003C0F10003C102004AC830180AC80018458
-:105C2000AC900188AC8F01B80A0003DD2639000171
-:105C30000E000307240400841600FFBD8F87003C7C
-:105C40000A0003DCAF800044020028210E00032E6E
-:105C5000000020210A0003FC8F87003C0E00037324
-:105C6000020020218F87003C0A0003FDAF82004420
-:105C7000000449C23127003F000443423C02800037
-:105C800000082040240316802CE60020AC43002CA2
-:105C900024EAFFE02482000114C0000330A900FFC1
-:105CA00000801021314700FF000260803C0D800021
-:105CB000240A0001018D20213C0B000E00EA28047B
-:105CC000008B302111200005000538278CCE000004
-:105CD00001C5382503E00008ACC700008CD80000DF
-:105CE0000307782403E00008ACCF000027BDFFE0E5
-:105CF000AFB10014AFB00010AFBF00183C07600098
-:105D00008CE408083402F0003C1160003083F0009D
-:105D1000240501C03C04800E000030211062000602
-:105D2000241000018CEA08083149F0003928E0000D
-:105D30000008382B000780403C0D0200AE2D0814EF
-:105D4000240C16803C0B80008E2744000E000E268B
-:105D5000AD6C002C120000043C02169124050001D9
-:105D6000120500103C023D6C345800E0AE38440887
-:105D70003C1108008E31007C8FBF00183C0660008B
-:105D800000118540360F16808FB100148FB00010BF
-:105D90003C0E020027BD0020ACCF442003E00008E9
-:105DA000ACCE08103C0218DA345800E0AE38440893
-:105DB0003C1108008E31007C8FBF00183C0660004B
-:105DC00000118540360F16808FB100148FB000107F
-:105DD0003C0E020027BD0020ACCF442003E00008A9
-:105DE000ACCE08100A00042C240500010A00042C83
-:105DF0000000282124020400A782000CA7800004D0
-:105E0000000020213C06080024C656582405FFFF48
-:105E100024890001000440803124FFFF010618217D
-:105E20002C87002014E0FFFAAC6500002404040075
-:105E3000A784000EA7800006000020213C06080071
-:105E400024C656D82405FFFF248D0001000460807D
-:105E500031A4FFFF018658212C8A00201540FFFA4B
-:105E6000AD650000A7800010A7800008A780000A89
-:105E7000000020213C06080024C657582405FFFFD7
-:105E8000249900010004C0803324FFFF0306782119
-:105E90002C8E000415C0FFFAADE500003C05600043
-:105EA0008CA73D002403E08F00E31024344601401A
-:105EB00003E00008ACA63D002487007F000731C244
-:105EC00024C5FFFF000518C2246400013082FFFFD3
-:105ED000000238C0A78400183C010800AC2700303D
-:105EE000AF80001400002821000020210000302194
-:105EF0002489000100A728213124FFFF2CA81701C5
-:105F0000110000032C8300801460FFF924C60001F7
-:105F100000C02821AF86001410C0001DA786001203
-:105F200024CAFFFF000A11423C0808002508575800
-:105F30001040000A00002021004030212407FFFF0C
-:105F4000248E00010004688031C4FFFF01A8602195
-:105F50000086582B1560FFFAAD87000030A2001FA5
-:105F60005040000800043080240300010043C804AE
-:105F700000041080004878212738FFFF03E0000864
-:105F8000ADF8000000C820212405FFFFAC8500000B
-:105F900003E000080000000030A5FFFF30C6FFFF4F
-:105FA00030A8001F0080602130E700FF0005294273
-:105FB0000000502110C0001D24090001240B000125
-:105FC00025180001010B2004330800FF0126782664
-:105FD000390E00202DED00012DC2000101A218256F
-:105FE0001060000D014450250005C880032C40219D
-:105FF0000100182110E0000F000A20278D04000086
-:10600000008A1825AD03000024AD000100004021E6
-:106010000000502131A5FFFF252E000131C9FFFFEF
-:1060200000C9102B1040FFE72518000103E000080D
-:10603000000000008D0A0000014440240A000512FF
-:10604000AC68000027BDFFE830A5FFFF30C6FFFFAA
-:10605000AFB00010AFBF001430E7FFFF00005021C9
-:106060003410FFFF0000602124AF001F00C0482152
-:10607000241800012419002005E0001601E0102179
-:106080000002F943019F682A0009702B01AE4024E9
-:1060900011000017000C18800064102110E00005AA
-:1060A0008C4B000000F84004000838230167582496
-:1060B00000003821154000410000402155600016C5
-:1060C0003169FFFF258B0001316CFFFF05E1FFEC1B
-:1060D00001E0102124A2003E0002F943019F682A3A
-:1060E0000009702B01AE40241500FFEB000C188056
-:1060F000154600053402FFFF020028210E0004F6B9
-:1061000000003821020010218FBF00148FB0001052
-:1061100003E0000827BD00181520000301601821C6
-:10612000000B1C0224080010306A00FF1540000517
-:10613000306E000F250D000800031A0231A800FF81
-:10614000306E000F15C00005307F000325100004DD
-:1061500000031902320800FF307F000317E000053A
-:10616000386900012502000200031882304800FF50
-:10617000386900013123000110600004310300FF81
-:10618000250A0001314800FF310300FF000C69407F
-:1061900001A34021240A000110CAFFD53110FFFFDE
-:1061A000246E000131C800FF1119FFC638C9000173
-:1061B0002D1F002053E0001C258B0001240D000141
-:1061C0000A000589240E002051460017258B000186
-:1061D00025090001312800FF2D090020512000125F
-:1061E000258B000125430001010D5004014B1024B3
-:1061F000250900011440FFF4306AFFFF3127FFFF3B
-:1062000010EE000C2582FFFF304CFFFF00005021F4
-:106210003410FFFF312800FF2D0900205520FFF228
-:1062200025430001258B0001014648260A0005434D
-:10623000316CFFFF00003821000050210A00059555
-:106240003410FFFF27BDFFD8AFB0001030F0FFFFC4
-:10625000AFB10014001039423211FFE00007108086
-:10626000AFB3001C00B1282330D3FFFFAFB200183A
-:1062700030A5FFFF008090210260302100442021E2
-:10628000AFBF00200E0005213207001F0222882127
-:106290003403FFFF02402021020028210260302148
-:1062A00000003821104300093231FFFF0220102185
-:1062B0008FBF00208FB3001C8FB200188FB1001465
-:1062C0008FB0001003E0000827BD00280E00052154
-:1062D0000000000000408821022010218FBF002014
-:1062E0008FB3001C8FB200188FB100148FB0001054
-:1062F00003E0000827BD0028000424003C036000E0
-:10630000AC603D0810A000023482100634821016E2
-:1063100003E00008AC623D0427BDFFE0AFB0001011
-:10632000309000FF2E020006AFBF0018104000089A
-:10633000AFB10014001030803C030800246353B454
-:1063400000C328218CA40000008000080000000089
-:10635000000020218FBF00188FB100148FB00010F3
-:106360000080102103E0000827BD00209791001253
-:1063700016200051000020213C020800904200330A
-:106380000A0005FC00000000978D000E15A00031EA
-:10639000000020210A0005FC240200089787000C59
-:1063A00014E0001A000018210060202124020001DE
-:1063B0001080FFE98FBF0018000429C2004530217A
-:1063C00000A6582B1160FFE43C0880003C07200029
-:1063D000000569C001A76025AD0C00203C038008C2
-:1063E0002402001F2442FFFFAC6000000441FFFDB7
-:1063F0002463000424A5000100A6702B15C0FFF53E
-:10640000000569C00A0005E68FBF001897870004E1
-:106410003C04080024845658240504000E0005A1FD
-:1064200024060001978B000C24440001308AFFFFF2
-:106430002569FFFF2D480400004028211500004079
-:10644000A789000C24AC3800000C19C00A0005FA1A
-:10645000A7800004978700063C040800248456D8CF
-:10646000240504000E0005A1240600019799000EE2
-:10647000244400013098FFFF272FFFFF2F0E040058
-:106480000040882115C0002CA78F000EA7800006B1
-:106490003A020003262401003084FFFF0E0005CEDF
-:1064A0002C4500010011F8C027F00100001021C0A8
-:1064B0000A0005FC24020008978500169787000A49
-:1064C0003C040800248457580E0005A1240600014E
-:1064D000978700128F8900142445000130A8FFFF20
-:1064E00024E3FFFF0109302B0040802114C0001875
-:1064F000A7830012A780000A978500180E000E10CF
-:1065000002002021244A05003144FFFF0E0005CE81
-:10651000240500013C05080094A500320E000E1071
-:1065200002002021244521003C0208009042003353
-:106530000A0005FC000521C00A000634A7840006F5
-:1065400024AC3800000C19C00A0005FAA784000426
-:106550000A00064EA785000A308400FF27BDFFE829
-:106560002C820006AFBF0014AFB000101040001521
-:1065700000A03821000440803C030800246353CC71
-:10658000010328218CA40000008000080000000006
-:1065900024CC007F000751C2000C59C23170FFFFAC
-:1065A0002547C40030E5FFFF2784000402003021A6
-:1065B0000E0004F624070001978600100206202131
-:1065C000A78400108FBF00148FB0001003E00008F4
-:1065D00027BD00183C0508008CA50030000779C2D3
-:1065E0000E0002F025E4DF003045FFFF3C04080008
-:1065F00024845758240600010E0004F624070001E5
-:10660000978E00128FBF00148FB0001025CD0001AF
-:1066100027BD001803E00008A78D00120007C9C2BB
-:106620002738FF00001878C231F0FFFF3C04080053
-:10663000248456D802002821240600010E0004F606
-:1066400024070001978D000E260E0100000E840025
-:1066500025AC00013C0B6000A78C000EAD603D082E
-:1066600036040006000030213C0760008CE23D0447
-:10667000305F000617E0FFFD24C9000100061B0083
-:10668000312600FF006440252CC50004ACE83D0421
-:1066900014A0FFF68FBF00148FB0001003E00008B5
-:1066A00027BD0018000751C22549C8002406000173
-:1066B000240700013C040800248456580E0004F608
-:1066C0003125FFFF9787000C8FBF00148FB000109B
-:1066D00024E6000127BD001803E00008A786000C8F
-:1066E0003084FFFF30A5FFFF3C0680008CC201B85C
-:1066F0000440FFFE3C084080008838253C03100021
-:10670000ACC00180ACC50184ACC7018803E00008BF
-:10671000ACC301B83084FFFF3C0680008CC201B8D6
-:106720000440FFFE3C0840388CA700000088282564
-:106730003C031000ACC70180ACC5018803E0000831
-:10674000ACC301B88F83005C8F8600541066000BC9
-:10675000008040213C07080024E75768000328C058
-:1067600000A710218C44000024630001108800055C
-:106770003063000F5466FFFA000328C003E00008EE
-:10678000000010213C07080024E7576C00A73021C7
-:1067900003E000088CC200003C039000346200015A
-:1067A000008220253C038000AC6400208C65002022
-:1067B00004A0FFFE0000000003E00008000000004D
-:1067C0003C028000344300010083202503E00008E0
-:1067D000AC44002027BDFFE0AFB100143091FFFFB3
-:1067E000AFB00010AFBF00181220001200A080212F
-:1067F0008CA5000014A00011240400023C068000B7
-:106800008CC201B80440FFFE3C074000022720254F
-:106810008FBF00188FB100148FB000103C03100020
-:1068200027BD0020ACC50180ACC4018803E000088E
-:10683000ACC301B80A00070F8CA500000E00066665
-:1068400024060200000028210A00070FAE00000005
-:106850003087FFFF3C0680008CC201B80440FFFE79
-:106860003C0A40068CA9000000EA4025ACC9018022
-:106870008CA400043C031000ACC40184ACC80188A3
-:1068800003E00008ACC301B88F83FDE827BDFFE833
-:10689000AFBF0014AFB00010906700080080102157
-:1068A0000080282130E600400000202110C00008B0
-:1068B0008C5000000E0000860200202102002021E2
-:1068C0008FBF00148FB000100A00048927BD001884
-:1068D0000E000724000000000E00008602002021A8
-:1068E000020020218FBF00148FB000100A0004891D
-:1068F00027BD001827BDFFE0AFB000108F90FDE866
-:10690000AFBF001CAFB20018AFB100149206000177
-:10691000008088210E0006F630D2000492040005A3
-:10692000001129C2A605000034830040A20300051F
-:106930000E000700022020210E00048B02202021DF
-:1069400024020001AE02000C02202821A602001041
-:1069500024040002A602001224060200A60200146B
-:106960000E000666A60200161640000F8FBF001C20
-:10697000978C00583C0B08008D6B00782588FFFF32
-:106980003109FFFF256A0001012A382B10E00006BB
-:10699000A78800583C0F6006240E001635ED001045
-:1069A000ADAE00508FBF001C8FB200188FB1001425
-:1069B0008FB0001003E0000827BD002027BDFFE0D6
-:1069C000AFBF0018AFB10014AFB000100E0006F654
-:1069D000008088218F85FDE80220202190A30005FA
-:1069E0000E000700307000FF2402003E1202000576
-:1069F0008FBF00188FB100148FB0001003E00008A3
-:106A000027BD00203C0580008CA401780480FFFE97
-:106A1000240700073C061000ACB1014002202021F1
-:106A2000A0A701448FBF00188FB100148FB00010D1
-:106A3000ACA601780A00074D27BD002027BDFFE066
-:106A4000AFB00010AFBF0018AFB100143C10800011
-:106A50008E110020000000000E00048BAE04002008
-:106A6000AE1100208FBF00188FB100148FB000103E
-:106A700003E0000827BD00203084FFFF3C068000B3
-:106A80008CC201B80440FFFE3C0840350088382520
-:106A90003C031000ACC50180ACC00184ACC70188C8
-:106AA00003E00008ACC301B83084FFFF3C0680005F
-:106AB0008CC201B80440FFFE3C08403600883825EF
-:106AC0003C031000ACC50180ACC00184ACC7018898
-:106AD00003E00008ACC301B827BDFFD0AFB5002468
-:106AE0003095FFFFAFB60028AFB40020AFBF002C39
-:106AF000AFB3001CAFB20018AFB10014AFB00010BC
-:106B000030B6FFFF12A000270000A0218F92003CAA
-:106B10008E4300003C0680002402004000033E0239
-:106B200000032C0230E4007F006698241482001DCC
-:106B300030A500FF8F83004C2C68000A5100001024
-:106B40008F860030000358803C0C0800258C53E8E9
-:106B5000016C50218D490000012000080000000058
-:106B600002D448213125FFFF0E0006C8240400840A
-:106B7000166000028F92003CAF80004C8F86003080
-:106B800026580020268F00010300902131F4FFFFDA
-:106B900014C00004AF98003C0295282B14A0FFDC21
-:106BA00000000000028010218FBF002C8FB600284B
-:106BB0008FB500248FB400208FB3001C8FB2001853
-:106BC0008FB100148FB0001003E0000827BD003023
-:106BD0002407003414A70146000000009247000E6D
-:106BE0008F99FDEC8F90FDE824181600A32700195B
-:106BF000924A000D3C0880003C07800CA32A001834
-:106C0000964400123C0F60003C117FFFA604005C1C
-:106C1000965F00103622FFFF240A000533E5FFFFD0
-:106C2000AE0500548E46001CAD1800288CE900000B
-:106C30008DEE44480126682601CD3021AE0600388D
-:106C40008E03003824CB00013C0E7F00AE03003CD5
-:106C50008E0C003CAF2C0004AE0B00208E130020E5
-:106C6000AE13001CA320001BAE02002CA32A0012AE
-:106C70008E44001424130050AE0400348E1F0034E0
-:106C8000AF3F00148E450018AE0500489258000C26
-:106C9000A218004E920F000835E90020A209000852
-:106CA0008E0D001801AE1824346C4000AE0C001894
-:106CB000920B0000317200FF125302AD2413FF80CB
-:106CC0003C040800248457E80E000732000000004E
-:106CD00024030004240800013C0508008CA557E8A3
-:106CE0003C048000A2030025A20800058C900178D6
-:106CF0000600FFFE8F92003C240E00023C0D1000A7
-:106D0000AC850140A08E0144AC8D01780A0007EFEC
-:106D1000AF80004C2CAD003711A0FF998F8600305A
-:106D2000000580803C1108002631541002117821A2
-:106D30008DEE000001C000080000000024100004D7
-:106D400014B0008E3C0780003C0C08008D8C57E886
-:106D50008F86FDE8ACEC00208E4B00088F98FDEC90
-:106D600024090050ACCB00308E430008ACC3005067
-:106D70008E42000CACC200348E4A0010ACCA0038FF
-:106D80008E440010ACC400548E5F0014ACDF003C95
-:106D90008E590018AF1900048E4F001CACCF002094
-:106DA00090D10000322500FF10A9027D00000000F4
-:106DB0008CD100348CCF0030022F302304C000F37C
-:106DC0002404008C126000F0240200030A0007EF84
-:106DD000AF82004C2418000514B800683C0B8000FA
-:106DE0003C0C08008D8C57E88F86FDE8AD6C0020C8
-:106DF0008E4300048F9FFDEC24072000ACC3001CD1
-:106E00009242000824120008A3E200198F8A003C75
-:106E100091440009A3E400188F85003C90B9000A52
-:106E2000332400FF1092001028880009150000BCD0
-:106E3000240D0002240900201089000B3407800073
-:106E4000289100211620000824074000240F00404C
-:106E5000108F00053C0700012418008010980002E4
-:106E60003C070002240740008CC400183C0AFF00C5
-:106E7000008AF82403E7C825ACD9001890B2000BAB
-:106E8000A0D200278F83003C9465000C10A0023133
-:106E9000000000009467000C3C1F8000A4C7005C49
-:106EA0009062000E2403FFBF24070004A0C2000864
-:106EB0008F8A003C9144000FA0C400098F88003CD9
-:106EC0008D1200108FF9007402592823ACC50058A8
-:106ED0008D180014ACD8002C950F001831F1FFFF6D
-:106EE000ACD100409509001A3130FFFFACD000440E
-:106EF0008D0E001CACCE0048950D0002A4CD00788C
-:106F0000910C000EA0CC000890CB00080163102467
-:106F1000126001D7A0C200088F92003C0A0007EF60
-:106F2000AF87004C2406000614A600143C0E800017
-:106F30003C1008008E1057E88F8CFDE4ADD0002087
-:106F40008E4D00188F86FDE88F8BFDECAD8D000017
-:106F50008CC8003824040005AD8800048CC3003CB4
-:106F600012600081AD6300000A0007EFAF84004C9F
-:106F70002409000710A9004B240400063C05080062
-:106F800024A557E80E000705240400818F92003CD9
-:106F90000013102B0A0007EFAF82004C241F0023C0
-:106FA00014BFFFF63C0C80003C0308008C6357E8DC
-:106FB0008F8BFDECAD8300208F91FDE88E460004A1
-:106FC0002564002026450014AE2600282406000370
-:106FD0000E000E1C257000308F87003C020020211F
-:106FE000240600030E000E1C24E500083C040800E3
-:106FF000248457E80E0007320000000092220000AF
-:1070000024040050304A00FF5544FFE18F92003CB9
-:107010000E000E07000000000A0008F48F92003CEA
-:107020002408003314A800323C0280003C11080000
-:107030008E3157E88F89FDECAC5100208E4A000854
-:10704000240F00288F8DFDE8AD2A00308E44000CFF
-:1070500024060009AD2400348E5F0010AD3F0038D7
-:107060008E590014AD3900208E450018AD2500243E
-:107070008E58001CAD380028A12F00118E4E000440
-:1070800012600031ADAE00288F92003C0A0007EF7D
-:10709000AF86004C2411002214B1FFB8000000009C
-:1070A000240400073C1808008F1857E83C0F8000A4
-:1070B000ADF800205660FEB1AF84004C3C040800DF
-:1070C000248457E80E000732241300508F99FDE8FE
-:1070D00093320000324500FF10B3016C0000000045
-:1070E0008F92003C000020210A0007EFAF84004C83
-:1070F0003C05080024A557E80E0006D524040081AD
-:107100000A0008F48F92003C02D498213265FFFFF8
-:107110000E0006C8240400840A0007EF8F92003C8A
-:10712000108DFF51240704002887000310E001AAF6
-:1071300024100004240E0001548EFF4B240740004D
-:107140000A0008AA240701003C05080024A557E806
-:107150000E000724240400828F92003C000030219E
-:107160000A0007EFAF86004C3C040800248457E86F
-:107170008CC200380E0007328CC3003C8F92003C5A
-:107180000A00094A00002021240400823C0508006E
-:1071900024A557E80E000724000000008F92003C51
-:1071A000000010210A0007EFAF82004C8E5000044F
-:1071B0008F91FDE83C0A8000AD500020922200052E
-:1071C000020028213046000214C001872404008AEE
-:1071D0008F92FDEC020028212404008D924B001BAD
-:1071E000316300201460018000000000922D00092E
-:1071F000240C001231A800FF110C017B2404008133
-:107200000E0006F6020020219245001B240E000409
-:107210000200202134A90042A249001B0E000700F1
-:10722000A22E00253C0480008C9101780620FFFEF0
-:1072300024180002AC900140A09801448F92003CB9
-:107240003C0F1000AC8F01780A0008F50013102BDA
-:107250008E5000048F91FDE83C1F8000AFF00020AD
-:1072600092390005020028213327000214E0001A99
-:107270002404008A922600092412001230C400FF60
-:10728000109201110000000092230009240A00045A
-:10729000306200FF104A010C000000000E0006F6EC
-:1072A000020020218F88FDEC240CFFFE020020212B
-:1072B000910E001B35CD0020A10D001BA23200094C
-:1072C000922B0005016C90240E000700A2320005ED
-:1072D00002002821000020210E0007BA0000000053
-:1072E0000A0008F48F92003C8E5100043C0280009A
-:1072F0003C100800261057E8AC5100203C01080063
-:10730000AC3157E89246000330C400041080016994
-:107310008F84FDE824020006A0820009924D001B24
-:107320002408FFC031AC003F01885825A08B00081D
-:1073300092430003306A0001154001600000000024
-:107340008E420008AE0200083C0208008C4257F052
-:107350001040015F8F8EFDEC000281C28F85FDE839
-:10736000A5D0000C8E5F000C240F0001240900142E
-:10737000ADDF002C8E590010ADD9001C96470016C9
-:10738000A5C7003C96580014A5D8003EACAF000C31
-:10739000A4AF0010A4AF0012A4AF0014A4AF001655
-:1073A00012600163A1C900119244000330920002EF
-:1073B0002E5300018F92003C266200080A0007EF5E
-:1073C000AF82004C8E4600043C0580003C048008DF
-:1073D000ACA600208E4700089089000024110050C0
-:1073E000312200FF105100BC240500883C048000BD
-:1073F0008C8F01B805E0FFFE0013802B3C1840097C
-:1074000000B81025AF90004C3C101000AC860180F5
-:10741000AC870184AC820188AC9001B80A0007F007
-:107420008F8600308E4500043C0680003C098008B1
-:10743000ACC50020913F00002404005033F900FF48
-:10744000132400B4240600883C0480008C8A01B810
-:107450000540FFFE3C0E400E00CE68253C081000A3
-:10746000AC850180AC800184AC8D0188AC8801B80A
-:10747000912B0000240CFF8024040004016C1825CB
-:10748000240600300E000666A12300000A0008F45E
-:107490008F92003C8E5000048F91FDEC3C0F8000D9
-:1074A000ADF000209225001B30A900101120007CB7
-:1074B000240300813C0480008C8701B804E0FFFEB7
-:1074C0003C1F401FAC900180007F10250013C82B8B
-:1074D0003C101000AC800184AF99004CAC82018854
-:1074E000AC9001B80A0007F08F8600308E44001C73
-:1074F0000E0006E100000000104000FC00403821B2
-:107500008F92003C240600893C0580008CAE01B8B7
-:1075100005C0FFFE00000000ACA701808E50001CDB
-:107520003C1140010013782B00D138253C1310008A
-:10753000ACB00184AF8F004CACA70188ACB301B8EC
-:107540000A0007F08F860030965900023C100800B0
-:10755000261057E833380004130000A73C046000ED
-:107560008E5F001C3C068000ACDF00203C01080060
-:10757000AC3F57E8964F000231E7000114E000E706
-:10758000000000008E420004AE0200083C1008001B
-:107590008E1057F0120000DD3C0680008F85FDE85C
-:1075A000241000018CBF00188F91FDEC8F89FDE441
-:1075B00003E6C825ACB90018A0A00005ACB0000CCB
-:1075C0003C1808008F1857F08F87003CA4B00010BB
-:1075D000001879C2A4B00012A4B00014A4B0001620
-:1075E000A62F000C8CEE00088F8D003C8F8C003C89
-:1075F000AE2E002C8DA8000C24070002AE28001C23
-:10760000918B0010A22B00118F83003C906A001117
-:10761000A12A00088F82003C90440012A0A4004ED2
-:107620008F92003C92460013A22600128F92003CDB
-:10763000965F0014A63F003C96590016A639003EFE
-:107640008E580018AE3800145660FD4CAF87004CC1
-:107650003C05080024A557E80E000705000020217E
-:107660008F92003C000038210A0007EFAF87004CE2
-:107670003C05080024A557E80E00072424040082D6
-:107680008F92003C0A0008D7000038210E000E0738
-:10769000000000008F92003C0A00094A00002021EF
-:1076A0000E0006F6020020219232001B020020216B
-:1076B000365800100E000700A238001B8F92003CC5
-:1076C0000A000A3D000018210E0007BA24040081B8
-:1076D0000A0008F48F92003C9243000C306A0001CB
-:1076E0001140000300000000964B000EA48B002CFC
-:1076F0009248000C310C00021180FF3C0000282150
-:10770000964E00128E4D0014A48E001A0A000A0B29
-:10771000AC8D001C8F83005C8F8700541067FF4A7C
-:10772000000030213C0808002508576C000320C0E9
-:10773000008830218CD10000122500C8246200018D
-:107740003043000F1467FFFA000320C00A000A222A
-:10775000000030213C05080024A557E80E0007244E
-:107760002404008B8F92003C0A0008D70013382BAA
-:107770003C0C08008D8C57E824D9FFFE25910100B0
-:10778000322B007F0167902102331024AD020028C4
-:10779000AE4600D0AE4000D40A000840AE59001CEE
-:1077A000ACC000543C0908008D2957E83C05800C0A
-:1077B00034A80100ACE900288E500014AD1000D0B0
-:1077C0008E4E0014AD0E00D48E4D001025A7FFFE86
-:1077D0000A00087CAD07001C5490FDA3240740005C
-:1077E0000A0008AA240710000E0007AE00000000DF
-:1077F0000A0008F48F92003C8C83442C3C05DEADDB
-:1078000034B2BEEF3C010800AC2057E81072004FC4
-:10781000000000003C046C6234827970146200083D
-:1078200024040002978A0058978300500200282100
-:107830000143482B11200019240400922404000263
-:107840000E0005D6240502003C0B8000AD6200202E
-:107850003C010800AC2257E81040000D8F8E003C20
-:10786000240C00282404000391CD001031A800FF4F
-:10787000550C0001240400010E00004A0000000025
-:1078800010400004240400830A000A6D8F92003C1B
-:10789000240400833C05080024A557E80E000705D2
-:1078A000000000008F92003C0013382B0A0007EF05
-:1078B000AF87004C0A0009D6240200128E4400084B
-:1078C0000E0006E1000000000A0009E2AE02000816
-:1078D0003C05080024A557E80E0006D524040087BF
-:1078E0008F92003C0A0009FF0013102B24040004AF
-:1078F0000E0005D624050030144000170040382142
-:107900008F92003C0A000A52240600833C050800BE
-:1079100024A557E80A000B37240400878E4400048E
-:107920000E0006E1000000000A000A73AE02000823
-:107930003C05080024A557E80E0007242404008213
-:107940008F92003C0A0009FF000010218C83442C18
-:107950000A000B163C046C628F92003C3C088008C5
-:107960003C0C8000240B0050240A0001AD82002052
-:10797000A10B0000A10A000192490004A10900180E
-:1079800092440005A1040019924300063C0408003B
-:107990002484576CA103001A924200073C0308009C
-:1079A00024635768A102001B92450008A105001C32
-:1079B00092460009A106001D925F000AA11F001E49
-:1079C0009259000BA119001F9258000CA118002019
-:1079D0009251000DA11100219250000EA110002221
-:1079E000924F000FA10F0023924E0010A10E002411
-:1079F000924D0011A10D0025964C0014A50C0028F5
-:107A0000964B00168F8A00548F98005CA50B002AB5
-:107A100096490018000A10C025450001A509002C50
-:107A20008E46001C0044C8210043F82130A5000FF9
-:107A3000AFE60000AF27000010B80003AF85005488
-:107A40000A000A520000302124AD000131A8000FC5
-:107A5000000030210A000A52AF88005C3C07080091
-:107A600024E7576800879021ACC000000000302157
-:107A70000A000A22AE4000003C0482013C03600080
-:107A800034820E02AC603D68AF80007C03E00008E9
-:107A9000AC623D6C27BDFFE8AFB000103090FFFF37
-:107AA000001018422C620041AFBF001414400002C5
-:107AB00024040080240300403C010800AC30006036
-:107AC0003C010800AC2300640E000E100060282169
-:107AD000244802BF2409FF800109282400103980AE
-:107AE000001030408FBF00148FB0001000A720217D
-:107AF00000861821AF8300643C010800AC250058C3
-:107B00003C010800AC24005C03E0000827BD00181D
-:107B1000308300FF30C6FFFF30E400FF3C088000E8
-:107B20008D0201B80440FFFE0003540001443825D3
-:107B30003C09600000E920253C031000AD050180F0
-:107B4000AD060184AD04018803E00008AD0301B86F
-:107B50008F86003C3C096012352700108CCB000456
-:107B60003C0C600E35850010316A00062D4800017E
-:107B7000ACE800C48CC40004ACA431808CC2000802
-:107B800094C30002ACA2318403E00008A783007410
-:107B90008F85003C8F87FF408F86FF488CAE0004A6
-:107BA0003C0F601235E80010ACEE00688CAD0008A8
-:107BB000ACED006C8CAC0010ACCC004C8CAB000C71
-:107BC000ACCB004894CA00543C0208008C420044EC
-:107BD00025490001A4C9005494C400543083FFFF18
-:107BE00010620017000000003C0208008C420040B8
-:107BF000A4C200528CA30018ACE300308CA2001485
-:107C0000ACE2002C8CB90018ACF900388CB8001428
-:107C100024050001ACF800348D0600BC50C50019E5
-:107C20008D0200B48D0200B8A4E2004894E400483C
-:107C3000A4E4004A94E800DA03E000083102FFFF00
-:107C40003C0208008C420024A4C00054A4C200528C
-:107C50008CA30018ACE300308CA20014ACE2002C22
-:107C60008CB90018ACF900388CB800142405000158
-:107C7000ACF800348D0600BC54C5FFEB8D0200B893
-:107C80008D0200B4A4E2004894E40048A4E4004A51
-:107C900094E800DA03E000083102FFFF8F86003C21
-:107CA0003C0480008CC900088CC80008000929C069
-:107CB000000839C0AC87002090C300073062000480
-:107CC0001040003AAF85007890CB0007316A000879
-:107CD000114000398F87FF448CCD000C8CCE0014EE
-:107CE00001AE602B11800032000000008CC2000C3D
-:107CF000ACE200708CCB00188F85FF408F88FF4866
-:107D0000ACEB00748CCA00102402FFF8ACAA00C8C7
-:107D10008CC9000CAD0900608CC4001CACA400C070
-:107D200090E3007C0062C824A0F9007C90D8000792
-:107D3000330F000811E000040000000090ED007C0B
-:107D400035AC0001A0EC007C90CF000731EE0001C3
-:107D500011C000090000000090E4007C241800021B
-:107D600034820002A0E2007C90A300EC307900FF96
-:107D7000133800132408003490C90007312600028C
-:107D800010C000040000000090EB007C356A000485
-:107D9000A0EA007C90ED007D31AC003FA0EC007DBE
-:107DA00094A700DA03E0000830E2FFFF8F87FF446A
-:107DB0000A000C4C8CC200140A000C4DACE00070A0
-:107DC0000A000C6EACA800CC8F8C003C27BDFFD8FD
-:107DD000AFB3001CAFB20018AFB00010AFBF0020AF
-:107DE000AFB10014918F00153C13600E3673001074
-:107DF00031EB000FA38B00808D8F00048D8B00086A
-:107E0000959F0012959900109584001A9598001E70
-:107E1000958E001C33EDFFFF332AFFFF3089FFFFF3
-:107E20003308FFFF31C7FFFF3C010800AC2D0024E1
-:107E30003C010800AC2900443C010800AC2A004089
-:107E4000AE683178AE67317C91850015959100164A
-:107E50003C1260123652001030A200FF3230FFFF99
-:107E6000AE623188AE5000B491830014959F001823
-:107E7000240600010066C80433F8FFFFAE5900B8BD
-:107E8000AE5800BC918E0014AF8F00683C086006AD
-:107E900031CD00FFAE4D00C0918A00159584000ED3
-:107EA0003C07600A314900FFAF8B006C3084FFFF54
-:107EB000AE4900C8351100100E000BB534F00410A7
-:107EC0003C0208008C4200603C0308008C630064A4
-:107ED0003C0608008CC600583C0508008CA5005CD8
-:107EE0008F8400648FBF0020AE23004CAE65319CB0
-:107EF000AE030054AE4500DCAE6231A0AE6331A4E7
-:107F0000AE663198AE2200488FB3001CAE0200501E
-:107F10008FB10014AE4200E0AE4300E4AE4600D89C
-:107F20008FB000108FB200180A0004BE27BD0028D1
-:107F3000978500769783006027BDFFE8AFB00010FB
-:107F400000A3102BAFBF0014240400058F90003C49
-:107F500010400055240900020E0005D68F850064EC
-:107F6000AF820078240400031040004F240900026F
-:107F70003C0680000E00004AACC20020240700012D
-:107F8000240820001040004D24040005978E007640
-:107F90008F8AFF442409005025C50001A78500767B
-:107FA000A14900003C0D08008DAD00642403800051
-:107FB0008F84FF40000D6600AD4C0018A540000600
-:107FC000954B000A8F85FF482402FF80016330240F
-:107FD000A546000A915F000A0000482103E2C82577
-:107FE000A159000AA0A00008A140004CA08000C533
-:107FF00096180002978300743C020004A49800DAEB
-:10800000960F00022418FFBF25EE2401A48E00AEB7
-:108010008E0D0004ACAD00448E0C0008ACAC0040EA
-:10802000A4A00050A4A000548E0B000C240C00301F
-:10803000AC8B00288E060010AC860024A480003E85
-:10804000A487004EA4870050A483003CAD42007476
-:10805000AC8800C8ACA80060A08700EC909F00C46A
-:1080600033F9007FA09900C4909000C402187824CE
-:10807000A08F00C4914E007C35CD0001A14D007C45
-:10808000938B0080AD480070AC8C00CCA08B00C6F8
-:108090008F88006C8F870068AC8800B4AC8700B80C
-:1080A000A5400078A540007A8FBF00148FB0001063
-:1080B0000120102103E0000827BD00188F850078FB
-:1080C0000E0006668F8600640A000D3A240900023D
-:1080D00027BDFFE0AFB000108F90003CAFB100149F
-:1080E000AFBF00188E0900040E00048B000921C0E8
-:1080F0008E0800048F84FF408F82FF48000839C03B
-:108100003C068000ACC70020948500DA9043001341
-:108110001460001C30B1FFFF8F8CFF44918B00086E
-:10812000316A00401540000B000000008E0D000475
-:10813000022030218FBF00188FB100148FB00010C3
-:108140002404002200003821000D29C00A000BD4AD
-:1081500027BD00200E000061000000008E0D00040D
-:10816000022030218FBF00188FB100148FB0001093
-:108170002404002200003821000D29C00A000BD47D
-:1081800027BD00200E000059000000008E0D0004E5
-:10819000022030218FBF00188FB100148FB0001063
-:1081A0002404002200003821000D29C00A000BD44D
-:1081B00027BD002027BDFFE0AFB200183092FFFFBF
-:1081C000AFB00010AFBF001CAFB100141240001ED2
-:1081D000000080218F86003C8CC50000240300062F
-:1081E00000053F020005140230E400071483001666
-:1081F000304500FF2CA80006110000400005588003
-:108200003C0C0800258C54EC016C50218D49000079
-:1082100001200008000000008F8E007C240D00016A
-:1082200011CD005024020002AF82007C260900011B
-:108230003130FFFF24C800200212202B0100302122
-:108240001480FFE5AF88003C020010218FBF001CA6
-:108250008FB200188FB100148FB0001003E0000837
-:1082600027BD00209387006254E0003400003021D5
-:108270000E000C82000000008F86003C0A000D9A60
-:10828000240200018F87007C2405000210E50031E4
-:1082900024040013000028210000302124070001DD
-:1082A0000E000BD4000000000A000D9B8F86003CDE
-:1082B0008F83007C240200021462FFF62404001263
-:1082C0000E000C37000000008F8500780040302140
-:1082D000240400120E000BD4000038210A000D9B6C
-:1082E0008F86003C8F83007C2411000310710029CD
-:1082F000241F0002107FFFCE260900012404001075
-:1083000000002821000030210A000DB824070001D8
-:108310008F91007C240600021626FFF92404001029
-:108320000E000CDC00000000144000238F98003C7D
-:108330008F86003C0A000D9A2402000324040014D6
-:108340000E000BD4000028218F86003C0A000D9AF5
-:10835000240200020E000D44000000000A000D9BE4
-:108360008F86003C0E000BE4000000002419000280
-:1083700024040014000028210000302100003821CE
-:10838000AF99007C0E000BD4000000000A000D9B8A
-:108390008F86003C0E000BF4000000008F850078F3
-:1083A000241900020040302124040010000038216C
-:1083B0000A000DF1AF99007C004038212404001020
-:1083C000970F0002000028210E000BD431E6FFFFBA
-:1083D0008F86003C0A000D9BAF91007C8F84FF4488
-:1083E0003C077FFF34E6FFFF8C8500182402000164
-:1083F00000A61824AC83001803E00008A082000542
-:108400003084FFFF30A5FFFF108000070000182117
-:108410003082000110400002000420420065182153
-:108420001480FFFB0005284003E0000800601021D5
-:1084300010C00007000000008CA2000024C6FFFF4F
-:1084400024A50004AC82000014C0FFFB24840004B7
-:1084500003E000080000000010A0000824A3FFFFB4
-:10846000AC86000000000000000000002402FFFFB6
-:108470002463FFFF1462FFFA2484000403E0000871
-:1084800000000000000411C003E000082442024084
-:1084900027BDFFE8AFB0001000808021AFBF0014FF
-:1084A0000E000E3100A0202100504821240AFF8038
-:1084B0008FBF00148FB00010012A30243127007FB5
-:1084C0003C08800A3C04210000E8102100C4282553
-:1084D0003C03800027BD0018AC650024AF8200205B
-:1084E000AC400000AC65002403E00008AC40004054
-:1084F0003C0D08008DAD005800056180240AFF8006
-:1085000001A45821016C4821012A30243127007F21
-:108510003C08800C3C04210000E8102100C4282500
-:108520003C038000AC650028AF82001C03E000081B
-:10853000AC40002430A5FFFF3C0680008CC201B88F
-:108540000440FFFE3C08601500A838253C031000DD
-:10855000ACC40180ACC00184ACC7018803E0000852
-:10856000ACC301B83C0D08008DAD0058000561801A
-:10857000240AFF8001A45821016C4021010A4824EB
-:10858000000931403107007F00C728253C04200046
-:1085900000A418253C028000AC43083003E000082A
-:1085A000AF80001C27BDFFE8AFB000100080802125
-:1085B000AFBF00140E000E3100A020210050482152
-:1085C000240BFF80012B5024000A39403128007F02
-:1085D0003C0620008FBF00148FB0001000E8282553
-:1085E00034C2000100A218253C04800027BD0018F9
-:1085F000AC83083003E00008AF8000203C05800811
-:108600008CA700603C0680080087102B14400011E6
-:108610002C8340008CA800602D0340001060000FE8
-:10862000240340008CC900600089282B14A000029C
-:10863000008018218CC3006000035A42000B308078
-:108640003C0A0800254A554000CA202103E00008E2
-:108650008C8200001460FFF32403400000035A42A0
-:10866000000B30803C0A0800254A554000CA2021F2
-:1086700003E000088C8200003C05800890A60008FA
-:108680009384009024C20001304200FF3043007FF9
-:108690001064000C00023827A0A200083C048000EF
-:1086A0008C85017804A0FFFE8F8A008824090002CF
-:1086B0003C081000AC8A0140A089014403E0000896
-:1086C000AC8801780A000EB630E2008027BDFFC8F2
-:1086D0003C05800834A40080AFBF0034AFBE00303A
-:1086E000AFB7002CAFB60028AFB50024AFB4002060
-:1086F000AFB3001CAFB20018AFB10014AFB00010A0
-:10870000948300789482007A104300CD2405FFFF03
-:108710003C1E80080080B8210A000F923C168000A1
-:10872000108A00C88FBF00348F8400883C0B08007B
-:108730008D6B005C240AFF803C07800E01644021A1
-:10874000010A4824AEC9002C96E6007A3102007F67
-:108750000047182130C57FFF000580400203A82193
-:1087600096BF00003C1908008F390058240FFF8085
-:1087700033F53FFF032488210015C1800238902182
-:10878000024F58243C0C0100016C5025324E007FF2
-:108790003C0D800C01CD9021028028210E000E346A
-:1087A000AECA00288E4800108E4900308F86002007
-:1087B0002402000201093823AE470010A0C20000C5
-:1087C00096E3005C8E4400308F9100200E000E8FE7
-:1087D0003070FFFF00022B800205C8253C1F4200BD
-:1087E000033FC025AE3800048E5100048F8700205F
-:1087F0008E4F000024080008ACF1001CACEF0018FC
-:10880000ACE0000CACE000109250000A2406000519
-:108810002405C000320E00FFA4EE0014964D00089F
-:1088200002E09821A4ED0016924C000A3C0D80084D
-:10883000318B00FFA4EB00209644000835AC01000A
-:10884000A4E40022ACE00024924A000B314900FF6E
-:10885000A4E90002A0E800018E4200308F830020CE
-:108860002408FFBFAC620008A06600308F8E002095
-:108870002403FFDF95DF003203E5C8240335C0255C
-:10888000A5D8003291D10032322F003F35F00040A0
-:10889000A1D000328F890020AD2000348D8B00C024
-:1088A000AD2B00389124003C3C0B7FFF308A007FC9
-:1088B000A12A003C8F8600203564FFFF90C7003C52
-:1088C00000E81024A0C2003C8F9900209325003CB2
-:1088D00000A3F824A33F003C8E5800348F8C002066
-:1088E000AD9800408E4F002C8E51003001F1802356
-:1088F000AD900044918E004831CD007FA18D00489D
-:108900008F8500208E4A00308CA900480144402405
-:108910000136382400E83025ACA600489242000A0F
-:10892000A0A2004C964300088F9F0020A7E3004EB2
-:108930008E5000308E4400300E0002F08FC5006073
-:1089400092F1007C0002C1400002C90003197821A5
-:10895000322E00020040282111C00003020F8021A6
-:108960000002208002048021926D007C31AC000462
-:108970001180000200057080020E80218E440030BC
-:108980008F87002024058000308B0003000B5023CC
-:108990003149000302094021ACE800349664007AB2
-:1089A0009662007A9670007A30467FFF24C30001F9
-:1089B000307F7FFF0205C824033FC025A678007AD8
-:1089C0009671007A3C1208008E520060322F7FFFB1
-:1089D00011F20028000000008F8400880E000E694C
-:1089E00002A028218F8400880E000E7902802821A1
-:1089F0000E000EAE0000000096F3007896F4007AA8
-:108A00001293000F000028213C0980083524010042
-:108A100093C80008908700C53114007F30E400FF40
-:108A20000284302B14C0FF3E268A0001938D0090F3
-:108A3000268B0001008D6021158BFF3C8F84008800
-:108A40008FBF00348FBE00308FB7002C8FB6002848
-:108A50008FB500248FB400208FB3001C8FB2001894
-:108A60008FB100148FB0001000A0102103E00008A7
-:108A700027BD0038967F007A03E5C824A679007ADE
-:108A80009278007A926E007A331100FF001179C259
-:108A9000000F9027001269C031CC007F018D28257E
-:108AA000A265007A0A000F878F8400883C0380004B
-:108AB0003084FFFF30A5FFFFAC640018AC65001CDC
-:108AC00003E000088C62001427BDFFA83C06800864
-:108AD000AFBF0054AFBE0050AFB7004CAFB60048B8
-:108AE000AFB50044AFB40040AFB3003CAFB2003804
-:108AF000AFB10034AFB0003034C80100910500C5FB
-:108B000090C700083084FFFF30A500FF30E2007FEF
-:108B10000045182AAFA40010A7A000181060009C00
-:108B2000AFA0001490CA00083149007F00A930238B
-:108B300024D4FFFF0014882B8FB300100013902B58
-:108B400002328024520000858FB400143C03800858
-:108B500094790052947E00508FB60010033EC023DB
-:108B60000018BC00001714030016FC0002C2A82A5B
-:108B700016A00002001F2C030040282100143C0016
-:108B80000007240300A4102A5440000100A0202163
-:108B90002885000914A000020080B02124160008D6
-:108BA0003C0C80088D860048001659808D88004C4A
-:108BB0003C0380003169FFFF3C0A0010012A202598
-:108BC00034700400AC660038AF90008CAC68003C98
-:108BD000AC64003000000000000000000000000055
-:108BE0000000000000000000000000000000000085
-:108BF000000000008C6E000031CD002011A0FFFDB0
-:108C00000016902A0251782411E000360000B821A5
-:108C10003C1580003C118008922200088EA40100BF
-:108C200000008821305E007F0E000E3403C0282132
-:108C30008E1F00108EA4010033F93FFF032028216E
-:108C40000E000E4CAFB9001C921800003302003F1A
-:108C50002C5300085260000D000080212405000103
-:108C6000004518043067005D14E000B18F92008C5D
-:108C7000306400021480014D8F86008C30680080C3
-:108C80005500004A96180012000080218EA40100B1
-:108C90000E000E698FA5001C8EA401000E000E7937
-:108CA00003C028211200004F3C07800826E4000181
-:108CB0008F8C008C0004BC000291A0230017BC0321
-:108CC00002F6302A0014882B259F00402412000150
-:108CD00000D1F02403E08021AF9F008C17C0FFCDAE
-:108CE000AFB200143C07800894E800508FB3001026
-:108CF0003C05800002E810213C0D0020A4E2005059
-:108D0000ACAD003094F5005094F600520277502339
-:108D10003149FFFF12D50041AFA900108CF6004C7D
-:108D2000001749808CF7004802C9F8210000202173
-:108D300003E9302B02E4602101868021ACFF004C66
-:108D4000ACF000488FB300100013902B0232802447
-:108D50001600FF7F3C0380088FB400148FBF0054BF
-:108D60008FBE00503A8200018FB7004C8FB600488A
-:108D70008FB500448FB400408FB3003C8FB20038F1
-:108D80008FB100348FB0003003E0000827BD0058D9
-:108D900090CF0008938C009031EE007F00AE6823E6
-:108DA000018D58210A000FDD2574FFFF8F84008894
-:108DB00024100001A7B800180E000E5D97A500183A
-:108DC0008EA401000E000E698FA5001C8EA4010068
-:108DD0000E000E7903C028211600FFB526E400011D
-:108DE0003C07800894E800508FB300103C058000D9
-:108DF00002E810213C0D0020A4E20050ACAD003090
-:108E000094F5005094F60052027750233149FFFF49
-:108E10000014882B16D5FFC1AFA9001094FE005492
-:108E20008CF0004433D8FFFE001878C0020F702188
-:108E3000ACAE003C8CF900448CA3003C03235823C7
-:108E4000196002EA000000008CF200402642000196
-:108E5000ACA200383C05005034A700103C03800051
-:108E6000AC670030000000000000000000000000BF
-:108E700000000000000000000000000000000000F2
-:108E8000000000008C7F000033E6002010C0FFFDD2
-:108E90003C108008960D00543C1780003C0680086A
-:108EA00031B30001001350C00157B0218EC9040036
-:108EB0003C0708008CE700443C040020ACC9004893
-:108EC0008ED50404240C0001ACD5004C10EC02D06B
-:108ED000AEE40030961800523C0508008CA5004016
-:108EE00000B87821A60F0052960E005425C3000149
-:108EF000A6030054961900543324FFFF5487FF0F34
-:108F00008FB3001030A5FFFF0E000FBBA60000546A
-:108F10003C0508008CA50024961200520045382319
-:108F20000247F023A61E00520A000FDF8FB3001085
-:108F30008F93001C3C0700808E4400283C1FFFEFED
-:108F400037F9FFFFAE6400008E420024A260000AE1
-:108F50003C0FFF9FAE6200049245002C35EEFFFFF0
-:108F60003C0C0040A265000C8E71000CA265000B49
-:108F70003C0600FF0227C0250319682401AE5824CF
-:108F8000016C5025AE6A000C8E490004AE600018DA
-:108F900034D0FFFFAE6900148E48002C8F82008809
-:108FA000A660000801102024AE6400108E51000855
-:108FB00096470012AE7100208E58000C30E33FFF40
-:108FC00000032980AE7800248E4C001400A2F82102
-:108FD00030F90001AE6C00288E4B0018001F71C2E2
-:108FE00000197B80AE6B002C8E49001C01CF6821DC
-:108FF000A66D001CAE690030964A00028E46002025
-:10900000A66A001EAE66003492430033307000043E
-:1090100056000006924B00003C06800834D0010048
-:109020008E0800C0AE680030924B00008F8A00208E
-:10903000A14B0030924900333123000250600007F9
-:10904000924400018F8C0020240FFF80918E00300D
-:1090500001CF6825A18D0030924400018F8200204D
-:109060002418FFBF240AFFDFA04400318F9900209D
-:109070003C088008350400809331003C323F007F7B
-:10908000A33F003C8F8D002091AF003C01F870247D
-:10909000A1AE003C8F8700208E6C001490E3003C52
-:1090A0002D8B0001000B4940006A302400C9802547
-:1090B000A0F0003C964500128F870020A4E5003206
-:1090C0008E450004909F007C30A20003000288239C
-:1090D0003239000300B9102133F8000217000002F2
-:1090E00024440034244400303C038008346600806B
-:1090F00090C9007C00A980243208000415000002F9
-:1091000024830004008018218F840020240800029A
-:10911000ACE30034A08800009242003F8F9F002003
-:109120003C188008370F0080A3E200018F910020D7
-:109130009259003F8E440004A639000295EE005C6F
-:109140000E000E8F31D0FFFF00026B80020D5825FC
-:109150003C0C4200016C2825AE2500048E4A0038E4
-:109160008F850020ACAA00188E470034ACA7001CE5
-:10917000ACA0000CACA00010A4A00014A4A0001689
-:10918000A4A00020A4A00022ACA000248E620014A1
-:109190005040000124020001ACA200080E000EAEF7
-:1091A000241100010A0010332410000190D30001A3
-:1091B000327200201240018A241000013C0A80080B
-:1091C0003547008090E3007C8F93001CAFA0002403
-:1091D0003069000111200011AFB000203C0580086B
-:1091E0008CCB00148CAC0060016C882B1620000323
-:1091F000016028213C1080088E0500603C0F80082B
-:1092000035E300808C6E007000AE682B15A0000264
-:1092100000A020218C640070AFA400248F82FF4C3A
-:109220008CC400148C5900700099C02B53000001AD
-:109230008C4400708FA200240082F82313E0000306
-:10924000AFBF002824040002AFA400208FB200208A
-:109250000292402B1500015B000018218CC50038DC
-:109260008E6B000C3C0C0080AE6500008CC9003495
-:109270003C11FF9F016C5025AE69000490C8003F6F
-:109280003623FFFF014310243C1200203C04FFEF73
-:10929000A268000B00523825349FFFFF00FFC02456
-:1092A0003C1900088F87008C03197825AE6F000CDD
-:1092B0008CED0014AE6000188FB10024AE6D001468
-:1092C0008CF000188FAE0028AE70001C8CE50008F2
-:1092D000022E6021AE6500248CEB000CA6600038E5
-:1092E000A660003AAE6C002CAE600028AE6B002089
-:1092F0008CEA00148FA30028015148230123302356
-:1093000010C00011AE66001090E9003D8E620004AE
-:109310008E7F00000009910000527821000020217A
-:1093200001F2C82B03E4C02103197021AE6F0004C1
-:10933000AE6E000090ED003DA26D000A8F90008C93
-:1093400096060006A66600088F98002024190002E1
-:109350003C0F80088FA4002435EE0080A319000084
-:1093600095CD005C8F9200200E000E8F31B0FFFF74
-:1093700000022B80020560253C0642008F85008C90
-:1093800001865825AE4B00048F8400208CB1003834
-:10939000AC9100188CA30034AC83001CAC80000C92
-:1093A000AC800010A4800014A4800016A4800020CB
-:1093B000A4800022AC80002490AA003F8FA7002444
-:1093C000A48A000210E0000C240900018FBF0028CD
-:1093D00053E0018890A2003D90A2003E2448000185
-:1093E000A08800018F8500208FA40024ACA4000871
-:1093F0000A0012133C118008A08900018F8500200B
-:1094000024020001ACA200083C1180083623008031
-:10941000906A007C3147000214E000022406003408
-:10942000240600308F8D008C3C0F800835EE0080C4
-:1094300091AC000091C8007C8FB00024A0AC00303B
-:109440008F91008C8F8200208FAA00249227000128
-:1094500032120003240B0004A047003101721823CC
-:109460008F84008C8F8B0020241FC00094980012E2
-:109470009579003230690003330F3FFF033F7024BA
-:1094800001CF6825A56D00329165003200CA3021F8
-:1094900000C9302130B0003F360C0040A16C0032D2
-:1094A0008FB2002431070004124000028F85002093
-:1094B00000C730213C048008ACA600343488010089
-:1094C0008D1900C08FBF0024240DFFBFACB9003838
-:1094D00090AF003C2FF800012412FFDF31EE007F37
-:1094E000A0AE003C8F8B0020001889409170003C9A
-:1094F000020D6024A16C003C8F87002090E3003CAB
-:109500000072502401511025A0E2003C8F88008C8D
-:109510008F9900208D090020AF2900408D0600247E
-:10952000AF2600448D040028AF2400488D1F002C76
-:10953000AF3F004C0E000EAE000000008FB80020C0
-:10954000240500025705009F8FA300203C1F8000C8
-:109550003C1280088FE40100925800088F92FF4C63
-:109560000E000E343305007F8F8E00208FAF002059
-:109570008FA40028A1CF00009659005C8F91002095
-:109580000E000E8F3330FFFF00025B80020B682558
-:109590003C0842008F8B008C01A83025AE260004C9
-:1095A0008D7000388F8600200000282100051100F2
-:1095B000ACD000188D6C00343C047FFF3488FFFF72
-:1095C000ACCC001C9171003E8CCA001C8CDF0018D2
-:1095D0000011390000111F02014770210043482586
-:1095E00001C7C02B03E9782101F8C821ACCE001CCB
-:1095F000ACD90018ACC0000CACC00010916D003E9E
-:109600008FAA002824070005A4CD0014957000043B
-:109610002418C0000148C824A4D00016916C003E54
-:1096200001402021A4CC002095650004A4C500229F
-:10963000ACC000249163003FA4C300029171003DBF
-:1096400026220001A0C200018F8900203C02800870
-:1096500034460100AD2A0008A12700308F91002078
-:109660008F9F008C2402FF80962F003297EE00120D
-:10967000030F802431CD3FFF020D6025A62C003260
-:10968000922500322418FFBF2410FFDF30AB003FCB
-:1096900035630040A22300328F9F00202403FFFF88
-:1096A000AFE000348CCA00C0AFEA003893E7003C5A
-:1096B00030E9007FA3E9003C8F8D00203C09800049
-:1096C00091AF003C01F87024A1AE003C8F8B0020CC
-:1096D000916C003C01902824A165003C8F870020FC
-:1096E000ACE300408FB100243C038008ACF100449F
-:1096F00090EA004801423025A0E600488F90002003
-:109700008F8E008C8E1F004803E9C0240319782532
-:10971000AE0F004891CD003EA20D004C8F8C008C06
-:109720008F8B002095850004A565004E0E0002F089
-:109730008C650060924A007C004028218FA600289A
-:109740000002114000058900005138213149000212
-:109750001120000300C71821000520800064182193
-:109760003C028008344A00809147007C30E90004C4
-:10977000112000038FB9002800056080006C1821BB
-:10978000240B00048F91002033300003017040232C
-:10979000310D0003006D3021AE2600343C038008FB
-:1097A000A66500383C0580008CA401009073000879
-:1097B0000E000E793265007F0E000EAE0000000034
-:1097C0008FA300200003782B000F80230290A02499
-:1097D00000608021006088210A0010330010802B77
-:1097E0008F91001C8CD8003824190003A620000893
-:1097F000AE3800008CCF0034A220000A8F8E008C7F
-:10980000AE2F00043C05008091CB003FA239000C34
-:109810008E28000C3C0DFF9FA22B000B010510258C
-:1098200035A3FFFF3C13FFEF8F8E008C00433824DD
-:10983000366AFFFF00EA4824AE29000C8DC40014EC
-:1098400095D800128F860088AE2400108DCC0014AD
-:10985000AE200018AE200020AE2C0014AE20002454
-:109860008DDF0018330C3FFF000C9180AE3F0028C5
-:109870008DCF00080246C821330B0001AE2F003007
-:109880008DC3000C8F930020001941C2000B2B8068
-:1098900001056821240200023C0A8008A62D001C54
-:1098A000A6200034AE23002C35470080A2620000C1
-:1098B00094E9005C8F9900203C044200313FFFFF97
-:1098C00003E43025AF2600048F98008C240E00019D
-:1098D0002402C0008F12003824060034AF32001872
-:1098E0008F0F00343C12800836580080AF2F001CC8
-:1098F000AF20000CAF200010A7200014A7200016F6
-:10990000A7200020A7200022AF200024A7300002BB
-:10991000A32E00018F8D00208F8B008CADB000082E
-:1099200091680000A1A800308F91008C8F830020E7
-:1099300092250001A06500318F9F002097F300322F
-:1099400002625024014C3825A7E7003293E9003227
-:109950003124003FA3E40032930F007C31EE00027B
-:1099600015C000028F840020240600303C0E8008C1
-:10997000AC86003435D101008E3900C02403FFBF0E
-:1099800002008821AC990038908B003C0010802B9D
-:109990003165007FA085003C8F8D002091A8003CA0
-:1099A00001031024A1A2003C8F87002090F3003C0B
-:1099B000366A0020A0EA003C8F9F008C8F92002026
-:1099C0008FE90020AE4900408FE40024AE440044FB
-:1099D0008FEC0028AE4C00488FE6002C0E000EAE37
-:1099E000AE46004C0A001033000000000A0010A42C
-:1099F0008CE2004024480001A08800018F850020EF
-:109A00008FA40024ACA400080A0012133C118008A3
-:109A100094CB00523C0808008D080024010B102153
-:109A2000A4C200520A000FDF8FB3001027BDFFE071
-:109A30003C0D8008AFB20018AFB00010AFBF001CE3
-:109A4000AFB1001435B200808E4C001835A801006B
-:109A5000964B000695A70050910900EC000C5602A9
-:109A6000016728233143007F312600FF24020003D1
-:109A7000A3830090AF84008810C2001B30B0FFFFAA
-:109A8000910600EC2412000530C200FF1052003392
-:109A900000000000160000098FBF001C8FB20018E4
-:109AA0008FB100148FB00010240D0C003C0C80000E
-:109AB00027BD002003E00008AD8D00240E000FC27A
-:109AC000020020218FBF001C8FB200188FB100143C
-:109AD0008FB00010240D0C003C0C800027BD00202E
-:109AE00003E00008AD8D0024965800789651007A66
-:109AF000924E007D0238782631E8FFFF31C400C065
-:109B0000148000092D11000116000037000000002C
-:109B10005620FFE28FBF001C0E000EC300000000A5
-:109B20000A0013B78FBF001C1620FFDA00000000E8
-:109B30000E000EC3000000001440FFD88FBF001CB1
-:109B40001600002200000000925F007D33E2003F1B
-:109B5000A242007D0A0013B78FBF001C950900DAEE
-:109B60008F86006400802821240400050E0006660C
-:109B70003130FFFF978300763C0480002465FFFFAF
-:109B8000A78500768C8A01B80540FFFE0000000022
-:109B9000AC8001808FBF001CAC9001848FB2001894
-:109BA0008FB100148FB000103C0760133C0B100005
-:109BB000240D0C003C0C800027BD0020AC870188E0
-:109BC000AC8B01B803E00008AD8D00240E000FC27D
-:109BD000020020215040FFB18FBF001C925F007D2A
-:109BE0000A0013E433E2003F0E000FC202002021FE
-:109BF0001440FFAA8FBF001C1220000700000000C5
-:109C00009259007D3330003F36020040A242007D71
-:109C10000A0013B78FBF001C0E000EC30000000027
-:109C20005040FF9E8FBF001C9259007D3330003F93
-:109C30000A00141336020040000411C003E00008BB
-:109C4000244202403C050006008510253C038000AC
-:109C5000AC620030000000000000000000000000C6
-:109C60003C0580008CA7000030E6001010C0FFFD0E
-:109C7000000000008CAB003C8CAA003C0164482131
-:109C8000012A402B110000043C0680008CAD0038F6
-:109C900025AC0001ACAC00388CCF003C01E4702155
-:109CA00003E00008ACCE003C27BDFFD0AFB20018E7
-:109CB000AFB00010AFBF0028AFB50024AFB4002094
-:109CC000AFB3001CAFB1001400A0902114A000128B
-:109CD000008080218F8200240002188014600037E9
-:109CE000240400100E001421000000008FBF002883
-:109CF0008FB500248FB400208FB3001C8FB20018E2
-:109D00008FB100148FB000100000102127BD00306B
-:109D100003E00008AF80002410A0001E000088218E
-:109D20003C138000241400200A0014603C15000538
-:109D3000263100040232502B11400017024010213E
-:109D40008F8800248E0700002404008000084880CB
-:109D50000133182125060001AC6704002610000419
-:109D600014D4FFF3AF8600240E001421000000007D
-:109D7000AE75003000000000000000000000000090
-:109D800000000000263100040232502B1540FFEC89
-:109D9000AF800024024010218FBF00288FB500241F
-:109DA0008FB400208FB3001C8FB200188FB1001445
-:109DB0008FB0001003E0000827BD0030000320230F
-:109DC0003085000F0A0014490065202127BDFFD807
-:109DD0003C03800000A03821AC670038AFB100140C
-:109DE000AC66003C008088213C060022AC66003056
-:109DF000AFB00010AC7100283C10800C3C04800C0B
-:109E000024050070AFBF0024AFB40020AFB3001C26
-:109E10000E00143AAFB20018260400800E00143A67
-:109E200024050080260401000E00143A240500F0E9
-:109E30003C0208008C4200641040001300008021A6
-:109E40003C1480002413FF803C12800C0E00141E72
-:109E50000200202100514821312A007F0133402493
-:109E60000152202124050050AE8800280E00143A2B
-:109E7000261000013C0508008CA500640205202B7B
-:109E80001480FFF2000000003C0608008CC6006051
-:109E900010C00015000080213C1480002413FF80B6
-:109EA0003C12800C3C1908008F3900580010C1800A
-:109EB000240500400331782101F8682131AE007F8C
-:109EC00001B3602401D22021AE8C00280E00143A88
-:109ED000261000013C0608008CC600600206582BC4
-:109EE0001560FFF0000000003C1008008E10005CC0
-:109EF0002414FF803C1F800C0211982102749024CE
-:109F00003262007F3C118000005F2021AE320028C9
-:109F10000E00143A000628408FBF00248FB40020A2
-:109F20008FB3001C8FB200188FB100148FB00010D7
-:109F300000002021000028210A00143A27BD002833
-:109F40008F83003C8C62000410400003000000007E
-:109F500003E00008000000008C6400108C6500081D
-:089F60000A0014838C66000C5A
-:089F6800000000000000001BD6
-:109F70000000000F0000000A0000000800000006BA
-:109F800000000005000000050000000400000004BF
-:109F900000000003000000030000000300000003B5
-:109FA00000000003000000020000000200000002A8
-:109FB0000000000200000002000000020000000299
-:109FC0000000000200000002000000020000000289
-:109FD0000000000200000002000000020000000279
-:0C9FE00000000001000000010000000172
-:049FEC0080080100E8
-:109FF0008008008080080000080017900800179073
-:10A00000080017C8080017C8080017DC080017ACBC
-:10A0100008001A04080019D008001A5C08001A5C2D
-:10A0200008001AE408001A148008024008002154AD
-:10A0300008001FA00800217C0800221408002364E7
-:10A04000080023B0080024D4080023DC08002460A2
-:10A0500008002010080029880800292C08001FBCCF
-:10A0600008001FBC08001FBC080025480800254840
-:10A0700008001FBC08001FBC0800280408001FBC03
-:10A0800008001FBC08001FBC08001FBC0800286493
-:10A0900008001FBC08001FBC08001FBC08001FBC34
-:10A0A00008001FBC08001FBC08001FBC08001FBC24
-:10A0B00008001FBC08001FBC08001FBC08001FBC14
-:10A0C00008001FBC08001FBC080023D008001FBCEC
-:10A0D00008001FBC080028D408001FBC08001FBCD3
-:10A0E00008001FBC08001FBC08001FBC08001FBCE4
-:10A0F00008001FBC08001FBC08001FBC08001FBCD4
-:10A1000008001FBC08001FBC08001FBC08001FBCC3
-:10A1100008001FBC08001FBC08001FBC080027283F
-:10A1200008001FBC08001FBC08002690080025EC92
-:10A130000800375008003724080036F0080036C4FD
-:10A14000080036A408003658800801008008008006
-:08A15000800800008008008077
-:08A158000A000C760000000073
-:10A16000000000000000000D727870342E362E3191
-:10A17000360000000406100300000000000000018B
-:10A1800000000000000000000000000000000000CF
-:10A1900000000000000000000000000000000000BF
-:10A1A00000000000000000000000000000000000AF
-:10A1B000000000000000000000000000000000009F
-:10A1C000000000000000000000000000000000008F
-:10A1D000000000000000000000000000000000007F
-:10A1E000000000000000000000000000000000006F
-:10A1F000000000000000000000000000000000005F
-:10A20000000000000000000000000000000000004E
-:10A21000000000000000000000000000000000003E
-:10A22000000000000000000000000000000000002E
-:10A23000000000000000000000000000000000001E
-:10A24000000000000000000000000000000000000E
-:10A2500000000000000000000000000000000000FE
-:10A2600000000000000000000000000000000000EE
-:10A2700000000000000000000000000000000000DE
-:10A2800000000000000000000000000000000000CE
-:10A2900000000000000000000000000000000000BE
-:10A2A00000000000000000000000000000000000AE
-:10A2B000000000000000000000000000000000009E
-:10A2C000000000000000000000000000000000008E
-:10A2D000000000000000000000000000000000007E
-:10A2E000000000000000000000000000000000006E
-:10A2F000000000000000000000000000000000005E
-:10A30000000000000000000000000000000000004D
-:10A31000000000000000000000000000000000003D
-:10A32000000000000000000000000000000000002D
-:10A33000000000000000000000000000000000001D
-:10A34000000000000000000000000000000000000D
-:10A3500000000000000000000000000000000000FD
-:10A3600000000000000000000000000000000000ED
-:10A3700000000000000000000000000000000000DD
-:10A3800000000000000000000000000000000000CD
-:10A3900000000000000000000000000000000000BD
-:10A3A00000000000000000000000000000000000AD
-:10A3B000000000000000000000000000000000009D
-:10A3C000000000000000000000000000000000008D
-:10A3D000000000000000000000000000000000007D
-:10A3E000000000000000000000000000000000006D
-:10A3F000000000000000000000000000000000005D
-:10A40000000000000000000000000000000000004C
-:10A41000000000000000000000000000000000003C
-:10A42000000000000000000000000000000000002C
-:10A43000000000000000000000000000000000001C
-:10A44000000000000000000000000000000000000C
-:10A4500000000000000000000000000000000000FC
-:10A4600000000000000000000000000000000000EC
-:10A4700000000000000000000000000000000000DC
-:10A4800000000000000000000000000000000000CC
-:10A4900000000000000000000000000000000000BC
-:10A4A00000000000000000000000000000000000AC
-:10A4B000000000000000000000000000000000009C
-:10A4C000000000000000000000000000000000008C
-:10A4D000000000000000000000000000000000007C
-:10A4E000000000000000000000000000000000006C
-:10A4F000000000000000000000000000000000005C
-:10A50000000000000000000000000000000000004B
-:10A51000000000000000000000000000000000003B
-:10A52000000000000000000000000000000000002B
-:10A53000000000000000000000000000000000001B
-:10A54000000000000000000000000000000000000B
-:10A5500000000000000000000000000000000000FB
-:10A5600000000000000000000000000000000000EB
-:10A5700000000000000000000000000000000000DB
-:10A5800000000000000000000000000000000000CB
-:10A5900000000000000000000000000000000000BB
-:10A5A00000000000000000000000000000000000AB
-:10A5B000000000000000000000000000000000009B
-:10A5C000000000000000000000000000000000008B
-:10A5D000000000000000000000000000000000007B
-:10A5E000000000000000000000000000000000006B
-:10A5F000000000000000000000000000000000005B
-:10A60000000000000000000000000000000000004A
-:10A61000000000000000000000000000000000003A
-:10A62000000000000000000000000000000000002A
-:10A63000000000000000000000000000000000001A
-:10A64000000000000000000000000000000000000A
-:10A6500000000000000000000000000000000000FA
-:10A6600000000000000000000000000000000000EA
-:10A6700000000000000000000000000000000000DA
-:10A6800000000000000000000000000000000000CA
-:10A6900000000000000000000000000000000000BA
-:10A6A00000000000000000000000000000000000AA
-:10A6B000000000000000000000000000000000009A
-:10A6C000000000000000000000000000000000008A
-:10A6D000000000000000000000000000000000007A
-:10A6E000000000000000000000000000000000006A
-:10A6F000000000000000000000000000000000005A
-:10A700000000000000000000000000000000000049
-:10A710000000000000000000000000000000000039
-:10A720000000000000000000000000000000000029
-:10A730000000000000000000000000000000000019
-:10A740000000000000000000000000000000000009
-:10A7500000000000000000000000000000000000F9
-:10A7600000000000000000000000000000000000E9
-:10A7700000000000000000000000000000000000D9
-:10A7800000000000000000000000000000000000C9
-:10A7900000000000000000000000000000000000B9
-:10A7A00000000000000000000000000000000000A9
-:10A7B0000000000000000000000000000000000099
-:10A7C0000000000000000000000000000000000089
-:10A7D0000000000000000000000000000000000079
-:10A7E0000000000000000000000000000000000069
-:10A7F0000000000000000000000000000000000059
-:10A800000000000000000000000000000000000048
-:10A810000000000000000000000000000000000038
-:10A820000000000000000000000000000000000028
-:10A830000000000000000000000000000000000018
-:10A840000000000000000000000000000000000008
-:10A8500000000000000000000000000000000000F8
-:10A8600000000000000000000000000000000000E8
-:10A8700000000000000000000000000000000000D8
-:10A8800000000000000000000000000000000000C8
-:10A8900000000000000000000000000000000000B8
-:10A8A00000000000000000000000000000000000A8
-:10A8B0000000000000000000000000000000000098
-:10A8C0000000000000000000000000000000000088
-:10A8D0000000000000000000000000000000000078
-:10A8E0000000000000000000000000000000000068
-:10A8F0000000000000000000000000000000000058
-:10A900000000000000000000000000000000000047
-:10A910000000000000000000000000000000000037
-:10A920000000000000000000000000000000000027
-:10A930000000000000000000000000000000000017
-:10A940000000000000000000000000000000000007
-:10A9500000000000000000000000000000000000F7
-:10A9600000000000000000000000000000000000E7
-:10A9700000000000000000000000000000000000D7
-:10A9800000000000000000000000000000000000C7
-:10A9900000000000000000000000000000000000B7
-:10A9A00000000000000000000000000000000000A7
-:10A9B0000000000000000000000000000000000097
-:10A9C0000000000000000000000000000000000087
-:10A9D0000000000000000000000000000000000077
-:10A9E0000000000000000000000000000000000067
-:10A9F0000000000000000000000000000000000057
-:10AA00000000000000000000000000000000000046
-:10AA10000000000000000000000000000000000036
-:10AA20000000000000000000000000000000000026
-:10AA30000000000000000000000000000000000016
-:10AA40000000000000000000000000000000000006
-:10AA500000000000000000000000000000000000F6
-:10AA600000000000000000000000000000000000E6
-:10AA700000000000000000000000000000000000D6
-:10AA800000000000000000000000000000000000C6
-:10AA900000000000000000000000000000000000B6
-:10AAA00000000000000000000000000000000000A6
-:10AAB0000000000000000000000000000000000096
-:10AAC0000000000000000000000000000000000086
-:10AAD0000000000000000000000000000000000076
-:10AAE0000000000000000000000000000000000066
-:10AAF0000000000000000000000000000000000056
-:10AB00000000000000000000000000000000000045
-:10AB10000000000000000000000000000000000035
-:10AB20000000000000000000000000000000000025
-:10AB30000000000000000000000000000000000015
-:10AB40000000000000000000000000000000000005
-:10AB500000000000000000000000000000000000F5
-:10AB600000000000000000000000000000000000E5
-:10AB700000000000000000000000000000000000D5
-:10AB800000000000000000000000000000000000C5
-:10AB900000000000000000000000000000000000B5
-:10ABA00000000000000000000000000000000000A5
-:10ABB0000000000000000000000000000000000095
-:10ABC0000000000000000000000000000000000085
-:10ABD0000000000000000000000000000000000075
-:10ABE0000000000000000000000000000000000065
-:10ABF0000000000000000000000000000000000055
-:10AC00000000000000000000000000000000000044
-:10AC10000000000000000000000000000000000034
-:10AC20000000000000000000000000000000000024
-:10AC30000000000000000000000000000000000014
-:10AC40000000000000000000000000000000000004
-:10AC500000000000000000000000000000000000F4
-:10AC600000000000000000000000000000000000E4
-:10AC700000000000000000000000000000000000D4
-:10AC800000000000000000000000000000000000C4
-:10AC900000000000000000000000000000000000B4
-:10ACA00000000000000000000000000000000000A4
-:10ACB0000000000000000000000000000000000094
-:10ACC0000000000000000000000000000000000084
-:10ACD0000000000000000000000000000000000074
-:10ACE0000000000000000000000000000000000064
-:10ACF0000000000000000000000000000000000054
-:10AD00000000000000000000000000000000000043
-:10AD10000000000000000000000000000000000033
-:10AD20000000000000000000000000000000000023
-:10AD30000000000000000000000000000000000013
-:10AD40000000000000000000000000000000000003
-:10AD500000000000000000000000000000000000F3
-:10AD600000000000000000000000000000000000E3
-:10AD700000000000000000000000000000000000D3
-:10AD800000000000000000000000000000000000C3
-:10AD900000000000000000000000000000000000B3
-:10ADA00000000000000000000000000000000000A3
-:10ADB0000000000000000000000000000000000093
-:10ADC0000000000000000000000000000000000083
-:10ADD0000000000000000000000000000000000073
-:10ADE0000000000000000000000000000000000063
-:10ADF0000000000000000000000000000000000053
-:10AE00000000000000000000000000000000000042
-:10AE10000000000000000000000000000000000032
-:10AE20000000000000000000000000000000000022
-:10AE30000000000000000000000000000000000012
-:10AE40000000000000000000000000000000000002
-:10AE500000000000000000000000000000000000F2
-:10AE600000000000000000000000000000000000E2
-:10AE700000000000000000000000000000000000D2
-:10AE800000000000000000000000000000000000C2
-:10AE900000000000000000000000000000000000B2
-:10AEA00000000000000000000000000000000000A2
-:10AEB0000000000000000000000000000000000092
-:10AEC0000000000000000000000000000000000082
-:10AED0000000000000000000000000000000000072
-:10AEE0000000000000000000000000000000000062
-:10AEF0000000000000000000000000000000000052
-:10AF00000000000000000000000000000000000041
-:10AF10000000000000000000000000000000000031
-:10AF20000000000000000000000000000000000021
-:10AF30000000000000000000000000000000000011
-:10AF40000000000000000000000000000000000001
-:10AF500000000000000000000000000000000000F1
-:10AF600000000000000000000000000000000000E1
-:10AF700000000000000000000000000000000000D1
-:10AF800000000000000000000000000000000000C1
-:10AF900000000000000000000000000000000000B1
-:10AFA00000000000000000000000000000000000A1
-:10AFB0000000000000000000000000000000000091
-:10AFC0000000000000000000000000000000000081
-:10AFD0000000000000000000000000000000000071
-:10AFE0000000000000000000000000000000000061
-:10AFF0000000000000000000000000000000000051
-:10B000000000000000000000000000000000000040
-:10B010000000000000000000000000000000000030
-:10B020000000000000000000000000000000000020
-:10B030000000000000000000000000000000000010
-:10B040000000000000000000000000000000000000
-:10B0500000000000000000000000000000000000F0
-:10B0600000000000000000000000000000000000E0
-:10B0700000000000000000000000000000000000D0
-:10B0800000000000000000000000000000000000C0
-:10B0900000000000000000000000000000000000B0
-:10B0A00000000000000000000000000000000000A0
-:10B0B0000000000000000000000000000000000090
-:10B0C0000000000000000000000000000000000080
-:10B0D0000000000000000000000000000000000070
-:10B0E0000000000000000000000000000000000060
-:10B0F0000000000000000000000000000000000050
-:10B10000000000000000000000000000000000003F
-:10B11000000000000000000000000000000000002F
-:10B12000000000000000000000000000000000001F
-:10B13000000000000000000000000000000000000F
-:10B1400000000000000000000000000000000000FF
-:10B1500000000000000000000000000000000000EF
-:10B1600000000000000000000000000000000000DF
-:10B1700000000000000000000000000000000000CF
-:10B1800000000000000000000000000000000000BF
-:10B1900000000000000000000000000000000000AF
-:10B1A000000000000000000000000000000000009F
-:10B1B000000000000000000000000000000000008F
-:10B1C000000000000000000000000000000000007F
-:10B1D000000000000000000000000000000000006F
-:10B1E000000000000000000000000000000000005F
-:10B1F000000000000000000000000000000000004F
-:10B20000000000000000000000000000000000003E
-:10B21000000000000000000000000000000000002E
-:10B22000000000000000000000000000000000001E
-:10B23000000000000000000000000000000000000E
-:10B2400000000000000000000000000000000000FE
-:10B2500000000000000000000000000000000000EE
-:10B2600000000000000000000000000000000000DE
-:10B2700000000000000000000000000000000000CE
-:10B2800000000000000000000000000000000000BE
-:10B2900000000000000000000000000000000000AE
-:10B2A000000000000000000000000000000000009E
-:10B2B000000000000000000000000000000000008E
-:10B2C000000000000000000000000000000000007E
-:10B2D000000000000000000000000000000000006E
-:10B2E000000000000000000000000000000000005E
-:10B2F000000000000000000000000000000000004E
-:10B30000000000000000000000000000000000003D
-:10B31000000000000000000000000000000000002D
-:10B32000000000000000000000000000000000001D
-:10B33000000000000000000000000000000000000D
-:10B3400000000000000000000000000000000000FD
-:10B3500000000000000000000000000000000000ED
-:10B3600000000000000000000000000000000000DD
-:10B3700000000000000000000000000000000000CD
-:10B3800000000000000000000000000000000000BD
-:10B3900000000000000000000000000000000000AD
-:10B3A000000000000000000000000000000000009D
-:10B3B000000000000000000000000000000000008D
-:10B3C000000000000000000000000000000000007D
-:10B3D000000000000000000000000000000000006D
-:10B3E000000000000000000000000000000000005D
-:10B3F000000000000000000000000000000000004D
-:10B40000000000000000000000000000000000003C
-:10B41000000000000000000000000000000000002C
-:10B42000000000000000000000000000000000001C
-:10B43000000000000000000000000000000000000C
-:10B4400000000000000000000000000000000000FC
-:10B4500000000000000000000000000000000000EC
-:10B4600000000000000000000000000000000000DC
-:10B4700000000000000000000000000000000000CC
-:10B4800000000000000000000000000000000000BC
-:10B4900000000000000000000000000000000000AC
-:10B4A000000000000000000000000000000000009C
-:10B4B000000000000000000000000000000000008C
-:10B4C000000000000000000000000000000000007C
-:10B4D000000000000000000000000000000000006C
-:10B4E000000000000000000000000000000000005C
-:10B4F000000000000000000000000000000000004C
-:10B50000000000000000000000000000000000003B
-:10B51000000000000000000000000000000000002B
-:10B52000000000000000000000000000000000001B
-:10B53000000000000000000000000000000000000B
-:10B5400000000000000000000000000000000000FB
-:10B5500000000000000000000000000000000000EB
-:10B5600000000000000000000000000000000000DB
-:10B5700000000000000000000000000000000000CB
-:10B5800000000000000000000000000000000000BB
-:10B5900000000000000000000000000000000000AB
-:10B5A000000000000000000000000000000000009B
-:10B5B000000000000000000000000000000000008B
-:10B5C000000000000000000000000000000000007B
-:10B5D000000000000000000000000000000000006B
-:10B5E000000000000000000000000000000000005B
-:10B5F000000000000000000000000000000000004B
-:10B60000000000000000000000000000000000003A
-:10B61000000000000000000000000000000000002A
-:10B62000000000000000000000000000000000001A
-:10B63000000000000000000000000000000000000A
-:10B6400000000000000000000000000000000000FA
-:10B6500000000000000000000000000000000000EA
-:10B6600000000000000000000000000000000000DA
-:10B6700000000000000000000000000000000000CA
-:10B6800000000000000000000000000000000000BA
-:10B6900000000000000000000000000000000000AA
-:10B6A000000000000000000000000000000000009A
-:10B6B000000000000000000000000000000000008A
-:10B6C000000000000000000000000000000000007A
-:10B6D000000000000000000000000000000000006A
-:10B6E000000000000000000000000000000000005A
-:10B6F000000000000000000000000000000000004A
-:10B700000000000000000000000000000000000039
-:10B710000000000000000000000000000000000029
-:10B720000000000000000000000000000000000019
-:10B730000000000000000000000000000000000009
-:10B7400000000000000000000000000000000000F9
-:10B7500000000000000000000000000000000000E9
-:10B7600000000000000000000000000000000000D9
-:10B7700000000000000000000000000000000000C9
-:10B7800000000000000000000000000000000000B9
-:10B7900000000000000000000000000000000000A9
-:10B7A0000000000000000000000000000000000099
-:10B7B0000000000000000000000000000000000089
-:10B7C0000000000000000000000000000000000079
-:10B7D0000000000000000000000000000000000069
-:10B7E0000000000000000000000000000000000059
-:10B7F0000000000000000000000000000000000049
-:10B800000000000000000000000000000000000038
-:10B810000000000000000000000000000000000028
-:10B820000000000000000000000000000000000018
-:10B830000000000000000000000000000000000008
-:10B8400000000000000000000000000000000000F8
-:10B8500000000000000000000000000000000000E8
-:10B8600000000000000000000000000000000000D8
-:10B8700000000000000000000000000000000000C8
-:10B8800000000000000000000000000000000000B8
-:10B8900000000000000000000000000000000000A8
-:10B8A0000000000000000000000000000000000098
-:10B8B0000000000000000000000000000000000088
-:10B8C0000000000000000000000000000000000078
-:10B8D0000000000000000000000000000000000068
-:10B8E0000000000000000000000000000000000058
-:10B8F0000000000000000000000000000000000048
-:10B900000000000000000000000000000000000037
-:10B910000000000000000000000000000000000027
-:10B920000000000000000000000000000000000017
-:10B930000000000000000000000000000000000007
-:10B9400000000000000000000000000000000000F7
-:10B9500000000000000000000000000000000000E7
-:10B9600000000000000000000000000000000000D7
-:10B9700000000000000000000000000000000000C7
-:10B9800000000000000000000000000000000000B7
-:10B9900000000000000000000000000000000000A7
-:10B9A0000000000000000000000000000000000097
-:10B9B0000000000000000000000000000000000087
-:10B9C0000000000000000000000000000000000077
-:10B9D0000000000000000000000000000000000067
-:10B9E0000000000000000000000000000000000057
-:10B9F0000000000000000000000000000000000047
-:10BA00000000000000000000000000000000000036
-:10BA10000000000000000000000000000000000026
-:10BA20000000000000000000000000000000000016
-:10BA30000000000000000000000000000000000006
-:10BA400000000000000000000000000000000000F6
-:10BA500000000000000000000000000000000000E6
-:10BA600000000000000000000000000000000000D6
-:10BA700000000000000000000000000000000000C6
-:10BA800000000000000000000000000000000000B6
-:10BA900000000000000000000000000000000000A6
-:10BAA0000000000000000000000000000000000096
-:10BAB0000000000000000000000000000000000086
-:10BAC0000000000000000000000000000000000076
-:10BAD0000000000000000000000000000000000066
-:10BAE0000000000000000000000000000000000056
-:10BAF0000000000000000000000000000000000046
-:10BB00000000000000000000000000000000000035
-:10BB10000000000000000000000000000000000025
-:10BB20000000000000000000000000000000000015
-:10BB30000000000000000000000000000000000005
-:10BB400000000000000000000000000000000000F5
-:10BB500000000000000000000000000000000000E5
-:10BB600000000000000000000000000000000000D5
-:10BB700000000000000000000000000000000000C5
-:10BB800000000000000000000000000000000000B5
-:10BB900000000000000000000000000000000000A5
-:10BBA0000000000000000000000000000000000095
-:10BBB0000000000000000000000000000000000085
-:10BBC0000000000000000000000000000000000075
-:10BBD0000000000000000000000000000000000065
-:10BBE0000000000000000000000000000000000055
-:10BBF0000000000000000000000000000000000045
-:10BC00000000000000000000000000000000000034
-:10BC10000000000000000000000000000000000024
-:10BC20000000000000000000000000000000000014
-:10BC30000000000000000000000000000000000004
-:10BC400000000000000000000000000000000000F4
-:10BC500000000000000000000000000000000000E4
-:10BC600000000000000000000000000000000000D4
-:10BC700000000000000000000000000000000000C4
-:10BC800000000000000000000000000000000000B4
-:10BC900000000000000000000000000000000000A4
-:10BCA0000000000000000000000000000000000094
-:10BCB0000000000000000000000000000000000084
-:10BCC0000000000000000000000000000000000074
-:10BCD0000000000000000000000000000000000064
-:10BCE0000000000000000000000000000000000054
-:10BCF0000000000000000000000000000000000044
-:10BD00000000000000000000000000000000000033
-:10BD10000000000000000000000000000000000023
-:10BD20000000000000000000000000000000000013
-:10BD30000000000000000000000000000000000003
-:10BD400000000000000000000000000000000000F3
-:10BD500000000000000000000000000000000000E3
-:10BD600000000000000000000000000000000000D3
-:10BD700000000000000000000000000000000000C3
-:10BD800000000000000000000000000000000000B3
-:10BD900000000000000000000000000000000000A3
-:10BDA0000000000000000000000000000000000093
-:10BDB0000000000000000000000000000000000083
-:10BDC0000000000000000000000000000000000073
-:10BDD0000000000000000000000000000000000063
-:10BDE0000000000000000000000000000000000053
-:10BDF0000000000000000000000000000000000043
-:10BE00000000000000000000000000000000000032
-:10BE10000000000000000000000000000000000022
-:10BE20000000000000000000000000000000000012
-:10BE30000000000000000000000000000000000002
-:10BE400000000000000000000000000000000000F2
-:10BE500000000000000000000000000000000000E2
-:10BE600000000000000000000000000000000000D2
-:10BE700000000000000000000000000000000000C2
-:10BE800000000000000000000000000000000000B2
-:10BE900000000000000000000000000000000000A2
-:10BEA0000000000000000000000000000000000092
-:10BEB0000000000000000000000000000000000082
-:10BEC0000000000000000000000000000000000072
-:10BED0000000000000000000000000000000000062
-:10BEE0000000000000000000000000000000000052
-:10BEF0000000000000000000000000000000000042
-:10BF00000000000000000000000000000000000031
-:10BF10000000000000000000000000000000000021
-:10BF20000000000000000000000000000000000011
-:10BF30000000000000000000000000000000000001
-:10BF400000000000000000000000000000000000F1
-:10BF500000000000000000000000000000000000E1
-:10BF600000000000000000000000000000000000D1
-:10BF700000000000000000000000000000000000C1
-:10BF800000000000000000000000000000000000B1
-:10BF900000000000000000000000000000000000A1
-:10BFA0000000000000000000000000000000000091
-:10BFB0000000000000000000000000000000000081
-:10BFC0000000000000000000000000000000000071
-:10BFD0000000000000000000000000000000000061
-:10BFE0000000000000000000000000000000000051
-:10BFF0000000000000000000000000000000000041
-:10C000000000000000000000000000000000000030
-:10C010000000000000000000000000000000000020
-:10C020000000000000000000000000000000000010
-:10C030000000000000000000000000000000000000
-:10C0400000000000000000000000000000000000F0
-:10C0500000000000000000000000000000000000E0
-:10C0600000000000000000000000000000000000D0
-:10C0700000000000000000000000000000000000C0
-:10C0800000000000000000000000000000000000B0
-:10C0900000000000000000000000000000000000A0
-:10C0A0000000000000000000000000000000000090
-:10C0B0000000000000000000000000000000000080
-:10C0C0000000000000000000000000000000000070
-:10C0D0000000000000000000000000000000000060
-:10C0E0000000000000000000000000000000000050
-:10C0F0000000000000000000000000000000000040
-:10C10000000000000000000000000000000000002F
-:10C11000000000000000000000000000000000001F
-:10C12000000000000000000000000000000000000F
-:10C1300000000000000000000000000000000000FF
-:10C1400000000000000000000000000000000000EF
-:10C1500000000000000000000000000000000000DF
-:10C1600000000000000000000000000000000000CF
-:10C1700000000000000000000000000000000000BF
-:10C1800000000000000000000000000000000000AF
-:10C19000000000000000000000000000000000009F
-:10C1A000000000000000000000000000000000008F
-:10C1B000000000000000000000000000000000007F
-:10C1C000000000000000000000000000000000006F
-:10C1D000000000000000000000000000000000005F
-:10C1E000000000000000000000000000000000004F
-:10C1F000000000000000000000000000000000003F
-:10C20000000000000000000000000000000000002E
-:10C21000000000000000000000000000000000001E
-:10C22000000000000000000000000000000000000E
-:10C2300000000000000000000000000000000000FE
-:10C2400000000000000000000000000000000000EE
-:10C2500000000000000000000000000000000000DE
-:10C2600000000000000000000000000000000000CE
-:10C2700000000000000000000000000000000000BE
-:10C2800000000000000000000000000000000000AE
-:10C29000000000000000000000000000000000009E
-:10C2A000000000000000000000000000000000008E
-:10C2B000000000000000000000000000000000007E
-:10C2C000000000000000000000000000000000006E
-:10C2D000000000000000000000000000000000005E
-:10C2E000000000000000000000000000000000004E
-:10C2F000000000000000000000000000000000003E
-:10C30000000000000000000000000000000000002D
-:10C31000000000000000000000000000000000001D
-:10C32000000000000000000000000000000000000D
-:10C3300000000000000000000000000000000000FD
-:10C3400000000000000000000000000000000000ED
-:10C3500000000000000000000000000000000000DD
-:10C3600000000000000000000000000000000000CD
-:10C3700000000000000000000000000000000000BD
-:10C3800000000000000000000000000000000000AD
-:10C39000000000000000000000000000000000009D
-:10C3A000000000000000000000000000000000008D
-:10C3B000000000000000000000000000000000007D
-:10C3C000000000000000000000000000000000006D
-:10C3D000000000000000000000000000000000005D
-:10C3E000000000000000000000000000000000004D
-:10C3F000000000000000000000000000000000003D
-:10C40000000000000000000000000000000000002C
-:10C41000000000000000000000000000000000001C
-:10C42000000000000000000000000000000000000C
-:10C4300000000000000000000000000000000000FC
-:10C4400000000000000000000000000000000000EC
-:10C4500000000000000000000000000000000000DC
-:10C4600000000000000000000000000000000000CC
-:10C4700000000000000000000000000000000000BC
-:10C4800000000000000000000000000000000000AC
-:10C49000000000000000000000000000000000009C
-:10C4A000000000000000000000000000000000008C
-:10C4B000000000000000000000000000000000007C
-:10C4C000000000000000000000000000000000006C
-:10C4D000000000000000000000000000000000005C
-:10C4E000000000000000000000000000000000004C
-:10C4F000000000000000000000000000000000003C
-:10C50000000000000000000000000000000000002B
-:10C51000000000000000000000000000000000001B
-:10C52000000000000000000000000000000000000B
-:10C5300000000000000000000000000000000000FB
-:10C5400000000000000000000000000000000000EB
-:10C5500000000000000000000000000000000000DB
-:10C5600000000000000000000000000000000000CB
-:10C5700000000000000000000000000000000000BB
-:10C5800000000000000000000000000000000000AB
-:10C59000000000000000000000000000000000009B
-:10C5A000000000000000000000000000000000008B
-:10C5B000000000000000000000000000000000007B
-:10C5C000000000000000000000000000000000006B
-:10C5D000000000000000000000000000000000005B
-:10C5E000000000000000000000000000000000004B
-:10C5F000000000000000000000000000000000003B
-:10C60000000000000000000000000000000000002A
-:10C61000000000000000000000000000000000001A
-:10C62000000000000000000000000000000000000A
-:10C6300000000000000000000000000000000000FA
-:10C6400000000000000000000000000000000000EA
-:10C6500000000000000000000000000000000000DA
-:10C6600000000000000000000000000000000000CA
-:10C6700000000000000000000000000000000000BA
-:10C6800000000000000000000000000000000000AA
-:10C69000000000000000000000000000000000009A
-:10C6A000000000000000000000000000000000008A
-:10C6B000000000000000000000000000000000007A
-:10C6C000000000000000000000000000000000006A
-:10C6D000000000000000000000000000000000005A
-:10C6E000000000000000000000000000000000004A
-:10C6F000000000000000000000000000000000003A
-:10C700000000000000000000000000000000000029
-:10C710000000000000000000000000000000000019
-:10C720000000000000000000000000000000000009
-:10C7300000000000000000000000000000000000F9
-:10C7400000000000000000000000000000000000E9
-:10C7500000000000000000000000000000000000D9
-:10C7600000000000000000000000000000000000C9
-:10C7700000000000000000000000000000000000B9
-:10C7800000000000000000000000000000000000A9
-:10C790000000000000000000000000000000000099
-:10C7A0000000000000000000000000000000000089
-:10C7B0000000000000000000000000000000000079
-:10C7C0000000000000000000000000000000000069
-:10C7D0000000000000000000000000000000000059
-:10C7E0000000000000000000000000000000000049
-:10C7F0000000000000000000000000000000000039
-:10C800000000000000000000000000000000000028
-:10C810000000000000000000000000000000000018
-:10C820000000000000000000000000000000000008
-:10C8300000000000000000000000000000000000F8
-:10C8400000000000000000000000000000000000E8
-:10C8500000000000000000000000000000000000D8
-:10C8600000000000000000000000000000000000C8
-:10C8700000000000000000000000000000000000B8
-:10C8800000000000000000000000000000000000A8
-:10C890000000000000000000000000000000000098
-:10C8A0000000000000000000000000000000000088
-:10C8B0000000000000000000000000000000000078
-:10C8C0000000000000000000000000000000000068
-:10C8D0000000000000000000000000000000000058
-:10C8E0000000000000000000000000000000000048
-:10C8F0000000000000000000000000000000000038
-:10C900000000000000000000000000000000000027
-:10C910000000000000000000000000000000000017
-:10C920000000000000000000000000000000000007
-:10C9300000000000000000000000000000000000F7
-:10C9400000000000000000000000000000000000E7
-:10C9500000000000000000000000000000000000D7
-:10C9600000000000000000000000000000000000C7
-:10C9700000000000000000000000000000000000B7
-:10C9800000000000000000000000000000000000A7
-:10C990000000000000000000000000000000000097
-:10C9A0000000000000000000000000000000000087
-:10C9B0000000000000000000000000000000000077
-:10C9C0000000000000000000000000000000000067
-:10C9D0000000000000000000000000000000000057
-:10C9E0000000000000000000000000000000000047
-:10C9F0000000000000000000000000000000000037
-:10CA00000000000000000000000000000000000026
-:10CA10000000000000000000000000000000000016
-:10CA20000000000000000000000000000000000006
-:10CA300000000000000000000000000000000000F6
-:10CA400000000000000000000000000000000000E6
-:10CA500000000000000000000000000000000000D6
-:10CA600000000000000000000000000000000000C6
-:10CA700000000000000000000000000000000000B6
-:10CA800000000000000000000000000000000000A6
-:10CA90000000000000000000000000000000000096
-:10CAA0000000000000000000000000000000000086
-:10CAB0000000000000000000000000000000000076
-:10CAC0000000000000000000000000000000000066
-:10CAD0000000000000000000000000000000000056
-:10CAE0000000000000000000000000000000000046
-:10CAF0000000000000000000000000000000000036
-:10CB00000000000000000000000000000000000025
-:10CB10000000000000000000000000000000000015
-:10CB20000000000000000000000000000000000005
-:10CB300000000000000000000000000000000000F5
-:10CB400000000000000000000000000000000000E5
-:10CB500000000000000000000000000000000000D5
-:10CB600000000000000000000000000000000000C5
-:10CB700000000000000000000000000000000000B5
-:10CB800000000000000000000000000000000000A5
-:10CB90000000000000000000000000000000000095
-:10CBA0000000000000000000000000000000000085
-:10CBB0000000000000000000000000000000000075
-:10CBC0000000000000000000000000000000000065
-:10CBD0000000000000000000000000000000000055
-:10CBE0000000000000000000000000000000000045
-:10CBF0000000000000000000000000000000000035
-:10CC00000000000000000000000000000000000024
-:10CC10000000000000000000000000000000000014
-:10CC20000000000000000000000000000000000004
-:10CC300000000000000000000000000000000000F4
-:10CC400000000000000000000000000000000000E4
-:10CC500000000000000000000000000000000000D4
-:10CC600000000000000000000000000000000000C4
-:10CC700000000000000000000000000000000000B4
-:10CC800000000000000000000000000000000000A4
-:10CC90000000000000000000000000000000000094
-:10CCA0000000000000000000000000000000000084
-:10CCB0000000000000000000000000000000000074
-:10CCC0000000000000000000000000000000000064
-:10CCD0000000000000000000000000000000000054
-:10CCE0000000000000000000000000000000000044
-:10CCF0000000000000000000000000000000000034
-:10CD00000000000000000000000000000000000023
-:10CD10000000000000000000000000000000000013
-:10CD20000000000000000000000000000000000003
-:10CD300000000000000000000000000000000000F3
-:10CD400000000000000000000000000000000000E3
-:10CD500000000000000000000000000000000000D3
-:10CD600000000000000000000000000000000000C3
-:10CD700000000000000000000000000000000000B3
-:10CD800000000000000000000000000000000000A3
-:10CD90000000000000000000000000000000000093
-:10CDA0000000000000000000000000000000000083
-:10CDB0000000000000000000000000000000000073
-:10CDC0000000000000000000000000000000000063
-:10CDD0000000000000000000000000000000000053
-:10CDE0000000000000000000000000000000000043
-:10CDF0000000000000000000000000000000000033
-:10CE00000000000000000000000000000000000022
-:10CE10000000000000000000000000000000000012
-:10CE20000000000000000000000000000000000002
-:10CE300000000000000000000000000000000000F2
-:10CE400000000000000000000000000000000000E2
-:10CE500000000000000000000000000000000000D2
-:10CE600000000000000000000000000000000000C2
-:10CE700000000000000000000000000000000000B2
-:10CE800000000000000000000000000000000000A2
-:10CE90000000000000000000000000000000000092
-:10CEA0000000000000000000000000000000000082
-:10CEB0000000000000000000000000000000000072
-:10CEC0000000000000000000000000000000000062
-:10CED0000000000000000000000000000000000052
-:10CEE0000000000000000000000000000000000042
-:10CEF0000000000000000000000000000000000032
-:10CF00000000000000000000000000000000000021
-:10CF10000000000000000000000000000000000011
-:10CF20000000000000000000000000000000000001
-:10CF300000000000000000000000000000000000F1
-:10CF400000000000000000000000000000000000E1
-:10CF500000000000000000000000000000000000D1
-:10CF600000000000000000000000000000000000C1
-:10CF700000000000000000000000000000000000B1
-:10CF800000000000000000000000000000000000A1
-:10CF90000000000000000000000000000000000091
-:10CFA0000000000000000000000000000000000081
-:10CFB0000000000000000000000000000000000071
-:10CFC0000000000000000000000000000000000061
-:10CFD0000000000000000000000000000000000051
-:10CFE0000000000000000000000000000000000041
-:10CFF0000000000000000000000000000000000031
-:10D000000000000000000000000000000000000020
-:10D010000000000000000000000000000000000010
-:10D020000000000000000000000000000000000000
-:10D0300000000000000000000000000000000000F0
-:10D0400000000000000000000000000000000000E0
-:10D0500000000000000000000000000000000000D0
-:10D0600000000000000000000000000000000000C0
-:10D0700000000000000000000000000000000000B0
-:10D0800000000000000000000000000000000000A0
-:10D090000000000000000000000000000000000090
-:10D0A0000000000000000000000000000000000080
-:10D0B0000000000000000000000000000000000070
-:10D0C0000000000000000000000000000000000060
-:10D0D0000000000000000000000000000000000050
-:10D0E0000000000000000000000000000000000040
-:10D0F0000000000000000000000000000000000030
-:10D10000000000000000000000000000000000001F
-:10D11000000000000000000000000000000000000F
-:10D1200000000000000000000000000000000000FF
-:10D1300000000000000000000000000000000000EF
-:10D1400000000000000000000000000000000000DF
-:10D1500000000000000000000000000000000000CF
-:10D1600000000000000000000000000000000000BF
-:10D1700000000000000000000000000000000000AF
-:10D18000000000000000000000000000000000009F
-:10D19000000000000000000000000000000000008F
-:10D1A000000000000000000000000000000000007F
-:10D1B000000000000000000000000000000000006F
-:10D1C000000000000000000000000000000000005F
-:10D1D000000000000000000000000000000000004F
-:10D1E000000000000000000000000000000000003F
-:10D1F000000000000000000000000000000000002F
-:10D20000000000000000000000000000000000001E
-:10D21000000000000000000000000000000000000E
-:10D2200000000000000000000000000000000000FE
-:10D2300000000000000000000000000000000000EE
-:10D2400000000000000000000000000000000000DE
-:10D2500000000000000000000000000000000000CE
-:10D2600000000000000000000000000000000000BE
-:10D2700000000000000000000000000000000000AE
-:10D28000000000000000000000000000000000009E
-:10D29000000000000000000000000000000000008E
-:10D2A000000000000000000000000000000000007E
-:10D2B000000000000000000000000000000000006E
-:10D2C000000000000000000000000000000000005E
-:10D2D000000000000000000000000000000000004E
-:10D2E000000000000000000000000000000000003E
-:10D2F000000000000000000000000000000000002E
-:10D30000000000000000000000000000000000001D
-:10D31000000000000000000000000000000000000D
-:10D3200000000000000000000000000000000000FD
-:10D330000000000010000003000000000000000DCD
-:10D340000000000D3C02080024427A603C03080003
-:10D3500024637AD8AC4000000043202B1480FFFDEA
-:10D36000244200043C1D080037BD9FFC03A0F021AF
-:10D370003C100800261031D83C1C0800279C7A601D
-:10D380000E001253000000000000000D3C0280005F
-:10D3900030A5FFFF30C600FF344301803C08800009
-:10D3A0008D0901B80520FFFE00000000AC640000FC
-:10D3B00024040002A4650008A066000AA064000B13
-:10D3C000AC6700183C03100003E00008AD0301B88F
-:10D3D0003C0560008CA24FF80440FFFE00000000F6
-:10D3E000ACA44FC03C0310003C040200ACA44FC4EA
-:10D3F00003E00008ACA34FF827BDFFE8AFBF00145F
-:10D40000AFB000100E0012A5008080213C048008FF
-:10D410003485008090A600052403FFFE0200202131
-:10D4200000C310248FBF00148FB00010A0A200050D
-:10D430000A0012AF27BD001827BDFFE8AFB00010EB
-:10D44000AFBF00140E000ED6008080213C0680087D
-:10D4500034C5008090A4000024020050308300FFF7
-:10D46000106200073C098000020020218FBF0014D9
-:10D470008FB00010AD2001800A000FC527BD001835
-:10D48000240801003C078000020020218FBF001407
-:10D490008FB00010ACE801800A000FC527BD00184E
-:10D4A00027BDFF883C088008AFBE0070AFB600689B
-:10D4B000AFB40060AFB00050AFBF0074AFB7006C46
-:10D4C000AFB50064AFB3005CAFB20058AFB1005469
-:10D4D000350500803C0780008CF1012890A40009EC
-:10D4E000ACE0008490A60005309000FF0000A02171
-:10D4F00000061827306200010000B02114400067C8
-:10D500000000F02190A9000024050020312400FF34
-:10D5100010850016240A0050108A008D00000000BB
-:10D520003C0C08008D8C00DC258B00013C010800C0
-:10D53000AC2B00DC0E00139B000000008FBF0074BA
-:10D540008FBE00708FB7006C8FB600688FB5006417
-:10D550008FB400608FB3005C8FB200588FB100545D
-:10D560008FB0005003E0000827BD00780000000DD8
-:10D570003C158000AFA0003096A201168EB90104C0
-:10D580003C1F002036B20C00033FC0240018B82B0B
-:10D5900000173140AFA600308EAE01043053FFFFBC
-:10D5A0003C0F00400272382101CF682490F2000D38
-:10D5B00011A0004834C4004032430020146000022F
-:10D5C000348600800080302114C00094AFA6003063
-:10D5D0003C0980083525008090A8000831060040ED
-:10D5E00050C000063C088008240A0004120A00A368
-:10D5F000240B0012120B00293C088008351501008D
-:10D600003C17800096F3011A94EE000E92AF0008CA
-:10D61000324C00043275FFFF01EE6804AFAD003CF0
-:10D620008CF30004118000318CF700083503008072
-:10D63000907800083307004014E000280000000044
-:10D640008C72005002728823062000063C0680007F
-:10D650008C7F0034027FC823072200848E8200085A
-:10D660003C068000ACC00044240200018FBF00745F
-:10D670008FBE00708FB7006C8FB600688FB50064E6
-:10D680008FB400608FB3005C8FB200588FB100542C
-:10D690008FB0005003E0000827BD00780E000CB8E2
-:10D6A000000020218FBF00748FBE00708FB7006C08
-:10D6B0008FB600688FB500648FB400608FB3005CD4
-:10D6C0008FB200588FB100548FB0005003E00008B3
-:10D6D00027BD00780A000D1800C020210E00146C30
-:10D6E000026020211440FFDF3C0680003C038008DC
-:10D6F000346300808C6400340264102304400018FA
-:10D70000000000003C1408008E94310026900001B7
-:10D710003C010800AC3031000E0012A5022020218F
-:10D720003C048008349F008093FE002502202021C5
-:10D7300037C90004A3E900250E0012AF0000000065
-:10D740000E000C9E022020210A000D45240200013B
-:10D750003C14080026947AC80A000D073C15800086
-:10D760008C6800300268302318C00008240B000CBD
-:10D770003C0908008D293100325200FC0000A8212C
-:10D78000252500013C010800AC253100AFAB00307D
-:10D790008C6A003001534023190000E002A8602A7F
-:10D7A0001580FFDD0000000012A8002A02A87823DF
-:10D7B0000268982131F5FFFF3247000210E0003483
-:10D7C000325900103C13800836700080921E000809
-:10D7D00033D6004052C000D38E82000802202021A0
-:10D7E0000E0012A524120018A212000992170005BB
-:10D7F0002418FFFE0220202102F8A8240E0012AFF8
-:10D80000A215000524040039000028210E00144749
-:10D81000240600180A000D45240200019296000C0F
-:10D820003C048008349E00808FC700380016A30097
-:10D830003690008130C600FF022020210E000C8DA2
-:10D840003205F0813C068000ACC000440A000D4562
-:10D85000240200013A4E000131CD000115A0FFAEB7
-:10D86000026898210A000D97000000000040F809A6
-:10D87000240400160A000D45240200010220202184
-:10D880000E00152900E028210A000CFA8FBF007451
-:10D890001320FF733C048008348900808D230038F6
-:10D8A0008C82000402E2F8231FE0FF6E3C06800039
-:10D8B00002E3302304C200010060B821AFA80018C1
-:10D8C0003C198000AFB30010AFB5001497260120BB
-:10D8D0008D2A00309524005C8FB8003C8FAD00305D
-:10D8E0003087FFFF30DFFFFF03E87021372F400054
-:10D8F0000307282B8E82000401CF602101A5582543
-:10D90000AFA90048AFAC0020AFAA0028AFAB0030F1
-:10D91000AFAA0024AFA0002CAFB700340040F80934
-:10D9200027A400108FA8003031030002106000020D
-:10D930008FA90048325200FE912300083069004050
-:10D94000512000138FA400243C0280088C4800045E
-:10D95000111700A4240A0014325800015300000CCF
-:10D960008FA400242419000C121900C02A1F000DD6
-:10D9700013E000BA2406000E2404000A5204000139
-:10D98000241600088FA9002425240001AFA4002438
-:10D990003C188008370500808FA700148CAF00303A
-:10D9A000340CFFFF00877021ACAE0030AFAF003801
-:10D9B00090AD004E8CAB00308FA8003C01AC100441
-:10D9C00001625021ACAA00348FA6003002E8202169
-:10D9D00030C300081060000BAFA400408CB90020D9
-:10D9E0001324008F30C600FF9289000C8FA70034EB
-:10D9F00000098300360400803085F0800E000C8D15
-:10DA0000022020213C0A8008355000808E0300301F
-:10DA10008FA800380068302318C00065262F0080CA
-:10DA20003C0E08008DCE31982407FF8001E7682462
-:10DA300031EC007F3C0680003C02800431CB0010BA
-:10DA4000ACCD00901160003B0182282190B8006BA2
-:10DA5000570000393C048008241F0001A0BF006B60
-:10DA600094C5007A24B9000AA61900123C0A80085D
-:10DA70003545008090A800083110004016000004D1
-:10DA80003C038008324B00011560006B0000000071
-:10DA9000346400808C8C00208FB200401192000909
-:10DAA000346301008C6D0000026D102318400012D9
-:10DAB0008FB80040241E0001AC980020AC73000019
-:10DAC000AC77000416C0002D0000000017C000272E
-:10DAD0000000000012A00005000018218FA50030F2
-:10DAE00030B5000452A0FE9500601021240300010F
-:10DAF0000A000CF9006010218C6E000015D3FFF1B4
-:10DB0000000000008C67000402E7782305E1FFE9CC
-:10DB10008FB800400A000E5B000000000A000D985C
-:10DB2000000040210040F809240400170A000D45B8
-:10DB3000240200013C04800834900080241E00016F
-:10DB4000022020210E0012A5A61E00129209002517
-:10DB500002202021241E0001352200010E0012AFF8
-:10DB6000A20200250A000E463C0A80080E000C9E08
-:10DB7000022020210A000E5F000000000E0012A506
-:10DB8000022020213C198008373700800220202104
-:10DB90000E0012AFA2F6000902C0302124040037A3
-:10DBA0000E001447000028210A000E5D000000004E
-:10DBB0008FA6001858C0FFAE3C0A80080E0012A5C0
-:10DBC000022020219203002502202021241E000192
-:10DBD000346200040E0012AFA20200250A000E46B5
-:10DBE0003C0A8008120A00302A0B0015116000243C
-:10DBF000240D0016240C000C560CFF58325800015E
-:10DC00003C05800890AF001B2407FFBD2416000EC2
-:10DC100001E77024A0AE001B0A000E01325800017B
-:10DC20003C1F800097E5011A50A0FF6F34C600101A
-:10DC30000A000E259289000C8CB300308E960008E5
-:10DC4000240400182674000102C0F809ACB40030A6
-:10DC50008FB100300A000CF9322200041606FF4A88
-:10DC60008FA900240A000E0C241600102410000EA8
-:10DC700052D0FF44241600100A000E0B2416001682
-:10DC8000560DFF36325800013C05800890AF001B4E
-:10DC90002407FFBD2416001001E77024A0AE001B6E
-:10DCA0000A000E01325800010A000E00241600126C
-:10DCB0003C0380008C6201B80440FFFE240408008D
-:10DCC000AC6401B803E00008000000003C058008D7
-:10DCD00094A200483084FFFF1040001924840012F1
-:10DCE00094A900483C0380003128FFFF0104382A32
-:10DCF00010E0001334660180946D01208F8C0004C5
-:10DD0000240B001A31AAFFFF31834000A0CB000B87
-:10DD1000106000102544FFFE94AF004831EEFFFF75
-:10DD200001C4282B14A0000C8F98000CA4C400146C
-:10DD30008F86000C34C2000103E00008AF82000CA3
-:10DD40003C0780002404000334E2018003E0000863
-:10DD5000A044000B8F98000C2419FFFE0319102417
-:10DD600003E00008AF82000C27BDFFD8AFB400204D
-:10DD7000AFB3001CAFB20018AFB10014AFBF0024A6
-:10DD8000AFB000100080182130B3FFFF30D2FFFF8A
-:10DD900030F4FFFF3C1180008E2201B80440FFFEEA
-:10DDA00036300180AE030000024020210E000EDD5F
-:10DDB000AE2300208F86000C8F8500048F83000027
-:10DDC00030C48000A613000CA612000EA605001099
-:10DDD000AE030028A61400081080000E3C0F80003F
-:10DDE000962C0116318BFFFC256A00040151482155
-:10DDF0008D2840003107FFFF14E000072414BFFF07
-:10DE00003C0EFFFF35CD7FFF00CD3024AF86000CE8
-:10DE10003C0F80002414BFFF35F1018000D498240A
-:10DE2000A63300268DF20104AE32002C3C06100011
-:10DE3000ADE601B88FBF00248FB400208FB3001C63
-:10DE40008FB200188FB100148FB0001003E00008EB
-:10DE500027BD002827BDFFD8AFB100143C118000BA
-:10DE600000804021AFB40020AFB0001030D4FFFFDD
-:10DE70003630018002802021AE080000AE2800204C
-:10DE8000AFB3001CAFB2001830F3FFFFAFBF0024E8
-:10DE90000E000EDD30B2FFFF8F85000C8F83000473
-:10DEA0002406BFFF00A62024A612000CA614000E14
-:10DEB000A6130008A6040026A60300103C021000CA
-:10DEC000AE2201B88FBF00248FB400208FB3001C96
-:10DED0008FB200188FB100148FB0001003E000085B
-:10DEE00027BD00283C028000344501803C048000AE
-:10DEF0008C8301B80460FFFE240720002406000282
-:10DF0000A4A70008A0A6000BA4A000103C051000C8
-:10DF1000AC8501B803E00008000000003C0580006B
-:10DF200034A400708C8A000090A601128F84000433
-:10DF300027BDFFF030C300FF0003188230820100CC
-:10DF4000000038211040003924660003308740006B
-:10DF500050E0003930882000000610800045C821BC
-:10DF60008F2F40002478000400187080AFAF0000AD
-:10DF700001C568218DAC4000AFAC000494AB011624
-:10DF80003169FFFC012540218D054000AFA5000847
-:10DF90008FA9000800003021000028213C0708005C
-:10DFA00024E701000A000F9E2408000890420000A8
-:10DFB00024A500012CAD000C0062C8210019C0800E
-:10DFC000030778218DEE000011A0000600CE302658
-:10DFD00003A5102114A8FFF500051A005520FFF431
-:10DFE000904200003C048000348700703C0508002B
-:10DFF0008CA531048CE300002CA80020110000093E
-:10E00000006A3823000558803C0C0800258C310834
-:10E01000016C482124AA0001AD2700003C01080042
-:10E02000AC2A3104AF8600002407000100E0102173
-:10E0300003E0000827BD00101100FFFC000038219C
-:10E0400000066080018558218D6440002469000429
-:10E0500000093880AFA4000000E518218C6640005C
-:10E06000AFA000080A000F8EAFA600043C02080013
-:10E070008C42003827BDFFD8AFB40020AFB20018E3
-:10E08000AFBF0024AFB3001CAFB10014AFB000109D
-:10E090003C14080026940038144000022452FFFF6C
-:10E0A000000090218F85000430A340001060000F15
-:10E0B00030A980003C06002000A620241080000B20
-:10E0C0008F87000C2408BFFF00A8282434E3100029
-:10E0D000AF85000430AF200015E0000A3C110004B9
-:10E0E0002413FFBF0A000FEF0073102415200062F5
-:10E0F0003C0B002030AF200011E0FFF98F83000CB3
-:10E100003C11000400B180241200FFF62413FFBF6D
-:10E110003462004030B801001300000FAF82000CE1
-:10E120003C1F002000BFC824132000053C0A8000CB
-:10E130003C03000400A31024104000C800000000AD
-:10E140009549011E9548011C3126FFFF00083C003F
-:10E1500000C72025AF8400003C0D800095AC010C69
-:10E1600030AB1000116000083186FFFF30AE002098
-:10E1700015C00006241100053C10100000B07824E2
-:10E1800015E000733C1F0C002411000130A20100B7
-:10E19000544000093C0C00018F83001454600006B9
-:10E1A0003C0C00018F87000C30E440001080009A86
-:10E1B0003C0A1F013C0C000100AC302414C0006C70
-:10E1C0003C1080008F84000C3093400012600006E9
-:10E1D0003C0310003C190F0000B9C0241300008B51
-:10E1E0003C1F80003C03100000A310241040002CB2
-:10E1F0003C0680003C0708008CE7003014E0007308
-:10E200003088400030A6010010C000983C0E0F007E
-:10E2100000AE68243C0C020011AC00948F93000007
-:10E22000027280240214782191F4000426920004E2
-:10E23000001221C03C0E800095C6010E3627000258
-:10E2400024D400043286FFFF240500020E000F04D0
-:10E25000000000008FBF00248FB400208FB3001C8B
-:10E260008FB200188FB100148FB000100000102181
-:10E2700003E0000827BD002800AB50241140FF9E9A
-:10E2800030AF20008F8C000C3C0EFFFF35CD7FFFA0
-:10E2900000AD2824358380000A000FDFAF8500041D
-:10E2A0008CD04000320F010011E0003C30B801007A
-:10E2B0003C1008008E1000241300001432330004B8
-:10E2C0003C020F0000A2F8243C19020013F9000FD1
-:10E2D0008F83000094C9010E022038210072582457
-:10E2E0000174502191480004252400043086FFFF6A
-:10E2F00025140004001421C0240500020E000F04A0
-:10E300002412FFFE021280243231FFFB2407000199
-:10E310001207006F3206000114C000903C0E80000E
-:10E32000320F000411E000048F980004331008003D
-:10E33000160000783C1F80005660FFC78FBF002486
-:10E340000E000F63000000000A0010408FBF002481
-:10E350003C190BFF00BFC0243733FFFF0278882B26
-:10E360005220FF8A241100010A00100D241100051B
-:10E370003C0E08008DCE00D8960F010E24040080BC
-:10E3800025CD000131E6FFFF240500023C01080015
-:10E39000AC2D00D80A00103D240700033C120800F1
-:10E3A0008E520024324200011040FFAB8FBF002488
-:10E3B00094C6010E362700020000202124D4000458
-:10E3C0003286FFFF0A00103D240500021100FF8E77
-:10E3D00030A601003C0B0F0000AB50243C090100AB
-:10E3E000012A202B1480FF88000000003C058000DB
-:10E3F00094A6010E362700022404008024D40004D1
-:10E400003286FFFF0A00103D2405000297E3011643
-:10E410000A0010243C03100000AA48243C08100005
-:10E420001528FF653C0C000130CB02001560FF632E
-:10E4300000AC30243C1480009692010E3627000276
-:10E44000000020212645000430A6FFFF0E000F3FEC
-:10E45000240500020A0010408FBF00240E000F7137
-:10E46000000000000A0010008F850004000000007A
-:10E470003C0608008CC600D0000516023050000F84
-:10E4800038DF00012FF900012E03000C0323C02404
-:10E490001700FF68001021C02608FFFC2D070004AC
-:10E4A00014E000073C0E800038CA00022D4900012C
-:10E4B000012320245080000E000532423C0E8000D3
-:10E4C00095C6010E000020210A00103A36270002EE
-:10E4D0003233000452600001363100023C0C8000EF
-:10E4E0009586010E022038210A0010990000202193
-:10E4F0000010182B00C358241560000F3C05800045
-:10E50000001021C03C0E800095C6010E0A00103A92
-:10E510003627000297F9010E022038212404010059
-:10E52000273100043226FFFF0E000F0424050002ED
-:10E530000A0010780000000094AD010E00002021B8
-:10E540002405000225AC00043186FFFF0E000F04F5
-:10E550003227FFFB0A0010EB001021C095C5010E09
-:10E56000022038210000202124AD000431A6FFFF45
-:10E570000E000F04240500020A0010723231FFFB66
-:10E580003C0580008CA701482403000434A60180C8
-:10E5900000072402308200FF104300103C0480007A
-:10E5A0008C8901B80520FFFE000000008C8F014817
-:10E5B000240D00023C0A1000000F7402A4CE0008D3
-:10E5C000A0CD000B8C8C0148A4CC00108C8B014496
-:10E5D000ACCB002403E00008AC8A01B88CA4014055
-:10E5E0003C03800000C028218C6601B804C0FFFEF7
-:10E5F0002408001CACA40000A0A8000B3C051000DF
-:10E60000AC6501B803E000080000000027BDFFE88A
-:10E61000AFB00010AFBF00143C10600C8E0D500066
-:10E62000240EFF7F2406000301AE60243588380CD9
-:10E630003C058000AE085000ACA600083C01080074
-:10E64000AC2000200E001555000000003C086016AC
-:10E650008D0A00003C0BFFFF3C0900103523805160
-:10E660003C046000014B38243C025353AE03537CFE
-:10E67000348420203C05080024A579082406000ADB
-:10E6800010E2000935037C008C7F007C8C790078D7
-:10E690008FB00010AF9F00108FBF001427BD00186F
-:10E6A0000A0013B1AF9900088D0F00043C186000F8
-:10E6B0008FB0001001F818218C7F007C8C790078D5
-:10E6C000AF9F00108FBF001427BD00180A0013B1C0
-:10E6D000AF9900083C0480008C8340003402FFFFA7
-:10E6E0001062003A000000008C87400030E5010015
-:10E6F00010A00021000000009487010E3C020800D9
-:10E700008C4200EC9485010E3C0D08008DAD31CC9F
-:10E7100030E3FFFF3C1808008F1800E83C090800B0
-:10E720008D2931C80043602130ABFFFF0183782B76
-:10E730000000C82101AB18210000502103197021ED
-:10E74000006B302B012A402101CF2021010610212E
-:10E750003C010800AC2C00EC3C010800AC2400E8B3
-:10E760003C010800AC2331CC3C010800AC2231C88C
-:10E7700003E00008000000008C8840008F8C000837
-:10E78000110C00323C0D800095AB010E3C0A0800D4
-:10E790008D4A00E43C0808008D0800E03169FFFF65
-:10E7A000014928210000302100A9602B01063821F1
-:10E7B00000EC10213C010800AC2500E43C010800FD
-:10E7C000AC2200E003E00008000000009483010E8A
-:10E7D0009482010E3C1908008F3900F43C090800AE
-:10E7E0008D2931CC3C0E08008DCE00F03C0808008D
-:10E7F0008D0831C83078FFFF304BFFFF03382821E8
-:10E80000012B1821000078210000502100B8682B4E
-:10E8100001CF6021006B302B010A3821018D2021AE
-:10E8200000E610213C010800AC2500F43C01080082
-:10E83000AC2400F03C010800AC2331CC3C010800C2
-:10E84000AC2231C803E00008000000008C894004BD
-:10E850008F8600101526FFCC3C0D80009483010E9E
-:10E860003C1908008F3931BC3C0E08008DCE31B800
-:10E870003078FFFF03385821000078210178202BE1
-:10E8800001CF682101A450213C010800AC2B31BC10
-:10E890003C010800AC2A31B803E000080000000089
-:10E8A00027BDFFE83C058000AFBF0014AFB00010EB
-:10E8B0008CB00128ACB000208CA301048CA4010012
-:10E8C000AF8300040E000ED6AF84000C0E00115F63
-:10E8D000000000003C0208008C4200C010400026EE
-:10E8E0008F8400043C0708008CE700C424E6000184
-:10E8F0003C010800AC2600C43C0280008C4401248A
-:10E900003C1F6020AFE40014000000003C068000C3
-:10E910003C034000ACC301380000000012000013AB
-:10E920008FBF0014260F0140261900802404FF80A9
-:10E9300001E4C0240324F824001F6940332E007F23
-:10E940000018594031EC007F3C0A20003548000295
-:10E9500001AE3825016C48250128802500E82825CE
-:10E96000ACC50830ACD008308FBF00148FB0001099
-:10E9700003E0000827BD00183C090010008940246E
-:10E980001100000F8F83000C240DBFFF006D602469
-:10E9900011800007240F87FF006F702415C000133B
-:10E9A0003C1900600099C024130000100000000012
-:10E9B0000E000CD2000000000A001221000000002E
-:10E9C0003C0B08008D6B0020256A00013C0108000B
-:10E9D000AC2A00200E000FC5000020211040FFCC03
-:10E9E0003C0680000A0011E93C0280000E00128EF5
-:10E9F000000000000A0012210000000027BDFFE80F
-:10EA00003C028000AFBF00108C4601403C03700008
-:10EA10003C054000AC4600208C4401480083202483
-:10EA20001085001300A4102B1040000B3C072000A1
-:10EA30003C08600010880017000000003C0A4000FD
-:10EA40003C098000AD2A0178000000008FBF001053
-:10EA500003E0000827BD00185487FFF93C0A400076
-:10EA60000E00110A000000000A00123A3C0A4000A1
-:10EA70000E0012B4000000003C0A40003C09800077
-:10EA8000AD2A0178000000008FBF001003E00008ED
-:10EA900027BD00180E001D6F000000000A00123A8A
-:10EAA0003C0A400027BDFFE0AFB200183C128000D6
-:10EAB000AFB10014AFBF001CAFB000100E00112D9D
-:10EAC000365100708E260000AF8600188E28000098
-:10EAD0003C0B08008D6B00FC3C0708008CE700F83D
-:10EAE00001066023016C28210000482100AC302B76
-:10EAF00000E91821006620213C010800AC2500FC3B
-:10EB00003C010800AC2400F88E50000032020003E3
-:10EB10001040FFEE010030218E2600003C05080069
-:10EB20008CA500FC3C1F08008FFF00F800C81823CC
-:10EB300000A378210000102101E3C82B03E2C021CB
-:10EB400003197021320D00013C010800AC2F00FCBC
-:10EB5000AF8800183C010800AC2E00F815A0000892
-:10EB600000000000320800021100FFD60000000083
-:10EB70000E001229000000000A00125B00000000D5
-:10EB80000E0011D2000000000A00128432080002B8
-:10EB90003C0380008C6401003082003E1440000879
-:10EBA00000000000AC6000488C66010030C507C062
-:10EBB00010A0000500000000AC60004CAC600050EC
-:10EBC00003E0000824020001AC600054AC60004087
-:10EBD0008C6801003107380010E0FFF900000000E8
-:10EBE0002402000103E00008AC6000443C039000F4
-:10EBF00034620001008220253C038000AC640020C8
-:10EC00008C65002004A0FFFE0000000003E0000867
-:10EC1000000000003C0280003443000100832025F6
-:10EC200003E00008AC44002027BDFFD8AFB10014BA
-:10EC30003C048000AFBF0020AFB3001CAFB200188F
-:10EC4000AFB000108C9201408C9001482402000E5D
-:10EC500000108C02322300FF1062005902042824A5
-:10EC60002866000F10C00013286A0037240700062A
-:10EC70001067008E286800075100002D2404000949
-:10EC8000106000783C06800024090001106900B083
-:10EC9000000000000000000D8FBF00208FB3001C9B
-:10ECA0008FB200188FB100148FB0001003E000087D
-:10ECB00027BD002811400059240D0038286B00356D
-:10ECC000116000053C058000240C001F146CFFF14E
-:10ECD000000000003C0580008CB801B80700FFFE72
-:10ECE00034B90180AF320000241F00012412000259
-:10ECF0003C021000AF200004A7310008A33F000A27
-:10ED0000A332000BA7300010AF200024AF20002852
-:10ED1000ACA201B88FBF00208FB3001C8FB20018C7
-:10ED20008FB100148FB0001003E0000827BD002849
-:10ED3000106400232405000B1465FFD63218FFFF72
-:10ED4000170000203C0580008F93FED4927F0005C1
-:10ED500033F900041720FFCF000000000E0012A5B9
-:10ED6000024020219269000502402021352800043C
-:10ED70000E0012AFA26800059267000530E20004A1
-:10ED800014400002000000000000000D926B000023
-:10ED900024060020316A00FF1546000A3C05800069
-:10EDA0008CA401B80480FFFE34AD0180240E000560
-:10EDB0003C0C1000ADB20000A1AE000BACAC01B831
-:10EDC0003C0580008CA301B80460FFFE34AF0180D5
-:10EDD00024130002ADE00000ADF20004A5F100082C
-:10EDE000A1F3000AA1F3000BA5F00010ADE0002490
-:10EDF0008CB101443C101000ADF10028ACB001B85A
-:10EE00008FBF00208FB3001C8FB200188FB1001489
-:10EE10008FB0001003E0000827BD0028106DFFAD83
-:10EE2000240E0080146EFF9B000000003C05800053
-:10EE30008CA301B80460FFFE34AF018024120002ED
-:10EE4000A1F2000BA5F10008A5F000108CB301445D
-:10EE50003C021000A5F30012ACA201B80A0012F0A7
-:10EE60008FBF00208CC301B80460FFFE34D3018043
-:10EE7000AE720000AE60000424120001A67100080A
-:10EE800024110002A272000AA271000BA6700010E9
-:10EE90008CD001443C0F1000AE700024AE600028FE
-:10EEA000ACCF01B80A00132B8FBF00203C038000B9
-:10EEB0008C6601B804C0FFFE346201803C06080085
-:10EEC00090C67AB8AC52000010C000030000382190
-:10EED0003C0708008CE77AC03C05800034AA01801A
-:10EEE0002404000234CC0001AC470004A551000802
-:10EEF000A14C000AA144000BA55000108CAB0144AA
-:10EF00000000202101402821AD4B002410C0000347
-:10EF10008FBF00203C0408008C847ABC8FB3001C97
-:10EF20008FB200188FB100148FB000103C0E10008B
-:10EF30003C0D800027BD0028ACA40028ADAE01B870
-:10EF40003C010800A0207AB803E00008000000009F
-:10EF500010A0000B3C0680008C980144241900028C
-:10EF60003C010800A0397AB83C010800AC327AC0F4
-:10EF70003C010800AC387ABC0A00132B8FBF00207C
-:10EF80008CDF01B807E0FFFE34C7018024090002CE
-:10EF9000ACE00000ACF20004A4F10008A0E9000A13
-:10EFA000A0E9000BA4F00010ACE000248CC80144E0
-:10EFB0003C021000ACE80028ACC201B80A00132BD8
-:10EFC0008FBF002027BDFFE8AFBF00100E000ED698
-:10EFD000000000003C0280008FBF001000002021D4
-:10EFE000AC4001800A000FC527BD00183084FFFF28
-:10EFF00030A5FFFF108000070000182130820001BB
-:10F000001040000200042042006518211480FFFB1C
-:10F010000005284003E000080060102110C0000730
-:10F02000000000008CA2000024C6FFFF24A50004FD
-:10F03000AC82000014C0FFFB2484000403E000083D
-:10F040000000000010A0000824A3FFFFAC86000011
-:10F0500000000000000000002402FFFF2463FFFF07
-:10F060001462FFFA2484000403E00008000000009A
-:10F0700027BDFFE0AFB20018AFB10014AFB0001071
-:10F08000AFBF001C9486000C00A0902124900014B7
-:10F0900000061B020003108000448821000030217C
-:10F0A00000A020210E0013BB240500050211202B17
-:10F0B0001080001200001021920300002C6500094E
-:10F0C00050A0000992020001000348803C0A080099
-:10F0D000254A793C012A40218D07000000E0000804
-:10F0E0000000000092020001020280210211202B88
-:10F0F0005480FFF292030000000010218FBF001C1B
-:10F100008FB200188FB100148FB0001003E0000818
-:10F1100027BD00200A0013D526100001920C000123
-:10F12000240B000C158B0040023070232DCD000AFB
-:10F1300015A0003D260800068E43000026020002AE
-:10F1400034640100AE440000921F00029059000197
-:10F15000904E0002904B0003001F7E000019C40077
-:10F1600001F86025000E6A00018D5025014B4825ED
-:10F17000AE490004920700069105000191040002C7
-:10F180009119000300071E00000534000066F825F1
-:10F190000004120003E2C025031978252610000A96
-:10F1A0000A0013D5AE4F0008921F0001260400028A
-:10F1B0002410000257F00001022020210A0013D57C
-:10F1C00000808021920E0001240D000315CDFFCB9D
-:10F1D000240200018E59000092180002261000033C
-:10F1E000372F0008A25800100A0013D5AE4F0000B8
-:10F1F000920500012406000414A6FFC024020001A9
-:10F20000920C0002920B00038E490000000C520089
-:10F21000014B40253527000426100004AE48000CA1
-:10F220000A0013D5AE4700000A0013E924020001CA
-:10F2300027BDFFE8AFBF0014AFB000100E0012A54D
-:10F24000008080213C048008348300809065002584
-:10F250000200202134A200200E0012AFA06200257F
-:10F26000020020218FBF00148FB000100A000C9EF6
-:10F2700027BD00183C03800027BDFFF834620180E1
-:10F28000AFA20000308C00FF30AD00FF30CE00FF99
-:10F290003C0B80008D6401B80480FFFE000000007C
-:10F2A0008FA900008D6801288FAA00008FA7000099
-:10F2B0008FA400002405000124020002A085000A9A
-:10F2C0008FA30000359940003C051000A062000BA0
-:10F2D0008FB800008FAC00008FA600008FAF000039
-:10F2E00027BD0008AD280000AD400004AD8000241B
-:10F2F000ACC00028A4F90008A70D0010A5EE00126C
-:10F3000003E00008AD6501B83C06800827BDFFE8B2
-:10F3100034C50080AFBF001090A70009240200127E
-:10F3200030E300FF1062000B008030218CA80050F9
-:10F3300000882023048000088FBF00108CAA0034AE
-:10F34000240400390000282100CA482305200005B4
-:10F35000240600128FBF00102402000103E0000801
-:10F3600027BD00180E001447000000008FBF0010DA
-:10F370002402000103E0000827BD001827BDFFC8D4
-:10F38000AFB1002C00A08821AFB2003027A500103B
-:10F390000080902102202021AFBF00340E0013C650
-:10F3A000AFB00028144000813C0C8008918B001104
-:10F3B000918A0012358600808CC80054316500FFA8
-:10F3C000314900FF00A9282100A8382B14E0004F84
-:10F3D0008FA3001094DF005C3066000410C000565C
-:10F3E00033E4FFFF8FA2001C0082102B5440000565
-:10F3F0002C8300803067000414E0007E240402188F
-:10F400002C83008010600002008080212410008086
-:10F410000E0012A5024020213C03800834660080C3
-:10F4200024070001ACC7000C90C200080010604027
-:10F4300034670100305F007FA0DF00088E390004D0
-:10F4400027380001ACD80030A4D0005C8CCE003C42
-:10F45000962F000E01CF6821ACCD00208CCB003C54
-:10F46000016C5021ACCA001C8E290004ACE90000DC
-:10F470008E250008ACE500048FA8001031040008B8
-:10F480005480002F93A60020A0C0004E90C5004ECF
-:10F490002408FFDF3C188008A0E5000890C400089D
-:10F4A000370C00802409005000888024A0D0000878
-:10F4B0008E390008AD9900388F0E00148D8F003002
-:10F4C00001CF6821AD8D0034918B0000316A00FFBF
-:10F4D00011490029264801000E0012AF02402021E8
-:10F4E00024040038000028210E0014472406000AD6
-:10F4F0008FBF00348FB200308FB1002C8FB0002846
-:10F500002402000103E0000827BD003894D8005C05
-:10F510008CD00054330EFFFF0205782301CF682BF7
-:10F5200015A0FFAC8FA300108CD9005430660004E6
-:10F5300014C0FFAC032520230A0014A52C82021856
-:10F540003C188008370C0080A0E600088E390008BF
-:10F5500024090050AD9900388F0E00148D8F0030B3
-:10F5600001CF6821AD8D0034918B0000316A00FF1E
-:10F570001549FFD9264801002406FF8001062824EA
-:10F580003C048000AC8500288E2700083103007FF2
-:10F590003C10800C0070F821AFE700D08E220008EC
-:10F5A000AF9F00240A0014E0AFE200D48E230008CD
-:10F5B0003C04800834820080AC4300540240202187
-:10F5C0000E001436AC400030240400382405008DB1
-:10F5D0000E001447240600128FBF00348FB2003093
-:10F5E0008FB1002C8FB000282402000103E0000836
-:10F5F00027BD00380A0014AA8FA4001C27BDFFE80D
-:10F60000AFBF001090A6000D30C7001010E0000C36
-:10F61000008040213C0280088C4400048CA3000838
-:10F620001064000830C9000430C5000410A0001C9C
-:10F630008FBF00102402000103E0000827BD00185E
-:10F6400030C900041120001030CB001210E0FFF987
-:10F650008FBF00103C0880088CA700088D060004AE
-:10F6600014E6FFF524020001240400382405008D6F
-:10F670000E001447240600128FBF00102402000160
-:10F6800003E0000827BD0018240A0012156AFFE9EC
-:10F690008FBF0010010020210A00148927BD001827
-:10F6A000000020210A000CB827BD00183C05080006
-:10F6B00024A555983C040800248473583C02080093
-:10F6C000244255A0240300063C010800AC257AC85A
-:10F6D0003C010800AC247ACC3C010800AC227AD072
-:10F6E0003C010800A0237AD403E0000800000000D9
-:10F6F00003E00008240200013C028000308800FF83
-:10F70000344701803C0680008CC301B80460FFFED2
-:10F71000000000008CC501282418FF803C0D800AE1
-:10F7200024AF010001F8702431EC007FACCE00243E
-:10F73000018D2021ACE50000948B00DA35096000D2
-:10F7400024080002316AFFFFACEA00042402000131
-:10F75000A4E90008A0E8000BACE000243C0710007E
-:10F76000ACC701B8AF84002403E00008AF850054A3
-:10F770008C9900048F8D00242409FFBF0325C0232A
-:10F78000AC98000491AF00C42403FFEF31EE007F7A
-:10F79000A1AE00C48C8C0020938B00308F86002497
-:10F7A000358A0002AF8B0048A7800044AC8A002055
-:10F7B000A4C000AC90C800C401093824A0C700C48C
-:10F7C0008F840024AC8000DC908500C400A310244A
-:10F7D00003E00008A08200C43C02800034450180A0
-:10F7E0003C0480008C8301B80460FFFE8F890054C4
-:10F7F0002407608324060002ACA900008C88012441
-:10F80000ACA80004A4A70008A0A6000B3C051000AB
-:10F8100003E00008AC8501B8938800308F89004868
-:10F820008F82002430C600FF0109382330E900FF31
-:10F830000122182130A500FF2468007810C00002C2
-:10F84000012438210080382130E4000314800003B3
-:10F8500030AA00031140000D312B000310A0000955
-:10F860000000102190ED0000244E000131C200FF85
-:10F870000045602BA10D000024E700011580FFF971
-:10F880002508000103E00008000000001560FFF3F8
-:10F890000000000010A0FFFB000010218CF8000009
-:10F8A00024590004332200FF0045782BAD180000D6
-:10F8B00024E7000415E0FFF92508000403E0000830
-:10F8C0000000000093850030938800408F87004837
-:10F8D000000432003103007F00E5102B30C47F00AC
-:10F8E0001040000F006428258F8400243C0980000C
-:10F8F0008C8A00DCAD2A00A43C03800000A35825BC
-:10F90000AC6B00A08C6C00A00580FFFE0000000026
-:10F910008C6D00ACAC8D00DC03E000088C6200A8AC
-:10F920000A0015E88F840024938800413C0280007F
-:10F9300000805021310300FEA383004130ABFFFF64
-:10F9400030CC00FF30E7FFFF344801803C098000E5
-:10F950008D2401B80480FFFE8F8D005424180016FA
-:10F96000AD0D00008D2201248F8D0024AD02000416
-:10F970008D590020A5070008240201B4A119000A2E
-:10F98000A118000B952F01208D4E00088D47000413
-:10F99000978300448D59002401CF302100C72821CE
-:10F9A00000A320232418FFFFA504000CA50B000EC4
-:10F9B000A5020010A50C0012AD190018AD18002406
-:10F9C00095AF00D83C0B10002407FFF731EEFFFF86
-:10F9D000AD0E00288DAC0074AD0C002CAD2B01B821
-:10F9E0008D46002000C7282403E00008AD45002014
-:10F9F0008F8800240080582130E7FFFF910900C65E
-:10FA00003C02800030A5FFFF312400FF00041A00F3
-:10FA10000067502530C600FF344701803C09800054
-:10FA20008D2C01B80580FFFE8F820054240F001733
-:10FA3000ACE200008D390124ACF900048D7800207F
-:10FA4000A4EA0008241901B4A0F8000AA0EF000BF2
-:10FA5000952301208D6E00088D6D0004978400446D
-:10FA600001C35021014D602101841023A4E2000C48
-:10FA7000A4E5000EA4F90010A4E60012ACE0001406
-:10FA80008D780024240DFFFFACF800188D0F006C5A
-:10FA9000ACEF001C8D0E00683C0F1000ACEE002097
-:10FAA000ACED0024950A00AE240DFFF73146FFFFB0
-:10FAB000ACE60028950C00709504007231837FFF3E
-:10FAC0000003CA003082FFFF0322C021ACF8002CE3
-:10FAD000AD2F01B8950E00728D6A002000AE302166
-:10FAE000014D2824A506007203E00008AD65002042
-:10FAF0003C028000344601803C0580008CA301B8A4
-:10FB00000460FFFE24090018ACC40000A0C9000B6B
-:10FB10008F8800243C041000950700AEA4C7001095
-:10FB2000ACC0003003E00008ACA401B83C02800087
-:10FB3000344501803C0480008C8301B80460FFFEE2
-:10FB40008F8A002C240600199549001C3128FFFFDC
-:10FB5000000839C0ACA70000A0A6000B3C051000AF
-:10FB600003E00008AC8501B88F8700340080402195
-:10FB700030C400FF3C0680008CC201B80440FFFE88
-:10FB80008F8900549383005034996000ACA9000021
-:10FB9000A0A300058CE20010240F00022403FFF74D
-:10FBA000A4A20006A4B900088D180020A0B8000A7D
-:10FBB000A0AF000B8CEE0000ACAE00108CED00048A
-:10FBC000ACAD00148CEC001CACAC00248CEB002021
-:10FBD000ACAB00288CEA002C3C071000ACAA002C2F
-:10FBE0008D090024ACA90018ACC701B88D05002010
-:10FBF00000A3202403E00008AD04002093850050FA
-:10FC00002403000127BDFFE800A330042CA200203C
-:10FC1000AFB00010AFBF001400C018211040001397
-:10FC20002410FFFE3C0708008CE7319000E610240A
-:10FC30003C0880003505018014400005240600843E
-:10FC40008F890024240A00042410FFFFA12A00EC5D
-:10FC50000E00168400000000020010218FBF001467
-:10FC60008FB0001003E0000827BD00183C06080014
-:10FC70008CC631940A0016B600C310248F87002C5E
-:10FC800027BDFFE0AFB20018AFB10014AFB0001055
-:10FC9000AFBF001C30D000FF90E6000D00A088210F
-:10FCA0000080902130C5007FA0E5000D8F850024E5
-:10FCB0008E2300188CA200C01062002E240A000EB1
-:10FCC0000E0016A9A38A00502409FFFF1049002244
-:10FCD0002404FFFF52000020000020218E26000097
-:10FCE0003C0C001000CC5824156000393C0E000874
-:10FCF00000CE682455A0003F024020213C1800029D
-:10FD000000D880241200001F3C0A00048F87002CBA
-:10FD10008CE200148CE300108CE500140043F823FF
-:10FD200003E5C82B13200005024020218E24002C5F
-:10FD30008CF10010109100310240202124020012A9
-:10FD4000A38200500E0016A92412FFFF10520002D9
-:10FD50002404FFFF000020218FBF001C8FB2001879
-:10FD60008FB100148FB000100080102103E0000854
-:10FD700027BD002090A800C4350400200A0016DF2B
-:10FD8000A0A400C400CA48241520000B8F8B002CAF
-:10FD90008F8D002C8DAC00101580000B02402021AF
-:10FDA0008E2E002C51C0FFEC0000202102402021AB
-:10FDB0000A0016FA240200178D66001050C0FFE6F4
-:10FDC00000002021024020210A0016FA240200111E
-:10FDD00002402021240200150E0016A9A382005023
-:10FDE000240FFFFF104FFFDC2404FFFF0A0016E979
-:10FDF0008E2600000A001720240200143C0800048C
-:10FE000000C8382450E0FFD4000020210240202107
-:10FE10000A0016FA240200138F86002427BDFFE093
-:10FE2000AFB10014AFBF0018AFB0001090C300C452
-:10FE300030A500FF306200201040000800808821BB
-:10FE40008CCB00C02409FFDF256A0001ACCA00C0CA
-:10FE500090C800C401093824A0C700C414A0004001
-:10FE60003C0C80008F840024908700C42418FFBFBE
-:10FE70002406FFEF30E3007FA08300C4979F004477
-:10FE80008F8200488F8D002403E2C823A799004485
-:10FE9000A5A000AC91AF00C401F87024A1AE00C4CD
-:10FEA0008F8C0024A18000C78F8A0024A540007297
-:10FEB000AD4000DC914500C400A65824A14B00C40D
-:10FEC0008F9000208F8400489786004402042821E8
-:10FED00010C0000FAF850020A38000403C078000C9
-:10FEE0008E2C000894ED01208E2B0004018D5021F2
-:10FEF000014B8021020620233086FFFF30C8000F0F
-:10FF0000390900013131000116200009A3880040A1
-:10FF1000938600308FBF00188FB100148FB000108F
-:10FF200027BD0020AF85004C03E00008AF860048E5
-:10FF300000C870238FBF0018938600308FB1001463
-:10FF40008FB0001034EF0C00010F282127BD0020D6
-:10FF5000ACEE0084AF85004C03E00008AF8600489B
-:10FF600035900180020028210E00168424060082AC
-:10FF70008F840024908600C430C5004050A0FFBA92
-:10FF8000A38000508F8500343C0680008CCD01B8E2
-:10FF900005A0FFFE8F890054240860822407000218
-:10FFA000AE090000A6080008A207000B8CA30008F9
-:10FFB0003C0E1000AE0300108CA2000CAE02001428
-:10FFC0008CBF0014AE1F00188CB90018AE190024A5
-:10FFD0008CB80024AE1800288CAF0028AE0F002C7F
-:10FFE000ACCE01B80A001744A38000508F8A0024C9
-:10FFF00027BDFFE0AFB10014AFB000108F880048FC
-:020000040001F9
-:10000000AFBF001893890028954200AC30D100FFA3
-:100010000109182B0080802130AC00FF3047FFFF22
-:100020000000582114600003310600FF0120302138
-:1000300001095823978300440068202B1480001B7B
-:100040000000000010680043240A0001118A0048E3
-:1000500034E708803165FFFF0E00162602002021DC
-:100060000E0016668F8400548F840024948D0070D7
-:1000700025AC0001A48C0070948B00703C06080035
-:100080008CC6318831677FFF10E6004F000000000A
-:1000900002002021022028218FBF00188FB10014F8
-:1000A0008FB000100A00173027BD0020914400C413
-:1000B0002406FF8000868825A15100C4978400444F
-:1000C0003088FFFF1100001C938900288F8E0024C8
-:1000D0002419EFFF008BF82395D800AC0168682B3A
-:1000E00033E900FF03197824A5CF00AC51A0002A02
-:1000F000010058218E0500202408FFFB2403000185
-:1001000000A81024AE0200201183002534E78000EF
-:10011000020020213165FFFF0E001626012030214C
-:10012000978B00448F870048A780004400EB802312
-:10013000AF900048938900288F8C00248FBF00184F
-:100140008FB100148FB0001027BD002003E000081D
-:10015000A18900C78E0800202409FFFB34E7800036
-:1001600001092824AE050020158AFFBA34E708806B
-:10017000020020210E0015F43165FFFF020020214E
-:10018000022028218FBF00188FB100148FB00010FB
-:100190000A00173027BD00200A0017E70000482199
-:1001A000020020213165FFFF0E0015F401203021EF
-:1001B000978B00448F870048A780004400EB802382
-:1001C0000A0017F7AF90004894890070240A800055
-:1001D000012A4024A48800709085007090990070D6
-:1001E00030A200FF000219C20003F827001FC1C09F
-:1001F000332F007F01F87025A08E00700A0017CF02
-:10020000020020218F88002424030001910A007835
-:10021000910500C7250900783147003F24E6FFE03B
-:1002200000C318042CC2002030670019A3850028E1
-:100230001040001AAF8900343C0A8000354B0002A0
-:10024000240500012406000114E00016006B1024B0
-:10025000000028211440000F306300201060000FC0
-:10026000240500018D0600748D1900742403FF809D
-:1002700000C31024000279403338007F01F868255C
-:100280003C0E100001AE6025AD4C083091280001F5
-:10029000310600010A0017A50000000003E0000875
-:1002A000000000008D0F00748D0D00742418FF8075
-:1002B00001F87024000E414031AC007F010C502544
-:1002C0003C0B1000014B38253C0980000A0017A5A3
-:1002D000AD27083027BDFFD8AFB000108F90003495
-:1002E000AFB40020AFB10014AFBF0024AFB3001C07
-:1002F000AFB200188E0500103C0208008C4231B0ED
-:100300008F86003830A73FFF00E2182B8CD20014F4
-:10031000008088218CD30020106000070000A021FD
-:1003200090CB000D240AFF80014B4824312800FFA8
-:100330001500000C00056382022020212411000D0D
-:10034000A39100508FBF00248FB400208FB3001CF6
-:100350008FB200188FB100148FB000100A0016A9D8
-:1003600027BD00283185000354A0FFF4022020217E
-:1003700094CF001C8F8E00248E070028A5CF00D8B4
-:100380008CCD0010024D302310E6005C2402001FCB
-:100390000E0016A9A3820050241FFFFF105F004E1D
-:1003A0002404FFFF8F83003C8F88002C0263982178
-:1003B0008D090010012310238F83001CAD02001053
-:1003C000AD1300208C67007400F3202B14800062B2
-:1003D000022020218F8600388E0C00248CC500243A
-:1003E0001185000702202021240E001C0E0016A9F2
-:1003F000A38E0050240DFFFF104D00372404FFFF93
-:100400008F84002C8C980024270F0001AC8F0024CF
-:10041000127200448F99001C8F32007412530041F5
-:100420003C0A00808E090000012A10241440003A82
-:10043000000000008E0400142412FFFF109200063A
-:10044000240B001B022020210E0016A9A38B0050B4
-:10045000105200212404FFFF8E0300003C0C000119
-:10046000006C282410A000133C0600800066A02425
-:10047000168000090200282102202021240E001AE3
-:100480000E0016A9A38E0050240DFFFF104D001280
-:100490002404FFFF02002821022020210E0016C99B
-:1004A000240600012410FFFF2404FFFF1050000A5F
-:1004B000241400018F8F002C022020210280302183
-:1004C00095F2003424050001265800010E0017A5FE
-:1004D000A5F80034000020218FBF00248FB4002035
-:1004E0008FB3001C8FB200188FB100148FB00010B2
-:1004F0000080102103E0000827BD00288F83003C06
-:1005000000E3C8210259C02B1300FFA88F88002CDC
-:100510000A00188E24020018AC8000200A0018B8C7
-:100520008E0400148E1F00003C07008003E798240F
-:100530001660FFF92408001A022020210E0016A9D7
-:10054000A38800502403FFFF1443FFBA2404FFFFD5
-:100550000A0018E18FBF0024240B001D0E0016A90D
-:10056000A38B0050240AFFFF144AFF9A2404FFFFC4
-:100570000A0018E18FBF00248F85002427BDFFD813
-:10058000AFB3001CAFB20018AFB10014AFB0001091
-:10059000AFBF002090A700C48F9000342412FFFF4B
-:1005A00034E2004092060000A0A200C48E030010B6
-:1005B000008098211072000630D1003F2408000D01
-:1005C0000E0016A9A3880050105200262406FFFF33
-:1005D0008F8A00248E0900188D4400C01124000762
-:1005E000240C000E026020210E0016A9A38C0050DE
-:1005F000240BFFFF104B001B2406FFFF24040020E8
-:10060000122400048F8D002491AF00C435EE002029
-:10061000A1AE00C48F85003C10A0001A00000000AD
-:100620001224004B8F9800248F92FED42406FFFDE5
-:10063000971000709651000A1230000B8FBF0020F7
-:100640003C1F08008FFF318C03E5C82B1720001ECC
-:1006500002602021000028210E0017A524060001B9
-:10066000000030218FBF00208FB3001C8FB2001814
-:100670008FB100148FB0001000C0102103E00008FB
-:1006800027BD00285224002A8E0300148F840024E2
-:100690009489007025280001A48800709487007058
-:1006A0003C0508008CA5318830E27FFF1045000E24
-:1006B00000000000026020210E0017302405000118
-:1006C0000A001943000030212402002DA3820050AB
-:1006D0000E0016A92413FFFF1453FFE12406FFFFA9
-:1006E0000A0019448FBF00209498007024198000DC
-:1006F0002405000103199024A492007090910070C9
-:10070000908D0070323000FF001079C2000F70270A
-:10071000000E61C031AB007F016C5025A08A0070D3
-:100720000E001730026020210A001943000030211A
-:100730002406FFFF1466FFD68F8400240260202168
-:100740000E001730240500010A0019430000302173
-:10075000026020210A00195D2402000A8F8800240B
-:1007600027BDFFE8AFB00010AFBF0014910A00C46E
-:100770008F87003400808021354900408CE60010CE
-:10078000A10900C43C0208008C4231B030C53FFFD3
-:1007900000A2182B106000078F850038240DFF8001
-:1007A00090AE000D01AE6024318B00FF1560000893
-:1007B0000006C382020020212403000D8FBF001415
-:1007C0008FB0001027BD00180A0016A9A38300509F
-:1007D00033060003240F000254CFFFF7020020214C
-:1007E00094A2001C8F85002424190023A4A200D801
-:1007F0008CE8000000081E02307F003F13F900352E
-:100800003C0A00838CE800188CA600C01106000882
-:10081000000000002405000E0E0016A9A38500505C
-:100820002407FFFF104700182404FFFF8F850024D2
-:1008300090A900C435240020A0A400C48F8C002CF3
-:10084000918E000D31CD007FA18D000D8F83003C76
-:100850001060001C020020218F8400388C9800104A
-:100860000303782B11E0000D241900180200202149
-:10087000A39900500E0016A92410FFFF105000028B
-:100880002404FFFF000020218FBF00148FB0001050
-:100890000080102103E0000827BD00188C8600109E
-:1008A0008F9F002C0200202100C31023AFE2001014
-:1008B000240500010E0017A5240600010A0019CC2A
-:1008C000000020210E001730240500010A0019CC79
-:1008D00000002021010A5824156AFFD98F8C002CB2
-:1008E000A0A600EC0A0019B9A386004227BDFFD8D4
-:1008F000AFB000108F900034AFB20018AFBF00202F
-:10090000AFB3001CAFB100148E1100103C030800FF
-:100910008C6331B032253FFF00A3102B104000083C
-:10092000008090218F8600382409FF8090CA000D36
-:10093000012A4024310700FF14E0000B00116B82F4
-:10094000024020212412000DA39200508FBF0020EE
-:100950008FB3001C8FB200188FB100148FB000103D
-:100960000A0016A927BD002831AC0003240B0001A2
-:10097000558BFFF40240202190CF000D31EE00088E
-:1009800011C000608F93003C16600009240200270C
-:100990008E19000C8CD80020173800052402002086
-:1009A0008E0200088CDF0024105F0040240200202B
-:1009B0000E0016A9A38200502406FFFF1046003344
-:1009C0002404FFFF8F99002C240AFFF73C13800EAC
-:1009D0009329000D2404FF803C0D8000012AF82497
-:1009E000A33F000D8F99001C3C0808008D0831AC16
-:1009F0008F830054972700788F9F002C01031021CC
-:100A000030E57FFF000530400046782131F8007F57
-:100A10000313602101E47024ADAE002CA591000009
-:100A20008FEB0028256A0001AFEA00288FE3002C35
-:100A30008E09002C00694021AFE8002C8E07002CA5
-:100A4000AFE700308E050014AFE5003497E6003ABA
-:100A500024C20001A7E2003A973300783C10080056
-:100A60008E1031B02663000130717FFF12300027F5
-:100A7000006030218F8F001C0240202124050001DE
-:100A80000E001730A5E60078000020218FBF00205F
-:100A90008FB3001C8FB200188FB100148FB00010FC
-:100AA0000080102103E0000827BD00288E050014F7
-:100AB0002413FFFF10B3001D8F8300248E0800183D
-:100AC0008C6700C0150700092402000E8E0A00245E
-:100AD0008CC9002815490005240200218E07002832
-:100AE0008CCB002C10EB00132402001F0E0016A963
-:100AF000A38200501453FFB32404FFFF0A001A4ED0
-:100B00008FBF00200A001A1624020024240E800041
-:100B1000006E682431ACFFFF000C5BC2317100FF36
-:100B2000001180270A001A47001033C00A001A6516
-:100B3000240200258E05002C10A0FFEC24020023C7
-:100B40008F8E001C8DCD007401A5602B1580FFE7F2
-:100B5000240200268CCF001400A7C02101F8202B0E
-:100B60001080FF998F99002C024020210A001A65FD
-:100B70002402002227BDFFE0AFB000108F900034A8
-:100B8000AFB10014AFBF00188E0500103C03080081
-:100B90008C6331B00080882130A43FFF0083102B8C
-:100BA000104000078F8600382409FF8090CA000D8E
-:100BB000012A4024310700FF14E000098F8B003C1C
-:100BC0002410000D02202021A39000508FBF001898
-:100BD0008FB100148FB000100A0016A927BD0020A5
-:100BE000116000080005C3828F8F00248F8EFED411
-:100BF0002407FFFD95EC007095CD000A11AC00387C
-:100C00008FBF00183305000314A00010000000007F
-:100C10009219000213200041000000008E060024FB
-:100C200050C0000F92040003022020212402000F74
-:100C30000E0016A9A38200502408FFFF14480007E5
-:100C40002407FFFF0A001AE28FBF001890C3000DAF
-:100C50003064000810800037022020219204000335
-:100C600024070002308900FF15270005308F00FFA0
-:100C70008F8A003C11400031240C002C308F00FF83
-:100C800039E500102CAD00012DEE000102002821F5
-:100C900001CD30250E0016C9022020212410FFFFAF
-:100CA0001050000E2407FFFF8F83003C10600017D8
-:100CB000022020213C1908008F39318C0323C02BDE
-:100CC0005700000C2411002D0220202100002821B3
-:100CD0000E0017A524060001000038218FBF001860
-:100CE0008FB100148FB0001000E0102103E0000865
-:100CF00027BD00200E0016A9A39100501450FFF646
-:100D00002407FFFF0A001AE28FBF00180E001730F9
-:100D1000240500010A001AE1000038218CDF0024BC
-:100D20008E020024545FFFC1022020210A001AC253
-:100D3000920400030A001AB62402001002202021A7
-:100D40000E0016A9A38C0050240BFFFF104BFFE3ED
-:100D50002407FFFF0A001AC99204000330A500FF10
-:100D60002406000124A9000100C9102B1040000C2A
-:100D700000004021240A000100A61823308B000146
-:100D800024C60001006A38040004204211600002F9
-:100D900000C9182B010740251460FFF800A618238E
-:100DA00003E000080100102127BDFFD8AFB00018F4
-:100DB0008F900034AFB1001CAFBF00202403FFFFB1
-:100DC0002411002FAFA30010920600002405000894
-:100DD00026100001006620260E001B01308400FF53
-:100DE00000021E003C021EDC34466F410A001B2933
-:100DF0000000102110A000090080182124450001E6
-:100E000030A2FFFF2C4500080461FFFA00032040D8
-:100E10000086202614A0FFF9008018210E001B0177
-:100E2000240500208FA300102629FFFF313100FF89
-:100E300000034202240700FF1627FFE201021826E2
-:100E400000035027AFAA0014AFAA00100000302101
-:100E500027A8001027A7001400E6782391ED0003CF
-:100E600024CE000100C8602131C600FF2CCB000455
-:100E70001560FFF9A18D00008FA200108FBF002028
-:100E80008FB1001C8FB0001803E0000827BD0028B8
-:100E90009383003027BDFFE024020034AFB100147B
-:100EA000AFB00010AFBF001CAFB2001800808821A7
-:100EB0001062006200A080219204000414800045AA
-:100EC0008F880024A38000288E0500048D0600C8AA
-:100ED0003C0700FF34E3FFFF00A3282400C5102BCC
-:100EE0001440004DAF85003C978A00448F8700482E
-:100EF0000147102310A00032A78200448F98001CE5
-:100F0000304CFFFF9312007C0012788231F1000117
-:100F10000011708001C56821018D582B116000619E
-:100F20008F8600248F8900208F84004C1089005EFA
-:100F30003C023F018E1F00003C10250003E2C82444
-:100F40001730007A8F8400348F8700348F86002416
-:100F50008CE30000ACC300788CE50010ACC50088C1
-:100F60008F8700488F85003C938D002830AE0003AA
-:100F7000000E4023310A0003014D4021A3880028C0
-:100F800094CB00AC01276021AF8C002035691000A4
-:100F9000A4C900AC1620005101452021AF840048AF
-:100FA000000020218FBF001C8FB200188FB10014E9
-:100FB0008FB000100080102103E0000827BD002042
-:100FC0008F840020AF800048008730210A001B92E8
-:100FD000AF860020241F000CA39F00500E0016A90E
-:100FE000022020212419FFFF1059FFEE2404FFFFE7
-:100FF0008F880024A38000288E0500048D0600C879
-:101000003C0700FF34E3FFFF00A3282400C5102B9A
-:101010001040FFB5AF85003C0220202124090019B3
-:10102000A38900500E0016A92411FFFF1051FFDD07
-:101030002404FFFF0A001B648F85003C8F8400247A
-:101040008F8700348CF20030908600C430C50010C9
-:1010500014A000108F8300482C680005150000289C
-:1010600000000000908A00C4246BFFFC314900108E
-:1010700015200008316400FF8F8D004C8F8C0020FC
-:1010800011AC0004388F000131EE000115C0002FB3
-:10109000000000000E001B14000000000A001BEB03
-:1010A000000000008F890020938D002830AE0003DF
-:1010B000000E4023310A0003014D4021A38800287F
-:1010C00094CB00AC01276021AF8C00203569100063
-:1010D000A4C900AC1220FFB101452021251800044D
-:1010E000A398002894CF00AC24920004AF9200484B
-:1010F00035F12000A4D100AC0A001B930000202190
-:101100008C8200DC1242FF6C022020212418000592
-:10111000A39800500E0016A92412FFFF1452FF6678
-:101120002404FFFF0A001B948FBF001C30E500FF62
-:101130000E0015B0000030218F8600248F870048F4
-:101140008F8900200A001B848F85003C0E0015DB70
-:10115000000000000A001BEB000000009383004227
-:1011600027BDFFE024020002AFB20018AFB10014A7
-:10117000AFBF001C00808821AFB00010000090219C
-:10118000106200552404FFFD978300448F850048BA
-:101190003066FFFF00C5202B1480005B9387003072
-:1011A0003C0880009504012010E500528F8A002041
-:1011B0008F84004C30A500FF0E0015B024060001FE
-:1011C0008F9F00543C0580003C19408027ED01783A
-:1011D00031B00078240EFF800219582534AF090081
-:1011E00031B8000701AE6024ACAC0800030F8021C9
-:1011F000ACAB081002202021020028210E001B4E5B
-:10120000AF9000342403FFFF104300332404FFFF9A
-:101210008E0C00103C0708008CE731B092060000ED
-:1012200031843FFF0087102B1040002330CD003F5A
-:101230008F980054000471803C0408008C8431A80D
-:101240002409FF809390004100984021010E202145
-:1012500000897024000E51403C0980003099007FC5
-:101260003C0F00808F8800243525094035E20001BD
-:1012700001593825308B0078308600073C03100078
-:101280003C1F800C00C5C0210162582500E3502599
-:10129000033F782136050001AD2E0804AF980038D1
-:1012A000AD2B0814AF8F002CAD2E0028AD040074B8
-:1012B000AD2A0830A3850041938300422410000327
-:1012C0005070002725A3FFE0240C0001106C001CC7
-:1012D00024060023024020218FBF001C8FB200187B
-:1012E0008FB100148FB000100080102103E00008BF
-:1012F00027BD0020314900035520FFAE8F84004CEC
-:101300000A001C278F90004C8F84004C306500FF32
-:101310000E0015B024060001938B00302405003424
-:1013200011650018978300448F8500483062FFFFE5
-:1013300000A25823AF8B00480A001C5FA78000441E
-:1013400011A6003700000000022020212411000B0C
-:101350000E0016A9A39100500A001C5F00409021C6
-:101360002C7200201240FFF80003F8803C070800B0
-:1013700024E7796003E7C8218F2D000001A0000851
-:10138000000000008F8500482CA200055440001D7D
-:10139000A7800044978A00443148FFFF00A84823F3
-:1013A0002D2F000511E00003314400FF24AEFFFCA7
-:1013B00031C400FF8F90004C8F9800201218000459
-:1013C00038990001332D000115A00029000000000C
-:1013D0008F910024922500C434A30010A22300C4DE
-:1013E000978300448F8500488F8400243062FFFF7C
-:1013F00000A25823AC8000DCA78000440A001C5FD8
-:10140000AF8B00483062FFFF00A258230A001C5F28
-:10141000AF8B00482403FFFF11830005000000008C
-:101420000E001981022020210A001C5F004090213B
-:101430000E001908022020210A001C5F00409021A4
-:101440000E0019E5022020210A001C5F00409021B7
-:101450000E00185F022020210A001C5F004090212E
-:101460000E001A87022020210A001C5F00409021F4
-:101470000E0015DB00000000978300448F850048B4
-:10148000306CFFFF00AC38232CFF000553E0FFA8B1
-:101490003062FFFF8F860024A7800044ACC200DCCE
-:1014A0003062FFFF00A258230A001C5FAF8B004888
-:1014B00027BDFFD0AFB20018AFB00010AFBF0028FB
-:1014C000AFB50024AFB40020AFB3001CAFB100141F
-:1014D0003C0C80008D880128240FFF803C07800A87
-:1014E00025100100250B0080020F68243205007FC3
-:1014F000016F7024AD8E009000A72821AD8D0024CF
-:1015000090A700EC3169007F3C0A8004012A182171
-:10151000A38700429066007C00809021AF83001C6E
-:1015200030C20002AF880054AF85002400A018210B
-:10153000144000022404003424040030A38400304A
-:101540008C6600CC30F100FF24040004AF86004814
-:1015500012240004A38000508E5300041660001D66
-:101560003C0880009387004130F200011240000FD8
-:101570008FBF00288CB800748CA400742419FF80DD
-:101580000319882400117140308F007F01CF60253E
-:101590003C0D2000018D582530F500FE3C0A8000EE
-:1015A000AD4B0830A39500418FBF00288FB50024B4
-:1015B0008FB400208FB3001C8FB200188FB10014BD
-:1015C0008FB000102402000127BD003003E00008A6
-:1015D000ACA600CC8E590008951F01208E46001045
-:1015E000033FC0213307FFFF30F5000F32B4000185
-:1015F000AF8600201680003BA395004035060C0006
-:1016000002A6102100F51823AD030084AF82004C20
-:101610008E4900043128FFFF1100002BA7890044E8
-:101620002410FF803C1580003C1420000A001D4D52
-:101630002413FFFE90AE00C4020E682431AC00FFFC
-:101640001580002A0240202193840041978600449F
-:10165000308F000111E0000B026428248F890024E0
-:101660008D2300748D280074A38500410070102420
-:101670000002C940311F007F033FC02503148825A5
-:10168000AEB1083010C000108F85002490A700C4B0
-:1016900002075824316A00FF1540FFE6024020216E
-:1016A0000E001C01979100441040FFE89384004114
-:1016B0002405FFFD544500058E430020022028210B
-:1016C0000E001586024020218E4300203070000459
-:1016D0001600000A2414FFFB8F8500240A001D0356
-:1016E0008F8600480A001D2EAF86004C0E00182B76
-:1016F000000000000A001D3D9384004100749824FE
-:101700000E0015A0AE5300208F8500240A001D0393
-:101710008F86004827BDFFD8AFB3001CAFB10014BF
-:10172000AFBF0020AFB20018AFB000103C02800085
-:101730008C5201408C4B01483C048000000B8C0211
-:10174000322300FF317300FF8C8501B804A0FFFE37
-:1017500034900180AE1200008C8701442464FFF0B5
-:10176000240600022C830013AE070004A611000813
-:10177000A206000BAE1300241060004F8FBF0020A4
-:10178000000448803C0A0800254A79E0012A4021EB
-:101790008D04000000800008000000003C100800DC
-:1017A0008E1031A831733FFF001389800212282167
-:1017B000240CFF8000B12021264D01002647008027
-:1017C0003C0F80003C03800431A8007F30E9007F9B
-:1017D000308A007F3C0E800A3C02800C008CC024C2
-:1017E00001AC302400ECC82401239821014280215F
-:1017F000ADE60024010EF821ADF90090ADF8002807
-:10180000AF90002CAF9F0024AF93001C0E00167504
-:10181000016080213C0380008C6B01B80560FFFEF5
-:101820008F87002C8F8600243465018090F9000D8D
-:10183000ACB2000024C200780019C60000187E0374
-:10184000000F9027001227C2A4B00006108000707D
-:10185000240E6082A4AE0008A0A00005240F0002A0
-:10186000A0AF000B0004C4008F8B001C3C192700A4
-:1018700003199025ACB20010ACA00014ACA0002459
-:10188000ACA00028ACA0002C8D7300382411FF8080
-:10189000ACB3001890F0000D0230282430A400FFF3
-:1018A000108000058FBF002090EC000D319F007F5D
-:1018B000A0FF000D8FBF00208FB3001C8FB2001857
-:1018C0008FB100148FB000103C0A10003C0D800056
-:1018D00027BD002803E00008ADAA01B8265F01007B
-:1018E0002405FF8033F8007F3C06800003E5782460
-:1018F0003C19800A03192021ACCF0024908E00C42B
-:1019000000AE682431AC00FF1180FFEAAF840024F0
-:10191000248E007895CD00123C0C08008D8C31A8E7
-:101920003C03800C31AB3FFF01924821000B5180FA
-:10193000012A40213104007F010510240083382151
-:10194000ACC200280E001675AF87002C3C03800047
-:101950008C6501B804A0FFFE00000000AE1200007C
-:101960008C720144AE120004A6110008241100027A
-:10197000A211000BAE1300240A001DD88FBF002057
-:101980003C1260008E452C083C03F0033462FFFFDC
-:1019900000A2F824AE5F2C088E582C083C1901B028
-:1019A00003199825AE532C080A001DD88FBF0020BC
-:1019B000264D010031AF007F3C10800A240EFF80CD
-:1019C00001F0282101AE60243C0B8000AD6C0024A6
-:1019D0001660FFB8AF85002424110003A0B100EC0D
-:1019E0000A001DD88FBF002026480100310A007F61
-:1019F0003C0B800A2409FF80014B3021010920247F
-:101A00003C078000ACE400240A001DD7AF86002408
-:101A1000944D0012321F3FFF31AC3FFF159FFF8DE9
-:101A2000240E608290C300C42409FF800123102487
-:101A3000304A00FF1140FF87000000002407000427
-:101A4000A0C700EC8F87002C240860842406000DBA
-:101A5000A4A80008A0A600050A001DC2240F0002C9
-:101A60005F865437E4AC62CC50103A453662198533
-:101A7000BF14C0E81BC27A1E84F4B556094EA6FEF8
-:101A80007DDA01E7C04D7481800801008008008084
-:101A90008008000008004FBC08004FBC08005098A8
-:101AA0000800506C0800505008004F8C08004F8C04
-:101AB00008004F8C08004FC4080072BC080073086F
-:101AC000080072C8080071F0080072C8080072F8B7
-:101AD000080072C8080071F0080071F0080071F089
-:101AE000080071F0080071F0080071F0080071F052
-:101AF000080071F0080071F0080071F0080072E849
-:101B0000080072D8080071F0080071F0080071F048
-:101B1000080071F0080071F0080071F0080071F021
-:101B2000080071F0080071F0080071F0080071F011
-:101B3000080071F0080072D8080078900800775CFF
-:101B4000080078580800775C080078280800764478
-:101B50000800775C0800775C0800775C0800775C19
-:101B60000800775C0800775C0800775C0800775C09
-:101B70000800775C0800775C0800775C0800775CF9
-:041B8000080077845E
-:0C1B84000A000122000000000000000028
-:101B90000000000D747061342E362E3135000000C7
-:101BA00004060F010000000000000000000000001B
-:101BB0000000000000000000000000000000000025
-:101BC0000000000000000000000000000000000015
-:101BD0000000000000000000000000000000000005
-:101BE00000000000000000000000000000000000F5
-:101BF00000000000000000000000000000000000E5
-:101C000000000000000000000000000000000000D4
-:101C100010000003000000000000000D0000000D97
-:101C20003C020800244217C03C03080024632AB485
-:101C3000AC4000000043202B1480FFFD2442000430
-:101C40003C1D080037BD2FFC03A0F0213C1008000C
-:101C5000261004883C1C0800279C17C00E00025E5A
-:101C6000000000000000000D2402FF8027BDFFE0FF
-:101C700000821024AFB00010AF420020AFBF0018A8
-:101C8000AFB10014936500043084007F0344182131
-:101C90003C0200080062182130A50020036080216A
-:101CA0003C080111277B000814A000022466005C98
-:101CB0002466005892020004974301049204000431
-:101CC0003047000F3063FFFF308400400067282357
-:101CD00010800009000048219202000530420004F3
-:101CE000104000050000000010A0000300000000EC
-:101CF00024A5FFFC240900049202000530420004E0
-:101D0000104000120000000010A0001000000000B1
-:101D10009602000200A72021010440252442FFFE74
-:101D2000A7421016920300042402FF8000431024EF
-:101D3000304200FF104000033C0204000A00017220
-:101D4000010240258CC20000AF4210188F4201787A
-:101D50000440FFFE2402000AA7420140960200024E
-:101D6000240400093042000700021023304200071B
-:101D7000A7420142960200022442FFFEA74201440C
-:101D8000A740014697420104A74201488F4201083B
-:101D9000304200205040000124040001920200045F
-:101DA00030420010144000023483001000801821DB
-:101DB000A743014A000000000000000000000000EE
-:101DC00000000000AF48100000000000000000000C
-:101DD00000000000000000008F4210000441FFFEE0
-:101DE0003102FFFF104000070000000092020004D3
-:101DF0003042004014400003000000008F421018E1
-:101E0000ACC20000960200063042FFFF24420002EE
-:101E10000002104300021040036288219622000055
-:101E20001120000D3044FFFF00A710218F83003CDC
-:101E30008F45101C00021082000210800043102108
-:101E4000AC45000030A6FFFF0E0005B700052C02D0
-:101E500000402021A6220000920300042402FF80FB
-:101E600000431024304200FF1040001F000000001B
-:101E700092020005304200021040001B00000000EA
-:101E80009742100C2442FFFEA742101600000000EB
-:101E90003C02040034420030AF4210000000000059
-:101EA0000000000000000000000000008F42100051
-:101EB0000441FFFE000000009742100C8F45101CEB
-:101EC0003042FFFF244200300002108200021080E6
-:101ED000005B1021AC45000030A6FFFF0E0005B7E7
-:101EE00000052C02A62200009604000224840008AB
-:101EF0000E0001E73084FFFF974401040E0001F556
-:101F00003084FFFF8FBF00188FB100148FB0001016
-:101F10003C02100027BD002003E00008AF4201781A
-:101F20003084FFFF308200078F85002410400002BC
-:101F3000248300073064FFF800A4102130421FFF03
-:101F400003421821247B4000AF850028AF82002483
-:101F500003E00008AF4200843084FFFF3082000FAE
-:101F60008F85002C8F860034104000022483000FE0
-:101F70003064FFF000A410210046182BAF8500301C
-:101F80000046202314600002AF82002CAF84002C96
-:101F90008F82002C34048000034218210064182131
-:101FA000AF83003C03E00008AF4200808F82001442
-:101FB000104000088F8200048F82FFE41440000567
-:101FC0008F8200043C02FFBF3442FFFF00822024C6
-:101FD0008F82000430430006240200021062000FCA
-:101FE0003C0201012C620003504000052402000461
-:101FF0001060000F3C0200010A00022E00000000E9
-:1020000010620005240200061462000C3C0201115B
-:102010000A000227008210253C02001100821025D0
-:10202000AF421000240200010A00022EAF82000C11
-:1020300000821025AF421000AF80000C00000000AD
-:10204000000000000000000003E0000800000000A5
-:102050008F82000C10400004000000008F4210002E
-:102060000441FFFE0000000003E000080000000043
-:102070008F820010000229C224A3FFF0000318423F
-:102080002444F80000031140004310210002108096
-:1020900000431021000210803C0308002463180054
-:1020A0002C84030114800013004330218F84001816
-:1020B00000A4102B1440000F0000302100A41023B6
-:1020C00000021940006218210003188000621821E4
-:1020D0008F82001C008210212442FFFF0045102B3C
-:1020E00014400004000318803C02080024421A1423
-:1020F0000062302103E0000800C0102127BDFFE08E
-:10210000AFBF0018AFB10014AFB000103C046008BE
-:102110008C8250002403FF7F3C06600000431024A3
-:102120003442380CAC8250008CC24C1C3C1A8000EB
-:10213000000216023042000F10400007AF82001C60
-:102140008CC34C1C3C02001F3442FC00006218246B
-:10215000000319C2AF8300188F420008275B4000BC
-:1021600034420001AF420008AF8000243C02601CF2
-:10217000AF400080AF4000848C4500088CC3080845
-:1021800034028000034220212402FFF00062182460
-:102190003C0200803C010800AC2204203C025709AC
-:1021A000AF84003C14620004AF85003424020001B7
-:1021B0000A00028EAF820014AF8000143C0280003F
-:1021C000344400708C8300008F42000038420001CC
-:1021D0003042000110400018AF83003800804021D9
-:1021E000006030218D0700003C0508008CA5045CD0
-:1021F0003C0408008C84045800E6302300001021C1
-:1022000000A6282100A6302B008220210086202154
-:102210003C010800AC25045C3C010800AC240458D7
-:102220008F42000038420001304200011440FFEDAF
-:1022300000E03021AF8700383C028000344200705B
-:102240008C4700008F8600383C0508008CA5045C94
-:102250003C0408008C84045800E638230000102158
-:1022600000A72821008220218F82001400A7302B94
-:10227000008620213C010800AC25045C3C010800DC
-:10228000AC240458104000160000000097420104DE
-:10229000104000058F830000146000072462FFFFD8
-:1022A0000A0002D02C62000A2C6200105040000488
-:1022B0008F83000024620001AF8200008F83000042
-:1022C0002C62000A144000032C6200070A0002D7A7
-:1022D000AF80FFE41040000224020001AF82FFE45F
-:1022E0008F4301088F44010030622000AF83000457
-:1022F00010400008AF8400103C0208008C42042CFF
-:10230000244200013C010800AC22042C0A0005B361
-:102310003C0240003065020014A0000324020F00BC
-:102320001482026024020D0097420104104002C88A
-:102330003C02400030624000144000AD8F82003CFF
-:102340008C4400088F4201780440FFFE24020800FC
-:10235000AF42017824020008A7420140A740014291
-:10236000974201048F8400043051FFFF3082000146
-:1023700010400007022080212623FFFE24020002D5
-:102380003070FFFFA74201460A000304A74301483B
-:10239000A74001463C0208008C42043C1440000D5A
-:1023A0008F830010308200201440000224030009B3
-:1023B00024030001006020218F8300102402090003
-:1023C0005062000134840004A744014A0A00031F3C
-:1023D0000000000024020F0014620005308200207B
-:1023E000144000062403000D0A00031E2403000508
-:1023F000144000022403000924030001A743014AFA
-:102400003C0208008C4204203C0400480E00020AF2
-:10241000004420250E000233000000008F82000CD3
-:102420001040003E000000008F4210003C030020DE
-:1024300000431024104000398F8200043042000213
-:102440001040003600000000974210141440003382
-:1024500000000000974210088F88003C3042FFFFC8
-:1024600024420006000218820003388000E8302170
-:10247000304300018CC400001060000430420003AF
-:102480000000000D0A00036000E810215440001015
-:102490003084FFFF3C05FFFF0085202400851826BF
-:1024A0000003182B0004102B0043102410400005DB
-:1024B00000000000000000000000000D000000000F
-:1024C000240001CB8CC200000A00035F00452025D8
-:1024D0003883FFFF0003182B0004102B0043102447
-:1024E0001040000500000000000000000000000D8A
-:1024F00000000000240001D48CC200003444FFFF1F
-:1025000000E81021AC4400003C0208008C4204307A
-:10251000244200013C010800AC2204308F6200001C
-:102520008F84003CAF8200088C8300003402FFFFE0
-:102530001462000F000010213C0508008CA5045413
-:102540003C0408008C84045000B0282100B0302BDB
-:1025500000822021008620213C010800AC25045483
-:102560003C010800AC2404500A0005A9240400081A
-:102570008C820000304201001040000F000010214A
-:102580003C0508008CA5044C3C0408008C840448DD
-:1025900000B0282100B0302B0082202100862021AD
-:1025A0003C010800AC25044C3C010800AC24044864
-:1025B0000A0005A9240400083C0508008CA5044471
-:1025C0003C0408008C84044000B0282100B0302B6B
-:1025D00000822021008620213C010800AC25044413
-:1025E0003C010800AC2404400A0005A924040008AA
-:1025F0008F6200088F62000000021602304300F074
-:10260000240200301062000524020040106200E045
-:102610008F8200200A0005B12442000114A00005A9
-:1026200000000000000000000000000D000000009D
-:10263000240001FE8F4201780440FFFE00000000EC
-:102640000E00023B00000000144000050040802105
-:10265000000000000000000D000000002400020542
-:102660008E02000010400005000000000000000085
-:102670000000000D00000000240002088F62000C22
-:1026800004430003240200010A000457AE000000C6
-:10269000AE0200008F82003C8C480008A2000007B8
-:1026A0008F65000C8F64000430A3FFFF0004240238
-:1026B00000852023308200FF0043102124420005C2
-:1026C000000230832CC20081A605000A14400005D8
-:1026D000A2040004000000000000000D0000000043
-:1026E000240002208F85003C0E0005D5260400142E
-:1026F0008F6200048F430108A60200083C0210000C
-:1027000000621824106000080000000097420104D5
-:10271000920300072442FFEC346300023045FFFFC0
-:102720000A0003ECA2030007974201042442FFF0D1
-:102730003045FFFF960600082CC2001354400005E8
-:10274000920300079202000734420001A202000730
-:102750009203000724020001106200052402000316
-:102760001062000B8F82003C0A00040930C6FFFF94
-:102770008F82003C3C04FFFF8C43000C0064182453
-:1027800000651825AC43000C0A00040930C6FFFFA1
-:102790003C04FFFF8C4300100064182400651825DA
-:1027A000AC43001030C6FFFF24C2000200021083B9
-:1027B000A20200058F83003C304200FF000210801F
-:1027C000004328218CA800008CA2000024030004F0
-:1027D0000002170214430012000000009742010497
-:1027E0003C03FFFF010318243042FFFF0046102383
-:1027F0002442FFFE00624025ACA8000092030005C1
-:10280000306200FF0002108000501021904200143E
-:102810003042000F004310210A00043EA2020006CD
-:102820008CA40004974201049603000A3088FFFF3D
-:102830003042FFFF004610232442FFD6000214005E
-:1028400001024025ACA80004920200079204000592
-:102850002463002800031883006418213442000414
-:10286000A2030006A20200078F8200042403FFFBDC
-:102870003442000200431024AF8200049203000699
-:102880008F87003C00031880007010218C440020CA
-:102890003C02FFF63442FFFF00824024006718210B
-:1028A000AE04000CAC68000C920500063C03FF7FF0
-:1028B0008E02000C0005288000B020213463FFFF49
-:1028C000010330249488002600A728210043102407
-:1028D000AE02000CAC860020AC880024ACA800102E
-:1028E00024020010A742014024020002A740014236
-:1028F000A7400144A7420146974201043C04000856
-:102900002442FFFEA7420148240200010E00020AF1
-:10291000A742014A9603000A9202000400431021D4
-:102920002442000230420007000210233042000718
-:102930000E000233AE0200108F6200003C0308005C
-:102940008C63044424040010AF8200089742010401
-:102950003042FFFF2442FFFE00403821000237C30F
-:102960003C0208008C420440006718210067282BB5
-:1029700000461021004510213C010800AC2304440E
-:102980003C010800AC2204400A00053E00000000A3
-:1029900014A0000500000000000000000000000D71
-:1029A000000000002400029E8F4201780440FFFED8
-:1029B000000000000E00023B000000001440000573
-:1029C00000408021000000000000000D0000000019
-:1029D000240002A58E020000544000069202000767
-:1029E000000000000000000D00000000240002A80C
-:1029F0009202000730420004104000058F8200045C
-:102A00002403FFFB3442000200431024AF82000481
-:102A10008F6200040443000892020007920200063D
-:102A20008E03000CAE000000000210800050102148
-:102A3000AC430020920200073042000454400009D9
-:102A40009602000A920200053C0300010002108079
-:102A5000005010218C46001800C33021AC460018ED
-:102A60009602000A92060004277100080220202125
-:102A700000C2302124C60005260500140E0005D52D
-:102A800000063082920400068F6500043C027FFF3E
-:102A900000042080009120218C8300043442FFFF39
-:102AA00000A2282400651821AC83000492020007CC
-:102AB0009204000592030004304200041040001408
-:102AC00096070008308400FF000420800091202138
-:102AD0008C860004974201049605000A306300FFCB
-:102AE0003042FFFF004310210045102130E3FFFF7B
-:102AF000004310232442FFD830C6FFFF0002140019
-:102B000000C23025AC8600040A0004F292030007DC
-:102B1000308500FF0005288000B128218CA400002A
-:102B200097420104306300FF3042FFFF0043102151
-:102B3000004710233C03FFFF008320243042FFFFA7
-:102B400000822025ACA400009203000724020001AB
-:102B50001062000600000000240200031062001151
-:102B6000000000000A0005158E03001097420104C2
-:102B7000920300049605000A8E24000C00431021E5
-:102B8000004510212442FFF23C03FFFF0083202474
-:102B90003042FFFF00822025AE24000C0A000515FC
-:102BA0008E03001097420104920300049605000A68
-:102BB0008E24001000431021004510212442FFEE16
-:102BC0003C03FFFF008320243042FFFF00822025CA
-:102BD000AE2400108E0300102402000AA742014018
-:102BE000A74301429603000A920200043C040040FD
-:102BF00000431021A7420144A74001469742010427
-:102C0000A7420148240200010E00020AA742014A1D
-:102C10000E000233000000008F62000092030004E7
-:102C200000002021AF820008974201049606000AA6
-:102C30003042FFFF00621821006028213C03080099
-:102C40008C6304443C0208008C4204400065182157
-:102C5000004410210065382B004710213C0108007A
-:102C6000AC2304443C010800AC220440920400045C
-:102C7000008620212484000A3084FFFF0E0001E733
-:102C800000000000974401043084FFFF0E0001F5AE
-:102C9000000000003C021000AF4201780A0005B0BD
-:102CA0008F820020148200273062000697420104C0
-:102CB000104000673C0240003062400010400005B8
-:102CC00000000000000000000000000D00000000F7
-:102CD000240003968F4201780440FFFE240208007E
-:102CE000AF42017824020008A7420140A7400142F8
-:102CF0008F82000497430104304200011040000716
-:102D00003070FFFF2603FFFE24020002A7420146A7
-:102D1000A74301480A0005682402000DA7400146A8
-:102D20002402000DA742014A8F620000240400081B
-:102D3000AF8200080E0001E7000000000A00054213
-:102D400002002021104000423C024000936200003B
-:102D5000304300F0240200101062000524020070CD
-:102D600010620035000000000A0005B08F820020CC
-:102D70008F620000974301043050FFFF3071FFFF66
-:102D80008F4201780440FFFE320200070002102348
-:102D9000304200072403000A2604FFFEA743014037
-:102DA000A7420142A7440144A7400146A751014858
-:102DB0008F42010830420020144000022403000921
-:102DC00024030001A743014A0E00020A3C0400400C
-:102DD0000E000233000000003C0708008CE70444AA
-:102DE000021110212442FFFE3C0608008CC604405C
-:102DF0000040182100E33821000010218F650000F9
-:102E000000E3402B00C230212604000800C8302116
-:102E10003084FFFFAF8500083C010800AC27044464
-:102E20003C010800AC2604400E0001E70000000051
-:102E30000A000542022020210E0001390000000096
-:102E40008F82002024420001AF8200203C0240001B
-:102E5000AF420138000000000A00028F3C028000EF
-:102E60003084FFFF30C6FFFF00052C0000A6282598
-:102E70003882FFFF004510210045282B0045102116
-:102E800000021C023042FFFF0043102100021C021E
-:102E90003042FFFF004310213842FFFF03E00008EB
-:102EA0003042FFFF3084FFFF30A5FFFF00001821F4
-:102EB0001080000700000000308200011040000276
-:102EC00000042042006518210A0005CB00052840B7
-:102ED00003E000080060102110C0000624C6FFFFB8
-:102EE0008CA2000024A50004AC8200000A0005D5D5
-:102EF0002484000403E000080000000010A0000883
-:102F000024A3FFFFAC8600000000000000000000CA
-:102F10002402FFFF2463FFFF1462FFFA24840004ED
-:082F200003E0000800000000BE
-:042F280000000001A4
-:042F2C000A00002671
-:102F300000000000000000000000000D74787034F4
-:102F40002E362E3136000000040610000000000A64
-:102F5000000001360000EA600000000000000000F0
-:102F60000000000000000000000000000000000061
-:102F70000000000000000000000000000000000051
-:102F80000000000000000000000000000000001D24
-:102F90000000000000000000000000000000000031
-:102FA0000000000000000000000000000000000021
-:102FB0000000000000000000000000000000000011
-:102FC00000000000000000001000000300000000EE
-:102FD0000000000D0000000D3C02080024423B6090
-:102FE0003C03080024633E18AC4000000043202B43
-:102FF0001480FFFD244200043C1D080037BD7FFC07
-:1030000003A0F0213C100800261000983C1C08008A
-:10301000279C3B600E0004AE000000000000000D85
-:103020003C0580008F83003034A800708D070000BD
-:10303000008330253C02900000C22025ACA4002073
-:10304000AF8700243C0480008C8900200520FFFE0F
-:1030500000000000348400708C8500003C180800DB
-:103060008F18007C3C0D08008DAD007800A7C823A8
-:1030700003195021000070210159602B01AE582125
-:10308000016C38213C010800AC2A007C3C0108009E
-:10309000AC27007803E00008000000000A00003DB3
-:1030A000240400018F8500303C048000348300013B
-:1030B00000A3102503E00008AC82002003E0000814
-:1030C000000010213084FFFF30A5FFFF10800007B3
-:1030D000000018213082000110400002000420424C
-:1030E000006518211480FFFB0005284003E000085C
-:1030F0000060102110C00007000000008CA200003A
-:1031000024C6FFFF24A50004AC82000014C0FFFB0E
-:103110002484000403E000080000000010A0000860
-:1031200024A3FFFFAC8600000000000000000000A8
-:103130002402FFFF2463FFFF1462FFFA24840004CB
-:1031400003E000080000000090AA00318FAB0010DF
-:103150008CAC00403C0300FF8D680004AD6C002087
-:103160008CAD004400E060213462FFFFAD6D0024AF
-:103170008CA700483C09FF000109C024AD67002866
-:103180008CAE004C0182C82403197825AD6F000471
-:10319000AD6E002C8CAD0038314A00FFAD6D001CC7
-:1031A00094A900323128FFFFAD68001090A70030CD
-:1031B000A5600002A1600004A167000090A3003296
-:1031C000306200FF00021982106000052405000132
-:1031D0001065000E0000000003E00008A16A000175
-:1031E0008CD80028354A0080AD7800188CCF0014A8
-:1031F000AD6F00148CCE0030AD6E00088CC4002C76
-:10320000A16A000103E00008AD64000C8CCD001C35
-:10321000AD6D00188CC90014AD6900148CC8002471
-:10322000AD6800088CC70020AD67000C8CC200148C
-:103230008C8300700043C82B13200007000000009F
-:103240008CC20014144CFFE400000000354A0080DA
-:1032500003E00008A16A00018C8200700A0000C629
-:10326000000000009089003027BDFFF88FA8001CE7
-:10327000A3A900008FA300003C0DFF8035A2FFFF33
-:103280008CAC002C00625824AFAB0000A1000004FD
-:1032900000C05821A7A000028D06000400A048210C
-:1032A0000167C8218FA50000008050213C18FF7FD6
-:1032B000032C20263C0E00FF2C8C0001370FFFFF53
-:1032C00035CDFFFF3C02FF0000AFC82400EDC02455
-:1032D00000C27824000C1DC00323682501F8702566
-:1032E000AD0D0000AD0E00048D240024AFAD000034
-:1032F000AD0400088D2C00202404FFFFAD0C000C51
-:103300009547003230E6FFFFAD06001091450048BA
-:1033100030A200FF000219C2506000018D24003469
-:10332000AD0400148D4700388FAA001827BD00088F
-:10333000AD0B0028AD0A0024AD07001CAD00002C29
-:10334000AD00001803E00008AD00002027BDFFE03D
-:10335000AFB20018AFB10014AFB00010AFBF001C87
-:103360009098003000C088213C0D00FF330F007F93
-:10337000A0CF0000908E003135ACFFFF3C0AFF006B
-:10338000A0CE000194A6001EA22000048CAB001465
-:103390008E29000400A08021016C2824012A4024E9
-:1033A0000080902101052025A6260002AE240004FD
-:1033B00026050020262400080E00007224060002C4
-:1033C00092470030260500282624001400071E001E
-:1033D0000003160324060004044000032403FFFF37
-:1033E000965900323323FFFF0E000072AE23001007
-:1033F000262400248FBF001C8FB200188FB1001448
-:103400008FB0001024050003000030210A00007C6A
-:1034100027BD002027BDFFD8AFB1001CAFB00018FA
-:10342000AFBF002090A900302402000100E050212D
-:103430003123003F00A040218FB000400080882150
-:1034400000C04821106200148FA70038240B00052B
-:1034500000A0202100C02821106B001302003021A1
-:103460000E000108000000009225007C30A400023C
-:103470001080000326030030AE0000302603003425
-:103480008FBF00208FB1001C8FB00018006010218A
-:1034900003E0000827BD00280E000087AFB0001031
-:1034A0000A00014F000000008FA3003C0100202112
-:1034B0000120282101403021AFA300100E0000CED2
-:1034C000AFB000140A00014F000000008F820050CE
-:1034D00024430001304200FFAF83005003E00008A6
-:1034E000000000003C0580008CA30E108F84004477
-:1034F000AC8300208CA20E1803E00008AC820024EC
-:103500003C0580008CA30E148F840044AC83002003
-:103510008CA20E1C03E00008AC82002493820038C9
-:103520001040001B2483000F2404FFF000643824A3
-:1035300010E00019978B002C9784004C9389002E83
-:103540003C0A601C0A0001900164402301037021C1
-:10355000006428231126000231C2FFFF30A2FFFFC2
-:103560000047302B50C0000E00E448218D4D000C68
-:1035700031A3FFFF00036400000C2C0304A1FFF340
-:103580000000302130637FFF0A000188240600011B
-:1035900003E00008000000009784004C00E448218C
-:1035A0003123FFFF3168FFFF0068382B54E0FFF83C
-:1035B000A783004C938A002E11400005240F0001C0
-:1035C000006BC023A380002E03E00008A798004CE6
-:1035D000006BC023A38F002E03E00008A798004CC7
-:1035E00003E000080000000027BDFFE8AFB00010B6
-:1035F0003084FFFF3C10800093A8002BAFBF001465
-:10360000A6040144960A0E1630C600FF8FA90030AA
-:10361000A60A0146AE050148A2060152A608015AB3
-:10362000AE0701608FA3002CA609015801202021BC
-:103630000E00017CAE0301543C021000AE02017882
-:103640008FBF00148FB0001003E0000827BD0018E2
-:103650003C038000346200708C4900008F87003C7E
-:103660002484000727BDFFF83084FFF8AF890024C9
-:103670003C088000950E008A31CDFFFFAFAD000001
-:103680008FAC000001875823256AFFFF31461FFFDA
-:1036900000C4282B14A0FFF7350D00708DAC00007E
-:1036A0003C0508008CA500843C0A08008D4A008077
-:1036B000018958230000102100ABC0210007C882F7
-:1036C00001422021030B302B0019388035094000BE
-:1036D0000086782100E9102127BD00083C01080080
-:1036E000AC3800843C010800AC2F008003E00008E7
-:1036F000000000008F82003C2486000730C5FFF8E0
-:1037000000A2182130641FFF03E00008AF84003CD2
-:103710003C0320FF27BDFFE83C0760003C08800019
-:10372000240500103464FFFDACE53008AFBF001085
-:10373000AD040E00000000000000000000000000CA
-:1037400000000000000000003C0200FF345FFFFDAD
-:10375000AD1F0E003C0B60048D7850002419FF7FD4
-:103760003C0E00020319782435EC380C35CD0109E4
-:10377000ACED4C1824060009AD6C50008CEA0438FE
-:10378000AD060008AD0000148CE94C1C3145FFFF6C
-:103790003C06570900091E0238A42F713062000F41
-:1037A00034C80010AF820048104000072485C0B321
-:1037B0008CEB4C1C3C0D001F35ACFC00016C502404
-:1037C000000A49C2AF8900348CF90808241FF000B0
-:1037D000033FC02403087026030678262DE8000165
-:1037E0002DC600010106382550E00009A3800038ED
-:1037F0003C09601C8D24000824030001A3830038C9
-:1038000030827C00A780004CA380002EA782002C71
-:10381000AF80005014A00003AF80003C3C05600066
-:10382000ACA0442C0E000559000000008FBF001012
-:103830000A000E9927BD001827BDFFC8AFB3002CA2
-:10384000AFB20028AFBF0030AFB10024AFB000204E
-:10385000936200080080982100A090211440003558
-:10386000240400100E0001C9000000000E000168D1
-:10387000004080210002C4003C1932000319882551
-:10388000AE110000936F0009976E0012936A000A50
-:1038900031EC00FF31CDFFFF018D5821000B4400BA
-:1038A000314900FF01093825AE0700048F8500501B
-:1038B0009784004000403021308320001460004D88
-:1038C000AE050008AE00000C3C0580009784004067
-:1038D0000662004F8E03000C3090000816000002B4
-:1038E000264800062648000294A40E148CA50E1C3F
-:1038F0008F670004936A00023084FFFF314900FFA4
-:10390000AFA900108F720014AFA800180E0001AF0D
-:10391000AFB200148FBF00308FB3002C8FB20028DD
-:103920008FB100248FB00020240400100A0001F29F
-:1039300027BD00389365000997710012936C000B46
-:1039400030AD00FF01B13021318B00FF00CB802171
-:103950002602000A3050FFFF0E0001C9020020219C
-:103960000E000168004088219368000997640012E6
-:103970000002FC00310900FF308AFFFF012A3821D4
-:1039800024E3000203E3C0253C1941000319782514
-:10399000AE2F00008F6E000C3C0D800095AC0E1415
-:1039A00001D32825AE2500048DA50E1C8F670004C9
-:1039B000936B00023184FFFF316600FFAFA6001059
-:1039C0008F68001400403021AFB200180E0001AF24
-:1039D000AFA80014020020218FBF00308FB3002C4D
-:1039E0008FB200288FB100248FB000200A0001F2AE
-:1039F00027BD0038976200123C0580009784004084
-:103A0000305FFFFF0661FFB4AE1F000C8E03000C99
-:103A10003C078000006798250A00026BAE13000C7B
-:103A200027BDFFD8AFB40020AFBF0024AFB3001C48
-:103A3000AFB20018AFB10014AFB00010936200082D
-:103A4000144000940080A021AF60000C97850040D6
-:103A500030A440001080009E24030016241040076C
-:103A6000A363000AAF700014938F00428F6C0014A0
-:103A700031EE0001000E6A40018D5825AF6B001435
-:103A8000978A00408F6800143149001001093825D9
-:103A9000AF6700149786004030C300081060009F95
-:103AA000000000008F6600143C0310003C048000FE
-:103AB00000C32825AF65001494820E0A3C1F8100C4
-:103AC0002413000E3059FFFF033FC025AF780004D8
-:103AD000A37300029372000A3406FFFC265100040F
-:103AE000A371000A978800403107200010E0009180
-:103AF000000000003C0B80009789004095680E0C88
-:103B000097840040000918423107C0003065000367
-:103B100000071303309F100000A2C025001FCA0336
-:103B200003199825001390C0A772001297910040C6
-:103B3000936F000A00118182320E003C01CF682190
-:103B400025AC003CA36C0009956A0E0C31493FFF7F
-:103B5000A7690010976D0012936C0009018D582120
-:103B6000256A00023149000700094023310300079C
-:103B7000A363000B93670009976400129765001018
-:103B800030E200FF8F900028979800400044F82111
-:103B900003E5C82103269821331200401240000596
-:103BA0003266FFFF00D0702B3C11800011C0001660
-:103BB000000090210206782B15E0002D0000202146
-:103BC0003C1080008E120E143C058000AE120E10C8
-:103BD0008E110E1CAE110E18AE060E008CB8000031
-:103BE000331300081260FFFD0000000094B90E08B6
-:103BF00000C0802100008821A79900408CA60E04F7
-:103C000024120001AF860028977F001033F3FFFFD6
-:103C10008E8900000130202310800058AE840000FF
-:103C2000022020210E000243020028218E8C000079
-:103C300015800005000000008F6D0014240EFFBFEA
-:103C400001AEA024AF7400148F78000C03138821F8
-:103C5000AF71000C936F000815E000030000000036
-:103C60001640004000000000A3720008020020215E
-:103C70008FBF00248FB400208FB3001C8FB20018B8
-:103C80008FB100148FB000100080102103E00008F5
-:103C900027BD00288F900028978200403C118000AB
-:103CA000020098213045004014A0FFD90000902167
-:103CB000976800108F8700283103FFFF1467FFEC1F
-:103CC00000002021000088210A000339241200018D
-:103CD0002403000E24104007A363000AAF700014F1
-:103CE000938F00428F6C001431EE0001000E6A4089
-:103CF000018D5825AF6B0014978A00408F6800141F
-:103D00003149001001093825AF670014978600403B
-:103D100030C300081460FF6300000000AF600004BF
-:103D2000A3600002978800403107200014E0FF7173
-:103D300000003021A760001297910040936F000AA5
-:103D40003C0B800032301F000010718301CF6821CE
-:103D500025AC0028A36C0009956A0E0C0A00030A22
-:103D6000A76A00108F6600143C1FEFFF37F9FFFEB3
-:103D700000D998240A00034FAF7300148F6B00140E
-:103D8000356A00400E00016EAF6A00140A00033E5F
-:103D9000022020218F8500448F8A003027BDFFC07C
-:103DA0003C048000AFB70034AFB40028AFB1001CB2
-:103DB000AFBF0038AFB60030AFB5002CAFB30024B2
-:103DC000AFB20020AFB000188C8701048CA900248A
-:103DD000AC8A00808CA8002000E988230000B8216C
-:103DE000AC880E108CA600240000A021AC860E1812
-:103DF0008C820E10AC820E148C830E18AC830E1CB9
-:103E0000122000333C168000936B000811600054B0
-:103E100000000000976E001031CDFFFF022D602BD7
-:103E20001580004F0000000097700010320FFFFF58
-:103E3000AECF0E003C0580008CB30000327200084B
-:103E40001240FFFD0000000094B50E088CA50E0482
-:103E500032B0FFFF32140001128000440000000065
-:103E60000000000D3219A04024180040133800450E
-:103E70003214A0001280003F00000000937300087D
-:103E80001260000927A4001097620010305FFFFF46
-:103E900000BFC82B53200005AFB10010320800400E
-:103EA0001100003400000000AFB10010A7900040E6
-:103EB000AF8500280E0002BD000000000040A021D8
-:103EC000104000BE8FB100101620FFCF0000000090
-:103ED0002E96000102D78825122000178FBF0038C8
-:103EE0008F85003024170F0010B700713C0480004C
-:103EF0008C8F017805E0FFFE24180F0050B8008F6A
-:103F00003C0480008C990E14241402403C051000DF
-:103F1000AC9901448C930E1CAC930148A0800152D3
-:103F2000A480015AAC800160A4800158AC94015473
-:103F3000AC8501788FBF00388FB700348FB6003062
-:103F40008FB5002C8FB400288FB300248FB20020CF
-:103F50008FB1001C8FB0001803E0000827BD00409F
-:103F6000AED10E000A0003C33C05800014A0FFBEC2
-:103F70003219A0400E0001750000A0210A0003EADA
-:103F80002E9600013C0380008C7F017807E0FFFE45
-:103F9000240208008F84003CAC6201783C0380005E
-:103FA000946B008A316AFFFF0144382324E9FFFF44
-:103FB00031281FFF2D06000814C0FFF9346C4000A3
-:103FC00000A0A0210E000168008C90218F8300309A
-:103FD00024040F000040A821023488233C068000FE
-:103FE0001064000524050001938E004231C50001D4
-:103FF00000056A4035A500010015FC003C020100E7
-:1040000003E2C825AE5900008F93005032180036E5
-:10401000320F0008AE53000411E0004100B89825AB
-:1040200094C30E0A8F84003C3C0B8100306AFFFF72
-:104030002492000832481FFF014B48253C0710001E
-:10404000269200062410000EACC901600267982574
-:10405000A4D0015AAF88003CA4D201581620000811
-:104060003C1080008F8E003024050F0051C50002E7
-:1040700024170001367300400E00016E3C108000D2
-:104080008E180E1402402021AE1801448E0F0E1C13
-:10409000AE0F0148A2150152AE1301540E00017C6F
-:1040A0003C151000AE1501780A0003E7000000007F
-:1040B000128000053C07800094F20E08324900404F
-:1040C00011200042000000008C8A01780540FFFEAC
-:1040D0000000000094950E103C1005002403200001
-:1040E00032AEFFFF01D06825AC8D014C8C8C0E14D4
-:1040F0003C0B1000AC8C01448C860E1CAC86014835
-:10410000A0800152A480015AAC800160A4800158B3
-:10411000AC830154AC8B01780A0003F13C048000AD
-:104120008F8D003C26920002A4D2015825AC0008D5
-:1041300031861FFF0A00044CAF86003CAC80014C66
-:1041400012800019000000008C9F0E10AC9F0144EB
-:104150008C830E183C08800024110040AC83014879
-:104160008FBF0038A10001528FB70034A500015A5B
-:104170008FB60030AD0001608FB5002CA50001584E
-:104180008FB40028AD1101548FB300248FB20020EA
-:104190008FB1001C8FB000183C04100027BD0040F8
-:1041A00003E00008AD0401788C820E14AC82014457
-:1041B0008C830E1C0A00048B3C0880000E000175E5
-:1041C0002E9600010A0003EB02D7882500000000AC
-:1041D0000000000D000000002400033A0A000467FC
-:1041E0003C04800027BDFFD8AFB100143C11800013
-:1041F000AFB00010AFB40020AFB3001CAFB20018D6
-:10420000AFBF00243C13080026733C340E0001F9B4
-:10421000363000703C14080026943CB40200902113
-:104220008E0800008E2400003883000130620001F7
-:10423000104000163C0A8000024048218D270000F3
-:104240003C1F08008FFF006C3C0F08008DEF0068DA
-:1042500000E8102303E260210000C0210182702BDE
-:1042600001F8682101AE40213C010800AC2C006C33
-:104270003C010800AC2800688D4B00003966000145
-:1042800030C5000114A0FFED00E040218E1F0000AA
-:104290003C1808008F18006C3C0D08008DAD0068BC
-:1042A00003E8C823031938210000702100F9602BAE
-:1042B00001AE4021010C58213C010800AC27006CE4
-:1042C0003C010800AC2B00688E2801002406FF800A
-:1042D0003C04800A2505024000A64824AE280020A0
-:1042E000AE2900248E09000030A3007F0064502115
-:1042F0003C078000AF8A0044AF880030AF890024BB
-:104300008CE201780440FFFE000000008E1F0000D8
-:104310003C1808008F1800743C0D08008DAD00702B
-:1043200003E9C82303195821000070210179302BBB
-:1043300001AE602101864821240508003C010800E7
-:10434000AC2B00743C010800AC290070ACE501788E
-:1043500090E40108A384004293830042306A000184
-:104360001140000F240E0D002502F8002C47030118
-:1043700010E0001C000819C22464FFF00004504241
-:10438000000A41400E00039A0113D8213C0A400064
-:104390003C088000AD0A01380A0004BD000000009E
-:1043A000110E0026240F0F00110F002A3C02800876
-:1043B0003447008090FF00002418005033F900FFBC
-:1043C0001738FFF33C0A40000E0009A3000000006C
-:1043D0003C0A40003C088000AD0A01380A0004BDD8
-:1043E000000000008F8400340064282B14A0000B10
-:1043F0008F86004800866021258BFFFF0163482BD4
-:104400001520000600646823000D19400E00039A71
-:104410000074D8210A0005193C0A40000000000081
-:104420000000000D00000000240003AD0E00039A00
-:10443000000000000A0005193C0A40003C1B08006F
-:10444000277B3DB40E00039A000000000A00051906
-:104450003C0A40003C1B0800277B3DD40E00039A19
-:10446000000000000A0005193C0A40008F8200503D
-:1044700024430001304200FFAF83005003E00008F6
-:1044800000000000000411C003E0000824420240C4
-:104490003C04080024843BCC2405001A0A00007C5C
-:1044A0000000302127BDFFE0AFBF001CAFB20018F5
-:1044B000AFB10014AFB000103C108000920B0109A6
-:1044C0002412FF800E0005563164007F8F9100306A
-:1044D0000051502101524024AE08002492030109EA
-:1044E0000E0005563064007F24060080240700C0BB
-:1044F00024040040AE000810AE040814AE060818EC
-:10450000AE07081C920C01090051F82133F8007F16
-:104510003C19800A031910213184007F0E000556D2
-:10452000AF8200448E1101003C0C008035850001F3
-:104530000222782101F24824AE0908048E0E0100FF
-:10454000359800023609090001C2682131AB0078B4
-:1045500001655025AE0A08208E0501008E08010075
-:10456000360509800102182124640040009230249D
-:10457000AE0608088E07010000E2F82127F9004086
-:104580003332007802588825AE1108248E040100C9
-:10459000952F000C8FBF001C8FB2001831EEFFFF6B
-:1045A000000E69C0AE0D0800AE0C0828952B000C5B
-:1045B0008FB10014316AFFFF000A41C0AE08002C21
-:1045C0008CA300508FB000108CA2003C8D240004FE
-:1045D0008CA6001C8CA7003827BD0020AF83006884
-:1045E000AF820058AF840054AF86006003E000083B
-:1045F000AF8700643C0A0800914A3BF13C0908007F
-:1046000095293BEA3C051100000A3C0025280002E0
-:1046100000E8302500C5182524820008AC8300007E
-:1046200003E00008AC8000043C0880003507090066
-:1046300090E60011240200280080502130C300FFC2
-:1046400000A0602110620002340B86DD240B0800FC
-:104650003C07800034E20A9A9459000034EF0A9C27
-:1046600034ED0AA03338FFFFAD5800008DEE000096
-:1046700034E80A8024040001AD4E00048DA9000036
-:10468000AD4900089105001930A3000310640043F0
-:104690002866000214C000B0240400021064008BDD
-:1046A000240500031065009634E60AA43C090800BE
-:1046B00095293BE0240208005162004D3C0E800029
-:1046C0003C0E800035C5090090A6001290B9001973
-:1046D00035CB09808D68002830C700FF000778803F
-:1046E0003138FFFF332300FF01F8102100032500BC
-:1046F0000088702500025C003C0D600001CD302573
-:10470000356906FFAD490004AD4600008CA7002CBA
-:1047100025490028AD4700088CB90030AD59000C80
-:104720008CB80034AD5800108CAF0038AD4F001479
-:104730008CA3001CAD4300188CA800203C03800013
-:104740003462093CAD48001C8CA40024346F09007D
-:10475000AD4400208CAD0028AD4D00248C590000E4
-:10476000AD2C000425220014AD3900008C78010C1A
-:10477000AD38000891E800123C04080090843BF03A
-:10478000AD20001000082F0000046C0000AD602573
-:10479000358AFFFF03E00008AD2A000C3C09080041
-:1047A00095293BE03C0F080095EF3BEA34F90AA459
-:1047B0003C0E080095CE3BDC972800003138FFFF07
-:1047C00001F8682101AE382300082C0024E3FFF231
-:1047D00000A3202524020800AD44000CAD400010C9
-:1047E000AD4B00141562FFB6254A00183C0E800040
-:1047F00035CD090091A2001191A700193C050800D0
-:1048000094A53BE6304600FF35CB0A80956E002A22
-:104810000006C88230F800FF9787005C00191E0070
-:1048200000187C003128FFFF00A82021006F4825D8
-:104830000124102501C730213C0B4000004BC82546
-:104840000006C400AD590000AD58000491AF001837
-:104850003C03000624E90001000F46000103702517
-:10486000AD4E00088DA5002C3C0380003462093C4D
-:10487000AD45000C8DAB001C31247FFF2549001491
-:10488000AD4B00108C590000AD2C0004346F0900B2
-:10489000AD3900008C78010CA784005C252200143F
-:1048A000AD38000891E800123C04080090843BF009
-:1048B000AD20001000082F0000046C0000AD602542
-:1048C000358AFFFF03E00008AD2A000C34E20AA499
-:1048D00094460000951900283C09080095293BE002
-:1048E0000006C40000197C00370E810001EB68252A
-:1048F000AD4E000CAD4D00100A0005E2254A001433
-:104900003C09080095293BE03C18080097183BEA51
-:104910003C0F080095EF3BDC94CE00003139FFFFDF
-:10492000950D002803194021010F3823000E2400A3
-:10493000000D2C0024E3FFEE00A33025348281001B
-:10494000AD42000CAD460010AD400014AD4B001858
-:104950000A0005E2254A001C1460FF5434E90AA449
-:10496000952800003C09080095293BE000083C0020
-:1049700000EB1825AD43000C0A0005E2254A0010A3
-:1049800003E00008240207D027BDFFE0AFB2001803
-:10499000AFB10014AFB00010AFBF001C0E00005C40
-:1049A000008088218F8800588F8700543C0580083C
-:1049B00034B20080011128213C10800024020080C4
-:1049C000240300C000A72023AE0208183C0680087C
-:1049D000AE03081C18800004AF850058ACC5000465
-:1049E0008CC90004AF8900541220000936040980E4
-:1049F0000E00069500000000924C00278E0B0074FC
-:104A000001825004014B3021AE46000C360409806F
-:104A10008C8E001C8F8F006001CF682319A00004CA
-:104A20008FBF001C8C90001CAF9000608FBF001CDB
-:104A30008FB200188FB100148FB000100A00005E12
-:104A400027BD00208F8600688F8300588F82005416
-:104A50003C05800834A40080AC860050AC83003C48
-:104A600003E00008ACA200043C038000346700703F
-:104A70008CE30000308700FF3C0408008C84005465
-:104A800027BDFFF830AA00FF248200013C01080086
-:104A9000AC22005430C800FFAF8300243C098000E2
-:104AA0008D25017804A0FFFE352B00708D65000078
-:104AB000A3A700033C1808008F1800748FB90000EA
-:104AC0003C0D08008DAD007000A338233C047FFF2F
-:104AD00000E078213482FFFF0307382100007021B5
-:104AE0000322582401AE302100EF602B000847C09C
-:104AF00000CC182101682825AFA500003C01080062
-:104B0000AC2700743C010800AC2300709124010A1A
-:104B1000A3A000023C0280FFA3A400018FB8000004
-:104B2000314F007F3459FFFF03196824000F7600CE
-:104B30003C0B002001AE6025356A20002408FF8070
-:104B40003C06100027BD0008AD2C014CAD2A0154D5
-:104B5000A5200158A128015203E00008AD260178E4
-:104B60003C038000346200708C480000308A00FFF3
-:104B700030A900FFAF8800243C0480008C850178B8
-:104B800004A0FFFE348700708CEB00003C05080099
-:104B90008CA500743C1908008F390070016820232F
-:104BA00000A470210000102101C4C02B0322782131
-:104BB0003C07800001F868213C010800AC2E00741D
-:104BC00034E60A003C010800AC2D00708CCC0020BB
-:104BD0000009582B34E80980ACEC01448CC900244E
-:104BE000000B1540ACE90148A0EA01509104004CCB
-:104BF000A0E4016D03E00008A4E0015827BDFFE830
-:104C0000308400FFAFBF00100E00070D30A500FF7D
-:104C10008F8300588FBF00103C0580003446004051
-:104C20002404FF903C02100027BD0018ACA3014CE7
-:104C3000A0A40152ACA6015403E00008ACA2017884
-:104C400027BDFFE03C088008AFBF001CAFB20018D2
-:104C5000AFB10014AFB00010351000808E06001800
-:104C60003C078000309200FF00C72025AE040018EA
-:104C70000E00005C30B100FF9203000534620008B2
-:104C80000E00005EA2020005024020210E00073443
-:104C900002202821024020218FBF001C8FB2001863
-:104CA0008FB100148FB00010240500052406000108
-:104CB0000A0006CF27BD00203C08800027BDFFE882
-:104CC000AFB0001035050980AFBF001490A70009F0
-:104CD000240200063506090030E300FF241000041A
-:104CE000106200722408000294AE005C3C0D0204C5
-:104CF00031CCFFFF018D5825AC8B000090AA000835
-:104D000031490020112000080000000090BF004E33
-:104D10003C1901033738030033EF00FF01F8282561
-:104D200024100008AC85000490CC001190C900113B
-:104D3000318A00FF000A5882312700FF256A0005EA
-:104D4000000A108038E300281460002900824823FC
-:104D500090CF00123C1980003722090031E500FF96
-:104D60000005708001D06821000D340034C406FFB6
-:104D7000AD240004904C001190580012373F098078
-:104D80008FE400348F2F010C00105882330500FF90
-:104D900000AB702100083400008F1823000E6F0054
-:104DA00001A61025319F00FC3067FFFF03E9C021F9
-:104DB0000047C825014B7821000F2880AF19000C4F
-:104DC0000E00005C012580213C0A800824090004B3
-:104DD000354800800E00005EA10900090200102184
-:104DE0008FBF00148FB0001003E0000827BD00182B
-:104DF00090CE001190CD00193C07080094E73BE6E7
-:104E000031C600FF0006208231AC00FF00045E00C6
-:104E1000000C1C00016310250047C8253C1F400002
-:104E2000033FC0253C198000AD380000372209003F
-:104E3000904C001190580012373F09808FE40034E5
-:104E40008F2F010C00105882330500FF00AB70213A
-:104E500000083400008F1823000E6F0001A61025F3
-:104E6000319F00FC3067FFFF03E9C0210047C825E0
-:104E7000014B7821000F2880AF19000C0E00005C58
-:104E8000012580213C0A800824090004354800805F
-:104E90000E00005EA1090009020010218FBF00145E
-:104EA0008FB0001003E0000827BD00180A00076F4C
-:104EB0002408001227BDFFD8AFB40020AFB3001CF8
-:104EC000AFB20018AFB10014AFBF0024AFB00010F4
-:104ED0003C06800090C3010B309200FF30B300FF0E
-:104EE000306200300000A0211040007000008821D6
-:104EF00034C409809088000800083E0000072E0393
-:104F000004A00097240400048F8800583C01080086
-:104F1000A0243BF03C0C8000AD8000483C038000A6
-:104F2000906E010B31C5002010A000073C028000EC
-:104F300034790980933800080018860000107E0339
-:104F400005E2009C3C0280083450090034470A8086
-:104F5000904D010B94EB002C92030011921F001254
-:104F600090E50018307800FF33F900FF00197880D1
-:104F700001F8702101D1502130B100FF01514821C9
-:104F80002524000A31AC00403091FFFF000C302B8B
-:104F900002202021A78B005C3C010800A42A3BE6EC
-:104FA0003C010800A4293BE83C010800A4293BEA95
-:104FB0003C010800A4203BE03C010800A4203BDCAD
-:104FC0000E0001C9010680230E0005B20040202119
-:104FD000004020210E0005BF020028211680005C41
-:104FE000000000000E0001F2022020213C08080011
-:104FF00091083BF031140003128000163C1F80081A
-:105000008F8400583C0C800835860080248B00017A
-:10501000ACCB003C3C0580088CAA00040160202138
-:10502000014B482319200002AF8B00588CA40004C8
-:105030000E000695ACA400043C0F80008DEE0074B9
-:105040003C05800834AD0080004E8821ADB1000CD5
-:105050003C1F800837F9008002402021026028218F
-:10506000A320006B0E00070D3C1280008F980058A3
-:1050700034500006AE58014C0E0005503C13100091
-:10508000A24201528FBF0024AE5001548FB40020C1
-:10509000AE5301788FB100148FB3001C8FB200188B
-:1050A0008FB0001003E0000827BD002834C309803A
-:1050B000906F0008000F7600000E6E0305A000330D
-:1050C00034C209009059001B241F00103C01080045
-:1050D000A03F3BF0333800021300FF908F88005848
-:1050E0008F8300641468FF8E3C0380000E00005C18
-:1050F000000000003C0980083525008090A40009CC
-:1051000024070016308800FF1107000D0000000082
-:1051100090A600093C0C0800918C3BF0240A000882
-:1051200030C400FF358B00013C010800A02B3BF090
-:10513000108A002F240D000A108D00282402000C74
-:105140000E00005E000000000A0007FC8F88005877
-:105150000E000763004020210A00082E0000000016
-:105160003C0B8008356A00808D4800548CC9010CC6
-:105170001120FF66AF880058240600143C01080087
-:10518000A0263BF00A0007FB3C0C80009071000851
-:10519000241400023C010800A0343BF0323000200F
-:1051A0001200000B241400018F8800580A0007FC2D
-:1051B00024110008345F00808FE70038AC470004FA
-:1051C0008C430004AFE3003C0A0008073C02800067
-:1051D0008F8800580A0007FC24110004A0A20009CF
-:1051E0000E00005E000000000A0007FC8F880058D7
-:1051F000240200140A0008ADA0A2000927BDFFE8A0
-:10520000AFBF0014AFB000103C1080009202010943
-:10521000240500010E00070D304400FF3C1F8008EC
-:1052200093F8000E37E3008093F9000F906E00268C
-:1052300093E9000A332F00FF00186600000F6C008E
-:1052400031CB00FF018D5025000B3200014638257F
-:10525000312800FF3445600000E820252402FF814A
-:105260003C031000AE04014C8FBF0014AE05015486
-:10527000A2020152AE0301788FB0001003E00008D3
-:1052800027BD001827BDFFE8308400FFAFBF001026
-:105290000E00070D30A500FF344600403C0480009E
-:1052A0002405FF92AC860154A08501528F830058DB
-:1052B0008FBF00103C02100027BD0018AC83014CCA
-:1052C00003E00008AC82017827BDFFD8AFB2001818
-:1052D000AFB10014AFB00010AFBF0020AFB3001CDF
-:1052E0003C07800090E20109308600FF30B000FFEB
-:1052F000000618C232040002307100011480000759
-:10530000305200FF3C098008353300809268000568
-:105310003105000810A0000C30CA00100240202106
-:105320000E00074502202821240200018FBF002023
-:105330008FB3001C8FB200188FB100148FB0001013
-:1053400003E0000827BD00281540003034E50A00BE
-:105350008CB900248CB800081338004700004021A5
-:105360003C0E800835D30080926D0068240B00024B
-:1053700031AC00FF118B00803C068000927F004C16
-:1053800090C40109509F00043213007C1100006793
-:10539000000000003213007C1660005A02402021F9
-:1053A00016200008320C00013C07800034EB0A0094
-:1053B0008D6500248CE8010414A8FFDC0000102196
-:1053C000320C00011180000D024020213C108000B1
-:1053D0008E0E010C8F8D006811CD000800000000BA
-:1053E0000E0007E2022028218E0F010C3C188008D5
-:1053F00037100080AE0F0050024020210E0007340D
-:10540000022028210A000900240200013C070800AC
-:105410008CE7006424E600013C010800AC2600642F
-:105420001600000D00000000022028210E000734A5
-:1054300002402021926F0068240D000231EE00FF2F
-:1054400011CD0022024020210E0008B4000000000F
-:105450000A000900240200010E00003D240400019E
-:10546000926C0025020C58250E00005EA26B0025F0
-:105470000A000940022028218E6300188CE40104F0
-:105480008CBF002400031602149FFFB53045007F37
-:105490009269004C264400013093007F1265004061
-:1054A000312300FF1464FFAF3C0E80082648000142
-:1054B0003111007F310200FF1225000B240800018A
-:1054C000004090210A00090D241100012405000468
-:1054D0000E0006CF240600010E0008B400000000F4
-:1054E0000A000900240200012407FF800247282443
-:1054F00000A79026324200FF004090210A00090DCB
-:10550000241100010E0007E202202821320600309B
-:1055100010C0FFA332100082024020210E00074578
-:10552000022028210A000900240200018E630018CD
-:105530000240202102202821006610250E0008D6F6
-:10554000AE6200189264004C24050003240600019A
-:105550000E0006CF308400FF0E00003D2404000141
-:10556000926A0025020A48250E00005EA269002505
-:105570000A000900240200018E7800183C198000FE
-:105580000240202103197825022028210E0007342B
-:10559000AE6F00189264004C0A00098824050004CC
-:1055A0003246008038CA0080146AFF6E3C0E8008C4
-:1055B0000A0009612648000127BDFFC0AFB00018EE
-:1055C0003C108000AFBF0038AFB70034AFB600303A
-:1055D000AFB5002CAFB40028AFB30024AFB20020A9
-:1055E0000E00055EAFB1001C920401089205010B8C
-:1055F000308400FF0E0008E730A500FF144000D6FD
-:105600008FBF00383C09800835280080A100006B5E
-:105610003607098090E60000240200503C1708007D
-:1056200026F73DF430C300FF3C14080026943E04E6
-:10563000106200033C1080000000B8210000A0218F
-:10564000241F001036110A00361309808E1601043B
-:105650008F8D00588E38002436190A808E720020F3
-:105660003C010800A03F3BF0972C002C8EF5000079
-:10567000932B0018024D702302D878233C010800B8
-:10568000AC2F3BCC3C010800AC2E3BD03C010800C9
-:10569000AC2D3BF4A78C005C02A0F809317200FF2E
-:1056A000304A0002154000DA3045000110A000B475
-:1056B00000000000360509008E2B002490BF001169
-:1056C00090B9001290B6001133EF00FF333800FF9D
-:1056D00032CD00FF0018708001CF8021024D602183
-:1056E0000212A821258A00103C010800A4353BE8DD
-:1056F0003C010800AC2B3BF83C010800A42A3BE429
-:105700003C010800A4303BE60260B0213C1580005B
-:105710008F9200588F8400608ED3002024110006E1
-:1057200000923023027228233C010800AC313BEC8C
-:1057300004C000AF0000982104A000AD00C5102BEC
-:10574000104000AF000000003C010800AC263BD038
-:105750008E9000000200F8090000000030430002B3
-:105760001460006F004088213046000154C00011D1
-:105770008E9200043C0808008D083BD43C09C00010
-:105780003C04800001093825AEA70E008C8B000078
-:10579000316A00081140FFFD00000000948D0E08E2
-:1057A00024130001A78D00408C8C0E04AF8C0028C0
-:1057B0008E9200040240F8090000000002228825B1
-:1057C000322E000215C000A5000000003C180800A1
-:1057D00097183BDC3C12080096523BE83C19080045
-:1057E00097393BDE3C0708008CE73BD4031240218D
-:1057F0003C0B08008D6B3BF83C0E080095CE3BF24D
-:105800003C128000011978218E46010C00F86821B5
-:1058100025EC000201AE482101675021AF860068E7
-:105820003C010800AC2A3BF83C010800A4293BE0FD
-:105830003C010800A4283BEA0E0001C93184FFFFA7
-:105840000E000550004080213C010800A0223BF1E1
-:105850008E8200080040F809020020218F85005840
-:105860000E0005BF004020218E90000C0200F809B8
-:10587000004020213C03080094633BEA3C020800FE
-:1058800094423BDE00622021248500020E0001F2DA
-:1058900030A4FFFF3C1908008F393BCC3C1F0800A7
-:1058A0008FFF3BD4033FC0233C010800AC383BCC06
-:1058B00017000006000000003C0508008CA53BEC2A
-:1058C00034BF00403C010800AC3F3BEC126000429A
-:1058D0008F8200448E430E108F930044AE630020ED
-:1058E0008E440E18AE6400243C04080094843BE00F
-:1058F0000E000697000000008F8600588E8A001068
-:105900003C010800AC263BF40140F809000000000F
-:105910003C0908008D293BCC1520FF7E8F92005852
-:105920009796005C3C14800E323500100E0006C6BF
-:10593000A696002C56A000458EEB000432270040AE
-:1059400054E0001E8EF100088EEC000C0180F80976
-:10595000000000008FBF00388FB700348FB60030D2
-:105960008FB5002C8FB400288FB300248FB2002095
-:105970008FB1001C8FB0001803E0000827BD004065
-:10598000920901098F88003000093E0000E83025A7
-:10599000AE0600808E2300208E240024AFA30010CA
-:1059A000AE030E148FA20010AE020E10AE040E1C39
-:1059B000AE040E180A0009E3360509000220F809B2
-:1059C000000000008EEC000C0180F80900000000CF
-:1059D0000A000A8B8FBF0038240800012410000140
-:1059E000A4400020A44800220A000A6FAC50002402
-:1059F0003C010800AC203BD00A000A0A8E9000004F
-:105A00003C010800AC253BD00A000A0A8E90000039
-:105A100092110109000028210E000734322400FFF2
-:105A20008FBF00388FB700348FB600308FB5002C91
-:105A30008FB400288FB300248FB200208FB1001CD8
-:105A40008FB0001803E0000827BD00400160F8098E
-:105A5000000000000A000A85322700405260FFB1B2
-:105A60009796005C8EB60E148F940044AE9600207C
-:105A70008EAF0E1CAE8F00240A000A7E9796005C43
-:105A80008F8200000004218003E0000800821021C2
-:105A90003C07800834E20080904300690080402188
-:105AA000106000093C0401003C0708008CE73BF44F
-:105AB0008F83001C00E320230480000893890008E2
-:105AC00014E300030100202103E0000800801021FE
-:105AD0003C04010003E00008008010211120000BAD
-:105AE000006738233C0D800035AC0980918B007C29
-:105AF000316A0002114000202409003400E9702BB3
-:105B000015C0FFF10100202100E938232403FFFC28
-:105B100000A3C82400E3C02400F9782B15E0FFEAB5
-:105B20000308202130C400030004102314C0001413
-:105B3000304900030000302100A9782101E67021DE
-:105B400000EE682B11A0FFE03C0401002D3800019D
-:105B50000006C82B010548210319382414E0FFDA98
-:105B60002524FFFC2402FFFC00A218240068202149
-:105B700003E00008008010210A000AF42409003024
-:105B80003C0C80003586098090CB007C316A000493
-:105B90001540FFE9240600040A000B030000302131
-:105BA0003C0308008C63005C8F82000427BDFFE883
-:105BB000AFBF001410620005AFB00010000329C091
-:105BC00024A40280AF840000AF8300043C10800056
-:105BD00036030A00946500320E000AD530A43FFF58
-:105BE0008E0401003C180080370F00030082C8219A
-:105BF0002402FF80032260243329007F000CF94037
-:105C000003E94025332E00783C0D1000010D50258E
-:105C100001CF5825AE0C002836080980AE0C080CC0
-:105C2000AE0B082CAE0A0830910300693C06800CCC
-:105C30000126382110600006AF8700208D09003C46
-:105C40008D06006C0126382318E0007F000000005C
-:105C50003C0C8008358B00803C0A8000A160006904
-:105C6000355009808E0200383C06800034C50A0099
-:105C700090AD003C31A8002011000019AF82001C3B
-:105C8000240E00013C19800037300A00A38E000862
-:105C9000AF8000108E0400248F85001024180008A7
-:105CA000AF80000CAF8000143C010800A4383BDE3C
-:105CB0003C010800A4203BF20E000AD9000030216C
-:105CC000920F003C8FBF00148FB00010000F714284
-:105CD000AF82001827BD001803E0000831C20001A0
-:105CE00090B90032240F0001333800FF00182182E0
-:105CF000108F003F241F0002109F006234C20AC0B0
-:105D00003C03800034640A008C9900241720001D95
-:105D10003466090090830030241F00053062003F84
-:105D2000105F004C240500018F86000CA38500083D
-:105D3000AF860014AF8600103C19800037300A008F
-:105D40008E0400248F850010241800083C010800F0
-:105D5000A4383BDE3C010800A4203BF20E000AD927
-:105D600000000000920F003C8FBF00148FB00010A5
-:105D7000000F7142AF82001827BD001803E0000831
-:105D800031C200018C8800088C8D00248CCB00640B
-:105D90003C19800037300A00AF8B0010A380000848
-:105DA0008E0400248F86000C8F850010010D602367
-:105DB00024180008AF8C00143C010800A4383BDE16
-:105DC0003C010800A4203BF20E000AD900000000AC
-:105DD000920F003C8FBF00148FB00010000F714273
-:105DE000AF82001827BD001803E0000831C200018F
-:105DF00090A7003030E3003F5064002834C50AC04B
-:105E00008CAA00241540002234C809008CAB00483D
-:105E10003C0C7FFF3585FFFF016510243C18800096
-:105E2000AF82000C370509008F8E000C8CAF00602C
-:105E300001CF682B15A0000201C020218CA40060B6
-:105E40000A000B75AF84000C8D02006C0A000B5029
-:105E50003C0680008C8900488F86000C3C0A7FFF3E
-:105E60003550FFFF013038243C0480082405000130
-:105E7000AF870014AC80006CA38500080A000B8378
-:105E8000AF8600108C4400140A000B75AF84000C20
-:105E90008D0200680A000BBD3C18800034C40980E4
-:105EA0008C8600708CB0001400D0482B11200004A8
-:105EB000000000008C8200700A000BBD3C188000BE
-:105EC0008CA200140A000BBD3C1880008F850010C6
-:105ED00027BDFFE0AFBF0018AFB1001414A0000849
-:105EE000AFB000103C04800034870A0090E6003018
-:105EF0002402000530C3003F106200B7348409005B
-:105F00008F91000C00A080213C048000348E0A0098
-:105F10008DCD00043C0608008CC63BD031A73FFF66
-:105F200000E6602B5580000100E03021938F0008CF
-:105F300011E0007600D0102B349909809338007C52
-:105F400033040002108000772403003400C3F82BD0
-:105F500017E000D600C3302300D0102B3C0108000E
-:105F6000A4233BDC1440006D020018213C0408000F
-:105F70008C843BCC0064282B54A0000100602021BD
-:105F80003C05800034A90A009128003C3C0108002F
-:105F9000AC243BD4310300201460000200004821EF
-:105FA0008CA90E188F8800180128502B1140005F13
-:105FB000000000003C0508008CA53BD400A960212E
-:105FC000010C582B1160005C00B0682B01093823CC
-:105FD00000E028213C010800AC273BD4120000035C
-:105FE0002402FFFC10B0008C322A000300A2F82427
-:105FF0003C010800A4203BF23C010800AC3F3BD42C
-:1060000003E028218F840010120400063C0380085E
-:106010008C6A006C02002021AF91000C2550000119
-:10602000AC70006C8F8B001400858823AF9100103A
-:1060300001652023AF8400141220000224070018F9
-:10604000240700103C0E800835C6008090CD006803
-:10605000240C00013C010800A0273BF031A700FF01
-:1060600010EC0047000000001480001800002821F8
-:106070003C0B800091650109357109808E23001861
-:1060800030A500FF0003560224A300013146007F23
-:106090003070007F1206007E240CFF803C0F8008C9
-:1060A00035E90080A123004C3C0808008D083BEC3A
-:1060B000240E00023C010800A02E3C31350D0008E2
-:1060C0003C010800AC2D3BEC240500103C1F800077
-:1060D00037E40A009099003C333800201300000593
-:1060E00000A02021240200013C010800AC223BD486
-:1060F00034A400018FBF00188FB100148FB00010BE
-:106100000080102103E0000827BD00203C010800AA
-:10611000A4203BDC1040FF95020018210A000C105F
-:1061200000C018210A000C08240300303C050800B8
-:106130008CA53BD400B0682B11A0FFA80000000084
-:106140003C04080094843BDC0085782101E7702B37
-:1061500011C000072CA200043C1F60008FF95404FA
-:106160003338003F1700FFE3240400422CA2000450
-:106170001040FF9A240400420A000C738FBF0018DD
-:106180001528FFB9000000008CC200183C188000E0
-:10619000241900020058F825ACDF001837040A0063
-:1061A000A0D900689089003C240F000400A01021B1
-:1061B000312800203C010800A02F3C3111000002D2
-:1061C00024050010240200013C010800AC223BCC55
-:1061D0000A000C693C1F80008F8800148C890060C5
-:1061E0000109282B14A00002010088218C91006075
-:1061F0003C0B80008D640E18240A00010220282127
-:1062000002203021A38A00080E000AD90220802132
-:106210000A000BF7AF820018000A182312200007AB
-:10622000306400033C0D800035A7098090EC007CB1
-:10623000318B000415600019248E00043C01080015
-:10624000A4243BF23C18080097183BF203052021D8
-:1062500000C4782B11E0FF6C8F8400102CA6000581
-:1062600014C0FFA42404004230B900031720000228
-:1062700000B9182324A3FFFC3C010800AC233BD445
-:106280003C010800A4203BF20A000C3600602821E3
-:1062900000AC38240A000C5C00EC18263C01080015
-:1062A000A42E3BF20A000CC6000000003C010800CE
-:1062B000AC203BD40A000C72240400428F830014EB
-:1062C0003C0B8000356A0A001460000600001021B3
-:1062D000914600302405000530C400FF10850003FE
-:1062E0000000000003E000080000000091490048A1
-:1062F000312800FF000839C214E0FFFA3C0480088E
-:106300003C06080094C63BDC3C0308008C633BF46D
-:106310003C0508008CA53BD43C18080097183BF2BC
-:106320000066C8218C8E00040325782101F86821BD
-:1063300001AE60231980001D000000009158004C40
-:106340008F8D0020956E0E10330F00FF8DA9000475
-:1063500001CF30238DAA000030CFFFFF000F610076
-:10636000012C2821000038210147202100AC182BE6
-:106370000083C821ADA50004ADB9000091B8000AA2
-:1063800001F87021A1AE000A956C0E128F8A0020D0
-:10639000A54C00089549003825280001A54800387B
-:1063A0009147000D34EB0008A14B000D03E00008FD
-:1063B0000000000027BDFFD8AFB00018938F000881
-:1063C0008FB000143C087FFF8F8700103C0C8000CA
-:1063D0003518FFFFAFBF0020AFB1001C35990A0090
-:1063E00002181824932A003C000F5FC03C02BFFF34
-:1063F0002CF000013449FFFF006BF8253C08080031
-:106400008D083BF48F99001C3C18080097183BEA54
-:1064100003E9582400107F803C07EFFF3C05F0FFA4
-:10642000016F18253C1180003149002034E2FFFF44
-:1064300034ADFFFF362E098027A500102406000288
-:1064400001194023270A00020062182400808021DD
-:1064500015200002000058218D8B0E1CA7AA0012E7
-:106460000500003A2407000030EF00FF000F3F0056
-:10647000006740253C028008AFA80014344B008020
-:10648000916A00683C0F080091EF3BF13C09DFFF87
-:10649000353FFFFF000A602B3C02080094423BE4BA
-:1064A000A3AF0011011FC024000CCF400319182511
-:1064B0008FA70010AFA300143C1F080093FF3BF30D
-:1064C000A7A200168FA8001400ED48243C0B010081
-:1064D0003C0A0FFF012BC82533F80003354CFFFFA2
-:1064E000010D78243C027000032C382400181E0093
-:1064F00000E2482501E35825AFAB0014AFA9001016
-:1065000091DF007CA3BF00150E00007200000000A8
-:10651000362D0A0091A6003C30C4002010800006F1
-:10652000260200083C11080096313BE0262EFFFFB2
-:106530003C010800A42E3BE08FBF00208FB1001C5F
-:106540008FB0001803E0000827BD00288F8A0018CC
-:10655000016A602B5580FFC4240700010A000D501A
-:1065600030EF00FF938300083C02800027BDFFD876
-:1065700034480A0000805021AFBF002034460AC0D2
-:10658000010028211060000E34440980910700307A
-:10659000240B00058F89000C30EC003F118B000BA1
-:1065A00000003821AFA900103C0B80088D69006CF9
-:1065B000AFAA00180E00013AAFA90014A38000088A
-:1065C0008FBF002003E0000827BD00288D1F004872
-:1065D0003C1808008F183BD48F9900143C027FFFB1
-:1065E0008D0800443443FFFFAFA900103C0B800826
-:1065F0008D69006C03E370240319782101CF6823AF
-:1066000001A83821AFAA00180E00013AAFA9001462
-:106610000A000DA5A38000083C05800034A60A00EE
-:1066200090C7003C3C06080094C63BF23C020800C0
-:106630008C423BEC30E30020000624001060003167
-:10664000004448253C0880083505008090A3006878
-:1066500000006821240C000100005021240B0001DF
-:106660003C188000370F00708DE800003C07800068
-:10667000AF8800248CF901780720FFFE34E5007014
-:106680008CA200003C0308008C6300743C0F0800DF
-:106690008DEF007000482023006428210000C021F5
-:1066A00000A4302B01F8702101C640213C010800F4
-:1066B000AC2500743C010800AC280070ACEC01482B
-:1066C0003C0208008C423BF4A4EA0144A4EB0146DE
-:1066D000ACE2014C3C04080090843BF13C03800890
-:1066E000A0E40152ACE90154A4ED0158346D0080DE
-:1066F00091AC004C3C091000A0EC016D03E00008D7
-:10670000ACE901788CAC0E1C3C0B08008D6B3BD4C3
-:1067100094AA0E1694AE0E1401666821314BFFFF49
-:106720000A000DCD31CAFFFF3C04800034830A000B
-:106730009065003C30A200201040002B00000000BB
-:106740000000582100005021000048213C08800032
-:10675000350400708C8800003C078000AF8800245E
-:106760008CEC01780580FFFE34EE00708DCD0000CA
-:106770003C0508008CA500743C0408008C84007063
-:1067800001A8602300ACC02100001021030C302BB5
-:106790000082C821032678213C010800AC3800742F
-:1067A0003C010800AC2F0070ACEB01483C0E080027
-:1067B0008DCE3BF4240DFF91240B0040A4E901444D
-:1067C000A4EA0146ACEE014CA0ED0152ACEB015441
-:1067D000A4E0015890EA01093C091000A0EA016D0B
-:1067E00003E00008ACE901788C8B0E1894870E1238
-:1067F00094860E1030EAFFFF0A000E0830C9FFFF32
-:106800003C04800034830A009065003C30A20020E4
-:106810001040003927BDFFF8240C00010000502172
-:10682000240B00013C088000350400708C890000B6
-:106830003C088000AF8900248D0D017805A0FFFE83
-:10684000350E00708DC700003C0508008CA5007453
-:106850003C0408008C84007000E9682300ADC0216E
-:1068600000001021030D302B0082C821032678215F
-:106870003C010800AC3800743C010800AC2F0070EB
-:10688000910901093C0E080091CE3C313C0380FF88
-:10689000A3A900038FAD000031C7007F3462FFFF62
-:1068A00001A82025AFA400009106010AA3A00002C0
-:1068B0000007CE00A3A600018FA50000240E300023
-:1068C0003C09100000A2C02403197825AD0F014C2B
-:1068D00027BD0008AD0E0154A5000158AD0C0148BC
-:1068E000A50A0144240AFF80A50B0146A10A015212
-:1068F00003E00008AD0901788C8C0E1894870E1205
-:1069000094860E1030EBFFFF0A000E3E30CAFFFFE8
-:1069100027BDFFE8AFB000103C108000AFBF0014EF
-:1069200036180A00970F00320E000AD531E43FFFF7
-:106930008E0E0100240DFF803C04200001C258216E
-:10694000016D6024000C4940316A007F012A402516
-:10695000010438253C048008AE07083034860080E6
-:1069600090C500682403000230A200FF1043000419
-:106970008F9F000C8F990010AC9F0068AC99006449
-:106980008FBF00148FB0001003E0000827BD00186F
-:106990003C0A0800254A37FC3C090800252938D460
-:1069A0003C08080025082C743C07080024E739E45B
-:1069B0003C06080024C636383C05080024A5339060
-:1069C0003C04080024842FA03C030800246336EC18
-:1069D0003C020800244234883C010800AC2A3DFCFB
-:1069E0003C010800AC293DF83C010800AC283DF40E
-:1069F0003C010800AC273E003C010800AC263E10DC
-:106A00003C010800AC253E083C010800AC243E04D3
-:106A10003C010800AC233E143C010800AC223E0CB3
-:086A200003E000080000000083
-:086A2800800009408000090014
-:106A3000800801008008008080080000800E0000AF
-:106A4000800800808008000080000A8080000A0022
-:086A50008000098080000900AC
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex
new file mode 100644
index 0000000..92e2204
--- /dev/null
+++ b/firmware/bnx2/bnx2-mips-09-5.0.0.j3.fw.ihex
@@ -0,0 +1,6051 @@
+:100000000800011008000000000051C4000000C8F2
+:10001000000000000000000000000000080051C4C3
+:10002000000000380000528C080000880800000022
+:10003000000051B4000052C4080053A00000008426
+:100040000000A478080051B4000001C00000A4FC26
+:10005000080031D808000000000080E40000A6BCC1
+:10006000000000000000000000000000080080E424
+:1000700000000124000127A00800048808000400F3
+:10008000000017EC000128C4000000000000000080
+:100090000000000008001BEC00000004000140B05C
+:1000A000080000A80800000000003814000140B457
+:1000B00000000000000000000000000008003814EC
+:0800C00000000030000178C8C7
+:0800C8000A00004400000000E2
+:1000D000000000000000000D636F6D352E302E30E3
+:1000E0006A33000005000002000000000000000369
+:1000F00000000014000000320000000300000000B7
+:1001000000000000000000000000000000000000EF
+:1001100000000010000001360000EA600000000549
+:1001200000000000000000000000000000000008C7
+:1001300000000000000000000000000000000000BF
+:1001400000000000000000000000000000000000AF
+:10015000000000000000000000000000000000009F
+:10016000000000020000000000000000000000008D
+:10017000000000000000000000000000000000007F
+:10018000000000000000000000000010000000005F
+:10019000000000000000000000000000000000005F
+:1001A000000000000000000000000000000000004F
+:1001B000000000000000000000000000000000003F
+:1001C000000000000000000000000000000000002F
+:1001D000000000000000000000000000100000030C
+:1001E000000000000000000D0000000D3C020800AF
+:1001F000244252203C03080024635354AC400000C6
+:100200000043202B1480FFFD244200043C1D080005
+:1002100037BD9FFC03A0F0213C1008002610011000
+:100220003C1C0800279C52200E00025F00000000CA
+:100230000000000D27BDFFE0AFBF0018AFB10014F4
+:10024000AFB000103C04800094820108304370007D
+:10025000240220001062000B2862200114400036A6
+:1002600000001021240240001062002C0000000059
+:10027000240260001062002D000010210A00009D81
+:100280008FBF001834910100922400098E300018AD
+:1002900010800020240300012402000914820006BB
+:1002A0008F82001C3C0280089442001A0002140055
+:1002B000020280258F82001C8C42000C1040001529
+:1002C000000018210E000D45000000008F83001C67
+:1002D000962400088F8200189463001E9625000C57
+:1002E0000004240000832025AC500000AC4500042D
+:1002F000AC400008AC40000CAC400010AC40001416
+:10030000AC400018AC44001C0E000D792404000120
+:10031000000018210A00009C006010210E00042E2D
+:10032000000000000A00009C000010210E000C6577
+:1003300000000000000010218FBF00188FB10014D2
+:100340008FB0001003E0000827BD00208F82001C42
+:1003500027BDFFE0AFB00010AFBF0018AFB1001471
+:100360008C42000C3C1080008E11010010400034C3
+:100370008FBF00180E000D45000000008F8500188B
+:1003800024047FFF0091202BACB100008E030104F8
+:100390009602010800031C003042FFFF006218258E
+:1003A000ACA300049202010A96030114304200FF3C
+:1003B0003063FFFF0002140000431025ACA20008C8
+:1003C0009603010C9602010E00031C003042FFFF51
+:1003D00000621825ACA3000C9603011096020112CE
+:1003E00000031C003042FFFF00621825ACA3001080
+:1003F0008E020118ACA200148E02011CACA20018DF
+:10040000148000088F82001C978200003C042005A5
+:100410000044182524420001ACA3001C0A0000DBA4
+:10042000A78200003C0340189442001E00431025A0
+:10043000ACA2001C0E000D79240400018FBF00182F
+:100440008FB100148FB000100000102103E00008ED
+:1004500027BD00203C0680008CC202B824030001A6
+:1004600004410008008028213C0208008C42006002
+:10047000244200013C010800AC22006003E00008B7
+:10048000006010218C83002094820016ACC302808F
+:100490002442FFFCA4C202843C0208008C42005C9F
+:1004A0008C84000494A3000E244200013C01080047
+:1004B000AC22005C3C021000A4C30286ACC40288DB
+:1004C00000001821ACC202B803E00008006010214F
+:1004D00027BDFFE0AFB000103C108000AFB20018A5
+:1004E000AFBF001CAFB10014361201009243000BE5
+:1004F0002402001A965100081462005A00002821B4
+:1005000032220001104000188F82001C8E42000031
+:10051000000223403C02003F3442FFFF0044102B06
+:10052000104000043C030040964200140A000124DD
+:10053000008320218E030100240201005462000682
+:10054000964200143C028008904200043042000FA2
+:10055000000225009642001400821025AE020080A1
+:100560000A000157000000008C42000C10400028D7
+:10057000000000000E000D4500000000960201087A
+:100580009603010C8F8500183042003E3063FFFF58
+:100590000002140000431025ACA200008E020100EE
+:1005A000ACA20004960301169604010E8F82001C73
+:1005B00000031C003084FFFF00641825ACA3000872
+:1005C00096030110960401129446001E00031C00BD
+:1005D0003084FFFF00641825ACA3000C3C0220000F
+:1005E00000C2302596020114240400013042FFFFAE
+:1005F000ACA200108E020118ACA200149202010BF2
+:10060000304200FFACA200180E000D79ACA6001C11
+:100610003C0208008C420040244200013C010800DA
+:10062000AC2200403C0308008C63004432220002EC
+:1006300032240004246300013C010800AC23004480
+:10064000108000080002282B024020218FBF001CD0
+:100650008FB200188FB100148FB000100A0000E3B1
+:1006600027BD00208FBF001C8FB200188FB100146F
+:100670008FB0001000A0102103E0000827BD00206B
+:1006800027BDFFE0AFB000103C108000AFB20018F3
+:10069000AFBF001CAFB10014361201009243000B33
+:1006A000240200031462006A9651000832220001FD
+:1006B000104000178F82001C8E4300003C02003F58
+:1006C0003442FFFF000323400044102B504000053C
+:1006D00024020100964200143C0300400A00018EEF
+:1006E0000083202154620006964200143C028008D8
+:1006F000904200043042000F000225009642001490
+:1007000000821025AE0200800A0001BE0000000039
+:100710008C42000C10400025000000000E000D452A
+:1007200000000000960201089603010C8F85001856
+:100730003042003E3063FFFF0002140000431025EA
+:10074000ACA200008E020100ACA2000496030116C8
+:100750009604010E8F82001C00031C003084FFFFF2
+:1007600000641825ACA3000896030110960401123A
+:100770009446001E00031C003084FFFF006418250F
+:10078000ACA3000C3C02200000C2302596020114EC
+:10079000240400013042FFFFACA20010ACA0001402
+:1007A000ACA000180E000D79ACA6001C3C0208009D
+:1007B0008C420040244200013C010800AC22004071
+:1007C0003C0208008C420044322300042442000111
+:1007D0003C010800AC2200441060000832220002F4
+:1007E000024020218FBF001C8FB200188FB100146F
+:1007F0008FB000100A0000E327BD00201040001554
+:100800008FBF001C3C0480008C8301043C026020EC
+:10081000AC4300148C420004240301FE304203FF69
+:100820001443000C8FBF001C8C820100000219C20F
+:100830002462FFFC2C420008104000032404000244
+:100840002462FFFD004420043C026000AC446914B3
+:100850008FBF001C8FB200188FB100148FB0001032
+:100860000000102103E0000827BD00203C048000A8
+:100870008C83010024020100506200033C028008C6
+:100880000000000D3C02800890430004000010218D
+:100890003063000F00031D0003E00008AC830080FC
+:1008A0002C8407811080000A000028213C0280006F
+:1008B00094420108240320003042700014430005D4
+:1008C0002783FFB03C02800890420005304500FFBE
+:1008D0002783FFB00005208000832021000510C081
+:1008E000004510238C8400003C030800246352E47C
+:1008F000000210C0004310213C038000AC64009053
+:1009000003E00008AF82001C03E000080000102193
+:1009100003E00008000010212402010014820008F6
+:10092000000000003C0208008C4200FC2442000150
+:100930003C010800AC2200FC0A00022430A2002086
+:100940003C0208008C420084244200013C01080063
+:10095000AC22008430A200201040000830A3001018
+:100960003C0208008C420108244200013C010800BE
+:10097000AC22010803E0000800000000106000083D
+:10098000000000003C0208008C42010424420001E7
+:100990003C010800AC22010403E000080000000054
+:1009A0003C0208008C420100244200013C01080086
+:1009B000AC22010003E000080000000027BDFFE8B2
+:1009C000AFB000103C108000AFBF0014360401002F
+:1009D0009483000830620004104000053066000275
+:1009E0008FBF00148FB000100A0000E327BD00186D
+:1009F00010C00006006028218E0401000E000214C1
+:100A0000000000000A00025B240200018F8200083F
+:100A10008E03010410430007000010218E04010022
+:100A20000E000214000000008E020104AF820008D4
+:100A3000000010218FBF00148FB0001003E00008E9
+:100A400027BD001827BDFFD83C036010AFB3001CC2
+:100A5000AFBF0020AFB20018AFB10014AFB00010AC
+:100A60008C6450002402FF7F3C1308002673524818
+:100A7000008220243484380CAC6450003C02800096
+:100A800024030037AC4300083C06080024C6084095
+:100A9000026010212404001C2484FFFFAC460000E7
+:100AA0000481FFFD244200043C0208002442016C42
+:100AB0003C010800AC2252503C020800244205B818
+:100AC0003C010800AC2252543C020800244202843B
+:100AD0003C010800AC2252903C0208002442040869
+:100AE0003C030800246308483C040800248408F4FC
+:100AF0003C05080024A52C4C3C010800AC2252B057
+:100B00003C020800244207A43C010800AC2652988D
+:100B10003C010800AC2552A43C010800AC2352ACB7
+:100B20003C010800AC2452B43C010800AC2252B88D
+:100B30003C010800AC23524C3C010800AC20525848
+:100B40003C010800AC20525C3C010800AC20526023
+:100B50003C010800AC2052643C010800AC20526803
+:100B60003C010800AC20526C3C010800AC205270E3
+:100B70003C010800AC2452743C010800AC205278BF
+:100B80003C010800AC20527C3C010800AC205280A3
+:100B90003C010800AC2052843C010800AC20528883
+:100BA0003C010800AC26528C3C010800AC26529453
+:100BB0003C010800AC20529C3C010800AC2552A02E
+:100BC0003C010800AC2352A80E00055A00000000AA
+:100BD0008F8300043C0208008C4200201062001F3A
+:100BE000000088212792FFB03C100800261052E434
+:100BF0003C0208008C420020240500010225180454
+:100C0000004320248F820004004310245044000C31
+:100C10002631000110800008AF90001C8E430000B8
+:100C20003C028000AC4300900E000D0CAE05000CA1
+:100C30000A0002DE26310001AE00000C2631000160
+:100C40002E220002261000381440FFE9265200042C
+:100C50003C0208008C420020AF8200043C1080005F
+:100C60008E110000322200071040FFDA8F8300044B
+:100C70003222000110400021322200028E020100C7
+:100C8000AE0200208E020104AE0200A80E0001F6A2
+:100C90008E0401009202010B304300FF2C62001D04
+:100CA00054400004000310800E0002100A0002FFEE
+:100CB00000000000005310218C4200000040F809A1
+:100CC00000000000104000043C0280008C4301043E
+:100CD0003C026020AC4300143C0208008C4200340B
+:100CE0003C0440003C03800024420001AC64013815
+:100CF0003C010800AC2200343222000210400010F7
+:100D0000322200043C1080008E020140AE0200201E
+:100D10000E0001F68E0401400E0003970000000053
+:100D20003C024000AE0201783C0208008C420038D0
+:100D3000244200013C010800AC22003832220004A9
+:100D40001040FFA48F8300043C1080008E020180BD
+:100D5000AE0200200E0001F68E0401808E03018099
+:100D600024020F00146200073C0280088E020188F2
+:100D70003C0300E03042FFFF004310250A00033B24
+:100D8000AE020080344200809042000024030050F4
+:100D9000304200FF14430007000000000E000374FF
+:100DA0000000000014400003000000000E00095D78
+:100DB000000000003C0208008C42003C3C04400063
+:100DC0003C03800024420001AC6401B83C010800EF
+:100DD000AC22003C0A0002C38F8300043C02900056
+:100DE00034420001008220253C028000AC440020F7
+:100DF0003C0380008C6200200440FFFE00000000E5
+:100E000003E00008000000003C02800034430001C1
+:100E10000083202503E00008AC44002027BDFFE04C
+:100E2000AFB10014AFB0001000808821AFBF001830
+:100E30000E00034530B000FF8F83FFA80220202161
+:100E40009062002502028025A07000258C70001899
+:100E50003C0280000E000350020280241600000AAB
+:100E60008FBF00183C0380008C6201F80440FFFE35
+:100E700024020002AC7101C0A06201C43C02100057
+:100E8000AC6201F88FBF00188FB100148FB0001052
+:100E900003E0000827BD002027BDFFE8AFBF00101A
+:100EA0003C0380009462018430420200104000053F
+:100EB000000020210E000FCD000000000A00038A70
+:100EC000240400018C6201880440000A8FBF0010D6
+:100ED0008C6201883C03FF00004310243C030400A3
+:100EE00014430004240400018F82FFA890420008EC
+:100EF0008FBF00100080102103E0000827BD0018FC
+:100F00008F82FFAC2403000124050001A040001AD9
+:100F10008F82FFA8A44300163C0280000A000355FC
+:100F20008C4401408F85FFA827BDFFE0AFBF001CA8
+:100F3000AFB20018AFB10014AFB0001090A2000023
+:100F4000304400FF38830020388200300003182B23
+:100F50000002102B00621824106000053C02800083
+:100F600024020050148200818FBF001C3C028000CC
+:100F700090420148304200FF2443FFFF2C620005ED
+:100F80001040007A8FBF001C000310803C03080053
+:100F9000246351DC004310218C4200000040000813
+:100FA000000000003C1180008E2401400E0003452B
+:100FB0008F92FFA88E50000C8E2201441602000270
+:100FC00024020001AE42000C0E0003508E240140AA
+:100FD0008E220144145000068FBF001C8FB20018EF
+:100FE0008FB100148FB000100A000F3927BD002008
+:100FF0008E42000C0A0004220000000094A200109F
+:101000003C0480008C8301443042FFFF14620009DD
+:101010000000000024020001A4A200108C82014004
+:10102000AC8202003C021000AC8202380A000429A3
+:101030008FBF001C94A200100A00042200000000D0
+:10104000240200201482000E3C11800094A20012A1
+:101050003C0380008C6301443042FFFF14620005B2
+:101060000000000024020001A4A200120A0003FCF8
+:101070008FBF001C94A200120A000422000000008E
+:101080008E2401400E0003458F92FFA89642001265
+:101090008E2301443050FFFF16030002240200019A
+:1010A000A64200120E0003508E2401408E220144FD
+:1010B000160200068FBF001C8FB200188FB10014FB
+:1010C0008FB000100A00038E27BD00209642001248
+:1010D0000A0004220000000094A200143C038000D7
+:1010E0008C6301443042FFFF146200088FBF001C74
+:1010F000240200018FB200188FB100148FB00010CD
+:10110000A4A200140A00142427BD002094A20014F5
+:101110000A0004220000000094A200163C03800094
+:101120008C6301443042FFFF146200082402000176
+:101130008FBF001C8FB200188FB100148FB0001049
+:10114000A4A200160A000B0027BD002094A20016DE
+:10115000144000068FBF001C3C0208008C42007047
+:10116000244200013C010800AC2200708FB200183C
+:101170008FB100148FB0001003E0000827BD0020DD
+:1011800027BDFFD8AFB200188F92FFA8AFB10014EF
+:10119000AFBF0020AFB3001CAFB000103C02800016
+:1011A000345101008C50010092420000922300094A
+:1011B000304400FF2402001F106200AB28620020B0
+:1011C00010400019240200382862000A1040000D67
+:1011D0002402000B286200081040002E8F82001CA1
+:1011E00004600103286200021440002A8F82001C60
+:1011F00024020006106200268FBF00200A00054C62
+:101200008FB3001C106200602862000B144000F9CC
+:101210008FBF00202402000E106200788F82001C15
+:101220000A00054C8FB3001C106200D128620039FF
+:101230001040000A2402008024020036106200E4FC
+:1012400028620037104000C224020035106200D826
+:101250008FBF00200A00054C8FB3001C1062002DC8
+:101260002862008110400006240200C824020039D0
+:10127000106200C88FBF00200A00054C8FB3001C0D
+:10128000106200A28FBF00200A00054C8FB3001C23
+:101290008F82001C8C42000C104000D68FBF0020B3
+:1012A0000E000D45000000003C0380003463010087
+:1012B0008C6200008F850018946700089466000C0B
+:1012C000ACA200008C6400048F82001C0006340075
+:1012D000ACA400049448001E8C62001800073C0077
+:1012E00000E83825ACA200088C62001C2404000130
+:1012F000ACA2000C9062000A00C23025ACA600101F
+:10130000ACA00014ACA00018ACA7001C0A00050B90
+:101310008FBF00208F82001C8C42000C104000B553
+:101320008FBF00200E000D45000000008F82001CC2
+:10133000962400089625000C9443001E0004220207
+:101340009626000E8F8200180004260000832025B8
+:1013500000052C003C03008000A6282500832025E2
+:10136000AC400000AC400004AC400008AC40000CB5
+:10137000AC450010AC400014AC400018AC44001C5C
+:101380000A00050A240400019622000C14400018EB
+:10139000000000009242000530420010144000148A
+:1013A000000000000E0003450200202192420005CB
+:1013B00002002021344200100E000350A24200051A
+:1013C0009242000024030020304200FF10430088B6
+:1013D000020020218FBF00208FB3001C8FB20018A5
+:1013E0008FB100148FB000100A00103627BD0028FE
+:1013F0000000000D0A00054B8FBF00208C42000C3E
+:101400001040007C8FBF00200E000D450000000042
+:101410008E2200048F8400189623000CAC820000FA
+:101420003C0280089445002C8F82001C00031C00A5
+:1014300030A5FFFF9446001E3C02400E00651825B3
+:1014400000C23025AC830004AC800008AC80000CE6
+:10145000AC800010AC800014AC800018AC86001C7E
+:101460000A00050A240400010E00034502002021A1
+:101470008F93FFAC020020210E000350A660000CE9
+:10148000020020210E000355240500018F82001C5C
+:101490008C42000C104000578FBF00200E000D45FD
+:1014A000000000009622000C8F8300180002140038
+:1014B000AC700000AC620004AC6000088E440038E0
+:1014C0008F82001CAC64000C8E46003C9445001ECC
+:1014D0003C02401FAC66001000A228258E6200046A
+:1014E00024040001AC620014AC600018AC65001C60
+:1014F0008FBF00208FB3001C8FB200188FB1001473
+:101500008FB000100A000D7927BD002824020020AA
+:10151000108200398FB3001C0E000F1F0000000066
+:10152000104000348FBF00203C0380008C6201F823
+:101530000440FFFE24020002AC7001C0A06201C49E
+:101540003C021000AC6201F80A00054B8FBF00207E
+:10155000020020218FBF00208FB3001C8FB2001823
+:101560008FB100148FB000100A000E6827BD00284C
+:101570009625000C020020218FBF00208FB3001C95
+:101580008FB200188FB100148FB000100A000E8DBA
+:1015900027BD0028020020218FB3001C8FB2001845
+:1015A0008FB100148FB000100A000EB827BD0028BC
+:1015B0009225000D020020218FB3001C8FB200186D
+:1015C0008FB100148FB000100A000F0927BD00284A
+:1015D000020020218FBF00208FB3001C8FB20018A3
+:1015E0008FB100148FB000100A000EE027BD002854
+:1015F0008FBF00208FB3001C8FB200188FB1001472
+:101600008FB0001003E0000827BD00283C038000D5
+:101610008C6202780440FFFE24020002AC640240A7
+:10162000A06202443C02100003E00008AC620278B1
+:10163000A380001003E00008A38000113C03800099
+:101640008C6202780440FFFE8F820014AC6202407C
+:1016500024020002A06202443C02100003E00008E1
+:10166000AC6202783C02600003E000088C42540443
+:101670009083003024020005008040213063003F49
+:101680000000482114620005000050219082004CA7
+:101690009483004E304900FF306AFFFFAD00000C1C
+:1016A000AD000010AD000024950200148D05001C53
+:1016B0008D0400183042FFFF004910230002110082
+:1016C000000237C3004038210086202300A2102BDF
+:1016D0000082202300A72823AD05001CAD040018BC
+:1016E000A5090014A5090020A50A001603E00008BA
+:1016F000A50A002203E000080000000027BDFFD873
+:10170000AFB200183C128008AFB40020AFB3001C89
+:10171000AFB10014AFBF0024AFB0001036510100CC
+:101720003C0260008C4254049222000C3C140800DD
+:10173000929400F7304300FF24020001106200324F
+:101740000080982124020002146200353650008087
+:101750000E0013FE000000009202004C2403FF80E4
+:101760003C0480003042007F000211C0244202404D
+:101770000262102100431824AC83009492450008B3
+:101780009204004C3042007F3C0380061485000721
+:10179000004380212402FFFFA22200112402FFFF48
+:1017A000A62200120A0005BE2402FFFF96020020B6
+:1017B000A222001196020022A62200128E0200240C
+:1017C0003C048008AE2200143485008090A2004CB6
+:1017D00034830100A06200108CA2003CAC620018AF
+:1017E0008C820068AC6200E48C820064AC6200E031
+:1017F0008C82006CAC6200E824020001A0A20068A8
+:101800000A0005DA3C0480080E00141700000000EE
+:1018100036420080A04000680A0005DA3C048008D7
+:10182000A2000068A20000690A0006153C028008B8
+:10183000348300808C62003834850100AC62006C17
+:1018400024020001A062006990A200C590830008F4
+:10185000305100FF3072007F12320019001111C0A8
+:1018600024420240026210212403FF800043182416
+:101870003C048000AC8300943042007F3C0380062F
+:10188000004380218E02000C1040000D0200202138
+:101890000E00056A0000000026220001305100FF02
+:1018A0009203003C023410260002102B0002102389
+:1018B0003063007F022288240A0005E4A203003C72
+:1018C0003C088008350401008C8200D03507008078
+:1018D000ACE2003C8C8200D0AD02000090E5004CF0
+:1018E000908600C590E3004C908400C52402FF80E0
+:1018F00000A228243063007F308400FF00A6282542
+:101900000064182A1060000230A500FF38A500808E
+:10191000A0E5004CA10500093C0280089043000EA0
+:10192000344400803C058000A043000A8C830018EA
+:101930003C027FFF3442FFFF00621824AC83001892
+:101940008CA201F80440FFFE00000000ACB301C00F
+:101950008FBF00248FB400208FB3001C8FB20018FB
+:101960008FB100148FB0001024020002A0A201C4A5
+:1019700027BD00283C02100003E00008ACA201F8DB
+:1019800090A2000024420001A0A200003C03080035
+:101990008C6300F4304200FF1443000200803021C9
+:1019A000A0A0000090A200008F840014000211C0CB
+:1019B0002442024024830040008220212402FF8030
+:1019C000008220243063007F3C02800A00621821DC
+:1019D0003C028000AC44002403E00008ACC30000DB
+:1019E00094820006908300058C85000C8C86001084
+:1019F0008C8700188C88001C8C8400203C01080017
+:101A0000A42252C63C010800A02352C53C01080094
+:101A1000AC2552CC3C010800AC2652D03C01080059
+:101A2000AC2752D83C010800AC2852DC3C0108002D
+:101A3000AC2452E003E00008000000003C028008F3
+:101A4000344201008C4400343C03800034650400BF
+:101A5000AC6400388C420038AF850020AC62003C9A
+:101A60003C020005AC6200300000000000000000F5
+:101A700003E00008000000003C020006308400FF84
+:101A8000008220253C028000AC44003000000000B1
+:101A900000000000000000003C0380008C62000099
+:101AA000304200101040FFFD3462040003E00008E3
+:101AB000AF82002094C200003C080800950800CACC
+:101AC00030E7FFFF0080482101021021A4C200007E
+:101AD00094C200003042FFFF00E2102B544000018E
+:101AE000A4C7000094A200003C0308008C6300CC53
+:101AF00024420001A4A2000094A200003042FFFF93
+:101B0000144300073C0280080107102BA4A000002A
+:101B10005440000101003821A4C700003C028008A5
+:101B2000344601008CC3002894A200003C048000CD
+:101B30003042FFFE000210C000621021AC82003C67
+:101B40008C82003C00621823186000040000000032
+:101B50008CC200240A0006A6244200018CC2002484
+:101B6000AC8200383C020050344200103C0380003C
+:101B7000AC62003000000000000000000000000027
+:101B80008C620000304200201040FFFD0000000089
+:101B900094A200003C04800030420001000210C00A
+:101BA000004410218C430400AD2300008C42040447
+:101BB000AD2200043C02002003E00008AC820030AB
+:101BC00027BDFFE0AFB20018AFB10014AFB00010F6
+:101BD000AFBF001C94C2000000C080213C1208006E
+:101BE000965200C624420001A6020000960300009F
+:101BF00094E2000000E03021144300058FB1003072
+:101C00000E00067B024038210A0006DD00000000BD
+:101C10008C8300048C82000424420040046100078D
+:101C2000AC8200048C820004044000040000000028
+:101C30008C82000024420001AC8200009602000069
+:101C40003042FFFF50520001A60000009622000023
+:101C500024420001A62200003C0280083442010018
+:101C6000962300009442003C144300048FBF001CE4
+:101C700024020001A62200008FBF001C8FB20018B2
+:101C80008FB100148FB0001003E0000827BD0020C2
+:101C900027BDFFE03C028008AFBF001834420100BE
+:101CA0008C4800343C03800034690400AC68003880
+:101CB0008C42003830E700FFAF890020AC62003C66
+:101CC0003C020005AC620030000000000000000093
+:101CD0000000000000000000000000000000000004
+:101CE0008C82000C8C82000C9783000EAD220000C9
+:101CF0008C82001000604021AD2200048C8200180C
+:101D0000AD2200088C82001CAD22000C8CA20014B5
+:101D1000AD2200108C820020AD22001490820005BC
+:101D2000304200FF00021200AD2200188CA2001801
+:101D3000AD22001C8CA2000CAD2200208CA2001051
+:101D4000AD2200248CA2001CAD2200288CA2002011
+:101D5000AD22002C3402FFFFAD260030AD20003450
+:101D6000506200013408FFFFAD28003850E0001138
+:101D70003C0280083C0480083484010094820050B6
+:101D80003042FFFFAD22003C948300449485004420
+:101D9000240200013063FFFF000318C20064182111
+:101DA0009064005430A5000700A210040A00074800
+:101DB0000044102534420100AD20003C944300440F
+:101DC000944400443063FFFF000318C200621821EE
+:101DD0003084000790650054240200010082100442
+:101DE0000002102700451024A062005400000000EB
+:101DF00000000000000000003C02000634420040E9
+:101E00003C038000AC6200300000000000000000D5
+:101E1000000000008C620000304200101040FFFD06
+:101E20003C06800834C201503463040034C7014AC0
+:101E300034C4013434C5014034C60144AFA200109B
+:101E40000E0006BEAF8300208FBF001803E000081D
+:101E500027BD00208F83000C3C0608008CC600E8DC
+:101E60008F82001430633FFF000319800046102169
+:101E7000004310212403FF80004318243C06800007
+:101E8000ACC300283042007F3C03800C004330216B
+:101E900090C2000D30A500FF000038213442001030
+:101EA000A0C2000D8F89000C3C0280083442010062
+:101EB00094430044000913823048000324020001C7
+:101EC000A4C3000E1102000B2902000210400005FD
+:101ED000240200021100000C240300010A000790F4
+:101EE0000000182111020006000000000A000790FF
+:101EF000000018218CC2002C0A0007902443000126
+:101F00008CC20014244300018CC200180043102B23
+:101F10005040000A240700012402002714A20003F5
+:101F20003C0380080A00079D240700013463010078
+:101F30009462004C24420001A462004C0009138208
+:101F4000304300032C620002104000090080282169
+:101F5000146000040000000094C200340A0007ADC1
+:101F60003046FFFF8CC600380A0007AD00802821EC
+:101F7000000030213C040800248452C00A0006F20C
+:101F80000000000027BDFF90AFB60068AFB5006449
+:101F9000AFB40060AFB3005CAFB20058AFB1005453
+:101FA000AFBF006CAFB000508C9000000080B0213B
+:101FB0003C0208008C4200E8960400328F83001433
+:101FC0002414FF8030843FFF006218210004218028
+:101FD00000641821007410243C13800000A090219C
+:101FE00090A50000AE620028920400323C02800CF2
+:101FF0003063007F00628821308400C024020040EA
+:10200000148200320000A8218E3500388E2200187C
+:102010001440000224020001AE2200189202003C8B
+:10202000304200201440000E8F830014000511C0C0
+:102030002442024000621821306400783C02008093
+:102040000082202500741824AE630800AE640810D6
+:102050008E2200188E03000800431021AE220018C3
+:102060008E22002C8E230018244200010062182BBF
+:102070001060004300000000924200002442000172
+:10208000A24200003C0308008C6300F4304200FFD1
+:1020900050430001A2400000924200008F840014CF
+:1020A000000211C024420240248300403063007FBC
+:1020B000008220213C02800A009420240062182122
+:1020C000AE6400240A0008BEAEC3000092030032D2
+:1020D0002402FFC000431024304200FF14400005DA
+:1020E00024020001AE220018962200340A00082EB5
+:1020F0003055FFFF8E22001424420001AE2200184A
+:102100009202003000021600000216030441001C77
+:10211000000000009602003227A400100080282151
+:10212000A7A2001696020032000030212407000109
+:102130003042FFFFAF82000C0E0006F2AFA0001C81
+:10214000960200328F8300143C0408008C8400E85F
+:1021500030423FFF00021180006418210062182104
+:1021600000741024AE62002C3063007F3C02800EAD
+:10217000006218219062000D3042007FA062000DC5
+:102180009222000D30420010504000789242000030
+:102190003C028008344401009482004C8EC300004D
+:1021A0003C130800967300C62442FFFFA482004C33
+:1021B000946200329623000E3054FFFF3070FFFF10
+:1021C0003C0308008C6300D000701807A7A30038F8
+:1021D0009482003E3063FFFF3042FFFF146200072D
+:1021E000000000008C8200303C038000244200305C
+:1021F000AC62003C0A0008568C82002C948200409D
+:102200003042FFFF5462000927A400408C8200384E
+:102210003C03800024420030AC62003C8C820034DD
+:10222000AC6200380A0008653C03800027A500382E
+:1022300027A60048026038210E00067BA7A00048B0
+:102240008FA300403C02800024630030AC43003880
+:102250008FA30044AC43003C3C0380003C020005DB
+:10226000AC6200303C028008344401009482004299
+:10227000346304003042FFFF0202102B14400007B9
+:10228000AF8300209482004E94830042020210210A
+:10229000004310230A00087B3043FFFF9483004E65
+:1022A0009482004202631821005010230062182318
+:1022B0003063FFFF3C028008344401009482003CFC
+:1022C0003042FFFF14430003000000000A00088BA7
+:1022D000240300019482003C3042FFFF0062102B77
+:1022E000144000058F8200209482003C006210237D
+:1022F0003043FFFF8F820020AC550000AC4000044B
+:10230000AC540008AC43000C3C0200063442001000
+:102310003C038000AC6200300000000000000000C0
+:10232000000000008C620000304200101040FFFDF1
+:102330003C04800834840100001018C20064182195
+:102340009065005432020007240600010046100484
+:1023500000451025A0620054948300429622000E8E
+:1023600050430001A3860010924200002442000165
+:10237000A24200003C0308008C6300F4304200FFDE
+:1023800050430001A2400000924200008F840014DC
+:10239000000211C024420240248300400082202118
+:1023A0002402FF80008220243063007F3C02800AE8
+:1023B000006218213C028000AC440024AEC300003F
+:1023C0008FBF006C8FB600688FB500648FB400605B
+:1023D0008FB3005C8FB200588FB100548FB00050A3
+:1023E00003E0000827BD007027BDFFD8AFB3001C75
+:1023F000AFB20018AFB10014AFB00010AFBF0020F3
+:102400000080982100E0802130B1FFFF0E000D45D3
+:1024100030D200FF000000000000000000000000BB
+:102420008F8200188F83001CAC510000AC52000456
+:10243000AC530008AC40000CAC400010AC400014A1
+:10244000AC4000189463001E02038025AC50001CB1
+:102450000000000000000000000000002404000153
+:102460008FBF00208FB3001C8FB200188FB10014F3
+:102470008FB000100A000D7927BD002830A5FFFF9E
+:102480000A0008C830C600FF3C028008344301003F
+:102490009462000E3C080800950800C63046FFFF15
+:1024A00014C000043402FFFF946500DA0A00091525
+:1024B0008F84001410C20027000000009462004EB8
+:1024C0009464003C3045FFFF00A6102300A6182BA3
+:1024D0003087FFFF106000043044FFFF00C5102369
+:1024E00000E210233044FFFF0088102B1040000E44
+:1024F00000E810233C02800834440100240300015A
+:1025000034420080A44300162402FFFFA482000E80
+:10251000948500DA8F8400140000302130A5FFFF7D
+:102520000A0008ED3C0760200044102A1040000912
+:102530003C0280083443008094620016304200015F
+:10254000104000043C0280009442007E24420014AB
+:10255000A462001603E000080000000027BDFFE0B1
+:102560003C028008AFBF001CAFB00018344201002D
+:10257000944300429442004C104000193068FFFF21
+:102580009383001024020001146200298FBF001CF5
+:102590003C06800834D00100000810C20050102111
+:1025A000904200543103000734C70148304200FF15
+:1025B000006210073042000134C9014E34C4012CBE
+:1025C00034C5013E1040001634C601420E0006BE5E
+:1025D000AFA90010960200420A0009323048FFFFFE
+:1025E0003C028008344401009483004494820042F9
+:1025F0001043000F8FBF001C94820044A48200424D
+:1026000094820050A482004E8C820038AC8200304C
+:1026100094820040A482003E9482004AA482004832
+:102620008FBF001C8FB000180A0008F027BD0020E3
+:102630008FB0001803E0000827BD002027BDFFA0D1
+:10264000AFB1004C3C118000AFBF0058AFB3005495
+:10265000AFB20050AFB000483626018890C20003E8
+:102660003044007FA3A400108E32018090C200008D
+:102670003043007F240200031062003BAF9200143D
+:102680002862000410400006240200042402000214
+:10269000106200098FBF00580A000AFB8FB3005474
+:1026A0001062004D240200051062014E8FBF0058D9
+:1026B0000A000AFB8FB30054000411C0024210212B
+:1026C0002404FF802442024000441024264300409A
+:1026D000AE2200243063007F3C02800A0062182191
+:1026E0009062003CAFA3003C00441025A062003C77
+:1026F0008FA3003C9062003C304200401040016CCF
+:102700008FBF00583C108008A380001036100100D5
+:102710008E0200D08C63003427A4003C27A5001053
+:10272000004310210E0007AFAE0200D093A20010AC
+:102730003C038000A20200C58C6202780440FFFEC8
+:102740008F820014AC62024024020002A0620244A4
+:102750003C021000AC6202780E0009250000000067
+:102760000A000AFA8FBF00583C05800890C3000198
+:1027700090A2000B1443014E8FBF005834A4008078
+:102780008C8200189082004C90A200083C026000ED
+:102790008C4254048C8300183C027FFF3442FFFFBC
+:1027A000006218243C0208008C4200B4AC8300187C
+:1027B0003C038000244200013C010800AC2200B42C
+:1027C0008C6201F80440FFFE8F820014AC6201C0ED
+:1027D0000A000AC2240200023C10800890C30001D3
+:1027E0009202000B144301328FBF005827A4001837
+:1027F00036050110240600033C0260008C4254049C
+:102800000E000E080000000027A40028360501E095
+:102810000E000E08240600038FA2002836030100D4
+:10282000AE0200648FA2002CAE0200688FA20030BE
+:10283000AE02006C93A40018906300C52402FF80D0
+:102840000082102400431025304900FF3084007FAF
+:102850003122007F0082102A544000013929008073
+:10286000000411C0244202402403FF8002421021D0
+:1028700000431024AE220094264200403042007FE4
+:102880003C038006004340218FA3001C2402FFFF6D
+:10289000AFA800403C130800927300F710620033A9
+:1028A00093A2001995030014304400FF3063FFFF2A
+:1028B0000064182B10600010000000009504001444
+:1028C0008D07001C8D0600183084FFFF0044202374
+:1028D0000004210000E438210000102100E4202B36
+:1028E00000C2302100C43021AD07001CAD06001825
+:1028F0000A000A1B93A20019950400148D07001CFE
+:102900008D0600183084FFFF008220230004210080
+:10291000000010210080182100C2302300E4202B89
+:1029200000C4302300E33823AD07001CAD060018B7
+:1029300093A200198FA30040A462001497A2001A6A
+:10294000A46200168FA2001CAC6200108FA2001CB3
+:10295000AC62000C93A20019A462002097A2001A96
+:10296000A46200228FA2001CAC6200243C048008F8
+:10297000348300808C6200388FA2002001208821DF
+:10298000AC62003C8FA20020AC82000093A2001831
+:10299000A062004C93A20018A0820009A060006809
+:1029A00093A20018105100512407FF803229007FA4
+:1029B000000911C024420240024210213046007F2B
+:1029C0003C03800000471024AC6200943C02800667
+:1029D00000C2302190C2003CAFA600400000202180
+:1029E00000471025A0C2003C8FA8004095020002BD
+:1029F000950300148D07001C3042FFFF3063FFFF7A
+:102A00008D060018004310230002110000E2382157
+:102A100000E2102B00C4302100C23021AD07001CA1
+:102A2000AD06001895020002A5020014A5000016CC
+:102A30008D020008AD0200108D020008AD02000CEE
+:102A400095020002A5020020A50000228D020008C8
+:102A5000AD0200249102003C304200401040001AB8
+:102A6000262200013C108008A3A90038A380001092
+:102A7000361001008E0200D08D03003427A40040E0
+:102A800027A50038004310210E0007AFAE0200D08A
+:102A900093A200383C038000A20200C58C62027839
+:102AA0000440FFFE8F820014AC6202402402000248
+:102AB000A06202443C021000AC6202780E000925BC
+:102AC00000000000262200013043007F1473000440
+:102AD000004020212403FF800223102400432026ED
+:102AE00093A200180A000A37309100FF93A400183F
+:102AF0008FA3001C2402FFFF1062000A308900FF30
+:102B000024820001248300013042007F1453000519
+:102B1000306900FF2403FF80008310240043102647
+:102B2000304900FF3C0280089042000801208821C3
+:102B3000305000FF123000193222007F000211C015
+:102B400002421021244202402403FF800043182443
+:102B50003C048000AC8300943042007F3C0380063C
+:102B6000004310218C43000C004020211060000B1A
+:102B7000AFA200400E00056A0000000026230001FD
+:102B80002405FF803062007F1453000202252024B8
+:102B9000008518260A000A9B307100FF3C0480085B
+:102BA000348400808C8300183C027FFF3442FFFF96
+:102BB00000621824AC8300183C0380008C6201F88A
+:102BC0000440FFFE00000000AC7201C024020002BD
+:102BD000A06201C43C021000AC6201F80A000AFACB
+:102BE0008FBF00583C04800890C300019082000B06
+:102BF0001443002F8FBF00583490008092020008C9
+:102C00003042004010400020000000009202000806
+:102C100000021600000216030441000502402021B4
+:102C20000E000E8D240500930A000AFA8FBF00588B
+:102C30009202000924030018304200FF1443000DE3
+:102C400002402021240500390E000E25000030210D
+:102C50000E0003458F8400148F82FFA82403001206
+:102C6000A04300090E0003508F8400140A000AFAE2
+:102C70008FBF0058240500360E000E2500003021BD
+:102C80000A000AFA8FBF00580E00034502402021B7
+:102C9000920200058F840014344200200E0003507D
+:102CA000A20200050E0010368F8400148FBF00585A
+:102CB0008FB300548FB200508FB1004C8FB00048DA
+:102CC00003E0000827BD00603C0280083445010095
+:102CD0003C0280008C42014094A3000E0000302191
+:102CE00000402021AF8200143063FFFF3402FFFF59
+:102CF000106200063C0760202402FFFFA4A2000E21
+:102D000094A500DA0A0008ED30A5FFFF03E00008F3
+:102D10000000000027BDFFC83C0280003C06800880
+:102D2000AFB5002CAFB1001CAFBF0030AFB400286E
+:102D3000AFB30024AFB20020AFB00018345101008F
+:102D400034C501008C4301008E2200148CA400D4F1
+:102D50000000A821AF830014004410231840005243
+:102D6000A38000108E22001400005021ACA200D4D9
+:102D700090C3000890A200C53073007FA3A200108A
+:102D80008CB200D08CB400D4304200FF1053003B12
+:102D900093A200108F8300142407FF80000211C04B
+:102DA00000621021244202402463004000471024A6
+:102DB0003063007F3C0980003C08800A00681821CD
+:102DC000AD2200248C62003427A4001427A5001033
+:102DD000024280210290102304400028AFA3001477
+:102DE0009062003C00E21024304200FF14400019C1
+:102DF000020090219062003C34420040A062003CFE
+:102E00008F86001493A3001024C200403042007F3C
+:102E1000004828213C0208008C4200F42463000191
+:102E2000306400FF14820002A3A30010A3A00010CE
+:102E300093A20010AFA50014000211C0244202406A
+:102E400000C2102100471024AD2200240A000B31DB
+:102E500093A200100E0007AF000000003C028008A3
+:102E600034420100AC5000D093A30010240A0001AA
+:102E7000A04300C50A000B3193A2001024020001F8
+:102E8000154200093C0380008C6202780440FFFE7A
+:102E90008F820014AC62024024020002A06202444D
+:102EA0003C021000AC6202789222000B2403000264
+:102EB000304200FF14430072000000009622000818
+:102EC000304300FF24020082146200402402008488
+:102ED0003C028000344901008D22000C952300063D
+:102EE000000216023063FFFF3045003F2402002736
+:102EF00010A2000FAF83000C28A200281040000889
+:102F0000240200312402002110A20009240200251D
+:102F100010A20007938200110A000BA90000000014
+:102F200010A20007938200110A000BA90000000004
+:102F30000E000763012020210A000C290000000078
+:102F40003C0380008C6202780440FFFE8F820014F4
+:102F5000AC62024024020002A06202443C02100063
+:102F6000AC6202780A000C290000000095230006DC
+:102F7000912400058D25000C8D2600108D2700184A
+:102F80008D28001C8D290020244200013C010800EE
+:102F9000A42352C63C010800A02452C53C010800ED
+:102FA000AC2552CC3C010800AC2652D03C010800B4
+:102FB000AC2752D83C010800AC2852DC3C01080088
+:102FC000AC2952E00A000C29A38200111462000A05
+:102FD000240200813C02800834420100944500DA5A
+:102FE000922600058F84001430A5FFFF30C600FF35
+:102FF0000A000BEA3C0760211462005C000000003C
+:103000009222000A304300FF306200201040000787
+:10301000306200403C02800834420100944500DAEE
+:103020008F8400140A000BE82406004010400007BB
+:10303000000316003C02800834420100944500DA87
+:103040008F8400140A000BE82406004100021603D6
+:10305000044100463C02800834420100944500DAF5
+:103060008F8400142406004230A5FFFF3C0760193E
+:103070000E0008ED000000000A000C29000000000E
+:103080009222000B24040016304200FF1044000678
+:103090003C0680009222000B24030017304200FF00
+:1030A000144300320000000034C5010090A2000B60
+:1030B000304200FF1444000B000080218CA200204D
+:1030C0008CA400202403FF80004310240002114040
+:1030D0003084007F004410253C032000004310256D
+:1030E000ACC2083094A200080002140000021403CD
+:1030F000044200012410000194A200083042008024
+:103100005040001A0200A82194A20008304220007A
+:10311000504000160200A8218CA300183C021C2D70
+:10312000344219ED106200110200A8213C0208008F
+:103130008C4200D4104000053C02800824030004A7
+:1031400034420100A04300EC3C02800834420100FC
+:10315000944500DA8F8400142406000630A5FFFF92
+:103160000E0008ED3C0760210200A8210E00092591
+:10317000000000009222000A3042000810400004C3
+:1031800002A010210E00133A0000000002A010213E
+:103190008FBF00308FB5002C8FB400288FB3002470
+:1031A0008FB200208FB1001C8FB0001803E0000820
+:1031B00027BD00382402FF80008220243C029000BA
+:1031C00034420007008220253C028000AC440020ED
+:1031D0003C0380008C6200200440FFFE00000000E1
+:1031E00003E00008000000003C0380002402FF8090
+:1031F000008220243462000700822025AC64002075
+:103200008C6200200440FFFE0000000003E0000884
+:10321000000000003C028008240300053442010045
+:10322000A04300EC3C0280008C4201003C03800083
+:10323000AF8200148C6202780440FFFE8F8200147B
+:10324000AC62024024020002A06202443C02100070
+:10325000AC62027803E000080000000027BDFFE830
+:103260003C068000AFBF001034C7010094E20008A4
+:10327000304400FF38830082388200842C630001D0
+:103280002C420001006218251060002D24020083EA
+:1032900093820011504000368FBF00103C0208009E
+:1032A000904252CC8CC401003C06080094C652C621
+:1032B0003045003F38A3003238A2003F2C630001A4
+:1032C0002C42000100621825AF840014AF86000C68
+:1032D000A38000111460000700E0202124020020D8
+:1032E00014A20012000000003402FFFF14C2000FFD
+:1032F000000000002402002014A2000500E02821A4
+:103300008CE300142402FFFF5062000B8FBF0010FB
+:103310003C040800248452C0000030210E0006F254
+:10332000240700010A000C9C8FBF00100E000763E9
+:10333000000000008FBF00100A00092527BD0018FB
+:10334000148200062482FF808CC301043C026020AA
+:10335000AC4300140A000CD28FBF0010304200FFB3
+:103360002C42000210400004240200228FBF0010F3
+:103370000A000B1327BD0018148200048F82001C62
+:103380008FBF00100A000C5327BD00188C42000CA0
+:103390001040001E00E0282190E3000924020018DC
+:1033A00014620003240200160A000CBD2403000866
+:1033B0001462000724020017240300123C02800854
+:1033C00034420080A04300090A000CCA94A70008F8
+:1033D0005462000794A700088F82FFA82404FFFE10
+:1033E0009043000500641824A043000594A700083A
+:1033F00090A6001B8CA4000094A500068FBF0010AF
+:1034000000073C000A0008C827BD00188FBF001045
+:1034100003E0000827BD00188F85001C3C048000D5
+:1034200094A2002A8CA30034000230C02402FFF0D2
+:1034300000C2102400621821AC83003C8CA2003032
+:103440003C038000AC8200383C0200503442001043
+:10345000AC6200300000000000000000000000002E
+:103460008C620000304200201040FFFD30C2000896
+:10347000104000063C0280008C620408ACA20020D0
+:103480008C62040C0A000CF5ACA200248C430400EE
+:10349000ACA300208C420404ACA200243C03002016
+:1034A0003C028000AC4300303C0480008C82003041
+:1034B000004310241440FFFD8F86001C3C02004096
+:1034C000AC82003094C3002A94C2002894C4002C1B
+:1034D00094C5002E24630001004410213064FFFFD6
+:1034E000A4C2002814850002A4C3002AA4C0002A94
+:1034F00003E00008000000008F84001C27BDFFE8E7
+:103500003C05800424840010AFBF00100E000E089C
+:103510002406000A8F84001C948200129483002EDB
+:103520003042000F244200030043180424027FFFAE
+:103530000043102B10400002AC8300000000000D7F
+:103540000E000CD4000000008F83001C8FBF001001
+:1035500027BD0018946200149463001A3042000FD3
+:1035600000021500006218253C02800003E00008FC
+:10357000AC4300A08F83001C3C02800494440006EE
+:103580009462001A8C650000A464001600441023A5
+:103590003042FFFF0045102B03E0000838420001D5
+:1035A0008F84001C3C0780049486001A8C850000E0
+:1035B00094E20006A482001694E3000600C31023E0
+:1035C0003042FFFF0045102B384200011440FFF845
+:1035D000A483001603E00008000000008F84001C94
+:1035E0003C028004944200069483001A8C850000FB
+:1035F000A4820016006210233042FFFF0045102B0A
+:10360000384200015040000D8F85001C00603021C1
+:103610003C07800494E20006A482001694E30006AE
+:1036200000C310233042FFFF0045102B3842000139
+:103630001440FFF8A48300168F85001C3C03800013
+:10364000346204008CA40020AF820018AC640038FF
+:103650008CA20024AC62003C3C020005AC6200304D
+:1036600003E00008ACA000048F84001C3C030006AB
+:103670008C82000400021140004310253C038000AE
+:10368000AC620030000000000000000000000000FC
+:103690008C620000304200101040FFFD34620400D4
+:1036A000AC80000403E00008AF8200188F86001C85
+:1036B00027BDFFE0AFB10014AFB00010AFBF0018DE
+:1036C0008CC300048CC500248F820018309000FF4A
+:1036D00094C4001A246300012442002024840001C1
+:1036E00024A70020ACC30004AF820018A4C4001AB1
+:1036F000ACC7002404A100060000882104E20005F4
+:1037000094C2001A8CC2002024420001ACC20020E6
+:1037100094C2001A94C300282E040001004310260E
+:103720002C420001004410245040000594C2001AAD
+:1037300024020001ACC2000894C2001A94C30028FD
+:103740000010202B004310262C42000100441025BD
+:1037500014400007000000008CC200081440000460
+:10376000240200108CC300041462000F8F85001C1B
+:103770000E000D68241100018F82001C9443002864
+:103780009442001A14430003000000000E000CD401
+:1037900000000000160000048F85001C0E000D457F
+:1037A000000000008F85001C94A2001E94A4001C41
+:1037B000244200013043FFFF14640002A4A2001E53
+:1037C000A4A0001E1200000A3C02800494A200146F
+:1037D00094A3001A3042000F000215000062182561
+:1037E0003C028000AC4300A00A000DDFACA0000842
+:1037F0009442000694A3001A8CA40000A4A2001610
+:10380000006210233042FFFF0044102B38420001B9
+:103810001040000D02201021006030213C07800480
+:1038200094E20006A4A2001694E3000600C310234D
+:103830003042FFFF0044102B384200011440FFF8D3
+:10384000A4A30016022010218FBF00188FB100140E
+:103850008FB0001003E0000827BD002003E000083F
+:10386000000000008F8200243C030006000211408B
+:10387000004310253C038000AC62003000000000D3
+:1038800000000000000000008C62000030420010C8
+:103890001040FFFD34620400AF82002003E0000806
+:1038A000AF80002403E000080000102103E00008BE
+:1038B000000000003084FFFF30A5FFFF000018214A
+:1038C000108000070000000030820001104000025C
+:1038D00000042042006518210A000DFE0005284062
+:1038E00003E000080060102110C0000624C6FFFF9E
+:1038F0008CA2000024A50004AC8200000A000E087F
+:103900002484000403E000080000000010A0000868
+:1039100024A3FFFFAC8600000000000000000000B0
+:103920002402FFFF2463FFFF1462FFFA24840004D3
+:1039300003E00008000000003C02800834420080E0
+:1039400024030001AC43000CA4430010A443001264
+:10395000A443001403E00008A44300168F82001C57
+:1039600027BDFFD8AFB3001CAFB20018AFB1001431
+:10397000AFB00010AFBF00208C47000C2482008045
+:103980002409FF803C08800E3043007F00808021A6
+:103990003C0A8000004920240068182130B100FF53
+:1039A00030D200FF10E0002900009821260201001B
+:1039B000AD44002C004928243042007F00482021DB
+:1039C0009062000024030050304200FF14430004C2
+:1039D00000000000AD45002C948200DA3053FFFF58
+:1039E0000E000D45000000008F82001C8F83001820
+:1039F00000112C009442001E0012240034840001A7
+:103A000000A228253C02400000A22825AC7000003E
+:103A10008FBF0020AC6000048FB20018AC730008A8
+:103A20008FB10014AC60000C8FB3001CAC640010AC
+:103A30008FB00010AC60001424040001AC600018CA
+:103A400027BD00280A000D79AC65001C8FBF00203F
+:103A50008FB3001C8FB200188FB100148FB000100C
+:103A600003E0000827BD00283C06800034C20100A6
+:103A70009043000F240200101062000E2865001110
+:103A800010A0000724020012240200082405003AB6
+:103A9000106200060000302103E000080000000072
+:103AA000240500351462FFFC000030210A000E25B9
+:103AB000000000008CC200748F83FFA824420FA076
+:103AC00003E00008AC62000C27BDFFE8AFBF0010A8
+:103AD0000E000355240500013C0480088FBF001030
+:103AE0002402000134830080A462001227BD001864
+:103AF0002402000103E00008A080001A27BDFFE0B7
+:103B0000AFB20018AFB10014AFB00010AFBF001CCF
+:103B100030B2FFFF0E000345008088213C02800880
+:103B2000345000809202000924030004304200FF58
+:103B30001443000C3C028008124000082402000AD2
+:103B40000E000E1C00000000920200052403FFFE80
+:103B500000431024A202000524020012A202000960
+:103B60003C02800834420080022020210E000350D5
+:103B7000A040002716400003022020210E000E80E6
+:103B80000000000002202021324600FF8FBF001CF1
+:103B90008FB200188FB100148FB0001024050038C8
+:103BA0000A000E2527BD002027BDFFE0AFBF001C87
+:103BB000AFB20018AFB10014AFB000100E00034553
+:103BC000008080210E000E1C000000003C028008D6
+:103BD0003445008090A2000924120018305100FFE3
+:103BE000123200030200202124020012A0A20009C8
+:103BF00090A200052403FFFE004310240E00035092
+:103C0000A0A2000502002021240500201632000792
+:103C1000000030218FBF001C8FB200188FB100143C
+:103C20008FB000100A00035527BD00208FBF001C75
+:103C30008FB200188FB100148FB000102405003926
+:103C40000A000E2527BD002027BDFFE83C028000AA
+:103C5000AFB00010AFBF0014344201009442000C1A
+:103C6000240500360080802114400012304600FFF9
+:103C70000E000345000000003C0280083442008032
+:103C800024030012A0430009904300053463001090
+:103C90000E000E1CA04300050E0003500200202160
+:103CA000020020210E000355240500200A000EFD0D
+:103CB000000000000E000E25000000000E0003456D
+:103CC000020020213C0280089043001B2405FF9F36
+:103CD00002002021006518248FBF00148FB000104F
+:103CE000A043001B0A00035027BD001827BDFFE0BA
+:103CF000AFBF0018AFB10014AFB0001030B100FF7B
+:103D00000E000345008080213C028008240300123D
+:103D1000344200800E000E1CA04300090E00035028
+:103D20000200202102002021022030218FBF001834
+:103D30008FB100148FB00010240500350A000E2545
+:103D400027BD00203C0480089083000E9082000A6A
+:103D50001443000B000028218F82FFA82403005089
+:103D60002405000190420000304200FF144300048B
+:103D7000000000009082000E24420001A082000E8C
+:103D800003E0000800A010213C0380008C6201F8D1
+:103D90000440FFFE24020002AC6401C0A06201C422
+:103DA0003C02100003E00008AC6201F827BDFFE010
+:103DB000AFB200183C128008AFB10014AFBF001CB6
+:103DC000AFB0001036510080922200092403000A8F
+:103DD000304200FF1443003E000000008E43000408
+:103DE0008E220038506200808FBF001C922200009B
+:103DF00024030050304200FF144300253C028000A1
+:103E00008C4201408E4300043642010002202821EA
+:103E1000AC43001C9622005C8E2300383042FFFF2A
+:103E20000002104000621821AE23001C8E430004E3
+:103E30008E2400389622005C006418233042FFFF75
+:103E400000031843000210400043102A10400006EF
+:103E5000000000008E4200048E230038004310232F
+:103E60000A000F6B000220439622005C3042FFFFE5
+:103E7000000220403C0280083443010034420080AC
+:103E8000ACA4002CA040002424020001A062000C7D
+:103E90000E000F1F00000000104000538FBF001CD9
+:103EA0003C0280008C4401403C0380008C6201F89D
+:103EB0000440FFFE24020002AC6401C0A06201C401
+:103EC0003C021000AC6201F80A000FC88FBF001C52
+:103ED0009222000924030010304200FF1443000422
+:103EE0003C0280008C4401400A000FAF00002821F2
+:103EF0009222000924030016304200FF14430006FA
+:103F000024020014A22200093C0280008C440140DB
+:103F10000A000FC28FBF001C8E2200388E23003C87
+:103F200000431023044100308FBF001C9222002761
+:103F300024420001A2220027922200272C420004E2
+:103F4000144000163C108000922200092403000453
+:103F5000304200FF144300093C0280008C440140C1
+:103F60008FBF001C8FB200188FB100148FB00010EB
+:103F7000240500930A000E8D27BD00208C440140CB
+:103F8000240500938FBF001C8FB200188FB100145E
+:103F90008FB000100A000F0927BD00208E040140D9
+:103FA0000E000345000000008E4200042442FFFF83
+:103FB000AE4200048E22003C2442FFFFAE22003CB1
+:103FC0000E0003508E0401408E0401408FBF001C80
+:103FD0008FB200188FB100148FB0001024050004B8
+:103FE0000A00035527BD00208FB200188FB10014BE
+:103FF0008FB0001003E0000827BD00203C068000C1
+:104000008CC201883C038008346500809063000EF8
+:1040100000021402304400FF306300FF1464000EFD
+:104020003C02800890A20026304200FF10440009A4
+:104030008F82FFA8A0A40026240300509042000015
+:10404000304200FF14430006000000000A00058D06
+:104050008CC401803C02800834420080A0440026C9
+:1040600003E000080000000027BDFFE030E700FF8C
+:10407000AFB20018AFBF001CAFB10014AFB000105A
+:104080000080902114E0000630C600FF0000000010
+:104090000000000D000000000A0010212400010EA5
+:1040A0003C0380089062000E304200FF144600235B
+:1040B0003462008090420026304200FF1446001F08
+:1040C000000000009062000F304200FF1446001B09
+:1040D000000000009062000A304200FF1446000316
+:1040E0008F90FFA80000000D8F90FFA88F82FFAC7B
+:1040F0003C118000AE05003CAC450000A066000A03
+:104100000E0003458E240100A20000240E0003507F
+:104110008E2401003C0380008C6201F80440FFFE05
+:1041200024020002AC7201C0A06201C43C02100073
+:10413000AC6201F80A0010228FBF001C00000000D2
+:104140000000000D00000000240001378FBF001C9C
+:104150008FB200188FB100148FB0001003E0000878
+:1041600027BD00208F83FFA83C0280008C44010003
+:10417000344201008C65003C9046001B0A000FE8A9
+:10418000240700013C0280089043000E9042000A80
+:1041900000431026304200FF03E000080002102B0D
+:1041A00027BDFFE03C028008AFB10014AFB00010A3
+:1041B000AFBF001834500080920200052403003085
+:1041C0003042003014430085008088218F82001C1B
+:1041D0008C42000C104000828FBF00180E000D456D
+:1041E000000000008F860018ACD100009202000889
+:1041F00092030009304200FF00021200306300FF0A
+:1042000000431025ACC200049202004D00021600CB
+:104210000002160304410005000000003C030800F2
+:104220008C6300480A0010603C108008920200086D
+:104230003042004014400003000018219202002781
+:10424000304300FF3C108008361100809222004D60
+:1042500000031E00304200FF000214000062182517
+:10426000ACC300088E2400308F82001CACC4000C4C
+:104270008E2500349443001E3C02C00BACC50010D8
+:10428000006218258E22003800002021ACC20014E4
+:104290008E22003CACC200180E000D79ACC3001C8D
+:1042A0008E0200048F8400183C058000AC82000060
+:1042B0008E220020AC8200048E22001CAC820008FA
+:1042C0008E2200588CA3007400431021AC82000C95
+:1042D0008E22002CAC8200108E2200408E230044DF
+:1042E0000002140000431025AC8200149222004DFD
+:1042F00024030080304200FF14430004000000004B
+:10430000AC8000180A0010A48F82001C8E23000CC1
+:10431000240200011062000E2402FFFF9222000816
+:10432000304200401440000A2402FFFF8E23000C9C
+:104330008CA20074006218233C0208000062102462
+:1043400014400002000028210060282100051043CD
+:10435000AC8200188F82001C000020219443001EB4
+:104360003C02C00C006218258F8200180E000D79E7
+:10437000AC43001C3C038008346201008C42000006
+:104380008F850018346300808FBF0018ACA2000036
+:10439000ACA000048C6400488F82001C8FB1001414
+:1043A000ACA40008ACA0000CACA000109063000509
+:1043B0009446001E3C02400D00031E0000C2302542
+:1043C000ACA300148FB00010ACA0001824040001AE
+:1043D000ACA6001C0A000D7927BD00208FBF001875
+:1043E0008FB100148FB0001003E0000827BD00203B
+:1043F0003C0280009443007C3C028008344601006B
+:10440000308400FF3065FFFF2402000524A34650DE
+:10441000A0C4000C5482000C3065FFFF90C2000D58
+:104420002C4200071040000724A30A0090C3000D8F
+:10443000240200140062100400A210210A0010E0FF
+:104440003045FFFF3065FFFF3C02800834420080AA
+:1044500003E00008A44500143C0380083468008091
+:10446000AD050038346701008CE2001C308400FF89
+:1044700000A210231840000330C600FF24A2FFFC56
+:10448000ACE2001C30820001504000083C03800870
+:104490008D02003C00A210230441001224040005F8
+:1044A0008C62000410A2000F3C0380088C620004A0
+:1044B00014A2001E000000003C0208008C4200D83C
+:1044C00030420020104000093C0280083462008025
+:1044D000906300089042004C144300043C028008A2
+:1044E000240400040A0010CA0000000034430080C5
+:1044F00034420100A040000C24020001A462001418
+:1045000010C0000A3C0280008C4401003C03800083
+:104510008C6201F80440FFFE24020002AC6401C07A
+:10452000A06201C43C021000AC6201F803E0000884
+:104530000000000027BDFFE800A61823AFBF001051
+:1045400018600080308800FF3C02800834470080FB
+:10455000A0E0002434440100A0E000278C82001C6D
+:1045600000A2102304400056000000008CE2003C32
+:1045700094E3005C8CE4002C004530233063FFFFA3
+:1045800000C318210083202B1080000400E01821B4
+:104590008CE2002C0A00113900A2102194E2005C88
+:1045A0003042FFFF00C2102100A21021AC62001CAB
+:1045B0003C028008344400809482005C8C83001CA0
+:1045C0003042FFFF0002104000A210210043102BD8
+:1045D00010400004000000008C82001C0A00114CF6
+:1045E0003C0680089482005C3042FFFF00021040CD
+:1045F00000A210213C06800834C3010034C70080AB
+:10460000AC82001CA060000CACE500388C62001C81
+:1046100000A210231840000224A2FFFCAC62001C80
+:1046200031020001104000083C0380088CE2003C8D
+:1046300000A2102304410012240400058CC20004CF
+:1046400010A200108FBF00108C62000414A2004F53
+:104650008FBF00103C0208008C4200D8304200207E
+:104660001040000A3C028008346200809063000819
+:104670009042004C144300053C02800824040004CE
+:104680008FBF00100A0010CA27BD001834430080F5
+:1046900034420100A040000C24020001A462001476
+:1046A0003C0280008C4401003C0380008C6201F8D5
+:1046B0000440FFFE240200020A00119900000000DD
+:1046C0008CE2001C004610230043102B54400001D4
+:1046D000ACE5001C94E2005C3042FFFF0062102B4E
+:1046E000144000072402000294E2005C8CE3001CEA
+:1046F0003042FFFF00621821ACE3001C24020002DC
+:10470000ACE500380E000F1FA082000C1040001F07
+:104710008FBF00103C0280008C4401003C038000ED
+:104720008C6201F80440FFFE24020002AC6401C068
+:10473000A06201C43C021000AC6201F80A0011B191
+:104740008FBF001031020010104000108FBF00100A
+:104750003C028008344500808CA3001C94A2005CBD
+:10476000006618233042FFFF006218213C023FFF21
+:104770003444FFFF0083102B5440000100801821B7
+:1047800000C31021ACA2001C8FBF001003E0000882
+:1047900027BD001827BDFFE800C0402100A6302338
+:1047A000AFBF001018C00026308A00FF3C0280080E
+:1047B000344900808D24001C8D23002C0088202388
+:1047C0000064182B1060000F344701008CE20020B9
+:1047D00000461021ACE200208CE200200044102BA7
+:1047E0001440000B3C023FFF8CE2002000441023E9
+:1047F000ACE200209522005C3042FFFF0A0011D19C
+:1048000000822021ACE00020008620213C023FFFF6
+:104810003443FFFF0064102B54400001006020214E
+:104820003C0280083442008000851821AC43001C03
+:10483000A0400024A04000270A0012233C03800867
+:1048400031420010104000433C0380083C068008C1
+:1048500034C400808C82003C004810235840003E45
+:10486000346600809082002424420001A08200244B
+:10487000908200243C0308008C630024304200FF37
+:104880000043102B144000688FBF001034C2010099
+:104890008C42001C00A2102318400063000000009E
+:1048A0008CC300049482005C006818233042FFFF30
+:1048B00000031843000210400043102A1040000576
+:1048C000000000008CC20004004810230A001206F9
+:1048D000000210439482005C3042FFFF000210404F
+:1048E0003C068008AC82002C34C5008094A2005C99
+:1048F0008CA4002C94A3005C3042FFFF0002104007
+:10490000008220213063FFFF008320210104102159
+:10491000ACA2001C8CC2000434C60100ACC2001C56
+:10492000240200020E000F1FA0C2000C1040003E27
+:104930008FBF00103C0280008C4401003C038000CB
+:104940008C6201F80440FFFE240200020A001253A8
+:104950000000000034660080ACC5003834640100FB
+:104960008C82001C00A210231840000224A2FFFC2D
+:10497000AC82001C314200015040000A3C03800818
+:104980008CC2003C00A21023044300142404000540
+:104990008C62000414A200033C0380080A00124544
+:1049A000240400058C62000414A2001F8FBF0010B5
+:1049B0003C0208008C4200D8304200201040000A1F
+:1049C0003C02800834620080906300089042004CF2
+:1049D000144300053C028008240400048FBF00102B
+:1049E0000A0010CA27BD0018344300803442010079
+:1049F000A040000C24020001A46200143C028000CC
+:104A00008C4401003C0380008C6201F80440FFFEEE
+:104A100024020002AC6401C0A06201C43C02100088
+:104A2000AC6201F88FBF001003E0000827BD00183A
+:104A300027BDFFE83C0A8008AFBF00103549008061
+:104A40008D22003C00C04021308400FF004610232E
+:104A50001840009D30E700FF3547010024020001A7
+:104A600000A63023A0E0000CA0E0000DA522001459
+:104A700018C00024308200108D23001C8D22002CD1
+:104A8000006818230043102B1040000F00000000A6
+:104A90008CE2002000461021ACE200208CE20020D5
+:104AA0000043102B1440000B3C023FFF8CE200201F
+:104AB00000431023ACE200209522005C3042FFFF4F
+:104AC0000A00128200621821ACE000200066182162
+:104AD0003C023FFF3446FFFF00C3102B544000014F
+:104AE00000C018213C028008344200800065182173
+:104AF000AC43001CA0400024A04000270A0012D0B4
+:104B00003C038008104000403C0380088D22003C9C
+:104B1000004810235840003D346700809122002453
+:104B200024420001A1220024912200243C03080019
+:104B30008C630024304200FF0043102B1440009A85
+:104B40008FBF00108CE2001C00A2102318400096BA
+:104B5000000000008D4300049522005C00681823CB
+:104B60003042FFFF00031843000210400043102AA8
+:104B700010400005012020218D4200040048102330
+:104B80000A0012B3000210439522005C3042FFFF7E
+:104B9000000210403C068008AC82002C34C5008026
+:104BA00094A2005C8CA4002C94A3005C3042FFFF14
+:104BB00000021040008220213063FFFF0083182193
+:104BC00001031021ACA2001C8CC2000434C60100F9
+:104BD000ACC2001C240200020E000F1FA0C2000C79
+:104BE000104000718FBF00103C0280008C44010017
+:104BF0003C0380008C6201F80440FFFE24020002A6
+:104C00000A0012FA0000000034670080ACE50038AA
+:104C1000346601008CC2001C00A210231840000260
+:104C200024A2FFFCACC2001C3082000150400008EE
+:104C30003C0380088CE2003C00A210230443005196
+:104C4000240400058C62000410A2003E3C0380088E
+:104C50008C62000454A200548FBF00103C02080074
+:104C60008C4200D830420020104000063C028008F0
+:104C700034620080906300089042004C1043004072
+:104C80003C0280083443008034420100A040000C04
+:104C900024020001A46200143C0280008C44010044
+:104CA0003C0380008C6201F80440FFFE24020002F5
+:104CB000AC6401C0A06201C43C021000AC6201F807
+:104CC0000A0013388FBF001024020005A12000271E
+:104CD00014E2000A3C038008354301009062000D95
+:104CE0002C420006504000053C0380089062000DF5
+:104CF00024420001A062000D3C038008346700805C
+:104D0000ACE50038346601008CC2001C00A2102300
+:104D10001840000224A2FFFCACC2001C308200013B
+:104D20005040000A3C0380088CE2003C00A21023A3
+:104D300004410014240400058C62000414A2000342
+:104D40003C0380080A00132F240400058C62000431
+:104D500014A200158FBF00103C0208008C4200D83E
+:104D6000304200201040000A3C028008346200807B
+:104D7000906300089042004C144300053C028008F8
+:104D8000240400048FBF00100A0010CA27BD0018B9
+:104D90003443008034420100A040000C2402000192
+:104DA000A46200148FBF001003E0000827BD0018A4
+:104DB0003C0B800827BDFFE83C028000AFBF00101D
+:104DC00034420100356A00809044000A35690100D0
+:104DD0008C4500148D4800389123000C308400FF6E
+:104DE000010510231C4000B3306700FF2CE20006D1
+:104DF000504000B18FBF00102402000100E23004D7
+:104E000030C200035440000800A8302330C2000C18
+:104E1000144000A130C20030144000A38FBF001026
+:104E20000A0013FC0000000018C0002430820010AB
+:104E30008D43001C8D42002C006818230043102B6A
+:104E40001040000F000000008D22002000461021BD
+:104E5000AD2200208D2200200043102B1440000BB7
+:104E60003C023FFF8D22002000431023AD22002092
+:104E70009542005C3042FFFF0A0013700062182167
+:104E8000AD200020006618213C023FFF3446FFFFA2
+:104E900000C3102B5440000100C018213C028008C0
+:104EA0003442008000651821AC43001CA04000245F
+:104EB000A04000270A0013BE3C03800810400040B9
+:104EC0003C0380088D42003C004810231840003D00
+:104ED000346700809142002424420001A142002452
+:104EE000914200243C0308008C630024304200FF00
+:104EF0000043102B144000708FBF00108D22001C47
+:104F000000A210231840006C000000008D63000414
+:104F10009542005C006818233042FFFF00031843ED
+:104F2000000210400043102A1040000501402021DB
+:104F30008D620004004810230A0013A100021043F0
+:104F40009542005C3042FFFF000210403C068008A2
+:104F5000AC82002C34C5008094A2005C8CA4002C90
+:104F600094A3005C3042FFFF000210400082202129
+:104F70003063FFFF0083182101031021ACA2001C45
+:104F80008CC2000434C60100ACC2001C2402000222
+:104F90000E000F1FA0C2000C104000478FBF001072
+:104FA0003C0280008C4401003C0380008C6201F8CC
+:104FB0000440FFFE240200020A0013EE000000007D
+:104FC00034670080ACE50038346601008CC2001CF8
+:104FD00000A210231840000224A2FFFCACC2001C57
+:104FE000308200015040000A3C0380088CE2003C03
+:104FF00000A2102304430014240400058C62000462
+:1050000014A200033C0380080A0013E024040005F6
+:105010008C62000414A200288FBF00103C0208001C
+:105020008C4200D8304200201040000A3C02800828
+:1050300034620080906300089042004C14430005E5
+:105040003C028008240400048FBF00100A0010CA2C
+:1050500027BD00183443008034420100A040000CFA
+:1050600024020001A46200143C0280008C44010070
+:105070003C0380008C6201F80440FFFE2402000221
+:10508000AC6401C0A06201C43C021000AC6201F833
+:105090000A0013FC8FBF00108FBF001001003021E9
+:1050A0000A00111B27BD0018010030210A00125A06
+:1050B00027BD00188FBF001003E0000827BD0018AF
+:1050C0003C0380083464010024020003A082000C29
+:1050D0008C62000403E00008AC82001C3C058008E0
+:1050E00034A300809062002734A501002406004309
+:1050F00024420001A0620027906300273C020800C0
+:105100008C420048306300FF146200043C076021B9
+:1051100094A500DA0A0008ED30A5FFFF03E00008BF
+:105120000000000027BDFFE8AFBF00103C02800078
+:105130000E0014058C4401803C02800834430100B9
+:10514000A060000C8C4200048FBF001027BD001827
+:1051500003E00008AC62001C27BDFFE03C028008B1
+:10516000AFBF0018AFB10014AFB0001034450080DD
+:10517000344601003C0880008D09014090C3000CBA
+:105180008CA4003C8CA200381482003B306700FFE6
+:105190009502007C90A30027146000093045FFFFB2
+:1051A0002402000554E200083C04800890C2000D6F
+:1051B00024420001A0C2000D0A0014403C048008F3
+:1051C000A0C0000D3C048008348201009042000C15
+:1051D00024030005304200FF1443000A24A205DC2A
+:1051E00034830080906200272C4200075040000565
+:1051F00024A20A0090630027240200140062100415
+:1052000000A210213C108008361000803045FFFFBE
+:10521000012020210E001405A60500149602005C52
+:105220008E0300383C1180003042FFFF0002104026
+:1052300000621821AE03001C0E0003458E240140BD
+:105240009202002534420040A20200250E000350C5
+:105250008E2401408E2401403C0380008C6201F8C2
+:105260000440FFFE24020002AC6401C0A06201C43D
+:105270003C021000AC6201F88FBF00188FB100141F
+:0C5280008FB0001003E0000827BD0020E4
+:04528C008008010095
+:10529000800800808008000000000C8000003200C0
+:1052A0008008024008000EDC08000F3408000F7868
+:1052B00008001010080010508008010080080080CD
+:0452C0008008000062
+:0C52C4000A0000220000000000000000B2
+:1052D0000000000D6370352E302E306A3300000060
+:1052E00005000004000000000000000000000000B5
+:1052F000000000000000000038003C00000000003A
+:10530000000000000000000000000000000000207D
+:10531000000000000000000000000000000000008D
+:10532000000000000000000000000000000000007D
+:105330000000000000000000210038000000000113
+:105340000000002B00000000000000000000000032
+:1053500010000003000000000000000D0000000D20
+:105360003C020800244254243C0308002463564CA9
+:10537000AC4000000043202B1480FFFD24420004B9
+:105380003C1D080037BD9FFC03A0F0213C10080025
+:10539000261000883C1C0800279C54240E0002881C
+:1053A000000000000000000D00A018210080102166
+:1053B000008028213C0460003C07600024060008AF
+:1053C00010600006348420788C420000ACE2200893
+:1053D0008C63000003E00008ACE3200C0A000E2AF6
+:1053E00000000000240300403C02600003E00008CD
+:1053F000AC4320003C0760008F8600008CE52074E1
+:105400000086102100A2182B14600007000028213C
+:105410008F8AFD9824050001A14400138F890000A4
+:1054200001244021AF88000003E0000800A0102103
+:105430008F84FD988F8500009086001330C300FF95
+:1054400000A31023AF82000003E00008A080001337
+:105450008F84FD9827BDFFE8AFB00010AFBF0014E8
+:10546000908900119087001124020028312800FF44
+:105470003906002830E300FF2485002C2CD00001E1
+:10548000106200162484001C0E0000390000000089
+:105490008F8FFD983C0560002402020495EE003ECB
+:1054A00095ED003C000E5C0031ACFFFF016C502517
+:1054B000ACAA20105200000124020004ACA220007B
+:1054C0000000000000000000000000008FBF00147A
+:1054D0008FB0001003E0000827BD00180A0000711B
+:1054E000000028218F85FD9827BDFFD8AFBF002081
+:1054F000AFB3001CAFB20018AFB10014AFB00010D2
+:105500000080982190A4001124B0001C24B1002C2C
+:10551000308300FF386200280E00005B2C5200012F
+:105520000E00006300000000020020211240000273
+:1055300002202821000028210E0000390000000070
+:105540008F8DFD983C0880003C05600095AC003EC6
+:1055500095AB003C02683025000C4C00316AFFFF1F
+:10556000012A3825ACA7201024020202ACA6201480
+:1055700052400001240200028FBF00208FB3001CA4
+:105580008FB200188FB100148FB0001027BD002813
+:1055900003E00008ACA2200027BDFFE0AFB2001876
+:1055A000AFB10014AFB00010AFBF001C3C116000E1
+:1055B0008E2320748F82000030D0FFFF30F2FFFF77
+:1055C0001062000C2406008F0E000039000000005D
+:1055D0003C06801F0010440034C5FF00011238252E
+:1055E00024040002AE27201000003021AE25201434
+:1055F000AE2420008FBF001C8FB200188FB10014A2
+:105600008FB0001000C0102103E0000827BD00206B
+:1056100027BDFFE0AFB0001030D0FFFFAFBF0018D4
+:10562000AFB100140E00003930F1FFFF001024006C
+:10563000009180253C036000AC7020108FBF0018E3
+:105640008FB100148FB0001024020004AC6220005F
+:1056500027BD002003E000080000102127BDFFE85F
+:105660003C0B6018AFBF00108D6F50002418FF7FF7
+:10567000340C807101F8702435CD380C240A0031C7
+:105680003C098000AD6D50003C08800AAD6C53BCF5
+:10569000AD2A00080E00049BAF88002C0E000459B0
+:1056A000000000000E000048000000003C07600001
+:1056B0008CE508082406FFF03C03570900A62024C7
+:1056C0003462F0001082005024190001AF800034D1
+:1056D0000E000BBC000000003C0660168CC40000ED
+:1056E0003C0760148CE500A03C03FFFF00831024FE
+:1056F0003C1F535300051FC2105F003D34C57C00A2
+:1057000094A201F2A780004C10400003A780005C27
+:10571000384B1E1EA78B004C94A201F810400004C9
+:105720008F8D0034384C1E1EA78C005C8F8D00348A
+:1057300011A000049784005C240E0020A78E004C6A
+:105740009784005C2C8F008151E0000124040080CC
+:105750009785004C2CB80401530000012405040077
+:105760003C0260008C4304382419103C307FFFFF5A
+:1057700013F900033087FFFF50E0000F24060050AC
+:10578000A380005E9388005E51000010A784005C37
+:10579000A780005C9785005C8FBF0010A780004C3D
+:1057A000A7800054A78000723C010800AC2500804F
+:1057B00003E0000827BD0018A386005E9388005E02
+:1057C0005500FFF4A780005CA784005CA785004C0F
+:1057D0008FBF00109785005CA7800054A7800072DF
+:1057E0003C010800AC25008003E0000827BD00183C
+:1057F00000035080014648218D2800043C066000CB
+:105800000A00010F010628210A000103AF990034A4
+:105810003083FFFF8F88002C8F87002800032140F2
+:105820003C0580003C020050008248253C06600098
+:105830003C0A010034AC04008CCD08E001AA5824D5
+:1058400011600005000000008CCF08E024E7000193
+:1058500001EA7025ACCE08E08D19001001805821B6
+:10586000ACB900388D180014ACB8003CACA90030BD
+:105870000000000000000000000000000000000028
+:105880000000000000000000000000000000000018
+:105890003C0380008C640000308200201040FFFD3B
+:1058A0003C0F60008DED08E03C0E010001AE1824B5
+:1058B0001460FFE100000000AF87002803E000084B
+:1058C000AF8B00388F85002C240BFFF03C06800046
+:1058D00094A7001A8CA9002430ECFFFF000C38C0FC
+:1058E00000EB5024012A4021ACC8003C8CA40024C9
+:1058F0008CC3003C008310231840003300000000DC
+:105900008CAD002025A200013C0F0050ACC2003835
+:1059100035EE00103C068000ACCE003000000000E8
+:105920000000000000000000000000000000000077
+:105930000000000000000000000000003C048000A7
+:105940008C990000333800201300FFFD30E200087E
+:10595000104000173C0980008C880408ACA8001097
+:105960008C83040CACA300143C1900203C1880006C
+:10597000AF19003094AE001894AF001C01CF302155
+:10598000A4A6001894AD001A25A70001A4A7001A28
+:1059900094AB001A94AC001E118B000300000000B1
+:1059A00003E000080000000003E00008A4A0001AC3
+:1059B0008D2A0400ACAA00108D240404ACA40014A9
+:1059C0000A0001AA3C1900208CA200200A000192C2
+:1059D0003C0F00500A0001800000000027BDFFE8D6
+:1059E000AFBF00100E0001C4000000008F89002C22
+:1059F0008FBF00103C038000A520000A9528000AF4
+:105A00009527000427BD00183105FFFF30E6000F81
+:105A10000006150000A2202503E00008AC64008009
+:105A20003C0508008CA500208F83000427BDFFE8FB
+:105A3000AFB00010AFBF001410A300100000802111
+:105A4000240400010204300400A6202400C3102412
+:105A50005044000626100001001018802787FD9C86
+:105A60001480000A00671821261000012E09000288
+:105A70005520FFF38F830004AF8500048FBF00140F
+:105A80008FB0001003E0000827BD00188C680000EC
+:105A90003C058000ACA800240E0001C626100001C1
+:105AA0003C0508008CA500200A0001EB2E0900022D
+:105AB00024050001008518043C0408008C840020A3
+:105AC00027BDFFC8AFBF003400831024AFBE003035
+:105AD000AFB7002CAFB60028AFB50024AFB400209C
+:105AE000AFB3001CAFB20018AFB1001410400051AA
+:105AF000AFB000108F84002C948700069488000AB1
+:105B000000E8302330D5FFFF12A0004B8FBF0034D8
+:105B1000948B0018948C000A016C50233142FFFFD3
+:105B200002A2482B1520000202A0202100402021C3
+:105B30002C8F000515E0000200809821241300043A
+:105B40000E000153026020218F87002C02609021FB
+:105B5000AF80003094F4000A026080211260004E91
+:105B60003291FFFF3C1670003C1440003C1E2000A8
+:105B70003C1760008F9900388F38000003161824F6
+:105B80001074004F0283F82B17E00036000000006D
+:105B9000107E00478F86003014C0003A24030001B5
+:105BA00002031023022320213050FFFF1600FFF1D3
+:105BB0003091FFFF8F87002C3C1100203C108000AB
+:105BC000AE11003094EB000A3C178000024B5021CC
+:105BD000A4EA000A94E9000A94E800043123FFFFD4
+:105BE0003106000F00062D000065F025AEFE008096
+:105BF00094F3000A94F6001812D3003600122140E4
+:105C00008CFF00148CF4001003E468210000C02114
+:105C100001A4782B0298702101CF6021ACED001413
+:105C2000ACEC001002B2382330F5FFFF16A0FFB82D
+:105C30008F84002C8FBF00348FBE00308FB7002CB4
+:105C40008FB600288FB500248FB400208FB3001CBE
+:105C50008FB200188FB100148FB0001003E000085D
+:105C600027BD00381477FFCC8F8600300E000D8BD7
+:105C700002002021004018218F86003010C0FFC98B
+:105C800002031023027070238F87002C01C3682148
+:105C90000A00027631B2FFFF8F86003014C0FFC9C0
+:105CA0003C1100203C1080000A000240AE11003080
+:105CB0000E0003C4020020210A00026D00401821DA
+:105CC000020020210E0007DB022028210A00026DBD
+:105CD000004018210E000180000000000A00025957
+:105CE00002B2382327BDFFD8AFB40020AFB3001CE9
+:105CF000AFB20018AFB10014AFB00010AFBF0024B6
+:105D00000E0000E6241300013C0280083C03200042
+:105D10003C010800AC200070345400803472000351
+:105D20003C1080002411FF800E0001D7000000000D
+:105D30008E06000038C5000130A400011480FFFA6F
+:105D4000000000008E07010024030C0010E300098E
+:105D50003C0580008E0901002D2830805500001080
+:105D60003C0480008E0B01002D6A31811140000C33
+:105D70003C0480008CAC0100118300040000202151
+:105D80008CAE010025CDFF8131A400FF8E0F0100F4
+:105D90000E0001FBAE0F00240A0002C13C0480008B
+:105DA0008C9F010024180020AC9F002092990000D5
+:105DB000332300FF1078001F2402005010620022DD
+:105DC000000000003C0480008C830100146000038C
+:105DD00000000000566000143C0440008C8201006A
+:105DE0008C990100000098210051F824001F79408F
+:105DF0003338007F01F8702501D26825AC8D08305A
+:105E00008C8C01008C890100258B010001715024CC
+:105E1000000A39403128007F00E8302500D22825CB
+:105E2000AC8508303C044000AE0401380A000299F9
+:105E3000000000008C8501000E00078D2404008006
+:105E40000A0002C13C0480008C8401000E0013EAA9
+:105E5000000000000A0002C13C04800000A4102BD6
+:105E600024030001104000090000302100052840F3
+:105E700000A4102B04A00003000318405440FFFCB2
+:105E8000000528405060000A0004182B0085382BBC
+:105E900054E000040003184200C33025008520238D
+:105EA000000318421460FFF9000528420004182B73
+:105EB00003E0000800C310213084FFFF30C600FF5C
+:105EC0003C0780008CE201B80440FFFE00064C0055
+:105ED000012430253C08200000C820253C03100088
+:105EE000ACE00180ACE50184ACE4018803E000088B
+:105EF000ACE301B83C0660008CC5201C2402FFF016
+:105F000030830200308601001060000E00A22824B9
+:105F100034A500013087300010E0000530830C000C
+:105F200034A500043C04600003E00008AC85201C9C
+:105F30001060FFFD3C04600034A5000803E0000889
+:105F4000AC85201C54C0FFF334A500020A000315E1
+:105F50003087300027BDFFE8AFB00010AFBF00149E
+:105F60003C076000240600021080001100A0802180
+:105F70008F8300380E00030C8C6400188F82003869
+:105F800000002021240600018C45000C0E0002FDBB
+:105F9000000000001600000224020003000010218F
+:105FA0008FBF00148FB0001003E0000827BD001859
+:105FB0008CE8201C2409FFF001092824ACE5201CF2
+:105FC0008F8700380A0003328CE5000C3C02600E1B
+:105FD0000080402134460100240900180000000020
+:105FE00000000000000000003C0A00503C0380005C
+:105FF00035470200AC68003834640400AC65003CEE
+:10600000AC6700308C6C0000318B00201160FFFD0C
+:106010002407FFFF2403007F8C8D00002463FFFF13
+:1060200024840004ACCD00001467FFFB24C60004E8
+:1060300000000000000000000000000024A4020096
+:106040000085282B3C0300203C0E80002529FFFF03
+:1060500001054021ADC300301520FFE0008028215C
+:1060600003E00008000000008F82003827BDFFD841
+:10607000AFB3001CAFBF0020AFB20018AFB1001427
+:10608000AFB0001094460002008098218C52001896
+:106090002CC300818C4800048C4700088C51000CF4
+:1060A0008C490010106000078C4A00142CC40004B6
+:1060B0001480001330EB000730C5000310A000105F
+:1060C000000000002410008B020020210220282163
+:1060D0000E0002FD240600031660000224020003E5
+:1060E000000010218FBF00208FB3001C8FB200185A
+:1060F0008FB100148FB0001003E0000827BD002806
+:106100001560FFF12410008B3C0C80003C03002044
+:10611000241F0001AD830030AF9F0030000000005D
+:1061200000000000000000002419FFF024D8000F38
+:10613000031978243C1000D0AD88003801F0702598
+:1061400024CD00033C08600EAD87003C358504007B
+:10615000AD8E0030000D38823504003C3C038000D9
+:106160008C6B0000316200201040FFFD0000000039
+:1061700010E0000824E3FFFF2407FFFF8CA80000C5
+:106180002463FFFF24A50004AC8800001467FFFB14
+:10619000248400043C04600EAC860038000000003B
+:1061A00000000000000000003C0700203C068000CA
+:1061B0000120202101402821ACC700300E000342FD
+:1061C000000080210E00030C024020210A000382FF
+:1061D0000200202127BDFFE0AFB200183092FFFF80
+:1061E000AFB10014AFBF001CAFB000101640000DDF
+:1061F000000088210A0003F1022010212405000379
+:10620000508500278CE5000C0000000D262C0001B5
+:106210003191FFFF24EB00200232502B1140001976
+:10622000AF8B00388F820030144000168F87003803
+:106230003C0670003C0320008CE5000000A62024F2
+:10624000148300108F840040000544023C09800044
+:1062500000A980241480FFE9310600FF2CCA000B3E
+:106260001140FFEB262C0001000668803C0E080060
+:1062700025CE51C801AE60218D8B00000160000861
+:1062800000000000022010218FBF001C8FB20018F8
+:106290008FB100148FB0001003E0000827BD00206C
+:1062A0000E0002FD240400841600FFD88F870038FA
+:1062B0000A0003D2AF800040020028210E00032410
+:1062C000240400018F8700380A0003D2AF82004007
+:1062D000020028210E000324000020210A000401EE
+:1062E0008F8700380E000369020020218F87003855
+:1062F0000A0003D2AF82004030AFFFFF000F19C089
+:106300003C0480008C9001B80600FFFE3C1920047C
+:106310003C181000AC830180AC800184AC990188EA
+:10632000AC9801B80A0003D3262C000190E20002C9
+:1063300090FF00030000202100023A0000FF282502
+:10634000240600080E0002FD000000001600FFDD1C
+:10635000240200038F870038000010210A0003D2B6
+:10636000AF82004090E50002000020210A000420D6
+:106370002406000994E5000490E9000390E300027C
+:10638000000534000009420000C8202500832825AC
+:106390002406000A0A0004200000202190E50002E3
+:1063A000000020210A0004202406000B000449C23A
+:1063B0003127003F000443423C0280000008204097
+:1063C000240316802CE60020AC43002C24EAFFE0D6
+:1063D0002482000114C0000330A900FF00801021B6
+:1063E000314700FF000260803C0D8000240A00015C
+:1063F000018D20213C0B000E00EA2804008B302187
+:1064000011200005000538278CCE000001C5382575
+:1064100003E00008ACC700008CD800000307782414
+:1064200003E00008ACCF000027BDFFE0AFB10014CF
+:10643000AFB00010AFBF00183C0760008CE4080844
+:106440003402F0003C1160003083F000240501C0EC
+:106450003C04800E00003021106200062410000170
+:106460008CEA08083149F0003928E0000008382B90
+:10647000000780403C0D0200AE2D0814240C16804D
+:106480003C0B80008E2744000E000E34AD6C002CB7
+:10649000120000043C0216912405000112050010B0
+:1064A0003C023D6C345800E0AE3844083C11080012
+:1064B0008E31007C8FBF00183C06600000118540C3
+:1064C000360F16808FB100148FB000103C0E020002
+:1064D00027BD0020ACCF442003E00008ACCE08105C
+:1064E0003C0218DA345800E0AE3844083C11080089
+:1064F0008E31007C8FBF00183C0660000011854083
+:10650000360F16808FB100148FB000103C0E0200C1
+:1065100027BD0020ACCF442003E00008ACCE08101B
+:106520000A00043A240500010A00043A0000282168
+:1065300024020400A7820010A78000080000202188
+:106540003C06080024C654B02405FFFF248900013E
+:10655000000440803124FFFF010618212C87002011
+:1065600014E0FFFAAC65000024040400A7840012C4
+:10657000A780000A000020213C06080024C65530F0
+:106580002405FFFF248D00010004608031A4FFFF7B
+:10659000018658212C8A00201540FFFAAD650000C5
+:1065A000A7800014A780000CA780000E0000202107
+:1065B0003C06080024C655B02405FFFF24990001BD
+:1065C0000004C0803324FFFF030678212C8E0004D2
+:1065D00015C0FFFAADE500003C0560008CA73D004A
+:1065E0002403E08F00E310243446014003E0000858
+:1065F000ACA63D002487007F000731C224C5FFFF01
+:10660000000518C2246400013082FFFF000238C078
+:10661000A784001C3C010800AC270030AF800018A4
+:1066200000002821000020210000302124890001E1
+:1066300000A728213124FFFF2CA817011100000317
+:106640002C8300801460FFF924C6000100C02821BB
+:10665000AF86001810C0001DA786001624CAFFFFD1
+:10666000000A11423C080800250855B01040000AF5
+:1066700000002021004030212407FFFF248E00016C
+:106680000004688031C4FFFF01A860210086582BF8
+:106690001560FFFAAD87000030A2001F50400008CF
+:1066A00000043080240300010043C804000410806B
+:1066B000004878212738FFFF03E00008ADF800000C
+:1066C00000C820212405FFFFAC85000003E000087E
+:1066D0000000000030A5FFFF30C6FFFF30A8001FFC
+:1066E0000080602130E700FF0005294200005021B2
+:1066F00010C0001D24090001240B00012518000111
+:10670000010B2004330800FF01267826390E0020F3
+:106710002DED00012DC2000101A218251060000D11
+:10672000014450250005C880032C40210100182198
+:1067300010E0000F000A20278D040000008A1825B1
+:10674000AD03000024AD00010000402100005021F5
+:1067500031A5FFFF252E000131C9FFFF00C9102B15
+:106760001040FFE72518000103E0000800000000CA
+:106770008D0A0000014440240A000520AC68000096
+:1067800027BDFFE830A5FFFF30C6FFFFAFB0001008
+:10679000AFBF001430E7FFFF000050213410FFFFAF
+:1067A0000000602124AF001F00C048212418000110
+:1067B0002419002005E0001601E010210002F94331
+:1067C000019F682A0009702B01AE402411000017B8
+:1067D000000C18800064102110E000058C4B0000B4
+:1067E00000F84004000838230167582400003821CD
+:1067F0001540004100004021556000163169FFFF3F
+:10680000258B0001316CFFFF05E1FFEC01E0102159
+:1068100024A2003E0002F943019F682A0009702B60
+:1068200001AE40241500FFEB000C18801546000552
+:106830003402FFFF020028210E0005040000382169
+:10684000020010218FBF00148FB0001003E0000879
+:1068500027BD00181520000301601821000B1C0241
+:1068600024080010306A00FF15400005306E000F4C
+:10687000250D000800031A0231A800FF306E000F3A
+:1068800015C00005307F0003251000040003190225
+:10689000320800FF307F000317E00005386900016F
+:1068A0002502000200031882304800FF3869000109
+:1068B0003123000110600004310300FF250A0001AC
+:1068C000314800FF310300FF000C694001A3402163
+:1068D000240A000110CAFFD53110FFFF246E000109
+:1068E00031C800FF1119FFC638C900012D1F002053
+:1068F00053E0001C258B0001240D00010A000597C0
+:10690000240E002051460017258B000125090001A7
+:10691000312800FF2D09002051200012258B000195
+:1069200025430001010D5004014B102425090001ED
+:106930001440FFF4306AFFFF3127FFFF10EE000C18
+:106940002582FFFF304CFFFF000050213410FFFF75
+:10695000312800FF2D0900205520FFF225430001BA
+:10696000258B0001014648260A000551316CFFFFC6
+:1069700000003821000050210A0005A33410FFFF59
+:1069800027BDFFD8AFB0001030F0FFFFAFB100144B
+:10699000001039423211FFE000071080AFB3001C35
+:1069A00000B1282330D3FFFFAFB2001830A5FFFF9E
+:1069B000008090210260302100442021AFBF0020E0
+:1069C0000E00052F3207001F022288213403FFFF2B
+:1069D00002402021020028210260302100003821DD
+:1069E000104300093231FFFF022010218FBF002029
+:1069F0008FB3001C8FB200188FB100148FB000103D
+:106A000003E0000827BD00280E00052F000000004D
+:106A100000408821022010218FBF00208FB3001C6E
+:106A20008FB200188FB100148FB0001003E000087F
+:106A300027BD0028000424003C036000AC603D0832
+:106A400010A00002348210063482101603E0000801
+:106A5000AC623D0427BDFFE0AFB00010309000FFF6
+:106A60002E020006AFBF001810400008AFB100149E
+:106A7000001030803C030800246351F400C3282137
+:106A80008CA400000080000800000000000020210D
+:106A90008FBF00188FB100148FB00010008010213C
+:106AA00003E0000827BD0020979100161620005132
+:106AB000000020213C020800904200330A00060A30
+:106AC00000000000978D001215A000310000202169
+:106AD0000A00060A240200089787001014E0001A32
+:106AE0000000182100602021240200011080FFE92D
+:106AF0008FBF0018000429C20045302100A6582B82
+:106B00001160FFE43C0880003C072000000569C0DC
+:106B100001A76025AD0C00203C0380082402001F63
+:106B20002442FFFFAC6000000441FFFD2463000429
+:106B300024A5000100A6702B15C0FFF5000569C053
+:106B40000A0005F48FBF0018978700083C0408006E
+:106B5000248454B0240504000E0005AF240600016F
+:106B6000978B001024440001308AFFFF2569FFFF46
+:106B70002D4804000040282115000040A78900107E
+:106B800024AC3800000C19C00A000608A7800008D1
+:106B90009787000A3C04080024845530240504002B
+:106BA0000E0005AF2406000197990012244400014D
+:106BB0003098FFFF272FFFFF2F0E04000040882191
+:106BC00015C0002CA78F0012A780000A3A0200030C
+:106BD000262401003084FFFF0E0005DC2C45000157
+:106BE0000011F8C027F00100001021C00A00060AB9
+:106BF000240200089785001A9787000E3C040800BD
+:106C0000248455B00E0005AF2406000197870016B6
+:106C10008F8900182445000130A8FFFF24E3FFFFFF
+:106C20000109302B0040802114C00018A7830016F2
+:106C3000A780000E9785001C0E000E1E020020216A
+:106C4000244A05003144FFFF0E0005DC2405000145
+:106C50003C05080094A500320E000E1E0200202103
+:106C6000244521003C020800904200330A00060A35
+:106C7000000521C00A000642A784000A24AC38009F
+:106C8000000C19C00A000608A78400080A00065C68
+:106C9000A785000E308400FF27BDFFE82C82000688
+:106CA000AFBF0014AFB000101040001500A0382195
+:106CB000000440803C0308002463520C0103282197
+:106CC0008CA40000008000080000000024CC007F9D
+:106CD000000751C2000C59C23170FFFF2547C400A4
+:106CE00030E5FFFF27840008020030210E00050474
+:106CF000240700019786001402062021A7840014AF
+:106D00008FBF00148FB0001003E0000827BD0018EB
+:106D10003C0508008CA50030000779C20E0002E691
+:106D200025E4DF003045FFFF3C040800248455B013
+:106D3000240600010E00050424070001978E0016AA
+:106D40008FBF00148FB0001025CD000127BD0018A3
+:106D500003E00008A78D00160007C9C22738FF000E
+:106D6000001878C231F0FFFF3C040800248455303D
+:106D700002002821240600010E000504240700015A
+:106D8000978D0012260E0100000E840025AC000134
+:106D90003C0B6000A78C0012AD603D083604000675
+:106DA000000030213C0760008CE23D04305F0006AB
+:106DB00017E0FFFD24C9000100061B00312600FF7B
+:106DC000006440252CC50004ACE83D0414A0FFF687
+:106DD0008FBF00148FB0001003E0000827BD00181B
+:106DE000000751C22549C8002406000124070001FC
+:106DF0003C040800248454B00E0005043125FFFF34
+:106E0000978700108FBF00148FB0001024E6000198
+:106E100027BD001803E00008A78600103084FFFF9C
+:106E200030A5FFFF3C0680008CC201B80440FFFE85
+:106E30003C084080008838253C031000ACC001802D
+:106E4000ACC50184ACC7018803E00008ACC301B83D
+:106E50003084FFFF3C0680008CC201B80440FFFE76
+:106E60003C0840388CA70000008828253C0310000F
+:106E7000ACC70180ACC5018803E00008ACC301B811
+:106E80008F8300588F8600501066000B00804021D1
+:106E90003C07080024E755C0000328C000A71021C4
+:106EA0008C44000024630001108800053063000F4B
+:106EB0005466FFFA000328C003E000080000102118
+:106EC0003C07080024E755C400A7302103E0000870
+:106ED0008CC200003C039000346200010082202537
+:106EE0003C038000AC6400208C65002004A0FFFE01
+:106EF0000000000003E00008000000003C028000E9
+:106F0000344300010083202503E00008AC44002046
+:106F100027BDFFE0AFB100143091FFFFAFB000100C
+:106F2000AFBF00181220001200A080218CA5000025
+:106F300014A00011240400023C0680008CC201B899
+:106F40000440FFFE3C074000022720258FBF0018A9
+:106F50008FB100148FB000103C03100027BD00203B
+:106F6000ACC50180ACC4018803E00008ACC301B823
+:106F70000A00071D8CA500000E00067424060200FE
+:106F8000000028210A00071DAE0000003087FFFF27
+:106F90003C0680008CC201B80440FFFE3C0A40065B
+:106FA0008CA9000000EA4025ACC901808CA4000433
+:106FB0003C031000ACC40184ACC8018803E00008A5
+:106FC000ACC301B88F83FD9427BDFFE8AFBF0014A9
+:106FD000AFB00010906700080080102100802821C9
+:106FE00030E600400000202110C000088C50000056
+:106FF0000E00008802002021020020218FBF001413
+:107000008FB000100A00049727BD00180E00073249
+:10701000000000000E000088020020210200202154
+:107020008FBF00148FB000100A00049727BD00180E
+:1070300027BDFFE0AFB000108F90FD94AFBF001CE4
+:10704000AFB20018AFB10014920600010080882191
+:107050000E00070430D2000492040005001129C27A
+:10706000A605000034830040A20300050E00070EB1
+:10707000022020210E000499022020212402000178
+:10708000AE02000C02202821A602001024040002F7
+:10709000A602001224060200A60200140E000674C6
+:1070A000A60200161640000F8FBF001C978C0054DC
+:1070B0003C0B08008D6B00782588FFFF3109FFFF2E
+:1070C000256A0001012A382B10E00006A788005429
+:1070D0003C0F6006240E001635ED0010ADAE0050DA
+:1070E0008FBF001C8FB200188FB100148FB000103A
+:1070F00003E0000827BD002027BDFFE0AFB100146A
+:10710000AFBF0018AFB000101080000400A08821AD
+:107110002402008010820007000000000000000D23
+:107120008FBF00188FB100148FB0001003E000086B
+:1071300027BD00200E00070400A020218F86FD94AB
+:107140000220202190C500050E00070E30B000FF80
+:107150002403003E1603FFF1000000003C05800000
+:107160008CA401780480FFFE240800073C0710006F
+:10717000ACB1014002202021A0A801448FBF00181B
+:107180008FB100148FB00010ACA701780A00075B24
+:1071900027BD002027BDFFE0AFB00010AFBF001833
+:1071A000AFB100143C1080008E11002000000000E0
+:1071B0000E000499AE040020AE1100208FBF00180D
+:1071C0008FB100148FB0001003E0000827BD00202D
+:1071D0003084FFFF3C0680008CC201B80440FFFEF3
+:1071E0003C084035008838253C031000ACC50180C0
+:1071F000ACC00184ACC7018803E00008ACC301B88F
+:107200003084FFFF3C0680008CC201B80440FFFEC2
+:107210003C084036008838253C031000ACC501808E
+:10722000ACC00184ACC7018803E00008ACC301B85E
+:1072300027BDFFD0AFB500243095FFFFAFB60028C3
+:10724000AFB40020AFBF002CAFB3001CAFB200182A
+:10725000AFB10014AFB0001030B6FFFF12A000278E
+:107260000000A0218F9200388E4300003C06800071
+:107270002402004000033E0200032C0230E4007FA1
+:10728000006698241482001D30A500FF8F830048FB
+:107290002C68000A510000108F86003000035880CF
+:1072A0003C0C0800258C5228016C50218D490000AF
+:1072B000012000080000000002D4702131C5FFFF4A
+:1072C0000E0006D624040084166000028F92003857
+:1072D000AF8000488F860030264F002026890001AD
+:1072E00001E090213134FFFF14C00004AF8F00385B
+:1072F0000295282B14A0FFDC000000000280102162
+:107300008FBF002C8FB600288FB500248FB40020CB
+:107310008FB3001C8FB200188FB100148FB0001013
+:1073200003E0000827BD00302407003414A70146FD
+:10733000000000009247000E8F98FD988F90FD94FA
+:10734000240F1600A30700199244000D3C0880008A
+:107350003C07800CA3040018965F00123C096000F3
+:107360003C117FFFA61F005C965900103622FFFFDC
+:10737000240400053325FFFFAE0500548E46001C93
+:10738000AD0F00288CEE00008D2D444801C6182654
+:1073900001A33021AE0600388E0C003824CA00014B
+:1073A0003C0D7F00AE0C003C8E0B003CAF0B00048C
+:1073B000AE0A00208E130020AE13001CA300001B99
+:1073C000AE02002CA30400128E5F001424130050A0
+:1073D000AE1F00348E190034AF1900148E4500180A
+:1073E000AE050048924F000CA20F004E9209000813
+:1073F000352E0020A20E00088E030018006D6024B8
+:10740000358B4000AE0B0018920A0000315200FF8D
+:10741000125302A62413FF803C0408002484564023
+:107420000E00074000000000240C000424080001A6
+:107430003C0508008CA556403C048000A20C0025A9
+:10744000A20800058C9001780600FFFE8F9200389C
+:10745000240D00023C031000AC850140A08D0144C6
+:10746000AC8301780A000804AF8000482CAD0037D7
+:1074700011A0FF998F860030000580803C11080024
+:1074800026315250021178218DEE000001C0000813
+:10749000000000002410000414B0008E3C0780009F
+:1074A0003C0B08008D6B56408F86FD94ACEB0020A2
+:1074B0008E4300088F8FFD98240E0050ACC300301F
+:1074C0008E4A0008ACCA00508E42000CACC2003498
+:1074D0008E440010ACC400388E5F0010ACDF005446
+:1074E0008E590014ACD9003C8E580018ADF8000439
+:1074F0008E51001CACD1002090C5000030A900FFC7
+:10750000112E0276000000008CC500348CD10030B2
+:1075100000B1302304C000F32404008C126000F09A
+:10752000240200030A000804AF820048240F00056B
+:1075300014AF00683C0B80003C0308008C6356408D
+:107540008F86FD94AD6300208E4A00048F99FD98CC
+:1075500024072000ACCA001C924200082412000834
+:10756000A32200198F840038909F0009A33F0018C0
+:107570008F85003890B8000A330400FF1092001085
+:10758000288C0009158000BC24080002240E00206D
+:10759000108E000B34078000288900211520000878
+:1075A0002407400024110040109100053C07000111
+:1075B000240F0080108F00023C07000224074000C7
+:1075C0008CDF00183C04FF0003E4C8240327C02517
+:1075D000ACD8001890B2000BA0D200278F830038DF
+:1075E0009465000C10A0022A000000009467000CB3
+:1075F0003C198000240BFFBFA4C7005C9062000E02
+:1076000024070004A0C200088F840038909F000F58
+:10761000A0DF00098F8C00388D9200108F38007425
+:1076200002582823ACC500588D8F0014ACCF002C15
+:10763000959100183229FFFFACC90040958E001AC1
+:1076400031D0FFFFACD000448D8D001CACCD004884
+:1076500095880002A4C800789183000EA0C300089A
+:1076600090CA0008014B1024126001D4A0C2000887
+:107670008F9200380A000804AF87004824060006ED
+:1076800014A600143C0D80003C1008008E105640DB
+:107690008F8CFD90ADB000208E4800188F86FD9431
+:1076A0008F8AFD98AD8800008CC300382404000543
+:1076B000AD8300048CCB003C12600081AD4B000018
+:1076C0000A000804AF840048240E000710AE004BE7
+:1076D000240400063C05080024A556400E000713AC
+:1076E000240400818F9200380013102B0A00080434
+:1076F000AF8200482419002314B9FFF63C0B800028
+:107700003C0C08008D8C56408F8AFD98AD6C002093
+:107710008F91FD948E4600042544002026450014D8
+:10772000AE260028240600030E000E2A2550003045
+:107730008F87003802002021240600030E000E2A45
+:1077400024E500083C040800248456400E0007404D
+:107750000000000092220000241F0050304400FF6F
+:10776000549FFFE18F9200380E000E1500000000BC
+:107770000A0009098F9200382403003314A3003251
+:107780003C0280003C1108008E3156408F8EFD98DF
+:10779000AC5100208E440008240900288F88FD94F5
+:1077A000ADC400308E5F000C24060009ADDF00344C
+:1077B0008E590010ADD900388E580014ADD8002075
+:1077C0008E450018ADC500248E4F001CADCF00289B
+:1077D000A1C900118E4D000412600031AD0D0028CA
+:1077E0008F9200380A000804AF860048240900225E
+:1077F00014A9FFB800000000240400073C0F080093
+:107800008DEF56403C118000AE2F00205660FEB137
+:10781000AF8400483C040800248456400E00074012
+:10782000241300508F98FD9493120000324500FFFE
+:1078300010B30169000000008F9200380000202181
+:107840000A000804AF8400483C05080024A55640FF
+:107850000E0006E3240400810A0009098F92003813
+:1078600002D498213265FFFF0E0006D6240400845E
+:107870000A0008048F9200381088FF512407040082
+:107880002887000310E001A324100004240D000148
+:10789000548DFF4B240740000A0008BF2407010055
+:1078A0003C05080024A556400E000732240400823F
+:1078B0008F920038000030210A000804AF8600488B
+:1078C0003C040800248456408CC200380E00074057
+:1078D0008CC3003C8F9200380A00095F0000202111
+:1078E000240400823C05080024A556400E000732FF
+:1078F000000000008F920038000010210A000804E8
+:10790000AF8200488E5000048F91FD943C0A8000A5
+:10791000AD500020922200050200282130460002CE
+:1079200014C001802404008A8F92FD98020028214F
+:107930002404008D924B001B3163002014600179F8
+:1079400000000000922D0009240C001231A800FF55
+:10795000110C0174240400810E0007040200202190
+:107960009245001B240E00040200202134A900428D
+:10797000A249001B0E00070EA22E00253C04800029
+:107980008C9101780620FFFE24180002AC90014083
+:10799000A09801448F9200383C0F1000AC8F017802
+:1079A0000A00090A0013102B8E5000048F91FD94D9
+:1079B0003C1F8000AFF00020923900050200282112
+:1079C0003327000214E000172404008A92240009DF
+:1079D0002412000402002821308600FF10D200117A
+:1079E000240400810E000704020020218F8CFD98E2
+:1079F000240B00122403FFFE918D001B02002021A6
+:107A000035A80020A188001BA22B0009922A00059E
+:107A1000014310240E00070EA222000502002821B7
+:107A2000000020210E0007CF000000000A00090915
+:107A30008F9200388E5100043C0280003C100800F8
+:107A400026105640AC5100203C010800AC31564095
+:107A50009246000330C40004108001658F84FD94B9
+:107A600024020006A0820009924D001B2408FFC0DA
+:107A700031AC003F01885825A08B000892430003D9
+:107A8000306A00011540015C000000008E420008D1
+:107A9000AE0200083C0208008C4256481040015BD0
+:107AA0008F8EFD98000281C28F85FD94A5D0000CB9
+:107AB0008E5F000C240F000124090014ADDF002CA0
+:107AC0008E590010ADD9001C96470016A5C7003C82
+:107AD00096580014A5D8003EACAF000CA4AF00101F
+:107AE000A4AF0012A4AF0014A4AF00161260015F8F
+:107AF000A1C9001192440003309200022E530001EC
+:107B00008F920038266200080A000804AF820048FD
+:107B10008E4600043C0580003C048008ACA6002092
+:107B20008E4700089089000024110050312200FF88
+:107B3000105100B8240500883C0480008C8F01B8E7
+:107B400005E0FFFE0013802B3C18400900B810250B
+:107B5000AF9000483C101000AC860180AC870184D7
+:107B6000AC820188AC9001B80A0008058F8600300D
+:107B70008E4500043C0680003C098008ACC500200E
+:107B8000913F00002404005033F900FF132400B09B
+:107B9000240600883C0480008C8A01B80540FFFE62
+:107BA0003C0E400E00CE68253C081000AC850180DC
+:107BB000AC800184AC8D0188AC8801B8912B0000A9
+:107BC000240CFF8024040004016C182524060030D6
+:107BD0000E000674A12300000A0009098F920038E4
+:107BE0008E5000048F91FD983C0F8000ADF0002076
+:107BF0009225001B30A900101120007C2403008175
+:107C00003C0480008C8701B804E0FFFE3C1F401F4D
+:107C1000AC900180007F10250013C82B3C10100091
+:107C2000AC800184AF990048AC820188AC9001B867
+:107C30000A0008058F8600308E44001C0E0006EFF7
+:107C400000000000104000F8004038218F920038FA
+:107C5000240600893C0580008CAE01B805C0FFFEFB
+:107C600000000000ACA701808E50001C3C114001B8
+:107C70000013782B00D138253C131000ACB00184E0
+:107C8000AF8F0048ACA70188ACB301B80A00080563
+:107C90008F860030965900023C100800261056408E
+:107CA00033380004130000A33C0460008E5F001C06
+:107CB0003C068000ACDF00203C010800AC3F564091
+:107CC000964F000231E7000114E000E300000000DD
+:107CD0008E420004AE0200083C1008008E10564888
+:107CE000120000D93C0680008F85FD94241000010D
+:107CF0008CBF00188F91FD988F89FD9003E6C825F1
+:107D0000ACB90018A0A00005ACB0000C3C180800ED
+:107D10008F1856488F870038A4B00010001879C219
+:107D2000A4B00012A4B00014A4B00016A62F000C3A
+:107D30008CEE00088F8D00388F8C0038AE2E002C12
+:107D40008DA8000C24070002AE28001C918B0010A7
+:107D5000A22B00118F830038906A0011A12A00081D
+:107D60008F82003890440012A0A4004E8F920038F9
+:107D700092460013A22600128F920038965F0014DC
+:107D8000A63F003C96590016A639003E8E580018B2
+:107D9000AE3800145660FD4FAF8700483C05080020
+:107DA00024A556400E000713000020218F920038B2
+:107DB000000038210A000804AF8700483C0508008D
+:107DC00024A556400E000732240400828F9200380A
+:107DD0000A0008EC000038210E000E15000000001B
+:107DE0008F9200380A00095F000020210E0007046E
+:107DF000020020219232001B020020213658001080
+:107E00000E00070EA238001B8F9200380A000A4F9E
+:107E1000000018219243000C306A00011140000359
+:107E200000000000964B000EA48B002C9248000C22
+:107E3000310C00021180FF4000002821964E0012F4
+:107E40008E4D0014A48E001A0A000A1DAC8D001C71
+:107E50008F8300588F8700501067FF4E000030213D
+:107E60003C080800250855C4000320C000883021C4
+:107E70008CD10000122500C8246200013043000F9D
+:107E80001467FFFA000320C00A000A340000302102
+:107E90003C05080024A556400E0007322404008B40
+:107EA0008F9200380A0008EC0013382B3C0B0800B6
+:107EB0008D6B564024D8FFFE25710100322A007FC9
+:107EC0000147902102331024AD020028AE4600D0B5
+:107ED000AE4000D40A000855AE58001CACC0005497
+:107EE0003C0E08008DCE56403C09800C352C01001C
+:107EF000ACEE00288E500014AD9000D08E4D0014D2
+:107F0000AD8D00D48E4800102507FFFE0A000891B1
+:107F1000AD87001C5490FDAA240740000A0008BF4A
+:107F2000240710000E0007C3000000000A00090922
+:107F30008F9200388C83442C3C05DEAD34B2BEEF0A
+:107F40003C010800AC205640107200900000000078
+:107F50003C046C62348279701462000824040002CC
+:107F6000978A00549783004C020028210143482B34
+:107F70001120001924040092240400020E0005E4DC
+:107F8000240502003C0B8000AD6200203C0108008B
+:107F9000AC2256401040000D8F8E0038240C002873
+:107FA0002404000391CD001031A800FF550C0001FE
+:107FB000240400010E00004C0000000010400004EA
+:107FC000240400830A000A7F8F920038240400836F
+:107FD0003C05080024A556400E00071300000000D1
+:107FE0008F9200380013382B0A000804AF8700482E
+:107FF0000A0009E8240200128E4400080E0006EF71
+:10800000000000000A0009F4AE0200083C05080068
+:1080100024A556400E0006E3240400878F92003802
+:108020000A000A110013102B240400040E0005E4BA
+:108030002405003014400014004038218F9200388D
+:108040000A000A64240600833C05080024A5564063
+:108050000A000B45240400878E4400040E0006EF3E
+:10806000000000000A000A85AE0200083C05080076
+:1080700024A556400E000732240400828F92003857
+:108080000A000A11000010218F9200383C08800875
+:108090003C0C8000240B0050240A0001AD8200201B
+:1080A000A10B0000A10A000192490004A1090018D7
+:1080B00092440005A1040019924300063C04080004
+:1080C000248455C4A103001A924200073C0308000F
+:1080D000246355C0A102001B92450008A105001CA5
+:1080E00092460009A106001D925F000AA11F001E12
+:1080F0009259000BA119001F9258000CA1180020E2
+:108100009251000DA11100219250000EA1100022E9
+:10811000924F000FA10F0023924E0010A10E0024D9
+:10812000924D0011A10D0025964C0014A50C0028BD
+:10813000964B00168F8A00508F980058A50B002A86
+:1081400096490018000A10C025450001A509002C19
+:108150008E46001C0044C8210043F82130A5000FC2
+:10816000AFE60000AF27000010B80003AF85005055
+:108170000A000A640000302124AD000131A8000F7C
+:10818000000030210A000A64AF8800588C83442C18
+:108190000A000B243C046C623C07080024E755C02D
+:1081A00000879021ACC00000000030210A000A3492
+:1081B000AE4000003C0482013C03600034820E02A9
+:1081C000AC603D68AF80007803E00008AC623D6CB5
+:1081D00027BDFFE8AFB000103090FFFF001018423D
+:1081E0002C620041AFBF0014144000022404008040
+:1081F000240300403C010800AC3000603C01080052
+:10820000AC2300640E000E1E00602821244802BF2B
+:108210002409FF8001092824001039800010304013
+:108220008FBF00148FB0001000A7202100861821F6
+:10823000AF8300603C010800AC2500583C010800F9
+:10824000AC24005C03E0000827BD0018308300FF69
+:1082500030C6FFFF30E400FF3C0880008D0201B80B
+:108260000440FFFE00035400014438253C0960002F
+:1082700000E920253C031000AD050180AD06018416
+:10828000AD04018803E00008AD0301B88F86003813
+:108290003C096012352700108CCB00043C0C600EAA
+:1082A00035850010316A00062D480001ACE800C495
+:1082B0008CC40004ACA431808CC2000894C30002BA
+:1082C000ACA2318403E00008A78300708F850038DA
+:1082D0008F87FF208F86FF288CAE00043C0F601232
+:1082E00035E80010ACEE00688CAD0008ACED006C19
+:1082F0008CAC0010ACCC004C8CAB000CACCB004870
+:1083000094CA00543C0208008C42004425490001F4
+:10831000A4C9005494C400543083FFFF10620017B6
+:10832000000000003C0208008C420040A4C2005241
+:108330008CA30018ACE300308CA20014ACE2002C3B
+:108340008CB90018ACF900388CB800142405000171
+:10835000ACF800348D0600BC50C500198D0200B485
+:108360008D0200B8A4E2004894E40048A4E4004A66
+:1083700094E800DA03E000083102FFFF3C02080045
+:108380008C420024A4C00054A4C200528CA3001844
+:10839000ACE300308CA20014ACE2002C8CB90018C5
+:1083A000ACF900388CB8001424050001ACF8003496
+:1083B0008D0600BC54C5FFEB8D0200B88D0200B4E1
+:1083C000A4E2004894E40048A4E4004A94E800DAF7
+:1083D00003E000083102FFFF8F8600383C04800074
+:1083E0008CC900088CC80008000929C0000839C0E1
+:1083F000AC87002090C30007306200041040003AB0
+:10840000AF85007490CB0007316A00081140003935
+:108410008F87FF248CCD000C8CCE001401AE602B16
+:1084200011800032000000008CC2000CACE2007031
+:108430008CCB00188F85FF208F88FF28ACEB007451
+:108440008CCA00102402FFF8ACAA00C88CC9000C2A
+:10845000AD0900608CC4001CACA400C090E3007C9B
+:108460000062C824A0F9007C90D80007330F0008F0
+:1084700011E000040000000090ED007C35AC00012C
+:10848000A0EC007C90CF000731EE000111C0000984
+:108490000000000090E4007C2418000234820002F6
+:1084A000A0E2007C90A300EC307900FF13380013A9
+:1084B0002408003490C900073126000210C00004CF
+:1084C0000000000090EB007C356A0004A0EA007C0C
+:1084D00090ED007D31AC003FA0EC007D94A700DA68
+:1084E00003E0000830E2FFFF8F87FF240A000C5AE8
+:1084F0008CC200140A000C5BACE000700A000C7C1B
+:10850000ACA800CC8F8C003827BDFFD8AFB3001CBF
+:10851000AFB20018AFB00010AFBF0020AFB1001471
+:10852000918F00153C13600E3673001031EB000F75
+:10853000A38B007C8D8F00048D8B0008959F00120B
+:10854000959900109584001A9598001E958E001C30
+:1085500033EDFFFF332AFFFF3089FFFF3308FFFFB2
+:1085600031C7FFFF3C010800AC2D00243C0108008E
+:10857000AC2900443C010800AC2A0040AE683178C8
+:10858000AE67317C91850015959100163C12601202
+:108590003652001030A200FF3230FFFFAE62318849
+:1085A000AE5000B491830014959F0018240600017A
+:1085B0000066C80433F8FFFFAE5900B8AE5800BCDF
+:1085C000918E0014AF8F00643C08600631CD00FF2F
+:1085D000AE4D00C0918A00159584000E3C07600ADC
+:1085E000314900FFAF8B00683084FFFFAE4900C8FF
+:1085F000351100100E000BC334F004103C020800CB
+:108600008C4200603C0308008C6300643C06080058
+:108610008CC600583C0508008CA5005C8F84006067
+:108620008FBF0020AE23004CAE65319CAE030054DA
+:10863000AE4500DCAE6231A0AE6331A4AE663198C7
+:10864000AE2200488FB3001CAE0200508FB1001460
+:10865000AE4200E0AE4300E4AE4600D88FB000105A
+:108660008FB200180A0004CC27BD0028978500723D
+:108670009783005C27BDFFE8AFB0001000A3102B6C
+:10868000AFBF0014240400058F900038104000553F
+:10869000240900020E0005E48F850060AF8200749B
+:1086A000240400031040004F240900023C0680000F
+:1086B0000E00004CACC2002024070001240820005A
+:1086C0001040004D24040005978E00728F8AFF240D
+:1086D0002409005025C50001A7850072A1490000AA
+:1086E0003C0D08008DAD0064240380008F84FF20C2
+:1086F000000D6600AD4C0018A5400006954B000A21
+:108700008F85FF282402FF8001633024A546000ADC
+:10871000915F000A0000482103E2C825A159000A20
+:10872000A0A00008A140004CA08000C5961800023F
+:10873000978300703C020004A49800DA960F0002B0
+:108740002418FFBF25EE2401A48E00AE8E0D000478
+:10875000ACAD00448E0C0008ACAC0040A4A00050AE
+:10876000A4A000548E0B000C240C0030AC8B00280D
+:108770008E060010AC860024A480003EA487004E24
+:10878000A4870050A483003CAD420074AC8800C8AC
+:10879000ACA80060A08700EC909F00C433F9007F74
+:1087A000A09900C4909000C402187824A08F00C43F
+:1087B000914E007C35CD0001A14D007C938B007C57
+:1087C000AD480070AC8C00CCA08B00C68F880068D0
+:1087D0008F870064AC8800B4AC8700B8A5400078EF
+:1087E000A540007A8FBF00148FB000100120102127
+:1087F00003E0000827BD00188F8500740E00067482
+:108800008F8600600A000D482409000227BDFFE0A2
+:10881000AFB000108F900038AFB10014AFBF001898
+:108820008E0900040E000499000921C08E0800047E
+:108830008F84FF208F82FF28000839C03C0680000B
+:10884000ACC70020948500DA904300131460001C2C
+:1088500030B1FFFF8F8CFF24918B0008316A0040FC
+:108860001540000B000000008E0D00040220302196
+:108870008FBF00188FB100148FB0001024040022A5
+:1088800000003821000D29C00A000BE227BD00209E
+:108890000E000063000000008E0D00040220302155
+:1088A0008FBF00188FB100148FB000102404002275
+:1088B00000003821000D29C00A000BE227BD00206E
+:1088C0000E00005B000000008E0D0004022030212D
+:1088D0008FBF00188FB100148FB000102404002245
+:1088E00000003821000D29C00A000BE227BD00203E
+:1088F00027BDFFE0AFB200183092FFFFAFB000100D
+:10890000AFBF001CAFB100141240001E0000802158
+:108910008F8600388CC500002403000600053F0246
+:108920000005140230E4000714830016304500FFF0
+:108930002CA8000611000040000558803C0C0800DF
+:10894000258C532C016C50218D490000012000081A
+:10895000000000008F8E0078240D000111CD005022
+:1089600024020002AF820078260900013130FFFFA7
+:1089700024C800200212202B010030211480FFE5C2
+:10898000AF880038020010218FBF001C8FB2001882
+:108990008FB100148FB0001003E0000827BD002045
+:1089A0009387005E54E00034000030210E000C90EC
+:1089B000000000008F8600380A000DA82402000184
+:1089C0008F8700782405000210E50031240400138D
+:1089D0000000282100003021240700010E000BE2D6
+:1089E000000000000A000DA98F8600388F830078F0
+:1089F000240200021462FFF6240400120E000C454B
+:108A0000000000008F850074004030212404001213
+:108A10000E000BE2000038210A000DA98F860038F5
+:108A20008F8300782411000310710029241F000295
+:108A3000107FFFCE26090001240400100000282129
+:108A4000000030210A000DC6240700018F91007834
+:108A5000240600021626FFF9240400100E000CEA7A
+:108A600000000000144000238F9800388F860038E3
+:108A70000A000DA824020003240400140E000BE2D7
+:108A8000000028218F8600380A000DA82402000269
+:108A90000E000D52000000000A000DA98F8600385C
+:108AA0000E000BF200000000241900022404001440
+:108AB000000028210000302100003821AF99007803
+:108AC0000E000BE2000000000A000DA98F8600389E
+:108AD0000E000C02000000008F85007424190002B3
+:108AE0000040302124040010000038210A000DFF4E
+:108AF000AF9900780040382124040010970F00023D
+:108B0000000028210E000BE231E6FFFF8F860038BF
+:108B10000A000DA9AF9100788F84FF243C077FFFE6
+:108B200034E6FFFF8C8500182402000100A61824FB
+:108B3000AC83001803E00008A08200053084FFFF2A
+:108B400030A5FFFF108000070000182130820001CF
+:108B50001040000200042042006518211480FFFB31
+:108B60000005284003E000080060102110C0000745
+:108B7000000000008CA2000024C6FFFF24A5000412
+:108B8000AC82000014C0FFFB2484000403E0000852
+:108B90000000000010A0000824A3FFFFAC86000026
+:108BA00000000000000000002402FFFF2463FFFF1C
+:108BB0001462FFFA2484000403E0000800000000AF
+:108BC000000411C003E000082442024027BDFFE872
+:108BD000AFB0001000808021AFBF00140E000E3F28
+:108BE00000A0202100504821240AFF808FBF0014DC
+:108BF0008FB00010012A30243127007F3C08800A02
+:108C00003C04210000E8102100C428253C0380001A
+:108C100027BD0018AC650024AF820024AC400000E2
+:108C2000AC65002403E00008AC4000403C0D0800A7
+:108C30008DAD005800056180240AFF8001A45821F1
+:108C4000016C4821012A30243127007F3C08800C28
+:108C50003C04210000E8102100C428253C038000CA
+:108C6000AC650028AF82002003E00008AC4000247F
+:108C700030A5FFFF3C0680008CC201B80440FFFE17
+:108C80003C08601500A838253C031000ACC40180E6
+:108C9000ACC00184ACC7018803E00008ACC301B8D4
+:108CA0003C0D08008DAD005800056180240AFF804E
+:108CB00001A45821016C4021010A482400093140D7
+:108CC0003107007F00C728253C04200000A4182598
+:108CD0003C028000AC43083003E00008AF80002075
+:108CE00027BDFFE8AFB0001000808021AFBF0014A7
+:108CF0000E000E3F00A0202100504821240BFF80D1
+:108D0000012B5024000A39403128007F3C06200006
+:108D10008FBF00148FB0001000E8282534C2000176
+:108D200000A218253C04800027BD0018AC83083041
+:108D300003E00008AF8000243C0580088CA7006099
+:108D40003C0680080087102B144000112C83400043
+:108D50008CA800602D0340001060000F2403400029
+:108D60008CC900600089282B14A000020080182103
+:108D70008CC3006000035A42000B30803C0A08009C
+:108D8000254A53A000CA202103E000088C8200007D
+:108D90001460FFF32403400000035A42000B3080AC
+:108DA0003C0A0800254A53A000CA202103E000081D
+:108DB0008C8200003C05800890A6000893840088FF
+:108DC00024C20001304200FF3043007F1064000CD9
+:108DD00000023827A0A200083C0480008C8501789E
+:108DE00004A0FFFE8F8A0080240900023C081000C6
+:108DF000AC8A0140A089014403E00008AC880178F6
+:108E00000A000EC430E2008027BDFFD8AFB20018C0
+:108E10008F920084AFBF0020AFB3001CAFB0001032
+:108E2000AFB100148F9300208E5900283C100080B1
+:108E30003C0EFFEFAE7900008E580024A260000ABD
+:108E400035CDFFFFAE7800049251002C3C0BFF9F04
+:108E5000356AFFFFA271000C8E6F000C3C080040C9
+:108E6000A271000B01F06025018D4824012A3824ED
+:108E700000E83025AE66000C8E450004AE60001898
+:108E80003C0400FFAE6500148E43002C3482FFFFCB
+:108E9000A66000080062F824AE7F00108E5900081A
+:108EA0008F900080964E0012AE7900208E51000CFB
+:108EB00031D83FFF00187980AE7100248E4D001428
+:108EC00001F0602131CB0001AE6D00288E4A001800
+:108ED000000C41C2000B4B80AE6A002C8E46001C79
+:108EE00001093821A667001CAE66003096450002D5
+:108EF0008E440020A665001EAE6400349243003309
+:108F00003062000454400006924700003C02800892
+:108F1000344301008C7F00C0AE7F003092470000D8
+:108F20008F860024A0C700309245003330A4000291
+:108F300050800007925100018F880024240BFF808D
+:108F4000910A0030014B4825A109003092510001DF
+:108F50008F900024240CFFBF2404FFDFA2110031F6
+:108F60008F8D00243C1880083711008091AF003CA1
+:108F700031EE007FA1AE003C8F890024912B003C94
+:108F8000016C5024A12A003C8F9F00248E6800149D
+:108F900093E6003C2D0700010007114000C428247F
+:108FA00000A21825A3E3003C8F87002496590012E5
+:108FB000A4F900328E450004922E007C30B00003EC
+:108FC0000010782331ED000300AD102131CC0002F8
+:108FD0001580000224460034244600303C028008FC
+:108FE00034430080907F007C00BFC82433380004E5
+:108FF0001700000224C2000400C010218F98002432
+:1090000024190002ACE20034A3190000924F003F83
+:109010008F8E00243C0C8008358B0080A1CF00018E
+:109020008F910024924D003F8E440004A62D000233
+:10903000956A005C0E000E9D3150FFFF00024B80D0
+:10904000013038253C08420000E82825AE25000400
+:109050008E4400388F850024ACA400188E4600345E
+:10906000ACA6001CACA0000CACA00010A4A0001486
+:10907000A4A00016A4A00020A4A00022ACA000245C
+:109080008E62001450400001240200018FBF0020B6
+:109090008FB3001C8FB200188FB100148FB0001076
+:1090A000ACA200080A000EBC27BD002827BDFFC8DF
+:1090B0003C05800834A40080AFBF0034AFBE003050
+:1090C000AFB7002CAFB60028AFB50024AFB4002076
+:1090D000AFB3001CAFB20018AFB10014AFB00010B6
+:1090E000948300789482007A104300512405FFFF96
+:1090F0000080F0210A000FCC0080B821108B004DB9
+:109100008FBF00348F8600803C1808008F18005CE9
+:109110002411FF803C1680000306782101F1802491
+:10912000AED0002C96EE007A31EC007F3C0D800E24
+:1091300031CB7FFF018D5021000B4840012AA8212F
+:1091400096A400003C0808008D0800582405FF8004
+:1091500030953FFF01061821001539800067C821AE
+:109160000325F8243C02010003E290253338007FF8
+:109170003C11800CAED20028031190219250000DBA
+:10918000320F000411E0003702E0982196E3007AE4
+:1091900096E8007A96E5007A2404800031077FFF84
+:1091A00024E3000130627FFF00A4F82403E2C82515
+:1091B000A6F9007A96E6007A3C1408008E940060C6
+:1091C00030D67FFF12D400C1000000008E58001876
+:1091D0008F84008002A028212713FFFF0E000E7746
+:1091E000AE53002C97D5007897D4007A12950010D2
+:1091F000000028213C098008352401003C0A800831
+:1092000091480008908700C53114007F30E400FFCA
+:109210000284302B14C0FFB9268B0001938E008886
+:10922000268C0001008E682115ACFFB78F86008068
+:109230008FBF00348FBE00308FB7002C8FB6002850
+:109240008FB500248FB400208FB3001C8FB200189C
+:109250008FB100148FB0001000A0102103E00008AF
+:1092600027BD003800C020210E000E4202802821B8
+:109270008E4B00108E4C00308F8400242409000295
+:10928000016C5023AE4A0010A089000096E3005CF8
+:109290008E4400308F9100240E000E9D3070FFFF31
+:1092A00000024380011028253C07420000A710253A
+:1092B000AE2200048E5F00048F8A00248E590000C5
+:1092C000240B0008AD5F001CAD590018AD40000C28
+:1092D000AD4000109246000A240400052408C00096
+:1092E00030D000FFA550001496580008A55800166D
+:1092F0009251000A3C188008322F00FFA54F002031
+:10930000964E000837110100A54E0022AD40002402
+:10931000924D000B31AC00FFA54C0002A14B0001A7
+:109320008E4900308F830024240BFFBFAC690008F6
+:10933000A06400308F9000242403FFDF96070032E2
+:1093400000E8282400B51025A6020032921F003242
+:1093500033F9003F37260040A20600328F8C0024EC
+:10936000AD8000348E2F00C0AD8F0038918E003C50
+:109370003C0F7FFF31CD007FA18D003C8F84002406
+:1093800035EEFFFF908A003C014B4824A089003C49
+:109390008F85002490A8003C01033824A0A7003C3E
+:1093A0008E4200348F9100243C038008AE2200409E
+:1093B0008E59002C8E5F0030033F3023AE260044D0
+:1093C000923000483218007FA23800488F8800246D
+:1093D0008E4D00308D0C004801AE5824019650246B
+:1093E000014B4825AD0900489244000AA104004CF5
+:1093F000964700088F850024A4A7004E8E500030A9
+:109400008E4400300E0002E68C65006092F9007C0C
+:109410000002F940004028210002110003E230213F
+:109420003336000212C00003020680210005B0801E
+:1094300002168021926D007C31B30004126000029C
+:1094400000057080020E80218E4B003024058000C4
+:10945000316A0003000A4823312400030204182162
+:109460008F900024AE03003496E4007A96E8007AE8
+:1094700096F1007A31077FFF24E20001305F7FFF21
+:109480000225C824033F3025A6E6007A96F8007A24
+:109490003C1208008E520060330F7FFF11F200185B
+:1094A000000000008F8400800E000E7702A02821AB
+:1094B0008F8400800E000E87028028210E000EBCD3
+:1094C000000000000A000FC80000000096F1007ABA
+:1094D00002248024A6F0007A92EF007A92EB007AC0
+:1094E00031EE00FF000E69C2000D6027000C51C074
+:1094F0003169007F012A20250A000FC2A2E4007A08
+:1095000096E6007A00C5C024A6F8007A92EF007AA9
+:1095100092F3007A31F200FF001271C2000E682748
+:10952000000DB1C0326C007F01962825A2E5007ABB
+:109530000A0010798F8400803C0380003084FFFF94
+:1095400030A5FFFFAC640018AC65001C03E0000808
+:109550008C62001427BDFFA83C068008AFBE0050F7
+:10956000AFBF0054AFB7004CAFB60048AFB5004432
+:10957000AFB40040AFB3003CAFB20038AFB100347D
+:10958000AFB0003034C80100910500C590C7000895
+:10959000309EFFFF30A500FF30E2007F0045182A13
+:1095A000A7A00014A7A0001E10600053AFA00010D9
+:1095B00090C900083126007F00A620232493FFFFD6
+:1095C0000013802B001E882B0211782451E00084A8
+:1095D0008FB300103C19800897360052973700501F
+:1095E000001EC40002D7A8230015A4000014140311
+:1095F00003C2902A1640000200182C0300402821C4
+:10960000001314000002240300A4F82A57E000010C
+:1096100000A0202128830009146000020080A021FE
+:10962000241400083C0A80088D4500480014498035
+:109630008D48004C3C0380003124FFFF3C060010A5
+:109640000086382534710400AC650038AF91008481
+:10965000AC68003CAC670030000000000000000077
+:1096600000000000000000000000000000000000FA
+:1096700000000000000000008C6C0000318B002016
+:109680001160FFFD0014682A01B010241040003959
+:109690000000A8213C16800892D700083C128000E8
+:1096A0008E44010032F6007F0E000E4202C02821D7
+:1096B0008E2F00108E4401000000902131F73FFFF3
+:1096C0000E000E5A02E02821922E000031C2003F07
+:1096D0002C50000852000010000088210002F88081
+:1096E0003C0308002463535403E3C8218F3800006F
+:1096F000030000080000000090CE0008938B008853
+:1097000031CD007F00AD6023016C50210A0010BFF5
+:109710002553FFFF000088213C1080008E040100CB
+:109720000E000E7702E028218E0401000E000E8745
+:1097300002C028211220000F0013802B8F8A008482
+:1097400026A900010009AC00027298230015AC03A1
+:109750002545004002B4B02A0013802B24170001D5
+:1097600000A0882102D01024AF8500841440FFC9D6
+:10977000AFB700103C07800894F100503C05800012
+:109780003C06002002B1C821A4F90050ACA600306C
+:1097900094F4005094E3005203D560231074001D2C
+:1097A000319EFFFF8CE5004C8CE90048001561807C
+:1097B00000ACB0210000A02102CCA82B0134502124
+:1097C0000155B821ACF6004CACF70048001E882BC0
+:1097D0000211782415E0FF803C1980088FB3001037
+:1097E0008FBF00548FBE00503A6200018FB7004C0B
+:1097F0008FB600488FB500448FB400408FB3003C53
+:109800008FB200388FB100348FB0003003E0000811
+:1098100027BD005894F200548CEF0044325FFFFEE5
+:10982000001FC0C001F87021ACAE003C8CEB0044BE
+:109830008CAD003C016D40231900003B000000008E
+:109840008CE20040244200013C07005034E4001048
+:109850003C038000ACA20038AC6400300000000083
+:1098600000000000000000000000000000000000F8
+:109870000000000000000000000000008C760000E6
+:1098800032D7002012E0FFFD3C11800896280054DA
+:109890003C0A80003C06800831190001001960C0B4
+:1098A000018AA0218E8304003C0708008CE7004455
+:1098B0003C150020ACC300488E8904042405000137
+:1098C000ACC9004C10E50259AD550030963F00522E
+:1098D0003C0508008CA5004000BFC021A6380052FE
+:1098E000962F005425EE0001A62E00549626005413
+:1098F00030C4FFFF5487FF34001E882B30A5FFFFC4
+:109900000E00109DA62000543C0408008C84002406
+:10991000962700520044102300E29023A632005202
+:109920000A0010C1001E882B8CE200400A00116260
+:109930003C07005092280001240700013102007FFB
+:109940001447001C97AC001E8E2A0014240BC00084
+:1099500031443FFF018B48243C0608008CC6006060
+:109960000124282530A43FFF0086882B12200011F7
+:10997000A7A5001E3C1108008E3100588F82008080
+:10998000000441802407FF80022218210068F8218A
+:1099900003E7C82433EF007F3C1880003C12800EA0
+:1099A000AF19002C01F2682191AE000D35D00004F2
+:1099B000A1B0000D0E000ED12412000124110001EF
+:1099C0003C1080008E0401000E000E7702E028217A
+:1099D0008E0401000E000E8702C028211620FF58B9
+:1099E0008F8A00840A00112C0013802B8F8600843C
+:1099F00090C900013125002010A0018A2410000127
+:109A00003C048008348C0080918B007C8F91002076
+:109A100000009021316A00011140000FAFB000201A
+:109A20008CD000148C8E0060020E682B15A00003F1
+:109A3000020038218C8700603C0480083483008059
+:109A40008C72007000F2782B15E0000200E02021FB
+:109A50008C640070008090213C07800834E5008011
+:109A60008CD900148CBF0070033FC02B170000027C
+:109A7000032020218CA400700092182310600003A2
+:109A8000AFA3002824080002AFA800208FA5002063
+:109A90000265102B144000B5000018218CC400385A
+:109AA0008E2F000C3C180080AE2400008CCE0034B9
+:109AB0003C10FF9F01F86025AE2E000490CB003FC4
+:109AC000360DFFFF018D48243C0A00203C06FFEFC5
+:109AD000A22B000B012A382534C5FFFF00E54024E6
+:109AE0003C0200088F87008401022025AE24000C70
+:109AF0008CE30014AE2000188FAF0028AE230014B2
+:109B00008CF800183C1FFFFB37F9FFFFAE38001C34
+:109B10008CEE000800996824024F8021AE2E0024AC
+:109B20008CEC000CAE2D000CA6200038A620003ACC
+:109B3000AE30002CAE2C0020AE2000288CEB0014A0
+:109B40008FAA002801724823012A302310C0001177
+:109B5000AE26001090F0003D8E2C00048E2A0000EE
+:109B600000106900018D28210000102100AD302B6C
+:109B70000142482101264021AE250004AE28000004
+:109B800090E3003DA223000A8F9F008497F900060E
+:109B9000A63900088F8A0024240200023C068008AF
+:109BA000A142000034C900809525005C02402021BC
+:109BB0008F90002430A8FFFF0E000E9DAFA8002458
+:109BC0008FA300240002FB808F8500843C044200A8
+:109BD00003E3C8250324C025AE1800048F840024A5
+:109BE0008CAF0038AC8F00188CAE0034AC8E001CEB
+:109BF000AC80000CAC800010A4800014A48000167F
+:109C0000A4800020A4800022AC80002490A7003F04
+:109C1000A48700025240018C240700018FAB00286A
+:109C20005160000290A2003D90A2003E244C000131
+:109C3000A08C00018F840024AC9200083C1880089E
+:109C400037100080920F007C31EE000215C0000238
+:109C500024070034240700308F8500843C088008E6
+:109C60003509008090A300009128007C3259000340
+:109C7000A08300308F9F00848F9000242404000470
+:109C800093F8000100997823240DC000A218003138
+:109C90008F9900248F8E008431E50003972C0032C9
+:109CA00095CB001200F24821018D502431623FFF14
+:109CB00001423025A72600329323003201253821A6
+:109CC00031080004307F003F37E40040A324003215
+:109CD000124000028F85002400E838213C0C8008E7
+:109CE000ACA70034358B01008D6200C02E4400010A
+:109CF0002403FFDFACA2003890AA003C0004C94056
+:109D00003146007FA0A6003C8F8900242405FFBFB8
+:109D10009127003C00E54024A128003C8F8F0024BF
+:109D200091FF003C03E3C02403198025A1F0003C0F
+:109D30008F8B00848F8A00248D6E0020AD4E0040F2
+:109D40008D6D0024AD4D00448D6C0028AD4C004855
+:109D50008D62002C0E000EBCAD42004C8FA6002080
+:109D60002407000210C700118FA300200003202B3E
+:109D700000048023027098240060802100609021FC
+:109D80000A0011150010882B962700128F8400807E
+:109D90000000902130E5FFFFA7A700140E000E6B16
+:109DA000241100010A0011C03C1080003C19800001
+:109DB0003C0280088F240100905800080E000E42DB
+:109DC0003305007F8F8E00248FAF00208FA40028E2
+:109DD000A1CF00000E000E9D8F9000248FAD0024B7
+:109DE00000023B803C0B420000ED40258F87008441
+:109DF000010B2025AE0400048CE500388F90002470
+:109E000000005021000A1900AE0500188CEC003447
+:109E10003C087FFF3504FFFFAE0C001C90E9003EBC
+:109E20008E1F001C8E1800180009C9000009370297
+:109E300003F968210066102501B9782B030270210F
+:109E400001CF5821AE0D001CAE0B0018AE00000C67
+:109E5000AE00001090E5003E8FAF0028240E0005F4
+:109E6000A605001494EC00042405C00001E4582465
+:109E7000A60C001690EA003E01E02021A60A002070
+:109E800094E60004A6060022AE00002490E3003F02
+:109E9000A603000290E9003E90FF003D03E9C823BD
+:109EA00027380001A21800018F8D00243C10800883
+:109EB000ADAF0008A1AE00308F9800248F820084DF
+:109EC000360F0100970C0032944A00122410FF80D4
+:109ED00000AC382431463FFF00E61825A7030032C6
+:109EE000930900322405FFBF2403FFDF313F003F09
+:109EF00037F90040A31900328F8C00242418FFFF8B
+:109F0000AD8000348DEE00C0AD8E0038918D003CE8
+:109F100031A2007FA182003C8F87002490EA003CA0
+:109F200001453024A0E6003C8F9900249329003C91
+:109F30000123F824A33F003C8F8D00243C1F8008A0
+:109F4000ADB80040ADB2004491AF00483C12800073
+:109F500001F07025A1AE00488F8700248F86008411
+:109F60008CEC004801921024004B5025ACEA0048CC
+:109F700090C5003EA0E5004C8F8800848F830024AC
+:109F800095090004A469004E8FE500600E0002E60A
+:109F9000000000008F99FF2C8FAE00280002814046
+:109FA000932F007C0002C1000218682131F20002E8
+:109FB00000402821164000AA01CD30213C0A80082B
+:109FC000354300809069007C313F000413E00003BA
+:109FD0008FAE00280005608000CC3021240D0004E5
+:109FE0008F90002431C7000301A758233168000374
+:109FF00000C82021AE0400343C068008A6250038A5
+:10A000003C0580008CA4010090D100080E000E8752
+:10A010003225007F0E000EBC000000000A0012AACC
+:10A020008FA300208F8500208CC2003824180003E5
+:10A03000A4A00008ACA200008CDF0034A0A0000A9D
+:10A040008F920084ACBF00043C040080924F003F1C
+:10A05000A0B8000C8CAE000C3C0DFF9FA0AF000B15
+:10A0600001C4402535ABFFFF3C11FFEF8F98008402
+:10A07000010B30243639FFFF00D96024ACAC000C52
+:10A080008F030014971F00128F870080ACA300106D
+:10A090008F090014ACA00018ACA00020ACA90014DB
+:10A0A000ACA000248F0A001833E93FFF000911809B
+:10A0B000ACAA00288F1200080047782133EE000177
+:10A0C000ACB200308F08000C8F990024000F69C2D9
+:10A0D000000E238001A45821241100023C068008B0
+:10A0E000A4AB001CA4A00034ACA8002CA331000039
+:10A0F00034D90080972C005C8F8F00243C034200F1
+:10A10000318AFFFF01433825ADE700048F820084C8
+:10A11000241800012411C0008C5F0038240700348B
+:10A12000ADFF00188C520034ADF2001CADE0000C05
+:10A13000ADE00010A5E00014A5E00016A5E00020A9
+:10A14000A5E00022ADE00024A5F00002A1F8000186
+:10A150008F8B00248F8E0084AD70000891CD00009D
+:10A16000A16D00308F8800848F8400249105000148
+:10A17000A08500318F920024964C0032019150242A
+:10A1800001491825A6430032925F003233E2003FB6
+:10A19000A24200329338007C330F000215E0000227
+:10A1A0008F840024240700303C028008AC870034F0
+:10A1B000345201008E5F00C0240EFFBF02009021C8
+:10A1C000AC9F00389098003C330F007FA08F003C7C
+:10A1D0008F880024910D003C01AE5824A10B003C57
+:10A1E0008F86002490D1003C36390020A0D9003C55
+:10A1F0008F8A00848F8500240010882B8D4C0020CE
+:10A20000ACAC00408D430024ACA300448D49002831
+:10A21000ACA900488D47002CACA7004C0E000EBC2A
+:10A220003C1080000A0011160000000094CD00527E
+:10A230003C0B08008D6B0024016D8821A4D10052D5
+:10A240000A0010C1001E882BA08700018F84002403
+:10A25000240D0001AC8D00080A00125F3C18800834
+:10A26000000290800A00133E00D2302127BDFFE09B
+:10A270003C0D8008AFB20018AFB00010AFBF001C9B
+:10A28000AFB1001435B200808E4C001835A8010023
+:10A29000964B000695A70050910900EC000C560261
+:10A2A000016728233143007F312600FF2402000389
+:10A2B000A3830088AF84008010C2001B30B0FFFF72
+:10A2C000910600EC2412000530C200FF105200334A
+:10A2D00000000000160000098FBF001C8FB200189C
+:10A2E0008FB100148FB00010240D0C003C0C8000C6
+:10A2F00027BD002003E00008AD8D00240E0010A44F
+:10A30000020020218FBF001C8FB200188FB10014F3
+:10A310008FB00010240D0C003C0C800027BD0020E5
+:10A3200003E00008AD8D0024965800789651007A1D
+:10A33000924E007D0238782631E8FFFF31C400C01C
+:10A34000148000092D1100011600003700000000E4
+:10A350005620FFE28FBF001C0E000F7A00000000A5
+:10A360000A0014068FBF001C1620FFDA0000000050
+:10A370000E000F7A000000001440FFD88FBF001CB1
+:10A380001600002200000000925F007D33E2003FD3
+:10A39000A242007D0A0014068FBF001C950900DA56
+:10A3A0008F86006000802821240400050E000674BA
+:10A3B0003130FFFF978300723C0480002465FFFF6B
+:10A3C000A78500728C8A01B80540FFFE00000000DE
+:10A3D000AC8001808FBF001CAC9001848FB200184C
+:10A3E0008FB100148FB000103C0760133C0B1000BD
+:10A3F000240D0C003C0C800027BD0020AC87018898
+:10A40000AC8B01B803E00008AD8D00240E0010A451
+:10A41000020020215040FFB18FBF001C925F007DE1
+:10A420000A00143333E2003F0E0010A40200202182
+:10A430001440FFAA8FBF001C12200007000000007C
+:10A440009259007D3330003F36020040A242007D29
+:10A450000A0014068FBF001C0E000F7A00000000D7
+:10A460005040FF9E8FBF001C9259007D3330003F4B
+:08A470000A00146236020040EC
+:08A47800000000000000001BC1
+:10A480000000000F0000000A0000000800000006A5
+:10A4900000000005000000050000000400000004AA
+:10A4A00000000003000000030000000300000003A0
+:10A4B0000000000300000002000000020000000293
+:10A4C0000000000200000002000000020000000284
+:10A4D0000000000200000002000000020000000274
+:10A4E0000000000200000002000000020000000264
+:0CA4F0000000000100000001000000015D
+:04A4FC0080080100D3
+:10A50000800800808008000000000C0000003080FF
+:10A5100008000F4808000FF40800100C0800102075
+:10A520000800103408000F4808000F4808001068A1
+:10A53000080010A0080010B0080010D8080017C8C4
+:10A54000080017C8080018000800180008001814B0
+:10A55000080017E408001A3C08001A0808001A94BA
+:10A5600008001A9408001B1C08001A4C80080240BE
+:10A57000080021A808001FF4080021D00800226864
+:10A58000080023B808002404080025280800243007
+:10A59000080024B408002064080029D008002974A9
+:10A5A0000800201008002010080020100800259C3A
+:10A5B0000800259C08002010080020100800284CE6
+:10A5C00008002010080020100800201008002010AB
+:10A5D000080028AC080020100800201008002010F7
+:10A5E000080020100800201008002010080020108B
+:10A5F000080020100800201008002010080020107B
+:10A600000800201008002010080020100800242452
+:10A6100008002010080020100800291C0800201045
+:10A62000080020100800201008002010080020104A
+:10A63000080020100800201008002010080020103A
+:10A64000080020100800201008002010080020102A
+:10A65000080020100800201008002010080020101A
+:10A66000080027700800201008002010080026E4C9
+:10A6700008002640080037880800375C08003728A3
+:10A68000080036FC080036DC08003690800801001F
+:10A69000800800808008000080080080080046F0E4
+:10A6A0000800472808004670080046F0080046F0F9
+:0CA6B00008004450080046F008004AC4AE
+:04A6BC000A000C760E
+:10A6C00000000000000000000000000D72787035EE
+:10A6D0002E302E306A330000050000030000000019
+:10A6E0000000000100000000000000000000000069
+:10A6F000000000000000000000000000000000005A
+:10A700000000000000000000000000000000000049
+:10A710000000000000000000000000000000000039
+:10A720000000000000000000000000000000000029
+:10A730000000000000000000000000000000000019
+:10A740000000000000000000000000000000000009
+:10A7500000000000000000000000000000000000F9
+:10A7600000000000000000000000000000000000E9
+:10A7700000000000000000000000000000000000D9
+:10A7800000000000000000000000000000000000C9
+:10A7900000000000000000000000000000000000B9
+:10A7A00000000000000000000000000000000000A9
+:10A7B0000000000000000000000000000000000099
+:10A7C0000000000000000000000000000000000089
+:10A7D0000000000000000000000000000000000079
+:10A7E0000000000000000000000000000000000069
+:10A7F0000000000000000000000000000000000059
+:10A800000000000000000000000000000000000048
+:10A810000000000000000000000000000000000038
+:10A820000000000000000000000000000000000028
+:10A830000000000000000000000000000000000018
+:10A840000000000000000000000000000000000008
+:10A8500000000000000000000000000000000000F8
+:10A8600000000000000000000000000000000000E8
+:10A8700000000000000000000000000000000000D8
+:10A8800000000000000000000000000000000000C8
+:10A8900000000000000000000000000000000000B8
+:10A8A00000000000000000000000000000000000A8
+:10A8B0000000000000000000000000000000000098
+:10A8C0000000000000000000000000000000000088
+:10A8D0000000000000000000000000000000000078
+:10A8E0000000000000000000000000000000000068
+:10A8F0000000000000000000000000000000000058
+:10A900000000000000000000000000000000000047
+:10A910000000000000000000000000000000000037
+:10A920000000000000000000000000000000000027
+:10A930000000000000000000000000000000000017
+:10A940000000000000000000000000000000000007
+:10A9500000000000000000000000000000000000F7
+:10A9600000000000000000000000000000000000E7
+:10A9700000000000000000000000000000000000D7
+:10A9800000000000000000000000000000000000C7
+:10A9900000000000000000000000000000000000B7
+:10A9A00000000000000000000000000000000000A7
+:10A9B0000000000000000000000000000000000097
+:10A9C0000000000000000000000000000000000087
+:10A9D0000000000000000000000000000000000077
+:10A9E0000000000000000000000000000000000067
+:10A9F0000000000000000000000000000000000057
+:10AA00000000000000000000000000000000000046
+:10AA10000000000000000000000000000000000036
+:10AA20000000000000000000000000000000000026
+:10AA30000000000000000000000000000000000016
+:10AA40000000000000000000000000000000000006
+:10AA500000000000000000000000000000000000F6
+:10AA600000000000000000000000000000000000E6
+:10AA700000000000000000000000000000000000D6
+:10AA800000000000000000000000000000000000C6
+:10AA900000000000000000000000000000000000B6
+:10AAA00000000000000000000000000000000000A6
+:10AAB0000000000000000000000000000000000096
+:10AAC0000000000000000000000000000000000086
+:10AAD0000000000000000000000000000000000076
+:10AAE0000000000000000000000000000000000066
+:10AAF0000000000000000000000000000000000056
+:10AB00000000000000000000000000000000000045
+:10AB10000000000000000000000000000000000035
+:10AB20000000000000000000000000000000000025
+:10AB30000000000000000000000000000000000015
+:10AB40000000000000000000000000000000000005
+:10AB500000000000000000000000000000000000F5
+:10AB600000000000000000000000000000000000E5
+:10AB700000000000000000000000000000000000D5
+:10AB800000000000000000000000000000000000C5
+:10AB900000000000000000000000000000000000B5
+:10ABA00000000000000000000000000000000000A5
+:10ABB0000000000000000000000000000000000095
+:10ABC0000000000000000000000000000000000085
+:10ABD0000000000000000000000000000000000075
+:10ABE0000000000000000000000000000000000065
+:10ABF0000000000000000000000000000000000055
+:10AC00000000000000000000000000000000000044
+:10AC10000000000000000000000000000000000034
+:10AC20000000000000000000000000000000000024
+:10AC30000000000000000000000000000000000014
+:10AC40000000000000000000000000000000000004
+:10AC500000000000000000000000000000000000F4
+:10AC600000000000000000000000000000000000E4
+:10AC700000000000000000000000000000000000D4
+:10AC800000000000000000000000000000000000C4
+:10AC900000000000000000000000000000000000B4
+:10ACA00000000000000000000000000000000000A4
+:10ACB0000000000000000000000000000000000094
+:10ACC0000000000000000000000000000000000084
+:10ACD0000000000000000000000000000000000074
+:10ACE0000000000000000000000000000000000064
+:10ACF0000000000000000000000000000000000054
+:10AD00000000000000000000000000000000000043
+:10AD10000000000000000000000000000000000033
+:10AD20000000000000000000000000000000000023
+:10AD30000000000000000000000000000000000013
+:10AD40000000000000000000000000000000000003
+:10AD500000000000000000000000000000000000F3
+:10AD600000000000000000000000000000000000E3
+:10AD700000000000000000000000000000000000D3
+:10AD800000000000000000000000000000000000C3
+:10AD900000000000000000000000000000000000B3
+:10ADA00000000000000000000000000000000000A3
+:10ADB0000000000000000000000000000000000093
+:10ADC0000000000000000000000000000000000083
+:10ADD0000000000000000000000000000000000073
+:10ADE0000000000000000000000000000000000063
+:10ADF0000000000000000000000000000000000053
+:10AE00000000000000000000000000000000000042
+:10AE10000000000000000000000000000000000032
+:10AE20000000000000000000000000000000000022
+:10AE30000000000000000000000000000000000012
+:10AE40000000000000000000000000000000000002
+:10AE500000000000000000000000000000000000F2
+:10AE600000000000000000000000000000000000E2
+:10AE700000000000000000000000000000000000D2
+:10AE800000000000000000000000000000000000C2
+:10AE900000000000000000000000000000000000B2
+:10AEA00000000000000000000000000000000000A2
+:10AEB0000000000000000000000000000000000092
+:10AEC0000000000000000000000000000000000082
+:10AED0000000000000000000000000000000000072
+:10AEE0000000000000000000000000000000000062
+:10AEF0000000000000000000000000000000000052
+:10AF00000000000000000000000000000000000041
+:10AF10000000000000000000000000000000000031
+:10AF20000000000000000000000000000000000021
+:10AF30000000000000000000000000000000000011
+:10AF40000000000000000000000000000000000001
+:10AF500000000000000000000000000000000000F1
+:10AF600000000000000000000000000000000000E1
+:10AF700000000000000000000000000000000000D1
+:10AF800000000000000000000000000000000000C1
+:10AF900000000000000000000000000000000000B1
+:10AFA00000000000000000000000000000000000A1
+:10AFB0000000000000000000000000000000000091
+:10AFC0000000000000000000000000000000000081
+:10AFD0000000000000000000000000000000000071
+:10AFE0000000000000000000000000000000000061
+:10AFF0000000000000000000000000000000000051
+:10B000000000000000000000000000000000000040
+:10B010000000000000000000000000000000000030
+:10B020000000000000000000000000000000000020
+:10B030000000000000000000000000000000000010
+:10B040000000000000000000000000000000000000
+:10B0500000000000000000000000000000000000F0
+:10B0600000000000000000000000000000000000E0
+:10B0700000000000000000000000000000000000D0
+:10B0800000000000000000000000000000000000C0
+:10B0900000000000000000000000000000000000B0
+:10B0A00000000000000000000000000000000000A0
+:10B0B0000000000000000000000000000000000090
+:10B0C0000000000000000000000000000000000080
+:10B0D0000000000000000000000000000000000070
+:10B0E0000000000000000000000000000000000060
+:10B0F0000000000000000000000000000000000050
+:10B10000000000000000000000000000000000003F
+:10B11000000000000000000000000000000000002F
+:10B12000000000000000000000000000000000001F
+:10B13000000000000000000000000000000000000F
+:10B1400000000000000000000000000000000000FF
+:10B1500000000000000000000000000000000000EF
+:10B1600000000000000000000000000000000000DF
+:10B1700000000000000000000000000000000000CF
+:10B1800000000000000000000000000000000000BF
+:10B1900000000000000000000000000000000000AF
+:10B1A000000000000000000000000000000000009F
+:10B1B000000000000000000000000000000000008F
+:10B1C000000000000000000000000000000000007F
+:10B1D000000000000000000000000000000000006F
+:10B1E000000000000000000000000000000000005F
+:10B1F000000000000000000000000000000000004F
+:10B20000000000000000000000000000000000003E
+:10B21000000000000000000000000000000000002E
+:10B22000000000000000000000000000000000001E
+:10B23000000000000000000000000000000000000E
+:10B2400000000000000000000000000000000000FE
+:10B2500000000000000000000000000000000000EE
+:10B2600000000000000000000000000000000000DE
+:10B2700000000000000000000000000000000000CE
+:10B2800000000000000000000000000000000000BE
+:10B2900000000000000000000000000000000000AE
+:10B2A000000000000000000000000000000000009E
+:10B2B000000000000000000000000000000000008E
+:10B2C000000000000000000000000000000000007E
+:10B2D000000000000000000000000000000000006E
+:10B2E000000000000000000000000000000000005E
+:10B2F000000000000000000000000000000000004E
+:10B30000000000000000000000000000000000003D
+:10B31000000000000000000000000000000000002D
+:10B32000000000000000000000000000000000001D
+:10B33000000000000000000000000000000000000D
+:10B3400000000000000000000000000000000000FD
+:10B3500000000000000000000000000000000000ED
+:10B3600000000000000000000000000000000000DD
+:10B3700000000000000000000000000000000000CD
+:10B3800000000000000000000000000000000000BD
+:10B3900000000000000000000000000000000000AD
+:10B3A000000000000000000000000000000000009D
+:10B3B000000000000000000000000000000000008D
+:10B3C000000000000000000000000000000000007D
+:10B3D000000000000000000000000000000000006D
+:10B3E000000000000000000000000000000000005D
+:10B3F000000000000000000000000000000000004D
+:10B40000000000000000000000000000000000003C
+:10B41000000000000000000000000000000000002C
+:10B42000000000000000000000000000000000001C
+:10B43000000000000000000000000000000000000C
+:10B4400000000000000000000000000000000000FC
+:10B4500000000000000000000000000000000000EC
+:10B4600000000000000000000000000000000000DC
+:10B4700000000000000000000000000000000000CC
+:10B4800000000000000000000000000000000000BC
+:10B4900000000000000000000000000000000000AC
+:10B4A000000000000000000000000000000000009C
+:10B4B000000000000000000000000000000000008C
+:10B4C000000000000000000000000000000000007C
+:10B4D000000000000000000000000000000000006C
+:10B4E000000000000000000000000000000000005C
+:10B4F000000000000000000000000000000000004C
+:10B50000000000000000000000000000000000003B
+:10B51000000000000000000000000000000000002B
+:10B52000000000000000000000000000000000001B
+:10B53000000000000000000000000000000000000B
+:10B5400000000000000000000000000000000000FB
+:10B5500000000000000000000000000000000000EB
+:10B5600000000000000000000000000000000000DB
+:10B5700000000000000000000000000000000000CB
+:10B5800000000000000000000000000000000000BB
+:10B5900000000000000000000000000000000000AB
+:10B5A000000000000000000000000000000000009B
+:10B5B000000000000000000000000000000000008B
+:10B5C000000000000000000000000000000000007B
+:10B5D000000000000000000000000000000000006B
+:10B5E000000000000000000000000000000000005B
+:10B5F000000000000000000000000000000000004B
+:10B60000000000000000000000000000000000003A
+:10B61000000000000000000000000000000000002A
+:10B62000000000000000000000000000000000001A
+:10B63000000000000000000000000000000000000A
+:10B6400000000000000000000000000000000000FA
+:10B6500000000000000000000000000000000000EA
+:10B6600000000000000000000000000000000000DA
+:10B6700000000000000000000000000000000000CA
+:10B6800000000000000000000000000000000000BA
+:10B6900000000000000000000000000000000000AA
+:10B6A000000000000000000000000000000000009A
+:10B6B000000000000000000000000000000000008A
+:10B6C000000000000000000000000000000000007A
+:10B6D000000000000000000000000000000000006A
+:10B6E000000000000000000000000000000000005A
+:10B6F000000000000000000000000000000000004A
+:10B700000000000000000000000000000000000039
+:10B710000000000000000000000000000000000029
+:10B720000000000000000000000000000000000019
+:10B730000000000000000000000000000000000009
+:10B7400000000000000000000000000000000000F9
+:10B7500000000000000000000000000000000000E9
+:10B7600000000000000000000000000000000000D9
+:10B7700000000000000000000000000000000000C9
+:10B7800000000000000000000000000000000000B9
+:10B7900000000000000000000000000000000000A9
+:10B7A0000000000000000000000000000000000099
+:10B7B0000000000000000000000000000000000089
+:10B7C0000000000000000000000000000000000079
+:10B7D0000000000000000000000000000000000069
+:10B7E0000000000000000000000000000000000059
+:10B7F0000000000000000000000000000000000049
+:10B800000000000000000000000000000000000038
+:10B810000000000000000000000000000000000028
+:10B820000000000000000000000000000000000018
+:10B830000000000000000000000000000000000008
+:10B8400000000000000000000000000000000000F8
+:10B8500000000000000000000000000000000000E8
+:10B8600000000000000000000000000000000000D8
+:10B8700000000000000000000000000000000000C8
+:10B8800000000000000000000000000000000000B8
+:10B8900000000000000000000000000000000000A8
+:10B8A0000000000000000000000000000000000098
+:10B8B0000000000000000000000000000000000088
+:10B8C0000000000000000000000000000000000078
+:10B8D0000000000000000000000000000000000068
+:10B8E0000000000000000000000000000000000058
+:10B8F0000000000000000000000000000000000048
+:10B900000000000000000000000000000000000037
+:10B910000000000000000000000000000000000027
+:10B920000000000000000000000000000000000017
+:10B930000000000000000000000000000000000007
+:10B9400000000000000000000000000000000000F7
+:10B9500000000000000000000000000000000000E7
+:10B9600000000000000000000000000000000000D7
+:10B9700000000000000000000000000000000000C7
+:10B9800000000000000000000000000000000000B7
+:10B9900000000000000000000000000000000000A7
+:10B9A0000000000000000000000000000000000097
+:10B9B0000000000000000000000000000000000087
+:10B9C0000000000000000000000000000000000077
+:10B9D0000000000000000000000000000000000067
+:10B9E0000000000000000000000000000000000057
+:10B9F0000000000000000000000000000000000047
+:10BA00000000000000000000000000000000000036
+:10BA10000000000000000000000000000000000026
+:10BA20000000000000000000000000000000000016
+:10BA30000000000000000000000000000000000006
+:10BA400000000000000000000000000000000000F6
+:10BA500000000000000000000000000000000000E6
+:10BA600000000000000000000000000000000000D6
+:10BA700000000000000000000000000000000000C6
+:10BA800000000000000000000000000000000000B6
+:10BA900000000000000000000000000000000000A6
+:10BAA0000000000000000000000000000000000096
+:10BAB0000000000000000000000000000000000086
+:10BAC0000000000000000000000000000000000076
+:10BAD0000000000000000000000000000000000066
+:10BAE0000000000000000000000000000000000056
+:10BAF0000000000000000000000000000000000046
+:10BB00000000000000000000000000000000000035
+:10BB10000000000000000000000000000000000025
+:10BB20000000000000000000000000000000000015
+:10BB30000000000000000000000000000000000005
+:10BB400000000000000000000000000000000000F5
+:10BB500000000000000000000000000000000000E5
+:10BB600000000000000000000000000000000000D5
+:10BB700000000000000000000000000000000000C5
+:10BB800000000000000000000000000000000000B5
+:10BB900000000000000000000000000000000000A5
+:10BBA0000000000000000000000000000000000095
+:10BBB0000000000000000000000000000000000085
+:10BBC0000000000000000000000000000000000075
+:10BBD0000000000000000000000000000000000065
+:10BBE0000000000000000000000000000000000055
+:10BBF0000000000000000000000000000000000045
+:10BC00000000000000000000000000000000000034
+:10BC10000000000000000000000000000000000024
+:10BC20000000000000000000000000000000000014
+:10BC30000000000000000000000000000000000004
+:10BC400000000000000000000000000000000000F4
+:10BC500000000000000000000000000000000000E4
+:10BC600000000000000000000000000000000000D4
+:10BC700000000000000000000000000000000000C4
+:10BC800000000000000000000000000000000000B4
+:10BC900000000000000000000000000000000000A4
+:10BCA0000000000000000000000000000000000094
+:10BCB0000000000000000000000000000000000084
+:10BCC0000000000000000000000000000000000074
+:10BCD0000000000000000000000000000000000064
+:10BCE0000000000000000000000000000000000054
+:10BCF0000000000000000000000000000000000044
+:10BD00000000000000000000000000000000000033
+:10BD10000000000000000000000000000000000023
+:10BD20000000000000000000000000000000000013
+:10BD30000000000000000000000000000000000003
+:10BD400000000000000000000000000000000000F3
+:10BD500000000000000000000000000000000000E3
+:10BD600000000000000000000000000000000000D3
+:10BD700000000000000000000000000000000000C3
+:10BD800000000000000000000000000000000000B3
+:10BD900000000000000000000000000000000000A3
+:10BDA0000000000000000000000000000000000093
+:10BDB0000000000000000000000000000000000083
+:10BDC0000000000000000000000000000000000073
+:10BDD0000000000000000000000000000000000063
+:10BDE0000000000000000000000000000000000053
+:10BDF0000000000000000000000000000000000043
+:10BE00000000000000000000000000000000000032
+:10BE10000000000000000000000000000000000022
+:10BE20000000000000000000000000000000000012
+:10BE30000000000000000000000000000000000002
+:10BE400000000000000000000000000000000000F2
+:10BE500000000000000000000000000000000000E2
+:10BE600000000000000000000000000000000000D2
+:10BE700000000000000000000000000000000000C2
+:10BE800000000000000000000000000000000000B2
+:10BE900000000000000000000000000000000000A2
+:10BEA0000000000000000000000000000000000092
+:10BEB0000000000000000000000000000000000082
+:10BEC0000000000000000000000000000000000072
+:10BED0000000000000000000000000000000000062
+:10BEE0000000000000000000000000000000000052
+:10BEF0000000000000000000000000000000000042
+:10BF00000000000000000000000000000000000031
+:10BF10000000000000000000000000000000000021
+:10BF20000000000000000000000000000000000011
+:10BF30000000000000000000000000000000000001
+:10BF400000000000000000000000000000000000F1
+:10BF500000000000000000000000000000000000E1
+:10BF600000000000000000000000000000000000D1
+:10BF700000000000000000000000000000000000C1
+:10BF800000000000000000000000000000000000B1
+:10BF900000000000000000000000000000000000A1
+:10BFA0000000000000000000000000000000000091
+:10BFB0000000000000000000000000000000000081
+:10BFC0000000000000000000000000000000000071
+:10BFD0000000000000000000000000000000000061
+:10BFE0000000000000000000000000000000000051
+:10BFF0000000000000000000000000000000000041
+:10C000000000000000000000000000000000000030
+:10C010000000000000000000000000000000000020
+:10C020000000000000000000000000000000000010
+:10C030000000000000000000000000000000000000
+:10C0400000000000000000000000000000000000F0
+:10C0500000000000000000000000000000000000E0
+:10C0600000000000000000000000000000000000D0
+:10C0700000000000000000000000000000000000C0
+:10C0800000000000000000000000000000000000B0
+:10C0900000000000000000000000000000000000A0
+:10C0A0000000000000000000000000000000000090
+:10C0B0000000000000000000000000000000000080
+:10C0C0000000000000000000000000000000000070
+:10C0D0000000000000000000000000000000000060
+:10C0E0000000000000000000000000000000000050
+:10C0F0000000000000000000000000000000000040
+:10C10000000000000000000000000000000000002F
+:10C11000000000000000000000000000000000001F
+:10C12000000000000000000000000000000000000F
+:10C1300000000000000000000000000000000000FF
+:10C1400000000000000000000000000000000000EF
+:10C1500000000000000000000000000000000000DF
+:10C1600000000000000000000000000000000000CF
+:10C1700000000000000000000000000000000000BF
+:10C1800000000000000000000000000000000000AF
+:10C19000000000000000000000000000000000009F
+:10C1A000000000000000000000000000000000008F
+:10C1B000000000000000000000000000000000007F
+:10C1C000000000000000000000000000000000006F
+:10C1D000000000000000000000000000000000005F
+:10C1E000000000000000000000000000000000004F
+:10C1F000000000000000000000000000000000003F
+:10C20000000000000000000000000000000000002E
+:10C21000000000000000000000000000000000001E
+:10C22000000000000000000000000000000000000E
+:10C2300000000000000000000000000000000000FE
+:10C2400000000000000000000000000000000000EE
+:10C2500000000000000000000000000000000000DE
+:10C2600000000000000000000000000000000000CE
+:10C2700000000000000000000000000000000000BE
+:10C2800000000000000000000000000000000000AE
+:10C29000000000000000000000000000000000009E
+:10C2A000000000000000000000000000000000008E
+:10C2B000000000000000000000000000000000007E
+:10C2C000000000000000000000000000000000006E
+:10C2D000000000000000000000000000000000005E
+:10C2E000000000000000000000000000000000004E
+:10C2F000000000000000000000000000000000003E
+:10C30000000000000000000000000000000000002D
+:10C31000000000000000000000000000000000001D
+:10C32000000000000000000000000000000000000D
+:10C3300000000000000000000000000000000000FD
+:10C3400000000000000000000000000000000000ED
+:10C3500000000000000000000000000000000000DD
+:10C3600000000000000000000000000000000000CD
+:10C3700000000000000000000000000000000000BD
+:10C3800000000000000000000000000000000000AD
+:10C39000000000000000000000000000000000009D
+:10C3A000000000000000000000000000000000008D
+:10C3B000000000000000000000000000000000007D
+:10C3C000000000000000000000000000000000006D
+:10C3D000000000000000000000000000000000005D
+:10C3E000000000000000000000000000000000004D
+:10C3F000000000000000000000000000000000003D
+:10C40000000000000000000000000000000000002C
+:10C41000000000000000000000000000000000001C
+:10C42000000000000000000000000000000000000C
+:10C4300000000000000000000000000000000000FC
+:10C4400000000000000000000000000000000000EC
+:10C4500000000000000000000000000000000000DC
+:10C4600000000000000000000000000000000000CC
+:10C4700000000000000000000000000000000000BC
+:10C4800000000000000000000000000000000000AC
+:10C49000000000000000000000000000000000009C
+:10C4A000000000000000000000000000000000008C
+:10C4B000000000000000000000000000000000007C
+:10C4C000000000000000000000000000000000006C
+:10C4D000000000000000000000000000000000005C
+:10C4E000000000000000000000000000000000004C
+:10C4F000000000000000000000000000000000003C
+:10C50000000000000000000000000000000000002B
+:10C51000000000000000000000000000000000001B
+:10C52000000000000000000000000000000000000B
+:10C5300000000000000000000000000000000000FB
+:10C5400000000000000000000000000000000000EB
+:10C5500000000000000000000000000000000000DB
+:10C5600000000000000000000000000000000000CB
+:10C5700000000000000000000000000000000000BB
+:10C5800000000000000000000000000000000000AB
+:10C59000000000000000000000000000000000009B
+:10C5A000000000000000000000000000000000008B
+:10C5B000000000000000000000000000000000007B
+:10C5C000000000000000000000000000000000006B
+:10C5D000000000000000000000000000000000005B
+:10C5E000000000000000000000000000000000004B
+:10C5F000000000000000000000000000000000003B
+:10C60000000000000000000000000000000000002A
+:10C61000000000000000000000000000000000001A
+:10C62000000000000000000000000000000000000A
+:10C6300000000000000000000000000000000000FA
+:10C6400000000000000000000000000000000000EA
+:10C6500000000000000000000000000000000000DA
+:10C6600000000000000000000000000000000000CA
+:10C6700000000000000000000000000000000000BA
+:10C6800000000000000000000000000000000000AA
+:10C69000000000000000000000000000000000009A
+:10C6A000000000000000000000000000000000008A
+:10C6B000000000000000000000000000000000007A
+:10C6C000000000000000000000000000000000006A
+:10C6D000000000000000000000000000000000005A
+:10C6E000000000000000000000000000000000004A
+:10C6F000000000000000000000000000000000003A
+:10C700000000000000000000000000000000000029
+:10C710000000000000000000000000000000000019
+:10C720000000000000000000000000000000000009
+:10C7300000000000000000000000000000000000F9
+:10C7400000000000000000000000000000000000E9
+:10C7500000000000000000000000000000000000D9
+:10C7600000000000000000000000000000000000C9
+:10C7700000000000000000000000000000000000B9
+:10C7800000000000000000000000000000000000A9
+:10C790000000000000000000000000000000000099
+:10C7A0000000000000000000000000000000000089
+:10C7B0000000000000000000000000000000000079
+:10C7C0000000000000000000000000000000000069
+:10C7D0000000000000000000000000000000000059
+:10C7E0000000000000000000000000000000000049
+:10C7F0000000000000000000000000000000000039
+:10C800000000000000000000000000000000000028
+:10C810000000000000000000000000000000000018
+:10C820000000000000000000000000000000000008
+:10C8300000000000000000000000000000000000F8
+:10C8400000000000000000000000000000000000E8
+:10C8500000000000000000000000000000000000D8
+:10C8600000000000000000000000000000000000C8
+:10C8700000000000000000000000000000000000B8
+:10C8800000000000000000000000000000000000A8
+:10C890000000000000000000000000000000000098
+:10C8A0000000000000000000000000000000000088
+:10C8B0000000000000000000000000000000000078
+:10C8C0000000000000000000000000000000000068
+:10C8D0000000000000000000000000000000000058
+:10C8E0000000000000000000000000000000000048
+:10C8F0000000000000000000000000000000000038
+:10C900000000000000000000000000000000000027
+:10C910000000000000000000000000000000000017
+:10C920000000000000000000000000000000000007
+:10C9300000000000000000000000000000000000F7
+:10C9400000000000000000000000000000000000E7
+:10C9500000000000000000000000000000000000D7
+:10C9600000000000000000000000000000000000C7
+:10C9700000000000000000000000000000000000B7
+:10C9800000000000000000000000000000000000A7
+:10C990000000000000000000000000000000000097
+:10C9A0000000000000000000000000000000000087
+:10C9B0000000000000000000000000000000000077
+:10C9C0000000000000000000000000000000000067
+:10C9D0000000000000000000000000000000000057
+:10C9E0000000000000000000000000000000000047
+:10C9F0000000000000000000000000000000000037
+:10CA00000000000000000000000000000000000026
+:10CA10000000000000000000000000000000000016
+:10CA20000000000000000000000000000000000006
+:10CA300000000000000000000000000000000000F6
+:10CA400000000000000000000000000000000000E6
+:10CA500000000000000000000000000000000000D6
+:10CA600000000000000000000000000000000000C6
+:10CA700000000000000000000000000000000000B6
+:10CA800000000000000000000000000000000000A6
+:10CA90000000000000000000000000000000000096
+:10CAA0000000000000000000000000000000000086
+:10CAB0000000000000000000000000000000000076
+:10CAC0000000000000000000000000000000000066
+:10CAD0000000000000000000000000000000000056
+:10CAE0000000000000000000000000000000000046
+:10CAF0000000000000000000000000000000000036
+:10CB00000000000000000000000000000000000025
+:10CB10000000000000000000000000000000000015
+:10CB20000000000000000000000000000000000005
+:10CB300000000000000000000000000000000000F5
+:10CB400000000000000000000000000000000000E5
+:10CB500000000000000000000000000000000000D5
+:10CB600000000000000000000000000000000000C5
+:10CB700000000000000000000000000000000000B5
+:10CB800000000000000000000000000000000000A5
+:10CB90000000000000000000000000000000000095
+:10CBA0000000000000000000000000000000000085
+:10CBB0000000000000000000000000000000000075
+:10CBC0000000000000000000000000000000000065
+:10CBD0000000000000000000000000000000000055
+:10CBE0000000000000000000000000000000000045
+:10CBF0000000000000000000000000000000000035
+:10CC00000000000000000000000000000000000024
+:10CC10000000000000000000000000000000000014
+:10CC20000000000000000000000000000000000004
+:10CC300000000000000000000000000000000000F4
+:10CC400000000000000000000000000000000000E4
+:10CC500000000000000000000000000000000000D4
+:10CC600000000000000000000000000000000000C4
+:10CC700000000000000000000000000000000000B4
+:10CC800000000000000000000000000000000000A4
+:10CC90000000000000000000000000000000000094
+:10CCA0000000000000000000000000000000000084
+:10CCB0000000000000000000000000000000000074
+:10CCC0000000000000000000000000000000000064
+:10CCD0000000000000000000000000000000000054
+:10CCE0000000000000000000000000000000000044
+:10CCF0000000000000000000000000000000000034
+:10CD00000000000000000000000000000000000023
+:10CD10000000000000000000000000000000000013
+:10CD20000000000000000000000000000000000003
+:10CD300000000000000000000000000000000000F3
+:10CD400000000000000000000000000000000000E3
+:10CD500000000000000000000000000000000000D3
+:10CD600000000000000000000000000000000000C3
+:10CD700000000000000000000000000000000000B3
+:10CD800000000000000000000000000000000000A3
+:10CD90000000000000000000000000000000000093
+:10CDA0000000000000000000000000000000000083
+:10CDB0000000000000000000000000000000000073
+:10CDC0000000000000000000000000000000000063
+:10CDD0000000000000000000000000000000000053
+:10CDE0000000000000000000000000000000000043
+:10CDF0000000000000000000000000000000000033
+:10CE00000000000000000000000000000000000022
+:10CE10000000000000000000000000000000000012
+:10CE20000000000000000000000000000000000002
+:10CE300000000000000000000000000000000000F2
+:10CE400000000000000000000000000000000000E2
+:10CE500000000000000000000000000000000000D2
+:10CE600000000000000000000000000000000000C2
+:10CE700000000000000000000000000000000000B2
+:10CE800000000000000000000000000000000000A2
+:10CE90000000000000000000000000000000000092
+:10CEA0000000000000000000000000000000000082
+:10CEB0000000000000000000000000000000000072
+:10CEC0000000000000000000000000000000000062
+:10CED0000000000000000000000000000000000052
+:10CEE0000000000000000000000000000000000042
+:10CEF0000000000000000000000000000000000032
+:10CF00000000000000000000000000000000000021
+:10CF10000000000000000000000000000000000011
+:10CF20000000000000000000000000000000000001
+:10CF300000000000000000000000000000000000F1
+:10CF400000000000000000000000000000000000E1
+:10CF500000000000000000000000000000000000D1
+:10CF600000000000000000000000000000000000C1
+:10CF700000000000000000000000000000000000B1
+:10CF800000000000000000000000000000000000A1
+:10CF90000000000000000000000000000000000091
+:10CFA0000000000000000000000000000000000081
+:10CFB0000000000000000000000000000000000071
+:10CFC0000000000000000000000000000000000061
+:10CFD0000000000000000000000000000000000051
+:10CFE0000000000000000000000000000000000041
+:10CFF0000000000000000000000000000000000031
+:10D000000000000000000000000000000000000020
+:10D010000000000000000000000000000000000010
+:10D020000000000000000000000000000000000000
+:10D0300000000000000000000000000000000000F0
+:10D0400000000000000000000000000000000000E0
+:10D0500000000000000000000000000000000000D0
+:10D0600000000000000000000000000000000000C0
+:10D0700000000000000000000000000000000000B0
+:10D0800000000000000000000000000000000000A0
+:10D090000000000000000000000000000000000090
+:10D0A0000000000000000000000000000000000080
+:10D0B0000000000000000000000000000000000070
+:10D0C0000000000000000000000000000000000060
+:10D0D0000000000000000000000000000000000050
+:10D0E0000000000000000000000000000000000040
+:10D0F0000000000000000000000000000000000030
+:10D10000000000000000000000000000000000001F
+:10D11000000000000000000000000000000000000F
+:10D1200000000000000000000000000000000000FF
+:10D1300000000000000000000000000000000000EF
+:10D1400000000000000000000000000000000000DF
+:10D1500000000000000000000000000000000000CF
+:10D1600000000000000000000000000000000000BF
+:10D1700000000000000000000000000000000000AF
+:10D18000000000000000000000000000000000009F
+:10D19000000000000000000000000000000000008F
+:10D1A000000000000000000000000000000000007F
+:10D1B000000000000000000000000000000000006F
+:10D1C000000000000000000000000000000000005F
+:10D1D000000000000000000000000000000000004F
+:10D1E000000000000000000000000000000000003F
+:10D1F000000000000000000000000000000000002F
+:10D20000000000000000000000000000000000001E
+:10D21000000000000000000000000000000000000E
+:10D2200000000000000000000000000000000000FE
+:10D2300000000000000000000000000000000000EE
+:10D2400000000000000000000000000000000000DE
+:10D2500000000000000000000000000000000000CE
+:10D2600000000000000000000000000000000000BE
+:10D2700000000000000000000000000000000000AE
+:10D28000000000000000000000000000000000009E
+:10D29000000000000000000000000000000000008E
+:10D2A000000000000000000000000000000000007E
+:10D2B000000000000000000000000000000000006E
+:10D2C000000000000000000000000000000000005E
+:10D2D000000000000000000000000000000000004E
+:10D2E000000000000000000000000000000000003E
+:10D2F000000000000000000000000000000000002E
+:10D30000000000000000000000000000000000001D
+:10D31000000000000000000000000000000000000D
+:10D3200000000000000000000000000000000000FD
+:10D3300000000000000000000000000000000000ED
+:10D3400000000000000000000000000000000000DD
+:10D3500000000000000000000000000000000000CD
+:10D3600000000000000000000000000000000000BD
+:10D3700000000000000000000000000000000000AD
+:10D38000000000000000000000000000000000009D
+:10D39000000000000000000000000000000000008D
+:10D3A000000000000000000000000000000000007D
+:10D3B000000000000000000000000000000000006D
+:10D3C000000000000000000000000000000000005D
+:10D3D000000000000000000000000000000000004D
+:10D3E000000000000000000000000000000000003D
+:10D3F000000000000000000000000000000000002D
+:10D40000000000000000000000000000000000001C
+:10D41000000000000000000000000000000000000C
+:10D4200000000000000000000000000000000000FC
+:10D4300000000000000000000000000000000000EC
+:10D4400000000000000000000000000000000000DC
+:10D4500000000000000000000000000000000000CC
+:10D4600000000000000000000000000000000000BC
+:10D4700000000000000000000000000000000000AC
+:10D48000000000000000000000000000000000009C
+:10D49000000000000000000000000000000000008C
+:10D4A000000000000000000000000000000000007C
+:10D4B000000000000000000000000000000000006C
+:10D4C000000000000000000000000000000000005C
+:10D4D000000000000000000000000000000000004C
+:10D4E000000000000000000000000000000000003C
+:10D4F000000000000000000000000000000000002C
+:10D50000000000000000000000000000000000001B
+:10D51000000000000000000000000000000000000B
+:10D5200000000000000000000000000000000000FB
+:10D5300000000000000000000000000000000000EB
+:10D5400000000000000000000000000000000000DB
+:10D5500000000000000000000000000000000000CB
+:10D5600000000000000000000000000000000000BB
+:10D5700000000000000000000000000000000000AB
+:10D58000000000000000000000000000000000009B
+:10D59000000000000000000000000000000000008B
+:10D5A000000000000000000000000000000000007B
+:10D5B000000000000000000000000000000000006B
+:10D5C000000000000000000000000000000000005B
+:10D5D000000000000000000000000000000000004B
+:10D5E000000000000000000000000000000000003B
+:10D5F000000000000000000000000000000000002B
+:10D60000000000000000000000000000000000001A
+:10D61000000000000000000000000000000000000A
+:10D6200000000000000000000000000000000000FA
+:10D6300000000000000000000000000000000000EA
+:10D6400000000000000000000000000000000000DA
+:10D6500000000000000000000000000000000000CA
+:10D6600000000000000000000000000000000000BA
+:10D6700000000000000000000000000000000000AA
+:10D68000000000000000000000000000000000009A
+:10D69000000000000000000000000000000000008A
+:10D6A000000000000000000000000000000000007A
+:10D6B000000000000000000000000000000000006A
+:10D6C000000000000000000000000000000000005A
+:10D6D000000000000000000000000000000000004A
+:10D6E000000000000000000000000000000000003A
+:10D6F000000000000000000000000000000000002A
+:10D700000000000000000000000000000000000019
+:10D710000000000000000000000000000000000009
+:10D7200000000000000000000000000000000000F9
+:10D7300000000000000000000000000000000000E9
+:10D7400000000000000000000000000000000000D9
+:10D7500000000000000000000000000000000000C9
+:10D7600000000000000000000000000000000000B9
+:10D7700000000000000000000000000000000000A9
+:10D780000000000000000000000000000000000099
+:10D790000000000000000000000000000000000089
+:10D7A0000000000000000000000000000000000079
+:10D7B0000000000000000000000000000000000069
+:10D7C0000000000000000000000000000000000059
+:10D7D0000000000000000000000000000000000049
+:10D7E0000000000000000000000000000000000039
+:10D7F0000000000000000000000000000000000029
+:10D800000000000000000000000000000000000018
+:10D810000000000000000000000000000000000008
+:10D8200000000000000000000000000000000000F8
+:10D8300000000000000000000000000000000000E8
+:10D8400000000000000000000000000000000000D8
+:10D8500000000000000000000000000000000000C8
+:10D8600000000000000000000000000000000000B8
+:10D8700000000000000000000000000000000000A8
+:10D880000000000000000000000000000000000098
+:10D890000000000000000000100000030000000075
+:10D8A0000000000D0000000D3C020801244282200F
+:10D8B0003C030801246382E0AC4000000043202BBD
+:10D8C0001480FFFD244200043C1D080037BD9FFC6E
+:10D8D00003A0F0213C100800261031D83C1C0801A0
+:10D8E000279C82200E0011EA000000000000000DBD
+:10D8F0003C02800030A5FFFF30C600FF34430180AA
+:10D900003C0880008D0901B80520FFFE00000000E2
+:10D91000AC64000024040002A4650008A066000AAC
+:10D92000A064000BAC6700183C03100003E0000883
+:10D93000AD0301B83C0560008CA24FF80440FFFE27
+:10D9400000000000ACA44FC03C0310003C040200E7
+:10D95000ACA44FC403E00008ACA34FF89486000CBD
+:10D9600000A050212488001400062B02000510801E
+:10D97000004448210109182B10600011000000002C
+:10D98000910300002C6400095080000991190001E6
+:10D99000000360803C0D080125AD80E4018D582115
+:10D9A0008D67000000E000080000000091190001F0
+:10D9B000011940210109302B54C0FFF291030000EE
+:10D9C00003E00008000010210A000CBE2508000139
+:10D9D000910F0001240E000A15EE00400128C82313
+:10D9E0002F38000A1700003D250D00028D58000059
+:10D9F000250F0006370E0100AD4E0000910C00020D
+:10DA000091AB000191A4000291A60003000C2E002E
+:10DA1000000B3C0000A7102500041A000043C82595
+:10DA20000326C025AD580004910E000691ED0001BB
+:10DA300091E7000291E50003000E5E00000D640016
+:10DA4000016C30250007220000C410250045182570
+:10DA50002508000A0A000CBEAD430008910F000122
+:10DA6000250400022408000255E8000101202021BD
+:10DA70000A000CBE00804021910C0001240B000321
+:10DA8000158B0016000000008D580000910E00025A
+:10DA900025080003370D0008A14E00100A000CBE37
+:10DAA000AD4D000091190001240F0004172F000B49
+:10DAB0000000000091070002910400038D43000064
+:10DAC00000072A0000A4102534660004250800047D
+:10DAD000AD42000C0A000CBEAD46000003E0000899
+:10DAE0002402000127BDFFE8AFBF0014AFB0001053
+:10DAF0000E0014E0008080213C0480083485008002
+:10DB000090A600052403FFFE0200202100C310247C
+:10DB10008FBF00148FB00010A0A200050A0014EA05
+:10DB200027BD001827BDFFE8AFB00010AFBF00143D
+:10DB30000E000F4E008080213C06800834C5008016
+:10DB400090A4000024020050308300FF1062000700
+:10DB50003C098000020020218FBF00148FB000100C
+:10DB6000AD2001800A00101027BD00182408010014
+:10DB70003C078000020020218FBF00148FB00010EE
+:10DB8000ACE801800A00101027BD001827BDFF7007
+:10DB90003C088008AFB60080AFB5007CAFB1006C28
+:10DBA000AFBF008CAFBE0088AFB70084AFB40078C1
+:10DBB000AFB30074AFB20070AFB00068350500803D
+:10DBC0003C0780008CF2012890A40009ACE000849E
+:10DBD00090A60005309100FF0000A821000618273C
+:10DBE000306200010000B02114400067AFA0005077
+:10DBF00090A9000024050020312400FF10850016A4
+:10DC0000240A0050108A008C000000003C0C080020
+:10DC10008D8C00DC258B00013C010800AC2B00DC66
+:10DC20000E0015D6000000008FBF008C8FBE00884C
+:10DC30008FB700848FB600808FB5007C8FB40078DA
+:10DC40008FB300748FB200708FB1006C8FB000681A
+:10DC500003E0000827BD00900000000D3C1080008C
+:10DC6000AFA00030961F01168E1901043C1E002043
+:10DC700036130C00033EC0240018B82B00173140A7
+:10DC8000AFA600308E0E010433F4FFFF3C0F0040BE
+:10DC90000293802101CF68249213000D11A0004847
+:10DCA00034C40040326200201440000234860080F8
+:10DCB0000080302114C00093AFA600303C058008DE
+:10DCC00034A800809107000830E6004050C00006EC
+:10DCD0003C06800824090004122900A2240A00122C
+:10DCE000122A00293C06800834D401003C17800029
+:10DCF00096EF011A960D000E928E0008326B00040A
+:10DD000031F7FFFF01CD6004AFAC00548E14000466
+:10DD1000116000318E1E000834C300809079000825
+:10DD20003338004017000028000000008C730050BA
+:10DD300002939023064000063C0C80008C7E003449
+:10DD4000029E8023060200838EA200083C0C800005
+:10DD5000AD800044240200018FBF008C8FBE00887C
+:10DD60008FB700848FB600808FB5007C8FB40078A9
+:10DD70008FB300748FB200708FB1006C8FB00068E9
+:10DD800003E0000827BD00900E000D1A00002021BE
+:10DD90008FBF008C8FBE00888FB700848FB6008045
+:10DDA0008FB5007C8FB400788FB300748FB2007091
+:10DDB0008FB1006C8FB0006803E0000827BD0090B1
+:10DDC0000A000D7A00C020210E00163702802021A3
+:10DDD0001440FFDF3C0C80003C038008346300806B
+:10DDE0008C6200340282F82307E000170000000074
+:10DDF0003C1508008EB5310026B100013C01080039
+:10DE0000AC3131000E0014E0024020213C0B8008B0
+:10DE100035700080920A002502402021354200041E
+:10DE20000E0014EAA20200250E000C9E02402021E2
+:10DE30000A000DA7240200013C15080126B582D076
+:10DE40000A000D693C1080008C6600300286202399
+:10DE5000188000082409000C3C0808008D083100D7
+:10DE6000327300FC0000B821250700013C010800C6
+:10DE7000AC273100AFA900308C65003000B43823E6
+:10DE800018E000DB02E7502A1540FFDE000000002A
+:10DE900012E7002A02E768230287A02131B7FFFFBB
+:10DEA000326E000211C00034327F00103C14800832
+:10DEB00036900080920F000831F6004052C000CE2C
+:10DEC0008EA20008024020210E0014E02413001846
+:10DED000A2130009921800052419FFFE0240202118
+:10DEE0000319B8240E0014EAA2170005240400390F
+:10DEF000000028210E001612240600180A000DA7A3
+:10DF00002402000192B6000C3C0480083483008097
+:10DF10008C6700380016AB0036B10081024020212A
+:10DF20003225F0810E000C8D30C600FF3C0C8000C5
+:10DF3000AD8000440A000DA7240200013A6C0001E4
+:10DF4000318B00011560FFAF0287A0210A000DF898
+:10DF5000000000000040F809240400160A000DA784
+:10DF600024020001024020210E0017170200282180
+:10DF70000A000D5C8FBF008C13E0FF743C03800827
+:10DF8000346800808D0400388C66000403C61023BA
+:10DF90001C40FF6F3C0C800003C4282304A2000136
+:10DFA0000080F021AFB40010AFB70014AFA7001885
+:10DFB0003C1F800097E301208D0900309506005C2E
+:10DFC0008FB900548FAC00303062FFFF30D8FFFFB4
+:10DFD0000047702137EF40000338682B01CF5821EC
+:10DFE000018D5025AFAB0020AFA90028AFAA0030AB
+:10DFF000AFA90024AFA0002CAFBE003491070008E9
+:10E0000030E400081480008F020020218EA200045A
+:10E010000040F80927A400108FA900303128000221
+:10E0200055000001327300FE3C048008348C0080EF
+:10E03000918B0008316A0040514000128FA40024E7
+:10E040008C8D000411BE00BE240E00143265000148
+:10E0500010A0000C8FA400242404000C122400D46F
+:10E060002A27000D10E000CE2409000E2408000A23
+:10E0700052280001241600088FA200242444000125
+:10E08000AFA400248FA600143C03800834650080F0
+:10E090000086F8218CB10030ACBF003090B9004E42
+:10E0A0008CAE00303418FFFF0338780401CF6821AC
+:10E0B000ACAD00348FA600308FAC005430CA0008DD
+:10E0C00003CC58211140000CAFAB00588CA40020A9
+:10E0D0008FB000581090009430C600FF92A2000C40
+:10E0E0008FA700340240202100024B003528008019
+:10E0F0000E000C8D3105F0803C0C800835900080BE
+:10E100008E0B003001715023194000702659008099
+:10E110003C1808008F183198241FFF80033F782493
+:10E12000332D007F3C0680003C0E8004331100102C
+:10E13000ACCF00901220003401AE282190A3006BD8
+:10E14000546000323C10800824070001A0A7006B37
+:10E1500094C4007A2486000AA60600123C0D8008AA
+:10E1600035A5008090B10008322C004015800004D5
+:10E170003C038008326E000115C000620000000000
+:10E18000346400808C8F00208FB3005811F3000A94
+:10E19000346301008C7900000299C0231B000077D2
+:10E1A0008FA80058AC880020AC7400002414000133
+:10E1B000AC7E0004AFB4005016C000370000000071
+:10E1C0008FA40050148000300000000012E0000511
+:10E1D000000018218FA900303137000452E0FE9270
+:10E1E00000601021240300010A000D5B0060102173
+:10E1F0000A000DF9000038210040F8092404001736
+:10E200000A000DA7240200013C108008361000808F
+:10E2100024090001024020210E0014E0A60900128A
+:10E220009208002524050001AFA500503502000129
+:10E23000024020210E0014EAA20200250A000EA9C5
+:10E240003C0D800827A50038AFA800600E000CA880
+:10E25000AFA000381440FF6D8FA800608FA5003874
+:10E2600030B001005200FF6A8EA200048FA3003C70
+:10E270008D070058006720230483FF64AD03005816
+:10E280000A000E558EA200040E000C9E02402021B2
+:10E290000A000EC4000000000E0014E0024020211D
+:10E2A0003C05800834A30080024020210E0014EABF
+:10E2B000A076000902C03021240400370E00161297
+:10E2C000000028210A000EC28FA400508FA200185F
+:10E2D0005840FFA33C0D80080E0014E002402021AE
+:10E2E000920A0025240B0001AFAB00503542000418
+:10E2F000024020210E0014EAA20200250A000EA905
+:10E300003C0D80088CB600308EBE00082404001836
+:10E3100026D5000103C0F809ACB500308FB200303B
+:10E320000A000D5B324200043C07800094E5011AAC
+:10E3300050A0FF6A34C600100A000E8992A2000C99
+:10E34000122E002A2A2F001511E0001E2419001693
+:10E350002418000C5638FF3E326500013C1F80082F
+:10E3600093E3001B2410FFBD2416000E0070302420
+:10E37000A3E6001B0A000E65326500018C7F0000D9
+:10E3800017F4FF8D000000008C67000403C73023E2
+:10E3900004C1FF848FA800580A000EBF00000000CF
+:10E3A0001629FF368FA200240A000E7024160010D2
+:10E3B0002411000E52D1FF30241600100A000E6FF7
+:10E3C000241600165639FF22326500013C1F8008D2
+:10E3D00093E3001B2410FFBD2416001000703024AE
+:10E3E000A3E6001B0A000E65326500010A000E64F8
+:10E3F000241600123C0380008C6201B80440FFFE2A
+:10E4000024040800AC6401B803E000080000000028
+:10E4100030A5FFFF30C6FFFF3C0780008CE201B84B
+:10E420000440FFFE34E80180AD040000ACE40020AD
+:10E430003C048008948300483063FFFF1060001D97
+:10E440003C0B800024AA0012006A482B5120001ABD
+:10E45000240A000394F901208F890000240C001A7B
+:10E460003338FFFF2707FFFE0067782B39EE0001E6
+:10E4700000096B8201AE5824A10C000B116000470B
+:10E480008F830004A50700148F880004350700015E
+:10E49000AF87000430CC00405580000F3C0880005E
+:10E4A0003C0C800035840180A485000E0A000F9882
+:10E4B0008F8F000C240A00033564018030CC0040AB
+:10E4C0008F8900008F870004A08A000B5180FFF520
+:10E4D0003C0C80003C088000950301203C0880082B
+:10E4E000951800403079FFFF272EFFFE330FFFFF06
+:10E4F00001CF682B11A0000301C02021950200402C
+:10E500003044FFFF3C0B800000A4502335650180A0
+:10E51000A4A4000EA4AA00248F8F000C3C05800048
+:10E5200034AE01802418000230ED8000A5D8000C24
+:10E53000A5C90010ADCF0028A5C6000811A0000E87
+:10E540003C04800094AA01163142FFFC24480004D8
+:10E55000010518218C7940003326FFFF14C0000705
+:10E56000240EBFFF3C0BFFFF35657FFF00E538241D
+:10E57000AF8700043C048000240EBFFF348C018070
+:10E5800000EE6824A58D0026AD89002C3C07100004
+:10E59000AC8701B803E00008000000002402FFFE81
+:10E5A000006238240A000F76AF8700043C05800023
+:10E5B00034A400708C8A000090A601128F840000A1
+:10E5C00027BDFFF030C300FF000318823082010036
+:10E5D00000003821104000392466000330874000D5
+:10E5E00050E0003930882000000610800045C82126
+:10E5F0008F2F40002478000400187080AFAF000017
+:10E6000001C568218DAC4000AFAC000494AB01168D
+:10E610003169FFFC012540218D054000AFA50008B0
+:10E620008FA9000800003021000028213C070800C5
+:10E6300024E701000A000FE92408000890420000C6
+:10E6400024A500012CAD000C0062C8210019C08077
+:10E65000030778218DEE000011A0000600CE3026C1
+:10E6600003A5102114A8FFF500051A005520FFF49A
+:10E67000904200003C048000348700703C05080094
+:10E680008CA531048CE300002CA8002011000009A7
+:10E69000006A3823000558803C0C0800258C31089E
+:10E6A000016C482124AA0001AD2700003C010800AC
+:10E6B000AC2A3104AF86000C2407000100E01021D1
+:10E6C00003E0000827BD00101100FFFC0000382106
+:10E6D00000066080018558218D6440002469000493
+:10E6E00000093880AFA4000000E518218C664000C6
+:10E6F000AFA000080A000FD9AFA6000427BDFFD8BD
+:10E70000AFB20018AFB00010AFBF0024AFB400200C
+:10E71000AFB3001CAFB100148F8700003C04800031
+:10E720009483010E30E24000000080211040001070
+:10E730003072FFFF3C06002000E6282410A0000DE8
+:10E7400030EA80008F8800042409BFFF00E93824E4
+:10E7500035031000AF87000030F120001620000BB9
+:10E760003C1400042418FFBF0A001038007810245D
+:10E7700030EA8000154000863C0C002030F120007B
+:10E780001220FFF88F8300043C14000400F4982446
+:10E790001260FFF52418FFBF3462004030F9010019
+:10E7A0001320000FAF8200043C02002000E2F82496
+:10E7B00013E000053C0B80003C04000400E4182436
+:10E7C000106000CF00000000956A011E9569011CD1
+:10E7D0003146FFFF0009440000C82825AF85000C22
+:10E7E0003C0E800095CD010C8DC44000340CFFFF21
+:10E7F000108C00B031A5FFFF308F010055E0000103
+:10E800002410001030F110005220000836110001D1
+:10E8100030F300201660009F3C18100000F8A02480
+:10E82000168000963C040C003611000130E801000F
+:10E830001500000B3C0A00018F88000431094000DC
+:10E840001520000800EA30243C0C1F0100EC58247D
+:10E850003C0A1000516A00AE30AD02003C0A0001D3
+:10E8600000EA302414C000953C05100000E5202487
+:10E8700000004021108000070000902100079E0248
+:10E880003272000F001278803C0E080125CE828083
+:10E8900001EE40218F940018128000470220802151
+:10E8A00010800091000000003C0980009539010EA5
+:10E8B00091030000022030213338FFFF27050004B8
+:10E8C000106000080000A021241F0003107F013AFF
+:10E8D00024040002910C00011184011830EA004068
+:10E8E0000012A1C08F92001C524000013626004049
+:10E8F0003C1380008E6F400031F10100122000CBEC
+:10E9000030D1FFFB3C1808008F18002430D20004DF
+:10E910003306000414C000CC30B0FFFF56400001A5
+:10E920003631000402802021020028210E000F55FC
+:10E93000022030211640000D0000202136650180A4
+:10E940003C0480008C9301B80660FFFE241920006F
+:10E9500024140002A4B90008A0B4000BA4A0001065
+:10E960003C051000AC8501B8000020218FBF0024B9
+:10E970008FB400208FB3001C8FB200188FB1001429
+:10E980008FB000100080102103E0000827BD002890
+:10E9900000EC58241160FF7A30F120008F8D0004C4
+:10E9A0003C0FFFFF35EE7FFF00EE382435A38000DB
+:10E9B0000A001027AF8700003C0208008C42003894
+:10E9C0003C040800248400381040004B2449FFFF19
+:10E9D0003C038000946C010E318BFFFF110000A0FE
+:10E9E000257300043C1008008E1000301200000A4D
+:10E9F00030E601008F8A00043143400010600006B9
+:10EA00003C0F0F0000EF70243C0D010001AE402BC5
+:10EA1000110000DF3265FFFF10C000693C140F00D9
+:10EA200000F428243C18020010B800658F99000CEF
+:10EA30003270FFFF03299824026490219249000458
+:10EA400025270004000721C00200282136260002E5
+:10EA50000E000F55000000008FBF00248FB400206F
+:10EA60008FB3001C8FB200188FB100148FB000104C
+:10EA70000000102103E0000827BD00283C020BFF26
+:10EA800000E41824345FFFFF03E3C82B5320FF6723
+:10EA9000361100013C0608008CC6002C361100051A
+:10EAA00024D000013C010800AC30002C0A00105DAD
+:10EAB00030E801000A0010522410002002402821F2
+:10EAC0003C1208008E5200D824040080264D00011C
+:10EAD0003C010800AC2D00D80E000F5524060003A1
+:10EAE0000A0010E88FBF00243C0808012508828036
+:10EAF0000A00107C3C0980000A0010C50000482173
+:10EB00000E000FBC000000000A0010498F870000B3
+:10EB100015A0FF533C0A00012645000430AAFFFF60
+:10EB2000362600023C0380008C7201B80640FFFECE
+:10EB30008F85000834690180AD20000010A000AF6F
+:10EB40003C048000254F001200AF702B51C000AC78
+:10EB500024030003947801202414001A30F14000AB
+:10EB60003313FFFFA134000B122000B62663FFFE13
+:10EB700000A3C82B572000B4241FFFFE3508000156
+:10EB8000A5230014AF8800043C108000240CBFFFB4
+:10EB9000010C4824240B000236080180A50B000C50
+:10EBA000A50A000EA5060008A5090026A507001065
+:10EBB0003C071000AE0701B80A0010E88FBF002420
+:10EBC0003C0308008C6300D02E45000C001221C0CD
+:10EBD000386B00012D6200010045F82417E0FF9A10
+:10EBE0003270FFFF264CFFFC2D840004548000503F
+:10EBF00000002021386A00022D43000100658024B6
+:10EC00001600004A3270FFFF00076A420012702BA4
+:10EC100001AE40245500006300002021001221C0F5
+:10EC2000020028210A0010E53626000234DF000227
+:10EC30000280202133E6FFFF0E000F5530A5FFFFB5
+:10EC40000A0010AC00002021240401000200282149
+:10EC50000E000F55022030210A001098000000001D
+:10EC60008C66400030CF010011E0003D30F801001B
+:10EC70003C1208008E5200241300001132340004AC
+:10EC80003C1F0F0000FFC8243C0502001325000CA8
+:10EC90008F8C000C022030213265FFFF018958243F
+:10ECA00001641021904900043230FFFB2411FFFE63
+:10ECB000252700040E000F55000721C002519024A3
+:10ECC0002404000112440052324300011460005831
+:10ECD00002003021324A0004114000048F8D0000F0
+:10ECE00031A808001500005A3265FFFF1680FF5B4F
+:10ECF0008FBF00243C138000366501803C048000F7
+:10ED00008C9001B80600FFFE24062000240F0002AC
+:10ED1000A4A60008A0AF000BA4A000103C0E100099
+:10ED2000AC8E01B80A0010E88FBF0024000020213B
+:10ED3000020028210A0010E5362600021140FEE9F3
+:10ED40000000A021952E0110950D000231C8FFFF93
+:10ED500051A8FEE40012A1C00A00108B8F92001C83
+:10ED60003C0508008CA5002430B800015300FF3B8F
+:10ED70008FBF00243265FFFF3626000200002021ED
+:10ED80000E000F55000000000A0010E88FBF00249D
+:10ED9000362600020E000F55240400800A0010E8F9
+:10EDA0008FBF0024020028210E000F553226FFFBE2
+:10EDB0000A001159001221C0910300012402000130
+:10EDC0001062FEEA24040001241000021470FEC543
+:10EDD0000000A02130E300401060FEC38F92001CB1
+:10EDE000952B0110950900023167FFFF1127FEE006
+:10EDF0008FBF00240A00108B0000000024030003D2
+:10EE000034820180A043000B0A0011343C108000C2
+:10EE100032140004168000033265FFFF3612000230
+:10EE20003250FFFF020030210A0011B10000202102
+:10EE3000000020210E000F553265FFFF0A001186E9
+:10EE40003210FFFB241FFFFE0A001132011F402475
+:10EE5000020030210E000F55240401000A00118C1D
+:10EE60000000000027BDFFC8AFB00010AFBF0034E6
+:10EE70003C10600CAFBE0030AFB7002CAFB600281E
+:10EE8000AFB50024AFB40020AFB3001CAFB2001880
+:10EE9000AFB100148E0C5000240DFF7F3C058000A4
+:10EEA000018D5824356A380C24090003AE0A50003D
+:10EEB000ACA900083C010800AC2000200E0017435C
+:10EEC000000000003C0560168CA700003C08FFFF16
+:10EED0003C06001034C3805100E820243C02535308
+:10EEE000AE03537C1082026134A37C008C74007CDE
+:10EEF0008C7500783C116000362420203C05080108
+:10EF000024A581142406000A3C1180003C13000251
+:10EF10003C12600CAF950010AF9400140E0015EC7D
+:10EF2000363E0180AE5353FC8E3000003216000393
+:10EF300012C0FFFD3217000116E000583206000231
+:10EF400010C0FFF93C0480008C8F01402410004069
+:10EF5000AC8F00208C9201480012760231C3007001
+:10EF60001070013D2C67004150E00008240400604F
+:10EF7000241500201075000E3C0340003C07800063
+:10EF8000ACE301780A00121B000000001464FFFBD0
+:10EF90003C0340000E001F5D000000003C034000E9
+:10EFA0003C078000ACE301780A00121B000000005F
+:10EFB0008C830148241400043487018000034C0230
+:10EFC000312500FF8C83014010B4017124BFFFFA8A
+:10EFD0002FF90006532000123C0580008C86014466
+:10EFE000241600FF30A500FF30CB00FF30CA00FF21
+:10EFF000115601BC256800042402000910A201AAD0
+:10F0000028AC000A118001962413000A240D000880
+:10F0100010AD00148F850018000819C03C05800051
+:10F020008CA801B80500FFFE24170002ACE3000025
+:10F03000A4E90008A0F7000B8CB401483C091000BB
+:10F040003C034000A4F400108CA40144ACE4002470
+:10F050003C078000ACA901B8ACE301780A00121BA0
+:10F060000000000000067A020008A8803C040801A5
+:10F070002484828024AE000102A4902131E500FFA7
+:10F0800024100001A24F000014B0FFE3AF8E00185F
+:10F09000000819C00A001258AF85001C8E340128E0
+:10F0A0003C028008AE3400208E2401048E2301002F
+:10F0B000945F0048AF840000AF83000433F9FFFF82
+:10F0C0000E000F4EAF9900083C1808008F1800C0C2
+:10F0D000130000248F8700003C0708008CE700C461
+:10F0E00024E600013C010800AC2600C43C0380007B
+:10F0F0008C6401243C076020ACE400140000000094
+:10F100003C0680003C154000ACD5013800000000F2
+:10F110005280FF8B32060002268C0140268D008033
+:10F120002409FF800189282401A99824001359404B
+:10F1300031A2007F0005B140318A007F3C1F2000D2
+:10F1400037E800020162C02502CAC8250328A025AD
+:10F150000308B825ACD70830ACD408300A00122117
+:10F16000320600023C05001000E54024150000A610
+:10F170008F8300043C0C08008D8C00203C0D800027
+:10F1800095AA010E258B000130E940003C010800E2
+:10F19000AC2B00203155FFFF112000B6000090215C
+:10F1A0003C0F002000EF702411C000B330F7800046
+:10F1B0008F9300042416BFFF00F638243663100036
+:10F1C000AF87000030E22000104000B62405FFBFEA
+:10F1D0003C08000400E8302410C000020065102440
+:10F1E0003462004030E901001120000EAF820004BB
+:10F1F0003C0B002000EB5024114000043C0D0004A7
+:10F2000000ED602411800139000000009637011ED6
+:10F210009636011C32EFFFFF00169C0001F37025AB
+:10F22000AF8E000C9639010C8E2440003418FFFF7D
+:10F23000109800CA3325FFFF309F010057E00001FE
+:10F240002412001030E31000106000133653000148
+:10F2500030E400201480000A3C06100000E6102470
+:10F260001040000D3C0C0C003C0B0BFF00EC50243C
+:10F270003569FFFF012A402B1100000830EE010024
+:10F280003C0D08008DAD002C3653000525B2000161
+:10F290003C010800AC32002C30EE010015C0000B20
+:10F2A0003C0600018F880004310F400055E0000843
+:10F2B00000E628243C181F0100F8B8243C16100072
+:10F2C00052F6010E30B902003C06000100E6282487
+:10F2D00014A000A43C1F100000FF202400004021C7
+:10F2E000108000070000A82100075E023175000FA2
+:10F2F000001550803C0208012442828001424021D6
+:10F300008F8C001811800069026090211480000326
+:10F310003C0980003C080801250882809532010ED6
+:10F3200091030000026030213244FFFF2485000475
+:10F33000106000080000B821240D0003106D0122A8
+:10F34000241600029117000112F6002630F8004042
+:10F350000015B9C08F82001C504000013666004085
+:10F360003C1680008ECA400031530100126000C775
+:10F3700030D500043C0B08008D6B002430D3FFFB1C
+:10F380003166000414C0010A30B2FFFF56A000012C
+:10F390003673000402E02021024028210E000F55A0
+:10F3A0000260302116A0000D0000202136C501802A
+:10F3B0003C0480008C8C01B80580FFFE240D2000E9
+:10F3C00024120002A4AD0008A0B2000BA4A00010FB
+:10F3D0003C051000AC8501B8000020210A00135F35
+:10F3E000008010211300FFDB0000B821953F0110C1
+:10F3F0009519000233E8FFFF5328FFD60015B9C066
+:10F400000A0013278F82001C2413BFFF0073682497
+:10F4100011A00007240E87FF006E48241520000A63
+:10F420003C0F006000EF9024124000070000000035
+:10F430000E000D34000000001040FF323C0680003A
+:10F440000A00128D3C0380000E0014C90000000069
+:10F450000A00135F000000000E0014EF000000001F
+:10F460003C0340003C078000ACE301780A00121B1B
+:10F470000000000030F7800012E0FF528F8300048C
+:10F480003C19002000F9C0241300FF4E8F9F000498
+:10F490003C04FFFF34837FFF00E338240A0012C1DD
+:10F4A00037E380000A0012CA006510243C040800FB
+:10F4B0008C840038148000022489FFFF000048215A
+:10F4C0003C038000946F010E31EEFFFF110000EB52
+:10F4D00025D600043C0308008C6300301060000A4D
+:10F4E00030EA01008F9800043317400012E0000654
+:10F4F0003C020F0000E2F8243C190100033F402BBE
+:10F50000110000D532C5FFFF114000303C0C0F0048
+:10F5100000EC58243C0602001166002C000000009C
+:10F520008F95000C3C0D080025AD003832D2FFFF4E
+:10F5300002A9282400ADB02192C7000424E90004E8
+:10F54000000921C002402821366600020E000F5536
+:10F55000000000000A00135F000010210A0012E200
+:10F56000241200203C1908008F3900D802A028215D
+:10F5700024040080273800013C010800AC3800D882
+:10F580000E000F55240600030A00135F000010212F
+:10F590008C84014000E028213C0380008C7701B876
+:10F5A00006E0FFFE2408001CACA40000A0A8000B8D
+:10F5B0003C181000AC7801B83C0340003C078000C8
+:10F5C000ACE301780A00121B000000003C030800B5
+:10F5D0008C6300D02EA5000C001521C0386F0001EF
+:10F5E0002DF200010245702415C0FFD632D2FFFF74
+:10F5F00026B7FFFC2EE40004148000080000202140
+:10F60000386800022D180001030518241060000658
+:10F610000007FA4232D2FFFF0000202102402821D9
+:10F620000A0013A4366600020015102B03E2C8245A
+:10F630001720000532D2FFFF001521C0024028210B
+:10F640000A0013A43666000200002021024028218F
+:10F650000E000F553266FFFB0A0013E0001521C0B3
+:10F6600010B3006A000860802406000B14A6FE6B2D
+:10F67000000819C0000828803C15080126B58280C2
+:10F6800000B530210A001258A0C0000134D5000294
+:10F6900002E0202130A5FFFF0E000F5532A6FFFF2C
+:10F6A0000A001348000020210008B8803C0308012C
+:10F6B0002463828002E31021905400001280FE57E0
+:10F6C000000819C0A04000008F9900182738FFFFDC
+:10F6D0001700FE52AF980018000819C00A0012580F
+:10F6E000AF80001C0A00124F240800030E000FBC5C
+:10F6F000000000000A0012DA8F8700001720FEF3D6
+:10F700003C06000126BF000433E5FFFF3666000219
+:10F710003C0380008C7501B806A0FFFE8F890008AD
+:10F720003C04800034930180AE60000011200099F9
+:10F73000240F000324AA0012012A102B1040009568
+:10F7400000000000946D01203C1280002403001A88
+:10F7500031ACFFFF364A018030EB4000A143000B83
+:10F760001160008F2583FFFE0123702B15C0008DD3
+:10F770002409FFFE35080001A5430014AF880004EA
+:10F780002417BFFF0117B02424080002A7C8000CEB
+:10F79000A7C5000EA7C60008A7D60026A7C7001059
+:10F7A0003C071000AE2701B80A00135F00001021CB
+:10F7B00024040100024028210E000F550260302170
+:10F7C0000A00133400000000910300012415000119
+:10F7D0001075FF0224040001240E0002146EFEDDE9
+:10F7E0000000B82130E300401060FEDB8F82001C77
+:10F7F00095270110950F000230E9FFFF11E9FF0E78
+:10F80000008010210A0013278F82001C3C0F080182
+:10F8100025EF8280018F702100069202A1D20001A3
+:10F820003C1F60008FED1820241000010110980487
+:10F830003C0208012442828201B3B025018250219A
+:10F8400000065C02000819C0A54B0000AFF61820A6
+:10F850000A0012593C058000366600020E000F5562
+:10F86000240400800A00135F000010218CAE000405
+:10F870003C0F60000A00120C01CF18218C6640007A
+:10F8800030CA01001140003730EB01003C15080080
+:10F890008EB5002411600013327700043C0D0F0078
+:10F8A00000ED28243C0C020010AC000E8F84000CEC
+:10F8B0003C0F080025EF00380260302100899024B9
+:10F8C000024F702191C7000432C5FFFF3272FFFB67
+:10F8D00024E90004000921C00E000F552413FFFE87
+:10F8E00002B3A8242403000112A3003032B800019F
+:10F8F0001300000732A8000402403021000020213C
+:10F900000E000F5532C5FFFF3252FFFB32A8000434
+:10F91000110000048F9F000033F908005720002BCE
+:10F9200032C5FFFF16E0FEC4000010213C16800027
+:10F9300036C401803C0580008CA201B80440FFFE63
+:10F94000240B200024060002A48B0008A086000BD4
+:10F95000A48000103C0A1000ACAA01B80A00135F92
+:10F96000000010213C0508008CA5002430AC0001EB
+:10F970005180FEB10000102132C5FFFF3666000243
+:10F98000000020210E000F55000000000A00135F48
+:10F9900000001021A3CF000B0A0014322417BFFF70
+:10F9A0002409FFFE0A0014300109402432550004E6
+:10F9B00016A0000332C5FFFF3657000232F2FFFFE8
+:10F9C000024030210A0014B2000020210240302100
+:10F9D0000E000F55240401000A00149A00000000D4
+:10F9E0003C0380008C6401003082003E144000081B
+:10F9F00000000000AC6000488C66010030C507C004
+:10FA000010A0000500000000AC60004CAC6000508D
+:10FA100003E0000824020001AC600054AC60004028
+:10FA20008C6801003107380010E0FFF90000000089
+:10FA30002402000103E00008AC6000443C03900095
+:10FA400034620001008220253C038000AC64002069
+:10FA50008C65002004A0FFFE0000000003E0000809
+:10FA6000000000003C028000344300010083202598
+:10FA700003E00008AC44002027BDFFD8AFB100145C
+:10FA80003C048000AFBF0020AFB3001CAFB2001831
+:10FA9000AFB000108C9201408C9001482402000EFF
+:10FAA00000108C02322300FF106200590204282447
+:10FAB0002866000F10C00013286A003724070006CC
+:10FAC0001067008E286800075100002D24040009EB
+:10FAD000106000783C06800024090001106900B025
+:10FAE000000000000000000D8FBF00208FB3001C3D
+:10FAF0008FB200188FB100148FB0001003E000081F
+:10FB000027BD002811400059240D0038286B00350E
+:10FB1000116000053C058000240C001F146CFFF1EF
+:10FB2000000000003C0580008CB801B80700FFFE13
+:10FB300034B90180AF320000241F000124120002FA
+:10FB40003C021000AF200004A7310008A33F000AC8
+:10FB5000A332000BA7300010AF200024AF200028F4
+:10FB6000ACA201B88FBF00208FB3001C8FB2001869
+:10FB70008FB100148FB0001003E0000827BD0028EB
+:10FB8000106400232405000B1465FFD63218FFFF14
+:10FB9000170000203C0580008F93FEEC927F00054B
+:10FBA00033F900041720FFCF000000000E0014E01E
+:10FBB00002402021926900050240202135280004DE
+:10FBC0000E0014EAA26800059267000530E2000406
+:10FBD00014400002000000000000000D926B0000C5
+:10FBE00024060020316A00FF1546000A3C0580000B
+:10FBF0008CA401B80480FFFE34AD0180240E000502
+:10FC00003C0C1000ADB20000A1AE000BACAC01B8D2
+:10FC10003C0580008CA301B80460FFFE34AF018076
+:10FC200024130002ADF20000ADF20004A5F10008BB
+:10FC3000A1F3000AA1F3000BA5F00010ADE0002431
+:10FC40008CB101443C101000ADF10028ACB001B8FB
+:10FC50008FBF00208FB3001C8FB200188FB100142B
+:10FC60008FB0001003E0000827BD0028106DFFAD25
+:10FC7000240E0080146EFF9B000000003C058000F5
+:10FC80008CA301B80460FFFE34AF0180241200028F
+:10FC9000A1F2000BA5F10008A5F000108CB30144FF
+:10FCA0003C021000A5F30012ACA201B80A00152B0B
+:10FCB0008FBF00208CC301B80460FFFE34D30180E5
+:10FCC000AE720000AE60000424120001A6710008AC
+:10FCD00024110002A272000AA271000BA67000108B
+:10FCE0008CD001443C0F1000AE700024AE600028A0
+:10FCF000ACCF01B80A0015668FBF00203C0380001E
+:10FD00008C6601B804C0FFFE346201803C06080125
+:10FD100090C682C0AC52000010C000030000382121
+:10FD20003C0708018CE782C83C05800034AA0180AA
+:10FD30002404000234CC0001AC470004A5510008A3
+:10FD4000A14C000AA144000BA55000108CAB01444B
+:10FD50000000202101402821AD4B002410C00003E9
+:10FD60008FBF00203C0408018C8482C48FB3001C28
+:10FD70008FB200188FB100148FB000103C0E10002D
+:10FD80003C0D800027BD0028ACA40028ADAE01B812
+:10FD90003C010801A02082C003E000080000000030
+:10FDA00010A0000B3C0680008C980144241900022E
+:10FDB0003C010801A03982C03C010801AC3282C874
+:10FDC0003C010801AC3882C40A0015668FBF0020D0
+:10FDD0008CDF01B807E0FFFE34C701802409000270
+:10FDE000ACF20000ACF20004A4F10008A0E9000AA3
+:10FDF000A0E9000BA4F00010ACE000248CC8014482
+:10FE00003C021000ACE80028ACC201B80A0015663C
+:10FE10008FBF002027BDFFE8AFBF00100E000F4EC0
+:10FE2000000000003C0280008FBF00100000202175
+:10FE3000AC4001800A00101027BD00183084FFFF7D
+:10FE400030A5FFFF1080000700001821308200015C
+:10FE50001040000200042042006518211480FFFBBE
+:10FE60000005284003E000080060102110C00007D2
+:10FE7000000000008CA2000024C6FFFF24A500049F
+:10FE8000AC82000014C0FFFB2484000403E00008DF
+:10FE90000000000010A0000824A3FFFFAC860000B3
+:10FEA00000000000000000002402FFFF2463FFFFA9
+:10FEB0001462FFFA2484000403E00008000000003C
+:10FEC00027BDFFE8AFBF0014AFB000100E0014E074
+:10FED000008080213C0480083483008090650025E8
+:10FEE0000200202134A200200E0014EAA0620025A6
+:10FEF000020020218FBF00148FB000100A000C9E5A
+:10FF000027BD00183C03800027BDFFF83462018044
+:10FF1000AFA20000308C00FF30AD00FF30CE00FFFC
+:10FF20003C0B80008D6401B80480FFFE00000000DF
+:10FF30008FA900008D6801288FAA00008FA70000FC
+:10FF40008FA400002405000124020002A085000AFD
+:10FF50008FA30000359940003C051000A062000B03
+:10FF60008FB800008FAC00008FA600008FAF00009C
+:10FF700027BD0008AD280000AD400004AD8000247E
+:10FF8000ACC00028A4F90008A70D0010A5EE0012CF
+:10FF900003E00008AD6501B83C06800827BDFFE816
+:10FFA00034C50080AFBF001090A7000924020012E2
+:10FFB00030E300FF1062000B008030218CA800505D
+:10FFC00000882023048000088FBF00108CAA003412
+:10FFD000240400390000282100CA48230520000518
+:10FFE000240600128FBF00102402000103E0000865
+:10FFF00027BD00180E001612000000008FBF001071
+:020000040001F9
+:100000002402000103E0000827BD001827BDFFC837
+:10001000AFB1002C00A08821AFB2003027A500109E
+:100020000080902102202021AFBF0034AFB0002813
+:100030000E000CA8AFA000101440009B3C078008E5
+:1000400034E400809086000830C5000814A00069E0
+:100050008FA700103C18800837100080920F00080E
+:1000600031EE000815C00002240800030000402102
+:100070003C0B800891650011916A00123566008082
+:100080008CDF0054314900FF0128202130A300FFFC
+:10009000000410800062282100BFC82B1320000834
+:1000A0000000000094D0005C8CCF0054320DFFFFA4
+:1000B00001E5702301AE602B118000940000000068
+:1000C00094D9005C3323FFFF30FF000413E0007479
+:1000D000000830808FA8001C0068102B5040004F93
+:1000E00030E30004006610232C46008010C000029C
+:1000F00000408021241000800E0014E002402021E6
+:100100003C0380083466008024070001ACC7000C63
+:1001100090C800080010684034670100311F007F5C
+:10012000A0DF00088E39000427380001ACD8003069
+:10013000A4D0005C8CCF003C9630000E01F0702102
+:10014000ACCE00208CCC003C018D5821ACCB001CE7
+:100150008E2A0004ACEA00008E290008ACE90004F5
+:100160008FA5001030A400085480003293A6002010
+:10017000A0C0004E90C9004E2402FFDF3C1880084A
+:10018000A0E9000890C50008370D0080240A00503F
+:1001900000A22024A0C400088E390008ADB90038A0
+:1001A0008F0F00148DB0003001F07021ADAE00341F
+:1001B00091AC0000318B00FF116A002C2645010034
+:1001C0000E0014EA024020212404003800002821F7
+:1001D0000E0016122406000A8FBF00348FB20030C2
+:1001E0008FB1002C8FB000282402000103E000082A
+:1001F00027BD003830E801001100003D8FA3001436
+:100200008C8A0058006A48230520FF933C18800818
+:10021000AC8300580A0016668FA700102407021846
+:100220001060FFB100E610238FA2001C0A00168B9D
+:10023000004610233C188008370D0080A0E6000817
+:100240008E390008240A0050ADB900388F0F001411
+:100250008DB0003001F07021ADAE003491AC0000E3
+:10026000318B00FF156AFFD6264501002406FF806A
+:1002700000A610243C098000AD2200288E2700082B
+:1002800030A3007F3C04800C0064F821AFE700D06D
+:100290008E280008AF9F00280A0016C1AFE800D4DE
+:1002A0000A0016882C6202188E2300083C0480087D
+:1002B00034820080AC430054024020210E0016011D
+:1002C000AC400030240400382405008D0E001612C6
+:1002D000240600128FBF00348FB200308FB1002C83
+:1002E0008FB000282402000103E0000827BD003879
+:1002F000AC800058908C0008240DFFF7018D582425
+:10030000A08B00080A0016668FA700108CD8005436
+:100310000A0016830305182327BDFFE8AFBF0010AE
+:1003200090A6000D30C7001010E0000C00804021A6
+:100330003C0280088C4400048CA300081064000870
+:1003400030C9000430C5000410A0001C8FBF00108D
+:100350002402000103E0000827BD001830C9000492
+:100360001120001030CB001210E0FFF98FBF0010F9
+:100370003C0880088CA700088D06000414E6FFF5F1
+:1003800024020001240400382405008D0E001612FA
+:10039000240600128FBF00102402000103E00008B1
+:1003A00027BD0018240A0012156AFFE98FBF00104C
+:1003B000010020210A00165427BD0018000020214A
+:1003C0000A000D1A27BD00183C05080024A55D5041
+:1003D0003C04080024847B103C02080024425D5841
+:1003E000240300063C010801AC2582D03C01080131
+:1003F000AC2482D43C010801AC2282D83C01080123
+:10040000A02382DC03E000080000000003E00008F5
+:10041000240200013C028000308800FF3447018044
+:100420003C0680008CC301B80460FFFE00000000A1
+:100430008CC501282418FF803C0D800A24AF0100E0
+:1004400001F8702431EC007FACCE0024018D202116
+:10045000ACE50000948B00DA350960002408000246
+:10046000316AFFFFACEA000424020001A4E900089D
+:10047000A0E8000BACE000243C071000ACC701B8BA
+:10048000AF84002803E00008AF8500588C99000471
+:100490008F8D00282409FFBF0325C023AC980004DA
+:1004A00091AF00C42403FFEF31EE007FA1AE00C482
+:1004B0008C8C0020938B00348F860028358A0002B4
+:1004C000AF8B004CA7800048AC8A0020A4C000ACD1
+:1004D00090C800C401093824A0C700C48F84002834
+:1004E000AC8000DC908500C400A3102403E0000869
+:1004F000A08200C43C028000344501803C0480009E
+:100500008C8301B80460FFFE8F8900582407608344
+:1005100024060002ACA900008C880124ACA80004C9
+:10052000A4A70008A0A6000B3C05100003E00008EB
+:10053000AC8501B8938800348F89004C8F820028E5
+:1005400030C600FF0109382330E900FF01221821DD
+:1005500030A500FF2468007810C000020124382173
+:100560000080382130E400031480000330AA000327
+:100570001140000D312B000310A0000900001021D4
+:1005800090ED0000244E000131C200FF0045602BB9
+:10059000A10D000024E700011580FFF925080001E6
+:1005A00003E00008000000001560FFF300000000F9
+:1005B00010A0FFFB000010218CF80000245900045B
+:1005C000332200FF0045782BAD18000024E700041B
+:1005D00015E0FFF92508000403E000080000000012
+:1005E00093850034938800448F87004C00043200C8
+:1005F0003103007F00E5102B30C47F001040000F56
+:10060000006428258F8400283C0980008C8A00DC47
+:10061000AD2A00A43C03800000A35825AC6B00A0C9
+:100620008C6C00A00580FFFE000000008C6D00AC0B
+:10063000AC8D00DC03E000088C6200A80A0017D62D
+:100640008F840028938800453C0280000080502160
+:10065000310300FEA383004530ABFFFF30CC00FF29
+:1006600030E7FFFF344801803C0980008D2401B849
+:100670000480FFFE8F8D005824180016AD0D000079
+:100680008D2201248F8D0028AD0200048D59002099
+:10069000A5070008240201B4A119000AA118000B43
+:1006A000952F01208D4E00088D4700049783004848
+:1006B0008D59002401CF302100C7282100A3202319
+:1006C0002418FFFFA504000CA50B000EA5020010C6
+:1006D000A50C0012AD190018AD18002495AF00D874
+:1006E0003C0B10002407FFF731EEFFFFAD0E002892
+:1006F0008DAC0074AD0C002CAD2B01B88D460020E4
+:1007000000C7282403E00008AD4500208F8800289A
+:100710000080582130E7FFFF910900C63C028000AD
+:1007200030A5FFFF312400FF00041A0000675025A8
+:1007300030C600FF344701803C0980008D2C01B891
+:100740000580FFFE8F820058240F0017ACE20000E6
+:100750008D390124ACF900048D780020A4EA00084A
+:10076000241901B4A0F8000AA0EF000B9523012082
+:100770008D6E00088D6D00049784004801C35021E0
+:10078000014D602101841023A4E2000CA4E5000EB9
+:10079000A4F90010A4E60012ACE000148D78002447
+:1007A000240DFFFFACF800188D0F006CACEF001C9F
+:1007B0008D0E00683C0F1000ACEE0020ACED002464
+:1007C000950A00AE240DFFF73146FFFFACE6002886
+:1007D000950C00709504007231837FFF0003CA00FE
+:1007E0003082FFFF0322C021ACF8002CAD2F01B8EE
+:1007F000950E00728D6A002000AE3021014D282434
+:10080000A506007203E00008AD6500203C028000F0
+:10081000344601803C0580008CA301B80460FFFED3
+:1008200024090018ACC40000A0C9000B8F88002860
+:100830003C041000950700AEA4C70010ACC0003007
+:1008400003E00008ACA401B83C02800034450180FC
+:100850003C0480008C8301B80460FFFE8F8A003066
+:10086000240600199549001C3128FFFF000839C0F3
+:10087000ACA70000A0A6000B3C05100003E0000898
+:10088000AC8501B88F8700380080402130C400FF5C
+:100890003C0680008CC201B80440FFFE8F890058DE
+:1008A0009383005434996000ACA90000A0A3000514
+:1008B0008CE20010240F00022403FFF7A4A200061C
+:1008C000A4B900088D180020A0B8000AA0AF000B42
+:1008D0008CEE0000ACAE00108CED0004ACAD00144A
+:1008E0008CEC001CACAC00248CEB0020ACAB0028E2
+:1008F0008CEA002C3C071000ACAA002C8D090024C7
+:10090000ACA90018ACC701B88D05002000A32024B5
+:1009100003E00008AD040020938500542403000187
+:1009200027BDFFE800A330042CA20020AFB00010C8
+:10093000AFBF001400C01821104000132410FFFEA8
+:100940003C0708008CE7319000E610243C0880004A
+:100950003505018014400005240600848F89002895
+:10096000240A00042410FFFFA12A00EC0E001872D4
+:1009700000000000020010218FBF00148FB0001093
+:1009800003E0000827BD00183C0608008CC631941F
+:100990000A0018A400C310248F87003027BDFFE091
+:1009A000AFB20018AFB10014AFB00010AFBF001C61
+:1009B00030D000FF90E6000D00A08821008090213B
+:1009C00030C5007FA0E5000D8F8500288E2300181C
+:1009D0008CA200C01062002E240A000E0E00189790
+:1009E000A38A00542409FFFF104900222404FFFFBA
+:1009F00052000020000020218E2600003C0C001038
+:100A000000CC5824156000393C0E000800CE682444
+:100A100055A0003F024020213C18000200D880244D
+:100A20001200001F3C0A00048F8700308CE2001483
+:100A30008CE300108CE500140043F82303E5C82B79
+:100A400013200005024020218E24002C8CF1001080
+:100A5000109100310240202124020012A382005490
+:100A60000E0018972412FFFF105200022404FFFF0B
+:100A7000000020218FBF001C8FB200188FB100141E
+:100A80008FB000100080102103E0000827BD002077
+:100A900090A800C4350400200A0018CDA0A400C40A
+:100AA00000CA48241520000B8F8B00308F8D00303A
+:100AB0008DAC00101580000B024020218E2E002CE2
+:100AC00051C0FFEC00002021024020210A0018E85C
+:100AD000240200178D66001050C0FFE600002021A0
+:100AE000024020210A0018E82402001102402021BF
+:100AF000240200150E001897A3820054240FFFFF54
+:100B0000104FFFDC2404FFFF0A0018D78E260000D8
+:100B10000A00190E240200143C08000400C83824FE
+:100B200050E0FFD400002021024020210A0018E8F4
+:100B3000240200138F86002827BDFFE0AFB1001408
+:100B4000AFBF0018AFB0001090C300C430A500FFC5
+:100B50003062002010400008008088218CCB00C04B
+:100B60002409FFDF256A0001ACCA00C090C800C498
+:100B700001093824A0C700C414A000403C0C800028
+:100B80008F840028908700C42418FFBF2406FFEF3D
+:100B900030E3007FA08300C4979F00488F82004C01
+:100BA0008F8D002803E2C823A7990048A5A000ACB8
+:100BB00091AF00C401F87024A1AE00C48F8C00284E
+:100BC000A18000C78F8A0028A5400072AD4000DCDC
+:100BD000914500C400A65824A14B00C48F90002466
+:100BE0008F84004C978600480204282110C0000F13
+:100BF000AF850024A38000443C0780008E2C0008B1
+:100C000094ED01208E2B0004018D5021014B802199
+:100C1000020620233086FFFF30C8000F390900018B
+:100C20003131000116200009A38800449386003466
+:100C30008FBF00188FB100148FB0001027BD0020A7
+:100C4000AF85005003E00008AF86004C00C8702359
+:100C50008FBF0018938600348FB100148FB000103E
+:100C600034EF0C00010F282127BD0020ACEE0084DA
+:100C7000AF85005003E00008AF86004C359001803E
+:100C8000020028210E001872240600828F8400289A
+:100C9000908600C430C5004050A0FFBAA380005425
+:100CA0008F8500383C0680008CCD01B805A0FFFE82
+:100CB0008F8900582408608224070002AE090000D2
+:100CC000A6080008A207000B8CA300083C0E100029
+:100CD000AE0300108CA2000CAE0200148CBF0014F6
+:100CE000AE1F00188CB90018AE1900248CB800246F
+:100CF000AE1800288CAF0028AE0F002CACCE01B887
+:100D00000A001932A38000548F8A002827BDFFE013
+:100D1000AFB10014AFB000108F88004CAFBF001807
+:100D20009389002C954200AC30D100FF0109182BAB
+:100D30000080802130AC00FF3047FFFF00005821C9
+:100D400014600003310600FF0120302101095823FF
+:100D5000978300480068202B1480001B00000000CF
+:100D600010680043240A0001118A004834E7088013
+:100D70003165FFFF0E001814020020210E001854E8
+:100D80008F8400588F840028948D007025AC00015A
+:100D9000A48C0070948B00703C0608008CC63188CF
+:100DA00031677FFF10E6004F0000000002002021A5
+:100DB000022028218FBF00188FB100148FB00010BF
+:100DC0000A00191E27BD0020914400C42406FF809C
+:100DD00000868825A15100C4978400483088FFFF11
+:100DE0001100001C9389002C8F8E00282419EFFF1E
+:100DF000008BF82395D800AC0168682B33E900FF1D
+:100E000003197824A5CF00AC51A0002A0100582175
+:100E10008E0500202408FFFB2403000100A81024F5
+:100E2000AE0200201183002534E78000020020215B
+:100E30003165FFFF0E00181401203021978B004808
+:100E40008F87004CA780004800EB8023AF90004CB8
+:100E50009389002C8F8C00288FBF00188FB100144D
+:100E60008FB0001027BD002003E00008A18900C753
+:100E70008E0800202409FFFB34E7800001092824A4
+:100E8000AE050020158AFFBA34E708800200202151
+:100E90000E0017E23165FFFF020020210220282109
+:100EA0008FBF00188FB100148FB000100A00191EF8
+:100EB00027BD00200A0019D500004821020020218A
+:100EC0003165FFFF0E0017E201203021978B0048AB
+:100ED0008F87004CA780004800EB80230A0019E5AB
+:100EE000AF90004C94890070240A8000012A4024AD
+:100EF000A4880070908500709099007030A200FF67
+:100F0000000219C20003F827001FC1C0332F007F61
+:100F100001F87025A08E00700A0019BD0200202182
+:100F20008F88002824030001910A0078910500C7EA
+:100F3000250900783147003F24E6FFE000C318048C
+:100F40002CC2002030670019A385002C1040001A25
+:100F5000AF8900383C0A8000354B000224050001AF
+:100F60002406000114E00016006B10240000282164
+:100F70001440000F306300201060000F24050001B2
+:100F80008D0600748D1900742403FF8000C31024A3
+:100F9000000279403338007F01F868253C0E1000CC
+:100FA00001AE6025AD4C08309128000131060001EA
+:100FB0000A0019930000000003E000080000000090
+:100FC0008D0F00748D0D00742418FF8001F87024BB
+:100FD000000E414031AC007F010C50253C0B10004D
+:100FE000014B38253C0980000A001993AD270830D1
+:100FF00027BDFFD8AFB000108F900038AFB40020ED
+:10100000AFB10014AFBF0024AFB3001CAFB20018E3
+:101010008E0500103C0208008C4231B08F86003CE7
+:1010200030A73FFF00E2182B8CD2001400808821EB
+:101030008CD30020106000070000A02190CB000D91
+:10104000240AFF80014B4824312800FF1500000CC2
+:1010500000056382022020212411000DA391005479
+:101060008FBF00248FB400208FB3001C8FB20018F4
+:101070008FB100148FB000100A00189727BD002808
+:101080003185000354A0FFF40220202194CF001CDE
+:101090008F8E00288E070028A5CF00D88CCD001099
+:1010A000024D302310E6005C2402001F0E0018974A
+:1010B000A3820054241FFFFF105F004E2404FFFF93
+:1010C0008F8300408F880030026398218D090010C3
+:1010D000012310238F830020AD020010AD130020E8
+:1010E0008C67007400F3202B148000620220202102
+:1010F0008F86003C8E0C00248CC5002411850007CF
+:1011000002202021240E001C0E001897A38E0054EC
+:10111000240DFFFF104D00372404FFFF8F840030A3
+:101120008C980024270F0001AC8F00241272004419
+:101130008F9900208F320074125300413C0A0080C6
+:101140008E090000012A10241440003A000000001B
+:101150008E0400142412FFFF10920006240B001BC3
+:10116000022020210E001897A38B0054105200215A
+:101170002404FFFF8E0300003C0C0001006C2824B7
+:1011800010A000133C0600800066A0241680000911
+:101190000200282102202021240E001A0E00189798
+:1011A000A38E0054240DFFFF104D00122404FFFFF6
+:1011B00002002821022020210E0018B72406000179
+:1011C0002410FFFF2404FFFF1050000A2414000124
+:1011D0008F8F0030022020210280302195F20034D0
+:1011E00024050001265800010E001993A5F80034CB
+:1011F000000020218FBF00248FB400208FB3001C7B
+:101200008FB200188FB100148FB000100080102131
+:1012100003E0000827BD00288F83004000E3C821B9
+:101220000259C02B1300FFA88F8800300A001A7CD7
+:1012300024020018AC8000200A001AA68E040014B4
+:101240008E1F00003C07008003E798241660FFF91A
+:101250002408001A022020210E001897A3880054A9
+:101260002403FFFF1443FFBA2404FFFF0A001ACF30
+:101270008FBF0024240B001D0E001897A38B005471
+:10128000240AFFFF144AFF9A2404FFFF0A001ACF22
+:101290008FBF00248F85002827BDFFD8AFB3001C67
+:1012A000AFB20018AFB10014AFB00010AFBF002054
+:1012B00090A700C48F9000382412FFFF34E2004052
+:1012C00092060000A0A200C48E03001000809821A6
+:1012D0001072000630D1003F2408000D0E00189750
+:1012E000A3880054105200262406FFFF8F8A00288E
+:1012F0008E0900188D4400C011240007240C000E34
+:10130000026020210E001897A38C0054240BFFFFCD
+:10131000104B001B2406FFFF2404002012240004AD
+:101320008F8D002891AF00C435EE0020A1AE00C41F
+:101330008F85004010A0001A000000001224004B0E
+:101340008F9800288F92FEEC2406FFFD9710007006
+:101350009651000A1230000B8FBF00203C1F08007E
+:101360008FFF318C03E5C82B1720001E026020215F
+:10137000000028210E0019932406000100003021EE
+:101380008FBF00208FB3001C8FB200188FB10014E4
+:101390008FB0001000C0102103E0000827BD002816
+:1013A0005224002A8E0300148F8400289489007030
+:1013B00025280001A4880070948700703C0508006F
+:1013C0008CA5318830E27FFF1045000E0000000040
+:1013D000026020210E00191E240500010A001B31A5
+:1013E000000030212402002DA38200540E00189723
+:1013F0002413FFFF1453FFE12406FFFF0A001B32F2
+:101400008FBF0020949800702419800024050001EB
+:1014100003199024A492007090910070908D007038
+:10142000323000FF001079C2000F7027000E61C03B
+:1014300031AB007F016C5025A08A00700E00191E90
+:10144000026020210A001B31000030212406FFFF2A
+:101450001466FFD68F840028026020210E00191E1A
+:10146000240500010A001B31000030210260202108
+:101470000A001B4B2402000A8F88002827BDFFE8C2
+:10148000AFB00010AFBF0014910A00C48F870038BE
+:1014900000808021354900408CE60010A10900C47D
+:1014A0003C0208008C4231B030C53FFF00A2182B2F
+:1014B000106000078F85003C240DFF8090AE000D6A
+:1014C00001AE6024318B00FF156000080006C38266
+:1014D000020020212403000D8FBF00148FB00010E4
+:1014E00027BD00180A001897A38300543306000391
+:1014F000240F000254CFFFF70200202194A2001C09
+:101500008F85002824190023A4A200D88CE80000AD
+:1015100000081E02307F003F13F900353C0A0083AB
+:101520008CE800188CA600C011060008000000001E
+:101530002405000E0E001897A38500542407FFFF12
+:10154000104700182404FFFF8F85002890A900C4CD
+:1015500035240020A0A400C48F8C0030918E000D93
+:1015600031CD007FA18D000D8F8300401060001CE5
+:10157000020020218F84003C8C9800100303782BFC
+:1015800011E0000D2419001802002021A399005435
+:101590000E0018972410FFFF105000022404FFFFD4
+:1015A000000020218FBF00148FB000100080102198
+:1015B00003E0000827BD00188C8600108F9F0030C4
+:1015C0000200202100C31023AFE200102405000117
+:1015D0000E001993240600010A001BBA0000202106
+:1015E0000E00191E240500010A001BBA000020216C
+:1015F000010A5824156AFFD98F8C0030A0A600EC90
+:101600000A001BA7A386004627BDFFD8AFB0001075
+:101610008F900038AFB20018AFBF0020AFB3001CEE
+:10162000AFB100148E1100103C0308008C6331B080
+:1016300032253FFF00A3102B1040000800809021AE
+:101640008F86003C2409FF8090CA000D012A4024A7
+:10165000310700FF14E0000B00116B8202402021D3
+:101660002412000DA39200548FBF00208FB3001CE2
+:101670008FB200188FB100148FB000100A001897B5
+:1016800027BD002831AC0003240B0001558BFFF46B
+:101690000240202190CF000D31EE000811C0006003
+:1016A0008F93004016600009240200278E19000C59
+:1016B0008CD8002017380005240200208E02000874
+:1016C0008CDF0024105F0040240200200E001897D9
+:1016D000A38200542406FFFF104600332404FFFFBA
+:1016E0008F990030240AFFF73C13800E9329000DD8
+:1016F0002404FF803C0D8000012AF824A33F000D44
+:101700008F9900203C0808008D0831AC8F83005869
+:10171000972700788F9F00300103102130E57FFF6D
+:10172000000530400046782131F8007F0313602126
+:1017300001E47024ADAE002CA59100008FEB0028D1
+:10174000256A0001AFEA00288FE3002C8E09002CE7
+:1017500000694021AFE8002C8E07002CAFE7003075
+:101760008E050014AFE5003497E6003A24C200016C
+:10177000A7E2003A973300783C1008008E1031B091
+:101780002663000130717FFF123000270060302196
+:101790008F8F002002402021240500010E00191E19
+:1017A000A5E60078000020218FBF00208FB3001C29
+:1017B0008FB200188FB100148FB00010008010217C
+:1017C00003E0000827BD00288E0500142413FFFF46
+:1017D00010B3001D8F8300288E0800188C6700C08E
+:1017E000150700092402000E8E0A00248CC9002867
+:1017F00015490005240200218E0700288CCB002CFF
+:1018000010EB00132402001F0E001897A38200544F
+:101810001453FFB32404FFFF0A001C3C8FBF0020B9
+:101820000A001C0424020024240E8000006E682498
+:1018300031ACFFFF000C5BC2317100FF001180274B
+:101840000A001C35001033C00A001C532402002576
+:101850008E05002C10A0FFEC240200238F8E0020A8
+:101860008DCD007401A5602B1580FFE724020026B2
+:101870008CCF001400A7C02101F8202B1080FF9905
+:101880008F990030024020210A001C5324020022BC
+:1018900027BDFFE0AFB000108F900038AFB100144B
+:1018A000AFBF00188E0500103C0308008C6331B0F8
+:1018B0000080882130A43FFF0083102B10400007D8
+:1018C0008F86003C2409FF8090CA000D012A402425
+:1018D000310700FF14E000098F8B00402410000D39
+:1018E00002202021A39000548FBF00188FB1001454
+:1018F0008FB000100A00189727BD00201160000863
+:101900000005C3828F8F00288F8EFEEC2407FFFD19
+:1019100095EC007095CD000A11AC00388FBF00180F
+:101920003305000314A0001000000000921900020B
+:1019300013200041000000008E06002450C0000F5C
+:1019400092040003022020212402000F0E001897A9
+:10195000A38200542408FFFF144800072407FFFF58
+:101960000A001CD08FBF001890C3000D306400081F
+:101970001080003702202021920400032407000277
+:10198000308900FF15270005308F00FF8F8A004047
+:1019900011400031240C002C308F00FF39E500107D
+:1019A0002CAD00012DEE00010200282101CD3025D3
+:1019B0000E0018B7022020212410FFFF1050000E47
+:1019C0002407FFFF8F8300401060001702202021B2
+:1019D0003C1908008F39318C0323C02B5700000CB1
+:1019E0002411002D02202021000028210E0019932F
+:1019F00024060001000038218FBF00188FB10014A9
+:101A00008FB0001000E0102103E0000827BD002087
+:101A10000E001897A39100541450FFF62407FFFFFF
+:101A20000A001CD08FBF00180E00191E24050001EB
+:101A30000A001CCF000038218CDF00248E02002415
+:101A4000545FFFC1022020210A001CB09204000351
+:101A50000A001CA424020010022020210E00189766
+:101A6000A38C0054240BFFFF104BFFE32407FFFF60
+:101A70000A001CB79204000330A500FF24060001F1
+:101A800024A9000100C9102B1040000C00004021C7
+:101A9000240A000100A61823308B000124C600018F
+:101AA000006A3804000420421160000200C9182BAB
+:101AB000010740251460FFF800A6182303E0000882
+:101AC0000100102127BDFFD8AFB000188F9000385B
+:101AD000AFB1001CAFBF00202403FFFF2411002F73
+:101AE000AFA3001092060000240500082610000194
+:101AF000006620260E001CEF308400FF00021E004E
+:101B00003C021EDC34466F410A001D170000102104
+:101B100010A00009008018212445000130A2FFFF19
+:101B20002C4500080461FFFA0003204000862026AF
+:101B300014A0FFF9008018210E001CEF24050020DE
+:101B40008FA300102629FFFF313100FF000342025E
+:101B5000240700FF1627FFE2010218260003502782
+:101B6000AFAA0014AFAA00100000302127A800106F
+:101B700027A7001400E6782391ED000324CE00018E
+:101B800000C8602131C600FF2CCB00041560FFF9AE
+:101B9000A18D00008FA200108FBF00208FB1001C0C
+:101BA0008FB0001803E0000827BD0028938300349D
+:101BB00027BDFFE024020034AFB10014AFB0001025
+:101BC000AFBF001CAFB20018008088211062006215
+:101BD00000A0802192040004148000458F88002812
+:101BE000A380002C8E0500048D0600C83C0700FF72
+:101BF00034E3FFFF00A3282400C5102B1440004D40
+:101C0000AF850040978A00488F87004C014710231A
+:101C100010A00032A78200488F980020304CFFFFB0
+:101C20009312007C0012788231F100010011708063
+:101C300001C56821018D582B116000618F86002835
+:101C40008F8900248F8400501089005E3C023F0180
+:101C50008E1F00003C10250003E2C8241730007AD4
+:101C60008F8400388F8700388F8600288CE300002F
+:101C7000ACC300788CE50010ACC500888F87004CA1
+:101C80008F850040938D002C30AE0003000E402362
+:101C9000310A0003014D4021A388002C94CB00ACF5
+:101CA00001276021AF8C002435691000A4C900AC65
+:101CB0001620005101452021AF84004C0000202156
+:101CC0008FBF001C8FB200188FB100148FB00010AE
+:101CD0000080102103E0000827BD00208F8400242D
+:101CE000AF80004C008730210A001D80AF860024A1
+:101CF000241F000CA39F00540E00189702202021DF
+:101D00002419FFFF1059FFEE2404FFFF8F880028DD
+:101D1000A380002C8E0500048D0600C83C0700FF40
+:101D200034E3FFFF00A3282400C5102B1040FFB5AB
+:101D3000AF8500400220202124090019A389005406
+:101D40000E0018972411FFFF1051FFDD2404FFFF40
+:101D50000A001D528F8500408F8400288F8700382D
+:101D60008CF20030908600C430C5001014A0001022
+:101D70008F83004C2C68000515000028000000002F
+:101D8000908A00C4246BFFFC314900101520000824
+:101D9000316400FF8F8D00508F8C002411AC000443
+:101DA000388F000131EE000115C0002F0000000047
+:101DB0000E001D02000000000A001DD900000000F6
+:101DC0008F890024938D002C30AE0003000E402339
+:101DD000310A0003014D4021A388002C94CB00ACB4
+:101DE00001276021AF8C002435691000A4C900AC24
+:101DF0001220FFB10145202125180004A398002CD2
+:101E000094CF00AC24920004AF92004C35F1200036
+:101E1000A4D100AC0A001D81000020218C8200DCCE
+:101E20001242FF6C0220202124180005A3980054C0
+:101E30000E0018972412FFFF1452FF662404FFFFC0
+:101E40000A001D828FBF001C30E500FF0E00179EA8
+:101E5000000030218F8600288F87004C8F89002456
+:101E60000A001D728F8500400E0017C90000000097
+:101E70000A001DD9000000009383004627BDFFE043
+:101E800024020002AFB20018AFB10014AFBF001CB3
+:101E900000808821AFB00010000090211062005532
+:101EA0002404FFFD978300488F85004C3066FFFFB8
+:101EB00000C5202B1480005B938700343C08800011
+:101EC0009504012010E500528F8A00248F84005071
+:101ED00030A500FF0E00179E240600018F9F0058BA
+:101EE0003C0580003C19408027ED017831B0007836
+:101EF000240EFF800219582534AF090031B80007BD
+:101F000001AE6024ACAC0800030F8021ACAB08101C
+:101F100002202021020028210E001D3CAF90003835
+:101F20002403FFFF104300332404FFFF8E0C001036
+:101F30003C0708008CE731B09206000031843FFF77
+:101F40000087102B1040002330CD003F8F980058A1
+:101F5000000471803C0408008C8431A82409FF80AF
+:101F60009390004500984021010E202100897024A3
+:101F7000000E51403C0980003099007F3C0F0080EA
+:101F80008F8800283525094035E2000101593825A0
+:101F9000308B0078308600073C0310003C1F800C1B
+:101FA00000C5C0210162582500E35025033F782178
+:101FB00036050001AD2E0804AF98003CAD2B081487
+:101FC000AF8F0030AD2E0028AD040074AD2A08306C
+:101FD000A38500459383004624100003507000271A
+:101FE00025A3FFE0240C0001106C001C2406002334
+:101FF000024020218FBF001C8FB200188FB1001447
+:102000008FB000100080102103E0000827BD0020E1
+:10201000314900035520FFAE8F8400500A001E1581
+:102020008F9000508F840050306500FF0E00179E87
+:1020300024060001938B0034240500341165001838
+:10204000978300488F85004C3062FFFF00A2582321
+:10205000AF8B004C0A001E4DA780004811A6003728
+:1020600000000000022020212411000B0E00189710
+:10207000A39100540A001E4D004090212C720020B4
+:102080001240FFF80003F8803C07080124E7813C78
+:1020900003E7C8218F2D000001A000080000000008
+:1020A0008F85004C2CA200055440001DA7800048DD
+:1020B000978A00483148FFFF00A848232D2F0005CC
+:1020C00011E00003314400FF24AEFFFC31C400FFE7
+:1020D0008F9000508F980024121800043899000146
+:1020E000332D000115A00029000000008F91002869
+:1020F000922500C434A30010A22300C49783004893
+:102100008F85004C8F8400283062FFFF00A2582387
+:10211000AC8000DCA78000480A001E4DAF8B004C4D
+:102120003062FFFF00A258230A001E4DAF8B004C07
+:102130002403FFFF11830005000000000E001B6F49
+:10214000022020210A001E4D004090210E001AF6A8
+:10215000022020210A001E4D004090210E001BD3BA
+:10216000022020210A001E4D004090210E001A4D31
+:10217000022020210A001E4D004090210E001C75F7
+:10218000022020210A001E4D004090210E0017C998
+:1021900000000000978300488F85004C306CFFFFE3
+:1021A00000AC38232CFF000553E0FFA83062FFFF8E
+:1021B0008F860028A7800048ACC200DC3062FFFF99
+:1021C00000A258230A001E4DAF8B004C27BDFFD044
+:1021D000AFB20018AFB00010AFBF0028AFB50024F9
+:1021E000AFB40020AFB3001CAFB100143C0C8000B2
+:1021F0008D880128240FFF803C07800A25100100EC
+:10220000250B0080020F68243205007F016F7024C7
+:10221000AD8E009000A72821AD8D002490A700EC82
+:102220003169007F3C0A8004012A1821A3870046F7
+:102230009066007C00809021AF83002030C20002B5
+:10224000AF880058AF85002800A018211440000274
+:102250002404003424040030A38400348C6600CCB1
+:1022600030F100FF24040004AF86004C1224000467
+:10227000A38000548E5300041660001D3C088000AB
+:102280009387004530F200011240000F8FBF0028F5
+:102290008CB800748CA400742419FF80031988245E
+:1022A00000117140308F007F01CF60253C0D200070
+:1022B000018D582530F500FE3C0A8000AD4B0830FA
+:1022C000A39500458FBF00288FB500248FB4002050
+:1022D0008FB3001C8FB200188FB100148FB00010A4
+:1022E0002402000127BD003003E00008ACA600CCAA
+:1022F0008E590008951F01208E460010033FC02113
+:102300003307FFFF30F5000F32B40001AF86002421
+:102310001680003BA395004435060C0002A6102150
+:1023200000F51823AD030084AF8200508E490004ED
+:102330003128FFFF1100002BA78900482410FF80DF
+:102340003C1580003C1420000A001F3B2413FFFEB4
+:1023500090AE00C4020E682431AC00FF1580002A44
+:10236000024020219384004597860048308F000169
+:1023700011E0000B026428248F8900288D2300744B
+:102380008D280074A3850045007010240002C94008
+:10239000311F007F033FC02503148825AEB10830EC
+:1023A00010C000108F85002890A700C40207582491
+:1023B000316A00FF1540FFE6024020210E001DEFAC
+:1023C000979100481040FFE8938400452405FFFDE5
+:1023D000544500058E430020022028210E0017746A
+:1023E000024020218E430020307000041600000AB5
+:1023F0002414FFFB8F8500280A001EF18F86004CF5
+:102400000A001F1CAF8600500E001A1900000000C1
+:102410000A001F2B93840045007498240E00178E29
+:10242000AE5300208F8500280A001EF18F86004CD5
+:1024300027BDFFD8AFB3001CAFB10014AFBF002061
+:10244000AFB20018AFB000103C0280008C520140C7
+:102450008C4B01483C048000000B8C02322300FFAF
+:10246000317300FF8C8501B804A0FFFE3490018019
+:10247000AE1200008C8701442464FFF024060002A1
+:102480002C830013AE070004A6110008A206000B5F
+:10249000AE1300241060004F8FBF0020000448805E
+:1024A0003C0A0801254A81BC012A40218D04000014
+:1024B00000800008000000003C1008008E1031A8C9
+:1024C00031733FFF001389800212C8212405FF8069
+:1024D00003312021264C0100264700803C1F80004C
+:1024E00000E51824318F007F30E9007F308A007FBB
+:1024F0003C18800A3C0E80043C0D800C00851024A2
+:1025000001853024014D8021AFE6002401F84021EF
+:10251000AFE30090012E9821AFE20028AF90003089
+:10252000AF880028AF9300200E001863016080215F
+:102530003C0380008C6B01B80560FFFE8F87003084
+:10254000346501808F86002890E3000DACB2000056
+:10255000A4B00006000316000002FE03001F90272F
+:10256000001227C21080007A24C2007824196082E9
+:10257000A4B90008A0A00005241F0002A0BF000B02
+:1025800000041C008F8B00203C0227000062902575
+:10259000ACB20010ACA00014ACA00024ACA0002889
+:1025A000ACA0002C8D7300382410FF80ACB3001851
+:1025B00090E4000D02048824322500FF10A00005DD
+:1025C0008FBF002090EC000D3188007FA0E8000D47
+:1025D0008FBF00208FB3001C8FB200188FB1001482
+:1025E0008FB000103C0D10003C0A800027BD002871
+:1025F00003E00008AD4D01B8265F01002405FF800F
+:1026000033F8007F3C06800003E578243C19800AFB
+:1026100003192021ACCF0024908E00C400AE6824A2
+:1026200031AC00FF1180FFEAAF840028248E0078CF
+:1026300095CD00123C0C08008D8C31A831AB3FFFCA
+:1026400001924821000B5180012A402101052024DC
+:10265000ACC400283107007F3C06800C00E6202136
+:102660009083000D00A31024304500FF10A0FFD878
+:10267000AF8400309098000D330F001015E0FFD5A7
+:102680008FBF00200E001863000000003C03800094
+:102690008C7901B80720FFFE00000000AE12000098
+:1026A0008C720144AE120004A6110008241100022D
+:1026B000A211000BAE1300240A001FC68FBF00201A
+:1026C0003C1260008E452C083C03F0033462FFFF8F
+:1026D00000A2F824AE5F2C088E582C083C1901B0DB
+:1026E00003199825AE532C080A001FC68FBF00207F
+:1026F000264D010031AF007F3C10800A240EFF8080
+:1027000001F0282101AE60243C0B8000AD6C002458
+:102710001660FFAFAF85002824110003A0B100ECC4
+:102720000A001FC68FBF002026480100310A007F23
+:102730003C0B800A2409FF80014B30210109202431
+:102740003C078000ACE400240A001FC5AF860028C7
+:10275000944A001232083FFF314C3FFF1588FF8436
+:102760002419608290CF00C4240EFF8001CF48243A
+:10277000312D00FF11A0FF7E00000000240700049F
+:10278000A0C700EC8F870030241860842406000D59
+:10279000A4B80008A0A600050A001FB0241F00026C
+:1027A0000800330C0800330C080033E8080033BC81
+:1027B000080033A0080032F0080032F0080032F0C0
+:1027C00008003314800801008008008080080000A1
+:1027D0005F865437E4AC62CC50103A4536621985B6
+:1027E000BF14C0E81BC27A1E84F4B556094EA6FE7B
+:1027F0007DDA01E7C04D748108007A7408007AC060
+:1028000008007A80080079A808007A8008007AB069
+:1028100008007A80080079A8080079A8080079A83B
+:10282000080079A8080079A8080079A8080079A804
+:10283000080079A8080079A8080079A808007AA0FB
+:1028400008007A90080079A8080079A8080079A8FB
+:10285000080079A8080079A8080079A8080079A8D4
+:10286000080079A8080079A8080079A8080079A8C4
+:10287000080079A808007A900800806C08007F148E
+:102880000800803408007F140800800408007DFCE4
+:1028900008007F1408007F1408007F1408007F14CC
+:1028A00008007F1408007F1408007F1408007F14BC
+:1028B00008007F1408007F1408007F1408007F14AC
+:0428C00008007F3C51
+:0C28C4000A0001220000000000000000DB
+:1028D0000000000D747061352E302E306A33000018
+:1028E00005000001000000000000000000000000E2
+:1028F00000000000000000000000000000000000D8
+:1029000000000000000000000000000000000000C7
+:1029100000000000000000000000000000000000B7
+:1029200000000000000000000000000000000000A7
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000000000087
+:1029500010000003000000000000000D0000000D4A
+:102960003C02080024421C203C03080024631FA0F2
+:10297000AC4000000043202B1480FFFD24420004E3
+:102980003C1D080037BD2FFC03A0F0213C100800BF
+:10299000261004883C1C0800279C1C200E0002E224
+:1029A000000000000000000D2402FF8027BDFFE0B2
+:1029B00000821024AFB00010AF420020AFBF00185B
+:1029C000AFB10014936500043084007F03441821E4
+:1029D0003C0200080062182130A50020036080211D
+:1029E0003C080111277B000814A000022466005C4B
+:1029F00024660058920200049743010492040004E4
+:102A00003047000F3063FFFF308400400067282309
+:102A100010800009000048219202000530420004A5
+:102A2000104000050000000010A00003000000009E
+:102A300024A5FFFC24090004920200053042000492
+:102A4000104000120000000010A000100000000064
+:102A50009602000200A72021010440252442FFFE27
+:102A6000A7421016920300042402FF8000431024A2
+:102A7000304200FF104000033C0204000A000172D3
+:102A8000010240258CC20000AF4210188F4201782D
+:102A90000440FFFE2402000AA74201409602000201
+:102AA00024040009304200070002102330420007CE
+:102AB000A7420142960200022442FFFEA7420144BF
+:102AC000A740014697420104A74201488F420108EE
+:102AD0003042002050400001240400019202000412
+:102AE000304200101440000234830010008018218E
+:102AF000A743014A000000000000000000000000A1
+:102B000000000000AF4810000000000000000000BE
+:102B100000000000000000008F4210000441FFFE92
+:102B20003102FFFF10400007000000009202000485
+:102B30003042004014400003000000008F42101893
+:102B4000ACC20000960200063042FFFF24420002A1
+:102B50000002104300021040036288219622000008
+:102B60001120000D3044FFFF00A710218F83003893
+:102B70008F45101C000210820002108000431021BB
+:102B8000AC45000030A6FFFF0E0002D100052C026C
+:102B900000402021A6220000920300042402FF80AE
+:102BA00000431024304200FF1040001F00000000CE
+:102BB00092020005304200021040001B000000009D
+:102BC0009742100C2442FFFEA7421016000000009E
+:102BD0003C02040034420030AF421000000000000C
+:102BE0000000000000000000000000008F42100004
+:102BF0000441FFFE000000009742100C8F45101C9E
+:102C00003042FFFF24420030000210820002108098
+:102C1000005B1021AC45000030A6FFFF0E0002D182
+:102C200000052C02A622000096040002248400085D
+:102C30000E0001E73084FFFF974401040E0001F508
+:102C40003084FFFF8FBF00188FB100148FB00010C9
+:102C50003C02100027BD002003E00008AF420178CD
+:102C60003084FFFF308200078F850024104000026F
+:102C7000248300073064FFF800A4102130421FFFB6
+:102C800003421821247B4000AF850028AF82002436
+:102C900003E00008AF4200843084FFFF3082000F61
+:102CA0008F85002C8F860034104000022483000F93
+:102CB0003064FFF000A410210046182BAF850030CF
+:102CC0000046202314600002AF82002CAF84002C49
+:102CD0008F82002C340480000342182100641821E4
+:102CE000AF83003803E00008AF4200808F820014F9
+:102CF000104000088F8200048F82FFCC1440000532
+:102D00008F8200043C02FFBF3442FFFF0082202478
+:102D10008F82000430430006240200021062000F7C
+:102D20003C0201012C620003504000052402000413
+:102D30001060000F3C0200010A00022E000000009B
+:102D400010620005240200061462000C3C0201110E
+:102D50000A000227008210253C0200110082102583
+:102D6000AF421000240200010A00022EAF82000CC4
+:102D700000821025AF421000AF80000C0000000060
+:102D8000000000000000000003E000080000000058
+:102D90008F82000C10400004000000008F421000E1
+:102DA0000441FFFE0000000003E0000800000000F6
+:102DB0008F8200102443F800000229C224A2FFF0F1
+:102DC0002C63030110600003000210420A00025548
+:102DD000AC8200008F83001800A3102B1440000B5E
+:102DE0000000382100A31023244600018F82001C1C
+:102DF000006210212442FFFF0045102B54400004C4
+:102E00002402FFFF0A000255AC8600002402FFFFE7
+:102E10000A00025AAC8200008C8200003C030800C9
+:102E200024631C5C000211400043382103E00008C9
+:102E300000E010213C0908008D291D80000451404C
+:102E40003C19080027391C5C00C0782100806021F3
+:102E5000240EFFFF000038210159402111200036C7
+:102E6000000030213C18080027181D983C0D080070
+:102E700025AD1D9C000F582B000611800046102127
+:102E8000000218C0007810218C420000158200203A
+:102E9000006D20218CA20000544000098D02001812
+:102EA0003C0208008C421D8424420001AC820000D8
+:102EB0003C010800AC221D840A0002CF0000202142
+:102EC0008F47002000003021000211C01160004A2D
+:102ED000AF4200208D08001C3C0900088CA30000B4
+:102EE0000066182100031880007A10210049102183
+:102EF0008C44000024C600010068182100CF102B6C
+:102F00001440FFF6AC6400000A0002CD000000008F
+:102F10008C840000008E102B5040000424C6000159
+:102F20000080702100C0382124C6000100C9102B88
+:102F30001440FFD20006118024020001ACA2000060
+:102F40003C0208008C421D7C3C0308008C631D8001
+:102F50000043102B1440002A2404FFFE01591021C5
+:102F60008C420018104000262404FFFF0007218037
+:102F70003C0508008CA51D84008720218D060018C3
+:102F8000000420C03C02080024421D980082102149
+:102F90003C03080024631D9CAC4C000024A50001E8
+:102FA000008318213C02080024421DA0AC650000EB
+:102FB000000631C03C010800AC251D8400822021A0
+:102FC0008F470020AD04001CAF46002011E0000A2E
+:102FD000000030213C020008034228218CA200009E
+:102FE00024C6000100CF182BAC82000024A50004E9
+:102FF0001460FFFA24840004AF4700200000202161
+:1030000003E00008008010213084FFFF30C6FFFF7E
+:1030100000052C0000A628253882FFFF004510215E
+:103020000045282B0045102100021C023042FFFF02
+:103030000043102100021C023042FFFF0043102118
+:103040003842FFFF03E000083042FFFF27BDFFC802
+:10305000AFBF0030AFB3002CAFB20028AFB1002437
+:10306000AFB000203C0460088C8250002403FF7F36
+:103070003C066000004310243442380CAC825000FF
+:103080008CC24C1C3C1A8000000216023042000F19
+:1030900010400007AF82001C8CC34C1C3C02001F78
+:1030A0003442FC0000621824000319C2AF830018E8
+:1030B0008F420008275B400034420001AF42000805
+:1030C000AF8000243C02601CAF400080AF40008411
+:1030D0008C4500088CC3080834028000034220217C
+:1030E0002402FFF0006218243C0200803C0108002A
+:1030F000AC2204203C025709AF840038146200045B
+:10310000AF850034240200010A000314AF820014CA
+:10311000AF8000142403003D240200043C01080099
+:10312000AC221D943C010800AC231D903C0108001A
+:10313000AC231D8C3C010800AC231D883C13080007
+:1031400026731C5C240400043C02080024421C7406
+:10315000240300082463FFFFAC400004AC400000DF
+:103160000461FFFC24420020000410C00044102130
+:103170002442003D3C010800AC221D9024020001C5
+:103180003C010800AC221D7C2402FFFF3C0108002A
+:10319000AC221D983C010800AC201D848F42000029
+:1031A00038420001304200011440FFFC8F820014BD
+:1031B0001040001600000000974201041040000576
+:1031C0008F830000146000072462FFFF0A00034B96
+:1031D0002C62000A2C620010504000048F83000013
+:1031E00024620001AF8200008F8300002C62000A7D
+:1031F000144000032C6200070A000352AF80FFCC8A
+:103200001040000224020001AF82FFCC8F4301086E
+:103210008F44010030622000AF830004104000089A
+:10322000AF8400103C0208008C42042C24420001B0
+:103230003C010800AC22042C0A0006D73C024000E6
+:103240003065020014A0000324020F001482030959
+:1032500024020D0097420104104003713C0240001B
+:1032600030624000144000AD8F8200388C4400086A
+:103270008F4201780440FFFE24020800AF4201782B
+:1032800024020008A7420140A740014297420104DE
+:103290008F8400043051FFFF30820001104000078E
+:1032A000022080212623FFFE240200023070FFFF4F
+:1032B000A74201460A00037FA7430148A7400146F1
+:1032C0003C0208008C42043C1440000D8F83001027
+:1032D000308200201440000224030009240300016E
+:1032E000006020218F830010240209005062000139
+:1032F00034840004A744014A0A00039A0000000035
+:1033000024020F00146200053082002014400006E1
+:103310002403000D0A000399240300051440000251
+:103320002403000924030001A743014A3C020800CA
+:103330008C4204203C0400480E00020A0044202570
+:103340000E000233000000008F82000C1040003E8F
+:10335000000000008F4210003C03002000431024B6
+:10336000104000398F8200043042000210400036C5
+:1033700000000000974210141440003300000000C9
+:10338000974210088F8800383042FFFF2442000621
+:10339000000218820003388000E830213043000129
+:1033A0008CC4000010600004304200030000000DD7
+:1033B0000A0003DB00E81021544000103084FFFFB6
+:1033C0003C05FFFF00852024008518260003182BEC
+:1033D0000004102B004310241040000500000000E2
+:1033E000000000000000000D000000002400021C8E
+:1033F0008CC200000A0003DA004520253883FFFF55
+:103400000003182B0004102B00431024104000056B
+:1034100000000000000000000000000D000000009F
+:10342000240002258CC200003444FFFF00E8102174
+:10343000AC4400003C0208008C42043024420001ED
+:103440003C010800AC2204308F6200008F840038F9
+:10345000AF8200088C8300003402FFFF1462000F6B
+:10346000000010213C0508008CA504543C04080011
+:103470008C84045000B0282100B0302B0082202121
+:10348000008620213C010800AC2504543C010800C2
+:10349000AC2404500A0006CD240400088C820000ED
+:1034A000304201001040000F000010213C050800D0
+:1034B0008CA5044C3C0408008C84044800B02821EE
+:1034C00000B0302B00822021008620213C01080022
+:1034D000AC25044C3C010800AC2404480A0006CD8D
+:1034E000240400083C0508008CA504443C040800A2
+:1034F0008C84044000B0282100B0302B00822021B1
+:10350000008620213C010800AC2504443C01080051
+:10351000AC2404400A0006CD240400088F62000891
+:103520008F62000000021602304300F024020030D7
+:1035300010620005240200401062016B8F8200209F
+:103540000A0006D52442000114A000050000000076
+:10355000000000000000000D0000000024000250E8
+:103560008F4201780440FFFE000000000E00023B85
+:1035700027A4001014400005004080210000000036
+:103580000000000D00000000240002578E02000021
+:103590001040000500000000000000000000000DC9
+:1035A000000000002400025A8F62000C0443000354
+:1035B000240200010A00055DAE000000AE0200001A
+:1035C0008F8200388C450008A20000078F65000C30
+:1035D0008F64000430A3FFFF000424020085202331
+:1035E000308200FF0043102124420005000288833E
+:1035F0002E220081A605000A14400005A204000442
+:10360000000000000000000D000000002400027215
+:103610003C0708008CE71D808FA800102409FFFFDD
+:103620000000502110E00013000030213C0C080085
+:10363000258C1D9C01802821000018218CA2FFFCF4
+:103640005102002F006C18218CA400002463020892
+:103650000089102B1040000324A502080080482197
+:1036600000C0502124C6000100C7102B5440FFF4B5
+:103670008CA2FFFC3C0508008CA51D803C020800C4
+:103680008C421D7C3C09080025291C603C03080075
+:1036900024631D9800A2102B3C0C0800258C1D9C57
+:1036A0003C0408008C841D843C0B0800256B1DA085
+:1036B0001040001A0008314000051180004510211B
+:1036C000000210C000C9382124840001004B3021C1
+:1036D0000043182124A50001004C1021AC68000013
+:1036E000ACE600183C010800AC241D84AC4400008A
+:1036F0003C010800AC251D800A0004A88E04001CB3
+:103700003C0208008C421D84244200013C01080058
+:10371000AC221D840A0004A7AC620000000A1180DC
+:10372000004A1021000210C0004328218CA3000091
+:10373000004C3821248400010003194000C93021C5
+:1037400000691821004B1021ACA80000AC600018E3
+:103750003C010800AC241D84ACC20018ACE400009D
+:103760008E04001C8F8500380E0006E702203021F1
+:103770008F6200048F430108A60200083C0210007B
+:103780000062182410600008000000009742010445
+:10379000920300072442FFEC346300023045FFFF30
+:1037A0000A0004BCA2030007974201042442FFF070
+:1037B0003045FFFF960600082CC200135440000558
+:1037C000920300079202000734420001A2020007A0
+:1037D0009203000724020001106200052402000386
+:1037E0001062000B30C7FFFF0A0004DB24E2000276
+:1037F0008F8200383C04FFFF8C43000C00641824C7
+:1038000000651825AC43000C0A0004DA30C7FFFF3E
+:103810008F8200383C04FFFF8C43001000641824A2
+:1038200000651825AC43001030C7FFFF24E20002FA
+:1038300000021083A20200058F830038304200FF8F
+:1038400000021080004330218CC500008CC20000B3
+:1038500024030004000217021443001300000000B8
+:10386000974201043C03FFFF00A318243042FFFFEE
+:10387000004710232442FFFE00622825ACC500004B
+:10388000920400058E03001C308200FF00021080AD
+:1038900000431021904200003042000F00441021EC
+:1038A0000A000510A20200068CC40004974201041D
+:1038B0009603000A3085FFFF3042FFFF00471023C8
+:1038C0002442FFD60002140000A22825ACC5000443
+:1038D0009202000792040005246300280003188365
+:1038E0000064182134420004A2030006A20200076B
+:1038F0008F8200042403FFFB3442000200431024A3
+:10390000AF820004920300068E07001C8F860038E9
+:1039100000031880006710218C44000C3C02FFF665
+:103920003442FFFF0082282400661821AE04000CF8
+:10393000AC65000C920300068E04000C3C02FF7F75
+:103940003442FFFF0003188000A2282400822024B4
+:1039500000671821AE04000CAC65000C9202000652
+:10396000000210800047102194450012AC45001061
+:10397000920200060002108000461021AC450010A3
+:103980008FA200109203000500021140000318806E
+:1039900000671821005320218C6200048C830018DA
+:1039A0001460000EAE0200143C0308008C631D8CF2
+:1039B000AC8300183C0208008C421D900062102B62
+:1039C00010400019000000003C0208008C421D94C9
+:1039D000006210213C010800AC221D8C8E020018F0
+:1039E0008F48002000003021000211C01220000B7F
+:1039F000AF4200203C0200080342282100E02021C1
+:103A00008C82000024C6000100D1182BACA200005B
+:103A1000248400041460FFFA24A50004AF480020A9
+:103A20000A00055E24020010000000000000000DE6
+:103A300000000000240002D424020010A74201402C
+:103A400024020002A7400142A7400144A7420146C8
+:103A5000974201043C0400082442FFFEA7420148AB
+:103A6000240200010E00020AA742014A9603000A3E
+:103A70009202000400431021244200023042000759
+:103A800000021023304200070E000233AE02001085
+:103A90008F6200003C0308008C630444240400107F
+:103AA000AF820008974201043042FFFF2442FFFE2C
+:103AB00000403821000237C33C0208008C42044019
+:103AC000006718210067282B0046102100451021AF
+:103AD0003C010800AC2304443C010800AC22044033
+:103AE0000A0006620000000014A0000500000000AB
+:103AF000000000000000000D00000000240003048E
+:103B00008F4201780440FFFE000000000E00023BDF
+:103B100027A400141440000500408021000000008C
+:103B20000000000D000000002400030B92060004BA
+:103B30008FA4001427A50018000630820E00025C36
+:103B4000AFA00018504000068E02000000000000E8
+:103B50000000000D00000000240003118E02000090
+:103B60005440000692020007000000000000000D13
+:103B700000000000240003169202000730420004F7
+:103B8000104000058F8200042403FFFB3442000232
+:103B900000431024AF8200048F6200040443000934
+:103BA00092020007920200068E03001C8E04000C95
+:103BB0000002108000431021AC44000CAE00000055
+:103BC00092020007304200045440000B92030004AC
+:103BD000920300058E0400148E05001C000318805B
+:103BE0003C0200010082202100651821AE0400146F
+:103BF000AC640004920300049602000A00621021E3
+:103C000024420005000290838FA200181040000D8E
+:103C1000277100088FA40014000310820242302391
+:103C200027A500180E00025CAFA200185040000645
+:103C30008E05001C000000000000000D00000000C8
+:103C40002400033F8E05001C022020210E0006E701
+:103C500002403021920400068F6500043C027FFF81
+:103C600000042080009120218C8300043442FFFF57
+:103C700000A2282400651821AC83000492020007EA
+:103C80009203000492050005304200041040001425
+:103C90009607000830A500FF0005288000B1282104
+:103CA0008CA40004974201049606000A306300FFCA
+:103CB0003042FFFF004310210046102130E3FFFF98
+:103CC000004310232442FFD83084FFFF0002140079
+:103CD00000822025ACA400040A0006169203000707
+:103CE00030A500FF0005288000B128218CA4000029
+:103CF00097420104306300FF3042FFFF0043102170
+:103D0000004710233C03FFFF008320243042FFFFC5
+:103D100000822025ACA400009203000724020001C9
+:103D2000106200060000000024020003106200116F
+:103D3000000000000A0006398E03001097420104BB
+:103D4000920300049605000A8E24000C0043102103
+:103D5000004510212442FFF23C03FFFF0083202492
+:103D60003042FFFF00822025AE24000C0A000639F5
+:103D70008E03001097420104920300049605000A86
+:103D80008E24001000431021004510212442FFEE34
+:103D90003C03FFFF008320243042FFFF00822025E8
+:103DA000AE2400108E0300102402000AA742014036
+:103DB000A74301429603000A920200043C0400401B
+:103DC00000431021A7420144A74001469742010445
+:103DD000A7420148240200010E00020AA742014A3C
+:103DE0000E000233000000008F6200009203000406
+:103DF00000002021AF820008974201049606000AC5
+:103E00003042FFFF00621821006028213C030800B7
+:103E10008C6304443C0208008C4204400065182175
+:103E2000004410210065382B004710213C01080098
+:103E3000AC2304443C010800AC220440920400047A
+:103E4000008620212484000A3084FFFF0E0001E751
+:103E500000000000974401043084FFFF0E0001F5CC
+:103E6000000000003C021000AF4201780A0006D4B6
+:103E70008F820020148200273062000697420104DE
+:103E8000104000673C0240003062400010400005D6
+:103E900000000000000000000000000D0000000015
+:103EA0002400041A8F4201780440FFFE2402080017
+:103EB000AF42017824020008A7420140A740014216
+:103EC0008F82000497430104304200011040000734
+:103ED0003070FFFF2603FFFE24020002A7420146C6
+:103EE000A74301480A00068C2402000DA7400146A2
+:103EF0002402000DA742014A8F620000240400083A
+:103F0000AF8200080E0001E7000000000A0006660C
+:103F100002002021104000423C0240009362000059
+:103F2000304300F0240200101062000524020070EB
+:103F3000106200358F8200200A0006D5244200015D
+:103F40008F620000974301043050FFFF3071FFFF84
+:103F50008F4201780440FFFE320200070002102366
+:103F6000304200072403000A2604FFFEA743014055
+:103F7000A7420142A7440144A7400146A751014876
+:103F80008F4201083042002014400002240300093F
+:103F900024030001A743014A0E00020A3C0400402A
+:103FA0000E000233000000003C0708008CE70444C8
+:103FB000021110212442FFFE3C0608008CC604407A
+:103FC0000040182100E33821000010218F65000017
+:103FD00000E3402B00C230212604000800C8302135
+:103FE0003084FFFFAF8500083C010800AC27044483
+:103FF0003C010800AC2604400E0001E70000000070
+:104000000A000666022020210E000139000000008F
+:104010008F82002024420001AF8200203C02400039
+:10402000AF4201380A000336000000003084FFFF71
+:1040300030A5FFFF000018211080000700000000DD
+:104040003082000110400002000420420065182167
+:104050000A0006DD0005284003E00008006010218A
+:1040600010C0000624C6FFFF8CA2000024A5000497
+:10407000AC8200000A0006E72484000403E0000884
+:104080000000000010A0000824A3FFFFAC86000081
+:1040900000000000000000002402FFFF2463FFFF77
+:1040A0001462FFFA2484000403E00008000000000A
+:0440B000000000010B
+:0C40B4000A00002A0000000000000000CC
+:1040C0000000000D747870352E302E306A330000F9
+:1040D000050000000000000A000001360000EA6050
+:1040E00000000000000000000000000000000000D0
+:1040F00000000000000000000000000000000000C0
+:1041000000000000000000000000000000000000AF
+:104110000000000000000016000000000000000089
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:1041400000000000000000000000000000001388D4
+:1041500000000000000005DC00000000000000007E
+:1041600010000003000000000000000D0000000D22
+:104170003C020800244238603C03080024633B14DE
+:10418000AC4000000043202B1480FFFD24420004BB
+:104190003C1D080037BD7FFC03A0F0213C10080047
+:1041A000261000A83C1C0800279C38600E0004075D
+:1041B000000000000000000D8F86003C3C039000D2
+:1041C0003C0280000086282500A32025AC44002066
+:1041D0003C0380008C67002004E0FFFE000000002C
+:1041E00003E00008000000000A0000412404000170
+:1041F0008F85003C3C0480003483000100A310251F
+:1042000003E00008AC82002003E000080000102159
+:104210003084FFFF30A5FFFF108000070000182149
+:104220003082000110400002000420420065182185
+:104230001480FFFB0005284003E000080060102107
+:1042400010C00007000000008CA2000024C6FFFF81
+:1042500024A50004AC82000014C0FFFB24840004E9
+:1042600003E000080000000010A0000824A3FFFFE6
+:10427000AC86000000000000000000002402FFFFE8
+:104280002463FFFF1462FFFA2484000403E00008A3
+:104290000000000090AA00318FAB00108CAC0040F1
+:1042A0003C0300FF8D680004AD6C00208CAD004421
+:1042B00000E060213462FFFFAD6D00248CA7004850
+:1042C0003C09FF000109C024AD6700288CAE004CFA
+:1042D0000182C82403197825AD6F0004AD6E002C4F
+:1042E0008CAD0038314A00FFAD6D001C94A900323E
+:1042F0003128FFFFAD68001090A70030A5600002D4
+:10430000A1600004A167000090A30032306200FFAA
+:104310000002198210600005240500011065000EDE
+:104320000000000003E00008A16A00018CD800280A
+:10433000354A0080AD7800188CCF0014AD6F0014A2
+:104340008CCE0030AD6E00088CC4002CA16A000138
+:1043500003E00008AD64000C8CCD001CAD6D0018AE
+:104360008CC90014AD6900148CC80024AD68000825
+:104370008CC70020AD67000C8CC200148C830070C9
+:104380000043C82B13200007000000008CC200145B
+:10439000144CFFE400000000354A008003E00008F0
+:1043A000A16A00018C8200700A0000B700000000C2
+:1043B0009089003027BDFFF88FA8001CA3A900003A
+:1043C0008FA300003C0DFF8035A2FFFF8CAC002CBA
+:1043D00000625824AFAB0000A100000400C05821C7
+:1043E000A7A000028D06000400A048210167C82193
+:1043F0008FA50000008050213C18FF7F032C202651
+:104400003C0E00FF2C8C0001370FFFFF35CDFFFF66
+:104410003C02FF0000AFC82400EDC02400C2782495
+:10442000000C1DC00323682501F87025AD0D0000A8
+:10443000AD0E00048D240024AFAD0000AD040008D3
+:104440008D2C00202404FFFFAD0C000C954700329A
+:1044500030E6FFFFAD0600109145004830A200FF96
+:10446000000219C2506000018D240034AD04001414
+:104470008D4700388FAA001827BD0008AD0B002813
+:10448000AD0A0024AD07001CAD00002CAD000018E3
+:1044900003E00008AD00002027BDFFE0AFB2001828
+:1044A000AFB10014AFB00010AFBF001C9098003047
+:1044B00000C088213C0D00FF330F007FA0CF00001B
+:1044C000908E003135ACFFFF3C0AFF00A0CE00010A
+:1044D00094A6001EA22000048CAB00148E290004B8
+:1044E00000A08021016C2824012A40240080902112
+:1044F00001052025A6260002AE2400042605002082
+:10450000262400080E0000632406000292470030B3
+:10451000260500282624001400071E0000031603A9
+:1045200024060004044000032403FFFF96590032D0
+:104530003323FFFF0E000063AE2300102624002467
+:104540008FBF001C8FB200188FB100148FB0001005
+:1045500024050003000030210A00006D27BD002063
+:1045600027BDFFD8AFB1001CAFB00018AFBF00200F
+:1045700090A900302402000100E050213123003FC7
+:1045800000A040218FB000400080882100C0482159
+:10459000106200148FA70038240B000500A0202112
+:1045A00000C02821106B0013020030210E0000F91A
+:1045B000000000009225007C30A40002108000035F
+:1045C00026030030AE000030260300348FBF0020E9
+:1045D0008FB1001C8FB000180060102103E00008AC
+:1045E00027BD00280E000078AFB000100A0001407F
+:1045F000000000008FA3003C0100202101202821A1
+:1046000001403021AFA300100E0000BFAFB0001476
+:104610000A000140000000003C0580008CA30E1041
+:104620008F840044AC8300208CA20E1803E00008A5
+:10463000AC8200243C0580008CA30E148F840044BF
+:10464000AC8300208CA20E1C03E00008AC82002486
+:104650009382000C1040001B2483000F2404FFF001
+:104660000064382410E00019978B00109784000E26
+:104670009389000D3C0A601C0A00017B0164402301
+:1046800001037021006428231126000231C2FFFFBC
+:1046900030A2FFFF0047302B50C0000E00E448213D
+:1046A0008D4D000C31A3FFFF00036400000C2C03B0
+:1046B00004A1FFF30000302130637FFF0A00017383
+:1046C0002406000103E00008000000009784000EAB
+:1046D00000E448213123FFFF3168FFFF0068382BD9
+:1046E00054E0FFF8A783000E938A000D11400005E7
+:1046F000240F0001006BC023A380000D03E000081D
+:10470000A798000E006BC023A38F000D03E00008E4
+:10471000A798000E03E000080000000027BDFFE896
+:10472000AFB000103084FFFF3C10800093A8002B36
+:10473000AFBF0014A6040144960A0E1630C600FF4F
+:104740008FA90030A60A0146AE050148A206015213
+:10475000A608015AAE0701608FA3002CA6090158D4
+:10476000012020210E000167AE0301543C0210001D
+:10477000AE0201788FBF00148FB0001003E0000874
+:1047800027BD00188F8500002484000727BDFFF88F
+:104790003084FFF83C06800094CB008A316AFFFF2A
+:1047A000AFAA00008FA90000012540232507FFFFC5
+:1047B00030E31FFF0064102B1440FFF700056882F0
+:1047C000000D288034CC400000AC102103E000082C
+:1047D00027BD00088F8200002486000730C5FFF83F
+:1047E00000A2182130641FFF03E00008AF8400001E
+:1047F0008F8500448F8A003C27BDFFB03C048000B9
+:10480000AFB70044AFB40038AFB1002CAFBF004821
+:10481000AFB60040AFB5003CAFB30034AFB200302C
+:10482000AFB000288C8701048CA90024AC8A0080DA
+:104830008CA8002000E988230000B821AC880E1065
+:104840008CA600240000A021AC860E188C820E10CD
+:10485000AC820E148C830E18AC830E1C122000FB4D
+:104860003C168000936B0008116000F1000000000E
+:10487000976E001031CDFFFF022D602B158000ECEC
+:104880000000000097700010320FFFFFAECF0E0047
+:104890003C0580008CB30000327200081240FFFD1E
+:1048A0000000000094B50E088CA70E0432A5FFFF8F
+:1048B00030B40001128000E1000000000000000D93
+:1048C00030B9A040241800401338011730B4A000BC
+:1048D000128000DC000000009373000812600008E2
+:1048E00000000000976900103122FFFF00E2202B3A
+:1048F0001080000330A6004010C000D2000000006D
+:10490000A7850040AF870038936A0008022038214D
+:10491000AFB10020154000F127B40020AF60000CBB
+:104920009785004030B14000162000022403001695
+:104930002403000E24154007A363000AAF7500147A
+:10494000939000428F6F0014321900010019C24089
+:1049500001F84025AF680014978700408F6300146A
+:1049600030EE0010006E6825AF6D0014978C00408B
+:10497000318B000811600165000000008F65001494
+:104980003C0B10003C0A800000AB8825AF7100147E
+:1049900095460E0A3C0981002413000E30C2FFFF29
+:1049A00000492025AF640004A3730002937F000A2E
+:1049B0003406FFFC27F20004A372000A978D004022
+:1049C00031AC200011800157000000003C0780003E
+:1049D000978D004094EC0E0C97910040000D5842CA
+:1049E0003185C000316A000300051303322910002D
+:1049F00001429825000922030264F825001F90C097
+:104A0000A7720012979500409379000A00158182E1
+:104A10003218003C0319782125E8003CA3680009FE
+:104A200094EE0E0C31C33FFFA76300109763001292
+:104A30009367000900E3702125CD000231AC000727
+:104A4000000C582331650007A365000B9371000922
+:104A500097640012976A0010322200FF8F9100388D
+:104A6000979F004000444821012A98210266902126
+:104A700033F5004012A000053246FFFF00D1402B65
+:104A80003C12800011000016000098210226782BAD
+:104A900015E001368FA700203C1880008F100E14FF
+:104AA0003C058000AF100E108F190E1CAF190E18A8
+:104AB000AF060E008CB200003255000812A0FFFDB8
+:104AC0000000000094BF0E0800C088210000902163
+:104AD000A79F00408CA60E0424130001AF86003867
+:104AE000976900103135FFFF8E8C00000191202363
+:104AF00010800118AE8400009367000814E000D80D
+:104B0000000000000E0001B4240400108F8E004845
+:104B10003C0332000040282131C600FF00063C0063
+:104B200000E3602525CD0001AF8D0048AC4C0000AE
+:104B30009362000997640012937F000A304A00FFD5
+:104B4000308BFFFF014B48210009CC0033F000FF00
+:104B50000330C025ACB800048F8F00489788004010
+:104B60003103200010600103ACAF0008976F001202
+:104B700031E8FFFF06400101ACA8000C979000400F
+:104B80003205000814A0000226280006262800028C
+:104B90003C048000948B0E148C850E1C8F670004DF
+:104BA000936A00023164FFFF314900FFAFA9001092
+:104BB0008F7F0014AFA80018AFBF00140E00019A39
+:104BC00000000000240400100E0001C800000000D6
+:104BD0008E92000016400005000000008F7900143E
+:104BE0002405FFBF0325A024AF7400148F69000CB7
+:104BF0000135F821AF7F000C9375000816A000085E
+:104C00000000000012600006000000008F6B00141E
+:104C10003C0CEFFF3584FFFE01645024AF6A0014A2
+:104C2000A37300088FA700200A000316022020218A
+:104C3000AED10E000A0001F83C05800014E0FF210F
+:104C400030B9A0400E0001600000A0212E910001AB
+:104C50000237B02512C000178FBF00488F85003C77
+:104C600024170F0010B700CD3C0480008C99017808
+:104C70000720FFFE24150F0050B500EB3C04800018
+:104C80008C890E14240502403C141000AC890144A8
+:104C90008C9F0E1CAC9F0148A0800152A480015A39
+:104CA000AC800160A4800158AC850154AC940178BB
+:104CB0008FBF00488FB700448FB600408FB5003CCF
+:104CC0008FB400388FB300348FB200308FB1002C16
+:104CD0008FB0002803E0000827BD00508F910038F6
+:104CE000979300403C1280000220A821326A0040C5
+:104CF0001540FF7D00009821976B00108F850038CC
+:104D00003162FFFF104500A2000020210080A02199
+:104D1000108000E500E088211620FED2000000008F
+:104D20000A0002E72E9100013C0380008C7F01788D
+:104D300007E0FFFE240408008F860000AC640178C1
+:104D40003C038000946C008A318BFFFF0166502386
+:104D50002549FFFF31281FFF2D0200081440FFF9ED
+:104D6000000000008F8E0048346F40008F83003CAD
+:104D700000E0A021240D0F0025C70001AF870048E7
+:104D800000CF3021023488233C08800031D500FF59
+:104D9000106D000524070001939300423272000158
+:104DA0000012824036070001001514003C09010082
+:104DB00000492025ACC400008F9F004830B9003660
+:104DC00030B80008ACDF00041300009000F998250B
+:104DD00095070E0A8F8E00003C03810030EDFFFF27
+:104DE00025CB000801A328253C0C1000316A1FFFC9
+:104DF000269200062406000EAD050160026C98257F
+:104E0000A506015AAF8A0000A51201581620000815
+:104E10003C1080008F99003C24180F00533800028A
+:104E200024170001367300400E0001593C10800029
+:104E30008E1F0E1402402021AE1F01448E120E1C44
+:104E4000AE120148A2150152AE1301540E000167C3
+:104E50003C151000AE1501780A000319000000008F
+:104E600093780009976300129368000B330F00FFDB
+:104E700001E33821310200FF00E2702125D0000A51
+:104E80003210FFFF0E0001B4020020218F8600487F
+:104E90003C1941003C07800024CD0001AF8D004843
+:104EA000936C00099764001230C600FF318A00FF3E
+:104EB000308BFFFF014B482100062C00253F0002EC
+:104EC00000BFC02503197825AC4F00008F68000C87
+:104ED00094EE0E1401121825AC4300048CE50E1C50
+:104EE0008F670004936D000231C4FFFF31AC00FFF7
+:104EF000AFAC00108F620014AFB100180E00019A21
+:104F0000AFA200140A0002C502002021AF60000415
+:104F1000A3600002978D004031AC20001580FEABED
+:104F200000003021A7600012979000409378000A9B
+:104F30003C03800032191F000019798301F84021D9
+:104F400025070028A3670009946E0E0C0A00025E74
+:104F5000A76E00108F6E001435CD00400E00015971
+:104F6000AF6D00140A000291000000000A00031651
+:104F7000000020210641FF01ACA0000C8CB8000C01
+:104F80003C198000031990250A0002B2ACB2000C53
+:104F9000000090210A00028D2413000112800005F8
+:104FA0003C0D800095A60E0830D3004012600042F0
+:104FB000000000008C9001780600FFFE0000000059
+:104FC00094920E103C030500240720003258FFFF86
+:104FD00003037825AC8F014C8C880E143C0E100016
+:104FE000AC8801448C820E1CAC820148A080015226
+:104FF000A480015AAC800160A4800158AC870154A0
+:10500000AC8E01780A0002EE3C0480008F90000014
+:1050100026920002A5120158260F000831E81FFF52
+:105020000A000356AF880000AC80014C12800019C2
+:10503000000000008C8A0E10AC8A01448C830E188C
+:105040003C0C800024160040AC8301488FBF004810
+:10505000A18001528FB70044A580015A8FB5003C52
+:10506000AD8001608FB40038A58001588FB3003443
+:10507000AD9601548FB200308FB600408FB1002C36
+:105080008FB000283C04100027BD005003E000084A
+:10509000AD8401788C8B0E14AC8B01448C830E1C78
+:1050A0000A0003E43C0C80000E0001602E91000118
+:1050B0000A0002E80237B025000000000000000DE1
+:1050C000000000002400033A0A0003C03C048000F2
+:1050D00027BDFFE0AFBF001C3C1F20FF3C07600066
+:1050E0003C0980002402001037F9FFFDACE23008D3
+:1050F000AFB20018AFB10014AFB00010AD390E0060
+:10510000000000000000000000000000000000009F
+:10511000000000003C1800FF3712FFFDAD320E000A
+:105120003C0B60048D7050002411FF7F3C0E000288
+:105130000211782435EC380C35CD0109ACED4C1852
+:10514000240A0009AD6C50008CE80438AD2A000830
+:10515000AD2000148CE54C1C3106FFFF38C42F71C4
+:1051600000051E023062000F2486C0B31040000705
+:10517000AF8200088CE54C1C3C09001F3528FC0060
+:1051800000A81824000321C2AF8400048CF1080891
+:105190003C0F57092412F0000232702435F0001041
+:1051A00001D0602601CF68262DAA00012D8B0001B9
+:1051B000014B382550E00009A380000C3C02601C24
+:1051C0008C590008241F0001A39F000C33387C0079
+:1051D000A7980010A780000EA380000DAF800048A4
+:1051E00014C00003AF8000003C066000ACC0442C3B
+:1051F0000E0004B63C1080000E000DDF0000000021
+:105200003C110800263138C83C12080026523948A3
+:105210008E05000038A30001306400011480FFFCFB
+:10522000000000008E0601003C0C800A240AFF806A
+:1052300024C7024030EB007F016C482100EA402483
+:10524000AE060020AF890044AE0800243C03800075
+:10525000AF86003C8C6D017805A0FFFE2419080084
+:10526000AC79017890780108A3980042938F0042AE
+:1052700031EE000111C0000F240D0D0024C2F80012
+:105280002C5F030113E0001C000629C224A3FFF0D9
+:1052900000032042000431400E0001CF00D1D8218C
+:1052A0003C0440003C068000ACC401380A000457AE
+:1052B0000000000010CD0026240E0F0010CE002AA2
+:1052C0003C028008345F008093F90000240F0050F6
+:1052D000333800FF170FFFF33C0440000E000912A3
+:1052E000000000003C0440003C068000ACC40138D3
+:1052F0000A000457000000008F83000400A3402B25
+:105300001500000B8F8B0008006B50212547FFFF15
+:1053100000E5482B1520000600A36023000C29405F
+:105320000E0001CF00B2D8210A00047C3C044000EA
+:10533000000000000000000D00000000240003AD8C
+:105340000E0001CF000000000A00047C3C04400075
+:105350003C1B0800277B3A480E0001CF00000000EC
+:105360000A00047C3C0440003C1B0800277B3A6890
+:105370000E0001CF000000000A00047C3C04400045
+:10538000000411C003E00008244202403C0408006D
+:1053900024843AAC2405001A0A00006D0000302174
+:1053A00027BDFFE0AFBF001CAFB20018AFB10014C3
+:1053B000AFB000103C108000920B01092412FF8056
+:1053C0000E0004B33164007F8F91003C00515021E6
+:1053D00001524024AE080024920301090E0004B3D8
+:1053E0003064007F24060080240700C024040040AD
+:1053F000AE000810AE040814AE060818AE07081C6C
+:10540000920C01090051F82133F8007F3C19800A01
+:10541000031910213184007F0E0004B3AF820044D1
+:105420008E1101003C0C008035850001022278219C
+:1054300001F24824AE0908048E0E010035980002DE
+:105440003609090001C2682131AB00780165502599
+:10545000AE0A08208E0501008E080100360509807D
+:10546000010218212464004000923024AE0608088E
+:105470008E07010000E2F82127F90040333200785E
+:1054800002588825AE1108248E040100952F000CC7
+:105490008FBF001C8FB2001831EEFFFF000E69C0F5
+:1054A000AE0D0800AE0C0828952B000C8FB100142F
+:1054B000316AFFFF000A41C0AE08002C8CA30050E7
+:1054C0008FB000108CA2003C8D2400048CA6001C20
+:1054D0008CA7003827BD0020AF830060AF8200504A
+:1054E000AF84004CAF86005803E00008AF87005C33
+:1054F0003C0A0800914A3AD13C09080095293ACA69
+:105500003C051100000A3C002528000200E8302577
+:1055100000C5182524820008AC83000003E00008C1
+:10552000AC8000043C098000352809009107001177
+:10553000240200280080502130E300FF00A06821F1
+:1055400000C0602110620002340B86DD240B0800CD
+:105550003C07800034E20A9A9443000034F80A9C25
+:1055600034E60AA03079FFFFAD5900008F0F00002C
+:1055700034E80A8024040001AD4F00048CCE000002
+:10558000AD4E00089105001930A3000310640046D9
+:1055900028690002152000B5240400021064009060
+:1055A000240500031065009B34E40AA43C090800AC
+:1055B00095293AC024070800516700503C18800024
+:1055C0003C0280003459090093280012932E0019E0
+:1055D00034580980310F00FF8F06002801EC182194
+:1055E000000338803124FFFF31CB00FF00E410219D
+:1055F000000B2D0000A6C02500027C003C086000C6
+:105600000308182535E906FFAD430000AD49000445
+:105610008F2E002C3C0380003478093CAD4E0008EE
+:105620008F27003025490028346E0900AD47000C53
+:105630008F2B0034AD4B00108F240038AD44001484
+:105640008F25001CAD4500188F220020AD42001CA4
+:105650008F26002425220014AD4600208F28002824
+:10566000AD4800248F0F0000AD2D0004AD2F0000C9
+:105670008C64010CAD24000891C700123C050800A1
+:1056800090A53AD0AD20001030EB00FF016C302126
+:1056900000066F000005CC0001B96025358AFFFFC8
+:1056A00003E00008AD2A000C3C09080095293AC027
+:1056B0003C19080097393ACA34E20AA43C060800AB
+:1056C00094C63ABC944F00003123FFFF0323C0214E
+:1056D00003067023000F3C0025C8FFF200E82825D0
+:1056E00024070800AD45000CAD400010AD4B001480
+:1056F0001567FFB3254A00183C18800037080900D9
+:10570000910F00119107001937030A8031EE00FF55
+:105710003C19080097393AC6946F002A000E588247
+:1057200030E400FF97870054000B160000042C00A3
+:105730003126FFFF0326C02100454825013870258A
+:1057400001E758213C03400001C32025000B2C0039
+:10575000AD440000AD450004910200183C0600066F
+:105760003C0380000002CE000326C025AD5800088F
+:105770008D0F002C3478093C24E90001AD4F000C5A
+:105780008D0B001C312E7FFF25490014AD4B0010FE
+:105790008F0F0000AD2D0004A78E0054AD2F000028
+:1057A0008C64010C346E090025220014AD2400081D
+:1057B00091C700123C05080090A53AD0AD2000101A
+:1057C00030EB00FF016C302100066F000005CC00BB
+:1057D00001B96025358AFFFF03E00008AD2A000CFF
+:1057E00034E90AA495240000950200283C09080029
+:1057F00095293AC000041C000002CC0034788100D6
+:10580000032B7825AD58000CAD4F00100A00054061
+:10581000254A00143C09080095293AC03C050800B7
+:1058200094A53ACA3C06080094C63ABC9499000074
+:105830003123FFFF9518002800A31021004678238C
+:1058400000193C000018440025EEFFEE010E28254B
+:1058500034E48100AD44000CAD450010AD400014AF
+:10586000AD4B00180A000540254A001C1460FF4F8C
+:1058700034E60AA494CE00003C09080095293AC0F9
+:10588000000E4400010B3825AD47000C0A0005400E
+:10589000254A001003E00008240207D027BDFFE0DE
+:1058A000AFB20018AFB10014AFB00010AFBF001C12
+:1058B0000E00004D008088218F8800508F87004C9B
+:1058C0003C05800834B20080011128213C10800082
+:1058D00024020080240300C000A72023AE02081881
+:1058E0003C068008AE03081C18800004AF850050F9
+:1058F000ACC500048CC90004AF89004C122000091B
+:10590000360409800E0005F800000000924C0027C4
+:105910008E0B007401825004014B3021AE46000C06
+:10592000360409808C8E001C8F8F005801CF6823AD
+:1059300019A000048FBF001C8C90001CAF90005871
+:105940008FBF001C8FB200188FB100148FB00010F1
+:105950000A00004F27BD00208F8600608F83005013
+:105960008F82004C3C05800834A40080AC86005037
+:10597000AC83003C03E00008ACA200043C03080038
+:105980008C63005427BDFFF8308400FF24620001BF
+:1059900030A500FF3C010800AC22005430C600FFD7
+:1059A0003C0780008CE801780500FFFE3C0A7FFF81
+:1059B000A3A400038FA400003549FFFF0089182429
+:1059C000000647C000681025AFA2000090F9010A48
+:1059D000A3A000023C1880FFA3B900018FAE000015
+:1059E00030AD007F370FFFFF01CF5824000D660058
+:1059F0003C090020016C5025352620002405FF803D
+:105A00003C04100027BD0008ACEA014CACE6015490
+:105A1000A4E00158A0E5015203E00008ACE40178DD
+:105A2000308800FF3C03800030A400FF8C620178C6
+:105A30000440FFFE000000003C03800034660A00C2
+:105A40008CCA0020346709800004482BAC6A0144EA
+:105A50008CC5002400091540AC650148A0680150C0
+:105A600090E4004CA064016D03E00008A4600158BC
+:105A700027BDFFE8308400FFAFBF00100E00065BBB
+:105A800030A500FF8F8300508FBF00103C058000C1
+:105A9000344600402404FF903C02100027BD00184B
+:105AA000ACA3014CA0A40152ACA6015403E0000831
+:105AB000ACA2017827BDFFE03C088008AFBF001C06
+:105AC000AFB20018AFB10014AFB0001035100080B5
+:105AD0008E0600183C078000309200FF00C720258A
+:105AE000AE0400180E00004D30B100FF9203000517
+:105AF000346200080E00004FA2020005024020217F
+:105B00000E00066F02202821024020218FBF001CBA
+:105B10008FB200188FB100148FB00010240500055B
+:105B2000240600010A00063227BD00203C05800043
+:105B300034A309809066000830C200081040000FAE
+:105B40003C0A01013549080AAC8900008CA80074A0
+:105B5000AC8800043C07080090E73AD030E500101C
+:105B600050A00008AC8000083C0D800835AC0080D7
+:105B70008D8B0058AC8B00082484000C03E00008D7
+:105B8000008010210A0006B22484000C27BDFFE823
+:105B90003C088000AFB00010AFBF0014350609808C
+:105BA00090C70009240200063509090030E300FF10
+:105BB0000080802100A06021240B00041062007985
+:105BC0002407000294CF005C3C0E020431EDFFFF7D
+:105BD00001AE5025AE0A000090C5000830A4002098
+:105BE000108000080000000090C2004E3C1F01031E
+:105BF00037F90300305800FF03193025240B000843
+:105C0000AE06000491390011912600129124001172
+:105C1000333800FF0018708230CF00FF01CF5021D1
+:105C2000014C6821308800FF31AAFFFF39030028AA
+:105C3000000A28801460002B0205402391240012E2
+:105C40003C0E800035D90980308500FF00AC18215A
+:105C500000031080004BF821001F8400360906FF66
+:105C6000AD09000435C9090091260011912F0012D9
+:105C7000000BC0828F2B003431ED00FF8DC4010C6E
+:105C800001AC282100B810210164F823000784002A
+:105C900000021F000070C82533E9FFFF30CF00FC71
+:105CA000032970250158202101E868210004508053
+:105CB000ADAE000C0E00004D010A80213C078008AB
+:105CC000240C000434EB00800E00004FA16C00098E
+:105CD000020010218FBF00148FB0001003E00008F5
+:105CE00027BD001891250011912300193C180800C8
+:105CF00097183AC630A200FF0002F882307000FF09
+:105D0000001FCE0000104C000329302500D870255C
+:105D10003C0F400001CF68253C0E8000AD0D000017
+:105D200035C9090091260011912F001235D909803B
+:105D3000000BC08231ED00FF8F2B00348DC4010CAD
+:105D400001AC282100B810210164F8230007840069
+:105D500000021F000070C82533E9FFFF30CF00FCB0
+:105D6000032970250158202101E868210004508092
+:105D7000ADAE000C0E00004D010A80213C078008EA
+:105D8000240C000434EB00800E00004FA16C0009CD
+:105D9000020010218FBF00148FB0001003E0000834
+:105DA00027BD00180A0006C42407001227BDFFD033
+:105DB000AFB50024AFB40020AFB3001CAFB00010EB
+:105DC000AFBF0028AFB20018AFB100143C0680008E
+:105DD00090C3010B309300FF30B400FF30620030FD
+:105DE0000000A821104000820000802134C40980F6
+:105DF0009088000800083E0000072E0304A000A9B8
+:105E0000240400048F8700503C010800A0243AD0ED
+:105E10003C0C8000AD8000483C038000906E010B7C
+:105E200031C5002010A000073C0C800034780980A8
+:105E30009312000800128E0000117E0305E000AEF0
+:105E40003C028008918B010B3586098090C40008C4
+:105E5000316A0040000A482B3088000824110003F2
+:105E60001500000200E99023000088213C03800017
+:105E700034780A80346A09009707002C9144001195
+:105E80009149001293050018309F00FF312800FF50
+:105E9000022810210002C880930D0018033F7821CA
+:105EA00001F0702130B000FF01D01821A787005405
+:105EB0003C010800A42E3AC63C010800A4233AC8BD
+:105EC00015A00003246B000A0000000D246B000ADB
+:105ED0003170FFFF3C010800A4233ACA3C010800CE
+:105EE000A4203AC03C010800A4203ABC0E0001B432
+:105EF000020020210E00050F00402021004020213B
+:105F0000024028210E00051C022030210E00069EB2
+:105F10000040202116A0005F004020210E0001C893
+:105F2000020020213C11080092313AD032350003A2
+:105F300012A000163C0A80088F8700503C0E800893
+:105F400035CD008024EC0001ADAC003C3C05800860
+:105F50008CA600040180202100CC90231A4000026E
+:105F6000AF8C00508CA400040E0005F8ACA4000413
+:105F70003C1980008F3800743C0F800835F0008099
+:105F800000582821AE05000C3C0A800835420080EC
+:105F90000260202102802821A040006B0E00065BD9
+:105FA0003C1380008F840050345F0006AE64014CC7
+:105FB0008F8800483C1410008FB50024250900018B
+:105FC000AF8900488FB20018A26801528FB1001447
+:105FD000AE7F01548FB00010AE7401788FBF0028DF
+:105FE0008FB400208FB3001C03E0000827BD0030F1
+:105FF00034C30980906F0008000F7600000E6E0316
+:1060000005A0003334C209009059001B241F001062
+:106010003C010800A03F3AD0333800021300FF7E55
+:106020008F8700508F83005C1467FF7C3C038000E7
+:106030000E00004D000000003C098008352500805E
+:1060400090A4000924070016308800FF1107000DF6
+:106050000000000090A600093C0C0800918C3AD08A
+:10606000240A000830C400FF358B00013C01080001
+:10607000A02B3AD0108A002F240D000A108D002882
+:106080002402000C0E00004F000000000A00075917
+:106090008F8700500E0006B6022028210A00079ABA
+:1060A000000000003C0B8008356A00808D470054DA
+:1060B0008CC9010C1120FF54AF8700502406001436
+:1060C0003C010800A0263AD00A0007583C0C80008A
+:1060D00090710008241200023C010800A0323AD05E
+:1060E000323000201200000B241500018F87005071
+:1060F0000A00075924100008345900808F23003803
+:10610000AC4300048C5F0004AF3F003C0A0007640E
+:106110003C0C80008F8700500A00075924100004AF
+:10612000A0A200090E00004F000000000A0007595D
+:106130008F870050240200140A00081CA0A2000946
+:1061400027BDFFE8AFBF0014AFB000103C108000C7
+:1061500092020109240500010E00065B304400FF95
+:106160003C1F800893F8000E37E3008093F9000F7E
+:10617000906E002693E9000A332F00FF0018660096
+:10618000000F6C0031CB00FF018D5025000B320059
+:1061900001463825312800FF3445600000E82025FD
+:1061A0002402FF813C031000AE04014C8FBF001499
+:1061B000AE050154A2020152AE0301788FB0001067
+:1061C00003E0000827BD001827BDFFE8308400FF6A
+:1061D000AFBF00100E00065B30A500FF3446004044
+:1061E0003C0480002405FF92AC860154A085015236
+:1061F0008F8300508FBF00103C02100027BD001895
+:10620000AC83014C03E00008AC82017827BDFFD8C5
+:10621000AFB20018AFB10014AFB00010AFBF002094
+:10622000AFB3001C3C07800090E20109308600FFFC
+:1062300030B000FF000618C23204000230710001C5
+:1062400014800007305200FF3C098008353300807D
+:10625000926800053105000810A0000C30CA00103B
+:10626000024020210E000680022028212402000185
+:106270008FBF00208FB3001C8FB200188FB10014A5
+:106280008FB0001003E0000827BD00281540003043
+:1062900034E50A008CB900248CB800081338004794
+:1062A000000040213C0E800835D30080926D0068CC
+:1062B000240B000231AC00FF118B00803C068000F3
+:1062C000927F004C90C40109509F00043213007C5F
+:1062D00011000067000000003213007C1660005AB5
+:1062E0000240202116200008320C00013C078000EB
+:1062F00034EB0A008D6500248CE8010414A8FFDC4F
+:1063000000001021320C00011180000D02402021FC
+:106310003C1080008E0E010C8F8D006011CD0008A6
+:10632000000000000E00073E022028218E0F010C05
+:106330003C18800837100080AE0F0050024020212A
+:106340000E00066F022028210A00086F24020001B7
+:106350003C0708008CE7006424E600013C010800CB
+:10636000AC2600641600000D000000000220282169
+:106370000E00066F02402021926F0068240D00027B
+:1063800031EE00FF11CD0022024020210E00082333
+:10639000000000000A00086F240200010E00004106
+:1063A00024040001926C0025020C58250E00004FB9
+:1063B000A26B00250A0008AF022028218E63001876
+:1063C0008CE401048CBF002400031602149FFFB567
+:1063D0003045007F9269004C264400013093007FD5
+:1063E00012650040312300FF1464FFAF3C0E8008AB
+:1063F000264800013111007F310200FF1225000BF9
+:1064000024080001004090210A00087C24110001AA
+:10641000240500040E000632240600010E000823A5
+:10642000000000000A00086F240200012407FF801A
+:106430000247282400A79026324200FF0040902106
+:106440000A00087C241100010E00073E02202821CA
+:106450003206003010C0FFA332100082024020211B
+:106460000E000680022028210A00086F2402000185
+:106470008E6300180240202102202821006610258A
+:106480000E000845AE6200189264004C240500031B
+:10649000240600010E000632308400FF0E00004189
+:1064A00024040001926A0025020A48250E00004FCC
+:1064B000A26900250A00086F240200018E780018E6
+:1064C0003C19800002402021031978250220282150
+:1064D0000E00066FAE6F00189264004C0A0008F7B9
+:1064E000240500043246008038CA0080146AFF6E1A
+:1064F0003C0E80080A0008D02648000127BDFFC0D6
+:10650000AFB000183C108000AFBF0038AFB7003408
+:10651000AFB60030AFB5002CAFB40028AFB3002445
+:10652000AFB200200E0004BBAFB1001C9204010802
+:106530009205010B308400FF0E00085630A500FFC5
+:10654000144000E38FBF00383C09800835280080E4
+:10655000A100006B3607098090E60000240200507D
+:106560003C17080026F73A8830C300FF3C130800A8
+:1065700026733A98106200033C1080000000B82196
+:1065800000009821241F001036110A0036140980DB
+:106590008E1601048F8D00508E38002436190A8023
+:1065A0008E9200203C010800A03F3AD0972C002C8E
+:1065B0008EF50000932B0018024D702302D878232B
+:1065C0003C010800AC2F3AAC3C010800AC2E3AB0BC
+:1065D0003C010800AC2D3AD4A78C005402A0F80965
+:1065E000317200FF304A0002154000E630450001DC
+:1065F00010A000C100000000928A0008315000087D
+:1066000016000002241400030000A0213C068000B4
+:1066100034C4090034C30A008C6E00249085001134
+:10662000908200129099001130B800FF305100FFA5
+:106630000291F821001FB080332F00FF02D85821AB
+:10664000024FA82126AC0010017268213C15800081
+:106650003C010800AC2E3AD83C010800A42D3AC8F1
+:106660003C010800A42C3AC43C010800A42B3AC603
+:1066700036B609808F8700508F8900588ED200204F
+:106680002408000601273023024728233C01080084
+:10669000AC283ACC04C000B30000902104A000B1A3
+:1066A00000C5802B120000B3000000003C01080070
+:1066B000AC263AB08E7100000220F80900000000FC
+:1066C000304A00021540007400408021304B000128
+:1066D000556000118E7100043C0D08008DAD3AB478
+:1066E0003C0EC0003C04800001AE6025AEAC0E0044
+:1066F0008C980000330F000811E0FFFD000000003F
+:10670000949F0E0824120001A79F00408C990E044C
+:10671000AF9900388E7100040220F80900000000D3
+:106720000202802532020002144000A9000000008D
+:106730003C08080095083ABC3C11080096313AC85C
+:106740003C09080095293ABE3C0308008C633AB422
+:10675000011168213C1F08008FFF3AD83C07080050
+:1067600094E73AD23C11800001A920218E38010C17
+:10677000006828212499000200A7702103E37821F2
+:10678000AF9800603C010800AC2F3AD83C010800EB
+:10679000A42E3AC03C010800A42D3ACA0E0001B450
+:1067A0003324FFFF8F8C0048004020213C0108006B
+:1067B000A02C3AD18E620008258B0001AF8B0048D7
+:1067C0000040F809000000008F8500500280302151
+:1067D0000E00051C004020210E00069E00402021D6
+:1067E0008E6A000C0140F809004020213C08080096
+:1067F00095083ACA3C09080095293ABE0109382192
+:1068000024E600020E0001C830C4FFFF3C0408006B
+:106810008C843AAC3C0308008C633AB40083282390
+:106820003C010800AC253AAC14A0000600000000B2
+:106830003C0A08008D4A3ACC354600403C0108002D
+:10684000AC263ACC124000418F8C00448E2B0E10A7
+:106850008F920044AE4B00208E220E18AE420024D0
+:106860003C04080094843AC00E0005FA00000000C1
+:106870008F9900508E7800103C010800AC393AD452
+:106880000300F809000000003C0F08008DEF3AAC4F
+:1068900015E0FF798F870050979400543C13800EC9
+:1068A000321500100E000629A674002C56A00044D4
+:1068B0008EF60004321F004057E0001D8EF00008E5
+:1068C0008EE3000C0060F809000000008FBF003864
+:1068D0008FB700348FB600308FB5002C8FB40028EE
+:1068E0008FB300248FB200208FB1001C8FB000182E
+:1068F00003E0000827BD0040920901098F88003C91
+:1069000000093E0000E83025AE0600808E230020FE
+:106910008E240024AFA30010AE030E148FA200102B
+:10692000AE020E10AE040E1C0A000951AE040E1881
+:106930000200F809000000008EE3000C0060F80976
+:10694000000000000A000A078FBF0038240E000173
+:10695000240D0001A5800020A58E00220A0009EB6D
+:10696000AD8D00243C010800AC203AB00A0009813A
+:106970008E7100003C010800AC253AB00A00098184
+:106980008E71000092110109000028210E00066F8F
+:10699000322400FF8FBF00388FB700348FB600302D
+:1069A0008FB5002C8FB400288FB300248FB2002045
+:1069B0008FB1001C8FB0001803E0000827BD004015
+:1069C00002C0F809000000000A000A01321F00405E
+:1069D0005240FFB2979400548EB60E148F93004429
+:1069E000AE7600208EB40E1CAE7400240A0009FAA4
+:1069F000979400548F8200140004218003E0000863
+:106A0000008210213C07800834E200809043006936
+:106A100000804021106000093C0401003C07080090
+:106A20008CE73AD48F83003000E3202304800008F1
+:106A30009389001C14E300030100202103E00008F7
+:106A4000008010213C04010003E0000800801021B8
+:106A50001120000B006738233C0D800035AC098005
+:106A6000918B007C316A000211400020240900341F
+:106A700000E9702B15C0FFF10100202100E9382347
+:106A80002403FFFC00A3C82400E3C02400F9782BF2
+:106A900015E0FFEA0308202130C40003000410239E
+:106AA00014C00014304900030000302100A97821EF
+:106AB00001E6702100EE682B11A0FFE03C0401000C
+:106AC0002D3800010006C82B010548210319382480
+:106AD00014E0FFDA2524FFFC2402FFFC00A21824A6
+:106AE0000068202103E00008008010210A000A6FDE
+:106AF000240900303C0C80003586098090CB007C56
+:106B0000316A00041540FFE9240600040A000A7EE9
+:106B1000000030213C0308008C63005C8F82001869
+:106B200027BDFFE8AFBF001410620005AFB0001032
+:106B3000000329C024A40280AF840014AF8300188E
+:106B40003C10800036030A00946500320E000A50A3
+:106B500030A43FFF8E0401003C180080370F000373
+:106B60000082C8212402FF80032260243329007F91
+:106B7000000CF94003E94025332E00783C0D10004D
+:106B8000010D502501CF5825AE0C0028360809808C
+:106B9000AE0C080CAE0B082CAE0A0830910300694D
+:106BA0003C06800C0126382110600006AF870034B7
+:106BB0008D09003C8D06006C0126382318E0007F0B
+:106BC000000000003C0C8008358B00803C0A8000EF
+:106BD000A1600069355009808E0200383C068000B3
+:106BE00034C50A0090AD003C31A800201100001906
+:106BF000AF820030240E00013C19800037300A00BB
+:106C0000A38E001CAF8000248E0400248F850024F6
+:106C100024180008AF800020AF8000283C01080045
+:106C2000A4383ABE3C010800A4203AD20E000A540F
+:106C300000003021920F003C8FBF00148FB0001075
+:106C4000000F7142AF82002C27BD001803E000083E
+:106C500031C2000190B90032240F0001333800FF27
+:106C600000182182108F003F241F0002109F006235
+:106C700034C20AC03C03800034640A008C990024AA
+:106C80001720001D3466090090830030241F000582
+:106C90003062003F105F004C240500018F86002009
+:106CA000A385001CAF860028AF8600243C19800015
+:106CB00037300A008E0400248F8500242418000831
+:106CC0003C010800A4383ABE3C010800A4203AD296
+:106CD0000E000A5400000000920F003C8FBF001409
+:106CE0008FB00010000F7142AF82002C27BD00183A
+:106CF00003E0000831C200018C8800088C8D00245C
+:106D00008CCB00643C19800037300A00AF8B002424
+:106D1000A380001C8E0400248F8600208F85002411
+:106D2000010D602324180008AF8C00283C010800E6
+:106D3000A4383ABE3C010800A4203AD20E000A54FE
+:106D400000000000920F003C8FBF00148FB00010B5
+:106D5000000F7142AF82002C27BD001803E000082D
+:106D600031C2000190A7003030E3003F506400289A
+:106D700034C50AC08CAA00241540002234C809007A
+:106D80008CAB00483C0C7FFF3585FFFF016510246C
+:106D90003C188000AF820020370509008F8E00204C
+:106DA0008CAF006001CF682B15A0000201C020212C
+:106DB0008CA400600A000AF0AF8400208D02006CF1
+:106DC0000A000ACB3C0680008C8900488F86002090
+:106DD0003C0A7FFF3550FFFF013038243C04800817
+:106DE00024050001AF870028AC80006CA385001C3F
+:106DF0000A000AFEAF8600248C4400140A000AF040
+:106E0000AF8400208D0200680A000B383C18800017
+:106E100034C409808C8600708CB0001400D0482BDC
+:106E200011200004000000008C8200700A000B3862
+:106E30003C1880008CA200140A000B383C1880001B
+:106E40008F85002427BDFFE0AFBF0018AFB100144D
+:106E500014A00008AFB000103C04800034870A0082
+:106E600090E600302402000530C3003F106200B7F6
+:106E7000348409008F91002000A080213C04800010
+:106E8000348E0A008DCD00043C0608008CC63AB052
+:106E900031A73FFF00E6602B5580000100E0302164
+:106EA000938F001C11E0007600D0102B34990980DC
+:106EB0009338007C330400021080007724030034F0
+:106EC00000C3F82B17E000D600C3302300D0102BEE
+:106ED0003C010800A4233ABC1440006D02001821B4
+:106EE0003C0408008C843AAC0064282B54A00001B8
+:106EF000006020213C05800034A90A009128003C54
+:106F00003C010800AC243AB43103002014600002B4
+:106F1000000048218CA90E188F88002C0128502BC6
+:106F20001140005F000000003C0508008CA53AB449
+:106F300000A96021010C582B1160005C00B0682B87
+:106F40000109382300E028213C010800AC273AB4AD
+:106F5000120000032402FFFC10B0008C322A000350
+:106F600000A2F8243C010800A4203AD23C01080009
+:106F7000AC3F3AB403E028218F84002412040006B9
+:106F80003C0380088C6A006C02002021AF91002035
+:106F900025500001AC70006C8F8B00280085882381
+:106FA000AF91002401652023AF8400281220000245
+:106FB00024070018240700103C0E800835C6008006
+:106FC00090CD0068240C00013C010800A0273AD0B5
+:106FD00031A700FF10EC00470000000014800018EB
+:106FE000000028213C0B8000916501093571098062
+:106FF0008E23001830A500FF0003560224A30001D1
+:107000003146007F3070007F1206007E240CFF8026
+:107010003C0F800835E90080A123004C3C080800A3
+:107020008D083ACC240E00023C010800A02E3B1132
+:10703000350D00083C010800AC2D3ACC24050010A9
+:107040003C1F800037E40A009099003C3338002050
+:107050001300000500A02021240200013C010800CB
+:10706000AC223AB434A400018FBF00188FB10014D1
+:107070008FB000100080102103E0000827BD002021
+:107080003C010800A4203ABC1040FF9502001821E2
+:107090000A000B8B00C018210A000B832403003068
+:1070A0003C0508008CA53AB400B0682B11A0FFA8DD
+:1070B000000000003C04080094843ABC008578215C
+:1070C00001E7702B11C000072CA200043C1F6000D8
+:1070D0008FF954043338003F1700FFE324040042C3
+:1070E0002CA200041040FF9A240400420A000BEE78
+:1070F0008FBF00181528FFB9000000008CC20018CF
+:107100003C188000241900020058F825ACDF001854
+:1071100037040A00A0D900689089003C240F0004BD
+:1071200000A01021312800203C010800A02F3B11B5
+:107130001100000224050010240200013C01080097
+:10714000AC223AAC0A000BE43C1F80008F88002878
+:107150008C8900600109282B14A0000201008821FD
+:107160008C9100603C0B80008D640E18240A000195
+:107170000220282102203021A38A001C0E000A547C
+:10718000022080210A000B72AF82002C000A182313
+:1071900012200007306400033C0D800035A70980F1
+:1071A00090EC007C318B000415600019248E0004E3
+:1071B0003C010800A4243AD23C18080097183AD29F
+:1071C0000305202100C4782B11E0FF6C8F8400247C
+:1071D0002CA6000514C0FFA42404004230B900030B
+:1071E0001720000200B9182324A3FFFC3C0108006B
+:1071F000AC233AB43C010800A4203AD20A000BB1F7
+:107200000060282100AC38240A000BD700EC1826B7
+:107210003C010800A42E3AD20A000C4100000000F4
+:107220003C010800AC203AB40A000BED24040042F3
+:107230008F8300283C0B8000356A0A00146000062A
+:1072400000001021914600302405000530C400FFE5
+:10725000108500030000000003E0000800000000AB
+:1072600091490048312800FF000839C214E0FFFAB4
+:107270003C0480083C06080094C63ABC3C03080065
+:107280008C633AD43C0508008CA53AB43C1808003D
+:1072900097183AD20066C8218C8E00040325782105
+:1072A00001F8682101AE60231980001D0000000074
+:1072B0009158004C8F8D0034956E0E10330F00FFE7
+:1072C0008DA9000401CF30238DAA000030CFFFFF2D
+:1072D000000F6100012C28210000382101472021E6
+:1072E00000AC182B0083C821ADA50004ADB9000087
+:1072F00091B8000A01F87021A1AE000A956C0E1237
+:107300008F8A0034A54C00089549003825280001D3
+:10731000A54800389147000D34EB0008A14B000D43
+:1073200003E000080000000027BDFFD8AFB0001840
+:10733000938F001C8FB000143C087FFF8F870024C0
+:107340003C0C80003518FFFFAFBF0020AFB1001C20
+:1073500035990A0002181824932A003C000F5FC0D8
+:107360003C02BFFF2CF000013449FFFF006BF82501
+:107370003C0808008D083AD48F9900303C1808006A
+:1073800097183ACA03E9582400107F803C07EFFFA2
+:107390003C05F0FF016F18253C11800031490020A9
+:1073A00034E2FFFF34ADFFFF362E098027A5001021
+:1073B0002406000201194023270A00020062182453
+:1073C0000080802115200002000058218D8B0E1CAA
+:1073D000A7AA00120500003A2407000030EF00FFC2
+:1073E000000F3F00006740253C028008AFA8001452
+:1073F000344B0080916A00683C0F080091EF3AD14D
+:107400003C09DFFF353FFFFF000A602B3C0208000C
+:1074100094423AC4A3AF0011011FC024000CCF4016
+:10742000031918258FA70010AFA300143C1F0800F4
+:1074300093FF3AD3A7A200168FA8001400ED4824AA
+:107440003C0B01003C0A0FFF012BC82533F8000359
+:10745000354CFFFF010D78243C027000032C3824CA
+:1074600000181E0000E2482501E35825AFAB0014C8
+:10747000AFA9001091DF007CA3BF00150E000063D0
+:1074800000000000362D0A0091A6003C30C4002008
+:1074900010800006260200083C11080096313AC010
+:1074A000262EFFFF3C010800A42E3AC08FBF00200B
+:1074B0008FB1001C8FB0001803E0000827BD002822
+:1074C0008F8A002C016A602B5580FFC424070001BD
+:1074D0000A000CCB30EF00FF9383001C3C028000BD
+:1074E00027BDFFD834480A0000805021AFBF0020DC
+:1074F00034460AC0010028211060000E344409807F
+:1075000091070030240B00058F89002030EC003FEC
+:10751000118B000B00003821AFA900103C0B800834
+:107520008D69006CAFAA00180E00012BAFA90014E2
+:10753000A380001C8FBF002003E0000827BD0028A7
+:107540008D1F00483C1808008F183AB48F99002806
+:107550003C027FFF8D0800443443FFFFAFA90010B9
+:107560003C0B80088D69006C03E3702403197821BB
+:1075700001CF682301A83821AFAA00180E00012B03
+:10758000AFA900140A000D20A380001C3C05800058
+:1075900034A60A0090C7003C3C06080094C63AD2C4
+:1075A0003C0208008C423ACC30E300200006240064
+:1075B0001060001E004438253C0880083505008016
+:1075C00090A3006800003021240800010000202161
+:1075D000240300013C0580008CAC01780580FFFE8F
+:1075E00000000000ACA80148A4A40144A4A30146E3
+:1075F0003C0308008C633AD43C188008370F0080A5
+:10760000ACA3014C3C19080093393AD13C0D100051
+:10761000A0B90152ACA70154A4A6015891EE004CA8
+:10762000A0AE016D03E00008ACAD01788CA80E1C83
+:107630003C0B08008D6B3AB494AA0E1694A90E1454
+:10764000016630213143FFFF0A000D483124FFFF5E
+:107650003C04800034830A009065003C30A2002086
+:107660001040001C0000000000003021000020211C
+:10767000000018213C0580008CA901780520FFFE40
+:1076800000000000ACA601483C0E08008DCE3AD4A4
+:10769000240DFF91240C00403C0B8008A4A301445E
+:1076A000356A0080A4A40146ACAE014CA0AD0152E5
+:1076B000ACAC0154A4A0015890A301099144004C22
+:1076C00090A601093C041000A0A6016D03E000088B
+:1076D000ACA401788C860E1894880E1294870E1034
+:1076E0003104FFFF0A000D7030E3FFFF3C0480000F
+:1076F00034830A009065003C30A200201040002630
+:1077000027BDFFF8240900010000382124080001EA
+:107710003C0680008CC401780480FFFE000000005D
+:1077200090CA01093C04080090843B113C1880FF7A
+:10773000A3AA00038FA300003085007F370FFFFF4F
+:1077400000661025AFA2000090D9010AA3A0000294
+:1077500000056E00A3B900018FAE0000240A3000BE
+:1077600027BD000801CF6024018D5825ACCB014C0A
+:10777000ACCA0154A4C00158ACC90148A4C7014413
+:107780002409FF80A4C801463C081000A0C901528A
+:1077900003E00008ACC801788C890E1894870E129B
+:1077A00094860E1030E8FFFF0A000D9730C7FFFFE8
+:1077B00027BDFFE8AFB000103C108000AFBF001441
+:1077C00036180A00970F00320E000A5031E43FFFCE
+:1077D0008E0E0100240DFF803C04200001C25821C0
+:1077E000016D6024000C4940316A007F012A402568
+:1077F000010438253C048008AE0708303486008038
+:1078000090C500682403000230A200FF104300046A
+:107810008F9F00208F990024AC9F0068AC99006472
+:107820008FBF00148FB0001003E0000827BD0018C0
+:107830003C0A0800254A359C3C09080025293638B1
+:107840003C08080025082A603C07080024E736FCAD
+:107850003C06080024C634243C05080024A5317CDD
+:107860003C04080024842D8C3C030800246334D895
+:107870003C020800244232743C010800AC2A3A90D1
+:107880003C010800AC293A8C3C010800AC283A883D
+:107890003C010800AC273A943C010800AC263AA40D
+:1078A0003C010800AC253A9C3C010800AC243A9805
+:1078B0003C010800AC233AA83C010800AC223AA0E5
+:0878C00003E0000800000000D5
+:0878C800800009408000090066
+:1078D000800801008008008080080000800E000001
+:1078E000800800808008000080000A8080000A0074
+:0878F0008000098080000900FE
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-rv2p-06-4.6.16.fw.ihex b/firmware/bnx2/bnx2-rv2p-06-4.6.16.fw.ihex
deleted file mode 100644
index 871de9e..0000000
--- a/firmware/bnx2/bnx2-rv2p-06-4.6.16.fw.ihex
+++ /dev/null
@@ -1,441 +0,0 @@
-:100000000000000000000CA00000005800000000EC
-:1000100000000000000000000000000000000000E0
-:1000200000000000000000000000000000000000D0
-:1000300000000DE000000CF80000000500000000CA
-:1000400000000000000000000000000000000000B0
-:080050000000000000000000A8
-:0800580000000010B18000025D
-:100060000000001F0103010000000008AC000001B7
-:1000700000000000050000000000000C2F800001BF
-:10008000000000002B000000000000002B8000009A
-:1000900000000010203F006300000010213F00031B
-:1000A0000000001020BF0032000000188000FFFD9B
-:1000B00000000010B1B8B00D0000000B2FDF0002EF
-:1000C0000000000003D80000000000002C380000F1
-:1000D0000000001091D400000000000806005555F3
-:1000E0000000001880000075000000188000010B5F
-:1000F00000000008020000020000000F42E0001CA7
-:100100000000001091840A11000000102C62000B06
-:10011000000000188000001E00000008020000021D
-:100120000000000F42E0001C0000001091840A183B
-:10013000000000082C8000B1000000082D0000091C
-:100140000000001091D40000000000082D8001077D
-:10015000000000188000006F0000001880000015EB
-:1001600000000008B1000001000000082C8000B071
-:10017000000000082D000008000000082D8000018C
-:1001800000000018800000690000000B2FDF000253
-:100190000000000C1F800002000000002C0700007F
-:1001A0000000001091DE00000000000005000000CB
-:1001B000000000188000FFDC0000000B2FDF0002B1
-:1001C0000000000C1F800000000000002C07000051
-:1001D0000000001091DE000000000000050000009B
-:1001E000000000188000FFD60000000C1F800002F5
-:1001F0000000000005000000000000188000FFD390
-:100200000000000C298000020000000C1F8000028A
-:10021000000000002ADF0000000000082A0000059E
-:100220000000000805005555000000188000FFCDB3
-:10023000000000080224003C000000180004000038
-:10024000000000188000001C000000188000001E44
-:100250000000001880000052000000188000009E7E
-:10026000000000188000009D0000001880000000C1
-:10027000000000188000000000000018800000004E
-:10028000000000188000000000000018800000003E
-:10029000000000188000000000000018800000002E
-:1002A000000000188000000000000018800000DF3F
-:1002B000000000188000000000000018800000000E
-:1002C0000000001880000015000000188000001BCE
-:1002D000000000188000000000000018800000B43A
-:1002E000000000188000002E00000018800000DFD1
-:1002F000000000188000010A00000018800000D5EE
-:10030000000000188000012E000000188000003B53
-:10031000000000188000000000000018800000713C
-:100320000000000C1F80000100000000050000001C
-:10033000000000188000FFAC0000001091D4000005
-:100340000000000C298000010000000C1F8000014B
-:10035000000000082A000002000000000500000064
-:10036000000000188000FFA60000001091D40000DB
-:100370000000000C298000010000000C1F8000011B
-:100380000000000029420000000000082A000002CE
-:100390000000000005000000000000188000FF9F22
-:1003A000000000188000FF9E00000010B1BCB00AE1
-:1003B0000000000B2FDF00020000000003D8000047
-:1003C000000000002C3C00000000001091D4000050
-:1003D00000000008060055550000001880000016B7
-:1003E00000000018800000AC000000102C6201BA70
-:1003F0000000001880000005000000082C8000B1FB
-:10040000000000082D0000090000001091D4000039
-:10041000000000082D8001070000000C298000006A
-:100420000000000C1F8000000000001091DE0000A2
-:10043000000000002ADF0000000000082A0000067B
-:100440000000000805005555000000188000FF89D5
-:100450000000001091D400000000000C2980000171
-:100460000000000C1F800001000000082A00000BA3
-:100470000000000005000000000000188000FF835D
-:1004800000000018000200000000000006820000CA
-:1004900000000010B18A000600000000860C140065
-:1004A00000000010B18C00040000000005000000F6
-:1004B000000000082A0000010000001091D4000094
-:1004C00000000018000D0000000000000502000000
-:1004D0000000001091DE000000000018000A00007B
-:1004E00000000010B1A0B0130000000B2FDF0002CD
-:1004F000000000002C200000000000082C800000FC
-:10050000000000082D0000000000001091D4000041
-:100510000000000806005555000000188000FFEE9E
-:10052000000000082D80011C00000010001F0000CA
-:100530000000001091DE00000000000F476000087E
-:100540000000000F060E0001000000000F58000020
-:10055000000000000A640000000000000AE500003E
-:10056000000000090B66FFFF000000000D610000A5
-:1005700000000018800000130000000F4760000812
-:100580000000000B2FDF0002000000082C8000009C
-:10059000000000082D0000000000001091D40000B1
-:1005A000000000082D80011C0000000F060E000155
-:1005B00000000010001F0000000000000F580000A5
-:1005C0000000001091DE0000000000000A6400003E
-:1005D000000000000AE50000000000090B66FFFFB4
-:1005E000000000000D610000000000000262000039
-:1005F0000000000B2FDF00020000000031040000AB
-:1006000000000000309A0000000000000C96180066
-:10061000000000090C99FFFF00000004CC99340091
-:1006200000000010B1963202000000080F800000A8
-:100630000000000C298000010000001000220002D0
-:100640000000000C295200010000000C295200009B
-:10065000000000080200000E000000080280001ADE
-:1006600000000010B1C40A020000000802000003EC
-:1006700000000008220000010000000C1F800001A3
-:10068000000000002ADF0000000000002A0008002F
-:100690000000000805005555000000188000FF3FCD
-:1006A0000000000B2FDF00020000001091D40000BA
-:1006B000000000082A000001000000002C200000BB
-:1006C000000000082C800000000000082D00000041
-:1006D000000000082D80011C0000001091D40000D3
-:1006E0000000001091DE0000000000082C800006D1
-:1006F000000000082D00000600000000308000000F
-:100700000000000031000000000000082D800006FD
-:100710000000000C298000010000000C1F80000177
-:100720000000001091DE0000000000002ADF000041
-:10073000000000082A000010000000000500000072
-:10074000000000188000FF2A0000001091A0B009EE
-:10075000000000082C8000B1000000082D000009F6
-:100760000000001091D40000000000082D80010757
-:10077000000000188000FFAB00000018800000108F
-:1007800000000008AC000001000000188000000B11
-:10079000000000000380B0000000000B2FDF00020B
-:1007A000000000002C0040000000001091D4000068
-:1007B0000000000806005555000000188000FF9A50
-:1007C00000000018800000300000001880000006C3
-:1007D0000000000B2FDF0002000000002C000E00C4
-:1007E000000000082A000007000000080500555519
-:1007F000000000188000FF140000000006820000C6
-:100800000000000C298000010000000C1F80000186
-:10081000000000100CE70007000000090562FFFF60
-:1008200000000010BA6C1405000000002ADF000070
-:100830000000000021000000000000082A00000560
-:100840000000001091D40000000000082C8000B0CF
-:10085000000000082D0000080000000C31620018A4
-:10086000000000082D800001000000188000FF8CAF
-:1008700000000018000D000000000010B1A0B00E34
-:100880000000000B2FDF00020000000003D8000072
-:10089000000000002C2000000000001091D4000097
-:1008A0000000001880000014000000102C620002FC
-:1008B000000000188000000B0000000B2FDF00027A
-:1008C000000000002C0700000000000C1F80000149
-:1008D0000000001091DE0000000000000500000094
-:1008E000000000188000FEF6000000082C8000B117
-:1008F000000000082D0000090000001091D4000045
-:10090000000000082D8001070000000C2980000174
-:100910000000000C1F8000010000001091DE0000AC
-:10092000000000002ADF0000000000082A00000A82
-:100930000000000005000000000000188000FEEB31
-:100940000000000005020000000000082C8000B03C
-:10095000000000082D000008000000082D80015054
-:10096000000000000000000000000010205F0000F8
-:10097000000000082C800000000000082D0000008E
-:10098000000000082D8001080000000000000000A9
-:100990000000001091DE000000000018000A0000B6
-:1009A0000000001091D40000000000080600AAAA70
-:1009B000000000188000FF5B0000000C298000018F
-:1009C0000000000C1F800001000000082A00000940
-:1009D000000000080500AAAA000000188000FED749
-:1009E0000000001091D400000000000806005555DA
-:1009F000000000188000FF530000001091A03C028E
-:100A000000000010B1E662070000000B2FDF0002BB
-:100A1000000000002C310000000000092CB1007F14
-:100A2000000000082CD90000000000082D00000084
-:100A3000000000082D80010D00000010B1A8000684
-:100A400000000010205F0000000000002C200000CB
-:100A5000000000002CA70000000000082D0000107E
-:100A6000000000082D800108000000188000FF4CE5
-:100A700000000010B1A6001000000010001F0000D0
-:100A80000000000F0F300007000000000A600000A7
-:100A9000000000000AE100000000000F4B620008A7
-:100AA000000000090B1600FF000000000D620000AE
-:100AB000000000090D1A00FF0000001007300003BD
-:100AC0000000000C0D1A00080000000C0B160008B6
-:100AD0000000000F4CE30018000000000C992C00EF
-:100AE00000000004CC993400000000080F800000D2
-:100AF0000000000C298000010000000033310000DC
-:100B00000000000822000016000000002ADF00009C
-:100B1000000000082A00000C00000010009F0000E8
-:100B2000000000000F2000000000000C1F800001EA
-:100B30000000000805005555000000188000FEABBD
-:100B40000000001091D40000000000080600AAAACE
-:100B5000000000188000FF270000000F4722000857
-:100B600000000009070E000F00000008070E000833
-:100B700000000008028000010000000702851C0040
-:100B800000000008828500010000000002854C0082
-:100B90000000000742851C0000000003C3AA5200A9
-:100BA0000000000003B10E00000000074B071C000E
-:100BB0000000000F0F3000070000000F0A9600032E
-:100BC000000000000A955C00000000004A005A0086
-:100BD000000000000C960A00000000090C99FFFFBD
-:100BE000000000080D00FFFF00000010B196320267
-:100BF000000000080F80000500000010B1A80008E8
-:100C000000000010205F00000000000B2FDF00023A
-:100C1000000000002C200000000000002CA70000B5
-:100C2000000000082D000010000000082D800108C1
-:100C3000000000188000FF130000000C2980000154
-:100C400000000010001F00000000000C1F800001C9
-:100C5000000000002ADF0000000000082A00000D4C
-:100C6000000000080500AAAA000000188000FE8508
-:100C70000000001091D40000000000080600555547
-:100C8000000000188000FF010000000C2980000116
-:100C90000000000C1F800001000000082A0000076F
-:100CA0000000000805005555000000188000FE7D7A
-:100CB00000000008030500040000000683040C0087
-:100CC00000000008028502000000000086050C00FC
-:100CD00000000001860C0E00000000080204000461
-:100CE00000000000020418000000000083871800C4
-:080CF0000000001800020000E2
-:080CF80000000010B1800004AF
-:100D00000000001F0103010000000008050000FFB3
-:100D10000000001800020000000000002A0000008F
-:100D200000000010B1D400000000000C2980000178
-:100D30000000000802540008000000180004000031
-:100D40000000001880000010000000188000001152
-:100D5000000000188000003A000000188000010424
-:100D6000000000188000010300000018800001024C
-:100D70000000001880000102000000188000000040
-:100D8000000000188000011400000018800000FE20
-:100D9000000000188000000C0000001880000118FE
-:100DA000000000188000016A000000188000006741
-:100DB00000000018800000DA00000018800000E742
-:100DC000000000002A000000000000188000FFEB77
-:100DD000000000002A0000000000000C2980000034
-:100DE0000000001020530000000000188000FFE702
-:100DF000000000002A000000000000188000FFE54D
-:100E000000000018000200000000000005020000C1
-:100E1000000000109196342100000010205F0000B7
-:100E2000000000002C1E0000000000082C800006BE
-:100E3000000000082D000006000000082D800102BF
-:100E400000000000000000000000001091DE000023
-:100E5000000000000D61000000000018000A000002
-:100E600000000000050200000000001091963416FA
-:100E700000000010205F00000000000009D8000002
-:100E8000000000002C1E0000000000082C8000B2B2
-:100E9000000000082D00000A000000082D8001025B
-:100EA00000000000000000000000001091DE0000C3
-:100EB000000000000D620000000000002C13000084
-:100EC00000000018000A00000000000005020000F9
-:100ED000000000109196340900000010205F00000F
-:100EE000000000002C1E0000000000082C800006FE
-:100EF000000000082D00006A000000082D8001029B
-:100F000000000000000000000000001091DE000062
-:100F1000000000000D7A000000000018000A000028
-:100F20000000001091DE000000000010001F000013
-:100F3000000000002F80AA00000000002A0000002E
-:100F4000000000000D6100000000000003620000CE
-:100F5000000000002C4000000000000002638C0034
-:100F600000000000264600000000000802040012F5
-:100F700000000010B9060827000000000F5800000C
-:100F8000000000000A640000000000000AE5000004
-:100F9000000000090B66FFFF000000000C000000CD
-:100FA000000000000B800000000000080CC60012CA
-:100FB000000000188000FFCB000000080F80000335
-:100FC000000000000000000000000010009F000072
-:100FD00000000008271100120000000066900000C9
-:100FE00000000008A31B001200000010B1980003CD
-:100FF00000000010001F0000000000080F80000427
-:101000000000000822000003000000082C80000CF3
-:10101000000000082D00000C00000010009F0000E0
-:1010200000000000259600000000000C2980000050
-:101030000000000006660000000000008661180045
-:10104000000000090260000F0000000F020400020F
-:1010500000000010B60C08030000000C1FBF0000C9
-:101060000000000C33660010000000003214000085
-:1010700000000000329500000000000573662C009F
-:101080000000000031E32E00000000082D80001059
-:1010900000000010205300000000001091DE00004E
-:1010A000000000188000FF900000000023000000F6
-:1010B0000000000925E6FFFF000000082200000BE9
-:1010C0000000000C695200000000000C29800000A4
-:1010D0000000001020530000000000188000FF896D
-:1010E0000000001091DE000000000010001F000052
-:1010F000000000002F80AA00000000002A0000006D
-:10110000000000002C400000000000082C8000407F
-:10111000000000082D000020000000082D80011CA8
-:1011200000000000000000000000001091DE000040
-:101130000000000F42EA001000000010004F000401
-:1011400000000010B746920000000008024900129B
-:1011500000000010B5840A00000000000D610000CE
-:1011600000000010BA66345A00000000036200005C
-:1011700000000010B8630C5800000008830500123E
-:1011800000000010004F00020000000003490000B2
-:101190000000000183068C000000000083C60C00E4
-:1011A00000000010B1870010000000000B6E00006E
-:1011B000000000188000FF6B0000000106691400A9
-:1011C00000000010918C000200000008B4E900014A
-:1011D00000000010B1E92C4C0000000086692C00D2
-:1011E00000000000020000000000000902EAFFFF0A
-:1011F00000000010000C00020000000002040A00C1
-:101200000000000F460C00010000000F02850001E5
-:1012100000000010918C01FC00000010B7040E4388
-:10122000000000002C400000000000000F40000003
-:10123000000000000D610000000000000A640000D2
-:10124000000000000AE50000000000090B66FFFF37
-:10125000000000000C000000000000000B800000F7
-:10126000000000080C860012000000080F80000338
-:101270000000000C2952000000000010009F000038
-:101280000000000827110012000000006690000016
-:1012900000000000264600000000000023060000B9
-:1012A00000000010B198000500000010001F0000B1
-:1012B000000000080F800004000000000000000093
-:1012C00000000010001F00000000000032140000A9
-:1012D00000000000329500000000000031E32E0005
-:1012E0000000000573662C00000000002596000039
-:1012F00000000010B18700160000000C29800000DB
-:101300000000000F0F6B0007000000000D690000D7
-:10131000000000000A6C0000000000000AED000060
-:10132000000000000B6E0000000000000B800000B9
-:10133000000000000C870000000000080F80000380
-:1013400000000010205300000000000C6952000152
-:1013500000000010001F00000000000022C58C00EB
-:1013600000000000231B0000000000002711000007
-:10137000000000002690000000000010B8170E03C7
-:101380000000000C29800000000000188000FFF61B
-:1013900000000010B1980002000000080F80000457
-:1013A000000000082200001A000000082C80000C39
-:1013B000000000082D00000C000000082D80001027
-:1013C00000000010001F0000000000000D6E000073
-:1013D00000000003E7CF34000000000C298000006B
-:1013E0000000001091DE000000000010B18700072F
-:1013F00000000000361400000000000036950000D8
-:101400000000000037160000000000082C8000508B
-:10141000000000082D000030000000082D80000CA6
-:101420000000001020530000000000188000FF1F83
-:10143000000000002646000000000000230000001D
-:101440000000000925E6FFFF000000000B6E000011
-:1014500000000003E7CF2C00000000082200001B62
-:101460000000000C695200000000000C2980000000
-:101470000000001020530000000000188000FF153D
-:10148000000000002FD50000000000002A0000002E
-:1014900000000010003F000B000000000666000086
-:1014A000000000008661180000000009026000F0E2
-:1014B00000000010B70C08070000000C7366001055
-:1014C000000000082C800018000000082D00001803
-:1014D000000000082D8000020000000C5FBF00002B
-:1014E0000000001091DE0000000000188000FF07DF
-:1014F000000000002FD50000000000002A000000BE
-:10150000000000002C4000000000000C29800000BA
-:101510000000001091DE0000000000082C80001A7E
-:10152000000000082D00001A000000003300000039
-:10153000000000082D800002000000003180000043
-:101540000000001091DE0000000000082C80000C5C
-:10155000000000082D00000C000000082D80000491
-:1015600000000010205300000000001091DE000079
-:10157000000000188000FEF6000000188000FEF554
-:10158000000000002A00000000000010001F000002
-:10159000000000000F008000000000080F8000071E
-:1015A0000000001880000014000000000502000088
-:1015B000000000082200000900000000286D000063
-:1015C00000000000290000000000000F6568001006
-:1015D00000000003F66C940000000010B972A00433
-:1015E0000000000C73E700190000000C2142000409
-:1015F000000000003BF600000000000C2980000005
-:101600000000001020530000000000082200000825
-:101610000000000C6142000400000018000A0000F5
-:10162000000000002A00000000000010001F000061
-:101630000000000F0F470007000000080F8000089F
-:101640000000000C29800000000000102053000062
-:10165000000000188000FEDA0000001091DE00009B
-:10166000000000002FD5000000000010001F000047
-:101670000000000033510000000000002A000000BC
-:1016800000000010B1C600230000000F0F5000073B
-:10169000000000000A600000000000000AE10000F5
-:1016A0000000000F4B620008000000090B1600FF4D
-:1016B0000000000F4C620010000000000D620000EE
-:1016C000000000090D1A00FF000000100750000381
-:1016D0000000000C0D1A00080000000C0B1600089A
-:1016E000000000000CC60000000000000B8000009D
-:1016F0000000000006980000000000080F800003B2
-:101700000000001006C200040000000C29000002C6
-:1017100000000010264200020000000C29520003C5
-:10172000000000082200000100000010009F0000DF
-:1017300000000000231B00000000000027111A0019
-:1017400000000000669000000000000C295200001C
-:1017500000000010B19732090000000C2980000041
-:101760000000000006980000000000102053000058
-:101770000000000C295200030000000022C58C006C
-:1017800000000010001F0000000000080F80000390
-:10179000000000188000FFF300000010B1C8001323
-:1017A00000000010B1C600030000000C29800000FA
-:1017B00000000010205300000000000C295200001F
-:1017C0000000000C295200030000001006C20002B5
-:1017D0000000000C295200020000000022C58C000D
-:1017E00000000000276500000000000026E4000063
-:1017F000000000082200001600000010B1C600031F
-:10180000000000002348000000000010B180000527
-:1018100000000000234800000000000C29800000A8
-:101820000000000F0F500007000000188000001299
-:1018300000000008220000160000000C29800000B3
-:10184000000000003014000000000000309500008F
-:101850000000001007500003000000090B1600FFF5
-:10186000000000090D1A00FF0000000F31160008EB
-:10187000000000003162340000000003F16230001B
-:1018800000000010205F0000000000002C5100004C
-:10189000000000092CD1007F000000082CD90000B6
-:1018A000000000082D000000000000082D80000C42
-:1018B00000000000000000000000001091DE0000A9
-:1018C0000000001005C2000300000000330000000B
-:1018D000000000080F8000070000001020530000E7
-:1018E00000000010009F0000000000188000FE872C
-:1018F000000000002FD50000000000002A000000BA
-:101900000000000F0F50000700000010B1C6002DAE
-:101910000000000F4742000800000009070E000FFA
-:1019200000000008070E000800000010001F000063
-:1019300000000008090000010000000709121C0057
-:1019400000000003CBCA9200000000000B97A20029
-:101950000000000742171C00000000000B040000FC
-:101960000000000F0A840003000000000A959C009C
-:10197000000000004A009A000000000882120001E6
-:10198000000000010C170800000000000C978C00FC
-:101990000000000002180000000000080D00FFFF1A
-:1019A000000000080F8000060000000C2900000065
-:1019B0000000001006C200040000000C29520002C2
-:1019C00000000010264200020000000C2952000313
-:1019D000000000082200000100000010009F00002D
-:1019E00000000010B197320C00000000231B000023
-:1019F00000000000271108000000000066900000B1
-:101A00000000000C29800000000000000218000007
-:101A100000000010205300000000000C29520003B9
-:101A20000000000022C5360000000010001F00006A
-:101A3000000000080F800006000000188000FFF47E
-:101A400000000000231B0000000000002711080018
-:101A5000000000006690000000000010B1C8000BFC
-:101A60000000000C2980000000000010205300003E
-:101A70000000000C295200000000000C2952000355
-:101A80000000001006C200020000000C29520002F3
-:101A90000000000022C58C00000000002765000047
-:101AA0000000000026E400000000000023480000C1
-:101AB00000000008220000170000000C2980000030
-:101AC00000000010001F0000000000102053000064
-:081AD000000000188000FE4A2E
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-rv2p-06-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-rv2p-06-5.0.0.j3.fw.ihex
new file mode 100644
index 0000000..52c4963
--- /dev/null
+++ b/firmware/bnx2/bnx2-rv2p-06-5.0.0.j3.fw.ihex
@@ -0,0 +1,424 @@
+:100000000000000000000C900000005800000009F3
+:1000100000000000000000000000000000000000E0
+:1000200000000000000000000000000000000000D0
+:1000300000000CE000000CE80000000500000000DB
+:1000400000000000000000000000000000000000B0
+:080050000000000000000000A8
+:0800580000000010B180000659
+:100060000000001F01030300000000080500FFFF5F
+:10007000000000180002000000000008050000FF5A
+:10008000000000180002000000000008AC000001A1
+:1000900000000000050000000000000C2F8000019F
+:1000A000000000002B000000000000002B8000007A
+:1000B0000000001091E0000200000008AC00000108
+:1000C00000000010203F004D00000010213F000301
+:1000D0000000001020BF001C000000188000FFFD81
+:1000E00000000008B1000001000000082C8000B0F2
+:1000F000000000082D000008000000082D8000010D
+:10010000000000188000006C0000000B2FDF0002D0
+:100110000000000C1F800002000000002C070000FF
+:100120000000001091DE0000000000080500555599
+:10013000000000188000FFF00000000B2FDF00021D
+:100140000000000C1F800000000000002C070000D1
+:100150000000001091DE0000000000080500555569
+:10016000000000188000FFEA0000000C1F80000261
+:100170000000000805005555000000188000FFE74A
+:100180000000000C298000020000000C1F8000020B
+:10019000000000002ADF0000000000082A0000051F
+:1001A0000000000805005555000000188000FFE120
+:1001B000000000080224002C0000001800040000C9
+:1001C000000000188000001C000000188000001EC5
+:1001D000000000188000006500000018800000B0DA
+:1001E00000000018800000AF000000188000000030
+:1001F00000000018800000000000001880000000CF
+:1002000000000018800000000000001880000000BE
+:1002100000000018800000000000001880000000AE
+:10022000000000188000000000000018800000F6A8
+:10023000000000188000000000000018800000008E
+:100240000000001880000015000000188000001B4E
+:10025000000000188000000000000018800000C6A8
+:10026000000000188000002F00000018800000F639
+:10027000000000188000012100000018800000EC40
+:100280000000001880000145000000188000004EAA
+:1002900000000018800000000000001880000083AB
+:1002A0000000000C1F80000100000000050000009D
+:1002B000000000188000FFC00000001091D4000072
+:1002C0000000000C298000010000000C1F800001CC
+:1002D000000000082A0000020000000005000000E5
+:1002E000000000188000FFBA0000001091D4000048
+:1002F0000000000C298000010000000C1F8000019C
+:100300000000000029420000000000082A0000024E
+:100310000000000005000000000000188000FFB38E
+:10032000000000188000FFB200000010B1BCB00A4D
+:100330000000000B2FDF00020000000003D80000C7
+:10034000000000002C3C00000000001091D40000D0
+:100350000000000806005555000000188000001736
+:1003600000000018800000BF000000102C6201BADD
+:100370000000001880000006000000082C8000B17A
+:10038000000000082D0000090000001091D40000BA
+:10039000000000082D8001070000001880000024E4
+:1003A0000000000C298000000000000C1F800000ED
+:1003B0000000001091DE0000000000002ADF0000B5
+:1003C000000000082A00000600000008050055553E
+:1003D000000000188000FF9C0000001091D4000075
+:1003E0000000000C298000010000000C1F800001AB
+:1003F000000000082A00000B0000000005000000BB
+:10040000000000188000FF960000001800020000A5
+:10041000000000000682000000000010B18A000801
+:1004200000000010B18C14070000000B050AFFFF4C
+:1004300000000010B18A000300000000860A1800C6
+:1004400000000010918C0000000000082A0000014C
+:100450000000001091D4000000000018000D000002
+:1004600000000000050200000000001091DE000006
+:1004700000000018000A00000000000006820000D2
+:100480000000001091DE000000000010BEE1000539
+:10049000000000188000FF7D0000000105611400CD
+:1004A00000000010918A000200000008B0E1000185
+:1004B00000000018000D000000000000068200008F
+:1004C0000000001091DE000000000010BEE20005F8
+:1004D000000000188000FF75000000010562140094
+:1004E00000000010918A000200000008B1620001C3
+:1004F00000000018000D000000000010B1A0B013B3
+:100500000000000B2FDF0002000000002C20000084
+:10051000000000082C800000000000082D000000F2
+:100520000000001091D4000000000008060055559E
+:10053000000000188000FFDC000000082D80011C76
+:1005400000000010001F0000000000188000FFE6FF
+:100550000000000F476000080000000F060E0001B9
+:10056000000000000F580000000000000A640000B6
+:10057000000000000AE50000000000090B66FFFF14
+:10058000000000000D610000000000188000001352
+:100590000000000F476000080000000B2FDF000282
+:1005A000000000082C800000000000082D00000062
+:1005B0000000001091D40000000000082D80011CF4
+:1005C0000000000F060E000100000010001F0000D8
+:1005D000000000000F580000000000188000FFD449
+:1005E000000000000A640000000000000AE50000AE
+:1005F000000000090B66FFFF000000000D61000015
+:1006000000000000026200000000000B2FDF00026B
+:10061000000000003104000000000000309A0000DB
+:10062000000000000C961800000000090C99FFFF64
+:1006300000000004CC99340000000010B196320292
+:10064000000000080F8000000000000C298000015D
+:100650000000000C295200010000000C295200008B
+:10066000000000080200000E000000080280001ACE
+:1006700000000010B1C40A020000000802000003DC
+:1006800000000008220000010000000C1F80000193
+:10069000000000002ADF0000000000002A0008001F
+:1006A0000000000805005555000000188000FF41BB
+:1006B0000000000B2FDF00020000001091D40000AA
+:1006C000000000082A000001000000002C200000AB
+:1006D0000000001091D40000000000082C800000F1
+:1006E000000000082D000000000000082D80011C03
+:1006F000000000188000FFAE000000082C800006FB
+:10070000000000082D0000060000000030800000FE
+:100710000000000031000000000000082D800006ED
+:100720000000000C298000010000000C1F80000167
+:100730000000001091DE0000000000002ADF000031
+:10074000000000082A000010000000000500000062
+:10075000000000188000FF2C0000001091A0B009DC
+:10076000000000082C8000B1000000082D000009E6
+:100770000000001091D40000000000082D80010747
+:10078000000000188000FFA7000000188000001083
+:1007900000000008AC000001000000188000000B01
+:1007A000000000000380B0000000000B2FDF0002FB
+:1007B000000000002C0040000000001091D4000058
+:1007C0000000000806005555000000188000FF8951
+:1007D00000000018800000310000001880000006B2
+:1007E0000000000B2FDF0002000000002C000E00B4
+:1007F000000000082A000007000000080500555509
+:10080000000000188000FF160000000006820000B3
+:100810000000000C298000010000000C1F80000176
+:10082000000000100CE70007000000090562FFFF50
+:1008300000000010BA6C1405000000002ADF000060
+:100840000000000021000000000000082A00000550
+:100850000000001091D40000000000082C8000B0BF
+:10086000000000082D0000080000000C3162001894
+:10087000000000082D800001000000188000FF7DAE
+:1008800000000018000D000000000010B1A0B00E24
+:100890000000000B2FDF00020000000003D8000062
+:1008A000000000002C2000000000001091D4000087
+:1008B0000000001880000015000000102C620002EB
+:1008C000000000188000000C0000000B2FDF000269
+:1008D000000000002C0700000000000C1F80000139
+:1008E0000000001091DE0000000000080500FFFF7E
+:1008F000000000188000FEF8000000082C8000B105
+:10090000000000082D0000090000001091D4000034
+:10091000000000082D800107000000188000FF740F
+:100920000000000C298000010000000C1F80000165
+:100930000000001091DE0000000000002ADF00002F
+:10094000000000082A00000A000000000500000066
+:10095000000000188000FEEC00000000068200008D
+:10096000000000082C8000B0000000082D000008E6
+:10097000000000082D800150000000000000000071
+:100980000000001091DE0000000000082C80000034
+:10099000000000082D000000000000082D80010567
+:1009A00000000010BEE20005000000188000FEDA22
+:1009B000000000010562140000000010918A00028E
+:1009C00000000008B16200010000001091DE00008C
+:1009D00000000018000D00000000001091D400007D
+:1009E000000000080600AAAA000000188000FF45C9
+:1009F0000000000C298000010000000C1F80000195
+:100A0000000000082A000009000000080500AAAA4A
+:100A1000000000188000FED40000001091D40000F7
+:100A20000000000806005555000000188000FF3D3A
+:100A30000000001091A03C0200000010B1E6620727
+:100A40000000000B2FDF0002000000002C3100002E
+:100A5000000000092CB1007F000000082CD9000024
+:100A6000000000082D000000000000082D80010D8E
+:100A700000000010B1A8000600000010205F000078
+:100A8000000000002C200000000000002CA7000047
+:100A9000000000082D000010000000082D80010853
+:100AA000000000188000FF3800000010B1A6001000
+:100AB00000000010001F00000000000F0F300007B2
+:100AC000000000000A600000000000000AE10000D1
+:100AD0000000000F4B620008000000090B1600FF29
+:100AE000000000000D620000000000090D1A00FF68
+:100AF00000000010073000030000000C0D1A000871
+:100B00000000000C0B1600080000000F4CE300185A
+:100B1000000000000C992C0000000004CC99340067
+:100B2000000000080F8000000000000C2980000178
+:100B30000000000033310000000000082200001611
+:100B4000000000002ADF0000000000082A00000C5E
+:100B500000000010009F0000000000000F200000B7
+:100B60000000000C1F800001000000080500555522
+:100B7000000000188000FEA80000001091D40000C2
+:100B8000000000080600AAAA000000188000FF115B
+:100B90000000000F4722000800000009070E000FA8
+:100BA00000000008070E0008000000080280000195
+:100BB0000000000702851C0000000008828500017B
+:100BC0000000000002854C000000000742851C0068
+:100BD00000000003C3AA52000000000003B10E0091
+:100BE000000000074B071C000000000F0F3000073B
+:100BF0000000000F0A960003000000000A955C0048
+:100C0000000000004A005A00000000000C960A0094
+:100C1000000000090C99FFFF000000080D00FFFF15
+:100C200000000010B1963202000000080F8000059D
+:100C300000000010B1A8000800000010205F0000B4
+:100C40000000000B2FDF0002000000002C2000003D
+:100C5000000000002CA70000000000082D0000107C
+:100C6000000000082D800108000000188000FEFF31
+:100C70000000000C2980000100000010001F00008F
+:100C80000000000C1F800001000000002ADF0000AF
+:100C9000000000082A00000D000000080500AAAAB4
+:100CA000000000188000FE820000001091D40000B7
+:100CB0000000000806005555000000188000FEEBFB
+:100CC0000000000C298000010000000C1F800001C2
+:100CD000000000082A000007000000080500555524
+:080CE000000000188000FE7AFC
+:080CE80000000010B1800004BF
+:100CF0000000001F0103030000000008050000FFC2
+:100D00000000001800020000000000002A0000009F
+:100D100000000010B1D400000000001091DE0000BF
+:100D2000000000102053000000000010001F000011
+:100D3000000000002F80AA000000000C29800001A4
+:100D4000000000080254000D000000002C400000CC
+:100D500000000018000400000000001880000010CF
+:100D60000000001880000011000000188000003909
+:100D700000000018800000DF00000018800000DE86
+:100D800000000018800000DD00000018800000DD79
+:100D9000000000188000000000000018800000F52E
+:100DA00000000018800000D9000000188000000B2F
+:100DB00000000018800000F90000001880000147C2
+:100DC000000000188000005900000018800000C4D6
+:100DD00000000018800000C5000000002A0000008C
+:100DE000000000188000FFE6000000002A0000005C
+:100DF0000000000C29800000000000188000FFE3C4
+:100E0000000000002A000000000000188000FFE140
+:100E100000000018000200000000000005020000B1
+:100E2000000000109196342100000010205F0000A7
+:100E3000000000002C1E0000000000082C800006AE
+:100E4000000000082D000006000000082D800102AF
+:100E500000000000000000000000001091DE000013
+:100E6000000000000D61000000000018000A0000F2
+:100E700000000000050200000000001091963416EA
+:100E800000000010205F00000000000009D80000F2
+:100E9000000000002C1E0000000000082C8000B2A2
+:100EA000000000082D00000A000000082D8001024B
+:100EB00000000000000000000000001091DE0000B3
+:100EC000000000000D620000000000002C13000074
+:100ED00000000018000A00000000000005020000E9
+:100EE000000000109196340900000010205F0000FF
+:100EF000000000002C1E0000000000082C800006EE
+:100F0000000000082D00006A000000082D8001028A
+:100F100000000000000000000000001091DE000052
+:100F2000000000000D7A000000000018000A000018
+:100F3000000000002A000000000000000D61000019
+:100F4000000000000362000000000010234200A324
+:100F50000000000002638C00000000002646000034
+:100F6000000000080204001200000010B906081E6C
+:100F7000000000000F580000000000000A6400009C
+:100F8000000000000AE50000000000090B66FFFFFA
+:100F9000000000000C000000000000000B800000BA
+:100FA000000000080CC60012000000188000FFCEF0
+:100FB000000000080F800003000000000000000097
+:100FC00000000010009F0000000000082711001220
+:100FD000000000006690000000000008A31B001243
+:100FE00000000010B198000300000010001F000076
+:100FF000000000080F800004000000082200000329
+:10100000000000082C80000C000000082D00000CDF
+:1010100000000010009F0000000000002596000066
+:101020000000000C298000000000000032140000C5
+:1010300000000000329500000000000573662C00DF
+:101040000000000031E32E00000000082D80001099
+:10105000000000188000FF9800000000230000003E
+:101060000000000925E6FFFF000000082200000B39
+:101070000000000C695200000000000C29800000F4
+:10108000000000188000FF92000000002A0000000D
+:10109000000000082C800040000000082D00002007
+:1010A000000000082D80011C00000000000000006E
+:1010B0000000001091DE00000000000F42EA001066
+:1010C00000000010004F000400000010B74692001E
+:1010D000000000080249001200000010B5840A0058
+:1010E000000000000D61000000000010BA663457D7
+:1010F000000000088305001200000010004F0002ED
+:1011000000000000034900000000000183068C007D
+:101110000000000083C60C0000000010B187001121
+:10112000000000000B6E000000000010BEE900058A
+:10113000000000188000FF7900000001056914001C
+:1011400000000010918A000200000008B4E90001CC
+:1011500000000010B1E92C4A0000000086692C0054
+:1011600000000000020000000000000902EAFFFF8A
+:1011700000000010000C00020000000002040A0041
+:101180000000000F460C00010000000F0285000166
+:1011900000000010918C01FC00000010B7040E410B
+:1011A000000000000F400000000000000D61000082
+:1011B000000000000A640000000000000AE50000D2
+:1011C000000000090B66FFFF000000000C0000009B
+:1011D000000000000B800000000000080C860012D8
+:1011E000000000080F8000030000000C29520000DE
+:1011F00000000010009F00000000000827110012EE
+:10120000000000006690000000000000264600007C
+:10121000000000002306000000000010B198000547
+:1012200000000010001F0000000000080F800004F4
+:10123000000000000000000000000010001F00007F
+:101240000000000032140000000000003295000091
+:101250000000000031E32E000000000573662C0042
+:10126000000000002596000000000010B187001665
+:101270000000000C298000000000000F0F6B000729
+:10128000000000000D690000000000000A6C000072
+:10129000000000000AED0000000000000B6E0000DE
+:1012A000000000000B800000000000000C87000020
+:1012B000000000080F800003000000102053000011
+:1012C0000000000C6952000100000010001F000027
+:1012D0000000000022C58C0000000000231B00005D
+:1012E0000000000027110000000000002690000010
+:1012F00000000010B8170E030000000C2980000049
+:10130000000000188000FFF600000010B1980002F5
+:10131000000000080F800004000000082200001AEE
+:10132000000000082C80000C000000082D00000CBC
+:10133000000000082D80001000000010001F0000B9
+:10134000000000000D6E000000000003E7CF340035
+:101350000000000C298000000000001091DE000059
+:1013600000000010B18700070000000036140000E4
+:101370000000000036950000000000003716000055
+:10138000000000082C800050000000082D000030F4
+:10139000000000082D80000C000000188000FF2FC6
+:1013A00000000000264600000000000023000000AE
+:1013B0000000000925E6FFFF000000000B6E0000A2
+:1013C00000000003E7CF2C00000000082200001BF3
+:1013D0000000000C695200000000000C2980000091
+:1013E000000000188000FF26000000002A00000016
+:1013F000000000188000FF24000000002A00000008
+:101400000000000C298000000000001091DE0000A8
+:10141000000000082C80001A000000082D00001AAF
+:101420000000000573660000000000082D80000227
+:1014300000000000318000000000001091DE00007C
+:10144000000000082C80000C000000082D00000C9B
+:10145000000000082D800004000000188000FF1725
+:101460000000001800020000000000188000FF15B6
+:10147000000000002A00000000000010001F000013
+:10148000000000000F008000000000080F8000072F
+:10149000000000188000001A00000000280A000068
+:1014A0000000000005020000000000082200000902
+:1014B00000000000290000000000000F6568001017
+:1014C00000000003F66C940000000010B972A00444
+:1014D0000000000C73E700190000000C214200041A
+:1014E000000000003CF800000000000C2980000013
+:1014F0000000001020530000000000082200000837
+:101500000000000C6142000400000018000A000006
+:1015100000000000050200000000000C6142000015
+:1015200000000010014200030000000C33E7001D22
+:101530000000000C6142000200000018000A0000D8
+:10154000000000002A00000000000010001F000042
+:101550000000000F0F470007000000080F80000880
+:101560000000000C2980000000000010009F000017
+:10157000000000188000FEF400000000335100005D
+:10158000000000002A00000000000010B1C6002387
+:101590000000000F0F500007000000000A6000006C
+:1015A000000000000AE100000000000F4B6200088C
+:1015B000000000090B1600FF0000000F4C62001035
+:1015C000000000000D620000000000090D1A00FF7D
+:1015D00000000010075000030000000C0D1A000866
+:1015E0000000000C0B160008000000000CC60000F4
+:1015F000000000000B8000000000000006980000C2
+:10160000000000080F8000030000001006C2000464
+:101610000000000C29000002000000102642000219
+:101620000000000C29520003000000082200000105
+:1016300000000010009F000000000000231B0000BD
+:101640000000000027111A00000000006690000052
+:101650000000000C2952000000000010B197320970
+:101660000000000C29800000000000000698000027
+:1016700000000010205300000000000C295200035D
+:101680000000000022C58C0000000010001F0000B8
+:10169000000000080F800003000000188000FFF326
+:1016A00000000010B1C8001300000010B1C6000314
+:1016B0000000000C298000000000001020530000F2
+:1016C0000000000C295200000000000C2952000309
+:1016D0000000001006C200020000000C29520002A7
+:1016E0000000000022C58C000000000027650000FB
+:1016F0000000000026E400000000000822000016A0
+:1017000000000010B1C600030000000023480000E4
+:1017100000000010B1800005000000002348000018
+:101720000000000C298000000000000F0F5000078F
+:1017300000000018800000120000000822000016BF
+:101740000000000C298000000000000030140000A0
+:10175000000000003095000000000010075000035A
+:10176000000000090B1600FF000000090D1A00FF21
+:101770000000000F31160008000000003162340044
+:1017800000000003F162300000000010205F000044
+:10179000000000002C510000000000092CD1007F47
+:1017A000000000082CD90000000000082D000000F7
+:1017B000000000082D80000C000000000000000068
+:1017C0000000001091DE00000000001005C20004BF
+:1017D000000000080F800007000000003300000038
+:1017E00000000010009F0000000000188000FEA50F
+:1017F000000000002A0000000000000F0F5000074A
+:1018000000000010B1C6002D0000000F4742000884
+:1018100000000009070E000F00000008070E000876
+:1018200000000010001F0000000000080900000177
+:101830000000000709121C0000000003CBCA920040
+:10184000000000000B97A2000000000742171C00D8
+:10185000000000000B0400000000000F0A840003D9
+:10186000000000000A959C00000000004A009A0059
+:101870000000000882120001000000010C1708009F
+:10188000000000000C978C0000000000021800000F
+:10189000000000080D00FFFF000000080F80000698
+:1018A0000000000C290000000000001006C2000427
+:1018B0000000000C29520002000000102642000225
+:1018C0000000000C29520003000000082200000163
+:1018D00000000010009F000000000010B197320CC3
+:1018E00000000000231B000000000000271108007A
+:1018F00000000000669000000000000C298000003D
+:10190000000000000218000000000010205300003A
+:101910000000000C295200030000000022C5360020
+:1019200000000010001F0000000000080F800006EB
+:10193000000000188000FFF400000000231B0000DE
+:101940000000000027110800000000006690000061
+:1019500000000010B1C8000B0000000C298000003E
+:1019600000000010205300000000000C295200006D
+:101970000000000C295200030000001006C2000203
+:101980000000000C295200020000000022C58C005B
+:1019900000000000276500000000000026E40000B1
+:1019A000000000002348000000000008220000178B
+:1019B0000000000C2980000000000010001F000043
+:0819C000000000188000FE6A1F
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-rv2p-09-4.6.15.fw.ihex b/firmware/bnx2/bnx2-rv2p-09-4.6.15.fw.ihex
deleted file mode 100644
index 63995bb..0000000
--- a/firmware/bnx2/bnx2-rv2p-09-4.6.15.fw.ihex
+++ /dev/null
@@ -1,490 +0,0 @@
-:100000000000000000000D88000000580000000003
-:1000100000000000000000000000000000000000E0
-:1000200000000000000000000000000000000000D0
-:100030000000101800000DE00000000500000000A6
-:1000400000000000000000000000000000000000B0
-:080050000000000000000000A8
-:0800580000000010B18000025D
-:100060000000001F0303010000000008AC000001B5
-:1000700000000000050000000000000C2F800001BF
-:10008000000000002B000000000000002B8000009A
-:1000900000000010203F006C00000010213F000312
-:1000A0000000001020BF003B000000188000FFFD92
-:1000B00000000010B1B8B0150000000B2FDF0002E7
-:1000C0000000000003D80000000000002C380000F1
-:1000D000000000082C800000000000082D00000037
-:1000E0000000001091D400000000000806005555E3
-:1000F000000000188000008F000000082D80011C07
-:1001000000000008020000010000001091DE000065
-:100110000000000F42E0001C0000001091840A174C
-:1001200000000010086600160000000C2980000284
-:100130000000000C1F800002000000002ADF000009
-:10014000000000082A00000F0000000805005555B7
-:10015000000000188000FFE8000000080200000115
-:100160000000000F42E0001C0000001091840A19FA
-:10017000000000082C800006000000082D0000068A
-:100180000000001091D40000000000082D8001063E
-:1001900000000018800000830000001008660013B3
-:1001A000000000188000FFF100000008B10000010D
-:1001B000000000082C80010C000000082D00000841
-:1001C000000000082D800001000000188000007C65
-:1001D0000000000B2FDF00020000000C1F80000257
-:1001E000000000002C0700000000001091DE00005D
-:1001F0000000000005000000000000188000FFD390
-:100200000000000B2FDF00020000000C1F80000028
-:10021000000000002C0700000000001091DE00002C
-:100220000000000005000000000000188000FFCD65
-:100230000000000C1F80000200000000050000000C
-:10024000000000188000FFCA0000000C2980000296
-:100250000000000C1F800002000000002ADF0000E8
-:10026000000000082A0000050000000805005555A0
-:10027000000000188000FFC40000000802240045B0
-:100280000000001800040000000000188000001C9E
-:10029000000000188000001E0000001880000065AB
-:1002A00000000018800000AD00000018800000ACC5
-:1002B000000000188000000000000018800000000E
-:1002C00000000018800000000000001880000000FE
-:1002D00000000018800000000000001880000000EE
-:1002E00000000018800000000000001880000000DE
-:1002F00000000018800000F30000001880000000DB
-:1003000000000018800000000000001880000015A8
-:10031000000000188000001B000000188000000092
-:1003200000000018800000C3000000188000002EAC
-:1003300000000018800000F3000000188000011E7B
-:1003400000000018800000E9000000188000014251
-:10035000000000188000004E00000018800000001F
-:1003600000000018800000800000000C1F800001C9
-:100370000000000005000000000000188000FFA33E
-:100380000000001091D400000000000C2980000142
-:100390000000000C1F800001000000082A0000027D
-:1003A0000000000005000000000000188000FF9D14
-:1003B0000000001091D400000000000C2980000112
-:1003C0000000000C1F800001000000002942000016
-:1003D000000000082A0000020000000005000000E4
-:1003E000000000188000FF96000000188000FF95B4
-:1003F00000000010B1BCB00A0000000B2FDF0002AB
-:100400000000000003D80000000000002C3C0000A9
-:100410000000001091D400000000000806005555AF
-:10042000000000188000002900000018800000BBB8
-:10043000000000102C6201BA0000001880000005C6
-:10044000000000082C80010D000000082D000009AC
-:100450000000001091D40000000000082D8001076A
-:100460000000000C298000000000000C1F8000002C
-:100470000000001091DE0000000000002ADF0000F4
-:10048000000000082A00000600000008050055557D
-:10049000000000188000FF800000001091D40000D0
-:1004A0000000000C298000010000000C1F800001EA
-:1004B000000000082A00000B0000000005000000FA
-:1004C000000000188000FF7A000000000202000017
-:1004D00000000000029A000000000000060C2C0042
-:1004E00000000004C60C340000000010001F0000D3
-:1004F00000000010B196180C0000000806960004D9
-:1005000000000009068DFFFC00000004CD051A0064
-:1005100000000004CC9A18000000001020D7000052
-:100520000000000C2B56000000000000000000003E
-:1005300000000000000000000000001020D70000B4
-:10054000000000080F80000100000010B18001F4DD
-:1005500000000010001F00000000000C6B5600009F
-:1005600000000018000400000000000006820000E7
-:1005700000000010B18A000600000000860C140084
-:1005800000000010B18C0004000000000500000015
-:10059000000000082A0000010000001091D40000B3
-:1005A00000000018000D000000000000050200001F
-:1005B0000000001091DE000000000018000A00009A
-:1005C00000000010B1A0B0130000000B2FDF0002EC
-:1005D000000000002C200000000000082C8000001B
-:1005E000000000082D0000000000001091D4000061
-:1005F0000000000806005555000000188000FFEEBE
-:10060000000000082D80011C00000010001F0000E9
-:100610000000001091DE00000000000F476000089D
-:100620000000000F060E0001000000000F5800003F
-:10063000000000000A640000000000000AE500005D
-:10064000000000090B66FFFF000000000D610000C4
-:1006500000000018800000130000000F4760000831
-:100660000000000B2FDF0002000000082C800000BB
-:10067000000000082D0000000000001091D40000D0
-:10068000000000082D80011C0000000F060E000174
-:1006900000000010001F0000000000000F580000C4
-:1006A0000000001091DE0000000000000A6400005D
-:1006B000000000000AE50000000000090B66FFFFD3
-:1006C000000000000D610000000000000262000058
-:1006D0000000000B2FDF00020000000031040000CA
-:1006E00000000000309A0000000000188000FFBCED
-:1006F0000000000C29800001000000100022000210
-:100700000000000C295200010000000C29520000DA
-:10071000000000080200000E000000080280001A1D
-:1007200000000010B1C40A0200000008020000032B
-:1007300000000008220000010000000C1F800001E2
-:10074000000000002ADF0000000000002A0008006E
-:100750000000000805005555000000188000FF2724
-:100760000000000B2FDF00020000001091D40000F9
-:10077000000000082A000001000000002C200000FA
-:10078000000000082C800000000000082D00000080
-:10079000000000082D80011C0000001091D4000012
-:1007A0000000001091DE0000000000082C80000610
-:1007B000000000082D00000600000000308000004E
-:1007C0000000000031000000000000082D8000063D
-:1007D0000000000C298000010000000C1F800001B7
-:1007E0000000001091DE0000000000002ADF000081
-:1007F000000000082A0000100000000005000000B2
-:10080000000000188000FF120000001091A0B00945
-:10081000000000082C80010D000000082D000009D8
-:100820000000001091D40000000000082D80010796
-:10083000000000188000FFAF0000001880000010CA
-:1008400000000008AC000001000000188000000B50
-:10085000000000000380B0000000000B2FDF00024A
-:10086000000000002C0040000000001091D40000A7
-:100870000000000806005555000000188000FF9E8B
-:100880000000001880000030000000188000000602
-:100890000000000B2FDF0002000000002C000E0003
-:1008A000000000082A000007000000080500555558
-:1008B000000000188000FEFC00000000068200001E
-:1008C0000000000C298000010000000C1F800001C6
-:1008D000000000100CE70007000000090562FFFFA0
-:1008E00000000010BA6C1405000000002ADF0000B0
-:1008F0000000000021000000000000082A000005A0
-:100900000000001091D40000000000082C80010CB1
-:10091000000000082D0000080000000C31620018E3
-:10092000000000082D800001000000188000FF90EA
-:1009300000000018000D000000000010B1A0B00E73
-:100940000000000B2FDF00020000000003D80000B1
-:10095000000000002C2000000000001091D40000D6
-:100960000000001880000014000000102C6200023B
-:10097000000000188000000B0000000B2FDF0002B9
-:10098000000000002C0700000000000C1F80000188
-:100990000000001091DE00000000000005000000D3
-:1009A000000000188000FEDE000000082C80010D11
-:1009B000000000082D0000090000001091D4000084
-:1009C000000000082D8001070000000C29800001B4
-:1009D0000000000C1F8000010000001091DE0000EC
-:1009E000000000002ADF0000000000082A00000AC2
-:1009F0000000000005000000000000188000FED389
-:100A00000000000005020000000000082C80010C1E
-:100A1000000000082D000008000000082D800134AF
-:100A2000000000000000000000000010205F000037
-:100A3000000000082C800140000000082D00003C50
-:100A4000000000082D80011C0000000000000000D4
-:100A500000000010205F0000000000082C800080D3
-:100A6000000000082D000000000000082D80010893
-:100A700000000000000000000000001091DE0000F7
-:100A800000000018000A00000000001091D40000CF
-:100A9000000000080600AAAA000000188000FF5A03
-:100AA0000000000C298000010000000C1F800001E4
-:100AB000000000082A000009000000080500AAAA9A
-:100AC000000000188000FEBA0000001091D4000061
-:100AD0000000000806005555000000188000FF5275
-:100AE0000000001091A03C0200000010B1E6620777
-:100AF0000000000B2FDF0002000000002C3100007E
-:100B0000000000092CB1007F000000082CD9000073
-:100B1000000000082D000000000000082D80010DDD
-:100B200000000010B1A8000600000010205F0000C7
-:100B3000000000002C200000000000002CA7000096
-:100B4000000000082D000010000000082D800108A2
-:100B5000000000188000FF4B00000010B1A600103C
-:100B600000000010001F00000000000F0F30000701
-:100B7000000000000A600000000000000AE1000020
-:100B80000000000F4B620008000000090B1600FF78
-:100B9000000000000D620000000000090D1A00FFB7
-:100BA00000000010073000030000000C0D1A0008C0
-:100BB0000000000C0B1600080000000F4CE30018AA
-:100BC000000000000C992C0000000004CC993400B7
-:100BD000000000080F8000000000000C29800001C8
-:100BE0000000000033310000000000082200001661
-:100BF000000000002ADF0000000000082A00000CAE
-:100C000000000010009F0000000000000F20000006
-:100C10000000000C1F800001000000080500555571
-:100C2000000000188000FE8E0000001091D400002B
-:100C3000000000080600AAAA000000188000FF2695
-:100C40000000000F4722000800000009070E000FF7
-:100C500000000008070E00080000000802800001E4
-:100C60000000000702851C000000000882850001CA
-:100C70000000000002854C000000000742851C00B7
-:100C800000000003C3AA52000000000003B10E00E0
-:100C9000000000074B071C000000000F0F3000078A
-:100CA0000000000F0A960003000000000A955C0097
-:100CB000000000004A005A00000000000C960A00E4
-:100CC000000000090C99FFFF000000080D00FFFF65
-:100CD00000000010B1963202000000080F800005ED
-:100CE00000000010B1A8000800000010205F000004
-:100CF0000000000B2FDF0002000000002C2000008D
-:100D0000000000002CA70000000000082D000010CB
-:100D1000000000082D800108000000188000FF126C
-:100D20000000000C2980000100000010001F0000DE
-:100D30000000000C1F800001000000002ADF0000FE
-:100D4000000000082A00000D000000080500AAAA03
-:100D5000000000188000FE680000001091D4000020
-:100D60000000000806005555000000188000FF0034
-:100D70000000000C298000010000000C1F80000111
-:100D8000000000082A000007000000080500555573
-:100D9000000000188000FE60000000080305000449
-:100DA0000000000683040C00000000080285020019
-:100DB0000000000086050C0000000001860C0E00FB
-:100DC00000000008020400040000000002041800F3
-:100DD00000000000838718000000001800020000D7
-:100DE00000000010B18000040000001F0303010098
-:100DF00000000008050000FF0000001800020000CD
-:100E0000000000002A00000000000010B1D4000023
-:100E10000000000C298000010000000802540009B5
-:100E2000000000092952003F0000001800040000E3
-:100E30000000001880000010000000188000001161
-:100E4000000000188000004B000000188000013CEA
-:100E5000000000188000013B000000188000013AEB
-:100E6000000000188000013A000000188000000017
-:100E7000000000188000014D0000001880000136BD
-:100E8000000000188000000C0000001880000152D3
-:100E900000000018800001AC0000001880000080F5
-:100EA00000000018800001070000001880000115F4
-:100EB000000000002A000000000000188000FFEA87
-:100EC000000000002A0000000000000C2980000043
-:100ED0000000001020530000000000188000FFE612
-:100EE000000000002A000000000000188000FFE45D
-:100EF0000000000003820000000000188000FFDFF7
-:100F0000000000010C161400000000008C181400F2
-:100F10000000001091980003000000080C960002E9
-:100F200000000010B1800003000000080C960001D2
-:100F3000000000000C000000000000000D1900007F
-:100F400000000010205600000000000C2BD700010C
-:100F5000000000080F8000010000000000000000F9
-:100F600000000010001F00000000000C6BD7000103
-:100F700000000010011301F100000018000700003C
-:100F800000000000050200000000001091963421CE
-:100F900000000010205F0000000000002C1E000078
-:100FA000000000082C800006000000082D0000064C
-:100FB000000000082D800102000000000000000079
-:100FC0000000001091DE0000000000000D61000034
-:100FD00000000018000A00000000000005020000E8
-:100FE000000000109196341600000010205F0000F1
-:100FF0000000000009D80000000000002C1E0000C6
-:10100000000000082C80010E000000082D00000ADE
-:10101000000000082D800102000000000000000018
-:101020000000001091DE0000000000000D620000D2
-:10103000000000002C13000000000018000A00004F
-:101040000000000005020000000000109196340925
-:1010500000000010205F0000000000002C1E0000B7
-:10106000000000082C800006000000082D00006A27
-:10107000000000082D8001020000000000000000B8
-:101080000000001091DE0000000000000D7A00005A
-:1010900000000018000A00000000001091DE0000AF
-:1010A00000000010001F00000000000C6BD70001C2
-:1010B000000000002F80AA00000000002A000000AD
-:1010C000000000000D61000000000000036200004D
-:1010D000000000002C4000000000000002638C00B3
-:1010E0000000000026460000000000080204001274
-:1010F00000000010B906082E000000000F58000084
-:10110000000000000A640000000000000AE5000082
-:10111000000000090B66FFFF000000000C0000004B
-:10112000000000000B800000000000080CC6001248
-:10113000000000188000FFCA0000001020560000C8
-:101140000000000C2BD70001000000080F800003F6
-:10115000000000000000000000000010001F000060
-:101160000000000C6BD700010000000827110012DE
-:10117000000000006690000000000008A31B0012A1
-:1011800000000010B198000600000010001F0000D1
-:101190000000000C6BD7000100000010205600007A
-:1011A0000000000C2BD70001000000080F80000495
-:1011B0000000000822000003000000082C80000C42
-:1011C000000000082D00000C00000010001F0000AF
-:1011D0000000000C6BD70001000000002596000005
-:1011E0000000000C298000000000000006660000DE
-:1011F0000000000086611800000000090260000F76
-:101200000000000F0204000200000010B60C0803EA
-:101210000000000C1FBF00000000000C336600102F
-:1012200000000000321400000000000032950000B1
-:101230000000000573662C000000000031E32E0062
-:10124000000000082D800010000000102053000056
-:101250000000001091DE0000000000188000FF7602
-:1012600000000000230000000000000925E6FFFF49
-:10127000000000082200000B0000000C6952000072
-:101280000000000C29800000000000102053000026
-:10129000000000188000FF6F0000001091DE0000C9
-:1012A00000000010001F00000000000C6BD70001C0
-:1012B000000000002F80AA00000000002A000000AB
-:1012C000000000002C400000000000082C800040BE
-:1012D000000000082D000020000000082D80011CE7
-:1012E00000000000000000000000001091DE00007F
-:1012F0000000000F42EA001000000010004F000440
-:1013000000000010B74692000000000802490012D9
-:1013100000000010B5840A00000000000D6100000C
-:1013200000000010BA66346D000000000362000087
-:1013300000000010B8630C6B000000088305001269
-:1013400000000010004F00020000000003490000F0
-:101350000000000183068C000000000083C60C0022
-:1013600000000010B1870010000000000B6E0000AC
-:10137000000000188000FF50000000010669140002
-:1013800000000010918C000200000008B4E9000188
-:1013900000000010B1E92C5F0000000086692C00FD
-:1013A00000000000020000000000000902EAFFFF48
-:1013B00000000010000C00020000000002040A00FF
-:1013C0000000000F460C00010000000F0285000124
-:1013D00000000010918C01FC00000010B7040E56B4
-:1013E000000000002C400000000000000F40000042
-:1013F000000000000D610000000000000A64000011
-:10140000000000000AE50000000000090B66FFFF75
-:10141000000000000C000000000000000B80000035
-:10142000000000080C86001200000010205600008A
-:101430000000000C2BD70001000000080F80000303
-:101440000000000C2952000000000010001F0000E6
-:101450000000000C6BD700010000000827110012EB
-:10146000000000006690000000000000264600001A
-:10147000000000002306000000000010B1980009E1
-:1014800000000010001F00000000000C6BD70001DE
-:1014900000000010205600000000000C2BD70001B7
-:1014A000000000080F8000040000000000000000A1
-:1014B00000000010001F00000000000C6BD70001AE
-:1014C000000000003214000000000000329500000F
-:1014D0000000000031E32E000000000573662C00C0
-:1014E000000000002596000000000010B1870021D8
-:1014F0000000000C298000000000000F0F6B0007A7
-:10150000000000000D690000000000000A6C0000EF
-:10151000000000000AED0000000000000B6E00005B
-:10152000000000000B800000000000000C8700009D
-:10153000000000188000FF18000000010C161400C5
-:10154000000000008C181400000000080C96000138
-:101550000000001091980002000000080C990001A2
-:10156000000000000D190000000000000C00000049
-:1015700000000010205600000000000C2BD70001D6
-:10158000000000080F800001000000102053000040
-:101590000000000C6952000100000010001F000054
-:1015A0000000000C6BD700010000000022C58C0079
-:1015B00000000000231200000000000027110000BE
-:1015C000000000002690000000000010B8170E0375
-:1015D0000000000C29800000000000188000FFEBD4
-:1015E0000000000082970E0000000000A3120A0015
-:1015F000000000082200001A000000082C80000CE7
-:10160000000000082D00000C000000082D800010D4
-:1016100000000010001F00000000000C6BD700014C
-:10162000000000000D6E000000000003E7CF340052
-:101630000000000C298000000000001091DE000076
-:1016400000000010B1870007000000003614000001
-:101650000000000036950000000000003716000072
-:10166000000000082C800050000000082D00003011
-:10167000000000082D80000C000000102053000026
-:10168000000000188000FEF1000000002646000067
-:1016900000000000230000000000000925E6FFFF15
-:1016A000000000000B6E000000000003E7CF2C00DC
-:1016B000000000082200001B0000000C695200001E
-:1016C0000000000C298000000000001020530000E2
-:1016D000000000188000FEE7000000002FD5000089
-:1016E000000000002A00000000000010003F000C75
-:1016F000000000000666000000000000866118007F
-:1017000000000009026000F000000010B70C08089B
-:10171000000000002C4000000000000C7366001068
-:10172000000000082C800018000000082D000018A0
-:10173000000000082D8000020000000C5FBF0000C8
-:101740000000001091DE0000000000188000FED8AC
-:10175000000000002FD50000000000002A0000005B
-:10176000000000002C4000000000000C7366001018
-:10177000000000082C800018000000082D00001850
-:10178000000000082D8000020000000C5FBF000078
-:101790000000001091DE0000000000082C80000313
-:1017A000000000082D000003000000093060FFF079
-:1017B000000000082D8000010000000C29800000BE
-:1017C0000000001091DE0000000000082C80001ACC
-:1017D000000000082D00001A000000003300000087
-:1017E000000000082D800002000000003180000091
-:1017F0000000001091DE0000000000082C80000CAA
-:10180000000000082D00000C000000082D800004DE
-:1018100000000010205300000000001091DE0000C6
-:10182000000000188000FEBD000000188000FEBC13
-:10183000000000002A00000000000010001F00004F
-:101840000000000C6BD70001000000000F008000BA
-:10185000000000080F80000700000018800000153D
-:10186000000000000502000000000008220000093E
-:1018700000000000286D00000000000029000000AA
-:101880000000000F6568001000000003F66C940073
-:1018900000000010B972A0040000000C73E70019EA
-:1018A0000000000C21420004000000003BF6000094
-:1018B0000000000C298000000000001020530000F0
-:1018C00000000008220000080000000C6142000433
-:1018D00000000018000A0000000000002A000000BC
-:1018E00000000010001F00000000000C6BD700017A
-:1018F0000000000F0F470007000000080F800008DD
-:101900000000000C2980000000000010205300009F
-:10191000000000188000FE9F0000001091DE000013
-:10192000000000002FD5000000000010001F000084
-:101930000000000C6BD700010000000033510000D4
-:10194000000000002A00000000000010B1C60029BD
-:101950000000000F0F500007000000000A600000A8
-:10196000000000000AE100000000000F4B620008C8
-:10197000000000090B1600FF0000000F4C62001071
-:10198000000000000D620000000000090D1A00FFB9
-:1019900000000010075000030000000C0D1A0008A2
-:1019A0000000000C0B160008000000000CC6000030
-:1019B000000000000B8000000000000006980000FE
-:1019C00000000010205600000000000C2BD7000182
-:1019D000000000080F8000030000001006C2000491
-:1019E0000000000C29000002000000102642000246
-:1019F0000000000C29520003000000082200000132
-:101A000000000010001F00000000000C6BD7000158
-:101A100000000000231B00000000000027111A0036
-:101A200000000000669000000000000C2952000039
-:101A300000000010B197320C0000000C298000005B
-:101A40000000000006980000000000102053000075
-:101A50000000000C295200030000000022C58C0089
-:101A600000000010001F00000000000C6BD70001F8
-:101A700000000010205600000000000C2BD70001D1
-:101A8000000000080F800003000000188000FFEF36
-:101A900000000010B1C8001300000010B1C6000320
-:101AA0000000000C298000000000001020530000FE
-:101AB0000000000C295200000000000C2952000315
-:101AC0000000001006C200020000000C29520002B3
-:101AD0000000000022C58C00000000002765000007
-:101AE0000000000026E400000000000822000016AC
-:101AF00000000010B1C600030000000023480000F1
-:101B000000000010B1800005000000002348000024
-:101B10000000000C298000000000000F0F5000079B
-:101B200000000018800000120000000822000016CB
-:101B30000000000C298000000000000030140000AC
-:101B40000000000030950000000000100750000366
-:101B5000000000090B1600FF000000090D1A00FF2D
-:101B60000000000F31160008000000003162340050
-:101B700000000003F162300000000010205F000050
-:101B8000000000002C510000000000092CD1007F53
-:101B9000000000082CD90000000000082D00000003
-:101BA000000000082D80000C000000000000000074
-:101BB0000000001091DE00000000001005C20003CC
-:101BC0000000000033000000000000080F80000744
-:101BD000000000102053000000000010001F000053
-:101BE0000000000C6BD70001000000188000FE44CC
-:101BF000000000002FD50000000000002A000000B7
-:101C00000000000F0F50000700000010B1C60030A8
-:101C10000000000F4742000800000009070E000FF7
-:101C200000000008070E000800000010001F000060
-:101C30000000000C6BD70001000000080900000143
-:101C40000000000709121C0000000003CBCA92002C
-:101C5000000000000B97A2000000000742171C00C4
-:101C6000000000000B0400000000000F0A840003C5
-:101C7000000000000A959C00000000004A009A0045
-:101C80000000000882120001000000010C1708008B
-:101C9000000000000C978C000000000002180000FB
-:101CA000000000080D00FFFF000000080F80000684
-:101CB0000000000C290000000000001006C2000413
-:101CC0000000000C29520002000000102642000211
-:101CD0000000000C2952000300000008220000014F
-:101CE00000000010001F00000000000C6BD7000176
-:101CF00000000010B197320D00000000231B00000F
-:101D0000000000002711080000000000669000009D
-:101D10000000000C298000000000000002180000F4
-:101D200000000010205300000000000C29520003A6
-:101D30000000000022C5360000000010001F000057
-:101D40000000000C6BD70001000000080F800006A7
-:101D5000000000188000FFF200000000231B0000BC
-:101D6000000000002711080000000000669000003D
-:101D700000000010B1C8000B0000000C298000001A
-:101D800000000010205300000000000C2952000049
-:101D90000000000C295200030000001006C20002DF
-:101DA0000000000C295200020000000022C58C0037
-:101DB00000000000276500000000000026E400008D
-:101DC0000000000023480000000000082200001767
-:101DD0000000000C2980000000000010001F00001F
-:101DE0000000000C6BD70001000000102053000021
-:081DF000000000188000FE0352
-:00000001FF
-/*
- * This file contains firmware data derived from proprietary unpublished
- * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
- *
- * Permission is hereby granted for the distribution of this firmware data
- * in hexadecimal or equivalent format, provided this copyright notice is
- * accompanying it.
- */
diff --git a/firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex
new file mode 100644
index 0000000..69f5e95
--- /dev/null
+++ b/firmware/bnx2/bnx2-rv2p-09-5.0.0.j3.fw.ihex
@@ -0,0 +1,462 @@
+:100000000000000000000E00000000580000000981
+:1000100000000000000000000000000000000000E0
+:1000200000000000000000000000000000000000D0
+:1000300000000DD800000E58000000050000000070
+:1000400000000000000000000000000000000000B0
+:080050000000000000000000A8
+:0800580000000010B180000659
+:100060000000001F05030300000000080500FFFF5B
+:10007000000000180002000000000008050000FF5A
+:10008000000000180002000000000008AC000001A1
+:1000900000000000050000000000000C2F8000019F
+:1000A000000000002B000000000000002B8000007A
+:1000B0000000001091E0000200000008AC00000108
+:1000C00000000010203F006B00000010213F0003E3
+:1000D0000000001020BF003A000000188000FFFD63
+:1000E00000000010B1B8B0150000000B2FDF0002B7
+:1000F0000000000003D80000000000002C380000C1
+:10010000000000082C800000000000082D00000006
+:100110000000001091D400000000000806005555B2
+:10012000000000188000007C000000082D80011CE9
+:1001300000000008020000010000001091DE000035
+:100140000000000F42E0001C0000001091840A161D
+:1001500000000018800000830000000C29800002CD
+:100160000000000C1F800002000000002ADF0000D9
+:10017000000000082A00000F000000000500000039
+:10018000000000188000FFE60000000802000001E7
+:100190000000000F42E0001C0000001091840A18CB
+:1001A000000000082C800006000000082D0000065A
+:1001B0000000001091D40000000000082D8001060E
+:1001C0000000001880000072000000188000FFF19D
+:1001D00000000008B1000001000000082C80010CA4
+:1001E000000000082D000008000000082D8000011C
+:1001F000000000188000006C0000000B2FDF0002E0
+:100200000000000C1F800002000000002C0700000E
+:100210000000001091DE00000000000805005555A8
+:10022000000000188000FFD20000000B2FDF00024A
+:100230000000000C1F800000000000002C070000E0
+:100240000000001091DE0000000000080500555578
+:10025000000000188000FFCC0000000C1F8000028E
+:100260000000000805005555000000188000FFC977
+:100270000000000C298000020000000C1F8000021A
+:10028000000000002ADF0000000000082A0000052E
+:100290000000000805005555000000188000FFC34D
+:1002A000000000080224004A0000001800040000BA
+:1002B000000000188000001C000000188000001ED4
+:1002C000000000188000006500000018800000BBDE
+:1002D00000000018800000BA000000188000000034
+:1002E00000000018800000000000001880000000DE
+:1002F00000000018800000000000001880000000CE
+:1003000000000018800000000000001880000000BD
+:1003100000000018800000000000001880000106A6
+:10032000000000188000000000000018800000009D
+:100330000000001880000015000000188000001B5D
+:10034000000000188000000000000018800000D1AC
+:10035000000000188000002F000000188000010637
+:10036000000000188000013100000018800000FC2F
+:100370000000001880000155000000188000004EA9
+:100380000000001880000000000000188000008EAF
+:100390000000000C1F8000010000000005000000AC
+:1003A000000000188000FFA20000001091D400009F
+:1003B0000000000C298000010000000C1F800001DB
+:1003C000000000082A0000020000000005000000F4
+:1003D000000000188000FF9C0000001091D4000075
+:1003E0000000000C298000010000000C1F800001AB
+:1003F0000000000029420000000000082A0000025E
+:100400000000000005000000000000188000FF95BB
+:10041000000000188000FF9400000010B1BCB00A7A
+:100420000000000B2FDF00020000000003D80000D6
+:10043000000000002C3C00000000001091D40000DF
+:100440000000000806005555000000188000001745
+:1004500000000018800000CA000000102C6201BAE1
+:100460000000001880000006000000082C80010D2C
+:10047000000000082D0000090000001091D40000C9
+:10048000000000082D8001070000001880000024F3
+:100490000000000C298000000000000C1F800000FC
+:1004A0000000001091DE0000000000002ADF0000C4
+:1004B000000000082A00000600000008050055554D
+:1004C000000000188000FF7E0000001091D40000A2
+:1004D0000000000C298000010000000C1F800001BA
+:1004E000000000082A00000B0000000005000000CA
+:1004F000000000188000FF780000001800020000D3
+:10050000000000000682000000000010B18A000810
+:1005100000000010B18C14070000000B050AFFFF5B
+:1005200000000010B18A000300000000860A1800D5
+:1005300000000010918C0000000000082A0000015B
+:100540000000001091D4000000000018000D000011
+:1005500000000000050200000000001091DE000015
+:1005600000000018000A00000000000006820000E1
+:100570000000001091DE000000000010BEE1000548
+:10058000000000188000FF5F0000000105611400FA
+:1005900000000010918A000200000008B0E1000194
+:1005A00000000018000D000000000000068200009E
+:1005B0000000001091DE000000000010BEE2000507
+:1005C000000000188000FF570000000105621400C1
+:1005D00000000010918A000200000008B1620001D2
+:1005E00000000018000D000000000010B1A0B013C2
+:1005F0000000000B2FDF0002000000002C20000094
+:10060000000000082C800000000000082D00000001
+:100610000000001091D400000000000806005555AD
+:10062000000000188000FFDC000000082D80011C85
+:1006300000000010001F0000000000188000FFE60E
+:100640000000000F476000080000000F060E0001C8
+:10065000000000000F580000000000000A640000C5
+:10066000000000000AE50000000000090B66FFFF23
+:10067000000000000D610000000000188000001361
+:100680000000000F476000080000000B2FDF000291
+:10069000000000082C800000000000082D00000071
+:1006A0000000001091D40000000000082D80011C03
+:1006B0000000000F060E000100000010001F0000E7
+:1006C000000000000F580000000000188000FFD458
+:1006D000000000000A640000000000000AE50000BD
+:1006E000000000090B66FFFF000000000D61000024
+:1006F00000000000026200000000000B2FDF00027B
+:10070000000000003104000000000000309A0000EA
+:10071000000000090560000F00000010B18A000A07
+:100720000000000005634C0000000008050A0012EC
+:1007300000000010B9621403000000000300000074
+:100740000000001880000005000000188000FF2451
+:1007500000000010B60614030000000803060001A4
+:10076000000000188000FF2A000000000C9618000E
+:10077000000000090C99FFFF00000004CC99340030
+:1007800000000010B1963202000000080F80000047
+:100790000000000C298000010000000C295200011B
+:1007A0000000000C29520000000000080200000EAA
+:1007B000000000080280001A00000010B1C40A0204
+:1007C00000000008020000030000000822000001F1
+:1007D0000000000C1F800001000000002ADF000064
+:1007E000000000002A000800000000080500555520
+:1007F000000000188000FF180000000B2FDF00022F
+:100800000000001091D40000000000082A00000140
+:10081000000000002C2000000000001091D4000017
+:10082000000000082C800000000000082D000000DF
+:10083000000000082D80011C000000188000FFA3AC
+:10084000000000082C800006000000082D000006B3
+:1008500000000000308000000000000031000000B7
+:10086000000000082D8000060000000C2980000117
+:100870000000000C1F8000010000001091DE00004D
+:10088000000000002ADF0000000000082A0000101D
+:100890000000000005000000000000188000FF03B9
+:1008A0000000001091A0B009000000082C80010D8C
+:1008B000000000082D0000090000001091D4000085
+:1008C000000000082D800107000000188000FF9C38
+:1008D000000000188000001000000008AC000001BB
+:1008E000000000188000000B000000000380B00032
+:1008F0000000000B2FDF0002000000002C00400071
+:100900000000001091D400000000000806005555BA
+:10091000000000188000FF7E0000001880000031F9
+:1009200000000018800000060000000B2FDF00020E
+:10093000000000002C000E00000000082A00000744
+:100940000000000805005555000000188000FEED6D
+:1009500000000000068200000000000C2980000159
+:100960000000000C1F800001000000100CE70007D1
+:10097000000000090562FFFF00000010BA6C1405BA
+:10098000000000002ADF000000000000210000003D
+:10099000000000082A0000050000001091D40000AB
+:1009A000000000082C80010C000000082D00000849
+:1009B0000000000C31620018000000082D800001CA
+:1009C000000000188000FF7200000018000D0000F9
+:1009D00000000010B1A0B00E0000000B2FDF0002DD
+:1009E0000000000003D80000000000002C200000E0
+:1009F0000000001091D400000000001880000015D5
+:100A0000000000102C620002000000188000000CA2
+:100A10000000000B2FDF0002000000002C07000088
+:100A20000000000C1F8000010000001091DE00009B
+:100A3000000000080500FFFF000000188000FECF46
+:100A4000000000082C80010D000000082D000009A6
+:100A50000000001091D40000000000082D80010764
+:100A6000000000188000FF690000000C29800001D0
+:100A70000000000C1F8000010000001091DE00004B
+:100A8000000000002ADF0000000000082A00000A21
+:100A90000000000005000000000000188000FEC3F8
+:100AA0000000000006820000000000082C80010CFD
+:100AB000000000082D000008000000082D8001340F
+:100AC000000000000000000000000010205F000097
+:100AD000000000082C800140000000082D00003CB0
+:100AE000000000082D80012400000000000000002C
+:100AF0000000001091DE0000000000082C80008043
+:100B0000000000082D000000000000082D800105F5
+:100B100000000010BEE20005000000188000FEACDE
+:100B2000000000010562140000000010918A00021C
+:100B300000000008B16200010000001091DE00001A
+:100B400000000018000D00000000001091D400000B
+:100B5000000000080600AAAA000000188000FF3567
+:100B60000000000C298000010000000C1F80000123
+:100B7000000000082A000009000000080500AAAAD9
+:100B8000000000188000FEA60000001091D40000B4
+:100B90000000000806005555000000188000FF2DD9
+:100BA0000000001091A03C0200000010B1E66207B6
+:100BB0000000000B2FDF0002000000002C310000BD
+:100BC000000000092CB1007F000000082CD90000B3
+:100BD000000000082D000000000000082D80010D1D
+:100BE00000000010B1A8000600000010205F000007
+:100BF000000000002C200000000000002CA70000D6
+:100C0000000000082D000010000000082D800108E1
+:100C1000000000188000FF2800000010B1A600109E
+:100C200000000010001F00000000000F0F30000740
+:100C3000000000000A600000000000000AE100005F
+:100C40000000000F4B620008000000090B1600FFB7
+:100C5000000000000D620000000000090D1A00FFF6
+:100C600000000010073000030000000C0D1A0008FF
+:100C70000000000C0B1600080000000F4CE30018E9
+:100C8000000000000C992C0000000004CC993400F6
+:100C9000000000080F8000000000000C2980000107
+:100CA00000000000333100000000000822000016A0
+:100CB000000000002ADF0000000000082A00000CED
+:100CC00000000010009F0000000000000F20000046
+:100CD0000000000C1F8000010000000805005555B1
+:100CE000000000188000FE7A0000001091D400007F
+:100CF000000000080600AAAA000000188000FF01FA
+:100D00000000000F4722000800000009070E000F36
+:100D100000000008070E0008000000080280000123
+:100D20000000000702851C00000000088285000109
+:100D30000000000002854C000000000742851C00F6
+:100D400000000003C3AA52000000000003B10E001F
+:100D5000000000074B071C000000000F0F300007C9
+:100D60000000000F0A960003000000000A955C00D6
+:100D7000000000004A005A00000000000C960A0023
+:100D8000000000090C99FFFF000000080D00FFFFA4
+:100D900000000010B1963202000000080F8000052C
+:100DA00000000010B1A8000800000010205F000043
+:100DB0000000000B2FDF0002000000002C200000CC
+:100DC000000000002CA70000000000082D0000100B
+:100DD000000000082D800108000000188000FEEFD0
+:100DE0000000000C2980000100000010001F00001E
+:100DF0000000000C1F800001000000002ADF00003E
+:100E0000000000082A00000D000000080500AAAA42
+:100E1000000000188000FE540000001091D4000073
+:100E20000000000806005555000000188000FEDB99
+:100E30000000000C298000010000000C1F80000150
+:100E4000000000082A0000070000000805005555B2
+:080E5000000000188000FE4CB8
+:080E580000000010B18000044D
+:100E60000000001F0503030000000008050000FF4C
+:100E70000000001800020000000000002A0000002E
+:100E800000000010B1D400000000001091DE00004E
+:100E9000000000102053000000000010001F0000A0
+:100EA000000000002F80AA000000000C2980000133
+:100EB000000000080254000E000000002C4000005A
+:100EC000000000092952003F000000180004000043
+:100ED00000000018800000100000001880000011C1
+:100EE000000000188000003900000018800000FD9C
+:100EF00000000018800000FC00000018800000FBCB
+:100F000000000018800000FB0000001880000000B6
+:100F1000000000188000011300000018800000F796
+:100F2000000000188000000B00000018800001176E
+:100F300000000018800001650000001880000063B8
+:100F400000000018800000CE00000018800000DEC5
+:100F5000000000002A000000000000188000FFE5EB
+:100F6000000000002A0000000000000C29800000A2
+:100F7000000000188000FFE2000000002A000000CE
+:100F8000000000188000FFE00000001800020000D0
+:100F900000000000050200000000001091963421BE
+:100FA00000000010205F0000000000002C1E000068
+:100FB000000000082C800006000000082D0000063C
+:100FC000000000082D800102000000000000000069
+:100FD0000000001091DE0000000000000D61000024
+:100FE00000000018000A00000000000005020000D8
+:100FF000000000109196341600000010205F0000E1
+:101000000000000009D80000000000002C1E0000B5
+:10101000000000082C80010E000000082D00000ACE
+:10102000000000082D800102000000000000000008
+:101030000000001091DE0000000000000D620000C2
+:10104000000000002C13000000000018000A00003F
+:101050000000000005020000000000109196340915
+:1010600000000010205F0000000000002C1E0000A7
+:10107000000000082C800006000000082D00006A17
+:10108000000000082D8001020000000000000000A8
+:101090000000001091DE0000000000000D7A00004A
+:1010A00000000018000A0000000000002A000000F4
+:1010B000000000000D61000000000000036200005D
+:1010C00000000010234200C10000000002638C00F9
+:1010D0000000000026460000000000080204001284
+:1010E00000000010B9060827000000000F5800009B
+:1010F000000000000A640000000000000AE5000093
+:10110000000000090B66FFFF000000000C0000005B
+:10111000000000000B800000000000080CC6001258
+:10112000000000188000FFCE000000080F800003C0
+:10113000000000000000000000000010009F000000
+:101140000000000827110012000000006690000057
+:1011500000000008A31B001200000010B19800035B
+:1011600000000010001F0000000000080F800004B5
+:101170000000000822000003000000082C80000C82
+:10118000000000082D00000C00000010009F00006F
+:1011900000000000259600000000000C29800000DF
+:1011A00000000000066600000000000086611800D4
+:1011B000000000090260000F0000000F020400029E
+:1011C00000000010B60C08050000000C1FBF000056
+:1011D000000000102866000300000008078F0001CF
+:1011E0000000000C33660010000000003214000004
+:1011F00000000000329500000000000573662C001E
+:101200000000000031E32E00000000082D800010D7
+:10121000000000188000FF8E000000002300000086
+:101220000000000925E6FFFF000000082200000B77
+:101230000000000C695200000000000C2980000032
+:101240000000001028660075000000188000FF876D
+:10125000000000002A000000000000082C80004070
+:10126000000000082D000020000000082D80011C57
+:1012700000000000000000000000001091DE0000EF
+:101280000000000F42EA001000000010004F0004B0
+:1012900000000010B746920000000008024900124A
+:1012A00000000010B5840A00000000000D6100007D
+:1012B00000000010BA6634570000000883050012D1
+:1012C00000000010004F0002000000000349000071
+:1012D0000000000183068C000000000083C60C00A3
+:1012E00000000010B1870011000000000B6E00002C
+:1012F00000000010BEE90005000000188000FF6E2D
+:10130000000000010569140000000010918A00022D
+:1013100000000008B4E9000100000010B1E92C4A07
+:101320000000000086692C000000000002000000A0
+:101330000000000902EAFFFF00000010000C00029C
+:101340000000000002040A000000000F460C00012B
+:101350000000000F0285000100000010918C01FCCC
+:1013600000000010B7040E41000000000F40000014
+:10137000000000000D610000000000000A64000091
+:10138000000000000AE50000000000090B66FFFFF6
+:10139000000000000C000000000000000B800000B6
+:1013A000000000080C860012000000080F800003F7
+:1013B0000000000C2952000000000010009F0000F7
+:1013C00000000008271100120000000066900000D5
+:1013D0000000000026460000000000002306000078
+:1013E00000000010B198000500000010001F000070
+:1013F000000000080F800004000000000000000052
+:1014000000000010001F0000000000003214000067
+:1014100000000000329500000000000031E32E00C3
+:101420000000000573662C000000000025960000F7
+:1014300000000010B18700160000000C2980000099
+:101440000000000F0F6B0007000000000D69000096
+:10145000000000000A6C0000000000000AED00001F
+:10146000000000000B6E0000000000000B80000078
+:10147000000000000C870000000000080F8000033F
+:1014800000000010205300000000000C6952000111
+:1014900000000010001F00000000000022C58C00AA
+:1014A00000000000231B00000000000027110000C6
+:1014B000000000002690000000000010B8170E0386
+:1014C0000000000C29800000000000188000FFF6DA
+:1014D00000000010B1980002000000080F80000416
+:1014E000000000082200001A000000082C80000CF8
+:1014F000000000082D00000C000000082D800010E6
+:1015000000000010001F0000000000000D6E000031
+:1015100000000003E7CF34000000000C2980000029
+:101520000000001091DE000000000010B1870007ED
+:101530000000000036140000000000003695000096
+:101540000000000037160000000000082C8000504A
+:10155000000000082D000030000000082D80000C65
+:10156000000000188000FF24000000002646000054
+:1015700000000000230000000000000925E6FFFF36
+:10158000000000000B6E000000000003E7CF2C00FD
+:10159000000000082200001B0000000C695200003F
+:1015A0000000000C29800000000000188000FF1BD4
+:1015B000000000002A00000000000010086600057E
+:1015C00000000000066600000000000086611800B0
+:1015D00000000009026000F000000010B60C0802D4
+:1015E000000000188000FF140000000006820000C8
+:1015F00000000010B18F000000000008878F00017C
+:101600000000000C73660010000000082C80001819
+:10161000000000082D000018000000082D800002C6
+:101620000000000C5FBF00000000001091DE000011
+:1016300000000018000D0000000000002A0000005B
+:1016400000000010286601F5000000082C8000034F
+:10165000000000082D000003000000093060FFF0CA
+:10166000000000082D8000010000000C298000000F
+:101670000000001091DE0000000000082C80001A1D
+:10168000000000082D00001A00000005736600002D
+:10169000000000082D8000020000000031800000E2
+:1016A0000000001091DE0000000000082C80000CFB
+:1016B000000000082D00000C000000082D80000430
+:1016C000000000188000FEF8000000180002000072
+:1016D000000000188000FEF6000000002A00000054
+:1016E00000000010001F0000000000000F0080003C
+:1016F000000000080F800007000000188000001A9A
+:1017000000000000280A00000000000005020000A0
+:10171000000000082200000900000000290000006D
+:101720000000000F6568001000000003F66C9400D4
+:1017300000000010B972A0040000000C73E700194B
+:101740000000000C21420004000000003CF80000F2
+:101750000000000C29800000000000102053000051
+:1017600000000008220000080000000C6142000494
+:1017700000000018000A0000000000000502000040
+:101780000000000C61420000000000100142000354
+:101790000000000C33E7001D0000000C6142000255
+:1017A00000000018000A0000000000002A000000ED
+:1017B00000000010001F00000000000F0F4700078E
+:1017C000000000080F8000080000000C29800000C5
+:1017D00000000010009F0000000000188000FED5EF
+:1017E0000000000033510000000000002A0000004B
+:1017F00000000010B1C600230000000F0F500007CA
+:10180000000000000A600000000000000AE1000083
+:101810000000000F4B620008000000090B1600FFDB
+:101820000000000F4C620010000000000D6200007C
+:10183000000000090D1A00FF00000010075000030F
+:101840000000000C0D1A00080000000C0B16000828
+:10185000000000000CC60000000000000B8000002B
+:101860000000000006980000000000080F80000340
+:101870000000001006C200040000000C2900000255
+:1018800000000010264200020000000C2952000354
+:10189000000000082200000100000010009F00006E
+:1018A00000000000231B00000000000027111A00A8
+:1018B00000000000669000000000000C29520000AB
+:1018C00000000010B19732090000000C29800000D0
+:1018D00000000000069800000000001020530000E7
+:1018E0000000000C295200030000000022C58C00FB
+:1018F00000000010001F0000000000080F8000031F
+:10190000000000188000FFF300000010B1C80013B1
+:1019100000000010B1C600030000000C2980000088
+:1019200000000010205300000000000C29520000AD
+:101930000000000C295200030000001006C2000243
+:101940000000000C295200020000000022C58C009B
+:1019500000000000276500000000000026E40000F1
+:10196000000000082200001600000010B1C60003AD
+:10197000000000002348000000000010B1800005B6
+:1019800000000000234800000000000C2980000037
+:101990000000000F0F500007000000188000001228
+:1019A00000000008220000160000000C2980000042
+:1019B000000000003014000000000000309500001E
+:1019C0000000001007500003000000090B1600FF84
+:1019D000000000090D1A00FF0000000F311600087A
+:1019E000000000003162340000000003F1623000AA
+:1019F00000000010205F0000000000002C510000DB
+:101A0000000000092CD1007F000000082CD9000044
+:101A1000000000082D000000000000082D80000CD0
+:101A200000000000000000000000001091DE000037
+:101A30000000001005C20004000000080F8000072D
+:101A4000000000003300000000000010009F0000B4
+:101A5000000000188000FE86000000002A00000040
+:101A60000000000F0F50000700000010B1C6002D4D
+:101A70000000000F4742000800000009070E000F99
+:101A800000000008070E000800000010001F000002
+:101A900000000008090000010000000709121C00F6
+:101AA00000000003CBCA9200000000000B97A200C8
+:101AB0000000000742171C00000000000B0400009B
+:101AC0000000000F0A840003000000000A959C003B
+:101AD000000000004A009A00000000088212000185
+:101AE000000000010C170800000000000C978C009B
+:101AF0000000000002180000000000080D00FFFFB9
+:101B0000000000080F8000060000000C2900000003
+:101B10000000001006C200040000000C2952000260
+:101B200000000010264200020000000C29520003B1
+:101B3000000000082200000100000010009F0000CB
+:101B400000000010B197320C00000000231B0000C1
+:101B5000000000002711080000000000669000004F
+:101B60000000000C298000000000000002180000A6
+:101B700000000010205300000000000C2952000358
+:101B80000000000022C5360000000010001F000009
+:101B9000000000080F800006000000188000FFF41D
+:101BA00000000000231B00000000000027110800B7
+:101BB000000000006690000000000010B1C8000B9B
+:101BC0000000000C298000000000001020530000DD
+:101BD0000000000C295200000000000C29520003F4
+:101BE0000000001006C200020000000C2952000292
+:101BF0000000000022C58C000000000027650000E6
+:101C00000000000026E4000000000000234800005F
+:101C100000000008220000170000000C29800000CE
+:101C200000000010001F0000000000188000FE4BA4
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex b/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex
new file mode 100644
index 0000000..533dbea
--- /dev/null
+++ b/firmware/bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw.ihex
@@ -0,0 +1,498 @@
+:100000000000000000000E78000000580000000909
+:1000100000000000000000000000000000000000E0
+:1000200000000000000000000000000000000000D0
+:1000300000000FA800000ED0000000050000000026
+:1000400000000000000000000000000000000000B0
+:080050000000000000000000A8
+:0800580000000010B180000659
+:100060000000001F03030300000000080500FFFF5D
+:10007000000000180002000000000008050000FF5A
+:10008000000000180002000000000008AC000001A1
+:1000900000000000050000000000000C2F8000019F
+:1000A000000000002B000000000000002B8000007A
+:1000B0000000001091E0000200000008AC00000108
+:1000C00000000010203F006B00000010213F0003E3
+:1000D0000000001020BF003A000000188000FFFD63
+:1000E00000000010B1B8B0150000000B2FDF0002B7
+:1000F0000000000003D80000000000002C380000C1
+:10010000000000082C800000000000082D00000006
+:100110000000001091D400000000000806005555B2
+:10012000000000188000008F000000082D80011CD6
+:1001300000000008020000010000001091DE000035
+:100140000000000F42E0001C0000001091840A161D
+:1001500000000018800000960000000C29800002BA
+:100160000000000C1F800002000000002ADF0000D9
+:10017000000000082A00000F000000000500000039
+:10018000000000188000FFE60000000802000001E7
+:100190000000000F42E0001C0000001091840A18CB
+:1001A000000000082C800006000000082D0000065A
+:1001B0000000001091D40000000000082D8001060E
+:1001C0000000001880000085000000188000FFF18A
+:1001D00000000008B1000001000000082C80010CA4
+:1001E000000000082D000008000000082D8000011C
+:1001F000000000188000007F0000000B2FDF0002CD
+:100200000000000C1F800002000000002C0700000E
+:100210000000001091DE00000000000805005555A8
+:10022000000000188000FFD20000000B2FDF00024A
+:100230000000000C1F800000000000002C070000E0
+:100240000000001091DE0000000000080500555578
+:10025000000000188000FFCC0000000C1F8000028E
+:100260000000000805005555000000188000FFC977
+:100270000000000C298000020000000C1F8000021A
+:10028000000000002ADF0000000000082A0000052E
+:100290000000000805005555000000188000FFC34D
+:1002A000000000080224004A0000001800040000BA
+:1002B000000000188000001C000000188000001ED4
+:1002C000000000188000007800000018800000CABC
+:1002D00000000018800000C9000000188000000025
+:1002E00000000018800000000000001880000000DE
+:1002F00000000018800000000000001880000000CE
+:1003000000000018800000000000001880000000BD
+:100310000000001880000000000000188000011597
+:10032000000000188000000000000018800000009D
+:100330000000001880000015000000188000001B5D
+:10034000000000188000000000000018800000E09D
+:10035000000000188000002F000000188000011528
+:100360000000001880000140000000188000010B10
+:100370000000001880000164000000188000006187
+:100380000000001880000000000000188000009DA0
+:100390000000000C1F8000010000000005000000AC
+:1003A000000000188000FFA20000001091D400009F
+:1003B0000000000C298000010000000C1F800001DB
+:1003C000000000082A0000020000000005000000F4
+:1003D000000000188000FF9C0000001091D4000075
+:1003E0000000000C298000010000000C1F800001AB
+:1003F0000000000029420000000000082A0000025E
+:100400000000000005000000000000188000FF95BB
+:10041000000000188000FF9400000010B1BCB00A7A
+:100420000000000B2FDF00020000000003D80000D6
+:10043000000000002C3C00000000001091D40000DF
+:100440000000000806005555000000188000002A32
+:1004500000000018800000D9000000102C6201BAD2
+:100460000000001880000006000000082C80010D2C
+:10047000000000082D0000090000001091D40000C9
+:10048000000000082D8001070000001880000037E0
+:100490000000000C298000000000000C1F800000FC
+:1004A0000000001091DE0000000000002ADF0000C4
+:1004B000000000082A00000600000008050055554D
+:1004C000000000188000FF7E0000001091D40000A2
+:1004D0000000000C298000010000000C1F800001BA
+:1004E000000000082A00000B0000000005000000CA
+:1004F000000000188000FF780000000002020000E9
+:1005000000000000029A000000000000060C2C0011
+:1005100000000004C60C340000000010001F0000A2
+:1005200000000010B196180C0000000806960004A8
+:1005300000000009068DFFFC00000004CD051A0034
+:1005400000000004CC9A18000000001020D7000022
+:100550000000000C2B56000000000000000000000E
+:1005600000000000000000000000001020D7000084
+:10057000000000080F80000100000010B18001F4AD
+:1005800000000010001F00000000000C6B5600006F
+:1005900000000018000400000000000006820000B7
+:1005A00000000010B18A000800000010B18C140790
+:1005B0000000000B050AFFFF00000010B18A0003D5
+:1005C00000000000860A180000000010918C000056
+:1005D000000000082A0000010000001091D4000073
+:1005E00000000018000D00000000000005020000DF
+:1005F0000000001091DE000000000018000A00005A
+:1006000000000000068200000000001091DE0000E3
+:1006100000000010BEE10005000000188000FF4C43
+:10062000000000010561140000000010918A000222
+:1006300000000008B0E1000100000018000D0000FB
+:1006400000000000068200000000001091DE0000A3
+:1006500000000010BEE20005000000188000FF440A
+:10066000000000010562140000000010918A0002E1
+:1006700000000008B162000100000018000D000039
+:1006800000000010B1A0B0130000000B2FDF00022B
+:10069000000000002C200000000000082C8000005A
+:1006A000000000082D0000000000001091D40000A0
+:1006B0000000000806005555000000188000FFDC0F
+:1006C000000000082D80011C00000010001F000029
+:1006D000000000188000FFE60000000F47600008DF
+:1006E0000000000F060E0001000000000F5800007F
+:1006F000000000000A640000000000000AE500009D
+:10070000000000090B66FFFF000000000D61000003
+:1007100000000018800000130000000F4760000870
+:100720000000000B2FDF0002000000082C800000FA
+:10073000000000082D0000000000001091D400000F
+:10074000000000082D80011C0000000F060E0001B3
+:1007500000000010001F0000000000000F58000003
+:10076000000000188000FFD4000000000A640000B0
+:10077000000000000AE50000000000090B66FFFF12
+:10078000000000000D610000000000000262000097
+:100790000000000B2FDF0002000000003104000009
+:1007A00000000000309A0000000000090560000F02
+:1007B00000000010B18A000A0000000005634C0030
+:1007C00000000008050A001200000010B9621403BE
+:1007D0000000000003000000000000188000000579
+:1007E000000000188000FF1100000010B60614037E
+:1007F0000000000803060001000000188000FF1739
+:10080000000000188000FF9F0000000C29800001FC
+:100810000000000C295200010000000C29520000C9
+:10082000000000080200000E000000080280001A0C
+:1008300000000010B1C40A0200000008020000031A
+:1008400000000008220000010000000C1F800001D1
+:10085000000000002ADF0000000000002A0008005D
+:100860000000000805005555000000188000FF0931
+:100870000000000B2FDF00020000001091D40000E8
+:10088000000000082A000001000000002C200000E9
+:100890000000001091D40000000000082C8000002F
+:1008A000000000082D000000000000082D80011C41
+:1008B000000000188000FFA7000000082C80000640
+:1008C000000000082D00000600000000308000003D
+:1008D0000000000031000000000000082D8000062C
+:1008E0000000000C298000010000000C1F800001A6
+:1008F0000000001091DE0000000000002ADF000070
+:10090000000000082A0000100000000005000000A0
+:10091000000000188000FEF40000001091A0B00953
+:10092000000000082C80010D000000082D000009C7
+:100930000000001091D40000000000082D80010785
+:10094000000000188000FFA00000001880000010C8
+:1009500000000008AC000001000000188000000B3F
+:10096000000000000380B0000000000B2FDF000239
+:10097000000000002C0040000000001091D4000096
+:100980000000000806005555000000188000FF8296
+:1009900000000018800000310000001880000006F0
+:1009A0000000000B2FDF0002000000002C000E00F2
+:1009B000000000082A000007000000080500555547
+:1009C000000000188000FEDE00000000068200002B
+:1009D0000000000C298000010000000C1F800001B5
+:1009E000000000100CE70007000000090562FFFF8F
+:1009F00000000010BA6C1405000000002ADF00009F
+:100A00000000000021000000000000082A0000058E
+:100A10000000001091D40000000000082C80010CA0
+:100A2000000000082D0000080000000C31620018D2
+:100A3000000000082D800001000000188000FF76F3
+:100A400000000018000D000000000010B1A0B00E62
+:100A50000000000B2FDF00020000000003D80000A0
+:100A6000000000002C2000000000001091D40000C5
+:100A70000000001880000015000000102C62000229
+:100A8000000000188000000C0000000B2FDF0002A7
+:100A9000000000002C0700000000000C1F80000177
+:100AA0000000001091DE0000000000080500FFFFBC
+:100AB000000000188000FEC0000000082C80010D1E
+:100AC000000000082D0000090000001091D4000073
+:100AD000000000082D800107000000188000FF6D55
+:100AE0000000000C298000010000000C1F800001A4
+:100AF0000000001091DE0000000000002ADF00006E
+:100B0000000000082A00000A0000000005000000A4
+:100B1000000000188000FEB4000000000682000003
+:100B2000000000082C80010C000000082D000008C7
+:100B3000000000082D8001340000000000000000CB
+:100B400000000010205F0000000000082C80014021
+:100B5000000000082D00003C000000082D80011C52
+:100B600000000000000000000000001091DE000006
+:100B7000000000082C800080000000082D0000000C
+:100B8000000000082D80010500000010BEE20005F5
+:100B9000000000188000FE9D0000000105621400A6
+:100BA00000000010918A000200000008B1620001FC
+:100BB0000000001091DE000000000018000D000091
+:100BC0000000001091D40000000000080600AAAA4E
+:100BD000000000188000FF390000000C298000018F
+:100BE0000000000C1F800001000000082A0000091E
+:100BF000000000080500AAAA000000188000FE9767
+:100C00000000001091D400000000000806005555B7
+:100C1000000000188000FF310000001091A03C028D
+:100C200000000010B1E662070000000B2FDF000299
+:100C3000000000002C310000000000092CB1007FF2
+:100C4000000000082CD90000000000082D00000062
+:100C5000000000082D80010D00000010B1A8000662
+:100C600000000010205F0000000000002C200000A9
+:100C7000000000002CA70000000000082D0000105C
+:100C8000000000082D800108000000188000FF2CE3
+:100C900000000010B1A6001000000010001F0000AE
+:100CA0000000000F0F300007000000000A60000085
+:100CB000000000000AE100000000000F4B62000885
+:100CC000000000090B1600FF000000000D6200008C
+:100CD000000000090D1A00FF00000010073000039B
+:100CE0000000000C0D1A00080000000C0B16000894
+:100CF0000000000F4CE30018000000000C992C00CD
+:100D000000000004CC993400000000080F800000AF
+:100D10000000000C298000010000000033310000B9
+:100D20000000000822000016000000002ADF00007A
+:100D3000000000082A00000C00000010009F0000C6
+:100D4000000000000F2000000000000C1F800001C8
+:100D50000000000805005555000000188000FE6BDB
+:100D60000000001091D40000000000080600AAAAAC
+:100D7000000000188000FF050000000F4722000857
+:100D800000000009070E000F00000008070E000811
+:100D900000000008028000010000000702851C001E
+:100DA00000000008828500010000000002854C0060
+:100DB0000000000742851C0000000003C3AA520087
+:100DC0000000000003B10E00000000074B071C00EC
+:100DD0000000000F0F3000070000000F0A9600030C
+:100DE000000000000A955C00000000004A005A0064
+:100DF000000000000C960A00000000090C99FFFF9B
+:100E0000000000080D00FFFF00000010B196320244
+:100E1000000000080F80000500000010B1A80008C5
+:100E200000000010205F00000000000B2FDF000218
+:100E3000000000002C200000000000002CA7000093
+:100E4000000000082D000010000000082D8001089F
+:100E5000000000188000FEF30000000C2980000153
+:100E600000000010001F00000000000C1F800001A7
+:100E7000000000002ADF0000000000082A00000D2A
+:100E8000000000080500AAAA000000188000FE4526
+:100E90000000001091D40000000000080600555525
+:100EA000000000188000FEDF0000000C2980000117
+:100EB0000000000C1F800001000000082A0000074D
+:100EC0000000000805005555000000188000FE3D98
+:100ED00000000010B18000040000001F03030300A5
+:100EE00000000008050000FF0000001800020000DC
+:100EF000000000002A00000000000010B1D4000033
+:100F00000000001091DE00000000001020530000DF
+:100F100000000010001F00000000000C6BD7000153
+:100F2000000000002F80AA000000000C29800001B2
+:100F3000000000080254000F000000002C400000D8
+:100F4000000000092952003F0000001800040000C2
+:100F50000000001880000010000000188000001140
+:100F6000000000188000004A0000001880000128DE
+:100F700000000018800001270000001880000126F2
+:100F8000000000188000012600000018800000000A
+:100F9000000000188000013F0000001880000122BE
+:100FA000000000188000000B0000001880000145C0
+:100FB000000000188000019A000000188000007BEB
+:100FC00000000018800000F90000001880000109EE
+:100FD000000000002A000000000000188000FFE46C
+:100FE000000000002A0000000000000C2980000022
+:100FF000000000188000FFE1000000002A0000004F
+:10100000000000188000FFDF0000000003820000E5
+:10101000000000188000FFDA000000010C16140028
+:10102000000000008C1814000000001091980003CC
+:10103000000000080C96000200000010B1800003C0
+:10104000000000080C960001000000000C000000E9
+:10105000000000000D1900000000001020560000E4
+:101060000000000C2BD70001000000080F800001D9
+:10107000000000000000000000000010001F000041
+:101080000000000C6BD7000100000010011301F1FB
+:10109000000000180007000000000000050200002A
+:1010A000000000109196342100000010205F000025
+:1010B000000000002C1E0000000000082C8000062C
+:1010C000000000082D000006000000082D8001022D
+:1010D00000000000000000000000001091DE000091
+:1010E000000000000D61000000000018000A000070
+:1010F0000000000005020000000000109196341668
+:1011000000000010205F00000000000009D800006F
+:10111000000000002C1E0000000000082C80010EC2
+:10112000000000082D00000A000000082D800102C8
+:1011300000000000000000000000001091DE000030
+:10114000000000000D620000000000002C130000F1
+:1011500000000018000A0000000000000502000066
+:10116000000000109196340900000010205F00007C
+:10117000000000002C1E0000000000082C8000066B
+:10118000000000082D00006A000000082D80010208
+:1011900000000000000000000000001091DE0000D0
+:1011A000000000000D7A000000000018000A000096
+:1011B000000000002A000000000000000D61000097
+:1011C000000000000362000000000010234200DB6A
+:1011D0000000000002638C000000000026460000B2
+:1011E000000000080204001200000010B906082EDA
+:1011F000000000000F580000000000000A6400001A
+:10120000000000000AE50000000000090B66FFFF77
+:10121000000000000C000000000000000B80000037
+:10122000000000080CC60012000000188000FFCE6D
+:1012300000000010205600000000000C2BD7000119
+:10124000000000080F800003000000000000000004
+:1012500000000010001F00000000000C6BD7000110
+:101260000000000827110012000000006690000036
+:1012700000000008A31B001200000010B198000637
+:1012800000000010001F00000000000C6BD70001E0
+:1012900000000010205600000000000C2BD70001B9
+:1012A000000000080F800004000000082200000376
+:1012B000000000082C80000C000000082D00000C2D
+:1012C00000000010001F00000000000C6BD70001A0
+:1012D00000000000259600000000000C298000009E
+:1012E0000000000006660000000000008661180093
+:1012F000000000090260000F0000000F020400025D
+:1013000000000010B60C08050000000C1FBF000014
+:10131000000000102866000300000008078F00018D
+:101320000000000C336600100000000032140000C2
+:1013300000000000329500000000000573662C00DC
+:101340000000000031E32E00000000082D80001096
+:10135000000000188000FF7500000000230000005E
+:101360000000000925E6FFFF000000082200000B36
+:101370000000000C695200000000000C29800000F1
+:101380000000001028660088000000188000FF6E32
+:10139000000000002A000000000000082C8000402F
+:1013A000000000082D000020000000082D80011C16
+:1013B00000000000000000000000001091DE0000AE
+:1013C0000000000F42EA001000000010004F00046F
+:1013D00000000010B7469200000000080249001209
+:1013E00000000010B5840A00000000000D6100003C
+:1013F00000000010BA66346A00000008830500127D
+:1014000000000010004F000200000000034900002F
+:101410000000000183068C000000000083C60C0061
+:1014200000000010B1870011000000000B6E0000EA
+:1014300000000010BEE90005000000188000FF5504
+:10144000000000010569140000000010918A0002EC
+:1014500000000008B4E9000100000010B1E92C5DB3
+:101460000000000086692C0000000000020000005F
+:101470000000000902EAFFFF00000010000C00025B
+:101480000000000002040A000000000F460C0001EA
+:101490000000000F0285000100000010918C01FC8B
+:1014A00000000010B7040E54000000000F400000C0
+:1014B000000000000D610000000000000A64000050
+:1014C000000000000AE50000000000090B66FFFFB5
+:1014D000000000000C000000000000000B80000075
+:1014E000000000080C8600120000001020560000CA
+:1014F0000000000C2BD70001000000080F80000343
+:101500000000000C2952000000000010001F000025
+:101510000000000C6BD7000100000008271100122A
+:101520000000000066900000000000002646000059
+:10153000000000002306000000000010B198000920
+:1015400000000010001F00000000000C6BD700011D
+:1015500000000010205600000000000C2BD70001F6
+:10156000000000080F8000040000000000000000E0
+:1015700000000010001F00000000000C6BD70001ED
+:10158000000000003214000000000000329500004E
+:101590000000000031E32E000000000573662C00FF
+:1015A000000000002596000000000010B187002117
+:1015B0000000000C298000000000000F0F6B0007E6
+:1015C000000000000D690000000000000A6C00002F
+:1015D000000000000AED0000000000000B6E00009B
+:1015E000000000000B800000000000000C870000DD
+:1015F000000000188000FF1E000000010C161400FF
+:10160000000000008C181400000000080C96000177
+:101610000000001091980002000000080C990001E1
+:10162000000000000D190000000000000C00000088
+:1016300000000010205600000000000C2BD7000115
+:10164000000000080F80000100000010205300007F
+:101650000000000C6952000100000010001F000093
+:101660000000000C6BD700010000000022C58C00B8
+:1016700000000000231200000000000027110000FD
+:10168000000000002690000000000010B8170E03B4
+:101690000000000C29800000000000188000FFEB13
+:1016A0000000000082970E0000000000A3120A0054
+:1016B000000000082200001A000000082C80000C26
+:1016C000000000082D00000C000000082D80001014
+:1016D00000000010001F00000000000C6BD700018C
+:1016E000000000000D6E000000000003E7CF340092
+:1016F0000000000C298000000000001091DE0000B6
+:1017000000000010B1870007000000003614000040
+:1017100000000000369500000000000037160000B1
+:10172000000000082C800050000000082D00003050
+:10173000000000082D80000C000000188000FEF85A
+:10174000000000002646000000000000230000000A
+:101750000000000925E6FFFF000000000B6E0000FE
+:1017600000000003E7CF2C00000000082200001B4F
+:101770000000000C695200000000000C29800000ED
+:10178000000000188000FEEF000000002A000000AA
+:10179000000000100866000500000000066600005A
+:1017A000000000008661180000000009026000F0DF
+:1017B00000000010B60C0802000000188000FEE8CF
+:1017C000000000000682000000000010B18F000041
+:1017D00000000008878F00010000000C73660010F5
+:1017E000000000082C800018000000082D000018E0
+:1017F000000000082D8000020000000C5FBF000008
+:101800000000001091DE000000000018000D000034
+:10181000000000002A00000000000010286601F50A
+:10182000000000082C800003000000082D000003C9
+:10183000000000093060FFF0000000082D8000016A
+:101840000000000C298000000000001091DE000064
+:10185000000000082C80001A000000082D00001A6B
+:101860000000000573660000000000082D800002E3
+:1018700000000000318000000000001091DE000038
+:10188000000000082C80000C000000082D00000C57
+:10189000000000082D800004000000188000FECC2D
+:1018A0000000001800020000000000188000FECABE
+:1018B000000000002A00000000000010001F0000CF
+:1018C0000000000C6BD70001000000000F0080003A
+:1018D000000000080F800007000000188000001BB7
+:1018E00000000000280A00000000000005020000BF
+:1018F000000000082200000900000000290000008C
+:101900000000000F6568001000000003F66C9400F2
+:1019100000000010B972A0040000000C73E7001969
+:101920000000000C21420004000000003CF8000010
+:101930000000000C2980000000000010205300006F
+:1019400000000008220000080000000C61420004B2
+:1019500000000018000A000000000000050200005E
+:101960000000000C61420000000000100142000372
+:101970000000000C33E7001D0000000C6142000273
+:1019800000000018000A0000000000002A0000000B
+:1019900000000010001F00000000000C6BD70001C9
+:1019A0000000000F0F470007000000080F8000082C
+:1019B0000000000C2980000000000010001F000043
+:1019C0000000000C6BD70001000000188000FEA68C
+:1019D0000000000033510000000000002A00000059
+:1019E00000000010B1C600290000000F0F500007D2
+:1019F000000000000A600000000000000AE1000092
+:101A00000000000F4B620008000000090B1600FFE9
+:101A10000000000F4C620010000000000D6200008A
+:101A2000000000090D1A00FF00000010075000031D
+:101A30000000000C0D1A00080000000C0B16000836
+:101A4000000000000CC60000000000000B80000039
+:101A50000000000006980000000000102056000062
+:101A60000000000C2BD70001000000080F800003CD
+:101A70000000001006C200040000000C2900000253
+:101A800000000010264200020000000C2952000352
+:101A9000000000082200000100000010001F0000EC
+:101AA0000000000C6BD7000100000000231B0000A9
+:101AB0000000000027111A000000000066900000DE
+:101AC0000000000C2952000000000010B197320CF9
+:101AD0000000000C298000000000000006980000B3
+:101AE00000000010205300000000000C29520003E9
+:101AF0000000000022C58C0000000010001F000044
+:101B00000000000C6BD70001000000102056000000
+:101B10000000000C2BD70001000000080F8000031C
+:101B2000000000188000FFEF00000010B1C8001393
+:101B300000000010B1C600030000000C2980000066
+:101B400000000010205300000000000C295200008B
+:101B50000000000C295200030000001006C2000221
+:101B60000000000C295200020000000022C58C0079
+:101B700000000000276500000000000026E40000CF
+:101B8000000000082200001600000010B1C600038B
+:101B9000000000002348000000000010B180000594
+:101BA00000000000234800000000000C2980000015
+:101BB0000000000F0F500007000000188000001206
+:101BC00000000008220000160000000C2980000020
+:101BD00000000000301400000000000030950000FC
+:101BE0000000001007500003000000090B1600FF62
+:101BF000000000090D1A00FF0000000F3116000858
+:101C0000000000003162340000000003F162300087
+:101C100000000010205F0000000000002C510000B8
+:101C2000000000092CD1007F000000082CD9000022
+:101C3000000000082D000000000000082D80000CAE
+:101C400000000000000000000000001091DE000015
+:101C50000000001005C20005000000080F8000070A
+:101C6000000000003300000000000010001F000012
+:101C70000000000C6BD70001000000188000FE502F
+:101C8000000000002A0000000000000F0F500007B5
+:101C900000000010B1C600300000000F47420008ED
+:101CA00000000009070E000F00000008070E0008E2
+:101CB00000000010001F00000000000C6BD70001A6
+:101CC00000000008090000010000000709121C00C4
+:101CD00000000003CBCA9200000000000B97A20096
+:101CE0000000000742171C00000000000B04000069
+:101CF0000000000F0A840003000000000A959C0009
+:101D0000000000004A009A00000000088212000152
+:101D1000000000010C170800000000000C978C0068
+:101D20000000000002180000000000080D00FFFF86
+:101D3000000000080F8000060000000C29000000D1
+:101D40000000001006C200040000000C295200022E
+:101D500000000010264200020000000C295200037F
+:101D6000000000082200000100000010001F000019
+:101D70000000000C6BD7000100000010B197320D7D
+:101D800000000000231B00000000000027110800D5
+:101D900000000000669000000000000C2980000098
+:101DA0000000000002180000000000102053000096
+:101DB0000000000C295200030000000022C536007C
+:101DC00000000010001F00000000000C6BD7000195
+:101DD000000000080F800006000000188000FFF2DD
+:101DE00000000000231B0000000000002711080075
+:101DF000000000006690000000000010B1C8000B59
+:101E00000000000C2980000000000010205300009A
+:101E10000000000C295200000000000C29520003B1
+:101E20000000001006C200020000000C295200024F
+:101E30000000000022C58C000000000027650000A3
+:101E40000000000026E4000000000000234800001D
+:101E500000000008220000170000000C298000008C
+:101E600000000010001F00000000000C6BD70001F4
+:081E7000000000188000FE11C3
+:00000001FF
+/*
+ * This file contains firmware data derived from proprietary unpublished
+ * source code, Copyright (c) 2004 - 2009 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware data
+ * in hexadecimal or equivalent format, provided this copyright notice is
+ * accompanying it.
+ */
diff --git a/firmware/bnx2x-e1-4.8.53.0.fw.ihex b/firmware/bnx2x-e1-4.8.53.0.fw.ihex
deleted file mode 100644
index f1edb1e..0000000
--- a/firmware/bnx2x-e1-4.8.53.0.fw.ihex
+++ /dev/null
@@ -1,10364 +0,0 @@
-:10000000000028600000006000000630000028C8E2
-:100010000000160800002F000000009400004510AA
-:10002000000073C8000045A8000000C40000B978B3
-:100030000000A4680000BA400000007400015EB037
-:100040000000559000015F28000000B80001B4C016
-:100050000000D1F80001B580000000040002878094
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000060400CC0000000418
-:10010000020400DC00100000020400E012140000F1
-:10011000020400E422140000020400E8321400008B
-:10012000060400EC000000040104012400000000AB
-:1001300001040128000000000104012C000000005F
-:10014000010401300000000002040004000000FF70
-:1001500002040008000000FF0204000C000000FF81
-:1001600002040010000000FF02040014000000FF61
-:1001700002040018000000FF0204001C000000FF41
-:1001800002040020000000FF020400240000003EE2
-:1001900002040028000000000204002C0000003FC0
-:1001A000020400300000003F020400340000003F61
-:1001B00002040038000000000204003C0000003F80
-:1001C000020400400000003F020400440000003F21
-:1001D00002042008000004110204200C00000400A6
-:1001E000020420100000040402042014000004197A
-:1001F0000204201C0000FFFF020420200000FFFF7B
-:10020000020420240000FFFF020420280000FFFF5A
-:1002100006042038000000020204204000000034E0
-:100220000204204400000035060420480000007C41
-:100230000204223807FFFFFF0204223C0000003FB7
-:100240000204224007FFFFFF020422440000000FC7
-:1002500001042248000000000104224C00000000BC
-:10026000010422500000000001042254000000009C
-:1002700001042258000000000104225C000000007C
-:10028000010422600000000001042264000000005C
-:1002900001042268000000000104226C000000003C
-:1002A000010422700000000001042274000000001C
-:1002B00001042278000000000104227C00000000FC
-:1002C000020424BC000000010C042000000003E82C
-:1002D0000A042000000000010B0420000000000AB6
-:1002E0000205004400000020020500480000003222
-:1002F000020500900215002002050094021500205E
-:1003000002050098000000300205009C0810000063
-:10031000020500A000000033020500A40000003028
-:10032000020500A800000031020500AC0000000238
-:10033000020500B000000005020500B40000000640
-:10034000020500B800000002020500BC0000000227
-:10035000020500C000000000020500C40000000506
-:10036000020500C800000002020500CC00000002E7
-:10037000020500D000000002020500D400000001C8
-:1003800002050114000000010205011C000000012B
-:100390000205012000000002020502040000000125
-:1003A0000205020C0000004002050210000000409F
-:1003B0000205021C000000200205022000000013BC
-:1003C0000205022400000020060502400000000A89
-:1003D0000405028000200000020500500000000714
-:1003E0000205005400000007020500580000000844
-:1003F0000205005C00000008060500600000000423
-:10040000020500D800000006020500E00000000D13
-:10041000020500E40000002D020500E800000007CE
-:10042000020500EC00000027020500F000000007B4
-:10043000020500F400000027020500F80000000794
-:10044000020500FC00000027020500040000000176
-:1004500002050008000000010205000C0000000178
-:100460000205001000000001020500140000000158
-:1004700002050018000000010205001C0000000138
-:100480000205002000000001020500240000000118
-:1004900002050028000000010205002C00000001F8
-:1004A00002050030000000010205003400000001D8
-:1004B00002050038000000010205003C00000001B8
-:1004C00002050040000000010406100002000020A8
-:1004D000020600DC00000001010600D80000000058
-:1004E0000406020000030220020600DC00000000F7
-:1004F00002060068000000B802060078000001143F
-:10050000010600B800000000010600C8000000005D
-:100510000206006C000000B80206007C0000011416
-:10052000010600BC00000000010600CC0000000035
-:100530000718040000930000081807600014022345
-:10054000071C0000324F0000071C800033250C946C
-:10055000071D00000E4D195E081D1E005C4002259F
-:100560000118000000000000011800040000000055
-:1005700001180008000000000118000C0000000035
-:100580000118001000000000011800140000000015
-:1005900002180020000000010218002400000002E0
-:1005A00002180028000000030218002C00000000C0
-:1005B000021800300000000402180034000000019E
-:1005C00002180038000000000218003C0000000182
-:1005D000021800400000000402180044000000005F
-:1005E00002180048000000010218004C000000033F
-:1005F0000218005000000000021800540000000122
-:1006000002180058000000040218005C00000000FE
-:1006100002180060000000010218006400000003DE
-:1006200002180068000000000218006C00000001C1
-:10063000021800700000000402180074000000009E
-:1006400002180078000000040218007C000000037B
-:100650000618008000000002021800A400003FFFFE
-:10066000021800A8000003FF021802240000000086
-:1006700002180234000000000218024C00000000C2
-:10068000021802E4000000FF061810000000040039
-:10069000021B8BC000000001021B80000000003420
-:1006A000021B804000000018021B80800000000C2C
-:1006B000021B80C0000000200C1B83000007A1204B
-:1006C0000A1B8300000001380B1B83000000138805
-:1006D000021B83C0000001F4061A2000000000B2D3
-:1006E000061A23C8000000C1041A26CC0001022704
-:1006F000061A1020000000C8061A100000000002B0
-:10070000061A1C1800000004061A1C100000000243
-:10071000061A080000000002061A0808000000027D
-:10072000061A081000000004041A1FB00004022872
-:10073000041A4CB00008022C061A22C8000000203F
-:10074000061A40000000016C021A4B600000000015
-:10075000061A14000000000A061A145000000006D1
-:10076000061A150000000002041A150800050234DC
-:10077000061A151C00000007061A1570000000126A
-:10078000061A09C00000004C061A0800000000020A
-:10079000061A08200000000E041A1FB000020239D9
-:1007A000061A290800000002061A2348000000204B
-:1007B000061A45B00000016C021A4B6400000000EC
-:1007C000061A14280000000A061A14680000000621
-:1007D000061A153800000002041A15400005023BF5
-:1007E000061A155400000007061A15B8000000127A
-:1007F000061A0AF00000004C061A08080000000261
-:10080000061A08580000000E041A1FB80002024021
-:10081000061A2910000000020200A2800000000158
-:100820000200A294071D29110200A29800000000F6
-:100830000200A29C009C04240200A2A00000000070
-:100840000200A2A4000002090200A4FCFF000000B4
-:10085000020100B400000001020100B80000000124
-:10086000020100DC000000010201010000000001A3
-:1008700002010104000000010201007C00300000C0
-:1008800002010084000000280201008C000000002A
-:1008900002010130000000040201025C00000001BE
-:1008A000020103280000000002010554000000308E
-:1008B000020100C400000001020100CC00000001A0
-:1008C000020100F800000001020100F00000000138
-:1008D00002010080003000000201008800000028B2
-:1008E0000201009000000000020101340000000439
-:1008F000020102DC000000010201032C00000000E4
-:100900000201056400000030020100C8000000017F
-:10091000020100D000000001020100FC0000000103
-:10092000020100F400000001020C10000000002091
-:10093000020C200800000A11020C200C00000A0022
-:10094000020C201000000A04020C201C0000FFFF13
-:10095000020C20200000FFFF020C20240000FFFFFB
-:10096000020C20280000FFFF020C2038000000C607
-:10097000020C203C00000000020C2040000000346B
-:10098000020C204400000035060C20480000001C2A
-:10099000020C20B800000001060C20BC0000005F23
-:1009A000020C223807FFFFFF020C223C0000003F30
-:1009B000020C224007FFFFFF020C22440000000F40
-:1009C000010C224800000000010C224C0000000035
-:1009D000010C225000000000010C22540000000015
-:1009E000010C225800000000010C225C00000000F5
-:1009F000010C226000000000010C226400000000D5
-:100A0000010C226800000000010C226C00000000B4
-:100A1000010C227000000000010C22740000000094
-:100A2000010C227800000000010C227C0000000074
-:100A3000020C24BC000000010C0C2000000003E8A4
-:100A40000A0C2000000000010B0C20000000000A2E
-:100A5000020C400800000A11020C400C00000A00C1
-:100A6000020C401000000A04020C401400000A218D
-:100A7000020C401C0000FFFF020C40200000FFFFA2
-:100A8000020C40240000FFFF020C40280000FFFF82
-:100A9000020C403800000046020C403C00000005FB
-:100AA000020C404000000034020C404400000035BD
-:100AB000060C40480000005C020C41B80000000138
-:100AC000060C41BC0000001F020C423807FFFFFF6C
-:100AD000020C423C0000003F020C424007FFFFFFB7
-:100AE000020C42440000000F010C424800000000CC
-:100AF000010C424C00000000010C425000000000BC
-:100B0000010C425400000000010C4258000000009B
-:100B1000010C425C00000000010C4260000000007B
-:100B2000010C426400000000010C4268000000005B
-:100B3000010C426C00000000010C4270000000003B
-:100B4000010C427400000000010C4278000000001B
-:100B5000010C427C00000000010C428000000000FB
-:100B6000020C44C0000000010C0C4000000003E82F
-:100B70000A0C4000000000010B0C40000000000ABD
-:100B8000020D004400000032020D008C021500200E
-:100B9000020D009002150020020D009408100000C4
-:100BA000020D009800000033020D009C00000002BE
-:100BB000020D00A000000000020D00A400000005CE
-:100BC000020D00A800000005060D00AC00000002A8
-:100BD000020D00B400000002020D00B80000000386
-:100BE000020D00BC00000002020D00C00000000168
-:100BF000020D00C800000002020D00CC000000023F
-:100C0000020D010800000001020D015C000000015E
-:100C1000020D016400000001020D016800000002E5
-:100C2000020D020400000001020D020C0000002071
-:100C3000020D021000000040020D021400000040EE
-:100C4000020D022000000003020D02240000001823
-:100C5000060D028000000012040D03000024024271
-:100C6000020D004C00000001020D005000000002C7
-:100C7000020D005400000008020D0058000000089A
-:100C8000060D005C00000004020D00C4000000041A
-:100C9000020D011400000009020D011800000029D6
-:100CA000020D011C0000000A020D01200000002AB4
-:100CB000020D012400000007020D0128000000279A
-:100CC000020D012C00000007020D0130000000277A
-:100CD000020D01340000000C020D01380000002C50
-:100CE000020D013C0000000C020D01400000002C30
-:100CF000020D01440000000C020D01480000002C10
-:100D0000020D000400000001020D000800000001B7
-:100D1000020D000C00000001020D00100000000197
-:100D2000020D001400000001020D00180000000177
-:100D3000020D001C00000001020D00200000000157
-:100D4000020D002400000001020D00280000000137
-:100D5000020D002C00000001020D00300000000117
-:100D6000020D003400000001020D003800000001F7
-:100D7000020D003C00000001020E004C0000003299
-:100D8000020E009402150020020E009802150020A9
-:100D9000020E009C00000030020E00A008100000AF
-:100DA000020E00A400000033020E00A80000003074
-:100DB000020E00AC00000031020E00B00000000284
-:100DC000020E00B400000004020E00B80000000093
-:100DD000020E00BC00000002020E00C00000000273
-:100DE000020E00C400000000020E00C80000000255
-:100DF000020E00CC00000007020E00D0000000022E
-:100E0000020E00D400000002020E00D80000000113
-:100E1000020E00E400000001020E01440000000187
-:100E2000020E014C00000001020E01500000000201
-:100E3000020E020400000001020E020C000000403D
-:100E4000020E021000000040020E021C000000040E
-:100E5000020E022000000020020E02240000000EFC
-:100E6000020E02280000001B060E03000000001204
-:100E7000040E0280001B0266020E005400000010E7
-:100E8000020E005800000007020E005C0000000F78
-:100E9000020E006000000010060E00640000000456
-:100EA000020E00DC00000003020E01100000000F23
-:100EB000020E01140000002F020E01180000000EA7
-:100EC000020E011C0000002E020E000400000001B2
-:100ED000020E000800000001020E000C00000001DC
-:100EE000020E001000000001020E001400000001BC
-:100EF000020E001800000001020E001C000000019C
-:100F0000020E002000000001020E0024000000017B
-:100F1000020E002800000001020E002C000000015B
-:100F2000020E003000000001020E0034000000013B
-:100F3000020E003800000001020E003C000000011B
-:100F4000020E004000000001020E004400000001FB
-:100F50000730040000C30000083007680013028156
-:100F600007340000314C00000734800035EF0C548A
-:100F700007350000361319D00735800007112755B3
-:100F800008358EE04E24028301300000000000008E
-:100F900001300004000000000130000800000000E3
-:100FA0000130000C000000000130001000000000C3
-:100FB0000130001400000000023000200000000199
-:100FC000023000240000000202300028000000036C
-:100FD0000230002C0000000002300030000000044D
-:100FE0000230003400000001023000380000000030
-:100FF0000230003C0000000102300040000000040C
-:1010000002300044000000000230004800000001EF
-:101010000230004C000000030230005000000000CD
-:1010200002300054000000010230005800000004AB
-:101030000230005C0000000002300060000000018F
-:10104000023000640000000302300068000000006D
-:101050000230006C0000000102300070000000044B
-:10106000023000740000000002300078000000042C
-:101070000230007C00000003063000800000000207
-:10108000023000A400003FFF023000A8000003FF70
-:101090000230022400000000023002340000000090
-:1010A0000230024C00000000023002E40000FFFFAA
-:1010B000063020000000080002338BC00000000151
-:1010C000023380000000001A023380400000004E0E
-:1010D0000233808000000010023380C00000002036
-:1010E0000C3383000007A1200A338300000001387D
-:1010F0000B33830000001388023383C0000001F427
-:101100000C3383801DCD65000A3383800004C4B492
-:101110000B338380004C4B4006325000000000C26D
-:1011200006321020000000C8063210000000000245
-:101130000632464000000040063257F0000000042E
-:10114000063257D800000005043257EC0001028532
-:1011500006321C60000000200432283000020286A3
-:10116000023308000100000004330C000010028864
-:10117000023308000000000004330C400010029805
-:1011800006321400000000A0063219000000001012
-:10119000063219800000003006324740000000B4DB
-:1011A00002321D900000000006321B4000000004C7
-:1011B00006321B6000000020063253180000009821
-:1011C00006321680000000A0063219400000001010
-:1011D00006321A400000003006324A10000000B407
-:1011E00002321D940000000006321B500000000473
-:1011F00006321BE0000000200632557800000098FF
-:10120000072004000071000008200780001002A8D9
-:1012100007240000322900000724800023630C8B80
-:101220000824C930654002AA012000000000000027
-:101230000120000400000000012000080000000060
-:101240000120000C00000000012000100000000040
-:101250000120001400000000022000200000000116
-:1012600002200024000000020220002800000003E9
-:101270000220002C000000000220003000000004CA
-:1012800002200034000000010220003800000000AD
-:101290000220003C00000001022000400000000489
-:1012A000022000440000000002200048000000016D
-:1012B0000220004C0000000302200050000000004B
-:1012C0000220005400000001022000580000000429
-:1012D0000220005C0000000002200060000000010D
-:1012E00002200064000000030220006800000000EB
-:1012F0000220006C000000010220007000000004C9
-:1013000002200074000000000220007800000004A9
-:101310000220007C00000003062000800000000284
-:10132000022000A400003FFF022000A8000003FFED
-:10133000022002240000000002200234000000000D
-:101340000220024C00000000022002E40000FFFF27
-:10135000062020000000080002238BC000000001CE
-:1013600002238000000000100223804000000012D1
-:101370000223808000000030022380C00000000EA5
-:10138000022383C0000001F4062250000000004246
-:1013900006221020000000C80622100000000002F3
-:1013A00006222000000000C00622307000000080ED
-:1013B0000622428000000004062225C000000240F0
-:1013C00004222EC8000802AC02230800013FFFFFE0
-:1013D00004230C00001002B40223080000000000E7
-:1013E00004230C40001002C406221400000000A0D8
-:1013F00006221900000000100622198000000030AB
-:101400000222511800000000062223000000000EF6
-:1014100006223040000000060622241000000030A2
-:1014200006221680000000A00622194000000010CD
-:1014300006221A40000000300222511C0000000069
-:10144000062223380000000E062230580000000655
-:10145000062224D0000000300216100000000020F8
-:1014600002170008000000020217002C0000000311
-:101470000217003C000000040217004400000008AE
-:1014800002170048000000020217004C0000009004
-:1014900002170050000000900217005400800090D6
-:1014A0000217005808140000021700600000008AAC
-:1014B000021700640000008002170068000000901E
-:1014C0000217006C00000080021700700000000688
-:1014D00002170078000007D00217007C0000076C9C
-:1014E00002170038007C1004021700040000000FEF
-:1014F0000616402400000002021640700000001C86
-:10150000021642080000000102164210000000010D
-:1015100002164220000000010216422800000001CD
-:10152000021642300000000102164238000000019D
-:1015300002164260000000010C16401C0003D0900F
-:101540000A16401C0000009C0B16401C000009C439
-:101550000216403000000008021640340000000C63
-:10156000021640380000001002164044000000201F
-:101570000216400000000001021640D800000001E1
-:1015800002164008000000010216400C0000000195
-:101590000216401000000001021642400000000048
-:1015A00002164248000000000616427000000002C9
-:1015B00002164250000000000216425800000000CF
-:1015C00006164280000000020216600800000614A1
-:1015D0000216600C000006000216601000000604EF
-:1015E0000216601C0000FFFF021660200000FFFFD3
-:1015F000021660240000FFFF021660280000FFFFB3
-:1016000002166038000000200216603C0000002036
-:1016100002166040000000340216604400000035ED
-:1016200002166048000000230216604C00000024EF
-:1016300002166050000000250216605400000026CB
-:1016400002166058000000270216605C00000029A6
-:10165000021660600000002A021660640000002B81
-:10166000021660680000002C0216606C0000002D5D
-:101670000616607000000052021661B800000001FA
-:10168000061661BC0000001F0216623807FFFFFF4C
-:101690000216623C0000003F0216624007FFFFFF97
-:1016A000021662440000000F0116624800000000AC
-:1016B0000116624C0000000001166250000000009C
-:1016C000011662540000000001166258000000007C
-:1016D0000116625C0000000001166260000000005C
-:1016E000011662640000000001166268000000003C
-:1016F0000116626C0000000001166270000000001C
-:1017000001166274000000000116627800000000FB
-:101710000116627C00000000021664BC000000019B
-:101720000C166000000003E80A16600000000001CB
-:101730000B1660000000000A021680400000000640
-:101740000216804400000005021680480000000ACE
-:101750000216804C000000050216805400000002B2
-:10176000021680CC00000004021680D000000004A5
-:10177000021680D400000004021680D80000000485
-:10178000021680DC00000004021680E00000000465
-:10179000021680E400000004021680E80000000445
-:1017A0000216880400000004021680300000007C4D
-:1017B000021680340000003D021680380000003F11
-:1017C0000216803C0000009C021680F0000000071A
-:1017D000061680F4000000050216880C01010101C4
-:1017E00002168108000000000216810C00000004AF
-:1017F000021681100000000402168114000000028D
-:101800000216881008012004021681180000000545
-:101810000216811C00000005021681200000000550
-:1018200002168124000000050216882C20081001F1
-:1018300002168128000000080216812C0000000614
-:1018400002168130000000070216813400000000FB
-:1018500002168830010101200616813800000004BC
-:1018600002168834010101010616814800000004B7
-:101870000216883801010101061681580000000493
-:101880000216883C01010101061681680000000370
-:101890000216817400000001021688400101010156
-:1018A00002168178000000010216817C0000000110
-:1018B00002168180000000010216818400000001F0
-:1018C000021688440101010102168188000000010E
-:1018D0000216818C000000040216819000000004B2
-:1018E00002168194000000020216884808012004B4
-:1018F00002168198000000050216819C0000000578
-:10190000021681A000000005021681A40000000557
-:101910000216881420081001021681A80000000891
-:10192000021681AC00000006021681B0000000071C
-:10193000021681B40000000102168818010101207E
-:10194000021681B800000001021681BC00000001EF
-:10195000021681C000000001021681C400000001CF
-:101960000216881C01010101021681C80000000155
-:10197000021681CC00000001021681D00000000197
-:10198000021681D400000001021688200101010125
-:10199000021681D800000001021681DC000000015F
-:1019A000021681E000000001021681E4000000013F
-:1019B0000216882401010101021681E800000001DD
-:1019C000021681EC00000001021681F00000000107
-:1019D000021688280101010102168240FFFF003F24
-:1019E00006168244000000020216824CFFFF003FF0
-:1019F000021682500000010002168254000001000D
-:101A0000061682580000000202168260000000C024
-:101A100002168264000000C00216826800001E00E8
-:101A20000216826C00001E00021682700000400048
-:101A300002168274000040000216827800008000C6
-:101A40000216827C000080000216828000002000C6
-:101A5000021682840000200006168288000000071B
-:101A6000021682A400000001061682A80000000AE7
-:101A7000021681F400000C08021681F800000040F4
-:101A8000021681FC00000100021682000000002006
-:101A9000021682040000001702168208000000806F
-:101AA0000216820C000002000216821000000000E4
-:101AB00002168218FFFF01FF02168214FFFF01FFCA
-:101AC0000216823C00000013021680900000013FC5
-:101AD0000216806000000140021680640000014090
-:101AE000061680680000000202168070000000C028
-:101AF00006168074000000070216809C0000004853
-:101B0000021680A000000048061680A40000000213
-:101B1000021680AC00000048061680B000000007E6
-:101B2000021682380000800002168234000025E48C
-:101B30000216809400007FFF02168220000000073A
-:101B40000216821C00000007021682280000000016
-:101B500002168224FFFFFFFF021682300000000001
-:101B60000216822CFFFFFFFF021680EC000000FF30
-:101B700002140000000000010214000C000000012B
-:101B800002140040000000010214004400007FFF26
-:101B90000214000C0000000002140000000000000D
-:101BA0000214006C00000000021400040000000198
-:101BB00002140030000000010214000400000000C4
-:101BC0000214005C00000000021400080000000184
-:101BD000021400340000000102140008000000009C
-:101BE00002140060000000000202005800000032F1
-:101BF000020200A003150020020200A40315002029
-:101C0000020200A801000030020200AC081000002F
-:101C1000020200B000000033020200B400000030F5
-:101C2000020200B800000031020200BC0000000304
-:101C3000020200C000000006020200C4000000030F
-:101C4000020200C800000003020200CC00000002F3
-:101C5000020200D000000000020200D400000002D6
-:101C6000020200DC00000000020200E000000006AA
-:101C7000020200E400000004020200E8000000028A
-:101C8000020200EC00000002020200F0000000016D
-:101C9000020200FC00000006020201200000000019
-:101CA0000202013400000002020201B00000000143
-:101CB0000202020C000000010202021400000001F6
-:101CC00002020218000000020202040400000001E7
-:101CD0000202040C00000040020204100000004058
-:101CE0000202041C00000004020204200000002084
-:101CF0000202042400000002020204280000001F67
-:101D0000060205000000001204020480001F02D435
-:101D1000020200600000000F0202006400000007E1
-:101D2000020200680000000B0202006C0000000EBE
-:101D30000602007000000004020200F4000000042B
-:101D4000020200040000000102020008000000017D
-:101D50000202000C0000000102020010000000015D
-:101D6000020200140000000102020018000000013D
-:101D70000202001C0000000102020020000000011D
-:101D800002020024000000010202002800000001FD
-:101D90000202002C000000010202003000000001DD
-:101DA00002020034000000010202003800000001BD
-:101DB0000202003C0000000102020040000000019D
-:101DC000020200440000000102020048000000017D
-:101DD0000202004C0000000102020050000000015D
-:101DE00002020108000000C80202011800000002FF
-:101DF000020201C400000000020201CC0000000049
-:101E0000020201D400000002020201DC0000000214
-:101E1000020201E4000000FF020201EC000000FFEA
-:101E20000202010C000000C80202011C00000002B6
-:101E3000020201C800000000020201D00000000000
-:101E4000020201D800000002020201E000000002CC
-:101E5000020201E8000000FF020201F0000000FFA2
-:101E60000728040000B5000008280768001302F3E3
-:101E7000072C000033660000072C800038B30CDA12
-:101E8000072D00003BB11B07072D80002A2629F4EF
-:101E9000082DD6C0452802F50128000000000000EA
-:101EA00001280004000000000128000800000000D4
-:101EB0000128000C000000000128001000000000B4
-:101EC000012800140000000002280020000000018A
-:101ED000022800240000000202280028000000035D
-:101EE0000228002C0000000002280030000000043E
-:101EF0000228003400000001022800380000000021
-:101F00000228003C000000010228004000000004FC
-:101F100002280044000000000228004800000001E0
-:101F20000228004C000000030228005000000000BE
-:101F3000022800540000000102280058000000049C
-:101F40000228005C00000000022800600000000180
-:101F5000022800640000000302280068000000005E
-:101F60000228006C0000000102280070000000043C
-:101F7000022800740000000002280078000000041D
-:101F80000228007C000000030628008000000002F8
-:101F9000022800A400003FFF022800A8000003FF61
-:101FA0000228022400000000022802340000000081
-:101FB0000228024C00000000022802E40000FFFF9B
-:101FC0000628200000000800022B8BC00000000142
-:101FD000022B800000000000022B8040000000184F
-:101FE000022B80800000000C022B80C000000066E5
-:101FF0000C2B83000007A1200A2B8300000001386E
-:102000000B2B830000001388022B83C0000001F417
-:102010000C2B8340000001F40A2B834000000000D9
-:102020000B2B8340000000050A2B83800004C4B4FE
-:102030000C2B83801DCD65000B2B8380004C4B4007
-:10204000062A3D6000000004042A3D70000202F7E9
-:10205000062A300000000048062A1020000000C8B0
-:10206000062A100000000002062A31280000008E17
-:10207000022A336800000000042A3370000202F9CB
-:10208000042A3B90000402FB042A3E20000202FFC7
-:10209000022A151800000001022A18300000000072
-:1020A000022A183800000000042A18200002030148
-:1020B000062A4AC000000002062A4B000000000465
-:1020C000042A1F4800020303022B0800000000003E
-:1020D000042B0C0000100305022B08000100000077
-:1020E000042B0C4000080315022B0800020000001E
-:1020F000042B0C600008031D062A3BA000000014FE
-:10210000062A3C4000000024062A14000000000AB1
-:10211000062A145000000006062A3378000000FC4E
-:10212000022A3B5800000000042A3D7800020325E3
-:10213000042A3D8800100327022A15000000000031
-:10214000022A150800000001062A502000000002A3
-:10215000062A503000000002062A5000000000024B
-:10216000062A501000000002022A50400000000021
-:10217000062A50480000000E022A50B80000000154
-:10218000042A4AC800020337062A4B100000004206
-:10219000062A4D2000000004062A3BF0000000142F
-:1021A000062A3CD000000024062A14280000000A59
-:1021B000062A146800000006062A3768000000FCA2
-:1021C000022A3B5C00000000042A3D800002033923
-:1021D000042A3DC80010033B022A15040000000039
-:1021E000022A150C00000001062A502800000002F7
-:1021F000062A503800000002062A5008000000029B
-:10220000062A501800000002022A50440000000074
-:10221000062A50800000000E022A50BC0000000177
-:10222000042A4AD00002034B062A4C180000004240
-:10223000062A4D30000000040210100800000001C2
-:10224000021010000003D000021010040000003D36
-:10225000091018000200034D091011000020054D5F
-:102260000610118000000002091011880006056D9B
-:10227000061011A00000001806102400000000E065
-:102280000210201C000000000210202000000001AD
-:10229000021020C000000001021020040000000114
-:1022A000021020080000000109103C000005057321
-:1022B00009103C2000050578091038000005057D4F
-:1022C00002104028000000100210404400003FFFB0
-:1022D0000210405800280000021040840084924AF6
-:1022E0000210405800000000061080680000000442
-:1022F00002108000000010800610802800000002FC
-:102300000210803800000010021080400000FFFF23
-:10231000021080440000FFFF021080500000000007
-:102320000210810000000000061081200000000261
-:1023300002108008000002B50210801000000000AA
-:10234000061082000000004A021081080001FFFF11
-:1023500006108140000000020210800000001A8078
-:102360000610900000000024061091200000004A92
-:10237000061093700000004A061095C00000004A45
-:10238000021080040000108006108030000000025F
-:102390000210803C00000010021080480000FFFF87
-:1023A0000210804C0000FFFF02108054000000006B
-:1023B00002108104000000000610812800000002C5
-:1023C0000210800C000002B5021080140000000012
-:1023D000061084000000004A0210810C0001FFFF7B
-:1023E00006108148000000020210800400001A80DC
-:1023F0000610909000000024061092480000004A49
-:10240000061094980000004A061096E80000004A62
-:102410000212049000E383400212051400003C10F5
-:1024200002120494FFFFFFFF02120498FFFFFFFF58
-:102430000212049CFFFFFFFF021204A0FFFFFFFF38
-:10244000021204A4FFFFFFFF021204A8FFFFFFFF18
-:10245000021204ACFFFFFFFF021204B0FFFFFFFFF8
-:10246000021204B8FFFFFFFF021204BCFFFFFFFFD0
-:10247000021204C0FFFFFFFF021204C4FFFFFFFFB0
-:10248000021204C8FFFFFFFF021204CCFFFFFFFF90
-:10249000021204D0FFFFFFFF021204DCFFFFFFFF68
-:1024A000021204E0FFFFFFFF021204E4FFFFFFFF40
-:1024B000021204E8FFFFFFFF021204ECFFFFFFFF20
-:1024C000021204F0FFFFFFFF021204F4FFFFFFFF00
-:1024D000021204F8FFFFFFFF021204FCFFFFFFFFE0
-:1024E00002120500FFFFFFFF02120504FFFFFFFFBE
-:1024F00002120508FFFFFFFF0212050CFFFFFFFF9E
-:1025000002120510FFFFFFFF021204D4FFFF333059
-:10251000021204D8FFFF3340021204B4F00030006E
-:1025200002120390000000080212039C0000000841
-:10253000021203A000000008021203A4000000021F
-:10254000021203BC00000004021203C000000005D8
-:10255000021203C400000004021203D000000000B5
-:102560000212036C00000001021203680000003F29
-:10257000021201BC00000040021201C00000180855
-:10258000021201C400000803021201C8000008037F
-:10259000021201CC00000040021201D00000000332
-:1025A000021201D400000803021201D8000008033F
-:1025B000021201DC00000803021201E00001000326
-:1025C000021201E400000803021201E800000803FF
-:1025D000021201EC00000003021201F000000003EF
-:1025E000021201F400000003021201F800000003CF
-:1025F000021201FC000000030212020000000003AE
-:10260000021202040000000302120208000000038C
-:102610000212020C0000000302120210000000036C
-:10262000021202140000000302120218000000034C
-:102630000212021C0000000302120220000000032C
-:1026400002120224000000030212022800002403E8
-:102650000212022C0000002F0212023000000009BA
-:102660000212023400000019021202380000018434
-:102670000212023C00000183021202400000030625
-:102680000212024400000019021202480000000673
-:102690000212024C00000306021202500000030660
-:1026A00002120254000003060212025800000C86B7
-:1026B0000212025C00000306021202600000030620
-:1026C0000212026400000006021202680000000606
-:1026D0000212026C000000060212027000000006E6
-:1026E00002120274000000060212027800000006C6
-:1026F0000212027C000000060212028000000006A6
-:102700000212028400000006021202880000000685
-:102710000212028C00000006021202900000000665
-:102720000212029400000006021202980000000645
-:102730000212029C00000006021202A00000030622
-:10274000021202A400000013021202A800000006F8
-:10275000021202B000001004021202B400001004C1
-:102760000212032400106440021203280010644087
-:10277000021201B0000000010600A00000000016D7
-:102780000200A06CBF5C00000200A070FFF51FEF0C
-:102790000200A0740000FFFF0200A078500003E0D8
-:1027A0000200A07C000000000200A0800000A00049
-:1027B0000600A084000000050200A0980FE00000C1
-:1027C0000600A09C000000140200A0EC555400007C
-:1027D0000200A0F0555555550200A0F400005555D3
-:1027E0000200A0F8000000000200A0FC5554000008
-:1027F0000200A100555555550200A1040000555591
-:102800000200A108000000000200A22C000000004D
-:102810000600A230000000030200A06000000007D4
-:102820000200A10CBF5C00000200A110FFF51FEF29
-:102830000200A1140000FFFF0200A118500003E0F5
-:102840000200A11C000000000200A1200000A00066
-:102850000600A124000000050200A1380FE00000DE
-:102860000600A13C000000140200A18C5554000099
-:102870000200A190555555550200A19400005555F0
-:102880000200A198000000000200A19C5554000025
-:102890000200A1A0555555550200A1A400005555B0
-:1028A0000200A1A8000000000200A23C00000000FD
-:1028B0000600A240000000030200A0640000000720
-:1028C00000000000000000000000002E00000000DA
-:1028D00000000000000000000000000000000000F8
-:1028E00000000000000000000000000000000000E8
-:1028F00000000000000000000000000000000000D8
-:1029000000000000000000000000000000000000C7
-:1029100000000000000000000000000000000000B7
-:10292000002E005000000000000000000000000029
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000050008DAA
-:102950000000000000000000000000000000000077
-:102960000000000000000000000000000000000067
-:102970000000000000000000008D00920092009610
-:102980000096009A00000000000000000000000017
-:102990000000000000000000000000000000000037
-:1029A00000000000009A00DB00DB00E900E900F70E
-:1029B0000000000000000000000000000000000017
-:1029C0000000000000000000000000000000000007
-:1029D00000000000000000000000000000000000F7
-:1029E00000000000000000000000000000000000E7
-:1029F00000000000000000000000000000000000D7
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A800000F700FE00000000000000000000000051
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD000000000000000000000FE01030103010EE1
-:102AE000010E0119000000000000000000000000BD
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B200000000000000000000000000000000000A5
-:102B30000119011A00000000000000000000000060
-:102B40000000000000000000000000000000000085
-:102B5000000000000000000000000000011A013E1B
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000000000000000000013E016400000000A1
-:102B90000000000000000000000000000000000035
-:102BA0000000000000000000000000000000000025
-:102BB00000000000016401A300000000000000000C
-:102BC0000000000000000000000000000000000005
-:102BD00000000000000000000000000000000000F5
-:102BE00001A301DE00000000000000000000000062
-:102BF00000000000000000000000000000000000D5
-:102C000000000000000000000000000001DE0224BF
-:102C10000224022C022C02340000000000000000FC
-:102C200000000000000000000000000000000000A4
-:102C300000000000000000000234027102710278FE
-:102C40000278027F00000000000000000000000089
-:102C50000000000000000000000000000000000074
-:102C600000000000027F0280000000000000000061
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000000000000000000044
-:102C9000028002920000000000000000000000001E
-:102CA0000000000000000000000000000000000024
-:102CB000000000000000000000000000029202A7D7
-:102CC00002A702AA02AA02AD000000000000000054
-:102CD00000000000000000000000000000000000F4
-:102CE000000000000000000002AD02DB0000000058
-:102CF00000000000000000000000000000000000D4
-:102D000000000000000000000000000000000000C3
-:102D10000000000002DB0362000000000000000071
-:102D200000000000000000000000000000000000A3
-:102D30000000000000000000000000000000000093
-:102D4000036203690369036D036D037100000000F2
-:102D50000000000000000000000000000000000073
-:102D6000000000000000000000000000037103B03C
-:102D700003B003B803B803C0000000000000000067
-:102D80000000000000000000000000000000000043
-:102D9000000000000000000003C004130413042717
-:102DA0000427043B000000000000000000000000B9
-:102DB0000000000000000000000000000000000013
-:102DC00000000000043B044300000000000000007D
-:102DD00000000000000000000000000000000000F3
-:102DE00000000000000000000000000000000000E3
-:102DF000044304490000000000000000000000003F
-:102E000000000000000000000000000000000000C2
-:102E10000000000000000000000000000449044C15
-:102E200000000000000000000000000000000000A2
-:102E30000000000000000000000000000000000092
-:102E40000000000000000000044C045100000000DD
-:102E50000000000000000000000000000000000072
-:102E60000000000000000000000000000000000062
-:102E70000000000004510452045204640464047607
-:102E80000000000000000000000000000000000042
-:102E90000000000000000000000000000000000032
-:102EA000047604E3000000000000000000000000C1
-:102EB0000000000000000000000000000000000012
-:102EC00000000000000000000000000004E304E433
-:102ED00004E404F804F8050C000000000000000001
-:102EE00000000000000000000000000000000000E2
-:102EF00000000000000000000000000000000000D2
-:102F000000010000000204C00003098000040E401C
-:102F100000051300000617C000071C8000082140B0
-:102F200000092600000A2AC0000B2F80000C344044
-:102F3000000D3900000E3DC0000F428000104740D8
-:102F400000114C00001250C00013558000145A406C
-:102F500000155F00001663C00017688000186D4000
-:102F600000197200001A76C0001B7B80001C804094
-:102F7000001D8500001E89C0001F8E800020934028
-:102F80000000200000004000000060000000800001
-:102F90000000A0000000C0000000E00000010000F0
-:102FA00000012000000140000001600000018000DD
-:102FB0000001A0000001C0000001E00000020000CC
-:102FC00000022000000240000002600000028000B9
-:102FD0000002A0000002C0000002E00000030000A8
-:102FE0000003200000034000000360000003800095
-:102FF0000003A0000003C0000003E0000004000084
-:103000000004200000044000000460000004800070
-:103010000004A0000004C0000004E000000500005F
-:10302000000520000005400000056000000580004C
-:103030000005A0000005C0000005E000000600003B
-:103040000006200000064000000660000006800028
-:103050000006A0000006C0000006E0000007000017
-:103060000007200000074000000760000007800004
-:103070000007A0000007C0000007E00000080000F3
-:1030800000082000000840000008600000088000E0
-:103090000008A0000008C0000008E00000090000CF
-:1030A00000092000000940000009600000098000BC
-:1030B0000009A0000009C0000009E000000A0000AB
-:1030C000000A2000000A4000000A6000000A800098
-:1030D000000AA000000AC000000AE000000B000087
-:1030E000000B2000000B4000000B6000000B800074
-:1030F000000BA000000BC000000BE000000C000063
-:10310000000C2000000C4000000C6000000C80004F
-:10311000000CA000000CC000000CE000000D00003E
-:10312000000D2000000D4000000D6000000D80002B
-:10313000000DA000000DC000000DE000000E00001A
-:10314000000E2000000E4000000E6000000E800007
-:10315000000EA000000EC000000EE000000F0000F6
-:10316000000F2000000F4000000F6000000F8000E3
-:10317000000FA000000FC000000FE00000100000D2
-:1031800000102000001040000010600000108000BF
-:103190000010A0000010C0000010E00000110000AE
-:1031A000001120000011400000116000001180009B
-:1031B0000011A0000011C0000011E000001200008A
-:1031C0000012200000124000001260000012800077
-:1031D0000012A0000012C0000012E0000013000066
-:1031E0000013200000134000001360000013800053
-:1031F0000013A0000013C0000013E0000014000042
-:10320000001420000014400000146000001480002E
-:103210000014A0000014C0000014E000001500001D
-:10322000001520000015400000156000001580000A
-:103230000015A0000015C0000015E00000160000F9
-:1032400000162000001640000016600000168000E6
-:103250000016A0000016C0000016E00000170000D5
-:1032600000172000001740000017600000178000C2
-:103270000017A0000017C0000017E00000180000B1
-:10328000001820000018400000186000001880009E
-:103290000018A0000018C0000018E000001900008D
-:1032A000001920000019400000196000001980007A
-:1032B0000019A0000019C0000019E000001A000069
-:1032C000001A2000001A4000001A6000001A800056
-:1032D000001AA000001AC000001AE000001B000045
-:1032E000001B2000001B4000001B6000001B800032
-:1032F000001BA000001BC000001BE000001C000021
-:10330000001C2000001C4000001C6000001C80000D
-:10331000001CA000001CC000001CE000001D0000FC
-:10332000001D2000001D4000001D6000001D8000E9
-:10333000001DA000001DC000001DE000001E0000D8
-:10334000001E2000001E4000001E6000001E8000C5
-:10335000001EA000001EC000001EE000001F0000B4
-:10336000001F2000001F4000001F6000001F8000A1
-:10337000001FA000001FC000001FE0000020000090
-:10338000002020000020400000206000002080007D
-:103390000020A0000020C0000020E000002100006C
-:1033A0000021200000214000002160000021800059
-:1033B0000021A0000021C0000021E0000022000048
-:1033C0000022200000224000002260000022800035
-:1033D0000022A0000022C0000022E0000023000024
-:1033E0000023200000234000002360000023800011
-:1033F0000023A0000023C0000023E0000024000000
-:1034000000242000002440000024600000248000EC
-:103410000024A0000024C0000024E00000250000DB
-:1034200000252000002540000025600000258000C8
-:103430000025A0000025C0000025E00000260000B7
-:1034400000262000002640000026600000268000A4
-:103450000026A0000026C0000026E0000027000093
-:103460000027200000274000002760000027800080
-:103470000027A0000027C0000027E000002800006F
-:10348000002820000028400000286000002880005C
-:103490000028A0000028C0000028E000002900004B
-:1034A0000029200000294000002960000029800038
-:1034B0000029A0000029C0000029E000002A000027
-:1034C000002A2000002A4000002A6000002A800014
-:1034D000002AA000002AC000002AE000002B000003
-:1034E000002B2000002B4000002B6000002B8000F0
-:1034F000002BA000002BC000002BE000002C0000DF
-:10350000002C2000002C4000002C6000002C8000CB
-:10351000002CA000002CC000002CE000002D0000BA
-:10352000002D2000002D4000002D6000002D8000A7
-:10353000002DA000002DC000002DE000002E000096
-:10354000002E2000002E4000002E6000002E800083
-:10355000002EA000002EC000002EE000002F000072
-:10356000002F2000002F4000002F6000002F80005F
-:10357000002FA000002FC000002FE000003000004E
-:10358000003020000030400000306000003080003B
-:103590000030A0000030C0000030E000003100002A
-:1035A0000031200000314000003160000031800017
-:1035B0000031A0000031C0000031E0000032000006
-:1035C00000322000003240000032600000328000F3
-:1035D0000032A0000032C0000032E00000330000E2
-:1035E00000332000003340000033600000338000CF
-:1035F0000033A0000033C0000033E00000340000BE
-:1036000000342000003440000034600000348000AA
-:103610000034A0000034C0000034E0000035000099
-:103620000035200000354000003560000035800086
-:103630000035A0000035C0000035E0000036000075
-:103640000036200000364000003660000036800062
-:103650000036A0000036C0000036E0000037000051
-:10366000003720000037400000376000003780003E
-:103670000037A0000037C0000037E000003800002D
-:10368000003820000038400000386000003880001A
-:103690000038A0000038C0000038E0000039000009
-:1036A00000392000003940000039600000398000F6
-:1036B0000039A0000039C0000039E000003A0000E5
-:1036C000003A2000003A4000003A6000003A8000D2
-:1036D000003AA000003AC000003AE000003B0000C1
-:1036E000003B2000003B4000003B6000003B8000AE
-:1036F000003BA000003BC000003BE000003C00009D
-:10370000003C2000003C4000003C6000003C800089
-:10371000003CA000003CC000003CE000003D000078
-:10372000003D2000003D4000003D6000003D800065
-:10373000003DA000003DC000003DE000003E000054
-:10374000003E2000003E4000003E6000003E800041
-:10375000003EA000003EC000003EE000003F000030
-:10376000003F2000003F4000003F6000003F80001D
-:10377000003FA000003FC000003FE000003FE0012C
-:1037800000000000000001FF0000020000007FF8C0
-:1037900000007FF8000002920000350000000001E8
-:1037A0000000000300BEBC200000000300BEBC20DF
-:1037B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
-:1037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
-:1037D000FFFFFFFF00000000FFFFFFFF00000000F1
-:1037E000FFFFFFFF0000000300BEBC20FFFFFFFF44
-:1037F00000000000FFFFFFFF00000000FFFFFFFFD1
-:103800000000000300BEBC2000002000000040C0FB
-:1038100000006180000082400000A3000000C3C0DF
-:103820000000E4800001054000012600000146C0C0
-:1038300000016780000188400001A9000001C9C0A3
-:103840000001EA8000020B4000022C0000024CC084
-:1038500000026D8000028E400002AF000002CFC067
-:103860000002F0800003114000033200000352C048
-:1038700000037380000394400003B5000003D5C02B
-:103880000003F6800004174000043800000458C00C
-:103890000004798000049A40000080000001038049
-:1038A0000001870000020A8000028E0000031180E0
-:1038B000000395000004188000049C0000051F8090
-:1038C0000005A300000626800006AA0000072D8040
-:1038D0000007B100000834800008B80000093B80F0
-:1038E0000009BF00000A4280000AC600000B4980A0
-:1038F000000BCD00000C5080000CD400000D578050
-:10390000000DDB0000007FF800007FF8000003E5F9
-:10391000000015000000190000000000FFFFFFFF7D
-:103920004000000040000000400000004000000097
-:103930004000000040000000400000004000000087
-:103940004000000040000000400000004000000077
-:103950004000000040000000400000004000000067
-:103960004000000040000000400000004000000057
-:103970004000000040000000400000004000000047
-:103980004000000040000000400000004000000037
-:103990004000000040000000400000004000000027
-:1039A00000007FF800007FF8000003C80000150049
-:1039B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
-:1039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
-:1039D00040000000400000004000000040000000E7
-:1039E00040000000400000004000000040000000D7
-:1039F00040000000400000004000000040000000C7
-:103A000040000000400000004000000040000000B6
-:103A100040000000400000004000000040000000A6
-:103A20004000000040000000400000004000000096
-:103A30004000000040000000400000004000000086
-:103A40004000000040000000400000004000000076
-:103A500000001000000020800000310000004180C4
-:103A600000005200000062800000730000008380AC
-:103A7000000094000000A4800000B5000000C58094
-:103A80000000D6000000E6800000F700000107807B
-:103A90000001180000012880000139000001498060
-:103AA00000015A0000016A8000017B0000018B8048
-:103AB00000019C000001AC800001BD000001CD8030
-:103AC0000001DE000001EE800001FF0000007FF831
-:103AD00000007FF800000207000035001000000021
-:103AE000000028AD000000000001000100350804BE
-:103AF000CCCCCCC1FFFFFFFFFFFFFFFF7058103C95
-:103B000000000000CCCC0201CCCCCCCC00000000EA
-:103B1000FFFFFFFF400000004000000040000000E9
-:103B20004000000040000000400000004000000095
-:103B30004000000040000000400000004000000085
-:103B40004000000040000000400000004000000075
-:103B50004000000040000000400000004000000065
-:103B60004000000040000000400000004000000055
-:103B70004000000040000000400000004000000045
-:103B80004000000040000000400000004000000035
-:103B900040000000000E01B7011600D60000FFFF34
-:103BA000000000000000FFFF000000000000FFFF19
-:103BB000000000000000FFFF000000000000FFFF09
-:103BC000000000000000FFFF000000000000FFFFF9
-:103BD000000000000000FFFF0000000000100000D7
-:103BE00000000000007201BB012300F30000FFFF92
-:103BF000000000000000FFFF000000000000FFFFC9
-:103C0000000000000000FFFF000000000000FFFFB8
-:103C1000000000000000FFFF000000000000FFFFA8
-:103C2000000000000000FFFF000000000010000086
-:103C300000000000FFFFFFF3320FFFFF0C30C30C4A
-:103C4000C30C30C3CF3CF300F3CF3CF30000CF3CB8
-:103C5000CDCDCDCDFFFFFFF130EFFFFF0C30C30C1A
-:103C6000C30C30C3CF3CF300F3CF3CF30001CF3C97
-:103C7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C85
-:103C8000C30C30C3CF3CF300F3CF3CF30002CF3C76
-:103C9000CDCDCDCDFFFFF4061CBFFFFF0C30C3051B
-:103CA000C30C30C3CF300014F3CF3CF30004CF3C3F
-:103CB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C59
-:103CC000C30C30C3CF3CF300F3CF3CF30008CF3C30
-:103CD000CDCDCDCDFFFFFFFA302FFFFF0C30C30C51
-:103CE000C30C30C3CF3CF300F3CF3CF30010CF3C08
-:103CF000CDCDCDCDFFFFFFF731EFFFFF0C30C30C73
-:103D0000C30C30C3CF3CF300F3CF3CF30020CF3CD7
-:103D1000CDCDCDCDFFFFFFF5302FFFFF0C30C30C15
-:103D2000C30C30C3CF3CF300F3CF3CF30040CF3C97
-:103D3000CDCDCDCDFFFFFFF3310FFFFF0C30C30C16
-:103D4000C30C30C3CF3CF300F3CF3CF30000CF3CB7
-:103D5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF8
-:103D6000C30C30C3CF3CF300F3CF3CF30001CF3C96
-:103D7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C84
-:103D8000C30C30C3CF3CF300F3CF3CF30002CF3C75
-:103D9000CDCDCDCDFFFFF4061CBFFFFF0C30C3051A
-:103DA000C30C30C3CF300014F3CF3CF30004CF3C3E
-:103DB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C58
-:103DC000C30C30C3CF3CF300F3CF3CF30008CF3C2F
-:103DD000CDCDCDCDFFFFFFFA302FFFFF0C30C30C50
-:103DE000C30C30C3CF3CF300F3CF3CF30010CF3C07
-:103DF000CDCDCDCDFFFFFFF730EFFFFF0C30C30C73
-:103E0000C30C30C3CF3CF300F3CF3CF30020CF3CD6
-:103E1000CDCDCDCDFFFFFFF5304FFFFF0C30C30CF4
-:103E2000C30C30C3CF3CF300F3CF3CF30040CF3C96
-:103E3000CDCDCDCDFFFFFFF331EFFFFF0C30C30C35
-:103E4000C30C30C3CF3CF300F3CF3CF30000CF3CB6
-:103E5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF7
-:103E6000C30C30C3CF3CF300F3CF3CF30001CF3C95
-:103E7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C83
-:103E8000C30C30C3CF3CF300F3CF3CF30002CF3C74
-:103E9000CDCDCDCDFFFFF4061CBFFFFF0C30C30519
-:103EA000C30C30C3CF300014F3CF3CF30004CF3C3D
-:103EB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C57
-:103EC000C30C30C3CF3CF300F3CF3CF30008CF3C2E
-:103ED000CDCDCDCDFFFFFFFA302FFFFF0C30C30C4F
-:103EE000C30C30C3CF3CF300F3CF3CF30010CF3C06
-:103EF000CDCDCDCDFFFFFF97056FFFFF0C30C30C7D
-:103F0000C30C30C3CF3CC000F3CF3CF30020CF3C08
-:103F1000CDCDCDCDFFFFFFF5310FFFFF0C30C30C32
-:103F2000C30C30C3CF3CF300F3CF3CF30040CF3C95
-:103F3000CDCDCDCDFFFFFFF3320FFFFF0C30C30C13
-:103F4000C30C30C3CF3CF300F3CF3CF30000CF3CB5
-:103F5000CDCDCDCDFFFFFFF1310FFFFF0C30C30CF6
-:103F6000C30C30C3CF3CF300F3CF3CF30001CF3C94
-:103F7000CDCDCDCDFFFFFFF6305FFFFF0C30C30C82
-:103F8000C30C30C3CF3CF300F3CF3CF30002CF3C73
-:103F9000CDCDCDCDFFFFF4061CBFFFFF0C30C30518
-:103FA000C30C30C3CF300014F3CF3CF30004CF3C3C
-:103FB000CDCDCDCDFFFFFFF2304FFFFF0C30C30C56
-:103FC000C30C30C3CF3CF300F3CF3CF30008CF3C2D
-:103FD000CDCDCDCDFFFFFF8A042FFFFF0C30C30CEA
-:103FE000C30C30C3CF3CC000F3CF3CF30010CF3C38
-:103FF000CDCDCDCDFFFFFF9705CFFFFF0C30C30C1C
-:10400000C30C30C3CF3CC000F3CF3CF30020CF3C07
-:10401000CDCDCDCDFFFFFFF5310FFFFF0C30C30C31
-:10402000C30C30C3CF3CF300F3CF3CF30040CF3C94
-:10403000CDCDCDCDFFFFFFF3300FFFFF0C30C30C14
-:10404000C30C30C3CF3CF300F3CF3CF30000CF3CB4
-:10405000CDCDCDCDFFFFFFF1300FFFFF0C30C30CF6
-:10406000C30C30C3CF3CF300F3CF3CF30001CF3C93
-:10407000CDCDCDCDFFFFFFF6305FFFFF0C30C30C81
-:10408000C30C30C3CF3CF300F3CF3CF30002CF3C72
-:10409000CDCDCDCDFFFFF4061CBFFFFF0C30C30517
-:1040A000C30C30C3CF300014F3CF3CF30004CF3C3B
-:1040B000CDCDCDCDFFFFFFF2304FFFFF0C30C30C55
-:1040C000C30C30C3CF3CF300F3CF3CF30008CF3C2C
-:1040D000CDCDCDCDFFFFFFFA302FFFFF0C30C30C4D
-:1040E000C30C30C3CF3CF300F3CF3CF30010CF3C04
-:1040F000CDCDCDCDFFFFFF97040FFFFF0C30C30CDC
-:10410000C30C30C3CF3CC000F3CF3CF30020CF3C06
-:10411000CDCDCDCDFFFFFFF5300FFFFF0C30C30C31
-:10412000C30C30C3CF3CF300F3CF3CF30040CF3C93
-:10413000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C47
-:10414000C30C30C3CF3CF3CCF3CF3CF30000CF3CE7
-:10415000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C27
-:10416000C30C30C3CF3CF3CCF3CF3CF30001CF3CC6
-:10417000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C07
-:10418000C30C30C3CF3CF3CCF3CF3CF30002CF3CA5
-:10419000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE7
-:1041A000C30C30C3CF3CF3CCF3CF3CF30004CF3C83
-:1041B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC7
-:1041C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5F
-:1041D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA7
-:1041E000C30C30C3CF3CF3CCF3CF3CF30010CF3C37
-:1041F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C87
-:10420000C30C30C3CF3CF3CCF3CF3CF30020CF3C06
-:10421000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C66
-:10422000C30C30C3CF3CF3CCF3CF3CF30040CF3CC6
-:10423000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C46
-:10424000C30C30C3CF3CF3CCF3CF3CF30000CF3CE6
-:10425000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C26
-:10426000C30C30C3CF3CF3CCF3CF3CF30001CF3CC5
-:10427000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C06
-:10428000C30C30C3CF3CF3CCF3CF3CF30002CF3CA4
-:10429000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE6
-:1042A000C30C30C3CF3CF3CCF3CF3CF30004CF3C82
-:1042B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC6
-:1042C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5E
-:1042D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA6
-:1042E000C30C30C3CF3CF3CCF3CF3CF30010CF3C36
-:1042F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C86
-:10430000C30C30C3CF3CF3CCF3CF3CF30020CF3C05
-:10431000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C65
-:10432000C30C30C3CF3CF3CCF3CF3CF30040CF3CC5
-:10433000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C45
-:10434000C30C30C3CF3CF3CCF3CF3CF30000CF3CE5
-:10435000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C25
-:10436000C30C30C3CF3CF3CCF3CF3CF30001CF3CC4
-:10437000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C05
-:10438000C30C30C3CF3CF3CCF3CF3CF30002CF3CA3
-:10439000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CE5
-:1043A000C30C30C3CF3CF3CCF3CF3CF30004CF3C81
-:1043B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CC5
-:1043C000C30C30C3CF3CF3CCF3CF3CF30008CF3C5D
-:1043D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CA5
-:1043E000C30C30C3CF3CF3CCF3CF3CF30010CF3C35
-:1043F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C85
-:10440000C30C30C3CF3CF3CCF3CF3CF30020CF3C04
-:10441000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C64
-:10442000C30C30C3CF3CF3CCF3CF3CF30040CF3CC4
-:10443000CDCDCDCD0010000000070100000281703D
-:10444000000B81980002025000010270000F0280F0
-:1044500000010370000800000008008000028100D5
-:10446000000B8128000201E0000102000007021099
-:1044700000020280000F0000000800F000028170BE
-:10448000000B81980002025000010270000B828034
-:1044900000080338001000000008010000028180BD
-:1044A000000B81A80002026000018280000E829849
-:1044B0000008038000028000000B8028000200E05A
-:1044C000000101000000811000000118CCCCCCCC10
-:1044D000CCCCCCCCCCCCCCCCCCCCCCCC000020002C
-:1044E000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC0C
-:1044F00000002000CCCCCCCCCCCCCCCCCCCCCCCC0C
-:10450000CCCCCCCC0000200000000000000000005B
-:104510001F8B08000000000000FFFB51CFC0F0031C
-:104520008A45D91918FC3811FCA18059981918D856
-:10453000809803883D80B8819181A1919178FDDABE
-:10454000620876BF3003C36E20E611029A23821000
-:104550009F0254F306C85F0F15B312656038263A00
-:10456000F07EA706DE2A8D29364512C1DE86451E5D
-:10457000196F4793FF2289CADF4140FF40632965D5
-:1045800054BE9D22845EA604A1A5D1E4EDA1F2D77C
-:10459000A1FE9251C66EEE0DA83C00F85C49656024
-:1045A00003000000000000001F8B08000000000056
-:1045B00000FFED7D0B7854D5B5F03E73CE9C994944
-:1045C000CE4C4E4212F2224C1288A0210CAF808AAF
-:1045D0007F270122F539202858D40142087983D455
-:1045E0004BAFEDCD8424101135F447058B76885000
-:1045F000D1A20D34D260C10E20147B6D6FF0FAC0D1
-:10460000EAF50B4841312FB1207EC5CBBFD6DAE7A2
-:1046100064E64C2680D8DBAFFFFFFDB4B8D9E7ECE9
-:10462000B3F7DAEBB5D75A7BED3D92750293BFC76E
-:10463000D845FC03E54F4D8CB109C1F26766F680A1
-:104640002787B1C9BDFE3A473C63556D193BA29D12
-:104650008C25EC9921142850FED5232C5082DFBFE5
-:1046600065C397F0FFB619423E7C97D0E911E6C3C7
-:10467000FBE4D5026B873A939C310CEA8CB9194B59
-:10468000642C6B12A33F224B8D82FFE07325398F80
-:10469000B134FC2774754661AEC078C6321E535CD7
-:1046A000D4D0A93815783F847FC6D2BC25B731074E
-:1046B00063CF03BCC971F0BC5A3ADE61E5EF2EC28C
-:1046C000DFA1F33A6ACD58AE303E7732A789654113
-:1046D000BF3EE3F3AC46633D9BD9E34F46C33FEC9B
-:1046E000CC7E518C308F13B18C013CCB540E2F6398
-:1046F000BDB26754101F9B6A58A2322C580F2F85E9
-:1047000065873356035E97ED165C16F8FE396C2FFD
-:1047100031E6D7BE6BD6EA153E5962A3A10404B5B3
-:10472000E4F4EF6711CBBF11F1FE302BA0B24AEADF
-:10473000955580AFAA5A76FB95FEED673389E8540C
-:1047400029B9F65B61FCDE5AE66A86F19799D502D3
-:10475000AC2FFB91D3E5837A6663472183FAD03689
-:10476000818919C1EFAF009EDB917F001E2A2BA526
-:10477000DE420674ECDD2BB0E60C1C87F7BB6C77D1
-:1047800006F3650C0CE758662638E732413A89741F
-:10479000713007D2C1BC24F38942A8CE54DCF3B0F7
-:1047A0007F9FE29D87EDF4E7490BE638BD0057F2A5
-:1047B0005066A057B1B53A9D653256EA692944BEA4
-:1047C00038B5EC8D5558029E1324C0F77C8BA70892
-:1047D000FBA998579DCD80A7E659188D3FB42DFFB2
-:1047E0003309F80CBAF3C5C4213F31763C844FF04D
-:1047F000CFF1115A5D1C98DE972B8BB01F09F10584
-:104800007217011F3F42A026E0284D543A57FC2959
-:104810006BD8A0D0FA5B59C3C66900E511BC0C3F48
-:1048200061AC4308E54BBD1CBA3BFFB0943B303C48
-:10483000FFD3F30474127EAB00B7C81F1576D9BF3F
-:1048400012F861CAABE6C0F7803F2A360B7E0BD464
-:104850004DAFDBE87DF7265E0FD86537F24FD716F0
-:10486000A80BF0BDA5FDF11B91BF5E155933763B3A
-:1048700022CA84FAE5A4063B1B0F75C047B18D57C9
-:104880002B36EFBB1FBF2F69B3301BF457B17BF141
-:104890001D37427DF16133C326155B6BE514A82FEC
-:1048A000F10B2D58EF29E0F0F97689FEADD0BEC7A7
-:1048B000D19E381BE873BAC6CA9C326375F6F6C43B
-:1048C00059C067A5FE1D85F85DE976C185689FF230
-:1048D000EAD643C938AF17B97C976D8B664E1D7FFA
-:1048E000F0F764AB18F81EBC5F06F364D0EF62D635
-:1048F00054887AB062EB3AD9690FE2EB748D4AE3DF
-:10490000F4C9DF8B300E7C57F98AE0C229569A9899
-:1049100017E5B07BB76DCEF30ACEAF56CEB6E3BC8B
-:1049200056CBD86EB17FFE2E54CDA5FECD7221BCE4
-:104930002FDDB4592E0E91DBB26D838C706DC81AC9
-:10494000EC8D20D7417880D7B283F552D403A80FDD
-:1049500025BF3C2384CF2A8558E2CBB26D22731A3F
-:10496000F888D3DDF72EFC13F0E5DB6B27BCEA7487
-:10497000EBD3A71ADDCEA81A1DA5DEBC1911F8F8D5
-:1049800071A403C0D384788272AD069F6332CB9743
-:10499000A07F879BA902BB3C5F3699D97C0663F553
-:1049A000B007DDD2F55097D952E682F550FAB17BC7
-:1049B0002AD49304EF67389F7AC15BC2D7AB9624A1
-:1049C0000FE07995C0E6E0FC8F21D030AF55C9C02B
-:1049D0009F80F7A66979CF8B82067B3CD68B7FB10F
-:1049E0002683FA3943FD98A19FACCBF7A3164E322C
-:1049F000F4A31696E8FDFC8DFAB15D593F4D85375D
-:104A000018E1292CD5FB910468576FBFB279A937FB
-:104A10004F36C2737339F5133BD5C5BC0AAEE71ADE
-:104A20003FB076B708EF95EDB163D7B050BE2850D0
-:104A30000580DB0E5212CA173193A20C7C18EB8E44
-:104A400033D4A127F5E47541FD138895697C394578
-:104A500026BD909F62A5FA43290AE985876EF05E1C
-:104A600083EB208ECD92A12E7B47AB11F81AE01478
-:104A7000581296601724F57FBFDACCF150907A2156
-:104A8000FB187C5F65EACD8E85FA35A6FC6B116F4D
-:104A90002E81EBE528915563BB280B23FDB43A2307
-:104AA000EF795F089E1A8700FD8560BF8D666F12E3
-:104AB000F2D7F8DA677C12C0B76A08CC2705BA12B9
-:104AC0009E09F8603D5A3DA43809F1699141BE4301
-:104AD000C79761FC1C1AFF06C4A31BC74FE83FBE63
-:104AE000257392617C6B7A89617CAB0CE303BF4FC9
-:104AF000AD6DD6C607FCDDC0D834A199C6B7A49762
-:104B0000D0F8AB655662183FAA6FFC5B70FE9E81C1
-:104B1000E69F798371FEE9A5C6F9CB7CFEB36A5F97
-:104B2000D2C68FA2F9CF165EE2F34F2FE5F3B7F0AE
-:104B30007EFBC677F4E1FF5E9CBF7780F12D599331
-:104B40008DF31F5A6E9CBF858F5F54BB531B5FA1B3
-:104B5000F117093BF9FC8796D3F8B2C5EB423E92B8
-:104B600053A3AAFD684FA481400C261DE5A672043C
-:104B70001805A01F860A9904C743519CEFCE450132
-:104B8000BF29417DC7FC2051A0CF2A359E2FDB9E37
-:104B90002FA39EA5F7896837F13F456D22AD376C8D
-:104BA000BDC53F1CE0ED6E137D582F5A7F935FA467
-:104BB000F58EDBE560C605F0F95F9E1CD51C3AAFAB
-:104BC000F0725193F96487418E383CBE0236A21AC6
-:104BD000E06B47269810AC9F043D0AC62F3B0E7A27
-:104BE00014CB53666E8F9C003DCBE450B9A9E5F61B
-:104BF000888FBD9303F3BA5B83FFA4C4F17D72B9C0
-:104C0000E047FC9F5BB75446FDB4A8098CE91079D6
-:104C1000AFD2E8D4BBDBE26F16089F4EC4CF3D2471
-:104C20008A8CFD9766D72FDE30C8F0DD3CE66F48F2
-:104C300082F60BD7CE1FA2C2FC7F30C73216ED53CF
-:104C400090845413C9314B35816F31A7759D391547
-:104C50002AF7CC311BECFAB95E63FD0725C67AB79B
-:104C6000D96F36A1BDB144609BA1DFFBAA8DEFF5E2
-:104C7000713609719CAEDA7877277278EFC3722C9F
-:104C80003E5689AEF7ABFC5B1D9EAA87CD2C40EB50
-:104C9000654702433AFA12C85EF3AA7CDEE1F0DE11
-:104CA0006FB6BA3D00CFFD3F12099FE1F077BC1E01
-:104CB000ED36811DD7B1E14B33DAB7E1F30987FF58
-:104CC0008115E1F35165D4F7F37DE1CF399F84F38A
-:104CD00053555BFEA01321ED2A5ABE3FE844087FDE
-:104CE000956D9B61A82FF1CF35B45FBC61BEE1FD2E
-:104CF000A2A62586F70B1B971AEAF37D3F32B47FF5
-:104D00006045ADE1FD7DD58F18DEFFA0649DA13E1D
-:104D1000D7BBD1D0FE9E399B0DEF4DAF8FBC13E5B5
-:104D2000A8EE5D91E1BA715639F938DA836715C991
-:104D300085F4F8B42689E4E0748D93CAEEB6715612
-:104D40002FD783C50C4C9C5EE19CAF7132EA65465F
-:104D5000FAF3AFC2059F0FEA7F139C843F7183CCA7
-:104D600002C0C2028BEBE3E35E31E47DC765DE6F18
-:104D700000411FD7FFBDD811F97955F3FCA16A0492
-:104D8000FF2128B72C15D7B91E6D7D0F7F5F2E3000
-:104D90004FE873C656929CD769EB4CB9CCF541F9F4
-:104DA000CEE402F4BFCBE54076F5A5C66B01A4A224
-:104DB0009E44EB3C01F901A4C0C02F5906F9EEDC7A
-:104DC00027125C95A81340AFAE639EC126D43381F1
-:104DD00003E9778D4238DC49546F4BA075BDB3664B
-:104DE000FAA01312D2C743E5A73573A83C59E3A52F
-:104DF000F2444D0995C76BAAA9ECA85941E5C735FE
-:104E00003E2A3FAA69A4F2CF354D541EADD940E5E4
-:104E10007B357E2ABB6BDC54F6F92BBAFE8DD7ECC2
-:104E200055CDAF809587EA67B4B9D443DB769273EA
-:104E30005712CAF919E55C36DAE3678E8263993155
-:104E400030BEC2F96D603ABAC95E29F603FDC7F5F6
-:104E50007F6F8BE274B299D87470A6D923C37FE1B7
-:104E60005A9043750959061624D70C7B847E61ED50
-:104E7000437A5D8E4ECCDD9B3B13E871F299BFE522
-:104E800061BF75DAFA177540A47598059E7721BD44
-:104E900042F046EB5AEFAB9ABEBF0CFEBAFAF0D71F
-:104EA0009E8EFEFB4141A5FECFB45A988478DC1358
-:104EB000ED07E667670E3FEF40795C9664524F441A
-:104EC000C0835E56B464A84AE8FAD366AC9F691200
-:104ED000A6B7D07AEC8C99350AF94A554F0C43FAAB
-:104EE0002751A9F7B32C49564F80BC9EDE9615C3B7
-:104EF000D76F3F5F07B7C712BF825F48EDFFDEF095
-:104F00000CD48F0E0F63ADEC132BEA037897F5EDFD
-:104F1000FD7226FD95E2576C8FF91CDA0B16F87BB3
-:104F200091E20712D5F57EAB5A449F65343EDF6EA1
-:104F3000180FBE73EA3EF7C5CC4BF1ADC44E86C424
-:104F400011D669F1C6B26D36D5B8AEC41AEA556D40
-:104F5000C9AA619DC17F80FCB36A4142BE29D7B80E
-:104F6000A847521A0580AFDCE4A47EAB04DEAEC2D3
-:104F7000DA217BE151572BA7DB40F09DAE39EC9451
-:104F800040DE4BACE001027C252D23A7A29EEB6AFC
-:104F9000AD4B447BB04C3CF39027C2F73B4D028DA8
-:104FA000B7C46FEE35AEA31A7F30E8577F4E7E163A
-:104FB000534E86D43B4DDCCE0EEFF780D6EFE5F0B6
-:104FC00053B9FD48E18DCEFE78AA6CFB42F6921CE7
-:104FD000C1FFF28278D2F1576EF21C407D5ABAEDD1
-:104FE00018D9A39F9A7DD90F5F423FF59F9F9244A6
-:104FF00071527D5E3E3029619C055A7C17F8F79E00
-:105000000F613DFDECDFCD6C0DC0C72E402B786FDE
-:10501000D65F331333417DA1565BD05A4671DDCF45
-:105020004CDC8E2A621E07D18135E5A11DD9C54C05
-:10503000D3114F5DEC6DC7B8103A9C32C9A4671606
-:10504000361AED18B07F0DF5C51B8CF5623633119D
-:10505000F549F17A33F30B343FC3FBF74D2AE17F77
-:1050600031AB5E85EBAAA4F9230B5426A5027C156F
-:10507000BF79366F3EC65F4CDC0FD1E3234BE2387D
-:10508000FCA5F17ED90DEF3F691D77F78D48068BA2
-:105090007F15C689580C736D65FDF1FB6DE10F87B7
-:1050A000575FAFFBC5693438C46D82DB1F817F2F2A
-:1050B000687CA6EBEB5B44D5E017DC8DF510BF21D7
-:1050C00046D4E2B2221391EE5DAAD5678AA1F71405
-:1050D000B7F7EDB4B8EA80DE3F3779068913C84EDA
-:1050E000C86521ED7E6EF2D2F34EE1AD62B45B99FC
-:1050F00014C8453B14D618E25359E30731CA918BC3
-:10510000F1663B837514E86F41F8A09F55F692DB7A
-:10511000582EC6BB41DEA1BFC71C858705A8DB94FE
-:105120005686FD59928CF17C9BD358AFC27F201DCF
-:1051300046308A3F458F90C2F01860A80FED2EE3ED
-:10514000F351E88491DD1F203E76108B43695502B0
-:10515000228CCF26499D7DFE5626FA7B1C7E8A2F07
-:1051600040FBE52A6F5FA9C5CF977F503038EE121C
-:10517000FAA8EA3C68904121753DBE7F5E62FE71EF
-:10518000DF416F3A61550DD19B734DDE69480FD4F5
-:1051900093089F00E3780D76609A1A2AE70BC2F80D
-:1051A000E3AAE1886706FD5D6EF2DE2D26F487E353
-:1051B000AAFB4FEAD7FF8248F3BCEAFE87F5EBBFB4
-:1051C0003252FF15BF7979970FF8A9F4574F3A80FB
-:1051D00099D9675253A20BE85EBEB5C18172F9A995
-:1051E000E473205D3FF38BD323C9E71651974FB784
-:1051F00022E411FF101F9D7EE9D13BD0AE3AB7D516
-:10520000AC527C609B256001A6AC6C5DC2E5639BE3
-:10521000E518AFAFFE02F9B3AACDA82F4A5F7832E6
-:1052200011E3CD4049CD7F0E907F50B9E52F8568C1
-:105230007755B15ED27BE1DFE1F8E7E3C81E982F36
-:10524000C7F47FAFEFF3556978A96A7DF40B9184B9
-:10525000A583FCCDF0F6259ABDFFA4688FA738DFA3
-:10526000443611F94CC707F3737BBFEEC5A7738FA4
-:10527000013C9D5BFEDD21E484F227D77B675A1653
-:10528000FEFC35E7C0F2D40D7A31D4AED6D76767CD
-:105290009BE6A7ECE165B939E0403FB07CB3D9E5C6
-:1052A00043BABEFCFC2F9EC1B8CC0716D770E8BF2E
-:1052B000ECE583EFDD00F5B21DE6F8DBF8341421F0
-:1052C0003148972AF8BB626C900EA5BF3E283B4739
-:1052D000F1E73F8E0BD2A36CC73E998DEA8F8F29E1
-:1052E0002DFBE40E25025D5A8E15A23F51F7E257C1
-:1052F00032EAAFCF5E17D8E08C08F8DC7C90EC6225
-:10530000C413D151A3531FDDC2DA57015D50BFEA68
-:10531000740A7FFF2F9AFEC7FE9C39C4CFAFBC86AC
-:10532000FB287FB6B870FE25AF3CE8C0799C92AAF6
-:10533000395F3FDB90E886714BCCBE44954AFEBC9A
-:10534000E4B91F12BF2D3EF2C3448A7F3077B28981
-:105350006C055F32CE6FD1A6D934BF62E625BE2B75
-:105360007956F4E0FEE059894DDF11412E5224AE0A
-:105370008F4F355B704D65A770E1C07D85B745FFE8
-:10538000568AFF2DA5F8CA0FF5FD20B68CEA67AD49
-:105390009C4E5F88FABE1AAC3CA1FCBA65753BD244
-:1053A000E7F410F7608C1B5731C9A7E143B808FD3B
-:1053B0008A47A60DE6F4614E294FFB0EF4FD147CDE
-:1053C0008EEDDBCD6E5BAEE13B76312338FE726D48
-:1053D0007C803B0AEDD5538960FF45985FA1A4AF5F
-:1053E00037605785F057887C7379DFF208976F5DD7
-:1053F000DEFD33A6E3FBBFBEC3E507BF437B05E08D
-:105400000A0CA6F7FB6609A40F2C2C1049AEB7981E
-:1054100035B936BED7F904E09670DDEDE317EC3F01
-:105420008EF04F766CF17AF82E445F56E1788EFE5E
-:10543000FDE972BB5893FF04C928FF6C1397FB81E9
-:10544000FD091F8F4B98FDBF7806E515E413F7AFF4
-:10545000CB5F367B70DE9F6F3FF0DEBD20A79FB72E
-:10546000E8726AD49FE1725AB273028B24A79F63D9
-:105470001A42243985E711E554E9203EFE47E94FF9
-:105480001D7F3785E14FD78703E1315C1FFE5974DB
-:1054900046D487F0E71D96D79FFF74BED3F9ADF4CD
-:1054A000971543293EA6F3A5CE777D7CA9F35DBF72
-:1054B00078A3017FE1EF2D188301B83CBBCD1447E1
-:1054C00028DFC3F77FE1BB43A9E3094F6E5AC658F3
-:1054D000D3A1D4F8D0BA3FACDE12D6DE1D56F78485
-:1054E000B5F786D5AB0DEDCBDB0EC83CAF256068BC
-:1054F00027AE78867D322812BFFAB95FDAFA85ECDA
-:1055000043BE507AE97BF34AE6B3633C7CAF48F193
-:10551000911EC0F12A18A7677B861FF3241A6C3CE2
-:10552000EED4A3F63AD05E6C88E5F5DE047915EA90
-:105530003DFD79AF8DC7F57A3CBD8ED810FBEDD817
-:105540001E91F476879F4D8FE467C28A4272D4C160
-:10555000067ACFE3FDD344257D05C65F9A441786BE
-:10556000748A6AEF71609E41CF9EAC3BE7C0F34501
-:105570006F8AB48DD883767B0C92C72D2587F877F8
-:105580009F32DF5393317EBF87FB79456BC3EC11AC
-:10559000B696F8A958592EA33E05BFECB871FF8204
-:1055A000CB45A9D65FC926E37BFD7BDCC145FBBDAE
-:1055B000748BF1BD578B0734EB7232868DD1FC7141
-:1055C0001E8FD2F4F23431E7CE39408F9EC322C30E
-:1055D000FDFB337B44A2C799ED7CBF9EE2F6D72347
-:1055E0007FF7923ED4F1D489F2240FACAF3A5FFD3D
-:1055F000AFBC87916F767D98FB33283B777D90FD1C
-:105600005BACFFE6FDF40F59FFF6535EB7D13E49A0
-:10561000CFEB76E2F79EBD7F4C7F18EBBB2D149F3E
-:10562000EE79FDAB5CE49F9E959612D4773D438066
-:10563000FE681FECFD2AB783D6D77AA2DB1F259917
-:10564000DB477BFEF6B1108F25CC0AED86D7A34948
-:105650009EAA5EB3513CAD67EF5779A176FF779D67
-:105660004FA5B67FD963677376227CB17CDFA7EA4A
-:10567000B7D73F5F8BF917ADFBE485F07ECAEFBE6D
-:10568000C9453DDAB393DB43DDE68EE7707FEE6814
-:10569000FDDC9566C073370A550AAC9B0DCF14A08C
-:1056A000DCF4C7CB371427BC527CF4FC5F830FC1FA
-:1056B000CDF59DDD6F1570DE5F7FFC21EA85D72D6E
-:1056C000C497FA7C3F6FA9257BE572F37698799CA5
-:1056D000E4FF9D790B812B99F728F33F37BD7F2D90
-:1056E00039892EE172D09FCFF73E44F597ED2E8297
-:1056F000F70AF9FDF67FF2F97F6BBAEF04BA3B2E99
-:105700003FEFF27FF2790F4CF737EFD7E8AE627ECA
-:105710004BD5EFBE21F8BEAD9E5BFB4F2EEF03CD08
-:105720005FB7EBD7985C4D99189F43AF01D669C519
-:105730003EB311C3856B46CC54D1CE14C3F62BF5C2
-:1057400072AF99FB4D22EE5B629C6F088FF331CDF7
-:105750008FA22D3D185A528AC98E959455DCBE965B
-:105760005CED6EC0CB9A6B17B82877888D3DEAC583
-:105770007ADA6417C5AFC3FCC97A81B905B06FA5E1
-:105780006B6F398CFE8D79842960C9A5F21896ABB0
-:10579000B5B8A459950D7E8F9263ACDB9CC6BA4513
-:1057A000EBCFCA38FCD624E6C7F8B43872BF8A7982
-:1057B0006DE218890950B7B1261FFA179624E3F74E
-:1057C0001B31C01E12CFBD5A3CF6F6E1716CBB1BFB
-:1057D000F138D244716B4A2E25BCB8FC6B789E8D93
-:1057E000D588D755ED884F09FD5F6E7F91DFCC34AA
-:1057F0007F59D2BA904698DC36633BCD4FBE2C9D84
-:10580000385DD2CB353A2D33D045A74304FA18E89A
-:10581000A2E3F9DBD2279C2EE1F8DF6F7612FE07B8
-:10582000A2974E9734C5CD505ECD9ABF3015FD4935
-:10583000ACA77918ED336BFE8214EF663EA493EAB1
-:1058400062482FF4DB02E0B7FD7EFBF31427EA7A0F
-:10585000E9D81D084FD96F456605FC756FB7B300D1
-:105860007E2FF965F4434B5B458AFB3329907757CC
-:10587000C8BEAF6EF797FDCA4EF329DD69F1DF06AA
-:10588000DF97EEFA2497ECB095BDE4D7F85E1238B6
-:10589000DD7D1DB9B8AF5B2A71FF239C5F62659EF9
-:1058A00027D0B93B7A0EC66D846D3CDFB6B4E51ED9
-:1058B000B3C5907F66D6DB915EF0BD2850BE13C2A3
-:1058C000179AE7A9FB1D9D2F0A1CBE36B31FF3765E
-:1058D0004BB7EDE8C6F853E9518B0BC3D255DBBE8D
-:1058E000A0FD8D29BF7AD9D141FEB668883FF4F377
-:1058F000FBB789C41F95AD15E487409DF8A2B2257A
-:1059000072FCEB72FE69D9AFF6EEF2010ACB7EFDB6
-:105910008203E35BA7DBB73AC8FFDF76E9B85B3FFA
-:105920003FBFE5914BFAF9A7F11FE0BFDC2087C527
-:1059300049B60D227F04E0CB8B94EFADF35BD9CB5E
-:10594000679FC33874E7CECF9F4378CBFFFBCBE78D
-:10595000D09F60AFDBD4AD889797DEA5389EFEDD83
-:105960002C99C79DBB5F7C81E29FDD1F80DF017F9B
-:10597000BAF79E4A477FB27BC7D789182F59BE779F
-:10598000DA609CEFF257A70C6611F4885E22DFFA0A
-:10599000AF20FE1A4EAF03AD07C8EFE9027AA3DFCE
-:1059A000D917B769A9E07130A716AFD91E39CEDD76
-:1059B0002F3ED37AD79D378DC7D2EC72B22B88D3C6
-:1059C000BC03741C7D05F4DBFE88E67F46A65F17EA
-:1059D000FE03E8B42C8C7E675B17FDFC197CD73A7C
-:1059E00068C0384DE00AF0A6C7D1BF27BB7F22A30D
-:1059F0007CEDFC25C5C5906EB7C144BB5F3E9B8E58
-:105A0000FB0F9F9A7BEFE7E7322C2AC61B4AF7BEB3
-:105A10004FF2D3FDEA118A53332D9EDDCDFAFEF00D
-:105A2000F8A3965359B5C5CEE33B1AFE31FEE37495
-:105A3000D0732DCEC3F9588FFF0C14F7699579DE1A
-:105A4000881EDFAFD8F2A1164F09D24B9884743A62
-:105A500076C9FD081D0F2AE26162681C33727CADB5
-:105A60002FDEADD10BE987F1CBBE3825D4D3306E14
-:105A7000E517DE6711F441F7661EFFEC3647CEA34B
-:105A8000D2E39ABF0A9753FF95C5332F07FFB7C5D7
-:105A90008F5F7652BFE178EABC10598FBF2DF37546
-:105AA000FFAAF7C5CA0543BE41B9C97B04F9B1A233
-:105AB000F598CCCFA5F0F352FA7C3BB5BCD1CE978C
-:105AC000448A77AD6A39407A3C5C5FE8FBA6E1F036
-:105AD0009ED0E0AD6CE3EB44E74EBB5F817E3AF7CE
-:105AE000EF267EAEDC7E8CE26D87B6FD5AEE08595D
-:105AF00057719DF087C0DFF9CABE5C1EB7E579EC2F
-:105B0000E1E39CD1F461D59EC8E3546DFFC2304EF1
-:105B100099AF45E6EBFDA5C73B2DB9EFC1FE4EB7EA
-:105B20009B19E6799E6E11A7473A17F5AEB66EEA55
-:105B3000E77E70BDA47CFD23FC5CCCF8B7A3281FD6
-:105B40007EF991E91FC6C463098487FE5A6B399FA9
-:105B5000B6FEC49D8AF46E3D72AF88EBD42EC46F3E
-:105B6000889D9FF74EF5143BE885BC8F3CE3915D23
-:105B7000C3F5CDC4A32603FC30CE605C07EAA11FA9
-:105B80003CA782F96E088FE8289C8EF088AA49B558
-:105B900009FDE761563C745E40EFD7AC1ACF03B005
-:105BA0000BE39CD84FD24C1E474CBE8B973EFD3C1E
-:105BB0004E7194BF0EE659A078D32CF07D927D7D76
-:105BC000C64186E7BF2651DE7696C5786EAC4B554A
-:105BD0007C26D0DFCFE46C5937D949F907D7584232
-:105BE000F30F582017F9516FD7EF7D587E421A7E78
-:105BF00002FD881A7C595A7EC210D621A07DBDC9EB
-:105C0000CECF270E55E24DF8FDF39ABDA99F3FEC8C
-:105C1000775E31EC9CE2E5CE27C64FC95F3AD405EA
-:105C2000FCB47ACF14CC5F8FBF277F47AA8A791242
-:105C30007F9E82E757E25FC81F930CF513AB1F9C52
-:105C40004AF5FFC81F930EF56F1AFF8DD7CB04CA14
-:105C5000572D583D7A2AF2EB55CBF92CC08851CEFE
-:105C6000EF40BC75793EBA7B9113F31F7A658E5F66
-:105C7000E6C176432671BCA5291FED403C0D357564
-:105C8000D4227FFE7CEF57B1A8179C4C25FCA8AC12
-:105C90005E45FAC1A349172F9147179E4FA6EB9374
-:105CA000CD8AF70184E391F923E85CE0332533AD35
-:105CB0003C5FCF98C7C0D478A26791464F84D31A6F
-:105CC000928FBF58F4C9FC5C4C93A6AFA6AA389E2D
-:105CD000E02B172F5EF7EDE17A50E74BED5C69C8DA
-:105CE00079C687105E9FE27DC892D0FF3CE31D1607
-:105CF000CF0A7C9F5C7C3E1DF95B3F9F187ECE9156
-:105D000049BDA648F65FB376CE7120783D56EF2A9E
-:105D10001C37F377CE9D8741BE4617C92E4CCD1C4C
-:105D2000BD627C82C4CF15529E439546BF24139713
-:105D300043F610A37DD61E8BE046BFB9E74195F42C
-:105D4000775AD16DE457F54467B4603E50CFC3FC39
-:105D50005C29664CA31C0DD9131340BF0FE4E05C13
-:105D6000981C9C33AE73C6717B2E3ADB3AA83F5524
-:105D7000EB0F0CB0C4E0B9E01E91EBE59E1A27C111
-:105D80003184F9F6E1FA7EA5E36DB518CFFD02DEA8
-:105D90005F40BCE878FFE5C0F47B45A3DF2B91E8CA
-:105DA000177EFE74BEC5FB6B6C7FAAF8D02A7415F3
-:105DB000C3CF9D86D3B54A6ADA88AE78E29E2F6853
-:105DC0009DD1E9367A852B411A64A0E3EBD8EFE840
-:105DD0003D5F98105E9D7E4F0F90EFFD070B5FCFEC
-:105DE000C2C74B9CD391E28DB4FE60102E2158CFD8
-:105DF000B5E6D1F8834D3CDED3BFBD10713ED07FF8
-:105E0000E6A5F2307355DE2FE0FFFD50BEFF10F126
-:105E10003F2222FE3F46BC03FE3FC6F65780FF4F9F
-:105E20002E857FDDAE2FD3F44219EE2B01FFFCC58A
-:105E300039333113C62D1415E2FF255B456D1FD292
-:105E40007D5B7262508F2CB9BE7A9F19F870C9B30E
-:105E500002F16991765EFD73ED5C4B785E5FF11C3B
-:105E60001FE9C9CBE7F7F9490F956D333EBF10E441
-:105E7000DB74CAC7F5F1F393A22617E1F83FA368D4
-:105E8000FAA228D6D02E9C0E43AA4D863CF0E429D7
-:105E90007DFD909F976472BE4FF1B53F9819C6077C
-:105EA000DC52FCF800E263BC3015FBCDD7E456EFC2
-:105EB0006FE80AE33A9FE1339EFBCB6A349EFB1BFB
-:105EC000DE9462687FCD864CC3FB91FE6B0DEFAF15
-:105ED000DB36D6501FD57283A1FDE8B602437D4C58
-:105EE000E01643FB7187671AEA13DAEF35B49F783F
-:105EF0007481E1FDF51DA586F7377EBACC50BFA9A8
-:105F0000F75F0DED038BB85EDC5F939486E70A7450
-:105F1000BCEC5F2A9B547CBE34DBA4E6863E4F7407
-:105F20003B73B1CC73A37F3590BC4CB126A785AE33
-:105F3000CFF9CC6CD06B53ACC67A8155E39774E043
-:105F40001720FECD56A35CA556CF6B02B39BA52CA4
-:105F50001946F9D2205FB758B97EBBC57A65FAED0C
-:105F60004E6C7FAA3240E7ECC3E54B44F9CAA2D29B
-:105F700047FBA9CC45F9961B6D463E4D1A40AFCC68
-:105F8000B31ACFC38BEA619B649013FDF9F9A8D0D3
-:105F9000E7C2E2DB286F67A07EE5A405B76E017D4E
-:105FA00029277BA9D49FAF9A638A9897F790F53BEE
-:105FB000FA491BFAD94F0F217EBB92DE7E0AF3CC41
-:105FC0002AE7F592BF946C31E22558770DE67954B3
-:105FD0004E7E8E50E5FFDC54D3782BAEF7FA3C179B
-:105FE0007D303311F303D206F09F5ED5E6F15C4DB0
-:105FF000C9AD45C3B03FD5147ABF457AA0AA10FDFC
-:1060000098A15A1EF453A6C8F94A3FD5FA198C0A2A
-:1060100014ED035521FBA0ABF8238704F3F8779325
-:10602000F7A7C8170B46B7E7F173CB6ED74CB2ABE7
-:1060300054825FD743E98AE729D42BE94912736672
-:10604000F48767F03C6F6306BCAF8F33B914AAF7CF
-:106050000A389EE5C78C0D82F1EAFF5B24F8EAF767
-:106060005F4FF93C16A59AE2A7FA3C99B6DFAFC795
-:106070008BCF26CD8A413CD65FDB776E8761FDAC46
-:10608000E26DC77ECFAE37D3B8F50582E1BD3E6F76
-:1060900069C31D741E2B5DE1F32E867923DC9634D3
-:1060A0000E57FD73024B23B8FEF7D243E8BFEC8ACC
-:1060B0007661BC0DF0B189E8EDCE3867D2270FF3D9
-:1060C000AA18A434AF21FB25B21FFA9695AFDB4C7A
-:1060D0009D9588F654F23546B8C5F566F20717C5A2
-:1060E0002A94AFE0AF59A1D1D538EF554933EF9C91
-:1060F0000BF0D4BD23324CFD7176342D3D04DF15F9
-:10610000B746BBFCCEFE78EF72723801EEB7106E68
-:10611000714321CD9BDA21DC3F17D83319C877DED4
-:10612000E944FF1413C37D9770F8FFD3CAE3C4EFAB
-:1061300058559A879C547CEB9641581691DC1DB5B6
-:106140000EB8CE7F68E5EBFC87D608EBFCE5EEFDEC
-:10615000289FD37E084BD16DD2ECDAEAEC507B1944
-:10616000F4D649EC57AF8B313FCEC57E07B6CB3C5A
-:106170004DD91997B7CBD01E43FED3EDB1BF5A8D81
-:106180007664889EFD4AD3B35F5DA19EBD80ED4ECF
-:10619000DD1B8868C724C891F5DC381BC77F952AAA
-:1061A00033CAE31B209E9F6D8B6C1F0EB40E5DCE19
-:1061B000CFC88CD6F954D7EFDCDF60C532ED2F9C09
-:1061C000D9E07F241BF729E38751DEED40FDA4AE23
-:1061D000F8830DF1ABE36D88CD884FC0A3D3C6F92A
-:1061E000C4698B640F96031E4D063C0EC7F603D997
-:1061F0008357ADDF4B8CE76EBA357C839E9771BCBD
-:10620000AEBB3ECEC3B845E5EC73A4E7AF7A9C398C
-:10621000C67544F7BF611C01E7DF7DD77F6B71B79F
-:106220000E8A17D5BD7A4D0CC6A72A0AFAF48695B0
-:10623000DB8599A407BB7659DC0867571CCFE7ECD0
-:10624000DA35F110C6393EAF399C2985D82D5DAFBE
-:106250001CC933437F5D3B8FE4499420E7277ED1FF
-:10626000DF575CFCCF3C8F123C27D0C76F56BE0E69
-:10627000ADB7F1F8C9D398C7369AB1F7A363F9FA65
-:1062800091687A1C9F47BFE3F3A17E7F5470E5C7F6
-:10629000002B26DD554C66ABE58DA600968F0A6E69
-:1062A00011E355BE91FC3C4D52161B9101FD284750
-:1062B000DB03088EA3A3D78DDB29EAA7EA3E2C0BCC
-:1062C00014EF02C47B5CAF2B097DFC37878DB3A133
-:1062D0005F214DE17AB7777E941FEF294A34B98F59
-:1062E00080AA67670E2F8CC5F77F8BE6F2F258D233
-:1062F00089265C8E7039A038D49B665ADF960D7162
-:10630000272F82EF974D88E77EE905987DC839965B
-:10631000C7E367091407B9007881E714FA023EB5AC
-:106320004BCC173316F4B089B955F00BEC9342EE11
-:10633000D9C1FF6876FC604DFFF6384D3E33E0452D
-:106340007619DBD509EE0C5C4F7781FC0D03FAB4AE
-:10635000D558A97CAD464D1806F2B8A72689EAAFF4
-:10636000D738A90CD48CA0E7FB6B5C548F36B5A74B
-:10637000D37A2C55AF9B87FEF5FD120BBDB723BC1E
-:10638000C47B568E87C8F9972EE69300AE2F353D15
-:1063900052FBD638E2AFA7C600D431FDBFFFD98A81
-:1063A0003F644D053D98FAA3C35953418E9F12781F
-:1063B000FE021E188E742E552F9F32B7C4A2A9F06C
-:1063C0006B1BF34D4DC2BCC8DE3F158E61CCF6E8A9
-:1063D0009FA64E1D09F3C7FDFE14C6F6DADEABC755
-:1063E00073D8A9FB3FAB8B81F9C86DFC3E9F8982B6
-:1063F000A756407D339BF30B933CB598CFD97337A9
-:1064000073E2FEBE3ECE5E1BB71376DBB89D3951FC
-:10641000E0FCC1E6CA5A1E416F6EE8BA11DE3EEFDB
-:10642000C0D7748F0F8CB72FD5305E2FC51107FAE8
-:106430002E75FFD7B48E5CE9773D1F49FC7C84C480
-:10644000F32BBAE6266EA6FD78681FBA8FDA2347CB
-:10645000B6D7DED2D68106EDBEB79F65F07283A6B1
-:106460005724C6F5FF6BD105BF47B961DE38DA5F47
-:10647000AAD3E209933A7AE5F9767E2F5C3ED413EB
-:106480004E78043C0FD7A5D13355601ECCFF486031
-:1064900033840228DD36CFDBD84FD2C24DBE97D130
-:1064A0005ED86571A2D9A3E3ABEE03D98AFA216164
-:1064B000CF31DA8FAA133A64A4F7978F7C4D71CB52
-:1064C0003A737532D56D171BB0FEB4BD7A23D699D9
-:1064D000EFEBA96F003F0CD6CEE1E313D463BB9082
-:1064E000E829583B57EF067ED865E6F52F1F394B54
-:1064F000FCB1CB5C3D9F8DE1F57A98EFAE586FAA69
-:1065000009549052FB65FDE19BB0AEB7FF92DA777C
-:10651000DB546E3F2ADE0CA47F5F5D85BA3DA42E5E
-:10652000F13AB3F2529F5FC581AF297FB8720FE78E
-:1065300047C41BCE13EFCDC375E98C7AD451EBA4BD
-:10654000B87336D7D701039FE9E753B798BC2C2A15
-:1065500044CF5E085BFF42CED9B1A88490FEB43828
-:10656000763A03BB342B186FCD642E2A87310F95F2
-:10657000D9DB96EE47B42DBBAFD5897A2B3ED7FA3F
-:106580008097E868F41F9ED0F4E2FAE8FC1BA301B0
-:106590009EF582778D887AF165B34AE72F3A24B267
-:1065A000373BB5358CAD3053BD5C3BF76D5EE95D77
-:1065B0003312F5EE2293AB19D7B30C4FBE19BE2F91
-:1065C000DB9DE1AA65C1BCE7B2D896C4B14A30EF01
-:1065D00059AF3FAAF1D946B5C986F7D2E8FB439532
-:1065E0006DEBD2717FFBB37D1F903CBD1F95417C4D
-:1065F0005CD17A44F6DA69BF4CC6F3299FD9FAD642
-:106600003F5AF7BE6C19740BEAF52FEB4D74B8794D
-:10661000203DF406E83F3738C8876AAC54FEC25DB7
-:106620007D2D9ADE055129D36C60B4BF90E9569157
-:106630008FE6ADB9A6C10A7CF482AC8E443E9B17AE
-:10664000954B7C5B162B72BE64B907DD92B6CF0DFD
-:10665000F5D43565D3BE533CBEC8686F546D5288BF
-:106660000FC00EC8473EA8DC60F2E17EA2C9DA4E38
-:10667000E77DE74531CD8F369E4F5CAFE93BDF6C60
-:106680001EDFBDDC39C592F351741E51AFBF1FE54B
-:1066900024BE28917CB4FF5572DE41E718BFFB3859
-:1066A00056C379C8FEE32804873E4E79701CD25742
-:1066B000E51FEC273FF88D6B757BD64D71ACE53B44
-:1066C000B4FC059B7B30F6F3B4A62718FAB18077AB
-:1066D00029A3AFEE9340CF1CECD333F90D53D390E5
-:1066E000BEC1F76C92410FB925A0D3C128ADEEFB16
-:1066F0007EE4F65161ED33F5FACC86A993FBC3F342
-:10670000B42D58B7427BE91B4B5F1DE1A373F5A184
-:10671000FDC5E9E3DF4BFDE9FC971AB5F0A00FF8E2
-:10672000EF60AC271FF37C7A673327CAE166498D97
-:106730007285D021358AAF3725E7AF35E03F88F73E
-:106740005C03FD4FD5380DFB8A8B8B96D17998541D
-:106750009D5ECCC7CF776DCA32EC27FE7F38AE1670
-:106760000EF700704CFD07C331C2305E108E1C0363
-:106770007C570B87183B6B7A06DA6B8F98280F28AB
-:10678000D1E4B366A25DF66F268AA70C673C0F883A
-:1067900029E30DFBB4997B2CF331FE9E29B1C3D2C2
-:1067A000589427B7B316D7A99F48645FC173AB3914
-:1067B0000E876E72E3FD4F2095D45F66B9B7821FD6
-:1067C000F2E6FB82FA3ED37095E5E3BDA09BA3E71A
-:1067D000DF188DFB66731EAAC23C98E795F12F3532
-:1067E0003083BC921DD2202C253BE3ABA8871B70C5
-:1067F000BF767014B75B04F670C3E1E448EFB9BC30
-:106800009E5BF3F0348C1B34AF745E8BFE53B3CDC0
-:10681000DFB21FF3761E53E8DED6AC47FD8D9950EC
-:1068200017D79968BD1463FDDB9A71DFFDC96C173A
-:10683000DA11CD68BF60FB4714F26B56D538D3F040
-:106840007E923A6D1DD8B276B28A79C1F58A1487E4
-:10685000EBDD2A73F55C3C7731EED18D0DD6EB5133
-:106860008FB91A07A9BC9E948CEB9A33D33A467B16
-:106870000FC868AE75A6A8B1C1FAF06FC0FA203D86
-:10688000B3B1C19D86FD2E2BD5FA3B88718A17E2E4
-:1068900034BC68EF33FBF4D2C606CCCB126B83F565
-:1068A000A930DFADCF723D3518FA47FB0BE6E3C3E5
-:1068B0007B057B874B744ECA06633B607EB691991D
-:1068C000B4DFD70C7A11EF2BEE1DC9DFEBFB34F2EE
-:1068D0007013EDD3607B5C6F6CC9BCBD3C83DF572C
-:1068E00020DB158A37C07A3015F39E14A6FF71F3AA
-:1068F000B8A4B68F1185F70184F0A375ED323AF78D
-:10690000691D66DC9F97D38C75897916A0BF27AA6D
-:10691000C6E737466BF94183580ADA6DC34D3E131B
-:10692000B61BC9FC545EC702648F8D621D541F8D57
-:106930005E63161E5B72D241AB71CC2DF238AA4752
-:10694000443B3171AE1E47F24E41BE74476B7661D7
-:106950000AEF3F7EC62CCAF7F569EFCD33863D318D
-:106960000DE6B57EC6DDCE50FB4E5F2F75FBAD4804
-:1069700083F9CB6821A2BDA0DB7545365E4F98E553
-:106980007E7A14C611DBCD26BC9FAD588B63166F83
-:10699000C84F44BBAC68DF5CB287D74473BB6CD1D3
-:1069A000FA19B277149EF79A4F767FFEBA0931181A
-:1069B000A76FB0B962AE47FEFD23BFDFF54AEDB168
-:1069C000E6C46B0A501E9BC1AFC6FB8F0E9ADDCA90
-:1069D00018E48B75C3C8CE6C8EF2D6C742BFCDFF0C
-:1069E000EA74D541FD6736F7F823384E43147F8F9C
-:1069F000F726216FF6EDF73F2F5C8C1E78FCF0FD3B
-:106A0000FE83B191EFF1BD43C35FD0FEF090DDD9BD
-:106A100060F6C4DC87F0BDCBE779D6EA89512F1147
-:106A200067FBB486E70376D6B85840E6F7D162BD77
-:106A3000A4683FDDAF5CD22250DC7C096B223D3A7A
-:106A40004C89D5EEA731E6C59616BD4DED4B5B7969
-:106A5000FB32D642ED757AE1BDB501831D3ACEF029
-:106A6000FD1DD1DC6FDDAC781F43FBFF9119D9C44C
-:106A70004FC06711F32DE207D877B9319AAF1F37AE
-:106A800062DBC8F628F163B87DB85CE0E7B307C203
-:106A900053D57993613D0ADE9F21D37AD4ADF9496C
-:106AA00087937CEB6F84F97F9FF54A24A7DABD2397
-:106AB00075825F42F9FABE33ECDE1B2D0F68BAA671
-:106AC00025FE43CBEFF93E6B79C30DFDDCCE02F41E
-:106AD000DD61ED9E1214A4487919D0AF411FDC3A54
-:106AE000C258BFDD65ACDF3929F23D7D6B6BD4B494
-:106AF000D07BAAD60E708EF32D8D5E577FDF120BE2
-:106B0000CFEB7B0BE95E81F994B47FC1F3FA141BE0
-:106B1000F3A01ED9BFCF46FB21558ABC1943165599
-:106B2000E0EFE2BDF08A9D9F3740FF17E3058A99A9
-:106B3000B70FDE97C4F751123C495A3CC3953463F2
-:106B4000D4B7871BFD2ACA0B96D846DC770DE627FB
-:106B50001AEFEDE88AFE380FFD6398CF6C8C4FE892
-:106B6000715A7D3EFF287F2C5ABBCF399C6E6B3407
-:106B7000F9A80BA3733DD23907DF73B9F952BB876C
-:106B8000FF29C143796889261E17ACB3B98E529C80
-:106B900044F30FEAB4B806F37D5DEF56C2EC9510EE
-:106BA000FF227DEDD7F5F539E477F338882D6A15A6
-:106BB000AEC30D36BD6EA6FAD3E6A600F9FDAF5AF8
-:106BC0009C181F83EFDD1867F3CD1D417E5D5D06C8
-:106BD0004BC17B0EDEB0CBB4FED6BD6A69C6F5D81C
-:106BE0006DF376DB42F249BAECEFD1F9A608FDF974
-:106BF0000CFD0DF976FDC1F8AD8877FDFD1BF6A7FC
-:106C00000222FFCE49F91B69ED1F7BA19EB8CB4242
-:106C1000714FFDF70FCACFE7D1FD8C7A7F13144E69
-:106C200087CE1AD5908F5D8E7A3707E5A09DF467E1
-:106C300045CB2083DED4F569C5F91B68BF2C4857C6
-:106C40002D2E21B5935EAA38FFBF68BC3B909E34C1
-:106C50004E12E9F781C74935E8E3E038930C70F745
-:106C60001F6732C1A18FC3DAA20CE79FEBCC3CAE09
-:106C7000726698332636821ED14B7183C970FF60CD
-:106C80009DE4B262FF75CA4E35347F287C5F00EF09
-:106C9000C56421F0D5C17A86C1720BF3525E403DC6
-:106CA000F6132207A2D9A562BF62C2F8E9F92EC67F
-:106CB000FE45B9BD107D7233F22DD88B3F583B7E17
-:106CC000950FEC49C9EC6947BA4A769313F3686BA0
-:106CD0001513C545EB92AC64FFAD12CA559473BD54
-:106CE0005FA9432238F47D8F81E6299F77D03CC38A
-:106CF000EF3BFB9F1B4FA176FDEE573B30D7930F29
-:106D0000FD5B54930B455D4E53D82721F40FEF479D
-:106D1000DA2045EC27BC9D8EFF01E96CEE70203D2A
-:106D2000BAE3A58879101B95EF9807312F4C1F27E0
-:106D30001CCD0EE0F74287232383F4E54605F5A535
-:106D4000FDCC9FDC4ED2CBB4EFADAF7FE684A9562D
-:106D50009E4F6CBC576F20FED3F1627DF341C6F3AA
-:106D600053BD947F72393C4882CB43FB007629E2C5
-:106D7000BE36584286FC384931E64F35481EE2633C
-:106D8000F34DD556DA27495B69C57D92D592330616
-:106D9000FDD8DE37C1FE83F9353A79BE6A78FF6BDC
-:106DA000F01E66B4731553C4FB79A306B0AFBA34B2
-:106DB000FAACD97769FE01F5E1C175372A4E5271F7
-:106DC000DD359B39BC03AD4B7ABF03E1EBD17DFCD4
-:106DD000F71B2C39563FAEFFE1E3354A1E4F3EBC50
-:106DE0006F047870DFAC31CD4DF86D542515FDD5AD
-:106DF000E81151CC1AEA6F65CCA2F767E2E3F1CC57
-:106E0000226B8C8F9C97A3E369B7F21DED1D6F1861
-:106E10005F0E7F8FE2E8217CD9A94CE8CF97BB9128
-:106E2000171338FCA1F7A65A338645BC7FB21F7FE3
-:106E300086F14DDE6446E7F70643B919FA6ED5EEE2
-:106E400043AAC0B50BFCF4F27B14A6C2FAE677E4C1
-:106E50005F4039C96BDFCFCFD1B426F07B1EB5EFD1
-:106E6000C3C75D62E7FEC812BB4A65CC51F72FF17C
-:106E7000F7375ADBA39C785EB1352EB21F9363D7E8
-:106E8000F3689AB473081DB44FA1B7CF9BC7DCCD8C
-:106E90000AC53D1BADE07F25F4B5FFA9B63F0282D0
-:106EA0000BE3DCF9DBEB9AF9F9513E7F8CAB62FB2B
-:106EB000C4C48E5C41FC0E74DBC60CF7DB55583B3A
-:106EC000B251CEE79ABC997618A7EA684722D65BFA
-:106ED000DF3E9D4E7E6F1DB7377B774753DCA03F6B
-:106EE0007D6AF979F2F329CC37A83FDDCAA500AD58
-:106EF000ABE5E7D3996F1CCDDB678D0BBEBFD3C26B
-:106F0000D8A4B1C8001C4F889F48F430DB4D067AE6
-:106F1000803C5E67D7E88178EAA3B776EF4BA77627
-:106F2000BFE071CD5F612AF7D7F5FBA58E67F7E566
-:106F30005BD07D5BE536F713784F0B3B2252BEE604
-:106F4000C229FCFEC48516770CDA570BFF53146A6E
-:106F5000697F93F3FD220D7F9DCC45F70EF8D6DABD
-:106F6000F8BE4E987F96F154FEB83FC2F78BDA44D4
-:106F7000CA1B5F3045F161BF79ED05BFC4FDF9E281
-:106F8000C6683A77BEF07BAE9368D72D7CC2E6C464
-:106F9000DF7B59FE41667E32F4BBFCC90CD507DFAE
-:106FA00045AFF024595DA0271FDB53887E45833011
-:106FB0007FBE3006FCCAC70EACC2B898F4CD94CFE1
-:106FC0006D507FF4B1775661BCE9B718E7263BF600
-:106FD000DD42B4635F42D0F4FD3FC0C14B874D5AE0
-:106FE000FDC4AAA9A0F2AF4D6835292AFA65275633
-:106FF000E139D9C438F718138CF78EFDB342EC6F22
-:10700000C113A3CE6D80F7E7ED17C8BE003A69DF64
-:107010000B374F01BBBB78B25E972D588F8F6686BA
-:1070200038BE3933383EDAD9AD7A7C8B45DD8C7188
-:10703000F7E305D55324E83FC3A1AECE19C9D8C4A0
-:10704000F5F9AA1BC6CF76C4DD8CF198D6BE7D8338
-:10705000F8D5181F6B65DE0366787FD3E3436EB601
-:107060000262E30779C6A830FF41D629ABA7DFF457
-:107070001DE46344BFF3590DF60492934388D2F4A0
-:1070800015FCDEC23EF94EE37CDB571FD1C1CFC3F6
-:10709000E8F5245E6F5D19595FDC12C3F9BA352A31
-:1070A000F2FB664D3F00BE03147F6D8BF60FCF08D9
-:1070B000EA0F901FEB2492A7755C7F801CCDB493E0
-:1070C000DC46ECEFDBCA6BAB76AF79ABE48EC6F88F
-:1070D00082AEC7308286E3CCB53B0DFA39AF7D0175
-:1070E000E9D751312A87C7C9F19330C5A84798B568
-:1070F0003D3B74DFFE77DA3C33AED3E33F013974B6
-:10710000DF69F98EFC4B9E9F2DC7387F88BD1D9C83
-:10711000C7548A67F4EB17FA736AFDBB72AE045F5B
-:10712000EA65F0154FF8BADC3C83FD19E32FFDFB4F
-:1071300093B57DC126E33A224786F3A4CE27807F0C
-:107140005388FE2CD6F4A99E07D1BD6B24E54F06CB
-:10715000C7E5E73181BEBFC4DF5DF2813E453D96A4
-:1071600027B96FC5F679ED712ADAEFC06FF51ABF4E
-:1071700049C86F3A9D5BE3AAF369BEEB04B24BFAD0
-:10718000D941DA3A9AD724D0EF990D9EE715E787CF
-:10719000C0A7EB7BE8BF55EB7F3CE7E767FBF8F95F
-:1071A0003E941FCD9F67AE0EBA5F3D1CFE852873CF
-:1071B0000921EBD5AB368AEBEB78BB5AFED7ED85D0
-:1071C000F201D725077D37F868C0E184768B511E20
-:1071D000505FB57C42F764B6B6890C7FB200E78D8C
-:1071E0007A234FD793BE95870A24B25B827AD94916
-:1071F000F68BAE3703566BB0FDB9B52B0BEB51AF29
-:107200006AF7ECC78BA0C5C706E1487370BB7792DD
-:107210009745FCDDB81CBB5DD723348F8D2B0AE866
-:107220005E852A6D3D9DD4E1A3785334E27142100E
-:107230001FFA7A7DA7A5E315EDBC97811FF53AD813
-:107240002595A6AC60FFF87E6608DFE739381F8415
-:10725000D3E7BBEA27C0830FF1F0430DEF0950C716
-:107260007B2D9804EB17E6FDCC505C6B3242E05668
-:10727000B83E4E104D5C8F5D462EE20731EDF7585B
-:10728000EC24CF417C70BBE5018716E7D5EE293FA2
-:10729000680239A17D363ECFEE5DC9D4EF6CADDD1D
-:1072A000DF4B2F6FD6F296747BB1E2B5D4CD46F8A2
-:1072B000797FBB1C1C2F7947DD63D08E19EE515CA2
-:1072C000E81FE4B5CFDC8FF924D97BF00704827C7A
-:1072D0009EDDC2E514B84BC3CB9BDB43FBAD74D83A
-:1072E0007539FBBBCC23FB28E757A4CB7D21725A11
-:1072F000E35038BE607E16C4A764D4A37AF9F7833E
-:10730000C3B31FCF2595033E506DEB786B6D99BFCE
-:10731000D286727C94B9508EBB5BE69B46215D3170
-:1073200011CC19A21FD6F379E87628F0650BF2E5A7
-:107330003AC7101A6FF85177740EBC1F8E7613C6B9
-:107340007D5BEC7EF423FC0EEF2E07E27356EF1408
-:10735000DC4FAD8CAEAEB5853CEF6BDF06ED898FB3
-:10736000BD22EE1F953FC0F8BDF1DA7CA0A9CF0287
-:10737000E355C820A759540F20DE5A65DEBEF73EFC
-:10738000FAA5115629F27BF960FDBE95F8F36D530D
-:107390001CD217FD24B493CB454F1AEE7BB2C11615
-:1073A00017AE03E07710BF1FB431C906FDFF1E4AB8
-:1073B000D4D3D3C4A5748E6B5A9640FB44BA7F8F46
-:1073C0007A0BFDA43BBF174DFCC82E3C380CE3D311
-:1073D00009D19C4ED08F55EBC76A1D1B94BFFF4847
-:1073E0001F49FE8EBEBE1D1404EAE7E04DD735D717
-:1073F00085F841D81FEAFF83C28CB4A5C8FF9A1F45
-:1074000047F6617C70DD457B65AC21CEE6D3E0EBD1
-:1074100048473E0AB547D13EEDB3677DF357DF0CD1
-:107420007A76E2F496005E715FCB8A6EFE17E86FA3
-:107430001AD8B336C0C33E8D2F0E66F844DC4F3DDC
-:10744000385CA0FBDC0F457973AA95E038895A5C5B
-:107450002051CB334F8CE2E50F62B81EFC3C86AF67
-:10746000D737A8BC9EE8881C4798ADBDFFA989EB1B
-:10747000F735F991F3D14F68FAF5AAEDDE1C21FC3E
-:10748000BEEE138E09DA7DDD946FC7E3FD0B34FE8B
-:10749000063B87E814B4ABF87E9D6E879E6D9F4DCA
-:1074A000F51382F7BD7B042C3D4F909FF4AE48F15D
-:1074B000A1E2586F22E6A55544458ECB0CD2F0F4DC
-:1074C000590DA338EF29DCCFCBE6BFB785F5251BD7
-:1074D0009EA47B1D4A999FE2BD451B1A68BFAEC89A
-:1074E0002F30A780FE9987C781353A946E110D71B0
-:1074F000E7C552B51C9B13E45BFC1DAED0F7259B82
-:10750000C619EA576F971618F23B827AA790ECBF1C
-:10751000F07E753E0FB74F8FD7380DF1EE051B8605
-:1075200017F2CD78DE7E2173D17C17366619EF1104
-:107530006E4CB8B27B82C11EF545845326FDA83F30
-:107540003F0EF8F785C4F7177C3A8CE0F88BC37BC5
-:107550005D8C018E68E633C4CF26F3DF29B4F1F8E1
-:1075600023F08FEF5276407ECC77F507AE1DC01F1B
-:10757000C8FD87FA037993B9FE654D02E5E04C9C9E
-:107580006AB4CF66C7F0756E764CB4C13E2B9A676D
-:107590006C37576B37576B77B9384AA85D2664A1AB
-:1075A0003EE3FDE9BF1F9571FA6DCAFFDC10C3ED24
-:1075B000D79FAA6E6F0CF4BB563B77D06FDEDAEF25
-:1075C0004AAD35F7E585525EE0E66F1EACC3DF09D4
-:1075D000E9DD01F63FE8C1FC67DFA07BBAF4EF6E9E
-:1075E0005FD132B408F054A9C973B98BCFAFDC15A1
-:1075F0009087413F29E51CAEB4967D8214F25D5A16
-:10760000096FB722C66CF02F7FA2D5FF35C649653A
-:107610005A49401806ED52366D1124EC0F7F570B76
-:10762000E049A966FED0DF934A19CFED9ADBC76F18
-:107630001616E604F1D0689A91A3625C3531DA85BA
-:10764000EBCC47AAB70EF150FE5180CE494CFCA8B6
-:107650005D42BBBD5B75D7237FEB78708A6A0AAE4B
-:10766000A3D11F71389BFAFC62BEBE30F6A86647F4
-:1076700037EB76E961C6ED425AA712578E30FC3ED1
-:1076800061629CB64E2432EF4E85DA3732A227A3D0
-:10769000F924AECC6EE6762CA7F7B42CCF167C3E40
-:1076A0006DF0C8B178DF47D6DA8084BF3BFEDA26BA
-:1076B00053C4FB519A35FCC33C9EC5F9E9F3B89C11
-:1076C0005ED0DB9907884FE8F2103D3DB2DFC1D8AC
-:1076D000E3F43EFFD9F87BE9FECA7A997E4F4EC7A4
-:1076E0007FB7EA6941BCA6B46C160837DA787ADC51
-:1076F0000E9FA35C1E978DE73A0794FB153B8716F8
-:1077000085CA7DBD4CF4D91C96E7AFDBF77F88E1D5
-:10771000EBEA9058CF3EC44B65DB3A8AEF2CD9C2D6
-:107720007FF76740FC5C21FE8412EE0794CFE1FBFB
-:107730005EF9CF4A44FFB27AFEFBACE5DB77F0B8E6
-:10774000CE8F990BF54379CB0EA128077F0773875E
-:10775000B028049FA9E57ECA83BFC6AECB1FD75B06
-:10776000E1FC8E7162B4530ED9B87EE8CC577CB878
-:107770001FDC69F69663BBCEE46817E677E9F8FF8D
-:10778000FD8E9BE9DCB57DA7258065A3A939C98A53
-:10779000FB0ED7CA2EE4AB6ED57B12E91327795ABC
-:1077A000F1FBD878BBAB16BE755AD85855B9723CA8
-:1077B0004C0CE38F893FE67293A43AF4BC86B12463
-:1077C00037AA9DEB2D13D76787CC7C1E3B1987F713
-:1077D0000731EEB3248787E368DC94F2009D1FCA6B
-:1077E00038BDD370CE30C85FEEBF7D1B7EFF3F2C0F
-:1077F000A14B2800800000001F8B08000000000043
-:1078000000FFD57D7B7C54C5F5F8DCBDFB0AD90DA6
-:107810009BF73BDC100C28246C9E0401D924848740
-:10782000206E0228C86B7947926C02D2FED0FA6DA6
-:10783000168331E56B6BD41645A92E8896B65A830C
-:10784000A2060DB82822D64723A58A2DDAA5202224
-:1078500084641BFBC056CB6FCE9999ECDE9B0D0F59
-:107860006BFBF97CE18FC9DC799F73E69C33E79C65
-:10787000991D33B5CDA88C22A4A69A38BC342DFD11
-:10788000E90EE98485900BF06F2221836C3221F19F
-:1078900084A43CBD4D522C58BE7F5A1CD6272605C9
-:1078A000BE4BD8AE8696AFA0A95B22848C25E4A0FF
-:1078B0008178CC3184B4E82A47D968FD9684487B26
-:1078C000132D3B667345DB687F96639D07ACB4EA76
-:1078D00098633EA38BF64BDAE9C76442DE3012129E
-:1078E00041DB1D8C60EDD36D74902242261B89070D
-:1078F000BF1B3D2314DADFC1A183B0BF97B7EAA64F
-:107900007A697BC320B2D81932EF749B0EDBA56C69
-:10791000DD21E9E8F7B8485A1E323F51EF015B59C3
-:1079200026CC67CCD44E8443DD563DAEA7C2E81CBE
-:10793000B66654B0DE68E88FD67BEDE64F8C7EFAF3
-:10794000FDC72FBD6F2450BF5572B4C1FC5BDF373C
-:10795000CEC9A1A9E7E7324920643A61FF36BFF0FA
-:10796000BE51A1DFA7EFA670A2F5EA76EFD22FA352
-:107970006957A9C5238D2624F3CC6B8B4821FDDEE6
-:10798000662211746EDD3657918DCEFBCD5D530EA0
-:10799000495184589F33F92015F021C49FE1B40662
-:1079A000E725523A30CE2F722AFDB310B246EF557A
-:1079B00099F0DD955945EBB7C630F8CC1FCCE042C5
-:1079C0002CEC7B155F97800B1D7F0A8C5F91E5DCAB
-:1079D00001FD542446D89B32619EF9AF9929DCEB16
-:1079E000EC923D82568D2B67F00C9D57654EB87911
-:1079F0006DC0F1E263D9F844EFCF807109F1B2EFC5
-:107A0000326921F9C1F67338BEE9771FFB4E863A19
-:107A10007382F3D7E26F834DC2FA61E86C11ACA3B5
-:107A2000F698CFC7E8AC530F749679E630E243D0AE
-:107A3000CDCFB6EA3115FDD5D98CD85F9D4D8F706D
-:107A4000D90C781A4C53032C9AA61BCC5E0F85C711
-:107A50009BF3261F9272297E6E31FA207D43B7B4C4
-:107A600016CADF4861E3B7E8746B21DF729785348B
-:107A7000215E1D6E98CF6B3747217E6AE71ABD26BF
-:107A8000DACF8F9F9758DE63F112FA67AD6BF6720B
-:107A90006847E222EC4F02FE5C078C73ACFDE94ABA
-:107AA000796EBF51A1DFA7B7B1FD27F050DBC6E863
-:107AB0004BEC0701D7203CBDAAFD24F0317FB08DEF
-:107AC000D105A5178077CDCE08DB49331BEB02012A
-:107AD000FA8C56E5EBDB936D274704F335F007D0BE
-:107AE000C10E628179D6F279CED3B9EE83FD5567A6
-:107AF000F61F3450D4161F0DE07E1F887E6BD6FF14
-:107B00003AFB640121AB930E612AF6AD61A87A7F3E
-:107B10006FE5786F8294B67B82D34D4D611BEECBBF
-:107B20009A930DB89F2D53195FB31C238E503C13AD
-:107B3000F243BEDE7BB17D4564DB6499C2BDE27178
-:107B4000C9D644FACF4FA4AB24E26CA3FD7DB6F5B1
-:107B5000F5A82500DFAF2EC8A498AE3782AD7737E1
-:107B6000E73B5D3B29C091DE1B8C24CC7A2FB73FCD
-:107B7000E23B22013C6B38ECBB9E2E1FFB29A51774
-:107B8000CFCEC1F6ABE892CF3E3DEBF64FE9BCBBA2
-:107B9000764CB4CB40364D4EA49F407C847D3BA5B3
-:107BA0009F38994C9528DE37B4BD1E358EB6FBFC48
-:107BB00097A3F3816FBFCDF7FD99E7E5F50097BB7C
-:107BC0007EF6EC75505EE395624D30CECEC7FF95E4
-:107BD00042FBA9DE510F10264DBF7CD5E8A7F574F6
-:107BE000DE6DECFBCEC136A8F7F913F75F07F06E38
-:107BF0006A6BC2F2334F6CC3FC6B3F7B76DF3F682E
-:107C0000BD5A67941DEA9D797E3FE2A5D6A577C04F
-:107C10007A07A2EBCDBBF6337ED926E17E2373191A
-:107C20001F13742DE8F7F39F2D1E1B2A37C4F71678
-:107C300023973B83981C39CBF76F4D99A505D2B399
-:107C4000CF44CC85F5BA8DFEEC6898CF2846171F37
-:107C50007178D4B6AD31B82DD81EFBF980EE7B48D3
-:107C600073287D9EA2F44E6BEDB85000E3FD0AEB45
-:107C7000D37A251114BE372F382EC17C22473518F0
-:107C80006A709EBF64E574D5A1E5C5EB183D6AE94D
-:107C9000E00B9B05EB8B7D90B2BB324D413E60B259
-:107CA000333ECED69752ED6AB2D2EFD7AF73D965D5
-:107CB0008AC7974F1F9E9C4AF33F1B211520FE65E4
-:107CC00089C9398F05C7A95B5F464ED0F9EAA2D9A9
-:107CD0007E49B011FDB5C807B631BAD713BD05F25C
-:107CE000FA00F289BA162E0777B0791273206396DC
-:107CF00015DB59AE8D09CE83B6B358301FC8B829ED
-:107D000007E48E672ECA1DC588F33D23F801F1E410
-:107D10002ECC09EEB7041D7101FE138C34B5307EF4
-:107D20005349FB4F8F2E4D8A2E0AA6098358B91648
-:107D30004EB7F0F21F453B92A2015E3B6355F260E5
-:107D400020BEF2DACDDD4C6EBF721CE9D00D740896
-:107D5000E3BB4EAAE4F67264AE940EF71C473A5C9D
-:107D6000DECEF8ABBBBDD4B88CA69B253217E6EFB0
-:107D7000E6F4047464A7F99BA2A3717DEEEBFCD931
-:107D8000C0A7BA39DD75EF61F4F6864EE701F8BC9D
-:107D9000B17DE43690075AF928553B11DF6E8A6FA2
-:107DA00093047AD6BAC3A067D555133BEC57F76E48
-:107DB000BE1F1A08EE07777BE572E82F356E9A5DD5
-:107DC00096502F999C4AF3EE5A5204FB2D656BD9BD
-:107DD0001EA00BD22E91AB205FEDDC0DEDAF8FAB73
-:107DE000B3CB9920F7B6279969FDEB471463FBCD18
-:107DF000E94A29F4E7A920B627216F70A13CDB9C52
-:107E00003CD20EF2CEEDDA887A175106D9A19CB891
-:107E1000F46BA1BEDBB3806C92C2ECE33D9203CB6A
-:107E2000BD91DE08DA7E7A3BD37FDCED6C1F9F13B9
-:107E3000F011A9A173118CD7FD828978A4209DBD72
-:107E4000B9670A93B32F9A50CE9E6D749013543431
-:107E50008F8C5610AF028E35AD993AA05B42669971
-:107E6000601ECBF83C5A0D4C6E44733990752F9BB5
-:107E7000C772BE1F9647EB786AE4FBAF95C9059BB6
-:107E80002717E4E0393E1E924502977374E8BAE57D
-:107E90003EDC27B54FB3FEE24C8EBCDB42E855E832
-:107EA000475A7A6CE2E3A66C3D20013349D95AA5C2
-:107EB000DAE7D757135F3D5DE7F55B75BE89B9A873
-:107EC00037DD82FC7C83916C97FAF7774F34E35B64
-:107ED00015B1CE3C09E4D7CD16D43FFAF6E9208798
-:107EE0002E02F4B87CC9DE84AB7016EA68BDD309F3
-:107EF000563BE0ED471C8E5A7DABAFBD460F9CD183
-:107F0000EAC9254369E9864173019E545FB798A188
-:107F10009D8DB6A7F512B68F7B6213F2AB26ECF7F8
-:107F2000F6681BEB27D659D8002C2ECBB98EC92763
-:107F3000AB3DDC7AD2A3859EBD284F07F433DB82AC
-:107F4000FBE1C7AF484B19BD514128013DB2FD418E
-:107F5000E8FE7852417A443DCADDE0F486A747B690
-:107F60005FDC54AF023D9BD2E35AA6275B08DB4F90
-:107F70008C2E23A73279007C2B549F15FB54BBEF2A
-:107F800005FDF6EDFBCBDCEFDD06B61FBB291C8043
-:107F9000DEFBE8FC6546E79B36D0FD48CB37D1FDDC
-:107FA000D814C2FFB5E71F98279C0704BF3D66732E
-:107FB00076005F746F7FAB19C996F347F7CB3FC864
-:107FC000BE98DE6586CAB45F33DDAFA1F463A6E078
-:107FD000B6E663EA013911B95EAD4789F4836826D4
-:107FE000BFBEB1DE3842D2A3DEC3F155AB737D0014
-:107FF0007C1EF4464A1124633DD31B1340E600DE89
-:10800000B6477A413F4E4820AEE7C2CC673FDF67B4
-:10801000029FE2FC9010C5EAF7F27DFF29AFF74F0F
-:108020009E869C4B703F283AD771220F2C8F443B81
-:108030003A2F2C17F3E93BD798D97C13EECADEBE52
-:1080400029048FC17D75753EE037EB5E9F7EA925C3
-:10805000388E908B5ABA81F983FC81F5548E1AB808
-:108060005EEB7E7E3ED3D07104DF5F7BA8B882B426
-:10807000D5E0FB2BEEC7355602FA222507472C9D8B
-:1080800057FDBEE16C1F8D086443FBEA58D74D31A4
-:10809000B4DF3193F8FEA0DFABE09CA0271E530CA9
-:1080A000E0DDE0F587E0F9D318D67F8FD5EC91E9D4
-:1080B000FEB823D6150DED3D65C4EE03397307E513
-:1080C00027B06F89AF08F84D3DF147019CC7585D57
-:1080D000F13140BF726736C9A2FC57F2E7C2F763BD
-:1080E0001151B984F6F371FB6F9F7985B65AF8CABE
-:1080F000B985DF03FA7A312203E8E218D5973B51BC
-:10810000DF560683BEDD4B94C1B630FC57A40BCCC2
-:108110003AB3BE20983F66559F2F447A4D0CC36FEB
-:10812000FDF914E28985FE099EBF7B6214F65D1F8E
-:108130003082EA567F3E8378687F1FEB48755B98F4
-:108140007137C5307ADB4DC8D470E5F7F171760F21
-:1081500065FB30B04DF2027FAC5EBFE1CF32E50788
-:10816000D5EBAC3E4C6931E86FD5368F4F47F3C73E
-:108170000C8C1FD17FB3CDC541B947EBE9C7030EC6
-:108180003CF4204BF9E0522EB79635BCF925D813B4
-:10819000AAF5C43C9EF6B3DCEC3C984A8B3EB32C6B
-:1081A0008F02B6BFF23BB725805C4A5CD0CAEC3286
-:1081B00064920DF45EC93143BE1079313D4B8FFAA4
-:1081C00031E29FE2EB8B18E74CC0F782C104F580E7
-:1081D00005B7457A3D217CD0CCE1A1A59B4FB87E67
-:1081E000A5ED7F766C1981FE3AA29C73813E16DC68
-:1081F000764EC5CFBA25FF538F025DADB1DA9F64CD
-:10820000DD653843E8FE3B62BCF33AC4534F5E671A
-:10821000F6FA4CA0DF40C68760CFEA30D93C0A941A
-:108220001B11CFA2DD9F1A29E3CB0EE6979E1E36C7
-:1082300019E86B19B13703DE97B544124F083F03B5
-:108240000518E8C37D9E603F4B3BDE3C0AFCDCAD7D
-:10825000F7239D2C355B108FEEF37A9C0769317400
-:10826000F9457B8AFB23518EDB607D9E7BC6479F51
-:108270001A493F26D2EFB87ED7EDF0FDA1C828E21B
-:1082800000FA784BF60EA7F3EF352B836328BCEA90
-:108290008D940E4663374E7388FE43D2AC6AFC77EA
-:1082A000BCF525CC67B9D9650439BEC241CFA73228
-:1082B000E0C957641B158AEFF1F28591978FEF455E
-:1082C0007CBF7F6CA4F41F661FDDC7E1DF23EAA536
-:1082D000B07DF27106A97E0ED26B684ADB7D3C94BC
-:1082E000E7F3793E9BD74B60F91D7C9F7C9CCBEAE2
-:1082F00069C7F1C530FE363BD6B115E045DBF98CD8
-:108300004017FB22BCA8B716527E07FC6D6D3AEAF7
-:10831000AD94AFEDC07AD9C4178DF54C28574803FA
-:10832000E57BB0CF8B1484CFA6524A27B43CB0D79C
-:1083300064DBAE04F12AF0A9C5637B8CF4EFC9C3FA
-:1083400051923ED48E42E5617B0CB3A318617FD27B
-:108350009918999E360CF18574225F3EBE6E8C6032
-:1083600078A0FBF4B518D47B7D39A1FBE504C79751
-:10837000E0671F0F52E3B58AE3E16D5E6F518C8DAC
-:10838000C94F7B00F7DDC731AC7E5C169343420FCB
-:10839000FF0387CB4D9A54C8953153D5FAC54D1C70
-:1083A0009F37C54409BC7E08F315F288F2175F3485
-:1083B000DD0F0B5E35217F211B03D9B0FF68BD6344
-:1083C000586E0A2C8AA572E426AADF18F3B1DD22C2
-:1083D00068DFEF3C3F4AD08595809C3E25D65318F8
-:1083E000407E4FE51DAE6B29A17C43BA34FE37D0E9
-:1083F0003AC994D6870C56D8F94EA60302ED8F20C1
-:108400000AF447E1FEE750B86BC73BC6E9E09F318D
-:10841000921EF19647F2709FBDFF857521EDF29C8B
-:10842000CDECD151BEFFB8CE7501FAE9BAFD2DD41D
-:10843000CB8F197DD9AD9630E546DF630F49C1F288
-:10844000C53F973D46CA2F767776FDE466BAEEA51E
-:108450009DB21D865C7AE75FDF1D037A75A7C10EAA
-:10846000E7462ADFEFD5C3BC1B981E794CA7A6832D
-:10847000B3DF559F73D26219BEA8DE83FA9CE03B3E
-:10848000427EDF4A7C57815C5F461C4648FFB466EB
-:10849000D50C42E1B7C2B20EF9D1E76BA7A11EBC61
-:1084A0009278B07C598BE14FA1F26145AB3ABFEABB
-:1084B0006175FE56AF3ADF677F2E0F2FDFA7C732F9
-:1084C0003A3E4BD93EE03FB0C1E4053D485BAF9832
-:1084D000D7CBA43CB113F82495FB60475817E1486B
-:1084E00004BEBE6E6F69E2C5EC7CF5E7AF21DE101D
-:1084F0007D23A837E4126F6CFF7ECB63158423F4D1
-:10850000ABF071E0BC71B62CFC3A26C60A3D651092
-:10851000F627BE8B7E82E345E13CEACF9B07988F2E
-:1085200005DB9F5D197E9C1BFAC6B1A9E464B07D92
-:108530001C936BFC1C2DE8A3FE7C127E1779A1070F
-:1085400007DBA531FD8AA4D94E4506F994B0638BAB
-:10855000FD704222E664B43BDDCFCFEBF65CB05F4A
-:108560009F003D08F6E314659F9F4E71D9F7C666DC
-:10857000EB8706F78B761D94AECEF843F8EEB25833
-:108580006B1C8E6B27761857D0FBA2DB2B06BBE843
-:108590007CFF786779A26B54283FF530BF8951E89A
-:1085A0005F16959C251A39BCACFD2DD4BBA8BE9591
-:1085B0000D4CE7D3BDB723BDAF24CE04A0F39EBDC1
-:1085C000C3335CFF86FC15F399E559622098A79B9D
-:1085D00098EEBF2A3E9F591D4CEFD3991D061CC72C
-:1085E00041145B021EA5D97C29F3D4D3FC84BEF9C7
-:1085F00083918E90F17CFE12B4A7F09DC053B2D44B
-:108600009504F336C1B874BC08E24D82B469AC5D20
-:108610008174A2E4D4B379303C4F260D69505F6772
-:10862000F6CB6C9D740609D0BE0F5E98B7F2FCC6FF
-:10863000D9BD8B56C0778B15F98891CF63472CE550
-:108640008766E42F6658B7C9E2FB1CFD643CF594CD
-:1086500029B88F3D4309DA3B06913602E35A2CE7ED
-:108660003CB0581BB149908FB0F5FAE0FC70CE6673
-:10867000F1E846239FDC190B7C527A6725E085F2EE
-:108680006566FF19A85CEFC373B7E073317C7E4D5C
-:108690009CCF2513068758E2C0F11EB0AE9C414026
-:1086A0008459D649D07E4BD454F4EF2500E0697943
-:1086B000EC54BD8A6FC53BD5F9C4B9EA7CB24B9D79
-:1086C00037D3933FE88B92CF99742116CF5923C0AB
-:1086D000DE62E0FCA299CFEB08A4743DEF713EFD91
-:1086E0008DF513BBFABCEE8E3112B4E32598CDD0D4
-:1086F0003FD557DE8B65FACA271E289703C8CFF3EC
-:1087000026B6F9C0AED37C8364BF8B7E6FB62A1BBE
-:10871000F494543DD32466C7D1DB4AF5B47C5B8620
-:10872000CDBE89E6EBC17E1D0BF3B7D53C8DF64976
-:1087300013AB4702CDE08FDCB6C966837A71E58161
-:10874000C946D08B5710DB761286BEBFA2FB86CE01
-:10875000F709C853BC489C5E220F29F3710DBC7CFD
-:1087600007FC9DC5F2138BE15CCAFE6575E4753AA2
-:10877000C0EEE090512ED677E4BD6EA1E365CDCE7C
-:10878000433BBCB39CF97309DFF76334FB6A5C902D
-:10879000CEB13C8FE7877570BB6E9C89F96B6D74A9
-:1087A00088626636C0FA718CFEED44FC63FBF25AB7
-:1087B00012FC07FD9507FB473E3429581CDC677403
-:1087C000A87CB3BDA996D61BA3F7ED877D3C8EA7E9
-:1087D000793C7DA3F40694BF9D3A8B62D4B17D6D44
-:1087E000CE0213865306B814DB7ED004FD4C907C79
-:1087F00098664CBDBF09A65FC5ED47D14946EF0657
-:10880000BA8EA6128A67B477FCF920D8A5E5074985
-:1088100001E0E98841C839079ED3157A1CFB1A3A52
-:10882000986C40FDFC2F932AF03B01D58CCEBBD237
-:10883000C61621BE0F2C5F75283F6AE364E437B388
-:10884000A632BF6AFD5CB3579240CE10E677D2BB2A
-:10885000326F0AB197083FC4FB0632775798F3444A
-:108860006D1CD34FAB66303B6FFD46A3CA7F531DD3
-:10887000C7EC5E33E3268F8C4379C4FCA779715C27
-:108880006F1B4146009F0AE1234550AFABF4ED81D9
-:10889000F88CBA9CF399398E0203EAFD9CDF08BE7E
-:1088A000EE1CC4F6F33C42D281AE679306E4FF8728
-:1088B0004B6F457E7313F118006F1F95B17802312D
-:1088C000EF5953D57AD21CA73A7FF35CAD1EC5F0A1
-:1088D00021C69DE7529757093D78AA5A0F5EF0FFCF
-:1088E000BE8A46B99AF854DD8521E0E760F600C0FB
-:1088F0000BF373E8916EDC1B993FBCBE3DEF8D38E6
-:10890000D8677712BECF7649CBD1FFB24B5A1182CE
-:10891000FFD45AAF047264B855D87D98DEE4347938
-:10892000F783DFC359831291BCCEE3490E403C4923
-:108930007E90BEAD65561657411CB5309F345BA482
-:108940001DF4FE165D3EDA655BA2AC2A3BFAA60D6D
-:108950004A05D413F658C544F26D9C6EC29D77D774
-:10896000C531FEBA59627671CF3C339E2BE3B39C7E
-:108970002A3F41BC4C8E829D70649C22EAA3FD6319
-:10898000B3C1955C4053AF44971117D25E261BD1FB
-:10899000AEA8E14FF1B176B4EBC70FCE413BFD9CE1
-:1089A0008E3CB42F124B84FD2A29D8FF9CD9DBF4CE
-:1089B00010A753DFB14DBFDC12A4BB7BE2B85C8DC6
-:1089C000249140AF7D76BAE74C68A77B5CE7FC5FFB
-:1089D000A0CB5AA30FED7121F48ADF07928BAB383D
-:1089E000BD18CA9CF356D0F9F5BC6BB4C3F9191D78
-:1089F0006DB4FFE7F744A39D515F45503E6D2C6574
-:108A00007CA407EC5F741D9F4557E3F960A3D48AEB
-:108A1000F2A33B6632D2F16ACB013C07576FA574D3
-:108A200018229F56EF50E76B48279EDF6B9FEE475B
-:108A3000CFC817051F76EF56B723C3D47C378FCB2B
-:108A40008B7CA77D56054C7DAE3D8B9DC3E9418651
-:108A5000AEA3E81D23B7EF2EB09D8A0056FB947499
-:108A600031FDADC77A5A66FB9FC983223E8E566E92
-:108A70001571BDED3ACABFE0FC2AF4B022C2F2077C
-:108A8000741D72922E38DF42DE4EE87F424E087C23
-:108A90009596105242F743A7E04F43C950C037EDB7
-:108AA0001FF78904914331D8BF07CE7DE3F878944E
-:108AB0001E3C20B73D3AB317E8AB596A4039690606
-:108AC0003D9FA69B2417CA8397AA3D32C07B2C6981
-:108AD000983583D61B6FEE8C0438513A39124A3FD1
-:108AE0004DC497B14B52D111967745BF1D968E84D8
-:108AF0003CF37DC4F498E974C5D04F05387E687A9C
-:108B00004062E7C829961FEBA1FDDBBA69482753ED
-:108B100089570FF3ABB0A9F13F25499D9FA6F4A358
-:108B20000F8CC37070784E1FA12E77087E47D4FC3F
-:108B30002E937C857A18F9C1C1EF805D21723D19B1
-:108B400001FA0DD544711F6AE9E0EBB86FDD6FF2F1
-:108B5000755C18BF490FB7135F4BFC2B9F96FAD378
-:108B600059F71BEBE5A4107A14FBE265038B7F90A9
-:108B70005E65FEA9123319E503FA2A647645B13F12
-:108B8000AE05FA8C09D25D31FF9E11CFE96C081950
-:108B9000027436A13DC22753BCE4F1FEAE05BACB48
-:108BA0000FEA23E25CD154D28FBE32A52CD45F7081
-:108BB000DF097DA4406A6BD267021FB9A709E61BD3
-:108BC000424F43E38B802F517AC27DDA4FCEAACB3E
-:108BD00035F426F02EF4E552D28074365BA760EAB5
-:108BE000AB5C85F2B5DC325B0FEDDFAC62F43609CD
-:108BF000E8310BEAABE9A5DCACCE6BE9918EA80BB2
-:108C00001D574B9F03D1DB10A037215F632F4D6FA2
-:108C1000D3E3BF757A9B1E7F117AD3D299E05FBBF5
-:108C2000226CE5A03FD7574B280F0ADE1DD604F96A
-:108C3000E17599A84FEF8AB6A37E5DDFC0CA0B3BF2
-:108C40001D32C4BD64ADE3E599CE72C8D7AFA7E5C8
-:108C5000B4EBA2232C2E66D89DAC3CEFAE86D7ADEC
-:108C6000A0677858FB973F6F96A368B9B799B72F5D
-:108C70006D2D877C7D0B6BFF19F8A946437C9AB755
-:108C800009BE5F7D6FA69D1DAB99FE3E91AF7797A4
-:108C9000F4DCEBD8AE95B55B75D03C88E0F99FE984
-:108CA000E5D7F1754EDCCAD61977E2FAA90AA58B89
-:108CB00015010FEA6FA774B5C5C8DF06383F974A9C
-:108CC000AD69904EA1EC175287D9DE220F657ECC9C
-:108CD000ED74887BE299FD45F8FF20CEA032449FD9
-:108CE000B8279ED96345BD84188A01A08747ACA8E0
-:108CF0005F0BFFA4EF212281BC8735723D24ACBFFE
-:108D0000724A5603EA115386083FA55FBF948E9BB3
-:108D100077E18BC9E1EC433FE2E39EE671137D7A94
-:108D2000B237530774B10B88240580F4DEAF417F5E
-:108D3000DB057E4826A43CA404F0CAF25BE37FBDB9
-:108D4000A9653C85AFAE41EF01A1962161DCC9CC9C
-:108D50004EE21B1CD57FFE53F4C467C4382636FF91
-:108D6000954D541E23D1317E3687E38F8CBF0AE99F
-:108D70007736C7D3CF057F2A2005C09FE670BCDDBC
-:108D800064A67A34F2C35683866F3C130F726ACBA3
-:108D900080FABBBA5CC357AAF9B82BB9DE7E2B099F
-:108DA000A07E724AF2627A7A0BD3DB6B2C4750BFFB
-:108DB000E97984E9EDB5C48FFA8FD6BE59B3539DD6
-:108DC000AF6B53E7EBDBD5F99E1C0F8ED3B3A5AE8B
-:108DD00018EC8AD50FBF8B76EC6AC15FBC6AFE4285
-:108DE0001571C65F1EBA06ED51DF986F3C4D4F6F8F
-:108DF000C5AAB8D0DF029CFAEC352FB2F81437615F
-:108E000076821EEB88F9704E251A79A4E527799CA5
-:108E10009F08FB86E02F7984C9237A8E7DD7418213
-:108E20007C5CABD7F5C473BD979FD384FE9307FAE0
-:108E30000FD0D3350D48644139647FDB2487C89F48
-:108E4000798566C073BE99EE6780976CC971595475
-:108E5000F4F005CA9981CF7BEA720DBD88F3D62D57
-:108E60009C5E668127858EFF7BC981E7BAC3B732D6
-:108E70007A99635987F4FAD16A462FE2DC77E5E7FD
-:108E80003C87FC4DCE797D741241F55E9A1E4917E0
-:108E9000E77CE68FAF97181DD4557DF818E8CF8290
-:108EA0002F1C6E24F1FA103ED134CD64063B4A9358
-:108EB000819D83AAA67F5CBC3484CF38224A1313D9
-:108EC0004059EE8847FB6C5DA47A9C66A9F3BB7F92
-:108ED00080F3D24F23D14ED4FB304195A477EB7071
-:108EE0008CDB3E6B607E52319F550777EEF3C37E7D
-:108EF0005CFFEB083D959F3592F7C55A5AB6C4E41E
-:108F0000CA86716A743E23B36376A25F578C3BB006
-:108F10005DD683F2D5F81A93C3016910C6E1D2EF8A
-:108F2000D9A1FEB5D1898C4FDF11EB2A48880FCA31
-:108F30004B613FA45296A4C604FD26C1F8066637CD
-:108F4000F90B715C32BE6163887D9EB60F1B8F5634
-:108F500096C0F8F5F729CE61DE07A31DE5309FD353
-:108F6000DC8F7B9AFBFD4E47313FE0CCBEFA2C757F
-:108F7000F1F434F7139E8E51FB8744BDA509CC8EC6
-:108F800072B2D16CDEA807BF3A316F1C4649EC21A2
-:108F90005303C6932C6078EAD913BD6D5388FFA59F
-:108FA0002EA1F4FB309F7FD89C3743BABCF5B83173
-:108FB000D40EDF23B1F3770FA7979E08968A71EB43
-:108FC000122ABF0F78EC99E7473CF6E5C78ABC1335
-:108FD000FBEF99C0F86B5FFE3B2C4FB8DD43D8F533
-:108FE00007F2F769FD7B54D0B0734004B3CF6BFD3B
-:108FF000F30B053FE3FEF9059C1F2DEC607E8245D7
-:1090000066D29C4ACB177724B2736E94275BE59F98
-:10901000F7445E513C86A0CB9EF4CE3E7FF62321E2
-:10902000FEEC3AEECFAC13EBDBAD5EDF0309DFBA4B
-:109030003FFB818430FE6C6DDCC38BA0470C0BE2E0
-:1090400061AD8DC1AD42AE2D077B6FEF728271E8CD
-:109050006BDF5AD604F6E0B53F000B2AF231D4A7F5
-:10906000EB389C075A57BC534714959D7D105142CD
-:10907000E69FEC8A51E551430F89034DAD4E51B542
-:109080004F6F18AAAA3F64FD35AAF24C4FBE2A9F23
-:10909000D572ADAAFE55AD65AAFCF087AF57D5CF06
-:1090A000234307A3FDEC900CB62172B5B74A553E99
-:1090B00072E72DAAF69F9186CDE369BDDD42FE7968
-:1090C0001C9DA38A8371CE396D4B55ED9BA4B6626E
-:1090D0001FF0469FE49368BD151C5FCB3B99FF6270
-:1090E00074FB6A55FF67A3D83D18AD5F96762EA333
-:1090F0001ED62E9147A4FE7EDAEA8EFB9B21EEA8B7
-:10910000BFBF96F24DDA6E353DBF80FEA6D56F8E9D
-:1091100026703F5D0A496174ADA50B0BEA7FBD5B0C
-:1091200065B427E691EC87C623BC0CC4ABF4C75FDB
-:109130002F6176AEDEA7AD7688FF59F5D632A4470B
-:1091400053929A2E2214355D448E50D385D5AEA607
-:1091500083C1256A3AD0C23DDAA1A60BE2A7FF433C
-:10916000E02DE02AE01E3B554D375A78E79300DAB0
-:10917000D9DD5EC9EE2361FCE2EDDB705D97D21FA5
-:10918000F5896AF8161C703459106E2CBE4CE861D3
-:1091900026AEFF68FD1342AF894BE47A15EF47F81E
-:1091A000179A250FEA517DFEC2125F862F13F4A78E
-:1091B00006C2EC44CEA4C4F07646FC3E909D51C05D
-:1091C00075F620262F6B8803EDE12B880BF9DDC99E
-:1091D000CA5BD13EB4CAF263F4BB9EAD627A52352B
-:1091E000F1229FBFE2B802AA879210FBAB168E5203
-:1091F00087E4B302BFE1F22085740879E0C27813F6
-:109200004A86E662951F47ADE782DF30847F09BD5D
-:10921000578C27E029F89A18CF441AE424D8171A53
-:109220003E474668FD486A3B8DB0F3E06021FE2270
-:10923000AD5D26440F6E91E938F290CC2642F1578D
-:109240006073A0DDAF8874CE87EF25E6B626BDC279
-:10925000ED1357933EFBC480F2EA12FEE8591EC993
-:10926000FF68667F3FB4F06BD3E59FF8036D3C5E0B
-:109270005210EF552F0F8F077AEA6FA7B41F7D8525
-:10928000F623EB02B1A1F6C3BEFB06921FD7731300
-:1092900071DC4D42F41037699B3C3F13ECC4544ED3
-:1092A0004641CAEC58A45DAB07EBD18EACA32B01B1
-:1092B000BAAF21217EDACC6039E6E5FE7911377448
-:1092C000297DE242A28DC73FB07827C2F9A0385F5E
-:1092D0000E749E13711470CF16FC21224EA8399182
-:1092E0009F8373492EF44FF7DBA644B41FD0FD29AA
-:1092F00085EEC7BEB8222CEFB71F35EB177114B23D
-:10930000B510ED42CB42D77B19F0107ACB6FA83E57
-:1093100080F7341215A6D70D3AF681038A0B3B5518
-:10932000719EF5467A80017BC18B3C8EAF4DADAF0F
-:109330003F9BC8E393F839E752F01A181F3CEE4EF2
-:10934000E0E332F530117727E0F8427FB8EF51C102
-:10935000B5EFBCD807F73DE1E02EE072AEA8F329E7
-:10936000C0976C3D9200F0EE8872EE83FAE947FDFB
-:10937000A7245D705E157217C6CBF6B6CB783FCFCB
-:109380003D81C55BB9F7C8C81ABA3B4CE837AD6E2A
-:109390007F1DF5C2AE46CA68A91E76A6910EA9BF6A
-:1093A00088BD4003EF81CE47623D1F68D62FE2752E
-:1093B000E83A7F7F0938FC3E1C1C2AE45183E19E79
-:1093C000575F9C913E905115421FDA756CE6F4B0E0
-:1093D00056EF3C01FD1DEF4CDB0CFD55C81D07533E
-:1093E000003EEB24BC7F35D1C4EECB26F3FB7425C5
-:1093F000FE063BDC374E4AB3E0FDA9E1DF919DE07C
-:1094000017FE78DD6D31704F4CF43F5CD2E1FD4EBC
-:10941000429EFBE48E42F0572EB06FA2B98526160D
-:109420009791F9DD485F16E523AF1A8919F6A36114
-:109430006803DE6B0944CB68B78C93C924A03B3129
-:109440006F711F567C87FBFA70EF527C9FD81428EF
-:10945000584BD30E4E0F62DD13CB03050D9620FC47
-:10946000455CA6163E5B383CDCF1C666D017BBCD2A
-:10947000E2FCC95262D3239F596766FBE6D855E2E6
-:10948000FCEDB3C2B9D41DE1183C06F6DFFB32791E
-:1094900092267FB1390647E3FA15D4C7D7D958BB0E
-:1094A0006E1E07BFEEA3B244885F8E6F0A1F6FA6C1
-:1094B00024B1735C2DF7EF8BEFB57A1FC68DD542C3
-:1094C000BC7641F0FB95C66B8B78FC01E110AD27B3
-:1094D000FAD178EFDC79B17AAFFC4B0E7BBEBE3EA1
-:1094E0004927E20FD1EF4DCF5B61E30B4B93D8F9E6
-:1094F0002A1807E8C77BC37DF1857B4A13C945CE8F
-:10950000FBEEF30E55DC9F8837779F9F84717EFDBD
-:10951000FAA5FD2996605CE140F0DF92C8E6E58699
-:1095200078BF82D0EF0AFBDE374E1C8FDFF347C1D6
-:109530003EFD45BB8CF7EA7F714837757B9879D73C
-:109540002731B85D13AFC77D33D2471CDBC28C2FE8
-:10955000EA89FB35E29EAA767EBBCBFC8B60FE10CF
-:10956000471C6EBCA59C8EC4BC77C7307CB8F799ED
-:10957000F09E05ED17E3BD77C7F857E2BEB0A9F13D
-:109580007C3BB7D7ECBEDE9F81F7BCA6313BC34026
-:10959000F4E08D72FD04F5D89B69654A3FC5FA0673
-:1095A000C916B2FF2E450F41B8EB5478ED0F772363
-:1095B000E257F4FBF961BE4F89C302E7B7255CBEF1
-:1095C0002DD95183FAAF381F7DFEB08CF1179F1350
-:1095D000E627F9BC55C2F3CF521721EB291F5AF9E0
-:1095E00064413388B92549845C17C3BEDF09E94665
-:1095F000B59F7CF9BDFDEC872454AEAE200D2857F5
-:1096000056FE58DDAE9ADCFB67D09FB4FEFBE1DC72
-:109610002E27D6B139899E4740EF2926C5201FD66F
-:109620003EF985314A19781F9CA67C77981EF8AFC1
-:1096300019D3AE461BA6BF48723C9644F1B727C962
-:10964000B50DD29EF759FFBDB5BD4C7E6C8D43B9AB
-:10965000D564FD2EF2757908E3EBF7C03B09141EC3
-:109660002613D39712740D7214EA2D5EA487E3F1CA
-:109670006BAA6662DE9E04741FF7CB295331CEEFCE
-:1096800097910E80F7A652471ED8253655B27B9982
-:109690006613F3B37B7F31F63570830C6BBBBF0C65
-:1096A000CEC1B68EFD3EB0F7B4E8FE7C10E2575A4C
-:1096B000AE63F18B093AFFFED490F1E223BD49E09D
-:1096C000878F1F69C4388F38B934AF21245ECACD63
-:1096D00071D1DB9E8576C21E83B01BB645E0BDA866
-:1096E000DAA183818F5C43189E45DC1BCC2154DFBB
-:1096F000EDA27084A04B91BFA64DF219A2F0FD120D
-:10970000F4E3D4DEE54B980F72EAE77AF48389F943
-:10971000C5BD9A5C06FE2E219FE64B366647E3FAEE
-:10972000FC3C22FE317FD95C4E27F3B81E3F3F92AE
-:10973000C17B29B16740BB5BCC244A47B7D4FCF25C
-:10974000B6225C678D211AF405E1F71958CF086F2E
-:10975000FF723F6565F78DA54036747286C2E76279
-:10976000FB30C0F9B23B9BDDBB23C38803FC8CEE0E
-:109770007DC3B7817DC23488F9AF297F3297E4A3D6
-:109780005E6D8673D4ADAF44F0F8222FBF4FECC8A6
-:1097900083F89CFAAAB47C8C13391AC07737BA0DB7
-:1097A000FE0CDCC794EF4854360EDAF2FD197AB895
-:1097B000AF9942F5359A2FD9722FCB0FF5AFD4D18F
-:1097C000FC922D4FCDD0D3FDE1BEC67F0AF2355BB2
-:1097D00076B17CBE7FA54CF3CD5B5E65F5E160495B
-:1097E00009ECC12D07677868FF67A2B9BCB7FBF128
-:1097F0009EB5FBE5E1BA503B6B6332E35B67B89D16
-:10980000F84C26595C05F01E11BEFEB2641D0F5ABD
-:1098100069C554AC57B42749E1DB25F3716EE5F710
-:10982000A32746929608E6B7F344513C1CE8188EED
-:109830007EC7AF9362989E6EF3E3FB38A21F014F81
-:10984000D19F187735C867E0CB9A78ACEC64863F37
-:109850003ACE461C679883DD2BAE4ACB03FC51BC45
-:10986000E939DEF4ECFCBB8DCD8FF61B9D8B72A02D
-:1098700000ECF807BEA2F53383F3D6D24941329308
-:109880002FB736317F6B203A0BE96962247F67A5D9
-:1098900050BD8E660E87C6E4687E6F46C02B51C2EF
-:1098A000719A381CD3FC78CFF24AD75DF11F5A77F2
-:1098B00008BE1CF05ECA81F6ABB7B3F5C4F07BCD31
-:1098C000FE8C18D4F7EE57F5776683A67D09C1B8EC
-:1098D00036774C16B6BF278298F13BD9DED72E33A8
-:1098E00097E9ADA0CF8A772C88E73A12EA47EC7B5C
-:1098F000AFA28DC56706D739A390AFD3C6D769632A
-:10990000EBF4AAE8951C0964CCB6F6A7E33EF8F799
-:10991000F5372A9FF7A7DAE7E1FA837D3D105ED697
-:10992000733AF9D6F022E6A981671F9C35F313F04C
-:1099300084FD8DED46A9E952CCB326599C9335FBA5
-:109940003BF31B8E57CADAD5DDCEE2B989A2A6EB6E
-:10995000BADD993A882B10ED6AC127101FB4FF3D7C
-:109960009ACCED8969246D80F8C4C7938BC2DA0D57
-:10997000F1BBF69CD813CDE2D5B5F68A9E787B274D
-:10998000DCAFF49C63EF0A8CD3D86FC0CFF49C2576
-:10999000D82E285FD4F9739C3FF6B73F0532607E1E
-:1099A00085A6B2E7153BD547B61C437E5D38B8ECBB
-:1099B000B64C9A7F35F98FC8CF0B53CBBEC8A4FCE9
-:1099C0007C7FB29FE547967D3114F25BFCACFE4490
-:1099D000C7F3C0EF89C73F63527250AF782D59412A
-:1099E000B8C9E53A027464022586AEC7F4AA09E351
-:1099F000F6045C074A0B4DBA8670F76FDFEEA307DB
-:109A0000E65729813F15B0F3713B805FAFB203F495
-:109A100044B17BDF3D7BFF8EF75D3E487675021ECD
-:109A2000EA23BB1665D2FC5D919FA01F4F72D03D0B
-:109A300001F615C54616D0F94A5D9B9CA03F91D50D
-:109A400076B31EE1CAED5E748D1728FC5ED9F7F37C
-:109A5000EFA5B2619C308FB19C0FD4EFFBF26FE0A9
-:109A6000F7AD3F63B183F97A6CC796DB40FF1ADB31
-:109A7000F1F6974C0EB3FB3962DE63C1AE49BF9776
-:109A8000B49B70FE633BAE5E01F5C7FDB6230BE8E9
-:109A900064C2315F13B0859EBD2FA5AAEEE590CFBD
-:109AA0002E1AD739A0DF4DC0E353AA540D4678F4DF
-:109AB00032787C85F167DDF1879BFD68FC54DF7FA0
-:109AC000A2FA3AFA917BC9203BF833C47D7AADBD46
-:109AD000F468255D1FFD3E21406710A24F4F3C6F8B
-:109AE000A68C24982F25D1AA7CB9395955BFC29686
-:109AF000A92A9F9274B5AA7C9A92A7CA4F1F315681
-:109B000055FF067BA92A7F63C93455FD4A47A52A1C
-:109B10009FE76B53D52F38D4AE2E3F4264C043FE2F
-:109B200051FBEB90169D74A0D9B5F874C3EB908EE1
-:109B3000FD0B0387D65E7CEDF9B6D7E1BBB0176BA2
-:109B4000EF3309FBF1CDB2C56B0C6F274ED2670521
-:109B5000DF1F9075EC3ED318ABEBEA94A2E07DA634
-:109B600089602FA648A8587CEE47E3004F0B983D2C
-:109B7000ED282006E3BEAD68873C6A6878E60F2CC6
-:109B80000E201DF8DE84C05CD5BA279E77A9D65D6D
-:109B90004A6ED5E0698D2A5F61BB5D557F4AD2066A
-:109BA00055F934E5071A3CDDAFCADF60DFA2C1D347
-:109BB000360D9E7EAE2A17F4DDC1ED5AFBC01E4560
-:109BC000D3F1FECE72C0C375A703888F92CED67232
-:109BD000C0D3B547DB105F853E6739B0CBE2430D9C
-:109BE000AF43EAA3E73168F75A6312A6071A15B420
-:109BF0006B1D6C1C81E9A1463B7EFF756309A6EFD6
-:109C0000343A307DAF712AA69D8D4E4CDB1ADBB005
-:109C1000FE738DEDCC2E16DBF7DE453AD807BA750C
-:109C20007E377882173F927703F0CBEE41FE6EC805
-:109C3000DF45EC374CA2F925C044E8BEFC294F377C
-:109C4000A43A028057371CCA8A82F1186D3A471E1F
-:109C5000E8E177A44CF8A13E9D90BB3738936CD1D6
-:109C60002C6FA6794436C6B34DF8A18312D73320A2
-:109C70004AD0A933E106C8F744B07277CA841B40C2
-:109C80000FFFC6FE73473FFFF91D2961FCE7CF9C1C
-:109C900056AC60D739FCD5702BC0E330B76F39486C
-:109CA0009E61094D4BF5790690B34707B8B7F08030
-:109CB000AEB409E0D0A6B3CFC178EFEB0D04E8B79E
-:109CC0004A62E75F51CF95CAE441CF0D263C4F1D54
-:109CD000D13956605C9914780CE0BC3DA512E1DEE8
-:109CE000630D6400FCBC294E968F0F3C26D943F2CD
-:109CF00006069F07526EFCB6E1F35838F83C9162B5
-:109D000063FAB6CF910E7A80C81FA974D4C17E3E83
-:109D100052EAB80AEFCF384D6CFF3AADDEABD03E19
-:109D2000E4289A1362E719926A60F7D1E16222D8B7
-:109D30003B6F91719F6BE1392195E97B482770CE8C
-:109D40009C1789E782233AF69E81B6FE020ED7B3AE
-:109D500083C2DBE316A632BDA26C56DD332FD0FEE4
-:109D60007AD64560D73DCEE1A88FF53450E82A3445
-:109D70003DDD708E959BEC1C24E8BF9D0F7FD1F2DA
-:109D8000673A6EFBEBEF68FD4FD645DA5186D8AEE9
-:109D900041F8DDC22B2F8C35A3FEB4B02ABD0CE4F4
-:109DA000E27CEE075C64D527A03B501F6D8427172B
-:109DB000975BF29A2904C9CAB84A233C25559DB637
-:109DC000A619D2D5C3EE37C21329B5A37635831AA7
-:109DD0005B47B77011F23FFFBB8D745E8BD7CB0A28
-:109DE0003BCF89FBAE355714CF22E8F7088F3BA253
-:109DF00040C0F3EA220E6FD16E1187D78914AE3FAF
-:109E0000E6909C0B6A3FD66740EF5D0BDFCD1EC02E
-:109E1000CFA02EE7FAE3074636AEF6FD1231EEE2AA
-:109E20005476FE3A62A49409FAE42D4C0EE4CEFD79
-:109E3000E2AE22BAFEDC0E9B0EE31516D7BD00780B
-:109E4000E86DE778349076D84FB33C4B3EF91D224D
-:109E5000264E758FF752F2D2DE692B0F9597857ECD
-:109E60006779A8BC2C09B496835C14F251F84F7D35
-:109E70008DD59C2F37203F3DD0B81EF3071B3D9852
-:109E80001E6A6CE17CB915CBDF697C98F3652FE71E
-:109E9000CB3BF17B47E35C4CF735BA583ECA19958A
-:109EA0000AFBC4ECC2F8C437B69808F8E77A3B4C12
-:109EB000189F4177C4638FC641FC9109EF716AE333
-:109EC00090B47CBE8F1E76F77B372505C6E98B1FC5
-:109ED000027D71C8C0F474982856E04BF98FFEE4F7
-:109EE00006D0AF0F2B8A15F4E982D4CD2CEF50ACFD
-:109EF000069A2F7C94E75D8AD504AC22F521E45BB9
-:109F0000873D8A3582E68B1F7D88957B093AF3C7AA
-:109F10003DBAF5060FF059221D80FD516ECE9C44CE
-:109F2000C50595D7A507605F4C495A3209F6C5CEDD
-:109F30001405E9639AB2E100E4A78FD8A687ABFACB
-:109F40000E4BDE4668571657A9877693D2D66C8497
-:109F5000769387DDAF0F6D3775D4AE8D909F61DF3F
-:109F6000A607FD7427F0B1F8603F222FCA059F169F
-:109F70007172A33B9C280F72DB9D280F045CCA669C
-:109F800057DE0DF6CFFA76C926C13C664B7D410AF5
-:109F90001093E886F74929BFBE3EF597D60DB45D0C
-:109FA0003DE4AFC5FC0F377CBBFCFBA6D430FCFB0B
-:109FB00043BEDF41DE43DCFB8746F60ECC331C2E6E
-:109FC000F51D4BACF88E2A715941CF7A9ECBF39791
-:109FD00020A5E59FF1B48B7F7F40E770C138AB527D
-:109FE000B91FB23F7FA84965FB5F738F648072CE53
-:109FF0001FEA526DAAF73CEA08BBBF76A9383B6D51
-:10A000009CB836EE6435693BE8C8EC1F6F520BF71D
-:10A01000DCB2FAC77F8B786A6D1C78DFB96A10E30F
-:10A02000A77381D750BA6E491D904FDE7B0938DC8B
-:10A030001B0E0EFDD643589C7BBF38241EEFAE5D31
-:10A040001771C5B3778D79FCBB767D822EFAAFAFE1
-:10A0500095C15FCFE04FF5BBC7607E158BAD04ECBB
-:10A0600056A1FCE77717E13F5A7EF66DF1C99B17C1
-:10A07000D7E1BB6561F8D8F3E1F898B8CFAF4D856B
-:10A080009E0AF7F3201E12DE3982737E65A26B1FD3
-:10A09000F4D35316F89B0ECEA171ECDDF083D1AE54
-:10A0A000FDF05D32B2B80611977C5AE7F915E86DFC
-:10A0B000EF3DFA19F2B36E1016748FBC41F3A097FE
-:10A0C000FDC3E67C13E04746F88DA1EF8F0F147FA8
-:10A0D000FB1B2EFFFAA76CDF8938D49E6D5F66A04C
-:10A0E000FDEE12FB62207854C8E3FD703FA4B72454
-:10A0F00012E56797447CF0DE71576902EA2D5DE94D
-:10A10000463DA4DFF6B9B82B3D1BFBD79E8FBB9213
-:10A110004BCC6CDCC953217D2FF95421C8BDDFF035
-:10A12000F8CB76A3A7E03DB00F8F8D40FFFE8D9258
-:10A13000BF10E0A03D5777BDB5A04CC9ED7FBEA6CE
-:10A14000EB9B04EBAB3DAEBB1BBE5DE979BB76FD83
-:10A15000DF08C4B98F5BFF1581F7EFAEFCFCDD199A
-:10A1600093AB805EE16A021219D345F5099ABF5498
-:10A17000FCD639899ED33343CEE5256FB3382E9E66
-:10A180006ACFE7FDDE095CED51C70D96FA8A305EB5
-:10A1900045F647E1BD601D7B6F43C473BDC9CFF376
-:10A1A000F4BC3E240DED709D19AAF3FA1D1F2DFA83
-:10A1B0001EF281088CEF78A6FD443CCCF58F9DF112
-:10A1C0003F794509D277BDED6F24F49DC0DAF5BD26
-:10A1D000AA7CD786E0FB56701FABF65F32CA252AF1
-:10A1E000C75A104FE435E3DA10F94ADAFEDC07EF1C
-:10A1F000D194DF5502C050BE36CF74D07695FC3C6A
-:10A200004448E48D0EDAAE929F1F8967252B8FE7B5
-:10A21000F53D9FB07CBA28FFE34CAC7F95E86F1CFE
-:10A220002B4F1679DEDFD5229F782396678AF62595
-:10A230002C9F23C6AF64EDADACFEE4ADFF9C097A64
-:10A240008DE0F733D2B89CE0EF5251FEEF4C2BBAC1
-:10A2500068BC8EBA9CCB07F10E55C51DD322DF8595
-:10A260007DDC2661EC61ED9D06B4E79F8D69CB0D29
-:10A27000BD2F2FE27A9CE5568CF3AA7B71F8769974
-:10A28000C73B811EB39CFBE92B640BFA617AEF6537
-:10A290007C7E203D70E5FA9755F8EC57CEDFD3462B
-:10A2A00047251DEFDC0F13F17E0219D689F102EE6E
-:10A2B0003449C427E0BD6A11571797451C707E8E3C
-:10A2C0007B2982BDA77AB213F9EFCA97987DBB6E3E
-:10A2D000CBEB28EF96CA0ADA97BE1EEA5A07F0E9D6
-:10A2E000B6B2772F57AEDF87FBF431C5C6FD60816C
-:10A2F00051A1F0BCB33FFC3D69F11785BFBAFC3FEB
-:10A300000C7FAD5D5DDCD75F7D85F17FDD56E607B7
-:10A31000B6733CFD49A71473783D02F03AB7A233F7
-:10A320003B5A8620EE4E8C77AB90DF2982F3566F36
-:10A33000839500DEBBA5CEDC0FC3E05F7BAE389F0C
-:10A34000415471693BFBC3F7E94BD0F7D3FF4DFA9A
-:10A350004ED4FB8D76F01B1F65EFE51577FEC9180F
-:10A360001A1FF44E1A3B070F6E677E311117172C18
-:10A37000B7323C71FF535DD53BE3C1FF24F6C3C444
-:10A3800048D206FE044AD7764ED776A06B41BF412D
-:10A390003F146D1706BE41FA252C2E91C3E9B7FD77
-:10A3A000E1FAE125E0FAE17F13AEBBA93E8CFEDBCA
-:10A3B0001722D04EA385F33F385C05BC23D32F0E64
-:10A3C000E7C8F4FF0C9C23D315959D43C07B20F96F
-:10A3D000A4C58F9877987D5AF44DF6E923199C4FC0
-:10A3E000E9FD188FABC57B4C7A3FBC27A45F1CEFFF
-:10A3F000EAF2FF30DEB570D3A6B5DC9FABFD5E9808
-:10A400003E20BFFB56E0F87FCD4FB0B061BFAA7CC5
-:10A41000F1FAB754E54B3CEF5F965F41D8FBFF5B29
-:10A42000FE05E15798F9FC2A1DF81FB5F24137C423
-:10A43000F923A0C71B5FFE7AD48730F9EA6C8CB78A
-:10A44000BA8DAFE58BF17FFFE47B94BEBE6860F60A
-:10A45000D663FB3F372839FDE965E1791D7184D06A
-:10A46000D9C2F5EF1B40CF5A48D8FB54DAFA0FA6F1
-:10A47000337B30C64951BE30D74C0C71941FCC9DF4
-:10A48000CBEE4BCF0507630CA63E172D9FA9273EA9
-:10A49000788FBBD2A2F799D0EFA9BEFF6EE2EF751D
-:10A4A00093B858D53D78D921639CDF9C12E62FBD27
-:10A4B000C5D286F787E71DBAEBDCF7602F6FF4147F
-:10A4C000B1B87771FFF0F7BA2BF1833E087A2A9C76
-:10A4D000FB24EE5F5F6340FFBAB6DD2ABE9F66CA0B
-:10A4E000128BA3D9C3E233C5FEA4EB3B64CA67F762
-:10A4F00060E0F7482A1B0CBEE1B9A067EF473DBBFF
-:10A50000BE64432EE0AF7E9274DC941B3CEFD4AF6C
-:10A51000FF0BB6D7F2676D7AB9F6D54F1A0F21BD8A
-:10A520008873D1B1461FE6B5F6D60513FF17FD9324
-:10A5300063FFE26D8274DC578E0FC7D075FB1B3B47
-:10A54000FF2D7B82B02308BB82D64E21F88878BFCE
-:10A55000D2976EE3EFB296A2DF83E8592AF8EDC1F5
-:10A56000FEFCF9D7E917D727D5E5FF61FE7CB9F4E2
-:10A570005F9BC4E4AA96EE8F56FD0CEDCF82BEB56C
-:10A58000F4BF006252E8F80BEA25BC273E7755ABD2
-:10A59000619CF4CDE97DB5E56406839B462E5CB1F4
-:10A5A0003C50783C878CE70B93BCC60E760F8187B6
-:10A5B000AFD3D5EF0353BC48191797ABEAF2FFFAB4
-:10A5C00039E0E4A26F2617894A9F48CBE8B76EE5C9
-:10A5D00012EB56FE9BEB0EB9A7B448D605EFE3404D
-:10A5E000FC35C481F678D9FDD4EACC56FCDD0352A3
-:10A5F0001288027E77EB5E99FD9E8EDEA14F0E796A
-:10A600003FAD8BF83E007A5C359EBD3BA48D9B76BA
-:10A61000F378EAD596DD78BF51FB0E9A88CB76F3B6
-:10A62000FEB4EFA189F6E29D03ED7B685332781CFE
-:10A63000763EC967712917E7A3DD20CF43FC35DDDE
-:10A640005F35A25DE1C6C74AEEF3A405F13227A348
-:10A650001FDF99977171BEA32EFF2FD3AF6CDD81E1
-:10A66000F7D8AE947E47643ADC407F822FF7F19BA7
-:10A67000574CC86FC43BF33D6B9EC1F7877ABE242D
-:10A68000E897BDD43BE313BBD835C40927BD4D566D
-:10A690008AD771C73C68AF1B7BC485F776C7BCE31C
-:10A6A00080887F9277C029C3BC853E23F49B20FF1E
-:10A6B000E2F7D9789CD5E5F2B92BF537FEA7FC8CEB
-:10A6C000E25E5DB7C15704BFE7E0D91381BF03A1C4
-:10A6D0009DFF9319BA8BBE93DC11E57A12F0348B8F
-:10A6E000CB09F15E7285CCDE49EFED94D15EB8EE18
-:10A6F0007F7EFBAB47954BDB15EA6DBD61CF6522D5
-:10A70000ADD7B17B2DF9E50AC649C2790DEC87C2F8
-:10A710009EA8AD7F4A297B2903ED5BE3F13DDADE9C
-:10A7200087D97C06C257FDFA008E3F60391FBF7E75
-:10A730006F912DF49D95F3197DE743DB297310DFAD
-:10A74000974B17FFD7CE2D3365E291A87CCD91BCF6
-:10A750004CEF254CFF5D403A315D440298BA08BB8E
-:10A76000CFB094D8315D4E9C98AE555C5D191837CA
-:10A770001448C0F8D317FF390AE8E6DC75E35A211C
-:10A7800046F1DBF22369F5BE9E3C85BD97F4C23FDE
-:10A790007F07F4D9F33F86CBE21B47A21C6448181D
-:10A7A0003FD37BA532BBD754F25DDC17E2FD5D32AF
-:10A7B00089F9E1962766E2FE09F2CDC46D826F82C7
-:10A7C0003F39E7B88EC5C3DC2AE17BC6ED7E1D6E3E
-:10A7D000B19C15995EF8DDB9F6DDAC3CA72EDA2BFD
-:10A7E000D17CCED80856BE26DA0BF74F16123FEEB4
-:10A7F000CBC570FB4486FB4B8C2F8ADF0BA02782D6
-:10A80000A1126DBFA2C3CCEE5110FF30E0FFB970B2
-:10A810007E0A174F3384F1F1D14319BF1F5DA6B6ED
-:10A82000870CE5E5F72965DF0778B40C71640D81C5
-:10A83000FA319D9B1E2C043B908E809FE6B3B1B7EE
-:10A84000A35F53B47B51291B01F59F9558BCBF678B
-:10A850002FBF6F4C0209A1FEB1B54A792ED42B1A35
-:10A86000C2F8D3407085DF517486392F8AF8D1D170
-:10A87000706643BB3CC177D29E95587EF2E35B6F16
-:10A88000DC68415F8207F4E31715D744186FB49171
-:10A89000100BCCFFA7FC7E1B69C800BBE8AAC74C05
-:10A8A0003AD02F3EA2E218EEF7FC819EB721FD9828
-:10A8B0009E9B21FD233D37437A9C9E9B213D41CFAA
-:10A8C000CD90AE386F87C7CCC989218EB9D0BFF083
-:10A8D000F769E75B3984F1D7BEF1F71A71FCFB1415
-:10A8E00017C2B70FDF7B08FEDEEDB3D18194988BE2
-:10A8F000D05BCFDEBFA39F7420B808FFA3B67C0A4D
-:10A90000C76BEE6E3DCAFFDC767FD4CA907A2B8788
-:10A9100018B17DCE0B27A3A0FF6E5B1F7C1D125DBF
-:10A92000F24C1DCBAF7CFCB91B378E82F93BBE0FBE
-:10A930007441F7F96A4873DB7FFB00FC5E2AED1F68
-:10A94000E3247AA4C0663C2F68D6A1858358D7B388
-:10A95000D19D9BA0FDB32F0C859550BE43D8BE0161
-:10A960003A92C2AD7703AEE74653A010EE0BDD7806
-:10A97000410E1BA77D9F528A704E067A43FEDDCAA8
-:10A9800053465F026FDF747F6BFB23E2FD15E0A58A
-:10A990000AC8A5AFA2402FACE4F104EDBB87FD06C9
-:10A9A000D6E9392413F8BDDAD131EAFDB78BE34992
-:10A9B000A4397B8D4EC0D7B37B4F0D83F789297E99
-:10A9C00086C17BC5DB865C45427FEF3167EC978FA4
-:10A9D0003C1887F5F1F769E7916D15103733DFBC47
-:10A9E000FF0D58D242DBF10A889B599C241D8474C8
-:10A9F00089923919E265C47D8365234A0FC2969A0C
-:10AA000061AF447DAE14984C887C283747F247D814
-:10AA1000853C8A55E5A724A5AAEA4F53B254E5D34D
-:10AA2000478C54958B7167D80B54F546C70486C282
-:10AA3000798EAE83BD03FFA48CF186392F1CB97EBD
-:10AA400024CDCF7C6A0EBE43F92C2F9FF95CB91739
-:10AA5000F0D143E169A40AD5E9921F6C7E103AD384
-:10AA60009C176AF73E71D0A15CC679E112E7848138
-:10AA7000DE4F16EDB5E704CA371F00BE39FAC5D957
-:10AA800036F0DB3E3BF6CB148847FDCD10FEAE0C16
-:10AA90003F3F0C44377DFB435218DDBC259327C351
-:10AAA000D00D44F2323A64E9CCC3EC7EDE95F2B5C7
-:10AAB0004F81AFA1BDC043427F7F576BDF1B6DB499
-:10AAC000FFE636B047BD2BC30DA5BE7B932BE16FD0
-:10AAD0003948EF64F9B6BB93E3F0BB07F46137B7CD
-:10AAE000F70D52B83E55BBFFEEE4C2603959775CB2
-:10AAF000559FDC2935ABF21B33D5F97B4B9B43DBF0
-:10AB00000FA48FAD7C7889D19503F76EA5B0BF37C0
-:10AB10002CE6F3FF010980D5200080000000000032
-:10AB20001F8B08000000000000FFB5190B5454658E
-:10AB3000FABBF7CE0B1960782810427798440A8444
-:10AB4000895728B08DA01ED7DA1A4C8F545693E53A
-:10AB500003794DE0B6F4D8E318AD8FB6076D5B69A5
-:10AB60006B355696E7E439B144462536AE5B49EB82
-:10AB7000D654A266E499D8424C70267A6D9D5AF755
-:10AB8000FBFEFF5E672E605B9DD64EE79FEFFFFFEB
-:10AB9000FB7FEF279014CA70CE0008F6ACCC7099FA
-:10ABA0000106F7D61AE41880D3F4EFE2F0DAB8F928
-:10ABB0007A8303CF5700383ACCE3CF01D601140390
-:10ABC0005C29817BA2F3145960E760FF65F1BD2F1A
-:10ABD000010849009E178DDEED5684E35C06676E22
-:10ABE000F89E8DF04E0618D972FFEFBF2AC2F525E8
-:10ABF000B0E30E8CC4430DBD9BD7755C1471CD9F23
-:10AC000004D7D17779968098806B7055B407E200AD
-:10AC10009A6A633C623E9E67860E992E04C8F1A62E
-:10AC2000B59B52018E8A22C039440778A014EFE305
-:10AC30001B045F24A739EFA4DFB9C867CC2FC7E78F
-:10AC40004532B035BF3294E9C67BD77E87E71CBF5B
-:10AC500003A291CE3F804A8F034C5C2E04BBBD19EA
-:10AC6000FE3F233F4DBD1218909F61F01DBA5A6000
-:10AC7000D7CCA925002BE9A74CFB1D0690D86F194E
-:10AC8000707F95B2BFB27CE5A5108BF056FD4020D9
-:10AC90009BBD0FA7F1FFD57F6F3798F17CF553DA95
-:10ACA0007D420F53902FE5FB3AF0B377EB77E23D0F
-:10ACB00053F85E23DCFD9984EF367669BF5F24C7C5
-:10ACC000240DE6E08F0228382DB16D91DE6B36F150
-:10ACD000F7E64ADFBD7B09EAB1E925C96EC4ADD10B
-:10ACE000DDD3E200F98339A8E4D4F1F26BDA8C7A8F
-:10ACF0002A0CC3A7764BF3BD745F17CAA89E315EBA
-:10AD0000CE60C9E2F82C1C5F73C5D70B01F135F793
-:10AD1000E8D0D07E00CF4611E4083CCFED31AEF252
-:10AD20009AC3F4072D9CC7FC9E2F1366E7F2751D8E
-:10AD3000D101ED1C2F70BF9821803E09F141B56013
-:10AD4000DF8E4B5F4F7225C9BF4F009F5CC09E587E
-:10AD50006442FD5CC19FA37D3324E08F946C1DE1B0
-:10AD600059A8C8FD8AD27F7C23E0778B7B164F439E
-:10AD70000AE050D7B23ED40C6C906D0CDF12F0E8B4
-:10AD8000492F7DF1CEF416A4F3324960F6DF171F88
-:10AD90001A16107F5F45B4D026B0F7EFA4F755BE62
-:10ADA000FAF4CE7437E36B8E6510F526382E904E8C
-:10ADB000478F974758AE3A1854F52B7177217F9CEF
-:10ADC0002BDD3EFB12F4DBD1A5603122BD974B6831
-:10ADD0003808C3ABDC8FAB49D63351AE823F81E834
-:10ADE0006C96176E91F1BBE4D67B41971821371D05
-:10ADF000F733552FAA1CC7D3A1E22DF73B90BFD143
-:10AE00001D02B39F46BBCCECB3B1FCE4834B107F77
-:10AE1000A35FB20B48CFB2EEBD47487E1D6B3B40EF
-:10AE2000771E40E7DA6EB62E33997D521EE38BD93A
-:10AE3000AD8846417CAD5660C6A7357C1EE67B0CCE
-:10AE4000BC513F7C06CE043818EB7C9EF85BF3FBCC
-:10AE5000CFFB9610B51BCAE3991F90AD9D1BA63F73
-:10AE6000DF006046FA43DBA3BD4F303C68AF25618D
-:10AE70007B3DB127EB700B9E9F7853CFCC755FC5A0
-:10AE8000C3A76E4178CDF66826E71309E049A5F31C
-:10AE900027A67B3D7861A518EA6F21B977C6D8B798
-:10AEA000E3F9F147A73FBB13E1DA67A7D9894CF271
-:10AEB0001F19E57D3C1D01DA7F3E957D07291CEFBA
-:10AEC0000AC52FA56766DC574EE7CF24DA098FAA9B
-:10AED000BFA147A31C80F2FA127C791634BD93827D
-:10AEE0006750C487EBC49DC704B4CBDB0CAE83C4EE
-:10AEF000F7EA47FE7AA80CF9A97AE6370FCF44FAA9
-:10AF00006ADF9B0CF44E58AFE3E2406C2097FCDF05
-:10AF1000C6FD5F914FDD8E28CBC71171A6A1235EC0
-:10AF2000033775A75A3E8E883775C0650CF5828E3B
-:10AF3000F8A957FCAA5E741D25BA1A20C0E3228422
-:10AF40000C64570592E0A07810BAC7C8E43FD6CE8B
-:10AF5000466591D1512F828BE27941229852C86F78
-:10AF60005D5C7EC17BA63F7117CA66923541F5FBD9
-:10AF7000AC853322EDB3BFF115B2CFCD46669FC38A
-:10AF8000513C2F8DC5F31F399E7DBFC2F405F38759
-:10AF900033F9A4F5DF5A38171C14EF0ADAE4C29B20
-:10AFA000706D51F4722CC5295849EE1DF7EF3AC067
-:10AFB000E4B9F5E6A38477BF99E90F0E70B90705E8
-:10AFC0009E27D5F7569842A02B247AB7317AD5FD23
-:10AFD000C12D87F35CF8FEE00B397980F6BC4CF2AA
-:10AFE0000FFE05E5732AC67FEC365C3BF7BF3B8559
-:10AFF000F2E0587AEB5B47D97B2A3C2CF038544F6F
-:10B000007CE0FEF799CE64A213C3088B0F0377CDC3
-:10B0100060F29B2BE5C691FE8327B4F48DA5537D8A
-:10B020005FA54F7D5FBD37CD2A32398E18FC7994EC
-:10B03000F75FCC90357C8DC4FAF3E2CDB46FE17547
-:10B040004402C211F656433F51BF35268CDB485FA0
-:10B050004D8D606F03B6EFA1B889ABCF85E7F529B9
-:10B060002F2B7203A709ED78B162679094C8EC6E3C
-:10B070001170BB5EACC4EDABA0430FE82F47C475A5
-:10B08000BF35A0FD0D773CA07745C65DCF51F1746B
-:10B09000CE4F8FBB9E4AC8A6F83D6231B3BA669EBA
-:10B0A00055D0B17BE9904EF7F0DCEE433BF0741ADB
-:10B0B000ED6D48CFE3A2738115E5536FF0E5911F65
-:10B0C000A8DF3D2EBAD8FEB0706005E91B74BE3C07
-:10B0D00056EFC41B40C03A2338D9EE77505DF625B1
-:10B0E000B0B812D4434D27E22DAA12DD9DE6703C84
-:10B0F00054E367510EEEA35C2B685FF557B49BA237
-:10B100007CEDFD303F5AF8B895FB5D51A2E8EE9812
-:10B11000C05F6E57F4DC061D12F7679E47CB14B96B
-:10B1200063DD2245D62D8D4A9C0FC69A3C12F25300
-:10B13000B61BF5827099CEB797568C02D08AFA9DCD
-:10B14000053EFE5EB7369E530E59CAF2720ECBCB49
-:10B15000B31475AF17DC407A3551FEC2F52EC12FFE
-:10B16000D1FA2B08B1D501161DADA806B6CE012720
-:10B170005BE7819BADF3A19DAD0BA083AD97829F53
-:10B18000AD7081AF0D583EB8DD3288F9187EBD52E2
-:10B19000A4BC5CB464E27AFC71455E67970746F92B
-:10B1A000929F2F8F79E04A61749D4D2E53B399DDA4
-:10B1B000AB7231927DE27751E04DA1B50202EC9D78
-:10B1C0008BC990F19DD920EB08AE020783E7FE48BA
-:10B1D0007994065C3A57EE0472A99AD84E7628768E
-:10B1E000524C365D1CD6D787561E1754BD01D24926
-:10B1F000F960BC3E2183E82C8AAEFC5CC690F1DA93
-:10B20000B6F79D3A8CA34585952D36840F593FE5B9
-:10B210007059E5F399081FD976D2A99B49765E59F2
-:10B22000A8B76315BA6ED83907CF4D18FCA3504E96
-:10B23000924D82525C5D51B179807E6794ACEB7423
-:10B24000E857C6DB80C5195714809FD5B36865E4FD
-:10B250002735BC7E5D63E17ADB6B70BD4A7EDA60C8
-:10B26000F2C5CAC8D39A757393295F6E30F0F73F61
-:10B270009A2CE7BC827232223E5341984F3CF744ED
-:10B28000211C10E496566B18FF8FC0F7CF1FC277B2
-:10B290006B8AEB5D16CF4D5940FA4F53F2796767D1
-:10B2A000598A5D24FC16863F1093D5D28A470752EF
-:10B2B0009C1FD27BC1186E771F5AB95ECEB69A32E8
-:10B2C0001D1F5827D80FAEFB7A978FE2D02748086A
-:10B2D000BEF399D53540743489818C42D4D71DD1C1
-:10B2E000C70C6427AA1D0BA8BCA5C87F9B03BC067E
-:10B2F000E61FE59633F5982DEC07C1E5F81ECAA5C3
-:10B30000C8E9ACD2E371498D7B1FADA5AEF62A3CEE
-:10B31000213C41A2A7490AAD20BB3815FF9EE1138D
-:10B32000E6A753B93D2AF1AB674FEF6D691C744234
-:10B33000841F36EDF9E6AB0F50DF4DA3663B5D0F82
-:10B34000FBDF9616EA0BB01AD4C417D52F67751B0E
-:10B350007DD45F95ED3E7F39DDAB78AFDF4671FA86
-:10B36000E2FE401B95CBC19EC369DC2FD43AFE6B35
-:10B37000E1E7E493B9120575ACCB5E90BC46E4AB53
-:10B3800099EA0B05F6207CDC84761347F779BFA990
-:10B39000F6950DBDAF19A82FC1673CC46FAD42FF34
-:10B3A000AAAD375C4AF562AD57DB2FD6F57BD713D4
-:10B3B000DD753BB4FB6ABFD9A47C5F4FF59A8DEA7B
-:10B3C0003EEDBD26EA37F3A8FED3EE67662AFDA65A
-:10B3D00092FF40A933572A77883F33EBFF0C5E2357
-:10B3E000F2D6FC688BDD4270BAD9CEE26DFD0666FE
-:10B3F000C7EA7DD89AC86C44F5DBDA8DC0EA675598
-:10B400008EF94F1B1DA48FFCA793595D8CF53CABA7
-:10B4100047309EF0FE1E6522A0DD3D171FCA1411A5
-:10B42000CF733DD976AAB75F5EEB807F9D17A64F9D
-:10B43000ADF7E74A3BAB0CD447DD887D146E35F79A
-:10B440003ED96642B87913D00D242D3B8EEAA6E290
-:10B45000FD1278E91DF03E508E6B971A4F52B0BE28
-:10B460008F9047943C09E409FA79A3A2B7E8EC0469
-:10B47000CD798CFD1CCDF771A599DAEF3D0E7F6E6D
-:10B4800009C573FE7DBCE302CDFD36C16DF791CDDC
-:10B4900004F03FBC57AE88B1C2BF82CD1D12E71782
-:10B4A00068EE6F889DB79FECBBFC0BDD183B704BC3
-:10B4B000647765018047502FB386B5E7C507DB2168
-:10B4C00016F1471DD48D99577880EA16A3ACDD5F3D
-:10B4D000AEDAC55498AA99439C913BB7FBD1219110
-:10B4E000D945099CF7707911C9590F5E79BCDC46C2
-:10B4F00069A5FB6603F38B59BD2D768A47939D5A48
-:10B50000F927D768E59FEAD2CA3B6D9556DEE96E0A
-:10B51000ADBCCF6DD5CAD7EAD1CACFB67196E6FE1B
-:10B52000B4F64A0D3C7DF302CDFDF3BD0B3570CE74
-:10B530008EAB34F767742CD39CE777AFD69CAB7691
-:10B5400036D60E2EF4358FB13311C408FDAB7A56C2
-:10B55000EDA070FFAD1A3CFF6FFD6F1FA3FFA7C8E2
-:10B56000D731DEBD153B7437B9EB65D13CAE9D9943
-:10B570002794EB59BFF6B69C5815437795FCE654D3
-:10B58000F21B94FF91C3160EDBFDF67D14CF0A8EDD
-:10B5900038AB88AEA2807B1F85F392A1F6AA38BA99
-:10B5A000EF00D932858F9CE8FEE5A502E8347E8560
-:10B5B000F094B03CAFF0AC93E2F072D977DE36167F
-:10B5C0006EC9E94BC2F320A194E7856A4714E822CB
-:10B5D000E452A1EC0325E92961F9ABF323EC07C0A0
-:10B5E00040FD8068F2B65927AA77EC9B25568FB9A3
-:10B5F000587DF686E06273A545267F06C5F7DF25F0
-:10B60000BBDECEC4B8764AB4CBAC9E13026DC45434
-:10B610009018A3A4E5A9AF76501F87ED2CCD2BFF82
-:10B6200074476DB52797916F0994F0B699FEF56749
-:10B63000BA8E64A2FC0704CBFA42FCF6AD5927335C
-:10B64000287F1925944401CD4F1C47E9FCCCDC240C
-:10B6500019F9C3781B10650F89C273ABC0FA9093B8
-:10B66000F4D8CC08FFDDA867790B94BEEC1A455ED0
-:10B670006A5FB654C13F804FACC2787E4DF71B4C19
-:10B680002E7529C3CA1CCA6DB7E0FB374C3517505D
-:10B690005F0A8E423BEFE7D53E2D4DFA297955EDF5
-:10B6A0006BCF76BF2E6548D32FC3CEC409E7916315
-:10B6B000E75E61BEF9FB039BA2591E1AD894CEE641
-:10B6C0008BE1F74FB1F7AF71BFA3B193EB5ADFD75F
-:10B6D000D8DFF59E8F34E781A4903E0DF90FEC4A38
-:10B6E0009D7735CA6FE4056309F5ABA8B7385B7180
-:10B6F000F8FDC03DD3E710BEFFCDE7A74CBEFD6B04
-:10B70000FD6CEEA6F2796CED110607D606D83A96D6
-:10B710004FB5BF5557C3DF209BEAE59030C93ED1F6
-:10B72000BCE6311BEF83FA674FA9A47CDC9F6ED087
-:10B73000F1358BC3A9A5260ECF9B4F6B506FDE480A
-:10B74000FD6DBF000E01ED61A9E07CEC7AE4BB3A2F
-:10B75000D9956BA37A7275284F87FED0941FB8567F
-:10B76000407DBE1EEFCA27FE052C065313189D59B7
-:10B77000D4370C899E3C0163C14D4F765753FD3F32
-:10B7800034C9738A3276ADADAB9AFA832103F78F51
-:10B790005B9E7C84F9C3B716D74C7AE71341F2312C
-:10B7A0007B7E49F06E67F616302C8CF8BB823AAF80
-:10B7B000A17E9BFA9B60145F67DBF8DF5F2AC7AC52
-:10B7C0004B6D3CAEDD426B31E9E5EE2CFA7BCAE80D
-:10B7D0006623905F203E8748F87AF85C760AF2404C
-:10B7E000750D566FAC5F2878D5E8A3F8A1CE751615
-:10B7F000DBACECBD241B9FD724DD67F4B6B1FCEEB7
-:10B80000CFA8463ADBF558EF50DF7010D81C6D8496
-:10B81000E661117A596CE3FD17DC08C0CF93B7D10C
-:10B820007943EFC0318A27DF67BAAE24390C8872BA
-:10B8300009C59386D8BDACDE6BB6C9EC3BA497F1C5
-:10B840008F71E14ED2CF2F380F5C45FA6D300578FD
-:10B85000DDAACC03CF26B791E5FE8772D9FCCB9E3B
-:10B8600041F4A9F422FDCDB688B99D4A7FF89D1F09
-:10B87000F60B75AEA5C2835B3664919FA15EF8BCE2
-:10B880005112AE5B38C1F70F2AFA3E96E2F410FE71
-:10B89000D56E3EF70BDB4DFBCD4749CFBD66162776
-:10B8A000CFF6FD583E1BF6F43279209FD7127F1158
-:10B8B0007CDE1BC9E748CFE18772E59FCF5F309DF3
-:10B8C000FF1D29B8ED9B0C19BF6FD8FDC611B2BB87
-:10B8D00006751EDFA59D33182761FF9A30D11C1D08
-:10B8E000B34F445D6654BF9FAAD37E8F0539CDA95F
-:10B8F000BBC9DFA97E71F0BF8BA9F9B84BE96B8496
-:10B90000C0EB2C1F103EF287F58287E545758ED17E
-:10B910002660DE23DDBA5A589E90CE35DBC99EBB29
-:10B92000D006FDE4073A47349B5F8FE9A3BF35B8E3
-:10B930007691FCD6BC53994C7D76E79B0B947E8D1B
-:10B94000E7A962C52E8B093FD19F1BC7ECB548A163
-:10B95000AFC484F55026857C8FC4E715CAFC63D339
-:10B96000EB9A3EEFBF32596853001E000000000002
-:10B9700000000000000000001F8B08000000000015
-:10B9800000FFFB51CFC0F0038AC515191844D41924
-:10B99000184C341818566820C46989B5B829D39F43
-:10B9A000C9C2C0900DC4B9409C0FC47C4C0C0CFCA7
-:10B9B0004CC4EB171445B0F50419188480FC6F02D1
-:10B9C0000C0CD7851818BE8B30300803F92E40F1C7
-:10B9D0000420CE01626FA0580B905E04C4DD402CA1
-:10B9E000228ADF7C5102F26B8551F937D1F87B84D2
-:10B9F000F0EB5710C12FAF47401E1B16D1223F3E20
-:10BA00002229D03B10585F01955F26C7C0D0270F71
-:10BA10008C7FA8B80192FC4B20BB5C0EC2F69660EE
-:10BA2000602806F20D15B09BEB03942F01CA7D85AB
-:10BA3000CA0300CCCCBA8C680300000000000000F0
-:10BA40001F8B08000000000000FFE57D0B78144507
-:10BA5000B670F574F7CC2499994C12F2E03D490088
-:10BA600011030E2144C0709924C0A2460D021A147D
-:10BA7000750292849097887EECAEFE330189A0A86F
-:10BA8000F1B9AC17DD416137B2E8060C1835E0605A
-:10BA900000B32EBAC145C0E72680BC362443F0B9B6
-:10BAA000CB5E6F9D53D533DD9D09C4C7DE7FEFFFAD
-:10BAB0008F9F5FA5BAAAEB71DEE7D4E942328F27E8
-:10BAC000640A21DFC18F969F8B8490F850596F20B4
-:10BAD0002E924188D766F46D4CA6CF88237AE6680B
-:10BAE0005A981DD1375843EFE9CBD59EA434691835
-:10BAF000210F791C5812E223844EB55A2005F51601
-:10BB0000A83B93E07D3A3E21FDE8F80F46E2F8308D
-:10BB10002D99181A671031E07B53ADF989B01E4298
-:10BB20006A47E6C3FC163B21FD7B9F9F8E88EBA7EF
-:10BB3000EF0DC1F724FA9EB5EFEF2965570EFD13FF
-:10BB4000F6DF6DF66D1408F1EFFCC77158EF9986BA
-:10BB5000390E135D6F76B7D93F05EABE6C9F89B683
-:10BB6000E76EFBC026D1FEE5DB4409DA0D3B23F08E
-:10BB7000FDCE75820FEA95A6D647AEA4F5C03691E4
-:10BB80003C0FD3F82D069240C87133613F8715EB07
-:10BB90004511AC5ABE7ED76D305F49A38944D0F7BA
-:10BBA0008F37882EA82FD928F8089DAFFCB5078CB1
-:10BBB00003E878C53EA13EC241EB1B1F333AE83E85
-:10BBC00097EFFCD8D646E17CDA63260E23EEA3A4D9
-:10BBD0003E8D9052DF96E903E8FBA59B052780BECA
-:10BBE00074DDD94E585F69833C5CA4E32DAE8B2293
-:10BBF0008E916CEEEF08CCD77C14E7DB260F83F92F
-:10BC00004ACEDF650424E56E93912ECAE93A60DFDF
-:10BC1000CABCA73D6B713E059EE52FD2F968BF8A6D
-:10BC20009705276CB1C240DCB08ECED7220A5EB039
-:10BC3000C0FEAA8D23ACEA7D146E877D94FAD61BD4
-:10BC4000A75B607DEB8D4569A1F116D7FDA7767DD9
-:10BC50006B5313DD69BDE3F3B487827444A85E4A75
-:10BC6000880BE94FF219818E95E7E78518C4F7E252
-:10BC70003A9138CCA1F1153AF07EC0E9748795F17C
-:10BC800001C7DB123BE02C84B76E3BC7A314C8543A
-:10BC90008FAF948F003EE87A6A3D762C1FF72461BF
-:10BCA000F9A4C781707BDA3312CBB51E273E7FC65D
-:10BCB0003301CB751E1796CF796660E9F3E463BF55
-:10BCC000E73D05586EF0B8F1F96F3D2558D679AAD1
-:10BCD000F0F926CF322C377BBCF8FC65CF2A2CEB51
-:10BCE0003DB5586E057CD1B2C1E3C37EDB3D7558CE
-:10BCF000367AEAF1F9EB9E462CD77038DAB248B6BC
-:10BD000044E16073113B453B89CD7365CBB41E9B09
-:10BD1000CFEA09F3BCD9465A4F70D33A85CB80326B
-:10BD20007FB689D60754B1F621F7921C33AD0FF1D7
-:10BD3000B2F69435AE9C085A4FA965ED23D67973B7
-:10BD400022697D848FB58FDAECCF89A2F551F5ACED
-:10BD50007D4C13C9B5D0FA183FABA7EF73E55A690C
-:10BD60003DBD95D5333FF1E6DA683DB38DBD3FA9C2
-:10BD7000C3273A2C3DF1B055762C2014574DDEB92F
-:10BD80002E89CA9BAD46C75DC449C87BDEF92E89A2
-:10BD9000CA8706D985ED6DDEC5AC6E74617BB77759
-:10BDA00029F6DF2EBBB15DAABE0FDBB71BDDD89E27
-:10BDB000505D83ED8DB217DB47563F8AED8D462FE0
-:10BDC000B64FAA5E8BF5D7651FB6E755AFC7FEAF76
-:10BDD0001B7DD8FEF8FD9B5C5369FD05C1BD1DE4CC
-:10BDE000DE0AC15D4252819EEA9340EED570F9F9B8
-:10BDF0001C101D6DAFE96F443EDCFA6EE60BC0BF50
-:10BE0000F8EB07F5A2DF3E988CE3BC89E3C8741C0D
-:10BE1000F1E2E3A4BF3741334EFA7B25CA382D380F
-:10BE20004E44DFC6D9FADE24ED7ADE2B55C6D90F93
-:10BE3000FCB4C2DAB77DA5FF394BBB9E3F9729E31F
-:10BE40007C84EB89E9DB7A1A3ED0C2A7E183207CAF
-:10BE50008EE238F17D5B4FC6412D7C320E06E1D378
-:10BE600081E3F4EFDB380D07B5F069381884CF971C
-:10BE7000089FC17DDB57C6212D7C320E05E1F35FA3
-:10BE8000B89EE4BE8DB3FD532D7CB67F1A848F49D6
-:10BE900080F50CEFDBBE323FD3C227F3B3207CEC3E
-:10BEA00038CEA57D1B67FB675AF86CFF2C089FFEF8
-:10BEB00038CEE8BEED2BF3AF5AF864FE35089F1478
-:10BEC00001E033B66FEB69FC5C0B9FC6CF83F0B922
-:10BED0000CC719DFB7F54C38AE85CF84E341F86461
-:10BEE000E0BE26F66D9CC6E35AF8341E0FC26732D8
-:10BEF0008E33B96FFB9A70420B9F092782F0998E9F
-:10BF0000E364BBEB985146C7B1F63ECEEB67B4F0A5
-:10BF100079FD4C103ED7E338D3E838A9171F675294
-:10BF2000A7163E933A83F029C071AEEADB38AF77AB
-:10BF30006AE1F37A67103E8538CEB57DDBD7A42E53
-:10BF40002D7C267531F88C3B50956BA3ED54173A38
-:10BF500045FACA951D2E9740EBA29DD545BB93800F
-:10BF60005D222AF606697589F47DCBE698F4078987
-:10BF7000DAEEC8B913E8C74AAD31B5DD113D21523B
-:10BF800063E7C4B86235F5B8190334FDE3F35334FD
-:10BF9000ED8905A334EDFDDDE99AFAC092499AFED8
-:10BFA00083AB7234F5A1CBAED6F44FF6DEA0A9A7D1
-:10BFB000AEBA59D37F78ED7C4DFB256B4B35ED97B1
-:10BFC000FA9668EA97D5FD42D37F74FD724DFBE582
-:10BFD0008D0F6ADAC7FA1FD7D4C7B53CA3E93FBEB5
-:10BFE000F5794DFB15873769DA27B66DD5D4AF3CA7
-:10BFF000F9BACECEB3D88F5FC6EB22D03D61767F43
-:10C000007FE6F7F8AD46AC1B0758D08EDF652D7282
-:10C010001CA3F835BEB5C0D18FE217700A7E45F675
-:10C0200080924BDAE8F37B26B92FB1D3E7F718DD1E
-:10C0300097DBC3D8A7941E049204A5C300A5BEFD38
-:10C040000199D163CEC0F323DAE9FB9586C0881845
-:10C050005ACF12B31B817E770ACC2F8A144915F46C
-:10C060008B3411F40B1E48CE7CC1ABA2D75583296B
-:10C070001F0AA17157C9EE24B033DEAA6EF7821DE4
-:10C08000523398EE6B0021CD42BBDF4BFDB4070667
-:10C090001725B9E9782623B5D3D5F31BE9FC693810
-:10C0A0007F0BD0EB7B307F7CCFF94D291334F39B92
-:10C0B000879468E6371BE9FC7642DEAF3EC5E7A70A
-:10C0C000489844C85F845338BF694809CEFF8091BF
-:10C0D000FA2BEAF92383F31F86FD7FD6DBFE532676
-:10C0E00069F73FA454BB7F23DBFF91EAB37CFE4892
-:10C0F000DCFF51E12CDBFF9052B67F131B3738BFBA
-:10C100002D08FF93307F672FF39B52B3B4FB1F5A68
-:10C11000A6DDBF89CDDF5DFD2D9FDF82F39F13BEBE
-:10C1200065FB1F5A86F31B4D6E27D08F7160649597
-:10C130008FCE4F1D6107490472A1F340393216FDBD
-:10C14000E49784145CC73D918CDEBE8AA4F486F229
-:10C15000C6CBFC581F956C99D4EFE2B4BE7873B689
-:10C1600011E412B6537F65215FEA1D8D22D2377923
-:10C17000D2E41B4ED7DBD9287AA17EC793937D20CA
-:10C18000FF2A4DE4F67C784F227E78FEF953A39F78
-:10C1900057EF4B5F2EAC958FB7A9F82DE847E59088
-:10C1A00091551698D7AEA91FA17E10A1FEC527D420
-:10C1B000CF2094248FCA6CBECFA8BF04F536EA2FD7
-:10C1C000413B21D5B85FE2757D308CAE3F9F283F63
-:10C1D00017EEF32664293A9EC4F8F7C81AC107F887
-:10C1E000B87D5914057E683D85DE384D9DEE0FFB08
-:10C1F00007AE127CCF0B38861BE033938F4760BDB0
-:10C20000B45E6067EF1CA2E8EF4F51B060D5408A82
-:10C210008BD038B3884B4EA4EFCF595A2843E8A2AD
-:10C220005510062F01FA5920539711E0E78D276921
-:10C230009C38E87A6FB6B3F167BAE4636DAAF51477
-:10C24000C866573E5D4F41A188EB9F3543DBFED169
-:10C25000CE2897610C2D573D81F3CCC9D7B6DF545A
-:10C26000A0ADCF756BEB54EFC9A0F76E29D13FA7F6
-:10C2700060A1FB9C17842B5D285DE7AD1C0EB756B3
-:10C28000C95E0D5EC16D55DA21A0E026B82F7C5F36
-:10C29000ECD9FFF665DA7AA1575B5FB04A373EA763
-:10C2A0009BE31CFF47803E687902E883C2F318A72E
-:10C2B0008F905CD5D2C78DC16D30FA50F6715C623B
-:10C2C0002838BE8ED1C7C2DAA8F0F45018A4079758
-:10C2D0009ABE147AB88DD3C3A79C1E8AD76AE96A1E
-:10C2E0002EF1AD4CA2EFDFB26617E2E9A050C8E82C
-:10C2F000E1970A3DB469E8C1CDE9418FBFDB383D24
-:10C30000DCF673460F7A7CB6717A685B7B4E262921
-:10C310003DF14AF1A0A9533CE8F06E37023D507C54
-:10C3200084A587F9C17DD38DD3FA02DED6035F9C45
-:10C330001EB03D05C04E104EF87E6ACFFE544E68CA
-:10C34000EAC56BC3E3BFB2313BEE986A5DE5F557D2
-:10C35000C51D53F55B5C3753535FE49BABE95FBC92
-:10C36000B650D3BEB07691A67DC1AA3B35F542EF5B
-:10C37000CF35FD6F5F56AD69BFB56AB5A6FD969224
-:10C38000C734F5B9EE5F6BFADF54B05ED33E27FFDA
-:10C39000454DFBAC195B34F599AED734FD0D3B2F01
-:10C3A000BD1EE831EBA048C0FE38E67120DD1FF766
-:10C3B0008CC4F2A4C7897C71DA3301CB7D8DCD4F5B
-:10C3C0005C49BB7C192888264C7F16911842F62CB4
-:10C3D0007757AFCA027D4E50EFFE717951B5771095
-:10C3E00095530607C2396FAD91F8C711228052E20A
-:10C3F000F307C4507B561B6D8FEBBD3D6FAD14B67C
-:10C400003DAB4D0A3B6EE5E38543ED61E233217EB2
-:10C410002603C13EEAE2F6B9BEBD4C20F9EAE78444
-:10C420002C47FE8F3130FD5C666472A26C6BFF1C82
-:10C430006283BA7F44D585E6ABA7CC9508F491AA70
-:10C44000E1E3E2B59769E43C81E86D3CD0D938CDB1
-:10C45000F3C575576ADEEBD825E2BA2B4086507DCE
-:10C460003D8CE4070CA097FDCD43668D8675BACE52
-:10C470001A405E35C6A3FDD8E19911774C023CE61F
-:10C480006379D25380E5718F1BCB639E122C8F781A
-:10C49000AAB06CF32CC3F2338F17CB4F3CABB0FC7C
-:10C4A000C8538BE561CF5A2C0F7A7C581EF0D461AB
-:10C4B000F9BEA71ECB564F23969D1E17960ABF297D
-:10C4C000F0D0D3DD49AEA74F03FD5D80CEE2C407B7
-:10C4D000AA570D0AD159E28A87ABBD59A171F3D68B
-:10C4E0009A389D2468E86108F864E3815E4C9C5E9C
-:10C4F000C2B7E7AD952FD89ED526871DBFF2F97F2D
-:10C500000DBDCDF991F416A2A7813A7A4ABD183D26
-:10C510004D12C787E8698EC1CEF41FA7A787601F99
-:10C5200061FC8F6230EAC6ABEC3A57148B67F37349
-:10C53000076AD1B278369F7B051DAE15ED3FDF4807
-:10C54000C073F7C8BF8F80787DF761AA28937BDF1F
-:10C550009F9E5E7A87BB0BFDA0221F55A2E37AB691
-:10C56000474432B84618C80C924EC8EAE1BF75CEAF
-:10C570004FC3BA4462E17D9F736698F32802674F08
-:10C58000891787EB0AEB576360BCE3CFFC2313CA20
-:10C59000398614E6DF348B68DF13FF0B4E806F5053
-:10C5A0001F999C4910070F0C37DAD13EF059B4F0AF
-:10C5B000F3D27A66087EAB298C5A51DFD72621FC4C
-:10C5C000867D35A27F1FE07731397F3178CEF70D38
-:10C5D000F897C0F362F2F1627291B81C2F37D2FD66
-:10C5E00077ED1C9DFEA003E4E085E1AD9C5FE9D7FB
-:10C5F000F3BC287D2F3AEE4A50E8B87508A1F388BD
-:10C60000A21DC7EF6EB884C92FC5EEDB66F2F50533
-:10C61000AF6792B5E33DC5F94F19AFBBE5051BF810
-:10C620005B4B920CF66361F0A094E5F5C9768BDA6A
-:10C63000FE6CD4D6BB6B8519F568273AA2678F06C6
-:10C640003D61B71F1B06723B094B659C254946FBA4
-:10C65000312AF74ED7A546333FCFC7E4C1E6189439
-:10C6600017A73D66ECFF53AFA7B77194F510D24002
-:10C670008E9A411ED3B6D4DEFBF74ACFD217463C82
-:10C68000F76D92BF02FBD04CFFFF0EFC0D22615DE7
-:10C6900019B7B25EF49A2E87E79B35F3D1F71CCA1F
-:10C6A00019EB772917E21B891C57E896EA8B635C24
-:10C6B0009F2CAE8BB06BEDCF184DBDB2B1BF5D639B
-:10C6C0008FC21F54FE922A4102FA29E3E4D325596E
-:10C6D0005609747D6F429010E85660FDCACD6D46D4
-:10C6E000B703CE9519DE7A5B1FC5DF4C89927C8932
-:10C6F000B916CF614BEA2F9D0A7AE64CC38A0488AB
-:10C700001B2C16BBEFC90FF3BE2C3179BFC827070E
-:10C71000B4F63DA70F42C7559E635C94588EABEAB2
-:10C720001D06168FD18F9B00E3C65F1C3E159BF73D
-:10C730004F073B410FA78AC6B34637CA45FA5F6623
-:10C74000084E0AFCDE14F313243A7E695D3BC62DC5
-:10C750004ECADE11BFBC80BCECB93F4BD2F128D52C
-:10C76000BEBCA415E6993F814F441C377D4CE5F8CB
-:10C77000A93FC904E410394F7B65624886FB3B063C
-:10C7800062C80CF93BF31B16E701BC4F81BF47E5BC
-:10C79000E61D24DF867820B599E0DF9C218619000C
-:10C7A000A733E47DDB38151E7225238733958294E9
-:10C7B0001E4CC1F1DDFDC1EF3215D4B48A63E0B97E
-:10C7C000A4F83FC2771847720B98B750C09E7B8978
-:10C7D000B91AE897FA511A3F8DFA519A3AF5A334EB
-:10C7E000F522724302E425143D29139F8070D2B4D0
-:10C7F0008F92EC88C762525503F6D1AF79FC6DBEBB
-:10C800009D4803E93ECB5F7D36B390EEE76A89C56C
-:10C81000FD9473F545B10C0EA5253EA3CBD2737FD5
-:10C82000471BC6DD48253F8CC7CECF6F36621E053D
-:10C83000B44A99DCF449E97DFF890DA22BC206FDBB
-:10C84000E87365BDC9DF7FFFFAFD12F238EEA3B4CD
-:10C850006E2601FAEB9127C0F723D7092E5F187EC9
-:10C860002AE474AFE8A73B017EE343F1ACFB74F527
-:10C87000D51CBE4AFD295DFB0F962FFD8846BEBC28
-:10C8800029BAEF93C6337902F017A400F2D70F1E2E
-:10C890003FA9C7F8AB811F7FB2F10769F99E8EFFF0
-:10C8A000D44FBAFE613DD6BF3EDCFACB5F7D69BB9B
-:10C8B00097EA97D23F3C652394DF4E49B5094E8AEB
-:10C8C000F7B28D2B6D2E903B92D7067C71CA27CE86
-:10C8D00008470F87B87CA506884580782BFC49C798
-:10C8E0003FBDE9A1EBC09EF86AA36CC7386A9DC939
-:10C8F0006FA2F45CD1B0288F8CC17A3BAB3F70162D
-:10C90000E8BFB2513EA2A6D3D2DF3D95007935945F
-:10C9100052061A92A0F4A37F52B1E1F3E9606F547A
-:10C920009200F2ABFE3D98FF9B58D48785C6E89EE7
-:10C93000ED18984980F7D9AFB2E1A1B3A20DFE6A14
-:10C94000C33890BE7F09F7375A246B3F3C27B98222
-:10C950005C01F2548107F1317F63C58BBF1AD34E5E
-:10C96000D7D3B1E14F36410527C54FEAAE5FF09B03
-:10C97000D71DBDCBEF4ECA876ABB56D14F8E46EE50
-:10C980002735B1B24CF6DBAEA4F2A46CBDECF4D208
-:10C99000C7652FBDF0DB67207EFDA1C9399C8EBF26
-:10C9A000F8A53D0727D1FAE22D72BF3CB60D8B905A
-:10C9B00010C24B25FD7F597A080FA5AFEC313A46DE
-:10C9C000B3E7F7C686F0B178CB2E2319DD131EB975
-:10C9D000F5BB8C6D963078A96F9F0E76DF8A17BFF6
-:10C9E0003682BC3BB5532089C961E0B97E0FDA8538
-:10C9F0000027C423C753106FBAFE95142FA05F14ED
-:10CA00003CE9DB37717902E339D2909E5F7E9DCE9F
-:10CA10005FF291C909FB2F79F92E1BECE38454C511
-:10CA2000E8FAD9950920DF4A646F821D4BF6BCE411
-:10CA3000B9BB91DE8AF7DF9DC0E292AEFE06D495C7
-:10CA4000DEFEB0BF85EBE6E0FE8A881BE9AEE45966
-:10CA500031DF47CB2F2532634B18BEB8566672F2D2
-:10CA6000C4F35423D0FD9D50F4C0FB22D70377625A
-:10CA7000DCF36EBE176A3162FD4B33C3D330D9C0CD
-:10CA8000E52CD32B417ADDF000EA8BD3835D8970EE
-:10CA9000BE5619D20FA837C4FDD312197E989EC175
-:10CAA000F7A89EC985E7D0BF5576458CD1BC877A5B
-:10CAB00045997F299F9FAE3B12ECB51309E1FD8F8D
-:10CAC0009FCB0ADF53BB42455F2AFE66FCBE613541
-:10CAD000E36F85DF7D336740FB170718FFC07BA03E
-:10CAE00067E9BAFC89D8BE6BB680F2C044FCE1F8B5
-:10CAF0007A83CCF95ADBAED0095DB72444ABE805A4
-:10CB0000C68F45F8A35E2F7A92BEA7929795309F65
-:10CB1000ADE7780ADF1673FE9F216BF99FAC8BEFB0
-:10CB2000533E6599ECFBED33C0AF943FBD0EE0572B
-:10CB3000391FF6FDB7CDCD076FA67CFAB77A854FC2
-:10CB4000B5F253CFA7255BEF26409F7A3EFDDBA0D1
-:10CB50002A12964FE9F3B07C3AA8ED7F547E2AF072
-:10CB6000AB02F84585E0A7C8C3DEE0A8978756D991
-:10CB700011561ED2DF0192D993FE14BA53E8ADF4D8
-:10CB8000F7E54341EE04E952A1BB205D2A74A7DF1B
-:10CB9000AF167EFAF64932C175E5BF26A3FF5CD613
-:10CBA000C4F242E97B7B0766209C5CA8C648EDDEA8
-:10CBB00081FDD4759FAE5EAFEBEFD2D5F375FDDD91
-:10CBC000BA7A95A67F5963B39120FEFD9A7EE2B2B0
-:10CBD00067C8D1B870F4EA637E59C359A317E8C295
-:10CBE00012C0F7E5E5C40B7986811D22C605BA2877
-:10CBF0008C6B207EB139D9E7A5726365048B3F74D5
-:10CC0000D903B6585AAE8C61F540BCB106E49EF229
-:10CC10003C10C1E28A5DF9015B8CCA9F6A6F1251B8
-:10CC20006EB7F9C88C707E16D528C8476DA4B77644
-:10CC300076EE354DB40C590671A55AD10936F81D5A
-:10CC4000D537D9E0DCA9AB29F5FA02FA7CE11F451A
-:10CC50004C7BE98AB48D817511AF4BEAAFF26F4E10
-:10CC600012EFD359747F0B9A989F73C71A9D3D4258
-:10CC7000D6203D1559961A419E527FE288F6BC8611
-:10CC8000F145291FAF649DB65D799FD201FAF3A5E6
-:10CC90001BB4ED6EEE0F7FA0F0C9583296FBA32CAB
-:10CCA0000EC3E5F23431EDFA028A8FAE1691986820
-:10CCB000BDBB49447C746F167C104F23DE78E4B70B
-:10CCC0000A124079A8C0A903F8C9D8BBBCEAD8F6B3
-:10CCD00069E62F816EB67F3CE63F69D9B1FDC3118D
-:10CCE0006F40FDD543433E263DFBE7EE8CC073FF0E
-:10CCF000AE9D56A4F7AE1DEF0EF925D45F33396112
-:10CD00009D5D3BBF1E03F4D3B5DC5402F2AE6B3025
-:10CD10008BC7AED8F1F59836D4AFF733FD6164FE1A
-:10CD20006177D33F3E13FA4149770576C3CE28E4B5
-:10CD3000A7CAD72330DFBB6BC7D7996ECB4FB79F3E
-:10CD40000A9EE7D16525055B617D312C8FA1F28DAF
-:10CD5000892F54D3F9CB1B761917D0F6DC37FF395E
-:10CD600006E468D756660F75CA6DCF411E4394F12D
-:10CD7000DC7299E2AB13988A3ACDBF3366E402DFE6
-:10CD8000F484CB3F313ED65778A4FCAF8187E06274
-:10CD9000F2CEEA330BB0EF6F3FFB18E39A26A44BB9
-:10CDA00065BF7FABAF467BE562FBCEFE7F6EDF8269
-:10CDB000BF2FFB76FF9BEFFB38D7BB7A3EE849E7F6
-:10CDC0003BEEC1FA4B5627AEB78FF4EE85FDC7FF99
-:10CDD000FBEEFF7BE37D2BC5BBEDE2FBFECDFF5AF7
-:10CDE000BCFFF1368E773B7ED7F3E63F717DDF5790
-:10CDF000CEBDF96F8EF7DEF6AFD8F5AD862A7B068D
-:10CE00005D5F01A9B582613137BEDB92E1806CD7ED
-:10CE100073FD308F0ECE4BC3F84D0123F30B4D90B5
-:10CE200047077EFB1C41890BA21F751DB71FAE1B58
-:10CE3000548276C875AE8799DD2055B566D3FEADB0
-:10CE4000390B9C987349D20FBBA13E7B32AF6BFD6F
-:10CE5000C9F704E212A81D7F5DCE352D60D75EEFC5
-:10CE600012D1EEA525DABB1F0C99CE9E4FD0FA3D0C
-:10CE700073DDDAFA4D05DAFA1C3EDE8D84ADFFC6AD
-:10CE80007CC107715553F613F11067352D948990C5
-:10CE90000CF942552BC1BF9893AF7D7F1FF8C1E3BA
-:10CEA0007F3C1C534D0A1C97205C48B6E8DC48FACE
-:10CEB0000047BEEED6D9637D90CF4C242783E38D07
-:10CEC000E54E8C83737F5BE6EFCB9655ADC0CFB25A
-:10CED000CECF56FCE5DEE04DB8FF8DE3A484E02F15
-:10CEE000BB44F4BF659DFFADE0E5FBE243C1E38FCA
-:10CEF000C5CB973ABC0CB2B808F0ABCCFD85A916EF
-:10CF000027AB0FCA2778DEC8FD05A99F8B78D342CF
-:10CF100079DF8BCCE66C385F338F1430DE71FD1A0D
-:10CF200011F583394DC075E54F90318FF873437E0D
-:10CF300026E03B6FDC1515BF60CB70023C1771B863
-:10CF400017912AB45FC9F9EFBECBCA84730682F683
-:10CF5000EF221721D752BFAD284BF0475278154B1F
-:10CF6000C41B9D0E716F811CD1C4BDB575F8FD4702
-:10CF700042689C8BF5EF4DBEFCD4E55FA93C3B328B
-:10CF80008CFA411E9EBB4958DC56F1AF6F6F627040
-:10CF9000AC2C137C2948777E395F75EEF81CE7834B
-:10CFA000BFDE3B0EE564F6A3A3A3D1EF7739D06FC4
-:10CFB000A8E47E43B7D7110D71AEEEA6547E3E9B1A
-:10CFC0006B53CB55A5DCCFFDEEBF407E212DBBA61C
-:10CFD0000AB522F8712480F15CEFD408B2314CFE1E
-:10CFE000EBFF311938FD54611C007E6226E091FD93
-:10CFF0008AE9ABD1B12ABCADB9F69434A6271EE0BC
-:10D000007744750EF963E10B7E3EC0757F44DBF417
-:10D01000FC30FBAD35B13856DE5BDFE2779C373450
-:10D0200025CB00971BA68A9A73FB5526EE978D2376
-:10D03000E3605D796F5D659B087869119DF0DD6641
-:10D0400065D359A33BCC79B01E9E303EC4D58FCA60
-:10D05000CE2280E7D1872308F8D1EFF273C634F8E7
-:10D060006E220D433A2E882BFE9AC3B5D364C77245
-:10D07000565EB61C4FE74D6BB08F85A3D401BC7FC5
-:10D08000271821E3218987BDA7F41B50C6FAB51BD9
-:10D09000ED15E1F63F3C82EDBF9838EF9920FCFB9F
-:10D0A000E12DFB51AB3F07EC83A93CAED283AE0927
-:10D0B000F247F70CC107FA1BFC61ACE7B1EF84DF64
-:10D0C00055BEB3BE81E95985EEF570DECBE1ACCC3F
-:10D0D0007FDCC4E2AF7FE2FCA5C05981AF7EBD4AD0
-:10D0E0007F2AAFA6A8E351D7378E7D19EC9B8A26FD
-:10D0F000C16EA04355486D46E0C3CAC6C764386FC9
-:10D1000099EB60E312297F8C3A9FA0D3C4F23B9A3B
-:10D11000D3AFBC0DE8E4DC1A13E842E2BAE3AC0D8D
-:10D12000E4F0BB06E79FE17B6AEF7B22D9780179C7
-:10D13000F5B1A7CE3555528F9B8CEB9C55962D4360
-:10D14000F8EC96B25D72A28A9E3A4DB1D8AE3C1F01
-:10D1500050E64887E7743E5C87F7111381EF42D2AF
-:10D16000EA5BF1FBD45BAA62181D96D4EF32623DF4
-:10D1700019FB2BF329F3E8F969769E36EF78416EB7
-:10D18000DB20804B9EC9BFD419864E1F332BE78E00
-:10D19000DF534FB828DD8EF9FF484F2C55F4441B60
-:10D1A000E6B92BEFCF35333E57E989C4707A62492F
-:10D1B000B52311F0B064476A2230C9923F4E4B0844
-:10D1C000A7273EF0B073E343FCBBEEAED9544F5CEF
-:10D1D000AED213B323904EF4EFE59A95738D8BE89E
-:10D1E00009056FFFC3F2E603D01361F8FB46B3569F
-:10D1F0004FDCD854887AE2C6D9A2E6FBAA6BCD17D9
-:10D20000D313D90973B12E3BA3C2D0CF07DCBF39EA
-:10D21000C4F3FB611ED0176BCC76849B5E6FF42643
-:10D22000D7C7F655AEFF5F82B322D797CC61F743DD
-:10D23000F4A44382F4BC642E95EB02D02393EB4B11
-:10D240006EE5714E9D9CCD07399BA196B3ECFD0A0E
-:10D2500037D30B958DC9BF9A47DB6FAE959D66DAC4
-:10D26000FFE690DCCD54CBDD356609E1DC43EE967C
-:10D2700030B97BAE691CDA4FBDEDEF532E6FA93C80
-:10D280001BE60C431F05F3A234DFDF1D1DFB76DA1E
-:10D290002BC02FEF8A787EFB39B703F68D7D3B03D9
-:10D2A000ECE9537C3DDBB8FCEBF4F85C53A91CC8FB
-:10D2B000BD83D9D3E59B45845F4503E3FF8A619134
-:10D2C0003E07AD4F4FFF16CF6117EF60E7B0740711
-:10D2D00079D92AFC2F7EB7AD06CE0516AF17F01C04
-:10D2E00019BE5F0078167378163917E3394AF1DAF8
-:10D2F000F0E73FE5BCDFA2A6F5180F5FE4D3F62BFD
-:10D300001F76F529F047F24C0C0F79AF08BEF5C92E
-:10D3100090CFA0EBE75C8DE747E5F5DAE707F97E0C
-:10D32000178AFEB457E8FBE4CFCCBFD3C3FBA01EE3
-:10D330002E253F122EFB295C32FEF570E90D0ED42E
-:10D34000BEC7F3013D3C0E2B72259D64001F7E6E0F
-:10D3500070A15CF1BE43E142E7BBE3B1E19AFB405F
-:10D360008E73B8BC6B70D7F4877E1502F62B5EB750
-:10D37000654F02ADCFAB2763E178A178AD560F07BB
-:10D38000F57E8303F5FABCAA2D02E4C72EE4DFFB89
-:10D3900095F81EC37B546E5D46F53CEDBF20DDE481
-:10D3A0008673F0FD1101949B0ADDC64730FB258E84
-:10D3B000CBA1A3030253513F350A76E4477F04D340
-:10D3C00057144F70BF4BF3C4AFA773BCB0B8522310
-:10D3D000C36325C51BF0F3F4265EAF6376E02D4AE8
-:10D3E000BD5EF0390490ABBB64765F8C40E2048E86
-:10D3F00004957E84F3D5EC04159E77B433FADF28C8
-:10D4000038F1818FFEF743F0DC2BDD333BA6AFF420
-:10D41000AEC0293E428BE7FD11AD79E3FAC1F99B1D
-:10D42000E0C47B739A62F09CE8582DBBFF2595BF42
-:10D43000A7E70BF03BD4F7D1CC8485437EF38C086F
-:10D44000CC0FC57953985DA6964FFA7B80BE6FFED0
-:10D45000512569457B2C94C7E87EDE04E3CD10346A
-:10D46000F94E1009033AFF09C6BFD57C81F14992F4
-:10D470001DF396EFB22BCFEDECBB2C5E6F1E9C79AB
-:10D48000681E85EFB955A2135CA89B0C8E835920AA
-:10D490006F1E9409F0CBB97DB28BE98128D43B850E
-:10D4A000EF1EC5EFD90A590E1A29BC8FE997A37C44
-:10D4B0003D1F51BDED82580AA91F0FF7E0CC76EE53
-:10D4C0009AE680784BC6FE9570CE392BD77EF02039
-:10D4D000E07335BB07E9C8AA5CF4D3EEBA53407ECB
-:10D4E0003B4CF106EFCF999D7CF0209DF7D655F18E
-:10D4F000786E39CF157F239C63CEDB273A1DB4DFCE
-:10D5000082EBAD1638C7BC66A448DC2AF8DC4A5A60
-:10D5100031BE33AFEACE39B0EE12AA0FC56428F798
-:10D520004F4B84FA3A01DFAFF4BA8DF0BD66EBDA07
-:10D53000B3C60C3A7F11ED0760AF5CC7FA556E10A9
-:10D540009C90FA5DD4F418CACBA20D025E34D34A83
-:10D55000ED5F331BD767A6E3B6AEA3EFD37A31BC3A
-:10D560000FE36E88B911CE272BE93AF1FD09D57882
-:10D570002E5D44DFA3CDA475C39D38DEA275028164
-:10D58000EF034B26243F3201C6DB273BA1FDD0AE83
-:10D590005F1B61DDB7D1F9FAD3F117886DD3A03FD6
-:10D5A000F9A560C7FB87EA4660DCAD0B360C2F544B
-:10D5B0000DC73AE6133B100C923A1F654704FB4E29
-:10D5C000B86859750DECABCD1B9F6C40BA3A6B0433
-:10D5D0003D7E8CC2DB4D873C6A64792ECDDEA3C6CE
-:10D5E00036951CFD282215DFBFA3311BF3261692AA
-:10D5F0007CCC9B7057337BA47D65840FE26AEDB2CF
-:10D600007D083C6F5E69C2E79D2F31FDD339B80DAF
-:10D61000E3DB27D6C904BE5F5CB12EF569C0E389A0
-:10D62000CD32D29BF82CCB1B287E89C5C99AD7B1A5
-:10D63000714F2C35B27BB5A09DD68B5F54F20AB4E6
-:10D6400072ACC8518A724A2F97F4726BD193D54647
-:10D6500020D91EF26AE9749457A554EF00A1F59001
-:10D6600057836A306EAA975795C4A2C8A974885F79
-:10D6700016960FBE6D2DD0F1ADEC838156FF6B5F1A
-:10D680003E057AB7CC4AE04985647F5A6074418090
-:10D690005FE6356DF912F8A0645E04DEC7751CF014
-:10D6A000007CB3260ECFAF8B7C85086F252FB77813
-:10D6B000AD96CE95F8E35CB7485C6AFD5512455CC3
-:10D6C000AA7E87EEA3F44AE7B9BD51F081A83C7465
-:10D6D0005FFBDEBB33B06EC7752DE3F6C11A2BD2EC
-:10D6E000F3A19F9F5D09F47ADBBD02017B9D78DD8C
-:10D6F00035A00F2BD60A0E880F17DFCBDE2FA6EF33
-:10D70000C3BA0FFD9AD115A56F07D07FC5BAC7F66A
-:10D7100062FF0D8203C63FB4BE10ED8912AF48B060
-:10D720007D433BFA0F544F619E59B3574C00FAAFFB
-:10D73000B8DF64075349A123852EDBF97D08C4ECCB
-:10D740001C338BBEB70A1615DF931EC50221A84FE6
-:10D75000814E2ABD8CCEDA5F929D403617A74BF6DC
-:10D760001DFC09AE5FC567E74C87EF748AA97E048C
-:10D770003A6D5E976B043BE2844FC0FC8A9E74490D
-:10D780002C6A3B4AA1CB670526AF7BD0A38E0E7BCC
-:10D79000D01DA74B85FE2851A35F59B64F26F0FD3B
-:10D7A000BD9E1EDD72FD8D90FF51F832DD0F5D6F65
-:10D7B0006ECDCFD15E57E048EB09502F9258DE8FE7
-:10D7C000C20FE512CB0FFBDEEBD3CDBF2982E7877B
-:10D7D000013F882C7FC94FE77D7BF30B982F79663B
-:10D7E00053FB7568DFBC41E900E0BFD94AFCE87F24
-:10D7F000F8500E953688986F4D247FE62C95DFAE55
-:10D80000E4BF2CFE8315E15DBAD5E4CBA3EF976EA0
-:10D810003F3A06F311960730BFC7BB4960E71FDEEA
-:10D82000B631F0FD50A9C4F270F476C1F04816E7A5
-:10D83000EA782DAA00EC36A18EDDB3575A7F936C9F
-:10D8400052C5750745CA382FED87E7635E8A67B80A
-:10D850001F01D6A7BEDF4DC9BFE97891D15F69A38B
-:10D860008CF65C69DD964EC8C32C3D6C423FB7B266
-:10D87000EEAC11FCD8DC3FBC84F7F355368A9A3CF9
-:10D88000BC1EF96F75A2DF04F95B0DE5787E43EBF2
-:10D89000ED58AF0F9F077AB13CADC57FD8B1DD4BD6
-:10D8A00041B8F895DFD9F0BEBED68D36FCEEA9EEB4
-:10D8B000C2F9A73DF2DDEA575F30DFED34FC4109E4
-:10D8C000EBBA485DBE601D936B747D99F961E2C44B
-:10D8D000417BEBA52F9F837CEC8EAD7F7B0ED65BCF
-:10D8E000F65FE79E83BC1AB233C20EF648E5A60F78
-:10D8F000309F5579AF2492D97F9D2FFE0EF3803B48
-:10D900003F343961B4CE1D278680BDD1B9E5DB0433
-:10D91000C8EF5DBA631AC673966ECB4D2461E205FB
-:10D920004A0974EBEB431EB21E5FCD0DCD98FF7319
-:10D9300086E21BE443307FB1BE9CE5833A78DEE2A9
-:10D94000E6F0F9DE3DF2141B665D3F19E46203B3B5
-:10D950000B2E9AAF7880E2F1F23EE06FF36A2E4F21
-:10D96000C2E3EF0CFC41F15413A9CD57FCB261E1C5
-:10D970006F9E81B686B85EF315FD7D809B924F3E0B
-:10D980002BD2F55824F0CDD6DF637E28E02DCF01D1
-:10D99000F2F9CB2110173E290730FE10D861C2EFF3
-:10D9A0002C4B771C42FEE9DCB61FF3B509CFEBEE3A
-:10D9B00024C11FCBC3E5B19ECA0D5696E7C8E10F3F
-:10D9C00079900E1B3EE7F98E8C8E953CC8DEF21FD7
-:10D9D0005B2253F87D2A2C4FB37CC3C73CAF308405
-:10D9E0002F6102E0A9FD8279A50A1CEC00872BD4E7
-:10D9F000F9BCE1F34C8379DF1C5F803F90D3C17C9D
-:10DA00005D5A1F04F99B3EE11009230F3AD7B33C3E
-:10DA1000E04E39FCF7CC4A7E6FB39E4F7D7DCBEB59
-:10DA2000BDD8FABF2F7C1A221D38AE1E4E1DE7C38B
-:10DA3000CBF1E39CEF7FF0F7216582FEFB93CF8172
-:10DA40001ECB1BDA8D789F89E23FF1FD76F0785A84
-:10DA5000C72611F33E6BEA9B518EEBE545053F2748
-:10DA6000D1AFF71BBEDE8A46A6273AB65A7D163AD4
-:10DA70004EC75BAF213D576C6EC7BCD3BD75AF18A9
-:10DA8000DB54E7CBA0277CAAF577BCBC6B0CCA6D36
-:10DA90007EBF987E1E63149BA7B229FC3C959BCF4A
-:10DAA0006AE659ECAD37DA2D179FEFB4E4BA09C630
-:10DAB0003BDDCAECA5D3F5E20C5F98F94F71BD4987
-:10DAC000482D3B0FA5FA12EF59B3B27BD5445B2426
-:10DAD000DA5F4BAD130E47F783D288792F2BAA79E3
-:10DAE0009ECC7DCE24C0F70AEBD504D6BB12E0ABAA
-:10DAF000F2E365BB9B80DD2627E567A8CF5994F547
-:10DB00001BFB19884F85FFA5D61989E07F12C93BF9
-:10DB100008D6715DCAD712E8BF560F8BDF93F34763
-:10DB200087C1F356C9BE278E8EDB3A557042E8B5E1
-:10DB300027DDFB347186992EED7DB1F80D1CDD5F7C
-:10DB4000B7D380F6A0D5E0B7D32EC41AD19A840EED
-:10DB5000AC8338A404FC1402F3211EF49867C1FDC1
-:10DB6000C83642CD53E8E79434F79F444F9074F79A
-:10DB7000A19003C328BD5A38BD2A71392BFB9B8E57
-:10DB8000DB86F7ACC4A4916A20DF355637DA0D4F37
-:10DB9000F0FB69E86F24E441C49248A7FAFE263AF4
-:10DBA000AFE6FB383AAFA61EE3D2D6E36648C7C25B
-:10DBB000E99738BE8EE9A205E11033CDA0F86B7964
-:10DBC000C31342EB8E89274E3FB45F6BC1EF012830
-:10DBD0007B79D5FBB058B4EBA6EBD3C889E8B43653
-:10DBE000AF81AD53F3DC4E1C02EEDFA57D4ED7AB0B
-:10DBF000A917467179271109E49DC5DC4A38FCBB99
-:10DC000035F0BE5FDA373801F043B85FED2590CFCD
-:10DC100012CDF741E7D7F4B7437480CDAF1D870C21
-:10DC2000B2ABBF43BD9CEBBF5196FC2551949E32D5
-:10DC30008756616276561249C3EFA59BFAA17C4ACA
-:10DC40005996837927422DA3AB616B08F2CDB000C2
-:10DC5000CF9BBA3F12ED5193997823D2E17B36E204
-:10DC600095D361161FCF43702C37D0A1A45594D6FD
-:10DC7000E87B4D811CC3428A847A68A2E35746B987
-:10DC8000AAA3289FD6CC742719C6C2F6DE5EB93B7C
-:10DC90000BB9F65288081AAAF7EE69198C2204EF1C
-:10DCA000F120DEBD7B80C66B953A15ECF09D7F6D53
-:10DCB00064B0EE3253795F9BC2EA8F3EB47725DCC5
-:10DCC00037936ECF7F14F649CCF65178DEE58FD5C9
-:10DCD000DCF3DD9B7E51D63972833F17EE05BE3AE9
-:10DCE000C0EEF51D6E0D7E778F7A78A345A9FBD126
-:10DCF0008FC86FD88F72ADBC7E3FB61BA04ECBA134
-:10DD000071FEDC81749F2F471D9A9674291DAFA167
-:10DD100030093ED97F35EAD01EF8EE3004878F57A0
-:10DD2000EE1E148283B4FCC33D2D93D570F8700FA2
-:10DD3000D8217D85C3AB0F7D8870E8EBBE295D6C73
-:10DD400007BC5C936DC0FBD6AE386CC1F80AFD45CC
-:10DD5000A03EE2E3ACEFE5BB6CC51FA1E3EC54D3FE
-:10DD600097F29E4257BDD14D2AB18F62F76C6AE996
-:10DD7000A72BCAF536ACAB25CA758F351EF78FF7C2
-:10DD8000005CE3763BA78E0BD135B1B8C7C1FDEE81
-:10DD9000A32CF35BA354F2F29AEC25620AC4C98166
-:10DDA00017E243FB895FE68D1841F719EF3260DE19
-:10DDB000FC288BFB20CC632B08F82177EC0AE21EB1
-:10DDC000278821BE50E6ABD9C1FCF59A42836F3952
-:10DDD0003BEF1560BC107DB4E9E823C0E8A3B11D9A
-:10DDE000E9A3A2A99DD14763754E64063B37033F63
-:10DDF000BF9604C602DE3BA2BE9A2651FA1F1A1530
-:10DE0000A801BA91BDE7A6E55D8A703D1D163F7C6D
-:10DE10007DCABE7AC36F6D4BCA4369E04FEE33E0F3
-:10DE200079970237A55F8C85E5C5B658DD5F03FCA1
-:10DE30002A27B4ED85ED6F6D791FF3366CFB6ED834
-:10DE400005EFDB66530C3942F3D6EE5B8EF767D7EE
-:10DE500006D87DD8D124E005BDDE3B3C18FF04E1A7
-:10DE600001764F1AC0A31DF96513FF5E2CAB5170EC
-:10DE7000819E1F1AC5EE0D89B4B0F3EB211611D7A0
-:10DE800039C4C2CE59E2F7BD2582BF9575BF01FBEB
-:10DE9000C74399A6DEFFFDBCBFA489AF2BF854E8A9
-:10DEA000894AD228B87FE44C8C3BD1A2A19FD8A844
-:10DEB00014D578CA7B8F7888F30EAA47AFD83DFF78
-:10DEC0002ED0AB947EBE00FC04FB8D9623006E4AE0
-:10DED0007FA0CF70F8A1EF0D87F9601EB017B6ECE8
-:10DEE0005E22E23D1A7DC46B26DC1B49FB6746912E
-:10DEF000AAADF4FDCC685A423D8ED713797D202B14
-:10DF0000533F711A04FA7C3D8FBB4EB6F0FC31C909
-:10DF10003EEA86D15067765C565224EA05856FE169
-:10DF20000E0838B796F8F9754A20C5007853F858A6
-:10DF30000A18FC56AAB452248701F218DEF1D07DEB
-:10DF40004BBDCB9DAB2F65DF71EA9FCFE4EBF9C1F1
-:10DF5000F6F5173DBEEF9E09F02D37B73D7203ADC4
-:10DF6000575C7A0ECF079747555C79A17B2FF4EB6E
-:10DF70007FE7FCDB5140874DDF98C27E0F55C3E140
-:10DF8000D6E229C0F732F9BD2E2451C93356E5B186
-:10DF9000421BB7CB109529F81CEDACFF401108F8D7
-:10DFA000F44AB1F07E54329E1F4ED1E5ADFE879FFC
-:10DFB000C5F932C130002571C92836CF37CC4E3271
-:10DFC000D3FFE09C691A3F177B4772AFB0D2F1DEF6
-:10DFD00021EC7C3533AEAA19EAC4C4C6CF26DAFBDD
-:10DFE0000A32136BA7C6C2B8D1C918DFCA35EBDA3B
-:10DFF00053BD12C869929A8C7989D388CA3E637AD4
-:10E0000003EDEE08BA2E90E3D78C2C744EE5EDE7C5
-:10E01000E8FF434DE4F6992A7FE32AC75CE7548D75
-:10E02000FD528BF701FDE99FE2EDE1F22C3EE3FCAE
-:10E03000DFE2C977C2F9B31E9E390EE17EABA3279A
-:10E04000DCF570D4C35D81AB1E8ED99F38A7C68620
-:10E0500081931E2ED348ED48D0630ADCF57079C752
-:10E06000CCE8E29D3413DEABF88EC4E0F80E352325
-:10E07000A11EA49B6811EF01CE8CE2F53747B0BA20
-:10E0800082EFA864C4B71EAE7A3866C6F1F7E358CB
-:10E09000FFBD002F09E502E247A19BCCD4AADD31E8
-:10E0A0002A7A50ECEB691C2ED4BE46FB3937DE8A47
-:10E0B0007126B0AFA72584E0965BCED6953BDCF207
-:10E0C0003CF8A9F475BCBF720AE13FFF143C2FCAAB
-:10E0D000E45505CE53BED1DAC9D39AA69F8238C380
-:10E0E0005093FB7EA0CF801083E77514EE477470C9
-:10E0F000D7BE67D7D6F570F803FC31B127BC143A08
-:10E10000FBC0C2E34E03C820B097C7BC96110DF206
-:10E110009B34C5868D4B5C71383F380EA757A4637E
-:10E1200081B883CFEDA93F428EEDA35A5225C73661
-:10E130008BEED396F89E724CC1D3648E87C9C4BB54
-:10E140000BE24B9389F445D01F480EEDBF5BD9E736
-:10E15000403210F67983C5C1E43FDF6770DFD4BC7D
-:10E1600084F9B3F8FC59660B7E5F4302524710CE28
-:10E170002978DF91D7181B5A8792BF4F86541166B2
-:10E18000CFCDC37BAE295CC87751A17598AC828492
-:10E19000F7FDF0759CA9337B218FAD5B7447819DA2
-:10E1A000D721EC1B83FB93FC2340FFE9DBCF35EE4B
-:10E1B000AE8076DAAF08FBF1F52F1659FC21B0C31B
-:10E1C000E47B3EB9773B95B235EA09857EB3E0FB47
-:10E1D000D4CB81DEFD0361DD5340D5D172E759F622
-:10E1E0001D437663BA04F3ECE96679FF39C42581EF
-:10E1F0007DABA7DFEF4BA7A178456008F8298A5DC2
-:10E2000036D5EA1E69A5CF57F3EF669BCE8E18056B
-:10E2100078F9C1F474404B4F0A1D51BA1A0FF0EC53
-:10E22000CAF8FC6930C7DFCD3897007A51B1DF43B7
-:10E23000768A6B02ACA7373B7E89D53DC57A013B18
-:10E240005EB1672EE68790DDD441A674741BC7CB00
-:10E250003C73ABCCEECD0F60FEFDEA48E55E3B477C
-:10E2600024D891B7AD4ED95407E786D52CFE7E6BE6
-:10E2700095ACF183DD90DD86EFB3FB666F5FA66D35
-:10E28000FF4C60FE7EA157FB9C581234F7EDF69CC4
-:10E29000D7E035C0BCC323313F413FAF7E7FFA7921
-:10E2A000F5F3ADE67ED56A63ED48A7CA2E596065E1
-:10E2B000F650F7AAC7EBE0CABADEE0E7360F48939C
-:10E2C00054F7ABB5AD8E2C08776F8C329E02EF7988
-:10E2D000C4CFE20055F2DFC3DD839BE566F181DE4A
-:10E2E000E61D16988A76A0E149BF08F6FCB0004109
-:10E2F000FB3B2BE0322CD0F801CC4FEEE107C0BD48
-:10E3000026B45ED6B08BF901F5D5E84F94517F0263
-:10E31000F4CC7A389B1EC0179486FE41D0DF85FC72
-:10E32000A92CB8CF92FBC312A597D45AD67FA3F5D8
-:10E330005DE36A09FC5577924C2963E3C3EFD798F4
-:10E34000A95F55934C2208F5AB5E78F8FDE96BC0E8
-:10E350005F8E7509707F28ADD758FAF7DDBFDEF8FC
-:10E36000F0FE1AB86F94FA65EBAC2A7FB737FE78E7
-:10E37000048C910BF047BA3D7F23F0A112AF688A5D
-:10E38000E07C1F11A4BB6880974227572F9B8F7E8C
-:10E3900045C425E787409E5816C7FF162B8FC346F6
-:10E3A000B1F79F12DD5B90BFDF3A3F02E2CBEF8C0B
-:10E3B0003C8AFE5C9395C5E7F7794AD07E52F0B966
-:10E3C000CB2A703FC93F10F8EDDAF1CD71E09764C8
-:10E3D000C902DE43DA24FB9E4CCF007934DBBE82D7
-:10E3E0006E296BA211BF136B8AF00FBC5B65A7355A
-:10E3F000F1FB4C9BCEEE1DA8CE631E66CDDD6545C0
-:10E40000FAF38B307E56C6EEC3A0EF7BD32F21FDEF
-:10E41000E112407F90F3FB13F0FCA8618F0DE24204
-:10E420001DFC7E82330DCD09F36959BEE52F36F010
-:10E43000D7DEE7703823B5E23D4A65DB44BCFF8395
-:10E44000CE9B700BC4A71B1664B2EFF7D877678A10
-:10E45000FE4CFF67F3C07C1634C4EFC8147B72B265
-:10E46000D9EB83F535558B182F9EACBB376C0ABFA3
-:10E47000374C6F5F9EB42A71E904CC875A6A67F300
-:10E48000F4C64F59DFC4129F8ADFB224BF08EBCF16
-:10E49000FA2681C01597675A529EC8033F9EC8CE80
-:10E4A000E130AC4476A3FDCACF9FE86F37DC43BEB2
-:10E4B0009357DE6C3837EB4A2466FBFD970960778B
-:10E4C000B9FBB1E022D3078A7D37E51B6D7C556F20
-:10E4D000E7E6348DBD7F204178B37FA722C0EE559B
-:10E4E000EB61FF06A687B57B09790CE190BE2DF59F
-:10E4F0001AB84729FD8F063BCCDB027C110FF83C94
-:10E5000087F7FC5410FF8DD05ED120DAFDB07E92EB
-:10E510007119F09562372870693CDF6C1E43D79102
-:10E5200075D6605F4E877833F005FACFE3FEBC2FD7
-:10E530000EF4575340C27382ACB3BBA316A8E46079
-:10E54000D379033E7FF3FC5BDAE781D8CBE0BD2DC6
-:10E5500006E617EFDEFBF728904B6F9EEFC6F182C1
-:10E5600076434FBB18E1916B15837167B55D4CC461
-:10E57000AC0390B7352D9AAA31A177BB37FB137244
-:10E58000BF95F4B41F72C01E11C3D8111CCE743EC7
-:10E5900009F8486F575C6EE3F1E6C1241DEEA36CE9
-:10E5A0003C1FB718BF1F6E8AB22F477DCCECA5AEBB
-:10E5B000DDA71FBF069EEF13D9FD11E745E4A7B7FE
-:10E5C000762E1EDAA6E25B2A39114F5FF53FDBF9A2
-:10E5D00006EDFFD59E481647979C97A9BF7708F58B
-:10E5E000F77178F907B0F338EF00B8D7E907DB2FF8
-:10E5F0001D3DFCFA3C1BDAC381E9A01E46AC6B371B
-:10E6000002FE5BACF9D7D990DFEAA3002E5E92330D
-:10E61000904C80F37A92037415A82676F027B6B54D
-:10E62000180C80978C8DC998A7B3899F572EAAAFD5
-:10E630003526ABE862113FEF3A297B87C4AA9E1FBB
-:10E64000B031F972724FE96F304FE34313191EC6B0
-:10E65000DE6CB0317DFB8AD17BCD66E877C480DF8C
-:10E660000DEDDEFBFA5EB8CF78D161C75888FF3D6B
-:10E67000627360BFC67D9B6A20CFB7F113D052543E
-:10E68000AF6C28140D74DE378883C5EF0E18D01FC9
-:10E690000FC63D892B0EF6F9105FCF1B2D06CDF965
-:10E6A000D81BFCDEDD7B6D32B62FB18988C7AD2D5E
-:10E6B0003971A0375AACEEBB6DA02F8EB5D5C01204
-:10E6C00094789F62AF4D3CB0F59AD1F4CF891D0686
-:10E6D0003BA0DB71E07911F6EB3849488C407AD8E1
-:10E6E0006F743C8F7ABC373AD878741D6F01BF2A9B
-:10E6F000F0A79AFFA1345A7FA3558A85FC2E05FE08
-:10E70000CA3E94F91DF5C4B5DE82ACE4DA7A81B86C
-:10E71000B3925F3ACE4E947F2F01E9D268733D6A7F
-:10E7200063F60EDAD727F730BBE815AE474952E15A
-:10E7300050809F82A77A1B8B332AEBE96DFEDFDBCB
-:10E74000989E54CAEF4BD79B648717E9661BCB0F83
-:10E750007778FDE654C8236B4CC57FCF499567FB9E
-:10E760007BA4E793DA7B051BDB0C06F80EAC628713
-:10E770001083E66D1FEDEB209D49F5487F8D8709DD
-:10E78000F27169DD9D2CEE48E50DBF7F0DCFD18183
-:10E790007FF8797A7F8196139BD6AF1888F0F5DBE6
-:10E7A00080AF4270A27C036555AD11E875D1525619
-:10E7B00016F373E9456BDDC89F45EB587EE11E5BA0
-:10E7C00032AEE70CA75762881C00F9272E0E7F6532
-:10E7D000DD799C6E4F353CD10CF352FAFA13E0739D
-:10E7E00052E3634FC372157A3DB541C6714A22B5F3
-:10E7F000E7F6AD7CBC6D0718BD4FDC20E7C0FD5FC0
-:10E8000013BDC40E71EC37366C14417EBF01F49C0D
-:10E81000CCF81CF4EDC93D0F46FD02F45CBB814011
-:10E82000BCFC152329D9A2E28BDDEB5FD5F06F6923
-:10E830005DF53518976F8B1540CE2B7CABC0FD1561
-:10E84000A3F32AE4FFEB74FC3F95BD2F473BB0DFF9
-:10E85000139CFF9F9841F99F3E8AD91023C038AF7F
-:10E8600018C3DF07F7F50FA4BFA05C6DEB2157BFFE
-:10E870006672B5CD964AE7AFB8B61BE30CC1F57129
-:10E88000BA7962AA4237C902C0BF96627018C08BBB
-:10E89000C215E899DACDB7DF90865CD922E1390F4D
-:10E8A0003F47E2F91FCA77020ABF86E499C2B76EF2
-:10E8B0007334D8D553AB56805D1F97E745FA3C2596
-:10E8C000B887C6527D760AF8388C3C38C1E5C75700
-:10E8D000B2FB62F7EE0F007A2EA11E22EC87AC137A
-:10E8E000EC8017A5DDB18EDDC33A3C5AD09CBF2B1E
-:10E8F000F51F0CEF408FFB418747637C3A60843CF7
-:10E90000D5113EA6C7889083FC400C570F003E5B94
-:10E9100044F5D7CD2AFD754AAE453A55E0707934B5
-:10E92000935F5FC5B07DFF95D38515E285AA732FF0
-:10E93000EA904802E36751607C2EC2F8A7F64CBA11
-:10E940000AE9FDDAF0F46E07FF2A16FE3DA7F54846
-:10E950009F3133ECF81DCB1392332246631FF9B07D
-:10E96000DCBDF157E8D701FD02BFF746FF2540FFA8
-:10E97000240CDDFB28DDABF0A7D001A58B6BA255E5
-:10E98000F2414F17CA79A302975774E7954F47335F
-:10E9900079B080978E5EF26694FDFC603C9FEC81BE
-:10E9A000E7F90CCF21BE027C2BF2E16717E1AF3D06
-:10E9B000D1766CAFF97401E6A9D4F273AB7A3E9FBD
-:10E9C000B2EEA5D182E67C4B7FEE34CAE2BE2B5A72
-:10E9D000773EEA480BD1C7346ECF2ED968C273FF99
-:10E9E0002DD00278DBCDFEBD6CE53DBB440D4F0A5A
-:10E9F000EA15D14C8E2BF4E1586624C3A8FFF255DA
-:10EA000072E16EC8FFF959AB376F34DDC716A377D3
-:10EA1000F6B5E80738AF82F1AFCA33D8211F24C654
-:10EA2000651720DE81240A7CB88FCD332ED5791965
-:10EA3000FAC90EE73890070F737C29F855E0D09B90
-:10EA40009EEB0DAF7B387CE279BB5E8E1473FE9E2D
-:10EA5000C2FB5D5C8E7845E0271B712F1761FD5965
-:10EA60004CFE05E54816C173C9977572E4E59F5ED3
-:10EA70008EBCAC912313DAC2CA11FA0BCBFFF11B87
-:10EA800016A21D4B0E87B7637746333D1C0FFA93D2
-:10EA9000F68BF7B2F3DE8739DD528AC4BCC9DA0DD2
-:10EAA00026CC1357E4906D36C9817FAFD906FA168C
-:10EAB0007ACD761F9E0CE7C54946079C5F9F92035F
-:10EAC00088F753D401AF45FAC8C7FBC7C3C82302B0
-:10EAD000F112EF4783D0EF9C2636219F2C994650A8
-:10EAE0007FEEDE7805D255495E8A00745B5A1723A3
-:10EAF000407BEC54BB01E494B28F2B9619C8B071E3
-:10EB0000C80707D472E40A6F15FEBBCD43E3DC49A6
-:10EB1000720C21471F3DFB3375BCA88DD6D5F12261
-:10EB20005A7FE0FBC48B8E46071E8078D13F6CAEC7
-:10EB30007698779425FF28EAB7C42A91A8E4D6C529
-:10EB4000ECB71F4A2F953C2E455AA9344ED0C481AC
-:10EB50006FAB73601CF82B584FC580E34FC37078C0
-:10EB6000AF46587B9BADA31F970BE41382F8E89741
-:10EB70005F2542FC45913B067BACE22F0B9097A1B1
-:10EB8000F0DB7F031C7DB5D7008000000000000093
-:10EB90001F8B08000000000000FFCD7D097894D590
-:10EBA000D5F07DE79D2DCB2493C9427626ECBB039F
-:10EBB00009ABB14E086090040710448D380990B03D
-:10EBC000640391D2D6968120068A182BB554B10ED3
-:10EBD00014FA51451BB61ADBA013401A143456AD73
-:10EBE000D8AFA561911D8980FDD38AE53BE7DC7B29
-:10EBF00033F34E26026A9FE70F0FCFCD5DDE7BCF4A
-:10EC00003DFB3D77492D63793B22199B90B350ED35
-:10EC100006A9C9CC3C161B831F2F6343793E7A0893
-:10EC2000E659986B20636BF27579DE018C5DC79FA6
-:10EC30003BFD69A2153E8E676CFED630EB4933B5BD
-:10EC400067D7E17F795D8C265F599F643DD9C79F67
-:10EC50009F8FBF24C1FF334CCF12182B63E2A7E173
-:10EC6000CBDFFF7018B4C7DF55C6DE54DD89568090
-:10EC7000A7DCDC12D5DDCED833F9C713DC91D45232
-:10EC800087DF3D22C67871B9E3BDDE718C79DE5530
-:10EC9000D916C80F36193D4A34FCE264766B82E817
-:10ECA0000F7E9406C5671904F97F43552C6397FEC0
-:10ECB000ADA3F4C59FB8F232E0FB8A7A9D6339B404
-:10ECC000AB685018CB62CCD19579CD198CD58547DE
-:10ECD0000D62D05FCEBE48A701CA2F2966AF298337
-:10ECE000D100088741C23FA2357D1BD4573798D841
-:10ECF0006AC85ECA61AC19E1D53BA2D9003F7E0764
-:10ED00001D7EA60FCC00CA6B1D2E0B639BC278FF25
-:10ED10009BC2647B7B3483B4DB92D1EC04C0A7D765
-:10ED200033160DF481C48369F6926E03F499301F93
-:10ED30003DF318804ED9AD3E15F1D2ADD5AE6391FD
-:10ED4000FE71F4AD8CE6DB4D6FD73960FC3A81F78C
-:10ED50009D4D3B543DE073D898DA6A15D2D228F71E
-:10ED600058C4F3A8ECAA6A2C8FCDF7A86E689FA5AB
-:10ED700054EDB3005ED878E6D802E5CC07838F84E3
-:10ED8000FA16D61805D998232DCE28281F75C6D96E
-:10ED90003800E61DED620AF6C7D8321ABF5FA4CB71
-:10EDA00085FDB238A75200FD0CFB0723BCC87E7658
-:10EDB000368D56EC006F5CF318C51EC05F304DE217
-:10EDC000ABF5CCFE53ECD77348E740BADAEB987357
-:10EDD00023B4EFFA72BF312CCADFBED2AAD078B703
-:10EDE000BBDDB94646F379D80ADF8F9CEEDD6700BC
-:10EDF0007886CFF1EC33DA03E63397517F292D1E65
-:10EE00009A47D211770EA68B2D31D4CFA833BEC628
-:10EE100001D0AE4B15CC07CAD39A3F5410AF6955F9
-:10EE2000CD0AD27167D35E8237B5793F4F8111EA3F
-:10EE300020DD01725517308FC5161DCD63B145A178
-:10EE400074E5C599892EA87FC4EA5E6C19EA9FC74C
-:10EE5000CA1C776215F4BFBEA95BFB7C7B02BCB702
-:10EE6000C1678827D9DF72AB91FA69B2B87F84F3A2
-:10EE7000AB9CDE7200796F47D39FA3482E1AE288BD
-:10EE8000BE09878E133D129600CEA078FDA1850A9B
-:10EE900083AAF5854033A5239E27B8DD8E31998856
-:10EEA0006F809FF8C71A3109F8F2628CBB06C791D0
-:10EEB000ED2714D922505FB4E7C577CF2E658E5960
-:10EEC0003D00CFFB8B77B26E4877F712A47B7BBBFC
-:10EED000818F87213F318BB316FBBBA4B0E938CEBD
-:10EEE0004B9842F94B069E97F8FAAB95E3EB11EB82
-:10EEF000A4C596788E272BF0F14B61BC5DB01E7ACD
-:10EF0000D7CABFB30B7E61CD9C5F701EA8BF64BB28
-:10EF1000DDA2DFDB9DEE5C3DE793CD08E7C811DEA7
-:10EF20007DC8B7C3F33CFB90FFD398E0933CCE275A
-:10EF3000C1FCBECF6AA37E469D696588F72C85B962
-:10EF400002E92ED3D710AEA1C8DFA3897F401EB639
-:10EF5000E378C352AA54038012C7AC135877C6DEB5
-:10EF6000B6DAA95DE608E73EE437ABD345F27C208C
-:10EF7000C24AE52B33387FC0F77F40FC05CBD32E48
-:10EF800094A3017E398A437E8CECC88FBF13F0BCFA
-:10EF90002DE4A563FFEE3F61FF71CD3AA7029D0C02
-:10EFA0003F12E965D074F8A22A15E18F63C0FF0013
-:10EFB000A06D8E3507E52CA5CCA1205D9B225C873A
-:10EFC000ADD40F23BDB93247E7AD86EFE6463B89A6
-:10EFD0007EDFD83EEC676636CC6F1FC01EFC15E1A5
-:10EFE000037BB0B608F5F46FFF69443D6A97F2D72A
-:10EFF0003424A238803FAE48BDE0A7F771D20B4160
-:10F00000F40ED673C1F4F6EB05AD9E037C5DE0F41F
-:10F010007067229FC5352F52B97ED0EAB5CEE8D1B0
-:10F02000413F083A5C8A707E81F85C0C3288E37A52
-:10F0300046B33E58DE991D0E8B89A476FF453B1CD6
-:10F040001613DFD10EEBCCAD0715C04779836A5795
-:10F05000610AD58FD99C48FF17EB148709E5A441B5
-:10F06000257E78716538D94B09EF67BBA307B1DB03
-:10F070002015F2CFDCDDC98E56C688F1ED9087F100
-:10F080002F5979D6687527C504E893171BBE084326
-:10F090003CF74F64034EC6620BA7D60E830829F0D7
-:10F0A000BD097F5310AF836B5414AC69EE9D269558
-:10F0B000E8D61DFB1BCE5AFE9C0D70BDBC6DB4CEB8
-:10F0C0001DC837F55767EC05F82B23B85DBEB4F7BC
-:10F0D0005A2FE433597FF79262D27B3F072B1913E3
-:10F0E000A01FDFEE7382EB6156683DD51F87762A3D
-:10F0F000D723008551E63E7AF427D47087AAF527F6
-:10F100008839AA7B027E107F8DE184BFEA9E20773A
-:10F110001904E748EC7FBFC5C892A0FC0AC823B613
-:10F1200093707F03784707E2D10F6FAAF55484E00C
-:10F130000BD50F5F3B5D900ED0BF6AD1D33C2EB193
-:10F140007007D2B3CEE864487FCF51E11F08BA55AB
-:10F15000089EBBD430F4881BE6F7E29154077E7F0B
-:10F16000A9FE4A982E12FD46F7149C979AD61A8546
-:10F17000F6705FC395BE2D0348BF4DC5F22B874E79
-:10F18000D8DC03BED1FC6684A687767E95FAC89A41
-:10F1900040FF50617C7EC17CA43434FE4B1944F2A4
-:10F1A000C7501F7AD299B71AE6BD72A0E0A77B9923
-:10F1B0001DE53E98DE46ABAB2226406EFF15EDAA5C
-:10F1C00042B8709C942134CF85981F747866A6410C
-:10F1D00087F31BC3D06E4A7F0FFDEFB0217EFF4E39
-:10F1E000CEAF7DFE3DAF0D3AC468BE3FC67100F89C
-:10F1F000E53A80AF128CC1EA8CC079FB881EE562CB
-:10F200007EE5E6489F0AF361BB0C175AA41EE8D6B8
-:10F21000117EA04F0DC2E719ED38E246FAFE35D255
-:10F22000518DF8D1375BD15F85F9ACC67A36A2280B
-:10F2300011E7DF2FD2B905F5FC4BCB18F1F3A55739
-:10F240009877134C76FB7E1DF1CB46D68FF8BE9F88
-:10F25000EEF20C5724C9F33A843BABB956877AB720
-:10F26000A7D7AE437DDAB7B94EA7233E70FF2286FB
-:10F27000FCE49957F4005FFF6D55EA37E4076F68C7
-:10F280007EEF40AFCD81F49278CB167C908D7843A1
-:10F2900083D0AABFD062F6E30DE8C3526C1DFB63B6
-:10F2A000AC251DF1D4F8FAE95E2DD05FC51BA76728
-:10F2B000205E2AFE60222618F387BED1C8EF9FE5A4
-:10F2C00084F6672E2CAD72E8C19F7A25A61BD985DE
-:10F2D00032D66C443FA1BC6E81431FA0CFA5FF7600
-:10F2E000C8D09C8FFD1F1AAAB26580E72B8EE15D06
-:10F2F00058083BD1EE2FA1BF06B02F47D811CFAF92
-:10F30000674573FFD146F620B8FDA1A5731C637A4B
-:10F3100074DEDFA1C161D3BDF07D7E901F743486A1
-:10F32000DBB5B6186E8741213B11CE8BBFB7783D58
-:10F33000507471C847510CFDCC5D1F647A808F2ECC
-:10F34000B2E647FE8872763592D671F9833FCA5C81
-:10F3500066F1CBE51D23F8DCEF78ED70941DDAE75C
-:10F360006FDF17E709C0DF1D4C7FB59DAF33705CC1
-:10F3700046E3337D4B2FA407FBE3D9043BA4F9AF4D
-:10F38000BF15C7F9204187745E24F4DBEFB028C0B5
-:10F39000DFCE5F52417C24F3E56D66E68D0DC8EB50
-:10F3A0009B8DB8042E6F8B645E68B737C612477AA0
-:10F3B000269925A39EE9145F3789CFE07289CF4350
-:10F3C00083CFA6A35FF15927FE706F1B6FD7CEF7CF
-:10F3D0004BC14FD7FBF3EF7CA53EEC0AF15D848D6A
-:10F3E000D3E98A636417F4F7F28DBE1ED610EDE4FC
-:10F3F000FA32184F6F5F2B8DC07E7FDF66CA0B0518
-:10F4000097DEA6FB767ECA21802AC01FDCA6BA53EF
-:10F410006DC21F9C0CF98ABE57C6D1BA5AF28BD066
-:10F420007B77304F23CA6F307F487AF7B001DDFA1F
-:10F43000A372662948B78B3176CE37421EA47C046E
-:10F44000E331389D6064EE50EB80AF62245EC39878
-:10F4500007F4E1231B0D64DF0F5FFBF8DE4CE0F7E0
-:10F46000D31B0CD6E530E49C17F6A53E03F57306D6
-:10F470009BAC0AE44FDB7D3D50EE4B5F505DC80F07
-:10F48000A7373C923013D2F320BF650047E946030B
-:10F4900095CFD9F828959F15725DFA427C7FD49755
-:10F4A00087F7AF4E403ACEF9EA89694897ED466B47
-:10F4B000FFC190966D531C6302F03D6F739826BF99
-:10F4C0005DC7E6E03C245D99E26EAF47133FD5A6E9
-:10F4D000FB76711F9FD6DF04FF72AAA0E3C4293018
-:10F4E000EF8AA157C8AFDF77209CECC99B912AF91E
-:10F4F0008FBEC1FFEF9DDB209FFB95DE41BE9DA02F
-:10F50000F3584167B05CA4B74BCC3C9FFBBA9EFC60
-:10F51000CF5C8B4AF886F69163A1FE7BA2BD0FF407
-:10F520002CCA2153B3D78D847663A30D0CEDD0F78D
-:10F530007CF3F219D8C93BDBF4C75B02E6339AD5FA
-:10F54000F6417F38871982CA9D7A2CCF356BCBC79D
-:10F55000F6B8FB2CFA0F63ADDA72C9778FD8B4FA1C
-:10F5600062DF81733F9B00F32B39A492FF7C237DE4
-:10F57000FC2EC2AF473ABF5DB80DBE3B2CB072F84F
-:10F58000DAE91549C857231486F1ACD3D742CBE347
-:10F590001FA45E6640DF3E7EFA1638E6B6E751DC11
-:10F5A000EF19B1A03D8FF0DFBC1EFB7A3D759B8D3E
-:10F5B000C73382ED46B0DCFCB7EC46FEE0B7D23D87
-:10F5C000164A7F83E985ED5CEF06EB89603B21E11C
-:10F5D0000A86B7BC4DA7B10F5FA11E191A68278C08
-:10F5E0006427BEC3F570836D68C7F530F831842F8A
-:10F5F000CF303DADC3C1DF6AC4760322EDB139001F
-:10F60000D20A6BB708B27F16F77E5B401CAAFFB622
-:10F610005A1DEA8DF6F88C411BA791EBD577849D96
-:10F62000A813FA1CD6ABB4CEDF18EE4ED4E3B8C99B
-:10F6300046C7968C8EF8F948B4EFCCCF957EACBE19
-:10F6400086FBB18F585D9A3819EB93A889FBA25FAE
-:10F650008EF2EDD91B4EF3FC54710D4239D433E7D1
-:10F66000DF6D01F4A93670F883E1898FE576923178
-:10F6700017F907B27CF6E8D07A5C89D553FB9C6712
-:10F68000EF4F47FFEDD3C607D251BF7E1A14E7ED07
-:10F690004C1E9E16F2FAA4B02331222EF014CA1189
-:10F6A000E441DA9DDBE1FB554B5D24573F5D3A9D1C
-:10F6B000D267962EA1FA13B60C1ADF9AF367577722
-:10F6C000C0D3C9352AD989D94657AF18F8EEA459FD
-:10F6D00047F18513559179BB22B19CD17A72F6B36B
-:10F6E00013B67802E27E276C7AA24367F38C8FFD13
-:10F6F00066FABD9CB544A1BD6AE7D7231DECB52DC4
-:10F7000016E37FAC2501DB552ACDBDB6291DC7B751
-:10F7100032677C2CF29791F547B9A90BE7F628B828
-:10F720005D4A2CE7C3BFA11F0BFD7E8A762B849E0A
-:10F73000B10B3A2FB438EDB1A4EF22C95F27B881DD
-:10F740005FBE8C727647B8605DD613D3615D787CFE
-:10F750006EB1C52AF8C3A9F0758EAB5F6C88F85BF3
-:10F7600067F19E6038DE11780D8E03C954C681861C
-:10F77000C6F2F9BC6DB36AE24218FF0E15FFF979C3
-:10F780002CD7A31BC35B3C2ACAC3037C3DDE25DB0D
-:10F79000A3607C2B25BF3607E35F77C5F2B8A52DA4
-:10F7A000CF9D88EBF6E444A303E336372B8F03EABF
-:10F7B0009C7C5FC0AD2338D6377BC27A015C09CD13
-:10F7C000EE1C23A45371310DF8EDC2AA9621DDA0E1
-:10F7D0001D21236B7FB857918B6C689229F42840C8
-:10F7E0001A8672678C724F45BA0C9B55558D71FA0B
-:10F7F0009432BEFF70567177B5019F9C7D2B3CA45F
-:10F800003F5C22E8CF94D1C968FAB3361B08AEAC8E
-:10F81000CD3F9F817C9FB5F92EBD12A08796C71A58
-:10F8200068FE67DF9AD795E2169F9858CF107AEA5C
-:10F8300087825F1E1074D8690CCD7F8B45BB6FAC7F
-:10F84000CF5B405569F5F9E2D880385B45F965D260
-:10F85000E79363ED34CEF3FABA03C980CFE767319B
-:10F8600087078AE66DDD48F1D79DC6BAF1B8EFE4A7
-:10F87000A9D031A4FBFE037F38908C7EE42CFB6082
-:10F88000F423DABF3FF4D24A2C7F7E0E1B8CF84F54
-:10F89000F23EAD603CE69F61B584AF7F6E31B165ED
-:10F8A00018B77DBF6EFC0F21BFBE4CC750BF04CF41
-:10F8B0001B4632E81231F519742338FD510F4ABA4C
-:10F8C000030319911E926E88BFED90EEDFF21AC10C
-:10F8D0002FE19A2AE2DEF3B66E1F8F7C925C6653AC
-:10F8E000304E20E1BA913D7931F6DBD993EFD00E5D
-:10F8F000BF121B222E1DC20EEF880D618783ED2FD4
-:10F90000B3387763BB1BD9E1E182FF36C606ED7FD2
-:10F91000E07E5908BA0D8DED100FDF1F1B62FFE36B
-:10F9200046F1F0DEB172FF431B0F7FC9C8F56FAD22
-:10F930008D3D3C2984BC7413E3EBD6B51AD17EC649
-:10F94000352821F5D9628B51EE1F7E1C1BB05F124A
-:10F95000AC8F43E0F728B6EFBBCDB7175B0D89E955
-:10F960001181EE5BBFEBB0DE0D31CE29813FFB2272
-:10F9700046FBA6F62A46FA0AF25E1E14F42914374C
-:10F98000B0384F93DDBAC1BED59DD61CF283E43E9C
-:10F99000D554ABD64F8C8B93ED9C9F239C699DD8FF
-:10F9A000897F093CC1FCDB70DCB8454CB31F23F7F1
-:10F9B00061E2AA3C8A310BCD11A3F86AD758F7321D
-:10F9C00003B46B1DC91C9B201F5D68CD417D6A9BE4
-:10F9D000E368C4FD9A9517793C7EE502E65D4EFD2D
-:10F9E000F0F93277372FCA17D22D302E1011C7E118
-:10F9F0008888E3720676D21CC7E10A8F0BB0939217
-:10FA00001EBA753E95E8DA1ADA4E05D0D546DF778C
-:10FA100042D7EF502EED7137E71FF78CBB05BE19AB
-:10FA20001877737CF3144C4BECDF048F9789F30F3A
-:10FA30001E0FF82C2BEE26F8ECEA2DEE8F1E8850C8
-:10FA4000BE5DDCA5235E27C485D0776BF2757D484B
-:10FA50005FB3704728BB3A232EF2BF7D5E6486A059
-:10FA6000F72D9D1779F1272D46A4B3DCF790F0060A
-:10FA70009F1391E5150D4A26AE3F73F65DA375C041
-:10FA8000A5C67FD33AA0E3790F3EEE42E403806738
-:10FA9000AC3AA0CE07F277799B9156EA2AB3FF22BF
-:10FAA0001BE3F64D06E6B5537B33B6EFC778FB7E16
-:10FAB000DB563663DCAA1FD37BC47A54B9CEFDA8CB
-:10FAC0006894E37E4D2A5B8DF9ADBCBE8A9997613F
-:10FAD0005C3A7A848ED903F019E30C67F6007CC691
-:10FAE000E6D93479B94E9E2FC68D77256BBEEF329D
-:10FAF000BD9BA67D92BB9FA63E65CE104D3EAD6AD6
-:10FB000094A67D57B0CF81F90CCFDD9AF6DD6B2638
-:10FB10006BF23D6B1FD0B43FCDAA9ECDC6797A9CC7
-:10FB2000CD3D00CE5902CEDEEB8B35DFF5D7D50DBE
-:10FB3000F3A120F9141FEEFFCD166C324BC473FAFB
-:10FB40007AE769FA3DFF6A5E9302F89D5D6B3819AA
-:10FB5000189F217C007E4BEA15F61C8C5BBA5E5B1D
-:10FB60003FA7E1E9952990CEF56ACBE7E1BE9C82FB
-:10FB7000FCAD2DDFAD733D82EB9DED7122CE28E211
-:10FB80003DAC037F44D2B89737F07897EAE91DC4BB
-:10FB90001F5A3AB16FC92F76C12FA6442DBF84D901
-:10FBA000B5FC527A70E7301FEB88FF883E417CE459
-:10FBB000817F017897F895F8B738B47CF55DE19DC1
-:10FBC00031AF91DB0D6DF93FE2B4F1B57E91EEE31B
-:10FBD000A8B7AED42F5271BF8DE5F17DFB2BF55741
-:10FBE000071DB26BF6D73ADB4F3A1717185717FBBA
-:10FBF0004997703FF1367613FB89FBFE85F800D9F3
-:10FC0000771B801FD80887B97DFF30CCBF7F14AC2D
-:10FC100037650A76E3CB38B227FE7DD76AF87A5883
-:10FC2000F45F5C08AFDC8793E772E4F92116C9E75B
-:10FC300029FB013CA8F143F1FC9F2D02D7ADDBF776
-:10FC40002FA4F5963C3FC4C4B9BF107E3FE9EF3AFC
-:10FC5000FC3589FC81F0786ECF23316DF707C4F94C
-:10FC60002E69CF3BEB47EEB775962A7B55DA3F6C92
-:10FC700055C21D9B42D8935EF1DF72FD75A6431CF1
-:10FC8000BA577CE0FAEBD12B07D0AE00DEFB62B9AD
-:10FC9000C502F65AF1DBEB5F444411BFB61E54BDFA
-:10FCA000BDA1E0B2D91E6D033C368469ED884CAB32
-:10FCB000CCC903F4B158AF3DE727F71183DB676385
-:10FCC000FB80FD27F84EE38FAC1CC2FDB5EC786ECF
-:10FCD000DFBF88E4FEC11491AF0C5A1755D670BF30
-:10FCE0006C23F8E90D01FD4C89B750FBA511395380
-:10FCF000E2298EC0D7BB2B3314F227562A0AF921EA
-:10FD000067A24753FDB5B89CC9C43F629C29E8BBB4
-:10FD1000C1FFDA6E1C1EBB388F23FB37C7F3F6E634
-:10FD2000F8D1944E89B78AB8B3B51FF2476584936A
-:10FD3000FA35AAA1F7A5A6C7F379ADB530E9276AC8
-:10FD4000E2FEE384DEC438BF89FBA3F96313FC71D0
-:10FD50007EA6667F688C13F17D853E77A29EBA539E
-:10FD6000D0BDB378BFB38F753F6E27758CF7FB128C
-:10FD700043C6FB1DE328DE0F5FEA715EC1717FA4FD
-:10FD80004384CD2F3F8FC4B7DB8354D44FF54677E0
-:10FD900035AEBB5A7783FF0EC57DBC2DB41F30F046
-:10FDA000507707AEAF5666B0BD16E4B7658CA17F3D
-:10FDB0005FDFA25B1E06F56B3CCC8AF52337F0753E
-:10FDC0005BE97ABB03A7698075B065885F1FAC8B60
-:10FDD0008F21BCD7B74C6EC4FD8135F7321B9AA179
-:10FDE0005A569B1B85FED0061672DDF89490B30917
-:10FDF000397B55D417F1E8DF87A0D353824EA00F8B
-:10FE0000D6229D87B7BAAFF0FD38AE4F4825E2FA4B
-:10FE100074BFCE1B6A3D3F373A771DF2C1406FE891
-:10FE2000F5C35A0BE7B77511AEE7A8DD2E7EEEB528
-:10FE300054EADF593AA607BA4F11749DB2819FDF89
-:10FE400060D7AE5F57A59FC8A87F867AA5F45E8B62
-:10FE500017E343A50D191E82CBA5387AA2BE687898
-:10FE6000DF85F9D2AC2C2BC6239C7F65CAA93EE462
-:10FE70006232AEBFF4EC94D42764C7E368DF69B2A2
-:10FE8000E0B7B5163B3F470D288E00FC976E58B67D
-:10FE900017CFEF7CF46B46FB4B47D4D661D8D954CF
-:10FEA00040CE922198EA5921C52BF8FED5BDA21F5C
-:10FEB000CFBF615CB37FDCA90D07693E470CCC6303
-:10FEC000063EBAB4E73E3BFADB2BE3CD14C793FB07
-:10FED000B24755F7E36484F4AD1508DAFD0D115609
-:10FEE0008C7FFC43F05D46827B1FD2C7BD7C7C05C6
-:10FEF000DAC19665A674C4A37B79921A0770BAD743
-:10FF00002A34EFD1CB938C787E61E68AC1E3504FDF
-:10FF10000D61CE9518DF7928968594D3F3F17C9DF9
-:10FF2000585C6560C6689A8411E32F176B148ABF0A
-:10FF3000E0FE5B01D0678E985FF9AAF7A3883FECDB
-:10FF4000F06F181ECBE53F73AA4A491EC1CE6BE481
-:10FF5000A78CD51993A09F796B6039DB8DECFDF1EF
-:10FF60000EFE43C079EFF23A6D7D255BF3399D7F3C
-:10FF700061E0EF5BD02E68EB3F95F2E8600EA4AB3A
-:10FF80007BB1C58CE784460BBC14AD51ACA85F6651
-:10FF9000AE688CBF0FF2339B5407F2B4C40BEBE88E
-:10FFA000EFD3398FCB4D3D693D70D96EEF82EDDCDB
-:10FFB000515CFF2B7AF7702C7F28D63D1CD7F1AD12
-:10FFC0009F58189E9B39D606FE18C61ECD6C10C5CC
-:10FFD0001FAC6CD0A4003B5A64B02660BCDFC316D3
-:10FFE0002632BEB7650E9C77A5790DF98195E80795
-:10FFF000F2F9911FF8502C67D5D6D7153A9FC3EA6E
-:020000021000EC
-:100000000DE4079A851F78D65E9B00AE17733D6E90
-:1000100020392DDE16437E68F18A5C23F26FF1AE43
-:1000200018D243E0077ED863989F8EC756641E4857
-:10003000847E8BEB321CAA967E5AFFB8E698A45BAE
-:1000400047BF4F4BB793A1E806F4D294A72408FF0B
-:100050004ED08B3D164B7E47E182B77A9A019ECBFC
-:10006000556174EEA833FF83A5C6D1BE9E5C17E62A
-:1000700025B7AFDF68DFFCCA9AA144B7607AE5FD17
-:1000800067E670B427ECAF16867AECA1EEECE1C916
-:1000900050FEB0C2E5EBA1EAF17928A759095C6FDF
-:1000A000BEB714666864ECFDA566E6ECC5D8074BE0
-:1000B000AD94FF686922E53F5E6AA7F493A57D28A9
-:1000C0003D29E26852CE8001885F472570F91A9574
-:1000D00020E2DE6C5122AA8CBCFF7C305467C5A1A3
-:1000E000D2278C4D63EC1E272023C0DF997E6F043E
-:1000F00012B93DDF62B08E4B44FF719542FABED813
-:1001000075BBA63DF825463CFFCDFA64FACBE99CC9
-:1001100098DD3819F8F0FEFC584DFB6935299AFC3A
-:10012000E4043BCD7B525E774DF90385FD35F9A2A2
-:100130003640029E2F30DBF8FEAAD8B767CCC6D770
-:10014000EB56DEF66AD5F02EDF0778AF1E32507D13
-:10015000303D245D67ADD731378036733DCC0DFA25
-:100160003D593B93E4EAFC110BD9FD95DB32DF1DD1
-:1001700001F963DB0CB4BF7E6C45EC5ADC3F3EB644
-:100180002D3E8A41EA5EA9321FFAC17AAB9105E899
-:10019000B7DC15CBE8FC5691D7E440F92FDAEFF93C
-:1001A00095CCDBD11F4420513E3E54BD3E85E8E74F
-:1001B00024FCBE14E6DD02F933A0AFF1C8F8CC167A
-:1001C0000ED71985ADC0FCD9B0BFF5FA3EC071B1EC
-:1001D000A0B64487EB01F5503CE9CB1D2A43BE2D68
-:1001E0005C60A0FDBBB91FA91B31CF9421299CDE07
-:1001F0002A9D47642F99A87FD60A1C02ED16FDD6CA
-:10020000B489D6774CE4770FF4AE16FC897C74265B
-:10021000863963085885E03DF77EFC46ACF7E3D3AA
-:100220003B08E7FDA5DEB53201F8EB5C897710E904
-:10023000B5C7E249AE82F17ED2C8F59607E540F136
-:10024000EB4BBF9C2D273E9D69702438485F652588
-:10025000A1BE3AB9C640E79899DE193589D63F3B29
-:10026000888FE53827F5F67108DFC99A0C86FB966A
-:10027000C56B54F20790FF787B2FE7FFA755371B1C
-:100280000EFDD6286ED6A523DF3CB260389D639A5A
-:1002900021D641C17AE0339055772F7F7EDE1E7ED6
-:1002A000CE8665B5E8EF1D18388F157CBC44DEBFDF
-:1002B0003C0750D6ED4F47D1E5BEDCD43D1AEDF0FA
-:1002C000D90F55E2B3B3DD6A8725023D2FE8F60E5C
-:1002D000FB3EE4CF17784EE921FF54B87B6702AEAE
-:1002E00057746BD2956E783EF6C4DADBE1BB73AF20
-:1002F000181C24E64BE2497FCC7B696ED7C0F38E95
-:100300001DF5972F99EFBF389314C0E77C7BDD383C
-:10031000EB005C77BB841DE2F8B1E3E62AE0C5BAE6
-:100320004EC143C3ECC450CB6A3C773D13C4243068
-:100330004E7842EC8F1F107A45FA09115D787EA63F
-:100340008EF3377B5521BF0D7E34FABF529C4F94FC
-:100350007A5FEAEB32564BFBC14712F839C6B98ACD
-:1003600097DA55E0CE2EA8A8122B0F42976D35795B
-:10037000BD19D49735D00F48EE62E7FB43C6579EB0
-:1003800045B62D65CD7C7E41EDCE19BC25CD191D20
-:10039000ED4D8975E30A1BF56F7060FCA454C869C4
-:1003A00079ADE2F5F17990DD94F18AD9C26E06DB80
-:1003B000A70EF628C80ECD0EB2B3AC566B5701DEB1
-:1003C000481C47C21B0CA72BC24278980770A1BDDE
-:1003D0002D717B0F4C24B8150750B2033CA5CC35CA
-:1003E0002606E701F53E7B47F882E7D5015E31CF6F
-:1003F00060B84B1C9FFB70FF18CF8751BC29681E4B
-:10040000921EC1FE9AA44B8987E3B7A441217A7E4C
-:10041000DAEE07328A1B497E8105509DF67BD74470
-:10042000D467A5EB40FF66F8F947F2D33C56178531
-:10043000FC52C17C2B9350BE7C75D346A2DFBEE13B
-:100440007D23CA49A1CDD7531783285CFBD3BCB405
-:1004500080F544109E6F44D76F8A379C955EC6BD69
-:10046000004FB337ABCEB0419A76E21C9187E4607F
-:100470008EC763C4F8C61CB1EEBF119C957A7E6E20
-:10048000FC86F076E2277D5BB8F3BA68FD62BF9F19
-:10049000D5333A949E6AF7AF82ECFADF0C3C7E21AA
-:1004A000F5F155BD93E225502EFCAE2A2B8F9B070C
-:1004B000E9F1B42CD2E325C2AECB714EADDF49F1E8
-:1004C000B7D968F703CA3F5DB793E2FEC6576647E0
-:1004D000A1FF7D6AFDCCB578BEEBD4B69964E74B3D
-:1004E0009F9376DE6D0CF41F72D717BDF863E4DFBF
-:1004F000AD61149F2FD9EF16EB1ED0ABD0CEBE9EB0
-:10050000EB51B68EEBD552B48703C81EF6C6768B78
-:100510004BDCBD510E02CAC94E2E9EE9FEDD1EE81F
-:1005200077F1CB110E0FA1C2EAD391DF6EF5A13D99
-:100530002C5FF8F1513CE70EF6FFA31F48FB0FD9E3
-:100540008D7AF7922E286FC2EE97AB1BD3ADE827BA
-:10055000083BF15FC0BF3934FE8710FE8B11FF01ED
-:10056000FB20C76B389E6706E1FFC41A4E9795DBE8
-:10057000BA47E1FAF1784D77F2B38E6FEB49F89F05
-:10058000B51AF0CFE35F5A3FAB06F08FEB08C43FDC
-:10059000C05BBCDF2EF0EFE0F8AFE178676B783A34
-:1005A000AB039E3D748E61F1AF4D0EF41BCE84F90A
-:1005B000C89F3AB35D65D5017E98F483BE60B5BF30
-:1005C000427F4DE27F6EAFE641A87F0A9FFE531443
-:1005D000D261EE761EA4EF807FE6EC82FEB87FFC4F
-:1005E00076BFE9952EF1017ED34DD2A982B918D9F3
-:1005F000C5863F1DC17583E2844F6D788F46DCD779
-:10060000A8D7DED7C0331985368C2F38CC6684271F
-:1006100035F81E8A9B611CF99F3D3F9FB190E4BC59
-:100620005573BE6D22F319BAA0FF58A7D0FDC6F2CC
-:10063000453951390CE3D45504C7E92E8AE6FC78D4
-:10064000B9AA23FFB1CCC8FD48B93FF9AEF00FDE1F
-:10065000EDC2D725EF75B1D27797C218D9814B1665
-:10066000A317EF23C07A2A11C7F7EC3111DD8E22D0
-:100670004C807FD528E2366002914F1F649C4F1F4B
-:100680008C6CA23839AC545E40BBF8D0129383FC1A
-:10069000DAB8688AD73E20F4DD83912B5D681F1E8F
-:1006A0008A343A31857E3D7888CE301A8687F10DBE
-:1006B000C946BAAF53686E790597BE0F279E78D4A6
-:1006C0000CA0DE06EE37C655E0D75DD7633BD2C53A
-:1006D0004F1F6D9CA7323C74DCA355E04B713A2947
-:1006E0009E6382BEC3018E2B682FB1DC6EE5F19D47
-:1006F0000D40278B9FBEC1E5CCC3F703CAF05CE376
-:1007000028C6196404E15F932F33F2FAF0C4AF26D0
-:10071000ACCB66ECCFCC3E10E956863A04D7F74511
-:10072000D15E8C97DF83F1251BA67AE297C97AE622
-:10073000D1F1B42612CFCC8978D34481CFA92398A4
-:100740002F1AF0EE3BA88D77DDE7D3F97A037EEF21
-:10075000D1FB1A913F7566BBC10AE3B8F29421B888
-:100760002E295B7E73F0A6259AF3D7A5425EC7CFEC
-:1007700085B5FE80C7211E046145BCCDD0B3FDEA1E
-:1007800010CE0788974A9BDD43ED1628140F95710C
-:100790003649FFC1D07D201D1F14F0413F3551F86F
-:1007A000BD3134BDFA26CAF5731DADABE70BB99B5D
-:1007B0002FE56D9B56DEC627DAA9BD827E30E0EDBF
-:1007C0004191762617E344FFE312B95C64DDE278D9
-:1007D0002CB2359DCEB708792937F1FEE5F8F788B8
-:1007E000744CA28DFA95F000BF1EC77E74A00190D4
-:1007F0005F4FD656937F348705C4B533FCED245F35
-:1008000077CCB7EB11DD754C8DADB310F5CAF7C2DF
-:100810001CA8471F34D6F5AC8AECD84EEEDB14B2D8
-:100820006603233D29E261C2FE8C5523E97C40A189
-:10083000C2EF0F5ECAB17874D118A73110690B638B
-:10084000143A3FF137B17FF250F4E28928D785514D
-:10085000463DA633582BF5FB776BB7E8FB18DE3324
-:100860005631760E038FC877C2B8D5A877787E8DBB
-:10087000339BA24A227FC72127E0E1DE6B407FCA7B
-:100880007F2FDF09FD5F7A4BD4B33BE9FB4B8F0B26
-:100890003EF6E4F2FCCF657D1ECFAF92F5F93CFF4A
-:1008A000A4EC5FE49F0EAA5F1654FF4B9E5FBC3E14
-:1008B0003FDF837EEB68CED285A314D2537B84BE08
-:1008C000285CEE23FC16EAF6F27434F3E9B26EDC2F
-:1008D0006E53A26B0FDA1FD572D282F6F7D564275A
-:1008E000E59F4F702F4BC475D424C563447DFBA195
-:1008F00097ECC1C44ECE1FEDE9C2E3F89B92A0BFB6
-:10090000A17EFB05FDAC4E8CBFF57E1C491CAE8064
-:100910007E9EF926F0FCA7233C1BBE493FB392B54F
-:10092000FD487F484975BE86F36327E334E745E613
-:10093000FFC4118DF12786E74500F5F397D7A5672A
-:1009400042FFF35F7D3DBD04FD2561E72BDA74CCEA
-:1009500089F734DB18A5E71B3F31E27DB38A5D8D53
-:10096000C671D0AE12D2DC00B8CA049C60E7F49322
-:1009700003EC7383D01B8C3DCDF7375F3DAB477ADB
-:10098000CED7D59D7A0EEDF62825E43ECD66F1DD75
-:10099000D14ECE17EF157AE86A9AB311E7F96B8C4E
-:1009A00021403EB7BA93FB60491C5F85C2EECD1C67
-:1009B0006631DB01CF433FE4FB54251B3286603CAC
-:1009C000F8CD84D1EF247E6D3CB595C7531B783CA0
-:1009D000B5D0D6BC089437332695AD31DFC1D88465
-:1009E0005F48390391856FF34C325F9D3F269BC76B
-:1009F000BB307F76FD636B506E9AC2B91FFBD0F09F
-:100A000081E1A8175A3222745690E737E38B8C495C
-:100A100043B1FC8E71589E63B2F42A22FC32E28B01
-:100A200037E35DC7905FB03DC641DC465FFC7D307B
-:100A30000FF7DB2A9DA7750F8A7087DA77FA87C0D0
-:100A4000AB31C94A69139019FD1709871C1FFCF9BE
-:100A500045CDD0DFC9E5498357DB719F25C7903469
-:100A6000D43F7E4682FB72E0F82775AC172E296EC4
-:100A7000168E4B020E03EE5D03BE5DD92A7306ACE3
-:100A8000F3268F89D0E4EFCD8F65CEC038EDBD2938
-:100A90009AFCF4C2EE9AF60FCCEAAFA92F30356774
-:100AA0005505F8B19DFB491E82A7D26209477FEE2A
-:100AB000EF0D5FFCE541F4FF36AB0EF455E7EED9E0
-:100AC000F297DBA1D5653C4E45F1473BC5CBCEC97E
-:100AD000F3287AA73E705FE8226BA6F33E9DED03F4
-:100AE000C975EE7CEB7E3A77F65DEF03F54A12EBC3
-:100AF000DD216C08DAC3CB551F51BCAE2292CFEF7B
-:100B0000E2EBC78CB80F8AFB8AD781DFEFC20FD127
-:100B10003F6CF3503C3BB7FE18ED9B1D48E47ABA9E
-:100B20002275811EEF1D55428A76681CE8AB68E08D
-:100B300097E646367017EEBB6658B81FDE3699B199
-:100B400058E42B1EDF694A88A17BD7F36BF2A8BC5F
-:100B5000A22D9CFA7F4F6D1E47E7095F5368FFA1E6
-:100B600020E5A1E5787EB829DC33E01118B7E077FD
-:100B700077E521DE2A76F1F3B505EA9FB316405AF0
-:100B8000569B47DF17A8AC49017F61422EB7BF05CE
-:100B900068F321AF0EB3AC46BBAB1A7DBD9E473D9B
-:100BA00063B4909E896E7B80C6AF6C33D3F7F72415
-:100BB000717FD7D0C2E11ADBE6A272C90F5393BA94
-:100BC00069D60F86F8CD7A7C97C3D0C2A8FDDD6DBB
-:100BD000FD2895F37DBBCFAFE93EAE21FEEAB81408
-:100BE00098F7DB718A95DC90203D7CA56A78340B00
-:100BF000A1A7DAC769E3E7F44C6DFCDC5E618A7398
-:100C00007E12C031F1B1163DEE07B148B315F13592
-:100C100071C4607B49807CA97BEF37227D0CEBDEC1
-:100C200037A29D36419A1B505F2ECE3304EBE90567
-:100C300049524F2FA354DA1D767506F9A933AC82B9
-:100C40000185FCCC10FA547EDF4C6B1AA0E36E1EBB
-:100C5000C77F34C5BD02F545730E9BBE83F4667332
-:100C60003AEEC37C57F0039DCD0AF9892D741E75A9
-:100C7000E208BB0EE3FFAB045C528E6F348FC5A25B
-:100C8000FD7B2A5B82FDBE77E79DCD4EE8AFF14745
-:100C90009999680FE4B8CF25F17B29CCDA7A0DD782
-:100CA00083956F44D851DE0B703186FB9D7B4CB42D
-:100CB0004E8172DACFA87CC3B409EF895446C17A59
-:100CC00015C6CF7D33CC877CDCF866981EED46EFE9
-:100CD00074F77348CFDC377B8FC1F5A1B3C1A4672C
-:100CE000E4F7389F273DDB09BC37D25BC17C26E5A2
-:100CF000D35DC3E5A548F069B1903FB790A32B55EC
-:100D00005D480EAF3C0640E33EE963CAC05DE8279C
-:100D1000D82DF47E9394CB025C0F417941FF183AB1
-:100D2000FF2BFD8D60392C6BB352BFE56D7621EF43
-:100D300036CA4BB92B167263127EC62CC1E7BB5361
-:100D4000DCEF205E0AAA41EEA3681F3F0BE5C9CF86
-:100D500037462BF217F04D624980FC5437DECFD076
-:100D60003F31C5B9886F66411AE89FCC6EF74FAC2A
-:100D7000E31200FE892B327478DFA99D7FDBF9E650
-:100D8000E6F87F8F9097E2485F4FF4670D55610E4C
-:100D90003C877E398EEFF72C5CC5F1B8D0E0CA45B0
-:100DA000FF62E12F158A97A1DF817A69D8912A63C2
-:100DB000601CE5FEB641CC0E7898D2D683D23713AC
-:100DC000DC47110F456DD304BE067DA3FDC5A14EC2
-:100DD0001E4732784D8E8D19184772AB48E733693C
-:100DE000CCFA4CE07EDE7A1DC5C3E4BEA38C2B9901
-:100DF000F0BC7C801DFD425F9B4EEF3704C79972AB
-:100E0000B8DDBFB0D94076BFACF1CFC374507F2EF0
-:100E1000C3D905EDC9977A771BF2F5BCC9DE570D2A
-:100E2000909FFFE4CEA891763F3EEBF4BE9E6847CC
-:100E3000EB008F18EFAA5BA3E679B9BF13C1F7C91E
-:100E4000387F4B7E0EE6F3796DDD889FAE5499C8EE
-:100E50000E5D01BE65017648DA1DA9E7A5FD917C0E
-:100E60005DAEE7FAAB3C32DAEBC908B43B935C39D0
-:100E7000C8777DF8791ABFDDD9B47614CAC1A53810
-:100E80003AB728ED46B01CBCB6141CD35E1DED8EDF
-:100E9000D4EB52CF4BBB35FAE52F77FE15CD558AF3
-:100EA0007B4032E0EB6E3DB75F77EB2DC43F63E3F1
-:100EB00026E9916F6E5E8F1E137AF498468F5674F2
-:100EC00062070627DF9A1C7415EDF34CDC7F443D66
-:100ED0001FD8DFA329A3C7E03CC627733BFB5DC136
-:100EE000DD99FE1F9F7C6BFA7F58B288F7DD40FFCB
-:100EF000172673FD1FACEF9995BFA773694F5F2F3E
-:100F0000DA83A30CEC03DAC18608FB16610FC85E16
-:100F100084477BBFCE1E5C4D9B5988780A610F1EAB
-:100F20004AFE16F640F2A1941B2927522E82E5486C
-:100F3000CAC5849FC23A11E9F41EBF5750AEF76C80
-:100F4000A3FD467BC46094CF763F6E9742F2D6C134
-:100F50004E08F9F1CB8BD66E48B990F222E5A75C2A
-:100F6000C8C5EC20B9D8A7D63D330AF7CB92DD6BC4
-:100F700093E3FD7252B623D83E74CA57185964B32E
-:100F8000E3AA18F25539A4817C65EA441E9E49BE45
-:100F900035BF68D94DF2D36FFEFBFCF49B4EF8E9E8
-:100FA0007FBE0D3F75F4633FCEB2033C57B240DFC6
-:100FB00066F8F96DC23B8CFB0FDDF97A00D6970419
-:100FC0007793318DE23E13AEB32A8A2F0ABE947412
-:100FD00096FEC06C11773893E27A07E1C5F5C082BE
-:100FE0009BD37B4467535CB311D727B3210DF40324
-:100FF0003AF37F9B6F51EFBD7193743E96FC9DFB5E
-:101000008DC79243FB8DC7B1FC9BD2B5209789F861
-:10101000DE8F0B30DE38E1299167CB0A108FD34683
-:10102000C8FA9F3CE9EC81FA81C9B838C539DE536A
-:1010300045DEB3F4F018683FE119E68F9B43FDD815
-:10104000ECE8F6B888C2FCED95E71F3BBC86E8519A
-:10105000CBE5CCDDA2E7FB3F229F05794B407E44E8
-:10106000507E036F1FA56F6181E745909F94219C7F
-:10107000CEAE00FF0186DF7F05ED85556118D7A84C
-:101080008CDBF8D615D46BF50AED45B5E381D514A4
-:101090003853C5FBB9945F73D8093EC203BB78BE11
-:1010A0004F4AED931EBDE837E0DCBDA14E71D2B9C9
-:1010B00083118AB75B46477CF749D1DA27FCD16BAD
-:1010C000BF67781EEF56BE6FBFCFD68DBEF7996E45
-:1010D00061FCFBB2439F7FFE5E0AE7EF3159D121ED
-:1010E000EBC7A5A8BC1F1137A0F1A1684A5DE87B3A
-:1010F000B013C5B8CDB85F42F8DCF624E2B7D92802
-:10110000F1FDF293C8776319D3C4CF607CCADF9F27
-:10111000F272418D9E4FD71984AFAF9BEF8014A917
-:10112000BFFDF8F204D1CBF435F87684C0B75DFB8F
-:10113000BDEFEBE835ACC3F7826FE7483E766AF85F
-:101140003D5AEF22FE8C8E53ACE84757B8C2D6E02A
-:101150007AC12F9FBF27BE6C96FB031DE4EFB5023B
-:1011600094BF0A8947CFEB4FA2FCBA74EDEDB93CAE
-:10117000B6F33573F601BC52C80FBE7FE4F9FA2707
-:10118000312E097C41F594D707C01D2C8F7541F98C
-:10119000EC20F915F247FA03ED01E0A927EAB7B808
-:1011A00063467B009FFC4CD0E9A2B827DA3C9AFB4F
-:1011B00093CDDD78BA2385FB8FCF097C6E12ED9B32
-:1011C000C303F090AAE11F1FAE5B02E64D78BA3F61
-:1011D0004ECEFB93827CD063CD365EBF2DE5A32738
-:1011E0003DD9FE7C707FAFA67C528078F1F7FFF18D
-:1011F00061F423EE1778DB9172E4B02752D039C145
-:10120000FF4E21F007BD63518EFCA174E48F1F7661
-:10121000E44F4FD0F7F44E7767DF7B3A7EEF0CFA5E
-:101220009EE13DEA9BFF5ED02D3F88AE7941741D63
-:1012300013942F9479AF46FF4ABD5C5CFFF4E30939
-:101240007118DF54E838BF9F9F4F93BD996F95FC8D
-:101250007BE630F2AB9F9FCF129E27D709BA79CE9B
-:101260003D897A7812EAE151FEFC14D443943F5F41
-:1012700080FB617E7B7581EAEFAB91ED2F92FD7A69
-:101280006085ECEF33CA4B3A32CF25B277F70BBD0E
-:10129000C33CADA4F7E735F0EF3F7DFEF3C35F2B12
-:1012A0000FB54178D91094F704B55F7703FBB622E8
-:1012B000E8FBC782EAD704E5D707E56BB4DF17CDB3
-:1012C00052480E8B46F0FDC960B90CE68F2F52DAFA
-:1012D000E363EDF65C8924FF4E235713AA79FEFAE7
-:1012E000F3FF29A8890CC8A7B0891EB2EF305AC0F5
-:1012F000FD41D0B91E15F8C1D089DEBCD899DEEC0D
-:10130000136CEF79FD3FF0D724DA2FD2F825FB5488
-:101310006DBE51957047BDBB2832605F955926E27E
-:10132000BABAF3FD9B8889635203FC224FF84467E5
-:10133000C03C65FB715F5D5771BCF8D4F0899B714F
-:101340007F68B4D8D7B4F114ECA58AF6BA52C46F4A
-:10135000C6E1395D6C17EEEBB930D00F6275BD7028
-:101360009E8D3F52F9BB50D5401FC05311B3D37966
-:10137000D39978EABE3BD447472FF90D7CB7EF47A6
-:10138000EA12B4D34797C4D239A645A9DCEFDC17DB
-:10139000DD356136E41B231E267DDBF8C4584AF791
-:1013A000AACE95AD56E83A357962645FAC8F263C9B
-:1013B0003936C44F5C06FC9D996A2738DC366B428F
-:1013C0003DFADBAB0DB45F082D7E45FCF3A469301C
-:1013D000AEB78B96F5A7FDB0E29F4F1A87F7B08A9C
-:1013E0001F37D03E498BCE4A7122F7EAB1742E6A7C
-:1013F000D60A917AEEA2F4CDFFFCBA1AEF69B5BE17
-:10140000A0D0FB0E775CAD7B67109E9BACE94EF7DE
-:101410002EDE8075009EFB3EBEBEB717CF219F0813
-:10142000ABA273A4D09EEE8B955EB3BF3B310BDBBA
-:10143000ABD6E5D0FE1494A3FF7C6A95BA09EF41C0
-:10144000154559C2F1FCF6A9AF18C5754E3D6EA2FF
-:1014500077228E47BA67AC8FA3FBB8E8E9B3538A0B
-:101460003D4A013C4CDAD067626212969B047DFBD8
-:101470004415011E8A74EDFC43F6A42486E727A5D3
-:10148000F699B805E671EA97BDE97CD8C154E7E45E
-:1014900054C0D72FD29C5352E3115E6EB7DEFC0FBF
-:1014A000DF8FFCE385E204E4AF8752395FBFD1569A
-:1014B0009C10F8BE77C9453DF1C19B46FB227A27B7
-:1014C000303C4DC17536F0412CC6CD6789750BF0A7
-:1014D000F3929D21FCABE1A92AD1ABF1A7F1D94848
-:1014E0005F3F5F0F7F17F519AD37205FB121732D77
-:1014F000DAB993A625EC440FD67EFE91ED0B233C82
-:1015000019B68579C332307EEA1C87FCCD12EB7A9E
-:101510004DB604C8A168FF770F3FE7FB77688FEBF4
-:10152000BEBF7BFED712B89F21DB9746593CE85CD3
-:101530009CB658F4488FA3FAA5A7F03C5AC90B06ED
-:10154000B203252FC43FD68AFA07F806E36BC1F32E
-:10155000FA63AA81C7313A934BCF18AD5CB231130D
-:1015600071BE9DC965CD86DC899B233B97CB522BF1
-:10157000D74FE35EE0EF51960EB5E8717F73F40B41
-:101580006F6DA17B740BC286E0BD89D2174C44AF4E
-:10159000168BC563BD0DEF1358F431903E9BCAED19
-:1015A00069BD909F5C95E9CD4328A57B1272DFF061
-:1015B000EC92679EC5E397E79877DA70C0DF6527FE
-:1015C000E7D3CBBB548A3F06EF23961FDC69CC617F
-:1015D00037B18F7883FDC332D622DEDF0DFD7DF07B
-:1015E000FEE1ABA9C1FB8706BA4F5E2AF60F73373F
-:1015F000280477E9127ECF3F3796C78D4F2E05FA24
-:101600001B69DE1EEB103C0FCDED4E2953BC66F876
-:10161000F5AE0D0B288ED913F184716EF16EE2894F
-:1016200030473AAEF34B5E0823FC96FE6AEE5F7ECF
-:101630009985F7FA0AE202D7D5FB912F387E19DE99
-:101640001F94FD9C5EF6637AA731F745581FC37C53
-:101650004A63D8ABF76720BD92D2719F53B62B5D1A
-:10166000FEA35EBC1DACAF611D5DB44AE5EFC7ECE7
-:1016700036911D04594F6401F72C67AD38683472F8
-:101680003BC6128709FFDAEEBF9F761CEAF1EA6ECD
-:10169000A5B88726F127EF5115E9F8FB74853A853F
-:1016A000EE578126A37B499753B95F7B3A959F6795
-:1016B000284A77D0FD9CF2B526C7F20CDE4FFB7DA1
-:1016C0004F58DF95EB9A4B683FF3F7268AAB54AE41
-:1016D00008738645F1F3173B06D0F96ABD11F05146
-:1016E00066E7FAE2B2986FA57DD25D749F41CF8E16
-:1016F000E8A1BEDCC2F563790CE03D92338A6E1836
-:10170000BE67C7E8DC24F69B3428607C4594433FE1
-:10171000F6287FBF4D3A5683711B6CDF7710E2319C
-:1017200076DA7484EF1595E41990B47604FA7DAFF7
-:10173000A899B8DE2E5AB56F1CEADFF9DB07E38DF6
-:101740000956F4EA07643FE60BFAB7887367C59059
-:10175000C777B622D2B83CB9551E2F8A485334EF0A
-:1017600010C9FAF255061EBF073D8F8AA57CD9C75E
-:10177000D46FB9A53901F56FF96EC330D4D351696F
-:101780005C2E8B97A5651F01BE2A3644D3BB8365AB
-:101790009E0223E6CB6A15CAFBBF8B4F473E3DBF77
-:1017A000E2B528E49F1361BE9E68975A178439E812
-:1017B000DEA195C7EBCEAFE849F79566599B2DF8AA
-:1017C0009EC1AC45DD6DA8BF8F5A7D46AC3F5A9790
-:1017D000A1C3BCD36ACDC6BC537F1BE5CF8BF32D11
-:1017E000F4837CA5703A976DDB67C4BF4F3244CC5D
-:1017F000F7E22B1FF4C2F84F797A732FB42BC0078E
-:10180000BD5210CF2F2964972BB6F1F3EE920F2A19
-:10181000900F40EEE6093EA8D8F5DAF7511E2A905F
-:10182000FE433AF211F0F37E2ADFB1711CE3DFEFE1
-:10183000473E91760CF22B0C368CDFF17C661AA7B2
-:101840003F948FE1E59E01FC1C5DFB39048D1C7407
-:10185000465F571AB787C5CB4CA46F5D695C1E5AAB
-:1018600056ED8E42FA5D7C65DF01DC6729DF0156AB
-:10187000DA1E421E043E2A71FE51043FF9179538C4
-:10188000DF28FFFCDBF95EC86125E3F393F3ADD4F9
-:101890008BF9CB7AF1FD24C12F654CE06B576F2E8D
-:1018A0007742CE508EE9BD0E313FB74DFB0EE5F7C6
-:1018B000C5FCDC2265D6BA28C40FD217F50F3E103E
-:1018C0006994FA049A5CDCBE91CEF14B7A49F857E0
-:1018D000093840DF39636C7E3AB674F24E6495E0A5
-:1018E0009B638F7749AF07FC9DDF4ACF6C11BFEA3E
-:1018F00003C6937C23C7CB7D79D2DD386FE8DF87C1
-:10190000FDCB718F7A22F4D8CF51C6E543C22FE5C3
-:1019100032B7FAA1BB074761BB8B96EE0370DE9C22
-:101920008EABD2ACF4BD13FD05F8DE59AF50DCFA36
-:101930009858E71F7BFCB5A8E2017E7E7F427C279A
-:10194000F90C7F303E26E16DB2F1387030DC520F79
-:1019500049B8739FB8EF6E2C97F0E3BE51209F4AB1
-:101960003C4A7E95F7F582F996784EDA4FB573FECC
-:10197000AE4C3D46E7773A9407F727FCA213E25CAA
-:10198000796B3CE371FF1589FB35F78A188B0CB432
-:101990003FD28EC0CF1A7D80FD69BFA716E73C8B72
-:1019A00074BB90D68DFA3FC7EA8C39D06FD999E6CF
-:1019B00071F8CE9DF443EFB8EA53A3315EB58B9F27
-:1019C0007793FC5276613FC941B9B8FF54B4EA83BA
-:1019D00082E1C8EFBF35D0BE4ED1E3638DE8DFCFE3
-:1019E000DD327318A201EF41A05E3FBB796826BFCC
-:1019F00059604D9886F721363F33ED01289F55AF4A
-:101A0000D2BB0DD80FCA6FD1A399145F3D11D65226
-:101A1000300AFDF81FA856F4E36FDF32F4316C7F13
-:101A2000BBA56B0C3DB6B13996F24E7D34D907E9B2
-:101A3000F7CA7380D5E2DEC75F84DE3FDC9E2AE210
-:101A4000FC5F752FDC8F6FDD1846EFAC141AED7557
-:101A50003E1C6F4F175A67541AF1EA23DD5B25BF0E
-:101A60006C8E9199938650B93909CA0F1A9A1F45FD
-:101A70003B72F051CB607C3F92A9D78615737F9A59
-:101A8000EF3BC66ADF2D91707C24C60FEE4F7EDFE0
-:101A900084EB081BDD4FA4EFCFAEF8ED34B48367C1
-:101AA000B7F6B4E1BC4FEF09A3FB03A70DDA77CF7C
-:101AB0006EF5DE57F07D29796FF5749AD68F93FC19
-:101AC0007EC37B377FD39E83BCD1B9A50B4B19DD79
-:101AD000FB7E398DD1F76322BEDA89E7084B6A4D68
-:101AE00056BC077312F91EF7B376ABFCFEA599CB73
-:101AF000C1C9DD9974BFB7E46F3C5F52A778F13E6E
-:101B0000F2FEA79FA0F30AB3C1CFC4AB09EDFEF369
-:101B1000BAA7A7A1385C76B857E27DFECB5BF9F98E
-:101B20008A0EEF321CDC7920C9DEB9DFFC5DFBCB0D
-:101B3000320E119FAEBDCF2FF12CD74F6F023F8CCD
-:101B400018E2C7DB674BE790BF7C61A99BD24BCA09
-:101B5000B1B5B7231F5BA2E9BEC01FEB9F51F1BD1A
-:101B6000A8F25D83AFE13A78546434BD93F2D9D2E0
-:101B700025B48F7A616915A592DE320E77C7AE461D
-:101B8000FAEEB3FACC06BC9FFB4664B4B003B69041
-:101B900074EDECDEB19CD7B91F70FA4AB8CF6D9DD9
-:101BA0001985F36A7C3EB66124D23522DA8A7E5FDB
-:101BB000A93847726A3DF7ABCF98A37F930FF43DE6
-:101BC000B3614A02BE3737BBF1DE69585EB247B136
-:101BD000E27AC0B1675214AEDB3ED5B744E1FDA84E
-:101BE0004FD7CB7B555EFA3B54A3F2D8146C3FCA57
-:101BF000A767F60CBE758D7C32F2829EEEBF9E8783
-:101C0000728A935C0BA73809FCC4E2B991D9AFF38F
-:101C1000F84AFB3A57ACF36E17F37E34DD26F73102
-:101C2000A83C77042F3FBD61E744ECEFEC668315D9
-:101C3000E1FE6CB381FA9F07EB331DC07B662B5F1F
-:101C4000F7601ED7CB67B7F2F5CDBC3ABEBE295FB1
-:101C50006070F2FBA25A7ECC0D6847EFFB74F25E17
-:101C6000C83C279FDF3CB09738DF60BE8D6175743C
-:101C70008FEC9B9E170DE6DBF9925F857E68E7D7B8
-:101C8000CEF844E013E51DF955F2C3BCF57CDFDE68
-:101C900056373807F94EF247F03B59D546C6DF575D
-:101CA000D485D37BB89322ED06B40F53E25AC620F5
-:101CB0005A3E4EE77E809AAB73E2BD37566D0AF905
-:101CC000CECE8A74EE57457465C4EFDE742B3FCFD9
-:101CD00029EE7FC914269286767B5284ED0B3B3425
-:101CE000793AFDAE7BF4C0CF936EB73DDADDC1D853
-:101CF0002FD30BEED1C37C2665DA767783FCF3BF56
-:101D00009AC0F3B7D9861A20BF4C9978CF18C8D794
-:101D1000A73B9F4A0F18E7EC962E69383F28FF191A
-:101D200096D7C5BB7F8E69A5B80F7649691DB424C7
-:101D3000C3DFFEFD3D96A37FB4FBF32D0696EE18A0
-:101D40008079097FE8B425DDF9ABF4F88EE5C58C20
-:101D50003D4EE7F53CFC1E0EFCB8CC09784F8AF3EB
-:101D60005BB1BC975313742FC7C1EF9FC9FB52F2ED
-:101D70003E545FFF7DB20DB7729FEC9281FF1D2A2A
-:101D8000C5A9BD0FA634FC89DEF9A9F6B09630A22C
-:101D900083F69E4D39BE53771BDD0BA2FB874C6F3C
-:101DA000277D3357FA3B68AC87F9DF296089FCFC53
-:101DB000C1A3821F4F2F653D7A80E89F7FB739CA44
-:101DC0000E705C98E8EB85FA2032DCFD27C4D7E979
-:101DD0000DD5A90BE3F01EAAC9910FEDCF78F97DBF
-:101DE000CE32E1B7B2CDF1422FA8BE3BA15D534642
-:101DF000DF4D6887DE177C7521C397FE23D42B192E
-:101E00007C9D04EDE83C5DDEF2BBE2B1DD85ED4F8B
-:101E1000F4980D709B0006BCA7351EFA1C61A3F751
-:101E2000AA984AFBCF5EFE7E929E79A26CF8EED510
-:101E300033E9E23E11DD13947492F8EF4017181A5B
-:101E4000FD599D991910EEBE6C03FDFD2F491FF938
-:101E5000CEE2C2DD3CFE427724451EE348A7CDE238
-:101E6000EF9F75B08B6F91BF0A62E9D1E89F0D3388
-:101E700043DBC9111B8DD8F5776D2FFF9D2EFC928A
-:101E8000C16C70E03B92A5A2CD58B5D08EEF5B2D12
-:101E90008C37D37B250B5FE84EFCC196FC9005B6D2
-:101EA000631B62895F5666A884FFB9F58CDE1D2A24
-:101EB000A84FA6F394F9F5364AA3DA12A9FCEC6F01
-:101EC000DEC9E27A89D3A7E07FBA8CA6734BFFD331
-:101ED0009B52D6D97BA79166BACFBBF020B76B0BCC
-:101EE000A7CABFC7C2EFAFBB0438AEC81A8A0BB9C6
-:101EF0003ADC53E7EF57BAF0BE007EE734507D6717
-:101F0000EF574AFC9A04DD82DFB39C7A303391DECE
-:101F10007F14EF594E17ED9AC5BDB3CEDEB5BC4F59
-:101F2000B47B226A5C13F2DD746769C8772DF59E75
-:101F30003007FACF86D4487A47E13E37F8979AF5CA
-:101F40004C8B1EF1302D9BBF733975BAB6DE90FDF8
-:101F500039E97343768777920CA88F4D2E6DFBEC91
-:101F6000AEC20EF5657DBFF65DD15423D94F3DBE9F
-:101F70003B0BF969E25D51F40FD1FFBFECB410FFE8
-:101F80009BC43BB8CD2C2B11F5C2ADBE27FBFFDBAC
-:101F9000FBB1C1EFC406BF03DB7FEB424D7E60DDCA
-:101FA0000F35ED6FAB5FAEA91FEC5BADA9CF6CFA3F
-:101FB00099263FB4F9394DFBE1473669EA47B6BC8B
-:101FC000A4A9BFFDCC0E4DFE8ED63F68DADFD9B690
-:101FD0005793CF61EF68DAE79A3FD0E4C75AFF57CB
-:101FE000D3FEAEC4139AFAF1F6F39AFA097DAE68FD
-:101FF000F2058E2F35ED3F37BA577745BF22EA0CF1
-:10200000F1AD3A4361F844F9E5A62966D4076BBA05
-:102010000A7D24F86FB9B0D3AC07A37BAC63D56C51
-:102020001FF15F3DFFBBA0C1764F7FDEE5C4F81F07
-:102030007B8DDF6B8B067F521F307E8CD3CC02FFF3
-:10204000EE5D6C9E55938F77256ADA77996ED7D4BB
-:1020500027B9FB68EA53E63834F9B4AA119AF65D59
-:10206000973835F90C4F9EA67DF71A9726DFB37681
-:10207000BAA67DEFF56E4D7D5FEF1C4D7DFFAD5532
-:102080009AFCC0BA259AF6B7D57B34F5837D359A8C
-:10209000FACCA65A4D7E68F37A4DFBE147BC9AFA1A
-:1020A000912D5B35F5B79FA9D3E4EF68ADD7B4BFE9
-:1020B000B3CDA7C9E7B0839AF6B9E6F735F9B1D63B
-:1020C0004F34EDEF4A3CA6A91F6F3FABA9977ECED8
-:1020D000843E9F6BCB85DF53E0F897E6FBF6F76E07
-:1020E0007728741FEA5CD76EF27DC5963015FD2403
-:1020F00017C5996C781011F515DE27B7F1F33985FE
-:1021000014AF8A237F884C941DCF0B81DF1085ABE1
-:10211000B68C0CF4AB23FCFE5BEAF5CC9BF7DFDA64
-:1021200084FFDCD5EEBE88F231AF6EFB387A9F9823
-:102130007956221CF2FDBF7783DE6D95E978F3199D
-:10214000A60FF0170F86D5A60EF99A38C178F305B9
-:1021500086EFC1B6F72BE222F8C7BD1706F4BF160B
-:10216000D617F8F7236B979AE96FC7FF6CA995F21A
-:10217000EB962652FEFF003A29BF47008000000080
-:102180001F8B08000000000000FFED7D0B78544518
-:102190009670DDEEDB8F249DD07975779EDC3C490F
-:1021A00048089DF0D8003E3A216040C0E635044919
-:1021B000A4C1A84143BA81F84F7475BB311002B273
-:1021C000B391D11095C1860164199D092EA3D1093F
-:1021D0009AF09AE03A4C601CC5D91937A0A3E28E58
-:1021E000101EE3CFEE8FC37FCEA97B93BE9D0E382A
-:1021F000FE3AFFF73FFAFBB4385575AB4E559D7369
-:10220000EA3CAA2AAD5E898922636DDE1C4A9FF3EF
-:10221000DA9998C9D8366F31C1DBBD0E82FDDE7206
-:102220004A777A9D94BFCB5B41F01EAF8BD2BDDE67
-:102230001A4AF7793D54FE92B781E09F7A7D94B6B1
-:102240007B9B29FF156F0BC107BC6D04BFEAF553DB
-:10225000DAE1DD4BE91BDE762AEFF47610FCA6B757
-:102260008BE02E6F0FC187BCBD041FF19E26F8982E
-:10227000B78FD21EEF6794BEEDEDA7F277BC57097A
-:10228000BE8EBFDB19FC2ACD9FE431263097E67A5B
-:102290001EC2CCC92632F600FE4B82FFE24688CC35
-:1022A000C2D8FD8CFF3ED7B09A76139477FEF23FEA
-:1022B0008502C674A58C8D1F0F6962F6CEC634C622
-:1022C00026B075E64F7218D34057D76307FB094E07
-:1022D000191319D6C3DF752DFEDFC7583CFCBF9418
-:1022E000E5784C836953091442FBBE55827F771A07
-:1022F00055D7203EAB8D1CBF695A1395573E2CF81D
-:102300000D02635522F3E98B18FB7D5854011BC164
-:10231000D8258F2E47C47221DC0E8304F88F3A44EF
-:102320000E7E5D2C8EB1A59D861D9BD206F1AA84E2
-:10233000EF35F0FD2B561A0CAB643D3AC403F21D89
-:10234000DA18C69EB7B8A64B90FF608AC6A787F674
-:1023500099C99FED8C64EC2D8B6B06E65FF2DC7700
-:102360000C1B7FC06CCFC67E661BBAE21741FFFD17
-:10237000C7B5F69DD2F0F3E16E29676CDC0DCADFBC
-:102380003C97EC023CCAFFA275E1FC9FD04556F891
-:10239000F3012F49E0784A1A553ADBEA5A82F87C71
-:1023A00019E9B9470353F8E56DABF6AC812155AE99
-:1023B000CA1AE182EFEE822563198CCD65928E41B7
-:1023C000F97CE6389A064D2D642E8217311FA56FD1
-:1023D000C5BBAAB19DC5CC4FB06BB22135D4B88274
-:1023E000F172CB78B9657C94F471ABAB8EE3E520E8
-:1023F000BC4E4CBA231BC7A5E0F59655A27A73587C
-:10240000FF76C4EFCB83173F113286D2C7774017D0
-:1024100026681EEB313DAC73A38ED1F78D8F087EFD
-:10242000A46B852E2A9991B7FB18E40B817402F4F2
-:102430005184FCD29F3A3792E8E449091A7C7092A1
-:10244000D6A71F0BE3D4F8B3052DD1875E00FC1E81
-:102450008803FA481F9E0EEA9A210DE01FA0AF677D
-:10246000B0BDF3AFFF5D0ECE97FBCD4912CE57A3A3
-:1024700006D601E8D8F7B6D6BE5B92991460ED9403
-:10248000317EA46B26DAED73C7E07AB1A54EA8DFE2
-:10249000AD650DFBF387F6FB2AAE17B47FC2A62B02
-:1024A000F753BB9CCF95F29FE2FAC563CAEBAD5ED2
-:1024B000F569AD16F03F71E89C5E1A13621C0D6F52
-:1024C000E76606E0EFEE3833DD6142E4FAF2E74515
-:1024D0000EE69F94E944A11FAD3ED2B5C314881700
-:1024E000EF17E8F9E74437D140CF1944CF9FF8E020
-:1024F000D3390669C42248FB606ABA2075BD60D62C
-:1025000023DD2C67764AAB9993D20760F9917E9DC3
-:10251000BEA7F438EF0FB276CAAF2BBED782F47CD9
-:10252000BFC6958A702DEBA57C37EB2FB3C1FC2D70
-:102530006C5E7BD40658CF6F796A5A02CCEF3CFFB1
-:10254000B2A398CEDD257CE293883F7A10AF3EC1DE
-:10255000B33E11FABFFBA592F549903F47CBD78513
-:10256000FD2B5F17457E048F1BF8A1978FCB41E3AE
-:10257000D24695ABF8A1F209E610A09DFE8306FFB6
-:10258000CEB400FE287EE8DF93508E89FDF7E07A16
-:10259000BBDF34C4E07A3F08E21BC72938186B80E0
-:1025A000FE90D62A63882A88DE1F62E176ACF7B9EE
-:1025B0004CDF9FA730A2EFCF05E66040BF1774A69F
-:1025C0006601E55AAACB5604F8AC60BE2606E56E55
-:1025D000CD4B05384F2325D7A744D71FB53715A6B0
-:1025E000A1FCF7A70A28FFF719EC8D69AAFD845D05
-:1025F0008F4021E361389F3FC076C70EC54B283E10
-:10260000F69F421463063DF3198B88BFD944E4EB6F
-:10261000443DF157234E6D06F6E3943CA6A1ED9F91
-:1026200090F1EDF94A4B74EF83F1EC1642F5C3F7E4
-:102630002B43F8603F243F2C8CFAD1A7713E56FA09
-:1026400063A6BE6427D0756A844B978682C116C77D
-:10265000E58B99CB979EB44F33717DE64CDEA8C8CD
-:10266000656A8FDDC6E5D1099DE443F844499A1DAA
-:1026700024D7809CBDABF897A7118FBB8CA62E2DBD
-:10268000A4EC16DD9FFA947D307D70FFBD4BD97FA1
-:102690006FE1FBEF1C99B5EF12BBBAF17BC6EC3AC8
-:1026A000C42F97FD5E998F6DB8DF2AF271C87E0B3B
-:1026B00003EBC5F913252B8374B5C0C7BF3A25DCDE
-:1026C0008F7CC436E7D2F8F4B2FC0CFEDE5AC15857
-:1026D000A651C613FE4B70195966CE209C54635602
-:1026E000C1291E9BAAFEC80649559EE6CB51956797
-:1026F00034DB5570564BB1AAFEA836870ACEF59743
-:10270000ABEAE7ED75AAE031ED15AAFA633B5CAAE6
-:10271000F2C2AE1A55F9B81E8F0A9ED0DBA0AAFFEE
-:1027200077A77DAAF2497DCDAAF2299FB5A8E05BE3
-:10273000FBDB54F56FBFEA579597B07F56954F3541
-:10274000EE57C1D3CCAFABEABF80FB16F0CF1DB6BE
-:102750006E55FE0CE9B8EABB3B734EAAE017E47570
-:10276000F62D0E27BE682DE7FBD16CFB07AA765825
-:10277000E768BEFE613C6F7BCF1F0B514E6ED7F4F6
-:10278000A721DD4A5A7322F27166F1DC4340662CC0
-:10279000DBB1AA14C55B4EF95387301DEDDC5F8AAF
-:1027A0006C925F71F210A605AE8BA5D01CB3D74416
-:1027B0001FC6B4C85338D58AA834CC3D8CE944DF51
-:1027C000AAA928575F785C3F1AF9282A46A14F0723
-:1027D000D1677D8286F8B97EB1C98FF2C732C52430
-:1027E000329013961F5AD6B1024C8B9A316DF61A5D
-:1027F000995F0FFA809751BAC96B66FE6C2067AF7C
-:102800008DE0FA93F795A7433B23AB4433AA99E6AF
-:10281000518F2548D0BEF5E5969C5D76C6D6EDB0C5
-:10282000CFD7E542FF199EC53BA2014E638E05300E
-:102830007F1698233699B1253BDF76FAF287C29747
-:10284000339D4D2417C4F65CD4FF947637967E6E84
-:10285000D79821DFF74BE71198F7ADF1E1F41DC2EE
-:1028600025995FA75D470BB60BF99EF6107CFC4CD3
-:102870001ADF7F97A4737D0A8784EB66E5CBC6AC2D
-:10288000A0A78C80B9DC3AA9E10CEAF0A2D927A074
-:102890007C62D7E07B902B89582983E0DBC3014E13
-:1028A0004058626C7F96EBC7D8AFD5C5D8D900FA2F
-:1028B00049A851C35B619ECF660EE2A35BAAF18972
-:1028C0003006DD8F9D763BF4B3AD0AC60BF0563D66
-:1028D000D737947AA3348CF6F72FD3F87ECEAECDCB
-:1028E000B7A39EF4A53C9EE7BCFD8B3ECE447BEB9C
-:1028F0002AA589351EC105F2CD5AE9B4FBA09EAECA
-:1029000011E62384DEF28B3491BED71D7E4490A065
-:10291000DEA76912C189957E1A77520DB41B80BF5C
-:102920004DF40966C8B73DE613103F9BD96967F0BF
-:102930001D335A88FED7C83C616BF8CBA28F410F7C
-:10294000D3799D76ACA7BB13E8331F27D46366B851
-:102950004EC9E347B010EBA3A4863E0D73DC409F45
-:102960008F4A7DD443FBC5DD26290BE8FB85C5A630
-:102970008A1D21DAFB549E9F0D31EAFE2D5A3E1F1F
-:102980008ADCBE6CE6EBA8F0F19A68A692E36B5283
-:10299000C65B6F84AFB5CDC85C01F86E857ECCD0C8
-:1029A000BEE1AB55661C3FE8D04EEA4FE4F264C787
-:1029B0008F72C86E0A5EC721F408943FA208E9A38B
-:1029C000CFDF087C68A8D2DB516FB2FE4393807BD7
-:1029D00073226B1150BE5853CA7A44DCD74457AEA9
-:1029E00033843E7933BA54D64FD99F83D74B773D42
-:1029F000E3FD129CEF7FD531D4C7561F8F8F710531
-:102A0000D0534C3AA7CB62D6A245FE98CCDA29BD6A
-:102A100085F5527A1BEBA7D4C1CC22A6A5CC4E6972
-:102A20001973523A9D79282D672D94CE64ED94CE7A
-:102A300062BD94823D43A99399C9EE9A07FB37A6DC
-:102A40000B9893D2EF310FA599E99C7E2B580BC1BF
-:102A500077B3764A3B80EF243DFA018C9476829CD2
-:102A6000C3F44D9073987679252665A31F2087D2ED
-:102A7000235E3BA5C7BCC594F6781D54EF6D6F3936
-:102A8000A5EF789D949EF05650DAEB7551BD53DE5C
-:102A90001A4ADFF57A287DCFDB40E969AF8FD2DFB4
-:102AA000799B291DA5077EC6F9CDE92B447D3EF50E
-:102AB00023BD4302F9EC91E5D26187E699DCF1B8D8
-:102AC0006E1A66403A285B2320FD5973340E3FA4EA
-:102AD0009B72560BF742BAE104D7DF0CD648D20FEF
-:102AE000AD6DF58204ED76087DDA0858CBE9E9A9E9
-:102AF000738D209F4B3AD9BA083BC2194F1981EE0A
-:102B000076E83CFD3BA0BC64A734D7087BD6E4C87C
-:102B100053FFB18FC3543EE9086B34033C2B3DFB9C
-:102B2000A93881E381C2EF7B3B73E6AECD443C25FF
-:102B3000C2F3C534302C51BF7EC444FA7561DBD971
-:102B4000420DC0931A4C45681706D4EB42BA1FAE2B
-:102B50005E70B9F2DDB65596469C870D9F805A0E81
-:102B600059A9197D85ABF3D5ED6ABE5EFF4C7B8319
-:102B7000FE03EB0937686F7F96A3327DC2FF7E3A72
-:102B80000FA66FDDF58FF66BC80F648EC1FD74570D
-:102B9000349733FDA09FEE04BC77C5C8F0C64C1A2D
-:102BA00017CA435CB70D9BD2FD3E80778539571F0E
-:102BB000C7F27FD4D87742D1AE70D7A65C8233C932
-:102BC0003FB121C69313938FFA3CDF975A931F0DA1
-:102BD0009302F8BF399DCBAFADB75CE9DD81764498
-:102BE000B38665C1773B9B976FCC81767EBC19F429
-:102BF000078047DC5ABD310BCAD3376A266A65198C
-:102C00008778FC7873F59E4DA85F258F8EC98676F0
-:102C1000336479991ADB57B806E8BC55AFB6A79567
-:102C2000F49F647EA98666CE826C4D95EDF41D3AC4
-:102C30005611B8DFFD4CC6EF57593CD5DDCEFD57D8
-:102C40008691E1FE2760FC2523B9BFC3B2CE48FEC2
-:102C50000E4BF27F9DBC03CA2DDB347654E9446BE6
-:102C6000ED5A1DEAFB8B593BF2E30E817FEF4BE1FE
-:102C70007A21280AE97303ECF2ADDED38B3203FC30
-:102C800084B60A9F80F67BC9C85AA10FF79FE40754
-:102C900005B4FB2D152EC11589F68187CACF65B9FC
-:102CA0007E920EF8D92AE1FB40FD92B912705DA127
-:102CB000DF8A76D2F35851607FA7B3F83CAC073B6C
-:102CC00099F4D5757AC22B78BE4E65971EC0F695DD
-:102CD000750C2EFF7E06B7AB773D015D201F4CE2E1
-:102CE00076F389DD89A43FCE690D77A0FD74E2A952
-:102CF000D165046F99EC403DF2C4EEC9D3319DB368
-:102D00006526D53B21B01EB487E76CB95BC4FCD403
-:102D10000CC00BDB3BA3277A9CB3E541F9FB47CB07
-:102D2000B0BC58E3FB09DA91C58DFB22D04E9E1C46
-:102D3000F94A12A627347DF5DDD0FF5D66F62BDC5F
-:102D40009E9D1BE3FEB11CFE31F7A9741DEAD7BF9F
-:102D50004B4FA7F59CCF1CC4075083ECBA5BF6F62B
-:102D60001E064D8ADDD6DE3F15CC5CE6E8301FC17D
-:102D7000B4B4CB5E86D357D6E33C82E9F45E4F19F8
-:102D8000AA2FE5A75B8E60BA24D7F53B9C9F17FF5F
-:102D9000E17BAFBC08F0C8C7EBCDA807653ED137D3
-:102DA0006327F9EB740CF9216B92A7458B046C74C3
-:102DB000C6A07C78F6695183FBB921AD250C61C3AF
-:102DC0007DE91AB40B7745B7D4D0B8B3C219CEE3B6
-:102DD000DBB00F215D64453B63909F802F691D3EF2
-:102DE00093E9D310ED3147637E18CF1FA817CEE1CA
-:102DF000F303F55AC204EA274620FB13D406DCBFCE
-:102E00006DF2FEDDC63C09381FD648CF0EF4EB64E8
-:102E10009570FE67919C2EB07AD344FA849CCD962F
-:102E200016CF9DB80E5697E8EB0BA43BD80607F4D7
-:102E300091748219DAD75B050E839C21BCF0877EE2
-:102E40000C8BC9427A8D82BFB502DA0BD033701C6D
-:102E5000F34C83DF2974179BC1C73542A6BFAC650D
-:102E6000BC3D05DFB80C2E9F016F4983F868657C77
-:102E7000601C9A007C02EAD1F806F066761BD20547
-:102E8000487A81A74C1203C75FAD7184A15D647A53
-:102E9000F5FBE84F8942390278FE53F72423F269A3
-:102EA000F0387232D208DF46D087516F9FE9E2FCDA
-:102EB000DB58E911C83E4218C79F2C3AD01F68352D
-:102EC000AD167401E3B526F37D7A66A5A71BE5CAA6
-:102ED000CCE2083BD2F79DAC7D9D99F3F7914CC0B5
-:102EE0006F141BF899D8C441BDF0474FBF7B1297B0
-:102EF0003499B597E4E2FEF9F8FDB370FDB63E3AB9
-:102F0000B307F14FCC79AA3B061A745E94D77D19AA
-:102F1000F7EBA46C133F0E1C479207E040BF448DB3
-:102F2000BA1CE841052B7465131AA271BFD144E4A1
-:102F3000CF9C817A4A9486E43BC829614148FD339D
-:102F400088AEE4F957D6E7AE8C4C5A37AB89AF035D
-:102F5000EBB71B1746CA8355D609FA6D04361F0115
-:102F600074DF58A6F50B68D762FD28ACCFE29D91BF
-:102F700043D769874E9A3903E5F4C31AF36E367462
-:102F80005E81DC7E4B7AEDC371540EF9A291FC7D1B
-:102F900001F86A43C1EAF5B859FD6DAC6BEE8CB42B
-:102FA000A1F989C90B66E23E9B58CB68FD83CB47EC
-:102FB0003DA65E57B237C7A3FF88F9BBBEC17ACE24
-:102FC0004CDE5586FA7CF0BA2A74971A1B7A5F1089
-:102FD00033395FA646D84F95935E21929EE04C11FF
-:102FE000E303EDA20D197C1FBAFD3513ED43EC236D
-:102FF000A31FB75C7B57EF93B9B00EA5573468AEEB
-:10300000B0A3EF1CFAE14C48A7FDEADDD5FF0AF5B5
-:10301000A67D651A87F96FB0BE19E810F1F5809D9D
-:1030200001F0DA2FF6B4A0A3A4B192D971DF55FA5A
-:10303000D923F7F30B9DDF49F23557643B490E82E4
-:10304000651E402F0069897E78197356B690DD6839
-:10305000CDCC07598D6EBDF625B45FFE49CFD0EFBC
-:1030600038AF42D295C0F8E7554ABA65E8C7175954
-:1030700039EA11F32BEC943FBFD2CEF38D3C7F4164
-:103080008583F217543A78BE09F2613E1656F87BF2
-:10309000BDD0EE42538CA4413F78A593975F355045
-:1030A000F93B600F6402C98787F949DEB77CA6E166
-:1030B000F1124FB85F005C0D91453D12CEDF7D1AD5
-:1030C0007B162486149199017EB6C2E9D742F9F3A2
-:1030D000CC9F8013F946F56A6736E4BF912C9A714C
-:1030E0007C6F38C06EC6F9AB1569DEE907F01B3599
-:1030F000C914CFD821FBAD7D2B8CE467055D87FC1F
-:10310000AC6C45A2ACC7F0F26DCBCD7ED4C7400EFF
-:10311000D23AF6DF27921E00F2F0ED1CD48B5ECA85
-:10312000B4874948B76A7EB3542F2FA1F62A99195C
-:10313000EDF25995BCBDC697347E0DEA55A679339C
-:10314000910E1AF7323BDAAFCF569F2A8B45789B08
-:10315000DDCEE5875A2E34566F392EE1783C1A734E
-:1031600016D5E77EAD464FE92EAD30C8CFB4DED2DE
-:10317000A0FC182A6FEC3DD84E4255A97D13D4B35C
-:10318000C038D18FBD4DCFF37DF7881467B0548B15
-:103190005DE68241FE4E91A7D0827C1845F245C57E
-:1031A0005FA35F52C33F92F914F85DC471F97631A1
-:1031B0003BC9955DEA7A20273528AF52DAD4F96702
-:1031C000B204C52FA59A87E079B67AB8DC0B1EE762
-:1031D000E0B8BAC246D1B8347C5C28D7203FD77457
-:1031E00088F2732B45BB24A1BC6B3F85E31FF5928E
-:1031F000C8BA009E555D3413E969D6660DB94366B9
-:10320000B35E920B371BB7E2DF081E67F0F8366437
-:103210006869DF1CD007D71B491F6C7DC4A4C1B8E7
-:1032200022E85BE1E8573897551A9E09F33022539C
-:10323000D6D7AF6BB93C6934119DEAAC8FE504FA7F
-:103240001F84D1A523B0BEEE7AECBC728A1BE9685C
-:10325000DCC172AC58966393FA607C2AFF73389392
-:1032600002E6F7D6FE18157CFBD54455FD12102E4C
-:1032700081E5538D79AAF269E6712AF80EDB1455BF
-:10328000FD19D254157C67CE9DAAFAB3EDF355F023
-:103290005DC54B54F5E73AEE5595CF2F7F4855BEA7
-:1032A000D0B946052FAAF87B55FDC5AE4655F99213
-:1032B0009A2755E5C1F693929666723FCF569BE7E3
-:1032C000A483E48B4B70460EAD67A914FB03D73D76
-:1032D0002A82EB53C1F51AE5F57841E0FDB1FE48CD
-:1032E0000DF29DE27F63ED912AFF5CD7E4C9C63EF3
-:1032F00013FA72ECEF23DDB213DC1FC5FCFC3BC5F7
-:103300007FD5FD04D483F65647A65B71BF43BFABA0
-:103310004B0FFDF935E4BFB736D70BB40F6EAEE7F0
-:103320007E95AB7AE68A0DC08385F37EE5788E8242
-:1033300027734470FF6018CFDF26FB959E43BF5272
-:1033400036633FB0287E7817B59B50ACF7A17F4617
-:10335000A8F6087A945B2E66364828079753FF979D
-:103360002BEC2358887956D256AF8D39A07D5BBDA2
-:103370006FAD1EC656973969CBB3D0BCCDC3C81F3D
-:10338000F368E6942D6B81E7FF2153A2754910F98C
-:103390003C3F5FF7C6B93DD05F6B95A508E56A7005
-:1033A0007992BBF3E2B11B943FBFF2D50FEEBFD1D0
-:1033B000F7751D679A02CA87F58B56243247001DA0
-:1033C0004886D07EF91FC874E59EAC273FD6335A95
-:1033D000D793C8CF1726FFD7C4BDF0DD79E9CA3D22
-:1033E000A8A743FE0F301FEAD1BC9ECFBC44E729FB
-:1033F00052F340BF47FD3B2C34DD1E94DB17AD95E7
-:10340000FDE8075A1DA997D0CE4F327E467EEA0EC0
-:103410001DB7AB83EDF7E707ECED76B2BFF7CBED69
-:10342000EC9653AD997FCF8C3E265AE4F84088F94C
-:10343000D046B50928AF12ABC54F02F9A23B524F97
-:103440007E048B49F63B986A547E01C56FD01D7986
-:10345000BF80746FE95A417E7AF417607B07E57587
-:1034600009F6172419FFB4E8E3D81BB5CF06F223F9
-:103470008410FD04E1A1F82782FBF1A33E81FBCC7F
-:10348000CA70D22782C77D39B3E450663CF248FF48
-:10349000C93B507E9FD2D17E381CBD8449E1CC1FF0
-:1034A000D07E6F26B7EF23726254F991F644E60F8F
-:1034B000F45FB364F32711320C5BCC487DDFC65157
-:1034C000D8DFDBBCBF133ABB8DF441D8F6D0FE7B0E
-:1034D0004FE6E7EE5C4669AB6C97B7011F63FA9C59
-:1034E000D74CFAD936E03F84B77B254AFDDE1C4A2B
-:1034F000777AED54BECB5B4CF01EAF83E0BDDE723D
-:103500004AF7799D94FF92B782E09F7A5D94B67BEB
-:103510006B28FF15AF87E003DE06825F457D5044D0
-:103520003F7533A56F785BA8BCD3DB46F09B5E3F4D
-:10353000A55DDEBD947FC8DB4EF0116F07C1C7BC2F
-:103540005D04F7787B287DDBDB4BF9EF784F13DCEC
-:103550002B8F93B1E65E2FFA2B5CA284FADDB3AE1B
-:103560006A33EAD7B6651A338AF336976605FA39AD
-:10357000B655F2789F6D9586FC40A087FA519FB3AF
-:103580002D7BFAF8342A5F40E55BB149304AACAB99
-:10359000B8FECA56EAA99E150F02C177DB6A2BFD59
-:1035A0005A805BB2C3A9DCBA4A24BBED798D273AB5
-:1035B0009BEB5D24BFAD3AAE3F28741021FBE9229E
-:1035C000B2444A976573FCA33242EF2319594AFC6F
-:1035D000A4B907C767AB82F121BE55F5468C5F5A87
-:1035E000EF83F149A43FAE3A047824C378117FC039
-:1035F00087FCC26C19D797AD55EB08AFE465F3941F
-:10360000786734DAE96D9EFAB9846FA5487ECD36C5
-:10361000D7A1E8FB504ECAE77CACF1E14E7FFE50EB
-:103620007C3282F0DFC6B8DD900CFAD2FE10E300E7
-:103630008B47A9C7FD788F1943FAF126CB7A62B27E
-:10364000C0F98F3D2C12FF6D67A0F7C177CF817E47
-:10365000E7433950BA6F15FAAB1ECD724DCC023C20
-:103660007E248D3F24021C53CEDB4FAF17F7A01EE4
-:103670000DEB7DAE09F2373EB8D989B671EC6669BB
-:103680002DB25BDBB25713D0FF952CA8D74749CB9F
-:10369000653CB63B787BCFD58BE44FB6AE3A90769F
-:1036A00084F75B86FD268EFA7D18BA613216481AB9
-:1036B0001419C955E245EC2FECA1CDE5D85FFC66A5
-:1036C00087D25F21F6F775E769E4E365565708BCD2
-:1036D0008693273793238BB322E3488E24B1249417
-:1036E00023CFEBB8DCF29DE4FA241D869934B41F95
-:1036F000257EAEC4D383E3E835323D241942C76149
-:10370000570DE8FD3EAAB7DDB1C949E74B303E0B86
-:1037100045AB756C05AEF3EA9270F3DA10F4A0A431
-:103720005B508E01DFDF8B4623B5B3B99CB7A3E1B5
-:10373000EDDCCA56115C6232FB42C86B257D5A6EC5
-:10374000E7812C4EB7490FBEB4F118AEEFDB3A3A21
-:1037500013F49CC6BF11ED04DF092DC9D7446DFBDE
-:103760008E3D017835CBE3794EEFCFB523FF407B1B
-:10377000F92857915FF2C97FC16605CCBBF2DD5ACB
-:10378000D98FFDA36B1BA229BE5CB52E0CF5A33609
-:1037900066247AB0EA3CD18501F46045BA0C411F39
-:1037A000FBB2F44A3CD5543211E3327C5F9E8A72FC
-:1037B00009F03E581D45FBE1D465EFDE3916E05BAC
-:1037C000AE8876D4CB9EABE5E71327FD5143E726C1
-:1037D000DE7C9CDB7DB7FDB7B21EF47B27C8E9B366
-:1037E00068E7417A4B33B377C1BADC526D22FFCD23
-:1037F000AD57C5B381761AB9A4C7A37DC1FD3553B2
-:10380000FAA13C80FE267DA6AE0F33AA453D23A13A
-:103810004F9D6FAB3A70661AF4D356CB3F6EBBF632
-:10382000FE71847DF51AF29300F529F49340FE4D64
-:10383000D19780E716371A19C973EB32A319E541FE
-:10384000B7259CE45FDB6213E9A11B325787A19E79
-:103850006CA8AA8FC674A4DEB7037DA7DDBBFF7D6D
-:103860009E2D81E42D3F7F8184590CFAC0BD7AAE34
-:10387000E4F8FAB64CCB4479A9A1F2C3BBFF7D8B27
-:103880000F7D07AC85F090342C910F7E00BE9BE23B
-:10389000D402DF2F40674E44F874AEAB07E54342D5
-:1038A0009CAF1B8BB69ACE56D2F9E2CA38E2335D92
-:1038B000B587E931BFB2C818C8E70A9FFCB5FCFF5D
-:1038C000B41CE7BB991CB859BB37E3F79FA573BE7F
-:1038D00019CE9E360C234F15FB18CF9A638A6C4B7A
-:1038E000FBEA597D48FDEAF66CCE67C57A7E3E64F8
-:1038F0004EC5F4728AC3F8FA443CC79693CDF9A931
-:10390000CD124971E2B674D6857103DF720DF7F7F7
-:10391000C4F1FFDA2AD3C93FD42A78A27D19783EB0
-:10392000C29586EBD706731409FDB7A672B9CEFC13
-:103930001E33C6ABA19D9A40FCC1DEF3A9E9989164
-:103940003E4CFE0B2DF19EA40FF0B7A35F1CFD179C
-:10395000C1DFDDDAAF866FBFAA864B984E054F35C3
-:10396000AAE16966356CC9E67AFA1D3675FE0C491E
-:103970000D27A71C09D3F073EDA6017FB344F0BB5C
-:1039800099017EA00D9A7601E725A5AF96FCB2AD10
-:10399000A9DCDF935CAFF67324B296B53102F96D02
-:1039A00054F9B6FC5502FA736CD5EA7C9807158C6D
-:1039B000CB8AF4BF24D7959F8D71E9027EEE3A4BF6
-:1039C000EBE9CDC575688B233E4A93CF050DDD1F0E
-:1039D000B7D0B89576900F7C01E345FA0F842FE6B7
-:1039E000BA2667C7733EF005EE97F97D3AE403A562
-:1039F000BFE1F841E1C762396EA29CABB922B7A51D
-:103A00009CABA997CFC775049DC7B9925C46E78167
-:103A1000AEF4AE090FC577C867BE6CCE77986E94CA
-:103A2000CFD720DFF9F49CEF30DFF0D52A6728FDEF
-:103A3000F0BCBCAF3CB437CCFC71C0F856B647AB59
-:103A40006077478239F0BCD343F80F74BA37333A02
-:103A5000475A2B0FE78B33BFDBD308E95B5A970B31
-:103A6000D76765D6593D8F33F5EB51FE9E97F7DF4B
-:103A70000D82DD385AC094DBA58D66BB11FDBDCC2F
-:103A80009FA1F257287E87D52BD2AC3180FF8801C9
-:103A90003F82D34CE74DE333C98F1135D571372BB6
-:103AA000043CF7CC986F04A2DC854E5590C78F6517
-:103AB00097FDD0973C385E03FAAB02CE2319440F32
-:103AC00023B97335954901E7CA5B65FFC5001F9BA4
-:103AD0009697607F3FCC96783C8679D672FF9FDAC6
-:103AE0005F66B86A53B533D87EB2AADF56D92F7253
-:103AF000F3F6D5FE37C3D5F461DACF0E6ADF1CB218
-:103B0000FDC176D57EBCAF111F6F433E18CEFFB509
-:103B10005F96A71B6C9E5EF47FE918D89514070684
-:103B2000FA98886A23FF69C3F979535DB2DA0FA660
-:103B3000637E921FCF47D690FC48603E8ADF59983B
-:103B400087F2D7474DE7F1BB60B9711379C1988708
-:103B5000A1DE00FDA9F2573FC2F7D346C1EE423CB9
-:103B600083C7F3FF8ADDAB891CDF4BFA734AB86465
-:103B7000B881DEDBEA7525E3F71BC23D3518EBFEA5
-:103B80003CBB2E763DE83D1B30C6087C7635BB71CC
-:103B9000BECF84FB24A78FF5711AA227CBDD961D1B
-:103BA000DA007AB2E85D69A8F75A34F2392FFCA13D
-:103BB000BF6CBD65E7A610FD2BFA9B025B2B008F47
-:103BC00000BA6D95F5E681FE9624EED006B4633119
-:103BD000B80AA93FE55CA3D25FD337EB6FABECF734
-:103BE00052FAB3DEA31E9F55EFA1F159E5FD47E957
-:103BF0006F2B8E2F045FDDB43FD98E1EE86FA97A3C
-:103C00007C568387C667D572FFE1407F4DDFACBF2E
-:103C100036F91E934DE6D3E1CEFD370E9CAB761AF6
-:103C200051AEB429FE40797FBB14B4BFAD96F737CF
-:103C3000E5FB4B71E9E4DFBDD433DF186A5FC3FDF8
-:103C40008CC97A2493F54826EB9108CF997AA63E41
-:103C50001EE8B0F0C5B6F922ECE3731E3A333E1508
-:103C6000E0192FF6CF17615F9AF3E2990349F0C983
-:103C7000CB2FBECCCB7F78E64A32949B7CEFCD2F06
-:103C800003382A96EFC70ADE4ABFB78DE27AA3BB94
-:103C9000E173EEBF04F98AFB5663AA87A17FF14264
-:103CA000727FD432A8EF4EE9B72C0F312F4AEA6E5B
-:103CB000384F7E46147928FFE6E1BF40B4CF53EE7B
-:103CC0006794ABEF6744456D22FD2F8CF9CD28EF4B
-:103CD000228C0EBA4FF8D628BE1F2C64F60A6E3717
-:103CE0004859F2390DBACF31BF586ED77CCBCFB11E
-:103CF0007CA1C6B11EEDD9DF4EAA8A47F558391707
-:103D00009737787F72D7F51B9C1F0EBE3F39E7238C
-:103D100081EBC223B8BFA53B57E2F7B902FC86A8E6
-:103D2000F70E379FB5A3B87D3F389F0E3E9F310EEB
-:103D30003E9FE6FEA8B5B0FEEEE87ECB13C49F5DC5
-:103D400021E76BC8BC06CD5FFD28A6D8795AA4B779
-:103D50009BCDB732AFCAF9C14641CAA2FDEA4F793D
-:103D60002AFD8331BB142A8E83F419B8BFEA6D4E45
-:103D700086FE195D9C3D07CF9537FE451BF25CDE44
-:103D80006E793ED64685D3B9CEC6283DD9DBDD5106
-:103D90003319FA9745D3749A97B2A8723A6FA98DDE
-:103DA00065ED688F069F23D78EB89BCE0169AD68FD
-:103DB00041403A702ED961A4F889B9E886E7C8C5B0
-:103DC0009B9D238F99C9CF9147E9257459B445EA42
-:103DD000439E237F6C14DFF7BB713C71883F8C27B7
-:103DE0006D701CA299C7D1313F02F2F56617237F8F
-:103DF000BA3CDEC7E47550EA1BCC1E86F240ABB776
-:103E00004BA8A768C3F93E61B069584E08BFC8F710
-:103E100047E9E8FB4F72CD34AF1A23D7CBE7FC5A02
-:103E200008E94F7A7594E24F0A4D67C3D1C93C0D3A
-:103E30003F47A7F0E102939ECEF72D30D94AD10F2C
-:103E4000B20008EFB39880FAB72DE2F78145BB0DB9
-:103E5000E9E737536EFFF96F18BAF9B97C3E35437D
-:103E600047F7E34E09CC618F197A7ED5E98C9E869F
-:103E70006E9ABB669D5987ECF7E2F2EF15617B867F
-:103E8000E353751689EC9F7746A15CA84E5B1F0F24
-:103E9000F0A2CA421DDDDF94E344EE082EC79FD195
-:103EA000BA4E8EA278D1E751A54847627F2AE2A395
-:103EB000C48902EABD372A9EEACDE1D7C5A0DE1843
-:103EC00094D3677FEF62B41EB6507A12DA4F2C306B
-:103ED0006E23CB07B4A302F3D17E6201EB272C2F14
-:103EE000B6F68590174A9A60DB92520D7C9E90D070
-:103EF00042A992FFAC435BEE0FB1AE57E575FDC62C
-:103F0000764C1B603B71D08E01FBE52ACEDB17D5CA
-:103F1000A72CE36148756517C98EB1E9153E9388F2
-:103F2000BF06611EAF04FB4575DEB0D5EB4BA1FBB0
-:103F3000FEF2386D2BD646A31D03551C489FDBBCF3
-:103F40006D29659983E3C8CE91E9138DB689A817C9
-:103F5000F35F725CCB0CF497249B34743E012653C0
-:103F6000752F616E59F4B4383445DDCC6E92D02E85
-:103F7000EF253D3FE1BA96F820E1F0628671ABA4EF
-:103F8000B87601EF030DF423DF6FAE97E3B9575C0A
-:103F900065348E04EBC0FECEC80E8DF3CD4579742A
-:103FA000E5698E51C28FD5E5C971FCDCC2FDD5E152
-:103FB0007E09E83AA9B6574038010C38F4C5275CA9
-:103FC0006F4C6B4279F25A04F98BB56D99CC07F2BC
-:103FD00027557445E5E03CFBA5FFA6C990070BDF1C
-:103FE000AD7C209CF4B336A16506D925F769582825
-:103FF0003FCF981CEEC728C8E1FC9F606B4DA91EFF
-:1040000087E9D344375F97CF6790B31DF4D9119FE9
-:104010002DFA581CD47B9A75A1E9739BDCEFC07E06
-:1040200021CF5F187319917FB582933B39F7EEDB8F
-:10403000B7CF82CE1346E75536C97A8DD24E444E5D
-:104040003B1546D81D0CCF450A6607DF07CC3E9BC3
-:104050000FD6ABF92B6D487BEBC11C791F496BB2B6
-:1040600061FDB24CBB0DFD94C1F7551AD326DA7031
-:104070007D1A670CD0A931705FE84ECB7E1FCF53FD
-:10408000997A742CF01C5970AAC77321B1372897FC
-:10409000CF97371DE2E7429B4C45BD780EA1C9146E
-:1040A0005744C7FE4CFC9CA952DF643A46F2DE64DA
-:1040B000E7F15613EE0F02A2C7E7A13BED18CD833F
-:1040C000526F5A0E97AB267B17C3FB5BE1763FD549
-:1040D0000B139D3E0DE01F16C7E8FE4F9891F35558
-:1040E00004AC8F3180EF957E6FCBD1D1BC352517D5
-:1040F000F596107E22DE04674DB6221BEDDB38DF1D
-:10410000D06F63B442DF9CAF1F97E75B69A7513E56
-:10411000FF7A4F43CEFCB258F41339D7E460BBA604
-:10412000E546B483B491E36FD8DE8661DB6B5E282D
-:10413000B7F738F28536B2C88CEDE9505E84A0C37B
-:1041400067E476FE57E3ED30B374DF97605A309F33
-:104150002D94DEA3A4468CA38F1BFADD3796BFEB0C
-:10416000D47E2490BF7B71FC2B93CF1E2BA11CEE21
-:104170003FDA2EDB278A9D6191DBDE2EF07BE83E65
-:1041800021DC4EEF36C87687254C3D0F83F741F989
-:104190003A5CAEE0E7E62EC7318A6B04F3F3E577CD
-:1041A0003E8A0EB44F50EF736473BB0453B44B1C80
-:1041B000B29F0D61F41BA09DA2F0FD805FB742FA93
-:1041C000A75B003F03C86F0DB42B247B88BE0DC9CD
-:1041D0007D69C8E7A9F23B0543F6D75C2EA7854762
-:1041E0003F4B43FE2E8BEB4FC0EF82F9FC8547AE71
-:1041F00026E0785E983170CE86E243AB17A7F37B5A
-:10420000D9C7FF1CED0AD1FECDEE7F459DDDB486FA
-:10421000F4C0E55C0FFC5BDF07DBBE8CEB9D1D8211
-:10422000DAEFA4CDE57AE75FE47DCC7A55A4F72DEB
-:10423000CE65B92E201FB60AE6E5287F531FE1E7B9
-:10424000E6563F5EFFD90321F84118EDFA734E8020
-:104250003D5CDCAC273F5AA3297DC48DE21CC3AF73
-:10426000B387CB71797D4B1E35F2F3242EAE175BED
-:104270005CF7D33995E0F323C3D53B24CB3DA5BEF2
-:1042800001DB4779629A47FE804B6823A0BF4D96B9
-:104290007BC17876E264C8F36304B9127568451887
-:1042A000B6AB93EDB1ED8A3FA3A2C8E808F85EB7BC
-:1042B000B8C8581A402F8D8C9FDF0D6EFFCEDC01E1
-:1042C0007D5AA5AFE8709F45DF509CF8A7013943A0
-:1042D0008A65B8CA8E51FA0F3E3F16705E2C8CF379
-:1042E00029B7675AF1DC18E8B76B2B968FC4F96DC4
-:1042F000155D2F58611EFA3F30D039E70F65BEECCF
-:1043000093F972B8F5F3B143A08C31F6043B829770
-:10431000D6804EC68F40FE68CCD494FB438CB35CF1
-:104320001E6708FDFAD6DCAFA75F97E686D0AF51CF
-:104330007F7604C51F0261D49B1D21F4EB1382EC30
-:104340000F90CFED9CD0491D7D300F276E1D616F02
-:1043500094E89E91C35E04F6C38B6732516F9F232E
-:104360000CBCC723DB318C60B02316225E739967C7
-:10437000DF0302C5515AEE48A3EE045C8F9BADA744
-:1043800024FB1137C23A61DCA1F5DAB219A1E20CC3
-:10439000FF38402728BA02EF07C02A04C49586C414
-:1043A000CB82E263184E1938FFAB1D5AFFAE62751F
-:1043B000FC6AE335EEBF30AC60FE27043C1FAA2E3A
-:1043C0009F5FAE0B8ECFA9E25A0B9DBA607C7C88B2
-:1043D0006FB28C6FCAB607290E3E2D45E4FDAC6462
-:1043E00064CF07C7BD0C85BD0E2DEAC3158CF4F74D
-:1043F000603F369E1725FF5E0563CF0974DE5A7D48
-:10440000DFE4E959E7F8FB1C2DE5D88F2D53C350A5
-:104410003F0EBEAFA0C49BF0984CE07D69E5DD2265
-:10442000CB620DE1C77CB753B9E29787FAA6124B6E
-:10443000C0B9EE556CA03EDDA3F2851EF7D6D65965
-:1044400014EF4F1CEF29EC82A2243BA37948AA6603
-:104450006407C03CA8E2FA86945D34CE4B358CC527
-:10446000F238A0AA3C017670A44F18BF2ACE0FE301
-:1044700054C1C176E7CDEC4D434AE60DE5F9CDFCDC
-:104480008D06395EF8466E641CE93B63D818D47714
-:104490002C8B9FA6F5B804EB817E59348442C5036A
-:1044A0003743FB6807BA905FE2D1DFC454EFCA30EC
-:1044B0008748F7C984628EB310EBE4F1E17C46FCD7
-:1044C0006D0807950BF859986C70E0BC1B0C00C385
-:1044D00090053D332640BE56F637AF1598883033E9
-:1044E000DB8DDC4FA8BC6BE3A7776D86EB0774FF11
-:1044F000BE30ECCFC7BF53FA19F28EDB0DBE27FBDF
-:10450000CD1CFC7D19F91D95FE879BFFE1DE6DFB3F
-:10451000C3D4772770BF6732D16BE520BD12BC4C86
-:10452000A647FC1EE5C2BD4AB1AD770CDE373CFBA9
-:1045300070841DFDE003E3F0DDA9E5EFD1FD75ED2D
-:104540000DE0619348BE0F8C4B6EEFAF1D17FD025F
-:10455000E4DA06BC3484E74F2A199D27B0B84ACF65
-:1045600089740E00C6A0921301EF13407B1B0EF15D
-:1045700073AF5BF19D0B71B05FD42BD06EB0554221
-:104580007E083B4849AB19BF1FACE0D5A8073D1AD0
-:10459000E952C3F5E8D9A63E11CF35E9E2FA45E480
-:1045A0001FE7682EC707E8379ED1F90B6D927CCEC6
-:1045B00071A4C4DF4DCBE4FB9BD2CF84D11A59FE4A
-:1045C000F7D2FB47B3234ED54B76C6F2F6C52F4440
-:1045D000FFFCEC11A7EAD3002ED867E170D2A92B1B
-:1045E0006966C6ECFBAC0BD19F3F3BEFD495748062
-:1045F0008BF6D978F9144646CEF87D090BD19F3158
-:1046000061B459D5FE5B38D7F1DF3CD51A3421CFE0
-:1046100063DF365A394FC9E83EADB3F397A7312E61
-:10462000E954F647872E48DF81220BDE23937F7102
-:1046300051140F9D29D3D99DF8EE5214FA2DBB6861
-:104640007E470DFAE99FFE6BFCF482437997CACC52
-:104650002A81FF1B1B982B2C2380EE9943739D9F6F
-:1046600003A6B881828FD2FF10BC6069C59840BC98
-:10467000B6513B0A5E170A0DA48705C7872E08FDB1
-:10468000DBF19C54C4CFD62FC275BA10D99F2A0033
-:104690001C9EB79ED6ED427CFF76C11E00EBF83A19
-:1046A00056EF2BA275FCA3D6513D7A02BEDBC5DFC7
-:1046B0006F6896E3504FC6BB7C689F01DDD1B9326D
-:1046C0005F8A9EFC4865E30547A03FB06E34F7CB98
-:1046D0005C92D3698616CF49A04BF70181AD85FA6C
-:1046E000EE6B97F5A89FCCEE3CA3473DBAEEC01900
-:1046F0003DDE4BAD4318DAA9DBA67784D2FFFE324C
-:104700005AABF2972976D7D194ECF5E877ABAB1694
-:10471000E81EDEEAD7B91F6EF5321C256377DFB2DB
-:104720009FFCB855CEEEF5982E657D47F1DD88C526
-:104730002EADEADCC0929A08553CBECA13AB8297F4
-:10474000B6C0EAC03EBBB42149F51DC35DCF82EFC0
-:10475000280EFED0FEAF90D771B16D732FFABB1645
-:10476000BBD47ACCECCEB5620CE2ED11EC1ACEFEE5
-:10477000127EB7848F10D200BD0AE67D5A07D7A3F8
-:10478000EA2A8C649F54220CF35A59ABF5E39373D5
-:104790004753F454EEEE10A8DC2D97BB6B046E5714
-:1047A000CBF275A98CE3928327A7D175529FA337CB
-:1047B0003300DFA515E5E7881E657D43195785C4DD
-:1047C000F58D0D29EFE9B0DDA5DF17586C1A8D4B7B
-:1047D000A5472DA951C3551E5D909ED5A743F9BD90
-:1047E000B4419DFFF3D1F2BE9EC7F2909FDE182D1B
-:1047F000889F1807E13FA5BC7702EF815DD23A0F91
-:10480000227DD6EABB0A70DFBBA47511AC94437E4F
-:104810001DDFAFB8BEA201CEC3EF1B750E33DEA7FE
-:10482000F5AD14886E97B000BD276DB03EC1DAA11A
-:1048300070BF2277C39CF5E40F3D2898516F281371
-:104840001D22DE836F1CC68F7E51E68313AC2F1FA3
-:10485000F1CA46228575CA9E3F82F699ECB796F951
-:10486000308E943D4E20BFC49D80714311A622C955
-:104870009139B03784419AAD6DAF20F93E566FE65D
-:10488000EF62DA58A0BC70FC331370BE1075B20B27
-:10489000937BE8FDBD396D9B2FA25CCCCC70143DA1
-:1048A00005F83D19C6FB7FF275C1BF16DAA9CB3FEB
-:1048B00046F2D30AE481FDD6D96439DAA1F6CF5A9B
-:1048C00051AE21C1CCCAA77E1394F832D015EDC3E6
-:1048D0005DA5A49F58E57E9F2D94B8DDFCA07C2E9D
-:1048E0008DF9D6E2F9FABED18CF295F41BFBABCA76
-:1048F0000431285E50371AE679A5AD4F75DEE95BC5
-:104900006CBF01E92CB87D18BE2A5E394D7B2D8A1B
-:10491000EE771DCCB0DEE8FE94D6A83EB7A4338770
-:1049200007DDBB53CB9FD9F6A4A07B771941F7EEE7
-:10493000F282EEDDA9EFF92D744E09BA77A7BEE732
-:1049400067B0CD54D50F93E6A9E0889CBB55F523FD
-:10495000EDCBD5E7AE8EFFBC4248C777067D7D2EF6
-:10496000988766E08DE298C17D242F0A2A431A3E7B
-:104970002ECC846973A1A10BE9A43991DBE786E30E
-:104980000FDBBAA01DE388978CE86FFC89E02F4508
-:10499000FBC4289F5319FD1853ED33AF1570BE5259
-:1049A000D2DBF25CB3F3617DF2F74A49FC1DE0DE35
-:1049B000D1B83E467C6C03F9E6557EAF78AC6C47C7
-:1049C00028ED3C5F5832350FBECF7FCC3183E2EC0F
-:1049D0001DFC7EF04E3D8FA7F85EE5E75BF33BFAEA
-:1049E000348E00FE3E99C7F590679CA5141FA9EB75
-:1049F000845D16F9A9EDAC1EEF65D4757647E17EAE
-:104A000056E03CAB47BFC960BEBCCF89FDE168AF93
-:104A1000FFAC3D743C6D6D9E9EF8E3982CD7AB1EA9
-:104A2000D672BB913966E1B971455E57EDE7E3ABEC
-:104A30005AA8E7E760311A1D426E839C3EAB96C3CD
-:104A40000EF57E708B7F3DCA0E90DFAA7A4B174C15
-:104A500027BBB712E436F231C87375797213C917E0
-:104A600090E7AA7C77DE803CCFBF0EDF9D766A425E
-:104A70008EF3708148F378DA3595E6FF199847F49C
-:104A8000A73D3364DEF87CDE6CBE5EC6B50F58B75A
-:104A9000E07ABF2EE0EBF6F230F2FA7D795D770A2C
-:104AA000BD45284CDDCE70A2DB254663099E7B38D0
-:104AB00096F26513C6E1AA7E2ED03DFD7FEB3E6ED9
-:104AC00041FD5FBFFFA805FD61EEF6A316B04D598D
-:104AD000AD4E5A8B7A3CD0851DF59EBA8E2EC27F84
-:104AE00065FBB86ECC5FD921D0FB3DEE0317A7D391
-:104AF00038595F13C60B770E83D78FF2B8FEBE37D7
-:104B00004FE27E3017F489FBFD0183DF2F201D80EB
-:104B10005C42BC5E17F0E535B673A3B122941EF576
-:104B20006FF27C1FD9A867E8AFAF85EF711CC75241
-:104B30008EE98D4847FB05B2B5DDED27174660FBD2
-:104B4000F53A86FA8582DF1729BD1FE2F83FA8D61D
-:104B5000A1A78035566B69BE3FA8D7523BDAFB74DC
-:104B6000042F5EC1CF551CAEFEA82909DAFDA05660
-:104B7000A07B0C53EFFBF3318417AFE0FA5A303DC2
-:104B80002BF41A4C9FC1F43B844E6BBE199D1EC979
-:104B900093EFD5E4B102DCE761DDA759917E1EE118
-:104BA000F7E32BAE1DD6A17F33BDC96C7F02E03188
-:104BB0005AFF7A0BCA89C3BCBCB07687C0E58D7436
-:104BC00037F26152B39EA1BDFB7E1E974BEFE37A95
-:104BD000C5E3D0FA058CAF31B1371DE5529A1C4FB1
-:104BE0007A45C72AF6535C90CB9B31AFD954EF96E8
-:104BF00037E571BD43918340E6AEFDE4976D4FC448
-:104C00007B142FCBE74153E5F6B232FAA7CF85F4F8
-:104C1000AA4C2F67643C14F8B24CFF6CDBCF681FC2
-:104C20009F2DC759663674D179CC3C83EB5394875A
-:104C3000B352DFABC57DAE39FDED7C3A678D3725CC
-:104C400026E2FBC9FC7778D2A7DBD660DC2F379C45
-:104C5000D631ECE053741E382C6BBC35549C434960
-:104C6000DD57257A8FB0EE6A3AA50A3CF7D0397D38
-:104C70001FD90117A7139F5CB5A9DE2DFC54C67B75
-:104C80008CF23E5D27F7F3809C168B8B06EB29F3A5
-:104C9000809E651C6F58D62E5AAF35AB5821A9752A
-:104CA000EC29FECE66ED4901DFBD58A473E84C3017
-:104CB000DFEF8D60251F8BFC1D245736C64D8C748D
-:104CC0002FFB84D74C70AFD746F029AF44E9AD61D4
-:104CD000CE887C6867E1114F16CEDBE1945627DE63
-:104CE00057BCF08E4EA66B33BF2F2ED3DAE54E2D78
-:104CF00033629CEB00E8E3C220FEF75C4DA4FBDDD1
-:104D0000BFC3FEA09F950DBF217967AFB9381DEDD8
-:104D1000A2C2DA334D08BB1BFE3C1DF5890F61FFB3
-:104D200020BD1EF47B9B8072E424BDD35D79358663
-:104D3000DA7959D33F1DF9CBF7A640F76F3EECB8AF
-:104D4000A8B7F2FD89DC73782F1CFDF2B3F2A3B98A
-:104D50001CE92CD4D0FA3A24D53BEBDDA3FF2B0A77
-:104D6000D7C3D820FD7A0A7EDFA365C8BF9B4AFB64
-:104D7000A3CC21E4EF69F4DF65F371B0ECA1E51594
-:104D80007A5F169E93AC90E938B8BC3C7FC03FA1D7
-:104D900073CAEFEB0801FEA12AC6DF3F05BBA72BB4
-:104DA0001CF8B8AA732AF967AA3CC20DFD33C3D117
-:104DB000E1D74DEB18F7CF2830DA8D817E4DB41B4B
-:104DC00099AA7F1F7F072B25F386F774DC7D891452
-:104DD000CFAF6B6614EF5A797534A5E75FDF2021FA
-:104DE000FF18C3FB5BE97E6BB686EC8C953EB5FE87
-:104DF00033A580CB8529057CDE5CF9602FE5B00109
-:104E00007B09ECA27BF3B95D147588A9ECA5E07C65
-:104E1000B2978CF23D1D1013AE5742E07D474169B9
-:104E20000D7E97CA5A88CED93BFCFE72F038D7E483
-:104E3000733E55F87A31F235D26F07E7EBE076E74B
-:104E40001594AC413EDA384C7CAB5CE6FB956D8C3E
-:104E5000E6CBDD1643F3F4056B7396025D7E0178B5
-:104E6000E03DD20B4E6744347C7FC1E58CC0F33DFE
-:104E70008A1CA86B0BA7EF3666CE8BC573A3CD48F3
-:104E8000F7D0DEF98EA9469CE77BDA38FF29FD7D55
-:104E9000D8B53816F96982AE5F6F87F2E4CE335128
-:104EA000A8F74D787D7E2CF2E17078FEFD1819CFC1
-:104EB00086C4121E9787BD70A26C4F007EEE27BA83
-:104EC000E89DFA871A18D16FF7ABFF56877C7CBE36
-:104ED00033C28CFBE6170723E8BDCA0B6F1AE83D07
-:104EE0009A5AF97DD52F747D7348BF7C5D4BF722AC
-:104EF000DD6FFE472BF2A3FB55039D3B7CA873C3DC
-:104F000045DCF76A3B679CC377566B5FFADBF2C3FD
-:104F1000CA8654D28B14F83FBC4627BEF37B5EE4AE
-:104F200072E2A18E7F217DF7A16B970BF07CCA17EF
-:104F300007FFC744946BEEB72E4F4479E6FEC5E5F4
-:104F40008958EE7E2DC2134A5FB95EC0FD3ECA7E0F
-:104F500099F6AEA8F20FAD90E9236D5D0BBD073D4C
-:104F6000E1E4027BE0BB0F13B2344EAC3FE1B76526
-:104F7000B1F7057CB7AE57A438E3F8936511D501B6
-:104F800074794F814EF12F7E23BF0E93DFC719F046
-:104F9000E3F4F2777F36F68AFC7DA31A81EEA183D3
-:104FA000FE32E45E1AADFF8A587ADF8889CE3BC7AD
-:104FB0008C47388BDE05623EE3D1CC003D6971AF92
-:104FC000A6CB007454D169E822FDBE573C43B0AC77
-:104FD0003FDD73F1D3C83421847F26E7D43494E3D2
-:104FE000C17E1AF84522DE8ABE55E971A520FEC1B0
-:104FF000FE9BA51577907F28D87F93D62B6A668F66
-:10500000C7F7DFE93A2F8CF76923F28BA287E2FA20
-:105010001D08C1FF6BC67039A6F0D5BA5E1EFF5DD4
-:10502000D75B6ACC84B456E6AB03B09DFAA0FD759D
-:105030009DF377A31F61DDB545116360BED6BD3B0F
-:105040008F3D81FC6F2E3566E177D7EE302ECC1F79
-:10505000A497E0FEA68CE1F272404F1866DFCB9772
-:10506000F1FA5BED7F3963E4F36CFF87EF7F6087D4
-:105070008F1DC3EDF025DC4FC2EDF0E07D4391C7FD
-:105080004ABB2E799D87CA63FE7748C05E2679ECBD
-:105090001A2351BDE4CEB9B16447BFBB2056320DCF
-:1050A0006D3F43B46B62F287B6AFE8716E9FE3A8C1
-:1050B00011ED1C8796FB491708F4BE99A2F7B99D1C
-:1050C00002E9E3EE4A9D1FEB2978F52EE07ED585B7
-:1050D0000E9D3F4C18D40F15FD71A0DC2E50B9A2C7
-:1050E0004F2A7A63AF93FB71178CE7E5B786B91641
-:1050F000E17C7DD81546F91326F17CC69C479300C8
-:105100005EF43D8111FFCBFAA442A7C1FAE6A5CE19
-:105110008C1BBED7B34DA64F85CF5283F843D9BF62
-:105120009AF339DDD7E1FE1D8BFBF77FAAF4F2E09D
-:105130007661FF7E08F16F461D12BE1FFF5BD1191D
-:10514000CA3EFF4AD60BFE5E59BFDE232588AF72EA
-:105150004E76B87DB54ED66F862B6FCEFF7AFCBCEF
-:10516000471EDFDF8A9F778EF9BF439F1DD00BF567
-:10517000A1C7794741C94FC6C0BC866B3D749E73B9
-:10518000B8F7CD1E95F555B07355747C3445AF41D5
-:10519000BBC85DC3FD03CDD1D2AFC97E39AEA5F783
-:1051A000571E92EF733E78D54C692DEAC9902ED9DF
-:1051B0007B92DED95D52A3C6BF197DB7F8FDAA3434
-:1051C0008AEB57B132F22B5575469BF1BC7F737C4D
-:1051D000FB31E42BDF6EADB43BB0FEC6D1727D2354
-:1051E000F7B7D544D3DF8F61417A40952758DF5711
-:1051F000EB0553643FD170FAC12FBAC3B85CE9D153
-:10520000129FD739F9DF55D07772B9E06E0823BF06
-:1052100009DA6B88D7670D821FDF3D5F29D7FB4C0A
-:10522000EC25FF13C5D3A0CAB9CEA72C0EB2DFD48C
-:10523000F1A395BB7E4B7233388E1473408E0B0DE9
-:10524000C48D26D2799095604FE29FBC724BD25D9F
-:1052500038FF801FF393DC71A8FC30977A3E22FB65
-:1052600073C9EB3CFE33247ED43C93C78FF0DD95AD
-:10527000107EC8A5238F1DC5BFA374B3B8515DC7E9
-:1052800049BA473244FF08D23BAE8D51FB19478AD9
-:10529000DC8F3BB25330A37F6AA43C8F7FB7319C35
-:1052A000F4EAE97FA88E4579A0ACD3F9B97C5ECF4A
-:1052B0007F70A504BF9BF807D11C06E3FAC507F56C
-:1052C000BF49E2B06494F0BBFA08B463CEFF6175E5
-:1052D00004CEEB2F20C5BF2FF1DA6931A43FD22BCA
-:1052E000CB2DD80FA30BC8BF2CFBA545D80F230788
-:1052F000FD39C1DF6D97BF6B063385FC98AFF3F8BE
-:105300007E73826B26C1CFA633FE1EA683FCCEFF22
-:1053100002748DFEA23C182CC69F7F1ACED661BCAB
-:10532000A839DEF536F1D1B31A09F908BEA73893CA
-:105330006FBF44FB234E19C6730AF4FC5D46EA0CAA
-:10534000D66BB4BC8E0960C7623C09B05980F1E6E7
-:105350003C39AE5310CE446CFF499D6B13BE97F998
-:1053600064B7685F4B4C608FC577BF83E34B828324
-:10537000C7C5953893121F1F2ECE24603F059CEEA3
-:10538000F8B91587807173259EC4BEE7A4205763C2
-:10539000B187CEF73F53C848AE7F8B719E25F92168
-:1053A000E24835C86324CFD571C54D39AF109DFE95
-:1053B000B5F1C43D63D8B71CFFE2F3138CF7F8E8EE
-:1053C0004B16B2B7BEFAEF51B4CF765EA6FDF042EF
-:1053D000BF41BE8FD0C7FDEC9D3AF22F5C00BB2DC4
-:1053E0003E609F3D9ACFDB3DD43995E8FF406F5931
-:1053F00004D63F2FE76F7C77C1FCD94897BD22BD0B
-:10540000078BE7E3D00E3BD02B4E40BDE55B5C97AE
-:10541000EF8F09B12EC6F0D0EF4CE4CB7C945FC087
-:10542000E963EA07DCFE72D7F3388A59960BEE720D
-:105430003DC9C163291641F19F5B43C5595EEFA782
-:105440007DA36A8540F71CBE719CA5A35BDEB78275
-:10545000FCD3E5D3496E0EE7B70E889BABCAB715F0
-:105460000C9C8723FF75548199C61DE3292CC1B379
-:1054700087CAF8BFC575B8736C083AFB16DB5F695D
-:10548000FF6EDB9F92F7DDB6BFE63B6E7F6DDE778A
-:105490001BE7DEF11DE37FF53B6EFFCC773C3FAFB2
-:1054A000E5FFFF73000370709C3FF85C4070BCDF49
-:1054B00070FC3E1F966D1036F777416A8C7AB542C4
-:1054C00000512D46EFA27708664DE271B08D65461A
-:1054D000FF0E61F07C80325F4B0BB91D61CEBFE8DF
-:1054E0008B85794E75F496C5A29F6C127F87FD82DD
-:1054F000FCCE2A13CDF4CE18D44CC0FBF1CD61A163
-:10550000E3AA61727BC3ED23CF1796DC31369EFE92
-:105510006C43C8FB1D2FC8FE47730723BF2413A588
-:105520008479D4AF9480FAD088233C3FAA8B397613
-:10553000105E52DA3CB207A534C46F8B1CEF8D9914
-:10554000999D86FEE818D00B311EF814C605298EE9
-:1055500065A67A4A7F1F8CE5FD6DD13181EE5BE552
-:10556000F2F34CACF9A02A9EF78EAEEBE36502C5D0
-:10557000F39623FEBFD274E5EF4C938918E637FF0C
-:105580008099E28C2726BD487F775689EFAD31F3AD
-:105590002A87D16E063CD61C1C47F4BBE4D0A4F786
-:1055A000F1E93377A6680F754F51F1179C96FD1DF1
-:1055B0008ABF40896BFD5EF6937C88FE17BA1F2276
-:1055C00051EA1DABF9B6F727EFD810FCBF45E0FE56
-:1055D00021DFAFB87F689CDE9E11786E72B33CAF5E
-:1055E000CBBA78DC42F1F7EC93C733EE116D97013B
-:1055F000F6D2714D63F4B8CF8F6B4A09C7B4C0E1DE
-:10560000D7E07DF0C5D5FB35CAFA85A2A3D6B1B2E5
-:105610001FA3A79FE27AFF1214E7FF602C3FBF3061
-:10562000AF90E3F101D82408AFC9121B517D1C7162
-:105630008B591B2A9E54057631E2B9AC99E3ADCC67
-:105640007755973415FB3973B4BF09D3A29AB4A91F
-:10565000E46FAFBDD884FA9BFBDAE563B793BF4C28
-:105660002FA13D714F9FDAEFB60AA3A5F18427FD64
-:105670009D5ADF0C91ECE3713344A29F98AA30B29B
-:105680005F63744C6B42782ED78B8ACAE3A622CC18
-:105690001644933E58D42345DF973FE8078B995132
-:1056A0001F8FF374B3F8AAE24FBB35CCF11AAEE703
-:1056B0005F1B5F5DF9CEBB74AE541997322F4A9CC5
-:1056C00074B8F8AA72CEC15D7E45752EC32DF64F13
-:1056D00047FFE3B88367F4F2394B33FE1D6125FEC3
-:1056E0003AEEF58B147755E2AC6ECF45D2ABE13B89
-:1056F0003D7E3F0E963F2106DF17E2F1D757F19E20
-:10570000941EEFFF99E9BED41BF2FDC54E183FE68B
-:10571000BFE9CDA1B4CB6BA7F490B7985277E7451A
-:105720008AD77E38561DEF53E27997B4CE3363D5CE
-:10573000E723090E8EF769C3B9BFC6DDA3A3BF97E0
-:10574000E17EC748F2BBA47319DDEBFAF2A46B2427
-:10575000E25D87F1B600BA38EFB087E13B61E79DC3
-:10576000F6308CB38DEB3EA7C7F32F7562AF1EFDED
-:10577000618071121E4D741FB8C8CFF77696D0DFC6
-:10578000E3BA695CACE36F1317FB9FE541012100AD
-:10579000800000001F8B08000000000000FFB5170C
-:1057A0005D4C5367F47CB7B7E596DF0B2A3F227256
-:1057B000C16298A2DCC240A7311674AC135C8A4A5D
-:1057C0000201B5662E92092DD9CCC2CBD23A8901FD
-:1057D000DDC3B2B864F3A92683E8B687FA93AD6E49
-:1057E000550B0B84252EE2C39C71C9520D3333BA7D
-:1057F0008162DCD85CD839DFBDB5BDD8BD2CDAA458
-:10580000393D3FDF39DFF9FF0A003007DAE756B9E3
-:1058100006E74CF8A5CFC6FF0F3DA44F8CE3DDBDD6
-:105820004BEB2617C4F1BB3EC9356903F85D9CCE2E
-:10583000942B00F687CE5A1C041FCFAC7621FCEDCA
-:10584000C2DFB54A3A80F7D24C2D20EEFD66A6960F
-:10585000F8DEAFD27A02E94FDB7BD78E975E047019
-:1058600096416B10F9552EC17182E0B8C3FA4645D6
-:105870005C6EC02538E9FC80AD349BE8C75CA5D9D7
-:105880007B13F4F539456700E939AFDAAC89F409DF
-:10589000BB19A006E90C5CC124F66B5581DBDF7FE8
-:1058A000D22A4F4A7A1CF1DB1DCC36E0DE50813C17
-:1058B000591EC7F7D38F02FC6E6622D40274E9B971
-:1058C000B86472D7AAA8AF3B3F6A8152A24C5B5C16
-:1058D000AB305EDF4BFDAC1260F8FCBEE268051732
-:1058E000952017A04D3F37E0DC5B9CB110C07F3D99
-:1058F00005CA98461391DF4A3F148E2A22DA69A717
-:105900005F78E5B6FCF7274CAB11BACDFE68C2BD97
-:10591000DA9D82C39AC9ED2E6DCE207931CE2F212A
-:10592000A5D34BB7AD22CC5128E413F417C25A02C9
-:10593000D2A8AD366EEF06047EB0A17C9B5388A43E
-:10594000A09DD6704A04506F955304DF8B087BCD21
-:105950008112467CF126E72B6F3611BF4FAE2A0429
-:10596000F4E3E7CB16794109BFDF6434218EAAF353
-:10597000D3FE523CAF763195DC6AEF34F2F19341BD
-:105980007EEED6E3B23334FC7221F75F36019ECB54
-:105990001D03388E7677F618CFED6E75DE61743F95
-:1059A000F8A07F33CA814D900789DE6B94A33A3B00
-:1059B0008DF11F007026D64337D5410D41C6E1E772
-:1059C000E813D54515062A58113F37BF7E4674F9AE
-:1059D000F9FA62F00CF117517D560DD828BF4D022F
-:1059E0009401E1F5922D419F5F15B99E0F6501FC71
-:1059F00028D717DE3EC8307E7D8F5F915A506E4AA1
-:105A0000AE97CAD2E3B8F732D6531640F5F06C031E
-:105A1000C5FB589881154D79F3F1BE28577DB16EBD
-:105A20009CAD4EBCA7E6DF31CCF9443AD5819A0D46
-:105A30009A5F2061BCFC17586010ED55353D1C493C
-:105A4000A3F8B9B2D53285ECD80EA523EE6D126B52
-:105A500018E12E3C40F80E1690F0E7F62B9D5B0007
-:105A6000ED54B7D8AF52DC5B3ACCAA1588DEDA40E9
-:105A7000F46B5950372912FFC47BA9C42F67AA556C
-:105A800021BEB39EF88D5F4444AAE7AD14A56578A6
-:105A9000B7CB288D7DB3C1EA0E501F5537A311F443
-:105AA0006F47873540FEB5849BCD90CEEB41A0BEBD
-:105AB0007B5BCFEDB7458F32A3489F095767915F56
-:105AC0000BCCD316156135EA2EC84178E1BE05B07E
-:105AD0001FBCE2B44546B9733E4CAC05E04B9FC4D5
-:105AE00061C827836339C0D7BE7C0EC33E85D32FE0
-:105AF000FACA398CF8540E477C6B35A8CA3C9E957F
-:105B0000E1FB02DD27A75970259B6F7EBD3E62F940
-:105B1000AA0BEF29A67B3EBAEA2E9693C8C7205A55
-:105B20002C14D66AFDC930675EE7C306B2E381E88C
-:105B3000613AA760BE610D46218430EFBFEB6FAACA
-:105B4000529B6FD902B893F167F4FA048722D03CD4
-:105B50007A4BD2FA7F78C55F3C9E5248B9B21EF3A9
-:105B6000E61937410AD28FD46B737FBE9EEB184F74
-:105B7000C0B8DDC078129CCF6FB5F8CB281FAD74CC
-:105B80008F24E7A7F4FAC40A30BB32B49C32BC4F6E
-:105B9000476C0E6020B2308F1D211649C53EDF19BB
-:105BA000DE744724D8C3E096717E3CD77DD8E646A4
-:105BB000A589F3B6338D26F9135C4AD5E22C593406
-:105BC000D86FD5F65A935D8B730C6EB56B75719467
-:105BD0009A05EBFBE879163888FDE7A918BB4E73E8
-:105BE0002CCF01D08BC3C7939F1E31D13C0F99EFAF
-:105BF0003D99E3D81F798A0C1D3994370C26F6415C
-:105C0000817E0724C06D9463911C616E25CA2D1995
-:105C10009F257D9FD8156E2F77579001BA5004FEAF
-:105C200083345F462D50771AED779D637090FA3B71
-:105C3000E00205F7FDE8F11B874F21DD738EC9B443
-:105C40008EBA8357F99EEF162778FF78C2772DBC5E
-:105C50001E8337357A88390249F23A40FB1DED6ED2
-:105C6000467F686E741F300552D06EC339ADAFBD2C
-:105C70000E4B40417CACE81D91F09DE719E4D11C2E
-:105C8000532616A511FF80190225DCAFA6BA84FDA4
-:105C9000845F85FC8EEDCFD8FEF1C0F45821D56B22
-:105CA0002753230ADF3FB78CFB052F921BDF2FED15
-:105CB000A16133CD1BDC4306B9DD8E863B343F71D9
-:105CC000CF18E94B0EDFE7F98028AF53DC2F067EB3
-:105CD0008D3D63E16D2C095809157338CF3655CACF
-:105CE0003CDFAD6EC6DC181F497075919F7091C97D
-:105CF000346FE7C7ABD1AEF541A39F412FE677C81C
-:105D0000A2D5C7D03A16F0A37C23A294F7A18B7B2F
-:105D1000FC0CFD1CAA62AA40F120218CC7163D3E56
-:105D20002F801F6E4BFCA9706CAE1AE035AC612B56
-:105D3000D653A35E0F00016EA7F9E3D408BD238EEE
-:105D40009A83F92A7F97F8F97D6755E0FCD414E827
-:105D500049D6AF6BEC75B36A0DC93DF3F7D32E7B13
-:105D600092F7D347F876223B7BED4C24BF30BE2B15
-:105D7000A9BFEF155DCB1C41F481C9B58FCE755914
-:105D800022ABA9BE1F98DC1C8FF191EEA1FD828B86
-:105D9000EF16F591008CCF8723E567CC949776A218
-:105DA000C7EE5B1297E3B8E969FCA10ACFDAEFA16D
-:105DB000CA9AA7FD7E86FA17ABCF577F6EB2BC1D7D
-:105DC000A2F997A47E7ED2E71FC01299F7CB933831
-:105DD00083B68764E0753CAAEFF57EA6FC487BC8D5
-:105DE000FF9D190695F85CEDCFD0F47FA6EB8BC133
-:105DF000511DF69B35B9F9F627F439FC8BC9718A28
-:105E0000EEBDF2A4004A82DFAB82A9A024F85D199E
-:105E1000CA31E0F6C862837CF578A9815F33B1C2EC
-:105E2000C05F73BDCA80BF145D67905FFF6BBD012B
-:105E3000DF30BDC520BFF1CF6D063CD6BF7558B968
-:105E400089E73649AF1BE40A3B8D7E15F518FD2A1C
-:105E5000EE35FA15D35BE237FAB7ACDFE85F4EF602
-:105E6000835C85DEA1FFFC9149FB60203CC3F334D9
-:105E7000359D02133447C4A8B61FC266BE17A6F0EC
-:105E8000FFE2A2843C2CA7D73FDA19092FB3D2B97D
-:105E90000F9D362BBDDB2E510D603EFE05D7762EB5
-:105EA00017E00E00000000000000000000000000ED
-:105EB0001F8B08000000000000FFE3E36660F8515C
-:105EC0000FC1D3B81818367221F84301B7334368AD
-:105ED0003E16060601207EC7C8C0F09E91043338E6
-:105EE00010EC7E20BB0A88277150CF7D43112FE52F
-:105EF000A19F5D5FA0763D1518787F83B083100366
-:105F0000839B300383B40884BF5F0455DE5108C10E
-:105F10007E2E41995D9F81FA018DEBBB318003009C
-:105F200000000000000000001F8B080000000000BF
-:105F300000FFE57D0B7C54D5B5F73E731E33939976
-:105F40004C260F4242004F08202A842140088838FE
-:105F50000990068D9A080888CA000142483211A9A2
-:105F6000975E6D672214D16A1B2D6DA397DA0141EC
-:105F7000A3450D18E840031D4C41BC5A8D0A4A5BED
-:105F8000B541313C0A4978E8C5D65BEF5E6BEF332B
-:105F900099736642A2B6DFFDBEDF177FFE36FBECCB
-:105FA00073F65E7BADFF5A7BEDB51F2359C613D345
-:105FB00015847C057FD71372482484F4EB4E3B0B89
-:105FC000683A8E107F8E39B0552024B4EFEFED245F
-:105FD0008590B34DB355732621FBC79843D7D3F2B1
-:105FE000B381FC8099964FDD79C421D17CD54E5187
-:105FF0008272D33E2B7EDFB1510840DE6B6EFDF125
-:10600000B534DFB553249B69D5246437915442DA03
-:106010002D84FDA9F1985F6A65D9AA4DFBEF82F640
-:10602000CA836662A5DFB737896EC8AFDC2A040869
-:106030006DAF6AF783CA005ADFB280D06855697EB7
-:10604000EB638A1A4FC803FBFEEC68B31372DA677E
-:1060500021AA82FD286F1C494845607BE100FA7D3A
-:10606000C536C165A2F5576C3CD701F45534C9C398
-:10607000445ADF8A061B5147B0B6BF22D05ECB0719
-:10608000D8DE4E7928B457FEE53D0A11A19FB21B18
-:10609000BEABA27440BFB5764FFBEAB13D8D9F55B4
-:1060A000CFD1F6E87BD52F0A2EE862B58978808EAD
-:1060B0008EDDD6B94FDBA17FB5CAF0F8C87E2CDCE7
-:1060C00005FDA8086C520AED40DF2665E9C8EEFA26
-:1060D0005634FC879EBEFAACFE9E8872637ADA471D
-:1060E000593ABC3B5F4188BB91D64BA480523AAA37
-:1060F000FBF907422221E3A17E91A896EEFAA9E4DA
-:106100001107FE23F49F940FFEBDF181AD99DD725E
-:106110005BE9049975CBEDBC93CB51EACA8DAC5FBA
-:106120004B7F0CF2A0F4D4F99C983EEE4BC37483E1
-:106130004F45BEFDDC3702D37A9F0B9F3FE9CBC3AF
-:1061400074A3CF8DE953BE224C03BE127C6FB36F94
-:106150002EA65B7C1E7CFE8CAF1CD3065F0D3E7FA3
-:10616000DEB71AD36D3E3F3E7FD1B71ED3465F1DCB
-:10617000A63B405E346DF205F0BD5DBE064C83BEAD
-:10618000467CBEC717C4F411CE47C764922F513E58
-:1061900038DCC449C54E928ADDF932CD2795B07CF2
-:1061A000EA1DFE7C85E6533D344FF932A032946FF0
-:1061B000A6F90135AC7CF0FDA4C042F383FDAC7CB4
-:1061C000C823EE022BCD0FA963E5C337FA0BE268B3
-:1061D0007E7880955FBD2D5460A3F9AB1B5979760D
-:1061E00033996AA7F9EC10CBE7BCE19E1A4FF3395B
-:1061F000AD2C9FFB817FAA83E673DBD8F793CE0497
-:1062000044D51E2D871DB2BA9850596DF4CF704BEE
-:1062100013695E51EF212ECA1FFFAD6E299DF24317
-:10622000766379C83F1FCB9B143796BFE32FC3FC1F
-:106230002ED983E5C7FD552CAF78B0FC73FFBD9810
-:106240000FCA7E2CB7D4FA585EF163F980DAF5589C
-:10625000FF1E3980E5236B1FC3F23D4A00CB1F5F51
-:10626000FBA47B1ACDAF113C3F073CD2B49C640128
-:106270009E1AD34A289ED609642EE0F707003A8A70
-:10628000CB75E90AEAE18E3FE43E0DFA8B7F299057
-:106290005FFACCC399F8FDAFB01E99D623F65E4FD6
-:1062A000CE9B79BA7A72DE2CD7EA6980F7D658FB92
-:1062B00056CF8E3727E9E979B342AB673BD213DF7C
-:1062C000B77EE5BC35594FCF5B955A3D7B909EC458
-:1062D000BED1D37444CF9FA62361FEB4203DFDFA06
-:1062E00046CFB8F7F4FC19F75E983F6F603DE97D43
-:1062F000ABA7E93D3D7F9ADE0BF3E708F66B50DF75
-:10630000FA35EE7D3D7FC6BD1FE6CF47484F66DFBD
-:10631000EAD9F5A19E3FBB3E0CF3E704D633AC6F40
-:10632000FDCAFD48CF9FDC8FC2FCE9C27AAEEA5BB2
-:106330003DBB3ED2F367D74761FE7C81F58CEA5BBB
-:10634000BF72FFA2E74FEE5FC2FC310950CF98BE8B
-:10635000D113FC54CF9FE0A761FED8B09EF17DA37E
-:1063600027AF5DCF9FBCF6307F520490FBC4BED5F3
-:10637000136CD7F327D81EE6CF20ACE7BABEF52BB7
-:10638000EF849E3F7927C2FC198EFDCAA77A0FF4CD
-:10639000105A4F7CCFF5EC39ABE7CF9EB361FE8C42
-:1063A000C67AA6D37AB27AAF6752879E3F933AC233
-:1063B000FCC9C37A66F4AD9E3D1D7AFEECE908F394
-:1063C000271FF97353DFFA35A953CF9F499D8C3F9F
-:1063D000630FD74C75D0723A16BA44FAC9B567DC68
-:1063E0006E81E64527CB8B4E1701BF44D4FC0DD2FE
-:1063F000EA16E9F7F66D89390F9348BFA3A014FA9E
-:10640000154FBDB148BF23212F4EE7E724BA93743F
-:10641000F9E4A201BAF7FB950CD195F79F7BB5AED5
-:106420003CDD93A3CB67944FD2BD3FA8A64097BF56
-:1064300062F50DBAF733FDB7EAF259EB6FD7BD3FFE
-:10644000AC6E91AEFCCAFA0A5DF9558195BAFC357D
-:106450000DFFAE7B7F54E303BAF2D1C18775E563CC
-:10646000428FEBF2630F3DA97B7F7CEB665DF98485
-:10647000A3CFEBCA27B6EDD0E5AF3DB9C7E0E7D96A
-:106480009DEDD7F0BC08B827CCEF4F57D0DF0BC538
-:106490002B985706D8D18FDF1FBF543D4EE5ABBCBC
-:1064A000B2584DA1F20599123AAEE70F28BFB28D4E
-:1064B0003EBF7792E74A277D7EAFE219ED8CE19FE0
-:1064C000523C08240D52D504A9B1FC4199E1B120F8
-:1064D000E3CBE1C7E8F75E53D7F0449AEF2FE6D756
-:1064E000035E9E124C88D33891D4C07B716682F3D0
-:1064F000820733739FF647E075FD20AA874277BD78
-:10650000EB654F1AF8199B6BDFF6831FB26E10ED27
-:10651000D700429E16DE0EF987D2EF072D4DF3D03D
-:10652000FACC0AF5D323DB5768FB23B1FD0668FFDD
-:10653000C51EDA370FC9D3B56F195CAE6BDFA2D0B9
-:10654000F69DD41FA8FD236F9F0A6112212F0B7F98
-:10655000C4F6CD83CBB1FD07153A5F896C3F2EDCC5
-:106560007E10F4771FB43F3E46FF874CD2F77F7012
-:1065700085BEFF0AEBFF2BB5C778FB71D8FF16E18C
-:1065800018EBFFE00AD67F33AB37DCBE23CCFF43EA
-:10659000D0FF377BEA7FD6647DFFAFA8D4F7DFCC8E
-:1065A000DA7FA7F6146FDF8EEDBF2B9C62FDBFA2D2
-:1065B00012DB57CC1E17E047C988AB09D0F6C9409B
-:1065C0006A98FA035C683B908E48A2A026E4516169
-:1065D00008D2716F1CC3DBE771146F686FFCF89C05
-:1065E00004A865CBA5F32E8EF515DBF215B04B583C
-:1065F0004EE72B4B38A9654111F14D369803C3285E
-:10660000BD1D41D10FF9B20DD705C0FE79CD644152
-:10661000097C2791103CFFF467A33647F6CB982EF0
-:10662000A993DBDB22F42D3C8F2A20236A287DD31B
-:106630000104E3BBF31FD37910A1F38B0FE83C8374
-:1066400050487E22B3F63EA2F325C8B7D1F9129482
-:1066500013528BDFD1EA0EA751FA4B38FD1F4B4C7A
-:106660005F3FBE4308F8A97E7EFEBD31384F5DB066
-:10667000DA4699DE4DC7427FB22E4FFBE5073975EA
-:10668000ED3607360BC85F15F8558AAA49C8E2F5FA
-:106690001994D7DDEFBF4FC59E4E597F1B71CBFDBF
-:1066A000E9FB77AE12063969BBB3DDE61C364EB89E
-:1066B000334CA8D724C39447C8AD4D63645A03290B
-:1066C00075CB1FB745B43BB3489F9F5DA2CF77C83A
-:1066D0006ED944E9EA2815C8265AEF9CB9FA72AD7A
-:1066E0001DBB2989C999B75792CAE89B03690E3C1B
-:1066F00076A29CE73AD9B71A3DDEC5329DC2823CEC
-:10670000FDFD08C8D59F82EFDDEE64FD36D23B5714
-:10671000B6B84B683FE72E1403806F23FD7FDA671E
-:10672000739BB269BAFEA7323145F7C748FF3C8F69
-:10673000B13F8D328CC3F3CB8DCF196EDAB9FC3FEC
-:10674000067CD0F404E083D27F9CE3A3DBAE327CF2
-:1067500078CD9E9B010F5D4F8804E5CAF1721BC77F
-:10676000CB923A3D2E08F1C820C76573859C8723DC
-:10677000703087E36059BD1E377712BF9C1E432ED1
-:10678000F3366CFA619A1ADDBF0F396EE63FB21F1D
-:10679000F913DD4F26A7BBB89CEEACD197DFC6E559
-:1067A0007A2797EBDCFAC70E50F3416E570332E8B5
-:1067B000BBF73E4D9E6D3A797AB83C8D74DEC5E5E7
-:1067C00079D7F7983C8DF4B67179B6D55F90C990BA
-:1067D000687A8DF42D581DD51F05E4B9D01F5B9E36
-:1067E000DE607EF2F188E7558D33928F47E8D98AD3
-:1067F00086525D7E79609EEEFD65F50B75E54BEA90
-:1068000096EBCA17AFBF5B975FE8FF9EEEFD05AB47
-:106810006B75E577D63CA42B9F5FFE982E3FCFF398
-:1068200084EEFD397337E9CA67973CA72B9F59B4AB
-:106830005D972F75EFD6BD6FDA77D52D80CF378E68
-:106840008804FC89CF5C27302EF8994B76C13BC772
-:106850007D2AE2BADD3702D3933E17E2FEB42F0F52
-:10686000D38E608B1DC6093A2E2E2589D4CC9B6E03
-:10687000AE5D3F10C66982E3E916D3AC5AFF6442AD
-:106880007E6D5291DFC5F50A098D254480C186D3FE
-:10689000D1254694B7F5525E4F0D7F727479715BC6
-:1068A000ECE7DEC7175EE18C1177E9D65392017EE3
-:1068B0004F27F7BB8DE5950229897C4EC803A8D7E1
-:1068C000E7F8B85BA930FDAFDC915E401C900F0D7E
-:1068D000AFB95C7B8D14E4FD0127593A3D5E567FCC
-:1068E0008DCEBE1388CAF603BC8DD53D5FD170AD89
-:1068F000EEBB33FB45A4BB1A6CC54418164B5E3780
-:10690000811D0EB50C9E390AE874BF6182712AD8C8
-:106910000FFDC233BEA2E4E312C8AF04D393BEB9E5
-:1069200098B6FB3C981EF79563FAB1AF06D336DFF5
-:106930006A4C3FF2F931FDC0B71ED33FF9EA303D52
-:10694000EAABC7F43D5F00D3C3BE064CDFF135624E
-:10695000DAEA0B62DAE17363AAE95D6FB83BC9C793
-:10696000E1D380BF1838EB786055EDFAC9DD383BCC
-:106970006FBAAFD63FB09BCFC5F5668E87541D1E4C
-:10698000BE806033E2AC97F27A99E3B0A7EF6397E9
-:106990007B37FF6BF036DEC4FCCC6F8AB76E3C658C
-:1069A00018F094D51B9EFA89E3BBF134DEE4647ED3
-:1069B0000FC7D38FA01F31E61505E084F48BF0D705
-:1069C000DC3616A7E6EB09D45365716ADEF61AFACF
-:1069D0006E2BFA758111306E9C1FF1B7E110873F65
-:1069E0007FD44C277D3DF7CF88939EF9EEC6F9CD35
-:1069F000D2001DBCC646975BE3185FAD265244E843
-:106A0000B8F6D0B0675C8B46625E2249F07DC05517
-:106A10001A1FA35EEA2B037F7BE3EB9AF8CFB3A1A7
-:106A2000BEF627FF9E0BE97813F397E35A44F4DB95
-:106A300049E86917F0373C2E995D6910DFEE1AA618
-:106A400038D16F08D8F5FCF3D37C6E37FF1EA23C1B
-:106A50006AC571B72E0DF937F4F3E1E97DE05F6F98
-:106A6000F6BD377E2E0A0CF897F0B337FBD89B5D46
-:106A7000246EF5C520ED7FE7BE51390FAB60078767
-:106A8000B0795A0FFCD6D6A58CF47CFF6BE2B833F4
-:106A900055C371EB6042DBF988EBCBF9A62B1340B1
-:106AA0002EB41E9C1F74EDE47E7E2F723D9BA9AF19
-:106AB000CF6BAC2F4121C268DA6EBCA29004426A4F
-:106AC00044CFA322CE6F5C6D7E881BECB3B9D6A8F1
-:106AD000306F3CFD6648851AF5F185F3879E76C0D8
-:106AE0003C6C659AC9793C861CB5B4AA31D3698FD0
-:106AF0009CAF04F5F9F375425123CEE7D48459A332
-:106B0000609C713A8F0F05BB9F86A956CFCA34C5CA
-:106B1000799CDADDD30D59096CFE1760F6645B22AF
-:106B2000DA9BD33E0BBEFFCFA6A7A77A347A0869BB
-:106B3000229F58C09ED3B2AC9EDFEF511FA48B0A98
-:106B4000C43749B3FC39CC37ADF4FFAF8640BD1232
-:106B5000E6B57ABD8DA2DF3C1A9E6FD3B547BF5311
-:106B6000B5B557F8AE67BD9348BB867B2ABF57F9CA
-:106B7000FAF08A06AB53EFC726EAF2DE60BA53E7B3
-:106B8000D7C23FC071AF1124C05F25875FA7645F84
-:106B90000F78DA0CC14398BF08ECBD2A4B9BE25139
-:106BA000515D5A019F8BF234FCAB73FE4CEDD4A9BE
-:106BB000D765027A46BEA454E5F2A920E2CD444C42
-:106BC00034BF98BFBDA86945318C5BA74C6CFE50A3
-:106BD000464A1C303F2E2775B9104F3D4B4C45A0FF
-:106BE0009F67C93B8EB111FA784E54B0D2C5EBF510
-:106BF0007E3C9DDFEBF2CBEAF5F9A5E4D6545807CD
-:106C00005FBA41260101EC86BEFC98E8C47A9791F0
-:106C10009A75306EFF9CC7BB1639899441E9ABFA6F
-:106C2000CD2F7317523A2E896CFCD5D67197273128
-:106C3000FA2B660514377DFF93A6B1B7510B44BFFD
-:106C40000FAC83756D7F29716D25D1F2FBBAF41BF2
-:106C5000E9D5FC81A8F5644E474A83E00EC4B063D1
-:106C60008A24303DE3F6EE6AC9A98B83E4423E22D2
-:106C70000EF28DF194427478DA2C7A064BE3197E89
-:106C8000000F82D4A578BE4DFD6951F55F2DF5FB4F
-:106C900027D63F90D69FABAB3FF79F4AFFD028FA4D
-:106CA0000B62D55FF59B1776F9A93DA978E9670EC8
-:106CB00042C7C953525DAA8BCAB572EB0F1D6E9ABB
-:106CC0009E94FC0EC0EBA98058144BDEABC3F27649
-:106CD000DB0588BBC13F69FDA79FFF11C6233EDFCF
-:106CE0002A3B319ED6600E99A93E56372D2F26D9C4
-:106CF000983FC6F20F9E13211FD4E3AFE2D99FA5A0
-:106D0000C2FE0A8A141E5F0AA13F5BBDE5D3421C86
-:106D10009F4817EA91F13B68FF5212DABF854A4259
-:106D20007439A513E3045ECE176FD38FCE890EF8A6
-:106D3000571BCEDF8DEF9773FF74B9149FD26EA3EC
-:106D4000FF9E4026803DD4F84102CC3F5DF3DC2F0E
-:106D5000B28F517ACE6C79DD2144F049D3A3F38D03
-:106D60008B7FB547EDD9DE76503D8BF483B4F14A85
-:106D70000D72BFBA99A59572C8712DD5FBCA4DB2D7
-:106D8000CB4F1F57BEF0F4334F421CF38F66D73002
-:106D90005AFF8A170EBC3789E6576C97538A5937C2
-:106DA000EC426AB75CBCF4FFD539DD72A878F98093
-:106DB000A28E62CFEF4FEA96C78AEDFB15322A9A70
-:106DC0001F531BF72B6DF61872693C56087EC29A4A
-:106DD000E7FE4B81F8E2A97D02E99F19839F9B0E94
-:106DE000A01F007C4239723985E56678DF4BE502E9
-:106DF000F65A9393B1FC466E4FA03E7524E2F9C556
-:106E00003DB4FDF23F995DD0FFF217EF71403F4E68
-:106E100048350CD7BFFC612AD8AF72D99FEAC49419
-:106E20003D2F7FEABB88B7656F7F3715E349C49D67
-:106E30006EC2B1C79F0EFD5BB27136F66F29F120AD
-:106E4000EECA7F29960468FA99448AB6C7D08B0E99
-:106E5000AE17273653478CF6EF04CC1FC15EBF2315
-:106E6000E2BE2A42EE26A0FFDFE57DA11E02E63F3C
-:106E7000B330391D904C5CAFA8B71989D72D0FB628
-:106E8000827C4E0F72F78775162F91FC9C1FC2579C
-:106E9000B45EF1EDE9FD997C882AE5F2EFE8383F30
-:106EA000159EC3FBADB2DB9AADFB8E7C95D9DDFEA2
-:106EB0002ADE3EA53B0EC6E713A9B1FDD501B2A659
-:106EC000F7749C8EC057847E337DDFF210D36F4DF4
-:106ED000DF03A545507EF130D31FF80EC63F4A5759
-:106EE000A83F96EF9F25A03DA0F3E6587ABD45E662
-:106EF0007AAD2FD77042E996848408BC40FD49C81A
-:106F00007F5C5F59BA817E17612FBDD09E23BA3E48
-:106F10004D6F9771FD3F05FA7F4DB7FE938D4CEF96
-:106F20007BF69FFC2C6E23079E7912F495EAA75FEF
-:106F3000057D954BA0DF7FDDD6F2DEED544FFFDA05
-:106F4000A8E9A9DE7E1AF5B47CC778124B4FFF6A18
-:106F50007791987A4A9FC7D4537B1BE2F8FF94FD40
-:106F6000D4F89728EBF9A7D9C39EF868B4872F4ABD
-:106F70002AF2D3680FE9DF61921B8D3F0D771ADE8D
-:106F80002A7E5D7505D89D302E35DC8571A9E12EF0
-:106F90002A7EABE39FB1FCCF106BA274CDB7D44F68
-:106FA000817984A58BE0BC2B7F9688EBA6968B0419
-:106FB000F5BE80C8B86FF07D53CD78F043A7FCFDD7
-:106FC000B6B3F7527AE713BFCCD6E5EB64F4EBBF68
-:106FD000FCEAABC9B43FB773FECEA7ECBE89CA6367
-:106FE000AE2484E2289DF324E24F4882F8AC403E70
-:106FF0008EA0637EB93E0F7F5352BBEBE9EDFDAF30
-:107000003B0FF9A6E9DB3EB676F52EA443B179290C
-:10701000124FA52057CA3FEF38213004ED529B5440
-:107020001231AF7A9CDB9DB7A7CD1C0FFE4BFE9CA7
-:1070300051090CE783717EEBE5F6EBBC5F4D00BBBD
-:107040007EBE390BE7AFE70F2D8E8FB56FB285E3AC
-:10705000EC005F57E9B40B7522C57D27E942FFC5F7
-:107060006FB792AD31D6FDBE2F9BF8E483CB8DFE7A
-:1070700089546E73390EE7D14F137222E436EBA6B2
-:107080005392235A0EF0F771C43CEBDBF217700DEC
-:10709000FC6DB1B61596C488D7FD84F36FCA2B5F1B
-:1070A000E0FED569CDF912F0719A5DD4C5391ED4D0
-:1070B000F475241909744D7965F9A3E3298EBD8708
-:1070C0004417EC57F5369F533C31E6BB467E42FDF4
-:1070D000E0471E909DC8AF2372C912E0EB91D956CC
-:1070E00002EB96EF2AAEAA58744E37B378C83C52DA
-:1070F000F2D938E1FF3EFEE6CF890F15507E9CB7EE
-:10710000B3FDC0D1F8637A7FDE29046A05C0A1C847
-:10711000F2294200E26485C4F3E86401F5FDFA480F
-:10712000FB951F2C7D01F6D554370B4E132DAF96D2
-:10713000DA14C0B137B85D02FFFC4695B831DE20E5
-:10714000D58C9A1511D73A204BC8AF96BFDD7E2754
-:10715000F0F7C22C3301BADC23CF3960DCBFD03C5E
-:1071600016F5A0A77EFDC147A64C93A01E82F8305D
-:10717000E2A130C5A6CBCF9E4A06BAA8DCA698DB12
-:10718000EE71C590DF3285E1ACCFF6CDF2FF997D8F
-:107190009B4CED1BC3B51C69DF462B51F6AD7F2C14
-:1071A000FBB6B256ED0FB858B937AB3FC875E56BB3
-:1071B0004BFAC5B26FAFFAD8FCFD35BE0FBB7320DA
-:1071C000B56FA323ECDB406ADF62C46DD315CDFF3E
-:1071D000ECC5BE59FE77F4EF55B06F31FA3B52D192
-:1071E000DBB7A2E65AB46F450345DD7EA82C85CFF8
-:1071F000E77AB46F0B7F361BF3B2CB16033FC05751
-:10720000B06FAF713B07ED809D5BA438B1FDBEDA76
-:10721000B9D2BEDAB9FF253E6B766EE520769E23A5
-:107220001A87CCCEADCC64766EE55E66E7560E630B
-:1072300076CE68DF0AA2EC1BFBBE7A04FD1EE78B4C
-:1072400099BFB8839617CF955D16FA7EB1AA9D5F58
-:10725000A8191F69EF162912F239CADEB9CEE13931
-:1072600090DEECDD5B60EF86A21D1B0A7A64C4C76A
-:107270000D436DBAFD7247BE68FFF54BA02F7F101E
-:10728000719EFDBE89CD8BF67DD13E16F46E37A77B
-:10729000E75185C9B3C3E7477B3A7524D3F7AA43BF
-:1072A00071384E543709ACBFF70B0115C681BF5D6D
-:1072B000C2F9F29D7BD97C798E99F183FC9BC8CE73
-:1072C0005D50162C8CC0C3DC4B1518D79C2B110BB2
-:1072D000F8AF0B0EDD700AFCD60597D6A3BFBB0036
-:1072E0009EC3BE89ED6DEB3268BB772E1770DEA1B1
-:1072F000EDEF9817B6977A3F767E73EC7D1A533888
-:107300003D53EE1302B02FA7B77D102F72FD9B23C4
-:10731000B621BFC85B62CCF8A4F65E984F2EC69724
-:10732000AA55CC6F0EF389F24D15A2F944255DBC28
-:1073300030B59B2F77EEA4FD4DE9B9BF1ADFA2F758
-:10734000E1B8713EB380BFD7131F343E47F59FF3BA
-:107350009DFAA9B89FC7C88F46CDCE5C4346815ED3
-:10736000BE6FF23C3A1E70F49F942F94CEDBE60D74
-:10737000D39DE7D9C5F97293E7D8B45415F8486A94
-:107380000067B7976F3F904AFB778B3B330742E626
-:10739000B3FFA67820FED062ED423BA8E130CDCC11
-:1073A00070F8578EC323039CD370BC090A4ED4AF28
-:1073B00090C1CEF17D645ECA67D05F6F908F4F142D
-:1073C0009FA09F85DA780572A1FFBCA999C9C55B0A
-:1073D00023A05C6E265D0781EFD529822B44AB2A62
-:1073E0000C6EFF21ECB77AD54A9F839E970BAECDEA
-:1073F0008C1DF6F4D498389662E1183709468C9BB8
-:107400000BE0BD24D8B768C6F6EFFC1EB347463F75
-:10741000658AB9F508D033E5DF64B2091E06E87F56
-:10742000113830FA31517AF035F7FDA472FBFD2A9C
-:10743000C8C10EFCEE52C01FF286D8F8A3957B257A
-:10744000751AF24D9343908E2FE3981C60A9DFC804
-:10745000E75BB43CE01FDE6F1664F87E06954F32A2
-:107460002D9A6AFAE2A08677B31ACD2F8827A4470F
-:10747000D80DB06F91EB96D5C1B7914F37ACA2EE56
-:10748000991ACD274D3E60072FC7AF28FD09EE8F13
-:10749000B97FEA9BEA4F9A59AF3FFBAC5DAF8F864D
-:1074A00038DA5E01ED0A694ED4C50FF2CC6C5ED6B7
-:1074B00062F520CEBB5E935D9BD568FB7315970B81
-:1074C000CC5722CFEF4D850EC1BAB1D34A3ED1FA87
-:1074D0003D84E12C723C78D5EA41F9F554FF045E15
-:1074E0007F4FFE9896FF0EB407FB16557D7BC6F1C5
-:1074F000488B27F5D6AF6966663FBE69BFB476BED6
-:10750000EEBA8397B462FC4D5B7FD82C7A7E2EC393
-:10751000FCB848D0AD7350CA71FDF29F50FF58E5DA
-:1075200032F543FC2844F9FCEAB6A7315E7DF6F952
-:10753000633783FEACF8AD482C549F3AB6C5931020
-:10754000DB07A2809F50D124E27A169142B93323FF
-:10755000FC0C42D6307EBC148F76A7628739504C23
-:10756000BFAFD8F54936C4DD3A1E60F6CFFF3CC741
-:10757000A3BF2D1BD6FB2B24B68E6F94CFBD1C9FB3
-:107580006776DBE682FD161AD879D78AC639B23912
-:1075900022CE506596595C7BB70DF759FB9F13704F
-:1075A0009F32D01779CE52DBFF79E63966972B826E
-:1075B0007200CECD56346CEF803878C55133FAAFB7
-:1075C000DE86730AF8A7535F7A01FD236F50D4C596
-:1075D00041A3E28F0D62C80CF1B3A62AB403347F35
-:1075E0000CF38DB1E3F0BDC5C956BCB477979FB21B
-:1075F00070C5CBCF3AF0DC6CEB5607C6211B2E1FB3
-:10760000FF8F8A37363E74D978E3698E8F5F99F59C
-:10761000EB35A42119E39094BEDC9218718B30EE07
-:107620005FF8EC29580F3BB3E3AF4F01BD95FFB8AE
-:10763000F0D47DE08FEDB33A61BCF63E7F04D71302
-:10764000B4EF76733DEF78EE595C87E9F8A3D9057E
-:10765000B575EC3D3118D6233AB67F910A71DB55EA
-:107660007BA7E33C6DD5CEA9FD498C798096026E4F
-:10767000037D580732CAABA5A96530D07996CA1BDD
-:107680005CB670FCB8B18AC5E3551E37DE167BBD0B
-:107690002D2A4EDC34F396EB60FC6E925D2AE943B2
-:1076A000BCF83095E3E83EC86FDB439ABD8F29BF35
-:1076B000B3F00F2AA7F70DF2FBAC69C9AF9E84B2F5
-:1076C000A6E41EE3C5A13EF04D5BCFDB62767F6C86
-:1076D00006BDD9F16B8CCF83DCE85C8374BCF0D938
-:1076E0006088B39C94BBEEC2FD337BCDB82FAA62F9
-:1076F000EFFBA83F1D3BDFC6F532C2D7D53A48F8AD
-:107700008FAD83F0399C774B3C8B3373FE431C5A0F
-:1077100075E0731E6F6638D6E2D03DC59FD32D6CE1
-:107720003F91B6CE58B5E5CF0A31C4F5853C90D32C
-:10773000B1CBAE8B6A7C70021F2644AEA7C48EF319
-:1077400087D7DDB8BC407EE07F85D74B687E20C4FC
-:10775000CF03C2FB24863DE8D8C4D6613AE4D8FB07
-:107760000FB5F595148B414F037D5B57E98DFEAF47
-:10777000CB1F19269BE3A3F974E6CBD8767C824510
-:10778000F876FB612A85A8F57F0BACCF371D5360D7
-:10779000FEA18D635A7FCFF079F299E7453CEFB1B6
-:1077A000AEB105EDB8D15E5413161F34D23B83D36E
-:1077B0005B1D64E3C4991DF1013BADE7CC2BBB110C
-:1077C000CFD5DB8E297E5ADFC1869795B688FD52CC
-:1077D000304E0422E83FF3E2FE6CB67EC4E6E5C616
-:1077E00076E6F076BCCDB1DBF16E3BA76B6785BF6B
-:1077F0005161E7772EDFDE69C93D07EA3BDD2A13D9
-:10780000D8BF7FBA512C0AC4687F9245D6E2F24CA9
-:107810006FE87889E71DE3D9F946314941FF7A5588
-:107820007CDED18414481515E2146B6AD9FED2357A
-:10783000DF77A581BCD724DE86EB6D7506FE3A5353
-:107840009CF910BF704E2B19077035DA9B44B7496D
-:1078500047FFAAF8A2FE701E7F2DF7C788E4C2F387
-:1078600097A2A3B008FA233A4D4E6B8CF505D95E6A
-:10787000423C117C919DFAF392E4CBB12AD4A3ED62
-:10788000A3A9B4B41EC442A71BB70A4B79ECDDFC14
-:10789000594EEC77E7363E4F7013D599CAF683C13F
-:1078A000B8D1B923219B8CC60F899BE2D1C69F0B0F
-:1078B000DBF6EF077BB4D641DC8954CF285755312E
-:1078C0000BCE8D8EB1085980D3736FFE96D66B6D3B
-:1078D0001671FED069D7F685BA1341CF6CE411DC7E
-:1078E000FF0750FE2AB99B4EE3BE4002AFA476DFED
-:1078F0002B315DB4E3BCE7FC46160710C9D5BF9831
-:10790000CCE2702400F4F3F16405A7F33CA4F07E0C
-:107910009982E73A96BDF6726E88303944F22BB9F7
-:10792000487FBEB4DEEAC8867579E277B7C2399976
-:10793000325E5FBF12FDB953AA7E7ED0D3255C4F65
-:10794000FFBAB4F010D8BF32CF52B4EBFDE7EACFA4
-:10795000A51AF75921BDB02F8CEADD9342F4BEABD6
-:10796000F2E6C7D6C17C397AFF151901FBC92A484E
-:107970009C0BCEE7AC68D097EF03BB7915B093D8DA
-:107980002F17EFEB95BF6DC37F3179DC65F9EB0AFB
-:10799000C1FBDBE231AEB2ECB5C5689FCC697AFEC3
-:1079A0005A553D7F6D238C7CD4F339DEA5E79B3699
-:1079B000FFEC89CF0979FAF3BE463E4B84C71B0220
-:1079C0002C0E11B5BF2DB809E936F2D9C8D7760B00
-:1079D0005FF7E27CA57F25965466B281EE74298418
-:1079E0007A61D4A30C7B48807F0F4A09D4E257AE5A
-:1079F00078B4EF69BC3F4219FBCE067A2402BD2E53
-:107A0000D42338D10776DE463E70B65B41589F904E
-:107A1000AFAEE9599EF794FEFED822FAD546C0EFE4
-:107A200068D42B766E378904D664829EBA9C306EF9
-:107A300037FA2C6A9904F79F10B56C28DC7BE2C4F6
-:107A4000F4C77C1F4AE74882FB821B431753C13EA1
-:107A5000FD38A7EB66B07BDE25A404ECE0CD716CAD
-:107A60009EB298A77FB72ADCAE4E7BED7AF8BE595E
-:107A700056E15C7867F356CB30C80745BC7FC49BA2
-:107A8000587715B4DFD12C33BACA2C816110BFD816
-:107A90002B63BB1D6593F17C65D86F6B66FB403A29
-:107AA0009B3F712C8EB0E71DC19F5E05F1AC274C4A
-:107AB000B1F79F0CB79AF8FD35DF70FC6D8CDA7F5B
-:107AC00037DCCAF6C7FD7808ED4775E9793E0E3315
-:107AD0007DB896CBF9F74B6FC0FEEF6C1654184784
-:107AE0000AC53B6E1C45FB39F188C4E3302C2E39A6
-:107AF0008EBFBF9BB8D2801F13AF2302E8F3C43FF1
-:107B000012DCB735AE6629CEAB7EEBA038CF8675DA
-:107B1000528A5BB07367ECE8BF8F6F9574B84C9C6A
-:107B2000E6698179E684A304EDED84A3FAF23C12C0
-:107B300010B19D36FDF36B4FEAF305568E6F074982
-:107B4000057C6FF85244BA3ABB88EB015A6F67D98B
-:107B500000BCEFA6F3229CDAA5E9976251AC717ED6
-:107B600026E081F2EB0985E0F8F2C4523BC6EF5FF4
-:107B7000595A71058CEB9F7FCF7345AC73E011763A
-:107B80002981EDAF722750E229AED70A8CDF75E963
-:107B90002531F6EB6B38D670ADE1397D699C27D67F
-:107BA000BEC40FADCC0F29583A4250605EB64F208C
-:107BB000C0D78E073C973D37E3270F64003DDEE0DA
-:107BC00005F4B32DCD823B969FB1CAEA60F3BE07A0
-:107BD000FCB5B01FEF5EAA94601F7BAE7703CEABFF
-:107BE0006E87A02B7C67A95B88E7709758C866886A
-:107BF000674B75E9B7C603EEA7CE5847E97DB2C417
-:107C000084727E427621FDFE2A4230BEC0E3B50377
-:107C10006F269B22CF23FFC09AFFB095D6FBB0D52D
-:107C2000897249F6B804A0DFF5DFFFE500BDEEBCC0
-:107C30006446390EE0F31FEDBBAD9C4FA3E3DC6B54
-:107C400001FFA43C05F5C3E571A865C9702F01E5E6
-:107C50007B8C7554CD2F4DF250DB46E949B29BF039
-:107C60007E2EE276AB4E6DDF19E1EF45E8030909A0
-:107C700004F6A569F654681642F114FFE32CF610D9
-:107C8000CC3392CA69BF2909566261F5B54A67C209
-:107C9000E7AA719F3BC5652E1C6E22B8AF0D36D288
-:107CA00042FD9A9DD5ECF3DA4482F666ED635260AC
-:107CB0000DAD67A3D46685F849A65B2D80AD444918
-:107CC000928AE7BD0795337DB465FD3231ECAF5044
-:107CD000651FF30F7141ACF5BA8FC3FCF2BC00FC19
-:107CE000CA3ED4F50AB8352E2B6BCF75C082FE790B
-:107CF000D86E703FAC908FBB133F35B1FD02A1EB46
-:107D000071BF9DB68E66B41B540FDE1541AF3E9514
-:107D1000089ECF75D3FF72B52D7711F6838F93B977
-:107D2000C19A16F4DDC4912D80C76B5FC7BB38A222
-:107D3000ECC884373C6B80DE6F6A3F8C781813A2E6
-:107D4000FAC8E53352857B2A9CE13C94B75AF9FC8A
-:107D50008EDB9B94D271FDD1AFE53833F257D36BF4
-:107D6000A3BEE7AC76B598B1D60032C1D80E11BA31
-:107D7000E950B3C01EBD21827FDF994FF142E9BABD
-:107D800017F40EFCF38B8119809B0DCDDFB1827E41
-:107D90007CE3F1A3997E1DB1BFFA27A2A7C3CAF65F
-:107DA000873B800FD5FB2FF2F12384720ECB95EA2F
-:107DB00047643C44C3BD11E79A5EAC810B33B2F01B
-:107DC0007C1C01F98842230AD64C363A81AF9A7F4F
-:107DD000BD26ECCF26E2B99E554ED6DE1A59F3CB1E
-:107DE0005D16E8EFAAF882FE975B17F55EA2F3979F
-:107DF00088F3305EA90BE767DE4B0A09247F0B7E10
-:107E00000569EBB93A7EA5C4C5E05707E8D1F8FF8C
-:107E100027FB936DECCF836A777FAE259EDFB6514B
-:107E2000BB907B4F7D3AC305399C16890BBE5ED94A
-:107E3000937EE751FD06D72D4A9F0D7A3CB199EA12
-:107E4000B1295A8F5D7209DE5BE7DA6B437B67D439
-:107E5000EB8BBC5F5E1BE37B8DE8991107F37153DD
-:107E6000D760C05DB64A928B29B1D94191ADAFB60A
-:107E700026EBC691E8F1DD8F7652F32F35BFD2F8AD
-:107E80005ED8AFE4E38616CF148214FFB4DFF7C7E1
-:107E900079E6015FD738D9FC130E9A82BFFC03AB99
-:107EA000E70EA0CF46FB1007EB1A2342992C5E1277
-:107EB000D2E95B4FFA6533E84F6348C271CC4FC7D4
-:107EC000B16142CFF4F48B4B64F452AB027ECAC072
-:107ED0005CC21AAB26B8AF7B6036BB4766600EBB90
-:107EE000F7F1DFE3D87ACC7D716CDCD0D21F584B30
-:107EF000EE817EC912F19B73BE39DD402AC40FEFBB
-:107F00008F73DF0DFCB014B9B11F194EE21228DED9
-:107F100032A44601F6372455AA028B1B1236EE40D6
-:107F20004AEBCB2856F361DCCAA0B616E22019CD85
-:107F3000B1CFF56C8893BF5DBCAB29EA3CCA8638EB
-:107F4000E66F1F54687F938BD9799470DC86920F0B
-:107F5000FCED88BF0D3BDBF1195B0FF527323E1BB3
-:107F6000E75F2030E897C4F33F5488644DC2F9912D
-:107F7000DF04DF992C383FB2115723D8CF97E2584E
-:107F80005C759DE05A0FF99F485D16B86F47C3FFB7
-:107F90008F27DFEA92E82B8EEBCE67C39C95EAC36E
-:107FA000F320AF8EC9E787AFC51E740D6678738B5B
-:107FB000BAFDEF9ADC82B24E6E56888744DAEB78CF
-:107FC00005E7F71D429C0BE6431DCB0546A760E184
-:107FD000E703247D9C86DB436D1C78272E13E9B7CD
-:107FE00011FF18BC1FCCE2B2003D1AFDE173A4865C
-:107FF000739EC673A06959E1B84D3AEE932D51E0D6
-:108000008E2F72BED986FE97D7C1F4DF8887FE60B7
-:108010003C2E736E92F2AB15E4DB5FAE49047BDB62
-:10802000FFCEE30E90AF910F9D827FCC4158DFFAD7
-:10803000831C739F8896A6A50D28057F342D3D0DC2
-:1080400053ED79BD5D8A19073CCDF5EE1BE3B59E76
-:10805000580CF3C3D3D09FB39E77DE73A3BA776176
-:108060007CBC3E8EF1BB5ED1F8A826809E75E75D94
-:1080700009EC7E924476FF9093C97383CF522A49CC
-:1080800091EFB9D11FE947DC33E68111D82093ADD8
-:10809000886B16BFD1CE655043C7E497C8E8FAB9DC
-:1080A0006F4C29EC9F916DCC2E5DDC301DDB4B2598
-:1080B0000F588753BE2E2D31B920AE7376D19F1C39
-:1080C00070147C51466B2EE0FD88E8916DE331D44D
-:1080D0008DF3B76573954088422AA59E1A2426978A
-:1080E00019B8EEB8D01473FFB3DDC6E6DFCD714E1C
-:1080F0004CD3D20697968D8DCC0F44396978A47AEB
-:10810000985E36AEFB9C30C5470AB46FD4A74E9933
-:108110000461DD40B387299CFF9A3DD6F42105F424
-:108120000CD6014BA87DD4E43984BF9A8AF14AFC6D
-:10813000139A5FFD02E6038EEB0AD0DE51FD5F8FDE
-:10814000FA3282D96F2BD8D3883865E7DEF707C1BA
-:10815000FADF87DFBF100FEB407F91BAE2C17E9E4E
-:10816000BCFFDD783837F4E1FD2C5E7197611E3578
-:10817000C1C6ECFAA3B6926CE8D702DF7FE77A2299
-:10818000704956B3758DE501D1709E5C7F2F4F55B8
-:1081900063B2E19E1E3FD65BC5EFE732CAA192CB28
-:1081A00061F9B64D4A860AED7BDCB67E706E8FA013
-:1081B000BD3CD9148FF3118D9E45DBC6283077FA6C
-:1081C0004BB399AF7FB7CA6C5C7017C37A9687F3CD
-:1081D000CD48E7C17D36AC6FC9CFD8FE9485B4AD2C
-:1081E000D5D4BE7A9AD9790B633F967CA816F6A7A8
-:1081F000C25BF29080F36278FF7E3A4E79563F88F8
-:10820000EB5EC67E1AEFCD319E5FD5E653CBB8FC50
-:10821000CB8807F52FEA5C6B335B9F36C6FFCE1F1A
-:10822000CAB261FF6D3CFE914B26C079E81D87867E
-:10823000245CEE3EE533FC1E26B8571AD2933E82EC
-:1082400069B64D65F76434BF7D2FE0AA3AB81DEFDB
-:1082500019FBBAF6A6AAF99403F6306B7687FA9161
-:10826000AB013FA44CD0F997D59B2E286CBECBF820
-:1082700070077F7E07F4371BF659AB3F9A4CE57CBD
-:1082800047A57C31F21E32BF4D7FEEA6AFFDD5FA79
-:10829000A9F55B2BAFE2FBD18CDF69F8CFE6782C38
-:1082A000DB52BA6E0065D19ABD2706F3F368784EAB
-:1082B00047C397113FCB484961BA108193E647B154
-:1082C0005F9A3CCBEA16F2FEFBD3F8BA5E1AC48F73
-:1082D0007AC38D111F1D72DB60D067233E3A7AB8D6
-:1082E0005FE42736E62794A9EE4288675137769DEA
-:1082F00033C24F3929D51DBC0FF46C0BC379C4F8B8
-:10830000CB9CB9D7651CCF57C6ABFDE13E3D94DB96
-:1083100044D81760F6C37B5A3BED3EB76BA8047C8C
-:108320002FC2F4B4AFC435746877F9D2272E38C0A1
-:108330008FEE1C41308ED311AFA7F7773611E9F9D4
-:108340001D9743A5D4FA8F3F838DDAD28AFB1DDABD
-:10835000BFE471A02FCD45B1FAF927FE1DE1F786E4
-:10836000DDC5F54C9B972CE072BBAB99AD672FDA5E
-:10837000588AF230EED77A43701666D0AA3C8D63E5
-:108380001490BF513E4B5CDFC17D605172228FF073
-:108390007D011EDCA753562F62DCC328BF7CBB9334
-:1083A0009DA3576B701EB7428ABD0E79A5DDF4B54B
-:1083B000FA63ECC7C22601EDA491FE655B6AD70D96
-:1083C00020D07FD6BFE87E8406A25DE2FDD4FA55B8
-:1083D000465C78FF40D4FA50DBF524723FF5F2E6B4
-:1083E000C5B82FBF9AF69FB03812C68534FA357AD1
-:1083F0008DFD2814CFC81688E3AE165C609FA3EFEE
-:108400002773EBEE3F5CD8B07F20C8AF5D62FB66A0
-:10841000DBFD02CE0B3B3F206C7D60BD80EB693DF8
-:10842000CAAF99ED07EA598E350ADCE757B651888D
-:1084300029C765F5F9AEA111766A7960866BA88EB9
-:10844000DE46DC1FB2A2A154F77C809DC793B8FD25
-:10845000EE4DDF484D62CC3893A65F9ABE69FA971D
-:108460006F57D93C470A1CCCC804BBFE18CE4BA89A
-:108470005DBEDACED707E6D157AA9FB8A05B1F58DA
-:1084800092C7E4B3442CC6E73DD957CA079D7D1E69
-:1084900067D7EF7FF8B6FDD1FAA1E985D63FA35E95
-:1084A00018F9AFC5D58C7230F21FE882F9C11B7B79
-:1084B0006D810704D07746A77FAF15E9EC482B7094
-:1084C000C139C83FC00794CEEAF4DB315F239694EC
-:1084D000DA715EC7E74DE3FA163FC8E17ED64EABD0
-:1084E0007B2C3B4754920CB89852DB36D3E2A4F86D
-:1084F0007C647421DC2B3AE5B1B69910FA5EF2C8BF
-:108500009842B85F7ECAD6B6772D2EEAD7D58E2D83
-:1085100084FBE55780DD80F60796DB10573DE58943
-:10852000E7F27995BD3FCE5C329FDDCBCCCA2B29DB
-:108530008F2D743CAB3C3CFCF7A09F95ADC545101E
-:10854000B7A98488371DCFAADC8E902D9B8DE79329
-:10855000E87BDB6C9E5576F0EB2EADC5F1ADF2B04D
-:1085600084FA440EB1B8A844FB6AA5DFAD8DA37EA2
-:108570002FE5EFDA248B0BE6AFF4B91FE6B56B936A
-:10858000DCAA1AF15C931F7C0774AC35B175FBFD56
-:10859000AF0D4F68BBCC78BFDF4726C33CA4C5678F
-:1085A000C1D4589EAF38F17C44BE89C5358CE5BF37
-:1085B000D2EC2C51330017D5871416AFA67FE04FAD
-:1085C0005611A617D5849DEBAA3A4CF01C4BF5A189
-:1085D000423CC702FBFC3FD6E1F05F738EA51B5700
-:1085E0008C4F059230598AC0F534BB559717FB9BC9
-:1085F00046407F8818E78273186286A96607EDBF38
-:1086000078054D293F24A74B84FB5AEAA64E11E179
-:10861000BEA93532DF3F6262E7CCB5F69A387FB447
-:10862000F4B4BD6407C8FDEC5BADB936B67E81F32A
-:1086300061ADBF6B04371160DE7580E0F9809C147A
-:10864000D202FCB311771EE0ED3D7B12E7375B37BA
-:10865000A67F1990BACCA697558AF7571F5984FA66
-:10866000E04A30DD9349F36FD997B17C86E9422621
-:1086700085F0DBF67296BFC6746108CDBF6B5FCE26
-:10868000F2B0C04907B623F68A42FF486887E37D07
-:108690009BFB1AC0B76462F117E91505D753B47D87
-:1086A000216BE9440BF0F81ED84D88A7D416FCDAEC
-:1086B00006F1EA02B70AFB3D36F37B83BE69AAF1F5
-:1086C00055B49970FE0329F0FF43CE4F4D2EA4C937
-:1086D0007D0DEC8B258DEE6B601DEDB4DDD306F6C4
-:1086E00066EC1BAD53C07E37BDF3A75CBC9FFC0A94
-:1086F00056CFD837E89C90F6E7EC6F066D8A5C8F12
-:108700003E6DCFFF14BEA36240FF54509DE40EAAFD
-:10871000876BDC4455B260BEAC9F2F3611669FB6A6
-:10872000D94ACE825CC9C0108E5B45F6924EC86BAA
-:10873000F69CB426F5695F9B92BD5A847139292352
-:10874000787411D8FFDFB17B3D04B71BF773BE14FB
-:10875000BED78CED0FB1C1FE10D07F1749F3A7F241
-:10876000F8178B2F9394DC887930EF07FD7E1AEC95
-:10877000379F6063FB0768BF44B0AB63888AE958E2
-:1087800088676581283D98DF431A8FDE47EB7FDCE1
-:10879000CAE2499606A28B0F66C7B338CB4C078B4B
-:1087A0000FC6C98DB782FF10778E38C17FE8FCA550
-:1087B00022E1FE22C97923AE8F1D3411A0F7593969
-:1087C000E084F599AEAB247533E9AEAF93CB5BABE8
-:1087D000F77145BD0AE272731DCC3F7D369FE07E86
-:1087E000E8AE534A00D64D93322C3591F19F2BF9C8
-:1087F000770F390B32E321FEBC378E40FB13F6C5F1
-:1088000099400EBFDE9663053CBC043CA27C483216
-:108810003BEF86FA922E507A33F139DB272FA9638A
-:1088200012287F27DD6057E1BEA967AD8D37E07E56
-:10883000D0174C78BFEE4B8AAB14F22F9D579D603A
-:108840007F9FCD6C8CC3FEBC60C2FEBC14D775F597
-:108850004A4AF7C323587C4AB21109ECB2642A5041
-:10886000EFA6CF73E3D93C49B3D3CBE399FE3C2EBB
-:10887000103C0F2099F2517FB4FD3A9D5D04F7EB57
-:10888000F49BD52A028EE34AB5B851488478CFE4E8
-:1088900012827EDB64BB8CE772607F309C1B9BC2C4
-:1088A000EDEF940F2A713D814AE030DC7FD962E719
-:1088B000F768F175C5EB394EAE236D22F891D75D9F
-:1088C000222E88075D7F498AE9474EE7F53E23104F
-:1088D0002981BE977F51950077F944EFE74DAF2F7F
-:1088E0003C05E3E0548BE139F889488F1BCFF74F03
-:1088F000771AEE4F8EE7F3D6C16470E43E316D1DFA
-:1089000068BA38F209F4538B1417F065BBDDFD3EED
-:10891000AC7BFA5B6572B938E2333EB69F6FC4A593
-:10892000385CFFA1F8B4032EAEAEAFF35B69BFAF06
-:108930001ECAEA071C825DB9F29729C960E7CDF12A
-:10894000CCDE68A9863BC0973381E1CB39BA5B3F67
-:1089500057C567E27B9ABE01EEA09E3D72607EAC79
-:1089600075658AD75580D7ED7682F3B31FA55BE690
-:10897000829E69EDEC8967F837A6EB6A57EE87753A
-:108980001DFF676CBC9836E0921239DE7FE86438D0
-:10899000F3AA75336FA6FDF3DA655CBF49E5E78B93
-:1089A00022F1921E81170D771D7616EFD1F03375E7
-:1089B000F7BB223C9FFA1921CE4C129E8768F8998A
-:1089C000E267389C72888D13BDE1C7DDE59C06E641
-:1089D000310A3787186E0A283EF0F7B77AC08F1130
-:1089E000374FF58A9B2FF13CFCAABD532FBB6E1865
-:1089F000F4E9F77D1AD389B6D8FB828F727EEF56E1
-:108A0000EA6ECC067B7193899D7F9348C6AD14E7CF
-:108A1000BBE3B47BE56BB220BF5D62F6677BB31945
-:108A2000EDCF76BBC78371D7340B9ECB2692A70DB3
-:108A3000F6F5BB0658D4C8DFD1F82EC761A31C9A3F
-:108A40007802FCEFD798FCF36ECA811BEC487A19C8
-:108A500093C3B893CA2611E2428EFCFD80AF4FE06B
-:108A60004E2DC0C37105EF25AA3EAEA05DFCCDBE64
-:108A7000B70B21BEA9ED1F9EB0E7EDC28291F03E7B
-:108A8000C3D96BDCAE6A793C4A0176D2702FFDC443
-:108A9000F07926FDBDF225809FECEE72E37DEB734D
-:108AA000E084171D776E6D734D07B360BC6F7D4E0C
-:108AB000889D1F9B7DD43D1D4C65D47DEB1C0FB75D
-:108AC00091D65D7162F4FDDF747C3E160FF1FBD729
-:108AD000430AC4C11B959A6BD87CA2260BEC8FA6C7
-:108AE00077F847F9D6F8E108DD7DFFC3F8F8F38899
-:108AF0004B62F738B529B84EF82861DF35F271EBD3
-:108B00002BAEF739AB5E9C0FF6706CB91BD76D5767
-:108B100039457CFE1312B26481BC5C12AE7734CA54
-:108B2000EAD41342F77B442A1961A7E57BFAC58D85
-:108B300085F6EF70784C0EF02BA4AE43F0DD84493F
-:108B40003963C16EDBC7AC4D86714CA39BD255B463
-:108B5000D5DE4D87465727C7C91D8E8526C778F6AF
-:108B60001DD8A1E0B1760B7CAFE1A071EF3926FFF3
-:108B7000083C80FCBBF1202C80BCC6071B4FB5FC19
-:108B80003F1F0FA181209F1EF1007108C7B7C2438C
-:108B900016F055C303F5D7AE02FE68FE5AA3C2F61F
-:108BA0001D6A790D0745F67C7CCFA510DC3F44F6A5
-:108BB00059D9396D4F22AE57BCEC646D747ED83EE6
-:108BC00098BA9864B283F9EBDAEF898C0909E8570F
-:108BD0008EA106E10EF4E306A23D74717E9176410A
-:108BE000807B37716F7906F897A164D08B31E6E20C
-:108BF00010E07F876D4A06F88739B6C95980AF5DA6
-:108C00002356BD0E43D6AE01E52F6F51BBFD27CDD8
-:108C1000EEB5F06AB5F66F7430FB74BD9B9D0F0224
-:108C2000BB1D498766FF412C4087109A63FACA86AC
-:108C3000F6BAB90DEC39D041F9BA5F204DE01FE426
-:108C40009BDC2953C1CFEB179280CECEBD5F0C8643
-:108C5000386571F3AB4781DE626D3DD4A55F0F359A
-:108C6000FAD19ABFA3CD2B347F489BCF82DF04E596
-:108C7000D9FCB9D3CCD6AD26872C786EF9F1F3EABE
-:108C8000556EAEBF12ED4731EFC72DA415E9D2EEF8
-:108C90001DB999F3A3F8109D876643392137513EDA
-:108CA000DCC4EF1DB9C9A5BF57E196BCD8F78E68E3
-:108CB000F5F4F6BE717CB8D6B06EF46DD3433E7653
-:108CC000CFC87FFAD83C77D210D12FC1809A97CEE7
-:108CD000EE6970323E1C52628F57FBB9FE4E32B5C0
-:108CE00065C3B9E5FD7BFE8EE3E32B7BFEFE1EF83C
-:108CF00089134F4904F6B54E3A352E01D7E7F3D222
-:108D0000703D59ABD7FB69938DB0E7881FED77575E
-:108D10000E527ADC0AD067C1F4B7671EFF29D477F8
-:108D2000F1B84422CF4D142A9EA110C72DE4BFBF35
-:108D3000735060FE92567E90FFEEC5F31CB7B021D3
-:108D400042BB8FC41C21E79BF83D199A5C6F3A59CE
-:108D5000744ACA8E960FFCFD33E20B5A5CA199F35C
-:108D60008FB4FC11CFB77CA7E96E09FCF3EFA4899F
-:108D7000C41DD1EE0C95CEE023E21C2F3B0C7E4AA5
-:108D8000CB733FBD998E2BDE3744DC4AE86DDEFEA7
-:108D90007A36E45BC598F78F18F9FB9DE6BBF1FEC8
-:108DA0009121092AD2D35BFB93AEA638190D722705
-:108DB000CCCFCB65F77718E5FBCA9EFF486E1BD971
-:108DC00033BF7B92BF510EBF3D5380EB4EBDC9C335
-:108DD00088DB7DB49F7EDABF10EDA79FFA63AFF802
-:108DE0009C98FFBD2F0DF31A5EBD7B9F4E067F4EF4
-:108DF000C3E9F464869B89BB7F9A4CECDDF232F2C6
-:108E0000ED7307F36BE610D7EC9BE93F770AAE787A
-:108E1000B4177ED20AFBB34A388D730E17A2FF41F6
-:108E2000F87910E33836471C89E7DE7BFDDD9BA12E
-:108E3000F932985BE37805BFC702B8368E53456FA9
-:108E4000D449E0B2154AAB981DE37EBA469751CE9D
-:108E5000474809F6A3273A8D3830D2ABF9E7DAEF65
-:108E6000C0507E4C4FA2F5DDAAE663FFA2C661CEDC
-:108E7000979EC6DF9EFA959CC0E3DE1CFF174E4E00
-:108E80007B0BD8DB93BE19E5662CD7EC47213490D9
-:108E900083A91FFC912109A9A80F859714E2A6E3D5
-:108EA0000C19A83FFF4E8AAF40BCDDE364CF7AC205
-:108EB0005BF52513F12477E34E0E3E6603DCED9659
-:108EC000EA6C101FBDCE5EBA06546FDAA705B3F088
-:108ED0009E8736138190D9F4E6732D1047F01E2536
-:108EE000783EA0A079FF54C0E9EFA5569C47755E77
-:108EF00024E4B1083F33D8BCC6067E5830859D6F48
-:108F00003B984874FB90F72730BC068F9FBFD91D54
-:108F1000A3FC122F9F49DC29D9382EC763FCA3700C
-:108F2000BD09FB3F4D701D4801BF659E80F385CE96
-:108F3000BD130EA4507A3BEE4C443B333DF8E0DDCC
-:108F40004E2A88C6FF1E8BCFBB160A78CF40A1EAF7
-:108F5000C27C615926EEDF98F08FE499C5503E43FC
-:108F6000C6F9CD74B1528278D4D9342107E68B7B0F
-:108F700084B65AF81D5C7F296B8738FDC930FF7CA9
-:108F8000A738790CFE769CAAE587E1EF0312C33C73
-:108F90006DD5CE0BFBCDB47CD56C01F7EF4E77666B
-:108FA000107F047E0AD753798EA5B86CEE5F00B8A7
-:108FB0009E59A43F3738BBC4460291EB168213EF8B
-:108FC000213BC8F7697709FC5E7CAEE73770BCCF00
-:108FD000999BACFBAE94303FD3BB5364F771E4B3C1
-:108FE000DFA1D6F4EB46AE8737F0F9F13C4F868E21
-:108FF0008E6288D288403F5B47BEE5621B0ECFA5DC
-:10900000E20787E7D3F66E1C6198D78A956B111734
-:10901000696C1D6F36EC8213C16EEADFBB254F9F72
-:109020008FA1C797B5139A3D98BD57C475C3D9F999
-:1090300094CF0289F2D3BFAEBD9860721D8078D004
-:10904000AD97DC788F4E94BDF8A0E81BD98BDF502C
-:109050001DCCA37AFD64021F370791416037A68BB0
-:10906000DB7E0A38EAA4E3A639068EB471479BEF8B
-:1090700017523D06DC90336C9D65FAA534DCEFA4F5
-:10908000CDF7C37684FA25AE18FED26F12B274F70C
-:109090007A84ED4A845F22E77E7BBF643AF5479588
-:1090A0001CA06F20F18F457B8671C942D81805F14D
-:1090B000C1B47318E7F14A74FE8AE3F3D3882FB082
-:1090C0007F4252B77E18FD152DCE3CD6A9F9537AB2
-:1090D0009C84E38DB3D87DA51A4E0A819FA0FFB36F
-:1090E000448CEBF4861BADFDDEF012A2F6084C5664
-:1090F0008F78E1FAF775F1F2176D7C194A86F6055B
-:10910000271A3E34BC18C79BFF34C4837A1A6FBA3F
-:109110007A196F0E8C90D1AEF7E6D77CEAE4F3EAC9
-:109120000427A6375C351B7F97682CD811F037F9D8
-:10913000B8158E6BD5339C1C685B24C1FA9117EC73
-:109140004766B71CB478F0FF00C6C481D500800024
-:10915000000000001F8B08000000000000FFBD7C25
-:109160000B7C54D5B9EFB767EF7924334966924940
-:10917000323C841D082121090E21BC1137490811F8
-:10918000A20CA8888FD6011F6020094DADD5536F62
-:10919000332181526C3D58BDD67BF4F43758ED41F4
-:1091A0000D75080183277026A098F0D020F8C07AAA
-:1091B000DA6829451B92185A0F6ACFF57CDFB7F69B
-:1091C0004E662683A5F7DE73879F2ED65E6BAFF5BE
-:1091D000ADEFF95FDF5A9B4AC09F0A50B315209844
-:1091E0000650F9E1864A4806E83B20011403D4966C
-:1091F000C9411BFEB5B4FDB1C745DD0C5689DF5131
-:109200006126C0F5207E0B950EC5E60658E695BC96
-:10921000721680D62EDEBFE19225A862FD7AAFF9E4
-:10922000E31E9BE8FB35FF5F03C800B8517F7F1941
-:10923000FD0FFB2FD3A460185F5D363BBAFF8D97FF
-:10924000CA3F91A6022CD7629EC34F3E93A7F2223B
-:10925000CCBE24AC5744B78F7326B9CFD9F12FE3D6
-:1092600061FCD732C0C5F3656F51F7AFE977EDC840
-:10927000F2483D526601E8ACB77119DB5E6E017FC2
-:10928000C881254D50C4650052010A9DB8981958EF
-:10929000BF64010DF9086313E0F7B93A1D1386DFC7
-:1092A0003F88E30770DC308E1FC8013854EFE4FAC2
-:1092B0006BF51EAE5F93822FA4E37F87BFB0A8B883
-:1092C0009EC5EDDF51FC38DFE24B0A8F3B9BD69306
-:1092D0004F0B8371B49E3FF716FDE30D30DCBFB634
-:1092E000FD338BBFF0F2EBF95BF3E7A7A83C3FCD72
-:1092F000AB150CCFBB44011883EB5C9A1BCD5F63AD
-:109300009E58F9C6CA6FB9FE7EACFC56C4ACC79075
-:109310000FF4A2328D8AC3FF4B26D0A65F5E7E4338
-:10932000F2B1F8B3BD0523DB017EC9721A1E4F9757
-:1093300017742BBE42419719F5BA52B70BD4EF40C0
-:109340000ACAB9B213C28948D8F5E72B3E51A8F42E
-:109350004AF071943E037C6CC85B1E1E7FD125E4ED
-:109360006BDAF0BC8B146477113D1F0B8138EBA8CE
-:10937000A17114EA1F60396CD9615A15C2755C631A
-:10938000813B7D54268A32E094B87D93D3C4E3F6C2
-:10939000FFC56682AB015E3E985902489FD7EA3C02
-:1093A0000613014266E0F7BF4E52B9DFE6240824F7
-:1093B000E0FCA074DBC85E9412805CB43B65B4250D
-:1093C000D88843362B611FD961BF578106B4DB2F84
-:1093D0008DF70E056E0714C9E68F734C8D59F47E18
-:1093E000B87B1EF69B55A4A8DBB08BCBAA7E87DA90
-:1093F000FB0E589DF45EFFFEEF7798699CBF8017C7
-:109400002984D70E5881DAE73BCC41F21F8BE4E385
-:10941000B209EBFD030056EC3F7F55B814506ED7F0
-:109420004077A313CBB924C738F27B8DD69BCEFEF1
-:10943000C3310AE5B44097D302DD6F951E90D98FF2
-:109440009426C941C81AF653D7EA325A806C253A95
-:1094500016B4E17AB1FDDA4B4A5CBFB4481F77E13C
-:109460009F4121935C08D17ABBA84DF8A312D01478
-:10947000C0294B6D31EDE497909E45CEE8E773C966
-:1094800077A25EEF8EF14BF833D1BCF73BC5BC8BB6
-:10949000E4BF26F7E0FA5FB668EFCD437A074E9A4D
-:1094A000E1597C0EE7B13267245FDAD0AE83399799
-:1094B000B78BFD07133515E97999F4C741F5D19AB2
-:1094C0003AF5F2FDA7F60C94607778B97985021326
-:1094D000581D4F7B3286F93D82AF3AFF63F9D9229E
-:1094E00041931DF9BCB0DD5B46AE65041F3B918F17
-:1094F000F85EC980C6F35C291F0DFB78F95CA246B3
-:10950000FAFEF2B9D11ACDFF2AE96BFAB0FEEF3FAD
-:109510003B9848FE13F9A82AA817032E9BF759D6A3
-:109520005FA1F7A15139C16D586FD1F5FCE5C48138
-:10953000A3F9C4EFEB4DDE67691A65E3C41585E452
-:1095400037B7969CC577240DA407D17E24D509771B
-:10955000601940FB217D0BA402EB93194240F336C6
-:109560006AF034950BE6AB29C4EF411CB3DB41E351
-:10957000A929A4E7F0D78B337D8523F9DE528F0A22
-:1095800085F3B4D6DB34251B605FBD93EB6DF51E10
-:109590002E5FAD57B9DC742CF9C1208E53AB593412
-:1095A000256DF87D57AAB08F05E86788AE052005C0
-:1095B00003A8730B1ED6F55E91829B249213AE27EF
-:1095C000829F2897C19EDC08FE36294D9366B235EE
-:1095D000B0BC8BF24DFC3E06FFE0F35923FBA3DC4D
-:1095E000A3EAAA4B627EE6BAB42417963F74F852F7
-:1095F000A86C916E397C01B8EE12F55BE50B38FE74
-:10960000F4F0427810E3C374140CF1157FB713FD26
-:10961000333A2C40F2C180CA7659A4D3A37D2E4997
-:10962000E7703E329DAFC7E07BD6CA30E9D13EE855
-:109630004923BE17DB7C76B428A443C855936EF645
-:109640004838DE9C748B5726D226FAA66F44FE75E6
-:10965000A4E384D8BFA32363AC8AF6A6296FBC4FCA
-:1096600076ADD91C61812BCCBD3D11713C139E712F
-:1096700052BC229FF635F2BDF377C901F66B8873B1
-:10968000C88F759E4AF686719E6B2ED9BC56D27FC6
-:109690007A11EDF56062F254F2CFD05DC6EBB8D628
-:1096A00026D6916FF617BBD89F850F9FC0F7FE6D2A
-:1096B0001080FCE935DD1FCA80F4949AF2327B9069
-:1096C000CEC3D2E4142A9FFC5D720197A7927B89D6
-:1096D0003F074D7695E67DA75E2DCE467DD1DE72A5
-:1096E00098001DD682B71C0A9527EAA1381BF5E51C
-:1096F000AD7A1B9727EB9D5C9EAAF7707918DB4922
-:109700009F5EC776D2B737B09DEA5DD84EE5311C73
-:1097100097CAA2DB9378BC96DB922CB48E83C9D017
-:109720006CCC4FFA144E0CB78217E03F1EFB6AABAD
-:10973000ED2A8C97567FA1340DF9F4B3AF2A14ACFF
-:109740001F5B3CEEA1BF60BBF967A61FDB90DE9BF1
-:109750004E395A8F63DD9EAAFCD841FA792C119DAF
-:109760002399B5B94B433AA6936F1CCD6CD760369D
-:10977000D6D3F47AC07C5DD97C8095A53DF9E042D2
-:10978000257159AFB3217F57DAFDDFA3BA25B0ABFE
-:10979000A2EC2AAA6388247B97CC41B6F7B1927BCE
-:1097A00005C6BB950EFF7F12BF0D7BD1A43FA491D0
-:1097B0007F98A949E072B3BC8393A4E1E746BF95C3
-:1097C0008E45FF49FABADE25B37DCD982F6941C792
-:1097D00048FB35FACD38AB9691FC669E2F6FA2728E
-:1097E00059858BEBBE55B39AC8FECB1C977BBF94B3
-:1097F000DF7FD06566BD2D51B05F9C3868F49B8ECD
-:109800004A46B87BA02B31F82CE9F5697F6312D664
-:109810001779B28A64DD3703D75D3BB6517BE5EB40
-:10982000AD6C57DE242FE1F299A89069D8BED02103
-:1098300079C3642AF33F6A4AA376A7E425B62DD4F8
-:10984000A69D28A6F66CD9BB90EAA7D5320A51A7E7
-:109850009485F32E60BFC5B9295E1BBE772AFCD064
-:1098600045D2DF85B949DE04F2F34AF0E91AAA7B52
-:10987000ADDE0695D6F15869328DA34A5E13D65BEC
-:109880006E28FD1F4447892F052489DA5D0AE1D738
-:10989000277FF7C33227F66B192701D9CFA970DECE
-:1098A0009F88FE859D896A02F9698BB38CDE6BB156
-:1098B00048CE4D5CF79552FF408E597D1EC73D7EC8
-:1098C0009B9DE341E55B058C838EDF3686E342E5B5
-:1098D0005BF34BA83C6E1278BDF2ADCA0A6E3741FD
-:1098E000989C4AE5EDDFE2F7B697FEB0CC8DE31F1A
-:1098F0001BEF62DF82722A5622FC24F60789DEBF44
-:10990000BD9AFB7748990F9DC5FE170B528AAC385C
-:109910007FB93B21AA7FC55857547D49F6A86225D7
-:10992000C24F56166445D56F28968AB323FAFBE6D4
-:109930002744D55794B98AB323FADF54392AAABEEB
-:10994000F2A6ACA8FA42D31CE13FEA617E99B0F3DB
-:10995000F965D9208C89FCA953F47D03DBEF263B04
-:10996000EF12F8A9C885F809E552D655CC71B9D8D7
-:10997000AEFBAF00747B6692FF17BF2E1C8FDE8399
-:1099800020FE99497848FC1676231E207CA460DCD2
-:109990008EA0A7CC111DC72B40CD27FF5BD1B9846A
-:1099A000F154B96779199A31F231FABD0AF9618136
-:1099B0004362E82EEA32C7A5B7626CF4FB06AEAB91
-:1099C000D0E96B31F99B52098B05B46EC235C67A6A
-:1099D0000C3A2EB79E0AF98E3214FFDF5C572CFD2D
-:1099E000001B797F114BD7A04BC78188A71807763A
-:1099F000A6323EC49F3B1E3E30704F25FA3757A417
-:109A00007F7348EEE58597F76FC6B897C37BC6B8F6
-:109A1000C6FBD02CF3FCC6FB43CF5529FEF39DD8E3
-:109A20003F29CE73B714FFF973D1FD17286AA3033A
-:109A3000EDF82848DE00F1FBB8AA10242B3DAD3527
-:109A400051B9E843BF427874F1D9401395F37A8352
-:109A5000C7ADB8FEEB726595F20D061E8A5DD78C18
-:109A600054B14F3A7A49B5ABD8DE1250EDB4BF6865
-:109A70007958B5D33EAA45830ADA2F6A134D1B697C
-:109A8000BFA1E56389F59C54E1E7F352058E31CA25
-:109A900067657F5E2A96D5B69E47098BD47C316078
-:109AA00021307094705EC1489C7754093A68BEA317
-:109AB0000F071DBE083F7EA5386F14295B3AE9A742
-:109AC000A445FA91525B8216E93716395D51F5AF1C
-:109AD0009CAAD8C77B4645BD779D9A15D50FF16BDB
-:109AE0002EE1A0460BE42AE4474D895EC277B17CA3
-:109AF000FC177DFD5E8793E01398DDAAEC8F13972A
-:109B0000BCA5827FB1CF57A48A7DEA6F683D586EAD
-:109B10004F15F435C93E01E21037933EC4D6714F5C
-:109B2000BA8AC6C3913DA4775EBBE922426FF84E64
-:109B3000EAD5D729A8CFDEE9A6EF4EC4FA23A98B30
-:109B4000447D9E69CF04ACFF34B55CD4AF364D374D
-:109B50007B017E058BAF2BC37ABADBE74FC579FB60
-:109B6000CD8EAD12E219C52441917B78FFFB8805AB
-:109B7000E3290A16954C7321AD76ABD82FD724A0D4
-:109B8000FFA3FE259A4AFCAA4930E4DC9341711DEB
-:109B9000EECE3491BF30F66F760BBE87EFE7D8FC80
-:109BA000B5425FC2C92AFAA5FBF72FCA24BDD89EC9
-:109BB000EAE4F5E7EF99E7217F85747D97FAFD7F69
-:109BC000A46B533CBA9ACC629EDE96FC528ABBF9D7
-:109BD000E3511CD2B0BC70BBCFCF1342A82B8CCBAF
-:109BE000358F84F54697C54B387DFB907CAFAC6CC8
-:109BF000D4F313B25DE88D9C62DAB81BCB9FEBFA0D
-:109C0000F214CD3B83E61918B71CF5019C03E3560B
-:109C1000148A3AE9832C170D10DE1EF8569297F736
-:109C2000C763077EFB03ACBF7747BE9770F4078915
-:109C3000823FAB82131A7BB03ECD1ABC2A8C743E95
-:109C400094E67F96F4E0366B7012EB9B6363128DA3
-:109C50002F69C0FB10637F87FB38D5327124EE1F5C
-:109C6000392FD888CFB7CC117C36E6459EDA28EE5E
-:109C7000BC375B3C37E8C0F95B88FF063D4374C0E6
-:109C80005827C7031079A445B243E461FF60E2BCE2
-:109C9000492D191FD6F79C35F1BEAECFD85780E6B7
-:109CA000583D939B789E392736C94C6C00FFCCD425
-:109CB0005948AFB6ADE77DFA8CEEE87DFAAC4E7F41
-:109CC000A903DF9BF57EFC7CC83C7DDCD910942980
-:109CD0005ECFE989EE374FDFA7CF3B1FFDFCCD54A8
-:109CE0003DBE8D86D191798E3A7DFF33787C420AD4
-:109CF000E929F93A19F96E5165989D3AEC375AEB12
-:109D0000B15F0EF9471B9785A79D7711FD6DF5A8EB
-:109D1000D016F2931E2E0D7B2A3C0D77C2D4887983
-:109D200074BD37F838F8BEE0E3B49EDC9FCFC7BA05
-:109D3000B9D30C4175789D73753E0D82E0F3A0D3C5
-:109D4000C27C9ED9F5CBE9617C64F598408D585F63
-:109D5000829A086A843FB5E7A646D565433E3ACE67
-:109D600098AE8F9FE41D1D358E81370CF9BD9A5A30
-:109D7000DE493864BA631DE38E94D913A2C62D3E22
-:109D80001E2B27641CE17624F29F08D79F56A270F1
-:109D9000C62C77803800B33F546270C97699EC685E
-:109DA000EED9E8E7E6B4CBC8ED72FC84A93F9FEF9B
-:109DB000FEFBF9E9D2A2F9995611CDCF745F343F79
-:109DC000335745F36D943F9A2F63D64D896ABF6A26
-:109DD0006351547DFC8373A3FA6761008CAC4FDC44
-:109DE000BA24AAFFA4ED2BA2EA939FBA2DAA7F5E04
-:109DF000704D547BFECEAA2B927F61A82EAA1FB174
-:109E0000D7F40DF2BFBAED1FA2E6F9EF96FFA23428
-:109E10003D2FAFCB7F998E435C1AFAC7A2E138453C
-:109E2000E915F293AEF637BEA0FC4BA044E5BC5357
-:109E30006009781BB1ED09D927915F1B83AC36A16E
-:109E4000DF6832C13AF2F78F9A4C9C8734ECBC2A17
-:109E50004DE08BAA34E1F79F469BA6F866F0CFEC65
-:109E6000DE9E4478433699A09BE29AE265BF71C6B4
-:109E700001E16B713E7934705EAB3479F6B299A82A
-:109E800087F29B32EF1FE5D17E50717D8DC71F3F5A
-:109E900041F99F8B0E9B4AFA2AA7FA0314B7707DEB
-:109EA000A1E761245E79AF3E3C89F649467D95671E
-:109EB000E366EABFEA8E859368FF3AF4FC8E8E492A
-:109EC000651172885CDF8A38F8E87B69223F67C4D5
-:109ED00087DBAC6A630FCA6B9A2CFC3FC685EFA583
-:109EE000E1FA3F901E360B9C1530D3BA314E72DE2C
-:109EF000DF8580BA0ECB94E178A47E8D4AF5C184CB
-:109F000068DCF9261144FB085B2AC7FF5B0D7FBBA9
-:109F10002E8FF936E888EE3F78F744C1CF6F23D70C
-:109F200090DF672C621D06DDE7753FFCA9EE877B9D
-:109F3000C9FF46E49BD7ED783C89F0F5995C81A791
-:109F40008DE7CFE8727D264DE0E9F53B139C9179D2
-:109F5000C7EA902BAA5EDB36CA7936420FD71BEBD5
-:109F6000F04B0AAD63836E3FD59D3DC9B701E3F168
-:109F7000A7D370DC9A1D17BFBD8FDE370D648838FC
-:109F80001AE0F96E790F18D7DFF21544E1D297D2B3
-:109F9000447EE525A20BCB95583851DF56626C778D
-:109FA00051F9C6FC72B23B7C1E96B0BEAC13CC8499
-:109FB000D396FBB3CCC4F453E07D672F2E6D5F9A2C
-:109FC000CAF3DC043E33C5C577BF5D9D44FD86C63C
-:109FD00033C61943B959D42B57C09C41F99A6B2405
-:109FE000C60D389F8D9EFBEE18B399E2AF31DFBBF3
-:109FF000E0BFF00EEAC50AF0F2B8C6F800A9517E3B
-:10A00000F803CB901CED24BFBA2E5398F239756734
-:10A01000AC7CFED1DF30F0EB0790CEDF557DB15741
-:10A0200042BA7FBB7AE057FBF0F9AD4FA1DFC5B56F
-:10A0300066DBFD87D322CEC3CEDC7D91ED0CF1C86B
-:10A04000F34F92337AC9EA25FBF8A0EAA59C48BCF5
-:10A050007F226D6127BD07B3D3E29E47C4EE2BABD1
-:10A06000483FD96E55C699865EDEA7EB65DD0B933A
-:10A07000F9795DD2D07A44FD7999F3577507ACBC74
-:10A08000BF7F47D787AA17BF9819999F6B41BD54C7
-:10A0900073A8747249E79C2AF266CFF1C1A9D46F04
-:10A0A000A3ECEF213D3978E9E364AAEF79F34B5E45
-:10A0B0000FDC7465F4F723F322F95C9B34F02EF97E
-:10A0C00093EA7D5695F250A5FBF28EDD8EF59A4E01
-:10A0D000F43BB89E0BAE9E234FD37E6ABF04949789
-:10A0E000AA0927B073AF69958294C7AA6ADBBD65D8
-:10A0F0000CD6AB9A971793BAD6260B3F56D32205A8
-:10A10000693CF0A7317F8A74DB287D35EF1F0BB0E7
-:10A11000BDEFA818FF5C7D78EA59F44F7D2D9F9D17
-:10A12000233A36B459393F762E296C1983F35ED819
-:10A130002D8502EAB0DDF6B9C43E6A5DE8310BCD8B
-:10A14000BBEEB9E5D9040FFBF69DB4907F5CD7FA5E
-:10A1500058B9FEBC5884FB20DBC5FA9D1D9322F341
-:10A1600049F721FC83C8F881F40508F78290E309D8
-:10A170005D3EABDA273612BBD0AFED7D5A62BFE64B
-:10A180007493DF3BB8EBDFFF95E6DDFF2F9398FF7D
-:10A19000C557C67FF005184FD4E8F3C0F95316DA57
-:10A1A0001FD6B49ACFC53B17FABEDB77957BC6F0B6
-:10A1B000FE3616576FB18038B79900C1E7291E38AF
-:10A1C000062CAB919E1F5107A447710E58D660DD37
-:10A1D00046764671C2E308C6DB17D7B9159E0FF75E
-:10A1E000081BE39D57D6EAEDA56A8F85F270359E70
-:10A1F0005E0BE9754DF813715EDFF651B91667BF56
-:10A200005CED167ED3D003C3DEEBD2A7B05D98879A
-:10A21000E260C8C6765FB86680E253DD7ED40EDAAF
-:10A2200017B8FC034477606F824AEB2BDDF7C9CC8B
-:10A230009E8879FEA4DB8751AF79F9A3A966E2E78E
-:10A240009E8FA62A49C3CFFB321CEBE2E555AADD5F
-:10A25000224E6F4EF69D8FB683046F18E7AD69B737
-:10A26000F3F907DAC1968EE2483BB875DD0ED2F3FA
-:10A2700076D98B1601356DCBFD0DDC3FC94BE291D4
-:10A28000DB1606480F65A78FF513FE8AF3CDD4CFF2
-:10A290007D2652AEDB7F1BE991E2084F8ACC6BD45E
-:10A2A000987A7ED121915CB76B269AAF08D86FC996
-:10A2B0000E5F0FEF9F8A3354DAC71E9E510EC4A75C
-:10A2C0009F1E90385F6B4EF56FCD22F91E95B9BF7A
-:10A2D000E5F00B013A97EE9B06C5449FB1DE9F4E19
-:10A2E0000B838CE36C2E042F4DBB79FF2D1ED2DF28
-:10A2F0009FA61F617C61F78680FC4A23E206CAE7BD
-:10A30000D80B42611A2721D7572CE33C796E27F3EB
-:10A31000CB62F57B291F944D755C874DF1AD23FA17
-:10A320006CEE44B19F1E7B6579BA3EB27F85CE1B31
-:10A33000FD9C2FE9330B3DEDBB0A185FF31D9D39E2
-:10A34000D4A409BEC1762E6BDB3AA646C6DB44F028
-:10A35000DBE879DFFE5BBC44BF3951D7F78C44B6EC
-:10A360008BD8F9FF99F499E46E5AB3358BF84C7C8D
-:10A370005347F67B5AEF67F003147F2ED92B92AA2E
-:10A38000C5CB0F8D77973C4E72DD9CEACB7515F0EF
-:10A39000F1AC00C39EC4B87687FDFF5764FF1FE988
-:10A3A000FCDCA2F86DC4DF4D7ADD6CF1A94EB67FFE
-:10A3B0009F4AF30FAD6F74FCF5B5E9F6BA6582FFFD
-:10A3C0001BD7B74F5F9F3915F58DC64B06EE674E0D
-:10A3D0000E0648FF9A92A078133E3EEC2AF790DDD5
-:10A3E0006D39F4C538B2F7A624AF0728AF7560D62B
-:10A3F0002AB2FB2DA36F63FDFFF485BC2239629E58
-:10A40000136925ADE4BF7E69ACCBE2CFA575FC42F4
-:10A41000D723635DE96EDFABEE88BC118C755F916D
-:10A42000FE80BE9FF3EAF117F7739CFFEB87442F82
-:10A430009D27EED671B7023ED61B3B7855C6551AFE
-:10A440001CA37B1F8D1D26D846CBA6E454C4395DC2
-:10A45000B26C32367D9A0DB7E6746C4CED6FBAEB88
-:10A46000963421BDFB21200B7C169DAF004DD2A45C
-:10A47000C83CC56B55F1F314CFF81BC92EFF569E8F
-:10A48000624ED8B4DA92F2F7E72BCEBAA3F73D9F2B
-:10A49000BA55262A942BF431144E0C8ABC174CA7BB
-:10A4A0007D5333F112FF7B06D7CAF62DF5E5DA5C52
-:10A4B000684FEEFBB76D1D8B76972DD64FF546FA9C
-:10A4C0007BA7C03D43F98FD7A630EE463F27F3FE6A
-:10A4D000DFA9D31223B762C46BC0F78852A3F22757
-:10A4E000E1235F26937EED4A55DF22B90C74C97CC7
-:10A4F0004F2441E9B1B8E2D8D93EC203E8F78BD383
-:10A50000C53EC4D626CE176DAAC67E31C1E99C26AB
-:10A5100047D8C579B7C89F571FF9609C0531DC053E
-:10A52000D3F1E4021C7FC3DE96644AC3AD3FF3F669
-:10A530004CBA9253A2F81DE9B8FE4FA51D3936C298
-:10A54000A95B8353893FA1F08414F293850A049494
-:10A55000A238F1F1A922DE14D73CC587FF50D83EBE
-:10A560007D2DE1E5DAB0582FCD61C6A6BC36E07A84
-:10A570005F5B632A8D57FB6F074693BF7A295DE0C7
-:10A580009A172F4D11EF2BA050FFAC7497AEE741F7
-:10A5900013E50B5FD2F38C7D974CDCCF98BFB06D89
-:10A5A000A1EC443D28086F3FC479CD76AB4AF24D0B
-:10A5B000780E043FDA131877D61E5C0C14E7FA5DA8
-:10A5C000E095B07D57E2C06F491F060E58553A77A7
-:10A5D0004D706E87541C7F977E4F2B0F15B2C5317F
-:10A5E000FCDC982FA1FDE7941324BDE0F3DF0465A4
-:10A5F0003B5CE388E47712D35DA2EBD5AEC4B089AF
-:10A60000CE450626E15E87E91AA613785E83CE3C26
-:10A61000F6FBBB2C03E77EE066BA9CA4077920E832
-:10A6200084F6C92AF9D104A7C6EB4870AADE8034A3
-:10A6300092AEDAA908FCD06E1E25E73577D8AE6B4E
-:10A640001387EB36B4855D13403F8FFFD5363A8FC5
-:10A650001FAA9383993DFCFE2DE92F6C6B1ACBF951
-:10A66000BD808CA2B66399944AEB54797DE845B5D8
-:10A67000F422C107BAAF67B789F6A1FEA8E70EAA10
-:10A680003B443FAFD5695F92C5F64287D74378F028
-:10A690007E297CEE5AB4D7DEC77C2905B8AE5ED3DE
-:10A6A000A1079AB1DF9F568772E83EE97356FF1AF9
-:10A6B000D2CF573E5CF34821F9DB5D666F25F99DEB
-:10A6C0009EC0CF1887BF6856B745D81D8C1DC8E0FF
-:10A6D000FB8031F3D49ED9F433C2D7FDFB2595CE50
-:10A6E000BDFBCD03E388EE9AF63F5AE8BE64EDFE6B
-:10A6F0008F184F4B19FE1A9A6F765B03DF6B9B0323
-:10A70000DBF95E1BFA43BE9F18F2087F32783AE706
-:10A71000D98608393C912EEC0D06FCE3295EB5EB99
-:10A72000F67A90F6DD58EEEDB875228DBF57CF075B
-:10A7300018EF35C0A131C4F74DF01A97C6F3FEA04B
-:10A7400052417A96FFAEED4E2DA2FFA3E902BF3D26
-:10A750009A2E70667686BF89E85DDFF1B12599D6BD
-:10A760007936348EF6B921454D71C6F12343F61B77
-:10A77000634FB5CA8085FAD79E07F62B28EFA6143B
-:10A7800094DF4BEFB64D598DCFF7A24C5228AEE275
-:10A79000FE94E2EF5EB36F0CF56F78E7F3A9E4C7C0
-:10A7A0001E484FE7F57F7E60FD78E21BEA7F492275
-:10A7B000D9D96E60BF66D86901D929BE5F40FA5FFA
-:10A7C0004CF53CF6CBBB2CDD4BD82EF79A80EC1227
-:10A7D000F59FED01F5DF49F8AEC089F6C0EF4F6691
-:10A7E0003BDFD56DD21827A35F9FC4F5921BA9BE8E
-:10A7F000ABBBCCC9764EF7058AC85EC387789C1080
-:10A80000C024129D04BEA8FC883B99E936FCE5E70C
-:10A810006ED0E3869AE2C575D86539CA3E22E2A4B5
-:10A82000A81B71F4C933DB9E407B81EED428DC0F7A
-:10A83000EF0BBFFF5D3D56D5BD3E775933AEB3EE4E
-:10A8400084CCED07F57D5E58D793437A7E86E28609
-:10A850003A5DDCEFA5E733B04EF75D676A1B4B0945
-:10A8600063CDAED87E98CAB9BE502941C8F9ABBAFB
-:10A870000F9B8599E793FEB51EBA2E9FEECDF59FEF
-:10A88000B1420292D8FAE5C06F5FC4B53D7010F9CD
-:10A890001F274EE17258FF106F8D01CFC8F67EC999
-:10A8A000F023BD4B481FFB5AE5E13A1252838A4D13
-:10A8B000F577D23FDD16C0BA3F437B9F54E2C7997C
-:10A8C000FEF7493FFB4F7E994166B9F7B4D8C7B749
-:10A8D0005AB47CD29FD609B8B58DA3A7AFA58B3C3F
-:10A8E0004FB115E29E4B7EA5C7C19C003C22F1FEF4
-:10A8F0005C760651EE175A65CD82F8E73C0456CED9
-:10A90000237FA3E76FEF01FDA7E11F94CFBD7AF589
-:10A910001EC22B18B7EE7D62C4B9BF89F4696DBB46
-:10A9200004FF846B5FF74CFC7B09465EEBBEB61DF3
-:10A9300047C6A03CAB9E8BEEB761E89E7B88F7BD17
-:10A940001B9AA3EF1B7C95AEE396893091700BEABE
-:10A9500013FB07B3029D56D4DF5732FD9F105E7E76
-:10A96000C924F8847E95EDF213B71E674A843F1A16
-:10A97000B8007C8F286F67E830DDD799DB9CE5A5B0
-:10A9800039E62AA27D6E5B16C719508232DD3798F0
-:10A99000ADF9CB195F07B4D3742F649DEE27C1893D
-:10A9A0007F28BFA3AF6B9D8EE7EE0B46D33D07829A
-:10A9B0008D34CFDA9DE2FED1FA9DF1BF13A8D5C741
-:10A9C000D9F0D4C923940EAC0E45F7ABD5F953DBBF
-:10A9D00016FDBC057812189F117DCFFC4AEF43FC91
-:10A9E000C92CF0C5DBFA3846FBB519C27FD62079F1
-:10A9F00024DF0D4139487AB34E0A240B7C0B8ED5E7
-:10AA000048F75D86BEE8F765EFD6F97397AE2FBCC1
-:10AA10002E7CBFFA192948E78077FF249AFE7B42F3
-:10AA2000ABCB491F62F56A5DB399F16D156CB4103B
-:10AA3000BE8DD5ABAA217DD96EA13816AB4F357E20
-:10AA4000E932740B5CFE7F4BF77A7398F34CEBFFA3
-:10AA5000A7E4A53CD4BDADDFB1505E74A47D08F978
-:10AA600056197AA2AFEBEF5DCFED867CA7C01496A6
-:10AA70006F45DA15EE83A2F1F46ECB509E92F37C13
-:10AA8000839D13383F6EE851EC38E53A2E5FFC1495
-:10AA90007079A1ADD44EF8A2FFB8C92BA99C7F4C08
-:10AAA0002E443E4C3F2003E18DFEF6898F0790FE39
-:10AAB000A213C53752BE7CFA098C3FD8BEA7B3F8A3
-:10AAC00057E45F11E1A4917D2FECCA4EFBBD83C713
-:10AAD000E1F8DD7FBCE8F14AF2C3C7CB8A695C09C3
-:10AAE000DBE97E78911E871A8E17D97B22E2D1FD91
-:10AAF0001922DFBEC5F3FB47695FB078B7D94BF9C0
-:10AB00008EC566FFA604A4AFE805C9DB80B31DE9C6
-:10AB10003EF4248D8BF6A452BE66F1EEEF1DA2F634
-:10AB2000DA5D12D3DFDFBE287F17C5C7A0ECA5B85A
-:10AB3000D7DF7E57C1BD84730EDC537057C47C478A
-:10AB400052855F597C9599E371EF68FB2F2B29CFD4
-:10AB5000A9ED60FFD0FBEA1E0B7F57B04B020FAE92
-:10AB6000F388E7F0AF890FBDFB4E5A08E497B69E15
-:10AB7000B4F4C4F1CF467901B77161CEBF6EB7F0BE
-:10AB80003DCABD7FB0D07A6B9EFB88F369556D12CC
-:10AB9000FBA7AA67E4A04A799E03AF58483F6B9A87
-:10ABA00025C8CC8A6C37733BF951AAFFB159F865B7
-:10ABB00043EFD7E87A6EE8BD61076B74FF75D7D6AF
-:10ABC000683DBF17B42DA3F1FD7B9A57F33DA07BE1
-:10ABD000B6C7F75F861F5C4BFB528C2B6B9F8AEED0
-:10ABE00077DF907E07D8BFC7FAC95732F4F3D83C55
-:10ABF000C823FD1E0CAF19AFA03D7D7EB26A3CC4D8
-:10AC0000C93B1ED7F180118F07C3268E67B1FDFAAD
-:10AC1000DA2E5A288ED676FE99F16B79FB672C874F
-:10AC2000CAF60EBEAF7A3DF837101FAF6FB73B09BB
-:10AC30004757F608BB5FD26E0D06256A0F35917C2B
-:10AC4000FB0F8AEF3B02AF4A8CA340F77F6B757E08
-:10AC5000AED5F9B716F76763E8DE8ABEFFBE2F7779
-:10AC6000C711BAE251A33FDFD0753899F8B8048410
-:10AC70007F5A1212FEC99087115F46C6D1816F9329
-:10AC80003CD7B75BF9BEF852DD3F2D6D16DF93C59B
-:10AC9000FA8BFE517691FFDD2BE88D8DA735ADD176
-:10ACA000FDBB32D2D9DF0FEA78F813C3DFE8F2A890
-:10ACB0001C003BE5E797A8B237C86F752B347FE7D8
-:10ACC0005489CF633BD58929F1EE4B19E59B3ACEE8
-:10ACD00037EACB284F86FD43CEED8EC87DFC8D999B
-:10ACE00002AF54CD910324CF887DCFB2A2ACB8FB84
-:10ACF0001EC844BADF187BD74FA645EE7BB41D397A
-:10AD0000A4673FF23C5E49F78C6A9B857FE89B8D88
-:10AD1000E3A6108E07C6C5B5CDD620ED4F6A514FBC
-:10AD2000F87B30D20FB2BF766911E907EE1B1C9990
-:10AD300048CF723AAAC4F52F6FC3388EC32F2FFBAA
-:10AD40008CF5AA2B5BAC1BF996196F1F61EC1F6A7F
-:10AD50002E099C6A3CAF517A781F51D32EEE49B729
-:10AD60001EFA625C16D2DB7FE03FC6ADC67241A61A
-:10AD700088BFAD25A18FE9BECFE7BB6C71F1E8902C
-:10AD8000BF979AD80E6ACC3D198C57F6232E9C8516
-:10AD90007EF3ED4F79DFD17A28E14ECAC7F5ADF1E8
-:10ADA0008F777E839C1A6013E3DA4DD0C425E19E31
-:10ADB000481CB8D629EE0FDDABC749AA3F8C7A7D77
-:10ADC0002FF65D5014CFEE035BE64923EDDDF01B5B
-:10ADD000D5BABEAF2FD8B1858EE063F151B56E47BD
-:10ADE00088FC392EC6E2A21B33A3F5B4E1ED44C6BC
-:10ADF000B9FD5DB29372C4C8D75F8C26DC87F87E3C
-:10AE0000429C3CEBA7BA5EF6EAE7BE0DB365E69B53
-:10AE1000698E280D1C85FC637DE93FE908521CCB37
-:10AE20003FF8CA0492FFFA9DD1E745243F3FDFDF98
-:10AE30000AB2FCAA43763E4332DA5F3AF8CA14D229
-:10AE4000B386B7BFCC1172F922C7E2BE3C7D46295A
-:10AE50004962FF6B92C4FE77AFD2934CFBAEDAFD32
-:10AE6000B22FF2FEBC21E7BB75FD0145ECF3D765BF
-:10AE7000AA5C6F68177A613A204A9C7FA5C8F3984C
-:10AE800079FE11ED25A82FDF10B780E842D9D79AB7
-:10AE90000758EF6A4F9A989EDA938319D911EF05F4
-:10AEA00068DC4CF27B0D1B80FD881DC8BF2EA5EF12
-:10AEB0000FB1BEF4FD04C65947263C5229CEAD64FD
-:10AEC00020BFF5C0DB559323FDFF053DEE03F1C127
-:10AED0004328E70931BFCE874DB042CF13083DAEBE
-:10AEE000D2712CEEAF9AC88E63F757578A931B0E18
-:10AEF0005881F2C7B51F58F93ED0E707D6F2FE1DBC
-:10AF00002EF927939F01BFFF6A2A1F38B876323D7A
-:10AF1000FFFCE07D5773DE53DA1495AF08107D1EF9
-:10AF2000C2517F79F776C2975D0AE390A2AED3EF64
-:10AF3000D2F9EA9E56337F9B59BD77C6E38124C27E
-:10AF40004F454BE9BB9D3D9D0AEB1FE22A0347D9C4
-:10AF500019479D28661C85E3F8825C161FABA47117
-:10AF60004F9414533709DBC99F4D271CE518C6556C
-:10AF7000063DFF9C29F8D9DF91C0F9130926083D49
-:10AF800083EC28BA37B4BECE3864439B1CF5BD862B
-:10AF9000F1DEEE4C71AEB0D7D0B390A4B11EED1679
-:10AFA000E586B63D19B48EF5E610EB4943B359B4C6
-:10AFB000EF1225D0F9CD0CFED83840FC39468F5021
-:10AFC0002E4B2CC1B184DB770F9D07EAF73982E263
-:10AFD0005E5D63E744FE6E68B0738F3B5EFC394E86
-:10AFE000E73348DAD12CB1CF896DAFF3887CC6D175
-:10AFF00033C22F1E5DE89F1CCF3F06A044ECFB250B
-:10B000005D7EADE68A78E7861B3D22DFB4736CE097
-:10B0100028E971EFEE043E37EC7589FC6C694B97BB
-:10B0200042DF9FAC6F9566503C5A9FFB1E7F9F820C
-:10B03000F562F683E1FD7C6E5ADDBCBB5C8B43C7D9
-:10B04000B51E111F97E8DF018FD057BDFD1478D3CF
-:10B05000F57DDA23745E73AAD2EC14DF9989EF4A86
-:10B060006FD0FDF98DD79B19379D02D52CCE3FC4EB
-:10B0700039C532DD2FDFA0FBF911DF3B3F039BE930
-:10B080009C22F67B67C3AFDFAC8FBF02341E37F65E
-:10B09000BBF59B753C78B32FFAF9A54C1D07E6402C
-:10B0A0000EF9F310C617BE1F9197C0717A69E1A41B
-:10B0B000B83883BE0357F5EFC0A934E4DE90F71E1D
-:10B0C000C7BFA31D677ECDDF139C49800971CEC524
-:10B0D00086E39FE13F6E12F2D6CF2DAA9D824643B2
-:10B0E000EE17700716991F33E43E46E7FFFFF13D68
-:10B0F000A05C5022F325CFCAFE311E3A9FB0F53234
-:10B10000FEC615701CC4758DD3D735CE1A11DF2E2F
-:10B110008C5A1D577F87D7971A1071C4CD65479EEB
-:10B120009571627548E2EFFBAAC3625F5B5D26F62C
-:10B13000B539AD02A7AEBC490A6A12BBC3D3449F5E
-:10B14000A13FCB6C020F187A32C42F5D7FA89DF00F
-:10B15000C10D3A3E88D5A3C9D05D4EF9E65B34C92E
-:10B160004BF72A477C3FBF6ADAEBE4EE2FA73FA8F4
-:10B170006FFCEF22C4EAD1F73DFE120FE5D3BA0708
-:10B180005716E2B847F3FE388EF4A6E63276F32D72
-:10B190008F88133B1D81A37CDFA4453FEF6FC96BF4
-:10B1A000EB217E7402E3C75E57F7963A81ABF9BC98
-:10B1B000BF3A9CC0DF4356B7DBF9BBB0EAD686C4C2
-:10B1C00029E47FDB65AF1DEB95AD27CB889F95C547
-:10B1D000E23E4AAD5DDC8BB3B9FDB7107DD77B3B5A
-:10B1E000A2CFF92D3DBFA8FB063D8FF56B1B09A330
-:10B1F000A5FFF7F99B8D3A5FEABA2E664CC1A9FE0E
-:10B2000090E6AF267DEC7FFD450B1DD7D54E79A589
-:10B210009CAE886DF4A8DCEFFAE68E264AF31AF4A9
-:10B2200077643AF9F95173702CE3D2822BBB0FD3B8
-:10B23000B0FF8DA914A7FA3ABAA65A22F4BBB70EEA
-:10B24000FD731CF9358049B75B854B495AA1E3254D
-:10B2500061C7B5070E67503EA297ECB780CA7792D8
-:10B26000B3B1ACDE7D2A7912E196BDA21CC219ED04
-:10B2700032F703A527E7E6A448FA36337D17426282
-:10B280001C809E9C1B0B23DB1BFF5FDBFFD3A427D3
-:10B29000D5B69E28FB37F884BB7CFE3E3770D0CAFB
-:10B2A000F708E8BCC61521C757747F340B374B64C9
-:10B2B000A773E87C7A22413B05EEA0BA026125958E
-:10B2C000CE8BC3B2B87F3796FDF74C7DFE594AB896
-:10B2D00083EEE9CED1CF37E74237F75B00035C6AF4
-:10B2E000E0E4EF8B4BC0CBE56C5B7829C1F1825079
-:10B2F00088BF9F096728AE7336FD3BE638F21EE62D
-:10B300009B02E70C7EC8740E26EE1BC5AEA75BD76A
-:10B31000C7599AF03B041DE87EEE6C08F1B9FB3585
-:10B32000D0A39FBFC75FC73CDCF7D1B9DB35683B13
-:10B3300089CC8F20F79F4FEB91E3ADA767298B193D
-:10B34000CA9C449F14CE307D6DBFF275F4D36D4D11
-:10B35000CA57DF35D0F783E2E1734B6FFB1BEFD3A6
-:10B360007D6249D3F8BEB197BEC7A67D4E58E91D90
-:10B37000F2631300FEDDB3E637646FC6F71AE00729
-:10B38000BEE711FBBD062DF77CC6F03D35E3FEEDB3
-:10B39000CEE00A95EE6FAC72DBF8DFAD29B28D9B83
-:10B3A0004E79CA87D2FCBF21BDFA406A9EC4832869
-:10B3B000C1198C6375BDB283369BD62F69C6F7223F
-:10B3C000C0FA32F4EF0164007FB763B78AEF691EF9
-:10B3D000413DB4A5B2F6AB740F1A1E2E55092F6F5E
-:10B3E00071D9BCF45DAE95E8B50FD3DB6813F72FC8
-:10B3F0008CFB6BB17C6CB419794AAF8D7176CC77CC
-:10B400003E77DAFCFF9BE8BF3FA924937060FECB38
-:10B41000F33D7C3F29C15877898DEBC3F71A193763
-:10B4200036D17D6AA4AB311DF81EE2E1A49C14BAAA
-:10B430001FD5D825EE5337A607D87F9BFD12FBF307
-:10B44000C6CED24E8A07830E0BDFAB6E74F934AAD8
-:10B4500007D22144FE9FF83EDFE0BB6998EF21FD53
-:10B460005E5091EDD75751DE7F9A1B4AE9BD696165
-:10B470006D12F1C0F81E06E5E019954ECFA3EF7BE3
-:10B4800081E2E4FB17861C503158999DBA7C0DB9B6
-:10B49000388DEFF83525EA3B7E435E8F240AB99854
-:10B4A000E926CC447E57A57163E561F0FDBF008FAE
-:10B4B00040AEB13049000000000000000000000074
-:10B4C0001F8B08000000000000FF3B24C3C0F0A356
-:10B4D0001E81EF4A313030F1A28AD112EFE364606D
-:10B4E00010E062603005E2FB3C0C0C3380F44C2031
-:10B4F00016E566601003E21A20DE0DC47B80F819A1
-:10B5000050FC3910EF00E21B3C10FDBE4C0C0CFE51
-:10B51000401C08C4C140FC958181E11B03F1F67316
-:10B520000A33304C1547F02F03D99F24E9E7FFC1B8
-:10B5300086430CE96BDF71A07DF3AC107C46207B69
-:10B54000BE15AA9A0556F8CD588826BF088DBF1893
-:10B550008FFE720354FE5A4D34B3B581E90949CDCB
-:10B560003A4DFC6E41C7AA40FFA9013100ADF15F21
-:10B57000CA68030000000000000000000000000096
-:10B580001F8B08000000000000FFE57D097894D5BE
-:10B59000D5F07DE75D66269999BC816CAC4ED844A8
-:10B5A0000B7442421A10DB618B6811834B051798AC
-:10B5B00008644F2620F5C7DAEFCF40005151438B86
-:10B5C000355AB40304051B34D88041020EE0822DA5
-:10B5D000D5D86A5DDAD2A0C81A93801BFE5DFCCE76
-:10B5E00039F7BEC9FB4E2682B5FFFFF5FBFEF8F822
-:10B5F0005CEE7BF7B3DD73CE3DF78EE218C7948B1C
-:10B6000018FB12FFBEC798DDC6181BD79D32562304
-:10B61000D24A2DCFCD58D003FFCC62ACDCAD85979C
-:10B62000A7333665871AF95E12E43748613BE46D4B
-:10B630007B9D54DEBE9EE7236ECDCFA0FCA33AC80F
-:10B640004BD0DEDEF2C06550DEB943661BB1DB9144
-:10B65000713696C2D83107E37F5990CF66ACC0C926
-:10B66000B3E51BF6CDC5F6454D76E684FECA7715E3
-:10B67000CEBC0CF28507558655CA372FD3FA43BE88
-:10B68000382C3560BE63329F5F68A71CDE0CF53B2B
-:10B690003C2D2937B8183B55E5605E8DB16A774B74
-:10B6A000CAF5A3182B096FCFC57625F5920F973AE7
-:10B6B00065C7E697FBE1BAB64A3EBB97B1D22DF11A
-:10B6C000CC3B92CFE14BF8FF58A31CF91E942F8678
-:10B6D0007532E8B790D5E43219C75FAB79DDDDF09C
-:10B6E0003B55A5D33846BE7C2B8C03ED2A9E967C19
-:10B6F000B8C40A1B0B34C0F8EDBB9CB337B9707DDE
-:10B70000CBB4116E5CD7DD1AD62B0CE7EF747A71CF
-:10B710007E1BB45C282F59BF412B18D5DD5FE996FD
-:10B72000BED679D50E4D0D98CAA3D353558C794703
-:10B7300074E74B18F33740BF4C096BB346777FFF74
-:10B74000802532968CFDCBCCEBE8EE1F2049DF4301
-:10B750006FC13F015EA13D6E82AB81B7C53AFCDB94
-:10B76000DB8DB7B3BAC0A3D2996DEEDF481F403C62
-:10B77000C07C6A104E90AE11F3F34C649314E8DF72
-:10B78000E367BAC47A5F8F91D6A82C9FC1580B4249
-:10B79000A3FDCA78C86B6C11F331F69315D9FEA9D5
-:10B7A00090BF9F05E6E2BC57488122C413630D6930
-:10B7B00048BFAB24361BD7FF039C3494AFEA07F491
-:10B7C0000970AF9996BD4996C4DC93305FF0C4BD53
-:10B7D000E9D44F21F5A3423F43CFDF8F9E9B63E91E
-:10B7E00047CF2D32FAA9A47E9C17D64F4DEE04EB1D
-:10B7F0007C724B8C7EEEA47EDC17B62EFD8A89D639
-:10B80000F95C5146FD244EF5B100D4970D7A602DB8
-:10B810007E19CA5DF58963EF6566BA98BC12F9DFD7
-:10B820000D5C62A68B849C380B1D26FAFB58F2D067
-:10B83000937EEC5B220F834412351A5FEBAF915C71
-:10B8400098D4DF41F93BFABB482EDC312170B10EB0
-:10B85000F3C0B1593FC86B816FEB31E81AE629B1EB
-:10B86000344CBD364CA3CBEF56391C260FF8DB8881
-:10B8700023D03E68EB1C9108F9F5D2A45F205C361A
-:10B88000331BC1274E6695582FCECE483EDD9D9E78
-:10B89000BD296482D3EA41807FA9BBDFD56A200D30
-:10B8A000E96B2BBB2184F4B66A10ACA73F634F85CC
-:10B8B000AE8F8414683FA8200DE169D780BFCDE327
-:10B8C0006B30FE281AFF191C77078E3FAEE7F8F69B
-:10B8D000213996F11D838B2CE33B34181FE87D172B
-:10B8E000BB558C0FF09BC0D8F3A15B687CFBE022BA
-:10B8F0001AFF6E8D1559C68FEB1AFF051CF7A5DED2
-:10B90000D63F648275FD834BACEBD7F8FA5F650BCD
-:10B91000C5F871B4FE5F8716F0F50F2EE1EBB7F3B3
-:10B920007EBBC6F774C1FF751CF7ADDED63F74A2AF
-:10B9300075FD179559D76FE7E3BFCBCAC5F82E1A27
-:10B94000FFBD50195FFF456534BE660FF8908EB499
-:10B9500001719561189F0D0486482519E5A7746447
-:10B960001FC6A0FD3A3684E070471CA7BBCFE2801B
-:10B97000DE5CDDF28E8581A3409E55089A2FAD9F37
-:10B98000A4A19CA572907B0BC5541734C9B4DFB039
-:10B9900075F6F070986F7B931CC2FC827597876573
-:10B9A000DAEFD8BC3C6CA7B0087EFFF0A1D11BCD6C
-:10B9B000EB8A4E17D6A8C75A2D7CC4E7139ACC46FB
-:10B9C00056C2FCA621118CEBCE1F0339CA407EBEA5
-:10B9D0000F7214D3E32A8C07DF8F829C659A996FCC
-:10B9E00096F17D3CC4DE1C99827282FF1D5338BCE7
-:10B9F0008F2D91C208FFCFD62ED2503E2DAC890795
-:10BA0000A077CF2328F0D4B9CB1EDE28113CBD0887
-:10BA10009F1B891519FB33A0B51F80B6B0B6AFA523
-:10BA2000DD2D2CBC320DEACF5F933F4887F5DF3C1C
-:10BA3000DB3E56C6FD83F907D8888FD9005B0E63BD
-:10BA4000B31BD7AA032073E36CF5FD5653FB3901F2
-:10BA50006BFEE6226BBE5D0DAB36D4378A25B60190
-:10BA6000FABDB5D25A6E8C9328F5E17815E3FD2026
-:10BA700085CFF7564CC7E2679DF03A57E76D8DF9D1
-:10BA800004EF525984F6CBD66446F84FA67A019D4E
-:10BA9000AF3B7ABE7355873F0FE633F74E99E019F7
-:10BAA0003DFFD6BDF17EDB18486B3F569104A3D70E
-:10BAB000133DFF794BA3D7A3931E961F8AFECEE9B1
-:10BAC000249A9E824D93FA1E35D52B6FB8B2EF5152
-:10BAD000137D956E9965C91787E758EA17D6E65B17
-:10BAE000CA17D6145BCAE7AF5E64C9E787EEB4D461
-:10BAF0009FB77499A5FCD6CA7B2CE53717ADB5E482
-:10BB0000E7041EB1D4BF71F6064BB96DEF25D720FF
-:10BB10001F55BF2533DC373E751D7B00F5C14F5DDA
-:10BB20008A0FF171A22A8DF8E0549597D2F6A64CAF
-:10BB30004780CBC1025471162E6B08AD9E88729956
-:10BB400091FC2C5EB633141A08DAADE425F8C9B5B9
-:10BB50001A8B00094BAC4F171D77CAA6F2D6F39487
-:10BB6000D702A367F62C975B637F0F6ECCBF08E507
-:10BB70004E6FF200FE06E03ED721F6F7E8F232897A
-:10BB8000E599BF33B69CF8FC9C90B3651A9707659E
-:10BB9000CFF69BCC3C988F8CA8FCAAF11A00A82861
-:10BBA00027513B4F467A002EB0D0CB500B7FB7EDDC
-:10BBB00093695E152813C6A3C8C95B23A19C891C81
-:10BBC000187CDD689C87FF7E09F9AE2999F6F5B6E9
-:10BBD000AAE97D8F2A889F3C4A4F54CDA6F4585538
-:10BBE00080D2A3554594BE5F5549696BD5524A0F23
-:10BBF000578528FD53D56A4ADFABAAA1F49DAA5AFE
-:10BC00004AFF5015A6B4BDCA4FA9C10F5DF237490E
-:10BC1000E8ABC2AE809D87F267C55A5640DD16E29A
-:10BC2000735F1AF2F959D76723501F3FFB8E9DA10E
-:10BC3000BEDF1BBCA2E9AD773CFA495F290803FED1
-:10BC4000337B963BE3389E9C36369D813CBA67F841
-:10BC500013BEDB46515E4192810DC937CB1DA3DF78
-:10BC6000618CF0753E3C317FE7986B011FC71EFD6C
-:10BC70006B36F67B4EEC7F710764DA875964930F5D
-:10BC8000F165821BED6B9D3B84BC3F0FFC3EEA825D
-:10BC90005FCB6006E9044927FA3BDB68670AC2B15B
-:10BCA000393E0CC4CFCE1EDCE4417E5C9C66D38F53
-:10BCB000C68083919637A4EB2EF3FED364CD9FAD5F
-:10BCC00091A637903CF6265C3F1AE94AD78F0E437F
-:10BCD000FCA7516AF4B3384DD38F02BF9EDA3234D9
-:10BCE00081EFDF61BE0FD62712BD825D48F5FFD51B
-:10BCF000F3E9AD1F633E8C35B20F1C280FA06CE832
-:10BD0000F9ED9D1E78573ED1F2105FCDEA67A82F5E
-:10BD1000C4C1FF5F0EC17E15CA1BFD061BE490FD6A
-:10BD2000DBF8BDDE321EB4F31A3637B6EB9D6E1566
-:10BD300076CCA02B90571A1ACB64273A75EBBE929B
-:10BD400068C9079BFAE9967D06FF01FC0F82524104
-:10BD5000BA291354D4A1B8564B30BF23283F012F22
-:10BD60004189D72B77B46A012F91630BEA19B7E5A4
-:10BD70001874E7BDF18F20EF4FFE4665F762F9DFDB
-:10BD8000605650AE1AC520F76C909F2F72B735964B
-:10BD9000CE40B977D2C6F7F9052CCF83464F11AB09
-:10BDA000C9463DE723669B8EF4FF11FB9D27D364B4
-:10BDB0006FF86C1AAD73FE6AEB3E0BFA99255F586B
-:10BDC0006BCD17B06B5390DE0BD6A92C2C215F5A8C
-:10BDD000CBBD369DFA2D6495ABC8DE417B05C6BD53
-:10BDE0004D67CA00985FF9738F65E743FE3B36AE37
-:10BDF000A71BF67B711F3EFF92A4B0E687F20F1AD5
-:10BE0000337F7019C3F6E15528A7426EE6DBCC7A82
-:10BE1000E2EFEBCE3F7ABEC67ED2C38F20E6216F23
-:10BE200091FCE11876DA349B24F4AD10A537E0BA22
-:10BE30004D7A6BBE8083912F8FCADF1995FFA7E9DA
-:10BE40002D8959E8ED8814C8B72573FA427D41520F
-:10BE50003AB5C037E93FAD47FFE5FFD2FE0742FFE5
-:10BE6000D996FEEFFC97F63FACC7FC57C6EABFFC7D
-:10BE7000B96D3B43206F4A9E79C8C3601F3AA9D46D
-:10BE8000A4F800EF659B577A900E4E28210FD2F34D
-:10BE9000C9B03C3D163DEC467A203FA2DF25A15DAE
-:10BEA00085FF84FE4F3D75DF4CDC673EDBACEA640A
-:10BEB0002F6DB147ECC0AF158DC533D818CA1FE13F
-:10BEC000F9BBCFC8986FB2D267C9930FA5A0FF0D79
-:10BED0002845D81311D2972AEA3ECCC57D28C83A06
-:10BEE00089CFA2DBE1F8E7FA907CCCD7127A96C32F
-:10BEF0003C49CF0F0AB8041BEF3B23A3EF93B57265
-:10BF00003F6854FD22A1FFD4DBDC49C7C07462DF67
-:10BF100061DF417969C08385B9FE53BDF5E13147E1
-:10BF2000603E6D75BFF1482638197C76B661FE2FEC
-:10BF30009EF7F62E8FDB859DD7DD2E4CEDBC4D4256
-:10BF40006F6BE669991AF1A05E5CB641F585E07306
-:10BF5000D9B64D4F3C8A76EABB76DF70E8BF74DB1A
-:10BF60004B7F9800F9D2ED6AD20CBE0C9794D28D1B
-:10BF70009720FCBF746C371E4A7EF592E61DCDBF3C
-:10BF8000FFB84F373E4AB7EFD3D8E89EF098D2B00B
-:10BF90004F6B75C5C04BC3915CD4AFAAB77EAEA141
-:10BFA0003D7972AFC452D363C073C34BA427209CA6
-:10BFB000088F024F5D788BAA1F04BCA03C37F01499
-:10BFC0005DFE80903FD89F7714D1F3D3CFA35FF964
-:10BFD0003DBB0FD75FF4F4ED1E5CC771A592D3F59E
-:10BFE000632B53FC306E911A4AD129E5DF8B1EFF7B
-:10BFF00021D15BE11B3F4CE1F6A0BF9F8DF6A6501F
-:10C000003F5CDFC2F537D0FA0A5880E8AEE8313934
-:10C010002F0CE9A70A9BBE3D065F64C89C2F8E6F5C
-:10C0200004850BD6771CED12F4B3FE4E0E6F267FFF
-:10C03000C82286FCFF43C33FCE1653FE5307C79367
-:10C0400043B609BE026DCF4CAF7577B7207E4E0D5B
-:10C05000F2A7A21F2DC894908087F425F42BBF313E
-:10C060002D95E38779956CD10EF48029F81DEBB7F7
-:10C07000A87EE7184B3BF6657AF7F84BC4F830EF2B
-:10C0800038DCBF8FA7B0A28618EBBB5536F81EF67A
-:10C0900071137D99F89BF37BDD3D9CBF0D7E0FCF27
-:10C0A0009A8EE59FBCC9F907DBE1FE08F38AA4522A
-:10C0B000F9BEEB259207761689C5D775AAE06B6B9A
-:10C0C000B94127306F454A30D10BF6DF87E04FFE8C
-:10C0D000B38275D0CE242F83389EA7677F06DF16E4
-:10C0E0000AFE1F255BF99FADE77CDFBB7E15A27DB5
-:10C0F000AE4C0D3FF128F22BF067C88BFCAAE6E1AD
-:10C10000BA4FD71FF8C34DC0A7A71B0C3EB5CACF67
-:10C11000683E2D7A76B384F419CDA7A78B401B898E
-:10C12000C5A7F03D269F16B5FE3F959F06FCAE8F36
-:10C13000829F210F7B8363B43C3C63F3123CA3E5F5
-:10C1400021FCBDC9B27BD29F417706BD95FCB2FCF4
-:10C1500022F217187469D05D175D1A74D7C3FF6295
-:10C16000815F74F960A405A093BC5D2AD95565CDA3
-:10C17000FC3C0CDABD3C208BE0E4A76D8CD5BC3CCC
-:10C1800020C99C0F47E51BA2EAFBA3F27951F503F6
-:10C1900051F94A4BFDB2A6031A23FC472CF5EC4B90
-:10C1A0001F651FC4B0878CFD26D878460B215D0C17
-:10C1B000ECD450DEA9CB410545FFE01E99ECC50E3D
-:10C1C00080F12A18A7A33E3D1C02B9B1D2C9EDF0F7
-:10C1D0000EBDD3D307D295893CDF99ACAD42B96788
-:10C1E0007CEF74723F47475EA727D1E4A738D22C73
-:10C1F00093DC6E0DB3E9B1FC20B0A310DE5B596F88
-:10C20000E5DCFF394D760D5E8AF6688DEC431377D9
-:10C21000C1B21B3DE82AE9681E7ACD6CF8BEF05524
-:10C22000998E553AE23C63705E2CE457FA99EC899A
-:10C23000132CF4B389E8CF6CE676C5823551FA0841
-:10C240005B43F454E05AA2A13C053BE07DAB3F9731
-:10C25000F34589E8AF68BDB5DC688F275A68DF957C
-:10C26000D459CB03C23EDA65F04906CB2039838628
-:10C270000FDAE7422E4F93475D331BF0D1715066C2
-:10C28000789E79B659267C9CADE7E7972C944CFCB8
-:10C2900056C13A491E1A706A437ED27A97576D3B4F
-:10C2A000FE9C7D17D2CDCE3F8EF939A46D3BDF1DAC
-:10C2B000B11BF3CFBD3DF88FAC67FD297B9DE43703
-:10C2C000EED8EB267AEFD8F3DBC177617E979DFC41
-:10C2D000751D7B3F1F83F4D7B1DC5E84F2AE631023
-:10C2E000B787AAF77C3EA695F6D71584B7A3B2C642
-:10C2F000F5A3E6BF1E9692308555A1DEB0379EF8B5
-:10C3000029F8BC93FC0B1D7B3ECF0EB8FE75EBA944
-:10C3100010E7391D6E36FB599C5F22F78307778F34
-:10C32000DFB40CCFA31BF769F3A17CCA0B7F1F837B
-:10C3300072B4E359AE0FB5ABAD8FE3794587FCE13D
-:10C340003215E0DC8E4CD59FB1FB94119343A36270
-:10C35000C1E5EFE437B95078680AB74FFFFDE12136
-:10C36000F9B9BC73871D12AEFB8BC37F44B9B0D73C
-:10C370004E7469ACF774C332D257CEB7EEE1CA7FC0
-:10C38000173AB8D0754B910B59F7D47F737CFF5A8D
-:10C39000F6D2FCA2F9A0279DEFB983F2DBDC3E9A2E
-:10C3A000EF05D2FB82FF69787F16F0EE39FFBAAB5A
-:10C3B000FFCDD7DD3BDE5F9D2BF0AEE3797FF085CF
-:10C3C000BFD3FCBEAE9CDBF4DF94EE0DBDFE159B2F
-:10C3D000F7CD0CA83F9DD5B850B1B8B27CFFAB19D2
-:10C3E00050FACAC0038938DFC951E73746FAA6C2F6
-:10C3F000EDA6C9928DEC419628097B90DB51038410
-:10C40000FE30604901E9210306DECFF506C5BB0E0B
-:10C41000CF1F5F193CDF47B1146CEC3B01CCEB97AD
-:10C420008BBCD59EFCB9C4FC78343A60F0F70FA2FF
-:10C430005E3B70A04C7A2FA4A4EFBEE899CEBF97C4
-:10C440006916BBE74AAFD50ECA4DB2DA4B53457FEA
-:10C45000D3189FFF3497140E031C260FFA6912FAA3
-:10C4600047270F579904F95C165881F6C55497B5BC
-:10C47000BF063CC319F7CDE168570D380E599787B1
-:10C48000701C24939FF4BC70C47913DC32C2182F43
-:10C49000C3141F87639F721FF99D85BD4D474D9043
-:10C4A000575CAB5A909F15B497391CC8CE36ECE553
-:10C4B000DEE0CD84FDAD88210DF82B0365BFD3DA16
-:10C4C0001FD9DF065EBE2E3E0C3C7E53BCBC1B85D6
-:10C4D0009781AE450AF2EB74B417FA62FD0C9E1F09
-:10C4E0001852E8DC4DD80B57781729A4F70CCC501C
-:10C4F000105F858EA6ABF01CC4E193681E17B7D9F8
-:10C50000687F70644904F791B50AE5DFB0E9E3108C
-:10C51000DF332F7BEEF49D0CFDE67E8DC73DE5F10C
-:10C52000F38FBF7DF9E5448C1714782C84FFAF4658
-:10C530003FFF7A168903382D545828A10FFABD25DC
-:10C54000F6BEC5EF6DCDE3DF7753BAFB395FFDDE95
-:10C55000E4CABF3A7D0EE4D8FB00F35D980EA3E178
-:10C5600015B35DFD9D660EAFE021161EC2E32AE401
-:10C570003CD339E11D82FE9FFBD3B39968D74EEAC5
-:10C580001895C0E5EB30B21782C25E38CBBC093ECD
-:10C5900017CAD7A10974FE795076C78A2BDC2AEC1A
-:10C5A000ED5F627C09A41D75AC4646FB8D75921F3C
-:10C5B0003754E7609B63C4B7E4AB869F4AE00DFE47
-:10C5C000E46C3C8FE1E32F84A60966BCB5CD38A9A5
-:10C5D0008CE98907FC7BDF741EF54DE18BF63DC2CB
-:10C5E00077ABB335372F86FCB85DC06FE6FE2FC83A
-:10C5F000FF7969F3061BD2EFA57536CBF96AA92A34
-:10C60000ECB1B16C2CCE6BE67EA73B0BF17250F611
-:10C61000613C67B0F98C1688712E180D4FEC1FFD28
-:10C62000E95B559DF86BB7DA301FE1BAFB2307438E
-:10C630003B7A9756531A6B9E03EC7C9E0B59C3EDC5
-:10C6400063D2FFFDE03BA9C315998CF6671D137EED
-:10C650008F68FA6344C767B7B030EEAF68AFA25CCB
-:10C66000385BCF687F0790DC8F7637F0FBF7CC7EA6
-:10C670009C8B9BB6FF12F5828A6649C723860AA562
-:10C6800055433F6DB02951C67D38C36BC4BBEAA387
-:10C69000AF37F1C5565521F81E98B0FB661CF7E37D
-:10C6A000368DA19EE27FB1D383FBF8C7CD99C40735
-:10C6B000BDADEB5755ECAAA948372A9787D1F4307E
-:10C6C000AA3ECE92BF4C0EF447FE9A696F5DE28B94
-:10C6D00081BFEF6B923817BC40F916FEFF4CBEBD10
-:10C6E00069C8B7809C67E2A3BE5A0FF9961A4BBE81
-:10C6F0002D96BCA908F7C57B86A6225E17BFAA2681
-:10C70000C7926FDBAAF839E733224EB9A311E4DBF5
-:10C71000B74DF2AD11E45B8C7890BF5FA87C0BFF46
-:10C72000D7F0DF36946F31D6AB6B56F936A6F908E1
-:10C73000C9B7318D364B3CAF5D3B9F7C9392AF4781
-:10C74000FDF8A0EA8B8F413FDB843EFE8C884BC412
-:10C750007150CEE56A3A8D7FA172EEE20B9573FFC0
-:10C76000457036E4DCE21D8CE29C7BD22197738B12
-:10C7700077819C93901EB99C5BBC8771BF5C947C55
-:10C780001BD943BE31AA5F11E1ED834DE90FDF02F2
-:10C79000FD8DF5AB3E07D41FDB2DEFC699E55DAEF1
-:10C7A000A610DC7AC8BB831726EF76087907726C6F
-:10C7B00008CAD768FAF0355BE3C1778F3F5EFF2B7D
-:10C7C000E497DFCA74DEF8868D9F0FBD36FE7816BB
-:10C7D000D2D763623E8B84DC6BAF0A51FF535EE4B9
-:10C7E000EB2B77F138F18A46AE1F56D44B612FFC04
-:10C7F0003377C2171ACEBF788FC452213FCBCEEB0E
-:10C80000B3278DF3323623C3440F0B724AC9CFBF0F
-:10C8100040610EF4E397BA724FA2FE5B9AC3FDFE2D
-:10C82000A5E27BF1ABADABD0FF5DFC8844E7A5464C
-:10C830007CAB11E7DB236EA27919F977A3E32766B6
-:10C840008AB8A999BF94C21B62C47F946EB1E67F77
-:10C8500022F86F96DC4AF062AFCB31E3388C7A5D18
-:10C86000703A28E05427D37EDA0527809B37BD270E
-:10C870009C00D3333252BAE152FC5B586F56EFEB57
-:10C8800035E016BD6EC37F5D2AFAE90D0E069C7B6E
-:10C89000AC5FC01DEC029293D1F058A775F9B53387
-:10C8A000314E09E886E44CE8D70017182F6FD27094
-:10C8B000CB7D974705FD64D64C9A82E10CB330AE30
-:10C8C0001CCA0B6A17BDDC0FE031EE1DEF58DC4EC1
-:10C8D0002F9B600FE039EC566727C941830EDB358B
-:10C8E000AE071C14F0DDDDBF7232D9F94D928E7A9D
-:10C8F0004830E224B80601AE78FF28A870FC068113
-:10C900001E91FF0E3CF21987E31EC98BFE9D5C63EE
-:10C91000BF42BC40FDCC668E97605822BC64B14ECD
-:10C920003A7FA9A8957C11845FD306829F219FE15D
-:10C93000CF65C693897E9558F44B954CFB65A9A8A5
-:10C9400037D35EF307A4E7994FAA6C03811BFEFB64
-:10C950002A7A3E4F1C50349EDA04BCB6213C5D0856
-:10C96000B74EAE7745BEA0FB504679500959E03925
-:10C97000E5D1735F09AF7106BC908E51BE35E7CB30
-:10C98000982F689258DFF49EEBC5F35033BF17EF32
-:10C9900039C2FB7F4CF2B118EBBE60BAEE859E8BBC
-:10C9A000806EF1BCA437BA8E86533BD2F3B7BAE996
-:10C9B000F93567E7A14CA4E73D12F74334275ACE77
-:10C9C000353D761EF7B5D509740FEBEE7C55F56D48
-:10C9D000F4C690CB82EED17E30DF37BB041782F1F4
-:10C9E000A25B1C14EF47F318C2F553B37CDEE66478
-:10C9F000C9D767F5DEBFDB2EC58C2737F423233F6D
-:10CA00001AC7C3F8F926186F64F778D1FB83E12FB2
-:10CA100038DFBAFADBBFD9BA8C71BE6E3C5490B520
-:10CA2000105E8DB8A82352E0472AEA73D3254BFC49
-:10CA300015CC5CC8AD6FDC7FAA96DC7BFF2C4DA7C4
-:10CA4000FB74B7EBC6779DE8334F67E27C6FE2DBA0
-:10CA5000B8EF7FECE7E7985936F6D644DC3F26ABD3
-:10CA60000CE9EAE3432AF9A13F9ECAE36EAFF9ED70
-:10CA700001055D3ED7F0983876CD3889ECAC37B0FB
-:10CA8000EBF1A8873B987F04C12F13EFED65D4D558
-:10CA90004CF1025F8FDD12AEC6D437A533E935C441
-:10CAA000DB249921DE5AFC7DA7B8207FFB872C036D
-:10CAB0005DA0A01F50FBB1075932D69BE04F263333
-:10CAC000667CE3276F5E07F3187F48F679A1DEAC3A
-:10CAD000032E17037D7AE47A1B0B98E0358185AB32
-:10CAE000D1DF34FEA8FF3A9C7711E83B784FA4A829
-:10CAF0007943B507F3EB256A1F0C05723DB09E6DB7
-:10CB0000B56772BF857201EA6137C1F5BC5EB04E90
-:10CB1000F261887241F35A8A2F2AA893E842E1B65B
-:10CB2000B0C41CBCDFB003FADDB61EDA67E1FE0557
-:10CB3000EDB1DFBA336F5E877207E649EDEBF9B905
-:10CB40007C01B4F322BFD42DA2FE8AD74B0CEFB3E5
-:10CB500014D5F37DA9E890EAC3F2C67D8FD07E3B61
-:10CB600003C6EB978EFB50642ADD0BCA9474BA2F70
-:10CB7000191A4CF8EB601C7F6CFA20F20B52BCAB1C
-:10CB800097C0A098E363FE641F42F2B3C0B74CEBBA
-:10CB90000BFDBC96939C6E23BA3A43E7ED4701DE4A
-:10CBA0000180F71B225EE540CE075AAB695FFCC2ED
-:10CBB0003E949F9B344DA2388E852C8FE238668E32
-:10CBC000E7FAE6EB973BC3E8E77B5DED1C88DF0FF8
-:10CBD0005C6EA7EFEDDBB81C6E1FD44AFEF6E3EBEC
-:10CBE0005586F758AAD7CB242F8ED7AB743F567EE5
-:10CBF0008CC731146EE3FAC781F5BCDFE3A8B7E157
-:10CC0000B9079643BE70AB11E7C0E5B4617F16E883
-:10CC10003CFEC290BBE562DD3DF6A175CB3424D964
-:10CC200068795B2EE471098B90BD1C2D77CBF11CCC
-:10CC3000DD837C191D27E6EAB663900E225F105D46
-:10CC4000571C5219DA31D2076DB91497B647A2733F
-:10CC50008BF1CD921FE31A8ADEB18749FF0EE7CF31
-:10CC6000FB11EE2FEFDA19862C1F433C809CCAB1D2
-:10CC700077FEE9A7F0FDE41B0E8C0802BAC927B8BD
-:10CC80001B71BE599B793C4FD61BEB52F03E2F9B3C
-:10CC9000DA97E44061ADCC0226397152F25F771326
-:10CCA000DF1F74D4770C7C66693505B8BF7ECBC1B5
-:10CCB000F755EF66156364D8EF843D04F6811FF5E0
-:10CCC0009BE25D6B5334131D14EF599B22C3F75540
-:10CCD000221EA61AF7576857ACF1718AF74AFA066E
-:10CCE000D338463F46BFDA2EDE6EE81E9EF6D67F6C
-:10CCF00031CE8FD6F9A986F222BA9F1EE3F7D24F22
-:10CD0000CEEFCFAD93605E39AFCB14AC9EF3C18C48
-:10CD1000A1E6731D2335FCCAD96FDA98DF04BF9CE6
-:10CD20003FC531BF09DF8DE380EF017F5737496190
-:10CD3000A784F9235A7916E575E4F30AE17FAE98E2
-:10CD4000CACFEB1A33DE58817C3F234B227A60A195
-:10CD500080D63789F4352FFAFD0BB378FB42688F04
-:10CD6000FCD8F808E74F90135E942315EBD7E652F2
-:10CD7000FD3AC98BFD376EC8277DA4284766545EEF
-:10CD80007784F4A3A2A62349C8C7C0B7EB501FA855
-:10CD90009868D7518E1BFC68F0F7EBE23E2B73E8E6
-:10CDA000A3F17EC6FF46E68BC1D7F2212ED783F5CD
-:10CDB0009C1F83399C5F5FDFA6E20A2F84BF899F97
-:10CDC0008F6FE1FC2A3F76432EDE872FDCCCEFC34A
-:10CDD0001F583F45437DFA7858A2FDA6277F73BDB3
-:10CDE000359ABFAB25BEEF7D5DFDD2E06F838FE14D
-:10CDF000EF6A1CAF0CF814EF4F46F3F54CB5E10F9A
-:10CE0000B7C37CAF791AD603F39DF2DD3B3DAD2667
-:10CE10003909F914CC17283C9ECB902BE50A8FFBDF
-:10CE2000FBDAF38B1A3F6CB7FA477E674FE4F1EBFE
-:10CE3000752AD1FDF9F8B3079F5D207F5E285F9DBD
-:10CE40008F3F8DF1E53DD67E7E27E82DBABF7680F7
-:10CE50006B04E0FA4AFD268AF3FDE8A92333113F6B
-:10CE6000A5BB81CE91BEEADD2C82724E09D37E55E0
-:10CE7000D228D33D01A644B2AF739BF998C76D95F4
-:10CE80003EE3267A2A79D61E9E01ED4B767E3086C9
-:10CE9000E2689677525C5AE829A12F875AC7201F6B
-:10CEA00094283C7E2C5A2E041CDC0FD7B62B7E36E1
-:10CEB000AE4FDAC2DF8F2869B851B59BCE256E74AC
-:10CEC000A8463D3AD70D011DE3FD5D9C9FF9DD02AB
-:10CED000236EAC6D2B9713254D2AD981255BB6B7F0
-:10CEE00063FC70C93B76F27705B79CA1FB10539E9B
-:10CEF000D946FE9460936C397FEB11B7B9458ED853
-:10CF000031EEB0B19CCE1D217F84F20DB1E397CFFD
-:10CF1000175F58FACC9E9D210061E9AF9EF4A07C7A
-:10CF200039D5B2D98370877EBF326EBA479C66C34B
-:10CF30003D5F19A7790AFF018C738F43D835469C52
-:10CF4000EB96BEA447C2FCB2F3629C7374E9E5DBC6
-:10CF50003E7D1CEF11B43D7BFA719C6FD93F3E7E44
-:10CF60001CE3C1D85E27ED77C1A7DEA2386CA3DD34
-:10CF700026B1DFB56F7D92E2D7DBDFB5FBB0B7F648
-:10CF80003DC707633C60FBF62F52D06FB964CF34C6
-:10CF9000F2EB2ED9312595C5D82F8C14E9367C01BA
-:10CFA000F1F3D1F83AD07880E2D63E027CA3FCEBD4
-:10CFB0008ABB6D28E771CC5E116F5B1FFB9E428FB1
-:10CFC000F8DAC6EBAEB91CE57E23D71FCF1B67FB93
-:10CFD00026E0F1DB1780BF7AC32F101B7F1FE13FD4
-:10CFE000004FFBA2F0F769E3C25F3C8A658D7D7B51
-:10CFF0008DB38D5C00DC8C7B100F38FC871CC988DE
-:10D00000E75F525C33E26D8617F79F4F07E3FD91B0
-:10D01000136AE75CBA5FB8C7AE63BC68C99EB789DC
-:10D020007FDA77BC417E6826EE23B4B3AE3F1E3F65
-:10D030002E8975D6B9797CAE803FC6EF7A3DF45D16
-:10D04000C4E9723A36E2777B8BDB959D5CCF36EE96
-:10D050006794D7FD51C4C376E34BCA413C1DF9CA5E
-:10D060007868030EBA90C3DD71E8B1E3A3BBEE2B81
-:10D07000087C21FE701FEA8A3387FCC0B1E4377A4E
-:10D080009BC59007ED1B78FC7ABB1AFB5EB011972D
-:10D09000FE8F683E0D5F583CFAF9E6FF75E1D381DB
-:10D0A000CA4F724F38B5FD2DB61C4F774ADFEC9E44
-:10D0B0006199147D6FCAEB1C87713B4734B483BB05
-:10D0C000EC6CB1DE36E1576F7B4AA678E5550D076B
-:10D0D000488E47CB8B0A7C2F25C67C33C57C2B9A88
-:10D0E000F83ED1F6AC3BEC827EDAF6EF227AAEA8BF
-:10D0F0003F42F1D22F6FF995D66A8A8BC07D226CA0
-:10D100009A7FDBD3FBC690DC16EFB2448F33498C99
-:10D11000136C8E3D4EB0FE8C659CD25083A6BBCE68
-:10D120003FDE29C57F23F677AA85EB83A71AE4E9BA
-:10D13000E118E30F73AAD677A160BFA4F767DCFC00
-:10D14000BD19D91347FAE51277CE3B0949986A14FD
-:10D15000AF55BD4CC477FD872F0DF15DEDBE8AE163
-:10D160007C57227C4D7E1E550F30D44BD5B4BC2C41
-:10D17000F42B44CB1B2DC9C6C226FC2F714F4FF593
-:10D18000D279476420E2F370C67115FBFD4B949F82
-:10D19000EA2F0A5B950AF3FB4B48F22D837ED9DF19
-:10D1A0003E1894E7EED97F971EF163D9E257AAB0F3
-:10D1B000771E46BB84BDE0A4F80679AF93DEF9087C
-:10D1C0003EEEA4F51ED8F1F913A45FFFC2CEF8B964
-:10D1D0000F582F20AF0A75DEC7F11D9F3FFE57D4B1
-:10D1E0009FB1318C5FF838D447BBA13E9EEC9C8E3A
-:10D1F0006713C6A05FA4F085BB66A23C2B8CE7F446
-:10D2000058F84C6AB81AFA3B96CCF3C7B60DA27719
-:10D21000254A9F7553DCE8811DCF55E0BED4FE4CF6
-:10D220003CC37DA9FD05A1E7FF52BC5355AB7ACDA8
-:10D23000F1E3C54CF19AEFF39462DE12AFC4C82F4C
-:10D24000417C84FEAAA604BA0704FAAFA59F8FD436
-:10D25000CE3B7C44C7A1FEFCFE53A43FCA83E87AC0
-:10D2600046F9BDCE21E25E39B47375D70F6A9D05CC
-:10D270003C5FD39FCB9316AAFFB053F88F4579CF6D
-:10D280007E79FD8784FCEEEE87B7AF10EFD044D3F4
-:10D29000EF46D16FE996BF5F1CEB9D9518F3A7EFA2
-:10D2A0003F9458C8867ACA7627BD7F85EF28E07DEF
-:10D2B000859D1A3FD72AF344E89D9BDD421E97C502
-:10D2C00045E8DD9DFE621E581FF3CCD1FA34BD9FA8
-:10D2D000F69C93615C59F90B6E3FE2BB7CE7E7C7B4
-:10D2E0007E9E857189F114175FFEC2FF223A28B72E
-:10D2F00047E6223F746EB7B38DC8E7DB5F1D8CFC39
-:10D30000DAA64606F7F98AF3BAF206BBF5FEBF586D
-:10D31000C7A9AADACBF0BEBB71AFB6A41739F357D1
-:10D3200027D7A35F71FA5F7212BF5BDF733A55357F
-:10D330003B13DF5930EA973862CBC577515E7C13D7
-:10D3400039EEEA713FF55D9CCF47AC2505FD3E15F2
-:10D35000A077A33C2FD9923E10FD04FB9DC63B0451
-:10D36000DE04DC8FF6AB5EB2A73135EF3327AA7C43
-:10D3700099CA30F4DF8CCC54601D1D1BCE14F467A9
-:10D380001847EA9C1D4BEE9D76C6D33A4A1CF69888
-:10D39000F79DCF09BA7A0F8DFE643E1EF28731EEFB
-:10D3A0007E354C72F88E382FD52B01BB08BF976E97
-:10D3B000999369797F45A9A17AC0A704CF62B64E37
-:10D3C000CB32C96F63BCE2A559994A267E57FE4FFE
-:10D3D00017BDCADD7866A124D20B150163B6AE9FD6
-:10D3E000E57E88A2E639107E1ACBD3151949A586A9
-:10D3F000F83D8E3550EA02758BBF5356C9504E9E8C
-:10D4000010E7F6E8EFC2B41B5E7792DC0F0D626C9A
-:10D41000783ABE07E14DD04DF053F1101EE6635748
-:10D420002A1997173374B493A550807D09F4545D7D
-:10D43000353D13E911FEFC180749A607CCCFA3BF61
-:10D44000FC05EA4140A7FC3DBFEFB270358018C330
-:10D4500081C9AF3A99F177E856BFC3CCF6C6A5713A
-:10D460009278E7681FC93117EBFEEB843C8A55942C
-:10D47000B7D509FFC8C1734497CE22A817C6BB58B9
-:10D48000241E52D728E59499FF3D599037D1A93EE3
-:10D49000D15A1ECD1720D7A2C66D20F841BF9F4498
-:10D4A000F5FB4954BF9F7C55BF069C828E8D3E7C08
-:10D4B000A76265559E801B1FCF21E006F01989EFFA
-:10D4C000E8315B9C4F9C87135CE3C46CEC581FF005
-:10D4D0005A1E974E78B92F616F27C641B3A45A865A
-:10D4E00076EF0A89EFD3F097E732B563BA83F8F0A5
-:10D4F0001E314EB980F30AC33FD5A3BE93F4AF1ECD
-:10D50000F59DBDD58F8B5DDFDDDB7CE263CF27B181
-:10D5100097FE6BE263F6FF75E552C50B6FBF86E7BA
-:10D52000B65DF24907D05BF5CCF238D433138FFDEA
-:10D53000A395BE703DD331D08AEF38A46FA0B7B8A1
-:10D5400061D6EFD174D21B7DE58B7540DED50FE03F
-:10D550007093187F6A1D3FF7BE6509F7D38179E89C
-:10D56000C7FA378BFA37390AC9DF70C4C6DFBFBACA
-:10D57000A596EB91B7FC58A6F3E91EEF51E13F8069
-:10D58000DF6E5D2A8523E9B1DED76275783F6E9E36
-:10D59000183FFABDAA00F3E6AE9663BD57C5E9D2BF
-:10D5A000B85717FD4EC5029627DE21B37E3FEBD458
-:10D5B000BBE467CDA8EE7D2CB416E81EF54FA07B2A
-:10D5C0003C97C7EB621417E2D1785C48CB203A4F06
-:10D5D00033E4DFD991DE04DCAF997F30FFAEF3EFA7
-:10D5E0008BAFF4A69AEF1D2AE7E22CEFF554ABBE01
-:10D5F00034946FEA39D05FC154D6CE0D615E533991
-:10D60000E8ADC4FC18BE49722A4D09A35C54F43C31
-:10D6100056887AAF78EFC3A8AF255DD5A567BE0E53
-:10D62000FF6F8E4B26BE5CBCD64BF7B63F8BCFDB75
-:10D6300089F4247B727C01574F7A08EDE0EBAEC68B
-:10D6400075A7F75C4FB5E6F391BE7D158080FC6F42
-:10D650003E07CE4FB67BDFF6E2FC7EA332F4BBF48E
-:10D66000848FEF4418CACF8607507C889C306304AF
-:10D670008EBF46BC6FBABA6A24A52BAA984879BC5B
-:10D68000DC8A2AAF487344EA17E974AA776F551AFF
-:10D69000E55755F92835E0EBF0D5D0FB938E617C4A
-:10D6A0007C872EF0976413F00B90FEE548ABA473D3
-:10D6B00045A75E19C177DFD840D87770597A0DC178
-:10D6C00057D319F935A13EE5ED988754AD9D41F842
-:10D6D00052F44A5608E56FC5078E225C9DDE4B2D3D
-:10D6E000EF5ADAD3C646BD7F1A056F83DEB671B82E
-:10D6F000DF2F717A8B86FBFD6A8B17E322EEBFB2B8
-:10D70000EB5D29823B98431CEEBFE6E7B43DE1DECA
-:10D71000327BBE09EEEEECE904F7FB049CEF1670D9
-:10D72000AD1678A816F0AC46B8537EA4C8FB443AB0
-:10D730009DD27BC4FBB72B111F90CA087780877DD1
-:10D740005488C9301EBA79F1CFEE1274ABDBC81F12
-:10D750002ABBF2FC08777B1287BBC3057820BA0688
-:10D76000B87BB13C44F0545D1CCE509FE341E415BE
-:10D77000847B267EE7F800B8F78D1F87F27082055C
-:10D78000CE5AD2E40B83FB237C7F4B127C1E0DBF51
-:10D79000248DBFAF6BF0776FFA71B588B7AE16EF17
-:10D7A00027221C51AF7908E0C3340E4FFE7DA4C878
-:10D7B000FB284D16F67F35E001CB1F16FA10C21973
-:10D7C000D31FC573FB3CC956B94F4538F5E1EFF29D
-:10D7D000B0A4101B98CD78682FFEA5859817F3C6C6
-:10D7E000F9AFD74A3FB2AE44BD03E97D18E96DDD1C
-:10D7F000ABAA0DCF3FE4A55759EE67CBB3FD895EC9
-:10D80000827F4042BDE63EC1876B915E687EDC1E32
-:10D810005E29E8E06EF1FEEE3D827EEE17FCFCA094
-:10D8200041373E7E3F64CD741EC798946113EF204C
-:10D830004698394E30D1D7C0349817D9365E4AE968
-:10D840009D4BF68E9DF8367E14F3237D25BE7367BF
-:10D8500098BF439BD70FF5A144E3DDD989DEC439D6
-:10D8600074313DA288F720656E4FB6C47CDFB5DA0F
-:10D87000B7DF817E99DEE613EFF3A7AF84F1E26BA9
-:10D88000DD6447F50DE4CD590879572DD8550CCBFB
-:10D89000B97C70C1BC0B4DF411DF8B5F47755D59CE
-:10D8A00080F44AF638A43FA91DEA44F802ACBDE86A
-:10D8B000BF7A48CDEB87FBC14389B1FD70B3E2B9B4
-:10D8C000BFC49375A9C59FB04EF5533B7DA255DEED
-:10D8D000AC13FB439FA956FE30F683CB447F9FC514
-:10D8E000077E140F7496726E2AC9CFA46B63EF0F74
-:10D8F000D5AA16C2F739AA4773BE0EE56B5C6FEE68
-:10D900002177189D839C0D8CD888FE2F83BE96337B
-:10D910002EE7428CEB93C6BA7E86F43E02F7019D59
-:10D92000E81EF701CCCBC334A29B945B6CE47F5818
-:10D9300025F8EC5EC15F6B045F3D807C3502DF81C2
-:10D94000F651FA13C14FEB90FF20DD129FCEF57810
-:10D95000F1BE9761C72C778CA5F71CAB5D36DA0F4B
-:10D960009477ED6117DA05FBC6EBE8F791DD597A9C
-:10D97000C08DE5590E3FC0434ACCD2915E3E732F15
-:10D98000B8E8ABE25B01FDF4AEB0A2727FA49E9456
-:10D99000C7DE1F45A753F49E80AA5FCBD03FFD7022
-:10D9A00052A513E1FC703C8FD3AACDCF26B8033E1D
-:10D9B000B6C59BE2A552675FD5F51E1F76FF702F97
-:10D9C000EF12EC12F2820D0CB16126F9502BDE7BC6
-:10D9D00064DE101B699213CB87E732F4EBF5940FEA
-:10D9E000BDC8CBCD5C5EAE9062CB4B437F37E46568
-:10D9F000B45C31D295174DB7DCA7545D3E46F26654
-:10DA0000646CFFC1EFE3EDFC1D6AE6F3E5A7F72CBC
-:10DA10000778FDDE0C2FD4830C7FC5F762AC275A44
-:10DA20003E9EB8CAD85703F43ED002CDFBF0F8AF03
-:10DA3000DC57ADFB41E1B9D5A40F149CCBA1B4A830
-:10DA4000763AF111C3D318939D7C7CFD0F3D88DF9E
-:10DA5000E3B5E27C7CBD1AC6B8A47D1BEF7A600EEC
-:10DA6000C075C1E3329D8FE33D0DD914DFC2B2BC56
-:10DA7000A4A71BEF231E0FDFEE31C73114FCD4E93E
-:10DA800047FDBF377A2C581FDB7F538DFF44BB8384
-:10DA9000F946A25D01FA5D6704F5BF9F38E9DD181C
-:10DAA000231FDA18EF33C78F18E95BF1D3CE21DCDF
-:10DAB000DF8AF73317D29DAB0F9DD7F4CE177CDCEE
-:10DAC00063E833C773D247459C35C07D96C57FCA8E
-:10DAD000CF498F097F1873F4521E27CABDBD947BAE
-:10DAE000783C13D36397FFD37EA4513DECB421B8A7
-:10DAF000FEF2DAD3ABDEA52FD6F3806211C7BD608C
-:10DB0000637C78790CBE5920EE072F10E75D067D07
-:10DB1000157FDFD0B3395D46D3ADF4D42544A71FBC
-:10DB20001F54C95F5B01F4877A98F4D4787A8F69BF
-:10DB3000D913973D780BC0F993433295979D731095
-:10DB40005DB6FF878FE2FC3B7FABD2EF267C727025
-:10DB50001AC5EBB78BF79EBBF8CEC5EDDA1B5C5C44
-:10DB6000AE149CBB97E8BB8BAEC2F335E4DB82738B
-:10DB70000F905E5680EFBD4EC0758F78799222E887
-:10DB80007702B61F92BB1CEA15B6723E61134315AD
-:10DB9000E48FDE10EFBB37063FDFE0F25AE2450BC1
-:10DBA0005BD750FF0CF4C324535CC802F1FB07851C
-:10DBB00078B884E57A88A521DF08F9D64DFFD677B5
-:10DBC000B0DB9DD6751AE9C2AE754EB0D861DDEBFB
-:10DBD000FC2EE773A16F14B6E6F07975ADE7E7E3C5
-:10DBE00063ADA77B1D13A97D7B62ECF1EF17E31FEB
-:10DBF000AB2AC29B5BAC44BCB75B10BE5DC3F7D520
-:10DC00000AD627F6914CEB2AAC2DB5C42B15D4E6D9
-:10DC1000D3FB7A85EBF3B5DB4CFB53175E42FE97E3
-:10DC2000270DEBC6CBFD6B2E23BCA8AEBC3B917E73
-:10DC30008F3D557CC77B5EEC97E3E984161A534908
-:10DC4000F2EA764FACFB4DF747E3A956E009EC80CA
-:10DC50002C139E0CFC44B73FB6B9FC8EF7F01CE2C7
-:10DC600011FE9A50EFF22B0A7FE9B1E1F7A4A0D799
-:10DC700063A00F042E087EDFB2C4CBF50A3F816F8C
-:10DC8000033EC677D0E7C208B727913793B13F4E1E
-:10DC90000FE7835BF7F8821E26C55ECF6B5DEB59FD
-:10DCA000CA42A0C79CD4B83ED1FB7AEE6221C70518
-:10DCB000ACA78B4FF32D7CFADA9A5B389F0AFC9F56
-:10DCC000DC7F0FD1F5B170BC0FE3547A5BCF6B48AA
-:10DCD00007E362D0C1B0101B95FD7F8F0E4E68FE2A
-:10DCE000118FE03E02FB15EED3C54FDE3FC63CBFB1
-:10DCF000B7E227FD9EF6A59A0B3BA70E4DF61DF445
-:10DD0000D27E27FBAA6149435D813F63FB12CFA30B
-:10DD10009FA19F6E45E2CFC6C4D28B5756052EC732
-:10DD2000F38BEAAAA2CBD18FAA0A3D97A19E9BCEE4
-:10DD30007F1723D67B7DCCCDF1BBB2AA92CE3F9884
-:10DD400023C4F494EE7700D8894CF2472B2EAB7E97
-:10DD5000A6A9011DFDDF9A78A7405502ABD3B3D029
-:10DD60005F94941132C1EF1F2E7EEEB2266DBF8EEE
-:10DD7000E71A76E81FFD608E81CA598BFFEC456576
-:10DD8000415FC093F11C731C6BF04B12F913CF462B
-:10DD9000F913CF5AE69104F3FE0A3B5B7178E81C55
-:10DDA0005261C28F2CE0015F681FBB5BE7EB5C1E1A
-:10DDB000EF217D60D54536B2EBD609FFF4CFD02FE9
-:10DDC0004D7051E8BC01C3E0B0BE96C0D7E1C4734A
-:10DDD0000C19EDAD08E5DDF862974C4F1F4A984FDE
-:10DDE000645E09F37D596415DA0F1D935AEF203FE5
-:10DDF000A03390E606BC7ED6AFE5B084E712798109
-:10DE00008B11CEB57228C30BF57F21776660BDC13B
-:10DE100050F44E1F9E5E84F71202A6F3CE21B48EFC
-:10DE2000EEBCDC337FD15225EAFCEF6F179BCB5F52
-:10DE300071FA2FC679543BF9FB60491F4874BE57ED
-:10DE4000DD75EE9447FBF26437C723D105D2D54187
-:10DE5000AE379D55BC097DC89F3D32F345CB3C7C18
-:10DE600096BC22ECD13AA0533CA732E86398E2B7C3
-:10DE7000211D0DAF81EF663CC6D077FBB8E879F085
-:10DE800098FAB9313F1897E8553E97CBF7E3287ACF
-:10DE9000D82DF1F9878AEDDC6E642119F13AC7209B
-:10DEA0003C6505CF2732E38FECB5778D7327B682BB
-:10DEB000E7759E0BDEC6CFB9A3E733A7F9EE163C94
-:10DEC000EF99D3DC6F3E9E7BCE29BAF8434C77ABFB
-:10DED0009DFBE3515EFC50227DF6A6B75E54E32124
-:10DEE000DDF1E6467A9F60AE9BEFBF7359A78AF8D3
-:10DEF0000F305DE3E756615ADF6DCC27F20D2AFA49
-:10DF00001D6E89846FB81A72B7BE18BE1AD5BDB916
-:10DF1000073B5F42B4051AF45C3A1B32DA35F95E0E
-:10DF2000E679DEAE0B0E4EF1FB478A83D6D5BD6E89
-:10DF300007C1C15827D4247C74C149BCCF66C0A591
-:10DF40006BDDF1375F85FEF8DEE4DC1CC7E80F7996
-:10DF50009C3C9F57349C3EC12290930BDDFE1FB921
-:10DF6000A1FC7AB7FF2E4CCB1C9D839521C437555D
-:10DF700098AF900317A5001C3E1A14B83819E1D1C8
-:10DF8000D2F782F4FEC34E2E0F0EA71B7A6DAB1B89
-:10DF9000E99BBDC8F55AE3F73256ED387EFF8D0098
-:10DFA0009F8F5EE5EFCD95CBDE6BEE22FFB2CC62AC
-:10DFB000D921467A58F80D1E76DBC47BD17C9DF3BF
-:10DFC000140EEF798DF174CF6EDE52D9F2BEFDBC26
-:10DFD000A53C7E95292D63AEB7D8092B045DF7ECDF
-:10DFE00007FD1AD1FDCC5F3A99DE2DD9A9E993C876
-:10DFF000CFF138A7B3F953FD32C6FD4F582D911F0D
-:10E0000069FC516F532BE4E787137DC8AEF3EF5CD7
-:10E010009C89EF9754B4703F67AABC28E33F207DEA
-:10E02000683FDFEF31BF08E1E4F27B5DA6F39A368B
-:10E03000B53243477ABED5E54779907FBDFF5DC4D1
-:10E04000A7E1E730F6DDE7400FC038CEFC5BBC3916
-:10E05000481FF90D4E3FA50EA6C4815CCB5798030F
-:10E06000D3548D294E4CE39803D3ECE5427FAA9D0F
-:10E0700045FA8327274FC3F7C4F39B9FFC14DB1794
-:10E080002A917D92899EF29B5FFD82EEC3F9F3286F
-:10E090004EF75B5B348BDD39BAC19AFF7693359FBF
-:10E0A00011B1E6330F5AF303706D267D73FF1E1E08
-:10E0B0009F527A9ADFEF7D1E60A0223CB6D9493E7E
-:10E0C0004E296DCEC67887D34FBB6D58BEFBEFDCB3
-:10E0D000EEEEDCEAA47725F7BD17C7E292F01D6AE1
-:10E0E000E7462C3F1DD7908DFE45A84F714BB0BB26
-:10E0F0008E40BB71E7A506BD8629BE69E73FF8FDE6
-:10E1000094CEADF630C6519CDEF5E4D3489FA7B758
-:10E110000E207DEC792964C37E43F770FC4F88F3B1
-:10E1200058E454E916AB3D7E42E8011D27B579E875
-:10E1300017BAB8D6BAEE4BC2D67CA7A87F1B337DE0
-:10E140004FC7F810EFAA34DC6737C57EBFFD73C137
-:10E15000174F3DA519742B8BF71E9937A5FBBEE20F
-:10E16000EEEE73DB2503808E4A111643BABF974645
-:10E170008DDB850FD17F92382FEBFCAD4CF03955FC
-:10E18000556489EFE8D2FBAA7C69534DFB5141ED00
-:10E19000BE947CD257F7A5DC66DA67CAB61E48B9CA
-:10E1A00019FA6BDBA2D0EFEB95CD79E2810949F842
-:10E1B0005D6EC0F96239FAE7DA1A5EF2603DD08B23
-:10E1C000C79AE3BD0A6BC7A54D35F1E9D7A54B83C7
-:10E1D0009FCA740E9FE7725A72F11E46692DFF1D89
-:10E1E000BED2861BAEBB1AE1BE9EDF4FCF56589EF5
-:10E1F0000CFC53B6FD86EF8F86EFC1C7C6F9703EA3
-:10E20000D9F8242DDEBBAD3F43F776EEB571FF4460
-:10E21000345C467B387EEFFD81AB08E512F4F7A253
-:10E220006D2CB53F68037DE4C4E4D06B374395D3D0
-:10E23000ACE10F57535C96959E803E25D4B73A3794
-:10E240004BBE8DF47579F6B5A85AFB97513C3A94BC
-:10E25000C7B4378AC3D67EA2F17CA547327EF76861
-:10E26000A4995EA2EBF59D11A2DFB72A5B0A72CDDD
-:10E27000A4EF971DADA178D8E871C819688A3BC191
-:10E28000FDD14B7CEC147A02931CD9225E7C28CF02
-:10E29000D3BBA748974010A597B2A95E84EBB56C95
-:10E2A0003AA6CF4B91076499CB03F2336D8B277954
-:10E2B000D0A6B73EF173A4A3FAD1741ED65FDCEFEB
-:10E2C0006EF346E8BD58E37771DA749E2F69765293
-:10E2D0003CD5E98F349297CB308E13EB3FEDB4D918
-:10E2E000405F3BBDBDEF648C0B6E6BE0EF8A9F6AB5
-:10E2F000E83B59FB8AFD379AEF8D7DF108FE13DF6D
-:10E300004FF5F88B3DB8DFACE071D3A97D2B332AF4
-:10E3100063E0C96897A45566A0BDD279ABCBB7912D
-:10E32000EB53E90AF9DDD3C8AF922FFC49F7E9793D
-:10E330007778A0BE1BEAFAE1FF3E07E58DE877FC9F
-:10E3400040F6DDA10FED3E1F5F9015A0FBE3F40347
-:10E350003630FE7C854514A0B7F9B8AF8CA13CC916
-:10E36000CFF9EB258A235CB0C6BA1E7CE7DABC1F66
-:10E3700016E12F290EC5B8B0064A8BD65BCB8B7140
-:10E38000FFF050BC17C5CB94D459CB198B901FAD5F
-:10E39000ACFE4B7B2CB87DCA8CF5F96B3C16B9A34F
-:10E3A00092DCF950CEA3F595A23700D29BC4FE1C97
-:10E3B000BC33276D01A41D4B27A42DC8C47BEE7C64
-:10E3C0001F23D38EF898BF8F573A954506F1777182
-:10E3D00018EE8FA5CD526434E61D2CE419CBBFE3B3
-:10E3E000FB20B86EF33D3163DDB85EF377F626C7E8
-:10E3F000AB71CF10D76B2E2F137028ABB75BFC3AE5
-:10E4000013EAA590FBDB787FA995DA55347E69B7CE
-:10E41000F42BF65FD8B79913F035A168838C8B790C
-:10E42000A84B8E872F89750FE5B080DF433714F432
-:10E43000437E7D10F5CFFE02C039249F849F804526
-:10E440001C305E5C66579ECAB397F3FC3E4FE08A71
-:10E45000DA8160AFA9013A879A2FE7BD8CF71B4795
-:10E4600026065E42BCCCB7F9072BC4B7FE11E417F1
-:10E470005DCAE1F0F0D8CA4B2A63D9C502BF3F9309
-:10E480001AE85C3EB48BEFA3EEAC4ED5ECF7FE8BF6
-:10E49000904709FB5BE95E4FE70E89EE133F221DB3
-:10E4A000A1FBB68F5CE96568C7A7019E50EE3E22CE
-:10E4B000B115F85E5E56E3AC452F219EB3E27C7841
-:10E4C000DE5FDE38492E77D1FAB9BE155FB901CFCC
-:10E4D0008352E78D1C8B740EEB9E772D7CFFD0E36F
-:10E4E000A5F1FAB938DED39687D2178FC2F1F316A9
-:10E4F000BD847C383A8EEEA1A702ACDC7D285D8D10
-:10E500007A541ACBD887FA60DA0CEF58F4B93FE4A2
-:10E51000E1E324DBE479B350CF1BCBF37D7E2CF910
-:10E52000371211AEA57152ED6C3ACE17BFA35EE85B
-:10E53000403F82CB84EF299519387EEA509E2669A8
-:10E54000118A0F3C64E0BD99C7E92DD119C9E925AD
-:10E550005F4C4A453BEE501B18D420BF0E0D34ECE7
-:10E56000CC888BF4F06123797D61F72DC9E0F75FEA
-:10E5700092061BFA0FAFD7A1FA133251AEBEC1F506
-:10E58000F14F5C7EF2575FA6C58EBF4F48E0780A18
-:10E590009E8B636193FF3838FB33D21383E73C2CA7
-:10E5A0006CDA27F0BD4D731C7759D17EFA1D847249
-:10E5B000D642F701CA1BAC71E797C5C51ED7A0F3B9
-:10E5C000E0391B0BF525321E88F6D721A973D5C279
-:10E5D00024BA174BE73BC1731A0B99C60F9EEB6326
-:10E5E000CD77CD3385FAE9AEC7ACF59A3EA77A2C44
-:10E5F000A7D583E3B4EBADB48F04CF29D4CED86FC5
-:10E600003AC2B6900AFCDCEEE5E51DE23CCFA86F0D
-:10E61000F4D73E5B13F7DEF8BBE86D552078002E8B
-:10E620008F369F217F7459F33E828B410FDDF08935
-:10E630006721137C52AA5B2236E0ED690F6EB87B2E
-:10E6400014D890C9FB051F8736DDED9F08E5F8BBA0
-:10E650000F26BE8ECFEAE27312330FD9642E174213
-:10E6600075774F9D68CA8BFA5DED439BAF980A346E
-:10E6700095358AB7BFE6C1275E594E4E8B1A11DF1A
-:10E68000DF3938CF6DCA3BA2F22EC88F36E5F5A828
-:10E69000F2A4A8F2B4A8FC405EBFCD1D192CFB402B
-:10E6A000DE3FF8D415F8FB9E6DFD2273F1058F3522
-:10E6B000F2B62BF0F77CCBB3F8EFD356344B3EC910
-:10E6C000243F2BBACEF35BB5F9A3100E2D2FA31C5C
-:10E6D000286B9274D4EB5D0DDB2394C7765E53BB3D
-:10E6E000066E3F96351CA176BDF63FD2467C7CEF88
-:10E6F000C8F7A9DEF9CE9FD80CEBEF5BF5761E7557
-:10E70000440A2C4E48EE7E7FBD6DFBDBDDBF2F0A39
-:10E71000DFDBFBF90F901C8DBA071EC4F9B8BAF9FC
-:10E72000C480E3BD23CFD27BB47F1CDDFC16AA03DB
-:10E73000F14BCE2C53A0DD9FCB8F8F437D0BDFB4ED
-:10E74000C57DE36752F812DC8F1E65814B70DC5B80
-:10E75000CB87EFC39F4C38ACB63E86EF956F78F011
-:10E76000E52B1498DF6177EB20FC09B74D096FF0BA
-:10E770007C722B7F5145FF1DE1E7F0A0D64136C8E2
-:10E780003F99C0A6537E78EB63987F3DE104AF3F8D
-:10E79000BA7590ACA30972F28AA990DFACC7E6F70C
-:10E7A000DA04AE371BF39B36DCFF53840B2BE3FB01
-:10E7B0000D5E3376803C9D5B726ADB6680C7DC1F32
-:10E7C000C5939CDBDC76DD55790487501EC611A607
-:10E7D0000A78D37E48725D217DA21FEE817DBAF159
-:10E7E000E91EDCE2A5FDE2D2CAEDA837A4CE1D45A4
-:10E7F000FB45A1C72FE9C9DD69381952A82FE93AAD
-:10E8000097EBB28DE22352EF72931EF5A0F83D0311
-:10E81000E03BA20F97C0CB36B19E6D09DCBFF680FE
-:10E82000671AF5F39EE47FC42163CA424EF2A7C57E
-:10E8300091BE72F306902B20D7D78979AF5B7B0905
-:10E84000F9296E463FF128FCEEEFD76754B7FEBFBB
-:10E850002E03F2AE6EBB6EDD2C7F3FF3B9F6BA0D20
-:10E86000BCDC905BEBD2797B63BF4AADE6E3A43EB0
-:10E8700078C9465C47BCC2287E7BE1EC111B97D16E
-:10E88000FE7F2DAD9FF9FDFDD00E3F5A3CC4867A28
-:10E89000A9819FC2E1FE5712603D3789DFEF35F055
-:10E8A000648C4FB7E2517F90417F403B353140EB64
-:10E8B000077D620C0F6EE0FA04D21633C19729ADC2
-:10E8C000E3F0FBFF2038B5FD2BE0F44F9F7747C9FD
-:10E8D0002190370CFB2F5F7ADC72FFED3F01D123D3
-:10E8E0002A700080000000001F8B0800000000005C
-:10E8F00000FFC57D0B7854D5B5F03E73CEBC929920
-:10E9000064264C9249C8E38440081071124344F0D5
-:10E9100031848851693B50D4D87A71203C022699C1
-:10E92000A8D5624BFF0C12790918342250C181021C
-:10E93000C55BF506458C1A70448A7AAFF68EADB782
-:10E94000576C7FFF08888F4A32A2F5D297FDD75ABD
-:10E950007BEF64CE24A9B4B6BDF93EDCEEB3CFD9CB
-:10E960007BEDB5D76BAFB5F61EA6F54C0A5CC0D8EB
-:10E9700066256ACEAE642C7C48F1ED61F007CF6766
-:10E980003B19FBF7B4A0D595C9D89FF1EF0AC6E6AD
-:10E990007EBF29275806ED8D2318CB612CF5BBCF00
-:10E9A000D4DE00D5B94B3F7A7C0F7C3FF77BA98C36
-:10E9B000E903EF438F8CC1F7EFBC6D5BCF2E84D2A0
-:10E9C000D2193579A0BC86F956C07BEF98584327F9
-:10E9D000F4F70EBE7A096355DFBBE5353691B1DB3E
-:10E9E0005D2A6393185BABF873988A250BDBE0BB59
-:10E9F000F02C4B644F11637D1153D80CFD75B82377
-:10EA00005B17C1B81DD795F9C2D05F1F637E86EF33
-:10EA10002D4BA5F73ADC3D4CC3F64B741740C20EA4
-:10EA20007EA1FA19D4E3375A22BB14785ECEC2769F
-:10EA30006C5F323E1286FAF3300E7D7F634A640FBC
-:10EA4000B6CF828FA0DE71A3371286FEEC2C624710
-:10EA5000783A76FA73321C8CE5AAAC05E1EF28828D
-:10EA60003A94592BD9CD0107E2CF3F719673000F2D
-:10EA70005F7799683EA9953D4FFF37F4C7D6DB7D98
-:10EA800063A0B0E1AB586FCF2678993B5885F86604
-:10EA90001AFC03B8EA1FC889ACC3E7CC5785EBB1B1
-:10EAA000DAE99F47F0FF205547F81FB6B335B60A9D
-:10EAB0002815D666CB00FC0B7858FB43000C633757
-:10EAC000E3008097FFD770D6A9C3F32B5D0AAD078B
-:10EAD000FCF96D558CCD67BC7DFEF2D477958958D5
-:10EAE000AA516B1A3C5B73A5BFC746EFB13F8FE2DB
-:10EAF000A50DFA0B32F1B725EE44BA09E27769D8D1
-:10EB0000FFEF9DBA03EBF0FD445C76F8BE74E0FBCA
-:10EB10003A17A3F9CF5539FCAC355547FC4AFCC828
-:10EB2000B24EC2D7FE903F713C394E72BFF7BAFC6D
-:10EB30003722BE00EFD1740FE245A5754D86D7632D
-:10EB4000896FB043FBDC56D57D37E033B8CC49F351
-:10EB500095F0DE9C1DBF8C150FEEFF746A739586D1
-:10EB6000F35FC6E99D2DB702E212F16219A8035DB9
-:10EB70002C64F163266588E75AF445847F5147C2C7
-:10EB8000F7F4DF2FAC89EF497E61BA9204BFA02B66
-:10EB90005DD170DD820A5F378B253E375036186EA7
-:10EBA00089CFD582EE245D24E37B35E27BD2607C85
-:10EBB0007B2C3DF9D86F709995F094DC3F6311FA86
-:10EBC000EE213BF00FD0DD1645217ADD72576A64E5
-:10EBD00025F2A73DBE17F1193A7C15AD77EF9214D7
-:10EBE0009DC12BDB2C30419433879D9C8F4B7A4AFF
-:10EBF000909F7A61CE7E589FDED7D59D614502C138
-:10EC000058F3EBEA2EA4FFDE67AFE6FDAC48D5195A
-:10EC1000D4438861183714FE432B03BC9E34C52CA3
-:10EC2000345E17E057C209FF7AE15F43C580BCE854
-:10EC3000C3061CBF8BCB0798E1121AE7DB296C1DBA
-:10EC40008CDB6C52FC26686F5E3A3EB292C3614325
-:10EC50003E6A1420359B589B5231C0F7CDA6132530
-:10EC6000B795F1360DDEBB85F17581F78E2A005F11
-:10EC7000A36D7D4C45BA45FA87F6A5D85E3480FF72
-:10EC8000E6F5BFF913C2DF7CC048178D8F19E7B1D5
-:10EC900034919E8A06E824B592E389D5B0C81880DD
-:10ECA000D729EAA9B5B1888A785A56CD4E02E966C5
-:10ECB0001EE99981F4E3ACEC64F3A10C7DC0FC1176
-:10ECC000807B4AF7CE9746C2FBEEDA583E4E37B409
-:10ECD000ECB68B4E5D34B0BE12CE4BBA37A9CC41E8
-:10ECE000E3D177008A7FBF83DE1B37FB82C4F26EDD
-:10ECF000FA2ED3A412BDF6E023E41BCD9FA3C038A7
-:10ED00009B978C32E17AA6827C43B9BCB07DECAE95
-:10ED10001584677F09CAB707D380CE099FBE2A949E
-:10ED20002FA5EEEA5FBBA0BFA7DCD5FF8D258E1314
-:10ED300070E2F44790BE48A6E764BD23DFCB2E6E99
-:10ED4000296F710CFF1EF017E12DBE359DCB0F4DC5
-:10ED5000A1FAA2FF30EF5C47F0694437B76D2F226C
-:10ED600079DCC0DA89DE1A59C482F4BBC8C6C2692C
-:10ED700040178BE0B57428176FB1323D61FD9644A2
-:10ED80008CF546210F6E6131FAFE967D49ED352CEA
-:10ED9000EA84F6261B8BA662D9696C6F667141EF17
-:10EDA0007FB6263E671D7CBE378B7577D744D4204F
-:10EDB000CC7BAB1D745706BED04EEB3365F94E5A73
-:10EDC000CFF40A7FD13DA84F5E35FB7601DDBE272B
-:10EDD000D64BE2E75E57F5BB88F714D544F38FDFD7
-:10EDE0006325FC9C02BD8DEB7F9F9BDD3C1BCADE37
-:10EDF00056DD3B7A34A2C95530DB3918CFEB9EB3D0
-:10EE00003720DDB8DD26C2B77C7ECC65A67AD5DD9D
-:10EE100002FF2B5223BB8A08DD13919EAA46497D2F
-:10EE2000CA26CE82FABB6656D709F5E6EB1D41EC41
-:10EE3000AF07ED07A817B8B9DE28705B687EB22E61
-:10EE4000E72BE906C6A1FE522EE2A584638C5BC8BF
-:10EE500041B6897F27F4EFE625293B49FFF6D3AF7A
-:10EE60008911FD96052C88D7E7845C794ECA9536C2
-:10EE70002B972B9A6BEE32A83FF741996F1DE095C7
-:10EE80009582DE83EF1B3F4AD1919E5EF9E85FEFEA
-:10EE9000FD19B49FFDC0A25BA17D01D218ACDB734C
-:10EEA0000A9747607F30D48F8DC0F6386EE3C1B1CA
-:10EEB000647F1CB408FB46C8CFC6B4E0D685D04FEB
-:10EEC000E393993EA064F6BC39F2E85E6C3F64F7C8
-:10EED000ED817E1B53385E1B9F1B49DF3F610F4E48
-:10EEE00077C33C73AD919F3C8172E3052BD97B675F
-:10EEF000597411C27FB6D3AEE07B27705EE95042F1
-:10EF00009B82F3EA76923D047C9AB310BE3BB936FD
-:10EF10009BCF4BE0E9E48609C4179BCD7CBCF0B3E2
-:10EF20000ABD7FC21C989103F5134F97FB564053BF
-:10EF30005FC012B5003D87EEE3765EBD49DF8178A4
-:10EF4000628753095EB91EA18D8B67627B68E9F207
-:10EF5000AFA37C1C8ECF51DEB304B9D9CBE205C878
-:10EF60004FDB1A467546519F748FF3915A655E5870
-:10EF70007CA01B177FF79499E3357EC84CF47CBEC8
-:10EF8000FDE37CB52AAE7F709C10C86526F98FE43E
-:10EF900072425D1DAACEC8FE0C3D972DEC3A63FB74
-:10EFA000EBCEE01D6EA0BFE6FBFFE79D6584DF387A
-:10EFB000C945D69E497C79CAEC9F8B74EBAE895AC1
-:10EFC000E627E8F30D82AFEAADC2FE63514B221F84
-:10EFD000CAF6AA6A23DDCB72BDA07F678CCBF7C1CE
-:10EFE000ED26C11FDFB4A21E9BC2416685A8471C47
-:10EFF000D8BF4EFD4FF9206AA9877AE1F2A8659142
-:10F0000028914F00DF511BCCFBD45627E76F4003FC
-:10F01000F6B36832237DB94805FBB5029FEB5D3D31
-:10F02000B02EA79F7673FAFA236005F03D8F89F71B
-:10F03000AC60EF821C7BA64D89E27E60DE16EB2E73
-:10F040007B11F2B55F75E27A6E57488ECD6B9B5699
-:10F05000B215EA4B0F5C40EB9F3699D3E5D2889B03
-:10F06000F4E214211FEBAD110BD9DF3F5118F2016F
-:10F07000F44F7674237C945331180F28D70DF41075
-:10F0800049A8835D34A593CB5506F29C25D84B52F5
-:10F09000DEA31C6749F69F913EC2521F71B9C7F4A7
-:10F0A0006C947B522EDFEB0A74B949AE8DCEC6F557
-:10F0B00085F5E47273BF42786D622DA44FA41EE8FB
-:10F0C0001F57E891D36A98EB2BEB262A5F7717D16D
-:10F0D000784B5927E913A95786A383D7BF840E7E9F
-:10F0E000867400ED8D1FB0E865305EE372166D9A90
-:10F0F000C84BE744D28F5C4FDAB89EC432E53CF48B
-:10F1000065B27E4CD687C97A30DBC2F59D5C6769F3
-:10F11000CF644FE776C094E51195C1FC36A6F93F60
-:10F12000CE9C3460D784DEB2D9F40BB11E60A3E06C
-:10F13000BDC569D36ECA86F690C6FCC857A980972C
-:10F140009DF07CBBB07B6BB339DD7B2D9C7ECD5AB3
-:10F1500080953B705D62B4CF8D673217D2A3C4E750
-:10F1600076277C5781DF71FDD4FFBD8DB5A5247C4A
-:10F170005FFD9C9DE4EAE7CF3A2356B24782856E55
-:10F18000E82FEB5756B2537B9F73923EED15FAD0A2
-:10F1900083F628D1CB2AAE5F715D272135558F6468
-:10F1A00048FBCA352351044AFBACC9CDEDACC1F6CE
-:10F1B00090682F8A5DCFE9CA4AFBCCCFDD3D7762EC
-:10F1C0001DE061689FFF8F58E7D081E9E5DF87E7A1
-:10F1D000A180C3C7B11F2C477AB5AADFB9DE06F4F8
-:10F1E00035435D1EBF0BE6D194EF70A19EAB29FCA9
-:10F1F000F52F6F84FA8707CCCC8AEBBC677A1D1B8E
-:10F2000035BCFC5D12319FE849E0975BF619EB4D88
-:10F210009DC67AA8CB582FC8707A4E4F20D9E1FBF3
-:10F2200033D0B5D5DAF2C14E80D7FABC95F4D1A768
-:10F23000EE607106CA5B53FC18E2D95AF8F144F447
-:10F240006F84BA3F51B0B402EDC4CA38FE91AF3FEB
-:10F25000B7CF2B740D81B701FC319B89F00CD63AE6
-:10F260002F49CE85049F782CFE0F5F84F92F9A9D3D
-:10F27000E2BA9B9EF8674EAA427B926064A12D572A
-:10F280007F88FB2D786F09AEFFE959F01EC0D5B01D
-:10F2900085EBC346164B43BE6D06BBD3064B7C477E
-:10F2A000065F875BDAE25551F8DF8E8CDA7108A7CA
-:10F2B000F6272D80F4B11AFB4DB093AFCDE07AE084
-:10F2C000967D76D729031EDD867AA82BC7752A91ED
-:10F2D000FF84FC61798A96B81F7A57095E8BF86BB8
-:10F2E000B2F558A6C1F857FCE93392F78B97CDA732
-:10F2F0007DC4805D6D25F9B4F8AE203D7F692BDFBC
-:10F30000179EDE6AD711EFA7B7F3FDE3E23C47C4CF
-:10F3100006FF7B859BDBDB8BE13B45198CC764BC1F
-:10F32000BDFFF0555EA4A3F7191F2FDCC9ED8FF7C1
-:10F330005D80AF62FE0EF6F77E17D8EF0AE2F9AAFB
-:10F340000F512E2EDEAEFAD04E60879CE48F59BC52
-:10F35000FDCA710B1DD8DFA723A6A15F68C795E87A
-:10F3600089C2F70211EED7895D01CFB51D17931D34
-:10F370007774BB95C3E9B6EDC5795CF12795F84A7A
-:10F3800033B120DAC71D16FF38E467FDE13D337065
-:10F390005DDE9F956BA2F71F57980BF1E15E968596
-:10F3A000CF172B5A00F9B761CB929989F64E6A862E
-:10F3B0004AEB35AD7079568F83F8E97AD4A34DDBEB
-:10F3C000817F70FCD96FFFF2464F223FDD5EC54C56
-:10F3D00009F6CBC35F237AC2BF28E06BB1C0D75711
-:10F3E000E52B6BAAE48B961294A38BEF6E29710D1B
-:10F3F0006157F4F3C5C39C0FEFCB50B8FF202FC368
-:10F40000B0CF186E5FE62835915EB1F9987F0F9402
-:10F41000D9B02DC6FDF7810C8DDA0F64707B5FFBD0
-:10F42000DD6DFB5E87794DCD086ECF807A21F39735
-:10F43000E3BAEB71573598B18862B2BBD8C3566E48
-:10F44000C76ADC8EDE9CC9F6AE4BD88F77627F9997
-:10F450002417F6623FBDC7FF780CF1DA5CF0F14487
-:10F46000B40F42E73EB3A01FCDD1AD903C77F80278
-:10F470000CE925D43D8B2D281B90C3211FD713C920
-:10F48000F3FA5306DFEF843C71EAE7FD119C7F3B02
-:10F49000DC9C3EB72D4B213FE4364FC48E40FFB578
-:10F4A0007C2AEDA525C2EF67DBFD945F45FA8E2827
-:10F4B000AE3158D7397FF435CC8DA830CE87BB8B91
-:10F4C000C9DFD977609A4F8536C7EE1FAD198578A9
-:10F4D000EA32FBF07D87AF270DE7F7E1EE9369385D
-:10F4E000BF86DD2ACDBB21F249D6C2B201B9F033C5
-:10F4F00025F83ACA01E6521C38BE940F1FEEFE34BE
-:10F500006B8183FB0B487F560E8D97A7DCD37E8ED5
-:10F51000DF5F71395F978F1EB74650EE7D6407FD40
-:10F5200096206F3F72727D772A43EEEF3A0B50DFE1
-:10F53000F4D76F2A35A19CF88E8BCFDF63E92C407E
-:10F540007EFC8D62EC67E91A138B806C5FB206500B
-:10F5500003F2E8A3479F294079FFE19E670AE62767
-:10F56000C097FC9D2C7BE578C26F26FDA81E4B340E
-:10F570000FC79BEFB3727FE5307E54F93EDBC2FDCF
-:10F58000A17D3EAB8E7428BFEB6B48F1A37DDBC73A
-:10F590006C24FFE6770BBFACDF3FDA83FB18F97D05
-:10F5A00052FF151E4E4F4A9742FE83D4B238C9E32C
-:10F5B000BF59DE7B603D13E43DACF3BF215F34D91E
-:10F5C000E2C74632A20F0BE2CDD2ECD0503F65AD80
-:10F5D000E4F415BFC344FB2A4BAED781F2EC8A9208
-:10F5E00094361330A227256D22C601F2734BE9FD34
-:10F5F0007035A7FB7016237F5B0E6B51485EBBB85E
-:10F60000DF3E6F3273AD83EAAC11DC9EF132DF1660
-:10F61000B598D65D41FF90C487D40B483F281F3F63
-:10F62000526C443F4AB74276A76AEA9C8BFD0E476C
-:10F630004F1347C8FD3FA7A7FEFA3F899E268F18A4
-:10F640008E9E823AD193D736343D093FF179BFCFB0
-:10F65000C201DCBF660B7CDD27E44EFC0E9BF49BF5
-:10F660002B38DF99A2BF9936475445FDE1337F9C83
-:10F67000E8FF7D18EC5FDC27E5A0FD0EE5C895F3FB
-:10F68000745A3716EB417F41EAC536D28FF79A623A
-:10F690004568AF648F6FD98F74913DB7AC6225ED2B
-:10F6A000FFF2DCA80F50B7921F745975E0D488049C
-:10F6B0007BE110DFCF34DFE5A7E7D3BBB97D101ABC
-:10F6C0006D217B38D4A584719D9B039608DA416B2C
-:10F6D00015EE5F096FB0EB3CEEA3AFA0B8CF0F748F
-:10F6E0001E178A48FF6FCF8EEF23BD3538C8EF91C4
-:10F6F0001C3F3AF885CAC71FC368FC8E721EAFEA6A
-:10F70000B85AE7FE15B17E1DB3FC396EB407D618A2
-:10F71000F959C685FA9C8018186FFE7A3BAD43AE46
-:10F72000CAF1CCD26D5CFF0C960BE467CE9A2C1616
-:10F7300046C46FFAF91C2405D67345BB8C3739CB08
-:10F7400002456879BFBBE9B7AFA400BD66A19F8E33
-:10F750006FCAC268F7937F98D7C97DFCA00900C91A
-:10F76000C5D6FF5C577369425DBC3FF0FDDC6B6B37
-:10F77000F248EFF6B723D8A08F65DD6FD7311E357D
-:10F78000D0AE81BD6BEB52F8F761C7B5578E063C22
-:10F790002872FCFF5CEB477FA19D19C64B844F4B41
-:10F7A000EADF0CFD3B74F97EBCF64A78E1C10A59E8
-:10F7B000BF66AD1FE0BBCF6CEC8F502ABEC78A1C62
-:10F7C000EFD6AC6DEBD6E70DD8056027EC1A913972
-:10F7D000601FAC7E7B66FB853056AAEB530BEA5D5F
-:10F7E000A9E7431E85EC8F647E3D20E4C3DF2C57E0
-:10F7F000F54176F4811124577B66204BC2FE83E4E9
-:10F8000076687980A13D07F64817C2DB7BFCE3D31D
-:10F810002F427BEFECDF1F1BA9E37BB7CE45BB3745
-:10F82000744E23BA0DED53230AD0AD4DF00BE871A1
-:10F830008A0B487A5AEA1274EA0E338C73741C529B
-:10F84000268589BE5A0AAE83B5CCF7F85F4238E404
-:10F85000BE3279DEBF1EC1F70FA1D2EAAD25D8FFB7
-:10F860006E85A19DB0AEF444D602DA37BD9BB530AB
-:10F87000E1BB255D0F123E97EC330F89C75F8FE028
-:10F8800071DEE6679FF6A3DCF828A2904C68D022D0
-:10F890006BA740BDA1C1849620AB8CCCBB91E21C70
-:10F8A00075163606E67704ED268463DF37C353709A
-:10F8B000DEF04F8147DB028B489F6EABB339284E99
-:10F8C000543AFF56C2832BC58F7858575A9D83E30D
-:10F8D00034CF9AE1A2F808D871D8DE7CD7B7C82F08
-:10F8E00024E15AD765AE453BA70AECB9A700EEFC68
-:10F8F0008C6B6A7DC0C723D5FDE5B73B305E3EB457
-:10F900001CFF6E26A78B362510FE4625F94159A20D
-:10F910005FB3B08BDB8D9F8DB018E22B9F8DE0F62F
-:10F92000ECA5E1D874249FC35A4F2ADAD321E6FF0D
-:10F9300004F7CF2CE0D0F7D03A7179E469D5C93F0C
-:10F9400066F3F4DC7B21B65FAAD1FE85693D0FE04A
-:10F95000B8BD6B3DBE754CF001D6EF2AA37D4FBDFF
-:10F9600027A87832F9BC707D7B9FBDAA1CFD88D288
-:10F97000EE5AFBA89DF4E65AA77E7F2DCAD3DF6915
-:10F980003C1FC0168F4D877E96FE3E83C65D6B8FF3
-:10F99000ACC5F50FEF54A9BDD8117460BF4BBEB90B
-:10F9A0006522D22B73444A508F9A3DED0CE918B66C
-:10F9B0002BE42FB179020CE3C4D3C3F33405F5452E
-:10F9C000923D331DFD55B45FF190BFB65AF0C71894
-:10F9D000A082D3366285B63F8F18B06F5EF9E31C04
-:10F9E0000D1F4ABBC764E3FEF39ABA1486F62D5B7B
-:10F9F000153F66427FBD27C6D00E6EEA54689CA6AE
-:10FA0000D2272DB86FB9A593F37748EC33007F0563
-:10FA100068578CF1A40A7BA08DFB3958ECD848C4F8
-:10FA2000F3637C3D1983F712FCAB8CADE0F240F43C
-:10FA30006711718626E157024D48ED3E8FB45BEFAA
-:10FA400016FDB7F3528CBB5989F955C46BB962F0F6
-:10FA500087CBF22AF17DFA91F80CE4DF38D017FA5F
-:10FA600097B62AB36EFD29CC6FEBA4F13E34C1BC2E
-:10FA7000404E6A053E075204BC57767D3203E98644
-:10FA8000D532E2D7E6AE696A9383C76FD05EC84EBF
-:10FA90006DD989EDD93797927EC6F8C86C78FE3556
-:10FAA0000FE7B31C07F7D779EF0E1761BC33FD489A
-:10FAB000E0D69FE2F817A490BF351BD6C69941E562
-:10FAC0001AF46F7959F98BA87FBD33F50A8447C6BC
-:10FAD000F5302E38AB8CE438D5337C8A7F179437D9
-:10FAE00078DC340EECEF6A115E7C1E710CC419D107
-:10FAF0006F87E3621C0FCBDE9CA8467E7ED0E77B3F
-:10FB0000904EBBAC2EC4D7CCAE97DF427D3BD3C664
-:10FB10003A29EE9A64B7C4D3BE19443AED3B737ADE
-:10FB2000C73D08D775077D94CF92648F5C7139B754
-:10FB3000CB3FDA93AA233FEC12721BEC471E7F796E
-:10FB40009CEF2393EDC8EFF6AF2FB723FBEB7F7746
-:10FB50003B92C317DEC3F328A47C0F897D5F5FC38C
-:10FB6000D934D45F2B3DD2AE4DCAF7D82DF23DBA71
-:10FB700087CEF7D076F2F80F864149EEBA2D22AE45
-:10FB8000E5F7CE43FF87BB84E4C02B7B53C34837E4
-:10FB9000673BED6497696E4B14E16A7BDA1AC13CEE
-:10FBA000883645E0EB90885759441C2CA344478382
-:10FBB000E2A02540723FFCA499C7ABD2228FEE850C
-:10FBC0007AE3E11C11CF62D47FF8D954C277638AFB
-:10FBD0009E8EFD37FEFB088671AA3E180FD7F909E5
-:10FBE0007B70BB87E25ABC7FF68255E7F1B3688928
-:10FBF0001BF0B033C2EDBF93A5A6A805E6BD93895F
-:10FC00003C9FF532AEC5E7D9B761248FCBA03182D6
-:10FC1000FBB2B5DC5F542FE35587B91FAE5EC4A5B8
-:10FC20004ECE5EF408A658B4292DB5B84FFB7CDD46
-:10FC300034F29FDF79FF2C2AEBD718FDFD8BD03FE4
-:10FC40005F3C103F967EF7F9CC67E1F6F380FFD07A
-:10FC500004F68CBE46AB46FD59C45C77A33ED0C3C8
-:10FC6000B07A1743D906251AF10A6019DED3D67A7D
-:10FC70005270BD57B799486F85DB4C7E7C4FD2CB15
-:10FC8000AB1EAE67DFF570BD03A88EE038B26C33F3
-:10FC90008B7883E86F053345B13429BC5CEDD26ABB
-:10FCA00087D2DFB2BF36738B6D1ADACDF926F277C1
-:10FCB0007F6EF1D791BF38A384D6A9CDD9B2A696CD
-:10FCC000B7132F7D6E8F07A8FD328D1B964CCF404A
-:10FCD00079FA8287C71792F1B6B0DD584F8EC32CE0
-:10FCE0008918EBF52C3836A798C70D129FBF20F462
-:10FCF000C4E7EB8A04BE7D1694BB72FE2BF238DE9D
-:10FD00004CF9BC1C955F5D8774300AE3CA45587294
-:10FD1000BF2ACC84E01F75994721FA4882B7CDCD20
-:10FD2000E929BC96FB21FF5AF893E1FED09325F810
-:10FD3000D8EFC5B865BDCB4271E8F3F597A4641A56
-:10FD4000F7B7FDF5BFFFFE96EFE7D7AA22BFC6457E
-:10FD50007269BE8BCFE5A4E2DB1BC5E70EB01F7056
-:10FD60001E6BD50A9423D3BFE9A079341F063982CC
-:10FD700071ACE53D05A8D79BAB7B4A305E938C5FA9
-:10FD8000845693F20CDE9BEF81FD08DA0D6B8CF14B
-:10FD9000B8C1F1557F616626EE7B4EEE7F19F5D72F
-:10FDA0007E3BE92FF8BF17ADC8FFCF16915C8B38AB
-:10FDB0008363312E144A89EEF87111DA31DC8E6AD0
-:10FDC000EAB6EE443B717E5B427C0FFFB3DE18EF78
-:10FDD000636B32C8EFCE3A8CCF1B1E4EFA6E50FCCE
-:10FDE000AF9DD665B325380EF91DF410E51D9C595D
-:10FDF0006262B8BEF5AA6F112AA93376A37D7EC6CA
-:10FE0000C9D76B46A6D43F3EB2BFFAEB83D6D957CB
-:10FE100082EB5C6F62C1C47E9A709D617D1BC53AA6
-:10FE20009F79FAE2125CE78FF75F5C82EBBCD9DC6A
-:10FE3000EE47BE297507AF41FC9CBA3240F615E685
-:10FE4000EF201F9D2F3DDE94448F37FDE3E8B12E58
-:10FE5000311F32593F36F4E3CBA81F3D163D0FE565
-:10FE6000C17C9BF52FEA49FC1BD29F67B392FFE34D
-:10FE7000F01F3FDD48F918DD2AD927B2BFC35AB0B9
-:10FE800018EDA3C36F797D6165F8FED385FDE5B5F7
-:10FE9000B130FA59E4BE40DA97C9F278B998CF0385
-:10FEA00099FEDF8CF81BE23CD27FDC20DEB1453EC0
-:10FEB000E576EF6EC5C7FDC79DE44F6E3E34CF8536
-:10FEC000FEE20F22DC7FDCFC7439F98F97445E8AF6
-:10FED000623E19EB565CB81F59B2FBDD34CC03907F
-:10FEE000FB5ED8E7DE9F49F935C6FDEF07919369C0
-:10FEF00098370070BF8F70A77AE216A4FB66D8FF10
-:10FF000061DE60B3163F86FD367B18D905955DC668
-:10FF1000FDA08CEF6E0B5848EE6EEB562228AFB367
-:10FF20002CC1A23CD46B2CCF753A7580CF2299FEA0
-:10FF300017907E07E2EAFE5D5897FEA79EADE94462
-:10FF4000BF3D66E677A13CDBEA14F24C23F9F6DB11
-:10FF500087DD91750976C36F23DC4E5822F3C134D7
-:10FF600016D560BD16CDF11FC7F546791F4D92F726
-:10FF7000897519AFBF8545492F35B19EFEBCB0C408
-:10FF8000F792E3F9180737F4C35ACA75F493DDE41E
-:10FF9000F0519CABEBCF56637B98EF9B811F96553E
-:10FFA0000CD0AF5C0749BFCDC21F1D6A38B10AE94A
-:10FFB00037D4A5B8707FDDE8E3F4DB08FB2FCC9BDA
-:10FFC0004DE677D669CC131D8EFF7FDDCF779CFF82
-:10FFD0007F3DAC9CFAC7F85BDFEF973F9CEFE5FCF9
-:10FFE000A5FFBE7F9EDD0AE7CBA47925EF5B93FDDD
-:10FFF000EE72DF79BEF2F08B247C7CF10FC6C77005
-:020000022000DC
-:10000000F230256BE8FD42725CE3AF9687FFE0F8C3
-:10001000C623871E4A3381A8585214F672BBCE6F8E
-:100020008817CF501D7E1E3755793E4572DC5D9F87
-:1000300021E2EE9C9F5F7A5AA5F56A12F1E1A64390
-:100040004E1FBEDAE0584CF1D9E4F8E952B67F060B
-:100050002E51721CB511F9B8F8CBE3A91765393DDB
-:10006000249F745684790AC9795A2F393E1D114C40
-:1000700058EFEA32D8080C41D7362DCC32129E4FB9
-:10008000CBE2F6F44B229FC86BE1E705EE73A6FACC
-:10009000711FE335F17CA77C4F607AD62494EF0280
-:1000A0009FCFDEC04C809747CC9D244FC24D0E1F82
-:1000B000CA3FE9C791FDEF10718BF3A5F36F671984
-:1000C000E9BCBFFE4FE2FB8592BEFFDAB8DD16C089
-:1000D0008D811F18D1EF6B18672A1A4CB7C3F533FF
-:1000E0001CFD2ECB0ADC9E4578F14FA4FCE6F39470
-:1000F0002FA995F193E82F6207AC3AFA376DE2FC2D
-:100100000B5B9F23F6EBBEAA599497CDCF8FC87394
-:1001100036C3D98F1BFBF99FDB8FFDF5BF93FDC85D
-:10012000DC81769CE7A9697ECAFB5FED04F8715F0C
-:10013000F8A875C8F32CF2DCC597F95DF6F6C3CDC7
-:10014000E96AEFB070FF63E5E793FF34F9F9FB3438
-:10015000F4A30EDF4F58E47BC6FC229EC67625F83A
-:10016000B743319EAFF79280573E7F44E8C5F46CA9
-:10017000FF515CA78F8FDB6C2C1D4C9E4A2E179B6A
-:10018000030E8A2F3477F2BC97E6E58CE47733FAD6
-:100190004FCBD0AF388BA1BD373523F833FC7EF57C
-:1001A000DB8EB09A8E7EF7D90CEDBBDEE3BCFEA9E8
-:1001B0003BF8736C0F2DEFA17846C7EC8F28EFAAA0
-:1001C000EACF9FAEAAAD2478C98FE0B11ACFAD7C3B
-:1001D00091C5E30FB2FC43BF3CF1935FFFE3069E82
-:1001E0009F1DF2F85DE88F907EF1543D467EA6E6B5
-:1001F00003DC68AB52F97CD8F7F3889E9A0F4C2B3E
-:1002000047FF29EBB497A39D5BF52B07EDF73EBEA7
-:100210002B97F224EA3DC10F513E3A2B2357A35DA1
-:100220005A08E3A0BDFBF1FEABCB116E29FF36A34C
-:10023000FF1CC6DFEC34FAC7998DE7D92FDD9B4F41
-:10024000FBCB6247F053EC6FB39DC311DE23CEA30B
-:1002500008BF7932FF4BBECF564D344EF6B76D1402
-:100260002F977261B399056DC503F2E478962EF26B
-:100270004C445E63F72C9EA722EA0E8F31BFF381B8
-:10028000CC2B8F233CC7B3B4AF961FE618942F40F6
-:10029000FD627E18C505589CFC2DA9E7B81D3DCA16
-:1002A00065217A7202DF519C06E809EDF94BE3B152
-:1002B000E9789E6B7447F452C4F3E17326C2933617
-:1002C000EB358AD3A42B7CBCE2F53D6BC7A21FC6DD
-:1002D000F5E665B8A47ABBAB1A513A3523909F4D29
-:1002E000FB8C96521CAFFABFCC3C9FF2502AF917F8
-:1002F0003A0A1A299FB2F76DABE13C4E7219667744
-:1003000053FEE4A8AE5F50BCC0794019322F76721C
-:10031000B683F0D61C8ECDA01C9B4B3D2467B54305
-:10032000BFA238B5B6564309C4DACC7E139E430B40
-:10033000AF60E4EF1CD3E132E17A158AFC98BEC3CA
-:100340007F9818A4FD8A8C0F44787E93B96715EEC8
-:10035000C3B4153D9787713D0EB84DCD65D85FBCD0
-:1003600099FC2D875219D24F6157F1DD53A15EB828
-:10037000C645F1B0BEE76E2924FF2ACC73CC10F33A
-:100380002CCA36F3FE0FA59A509F699B980F47D54C
-:10039000DC59D504F78350877E468A3C55193F4582
-:1003A0003F14EAA9F4ECE0D7303FB6FF1CD2B214F8
-:1003B0007E0E49E3FE12E7B2B71FC7F33D3B2CFCAC
-:1003C0009CE791C3136693DF6FADA6E03A7CEEE63F
-:1003D000F99437669B0CE74206F07F84F256471D7E
-:1003E000FA05D76B3016F6AF9939BD686B3D3BD136
-:1003F000BFB8382D4879BA97B545558A9FB94E3D53
-:1004000050AB27EC73B6703DD3BC8FEFCB93F73571
-:100410005FA65F6ECB36DA2DFDF57F92DDF283FEAF
-:10042000F1FFC6FD0A33EEF392ED97E47DDD203B4C
-:100430003CA9BFE1EC18998F523D300EB7A79DD271
-:100440004E0A1BF275AA1DE27CA1CDD8FFE5235C04
-:10045000345F99BF93B5525F8179FAF11F30F2D7BB
-:10046000C93CA27035CFF7099B6C74EED0CBDA296A
-:100470007F68248B2A0AF9D37AE87C6D36E611C1AD
-:1004800077EBB24751BFDB996F8D4AF25257106E2E
-:100490003BE69F50BE6A64EB221CE73A078D63C7B8
-:1004A000FC938B3085C0BF15E5EBF4061E5FC805D5
-:1004B0007D8CF49B3B9AD3A1BD8EE7A1C83C1399D8
-:1004C0001722F1502DF09B3B765111CAC1B54AF06D
-:1004D0005171AE99CBFF0D4E715E19EC6BCFC079A7
-:1004E000E43EC6FB0F3798F8796437AF778CD1F9C3
-:1004F00079A02FF839BB8E729E7732283F2509AF3D
-:10050000323FE5C9B4E011E497E4F3CB924E12D642
-:100510008FCE476F3BC4EDFAEA060BCDA36FC9350A
-:10052000E497EC5B6262A8FFABBBAD9CEE92C6DBCE
-:1005300056676151EC578BD8517ECAF5FF32BB1616
-:10054000D6B514FDBE475A6B2F3A05383EDA1AA0CD
-:10055000B2CFAE74AA17D2F9D2B928A99ED8F2F9AF
-:10056000B55A0EE6DBC40B142099E7B77E3493EA44
-:1005700099F177B0FEEA16CFD73490C37D63E23BA2
-:100580001478FFFF797FC4DB911673197BF7A1877D
-:1005900066861D5F41DFFD9125E7719C41BDD3C497
-:1005A0007A56C5C85F24F45D2597875E8785EC255C
-:1005B000AFC83F6535221F15233B505F99534E71DD
-:1005C0007B07D30FC4B03D8F9FCF8276A2FF956388
-:1005D000B87FDA26E882E549BF544F18E5DBCA2226
-:1005E000377DDF2F8F0F5823DC3FC6C77FE3E90B32
-:1005F00028BE25F36A1973E5CFB980F26C0CF5FBC0
-:10060000ECE21CA6E6CAC773EC2BCDC2EE15F5369C
-:100610006730C58BF3443E047BEE8D2BBF5B867C3D
-:1006200074E6E0F747A35CBBCA02FB8221E4D8EE84
-:100630001C2EC7FACC8E350A7C57E30C8EF0C2FA1A
-:10064000BF953A77061E29A81B31CD82471758F867
-:100650005115F19A29E8C43D87C3E7AE0928987778
-:10066000BAD2CEC7CD0C6A7E3AF7109CA35C077055
-:10067000AF54B8BC868FD2C98E2AD5D3F11C61A3E2
-:1006800038D7AA0AB97149E72615EDF59FB7BE35E7
-:1006900055D306E0FB858887FFA2C8783EA2DCCB55
-:1006A000ED6259CE56F50B90FE56ADF0BC36F31206
-:1006B0007CCEE9F8CAB4659598A77D556A4B25FAB2
-:1006C00069073D4F87E76509752B7FAFD1162FC0AE
-:1006D00073E60BEDC149888FCFE7BD7B27CA873B07
-:1006E00073DF7807F324DE300B3991AF88F5EE988D
-:1006F0009E06EB79ACD82DF23C6C440FC7C6723F16
-:10070000647F1EDB3885F2FA66CEE1E749AF65B15A
-:10071000B61EF89E9C15D03E637211D9913345DE0A
-:10072000C58CB70269E8179871435C43393A9C5D00
-:100730007495D7ACF724F0C3D5BAB17E6DA9B1FEDC
-:10074000359FB1FE8DC97F1A9B587FD9EE9F8DF4DE
-:10075000F4BCC2F33EC3973017D1BD4709A3FD32A5
-:10076000E1995C710E97E727FEABD8773D3399513D
-:100770007BD63EDB2E3C3720FDD7AA689FE065B6CE
-:10078000C20C7EEF03EABBB822F21C3D14D3610712
-:100790006F75713F2EBC6B817E0ECED3893FAA460A
-:1007A000DA52904EB21C267639F252A58DEC9A237D
-:1007B00082EEE4B9EA2A8D0530CF02869C83E51BE0
-:1007C00066D78BE8A70E7FC818E7DB691AE55B8A56
-:1007D00031185B41F587045D1F91F2FF079A585766
-:1007E000E04018EFECFA5C1E872E65745EFE6C65C7
-:1007F00009D525DD4BFE01AE1E8DA14145F427E94B
-:10080000F9A74E0BD1837ABF49F8BB34130259EADA
-:10081000927080B8C9423DC9C8FE9571BA7C9B6C84
-:10082000D7FCF87E0E93757EDE2B4BD4A1296AAAE5
-:1008300040FDFCF2EF487F3B7C419C8725CD46E79D
-:100840009386E3A35D827F7625F1914BBB9AF8E80E
-:10085000A7CE923B08EE6B9C2ED4AFA53097BA0C76
-:100860002AFD232AF03BCE4F6A8A4F47BEF966ED38
-:10087000F1A95A829C86EF9BF8F7A9C6EFBDF07DDF
-:1008800046C2F769F07DD9E0EF773B6D51D344EC78
-:10089000A74AEF217D18A5C95E23E6AD66F1EFAE4C
-:1008A0001179B1A3D3E07DD45BA5C63C1336D967DB
-:1008B000A3FCE4A4BC92AB94E539C85757DB9ABAC1
-:1008C0007BA0BF97C53A5E650A7EE682E72FCF2DF3
-:1008D000398AFC576B8B6898D7772D8BAEC2C5EDE4
-:1008E0009B167CC45D4CF2E159E4936635383603BF
-:1008F000EA67CCEDA36F2D22FE79CE9B39185E49B5
-:1009000027125EA417A43F492FC970F7AFE7D73B62
-:1009100029116F3BD851584ABB8AB1169E77ADE773
-:100920000FCC0B886886AD6534DA352F2F0993DC40
-:10093000B8CAFD00E565BD9C1BFC4F946775177E2A
-:1009400052A0E1CBDE796371DF00F0C6FE37E1959E
-:10095000F6E3A0BCE30F2D86BCE3E1F84C8E1B420E
-:10096000BB50C5FCE49D94471C9AE3F0E1799110DB
-:10097000E6C15652FC8AECC2E7146E6F87159BB035
-:10098000E3CE373F99717BAFA9DFDE33E4D77794AD
-:1009900073B83B6ED5E5FD35DC5E9CC7B83D394B81
-:1009A000B42F7451BBCCC3EFD8C9FD861D4F8FD572
-:1009B000B15FB003C97E60E9C2CE2C32DE9B837F7B
-:1009C0004AD640DEF86633B75FB7997C5594E76244
-:1009D000E1F7E29C91FE8C317CFC64FF626E8E62DA
-:1009E000884FF7D7FF4EFEC55277303F07FA5B5866
-:1009F000E62F504C0817F733027D3E1C6398FED655
-:100A0000321AEDFEAB59CB9BA662A2CFE21CA4CF5B
-:100A100009409FC506FA1C9D93C9E524C225E9B388
-:100A20009F2E4B93F3CA8217603F1DEECE5F35A316
-:100A3000BDDC6DF5F1BC5A9E27982C0712E059A039
-:100A400071783CAA4AF04CC27193E1391F3E49A427
-:100A5000CF6CC6F961387EC9D658D85931C02F2F0E
-:100A6000DB8335087F3FDFACE2FBA34170AB0EA216
-:100A7000AFEB6FE47194502AD747184FC981F167E3
-:100A800089F1AF5FCBE9F0FA7FB110DD02F8518454
-:100A90007FB6689FD5DD447954B36BCC2712ED0047
-:100AA00019B7A913EFCDF1949B9105E6CC34C64B51
-:100AB000EA6EE2F19AEB588B19E1BD7E8EB19F3A56
-:100AC000B6FE13CC0BABBBC9F83C98D31F67198B90
-:100AD0007196A3C28FD007FC82FCF4D3CCC50FDF84
-:100AE0000AF43BF6876515E877BA326BC9EE4D50CC
-:100AF000FFF1B6F154FF69D6B7BFF306B6EF28A1F0
-:100B00007A0D26B9E13E08F911F54DD58DD714C1FE
-:100B1000B847EDA2DF5BF939026F4AB06316BCE754
-:100B20009D388AF2216B84BCE95BC8DBAFBDD0C9BC
-:100B3000535E6FD6C9DF5893C2EFF579ADFCBF2B7A
-:100B4000303FB76694A8573C3F1EEB47954FE81ED1
-:100B500080DE268786F86FCEE57EDA09A54A741C0A
-:100B6000E0A52643F4DFC4E735B3E2D15CE48F9A15
-:100B70006ADECF04DFB4B5C5F89EE92CD57B736D72
-:100B800069280F259FB5E770FD2CEDA980E0FB6774
-:100B9000FCEFB68D807E0336C587530C4C7E97DF05
-:100BA0005FE5E0E7CB02FE220DFDBCD3FD3C7FB349
-:100BB000DAB62207F7E75F0F5A2A715E2E5BF9510A
-:100BC000B46FD2274F9B44F9BE3666463D0774DFAB
-:100BD000417C78F1270569486C0E23DD4BBA9A25D4
-:100BE000E9BDC648D7C0AFDB7232BF5C5E1BE8DA36
-:100BF0003E40D7C3D9B900D78F09AEA946FDD53F2E
-:100C00004E125F268F3B9CBCC0BF44793A005F27E1
-:100C1000F15F1E66C515237FB64BFEEC42382CA64D
-:100C2000189DB329547CE3E960EA307686842F1F4F
-:100C30007DAE1583E1C23F4DDA7FFCCF83FBF23CF2
-:100C4000D10EDFF959C6005C30FE2B240F577178A6
-:100C5000B62B2D5CBE087B5CEEE79BE57CBB8CF382
-:100C6000AD4AE1E7DEBDE87721DF7BF9F87EB8CF5A
-:100C7000631DE47C42426FCFB1059C1698DB75EE94
-:100C80007AA29F1B58F869B48F963983FF17F174C5
-:100C9000C4143E84FB9C85CC4FF157A08F77721211
-:100CA000EC0D096F329E9A8791A7C9F349C6CFC050
-:100CB000BAC5C8BE93E7D8FAE77B9EF3947689C796
-:100CC00062F4776508FF5486F0472145A17E9EC9EE
-:100CD000527CB82F98EE53C8BE98C96C249767D63B
-:100CE000727D9EE1E0F687D4FBC3F1C7159733927E
-:100CF00057331B993837C7E7954C87D9ACE70E2C8B
-:100D000067DAF4AD0B90EFD14ED107E09FE9E07EBA
-:100D1000ECEC5C213F58CF24D4F3FDF5417ABE675B
-:100D200012CA9FE4FBC9669EE3FED28C738CCA99FB
-:100D3000BE7727A19ECFA8ED998472CCE9F27B7390
-:100D4000270DDC1F988CC7D1B92619873B2FFA4C89
-:100D5000E61F193F6B7306C7E238D2CF714689553B
-:100D6000E14B151E97E83F588474EC76154D43FF10
-:100D7000C51C1BE82318BACB15BC3017E9ED8F0052
-:100D80000F6E0EF155C0E37535C17B343E2CE1E1A9
-:100D90003681872B855E3DFBB04AF1891A7FE94396
-:100DA000184208BD626611E2573FE94579BFD8593C
-:100DB00030A0A2F8FE634EB23316BF5A4FF195B180
-:100DC0005B4C4C4FD093E32229867B3226ECCB3010
-:100DD000D42FE8CC35BC7F61D728437B7974BCA184
-:100DE000FDA2572A0CF549B12986F72F7EABDA50C0
-:100DF000BFA4E71AC3FB533F986DA883C6D070DE2B
-:100E00007B9F55D83698F765F16F19BEFFCDB6199F
-:100E1000AF60BCF3A4D8F7B2B03F560A785820E9C7
-:100E2000F6DC7C637F5125AA5421DFF3BF05EB7903
-:100E3000BEF634C05C62BF0BDB8DF6C4E22DC67A11
-:100E400043F7A655281B07E779B454E35539C97908
-:100E50001E35AE7926A4CF502ED817E31011EC62C0
-:100E6000CC331B8ECFBF6CFD4BD8E82F5B7FFEFED3
-:100E7000160BD9F58B5F7DAA2A0A8FAC5EE3FADBED
-:100E800075E3FAA7961AD7DFE933AE7FFA64E3FA7F
-:100E9000BBFDC6F51F516B5CFFCC8071FDB3EB8CC5
-:100EA000EB9F1334AEFFC806E3FAE7B718D7BB7061
-:100EB00099713D8BC24B0DEDC9EB2FE565F19ADBC6
-:100EC0008CEF017A4D097420E96841A081F277C660
-:100ED000B47FCF304E323DC0BED144F7BFC13E6E6D
-:100EE0009B72FEF401D28AFCBDC9F4F16FB9C2EE67
-:100EF000147401FAA813E50AD8174F61593756D868
-:100F0000FB81A1ED0B29BF12F579E2BE7838B93625
-:100F1000484F897DF2B07A0AF7C9F6817DF270F404
-:100F20007B1CB38FC88E5A4F7EA51B5D1C8E4FF164
-:100F3000D125E8CF7D82F4F271007032C07B1CE7CE
-:100F400003E31F4F9940FE8D6FB328D9EDFF82193F
-:100F50009630D8CD98A8ADE23D4F3A95F5426F2F27
-:100F600014FE8F85F6E05BB9DCEF519885E3E6C5AA
-:100F7000E8BC147B6DC479DD237102E30820784F4F
-:100F8000611C01CA5E3BA79BD352AEF899EE49C0E3
-:100F9000E7FCE94A29D9B56A0AE53DCDBF4121FD03
-:100FA00034FF7F781917FA2CB95CB94CE2B35DD8DD
-:100FB00003DC2E48C7C39A1477624107E1CDE7C22C
-:100FC0007586FEB81FFF47FC7CCDE30AD32667D0A9
-:100FD00031335A675C6F3C0FA5DA389C8F9B990DB3
-:100FE000F1398105C90EBC5703D1C6FB1BCFFB7B72
-:100FF0006314FAD354F5FF7CAD06E3CF382EFA9F85
-:101000001D3E86FE66D5EB63E8BF1AF4FCC014BA39
-:1010100024A3BFCEF87BF88778917EC23C412FBBDA
-:101020009D8CFBBD92FC86235590C098BF63E6E77C
-:10103000C3BDDA16BE9F3CE65B634D9837636637E7
-:101040009EE7FB327B08F36D4F27E4C7C3BA0C79E8
-:101050008FE9B43CAEEF57B6365C8671A25E1107DD
-:10106000BBA7357819AEB7AAF9282F0EEF5772270C
-:101070007C6FF1407B029F6A8E0643DDEC08105EB8
-:1010800056B5B610DD98C53D50ABF36E730513FC35
-:1010900012178E14F6862DCC5C594C98C6F0F7C109
-:1010A0007486F3555DDAE9C47DA8D50BFD25CA2BFE
-:1010B000AD9025FAADD7B4B610DCAB9460103BB35D
-:1010C0008E66513BE0DBAAE1595478BEF52A92675F
-:1010D00016E76D3EBCF76738FC59BDDAE78972C880
-:1010E0003FD22887EE6FB55D8EF85AD9BA8CC69379
-:1010F000786B6F755D8EF58DAD5ED1BE82DA4DB5C4
-:10110000BA82F4711A6821867116ADC789713DB033
-:101110003319C603CD5E5B0499C8EAE1F0B2A305BA
-:10112000441F735D1C06F48DE5037DBCB3CC4CFB02
-:10113000D3DBF31DF4FEEDAF8F79D10F7C60011E80
-:1011400051FF8AF9F48F23F06711728869C100F2A8
-:10115000952557237F74866B36ADE3DFDA9FC4BBDA
-:10116000C5CE281FD492EF20BBEB7CE10C8D14F789
-:101170005009BC27E30FF04472F47681A7DBEFE25D
-:101180007EBEDBEF6094C7CE96C15FD5005D8D1447
-:10119000F2259B05A86C6F05C15282EB6563410B7C
-:1011A000E875D6492FDBD1BF83ED7ECD8DA1EA4D09
-:1011B000359E59586E9C7CAA1DD9F1BE4B3F8B6160
-:1011C00089BE74C497AB8145F0CC1FC58E3D781D98
-:1011D00035AFA789F6B43A5E4F17EDE9015ECFF758
-:1011E0003FA9D4206049F1977C47C6D5A351BE2DB5
-:1011F00060FC7CB2B8E7603B13F2C29131AB06DB16
-:101200006F6274BE40B6FF50B4E7384EAC29463921
-:101210003CC7F8FD5681876CC789F6E9149F31B643
-:10122000CBF84AA6E3EC2BF47D99B1FD41F1BDD397
-:101230007136361DDB471BC7DF20DA531D3CEF0834
-:10124000C4213F472FDAEF15ED766CC7F14B8DEDDA
-:101250006BC5F82B9500AD433F9F89F8E48E569DF2
-:10126000EAC97CF6EAC80C7E8E59F0996B191BF21C
-:10127000DCFCAB2379BE4C9ADEE3F70F210F657BD4
-:10128000864BA3B8AFEAB5101D591D428E083EEC3F
-:1012900097234A8B8F1317F7977F193D03E17E8EB3
-:1012A000F2AC00FE909EF3BE6362C1047996DB98B7
-:1012B000C28209EF7B176418EA5937E51ADEF7CCCA
-:1012C00019656877548E37B4B3583EF1C76D82AE56
-:1012D00052CA2A0CEDF2BE02A6733E9276B579F49C
-:1012E00014C37B674BF574A4EDD357CBFBAB7C36B3
-:1012F000940BB7394765231FFEA475321ADF20EF20
-:101300006CA27489D24B47C956B6EAA25E4AF5C7A9
-:10131000DC3CAF7A65AB8FD78B189D6F5ED95A4B8B
-:10132000F5C7812FB1FCD7563F957BA00E160EFB5B
-:1013300011F4AF433F3BA17FAC3F02FD63B91DFAFF
-:10134000C7F287D03FB66F857EB1FE10C085E583BA
-:10135000D00F3E7F00FAC7FAA6D600D5EF6BADA33B
-:10136000FA86D62095F7B636D0F3B5AD2D545FDDAD
-:10137000BA8CCA7B5AC354AE6C5D43ED16A1371FBD
-:1013800013E71F1F9BC6CF7D27AF7F469EF2D5EE8A
-:10139000BBA804455E65C893C8C8C37D75A7312F37
-:1013A00010F14770D8391E93E1182BE018CF622B4B
-:1013B00052B9DCA038EB982EDFDDA9C0A7235BF87B
-:1013C000BA1775C5A93DA7818F3756CC9379C22C22
-:1013D000AF8A1FEFC5F77A9558752A8F37931F8309
-:1013E00079013F55E2DC339179C484706993417F80
-:1013F00027CCB31F5F6E0E27E26D28782BF2787C26
-:1014000043ADECE4F79BD4B64791CD52FC2D74BFAD
-:1014100089AD2E10D5A0F40482744FC2F8733360E6
-:10142000930572EDDCE54C8732AFD1B8FFCA5D5051
-:1014300061D8E7A8E73632FD22E8B7CCB84F4A19A1
-:101440007D9BE13B5BDEF70CED16CFDD86F6F9B751
-:1014500014ADF2223E47328A3B59D7AF603900D7EC
-:10146000C28E4D045750E0BD57D1F9FDEDFBC5EFDD
-:101470004408FBFFC72E812FDB7ADAD78E75F36A1B
-:10148000497AD884FAE7E3A7D2498EEE7DC444FEB8
-:10149000ED712C6242793301CC486CBF006F7256FB
-:1014A000E9CA1C15EBE54C57B17E118BD3BE08EC95
-:1014B000FF3AA417B0FF1FB143FD4C7EF0C73CBFFD
-:1014C0002B4A7ABA44AC6789DC076DD192FDC373AD
-:1014D000F3C85F633C07D626F6012BDC55D918EF1D
-:1014E000ED1D26FFCEE9FDD6D405B01ECE9C3A2ACE
-:1014F000E5F30DBA69C873D1CBBE2ABF6C013D625A
-:10150000E4976508FF99CA9F67A1BBAA79749CF804
-:10151000A6CD2CE5989E8E726CA0EE4B27BBA23B0D
-:1015200087F0A389F5D9DB1AA4FC00394FED77D3F6
-:101530005C980F5622F24FF7B5DE3AB526211F66AA
-:10154000B7A0DF5216AB453D5A5A66F245A827AF01
-:10155000C17F611FDDEEC773FA5A05F3A1181EC7DC
-:10156000DAE9BCBAF6854A7940DA914B980E76B042
-:10157000C31165E1B2817E99F0837C47C8F5CF5CE9
-:1015800035340FAD40DA473ED4DDEC33873F867407
-:10159000F7598799B3E509637BA983919E5B546AE8
-:1015A00089E80AA623B4D33D8BDA0E85E515211C04
-:1015B000D3BDF3508F1F4C25BA4DDD524557C37B29
-:1015C0004CC1F57900C7991EFDA0491A57F05ED3AA
-:1015D00004CB2EB41BC7225E709CD1A584C7856244
-:1015E000BEFB5A57109E9E15F368CBEFC73B87870B
-:1015F000F9FC78CFE9A20EE9BF31CE734365F53728
-:10160000F0DEC6953155D874467CAE33C726CE532E
-:1016100006E002389F453855849BFCBF7C7E4D8F89
-:1016200070BF19C8B15A8ABB4E32B1C4B8AB2CA333
-:1016300042FECDC87311BC4EEFDCA90B2E4AACDFC5
-:101640004474FDB8C2E71F766A3C2FCDEFD713FD77
-:10165000C4EBE47E599C7F4811F0F6DFE3369EE749
-:10166000613A586C0BE62D0DB71FFE252ECAA4C497
-:10167000FD30E81818579D64A33C9F75328F4B7F4F
-:1016800043C77C332CF1FC8A4DD0E96AA731AFE423
-:101690005C1EB777CE89F5E8B371BEC6B8647956DB
-:1016A000C2BD17DDF5E4FF9171CCBE6E9E0F2EFD1D
-:1016B0006B4B0409F41DE578E87B58A5F8E592EE3C
-:1016C0006BF97DA1871EA07B56A12F1DE9A15EBCF1
-:1016D0005FBFC6E8EF59B03BB02A451FEC575AC46C
-:1016E000C2E4D748F62725FB917E9B27F6693E5634
-:1016F0008E71CA93EB8B8FA5E07EA688D1B9DB9162
-:10170000EA93748F3158FBED784F292BE3F7F424DB
-:10171000AFFB250516C2F33EB9AE631CE467D837AC
-:1017200089F3FFBE17CF7E7D0CF4F396AE18CE8101
-:10173000BCA59B098FE381AEB1EC64AC76A8FBA09D
-:10174000B2F34D5FEDBCC0A5C6DFD768EAEA3996B3
-:10175000AA93BCCBCA0778FA8EFD3EAD8CF8274E13
-:10176000BF075157C4E141B8F1FCCB7ED3277313B7
-:10177000E9607CBEC6ED837CD35793BF3546B8CEB7
-:1017800094BD99750D876B1CC2D51B3D919568B7AB
-:1017900048B8F60F73BFFAA55F154F938DFA200175
-:1017A0004F53FF129EF65B86866796C0CF4F8EF230
-:1017B000FB4206B77F45FDD56184F7CC63B1EB51A1
-:1017C0003C02BCB3087FDE5359143315F8EBAC145C
-:1017D000F45929E48E8FCEA8B0D0DB17537E5EA7D4
-:1017E000C6DB43772E8AE07902DF8B0B0AD1DFE07C
-:1017F0003C6EA57B9E42497922B25C2FE6B13F57F1
-:1018000019120FABF3B9BC78F1B5F9D4DFBD6F593C
-:1018100019CA83ED22DFF55E57A70DEFEF9578C467
-:101820007A0594214B7C112ABA7B2B3FB3E98E2198
-:10183000C633F1F1EE4BE21B399E2C57E49772BB95
-:101840005439AAE23987FB2E7D93EED9BAAF5223E1
-:1018500099FB37E37F7D12FEA36F667D9DD3CB8A14
-:101860007CF4A32AEFA57D03EA2125FEB332C49FB1
-:101870002548F30FBD6D653B95C1786A14F42BE7DD
-:1018800027E72FE1765EB680CE99E07A20E0ABC5FF
-:10189000FB524FA40BBD87F3223D71A9C6CF894CE3
-:1018A000D2685DEF9B3C85CEF5EC17F914F14B2C1B
-:1018B00043FE2EC333026FF79EFB450CEFA90D7755
-:1018C0009BE95E05A6F578BF0974147A5DA37B9A3F
-:1018D000819E6AF1DEA8175F3B9B86FBE803F966F1
-:1018E00082FB403E97877DE7D45A3A6FF3DA672E42
-:1018F0003581FE9FCE57855D128BE1399A8D15FC9F
-:10190000DC8043D8018ED74E3520FC8EC9DFB32A48
-:10191000097A764FBE95BEDB688967F9300E744848
-:101920006551EEDFA1FBEFFACF0BBA381E9A2B8F71
-:10193000929DE0E8E6F7E23D9DAF135C08F7417841
-:101940009E32EE33573DB657C278A306BE77BAF83B
-:101950007AA64CE2F7D0DC77E9CF5D78EF5EBAC2C9
-:10196000E8FEE84B0ACC06395E5FC4D7A1B3321655
-:101970001B85FCE5D228AFB6337A9B0DED7AC917EB
-:10198000A347A9F4DD6A9197BE7A7229F199A4E37D
-:10199000B905C157916E36025F3C49764E2C309D99
-:1019A000F0E32AC7FCE3C795581DB73F2C2ED42F70
-:1019B000A5269381DF8A0B38DDC812EC52B277EE90
-:1019C00010B42CF57D5BC4C630BFFFB7E766A5A396
-:1019D0005DDA9627ED3CBF0DF1B55D09A417E1383E
-:1019E000FFA5D2BEEFC5D74E34E0B86D302FE4DB93
-:1019F0007B7EEA588FF6499BCB4F7C2AC7D7DC26E3
-:101A0000B11EBC9FFD16FF2BE86F8CBBF97D4447D0
-:101A1000A65C6343FA87F74CD8CF7BADF80B1AD896
-:101A20004F0DF90716BA66CFC0EF16B1E02AB46BB6
-:101A30001775A8867B17EE11F262E1B914164DD81E
-:101A40001F2C9CFC2D3A37B6F05C1A8B82BD758F2B
-:101A500038177D8F3857C40A383D3B44E915E5DF18
-:101A6000CCF7BE24BD95F9CBBDF339DFB302E8B79F
-:101A700049E9B114C1101BA7FC9ECEEBBCD7EA62AA
-:101A8000D192047807CD73048B268CD3FFDE391BEB
-:101A9000CD67607D39FD0ECCD7417878AFD54B78D6
-:101AA0001CBEFF91063C0EF43FCA80C7C1FD97D013
-:101AB000F8EFB5967E49FF1386E95F37C03FD0EF58
-:101AC000681AB7F7C8FC1FA702DF1D89DEBDEDF954
-:101AD0004AFC1D332BFD7E01EBEAACA673848F33E9
-:101AE0003A677AE7E1DFBD83F99A77EEB2F8708C56
-:101AF0003E737CAE6F083D339AB9C2789F972CC76E
-:101B00001714D37C929FDBB4880BF3326DA59A0B2C
-:101B10007F1FD1C66291BB71DF5269233927E3422F
-:101B2000B2DF3FE5A9F23C3BC907796FCB12919731
-:101B300057EC085E81EBBED4D4DEFC13F8F683D2FA
-:101B4000363A37CC989BF633326EA3E12FBF15A3FC
-:101B50005F30C0F0FCCD137A70067EF74310271873
-:101B6000C7512FD81DC4BCB50D62DFB8C11EF3FA32
-:101B700012E4E60D05DA57B317DA93E876D22FF7B9
-:101B80004639DDDE50807E2235F6C4FC22CCB7ED2E
-:101B900011F776E9168A77551EA3FBFEE6CB7DFF8B
-:101BA0009AE4BC8E7C37DAD132CE94867977686B32
-:101BB0006CE4F7BED5A7F27AFD7F8CA07310B0FF5E
-:101BC000492D43F9B25FE5FE2011DF3A2BE6D067DD
-:101BD000DB5840F9F7221FE46CF74B74AFE4D935BA
-:101BE0006368FDEB5FF83EDD0BB73F97EBB1BE439B
-:101BF0004ED263F5565F15DE5BB83F97DBAB9D5A5F
-:101C000034AD22C17E5D9D574DF2F9E335634C89B9
-:101C1000F18FEF0A79B051FA37B578159E67F9B8A8
-:101C200032FA33D2A307ECF43B51A683BFABA2FB3D
-:101C30002D375AE97701AA0F8EDB5C87FBC3348D01
-:101C4000F2914D07ED04CF9975FC7E2DFC16E55DF4
-:101C5000D3C191F4FB56F5A971CA276C4AF195607E
-:101C6000DCAFFEE054BAD7FFE486710528FF4E646E
-:101C7000EA0574AFF1063CF409F54363F9F3B517CF
-:101C8000D37955E7C6D4E0507E10A98F92EFEFDAF2
-:101C90009F5BDEDB85F81967F3A1FC7D4FF1F1B89E
-:101CA000EF2BF1D93AC515F9F9D27AD769FA7DBC8B
-:101CB000FA8E776F62F4DC43742BF773C9E3D50BAC
-:101CC0007DB5DF129F8BBF4B56BF52E05DFC4E626D
-:101CD000BDA99C7EAF4FE27D63D23DB74F08FD2486
-:101CE000CB93AF69745F20D81105E81F3A79D84AC1
-:101CF000747672E3043AAF2EC7AB079CB8802F4FBF
-:101D000064E813715D9F16F2AA7E25DFA7CAE7304B
-:101D10007E0C7FE7307E48A5BCAE3E573C0DE3927B
-:101D2000F23D59EF9F4FB74ABF97B53FF7455A6FFE
-:101D3000A02786F4647AC1497A3AF4827517AEE72F
-:101D4000C7952C8CFECFF05BFCF7C78E1CB292FDC2
-:101D5000DC779CEF6F07DD9FE68817E0FDA1A117F8
-:101D600046921CEBCB8FEFE0F6B69DDFABF846F06A
-:101D70006211FFCD11F711E6A09DF7F9217B14ED5B
-:101D80003C28299E1066BBBDF4FC702A43FF0F94CB
-:101D900014CF63CA012FFDEE0C6B17DFC7E8FB3BC6
-:101DA0000B8263512EDF590CFD3BF0FB53F4DEE751
-:101DB000A38217520C8AB15C315E2EF59B1F2CA4B6
-:101DC000E7CA675EFE7B2AEDA23D46ED216BF0621D
-:101DD0009AC7AF9C6CE710F3FCAAF7EE1D2D1841D3
-:101DE000EB28E1063C93DD988C97B30526F17B3B0D
-:101DF0001C1FC974D9BF9E5F021FFA5FE8BCF621A1
-:101E0000BE8EEBC659B81C593B81EC63D69662C8AE
-:101E10009F5B7188DFC3D0BBC149EBDC67F63F84B1
-:101E2000FA28FE8699F17BEDC022403FC5E4A1F976
-:101E3000E523914FBF642DCFB3FBE8D1F70BE63913
-:101E4000F05CF2FB8673C9D25F089DA4A13FC6E196
-:101E5000D3D3E697717B5D25F8F8EF7A6D34EBF418
-:101E6000BB6BE10DE3C81F71D2A21FA4DF875B77B4
-:101E70008109E94A2D17F277139F9FBC2F4BDE7B18
-:101E8000958C9F8AC262927F4D2C7833DEA17E8230
-:101E9000E959C26146F7FF917BDF8469889A9FE226
-:101EA000B6AC85F4C2E07BF62C5FF2BB6CFFBBF5F1
-:101EB0002A5C2BF4EF9587D350AF7EE0E2FB463AE5
-:101EC0007D8F7A5DE5F36CC30F30AF8305A6144EAA
-:101ED000A27692871F28BC5DCAB941F3477AC17EBA
-:101EE000F03DE8EB9A42EE7F63AE0C71C82B6CC1FB
-:101EF0003C4DA99F428A66C273F3A7DC7A1AD2E3EB
-:101F0000A9B5C5192B300FC6AD6725DAD5A1A38CAD
-:101F1000CE8BEB78DFF8C5F8FB32FE89E8F7DB9F64
-:101F200061F43B24C3F3E4B49EB989ED730AB99E0E
-:101F30009B5F28F699854CE45726E38DAFFB62B191
-:101F4000EE6A79F072DA8726BDB7784BBAA087A41B
-:101F5000E7EDCF7F97F2A01E36DE1349B15F18EF91
-:101F600083572C61E5422C5328AFBD611397730D45
-:101F7000AFCE2CB98BD7E95E85693BEFA1DFE35982
-:101F8000B0EBCA12C6E516AD83A4C70505FE12B4B0
-:101F9000E3E25B5517F245C31695E051CD3ED756A7
-:101FA000787E7A8B99ECBB0601CFE9BC601AAD9BB9
-:101FB000C6340BE0FDB4164C23FB75ABF8DDA1A4D1
-:101FC00079C07B6F6A1543E0C7C6D799F0533C04CC
-:101FD0001DBC61A2755A80BF0B8970EC54C8BF79D3
-:101FE0003A3F7833D64FC1FE1FCFE9AB9B96D07DE9
-:101FF00036C9F83E6D0B127D2E16F391F84C1E4734
-:10200000E2B30FF189F6D22B5348EF851E5491624B
-:10201000D98BDD9FD2BE7CDAA12BDF998ACF3781A5
-:10202000DDA2A39E1DF5B36FA39E5BA3528C7AFE27
-:10203000A1E22C96A4AF71FF39FFF53969A6043DE2
-:10204000A93EC8F1A43AE7A42DA4F7CF7E1DE9EB81
-:1020500084EECBAA4878EFF1C2FEB88361BDEA37BF
-:10206000FD210DC769586FA679C975E9C379A07CB0
-:102070006B4F8D20FDF7E5C5A95FB94EFDF48DEBE3
-:1020800020E909DEFBAF429718274CF2E85451B023
-:10209000CA37049D2C7A00C6C5FEB638E9FED2F3D5
-:1020A0001D57E2A37FBD055F531DD7714711F9D1BD
-:1020B0004D6F6874C8E044FB5505C8C7F5A02FD024
-:1020C0006F51AFC4DFA17B640F59E91EE6FA4DB72B
-:1020D000DC8CE3D51FB79AB0FDD4E1AB26125C4986
-:1020E000EB0A782A188ADEFB8AE205BE04FC813DF1
-:1020F00041FC2DE7930037C101FB29BA8FA8AF0837
-:10210000D633410EBC59C8ED2E78DF6521FAE6F7CB
-:1021100061F5CFD795345F57D27CDF6444DFCC17AD
-:10212000A4F92C78DB6AC2E70BEEBFB604F73DA733
-:10213000D64DA7799DCAF04F44FE3A5500FD0F21B8
-:102140002F17DC0FF32CFB0BF36CB7D37A0D3BCFBF
-:102150008CF80EF617E6F989A04339CFF7343D0D18
-:10216000F3F943CFAA0CFD2EA1FCC0C6A9BC4EBFFB
-:10217000131732737A086D4AA57CDFDE6EFEFB040E
-:10218000520EC078E7490F26A28753D5FAE6C9D088
-:10219000DFFF073F3717B700800000001F8B0800E4
-:1021A0000000000000FFCD7D0B7854D5B5FF3E73D5
-:1021B00066269364924C12088140983C09908449A9
-:1021C00002888A767804D1020D4F798993071042EC
-:1021D0005EA0B5696BCD4002A2450D352A5AD401E7
-:1021E00081A2A20D0A0A15BC032A6245C5578BB607
-:1021F000E526405179C6A05EAEB5D7FFFAAD7D4E5B
-:1022000072CE9054DBDEFB7DFF7C1FDF669FFD5AA4
-:102210007BEDB5D75EAFBDE7C23DAACBEF16E2E4DA
-:10222000DD056FFFBC17A5F7AA2E81FC58DFCD0294
-:10223000F98FC32CFE144A938BA670FE659B6BA589
-:1022400022C489A6BFFD41A1FC857D36B7A0F20B53
-:102250002945F7CE467E8FEA5A41ED2F0C689F251F
-:102260008673B9D844E5EA5D239A502E1E1EE6CA4D
-:10227000A0F2F20D61426409FEFB56687F23E93B40
-:10228000520BA56B556F7834A54D2FFD44C9A56F32
-:1022900056378F57F3AB24F7DD347EB95558EDF937
-:1022A000A8DC9E392D4788F37B6D1303D9323F2379
-:1022B00087CB3FB052798D5DF85AF87BAD7D6A0EC1
-:1022C0008FE2B6D2388BA90F914AE9FA18EF60EA8B
-:1022D0007F318D9342E37D8BBF1F5C0EDF0ECBE71A
-:1022E0000B8AA89F7B6D62F673D95DF5F434DB4DE4
-:1022F0001DF6466D7B573B558825C63CE1A122243F
-:10230000BF14794757BE32A4BC2AA47C47BFCFA7CD
-:1023100014392F1F7F03C61FD185C7120D8F3B2C89
-:10232000F41DEB728F12D844FF2DB1BAEDCB09FE2C
-:10233000E7C6889BD14FA95538AECD47BD0E9E5FED
-:1023400089553486E5E3BB87EBE9F3A6FE1AC3E2C1
-:10235000281FD1CEE353BD8976439EDA9BE09AAB2A
-:10236000C1A3A74BB785BB4EEAF3A07F552DB1A6FD
-:102370007CCDEEBEAE93067C2FC57FFAD2BF49342A
-:10238000FB91C08BFCABDADD7A3092E8A74DF1CD42
-:102390007553BF170E7E1D9DEDE6751F5944EB9BCF
-:1023A000AFA63E7F98E6DBBE47F56C42BF6FD8FD17
-:1023B0004A0CFDE79B8B0F6EA7EFD52FA789BBDDDE
-:1023C0005DF30FC5E385DD17A353E9FBF943F60879
-:1023D000318CE6B9377EAC9DE862475C7BB778AF5D
-:1023E000D5D65DEFEFBCB5357AAAA1DE79D11A3D1D
-:1023F000CD402F25BB2FD68B5CC69F5FCDEFC2EFA4
-:10240000897DBDC7AAF4BDF4F7FDC65A28BD5FC3D8
-:10241000DBBD36F7136B096EFF9E30CF1682FBFCD7
-:102420001BB32D687FFE8D722DBDCDCBE95F4F2490
-:1024300063FC688BA4777DBC356E0BF7536A697BB0
-:10244000EC1ADA8FA5BFEB93D290D2555E6AC9CF52
-:10245000C43A6FB7B52F00DCE715B14689EBEAE760
-:102460007EB79BDB9FDFF3C963E00F27EE1D904F24
-:10247000644DF941B93E2A3FFF5141A68BFA3D7F99
-:102480004F5F0FF8C2769BFB36A6B7BBA23CD8F7CE
-:102490007A7F18A716FDEFB962A40FE947125ECA4A
-:1024A000E7FAE4B87E25BFABDF688BFBBED1E0174F
-:1024B000BFB779B650B2FCEF697D62313FECE76E91
-:1024C000D6A1744D98709BF8C94A86BB4478EC221B
-:1024D0004D960B03BD958922FEBEB0C9FC7D11F15E
-:1024E000097C5FBCDEFCBD5C34AD6EA5F92D09989E
-:1024F000BF0BDA3FFE04EC6BFDAFC55E14057AFF3F
-:1025000036CC544FF835FE401F095F25B41FC1C7B4
-:102510009E5102819558DFBB549E67E8BCDE75A7CB
-:1025200070BB8722FF6741AB615D8F5B843591F0A3
-:102530007ADC2E1C89F9E8470885FAF5EF0B0B6C5D
-:10254000A126770FFE2AB9047CAF31C22208BE5BF8
-:102550005DE07C42ACD8F74932FA295D53E86D352D
-:10256000C077C1E67DE8E7D4BEFD5DE2D754EFF861
-:10257000D840D35882EBF8DDAAA7A11BB84EAFB163
-:10258000884001E1E32E2102F1947FF293E4625A44
-:1025900097CFB67C925C62A47F45CC36D2A39E12C4
-:1025A00024BC3EEF61EFD2FC8ED35C309FD07A5DCD
-:1025B000EB6B8657C767B82A6ABBA387CF40F7542F
-:1025C0009EF5775578B1EFF7D902A0CFC88D5F3C63
-:1025D000380FF4B9D7E64AA1B16BF6A95E95E62D9E
-:1025E000F6A8810C9C637B4F4457E09CD953E05282
-:1025F0000DF3AED9A316E17C39BFFB62426936F711
-:1026000033C5ED44FB073CA0DF9EE0F89B5BFDF784
-:10261000F89FD7CCFFCE657F907003F8C0C6539962
-:10262000E0EFC407FFE6A6799ECFFCC68EBC10ADD6
-:1026300023417F045FB49BE0BC10F82A5A105C8EE3
-:10264000BDAA37D0CD3A44A5D8194FFF327C130923
-:10265000BE842EF8089EA894115D7056BBDBED3841
-:10266000672F38A273C14F694293F212B4F3C90DB8
-:10267000FE5A3A49107F1DBF67E1CA70C80B4D8AE8
-:10268000278CBE97ED55F9DC2ADB1B19C016183FC5
-:10269000C8C9F9D247D54018E527A8A3FF309BEA5F
-:1026A0002FBE47F5D08E14FB37DEF6071BD6758399
-:1026B0004DA01C88035C4B34B896ECFDE1670A8D95
-:1026C000B378DF2D0730CEE207140F17A8F3EDE83B
-:1026D00077C9438A88574067B6E3463A5BD864CEE9
-:1026E0002F12AD0B5415FCC1FC9DF09E5C41FD9674
-:1026F000EF0E73DD8DF102A1E542BC4AF0D468FF14
-:10270000CFCA583BF700D5CFDA68673C9C0F17E279
-:1027100008F6ABB53541200DB626631DCFEFF96B3A
-:1027200032D6B1E677FF9529BA59BFCEFDB437AAA4
-:10273000D7A94821AE4E51C4B7A9A0FB8B538ABA82
-:10274000A96F1B20F7C5369BBF9F87CA0F6CFC8AF9
-:10275000F9C1853DBE81AE6EE8B76BBFFAC32D8966
-:102760004883E102E9F016D70DD827240F62BE3561
-:102770009B564FDB44F9F0976C38B9444D8693F77C
-:102780000BF6C74243BFFA3ED906BE807484E40FFD
-:10279000B601F21C3DAA9D7BDBF6774CC9E8069E8C
-:1027A000A36E1BD7B30D105CEF5977D15CD05B845F
-:1027B000C51F0DBE2DBC5E772FC2B3A2D157435D9E
-:1027C000AD82EF89A289D3FEA285D34785F0395126
-:1027D0005F785CC0B3100362813FDEF38CCFBECC68
-:1027E000377FACAD217835E8C41F2B025BE8FFEAE8
-:1027F0004687506320EDB546A35154CEB4FB065234
-:10280000B9ED03D5A240DE1DA0AFA7C785FDF7A592
-:1028100073468C71FDF61F2E9988FEAA76A9228C2C
-:10282000FA3BB7D326824ED4A7FD027C1CFEC29E83
-:1028300002BEB4571190976B288FEF35A3ADDE80A1
-:10284000012F77A4D8180FD52999F29CB67A0F4D8D
-:10285000A27ECFBB4AEC90EB6D87CB26E2BCB125C4
-:1028600096D801D7FEC3631D2958B7582BEF9BD5C7
-:102870007BF5718FB8D07F54EC070C6F63B645447D
-:1028800053BBC6A3610146A643F2A1300DAF8DC173
-:10289000F10E7737EBE317E393C4282ADFA94E0440
-:1028A0009CE75C252EACA32D96E8EE0A6A6FF34EEA
-:1028B000BC9AFA0D8B8D8B077C6B52D2783DBF8A08
-:1028C000AD6538BF22F1C2CFFBB7B608F9C6FE65C9
-:1028D0002AE3BEE921DECF350E397ED43E95CF51B5
-:1028E00071A543E3DBEFBB4A699C05C9BE47410FB5
-:1028F0009DFC6DC4AB02FC39CB6261F9ACF135E7EC
-:102900005AF021BDFC6C8AA4377D3D56F5B2BAC0A1
-:102910003F1ED5E87395ABC8916F98A7ADB745C377
-:1029200057910378DA612F3A84F3A59DBEE3DC3C2E
-:102930009038CD013D85EA59D0CFA97ADA3176F4C5
-:102940003BC301FC2EEA553201ED168BDAD5D86F68
-:102950008BD7AB2268E0AB8D3639EEA24B11221833
-:10296000DF35EE225A3F6E7F295A04E9DC6D0C9761
-:10297000F51AA3E4FE792345EE9F0FB5F9B469F982
-:102980007F99AF7BCC7CFD5CEC1FB69648FEFE4683
-:102990000AF55BA5B44E48A1F9AD4EECB003BFA754
-:1029A000EA5D22986980F7B279C68BA061DCCE7AA5
-:1029B000971C3C9FAEF57033FC5DF375321E4ED50F
-:1029C00027321E7BEE3FC984C7AEFE534D78BCBC98
-:1029D000FF4C1EFF547DD677F43FB487FEDD26F80A
-:1029E000BBFA4DE771C56EDF40F0973B5DC40F98B1
-:1029F0006E885F50B95DF13D7E35E4DB8FC204E443
-:102A0000BEAFC27D835C06FEF00DCE65D6E782497F
-:102A1000E0B77ED1CC69CDEE8B13D0DE4D7C01FBCF
-:102A2000492FAF11ED0C27F885E88335B4BAB97C8E
-:102A3000B76F10F4221D8E4E79E675A7DF42FB209A
-:102A40006CDFDFA3B18F2F58DBA778286DD9AB4699
-:102A50001AF7757CAAA4A7B103BEC86DA5EFD56807
-:102A6000477CEFB697970E027EAAC3DA7301F7810F
-:102A700097FF968B73E4AB7D4B07E2FB36AACFF250
-:102A800087BDBDDA63E82F5DB8FC96515DA933556B
-:102A9000EEFFD0EFDBF635F4031CDB89BD09920BAA
-:102AA000ABEB2A0A4EC6830D79EF07FF12C4B75865
-:102AB0001FDA3D5D1D03F9EE439279283F7C8F9428
-:102AC0001B860F10014B0AE4BE0F67834F548FB073
-:102AD000BBA00A47E41D61793B6284C3A550FDBFDA
-:102AE000F797E3DB212FA4A17D613CE8F9CA64F1EB
-:102AF000EFC96D1B42F64FF0BDEAED345E95DA3A50
-:102B0000659CC2FB283F157CFBAD2FDED6F4D704B5
-:102B1000ACCF019C6B04CFFB5A3F65A9BE2B50CFB5
-:102B2000E768BDE70AAA377356DF64E847C59A7EAF
-:102B300026261152AE647E94033BC8E5E7B6D483E3
-:102B40005E527C3EE0C1DFD7E1C1F935344938FA45
-:102B5000125E456220751A8D3B21D5A2DB0F14C091
-:102B60003D449BE333FD5A96C7F2391988031DFD96
-:102B7000B3E34E4BF54E06FC7AFD0F67CDCBF175F6
-:102B8000736EE8F2BCDDDEB20C70B65739597FFCCB
-:102B90000045D4EE89596141351A7A8A730DF4F9EA
-:102BA000A3910B0EF6267C8C8FF2CD43FFB36FBC46
-:102BB0007E35F2CA8178F772D07371EB48D6EFC2D6
-:102BC0007D37A3BCD2E11B9840533C37C037280661
-:102BD000877C51BC5C27519453D42DFC129E6245D6
-:102BE0008EDF18E52B473FC596238F5D816FD62377
-:102BF0006C6F108DBDB99F737651DE9DFCAFE3E124
-:102C000098368FFD3671ED259ADFFE75319E06826E
-:102C1000B7ECCE1B17D450BAD0529410544D70DF7D
-:102C2000964A5D57FA8B07F62579EE9C4D83BB4E8D
-:102C300083DBEACA34EEE750B81B7479E5170AEB78
-:102C400083FC47F917FDB181BB291F66B9F8C17430
-:102C50009C5B3916B6936C88A0BD457AE43B1A9C00
-:102C60008FD2BE73C4F1F735F89E1821DB273E687A
-:102C700009C07E5034760FAFD313D54E8F4A6315FB
-:102C80000BB71D7250A9F0B2FEFCD7317FDBD74ADB
-:102C9000F36A4EF5DD07BCDD1C6F49FE80E1F00DE7
-:102CA0009D0A796BB49CC73F9037791ED384CBC6FD
-:102CB0004299586B81FC31CD25A7B25091FB63BA84
-:102CC000F0DA30DE4CE1E37AEF9DB77BA14FBC0731
-:102CD0005D88E0BE51F8F9FB1C11E0749E0872FD9E
-:102CE0009B442BE7757C137DDCDC4BD2C7277D54DE
-:102CF000C6FF56C0FD6E64EE803A9AC7D48706655B
-:102D0000B07ED5DC9BF1F35D704FD5E886F6EF6FB2
-:102D1000B18ED8BF33A89F693784ECDFF1BDF5F5DC
-:102D2000CCF847FBE84847A7FEE4EC4B78B84E5B8D
-:102D3000D2EBBC4B597F12C2C5F2D18FB47D5BA8D8
-:102D40003A452F5A9F236ED297089689639625623B
-:102D5000BEAFAF106F15D03ABE3E46150D5CD3CB5B
-:102D6000EDA668FD4DE93FE133D85B0F8B60AFE125
-:102D7000D4AEF092EFD518827B8ABABD3196CA27BD
-:102D8000F627BDC6C0EFAEEFB5C30AFDEE8674F3FD
-:102D9000F749D966FD67B2685231FE94E1E67AFBE5
-:102DA0008127A2B3F753A5FE22868821DFF27A0B92
-:102DB0008B713E1D932EDA2F101C1169BE8FB12E20
-:102DC000CB27FF7501C61556399FEAB755B6EB1DDF
-:102DD00027798B28509CACA7932253CA25C87F4AD9
-:102DE000F203D2D3F56E4ECFD2798FF2F3F51ECE29
-:102DF00017A4159D40BF256B3EB7627DEE0C97F87A
-:102E00002E6F699A00B02A76B71C445A162C9A8005
-:102E10006376D1A1DA8348EFECD4DB6A59BED3E103
-:102E2000BE45A3D35BA2A6FD3087D6E1963DAA8717
-:102E3000F303A64D9FDC0B791BE77BA2A3AA4B44AF
-:102E400033245754ABDE2F0197776FDBC1789ADFBD
-:102E500027F5A318EECFEABD0CF799FA899C4E4AE4
-:102E60002BFA1BE8CC2B3E67796CF2F6366B12D549
-:102E70002FF42A5EECDB6BBD2210A0FDB7DE26CF5F
-:102E800081F5740E601F8FC999F6E8AD027CDA6790
-:102E90004BA37166DEB0A410E34C19556C45BD1B05
-:102EA000BF211920A58B4EBF8BEEF5F95769EB7644
-:102EB000EE6585F1D8B1332D0672C1F25D697D9062
-:102EC00012BFD4F5DD48E0ADE39285E1EC381AC1DC
-:102ED000FA86DE6EF9AE48E63BCB07D803C260B790
-:102EE0003C43EB2C0CF2E699677EE2369E2B67E2C0
-:102EF0005ABEFA18FCED2F92BF916473EA11F0BF2D
-:102F0000FEFD3CA093F39A9C4D7A4624CEBF6ACD39
-:102F1000AE08FE84FC990869CF1DF96CD258EC2FDD
-:102F20008C471C4EE8FC2BF3D987527FEEEE1A6FCC
-:102F30005BCBC28F1FA1FCB980C56FA3F3E99C686E
-:102F400039FF3BF0DFCD4EB6EBDDA9103C387FB743
-:102F5000F4E37C96628DA8C3F92B02BCBFB314B70F
-:102F6000B58EF855E5730FF703FDBD44381845E5F8
-:102F70002FAD8B647EF692CD73AC0EFD3D2AFBFB2C
-:102F8000CDBD3F3DBE1BE93D55F93FC5F2A4C5315E
-:102F9000FECB7EB56408DAD3F92EFA527F4FBFA874
-:102FA00004C3693FE734EF5FD997E01BB6A1CDD2E8
-:102FB0008FD2BCCD4A03D2A1036E3804BBF30D6996
-:102FC0006E6E5FB03D454DC236EC17F8F8077CEEEB
-:102FD0009BE581ECE6CFC7F6135D72C110A5E5F461
-:102FE0004682352CF968BE8FF1D7C4F3D9B577FA8C
-:102FF000FBF304E6411207E02EB67BF81C0AF83713
-:10300000623DCFF9B23CACD715F91F069D9DF32563
-:1030100078702EBD407AFC55A87FCCCAF37C71F342
-:10302000BBD1B0EBC4907E1C0E7F485EFB04D4AFD6
-:103030001AE0167E6A3FE0B1EB26023FD53B776D82
-:10304000E47E2A1D1EE8B9E5BB2E1E4C829C78BD8D
-:10305000F064800E77CAFC2FC77B3D2A4DB57CE318
-:1030600097327FA488F345A4755A51BF54CA470FBD
-:1030700069E79F68CD65FEC8A4EDEE5AAF5F523197
-:10308000CAD7A7F8FBC2AEAD9F9B74DE55A561AB56
-:10309000D865FB2363E725335EBEE77967D7CE2D7E
-:1030A000BDBF87ECC21F4EFDC06C033BFA06BB3CA4
-:1030B000A7B7107F01BDE8E7348DFB0BEC5F6AEF2B
-:1030C000053F4D52959C9D848FA487C258CEF8BE73
-:1030D000E3CF8E59CDE7B62E67D544483EC8670585
-:1030E000B55F18E5BB0BF35BA89DF3C2EACE861C67
-:1030F0003223CA7B37BE573ADA9331073A3FEF455E
-:10310000BE5A25B92BCD207739E3BED7F95917E53B
-:103110006DC67CBE6FFDB19104670C525DCF22ADD0
-:10312000A35B7E9CBABD05FCF88130C98FA30A98C9
-:103130001FE9F30BEDFF15DAF73EE233AFD179E289
-:1031400023DC8F738EB1F27ABE6AA93C48E770A186
-:103150001C01846C8D1DCE796F14E16FBC5315BEBC
-:103160006EF4453DA5F57A1EF899D02BD254AFB038
-:1031700057AC1DFBF7FBCE5BD5D6478DD0F9A9BB6D
-:10318000977076376F39CF5BC247F4015EC62ADF8E
-:103190006FBE0E5BD141ACC338671E9F8BE39C535F
-:1031A0008FF904C37F18DF43E7193A1FE1F87EF275
-:1031B000D28F15E1B760FF7D6E67FBDA5E5BEBD304
-:1031C000BF257CEE5D92ED819DE805F05EF0CF6855
-:1031D0003BCBB37BA3841F7C65EFD48400EC452FED
-:1031E000414F04DFE82D6479B8ACBF770E95537F6B
-:1031F000FDC2685FC05E342F42EB9F0646FB157D23
-:10320000B87D8352FB660EDAAF8864BE733420F952
-:1032100078736C709E4ADF9B3FCF14A8775404D616
-:10322000A4A2DEEDD25F43E54935D46FF3922112BB
-:10323000CEFF51F9DC68CEF3F68D73321F67FB4C7D
-:10324000F3546F5FF8AF7A69EBD5BC5196F7833DC5
-:1032500014E52994A7F4639BAC3F57ABF7914697CD
-:10326000B4CF990FF8A6445A41E7FDD24BC2D29988
-:103270002979FBC2EFF3485906DB28E7565C9FC269
-:10328000F4A3D9CB666B7C5BEF0F0D1C23212FCBF6
-:10329000BF390BB784839E679687B741EE3B5ABE12
-:1032A000320A7AFB4C9F1A0C835C39A3D0DB29AF1E
-:1032B000A5625CAF1CB74CD7FF82A5C0EBCBED0E6F
-:1032C0007137CBF7C102A33EA5AF6F55CB9878A35A
-:1032D000DE5C6127FE42F02CD1F66D9AD3D73B7DA0
-:1032E00004F4E9EBE38DFAF4A7650FE4F2FED2C62D
-:1032F0003B5BEF8D3F990EB96D22A7FA789D7A0F4F
-:10330000D64DE757A097DB25BD086BFB478B29DF20
-:10331000307B8807F6EA89D31C4C6F1D2DE12C1FEA
-:1033200037CC8EF0C26ED7B02B8CED06376BFB839B
-:10333000F428A61BFFBE28EEA7D22EF395CF65304A
-:10334000DDBC600F3CB915E52F87B37FB6325A8ECE
-:103350005BF9BB248D2EBD29AB7AB15F8EE9A53216
-:10336000C21DC3E5BF8F677A7A36DC57007C127DB9
-:10337000B25DBCD21ECC8C25FC1FD3E80F7A23FB98
-:10338000F56AA3986E8596F7FD3C9EF538927F7995
-:103390003CDF7D4339EFB37BFB2EC43E5A1EC9F0A0
-:1033A0001C73C9F26395B1BC0FE6DFB7F430FCC5FE
-:1033B000C78AECBC5F8EED5559DEFA739D1A849F67
-:1033C0005BA7CF9A25C7DF86F9A8BAE1A3E4DDD4CD
-:1033D000CFFC955593D06E7EC5ED5370DEF69AF610
-:1033E00029FB6943F7F3FC4AB37FD497EE9D8CF930
-:1033F000D56407761CA47E1E9C736A11D6D39FEEFB
-:103400009B86F53E6F6F7DE14F0477EB8A3FB25E9E
-:10341000747DB46F26BE5FD8F31BAE5FBDF2BF16DE
-:1034200041CEAFB64A7AD1CFE31A8D7E45866F1E64
-:10343000EA57AE7C9DF581C8EC23927FDEFEFDF855
-:10344000CEE9BD5B5E50A8DDD288BDD59CAA815C6B
-:103450009C6B679460B492067C4A3DEDAC2B188D52
-:1034600075F159A49CB8745B881F184B91A0D97F43
-:10347000A8DDD21619BF42F2821DF4195A7F297DA8
-:10348000E77ADFF37B856891DF6377DF7BB55CF7F5
-:10349000607038FCAE199BB0EEE776FD26D3E87776
-:1034A0000D4D2F8757CEFFACB65FCEEAFB65B6BD9C
-:1034B000D35E00B9EBFC337D4C7476FEC9C19C3FF2
-:1034C000ADB42B114A977F57785A46727C8DB765F9
-:1034D00024E4E707B5EF4BE35B4682AFE97C4E3867
-:1034E0005A7259FFCF6AC985BEABF34751D492C90E
-:1034F000DF032D9968FF8245DA53F88FE0A8783A08
-:1035000069E3DDD20FE1B70C477EE826E4F5711AD6
-:10351000C2251FE969BE8FA54B3BE6F939F69BBD75
-:10352000547FD07ABBA97C70C09CDF9A2EEDE70354
-:1035300043E26FFAA9EDFBC3708E3C21BAF5D73F89
-:10354000A38DF3D4539D713CAAA6CF0AB74E1F6E2C
-:1035500029DFDB80EF8F3AF17D6B12F1E5A59863EF
-:103560002ACF5F9E674F49FBCD0B79BE249C17E79E
-:10357000811782FF8558CA6743BE9278D5F33A3ED9
-:1035800043E7BFF2A34549B0DF7E94AEDBF93C7D53
-:1035900040973ADE1A6CA4EF64433F2E2F386985BA
-:1035A000DEEC492CB31AECDAEBF31CD8578B37E47A
-:1035B000398C74D6B0ADE010491CE2EC36AB072074
-:1035C000375803F7427E6FD8A6B6F805973BBC5430
-:1035D000FFACF3C0DBA8B768436C3EE46DBDFDE211
-:1035E000F52312CB0C700EDD665E879C16737ED8B9
-:1035F0006E73FE04CE80DEFF7CBBBCA0395F70C85A
-:103600009CFFE4835B67819CCB55FFBD2AF4893F17
-:103610004D3884F3F1D3175E8CC6FA2CFD4BD9419B
-:10362000E849A17122B46E0AF408FF5685E9E3B2B5
-:1036300078911EF8811E0F819D61A4930AE13F6875
-:103640004DB9BCFE19D132CB4B745559B7BCE064AF
-:103650004157BF57B6ACB343CE0B1DB7A7FD2F9C48
-:103660005E37EC6AC5A364D9557563C509F82DD6D4
-:10367000BE3B01F457FC4B85E58AE2E707BD0ABE75
-:10368000DFB663CE0D9CCE9AC8F8D0ED7D8BF72ABD
-:10369000C128CABB4649BA5DB85E617DBDA4D11CD4
-:1036A0004757B63624DEA6D95CBE78F7FEFF869F64
-:1036B000BEDCF118C7335C1E271878057A5BC5A7F6
-:1036C00082ED3D159BBF0D3397CB792DD4E7E1BF3C
-:1036D00096E3E1AE92553ACFB793C8D0F9F04B5785
-:1036E000516A06E1FDAAE68DAA949BBDC5EC9775CB
-:1036F000DA39CEB0CA21829104CFA128BBD745DFE9
-:103700002FAE8F6279615118C99FF99C8A708E43E0
-:10371000F4C4A0DDA977549683AAE2251EAA1E57F9
-:1037200002B0C556C1488AFC1332BF04DE2655D20A
-:103730008FD7003FD6CD98174D526FABB406F70325
-:103740002F9DE7C03673BD4A9AE7D138C859E6EFD6
-:10375000D5A29DEBD7ECFE36CCF8DD60DF657D525F
-:10376000D76B55C83304A77A4704CBB3C49823401A
-:1037700057AB14EFC30E15299DE3A0EF254E962FEE
-:10378000E66E94E747338C839083D70D66B967AEB6
-:10379000E2CD04BEC4BA70D6A7A9DC1FDE8BE564F7
-:1037A0009643484E6639AA7D8E9DE3129BF35A825A
-:1037B00090C79A1F48F1D00A327FE4F3E89E7096D2
-:1037C0007B9AA74AB9A7795D1F6EFF3140EB0B3991
-:1037D0005AE2B9F99E1C1EB79F2ADB893E520F2080
-:1037E000B93A137A02C1E541B92E4767C5FA4AB022
-:1037F000EEFAFC9B63DBA3E0C712E5F1DF4B6ED86A
-:10380000A29D87EDEBC203F0539C548A0E5A0CF62E
-:10381000A95B32E4F93172AC77AB568FFD1965962E
-:10382000A977FF80E0297BD0E26E48E95A07E1F5ED
-:103830006662FE27D785E783EE468E95F6A7637905
-:10384000929F470E171CBF73BBD6EFED1916539A04
-:103850001841F448FD9C2C94F6EDA8E1456C07A4B2
-:1038600035BAB9BB38903519F29C2AB317FDFE9AC8
-:103870006EE0E9A48BF152DE3DB94CD924E1F2723D
-:10388000BCDFC85F85B3FDF0A476DEE8EB4174349D
-:1038900082CF718D9FADD3E8665DCF7463A28BB983
-:1038A00090B7413773E4B9D84957DAFA12DDF07AA4
-:1038B000B7135D48BA11E26BB42F744B793B44DF08
-:1038C000EAD4B77BD0B7880E9EC8E86DA817420728
-:1038D000C21A18F18FFC2C25A362472AB40449565A
-:1038E000E147DC2CCE46C6D75DD6C04A82A7BF557D
-:1038F000AECB00ABA43B3A65FC11F95CDF8BF8D989
-:10390000E2FB170B2FD52F4E126CB74A27F926264C
-:103910008EDB09A47007AAB0E7508AF6C531B2FF62
-:1039200062A26FC4B3517F5E4B9CC6DC46C27F2A45
-:10393000587E40FBE87C6EEFB7C8F65E2BA503D33C
-:10394000E43E6A5F15C6F82BBE734026E864D25881
-:10395000339D24664A39414F1B33DDBADC90087E23
-:1039600050D23898CF9986F0A2AA5DD8A7CF487DCB
-:10397000A378F54D934700BE67E33DD8C2A7A7ECF7
-:1039800060FF4A49E39C1F7F083D655B387FDF98F5
-:10399000E97B0F783FADB817ECA20F25335FB12755
-:1039A000527B5FCBD473BFA3748A7FC7DB9023A6FF
-:1039B000CC50B9FE1421EDB9A2518E33D9FFB935DF
-:1039C00091FA9B3C5AE1F094B67057F232F855B434
-:1039D000F53DA6D17743B898FD9C13700DC84CCD2A
-:1039E000861F8224D46EE4E401995AFD31CA06C8C8
-:1039F0004303C7C9FDA7D7473FE8372D53EEB7CFDD
-:103A0000B47DA7E709AF5CBF6C4D585B5A34525B7D
-:103A10007010A5F3B2C69E039F99942A26AC07DEC8
-:103A20007FAA8A4D0C6F7B31F385A84C37F8828FC3
-:103A30001459A6FB6D8399EEDBC6B4B7DD49F9B620
-:103A40002D39D27EA7E9F30B5D82E582B63192EF84
-:103A5000B56F8964FE73CCD51A1527ED5DACDF9781
-:103A60006A24F1D7BA867BE1372E75DADB707E2CBB
-:103A70007C603AFBFB4B9B49BF475CFD5AB37E4FD2
-:103A80007A78586637FA7AA85E0E9A011D95AD5578
-:103A9000980E073678EC7D99CF292ECCAFCC194CF7
-:103AA00007FF2FF384735CF0657AFB3784F791B0DE
-:103AB0001F0B0EBA1A3AC8D70BE3163715B37E1A86
-:103AC00099ED63FE355025BC101DCFD4E86F12EC84
-:103AD000A0E04BD6D6BED897AF6568DFE35C994EC1
-:103AE000A6EB70BE6FD066736502BEB655E1169C3C
-:103AF000B793564AFAA67DE7C0BD80BBAC2202FC54
-:103B0000E0B8D67EFE0A6BD146CAF777086B541C24
-:103B1000E82B8FE93B90E5FB0CEBF7E92FC428C8B5
-:103B20000DA56BD749B834FA10D623E3E3699C4F4F
-:103B3000B7A4E4C3AEA0D353206B6C76E608035D54
-:103B4000CC50981E683E87609F9D9755928F72FA61
-:103B5000BE1FF432696C301D71D8856A25C7AB76FB
-:103B6000240A0FE2873A443BCB231D248F803FEA8F
-:103B70007C46E72744175E4742D77AEB7C656B3D6E
-:103B8000814678DE56EFE0F4A97A97B0124FD85EFE
-:103B90009FC8F967EBDD9CB6D467F1F7E7EA3D9C77
-:103BA000DF593F8AF32FD47B39BFBB7E22A7BFAB3F
-:103BB0002FE2EF841FE64B3ADFD1F9934E5F3A9F35
-:103BC0000AA5AB058466DC33A0F6CC0F753E887978
-:103BD00058F2BBF893BECEA94A913F11FC50B4CE27
-:103BE00001FF2854CF3EF322E1B9A3DCC9F1A11DA6
-:103BF00042F2C10EA783CF8D64BBD80DFB40C33208
-:103C00006FDB9D8673785EB922AC06BABDA9365CBF
-:103C1000580D747D735DAC293FBFEEFDD7FA50FFA0
-:103C20003F8BF12DC2FA1CBBE3D4A37FA4EF8FDF3F
-:103C3000713A03EB4E706C7908E3DE1EA1C1D12A04
-:103C4000E1BADDCEF2D2C008A94FE1CF6188732D71
-:103C50004E897DFB3704E7316D1D06DA5DB346C141
-:103C60002EB34A75ADA42A1F63BDE8FB9FB5F52AA4
-:103C7000A90B637C96346AFBD418FF4CF83CDE57E2
-:103C8000B05CA77885801FE9F82FEC419211C471D0
-:103C9000C51150681C8594ADF9B017AE79FD28E4C4
-:103CA00074A5EE10CBD53E8793E32884DF76D6D873
-:103CB0009F527790EB89D6FEA638C8C8E15E3BF8E4
-:103CC00005681BEB56927540609F8B2685EFF1943B
-:103CD00069DFCBD628A6F8E27B3355E68B8732AC7A
-:103CE0009C0ECA149A13A589CF299D5E897F703CCA
-:103CF0006359539E7D91812F9768DF4BB32CA67833
-:103D0000C74319322E6A109805A57767A5DA1732CE
-:103D1000DF7373DCBD5EBF242B7F75EA70F483E82C
-:103D2000A0AEF68F645AB9DDA10C9784C741E7595C
-:103D300014C7E9747B2EE872CCA7F8EF950C3FEB23
-:103D40005915CF3EFD2CFC7B157F0AE3F3A9629841
-:103D500066DFC80E8C9CCEF28FD7A98C84FC2DD741
-:103D60007FFCD37F89467C54CD4E6957A5B40D693D
-:103D7000F5EDE56C57ABF6D0FE88039F35FBCD5FC4
-:103D80007DF64FD1ADAC97F893B4F85B8EF7AADE11
-:103D90007982E3C0F4B8AFD07635CA37ACA7EA7100
-:103DA00001BA3FB6709F8DF74DCD1E85F5989A5D8F
-:103DB0001713C0E76AF6AD4AE82E2E27B45F3D5EC2
-:103DC00040B7BFD588B59FC37F4884C3F80FADFF08
-:103DD000766654AF53430562D5AE603B8855701C80
-:103DE000C7722D8EB32390C17EE19EE4ED9AF5C497
-:103DF000F049BFEDB0BA6310AF7C418889DDAD53A7
-:103E0000FC20797E9FA37D04BFF085ED2ACB91171E
-:103E1000B647F17EA8DE7EFF41C4DB556F56D88DD4
-:103E200057258E30DEAA77AAC261E00F35B00BC5E8
-:103E3000F70CE7D2A7A36A415F4B5A14EF16F8AD0F
-:103E40001DEE98DE0678DA35FA5A1AD63292D74540
-:103E500083FF14F89A41CE5CB2F77E8E13A47AE702
-:103E600059AEF96D24C7B3510F6F03CE331B0AD877
-:103E70004FBDA4654735CB05DB235D10694EDBCC18
-:103E8000F729BED1C6FB4693D3CEC04F82F6CFAA48
-:103E90002C0F034EECCBD35A3CABDECE3248B6B33C
-:103EA0006878FB0DF6E788AEFA4B5ADAA2D3A9FE82
-:103EB00027BBDFE7D43948EEE325CE23B938473FA7
-:103EC000D919C9F7ED3ED9F9EB092FD178E75AC6D0
-:103ED000F4520CFB6CE0201BD73FB741C601F32521
-:103EE00011D60F5A783E67B62729AC2703DF849F87
-:103EF000333B9F8FB6F03EF6FF7B71ABB3156BC8BB
-:103F00007D84EBB24780FE5BB5FB11ED9AFDE57F4A
-:103F1000A7FF6AED7B9B52A48D23EF3B083D0EC2A9
-:103F2000A5ED3BD5C9FB6E79949DEF2F2C18E6BE0D
-:103F3000711EF8E89B328E51F4773F04FD6FC13B50
-:103F4000F16C6F596E73F741FE8BC336F6132C2854
-:103F5000F01CF5A17E8C9DED4A22B17504ECAD6D8F
-:103F60002952BEA85C433B9350DC8FE8CD4FF8ACA0
-:103F70000C58848FF29307A5F2BA3E526EF1DAD94B
-:103F8000FF13E4FB92C7ECC28F7B2FFEE7A47E5D9C
-:103F9000992AFD0E8F607F515A1917CC8C87DD4E00
-:103FA000A39BCA69546EA09FCA4DC14CC84F67ED10
-:103FB000D21E8972E84D95F9B25E8346A7E807FDE7
-:103FC000B6A5B8CEB3BCBB2B4A40EFB0BC1825EDAC
-:103FD00021BF09DF146638AF6F1A24E9B841F3072F
-:103FE000FAB748F80017E4F825F6A64CC8B9FAB8AD
-:103FF0004BA29B78BCB3DA784B229AA4FF448BC7C0
-:10400000437D1EDF26D8BFD3FE6418CBCBA7FB1E93
-:104010007901E39F7E7230C711B4A50416EDE6F274
-:10402000708EE3AE782A2C08783F7B328AED589F59
-:10403000D9A41CF6595402CB6187A21E5C80FE3ABB
-:10404000368729E0A39F29C29E88F22DBD590EA86C
-:10405000A8AF633F4905B117C8AF944E84DCF7D9C8
-:1040600096C16C27FAEC0D952F29D0F735F8EE1391
-:104070004D0B7EC6F2BFF43F9E7EEA6F83BBF3AF6B
-:10408000546C36DBC3F4F5D7CBEF1824ED03770C73
-:10409000927AC9CA412EE97F8B6C793095E729F96C
-:1040A00003AD03EB7FB41F13606F3FD6B22741719E
-:1040B00002CFC1CC5F03EFDBA49E757ABB8DFD42BE
-:1040C000152F4679D9FE74E7157CEFB042957278CA
-:1040D0008545DEDBABD0EE99564467B27D8BF0CDE3
-:1040E0007A6DFB16551B478EFBD9D601D29F10D493
-:1040F000F22FE4F03DB84971E2E6692C5F6DC80526
-:104100005E2F6E8EE4F8791AC78BB8878A9FFD5CA4
-:10411000E2336611EB0774AE317FAED4F873D59DF0
-:1041200057C7E05E817847E5FB1217AD9E3EE0BFC2
-:10413000A1F87A4FE3634B5F7894F94125ED17C4FA
-:10414000592DD5FCCB4B9F52589E5CBAFAEA879802
-:10415000EFBE6D13B85F70B6E5FE68E37AECD5F894
-:1041600067577B0FD75F4AF565FB37A3199EAD36BE
-:104170000FE0095DC7EFDDFE29F55F6A5FD142F20E
-:1041800045EEE5F3BF288EDCF627F095EDE16C6790
-:10419000A3F5E77B46676C2D8B30FF33CF8433BFAD
-:1041A00039132BF7FD27749EFAED80E787F7B15D91
-:1041B000EDBDE902E7D0E280B95F1DAEFD1ADFAFC9
-:1041C0008AF7C4C04F5345EB81FE687D7EC4EDDFA6
-:1041D000B171FBD0F93C8E76230CFBF49948A69B79
-:1041E00033FDE4BA9C7976109F676DB192DE09DEEB
-:1041F00064E84B6762658A1B3EA0870A97A48733F1
-:10420000635AD81E7046D9C1699B4DB6ABA8D3FC82
-:10421000DA447F89A01FD026ECA98EB54720C7803D
-:10422000CF8FCCE73488FBCEA17673D029CEBFBE2A
-:1042300059F2DC8478053ECF7E1BF6E3B4F03D7383
-:104240009F264F566EBFDC4F8875AADCAEB03FEBA1
-:104250009276FE02EA5EBADD9FE872A95FF1226EF5
-:104260006B69E3B225A0FBA5B5EBE681EEF5792CF1
-:10427000D5EE5FB7292AC3D3164EFB27FBF2F174A4
-:10428000FCAA598A1E9F275CFAF9457B382CCB2D56
-:10429000E988B24DD45F65A3B296C749D1F55B39C1
-:1042A0003F1D4FB8CD02FB5E9B76DFB9A7F9EB70DF
-:1042B000F6044F5296E44F6D29F29E6FFB5BF2BEFF
-:1042C000F6C56F0A62E2FE813CC891FA7A7F047FEC
-:1042D000166810728FC6E796C2AE4E70666E30FBDF
-:1042E00073B2369BF343B69BF3D93BCDF9DCBDE605
-:1042F000BCE75573DE85717B77E109FA36E203A1ED
-:104300006F2385BEEDCE94FA36F2D0B79142DFC668
-:1043100077E8DBC843DF461EFA36F2D0B79142DFBA
-:10432000C6F7391A9E2A357B29D681E3D4F684EB69
-:10433000F100BC5F2ECC49603E2AAC521FBDB024B8
-:104340009BE5C74E3BD35407DB99F438A7B7A27C53
-:10435000E3B27AC37F7B6475DF146EC7F6E79ADF3A
-:1043600049FB73657EB813F68ED6559FAC86D8137D
-:1043700088F24D44FD0BB6F6ADC06F55DD2BEC6FEA
-:104380006F5DE17EE70772FDD8EEA2C72D15E3DC75
-:1043900003DF267D49C66F7B1C463B6AA85F48AC9D
-:1043A00035E4213F359BF3A17E20F035AF695F35C1
-:1043B000311D3C6E6BEF0BBE7FE24907DFF33AA184
-:1043C000D9EDC46C17CB63BA3CDF298FDDA36CC277
-:1043D000F9BD242B8EDB771CCA30DDD30B4D4B2F60
-:1043E000E5B3BCDA995FAB58304ED98C15FB59AFA9
-:1043F0004E8CE673E9160DB64190FF0D700F0E441A
-:1044000098E868E8B6B810BF653F53FD61BB5343F9
-:10441000FC96434CE5D3D71698EFB5175D6D2A1F70
-:1044200068EF8C877348FF96069F4BD6B9E8CCE7B8
-:10443000F986D64B563C7F84BF56BC25E5D3329ACD
-:1044400087B7407B9F231FFE39EF14E0AFBCC51632
-:104450008BF3BE543B87449DF95C2EB70ABF2BAE4D
-:104460008BEECA5DC21B4BEDBFB43625331DDD712B
-:10447000345925142D19722437087DE58D2746827D
-:10448000AEAAD48DC92E2ABF55096CC545ECD3718F
-:104490003B12AEA4F2FFB4F81EC9A2754AB605EFEE
-:1044A0009D0F3EBA234DE0BD91136B9F8FE6B83C44
-:1044B0008DFE926DAE08D0C1C62695F514D8CDD428
-:1044C000B82E3AD9D8141F01BDA67C8CE297727120
-:1044D000B449DF0BC547A19AFD8E9BE67BF1902A7C
-:1044E000EF406AF35CEE92F545BA6CAFDFB3D7E705
-:1044F0007B52D3472B36BE96790B7D3F3B787F2E80
-:10450000AE8457D6EFE6792FB56CDFDA97D27B1DF4
-:10451000BE5D98D7F2B7C6455F49E37CB95DC687F3
-:10452000FFB5F989C7FCC44FEF6C7AC20EFB418519
-:104530003560871E5CFEE4463BE218AEDBB691BFF9
-:104540002FDA56CCF600FDBEDAA77A7CB3868FF25E
-:10455000B1CA0617CDB3FF60C94FCA23641C4BA173
-:104560003AFA35DC13B8B84DC9C3BC6614EDB0E3F4
-:104570001EFF3B1ADF09DD371D87A717F686BDAB87
-:1045800045F120DFD33E9989CB72440FD32FB9393F
-:104590009D716908EBD51F0AD2BE708E6487E8D77B
-:1045A000875569CF433C12AD73B93DD86B3AE4856A
-:1045B00097E5FB0F55740E8DCA87DE2EC4559416F1
-:1045C0008D564D745E333ED2B40F660BC3BEA2FE51
-:1045D00066897EA6FC8C4969A6FA37CE181AE2676E
-:1045E000CEEF2A67FE7595E95D97AADBFD6E85E340
-:1045F0007BC69ABF537A3BD3D90DA6F655629AE98A
-:104600005D97259BDF653C1395D9A18F956BF7418D
-:1046100066FBDAB4EFADFC9D2662DAAF03D33C7FD4
-:1046200094E7A58DFD08BA1D7D36FE9FD6DD79196C
-:10463000D1198F89F85BD83B7C6679E408EBA942F5
-:10464000AE4395668FAACA92F6A82AFF113BE29B59
-:1046500009FFD62442497593C2F646AAEF488A93C9
-:10466000F9DBF17DA7F95E07FABB84F2436A31F604
-:1046700057687935CD1BE74235EC47B083E9FD6BD0
-:10468000FDEAF4197ACF3EB41FDF6037EFE78A6D99
-:104690003B0EF623BC4C2F8ACD437C4965CB545B43
-:1046A00071F6E574A6F3FD8BE516B67F751C7E8565
-:1046B000E9ACA3DCEA91F1DDFF181FD55E696F0D4F
-:1046C000A5BF45341FF89917ED543C0145D6035E4C
-:1046D000FA812E43F092D40DBE743C75E22DA47C79
-:1046E00031FE331CF1114A007CF232BCE878D4FA76
-:1046F0005FE4132C67123C018627A43F312A74FF24
-:10470000DDC2EF20746C50844BF96E3C4CBB24ED41
-:104710003603D3E4BCDB77291EC8EBB32E59F97BF3
-:1047200027BD14C938F51993CCFBB3937E8AE47E78
-:1047300099792981DBFD6FD3D177D18FEE9F098DD8
-:10474000FFD6EF5D2D1AACDD4B1A21467CFB4FC422
-:10475000AFEB72404FE749E779E3D2F0EF4CEDF66B
-:104760001C5E1E95CAF1DA3ECD8EA8F3639FD64E2D
-:104770001FB798CADD05A0EFFE09B017AF6E4C4B0E
-:1047800036BE17E35B65633B6FF28A784E8BC35D81
-:104790000938478A57C8774D8EDFD52701FE88E351
-:1047A000AB6CBD2651D7C77F3A3C59E4205FC8E9BE
-:1047B000897561B38D76783D6D1A2CED35FA397EA9
-:1047C000CE72387A36F6DFAA5DD108055ABAEAFD0C
-:1047D000912E3ACF57597C8F0F667FEF463ECF859B
-:1047E0006B632EEC70BA3C51B1AAB00FCEFDCAFF7C
-:1047F00079E5319CFBBE15B604C8A39F7DA00A8451
-:10480000CED079C672C4A7E192AE3FDD12C9F710CF
-:104810003F558417FEA625EAFE5C97E95CDD3B0B5D
-:10482000E3FFDE41E38EC0B881AD8918D7E3CFC482
-:10483000B8BE151931DDD957F4B466BD94F3B6EAA4
-:10484000F664CDEE0CF91E79C8F7706241BE471EC2
-:10485000F23D52C8F7F8BE4DF32F0C6C68CF837E43
-:10486000EA1F2BB26AF9BC7566417EBF4589F080AC
-:10487000FFDCA278FA70BCC166F9DEC4F29075D58F
-:10488000D36BDA490633D0ED0F2E3984316E6E8C3E
-:104890008835E5C739FA9AEA17BA524CE5D7250E9A
-:1048A00036955FEFCE33E57F9875A5A9FE64CF18E6
-:1048B00053FE47A3AE37D59FEA9D6ACA4F9F38C7BC
-:1048C000547F6651B1A9FCC6D94B4CE5737CCB4CE7
-:1048D000F979E53F35D5BFA97685A9DC2B5C569CD7
-:1048E000777BA17711DE5F86DE45E92D6F65388D18
-:1048F000EB3A7A9CA5DB77794E697250BFA1DE3620
-:10490000D025EED7800E0768F767BEC0B9D21B7EF0
-:10491000C9A022F5DE237D4137A1F542CB47471ED2
-:10492000B8E8A6352C7A2A7AA695F8C4E82B0E1496
-:10493000A4517EF5538533ADC45F465F7DE0F954E5
-:10494000CA373DB54A960F3B7011E5514FDF20F352
-:10495000D3058B1A8F0CF97A869FE631FA07A96B7B
-:104960003DD26ED26DBC69A73D88F080784DE001E4
-:104970006990E813E901A24FA4AF127D96A50B71CF
-:1049800090E813E921D23FF1FDF7A47F223D4CFAD4
-:1049900027D2B749FF447A84F44FA4EFD5CFE6F489
-:1049A000837A1FB7FB437D39A747EB6BF9FBC7F54C
-:1049B000759CFEB9DECFDF5D43743B4390ED31BAA9
-:1049C000FFAB1A7E47D8ED76DBCE1AFDC28A579E22
-:1049D000A7BABFB2A156B446629FB65A634F39BA5E
-:1049E000FC903DF35BAB386590BF5E0FF7260DE1A1
-:1049F000F1FBBB986F6BDF8F89E903F2699D0A5267
-:104A00007D29289F995FBA2A86F8C70FBEA9B5816C
-:104A10005E3EB4747F7FFB0B8D4EDA877833878CD4
-:104A2000E8F2BBEB7EEFCEF81A835F1EFE6C3D8E84
-:104A300047F7C7F39F213E47F793EBF141D76AEF62
-:104A400023E97E703DFE47EFB7F09260BE77CD1A46
-:104A50002BCB2D515611C4387A9CCF358E963CC441
-:104A60003B5C53E9E438B73EF41DEF23523D2FDEA3
-:104A700099DBFC25D5CFEDF2BBF7D1E641E53C8FC4
-:104A8000C24B3EB6D75EA3C51DA0BD4396F33B7592
-:104A9000881183FC4129DBE11E55A87D7E571C004F
-:104AA000EA47CAFA41F497FE158D17DDB58F06C4A3
-:104AB000B5E4216E6C40B593E3C6368C09F2BDB9FE
-:104AC000E9B1D7DED3AA224E38E6C7D8474FA7FAB6
-:104AD0006602CFEFEE730FF0507E5A5C5A6FA4530C
-:104AE00043DEB5EB667DE6625D757CE978D7D74B32
-:104AF000C7B7219E8AF1FC5DEB17BA6EA1EBA5AF9B
-:104B000053E1A52EFC037F97AF4FD7FAC13EFBFFC1
-:104B1000CBFA0CB7B6F07DCCB04A8707707DD77A58
-:104B2000DDDC2E26E03E78F125F741A44BD27C5FF8
-:104B3000807F968A31135CC0914BCD819D27B4DE76
-:104B4000F2EF59EFE1907A07E20AD67C9D7679BDC3
-:104B5000DD21F51A620BD67E2DED4C37E27C3DE46B
-:104B6000B6B11FEDCD703D1EC3EBCCA3751CA7F1F4
-:104B7000A343A296CF0F12D7FC58DFF1DA528FCBA6
-:104B80005ECC72EE78A7596E9CF04D5123C69DD035
-:104B90002B448ED6FCE13768FD5E279AB8DFD07BC8
-:104BA000F23768F269E83DF9E78668F2658A4801FC
-:104BB0009F1A2F3C122EEDBD83F12ED96F92462FF6
-:104BC000696E558C063D089F15CCF155BC77908BCE
-:104BD00071FD9CBF5E0438FDA108723F938991224C
-:104BE000FF23216CF29D03793FB35AF5FD27E42C96
-:104BF000FD5EE6C270DFABD877AF444E998FF728E1
-:104C0000C6158C4B47BB03E3DD2C9F1C70A4B1BCC5
-:104C1000847D658BEBDA7F6FD0F9926E95F7069104
-:104C2000E2DE603A6D96D7E9FC41FE86AC1502EDF6
-:104C300026B8CD71387AFB1FBAC60A6B41CFFCFD8E
-:104C400087B97BFAC3AEF366ECA0F1B083BF197BE2
-:104C5000C578CCF7CDD83E169986D939CD7931BDF6
-:104C60003B794EA7E7AEF126086B7CCF78D6F11AD8
-:104C70008A4F1DCFFF025E2F7487D72F060B29376F
-:104C8000474A3EA2E3B72AACF31E671F635C44A504
-:104C900043E2E933808C7BB87557F13C3EA917FDA0
-:104CA00081EF4575A3B83CD40E2536C7705E7FC72B
-:104CB000ECCC83EF4627127CD7397CEA50C2CBD9A3
-:104CC000FC60264930E2930D0D7CEFFADCB3AA07B5
-:104CD000F27FA5EA5EEB014F7953653FA0F8E695B8
-:104CE00064F809C5E6EEE3A32B1D12AFBAFEB3329A
-:104CF000AD88F7A7701524CAF7D5E43D725D1EE8AC
-:104D00001F26E38BF5FBCC3DC9072323241FEB1F94
-:104D100026F9AEBE9ED48EF349D4CF48E25349F76C
-:104D200045B03EB0DBE54D1A0A7FCA786192A7759F
-:104D3000BDBFA3977C3FF05A91F9D068CA8F3F64FA
-:104D400013012AEF182F4CF164856F94F2BB16FA09
-:104D5000FD98B044D2AF0CFC20DC1D617A6F343278
-:104D60002BCE948FF2F433D58F19956A2A8FF50ED6
-:104D70003195C74FCC37E57B175D65AADF67F658DD
-:104D800053BEAFEF0653FDA4F269A6BCCE9792E4E2
-:104D90002731A076AEA9FDC0BA1253FD147F85F964
-:104DA000FD54BFF74856029E77947F696B9687BC87
-:104DB000AF6A1196915DEF90FC3A5ADE0799E85C74
-:104DC000C4EF916434FDCC0C8FFA8D8A732629468A
-:104DD000E1F724AE739BF96061A2393FDE95F72AB3
-:104DE000966E9C2B34FE28A8809E926AADA6EFF3A7
-:104DF000866A7C3457E4B29EFE5DEBEF1B625AFF7D
-:104E0000507C5D4E0FCFE705DDD29E6F9C17ECF90D
-:104E100046BCC09E6FCCC39E6FAC0F7BBEB11CF670
-:104E20007C6379C121331D8C3862A6832B8E9AE96D
-:104E300040A7CFD0F5BAB2D54C1FC2A7F8947FB027
-:104E40005E577F6AA69FD0F521098BD76F825311D9
-:104E50008FA4FCFBEBB52E64BD3AD787F00DF9F6B5
-:104E6000DAE050BE275B78481578B7E4516D9ED7DD
-:104E70000DADE527C3B65B7DBFE67DAED155435F83
-:104E800049571D879E0F071F7D34A4FFD7FBF902EA
-:104E9000A83F3BFE62B21DF4D12EDF456B031FEE2F
-:104EA000DD15B7497ABABC77F23395E3188E599A73
-:104EB00014F0EB8218DF36F0CB9BB36B15F8671359
-:104EC00045D18E4588CBF98FB064E4170C94F77701
-:104ED00045762BDF7FD0F9E282241917D83254F3BC
-:104EE000F37A64DCCEF343A5DD24CAE3E238E3E2DF
-:104EF0006C79BF83D499E40539C0C7E1F041C0475C
-:104F0000B385DF696CB5B9396EC4FF862AE0F783D3
-:104F10001C0BF9728026DF357CE47000FE41EB85C6
-:104F2000E99C1D1C7098E25B876E7399F2392D899C
-:104F3000A6FAC376BB4DE579C12C5379C1218F29DF
-:104F40003FE2C82853FD2B8E7A4DF92B5B279AEA56
-:104F50005FFD6991299F24DA1F067E072A528F3E42
-:104F6000333455E2C92D387E6FC19DB1F2DEA7A65C
-:104F70005FEB72BA1EF7ECD3E83954DE1F68F771A5
-:104F80001C75435FE1E17B180E4D9F12663DC0A783
-:104F9000C52D77DEA3F09BE396F578E54E7D41D3F2
-:104FA0000F7439DD10AFEC35C62B2F08EBFE3DE05A
-:104FB000FFD2D63D14FE817639DF869FDAF9DE888E
-:104FC0000E57283C33B538DA2D8EEEEFF5D8B225E2
-:104FD0009D256514FD1DF4FE98CDD3CA6FDD5F36A7
-:104FE0009EA7D54FF4D5F00BBB67A5FBBBC75B30C5
-:104FF0004CCE67BEC572F3D46C8ECF32BD83DF3B1F
-:105000005BEAFD51B94AB7F35B1023E3A7448CDD9B
-:105010000DFAED793C89CF44BB68E4FB475A9CFF0D
-:105020004D6B5BEE194445F3ED4DDA7B60011BE8F7
-:1050300061D25892C3F284D8B66557B393E4A2C73D
-:10504000EAAC6C3FE9BFDD358B24B8CEFB1B0349CE
-:10505000EF017D40B681BEB42147E571AEC19E1B14
-:1050600081FDF64D679C3DFB0584D0CE0BA94F75A5
-:10507000436F4C87FA3CFEAFE3ED43F1A4EBAD4246
-:105080008B334CD7E0D2F1D76977D0F0A7DF7F70B0
-:105090002FB3156D72F23D8A8988DBD2D7AF2547D1
-:1050A000D265AD860FD4033FEAA95EA19A1D03FB2A
-:1050B000728770C7B8BAA1433DFDBFC28B8EFF9EF9
-:1050C000EE57F5C41F42F9C277DDB7EA894EFFD922
-:1050D0007B57063E21E368B47509A45BD83F7D6722
-:1050E00094793F6FCC96768D71DABEA2F3DD996725
-:1050F000E61702F6F18655AAC62FE4395E9C52C423
-:10510000EF118B3A17CB33E51A2FD6CFD7850FC8BF
-:10511000F7E0AEF516255C45F992669BD848A015D8
-:10512000FBBB8FF366BF931B71FE9E44C0CD263739
-:105130001AB7B44909EC4FB9FCBDECC54EF97E5C19
-:10514000E8BBD98B35FD172F2A60DF86FA65EECFD5
-:10515000D6CE6B8FF07C2BE167BDA50B7E8DDE027A
-:10516000F21D31E8C3AAB4F3709C968E3737FC2445
-:10517000F15D79C26F4416CEF3466BB771749DF83A
-:10518000D5FD2A9D7EC2C31CAF1F1A1770D6FF4AD9
-:1051900074777E1ADD7FD3D33EE8F4DF7C875FA887
-:1051A000C369891E053E04FFBFDBE857F9F3488257
-:1051B00090FD2731F08FB46AFD898DB9DDDD4FF4A4
-:1051C000ADD8C5F110AB2CBEFF405CF219EA1FEF61
-:1051D000B0DEE53C9080FBF89334BBD3E5F3D6E436
-:1051E000B0D1F27E40875FE5F5EE9828EF73131F8C
-:1051F00015D877BA1F7FAA08F642AAFB497C6B46EE
-:1052000031FE753F49717014C339B361B10D4F4818
-:10521000B63E7C7B6184BBCB7FD23A40C6E7F4E4E8
-:1052200047997EC9C3FDCDB87415F7732C3B45CAA9
-:105230006B8DF72C039D0DD9266C9867ABADFBDF0A
-:1052400019989223F7D152F8D27B1BE27E5628ACF4
-:10525000072C57841E07C47C5ECF5F6CD2F2853268
-:105260007FCB2A996FD5DEC5DAAAD93B304FA498F7
-:105270000FF4F0ED9A3D04F3408A79E03BF81AF21E
-:10528000E06BC883AF210FBE86147C0DDF4B445109
-:10529000729E2AFD3DE30DFB03FE9EF106B909FE59
-:1052A0001E631EFE1E637DF87B8CE5F0F718CBE1D4
-:1052B000EF31E6E1EF31D687BFC79887BFC7581FE8
-:1052C000FE1E631EFE1E637DF87B8CE5F0F718CB97
-:1052D000E1EF31E6E1EF31D687BFC7587E739D62BB
-:1052E000F207DDACBD3B50BA3E8EE9A339B52829A3
-:1052F00087D6F73F23FFE7C7B654ACF3DE25FC6E35
-:1053000060558447AE73D344B9EE1621D7B97D0EEC
-:10531000AFF3ED76992F94F1C2A1F403BFCAF874EC
-:10532000E957410ABF0A52F85590C2AF32DE2AFD52
-:105330002A48E157C177F85590C2AF82147E15A470
-:10534000F0AB20855F0529FC2A6807BF0A52F85593
-:10535000F01D7E15A4F0ABE0FB318203FE151D2E7F
-:10536000C8F9E9263D94E8D0A487BA4C79C8F9C6B3
-:10537000FA90F38DE590F38DE590F38D79C8F9C639
-:10538000FA90F38DF91BF188716F29EF1BDB41DE79
-:1053900037E6739AFCAFC1863579C3F95791B646A3
-:1053A000298F292E92EB729E9A05FF586BB8921C9A
-:1053B000EB213976C56F678DBF92F889166F972BF1
-:1053C000DA2D586FF67BD3BAF98282E38373FE3B02
-:1053D00091CB757F2BFFD1BAE7ED14AC376CCB9036
-:1053E00070E9ED3DC2A522D5EB77E5BBAF173ABE1C
-:1053F0005E8FF9A5010E5228F310079177BB331F7A
-:10540000F1ED5B2D8A8C0B5D29E37243E9AA49E338
-:105410004B5B2D3B0E4450BBF662C5837B07995610
-:1054200071C8960F3CD5E6439EA8CB89D5E2836B25
-:10543000AF423C900EB76E7F243EC1F7DD46B70BFE
-:105440007B198D73CD17C28EDF5B986497F204DAF7
-:1054500041DF1CEA57BC9B0CF4BD32479E7B3EFFEC
-:10546000B2ABCAE8FBD0EDB557E11EDDA408D9EE1A
-:10547000378F47331EA7342A9BF0FEC9E8EDC28B55
-:10548000FBB1BFD4E01EBADD652FE3715D7CFF4E3A
-:10549000EFB7784332DF172C16ADE313D927A1F00D
-:1054A000FBE63ADE687EAF627EC4E20FC18EFC2F5F
-:1054B000DFC32171F1FBDCC3B966786C21E2DBC488
-:1054C0005EF90EE4E4E1C5AB7A135CBE807C07F2C2
-:1054D0009A2F6A5FE3FC66F90E2493CF48868FCF3C
-:1054E000C3417E85DFFF98E2DF68E9E5C6BDE015D0
-:1054F000B604D4DF2E3C500B060979AF559F57B642
-:1055000038620957402FE2957803FD11E798017A38
-:10551000C9F3D8F87D90A956970DFC4697738A5D1C
-:1055200072EC4275740CDFF70B91132E36F6E6B869
-:105530008D7F3D8EA483EF932FDF15CE72858FF87C
-:1055400007F8E6B93C197759B9ECC39196D4AE384F
-:1055500092D32981AD78DFF374EA8EE8510ACB113A
-:1055600087C05FDB1A9FE77B82C5AB5EE3FB10174A
-:105570001B1F8896F7AAA47FA54CC39B6E6F5AA8E1
-:10558000AD4F99163F74BC5EBECF4BE730BFF7718D
-:10559000B1D1C67246A8BC2884EB0F88732B6FB4B8
-:1055A000F1DDD3C56B8B57278AEE7E77C52BE3CF12
-:1055B000B5719734DA384EA85C7B472BF477589650
-:1055C0006A72E8D26DE6EF277242E44FFDFD44AD0A
-:1055D0004EF15BAFCC6439A8D6C671EEF35748B92B
-:1055E00048EC1001DC6798BF629C05EF58CCDFE502
-:1055F000F528DDD0D13B9A7C34098312DEA75E8A80
-:1056000060BE32ED523FCECFBA94C8E98D97B2E476
-:1056100077AC1DD14B6BA1BC5FFFBE2617CD441CE0
-:105620006501E4B23E4CD71D44D7182257E35743D7
-:10563000BCCA2B30C34FB2F956214E73D246C1F7C4
-:105640009126437EA282D990A70AB02F520AF93E32
-:10565000C64485EFB74C1EBE4CDB07B42F04F311D4
-:105660007EF7C3377E6A00F137B37D3B2C58777DD8
-:105670003FF8FC6DFC0EE664BF62C77B813E4DCFF8
-:10568000D6E93D745F2C88D4EC634E69FFEAB48F91
-:1056900001587E9C27F246C4B32E802DB39FB6B02E
-:1056A00084AAA86C599E9C1B79632394AC7FD36E0B
-:1056B00032DF6291F79F48FEE3787571A4B00FE581
-:1056C0008BD72AF98897D7E1FA7AD8D849C37A775D
-:1056D000D14149E7FECCEE03BD60F95D1926FF4CD0
-:1056E000685A4AF8C63E5A10D3FA63FCD2D0845C9A
-:1056F000E11D9F8877C8F5F98A20E202E76AF9DBA5
-:105700009EBDF28F6B9C8C27CE8FCDED7723E23F31
-:10571000FE65FE385FB11A7F37AA4DF17973E53D1A
-:10572000C80958DFC8EC767EC76066A64B9E2F215D
-:105730007696DB72DDF25D84107B4B69B63C6F843C
-:10574000D59D3C8FFD3A6EB657EAF33E6E33DF339C
-:10575000D5D3EA5C6937F8BFBA27F1A045DEFB7FF5
-:10576000C412D8F122D16BA0B76F01E6FB08E2BDED
-:10577000197E1FCF4F7F47A3934F69EF65E8F474FD
-:10578000ACEE22DF972871DADDAA819ECAD6287C8A
-:105790001FB1A44EDE27F6AD51E4BDFC1EEC578FC1
-:1057A000CFF99ADF517AFC1711B250C3EF7CFB910D
-:1057B000D71C295DF8FD53DDAF6C927F0633106F67
-:1057C0003FB7369CDF41FE7A58D18F017F64B687A0
-:1057D000D76912F134D49F1AE3FB29BE97882307B7
-:1057E000616F5CF0F3B7F87DE19ABD29FCEE61F1E1
-:1057F000EEBCD57847E5EB61BE3B72897E8B9D2E72
-:105800003BE490EAC6583E9717F4D1EEA98B76F6A2
-:10581000E7E9EBF360AE94078A3C729C0B9A3E4535
-:1058200008B34D35D593E77FE83ED4EDA2A1F695B8
-:10583000D0F72ABECB9E027B89DD6057D5ED31B60D
-:10584000ACE373709ECFB777FFBB8DAFEB76474D60
-:105850009F5DD8A9CF664FE803B97F9DE2821DBD49
-:10586000CCE9BE11F1F565876C88F01493E2DCF2A7
-:10587000DD92BBE4BB2525B7E6313F9B8F35C9C719
-:10588000BD8751BC8FCB0294C6F7BCDFE7AD7B650B
-:10589000C01ED053D0CBF7E0CB5C5E7B9C412E2A60
-:1058A0006D524CEF18E8F91773A51D723EA919C087
-:1058B000DF4DB7A6D8F186D07C128F1037F8BA46E4
-:1058C000277A3BAAC771259352C541F9AE14C19DF1
-:1058D00022C733FE4E514993F93D06AACF72DDFE31
-:1058E000DC28EEAFD845F34E41EA6238090F8CA7A9
-:1058F000F67BA83F378FC3EB511A0CD86037988FCF
-:105900007816CACF75056C18A7A451BE8FE25B2B21
-:10591000C7F1AD89B5E7402EB0BAEC038CF260A3B5
-:105920007CCF78BEF6FB11042FCBCB658427DCF34C
-:10593000D2EF7D86E2AB5883BFAC29D62C5F36AD63
-:10594000B3617DE6F4F05EC3971A1D97348EE1FBD8
-:10595000F565562FDF97F069F8FEEBB2F0BBE12753
-:1059600099D3FC902D05798D2F7D093CF7069E82F9
-:1059700019FC3ED2B2708E679EE36AE2F976E2FBD2
-:1059800001C20FE4155711E39BE8C48F38C0B2661B
-:10599000F3FA76C11325DF656F2EE6FDB7C8EAB3CB
-:1059A000BB8C70ACDF9F81FB5B7368DFE3FD27E19D
-:1059B000F2F17DCC530FDCC8BFFB063881E7288F9E
-:1059C0007B02DE3B22BA61BAD6E9674181DCCFFABD
-:1059D0007851C3ACD20E3FECBBF6A9F720E4F30636
-:1059E0005A6FD8FF7BDAA7765C00A471ED65F2DD13
-:1059F000BAD07DABEF577D9FEAFB56DFCF8FD98AB8
-:105A000082894A17DFA1F3BDF6B96EF03449837776
-:105A1000AEB6AE84D75785C1AE376298DCDFF3539C
-:105A2000CDFB1FFDA1DF54BD7C6C3003F73DF5FAC3
-:105A3000FAB8F3E3643BEC03D05BEA304B67FDE577
-:105A40005CDF62E21FA59DFC63FBAA04F08F1D0AC8
-:105A5000FBE196DF23E5BEE5CFC87BE16796BFF8A3
-:105A6000F62CAA77FAC18D0B8CF72FCA82925F2C85
-:105A700024790BFC6391260F6CCCF4E50D33ECE735
-:105A8000B2FB9FC9C4FE98DB92770A6FA8D1BCF91C
-:105A9000BDA33F3FF3D28757B9BBCE5D7D1E256BBB
-:105AA000DEB5153B8D7893F47E7756079F5BA5385E
-:105AB000B7E853696331F36191487A8FD2B5EEA1AB
-:105AC000F450DCA8B09C575A3732A0FE2FF2EBD22C
-:105AD000B553F98D287DBDF4775FF47357877FA6A2
-:105AE000B64E73357A9E3D4CEEC3B9E529F645BCFA
-:105AF000FF53ECF8BDCD395AF99C32F3F7CEF5726D
-:105B000075F2FBD5D827B89F84F5EA586B93F6CB8E
-:105B1000ED97AD5732E4021D8EC59A9D72A1666F56
-:105B20005CA4C9CBB45E8B8DEBB5F871B95EA5CF23
-:105B3000BEF517BC5346F3D3DEA393EF0A94B4EC3F
-:105B4000E0759BB3669D2D85EAFD64588A29FEA801
-:105B5000B436CF053BFDDC351B6DE0073F1926F160
-:105B6000164AF7F3B5F8621DAF388F14833F47AF7D
-:105B70000F3EB883C6B9755978B4F177ED021A3D76
-:105B800097D6C6C661BCD2DAE27BA17FE9E740E8DE
-:105B9000FE3B112EF74509F587FD79628C87EF559D
-:105BA000CFD77E372FB4FE431ADDFDDA26DFBF4C98
-:105BB0008A6C7992E33B6A223CE013E9E9AD018CFF
-:105BC0000B7A06DC768B7C2F33BDB2F573C041A215
-:105BD0003CC7F520C57B5B10ED1328BFC922EF79C8
-:105BE000A5AA32DDA7E107A637948B5EADFC1E5F48
-:105BF000E7BB5121F46A179BD7E0DD1F7B2FC1EF74
-:105C0000A6E9F4A9F7A3D3A74EBF3DCD6FD7F79C64
-:105C1000DF8914CDCE92E54976D0B80BEE1BC4BF18
-:105C20006BF15DF3B46BEF3576CE374CFEDEC765B6
-:105C3000F34D97FA52CFF36D2E4CE866BEA1F3D424
-:105C4000F7891E43DFE94F6992FE94130A9D63D4DE
-:105C5000EEC4B2708EABD3E7A5DBF5BFEFBD878F87
-:105C600086C569F6AAD628C897F3B5DF51114199C0
-:105C7000C7F7A986EFFAF9AFBF5FA7F3E993B5DAE3
-:105C8000F9285AEFC17E1675697C0FF558D389281B
-:105C9000BC1373628C844F6F77AB4DDE73165176F5
-:105CA00037DECFBBE9D63CFEBD94858D7D589FBDC8
-:105CB000A92E8DF9C24D7E581745A71EB048E38323
-:105CC00091B716AFBE02F5D7A7F0EFC22D747A4E8A
-:105CD000ADE7F6433D9013239BA7DA53591E96FA7E
-:105CE00082EE17BB5511457C4F0D7C12FBCBB23FAA
-:105CF0001DE7CFE2F5523F9864116BE03F1DD8508D
-:105D000034A12FF8C4C38AFC3D9A0DE6F7BC860E79
-:105D10002AFA027C26F45DBC5B6D2D5EE8A782E466
-:105D20000ED8D1163A8B589EBF45E393C79ADBF83D
-:105D3000BD7E1DAF8FE0BF78A72AC47E146A271AE4
-:105D4000A8D907FF1FAF8F7B3D0080000000000037
-:105D50001F8B08000000000000FFB57C0B5C546541
-:105D6000DAF87BCE992BCCC080C84512878B84850E
-:105D700034C080D7DA518150BBA0BBB9BA218E653F
-:105D8000CA650650DB5D77D7FE8CA1A6667DFA4515
-:105D9000A665ED80976AC376483428A8C90B99593F
-:105DA0007F62376A2FB9635BE62D40BAFCEDBF6DA9
-:105DB0007DCFF3BCE7301751DBFDBE6FFCF97B797B
-:105DC000DFF35E9FFBF3BCCF3963348C751B186324
-:105DD0002A8B8E413968488964998C8D09695F6185
-:105DE0004C89C3F625DB45C64640FB7C93C8621947
-:105DF0002BD731FA7D8FBF1F31761F3C37C3F3425B
-:105E0000A934D607FDD737CCA072C9D6C26DAEF182
-:105E10008C250925B1936360C0E36AB6078A25CE55
-:105E20001977302BCCD3A48DD225C373B52B29C7BA
-:105E3000E09F6F49E343490CC69D69D4CF77437B0C
-:105E400081694E41148C5FBA332A5B32FBFB5D6F74
-:105E500011181BC958A573461C4B61CCF1DDE167D5
-:105E60004CA9B01F98D304F37FE50977BBA08BA39F
-:105E7000AE2D4982233CAAB3A758A07F95D8316F95
-:105E800012CC734E70EF4DA0FEE63853C0FAA1E578
-:105E9000E93AC6CCE98C39FFCF8734CFE7E2893BBA
-:105EA00016C07887737F04CE53F5F81FF201326C69
-:105EB0009D68CFB2E4E1BC8D7B4D121C747B6356B0
-:105EC000099CE3BEC7C746DA332F9FF7B668B6A86A
-:105ED00004DACBDB18C157695FE88ED420DCED5EB5
-:105EE000A6316169629A6828CF486C9507CADB526F
-:105EF000D8A2B9067FBB0DE100EB9E89DC9254026B
-:105F0000ED157B9F48324379D6C8EBA57B7F7A9C01
-:105F10004540FFDD5A0DE2D5AE621A0B8CBBD7258A
-:105F2000D8DC50B2F268C61210A36E7D9991B159B7
-:105F300096709AAF627B0E63B9FE7DC1736A3FAB08
-:105F400062C5B88F31F503D9CBA1FC8BCA7B1FE2A8
-:105F5000F32FB57A8B2B19F16226BCFC658B548428
-:105F6000EDAEFB053656C0FA7E631AAC5F16C96A01
-:105F7000717CA1F4579B04CF571C10B2B5307B78CD
-:105F800066B7E61E039116D159B589D3D98A7675BD
-:105F90005122E07F458B402D0E9557331CBE2A2F92
-:105FA0004D66E680FD56B6B668CCB08EA319CE0914
-:105FB000FD1D9E539AA5785EB685B17CC027FE89EB
-:105FC000F86B3EA5B937003FD5AD1C2ECE56DEBED0
-:105FD0003803903B99B66213D2A0DE2650BD3E6BCB
-:105FE000C2FC35AAC07AFEFC3569589A084E4C3579
-:105FF000905402F0DC94D1A341FC3BD7CAF3425D3C
-:106000001DB05E0D12E548DE9E6AC0F1661AAF3C17
-:1060100077B646D178AF336C03BB0936516D50610A
-:1060200059EF344460B9B356CC50597173611609B5
-:10603000E0DF111691C52261CAAA5E3D4012503BB5
-:10604000705884F6DC48FB83489F710CB802E83333
-:1060500091790506F4DFDFF9592ECE7FCB18DF17D3
-:106060000CB6AE5E337D7E01D0C3268B7C8E4C5F3A
-:106070002ED2F1C84340AFB0BFA7D56C833E07CF47
-:1060800057C2E6423BCCC208CFDF84B9F7C0DFAFCE
-:10609000316F22CECF74DE541CF79ACCA7255AC399
-:1060A0000601F6F59B14FB63B88F3B05F5F86C1100
-:1060B00071208DC57EFD6AFE9C6D79C2A603FC4FE2
-:1060C000E7E867A345E66240A29A51F106A463C1DE
-:1060D0006663AB60FD07330FDDCB802E1E1ED03113
-:1060E0002D9CAF5ECFCF3D7D20EC9400FD468F2AE6
-:1060F000165916F437AB5829F43F94297A55D89F8E
-:10610000E9DCD89FE90A6DBE0C599681FCD0887AEB
-:106110001BF5EF78F31B01CA44E9E2E1483857E286
-:106120002F054B3DF4291B3CFDF4FF85B2F452537F
-:10613000CBEFA1FC75A4BD19517772B0F8941D5036
-:10614000F6B0C9A3B364F2F902F7DFF1AB6F22A294
-:1061500045FFBEFA074EEF7BD98AA5CE22C0B8E92B
-:106160001D92579B75F97EFAE361E3A9D48FE1395B
-:10617000FB0DA25B10B0FFE10F717FD37506AF146A
-:1061800081E3D4177C3AFF38661E1D75FA4646280F
-:10619000F83E91B158DC3C8C1FB8687037C1B96FBC
-:1061A00091F94FA1AF1E8B48F8E991F1A4C091E994
-:1061B000B222917EEBD58A5EF085B34C3F7FD6E864
-:1061C00038FF0C5E126D38FF60B9D6CD608AC18E83
-:1061D00054D2275792A77F0079CA40D7BC976AFB51
-:1061E00033C20FF94A07FC78970C2FC03FC3F9253B
-:1061F00079FEBB64B8DD6510399C7E120227996E6A
-:1062000014BA50F62F98635869B41F9FECD7DD4736
-:106210002393098FE3FF83E3EF13C2DF3727D60110
-:106220001BB151FF984578FC5FC09F57B4FE0BF837
-:10623000EB0EC59F577F3DE2EF71D1D284FC800801
-:10624000C8A1D226C2F9580623FE2F93C22C9BE088
-:106250007C76E4FF9B88EF8F22DF2BFC3EA6D837AD
-:106260001EF5E449C69EC17DF9440FB5A766A71087
-:106270009F5FC7BA13B01DF09C3717F12ED876E890
-:10628000242C7DFB5E86F55D1506CB1E386FBF5B4B
-:1062900074A961FE8628F78EA5B06EC35D991617A6
-:1062A000B63396D58672A03CCC827ABE218ACB8545
-:1062B0008605E9A4870F7E2725ADC2732C08B33469
-:1062C00041FF866CDF2313A0DE30D66C7141D757B7
-:1062D0000596BE1DC7CFD1D13A0D7338DD363C329D
-:1062E000DA8D7A05F4CFF37AA83F591EC6F09C0DDB
-:1062F0008DB68468A0CB9722ECA3B361FFA3244E94
-:10630000D70DC9D00EE536A164C17D38DF78BE6FE8
-:10631000DF82B017F7C22CFA341059D07E7295B1D3
-:1063200009E5A5429777A5737937C6756A07C2C98B
-:10633000359D65D4C2FC7F93E94B81BB60636C558E
-:10634000B41FFE0A9DC5C8701756737A734D97E542
-:10635000623573D70B085FE60B07F8966941414237
-:106360006934D9ADB8EFFAE5801709F7CFE17F526C
-:1063700064E59E61F8E747282CF3884C04E48F32EB
-:10638000C6F9A30CE908E96F15D05100FD31DF759E
-:1063900051A7C3653A82F16B8D25D370BDCF853F80
-:1063A000E463E3897F4AF3875B67563697030BF410
-:1063B000F699D89FED8E14515FAE30F1F54E647FA3
-:1063C000361AF5C5C95FBD791D96C7234A6ECB86BF
-:1063D000FEDB167C5D84E2FC6F093E359EE36F0BAD
-:1063E000FEFF68B443CA56BF49F4FE43F759281963
-:1063F00032504EAF047DA615B0E474B0F23E467440
-:1064000090C86A896EE365FD050CA3473975F300F2
-:10641000D88ECABCF0FF4797746C89CE5F9FC6A226
-:1064200082EA33740941FD0B4DC941CF6F8D1F17AF
-:10643000F47CA6393BA83E3B635250FFDB2DD38250
-:10644000EA774E9C19D47F8E6D4E50DDC64C241FCA
-:106450003AEA8A733F01BBE1B5BA92DC4F5497E345
-:1064600063AAF6D07EB305E824DB3B5F3509EA91E9
-:10647000875626437D53CB115E4F3CF44532E06690
-:1064800073CBD1F92AD0DB536F3CF4450AD41F6D8E
-:10649000E9E2CFA7C062A340ACB6BC39DF05F89AE9
-:1064A0009B62DF8AF89A77A9F6288AF9F7D7CCBDDC
-:1064B0002F5942B930677406EC2737C5FE103EBF2E
-:1064C0002BF69E759100FB1F7D5BAB463CBF985D34
-:1064D000B215E9A1FF22A7F353889791FF7E099691
-:1064E00003D9618A9CBD923C54F8AD03F4C61215E1
-:1064F000C24947A5B7CE44E5A1BA782A8FD499D925
-:10650000128063575D0695C7EA2CD47EBC6E229537
-:1065100027EA6C54BE5B574C65775D09950AFFB25C
-:10652000BD960D6A2442972AEAB4CE4F8F57D263A4
-:106530002028D969059FD0F94DBDAD399BCE759DF9
-:1065400009E959693FDAF9815904FA9D6AD5113D83
-:106550004F35749B75565E47B9B8FB22F38A11BC60
-:106560009F2AB05F8C271BFD98A90E03F54B1B8457
-:106570007E59D8EFCD0494F7536B3516B4639E5013
-:1065800033971EF66F14DF90701DE320CA6CD80598
-:1065900018D53A905771A06BF139F4633A28770F08
-:1065A000F2F54647D72E47F934BACC60A9E7F29501
-:1065B000E44BE2086F02EE2F71A586DA8D628F1927
-:1065C000E5605F9D7716D269812CE70A345CEF3075
-:1065D00011E4BD807CFB6D5722DAF3EDDC9E2FD0F9
-:1065E00096EC44FAAE5671FE65317AF71E5C47D5DB
-:1065F0005DF12CF4EB894DB46C4268C51F64696091
-:10660000B717D61467A2DCED615B88AFC15EFD13DE
-:10661000D2DB8F3381DF459948609EF8E2F0A64DCA
-:1066200002DAADD7E7215DCED59A0F30E0075FF6ED
-:1066300000D1FBDC48731E7A0ABEECAF793DCE7CFC
-:106640004080E7263630BF00EA55CFE94D9F04F081
-:10665000A9D3131554AF694B307D12C0A755F80765
-:10666000FA47B7092A94BB0E792BA704FB05C4B7D8
-:10667000B3F8730DDFDF8006EDD88BD966A26FB05B
-:106680009749EF0FCC34BA9B60BF71236AB357A010
-:10669000FD9469CEC37E49EA8108F463FABF5515BB
-:1066A000BBC9EF1988F8C9783F7D3DD321517B28BC
-:1066B000DDB5E6707FAF26CDB019F1501DAFD351D7
-:1066C000D971B188919D56928676B94DC3FDCBD0D4
-:1066D000F17B73B81E495EAF21B940A208B66C0BBE
-:1066E000634ADDC52632D6F88BB021BF07C0C93456
-:1066F00063653FC8356247415A507F1BF61F7A8E4B
-:10670000F61CF38F4F7949BB63AD4A5E0FE96529EB
-:1067100073A33F182AC7AB72A365B9C0F1FC748C90
-:10672000BE11F19C26017DE750C94C50268633B23C
-:1067300037135FD7BB913E77EB39FDA789BCDC2DC2
-:10674000F2FE9A30E6427A57FC874DB9F629B979BC
-:10675000348F97E6915AB291AE139887D657EC24AE
-:10676000A51FD8437A1202AA8174C4D754491C16B3
-:106770009E2772A615E58C44FEB0B14F03E4775F07
-:1067800078C4AA40FC55E37843E0B8E9344E19EFE9
-:106790005C25B24F47905C243A72A689E42F564B91
-:1067A000EC8880FE16EBD6A09E53C6F5821CFC1426
-:1067B000F0F047908B587E08F210D7FF33C8432C77
-:1067C000FF0AF210DB4F823CC4D207F210DB3F0617
-:1067D0007988E5BCBB8D56E49F9AB669ECD3207EE0
-:1067E00050DB7D01F5DE69C3D39143A6A3DEE4E16E
-:1067F0009FAFCBE17E45EF2D1C9FFDA0BFD1FF00D9
-:10680000BA5C6B8ABEB21EEF37B2F91E80D3B67C7B
-:106810006E87F427F0FAD21C35D56D22DB8EE3B7F4
-:10682000E56BF8FA2962393EB745F3797BD345B277
-:106830009FA64E9EB624079EDB62A13DC75FEFBDBB
-:10684000813FB78DE2ED437A567E3E25D7A4F8EF1F
-:10685000E9DC2F65642701BDD3FC4AFFF726723EB1
-:106860000CEDEF4E138BDDC3C0E32D996F892FD054
-:106870009E463E480EE08B6A33F18542870AFD55FD
-:10688000E57238A769653A07DD42F0431D83723A25
-:106890004E4FF625C0C5C6E03CBB05995F42F901E5
-:1068A0004AD4070A3F287CA0D07B22F09910ED3F04
-:1068B000C7CD21F4AA948FCAE7E88E35FE9CF0DAA2
-:1068C000A136A1DF7733CC87E313C5C177EF46FE4E
-:1068D0008C359AD1F52C7CC8503B9C1CEBFAEFC24E
-:1068E00043910B5780C76570D0F0F25F8503C939BB
-:1068F00094E348BFC3C8ADFD39D1B25DCEE9F744DA
-:106900008E6D1FD251BFA057A1DFD0AF67C3DAD9B8
-:10691000DBF2397F287454053A10EB8978CED4CB5A
-:10692000E59E729EA1732E6324FFD2C2787B289EBF
-:10693000957305C8BFC33901F11FC6B87D711DD855
-:1069400017E84F4DC935D33EFA477E56B695F9CF75
-:106950007F470E6F7F4A94881E14FD32D42E488BD9
-:10696000E66406E91D66423FAF534BFCEE057FE649
-:106970002518873E219BE43FBF20E37170FE58112C
-:10698000EDBBBEAF0D2ED4637DA3064E0A30BE6FA5
-:106990003B18366497D86E1340EFDE073A06F5D4FD
-:1069A00005907B2C9DB173721CA1CF73F124FA73F7
-:1069B000353B24A603504A3BBE9A87F4B4B4536DCA
-:1069C000A2B8D0F6C78E213D9E6E15CC6897F4B55F
-:1069D000C2F1A1BFB3C1E8D643FF22A863FF650699
-:1069E0008DDBCCD7A3F883435EEF537D750AC68554
-:1069F00066EC5013DC973E2FB9D13E3BBC7DA50A17
-:106A0000EBA7DD028B837145D2EAAE04A8573E2D79
-:106A100058B430CE61283A8BF182CAE799C50BF39E
-:106A200057B618C9CF5DDAA0FED817605F94BBB720
-:106A30006AD0EE29DF19DC5EB93BB80EF822F9EF17
-:106A40006886F600F9FC6D8E3186ECCD712C1BED5D
-:106A50004DD6C0E3B98A7CBFDC6E757139BA82CB82
-:106A60006DC6BE8C457F5FEAFC2AE96303AFCF9118
-:106A7000EBA7A0FEF9571C2F0A5CAAE5B53F4F60B3
-:106A8000560F9CB7BA536F42FFBFBAFDEF1118B74C
-:106A9000AF09F3517C9FBD2299D0DEDBD826B91017
-:106AA000BECE0EFD2E11E0567DE03D8DD988705F83
-:106AB0004EF6CAADCCB51EE3DC5E5164DD4447DD65
-:106AC00014A766B681A5384F5FBBDE847640F52BF0
-:106AD0001F74DD8DF50302D3231E47FB884E96EE0F
-:106AE0004086A52DDD26E4FBE94442BC229E3D9173
-:106AF00084AF658877C433E01DF12C213E71BC5111
-:106B0000E3E6742251FDF4731CBF0ADE8BA4CD1A98
-:106B10006CAF6CE4789EB163CFB630A2033593E9D5
-:106B200080F07E7A27C7BBA6739D6614D26F630878
-:106B30001DB46B87E800F777191D84E0BF02F08D64
-:106B40007220940E42F1DF93C3E506D8DFA79F427F
-:106B5000FBDB087E01F3C7234656F51E8D81F5CA7F
-:106B6000A2CF3B9743FBD8F89758DA088A7F15E401
-:106B700062FC6BE63BEB105D3DB35EC8467AA957FD
-:106B8000FBF63C81718BA8708AE3F427CFD9F932E8
-:106B90009CBB20FA9BA416D87FCD6B5ABADE28C9BD
-:106BA0001587EC358C9729F174C033C5C99C1D5AE3
-:106BB0001E176B2DB405FA73FD09FC5C859A81B232
-:106BC000E5E817C07CB88E60E37E5E55078F172816
-:106BD0007E59951237680E8E1B08A677A85F452E42
-:106BE0008F5FA5C6DD6C463BBC7E01B387A55E4DBD
-:106BF0003FF078CCD3B2DF7445FBF10A7A42B11B87
-:106C0000992B386EA1C8A96513F91E8FFEE2B86AE8
-:106C100004C6FD760B848F8A0E904F70DE0AB7DAB9
-:106C20006D1602F849EEFF19D21BC0ED8CABF6A031
-:106C30002821DD1968BF0E993EAB918EE0BC95D638
-:106C40003722F09C0E59AE38DA8D147FAB645B8A24
-:106C500090EE2A613DEF30F454F95C0BF929D7A28C
-:106C600027C5CEAC6E0DEEB7317748CE8CFF1EE057
-:106C7000BB016439D77B2E99FE3223F1DE6F9099E8
-:106C800023919F87F49FC0ED3745FE5CBF1D583CA4
-:106C900060DE716E1D5305AC7FE373A6A0FA784FDA
-:106CA0007C50FF9BDACC41CFB3BD1941CF738F59D4
-:106CB00082EA79DD1383FA4FF8D016549FE42B0E45
-:106CC000EA3FE54C49507D3013CE7395FBC15BE341
-:106CD00085A0FE33CDFAA0F967674405D5070D32CC
-:106CE0007C64BB52B1775FCEE5F66E68A9C0F776DB
-:106CF0004BF03A8ABF7EE7C4E0F5E6D882D7FBA125
-:106D000078D90BFA54057EC273A05FB1FC1DF8134D
-:106D10002AF0139AC19FC0FA8BE04F60E9017F020D
-:106D2000DB5F027F02EBADE04F60FD20F83F586F64
-:106D3000AB2BA6F295BA126ABF16FCBAE4758FC9DE
-:106D4000EB1E97D7FD77E174429EEF5D79BE6E9C96
-:106D50002FCDFFDC593C56BC04FC3C2DFAACC68759
-:106D60007EC30A5F11C62D06DE9218C6A599DD7D89
-:106D7000AC2E06F5D9088A33B39281B731AE527D75
-:106D800020D5B4C98CFAEC0FEFE2F3BE56C98C7C67
-:106D900079A8EDEF1138CF854B61745F4A7A10EF17
-:106DA0001BBF6154DF04CF310E3AB3050408E93745
-:106DB0000FE9B70B694ADD4DF7BD25CD2D1AC45338
-:106DC00015F2293C7FCBA30E7EFE5C63D07313F6D5
-:106DD00087B24AE5A638C2B936653E2FF577A4F1E9
-:106DE0007BCF73CF1D5E3F05F56FCBE211787F5EE1
-:106DF000D5FC5EECBD57C1C7E7075FC8A4FBCA76E8
-:106E000098CFE09FCFD9AE96EB7CFF8EB496A26868
-:106E1000541CCD021B0BC505B685EE5FAADAF63809
-:106E2000506E5565DCAD66009F7E8F24C737F8BD78
-:106E300091C3C4B81DE7F92202EF575FF71CBDC329
-:106E400086F8ED381C81EBF6B74A41FED3682BB7C4
-:106E50008F475B3584BF0BAD8723F05E77A3E730A8
-:106E600087BBCA4BE73F24D7FBA12478B74974FE00
-:106E70008A4B62D03D768655A27966B68D35E2B9E9
-:106E80007A3C7CBD1CAB99B7A72D5E82FB3F1EBF31
-:106E9000204F227B100435CAF11B66EF413BA4CA88
-:106EA00023D986F3EF0AE479BBD49C4EDF4ADBDFBB
-:106EB00085F2F878F1886CD2118A9F69E5766F9136
-:106EC000C69E867AA4C76036229D3F589C6A44FCC1
-:106ED0001EC212DB8B7769EC06BCC7E6EBF598BAED
-:106EE0002390EE7A5A7325B47794F9F2E57587E822
-:106EF0007B086F2EC253B9BBD180F3F8F1C7DB73A7
-:106F0000AC26EA7FDCFDDE3CB4AB7A32C2C92EE9A6
-:106F1000D230F2A7AB9AB95DDCD391D818784F92F2
-:106F20006395FDF20C91F0DAD7A696FBDDBD8705DF
-:106F3000F553D3392FEC0EDE8FC97DEA51B4C71D4E
-:106F40004F4B0CF5A2435D1B8BE7FF6C67F0FECA4D
-:106F500065383BD4DED8D8007A75B40FF18D81E85E
-:106F6000BC5DE11333E153C1634F06B7E77AE2F941
-:106F7000BDA4A3650FD1F5E5F1A4EE64F41F127F63
-:106F8000A9A378E7B5FC67C56E08F0AF18FA8BEADD
-:106F9000E2D43C31C56F1FBC966BABB68E44BFAB21
-:106FA00084FCCA1E06F62CACE9447B3A92F21FB66A
-:106FB000E1BA83AD6ABABF76EADA667D0276D9A015
-:106FC000051805F63DB8532DDF7BD90C68D72E95F3
-:106FD000EDDACFCCF67C09F4AF738D48E7736486A5
-:106FE000911FD327CBBDCF5B92EF24BBE1986442C6
-:106FF0007F688687DBC18E666ED7567B92FF632AD9
-:10700000DAEDCD6ACCD4608A1DE294ED90D3B2DD86
-:107010007B7ACD8086FC9B4E813D968C792A5BBB2A
-:1070200012E1B9337316D9B34EA999EC8965DB83A4
-:10703000ED07B06F82EA55CF85DA17727CCB13DC8F
-:10704000AEF887DBAC4376C638F4670AA5A971C8E9
-:107050000F2FC87855FC9B95E32D94B7B351659ECF
-:10706000A5C421105E359DFB2B70DF6E479885FC13
-:107070008D55AF105CFBBFE47E4C7F3C2378F4332E
-:107080000EDFFE364EE7356AC18DF9483540B6341D
-:107090009F4E70AFC138B36B3082E41363C5C8171D
-:1070A0002B16707FD586315F286B157E08D1ABB764
-:1070B000A87C5254809C68B3A650BF020DB3A33E77
-:1070C0005B69B4907E1BA3E3767AE16A4F36D2C344
-:1070D00018F0C7B501F1F831860101FBED7E80C7DC
-:1070E000FF9578C21C95491D15A01F195B43FD959E
-:1070F000F941A2F0F1D79ADF04F31BFCF303BC23A0
-:1071000011DE5F582DA4B793E628F7FFB5C497CAE0
-:10711000792E00BD611C1863348837C7CE37C89FED
-:1071200073B2EEF538AE2882EFA308F783F5305E30
-:10713000FE5196E7B179BCBC4D2E15F9D590677B11
-:10714000DF0AF59579F63F5949AE99883E57CAB49A
-:1071500002F64C9C6F18F9BBE21D89F0FA05F003AA
-:10716000F2FBC25AC19C16642F713AAFE14DEC3C60
-:10717000F3F44E4538B86CDD1998D7C6387F2D5AD0
-:10718000A537A705DE0720BDA3FF5102FFF2D12FCF
-:10719000E3BF7253C56D9457B52AD68CF71735C81F
-:1071A0000F29D7A6FF50BA87DF4EA4B76AA6B5A0AD
-:1071B0007EA9690B7D6E51A13DFE4D085F24C97407
-:1071C000DA6817E87EBDF15B158FA3950A1437BB0B
-:1071D0000B1A914EE987FDCAA7B9717ECCB3A0FB0B
-:1071E000AE861839EF2B86EEE17E229FFF2E95F7B3
-:1071F0000DE4EFA36A4F32C6718E3AF93DD502E62F
-:10720000A17BDD52D64D656F78F5012F4DEE1A8DBD
-:107210007EF807762DC5911AD7361951CE66B1B5CD
-:1072200026BC1F033679EEFBDC2BDB1BA1F7689431
-:107230009F95E7C7F3CABC92F83CA0833380A3F8BC
-:107240009CCBC757BD7F2002E17EFEFEFDF37ECAC8
-:10725000D00F02B905F354D6B664D0BD8C8B7567D8
-:10726000E4FBF1ABE053C11FB49983F00A67B90E98
-:10727000E0339F0DE4636ED3B5F0A9C039493DF00A
-:10728000630425E8319243A17856E05ECD6AD53C8F
-:10729000FE56FBEE02E8FFB3B5A219EDCACBF07EB5
-:1072A0000DFC78F5FC91D728903F7B257C29785AF6
-:1072B000C8BC54FF308A8FFB70A144F1C3FF697CC6
-:1072C00035E4D94BF2AEC2B7A17C7A25BE5CB42AB4
-:1072D000847F43F874882F2DF02F007FF65511C45A
-:1072E0008F0A7E1D66F09351FF75182D6E76393E1C
-:1072F000D1DFC5FD54B60AEC49E187F0AB8FFCE362
-:10730000507C01ADD8501F54E705F3A982C72BC9A3
-:107310002D45EE7DC4BC474D02DD67703EFE85966F
-:10732000F2E994FB0CE5DEE2D13CAE6F42CB8FC0BC
-:107330006EC17BA24D193D23D1DEEBD528F3F07B46
-:10734000D78FD6748FC67CCD8FA6F1B257C3F34CBE
-:1073500094BA2D8CC7033F4AD0BA106E1F09E3A61A
-:10736000A31DF091F0CB3B783D4E63C6FA82B8E99D
-:1073700026A8F7AA95F8E183B2FC7653F9D18209E1
-:1073800005D44F6047101E668195D03A82105D0C7F
-:10739000FBF9E8E76373F05E4039FF03793C8EF454
-:1073A0001BF91C43F1F65F09146F5F04AAC384F74D
-:1073B00002D39F284E81F693BF4ECDA6FBCA15C1BE
-:1073C000EBA3FE4DA638E5569AE7964B03EAC5991E
-:1073D000FE7D0DE9CD828BBC7DC9D8A07C665BF4B7
-:1073E00038EE27BB5323518F297A6DF0D87E436046
-:1073F0001CF5AC1C771EAA8F7B2429502FBEB1F739
-:10740000E1749CA75CE3CAB218308FF9A924B41FB9
-:10741000CAF73E944E76EDDE8DE9E89F94373D9CA9
-:107420006EA37AB89DFC23153FF7F97D93766D0A1C
-:10743000B0A36F9DC0EDFB52DD1B8568DFCEBAF1B6
-:10744000F37518B71FFB6B81E2700B59F73AD4B78D
-:1074500065199CAF58838EE43FCC47F7A47BC6DD0B
-:10746000BE1BE5FEF18CBFAB97A0FECD53D17C6572
-:10747000CCBD390EE36F1B048ABFF9FB8FA67BD707
-:10748000C56B054D7C0CEA519E77FDC7BC2882E395
-:107490003D1BB2BBB0BD6C356F9FA575B7F6E03C28
-:1074A0004F6828CF0A14654A49C03DF61FF3F83DDE
-:1074B000DDA2CD72BEB1BCCED86DB18D81E7FCA38B
-:1074C0008C7F56FE01C9833B65BCDCB6FABD23F157
-:1074D000306FA4DAFE67942BEF3E7E3A0DE55941FA
-:1074E000F4D94CA4F3B11AFB931578EE262DC52BD5
-:1074F000AD5989521CF4CFB97FDA63582E5ABDF8C2
-:10750000C90A8CFB6ED7911FA6EC6F856016D15F00
-:107510003DDCF8D37B106E671EE779A42B1AAF8F82
-:10752000BB5AFEE2B3753C1FFCF93A1D952FD49966
-:1075300098198EB8AF2E9EEABFAF3353C9E673FADF
-:1075400052F2A6AE345FEEA530CA5BB66ED0511EC5
-:107550007DAED6F6551EC06BEC0DCEA68DF2B9C62B
-:10756000C2F86C57F20C848375E3F22E34614FE558
-:1075700071FFEAED9E0D496487AF3EF54C053CCFA7
-:10758000CC2FF90EC7EB765EA478C1E1F687CA105E
-:10759000DEE54D5A7E3EF9DC671E4F8F7B12E3BC61
-:1075A0006FA9C97FAFD979EA998D50DEBB79B92629
-:1075B00090DE7FE879BF95F7732DBEBA121CFE7579
-:1075C000BE7A3889F8A709F82AF3DFE7AB9AD56BBA
-:1075D000087E73F34BC6E6C3FECFA85D49C84F676C
-:1075E000C6DD4C74EEEA1408FE8A1C57C6A7E6F303
-:1075F000FBE82AD1B399EC48598E7F059E23C2F748
-:107600008DF6CFD2D18EFEAA6DC155CF7DB00E3D85
-:10761000228C9BE9A80C7D9EAFB1A7625E71BEC8AB
-:10762000EDE7D0E7B7E72B71781EB7C59F1090A79D
-:10763000E2848D4546A3FE13BC6120979D6DB79EE5
-:1076400055A1FF067EE1C7C17628FB3840AF5F69D0
-:10765000BFD72AAB711E955FEE4EF85064DE003D39
-:107660003EC917C6BC01EB0EF92BD0A6A1FB9E04A8
-:10767000920B8837CC87EA6B1FD784F5B31A8EC775
-:10768000BE83E097F1B80C93F2FDE73CDB7E3E0B46
-:10769000E56CE879AB5F394FF4E1687BE8A240E73D
-:1076A0009F79569575EDF3BFB1F77C16E2EFACDA32
-:1076B000978FFE579FC6978578A87E95CBF37F1549
-:1076C0000E4A7BC5060D8F130A26F2230BA50B1459
-:1076D00007E83BC6E300D5EDBB489E0E76F0784C3C
-:1076E0008DD85D1487F18BDA535D28CF06E3B95F3F
-:1076F00006F3DB28CF2155D683AA81A43920D71ED3
-:1077000019A207EE0F9E41FED5E03C1E07E561651C
-:107710008533B42BCE213F437BD9AAE4F548E767F4
-:10772000DC2373503EBE9DF58F6A8ADFBD1E6E92CC
-:10773000C88E9530C778084E43E7704B3CD18729F7
-:10774000767138B305F4ABD198EF24BFFA38BF9FF8
-:10775000ABB981F3137B85F39373ED1B9AF880F932
-:107760007E25F393624FCE7AFD1FC4970FE7DA9E12
-:1077700040BE0C475988F3C547521EB5F21E8772AA
-:107780001F69E890FDF862899ED7B4490CEFE5586F
-:10779000BC91F20A8AD916CAB79CC53C53795E8F50
-:1077A000EFD129F07CF6EB522EE6A1813D4DF7DBBF
-:1077B0004561F634CCD3EA150519AE1EEB9C007D6D
-:1077C000F67E3EF757A74A02E9B1818470B253664C
-:1077D000CE7796E27E957E5A91EB339887EC2CE635
-:1077E0001EC8C27B55E61DC8C2FB56A5DFBCD7C369
-:1077F0006B492F328F755EC03AA7F379BCF30BBC8F
-:107800001F07795223DFC3164ADF6E437F6B45277C
-:10781000BF7FEC15933FC03C3317C019F17A1EF0BF
-:107820006A43FD6367361BF2CFF8916EE49F9A7D41
-:1078300002C37CBDEA766D13C685AAD5BE58A4E7FF
-:107840008D6DEF6B909E6BF05E763C8E6772BCDC4C
-:107850004479BF3526C6EFF5DAAEFF00E376CE6396
-:107860005C8B3A55EF513C00E536AE57D5DA42FE17
-:10787000BF8379C9FF773407D3CD603C8FE787F2A8
-:10788000C9E97C73107FCCDCCEF9631EE6731B68FC
-:1078900038C55F67C6C7915DE21FC7F16093CEAF81
-:1078A000433BA63F45A07CFCFE30D75AB48F5CE931
-:1078B000DCAEE97FED052BBDF7A3735B7F8CF93C54
-:1078C000B2DD3B73C3569514B09F991D3CDED81FA3
-:1078D000C6CA0F12DEEDD7213E7CB92567F231BE54
-:1078E000A31978770AC683441E1F0D3D875D8E6BF2
-:1078F0001C67FCFD2865DFB31313B93C636EA2A3BC
-:107900002E39BF5BC9D751C6DF324150EED1B89F87
-:107910002458AEFA5E1ADED7609E2BDED760F93BA4
-:10792000391F16EF6BB0FEA29C0F8BF735D88EF780
-:1079300035586F95F361F1BE06EB785F83E52B72E6
-:107940003EEC71DC2AE5F16D7C0AE9A20B796D94BD
-:10795000BFDE1B1D521F15DCBF375A08AE8F12A8A1
-:10796000BF69C2C6A730FF7893922FC5CC46B4C377
-:107970002AC2F9FB1AA9067BEC04F4F38B77ED45D8
-:107980007F1EF89BDE9F2B885E504AEF97C46819D4
-:10799000CAA3DB27D8474F80F1C78ECD48DB4A7298
-:1079A000524FF7ECBD3FBB3192E27A6F494C8225D2
-:1079B000A765E4AEB5427D9A4120FA85F96E2A5159
-:1079C000FC4C986746C762AB8ACB0713DACB85922B
-:1079D0006309AEB322419F8B72F888D59E81FB511B
-:1079E000E05D346A591ADA455D6AF307189F75BD80
-:1079F000A366E85729713CA5DF93D669F9B8BF990A
-:107A000019A96B73707E60369477360D6BC6FDD9FD
-:107A1000C470A19EE4975985F2207F02A79BE96676
-:107A20006E1F7B35665534FAF561D362F05EB74B55
-:107A3000C6F33119CFC7653CE33D57818ADF7361D7
-:107A400089F75C5886E6A32DCF2FB14D20780F24FF
-:107A500005E6B3CD92DF97000AA1F7D49C721CF320
-:107A60004B59EE34E695DCCAC779689E2A398E7781
-:107A70005E1D7C6FA88CF38F6754CEBD89CB6B16CF
-:107A8000A9E179BFD73117E615CF7D3981E2507D65
-:107A90006ED1A506BCCF055E4779C65EE6FE2E8B8D
-:107AA000E77C33777F1CF5AB97E3A9CEE8EE747CD7
-:107AB000AFA34FE62FA57EF03B9E97E4CC81BA8121
-:107AC000DE23A1F339E776A74741BD4FD08B485F4E
-:107AD000CE26FEBC47E63F678A3C9F7C1EA6F32469
-:107AE000213EFA3B5F4EC2F7103719BC4BB9FCF789
-:107AF000A693DC66DE74CC6F3A2F784E62BEF1AD91
-:107B00006D29A5986F7F5EED7906EBB3DBD2785DCA
-:107B10006839690A7C3ED29384F9C8B7B6A59662E3
-:107B20003EF2F9912DCF445902EAEA974EE273CD25
-:107B30008369A5989F3C5BEB3E568774F37B4E5F51
-:107B4000FA7D074E237CAADAB9FD3E7DDF810B2F3B
-:107B5000A17E3E60A4BC8275139209DFF5EDCF6E65
-:107B6000467AEB6B51133F6C6A7EFF99DF503F2DD5
-:107B70008559666B3D560CC994B41DBA1BF7353B4D
-:107B8000DCF325D6174FBC89F6317B04E7EBA51350
-:107B9000734A914FFB0EECFB05EAB3D99160D8E232
-:107BA0007E5ED0137E2AF78F2BC0B8409FB1BB0CEE
-:107BB000E7AFFE9D96E71FEC8F9B8E7182FF9CC006
-:107BC000F3312A6ED89284FA567CE5F9BDBFC1F82C
-:107BD000E6EFF474DF5313CDEDBD4AA9317F39E1EF
-:107BE0006FD75ECC5BE97B5E4FF7AF151893B3E2BE
-:107BF0007BAC63293EFFEA3FFF5E8678289476EEF1
-:107C0000C5F62F77EB4584438FC6167933F2618F23
-:107C10009AFCCE0AB95ED13B82EF27DC5744F88B41
-:107C2000D99284FAB672C4AFEEC07DCF96B63C83CB
-:107C30007E0F7B564B770E679F07B8C1B8B37BD4D6
-:107C4000984903FB30AA905ECE0B5BCA9EC4F9F73D
-:107C5000F07EE7F55B089EAE3DD7335C0FFA31D47A
-:107C6000C7E785AD41ED67F73C9B857EE9B9DFCD80
-:107C700026FF54A173855F2A776B83F422498258CB
-:107C80008C5BCA3F938B1902E259E70EEEE87B92B8
-:107C9000F9C79F6B567B3500A30A2D5B8BF9CD0A84
-:107CA0003F5426DE5A8CE7AB141BD3D17EA9C8F50E
-:107CB00095215F9CD5335D3CF47B5BD65B95AD6BCA
-:107CC000E6A01D7CA5FDFC4596475FC97CF8559B49
-:107CD000DE1D78DF185AFEB58E994FA8FCF585B5E4
-:107CE0005AB2E595F9DED6781CE8AF554773F971BD
-:107CF00012FA37831CFB93ACEF16AD0AEEFFEE04CD
-:107D00009E4F59ADF1A5A3FE53E67F7B8289DB87A9
-:107D10002A5F3ACAABD071B32559DEBC2090BCA90A
-:107D20006C154ED1FB2408D2583F3C2B752E37E6FC
-:107D3000130D8787F87C190F12E6F170BEAA6CD676
-:107D4000DBF4304F55982F02ED2587D117817650FF
-:107D5000DF2B126B92D117A3CC9FE25F4F89535652
-:107D600078D436FD70EBC171D04F5E867F03285604
-:107D70004FE47C53DE164EEB31932F1FE9B67C6740
-:107D8000F0383CA729801FFBDA76C506FAEB0CF722
-:107D90004DF751A7886FFAFFF931BD075E29B2B5DB
-:107DA000784F794EE0EF83409DDE073927DF775625
-:107DB0007E6D0843FA39F79583F8B84FF0919C7BB4
-:107DC000B1CD4672AC4FED2339B76B6211AF47F9B5
-:107DD000CA506EBD38F1A7243FFA127C65F89ED2D6
-:107DE00066A58E2FCC811DD0D1B690E4C96C89E7F1
-:107DF00051B05D6A138F1371782F93E1C4D886DE7A
-:107E00003AF243D466B4973A272AF7421AFFF92583
-:107E10003F3FF531F3BE56E4CF7203C57DC0BE6A65
-:107E20007E09EDC005B1168CA787C24DB95F8C895C
-:107E3000FE6629E2E91DA37DECC43CBCCFF4919F12
-:107E400001D44EF67CF56B5AF237FBD5037B517E9D
-:107E5000B98DF67113019E0E4DF77A547117D4BE89
-:107E60002E34ED6721BD911CE1F4D697B98BBF0785
-:107E700022DF4F4E92F100FA8C35227D081CCF870D
-:107E8000DBF69F4079D3D79D4A723A949FCEB63D98
-:107E9000168172E343D0EFAE8078C0878B9FA57CBC
-:107EA00080F9980702E53D6B83CF37F8ED8FC92F36
-:107EB000649B03DA911E1B82EBA17041BAF406F1B8
-:107EC000818BF67D3FF21BC0A76A7A7735C261A825
-:107ED0003E17EA5240FD50483DA43F2BE1F6C3FD5A
-:107EE0001318CDEB18EDED253F7E1FCFEFAD07BD8D
-:107EF00046F503E1743F2DEE03BD15C3F516EA8B7D
-:107F0000AA886E8A5FF51DD0D2BDCA83ED9F25E198
-:107F1000F9811E294E53D5FE722CFAF7EB2698698B
-:107F20007ED08FB1941773A03D16FD11A5DD217A87
-:107F3000D2E5F70CB2507E28ED4EC99B4E79E54252
-:107F400077163E5F27CB1987087509EB8CCEE110B9
-:107F500038DFB37689E47C28DE56C9F40AF2218B37
-:107F6000F2395EE1F103451E54C872E510B667723E
-:107F7000FE3729F75278CF847C3F8C9CF85A8123B6
-:107F8000ABA5F8CEFD13CDBC2E8FA77979FC89E780
-:107F9000EDBD7A3E2B2513C79995F745FDF228D5FF
-:107FA0002F5F500EC4931C78501D0BE7AA7C46B07F
-:107FB000D4C3908AD23545D09D2D532D2FA2B81A07
-:107FC000E6E71A2EDF57281D454EE4F8AD14B91F19
-:107FD0005EB957A0FBA5736A7E6F07F286DE0F5865
-:107FE00056B0A608F9EFBE18A726D05FBED6FC4B48
-:107FF0001B82EBCB6AD714C50DC3E795ABB6768D64
-:108000006497CF57616F2C8A355FDEAEECFB9C5EC8
-:10801000D9E774F5C84078CC5F533412CA65BA7F8B
-:10802000171EFCDCE7DAB55ECA572D5D43F7C4B70F
-:108030005CAA0D8AB35E6BBE0AE6A67B902BED3F71
-:10804000B47408DE5E8C2B31E0AF3DC467C03701ED
-:10805000EBC5CBF43A149F285F3C06FD53665F3CAA
-:1080600026303E115AE29B3322E58AB8A8043E2C02
-:10807000B30C030FA5FFD1893CCE1A3F91D3F1A8D1
-:10808000D9553B5E6214D7E941F97BA5F74CFE2236
-:10809000EFEF07BF6732239CF7EBD49B30FED3DFB3
-:1080A000F90DC587FBD719E6F37B07034B80E75D26
-:1080B000F1E39B02E3C0AB26713B24DCCAED9D9A41
-:1080C0000CF5D5E34B99C6A1F812D91B99E174DFE1
-:1080D000D2D7F605E9B7FE8E3C13DE8BF475BB0DE7
-:1080E000C86F35FFFC7FB1A887FB3A3EA5BCB4BE84
-:1080F0006F3FA37CB58D72DEE0A13639DFABDB6C60
-:10810000C4F6FEE2BF1761BF4D72E98F2FF0F898F9
-:10811000522AF18300FFF93BD4537B4C1B1FC554FB
-:1081200099CAB02D24BFC07F8E46BDE18F2B98E346
-:10813000868BC304C615D2543CAE8025C615D2D258
-:10814000785C01EB1857C012E30AD88E7105AC6356
-:108150005C01EB1857C03AC615B0C4B802B67F2907
-:10816000BFE7D10F828BC73D0D24F757627E33C026
-:108170006F6527BFBF5AB947A27B617CCF03F5DF8C
-:1081800065793BAD72DE8E672BDD07D61C902C889F
-:10819000227C1FC4958EF93B0347311E54D32258CD
-:1081A000D698B17D3EED636347DE07A5D8BE476D27
-:1081B00011CD444F1C9F8D825B8F7CD5B187E257D8
-:1081C00005719D94EF5FD32C308CBBCED3723FD919
-:1081D00029416B0EDDAB921DEDD47693FF52F59CD9
-:1081E000600E7CEFBB66E2459213CA7DF552FE88B5
-:1081F000393D7AF392203D6BE37957F827ECC72994
-:10820000E777931D1260172DC57B6C6C97BEA5F7A1
-:108210004D9CE0E08E10AE9D7755D9D1B21EF3B5DE
-:108220007E68FE55E124F9DE3A9BBF4752FCF89286
-:108230007D0760BDC12D5AB2536E9F60BF6D521E47
-:10824000E619D828EE72B4534F7ED6275BAF0F8A5B
-:10825000BB144AD751DC63855A20FD7DC46A9F3B1D
-:1082600009E87246F1BD146F99116F243E56E8F08B
-:10827000496BC94F70DE15E3F977980AB5ECE7341E
-:108280009F9CCFA5E0A9B05E70E3F72C16330BBD21
-:108290003FB008C0877151E5FB1F8B18CFAF50E886
-:1082A0006AC55681E88ABEBC10F0BD8445F83D1011
-:1082B000D07FF76AB9FD9B28F27BF2C44D3C8FE278
-:1082C0003E66A7FC9165487D12E9D7D77CD06E0F3A
-:1082D000BF2E89DBF7E6389C7FF17135E50717C6BD
-:1082E000DD9E6E273D5F40F91382F76EE9FB1BAF01
-:1082F000263F83F3278EAAB9DC0178929FD585F4B7
-:108300004AF11E3B95C7EBCAA99C22BF1F16FA5E15
-:10831000437FE7CB2D38BEB0C66041F85FF13DC06A
-:10832000B0ABBFFFE694F3EB12C59E5C33C2E36BC8
-:108330008305E15118D749EF89A5CAF33F9C5BB289
-:1083400009F1698B602E5C1FEF69B6007C8BF040F1
-:1083500002C6D13D367CCF66A05330513EF56572E2
-:1083600074EB3ACC53A949134C18AF2D0ADB5218C1
-:108370000BF317A524D377766ADA781CB60F4A4E2A
-:108380000753DC92C0C7AA62317ECFF1E8CBB53F7C
-:108390003D29CFDF3E5BE6B3FE8E2F781EF1B5E3BD
-:1083A000B4BBE9FB1C4C4FEFAFD30FF635FBC6D186
-:1083B00014AF55E868B039AE09E9A845D613A5A5AC
-:1083C000EFA9D18E68CCB337231CCA965C5C174BDF
-:1083D000E71C3E4EA6E4DF87C6C902E5EDFF46DE98
-:1083E000FD89BA5A2ADFAD5B4565779D8B9E07E80C
-:1083F0008B2308BF1F106F7D7BD230F156A6334709
-:1084000092BE05BEE7F1ED90F82AF0BB18C0EF333D
-:108410003AA2EED980F64883C682F7CD98FFBCD247
-:1084200040F2E1FD49C3C65915F819282E3BC8F49E
-:10843000398887E919A92A119EFF6D921014E74423
-:10844000BEC17322DF60897CA352F9F9E6690DA3EE
-:10845000EF94A17DE022FB404FF85DBF06E40AD413
-:10846000EF65A620B9722144AE8023F3337A5FAC66
-:1084700043CB3609FEFCCFE9505CCA1946CE78B82A
-:108480009C191DE6799EBEB3501D46F9C5C0EF4448
-:10849000674737F2BCBD25AC84D61D46DED07B3E97
-:1084A000F78E1838F914F4BFF76103D939EB139636
-:1084B000E6FF77E4CD9F2771783C81DF73505DED57
-:1084C0007B0E9B05BC8F5DB1906523BE95EF39C4D3
-:1084D000C118F27BFFF5EF398C983C12BFE7E00A38
-:1084E000FA9E43DC15BEE7306AB27161E0F71C46C4
-:1084F0004D1EB130F87B0EC685F89DB2FFC1EF3935
-:10850000A44FCEBBFC7B0E374E36FFA0EF39803D2B
-:108510009B89E34FE4D8C66399289F3BF4FDE5E3CC
-:10852000F23D6497682FC5B228C2A5A276D16DC569
-:10853000F26DD1733FB6035F4C4478153D967D03D1
-:108540007E972551EBA1BCF227ADB64938FF6BB938
-:10855000B6C9F83C34DE5F2F9F0FF6730BF60BCDD8
-:108560001F53E8E2AEC95C0ECD93CBA9F5C3BFC7DC
-:108570003F6F32BF4FBED6BE61BF77E07ACAFED929
-:1085800096C556DC0FECF74EDC27ECB7044B66883B
-:108590000E7A0FF8727A75C9FB62742E908FB33F12
-:1085A000E1F62895E92A7714DA0DA31E7047E17EDB
-:1085B00047350EE8F17D90DFBA06F4683FFC76F5AA
-:1085C000801EDB7F6BE3F9DAA1F36F9FCCFD91F4A2
-:1085D000A903347E0CFCDD4DFEC14014DA6DE9E5E3
-:1085E0004734AE147A4F6DF62741769399F87B8C19
-:1085F000DC36E60191213D8CD9C1781E63410CE93E
-:10860000B94A1DEF5AF9C0FD22D2D13837EC3B8070
-:10861000FEAEDFAE1A0C7EAFD74BE3AAE425C05EF8
-:108620000B7AEE643CBF74942C8FD05EC4EFD939C2
-:10863000CB8FD077A6C08E0B998FBE7930944F59CF
-:10864000ADB3BFE63353BE6250BFA577FF663DFAB8
-:10865000B5E5A55B35E4172F69598FA5C3F19E26B3
-:108660008E917D19D41FECCBA0FA65FB0CD947F590
-:10867000FD17D7C70DB32ED0C156A413850E8EAAF1
-:108680003DE3D04F3DEA0CB3F0F71D3CF45D9A2674
-:10869000F9BDF45DFF39DDCAF365395DC0F81D3FF2
-:1086A0008C8EEAA9BFF21DAF6B958A1C1CFACE8D89
-:1086B00086B9285E39CB4872AE46F6FFAA9798C8AD
-:1086C0001E51F8BA5AE539B51EFBC51879FE9B8ACA
-:1086D000D1F7AB7AC45194CF4D3FACCF4AA5FBAC98
-:1086E000D87A8F17E71DB85DA0EFB9158473B95A12
-:1086F0002896389E85E74744FE5D81A7517E4898BD
-:1087000047C1BF37302597BF3F10CFF877DB98CAF6
-:108710001CF29D36391E7AEDEFB4F1EF92CDE7F7FA
-:10872000720D5125A5CBF1F9821BE8F9C1EF521F5B
-:10873000B1E2FE2A94EFB4717BBF614E063D7F55D6
-:1087400030AF413DE17A805DE93B6D7AE4FB80EF3B
-:10875000B3BD87F8BAD6F7D994EF0F1C5D70C32369
-:108760007B391CBD78EF5533CB18E4AFFF17313C94
-:108770009ED2C05600000000000000000000000073
-:088780000408350000000000B0
-:00000001FF
diff --git a/firmware/bnx2x-e1-5.0.21.0.fw.ihex b/firmware/bnx2x-e1-5.0.21.0.fw.ihex
new file mode 100644
index 0000000..c51afd4
--- /dev/null
+++ b/firmware/bnx2x-e1-5.0.21.0.fw.ihex
@@ -0,0 +1,10184 @@
+:10000000000028B0000000600000068800002918E9
+:100010000000161400002FA800000098000045C042
+:100020000000738800004660000000CC0000B9F0BA
+:1000300000009A4C0000BAC0000000940001551066
+:10004000000057B8000155A8000000B80001AD68D5
+:100050000000CE1C0001AE280000000400027C4815
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000060400CC0000000418
+:10010000020400DC00100000020400E012140000F1
+:10011000020400E422140000020400E8321400008B
+:10012000060400EC000000040104012400000000AB
+:1001300001040128000000000104012C000000005F
+:10014000010401300000000002040004000000FF70
+:1001500002040008000000FF0204000C000000FF81
+:1001600002040010000000FF02040014000000FF61
+:1001700002040018000000FF0204001C000000FF41
+:1001800002040020000000FF020400240000003EE2
+:1001900002040028000000000204002C0000003FC0
+:1001A000020400300000003F020400340000003F61
+:1001B00002040038000000000204003C0000003F80
+:1001C000020400400000003F020400440000003F21
+:1001D00002042008000004110204200C00000400A6
+:1001E000020420100000040402042014000004197A
+:1001F0000204201C0000FFFF020420200000FFFF7B
+:10020000020420240000FFFF020420280000FFFF5A
+:1002100006042038000000020204204000000034E0
+:100220000204204400000035060420480000007C41
+:100230000204223807FFFFFF0204223C0000003FB7
+:100240000204224007FFFFFF020422440000000FC7
+:1002500001042248000000000104224C00000000BC
+:10026000010422500000000001042254000000009C
+:1002700001042258000000000104225C000000007C
+:10028000010422600000000001042264000000005C
+:1002900001042268000000000104226C000000003C
+:1002A000010422700000000001042274000000001C
+:1002B00001042278000000000104227C00000000FC
+:1002C000020424BC000000010C042000000003E82C
+:1002D0000A042000000000010B0420000000000AB6
+:1002E0000205004400000020020500480000003222
+:1002F000020500900215002002050094021500205E
+:1003000002050098000000300205009C0810000063
+:10031000020500A000000033020500A40000003028
+:10032000020500A800000031020500AC0000000238
+:10033000020500B000000005020500B40000000640
+:10034000020500B800000002020500BC0000000227
+:10035000020500C000000000020500C40000000506
+:10036000020500C800000002020500CC00000002E7
+:10037000020500D000000002020500D400000001C8
+:1003800002050114000000010205011C000000012B
+:100390000205012000000002020502040000000125
+:1003A0000205020C0000004002050210000000409F
+:1003B0000205021C000000200205022000000013BC
+:1003C0000205022400000020060502400000000A89
+:1003D0000405028000200000020500500000000714
+:1003E0000205005400000007020500580000000844
+:1003F0000205005C00000008060500600000000423
+:10040000020500D800000006020500E00000000D13
+:10041000020500E40000002D020500E800000007CE
+:10042000020500EC00000027020500F000000007B4
+:10043000020500F400000027020500F80000000794
+:10044000020500FC00000027020500040000000176
+:1004500002050008000000010205000C0000000178
+:100460000205001000000001020500140000000158
+:1004700002050018000000010205001C0000000138
+:100480000205002000000001020500240000000118
+:1004900002050028000000010205002C00000001F8
+:1004A00002050030000000010205003400000001D8
+:1004B00002050038000000010205003C00000001B8
+:1004C00002050040000000010406100002000020A8
+:1004D000020600DC00000001010600D80000000058
+:1004E0000406020000030220020600DC00000000F7
+:1004F00002060068000000B802060078000001143F
+:10050000010600B800000000010600C8000000005D
+:100510000206006C000000B80206007C0000011416
+:10052000010600BC00000000010600CC0000000035
+:100530000718040000960000081807600014022342
+:10054000071C000034B80000071C800034E90D2FA0
+:10055000071D000009DD1A6A081D14005D800225D0
+:100560000118000000000000011800040000000055
+:1005700001180008000000000118000C0000000035
+:100580000118001000000000011800140000000015
+:1005900002180020000000010218002400000002E0
+:1005A00002180028000000030218002C00000000C0
+:1005B000021800300000000402180034000000019E
+:1005C00002180038000000000218003C0000000182
+:1005D000021800400000000402180044000000005F
+:1005E00002180048000000010218004C000000033F
+:1005F0000218005000000000021800540000000122
+:1006000002180058000000040218005C00000000FE
+:1006100002180060000000010218006400000003DE
+:1006200002180068000000000218006C00000001C1
+:10063000021800700000000402180074000000009E
+:1006400002180078000000040218007C000000037B
+:100650000618008000000002021800A400003FFFFE
+:10066000021800A8000003FF021802240000000086
+:1006700002180234000000000218024C00000000C2
+:10068000021802E4000000FF061810000000040039
+:10069000021B8BC000000001021B80000000003420
+:1006A000021B804000000018021B80800000000C2C
+:1006B000021B80C0000000200C1B83000007A1204B
+:1006C0000A1B8300000001380B1B83000000138805
+:1006D000021B83C0000001F4061A2000000000B2D3
+:1006E000061A23C800000181041A29CC0001022740
+:1006F000061A1020000000C8061A100000000002B0
+:10070000061A1E3800000002061A1E300000000201
+:10071000061A080000000002061A0808000000027D
+:10072000061A081000000004041A1FB00005022871
+:10073000041A4CB00008022D061A22C8000000203E
+:10074000061A400000000124021A4920000000009F
+:10075000061A14000000000A061A145000000006D1
+:10076000061A150000000002041A150800050235DB
+:10077000061A151C00000009061A15800000001456
+:10078000061A09C000000048061A0800000000020E
+:10079000061A08200000000E041A1FB00002023AD8
+:1007A000061A2C2800000002061A23480000002028
+:1007B000061A449000000124021A49240000000097
+:1007C000061A14280000000A061A14680000000621
+:1007D000061A154000000002041A15480005023CE4
+:1007E000061A155C00000009061A15D00000001456
+:1007F000061A0AE000000048061A08080000000275
+:10080000061A08580000000E041A1FB80002024120
+:10081000061A2C30000000020200A2800000000135
+:100820000200A294071D29110200A29800000000F6
+:100830000200A29C009C04240200A2A00000000070
+:100840000200A2A4000002090200A4FCFF000000B4
+:10085000020100B400000001020100B80000000124
+:10086000020100DC000000010201010000000001A3
+:1008700002010104000000010201007C00300000C0
+:1008800002010084000000280201008C000000002A
+:1008900002010130000000040201025C00000001BE
+:1008A000020103280000000002010554000000308E
+:1008B000020100C400000001020100CC00000001A0
+:1008C000020100F800000001020100F00000000138
+:1008D00002010080003000000201008800000028B2
+:1008E0000201009000000000020101340000000439
+:1008F000020102DC000000010201032C00000000E4
+:100900000201056400000030020100C8000000017F
+:10091000020100D000000001020100FC0000000103
+:10092000020100F400000001020C10000000002091
+:10093000020C200800000A11020C200C00000A0022
+:10094000020C201000000A04020C201C0000FFFF13
+:10095000020C20200000FFFF020C20240000FFFFFB
+:10096000020C20280000FFFF060C203800000002C7
+:10097000020C204000000034020C2044000000352E
+:10098000020C204800000020020C204C0000002136
+:10099000020C205000000022020C20540000002312
+:1009A000020C205800000024020C205C00000025EE
+:1009B000020C206000000026020C206400000027CA
+:1009C000020C206800000028020C206C00000029A6
+:1009D000020C20700000002A020C20740000002B82
+:1009E000060C207800000056020C21D00000000107
+:1009F000020C21D400000001020C21D800000001EB
+:100A0000020C21DC00000001020C21E000000001CA
+:100A1000020C21E400000001020C21E800000001AA
+:100A2000020C21EC00000001020C21F0000000018A
+:100A3000020C21F400000001060C21F80000001057
+:100A4000020C223807FFFFFF020C223C0000003F8F
+:100A5000020C224007FFFFFF020C22440000000F9F
+:100A6000010C224800000000010C224C0000000094
+:100A7000010C225000000000010C22540000000074
+:100A8000010C225800000000010C225C0000000054
+:100A9000010C226000000000010C22640000000034
+:100AA000010C226800000000010C226C0000000014
+:100AB000010C227000000000010C227400000000F4
+:100AC000010C227800000000010C227C00000000D4
+:100AD000020C24BC000000010C0C2000000003E804
+:100AE0000A0C2000000000010B0C20000000000A8E
+:100AF000020C400800000365020C400C0000035487
+:100B0000020C401000000358020C40140000037552
+:100B1000020C401C0000FFFF020C40200000FFFF01
+:100B2000020C40240000FFFF020C40280000FFFFE1
+:100B3000020C403800000046020C403C000000055A
+:100B4000060C40400000005E020C41B800000001AD
+:100B5000060C41BC0000001F020C423807FFFFFFDB
+:100B6000020C423C0000003F020C424007FFFFFF26
+:100B7000020C42440000000F010C4248000000003B
+:100B8000010C424C00000000010C4250000000002B
+:100B9000010C425400000000010C4258000000000B
+:100BA000010C425C00000000010C426000000000EB
+:100BB000010C426400000000010C426800000000CB
+:100BC000010C426C00000000010C427000000000AB
+:100BD000010C427400000000010C4278000000008B
+:100BE000010C427C00000000010C4280000000006B
+:100BF000020C44C0000000010C0C4000000003E89F
+:100C00000A0C4000000000010B0C40000000000A2C
+:100C1000020D004400000032020D008C021500207D
+:100C2000020D009002150020020D00940810000033
+:100C3000020D009800000033020D009C000000022D
+:100C4000020D00A000000000020D00A4000000053D
+:100C5000020D00A800000005060D00AC0000000217
+:100C6000020D00B400000002020D00B800000003F5
+:100C7000020D00BC00000002020D00C000000001D7
+:100C8000020D00C800000002020D00CC00000002AE
+:100C9000020D010800000001020D015C00000001CE
+:100CA000020D016400000001020D01680000000255
+:100CB000020D020400000001020D020C00000020E1
+:100CC000020D021000000040020D0214000000405E
+:100CD000020D022000000003020D02240000001893
+:100CE000060D028000000012040D030000240243E0
+:100CF000020D004C00000001020D00500000000237
+:100D0000020D005400000008020D00580000000809
+:100D1000060D005C00000004020D00C40000000489
+:100D2000020D011400000009020D01180000002945
+:100D3000020D011C0000000A020D01200000002A23
+:100D4000020D012400000007020D01280000002709
+:100D5000020D012C00000007020D013000000027E9
+:100D6000020D01340000000C020D01380000002CBF
+:100D7000020D013C0000000C020D01400000002C9F
+:100D8000020D01440000000C020D01480000002C7F
+:100D9000020D000400000001020D00080000000127
+:100DA000020D000C00000001020D00100000000107
+:100DB000020D001400000001020D001800000001E7
+:100DC000020D001C00000001020D002000000001C7
+:100DD000020D002400000001020D002800000001A7
+:100DE000020D002C00000001020D00300000000187
+:100DF000020D003400000001020D00380000000167
+:100E0000020D003C00000001020E004C0000003208
+:100E1000020E009402150020020E00980215002018
+:100E2000020E009C00000030020E00A0081000001E
+:100E3000020E00A400000033020E00A800000030E3
+:100E4000020E00AC00000031020E00B000000002F3
+:100E5000020E00B400000004020E00B80000000002
+:100E6000020E00BC00000002020E00C000000002E2
+:100E7000020E00C400000000020E00C800000002C4
+:100E8000020E00CC00000007020E00D0000000029D
+:100E9000020E00D400000002020E00D80000000183
+:100EA000020E00E400000001020E014400000001F7
+:100EB000020E014C00000001020E01500000000271
+:100EC000020E020400000001020E020C00000040AD
+:100ED000020E021000000040020E021C000000047E
+:100EE000020E022000000020020E02240000000E6C
+:100EF000020E02280000001B060E03000000001274
+:100F0000040E0280001B0267020E00540000000C59
+:100F1000020E005800000007020E005C0000000FE7
+:100F2000020E006000000010060E006400000004C5
+:100F3000020E00DC00000003020E01100000000F92
+:100F4000020E01140000002F020E01180000000E16
+:100F5000020E011C0000002E020E00040000000121
+:100F6000020E000800000001020E000C000000014B
+:100F7000020E001000000001020E0014000000012B
+:100F8000020E001800000001020E001C000000010B
+:100F9000020E002000000001020E002400000001EB
+:100FA000020E002800000001020E002C00000001CB
+:100FB000020E003000000001020E003400000001AB
+:100FC000020E003800000001020E003C000000018B
+:100FD000020E004000000001020E0044000000016B
+:100FE0000730040000C900000830076800130282BF
+:100FF00007340000341200000734800037B70D05B5
+:10100000073500002E7D1AF308356F405218028410
+:10101000013000000000000001300004000000006A
+:1010200001300008000000000130000C000000004A
+:10103000013000100000000001300014000000002A
+:1010400002300020000000010230002400000002F5
+:1010500002300028000000030230002C00000000D5
+:1010600002300030000000040230003400000001B3
+:1010700002300038000000000230003C0000000197
+:101080000230004000000004023000440000000074
+:1010900002300048000000010230004C0000000354
+:1010A0000230005000000000023000540000000137
+:1010B00002300058000000040230005C0000000014
+:1010C00002300060000000010230006400000003F4
+:1010D00002300068000000000230006C00000001D7
+:1010E00002300070000000040230007400000000B4
+:1010F00002300078000000040230007C0000000391
+:101100000630008000000002023000A400003FFF13
+:10111000023000A8000003FF02300224000000009B
+:1011200002300234000000000230024C00000000D7
+:10113000023002E40000FFFF06302000000008003B
+:1011400002338BC000000001023380000000001A4F
+:10115000023380400000004E023380800000001007
+:10116000023380C0000000200C3383000007A12060
+:101170000A338300000001380B338300000013881A
+:10118000023383C0000001F40C3383801DCD650061
+:101190000A3383800004C4B40B338380004C4B407B
+:1011A00006321AA0000000C206321020000000C85B
+:1011B0000632100000000002063214000000004059
+:1011C00006325098000000040632508000000005EE
+:1011D00004325094000102860632500000000020C4
+:1011E00004322830000202870233080001000000A8
+:1011F00004330C00001002890233080000000000D4
+:1012000004330C400010029906321500000000B4AF
+:1012100002321DC80000000006324000000000D865
+:10122000063217D0000000B402321DCC00000000CE
+:1012300006324360000000D807200400009200003E
+:1012400008200780001002A9072400002CCF00000E
+:10125000072480002AE50B340824DC6062DA02AB44
+:101260000120000000000000012000040000000038
+:1012700001200008000000000120000C0000000018
+:1012800001200010000000000120001400000000F8
+:1012900002200020000000010220002400000002C3
+:1012A00002200028000000030220002C00000000A3
+:1012B0000220003000000004022000340000000181
+:1012C00002200038000000000220003C0000000165
+:1012D0000220004000000004022000440000000042
+:1012E00002200048000000010220004C0000000322
+:1012F0000220005000000000022000540000000105
+:1013000002200058000000040220005C00000000E1
+:1013100002200060000000010220006400000003C1
+:1013200002200068000000000220006C00000001A4
+:101330000220007000000004022000740000000081
+:1013400002200078000000040220007C000000035E
+:101350000620008000000002022000A400003FFFE1
+:10136000022000A8000003FF022002240000000069
+:1013700002200234000000000220024C00000000A5
+:10138000022002E40000FFFF062020000000080009
+:1013900002238BC000000001022380000000001027
+:1013A00002238040000000120223808000000030F1
+:1013B000022380C00000000E022383C0000001F45D
+:1013C000062250000000004206221020000000C843
+:1013D000062210000000000206222000000000C0CB
+:1013E000062225C00000024004222EC8000802ADDB
+:1013F00002230800013FFFFF04230C00001002B588
+:10140000022308000000000004230C40001002C565
+:1014100006223040000000A00622354000000010E7
+:10142000062236C000000030062240000000020004
+:10143000062235C00000002006223840000000309F
+:1014400006223000000000080222511800000000AF
+:10145000062223000000000E0622241000000030A7
+:10146000062232C0000000A00622358000000010D5
+:1014700006223780000000300622480000000200EB
+:10148000062236400000002006223900000000300D
+:1014900006223020000000080222511C000000003B
+:1014A000062223380000000E062224D0000000305F
+:1014B00002161000000000280217000800000002B9
+:1014C0000217002C000000030217003C000000047B
+:1014D0000217004400000008021700480000000244
+:1014E0000217004C0000009002170050000000900E
+:1014F00002170054008000900217005808140000E2
+:10150000021700600000008A0217006400000080DB
+:1015100002170068000000810217006C00000080C4
+:10152000021700700000000602170078000007D0C4
+:101530000217007C0000076C02170038007C1004C2
+:10154000021700040000000F0616402400000002ED
+:10155000021640700000001C021642080000000144
+:101560000216421000000001021642200000000195
+:10157000021642280000000102164230000000015D
+:10158000021642380000000102164260000000010D
+:101590000C16401C0003D0900A16401C0000009C52
+:1015A0000B16401C000009C4021640300000000861
+:1015B000021640340000000C0216403800000010F3
+:1015C0000216404400000020021640000000000106
+:1015D000021640D800000001021640080000000179
+:1015E0000216400C0000000102164010000000012D
+:1015F00002164240000000000216424800000000AF
+:101600000616427000000002021642500000000060
+:101610000216425800000000061642800000000238
+:1016200002166008000006140216600C0000060096
+:1016300002166010000006040216601C0000FFFF86
+:10164000021660200000FFFF021660240000FFFF6A
+:10165000021660280000FFFF02166038000000201C
+:101660000216603C000000200216604000000034BA
+:101670000216604400000035021660480000002396
+:101680000216604C00000024021660500000002585
+:101690000216605400000026021660580000002761
+:1016A0000216605C00000029021660600000002A3B
+:1016B000021660640000002B021660680000002C17
+:1016C0000216606C0000002D0616607000000052CB
+:1016D000021661B800000001061661BC0000001F80
+:1016E0000216623807FFFFFF0216623C0000003F4F
+:1016F0000216624007FFFFFF021662440000000F5F
+:1017000001166248000000000116624C0000000053
+:101710000116625000000000011662540000000033
+:1017200001166258000000000116625C0000000013
+:1017300001166260000000000116626400000000F3
+:1017400001166268000000000116626C00000000D3
+:1017500001166270000000000116627400000000B3
+:1017600001166278000000000116627C0000000093
+:10177000021664BC000000010C166000000003E8C3
+:101780000A166000000000010B1660000000000A4D
+:10179000021680400000000602168044000000058A
+:1017A000021680480000000A0216804C0000000566
+:1017B0000216805400000002021680CC00000004D3
+:1017C000021680D000000004021680D4000000043D
+:1017D000021680D800000004021680DC000000041D
+:1017E000021680E000000004021680E400000004FD
+:1017F000021680E8000000040216880400000004BD
+:10180000021680300000007C021680340000003D8B
+:10181000021680380000003F0216803C0000009C49
+:10182000021680F000000007061680F40000000594
+:101830000216880C01010101021681080000000057
+:101840000216810C00000004021681100000000442
+:1018500002168114000000020216881008012004FC
+:1018600002168118000000050216811C0000000508
+:1018700002168120000000050216812400000005E8
+:101880000216882C2008100102168128000000088A
+:101890000216812C000000060216813000000007AD
+:1018A0000216813400000000021688300101012078
+:1018B0000616813800000004021688340101010177
+:1018C0000616814800000004021688380101010153
+:1018D00006168158000000040216883C010101012F
+:1018E00006168168000000030216817400000001E2
+:1018F00002168840010101010216817800000001F2
+:101900000216817C000000010216818000000001A7
+:1019100002168184000000010216884401010101C1
+:1019200002168188000000010216818C000000046C
+:10193000021681900000000402168194000000024B
+:10194000021688480801200402168198000000054C
+:101950000216819C00000005021681A0000000050F
+:10196000021681A400000005021688142008100148
+:10197000021681A800000008021681AC00000006D3
+:10198000021681B000000007021681B400000001B9
+:101990000216881801010120021681B8000000011A
+:1019A000021681BC00000001021681C00000000187
+:1019B000021681C4000000010216881C0101010109
+:1019C000021681C800000001021681CC000000014F
+:1019D000021681D000000001021681D4000000012F
+:1019E0000216882001010101021681D800000001C1
+:1019F000021681DC00000001021681E000000001F7
+:101A0000021681E400000001021688240101010190
+:101A1000021681E800000001021681EC00000001BE
+:101A2000021681F000000001021688280101010160
+:101A300002168240FFFF003F0616824400000002AB
+:101A40000216824CFFFF003F021682500000010088
+:101A5000021682540000010006168258000000029F
+:101A600002168260000000C002168264000000C0FE
+:101A70000216826800001E000216826C00001E0022
+:101A800002168270000040000216827400004000BE
+:101A900002168278000080000216827C000080001E
+:101AA00002168280000020000216828400002000BE
+:101AB0000616828800000007021682A400000001BA
+:101AC000061682A80000000A021681F400000C0825
+:101AD000021681F800000040021681FC000001009F
+:101AE0000216820000000020021682040000001787
+:101AF00002168208000000800216820C000002001C
+:101B0000021682100000000002168218FFFF01FF7B
+:101B100002168214FFFF01FF0216823C0000001330
+:101B2000021680900000013F021680600000014014
+:101B30000216806400000140061680680000000262
+:101B400002168070000000C00616807400000007B6
+:101B50000216809C00000048021680A00000004889
+:101B6000061680A400000002021680AC00000048A7
+:101B7000061680B0000000070216823800008000C0
+:101B800002168234000025E40216809400007FFFD4
+:101B900002168220000000070216821C00000007C7
+:101BA000021682280000000002168224FFFFFFFFB9
+:101BB00002168230000000000216822CFFFFFFFF99
+:101BC000021680EC000000FF02140000000000017B
+:101BD0000214000C0000000102140040000000018B
+:101BE0000214004400007FFF0214000C00000000FB
+:101BF00002140000000000000214006C000000004D
+:101C00000214000400000001021400300000000172
+:101C100002140004000000000214005C0000000038
+:101C2000021400080000000102140034000000014A
+:101C30000214000800000000021400600000000010
+:101C40000202005800000032020200A0031500202A
+:101C5000020200A403150020020200A801000030C7
+:101C6000020200AC08100000020200B000000033C5
+:101C7000020200B400000030020200B8000000318F
+:101C8000020200BC00000003020200C000000006C7
+:101C9000020200C400000003020200C800000003AA
+:101CA000020200CC00000002020200D0000000008E
+:101CB000020200D400000002020200DC000000006A
+:101CC000020200E000000006020200E4000000043E
+:101CD000020200E800000002020200EC0000000224
+:101CE000020200F000000001020200FC00000006F9
+:101CF0000202012000000000020201340000000284
+:101D0000020201B0000000010202020C000000010A
+:101D10000202021400000001020202180000000288
+:101D200002020404000000010202040C0000004052
+:101D300002020410000000400202041C0000000423
+:101D4000020204200000002002020424000000021D
+:101D5000020204280000001F060205000000001215
+:101D600004020480001F02D5020200600000000F80
+:101D70000202006400000007020200680000000B7D
+:101D80000202006C0000000E060200700000000459
+:101D9000020200F40000000402020004000000013E
+:101DA00002020008000000010202000C0000000115
+:101DB00002020010000000010202001400000001F5
+:101DC00002020018000000010202001C00000001D5
+:101DD00002020020000000010202002400000001B5
+:101DE00002020028000000010202002C0000000195
+:101DF0000202003000000001020200340000000175
+:101E000002020038000000010202003C0000000154
+:101E10000202004000000001020200440000000134
+:101E200002020048000000010202004C0000000114
+:101E3000020200500000000102020108000000C878
+:101E40000202011800000002020201C400000000AA
+:101E5000020201CC00000000020201D400000002D6
+:101E6000020201DC00000002020201E4000000FFA7
+:101E7000020201EC000000FF0202010C000000C899
+:101E80000202011C00000002020201C80000000062
+:101E9000020201D000000000020201D8000000028E
+:101EA000020201E000000002020201E8000000FF5F
+:101EB000020201F0000000FF0728040000B4000047
+:101EC00008280768001302F4072C000035D700002B
+:101ED000072C80003A590D76072D00003B741C0D2D
+:101EE000072D8000226C2AEB082DC6F0472202F64F
+:101EF000012800000000000001280004000000008C
+:101F000001280008000000000128000C000000006B
+:101F1000012800100000000001280014000000004B
+:101F20000228002000000001022800240000000216
+:101F300002280028000000030228002C00000000F6
+:101F400002280030000000040228003400000001D4
+:101F500002280038000000000228003C00000001B8
+:101F60000228004000000004022800440000000095
+:101F700002280048000000010228004C0000000375
+:101F80000228005000000000022800540000000158
+:101F900002280058000000040228005C0000000035
+:101FA0000228006000000001022800640000000315
+:101FB00002280068000000000228006C00000001F8
+:101FC00002280070000000040228007400000000D5
+:101FD00002280078000000040228007C00000003B2
+:101FE0000628008000000002022800A400003FFF35
+:101FF000022800A8000003FF0228022400000000BD
+:1020000002280234000000000228024C00000000F8
+:10201000022802E40000FFFF06282000000008005C
+:10202000022B8BC000000001022B8000000000008A
+:10203000022B804000000018022B80800000000C62
+:10204000022B80C0000000660C2B83000007A1203B
+:102050000A2B8300000001380B2B8300000013883B
+:10206000022B83C0000001F40C2B8340000001F41C
+:102070000A2B8340000000000B2B8340000000056A
+:102080000A2B83800004C4B40C2B83801DCD650013
+:102090000B2B8380004C4B40062A3C400000000480
+:1020A000042A3C50000202F8062A300000000048D2
+:1020B000062A1020000000C8062A100000000002B6
+:1020C000062A31280000008E022A33680000000032
+:1020D000042A3370000202FA042A3A70000402FC57
+:1020E000042A3D0000020300042A15000002030236
+:1020F000062A150800000100022A197000000000DD
+:10210000022A197800000000042A19600002030462
+:10211000062A4AC000000002062A4B000000000404
+:10212000042A1F4800020306022B080000000000DA
+:10213000042B0C0000100308022B08000100000013
+:10214000042B0C4000080318022B080002000000BA
+:10215000042B0C6000080320062A3A8000000014BB
+:10216000062A3B2000000024062A14000000000A72
+:10217000062A145000000006062A3378000000D812
+:10218000022A3A3800000000042A3C5800020328C2
+:10219000042A3C680010032A062A5020000000028E
+:1021A000062A503000000002062A500000000002FB
+:1021B000062A501000000002022A504000000000D1
+:1021C000062A50480000000E022A50B80000000104
+:1021D000042A4AC80002033A062A4B1000000042B3
+:1021E000062A4D2000000004062A3AD00000001400
+:1021F000062A3BB000000024062A14280000000A2A
+:10220000062A146800000006062A36D8000000D806
+:10221000022A3A3C00000000042A3C600002033C11
+:10222000042A3CA80010033E062A502800000002A1
+:10223000062A503800000002062A5008000000025A
+:10224000062A501800000002022A50440000000034
+:10225000062A50800000000E022A50BC0000000137
+:10226000042A4AD00002034E062A4C1800000042FD
+:10227000062A4D3000000004021010080000000182
+:102280000210101000000264021010000003D000C1
+:10229000021010040000003D091018000200035055
+:1022A00009101100002005500610118000000002E6
+:1022B0000910118800060570061011A00000001812
+:1022C000021010100000000006102400000000E0C2
+:1022D0000210201C0000000002102020000000015D
+:1022E000021020C0000000010210200400000001C4
+:1022F000021020080000000109103C0000050576CE
+:1023000009103C200005057B0910380000050580F8
+:1023100002104028000000100210404400003FFF5F
+:102320000210405800280000021040840084924AA5
+:1023300002104058000000000610806800000004F1
+:1023400002108000000010800610802800000002AB
+:102350000210803800000010021080400000FFFFD3
+:10236000021080440000FFFF0210805000000000B7
+:102370000210810000000000061081200000000211
+:1023800002108008000002B502108010000000005A
+:10239000061082000000004A021081080001FFFFC1
+:1023A00006108140000000020210800000001A8028
+:1023B0000610900000000024061091200000004A42
+:1023C000061093700000004A061095C00000004AF5
+:1023D000021080040000108006108030000000020F
+:1023E0000210803C00000010021080480000FFFF37
+:1023F0000210804C0000FFFF02108054000000001B
+:102400000210810400000000061081280000000274
+:102410000210800C000002B50210801400000000C1
+:10242000061084000000004A0210810C0001FFFF2A
+:1024300006108148000000020210800400001A808B
+:102440000610909000000024061092480000004AF8
+:10245000061094980000004A061096E80000004A12
+:102460000212049000E383400212051400003C10A5
+:10247000021205200000000202120494FFFFFFFF79
+:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
+:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
+:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
+:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
+:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
+:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
+:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
+:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
+:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
+:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
+:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
+:10253000021204FCFFFFFFFF02120500FFFFFFFF76
+:1025400002120504FFFFFFFF02120508FFFFFFFF55
+:102550000212050CFFFFFFFF02120510FFFFFFFF35
+:10256000021204D4FFFF3330021204D8FFFF3340BD
+:10257000021204B4F00030000212039000000008C0
+:102580000212039C00000008061203A000000002D3
+:10259000021203BC00000004021203C40000000485
+:1025A000021203D000000000021203DC0000000051
+:1025B0000212036C00000001021203680000003FD9
+:1025C000021201BC00000040021201C00000180805
+:1025D000021201C400000803021201C8000008032F
+:1025E000021201CC00000040021201D000000003E2
+:1025F000021201D400000803021201D800000803EF
+:10260000021201DC00000803021201E000010003D5
+:10261000021201E400000803021201E800000803AE
+:10262000021201EC00000003021201F0000000039E
+:10263000021201F400000003021201F8000000037E
+:10264000021201FC0000000302120200000000035D
+:10265000021202040000000302120208000000033C
+:102660000212020C0000000302120210000000031C
+:1026700002120214000000030212021800000003FC
+:102680000212021C000000030212022000000003DC
+:102690000212022400000003021202280000240398
+:1026A0000212022C0000002F02120230000000096A
+:1026B00002120234000000190212023800000184E4
+:1026C0000212023C000001830212024000000306D5
+:1026D0000212024400000019021202480000000623
+:1026E0000212024C00000306021202500000030610
+:1026F00002120254000003060212025800000C8667
+:102700000212025C000003060212026000000306CF
+:1027100002120264000000060212026800000006B5
+:102720000212026C00000006021202700000000695
+:102730000212027400000006021202780000000675
+:102740000212027C00000006021202800000000655
+:102750000212028400000006021202880000000635
+:102760000212028C00000006021202900000000615
+:1027700002120294000000060212029800000006F5
+:102780000212029C00000006021202A000000306D2
+:10279000021202A400000013021202A800000006A8
+:1027A000021202B000001004021202B40000100471
+:1027B0000212032400106440021203280010644037
+:1027C000021201B0000000010600A0000000001687
+:1027D0000200A06CBF5C00000200A070FFF51FEFBC
+:1027E0000200A0740000FFFF0200A078500003E088
+:1027F0000200A07C000000000200A0800000A000F9
+:102800000600A084000000050200A0980FE0000070
+:102810000600A09C000000140200A0EC555400002B
+:102820000200A0F0555555550200A0F40000555582
+:102830000200A0F8000000000200A0FC55540000B7
+:102840000200A100555555550200A1040000555540
+:102850000200A108000000000200A22C00000000FD
+:102860000600A230000000030200A0600000000784
+:102870000200A10CBF5C00000200A110FFF51FEFD9
+:102880000200A1140000FFFF0200A118500003E0A5
+:102890000200A11C000000000200A1200000A00016
+:1028A0000600A124000000050200A1380FE000008E
+:1028B0000600A13C000000140200A18C5554000049
+:1028C0000200A190555555550200A19400005555A0
+:1028D0000200A198000000000200A19C55540000D5
+:1028E0000200A1A0555555550200A1A40000555560
+:1028F0000200A1A8000000000200A23C00000000AD
+:102900000600A240000000030200A06400000007CF
+:1029100000000000000000000000002E0000000089
+:1029200000000000000000000000000000000000A7
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000000000087
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:10297000002E0050000000000000000000000000D9
+:102980000000000000000000000000000000000047
+:102990000000000000000000000000000050008D5A
+:1029A0000000000000000000000000000000000027
+:1029B0000000000000000000000000000000000017
+:1029C0000000000000000000008D009200920096C0
+:1029D0000096009A000000000000000000000000C7
+:1029E00000000000000000000000000000000000E7
+:1029F00000000000009A00DB00DB00E900E900F7BE
+:102A000000000000000000000000000000000000C6
+:102A100000000000000000000000000000000000B6
+:102A200000000000000000000000000000000000A6
+:102A30000000000000000000000000000000000096
+:102A40000000000000000000000000000000000086
+:102A50000000000000000000000000000000000076
+:102A60000000000000000000000000000000000066
+:102A70000000000000000000000000000000000056
+:102A80000000000000000000000000000000000046
+:102A90000000000000000000000000000000000036
+:102AA0000000000000000000000000000000000026
+:102AB0000000000000000000000000000000000016
+:102AC0000000000000000000000000000000000006
+:102AD00000F700FE00000000000000000000000001
+:102AE00000000000000000000000000000000000E6
+:102AF00000000000000000000000000000000000D6
+:102B000000000000000000000000000000000000C5
+:102B100000000000000000000000000000000000B5
+:102B2000000000000000000000FE01030103010E90
+:102B3000010E01190000000000000000000000006C
+:102B40000000000000000000000000000000000085
+:102B50000000000000000000000000000000000075
+:102B60000000000000000000000000000000000065
+:102B70000000000000000000000000000000000055
+:102B80000119011A00000000000000000000000010
+:102B90000000000000000000000000000000000035
+:102BA000000000000000000000000000011A0152B7
+:102BB0000000000000000000000000000000000015
+:102BC0000000000000000000000000000000000005
+:102BD000000000000000000001520176000000002B
+:102BE00000000000000000000000000000000000E5
+:102BF00000000000000000000000000000000000D5
+:102C000000000000017601B5000000000000000097
+:102C100000000000000000000000000000000000B4
+:102C200000000000000000000000000000000000A4
+:102C300001B501F0000000000000000000000000ED
+:102C40000000000000000000000000000000000084
+:102C500000000000000000000000000001F002354C
+:102C6000023502380238023B00000000000000007C
+:102C70000000000000000000000000000000000054
+:102C80000000000000000000023B02760276028095
+:102C90000280028A00000000000000000000000026
+:102CA0000000000000000000000000000000000024
+:102CB00000000000028A028B0000000000000000FB
+:102CC0000000000000000000000000000000000004
+:102CD00000000000000000000000000000000000F4
+:102CE000028B029D000000000000000000000000B8
+:102CF00000000000000000000000000000000000D4
+:102D0000000000000000000000000000029D02B270
+:102D100002B202B502B502B80000000000000000D7
+:102D200000000000000000000000000000000000A3
+:102D3000000000000000000002B802E600000000F1
+:102D40000000000000000000000000000000000083
+:102D50000000000000000000000000000000000073
+:102D60000000000002E6036D00000000000000000B
+:102D70000000000000000000000000000000000053
+:102D80000000000000000000000000000000000043
+:102D9000036D0374037403780378037C0000000060
+:102DA0000000000000000000000000000000000023
+:102DB000000000000000000000000000037C03BBD6
+:102DC00003BB03C303C303CB0000000000000000EB
+:102DD00000000000000000000000000000000000F3
+:102DE000000000000000000003CB041F041F04319A
+:102DF0000431044300000000000000000000000057
+:102E000000000000000000000000000000000000C2
+:102E1000000000000443044D00000000000000001A
+:102E200000000000000000000000000000000000A2
+:102E30000000000000000000000000000000000092
+:102E4000044D0453000000000000000000000000DA
+:102E50000000000000000000000000000000000072
+:102E600000000000000000000000000004530456B1
+:102E70000000000000000000000000000000000052
+:102E80000000000000000000000000000000000042
+:102E900000000000000000000456045B0000000079
+:102EA0000000000000000000000000000000000022
+:102EB0000000000000000000000000000000000012
+:102EC00000000000045B045C045C046E046E04807B
+:102ED00000000000000000000000000000000000F2
+:102EE00000000000000000000000000000000000E2
+:102EF000048004ED0000000000000000000000005D
+:102F000000000000000000000000000000000000C1
+:102F100000000000000000000000000004ED04EECE
+:102F200004EE050205020516000000000000000086
+:102F30000000000000000000000000000000000091
+:102F40000000000000000000000000000000000081
+:102F50000000000000000000000000000000000071
+:102F60000000000000000000000000000000000061
+:102F70000000000000000000000000000000000051
+:102F80000000000000000000000000000000000041
+:102F90000000000000000000000000000000000031
+:102FA000000000000000000000010000000204C05A
+:102FB0000003098000040E4000051300000617C03E
+:102FC00000071C800008214000092600000A2AC0D2
+:102FD000000B2F80000C3440000D3900000E3DC066
+:102FE000000F42800010474000114C00001250C0FA
+:102FF0000013558000145A4000155F00001663C08E
+:103000000017688000186D4000197200001A76C021
+:10301000001B7B80001C8040001D8500001E89C0B5
+:10302000001F8E8000209340000020000000400020
+:1030300000006000000080000000A0000000C00050
+:103040000000E0000001000000012000000140003D
+:1030500000016000000180000001A0000001C0002C
+:103060000001E00000020000000220000002400019
+:1030700000026000000280000002A0000002C00008
+:103080000002E000000300000003200000034000F5
+:1030900000036000000380000003A0000003C000E4
+:1030A0000003E000000400000004200000044000D1
+:1030B00000046000000480000004A0000004C000C0
+:1030C0000004E000000500000005200000054000AD
+:1030D00000056000000580000005A0000005C0009C
+:1030E0000005E00000060000000620000006400089
+:1030F00000066000000680000006A0000006C00078
+:103100000006E00000070000000720000007400064
+:1031100000076000000780000007A0000007C00053
+:103120000007E00000080000000820000008400040
+:1031300000086000000880000008A0000008C0002F
+:103140000008E0000009000000092000000940001C
+:1031500000096000000980000009A0000009C0000B
+:103160000009E000000A0000000A2000000A4000F8
+:10317000000A6000000A8000000AA000000AC000E7
+:10318000000AE000000B0000000B2000000B4000D4
+:10319000000B6000000B8000000BA000000BC000C3
+:1031A000000BE000000C0000000C2000000C4000B0
+:1031B000000C6000000C8000000CA000000CC0009F
+:1031C000000CE000000D0000000D2000000D40008C
+:1031D000000D6000000D8000000DA000000DC0007B
+:1031E000000DE000000E0000000E2000000E400068
+:1031F000000E6000000E8000000EA000000EC00057
+:10320000000EE000000F0000000F2000000F400043
+:10321000000F6000000F8000000FA000000FC00032
+:10322000000FE0000010000000102000001040001F
+:1032300000106000001080000010A0000010C0000E
+:103240000010E000001100000011200000114000FB
+:1032500000116000001180000011A0000011C000EA
+:103260000011E000001200000012200000124000D7
+:1032700000126000001280000012A0000012C000C6
+:103280000012E000001300000013200000134000B3
+:1032900000136000001380000013A0000013C000A2
+:1032A0000013E0000014000000142000001440008F
+:1032B00000146000001480000014A0000014C0007E
+:1032C0000014E0000015000000152000001540006B
+:1032D00000156000001580000015A0000015C0005A
+:1032E0000015E00000160000001620000016400047
+:1032F00000166000001680000016A0000016C00036
+:103300000016E00000170000001720000017400022
+:1033100000176000001780000017A0000017C00011
+:103320000017E000001800000018200000184000FE
+:1033300000186000001880000018A0000018C000ED
+:103340000018E000001900000019200000194000DA
+:1033500000196000001980000019A0000019C000C9
+:103360000019E000001A0000001A2000001A4000B6
+:10337000001A6000001A8000001AA000001AC000A5
+:10338000001AE000001B0000001B2000001B400092
+:10339000001B6000001B8000001BA000001BC00081
+:1033A000001BE000001C0000001C2000001C40006E
+:1033B000001C6000001C8000001CA000001CC0005D
+:1033C000001CE000001D0000001D2000001D40004A
+:1033D000001D6000001D8000001DA000001DC00039
+:1033E000001DE000001E0000001E2000001E400026
+:1033F000001E6000001E8000001EA000001EC00015
+:10340000001EE000001F0000001F2000001F400001
+:10341000001F6000001F8000001FA000001FC000F0
+:10342000001FE000002000000020200000204000DD
+:1034300000206000002080000020A0000020C000CC
+:103440000020E000002100000021200000214000B9
+:1034500000216000002180000021A0000021C000A8
+:103460000021E00000220000002220000022400095
+:1034700000226000002280000022A0000022C00084
+:103480000022E00000230000002320000023400071
+:1034900000236000002380000023A0000023C00060
+:1034A0000023E0000024000000242000002440004D
+:1034B00000246000002480000024A0000024C0003C
+:1034C0000024E00000250000002520000025400029
+:1034D00000256000002580000025A0000025C00018
+:1034E0000025E00000260000002620000026400005
+:1034F00000266000002680000026A0000026C000F4
+:103500000026E000002700000027200000274000E0
+:1035100000276000002780000027A0000027C000CF
+:103520000027E000002800000028200000284000BC
+:1035300000286000002880000028A0000028C000AB
+:103540000028E00000290000002920000029400098
+:1035500000296000002980000029A0000029C00087
+:103560000029E000002A0000002A2000002A400074
+:10357000002A6000002A8000002AA000002AC00063
+:10358000002AE000002B0000002B2000002B400050
+:10359000002B6000002B8000002BA000002BC0003F
+:1035A000002BE000002C0000002C2000002C40002C
+:1035B000002C6000002C8000002CA000002CC0001B
+:1035C000002CE000002D0000002D2000002D400008
+:1035D000002D6000002D8000002DA000002DC000F7
+:1035E000002DE000002E0000002E2000002E4000E4
+:1035F000002E6000002E8000002EA000002EC000D3
+:10360000002EE000002F0000002F2000002F4000BF
+:10361000002F6000002F8000002FA000002FC000AE
+:10362000002FE0000030000000302000003040009B
+:1036300000306000003080000030A0000030C0008A
+:103640000030E00000310000003120000031400077
+:1036500000316000003180000031A0000031C00066
+:103660000031E00000320000003220000032400053
+:1036700000326000003280000032A0000032C00042
+:103680000032E0000033000000332000003340002F
+:1036900000336000003380000033A0000033C0001E
+:1036A0000033E0000034000000342000003440000B
+:1036B00000346000003480000034A0000034C000FA
+:1036C0000034E000003500000035200000354000E7
+:1036D00000356000003580000035A0000035C000D6
+:1036E0000035E000003600000036200000364000C3
+:1036F00000366000003680000036A0000036C000B2
+:103700000036E0000037000000372000003740009E
+:1037100000376000003780000037A0000037C0008D
+:103720000037E0000038000000382000003840007A
+:1037300000386000003880000038A0000038C00069
+:103740000038E00000390000003920000039400056
+:1037500000396000003980000039A0000039C00045
+:103760000039E000003A0000003A2000003A400032
+:10377000003A6000003A8000003AA000003AC00021
+:10378000003AE000003B0000003B2000003B40000E
+:10379000003B6000003B8000003BA000003BC000FD
+:1037A000003BE000003C0000003C2000003C4000EA
+:1037B000003C6000003C8000003CA000003CC000D9
+:1037C000003CE000003D0000003D2000003D4000C6
+:1037D000003D6000003D8000003DA000003DC000B5
+:1037E000003DE000003E0000003E2000003E4000A2
+:1037F000003E6000003E8000003EA000003EC00091
+:10380000003EE000003F0000003F2000003F40007D
+:10381000003F6000003F8000003FA000003FC0006C
+:10382000003FE000003FE00100000000000001FF59
+:103830000000020000007FF800007FF80000026F27
+:1038400000001500000000010000000300BEBC20C5
+:103850000000000300BEBC2000000001FFFFFFFFCE
+:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:1038800000000000FFFFFFFF00000000FFFFFFFF40
+:103890000000000300BEBC20FFFFFFFF000000008F
+:1038A000FFFFFFFF00000000FFFFFFFF000000031D
+:1038B00000BEBC2000002000000040C0000061806D
+:1038C000000082400000A3000000C3C00000E480AC
+:1038D0000001054000012600000146C0000167808C
+:1038E000000188400001A9000001C9C00001EA8070
+:1038F00000020B4000022C0000024CC000026D8050
+:1039000000028E400002AF000002CFC00002F08033
+:103910000003114000033200000352C00003738013
+:10392000000394400003B5000003D5C00003F680F7
+:103930000004174000043800000458C000047980D7
+:1039400000049A400000800000010380000187000D
+:1039500000020A8000028E0000031180000395001F
+:103960000004188000049C0000051F800005A300CF
+:10397000000626800006AA0000072D800007B1007F
+:10398000000834800008B80000093B800009BF002F
+:10399000000A4280000AC600000B4980000BCD00DF
+:1039A000000C5080000CD400000D5780000DDB008F
+:1039B00000007FF800007FF800000174000015008F
+:1039C0000000190000000000FFFFFFFF40000000A2
+:1039D00040000000400000004000000040000000E7
+:1039E00040000000400000004000000040000000D7
+:1039F00040000000400000004000000040000000C7
+:103A000040000000400000004000000040000000B6
+:103A100040000000400000004000000040000000A6
+:103A20004000000040000000400000004000000096
+:103A30004000000040000000400000004000000086
+:103A400040000000400000004000000000007FF83F
+:103A500000007FF80000050900003500FFFFFFFFB0
+:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
+:103A80004000000040000000400000004000000036
+:103A90004000000040000000400000004000000026
+:103AA0004000000040000000400000004000000016
+:103AB0004000000040000000400000004000000006
+:103AC00040000000400000004000000040000000F6
+:103AD00040000000400000004000000040000000E6
+:103AE00040000000400000004000000040000000D6
+:103AF00040000000400000004000000000001000F6
+:103B000000002080000031000000418000005200D1
+:103B100000006280000073000000838000009400B9
+:103B20000000A4800000B5000000C5800000D600A1
+:103B30000000E6800000F700000107800001180087
+:103B400000012880000139000001498000015A006D
+:103B500000016A8000017B0000018B8000019C0055
+:103B60000001AC800001BD000001CD800001DE003D
+:103B70000001EE800001FF0000007FF800007FF8E8
+:103B8000000004480000150010000000000028ADEF
+:103B9000000000000001000100150005CCCCCCC1E4
+:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
+:103BB0000000000000000001CCCC0201CCCCCCCC39
+:103BC00000000000FFFFFFFF400000004000000079
+:103BD00040000000400000004000000040000000E5
+:103BE00040000000400000004000000040000000D5
+:103BF00040000000400000004000000040000000C5
+:103C000040000000400000004000000040000000B4
+:103C100040000000400000004000000040000000A4
+:103C20004000000040000000400000004000000094
+:103C30004000000040000000400000004000000084
+:103C40004000000040000000000E01B7011600D641
+:103C50000000FFFF000000000000FFFF0000000068
+:103C60000000FFFF000000000000FFFF0000000058
+:103C70000000FFFF000000000000FFFF0000000048
+:103C80000000FFFF000000000000FFFF0000000038
+:103C90000010000000000000007201BB012300F3CF
+:103CA0000000FFFF000000000000FFFF0000000018
+:103CB0000000FFFF000000000000FFFF0000000008
+:103CC0000000FFFF000000000000FFFF00000000F8
+:103CD0000000FFFF000000000000FFFF00000000E8
+:103CE0000010000000000000FFFFFFF3318FFFFF16
+:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
+:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
+:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
+:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
+:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
+:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
+:103D50000C30C305C30C30C3CF300014F3CF3CF399
+:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
+:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
+:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
+:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
+:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
+:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
+:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
+:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
+:103DE0000040CF3CCDCDCDCDFFFFFFF3310FFFFF26
+:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
+:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
+:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
+:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
+:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
+:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
+:103E50000C30C305C30C30C3CF300014F3CF3CF398
+:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
+:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
+:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
+:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
+:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
+:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
+:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
+:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
+:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
+:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
+:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
+:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
+:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
+:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
+:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
+:103F50000C30C305C30C30C3CF300014F3CF3CF397
+:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
+:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
+:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
+:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
+:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
+:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
+:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
+:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
+:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
+:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
+:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
+:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
+:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
+:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
+:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
+:104050000C30C305C30C30C3CF300014F3CF3CF396
+:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
+:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
+:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
+:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
+:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
+:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
+:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
+:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
+:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
+:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
+:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
+:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
+:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
+:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
+:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
+:104150000C30C305C30C30C3CF300014F3CF3CF395
+:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
+:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
+:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
+:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
+:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
+:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
+:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
+:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
+:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
+:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
+:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
+:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
+:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
+:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
+:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
+:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
+:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
+:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
+:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
+:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
+:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
+:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
+:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
+:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
+:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
+:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
+:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
+:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
+:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
+:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
+:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
+:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
+:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
+:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
+:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
+:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
+:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
+:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
+:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
+:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
+:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
+:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
+:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
+:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
+:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
+:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
+:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
+:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
+:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
+:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
+:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
+:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
+:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
+:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
+:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
+:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
+:1044E0000040CF3CCDCDCDCD000C0000000700C07A
+:1044F00000028130000B81580002021000010230DE
+:10450000000F024000010330000800000008008096
+:1045100000028100000B8128000201E0000102007E
+:104520000007021000020280000F0000000800F0E7
+:1045300000028170000B819800020250000102709D
+:10454000000B828000080338001000000008010002
+:1045500000028180000B81A80002026000018280BD
+:10456000000E82980008038000028000000B802863
+:10457000000200E0000101000000811000000118AD
+:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
+:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
+:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
+:1045B000CCCCCCCCCCCCCCCC00002000000000007B
+:1045C0001F8B080000000000000BFB51CFC0F00360
+:1045D0008A7BD81818367020F843015F646260B88F
+:1045E0000CC45781588099812198918121849178B8
+:1045F000FD49A208F62B210606316106866841A016
+:10460000B9C208F1A3403556220C0C7FA1628D403F
+:10461000369B2875DC3FD0789314A6D87A09047BA2
+:1046200033167964BC054D9E4F1295BF9580FE816F
+:10463000C68F1551F9620A103A1F2AFE044D5E1CFE
+:104640002A7F19EAAFA78AD8CDBD02950700C8E92D
+:10465000674460030000000000000000000000004C
+:104660001F8B080000000000000BED7D0B7854D577
+:10467000B5F03E73CE9C9949662627214F1E6112E4
+:1046800020828638BC0228BD4E0844AC5C0DF8423E
+:104690008B3ABC43DE50B4B4B55F2610224F6FF0A6
+:1046A00047452FD8E161458B3660A4D1021D4010EB
+:1046B0007BBDB7C1528BD5FA4554500C24728BD2B6
+:1046C0005B7BFDD75A7BEFCC39930960FFF6FEF791
+:1046D000BFDF1F3FBFC33E673FD65EAFBDD6DA6BBD
+:1046E000EFB1B334A60F64EC6BFCBB81B11A1B6352
+:1046F000F0AAFBF9949DDD5FEA662C6FA36FB93BCE
+:1047000015DEB7E6EC4AF43196B577BD3211DE67B7
+:104710006D6A5266E747DB8F76C1C731F0BE75BD63
+:104720005204EFB3DE6C5266E1D361636D509F6952
+:10473000BE24864F16602C9DB141E398F80BB8B3A8
+:104740000A19EB8FFF842ECE1B89D01963392B6C8D
+:10475000E19002EF8365539997B16D0057560AB403
+:1047600053BF3A60C7BAB5DAC97627634ECDA97D83
+:104770009DCB58F60C6663F01CB894BFC7BFAFE181
+:10478000FF9C90B53C8899CA3958F6A49E8221991D
+:104790008779BE56E3C1DBA5970E8FCE533E37D542
+:1047A000F9D2DD5ACFF7F2B978D127FAC3D0FA6936
+:1047B000AC3798B1704CFDAA90AEB16BE1090868B6
+:1047C000CEEFD97E2A2B2A443ADCC726D2B346F351
+:1047D000DD8578A9396A672180BBA6F65409965908
+:1047E000ABC286E4F46C3F9CD9891E454CD14EE1A6
+:1047F0007CBDCC8BF3532B7D4F94009EE726062681
+:1048000061BFEB1283F494EF33674FC90C023CC5D0
+:104810000BF2430CE87E7EA3E27740F3D34A58B70D
+:10482000033D2A6EAF2DB811EAFD560FDE8CED2A3E
+:1048300067B41D217AB0DA3CC4539BCEF967606B34
+:10484000D1A71AD00D582C9494827461ECA4890ECF
+:10485000F87772A828ABBDE3F172CFB9D88F86BDC7
+:104860008469BEF27D4EE8E8A0C131E3B14282879F
+:1048700031E471D6AEC4A3EBC0578A8E6A05BD8FF2
+:10488000F7F79F4788CB21E00EE95BE5D1C3CB80EA
+:10489000BEC52FDB2337003DAAB6286107946DFB08
+:1048A0005D01A4CFB9ED5006BA443C3AD53F6B3810
+:1048B000A95CE3687BE47A2877BDACB2ADD8EDD0D3
+:1048C000041BCADD29013B1B0D65C0C77C172F5691
+:1048D0006D39701FF657D6EA602EE8BFEA9505B726
+:1048E0005C0FE505C06F58A5EA997ABD2F9417862D
+:1048F00095662C774E64C41FA1143DFC0C8CD7E93F
+:104900006D4BBF03E4E54C9D93F90094E59EB6F42E
+:10491000DB818FCAC3BB4AB05DF94EC58F682F7E5D
+:10492000F999235938AFE780AF808F2A7624329FD8
+:10493000C41FFC7F0AA672037C5F0CF344F95FC0BE
+:104940009A4A988AE3AFD77D9E28BECED419344EBA
+:10495000B73C3D07E340BBEA17153F4EB1DAC682CC
+:104960002857E75E71CDD8E6C6F9D5EB791E9CD7FE
+:10497000C33AD65B109EB507555679788B5E02DF39
+:10498000CB376DD1E7E723DE40EFE5235C7DAC70EC
+:104990006D540388DFC5C9CEAD2AE087B90399D32A
+:1049A000E3F0CF993A506379D17239CA37E993B0BD
+:1049B0003ECD54BF4449267EADD8A1329F859F3855
+:1049C000FD43C738FD43FB3CE16772A2F45B6C70AA
+:1049D0003D29E9B73859D053EB2A8C07CF23480F2C
+:1049E00080A709F105CFB5023EEF0456A4015DBCD6
+:1049F000016628ECF2FCD96467B3188CFD169B178E
+:104A0000D0C64359678B989F3143AB0A4C82F2570B
+:104A1000ACF44D9C0F637E5F29E0B951613370DEC9
+:104A2000871158984F63964EF86B9A5CB84D5504B1
+:104A3000CCA9589EFF93D539D4FE38B5D7A0FDF048
+:104A4000DEDB1B25E32CED8D9232D9FE3DACC79CFD
+:104A5000976EDF54729D75FC9272D9FE231ADF7D2A
+:104A600069F88D1B2758C7BFB192DAD73838BDBA5D
+:104A7000929DE1AD506E70F9031AD24D63117CAF77
+:104A8000A5E46DC57AAAE407D61650A1BD7B67F2EE
+:104A9000C8D5CCCC1713FF88E379405ACC7C91342D
+:104AA0002EC1C28FC981144B197A324E5D13D54382
+:104AB00001AF93E0D1FBEAA42F8AFA3A09DE07F7A7
+:104AC000BBA8FCE0751CDE07FBBA49CE10069605B4
+:104AD000653D78AD615A8F004E856532764109BAE1
+:104AE0009431E6F73E1BBE4F50592DCE27C1C14829
+:104AF0001F3D9C53B82D64C2CFCA01405F28A72A2E
+:104B00003AC7A3C0EBC303E667CE328DD338409FCC
+:104B1000B1359FBF9FE3C6F14AD315D4837A579E20
+:104B2000E1EE398E23779C651C6776198D931333DC
+:104B30008E23BB2C661CE78CADE2BD1867D0A5C6E2
+:104B40007938F73AEB7CB2CB699C82D8F96497C785
+:104B50008C93C0E703EFC5387EC45FAFF31934C14F
+:104B60003A9F819534CEF538CE18D37C0656C68C44
+:104B7000E3A671F03D8E0386948F6500DD1D5DF325
+:104B800089FEBF7491BDA03B82CF62BFEC5D17234D
+:104B90007DE283713350AFC0E20CF2AB292934CEF1
+:104BA0001709407FB799CE5C1FD113F4CF3C012287
+:104BB0000B0344A07FAA058FCEDD392DBB1E9FAD10
+:104BC000C599B3D02ED9E0F10F01D139D75AACCF66
+:104BD0008963DFCC6BB29F6AB7F0AFD07B13D9D0BB
+:104BE0005A18BF05958DA97C0AF41703BD7512F4F8
+:104BF000173E4F0BFBF423D06F4C37C35B4FF3389A
+:104C0000A5713C9EDAC4D7912FD61FB383B187C359
+:104C10001CCF07B8EF14D398D704C69F49CE6A04B7
+:104C20003DBA5E7184B7123D02FD6CC0E76C631F34
+:104C3000C095A80776E61F843D0A7FFD6C60CBDE39
+:104C4000B372D761ACF6B6326BC06298EF8C96F552
+:104C5000F67E503E676FBFCFEF36F533C37E12E767
+:104C6000ED84FFB09FBB83768B7DFA9D326BF9DEBE
+:104C7000187BB552C915F410E3FAC276A4D79DE9A2
+:104C80001C9E7BF139123F1B44AFFB0CDE56C25316
+:104C9000F3433B8BD07AD49EC6F2111F696417058B
+:104CA000E5BA1203DF7D7667A014E879DFF755C215
+:104CB000632CBCEDFB130336B097DA37FEBB1DED5A
+:104CC000EFCBC17FFF52EB7716E2E349BC4A3EB817
+:104CD0006B46519F8F4CF5EE0EDED4E72313BF7C5D
+:104CE000A76C9AA57C6FEDDD96FAF72F9D65F93ECE
+:104CF0002BB4D0F27DCECA4596F2BCA6EF5BEA2F6C
+:104D0000D8586FF9BE30BCCAF2BD62C77A4BB9AA97
+:104D1000F9494BFD9AD62D96EFB6FDC36E45795CE9
+:104D2000FE5B95A17D76C17DEA11B4AF2E189A1F66
+:104D3000EB5423AF811C7E529749FC7DA6CE47CF12
+:104D400073ADA39C688FD724803CC35ABF5FF943DF
+:104D500068E504D423501F74F841E5C350089CA7AC
+:104D600037141FF1BDBA516711605585A574F375ED
+:104D7000971AFDAEB5C3F751BD7F57376A71BF6B48
+:104D8000ED5ADC7E3B95AE3CB4EF42EF3818DA8149
+:104D9000BDD90FF0D70FD78BDEBE77D85859B3499E
+:104DA000EF9C526CC407772A134FA17EAED4B9BCD6
+:104DB00057EECE9A88FE60A51EC9AB755F62BC66D1
+:104DC000002603FBC9A5792D0CF78BCA2FD16F9054
+:104DD00045EE97B0E0C7A89F3B0EA8A46759E450E2
+:104DE000F66DC371FCC0297CCF5AD3687D7CBB2E85
+:104DF000D0E723F0E74ED44DA1E7EFEB4AFB7C046C
+:104E0000BAE6BDBA19547EBF2E48CFF6BA327A9EA2
+:104E1000ACABA5EF1FD52DA5F2A9BA103D3FA95BFC
+:104E200049CF33754DF4BDA36E2395CFD585E9D910
+:104E3000ED07087B94A50AFB4FD8EBB07250F9BC84
+:104E400098830AFFE67EAB3F13E5FABCFB8B3CB4CC
+:104E500073CF9F00C3248E7F289FB1FCD63BFD02F9
+:104E6000B4DECF0F03FD47F5FCEE4AE0F471D9D86C
+:104E70001406FA67D5109D69307EC22FAF217B19C9
+:104E8000DE6B8CF465D83FCD13A77F9C73C6E5E934
+:104E9000D4CD1F4FFDB910E30F770A7D987048AD50
+:104EA000E574DBE647BA99F0C7EDB297853E8FC14E
+:104EB00023D972593DF179364DE2B32D1BE3001B26
+:104EC00094D26136E083F32D0E9AD7F9BD896186BD
+:104ED0006D313832FE5278E37054EC701966FD5033
+:104EE000D59C6C58F5459661D617E78F6EF3A2DC1A
+:104EF0002FCEB4191F8D42FE0808FEE07C27FBAFC1
+:104F00006ACE31DC967EACE5F34DCA14F48340B929
+:104F100027DD1EC73F90CFC599BAF111C8F7991D7B
+:104F20008392705CF0E30C1CA7A3CE30F8B899868E
+:104F3000992F2B9726507D095F6FFDFEADE143CB86
+:104F4000E0432723D47F3DE89BFBD94CFB23C5736B
+:104F5000D85EFB17B8EE38E0FFAF291EA05159F616
+:104F60005BD3AC861CD7E2FB9D96F1A09D4FFAD097
+:104F7000B85EF54E778D9D32C505AA710CF28F9CF7
+:104F800044E720F49804FD756AEE950A8C33C5E673
+:104F9000A3EF35821FAB9CED7A105E9D6DE1F4E8C6
+:104FA0006D9C3375477D1AE88F32277864304E59EF
+:104FB000F3B049A81FCFB62C4F0F02DF56A8E71F4A
+:104FC0002C8DD37EA54DE1F084ED5DEDA6F9C838BA
+:104FD0000A63D0AF330A3F72FA295339565FCBE7E1
+:104FE000A3D82FF047F5CE6325D703FCD5AD9FEBB3
+:104FF00008C7145BF0515B5A74FE0ACE1FFA29DF12
+:10500000F1818EF3FBC41ECAFBE125F4544F38DD59
+:105010009914B793F085581BDA31B3BBE38ABEBB52
+:10502000DE05D1FCF45FEC6C35C0C1BE825AF0DD08
+:105030002EBECE65A55EC4D7EC960A8A2F7E6A93F3
+:1050400076535321F2C759669B82F33BCBDEF28E37
+:1050500032E1AFC5C6ED7EB692DB3121F80FE1013A
+:105060007BD662D72CD8682DCF67D3D3516FCCDFD6
+:1050700060676140D142B48B247FC0BCB7DBB8BD50
+:10508000BB80D536A23DA739B87F30DB605A3F8060
+:10509000ABEAE79B0BD1EEFF85CD46F49171868597
+:1050A000291CEEF2D4B01E80EF1FB68CBAF37AE45E
+:1050B0003E47B811D76596C4FCCFB09EF89CB3D2DA
+:1050C0000ADFE5E08F8597B165163864BF120E756B
+:1050D000871208C7E1BB3724DF093D92A25AEDFCD5
+:1050E0008C98F27B3611BF54998A743E6B3843B664
+:1050F00024FAEE8F607C64B7C3BF1CE8FB80ADB4BC
+:105100001DF533D80505CC54EF015B90DE77286F91
+:10511000CE47FB94699102F4EF614DD1901F74C1A9
+:105120000F6A82B700E3B11E06EB27C8A503E1832F
+:105130007E1A3D65535901C65F414EA1BF75DE928F
+:10514000A30A945DEE1686FD3932ADF16597CF5A0C
+:10515000AEC17F201D86328AE3240EB57E87058B83
+:1051600021BF79FCD6F7FFD18DA708F1AD97581A6A
+:105170009E4E774485F1D938ADC36C37573B39FC27
+:10518000E49743FD25C29EAF66BE10C58933391F23
+:105190002CB9C946F02CF1F8FC21F8AE680186F272
+:1051A00087B16AF33A56731144AE8FA9AC75E9C85A
+:1051B0009735173516067D5F600B7AD43188BF00AE
+:1051C000D9B94E40D6D700B2E69E62B17B59FF14E2
+:1051D000B1BEF637CCF2DA1FE93C264A67A917ECD4
+:1051E000422F82BEC850D3500F7695905FC2DA49E5
+:1051F0004FC87A7AB45E7F84A3B77AAE68BD9C78D4
+:10520000FD55FDFC853D21C07FF9CF1EF302F1D98C
+:10521000A75A53BA1FDE573EB3C28B7CFC8916F2E5
+:10522000E2BC3F0DAB53E2F1F39DAA22FCB1805BDF
+:10523000417F58D0E9CCF36B6E41BC7FF18CDDC06F
+:105240002A353B1C110710B1BA6521E7A71D8E0F47
+:1052500078F9E1CF919E35AD56792B7FF6B1748CFC
+:10526000770286B8DFC822643F576FFFB804ED911C
+:105270001AD6457A22B61D8E7F3185D6AF597A521D
+:10528000CFEF72FFA546F07D4DCB9ACF552F96AD4F
+:10529000F25D26FC911B554F2AC595C6B2B1483721
+:1052A000890716E6F6F0F2E79E28F800E0E8D8FE57
+:1052B0002F5EC51237E2FAE17CF39C1FBFEAEB5D7B
+:1052C000AF9F13FE7CB45D98DAF95AB9FDCEF6F2C1
+:1052D00067A53DE2457FA9728BDD0F92C92A5FD891
+:1052E000F693A790AFDF71509CA1E285C36F5F0773
+:1052F000E58A5DF6D4A97C1A6E253D4A8F1AF87F9F
+:10530000E9C828FECB5F3AACFB86F3F70FA544E96A
+:1053100050B1EB80CE86F7C45B71F301BDDD1D8714
+:105320001ECD1F94A0BDBDFCB92F7594AB4FF72BBC
+:105330002C23A767FBB22D87C99E433C11FD047D3A
+:10534000BAE9D5834E915B5E1D4DF50C5CBF7AA327
+:10535000D3D5B8F6A5111FBFF82AC6EF7FEFF0E34B
+:10536000FCCB5EFCAE17E7715AABE5FCBC79457A25
+:1053700000C62DB387D20D7AF2F7654F3F407CB659
+:10538000E0D803E9140F60812C1BADA1A12C9CDF98
+:10539000BC4D77D0FCE6B320F15BD966B5348CF117
+:1053A0002C8D4DD915471EDE14F2707AAB03D71E33
+:1053B000761A152CFA876FA9B44FC0D8228A373CC9
+:1053C00020F721D8622A5F70723A6D536D32BEE1C8
+:1053D000B4F0E9F687DB903E67060432303E097888
+:1053E00008097C29A877D4639333387D984F2B1410
+:1053F000ED402F16E37BACDF660FB80A2CEDC43A04
+:10540000C6C75F22C607B813D01E3B9D0EF64D9C43
+:10541000F97DA94ABD0CF68689BF4C72CDE57CFBAF
+:105420002A2ED752CEC3D3A6E0F73F1EE7F283ED74
+:10543000705D07B82219F4FDC0ED0AE901078BC4BD
+:1054400093E7ED7621CFD6EF727F12E0D6707D8A9A
+:10545000F209F49F42F8273B6DFE066867D2CB3510
+:10546000381ED5D3A3EF4DEBFA0221FFAFAB627F1D
+:1054700054C83FDBC4E5BE77BB37C4FD037BF827C8
+:105480004FA1BC827CE23A53F982BD14E7FDD9CE2C
+:10549000436FDF037CFD59B39453ABDE8C95D3B2DD
+:1054A000DD63583C39FDCCED6771E514DEC79553DB
+:1054B000773BF1F1DF5B6F4ABC9D8BD19B520FF6BE
+:1054C00086BF583DB856F5C5D583F0779C15F6E4F0
+:1054D0003BC96F92CFCA7F5A3590E246921F25BFD3
+:1054E00075F3A3E4B7D8795AF116FBFD15A16F2423
+:1054F0009DEDCB58C883F1D27D2AF9D79D00532367
+:10550000D0B773674E18E3CE2B5C3C7ED1697479BB
+:1055100053E0B9229997BBD2F446D40FF27D978B12
+:10552000C7B73B4BBBBCC926BFE283BDAAD707DFC9
+:10553000DBC36C4A3C7F03342FC1D1CE7AFBCEE370
+:10554000C1935577F652F4DB9B54DACF9E5B7F977D
+:1055500017F7813BF70EFA27D44FF3DE000313E071
+:10556000ED443B3009A717D0302F618EA0F7272CD0
+:10557000F4F80498DF9CBDDC5F98BB36C6BE772F7D
+:10558000D151DF807D7FD21AD7E67C532EFA29DBFA
+:1055900064FD5ECED612DDCA63F82828FCC0B19A3D
+:1055A000E0A3116C84F0C378FC42E8ABC96AFE3F0B
+:1055B000A19DD17994C715CFEF5509FFE7772A61EF
+:1055C0008CFB507C773CD2BF4B67267FB903F94DEB
+:1055D000EF5D8E3B5EFE43E10FA14AE59E770BFE39
+:1055E000199E1D7BDEC9FB05967FFEBBEC7759CF6C
+:1055F000FAC5FBFF44FBC79DFB1D0447E7FED7B37D
+:105600007F88E5571D7E84B3739983F6CF42FB3DB7
+:10561000E121F87D00D01BD7CD7D5F16B4D3BAD37E
+:1056200040749AADF1FD8EF37BFFFCBE82F9077BDF
+:105630001D3E9C47CD7E9E1752F3AA8BE22E9DFB0A
+:10564000BE2C0CBAFF76F3A9D65990F8CFC366ECFE
+:10565000467E4DE6FB0035BF18BFAD1EF7C35B0E9F
+:10566000E8B8BF52FCCBBF14A07EE9DCCDED84735B
+:10567000F6F6A7711FB44A1BBCCC8E728F365B5FE7
+:10568000B03BEDF32686F2E3E185E3A113F080F36E
+:1056900002BC94A15EEC0D1F0D1AF737FFFBE1E38E
+:1056A000F3FB70FCCABD63496EA2785102FCBD27B2
+:1056B000EC5468FEFCFDFE2F0BD0EEF9ACB99ED683
+:1056C000F1CBCD7BDBFFB8792B912B99F7C1FFE6AE
+:1056D000FC3F45E3EB52AC1CF4E4F39F3F48E51775
+:1056E0003D7E82F70AE5FFE4FF34BAEF06BA7B2F6E
+:1056F0004F77C5FEDF75DE97A3FB1B82EE1E03F31B
+:105700000A3AF7FD85E2E572FE979BB7EFFFD17984
+:105710004BFB67B5CDDF940BF5D7B2489B0FE05C30
+:1057200031747A138699C04D288D678F94DAB97FCA
+:10573000A42A3C0EC306F0B81013FE04A580F9306D
+:105740008E329FEC3ACDDD487626D3FC6D01C0C782
+:10575000EAAB67FB2957838D3C11C472FF097E8A2F
+:105760006FC6F8550D0A0B2860EF69577FFB28DAE2
+:10577000F9F6A1B688A3809E1FE0F36111C7B21BA2
+:10578000BAC59F70C7F8032E9FF5BB43F4E76423A7
+:105790009B72314FC1AD196118DF5DD444F3710FB5
+:1057A00061ACC9B40FE860A6F6D05F3E06604DF666
+:1057B000E337C55F7D37FE46B605107FC36C14D74F
+:1057C000A2A43EC2873FBC9AFC4CEE3F46F1D9D81A
+:1057D0008678D418F87F7C7EE43732E12F6AA20BFA
+:1057E0006DA82DE0B2D6137ED165E9C3E9915D299C
+:1057F000E8B3D8420F89FF3874B1D043E2F79BD2A7
+:1058000025961EB178BFDDCEE36DB174B2E477A406
+:10581000713F24027EC8EB3BB751BCE3ECF31FDCC5
+:1058200082F52B7EA13227F4736EA78745507EB593
+:10583000B08EFE54798B1A37CE2BEDF28A9F7968A1
+:10584000BCF2DD8EF054685FBEE7C302B29B967572
+:105850001DE9877181E7154EBF507B01EEDB956B2B
+:10586000DC3F88ED6F939DC7053A5E499C81F10747
+:105870006507CF572C6FBECBEE30F1DBFFB2F3BC28
+:1058800057A847F21C7A4EA1F5A6277CDC2FE878B2
+:105890004EE1F0B5DAC398F758BE638B1E44BF7271
+:1058A000C7E714C72EFED90BDE76F21755ABFFBC47
+:1058B00043257AC293E817EBC756B754919F50DD42
+:1058C0002CFCC4183FAAE267FBF6840035152F3D77
+:1058D000EBC5F8CB99B667BCE49FEEE0FEA7E6D631
+:1058E000E2FBA797F34B9B57C5F54BCFE03FC09F1B
+:1058F00038608FF1E777F4B9B2FDCB172E3C8D718C
+:10590000D28EDD9F3D8D7057FEE7BF3F8DF63DDBAC
+:10591000EF329E81F9D63CFF5B8A37C976EF0A39B0
+:105920003D378085B2A0DEB9771C943F726EDFE907
+:105930006CF4E7CEEDFA533AFAF54BF64DCEC0795A
+:105940002F79B93883C59177F944BE0C5F419C30FB
+:10595000960E875A0E911F72F68483FCBEEEF842B3
+:1059600073158FD7F8445C6167FC38ACF487AB5B88
+:105970003E2CE1F131E1175F2E8E701CE878ED15B9
+:10598000D06BA78813C5D0EB2CFE03E8F2650CBDE5
+:105990002EB0E08FB3701FB2A54FAF7184C815E071
+:1059A00049C6778FD803361DE5607762379DA622FA
+:1059B0009D5EB8908DF1F04FEC5D64F774ED731857
+:1059C000E8DF97EFFB1DC9C5B9978F51FC94893863
+:1059D000EB39D6FDC7E3628A98DF760F8F3F087CEC
+:1059E000637CC2E7A5F7220EC1F955C6277A8B4B17
+:1059F0008CD545DE93883B576D7F576731711E65A7
+:105A00001CD2E9034B7C5CCE3BB63F03F130D61C85
+:105A10005F8B1FF7917E73944E3CAE26E367E7B62B
+:105A200088B81BBCEF3F12FD411EC7A8092BBF63FE
+:105A300071E450C6D746EA317218BEB2B8DAE5E072
+:105A4000FD6BF13144E7EB83C44BC757F1F5F03FF1
+:105A5000EA5CAEA7D8825375D37EF6FD629F45E21D
+:105A60004BC2DB21F2F03A9E57291ED4D87C88F431
+:105A700069AC3C57F7720EE23E9DC75BAB5B0F14FF
+:105A8000A0DEE938F80AF15DF5CE0FF410F4736486
+:105A9000C74B3AB727399FA39E0E9BF474C78B0759
+:105AA0000A78DC8FE7DDC6F65F21FAAFD96BEDBF70
+:105AB00066E7E796FE2B42CDB4FF75B971CE6881DB
+:105AC000BB70BE67DAEC0CF5DD9966754A389E1D31
+:105AD000A8DB2DFBA08DC7745AAF46BF9540F9B91E
+:105AE0004B8E4D793709F7E940CCD0FE6DA9E77CA4
+:105AF000D5F2A3403FA44BCBB17B545C37F6201EBC
+:105B00004D7670E1F1DA620FC86BE17BA5A391AD30
+:105B100062F5C0D813360BDC304E06EAE306E80720
+:105B2000F3E9317F08F747556FC9148447356C8610
+:105B30002BEEFAC9FBB3BB4B19DAE576C39AAF9CDF
+:105B4000395DC4D122D6BCF54C9D0DC57D70664B28
+:105B5000F0E37EC0E26181118731AF7E5E26C589A8
+:105B6000B36EE3EDCE1AEE90EDDAE8BE6DE245E8F5
+:105B70001FF3606CE1F533A15DA2D6ACE03E003CC2
+:105B800019D2E5015B70AB9E86F574E603D5F8B4D7
+:105B9000AE68947F21CEBDC8FE64BDDEF683E539D4
+:105BA0002455C03F48EC070F60ED0AEE076FF2F096
+:105BB000F34803DDA974DE689BB0DB7CB8EF8AF59F
+:105BC0006AADEBF665CF23ADB496538B8B160DF40F
+:105BD00033F661E383C51AE883D4BB8A76F5337064
+:105BE0005F7A4331E6DDA73E5B34220BCA77398604
+:105BF0004FA2EFBF2E1A910DE55AE7B849F4BD4206
+:105C0000A1BCC07D7A6771283F2A9F6960DC62BEB3
+:105C100005C8ED4194DBB3A51D8DF8B5EA8E2F7450
+:105C20007E1E8695E2FC078CE3F3EFEF7E6F17CEC6
+:105C300077A0ADBD1EF9EFC7FBBE4CC67A3E66D05D
+:105C40003C0DD660E0BE3CBC1AF7F525F27F62F34E
+:105C50006024BF6F4B0CFE06E158357BE81325A886
+:105C6000532BFDC447B1FBC4CC4825BACC157441B5
+:105C7000389DA63CE4056A88F25EF04402E5F5B082
+:105C800049068EA7842AD5AFAFF9E6709DD645BEEA
+:105C900081380F663A2F7506E15D9718A467EC7995
+:105CA000A9837A6907BECF9A7F311BE721CF4115BF
+:105CB0002F70537CE0FC5E1676C49123F9DC5AC742
+:105CC000D2B4C1BD7FFF8D23F81FD87FEE2F7DBBDF
+:105CD0008F427FD7CED5FD98C276EDD2D169DA2832
+:105CE000C627847685A05F26D214E5EC41C6CFE7AF
+:105CF000389400FA8F9DDF35480FF79F3B95FC8C59
+:105D0000CEC49C66CCA3E8FC21CF0780955E417988
+:105D100018B03729827E10F0F31731FCFC8575BD71
+:105D2000B18EDBF9B5AFB59DFA33447F60F0A4A323
+:105D3000FCF0BF4E95DBDB9D753E8203CCC303B800
+:105D4000AE5EE978590E110F17F401BCF77398F0A5
+:105D50003ED0D12BFD721D9C7EF48CA5DF7C676D3F
+:105D600036CA7379697309BAA8BFD5835761BDD3A1
+:105D7000F38F34DAA15ED5CCDA3C64F69E74E5E7A5
+:105D8000B1D2F7CEAAB763BC02E9E2EB49BF6B9789
+:105D9000FAD3B43E167A8E72403FD7EEFDDC8670A1
+:105DA0004B3A3E21F2FC63DBFF834311E356D6DB23
+:105DB000314ED2AA933D1B5B6F0A1EAA1A132D17F0
+:105DC000380B69DC0C1B8F77F4ACCFD7BF68BF4EA4
+:105DD0003A97D51B1F1618BC3FC0FBB7117E89F739
+:105DE0005B1C42DFF6C4FB34AC0778A7E715E0FD87
+:105DF000CE4BE15DDACF15421F54E0FE09F0CDC76E
+:105E000081E9E98361DC12D54D7CBFF01995E40D81
+:105E1000EA4FCD4A8FEA8F85E36B0FE03C176E5651
+:105E2000883FE78AF3A59F897CFED83CA8F93342D6
+:105E3000B4AFD3231F2A1CE3CFC5E4B95747F97485
+:105E400020CF4FE3E7B5542107C50BF293D00EDA0C
+:105E50006FF7FD9AECEB3754B6350EDE89B9D2A256
+:105E6000E501B5364B7E2C9B9B6CE977D2827CDAC0
+:105E7000EF5EECF15DD29F1AB8D4BA5EE784ACE76E
+:105E80008B06ADB49E2F1AD2D4D752FFAA8DB996E5
+:105E9000EFC3C2575BBE5FB363A4A53CBCF93A4BEA
+:105EA000FD6B5B275ACA2322DFB6D41F7574BAA5CF
+:105EB0003CA6ED1E4BFDB127665BBE8F6F2FB77CF6
+:105EC000BFFE93C596F2B7BA7E60B54F6C8CF421D5
+:105ED0004B50483FBE56372E1BF3B0D9686512E2CF
+:105EE000B358E411BEB648B7195E7CE6D90CD0535E
+:105EF00007E74DA5F5FEB545E9011F3D0B03E8CFCA
+:105F00003075C2E878799A938DF1D9E67CA862A7BA
+:105F1000DDA2CF261BD6F2CB926F0672BE79354634
+:105F20009FD96B2744C022647D170ECEC0F140BEBE
+:105F3000F609BDB6EF0AF5DA4194C3D3E991462CD0
+:105F40004BF962625D2D127C04CF808EF990933CF8
+:105F5000B4FE06F0A58FDE87349093894E7FFFC391
+:105F6000381F9B3F15996FD28CD2D7786EA5587F7A
+:105F7000D950DB37597FA57C67DA44BE5A0ACF5720
+:105F80007B725E5E1233E1F55D874DD8CD4DFC69C5
+:105F90001C7575E7A9E69ADF7F92A099F2E3940554
+:105FA00053293F24B3173DA867E6DEB41DF4AF9E26
+:105FB000E5A3A77CDF38C31637EFEB9CD09BD2BE9E
+:105FC0001A16B5AFCE211DCE66BEF538E62555CFE3
+:105FD000EC22FB2AD3D6B4E808CEEB57AA8857FAAE
+:105FE000F8792A6117CFBBE9D14547701FFA5F875F
+:105FF000905E92E36CAA9B7293663A37DEBF173FBE
+:10600000699893AF0F4FD70DBD692EE5691BFC7CD6
+:10601000A8E83F3B54558276F240915FFAB82D7E56
+:106020007E4B8293CF2B03498EF01A6E928FB3F37F
+:10603000DFF36A308FA76CC10427EED35EDB56C84E
+:10604000FDBC801FCF9D6647EE7D1CEB67676A94A1
+:10605000DF1A3B7EC6CCE0CA1C985F438ACDEFA610
+:10606000729782F51D0F31D607EA37FCA74AF03444
+:106070001C1C4FF91E0E772D43FB55CEEB50CA5317
+:10608000841FB52591D63D26F6C1657CF542E6DC38
+:1060900036B42B2E6CB0D37817608E06F47FA145F2
+:1060A000A57DD6232909111B94D5951E52A9D9681F
+:1060B0006B42FDF92D9EB02F278A176DE3043AFF3E
+:1060C000E2E8CFE7DF90E20EBB7368DE29386F09A4
+:1060D000A79CF7805EFCCA1B041EB3AEEA3E97C1C4
+:1060E000908F5543A37EE725F37397E1BA71825EE3
+:1060F000D6F934664EBFF56E3C2F745C65980AE2A3
+:106100006B6FA2F9CF87F9637C3716BF677D395F64
+:10611000D85482F3068453DD5842F3A07AD0AEEA15
+:10612000C70A7B2A07F9303885E8DAD746E70063E3
+:10613000E12E71F238EB8D4E1E0FD033F36EDADEA6
+:10614000079F83492E6E76F6BACEDFE2E47A889E08
+:10615000577E9F40C4B2CEAB011BD941B17081DEE6
+:10616000BADB69B26BD4A4870AB0DFDEEDB15D079C
+:1061700074B4C7DC8CEC64A92F7BB3C7D00E437E0C
+:106180009376D802A755EFC2FCCAC5FCCAE3CD2F4F
+:106190008E9EADC17AA7EF89C4B563D2F4F87A6850
+:1061A000B3C07F8DA1338A2BF5120F7FC229EDC1B9
+:1061B000BD0774C42BCC13F19A09FE7109E9197B50
+:1061C000DCBCEFCBF919B96BF2771FC5FEC08E4569
+:1061D000EE39DFE44B4AB9841D615FFA2B97198FC2
+:1061E0008FC4F007E06DBD93DB7FF4EC81B754C042
+:1061F0009BCD82B7C79D97B4FFB8BEED2BCE0F9C49
+:10620000137802BDFB7DECFFEC6DE7EE44DFB0EAF6
+:10621000B6AF845FCBEBA70BFD0C7EEF3F7CECA30E
+:10622000FA4B709CA8FFDB5E887ECFF297AF4A42A4
+:10623000FB69D29EBB0D7C9E4F1D4CEBCFD93D8E92
+:10624000008E733685E7D39DDD33F608C6073EAB77
+:106250003B9A6BD6CF675F3C5668877ECEEE3E5644
+:10626000A851FE6ED8628F577DFD9B423C2725F3D7
+:106270009EBBE9ECE47A7D838BC71DD2D2F546CC78
+:10628000E7EE4848A6793F966E7B245E3C05D51D17
+:10629000EDAB7B74DA475C3CCCB7DC8DF1941C83AE
+:1062A000F264972B81AC79B80F32CDE9C7387D6A9B
+:1062B0002E1B9A9384A1C62073030B395E6BA2E355
+:1062C000A0096DC6013463649C452BE6FAB1EB0E60
+:1062D0009DF2BA1235DF1333A19C3943A3F549C6A9
+:1062E0005DFE9C9042F0C9B84B373C6FD869DD58D1
+:1062F0009C136C2A82768BC7A7503BEFB4B789DE1C
+:106300009D3E5BC88EF3D1BA28FEF24F7543D3068B
+:10631000031E8D2CDB4D64837C05D832E5E77B358D
+:10632000164A027B640DF0EF60E0DF963A27D56FE6
+:10633000043BCE48A17B0CA2F77098F87E779D4174
+:10634000F57E529749ED1EADF3D1B37BDD67BC1DE1
+:1063500095E3E8C3BFD7735D1DBFEF4396FF7D3460
+:10636000D85540EFD4B14055C04BAA381F2EBF3F7F
+:1063700055F7C6A049830532009F7D2B8D2DAB2F8D
+:10638000016FAA239C8C478007BA58685226E6E121
+:10639000753D52928CE717EA274D1A0678C4FDE73F
+:1063A000EBC09570AD6D084D007EA8F4D5635C2EF2
+:1063B000AB5569C6F526AB757D11C6F9A11E9DEBDF
+:1063C00093FDBA5C5C3F251E7A52C91D8EC17FBE0B
+:1063D0006FCEF62586E39DFF1CEAE27A6AB068B7C5
+:1063E00046EC7B774D73D33D0989875CC42F597B7D
+:1063F000AFA1FD37772FFBBEB1FD241EFA13C5698F
+:10640000DD4AD301DC4764F3B8BD28F9A9B7765853
+:106410005FBF82FA9D7E8DE2B660A6D2FCCE4EEBC7
+:106420004FF8C6FAE67B3C3AF5F876D46817B753CE
+:1064300057D8E3EB6F8D71FB60745B17ED37E2BDEE
+:106440004A88EFACE34D0AFAD367159E2FD117F0B7
+:10645000B11BCA59139AE8DEA56DCEE0752E80EF08
+:106460008FC689BC15008E2BFFF7D9D84EE2432D7D
+:10647000D09DA84FB2F67EC0CFE1D8DA75CC4FFBE5
+:10648000CEAA17283EA8EAA539BC5CB702E3876903
+:10649000DED22DC8272CF4C2A4D7C0E7794C9C2BA0
+:1064A000C637A8F7D6B84439F47C4300F8648D9D0C
+:1064B00097BFB3EAB9063C77BCC65EBA10CF256376
+:1064C000B901FA5F93DC9C6983B2BBFED986A30352
+:1064D000B02CEB3F4B7C76A78B9FEF61EED22CC4A8
+:1064E0007B77D980F2705359E365E6E44F39BFAA50
+:1064F000437F3AD20FF8A57A2FBF87A61B6FADEB6B
+:10650000155C4F7E5277D4D7A0093991FA03D6E5AE
+:10651000AB3219F9157A5809E72A781FC7CA74737C
+:106520003EC9AD898A585FA0BD392E1873EE8C8E96
+:10653000B2E0FADAC0F33662E9FA46425143C218D1
+:106540003C2F1A5CADA21E7CC16E50DE7BBB467A2E
+:10655000BB43E6BDD7DAC97EAB14E750EDCB82ABC7
+:1065600087A15CDCABF9310E5091D35484F64BC556
+:106570002B39FE7A16CDA3AD486E4E1FE98EE6D1BB
+:10658000CAF2721137CA48AE4D4ECEC7FD92F5D948
+:10659000B89F51CD9AEEFB01C2FBA6CA90DF3F3DEA
+:1065A000303E09EF05AA8232C6A9AA5A8EE941A84F
+:1065B0005790C0EFA3A96E01BE71F37B6202798C84
+:1065C0006DD18C04D4F33F09D45E8D26EC13AEA3B9
+:1065D000935C40D767730306D2F9A5556F3538BF72
+:1065E0000565DD18C64660F99D06E4B38A1136CA12
+:1065F0008364A1775E0B0C16FBB1507EC89531D930
+:106600001C97CE12EB78CD26379DD78275F971E4B1
+:10661000EFEA8DB610EE6FD99C6D744EE725975C4E
+:10662000FFADE79B36285C1F86E6F138E7929B5268
+:10663000BE4DE79B56E41AA14BC45BCB2E26D03946
+:1066400026592E48F051FF655A88F679CA2E7AE904
+:10665000FCD3DF6E3CA7E53C55CFF1DC048F1CAFCB
+:10666000323A1ED1F5D0C85F3D3E18E8B66497DDDA
+:10667000E630F1DD925D62FFDC15C8C07ED2748E1B
+:106680006786FE1BF01ADD41C3CB210DD681755202
+:10669000BE431D0D932620DDA2DF9955FE03E83F82
+:1066A000AF4B90E50BF1EB27C4D4CF95FDFF85EA06
+:1066B000C7C29396102D3BA1BEF617477719E15B31
+:1066C0006F8BE92F4596F51593FA47F9EAA155DE48
+:1066D000C321E0AB75C94D45A8FFBBE6311FDE7392
+:1066E00085FCEA37E9DB875C5CCF965DCCB5D03BB7
+:1066F0008AF73C0B5D4ED7655AF62517CC5C42FBFA
+:10670000A70FA1B0603F2CC4CFC16CEAC7C2A6B826
+:10671000CDFF87E3AF85E3BA5EE0F887FF62387CA0
+:1067200096F1A2700CB6C0F7D7C2B1F5CEBC6FE738
+:106730004095C794903317D7851FF1BC35357992B2
+:10674000AF1EF74B7EA451DC7D08E3F928B91A3B54
+:10675000AA8D44F9690A60DC822DE3F60ABC5F6900
+:106760001F49EB10F90B83F63A66615E456E59607E
+:10677000213E59FF7CDA8F91FB984CC4F5E4FECBA7
+:10678000108315E1BD7C6F27CCA2752AB77466050E
+:10679000C6BF55CFE8045C0F1FB38543385EE85190
+:1067A0003E5E9A2DDCEC447BC93BD8C0F52ECDCBA8
+:1067B000F51F5B9D4FEBDF565BEED58B008E154AC8
+:1067C00051C21B88E7E45C8A63E37BBC0767AB5874
+:1067D000B7D464BF81EBD456B16E2D17FA5DBE4FAE
+:1067E0004C299D8576C4F2D545939DE3510F0556FE
+:1067F000F681F566D9EAA21599E371BDF1E53A6132
+:106800007D599650B4C20993D95AEFEB6B2447CB0C
+:1068100043FE02AB35E989A21568A734B81797A3E0
+:106820009D03DF0FA35FF86C8AD43BFC7BAED4538F
+:10683000A897408FA9F5DDE510EAA5DC6EBD5344AD
+:106840007A67FBD32A95CB603CB47B601E21BCBF2A
+:10685000AB6B8846FE910B604980B26B582EED6B96
+:10686000C1BC5902C6F587F1EF725F421F62A37D7A
+:1068700009AC8F787465F1FAFA347E9E59F7B8C97D
+:106880006F93FB1CAAD8574B1079248A318DCED92F
+:106890003AD78E5C8C7E9473B075FF588FC9375190
+:1068A00063F34FDC11B2BB1A12449CB90FCBA47B2B
+:1068B0000DC47BC6FC23F1997E774311DD77E76138
+:1068C00006E63B670623CC6C2FC9A703D6519F4928
+:1068D0006E1C6E168897EF704F22B787DD1735EE66
+:1068E000272A60DFE03AEA1176B8B08FECF21EA2F8
+:1068F000987557DA4B7671DFDD929B2666E0B921F9
+:10690000D51D70A29D73C01849FB292AF3DF5A6474
+:10691000B2771A2237513C5133020CED9CFDC2CEA6
+:10692000510D3F33DB398D75E080C35AB5AD308FE3
+:10693000EE9779CA15710E42FA3E66F3A3DE38343B
+:10694000B23CA4603C71292339DD56983E11F7030F
+:10695000B668A549F7A2BC1C87F17C9C6E7CFF79C8
+:10696000B982F1EF0BCED224D407EB9299C58F2ACE
+:106970004EE4FEC89309DCEE947E4223C013013836
+:10698000B48B57D37D3B43845DAACF9C44F12D4CFF
+:10699000D3C178A583D5860C77F43E3947A6CD922E
+:1069A0009FA85D2CA0F8DF930936CBFED1C3E23E51
+:1069B000405976B25A1EE7059E8EE7BFCD12703A57
+:1069C000C01EF2917D12B33FDFD33E227B45D2A79A
+:1069D000DB4E51F8B9CDDEECA39A8B368B9E8D9EA3
+:1069E00037D7492F9F13E7F9659E865BE8B3C6CC7E
+:1069F00060D3F539D1F3FB9AC8D7582BCEEDB34C01
+:106A0000ADCB7C4E3E11E331F0BD41E46D24C69C1C
+:106A1000BB77B99790BFE01AAA59CE69395990DA75
+:106A2000397CD6F75A66EC79FE50779E16E5156AE2
+:106A3000EC49850EEF737BB79FC8933A9BF87E2194
+:106A4000CA2FD8BB3F77D23E023FC729E359DFD4D4
+:106A50003EDE8F76D518F40BA78CC07EBF23D6A35D
+:106A60002C569AC537079B19E5F524F8DB19BF1397
+:106A70008CEC2D55EAB9D00B0DE847A599ED3B9369
+:106A8000BD3670CD0B0D0DDCEFA0F27756AD263D77
+:106A9000B8C225CB2BA80CEB5504FD1EB6C7E143AD
+:106AA0007E82F601941B76671ED9CB6A2EB8B4009D
+:106AB000F724BC9F10E3F97B1C5BD19E05BFF64E0B
+:106AC00097894FCF7A4E64B3FCB8FD852CFD657F66
+:106AD000B3FE60FC16CC0392DF2779374654DECE36
+:106AE00087ED58FFB6F743D0FF632F3BE8DE107900
+:106AF0000F722CBF162672BB01F58639DF529F3903
+:106B00003780CC29E5D3919960C9D396F2AA5D1C50
+:106B10004AF229DBED4FC8E1F77369018AAB6917C7
+:106B2000F349FE9F14746DAC332E334E4A2FE38C21
+:106B3000A47E7A1FA750E80926F6B334C37CCF4B56
+:106B40006FF21ABB7F17ABDFE453EAB7DDA2FF3B5E
+:106B500012ADF1E1F28DCD4790857E600BCE481CE1
+:106B6000837959EF797129AEB4450A50DE1EE8F9F0
+:106B7000BE1A27B7C0C5F727F2762C3A88EC3A3709
+:106B800031D884F6CC7D89226E9F09EB9A8AEB1668
+:106B9000CF2B5A87DF31FE1CF43D3119F5D4B412E6
+:106BA0008A3F6F4B2C7D1DDBAD9A5E48B10209F721
+:106BB0009A3A9E0F27F5A51BF105F51D5A2DE1CD3B
+:106BC000E10E44D0BE684CFCF564F4B1548DCB4169
+:106BD000E59ABD24074ECD4F7CE574DB7CB8BE3B07
+:106BE000C1BFC375AFDE6DA378D272BCA73707CF24
+:106BF000034C35505E177B7233D825F4A376315D94
+:106C0000E85FEBBD377FFB7152A97D8FFB750E8D61
+:106C10008F607F9A9F517E0B22E143935E95EB7AC2
+:106C20006CBBD8FE253E257E1D5A90F0AAA3DD1030
+:106C300007AECDDD7119AE0F33A4FE4C7E3B2F02A3
+:106C40006FAB94762FDA27A0173727A25E1CDEF5EC
+:106C50006F8A8FF4693AB76742F23E01CBFD453245
+:106C60002EAFBAB95D23E15FFCC6634EF33E512CF3
+:106C7000BCB1EBA53BDF9A47E1EC9F10739F6F3DE2
+:106C80001F472B25BEB14F0838514EEA8D9106DAC9
+:106C90002B0D9AEF7701CAFFB093DD0C76B8657CB7
+:106CA000F95C27EEEF3D2CECA8D8EF1E71DF71ECFC
+:106CB000FB8F05FED61DB89BF4706FF4C303CF485D
+:106CC0005F4F2E33F0FC8C5DC0EBBD4CBFBDF1D1EE
+:106CD0002307785C571BE70CA38B153B9E6A2F0D8F
+:106CE000E0792F7504237B571DC0C7075A1A181760
+:106CF000F68E4E61434DEBECAAC1D3F9FDCB69068C
+:106D00009DBF533DB6D27876A6C4536BA2CDB23F99
+:106D10009F29F966C8EF693FC9C4371FA17E89E57D
+:106D20009B56E4E1340E87999EAB06E766C4A34FF9
+:106D3000542F72BEBA1C5F144EE0FC9E01CF2D3062
+:106D40008F16719F4615E20AFC9DCABBDCCC80758C
+:106D5000ED2B4FD117085F61DB419EEFDE9246CEEF
+:106D60005FE584F8F2B2C8CDE9B2C8CDE3A84927FF
+:106D7000023FC57BC35BDA127C0A7C6A4989AFA7F4
+:106D80000BDC52CE44FE84D65E80F688AC5F38D3EE
+:106D90003A9ECFCDD7BF01B25DE8D614B4CBA66280
+:106DA0001780C7417E85E771B42686F17E7AB06A86
+:106DB000B5DB00AF3B84FFB703FCC269D06F7A023A
+:106DC0000BE2BCD3FA40399FDA0776B9A3FDBDC9FF
+:106DD00051C6260F2ADD8EFD4DCEC81AB13C87B7AD
+:106DE000C77E0E27B006E7C828DE6F7500CBA5E08A
+:106DF000F750DF45F9D1F7875176A15E7A7A7B812A
+:106E000082FB92B6403AAE231F1DFB01E5C12EC0A6
+:106E10007B8C9C78A5844A7E52E18952BAB7EC53A8
+:106E2000FC9885F71D950E738FC1FC30EB3DA46C6B
+:106E30003B3F3F23F1D5931FB8FE013843CE140BDF
+:106E40009C6C1CC2EDE4ED62F1DBFD147C2CE909C5
+:106E5000E8B9C623E88972DA22EEC5ECE61B71AF09
+:106E60004287B80F6A76A2B817CAE0FE95BCE7A4BD
+:106E7000450B24A27D3EBB3B3F2140E78F2A5D812D
+:106E8000A4F148B763DC7F3A5DC4EFA73B6D0F24E4
+:106E9000A1BC9E3EA62AF594DFC1F33E655EDD6986
+:106EA000BB6FCDD5F07DCE3FAB817AFA6CF50B3A56
+:106EB0005860D4BFA29FD4AAD23E64CEA3B3D4E17B
+:106EC000507F2E380CA88F6617BB4368C7B5FCBE31
+:106ED000F67D5CCFE63CEDF02D83715EDB38EA0B8E
+:106EE0002C9F5AEBF13928DE9AABE0FDF14BD6E747
+:106EF00018B40FB9948938F3C4926258839FC7A11C
+:106F0000E5FE8593EE9317DFAB1B27C1FCAE4E6BFE
+:106F1000B1212AFFB0B6BA11CFB3ADA82FCDC43876
+:106F2000C25AF7E4468C23A4A707DA6E80753DE2C7
+:106F3000BEB104CB2D4FC9FEA63462DCE017B660AB
+:106F40008E02DF4FBB679550FEF520D9FF92C60039
+:106F5000AC09B37F7CD51727305F7B5D6309DA0509
+:106F60004057615FAF21F8E64D90E526BD7830B41B
+:106F70004F649678AA3D1A97A0786D4BB77DBEA155
+:106F800004E3107326D6166BD07FE1BAA71AF3413B
+:106F9000C58E6D2A320250BE7EDDA6125CFF5A58A5
+:106FA000A002ED921BD63D5D8271F9D43ED6FE5310
+:106FB00055119767DB1AB1BFC29981110AB4FF97C7
+:106FC000752F35A21F9286F9B930DE05CF9F1A437F
+:106FD000FDA3FAF396E83D5AAB510EAA9CED47305B
+:106FE000549BBDB44BE779DB426FF4E7FCDC5D1EDC
+:106FF000DACEF3EB653993975B96C5D7438F7AB9B1
+:10700000BFD99210FFFBAB42EF4879493AC1023B2E
+:10701000E3C8CD16B7FBFF48EE5AFF6FE9B5E4CBE6
+:10702000E8B564A9D7043EF3AD7A1A8611FAFEEAF0
+:107030005CD40F0B30D9CA642F14B64DA775E47B0E
+:107040005E6E3F331F6F9F56CCF39DBA5E49E4F7E7
+:10705000A43ADBF2CCFBA2C7053E8A1F9EFA049D30
+:10706000776FB3333AA7B2ABE89279A69518DF35BC
+:10707000F91F955A84FCFA4A8CEF8EC2FEDEA47387
+:10708000A6D80F9E43C17D0C8CCFA62D8F4F7F6954
+:107090004F555E3458A84FCF7537DA7F2A0B8DBA1B
+:1070A000FCBCA2FD59E30F3DFBD3C57E50CCFAA832
+:1070B000C787F3CF924F01DF36137FCD13FC26F73E
+:1070C00095CFED19B6D5BC8F2FCF87817EFE29FED7
+:1070D0000E4608F43CDA99855AE066AC5FD89642D1
+:1070E000FB4C923F245F48BAB6A4D452DCAEEB49C5
+:1070F00085CEEBC5C265F3703A166EE4F73366CC05
+:107100000CAAE6FBE4A53C40FF2DA2FFD1E3487E9C
+:1071100036737900B9B917E517EFDBC179F8DB0BE6
+:10712000CCBF3B21E1AF405E4C233A72FCBFECA2E6
+:10713000FDFED875328AFFBE97A16736D153DA417A
+:1071400095BDAE975E9EBF7822E2F561FC08F91FFF
+:10715000F549F387747F5C4BABCA141F9F37EAADC8
+:10716000C26E7DFCF5E1891AD963D1F5C3477699E2
+:10717000D49F11A7335ABF6BCDD793719F3955DC7C
+:10718000CF9CAAE211EC281C233C5C8F8D0BC68F90
+:107190008716B83D9C0E621E4F2E9DC83E84F97F17
+:1071A0004FACF3E3DA43F4FB4976C4E398283EA4FA
+:1071B0003EBBD5D1FEA238F762E14759063BA7DABC
+:1071C00036C8F4DDCDF5AE1C0FE06DC0FB98D3E002
+:1071D0008957FF5FF0E4887D77CE9727F7646CA12D
+:1071E000DF6D18141881FA46F217AC2762BEB6FBA1
+:1071F000A7BB39FF4F8F4387E982CFE66DE4F36F7A
+:10720000F98FE29B910F5ADE4A495E66E2F77AA156
+:107210005764BF529E643BF97D86E8EF5E8F979E70
+:10722000F5027F0847BCFC0AD90EE74BFA7A25D74E
+:10723000D730EF10D209E61DC273F8173C4A0C5E36
+:10724000C5FA20F05DA5039E018F3BECA1BE98AF6F
+:1072500095A6F27C98CBC92FCC47FC8E8087F44E44
+:107260006CFF6B057F6C11F7E81EB6813CA39CB9DF
+:1072700039BCE7F66451BF75A2DEE5F5E195C9CFEB
+:107280001691AF02F0533E66D5ABFDB658E1AF178D
+:10729000F00797E339C2D427987F3923BC45105FA4
+:1072A000295EBE9EB4E841B2DFBA9E64E4B70E0127
+:1072B0003BC207E59A52F74825272AA779CD0AD17C
+:1072C000B17003ACD38837A7C4DB1B3BCDE36EF0B2
+:1072D000782CF710540AFA0F81F5FDA700EF10E89B
+:1072E000E745829BC375F2F1E6EB313ED7BDDE0B7D
+:1072F000BEE8096744EFC7E1A4BC0AB4777CA3A346
+:107300007062FF94E7E32E5D86FD56FF66773F735C
+:10731000BF2F76F73B7BA20BF5D87AD0ABA40E82B9
+:1073200087F01CC9DCBDC906DEF700FE820DFD42F8
+:1073300039EE5C4DFEEE4F7B21DE779ED73D0EE8A9
+:107340004F93FE3BE071F3FACE8303F11E6DA6F17D
+:10735000F529ADE9F48F701FA2B775F56FC50F4021
+:10736000479A77D72E98972F8ABF96E659CB5CA875
+:107370002F4F303FEA4B39AF2133DBBD987F53238A
+:10738000F428E0C5867C90FACF3EB6DC67D2CF8287
+:107390007E43199737E99F0CC50D1228BFE32910CA
+:1073A0007A8B519CE0E4ABFB7ECAEFEDE0F4AA9946
+:1073B000C9E92BE5F52B4F30C58BF6E95D0F4DE4A0
+:1073C00097E146E89EE6CA0D7C1CA8D7CC486EDB48
+:1073D000B26762FE25F2D3989E744B2D6D76517B79
+:1073E000C1FF675F191E463E4CBBBDAB18DF033FB4
+:1073F000103C2DCD9E30FACB642F63FB7D0A5FBF1E
+:107400005890F03277A6E137F38984AF9BEE0CE811
+:107410003E3CFA7EC84CDE6F4D2BF4CBFB21F9A924
+:10742000BC9FF1FBA9057D80D5428E9151BD03E53E
+:107430008823258A47893FD9BEFA7EFEDB3D182F77
+:10744000403FAF86B553DCB4522DED8FFE1ACB70A2
+:10745000D0395BF07F49FF1C7631CD05ED5F872782
+:10746000AEEF93D545741E6AF22085E41C2449C60C
+:10747000CBE8F7C66EBD2191E7BD7DF5DDC1389F34
+:10748000B444CE77D08F53F4E3243B55E8C35F6711
+:10749000833E34F9A5871585FA39FCAD6BB62E57B6
+:1074A000A2F3C4FED06E38AC4CEB4FF6AC886B0048
+:1074B000DE2CF97851FE0D09B8DAB3F1BBD94F4291
+:1074C000BFA6DBCF62490FDF087ED5D829CD11BC1E
+:1074D00052BB3E947CE3F760DCC9E067B960FEFD17
+:1074E000918FD12FC809A95E846B8842F7471F4945
+:1074F00008E6F37B88F938E922EE952EF2B4D19EA6
+:10750000C7E7362F5F2F8627F1F5E5A1245E4EF7FA
+:10751000C68F933D21BED7887BBB5717C5CF071CAD
+:10752000E7B5C6396F15FB3EE06F8DF3A6F1FBE0C2
+:10753000799E32DF2702BB96F05BFCF04CDAF7BC99
+:10754000D0764712BF9F82CBFFC74AE0DFEE52F0F2
+:10755000594AF703867EAB52BEFF4746C08BF9619E
+:107560005509F1F3CFEF15705489F99FAEE3F74950
+:10757000CCC3FD48D017B70AFF6C41D36D2548EF47
+:1075800005E0BFE37EA4CC7B90F42DDBA45AF62368
+:10759000E6E17E649FBFC67FF0F7E23F8CB6F80F4E
+:1075A00072DC583FE2645DA665DF6476D320718F9C
+:1075B00007AF3F87F909EE392BFB59F64FD9CAB40B
+:1075C0002BBBE714FC86505CF874D2AFF2FDC93ACD
+:1075D000270B99E1F86430E58D8CF3061FF05AE033
+:1075E000486421331C6C02FF5D2F178F5B03DD4362
+:1075F000667B3A16AE55DEBFD64FCBED05CF79FF91
+:10760000257E5AE104AECFF05222CC81193BC96AE3
+:10761000376FF6F27572B337D16237CF9D69ADB768
+:1076200045D4DB22EA5DCEFF37DBCBCA20D41BBCBE
+:107630003FF97B3C3967DEA2BCD3F7BCDC0E389E39
+:1076400014D881F2B856E4E96FF9CBA1CC39685F60
+:10765000FCAB9DF2048A362F598E79D4EE66C5A014
+:10766000734AAD563EFAC7A5CD03E7023E5E1274DB
+:10767000AAF4F37954FA23FA6037E675F3F1FB378D
+:107680001F5034939EE85FC6EBEDF3DA2D71F703DC
+:107690005E7E8FC42FBD323E183E70532AD60F68CF
+:1076A000B8AEF4C5DFC10178FAD6323A07D57734DF
+:1076B000B7C7FE71F416057F974BCE73A56D5ABE02
+:1076C00001ED56A627FA514F671BC1D7719E95EF62
+:1076D000452218BE19FB5E9B86FE92DF081C457E84
+:1076E00095F3F2A9465F5C6F12DFE3F03575C721B1
+:1076F000B89E666C8DF05FB6723B56654719B773DE
+:1077000069BF367DD9505A2FE47CD25384BE4D6771
+:10771000C1DD646FB395B4DE39F9FA99BE8CFF8E82
+:107720009EA467347E326C24C64F06AD8D68B3A12B
+:10773000DDAB9B6C71EFDD3825F00EF3F800E71739
+:107740004B9F5ED71D51CFDE4B5C4AF27BE294F833
+:10775000FE1E638FD0F7A2CDA9F7905C36E8744F78
+:10776000A2C4BFDF28FD23C2D3B7798B82B83929E1
+:10777000F2194EAEFEA982F6D6771732438DC34F6B
+:10778000DDF2BA74F7C0B9267D03FD133DB6C4E43B
+:10779000A74BFFC49DC4F5F83CA3544D4AA37C619C
+:1077A0008AE32DDCCE7F8FA3577C5C21BE9432EE22
+:1077B000C754CEE0BF475AB459237A5734F0DF2379
+:1077C000ACDCB98BCEE3B187981FE5BDB2799732B7
+:1077D00017C6ADD8B94B9967C25FBFCA30E5755FB0
+:1077E000E59171EA08DD3B16CBD718DFC7F5FD88B8
+:1077F0008BCB7B47913B8471EB0E7BB012EB7564B6
+:1078000025FA717F54E2FBF55D37D2FD079EDD8ED0
+:10781000083E57DAB6663AA1DECAAB753FF291DF91
+:10782000080E45BCA468A52DD83E39D5E3C7B8B726
+:10783000CFC146D23A778578181BC30F631FE27217
+:10784000724F9257DA59946F3531C923ED0ED24FEA
+:1078500047EC7C1EBB1987779B373016E16147F9EF
+:10786000EF29F4AD8C2898A7123B6E949F02DF4A53
+:10787000FA06FC0DF6928E7ABD42E899A2CDDB9510
+:107880000F4D704F456304F973E71605E32AF09D29
+:10789000F40CD467980FD577278F2755C0F7792632
+:1078A000BD22E71147BFDC86F0B9DF6B7B8DEB971C
+:1078B000088F230B7863E9797F12B7DB4A6059A5FB
+:1078C000F77A6828FA9B477213A83F29EFB1F2793B
+:1078D000BFE0F3BE9BB62B3637C5DBC9FE92F0C9BD
+:1078E0007AC79326CE491A837868233C546DD268B0
+:1078F0003E93F5D2C18B4CF2B048F477F0AEF7E985
+:107900005EA00D3F3F46FC58D5A470BBBFE9987EF2
+:1079100007AE2BA1E754DC1FB9992FE5EC71715F1D
+:10792000D6CD2D5CFF56B5ECD2F07E49C9A739679C
+:107930000ED23D5B55CD0E86FBA5C07FDF43FCC458
+:10794000F2A9C48FD4AFBDD113F4103FA710D24514
+:107950009C3A9833DD13D5CFDBBC627FD4CDDF6F8B
+:1079600048E2E528FF04572559F4AB8BE422E7CC25
+:10797000C883980F5AE557E85C656AB1F87D321301
+:107980005CE6F331B1FA11E3E13C7ED29E3DDD7459
+:107990003EAE5BCF8BF64F20BDF9FB087FCF7271F7
+:1079A000BD96F0C7D2EF90B0C7E3F0593829CE3A70
+:1079B00026D7F59CA7776B788F92E49F9B91EE2654
+:1079C000FEF95912BF8FF767491AF5FF7811DFA743
+:1079D0007ADCCED7AFC7EB9D94BFF9FADD3C9FCCE4
+:1079E000738F1EC1E761DBEC4AFC7EB82F8763A56D
+:1079F0006D199DF703B96C4E22FEF132AE1FB93EF0
+:107A0000DCF012D767952137DD775A19BC7D2EE55A
+:107A1000D9A6BAFC743F68F035FD0E4F4FBEF2EDAB
+:107A20003E40BF8B7C7333973F4907D0A7C45F525A
+:107A30001E245EA3F8E47897F224E9B14DEE0B0022
+:107A4000BF70FB88FB23F94CA5FD9F3267E0089EC1
+:107A5000CB2C13FBA5F9E2775FE47EE96C4197023A
+:107A60005BE9AF719E3DF64BAFD0AEAE58FAAB615D
+:107A7000180F29CF3C4A4F29B7E0F759E4FB7D4165
+:107A8000F7C3E2F9B1E09B8AD1CD2497151FD592B7
+:107A90003CBBA770BDE67ECFAA8F195B27E6BB96DD
+:107AA000DA4F4E6C2EC1FDC6C93F560CF4877B835E
+:107AB00073019E5343FF68D321EF2CC4AFF87D2997
+:107AC000799EE70BA1273A76A8E2F7366BF54BD9FA
+:107AD000DF97EB8F458E2B74EF89F0A93A76168FDE
+:107AE000FF18FDBA1D49F4FB279FEDBCEDFB1FA756
+:107AF000E2EF8BDCE0473B21757929F14F579ACBB8
+:107B0000BF95C73DA7605CA7BEF99017CFFFFC6F7C
+:107B10005968C8A800800000000000001F8B080002
+:107B200000000000000BD57D097854D5D9F0B97359
+:107B3000670B994966267BC832091050499884849E
+:107B40007D9924844516270805641BF600D958DA68
+:107B500062A57F068388886D68AD225ABF01C16225
+:107B6000B53560A441020EB208553F470A165BB412
+:107B70002322B284648AADA55FF93EFEF3BEE79C82
+:107B8000CCDC9B09A85FDBE7FFC3E3733CF7DC7B3E
+:107B900096F7BCFBFB9E33975FEE5760B01362B65F
+:107BA00068084920E4CA6BF21AAF8990877FF1EA2E
+:107BB00088A185842CF74A71064248EBEEFFF89FB6
+:107BC000D478422A76D658245AAF7FF94D7D80BEAC
+:107BD000A7F16E67CF77C75AE0BDCB2F6C1941FA7A
+:107BE000D2F6C67A6CBFF2C276ACBFF58B570FFDEA
+:107BF000177DAFD215E380F7AEBC76580FCF2BDDE3
+:107C00005A67232D89FBA87EAA99969E976492486D
+:107C1000C878C2FE9EDA73586FCFA5F5463A2AFDA2
+:107C20009E4CD77B7B65D1EF1AF7681798E00D2F34
+:107C3000214574DC5FCC1DEC867A335D444AE8F95B
+:107C4000463DF1186DB4EC4648142DAF169B3C52DE
+:107C50002C5D5789692394577F15351DD65BAD0F71
+:107C6000E458613E7D8913EADD011E4530CE0A5D90
+:107C7000B509BFC77E3ED41102652EF1908B7DE819
+:107C8000FA09D979AB3F8CF76B841F7D6F50540193
+:107C900021D3667D2AC17CA2FBD6EA96E33C5F66CF
+:107CA000ED74D5E1ED0356D3F1E8B8B7E06F64A801
+:107CB0002CB298F07D0A102C539BCAD3ECB0FE78FE
+:107CC0008303D62FD6975AE1AE37D3E7F7AE763B8C
+:107CD00064BA8F6F5C3A35BA3BADFFA28FD45F8632
+:107CE000D76569AE8BF65FED31E138556B4AC867F1
+:107CF00074BE636017E9F78916123F84AEA74C4B38
+:107D0000E24D5012725A5700FDEFC276BB8138091E
+:107D1000C503FB9BD376ADA39F3CA573A714413F3E
+:107D20001BFD7A3B943BD9FCE9F7165301F6671922
+:107D300002DF1BC94AF8AE7DDD84F84D12F6EBD7A1
+:107D4000D942F3262498313597F55708701AEB99E4
+:107D50000EEF13BB1ED777055EC17DF4E4CDCE8553
+:107D6000F209365F0D7103BE24EA69897075679563
+:107D700053BC596429765B8A42656237D6AE86EB7E
+:107D80004E68A7F0BC6071624976C71132B8F37BC8
+:107D9000A214F07F6B5A9B3E40C77DF2C0A788B704
+:107DA000D580B730BEFB821ED621F076217C42F70B
+:107DB000E1A9FD9F22DE2E6C96103ED5CDC5FA05B9
+:107DC000B4BC5AE7249F69699DE3DF53526031E0F8
+:107DD000B5677F94651785539BC0CF864F2FCAF434
+:107DE0007976738A5D82E7FB199E1ED3683C00A7F3
+:107DF000633BEED95E2F85CF731DC247AA2048276B
+:107E0000D5B5C46BA0EDC53F5F7D6A1CAD5755105D
+:107E100007D079B50A8FB29E3FBF01F0C55A490A13
+:107E2000A3ECB0CE4F4677A7FD57579222A0D3D4EC
+:107E300051CEFD5027CD12E905F50AD74218FFDED5
+:107E4000F8A50E99F66F1DE56A82F1EE8D1FEE9092
+:107E5000697F4FA5376E30D2764F19B1EC0238E802
+:107E60001A4AB4B4FE5499DD422149E1B63319DA15
+:107E7000491FBD6317E0B17B6125F4579D3CD301D9
+:107E800078D289FEF7AFEB03F3ADB6777344D1F741
+:107E9000C7374B8857C4632230FF6A0A5FA88FF741
+:107EA0000EF5C27CAE71F80938B6E9FC73607E6DE0
+:107EB000AF1B8887B68F1FC5F0D53AAA11F9C7DB6B
+:107EC000FBC79C90F2427869DE67F041DDA6B548B9
+:107ED0000EE04BE47E03CC67019F4F838ECC75D1BF
+:107EE000EFAC63593F3D364BC82F7E0DF49400A58F
+:107EF00086977A8EE70DACB478F25C141FAEF1FD74
+:107F00004734A1FD2EE7F852B5D087F454F90AEBB7
+:107F10002FDEE0CC5F1586BFF1A504E978771499D0
+:107F20005B4E9FEFB6B2528DAFA7395D673DBF1272
+:107F3000F77D01DD77D8D7D4CDF439C08DE205C007
+:107F40008DEE23E2C1BDF14B70DF166C961EC07D35
+:107F5000F40C20504F8863EB54F77F96F3C5DD5146
+:107F6000AE4289F6174C303B7648301FA7260AEA06
+:107F7000F956C70E02DFBB76C2780949518EFA3036
+:107F80007E4588AB5043C7B9946866FBED7D5F3B87
+:107F90003917E8D18EED0932F111E43F24DB951B4E
+:107FA000FAAEAC07EBAF8CF737A1C19347B2193CDF
+:107FB000102E1C1EDE75DDA687F3D34F383CBC7730
+:107FC00091E9C0378EE989C908FD5BE838B4BFC4C0
+:107FD0001D435FD884F3ABC77D7BDB62C1B22CCE7F
+:107FE00055580B2CB8876B35C045AC530D8F451CCD
+:107FF0001E6F4D9B93AF013C9E627200DD3D794048
+:108000009A8F78ED3152A204BC677448E87E005D17
+:1080100010B716F7A3BAD6E58D8CF7E54867D5F10A
+:10802000518E2809F1DE89F2CF63F232BC67F22F5C
+:108030007A2C9357C027CB733BF303C16740BE0133
+:108040003E0BBAA81E11C881FDFDBA7CA54DC7E83C
+:10805000BC8DC201E848D08DF90D462F9BD6D98B37
+:10806000A17D13A5FBF0FD3EAEF720FD1ECFEEE691
+:10807000807E619E2E7388BF67585C362B8577B5EE
+:10808000C6B7419B15E2C7D56F3C96E38E807F82D1
+:108090001F1BB58CCF19BDD15ED62F1BCF48C16D2C
+:1080A0002EC0D203F2287A0D838FBA9F5E56215FCD
+:1080B0008D960B548E4FA29B14DB8390B11A772FB1
+:1080C0002BEDA7CA18384E779664AC09EA611E8971
+:1080D00020BB807E76447B816F252612F7DE08FD6B
+:1080E0002659191F10FBD26063749418C3DE2FB693
+:1080F00032FE50686578792F2FC5FC05FEDB35EE22
+:108100004F89DCB51C13DFD17961BB980FFD7E234D
+:1081100061F217E79BF870CE8E4D61FB11A2A3BBF5
+:108120000A609F7A6CF669E79B42E30879AADE7FD2
+:10813000983FD00FACA7BC6FD7EF351C66F4A8C62C
+:10814000C772CE1763AD84BDA7F3FD15E96A8599A3
+:10815000EC80F96D25CE383AAF9A43BD193D38838E
+:1081600039D0FF119BFB15D88F81A3389ED3E7939D
+:10817000E9F3E55AE231D03D59BE5BE70D1819CD60
+:10818000DCA2FF95D858FFED66A347A6787EC6E629
+:1081900076037E794A88C30772E907947F00FD1150
+:1081A0005F11F0971A1288013857CBFE1C42F77FF7
+:1081B000B0C9BD08C63BAFF167C073420288AFE7E4
+:1081C000A262F208EDAF49EF4BFF3ECCFBA44C7628
+:1081D000D07EAE13E77858C775BFC6E6A1EBF8B8F6
+:1081E000F977BF3A40BF9A7DE0DAEC87004A9BA25C
+:1081F000E73C4BCB59468D51DB3F048F73E6C8FCFF
+:10820000F5871C7F12EA99DE155C67F0027CD4EFDB
+:108210004DB0B1FDAFB9914A3C71E1CF191FADD15D
+:1082200006F5A042D6DCC8201E3AEEC71A52D11875
+:1082300041CF0C5819FF6AA2A81FA9FD738E67BB16
+:108240007524672BCC673BE583003FAD1DF945C521
+:108250004FB31C9B68B5293B781CF488E0CF24E41D
+:10826000FFE7748CEFD0BF29C60121F909EA09E8BC
+:108270008715168F4F43F946C56AB34FCEC3E7DA69
+:1082800061B0771E8B16F8E07C2E1717D4BEFD77F1
+:108290002986B66B897118FDEE0BD3C218100B8BB3
+:1082A000BFBB2A1194EFA4590D489F848CB2803E25
+:1082B0002E3927C8B7A26FA7CF69516F477CA1FBA2
+:1082C000EBB2B95E80FD9E15CBE03D6B55B4D71384
+:1082D000C6FFA671F8A8F16C37E0289DEF2712932E
+:1082E0002BEA715EB595DC07789714E3FA35F6BF93
+:1082F000EA9A829FB54981179F057C5C6176EC62A2
+:10830000DD66B8C2E8E51D31EE0D0DEE5F7BBE3FC8
+:10831000674D16E07D30E3F714CECB5B0C168F1D56
+:10832000DAF58AFD3F5F47195F4EA83EFF52CFD175
+:10833000C404F0776C007C58B0319A78FA84D60186
+:108340000A37E077F50D82FDCC6F79FB2CF0F36AEC
+:108350006D00F167BED184FB537D438BF3201B7509
+:10836000AD01F13D95BFFD629C2791BE1E1D66BD0E
+:10837000780F7D98449FE3FADDEFC3BA9F8E8E217C
+:108380004E462FDEDE74FED78DF6581B85578D9E28
+:10839000E2473FECC6650CD3AF489A59B9FF2D2789
+:1083A000FF0EF3596874EB41DE2F9A5EAB07BA9C5F
+:1083B00015EB2BB2F40DDFF761F2AD7BBEFEBE37DD
+:1083C000713EF4B19ED245043AFC9CC37F02E02486
+:1083D0005DDFC7A98C7E3ECE20157BA1BC9B96F4A9
+:1083E000BB8FB379BD80D5D5FD44D9183D7F9CC7DF
+:1083F000E4956725931FEAF7FEC1C773D99C5F0216
+:108400003CC573A78D3D7FD5E6FC0A9E537EF85F81
+:108410001C5F7D56DADFAC370D88AF647D3007F620
+:10842000B1635D397CBE8991E7956163FC98F62B59
+:10843000D98AF03D27EAED87A2BC60879009943F76
+:10844000033F5E994E801FD371A36CAC5F9F15DF15
+:1084500033E03AC846CAA729DEB617D9715F361588
+:1084600053FC043E71D060013E21F049E0911A7F37
+:10847000126D42FE31397C1FC86119E570A28DC9A9
+:10848000613DD039ED51CFF4C19EB8DF8867F2D796
+:10849000DFEF3D46B68F94DEED3694FBBEDC707A9E
+:1084A0001370167CF2E36E4ABCD8CDF9601F0EB78C
+:1084B0000E38DBD87BF13D98DC13F6C120BEAE57F9
+:1084C000383F17A5906303C72AF59257B85EF08A24
+:1084D0003546EC4B21AC5FC8BF4EFBFD1CDB6FFA91
+:1084E000DE6058CF2C43704E1C955FDFA17A91BEA1
+:1084F00000BF6B82EF3AF9294631B95BB3D24C40E9
+:108500002F28B55918FC0B8319D01FE913443E34AA
+:108510009F507E23DD79FFC02790426964690C93E8
+:108520003B924C07049AE943ECD01F85F7245B513A
+:1085300008DEEAF1CE4113D503A7DB242DEE573E2A
+:10854000C987FD9AF3C197E6D9B4CB6B16A347430D
+:10855000E5C87735EE59D04FEB832751EF3FA7F7AA
+:10856000E5349822B4EB7DCF3F2D85DAE7BE247B3E
+:10857000F494CF34F95B7F368DE2E57CBFEC80214B
+:10858000E7AFFDEB7B03419FF6EB1C60D7527D62AA
+:10859000B316E65DCBF4CF731AE5FE5FFD1EDB5F1D
+:1085A000517F90E30BD5B3B46440885F093D6129E6
+:1085B000F1F5027D620171EAA13CBF62C90442E1AA
+:1085C000B7C8B41AF9D8E595E3507F5E4C3CD8BEE5
+:1085D00060A3EE7CB87C59D4A0AC2FD9AAAC2FF5FF
+:1085E0002AEB42FF4A288DAC57BCC8F9D0552A2E39
+:1085F0006EA7576CE1785BFAE884A791FEFD3A62BA
+:10860000A0EFAD3E589C4422F42BCA9A1BD9C41B40
+:10861000268742FA470EF1F687FE6EA23FF079AE4A
+:108620009F407F60EFAE8E7226815D72B524F2BCF2
+:10863000B7F179D7DCE8A6E8FFF94E7A4E0C8E53F5
+:1086400073C38865E77998F0FBAB8B238FB3BB438B
+:108650009FB228E469E8FB7826FFB83D2FF0A1E639
+:1086600046323E1775A16787BE4BC3FEA860B35C58
+:108670008C0EF1235D37360F81FF9F49C49882FE2F
+:10868000B12DDC2E71E4819EFB19E851407F63EC33
+:108690008702748A0B1E1A9CA3CD0ED1877A1D14F3
+:1086A0008FAE04C2E4FB219B391EE5B28338605CC7
+:1086B00081DF731E2C8B75D3F9FE696D6992BB6FD8
+:1086C00038DFF4E0F8D57AA1BF9914F298A8E4F560
+:1086D00082E693A89F2D34BA7280C97C7EF041C493
+:1086E000EFC5C4950878DD7EB07786FB7F21A7C5EE
+:1086F0007CEEF7CCD3317D9C122DA5B7C97C3EF71B
+:10870000B730FD506374EA701C27B15B12D1E46688
+:10871000F3A5CC524BEBC33BE60FCE434286F1F9B7
+:108720004BF03D85EF705E92F9EE6498B701C6A5F7
+:10873000E345116F3294F5831D7628474A2E2D9B11
+:1087400007DBE7D1A4360DDED71803325B279D4146
+:10875000227CDF012FAC9B797DFD94EB7316C173F6
+:108760009319F9869ECFE316F03F23F21323ACDB77
+:1087700060F25D86759979E92961FAB6279B38EA36
+:10878000E96BDD482381714DA66B1E58AC855824DA
+:10879000A84759AEFBC0EEB866317934FD902FCAB8
+:1087A00071147EADD2BB8B615F281F667EA8AEDAE6
+:1087B000B53EB477045FB3F1F9D573BE9642181C89
+:1087C000E289EBB093F2859F98174F2031208EDD20
+:1087D00038FE3331634FC07C01F028AFC76ACF87C2
+:1087E000CB8B049756C1B792A62BEB296E65DD485B
+:1087F000CE59007F259F2BF9561CDA717DC02FA31F
+:10880000E3FC624A37362F813FD9711A853EE1E297
+:10881000767DB54D4FD01F986834927EA85F64C7AF
+:1088200031FDE213BAD3D4FE0B221FCE1FE9ECF5C3
+:10883000330AE70D1FC88E87E93E6D30DBD76941EB
+:108840006F9B21313D5DDBE8033FCFF63956C726EC
+:10885000688F72FEF8BFA1FD039980DE5403FE7598
+:10886000A4774B317CB73DC382EFC59706D12F1A51
+:108870007C8CA05ED4094F6FD2F95378BF00750A83
+:10888000DF9A8596E5AFD0F7535CD10E29AC7D27F2
+:10889000B4D3794A1C2FE0F9C80160C7B2BF1E2DBE
+:1088A000F97E27F8299C32CAB59A96FC23263A8F7E
+:1088B0001EEE7C07A06DCF161E47893778591C81A4
+:1088C000522D9DC754239B474D4BF17D45B4BDA709
+:1088D000BF3F817842F409FBCC4A68D250FB19BEF5
+:1088E0002B8946FFD569EE47229C1F0C54D1DBD063
+:1088F00010FE637BBEA853F1EF1CC0DC13588F67DA
+:1089000074E020E28FD1E71012FA83EF4B43FD2190
+:108910003F1A156A0ED11B5D5A81D1515F49DF3B69
+:10892000563E06F1B006EC27BA1F03B5BEC340DFC2
+:10893000437999CF4B32BF01E1B9699D5306B8170E
+:1089400011B7BC85D60719FD71400FC38C8175091D
+:10895000B4BFC1D3E72543FD20285945A86779C096
+:108960003F6F3569BCEB7013F31D4037D3A6333F1F
+:10897000EBD4E9462FF8EDA76A098B6F69DD59DF63
+:10898000A1EDDF99C5FCBB509F15E63F11F18CD3DB
+:10899000D41ED913C19E3C18C7E493F8BE66BD5ED1
+:1089A0001137DA1F67C2F6FF881BBD360EF1DF9D57
+:1089B00005F4F7701CD7ABFA903EC057C2E87E03AF
+:1089C000BCD75AFC4E577C41D9CEF9C254E74F75FB
+:1089D000A88F73FE20F8B00BE8907EE7979C3A8052
+:1089E000E747250CFEA78A97227F9846DCF89C2251
+:1089F00088CE15EE371A1BA6C7D071A6BA947ACDC9
+:108A0000B4E96A3D87E1AB1877865BD93E59E8A99E
+:108A100063957AEAACEFDFB4A2FC4D7AB1EA562650
+:108A2000C649D0DEAFA1FBC4E2245A163759AFF7CE
+:108A300082BE53D3BCE25802D0D15AC2E9688FB487
+:108A400010E3387BA44561FA43F74AAF047CBF3793
+:108A50005D931FF73588F1A1D33AEF61889B9C5E47
+:108A60004A574CE77944CFE28F47A38807FCCF02EF
+:108A70003FCD9399FF94A231C641D22CD10ED0CBD9
+:108A8000376A0AD0DFBA31C6EC08F76F6E5AE72EA4
+:108A90000BF7B3DA0DA4C0C2F126921D7B8CF3C391
+:108AA000A724E6EFF6CC30A2DD96D0C3A5882F240C
+:108AB000C8E42CF80DD7C6D951DE3EC5FD1A109F6B
+:108AC000EB4F4BAF4405627CD8F732598F7E461589
+:108AD000FF498873A07F3F213617FDF4D35BF277FF
+:108AE00022BF3145397A49A1FEA7BBB76B1781FE7A
+:108AF000D4B25DBBD014C2BBB3025FA34934E06BF8
+:108B000087DF6EAF01FD76DFD5B8CE015E56EA7D18
+:108B1000794489CFF8BC2B39B684E38BAEC4356376
+:108B2000119D4FFB7B7AE6C75A4B905E5FDB6F452A
+:108B3000BFA376324179B2BE98203EB46F97504FB2
+:108B4000FEC25A81FAFB7AA901E5449B6D34EEDF3F
+:108B500032D351B44F2B9ED39D0FD7BB96ED54D635
+:108B600097133FDAC795AF74C267E45F823F563709
+:108B700029BF233D95FC319FF3FD0297E3FE329818
+:108B8000FA74470F661F139F81AEA3E85D3DF7F7A8
+:108B9000CE627293BC2881BED56EBE24333A67FC88
+:108BA000B888F7A79643455C9F1A41F916D89142B9
+:108BB0003FA2EF63FDA8A6454ED684E655C8BF1375
+:108BC0007A99E0DB625F8A07812D4C48463CD76F7B
+:108BD000B24936EC2BED1FE9818EEBD1DBB07F0F74
+:108BE000D85F43F97874DF3D20673D1AA317F0681A
+:108BF00083548B7CDA4838BF96DCF5F0F16F3C1E6D
+:108C0000E4DB8349EDFD13B2805FFBA3011E141F5B
+:108C1000B2E3C3F0A49EF832F6480A7CC1F656EBE4
+:108C20003B11F145C817DF474CBF184F570CFD9457
+:108C300041E08696472566CF8D313DA985EFDFD18E
+:108C40008C437C184BBC5A985F9945B9CF63929579
+:108C5000F571F64E7820C3B84E0ECFF17D94ED4EEF
+:108C6000C1D78892AF65919BB8CFE4B1E3DF05FB34
+:108C70003E7A0DE9037A07D51091DED4FC6054BC2E
+:108C800049A11F85C53D46C527748E7BB4733FEE51
+:108C9000101258FC8AD4195FDA8EAD9193C3F04A52
+:108CA000E0F11B3C4F427A93C7570B995F2F24E7A3
+:108CB00019BE0CE0B521806FF4FD45024F32492604
+:108CC000E0C9F0E6289F4CE19ACFFB1902785310D7
+:108CD00092E73E8DC9AECF06FC706C94E5CE7A7BF0
+:108CE000A2CD8E78D25F23E4BB238EA07C6FACD75D
+:108CF000C2FCF70FECEE3629F06229E28544F1025E
+:108D0000E9AA935C54B6ABF046ECDF09AE2F8F2195
+:108D10009E9E301E656347415FF66531BC29234E38
+:108D2000C493B7B3C7F1F8B35B8BFD10A53C2C35EA
+:108D30002AF1408D5774444DF8B86A3CEB0A6F3203
+:108D4000016F843C8CBB33DE3CDE35DE3C7E3BBCBD
+:108D500051E38BE0277BA22CA5A097D65448C88767
+:108D6000FBBFD7B31EEABDABB2308F658FD5817A1A
+:108D70006B4D2D6B2FF43B65C873E9B19AB767B99A
+:108D80004AA15EB386C51B8A4EB33C989E6B597B45
+:108D9000FEC3B547CC20DF3DECFB372E6F906368F8
+:108DA000BB7703FFBEB8A114EA351BD9F75F40BCFF
+:108DB00088EEEF80B3DE7A787ED7E62C07333F99D2
+:108DC0003E3B92E3E91E69EF11FCAE817DB7E4B84A
+:108DD000B11B413D98E9AD23F83A473EC7D619FF8C
+:108DE000D9BD63ED147F17053DA8375DD4540E40FF
+:108DF0007ED3859D592C35A44149F106F98CD34881
+:108E0000F13A9BC51377D021DE8E677AA088C341E3
+:108E10005E40781EC0DBF14CDE8BF7126D84C58D91
+:108E2000B799D1AF2BE284BEA7890474066BE4F234
+:108E30003F62DC704C8F5A8C178EC914F1C2807659
+:108E40003E1D37FFD697A323F951FE938F7B89E709
+:108E50003988E715DE2C0DE0C51E4092540052F50E
+:108E60006F416FDA037E5426343C6410EC2BAB9FC9
+:108E70008B5FB6692335D297686AB51E103219D454
+:108E8000FEA25D4FF2135F6C4CE7F98FD1121FC841
+:108E900027A265F35F5C4FE5A014E24B5305DB1995
+:108EA000D60BE9740ADFA7CBF15CDFE84FFA03BF0A
+:108EB00099CAF7ED3BC65A1D93970D3A15FD5F43CE
+:108EC000FA7FA64BBD59D9AEE20F157CDCC55C5FBD
+:108ED0005E4A82A8175C94BC585E7A86E9CBCB4D7B
+:108EE000A751AF68DFC6F4C44A1240BD43EDF75B3B
+:108EF000BE5B59AF6A54D66B9A95F5F65C0F8ED36C
+:108F0000FE4CD500F0BF556C7D0FFDBB15824F7830
+:108F1000957C822A488C4F3C7D37FA6D3446CA27AF
+:108F20000A015CDD306FA43F71C6013F00217B8BDD
+:108F3000D61F834F52685DE38A49403FD6D8B80BAD
+:108F4000627C19E3B2EF39EDA17DE9B00B557C22CB
+:108F50005FF8637ADAD05F25F8463E617242AD175A
+:108F6000F54950DA3942AFC807BD82E2855F63F246
+:108F70006A34E17A8417E98FDA8BE3A3B201655C86
+:108F800032D4FBCF2834F27D27AA7DED9B707B7B0A
+:108F900049D9AEDA7761AF0CE0FB3E83B8BBC33E84
+:108FA0004C21AE6320174E7D54A1B0933EFAC368A6
+:108FB000E147417BE99BDB494EF9DBD8491DFB1DAD
+:108FC00045F5465A964E1ED7EB6710DF6E8AC2BC37
+:108FD000CD1A89ED6FE28CD319E17EC3537524411C
+:108FE0001B46EFF5E30C4688EFD5EB981D3179FC75
+:108FF000C703E687F18B178CC52E80D706C9FFBD46
+:109000003F825D7152269817D39280FB7DBD813ED1
+:10901000A77876FDB97B1C1EFAF8AA8EC50BBF9007
+:109020006A17432A9398C7E235BF8DD252F9752546
+:10903000FA10C683CFE8DDB301EF96BDB30FFD9103
+:1090400095A077F708F5DBB5DFD1837689FE2D266D
+:109050000783523707E625104F4E789C685622E367
+:10906000AF676CAEA5307F21E784DFFFDC8A31B1CA
+:10907000200AFE429CB1109F94284CBADB3A8F071D
+:10908000F900EBC3FCCCE7A294F105517E2F81F9E6
+:10909000BFF7012DD1F1D2ACCEEFC3FA2E717BEF29
+:1090A000128F535D8A6171AB871318FFDDC7BFDB79
+:1090B000CACB4B3CAE75C9A6B413C57BDBF877179A
+:1090C000EA8CC6F561FB687FDA50EBC53C289EF759
+:1090D000B19A30BB68BF75FBA6B0F8C1AE84E27D23
+:1090E00030AF841E4E7D0AC06F3F93BB1047867819
+:1090F000EF308BBB01E0556D274E8897127B407F88
+:109100003FC40DC1CE447D81E1497B142BC5BC76A3
+:109110002594EF4338AF0820DFEAA897337EB82BB9
+:10912000C185E3B64F15EDBCFE04AB13EE2F10FE68
+:10913000EBAEE258EAB815CC18F5EA28C6B7D4F178
+:10914000EAD9826FF178F52CCE8766B7307FF81CAC
+:1091500023D9D09DB6CF6D4962F6618C274711AFF8
+:10916000F6447FA33C05819FEDE9FE8E38EBB6B057
+:10917000386B158FD35589F53529D77724A1CB388E
+:10918000EB9184087156753C7F1FC8F39E2178AE21
+:10919000B4B0F597C995A57AE00F0B09E67FAF3C0F
+:1091A000B9A0DE48EB2B1F034F1FF221D44FAB3881
+:1091B000BCBA9A5F824B43EC0ABF7037620FB3832D
+:1091C00053DC36451D35DEB0FCC9EE15A98AEFD358
+:1091D0006BB315EF67AEB95BD19EE52950D47B6CBC
+:1091E0001CA278BF574389A2DE7BEBBD8AF7F34907
+:1091F000762CFA8F4EC8E01B217779272BDAEFD92E
+:10920000FD80E2FB2F48ED53C3E87B4D518CFF13EB
+:109210008FD3DF7740285F38B771BEE2FB7AA97140
+:10922000808FBEBFD0CFFCEBFD9A9729FABB1A33D3
+:109230009AD90D3C4E584BFF31FE6D9751FF699600
+:10924000C836A973DCB0A265CB86EE2452FC90C967
+:10925000F56554AE83DEA4D62B0C893C8E944A521D
+:109260006F85D155080F4CA8775D7F4E46FF593E5C
+:10927000C9797A18C24747BCF6CEFB759D30BFCE80
+:10928000F557CC0EF08F2D39B900F1CF90ACC483D7
+:1092900028BB120FA2FB28F1C0EC50EE7BEC20E5BE
+:1092A000BEABE16C752AF140C051C0396EAC122FD3
+:1092B000047C07D17F00DF02123C8EF9D15EC9E148
+:1092C0002311E2B2CDDB711D77D2D3F255F0EC7FE2
+:1092D000D4596F4238B17C29A11719B85EA2F69310
+:1092E00077F85712B9DEC3FB117EED0D9207F59C9E
+:1092F0008EF8D5205F862F0BF49D5AC2FC23AEB2A8
+:10930000C4C87E347CDE951F4DC051E831CB418FFF
+:10931000A1E32C226EE44B17B81EB3C4F424C6019B
+:10932000AFFE81C1B78278915F7FE3B836D50B4934
+:10933000987F510D47A945F299810E38DF4E252DB2
+:10934000826FBB31DF81A29D7180229EA0D43B89B8
+:10935000530AE74F420F15E309780ABE25C633903A
+:109360005A3919E840C5C7481F753C43E9E7107EE4
+:10937000111C2C2C6E31B0231EC1ECC2909F8BF9B6
+:1093800035E4CCAC7A02FAB645F831FC33E1B9F0F9
+:1093900063A8EDF93BC541EFF7488167B33AC73F92
+:1093A000453C952EF3B33FD28F8749F674186FF280
+:1093B0001BBD138826921FCE71F600ED47D604E33D
+:1093C000C2FD63C25FFDB614C0797F87381F21617B
+:1093D000FA4235691C3D330BFC9D546EC540C9FCF7
+:1093E0003CA459AD8FB2F8A186AE04F07B39098B4D
+:1093F0000F6685DAB12E77AE8BFC943BC9F75E49D8
+:1094000016712E2587B533FE26ECB5AEEC2311BFC1
+:109410003FA6A7302908E5A33426723F561EC9830C
+:10942000FE295D352526803D4EE9500AA7BB8EFCFE
+:10943000156CEF4477AAF58BF8BD6C2E443FCB82B8
+:10944000F0F57E0D78083DE2065D1BACF7478976A6
+:109450002CABBA9DFBD009CD857E451E628D9EE565
+:10946000FD9246A5FE7C3651C459999D71273875E9
+:10947000BD0F3C9F8BEFC3D7D587443E9780DF2736
+:10948000820F86E07D5E01CF0E7BAD03DEE723C158
+:109490005BC0E35A91FF45D827D97C3A11E09C1470
+:1094A000E3FA02F862FAD9C04549139A5799DC8A5F
+:1094B000799CD79B65B48FAA87B37C9EEAFD18245C
+:1094C000276D2D068C0356341F41FDACB58E32D26C
+:1094D0009E5DC3A963BD2A787765AF88F5DC52AD80
+:1094E0005FE487407C3FA9E8B67050B67338887C4B
+:1094F0009632B96F6C20CC2EF1F17D8FD2BAA29248
+:10950000E8F885BF4B8B01F894C92DC753010EAB0A
+:10951000253C6734D2403CE0DF4FE1E7CD06056AE9
+:109520001D160A8FE434139E1BEAFD5DD905F1CBAD
+:109530008F57AFB2C1B9A82B7574686A77F49634A7
+:109540002EC437B2F7931F14425C6D16E617CF3660
+:10955000B0787FD6F7A27D3D289F78534F8C406F1F
+:10956000BAEC5A3C5711B4CA686FC4CB6414E09784
+:1095700080737C345B87785EFCF39D12E42189E77D
+:1095800023EB83FD57D2F273D8F784D03A4796067F
+:10959000FBD79A427016F97D441BCC981C461F4796
+:1095A000383CAA13F41B401EB619B91DC8ED416220
+:1095B000D1221F59CDE3EBE77A11E2C77E7C66C862
+:1095C000A7AA8E72C60E04FF16E40FD0E22F16670C
+:1095D000AC15D76F47BD7935D7AFDA787EF6EA712B
+:1095E0002549604F25D447CE631A9DC4F4FC4A1E1A
+:1095F000F716CF2BB53ECC47AA847CE1B0FCA86F10
+:109600009A2F2CF2C4BB8483554BB4140ED512711F
+:10961000DDEEBD03FF2347B477AB9234B7CD635B78
+:10962000C8D727F2D3AA213F8D3E5ABDBF388944FF
+:10963000E8AF43DEDC18A2C80B13F9CDD53746607E
+:109640005E58E9A3AD78BE0FFAB19B4279695DC15E
+:10965000F948229B4735E48BF50F7FCEF847A8FFEA
+:1096600078DC875F0200C1CFD12CA31FF697273487
+:1096700063774498EF16BEFEBB13B4481FF7F88813
+:10968000737B84F1C57BE2FC07C0B93CB7F3FC9A5D
+:109690004A027360FE90771A69BCF549CCCE16F386
+:1096A0006EB20516733CC7F3171D758B721F5FE012
+:1096B000FBD8746F2003CF118D8B9C072FF6FBA670
+:1096C000D9FD26F0DBCA69F465F0B36B6B254B1846
+:1096D0007D75B5DF21386B14F97F9DE1ACC7FD15B1
+:1096E000FD097BE4F25619E3FB974F717A244E9300
+:1096F00044E96A1E975797098B135C6E90D00E99B8
+:10970000EF26640DE52BF3762EC738CDE25DFD37ED
+:10971000809882E76B29FF98974CC8085ACE5FAFB4
+:109720008CD32EDCDCC9FF46C2E522553BD1AE5EB0
+:10973000FCA4F2BB0AB2F9CFA0F754A8F49ADEDC7D
+:10974000BFB52F89DA09A0D70D200380AFAFDCF5B4
+:10975000A51E526DBBC2F32B949E7B6A81FF59B04C
+:109760003C91E43C08FCFDF7496E1F94ED1F303836
+:109770005CAFBCCEF8FD73F128670CC094E9FF1A0A
+:1097800066B278EBA3944D409CCD60607A8DD0E7B3
+:109790006479951C43DB077FBEDA06FEBFF897C7E6
+:1097A0008C057D3FE1E56827C06B53B1331FECFFAB
+:1097B0004DE526CC5B301A589CD7FBCBC16F81DBC3
+:1097C000BF67E39612B03F2D2D877DE01FD9A8F922
+:1097D000339E1BD93882E5B575E44FB694EF81F915
+:1097E000644C61F262539633DF12D62FE1FA593599
+:1097F0008759FBC1DE3F86F3EACF9E40F598AE2F36
+:109800001BFD707713B69F227F0AC60ED7435BA954
+:10981000DC81243C51BFBB51F2E9E87AAA9AF66098
+:10982000BCA2F2615FE24C902F2F6931DE23E61774
+:10983000FF664A09C475845C992959989F91EBD9B0
+:109840003388F86371A1E91C0F6670FD7A66348372
+:10985000EF7CE2C880EF1E309218F04FCF2C6D2CB9
+:1098600042B9B35C6705792EE21B5DEB0191FD44C3
+:10987000D52F9AD9F9572998039D5CA1760761FEE7
+:10988000A28879BFE6644E67395CDFEB499C104FD4
+:10989000AB3ED47B3BF8030CDD58DC95F21BE3A018
+:1098A00002D4778D60C72C3D10E5637E6A2F3FE7B9
+:1098B000EACC87FC8F9AC9690598877096F20D33B8
+:1098C0009C1F0C64209D527E22519996936C9EA001
+:1098D00085737EA9549FA2F5295B53276829BE573B
+:1098E0006707166B687D6D72216BBF3B7011EA1BB9
+:1098F0009247B2F682C06299D6B7274F647530ECB2
+:109900002862FD3A79CA040FEDFF8A95CB694700BA
+:10991000CFFD56BFD15B13EEA7DC06C90B143E5733
+:10992000B8BFF54A16993B19E0DD2780E7CAC47B2A
+:10993000FF87BF27F27DC53AC577243972FF45FC02
+:10994000BBA5FCBCEEC868B2318AC5A53C3114FE8B
+:10995000475B7A635C2D35D9C6FAB7D07E0A43FDE2
+:1099600008388AFEC4B8CB409E029FD5317FA968D3
+:109970002F4966FC9B8EB31EC7E9E964E75027A711
+:10998000E5C3BED1FDD2F2FDD232BB733B9B1FEDCE
+:10999000D79A877CBD3FF8BB8FDEA4EF6785E6AD25
+:1099A000C68FFB387E2CAD67F1C4A0B507E2D1C8E5
+:1099B00068A6E79142E53AB62733BEBF2DD9CAF073
+:1099C000A2633F92241CA79EC3318DC23DF79BAF7B
+:1099D0007B1E9FCF3F7BDD61FBE584FCBEA3CD7783
+:1099E000ED085F8FC8CF16FD5C59A7FA6E10CB93B8
+:1099F000AAB6F5C0EF1E8D22467C4E76747C9795F4
+:109A0000C7F44BD03BC57D0CC433029D04959C6BC1
+:109A100074DCAFD0C8F3053BD637A190AFCFC2D727
+:109A2000673186DDABD0418FA7831953CC9DF1B749
+:109A300003EE1DFDF52DE0FD29E83A527F401F5D44
+:109A4000EDC74FFFD97828E6A98267079C55F31325
+:109A5000F0047AC6EFFA2AF151CC7343C73EAAE864
+:109A60003AEB5B8E57CCBEAB7A90E7FDDA95F85CAB
+:109A7000D594A58178B9F86E2CF8D81342FEB67D3E
+:109A8000C9DC6E4B23695DE4BBBD919C10D14F874F
+:109A9000CFD5765BBB95E539ABFD06ED090E3F9C56
+:109AA000C3F35C63E7CF87AAF40D88BFEC3585BEAE
+:109AB0000BC91365DD90C2F85B673F5010CFCB1622
+:109AC0001A4A5EB33B28BA242F43FE5D185BB22AC4
+:109AD0008BD63F4AAE447E5DD8BDE4CB2CCABFFFD7
+:109AE000985CC5EAF7947C990DF5AD55ECFD91CEE7
+:109AF000D780BF134FD584512921FDE15CB29DE988
+:109B00001FA51A027864905738404E0A7876551689
+:109B10001A34B511CFB576E0018B4F0CE2F2799093
+:109B2000B0CB035A855DDE1EC3CE13B7833CA5EBD5
+:109B30000D26BBAF00FC6BA25BE764D1AE1E8EFEB0
+:109B4000440FFA90E4A4FA06F839EC16320BF2E767
+:109B50005A37B9403F22CB1C462DC293FB9DE8DA11
+:109B60006ED17E0E1C7AE9A1EE6C1817CC6330A77B
+:109B7000FF9A437FFF0AE2A235574C0E50FF06B70B
+:109B80003CB30AF4ABC12DEFFC9DC95B762E43CCF0
+:109B90007B30F80FE9F341CD069CFFE096BB16C180
+:109BA000FB437FD7D203F063F8395F3DB083F68380
+:109BB000BFE9AE388F41BE90BECD798C0E787C4E19
+:109BC00095A75884872905E17113F3A2DA124E6D27
+:109BD00008A09EA63CF742F5728CAF5E27DD1C10F4
+:109BE0002710E7B4D5FECAB3E5747DF4F9F0209DE3
+:109BF0004198BE3CF206B5EBC3F4EC626255D44B1F
+:109C00008D298AF7CB2C598AF631C97729DAC7D939
+:109C1000F315F5F17D062BDE9FE82856D4EF1B34B3
+:109C20004EF17EB9B35C51CFF7352ADEEF7FA259F2
+:109C3000D97EDA8EFBD0FF9CAB14F47887DF5D0F02
+:109C4000E5C0D686D2583BE9E4A72D0C78EBE1F9C4
+:109C5000D09BB5453E12E1BCCA3237FAF73B9D575F
+:109C60002966E7D7DB34ECBC86F0CB0E36B98B61C6
+:109C70009FDE9628D829B047188371B05F65739F1F
+:109C8000C0FCA8EB41827EAC267DE0474341CECFAD
+:109C90009651EF6DE279354DD37331DFFDAC14D8B9
+:109CA00007F179CF6C761E6038D57071DD10D394D2
+:109CB000609FDC8A751793A5AA7D5AA1A897591EA3
+:109CC00054BC3F26799DA27D9CFD31D53E6D51D47B
+:109CD000273A9E51EDD376D53EBDA4681F7E215014
+:109CE0000F6434B2D5239BE9FC879C6D28857D19D0
+:109CF0007ACE331BE8A5D0E7AE07765874B4F608E1
+:109D0000943E6A4F817FEAADBA642C8FD6D9D1BF19
+:109D100074BCAE0F9627EA1CF8FCB77583B07CB70D
+:109D2000CE89E57FD68DC5D25FE7C2B2B1AE11DF75
+:109D3000DF5BD78C2585603AC88BF8B88E7B13D251
+:109D4000C18E6FD304AA2182FAFD670E225F6CEBED
+:109D5000166883FAC3A465C2285A9F0FC614E85731
+:109D600050D2FDF4A43AFF2B05F22952D8739197F3
+:109D7000D0A871E6837EFDF833C7366BD3097964CA
+:109D80009D2BD962657523ADE366431F9E639B9D42
+:109D90006984FC0A44C610AC4F807A7B146BDFF0F8
+:109DA000CCB1091E9C1F8B1F4F09C58F1F4F8910F7
+:109DB0003FFED525BB19FC28A76EF636C3BA4E71F7
+:109DC000BF9193E4EBE6D1B2589BAF03B97856A5A7
+:109DD0004788B24653FC24E069A3C63115F380EFEF
+:109DE000D511C83B9F2C317BB4430F4C65F2A87D45
+:109DF000A201ED9DD31AE722CC6F9282CF03BC5E05
+:109E000049F910E1D76E0E66001C7E997286D51353
+:109E100082CF4B8EB0BA8EADF38594D35DAD7337E0
+:109E2000CCA7D33A53D87D31C4E74C07F92BEAA726
+:109E3000CB9D5520274E173B7BC17C4EB90C483F2C
+:109E40001E97D90BF99544EB2C9A1AE64FE99DAA77
+:109E5000C3EFA6E8199D9107E488E7C4CB52999E09
+:109E600085FB06F6DC8C68D4C34F6B229FF39ECD36
+:109E7000E173B55B64FFCA1CDE5E72BF19FB6B5FEA
+:109E80001D85F1DB76576FD483DA6B2994287DB476
+:109E90005FAABDF63AB61B44680BE39433399FFAC8
+:109EA00055CBAABF9EA1EF7FB23ADA813CDC723774
+:109EB000CAA707F8CBB3E38CA8B7CC9E9C5E02720E
+:109EC00069268F77CD316B1331ECA5B5EAE10AA095
+:109ED00085A6FC0D20FE17C797EBADB45E91B66268
+:109EE0000394CB7A6ED1C391CFCABE7B3680FA5829
+:109EF0004549AB08EDA5C07B75745E73D7C876661F
+:109F00003F897386CBBF517E85C0C3D33C4F86C289
+:109F100017EDC2B9A992C22E999BCAF4866B295C2F
+:109F20006FCB25B9B794719C3F033DB4CE7E2FA76C
+:109F30000B7FBBB29DEB6D1FEAD9B8EA7B26C4B894
+:109F40006E3E8FD37AE294408F7BC08CF89137FDC0
+:109F5000CB878BE8FAF35A2C1A8CC30B3EEE67F7CB
+:109F60007D155D70239F1BD81A78F10C413C6F065C
+:109F70003AB9939CBADFB30EE5C3E0BF50F9037C56
+:109F8000F1A6FB9333D81A1FF1FCA5AFAE82F3C73D
+:109F90005AE46B47EBD660FD789D07CB13751B39F0
+:109FA0007F6CC0F677EBB672FEE8E5FC71373E6F6A
+:109FB000A99B8EE5A13A37964931AEC454A00BA3B4
+:109FC0001BF3318F3D632032C4195A0C88A79402C9
+:109FD0009E7F361EF25F0C163867A7CE8351F3DBE7
+:109FE0008EFD6FEA748F45766A5158DE0BE86799EB
+:109FF0005DE3CF296237033F19B22D6522F08F53FD
+:10A0000076BB19F4D6A1A9A9ACEEB49B75B43E6C8D
+:10A010001BAFBBED6603AD0F4FED3E11F4DE531EDB
+:10A02000BB398AD6476CEBCEDABD0483D4A5DBEC12
+:10A030001381FF1413E928D043A9316B14A4C896E7
+:10A04000598A8F021D8C499E370AE8606F8A1DF17C
+:10A05000619C7DDD51A88FEFB35D0B476B9CA6FC27
+:10A06000F5F05D497CB916BE1B95B6623D7C37BAEA
+:10A07000E7166DF87763FBEE590FF5098EED5AD0B0
+:10A0800007F7A6B0F8A7E847D445BBE0AF224FAB2F
+:10A090005F8B0BF9785EB30BF978873F624AF9233F
+:10A0A000E0A7AB69962C12CC638AD4117C875CB88C
+:10A0B000EA9B945A289F9DBCED1EF33A4A5F3550A7
+:10A0C0001F82F527D645E6BBD35223F0DDDF733A76
+:10A0D00005B909F9CFBFD7B37B387EC3D757D33281
+:10A0E000CF3C0FED19B719E4EBC11426270F73F914
+:10A0F000F8675E7EC59FD7689CF360FF2B5279DCC2
+:10A10000B6335D57C23C28DDAACE0574D1CEE9BA7C
+:10A110003A95CB077EDF411561E787EE94AFB53402
+:10A12000DC7ECB82BC9CC6E39027AACE7F10F98D43
+:10A13000EABC5FCA17F15E17D2ACCC1BEDB03FBAD8
+:10A1400031BE07C715C1E87834B54B7EF6F81DD689
+:10A15000FD78A4752F252C9F59BD0EE24E40DA12D2
+:10A16000F9CD9DD71388BC9E4EEB6850DCBF20FC18
+:10A17000EC540F7A16E65336D74CC07F13CE27CE59
+:10A18000DC864FA8F9CE3F8B9FDD86DF34C23CD5FD
+:10A19000FC469C6F5697429F837351906F07F7B4AC
+:10A1A000809FFEA144F701C0DBF692E0571AB0CFC2
+:10A1B000E20388676956F721782EE959DC5DE4B13E
+:10A1C0005ED2787E0D7AD16FB72D423ED406C28121
+:10A1D000D2E35BB40EFED36116D7519817E9C3F0F2
+:10A1E000A7ABFCCC77B81ED2B9647425F214DBB7E8
+:10A1F000FF3D03FD5877C0F7AEE050260F0B40FE41
+:10A20000FFF541D1A8F2B44AC42715409E7522EA51
+:10A2100011ADE97A2D94FF6C3BB1353D07FB57DB5F
+:10A220008BAD29838C6CDCD163A16CD6BBB7CE031C
+:10A230003B69B001EDA4F7797EDFA4F337E3415E1B
+:10A240004D927D897952673BB3F5E4AC127B5E6732
+:10A250007B93AE6F14ACEF4E76A7CBE8B70118D561
+:10A26000F667E59AAF08E4430F5D7393C07D6377AB
+:10A27000B647890C6CA2E0ACE3089445179C98861D
+:10A2800033E052ED112807FF8599E777CA271A7244
+:10A29000A3F1083B0EDE5779BFC2A07798BDCACBA9
+:10A2A0004EF7B02DF328F3D48A7D45983F210762FD
+:10A2B000A0BC2605D0EF256BD8BD0BE2BE056AC752
+:10A2C000A6764F00BB97E54B8D843C233AB9B21F6D
+:10A2D0007C34E721A4FB28D47F3AECD8D735981FEB
+:10A2E000D0A475C60E073B764D2FC73A5AFF933F51
+:10A2F000E16707685963F98A84DFCF56B9E6BAA2E5
+:10A30000DEBA2E74BF0FE44157FE8F8C72A7929075
+:10A310008DB05F95E42DFDCA3039481AFFDC01F796
+:10A320007E94CF9503E0D0AED24E72D2F7CAB9BDBB
+:10A33000413C8FB03AB7B308F97CA293F65B9EC05C
+:10A34000DF2733587BBA687F80D57B89FEF64FC400
+:10A350007A8AA8F3FEEE12F52DAC9E25BEDFCBEA7D
+:10A36000B962FCF7D97866F67E69F7EF4D02FD43D6
+:10A37000F0F771DD95F7F2507E3FB1FBEDF34994B4
+:10A38000ED5C1E887B78CA7E302EFA3DA0E7460938
+:10A3900073DF2AD7EAD0BF7DD5D698177E1E59E441
+:10A3A0009FB84ACD4ED0F7AAF6F5DE21F37C1CD03B
+:10A3B000377EC4E3CA65B209E311D737333EDF9570
+:10A3C000BEB678CD1B8AFDECD4CEEF49C6401D1D2C
+:10A3D000EFDA134998DF4E7AFA310EBEBCBB24E2A5
+:10A3E000ED789E55E47BC5F7204EB04FE37F13C553
+:10A3F000EEA1BCE047FEBBF837CCDF5BF5CC119497
+:10A4000073F3653BE2F1F12CF70A804F9B99DD373E
+:10A41000B878CD21A4D7B5995C4FB004FB86C3F3BF
+:10A42000C1CEF0FFE11DE0FFC37F27FCD57E667142
+:10A430001E7AD937CC4B6B33B338A883EFD3798DE1
+:10A440007D0087D7D340E7D716F973AC32240DFBD4
+:10A450001359BED1BB4560075DAF35E3FD44B3562C
+:10A460007D9C177E1E45946AFDFF73A0A38410BCDB
+:10A470007675E7FA5E08BE2FDD01BE2FFD3BE19B3E
+:10A48000A40DE81D10373DCBEE0B1BE03FAF0FCF07
+:10A490007339D99DC9DDD866162752E76B9DEC6EDE
+:10A4A0006678C5E3315593DF1D06F118410F23A3EC
+:10A4B0004923F8D7295E3B385E3B00AF05FE86E2B4
+:10A4C00032F4BB08F415C25FC2EC620E277F67BC92
+:10A4D0003D7D07B89EFE77C2B589EABF18C77C3DAF
+:10A4E0000AFD276A38FF8DD3BB80B731EDF6703691
+:10A4F000A6FD6BE06C4CB32BF2D204BCBB924FEACE
+:10A50000FD11F38E40A745DF864E1F4DE77C4A1BA9
+:10A51000C03C51F5BEC7A675DAF7B8B4DBEFBBB2E5
+:10A52000FD5FBCEF6AB8A9CB4A1EDF543FCF4FD3C3
+:10A53000FC4BE1F8FF9BFF7C76ED6145FBDC3527AA
+:10A5400015EDF33C1F28EAC302FE524073E10F1FD2
+:10A55000712988FAE5B7F5AB77E54F9FF4DA120D6C
+:10A56000C4DB06F9993FBF2DDDBD01F0EB7D8DB752
+:10A57000DE4CE13AF05C23BBA7AB2207F38756F130
+:10A58000397E39EC6F9F3C44F1E64B62407FA7EF88
+:10A59000F05D5A7B6E673C28BEA121CEB03CB46210
+:10A5A000A355EB447F0D7146C29BC7D318DE61FEF5
+:10A5B0000FA5F7E946A28BA7743E7DBA84F94ED366
+:10A5C00009CB87A6A5CF4DDB2769890FEE352E373E
+:10A5D000697D068CF329CF2F1BF8BDC7243E4E7131
+:10A5E0008E5976CA98973675108B0F3E606AC47381
+:10A5F000A4334E3C7CED21DA4ED67B8A58BEB5386A
+:10A600007FF607CD3789FB3D9E46989F5DE27164DA
+:10A610004987F761A9BF9BCBD73B495E2743BE4B18
+:10A62000F003827AB7A03BBABE13860276BE027EE2
+:10A6300077A29CE87CBDF17CF3965278BFF2B41D02
+:10A64000E15233685D1EEC63CD28E953435EC8AE2A
+:10A65000A959F317ECA74C7EA51EDEBF7E96B9C2A2
+:10A6600007B6523BC51EEEAF0CCC01BABC93FD231E
+:10A67000E67DAECE87F8F449DD092CDF1FF14E11DF
+:10A68000E819813A7F44BFE4B7F50F08BF80F013A3
+:10A69000083E20EEE17B3D8DF305A3D41DEF4FD3A3
+:10A6A000B252F0CB039DF9EB9B77E0AF6FFE3BF925
+:10A6B000EBD7C5F3CA642617D5F8ADC66B81CF704A
+:10A6C0005F37FCDEC00354DF03B93A9378722B295D
+:10A6D0009F9DBEA4413754FAF678BDCC74218344C3
+:10A6E0003867F2CDF9B91DF74D2E95D13E10F90915
+:10A6F000621FAEA775D233BF4A4BB8EDBE29DBFF50
+:10A70000ED7AFC8539DF4EAE11853E604DEFB4EE3B
+:10A7100084F4DBAF5BD9FE2F5E77D8F99739B22688
+:10A7200074DE03F287218FB1DDCBCE33566435E082
+:10A730003DF164503006F4C6A50765C443A2756AAE
+:10A7400053C2EE976A25BE0F011F970C5B82E7E0AC
+:10A750003ADD0B656AC27371EAFBA144BE7035EF46
+:10A76000477D4F5435CF13AE56E5ED0C49E7E7086A
+:10A770000B4801CBAF50EAA5EAB2AD8E28FC926D32
+:10A7800037EBD00F5092BEF7479EB4D03E8CEDBC55
+:10A790006F13EEB06F13FE9DFBA6C657D9BC13CF47
+:10A7A000437D537C2576E73C98B7E0C3B320878B85
+:10A7B0008E3BEB80C10BF7F98B7BADDB2576FF4C35
+:10A7C000FBA704FD4677BA1779F069379EE71CF8B6
+:10A7D000AE536679042CDF40E829426F19DA1A94E7
+:10A7E000D9FDF5FC1C14CF0BFABAFCCBE1B7A09E47
+:10A7F00023FC6FFF2CBFB590737B8C8C3E847FB0A5
+:10A8000030E0423DAE4DE72B827BE83DFBA322EAE0
+:10A81000013F4967FBD4D5BDAD4931EE9FA4433B11
+:10A82000E7EFE2FED63299DDD37CDD2FA3FF6EF594
+:10A830000F7FF7EB67ED77B6EB6B2CD723DA45A2EA
+:10A84000ACD1B0731205A576CCDB037B09FC77C2D3
+:10A850009FA77EFF5066C9CE74F42F0DC3FB34AFA3
+:10A860006F65F3E96A5F6AD60471FC2EDBF9F8358F
+:10A87000078B2CE1F7607C9E2E097CB65C3486F653
+:10A88000F5EBEEFFF0E074857EF3FFBADD3049A60C
+:10A89000AA23958FB99297E9A784E9A9B3881FCB1A
+:10A8A000392488A59BB07CFAF9C481E542E2C2D282
+:10A8B00095E9FE281DF35B8289980FB9EF1F7D0192
+:10A8C0006FAE8D18DA00B973FF2A3DAD3DDF8EE320
+:10A8D000B7BFFE8F0CC86BB913FDF78B71B6A647D7
+:10A8E0008827FF67B18CF11392BC12E9A19CDF921B
+:10A8F0004046B1B8D88F12B3D83DF51DFC2F69BBC7
+:10A90000E07F106FCDFD54C3F243964A787F6B739E
+:10A910004083A495BB28CB0BF7F13437B1F6DC2A82
+:10A92000AB57A2F5DCC151AC7D85D50BE71E669314
+:10A9300000D2E35C38F520C33918C6DFC43DE554C6
+:10A9400063CF063D6B518B91E5EF93404FE0E37988
+:10A950005DD8376333985DDC2F9BF1ED7E254A3F50
+:10A96000444C06E3035599254B3368B92AC3190BA8
+:10A97000653F9B7FD34F0BD12F8FBFA3F2C5E0075D
+:10A98000317E28BE7B32B3241EDE7B5562F9E69E03
+:10A9900083FCF706483031FCFE505766696A061D95
+:10A9A0003F2B83303AEA02AEF07B73AE08F69CC8C8
+:10A9B00067EC073615FAC7D93D54AF4AAC5EF0BC18
+:10A9C000EDBEF57DD187EF01BDF6C94CF73D387F6F
+:10A9D0003D212698FFCF0DDE1DA87FD666803F72F1
+:10A9E000C9F3060DE8051F51B10AE74AFE5867C4CE
+:10A9F000F2636AE742F9276AE742F929B573A1FCD5
+:10AA00008CDAB9502EBAE12084F28FF7329CA3324F
+:10AA10008A42F136F57C877378768C7F508FE357C6
+:10AA200065BA11BE1DFBBD9F78211EF2AA35986A3A
+:10AA3000BB0DBE75CD673CDCDE8B9C9FD59FEF7B4D
+:10AA40005E9316E5785E73206671D87B9333F4D8F5
+:10AA50009EFBFA053C1FDA66E980AF53A24B9EA429
+:10AA600061F5C9CFF741F856653A97C23E52FAFEF2
+:10AA70000E9479CDBFFB099CE7A1FD631E41BB1479
+:10AA80007C0AF57CD53AD47010EB7AD5EADF04DF86
+:10AA9000BFFA7A36AC84F21BC2E806F0488AB4DE0C
+:10AAA0007508D7FB0CC14238A772DF2D3962DE7002
+:10AAB000556631C25927F04DC089EFD7B7A5EB8E47
+:10AAC0007836C75322EED700DE690739743306F4AF
+:10AAD000BA721EAF6F6EEAF93EACCF734226BDEC80
+:10AAE00088BF0ABA7B8EEF8F28730FEA5DB04FAF35
+:10AAF0001EBCD813EE5BA5FBD213EE5FDD9CD14BE1
+:10AB000091DF943BF8EFDB7E1A8FEFE3EF7CCE20F2
+:10AB1000DBCB209F64A6F1F03158D26CCBA76590B7
+:10AB20004F3237593A0EE53C7BD668C82311F9EE0F
+:10AB30000BFA141F07529AE028477DAC18984B98DF
+:10AB40003C283546F3CB9F85FC8953D4C7247757DF
+:10AB5000BC3FCEDE43D13EBECF3D8A7631EE0447C8
+:10AB60007FC57BFD6CC16CB0BFE83AD87DD7BB64B4
+:10AB7000CCBBCB7DFDF4BDF7D0FAA417A7E2FD7ED8
+:10AB8000AFF2F6497B4BF1F703DB293CF55491BA60
+:10AB900034E8B1A77E0A9DA9F4FBCA832F1C77DA9B
+:10ABA0006FA3DFDF41AF17FC75798BB108F8EBD7E6
+:10ABB000D5F3D5FBB23F839F0BE47A7F57F8D241A0
+:10ABC0000F929DE10BBF674B8D2F9059CAF08F9567
+:10ABD000934EB17360DF948F7D0E7C2CEC1C664726
+:10ABE000A9F2B7F5D33BDE5F05FEF7F76482E7EA2B
+:10ABF000F8F9BCC5F0FF7208CFC9C2ED8FC07D5215
+:10AC0000F4B907F44F3807EAA4FDFF3983EB4D95FB
+:10AC1000871F49290CB593D59F2ADE276BA50D8A7E
+:10AC2000FAFA2C657D73F186F0EFBBE2878BB7CE25
+:10AC3000D3BBF1FCA614F1F75AC57CCADE8AC2FC6C
+:10AC4000BC899077421F55177EA085F8EAC42EE490
+:10AC5000A7E03B3364521BA9FD6606F3DF4F782B58
+:10AC60000AF359BE69BF1F515862BEE06F98FCFCE1
+:10AC700028D6AF0DDF774326EBFF5AD1961F7E050E
+:10AC800071CFFD04F337AF5919DFCF6BFA42A3A19F
+:10AC900065BF6E0C5FF22C010DC893F68A680FE455
+:10ACA000E7D72C35635E67BFECE087C67C42623332
+:10ACB00037FFD848F7ED0F7098314C9EB6838D431F
+:10ACC000EBC9FFF138F2FBF16F45F934DF623DC9A2
+:10ACD000548742795DC2E87B0EE00D972BE03BAFD5
+:10ACE000798474C819E007B07EA84FCAFCF1FB4F05
+:10ACF000D2716B4E32FA864C39B5DD3E33CC6E27BD
+:10AD0000CF31BA34D27FA0CF2D3BDAA0077BEECE75
+:10AD1000F4DD8879335F97AE0B3295F67B043A3ECB
+:10AD2000359EEE4BCD7E76BFC4F5965E78AEB52BE4
+:10AD3000F95DB35583F427EA6D2DF258C057F5F944
+:10AD400070014F62C951DCE3B472F8DF26839C5C6A
+:10AD50007950CB923DBA1A67A386D8C3C679F590CD
+:10AD6000A182FD0E259B7FBB90CF07FF6A2BEECB08
+:10AD7000CA7511E41C95CBBA7890CBE5ECF715CEEB
+:10AD80001C4C2A01F89F9188CF8EE7AE589EF1FDAA
+:10AD9000AC3B786EC2FB4392FB68C3EF371476E49A
+:10ADA000D483537B811EF961D3FC337467C8A2CC72
+:10ADB0001E38DE34E241BDF78CD5950EFE86493C47
+:10ADC000DE7FC61A6C057E7C6678B404F17BDAFF00
+:10ADD0007A12765FDF199D2B9DDD0321F28AEFFE4B
+:10ADE00056F7B695C96B8BC743BC7A16B1801D79EF
+:10ADF0009FCCF45AF226A34BC1EF6A24BF0DE6E9BB
+:10AE0000CA9CFCFD4CFA5DD29A1FA15DD901372D79
+:10AE1000FF9DA6AFA9D776D8AFBB25763F8983E93A
+:10AE2000FBD5C3AEFE6C1A9C73A376B644E733BF62
+:10AE3000F930DEC3A3B6AB3BEC9BFFA57FB4B37D7B
+:10AE4000E4DA925914F27BABEDA40EBD5CE877BB5B
+:10AE5000589EFB91E14FB72DA7F5D5BBA2118E9758
+:10AE60009F3778807F5FDE61407BE7B22D786E157B
+:10AE7000D4F7E63A3C385A0E9EEF12F8BD4463FF11
+:10AE80003DC81DF25B1DDEB7F1C5CF0DF87B1E4B33
+:10AE90005FB86B07D84F5FA4DB5F7E05FC7B2F2775
+:10AEA000E07D0024997D3F91D323D0979DEE87FCD0
+:10AEB0000B33EA0D4B5F4B41FE25F6EFD2CFA3F0EB
+:10AEC0001CFCE513F7C7821FAC55B387FD8EA46C3D
+:10AED000F2001F5EBE230AF53EA277BF06EB2FFDF0
+:10AEE000C5C469FD61FCDF2510584F7BCB6BE87F43
+:10AEF0000CED6F64B97EBDA507E3031D7296E5CD29
+:10AF0000CE0DDDCBBC1FF0A78A887B1059DE6C818B
+:10AF10002CB1DF957C22F239F0DF66F238A9F09788
+:10AF2000C4116332D0A19BB07B1F9FE88DF7EA9ECE
+:10AF3000CFE4E79749909F7714F876AEFA00FA4B82
+:10AF40000C2C5FAF8B7B2D3FCC64E782171BFFA2DD
+:10AF5000F09B54AFB9A1ACF765BFB35C506FEFBFC6
+:10AF60008296AB389CFF91E4FA08D6B7AC71CBBEA1
+:10AF700077112ECF7DEF0F30EE0913FA69C8BB0CA5
+:10AF80007E6AFB65B131C8E30EDB1571F58BCFFC32
+:10AF90001EF3472EBE7E0FFEBED87CD97F11EEC7B2
+:10AFA0006A33FB3F7988967B4F9CC27D51CFB75364
+:10AFB0001C5E627CA512D6D11FF2575CED9948B792
+:10AFC0008CDECF6FCA45F8093F6DFBE5C8F6959852
+:10AFD000A7E85FCC4FF42FDEFBEF4CA6DF5FD3FB7F
+:10AFE000F3402EEF843844983E7F2DC69F073F756F
+:10AFF000BB339DE5735FB3D17A18DEFC5F8A9C0C8E
+:10B00000C3008000000000001F8B0800000000004B
+:10B01000000BAD580D6C14D7119EB77BB777C67770
+:10B02000F6818D7FE21FF6CEC4187CF816FFD5B1ED
+:10B030004D39FC832842CDF193D44A216C9A4028A3
+:10B04000C4F864438B92AAAC7B95F911515C358AA4
+:10B05000A04DAB83081455541817228A30BD04152F
+:10B06000701BD1438914925A68EB36D46D0CE7D229
+:10B07000A42D6A2477E6ED1E77EB9FB4897A966F4C
+:10B080003CEFCD9B37F3CDBC99F7DC01F8A906E87E
+:10B0900070823D37176907532238D401A0C13C4E56
+:10B0A000632ACE3F5770016C35240C21671EC063A4
+:10B0B000607E72736C500FB091FE9671BCE1B7F771
+:10B0C0005916C01330608732809B42EF1E49041826
+:10B0D0001FF8A15D7591509BE7760500D33E1026C1
+:10B0E0002B0126E9B3623A05B001C9D16752A46FBA
+:10B0F0000D603E7EB7404518F5DCF1B834210050B4
+:10B100002A331B972B811292C37925568B74D0A1B9
+:10B1100044D09E3D42C827E3BAE7A4581588A975D4
+:10B120007B04958F8FB3B7B7818FB68B5585DC00C5
+:10B1300089B912B06CA4F3957810F1D03E01E50402
+:10B14000EA49D8A16310F7AD6D15C283DC0FDBA807
+:10B150008EFB0AC0B87DB59538EE07584EE34ED346
+:10B160006E2F8E07ACF2297FACFC0559E0FED5E6C8
+:10B1700008E101FF743C36D07C1D40046222E18A64
+:10B180009F8D4EC4BDC9C41D202802C66597C9EF56
+:10B1900072BA626215DA9DE5D444F4A7E922C605C5
+:10B1A000F9265BEC4DA22C08B017E30BE7EDE30F9B
+:10B1B000EC201C0A2A6DA4A7D10C2F435D9B50AE36
+:10B1C0008F8581F675423FA787589CDBF16598E033
+:10B1D00034081E1B51849FD3360871BA0AC29CAE34
+:10B1E000867E4ED7C000A76B21CE292C8945C04B47
+:10B1F0003B7DC7733B13C9579E152691D67E0DC262
+:10B2000003AEE938EC31719A1D078D513E7E5E1C0C
+:10B2100056815AC0F54DC5A3B882E7F7543C1C943B
+:10B220008F18B70C8816105D0EBA487405252EEAE3
+:10B230005909B28DF8560872BEFD7FC4A141576D01
+:10B24000AA7F063C5A67CE8BEF9A7921128675A9A0
+:10B25000389D9165CE27E305686768E9F43826C70D
+:10B260006B335BFE2E7B008E46DB42B642E46B5AAC
+:10B270007ACA90FF99BCD1E09B5A7EE143FE54F418
+:10B2800031830FB4D4D81580DEDEC7436D8F00A89C
+:10B2900019595510A0C2512E50FEECF618F8ABBD4E
+:10B2A0007B140F9E23B5C4A5907F4E076286F88954
+:10B2B000652234206D93D49765B4B37475BCCF40C8
+:10B2C000B825BF03CFEF78DC0E8770FD7EC990777D
+:10B2D000E03A6775CA2F1CD732901F1CACEC61BED8
+:10B2E000D9F747FDC748BFDAFBB00664C739A67C6B
+:10B2F000D63E3FCE574F923C38CB81E25EE434F4E9
+:10B300008C0F5656525CCE1048349FEBAD21DCFEBC
+:10B31000921F3A43F209B7915F672807E7CF4EDFE4
+:10B320009783A7497EEA78E2433400D7BF25ABE78D
+:10B3300068BE2BF3D372AA4B7797BDD3A77B537903
+:10B34000CA70FF4DE87724085189D79166CF6DAC5C
+:10B35000A3803199C47826B6A21EC4A136A446ECB7
+:10B3600038FCA54D13F558A4486F8CEA5D97A49757
+:10B370002EC3752F6FB8251979566CE499598786B5
+:10B380002E0DBF5064B021483B575D97EEFFE3F7A9
+:10B39000885FD73D9742E2A9F374B407B248C86505
+:10B3A000A91BC973D678DE1113B3885FBC95E496E8
+:10B3B000BF3352467EAD18D1236ED233F45E916115
+:10B3C00087D91782FF645FA42FB48B549C01BACF36
+:10B3D000895107E2D5CDC297DDC4FF9C291ADAFF57
+:10B3E0006727E64736C9075D85E8D776D3AFCEE154
+:10B3F000137D6EA4DB5F7D7A2D54D171B0F3FA2DED
+:10B40000E30F9DFF9DAFDB53F59C7F6320D0CF2ED4
+:10B41000487E6212E541E78055AE0B0EFF8DEA4E85
+:10B42000577A9D47BB2664772EC7DBEC57402D0427
+:10B43000F53D6BAE253F5C64F790147530A43FE991
+:10B44000513CC49BE7072E7E0FD2E5E1D51C1EFBC5
+:10B45000E479FAE601B43D278557E0A42348B8070C
+:10B460004EE607C9BF80045B421CEF28CFE300E62D
+:10B4700006C37C3A3D77C227E03EA7872A14ACA0DA
+:10B4800070615F10FEB830655FB7799EDAC553AD65
+:10B4900012E6C1BD67C0834712BA875F8B3891EF50
+:10B4A0003E082401F7E80BF5DC1B13A2A4A771B832
+:10B4B000A680E27DD63C9F8E0201E4349C32E439C2
+:10B4C0002057A4F824BE0E333E9915F32CF36EE5F5
+:10B4D00021CBFAEC069F75BD168CFBEBA91E1BEB6E
+:10B4E000E7069758E4F767ADBA4679B93CBE6D2DCB
+:10B4F000E192B3BADA325F0F4E7E7FA82B762951E4
+:10B500005C0F1F1BFDBC017F783F80B048FE35E912
+:10B51000003FC278348EDB2C71CFD0311F512EE327
+:10B52000DDB4B8E3AF43B6F2CBBC661E1443717A08
+:10B530001EA470763DC091E7C1300A11CE6E298AF3
+:10B54000578E6938D5C3C26C9AAFBB264294E3DEEE
+:10B55000A3C4707C7EC88A777E8715EF42D58A6F38
+:10B56000D1762BBE25612BBE0BF65AF1F46A56FC40
+:10B57000CA0E345AE41FEE6FB1F08B8EACB1C82FF7
+:10B580008EAEB7F095AF3F61915F3AF00DCB7CE0A6
+:10B59000FC0ECB7C32AFA6C67D59ACDB223735EE34
+:10B5A00035D79EB7E84DC659C39FFF679C774D8935
+:10B5B000F3F3681B9DBBEB596387E9187E35D3A86D
+:10B5C0004BED62733C48F16EB62B14D3DFC939AD35
+:10B5D0006E3AEF661F0A997D08D43E1EF7909927B0
+:10B5E0004A5CB94C75B4FA66A8350BF95A3D7C999A
+:10B5F000CA71FD587F6BB6CCD344F6A03C33717949
+:10B60000B48181CD725E90CF4BE1B641EB15B35161
+:10B61000B8E9D36884974B4A2ADC7FBD39CF1A8CAE
+:10B62000BABE2E9801B6343C969BE3007E6E5FB3A3
+:10B6300031051BCCF700DECB41A27BB9E08C46BCC8
+:10B6400033DD27952322BF27A9FCDE7495A976A2B6
+:10B650001B9DF152EA5FC7F2D4235EACF377054538
+:10B66000E6F72CA647C8A90439C69BCE8D50D04F0B
+:10B67000F777FCF321ACBBC2F590E6E7E67B74B448
+:10B680005F35ED39E1558F919E51E6E9ABC1B5D7F4
+:10B690001B3F2AA5FEE3101109AC8381ACE06B349B
+:10B6A000AFED6F9ECBFB6A3EFA87755417647E7FC1
+:10B6B000D09E67FC3DF011297B24ED9C1EB0F3BEAB
+:10B6C00003E6FB68B38957F27DB4C9DC7F14556C7F
+:10B6D000C73ABDF9FC558ECBCE8271B0E5F07CE364
+:10B6E000F7A4A78B5DD587C8A7608DB27E298D276B
+:10B6F000DF4B45E2E7E98BEDA23F5B9FE1BE98A4FB
+:10B700003B0BC6F87BEEC1FA53461F995DBFC6FBE3
+:10B710006CCA6F43FFE8C14CDE5F460F96B4104D14
+:10B72000E9BFCBF56F0EDFB0E4C996BDEF5BF2EF7A
+:10B7300029ED0F96793D77C25E84FEEB6F14AEFA69
+:10B740003AE277E79CA39EDE8D18B79BDEBA947E23
+:10B75000FDC5456DB4DF7FF7F3AF1CDF917D71B0A0
+:10B760002D4CF9796BDF4DCEEBFB744EA7FA997C2B
+:10B770006726A9F41654D8303E136C8E72DC3B7DDC
+:10B780009F2D3EE35D32B232AF85FAEC48896433D7
+:10B7900068B9C11736380D7ED56AA209BBEB00BD6A
+:10B7A0003347180419E6C32616FAE953E8F70B796C
+:10B7B000EA27947F5D3B26AA6C781EBA02FA930CA6
+:10B7C000E3593C57FD17F9CFF07A57388FDB594EC4
+:10B7D000F78E3141AB62580BAA7D85EB6C1897B19F
+:10B7E00039DA5DEAC44B8EE71ABC649C8F46DF24CD
+:10B7F0003F0FCD1E55F0A19E0F9918E3F9FC4B1693
+:10B800003DC1F34D97D6BBF979EAA07717BD77E92B
+:10B81000BD91C83068868F71FFE64CA10B7D463D17
+:10B820006B3469BB78B89CD1FDE08803E83CE03E0E
+:10B830004181F61972444F209F87B6D33DE5D792D8
+:10B84000719FAFFE95234675639BF3631EA7129FFE
+:10B8500097EBC92DC3CA85EB725F724423649F1EA8
+:10B860002F5D87F6F5DBF1FE42EFE977711ECFDD44
+:10B870009D17171D3F94168F12330EF00C80319FC9
+:10B880007F8CE63B87476F511DB9E255BDE4FFA8A9
+:10B8900020D7531DE9CC7A53A2FA53E393F93AB473
+:10B8A00097FB8FF5E0FB8CE3ECF4FC09F3750B16CA
+:10B8B0009B6C7ABF09EA625ADFE9D425D28719C1A5
+:10B8C000EF7FB3F97F676BFC153FD2BB6EA594F693
+:10B8D00049EE8B76D4909EA4DF493B527A3E3BAF33
+:10B8E000B739272CE7F7F6D1FDE5744E105F95ECDC
+:10B8F000AF16D996F533AC7FDC8CDBBFF3432B7DE1
+:10B900004877847FF0C6DB726A3EC1FABFF501C595
+:10B910006BD8C5EBDC6CEBA7FAD9796998E3817E2B
+:10B920003E49FEA5F9F928ED93F4F3CED07BAFF8AC
+:10B93000E52FEE5FA2242E91DEC4B1FBA532AEEF5F
+:10B94000BC78F526E54FA7F9CE87B3D6F7BB630ED3
+:10B95000BE13E7A5D573AA710BF8344BBF3F3992DC
+:10B96000EB8B6DD6F578511670BFB3E6FBE13C9DCD
+:10B97000DB19DE9967E3026F95670BF07E467D0069
+:10B98000FB2ED5FD64DFDD7D43E0F9B8DB0B7C9E4B
+:10B99000ECA2FC67FA15DE0792FF478830EC6F983F
+:10B9A00007DD92FA6DCA0F507B785F1017B814CA82
+:10B9B000E3C1DFAC31DF4B469FA933FB4A1DE921D0
+:10B9C000FBFDD9BCDFD49AFBD63BF11EE3A392ADBD
+:10B9D00099FF2F31FFAF70F00A7F67FD0774153EA6
+:10B9E000C90014000000000000000000000000007A
+:10B9F0001F8B080000000000000BFB51CFC0F003BC
+:10BA00008AB7C9333098293130242A33309C01E277
+:10BA10002479841CADB02A0765FA5F303230BC024D
+:10BA2000E23740FC8E9174FD3F8510EC87BC0C0C16
+:10BA3000BF80FC8D405A4C8081E12690FD1B88BF61
+:10BA400003F9E27C0C0CCA406C06E4BB00E93C2024
+:10BA5000F607E23F407E1B1F6EF3FF0AE1B7FFAA25
+:10BA6000002A9F571095FF911FBFFE0E41FCF2BCAC
+:10BA700004ECC7864FA8911F1F3CEAB44F33D4C4CF
+:10BA8000371950F9A7651818EECA323028C843F89C
+:10BA9000D790E48D8062676420ECAD620C0C7BE58E
+:10BAA00018182E336037771B507E1F50DE0E6A0E3B
+:10BAB00000B5BC7B1E680300000000000000000011
+:10BAC0001F8B080000000000000BE57D0B7854D5AB
+:10BAD000B5F03E73CE9957662693848484F09824FB
+:10BAE000803C020E010248A893071425C008A868EC
+:10BAF000110651088F3C44ED976BDBCBF04AD1D255
+:10BB000036D6B6D25ED401E15EA45803448D1A60E5
+:10BB1000806051C106EB03ABD600B6080219A0EA5B
+:10BB200048F1F75F6BED7D92732633407BFBDFBFFF
+:10BB3000DFFF8FB5DB7DCEDEFBECBDDE6BEDB577D9
+:10BB40005496CE581FC6BEC1DF8D8C3D2031868FE6
+:10BB5000B4127EFFEB9B0CC6A65AE1BF64C6C6CBEF
+:10BB60000EC6463036C5C142166833A5081E766338
+:10BB7000ECCD4D5248C63ED02E58C8D822C67F5371
+:10BB800015D6245DCFD885D13BEB867918937C3EC2
+:10BB9000565B00A5C7CD666159B4F72BC9C558F2ED
+:10BBA00068136303789F6FE0DF149F9DC6D2EA6934
+:10BBB00013530DF5747F0F43FBEE33730DEFB30298
+:10BBC000830CEFB32B0A0CF55E353718DAF7A92D85
+:10BBD00031D47382371BDAE7AD9966A8F7ABBFD3D0
+:10BBE000D0FEBA75771BDE0F0C2D32BC1FBC65A9C9
+:10BBF000A13EA4E12143FBEB9B5618DE0F0B3F62F5
+:10BC0000783FFCE0CF0CF591ADBF36B41F7574A33F
+:10BC1000E1FD98B6AD86F7633FDD61A88F8BBC6C04
+:10BC2000687F63749FA15ECCDE30B42FB5FEC15037
+:10BC30001FEFFEC0D0FEDB99270CEF6FF27C667819
+:10BC4000AFD1C1A401170DCF277BFF66E8A7303F16
+:10BC5000009B3133ABA1D2CAEAA9B4B3062A1DAC0A
+:10BC600095CAEFF60EDC49F4F964B08E01DDAD0C37
+:10BC700046FE9406E59BA3F39203F9389A8F31A010
+:10BC8000DB297C6836C5EA08CB4067162B0BDA80C7
+:10BC9000145C51A0B734A0BB28A3D21D057A1B0E9B
+:10BCA0007417B552991A4DA5E769513795DDA23D34
+:10BCB000E8797A3493CA8C682E95DDA31E2A33A3C3
+:10BCC00083A8CC8A0EA0B247B480FA6547BD54F66B
+:10BCD0008CDE40CF7B454753D93B5A42CFFB447D56
+:10BCE000547AA2375399139D48656E741AB5CB8B5D
+:10BCF000FAA9EC1BBD939EF78BCEA4B27FF46E2AFB
+:10BD0000AF8B06A81C105D44E5C068059583A24B67
+:10BD1000A9DFE0680D95F9D187E8F990682D954382
+:10BD2000A32BA8BC3E1AA4D21B7D84DA0D8BAEA136
+:10BD3000B220FA337A3E3C5A4FE588E8AFE9F9C8B9
+:10BD4000E83A2A0BA31BA91C150D51393ABA95CA1A
+:10BD500031D12D54DE10DD41FDC6461BA82C8ABE14
+:10BD60004CCFC7459BA8FC16D25B1AD25D984A5FA0
+:10BD7000F4757A5E1C3D486549F42D7A5E1A6DA50E
+:10BD8000B22CFA477A3E3E7A94CA09D1E3547E3BFC
+:10BD9000DA46E5C4E8692A6F8A7E4AE5CDD10BD43C
+:10BDA0006F5234426579F4123D9F1C8D52A9C93BF4
+:10BDB000365A3DD3A6D15F2EFEFF2CF75F06835C7B
+:10BDC0006201D337503207D0C198CEF6B125483B37
+:10BDD00092932AD05512D0770AC8429487536AA406
+:10BDE000D0B773803EBAB5B5605D1D6DF158A07EC9
+:10BDF000178BA848BF1FB13627CAD3BD634EF66C58
+:10BE0000037A7D333DDC0B881B7F246F559C531ECA
+:10BE1000CADB334A1B3C9FD26D5F7AC081FD8137FC
+:10BE20000A90BCE1FB48DF408E38CE5D0A0BBA6059
+:10BE3000AA47708431D42E6C81FAAC72E62B80F65E
+:10BE400075632C3343F09DBA027F851FCA1FE7F844
+:10BE50006762F93A320FCC7FBF288F3013953FEEDF
+:10BE6000EDA672D67DFD383F950110B3AE0E87F476
+:10BE70000CDE8F3922BDFD43AEBD9FC2A0DFC8CE10
+:10BE8000F6CF30FF3BF83C58C206D4383ADBC1F35A
+:10BE9000A3D82ECEF30FE23D6F308120007D154CEC
+:10BEA000358736A37E629EE45B705E564FF2346740
+:10BEB000E2793DBC2C335FE9AB9F6788E6F7B0C4FD
+:10BEC0006636D0F8BECC6943687CC27730D51ADAC2
+:10BED0009C43A830D0CB5F119ED02FDFEE6FA7F52B
+:10BEE000413FBF13E1E3BE26B840BF2F089E0AF4CE
+:10BEF0001B72EDFD1297F54CCCC343E389E7D516D1
+:10BF00001694004E91CDCED0C61C5C9387E4678515
+:10BF10005B08D06E000CD0EB15290842C65A762774
+:10BF2000854DD0BE68B37323DA01ED25C18CA90815
+:10BF3000878D2ADB0C4D56ECFED1BBFF01F5A20D1F
+:10BF40002AB3407DE1C59F1732A0A3EB24897F3F30
+:10BF5000E8DBDB17C60F30EDE79370FC058C8FDF55
+:10BF60002E09B86E4E26BC7D5AB6A96E2C946DBBB8
+:10BF70002ACB19C8F19300D62CA0EF8576A660399C
+:10BF8000AB66BB99E834A87ED2A6E917E267A5B3F1
+:10BF90002E77AD2FC0BAC6FFB0EE8521B5B30EFF28
+:10BFA0002EDE62ACEBE0457650E4BC12DA487495C4
+:10BFB000CDE1A3C1CB97CDE127E055765E099ABAD2
+:10BFC00011BC42280792250FC1A1E2BC1296619CC8
+:10BFD0000A8023B260C5AE8733104E8BB7D8DC9F82
+:10BFE000E8BE5BD99062A8573765B93FD1E9D10B5C
+:10BFF000079F76E1FA97669ADC9F807C3BB3CC97EB
+:10C00000F609A0ECDCB289546AF451D990E37618B1
+:10C01000C631D62FD44B131B487F7A92670C494CFC
+:10C02000674B33CDEE4F80554F6FE1FAF6F432ABEC
+:10C030001BBF736699DBCDBF9B49A506AF25B576BF
+:10C040006AAFCD2FD1B8FFECF931D6C84E58519E0A
+:10C05000C3BBBCC4ED13F293F25733F149B3FA05F5
+:10C06000D28D15FEFDC6447444756DDCEA06396850
+:10C07000B91E9F6F337C0FFA79FEA2D32F89F95630
+:10C08000617FD1D1E5FD3800F1A995F01C801193B5
+:10C0900061BC76C5B106EDA8C9827EAAB11DC88370
+:10C0A0004A6B9B39008FCE36727C24FACEE9655BF1
+:10C0B000B251AE5558EBCD28AC2A1A0696213F9DB9
+:10C0C0006D5C9981FA65B17CE1BBFE38FD7FACF116
+:10C0D0006D488D18F56548CC13C635F0197374ACEE
+:10C0E0001BEA674CF02947D7711F97B8DEA9DA76AB
+:10C0F00064C258987F55D37933CE63B214785C4AC2
+:10C10000EF5CBF84EB8771166D39467CFEA91AEC93
+:10C11000FFBD9C2BC0B3CB3C1D997F49D2CD2F08CE
+:10C120008624F0EBDDA305BF32CFED1F007F9E7AA2
+:10C1300043658FC03CD8656805EF7B8BB7F730BF90
+:10C140000BE17577E362923FA750FEA01E66F5856E
+:10C15000481F67996922AEEF2C7BCB355C07BF7D0A
+:10C160009259C0074C59900716FA14C12D0BF5804F
+:10C17000A5A2AE551E8ACF95A0904BD237244F4230
+:10C1800012E9890AFE3CC8ACCB691D6BB83C0AC2F7
+:10C190003F58BFB7DE289F16AC33D6E7B369190AFC
+:10C1A000C897F93F576144906F7AF907F07B46E2F0
+:10C1B0007A7701ABA973C3FC9F30039E60FE77BB07
+:10C1C00099920DEBAB7CF189C2B9507F4DE27AECCC
+:10C1D000F432987E7F182795AF7F516DC8ECCBEF76
+:10C1E000BABE138DC36F1BCB683C9293C1459AFEB8
+:10C1F000651EA590A42518B989D79FDD28FB6C2E54
+:10C200006C07CF75F279DE1AE3FAAEB6FED8F532D6
+:10C21000F633A2B7455B6E614867DA7A347C69EB26
+:10C2200051B748BE501C3E6813F4AAC9B588809F18
+:10C2300066777C1E53BF1453FF26A6AED1B72AF8EB
+:10C240001BE8FE736924F2736402A79336AED744E9
+:10C250003B7367BB4B576A6711FC02EDBEB9523B9B
+:10C260005BE7788A29BD6BBBCA179F7D2108F4BDA7
+:10C27000E8B95FB818D0E329A53EC30BCF976C5E31
+:10C28000ED42387DAA045D4837A742F2C478F01A1F
+:10C290006392347BC32101DEAB34FA2F5A3E05F59D
+:10C2A000FB179B55F7238097EA2D96B005F05DD5D7
+:10C2B000B8B09C0DA5FA315EFFE179A48FEA26F5AE
+:10C2C000B81EAF8BFEEB17191E27E121DB84363039
+:10C2D0000B673328AB36FD7902DAD1D52C42F41C3A
+:10C2E000DB0FBF8FAE1DC8EBB9E6E4AEEF35BFB1D3
+:10C2F0009A3F62D58D3F3A8F7E6335538EEBE9A826
+:10C30000026919ECBC41266737F417D828360AE5CC
+:10C310008A0607164A27B9BCF299C7871E83799CFB
+:10C32000D9F4864BD2C1072C2482CB8586791FA7EE
+:10C330005D412F9C03FA64FDF5FD42D4CFD3041375
+:10C34000E80ED5665E2E51C3AEB100CF251B542F2B
+:10C3500050265BF2ECD3FFF96BE03BF6BEC5DB0F7A
+:10C36000E0BDF8D903EFDE00F5C5DBD56EE57C193D
+:10C370000E29A3131FD5F02FC66534F82FDA79C024
+:10C38000EC19C29F7F3FB5130F8BB7EF35B3215D1B
+:10C39000E156DAB0D7DCE688838F866313D09E59E6
+:10C3A000F9CC9766C4F7A9DD12EB9ED3B57FC5869D
+:10C3B0000364BF209C087F023F1DF8EA82A7F09427
+:10C3C0009747503B37CAEB447872A2AE1E4974FCC3
+:10C3D000DB97E1FB157FB47871FD15BFBDDF85EB01
+:10C3E00038A9D4707A7E6275860FBE5BA10633DCF5
+:10C3F00054F2E7154F3E4874B6E0C8836497017D58
+:10C400006499486704B3707DF7AEBF95D6379F0532
+:10C4100088DE2A9E90FD2194030A9BB83D0E3F3C86
+:10C4200027F8E1E4469094B0BE93281FD1CE7D4B0F
+:10C4300016F2F13EB2231F146B054B86EA9F5B395F
+:10C440009EEA4C262D2E6735D0E9A61F921C3DDDB5
+:10C45000CBD7DD9D4F70D0E426C953F9C8F8EE1C48
+:10C460003F5CFE523FA0BB527C8EED5B559F6DA89A
+:10C47000A19F9097FCFB0F88EFC3BCED687F9CCC1D
+:10C48000E07A22767D7F3469F211F4AB8EBE747C43
+:10C49000CDF97CD3C39CAF353E0FDD3211DFFFF504
+:10C4A0006DCE3FD80FF50FCC2BDC9DDEEF9D21919B
+:10C4B0001CB0B0703C7EDEA40A7E36BE07094DF685
+:10C4C0001BCC5B9192F57402E3A712FCC92E99FF75
+:10C4D00073E8A7B3A7ABF17BD4CEDCF93CA7936F8D
+:10C4E0001708FEDF8AFC9FD4C9FF6C7DFA35F96717
+:10C4F0004BD4D07FFE1AF915F833E8417E55FDB8CC
+:10C50000EECFB6ED7FF74EA0EBCF1A343E35CACD55
+:10C51000583EADD8F12043FA8CE5D3CF7AD6B0B8E7
+:10C520007C0ACFE3F269CFB6FF11B9A9C1ED480C7F
+:10C53000DC400E3EF5B22731FC62E560B5C9135709
+:10C540000EC2EF6D56D895EE347AD3E86CD16F2ACF
+:10C55000FBA0BCE9A0478DDE3AE851A3B7D8751A15
+:10C56000E116FB7E3DCA1B9D7DA0AE604127E039F0
+:10C57000B24B263FB1DD1371A5C27757DBD81CB48F
+:10C58000B3DBDDA29EC2EB9174731DCA05ED79C4C5
+:10C59000C6E30DEDFE882B45673F1F6B965D1E7849
+:10C5A000DF166213E3D9D52071E9FB6D2CD1FBE5D1
+:10C5B00004BFF1B2A377ED08F4AB642FDA6EF72C69
+:10C5C000BFDD85218BF6E6BCA933E1F9BDAFC91407
+:10C5D000D368B7BB86E2BCC06F57B200BEF3049EFF
+:10C5E0003F65C15F16C1BAE63573BBF89EB54678A4
+:10C5F000CC773C60463903F667271DE8E845DB2722
+:10C60000A8586F7CBF88AD257C2D8AA19F80F077CC
+:10C61000B264413FC3D830E16F9870BCA5424E8DE3
+:10C6200097F3A7CE04B8B71F949905EA179A6556F1
+:10C6300087EBDC268518F271309DE8B00AE403D35D
+:10C64000F9856790CECC89F9F7CCF31F157E0F9A48
+:10C650002C79E183A1FF01E59917DEEFFF0AD65F90
+:10C660007CAFF707AC6BFBD2DD5FCD46F9DEBEDBFE
+:10C67000C2284EB2FB77BDBF87F5972D5E8A73AC9B
+:10C68000B0F0F8D46E67A81FBEEF05F8467DB9EB91
+:10C69000CBA16DA46F56119ECA64EE475C68FEDBA9
+:10C6A0009FA46E58C2AA508FEE4E22FBBAFA655B69
+:10C6B000089DCEF65D5F16061CFFBCF554995980A7
+:10C6C000E8CFC966EE407A4D01C4C1F7AB5F19F3FC
+:10C6D000F472F87E65E35EF33C785FBAE7EBA1287D
+:10C6E00057DA7770FBE09CDAF624F3323655FEC554
+:10C6F0007215F0750E6DB51E2097E4778B838E78DA
+:10C7000070E170680738E0BA002E15280F13C16376
+:10C71000FEBF2C3CCECFC6EF2F691EC5E41C3D5C8E
+:10C72000241F7FEE0C59255A3F7FBEFBCBA12877F3
+:10C730003F6B584EFAFB6AEB5E8DEB4EFF7F69DD77
+:10C7400052F85AD6BDE95F76DD9CFE07C95C1FC56D
+:10C75000F241573A7FF1BB54FFADD34BF3BD46FED8
+:10C760006FF9975DFF3F88F71D12EDC75D0DEF274D
+:10C77000FE65D77D35BCBF26F0EE7463BCB77DD7B0
+:10C78000D7BD996EFD575BB749F957956F575EB79F
+:10C7900066F7B49A6ADC23607EEFB3FA5B73A0FCA1
+:10C7A000BDEF623774478107FCF1FC860285FB0D03
+:10C7B000168C3361C35B252D5ED46AD8C7ED594111
+:10C7C00076C614DF8FC93E604A4D6B31B46F2D9928
+:10C7D000E77D845A141C0D607DC6385137FA536FBB
+:10C7E0004ACC27811D3BA564D241B4EFA6FA64B2BE
+:10C7F000FFA024BBEF9DDE13F8F3D1463FE28E1875
+:10C800003FE0F699C6F7B78AF16E634BDD23005E11
+:10C81000B7F554DC2100D11DC5352AAEE78EBB2407
+:10C8200056AF8B57DE1A339E4B61224EF28FC1EF0B
+:10C830009E0EF82D2578B062D9BB995D03FC188750
+:10C8400077EB8C61218CC330C5CBE1775BA597E298
+:10C85000A0C2CF54457FD5B1A615F9566546FF5203
+:10C86000F31313C19909BF93C6C9ED84BBEA93C9F9
+:10C87000EFD48D47F0D0F0F1F7E241C3DF7F171F0F
+:10C8800085888F38FB670BADD65B71FFC23A4022BB
+:10C89000BF7DEA5A99F260ACF912C1D13F5AA5FDA9
+:10C8A0009D3F9BFC856838970F1F55F5101FD68B51
+:10C8B000F05928E0389FD590DDC92E7FF34D11EE59
+:10C8C0001B1184E0BD8FB1C9E087CC2F92C276588E
+:10C8D000FF028505930B30AE29B1E3FAB866C8585C
+:10C8E000C7DFB7323AC7B95AFB44F2E19F5D7E0C0D
+:10C8F000F2E8785FF057B054E8F38ADE4F9CD3CC6F
+:10C90000E158BD440AE5121D8555BF6E5FE77D41C4
+:10C91000D71F7F7F38C9B9E29F0E4926FFD53788D8
+:10C92000ECFD6A61EF5F087A92315E73A1392F19CD
+:10C93000E331170E96BAF472512B8F083FF20FCBEA
+:10C94000AC54B69749F532FA5B2C3285F470998D68
+:10C95000A1DC89EDF792A2C55D6ACC1497879F5C34
+:10C960008878E4BF05D035395587B7B5934F29434B
+:10C97000BBE2017FC775FB24FF5DF8A2DF8A703D33
+:10C98000626B9BE08FB3DE3704FCCAF77D65C63867
+:10C99000C1B4E61C15E132AD4C36E4DDEC57843F02
+:10C9A000359C0DC77995EFBBC93506F17250F6DAA3
+:10C9B00000BED5CDE7CD8138FB6DB1F0C4F1312E8D
+:10C9C0007C42F5CE47789EF8B18D05811F0E8BFD18
+:10C9D0001F78E543F90543F9303EF6B6C2F7150670
+:10C9E000AA3C2E3EBDBC584D87EFE637BA87A18AD8
+:10C9F000E921DA0F543DF43E5BF4D3DAF558C2DB9B
+:10CA00001D33BBABE2AD7FB299AF7F01F37E77B44C
+:10CA1000F4AF87B7E29F3AC325A8DFCB2492235D0A
+:10CA2000E99A117F5C98288550FFA21F4BF5728907
+:10CA3000F4FF612DFF601AD7971ADDC7C25952392A
+:10CA40009CB5EFE7A89C9ECD2A878F06670DBEB1E7
+:10CA5000F3D5DA83BCBA511F5F99DA34ECB7689F1B
+:10CA600054354B6E0CFD55296D66E4C3EAA6475557
+:10CA7000DC2FB8C3C3C7658A7FA87EBF76A0AAD0C3
+:10CA80007CF6178C25FBF1E25A6E1FFBEE39EF4264
+:10CA90003BE8B0C9FBFBB1C88F6FCA944F90088EBA
+:10CAA0001F2CDB32A34CD18F9B43F39CBEA458C5F3
+:10CAB00070D07796EC55BBEBE869A09A4AEFB5E7E2
+:10CAC0003D96780AF0397C8FE611FC8985611E4716
+:10CAD0007E436B4912BCFF4E4D0AA7C38A86BD66D2
+:10CAE000AAE7507BED7BDA7762F969467992A13E3D
+:10CAF000AFB4AD27C2A5DC127EC01B874E5B546D60
+:10CB00009FE4EFD4133EA0DBA1FF3FE889F3137C41
+:10CB100071E0F698DA453F748FA71F962EF7744799
+:10CB2000F82FDD95D71D9963E96BE333E2E9877749
+:10CB300096F1FDC0F7409E61D93E03F4C3F53AFD7E
+:10CB400030C346F411DBEF07EA35EA070D5FFFC398
+:10CB500072E61DD40F71F8BA5E35EA87DB9AE79268
+:10CB60007EB86D86CC3CBA78DC0F55B1CF95503F7E
+:10CB70001467DC4175D59B14876EDE117E09C215E2
+:10CB80004BFC0EEA893D42EEC7EA8B44F27C9A598F
+:10CB900012FBD55791E7FF97E0ACC9F3A5E0BFA022
+:10CBA0001DD8950E19C9EBA577803C97901EB93C0E
+:10CBB0005F7A97884BC6C8573FCAD7117AF9CAFB24
+:10CBC0005705B83EA86ECA797C16BCBFB35EF55A4D
+:10CBD000A1FD9D9DF2B6502F6FF708790B70EEED19
+:10CBE0008E83DF99B39298C728AFFAA29C3A31ECB2
+:10CBF00077F93B91EE0FCBB48FF867A1C70F0DFB10
+:10CC0000DD088C9F77332B443F7F16F2EBDCB2D0EC
+:10CC10008C32E0E3D27BB83D5CB94D263854357296
+:10CC20003BAFAAAF3DE481FA8482AF683F70F12E3A
+:10CC3000BE1F08802A2FD6E171F1E1B6BA6C7CBF25
+:10CC400041A2FDCCF9DEC514C767EB789CD80AFF7A
+:10CC5000F0BC0E1FC5912B05BC16366FA078F3C231
+:10CC600090310E5DD9F7E653E80F68F277F19698A8
+:10CC7000F7DE8769BFA212E3CD3A3F4416F6C3BD83
+:10CC800072387F27E676FE9EFB55B1F8D7DA75AC91
+:10CC9000BFE2BFB9FE23B0FE11FFFCF55FEBBA5552
+:10CCA000B3E0F7023602F9E3CF261FF17BF07558A7
+:10CCB0003F7CE79E47FB75D7E719A509BE3C6C0A88
+:10CCC000D46561BB2A89DA2D58BFFD4006D467358B
+:10CCD000B06118A65FB0CEA8173BF470A387F4EC40
+:10CCE000AC9AEDD2DDF9086F56837436AFC012C02E
+:10CCF000FDD423B608C92F8DEEC699393D8F15DFB7
+:10CD00003DD12352467E4493E426BE08DBB85F0142
+:10CD1000F0B7417DFF982F270878533CA6BA89E3E6
+:10CD2000A71AF0817C35A159D4B7703BEC3BA06FBA
+:10CD3000683FAC79AF8AFD2AA07D1AC99B41867DE8
+:10CD40002EDC9F2BCED0E16DD7314EB79B252F8B9C
+:10CD500083B701F04F5CBCFD93E85583C738B3B08F
+:10CD6000E705FE8ED85ACB87D33E94E4DD888D9BB1
+:10CD700053681FE593FA3CC2E32441BFB1748DF6BA
+:10CD8000BD47174FBA05270EF2954DB4519E1B7D36
+:10CD90003797DB3F7A7912EB3757B356B263264B9E
+:10CDA000818F145D5EDB6D22FF44DBA7D5B57B5C14
+:10CDB000BD423B96E936A19CBC5FCBB7C4FCE10CFD
+:10CDC000CA5BA2DFFE5E85EFCD82F55E5C237B71E0
+:10CDD000FFE77693E7DD22E4DF4754867479F1902C
+:10CDE000EAE3766712C9DDB9874FA8180A990B30B4
+:10CDF000417CCFFD0197AF27703078F647D05B3E7E
+:10CE0000DCAB670D23317F788677EF780FE0E5D6CE
+:10CE1000114756E33EDCF452F7BBEF227C1F961914
+:10CE2000C2F7F89A52F24FEEBF4F22BA3E0A70C4D0
+:10CE3000FEB7CEC879F75DF8EE5D6BD2695F6D968F
+:10CE4000EFC078A4B379539D0EDC5F9B344066013C
+:10CE50001D1CEF62ADAB515ECFAAB9EF569C6F05BA
+:10CE6000E8018CB356341F19DF1DEBEB25AF07C665
+:10CE7000AF0E06CCDD0185ADEBCE9B31DE311FDA86
+:10CE8000217AAAD7F376D59B24AF0DE9B1F9519257
+:10CE90003BF33749CC8DEDC1DEB3F271435618B781
+:10CEA000753DF487FA02EC8FE36E4AB90DF7D1AA0B
+:10CEB0000FC9BCFFE8E5AFA25C9A0FFDE0356BDD62
+:10CEC000741F8DB770BDC43261BC8AD1393F198DD2
+:10CED000E31D52BDF8FEBDBDBF32E3BC67C3F7B270
+:10CEE00060FC7972DB786CCFBE27B93753BC89E719
+:10CEF000C9B60B3E606F6771FE92445DD8819A3E61
+:10CF0000FC833997E8697EEDF23A5C575B303D0768
+:10CF10005DA0EAA6F366B4EB3E013807C06E3B2184
+:10CF2000F2D8F6074F98DB74722A62CEA3FEF7346C
+:10CF300015137FDFCBFCB4DF1D58CEF5F0B1D5B6AD
+:10CF40009084F687EA263DB97FF575BFC4F59F7BCF
+:10CF500056A5FDD173BDDA281E7B72BDCA8230C7CB
+:10CF600095EB65921B27B7F13890FC844AF5050FC5
+:10CF70009AA9BE7FFDF409280F4F02FC910E4B9F2A
+:10CF8000186FC6FA0290EB9638F263BE67119717D6
+:10CF900031F261C13A23FF7791170F4CE0F23D4621
+:10CFA0001E54F6ACA3385FAC9CA8660E4D3E1460D0
+:10CFB000BD359C45F45B75486568CF5529EED9EBC6
+:10CFC000906E66D970A718F8227C00E5DAC590E467
+:10CFD00009C2FBEFCC796924C2EF2F086FE48BB54F
+:10CFE00069B49F3A3F3497E0AAE5132E5867A467C7
+:10CFF0002D7FE98E80CC7C7A3D5091C47CBA76EF4F
+:10D00000FD00E812BE37A7490AD924AC1F7BF5C141
+:10D01000115477231D56D50A7DBAD64974FBDEBF5D
+:10D020009D5F8D7439FBFB12CD9F050375A857AA30
+:10D03000D6491E8C632EF83EEFBF00FA23BDBCF725
+:10D040002B4E3F40C71EA4F3AAF58FBE4AED3749C9
+:10D050001E1CFFBD0D7349FF56046546EF371D23A7
+:10D06000FB18F400E501ED0FCA1948E755AB2C6E2B
+:10D07000C4A3462F1AFD1D53C53901AB77E874E8E8
+:10D08000B7C1ECA175C7D29D3C3387E8AB7A9B4A08
+:10D09000F4511DE4F474EC5999E870FFEADB897EE1
+:10D0A000CE6D9612D05FA9390BE92FC4DF77D0DFA0
+:10D0B0003392A03F4ED7271FE0F4588AEF91FE9E8F
+:10D0C00017F629630EBDDDA1D19F464F57A3BB2E96
+:10D0D0007A2901BD816D7C1BCEEBFED5369A77692E
+:10D0E000DD4BB7D512DFA8B43F5F5AF76F19C8A759
+:10D0F000F3159E87A1C1B152E1793A5DE6F1F3E5FE
+:10D10000E6AC6B994FCC3CF676EAC502D48B9857C7
+:10D110001286EFFC6EDBD394BF7676EB31CA4B5CA4
+:10D12000FC0AE01DDA9FDBE66461B2A743245F16C8
+:10D1300035CA9417CA9470E174DDF9112DDF62F1DC
+:10D14000734E82EFA21D965039F45FF4C289A1B4E8
+:10D150001FBE22F22AF24F70ABC4E3F2C1B6A1D3D4
+:10D1600031AF52E1791FB17A778C85C76BCEBC9411
+:10D170003413ED1F69CB5EDA4F5AD470BB6AD1C548
+:10D1800027BD1695BE0BED689F260878C77D449C89
+:10D19000DF2D43F4F35BCEC77B86F3CDA22695EC5F
+:10D1A000A2455B36505CAF7ACB79CA7B2D7DEE59B8
+:10D1B00017C2A1BA4936E6436D91C316CAD7928FFA
+:10D1C00059B87C32E4255535F27319550D22EF27F5
+:10D1D000262F66F173BB5E08026816EFFC2F17F26C
+:10D1E000D1E9D6CD2E84278C47F944534727C83739
+:10D1F000BA5A9E51C3C371F38C4EE37F0081CCB603
+:10D2000018F333D9162EA700EB85FE38F14CCD5E0E
+:10D2100059FCECE74F62DEEB991D9F3D89F35EF20E
+:10D22000BF2E3E89791B6CB7CD8DF643F5D6772896
+:10D230007F50EB576B11FECF33FF457997E7DEB791
+:10D2400090FD776ED7C9DE681F9CDBFE5506E6535E
+:10D250003EB06B3CC51F1E78BEB43B8BE3DF6A2536
+:10D26000D265E81AF23E63F1B0BF510E3B609E6793
+:10D270008F5A88BF3BF2C51A2A79FE9D47E4896D13
+:10D280008B9F57ABE53755354E9F3A0EE55B23D75D
+:10D29000E31DF94E57CB0F7B1BF079FD35E06D9BFD
+:10D2A000C8FF8BC1DB59FC0FC0CF2F2CC6FCB0CF01
+:10D2B0001BEF7DEAD7F8AE31FE79328D8FAF062FA6
+:10D2C0002D6F779EC517B220DFECF80DE5E121BE8A
+:10D2D000CA3DA8E73FEF8D71CB4FD508C50323BBEF
+:10D2E0002C6ECCDB5AB4EB3DE28F73CF1FA1BC5840
+:10D2F00026F267CFB18E1FCF77143189EA4D4E9E4B
+:10D300005726E08E79671E173D17F9659C6EB5BCF0
+:10D31000B344F966EF5872C5B90B9E1757E96935E2
+:10D3200023FCF57968D268C4D33143FE9EB6EED8AB
+:10D33000F1DC088751FABCC944F97CC21EEFC01366
+:10D3400097C3E736883CCA8EFC48C67A1660BE0F83
+:10D35000D777D521E93D16871FB5BCC9D6587E0CB5
+:10D360005D5BBEE4D5E7FB8FC163BF85C79F34B863
+:10D370009CB91C5F1E7F26F81BFC92D316DDB99466
+:10D3800039C22FD1F2C8B4F9D63570BD7B660BB760
+:10D390000B63F9B94AC4DB63BFF395F84E55D3DE8E
+:10D3A000A12877CEEC7B49D01BA7E7AA6DC7CC415B
+:10D3B000219F437AF98CE3C59127B2958F077E6C44
+:10D3C000DCF1AAB79D8F3BDE69C5773BCEFF742B9E
+:10D3D000B7334E37C8134371C63F2BF44FC7BA9DBE
+:10D3E00066F2AB64979DE4CF03CED14793BB6169EE
+:10D3F000A6FC8595CB45BEC30FBC9908E795CE9B8F
+:10D4000019CE6735C247E767AAEE00433B47CDF424
+:10D410008F40FF499BAFF6DEDCCDC4427AFC2BC1C6
+:10D420009E18779D92FBA582FAA57599F15C47AB92
+:10D43000E23E9006E3B596495EB467BBD29971FCB3
+:10D440005B7CB2211E86B1675CD705AF89F0E934F9
+:10D4500085DDD084396DAD99E4C8799847C9A09429
+:10D460006EDADF7E64D9965E78CECAC5BC12BE770E
+:10D470007A3BCEB7D078C92C36CF9ABDDDB790892C
+:10D4800023C0F8DEBD17E312F6016C009EDF713396
+:10D49000BB17EF57784C9C7B5CEB0C90BE4DC837AC
+:10D4A0005E7EEE458B13258F560CE762527CC67A62
+:10D4B0005ACC39484D5ED3113A80FF0471EF43CA0C
+:10D4C00078BE7E8C57F5CBE89C6F4A3AF386F1FD27
+:10D4D0006407E5333B1C7C7EDA7C613E240F004C04
+:10D4E0007C3EF96D41B4C3615E317CCCE8DC13CC89
+:10D4F000EF78CCFC0C76DC1D56A11F14A6A01C7185
+:10D50000585B9980F305639E699061DE4172075C08
+:10D51000E13D8C93234DB560DE821BBDE03CFA5E9D
+:10D520004CBF9E6EFD79B1EB85DE28CA64F974AEFE
+:10D53000B0B91BC9ADDCDA127602EA523DA78FBE44
+:10D540006B19D17DDF88C8635965277B4CBB774059
+:10D550005258502DE8A43780C80A3C17AAAC019A4B
+:10D56000817ECD9112D3BD00D4067C05E3DF6BF53F
+:10D570003D68857675B704324DC37039C5AB5A8A9C
+:10D58000E814EF408C309996FB5A0EF62251C3D81E
+:10D590000DF8DED782B45AAFD54120E27D0BF5F607
+:10D5A0008EBACF0A72B23E97D757AEF1AD5A03E3A7
+:10D5B000C94EFF4A2BF2B1D53D88F62FC2D776EE81
+:10D5C0005D9BE7804DE1523B4CE2E6080014F0DF42
+:10D5D0000F7990ECE4563312C96687560F931DED10
+:10D5E0006F3C427E7965C3117A6FC23A947DD2C294
+:10D5F000A5D9B0CE8DD65BCA3207C2788D73334DB4
+:10D6000020A27F63BDA54549D7C3E156031C9415ED
+:10D61000D35B0E8ED3C3617A0BEAEB6B85C36FD6F7
+:10D620004C5FB5A6E7B5AF3BCBE6DF8A7899546C83
+:10D63000223935EAA883FC35F8D9283E25C6D99089
+:10D64000E0DCA3668F6BED343A4A442779CC3D8801
+:10D65000EB1723BDD4637E37C6EF02016FD9F04EBE
+:10D660003A65EEC0703C9F9E65BB3B6CD5C5F52608
+:10D67000152F9573613E943303CFD36B83B6FE4071
+:10D68000A7E93E13E52367D90207705DAE99913093
+:10D69000E6EA8C6281FBA5BC4E7AD7BE53B78BFB02
+:10D6A000A975734DA115240FDA245C7727DEDB62A0
+:10D6B000F01EE1786F3A4678AF6A3EC6F1DEB4BC40
+:10D6C000C42EF637D00FAC67916188CF0FD6549631
+:10D6D0002940D77D922275480F2A5B5C566E23B88D
+:10D6E000BF8FEBE90277313F0DFE89F0567F30F7AF
+:10D6F00047F9E8271D32D17E8606AF8E76369E77B3
+:10D70000B7C71EF80B7EA77A74DBAB28DE771C7CCC
+:10D710008BF6D55D87A6EDC5FEAE1980094FE7777C
+:10D72000EB0FAD2841FAAF8F50580DE44C248876AA
+:10D7300047627870BEE88047E331828F09EBF07C66
+:10D74000AB389752D424F950EFF64902BB04CAAF64
+:10D75000ACDC2F74DA645A8FD3C6F57BFAA17D3224
+:10D76000FA1945AB4CD43E1DCB7CFDFA57897E8A15
+:10D7700021CF4CC3A74647403849B7C09CC72407B0
+:10D78000CCB6917ABA494DCA85F7A35AEEBE1FF5B9
+:10D790009BD6EF27CB98F71EDDF972A09F13067A70
+:10D7A0001BA2DA106E5A7BA44B7F9C7B17A05F37BD
+:10D7B0005B3AFF0EC655B7B72C95E99CE235E2B54A
+:10D7C000D0C26A70FE8549AC6607F42F4C8612EB16
+:10D7D00069A2DE5DD4B345D9473C1FCCEB791F7AF3
+:10D7E0004D9203E3343C6E38D426F67315F720E4EB
+:10D7F000A3A1361E1F2FCAB493FCD7F8550170E2BF
+:10D800007EA322F61D7323B926C4A3C6BF4AC4143F
+:10D8100076821ECC553C26DC7F7E7D19C041492C8A
+:10D820005F6E1EC8CF8FC53E1F6B3319CE83FB3A88
+:10D83000CF778E453C555ADB7E320DDE560DBC4807
+:10D84000FB3F2B92AAC65EE91C78EC3C5EBFFCBB9A
+:10D8500024A4AFE6A825EE799107C4FA0F2E9B49C0
+:10D86000FD1ED6CE8308BBE55B249AA0ECCBE34734
+:10D870008596A0928AFA2F89C73B0A93B87E64DD09
+:10D8800073E89E8C42EC8BC2FABA4194B752981658
+:10D890002AA7FAE03CC6F33E75F98516D6615F11FA
+:10D8A000CA73119F819578AE86C93934FE8DCC68D4
+:10D8B0004F1566D7ECA7F7961CDA8762516EDF68C2
+:10D8C000F6D078B1BF52D8A7BE8CE699CCC72966EE
+:10D8D000C6F3C385D70515BCE782E5E5D0BC4AADE4
+:10D8E00031EF07F3FB45B4758CEF6247D57BF19EB2
+:10D8F000914903E67ACBC4F38BF06F1F0B9B734BFC
+:10D900007EA77CBFC97387B7CC607FD47B910FDFC4
+:10D91000F85A9E136F1FFCB0E0FB83CBFC5EDC6FFC
+:10D920007CCE06F800BFBBC423AD727AAE0EBF58E2
+:10D93000BCC5C2EF5BCDF3C97E8B855BF187DEB2E0
+:10D94000544F5738C5C2653CAB1F40F7D70838C79E
+:10D95000C2E5752BA787D7F32D21F42F5E5700CE94
+:10D9600080AFD73D12F91B85E27E0D20724E2F1A33
+:10D97000FD24E5707A4936C23D16BEB1F0D4E4C04C
+:10D98000AB082FCA2FF1958FCFE85C7F61F79A968D
+:10D99000141DBD68EB2FCC1674BAA73F9F8726379E
+:10D9A000AE137244C80FCD5E1E2FC6037B99ECE107
+:10D9B000D27427C5654B2BF938A5FD1C1B31BF81DF
+:10D9C000856FA47CD942267E516EDF823DCAE9B3C1
+:10D9D00079C229F4AFFB5802AB9C18879052685F5C
+:10D9E00009E07E3C06EEC78D7037DAC9B170780E5B
+:10D9F000FF634C577869F4D6621376750FD613ED32
+:10DA0000DEA12F8D4846F9CD9A53E3FAE9A38EFAA9
+:10DA10003BC611744B7429B140C77337D041D380D2
+:10DA2000D58FA13933D65A2F23FD8D65BE34BCCF97
+:10DA3000049364719EDABC864BFE77509E8D699B81
+:10DA400098A6BFDF44FBBE06E77102CEE358702FF5
+:10DA5000C651C631E5AFFA788336DE9F6C22DE9080
+:10DA6000CDB2713D45B83990DE399EB6BE3E792CB7
+:10DA70004CF7DF48563AA707FF0B9A533BBFA7E581
+:10DA80003F4F724EFBD44672B886F13C9F3021B1B5
+:10DA900048BC2F12F78CB18892E85E29F64D52E708
+:10DAA000FCBEB0490ADD9321E677768B3588F946CE
+:10DAB0000F49814BF89D33D2A1A1C4AF4AB83FDDD5
+:10DAC0003311F3FE62534B15BE8776F3A99D58D7E9
+:10DAD0006299C77923BB2C749F4F42FBD30AAA4B90
+:10DAE00027078AEC5C8E8CC7785F1EC90B05CBDDDF
+:10DAF000E779DE7871538182DF397081E759973099
+:10DB00009F827ED78D51A3BF76553A75C7C66FC425
+:10DB1000BD444AA437C255B3CBF2ED81EE76C0D7EF
+:10DB20002A21DF9ACF4FF020BE360E1879F37468A1
+:10DB3000923B70F834342B4CD65615F5DD5D82AE31
+:10DB400046235D4964F56874E5B1A31DBD2686AE24
+:10DB5000DCA9063F6E160BD381C7A21AF592C11F2E
+:10DB6000147648AC7DDE6997D7C7F5E7580B38A81F
+:10DB7000403FB3057C57A5988328B794FB78BECF68
+:10DB80005D8CF5C63CA0BB6A5483FF393B4521FC44
+:10DB9000CD5E6EA33C4FBC376A2ED403F09CCE35CD
+:10DBA0000CE0F74875E0B356D71FE9C09141743BCC
+:10DBB0005BEC87FF49E27EF8EC944FD2C9690FAA6B
+:10DBC00017F4F419FBFD84E3C6F45B25F178CE2A43
+:10DBD000D597E9D5D91B13EDDC7EBAE02E5B67BA89
+:10DBE000C2FD06016B8F7C45771F505B8A7566BC52
+:10DBF0007B24B4F1347BAF28C0FDF044E3F68D9470
+:10DC0000911D66FA795846FBBA6F84913D5C14F118
+:10DC100099E619EC72EE8F76B1CBF13E03A82F692D
+:10DC2000DCCBEDF286E564DF2F01FB1EE5F906DCB7
+:10DC3000F3ECC1F884F2C95EEFF02B31BFA5A84127
+:10DC4000EAF03B15C07B5E3D6FBFEA9171EAC30A03
+:10DC5000FA85814CD58BE18192D556F073EA7298A2
+:10DC60008D819FB3C25E327E2DFAA5A93E89A55053
+:10DC70007DB523EBDAFDD855F6E2D5E8C726F227C5
+:10DC8000ABED1E825F227F5276FA57D975710090F4
+:10DC90008B71ED8F49CE9235D84E93170F9BC27979
+:10DCA0003FED46F941945F7173EDDD64EF4FAEAD2A
+:10DCB000F0E2956EEDFB2EF7C7FC8A2281EF5FD86C
+:10DCC000B93D599DC4ED48490AFC02F9B375C0D36A
+:10DCD0006B0B803F6635F1BC0DDB75977BD37D40C8
+:10DCE000239FFE79018CFF5144A1F842B393C79B57
+:10DCF0003F6212D9AB45472CFE46C0C365905076B3
+:10DD00009DDF729995519DF5CC309C0FFE88EDCD2D
+:10DD1000FB297C2758C3F3942ED4E42423DE9B559F
+:10DD200063FC77AB9DE7B76D15F4370BEF8D1C8E59
+:10DD3000EDC2D9787FCB2C25AC527E46D4CCEF39BE
+:10DD40008479E07C9A6DC67176DAB9DFB5D3CEED11
+:10DD5000F859E2DEC9665BEC380A1F5FDC33170B4B
+:10DD6000F7347BE98BB89ECBCCD744780279857A9F
+:10DD7000A16844CB51B417AEAE7F7C12EA9FEACBC8
+:10DD800052B80FC6A71B55F2DFCF8873E2671BF7A7
+:10DD900067DC0D65E5F63FB8D0DF7B4DE0E9ACD23E
+:10DDA0004AF7BC2C795EA67B0AE0BB19DFA1FEF323
+:10DDB0000AF9392B7E4E48D3CB055FEFCFF6F3E05F
+:10DDC000209DFBD1ECCE71D66008E7D7BC5C26B9AC
+:10DDD000017ADB70EFCF8DE2DE9F587BF463BB16D8
+:10DDE00067CEA0BC9F07DCFC3B89F8BF289ACA42DB
+:10DDF0003AF950A484659C7F5134838500BE670F37
+:10DE0000E63E568EF4CA546F3F1C56612D640F8B4C
+:10DE1000FD1BF8B5E0FD74BB45654FE3C5E96389BB
+:10DE2000F9DCAB06439B6F8503DDC83EC610686115
+:10DE3000A7DD7763D418578DB5934B9A87AD42937E
+:10DE4000F20C3E40FA8BF07B91BAD8CF910971ED7C
+:10DE500066C61E2538143C9F3709EF7B2978CDE430
+:10DE6000C6EFEE41BEC6787EE345BA8FA48A856FC1
+:10DE7000C3F7558DB23BCCAE14CF5AF5C68D308F5B
+:10DE80003D11C583FCBF27D2621D4A7513C5318A77
+:10DE90000E170D46BE6D8E2814FF2F3ADF92342FD9
+:10DEA000BFD37E69BE6CA2E77B2EEFA3E7DAB8CDC5
+:10DEB00091D4C1A88FB79BB83FDDF2EAA52494A7FF
+:10DEC0007B2E5F48E3F70F2DD7EE058AB59B092E11
+:10DED000A54EB923CEACB7D3995CF436E62B8D4F63
+:10DEE00056994C78E0FE6617FBE343B6CAC9BADA26
+:10DEF000212568D7C871EC914E781BECE7FE49C22A
+:10DF00007EECC50AF03EB7A6CB698BE95C677392DD
+:10DF10007B05C59DB8FDD0DE72FA6793F0F92199B3
+:10DF20009FEBBF2C133FEDDBBDB84F9B430FEF3A88
+:10DF3000C2DF1759E7CFBD02EDBF3860A77839536C
+:10DF4000BC83E3C5453AE3C4E11E7C7F2BD883DF65
+:10DF50003FC3E300DFEA8C0314258DE4F737A15AB1
+:10DF6000EABFFE9819E3287BECFE6F2511DF34240D
+:10DF7000A19CA8B073B9146425D96024B1E70F9AA5
+:10DF80004A904E462CF710BEB7AA604A215F6CE655
+:10DF90007EFB563C070AE32C6CA837E7E8F0BB5041
+:10DFA000EC377DAA067BA7EA9EFF3E89FBA59F1E54
+:10DFB00058F414E523BC6F61FDE2D89FA1242E071D
+:10DFC000779A8393B661BBE3263AE7D1F2EACBAF07
+:10DFD000F600FC2E3CEA1986F27F599287E0D57450
+:10DFE000686B5D0F68D7F4216A4930B937CD954D1C
+:10DFF000F0DD579887C7F3DE36D17C3BE29F6007A0
+:10E00000E27A7F20E6F3CA419361FFEA153BD76BC2
+:10E0100095492ABD9F97C4E3693B0E96A461FEE92A
+:10E020001E7B603EC2B3FA93B63A97A733FEA7D9D8
+:10E030008163DEDE316908FCE798332637A2CFF32F
+:10E04000F64619D7EBF994B114A96B7C0AC6AB411B
+:10E050003C68E3BD72868F07F3D887FC1659CEDC87
+:10E060009497C9FC3FCA87FA2BAD4A2AE62D6D1555
+:10E07000FBAA1A1EB4F568F3F03430DF0607B18648
+:10E080006FC795E2CC223F72B8909B5FDB7DC124C5
+:10E090001E07247BFBD30376B2BB768A7835CB9CF4
+:10E0A000DB07E1A7E169BD2863E793E8FB8F2771F0
+:10E0B000BDA1955B554F90E8E179AE6FB73AC3D6F5
+:10E0C0003C947F2FE551DD130C260DC53CA8A67EA0
+:10E0D0005EDCEFC3FCCF24DD3EEB3841E79E868853
+:10E0E00039478787C4728DC3BD837E9406A2ABA6D1
+:10E0F000A38CF86DD196FB787C11E481B8CF89F6BA
+:10E100008F912FC43E7296C44B17F2C998E60D2B1F
+:10E11000B33D74BE80F66D353878902FA0DC2DF0BD
+:10E120008270C1F72F89756BEF5F14F01B2FE72703
+:10E13000EBF31163CB3DCB3229A6A8D55F12F35F79
+:10E14000C81E253B74E1E57AB24F3D35BC5CF80052
+:10E150002FFBAF9F6BC6F8EFC275F1EFAD1B95C4F7
+:10E16000ED97B3820F98C9DE03F3393AF46312D7FF
+:10E17000AFA71A1FDB9F4DFA24F02AD2C70D4D8F8F
+:10E18000FE12C1A4D1FFA94D2AF5D7E488D6FF0D10
+:10E1900031FEF36F73FE19B3492DC17B8CC6049910
+:10E1A0001BE3E4AF6CDA2CA35C7F05F92387CB0D6E
+:10E1B000D4C79F1E7824E921A483632686F1F89DA5
+:10E1C0006656B15D87DF960D2F1AE4C1A22DCB27CD
+:10E1D000E138A3DA522594FF9A1CD0F0BDD3ECBDF0
+:10E1E00089E4C994187952C6FB47053C1F13F2E431
+:10E1F000B189204FE051CAA61409C7D9698E7FAFF3
+:10E20000D5671ADF097A1CDB29773FE372B7CD9512
+:10E2100007E3544DBE40F1D78EEF08BA7BAC4CA358
+:10E22000BB1C09E108F6BCA92FAE1BE083F40FF676
+:10E23000FC9C69F9C4A50715DAF711FB48226F8227
+:10E24000384CC7BF9A9CFBDA1EF81BF2496159CDC6
+:10E250004AF433D2CA8344D7A7A4409F54D057A7C7
+:10E2600090AFE3C885E3623D5FA8813EEE38EF3BA7
+:10E27000F988F5403EA8600113AE83AD97DCFAF350
+:10E280000F9EF59CDE521C92217F5CAB6BF0BA9125
+:10E2900075DC3398E248273D65C6BCCAFE21AEA7AF
+:10E2A000985442F4C84C37F7407E3BA532A29F53A6
+:10E2B0002017116E0BED463F445B574F07E7AB2F1E
+:10E2C00052F83AFE28F88E7CDC91D48EDB59C526B4
+:10E2D000DA8745FA207A9B924A7E0A38460AF17913
+:10E2E000C73E435896B83C90711E6EF4DF280EB4BA
+:10E2F00081E7856DDB40749332D14DE7191E53BC25
+:10E30000B6145D1CB765F3E3E437223DE11C12D17E
+:10E310006305D2238B438721A043E8973AB186F067
+:10E3200008F81DE5807153CA0232D24D2C7EB5FD2E
+:10E33000430D1E3B63F61BBFE7E07C3951949E04FE
+:10E3400079279D7AC2286F015FDFE6F8EAA46FC4DF
+:10E350009BC66FC31D57A6F39083DF075EF7D13CC2
+:10E36000CAF7D0F699B47D63EDFB77087A49B44FCC
+:10E3700094650BCC7418F6A396D27E97C627DADF85
+:10E38000A558BA99E7BD6DC73708F7167B487F5E79
+:10E39000CFAD301FE2B3C29143DFD3F0EBA935B369
+:10E3A000BEE02F7C9133B7055F7DBB35583E04D668
+:10E3B000B1DD1C9C3199EC6EEF4D38FE4DE526F732
+:10E3C0002312E60BB8258C771089235F1CE2DF61EE
+:10E3D0001EAF61DE4B05DC353C697048A4AF12E12D
+:10E3E0002724E0932EDEC7F275B983F373BEE35A98
+:10E3F000F93A2823DDBB586005DE3FCD8AB81CEA18
+:10E40000E0EB2246FB886BC578DA73AD1E87AFD789
+:10E410003A46EAF87A749B91AFC1C215FA94F82B88
+:10E420007D93CAF368059F7D61E3F3FD9583DB630C
+:10E43000E9A83F007FE941BE9FBA54D0195010E5CA
+:10E44000E5D56FB230C483C6F7AE19AC44C57D596B
+:10E45000D437D86A46E0E838DC8FCD347B707FF85B
+:10E46000941A213C9D0207B59EF0E9A73C935307FF
+:10E470006EE0F2607287FEF1E17E4FF08F3DF97E33
+:10E480008EDC4C74BD743C23FDD1B27914D141456E
+:10E4900079AE8474B6684B8A84EF53CBDC26592757
+:10E4A0001747D59A58DFE144B7CF3974727154B029
+:10E4B0004646B8F4490B64AA29603738E64CD0C701
+:10E4C0007F5E81BA3EFE03F5BABF27FEB37BED5DEA
+:10E4D0007518FF694FF235233EB26CFEDDF8FDC2C0
+:10E4E000EC1A99E9E4C5D5ECA66A113FFA70F5EB90
+:10E4F0009BE7C2BA673D1C598D6FE7607C7500E6EB
+:10E5000005F0F86A75F3118ABB360B7E1E2EF90FE3
+:10E51000E377EFAAB9C918678D5CDB77BB09BE65E5
+:10E520001F32827F377F8D8CF1084D2E7C807F8F4C
+:10E5300081FB8D12EEAB69FC807205ED4F2DBF01A2
+:10E54000E35ECED44EB98CF5649D5E5D5B6E8A7BD6
+:10E550005FED6987C3A0B73439C89AFFF6C243DAC2
+:10E56000BD995C2E9E76E8F4FE63E5C7E93C311365
+:10E57000F7D0DD2F7CC8A756787F7F5DB7CE73ECD0
+:10E58000C32CE620E64F82DBEB71EBF261A5662936
+:10E59000ECC43CCB4BE8B900FE2E99A87CEADFFD29
+:10E5A0001373D08F6F3279C112C03C09A2636F1F01
+:10E5B00046E71E1AC43E6CF17E874F1D81F7E65B6D
+:10E5C00049FEB5EFB50791AFDB9D268A1FB7ECB2C8
+:10E5D000105C2FF6B50BBF3A64F0BFB5FD0D9BA5DF
+:10E5E000EDAD22E8BFD1C6C7DDF8707FBA4F23D1A9
+:10E5F0007E77516D2EC5F3B4F8626EC463E2496153
+:10E600007C7C25C2685DDAFEF73ACCBF189138FFF2
+:10E61000A297D3ACF94B194EA4C3996DAFE2DC625B
+:10E62000FDAF8C43C7F7E23819B53C2CB0EED052A1
+:10E6300009D7B76E567CFF4BA39F7522CEA5CB732F
+:10E64000C873EAF5CADCD4A45C9DDCD4FAFD52E4BC
+:10E65000398C6AB97B27DA77C0D7694E1D5F4F1AAC
+:10E66000B2DA166FBFDD5FFB10C53F13D1BDDFC44B
+:10E67000EF5B8A7D3EDE29EC1825D283ECC03D5F3E
+:10E68000D83D71F21FFCBB4CF47741B4784CD7EF06
+:10E69000FF3BCDFF4667C7BE5E8F6BD9D78B9D779B
+:10E6A000ABCA7AC5D327B17993DAF7E2F4BF4B7FCF
+:10E6B000EF81DFCC02DB1D5DFB69F6AE5FE2F74E5A
+:10E6C000B18F18E9558D4E00EE7720BE861E9E371D
+:10E6D0001C43A9CC5A23A31CB8D8D4928D71AA4448
+:10E6E0007EA1361FF8F58B1767F1E3BD4A71D67727
+:10E6F000BFC0835FE5F6A7547CE03B382FFF79B3BA
+:10E70000A43F8731C72919F8498B83369F7F773813
+:10E71000C947359C1D0F7EB1FB96733068C5F51C4B
+:10E720008783804B5D312BB174A33801DBE841FF57
+:10E730008FCB494F2D23FEBE5EF2D1BA5738B95D5B
+:10E74000B38EB5525EE3C5433C0F79E87D1EFAFBFC
+:10E750005CA00F8248B7A35860A74997D7A5D143BB
+:10E76000DDB3609F18E2559C7F34BFB59788FBF4FA
+:10E77000C47B4274EDBACF0452D5C9FBAC80952955
+:10E78000BAF85A7685DB50EF559369689F190C4BA0
+:10E79000C85799B51EC3F34E39C5D7DB2BC836A071
+:10E7A000DE5FC7DA687DBDC57CAE9702441F170FD8
+:10E7B0009D48C5386448E003D6FB24ADB736705198
+:10E7C0004F1FDA7AAFB6AE0F97C17C80EFFF847E21
+:10E7D0003994773D704CEA4E707753DAEF1CD1AF25
+:10E7E000D7F78F90FFD8ABA695ECF7D9B57B25D49A
+:10E7F0005B2037A8DFBA65562A7FBDCC4D3254C3A3
+:10E800006F4F68877947DA7DF089F4D22EE735EBD0
+:10E81000A55DCE387AC9648DBC86FBDB95CDB20789
+:10E82000E960E5F753297FE2A9067E2E717F33CF99
+:10E83000E77BAA8EE76D6BDF3DF77C32EDEF9C1333
+:10E84000FB7CCC7729631AED7B5FCAC0F3451F3B85
+:10E85000026FE8E5E053CD9FDB505F0CD6F26463B6
+:10E86000F40B0A5E3CAF42671F25B47B86AD917105
+:10E870001DB70586634A1BF0F73B9C3EB91EFACDD7
+:10E88000B61293FE9E8E8B4D7F9DBDCFD3B96FA4E4
+:10E89000ED2B69EFB57D27490A7CAC97EBB1FB4ABC
+:10E8A000B1FB21B2CB4A79D65ED9EE958D7A95E847
+:10E8B0006E653FAE3757EEB513DC56F673D0FE2DBE
+:10E8C000CCF70CCEB705F4169EC3BB78D441EDB49B
+:10E8D000F9C37C871ED2CDB7DA1499BD4F8A3BDFCE
+:10E8E000CFF570EC3A5F633EB2363FD9A9D0BCDBBE
+:10E8F00099DD8B786B30F3FBDB826FDA291EDAEE61
+:10E90000BB64C37B83DBD9251BC6694F3B02920BDB
+:10E91000BE23F78AB8D00FD9DF7C7120D27FA27DC9
+:10E92000BE41CE1215DBC33AAD588E72072E6E6310
+:10E930009CCF0257E837C959E2708DFCBBD69FEED9
+:10E94000BA22BE8CEBAFC6BF83A2B3A324216F63F0
+:10E95000E94D6ADEFB15C6F581BF285F34D89B857B
+:10E9600056029CEA8608BA9BC1C4DF4132D2C3C7B3
+:10E970000E7F3F5CAFC6975780CF409CF75B0EFF82
+:10E98000606C8FF3C0F33C207786B8B89EDA894775
+:10E990009635FBA94F1E97639114467926B1FBB3B8
+:10E9A000939CD34660BFDC011E13DEE3FE77D0FBF1
+:10E9B000B82BC32F4C792ADA79E24ADC27C4737C5E
+:10E9C0008DEA19E3DF4B32C2E1B4C3FF6D1C375847
+:10E9D000D249572B3D5784C72484C35B8EC0142C67
+:10E9E0009D2AD00B0265F45CFAFB555936DF2ADC10
+:10E9F000BFDCBA9CC3A1FD590E87ED2D26A2E30D05
+:10EA00006C10F1DF20D385D9383EC8979938CE886D
+:10EA1000D67A13E6F3F50B794C748F536B83C97474
+:10EA200065BA9D25E8768EC0C3FD8887C1DB785C1A
+:10EA3000E50A743B4FD0EDB5C27D89EB8A7CDB855E
+:10EA4000AE6AF47475ADF9439238071B3B1E636DD3
+:10EA500014BFDFFB9285E477D50E7EEEB76AF749E7
+:10EA60003A2F5AF5B28588B2EC651B3FBFD2C8DF9A
+:10EA70009F2B8EBFBFFC6F2EEE5F5536DCE7D5EBCC
+:10EA80006BCD0EF8A9EF82BBAFDCB94F9736999FDB
+:10EA9000075969D3F241F97E9D4BD0595A2FBF0FC8
+:10EAA000F54EDA781E177239E6D37E5DD7731F9C58
+:10EAB0006FD3453FB7DB43F640EC399074BC179CED
+:10EAC000EFBB12BDC826BB17F72DD326C6B4734CB7
+:10EAD000A4FCB9F498FDBC904BD8C166964972D499
+:10EAE00016FFBC9792ACD97376935E9EA09CA7FB51
+:10EAF0007A9C565AF7D27496568EF101A742E73D9A
+:10EB000063C7D1CA149FC9709E286DA2DD705F468D
+:10EB1000BA3FD550EF3EB387A17D5620D7F03EBB1C
+:10EB20006290E17DAF9A0243BD4FED0D86F639400C
+:10EB300070FA7ADE9A9B0DEDFBD54F33D4AF5B773D
+:10EB4000A7A1FDC0D0DD86F783B72C32BC1FD2B0A1
+:10EB5000D450BFBEE921437B39817DADC159D6EC8C
+:10EB60006BE788009D1F735A25BD1D72D8C5EDF057
+:10EB7000629795E0BF5AE8E3D5E2BCD96AA18F5B02
+:10EB8000D20BAFB8BFF28FFA63675DC6B8578988FA
+:10EB90007B9DDB673621DD57ED07BAA0BFCB15386B
+:10EBA000EBE2F6D794B9B47A7E8EB235413EC79780
+:10EBB0002ECDCF03BF248E7F674AF6C4F5AF40AE9B
+:10EBC0005D72E9FD205623A31CD0E452751223BBCD
+:10EBD000ADDD15ED8F7C04724A4A4E47F9F458CDED
+:10EBE0003E944FCD16924FAF0F38417EF5CDB5F321
+:10EBF000092E875D3C5E2B9BBD1E7ECED4A8770F71
+:10EC0000A9AD94A77D68A4CCF07E948BDE51749E50
+:10EC100039113CDF44BF1964D77E940D23AFEE77E2
+:10EC20001E5A5641F9CC89C63B34CC4671CFF29876
+:10EC30007B7007093A2A4B16F0B470FFF1EC0B4ECB
+:10EC4000CA2F3E5BF00EFDFDA2B38D7F181EA4BF40
+:10EC5000D7D57A3FEEBF07FFEAA0B84CF9B0778668
+:10EC60002F27BBD6C7FD37F177C1C6BD78D8857EC3
+:10EC700077F9F6FDDD823AFCC5FA6D65627D4C6977
+:10EC8000EB4F79A1AF9CA2BF1B53FED2816E3C2EED
+:10EC900064CC5B89F5D7CB6BAB086F5ABD326A3554
+:10ECA000E4AF542AFCDC6F65D441F92BAE64A33F7A
+:10ECB0009F105ED708CFD8E71A3C0F0D3BC5CFAFEA
+:10ECC000DBE2D36F4DB2313E1C7BAE2051FEFAED3C
+:10ECD000A2DF45EF183A075F6E0EF7BD96F8820681
+:10ECE000A7D72F2FA0F30A2F2438AFE04FE671F7F4
+:10ECF0001706DC4B79C763AC35A5A8BFC788F86594
+:10ED00009CBCE37B9247623EF33F27EFB852C38F30
+:10ED1000C8EB1D837C9CCEBAE41D5FED3CC824BCCF
+:10ED20008F3B0E7FDDD401BFF767E0BD4EF73FA1FB
+:10ED3000521ED002984310E3261B548A9F1EBE6CBD
+:10ED40006118CF3EB95E7D1AF3552A9ED8DFF331A4
+:10ED50008C5F0FB3501EDD820DFC3E1036CC16C208
+:10ED60003C8D8A0D0F66607EE467C0B74B605E0B1A
+:10ED70009E48A73C9EC32D8F64209E4E097EAEF810
+:10ED8000FA87B721FCB79BDD838741B9649B64C8D0
+:10ED9000035FB4C966A86B79401AFE98D4991FEE38
+:10EDA0000139FA78B2F17CCBF0CE7D85C793853CF2
+:10EDB0009D0EF3AD1A79D18C78DCFFAA9DE6BDC714
+:10EDC000C1EF570B0FFBF28DEBA15EFAB5A2DDABE5
+:10EDD00063C82B62B80981F79C88FCBFD297948ED8
+:10EDE000FC7CE13738C6EBF2A0C3CB6A886F4A7F60
+:10EDF000C5FDE2521BCFD74D986FC4BAE4330F4024
+:10EE000079DE25CFA8F33C84C12ED1E8A63159E4A0
+:10EE10001B09BEDEFF2ACF2B9A7F48D89357919BC0
+:10EE20006FE2BC15C4D7EBB370DFF1B080C6E1CBA5
+:10EE30002757D13D44A3258CB0B19397E3F38D5967
+:10EE4000939F98BF3FA0133F93BD0B3BEAC89653D7
+:10EE500047DF67385770EDF2E6CAF2A436999FBFD4
+:10EE60008B95EFB174FF7F4ABE970F3BD01BCFC984
+:10EE700043F99F745E7E3B978FB17C1E2BCF6F8AC8
+:10EE800091839D72DC6490E337097DDE29CFCD2428
+:10EE9000CFC13CE3F7B7142AA19512F93D5FA0BE9C
+:10EEA000CE7778D28AA1CB2A776E52E0CA7EE82547
+:10EEB000E493765BE06B2CFBFC6610FD5DCFC1DB61
+:10EEC000EA4DC8BFED09EC8FFF0D39A0FC7700803B
+:10EED000000000001F8B080000000000000BCD7D2B
+:10EEE000097C94D5B5F8FDE69B2DC94C3299EC2BE5
+:10EEF00013761570801010A27E4900A3101C5001DB
+:10EF000035E82490842D24205AFA6A5F262460C4B0
+:10EF10006843B58A8A7650F051450D8235B651273F
+:10EF20008014AC4BACB6A5AD621044362582FAA76E
+:10EF30007D2AEF9C73EFCDCC3799B0F4F97EBF7F7B
+:10EF4000FAB397FBDDFDECE7DC6566451B181BC3D8
+:10EF5000D8B32636BBD506A902E930C6CEE2DFD546
+:10EF60008CC5380A66452731B6DF0A29D463CCEA56
+:10EF7000383494B15C6660712A63258A37C601E52E
+:10EF8000D5D6AE07CAA074C96FBE354311DB10EDEC
+:10EF90004D352632E64B37BB37E504FB93699203C8
+:10EFA0002A41BBFE2B0AD9C104C62C56E68B1AC5D2
+:10EFB0009862643ED3281CC7B5D200ED8D4D8CAD50
+:10EFC00081F6B17646F36443530D2C99B13BAC8C7A
+:10EFD000FE7C850C27C37C3BA2FD0D0A63DF332D2D
+:10EFE00003E7F303D3321D50FF23A665615E8EDB7A
+:10EFF00028D6693430EF565BEF79CD74287C1CE657
+:10F0000019EC81312B0A9937141E322D7018A95E24
+:10F01000C1C337677741F9671DB76433E86FD7AF6E
+:10F02000C6C67545A82FD3B575B5EE89D0F4FE3A9E
+:10F030002FA5F18C69389F5FD4CDA7BC13F25BA1DB
+:10F040007D85D933383EA49F818E788297A3E04F87
+:10F050009E01009743CDAA437141CA0CC5D8FEA0BA
+:10F060003FAE78BB6897A86BC7E7A9328DB101B0F6
+:10F070006E9BF15F5D02766719AE9751BF7DAD73F0
+:10F08000A683D38799B9ADD8DEBCE33A2BE25755B6
+:10F090003407E6253D5C0123203DDC839FAE606C98
+:10F0A000B4E2F538A89D9620CBCFE6E0F8C594975A
+:10F0B000E3B34C58715ADFF0628A7613E2EF08D35B
+:10F0C00066627FAD66769903D6DB1ACDE6479A6F06
+:10F0D000A9C05FBA43D00BB3390E5F26C683F99D32
+:10F0E0008CD16EC77ED2A23C65D86F5E46AD6A8277
+:10F0F00026B3A21DA2BEA67886537925D663A99A07
+:10F100005202F0CEFB04E810B2DBF6142A2E183FB0
+:10F11000B173A2E282F11305FE7ACD5FC0ED25C680
+:10F120008A23CD7356349FE75201FFFD560FF1D766
+:10F13000EA1C6F6A2DF4E76A659A1FDAB5E2944219
+:10F14000E0F396C34CF5374477F954A4FB5B987B06
+:10F1500013D0414ABE4F31429A31B5A50030CE1A84
+:10F160001C4EEADF59EC4D55A05E7AAAD9AD2A179C
+:10F17000CE6FC35A35D50BE3E77A0D348F759DBE3C
+:10F18000A8C130AFE44E6F8119D2A2F864EA3F857E
+:10F19000D5D6233EA03D43BE1CEDE0FFCCF516AA1C
+:10F1A000AE10B8E4CDAB6D30C3F7EFA3BD6B43F940
+:10F1B0003163B18FC639AA78FB39819E8EBE193D65
+:10F1C000DB8FFD059C4447B2DE5388D724A487C259
+:10F1D00074960AFD6F34D1BC7237FEEA36E4FFDC68
+:10F1E0008DD718951039F38AC344F58FBEB9B01F77
+:10F1F000AEDFF7370B1B14410EBD28E8E5618187B0
+:10F200006DE6C874F59C1C5FD0FB04A648F9F79C1A
+:10F21000907FB103607D4BAA4F91FC6B76B8A8FE3E
+:10F22000E3C6D6DDE900D7C7E731B70F3E2DDCBC1A
+:10F2300041C1F56E33B75EBB05E7B5C4C0107FBBF7
+:10F2400076FF6E773AE4E7CF738DB4B842DABFFD4C
+:10F25000EC6AFCFEF87C3612E19AE65FAB18003EE1
+:10F26000DF46B5D0BABFDD6461F530B5C7373E9231
+:10F270006CC77A5E8303EBF5E22340B32115D3809C
+:10F28000C9308EE311E595C49F843BAE1FE5E2AE25
+:10F290004DAFD0BCE57C8050CC08F7A27817C16B8D
+:10F2A000E1E6ADD722F1A72F762A6A4E705EE7938A
+:10F2B000FB1F0ABEB8503A7C339EF331C8790DC7A4
+:10F2C000F3E51949CE7F62F3FE1DE13ECCE64A2804
+:10F2D0008029353AFAC77861FC7E03D8ED9E08FC98
+:10F2E00078A9BD703FD63F19E53D807CDDEFB94B75
+:10F2F00027B258C62EDBD262407C9C54B85EE8CD63
+:10F30000A7423F0ABD28F5A42C3F29E8E20EA12719
+:10F3100023E8C79391F4A38BB9EE1B06F8626F1B29
+:10F32000887FC3C75D2AE87282E62D427E9E1DE378
+:10F330003D83F3BE629C7FA70AF5C716FB7622BF0A
+:10F34000E72AB53BED0017762D9703095DAC0396D0
+:10F35000C5E2F77569B1909F8B7200C61F7F44EBC1
+:10F36000C0F1E23C4CC1F6CF229DC33A5A9CECF668
+:10F37000E911E8FD36B12EC343DD66D46789ED0A95
+:10F38000F15B6FF8707904F232261EE697D70FE42E
+:10F39000694E6F791A017FCE786877C996C00EAC36
+:10F3A000352A7E600C343B17FE92E3097F5A0A8EA1
+:10F3B00023F175E959F576CFB0DEF8CA8EE7F3BFD1
+:10F3C000D3AE6561BBCF843EE80B8FC3E339FE8AC1
+:10F3D000E2B99DF3AC5DD48BD2D72B8BE778A988AB
+:10F3E000D7CB83107C0F8F8F806F29C7B7ED7949FA
+:10F3F00045BCE54D6C69403C005E47E37AC6E7D703
+:10F4000036E0F784A95C1E86E355CAC370FC86E328
+:10F4100095B17A9A1FE0E3AAF808FA4BF613AEC743
+:10F4200042E404AD6B9DA04F1FD227E3FA68832D01
+:10F43000B80EC93FB709784CF07A8BCC9C4E4B7014
+:10F44000DC2B66FB779A904EE7FB769A43E97401D2
+:10F45000A3FEE43C32BA7CB49EB47DDE024CC71FEE
+:10F4600009740C837A29B5B01E165C4F56E7870ADB
+:10F47000CAABACDA4E85A1FCDCB383E69DD9B98B6F
+:10F48000A7A88787F5D6B78CAD1474C8FB79339ECF
+:10F49000CBD5D55FCC4D45BA595DC0F5ED2ABB56ED
+:10F4A0008EF3BEC3A1CD45FCADB36BF3303F2B9AB9
+:10F4B000EB85E1F15A257ECFEA43DF2F117000B8CA
+:10F4C0005763BBC4E5CCA7C03AC6EEB3F9415500BB
+:10F4D000E9C3BC614189B53EC50C704DD4981BE5AC
+:10F4E00074BF046FBD09EA755FC1DC4F413EAED405
+:10F4F0005180F072CE7777203C577FA1927DBB7A06
+:10F5000029F3AFA47E18FF3F6F7F3FCA57E4DF5057
+:10F510007EF18979F8E2391F80BDF3F378CE9F75CB
+:10F52000C49FC2DE917CD997FD12C2D7AB2F92AF98
+:10F53000EFBF48BE5E2BF8FA97949E87AF1F0DF27F
+:10F54000F53A9CD7F9F87AB3E0E737057FF7C5D7E6
+:10F550007F10707B27BE4F3F67338ED75B8E73BAA9
+:10F56000937CF1D29E5131E5D0EF4E31CF10F9DDD1
+:10F570008AEB3B9FFCFE37F8FCF7D8EFF9EC54D947
+:10F58000AFC4F7F9F864B8D343F092F668ACDD4144
+:10F59000EB917C0FFCB247F0CB5EC12F6F613A2B31
+:10F5A0009ADB07E1FCD5A3EF3AB93C014F2606E907
+:10F5B000478E7FA437BCFE12095E594CC0AB98CB76
+:10F5C000914CE65363B1DFA90ECA3B4E38EAD155E0
+:10F5D0008C3DD4ED43B87D1BCFFDCC5C857922D921
+:10F5E00075C7049F247616927C01781EC27125BDD2
+:10F5F0002732C714F473A29C5C6E8C1EA7ED44B92D
+:10F60000E4D03C2ADA1BB94ECE0F124ED0FE8B4806
+:10F61000F8D88EF818D6DB6F08C7C3A762BE514E64
+:10F620000E8FF0FEA5FCC1FE8753FF2E03F62FDBE5
+:10F63000FF109443DF237EC62EAF55715D894C8B3E
+:10F6400041F923E524CB84F6B9BDDB9BC4B8D0DEF9
+:10F65000E484746C2DB41F166C9FC5020AC2C339B2
+:10F660001FE41443FBDD4DF66C9BD5637312BD3074
+:10F670002EAF0A0C240FA6D934E2A748FADF7991FD
+:10F68000FADF29F4BFF342F4BF33A8FFB19D723E05
+:10F69000FD2FEA8F709E5B4EB87BF022E304BDF530
+:10F6A000BF3382FEDF6FD5A8DF087C3412D713E3A7
+:10F6B000D046610A7C34DA9914D43BD06E0C7E6F4C
+:10F6C00013ED9BA71A86927DCDA2DD91FC9942A7EE
+:10F6D0004D37AF2B859FC2DAFFFBB7FF91C7580D9F
+:10F6E00016F179163A43FC9607A77E9AEC253F8ED1
+:10F6F000E9E22BBF5EE97E6F088EF7AECA90BF7E4F
+:10F70000FD9F5D6684776B74EC0816171CB7E65F87
+:10F71000405860CF9FFC97815289C725EDCA680683
+:10F720000C59B0F33B8A939CECF817C5492EB5975A
+:10F73000CFC075ED7A8DC74B4EBF7DD0897424C77D
+:10F740005F26FCC849EAB0D600D0D3A9CD6637FA07
+:10F75000212A733D920FF3A9D963627E9283CC8AEA
+:10F76000F54D7CBACCB47975A71A8B79A34FC439FF
+:10F7700094B3A4EF5C714897A63D2AF9152C919794
+:10F78000D7326BFDD9FE2057C719982B242E12AF04
+:10F79000453357489C22A1D8A9CB338CA7C0B88B3E
+:10F7A000189F6792275DD73E65767F5DFD34EFA594
+:10F7B000BAF28CF9A374F9ACDAF1BAFAFDC03F0AD7
+:10F7C000CDE7F8AED3D51FD03443971FD4728BAE9C
+:10F7D000FEE7ACF6E17C5CB74FEB1C08F39C27E638
+:10F7E00039645DB9AEDDA586D63CE068362FB070D1
+:10F7F0002A1B01FCE85FA8EBE7F8B3C57B14F8CE41
+:10F800005A4C8738BC6A19C28BD60FF0AC6C53D8EF
+:10F8100063D0BE6A1D2F97EDE6B7AF5D9D01E9028B
+:10F82000BFFE3B637E33CAFD459BF5DF1F74DA13D1
+:10F83000294E93CED2CFAA91E8C046E39D5AAFFAA3
+:10F840002D803FD537248C0EF4F860FF4BBA700939
+:10F85000BAB0A4EAE922CAA5A78BAABDDBF202AC22
+:10F86000379C63863A23C251C2D9EED6D38B842FFC
+:10F87000E8C9FF13F8BE81F08D09C2372DCABB035A
+:10F88000F9EF74DB7295E1785EEF686CD797FC9DB9
+:10F89000622FDC8DF2E274DBD7B7ED80F5D5C47052
+:10F8A000FE3FB9E3BBC128DF64BDEB5694BB278E96
+:10F8B00006E02ADEF7B07FF9BD73E8D3CDA3603D43
+:10F8C000A56D2AF1F149A3AD49B99C96E97200DC16
+:10F8D000941EBC713C4ABC29ED3BFFA900DE2C30D4
+:10F8E0004313C61BC7B9AD384F8CF421BD286087C0
+:10F8F0009E8D217DF231CECF57A8318AF7FC89B990
+:10F900001BA056833DEFB2F3C4050E38495F7A1B46
+:10F9100051BE8EEDF49EDE82DD1B3B1D18FF9DE285
+:10F92000F5D27A2EC70982FDC41C00277BB03DB4F6
+:10F930003B8EE34E2970C6A0BDB575D732F2DF58B5
+:10F940007B22D9834832A1764EB89F25ED46B0D3AD
+:10F950004FF17978BE7686DAE9C26E93F6765FFD6E
+:10F96000807E1D8AF6415FA9B2431D6A04B8742BDC
+:10F97000D1EEA722E80D4B82DE9FBD3218DFB22404
+:10F9800084E88925779EDE8DFA03E01D9D00F3B49F
+:10F99000DB417F2B17A4BF63B1FE2331B144D7DD18
+:10F9A0007B55FF106870CAEA8A7302BCF2519F5CF3
+:10F9B0004E712096E10CB6ABB5A60F33823EC93F1F
+:10F9C00035348E9D23AE9E8FF54607F3ED514C677F
+:10F9D00017AC1EC5E7E512EB3C10C5EDACB1225FDC
+:10F9E00013168FAA69E2F1D70D6660B5907EC62620
+:10F9F000D879BCC75A3016D7B341C4A157E7286499
+:10FA000027AC5614B21B76DA0AA9FC90B3200FE19A
+:10FA100077B918672C8C81FAB9A5BF988FB0C764E5
+:10FA2000FFDDA27EB7B390D2B1090E8117C7A588BA
+:10FA3000FF0AAB46FD9A5535229CF313B8FD5313CC
+:10FA4000CDA49F46FC3449F0D76421478BEC204776
+:10FA5000B91F387512945F25F94FCDFFD00CA43B28
+:10FA600029CEC4305E7C959057EC8CF15394270ED0
+:10FA7000F81FCA276DA863178CC40A98E9D35039B8
+:10FA800053C83AD3913E8AACFAEF93B64F3E8AF20E
+:10FA90006F123306BFE77078C738837C7063428F7C
+:10FAA0001EC84439D516DDF5CB29E81FBFA3BA9F80
+:10FAB00062BDD75B91C0EDB066B4A36D042A0DE3BF
+:10FAC00097D9621FA5777D0E9F0D7DC4792BAC055C
+:10FAD0007311BEAADD538129B0C3A5C8EF6D666F4F
+:10FAE00003FA1DDD2F339AC7503FDB81F9E13E1742
+:10FAF0002E17F0EF8B1981743DD2407EBC6B5DCB2D
+:10FB0000CE282877AD579C0AE44D46E6B38F0ACA43
+:10FB100093C6841C9A6C7357F90E3B9427AD9FAE25
+:10FB2000F487F9B4B096A258B4B7D6B38871C13A85
+:10FB30004147530A76507C3DA91BE834021DD42569
+:10FB400018A41DFF9FB88EB1DDDED14AFFA03C2274
+:10FB5000518B7ED32E833F529C769AADA811DB0D3C
+:10FB6000F7B38871BF9A683E8F26AB670DD2E9F074
+:10FB7000ED01F287AAA45C9F676046A0AB1B841CC2
+:10FB8000BF617DC73FC98EF8EEEC5955DAA18CFAFA
+:10FB9000672897AA6EB4FB317E5FD59EE3A379797F
+:10FBA00014F720486ADADFF760BE2A37D78171661A
+:10FBB000EDEF4C393C944C58C6E59F911D967A96D2
+:10FBC000EC06748A189B21E8B906FDD124D21FCD1A
+:10FBD0003100FFAAF5F53BD2A0BF3F3F0D7D40D1DC
+:10FBE0003ED5BBEF67D0EF4DA0C4568CC2D4C84AF7
+:10FBF000290E9D4AFDDC28FAF1FD0BC6B506C7BDEE
+:10FC0000A97D2FAD679F89F9AC40BFA6423EB4E9FC
+:10FC10003FE2FC0D2808999FE86CA6B56512EAD76B
+:10FC200093E6EE116EB47F5FFB6B960FE0FFF1CFB2
+:10FC30004FDBD12EFEC4D86DC7EF47EEFEC0AE013C
+:10FC4000FC3EBE5B2D4678DF26F48D847787C07B33
+:10FC500042A2A70DF1727BDDF779DE10BCB3154926
+:10FC6000C43F0BFC30C310BB63D1E618B4847AF2F6
+:10FC7000D5AD09BABCD41FD516561B290EF48DE09C
+:10FC800097055B3698335C38BEF72D1CFF8891D3FF
+:10FC9000CF91ED76BF2F27389FF22D23CD68977C2B
+:10FCA000D26E6101D483C64E13B37139A3003D787F
+:10FCB00005DEC3E7B9FBF518EAAFE2575C2E95C144
+:10FCC000582B00AEDEF605247FC2D751F1B16B721E
+:10FCD0000AC0BBE25E85E1BE0AD6BF1BF0E65D71DD
+:10FCE000CF5768E785AFB3CCA79747739BF47929C3
+:10FCF00027AB04BEE7317713DACF152DFA7A55ED2D
+:10FD0000F751FF556172EC7882B0AFF2D8D8B3608A
+:10FD1000A734D8FAC779CFA1AF4ED4815C1FCCD815
+:10FD2000B13A2BA547EA18A56D092E82F7E2F6F73E
+:10FD3000EF42BA59D2B6D58CFD34FA2739C64315ED
+:10FD40004BFBCD0CBF5B705F159ACEC17D559827DC
+:10FD5000DA3A88FFD18AE77BE44793236C9F55AC5E
+:10FD6000AF54C09FD9B85D518AEB1981DF8D5F8791
+:10FD7000AEE7D49ED1561CD79C28E4F15858977A08
+:10FD8000E1EB92EB91EB93E5D52AD05984F692BE44
+:10FD9000DB04BDCDDB387D753A80A2E1B5CFB3BBC6
+:10FDA000B85F4AF6BC51E0C7685B43F6BC9181BDC1
+:10FDB000CED729EC79F621F2ADA4B3703AAA423835
+:10FDC000500087B7B30A3BBF877EDAEF2778483CFD
+:10FDD000037FA48A7DB354DC37033A3A144647BA0A
+:10FDE0007C458B3EFFA5A92B1BF91BE8E550287C21
+:10FDF000BF0C3B6721D3A4C4FE0487792E6DB203E8
+:10FE0000CA2B986735DF5F6D21B81C31B6ECFE193F
+:10FE1000F2DD464EF79F08BCFF32D1332111F59534
+:10FE2000511B81F2BD70659A9A08F5CA9A1507F2BE
+:10FE3000D3DCC69193910F47318DFA9B9310D94E25
+:10FE40009B93C8E15F5E6B6266B0EFCB610C946B15
+:10FE5000E5DB55E273A0235B09E061BEC043F5BD5D
+:10FE60005BCD6990CEAFADE276829FF30BC095EC8F
+:10FE70008485CD1D66A457F04722F29BD403D5ADEF
+:10FE8000FAF21AD64C78A8413E93740CE3CF4E1484
+:10FE90007CE6666EA447EF5D76AB1277FEF5B2DEC8
+:10FEA00071058A3B9CDA3388ECCA532E570AD6F385
+:10FEB00002CE3BD15E367AC7E2778013E9A3EEFA31
+:10FEC000183FDACD07CE803F88369CC33B16EDA4A1
+:10FED000AEBF67B1354A903EE57A6AACCD449F35F6
+:10FEE0004CEF6F96816383FB9B659B12FC3E85FA0A
+:10FEF0001FD18676C52613D90D3EB62C95019D7966
+:10FF00005699481E96B7C593BF5BDEC8F701CAB7BE
+:10FF1000C4FB55EED77F38302F8887038D45E634F4
+:10FF2000C2538E9BE2C36D261D7D4BFC84FB8B0B65
+:10FF30009B3A76A7BA7AFB8B11F073A80FFC1C0AC8
+:10FF4000C54F73187ED8DD095CCE2C7D739015E605
+:10FF500077AA36CAAD46B037A41E6299408079C1EF
+:10FF6000F853713AC70733BA93119FA79BC710BEC6
+:10FF7000C2F154FCC35CC207FBBB9DA13D3307FC2F
+:10FF80009019F0FD7685F3C79C866B8B515F6F4AA5
+:10FF9000E472E63D904F9A99B1F7413E69209F3E49
+:10FFA00000B985F93FD7A552FEAF752E4AFF5637E7
+:10FFB00094D24362BF54F20D108019EDC2E704BF22
+:10FFC0003C9728E381CB53D17428FEE1833106347A
+:10FFD000DD7D33AF9B94C5D8F59A5EDFCDBE51AFC2
+:10FFE000CFBA4C8EC9A9E8B7DEAB90DD57EE99A029
+:10FFF000ABCF8C2EF3740C6C0F1D1DFC4EF69CCBFE
+:020000021000EC
+:100000003C03F8FDE6A909BAFA339B3274F99D89DD
+:100010002E5AF7F4E201BAEFB7945EA6CB979D0192
+:10002000208C466A76121E965B9930169D3C2EE80F
+:10003000E075BFAE1D9BF21398EFD76F9BA83C1CD9
+:100040001F12AFF3D6199817A636771DAC0DFA3DDF
+:10005000D402788276C7F7D9C9BF58BD65F4BBE32F
+:10006000207F608B89E202071A131E40FBE8C096CE
+:10007000A45806A977B52AEC08879985C8ABA2C60B
+:10008000FADB502E95F92D6EB21776F99E947917FA
+:10009000FAA33849E4970F553FC6B7007F3C2EF0CE
+:1000A000AC85ECDD2360B7E1D6F8118535628A8A2C
+:1000B000250ECABFE94CF2233F17FFA06AA9484F9B
+:1000C000CF46517D8A5040F9B1F7073DB586E8CB60
+:1000D000D51A20BEB5903F30B78BAF8F29A3321011
+:1000E000FF47E299160F93A85EF6D7FD46C0D3826C
+:1000F000C19D2302D0AE342790340BDA9DD868A27C
+:10010000F320D8AF03F2D5CF59367039A2A54C1FD2
+:100110001E0A4FFF085CF71C83E7FF2502FE8E5581
+:10012000FA47903CBB3B89F82A1CEE87CC5E82AF35
+:100130000FF94009CAC7209FF17D1E106A69286720
+:10014000E69ADCC9A89F0E359BC8EE04FD113B9DC5
+:10015000E22B2F111D1F32BA26E3BA0F35E530947A
+:100160005772DCF26695FC02A43FAABF56F5828D59
+:10017000C0A49EF235295E96D29B6EEE583A3605A3
+:10018000D7136EDFCAF44BE0556F88BDB0F035D59C
+:1001900043E78172BB8C370E0F5D4723E7B754DE10
+:1001A000FF7221D717F7FFC37E9B01E5FA80388CD9
+:1001B000931FFD50253A3BDABF252F1548FF846178
+:1001C00047DE4F207FBCC477D808F9272DDE814950
+:1001D000B0A44586E66CF48F4EB61F7C6002B43B3B
+:1001E000F6BCC98DC32E7C76413F8AE708FBBAB7BF
+:1001F000DC0AA473FB404B53009E8B5CADA4B75D3F
+:100200005B14C6D7EFE7E705841E773CA4A02DC595
+:100210000E8EB1AFC178C75C608F50BBFBA089DB8D
+:100220000579495C9E48FDBE5CE4E71A385DB3D7AA
+:1002300015FF2661EF84EA0129972725F5A7FA3DE6
+:100240007A99B592BCAAC4731DB0BEC59B2D7E7FA2
+:100250000EB571209F2FE0E861F5492E7EBEC7FCE8
+:10026000FCC3C84355AC93E67DCCE4AFECCCC1F6FF
+:100270001B1A9DD4DEE4A6B8ABD027566020944765
+:100280005582EFAA5B147F80F886EBC50AD13F4305
+:100290003D1322BF7AEB15BD3EA9107AB48285C505
+:1002A0006D5BF4FACD1363A7752D8471515F06E77A
+:1002B00005F631C0ACD2EBDF3D8DE6ADB8FD11E601
+:1002C00051C5BA03789EAE7A8BE20EB0DEF30A5FB8
+:1002D000C785CEB3D23D7D627C6EC8B861F396F01F
+:1002E000A6C06F081E24DC2B7D1C9E95ED0AE1EB59
+:1002F000336197C11FC59B25DEAB98671A9E37A84F
+:100300007A08E4654E900E7AF4FE56BF19EDDEE3EE
+:10031000AC25D60674BF78DDD6995760BBF5EF9350
+:100320007F51EA0C0C32C4837FE7EB58539CD5DB3A
+:100330004E08B70F7E2CF8E0EC8D79A21DC0A362A9
+:10034000A3AA458DD0D5A3F6D23E98EFF399319E5E
+:10035000395FC409CF37CF1AAC37EA42E61BD99EC2
+:10036000F9DFCEFB8524E13FF5B2870645F4A37A99
+:10037000ECA0F3E8DF8F4C812CD4BFDD5946D23F8F
+:100380005F1BDD7F2D48447D3C88FC82BEE46BA56D
+:10039000D0C315A897213DBC6E5B2CFAED9F3DB4F0
+:1003A0008DF6FFCCCF57C4A25D7C78DDDC077CC026
+:1003B0005287B7CC253D5CF598D4C35E73A87E2FD9
+:1003C0005A57F6EB9F237D6E8E725BA0B8729757DB
+:1003D000D8DD20EF500EAEE3F28E3DC4E56115EAA4
+:1003E000AB61A4AF8660BDBB2ABD4390CE43BE9334
+:1003F0001EBB6BAE772CB5678E00FA5D203903A863
+:10040000AFA43E957AD668F07E9484FCA3BEFDE747
+:100410009FC2FABF784925F7AE5ADD90EDC0FD8244
+:100420003EE4F6BF0F6F430FBC732E00DEE5086F8E
+:10043000B27F38BC3F6DE2703ED8CCE1BE7ACB8053
+:1004400058F46F3F6D1A4076CFA75B0611BCE7AD3D
+:10045000017893DDEBD2DB3D4D006FB4F311DE305C
+:100460006EF92E9780B79BC3BB49E89D669ECEEB85
+:1004700005571F9D1BBDEB698B1BF5F991A8401219
+:10048000FA2347B6AA0CF7E57BEC2261BF48387F18
+:10049000C35A9E443BAA973DB3D6C21CD0DF829775
+:1004A000ED7E06F9634A410A22E044CB1F6271BC2B
+:1004B000E0F83D768C23794C881D7381F859C23C55
+:1004C000747E7D49FB1FF6A11DAF68DCAF5F62B58E
+:1004D00005906FC1DF39112ACF1517CA348C93B834
+:1004E000AD56A4834CE6D2EF1B7919EE1B7D3BE899
+:1004F000ABDB96113F770F0EDDD7A9890E9830BE82
+:10050000D4BD55217C572F2F882D60B82F554BF324
+:10051000189ECCF5B1A2691437B400DD44C378EE5F
+:100520006417FFEE72F038E27A18D71E9C6FF8F766
+:1005300069487AA8CF6D06D2E7E1EBBF2D99FB2B76
+:10054000D5AA81FC8EC566EE7FC8F30F578AF22BC1
+:100550009379BCB72899EF179C8C62A4374EAE8D67
+:10056000F1D7D3FA26523CB3277E22E1E6307ED97A
+:1005700023AF90AF44FC603FB68179CEB388782E2C
+:10058000A8586C7FAB687F6BCB3BB42F079ECB1317
+:10059000A877E7ACB0B8D17EF5BD6621BABB279A83
+:1005A000EFA3B0C43823F2D12D42CEDEDA729F071A
+:1005B000CF3DCC6989D13085717C4CC44F73711F9C
+:1005C00036DD4CF1D3526BD7F3E866DF9E7AF04EFE
+:1005D0002B2CADDEC0ED967A27A3F3239783D98E1B
+:1005E000F15828DA7E36E15CF4A38F0F2FC638ED80
+:1005F00078C6096B1CC155975F6CE6E5CB93474DF8
+:10060000792893B13F31D770C4F762840DD2435932
+:100610001CC501AEC778B1135323D1D90C23F319EC
+:1006200078DA84A135193F9E26D67DD33816888383
+:10063000F506F6EAE3D7B30286C010C0C3F5C6409C
+:1006400007D2B5C1EA32A13FE0295646A19FBC7846
+:10065000E585CDF79EE42B69BE8B0D063ECF9F2A24
+:10066000FEA7004EB70293237DDE6664BBD4511C07
+:100670007F487F354E978FEA2DE5F42DE3E6124F44
+:1006800023A1FB50F8DE2AE607FD34C5627B73E444
+:10069000F8D183C9D20FE6F6E622C1AF8B24BD6D37
+:1006A000D1F3E936E4173C9F83762DC0ED5691F6E1
+:1006B00045EFAD82DE5B05BD3F29F2173A5EB58599
+:1006C0000568DDAF59088F72DCEB45FA4232B79B03
+:1006D000E53C243D3311873280E4403A3AD4D2409D
+:1006E00076D3FCB038300B8D57A991F23DF2C7702C
+:1006F000165373F73C9C8F7255941BE9FA5673EBB3
+:10070000A05A5BEF7A721FB794759AF8BD1B11CF90
+:1007100012FA6A926AA37341A54AB41BEDDF9305EE
+:10072000769F210EE32D26426D29D003CAE78FA2C2
+:10073000F8BEFD9CB8BBA6A15D581A6B36627A3B29
+:10074000EBB4E7E404ED92D5052AEEC1C1C0D55360
+:1007500034C837A03CE1F9FBB44C8A0E89FCB23FA7
+:1007600062F98DDF01FE297FC7140DE4C5C9374545
+:10077000395B4EED4FAE1274EC5B3105F7394EFE2E
+:100780004A96FF9C97DF2BCBEB79F9FDB27F915F07
+:100790001B565E1F56FE28CF773D5C3FC587701203
+:1007A000FB31A5E31592272E4167A52B0304DF52E9
+:1007B000C30E9E16B28021F7FCF56C291E5732ED50
+:1007C0000B1EB2A3DE4E48D35CC950CF96E43D8EDB
+:1007D000DF174E577C6694931FFA070BB91EF15C26
+:1007E000AD4BD06D542AEF4FC21BFAF91AFBBBD8A0
+:1007F0007ED6E1BC9274FD7CFFEFF4332FB5573FFA
+:10080000E6947FA39FBD61EB92765159BA9683FD22
+:10081000B14389BAF3658BFED31D877615C3F365A3
+:1008200000FA452B5BB34743FF8B5E7835BB32C480
+:10083000EF5E72C6C034B09F6ACE304A8F77FCCD6F
+:10084000EC82F92CD9DE619E0CF56A202D0A99D72D
+:1008500062794E9275196784E8F5C12906219FD601
+:10086000D27C17BD70D488F85C64683DFC18C67BE8
+:10087000C62B11F75D6345BBFD7DDCE71A96C2E52B
+:100880009E2753BB2C05CF45A0CC407DDC10799F23
+:10089000FE4ED15F6934976F73F3EC5617C079CC75
+:1008A000877C9FB9727DCE288CE35E9E543806FB10
+:1008B000EB3B2EDACDE3A2ED3C2E5AEAEC5C0EC205
+:1008C0009BD5A66CB8CF7A2563531E917C062C0B62
+:1008D0006D8B2D32DF3665623EC5B9287FC3235B41
+:1008E000EF43BED913CDCF4DCC193B3C1AE542574F
+:1008F0004E8CC101F2625C62592DE26FCED82B277B
+:10090000E3F7028B7D70198FAB135D8C4BF44CC1F8
+:1009100072AC8F710DAF99C7B9BC6FA914E7F28E95
+:1009200088F146DA47BE56C0A136859F73DD03685D
+:1009300046BB43CE438E0F86CAF24EE8EFD0CAB410
+:10094000916B5CB8DF515043F424C6FF65A2B73405
+:10095000747C58EE08FC7EA1F3B83985D36F0DE2A4
+:100960000DF198AF322DC45F9C31314697BF716A4B
+:1009700002D342E3AD3766E8F2B34B07E8EADF3271
+:10098000EF325D7989A533B7F622ECDF1ABB3D1A49
+:10099000EDB08FDBBFF9CBAD68D76D54DD0AAC6726
+:1009A000C16B9BFE32016A9DC2E397FCFE14C5BD7C
+:1009B0008EE17936E43DA3660CDDAFF98275D2B9DC
+:1009C000C090FD00DDBECB22C72E3AAFFA63EDD753
+:1009D0003C9022FCDF516C14EABF53B57FA638DB94
+:1009E000121B5FCF17AF1E30E339063C177016E8B5
+:1009F000FB1A6CA8229FFB280E5DD476C08CFE915A
+:100A00003B85CBE525994B8D6091B11A48516F4CD0
+:100A100006F91407F4D1D9C1866FC7731339763A32
+:100A2000075E7D66060869A423DFB0A5506F5153A9
+:100A300031E5979C89A67EDF533B27D379E4571491
+:100A4000DA2F28C998B312ED51AC7F078C57F2E228
+:100A500035C5089F25DBF9BDA712F54FB9D8CFE200
+:100A600096626A5FA2B23D0AD807538AB89E2D41AA
+:100A7000DD0E7935CFBE06F5AB6A0E0C7E1CE5891E
+:100A8000D94EF224EECC2D347ECD192BB5FFAD908E
+:100A900017A62E3EAF49673CF45DE2BD3D85EF03EE
+:100AA000CABC2969A311EF1598BA18D5BFEECCA519
+:100AB00094CA75BE35F4E9449463A6A4AF276700D1
+:100AC0007DBC95A838C8DC0893B7A76BC7C6B1082A
+:100AD000F2A8679C33FCFCAEE50C3FCFDB9EA6FD85
+:100AE00009F96ADADD5D46DCBF6136AB03E1356DDD
+:100AF000DC485765081FA93B6E36235E4C0FBD6F5F
+:100B0000467D6C81B428A4BC5A9E3B0F93C7FB045E
+:100B1000DFC97B0752BF30DF6CB2476F13FEB7E40B
+:100B20009337457DD9BE13691CF1F8B285FCA73F08
+:100B3000A7798FA3BCEC2C60B35F22F9D8998DFB09
+:100B4000263FD6FC01CF5685ECFB2E3ACF3E6D9C5E
+:100B5000CB80FB01DD3DEBE0FC7ABE757C2CEABF6F
+:100B6000A7B215D8EF7B575FDDA9417F1D3F1B3D25
+:100B70001AE5BE1C5749E5F77098A3FB3BF4E76AFA
+:100B80005E8F71215F97A073941BB463E13BC3F840
+:100B90005FCDEB96A71428AF89057F16C62F7A2361
+:100BA0002A8074DCF1469411F5437DA657491D83D4
+:100BB000DF874C44FF4D6BB71819D9379A01BFF73F
+:100BC00035DFF3C9A7703A937CE96DE2FC5226E861
+:100BD000B45CF09F57F0D1E9DA14E2C3D377C3A431
+:100BE000719FF36E65F876B4075C76F72057902F07
+:100BF0004BD0EF81EF2597C593FF17C277C4878B42
+:100C0000CF38A8BFEA332EC1E74ECA4B7E2B17FC64
+:100C1000621176C43C41DF49E9DE91A930FF9206BA
+:100C2000E07718C7BB322D17F928482F6607D21571
+:100C3000D04B6A6508DF3474DCCCD0FEB0247A88EF
+:100C40005EE6411A6A7F54F4D81F8EC9C930EF6935
+:100C50008D39BA7B1679A91747F70352C5BEBC2D4B
+:100C60003008ED55536D941BEF839D4AE4FB33CB65
+:100C7000EEE5F05B66F214A1FDB0EC51C50D9821D4
+:100C8000BB02E551DEBE5A7368BCF1E63323980B14
+:100C9000E070C39981945E9EE49D88F82F3B3353A6
+:100CA000C06BC4BFB50F3846E3F12593DFE2DE80A9
+:100CB000FB6C515E15F17B248B391E0C892F613C36
+:100CC0000CE362727F50C69B2CB89F1AA227BF31DB
+:100CD000B664A3BFD32BEE54A0DF475BDCF1A73C87
+:100CE00003941FCBD128FE34C7E0BD0DF1BA708646
+:100CF000FF0513E417DDBF2D16E3DD129EADC6C060
+:100D000020D493AD00478C83B536ABC57E6ECFC47F
+:100D1000F0FD2F4ED7928EC3E97BE199FE444FA799
+:100D20006B2DA4774E03BDB210BD23F58D94EF5209
+:100D3000EF487AAE3672B9556D8BA37315417D338A
+:100D4000DD83715C36949F7F0BEA9BA71E188FF49E
+:100D50007F3291CE3587D3FF2B75A974CE46EA91A9
+:100D6000707D23E5B994EF525FDD95E65D8B702AC7
+:100D70007CEEBFB7FD1D3E5D67E47AEB3AA39DE8CC
+:100D8000E7C2E5E60121370FE8E4E6923EE4FEC360
+:100D90001749FF8DA23ED8AF6417A25C0FEDEFCFCD
+:100DA0006985BF41FA7D2195EBD51F6BDE7DC9FBBF
+:100DB0001752A51F7161F2FE7151FF7CF2BE43C84C
+:100DC000FB70F9CEA03F94EF275FBB84F6A7F73303
+:100DD000D007A8F7DA635C9B84FC27FD101DE73F72
+:100DE00097FCF764CEEDE843FEEFF8DFC87F498F4C
+:100DF000925F247F487E08E71FC90F53EE03FF0F61
+:100E0000F1F41EBF5F546DF46DA1FD4357CC48E46F
+:100E1000CB1EBB6DBB427CD64B2F08BE09F2895E50
+:100E20004F48BE907C22F9A35AF04345183FEC543A
+:100E30005B1F1C0FED6E4EF39E0EE58BC52F85EBF1
+:100E4000853EE90A2386AC22B196215D55431A4AB4
+:100E500057963EF8E14C0F3D5D183F1CBE407A8A24
+:100E6000493353BDFF437A8A494B8A484FB6B41F72
+:100E7000D19E385DFBD75C17CCE7742EC8D99C2077
+:100E8000BD4DF923E3F6C2006EF7EF89E6EBDC63B4
+:100E9000CEA278CE94B3FC5CABA44B8967690754AF
+:100EA00088784271BAC78DF395FEC285E2D992D88F
+:100EB00069463FA402D250FDDF97BD3B26EDE2F02C
+:100EC0003C20EDC2ECC4C902CF3FA29D383D125E6A
+:100ED00099C3A98B4380FEBB81ECB780918EC8F487
+:100EE000E957ACE37096F95501A3D4B709A86F810F
+:100EF0005E66E078FF2EBD941431110F7C79AA96BE
+:100F00000F78FF85C8B357A7227E668E93E5BF6D25
+:100F1000D606A2DC61328E4E7191F75491F7BDF284
+:100F2000F644A83FE541168CB343F9A4FCB89E38BB
+:100F30008AC282F5973EBAFDED66C2333FF7C2BC66
+:100F40005D46BECF24F2B990B787E4C785E5D7F3F5
+:100F5000FAB1C62EC6CF29FA39BFAAB8F5C6E9C775
+:100F600013628F002627E3798269DB1507C6416E7D
+:100F7000C93F49FBB1C1F5BF41EB5FD2AE88FCCEA2
+:100F8000B771BDB76CE7F9471EFD43B36FA0E82FFB
+:100F900099E264F4676A55343CFFB0789CE2EF9FB5
+:100FA000D31BCE8FA4E9FD1BFC33EADB333C7F77F8
+:100FB00031ED11CFD4BE3FB50F582E62FC59F991D7
+:100FC000EF3DFC97AC27E209D43FC0F286D6C8EFCC
+:100FD00097BC28F8B113F74D085E1F3523FC3ACDB6
+:100FE000129EFF68C67837DD9F81FCAB8FFE63AA37
+:100FF0006F189FBE16B6FE73CDFFF108EB77E9DBE5
+:1010000007CE05BF0DBDDA0BFA99AFA7A738A367C6
+:10101000D769E8270EFC7FB48B9778A29AD1FE0F90
+:10102000D2C761A28F4E19CFEF45FF9F4F9D682316
+:10103000FB47D43FDA8C7ACC63E8A9CFF941D217C9
+:101040005E05C2B3738CB7FFE0D123CD081FC00F7C
+:101050009553DE780E7E680DCBE787F18FA07FE297
+:101060005F94F3009F4111E4CC29019F2FC4B9EA9A
+:10107000CE426E2776F6E7A9339DDB85FF12F83660
+:10108000A4F3FA9DD1217008C133FC05D00F095992
+:1010900037C1E9E644B9EEA892A9B0AE4E272FB702
+:1010A000A59BEEF7E507F3E1FDC5A64795205C8219
+:1010B000FD5BDE41B974B3809B33DDFA8E8FCB4389
+:1010C00005F9B29A0804E862BBE253D14F40BA88EE
+:1010D000B0EEBFF7A62B5F587BCD748EF65DBDDBFF
+:1010E0006B61ED9929F762DA0BBC4D0DC36B71187A
+:1010F0005E2786E54B65DEAF937F522E96B7AD5DDA
+:10110000959C88714985EE8A06E939A504E97991AB
+:1011100043D26F2AC13548CF69EF20FDCE6895F2E2
+:1011200030FD7E0DF0361DE5E1F860FE0694179463
+:10113000CF28D1E242F5452695CF6A92F5B3EE2746
+:1011400079DA28FBCBA6BCC423F3F52B21BCE60A35
+:101150007DE173BD83E50BDB79FB498FE5BC734E05
+:101160007E680983CBFAB0BC2FACFE43E7D12F8D4C
+:1011700061EDEF0E2B6F0ECBAF0BCB37E9DB97CDCD
+:1011800053880FCB801E1011E7E3CB9BD27BECD4AE
+:101190001E7DAAD8C86ED3F1D594069EBFFDB111AD
+:1011A000254DB6907CBABB24942FE4BD604B22231E
+:1011B000BE30F5212F4BD2F5FE59CF7A8686EB5BF8
+:1011C0005EFE09FE338DF6777476C14E559FEF5063
+:1011D000E5BCAF7A67B92D641F945D5982F195BE65
+:1011E000F75B26944CCC0CB14B7CE34BB49075CAA6
+:1011F000FA93BF3FABE27877A68F2FD988FB39856A
+:10120000621FD2C953D06B2AEACD1A118F998CE78D
+:1012100063B15E7460D0B2503B84B50EC67576FC87
+:101220008CDF1BF035007E30BEC6DC668CA774C434
+:10123000C5AD7806EAEFFC99BA02F5E8FE15097427
+:101240002EE94FE9DCFFDC19D72FB902F21D31B7C7
+:101250009BF1BD928E7B2651BA43D5567703AF3DA5
+:10126000F8D8B525B64BB03C8EE0F38BF44925F5A4
+:1012700040D7BFC44B3BD0DEEB7424E3BD06B6C6FB
+:1012800044FB7A8CB99F24BAB9DF3212FDE7B2FA77
+:10129000CB68DFAAFC57D327D3BD855526DACF808C
+:1012A0003F3A7FE25D3389CE3DCD6B14A9EF1A4AF8
+:1012B000DFF8E1E906BC1FD9FD8442F725AEFCBA90
+:1012C000F58F23F0DC63D30037A2E675B0EBF13C79
+:1012D000D2A7EB86D03D898351B574EE13EA33ACC7
+:1012E0005FF59DEBDD69B9585F75E0D18AC3F01DEC
+:1012F000EDE1C3F7AA4FE1FDC3B2587B349E973EA0
+:10130000FCBDEB5DB46BA1DCB112BE1F5EB5201954
+:10131000EDACC38A2B16DF1279F1B15925A9697892
+:101320002FDF22F039CB5E067C5E66E8A117D21F64
+:1013300095F13CFF62FAAC924D30FFC38F0EA17362
+:101340005F8333B4D674C0D3E90C6D2BA607C57D7B
+:10135000E5377EE0FB85BF3F519E8CF4F47B41C7AF
+:10136000AF9F294F2E0FB1772ABF3012DEDF30BB7F
+:1013700096E33CDF88CE52E87C366B4DC078F73C74
+:10138000E17F00FDAED816C1EE79385D253C75DCF5
+:1013900097948F780DD27125C94BF21B20FFF6630D
+:1013A000E5A4D70E5956B08368378AF38B6C67145F
+:1013B000BFEFB825CA1F9583F14F6D32B663A9AD53
+:1013C0008367D843F84ED4FFD8C7CFE77E0CF5D15A
+:1013D0007FFBD8F70F7BE83E84AC5F156BF7A1313C
+:1013E000F1B9DD6E443CEC37D61DC6737D954F9840
+:1013F00048EE573E91747737CA1BA0178C8F85AF84
+:101400002B35C344F0EA930F7D77944CD4F90777DA
+:101410009C930F0F3FB6AC64A3AD6F3EAC127ECA77
+:10142000E4274C744EBD6A8CDD88FB8F854FBCB9B8
+:1014300089EEAD2E8D1A85F713AA9EB010BEBAECB8
+:10144000769F03F74763EDC67848BF167648125E6D
+:10145000AEC4B88CCA8CD65194D2BD04B9AF7774DF
+:10146000C5830FE331CA63CC3F732CC0EF14220C49
+:10147000E0724ADECB0ADBE7ABDEBBCD5CC0CEB1AF
+:10148000CF779EFD3D205F7A47E242F7F96232C492
+:10149000BD9F9E7D3E13BD0B5125F6F98AD6F3F311
+:1014A0005B552BF8FB1D45093CDE7BA8CE878FC41E
+:1014B000E27A7D0EBC9FFB10D72F554CF15BE19F6C
+:1014C000D7AC5F6AA4FB8FE91C3E65E21DA7835180
+:1014D000EE6CF4D32B9F8822B8563DB9E02F8F4293
+:1014E000BBAEFA92C450BF3847D003F4CFF09EAEE3
+:1014F000ECE7F3FA9F6723DD17FD1AFC5BBCEF17DF
+:10150000CF5EB83907F194968DFB91B25ED5CA9F34
+:101510000DE6F5C03F063FB8EC5E95BFBFF6B2855D
+:10152000F41DF0782A0BB9CF3CAF71AFD93C2C78C1
+:10153000FFEB53C8E395FB907B60668497BC978470
+:101540007FA979C2DE7691FCA077784B0D0ADD5F2A
+:1015500002C945F77EAECFE0F6EBC40C7EDEA92CC7
+:10156000DB4DF75FAA1FB0B857E6F07E7AEE55E381
+:101570003927436725ED3FFED64271919AC6282D43
+:101580002A969F8B7869189D8B369A71DFC4C5E5C2
+:10159000C4F582FE6A5CD3AF417A81F27D463C8716
+:1015A00065E7F2B03A1EE0CEF5B06680714EE2BF5C
+:1015B00006F07ED346848CAF88EFD08F2B36D8EFE1
+:1015C0001E036BC2B80BD6BF6404C23161E66C9CCB
+:1015D000DFF32AF1312CFE817168DF3DAF8E46BF0B
+:1015E000B6ECDE9D93D7617EEB48BCB1C0CA5EF815
+:1015F00080F4C52281FF2E711EAC1CF278DF7F7E45
+:101600000697935E95C77BE60B78493A90E5D5F748
+:10161000F2F350D5AB2C64BF54D7FF95FAADB67733
+:1016200026A3DCAD7ED944F79817897997D767E56B
+:10163000EF03BA2A37C5D17BCB8B7D2566CC2F6EC5
+:1016400051281F6C97948D747ABCF19558A49F8390
+:10165000518141A887BA9746B9F11C9E8CB71D6F7E
+:101660001CF414C665E6393AED781F69DEF2014EC6
+:1016700094DBFB1D013396EF6FCD31605E7338F262
+:1016800031AF192FA7FC7171EE84FE905E148EE7C6
+:10169000C55B769AFBC3782D822EBE78FE83C1A8E7
+:1016A000A7AAB33B07A33E013A189C81707E56213E
+:1016B0003DBC640B3FA72EE96009D201F0DD424139
+:1016C000074BB6BFF213E4872588FF51BDE908E850
+:1016D00074177D7F69C364C6DBEF423A91FA0BF25F
+:1016E0008D2627C6DF441EC6C1FC5A014F289FC85D
+:1016F000CB7DC3F839B72E3AB75723EE2BF6C8A7E0
+:101700003EF0FC82C06379BD85E4ED0B02CF5DF74E
+:10171000BE1C8B78FCE2F99DBB719FA4FA25C5C164
+:10172000F7ABC2F842C0A506E1104BEB20BBA20606
+:10173000D71D1B84430FFD0B7EAC617C9D72DD3594
+:10174000460107592EDABF88EB4C42F80AB86D1FE4
+:10175000C2F94FF01BF233BDCF23D6E775EADFDDC8
+:10176000FE3083EB83D744BA18E802EF6731BC9EA2
+:1017700028E504147DB17503C57D24BEE4BC0F07C4
+:10178000F58816EF0CE2B1CBC0EF2F86EBCB7704D8
+:10179000FC0EAC4AC96E03B81DDF4CCF5412BD1A03
+:1017A00043C6937423C72B7A6EFA75B85EE83F8000
+:1017B000FDCB71F7FB628CD8CF7EC6F903E913E548
+:1017C000A7E4CBA28639D78DC473BFBE2FEC0386A6
+:1017D000E17A39DD1ECEE0E77F34B413A0BDD6A692
+:1017E00050DCF980F0E70FAC7A25B63C044E874414
+:1017F0003B4967F887F12839DF3D4E1EC70D9FB77B
+:10180000944372DE45F7CCBA0EBFCBF94B7A95F410
+:1018100029E128E954DE7F0BA757A235A93F559D42
+:10182000BC27FD784DE65766AFADF7F7F0BCB48343
+:101830000E8AF3DBDD498CC7EB1B537785DEF7811E
+:101840003F5BA8DE09D127CDC6107D22F57F4DA2D2
+:101850007614F1559CC9CF951C63ADE602E877F18B
+:1018600091CEC9F84EA2B43BAFFC3AA0C6611C6A47
+:101870003B3F7F26E1BDF8C42EA2FB6A712FA9EC85
+:10188000DE0F4AC6227DFFC644FB3165AB26D1FD83
+:10189000E3059BE6E621FDE07D0694E747378E19D8
+:1018A000CD9FF37224CFC47B0D1B1F9C790B7C9FB3
+:1018B000D7A6BA49AE433FC8AF65778E66482F07B3
+:1018C000A3BA4AC6A3BDFE53D581F6FA844D63EE92
+:1018D000C6FA13ECFDE2713DDAC604CA6BC638D213
+:1018E0000BD2CE95E7F21A4C9C1E466572FEB9A447
+:1018F0002755C479BC86C1B87FDEBD218ADE412A66
+:10190000358B7B9CAFA5903F5163C62B85742F947C
+:10191000ECB0F966664DE3E79DAD69F07DAFA9F3E4
+:101920004ED41F7BEFB48FA473F5EA7779E5DC7EA4
+:10193000E6FB8509FA7787E43C468AF1C3FB93ED21
+:10194000F788F3C607C5FC8F36FE6626EABFA39B61
+:10195000073971DD9FBF1645E7F03F0F7BB7F06297
+:10196000EF6901DD86DD835AC9E545A6FE9C96A494
+:10197000F3F3DE53FA28316C3FE0DCE78B4ED431D1
+:10198000BA4F6D015F98EC9998EFB7E1B9BECA16EE
+:101990008B03EFB31C42BAA7F33C2ABF776BE57CFD
+:1019A0007068EB483FFA8D951FF1FB45BBD6DE43CF
+:1019B000E70A2AC0AEC4A3543D76F2436B67221BEC
+:1019C0009C727B57E33B2FA736F37310BDDE2DD8F7
+:1019D000BB6D77E8BB05176B1F5FA85D2CE30A356D
+:1019E00099FA7BF112AED23F7A03F03F6E54104E5B
+:1019F0005FD6CD27BBF8449D97D293CA8107262096
+:101A0000DDDAE3E8BCFEEFDB1E54F19D95EAED2341
+:101A1000BF43FF76BC2DCE81FCFA65DD0ADAEF3CD0
+:101A200051574B69F05D573FA5576EEFA0765FB6F3
+:101A30008D6EC77BAEAFDBE284BC0FDFD7E178EC05
+:101A4000EBFEAE5CD7B19F727CCA791FDB3C3716C8
+:101A5000D7D5F17842FB1588C7983807DA7755E271
+:101A60009CC7E175DC7E3E628D7B662A9E0F597FA6
+:101A70004332BE8353D171E34CFC5EF99AE240BB22
+:101A8000DFFDDAF4588CA37D66EC8AC57B4D9FADF3
+:101A900093F7A1FCF41EE9F86246FB4EE30346E629
+:101AA000CAE15BCC4827579C30D2BDD3E3B81F8531
+:101AB000718FEFA229EEC1C43E53C5AB3C5ED2E3A9
+:101AC000C70A3F6E8258F75B994EB97F40DF8BC6DD
+:101AD000F1EF9FAFDF360DFB3BBAD1E4C0797FB9A0
+:101AE00091BFCFB010FC2FBC9A726433F76F16B65B
+:101AF0002AE40F1FDD0CFA19D655BDD4A4F1FB9AC8
+:101B00007AFA2B82723CD728E96FA1E627BA0E7FBA
+:101B10003F239EB5D2BDAE1F8B1E03997A3FAD8782
+:101B20000EFBC2BF8013F22DD2A1C4F3C2757CDFBD
+:101B3000DCD93AB200E949E25DCA05795FA1C1CCBE
+:101B4000F87BA58668FA3D80E936974981F5DF90F4
+:101B5000D83511C5E7B02C6E7FA845060DEFA1B1B1
+:101B6000064BC4F7A8FE26E4E89C2C46E93799DC2E
+:101B70005E90F7B1640A0BC9423D3D3DC6F98D0B3D
+:101B8000AA1C5EBF749A11E63F7D82F3CE016EC03F
+:101B9000DBFA9F4C3302DD4E1FED7CB93FE4BB33D3
+:101BA000EFE2F9CB9D634C90AFAF5F316D22D4B7BC
+:101BB0006769873243C691FDC2F7CFF1BB3FC17B56
+:101BC0000CD31A33BF1F7552E91EB1222758FF7D6F
+:101BD00085EDFFBD12CC779918BD03F34DA69C7F10
+:101BE000E4744C96763A734CEFEFE58CADA2F3714A
+:101BF0003E7EBF05FE3CD664BC7FC4E9A95CDE77AF
+:101C000069D2DF77616E7EFF4ADE4392F78C2E0940
+:101C1000DE9F5A7F31F7A74E9A60BD71BDEFB329A1
+:101C2000ED7FA0F7B01A7CAC2B8AF0A0BFBF521D8D
+:101C3000C3DFF75BF6F217BB90AC16487B05956DDA
+:101C40005EF0FE3E4BE5FBFE770A3AFCBC8E0D1CB7
+:101C500008AC7C7D6767AC0B267B625A6030F2B7BC
+:101C6000CBE2CDC8423F7E7D43E6B244BCF769710A
+:101C70004F85FA47FCFC5EE562616FB28D4982CF09
+:101C8000D5C0D5506F4FCE25F47EC3A02CEE479C17
+:101C9000C80964E37B3ABE1CEEDF403D3ABF56BC48
+:101CA000F29A24AC7762EB3D032B006F167CBFCD1C
+:101CB0004929C3FB4FD742DFE39CF4AE1B53699F16
+:101CC000D64FFD61BD58D4EBAEB9A93C8ECEEFCD59
+:101CD000493C49F8F7C20B4C01ED5183959970FED0
+:101CE00097B0F50EE453891FF9FEE9B29779FC64C9
+:101CF00099D2D59880F9E7153AFFF6B995DFEBE967
+:101D0000ADE7369911D4F3D7CFD5BDCF23DF19FD79
+:101D1000B1E34053B3847C19C94686BEE35A25DA41
+:101D20004E524B5DF8DEDBB2242BBDDBB1EC8901FA
+:101D3000A44FD8DB77B0D07A6C7D02D1C7EA1C956E
+:101D4000E0BCA08DD1BB3B256DE9745E716A9B93AD
+:101D5000D2D833A9F4FDE8337FCCE5F287E3A1E4E0
+:101D6000BF520AE97CD07F0DA194F5F5AEB0CD4A03
+:101D7000F76897EDE57A69D94D2AC52799B81FEE1E
+:101D800011D3F1D89A289EE36191DF8FF5C8F763EC
+:101D900035D339DF8F95F0B508FC84BF277BD3DEC0
+:101DA000D1A9F41EAB784F76B6A8D729EE6D85BFC2
+:101DB0002B7B4FEC647A5776B65615F15D59A32FFD
+:101DC000CA8DF6AD29D3C6DF6BF086BF33DB65C4A1
+:101DD00075CFCCE7EFCCDE343BE45D04F8CF94FF65
+:101DE00015C969537EAFF7814C48DF168FBE7EB3AD
+:101DF000C4FF25EC9273BEE39B69A677DE8CF89E48
+:101E000033E4678A777CD18E43FBFC94C6DF95B3BD
+:101E10008877A63B596E2AF2FDC5BED3FCFFDBBB1B
+:101E2000CCE1EF2F87BFB77CD9E665BAFCF0D6FFCF
+:101E3000D0D5BFBC6DA5AE7C64608DAE7CF49E5FDA
+:101E4000EAF2633A1FD3D51FBBEF295DF9155DCFC9
+:101E5000EACA271C794997BFB2FB77BAFA579FD9CC
+:101E6000A1CB17B03FEAEA17593FD0E52739FEA1C9
+:101E7000AB7F4DEA415DF9B5AEE3BAF229434FEBD2
+:101E8000D763F4FE0DE57C89FBBF75EDA631D72F36
+:101E9000F0FDE75989067AAFE31F59C27F1174F745
+:101EA00057A9B707B26C945F93D4FC00D15D9BC275
+:101EB000DF1F0ED363C6E31E0DE371EC157EFF2B0F
+:101EC0000EEC3E63C878F19A151CC2603EA1D8A101
+:101ED000CB27795275F55366BB74E569DEA1BAF27A
+:101EE0008CF96E5D3EAB769CAE7EBF159A2E9FE35D
+:101EF0002BD6D51FD0E4D1E507B5CCD6D51FB2CEB1
+:101F0000AB2BBFC43F5F577ED9E65A5D7E78EB0AA4
+:101F10005DFDCBDB7CBAF29181265DF9E83D2DBAFF
+:101F2000FC98CE75BAFA63F7F975E557746DD695D6
+:101F30004F38D2AACB5FD9DDA6AB7FF599802E5F53
+:101F4000C0F6EAEA1759DFD7E52739FEA6AB7F4D81
+:101F5000EA015DF9B5AEA3BA7269B74C19FA95FEFC
+:101F6000BBB0634ADCFFD4B5F7158A77A55F52DCB6
+:101F70000D2E584F767FAEEF418046E1BB883E0F75
+:101F8000C57D9C78B00FE514DEBB76F27331A514E5
+:101F90003F4A243B8754910BCFE9801D108BDE55BF
+:101FA0004E0EDAC931417B2CF36CC839B9F3D963D1
+:101FB000D764339AC75DD9DEFCEC24F43FB64EA655
+:101FC00077C1996F35CE43BE73F76ED87BC832BDEB
+:101FD000D67A841943ECBFBD512D99A3CEE1BF5FE2
+:101FE0006B3DC1F09DE59E7E45BC4281F52D0BE920
+:101FF000FF01F0178C03196BA903BEC17DE13A07FD
+:10200000E51FAA4BA5FCC3752E4AD7D50DA5F4B183
+:102010003A3795AFAF1B47F927EB34CAFBEB8A2958
+:102020007DAACE43DF37D6CDA6FC33E01763BA19BD
+:10203000FC644C9F057F17CBB780FF8BF917EA7CB8
+:1020400094B6D635D1F797EA5A28BFBD6E1DE57F05
+:102050005BE7A7B4AD6E33A5BFAB6BA5F2F6BA369E
+:10206000CABF5E17A07CA06E0FE577D475527E576D
+:10207000DD3ECAEFAEEBA2744FDD114ADFAAEBA63C
+:10208000F2B7EBCE50FE9888B72ECF5674F7956412
+:102090005EBEC720EDBF6968BF23718C337DA9B3D5
+:1020A000DFC3ECE8707CC87182EF270C7EAA21C4E4
+:1020B0007FF26573FF4ABEC710FE8E0213F6A97C3D
+:1020C000F754BED75029E65525F8610CD2E750A247
+:1020D000CFB72FC65F90FEA02DC9DB42F49965F003
+:1020E000913F6CE3F7892F4FF23E983D06F70B2B9B
+:1020F00076D3780E37ED1B96580249B372E99D707E
+:102100008ACBF5355E8D38F7DD67F9EB4733D19E25
+:102110002EFE41A577B6DE35D967A3FFFF8CC0C37D
+:1021200033D9065DBA2DC9BB09E7F3ADBDF6360359
+:10213000CCFFDBAB963E73474ED04FBE1E5D4DF0DD
+:102140006FA6339789CE1532EDCD1CB49BC0B0C2BB
+:10215000FC2CE6A3745CA2F705ECE76630B831EF1F
+:102160001D6FC98EB4AEF079BD2AF0F56AB64197FD
+:102170001E48F2B621FCBEB56B34AF77AFB86630FF
+:10218000AE4BCEABBF7877641AEB7E12E7F7ED6B00
+:102190005F1D560604E12FFD71BAD78F726CA9221C
+:1021A000DEB5EBF58E009597DEA9907D3607FC191C
+:1021B000DC1F92EF069CAA35D13BF2F8CE00EE9FD1
+:1021C0009DAAFDCC86E40CF518EE6F34E0011D28C5
+:1021D0006FF829BF4F5F8AEF628CC2770BACBCDF10
+:1021E000BB15A2BBA4E41C7EFF19EC3DF29F12BB01
+:1021F000E99E1ED0C99F116E0BAF50E9DEF9BB06F8
+:10220000FF6085F6932BCC0ACCAF2A11E8A37FDFC1
+:1022100074B044DC1790DF81BE3E41B87DF9EAD846
+:10222000A1147F7FFD0A17C2ABC1C0EF0FF9DE52C8
+:10223000F9EF2E0911AD4E184E71466674BB315E32
+:102240005422EE9B74A86C45A4F7C4957E9C8EDE48
+:102250004DE5EFE73584EDB3FC53D0D53F05BD9593
+:10226000ECD84BEF082DD9C3DF3B64B95DC342DF27
+:102270009DE959CF8AB72E1918B28E9AB603FC7C05
+:1022800005EB1A167A9E3C5D8C2FE94835DBBD1BA9
+:102290006CA1F3EBA16BD60FE9271EE87A00D1F50C
+:1022A00061DC579C6671C5CD82B40B4084EFFB782E
+:1022B0007FEDA0F341F29CD03CE6A1B40AC800E94E
+:1022C000D8E35B4BEFB92EC45F62C5F778C6CDCDBE
+:1022D000C67C0DEB9E980A70BBA9A9FE4D7C0EEF43
+:1022E0008696B59330BE3AC35FF626A6D3372A87C3
+:1022F000D14F05BE88EF87F110A576151EC9BC65C4
+:102300004BC12ADC7A99A6727CB03F727C00DD68F2
+:10231000AAB3F73A810FD2F83A345A871A5BACE382
+:1023200083D2954C531283E7DD7BF862DCA24F70B9
+:102330004B8D19BB69DFBCE6758B13F1BC9071BD89
+:102340001D8C67487DCD88CE17B16837D63B26E80F
+:10235000FA581623BA3EA630BAA72EED4896ED4D90
+:102360001D3520A8778F19FC79B103482FBB71BDAB
+:10237000BB536F70611C6C51A295DE3F3D16EFCFD1
+:102380000E7BE783DE239271AC074C3CAE143E2FEC
+:1023900065DC6EFE7B1866E6C3FD09FCFDE33CE4EC
+:1023A000677C3747A177A0BB90EF4D851E57A4FEF1
+:1023B0001B45BF7BBEE7FEAE0FD683F71B7B8DE3CD
+:1023C00010E344F371A4FEE8F9BDE564A61B6F7A3F
+:1023D0003FCECFEFDA359A7FBD219EE44D9AD5EB03
+:1023E000417CC9B88EF403F7E47C3E90FCF5EF1A0B
+:1023F00032D13EA77708D0FEBE8ACBA5774D2E7A84
+:1024000077F7DD821C8ADF4B797BFD381EFFBA5ED1
+:10241000C6BBF2C3E25D61F116961F39FEC598DBBB
+:1024200084E35EC23E92F0A138CB8E7C23E15DFE58
+:10243000BED20EE17F9E2A4ECC453AFF5D3F5577D6
+:10244000AE40A66B447CB439ECBDEB35B9CB1C78FF
+:102450001EC0F23CDFEFBDBF307A7EE839F42707BB
+:10246000F1F329EEC1059B114EC36CFE4252CB9A8B
+:10247000D185F356C43A2E73009C0D686F7A449C44
+:10248000D36DE5F1A589A497257E2F542F3F6BF4DA
+:10249000AF8CC67526F2DF19B0AFB392DC545BB5D2
+:1024A000001E89FE72D08C5548B7CCE8198AE374B7
+:1024B000E445331BD4FFB6C34CF1A7D70DE5BFC627
+:1024C000F3EADD7FB3303CDFD06ACF30A271DBFAB4
+:1024D0003DFF5DAB56FB84C9FCDD491683EF638E7F
+:1024E00074B0A75F44E4887B61AD0ADBC31F69D584
+:1024F00062F07DB756033B7D35CCEB25DBA8072F7B
+:102500002712F3A8B8CE67077AD7E13CF2582DE539
+:10251000EF377BE66F8071EF775A892E0A077A1EB4
+:10252000E7F364ABA6C2FCAE2A52E8F7D65689DFC1
+:1025300077B0BBA375EFEC7ACE0C263DF14C3FAEE5
+:10254000571B53B54EBCD0D127DC1CC66EDDFB58E3
+:102550002C93E272128EA1F872E4E9F0E53585E27F
+:10256000ABE7776B24BEF8EFD65C28BEEAFA319A67
+:10257000AFA4475FA16BEDC45CAEBF1AA89623174A
+:10258000FBDF119D312CF47701243D4AFA8C4097F2
+:102590004B77A2DCCD323830FE79CFD468D263924B
+:1025A0004E257D7E9CD343A743FA631CDEE69984C7
+:1025B000B2229C4E31BE154A8FA57DD22D7384F276
+:1025C000E534B013E29C68D71CD9D81A428FA5B560
+:1025D0005F19B99C387B75745E301E372D5F619F23
+:1025E00086E215FEFB74A8581FD93546F2A724FCD5
+:1025F0002E14CEA61BEB87A29DB61AEF0D02BC9A35
+:1026000014B79602FD196B0FDC81DF57897BBBBEC7
+:1026100061666E3F09FE90FD7D39A8F038D2A37D3A
+:10262000EC89984AA8F76DB2C185C059E52A7F9117
+:10263000F86D5F0CBD37119BD039FF69E29F210C0B
+:10264000F7F3BE5DE0ED87FBEAF7029E3EA5FB399E
+:10265000FE14FEEE61570A7F5FD625DEA1F7A6F2D3
+:10266000EF4C94FB297F474E7FE15768A27E17D538
+:10267000BFD7DC628DC67172AC8EA742E8FC6A11CE
+:102680001FFF1FC180237D00800000001F8B0800FA
+:1026900000000000000BED7D0D7854D5B5E83E3309
+:1026A000677E330927C9240CF98133C92484640265
+:1026B000930410446512020D083AFCD520890C8A57
+:1026C000DEA82493426CA3D77733908001EC2DA22F
+:1026D000B568793AD042F1AF3728A5A18D74127E42
+:1026E0002E5A2A83D5165BB581FAACB60582785B83
+:1026F000BC9796BBD6DAE764E64C2680F6BEBEEF02
+:10270000DDF7E65EBBB3CFDE67FFACBDFED7DA8791
+:102710001C59C7580663EC52BB3C3F99B11C59A0E9
+:10272000FAE36D5B7D1FB818DBD016A2327D6E8890
+:10273000F94B19B31605E520F433AF65FE2E1B6384
+:1027400097F1373D5A3EE014199B04ED7D4F311946
+:10275000FAA5BB3C821FFAD9E7C278458C7E97E187
+:10276000BF5B180B8E28877E3B98974D646C9D6CE1
+:102770000D0585A1E3DD925175544C19FA7CB0FD2D
+:1027800006819D3647C7C5DF69751E3D8CFF57BD65
+:10279000BFCB8D35878E6532D6827D65C6AAF3E0C4
+:1027A0000F9CB7D5B8DD04F34E965369DF9FDAABC3
+:1027B0004630F7F0F33DD3060B2F642CD466A67297
+:1027C000479BC48246C6BEDBE6A0FAAE3699CADD98
+:1027D0006D45543EDFE6A1F617DBA650FDFB6D5EAE
+:1027E000AA77B5D550FDE5361FD5F7B6D5527D5F32
+:1027F0009B9FCAEEB6062A7FD4D64CED3D6DAD54F4
+:102800009F6E62CDB49FA2A063019C47E78346AF51
+:102810000CF06954CEF1A0372FDD6367CC52A4636E
+:1028200026E86639B685E17E2C0E9D3704E7B0DEDA
+:10283000B185DD05A5617272A73002F6FF92AD5336
+:102840009800EDE2E34C86E7CF08C106E6616C91A3
+:102850003CD6278E62CCE5F84A551AD46F974B3791
+:102860009B9D8C15CAF36BD7C4D4E5E4F2FBF64804
+:10287000D1FA18F776D10AEDCB421336DB05BE0E3E
+:1028800096C5D8BD72B96F0DE051388F0511EE03B2
+:102890004E636807B4AFC0F31271FD12ADFF66D688
+:1028A000EED0C1FAC7C8C6722650FF30B35F7BFFB7
+:1028B0004659A6E7F1EF5DA99F6EE235F563FA2B65
+:1028C0008C87EDC215C6310B0BCD1158FB2603FCCE
+:1028D0000F3C0F66D8423B015E9D06B6CC0770EFF9
+:1028E000B4F0F28893D3DFB3CEAAF14EA0A3F14E99
+:1028F0007EAE9D96A05485F397EA3C3B109D5B9D70
+:102900003FCF83F9BEFABAC836CA51FCEC403C80CE
+:10291000F70AC6247B711EF68FE65001CCF3A53171
+:102920002F75A441BDE03B1E8F1EFA6F621E2BE285
+:1029300049F0511DDB09F51726E6A7CD87EE259353
+:102940007E90E6077C398D7C00C609315683F8B647
+:1029500066DD3D63FAA1FCD309FF1809D6F9B83248
+:10296000CF7643A499CE73928DE1BE19DB9CA473FC
+:10297000407F071CD2758CE946F1D268906EC77E05
+:10298000C675461684F518FF729DD907E3B55F3406
+:10299000D5201F612C92A49B02CF2D7E29159E6FFE
+:1029A0000EEA882FB4CBB69000E36EB2951F95A1C6
+:1029B0001E94749E0284A35B4770ECB07D39A4879B
+:1029C000F144614D03CB87F54A2F9B9DF03CE4D643
+:1029D0004948E721EF821AAC07FDA2A74056180428
+:1029E000B6FBD3421B715C36F0D309D85EC73C08F6
+:1029F000877599FFDE9704F5F6C59247CF7BCBE24A
+:102A000064C646E15F3065BBA17F6D12AE6309EF1E
+:102A10000F7F79E6031DA698F8F97DA377B6945742
+:102A20008ACFC5603FE74BC2652044D1E0317BA02F
+:102A30007DBCADBCC60BA5985C6E96619F1D52B95E
+:102A40007939ED9FD918CC93CE387F6A97743521A8
+:102A5000A5FD2EA477911D724D2652A2F60EDB968F
+:102A60005E84877837634E19D707F3A97C0FE0613E
+:102A7000CEBFE1A80CFBE8BC278DF6210A1EAAB345
+:102A8000BB455A77966C0DB3F1708EC6794719F035
+:102A90008F2CF3FD73B13EAA41FCA03F864F8FF40B
+:102AA0006BEB19B5DA7A3A83BA393AEF6F14F91148
+:102AB0000FB778788C923A4EE0FA47F9457A18BF0A
+:102AC000FEA7A427522B19AED346EBCCB4DD59098F
+:102AD0001082A17D6B10FFFED6758E9716989D30E3
+:102AE000FF78BB0EC1C926B081B538EE2605DF3BA5
+:102AF0009DFC3CA374A557E97224D2E598561D0BA2
+:102B0000C6C81D67D0CA8231F3E577A669EA059B7E
+:102B1000B334FDC76ECDD3B48F0B156BDA4B7697FC
+:102B20006BEAA55DD76BFA4FE8AED2D4CBC2733453
+:102B3000FD2B8E2ED0D427456ED7F4BFEEE49D9AA0
+:102B4000F6A9FDF769DAA77DB44A53BF71E0214DBC
+:102B50007F20E386AE04723255E1571D0E6FC49B91
+:102B6000409EAB2593C481C1F300DE69720066C745
+:102B7000CC97ECB1021247EBA099481F2629759219
+:102B8000EBEDF25AC4E71423E1B388F21CEAAB1E62
+:102B900034864C88FF377964E42F2627E763FB0AE5
+:102BA000BDA39DB0AECA1433C905D1C6FB89B659C1
+:102BB000A4A78CDE0A7CA902EA121B6C4F42FEDC41
+:102BC00016F4B95CD1755BA4CD0CE9B732A586F5D6
+:102BD000DBA2EF8B9297F993713E99EB3F5290FAFB
+:102BE0005964783F665F07743A66433EDE0B7202B3
+:102BF000C6EF4ACE1691FEBAFE525C4D65F2B4594C
+:102C000088EF6512FBCEBF40FF2E811D65A02775A2
+:102C1000E9D885E9B0EF976DE58F83B806D6E8D39C
+:102C200023BF9BCC9AA91CAD63562CB70BFDAB19E7
+:102C3000F473379FA81A09FD9E77F9BDB8EFAF83EB
+:102C40000E81FBFAFA78AE67ADCB9C23A35ED6E982
+:102C5000EC3A9A87EBC900B9828420FA3CA857A8BD
+:102C6000FBBD4F394F31AFB31FE5DFAA54B38CFA28
+:102C70009268DEECFB00E0F58CA1FFB976A877083E
+:102C8000D2CA2EE48B0FDA3C3B19EA8F1C6E72B26B
+:102C9000AE622D8CDBB5C62BA6427BD706E6E9409B
+:102CA000FAB057AE4D85E70539CB7569480FAE359B
+:102CB0006BB1AC73E611FCC6B9B7EBD2A1BD6462CF
+:102CC000652D43D92BC17CE9C3E3933E652BC3FD3E
+:102CD0003097F821E2954E063E034BAF4C83F386C6
+:102CE000792D78DE02950407CB455BC8827517877E
+:102CF0008BC52B8492A06E777905AF1BDFDB4AE78B
+:102D00006B096BF5D82A97FF3EA47FFB5CEDB98A6F
+:102D1000E627687D9B749C2E3A53E563289F3B9D74
+:102D2000AEB47639BA4E95AF3CA0E86BEA7395AF76
+:102D3000FC0ECF2023AADF009E6FD5E5A37EB699B7
+:102D4000217FB23CBC99215E5BA4A0CC500FFFA7B1
+:102D500020E1B9AADFAE5668A63AAFD68CF2FA8265
+:102D6000BD9CF4594BEB2E3AAF78B859FA75CC7B31
+:102D700005B8A6143E4DF21D18B05C00F0E9CBB4C6
+:102D8000356C4FA0F78F50F4850D40C61192573E19
+:102D900033F26B831EF455926FB06190071724468F
+:102DA000F28B7539A9BE3A95D7D5715667948FBC09
+:102DB00092FE6DD96A66FE987D6C8079102EEB2E9E
+:102DC000CDAF41B8329188836DFA8B7BFB46A02F43
+:102DD000D5AE19A1E82B39383794A38D8CEC028F2E
+:102DE0007D6E0DD29DEF621E09DF83CE346AF7043B
+:102DF00099BE99D66D50E592EEF2045AAB6C54E54B
+:102E000030A9B65C6EC1FFF75E1690EFC7C8315EA1
+:102E1000905C57E576C1666DFBD8ADDAFAB8D09014
+:102E2000F7DF42B9BF98FF0D7241DBFEB422BF1736
+:102E3000A3FC86922D3290DC33C38A2E73B91B9586
+:102E400083C01772BBC295C846735A62E421A37D42
+:102E500068E463954B26FCF31D150D788EBE8B60E0
+:102E60007C540CE5CBA34D1CDE7DC6E4D05A78EF34
+:102E700051B08BFCD0753DD8437E20B5AF8B9E5FA3
+:102E8000D6A19D7554EF018C1D3CA7F873F5E4A9FC
+:102E90007AAFEF2DA403C6FA2B7CC97C3E7FCC7C95
+:102EA0007DD694F10CEC965D85FE5F61BF4F6AECB8
+:102EB00013913F98729801E913E767CAFCCC88FA2E
+:102EC000333FEF4D9E379B0FC23A1E396942759CC6
+:102ED000CDD41F3BDA06F555B922F133E9BA95CFC7
+:102EE0005A810F54FD1ADAE19D47647924E9E947D4
+:102EF0000D0CF5F42A058FAB14FBEB9902038DFB47
+:102F000089225FCE3A55BD276845FD172C022BEA72
+:102F1000B325BB81176BCF3389B77B49DF2DED8A92
+:102F20006FF732A4E362055FA06EAB847A9952EF2B
+:102F30006242BA04E738A1B6BF0F4D09F76B87ADFF
+:102F400088877B2C5C7F7B5EC1874C2678C2B0FE75
+:102F5000CCDD364F08FA25EBD99E08ECC373483C0C
+:102F60001D7BEEE37BB475378BA93B711DDAFAA3A9
+:102F700072B3807079B40E7474D8B2352FD9FE61F3
+:102F800009439817227ECDD4DBCAD09E5A55696377
+:102F90000857D3A9B1DF8A20FF38A1672817A424D6
+:102FA000F9B16A785FFA69BA678D1C3DFFE7DB907B
+:102FB0007533F6E4650FEB009EFCF52A6B03EABF60
+:102FC0002FC279A21CF93ED8D9D8DE05E78AF59739
+:102FD000C1CEC6722FD8D9F87C1FD8D958EF063B7E
+:102FE0001BCB1F819D8DCF7BC0CEC6BAA7B072749C
+:102FF0001E9C4FBDCD375340B87A455902BA12A234
+:1030000070661F1661BD5FB80C045227B17E13C0F5
+:10301000F5F81899CED7C47C0CE52BF37BCC8897B8
+:10302000571FC7AB8EE337241A670A8C4376825941
+:1030300042BF481EBC31029E9F79F057BB505ECC08
+:1030400013FC1E5C6FE3A4D346AE3F0F18B1FF36EE
+:103050000BE03FF0A11C850E8255004F94BBAFEBF7
+:103060003DEDD0EBA619A7566780FD5D95E79C2F37
+:103070004E85FAFDA72A4643BD73C7A6F968CFDF80
+:10308000F4BD53AF64030F3E9B378FB73F7EEA42D8
+:103090000EB48F605F9B5F0DED29E95C3E6D1358A8
+:1030A0006DAC7E776B1EC7F340EB169273C0DF19D1
+:1030B000C2A13DD347F2F19C7D206539F40F640C29
+:1030C00064DE7905FE1D687D92E4507BCAEF49FFFE
+:1030D000681F94171E9217EABCAABCF844C13D555C
+:1030E0005EACB2F0EA603F7F3E3D7F5CF1EBB050FA
+:1030F00001D5D32DBCFECF55F271B47B003E64E701
+:103100001E4C29FEC60D6857D6881E13D41FB795CE
+:103110005B50DEFCA3C27F60DC20DAF1C199E6D00F
+:103120004E3C54BB4CF498A68E6F77A1D2C5D29476
+:10313000751CBADE1A463BBFBDDABC03F5C92DB615
+:103140003C1AAF7D8A3188FE15B5BEF6FAEBCDA8E4
+:103150004FA4A6A439B1AEF2A78D80F758C24F8F05
+:10316000E35629DBAD32DBC27AE4E766C31F63F5C1
+:10317000641B8B10FE7874609000BD19F3395E55A6
+:10318000304F2D3E370ACD4144C66DB876DC47B28C
+:1031900091FC0C8C65F375ABFBF066F37DA9FB48E5
+:1031A0003606957D909EB4C5A60BA3BEB705F685E1
+:1031B000E305F264824FFCBEE0E7C371674C51D671
+:1031C0002DDDB017D73153E7EDC0F70E7F566707F7
+:1031D000F462B358B388CFF3C1A2FDD04CA2B3E3DD
+:1031E000F215F40E14E41FC6C8AD9B7E2BD07ED81A
+:1031F000FD463A97CD057CDF4F1B434E46066E6871
+:10320000D482E4E1F1F78521F8EB65484FED695E82
+:103210008EBFD240CA1AC4DFD481CCB5B4AF70C25D
+:10322000F388C7E3F8F3D907FF2972408FF0BDDABE
+:1032300079AAE7A8E241BCFC32E64BEAF93A689F7A
+:10324000DE224E07AA1EC5C0CE491E0ABFF5309E1B
+:103250005C18AD1B1D3ED28F0D764F11FA6FDBFF50
+:10326000AA6F48E4BFFD5081D39A142BE9CDED2914
+:103270005C6FEE4D99A3B177AAC1FE11003FF4E94E
+:10328000AC0BE9483FE276F27FE947A28684EB8AFD
+:10329000D34747CCE5FAA804FA688279D552447D31
+:1032A00034819E3AA88FA6CDE1FA688A91F4D16D57
+:1032B000C9C6DAED09F8CD813CAE5FF7E23E12D81F
+:1032C0007B60E7911F52B5F38C929FEC35759F0799
+:1032D000147C57FB9BA466867E31BDD123A3BEA977
+:1032E000B772FDD104DB2C8A91DFEAFCFBF30CF40E
+:1032F000FEB70BB91EAF3373FDE4A6E3427322B8E9
+:10330000FF5981FB7078F737E00DF185729BD18B07
+:10331000FA41B9CD5185FAC170EF81A919FC282D68
+:10332000CA573C7F9DAC27F9237A1C88675D86FECF
+:10333000578EA31D77D846F246D59BC14EF57AE04D
+:10334000E53DFF0114A81B6A9F82DD24E5C3787D5B
+:10335000AB3227F2F140BF2B1DAA4FC6FB0106E995
+:103360003C659793BF171A85EF09ABA68C447C8AFE
+:10337000A773B5CC75BC9EBB02D6953BEA2895EAEF
+:10338000F3FFC9F4E4578BEF3F365F853F97C7E300
+:1033900060B2117A92C36371DD675ADECCF4C05219
+:1033A0009AC4F3248F3F699E32E21199F3D9DD2844
+:1033B0005FBE22129FCDB9B737352DE67C9F6EEBED
+:1033C000CE155D182F88E456BBC80EF0265AEF4282
+:1033D00075FEF018E2CB06E5FC657B64F65880B715
+:1033E0006CD379D0150D425743FF95626AB504F34B
+:1033F000E7B6318F0DEA4E26911F2BF7B29EF02CC7
+:10340000F7E012C2DF31F60121E88E990759704CBE
+:103410003CE4D3E66AA2CBDC9183F61BC50D3EB536
+:1034200087E7235D7FFA045F51EE77B4ED205BC937
+:10343000CF7C4F8B358426E09887251DD6739F154A
+:10344000588E13D771D0F908FA697E98447E1AFD18
+:103450005617F9599E15FCD3F2812ECE84E4AFA203
+:103460007D4B3FE8D7F835EB8E8D24BF22B3497EE4
+:103470003DA0633B13F8916ECFE7F6DCD27C4E5F44
+:10348000B98E3772575460798CCEFB5AE9A813F97C
+:10349000358CF3C888CD14E70A56B122B4FB3A0D37
+:1034A000805709E8F45FF3957899CA8715F859D0E1
+:1034B0004A817DE80545BFDBFDFCF3CF67A2BC6612
+:1034C000A8DC0DD29B3A4E525117352679BC0CFD23
+:1034D0000D82E4E5FC550A3A8218D7F98B3E215E4D
+:1034E0003FA99CDF1AE77A07F6AF76791C4807BD3B
+:1034F000CEC98E3B017E369B919962F8AF8A2787B1
+:10350000922793FEA18EB32A39EF8A76B611F8B0CE
+:103510007C05F96C447F37EA317D53CD32AC77BD01
+:10352000AD3C827AD67A9BBD9CFCE636E017317EB4
+:10353000249BED08E1A1CDC3FD6B36E4BBE8475207
+:10354000F6DFEB3C42FB57FBAD52F88FCD13E67133
+:1035500047B062B09F45F405D1BEB0D819D99316D3
+:1035600033A7A724380E730C1F51E7BD3F9FDB69BB
+:10357000EB73CA2395B43E113D016CBDA3DC4172CF
+:1035800010E18C7AE8A8413D94FC25CF297056C7FC
+:1035900069EFE5FBF4B53ABCD5E9687FFA9E45BE14
+:1035A000B0DE76A73988F22079E215C77B255FD097
+:1035B000F87BA2E3B5CE50C67B0EC7D327974B3816
+:1035C0009E01F94402FC0B2BEBFAA2FE3080A844CA
+:1035D000F61AE37A1560BC2391FEA09666C5AF3556
+:1035E000F43DCE279D8ADD027CF218AEBF31E7F4B0
+:1035F000914AEAC5ED95B4D9629108E7F5099CA016
+:103600005E88DAEFF17A4CA57E80E4992A8754B976
+:10361000F434EA31C6283DA97E97EC061FC96BC178
+:10362000EE23BC01BD4646BAD163BC3701DC24178A
+:10363000879B903245467AA9BED49F4D723EF9A32E
+:103640006C16E33F53F9E1A1CF7659B0FDD386AABA
+:103650002BEA2B6A3C78B83870CA43BFFF4AACBE2D
+:10366000325C5CF86AF1E0BE1423F9DD9E11B47C93
+:10367000C9EAE2FCC8E052FD27FEBFE0393C23F86E
+:103680003CA42F2A7E947D857EE642BF57A79105F4
+:10369000E13C0F7C36D981F871ADF055FDE6598AD1
+:1036A0001E9565DB25209D66358404F47B673774A1
+:1036B00009DE2BF47B07E93923DADFA08C3F5D1CA0
+:1036C000D0A3BC9AAED071F6459115C5E87F6FE5E1
+:1036D000733DCAA0E8ED297DCF5970BC3E9DAFB3C4
+:1036E00010E5438A4EDE1943EF867BCBCD5531F092
+:1036F00069C7784E82F32B770DEA5B6417A9F2D67F
+:10370000A0CA09BBA8911381248EB7AABE13B89E84
+:10371000DB4182E02F41B89EBBFEF7B7E016CF0930
+:103720006183DD79F578C6A05EA30B2D57ED17A454
+:10373000972E83DCDD4FFA558A07FD00AA5E55F609
+:103740003D211FFB79042FD1C924E6A7F23AC6F523
+:1037500040D0AF6E7091BE075B89397786AE88CC5A
+:10376000ABEFAF00FDE018271023E44FFDFA2581F1
+:10377000F87B3CDCDA06E13618CFD3F845B315798F
+:1037800097ADB4CBE81775627C4AEBB7AC38AAADFD
+:103790004F8A68EBD79D8CF38306BD6FBB3279FCF3
+:1037A0001F07DD06F4867C628512B7CC09862A25C0
+:1037B000586F2EEBA2F86076439A06DE37E995BC87
+:1037C00009E61598BA4EF8658BF33EC6F75B5C8345
+:1037D000FE3BD2BFEE51DAFFA17AC5573BD096DE51
+:1037E0006C20FFA819264778FDC3EC0533F1BC8790
+:1037F000F8579BB57ED5ECD87680C33DDB0C9A7626
+:103800009FB78CEC82858ADF7670BFB88E0CBEDFE6
+:10381000ECF2A1F35F7D5EF82F6DE8FCEAB84F0390
+:103820001F42FECA2EC1B94E46B831F440B05C31D9
+:103830002C609C3AAB9979514FCE6E61DE44FEFE0E
+:103840005D0ABCE2E1CC82D3097E33946759363DF0
+:10385000D9ED592D3AD20FB3804F207FB86525900E
+:1038600011D4B357CAA45FDEDAA063281FD8A536E7
+:10387000CDFBB05CF27FAAE7FE348E87FA65230B9E
+:10388000E9703FCDC54467B4AEBC283E00BC4E7362
+:103890007899095EB74E3168FC9CB9E8D78C818B6A
+:1038A0008A07D971CFBFE492347401726E978BF09E
+:1038B00084CBBF02947FB0A433534FEEEA82F5DD90
+:1038C000B496D17E0752AD219E0F31183FD05F1EB6
+:1038D0000B7CCB3CA308FD2C9B24AB0EF3160EA453
+:1038E000F67F9BA532D60D6A71750E633FB10E94BB
+:1038F00008503FE46AD8D27923B45B065E40E7AF54
+:10390000CD16585013534F49695F5083873685C988
+:1039100022C0C78A33C03EADD29CDD7A98DFEAB6BA
+:103920009153D2CA06E994F6D371BDFC28E67D74A2
+:1039300014E8487F62B1EDB08FB20249A1036F1164
+:10394000F18F1A1EC78F1D5FB45F61FC3930FEC452
+:10395000CF31BE99AF3F131F81DCC9C4F5A3DF1A75
+:10396000C7C7F345E751ECFCCA78220B6EC7780B4A
+:10397000CC6713F87C12E69564326D1EC1E07C12B0
+:10398000CC57FA77D84FEDD0F3305CE93C6EFF7C32
+:10399000E7D1A1F3D27A83E36D64173168D64D463F
+:1039A000FB83CF6711D921B19CC3B5637214AEA05C
+:1039B00007D2B8D07DCD6505CE0684B36424380F18
+:1039C00007B73E89E7356D90ACA135CEFF03E7E53B
+:1039D000E0E7153B1FEA93D73CDFED309FFDDAE7C8
+:1039E00043F822FD0CC217CE646DE6B5C317561519
+:1039F000BC16F8F6C1B8BA18B846F3879E92D02E16
+:103A0000B0187C660FF0DF9B0A5249DEBAED0BCC92
+:103A1000944F90B1C08C797AEBDCB61ACCE75BE7B7
+:103A20005A6436C4C8E975EE3A6A87FE94F7E40E24
+:103A30005BD16DC14A5984FC021B6EA8762C47FCF1
+:103A400069E679546A5E912A0F9912AFA47DC18B01
+:103A5000236EDC3BD007FD37344FA4BCB111A9FF66
+:103A60004EF9529B1A3C1E6CFFB685C71D9F54E24F
+:103A70004E88A8E4571B7FFD7730FE5A5EB04AA0FF
+:103A800078E3CA2BC71BCBCF47AA30EF8A2DE77943
+:103A9000558E3A314E1E6AE97613C295E73F85048A
+:103AA0000E5FCD782D05193C1EEDDAC1D0EE7B05F9
+:103AB000C6D26BE94B877948F1F4281ABD5225EA42
+:103AC000EBAB74B48E6C0CED83882B2F9DEB580EF2
+:103AD000CF73EE163D023C1FE97E98F29140DB2742
+:103AE0007DC3ED3E5685F521FB5CA1DD47FCBEE2C2
+:103AF000D70D828BD6AD9E57F9794F12DA57E5056F
+:103B00000B285F8C7E2ABDEBE3F6938E76B1CE6BED
+:103B1000198F7641CCBE98A69F62BFFDD7D6EF44E1
+:103B20006442BD303E1EF64F3E5AA78979CC467A94
+:103B3000AF8EEC4835CE9685B483E73E9AF1384592
+:103B4000FCFB93F9FBCCC1E36E262B98A4407FC20B
+:103B50007D56F2679A4C5087F3118CCC3C0A9E3FFD
+:103B6000ADF803D7084CC47A74BE30C3F9DA05DF68
+:103B7000668F134B6E4719527D946F8861DB587BBB
+:103B8000B40FF338A07DD5BDCE91E8CF1B01041151
+:103B9000417B5A8953A9FE9394FCFEA528BF5F2C54
+:103BA000F8688119E5333A9CAE676CFFCED35B822F
+:103BB0003951BA345DCC62728C5D63129B299FC30C
+:103BC0007471B4C6CF1256EC31B5EEB58BD5385FF3
+:103BD00004ED05CC5F625207BE5709409163FDA614
+:103BE000171D9A71A2E3E768E60D835D1D1B171888
+:103BF0007EFC242617C58E9F37CCF88571E34B09D0
+:103C0000C78F8E9BAE19779DC8F945D06E0D25F2F2
+:103C1000F39D2DA87A1B4979B87CB33305DC0F08D6
+:103C2000FC58A4389482378F389A29FF4C6FE5F1FD
+:103C30005283123F3998DCC0F32472B4F967554CB3
+:103C400012B17D5DCAACA302B457D9B47AFAF44B71
+:103C5000A7F5C877A68B5A3DDDCB9A093F6F62DA8C
+:103C6000E7861C2D1FD8A8D0872E796284F2D43223
+:103C70006C9477309C5FE1DD3646F95386245F33E0
+:103C8000CA3863E1A5B4750EA88FE0F8652F4C5DC6
+:103C9000887EA277153C5E07748F70AC5B3572BB73
+:103CA0003E66DC3A63B800E5489D8EE7EBD30FE64D
+:103CB0007F37238BFCACF1F352C66F8CDFABBE5960
+:103CC000F0B962F6F1AE421783F3ADCEDE8E7AEC38
+:103CD000E07CA6F0249A6F30EF47992FF38BCDF755
+:103CE0009E42CFEA7CF55FD5EEAFDE18A1FDD5EBA5
+:103CF0009892E7CFE77B0FF7E7FC02F329F95B83A4
+:103D0000F37D4DBBBF7A5384F6573F684F2AF36566
+:103D10007EB1F94CC6668ACF3C26F0739DBB6BD44E
+:103D2000E3E8A7BF3077958CF8A6DA67B7E00B8099
+:103D300067B728F94DB7E618496F50C7DDDD3685FE
+:103D4000798DDC9F8365D10D02E5FB8F9B22783155
+:103D50003EB60DE8DE5B88FE2A89DA436D0E2A77CF
+:103D6000B4C9547E17EC412FF9AD3C54FF1F85DCDC
+:103D7000CE7F6C94B46405EA0B95569EEF7CC334F9
+:103D8000D044A3F61618607D16CC2BFC322BDB0832
+:103D9000B5C2AD1C1EF6EACC109E93B5EC50A40D36
+:103DA000EAA6A97A19F3B84D4EE64BE48F692DE4E3
+:103DB0007E9E47D4FCF81B051E7F077DA412F6BF2C
+:103DC0004C0135D3CF1550AFBAF56BA9A48FD42DC4
+:103DD000EA4F96601D7708656FBB001EBF51F491D6
+:103DE00065A3391DC7DB9376942C13317F4F1F0ACF
+:103DF000C19F0B9317923DBA70316369F0FEADF825
+:103E00001EC895E38A3EF346BF89A1BD16ACE67194
+:103E1000E73B1ED6DA918F59C212EA718F95D919F4
+:103E20009E475D8BB6FD11258EB030CEAEBC352ED3
+:103E3000AF06B44C9E1F827B9ECAD80385DABC9A1B
+:103E40008A4299F3B91C3B2555A7CD768DC078A43D
+:103E5000C998F81E8E3ADE33AA5CB67B090E6A1E3C
+:103E60001AD3BF5846EF2BF3A9EF3D2DBC38EA4AD1
+:103E7000FE4ED0DB3EEC2FE2F219F5EB8D71EBBC80
+:103E80003037EF1BD52C11DE0E88E85750D7FFBF17
+:103E90000B5FABD1A70178747CC6A713290EC37240
+:103EA00068DFB7A8F8A3E4572D1CAC8B4C8CC9AFC6
+:103EB000638E01379EF75B3726793612FE29FA4367
+:103EC000F81DDDE5A4CF3FDEE03A1CDE5CEE8FABF3
+:103ED00096283F48196F3838C7E73FA87E1BFAC5B8
+:103EE000E41FB66FE7F98F59F6AA8FF19E143E3F93
+:103EF000ADC12BED7DA8F6DEE704B42FBE8DF7BB78
+:103F0000C4E87CE8BF0D92FEAABDA715BF2EF5FE42
+:103F10008DBA9E76232B227B5407FC01E69B67EB30
+:103F2000170519FDF10322C5CBC7723F11E608F34F
+:103F30007B2F5CCFD367EB783EC71899EB7DAE81C2
+:103F4000D1B1F1A28F0AB95C9F97F4668B0CF2EFA6
+:103F5000FDC2C042CC579A37E2CD1627D44F153652
+:103F60002FC47CA679D96F7EEA049DEDB7855FE109
+:103F7000F592373FCD83FAFF2A5CC5EBD31801E5F4
+:103F80007785AB17225FFDA85052FC97911C9C6F60
+:103F90009EC0F1E58B967A932E613CFF7CA1EA4F9F
+:103FA00064069CC7D7F3AF27911FF954FFAB571B8B
+:103FB0008764D89489F786949F3D85F49939F837BA
+:103FC000C0F36631DC8BEFEBCC6182EB58CCA329DC
+:103FD000221478E2F215F225E2F14800746D457D75
+:103FE0005996581DE8C7EDADCC6FC98FC173E65522
+:103FF000F09CE7F5A8EB51E71FB22E3852312D7631
+:104000005DDB681C755DE7CA4C41BC5FA6C655D533
+:10401000759D13069E4167C49C929D8BF15CCF25D4
+:104020000F8C16A0FEFCD8B7E99CCF650C3C23781A
+:1040300062EA067E8E23C73E4A7A4F8BE01D391610
+:10404000F9A5D146F7D83A153D6F53863FC8B87EDB
+:104050004FF98FC15C7E3FA07AA2E08D8DFB3BC7FC
+:10406000F2B8494829679A36379F007C0CEC15D87E
+:104070001AE81FB874C188F6F8BC9E5346B4BB9BBF
+:10408000F69E32A25DDD847518A7699B91F8553CB8
+:10409000BC778ED56BE2EBAA3D7138B7709D1DD60B
+:1040A000D3B442F060CAECAAFDA933B1BE6A39EEBE
+:1040B00092B1DB6FD83313D1A5DED7BB0ECB65AC85
+:1040C000FF30DE9F5BE2D7EAF94B1BB47A797DB310
+:1040D000569F5EB6194E07E4D7B2D66CCD7B0C3531
+:1040E0006458CF12E53C97381E8DE8C7633DE65E05
+:1040F0008E40644DFE9DA57C07506AFD16F37A0440
+:10410000A2E3A65A33F95F0FE7F27CFAC04A3DE515
+:104110000905101DB0DE2C28FE2C2FF147557ECF4F
+:10412000EC3E7F241BDF5F692038B0A037827EFD24
+:104130005A059F96D5D67C8C78562BDFC7E5F89824
+:104140005D06F2AFF8B93E2E2BFEEFBAEEC7AAD34A
+:1041500050FF6C11C8BFB1B441ABAFD7E31FA8BFCC
+:10416000B50AA1B013E1A46D5FD6AAADDF355691B3
+:104170006325AC04E9A461AC2012DD28F53FE6FE1E
+:10418000E28D304CF490E0BB7F2C1CD04A63783C2D
+:10419000CAB587043FD5D57678DEC4E50E97F73AE1
+:1041A000A028E2BB06EE5708360A848F4B87C8FF6B
+:1041B00018FD403FB4FECC582EDFDA2DBE16B29764
+:1041C0005E1524D447AA45AF98E68EDAB3F1F8F825
+:1041D000AC82DF6FB07E37AEAB10810EF02F5C3853
+:1041E0002284FEB0C29F2CA77CC7C20AC1A3237A37
+:1041F000D6B1D6722C45E20FA86F5AA02CD477D531
+:1042000012BF9E6094783EA183C5F201EF734CC04B
+:10421000BC3E5C3ACE7B73CED1CFF01C6FD9FAE8AE
+:1042200079E477AE7C6FF963B0BE4D163EFFA6FD14
+:1042300002E9AF4DEE23C41747029AE0BC4D0E854C
+:104240003F76037F54F70FE73D12F9155E1099EBA7
+:10425000A67947A9F10135DF365CA5BB0CE73752DB
+:10426000997767A94CFBCEBCAF4BC07DE7B2E01A93
+:10427000F413FDF3584670544BD58FBF381AC776E8
+:10428000E279363AFA8DA47F2B71EC04FD4A12F6DE
+:10429000F3328D1F61A6FE520AC69B57BD9A7FC599
+:1042A0007C0BBD59A7A1578364D5D0F5CD455A3AAB
+:1042B0009FE7D1D2F7AD53F235EDF3BD259AF685E0
+:1042C00035159AFA62DF344DFFDB6A6768ED7DC70A
+:1042D0001C4D7F8BBC40534F2ABA5DD33FD973A787
+:1042E00096DFD8BB28AFC0680EF6FB010E9D80ABF1
+:1042F00053D2A2FCBA24C58C49C7CC5A61B161D94A
+:1043000059660AE3B97566F138ABE9B5071C6184F3
+:10431000FA8817CD9550BE2084AA305E6456ECBC56
+:10432000E28799869F8F2DE178AE96EF8FF57F5CBF
+:1043300004A57BB79CCDF3A723C5783E66742022E5
+:104340001EEF3393DE31214EFFFD5E69E56F51AE06
+:10435000B81FF6CE26BF543793F0FEEC0E23CF7372
+:104360000AEEE3F9B4EEEE7E9D3786DE02455CDEB2
+:104370007FD35745794B4D3D20CD10BFB79E36A218
+:10438000DFAEA9A73705E5C678DF6923EAD7D1E70D
+:104390008A3C1107AC18BFFC97AEC4F969638A8CDC
+:1043A00034FE1185DFD63FC0F92D20DC5CB48F547C
+:1043B000FE59BF87EFAF7EB191E85BE5A3C03F3503
+:1043C000F1B078BEBCF486D03AA45DE0A31AFB65D8
+:1043D000D9A2591FA33DC45898F418E0A3DAF69C5B
+:1043E000F544DFCBE2EC9BE422E0A7A8479430F74A
+:1043F00065A097933E5DC27DB94BF8F7024EFA6710
+:1044000010BCBF097043BBF19B43E0C4E17735F8B2
+:10441000BCA4F813D5738AEF5756C2F9E84BC3F022
+:10442000CB078A78FB0E21528ECC2CE0B3129E2E45
+:10443000359B1763FEC191DC3FADC77842FD0F0489
+:10444000B465D9AF7B5FCBC47C04E39EC399982746
+:1044500011E83A9CC9004E2B0DF21AD48B010F3C87
+:104460006BE05C9ABAC3B4FEC6AE8A5E7CDED82D21
+:1044700078901506F69E9F45FB64FDEB518FDF316A
+:10448000CCBAA615717D785691CCF398FD3027CA29
+:10449000D9BD26B263EBF7001FC275ED17E85EC603
+:1044A0008E0DE6DA44FAC9648437C0E9D00623C326
+:1044B00038CA4A781FF77124F788D18C78B347201F
+:1044C0009B30D0756231FAE3032D0686715B757DF2
+:1044D000677223EFE3FEDF596160788FB07D058F4F
+:1044E000C7BED3A2A771F4771BA8BEE45E9E377C3B
+:1044F00070C56FD767C3B8EFAC1428DF7EC6DDFF89
+:104500007604EB4BEEE57A503CFE0EE26B1C7E2E01
+:10451000F16BF16E089E367C313CBD338AA7E351C6
+:10452000CEC2B9CF1C89F8F320A37B8CB5970E1AA5
+:1045300046C27AF3D64B1E0CED96EA43EB32912F2E
+:104540001CE4ED652BB70B9CBFC874BF3DBBD3C843
+:10455000D06E7C4039AF0794F392D98080F96E4CCD
+:104560008CE4E1FA9C4A7ED7CB0656BB07FD482275
+:10457000E72FA53F746C8FF523B914BEA2F2BD12CC
+:10458000B0F7F7901FBA2B0BEF9DBF64E0FEB1D1DF
+:10459000CA7805F903B3E643F9CD22CE07DB94755B
+:1045A000A875AF82FFCCBE83E03BCFCCE13EA73500
+:1045B0005C87FBB847F4AF2B82F6B9A37FB1925169
+:1045C0007EE4EB6E3FF9B98A49AE0594F33838F5CD
+:1045D00077DB56631EDE382B9DE3FCBEA72278AE48
+:1045E0004D2E91F20F2D051347FAAFE047085C946A
+:1045F00035F7F89A7ACECFF226A0EB69CA7A4B95B6
+:10460000FB7AAC87FB0F801F8B53CAA3FDD4FDAB95
+:104610007E0F4BC177E99C567F8595F17BFC8FD14E
+:10462000FE97AE3C21E03D95DB0C5E830DE0FC8BFC
+:10463000116C31DAC1AFB731BAB7760CEFAF012BDD
+:1046400079A34DA27A44B9C7F6669B4CE56D46DF67
+:104650006E84CFE243CD0508AF83B94FFAF0BB0CAF
+:10466000E78E29FA2C93F8BD4605F72EF4E8991940
+:10467000DA2FEC1542E43451D67FC7C52CE6077E0D
+:10468000F22BE5BE5C63EBCF89CF791ACECF423BEC
+:10469000A36CE5A9F5580FB4FEDB2CD41BDE07395B
+:1046A00081F815E8169803C6A9BB9846EF37769FA0
+:1046B00030A23DFF926E6016C23F7840A07B5681CB
+:1046C000E6F3C43FB729FE958F8A781C31D053A6F4
+:1046D000A3F3F41673FB4439FFDEE27F4F41FE651E
+:1046E0006E958F4FC3733CAAA773DC583590222573
+:1046F000389793302EE68FFC4AC9D38B6FAF3506BF
+:10470000C92F5BABE06D7CFB070A3E02840D4A9E1D
+:104710001213603D750A7ED5E3F761D250CF17C200
+:1047200056A0DBFA9E19E4DFA86FBEF2F75E86C3DF
+:10473000B76B2D9B18F76FA875B4BF62F3B8D0FEA6
+:10474000D2DE4B0FD23E4CB9AE91FE2BE87781FE04
+:104750002C8A9F3475328A97345E2CA6F2ECFE4781
+:10476000E81E94D93AF024CA0556A823BDBE31A844
+:10477000D56F8E17733A385ECCE9F95211D8276697
+:1047800036689F801D7219F112EC90943EA6B14FCD
+:10479000E29F937D6256FC86A02EF95F4EB0EEB785
+:1047A0008AABC4711948579B09BF19E037E255FC21
+:1047B0003E478CE3EB52E97949DFC746D47703DD06
+:1047C00089E9F937C5952370DC0DC3E4E5BD5DCCFF
+:1047D000F95DE35646F00A6C4D23389D615B7D55CB
+:1047E000809767601D784FFD9CCF97940AEF9FF3E9
+:1047F000FB92303EA7D27FD3562BBDB7C1B5201D4B
+:10480000BFABE11AC7BFEB73B67B8619E17CC75615
+:104810004E77EA7CEF8797A423FD4C320C18D13FEA
+:1048200099D3732A05F5BA49FB17A623FD0DB74E98
+:10483000BB721E8DAD598BE91E10FCF440F7F72BAF
+:10484000722CB0366C44F8DFDFCA087F7BF7FDBA04
+:1048500009E9F76C4F928472F2CCAB4941E4F7E777
+:104860000E98423A186AA5F23DA43386FE5B487F53
+:10487000DCAFA77C85C0813F3C89F418D867A27B58
+:1048800035F7F73C721EE5DCCA9ED91F8B58BEF87F
+:10489000F7A587C6D6D18B63F38EFFD0B63B0BF955
+:1048A000E75991F389FBBB5F217DF6FE4B17C66389
+:1048B000FEE09957FF6332F2B3C04F2E4C463E16CE
+:1048C000F8F185C9D81EF861527322FD646609FFAC
+:1048D000CE862A1F9D6F891A3FCB39053F9C1D9BB1
+:1048E0006BF0BB05934E2CA23880DA3EA940E7C39B
+:1048F000FE93DEAE4EBF3BE6BD8E8848F912134FE5
+:104900005427AD88C1CB0F8A0DAA9FEEDAFC234A4B
+:104910001E82EA1FD91011F93DBB067D08F37B9773
+:104920004678FC3DDE6FC298EFE6523CEF7B333CAD
+:10493000F8BD1EBCA78E7191730F1684E89E7AD0C5
+:104940007CD815A3072D89E8C226F483F498C2A861
+:104950000F2D8988A74C317E91F7A597D7A11ABF53
+:10496000C4AFF563C4FB41E0972CC6C44FEA5BC2F9
+:1049700006554ECD83F97FB18E4918B719E21FA9AC
+:10498000FD12F961E2FD2472E40933BE27BBF8F79A
+:1049900075543D13CF6B6F027AB72974A2D2514779
+:1049A0004447E7D011A932BBA03428ED7B416C0607
+:1049B000312FA867E14EB4D33B2EDD9684F0EA7820
+:1049C0006B01C3EF479C93AACC05F8DEA52F99177E
+:1049D000BBA3F831847F8CE37265501F1846CE1D4F
+:1049E00051F8D6DF4BDEF58DFBEF21EFC0AE7E6DCB
+:1049F0001CB7AB9772BF07B7ABE3E584CA7FD5712D
+:104A00003F53E03D94FF7E4CFA0BD8BFC47F3F1B61
+:104A100027F3EF34F4CC4F27BBF8AD45E9B26DE88E
+:104A2000F8F9A24797E61E3ABEAAAF0582DEC36632
+:104A3000B463BC3CFF34B048A0EF48057C02E9D920
+:104A4000813A4308DBD5F54416F1B8E0628F40DFC8
+:104A50000551F53F553F1C6C9F08EDCEA8BEA8EA56
+:104A600085111FF78B2EF21AA8FD36A37F60DC2478
+:104A7000DC9F859E4F9ACAC7053E7018FD9FB77D83
+:104A800059A0EF76A9FAA28A9FF1FAE4273DF957D7
+:104A9000FC1EDD36052F55FA1A1D4717AA9C7229F0
+:104AA000F06942399D8E72FA3363BF6D78BD1BE4A5
+:104AB000B4584CEF31C2DB896F8BBE4476F7B7C672
+:104AC000717E6C2F56CE2D72A812D79BCB229417D5
+:104AD000359CFCFCB498D3C370EDAE715CCFB91AB1
+:104AE0001D4F2FFEFBD2F1B4E2FF1E743CA8FF194C
+:104AF00013EFF3ADE2CA6A3C7FABBE99EE4DB19FB6
+:104B00001AC86F1DDFEF3305FE20CF34787C38D70D
+:104B1000A843BB27D0C0EDFECE54F938D927AFF15A
+:104B20007BF8F72BF94AF75D94A8ECC40F8561FB7D
+:104B3000034EF2DBDCB7FB84C10BEF2F6D11CAD043
+:104B40001FB4B441BB9FCE0CEFEC583F78E7A82EC2
+:104B50008A2B0477E6CB387E3D6E16FD219D5921C8
+:104B60008C3D36A11F67023E8FB98701F3342ACFEF
+:104B7000A729FE1D16A707FCB8F71DF2F7605C0811
+:104B8000E9D7D823505E48E028F77734F570BEF0B7
+:104B9000518340FCE423253F23D06A21FFB6AA4776
+:104BA0007CACF4BBF74181F4BD217A85571B776952
+:104BB000FCEEDBC417E3F588B4BD7C1C8CB7A05FAA
+:104BC000E670EE6401EB8D60178E447D51966FCDDB
+:104BD000E6EB6321E22F5E8D1FE593A3BF253B72B9
+:104BE000E97E81A593DE11177FE99C13177F397247
+:104BF000381BC751F40C09FE0FFD87F17A4653F7B5
+:104C00000903DA05578BB36C2ED6FA05C788DCCFBB
+:104C10003AA64790D09F344681D3751BAC04A75960
+:104C2000EFAD48473A57CFE7EC7C7E5E67DFF9B4DB
+:104C300012DF9BFC9E2821BFFDF13B2D3FCFE67587
+:104C4000D92CE37B2D4968879C7D6F5512C2F1C733
+:104C500050E2F7927E78524CE83FFC6BF1A0DF788F
+:104C60006731CAB78715BFB108F22D39EA7F897F4E
+:104C70002FA784F3A94EFC8E11E2DF7E1EDFEE1C0F
+:104C8000E59F43F5A7F2781EB1C8F1F5959E54094A
+:104C9000F5BD12D82CC661BF6F651D185FE9CCF059
+:104CA000BF4EF4F1948EF017DEE7DFA1D82393BC5A
+:104CB000C3D014C63FC683AC31535EA39DE220EA45
+:104CC000776246811DAA7C576111C65D4B9438C836
+:104CD000782B1371FC4D06FFC6711877E9153D6BF3
+:104CE000F01DD1938EDF458A8FC7A8F161352EA3C1
+:104CF000C689878BCB0838CF788E67B1DF3D51E30B
+:104D00002FECCB3C7FB37D4A33DD8BDD8E3112E25D
+:104D10009F43E2297F463B353E9E22A2FCA1388D6F
+:104D2000369EB6B1E865C2B7CF1B479B5E3CDCFC44
+:104D300032B7E7E2E69F98FA4926D92F7FF9730A3E
+:104D4000C9B39E0B2477CE0D9894FB9DFDDC4FDDFF
+:104D500063207BFD1CD8411931F26CF9380E87BEF7
+:104D60009E19848F7B23D549D8BF53D17336BCB5E8
+:104D70006821EAD3C188C8F3B119B76BF646C449B4
+:104D80005C3F180227A93841DCC96C4D9C071456BA
+:104D9000FC056165DF33DEE1F64AA085C70F248597
+:104DA000DE023546E22747723305D58F3C32517C0F
+:104DB00061FF00F1D9FA7B797CF79AE30BDDBD0640
+:104DC0009697C06F5B338BF8CDB5FA6B195AC193C8
+:104DD000A3FC39AB44E127A58AFFB698E7F3A735D2
+:104DE0009755E2F7EFC2C39EB77F634982F34ED077
+:104DF0006FABFBDAE281BFBEC6B8616AD1B5F51B05
+:104E000093881E12F49B7E8DE37DF31AFBB55DE360
+:104E1000BC0BC725EAF7FF68FC333EBE191F0F8D98
+:104E20008F739A5EBB3B886D8F088F0E8411BA29F1
+:104E3000FB6A05205531F5BB66E46B73A7F278C0B9
+:104E4000866A7368BB108D8BAAF00A9672BD4B728E
+:104E50009F0FE27712477B23D5E940C7E7A632B21E
+:104E60001BCE5994EF2389D2A8F9747E127D1FA717
+:104E7000D39238BE3451196F383EF2BDD2CAF548CC
+:104E80002FD230DFAFC82DE17680D4CDC85FC344C8
+:104E900079D4029A571E45DFDF3BC49FA78419E5EA
+:104EA000F741BB7301E9CFB213D7B745897BA5CDD5
+:104EB0002974A29F2E0DE42DC6451EC3F808F9F5EE
+:104EC00025EAA7CE97ECE6F36D313001E358C171C6
+:104ED0003CAF82757C5F13D73866087FB05CA0B8A2
+:104EE000C6765CFFCF7461F70E273F1784AF7BAFA8
+:104EF00044F19637A67EAF88EECB2B718ED512EF9C
+:104F00007210ED0C58C7EA572B087F97F64DFD65D8
+:104F10001DEA832E91E03C440F57ECAB938A7DA8A9
+:104F2000DA57FD6827C6D81B3F50F4860474F58312
+:104F3000447C698BC0EDDFE0CFB8FD5B61F4E4C772
+:104F4000E653F52A7192E561EE8755EDDAF1DE90D0
+:104F50002E13E050F1A03E6C02395DB1BED488FC46
+:104F6000BA627DAE95FC4A2BF6E85478273AF79F53
+:104F70002AEBDC707480E212AFC4C52793DD466A69
+:104F80007F48C19F643C5B28571788ED287E47DC2B
+:104F900020E913F9C5EB41EFC7F52DEFE4EB55E33D
+:104FA00020F5617906CE73EAF0C07A2CCB1B9C33D6
+:104FB000C86FB8F2FC7A949B814B178E4C273F80C8
+:104FC000514E745F604B29F71FBE828A08C26BB6D0
+:104FD0004879BB15B3453AEFB47A0BD9E16906A617
+:104FE000C7EFB0A6CDE772ACBCC63E03EB6C512A4E
+:104FF000C9E1F2A372EADDEEA89D9F36BB2503E16D
+:1050000074B5F890EA2FB8CDE8FD6349C6E78F0F75
+:10501000351E7B8BF2CCEEE8D7C687D478CF70F103
+:1050200021353E1BA8F954134F0E8803B3D0AF525D
+:10503000F1EA298A0F07BA05C9E18CC68D027BCF38
+:105040001B09BE4ABC08FA1BF1BD0A38F65169F8C3
+:105050001D021E3FDA87F9B846FCBE9E4479B73F71
+:10506000C27CDC42FCBE1ECFC73D80F9B846BCFF07
+:10507000C1F371FB94FCDE40CF798A37A5B987E490
+:1050800053513CE221C197E19EA48957503D3E5EB9
+:10509000A1B7723B3470D440DF3F0F1C33139FAD78
+:1050A000EC593E06F531F5BBE44D182F88F12F9DE4
+:1050B000F57A2C78BFE7ACCF63C1384145EFC746DE
+:1050C00099F84E381B53989AC48811ED7D8403E5F6
+:1050D000F9F5545A10AE57F5EB77FF7FBFFEE7F1B5
+:1050E000EB7F2B4A97C43FCA7D3ABA575E7ED46B9A
+:1050F000B93B863F6CF071FFF006571ED1DF13BE3F
+:10510000BCD415B17EFC1A6EBFA5CD7659629FBF87
+:105110005BCAFDF86942E2FB0577B987E5B777B965
+:1051200013EA3B89E3011B6A381F51FDFD43E3038A
+:105130009ED75C317EFEB33F33D3BFAFD0BBDF44DD
+:10514000F2FC4FAF9A76A0DE5D5EB3624C32D4CBF8
+:105150004F9A9893CB234D5C61698DCE6B4949146E
+:1051600047F066D3F743E3E305353AE2EF83F18294
+:105170001AF114D515FDFC8EF3BF4BC64F94BE2219
+:10518000843AD1BE78A551F0F4B2A1F10318389B4E
+:105190004D815DD4703BC1536B26BBE06A7185BA0B
+:1051A000BD27D6A19FA08C6DEEC4EF5196B97412A5
+:1051B00088A20471059EDF59AEE811F1FE01C40F0B
+:1051C00094FBF17EC1AD6E6E9F6F55E47E5E0997D4
+:1051D00033EA38EA7BF1E77EC6AD8D3FC4B7BFA79F
+:1051E000B477D4946FC0730BCED531E4FF1D355521
+:1051F0006657CC782FB879DECC168C53D863E3147D
+:105200003C1E111F9F50F95345EF67B3F0DC9FE838
+:10521000E1FEA38083FB332B0E54D23D93E83A3951
+:105220007E3EE118BC6798CAF8BE9899FBB9C8AF32
+:10523000503EF7D33EFCF707982F95FE3D83C031D3
+:1052400057BB0DF9C85C719220937F7BD0DF8DFE38
+:10525000A885C71BE6603E70C5E2B213782E8BEBC3
+:105260000C9477B4F0782D7D675C9557158BB7AFAC
+:10527000B5627B91E0B1C8D85E5385ED37BF184663
+:10528000CF1E9B87BB077A891C83DE79E4DFFE296A
+:10529000DA4515F315BF771D97AB8B7BE61BF847F7
+:1052A000AFB472EE60EE9FC86EBED05341FEEC7498
+:1052B0008CB7BAA372A6E255903FC951F9F3B7CAA9
+:1052C0009D336E9EE73F01E40FAE276D3E8F0BC608
+:1052D0009FFF0B0A3E0D274F86E39F283F745338EC
+:1052E000BD088EA8DC95D19EBE2E2A7FA56EA88F04
+:1052F0001C1EFFF215BC4E1D46FF1A5D2A28DF1B3F
+:105300001B265FA3FBEFE3F7CE2A55F9E7FFE57E07
+:105310006FC5BE51FDDFAA3DD4A2C0592D1F50F468
+:10532000D9BF395F198562C27CE5B4C4F9CA777404
+:1053300009F41D16255FF9B09155EEB1639E9E727A
+:105340002F21E423FDE6F0D3BF5AFF9C1DEF250873
+:10535000128A9DC6AE13249F1B419F213DA8E70FD3
+:10536000DC2FD5C5F34B1BBBB5F71FD4725B29BF30
+:10537000AF500DFB213FB292C7376B2FA7EB80D701
+:1053800018929DE817FAAA18EB170AC8910C353F36
+:1053900030C4E552C23CBE263640F97E4D0D820730
+:1053A000E5C117F61379797EDFB5FA89EA4BB57E48
+:1053B000E6B525DC2F54EB1704D447CD3ADF4ACAB3
+:1053C000EF3D204889F244572BF87EB3E2A7DD6514
+:1053D000E478B0EB7A81F26AF15E0C9EEFAE033CAA
+:1053E0007F7E5739CF9F57FDB26A5EFCB8A85F96A3
+:1053F000EEC3A8F9F46A7EBC7A3F74FE566B18F5CA
+:105400008B4D862E07D2A19A57E42AE572CEAA7C4C
+:10541000773C7E9DCB4A2B5DA518A72BD50DE7E7E2
+:105420006A2B4DA0DFBCAEC8CF75A5C3EAE59DA52C
+:105430005ABD9CEAF17AF97F955F76CCF07EE15F08
+:10544000975C9BDFEA96C47ADC907E95A509C66BD3
+:10545000B724FE8EE8EF54FE1BF7EF8FB021F77BE9
+:10546000B87CEB14E45F4EA3389781E25C2A7FE9B5
+:105470004CE6E3EF53F88A5A9E50C61FEE7B93EF3B
+:105480002AFD5A04EF0F70DD25BBB57EB2D22EADDA
+:105490009F6C42779AA65E16CED2F4AF389AA7696F
+:1054A0009F1429D6B45F77B25C539FDA7FBDA6FF05
+:1054B000B48FAA34F51B07B47EB2E91717C4DD3BDD
+:1054C000E2F85D091811FBDE0CF35D9A7ED90DDA66
+:1054D0007DE5366BF735A655BB2F755C6750BBBFB6
+:1054E000FC4EEDFED2D07FEFFEE2FEFBDBDD32CDE7
+:1054F000D3D7934FDF03DC52E3A2EF5EABF7FFFE9F
+:105500001307AFFB52406F000000000000000000D6
+:105510001F8B080000000000000B53E16760F8518A
+:105520000FC15BF918182EF021F8F4C01CCC0C0C3C
+:105530009C40ACC8C8C02001C4FC40CC06C49E0C32
+:105540000C0CFF81F81B10BF05E22740EC0CC407D0
+:1055500058B09BE3C6CAC0E001C4DC40B378988968
+:10556000B7DF8917C17ECCC3C0700E889FF1D037DA
+:105570000C061B5E27403FBB7E43ED3A2932F0FE0E
+:1055800006612131609A1447F0A78AA3CA0B8B21C8
+:10559000D8C9D294D9950FD40F00F19321F080038C
+:1055A00000000000000000001F8B08000000000049
+:1055B000000BED7D0B7C94C5B5F87CBBDFBE92DDA6
+:1055C000CD26E44900370960501E4B80C84BDDF002
+:1055D0003252C40411828A2CAF10027914A9A5FF9B
+:1055E000DABB0B2804AADE5851A37F6A17041B2DCF
+:1055F000DA80D11B6DE02EA208D56A684551AB0D4B
+:10560000888808498C8F6AB57ACF3933DF66E7CB53
+:105610002E89B6FE6FFFBF7BC3AF1DE79B99336733
+:10562000CE3973E6CC9999B32696C20C9733F60D12
+:10563000FE416A3331C6C674A5ED4AC77035A7ABC3
+:10564000FC36BF9779CD8CD5F9AD946EF1A733EFC9
+:1056500060F8EE331406ED8CDDEB7751FE17FE4259
+:105660004A6BFD4554EF4E7F09E56FF7FB28DDECF3
+:105670002FA3EF35FE6ACA6FF0AFA17493BA280D5D
+:105680005082BFA2C2AC64C6AA9EC9C9DB0CB92DA8
+:10569000B3C627A8A321FF8A9119B300BE4FA5FE68
+:1056A00098EADE347074573D0DCF4DEAA47E08A70A
+:1056B0007609C78B59992D46BD2C1CE79D4B043CA0
+:1056C0007B6B4D4E72D47A8311DEED25006F28146A
+:1056D000B842D69CE8F02E46789B4B545E2F395842
+:1056E000931D1D9E07EBD5DC20E0A507AC31EA8DAC
+:1056F000C17A1B6E10F8F5F3D56445EF773CD6639D
+:105700002EF56FAD56467FDF64E3FFDB5DA72E16F7
+:1057100079236693181BD7D54E9F321660384E9565
+:10572000F90A890FEECCAFBFC967EC268409ED03F7
+:105730009358C808FD079258707D96547F26D56F00
+:10574000EDFBF537A952FD80214A7D136B50B0FC6B
+:10575000E72847C0F7FBFCB9946E14F273DF5003DF
+:1057600063D82EDD1C1C04EDEEF17B485EEEF68F57
+:10577000A5F2BB841CFEBB90B3A090B30751CE2012
+:10578000DD8A7266C6FE7CADA500A77D6F3CDBECB2
+:1057900026F95A4C78AA8CE06FD83B64FB66807F70
+:1057A000DF0DAB4E6F03FAB7350FF318A1DE3D43A3
+:1057B00035F9625E96DC55EF9ED9279C8B8612BD2B
+:1057C000CB10CEDD1EC13F15061651EFEE19E17A62
+:1057D0001558EF2E4F185E28B2DFBBA684EBAD2222
+:1057E0003E2BACA4C1DE9D2F3B9842F3110485E80B
+:1057F0006B42FAC2BC7C76C0754A2BB44F49CE4B83
+:1058000063D0EE7E9C8F669C776EA28BD61EE9ECF1
+:1058100083EF1916568DF081B2FB8D80AF69B63BD0
+:1058200011E972FBB5454C19C6585F519E1A2852B2
+:10583000B200AE7D4E9182DF4DB3A11CBEBB447958
+:10584000F21A5E7E3B963BBACA13B11CBE27554383
+:1058500039E4ED7379F91D7EE0C4E0AE7A9B80CF28
+:105860003EE2773AFF0E6C45FA9846F354C3FB09C3
+:105870001412A0DF414CC774E1BF69D0BD190BED14
+:105880005DF8DA06D7535EC36FD3E038CA6BF8D839
+:105890002EEC97B110D2BE4BFA326FAE980FAC3BE4
+:1058A0009D13BDD95279A6EA4950814E992F1959B5
+:1058B00000589009E289F0F4ED8A9881F0EC71FECD
+:1058C00025F76EFE9986CA74D0D2A3821E1A1D36A1
+:1058D000F697E9601920D361E300990E960BCE4F3D
+:1058E000871DCC4D748E450FADDFCD43E47EE32E96
+:1058F00092FBDD7C91DC6FDCC5FF9C7E6BB2E47EAD
+:10590000ADD972BF35D972BFD69C7FAC5FA67A6025
+:1059100032A0BED2FE2E94F4DBD5CC7716DBA39E4C
+:10592000C3F9A4E93953B28FF9EC5DFC84758AB1EF
+:10593000FC48388325BD0A703EC57A00C77B7E3897
+:105940002E1D9C417A385F0B7C58A49EEE06870D75
+:10595000D48FC3A4F076214344FF4CF5B1224764B1
+:105960003B8FAEFF1C7DFF4E458CC370DEFEDD3AE3
+:10597000BA66EBF14913F830C3F9E8C15C3A38591B
+:105980007A386E814F48392F1CB77E1C178AFE0368
+:105990008AB47E013D8675B56B07FC689DCAB30469
+:1059A00077827E08EDFBF214AE03E71AAF755BA0B9
+:1059B000FEFE9196D0E5507E2E5810B440F9E427B3
+:1059C0008F3AD18EA978D2A862B9619F8DD697B649
+:1059D0001D0A9557595AEE9C00E51D4F1AD976EAD3
+:1059E0002ED380E33B25740A0BF17CA98D672BB67F
+:1059F000EDBF11DB973559980DE0553CBD6CE604C1
+:105A0000C82F3B646258A562E75A735FC82F0F2AFC
+:105A10000D98077C699D0AE4D9823BA1FEBA7D5F9F
+:105A2000B621FEE71A4D83109F33B04EB8619D78C2
+:105A3000C9D1923A1BE8531EDC3D0DDB97EF523C77
+:105A4000A0E100FF9D073310FF47148F0558B8A24F
+:105A50003E9EB923E6CBA946238D77D53625C800CF
+:105A6000DE32563B0DE95981C4413C3C96A04DE9DC
+:105A70009A6F67FC75D49F96AF7804FA83F6958F7A
+:105A80002B1E1C72A581F9701EB73D6D2B79C88E37
+:105A9000E35D6B1EECC0716E3463BD65C1854FD98B
+:105AA000DC88E736F334C477EB3673E950A4235B24
+:105AB000503414F1FBBF327E75462F8E77D548CB1C
+:105AC0007623E0C1ECA181B31CDDF5EC1958AFDC05
+:105AD00011EB673903BD4FEB77D05C3CACEBFB9728
+:105AE0008644D21F2BEA8DCC6DEDEA47938FC0110F
+:105AF000211F7B1D446F8D9FAB5C7C0A68FC5C950D
+:105B000028F8AB76E4CF1AD61D9F3B912F644FBB8C
+:105B100028FD05AC9B986E81751EE9772FD84F6ED6
+:105B2000B2CB3DF4FD01B09330DD0A7612A60F82B0
+:105B30009DE4167612D6DB0E7612A63BC04EC2EF5F
+:105B40000F833D8E693DD8E3F8FD51B0C731DDE5E7
+:105B50000FD0F7C7FD359436F86B29DD837C83B40D
+:105B6000D11FA47A4FF9EB296DF237D0F767FC4DBE
+:105B700094DE2EE8E89CC80A701D757A990BC99EC0
+:105B800034C35B60827C5211CFA7DE102830433EC5
+:105B9000D50779A04BDF95A1020BE4FB56F3F20188
+:105BA000B7B04956C80F08F0F2ECDBBD936C90CF4C
+:105BB000AEE5E583B70626C5417E7090975FB42BAE
+:105BC00034291EF21735F0F2E1CD6CB21DF2C34359
+:105BD0003C9FF79277B203F2792D3C9FFFE7C064B8
+:105BE00027E4F35B79FBF16783467794F5778FC9F8
+:105BF000BD1855CE01E56DAF9A0179B3FB265489E6
+:105C0000479553946F3479A9FC7DA5DDABC23ADF8B
+:105C100068F652F917CAE7947FCAE4A3F278835270
+:105C20004079B38FCAFB1BE228DF640A50F90843AE
+:105C30001F9E3707A8BCC0D0AF00E13F630A52F9EE
+:105C40003586413C6F0E52F92FD4E10553A0FEE397
+:105C500006DF5ED477EB155F19DA874C6D48477D18
+:105C6000A5D9953B717068676698691EECF943FE8B
+:105C700043340FF02F19F3A50FA35D0A700E121C09
+:105C800013C031F60C27EFE5B1129CBC97CB34382A
+:105C9000AF101C5BEFE0EC7979BC8CCFCBE51A9CA4
+:105CA0006304C7D1BB71E5BD3251C6E795951A9C17
+:105CB000E30427B177F8341E95E9D378344C9F3349
+:105CC000B83EAC4FE91D3EA35F93E933FAB5307D92
+:105CD0003E267C327A07A7F135993E8DAF85E9F3F0
+:105CE00015C1E9DFBB718D7E5DA6CFE8D7C3F43166
+:105CF00019104E56EFE03CF5B64C9FA7DE0ED3C709
+:105D00006940FA0CEADDB8F2DF91E993FF4E983E64
+:105D10006984CF90DEC179EA1D993E4FBD13A68FED
+:105D20009BF019D6BB71E5FF45A64FFE5FC2F41983
+:105D3000427046F60E9FA6F764FA34BD17A64F1EB2
+:105D4000C119D33B7CC69E92E933F654983E1308A2
+:105D5000CEB8DEC1693A25D3A7E954983E5388CE20
+:105D600097F66E5C63DF97E933F6FD307DAE22383F
+:105D700005BE7AC287011C476C38CF9C93E9F3CCEF
+:105D8000B9307DE6109CA90027A76738E3DB64FAE9
+:105D90008C6F0BD36701C1B9B277709E6993E9F339
+:105DA0004C5B983E6544E7AB7A37AEF1ED327DC689
+:105DB000B773FA54593C931D68DF2532CF76687269
+:105DC000C9C986034EC89BECCC83605F52423B102E
+:105DD0003EAC956417AA1ECD4EF130B4436738DD52
+:105DE0001EF4FB18357B84B5D07EC1BE2B51F20763
+:105DF0007D6998740BE2EB00AB2DD22E49181B275E
+:105E0000D94389DE2429DFA7B0AF543FA5285B2AF8
+:105E10004F2BB9482ACFF0E549F9CCB2F152FDFE3B
+:105E2000D593A4FC056BA64BF5B302B3A47C4ECD71
+:105E30007552FD41B58BA4F20BEBCAA5F221C155F9
+:105E400052FEE2FAFF23D51FD6B04E2A1FD1B45915
+:105E50002A1F19FA85941F75E801A9FE9896ED523C
+:105E6000F925C71E95CAC7B5EE91F2134E3FA3B3ED
+:105E700003E5FDFFFA02C6EDC10C33D983218799F2
+:105E8000F2E67D36B2FFF7631EF869EE3B83F2E679
+:105E90006717BB93713F8D0060BD2FE85B7621FAD9
+:105EA0007B6E1EEFBBD005DF6F36FB46B8A2F82332
+:105EB0003CAA6F9F81FC452D0A4BC7D46DC034CEE0
+:105EC00028F6EB162E5F1BB3F21F0A44C8694D7FFC
+:105ED000987F903F6C3093FDAAC9F7C6FEA5E90BE9
+:105EE00023FAD9D0DF5CB27D28FFBED88EFD15BD68
+:105EF00088F3ACCADC3118F1D2F763C91E2BF56305
+:105F00001D5046FDBC86FD44F8BD2C03CA74FD58E7
+:105F10004BB68BEFA29F6338AE58FD6CCC1E2F8F13
+:105F2000674039F5F3AEAE9F8D03CA75FDC4F1F13C
+:105F3000C077D1CF7BE71D4FCE44793C17ACA47E10
+:105F40003A7474B35CB052D78F9DFAC1EF8BC99F7E
+:105F50000BBB8034E0B3A5A394E4E03F6D2C00724A
+:105F600061CE2CFF35E6D95B363608FB7143BF5056
+:105F70008FE572FFD1D386241ACF6771C0FF083B2B
+:105F8000B56B3F1BA07DF15281220B0246B0BFAD25
+:105F900014B2B96457F1809BDC90361D187837F63F
+:105FA000B3C5E11904F9B6A6C9E6C551E46969ADFE
+:105FB000E9546BA45F44DBDF4C62B9D5D0FF2E9B64
+:105FC0004BCA6BE94AC5C5843F82F22760DFC260D5
+:105FD0003FF067D8173020D5BB26BE4F7B07F6377A
+:105FE000986F85FD0D9633B696DA9D107EDA13B75D
+:105FF0002B41A4F7673FF9A189F47880BD9A9E8A66
+:106000007E37FEB7604D3CFAF8C3F82D0CF491F2E0
+:10601000A02E330DE9B42FA4FD6FC7D396E076A46C
+:106020006B4D26D054D4CB66EC75D8E4662451363B
+:10603000D33096B1D9D5C553D3681629FD57019EE3
+:10604000B31A479AA0056B33B5DEE8B177C1655E38
+:10605000D309A48F15FE219C6B0A211FD1FFB545E2
+:10606000727E2E53BBF2C0EFC1C66CC137D1AFDB1D
+:106070006B42BE16A5727CE6629A87C5DCDF51E2F0
+:10608000E26D357CAA169B5888F6A7811486FEE837
+:106090004032D5BB4EDB67EAF02B3159BD4540D7C6
+:1060A000928546A2AB1EDF37F7C57B0DC321ADB984
+:1060B000DB84AECD9EF09FE793CB5919EF4FA3AB96
+:1060C000262FA7047F4F20FF217D1FF90F789F14F3
+:1060D000FCEF9263CEFF2A8B6F26F2BFE37E232371
+:1060E0007E09BECF117C5F5A2BF37D0EFAC9A1FE4B
+:1060F0009CD559C1F558BFAE8FC45F18B84C87DA2C
+:10610000BBA6825AED86FFDB420EAEABD9FD3CB298
+:10611000F7FA32DDF8041F6E147C98AFA3C71CC1D8
+:10612000B7F9826FCB58E0B60CF21F054DE8179B0C
+:1061300057A630D417553FD5F8D62AF1CDA7F14D43
+:1061400087EF8D826F37FE84F34D8F77ABE05B6B0B
+:10615000DDC72696DD1D6F3D9E0BD6E8C615D0F334
+:10616000AD569C3BB8CC68EF147B0BFA9C8CA87F97
+:106170004DE1957D4E46E8856B8B8AA5FCDC9279D6
+:1061800052FD79BE8552F9F565CBA5F2F9D53F945C
+:10619000F20BD6FC44AABF30B0562A5F5CB3492A42
+:1061A0005F5A7B97945F5677BF547F79709B54BE3C
+:1061B000A2FE11A9BCA261B794AF6A7A5AAA6FD89D
+:1061C00037E46A94AF978E1A19FACB3EF5BC4FFEAE
+:1061D000BA4F3D260FD6A944991B87F2EC26793E8B
+:1061E000E5CFA5F4B4DF43F27EC63F96D2B6A60350
+:1061F00076F43F56C581DE4F043BDCF8E6DA9A7E42
+:10620000B8DE40FBF18C351B5BD706207F000FA367
+:1062100060DECCA833B3D02806D2DD372CCF1DC624
+:1062200088F2D61ECAEB5416EAD3BD7C466BF4EF57
+:10623000ED4AC7E00CF413BE61613B23FC75DDCF72
+:106240002B5826DA15B1CACF1A5859E479D6492302
+:106250003F27711A279D3442BAD2CCE7FFCA3D19B5
+:10626000939813F3A1C1D551FC2EE1FE1A00993485
+:10627000E4738E34EF97D55DDC35CF19F6934D720C
+:10628000BB3C384AFABEA27E82D42E57F1BD6B8445
+:106290007A67F71B69BD66A10303AE1986F8794FCB
+:1062A000E277D6944276578BDFDBE7E440C6FEE820
+:1062B0002FA4F4557F11A5AFF94B283DE6F751FA0D
+:1062C000A6BF8CD23FFBAB297DC7BF86D2567F804D
+:1062D000D213FE1A4A4FFA6B293DE5AFA3F4B43F3F
+:1062E00048E9197F3DA567FD0D94B6F99B28D5F4C3
+:1062F000674FF2775AACAF6750FEA2C899F956B60D
+:10630000AE6662979CC5A9967528671A7D67D459B1
+:10631000843CA44AF29088EB30C9590FE5752621D8
+:1063200087B1DA472F4779EBFB3DC81B63EB480E7B
+:10633000660AB9FBAEF2C6D01B9F82F294A99327DE
+:10634000590E3539D2F440AE52345C1DD325573343
+:106350008DDC4ED2E4EAE7682746B1B76E5015B13E
+:10636000FE71FB88F9320C68BFAD127E7FE64EA746
+:106370007CA7E87B3D806BC17A6A3017D791CEDC71
+:10638000BF0D46FF78E7310B433F7CACF1E9E525D3
+:1063900036DDBDB47F280DC2A236AA7BB92D8ED3BF
+:1063A000D56660852C0FCF67F38FF9809F71FF79D9
+:1063B000711EEE6BE1BBCAC8AE0A7A8AA3F8DB197C
+:1063C000CA785ACFF4D5EA9F7AE0CB7C3C379F2934
+:1063D000E679DC01233FD70E3DE4B926E27C06F6E0
+:1063E000DBE9E877EE18647691FD10EA2BD331D81B
+:1063F00057A2E381419F0DC6F38D4D208738BF3AE8
+:10640000070E4E60E7918F9EF47C4FF45C14ECDB3A
+:106410004B7A9A199E1B013DB7E3FD97DED2B32755
+:106420003DD9937E3CB199D3D929ECD358746E9F52
+:1064300004F32E8A1CDFA3AAB21CB381FCBC43A3C5
+:106440003FEE4B23E87FA9DD4DF59FDBF7D6805665
+:10645000E8A7B3F1C204C6CF73C8AEEB7852D8ED4B
+:10646000EE4C998FAD7D09AE06E7B9275F1F80FB23
+:10647000E4DB3003F3ECC9F8A25FA9295DF07A7B75
+:106480000E1F6B5CBBBFE5FC6C4FD5E667CB009481
+:10649000A7CF841E8839BE9EE414C70770AE52F899
+:1064A000F836188B7E877A263CBED129BD1A5F55F7
+:1064B00082992923003F87D9CC1218DBA1FA0EAAB2
+:1064C000B48FF3B406D04FB12FDEB31E5852E53C63
+:1064D000F372C88DED647FC68A7A9B4BB69F125DBE
+:1064E000B2FD94E18AB49F3A0F3DE4F4017EABD251
+:1064F0000DAE93A3709DF38A758EAFAB1A7E150D0A
+:10650000592EBB0447CE77D62A850D244FEE84D969
+:1065100051CECBB47455BAD97512D6AB33F539090F
+:10652000D8EF19BFD5C5D757978BF79BEE8A5C5F1D
+:1065300057AE89A3FA1A7EB1E0FEB3F163AC91BD08
+:106540006BC57511CA7262D78FC94FF513339D4B56
+:10655000379B3E43FBDD96ABD9EF2AE535B8550DA9
+:10656000C68065047EDF25F507EDDCDA1933B68BCE
+:106570002D372A3BA5F113F86FC58377DAB75A890F
+:10658000CF3E809800F0DA557B0DCAD50995CFE74C
+:106590002A21A715D656B3CF4DE46E41795E3496C5
+:1065A000691366EE5BA0A73F78D144F7B4D85700D3
+:1065B0003DBFEBAAC01256E444A7E7A2C61533704C
+:1065C000DDFEC0A0ED876BF371DCE798A110F5D27A
+:1065D00039F647E7A888F93AC4C4FD31AC86EF73B1
+:1065E00002F00FC7B7B456DEF72CAB93F3A56C5689
+:1065F0002AEADBD22D261604DC97E3BE491B37E8D6
+:10660000DF0C13F76B2C63D51B709F7EAF89FB7B70
+:1066100016B9989A097855FCC72FF3D1EFE3317179
+:10662000BB433B4F5E9EC4F12E9F1D347BA1FEBB3E
+:106630008DA3E680C685F6C10D64FF1433CF4ED618
+:106640009DEE8B6B64FC7AC25F8FAF6607753BD79C
+:10665000167824D72BDE60143D77994911FB3F3E15
+:106660003F669B647FCE3C93ECF7D1E4C024E4E02A
+:1066700084EABBDA3486F31DF9A8A81D665F443DA1
+:106680007357BDD9E7AB67C17A46AA37CF9482F575
+:106690003AA6D1FE98813C0DEDAA67EB827723875D
+:1066A00027D7ABF88FC79E0A80BC94FFF61E2783BE
+:1066B00075F303B536D503DF57EEBCCDE985F4B4E9
+:1066C0001A70223F3F081A0BA3D1634B981E5EBB82
+:1066D00082FE34219FAC26407E8ACF769A5CE4E726
+:1066E000AFB7842C20A7958DCB67B0E1943FCEF354
+:1066F0001B3F3262BE49E657F9AFEF4975F37B366F
+:10670000DC9FC44264E756EE786F1AAE1755AC832F
+:10671000E44CDF0EFBFF3C89E6F5427342F772C0A2
+:1067200093FC095562965535FEFC23A313F3B27C06
+:1067300094097B15E984FBFCDB4C8EE453F190BD9E
+:10674000845D82F35CA3070B72BB75FD23F70D3FDD
+:106750000EF89CDDF1A253191AA91FB89C75362CAE
+:10676000FE95D5105B8FB4811C46DA470098DAB9E4
+:106770009B84BDDDCCD395A69013EFB3ACDC66F261
+:106780008004B2958F1919DE03606F5882E8175D97
+:10679000F1D8F3AF8D07BAAFD86D4A9EC187635762
+:1067A00052BBF85205FF5B93D7C587F2279E37BBD4
+:1067B00087F1EFB72475F163C5EEFD6636AC3BFD9E
+:1067C0002637EC37B7DAA3F0A5E1F8345C67D73F9A
+:1067D000F25733FA133FD8A7B0B4ACEEEDCBB63DC9
+:1067E0004FEB1DD289F828F814E65B377E85663EAC
+:1067F000339AEAB9500FC6E2D732A177419E1F7F84
+:1068000006EFFFBC69F1E0F8CB1EBFC989E3785FF2
+:10681000ADE672FDCBDB52717E979902A92E4AF943
+:10682000F7B2077F44F2B6ECC88F52C95E60DE0C47
+:1068300003E9E240068E6FE9D66B697CA5CC47720E
+:1068400057F64B6311DE47FC546585BBA3CC8B38F0
+:10685000B342F8BCBF1D0C1918DFFBB8BF447DF66E
+:106860004723DD8B62EC87746FEC4762ACB0F2516A
+:10687000FE532BE7D371A12771224BF2BA63630B4E
+:10688000F2E74C7F6F1A9E73001D02825ECA3700CA
+:10689000D778646A1AE70F73ABF9A21DE8F7C9F855
+:1068A0001DEBB798BCB6E1523BA10F79FFAB45FF9A
+:1068B00080771CAE57EFA746B7F7C688F1C15F0BCC
+:1068C0008B90AF88F9CDE7FB8E4D7C7E6BF33D5806
+:1068D0005C88E59FBCCAE70FB6C3F501F00AA55175
+:1068E000F9FED90AE903D857479BD73B4C625ECBE8
+:1068F000E56029D27A0F78AB4A42A49C00FC24A21E
+:106900003FED834BB740BB08FBAB0AFBA37AE6AE77
+:10691000EF11EBC332A1074C6698FF1777CD7FB616
+:1069200095CFFB9EECC995A6E0C30FE07C7DC3E24A
+:1069300009B871BE9A8A70DC1FEE3AF0DA7520D77A
+:106940001F3668F354D69FFA795AB6670C8B364FC8
+:106950003FB4C3FE2ADA3C85EF51E7A9BD95E4F8C0
+:10696000FBD69F1ADD869A65BD897AF019776CFA95
+:10697000E9F5E0EF4D6EA2A35E0FC2DFAB2CBFBB0B
+:10698000DC69F2A6C959F96F2A2E407D1396474D4E
+:10699000DEC2F2A8C99B7E9C32DDF4E57F15FAE6E3
+:1069A0007A6BE13568175B3B18ED570A661B83B8B5
+:1069B0004FB67EC268BE4FBA219EF2738DAD4FA016
+:1069C000CDF756C5DC61B88E5FCF02267E6E5E6B5A
+:1069D000223BF5AB6FBE9908E3B94ED0F57A20F3B0
+:1069E00055C087125509C5019EF354164848427F89
+:1069F000B1C24E44E0717D999CC7BFCB52BBE0F45D
+:106A000054FFDBDAD5DF353DE2E767577FC294F606
+:106A100017603847C85171333FA7A81AAD04B3694E
+:106A2000FEB5AA4511FB84C7CCDCCE3832E59A31DD
+:106A300048BF82B9C31248BE6B87D03EB04AE8ADAA
+:106A4000CE803B01F57967730EEDFB3A0F2D76F89A
+:106A5000A2E8AF0342CE9E17E72CED76A5D608F24A
+:106A6000DECE3AC86E09D86D51FD6E756683B0777B
+:106A700004DFE0CF08FD9708399C074D13F222F898
+:106A800036FBAA0F5467773EE0DF89887DC33F4A13
+:106A90005F946BA4EF015BEBB4A228FE994785BE1F
+:106AA000BEECD92FCCB8CE4D692E50918E53EC460A
+:106AB000C9DFB15D9BAF43D950C4EBB26797DF31FB
+:106AC00006E4B8EA90D16383F155357F64F645D981
+:106AD000BFE9E989F0D17E6C3573FBF8A8A9682974
+:106AE000D2F5E8B5FC3CF74F664F45343C675B395F
+:106AF0009EF358D1A7A3957F3DFA16CC7584260145
+:106B00003D3AEDFC7E7277F9E3F3BED3A504D72AB4
+:106B10002887469E4FE6F77FA731DF1D13159AEFB2
+:106B20009747EAAF82A6E2C7F03E4B65B3E2324038
+:106B300079A5DA6A4639AE6ADAADA25DFE03377F1F
+:106B400067C1D4EA61B323FC5BAD66EE4F3AF0B7A0
+:106B5000EBE6237D3F9E6D61889777E8474E5CEFBB
+:106B60003F6E1E45F320D6B8FEE0F75C3305FDF11D
+:106B700066AECFF4F2302D395ECA5F3B99F5C37330
+:106B8000DECB2CAD3779A2F06F9D85CFD35EEB378E
+:106B9000EBFF30FD3611F41B976B53A47E9B6EE127
+:106BA000721FA1DFD2A2E9B7556BDD692817ABF6DA
+:106BB000E6A4215F571D5E9A124DBFBD20F6B58732
+:106BC000C53DE9F67EA0DF4644E8B77EA0DFA2F827
+:106BD000C1475B34BBB307FD66FDEF997F2FA07EF5
+:106BE0008B32DE2B84DC69FAADB0792DE9B7C27E39
+:106BF00046E93ED2651661C7C5D46F0BEFB996F270
+:106C0000264F7C14F941BAA27E3B2CF41CF6837A01
+:106C1000EE67966FA7E7E65939BE3DEAB9FF263A17
+:106C20006B7A6E557F85EC97EE72C8F5DCAA2CAEB8
+:106C3000E756EDE57A6ED520AEE7F4FA6D5237FDF2
+:106C4000C6DB57E6427BDA2766DD7703DEE72B31CA
+:106C500079AC507F865B7B5F503D2652DFFDCC12C6
+:106C600043DF7940DFD97BD677AFA0BE53498F0D84
+:106C7000C479A4978FE903E3A5FB6A47BF38F59B66
+:106C8000DFE27CF98391EE03BD6EE0FBA17D5F9CAA
+:106C90001A85F3EE65C407E6CB4E217F6DFEB1A4E5
+:106CA0004F270FE5F3BDE2501CAD13958D0A1FEF82
+:106CB0002D4AD08DEBC0DF3EA77DF2FCBD7C9F3C12
+:106CC000D7C2E9C17E6CE4EF2280040B23E4A1E487
+:106CD000F372F2F395A8CC8AF6EB8243D33F40BB24
+:106CE00075C1E73564EF2EC0EF78BF6277EB864C55
+:106CF000E877FE7285F61B4CDC87D0EE4B5CDFBC80
+:106D00009FEEAFE8EF4168FA7C7EB5FC7D81CEAEA8
+:106D10003F20C609F62CD185BD628CEA9F3BA0A717
+:106D200087878FBF6235B78FC3F400FAB895EEF44A
+:106D3000008ECE5898DA35FEF94FC2B892BBC6A580
+:106D4000D1433F3E6D7FB240CC8D58E3D5E8D76D3F
+:106D5000BC1A3D75E37EDE22ECA28BD9309C67AF76
+:106D60001B7C778C41B9F83D8C1FF099336F505ADA
+:106D7000A41E7E51E8F3AB7CC7A7A4BA915EFCFDCC
+:106D8000DD7565BB9F4F85715CEDCDCAC3AB08D780
+:106D9000FECDEC433FC2015B07E9354DAE2EB47228
+:106DA00039FFBB8073B4AF6B0AAD1F4D8A8BE64BC6
+:106DB00048A7B7C4BDB02AA027CEC7AA26B1DE8097
+:106DC000BCE17C9BA6AD3F487FF8CFAB9A39FDABC9
+:106DD000AA15A2FF4CD67110E95B99AC7842006A03
+:106DE0005AD3EEDBF01ED50B36F88EF3B64CF16CB1
+:106DF000E7E4B067A446954B359A5CB2EA21E457C4
+:106E0000D0D6C105582F09DF8BBC9E82F689DEDE05
+:106E1000B8CCD27214F1B8ECC726B68D75B73F3432
+:106E20007EE7C2BF6FA2DDE7E9417E0709FBF205FD
+:106E3000A4B71DE9DA6146B9AF0AF175432BAF5229
+:106E4000DD53883E1ABD9B605D18CDE98DEFBEF421
+:106E5000F4BC5ACBA33C63FD66C584EDAF043EF49D
+:106E600081A2C9862F0E6AF28BEFC4F474C1FD7F34
+:106E700046C47C47BD1479EE58D97484E8327D3518
+:106E800098551174477D753EFA749B0F4DFBA3DE38
+:106E900083FAB6F3E142AB3C1FF6D93A5E1C81FEA1
+:106EA000ADBD0AE903D69C28EDEFAFB0F27DD3016A
+:106EB0009B8FE4B6E3B089EE7BEBF5C658417FDCEF
+:106EC0004F44BE839B8C03C1F35D978DBDABE191B5
+:106ED000CDE527525FBF60F3119F62C19F26E0C7D7
+:106EE000B297C2F8627F789EE296FBD3AF179A9F63
+:106EF000A7A7715D23D6FBEF3AAEF0F9246B3133CF
+:106F0000EECFDF6D8E38679A23FCFC9A1F2CA2DE31
+:106F10004CCB98D8F5D0DF128271BFB0EB21F2EBE9
+:106F20009E7BF4F84C94DB15BF33322BF0B96D9790
+:106F30008385F83D0A33AEABE58DC6A8E7228CAD5C
+:106F400027FC56FCD6417AA57C8F253803DA973F7B
+:106F5000F5EE70F44FB5ADE3FA25F0A8908F40EB55
+:106F6000703C2F2F57F979B11EDE8F85BC9C7D3A7E
+:106F7000BE04F5A352CFDF759637CC355922F6E51E
+:106F80009578E0C6EBD13DE4C0230AF9C1BBE3B775
+:106F900096D77B84EBBDF2265310DF8796D76FA37D
+:106FA000FD6C55FD4766B4E326FFF631B223AA9A7D
+:106FB0008CB29FB0DE18B2901FD3781C53BDBFAE09
+:106FC000B2B182E6636583F087E9FC452B7EBBF7AF
+:106FD000A9009066C513BF76A29E39D3B2D3497E6D
+:106FE000B87AEE6753ED6A743F5C4FFEB7864D5139
+:106FF000FD6F67F03F60FE6DB5CAFE3756DFA757DD
+:10700000E7E02B1EFBF4413C173ABBE7C30711EF47
+:10701000955F7FFCE04FD13ED96773E17A57F5E881
+:1070200051F2AB6BED9E12F3AAED915F3FFC00CCE9
+:10703000BFB6372C74FFAA6DEFFB03DC30CEB6DD94
+:107040005FA4A2FF72F5DEA9B46F59FDE4E4B4F3C6
+:10705000DD2341B90CF6E23C44CF87038D4686EF31
+:1070600020CF1DB3909D11F6A3365470BFB45BF8CA
+:107070004F77453F77D2FC7E958DD75C7D29AE7BDF
+:107080008D268F9BBE0B3F604F7ED357819F237A07
+:10709000C1B75DC22FAEE3DB39FC0FE0CF9FACB2CE
+:1070A000BFF9D3C6A5BF7A00CB1AFBC4F49B867A7E
+:1070B000412FED5C6B9BD5FB8E15E7C39EDF907F68
+:1070C0001AF90536376B7BECD301E86F386DEAB8F7
+:1070D00091EE5FECB5D03DA1F2BDAFD3FC687BF281
+:1070E000089D173171AED4C6C27FFC1C40EC65AA66
+:1070F0007638B8BF55D01DFDB16E277D177E572E4F
+:10710000B79A3F36961FB68F4DDC0317E76C153BD9
+:10711000DE32339D5F5B198B7C3A2E9D0B6AE3D682
+:10712000C373211D2E893C4F88E5E7167A34CC279E
+:107130007E8ED0B64D9C2F84CF0D18EB9787F7DF4E
+:10714000F979775550799D45998FDA7982D3A69B45
+:107150008FC1DE9D23F48CEF77A38762E3FB568D0E
+:107160002E67BF8AAE8F87D814F1FEC0976B8B58FD
+:10717000771688F5A412E8C5DF93717CCF8AFDDD10
+:10718000D9478D41DC076F6838407A553FAF2B599E
+:10719000F4F821E36D5C9F5436ED1F8EFAE7ECB3F3
+:1071A0004F93DC55EE3A6E0E009C83F54F985B874B
+:1071B00076C939EAEB6084BE3EFBF8FEE1FC9C83B5
+:1071C000EF23F5F0AF10F0AB9A65F855BB3E92E0B7
+:1071D000AF0834985DF69EFB39A37AE7E278CFB426
+:1071E00098282ECA99066361B47825433190544A91
+:1071F000179D3638F8FB38639299ECC8D58EB1C725
+:1072000012923135BB711FBD7E2DBF0FB9FE679E37
+:1072100074E4CBFAC439740E54ABA3A32BD95580B4
+:10722000FB6BD794A2D128567A3D90E8354878AFC9
+:107230007614A6E17BEE5B853DC2540FBDDF333A89
+:10724000A715E2388C2E83CB16751DE5F04CF6227F
+:107250008A176172C9EFE9BEF7F80FEE7E72FC87FC
+:1072600040BF7F34FE03A33818FFEFE33F04B09F15
+:107270007F81F80F21F2DB68F11F92BFE7F80F6BF7
+:10728000991CFF41F0331CFF41F0F37FE33FFCFF0B
+:1072900015FFC118F7F729189F418BFF9012679EC1
+:1072A0001A19FFE1C2B884A991F11FC6C5A54F8D77
+:1072B0008CFFF083B8ACA991F11FE6C75D3435327D
+:1072C000FE4355DCA8A991F11FD6C64DA4BC16FFFC
+:1072D000E1EEB8A953E5F80F33A74E817C5B9CEF34
+:1072E000EFB85EC58AFFF01E4E96313DC77F00386D
+:1072F000E6B831B1E33FE8E1C48AFF007012084EFE
+:107300008CF80FDDF08911FF01E0A4139C18F11F28
+:10731000BAE11323FE03C0C9223831E23FE8E1C4D9
+:107320008AFF00702E8A4B891DFF410F2756FC07EC
+:1073300080338AF08911FFA11B3E31E23F009C8916
+:10734000042746FC876EF8C488FF0070A6D2B86296
+:10735000C47FD0C38915FF01E0CC247C62C47FD0F8
+:10736000C38915FF01E0CC257C62C47FE8864F8C81
+:10737000F80F00C747F8C488FFD00D9F18F11F0011
+:10738000CE72821323FE831E4EACF80F006715C128
+:107390008911FF410F2756FC0780F353821323FE08
+:1073A00043377C62C47F0038B7129C18F11FBAE1E2
+:1073B0001323FE03C0B983E0C488FFA087132BFE0C
+:1073C00003C0B997E0C488FFA087132BFE03C0F960
+:1073D00015C18911FFA11B3E31E23F009C7A92C387
+:1073E00018F11FBAE1F35DE33FD84203951C8AFF11
+:1073F000407122C3F11F92BF75FC8766C4F77FE31B
+:107400003FFCCF8CFF70B3DDF7751CF941BF5BFC0F
+:10741000075BFCB78BFF70B3BD283E1EF797DF32CA
+:10742000FE436AFCB78BFF00FDA4C78F89DD4FAC1C
+:10743000F80F39BA7E7A8AFF00FD0C3AEF7862C401
+:107440007FF0E8E8F67DC57FF822EEFCF11FFEE54F
+:10745000E22CC03605CF7F8A4914D9BF4CDC856B3E
+:10746000E3FFC97117C858F8578ABBA0BDDF6F305A
+:10747000E17AF5A6E0FB6B422EDE12F1178EC58C89
+:10748000BF10BC8AFCA2CBE5F80BD3051FE7F9645B
+:107490007998CEF879C3F429593C5E66992EFE425C
+:1074A000AE7C7E3DC377640A80635779E4711C111A
+:1074B000F230B3E4A3E7903D578F8D1E7F6196E0D5
+:1074C00047B18E2ED305DF8A457A3D3E4901799E2C
+:1074D00051764445BACE74B7AAE4D7FE81C63FB709
+:1074E000C4BFD902AE1EDF59827FB3AEE4FCD3E342
+:1074F000FD2AF2CF0969D928E29F1E6F3D9E7AFED0
+:10750000B3487E47C4CD286072DC85C95639EEC2C7
+:1075100054971C77E18A7439EEC2956E39EEC20F2A
+:1075200072E5B80B5779E4B80B578F95E32E147BAF
+:10753000D7EAE23E6CD2C57DB84B17F7E17E5DDC41
+:10754000876DBAB80F8FE8E23EECD6C57D785A1742
+:10755000F761BF945F5C7358AABFB4F688945F5616
+:10756000F786547F79F0B854BEA2FE03A9BCA2E10D
+:1075700023295FD5F48554BFB7711F5E15EF815F76
+:1075800013EF818F89F7C06FC688FBF0D79F7F719B
+:107590005BE47BFC2F7FFECD6DF81EDF20DEC1C6D5
+:1075A0008AFB102E8F11F7A1ABFDB78FFB9092FCD9
+:1075B000CF7F879F63E7E79B13E227E5D853BEFBA6
+:1075C0003BFC6B8BE4F7CC734BE4F7CC3976AECF56
+:1075D000E7F9E477CDD797C9EF9ACB6CBE6CC4437B
+:1075E0001FF76142BC37C78EFA52BCCF0FE1FB5484
+:1075F000581B9FC5F7A9903E87711F203D88711FBA
+:10760000203D84711F20FD3DC67D80F4258CFB004C
+:10761000E9CB18F741C5B811011137A246C48DA8AE
+:10762000157123EA44DC88A0881B512FE246348878
+:10763000B8114D226E4488E09CF01FA2F4A4BF85CF
+:10764000D253FE63949EF6B7527AC67F9AD2B3FEA7
+:107650000E4ADBFC9F53DADBB8119A5CFE19ED068B
+:1076600033F6CFE55893D319F6811B22E5B4C87ED3
+:10767000D10694D358F122E6224D5362C78B089766
+:10768000C78817D1D53E76BC88B4D1DF5FBC887F70
+:107690008BE7F2FA8FC68B985F2DC73358B0E6FCA4
+:1076A000F122CA6C45AB512E3579FCB7787E5ED598
+:1076B00053BC886D7645ACD74017B4BB802EB45E02
+:1076C000F7F0DEFE39C7C3B9B89FE8CCBDE8BC719E
+:1076D0000EF472119BDE3CAEC175DF739C889EE890
+:1076E000AAD57FB39CC72FF8B7F8F3C72FE81627A2
+:1076F000A2A7F802833E233DD9DB38113DAD0B3DF7
+:10770000D173D6F71C27A227BDDA933EFDE3744E52
+:10771000E709F1E78FC7118E0B676D39488D5D5E04
+:107720009ADAAA78075E30DB45FE93F65DE2DE98D2
+:1077300097B95DA9FC9D3ADA9BED7B1286337ABF3F
+:10774000EE625EE04FBCF8AEECDABF1FCFD36F75D0
+:10775000326F6212C583771B73701F36D28AFE9414
+:107760008AC68F5EFE1DC0B5351BE93E593BE0D091
+:1077700042769F3711F916CF6EA77D3A9E717DD361
+:1077800027F23DB3EEF71BB04AC4F9CD54A39DF6E2
+:107790004D9D5BF93D4F23BBE8BE89C9749F9A0597
+:1077A000DDC43FB25357083C3B31C5FA3E2BD98F5D
+:1077B000CB0E3F911F62FCBC32D26FD0A750F6D3E4
+:1077C000D4D99CC3F15D250B785BD0FE5E22E0A589
+:1077D00014C9FE9B0F17151EC273FA25BE52BA8735
+:1077E000905622FB739878378EDBB1F07D39C0A7B5
+:1077F000B449610F28DDDF919735DFB501F739CB4B
+:10780000837AFB9BE5A29C95B3380FEE7B57D4CBD4
+:10781000E50E87B8CF6167F65ED1AD75F07D134791
+:107820009F976E9E10D6DFE5A0FBB0CB0E2F3623C0
+:10783000B32CE932DD6C6E996EF1B9327DF4F473DC
+:107840007864FAE8E9973056F67F69F4D3EE1BAA1C
+:107850004CDC170DF27BA4DDDEE1376D233CF5F443
+:10786000D3D36B9443DC93E8A257913595543EE112
+:1078700099A18648BEF5F321D31E52F0BFFB27071E
+:10788000D7522B8F4345BD95CE413365096F178F76
+:10789000F301E3CA320FCD07DCD1A37F379EFD5938
+:1078A000C8FDBBEC1B486F2A7EEEF82228DD8AF269
+:1078B0003682FFFE02F9ABB4DF4D601E17EEA31A4D
+:1078C000FC56F71215CF05997BC9403C0F74517ACD
+:1078D000A778F7DB3E94D1BEBF21F4492A9EA3DDF1
+:1078E00099D73113FD0F554B5911AE5F3F72F277A7
+:1078F000179B443AC2C9FD339B8B0CCC3B1A7F8744
+:10790000C71854D0EFEAF21EBE1CEDD166939BDE81
+:1079100011BB3A5EBE9ECA47D1FBE80C43ED48C49A
+:1079200007EAD3FBDAF6E6779D8B23F4705BD3DDB1
+:1079300043F07EF1FD86E8EF7A4B1DDAFB367EBF21
+:107940006344579C8152C7188A47706736F453596D
+:10795000DC497CD4E47282A0FF73A5D309BF279BC6
+:107960001537FAEBA6196FF8C130C06FDC5195EBF3
+:107970002F71AF7BB4A8FF34F3A423BEE32E650AB6
+:10798000CE9F716F304F00495C5D4AF7E97EE79CFE
+:107990007608F935A519E409F5C859BB07AFCA8FB0
+:1079A0006991EFCB254EF11DC0FB85971C63A4CFD9
+:1079B0002E39A6EAEFC71871BF3FAE55FE3E41B75C
+:1079C000FF5CA7C99D93A5A2DC6DF9CA4878B5777D
+:1079D00030CF3A80DBBEA42F9DDBB67FC2C84E6C91
+:1079E000FFCA5818ED7EC9DD0EEEF7BADFCC487F2E
+:1079F000DF5F6AA7770ECF96965F80F6C5673FF187
+:107A00005D10CD4F1961A725F0F7E7DE043616E5C6
+:107A1000F05685D3BB36A328CABAA5C99D26879A36
+:107A2000FC6594C6F9A2DDD74C7672FB685269AE4C
+:107A30006246F9D9A730A46BDB3AC0EB3CEB768009
+:107A4000ADCB447CAA9A3EA67B58D66625EAEFF2D7
+:107A50003CE170F2FB80EB026BF1FEC5CD3089504A
+:107A60004F65986BB3A2C10FB02D64973EE070F3E1
+:107A7000770356114748ADCDC0FB086D4D93AFDC81
+:107A800000783E00F301F97BBFC94378072A18A3A9
+:107A9000FBA4C25FD76F26DBB639C2FEDDEB283808
+:107AA0008C727BD8C1EDC63E3E8F82787BFEFE573E
+:107AB00027C26FFFDC42FCEB2BEC4DADDD4907A785
+:107AC0004F89D37B00DBB3B264523E1E9FD3BDA46B
+:107AD0000FFACD81DE51EC2B6D5D4FF2313A9F48AC
+:107AE000B21B82A49CBC5EB74BBAEF1DA079A3CD9C
+:107AF00003165218BED7D7F49BD2AC841C20F7A330
+:107B0000ADF610DE3F4B2A837127633C0F2B87D7DE
+:107B1000A29E95FD5A208FF968DC337AEF8F8E5440
+:107B200084AFE93D4D5FDE9AC8F5D1AD77A9140F5A
+:107B300074ABDA6A437F6A96D73D0943D324A96EB2
+:107B4000BA97D2BF8CCFC3F89C5F2686ED0098E42D
+:107B500023BF362E88F69E2903E52905E9E5FBD0EB
+:107B600001E9F0431DCFA2B9E0B1B13EFCFE94D0D3
+:107B700013C2AE9926D6BB71EF19F83BCAD0E52CDB
+:107B8000F27D915E4F80DCFF097FBFE7FEF7548AEC
+:107B9000131AD60FA5D3687D62C6A10750CE26BCA6
+:107BA000C8F87194D00F2EF887F4B9E425DF7A4431
+:107BB000E3BBEA053DBF59C81ACEE34FB38D3A0483
+:107BC000F32D729D758AF55EE8919B8A07AEC7F921
+:107BD000A5C9D105B7788CBE083AEADB87FD948A3F
+:107BE00035FCDD9D837AE42523DE0F6B2F007E03B9
+:107BF0005D9EC4F902F44EFC247825F27D4BF3150A
+:107C00003694EF5B43935C33A04DA2B5889897C838
+:107C1000BCE4CFC903EA609C88F52414B05F578B9D
+:107C2000B29C29788FAB50F2F768BF8B070325BE53
+:107C300084F900721C798F55934FBD3C6AF2BB1ECC
+:107C40003758787E871E73488D4A0331C8C2B6BA4A
+:107C500050CF6AF6E5FAB03D9748FB8CD5C22E5A54
+:107C60006F9F662535B03F99D6F3D5B83EC1F8571A
+:107C7000A7309A07DA38F4F258F5B9810523F607E8
+:107C8000556A07DDE3ABFADCCC827D70DCBE493897
+:107C90006E8D2E23055DF474C8768AFDA6A0476C10
+:107CA0003CF35D787F36D1EA651B09CF4974CFB9C3
+:107CB000219467C5F5F6361D9EBDC06F4E34FC5449
+:107CC0007B0CFC44FCB609CCF7BB5690D7FC9BEA76
+:107CD00032F87AC15E4D8FE09F7EDE8C6DAA3E60E9
+:107CE0008E982F9A5F573F4F4634B36B90EEE34226
+:107CF0002AC3F3D79EE6CB2762BC55F19C5EED7399
+:107D00003A06A37CEE507DD54EB22F5A0D18F7B728
+:107D1000FD6946F3D9B3FFA493E21BB5F4EE7EBA36
+:107D2000664769F693BE9E663F697A57BB1FBEDD04
+:107D3000E9F363FF4A13C8278C7FBD8BEF8BF63ABC
+:107D40007CEBF07B3C8C018F92586E288BBF7F952B
+:107D5000E53F96BCC7EBE4B901E844BF9305FA7F61
+:107D600090D21D0FADFF29CE447EDE02B319F5502F
+:107D7000BF7CC63BAB64747FB2DF70E6C3F5A95F1E
+:107D80001EBFF71714EBF636A16FB574AFA3E87EEC
+:107D9000C4DFA4B28025EFBBE38DA8E27DECED4EFD
+:107DA000EF7D287FD6422F8D23D3C53C687F66AAFE
+:107DB0000D0ABE9B4C5AE956F83D6CD6F58E09E08B
+:107DC00065CE7017A09C64E23E1AEB37478FA3F58F
+:107DD00084D324D9991E168E53F504F60B76E6410A
+:107DE00033E0DD678616F74A3BB7F12848A736C768
+:107DF0001C42BAED5385DBE3899C5EFAFD00121E3E
+:107E0000F15345FE3633536D49ACEB77380D56B21E
+:107E1000E3E399A701F5D2CBCE6C712EEAA9C1FCA0
+:107E2000BFAB1DD6C4A15D727CE7C4591E15AA382C
+:107E30002FED1C8E7B2690E7C3886FDBC4CEC1B7C5
+:107E400012313A0670B9F11AA5B8381AFD9B4C12D6
+:107E5000FD6DB8CF8ED4830E33ED23DB94380FCE77
+:107E6000B3B6E50AC753B18AB841AABCFF17FA48AE
+:107E7000D3AF9DCE2CC23F9E05681FC0AC1E2BDD2C
+:107E80006317F8635C45F2EBEC8D0F6EC7F3285D6A
+:107E90001C457D9CC5C98BED74EF62CB5E1BED4B21
+:107EA0003B8BF8F97C67B385F46FAC799A86CAE0AE
+:107EB0003CF102816E1D48B734537522EABDB4F916
+:107EC0007CFEEBE9D18E03C5FDCE1F4CC168EFD51A
+:107ED000B5343DBD6F31DA65E919E9946ADFEBEC41
+:107EE0006AD47BD8C604458AD337047A14FB1C6352
+:107EF000027C3FE7FBE36B5ED675AFBD2E8ED3AF42
+:107F0000D3373EE161942B1038FA3D01ED5C53EC20
+:107F1000E7B5F8495A3F5BFCD6620CF959B768BA25
+:107F20000DD78114E6BD721E4ECA2D26B693DAE532
+:107F30004AF75DEFF58F2CC6F7C99909FC1EED27AE
+:107F40005BA6D27BE654B6CE3618E8505A64F0A051
+:107F50003FE0DCA2379D06909F45992DF928A7099F
+:107F6000265F66C218725DD17E6359893918027A1C
+:107F700025D78142203A06AE243A2E3444F50F67C5
+:107F800027F07DE75B623D494F1F50BC645464BEDF
+:107F90001FD1559323983F194B4677C5C3047E5E86
+:107FA0009410651EB49B5813BE97D0F451B2103391
+:107FB0004D1F6A729C8CF303EDB822D04FD2791F0B
+:107FC000544DEDFA3D43A5F9852FD08E755E3A8963
+:107FD000F40DCCDB1A92F35CAE3F6DA8CF22FC56B9
+:107FE000ED7B5FEF8FEF98DEFED9C70E7CD7F217DF
+:107FF000B5C381FAEBF42D7F72601CB0B76FE1FB63
+:10800000E41B75F6FF55423E8209455390AE0BFCCA
+:108010007FCF8FB4D7D81AEE7F5E1E94DFAFE2FD1C
+:10802000EF483F604583FE3E4080C72913BFCFA97C
+:10803000E7C33AC187E5BBB69933DDD8BF6F0EF60B
+:108040007F5AEC6F4E373AE83D8586CFA25D23CD4F
+:1080500068F3FFA5D922DEE9B598B85EF6CEC0F781
+:10806000393E41373D9E07F7C513BCA5F7F0F7AB86
+:108070000BA1AF35A0177DCD3C8E927E1C4BDF76D9
+:108080004F433FFAD24D0AEDE3B0FE2DB04EF8D685
+:108090006CA4773CFA712E0CC8FE1C7DBC466D3F6B
+:1080A000B04CF07F09FE1A6F4E94388ECDFC3DDD4A
+:1080B000329D7DD17928271EC7BF2641D8D9F9EC3A
+:1080C000128CDBB9E7507642B478185A7A569CF78E
+:1080D000E3BD7E4C4FFB19A55312DC3C5E57F39178
+:1080E0009B51AE2A9B76537CC47DC1F7FA8C872ABC
+:1080F00005CD5F1851A80A843D365FD8637B189779
+:108100001BB0A337A3FC5FFEB9CE8E16E3BC419330
+:10811000FB4349243737E0B886E377F59368E3BA41
+:108120003B417EFFD5DB7169E3D1C6A7955788F740
+:10813000E7FA769A9C4F1172B76447F186BE408A7F
+:10814000F57BDF1F20E2C8519C2D4D8EF472B24C9E
+:10815000F02D2C0FCD77D0B834BE81BCA78B7749DA
+:10816000E9E8CFE8492EF4FC6F33B50EC0F9AAE771
+:108170007F5B8C739FED09FC5C6389DB3B0DFD2B02
+:10818000601E6E7045D80FA7D5DA833FC579B483DA
+:10819000CB71E4BA48C6D28B265A675739DC698955
+:1081A00076C1B771F87ED112C07A5A3FA7FC35B3B9
+:1081B00006D27963EDAC8103E9DD06A55A79E9FDC4
+:1081C0001F3BD13E6DCF65E45F6873C8F81EC1C523
+:1081D000660CA69CFE2BD596AFDF421DB4A385E2AC
+:1081E000B79EFA4AF827BEB214461BE7D9046E07B9
+:1081F0006AF74F6E14F3E8C666FEDE6ED1D66233C0
+:10820000F901D6C8F7355E525CD332A1A9AF61A49B
+:1082100019F9ACE7C752CF15F40EBC1B5FD8EDC4FB
+:10822000D7A5FA776DE21ED302211F335D6E61A7D9
+:10823000F9E81DF1923A23D9F7CBDCD5B4BF59A1A7
+:10824000467F8F35C66538EF78F4E358D8A890DEBE
+:10825000D3E3BF6CC7DA0D7D198E9F8FAFFB384219
+:10826000FD48CF8871B2D6CBF9BB4CB16EFF174732
+:1082700094BC5700800000001F8B08000000000025
+:10828000000BB57C0D7854D5B5E83E73CEFC243395
+:108290004926FF21413C21111212E2908400017114
+:1082A000F24BC408030182607540518490207A5BD0
+:1082B000EFABB79990682DFA7AA358CB6DEDFD0618
+:1082C0002BAD0A4880A08126E9041403040D820A1C
+:1082D00096D68014B1053280B5587D8FB7D6DAFBBB
+:1082E00064664E92426F5F87D69D7DCE3EFBACBDED
+:1082F000FED7DA6B9F65ECD94B720E630FB7CB8C50
+:10830000E53356FBACEC65A98C2D63CAE9BE0C467F
+:10831000BF6BA9F85F67E59204C6EEC53F5568DB01
+:1083200057553278AE5CAE9985CFF56F90995982EA
+:10833000EB1EEF53C971D036498E4618C71E379EC3
+:10834000EEB33066817FD746D33C8C25E0FCFCD76A
+:1083500023B1A75260FEB38AFFBD0878EE2CC0E1BE
+:1083600081799678F873F47EF8FF32C78C2F2478E1
+:10837000DFFDEDF229730E5E5D6D32C0F8A52F4969
+:108380006C1D8CBFFF69DD78B12EFD3A1EDAF0A3BB
+:10839000B9E91981710F7B9F0BE9C3DA5456C0D834
+:1083A0007D023EF6EA7F05EE73F84DAE08C632ED6B
+:1083B000117167B3A05BC0265D4B63ACCE1A99C345
+:1083C000A2A03533C2233B64F46E02B8D644C08207
+:1083D00001CE355BA3BD1EC4E3EA68C646C0B8F64D
+:1083E0008D26B70DE6C4DFED8C9DAB6F9E9B9E0E78
+:1083F000EBAF7F7A6EBAC2D82CBB9DB189408FB6E5
+:10840000E7685CB7E29A6487FE2A4BDF8FEF5683FA
+:10841000F03899D363995C696286C07CFA7659B367
+:10842000F1CBBEA0751621FC56F86312C02FFF3D9C
+:10843000F8D5C4685B006EFDBC7FAADF1002F74A66
+:1084400085395B6C81F568E326DA0DB41EFDF37A9D
+:108450007A30E6A5717ABAAC443A04D117E15400F7
+:10846000AF3D1D56EF5A89F888E0F6748411DC1789
+:1084700093D6CD3D93C7D8617C00E0AE1DF132F5B7
+:108480005F515C6E7B3C5EF48F728DC76762199B97
+:10849000323CDE6046C6607C2ECE0FE3768539F333
+:1084A000988CD75DB1C807D31BFAAA2C40AA3AFB17
+:1084B000A40A05DE33FDB9BEAA30E83F629FCCFBBB
+:1084C0009BFA8E5A1C8C35B02915A5F0FC63700FF1
+:1084D000E7BB5E9B6F762D66C0573580534B0CB45F
+:1084E000C7C6BC8DF256D35B59214542CB984FCAC3
+:1084F000057E7046FAAC39D4678530AE33CAFD1FAD
+:10850000B8BE55579B2EC938EE98C2E5A53B8EF0F4
+:10851000A000EC61F05C53B853B503BE9A622C8E98
+:10852000C654BAEE098BC1BE535583AE6BF4C0E797
+:10853000108E2603734643DB75604C545FF6F0786B
+:10854000EBAA57AB14A0FFBEFA0C6AF5F78B4CF6FA
+:1085500074073C5F6460EE16DBE0FBAF22BF109D4A
+:10856000D414A4736DB789E41C7F12F0FD2AA1878F
+:108570006A81405100CFAA63CC171E89E3CABF505D
+:10858000B06D95D8E910BE6281BE3C3CDC37DAD6CE
+:10859000E27C4A309F703C152BA9554AD07B4B6D2D
+:1085A00099217D39D19081EB6172B86313E0574E08
+:1085B00031ACDE01EB976F8616F0A1D81DF2126880
+:1085C0009B4BA6CB4BA16D34B2852DD81AD8F26047
+:1085D0003C750879D2DA4B76D76F90EE17DEEF2D27
+:1085E000B0929E1A6927F916EB6D941C3ED4439EF7
+:1085F0002EE6D804D79A6417E37CDCC2908F7F2FD5
+:10860000E671980D3B55E0D7F7EC0F12FF3AA20C3C
+:108610008FA642FFA3E615150AF0AF23C5702515F6
+:1086200078F478F34ADECF325C190DFD4F9A6B78FF
+:108630007F2A4C99CCD8C9E655159E6C9C97EB3196
+:10864000B6C59985EF510C12C9A9B2D7E46D843F24
+:108650009B22393F3519812F6370BC4AE39F6A28FA
+:10866000DE6C05FE578A9DEA6A1BC735F2C3FFB46C
+:10867000D5F0285B0DAB118FD822BECF88756B74F7
+:1086800060ADCEAC39A8175A9C59732310AFEECF0A
+:1086900011AF793DBDD3510FB77EF049813B9BD3DC
+:1086A0000BE7C9EB612C12D673E1AD9B36CA528041
+:1086B0003E97EC45E7515F4BA0A61F877549AA9DE1
+:1086C000DD0372D7E864AA09D695C85EB2A3FD306F
+:1086D000207D4005B532AE5F3AA35C5FE2736CA4C7
+:1086E0008FEC4CB5DDF515BE5FD3CFAC3766483D9A
+:1086F000ACD757A69CC765067C1093D2767C29EA36
+:10870000F3DF9A1DB7A8088F933D0E706C33308548
+:10871000C5107B642870DFCAC21DEB50DE1D2CC95A
+:1087200003F2856823E0E01707F6D02864485B076A
+:108730003C5FCAA09D8470DD4AEB92919F263097E2
+:108740008C7AAB8079ADD8F677BC9584F87A3E8C7C
+:10875000DDE782D6F22A737A83F4467EB444F89F2A
+:108760001563A436DCD83217F934FC12B3A31FD03A
+:10877000FF0B9382F38360DC89D71DFB0D0CE1FCBA
+:10878000B5D16B8F82BE3F53515F6681F9FA059D6B
+:10879000B5799F37A999D1D0AF8A91082FBF2EE222
+:1087A000F6D8FF85C9FB722AE2C7B2DA1B2457E369
+:1087B000A3F9B8BAB8E2B1D1F07C4B4738C3F74F50
+:1087C000EA0C3720FE376FC90D433ED886B881F5D5
+:1087D000C798ED8FE07C315700DE54BAEE24BC2AF6
+:1087E000EA8428C06BE14C9BBA0EF0FEEBB0969980
+:1087F000C8F7FEAD06F632BC629BC93107FBDB2E23
+:10880000AB76D4B3BF4E6D09A7F56C35D07AB6857B
+:10881000FBC7AD01B8D7652815089F62650AEA5FF6
+:10882000C550AC3E02D7A74573FDA8E9E39A689509
+:10883000FACF4BF0FE5C1C5744725326DB48DEFA3D
+:10884000FDCC6B86F7C4CFEB95911EE173809590BC
+:10885000DF159FCC703E17121A5A9BD1AB929E75B2
+:10886000DA9600DDA70B3D3BFD644D258BC48EE3FE
+:10887000D854986F9FCDC8705DB7B13ED902FDDB6B
+:10888000AE32870FF9E7AA427E981DFE05FB7B6595
+:10889000629E5F494C898271455FAA0AF257110BAB
+:1088A000F5DBCA36947F81F6ADC4A2BB8EFE5C2494
+:1088B000B64AE03ACCB3285AF861A3D8A86BA4CF43
+:1088C00060D6046147555C7FF67FE1BAFA2B4C0E07
+:1088D0005CFF769BF3E3A9A8077B8D6C131B5E8E70
+:1088E0007E550F1A7D0C08C7D570E68D253EB42144
+:1088F000FDC76D68F684C17AC7A5F3F991DF506FA3
+:108900008CFD455C2CEAED8868AE4FB456E32FE44D
+:10891000237B14E723FBAD01F9FB5E742A8DD3E4BE
+:1089200009F90BE7D963F42E760D6117812FBF8704
+:108930007CB9DDC62A90CF9F19615988F2A4BD6722
+:10894000B7E07B7DFB54C39A2E23AEFB2FA0FF0123
+:10895000EED2E4ABA660FBDD15C7E12D93BF25BFCA
+:10896000FA62BB44FE7C423BD7D7C17C316268BE11
+:108970007801F17A3DBED0C7011A5FECB81E5F7472
+:10898000FF637CF18B68E1DF0ECB17DF46E2FA1F55
+:10899000EB2849647FC78F69137C30DCFD2956AE14
+:1089A000D7F4D7DB053E779B9AEFCC41B9BFCBE03C
+:1089B00040B906AAA7CC05FBB23B9C3FC794D5693A
+:1089C000D8DFAE703DB2BDDD4C7A64BBCDED267B09
+:1089D0009D6461E82730C5DDF77DD47FC916755DDC
+:1089E00010DF3E2EF4408BD137E573F47F0F70FA21
+:1089F0004EBE2B5736C1B8110F70B9CE3F67DA287B
+:108A0000C33CD53145BE6818DF17CDED62DD1918BE
+:108A1000057C597BC644FAEDADCE23E54E1BF937F4
+:108A20004EE4AF497B8E941767E378CE47DDA2D53D
+:108A3000FA53704D3164768E25017E5DC24E4C61D5
+:108A40005C0FB9903F72027DE634523CA6F141358D
+:108A500063596827E6F639CA908DAA2A42E95BED88
+:108A60009B4971DFFCE3CEB20858D77C97EEBEA0DD
+:108A70007FB58EFEE007FF01E564D5E6DE4E1BF212
+:108A8000ADCAED698B697516F77B56A7A1FFAFC913
+:108A900011FD004F2DBFCF78795D901D5763F83AD7
+:108AA0009F752874DFD367F2DE0297FE37E3CFB5F8
+:108AB000087BF3AD90E3DCC7DE588CFC9BB7DCB9D8
+:108AC0000FF1BF284EA6EBFFC97C9634A48F43213B
+:108AD000FFABC5A8967C2E05C631C5956183FB7B8F
+:108AE000E2C3F3F0FDD531EE6B4827A6F8BBF1B930
+:108AF0004985B9792857B6094DB1687F34B801AEB8
+:108B00008A4DB6001C1A5CE785FEA98E59720DF1DC
+:108B100080CFA15E693B75D682CF6B746FE9B8C414
+:108B2000E91D447FA47780FED27DD8D7F06011ADD7
+:108B3000D6FFE7E9EF1B89F41896FE18F747FE8F7A
+:108B4000E83F2A6608FA833F958ED7357FAAC50489
+:108B50007E7576A0AFD1BDDA5E44E31C265819FAC3
+:108B60004F9D1057A21CBAA3D1B9613BEDFC5DFD2E
+:108B7000BF3F3B0A5C4036292686CB93C93F06FDA2
+:108B80008D093E89FCBE0920F0F7909F3592F49D37
+:108B900043E0879D95A4B319DC05BF9682FE9F2F05
+:108BA00016E56082B9D287FCBEC33A3D05FDB75CCD
+:108BB000EBB434E4A737331E3B8426E7CDE4E53B32
+:108BC0005F51037E8EA6D7F68969B5F797C770FA0D
+:108BD000DF0E6A16FD3D740D83E1D0F4379205E196
+:108BE000907CD5866B56D2C7ED7D80AFDB110EC071
+:108BF0006B97C45A517F17199C7125E88FC5FB14D8
+:108C0000EED77D3D4A05BEA96C7FF738C25B69B1DE
+:108C1000F930DFC21CC6F37D41F912BD9FABF925C7
+:108C20009ADFAFF92D5A7C89FE0DDECFC7EB00BF6E
+:108C3000DD0C00A2FDF159BC0DF0FEE72FAB994E03
+:108C400021AF0AACA352AC6336EB25B8D8B7D7AE88
+:108C50004D03FACC12F8A8EC86B83007EF3376173C
+:108C6000E0E12E85C78B7739203E0CE2A3D99343F0
+:108C7000FBF89B9E1098E77AE3F5FA7FAAC817FCE9
+:108C8000B371A6D676831D3A0D0C70B09EC734859D
+:108C9000A3658F82F1803BD380FC5827EC1A84C9EE
+:108CA00043DB2321AF8586BE1C07E0B76BCF37645B
+:108CB000FFF6EEF9E623F4E7A67CA130333C5FF83B
+:108CC000457E14EA07E60A9DB7EE8FAD56C6AF1390
+:108CD000FFD48AB5EFAFC78C18C267A1F637E79FFC
+:108CE0005F8FF37D7946E1BC2DDE5F6E72A7DB6D91
+:108CF000D8F2787FBFC4FD1DEDFE7E23C00DD737AF
+:108D0000C568717FAF42F919F89983E87C17C6FBF3
+:108D1000B901BADE75AEE20B2567307DF0F7FF23AF
+:108D2000DED7E2FCB744FCC0F69D30A900D78CD654
+:108D30004714F4A36724C9CC19F4DE3B542B730603
+:108D4000C5FB6FC4E8FC907DAFAD9F0576A4AE4730
+:108D50007684A1BCB66F3F9483FD5ED9611D828F7E
+:108D6000F4F89DD1FE8882FC9F10CBE5E67AEF2FC8
+:108D70001C077C722BD29D911F77B1402239D2D330
+:108D800077EF9E9FC7F6650F8FEFE1E8AFA7C36F40
+:108D9000CE1747215EAE470F3DDF76C23A3DB03E6B
+:108DA0001FACD303FED6DE7A3BF5DFAE4FA2BEC6C4
+:108DB000AF751DBF8C457F4DE3D3B258CE37537688
+:108DC000AF8F65B600BD347C5D1474AB668EF9B3AD
+:108DD000E0CF5D922382F48487F5261504EC55F5E7
+:108DE000B172F233347B552D671B51FF6AF60AD3FB
+:108DF000C2A8CFF4F6697E7A9111D5AADE2EC102FF
+:108E00008DC8BFD50B43AF57F4342B11D433109D0D
+:108E10002449E043F8D51A3C1F3217C1ABA7A70677
+:108E20009F1E2ECD9FAE1674837596E1D2E7AA459C
+:108E3000B48E417655ACF746EDA9393634CEBA72C8
+:108E4000AEF4FD9C21F87538BED5DFD7F44039BEAD
+:108E500020975A0FFA1109B10944AFF2AB26E60484
+:108E60007BC14686B1CF82F3EFAF6492BD7B54D80D
+:108E7000DFE1F8A6F6AA81B96303FC636C7BCE8AB6
+:108E8000FCB35B69B662DEF136DB9CC628C053E9F1
+:108E90001F8BE7A15F57D76760989A2A6BBFB40F03
+:108EA000E3F6BAE3CC81FAB0B8BDAB04F9ED6DA539
+:108EB00057A638FA4BC69E0BF20FDBDA1BADE83F24
+:108EC000B5C5C914A7EF8FE6FCA8DD6F89E5FCD70F
+:108ED00076E6F22CE710F73F13F74B4FE51AD1482F
+:108EE000F6C74750BEA1FC6903ADBF54B25755A2A7
+:108EF000FF718791FC7A885BFEF07DCC37B599B71E
+:108F000063AABEACED878FD881102DFFE7B306337F
+:108F1000E60FE6488E97615CB9EAEFC27EF9BC5471
+:108F2000DA8799F47F65F25FFD774B94F72807762F
+:108F3000C17EF93DA95ECC3FEC9178DFD3C1F3FE51
+:108F4000CCEE899D05EFF9A03276C23AE229AD7FD9
+:108F50004BEE3A261838289E7A6C17DF3F7AAC4CD5
+:108F6000A2FDA3327B0AF304F155F9D340CF3CE0D4
+:108F7000C7F6C462E4DFAA0A997983F87ABECBCA3D
+:108F8000BC41E3F7877178FC92D98BF9124D5E678B
+:108F90000AFEAE5E181B327E0EE37EE242D66C44C1
+:108FA000F9AE13F0D415013CF0FC4C11A7DEED4EE8
+:108FB00009796F256641606856DC68B28FB3BFECF3
+:108FC00023B33A473E796C31BC876570F9D0E4AC85
+:108FD0004CAE69223E48921C181FCF97C0AB9451EB
+:108FE000DF85CAD1ECC9A1FD394EBD7E089577BD9C
+:108FF0001ED7E47C7E876CC4387A7E91E46043E8B7
+:1090000003BD3FADD703930C8E7730AE9E7BD54921
+:10901000FC35480F9CACF887F4C05B205B93415E45
+:109020007FA4E9839BD84DA80FCAE42DEB913FFAAA
+:10903000C1AE9987E00FCD2E68F17639C827F203CB
+:109040003BCFF725CAAE829CC606E2ED01FD007E4D
+:109050008363087FE657B16921FB4903FA22C86F91
+:109060003016FCF37E4319F88BA65C846F24F3E47E
+:10907000919EA2FC1EB43ECAB3255DA23C4A1DC40B
+:10908000F114CFB35F125CA8D7A49800DFEBFD0901
+:109090002D4F3B42E409F4FC3090B79B67F4229FCC
+:1090A00069FC506EE772513E4FA6FCB99E3FB4F783
+:1090B0005D8F2F7C12F085F477F842C8D38DF2C50E
+:1090C000218D1FD259FA8DF083C6071A5FE8EDC5CE
+:1090D000415DDE65387B71F23AF6E29D0C23E9656D
+:1090E000BD9DD0ECC28138AE7FC7C7F27D8A999909
+:1090F000F36DE8578C407D80FE9EB0370379A30D59
+:109100009C0FDEE95BAA486837500FA406E15DE4D6
+:109110004D35BEAB7D9A51FEB052E89F8B1D3C9FF2
+:1091200056572A7B2DF06749FB73EB79DF48F9B678
+:1091300022A54BB1C0BCB31D9203F3354E917F9B6A
+:1091400075D5E455293F3FF47E7A95E01B8C73700A
+:10915000FC6CA7E4851074901EAABACAEDBE5E1F0F
+:109160005589FDF22ADD7EB9294ED0F56676F3BF2A
+:10917000D2EEC7C72570B919868EDAF31A1D35FAF3
+:109180004DC0B1283FFBBE36A911DC3F46FACDB831
+:10919000AAD03CA3E242FD962FCFE7FE27C574621A
+:1091A0007C5DFB25937BFCF0F05FCF2FBD59F3C3B3
+:1091B000855FAEBD7726C8780A3A863AFBA1BDE73F
+:1091C000BAF6423CAFA7D3E4B8D07842A387A6470B
+:1091D00007E15BE8D9E1E8753D3DABE9B37FB59EBA
+:1091E000D5E6D7EC80F65EBDFE1D2E3ED3F4E953E6
+:1091F0001B0D9417B94DC4C1B7893CEB8342CE9780
+:109200000B7DDBFF178B01FDAC6D9DDC1F7198EDB5
+:1092100087D06F08E4F3385D9F8C601EDC2F674AAF
+:10922000AF85F62F8B81A4B87F99CCF72FB7283E56
+:1092300017E96987C21A405EFE2AF2164FEEF52C36
+:10924000463DFDE4E93106DA47577CBD18174FCAA1
+:1092500055683F28DAAC52BEF76287D98ECFF5EF5A
+:10926000FE5E9711E7F90B7360A8F6768779603F89
+:1092700006F54299DC23635EBEDF0FBE388C9FB6D5
+:10928000D05782F1CE6DACB711E3EA42A4E310F4FB
+:109290007B55675FF479FB920EEE279544F0BA9FF9
+:1092A000E980467CEFF43613F985D7CBDB177DC90F
+:1092B000C85F1A94AF6FE37A0606119FDC68DEBEC2
+:1092C000107D3DE0E39FE8F40E1B267FBFCDC4F781
+:1092D00073FC478C0CFD5E762E6EC8BCCBF5F2F8A5
+:1092E000BB3BC39D6A24EEBB71FF7C7767B253CD55
+:1092F000197E7C4E9FBF18F395DBB6CC55284E14D3
+:10930000F9CF41FB223AFCED90589315F369ED8EAD
+:10931000528C3F86DBE728F63B69DE1BC51B63CD1D
+:109320009CCEA27EE9762163DBCE863B91BFB79DC2
+:109330004D76223CBB057F6AFCBEFBCCE570DACFE4
+:10934000343955DC07F6475B1C2F13BF723E6F198B
+:1093500031C68BFBADDB853C6C0BF71FCC8A0BDE7B
+:10936000CFE0FB179DF59EAA33E9B4DF2D61BE5116
+:10937000DB27F680BC505D4E0C237E32B21686EFA2
+:109380006D74B29F633B7D9A1A85F8BE1CA7ED47AA
+:10939000AA519467F8F64A816BFC60BCEFA877513C
+:1093A0003D496BFDC22A05607CB3DE4D6D5BFD72ED
+:1093B0006AF7D4AFA6FB6B0F453E8E76BFCEB9A041
+:1093C0004A09D21B9FC5F3FC526ED6E912E473F62C
+:1093D0000D6318EF4C7FA24F463D71FB555847482F
+:1093E000DD887219F14CF9CBB4403F555A12867C96
+:1093F00079FB55E8078D97E2A3391D9A94A65B0A7D
+:10940000485A881FC2E29D17E3E0FA0FED2E7F5CF9
+:109410003CF241F5BE0B8CFA97F1FA0EE96EF902B7
+:109420008CCBF31551DE380FF3C6B934ED62C4DFCF
+:10943000C42E13ED7B6BF9DB5C31AFF3ABD03C7228
+:109440009EC8DBBEC9FA289F9C6F81C0CA8070711C
+:10945000FA39A5F94912E6FBE24D0EAC579898E6A9
+:10946000CAC37C6B573CA3FC695757C24815F0E050
+:1094700054785ED7A9E575D9DFCFEB767F1AE9215D
+:109480007D057E0AEAA7EEA3910E1FEDFF59C8FFE6
+:10949000DB810F627D4338AF1760F3E6511EFD7626
+:1094A0000B5F07D89FF878CAFBF9F61D86E77E7B2D
+:1094B00099F17DC4DE93B43F5D62C84CEC0338F78C
+:1094C0004963A3B07DF1D3C86C6A8F469E47FC7494
+:1094D0001AAC2ABEF7C37A56857567CEF76DB49F6E
+:1094E00031FD7D9B82EDE1FA3EAA477BBFFE1CB5B4
+:1094F00047EAFDD41EADBF4AED3B701DF9E7103CB5
+:109500008F6DEEE2087A6EC7A20813C2DB19C9B6E6
+:1095100068EFC17A335FB8AF1593F9EFC57FBECE60
+:109520007213D83BB37BBC3481B113F19FCF54A0ED
+:109530007F68C6A87FFF0BDCFFDD4F2EACB3005C5D
+:10954000F38EDA5A7BA0FFE94F2EAEB3A19E3D14F5
+:109550000ECA0EF546FF4190749687363D99710507
+:109560003B19FAB1A2EFE99F590A245F50D297C57F
+:1095700080B5A6FCC43FD302785C6075FF1BF64D36
+:109580009E976696DE847DE6C17A2EBF64A4F89E1F
+:109590008D94E2B07E6599DD7D2C3EC87E3BA53F73
+:1095A000D2FE51815362D1714457DACF62F653B182
+:1095B000C1F2B6CC5E760CE971473CDFBF9A384DFC
+:1095C0007206D749E8C74D3CA396229D0ACE95372F
+:1095D000613BBB229AFAAE85939A509E4B6DC33D78
+:1095E0005F42CF2F8837127F162B52487D887E5CD2
+:1095F0001E3013FAC7FE03E194179878CCDD887506
+:10960000A36549A9B9B2D0798CFAD11B711F6D62DB
+:10961000E587A5B1283F36C981E6A180F535C5C6E5
+:1096200061FD231644E1BA9E2BC1FA9D89AAE4404C
+:10963000B41539BB5AF1F9224784A308FDF1636AD6
+:10964000299A9CA3CA84C3F9306E46BAECB0C044D0
+:10965000477D774CBD00FDA28C28CAE31629ABAF2D
+:109660001CA67E84A341C5756CFC792DCD63267B39
+:10967000BE6356C97F20FF14BBA228E7576A3B355B
+:1096800037B82E0CD64D7017D9656F9884FCFD83C2
+:10969000523BF4778C9218CACF515FE69FE97E77F0
+:1096A000B81A0680EE30D94B71BE1D26C9BE96FA97
+:1096B000AE121CEF196354314F541EF745C8FC33EA
+:1096C0004AA5296710FEECA80978AD62E4A590FBD5
+:1096D0003D8BAC64272ADFCF267FA867510AD98B40
+:1096E000CAF7A71563DB63E07E7AE5FB951574DFA7
+:1096F000C0E3DFCAC5DF718A3EC5BB958B5751BF3A
+:109700004B4AFC777CDF95ECA85CCCA3CD4CFF7A70
+:10971000AE12ECFFADCE24F9CF1579BC2243E6FAA8
+:109720006900FFA307F83E4465B6145237372BFF94
+:1097300054483DA86BDA1721FDB9A59742EA43E7E3
+:10974000557E1DD25F304FAA0A1E5F7A209FEC6BB8
+:10975000BEA85FD2F24B458285DEA9CFA82A05B903
+:109760003C00ED03A01F8A7A45DE55E1717506FCC9
+:10977000433D586AD3E577994AFBD915DD7CDFBABA
+:109780003CCE783AD83E54C84F707F41B7FEDC03D8
+:1097900046B293B9D132E5AB34F82A46863EAFF9EA
+:1097A0005F1502CE1D0677530CE5C79CBDE87F68A8
+:1097B000F06BEFD7E0AE90EF29A5EDBFEBC0AF8720
+:1097C000170025FF4D0FC78178118780BF41FE59D3
+:1097D00037AF4B835FDC50765BF3CF2B414F4507B0
+:1097E000EB299B1487F576C3E9296DDEE1FC306D2A
+:1097F000DE6576173DEFDCFAD9D14239A89F7A2A87
+:109800003626B8FFDA67EB43EEC79FAA8A0EEE6FE3
+:10981000FAAC0AEF4F57D4461BF0E34126393CC857
+:109820009F3DAA82FBCF25C79C4DD8969D74639916
+:10983000299B71C6D384EDD4F3DE1E33ACEB8E0CC2
+:1098400059C5B85DF33FF4F09A13781C72F0AA6A18
+:10985000C5FDD31D1ED58AFEFB8E27542BFA1F3B58
+:109860009CAC02E331679A6135FAF3CE2C5E6778DF
+:1098700055E8E16FE2F9F35A7B5A717F837A11EB75
+:10988000C2D127A8FDDA4F75E007D1AFCA1EEC5749
+:109890001D54BC367CDFC127BCB6E07DC21BF5ABD6
+:1098A000FE8C363A1EF96C4E887C9658EEAE0A96BF
+:1098B000EF32FB9290FB9FC6A904FF8CA48743C69E
+:1098C000DDA13E12D2077F3103FD914613A33A5921
+:1098D0008F81D7C9EAF1F8A8C0A3C36647378619B4
+:1098E000E354AA6BD38F739470FCE9AFA727F0B849
+:1098F0006823C80CB6F72470F8F475B1FA3EC47C3E
+:109900000B713E983909F9DC61355C0157973913C1
+:1099100092EEA47AD93CC3A369D0AF4EC8E2FDA9A8
+:10992000869D581F7B774236EFDF6AC833821FF06F
+:109930002B36FE4EAC07AF0D13759D0F24D27E98CB
+:1099400016DF2886532F2EC638738F9161FEFE19BD
+:1099500013D8BDDCC0BEB9D5CCE352AB89D76D3FBF
+:10996000957AF429D41B6A987B7A02F951C52AE2C8
+:10997000EFBCDD42759D8FED2E4B44FADF93C0F3B3
+:109980005C593BA726A17EF917BC7F56C2C4E1DF14
+:109990008F75BE38CFF91D59E47F67DD0CE895025D
+:1099A000F887F098AE87419840E725983309F36C23
+:1099B0008DD1269AE79E04CE7F37DA0EAAFB8D3230
+:1099C000ACDE0EEDFD82FE0FE07B095FFE51737091
+:1099D00063CEEE1F35773CEF237D6539D78F7EACA4
+:1099E000FF3B11B4AFC246FA69FFE5E37BB21CE866
+:1099F0009F7E12CEF1B7D03BBAB14FC5FA0DEF4DF5
+:109A0000582F9191E8AE453C2C327B6F21FEB1ADD1
+:109A10008EC0F96FB41E78F07B218004FA544FE1B8
+:109A2000F4D1DE0B38B5A03DF8589C03D1E080F7A7
+:109A3000FF00F9408367000E5D5DB89667AEFBA33B
+:109A400081F20C7512E83DE8EF3CC91C1E98E7A2B4
+:109A5000E6AF8BBC266E45E17BA61C5E5A62833660
+:109A6000BF6D258F737B95903CD7A4E38A7EBF831F
+:109A7000ECD654ED795D9E71AA886BA7EAE2DA17FD
+:109A800013849D4966C9C1798035226EB8DC333AAA
+:109A90000AFD4CD45132E0D5A4CA6C724C40CE5B66
+:109AA00021EE674171BFC667E38FD9EF47B8C71F83
+:109AB00063F7915DD7E61DC82F70BC5C3ECEF132D6
+:109AC000A12FE3A7D3A06FEC3632AF1A584F21076E
+:109AD000955DC6FFE078BBC98B75CB05077E99E71E
+:109AE000834BE624035383F010A6863335482F5A60
+:109AF000336242FAB2866F61CFF3C4FC118EE490F8
+:109B000079F6C49477A37DCFB32D27FB1E357974E6
+:109B1000C83CAC4709B1F3B028DABF9C0840FD0C43
+:109B2000F05A704C09B1E793E23CB86236F9A4A24E
+:109B3000B3FFCD32CA41E199D0EB0786A3CB70F8D1
+:109B400063393F45FFEE1FC55FB433147FB115A1E4
+:109B5000F88B7785E22F7161289E46B843F192B267
+:109B60007C5CC8FD9B56E786F46F7EBC30647C2A23
+:109B700018A4E07EDAD33343C6DFD23C37A43F7665
+:109B8000C3A290F199DEA521F7B35E5D7143F41E87
+:109B9000DFB226649C9EDEB7B6FDAF9079357A7B46
+:109BA000E0DFBF82DEE6C4507AA70AFD1AEDE4F5D5
+:109BB00065FD46DBD312E8234C13A15E8B6E7FF765
+:109BC0006BCC43788A55AA9FF3CC64B40FFD82EC2A
+:109BD00092500FA5C0148634AA5FA7FABB1F1B0CB6
+:109BE00021FBE28989DCBE2726F27CCDCF4DFCDC4F
+:109BF000520AF88F64870C2C102F031E22315EA6A8
+:109C000078FAC7CF60BCDC14DD97A1427C6CC6FE3D
+:109C10004D017DB9C8AC36F6013E26C85C1F829E58
+:109C20004C4B84F93F919E30723FC263443F22C542
+:109C3000C23C91B9643F287F1CCDE224ACC78F0A97
+:109C4000E869F51A106BDF8A2C3A07F51E4282FE8E
+:109C5000AF2586ECE8DD9A7E5A9E49FAE9B22DD40A
+:109C60000FBBFC401A5D3F71AF99F6FB4F883A4439
+:109C70006DFDE784DEFA53BD85DAF3F5F6103DB6E7
+:109C80007CE3FA08F41F4F64707F51BB5E82789BBF
+:109C900088AD2CEC9AC58EF9AC7BC0384701BE5715
+:109CA00075F7452E62E43716E3BA6B375EB9F74DA8
+:109CB000E8D719FC09DC3E7878BDCCC78CFCCFEA2C
+:109CC0006F5888FF343791C7E973C5FC0BA0B10307
+:109CD0009E1600FEA3B17D775A39F2275CA7F3697F
+:109CE000B3BB19D59FCC71A7D23EE351E6F87017EC
+:109CF00080F89D4495E09CC75CB45FFFD1BDAB226A
+:109D000070DCC07CDA3CC028E86F7C1CED3126603A
+:109D1000DC7F1BAF6F80F759F0BAEB9E9427D10E12
+:109D200069EFFB88B92F7C88FBDDCC41F36AF33304
+:109D30001613A29F762C5FF9692CBC6FCD0103E549
+:109D400013D6749829EEEA5FF1D7AD2FC2FDFB520E
+:109D5000FA6E42BBFCC98A6FC6203FDCBD01F4101D
+:109D6000ACB130CAFD7062509C72E2812B11781F39
+:109D7000ECEBA617D1386E36537DEF272B368F09C3
+:109D8000F6471F4D2CAAC5E7D8E41B3B6F58F27A63
+:109D90006622D563097E7A58F0D39AD7C6921FB54A
+:109DA0002662809F787F13AFEFD0D6F1A1E0C71570
+:109DB000AF7F5D107CCE7407F0913A86EF6BA920DF
+:109DC000533B7B2EE7E0FD57147713C2D779F57428
+:109DD00024F677BEF737829FCDBB317851063D051B
+:109DE00081FD65EDDCE5C2F6D83CA43BC85933CE15
+:109DF000BFE837AF5DF81DE2A763F3A6EFE3981B5A
+:109E00003C7FC9847D71083C807DA1F8A09F85F3CB
+:109E1000731D428F2AB8839E86E7991C2AF1B3935B
+:109E20001DC27D97C62E03C3BA9548DCB409CAB3D8
+:109E300045CA06CD08392D49A09F855E7925F1E4F4
+:109E40009D4DE4E787FA3DF96FAF08F1775CF08F3D
+:109E5000FC9D97DC8D9807BAAEDFE3332C3145DDEE
+:109E6000B8FF0381B0532A105B38F06B4B14FB2210
+:109E7000420F77A21C61FD3FCE85F97A5F383F67BC
+:109E80000CA602F5F80F604DF8B02945B4D2C50C08
+:109E90000BE8C5BD897F78E669D0939674BE5EEC09
+:109EA00037E2DFDD9CDF06FCABB7C7919E62DFC205
+:109EB000DB100F225FA1A7533EC8078B0D9233F131
+:109EC000BC6FFFDF22314FBB35467D1FE9E03F20ED
+:109ED000D33E4D98D2678A1E222E7B13F59E89FBB6
+:109EE0004D546FDEC6F38116D5C9300E08B3DB279B
+:109EF000049FB36B17FA6ED5FE4F4699800E170C70
+:109F00003D91D9307FCDAE1D91E8C6DF6B747F8A5D
+:109F10007CB7F2C40705763ACFB671149D03F08D75
+:109F2000A6BA83F10AF328B983E1A8DB904BC6B83F
+:109F3000760325E3D9F8F6BC87501FD5F9F83A71B6
+:109F40006E2CFCCB6C63D4BFD8D61883F3D5FDB68A
+:109F50002319E567733C8F135FBF3A8E3FAF30051F
+:109F6000C77F99182DF8D96BC03863B3884F2E5E20
+:109F700035D038EDFDE3DB8A643BF043B6AF792F93
+:109F8000C543ED6615E91AF60AE378680F2339AF81
+:109F9000EB9CC1309FDF1FCD1C12DCDF1AEEFF03EC
+:109FA0009D33EB30AB981F0DB337B318987FABD808
+:109FB0000FCD048EC2F34ADA75ED7D61ED3FC558D1
+:109FC00002F981F2B4614A33BBCD168CE708C27343
+:109FD0003CF2533CBEC767C0FC88FF16C65E26B87D
+:109FE0000270327AAF066726F9735B4DFEB3787E56
+:109FF00005E0B223FD33198793B58F5531BE0FB3FA
+:10A000003B691D6176D5E19106C35597C3BC68BF16
+:10A010007FBC960DC82BCA6F5D78A06F0119D83A26
+:10A020009A09F9B63F5B3A2DB80F8A6472E0F9716C
+:10A030001B629E6D1A49718347C63816DA88185C10
+:10A04000A7CACF3B636A2897E301F7C5AD167E7FA9
+:10A05000603CF0B70DFB363ECE1165B7CE94484E4E
+:10A0600028AF572BE4FD31C977F67690D3BFF8F6C9
+:10A07000E6A8004BCDBB7B884F571ADA5F1C0FF761
+:10A08000375ADCF94980CFB74E1AE81CE99F5E0BBE
+:10A09000F35662FCB87B63827308F9D0CFFFC3E349
+:10A0A0006B9F4F41FAEF9654CC9BF61BFDA310DE3D
+:10A0B000DAF6CF4D548FD0768AEA938E24B99DF884
+:10A0C0009EC96D0DB46F3C8535D3BE7196387FDD6A
+:10A0D00092C4F5C7E563635E6E08C2FF8349DC0F77
+:10A0E000637EF7CD2837ED423E3BD12F817697F046
+:10A0F0008F7675DD9DA606E5FD1AD8DE14C4F75AE5
+:10A10000F636B5DAF57E2F3FCF98F591E53E67102C
+:10A11000FFB993B89FE716EFF327B91724A1DC76B0
+:10A120009D3645AA785EA56514DA9116F09FEC433A
+:10A13000E065406E757254A7F84D38BEEE1C3F774F
+:10A140000A746EC2FAFFCD1FB58D5B02D77701AEE0
+:10A15000B1DED373C24C758FBB8CAE141CDFF0E143
+:10A160005739A8B72A1069F0BFAF3A56DE8C78038A
+:10A17000BE2F0E47F9DACE488F69F2998DF209CFDA
+:10A180006723DFE7633F93F4F056532F3FF7B98B14
+:10A190009FFB04BE273900BEB7A39F906D0739A06F
+:10A1A000E7C7927C6FED35D0F9540FE8F15BA85FFB
+:10A1B0005C85FDADBDA576926FCCC3E7A29CFAF697
+:10A1C000D23C2D108320E924E60AF61FDB132389F5
+:10A1D0008F35FD783091EBFF960C350AEBFFADB271
+:10A1E0001C2217417690F7859DECDD50FCEC0BD3DB
+:10A1F000D0DE09BB20FC27769CEBF94785AD5AF3EE
+:10A200004EE1EC2DB0CE3587E5817A6EF4577D8234
+:10A210004FF60AFF15ED849AC7EB67F0FAC40DBC40
+:10A22000CEB5C0B9BA04CB38265734EFC3B6D0D5B3
+:10A230005282678EA72DECDDC7CF1EF3F3E3AD7B13
+:10A24000EFC8C27DEAFE136686FB24AD7FF3FFE113
+:10A2500075C0C3773B01FF43D825580EF11F58EA5C
+:10A26000149634F87EBFA4E98FF995286F175BE543
+:10A27000401FEC612D3038F67F9D54F5AC07004B44
+:10A280001BE17C1D59A230D94D6DFF91BF25A02D3A
+:10A29000D8758CFB4DAD266716F24FEBE8D0F3FA7C
+:10A2A0005AFB62123FE79C6F6643E6250F09BB37F6
+:10A2B000C6C39E413EAA6D95ED5EA0FB8556D96949
+:10A2C00002FFE6ACD39D806765CE31CF82A968E7F7
+:10A2D00045DCA87D4F6519FA2760A71E7C61501EDA
+:10A2E000DF807CF450BBC47E066B5EFED2D0FB0ADE
+:10A2F00035629E87DB36EE4F013AAE7825745C8D71
+:10A30000A813ABD1F92F8792447C98C6D2D02F01E5
+:10A31000FE21BD605458B719F8F5C1647707C61B14
+:10A320009BC5770C407F921C7608BEDC2AEA04FCB1
+:10A330005B25DAD7CB7CD52B1BE0F942C52BA39D3F
+:10A3400062D0E23EC164A7BB1CF10BEB3E86FB353D
+:10A35000CB851E5CAEF9655EBE9F01E696FCB22918
+:10A36000CCDB1889EB7E5572F854FC8EC8A03A5CA1
+:10A370005A779D5877CD8623FB318C5BD5123AAE48
+:10A380004EACBB4EB76E6D5FFBCF49BA73C837B8E2
+:10A390006FF16723F7133E10F368F7CD23B83EAC97
+:10A3A00005F0906E355ED9EBE57E9D0DBFC373BFA2
+:10A3B00080F77E41EF3AE633A5C0B8552FF075B26D
+:10A3C0006743EB3F1F6C7DC484F1959E2F966F31E0
+:10A3D000923F0A8833A1BFA8E78B1562DD2B74EB8F
+:10A3E000AE754B3AB8B89F3C18AE960548D7555B4A
+:10A3F0008C0CEB11F5702D6B59528E7C36985F39B1
+:10A400005D5688F90270AEA6737C370AE7A8118200
+:10A410002FC7B17144978AD81BA28BDE8FDDBE7F18
+:10A420009C15E5FB72F7688ADF35BAEB9F2F177E24
+:10A43000F08C0D8CDA0B6D25D6F118A7F4181C9250
+:10A440004AF156E478C0475E87CC2AA1DFDF9EB68A
+:10A45000DE0378CF3D9C5F85F17CDE61039D77DB79
+:10A46000D99D4FFBC07907D263D3281FEDA0EFCD54
+:10A47000C03C643FFB7B72D7E3B980FE9ED27C9CDC
+:10A4800057827168E773851D68E8C9B5069FEF2E8E
+:10A4900018C1E3F5A7923EFB31FAE133B61BE97C24
+:10A4A000C30CA3FF3DAC9FDAD9ADD0BE75CDE1A5FD
+:10A4B0006BC390AEAF49B46FBDBF774DDC62E4AB08
+:10A4C00076A31DF7A1FBDBFF6D2FDEF76C91E87B18
+:10A4D00012751D65595BA19FBB31CF117CDE2B37F7
+:10A4E0005A25F8D8082BC5C3336E32925D3C9F6C59
+:10A4F000FD25FA372B9C1B498ECFEFD969A2FAB9FB
+:10A50000AD1243D3BF3F69DF1B888FF36F1E31A1AC
+:10A51000935DD27AC4D4F777ECFD052F04FE1407BF
+:10A52000379B304E59B551EBF799904E2EE1FFD441
+:10A53000BE728AFA2BDA24D2332B5E92E93CFBBE40
+:10A540008EB74CC8C7B55B2496981A747F8314F2F3
+:10A550001D84A58CF3C152A1675632EF53C9306EEA
+:10A560006533AF23604F87D6E5AEDC3287BEDBB400
+:10A57000AC79687DF3B0E0EB87301EBC15BF831467
+:10A580003AEE61EDBB5C3A7E7E5CE3E74C9689FC7B
+:10A59000FC55911A950DD7BF3AB2E2E6A1CEB1F7BC
+:10A5A000083BACD9C1CB3E03D911FDB88B6D570820
+:10A5B000DEBA9ECB26B483E5ED9708EF95ED5D54AA
+:10A5C000C7711773D7209EEE6AB7DA518E2BFBB88E
+:10A5D0005E9AD96EF67A25BCDFD284F4ECEFE4758E
+:10A5E0008B9E3D12F92F9ABE7A48E0EF2181BF87FA
+:10A5F0004041A7E4A21FCBE3DE873336EE8F81FB19
+:10A60000B5E27ACD817D91E8EFCD6497EE457AC0D1
+:10A610007B18BE87BD148AE73B1987E3CE2DBCDECD
+:10A62000596FAFFA4764CDA6FC23C49D084FCD9661
+:10A63000503CD7EAE2ED7523B87DDEA4C373A59F35
+:10A6400059B3110E5576786974AF82EFEDCE91282B
+:10A65000BFDAADA6450DB5FFA8B5EF09BF59EBCFE1
+:10A6600016E7AB5BECCDB6E038D894CCEDFF8A2989
+:10A67000B207E934103FA4EFCB510D81F801E28617
+:10A68000DF8C88E771041674BC3B5266717181F8E7
+:10A69000E18749EB2B73A15FB785CBF9C5C9301FA3
+:10A6A0007EDF4B61E45FD66D31D339C03AA03BC544
+:10A6B00009EDFC1C83AB5D2A437A83FFFDEE88899C
+:10A6C00078AE8619E360DD73DA389FCF29BD447C0C
+:10A6D00072209DAFF7B2A2260EE58F6B7E389EC327
+:10A6E0005283CF3F805CE2F8DA765E0FD4BAF7EBA4
+:10A6F00051A9A8D73AFE3A6A09B45746F0F56B7EDD
+:10A700009E1FFCBCD1DCCF3986FEE7839ADCD8F9EA
+:10A710003EDA83C2CE30A989F8BBD6D8F2760CFADD
+:10A720004D5BF9BE3DDB6DC46F9CB1860F5E6F8AD9
+:10A7300081755F7C5DA27A347CFE09E0B38B4B5B54
+:10A740004EA31FFDD5560BF98F0F828F383D77B082
+:10A750003C6A72AB7D77AA81AD257F722D6BA276A4
+:10A7600095E0E38B6D8D26CA9B79839E1F3DD8EFC4
+:10A7700058A5E33B537228BF357C104EFE5FFF01A6
+:10A78000D98EFB2780A7FF4E0EC687F02F5AF7867B
+:10A79000113DFB8FD8C85EFC49F0D97991376E988E
+:10A7A0002CD3FA0D53789BD5F9D668A41FE21BEB86
+:10A7B000DE3777BE358E9FA7F612DE57BE8A49F187
+:10A7C00020385BAC94DBD3FA0D1F2CA2EFF0D4ED54
+:10A7D00019806B8C292E00D770FC2F493C1E344801
+:10A7E000A1F160DD6ED9155CEF05EBB90FF54F9265
+:10A7F0009003A6F813D02F1999AC92FD6A68E7F47C
+:10A800003474F016DEBF80E73B8CF4FE41F78B3DDD
+:10A810003578FFAB542BDF4FBEEAA9C4FE7747CB98
+:10A82000544FF9DD0F568C0DD69B0CE1047AD619E6
+:10A83000FD0914371E31107C75472E27A4DB501FED
+:10A840006D2CB567A3DEE1FA6EFF68EB72E4630F6F
+:10A85000BE373130CF6BC2DE325C6F127A152FF00B
+:10A8600079C57AD7B2B9223EE67C942DFC3D882B7F
+:10A8700026264F1C1C57DCA83F09F6E0E86209EBCE
+:10A8800089140FC6B53B8F737DD0D0F1D0A7C8E730
+:10A89000759F98A9BEEABB9D0F8DA53A5BB7FB5685
+:10A8A000F42BBEEA7CF856CAF3496B092E0FC29707
+:10A8B00084FECB8709580FBAAAE3C304B2AFBB2604
+:10A8C000AEF744A09F927B275E07BF81F80FFC176D
+:10A8D000E2BF9D3DF99ABF62C579571D505C889FC4
+:10A8E0005507F20F55A21F71B8381FD5B874389F9D
+:10A8F000FC953CF4576C01FF455B4F6532AF77E93F
+:10A90000EF0AA33C81C44673FE61E921FC53D3FAEC
+:10A910000ED9F59A3639A46E507BCE9DACF07D7E73
+:10A920008D7F5A2427F1C776DED6B4EDA4F5AD3479
+:10A93000B610BD1BB618F9FDADBCD5EAAA3D2CC6B4
+:10A9400083F8388497800E334D5EFA6EC5C154EE9D
+:10A95000BFEBE9F15932CF631C3CE1BE19F9E56068
+:10A96000917BAC7D08FBE061C53C3E9504BE5BF984
+:10A970007925FDB853C93C8E8F8C0D3D3F3A605F01
+:10A980009239FFCC340DFD3DBD9F69F2C4D833062A
+:10A99000E08BA39546FB3AE1B78F08FA5E42D55D9E
+:10A9A00046F20F8E32FB3B5867384BD3AF93B95DFD
+:10A9B000D5F2DDAE0D2ADFD7197CAE91F4E47C6DC3
+:10A9C0003EFD7969E1D7CCD7F935EB35FD37868D7A
+:10A9D00041FDD722CEB9ADC90CF306E7A3F4ED7E55
+:10A9E000B18F81E775B06DC8FC98F23607BB4EBCDD
+:10A9F00041756627C2D8689E97A3FCF5AA61F2D775
+:10AA00000D03F2382F84BF347A5C10DF55D1D3E3C5
+:10AA10000D81776D9F2D5CECB39D56DC6F24535DEB
+:10AA2000D67913FF8E9A9FE2AB864CEE1F5D28937A
+:10AA3000685F1CE01C650ED2EB1746F0B8EABB0B52
+:10AA400024CA9B76E1788C9F5A24AAAB5EE5EB354D
+:10AA5000211F8D695DF224C9AB871D6341DFA99871
+:10AA60006DE17671806EDABA07EC568C87EBE138CF
+:10AA70006A713CDAC159C2EEE9CF218D65BDE51896
+:10AA800057563B2507EEDBEBE93D77E18477E2FFA4
+:10AA9000013A9F4B761F21FDD67B7901E63F0F6679
+:10AAA0007E3E0AED65ED307CFB3BC1B7DAF7591C01
+:10AAB00063D546FC3EC98F12DD9F207EFB0DDF462D
+:10AAC0008E63F87CDF7FAF91902E8CE8319C9C9C4C
+:10AAD00012F39D4A16DF258CE3FB24CBB18FF26A7B
+:10AAE000F48EA4FC42F68DED4B35EC7E3707F5D69F
+:10AAF000C5AE0339A6203A9E5F03F28EF6A3635FCC
+:10AB0000826A0BE63303F1972469FCA608BB18CAD6
+:10AB100077E791EFB2B1FD30321DF5EEF6A391B7B4
+:10AB2000E07CBB783BC09FED328D837867CCFC889E
+:10AB300060F89E24F82EB4F07918EB1B53353EF8DC
+:10AB40007EE3707C6B4CE1F584217CABADB705BF37
+:10AB50008783FE7DA799BE8783F9E6E820B9484D33
+:10AB6000E1F230497CFF660AF3D0F7002789EFE075
+:10AB70004C51984F89C17D2E9FCCF765F97986029B
+:10AB8000C1BF93145F17D6394C11FB3285AC97C601
+:10AB90004D677E6A9DCC4EE7148A9983DAC916DF29
+:10ABA0009D9876C96E69A1FA3F5F82127DD622CE4A
+:10ABB000430C41B7C0FA15FAEE0DF1A58CE761869A
+:10ABC000FE6E4A650A9773FA3807D2F702A3FC149F
+:10ABD0007EDF0C5F325561155877749BC22CE10003
+:10ABE000EFF6B70D24BF9D7DAA17EB401DB1E2B96A
+:10ABF0002F18D5BB4E7272F944D3827512DA7AF5EA
+:10AC0000782884F9303F364981C892F0E8A3F7DD0F
+:10AC1000CEF8398D22A6D207566EC78F27935EF7DE
+:10AC2000539C54027112EA7583C543F828C3E4CAE1
+:10AC300044BEBF1109F314364BEC38EE57A4F1F5BE
+:10AC40006AF3170223E0B9BD32B15E4C811E8FE179
+:10AC5000FB1E9154385C6AE7DF094AA0EF04DD2847
+:10AC60005EFB13F8772123EFF75FFC7E7E60FFC762
+:10AC700081DF0D8A0C7C8FD281E74C307FE753CE89
+:10AC800007FBCD77A72CAD4E9918A897636EA6A2A7
+:10AC90005FA1AF9743F49D0B3ADFACD57BBCEA9D37
+:10ACA000ABE2B9B98571163A4F9B6B199587762B34
+:10ACB00023D15D9D42751F5B6EA14914EF4457443B
+:10ACC00080CFADCC3919F11CA8D7E3DF4F1A38CFAC
+:10ACD00094C0E8FC9FD5CCEB199F01B9C0EF178158
+:10ACE00054A958D7C29E28A1FAC7A7A22D0E3C8707
+:10ACF000604678AD01781B2DA2EE475777D96833AF
+:10AD0000D0F7381B59389DE79E15E6FE1EAEFFB101
+:10AD100088623A2F9DB56D5A12F983B0DE69DA7AEE
+:10AD20000D83EB10B1FE0F9FD3D7FF69EBC2E3EBAE
+:10AD3000F85EBBC097B64EBB76DEC7A9849CF7D140
+:10AD4000D6FF4C385FA71177E2D3E85915F5837E1B
+:10AD50007D1A3FFC3FDDFB356D605C0000000000AC
+:10AD600000000000000000001F8B08000000000031
+:10AD7000000BBB26CBC0F0A31E815964181826F126
+:10AD8000A18AD112CFE066607804C42C3C0C0C85FB
+:10AD9000407B23807424101F01E2A340ACC2CBC0CF
+:10ADA000100BC471403C07C89F0BC4A5409C05759F
+:10ADB000632B0B03433B107702713710EB303330BA
+:10ADC000E832136F7FB10803C31309045F5112689F
+:10ADD000A734FDFC3FD8F00C7DFADAC76DC0C0B0D7
+:10ADE000D402C11703B29759A0AA596E81DF8C15FE
+:10ADF00068F22BD1F8ABF0E8DFA787CAD7D340734E
+:10AE00009F160383155298E86BE0770B3ACE04EA5D
+:10AE1000CD0262009F3090CD68030000000000006A
+:10AE200000000000000000001F8B08000000000070
+:10AE3000000BE57D0B7854D5B5F03E731EF3C8CCFE
+:10AE40006412420810C2092FA30D382121058AED92
+:10AE50001020A2458D8F2A54D4098F24E435011F78
+:10AE6000176BDB0C04232068B058A2463B4150F01E
+:10AE7000061D6890200107B01A7A7D04AFF5D1F65F
+:10AE80007A8352400824E20BBD6DFDF75A7B9FCCBC
+:10AE900039273340FFF6FF6FFFFBC7AF3DEC73F67A
+:10AEA00063EDF5DA6BADBDF61E990C24D20F08F9EF
+:10AEB00016FEE873A644087DD5F774BE4254924846
+:10AEC000487D0E2DA710923E8A84884048410D2D62
+:10AED000E711F2D06D2464CD2464FFEB16FCBECAEA
+:10AEE000CFCAB45DD87239FD3E9ABD7F2C8BB6A314
+:10AEF000EF1F3B2762BBE02C12DA4CCB4984F636BD
+:10AF000092D021FCF82CF036D8C7D2FA4DB7598828
+:10AF10005525E4513A0C9944888BF8EC84365D351C
+:10AF20008AF5F7C82CCB33A2001F2369F36979F5A2
+:10AF3000F492FCD5B4B446667035CE29792648FB28
+:10AF4000F75846E23C68BDC79CB4DEC3EF9792D584
+:10AF5000B4DD86B916A1249BD66B566687B2A3F3DF
+:10AF6000D79E7389C4DB05AD9689F0F4F1674481FF
+:10AF7000E72FA658709CB5350C1FB49E624923A4D8
+:10AF8000B5F380CD4FFB5B5BD97AB8907E7F709430
+:10AF9000C54B31481EEC3C60BF848E1FCCB3784754
+:10AFA000D3DAE95244F038A3E34D2214F009B49EF9
+:10AFB00077874D75F6AF4FFB9D0AF35E43F12E6622
+:10AFC00046DB8D073869BBB59464613AEE2F65EFB7
+:10AFD0002118F797D7240B4112AD77150009F5E634
+:10AFE0005A4884D62352AF8DD071564F79DB369AAA
+:10AFF000D65F5D64814990B55EEDBBD74EA0BF19A9
+:10B00000630E8D02BA5E45BFC33CB21F990DF37E3D
+:10B0100078BA4200FFBF14683D8AE2C662E5870045
+:10B020009FAB8678E03D7DFA62E1B54DB0211C64AE
+:10B03000CD0642F20980807FAB7DA1952380BFF2CF
+:10B040008817CAE95EDADED9BF7D976045BA34CA8F
+:10B05000C1C180BF78F41BC5F1B93A6B891DE841C5
+:10B0600048435AD15842D6039E6050C9AF5EEF8A1A
+:10B07000D65F2930FCAC93894FA0F34BC85342CB29
+:10B08000289E2DD99E39305FA75F2157D2F22A2101
+:10B09000385804BA8C55C86615F9C23E9A96D75EE0
+:10B0A0009AEC05FEAB17C269127CBF867EA75D1EB7
+:10B0B000281A3F07F8B3C9AB203F53FE3904F85EA6
+:10B0C000EB4F26AB55FCDE89ED9DA33C56C40485B1
+:10B0D00087E26500E525C06BCE75F5578D04FA4C07
+:10B0E000B0788042AB85A9EA7C909F249B07C697E5
+:10B0F00027DC80F49307260B4447EF9F03BD299E6E
+:10B100006AD5A29FC3BC9EC8FB286934ADBF26E7A1
+:10B11000C546A0D393F7D8907E4F4EE85C0C72F5ED
+:10B12000D8B9DCF7FD28978A7733EDE7A99C6399B6
+:10B13000840EF8C8CC8F92007FC34635DC49DCF41E
+:10B1400039ABB7968CA3F09186A20599C827C28D1A
+:10B1500014AFC3962A44B5315A7E4BE03BF185B318
+:10B1600059D949E7338CD3B9B5F36D5B31F43797CF
+:10B1700044C6B8F1BD2D3539AA6786E591482AED58
+:10B18000FFB185AFA29C3F7959AA97C9791AF24BB2
+:10B1900006EF271DEA53FD926623C104FA1CD6D19F
+:10B1A0007B03C0352CEBD85C8073FF1BAF0A40B724
+:10B1B000A7C6A5AAA08F92FC9DA48BD27D58F6BBF2
+:10B1C000F7413D97339456948DF5FF82ED4CF03F57
+:10B1D000A9FA3601DEB6093587803EC11C8B97D1AE
+:10B1E0009BE9C13577A586408F0C73FCF17A710419
+:10B1F000F20121A9143E0F4139A91722B691D0EED0
+:10B200005ED66E38090980E76159C1C5A21BEAFB09
+:10B21000852257FF715B4123827C504E077EDDAE55
+:10B2200090F2A21872F03297E77A81CC467E26D24D
+:10B230005F816F862731BED1CA4F013C74DCEDAF10
+:10B2400024FF309BC2F3ABA52372440ACF43D02E18
+:10B2500086DCACE572E0E8204181E275FF6F7F6B30
+:10B2600007BC6DB79032A83F352B6CEBE274057AC2
+:10B270002C24ACFFA6EC8D36D4174216F2DDC28921
+:10B280008ACF3E0EE46FB9E0A7EDD33C4C2FBBBC98
+:10B290004A08F4B22B2D2858283C6A36F16CCC644D
+:10B2A000DD0529FEE6C13F80D125567FCDDAA4D049
+:10B2B0006AFA7D5E361534C01BC595858EBB80B09D
+:10B2C00079CEF3D62F06FA115264017CAEF630FA2D
+:10B2D00034C138742A4DE9AC9FB57793D072E0231E
+:10B2E0000F6B3F0A9A50BA8DCA7BF15F04DA6F3A4E
+:10B2F0006F07720FED12D242360B6DA7D65808C2F7
+:10B3000027450E0940F7B1A92AC0D394E6FDF759A5
+:10B3100000FF6CC9BB917E1E0570D07E9A6A2C3EE0
+:10B32000D417794A33E8E9D53EA6E7357C65F27152
+:10B33000D3BD1181CE9D64523D8978F245EC1E2823
+:10B3400067337832F3D8BCFAE01FAB8496D3C6E9F2
+:10B35000B608817A1A1E4A787F257C1ECEB4D04A60
+:10B3600009E0CE6370D37519E149CF569A410ED2E8
+:10B37000D3587F2AC58F867780CBA1C19547EB83B1
+:10B380001EF62ACDC00A0E0E5F49368367FFEB6FAB
+:10B390007708AC3F942B0787D7C1E74F00DE54AE48
+:10B3A000D7697F2D72441069FDD004A26E64A3A9F1
+:10B3B000527EF4FB2335140FB4E0E4E390F5569489
+:10B3C00007FA2AF82DE583F90DB49C15958FD12B3A
+:10B3D000AD067971F27993062647946D22D02E93AB
+:10B3E000B0B205CA741E25594639235E5D99C2E183
+:10B3F000027EA7FA67D92485F1CFA5CC8E214457C8
+:10B400000FF87C82FAF41AFCAEE0BA9EF153C50044
+:10B41000DFB09AD40211F449C7E3375880AFEE2267
+:10B42000163111F959E8D35F74BC1D4B227698A4EC
+:10B43000A3A32819F09651935CA0001E3BFC5876FC
+:10B4400074D4F8F0094BD378428610DD3899A05FA8
+:10B450003D152D14AFA4460983BE9EA087937ECFD1
+:10B4600078A5E17AA0D7038B5F1D0CF29B6A6A3F37
+:10B47000CE3202E574D82BB4168E7FEC67507F1560
+:10B48000D7270E80783C3E5F81E73027D5B3544FF5
+:10B490006750042BE3A3FA62F5A5EFE6F89D9C7FC5
+:10B4A00092F11981A759AFE8EA5FCAEB0785F3D695
+:10B4B0003B86F53478CCDFCF0816D4532EB0332931
+:10B4C0007E1F269E39B82E7B2DB82E26F0F761EF11
+:10B4D0008102A4679878854CD0B77FB5EAF9E02758
+:10B4E000F012F4AD14463951321C681F52394E80A7
+:10B4F00075AF49AA2983F7E1740701BD7060C6AB37
+:10B5000002E033BDCD3F1CE450B3730BBCE1347893
+:10B51000FFE021FF25289F71EC46CD4E34CF67E830
+:10B5200015CB511F0CF7F776C07AEFAC94BC5702DD
+:10B530007FF9295C4ED4932AF92E85DF1B5C067AAD
+:10B5400056F5D3F220FAACE4CF32F67D556D59EEC4
+:10B550005129DAEFAA51D41EA57A717DE77ADB353D
+:10B560006067D45854E0DBB5DEB76D3E27940B0618
+:10B57000009E5B8B34BB2F22C078E9EFF8D0CE9BC6
+:10B58000E0513CA0B4C65A23833DBAF5A269C6BBBC
+:10B59000E3010E721325E2E0F874A4F3453E8BB785
+:10B5A0009E002C16DD3AB23F6B07AE2F6F904B9189
+:10B5B0002EDABAA2AD23D823D52FF3B91C3DA88625
+:10B5C0006D02EA2B2ABB943EF3B91E7172BD49F598
+:10B5D00030D3737C3D59BB3815D7134D7F826D0D29
+:10B5E0004A623ED7B76B739E49BA86C2E4043D0BEC
+:10B5F0007A298D14C0FA3B1AF40CE8272928C07860
+:10B600004D133C6435AE63467D3ABA86E9C107D333
+:10B6100008F2135D879A61BD6B4A0FA7413F4D3514
+:10B620000704BF6EFDD4D63B574D27013D382F8F01
+:10B63000AD73F3B2D978BF07044D60F0825E35AFC9
+:10B640007BBF98B203956502B7B7CCF8172CCC0E28
+:10B650007C78D6DB88C7B50B1EC12769D880FDA5CD
+:10B66000D9180D56651DC0F76BFC96996077AF979A
+:10B670003A578EA2F0AF9F394F09D2EF6BBCCCEF97
+:10B680005A3D65DE33B0AE592D0A83ABA60CEDD51D
+:10B69000040ED706E81BFD4405FDA2BB6FDBB872A4
+:10B6A00004ED278DFA31820A9542362BFDEE049A7D
+:10B6B00082FEF64718FC5E524062C0FF1F8283F98B
+:10B6C000A1FECE8ED1484F8B07E04DF0F6DAC04F89
+:10B6D00054A91FA6AA00AF6A1F8BF05A3CCBD468AE
+:10B6E000FBDF717FE17658F8C1BE9FF3EE4C90AF5F
+:10B6F00075B731BFCC0CFFDD53431D161C87A05B13
+:10B70000E78A83D7B9A0C140FF784308972B8BC144
+:10B71000755460F47AB8B3E02AF4938AE87BDAD1FE
+:10B72000239D23EC20DFFDECCC840F73D0DE31AD04
+:10B7300033172A0F33E9FBB1D6F0D5C86FDB2CA83D
+:10B74000A708617A4E2016F5DB91B08830B890F5E5
+:10B75000A8FE5E2147E62CA0F557EC7412C097C6F0
+:10B760000FE9BCCFD535940F62CCBB4310E3D19D1C
+:10B77000D9199CEE9D30DEC00BD39F4AB31DECB6A9
+:10B7800070A87E4839F81F35CCDF0D470EA0FE4962
+:10B790009F7E33FA295B9A53E72C00BECAF27901E7
+:10B7A0001D1A3C609FC4F213AFB6D8CEEBBFC7D30F
+:10B7B000C38D952BD0EF6DEC8C3DFF2916E66F877E
+:10B7C000A99EF466C71F3FDFC2ECE8240BE7BB1954
+:10B7D000AFA6E9D7336D5DD5D6D96112098ABAF51E
+:10B7E000F0268E3FF3BA49A406DB18C6E7E83F36D9
+:10B7F0002E6071880D532C185FD1F89CD64B03BC7A
+:10B80000D279A03D47F93004F6DCC3A401E526480F
+:10B81000DB6F26FDE1BE8D582E6A7E93F9FCFAC6D9
+:10B82000E3FEF5ED5C5FADCBB9C70E5DD1F1D28023
+:10B830003F026EA627AB5CCC8E9DB6538EFC80C2B9
+:10B8400051D52CA09D65D9674738CF6CA265DA75B4
+:10B85000C4A560FDD31E1B9603D6CE87BE47CBBDC5
+:10B860003B4582766496C302FC7A8CF32BC9A365B0
+:10B87000B087EDAC58D5BCFF76E8AFACCD4AECB4A0
+:10B88000FFAADDA5D77E8F964B3B640255AA362FC3
+:10B890005386D0F2A2901086724F015DA8002FC986
+:10B8A0004A08FCF61E7767EA8FE8BC4FD6DA884A6A
+:10B8B00041A97375A6DE44F1511EDA5E08EDCA5B3C
+:10B8C00004D088741E9B5F1D0CF3DA2A78C1BFAFC9
+:10B8D000D89260B0078FD1A9FC807E5F42E70972E1
+:10B8E000594A1A0A619DABDABC4E5175F18793B57E
+:10B8F0001E1C472B576DA5E3D076D5CF0B5E986203
+:10B90000B585F8410F9DD96D9FFDB413E6B74C196D
+:10B91000E382793DA040BDD250F18B7615E06B56A5
+:10B920000AE9F7F2A66605E25B012BB903FCDC8AA3
+:10B930002D038C70358A28AF4B926C1B419F13A747
+:10B940002FED86B1FDE97CB296EAD831D17239E8A3
+:10B9500043E4C39072BDAEFE703109F9B5628B68E5
+:10B96000B4B3F9FA1F3CCCE81FDCEBC2B89F46BF6A
+:10B9700025DC5FD6E8B72489D353EACD8F05CF43C2
+:10B98000400F0A4F03E08B3ED770F8DC53C8548851
+:10B99000BBB87DC423C4E06BF3B34126C5C0BAFF76
+:10B9A000BAFCFAA9D260741F1643E4C9B362CED4BC
+:10B9B000E9B4FC3B4BD1660BEA0FAF0A72A4F9D98C
+:10B9C0004F59985CD60F56107F0D33F29F66F109E0
+:10B9D00082EB5EC38C9267C02EA0EDB759500E6902
+:10B9E000FBB1F1DB7B0A271ADA7B0ACBB4F63BB159
+:10B9F000BDEDFCED1B0A271BC72F2CD7DAEF45F84E
+:10BA00009DE787DF73E514E3F8575662FB8095D115
+:10BA1000AB37C98676CD0ABBD727313B2A02EFA5C3
+:10BA2000E4311BA19EA8F103E9F481FDED6C491AF4
+:10BA3000BF9AE8F9A2E00D80C345A545CF17891349
+:10BA40001D067E4CF2251BCAB427CFB1EFF0320C95
+:10BA5000E2B6213CCA1005F5C5D4213684F79E7D97
+:10BA6000762CDF3399C17BCF1027CA19AE2D948E67
+:10BA7000F728FECBF5762BAC4C104A7A53F47F04B2
+:10BA8000F88DBE572DF0DE21921AD4CF5682FAE8F7
+:10BA900081CCFCA7833AFCAC1C46E94BCBA7C1FE8A
+:10BAA0001918C5EB03C34AD28A75E3D40F53666FE6
+:10BAB000CC66EFE73B61BCA21EC04340E91D0376A4
+:10BAC000A5791CEB888986716C196538CE37A6710B
+:10BAD000AC1965A6716CB337F2F77C9C3FC3BCE22E
+:10BAE0008DF3C088C9C6F96494E33856D1349F8C6D
+:10BAF00072D3380E361FFA9E8F6317CF379F91533C
+:10BB00008CF3195E89E3A4888A216E651D5E691A2B
+:10BB1000C789E3C07B1887A433FF46B1F69620FDA2
+:10BB20005FB613B0A715ABFF59E897FCC14E509F05
+:10BB3000A874DC41A0579271BFE03F2CC9389F2FF9
+:10BB40001D94FE4E3D9D839A5D80F6CE420E2209E5
+:10BB5000D5A37F5ECD797441CBF519CBE0D9362DD5
+:10BB6000AD18FCECF52E2FC44FCFB44D53E6C7B043
+:10BB70000B1636C8C7BA0CFCCBF55E01C9AA013F4B
+:10BB80008BDB015AF918D55F84EAAD8FA8FE82E7F6
+:10BB90007199EA69FAFE28D56F44D1C3BB0CDB1D4D
+:10BBA00093181E8F35B175E4CB7587658CF305C985
+:10BBB0003B59741E37F3692C6C4860BE028723C062
+:10BBC000E9D1BBDB1ADA88F4F00D05BB87340EA08F
+:10BBD000B8E2F54600BEA8B824637128D8473F5E96
+:10BBE000B9FD3750ED5DA178D8123ADFD9ADEBE45D
+:10BBF000A1B47C46EEBADDEBD4F5335BFE08E66D0E
+:10BC0000A3FF413F73FCB4AC1BFFD63263F936226D
+:10BC100045CB946E33C4119C1E7C5C352403BD6EF1
+:10BC20004E65F0DC06CFF1F0D983F4BADDC3DA6AF1
+:10BC3000F004EE934904D7A3AE81CCB81D88F5FC7F
+:10BC4000DABA6282EF76D9E62BA2F4BCFD5E11F17E
+:10BC50006886B76B5F82CF42FDAAAEC6CF64F02F75
+:10BC60002F04FF1D4B8DDF49908DA7E155E3835BCA
+:10BC7000664F1D7054576F8EFFAA014775FC726B9B
+:10BC8000D9F586F26D35730CF5EF585A6CF85E1CD9
+:10BC90005C64F83E7FE562437961C3BD86FAA58D99
+:10BCA000CB0CDF17855619BE576C59672857851F6F
+:10BCB00033D40FB4351BBE5BF65D7A1DC863DDEF70
+:10BCC0004402F6D917CE630F817DF5855342BFAA92
+:10BCD0001A788DCAE189DA34E4EF93B52A3ECFB4FD
+:10BCE000E5E2FE58C041E599AEF51BEA0E2D5B3941
+:10BCF00005F408AD4F75F813756F2D0B52DF7D23DA
+:10BD000004A929DF8B8D0A890C003F26B98FAF7BF0
+:10BD100045DDF7AE0B7C6FA40B566EFFEF6257EC60
+:10BD2000F73D42EF18B0EF821F5871FF269EFD408D
+:10BD3000FF869218FE83F6EC86F8864EEFBC2C3216
+:10BD4000BBFA72B1E065913E2B1526EF953B0617C5
+:10BD500040BCA052898CA9896167F78D17A6C00CD9
+:10BD6000827E98BC2C0A0D8DCA2FD26FA441EEAFF3
+:10BD7000B1F8F7817EEEDE2FB2FD81C8C10CD8A7E5
+:10BD8000B95CF4BD0CEF49DB405C1FDFADF50D384D
+:10BD90003A8A90F76B67E2F3F7B54503207EF4C764
+:10BDA000DAD958FEB0D68FCFAEDA327C7E545B83C0
+:10BDB000DF8FD62EC5F2B1DA203E4FD4AEC4E7C92C
+:10BDC000DA06FCDE5DDB88E533B5217C6A72A0D93A
+:10BDD000A32485DB7FDC5EA72B0796CFF23988F49E
+:10BDE000DF9D28D7DE3490EBB3CE2FC7809D7BF646
+:10BDF0007D2B06D1E3E1C9CC6FF1E9E7C3F5BE24A1
+:10BE000044E99FDBFFBBDDC1E863B79099E09FADDC
+:10BE10001AAD1088AB3B5EFE0EDACBF4BD44505F2A
+:10BE200086BCFA7DC4BEFE61CE832E4C27ADFEB12A
+:10BE3000C7FF2B7F5E36D087D1D77150AC61747B42
+:10BE4000DA0B74D3E18FD9653BB93E37E151E27229
+:10BE500067C6E7E9811A3E3B3320DE522516592496
+:10BE6000FAEE6CAB15E775B63D81ED637B522E2A79
+:10BE70009E57B1C5EED1EB87AA7092C7A82F067B5B
+:10BE8000F4FAE26CC7D36E90FB256916CFD15CE063
+:10BE90000F1FE70FC6775AFF55E14C8FD3D08FB1F4
+:10BEA0007CB64198C9F615D5C49B62F807DA734988
+:10BEB0009AE2394AF5C2C92D2313615CEAC7796059
+:10BEC0009CEE5A8F878D9BE6D1F365E55207D6D756
+:10BED000E08BD7EF3F1A3ED8F1FBD8C6624D10A7D2
+:10BEE00089573F2E3DA4CF15F00F48BBFC25AC3B36
+:10BEF0008E2C6DDD91B0ACF51B088B41EBE5F0BEEF
+:10BF0000C5301E6DA76A3E34B48B4F77891CD3E8C9
+:10BF100049F5E4953C3F843233D2D94F7B4CA4FDA4
+:10BF2000F548CE9510E7CD9454D477011888F25394
+:10BF300095AD4BF1AB88EE4E8C7B4ED4E45EBDE507
+:10BF40000F94E53EF93719E319E4CFB477FA5DE6CB
+:10BF50005F179022373819F35A2B66819EFCC4A2D2
+:10BF6000D9030DF930EFD3C482FBF9A7C9DBEE5C2E
+:10BF70009D5D5626F1F8E44AB63E07E97F303F6AF8
+:10BF8000A719D6EBD24663B984DC900AF250B25EB0
+:10BF9000861D5BB208D67BDDBEC96CC983F32E2536
+:10BFA00035F560A7AC96D93EEA3C0F918652B8AA07
+:10BFB000763D990FF66C4062FA5EF39F172533B811
+:10BFC000CB53428A8F7EFFB835F7E6EF11681FAA80
+:10BFD00007BD1674116FAC78CCFC9546F82E04BFE3
+:10BFE000195E42961BE0D0FAD5E010B70831F33461
+:10BFF0007E26093CAEC3E463AD64B45F1FE178D034
+:10C00000CA1B4CE526537D8D4F64CE279992FF11B4
+:10C01000D03F55B6DE42B4D308E58FEC683D255AD3
+:10C020006FC3F9EA59A19E88F59AA409F1EBD9A347
+:10C03000FD35C7EAAF6AD7B61783949FCA5F78D435
+:10C040000D41DF4FA48654887F556EBEDF0D783AD0
+:10C050002105DD40EF4F4262CCB8E07B7DF8F2393C
+:10C0600005F02390B529DE9F7BF05AD0D75F6E96FE
+:10C07000312F26B0C51AB1523EAE6E5D340BE2F7D9
+:10C08000B47C84951FF814F60D036D467A963FFB39
+:10C09000682AC489282699BD4D226877546FFA53BF
+:10C0A00021E8F100E9453E34B783F1CF25A3DC1741
+:10C0B0002B89FDBF6BF90A012E6781D6073F85BC2E
+:10C0C0008480897FCAFAD6932E05E2081D922B053B
+:10C0D000FDF2EF92EF821ED0F04142CC9EA8DBBA77
+:10C0E00061DC110A4FF7A67F730B06BF9BF1E1D904
+:10C0F000F0FC5FBDA4C6D73367B83F146D17C27696
+:10C100006A1BB37F483B7B56CA1137D89B95CDB28B
+:10C11000977228A9DCF6F4338F839FF68115FDB45E
+:10C120008A6DBF7977322D576C975366B1E93885A0
+:10C13000D4285D02F47F4BC747E950FEEBDF28EAC5
+:10C1400058F6FEA7C9517A546CDFAF90B1FDF137B4
+:10C150002DBC5FE972C6A04BF84821D82B755BBF98
+:10C1600052C0EFFA649F400665F66F5FD6FC1B5C19
+:10C170000F014F48474EA73EBAF5A357E4DA97F2AE
+:10C18000B09E07F4643C7A3DC7F572D52E174982FC
+:10C19000F8E7EFADA15940C7E7EF74C33C8E4B35CC
+:10C1A0008CAF9FBC3F15F6FFCAE460AA079FEC7DE9
+:10C1B000D9537723BF950A35A96C1FD33798C7CBBE
+:10C1C00007C3FC1636FD08E75742FCC877654F8A5F
+:10C1D00045101FFE422233B7C7908B6B64B6FF74C5
+:10C1E0007CA31592FCC871B0F3C1BE7E5BC4382B32
+:10C1F000218B711FEC6E2D8E4B9660F90BBE2F3587
+:10C200004AB668FEA1CDC0AF9B1EE804FA9C1CE6AE
+:10C210001B0470523C0439BE04D8EF170FCF18C46A
+:10C22000E8C3F20DB01DD5FFD3E03DD4EF94719F6C
+:10C2300050D78EEB4B36FE5D7C7C0AB703D6B3E35A
+:10C24000A96CBFD23CBFA57C7EF4AF93E8F84B2726
+:10C25000DF4CDE37AD62F2ADC97BE8FA99F0FDF351
+:10C260007798FC403B583F285C9141F87DFF4D0298
+:10C27000EA032B89C492EB4D32976BE3F700955399
+:10C28000880B50B825C86788F209ED3F19F18F7EF9
+:10C2900049C97ADA4E679F05603CACA744DFEBD60C
+:10C2A0008F52AE0766CA46F9274D032FCA5EAC947B
+:10C2B00049104CCBCA0FACE877576E938B60DEA762
+:10C2C0005A0EBEFB63CAD7A7C29A9C1AF5A7594E4D
+:10C2D000CB766C16803FCD727AAA8CAED6B1E49440
+:10C2E000BE8F29A7655DFF57F4A786B780096F54F5
+:10C2F0000F0E4FB2C4C79F590FBA6435A61EA47F54
+:10C30000EF90FCFE7CA7F19BC667D4421B0EFABBE4
+:10C310008F1F357EEBE3478DDFCCF334E2CDFC7D20
+:10C3200032186A14AEA2DD32FA2595ED6CFF86B69E
+:10C330007B75681EE2C787CB17697875688ABE1C53
+:10C340003295C3A6FA3E53B9C854DF6F2AD718EA0C
+:10C3500057B61D54589251C450CFBAF471F2710CB3
+:10C36000FB5E5B6702AD9F2A41E087F45E05F49CAB
+:10C37000BC9C9A66103FDB2BA2BFD5A3F6BA93E90B
+:10C38000FBFBEDCC8FEDF1F072122BF70E54EA416E
+:10C39000CF69EF7BED2CCED953D4EB4ED2F9F747D2
+:10C3A000DA4537EC077785583E6A7F78EA506EBAEF
+:10C3B00048BCEF2C2E384374662C05FFAD41F48247
+:10C3C0006BB860D92D6ED877EB691F79DD6CFA7E7A
+:10C3D000E12111CC67D2E3708F03B848D0270DCE8E
+:10C3E000E7F913F4EF0409FE720AE44DB433FB7A63
+:10C3F000C11A933DECBC4BC1FCB2F5BAB8968EFFA6
+:10C40000CB793F654DC6EFE5640DF25FB9491EFC7F
+:10C41000DC1F38ACC9430EC961FBDB84F9B15CEFAA
+:10C42000CE10B3AF9B4DF1DED32162DEECD9769115
+:10C43000D4C33C5B04DCE724C1812857D5A417F59D
+:10C440009D86976E901B25BE3EEADEF91FF9F70127
+:10C450007FBCF887714FD067F78B1F8CD903E55DE0
+:10C46000EF65FC81F4AF3F6DDFD7B88FD8B3CF8ACB
+:10C4700071AE9E7DAF65DC07E597AC18E7EA596EB3
+:10C48000C57D94E03E5768347C1FC6FC81BABD5F11
+:10C490008D6379922B904E7F96993F72B6FDBF3E89
+:10C4A00084FC91B3ED74566017EC4B40B909BC6441
+:10C4B00047FFBB67EF57F97EE73F6E3ED50AF12392
+:10C4C000FFB9C8EC1DC0AF492C1E1CD833E969C8A0
+:10C4D0006FAE6ADDAF409C7DDACB7F19077AB26719
+:10C4E00007B377CEC85D4FC17E9855F974B94CF14A
+:10C4F0007C06846708214F2BE3A705B363E185E140
+:10C50000A187E201E645F15206FA3D1E3E32947FD4
+:10C51000567C7C7A3BD363DFC53CFB285E041F7BE3
+:10C52000EF0AD9049C3F7BBFEFAB71A0674E8597A4
+:10C53000A13D72A1795FA1B07D96FF39F316221754
+:10C5400033EFB9FFB4F466FCFF11ACAF03FBCB4192
+:10C550007F3EDF750F969F777911DE8B94FF9FFEEC
+:10C560004FA3FB0E4A77F785E9FEC43FEDBC2F448D
+:10C57000F7439CEE2E0FEC2FF7ECFD0BC64DB5F9F3
+:10C580005F68DE2FFD3F3A6FCD5E7FCDA2BE934345
+:10C59000EB1F220DEF8C11207FF1E0613802562055
+:10C5A00090A258F6C84985C53F0A049627489204C8
+:10C5B000EEDF31BF6828B71386DE558276C6D0F429
+:10C5C000B5681F10495D0FFB71AF65CCF7B27CB049
+:10C5D000F1780EE535CF15BC6CF40F9F10880FF283
+:10C5E000868766FCB003ECD5F47411ED59FA443B30
+:10C5F000F615F74CF6BE5231F84557115D99CEABA2
+:10C6000030C5E8FF4CE7FDCD2023DEC9A1F0CFB057
+:10C61000C99E1045D15553FD12CCE7AAC10269D07D
+:10C62000ED074D37F949AF825FAB8B97FDADF84B06
+:10C63000B7323FB24018B1BE08F0374CC478E005BD
+:10C64000F14758FED76B9E1C96D72A7919FE92ABFC
+:10C65000BC184FE57E338405C05E919CF59D20B7E4
+:10C6600012A17E2F831FFD65CDEF8D8767C2FD6808
+:10C67000890FA9E15D4A17315F55D71FE243A3C770
+:10C68000DF4A078D7E7F2F3DCE98E891FEB94702A5
+:10C69000F99CC6EDFFE99F778A584EF74AB81FC547
+:10C6A000EDFFA9CE2409ECFF2BA4C322C865A9ADD8
+:10C6B000ED6A88D3DBBC02F2F525DD16F46F6C79E8
+:10C6C00002E23DAB51C2F2618B670218DAD77E6F8E
+:10C6D000D7A97B09C4877D0A1ADEA488C5E7FFFCB9
+:10C6E000EDB753B4F31AF89D906BA8FFB5A0894439
+:10C6F0001C144F0B25124C4C86F8AE403E32C477CA
+:10C700008D65F8FB7E6AB49F0BD58FA747FED1CF0E
+:10C710005D546F7D449963373C715F85B284CE3F31
+:10C72000FE6E3BC357E075121A8171059F58A4DB5A
+:10C73000377BD0CAF4C7AE3FEEC885B8D8D49EECDC
+:10C7400044A64F47A15F10E07EC159A22642FEC118
+:10C75000D9F69189B82FD821BAFC31E2325BB9FF02
+:10C76000FCAF904F419F3D9B48039CC3E821BD18FF
+:10C770008F0D6EB2C5DCDFBDC7AAC59B38DDE89F53
+:10C78000A89D3752315F2498A8A75BF7AC4FA471DE
+:10C79000FDE9007F1FE9F64BFE5EFC82BF0EF8DD6F
+:10C7A0006AEF2A8C751E6C25C7DFB507BEC638E652
+:10C7B00065EDCD16E0DFCB36590CFB8D412BF7BB79
+:10C7C000C693F100D7B507ECAE3CA04B87E885FCDB
+:10C7D000C140FBA78A3FC6BE95199FD03FC4C5F78D
+:10C7E00059599C7F8F1C9E0F78DD73DA86F939BB0F
+:10C7F00095868A58705E62677A6E2109DF392EF35A
+:10C800009F0FBF537B9C9102F03337111EC730F34B
+:10C810001F413E3EBB85E0F950F04B412F9C6D61BE
+:10C82000E780294AD6823F4DE5FD07FAB8CC256D51
+:10C83000DBFF15EC80EA76C103A9B3D5529702F16C
+:10C84000D6405B9208EB6E8EAAE5557AC6DEA493BD
+:10C850008B7D56966F7C70F29E5B61DCCFBA1502C1
+:10C86000F688EF955E37ACDB9FB5E726C6CA9BD747
+:10C870009EBFAE25574F97A01F827837F343768B24
+:10C88000C350FE9EE81F02F275ADB5EB2E6F0CFA99
+:10C89000F96D8CCF2E5ABF85FE3FD36FEF68FACD6E
+:10C8A0002F16E9E428CBD64FBF0D8AA5DF9608EAFC
+:10C8B00020C0FB92BD2307015D971C9207C6D26F73
+:10C8C000DB6AD97EDE0B3C1FB6A795EAB7CB75FABB
+:10C8D000ADD5867971E676C9360B5F172FA0DF429A
+:10C8E000FF3DF2B70DF45B8CF98EB631BDA1E9B70F
+:10C8F00071ED4750BF8D6BB518F246D36D17D26FEF
+:10C90000C2C09BC01EEE90BD0931F8671BB7BF5F68
+:10C91000E07978300EE8B95B6D6C7FF362F55CB658
+:10C920009DD1FB827AEEBF09CF9A9E5BB2533BE763
+:10C9300068E643A6E796ECA67A4E007E647A6EC956
+:10C940005E768F8359BF65F5D36F04EB574758FB6D
+:10C95000405BE686B9B4BFF13ED96BA3F5C747F596
+:10C96000DD04BDBEBBD5C6EE5DE8A7EF3A2E4EDFB7
+:10C97000EDE4FA8EEAB111A05FCDFCE16D37E61D62
+:10C98000EF9974BCE5D7202F6F88B86F78989F4BCC
+:10C990007B73D2F13CE0AF161BD3BF759CFFCED4A6
+:10C9A00006B1FF69AFB0F95539593E72752BB30F17
+:10C9B000AB5B84904AFF5938F96B05E05FB45720B0
+:10C9C0008368F97A2BAB4F9ED5F6BDC8AC1C1D3FD2
+:10C9D0002C98588171FB0512B1415CBEC259F8090F
+:10C9E000D8BF1513591CBF82BF5F74A8AB1EE2D914
+:10C9F0008B1E1370DF93F07C002DBFB1B47D19C680
+:10CA00006BCD79019A3E5F1432BEAF30E53336F319
+:10CA1000795E2F76215EC85B62CCBC8466333E3A79
+:10CA2000383E3689B86EF6E183E247CDEC8F0F4A87
+:10CA3000D15939A9D1F92F7A83CE2B2F3A2F0D1F37
+:10CA4000E6F96971E70ADE2EDE7C35FCF59BAF86E0
+:10CA50004FD3BC9F06BD010A2187E4425E0CE5036B
+:10CA6000D41BC1DF8A787EBF68EAE8417A3DBC9575
+:10CA7000EBF3DC86A9D30613C017A901BE29695CB4
+:10CA8000FCEA603AEF09EFABE36179FCDE64AB1FCF
+:10CA9000F647B7DA7B51AF697CF50DE7AB77391E06
+:10CAA000F70CA9C173AA8136C1037645206247FC01
+:10CAB0000528FEE0FC4A809F5F0C50FE02793AF8A0
+:10CAC000D8970C5F7B0515E2E385DAFA03F8A7F542
+:10CAD00073DB19FE032101F19F477A717FA4BA51DC
+:10CAE000F04668FDEAB6C598F7A0E95BFAE7D4D34B
+:10CAF00043C78F522C7EC44ABAF5AF82D7BBD6DA71
+:10CB0000F02EF0E7B5CFCAA459C79F59F4BF6F63A1
+:10CB1000D049C3E785F8F21CC7D336C0A313F0D5BC
+:10CB2000CBECA7C8D7788E46FB1E9082063C4E7B86
+:10CB3000FCDC79F13441C313F029E8A9F66211CA8B
+:10CB4000256D021990D97F9EB03FA997DB457B8F59
+:10CB5000B0FE9F14F0DE1233DF6AF3EEC7B771F850
+:10CB600015CEA5815F74B17CFB8D896FDFB4F7BEF4
+:10CB70009E0B7CBB5760F183F624C3FEE2103B5B47
+:10CB8000FFB7DA297FC3BED621D9BB51ED2FDF090C
+:10CB90007CFD02BB5F7F2EE9529808E43D6EB161D7
+:10CBA0001E19C23182D9957ABDBACD4E06DE9417D0
+:10CBB000BFFFC1BCFF78768D561E0BE341BE571BED
+:10CBC0001D2F2B3A9E59AF6B7EFE85E635E6EF9C16
+:10CBD000575F1E26E9C47DA74CC9FFB0559707775C
+:10CBE00033CF33A210A07DA5AB976D3B4F3D92E6AE
+:10CBF000C1F34F777A343E63F9EE453C8F7D86383A
+:10CC0000E53D583F3FF3B17DBE3C0BF9DD14D0CF7D
+:10CC100005329EE3FBEC7519E3B59F4D67799CD710
+:10CC2000BD71508238CD75A09C283EAE9B20A0BF20
+:10CC300002C7B060DF6C17B56F7C63703EB9708E51
+:10CC40002B6753C334387F3C7E4BA80E9EDE69BDF4
+:10CC5000296F021EA78A04F0D8E91B300DEE4FBAE7
+:10CC6000F34F04EF0FA1EB2CB61FDF410642BDC905
+:10CC7000BE81E80E4C6A5D3F0DE2A3D71F743AE116
+:10CC80007E96AC260BF519A2F89B4C4275B0DF3EA0
+:10CC9000E9A8EF4680B78CDA0B10772E6B6FAE7376
+:10CCA00043B949F0AAB4FF40D05FE8A6F3D8D6F85C
+:10CCB00069E177401E693DE826D0C4EA0536C1C562
+:10CCC00043F07E1DE6D9946C12F0E0D7B690406C2C
+:10CCD000ACDF908DF6BBAD89B6CF837582B6877E0B
+:10CCE000377DFACE8D20EFAF8BAC7D0BDBA72EA16D
+:10CCF000ED54E0DB4D8BB1BF454D0249A3FD95B529
+:10CD0000B075A0EC75D90BDF5BF73F86EBD82C3AFA
+:10CD1000DEE04CD0FB91E95026B98207CFA1548EBA
+:10CD200041BAF5703927534633FD21F032F71B34F1
+:10CD3000BBE95D3BCBF72DF12E5306D07EDE9C3850
+:10CD40003013D202026D9FE2FEF3518A673FEDF28B
+:10CD500030CFDB3838F163A54BB70E7D6667F75BE4
+:10CD60002D689B8AF90C0B4911E6335C3B89D96B22
+:10CD70006F5D610FC115076FC9BDE9F0FEE0155683
+:10CD8000B47FCF6C93918FCE0CEBC2F8F4F12619DF
+:10CD9000CF0DD735B1FBB98EB7B0755C7C92EDEB9A
+:10CDA00097BA142C1F6CBAB110D6B7E39BD879C7C9
+:10CDB000694FCE50A05CDA2C78D9FD454C3F6AFE15
+:10CDC0005B8987E52368FAAF8ACFBB5FDEA249DFC4
+:10CDD0005569EB8D49DF55C1BEB21B9EC6F701E216
+:10CDE000647A10EC7EA07BE46BE4DFEAD765027620
+:10CDF000BFF0717721E663ED15309E3FA95DF0C16C
+:10CE0000BE7ED9FBD610DAABA1E23B7E027AFC03F0
+:10CE10002B1154C86BA778A7FA61A2B5F78FBFA0F2
+:10CE2000EF3F396C834C18CA27C588672DFF336FD5
+:10CE300033CB63C93BBC3E15CE5B92E90350DF9612
+:10CE4000368AC4AFD31B9F08BE1B7FCCF432DE4FA3
+:10CE5000A1D12F4F692881756CA483E92575B30C86
+:10CE60003922E4108F93507B1ACFDF2EDABD2E5576
+:10CE7000A1F5EA79FEC7A2BDEB5245FABE0ED62F48
+:10CE80005A7F91C2FA5FB44FF034EBFAD7DA6BFDF8
+:10CE900069FD28BB8DFD8CDCCBCB17D98F0687367F
+:10CEA0007E3C7B7CE2BF9F5B0FF7C54C7C4BC4A4F0
+:10CEB000E3891FCF1AA9DFEFD09E5AFC35FF1D0B67
+:10CEC000F1E9F036F18F0EE2D3F145EB042ADF945D
+:10CED0006ED7B4092100A575C211A52A0FCB1E90EB
+:10CEE000E76A1EA7AD9ECEF6AD5A730EAF00F99E4F
+:10CEF0009527201F90A05F19908276900AF1F1D2B9
+:10CF00003CD6BE94B607B96B7D8CC921D5072AE8FB
+:10CF10008BEAA67585587F93A042FFADCDC5B8DEDC
+:10CF2000974D14097EDF7404ED8FB2B6232920AF2C
+:10CF3000543ED7C3FA5B3DC58AF7796972A7C9F138
+:10CF40005B32BFAFC9E6190B79FDF7015031E457E9
+:10CF50007C9D303FB54546390B4C6472F9D636118D
+:10CF6000E5F9E015B7A01C9ED92CC491E3690A9C91
+:10CF70004B3E1E62DFFBE478ABC0E598E987E34EE9
+:10CF800026D7D3E03BC8F14E81FB83CC1E34CBB116
+:10CF900026971792DF8A2D26798E23B79D52D74D7B
+:10CFA00030EE9D57D811EE69DFDFFDEE9DA87F645E
+:10CFB000CCFB98F6FD7B5341DF95482C5F49C3635A
+:10CFC00095C4F2D9FAC1B17E9932F8A2E031C2F12A
+:10CFD00084DD15D51F22F039BB872BB849463E3773
+:10CFE000CBE1DF2B3FFF28793EC4F9478347DCCBF9
+:10CFF000DA43FE5884E2E9B596A7314FF5F473475A
+:10D00000AE053C57ECA17C4BE77BA6C5C5EF7B0981
+:10D01000E13A53DE2A621E389122F937BAF472C916
+:10D02000F2902A5E70217F94EF60F9A4E52F7E3C98
+:10D030000EF34496F7627E55F0396E6F06BBC6015B
+:10D040005F974B2C1FCA2CE7373998FDD9BD3B6140
+:10D0500036CC43D8C2CEE997876F91810FB57A3F1E
+:10D0600074C85A3DDCBF0C52BE85FD75804F7FEE03
+:10D070005CCB83EADECAE4BEBC4D467FA97C4B3361
+:10D08000C6B1035B3EC53CF7692F6CC3F841A04DA8
+:10D0900034E63D6E112356CCCB148F58D93A65C86F
+:10D0A0003FAC6EADC2FDB6EA30CFEF33E5BF55BC45
+:10D0B000B0F7C520454DC5AF9F75831E38D9B9D986
+:10D0C0000DF8A4FD61DEE0F73F970C7951F1F37B99
+:10D0D0007DC67CC2F0AA98F98427E11F94C1EF7540
+:10D0E000707ED5F230B70CE079DA91FCA218F1FB32
+:10D0F000BE733BDBBE780AF2DCBB779C7A0AE0AEFB
+:10D10000FCEB674F413E13D967C77529F0DCEF3060
+:10D110004F586BF70B07F7F3B73E8BF9D5673EB067
+:10D12000A29F7366EFF10CC85F3BB3FDEB5488C759
+:10D13000DDB57706C62BEFDA396D1089A1DFB5278B
+:10D14000F065E822F2BBCD7438D87A10F3AE4EBF4A
+:10D150006F457DD697171AAE6279B62ACF076D89CB
+:10D160009D47AFE53156B7DE78DD15A09F5B993D51
+:10D17000D797D778A13CD077283D2FBF08BAB5F014
+:10D180003C5F13DD4EC33F287DC226BA7DD1BAF085
+:10D19000578FC3B7D60171F3402317812F2D4FFF4F
+:10D1A000E70EDF1E079CFBDB91104C63F40ACD12E7
+:10D1B000C0DEFB2203CE359C907B31DFA377AFD559
+:10D1C00003F98CE57BDF43F938B3F330C65509CF5B
+:10D1D000933F43FAFE585EB3C0E7B7C9C5F247397B
+:10D1E000DE21BF5475E37B9E47CAF856CB2F8D973F
+:10D1F00057DAEB18C1E2D0FCDC4015F593F8BD59C5
+:10D200007DF9A6C244A0D311439EAE366F737F1E34
+:10D21000AE37A3F9D1B1F376B57CC1289DD83AA237
+:10D22000E53F9F69E679D3F47DFA78C88363EB75AF
+:10D230002024BC4762C8A3961F7DCA61CA8B0E5DBD
+:10D240005C5EF485E0FDDFC5C7870E16AFD6F0D271
+:10D25000FDE7D8FA5849607627F54FE504DC1760FA
+:10D26000FEE91DDC3FD5F0A5C15B1F667643F716CE
+:10D27000E61F98E5B93ACE7D49297C9CEAB6FDE3E4
+:10D2800040EF741FD8CDF98DF17375CB1196774BA4
+:10D29000F57348AF9FF9FD12E6FE32787F81F6D82C
+:10D2A000FD055A3E8DD9DF49C9770BC07FB293D9AE
+:10D2B0004927C3E2CC58F7DBD8126443FE40BD8B4C
+:10D2C000DD9721BA1D681FDDE59AF87E620A3C15DC
+:10D2D000CCEBA95BC6F3807EE6C57B45EB5C5713C0
+:10D2E00080E77EC08F2ECE207BFC04EC3439AD2845
+:10D2F0004F54A3F0F6D123C542427AFA4B9174D031
+:10D30000E71FE61C97A1BFFF34C547FE5322F583F4
+:10D31000285CFF1914BCCBD4F876B556F6FF54340C
+:10D32000C433AAADBD1F827D4E5EB6E37EB8B8CFD2
+:10D330001EC4F8D853EC5E8D833BBF7A06EFE5F947
+:10D34000959570BB50007D50CAE314C7777EF5D425
+:10D350007F811D098DE9F8A54FD1FA603FB724A060
+:10D36000BDDFB323711CC4014A5FBEEF5AD017A5BD
+:10D37000A0FBC0CE7C6150A88EF6776C202B1FDB03
+:10D38000360CCF0554EC70613EE1C19DBBAA41DF74
+:10D390009F79218180BE3F2D77FD15CA813D89A4EB
+:10D3A0005945BB4FD5AFAB8B88A4EAEDB90A281B12
+:10D3B000F25B08E6B760FC8DF273455B229EFFD0FE
+:10D3C000D5E3F21C1CC2EF891A027247ED46D598CC
+:10D3D000F7CCBE2F4860FA2B60EDBD87DD87C0EA31
+:10D3E0000794DE12566E18C2E4B613EB2FD6F895EA
+:10D3F0007FEFDF2FAB1F4860F180683FAC7DB595B4
+:10D40000DDAF61A6EF4F13047E1EF72F97C4BA7FDE
+:10D410002206FCEC5E2E8104E1FE55B2DD8EF7F1B2
+:10D42000542A913190AFFEA2C2F63F2ADD9131908D
+:10D43000AFBE87EBBF4A072DD3F743381C501FCA36
+:10D44000C4D6F53CDEEBB4CB8EF7E155BDECF2A1D2
+:10D450009FF0E257C79EC8837CB504CC93AE7AF99F
+:10D460005F90FE55D6C8EDC0FFBDDBAD783F69F7D4
+:10D47000F64319603774CB918CE4F3ECEB5485AD33
+:10D48000867D6A6D1E276B974E8673BCDA39C3F2B0
+:10D4900038FAE28D0496D7D19CE0FB15D373C6FB16
+:10D4A000654ED6CE36DC9B586E8BADC75A402FE802
+:10D4B000E27862F45C610BF47B9A74D50FA124A925
+:10D4C000127A717FBC7C4B663AF8BB07EC97E0BEE2
+:10D4D000D50159457F109E7A7D7CA2D69B2BE179A0
+:10D4E000FAAC5C89C2D1D3FC69C91002F981F6D9C2
+:10D4F000B1F4D3DE8404E4A7729B35E6F9CDDF7284
+:10D500007EDB06F236818DE7CD8E8E7B400E2900C4
+:10D51000C714A78AF329A77E00BB276A4EAEFEDC9C
+:10D52000F622A901EB51F9427C2C22EB953C677F56
+:10D53000BDB268695EAE948B0AEB9B3E7E13A3740A
+:10D5400022C114B493244E43B27EB021DF5F928B8C
+:10D550006C802F851479241148DD8072EA20617C6B
+:10D560003AA919C2D6A11A02F1F1137C7FD62AA9D1
+:10D570000FE37D331D22EAF30BE1EDBD0437C26DED
+:10D58000956A8817ED8D591EB0C784A09F7C4BF912
+:10D59000A1AE76662E3B174E7C90EFE6260C3EB78A
+:10D5A000E7D5AFC13EA07CC6EEB1FA3E09D5D1F1B8
+:10D5B000E09831C6FF0AD87DF6E6F1FECCE940825C
+:10D5C000FB0DF79DC35FAF767F1EF8EB897F9D084B
+:10D5D000FB314E0F8980BD94E024918471704F9E81
+:10D5E00074522FBF6EC2CA23283B835EF34C317E38
+:10D5F00037F335F14A9FF7E94511DB7F6E6AFFF992
+:10D60000F9DA6BF808D8367A8FE646F1E2E073086B
+:10D610001678CF75013EC6B9BD754047A5F7C3FB67
+:10D62000001FE39CCC1F4C69247A7F2DD7C9F4D509
+:10D630000A7EFF34FD2B72EAFA231E1BC647577180
+:10D64000BCF7D5D7E226FDEADB25C06BBFFAF6783A
+:10D65000F51DB1EBBBE2C193101B9EA438FD07631F
+:10D66000D7AF7EF9BD37232ABC647A0382F3FCDC92
+:10D6700072AE13FCABC40F538B1957B0FD0013DD12
+:10D680001CC07F941F1CA374EFE1FFB275F41B1143
+:10D6900083FE24827C57CCE1A165E7600ADF8F39E5
+:10D6A000B8D337B1FDCAB977B138D18F6DA5E8EFDE
+:10D6B0001EE1F701CD6D647EF5DCA56C1F9194B180
+:10D6C000733E1EFA1F8C771B7442E97D5B83108AC0
+:10D6D00064C2BD3526FBB5EF7E9C450AD42F36C506
+:10D6E0005D347ED2CE23CDE7F67526E7CF85A4D76D
+:10D6F00005726F3EF7FE0AD76B9ADE0FAE235970A4
+:10D700006E5FB438BCB03F2AF273A6C4CDEEF323EB
+:10D71000BE61EC7E392D8F2B4B4D84F58D84F97BCA
+:10D72000BECFB2E42A7590FE9C9674CE81F783D466
+:10D73000C9DE34D083F2396AD751574D393782A8C0
+:10D74000BA7364D49E43E1963DECBE44C953444A47
+:10D75000C10EE4F7039094ABFBECAEB7281E96AC79
+:10D7600053F1DCEA4227B3337FE12ABAD33901EC23
+:10D77000CB895E76CFAD918EC19D6C7E7530BFCC6E
+:10D78000FE70D7295E2FDA9D57538B01E3385EFC7C
+:10D790007D07D1AABEA7823CFE9BCC7EAFA01F1EF8
+:10D7A00018FDCEA624E3BDEC0BDCAB3F043E5DC30D
+:10D7B000EF235C599B85CFD5B5696877D6D77AF1C9
+:10D7C000A9E1C5E66DC07BDF6CA3587F368F9FD97A
+:10D7D00015D496817C0AC9531381B22DBD8680BDB4
+:10D7E0006BEFC34F03E247E92BFBB16CF5B0DF8D64
+:10D7F000901B67219E697B524ABF2F71F91F073921
+:10D80000B1AB9719EE91B3A68D37DD3768C29BC6D1
+:10D810001FDB18FED60A8C3FCCF85B2B77AAB0AF83
+:10D82000BCF6AABE7B67107FD4BC67F8FB2DDB6714
+:10D830008B8B3F4F32DAAF0BF2EB6FAFA3AF1EE42F
+:10D84000FB8B0FD44E447CADE2F748DE5FEBC3A701
+:10D8500008F8A3F3B3660709DC8FCE7E1B823E9DDA
+:10D86000453EB87F167817F0273A193EAD6935B8AE
+:10D87000BF6673327C89CE20E24576327C894EC603
+:10D880006F0A2F4B80BF5C6C8FEF29FE0E007FD993
+:10D89000D2271BF0A5A4145C1CFE1EA3F8A370A441
+:10D8A00070F932E3214561F7536A7215CF8E7B948C
+:10D8B000CE1FD6ED0DB5049F03E3F88B235C6CDD22
+:10D8C0004CB1D4EC97011FC984AF2741929E4F58A9
+:10D8D000EA21FCA505890A6581C1411A8619EE95E0
+:10D8E000143D92E95E367503F0C1FA43B205EEA32A
+:10D8F00013975E6D380F2ACEF625A9884F3FDED3E9
+:10D90000FC60AD8AF45B0774847B40B9FF753FA768
+:10D91000E703FC1ECA555C3ED672797998CB491D47
+:10D92000BF3779CD4C9667959263E1F79545883E70
+:10D930008F29C91B260A850B6D6A159F78CF22791E
+:10D94000DF1A1A4DDB2564131FF049D2FBF786D886
+:10D950007D8D4583C10E4AD2EE5F9CA226CDC18348
+:10D96000B01189F91D5415A21FD36989754F559DB2
+:10D97000F7800DE2A1F1E049F0FA32EFA7E3253498
+:10D98000BAD07E1FE02F9AB390969D8D0918FF4B59
+:10D99000E0BFCFE2A47097EAE81DEF1EEA8DAEABC0
+:10D9A000125D949E1E80913E1F691C89BFCBF2A818
+:10D9B0005C84BFE3F2285F4FB57BCEB576DF70FDA8
+:10D9C000E8CEBBCCE0B7AE977DD8CE33C528FFEB11
+:10D9D000B9BE4D9E6EE4734DDF1EEDD3B7FE110050
+:10D9E0004FEAB9E9A8C7526E88AD77EB6405EF2D11
+:10D9F000AF1BCBE43C58ACB0FB4BFBEB018C539F13
+:10DA0000F58FD9087A54E3ABE584E99D20717871EC
+:10DA10001DE2F7DB6876F04AB80790EB57788AA3E7
+:10DA2000D8EF0FA4CE65F7F9AEE1F7583D44F98A77
+:10DA3000E0BDA75E7C5EED62FB13CB6DE3F13EB50E
+:10DA40003AA705F584F48135042687B47F9207E26E
+:10DA50000592ECEDF441BCCF2585E1DEDC3A671E92
+:10DA6000DEFB2E24E57980FE5FBA160C3F5F3E1D7B
+:10DA70009D28DE97E94929221F65E36E009E47969F
+:10DA80003D3710881B6E48A9B103DE26B9585CBF2C
+:10DA9000B1381FF148F17B9D6B60B49F41B3AFEE8D
+:10DAA000BB070BBADD10E75CF3AD2E662F91F420B7
+:10DAB00019A593F346ED774ED420C9D2C9FBF2D114
+:10DAC0008504F687FACB791C3DB699E9B115426C0D
+:10DAD0003DA6D9999A1E934DFA417BD60F9F69387E
+:10DAE000A7A5A4788177E119B478C1BE7BB1FED631
+:10DAF00024C4430DE081A45DDDE7BFFE6004D88F40
+:10DB0000F931F9CDACBF16F4ADE7BE54A0D3095935
+:10DB10001D3407F8E950ECF57CEA23973E0C7CB005
+:10DB2000E0B7A2A0DF4F293DB712D7D3927313F10C
+:10DB300059D63813F99E40145CE7871D6FBADB0D88
+:10DB4000701D6FE479004D7208F2338E37DE8DF769
+:10DB500095409EB7A8DBDF27792ADA97DA3D63C7BD
+:10DB60004377BAF5FBBB25BFB0FBC06E8DC75F2501
+:10DB70004DB1FD7A5843217E4A01CC027B98DA37B9
+:10DB8000BD11B07F365ABD41122D071FB1C7CC4F12
+:10DB90005CE29AF128E07D89CBF724C83971B27B29
+:10DBA00041E3F3391BF7186C02C37ED3E33C4F53B8
+:10DBB000F2BBF5F7BBF5DDC7C9E324C416E7BB43E9
+:10DBC000FB7D8338DFDD2C9F8378627FD7FC8484E4
+:10DBD000A89FD006F3A86A3C55FF01E289FB091C07
+:10DBE000EE133283FBC43356F63B3726BE38C1F3FF
+:10DBF0004716090CAF1A7F9FE8B377FC780F8D9911
+:10DC0000FF848D976E9844FBFDAC43C6385C25E5D8
+:10DC10001FE01B61E324CC5F171E99F430E4257DDF
+:10DC2000FEBA88DFCBCFD9F07BF7CFBC1BE6429C96
+:10DC3000E70D19EFEBFEBC6346228BF318E3D00B24
+:10DC4000DD6C9D3FC9E5BEE4DC6AE4CF3EFE68586A
+:10DC5000A8805C959C7B08ED99922D02DE13498289
+:10DC6000BDAF4E95381F4E86F6A70B9703BEA7345F
+:10DC7000E0FE46E966AB77B5D09FCE275DAAE15EB0
+:10DC8000F5D2AE35D82FA1F6548A6EBFFB04CF0370
+:10DC90002E3DC7EE07249E204903BEE77A27CABF60
+:10DCA000C67B5FBBEDB1E3ECDF707BA6E4DC648395
+:10DCB000DF109DDFF7997CF2F5BCB46B2283AB6F6C
+:10DCC0003E1B26C59A4F741E53B07D7752ECF1333C
+:10DCD000399E8FD596C1C90D52A6B07A250D772BE6
+:10DCE000A04F4A9A929205DDBC4A1B2B0C7918A5CD
+:10DCF0004DC5CA3C5DBF513A385E9B3A2A4A87CC33
+:10DD000087E42B973B61BD2F72B961BC8D8BF27F8D
+:10DD1000A2427F4CFF7C223764D4A07EB9D31DEB96
+:10DD20005C43A65B35C4954A1B397DA89D9CA7A37F
+:10DD30008F461773FB63CDA5F93F8178F263EC56EC
+:10DD400090F87AC744B7CCD8789BDC87B72CCC073F
+:10DD5000BA30DEBE63C8FBE987374E5F0D2FDA7B32
+:10DD60006A1FE502BE2643C06920F4C3E87F217C18
+:10DD700045C7E5F49F1A7B1EFEBE792C25416A3FFC
+:10DD80002CB8E03CEE2341DB79E6A1D19F5C66A094
+:10DD9000BFFFA1D157821C6AF45E70E031E4DF0559
+:10DDA000541E615FFE78C3DD86F5210A5F1CBA8FC1
+:10DDB0000A92ECFCFF7374FF440E6640DE57701D40
+:10DDC0005B474E6C7C30438FE725AEA90B812E64F8
+:10DDD000D3C08B5A3F8205DE0E15D72519E361BBF0
+:10DDE0005DFE809BBE2FE37EF58AA4C231B1D67D55
+:10DDF000EA174E81F8735DEDCC29106F93B9DD08F9
+:10DE0000BFAC05F6265C811EEB7EAD064ED7FB6BE4
+:10DE10006B307E4D6C41E2D19FF725CC2EFA86B057
+:10DE2000788BD64E91FD1E887F2AFC3CB22CF95788
+:10DE300066E6411C232527A8C3DF436E66D7AD499C
+:10DE40003BE0817C522BED1FE231B674E9AC719F4F
+:10DE5000929573844932CC474E09138C6766D3F789
+:10DE60003A7C2B2914CEF3F89B92CD8DFB451261A1
+:10DE7000769A367FFA06D7B307F8BAB41CE2B82907
+:10DE8000608759D01F5ACFE394BFAC2DE2789070D1
+:10DE90001DB326B1FA4A2283DB0E716B11D6D50869
+:10DEA000965D70C38E885793E1EF8F2611157FA77B
+:10DEB0006F0089D4E33D2653BBEE81F7BE04FF1605
+:10DEC000E0832F07777E28401CBAC87F09ACBF8D3E
+:10DED000623047A5F57F25F6E6403DF87DAFF79324
+:10DEE000D97338E42DFB75FB52EC5E4E551FD733CA
+:10DEF00097872F954CFB357FBE44FFBD39C1B70BCB
+:10DF0000E048F958C07D983A3BBBD7A7CE7573223D
+:10DF1000ACDF8739BD90FEC03F1DCC8E392BA9895F
+:10DF2000C918DFCCCA7DC530BED75096B8FFB689B8
+:10DF3000F2A3A4BB977594E4B300BF8C6EA0EFF579
+:10DF4000F48B11574B76E2F5B731F76134F8E8B846
+:10DF500004F0279E2B64EBAB890FF6080CFEA08B18
+:10DF6000FB5B2428023DE768F7054B2B5859FBBDA6
+:10DF700008A02285E3036D7F81AC6065BE4F1998D0
+:10DF8000C7F621CDF0CC697FA013E2FA73DA07CF90
+:10DF900087FDA939CE317F82E71EB9F74002D881CB
+:10DFA000770B78FEE3C7BF7B454EA0CF9DEF6CC4D7
+:10DFB000F3C6A7B9DCDD4E7AF11E763FF1F07DF2B3
+:10DFC00010BE9F073F3087E5B00C7EFADC48E8477B
+:10DFD000D7D0D26DAF84AE01B3EDF68EDEDF801AFE
+:10DFE000F0873D85B807A0B56BF3BECACAAC5D1417
+:10DFF0000F366E8FDA705ED179DB100F1FF4E58D6E
+:10E0000007911E7D78E2F72A6978E99B77E2CD5780
+:10E01000439C379E3E9BE3CCFA13DBFC607099F186
+:10E02000F4397CA276E4E76E9F3D91EAB78FDD3E3E
+:10E03000073C2B6DBD19D20894173794AB45FFF000
+:10E04000548A87D3C3FC970C047C740EB8283DFA1D
+:10E05000A19DE901929781F3D1EE7D3F78EF711791
+:10E06000D89DF53BDFCB806795D8B5F6168C6F8AC7
+:10E07000E80F9D6DBDE4BCE7C33E84B8135DFF4669
+:10E08000276A7CC8E677073F5F73476B029EAFB98C
+:10E0900063A968B8B7F98EA52CEF8E489DE36E3260
+:10E0A000D8EB2BE2F6037100733FF39716908F07BE
+:10E0B000C03EAB672AC6059E62FC357FBA4F847CA2
+:10E0C000E4C92B058CB74C3AAAB675D1F2FC5012B4
+:10E0D000FEDED1FC7B97E4C23D04D59D2CBE3748C3
+:10E0E0005C9CF333889F1C60EB389417837C3B7DEA
+:10E0F000AA5317EFEF966B72E0DEBDE06D4E1FF096
+:10E100004FF14DBE0FF0F712791C425B5777351671
+:10E11000631E6BF15C7522D0BD386CC7DF1F2CB657
+:10E1200011C941F558B1446CF01CA410C90E4F0739
+:10E13000B1C1337F39BB27BBA4F17AB40FDC138B99
+:10E1400014B8FFB6B8FDD92FA07DA914D9CFCEB58C
+:10E1500030FC14B71FFA1AF867A1AF08F30EBFB36B
+:10E160004531F87F63C3C6F2E56DC6724EC458CE22
+:10E17000ED3096B7C21D673A3BE2C05E2BAE131579
+:10E18000A7D839BD9704589B201E6C45799A56D163
+:10E190009E0FFBD1A79E7759E0FB9EBF30BFB7779C
+:10E1A000AB1DEF7BDBFF7B0771405EE10BF68DF073
+:10E1B000FD94239C0F71385A9FFDCE5651780CF870
+:10E1C0006F2F5EA6F9E9A17130AF17FFCAF2647A2A
+:10E1D000B75AF1F7534EED7EF679D8173BB575284F
+:10E1E000DA592F09410BF41B5CC5E86FE6D38A2D81
+:10E1F00046BFF89E44A66F7A0486EF4B1A8DF3BE95
+:10E2000034642CFF3C91F953F388EE7D26ECDFABB0
+:10E21000F569B0AE3E1DFBBEE1FBB95C3CF79CA2CC
+:10E22000F1ADC8EF6723AAEEFCD29EE8FEDD5D43A8
+:10E2300021AF02703122FABEC234AED67F5122DB4A
+:10E24000874FE1FB33BD6F88889F93A6DF2DECB32A
+:10E25000EB6A6B064FD7AD43258DFB538BC13F6AED
+:10E26000DA9F3A4FB7BE546E3D987A2BE62549F8AF
+:10E27000BB4C95739E7968720ABC17C3002F7C87CC
+:10E28000B85777F8376EA847EDDDF1A20EEFA58DF0
+:10E29000770F9EAE93D3BF952F3579AAE4F6C9AE1A
+:10E2A000899D8590275ED1C87EBFA922FCA31BE172
+:10E2B000F71749133B679A2F912291CA4FE5F61F32
+:10E2C000FD107E8F2BF0E4042FC043BBB809DE574E
+:10E2D000B47C8AE709569B7E47407BEEE3F4A5F5C4
+:10E2E00023165A7FF5CDCE32D04FB4DF57A07C2015
+:10E2F0006B23DE6FE23EC1E2B4F4FDFBF09328270E
+:10E300000A826FDE4A9B9E22E177AFC984791BF9AE
+:10E310008CF2AD007657EF66017FD7965A5AF937DF
+:10E320008049ED5B8679B7F4FB1DB1CE3B2F0A190E
+:10E33000FB31D3FFF79C7FE95F969E8FCCF506CC2F
+:10E340000AE2B9C4CAA554DFE9ECFCCAA30D789F60
+:10E35000A3791C0CC2E9F20D60BD5451BEEDDC6E18
+:10E3600020822D9FE7CD8E6465BCB710F895324AA8
+:10E37000C56564BA0AF8BE81CC84E74B42E42151FA
+:10E38000647A02E340DB12504F747BBA9E7902F844
+:10E39000AB652CC69F86F0F39EDD6A04EF79ECE155
+:10E3A000F1C96E0F2B97B7DB310FE6D46905F5E89D
+:10E3B000B2F04137D0A3FB79BB057E97F4D4F601C8
+:10E3C000059027D91D66F7FF9E0C0FC0DF7F8DB724
+:10E3D0006E99F581B64E1E817FC27A9AE8FB06D609
+:10E3E0005BB282E5910E1A509313EBF724B47629B1
+:10E3F0004A4D0EF829FF0BC935400200800000008D
+:10E400001F8B080000000000000BDD7D0D7854D547
+:10E4100099F0B973EFFC65669299C9249984FC4C14
+:10E42000420801024E42884851272160C054078AA1
+:10E430001A7F8AC37F80FC89B61B956E26266242AE
+:10E4400051C31A1110704051BA6A1B5CD46883CF53
+:10E450008068B1D57EB176BBFEECB223B088562081
+:10E46000A2A5B4DB96EF7DDF73EECCDC49A2747716
+:10E47000BFEEF37CE943AFE79E73CFCFFBBEE7FD72
+:10E480003F6786BE6BF5EECE67F017CC575C8C9D70
+:10E490000BB8BD1BA0BC58825757306671FA8DF679
+:10E4A00034C66CE58CF9E09FF388BC5B86FAE3B276
+:10E4B000F7FBF6B18C2D637E03C36779C0C00AE019
+:10E4C0009B4E689CC9D852858515273C17FA3E900B
+:10E4D000A6509931F87EE97629D401DF2FDB6864F4
+:10E4E000CCC4E8EF22FC5BD10BE5E25879150B199F
+:10E4F000980CFFB13DAE1DF4BF4A091F9492195B01
+:10E500006D62610BF4BBFA29ED776B5898E6D3F096
+:10E51000DC45637CFFB03EC6606ABF63EABA7C1E1E
+:10E52000FB34C65C0628C3BA87DED187100EFF21F4
+:10E53000FB695D6B5880FAB9A5B58A1D4F65ACF9CA
+:10E54000EED6CC65F03CDB7A4FE6B2A9508FF38073
+:10E55000F1AD8C7FCF605D7B00666BAA593807E612
+:10E56000B71CD69B5406E501293C19CB26164C2E28
+:10E57000E3EF53CAF87A7D71F3AB673D345EFD7605
+:10E58000ED7BF6EB548267031BA47AF6545C3DC026
+:10E59000A341C0A1E139781F078719CF4941DB6545
+:10E5A000580A75A4C3FC9A4E31B6014A4DFB2F1A86
+:10E5B00035FDB31EC6000E19498C99015F8F4AAC18
+:10E5C000AEAF84BE9B307F32B4C1BFABB1DC4EED89
+:10E5D0008E0AF83D7AC38ACC00B47BD801E52C01C1
+:10E5E000E0E930860E07A772D804E3244D8D96A982
+:10E5F000BEE23E5E9E6F2FAED992CDD8667D20D30F
+:10E600000E405C2AFBDFD401FC9E71066E40BC2CE0
+:10E61000D5F972155C2FF315F9611EAC95C3E1B104
+:10E62000B296092D25B179C5E6C7F1BB59EA0BEBC6
+:10E6300080CE82AF48DE3D1EA4DB217DC01A6BD7A1
+:10E640006C97681D2987226F8E41BCBF28B1DDD031
+:10E650006EABF4F19B63E0BBAD733DAC03CA6EC01F
+:10E66000935C86EF59A7047029DF3FFF8E3710CFE8
+:10E67000E549DE71F068DC5F29375A69FDB7FB6157
+:10E680003E1996965D3AA8CFB8BDB80CE91BD67D69
+:10E69000FB02787F97DD43E3655A39DEDDF705F34A
+:10E6A000D796E0F8FE3BDE80F18626277971FC0CD8
+:10E6B0008095CD49CF2E33B663ED12B67B3499F7F2
+:10E6C0009FA6936F9F8FE5325E76AE937CBB89F8F1
+:10E6D00036D1BA338CAC06E789EF4325B4657CFBB1
+:10E6E000A83EC4F13BABA514FBCB18CB9F2E4338FF
+:10E6F0001BFB795BC5F740A68EA5E37CE1BF613EBD
+:10E7000077EDABCC70C2F76F7F6E527429F0743323
+:10E710003688ED94B095E1B3B098B73789F6A5B3D4
+:10E72000327033B872B5EDCEEA7D2953012EC17730
+:10E730006586F8F8CAEA4B7140BB6F19F83A12F1D6
+:10E74000B813F103EB69BE00334F8DC35BDD790372
+:10E75000F6D77C4161A1A9B1F79FB79958A828566F
+:10E760006EA83F3407DB35B2C1F548578D7D1616CC
+:10E770008AA3F76F258D3CAE4ADFCD17742C984ADB
+:10E78000E49BEDB7217C86D62FC7F91F90D81E8653
+:10E79000F506168C1BBFF982535B8ECE339DFA892A
+:10E7A000B563DA76FDBFA7766C7A2419C739638F13
+:10E7B000243BC5FAF0BB2C99B5205ECE8674413D52
+:10E7C000ECE3331E5E7F96B19A3E6BACBDDADF9907
+:10E7D0003A030B13DC87A85F844B1078DBB6812FDC
+:10E7E0000C1E28370C1C24B8A8F4100F9F601CDFE7
+:10E7F00048EF180CEB604FFFDABEAAABC40CA83888
+:10E80000A4EEDF355DBE99502FEB34FBD9521EDDEF
+:10E81000DFC4561ED5C9821F347455CF8C2FF3F632
+:10E82000B1EF1B6BAA61FF9797F0EF8FDA9B8EDC3D
+:10E83000A7C4F811AC2317E1122D9B12CA56284F1A
+:10E840008E2BDB13EA5D09F5EE8472366FFFB92D6E
+:10E850009C2B7B19FBD4BEB64601FEF279667891FB
+:10E8600004E58D1D77D554039F6B2C1FF4C9C83F59
+:10E870000724AFC462F06BF2325F08E067F5460C24
+:10E880004B4B100E836FE2FE6FE897EC12D0B9B5D8
+:10E890006F5F98CAF89D27EEBB3E89BE6BE8FB9878
+:10E8A000BE1BB5FF621DEDE30DC5C7A81D00C07EF0
+:10E8B00002F0741393580A80345F09FC11F9646301
+:10E8C000DF275CEEB221035F1FE78367327DAF1362
+:10E8D0001F3C20D971DF45E90EFBB5C6E85D6DFF31
+:10E8E000D1E4817FC66E2C777DD1AE40FB7F6BFC7F
+:10E8F000641A03547D844DAE40BE1A9A80F2781B90
+:10E900000B4C4039F4DDC6710775D0EEA83EB283DA
+:10E9100001BC8A1D1B6A146877D416C99180874C84
+:10E92000DCD4CBCB69911D08CFE0A64709BE477365
+:10E9300022393A284F718479795C6407966FDCF448
+:10E940002C2F4F8EE4C8F07D41F0B99A6A28EFB1C0
+:10E950008FBC5FF31C9C8FABF33B31D697E54843EC
+:10E96000B2E37262871E2006FC70D1EACF9EDF03FD
+:10E970007058748F85F8D49ECFBF33CF4FEB0FFA0A
+:10E98000950AE0879CF4B91C237EAC901E9089B256
+:10E99000CB19C3872D77D0437C7E62CB3E94F71989
+:10E9A0008B4A88CF5F48F1B53BA6C59EBF4BE7CFEA
+:10E9B00076879DF36559E7A3F6F7DA48EF79D8CC67
+:10E9C000D703FB86F06B15F82817EB2977E8E89951
+:10E9D0006B9F4DFD7C28F9B69A647CB2A019F1B901
+:10E9E0002A89F48C5B77015F00BEDC2BE6DDBB6916
+:10E9F000422808FDDF2A313FF28D5E872F13F9C3CD
+:10EA00004B7F916FC7F5F69642199E3F15FCBE7776
+:10EA1000BE2FD31127177B77F17A95EFF4E6F3EF4A
+:10EA2000557993D1C1C7C97878C26E5C8745613E7C
+:10EA30002C2FAF2BDADD4E727B01CD97F97C99122A
+:10EA4000ACF7C4AA021DEA912A7E9442DF75587F72
+:10EA50000BF66F8DE1491DBF1DD79D867A00C87DDD
+:10EA6000586F9B33D08EF8043D600AE981420F68ED
+:10EA7000C7F5C6C197299169F8FEFF2338DD89EBF8
+:10EA8000FEEFC269047E11C4711B5B815FE8E2F88E
+:10EA90008580DF6629ACCFE0FCC28B720EDF2F00D1
+:10EAA000FE788B3DF000F6AF8EBFE8DE46D2FBD499
+:10EAB0007959FEEEE59A9BD8F07D96A8971DFDD07A
+:10EAC000B491811C3B6AE823BE78741EF3B623FF21
+:10EAD000D0B17A84A3AA5756DCB3E66D06FAEC9758
+:10EAE0000E99F0DC2DF932715DDD805713CAE1F922
+:10EAF00086D09EFC985CEC7584B6AE40BCDE50E2DD
+:10EB00000D7A483ED27E0BB65AA85DAF23C214AC34
+:10EB1000BFC2638799209E091F43371B42BB25C490
+:10EB200037A797DE5513434189F01EA4EF6FE6F433
+:10EB3000D33B9F917EDF7BB39BE8C6CC42669CCFE4
+:10EB4000687490DEC1888E98E29B32DF1683C32FF3
+:10EB5000C5BEB694475EFC17D423379A498F4499B3
+:10EB6000897617EBC9A0F9023E5F22FA50EDA5475E
+:10EB700032431BC83EF356203E1EB0F916D3FC7F2D
+:10EB800060F1E0FCB79B5997A90CCD0FD649FC4E1C
+:10EB9000CC87F53CC6503FBB5DE867FF5E7FCE8605
+:10EBA0007AC01B0EAE5F21A19880FF2D61BC7EC98B
+:10EBB0003ACBC768CF2C5927878D60AFB0AED9BE8E
+:10EBC000489C9D411405FD0504BF645B866C483775
+:10EBD00001FC2E19FBFFA3CD63C5327C3F05D10E8E
+:10EBE000DF17C7BE7F5FECDB45329F3F6BB378100A
+:10EBF000BE897CFD7D757E3D8FF9E2C753C749EC28
+:10EC000017ECB80F903E01EEE114D4E77F20135EBD
+:10EC100013E7EB320C3D6886FA456DB2E33E806740
+:10EC2000A0D546EB55E77B7BC6D095645F25F47F86
+:10EC3000D2D254A1E0FA85FDC1D669ED2FC60CB140
+:10EC400032D0C572364476CCB0F7C26E4DB4FB18E4
+:10EC5000FB8B31BE9DBA5F98474A98BFA02B8FA40B
+:10EC600020DE0212C79BC130B408F94EE2BC5578D1
+:10EC70001A9D3A01774E1789F0363AB9DC4984B7C4
+:10EC8000CB10C9C17E03AD46825362FFAA5C7CCC27
+:10EC90000CFB07E86E8B2411BD6EB9DB42728E99B6
+:10ECA000389E9B572779907EB719869EA67DF5AA38
+:10ECB0009121DECF9A875E227E55C8FD0A677F29A3
+:10ECC000EFC27667D238DD9F79454FFB8D4F06F452
+:10ECD000A15FCABBA95EE2FD9E69B77870BF36230B
+:10ECE000A461FCE6E07FB63180EF711DB7939BFB1A
+:10ECF000B5F6F019F8575F16E31B67191F27D8CF31
+:10ED0000F904AC74158D736B12DB00FD36E9241F1A
+:10ED1000EA4F4DAB27863A383D99703F3588293503
+:10ED2000E9C02E2C8BEDFF26DDB122B4AB1A4C1BB3
+:10ED300007E564AA3F8CF618437B0ABE5B8D1FE58E
+:10ED40000F877FD3C6DFFE19E7DDB45F4B170D31A8
+:10ED5000FA912E4AF87D1C3DE5C7E884F46FE41F64
+:10ED6000D52C344EE27E1A2C5B6A0643E8A769165E
+:10ED7000FE8BB4439139483FB6F23EB6049ECDA710
+:10ED8000B8FE316360D7EB68073B6A06737099CDB4
+:10ED9000AD6BA79E981AC3AF3ACF2B0636C968DF72
+:10EDA000A97A4B9C7D3961C1E4F8E77DF41DDAABAB
+:10EDB000385E045FE1BE51B8BCDB2CE41DC845E2FF
+:10EDC000CBCB7BC6935C44B985FC4DB57791DF21F5
+:10EDD0007F79C659759B13D6E94DADBAC9398D8F68
+:10EDE000437A3E1A49570C8767A2DC51DBA1DDDB71
+:10EDF000621DBD5DD40FB43585F30F45A2F28A5F65
+:10EE0000E8776DA0F929442F6B77E4133F56FD3561
+:10EE10000DC24FB542F8775608FFCECA2D46E68997
+:10EE2000F76785B4E506C10F1A5984FBB9F6427D30
+:10EE3000BC5FA79A856D588FFE1D7CF669BF6F6613
+:10EE4000A1590AE2B7FFA231FE3DEBE5EBBD5DE063
+:10EE50007DAB99FB7566ACDB257367155F6F4A99CF
+:10EE60002FFF7E94236FE9C9FFF01F024F2A5C2C0D
+:10EE7000CEAAC508EF24B4D7B0DDFD4682CB0990F9
+:10EE8000D7FB84DF6301DAA16D81CCC242048F3DE0
+:10EE900077816D387C37BC6AAE477AE97172BD45BF
+:10EEA0007D3FC7A9A732F98310EEED16D2BB01CC86
+:10EEB00053908E2A0A5439CAA6A01FEA633DE8631C
+:10EEC000506EBAD11AC0FE22A837407987E05F3B66
+:10EED0009C06EA4F2D47ED3C412F300EF5877E19F9
+:10EEE0007F1C1D3C156DBF49E8939C2F6C5E9544BB
+:10EEF000FC2846B73A46745BE237A03FE955C14764
+:10EF00005E0580929DD567E67C44E1FCE9D553130C
+:10EF100089EF1DF96C35F195737549CC28517B9FAC
+:10EF200084F52F1A43F7417999F0B3BE2A713D3128
+:10EF300078C046FD3418025BD1EFD0F0C2382F60A4
+:10EF40008CBD6408FDE869AC7FCD4C7EAD86643E27
+:10EF5000CF8657C7109FFCA93EF4EC8FC94F6124A0
+:10EF6000FDAD21C99342F53F4F6558DF65098471B6
+:10EF70001F6519B95ED960081739008EC7425C3F1A
+:10EF80003E868C06FB1FB091DE03D3CCC4F18F7795
+:10EF900067783778627039FEE024A2FFCD7A8EB7A9
+:10EFA000E02BDCEF794CEF9F9309E5632F967AC154
+:10EFB000B26467FD86B001E6D8FC30D7E796EA3C3C
+:10EFC0003B5B9137BD66F16AECD18756D6627DF323
+:10EFD000EA75D7211F1C6D3F233F8FF7E79E6143E2
+:10EFE000B9648FD617F48561DC330313BC243E99D2
+:10EFF0001B900D7462E76D4FE801DE485F07F44433
+:10F00000BF97DA3FAE17ED43942F384E33F0DFA8A9
+:10F010009F99F86F5C591EA9CCF1D9FC6A86D0DFA4
+:10F02000B4F5B7A604CEE1FE6AFA87DF1F6D25F8B6
+:10F030000E11FF633DDC7F7E42EF5B8474EAA80E15
+:10F040001B96C4C9EDA4542ECF971A859EC7C286BD
+:10F05000F87DA7D6575469E95C7D9A5339BDDB0624
+:10F06000391F1F5EAF13FBE13B46945BDCB503F633
+:10F07000F629EEEF484AF550FD8C5361C35228E75C
+:10F08000AD0B1B568827EE0B8077D804EB3EB1D52D
+:10F09000C6F7338001FB59319D91BEB242063DB5A2
+:10F0A0000CDF7BFA238097932F3A387DFD09A0026D
+:10F0B000F05ECC443B23E8B5C0B75EEE94C2A8F73F
+:10F0C0002FDE62DC6DCEC77DEC936D88CF1D12F113
+:10F0D000ADC59D95455BA1BC7AFF64C27FF2744EBD
+:10F0E00097AB430E927F33041F5C6A0C1948CF7EA6
+:10F0F00096FBF1A07FD2971BE0A3CCB2E17040FE5B
+:10F10000ADA18790360E31A34FF0D3BD71F1878248
+:10F1100038BEDE97F03DE8795AFA08AA7287F339CB
+:10F12000E6C9403EA7F2618BD33F2D95F050988100
+:10F13000F8057C723EB94F22B836B2162E3704BF9E
+:10F140008F8E2BE4C54939C8E59271133DE7A5E6DA
+:10F1500013DE56A3BC21BF3AB7FF46A38379A93A71
+:10F1600061278C4C07D70A3A6838C5C257C2780D58
+:10F17000EB58B8710A7FDAA6901CE4F2D024E21DA5
+:10F18000261E0FF926B998280787C9BD047997610B
+:10F1900010F24DE039DEDF8DF27EC6BA908C7ECF64
+:10F1A0005CBBAF32635A4C7F697EDF64F25C86657C
+:10F1B0003F2BB0A2FFA6F25937FA7FC15EC77D652B
+:10F1C00001B8EC42F9A2EAB76EBE5EB781D3AF5E7A
+:10F1D000F1B3522BE26590ECD9A13466477A54E141
+:10F1E000B9C306DF95E1777CBF45BF37B1CEA4B880
+:10F1F000EFAB5E35135F3DFF8A2D6424BD2390E79E
+:10F2000080FED23F32921E7AE6551BC9CF3342FEB2
+:10F21000B954BF005B4FF85927F01A645563D0BF4B
+:10F22000CAA479639005AA7A58A363347FB7A8CF9C
+:10F230001FBC91D39591ECC9F38EC8F7B10CF36163
+:10F24000A85FDF25F0DCBC7F56E9BDF0BED96FF5C5
+:10F2500072E8074A915E8DF25D37A2DF658EBC6E63
+:10F26000E86E5847638ED56E844FAAF3FEF53737A4
+:10F2700043F9D3FD7A66443CEF9955C70A46E7BF88
+:10F28000AB42FA6391B8FDB266AFB6DCD8A72D37B2
+:10F2900033E558248E1F3F9E6A739D9C44BCC37BFC
+:10F2A00011E8DB686C39B50BE66BFCA991E4514BB6
+:10F2B0006A20949A867AF9D09B086763DEE753D078
+:10F2C0008F5195F7278AFB9CFF01F3E2BCCF9B2B64
+:10F2D000497E9FDF6AF604E3F857B3A0FFDEDC5AED
+:10F2E000AAEFDD66F448BCBE765A05EA833436FEE2
+:10F2F000997400FFE62D733F25BB09B57628F7A268
+:10F300007E89DFBD2085DA517FDCC2E5DE69D01F52
+:10F310004D309F9308678C7BC803734CF09FBDCE24
+:10F320009A09C85F943F2B7EC4FF03D8559CBE7BCF
+:10F3300020CAA7B99FE75AF4F38C253FCF01E41BFD
+:10F340008DA688A112FAB9FACF5F115F5ED9BA848F
+:10F35000F4FA989E6B243EB2F2EE00BD7F7DEB3551
+:10F36000B4AE93B06E84CFC91DDC9E5B996D0DE188
+:10F37000FCAE7670FD77257C2749C3E19208874F64
+:10F38000B65FE3467C7FC2F878C13EAE277C621F41
+:10F390004C26FEE36949463DAF79CB359F22DF5AC3
+:10F3A000B943F6A21C67076CE41759B963F684E504
+:10F3B00056ECE7CBD44A84DBCED97699DECBFE106F
+:10F3C000F7AF0C5E0DEF959D977B709F1CDE61E49F
+:10F3D000F373989EC6F95FFD6799E85ED1B100EAC4
+:10F3E000ABBD06DF04DC6F9EED7BE6205C3F999FA2
+:10F3F000A5A3F6CF4BCC8E7070B4A6E3FB9592E23A
+:10F40000C7FD55BF65556DBC3ED2952A137E2AF3C4
+:10F41000D6A547AC44EF37A29C6BDCA127BDEEF02C
+:10F42000820F7F73B32B46EF2BE59E1B67C4E91B4E
+:10F43000CDDBBF2DE8012436C069A58093316F5D17
+:10F44000118EFB4DF4BFF2BE96221EAFF9FA7D106D
+:10F45000DDDFDBF97EF833C8FB8BE8EFCB766AF4AF
+:10F46000FBD1EC20D51F6DF232DF1E2BC5157D6858
+:10F47000E716B814AA2F400202FA52FEB076EF3B0C
+:10F4800030FFFDA9018B0BCA79CC578A78F50CD9CE
+:10F49000AB409DC42591FEC3B61BB93EA970BFDC2D
+:10F4A000E634F6F486B879E68AFE607FBAB09F3318
+:10F4B0001FFCE94D845F53EEE75378BCED2B8A5F68
+:10F4C0005907785CD3EAF533A48BE681F96C594986
+:10F4D0008C1F367B39BF1EC6575C7ACEBF5C43D4C7
+:10F4E0004F4D1AE767AA3F785B6B12F9FDB6B94238
+:10F4F000666EDF0619F2F3EBCA651E8F117A895F1B
+:10F50000F8D14CBED719C66B9857F68E83F2A0EF90
+:10F5100078672A94DF299FED95A16CF53DD9558038
+:10F52000EBF6EA45FD58F227BE3DB392F493EB7C2F
+:10F53000328DCBEA93C95E1FF4BDE75A06E35ECF76
+:10F540007CA927608C1A10D688C7411C1BF0655413
+:10F5500002D35D7176D3B7BD73534FC4CB4B1F97A6
+:10F56000FF688FF789B8C24870F0A6565E85F0BD77
+:10F57000FA2A8E87CF9EE7F6C76766EEE756DB7DF1
+:10F5800066E372C6EF52FD847DB9C8E7A3E5DB8A66
+:10F5900035716297A12F17F7D96F256D3FABBB74FB
+:10F5A00014BF5DD5C5285EFBD98F5ECE457EFBE9D5
+:10F5B0009E977397C4CD2FF13BF5798B3A9EF04B14
+:10F5C000A97E4A97885B2FF11AB93F70143FA5DADC
+:10F5D0009E6DE1F6D859E0EE4877EA7767EB937CC9
+:10F5E000A8579E6526E2674B0684DFD3E72B74A1FC
+:10F5F000FDA07E9FD0FF23827EA47E89EC734BC941
+:10F6000010F1D75526FF9B633C98B7E223FCCC450D
+:10F610003C4A48AF3E03AE5B11769E51F1DF8178E4
+:10F6200058DEA3C5638E4BC433EC2EC2BBA1C9AA5E
+:10F63000A07C48EF10FCFA7B3AB25F0C596E2BF2BB
+:10F64000A5AB8B923A312EEF4A4A9E827EF59CAC56
+:10F65000626A1FACE2741D4C67E4B7CA642D12F1F4
+:10F660005B3BF783674F6776CC03F9A98BEB0D6E95
+:10F67000E6DD22933ED827513C40AC5FE5EB482FB6
+:10F68000C8E73E934C442FD28044FA9DACEB5B8498
+:10F69000FD8E463F5B5CAA5DCDE9275AFE1BD1CFAC
+:10F6A0006E75BC61F413A038DE12B76964FA117E7E
+:10F6B000D74B6E3F5A1CF17B26D50F2DE17A6B4557
+:10F6C0007FB5266B589E42FCE1F3787FEA76D03313
+:10F6D000D11E51E38E633A167BB89E3E1841BBDCC7
+:10F6E00072B989E4DC0F7583F9A8CF27C62101B36D
+:10F6F0000EE4F7C863C8AFD85AE53F911A27EF0F59
+:10F7000070BBA1E96E1FBD9F35C0E57B73A181F47D
+:10F71000CEE67E2988786EF21B42A67C8ABB2C2618
+:10F72000B9FDA0D9C3E3289E768AA3FCC0C3E32C0D
+:10F73000513F6A64E7BD486FF556F23B24C6635EED
+:10F74000FA8BCCC71FC768FCDE521EFFE99DEB2178
+:10F75000BF46629C8D7569F7AF1A67396B03C0C0ED
+:10F76000784B369A090F593287334B3171F9329CF5
+:10F770000F90BF367DBA408C888744F73590249629
+:10F78000B344BD1ABFB195F8F351C35D94BAFFAD50
+:10F79000A4697F4DBEC33D3FC47C8651F31D82C624
+:10F7A0005AAC37A1F62CEA71DA206FD5B2CFECC192
+:10F7B000F84EAC5E01BDD1D42F89F15EBE7636889D
+:10F7C000E0B3923A7EE7069F95E2C99AF1E2E7A795
+:10F7D00024F4AF87FEAD1ED13EF8E3B9B30B296E1A
+:10F7E00029EAA50D3E98DFC37A6D7F0452F13D16DC
+:10F7F000D4F10E67D4FC70E3CC98DC073DC09A3698
+:10F800002D26FF1FF8B0B6E73218CB62FFD2807208
+:10F810005595E3CD2E9EFF90B85FD3D338BF07FD3B
+:10F82000353D8DE40ED76B6B45FC12F4D939B8B574
+:10F830009AD7F919C62F415FC84A237DE1F3930790
+:10F84000117F0B3E237DBEF982C2FD2EA077A07EE4
+:10F850006E1274CEFAF5246F553A582DF84FAF0357
+:10F86000E43DD2EB01695A90E8A225F706C0C1DF5A
+:10F87000A7F90A711EAADD9538DF2BD3B87DDC5CB1
+:10F880005CB5B508FB7F4A6228EF37141F4B47BDB4
+:10F89000A479E0E3F4E571DFADEA7F94E0B06AAF0C
+:10F8A0007EC4F55F99C6E39D4DAFBC48FEC1CF4213
+:10F8B00012EDE57A25D43D03CAF5F53AD4D058794E
+:10F8C00068F1CDE4EFAF33B071B0BEB1288F701ED8
+:10F8D0007BBF139C81F619FC93E0D536FF0A927B1F
+:10F8E000DBEA4C568C3B34172FB983E0604FF22192
+:10F8F0001C36145765E2384DF3E7D8294E00FA1547
+:10F90000D637DD7D0BF94DD4796DE8D7D7A0DE551C
+:10F91000017AD63FC1BC739CF36ABCB0FFC6C8FB7A
+:10F920004AEFB462DC7864FEFB5E3AC767A7E40F77
+:10F930005E5F4E7E4216EFF7CBEBE7FADC0D690611
+:10F940008D5FF8863485E0303338380B69EF352524
+:10F950006241BDB799F9BE40FB92F9AD9E3D842747
+:10F96000CE475C6D1EF21F995C911F5E86F53315C4
+:10F97000B21F98127904C73DD3EDF26E60827EB15A
+:10F980007C774908F9E8EB69812588DF0AA13F9E69
+:10F9900079E59A52F4B3A9FA51F72E7308E384DD9E
+:10F9A00036CF3FD4201FFC83C2E3E2A6A1C1598811
+:10F9B0008F3F3AA9DF6E73A81BF11FDCA4A7FA578B
+:10F9C0006C8146A4CB53F36B8A282FC71A2CC238FC
+:10F9D000B0DED5C3504F007381FC0926979F61BCF0
+:10F9E000745670B122219F4FD03B6689FC52629EB3
+:10F9F000F0BE4AB0B1714005274DB4053A2FA6C6F6
+:10FA0000F490237F5AA8E04B553FD199783CABBA8C
+:10FA10002E89C948F7EB87DED4A1FFDA3548FA6BA7
+:10FA2000639F44E33416BF40F9626B445E52343F37
+:10FA3000488950BED4FA348BD0033BB91ECD06C9D9
+:10FA40005E66CF717C3216A13CAA981DD14EEDD4D2
+:10FA5000FE0CC2EFDE28FC2E20C1A87E539AAA5FBE
+:10FA6000DEA7F5D78B71374B833E19E15A2A69FC23
+:10FA7000C5EA73AFF83EE5D0D01CDCBF43AFA87930
+:10FA80009C3C4F73EBB4895E549D86E571F67F31E3
+:10FA900007E906146DDAAF4DFD9796C7F9BCD86734
+:10FAA000FFE3799C5EC9B71B9E2FA739B4799C5E92
+:10FAB0000E3F35CE9698BF792633ACF07CACC8CEDD
+:10FAC0003D489FFD46CAF3AAEDFFD9FB281F6B4DA9
+:10FAD000AC0FE390897A469BFD3B61A4FBB3A74F33
+:10FAE000EEBC9F611EEF4B5ECAE748D01F12ED844B
+:10FAF000DDD82473747DEF37517C727D2F5AFE1F41
+:10FB0000D7F7B83E1FDCC3F307547EDE2CECB3B34B
+:10FB1000F5E79251CE1C4B53F5CF843C87A7449E0A
+:10FB2000C3C0C8790E8AC817027D3D4874B28FC71A
+:10FB3000758E3C6D21FE71CEAEEC467DE9B46DE86C
+:10FB4000FB082C45E8499D078C1EE417C0EF887F11
+:10FB500007F7E9799C06E33618C7796D8288E38850
+:10FB600078D1AB16D25B1A923D29F8BD1AA7F9A934
+:10FB700090370D493C3ED36509FC3E6D84B8CD2ECF
+:10FB8000A17FED82AEECD8DFFB4611C7060681F6F9
+:10FB9000CE83393CEE20E2366745DCE678B12E6C48
+:10FBA000E07E08F25379BA149609F59EF7CD210F3D
+:10FBB000F767997420F797AA719BD7B89F6AA988AD
+:10FBC000CF1C5F3087F28796637EBC8C7E0CEE671D
+:10FBD0008EE6EB33BB0ED7B306D8C5366431418011
+:10FBE000FAE5F05AD249A84F783AA14CCAB2AFA769
+:10FBF00006C65DD2A9237B646997D65F7E7EC31D4E
+:10FC00003528BF1FE8E4F1C7609744F27B29F3B9B8
+:10FC100051DF50E9615C7A2AD159B053E7C371AE24
+:10FC20004CE7FE04007D88D6279E9D7AE16717F396
+:10FC30006867BA303E75127F3E60576A4694CBA221
+:10FC4000BF4E7D8BA912F5D81C1DF979CF1B7C7591
+:10FC5000E427751611DE3A6D2D5D35BC9EF6CA7926
+:10FC6000F3909FEAAF54B8A2C73C4EE49363D245E9
+:10FC7000FC2661BDCB7BB4E5C4F8C3AA90B6BC94A6
+:10FC800005C667E23985BDDAF763D239FF3FBF2188
+:10FC90005FF8F9BDE4E7EFD47B7E958F7CAA5B210A
+:10FCA0003ED99ECDE1A5CBE1CF0247751DE9070EF8
+:10FCB000D02B68BE7CFE0557BA2494979D0E4E97B4
+:10FCC000FFDD7927CE77767A11D71350B9C37DD46B
+:10FCD0002D8538BCF8BC2FD55FB1225D6B6F46CB4C
+:10FCE000FFF3F626A7C76E59EC373BF19F2522DEBE
+:10FCF000785CF23E1DC6F756D00B60DE4BBBE5329A
+:10FD0000D44F667DC74AEB687ACD1C32427DE3BA98
+:10FD1000482EEEA3A6AA4851CB0870C5D92A2ADFDF
+:10FD200082764B5C601FE0BEEDD2C6A186C7157D12
+:10FD3000F7A6A7A11D727CDFCF10DFFBCC2497E0D4
+:10FD4000BF0E1AD1DFF14A3EE94B5352021DE9289A
+:10FD5000CF93C23B9FC947FD84EB478D03C65DA887
+:10FD6000FF2DE9D49EAB611BB5712ED6E5247F062D
+:10FD7000EBD5BEC7F32B9AEF86C5BDB89CDF6C08E8
+:10FD80004C40BDEEEAAB787CFDF42A1D43FC2E9579
+:10FD9000BD2B908F9C366BF5EED3368EAFDDE9AA86
+:10FDA0009CF116219EA3E56178F616219E97EA58EC
+:10FDB00020BE9F46C4F354CC4EE7783EFDE2E545B5
+:10FDC00088E7CFF75D5E8478DEACEFF1E1BE79C6FF
+:10FDD00019781AE17362B69FF42635AFF252E9B191
+:10FDE0003F811EFBFFDFD1635D7CBE5FA21C3C1C1C
+:10FDF0008597560EBA0C9E6CE4874B4CC6AF958720
+:10FE0000F837A23FCD64247FC46B7FFAF221946F50
+:10FE1000C10199F40FB5BFD794C058F417BCF6BE12
+:10FE2000DB1B9446EFBF45E8556E130BA2DF43D5AD
+:10FE3000F755BD31911FBF2FE0782ADD578B7AB679
+:10FE4000EA9FAD177D9A425F72FDF42989FCAF26C7
+:10FE50004F1FCFAF3FB0D88EFED95321EE8F6D7AB2
+:10FE6000B194FCB5AB42AF8731FF890D4876B41B26
+:10FE7000563DF57132C6B3C10EFD243D2EBE325B38
+:10FE8000D8A1A742C79331EE0DE3D7A05CB6B886E0
+:10FE90000C48BF4D609F4113D6A40CD1B9A22617C0
+:10FEA00023795FDEAFB5D7D4F8E436BF81F8DDB68D
+:10FEB000012984F659BA21909F8DF28965DB4F5A4A
+:10FEC00062FBE577E93E17C62D637161DFEF715E76
+:10FED000AA5F27B23585E830A2673ED203B6DA04BE
+:10FEE0005FE2F19ADF6D778478FE126FFFBB503EC0
+:10FEF000955579BD429CD35B21CEE921FF0E27F0B9
+:10FF0000EFF87234DEAC9E47037E1E1E29FE1D975D
+:10FF1000B714FF7D131B12F979178D9A7EA3F93A56
+:10FF20002DA51E98F79ADBAC740EB119E8BAB52C62
+:10FF300046870D62292A1D3609BF6E73FD31B20353
+:10FF40009AF1FC05EA555E4E870D601F617E67E2FF
+:10FF5000BE657DDA7CC6D1F6716986761F47CB7F98
+:10FF6000233FE6CC0CEDFE55D7AFFAC1A3EB1C90B6
+:10FF7000F8FE4A5857A25D99E8BF56EDC24BE56BB3
+:10FF8000DF89CE87C3235AFE1BF3B5DB3346E36B11
+:10FF9000DAF8C05FCDD712E30485DCFF8D71028CE7
+:10FFA000DBFE77E3049F7A7AD2753C4F5F133FED17
+:10FFB000925AAE338DC5B8228F2F37DA8C14874D05
+:10FFC0008CAB367BE68838E2E06FAE40B9B95FCFE4
+:10FFD000509ED75B5752BCB2597ECE80470E87C524
+:10FFE000139583A4B7FFB571F5F5193617F1230FF3
+:10FFF000CBC7B87A625ED1EBD62F530371F8AD2A26
+:020000022000DC
+:1000000001857F043A362941167F5EAD3783EBC107
+:10001000AF8BFC17B781E7B13F6C033B0BD6E7D63C
+:10002000F1FC9CBF4FF36FCE48433ECEE1F7C42BAB
+:1000300037313C77F484BE8FF844B0D1EA457EA7CF
+:10004000FA55A2E309FBF352E9FAC709FBFCC77FA3
+:10005000E37DDEAFD2F35F1BEFDA026BD5D03FA3B7
+:10006000B8D6DB18AFC91F4EA7A3F5331ABDFE22C1
+:10007000C3FF6606ED33DF14CABBBD447E62291F91
+:100080003A8EFE1BB6DFE8417BC224CE65B08D9967
+:10009000224FD25B319FF285F9B906F5FCC7687A29
+:1000A000DFC7D1FDCEF5BE8F47E53BFF35BDAFCDF8
+:1000B000E93F8E72F644A5AF08E5E20336983FDAD1
+:1000C000733F328E78CE423D0F00F4C4CF9B3CCFBD
+:1000D000E3DC8974F587047EF987FF257EA977FF25
+:1000E0008DF865FD1F93D1AF397A3F419EF75B359F
+:1000F000E8137129867121751DCD833CBF2C5DE409
+:100100004DA9EFBF127AECED6E5F861B9E9F7F605C
+:1001100032B114507190C650DFF25BC9DFDFD4C733
+:10012000F3409AD6318AEBAAE7289BFAE733D4EB5F
+:10013000F6A706F2F1FB073EB406E514F4832F6040
+:10014000A8CF9DF980975B5203E3B0BE795D44135D
+:1001500057A8B8F8E57AF457C07CC9FE7719B5E717
+:1001600029E6BB393F539FD7097847D7E5E2F364C7
+:100170007D7208F5408B6790FC444DFBB9725621A7
+:10018000FBC81FCFD638E97C44D3FECA523A6FDE93
+:10019000672E453DB6E2A35A3BFA1F3EBFD24579D2
+:1001A00004B9726415EA51AFA70566E27C6DE5A15A
+:1001B000B9A887E6811E8A7AEDE7FBE69606E2FC9F
+:1001C000D99BD19F0DFD6EB669FDD5CCC4F3C0EBB4
+:1001D00077F33CDF576C8139D8DF66339F6F7093BC
+:1001E000C86B167EECC4FDAFEEFBE839C75B4D145F
+:1001F0007756F9C2663D0BA05C53F94989C8830361
+:1002000078F03CBC81F93C9F4394AD2E6D3EE2A951
+:10021000F4D925389F12378F0B2C370D49E8575FDB
+:100220002EE2ECD7887C09353FCAA8F8BF8BEDD900
+:10023000BA9A587CBD00BFB78B73BF3C0FC67281A2
+:10024000EBC7057603D18D0DF617F93F806E103F91
+:1002500033870667E179A2C2DEF04C84E76B17743E
+:10026000040F65FEDB141F4941B4413F633746BAB2
+:10027000C7A39FC4FEEB2B112F9E1E7B15826E7FA2
+:10028000AABFD14DFEEC9662B41BABFE59CFF3FC76
+:100290000E58C8FEEFCD6DA03CBF331F1A473C1768
+:1002A000A23E83EC3ECAEB2BE87F8FFCF4B6FDD276
+:1002B00088F99A5D6E2B8F1F0507297F8CCD74F10D
+:1002C000F384073EA2B8AED2AD9087A253EFD3E13C
+:1002D00039A8603B23FFE4B85EBB0EF19227F247DA
+:1002E000CEBEF69F53026487A87EF910CFF7D147A0
+:1002F000D6A35DA5B447AE821DCC1AF73B744D253D
+:10030000D8DF5013CF5BB730A493BCFEB1F77D0BA1
+:10031000CA795D762621FF79754D1EF943619DE30B
+:100320004658E71D6E9E9FA31CB0E8506E299B188F
+:10033000E5172A8EF42A9AF7A350867ED608BA517A
+:10034000E38D305D37CAA3DBDD811D88EFE8399886
+:10035000D6247E0E469CBBB4B57EF83C9E2FD96950
+:10036000E0E70C0FBD366901F9E5BA1509F170DE59
+:10037000B138CF0EEFF78A7D6B530699DD1A0FFF68
+:1003800043944F597080E79D297A4E274AB76B17DF
+:10039000FAFD2EA404286FF4CACEB04CF12AFB89D2
+:1003A000476A3C7176CB162E479AF6727B39D14E4E
+:1003B000F926F971D0ADD54BA2E5BF915EF27682F8
+:1003C000DCF8ABED0FA6B5DB12F593443B6D985E00
+:1003D0009DD0DF687A8A9AB751151B87E8E1759B33
+:1003E000AA070535792D555671AECDA4ED7FAF8B9B
+:1003F000F30935CF25BDC3D38E79E3433F60E4478E
+:1004000053F36D8255DC2E08EA4C74DECDCD7A288C
+:10041000CF660C0B4B12E9F7113AD79981F936F0F8
+:10042000DD07EE027E3E8579BB64E2871E09E76D3B
+:10043000C63C0DCACB0C6D5D81E3DC60A571CC9828
+:10044000A7311543EDBEADC83F67D5F3384316C895
+:100450005BA4DBAC424E87E63A9EAFA1E663A8F907
+:10046000132A1CAA047CB3C6AFC847FDBF5B0AFCB5
+:10047000483D4F1B7F4E3A7A3E7A55019D27899E13
+:100480008F2B64A2FED2CE4927C253CDDFA8B2077C
+:10049000EC9969C3CFCBAAF41187379AD7B6035C1E
+:1004A0005FAFAA37D0FCCFAE9A477EC2B3AB740C15
+:1004B000F74DD58091D35BC278DBA2F76084CC7412
+:1004C000DF85C0FB37E9AB80CF62F4C31E6AAB990E
+:1004D0007A02607BB8CD4FCFB366A94FBE8CCE2BCE
+:1004E0002E42CEF465E6B65ABCA7E0AC6D2817EFF5
+:1004F00039F832EBFE6F53396DE8289693B39EFFBF
+:1005000036DE7B7076DCD04EBCF7A0705B25AF4743
+:100510001ACC62ECB2CC8A6F0769DDDCAF342B7683
+:100520003EBB1CE1D3C822EB07C97FC3F3F3319F65
+:100530000FF1E0B61A489F718B3C4A562DF22A31D2
+:10054000C202E58ECC528A475B9967FF20D667F3DB
+:100550007340504FF4DB318EFB7D4D02AF2C5BF5C9
+:10056000134582C89F3AF21DF47D948FEE3786B80A
+:10057000BF8A8FFFEE8B93297EA4E6873266CF5920
+:100580003899F2493465F57E03A6D873505FE8D0F8
+:100590000BBD5494535302F333E3F4A27767FF5D2A
+:1005A00009EE83D32FDD5B887CE91A03E8ED23F0A5
+:1005B000A17FCDE27CE8ACDEDA25819EF65E72E0BA
+:1005C00016ECE77DCBA2390E58575D6AA5C181F3C1
+:1005D0000DFE4846BE9826F0ED58C8E7E7A8F64B52
+:1005E000CBA1DF0E33EC5FF83E2DA0F8288F3EB094
+:1005F00050BA01E6DD21717E0B1FA5905D52EC49DA
+:10060000C1FCE406711E5216FBFE8ABE4D32EAD3CF
+:10061000BF6AEB9FA114C6E53B88F8F17BF9ECF6C5
+:10062000F923F82D5B3339DF5E207B26231DAD9740
+:10063000FADFAECDC4F79C1E6727B796635EF1352F
+:10064000969672943FC3DEA7C0FB92B8B291B76B87
+:10065000300DE5E2F9649F25B02E13E33E8B3FA6F3
+:10066000B8E4F7B3DE3D8A7905EFEA7B6625A37C23
+:10067000C917E7FA855FF0CDF1AA5FD0C4CB93B874
+:100680005F309AAF3599E78BD52EE4E7106B453E86
+:10069000C21C3B3FB733A73CDFDB0153BC8E0D29A7
+:1006A000C8F7E6BCEF4F46BB9D2D0C94FB278FAEE1
+:1006B000CF30B7DE13BF5FE77AE2CAF0EFDA626DE0
+:1006C000F9DB5E6DF9FAE97F1E1F5FDE65F16DC52E
+:1006D00075FF54E2F98DC12B989DD6E99282A877D7
+:1006E0004C7A394B9CDFE47978FF28ECA297A7334A
+:1006F000AA4FDF6BDA8DF9EDAA1F5916F593DCCC02
+:1007000094E7E4F705A0BC1A92443E9F8B6225EC67
+:10071000A53BEC1C7ED0D600FDBCB4D843FB23DD4A
+:10072000AA6357E11E2A37911E5231C6948474730E
+:1007300048D09D7A1E57A5C30A85F9313F01865ED0
+:1007400088CF77F5F683E83F0E7ECA18C757A542D3
+:10075000F985622CC6DAA9FC98A0EF43624EC11F4E
+:1007600028B49FDFB019089FF2CFE55D282730F647
+:10077000827EE1731B27D2FCD4FD03BBBAD0954E19
+:100780002E6BD1AFA2C349140B7D42A56FD480B0AC
+:10079000DD18FCCF7CA273E23743D3F8FD09EFE507
+:1007A000737E32B4C929CE7BF178588E29DAAF0F27
+:1007B000FBCD8C8EC3CF13A58B32548575B0EE4F15
+:1007C00032F369D34A033FFB03C965AB3780E318B3
+:1007D000924D740E46DD37F6CEDFBE5D7B05AEB3BF
+:1007E000E87BB4CE79363BAEB318C8BACE494F5F7A
+:1007F0002AF5C7F78F9CE4F5E03EF94ECD2B3394F4
+:1008000038BA81EF1BF9F716EDF76EF8DE19F77DB0
+:10081000327C5F32FCFBA76CA6B06E0AF653E1890E
+:10082000103F0FD362E68975C9E9FCBB7922DFB3BB
+:100830003019DAA3BC29D6E663B0E95E13BFAF4333
+:100840009B7F718DB42E13F7D55C53E34004FAFB04
+:1008500099C0DB35BAC057783FDDCF16151DC6FDF0
+:1008600056630A29680F5DCBC2EB1199672B034FC2
+:1008700038C6123FF80BEE8B263930DE09E5D3FA85
+:100880009EC23BF269BF5CCC9C367CBE2A5DA8F35D
+:1008900045FA403A8BD247C2BCA378BAAE8F12D584
+:1008A0007680DE834F550F024B9AE7137B7262EB23
+:1008B00002229A636A29443DE467ED41E21BD7387E
+:1008C0001EA1BCA5336302AE2CC07FDD655FD0BD29
+:1008D00026CCBD783CEAF730DFB4ACB4FFBDF9AA52
+:1008E000FADEB07CDA4F0D9A7CDAD1F6953A6E33A7
+:1008F000E3F7D3CC1AD845F9B1CD0BAD5E3CE7D0C8
+:100900008CF99DE5143F223D0ECF01D33D2792493E
+:10091000E85D979A77CBF7616FA387F4B7281F1725
+:1009200079E3BDA57CDEBD7778D47B4EB87EB798E1
+:10093000F17B52D47B4E96DBA95ECD2FEFDDC5FD5A
+:1009400078BD2F8EA7F350A0BF91BEC052747C7E9D
+:10095000F9DAFB55F04F4A8FE5436FD6737D739BF1
+:10096000CE5B8170DE86719EAF89EFDE94A5F59B2C
+:10097000A8E544BFDE33CEC02D59E80F28F1E54A83
+:10098000403F4B0DDC6F07F4B51DCF4ED4B096A79A
+:10099000F0FEC0B9ACE5D7BAB1445F01A2AF495F80
+:1009A000F07B0563F4B598D3579098924A5F51BA9B
+:1009B0002A4ECC9F0AACC6F6BD8EBE8F9A504F1DF4
+:1009C00030125ED43CB8C47D1C379F137A3E1F970B
+:1009D0002CD37CD68E349F4BA1F378FACA609C9EB0
+:1009E00047A3F70C85056D65317ADF6509B4E3B877
+:1009F00051BA5FCFED9161F396AD441F37DE2CF312
+:100A0000FC700B9757188FC884F1E78BF16FECE6F9
+:100A10007474A3CD4074377FA091F28558358F2B25
+:100A200078E17FDC0EF4117CEBC4770B5DA57A24B2
+:100A3000D985B5DAF8439D558D6FF8F5B81F6F5C11
+:100A4000A83F162FEFEBD8C62F30AFAD0EE314EA58
+:100A50007730EEE359D1F37FE3314E7158D8E9672F
+:100A600081BE91FEDF485BB9FD0EA0DBF18F97944C
+:100A7000A13F6776FAAAA73641F9996D13A9FC46FA
+:100A8000FAAD77BD8BF53B8BA85C8D97B8A0BDD137
+:100A9000C8BF2FAEB8795E3E8C7BD82CFAC57D8559
+:100AA000765F52A0773EB4734F2928C37CC36AC1D6
+:100AB0001FCEDEC1F3DDAFBDCCC65338577AC86F49
+:100AC000549D24EABFCBFB7DBBF45FCA30EFB4BAC0
+:100AD00080DFE3F276D94F2762F9B0F4C5A291E244
+:100AE000DF938AA5F004804FB593B7AF2DFB511665
+:100AF000DAF1D555BC3CC95BD93D16EB75E7168DCF
+:100B000074EEF317623F45CF35897DFAB2EF633A51
+:100B1000C7E437495E5CA27FFAC7FC5E22AB64473C
+:100B2000FFA3DF97AFA09F74968FE7255699DA331E
+:100B3000D1FEBD2E6028C7FC52BBA9F430EA1929AA
+:100B4000D32BA7217E6799981EE512D0F9FF213A91
+:100B5000BFFC8BDC64242EAB96CE553A9AAFD2778D
+:100B6000B5968E617FFE7356DA37F3D7D1E818C693
+:100B7000FF77E41375DFD2CA95687F09FB2DB1FFBB
+:100B8000D1F800FEC5F3B9D83CFA685F6563D6D7E3
+:100B900058DC773DEABE1BC27518748374AE234FD0
+:100BA000F24EA4038DA3C87F757E39C0DB58D9F0FF
+:100BB00079E19FA2EA65FCCF85766EB6A887EF7CC7
+:100BC000CC199B178CCFC6A0DC5FCFE7B3436AE19B
+:100BD0007C43E8C5AA7DDCA4AEB75FBBDE8A247E79
+:100BE0009ED98DFE0BFCCE553AF1EBE6DD2CE4E60A
+:100BF0004293FF4123ACE106C752A2879B58F045C0
+:100C0000D44F8C2901E79834B4BB820722F9E4CF92
+:100C1000A5BC00C077EA9838FD449D57223C9A460F
+:100C2000E18789F34E84430C3F83A45FA9E7A3A225
+:100C3000EB4A588F2AFF5D06AD1FC829FC364EE1EE
+:100C4000A7410A413958CB92286F61965722395EE5
+:100C5000CB4CC43F6B6BB8DC745AB99C57E5EB685E
+:100C6000747DF5559CCFD4363071EE8ACF3F91AE6E
+:100C70003258E47BF8AC3579B62EC3FD8AFA80276A
+:100C8000B6DF6BADDCAF3B778CF01BB2C834B46F12
+:100C9000A3E5617EC4C834E41B89F745D55EE07ED8
+:100CA00044A7B897B5D6FBF134B4D79D359169C840
+:100CB0007F1E74F8E621DED4FBDC12F9CE8D63745E
+:100CC000AA1FF192E82D110F6ADC2835C55F87E372
+:100CD0009C96062BB0F29134E1D767817CA44787BC
+:100CE0003DBF12FD01C0DF2E5E44A30AAB005ED300
+:100CF0009D8100D2DB4DCC3F1BCFE2396B027AEEF7
+:100D0000E766B4FEB562FDB385DC3BB75D263F7D8B
+:100D1000B5AFF83174A5371FD1B310ED3B1FC9B182
+:100D20003562FEE718C7D3392B977F2BDFFAA70A66
+:100D3000A05C367E8B2E768F01FC9B104AD2DC6342
+:100D40003069AF53539EDC97A5697F597F81A6BE5A
+:100D5000343C51533FF54899A63C6D7086A6FDE59D
+:100D6000EF5769CA5744E669DA7FEBD4024DF9CAF6
+:100D7000A15B34ED8F0BFB94057D83C5E978CFB77C
+:100D8000A0CB0B4B34DFFD3679CE11A4CB651B799C
+:100D90009E70254046739F430F97EF2DF03F8E576F
+:100DA000BF82F05A017A2FE607AFDCA295FFF50368
+:100DB0009BD6234F4BCC5F58CD5AAAF06AB8C4FCDF
+:100DC000856AFB621DD2E1E363449EC2E5EC727169
+:100DD000FFCAD7E2B58815FE97F06A746BF16AF620
+:100DE00068F16A29D6E2D5E6D5E23565BA16AF0EC6
+:100DF0009F16AFA9355ABCA6F9B578CDA8D3E23570
+:100E000033A0C5EB987A2D5E735AB478CD6BD5E2DA
+:100E10002F3FB85A8BAF047CABFC6F6CD75A4DBBDD
+:100E200028DEFDF5947732AEE71E4DBF2ADE83F053
+:100E30003F8EF716CA0BFF6BF10EDC86FCA089789B
+:100E4000FF2001DF20373E44BE00F2FEDFF05937BD
+:100E50005EE8D5FE91E5BDCA7FE2E56BBCFD381AC0
+:100E60005F1A264F843D39AA3C49B0273FC0EC1891
+:100E7000D2533692BFE566419F5FE2AB2BD09FF91C
+:100E80006392931FC044A6C3BC3EC079C3381F24DD
+:100E90004D227BFF5616D6D3FDBB98F1079DDE8E03
+:100EA00009C032DE9BE3A1E7522147970B7F80CF39
+:100EB00012B83886FB01F2D271DCEC417E0FF2DB16
+:100EC000A997741FC031F4872B8C9D407F383CCF8D
+:100ED00098393D9C54F9838F795C71705B324B2A51
+:100EE00026BD514EA2BC9C253749244796FC9E3F07
+:100EF000D3B3B9FE99F8EC6855E1C6ED9299D91EC5
+:100F0000E2EBD9AC4FC83B16B08EA57EB8FFFA49CC
+:100F10007E0FE8F31253A63BE93812E131C3C4E770
+:100F2000F5BC9E99107ECFB28007E1F243055813BD
+:100F3000CF879F88F4B0E4F7EF16A03F49EEB05F8B
+:100F400087F73C4FC0F1601EB36F6B91D0BF9AE141
+:100F50006E91D07F33ECFDFE7B243CC7172D33DE32
+:100F60000EFF100EAA9FAC58C7E3C54377703DFF34
+:100F7000A9EF32F2FF74B4062B83182792C120C365
+:100F80007C123D3FF73B339BFBBF32D920DD2FCA9C
+:100F9000DE14FA99B897BD44E4979F11F19615BBFA
+:100FA0004C0CF3154AF61D74627C6505E07210E581
+:100FB0009912A07B2C4AB6BEE1E4F77DEB1D785E6A
+:100FC0004C95A3A3E35B6127E3F2B4018F23DE1703
+:100FD000795B0E97E31D6D3533313EA2CEE7FE36C9
+:100FE000DF4CA40F59F1529E17DE6FE388FBDEE061
+:100FF00082FAB8FDAB586B3465BDD54F9746AC6FE0
+:101000006B213AD38B7B781EC85E6B8FBFBFFFD638
+:101010006CA1479882CC9ECE840A8B4FE524F28740
+:101020003F326E0F1ADDD04F3C5FBB2B97C5FB776D
+:10103000BBDAFC34DFF55220809D180B59D89C8C0C
+:10104000F90378C611DE6FBDE608E6B3186C6BBD18
+:1010500061CFE87033BA95F3F17CA9215BCB97FEA1
+:10106000A1ED14C1A9A3AD8EC63B83BA1CFA773299
+:10107000B97FA7A36D31BDD7D578889E5EDF3AFED4
+:10108000A007EA8FC23FBC8FC6E8E2F362E5B9244D
+:101090009F16093A40DF510ED0CFD1563DD1D99D90
+:1010A00039D6106EC23BDF197710EFD334008CE4D1
+:1010B000BF62DED171049C0C822F013DF971BF1912
+:1010C000B214F2C33AED0B084FFFD5FE54F81ACC18
+:1010D0008CEE7B31E458C97F72A9F3DC922DEC7C55
+:1010E00055CE97E7121FBD53C0E5F5AD3CFFE7E8CD
+:1010F0005D8CF4EE3BEFE67EB03BC18EC77DC95AF6
+:10110000E1AF2246372ABF4EC31B37E0654F1B3085
+:101110009A22C61E6A33E1092766417FD5D8181E78
+:101120007B7C8A03DDE29BAA5DF3F1F9D0F4133DE9
+:10113000C8561E9EF9D5203ED1D78CE3DB5B5808FC
+:10114000F54C8A89C2F88E7A28C3F8C9A23E39C004
+:10115000CB29A23EA58E97737C2F48D538B18478D1
+:10116000448ED539B710F9DE32C6CFB78AF3ED3BDE
+:1011700004DF1D6375CEAFC6FADB18E5BDABF58F96
+:101180008BFA4CEBB1AEB1C897176ABFDF2AE0907B
+:10119000613DD6338BE216DA7A35CE90663D7784A0
+:1011A000BE2FD1D63F2ABEB759CF0DCEC2FA42EDDF
+:1011B000F80F8A7A8B95F343E6E7F794AAF53F1484
+:1011C000F5662B3FE7053C5953DF2DC6EF9042846F
+:1011D0001FBA8B15F74F1AF75BEE6C6357E2FEE907
+:1011E000691BA27DF450DB05C2D339CCF39916DB21
+:1011F00057F65636E2B9EB73829F247B223EDF0816
+:10120000FC4EAD77DAF9B972D96D203A325A05BF82
+:1012100010FB30CA2FA4162F272EEE4FFE267A86FB
+:101220000D761EF58B5CF8437ACEBE4BC702717CFF
+:101230002BAB218905E2DABB973935E5F4DBB23413
+:10124000ED5D0B0B34F5D6F2899A7AE6CBA1FDB2AF
+:1012500056D055524999A65E3DEFCE7A7234FAB314
+:10126000BE7086A6DDB9620FFD8EC7C9B9EAEF7DF3
+:10127000784DC817D6DA0A3250EE3CDB361D956C35
+:10128000F63CEC273CA2F49C83E7F93E87F151A899
+:10129000FFC7361FBDDF03F5A0B9B02761BF79A036
+:1012A000FDAE363B959F6873D373479B879E8FB780
+:1012B0001553FDD6362F951F83FEF1F928F483EFE1
+:1012C0001F69ABA1F2A6363F951F6EABA3F2836DEB
+:1012D000017AFEB0AD9EDE77B7B550F981B6567A89
+:1012E000DEDF16A467475B17D5170BF9F69C382F7E
+:1012F000F85C253FFF9B88C7C939C28F26E2F8B644
+:10130000581C7F720EC6F1FB229A7BD671DDD49FEA
+:1013100099AF3FB1BF2AD1DF4436D86EE1FB98E2E6
+:101320007FE3FABDF75980DEC7B4703CE4F70F5194
+:101330007D663DC74595982F73055976053FEE8923
+:10134000EDCE488355161E0F257F0073C33A2BC47C
+:101350003D344476211DCE4B99CEE5A68AD7E8BA16
+:101360001D7C9EB8FE91E6FB6D315FB9BC8FDF330B
+:1013700051D31346B24FF2B5D03D13A63A7F187F32
+:1013800047C2E50FD0B9F78917E68071037CE6C242
+:1013900055CC03CFEC06ADDD93B5AC4C635FC817FD
+:1013A0001E629EA9D06F89D63E492A5CABF9CE94C5
+:1013B0007D8FA6DEE0BA4F53BF644DFE7A37C2730D
+:1013C0000CA3388971633BC3D0DEF2DE4D34AF7BB2
+:1013D000C53ACE481E3A371BDCA7C6C9B97EFE8C7B
+:1013E000902BCCB491F6C378072F16A50475281757
+:1013F0003EFFA714E2474F3FA10BA11F74020BE968
+:1014000070FF4F02750FEB27E34DB5325D5D226330
+:10141000B99479642C4F6543649F807E7E27D20BFC
+:10142000E8E74F98314E97137886E70F85496E1697
+:10143000097C16A9F6C81625D13F7A770EF93FB474
+:10144000E7863A859EDEEEA8C8C0F8E49951F2BB63
+:101450006CEE1933F0F7AC6C99D3E9A9BE7FD0A339
+:101460001BF13CECC61CD58FC4E97E0210B9A0FB71
+:101470008D388FD3E5BF4A4773AFA97088E8FF8CDA
+:10148000E4732F46B8BE25733A1CC8A4752902AE72
+:10149000CABE4AF762809FF2CE586F90C5C679BA2D
+:1014A000CD37435162E522919FB8B76DFE8CEAB803
+:1014B000F7FD027FC56CB006E5537189CE1BA29E75
+:1014C000DD1AFE652EECF1E1796EA58C7991BD4DAA
+:1014D000603DF7A1AC56FE2253BE8972E80AE601D0
+:1014E000BBC06A0D33CCCFE98FEE6FA6F99DA3AFD9
+:1014F000ECD529742F5F5694EFA14CC4DF351A4404
+:10150000FAF9AA57CFD775485B5F6CE579342B8A17
+:101510000D218F84E1ED1EBA7F4ED9293154FD95FE
+:10152000BFCC2238B0972C447F962D53E8EAEAEBE3
+:10153000944008E9E374D8F3926EACA04568D738BC
+:10154000C9B01BF5B1F108175C506131C175B958CC
+:10155000EFDEB6C504A77704BE3A7312E6C3BC3EFD
+:10156000BC9F7145AFEAFFD0AEF3C1F2AAEBF13EEA
+:10157000BB8E4159E84A5A786ED00F4EC1DF883B86
+:101580001D8179C934CF7710FFF2960AFA9D231096
+:1015900020B4BEC627C0DECF277E5443727B9A8E0E
+:1015A000F24413E9EAD7828F2DCEE1FE3C9BFBAAE1
+:1015B00019F87B6BB1F24CA2CF6775DCCF1AD471EE
+:1015C000FB52CDA300C5C183765D41AEEA67EC64F2
+:1015D000F3505E3B74947F27EF4AA27380B243A11D
+:1015E0007CDF4E6BB57D35F6635728BE31479E399B
+:1015F000887AB3D1A19B8A7AF7E1DDF70C629E87E6
+:101600009CA330F41775DA15AE7764EB282F4A7176
+:10161000549B301E52643D5189F03CB8EBFBE4DF33
+:1016200090BF277235843F492F50D6C95AA8FF6012
+:10163000B622EECDF0D596A60B57BE07ED9F9A4F7A
+:10164000D18F72D87ECE8CFA8AC7BA82FC6969B90A
+:10165000DC2ED463DC0BCA4FAC3BE740BEF5D6AE04
+:10166000F5CE7CD49F430AE920C57FEEC8A2F3DD06
+:10167000BB0C74FE5C856B5E50D1C4CF725AB565ED
+:1016800063421C4D9F70FE2709C7A7FD5EC7C2714C
+:10169000EBD1BBB9BDC65C56B277D27225EEE7116D
+:1016A000656B2EBF7770AF3E98E505F81CDAB52262
+:1016B0000FD775FE9500E5DB8EA6EF7F94E311F85A
+:1016C0000B9A75748F69D88CF9B74FB5B134D4EFD4
+:1016D0004C2185F29FF7087E5668E5F4FFFB5C4ECF
+:1016E000E789CFC21EBEEF94E7924216C49BBDAFFE
+:1016F0002C087432E9F5B9CC03F2AFD0EE23FF61C8
+:1017000061AB210DE3F8737E62253A39674D223FC4
+:10171000A1D29AE4C5F71DBB2B8AE3CF3585DAEC5D
+:1017200069981FB3BBCD94867C2A340A7F1DEBD009
+:1017300051DEB047C7F3DABE25E6F5AD5C0BBF4717
+:101740003997F3992795E0029CE793804FCC573E59
+:10175000B891EBC36BDB4D348FB56F8D25BD6A340B
+:10176000B83DDDE64EC37BD8776FD465A1FFA8B244
+:10177000BB7003DE47B0D6C6EF6395532692BF9386
+:10178000FD42CF507FEF489EE15D1AC7DFE5949997
+:10179000C54857B21CCC42BF887F67D5F598B708BB
+:1017A000F8DB86E5BADC89D7635EE35E5B300BF37A
+:1017B0001C03B95378392DB80DF31CEB73CB783972
+:1017C000279885BFE7D4925BC1BF1F17DC86E5D69B
+:1017D000DC19BC1E7D4FC03B83B9575D1F84F13AB5
+:1017E0000CDE7A64C83F86F997C0FCFBC4F33E0167
+:1017F00017B5FE057C0F70DE2F9E89F52F89EFFA55
+:1018000047A97F55D40F8CD2FF6BE2BBF028DF1FB6
+:1018100012DF1D1EE5FB37C5774746A9FFB9A87F34
+:101820007B94FE7F29BE1B1CE5FB5F89EF7E3DCAD2
+:10183000F7BF11DFBD3F4AFD87A2FE5F13FA3F2AC3
+:10184000DA47C4FB02DBC60FC3407705C047902FC1
+:1018500015DB363A719FEFEE2A27FAEFA8E0F11D6B
+:1018600095DE0BF07794A0FECB5C7E3FE89782FF7D
+:101870006E17FD031D3E8C74B7F61D99F25D3A7428
+:10188000DE5321E4A31B74A40FAC7D8BDBE76BBBA1
+:101890009550FC3988ED09F35F2FE6D729E6DB9BED
+:1018A000CBF3A98D6E775A6DBC1FC9AE2D637A1428
+:1018B000F25DE0DF943F5BDC5DD5550CE5314E1DFC
+:1018C00069204AA3298CF72228362117ECE53DC56B
+:1018D000383FAB42E7C1158712DE8BDFBBCB49BF78
+:1018E00053E7D76955E85E2CD9C6E5C09C9FCCB4B8
+:1018F000A39ED5C902833EFCDEAD90FE7EB0ABCC8C
+:101900008E7CCF605B66C7FDBBD6C3F77F75537116
+:1019100012F26BF9411DF1EFC376BEDF77BA75E4C1
+:10192000B700B942E74A805F7B51468C67E1763A5F
+:10193000A7F0D04B8BB95F8FD94A2BE8DC861A0F02
+:10194000969438FDFF04C207CF4B0839A2A07C81D2
+:10195000E793E5E2BC4190FB9FF214E61E13776E1D
+:10196000F244AECCCF63280823E84BAEA5FB8172CE
+:10197000D7291AFF7BF65DDAB221416E280972651C
+:101980006C17F0C938B9931FB46BCAEFE50ABF9959
+:101990009779517F9DF3938DC40FCFA17C9346E738
+:1019A0007B51FE2BF8F193E2BE9B2783FCBCEEC17A
+:1019B0008D653F477CAFEDD6D1FDCE97CA47B7E7DF
+:1019C0003282C3B800C81DD467149685F6D237C1D9
+:1019D000619CDEEFA4FB0BBE011EE31E2D7722BF30
+:1019E0001D175048EE0C931BDF00AFE725EFFB01FE
+:1019F000C4A32389EBD576BEEECE7417BFF7479C00
+:101A0000039485BE76BFF0832B29733CF8531C9D4D
+:101A10008E162AAF97BC19D742FB07A4801DCB476F
+:101A20009C495CEEE424111DEE455D86EE2FCCF45E
+:101A3000A37FA42F6450EF030CE3FFEDC33C19F523
+:101A4000BE4137E967A2FCE0F5D5D85EB14F4295BB
+:101A5000B328AFE761FD95D0DEC0A2EDF15CD3B352
+:101A60008775A2BFCD0FA3BEBA2F8969EE5BDC8755
+:101A70007E742A6F7D18EF4F84F1AE95C1069BFEF0
+:101A8000C4130F5BAF88CD676AE8A987DB295F9530
+:101A9000DB250EC6EFC33EED8924E37601FBC4933C
+:101AA0008776F9AE13E99ADF3F13ED5344FBA68125
+:101AB000A1A6E73CD4BE88DAF70F2597D0FE1AAA74
+:101AC000886F9F2CECFDB8F6255FD7BE589DCF736D
+:101AD000BFBAB184B72FC3F6673C9174CA3D499829
+:101AE0004FEAF0FEA77F5DFF1345FBD3E15F51FB9B
+:101AF000332C923E399FBEBB3A0FE8F8ECDBBFAA0D
+:101B000010EB4E473D19B8A20FDF277B98B877AD91
+:101B100085F4E73E538F1DF535B3BEC78F7CB710F4
+:101B2000EF4F9A1E7BCECA2BE47A55C2FB3E134B75
+:101B3000AD457A6CD591FDD2671A2C2B417DFA65A3
+:101B40002B6B87317479EBBCC807FB236BBD25D0A9
+:101B50006E67F64CB22BF6195AFAE89CED622B9D93
+:101B600003DD69EFB1E3FE313B7AEC184790EFE615
+:101B7000FA93B2C41A780AE929BCB67879DCFE9DDA
+:101B8000EAE1BF23D3FD867523DA01DD7A6FCF78D2
+:101B9000D4B36D0AE5812B4B06E6D1B9BD1FEB1816
+:101BA000F177585715943B1B75742F7C9B67C9328E
+:101BB000842B53FCFE2AF82E374D91F01CC4FD8A6D
+:101BC000DF84F10BA3D0DB767AF9EFAEAAE36EC81F
+:101BD000E3F269431EBF1FAA7BF173C56FC2773B57
+:101BE0005BD7F6E178E6092686F95E3BB34F76E3EC
+:101BF000B9CDC7DD60F1021CAC0D3AFA5D94C76B3C
+:101C0000A14D0AFA330C1A7FC5F3521FB50F36EAFD
+:101C1000C84EB0961834FE8DD4069D0FFD8E3B3C09
+:101C2000817B71DE53DF51AEC5F1DCE3143BCAA703
+:101C300007DDBF36E9609EC9E5DA7EED33B5FD38D4
+:101C4000ABB5F5AE5A6D7DFA426DBDFB364382BF32
+:101C5000465BBE888208E1083CC00A72288957B1F9
+:101C600024EB79FA5DAEEEC0F69EF1B01EA32558C6
+:101C7000FA26CC37696212D9FB0FBC91849B0FF80E
+:101C80000F23BEF3C06446F9A78772BEEF46799A68
+:101C9000089F9DD9065AAFB510E0998FF6FA29FA38
+:101CA000FD2C2B8B6B978FF0F16DCF9BC6CBEE0A83
+:101CB000F4CF31E283CFABFEE31BF8B9A69DADDCD8
+:101CC0002FFD601DCFCFA31554E0FEE6ED93F1F795
+:101CD000BCA6A0DFBEEB0ECC3B4C846B06E6E3C893
+:101CE00031FA58AF9E23C1538C159C2DE3BE3BEEB9
+:101CF000E174F2933C2EFFF7897B0FA2ED711FA6D2
+:101D0000336ECA427FAFE6A9FE079E97BF598DC7C3
+:101D100088325E1788E57D879DD7E27EDABCD05990
+:101D200086FBE901A197A5641B7C1360BE8F1C3163
+:101D300004A5CBA0ACB0C37A90E7FB9C7C5CC35BF2
+:101D400049413CD7F488BB9CCE497D24E6F542A5A9
+:101D5000F7BD5ADA8F0AE5393DE2F29ACBB8BE8177
+:101D6000774A33FA4954502D0ED696919DFA88CF72
+:101D70006BC6FDFA48B6D78C79C2E64CC58EFBD847
+:101D8000E956E8BEAA474C013BEA2D4E1080F83BCD
+:101D90006D869C9EB9743E0860A8ABE0210126F2D6
+:101DA000E9309F2D55C06BA77B991DCF91BB0AF7DA
+:101DB000FF1DFAD553B1BF64FE1DC2C921E0743CBA
+:101DC000CFC3F38345FFA9CB5EA0F6F8D75911D74F
+:101DD0009F97D397612E0BD1EF8D89F1D57EA2FD10
+:101DE000331FF9EDD7FF9CC3AD3D87DFD36358C3E5
+:101DF000C80E7BA132B0F720C2273389ECEC2C77D8
+:101E00005615D247D6916D0BF03CC0FA9F73F96915
+:101E100058CEE34D590A335D85EB4E0BD8118E89B0
+:101E2000FB30F370CF7C2436152F89FB3253615D74
+:101E3000B273F8FECC74BBAA8AA68CB04F13F641DD
+:101E4000E691A1EF61FF89FB7587E56829C2E5FF8F
+:101E5000029F8BFAF4008000000000001F8B080036
+:101E600000000000000BD57D0B7C94C5D5F73C7BB2
+:101E7000CB26D9249B04424248D8CD8D402E6CC23B
+:101E8000C588A84B48102DE2227235E2131220407B
+:101E90000201F46B6CA9590C372DD6F0360A5AD4CE
+:101EA0008D058A8A362820566C978B8AD56A5AF512
+:101EB0002D554B13A18A728BA17D3FDAFAB6DFFC58
+:101EC000CFCC24FB2C89D27E6F7FBFEF4B7F7598E0
+:101ED000E79967E6CC3967CE9CDBCC3266632E3B54
+:101EE000A3BF7F98F1DFAFAFAFD53AEE1F369A317F
+:101EF0007F8AC5B3C3C5585AE87B37FEFBF708D4C1
+:101F0000356672FD2393B151AE78C606E279BDCB3A
+:101F100057C0D81E9B73A26300635D2B98E729FE10
+:101F20007DE94B9BE6BEC5EBFF95E67046F056A9F2
+:101F3000C79ADBF3F97376401F86F6DB2CFA93D150
+:101F4000FCFDB6E383985F632C229AD5B7393854E9
+:101F500026A6A3FC07FEAEC738561A6794CBC4D892
+:101F600018C678170153F2BF5EB60D1992E7F4F068
+:101F7000FE0229ED76DE6F9BC59967E1F59CA1CD48
+:101F80000F59AFC53C388CE368DA5E56C2D8B34708
+:101F9000F9B883517DE4A1320B7F1FD5F3DE8FF7B3
+:101FA0007B4C26597FF4A1B2218C0D39DAB6C6E1FB
+:101FB000E4F31FDAFA909DE32DF257E2FD045EF799
+:101FC00067012FB5433BF8FC0EA72FA1F937FD2E73
+:101FD0008245F0760566CF56D4D947916C07AFEFAE
+:101FE000DA377EB68BB76B8A19EBD2F3192B73698C
+:101FF00034FF525986CFCB6CF3E81EC7E5CFC74BF1
+:10200000BC31E639DECAE95BF0631B7B80BFCC05DF
+:10201000DCA0576B64E029D0B7790B63498C553B42
+:1020200005CDABF73F907E88972FC74CBBCDC5F150
+:10203000541D53960478522F31A62772BA35DA9977
+:10204000CE71953AE0058D71F8860C383A8139C029
+:1020500037ED6B9C28EBA398AEF807F4BF6461FAE8
+:1020600028F4E7A5FEF0674F02178ABFB5093A5B6F
+:10207000C3E1F1735CEF00773AA33AB542FE8FE417
+:10208000326F47AEEC27037CCA66B7F1F12A8107AD
+:10209000DE8F8DD3C45ACC4B872518D147FB8512D0
+:1020A0005F66BB23681EC94BE7EBC7A95F87E56C7A
+:1020B00087BDB79D3D60217CB05A16C8D6084FFE3B
+:1020C00008D4E312A8CEBC5ED78024F03F23E4A658
+:1020D0005AD8D1083E2E712F5F3F292C48E5E31CCA
+:1020E0003D8E4C344A8BFF349AE111031F3FC5D813
+:1020F000E450BE56E5C57413CD23ABC134F014C70C
+:102100004FDE914882C3B2910522F96059A007A71A
+:102110005BD62616B0B8D1CE36F05422BE73D17736
+:102120002EE634311AAF6D04D6D5D6D71D9B581C78
+:10213000D1F74E1F1F6F6B14AB01BED4788CAD214D
+:102140007C6C768971B7353A898EEAFD90DAC36185
+:10215000744C30D051B54BBD3498E8D9DB6F80FA60
+:102160004D6DD84BFC907A295DF289EB1BFACFE8D4
+:10217000A7FF64FABEFFFE87D0F88F07DF8F9FCAE4
+:1021800051F1A3AEBDF13E5E465A9B7D9E3EF09C52
+:102190007A57883CE3FF1F7980D7737BEB0A2F9136
+:1021A00056EF80691CFF91779B3CADBCBFAB8E1B8B
+:1021B000DB4D767F108FF5D8DB3E38603ADAD78971
+:1021C000F6D79C36B6F74DD817D65EC077FD256397
+:1021D000BB70FA84C3CBE11A382304AE89F608C376
+:1021E000F7B32B2F836BE0AC10B86E4836B6D7D759
+:1021F000F40DD7B77223BE162ED5EE96922B6B1721
+:102200003E8FE99323FAC1BB683F6BF695F57B7B64
+:10221000CDD7B7BBB3217C1CBFDCAFF8DAE2EB381B
+:1022200011FFE04B20B1C1E48D8C65CCC9BA18D642
+:10223000D1C9A12E6A97C09CB49EF9C2D7B0AEDEB8
+:10224000C33F53F856E0F69D738D01FEBD150FF3A5
+:10225000A66572BF6253788F57A3735FC1AD0597B0
+:10226000F31F63F7115CAF68BACE689FB57B76F059
+:10227000F59D97CAEC2909FC757220E3D618C6BEF5
+:10228000EA91D75CD470384748DC3D37B86D653C7F
+:10229000ADF34002E0F967C7B5BBBD66F798DEF65F
+:1022A000E1ED7ADB0B3CD96C6D2B0067579DC38346
+:1022B000FDE17DBCE2DFFD786644D0CCF175C1EA7A
+:1022C000D8A87139733C7ADEEB03391EDE8BD5E377
+:1022D000D1FFEC5937AE475D3B9CE85AC9E1BB5092
+:1022E000D9311678F546EB03DDBCDF5ABB3E3489A5
+:1022F0004FF15C9A3E2C0EF8F525125EF93F0A7CF0
+:102300007DC22FE029D304FE13E3F474F453666A0C
+:102310007FC2876796F6B1F88E3907127CE76C5C4E
+:10232000DEF5B1FE151E4A653F87AC9EAFBAF8FCDC
+:102330000E6D8EF3347178AB1367CD5BCE5F2D30AD
+:10234000F992826603DCF904B7A372680AE0B64A20
+:10235000B8ED0325DEBD595F077713C6C3BEF63D52
+:102360002DB0C32D6889FA4BFEF8C003BC1E61BABC
+:10237000F83EE4475781C9C3F708B68DEB1776BE20
+:10238000AFBC2BF1FD38577FEC09F47C239E274727
+:1023900089EF931F31059AF8F7BED297894E3F5EB9
+:1023A000E6F098F95895CC6503DF5631AF0DF0FF94
+:1023B00071C2DF5EEDE0F3BBC9AD97833E77269A2D
+:1023C000D2DF2738F4BC699CDFD87881FF6FE20741
+:1023D000C63699D858C66E95FAC10289C7E9CC6B42
+:1023E000C53833986EC5B8BF396FF332CE1FBFE121
+:1023F000B8621CDE59CC4FCFE7B00095B7B320B51B
+:10240000BF837550FDD7D185690D1CBE695B86659C
+:10241000633D86E0FD76C92F770E10FCF2D920E0EF
+:10242000BD65E015F1EF344DE06FB05BAF76D37A68
+:10243000750DF00026E7C421BE9890F5533650F094
+:102440009FC599FD75EBA7BD3BB6908D2479E048FB
+:10245000E178B84192F206EFD229982F2408D6EB02
+:102460002D72BD969B1D6C00A74BBBCB1C88E0B0AA
+:102470004C9EB02219F37D630DFBD5284EBF372645
+:10248000985913B5F4D27753657F53874CFA1CFAE9
+:10249000C9DB2C386034FFAEFC927E348EE367AA31
+:1024A00079F75AAE71B3C943AC9F7484C8B51B07A2
+:1024B000ECB130AEBFDC94657C3E259FD743E4EEA3
+:1024C0005466E97DCFE97F08F881DC61CD66F0EFE5
+:1024D0004677CC804FF37875041B21EC034E8D902A
+:1024E000F974DBFF6EBBC0BF7BC5AD3F04BAAC8CDB
+:1024F0003F3F8FF40E8B98CFB277CCA4577ED2C8D3
+:10250000C079EC14D70FBD398C7DCAF50BD44F3789
+:102510002653F905D707509E6DCCA5F7E71B3D5410
+:10252000FFC4EDDB8A7EE76FFCD2827D6943A4C2E3
+:10253000B7806395E4BB0D6963B7FC95E375C3DBB6
+:102540007C6170786ADA9A2771358BAD4AFBE43E7C
+:10255000E8CFAB9ED63C68B7F4A0D7E6E0F02C38C5
+:10256000AAAF079917BDDD311562A20EFA2BD71B52
+:10257000EEB7FA7662BC311F9C4AD27903EFC1CE26
+:10258000D71379FBCF1A4B08AECF1BBD04D799C622
+:10259000C954FECDEDDB8DF65EF6A50DED6FDEDDEB
+:1025A0006949E5EDCBBD9A17EBF13A2F0B04383CA6
+:1025B0005BAD42BE6FE5F21DEB7342C1AD8FDF052F
+:1025C00071E1D6F7830F6724549527F2E7534B2A1E
+:1025D0002D6837EB2B2ED3DCBD7CF8CDEB50E0A380
+:1025E0004ED2E5DCCF35C2D3B9FD79B75CC3FBFB76
+:1025F000F931333373B8BA2F9908AEEEE35101289D
+:10260000ADAADDCA7D66D22757A6D902C0DFCA7D32
+:102610007983A04F9DE1746339BDE39D79EEDB2E94
+:102620003D448E9E4968FBAF0F21A77E2FE414D74F
+:10263000373F7D0C726CC8600FE87EDECAF57220F1
+:102640009AD547631F5B6693EB8BCB19D4CF44318C
+:10265000D247C73E9F5A8AF582F15CB65E3994F341
+:10266000FC968CEFBA7AC7DBD5B6E0C3C778FD5CC1
+:10267000C0E4B7F27DE61C6B3BFF33C8D1ED0E0F13
+:10268000EC830D1A8707FBE88EC154CFD52C510D72
+:10269000C4CF015AAFB99ACBD2C0E54FED0B8F0E24
+:1026A000063FBDC27150C2DFBFB2399AE4D32B5688
+:1026B000CF8906F4F7B8E8EF273FB8E79303281F60
+:1026C000AC2BBE879717DD09D44FF57F2C1E81EF09
+:1026D000F93ECD52787FCFBEA40523F9FA2C683994
+:1026E000745F0A876FE4B64ED3605E166DD79A505A
+:1026F000E6A5DD74CCCCDFFFC5ED1276EB6EB73905
+:1027000015CB6A70E0C3EB69FF36EEEBF92D5F96EF
+:10271000C2BC54FBFB08ADED8B56D8C3E9C78B7523
+:10272000C25F33C1B1EFE0F4F76E679807D71C00C2
+:1027300077A5CD43FB49C0DF0A3A9FD3733D0F60B5
+:102740004DFBFC8F82BEE7F4240FF697FD267FEC4D
+:1027500038B43F61A179BEB4FDD7B1565E8FDB6B53
+:102760006591FC7D5D51D724B4AF4B73911D9EF6EE
+:10277000C40D93819F657BF7B5523FB5768F867503
+:10278000B6EFE2EBA9B0876E649E6CF0DD5E51FFA0
+:102790007E99D7037EAB69FDB3A8B7FBA8EE33FBE8
+:1027A000DD16B4AF127ACE16B98FB18E429277C4CD
+:1027B000CAAE5E7A7D9FBFC6FBAD6E7F4ABDA37772
+:1027C000FFE3FBD6900CFE3EC526BF774E4FF7FDCC
+:1027D00013FB964DEE43AABF2D36E68FE4FDA4F120
+:1027E000E71AF6559BD86F7770F9027E51FB2D1FC3
+:1027F000371FE3F2EFBD9093A97C732DE2F349DD1F
+:102800001211A03DFD0AC7577AD2F22821CF94FEBB
+:10281000313BB1E9D50E8ED73FC5EA2519BCDD02A3
+:10282000B95F338B2719F33B19EBBD3A83F6BFAE83
+:1028300074CC81EF87D7A2BECCCCF5A7CC10FDC954
+:102840007E65FB61449C7722BEBFD2F6E3A3FA9675
+:10285000BFE3BB4B48FEBE2AE5EFAA3F9B5811AF32
+:10286000AF7A3882E409ED697DE0E555BEDE752E6C
+:102870005F7E01BF012FAFFD538799EC8FA3A6DACE
+:10288000D7F97E4A4367E03F5D4D71A3A9EE0599F4
+:10289000AFFB93A94FFB50959C4E95A093F72BA3AC
+:1028A000BFE1FAAF9C36EADF917045F335F7335F4D
+:1028B00073AC98EF41CC97D36ED597C5242F0F5E9C
+:1028C000E13CD322BC2B015FF83C38DC0DA047383B
+:1028D000DC3DFCDD756570DFAD31BF09EBEC4B5BBA
+:1028E00000EBEC200713EBF6E0E2FC00D6F37E9B56
+:1028F000A8FB636DA47F1E8C617EC88F83D3920278
+:102900007EECE7680FF9309089F791F2FB3949F4D2
+:10291000FDE008CEFFBCCE6E8F92FDD7BF5580F78D
+:102920006B523D1C02AEDF063666907E6B26BFE121
+:102930007129AF5BE283B79BF9F3962F7318C63901
+:10294000CE82A9CBD1AE268AE4504BBC372581E399
+:1029500071FFDFCDB42FB414F1BA83E434F9775AA0
+:10296000A67953E2797DAEA44B4B6B60C723E86F29
+:102970005AAEC7CFC7196C66F5D4CE2DFAF9D02A56
+:10298000BEFB9DA40B5FC7B4CE8F66CCDF03FCEB10
+:1029900053A32DF08B708CA7681CFEC7AAB319C96E
+:1029A0004BE9F79A2D6930B7970FBCF6B1D06BC5DC
+:1029B000DF9C053B22218F67D444925FEA78CD7D6E
+:1029C000312E3EDE0CDD1C8C80FE775BB9C1EF74CE
+:1029D00034C34BE372C342DA09C12AE0F1E75D7602
+:1029E00006B9DC1F3DEBDA26249E0AE1871A9B908C
+:1029F0001FA7A53EF4728CFE0BF0CDF20337269E86
+:102A00000AD1F7AA1794E7407F56E37D13DF34819C
+:102A10004E2369BDFA4DE08FB648A2FFE45BED445A
+:102A2000EF6E87E929F825EF94F2AA0986307FDE58
+:102A3000B42F22701F7FB63C223813F28AD3FFE9ED
+:102A40009DA0EBAB9144FF5A9BE0A7DA9FE5117F75
+:102A5000EDB779DDEBD0FFCF2388EEB5B1AE387A94
+:102A6000FFCB4426F98FF486DAA8604E3CC7E7C650
+:102A700068FD43E08DF31DF9836B6DE2F909C957D9
+:102A800027781F80C35F1F43FCC8645DFF6E22D997
+:102A9000535C1F25FED51FCAA3BA6EF3A62CC0FA3D
+:102AA00058194DF09D90FEB413B5F1C4DF150F2DEC
+:102AB0007D9B717A9EF0EDBC3F87B73B71D0EAC138
+:102AC000BEF471833968E3743DBFFAE4D8ADBCDE6F
+:102AD00071DF47E97A881FADE2BEBA29F8AE62C954
+:102AE000EAA9D82FFBC377456D0497B9BD74B266C8
+:102AF0007AFF04FAB933F5FF8D792ECFEF5808B974
+:102B000077DED6FE04EC830FE3F4BFE2FD85973F4A
+:102B1000DB49F2D0D29503FD7C9985F301F852EEA2
+:102B20009FCB255F063275963986F047FA78747E1A
+:102B3000BB907BABAF4CCE7F7170C77E8D8FB334B3
+:102B4000EAE0322ACD8142F473460BC66A99C01F6F
+:102B5000D7E3787F679DC158D0419776D3D25DC6C1
+:102B600079E10F7E95A5F807FF6E699B99FC2A1CF9
+:102B7000421BE05F0A4FAF219E20E40AEFE7295A8B
+:102B8000878E8FE77D97E37FC9D3C38BA14F2E8DAF
+:102B90003FF0836BA81DFF4EF1B9F9F2BA9ACFE569
+:102BA000F088F99D957C7E96493938DBD66387435A
+:102BB0000F3AFFDC2003DF9C7F7A38D5BFD0BAB450
+:102BC000280ED779298F98A76DEC341810DEB6B18E
+:102BD000D0671F91CF9726B68D85FC51F288D9DB3F
+:102BE0000AC9AECE6D2B843DA9E419F3B5E5D0F347
+:102BF000405B0EBEDF6F127E0AFAC3BC9F4D6D258F
+:102C00003CD8C57A5CF26C1EE1458D134EBFF0F9DD
+:102C10005E9F29FCDC1CDE3B7DBCFDB0AD36C3FBFA
+:102C2000E10163FD06D97E68185D069BBB0E454039
+:102C3000DEFF98D17A0D1F77AAFCEE99677AE860DB
+:102C400096F6227329FABB84BE6D05BE7FD783EF4B
+:102C5000BB52B93C5D8A3966F4CE7F7F919E0AB93A
+:102C60007FDE24FCD4FBE3793D1F7A8EC0A7AA2B1C
+:102C70003C86F3D17DBF5B988A78CA3D9926A954DA
+:102C80007A0681DF9A202FB9BC68B20A7C7CD158C1
+:102C900033EA9405F6687D4AB5A5773E0BB716D999
+:102CA000B15E166D2BB2CF0FB1779A768D3AE6E210
+:102CB0007439BBCB426E83264BE007D0A39B769939
+:102CC000DBFC8CDEDBBDBCFD59C7E177D06EE1B625
+:102CD000F862E8BDEAFB455BEF4EA90EC177DE2E38
+:102CE00023FE0BDA8C75F8A343EB4DD005C7FCF33C
+:102CF000DF15058DF551C78CF5CFDEBF6B26D8F8F3
+:102D0000A512C1EFA7033101C4A96A3E9A740CFB56
+:102D1000DAE9FD2FC5823E4B7F5FFD3AEC96455BBD
+:102D20008D7CC6E9A641AFF7EFD4883F1607C2D71E
+:102D30009D5CEF97ADC735CAAF991BCA27E1F43C3C
+:102D4000C3DA667A393FD536AC1C857848CD14CEC7
+:102D5000B81C9EABDB36DB1037081FAFBF75CF1C2E
+:102D60005E17FC559525E2DDB8865276124EDF4D92
+:102D7000BF9E84F556F97D8DF6FFCA17871D85FC29
+:102D8000EEDC33E7262A674E263C28FFD9A2835A79
+:102D90003086D79D25AE031DFCBB05018DF687F956
+:102DA0006B237AE510FF7FF5A630385A42DE73F8C0
+:102DB000171D38F4178DF75FB3CDF8DD628E2FC87D
+:102DC000FD25DBFF1111FA5CD97DE30EB69A31EFD8
+:102DD000050A7EFF750CF31221482E3AA4BE720A32
+:102DE000152EEFA3137C8732F9FCC7B588EFB8C066
+:102DF000AAC47CEB1C3617E65B6767C1680EC7B1D7
+:102E0000189BD7C99F5FDC1A43FEA985115C2F2C44
+:102E1000A6924516E33B0FEDD39FBE6B267DA50E14
+:102E200063A39F2735B27FEAE06C44FDC7A2BE983A
+:102E300005691EE0176FE8FC02C63A6B167653ADC3
+:102E4000257808F858C23A84DDC3E9E80D89C7D56A
+:102E5000F2791E4F803E64FC7E396BA3F6CB0FFCEB
+:102E60002322F479889F94EC3965579A6DCC0BFD39
+:102E7000D87C6F14EDF75C1047813FD769DE47EDD2
+:102E80006694625EFECD42FF99DB2AF60BAE9FE6AA
+:102E9000003F2D9B877BA0A7CCE57A7624F488C5DC
+:102EA00051D4AE259E917FA5654E8ED0B3FFFE62B4
+:102EB00010E3743DAC917FA4A548F4DBF2E0707A96
+:102EC0000F79A8D13811A4B7B44C53EFD3484FFAB7
+:102ED00010A0A540CF95CF07BAE8F960B33707FA3D
+:102EE0003AFB6124D9FB4AAFFD4982FE0FECFB6A35
+:102EF000BE4A0F663557A6FFED90FB5DD76611FF02
+:102F00003DA5F95E3785E8A5CE2C21E7C7967A77EF
+:102F1000CA761407A8364D7BE07A0E4FF523265764
+:102F200093BB17EFCCEBCDC1FC4F6D8E2C069F8D64
+:102F30002D15FE9E1345426E478F66DE002F5364AB
+:102F4000BF29592643991CC5F98FF773AA5CF887E6
+:102F50006346FBC8CFC6753692DFE1F3C896FD54D1
+:102F6000DB7CBFBCB60F787AF8A04CE819A756688E
+:102F70004F09B8385D797DEC7F44927FEE94DC5741
+:102F800014FE39DF8CA17D5AC549259F6C06FDB121
+:102F90009F2D1676502F9F18F960AE26F0CA1E148A
+:102FA000FA694BBCA82B3EE0F60EFB2BF8A49C1153
+:102FB000DEFBB37BD43C5B5AC57B4EEF6BB3C65C88
+:102FC0006EF7287A334B600CECC6FEE83DBF247EDA
+:102FD000AC66A2B8B51F716BEC758497FB2D81FBB5
+:102FE000381C432C02FF6916C15F5C2AFBA38AA927
+:102FF000BDD7C6EB953F5CC4BCBC7D652A237F1062
+:103000006FCFE2D09E7763867F8497F8AE324EF41E
+:103010005B3988919D407F5C5E65A1CCA07EBDA69A
+:1030200004F17D6C317DEF3789EFBD165E0ECD1456
+:10303000FA7CD7BA88C05390CF1BD272C007534ACC
+:103040008D7CD026F94695A9D92E95E7908CF53D33
+:103050007FED70DA2F9A227D75FB40B7E784FE5F23
+:10306000B9FE8E9BC700BEE7133D00EF8BA97B28FE
+:10307000DE307FED9CBB3F80DDB02B929E9764EBF2
+:103080004BB3A01F6BAE79FBF883F9338ED892F95E
+:10309000F77ADBB4733FE3E554FF9E77A00F4CBD96
+:1030A000CD4CEDA732E11F656BC53837FBBFB424AB
+:1030B000F3FE6E1EAF51CE4067A4337D05F2162499
+:1030C000FDBE0DFE851D16C966BFE0005C6939199D
+:1030D000FCF9CDD030FB885FED93FCDE3441DB069C
+:1030E000BD66E844B1BE547BF4837E5FC9127AD0DA
+:1030F0007DB254758E576A5FBD31A2333316A53544
+:10310000380CFB5D4EE97AF0D5940C36692BF07ED5
+:103110008F19B90A1CDEAE4A5AF731392EF0A9CE02
+:103120005890F22302C389AF3B2774756EE0F5CE49
+:10313000D6611EF2F9483B7A01EC2B17DE0B39A65B
+:10314000E4CB0967470CF1ABB4ABAB246BFCB161CA
+:10315000E22357F1F6550E5B27F683050F4F8F4597
+:103160009E49558B59E4736C32DAD5DCFE0D00DED6
+:10317000703B39DC1E06CF808FAA3769C487439B1A
+:103180003CB61492639A13F3AB7604B320DFAB3DE5
+:10319000911EBC3FDBE84D3C958578C4642AD95725
+:1031A0001CEF63E18F6594C4F162B6FE1CF8A1B216
+:1031B000B992ECC5E87C9DE4D3D92CC17753E04F9C
+:1031C00084BCB174A4601DCE53CF139C390EE2E7CA
+:1031D00048063C745A9D3980AB735DA409FBE694A4
+:1031E000FB045FF37566B7F0EFEFB7B028ACF7EF0D
+:1031F000E27B3E5EC51A8BAF95D787D8992526010D
+:103200007C55447C9D394CBF0FF09CFE1E2BC1FEAB
+:103210005FB56933C1A3F88259DACB12A1DFED7033
+:10322000173FC07AF9287358E951E0AF871F6ED372
+:10323000880F78792893F8E1D637891F4A83592B6C
+:10324000F311C7AA655EC411929907FE806ED64538
+:10325000FA4437D72720CF943C517283F3811779F2
+:103260003D8ABE4A7EEC6CE42071BCEE6AB453F930
+:103270004CA39359B80CD8DD984CF5E71B5D54B6B8
+:1032800035E6D2F3171A3D54DFDB5842F5FD8D5E6B
+:10329000AA1F689C4CE5CF1A7DF49CE385E49092CC
+:1032A0002B4A1E297E5272299C8FE671F45E574C80
+:1032B000DF93DC53F20EF33015F7CA2345DF0CCD54
+:1032C000E74F76438E75CC81BC28379F7DEE25F87D
+:1032D000496A1C9E0817F022E45EB7C34E723EDDB9
+:1032E000C60EC05E6F5AE1EDDC10B2AFDE5EA331F8
+:1032F0004B089FDE511FC92C217C7C6743BCA15E1B
+:10330000D1F0DE6B8378FF5ABCFEDFA0CB897B3F18
+:103310007DFCB7FCF993F77E910D7A7338766CC11A
+:10332000B8ABA37AE048407DAD95F487A151C20EB9
+:10333000C21FE8329F89F5F9E4BD7FA5F5DDD910FC
+:10334000E132F376F31B22085F1F824E1CAF1F4B46
+:103350003A55AE3BF9DC4B58E7AB6D24E7E6AF9549
+:10336000EB7223C76788BEF6490A23BD4CF3328649
+:1033700038CC27DFB305F99ECF3ED1EC010DBA0F53
+:1033800037922AF8737DE31B947FA5351C237D5863
+:10339000475E16FC047EAB211F4B6B90795A1D4390
+:1033A0000C7954D1A3BD36C807F034E8363FF73066
+:1033B000C3BA66CD9A135B40B57C5EBD51237DA335
+:1033C000475FC836131D2BB32C54FE026B9CECC513
+:1033D00066DA9F14BF7279E10D605D3417D91686E5
+:1033E000C8E1F9F27955AE894AF5BC32CB46FDFC0D
+:1033F000028B91F7FB406E866D01C939970D7240C3
+:10340000B59F9F5BBC3E6334FA99308085ACC7A200
+:103410006C0B7D5F89442FEC5F76E1FFAFED671F9A
+:10342000507AC969FCF36A829FECAD25CF3FFB3C23
+:10343000E2634B3E8A203A2D1929FD11F981B1D35F
+:10344000499FF13A343ECF6592FE65CFFE3EB6838A
+:10345000BF5FBE57F82F79D98972D9EA1AF26B2D5E
+:10346000F3F0F59100B96A8C231F7DFEA3D80EB24C
+:103470002BFCA9C82FE4DB422A4B46BCE8E424F825
+:10348000C597B3AEF5C8EB0AFF6EB9F655ACF0EFD1
+:103490008B38B98A5F96BFFAE7248263DFC524C8F8
+:1034A000B5E5AFAE4BD2FB98F7F2B0F8B58A9B2BDF
+:1034B0003FD872B6E94BC4DDC2DB5565C70C00FFCF
+:1034C000B0ABD855E4A7B030CA6358691778E80E96
+:1034D00064C7B13EC6EB19772B17ECDC0EEDB6B81E
+:1034E000E23C1CCE0BFDE4F1EDCA16FBF93919479D
+:1034F000BDB0DB4C7AE185DD31C4FFCB76FFF0F562
+:103500006B787DD9760DC3B23AD64E785AB6D7CC01
+:10351000ECA1F60DFC3689FDC3B9F4D9987AF0D345
+:10352000E236CDBB231F717957DCC01078D6497EB7
+:103530005A1AD13696E820E1FFAED48F54BBC507A6
+:103540007F6803BD78BBF3A4B7FC341ABA36FFEB2F
+:103550007A07709ED9368AE2BA8BDBF62CA37D7F80
+:1035600077B41353FCC26AF4476D96E36DCE167AB6
+:10357000C619E9FF3DF3BC99E40FE0C43AFC4213DD
+:103580007E5EF5DD16F9DD1689B7EB10541CD3DB32
+:103590007E715B676C166FFFD981F7A86C95ED178C
+:1035A0003BDA0BB15F7EB6377A7280CA1F4D7A85DF
+:1035B0008F77AE6DC2002D645D3D9F6DA5FECE6D13
+:1035C000334F06BE5840E519B5D17CCEEC4ED5C878
+:1035D000AE05BE397ECEEC7D31D644EBD66FA0A3CE
+:1035E000C92EFCA96E8B4BEA977627F48CB95CAB9D
+:1035F0008BE3F2AE6EAFC807087FAEDAD37A4B0129
+:10360000BF77D904FFCBF8BD8C2F214F84E2F13175
+:10361000B600F6D779235DB36E873C7BCB2AE831C1
+:10362000C4B50576D5BC7713C95FB1D2EA1A84FA5E
+:103630009FDEB692FF7CDE28B9CE933BC6C03FD951
+:10364000E916FB7AED46BE42F8940773FAFBF9FCE3
+:103650006A0326CAA77C3F3B83E6F7588DC96BA354
+:10366000384730077ECA1336E637434F7E2192F43F
+:10367000BBDA0CE1777F0CFCCECBDA84604E22F40F
+:103680001D49C7DA5BF9FB107AD63E15CC81DE7294
+:10369000D626FC7878EF44592CDA3549BE413FE80C
+:1036A000B7D3ED3C4FFAE5BE18063DDFF4528CF07F
+:1036B00027FC2492E20EAADF53D942BF6F92712EEB
+:1036C000FF0E011FE082DEBCD8D69C03BD528DBB2D
+:1036D00038B699C63B2BC75B1CD52CE207322F0CA2
+:1036E000ED697C2BF3C21EEF7A3A82F4D32F52DAC3
+:1036F000F763FC2F9E1E4E71F04E7760E1017ACF8A
+:10370000F5364E8725CF440401EFE74FC7509CF3B1
+:1037100073ABD0833E8F49223DE858CC23F3D05F72
+:10372000F7F6080DFE94CF35664BC6FB1D03295EE8
+:10373000B5A4B181E2044BF872473C9A97931157B4
+:10374000FE7CC770F2B37CFEA699E28BFCF9463C86
+:10375000D759F3BCEF60DDED8A263FDB17CFFC6D58
+:103760007868FC41954BB61BFD498AFEEABD35479A
+:10377000D80DD61C81C7C81CB1CFD445B73D9241E6
+:10378000F314EB95D381EC2DBE3E92E09F3ED1F633
+:103790007292E6009E83393F02DE7709BBE68BDD3D
+:1037A000568A8B2C7929C64BFE9B0D5799B05F2CFE
+:1037B000310BFD77096737510AFFD092D81CF20F01
+:1037C000717C93FDD8B5C32CC711E37EBE334DF891
+:1037D000DF83B2BEBF20003E9F92C0EEBC95F49B3B
+:1037E0006D85C0EBC5EDD126F0051FC78BB8FD92E6
+:1037F000EF7C57E0336E21E9E30C79D063112F178A
+:10380000F2B26EC33571C88761EF9A1944DF458BF8
+:103810006710E46138BE66E74879B9FF711BE2675B
+:10382000B57CBD203F68A98C9B2E7D46237D6EE92B
+:10383000FA6BB6901C7CC7CAB2391C67DB7E181BBA
+:103840004A8FD21CA157F47EEFA1F64B797BF1FD94
+:103850005BB104CF4EAB07F084D3F18ABF7FC67C47
+:1038600045DFF7F0471BDFD70B2F9FF745D6FEBF8D
+:103870003E821CD91DE9F1D3D3368A3B9FB1B62DC8
+:10388000C4BCCF3C1749F2E54CBC58EF9F7179E8B6
+:10389000B7018E6F3D44FE8DDF4C6710DD8B02C695
+:1038A0007ED5B837E488731B75899E38C433EA38EF
+:1038B0001DD01FA7CB2DF4FDBB56FA3E7C1E393917
+:1038C000426EF7ACCFE7A2895FCE0C16F438F3FC5A
+:1038D00030DA573AE3059F7378D361A79C8917259F
+:1038E0008332C2F96089B443CF4C6823BBFB8CB6EA
+:1038F00087CA4EABF86E49838CDB72BE4B06DF8005
+:103900002711B7B26F6A871E01FFF4D8622A8311AC
+:103910000997FB99C19FD8879E94EB0B6A0DE43AF7
+:10392000C537483F69B3411EEB528FABDD7D79BC93
+:103930008CE2A0BB358AFBDCABFAE1500F50FE7184
+:10394000CE8F4BFD9A17F9464BD7AE580C7E5F5A77
+:10395000BFF976F0BB9AC7520B9B0CFBAA533313EB
+:103960003C9D917CDD000FA1E365F4E2F7FE1CAD08
+:10397000270FDA99447A2629D70FE688FD0AF566DB
+:10398000DE5FED5A6D138DE356F6A4989FC2134780
+:103990008B0D7E326EE78BF7FDCC5FC1193E7F0544
+:1039A0004F6B8ED01B3ADDAE87C683DEBF3293FFEE
+:1039B000F4E257A3E212BE462F83C5D6E32FE6F00A
+:1039C0003FCFF76AC0BF42CAB7A5F047733873B696
+:1039D00019E31FB9DB8DF511BB8DF5FCBDC67AE18E
+:1039E0004163DD73D4587F04E30EECC513EC5CE453
+:1039F000B5C1CE45093BD79523EC5CD461E7A284E1
+:103A00009D8BE7B07351879D8B3AEC5CD461E7A244
+:103A1000849D8BE77F9078AA957E47D081F2AB5E3C
+:103A20008E5471705A2F17E62491FC54F1CC0B8BF5
+:103A3000F3A9DEE3CF9966277F8ECAD3B93D4E7FC7
+:103A40003387E286EDEB5340374B07F97197FF4C14
+:103A5000F8716B8B231DF02F74ACFB6C3DD4A7C2A7
+:103A600038FD1DB4BF60EDDA29F2958224373AD6CD
+:103A7000B8DEBD5ED08FFC1C2AEFA612FB5D42FFB4
+:103A8000740C8FA3B04DC6B849781C253C7E12CE6D
+:103A9000072A6EF2A4B52B05F2FEE4D3F64D80FFA3
+:103AA000A4F48FB1D94ED2BF945EDDA37F3DA83D73
+:103AB000857DFB428EC8FBEB3EC6F5ED3EF65B55C1
+:103AC000565D2A26BDB1A7BE493351DE48722CEDA2
+:103AD00043AB244CE95A57E706C8BB1813EDE3176C
+:103AE0001D26B20B2EBE6F263D6218F4F390F90C22
+:103AF0000F4419F82B6F574258FC6FB0A1FDC80353
+:103B00001961F1BF11C6B8D46D6B0EC1BE9EBE69FE
+:103B100094A15DB5EF9A303C4AB8A55EDAB47A6BF1
+:103B20003AE4CFAA986E827FD5BE48CAABADE6F024
+:103B30007A11974385A3A0C6EE9D0AFCD5B459E33C
+:103B4000B1CF57C9FD873518F7E31A0BF33B137A4A
+:103B5000F9AEC6C9BCF1FCFB7345CD3B4D9C6EE78D
+:103B60004CDB1E19EF425CA935DDC9F9EA2EAD2DFB
+:103B7000E96ADEDFDF2C7ADA304E8F746BF00715DE
+:103B800090977B32D91ADEEEE4A6176349EF967C54
+:103B9000966E754681DEADCD66B20BE0973227F4A6
+:103BA000F2436B73625496A3779EBDF4FF8AE6C717
+:103BB000E9E2C139C56EC7E121ABA0C7B589F9D625
+:103BC0004CD0FCA427CBF9AC94FB0ACB12FDDC252E
+:103BD000EBA7A4BDA0E67776F8A14217E2988D077F
+:103BE000D2CD90E3A6DD3B717EE0DE28BD64D840F7
+:103BF000E44B66FF763C1F77C907225FF78F2D13D2
+:103C000063AF86FEF99CD53385D73734FFD806BB22
+:103C10007889256083DD59F374ABCDCBCB1B76B5AA
+:103C2000D2F385BB2AC9DE5EC4EAC98E3CADF26F11
+:103C3000253E6A4AB56D4E0EF793C384DCA88912FF
+:103C4000791BE5E6F1AF212FFDE22EAD08F3BDCDE6
+:103C5000B7C756C99FDF3A4C9E3B095B1FDD6F4FCC
+:103C60002F1F087F529B887BF6B71E660473693D41
+:103C70004CBFE4A2F2B64B23C88EFD80F90A484E31
+:103C8000E487D9B36F8B3CE4EE83621DD4D8820302
+:103C9000A6639DFCDC4AEBA48ECBAF9262D8C98CA4
+:103CA0008DE3A56FBCD9C0AFCBCBA20DFC3C9B254F
+:103CB00018E2C833716833A47EDB944C43FB59B7D8
+:103CC000E585F17F71EF7B9223E30C792675ABFDDF
+:103CD0002E8DF2594A8DCF79B99AF8EC26C3F77533
+:103CE000ECD6DE76B083B7FF9AF0CC58BB0DF65613
+:103CF0008D49E4D5CCD63BE5F30E7ACE27625887C2
+:103D000043333DBF15FBA295FCF2CA2F3D1BFFCEEE
+:103D1000EC6B5FE48496E3223F14FE05437E2107AB
+:103D200080EC4F26E85027FD3D75B9C2DF53E76FA1
+:103D3000B721FF96E3DF92CA51B2AC59237F1E6FC1
+:103D40006F4F4D10F5D578BED778DE00FD5DC2FB14
+:103D500063E64AAC97F0F7CBF8BCA1672C839F06CB
+:103D60007E26D5BFEC57F1E7A2AD46BFD132F8733E
+:103D700042E8F8C93017F1F3925D7B5E1FCCF13257
+:103D8000DD175F84F553DB36CD5A997F399F29F9CA
+:103D90007EB1C64471EEEEB78F109F75D758889FDD
+:103DA000BF091FCBBCC29F19CE7F0BF97C10975D5A
+:103DB000B857F30434D10E78190CBE0CC34B6A1FEC
+:103DC000F85278EAC15BD8FB45F8C768E40D688112
+:103DD000A0BB2FBC483CAAFEC3F0C44A8C7858A8AC
+:103DE000BBDE85BC5978CCCC025730EF45981FC656
+:103DF000E7F3C3F8B75E127E1215379879C942F51A
+:103E00001E3EF189FCE9DBA618D7650FDFF8C43A3E
+:103E100099712989BEFB9FE69F6FE21B0577787E2B
+:103E2000B23ADF737A983CFF32868DA1F57F8579AF
+:103E3000C36ABF57781E7A6F09E513753B32487F16
+:103E4000E8D96F9CC6F72B6332288F5897FE392527
+:103E50007775D94E8D53C9DFBB46818F8724C1EF5B
+:103E6000BA7E6D667A47885EA2AFB392DF347D4D2D
+:103E700022959591CE24EC17956BCC3EEC839FDC7C
+:103E80003F28A9047EF875D6015378D79FDC333AD2
+:103E90009D15A05E4EE5C9CD11B343FDD9AA8CCFC7
+:103EA00015FB46DDBDC769FF3A677A3B7636D6D942
+:103EB000BA7DB148A959BAEEBDB14EAE7AB45A74C2
+:103EC000672EC5495B773A8137676B21FCD174F661
+:103ED0007260AF9EB0645DF920F8BF6AFF7EE409AE
+:103EE000ECEFFA1A6B12F4CCCFDFE7FB9F46FB171F
+:103EF000E907A7917F3C0071AB683ADF765A635EB1
+:103F0000C46F169B0F153A0DFBE9C19980E3E528B4
+:103F1000DD953B06E3077626637C8F9FF225F5351A
+:103F2000D9717DF94B54B97CABD0DF762A7FADF4E3
+:103F3000EB426F471D7A3B8242D0DB5187DE8E1207
+:103F40007A3B9E97C25F8FB86A535711EC4E7F2918
+:103F5000CBADA7FDD5910BBD7C9516E581BC59A5D0
+:103F60007906C10FC6B6A7887D358CBEAABCB68BB4
+:103F7000EB5621FC7EFD253B0BCD1F9BC0E20DF5D2
+:103F800089F61443FB72A7DBF0FE86E4E186F7377F
+:103F9000BA8A0CF56FE55E6D687FB36782A17E4BD0
+:103FA000C98D86F6D3BCD30CF5E993E718DACFF0C8
+:103FB000551ADECF9ABDD8F07E8EBEC250BFBDE688
+:103FC0001E43FB3BEAD718DE7B99D382FDED20EC44
+:103FD000298EF79FC39EE2E5AA5F653B42E93A7EE0
+:103FE000A2A9BE2F7FFCA25CA1CFDC3FDC3B1FFC63
+:103FF0009126CF81A4C9F31C77E7BA44DE00CEED49
+:10400000933DDB9E02BE096F17FE7E7CF4E18B2E92
+:104010004EC3F6DC5B6EB370F930FEAAC3A33279EF
+:10402000DDFC74D36D162E57C65F73F8C50C5E8F1A
+:104030007EFA55511F79F822DEAF7E7A83A84F674A
+:10404000A45A243E3DEE363F9FC7F8EB33367984C1
+:104050003FA4CF7C4B55020FC85B041E5006397F2E
+:10406000A23CCCF913E551CE9FD5598CBDCEF913A6
+:10407000E5316E57E2F92FB95D89F26D6E57A27C7A
+:1040800087DB9528DBB95D89F2378DB3A97CBF51F9
+:10409000A7EFFEB3B186CAE38DF5F4FCC3C6062ACA
+:1040A0003F6EF4D3F3CDB9CA4F11243F8B8A272D2D
+:1040B000431C0F7EB803D6B3A17156150F54F1BF40
+:1040C000A67AD6118D75DA6189FFD4DE1BD7EB5F36
+:1040D000CE5AD8A721FA566BB4775B2EF92F8638C3
+:1040E00029AE239F976AD3D38A79F9854B7F0AEF4C
+:1040F000671457AD8B73E31C48BD15FCF281A9EF23
+:1041000073C1774B3EA91AEEFD09BE53716C15477A
+:10411000EEC94F0989739B42F262E82F24BF45C55F
+:104120009B553ECD7576919FA7E2C92A6F46F557FC
+:104130007E8991BCBB76A385F493180B0BA27F9567
+:104140001F73ADBDAD08F902D7D63A280F6D107FA9
+:104150006E2BA6765E332FB7FF99B72FEC8D5F0FCE
+:1041600092F0F3F7047FF9259DFCAED7CAF83DBE67
+:10417000B78BF77E7C8FDC29E819BC24BFDAE3C853
+:10418000732AEE8DA7A37DB4681F447F59FFC5C76E
+:104190008BED5D3F69096D45C8A74A5BE6A07CAA27
+:1041A0006D1382747E4B77EBEF019FBE08E7EFA3A0
+:1041B00069FD64A6C14F304DEABD5F4387E358AF48
+:1041C0000A3F0ACF8A2E0ABF21794784D7FEE81416
+:1041D0004E9F70BA287A945FEAC533F074391D7A1D
+:1041E000E9047FECFF2B74186D69A3F37F11B5769A
+:1041F0000FE0FA26BADCD9C526E13C7172867E371B
+:10420000E85379C9F53AEA556CC2246C4DEABDFB16
+:104210001BDE4FFE86F70BFB79FF56A4CA47F03A28
+:104220008A385D264AF9B1AA5CE077B2DB4CF89D8A
+:1042300098BF88F451E6107A9D8BFF0FF264D25735
+:10424000BEB5E86FD200A37EA8E2C137C9FE2687BB
+:10425000C5816F927AE34D617AE1B0E1323EEC665E
+:104260006E61F78973EE65729F4E9574CEE4C6FC5D
+:1042700078D091E91608ADA338E75E8873E07EAA8E
+:10428000DFC802547E8B0569DFBA990B38D46F61A1
+:104290008CF2198F444FAD58CEFB9B386A62169E44
+:1042A000879CEB2B193E86CEF5FDC11972AEEF70DF
+:1042B000998BF486C3F64CD263B00EAC217EB43732
+:1042C000B9DC472AC311BE2FA07C8DEF0B599CC9C6
+:1042D000DFE0FB02EA37E5AE61F86E92CB986FA2A1
+:1042E000BEFF96B3945946F52F77BF55F8F210F8F4
+:1042F00057DE8A1F5606BFF35BF1579561BE6FC547
+:104300000F328932C24665C14B597DE9598A0F7B0C
+:10431000C79BC42C8997E357E1331C8F0ABFFF0268
+:104320003EE7F785CFBBA53EDA6D7F2F363903F127
+:104330002FB1FEEB5E2A1804F83F0768C84BB60B96
+:10434000BC84FB773E6B6443805FB63D8E9EDF2D61
+:1043500079E8DA8671D4FEBA86129ADF3551FAAA64
+:10436000E13877521CCCE19A03FB6C5B139DBF3D97
+:10437000F7BCD903FDBBD6ECDAE4C15A7F4B9C975E
+:10438000635F1D4947BC8D6DEF3B6FB7D6AEF0E65E
+:1043900027F88B32BC778BFD4F9C2356FBEF9008A0
+:1043A00091EFAACEB3F6B71F8F8D12726548849035
+:1043B000838A4EFC3BAAA7F27EC672B991FA5014CA
+:1043C000E9DF2509DE07804F56C60CFAABB2ABBB5E
+:1043D0000798296EBD12F1CB01B06BECE4CFB98E1A
+:1043E000E5DC023DB80CF626C743F99B55744F81B6
+:1043F0003A9711916C32DE6FE38A32DCD7129D9BC3
+:1044000060A8C778061BDAC7956418DEC77B471813
+:10441000DE274E2E36D407FAC619DA0F9A5D6AA83F
+:10442000A7E83719DAA7D6DC6AA82BF9922A1EB1B9
+:10443000B4FAB986EF8736CC37B477FB9718EF9F7D
+:10444000F17BDB73932097C45FE6C69586F73F8ABE
+:1044500015E70E263B16D27D12D9CDDF318E6FFEC9
+:10446000CA0CFCA6C669E2BE0097907F7EFE3FD0D4
+:10447000B53CD9280F273A8DF630D7D734ECBFA9F1
+:10448000F516C3F337864BBBB7901592FCFB27E9B3
+:104490001C8E97EE32E609A23DF4155EBF4E1FF169
+:1044A00010FC0E6503AC9E0013FEEED079C1DF1D3B
+:1044B0008A07F8BB43EBF0771BEF6D32D21DFEEE9F
+:1044C000D0F7A38E19E93EA6DD48F7AB8E1BE9AE07
+:1044D000F8319C3E577718F9219C3ED79C0EE30F8C
+:1044E000498FD9FC7FFF10E798895E931C1A7BCC1B
+:1044F000FDAFD3E76F61F4E9A187C34EFAE275C15E
+:10450000BC38D4CBB1CEA037C8F9DC9057EFC88007
+:104510009CB4E9D611037BF9A72945F04FF7B117F1
+:104520002321F7224618FB3F9FAA47A1FDECC48B2D
+:10453000E936F04397B8AF6FBE949F2A9F90DBBBDC
+:10454000E23CDD77CC14DF3F616AA6FB920E3BF5BF
+:10455000047C7F677EBD86F84132F3ED59C8C79B66
+:10456000F78B088A27CC1B2ACE75B2FC0ECAB3572C
+:10457000726E5EAAC863193C42C6273D229F256D14
+:1045800084D00B633C4ECA7BADCC17E708B859907A
+:104590003EAF00F8783B12F71676B708FF7D8755D7
+:1045A0009C2FF5733E455C0C7A22F4B834A947354C
+:1045B000FDCE6E07FCC3B632C3BE383C6037E45D47
+:1045C000E6ED721AEA056DC986F6230FB80CEF8B7B
+:1045D00082B986F7A38E790CF531ED2586F6571D45
+:1045E000F71AEA57774C36B4BFE6B4CF504F655D43
+:1045F0008F02BF4335618FCE1821F278F81AA57863
+:10460000D2BC0DF1E2FCA0B453951EACF27175C999
+:10461000D7E1FAF4509B4EF9BD4D29CC43E700ECAD
+:10462000D23E61463D5B97F9B44A1F657E633EAD5D
+:10463000CAA3EDD1C7A5FEADF4E1903C5A6F681E48
+:10464000ED3C79CE377CDFAB1C21CFF385C13FD465
+:1046500026E6DB748F8DCE2D28B8C2E1392BF33BD3
+:1046600077D8FB3E3FB27C84B0637F96E95B3482AF
+:10467000974F403C65F6359EA7C3CFF9ABE97B3633
+:10468000CF7DAE6F1E6FDE48319F0A93E9CE69F988
+:1046900094B734FB8590F11B257F57E76B7DCE6F78
+:1046A0005E9CC82B62713617F8B7FFF1043E936D1C
+:1046B0006C2D9D739179E7776C6A7B102EF20A5B03
+:1046C000B355DC5F16B0821FA69472FDA988DBC9C2
+:1046D000DBFFEB870EAEE73CD160213FC4FA67CA2F
+:1046E0006770CDABE71CC1506E5F803FA0ABC02EA2
+:1046F000F94B9EC89BFDC9084665B9F9AB9EFC6F96
+:10470000F2A73326F70761B7F4C16FC4876A1EFFAB
+:10471000EE3CF0703C29BB90C9BCBB2C0997C25F32
+:104720008F1D2FF1A7F2F15D2BACBEA71C94D73FD4
+:1047300019F94C8A7E31F9822F7F27F181769047D3
+:10474000FDB52B37E7C7C15FDBCD5C71CEAFF1475D
+:10475000FEBBF0A2F0DFDFF99EFEE4C36572A19F0D
+:10476000F33EFDF127FDFD13E77E42E483C82F9160
+:10477000F4086499289EBB21C6B88EED79625F78F3
+:104780004EED177E6E4F1AE504837FB9699D59CAB5
+:1047900009B16F63FFC4F305EBACA4CFB006918FF2
+:1047A0005C23653163BEA471A3118FB5D27D56D74A
+:1047B0007919E93BF31DB6402B6F5FE90FDFB7BDF9
+:1047C000F43DC56B5CB8B7C4B31EFEF7AA8DC676C0
+:1047D0008B1CE25EAF056176E92269972E0AB34B26
+:1047E000FF3A42DAA51EE621BD4CC69F159C3D7CD2
+:1047F00015C8A4BC60D8A966E12FA17C2585271720
+:10480000E20B21F768727C46E562DF5E6BE9338F6D
+:10481000AC079FFDC4C9CF224EEEC2FAEFA6F33F0C
+:10482000DD7B23451C4DC52F64FBB3FE8BF41EEDD1
+:10483000D1DBB9A2F642C4917AE21D6171936E8711
+:1048400029B604FDED16F72FA83C80257F0D143AFC
+:1048500043E29C7A87C99077115EEA6BF6515E401D
+:10486000AB45CFCC433EB2C563C77D91F73B0E2726
+:10487000E1BCF614E9AF0987B747AF1AAF8938A191
+:104880005FE8B9DD9335D273B95C6458472A9E3D21
+:104890008D0507A054F1037D6309E159C50F2A83F3
+:1048A0002504E78CA645565CD9D7F1E8EAF22857EB
+:1048B0006F5CA1234DE4A3F4175F987EC943FDDD2F
+:1048C00076691CF5539AE716E7F5D73EB8027C34B3
+:1048D0006217B3629E1D61F9D8AA7C214FC89F77E9
+:1048E000F394DC96792E6B34A1C76B4CE5BD90DC5C
+:1048F00056F58BCDB25E2EEAABD6897A87BCC768F7
+:10490000A7F437609E28311FD8C5BBA53F02F340EE
+:104910008979E039E414EA9053A8434EA10E398511
+:1049200012720ACFE7335F7A9159C441CA42D60D59
+:10493000E22065217A10E220A175C44142DB230EFA
+:1049400012FA1E7190D0F7888384D61107096D8FF3
+:104950003848689D95DCD85B875CF34E33D4A773E9
+:104960007DBF2C64DD220E12DA3FE22086FEF415B4
+:1049700086EF6F670D86EF1107096D7F6783668885
+:1049800093DC29CFA5576D4D20FEB8C9ED6BCCE364
+:10499000F4FD43F4DFEFB6C20E341F5C4CF6595DF4
+:1049A0009447D0B979B2A0BB89093A77CD213AAF03
+:1049B000B6897AB9C88BED2BDE509625E20D281109
+:1049C0006F408978034AC41B701F36E20D28116FAF
+:1049D000C073C41B5022DE8012F106948837A044B5
+:1049E000BC0125E20DF80EF106948837E039E20D9E
+:1049F00028116FC0F313887B64F5C205BD3DCB6001
+:104A00003F723E34D88F4E431D7A7B687BE8EDA120
+:104A1000EFA1B787BE87DE1E5A87DE1EDA1E7A7BBD
+:104A200068FDD00817AD33E8EFA1DF417F0FAD1768
+:104A300034FB5F838FE9E66DE78FA2EC88D19ED0CF
+:104A4000B82808E67D3C0371A48E482D3D9E2F7941
+:104A5000EB9ACE1965BCAECBFCB242D645F73BEB28
+:104A6000F2DE1A3DC8281FB6E02FC9422EC83824EE
+:104A7000FD71BA17ED65640794CAF383EA7B0F737F
+:104A80009A51AAF6BDF5BEDB858FAFDA91BC0C81D9
+:104A9000831B8845C883285AED28461EF74E932667
+:104AA000F220EF1379A8E17CF527B96FEF34ED39E7
+:104AB0001C85BC964A8DEE8BCFB1B063B8C7BBA046
+:104AC000B9BE18FAC2C7793DF7CB8F435E8C825BC3
+:104AD000F901B99CA07355E3BB98AD3A1FF7893132
+:104AE000DB02C8779BD013F01DECC73CBFE67D2AE4
+:104AF00084BF3FCD137ABFEE5F31AE9A3FCFDB5D0F
+:104B00003F0EE7B5A64489EF7EF2642CE171EA5AC4
+:104B1000ED299C8B1BBF9B7971FEF282843B6FB7A2
+:104B2000D3564DE33AE99C578FBDB22D9DCEA55586
+:104B3000B28EB264F2E56B748FB9C21B9FDF51CCA9
+:104B40008F8BF86356D247C5799128795E449D13BF
+:104B5000715B7C7B608FA8F322D78E8E2F47BE16A9
+:104B60003B28EEDDBB7974E5BA81BC7F3D20EEDDEC
+:104B7000BBF64FF5AF517DBBB8778FD8602C8D4316
+:104B8000FBDA30BF46F73D4CF5B79A06B8707E7435
+:104B90008D3509ED77330FD49F614C9C8354F0E53C
+:104BA000B37613EE1DE75BCC91C4103EE29C7A1BFA
+:104BB000E85EE4B1D27D10D32C4E2BE446F83E7E65
+:104BC000793E5D989E10960FD1B4FA78BA3903FEFB
+:104BD00024932708B9B52F9AF405A5EF54CA3CA829
+:104BE0008B6B5FA3FBAC2BF708FD40E77200F24F25
+:104BF000E547D46506D24DD01706B7162698C5FEF0
+:104C00009FCFF178C6FFE2CC1217CE31BE46F9FA3B
+:104C100095EBC6C489F33A22FE502DF1542DF35F73
+:104C200058BE33097AA7BAC7B4DC3C3E8ECEBB353A
+:104C30000B7D4EF9772A7F35EA75D0B9F271791F6D
+:104C4000C8C64A3A07149E87A2F44375DFC9E2B585
+:104C500056CA6F591CA6072E957AE0D2303DF09ABD
+:104C60007CE99F517AA0BA9F4EB6A9FCD59119A4B0
+:104C7000A7D48BFBF82AD608BD85ED11F7D857AC21
+:104C80009968C2BD1515FBBC1EAD0FFE7857EA2F03
+:104C900053306822F27C065339F3523295B32EE535
+:104CA000921CC0590CD0BFE36546FAF47B525F9961
+:104CB000813C3F9C8FF347C87C3E46FA5211739665
+:104CC000436E8CF06A47E0BE9E62D5D7218F704A52
+:104CD0002BA3F3303743AFE12F6643CF19053E775F
+:104CE00097D3B980C91A9DAFB879F40AC9D79CCFB8
+:104CF00019F8DC2FF9D647F59EFD40F2B7EEEFB478
+:104D0000D0BDAC7ECD867BD97469CF2AFE0DE7F38A
+:104D100079F2F7269843F8997AFC50001697ABF889
+:104D2000C7CE84BE380FBEC1C1929076D875E2FD61
+:104D3000DDBBC7CE5C8B1CEBFF4BFF4485FA1D0629
+:104D4000AE67419EDE7157916D7E885C292D2C6D7A
+:104D50002918D84BF7F93DE7C6F20741FF5F797F85
+:104D6000F6A0AF3BBF58C5F18CF5312FAEE36EDC3A
+:104D70008CFB703EF39625E33E66A62E9109225FDA
+:104D80006DAEAC1FDE7DE77F6E74107EA8BE39BFAE
+:104D90007CA69FD68B9057B7435E9921A7F487F2E4
+:104DA000911F64EF98047A44E777C9F3F0F21C6B23
+:104DB000983FE270BEA043B85FA22A5FC8716671D7
+:104DC000A5DF4EE7545DE4D753F07F62359E1B5458
+:104DD000E5CFA47DFDEFCAB7FF7392FE2CE6F788FE
+:104DE000499CDF1E6C6E66D23F247E2743AE1F2691
+:104DF000EF33E8A53F971AA0FFFD9A3394FEFA46D9
+:104E00004D9C9BEEC78FC372BB1EDD013F5EA3F8B6
+:104E10007D8E2773041F3DF91D1BE9DF15B6F6D7FC
+:104E2000704F93C2E3470DFF61A5FBFE58301BF79F
+:104E30004FCDAD8FA4FB5E4B0B7D8720F7A2F33DDA
+:104E4000448F9602C1671D4EDF513CAFDB74E80909
+:104E50009C1F5F7ED04DE71A2B0F14ADC7BD16A562
+:104E600085FA9B986FA5C369C3FEBD6C6D3CED6769
+:104E7000F306C9F385AC8BE2540AFF9DF9621FDD8E
+:104E800052C8E43DA732BF9E0BCA69867632AF385E
+:104E90006C9D28FF60B89F21FC3E81FED68FF227D3
+:104EA000C07F600BF12F2AFF8435F79339D83F2B51
+:104EB0006CC6F370AA4C289076AEB40317F4EC5F7E
+:104EC000F99306415FDEACD1EFD6543B5CB3AEE65E
+:104ED000F5EA6356640AB229092E718FC4FDE21EF9
+:104EE00089F97CBD42DE54C8BCA1EAAD25B4DEAA76
+:104EF00003BC4CEC7F5DDEBEF948DACBE09FA097A7
+:104F0000CE89573BBDB68490755FD5AC19CE99ABB1
+:104F1000BAA9C02CD611AE302F86BC70DB70974B6F
+:104F200005572B9087965020F8437DC7DB511EC351
+:104F3000940CF6BAB8C787C3ED16E31587F43FBFE4
+:104F4000D9785E9EB7277DC8511023CEA73BF9BC08
+:104F5000E1FF703A094E8E07C253D783BC3F178DCD
+:104F600043F4A80A06ACB0B72B903FC1EB739D0188
+:104F70002BC699BF56DC5BA16F12E3E81BE36D05FE
+:104F8000D0972C4E5B1AF027EFB5E7F0911CACE6FA
+:104F900078C1F91F750E301C3F9512DEEAE678A342
+:104FA0001ED6BCD90A7ACCE9E7FCFC7505826FE70E
+:104FB000AF9D40E79FAB2D5ECAAFD7257EFFB822DD
+:104FC000F201C407E6B46CB1BA79BDB040C899EB40
+:104FD0000A047F4DC90866D3FD342B223D80738EB1
+:104FE000B399E6D783DF87393E34DC83E223FC7252
+:104FF000BEF0238FACBAC548CF5E7862C43D462D63
+:1050000095B4DE165A749B33148EAD87B271AE67B9
+:105010000E5FDFB8778739753A6FF3E9C3B3D269AA
+:105020009E1C4EE035C6E39A84FB66389F101F2B0A
+:105030007E51E783D578330BC479C799057DFBD7BB
+:105040007BD7A597F49B264E5FF8BDFB5B97361C7C
+:1050500034E2E3DAAAC53D60E1EB54AD4FB52ED59D
+:105060003A55EBF709AB2F98ACF5CA19BEDFD6BF9E
+:10507000D0079E5A0A841C992BE9CAF17A34F45C51
+:10508000D1F7E47AAEC830AE77F447F7064ABA579C
+:105090009406B3710E50B557E3562488EFC0F7E07D
+:1050A000B7A5723CB45F49ED4D067951D5232F76F3
+:1050B000AF4B82BCD8A391BEBBF2C12369DF861E71
+:1050C000FB9CD063CFD4EE589602BF8125901E7A08
+:1050D0003F537550C887055CFF81BC5828F7E9929B
+:1050E0006CFD3B0521EBB7FA87CFE5E842BE042112
+:1050F0005F3E7EEE950FC6B97AF74F05FFFC8DBF78
+:10510000B6563A42F1A5C9FB28BAE9DC5795C3E681
+:10511000429E6DD5DA4A92B72C99DB135A489E54B9
+:10512000181F54AED5E8DEACAA86B101F3FFA05C2F
+:10513000AEDA348DEEE6517452F76FA8FD54C1FF1C
+:10514000B8847FAEE4E380946B736BDCB685B4EE19
+:10515000DDB62AF0BF7C3FA7DAF8BC874E3D71EC84
+:10516000FCF5C9F21C0BD9259BACC2BFB73B86F43A
+:10517000D5332B5F7A67266FF7C523ADE9D04F147F
+:105180001C8BA41F6F81F4C72D947A2BA7D34F0BD0
+:1051900042F25B163D29E854F5FCAF7E8FFBA12A55
+:1051A00032A43C7B509C2F9FDFB687E83667E366CE
+:1051B000AB9BB7FB4581DB20A7ABEA8B9CF04FCFC5
+:1051C000DDD86A851CF8859437E1FC5E21F3521521
+:1051D0005EB1EF6821F10BD51EF26F0F1FE7AE1520
+:1051E00091B1C87351E39C967C5C551F9F80F1AAD6
+:1051F000EA2B7F00BB47C9FBF075773252AC87F9C9
+:10520000BC3FACCB93133C74CEB642FEBE5478FB8D
+:105210003F48BAFDC82AEE114C8D6E7B9AF2169665
+:105220004779201FB2B23A021817FC0CB86D2671EC
+:10523000EF60566DC7978083ABC5949F8212F71DB0
+:10524000414D4EE2F5A74CE23C50865994D642C1FE
+:105250000F704DE13D1BD041F79F85E4671AF8D5EB
+:10526000C6B66FC4FD2BB6018C7EEF45F1A7EA47A9
+:10527000F1A7E2DFFEE6F7DF5738BF936EE987C894
+:10528000F5A4E31CC5BC8786D1FDFCDF344F9BBC75
+:1052900007AF67BE11E2770B2E9B6F968C8FF73BA3
+:1052A000DF96F2A43EE61B3E4FB54E54EE754F5CC2
+:1052B000A159C4154E6A7CFFE2DF9D5C1149795FFC
+:1052C0006A5ECAEF7DA5F9F2EEC2049937DC1103DC
+:1052D0003DB242FE1E040B8A3A9E4F0B79AEF67D1C
+:1052E000756F9892CFA7EAE5BEC83A1EC47A660DDC
+:1052F00099744FC689E69331B8BFE3E404019FFA7D
+:10530000EE2EAB38F7CA626C2EDC9FC8ED2BFADDAF
+:1053100087056B07911D79474326C9853BFCF1C280
+:10532000EF20F5FB85520E46DF55B9FE2AB4DFEAC1
+:10533000766A7C9C050ECFA75BE9FB3C0FF4C1E8C5
+:105340009669B60CD27B851DA0E2407769CC47E711
+:10535000992027B1BE4C87B2B0EF2CDA2AEC802915
+:1053600026B611F1C2A14DBE492990138F8A7B2325
+:10537000D936E3BD4A2F66FBC617026F61F791DD90
+:10538000656DF30E821CE7FA06FC4C0B1C3ED2DB6B
+:105390005F9172F2444B27DD4FAEF07AD939159BFD
+:1053A0003897DA156322FFDB959E57A996F124C53D
+:1053B000372A1EF518FE7335F064A27DADDC5C4122
+:1053C000F7FAAC6F994865F5E6F247FC05380FEB44
+:1053D0004B1A47705BC93F565D37519C1F7D2A228F
+:1053E0001EF64DBAD59F1EAA9756B76EA0732AA770
+:1053F0005B23E99C4A99735A59FC00BA6F97CE7D9A
+:10540000A976B585623F5F5237D170CE6401EF1344
+:1054100079B07F6E8BA6BC52757EE4DE287D51E1AB
+:1054200040718EE46A97383F9242ED5D7DFAC35534
+:10543000F969A3388F10722E66EA1CFE7D6DDD8B34
+:10544000B1E867E9C3EF8DE59881FF6915FAEF3997
+:1054500017B3559C8BB90BF612F4C804DFCC39C0D6
+:10546000FF9B66C27F7FE3D5E0474942EC883B0261
+:1054700071A4B7EA4166433C597732D28B4F9B59AE
+:1054800003F400A5BFA8E71B245E4EC735A7833FE2
+:1054900016EFDC928EFDE5F31851AFD839EB9790FB
+:1054A00057FAF608A19F5B18E9C3557EA15FB39A2E
+:1054B00004752F66E43CCE479B0BA3C53D3DF2FC33
+:1054C0008C824BDDB7FAB945DC17837331E0F78F77
+:1054D0002CC105A0EF475C7F851D5B2BE5D847CD30
+:1054E00066FADD113F5F28D0433E6A7E3106E773DE
+:1054F00095BE566EFED88BFB6856EE13E75471AF1F
+:1055000039DD5929FD20CBA41F64E5CBD649F8DD50
+:1055100011AE7FD1935A4BD0D617FD9648FDAAA75E
+:10552000BE770FD96DB5BB85FE50DBD649FA83D265
+:1055300047D4B9B8A5BB3B499F50DF2DDB2BF052B8
+:10554000B7573CAF44DEBAFCBD502D0BF6B446F560
+:105550007776CF9DB5C6509F43F577F2A5BFDED2D3
+:1055600045FAE003B9BF213BBC6EADEC97D7AD2146
+:10557000E3ED07138D11CF331DF8DE65D01BEAF67E
+:10558000C6D3F7C1BAA88DD8E7BDCB1C16944D750C
+:105590000EDAF7B7D59B722DA3015C94077ADC4134
+:1055A00099BF3570E97F46C27F90C2BA8EE0DED7E0
+:1055B000C34EFD4DC819F57B96EADCCB85573F1BE2
+:1055C00085FEAF1BDA7111773C58B585B3109FF893
+:1055D00075A19C477EC728F0F5C0C3423E3F6E656B
+:1055E0001BE9FE608B8FC16F1F947145FF5F4CE21A
+:1055F000F725B4E08F43F52BEB48B19FFA22447CAA
+:10560000B1C8AD7F08386ED1AC0545B0A95DE66C78
+:10561000F4AF7E4745E9A9A5523EA749FBCA3638F3
+:10562000D9013ED6BC5E3A87785FFEE12AECCBDF3B
+:10563000EFB2D3EFABAA3CBFD2AE28D25BD3064FBA
+:10564000A6FD4C7359584531FC2AA620F255BFCF10
+:10565000EC222FC01EA6D79A22291F593BF8C65FFD
+:1056600020CF53CD5F1EC1EF94A47E5BA3FB2FE739
+:10567000757FFA387E63A682058AE81EBC78FD2213
+:105680004877A27B72A7CE49F67D679BDD23F6099A
+:10569000160AFFC17BFE129B60EA85EB42D7A77416
+:1056A000AFE0852E3BF96B4B0FCAFBF6C2E0B99019
+:1056B000ECA2BC68DE8EF4CC0B0E13DD33567AF010
+:1056C00008DD9B57AAEED5B31BEFD563AEB478F8CF
+:1056D00093C987CA9582A42641B7EBE28C7662D241
+:1056E00048A127268DD4E43DA5027FDDF6F36FE9BE
+:1056F0005AEF3A5CAEE2F7EAF7A66A22E8F7A6BAF2
+:105700000F667EEDFD09EF417FE07AC1F732BCE91B
+:1057100023C7F4EE9F33245ED43E6C96FDCF90F801
+:1057200099E130097C84FDDE86E20F457F05AF3AC2
+:1057300077A4E8C6BED3FE1ACE05717A153CC4889C
+:105740004EB918FFC45FDE5E8763FE83CDDE4EDD9B
+:10575000FD6FA15310F7E05C319DDAC3E9148C1C96
+:10576000063DE161F1FB5BE1798D2C97D13A9F67B2
+:105770008E223FA02EEF05E7EBFB35AC6FB5AE8771
+:105780004EEE28C0FE78829BDE80ABC3D446CF1796
+:105790008DCCA0753884B5A7C8FC9B31D0CB9AE4DA
+:1057A000FDC73DBF63B8D841F78D5C08A8FB8F03E8
+:1057B0008F2EE4E3B6CCC827BFFE0526D77B4DCF9E
+:1057C0003DD9E2FEE39E7BB2CD7EF293CC89223FAF
+:1057D0004FCF3DD9D9E2BEEB573496837B68FDD3DA
+:1057E000EC941F1F7E4F36DF679E463CE3B19A283C
+:1057F0008A43A9FB914B9D7AE5C88197DF8FFC888E
+:10580000E69BB300FD1538A8BF8E3951CFEF146861
+:105810000EC28F73A22186EE85567CA9FCD743FD6C
+:105820009D8F024FEA5CE71F247F29BCAB736D0A92
+:10583000FF8ACFD47DECDA6AC16F3D79B2CB18F91B
+:1058400047867010A229EFD1E3029E1F8CD71B0060
+:1058500077D30A2E37C82F2EF2374F988CBFDBAB89
+:10586000CA26B92E99CCFF9F27F7A9792ADFBFC195
+:1058700098EF1F7E7F66629C6F1DC63BA7BD3716E3
+:105880000FDFFE6F739FF9233F90727974B4FE208F
+:10589000DAAB730F4A2F7CBBE8B334FA9D91AF8E1D
+:1058A000D0EF29CE75FA9AB18E22B3441CE00F29AD
+:1058B0001D744EE30F73FE9A467EE4D5E2DECF2BD5
+:1058C00085F3F273B4820F562D107986A9AC9EF839
+:1058D00036B9F77C6624E0F8FFED1C6DEF39D7C9C7
+:1058E000A34E51BE858F7EA7229C1EE3230EBFE8E8
+:1058F000E216CA1B233F9945E74EE30EAF72F3FA57
+:105900003B3FFD54D4530F5F74E35CEA4F3F9B452C
+:10591000E74CF30E5FC439D4DFFCF4B4787F0DA3F9
+:1059200038D6FB3FFD7C16CE9DDADDFA07A0EBCC26
+:105930004BF5AF615BFD60CDAD0BDC748E725A5AD6
+:10594000AE3847F916E8392369FEBA38ADF71C6559
+:10595000F748DF07787EE14BC1E76EC4C006FEEB77
+:10596000A53A47AAE46C7FF250ADB77FD73958B556
+:105970007ED94ECF462B98D0FF2F9F4FED12FB992B
+:10598000F17CEA6BAFFED685BCC3F1A3EDC4CFE3D7
+:105990001DED2EF80550875CDCFEA538CF87769686
+:1059A000D07603C439BEF1384F01FF41B73867F8EC
+:1059B000DAAB6FA440DE8FAFB7519ECF16F9BB00B4
+:1059C00031A643668CF37F00B1492F16008000009A
+:1059D000000000001F8B080000000000000BB53C19
+:1059E0000B5894D795F79F7F9E30C08008288A3F38
+:1059F000820413A433BC345BDB8E0A14A54D31DD65
+:105A0000A41A098E9120AF01D4B671B7C9C7188CFA
+:105A1000519B74756312638C1950D434B83B463073
+:105A2000A0D84C4CA4C63C96B05BE2B7DBF86162F0
+:105A30008CAF0C48926EFCD6D63DE7DCFB330F20D2
+:105A400026ED2E7EEDCDB9EF7BDEE7DCFB4FC430DB
+:105A5000634D1263530C8C19B3188BD733668A616C
+:105A6000EC591DC050EE1D665E4D246353631A56FB
+:105A7000B31C28CBCCD6A664067F6EC672194B9C8D
+:105A8000E09D6484FAC4B57AAA8FD0F4290D66C665
+:105A90007C8DDE45E75319CB0F8BCC64DF8152CF71
+:105AA000D2B5D08F69C2ACADB05E817CA32711E0C6
+:105AB000355D920D9666F986925D2C85B13A2D0082
+:105AC000B1F83F93BB15D7D1F656ED877E7D71892E
+:105AD000D62D004E4938C252B3617C7D51069BCE13
+:105AE000D8098B638A7522B4B3AD128E0FCFE0E371
+:105AF0007F5A14DE22C3F8C1E3B7E53AA0EE6E8305
+:105B0000D2C1AC8CA578A29768EF04384AC9952C0D
+:105B1000005B63976827011CAF7448D06E74452FF3
+:105B2000C99F84E7335ACEA733F63326B12899B1FB
+:105B300064AD231DD771167DA6671A6C1FD297CC52
+:105B4000622CC36A213C4C3C0178827D0E2D8C7006
+:105B5000B7C0F95886928BED49BAA1480BE063F0C3
+:105B600086B6C86DA671917F0FF537F1EF078CED02
+:105B7000EE96A95E85D5D267854960BDFA54F313C8
+:105B800088BFBA04A391CAEE6B850CE7D196A4DE58
+:105B90000DF3D8F56C7949C6E8F103560DED2B7974
+:105BA00023107432AECBEC4C81FF0B632AEC627392
+:105BB000186BFE2554FC1D6F879330FD0C8D806D96
+:105BC0003BF25383FADBB1BFBF9DD98DCC3FFE7E44
+:105BD000EB8C1D1BB4623DA4730573CF802324B2EC
+:105BE000068901FE129897E8B3DB1643FBA23FA09B
+:105BF000D30BB1A6E62DD02F55662E531695CC02A9
+:105C0000656238AC07ED89AF99DCC8577B4DD00E83
+:105C1000435335BCDCABE1FDF561CC857C3A1560C6
+:105C200006E5319BA3CE3691E6F1D23CF2211BF280
+:105C3000E324E6A1F5E3998BF6A3F69BC27A4D081F
+:105C400033ED501AD26BAEAC19139F3ADBBCF5485A
+:105C50007F5FA39D7DA20DA05378E4BA40FAD5E101
+:105C60007873E0B8F9344E1DEF5CA7619F4CC0C358
+:105C70007B897F9CA91ABB3B03C7B137A52CACEF2E
+:105C8000D59744F8C7F5371AD9274087FF68645479
+:105C90009E69B4D0FAFFD99840E51F1B15AA3FDBD7
+:105CA000984EE540A395EA3F6A9C43E5BDCB22723E
+:105CB00090FFEB3BE7B14F8C1CED37E17F4E8FCE71
+:105CC000311000F7CF1B9B8FF60B3EEA4F1EBBDD5A
+:105CD0008BEDB8CFEF737A0E3EC8DC2DC9C4971B8D
+:105CE0002C31A3E90FE733E1F90623D8120FE0E9DD
+:105CF000588E44F30F4EE270B35547F3D9356C0715
+:105D00008E3F96A3E7F34FD75462BB3D86CFDB9F10
+:105D10000630ECA768CEBC17114FF638A8CFF2C3F7
+:105D2000FDB7F376FB645EAFEE576DAFB359685EB7
+:105D300095EE833A583F83F89DE657FB7F96C7E57B
+:105D400030B4BF3B5553E41E031F1A1BEF4F7201C3
+:105D5000F870A11C2407C8459D4272A1F2A1CA7F18
+:105D6000BB6D1C8FA906C1E7E12007312407342E43
+:105D7000311EE44022BCD8199C67AF24E425541E90
+:105D8000A0443DAECA832A072ABF27829C4931FE20
+:105D9000737C2F845FD5F29495D3A5372EE21744F8
+:105DA000D76E9D055421F40742C6207C4F8E1DC638
+:105DB000153C6E6E184B7FDDB4FE8D7850F5C13802
+:105DC0007818757E3D2FBFEDF949BFA1DE46BE1D97
+:105DD000435F7D6655F515E75B9DCDFEA915F95529
+:105DE0003269A528284D9C6F42CF7F2C87CB8DCA66
+:105DF0003FBB6D8CDB4B3C67CA687DA79E67E49C0C
+:105E0000AB18E9BDD4305E1F4A5FF55C017AEFCF75
+:105E1000B82F159F8C796C1698674AADD9BA25D9D9
+:105E2000CFBFBE89D72BD07E6DB62AB49FE735325F
+:105E3000D15FB52723F592BC7C7146909D6116A079
+:105E4000E3D07103C9B757C32A5F8171ADB8D49D40
+:105E5000FE73CF16F41B5E3243B30EF6E5FB93D907
+:105E60008576CB3779E8AC04E37D3B74CC45FE8383
+:105E7000FD47521C630F824D41BB7415F41C4B63EC
+:105E80004C7EEECBB312ECBBE239991900753E5053
+:105E9000DB328CAB7F3AC26DE4E3188371B5625C90
+:105EA000D38ECFEF45FEBA00FC6980F64F4C75D318
+:105EB0005926630B9ED3111E2B22F46EAC7F63C751
+:105EC00053A796017CA15D52D0DF2894CDD45EFD0E
+:105ED00092ECC6756ACD859724F0737CEDCDCF84A6
+:105EE00041BDF3808E99605C61BB64F5C2FCAB3C44
+:105EF00011881956B15DF7D140BA5F6FFE50D8B125
+:105F0000CABD921B388655EE0A6EAFDE1B0CD73227
+:105F1000AD1F86F9B36C11B117EE006026B3DD44F6
+:105F2000BA6D8F416335A2B743F90ACD36E9C7355B
+:105F30005C1F33F645DCDDC097F2F12F933E3273E0
+:105F400078B180CF01FCD9971CFF2ADEEA84CEFF0E
+:105F50006C12CBF1C039EB8E9B2C2E38585D974CD0
+:105F6000E7F079A208CFF5610377919C1E952DE8A3
+:105F7000876DEE945DD8EEEC36EDD1C039EB3A2466
+:105F8000A645B8D3E0E678BA5681EDAB3A4D160592
+:105F9000DB8F1A980CE37D403713D271EA00D11FD2
+:105FA000E9EA92680B3F92F2FCF497915EB17E7A37
+:105FB00035EDE0FBB97080D3A7507E584BF46A965C
+:105FC000587C009D7FAF7979845ED86FC1737FE87C
+:105FD000413A57C0FE0C0AD25D263A5F00FAE0BC97
+:105FE000FAE39F240D98FDF49681DEBF52C743FF6C
+:105FF00055B7A07725736D447FEEDBD2395CC83F7F
+:10600000F8BD179E47BF37426F453E8C15FEF1C461
+:106010009AFE93B1B06059CC15E76AA89F91F00A37
+:106020004B053F418A763C6483716717BEFB18922B
+:10603000A36FD1CB36E48B26DD40EBB350E18A0E63
+:10604000B7A20C0E262FDEF52AAC931F733DE91084
+:10605000CACBEF0C1664A726218FF86704FA3B1908
+:10606000C737D0F11C9EDFD96DF01A008FACBDC0D0
+:106070003EE20F4C477BECD1A39E2AD00F95AD4654
+:106080007F1CE6C37524602394EB9AEEDF9F91603A
+:106090009CA4C4B252848D66AF8CF3B4E9AE8E9CDE
+:1060A0001BE6912CEF52BF5DB6E9B48F94F8EF294F
+:1060B000A87F9A96324758CAD7E979467AFE059D55
+:1060C000D0EFE3F97FE3E87BD5EF63AE29D117602A
+:1060D0004EC405971FAE7756CD61E24FC885802B21
+:1060E000D7BB228DD079D51DD6043CFFA7C86791B8
+:1060F000C87FEF6827C0BE6A5B25A25B1DF20F9CBC
+:10610000EB24DA37A81FF4083DF2526FFE84582CB6
+:10611000252B482AABEA96AD5E68AFEAE4FC348AE8
+:106120006F84FEA86EE3FA63141FB5011CE0A7D5C7
+:10613000215FA930D0FBA85F7FCCBA09FB7D713607
+:1061400013F4E67AA240CE881A007E19664A942596
+:1061500023C06E49DCDF52F5CA6D3B40D507AC3B2E
+:10616000D36D64DA8075EF3860098267791282FA3C
+:106170007FA753096AB779D383DAB34F5983E0DC39
+:10618000DE3941FD679FB107C1770E1405F5FFEEBB
+:10619000C59220783803CE3396DF21CA1F264841A6
+:1061A000FD172AA6A0F98BD3A383E061B3C08FF0BB
+:1061B0000355FFF4A28DFB41A1A58ADF1F5B83D7A6
+:1061C00051E3E29FCC095E6FB13D78BD6F4A977D88
+:1061D000E0F76BC1AF3F00F611CBDF82FFAF05BF29
+:1061E000BE0DFC7F84FF05FC7F2C3DE0FF63FD2B93
+:1061F000E0FF23DC0EFE3FC247205E41B8B3B1880A
+:10620000CAA38D25547F2BFCF588754F89754F8B5C
+:1062100075FF5A3CA9A5B36886E62B90D3793197D0
+:10622000F4A887ED6B060A310F30F496CC5A504033
+:106230001CEE538DB1688F2630F45B58C9D0DB1A41
+:10624000843B522C5B14B443FFFE1EB6FBDA65059B
+:10625000F5F989CE8F23719EAB5F811C66E3B88F01
+:1062600023313EAEBDCE08DE02ED0AC00B0F8162C7
+:10627000207F06F41AF64F5561B79E4159D27648F1
+:106280008FF4A8397088DADFF2E882DB0F3407B5C3
+:106290005BB03F94355A37C5F7973BD5F9BCD4BFAF
+:1062A0003655B2A35F7CF9C0BFC75560BFB6F7E3F0
+:1062B000567E0DBE3F3BF27206EA7527D861AFD914
+:1062C0003F8FB34B2760BEEFDAD44385316808DADD
+:1062D0002436038AAB6C2B5B07FAAEA6B3B516F572
+:1062E000504DFA321D4B267D24F20DA06DD15FC2B8
+:1062F000E01EF077D5F379E44A98F735CFC9BBECC7
+:1063000048BFEE372271DDC17639289E5994C5FD0C
+:10631000D645597AA2E3D5F637221568DFEC7983A2
+:10632000E35BEBA5739F10F0209484E74E99CE5D5C
+:10633000F59586F0AFCE774F964CF32DEC9C1181FE
+:10634000E7EAF3F0F596672934FFC2D415E5B8FF04
+:10635000D3094B7365F2F34031A35EBDBDB815F3AD
+:1063600003351ED93E56BCB55ACCDBA3E37CF856A8
+:10637000EAE19EC9C01FA78B26D848E78B7E5559F6
+:10638000DC1F2FD43B52D12EF4999508E4E3478BC0
+:10639000522290AE27B0C4FAA23D7A0794D5ED7C84
+:1063A000BD3E4B6F24F25B5F7BB68C7E8B3ADF4A3F
+:1063B000B1EE085F8FD0CD4574AA74379B711E3F34
+:1063C000FD78FDF22C9E2F3AED7EFF5EF453FAD25B
+:1063D000C3AD48971E3DA3F8B606E88AF6A0AF3BCA
+:1063E000B119F1A0AEB73C4BC4C9E91AA2ABAF5387
+:1063F00027FA2D6B6541FD78FC7C756FF07E2CEEE5
+:1064000073BF598676E905F0ABA1BA56D71087E776
+:10641000FF7457F0FE2A059E6B75DEB8B8007EAD9E
+:10642000ED1A911733F177972A1F0AD153A5635FAD
+:106430003AF7DBFA120C6E8C176B0FB5125F8FCE2A
+:10644000EFF426A39F9FF89091F286B78A67553F95
+:106450002020EE6118C7E98A527235D3FDF67ED04E
+:10646000667F3E6B22C6432514EFF5B1A10A34FEC8
+:106470004EF483A350EFFEF1195C77B81DFC3D5834
+:10648000D769EC5C741EFCAC612B080AEC7B789736
+:10649000CE2DE21333FAA715C23FFD5471E4C96053
+:1064A0005F9DEB3574BEDA8C30EED70A3DF9D9A189
+:1064B000E49F20BFD69E922D46F443216E21B88DD5
+:1064C000FB05759EE47F9A8BFE769B8EFC00D5EFD4
+:1064D000700ABFE382F0672FAC1FD293BF7A5C6271
+:1064E0004FC13E2A3BB7F52442BB336311F9AB4E93
+:1064F000B98DF28FAB7604FB0555EE60B8E64030FF
+:10650000EC0CF11BD4B8ED44D688FF3013E38F02B6
+:10651000796E3CCAC107829E6A3CB27696351EE50A
+:106520007DB35659A4E603104FF5C70F57E17EDD42
+:10653000B561568A0BD61D257C0E7EC1E38EC10443
+:10654000C6FD23C6F13AD8C9F9BB5E27F13803D896
+:1065500095E6334AEEF5D034E81A8E24BDC45811BE
+:10656000CAC39AA53C8EB463CE15CA17845E0AB519
+:1065700097DFD70EC8D101FAE17C16F737F3F5CCD7
+:1065800081766A6D8495ECD63423F7B70B1EF6D866
+:10659000900FA6417C6C08C8674F330F49D86FEF46
+:1065A0002310E266FAE3FBC55A8B2E3AC0EE31B6F1
+:1065B0009EFAABF38326E1E36F35BF05E637FBE7D1
+:1065C000077C4721BE3FCFB1923D4E5ACC582FC9D0
+:1065D0006303C9A37A9EABC067988FC59C09D2ADEF
+:1065E00076D7EB940776B25E8A470A23F93E0A71A2
+:1065F0003F0887F19265737CD9B3B9FE589B1D6C37
+:1066000097BBB2ED5236943BB21DBA6CD26716E21C
+:10661000CBB58257C04F891F1843EFAE7997C75546
+:106620009F831CA09CDFDF2029A9417E10E7EF7A21
+:106630005EC5AE304FFF5CC483CBDE9B1E877114FA
+:1066400097ABE5EB4C4A6A009FD6239F035E2A2D49
+:10665000553F42BFDBB12E4EC17C7F3DF2FD7444FD
+:1066600023E7EB58F887F1C5283EF704C3F0B70BD2
+:10667000F9AB8E19AC6847EA3B43DBAD5ACCEBA4CF
+:1066800064831C84FBE52049F065B34372A3DE6F8D
+:10669000BEA1E579AC5289F256F74025F225FD619D
+:1066A000BFCA796E9CFF1E00311E62DB63496EA873
+:1066B00011F4C8DF8BF3DEA3F5BE8E727C52E7497E
+:1066C000C67CCA49A7D18AF32F65E070807E296510
+:1066D000BD54F687D775786972D7548C9B3F701874
+:1066E000288FD3BCA12502F56926DB60B9908EC640
+:1066F0009D1DB8993DBE5F018CC42EA874A1BCD06D
+:1067000056118772BAEEC8B6CFCBCE1D7F7CCD1F97
+:106710003AEEC290A2E617ADFA78CE36BDE9797EA0
+:10672000FAD5334F3AEE57A5D708FD60CF53000F87
+:106730004BD8501EC6352ADD8CF06F2CBAA9F84C08
+:10674000D20DFD1451067689F44B283D55FCD6B187
+:10675000061DCF7335BCB714FADFB741A3A07F384D
+:106760008ABEB7A083D7C49BBC1112C59BE3D14599
+:10677000A5874A9F33D17CDC99FB65CAD3FD5FD3E3
+:10678000A52BDBF1D0D7C963A8FC8D276FCBD785AC
+:10679000C86588FCA9F472AC8B243953E958AB3036
+:1067A0008A5B6BBB23AC6EE6A79F19FE21FDF09EB2
+:1067B00082F231ED12DB297D13391CA07B8D50FA5A
+:1067C000006FD851AF3F951D6C8754BA8DA77F5489
+:1067D000FDF521F39EB448743FC0E5F3970637DE1C
+:1067E0002FAAF703EA3DC061A1F742CB0FC1EFC06A
+:1067F0007B972DE97D13D15FEBD7ABF3F0FBC70F90
+:10680000D7F74E5D0DE33F9CC7CB7EF4D302607B90
+:1068100018CFC37D38C9E042BC7D28CD9C8F76FC63
+:1068200043E9A1BB381CAF57105E1A3FDF0270BFAF
+:106830004ECDDB3D2AF4B09BEF63E9EC7CEA27B157
+:1068400037111F8AC44A681D498A2982FD7CF88B4A
+:1068500019594DCC7FFE966CEECFBA55FDAEE6B120
+:10686000FF41A23CF672300116CCB7CF7FB6683A32
+:10687000D49FFDC7141BDDFFAD095E1FED6832E537
+:1068800007B7D13CDFFF6A48B722C3BFAF11FB9700
+:106890007F8DD797CFA078A252D0D01E3393C7B1A7
+:1068A000EE9428B447AA7D1A3E75D81C98BFBC0444
+:1068B000F68BE903E0994F2605DAB7D7F7FD3A0DD5
+:1068C000E7A9D4BB32AD184F363F9F847E40E5BE6A
+:1068D000C7D3C82FDDB7390DE38BCA965FA7D90997
+:1068E0000E77507CA3E5E7BE72F0CE3D5B02FCE084
+:1068F000EA5C99F65F6A7CBD00FDD345777CF618AB
+:10690000E6C367FCA34479B1FB59EF636837CBD288
+:10691000B91CB1ED46D2EB301FDD3BB6CEFCF15ECB
+:10692000D4E7A7D33FD69543BFEBD95AC24F1973CB
+:106930003F118FF9B04D12E5C3FCFDA7D23DE68AA9
+:106940000D923E2116ED61B44D56705C34EDE3813D
+:106950004DB61EAC2F7B98D72F32B8DBFB709E67ED
+:10696000F5D65605272A995E12702F7C3D9BC75D90
+:10697000CB9F90C81F57D799F14C5C73E039AF0B90
+:10698000FAB31BFF46FAED27822E3F7AF8FD371344
+:1069900014BC4F72DC443DF2DED31752517FE5C781
+:1069A0005CCA403E9FA177ECACC273B718287F98B1
+:1069B000939928C743FFAC9FCF7B0ACBE50FAFD895
+:1069C000598579D01D468AA3D4FDAD91140DC69B7F
+:1069D0006F34FFEC01C4DBC5A78DE447AF69BE2D62
+:1069E0009E8D21A76AB91FE8AFA431F652A391CAC0
+:1069F000971B2D4C81231E6C4C20F85F1B152AD948
+:106A000012CE5F6B44BC3ADE7CD910EF2BA0AF7284
+:106A100036C17CE06FDA4CF6C93980AF19B73B5B01
+:106A2000368B73CD80F13657F202C443CEE6D53DA6
+:106A3000E88AEA73787CF476DFA624F2A31F3EB7D7
+:106A4000BB0ADA17E794A4E078E3AE6B14E7BFD192
+:106A5000F57819E5F55B0CFC7CE2DC179F4E8BDFCB
+:106A60008979D7B774147FD7EF3AB77B33942B9FCC
+:106A700058AD0FE4F76F7ADE64B19F5BC9D57878C3
+:106A8000F8F672F5EB24929F1690AB8CBF5EAEEADF
+:106A90001F5E4FF87B28A764510EECFFA2CE9584B1
+:106AA000F27471E6F788CF5DC725C2BFAAC7D5F1DA
+:106AB00045E2BC351ACF13E40F0A3DFE25447E881B
+:106AC000DFD7BB3E4D437FF8CBCEA55F7BEE238D5A
+:106AD00078838E792D2395A1ED797A478A15CE9703
+:106AE000A7E17EF028FF55DCCFA9F7EDF88779E123
+:106AF0005A613F9DB0B1A818B47F92372C13EF397B
+:106B00007E78498BF117C4751F05FB97ECA3003BFA
+:106B10003EDE7E6F55D6E13C5ABFDE9D7D46C3BC4E
+:106B20000176FBCE8130E60D587724EE30224F43BC
+:106B30001CDA3589F402D20DEF657C5D335B10BE43
+:106B4000A4E774F41D81F88AE755989CE73FE7A510
+:106B5000AE2B99A86743CF5B77F40AF1476DE7E363
+:106B6000D7243AFFC24BDACC5B9FFFF57D573291B9
+:106B70007E977403791847F9F403994887BA635CE0
+:106B80009F7F5B3CA8F5559BF43CBF2759281E2CE2
+:106B900090AF521CEF3BC5E3F8BAAE3DA44F87BBA4
+:106BA000793EA55ED35B188FF98786733DA8CF86A3
+:106BB00013787C05F3DB116F7353841DD40E252DE0
+:106BC00006BDF6CA083FF0B8EE22CAAF1EE7F1D400
+:106BD000D27BA4CC70867EC5659467A82F5B97BCDA
+:106BE00011F9FCA27B226682D8DB99FF5347F9B7E3
+:106BF000D7C22D32F9AD501B40BF9173B865FE70FE
+:106C000086A9717A38B307F4ABD72B3FA1F8F834D3
+:106C1000BF27ABBF9DCB133BCAE5C9B9E1757D4228
+:106C2000C07CBB519E68DFDC7F5CF4DAFF905C7651
+:106C3000DBECDD2897E1A80B71BE8428B724897EA0
+:106C400079FE7B4073B788C78B646AAFEF94D92411
+:106C50001C931041F7F5456CAB16FDDD45CC339721
+:106C6000BF9319F8CD77A1BDF835391BDF6381FFDC
+:106C70004CF7C785618ED435E81F692481574FCE04
+:106C8000E2407B26DE79CC9525B2634393C2C94F9F
+:106C900059B8C4598AFB1DD10F5ADE0FE6213F8B2C
+:106CA000B98732F13E93798732F19E53ED77EF6BDE
+:106CB000E10D64179927E7DE8075C272B9DDFC1C0F
+:106CC000EF9F419FD48BFBCF02F9C6331847AD39F4
+:106CD000CEEF09FB35C91FE07B2D17E019E97A05D6
+:106CE000E86A47FBE360763BCACFAC896E949FFAB3
+:106CF0008312C3776B755D8616CCEBD4E906E29000
+:106D00009F3777FE418FFC5CDFF1BE5E9985E379AA
+:106D10001E08FC750DE2B75ED82F67E76D1F60DEB9
+:106D2000CD798A5B51A7F67D8AEB6BDA0F51FC5E59
+:106D3000CBBC14BFD7B605F3CB7002CFB387CA471D
+:106D400058AE42FA528517EEE07271AFCC1A28DEC7
+:106D50001779D38509F1E48FF8C7093F51BEF218BE
+:106D6000FA2F83D325AB04530D86B936A05FE44ACE
+:106D7000E3FECCE0EF5ECEA920BDE2CEF929BE8BCA
+:106D800011FEEEC24DDBB472C07E1676F33CE160BC
+:106D900018AB3C42F4764C413A446695987373497B
+:106DA000AE32E99D8F86E73543CFF1A4C8679EC612
+:106DB0003C4F867FDFC589895C8F3137F14F8F86E5
+:106DC000AFAFBE7B51C7AFC89582E2A53512CF4F9A
+:106DD0008DA757F01EA55CDCA3948B7B9472718FFA
+:106DE000522EEE51CAC53D4AB9B8472917F728E5D2
+:106DF000E21EA55CDCA3948B7B14AC3F8D5BA5F7F6
+:106E000070CFEF44FBD9833236D90FF7C784C093D4
+:106E100083FBF7C748C1F06489FAE7E43EBFD39526
+:106E200081794C8B906F2502FDAF8B269E5FEA8A9D
+:106E300070FC1DE2B97C61D33EFE1ED14EEF59F2CB
+:106E4000639696A27C0DC71A18EAA1865CC7BC5C43
+:106E5000A0FBA9530B52B7917E3459F19EBBFFBEE4
+:106E60003BA2282FF796CC6458725E7AF6861C8077
+:106E7000E79925E25BD013DF2951E3499867413751
+:106E8000BFCF28906BCB71FE35934CD9A87787B2D2
+:106E90001CC5B901FC583879552AFA413D3AE50339
+:106EA000CCA7BADED5318CA3D4FC9BDAAF276BDE3E
+:106EB000521CB7303D654316EA1B102ED46F763D49
+:106EC0006BC37DD935E15213E92B458BF2BF54F0EA
+:106ED000EF7C85FBC35EBDA28DC1B83D6C5EAC4B43
+:106EE000E1F755E5E2BEAA5CDC57217DDEC1BC19A5
+:106EF00094EF413D96BD508F65E87BAE67724A5670
+:106F0000E652BC3D9414F81E6C11CA15D73349C81B
+:106F1000CF3B05DF26083DD3935D524DFCCE3C347C
+:106F20004F8DC8BF5DD105DFE3A9E3FCE319957779
+:106F30007F87EB6716A5E7EF5DA73017BEA7BDFB00
+:106F4000D549944FF2B9352E5D14C020E3A8BFD8BF
+:106F5000AB3CBE65095C5EEE3E1C4FFD9A441ED400
+:106F600019D39B16837657C8950A1FF90B7FE7E361
+:106F7000CC0218CA63123F9FF3EEDEB468807D92A4
+:106F80004983F971670B6FEF1372E79C2EE613E7E5
+:106F900061464F12D263F0F8AB490F00BCC5ECADAF
+:106FA000E0FADE9B467A9A79D3F0BDD015C9731604
+:106FB000DFDBAE3A92B50CDFD75ED17976235C7316
+:106FC0002487C3D2A1B396C0F6899E247C8FBBEAE6
+:106FD00048F6327C9F7B65E2A1DDD1D60058F7CA26
+:106FE000596CD73F9AB32C1FE06283FB5423F2CD38
+:106FF000BF72FE321DECB880F8A9E9E2FEFAFC830C
+:107000001D575F417BDC1141F7F507729389DE4D17
+:107010005DFB9F407EF31DD2911C6C69FBC3EE5F4C
+:10702000513F03A5518A0D9E1C4CB934E4FDC77D28
+:10703000B86E71B8E70B84D7E7FD80F6513C81CB81
+:10704000F3C6BCF9CB503E7D1D077F89F2571C0566
+:107050008E2CEEE76513D1A7FAF0CC7CCC03F82296
+:107060007ACB70FEBADF1AACC8A7D587E3E7635EB8
+:10707000A02397E7A7AB6EDF9A84F65573F4A57D3E
+:10708000BFC23CE56F4D743F531FC3FDBB6AB939A6
+:107090006F35D16FCF3E7C37E27BC944F7A45530C2
+:1070A00007AE57B56F06E5D58FFDF9E332A44381EE
+:1070B000BC6B1FD67FB1D7A4413CF4E9ED51DF434F
+:1070C00039ECD3519C5925E0AAFE097C3FE10385A8
+:1070D00044BFD8AD49685FAB27FCC35DB8EF6279A8
+:1070E000EB6E8C73D87E03DD155C7A09F006E32E17
+:1070F000B5EAE895AAEFA5082DF2CB15696BD94E34
+:107100009CBF95F7BB62DA4AF874B5DEC6703DE8FD
+:10711000C7505F5D91B605D55F6ADD9F8971E8E56F
+:10712000DF16533CAAF2F9489CB1D710640F4913FB
+:10713000C489F71264665DCC0C76B64A80978F3CA2
+:10714000E7DBC9FCE32FB7E9BC7AC05195816DC07C
+:10715000F7C1AA3C5427FEB008CF57AD694E437F14
+:10716000A52A7BA00CE5E292891913A0DFDBC25EA1
+:1071700055B7AF5F8C7EEF78FBF98BB03F5F0A3974
+:10718000FCB2D3E40EBC1F0C2DFFD8C8947702DEEE
+:107190000DDFDF6020DF5D9DEF6DBDA716E3B3BAA5
+:1071A00018AE3FCE42FF36D0633784DE5BBE2EB8CA
+:1071B000FFB5DC18FE2E553F9086764F9DDF97ABCE
+:1071C000EAB58134D457A1E38A65A16F5E9648DFA2
+:1071D00054B74BE764C053B5D1E5C6F73BD5184C5F
+:1071E000F2736A6F4A7C5C429EC03B8C7D3C2F9957
+:1071F000CE5DDD66B29B605C4DD84024FA43B5118C
+:107200000391E8E7F88ECAAC45902B364ED067BAAA
+:10721000205940DEB1CAA3B39B32C7A033FA4DF860
+:107220003E07FF1BD6DF95379DD6ABEC0CA7F59834
+:1072300065200FF9B47257F0383C972540FE7C9DCD
+:107240007BE202E3F164B1EF41E91CC9C9E09F3F71
+:107250004A42BA576BD806BC47BC2CF1EF1E00A6B9
+:10726000EF1E2E8BFBC8EA3F99C3905F2E7F594BD0
+:1072700072EB930648AFBD7BA484F4814F37407A0C
+:10728000ED44DEBDA4C77CD10365A8A7DE3D52C195
+:10729000DB270D9429D0DE8630B64F6564EFFF2BD7
+:1072A000CF49FAA358E6EF1BD81E9D85E78136F536
+:1072B00037525CA15302E3EE3FE6A9F7367AFFB9F5
+:1072C00065BFDCF89872B01DE5B0D24CF91CF09F98
+:1072D000DA5E413F6F699C15F3E295388EF3813E8B
+:1072E000F0FE2F36E67A05D2675994A3202F17EFC8
+:1072F0001907287E00AE263FBDEE77068A23077564
+:1073000043FB504F65463916E6017FD5EA7B37A22D
+:107310004B7F5537D083F77E8B64AE8FD87ECE57A8
+:10732000BE8C3DFC3B09717FB854E01FEC166B46E8
+:10733000BE90387DDFE83CFC0EEA155F6F0AE9E39A
+:1073400050B9B9D4F95424EA873360C75D0171FE9E
+:107350009915FBE99E7E09BECB80F2810DC1FC3000
+:107360007CE3A714EFB12702EA910FB707C3A17C12
+:1073700084FCE80DD23B2E92A76773B91F5633BF2A
+:10738000B70EF13002DF0DB01C009F088143FAB345
+:1073900012EE273C8BFF8D789CEAEDA7F8FC207F4E
+:1073A00017DB04F68BE08E70BA37D61C04FB14CBC7
+:1073B000ED13DA859AC85ECA4BF93A0C743FF2684D
+:1073C000D7A7F49E11F890F22F355DAFC661DC7E31
+:1073D00000E3845CB28371F44EA5A32B0EE30DB5DC
+:1073E000BE56E34913EFF1C94F57EB9DB2370DF786
+:1073F0005F23F56662FB01B1EF5A0DC032C262DF56
+:10740000129777D625933E0FA5DB0EC1AFA017329A
+:10741000E99DC5519E1750F54095D02727B03E8372
+:10742000CBBD45BD5792F0BD5CF898FA213E4FE8C0
+:1074300037D640799BED797CDFEA789A97E795A873
+:10744000BDEED895CCE919384E19790739A2875283
+:10745000FC7A05E53F81E4FF515D1C9CAB7AB76483
+:107460006D423D55BABE10BAB355DAD585942F1387
+:10747000EF3F43F715CA4756D80BE9494D74416CA5
+:10748000C07C97215C4FC8223D43EFE81F8C7DB242
+:1074900010F3133F2BDD46FC3C626F02E51CCFB3BB
+:1074A0008BEB71149B9B9AD17CBCAAA17963FC18CD
+:1074B000FB08DD6795A3B9304E195DAFEEF7B24911
+:1074C000DDDF7CDDC4403C2C595F3811CA55C6BF96
+:1074D000160FFCBC97BB0C5EB4AB55A5AB37468D05
+:1074E000C137A3ECC1AE00FB351DE9EBA67B8DF1E6
+:1074F000F61F5AD64ADE7ECC133190AB56922F90AF
+:107500009700BB30272F24DF50B9621AC69DCCB13B
+:10751000621ADA1990AB32EB1871257E59A2A1B725
+:107520001B2E2A43F7733E8FE749E7E47179E9B6EA
+:10753000D97DA837C7FBDEE2BFC53EC6FBDE2251C0
+:1075400033FC1ECA5B625C8482F740050BC279BFC4
+:10755000E3260BE66D068F5FA7BCEEE063E625FC35
+:10756000BEC0CC26417B4FC2AC96403BB275365F65
+:10757000273C87FB2DF5E9BAAFCF0B65448CE4853A
+:10758000C86FC808A77B125FE7E764B706BB732D17
+:10759000789FE1EB85E810E4A9FECFFF1D87F6D5C3
+:1075A000D7FD09BD07F3DDF894DE896D16EFF44EC3
+:1075B000748A7756BD4A047D1757F47121F6DB2291
+:1075C0004A7F7E80E789D5528DFF03E2DFC9B3C7CA
+:1075D0008E7F631CE6C0BC80123F561E25302F9064
+:1075E000AAE579012C312F909ACAF30208635E0054
+:1075F0004BCC0B603DE60510C6BC00C29817401886
+:10760000F30258625E00EBBF10DF3F0C8262E2F9CA
+:107610004A33E9F5B5F8BE1DF0B7F638BF775ADB47
+:107620002AD3FD2D7EFF80F66DD4BB9976F16EC610
+:10763000B38DEEF1EA3B642B92A85E377412F338F7
+:10764000F58724EB7AD42B8D4B68FDCDDDB91F94E3
+:10765000627DABCEAA51888F381D9B257AA75FDD4E
+:10766000DD4A79A7FCF8E37AAA6F9318E649EF356B
+:10767000F038D729436D16DD83921FEC34F452FCA9
+:1076800051734052CA03DF69CCB9467A40BD4FAE50
+:10769000E04DCCE93129E563BC031979772EDE4D45
+:1076A00057E03D33BE17976FD0BB7E2704A41390DD
+:1076B0000F77F0F7CF16F847F21EF2AEA9BAFBD05B
+:1076C000467C0F157ADF3CF23D5DC8BD73D96C7105
+:1076D000AF6CE3DF57143D5D7EB003D61BDE6A203E
+:1076E0007FA321D7F120F2D1499D9DF223278F9BC3
+:1076F000282E3ABFEDB6A0FCC85096A37A36E59B7B
+:10770000A650BE628D4E227BBCA028251EF1B8E09B
+:10771000948EEC4E4F56492DF65B334BA17C548131
+:1077200081FD82E611EFA5547A1434496E0DC02B09
+:107730009895DED92F073461BE725067DE84EF9AC8
+:107740009633FECE41E59B35DB24E21B4C10203EF8
+:10775000CB043E9777FFFE3ABE635869E07E6BA28A
+:1077600086DF5F276EE1EF191E640E3DDAD955C83A
+:107770005D32D9C7DF0D40BD237C4A12F7CB957827
+:107780009C7FC5691DBDB72D88FF719A83EC743E3F
+:10779000BD6390BCCBE49B778C2F3FA1EF184EEAE2
+:1077A000B85E013C523CD4837C4979190795A71BEC
+:1077B0002BA9AC13DF438C7EFF3F7416E3C4C4F8DF
+:1077C000082BEAB971BF770BFBFAEFBD768AF76B2E
+:1077D000899ABE6C05F1F127B315F1A1BE13ECB681
+:1077E0009534239DEC91CC65A1EFC14003025E0B63
+:1077F000F12012E6B53D76FCEE68E8B864A177C9E1
+:10780000A3F4E3B6C7F09D487DAA649114CC7F6FC2
+:107810002D88837D174E4FA67DD777F2FC286128EF
+:107820000EF3E79C5E91598EC3B373FDF5C5426EAE
+:107830007CD09FF3C977DDC86FDF206FBA17FBBB21
+:107840009889BEA7A63FD84FF11D53297FAAF2CD34
+:10785000705B7C0BF2CDEF67F338B2B4F47D1DDAC8
+:10786000FF9E6CC709DC4759F9B5C7E2E87C63E7BE
+:10787000AFD477EAA1F9AB40FDF9FFF13EFD9DC61B
+:10788000062ADF6B5C47656FA38BDA03F4FF7F8EFC
+:10789000A3FF43F39FE7B05F68FE93199528B29F5B
+:1078A00020DF3CDF1C92EF2C9AF0C026C0DF82ED77
+:1078B0007A2B56A9F94F7C3FBCD64CFAE0F2EC315A
+:1078C000F39E2ADECC94271D66A62CC4FFFCF4147C
+:1078D000AD06DABF107450F38E281F783E940F2C3B
+:1078E000513EB45ABF7CBCA00711CEE176DE45768E
+:1078F000DE4474DDB81EF407C02B9925487F5C0D6B
+:10790000D11F1070DC47DF55751B18E609D5779439
+:10791000F3A1F82A6B0C7DE2E1FA646A98E725FA94
+:10792000DEBF2E8CDEE79E14EFE14E6EE6EFE1CA7D
+:107930005909AD3B865E89447AAC9C3074F679E88F
+:10794000BFF2D766F257364EAAC8FB5BF4CAE06CAA
+:107950008E8F67F17705B45FF7BB024F48781FBA87
+:10796000E67E66433AABBF2B102FEEB3BFC5EF0ADE
+:10797000DC3667E237FF5D81CC39F1A581BF2B9002
+:10798000D93989C3EAEF0AB0F8D2717E57207B4E0D
+:10799000EEE8DF15983D87C739E3FDAE00F8937335
+:1079A000707F3A9BFD4E2C13C53E43BFA73D2DEE85
+:1079B000EF7A348E522C0B235D5AAAD7B873B07C61
+:1079C0005BE3F939D6033FE7E33E0A9FB2DD9E0E43
+:1079D00070A2C1437AB227CB5E80F583367B21AE9D
+:1079E000139A3747DA627C0FFB5984EDA1EFAE544E
+:1079F0007AAE98C3F9FE0151CE6D1AFB7BF207E611
+:107A0000F0EFD56EB56FD8EF7DB82F75FF6CEB8AB0
+:107A10001C92A72CFB32B1DF522C993926E8FBD4FB
+:107A2000D17CE612FBE2FC05FAACF83CF707A94C66
+:107A3000D3BAA3D17F9CFC883B1AF73BB979C884A1
+:107A4000DF41BCE81A32A17D7FF1E12113D6BF6886
+:107A5000E7EF9543E77F710EFF4E206DEE108D9F8F
+:107A600006FFDD4BFEF95034FA4F6995E737D27DBA
+:107A7000CB8199645FA609FB32ED91E99D03C06F4C
+:107A8000D39E8BA2FB6C961F4BEDD5462EA7D58FB0
+:107A9000941FE950E8BBADE2F301FECE4C37EC3B5E
+:107AA000C8FFD20EF3779700239E0EE808469E4546
+:107AB000FFCAC9F8BBCBC9426FA09F560A7AC15909
+:107AC000F9E675BAF7C7F1381FDED122FF75EA86ED
+:107AD000C5F769168C43572D59DF4371E18E917AB2
+:107AE00011671EDA887133F86F41F5D5E5AFF7A05D
+:107AF000BDA939105CEF6CB846F12BF86F41F5F772
+:107B0000FFFC9C9EFF7E41703DD07707F29B4ADFD1
+:107B1000933ACF4C8CF34E3AC3ACFCFDBE877EAF9C
+:107B2000A4457CFFBCE79FE7E7F0F7A29CDE30DED0
+:107B3000FDCDF8A389FABBE6B37494875B95AA5E82
+:107B40001AF9FD133D73517E6F5104E99D7A115767
+:107B5000D5955BC8CE27D619497F15C8615684478D
+:107B60007EFFA448167ACA43F2DF775734E5F1E87E
+:107B70000008C7CCA27B9FB8260E0F4D34907E28FC
+:107B8000D094D4EE87F24D4DF077EC2FA07E90513B
+:107B90007E793EB55EEFE1DF896B955C8C739B244B
+:107BA000FB73F8DD639324F2885566BA2F18C4FC82
+:107BB000229C677BB4FBB90A5867FB3D19E41F0F91
+:107BC00032AE4F5D4BF8BDD5F6E892D2D5D8BEF4B3
+:107BD000766A3FF297942773D07FAA0AB3A2FFB4C4
+:107BE000DDC6FDEBED8BD3A9FD98A4ACC773BB1E1E
+:107BF00061B4CEF6C5FCDCDB9F9C2ABEBF709B50F7
+:107C00009EB737DB27E17DD47C8BE30CD26BB2B817
+:107C10008FDB9E0CF5503E23952C7D10E799C5F720
+:107C20005B6753885E2797DEFEE43E85CC8817EFBE
+:107C300085EA1745501CFCBF93011353F046000022
+:107C4000000000000000000005001500000000001A
+:00000001FF
diff --git a/firmware/bnx2x-e1h-4.8.53.0.fw.ihex b/firmware/bnx2x-e1h-4.8.53.0.fw.ihex
deleted file mode 100644
index 48d7612..0000000
--- a/firmware/bnx2x-e1h-4.8.53.0.fw.ihex
+++ /dev/null
@@ -1,12028 +0,0 @@
-:10000000000039D8000000600000063000003A40CF
-:100010000000191C000040780000009C0000599866
-:10002000000082E400005A38000000D40000DD2007
-:100030000000C7CC0000DDF8000000780001A5C872
-:10004000000056980001A648000000C00001FCE82E
-:100050000000F1D40001FDB0000000040002EF88B0
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:1001800002040014000000FF02040018000000FF39
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200204203C00000000DE
-:100240000204204000000034020420440000003575
-:10025000060420480000001C020420B80000000131
-:10026000060420BC0000005F0204223807FFFFFFE5
-:100270000204223C0000003F0204224007FFFFFF6F
-:10028000020422440000000F010422480000000084
-:100290000104224C00000000010422500000000074
-:1002A0000104225400000000010422580000000054
-:1002B0000104225C00000000010422600000000034
-:1002C0000104226400000000010422680000000014
-:1002D0000104226C000000000104227000000000F4
-:1002E00001042274000000000104227800000000D4
-:1002F0000104227C000000000C042000000003E840
-:100300000A042000000000010B0420000000000A85
-:1003100002050044000000200205004800000032F1
-:10032000020500900215002002050094021500202D
-:1003300002050098000000300205009C0810000033
-:10034000020500A000000033020500A400000030F8
-:10035000020500A800000031020500AC0000000208
-:10036000020500B000000005020500B40000000610
-:10037000020500B800000002020500BC00000002F7
-:10038000020500C000000000020500C400000005D6
-:10039000020500C800000002020500CC00000002B7
-:1003A000020500D000000002020500D40000000198
-:1003B00002050114000000010205011C00000001FB
-:1003C00002050120000000020205020400000001F5
-:1003D0000205020C0000004002050210000000406F
-:1003E0000205021C0000002002050220000000138C
-:1003F0000205022400000020060502400000000A59
-:1004000004050280002000000205005000000007E3
-:100410000205005400000007020500580000000813
-:100420000205005C000000080205006000000001F9
-:100430000605006400000003020500D80000000665
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C000020500E00000000D020500E80000000742
-:1004D000020500F000000007020500F80000000718
-:1004E000020500E40000002D020500EC00000027DA
-:1004F000020500F400000027020500FC00000027B0
-:10050000020500E00000001D020500E800000017E1
-:10051000020500F000000017020500F800000017B7
-:10052000020500E40000003D020500EC0000003779
-:10053000020500F400000037020500FC000000374F
-:10054000020500E00000004D020500E80000004741
-:10055000020500F000000047020500F80000004717
-:10056000020500E40000006D020500EC00000067D9
-:10057000020500F400000067020500FC00000067AF
-:10058000020500E00000005D020500E800000057E1
-:10059000020500F000000057020500F800000057B7
-:1005A000020500E40000007D020500EC0000007779
-:1005B000020500F400000077020500FC000000774F
-:1005C0000406100002000020020600DC000000010A
-:1005D000010600D80000000004060200000302200B
-:1005E000020600DC00000000010600B80000000068
-:1005F000010600C800000000010600BC0000000069
-:10060000010600CC0000000007180400009B000059
-:1006100008180798000D0223071C0000325E000036
-:10062000071C800035960C98071D00001AEA19FE79
-:10063000081D43D057860225011800000000000065
-:10064000011800040000000001180008000000006C
-:100650000118000C0000000001180010000000004C
-:100660000118001400000000021800200000000122
-:1006700002180024000000020218002800000003F5
-:100680000218002C000000000218003000000004D6
-:1006900002180034000000010218003800000000B9
-:1006A0000218003C00000001021800400000000495
-:1006B0000218004400000000021800480000000179
-:1006C0000218004C00000003021800500000000057
-:1006D0000218005400000001021800580000000435
-:1006E0000218005C00000000021800600000000119
-:1006F00002180064000000030218006800000000F7
-:100700000218006C000000010218007000000004D4
-:1007100002180074000000000218007800000004B5
-:100720000218007C00000003061800800000000290
-:10073000021800A400003FFF021800A8000003FFF9
-:100740000218022400000000021802340000000019
-:100750000218024C00000000021802E4000000FF32
-:100760000618100000000400021B8BC000000001EE
-:10077000021B800000000034021B804000000018B3
-:10078000021B80800000000C021B80C000000020C3
-:100790000C1B83000007A1200A1B83000000013806
-:1007A0000B1B830000001388021B83C0000001F4B0
-:1007B000021B1480000000010A1B148000000000CE
-:1007C000061A1000000002B3041A1ACC0001022716
-:1007D000061AA020000000C8061AA00000000002AF
-:1007E000021A1AD000000000061A1AD800000004ED
-:1007F000061A367800000006061A3670000000025D
-:10080000061A500000000002061A500800000004FA
-:10081000061A501800000004061A502800000004B0
-:10082000061A503800000004061A50480000000460
-:10083000061A505800000004061A50680000000410
-:10084000061A507800000002061A4000000000025C
-:10085000061A400800000002041A62C000200228A4
-:10086000061A20000000016C061AB00000000028E3
-:10087000061AB1400000000C061A32C00000001237
-:10088000061A335000000064061A810800000002B6
-:10089000061A25B00000016C061AB0A0000000285E
-:1008A000061AB1700000000C061A3308000000128E
-:1008B000061A34E000000064061A811000000002ED
-:1008C000021A2B6000000000061A3000000000022F
-:1008D000041A300800050248061A301C0000000700
-:1008E000061A31C000000008061A5000000000027D
-:1008F000061A508000000012061A40000000000294
-:10090000021A2B6400000000061A303800000002B2
-:10091000041A30400005024D061A3054000000074A
-:10092000061A31E000000008061A5010000000020C
-:10093000061A50C800000012061A40080000000203
-:10094000021A2B6800000000061A30700000000236
-:10095000041A307800050252061A308C0000000795
-:10096000061A320000000008061A5020000000029B
-:10097000061A511000000012041A4010000202571B
-:10098000021A2B6C00000000061A30A800000002BA
-:10099000041A30B000050259061A30C400000007DE
-:1009A000061A322000000008061A5030000000022B
-:1009B000061A515800000012041A40180002025E84
-:1009C000021A2B7000000000061A30E0000000023E
-:1009D000041A30E800050260061A30FC0000000727
-:1009E000061A324000000008061A504000000002BB
-:1009F000061A51A000000012041A402000020265ED
-:100A0000021A2B7400000000061A311800000002C0
-:100A1000041A312000050267061A3134000000076D
-:100A2000061A326000000008061A5050000000024A
-:100A3000061A51E800000012041A40280002026C55
-:100A4000021A2B7800000000061A31500000000244
-:100A5000041A31580005026E061A316C00000007B6
-:100A6000061A328000000008061A506000000002DA
-:100A7000061A523000000012041A403000020273BD
-:100A8000021A2B7C00000000061A318800000002C8
-:100A9000041A319000050275061A31A400000007FF
-:100AA000061A32A000000008061A5070000000026A
-:100AB000061A527800000012041A40380002027A26
-:100AC0000200A294071D29110200A2980000000054
-:100AD0000200A29C009C04240200A2A000000000CE
-:100AE0000200A2A4000002090200A270000000009F
-:100AF0000200A274000000000200A27000000000CA
-:100B00000200A274000000000200A27000000000B9
-:100B10000200A274000000000200A27000000000A9
-:100B20000200A27400000000020100B400000001F5
-:100B3000020100B800000001020100DC0000000119
-:100B40000201010000000001020101040000000197
-:100B50000201007C00300000020100840000002837
-:100B60000201008C000000000201013000000004BE
-:100B70000201025C000000010201032800000000E5
-:100B800002016080000000010201055400000030F5
-:100B9000020100C400000001020100CC00000001BD
-:100BA000020100F800000001020100F00000000155
-:100BB00002010080003000000201008800000028CF
-:100BC0000201009000000000020101340000000456
-:100BD000020102DC000000010201032C0000000001
-:100BE0000201608400000001020105640000003081
-:100BF000020100C800000001020100D00000000155
-:100C0000020100FC00000001020100F400000001EC
-:100C1000020C100000000020020C2008000002114D
-:100C2000020C200C00000200020C20100000020444
-:100C3000020C201C0000FFFF020C20200000FFFF20
-:100C4000020C20240000FFFF020C20280000FFFF00
-:100C5000020C2038000000C6020C203C00000000FE
-:100C6000020C204000000034020C2044000000353B
-:100C7000060C20480000001C020C20B800000001F7
-:100C8000060C20BC0000005F020C223807FFFFFFAB
-:100C9000020C223C0000003F020C224007FFFFFF35
-:100CA000020C22440000000F010C2248000000004A
-:100CB000010C224C00000000010C2250000000003A
-:100CC000010C225400000000010C2258000000001A
-:100CD000010C225C00000000010C226000000000FA
-:100CE000010C226400000000010C226800000000DA
-:100CF000010C226C00000000010C227000000000BA
-:100D0000010C227400000000010C22780000000099
-:100D1000010C227C000000000C0C2000000003E805
-:100D20000A0C2000000000010B0C20000000000A4B
-:100D3000020C400800000411020C400C00000400EA
-:100D4000020C401000000404020C401400000421B6
-:100D5000020C401C0000FFFF020C40200000FFFFBF
-:100D6000020C40240000FFFF020C40280000FFFF9F
-:100D7000020C403800000046020C403C0000000518
-:100D8000020C404000000034020C404400000035DA
-:100D9000020C404800000007060C404C0000005BBD
-:100DA000020C41B800000001060C41BC0000000329
-:100DB000020C41C800000001060C41CC0000001BE1
-:100DC000020C423807FFFFFF020C423C0000003FCC
-:100DD000020C424007FFFFFF020C42440000000FDC
-:100DE000010C424800000000010C424C00000000D1
-:100DF000010C425000000000010C425400000000B1
-:100E0000010C425800000000010C425C0000000090
-:100E1000010C426000000000010C42640000000070
-:100E2000010C426800000000010C426C0000000050
-:100E3000010C427000000000010C42740000000030
-:100E4000010C427800000000010C427C0000000010
-:100E5000010C4280000000000C0C4000000003E880
-:100E60000A0C4000000000010B0C40000000000ACA
-:100E7000020D004400000032020D008C021500201B
-:100E8000020D009002150020020D009408100000D1
-:100E9000020D009800000033020D009C00000002CB
-:100EA000020D00A000000000020D00A400000005DB
-:100EB000020D00A800000005060D00AC00000002B5
-:100EC000020D00B400000002020D00B80000000393
-:100ED000020D00BC00000002020D00C00000000175
-:100EE000020D00C800000002020D00CC000000024C
-:100EF000020D010800000001020D015C000000016C
-:100F0000020D016400000001020D016800000002F2
-:100F1000020D020400000001020D020C000000207E
-:100F2000020D021000000040020D021400000040FB
-:100F3000020D022000000003020D02240000001830
-:100F4000060D028000000012040D03000024027C44
-:100F5000020D004C00000001020D005000000002D4
-:100F6000020D005400000008020D005800000008A7
-:100F7000060D005C00000004020D00C40000000427
-:100F8000020D000400000001020D00080000000135
-:100F9000020D000C00000001020D00100000000115
-:100FA000020D001400000001020D001800000001F5
-:100FB000020D001C00000001020D002000000001D5
-:100FC000020D002400000001020D002800000001B5
-:100FD000020D002C00000001020D00300000000195
-:100FE000020D003400000001020D00380000000175
-:100FF000020D003C00000001020D01140000000978
-:10100000020D011C0000000A020D0124000000076F
-:10101000020D012C00000007020D01340000000C3D
-:10102000020D013C0000000B020D0144000000070E
-:10103000020D011800000029020D01200000002A05
-:10104000020D012800000027020D013000000027DA
-:10105000020D01380000002C020D01400000002BA1
-:10106000020D014800000027020D011400000019C4
-:10107000020D011C0000001A020D012400000017DF
-:10108000020D012C00000017020D01340000001CAD
-:10109000020D013C0000001B020D0144000000177E
-:1010A000020D011800000039020D01200000003A75
-:1010B000020D012800000037020D0130000000374A
-:1010C000020D01380000003C020D01400000003B11
-:1010D000020D014800000037020D01140000004914
-:1010E000020D011C0000004A020D0124000000470F
-:1010F000020D012C00000047020D01340000004CDD
-:10110000020D013C0000004B020D014400000047AD
-:10111000020D011800000069020D01200000006AA4
-:10112000020D012800000067020D01300000006779
-:10113000020D01380000006C020D01400000006B40
-:10114000020D014800000067020D01140000005963
-:10115000020D011C0000005A020D0124000000577E
-:10116000020D012C00000057020D01340000005C4C
-:10117000020D013C0000005B020D0144000000571D
-:10118000020D011800000079020D01200000007A14
-:10119000020D012800000077020D013000000077E9
-:1011A000020D01380000007C020D01400000007BB0
-:1011B000020D014800000077020E004C00000032D2
-:1011C000020E009402150020020E00980215002065
-:1011D000020E009C00000030020E00A0081000006B
-:1011E000020E00A400000033020E00A80000003030
-:1011F000020E00AC00000031020E00B00000000240
-:10120000020E00B400000004020E00B8000000004E
-:10121000020E00BC00000002020E00C0000000022E
-:10122000020E00C400000000020E00C80000000210
-:10123000020E00CC00000007020E00D000000002E9
-:10124000020E00D400000002020E00D800000001CF
-:10125000020E00E400000001020E01440000000143
-:10126000020E014C00000001020E015000000002BD
-:10127000020E020400000001020E020C00000040F9
-:10128000020E021000000040020E021C00000004CA
-:10129000020E022000000020020E02240000000EB8
-:1012A000020E02280000001B060E030000000012C0
-:1012B000040E0280001B02A0020E00540000001069
-:1012C000020E005800000007020E005C0000000F34
-:1012D000020E006000000010020E00640000000B0F
-:1012E000060E006800000003020E00DC0000000390
-:1012F000020E000400000001020E000800000001C0
-:10130000020E000C00000001020E0010000000019F
-:10131000020E001400000001020E0018000000017F
-:10132000020E001C00000001020E0020000000015F
-:10133000020E002400000001020E0028000000013F
-:10134000020E002C00000001020E0030000000011F
-:10135000020E003400000001020E003800000001FF
-:10136000020E003C00000001020E004000000001DF
-:10137000020E004400000001020E01100000000FE8
-:10138000020E01180000000E020E012000000000F5
-:10139000020E012800000000020E01140000002FC0
-:1013A000020E011C0000002E020E012400000000AD
-:1013B000020E012C00000000020E01100000001FB0
-:1013C000020E01180000001E020E012000000000A5
-:1013D000020E012800000000020E01140000003F70
-:1013E000020E011C0000003E020E0124000000005D
-:1013F000020E012C00000000020E01100000004F40
-:10140000020E01180000004E020E01200000000034
-:10141000020E012800000000020E01140000006FFF
-:10142000020E011C0000006E020E012400000000EC
-:10143000020E012C00000000020E01100000005FEF
-:10144000020E01180000005E020E012000000000E4
-:10145000020E012800000000020E01140000007FAF
-:10146000020E011C0000007E020E0124000000009C
-:10147000020E012C000000000730040000D2000022
-:10148000083007A8000B02BB0734000031B600008B
-:101490000734800036500C6E0735000037591A03A8
-:1014A00007358000286127DA0835FF40401802BD63
-:1014B00001300000000000000130000400000000C6
-:1014C00001300008000000000130000C00000000A6
-:1014D0000130001000000000013000140000000086
-:1014E0000230002000000001023000240000000251
-:1014F00002300028000000030230002C0000000031
-:10150000023000300000000402300034000000010E
-:1015100002300038000000000230003C00000001F2
-:1015200002300040000000040230004400000000CF
-:1015300002300048000000010230004C00000003AF
-:101540000230005000000000023000540000000192
-:1015500002300058000000040230005C000000006F
-:10156000023000600000000102300064000000034F
-:1015700002300068000000000230006C0000000132
-:10158000023000700000000402300074000000000F
-:1015900002300078000000040230007C00000003EC
-:1015A0000630008000000002023000A400003FFF6F
-:1015B000023000A8000003FF0230022400000000F7
-:1015C00002300234000000000230024C0000000033
-:1015D000023002E40000FFFF063020000000080097
-:1015E00002338BC000000001023380000000001AAB
-:1015F000023380400000004E023380800000001063
-:10160000023380C0000000200C3383000007A120BB
-:101610000A338300000001380B3383000000138875
-:10162000023383C0000001F40C3383801DCD6500BC
-:101630000A3383800004C4B40B338380004C4B40D6
-:101640000A331480000000000233148000000001FF
-:10165000063220000000010206328980000000C826
-:1016600006328960000000020632322800000004C1
-:10167000063232000000000904323224000102BFA9
-:1016800006323180000000200632500000000400C5
-:10169000063240000000000204324008000102C08F
-:1016A0000632400C0000000306326B6800000002A6
-:1016B00004326B70000202C106326B10000000029F
-:1016C000043274C0000202C30233080001000000AB
-:1016D00004330C00001002C50233080000000000B3
-:1016E00004330C40001002D506329000000000A028
-:1016F0000632950000000040063297000000003CD2
-:1017000006322450000000B406322AD00000000245
-:101710000632308000000020063280000000012CDC
-:101720000232323800000000063250000000002073
-:101730000632510000000020063252000000002056
-:101740000632530000000020063254000000002042
-:10175000063255000000002006325600000000202E
-:10176000063257000000002006325800000000201A
-:10177000063259000000002006325A000000002006
-:1017800006325B000000002006325C0000000020F2
-:1017900006325D000000002006325E0000000020DE
-:1017A00006325F000000002006326B780000005215
-:1017B00006326E080000000C06329280000000A085
-:1017C0000632960000000040063297F00000003C10
-:1017D00006322720000000B406322AD8000000029A
-:1017E0000632310000000020063284B00000012CD7
-:1017F0000232323C0000000006325080000000201F
-:101800000632518000000020063252800000002085
-:101810000632538000000020063254800000002071
-:10182000063255800000002006325680000000205D
-:101830000632578000000020063258800000002049
-:10184000063259800000002006325A800000002035
-:1018500006325B800000002006325C800000002021
-:1018600006325D800000002006325E80000000200D
-:1018700006325F800000002006326CC0000000527B
-:1018800006326E380000000C02322A3000000000E0
-:10189000063230000000000406324018000000024A
-:1018A00002322A340000000006323010000000042A
-:1018B000063240280000000202322A3800000000F0
-:1018C00006323020000000040632403800000002DA
-:1018D00002322A3C000000000632303000000004D2
-:1018E000063240480000000202322A400000000098
-:1018F000063230400000000406324058000000026A
-:1019000002322A4400000000063230500000000479
-:10191000063240680000000202322A48000000003F
-:1019200006323060000000040632407800000002F9
-:1019300002322A4C00000000063230700000000421
-:1019400006324088000000020720040000740000F6
-:1019500008200780001002E507240000322600005E
-:1019600007248000246E0C8A0824CBB064F002E7C0
-:101970000120000000000000012000040000000021
-:1019800001200008000000000120000C0000000001
-:1019900001200010000000000120001400000000E1
-:1019A00002200020000000010220002400000002AC
-:1019B00002200028000000030220002C000000008C
-:1019C000022000300000000402200034000000016A
-:1019D00002200038000000000220003C000000014E
-:1019E000022000400000000402200044000000002B
-:1019F00002200048000000010220004C000000030B
-:101A000002200050000000000220005400000001ED
-:101A100002200058000000040220005C00000000CA
-:101A200002200060000000010220006400000003AA
-:101A300002200068000000000220006C000000018D
-:101A4000022000700000000402200074000000006A
-:101A500002200078000000040220007C0000000347
-:101A60000620008000000002022000A400003FFFCA
-:101A7000022000A8000003FF022002240000000052
-:101A800002200234000000000220024C000000008E
-:101A9000022002E40000FFFF0620200000000800F2
-:101AA00002238BC000000001022380000000001010
-:101AB00002238040000000120223808000000030DA
-:101AC000022380C00000000E022383C0000001F446
-:101AD00002231480000000010A231480000000008B
-:101AE000062210000000004206227020000000C8FC
-:101AF0000622700000000002022211E8000000002F
-:101B000006223000000000C0062240700000008065
-:101B10000622528000000004062267000000010037
-:101B2000062290000000040004226B08002002E955
-:101B300002230800013FFFFF04230C0000100309EB
-:101B4000022308000000000004230C4000100319C9
-:101B500006228000000000A0062285000000004050
-:101B6000062287000000003C0622404000000006DC
-:101B700006228280000000A00622860000000040AD
-:101B8000062287F00000003C0622405800000006B4
-:101B9000022211480000000006223300000000026B
-:101BA00006226040000000300222114C00000000BC
-:101BB0000622330800000002062261000000003007
-:101BC0000222115000000000062233100000000223
-:101BD000062261C000000030022211540000000003
-:101BE0000622331800000002062262800000003046
-:101BF00002221158000000000622332000000002DB
-:101C000006226340000000300222115C0000000048
-:101C10000622332800000002062264000000003083
-:101C20000222116000000000062233300000000292
-:101C3000062264C00000003002221164000000008F
-:101C400006223338000000020622658000000030C2
-:101C50000216100000000020021700080000000219
-:101C60000217002C000000030217003C00000004D3
-:101C7000021700440000000802170048000000029C
-:101C80000217004C00000090021700500000009066
-:101C9000021700540080009002170058081400003A
-:101CA000021700600000008A021700640000008034
-:101CB00002170068000000900217006C000000800E
-:101CC000021700700000000602170078000007D01D
-:101CD0000217007C0000076C02170038007C10041B
-:101CE000021700040000000F061640240000000246
-:101CF000021640700000001C02164208000000019D
-:101D000002164210000000010216422000000001ED
-:101D100002164228000000010216423000000001B5
-:101D20000216423800000001021642600000000264
-:101D30000C16401C0003D0900A16401C0000009CAA
-:101D40000B16401C000009C40216403000000008B9
-:101D5000021640340000000C02164038000000104B
-:101D6000021640440000002002164000000000015E
-:101D7000021640D8000000010216400800000001D1
-:101D80000216400C00000001021640100000000185
-:101D90000216424000000000021642480000000007
-:101DA00006164270000000020216425000000000B9
-:101DB0000216425800000000061642800000000291
-:101DC00002166008000004240216600C00000410D3
-:101DD00002166010000004140216601C0000FFFFD1
-:101DE000021660200000FFFF021660240000FFFFC3
-:101DF000021660280000FFFF021660380000002075
-:101E00000216603C00000020021660400000003412
-:101E100002166044000000350216604800000023EE
-:101E20000216604C000000240216605000000025DD
-:101E300002166054000000260216605800000027B9
-:101E40000216605C00000029021660600000002A93
-:101E5000021660640000002B021660680000002C6F
-:101E60000216606C0000002D061660700000005223
-:101E7000021661B800000001061661BC0000001FD8
-:101E80000216623807FFFFFF0216623C0000003FA7
-:101E90000216624007FFFFFF021662440000000FB7
-:101EA00001166248000000000116624C00000000AC
-:101EB000011662500000000001166254000000008C
-:101EC00001166258000000000116625C000000006C
-:101ED000011662600000000001166264000000004C
-:101EE00001166268000000000116626C000000002C
-:101EF000011662700000000001166274000000000C
-:101F000001166278000000000116627C00000000EB
-:101F10000C166000000003E80A16600000000001D3
-:101F20000B1660000000000A021680400000000648
-:101F30000216804400000005021680480000000AD6
-:101F40000216804C000000050216805400000002BA
-:101F5000021680CC00000004021680D000000004AD
-:101F6000021680D400000004021680D8000000048D
-:101F7000021680DC00000004021680E0000000046D
-:101F8000021680E400000004021680E8000000044D
-:101F90000216880400000004021680300000007C55
-:101FA000021680340000003D021680380000003F19
-:101FB0000216803C0000009C021680F00000000722
-:101FC000061680F4000000050216880C01010101CC
-:101FD00002168108000000000216810C00000004B7
-:101FE0000216811000000004021681140000000295
-:101FF000021688100801200402168118000000054E
-:102000000216811C00000005021681200000000558
-:1020100002168124000000050216882C20081001F9
-:1020200002168128000000080216812C000000061C
-:102030000216813000000007021681340000000003
-:1020400002168830010101200616813800000004C4
-:1020500002168834010101010216814800000000C7
-:102060000216814C0000000402168150000000049A
-:10207000021681540000000202168838080120046C
-:1020800002168158000000050216815C0000000560
-:102090000216816000000005021681640000000540
-:1020A0000216883C20081001021681680000000812
-:1020B0000216816C00000006021681700000000705
-:1020C00002168174000000010216884001010120FF
-:1020D00002168178000000010216817C00000001D8
-:1020E00002168180000000010216818400000001B8
-:1020F00002168844010101010216818800000001D6
-:102100000216818C00000004021681900000000479
-:10211000021681940000000202168848080120047B
-:1021200002168198000000050216819C000000053F
-:10213000021681A000000005021681A4000000051F
-:102140000216881420081001021681A80000000859
-:10215000021681AC00000006021681B000000007E4
-:10216000021681B400000001021688180101012046
-:10217000021681B800000001021681BC00000001B7
-:10218000021681C000000001021681C40000000197
-:102190000216881C01010101021681C8000000011D
-:1021A000021681CC00000004021681D00000000459
-:1021B000021681D4000000020216882008012004C3
-:1021C000021681D800000005021681DC000000051F
-:1021D000021681E000000005021681E400000005FF
-:1021E0000216882420081001021681E80000000869
-:1021F000021681EC00000006021681F000000007C4
-:102200000216E40C000000000216882801010120DB
-:102210000616E410000000040216E00001010101AE
-:102220000216E420000000000216E424000000046E
-:102230000216E428000000040216E42C000000024C
-:102240000216E004080120040216E4300000000534
-:102250000216E434000000050216E4380000000510
-:102260000216E43C000000050216E00820081001F8
-:102270000216E440000000080216E44400000006D4
-:102280000216E448000000070216E44C00000000BB
-:102290000216E00C010101200616E45000000004C3
-:1022A0000216E010010101010216E46000000000C6
-:1022B0000216E464000000040216E4680000000452
-:1022C0000216E46C000000020216E014080120046B
-:1022D0000216E470000000050216E4740000000518
-:1022E0000216E478000000050216E47C00000005F8
-:1022F0000216E018200810010216E4800000000811
-:102300000216E484000000060216E48800000007BC
-:102310000216E48C000000010216E01C01010120FD
-:102320000216E490000000010216E494000000018F
-:102330000216E498000000010216E49C000000016F
-:102340000216E020010101010216E4A000000001D4
-:102350000216E4A4000000040216E4A80000000431
-:102360000216E4AC000000020216E024080120047A
-:102370000216E4B0000000050216E4B400000005F7
-:102380000216E4B8000000050216E4BC00000005D7
-:102390000216E028200810010216E4C00000000820
-:1023A0000216E4C4000000060216E4C8000000079C
-:1023B0000216E4CC000000010216E02C010101200D
-:1023C0000216E4D0000000010216E4D4000000016F
-:1023D0000216E4D8000000010216E4DC000000014F
-:1023E0000216E030010101010216E4E000000001E4
-:1023F0000216E4E4000000040216E4E80000000411
-:102400000216E4EC000000020216E0340801200489
-:102410000216E4F0000000050216E4F400000005D6
-:102420000216E4F8000000050216E4FC00000005B6
-:102430000216E038200810010216E500000000082E
-:102440000216E504000000060216E5080000000779
-:102450000216E03C0101012002168240003F003FCD
-:1024600002168244000000000216E524003F003FEF
-:102470000216E52800000000021682480000000055
-:102480000216824C003F003F0216E52C00000000BF
-:102490000216E530003F003F0216825001000100A5
-:1024A00002168254010001000216E5340100010009
-:1024B0000216E538010001000616825800000002ED
-:1024C0000216E53C000000000216E5400000000096
-:1024D0000216826000C000C00216826400C000C004
-:1024E0000216E54400C000C00216E54800C000C066
-:1024F000021682681E001E000216826C1E001E005C
-:102500000216E54C1E001E000216E5501E001E00BD
-:1025100002168270400040000216827440004000A3
-:102520000216E554400040000216E5584000400005
-:1025300002168278800080000216827C8000800073
-:102540000216E55C800080000216E56080008000D5
-:1025500002168280200020000216828420002000C3
-:102560000216E564200020000216E5682000200025
-:1025700006168288000000020216E56C00000000CA
-:102580000216E570000000000216829000000000B4
-:1025900002168294000000000216E574000000009C
-:1025A0000216E57800000000021682980000000084
-:1025B0000216829C000000000216E57C000000006C
-:1025C0000216E58000000000021682A00000000054
-:1025D000021682A400000001061682A80000000A6C
-:1025E000021681F400000C08021681F80000004079
-:1025F000021681FC0000010002168200000000208B
-:1026000002168204000000170216820800000080F3
-:102610000216820C00000200021682100000000068
-:102620000216821801FF01FF0216821401FF01FF4A
-:102630000216E51001FF01FF0216E50C01FF01FF84
-:102640000216823C00000013021680900000013F39
-:102650000216806000000140021680640000014004
-:10266000061680680000000202168070000000C09C
-:1026700006168074000000070216809C00000048C7
-:10268000021680A000000048061680A40000000288
-:10269000021680AC00000048061680B0000000075B
-:1026A000021682380000800002168234000025E401
-:1026B0000216809400007FFF0216822000070007A8
-:1026C0000216821C000700070216E5180007000723
-:1026D0000216E51400070007021682280000000019
-:1026E00002168224FFFFFFFF0216E5200000000013
-:1026F0000216E51CFFFFFFFF0216E6BC000000000B
-:102700000216E6C0000000020216E6C40000000146
-:102710000216E6C8000000030216E6CC0000000422
-:102720000216E6D0000000060216E6D400000005FE
-:102730000216E6D800000007021680EC000000FF39
-:1027400002140000000000010214000C000000014F
-:1027500002140040000000010214004400007FFF4A
-:102760000214000C00000000021400000000000031
-:102770000214006C000000000214000400000001BC
-:1027800002140030000000010214000400000000E8
-:102790000214005C000000000214000800000001A8
-:1027A00002140034000000010214000800000000C0
-:1027B0000214006000000000020200580000003215
-:1027C000020200A003150020020200A4031500204D
-:1027D000020200A801000030020200AC0810000054
-:1027E000020200B000000033020200B4000000301A
-:1027F000020200B800000031020200BC0000000329
-:10280000020200C000000006020200C40000000333
-:10281000020200C800000003020200CC0000000217
-:10282000020200D000000000020200D400000002FA
-:10283000020200DC00000000020200E000000006CE
-:10284000020200E400000004020200E800000002AE
-:10285000020200EC00000002020200F00000000191
-:10286000020200FC0000000602020120000000003D
-:102870000202013400000002020201B00000000167
-:102880000202020C0000000102020214000000011A
-:10289000020202180000000202020404000000010B
-:1028A0000202040C0000004002020410000000407C
-:1028B0000202041C000000040202042000000020A8
-:1028C000020204240000000202020428000000208A
-:1028D000060205000000001204020480001F032904
-:1028E000020200600000000F020200640000000706
-:1028F000020200680000000B0202006C0000000EE3
-:10290000020200700000000E0602007400000003C6
-:10291000020200F4000000040202000400000001B2
-:1029200002020008000000010202000C0000000189
-:102930000202001000000001020200140000000169
-:1029400002020018000000010202001C0000000149
-:102950000202002000000001020200240000000129
-:1029600002020028000000010202002C0000000109
-:1029700002020030000000010202003400000001E9
-:1029800002020038000000010202003C00000001C9
-:1029900002020040000000010202004400000001A9
-:1029A00002020048000000010202004C0000000189
-:1029B000020200500000000102020108000000C8ED
-:1029C0000202011800000002020201C4000000001F
-:1029D000020201CC00000000020201D4000000024B
-:1029E000020201DC00000002020201E4000000FF1C
-:1029F000020201EC000000FF0202010000000000E2
-:102A00000202010C000000C80202011C00000002CA
-:102A1000020201C800000000020201D00000000014
-:102A2000020201D800000002020201E000000002E0
-:102A3000020201E8000000FF020201F0000000FFB6
-:102A4000020201040000000002020108000000C8A8
-:102A50000202011800000002020201C4000000008E
-:102A6000020201CC00000000020201D400000002BA
-:102A7000020201DC00000002020201E4000000FF8B
-:102A8000020201EC000000FF020201000000000051
-:102A90000202010C000000C80202011C000000023A
-:102AA000020201C800000000020201D00000000084
-:102AB000020201D800000002020201E00000000250
-:102AC000020201E8000000FF020201F0000000FF26
-:102AD000020201040000000002020108000000C818
-:102AE0000202011800000002020201C400000000FE
-:102AF000020201CC00000000020201D4000000022A
-:102B0000020201DC00000002020201E4000000FFFA
-:102B1000020201EC000000FF0202010000000000C0
-:102B20000202010C000000C80202011C00000002A9
-:102B3000020201C800000000020201D000000000F3
-:102B4000020201D800000002020201E000000002BF
-:102B5000020201E8000000FF020201F0000000FF95
-:102B6000020201040000000002020108000000C887
-:102B70000202011800000002020201C4000000006D
-:102B8000020201CC00000000020201D40000000299
-:102B9000020201DC00000002020201E4000000FF6A
-:102BA000020201EC000000FF020201000000000030
-:102BB0000202010C000000C80202011C0000000219
-:102BC000020201C800000000020201D00000000063
-:102BD000020201D800000002020201E0000000022F
-:102BE000020201E8000000FF020201F0000000FF05
-:102BF00002020104000000000728040000BD0000DC
-:102C0000082807A8000B0348072C00003406000022
-:102C1000072C800037960D02072D00003BC31AE8F1
-:102C2000072D8000382629D9072E0000124537E3EA
-:102C3000082E22203BBC034A0128000000000000AF
-:102C40000128000400000000012800080000000026
-:102C50000128000C00000000012800100000000006
-:102C600001280014000000000228002000000001DC
-:102C700002280024000000020228002800000003AF
-:102C80000228002C00000000022800300000000490
-:102C90000228003400000001022800380000000073
-:102CA0000228003C0000000102280040000000044F
-:102CB0000228004400000000022800480000000133
-:102CC0000228004C00000003022800500000000011
-:102CD00002280054000000010228005800000004EF
-:102CE0000228005C000000000228006000000001D3
-:102CF00002280064000000030228006800000000B1
-:102D00000228006C0000000102280070000000048E
-:102D1000022800740000000002280078000000046F
-:102D20000228007C0000000306280080000000024A
-:102D3000022800A400003FFF022800A8000003FFB3
-:102D400002280224000000000228023400000000D3
-:102D50000228024C00000000022802E40000FFFFED
-:102D60000628200000000800022B8BC00000000194
-:102D7000022B800000000000022B804000000018A1
-:102D8000022B80800000000C022B80C00000006637
-:102D90000C2B83000007A1200A2B830000000138C0
-:102DA0000B2B830000001388022B83C0000001F46A
-:102DB0000C2B8340000001F40A2B8340000000002C
-:102DC0000B2B8340000000050A2B83800004C4B451
-:102DD0000C2B83801DCD65000A2B148000000000A1
-:102DE0000B2B8380004C4B40022B14800000000111
-:102DF000062A29C800000004042A29D80002034C2E
-:102E0000062A208000000048062A9020000000C802
-:102E1000062A900000000002062A21A80000008671
-:102E2000062A200000000020022A23C8000000001B
-:102E3000042A23D00002034E042A249800040350DD
-:102E4000022A2C2000000000022A2C1000000000A2
-:102E5000042A2C0800020354022A3010000000014A
-:102E6000062A404000000010042A400000100356CB
-:102E7000062A6AC000000002062A6B000000000457
-:102E8000042A840800020366022B080000000000E8
-:102E9000042B0C0000100368022B08000100000046
-:102EA000042B0C4000080378022B080002000000ED
-:102EB000042B0C6000080380062AC000000000FC00
-:102EC000062A24A800000014062A25480000002431
-:102ED000062A266800000024062A2788000000240D
-:102EE000062A28A800000024062AA00000000028C6
-:102EF000062AA1400000000C042A29E000020388F1
-:102F0000022A300000000001062A502000000002C2
-:102F1000062A503000000002062A5000000000027D
-:102F2000062A501000000002022A52080000000188
-:102F3000042A6AC80002038A062A6B1000000042B5
-:102F4000062A6D2000000004062AC3F0000000FCE1
-:102F5000062A24F800000014062A25D800000024C0
-:102F6000062A26F800000024062A2818000000245B
-:102F7000062A293800000024062AA0A00000002804
-:102F8000062AA1700000000C042A29E80002038C24
-:102F9000022A300400000001062A50280000000226
-:102FA000062A503800000002062A500800000002DD
-:102FB000062A501800000002022A520C00000001EC
-:102FC000042A6AD00002038E062A6C180000004210
-:102FD000062A6D3000000004022AC7E0000000004D
-:102FE000042A29F000100390062A50480000000E21
-:102FF000022AC7E400000000042A2A30001003A0BF
-:10300000062A50800000000E022AC7E800000000D7
-:10301000042A2A70001003B0062A50B80000000EDF
-:10302000022AC7EC00000000042A2AB0001003C0E6
-:10303000062A50F00000000E022AC7F0000000002F
-:10304000042A2AF0001003D0062A51280000000E9E
-:10305000022AC7F400000000042A2B30001003E00D
-:10306000062A51600000000E022AC7F80000000086
-:10307000042A2B70001003F0062A51980000000E5D
-:10308000022AC7FC00000000042A2BB00010040034
-:10309000062A51D00000000E0210100800000001A6
-:1030A0000210105000000001021010000003D000B8
-:1030B000021010040000003D091018000200041066
-:1030C0000910110000280610061011A000000018B9
-:1030D00006102400000000E00210201C0000000088
-:1030E0000210202000000001021020C00000000299
-:1030F000021020040000000102102008000000015E
-:1031000009103C0000050638091038000005063D8E
-:10311000091038200005064206104C00000001008E
-:1031200002104028000000100210404400003FFF41
-:103130000210405800280000021040840084924A87
-:1031400002104058000000000210800000001080B3
-:10315000021080AC00000000021080380000001057
-:103160000210810000000000061081200000000213
-:1031700002108008000002B502108010000000005C
-:10318000061082000000004A021081080001FFFFC3
-:1031900006108140000000020210800000001A802A
-:1031A0000610900000000024061091200000004A44
-:1031B000061093700000004A061095C00000004AF7
-:1031C0000210800400001080021080B00000000196
-:1031D0000210803C0000001002108104000000007A
-:1031E00006108128000000020210800C000002B5C9
-:1031F0000210801400000000061084000000004A45
-:103200000210810C0001FFFF06108148000000023F
-:103210000210800400001A80061090900000002424
-:10322000061092480000004A061094980000004AD8
-:10323000061096E80000004A02108000000010808E
-:10324000021080AC00000002021080380000001064
-:103250000210810000000000061081200000000222
-:1032600002108008000002B502108010000000006B
-:10327000061082000000004A021081080001FFFFD2
-:1032800006108140000000020210800000001A8039
-:103290000610900000000024061091200000004A53
-:1032A000061093700000004A061095C00000004A06
-:1032B0000210800400001080021080B000000003A3
-:1032C0000210803C00000010021081040000000089
-:1032D00006108128000000020210800C000002B5D8
-:1032E0000210801400000000061084000000004A54
-:1032F0000210810C0001FFFF06108148000000024F
-:103300000210800400001A80061090900000002433
-:10331000061092480000004A061094980000004AE7
-:10332000061096E80000004A02108000000010809D
-:10333000021080AC00000004021080380000001071
-:103340000210810000000000061081200000000231
-:1033500002108008000002B502108010000000007A
-:10336000061082000000004A021081080001FFFFE1
-:1033700006108140000000020210800000001A8048
-:103380000610900000000024061091200000004A62
-:10339000061093700000004A061095C00000004A15
-:1033A0000210800400001080021080B000000005B0
-:1033B0000210803C00000010021081040000000098
-:1033C00006108128000000020210800C000002B5E7
-:1033D0000210801400000000061084000000004A63
-:1033E0000210810C0001FFFF06108148000000025E
-:1033F0000210800400001A80061090900000002443
-:10340000061092480000004A061094980000004AF6
-:10341000061096E80000004A0210800000001080AC
-:10342000021080AC0000000602108038000000107E
-:103430000210810000000000061081200000000240
-:1034400002108008000002B5021080100000000089
-:10345000061082000000004A021081080001FFFFF0
-:1034600006108140000000020210800000001A8057
-:103470000610900000000024061091200000004A71
-:10348000061093700000004A061095C00000004A24
-:103490000210800400001080021080B000000007BD
-:1034A0000210803C000000100210810400000000A7
-:1034B00006108128000000020210800C000002B5F6
-:1034C0000210801400000000061084000000004A72
-:1034D0000210810C0001FFFF06108148000000026D
-:1034E0000210800400001A80061090900000002452
-:1034F000061092480000004A061094980000004A06
-:10350000061096E80000004A021205B00000000113
-:103510000212049000E383400212051400003C10E4
-:103520000212066C0000000102120670000000008A
-:1035300002120494FFFFFFFF02120498FFFFFFFF37
-:103540000212049CFFFFFFFF021204A0FFFFFFFF17
-:10355000021204A4FFFFFFFF021204A8FFFFFFFFF7
-:10356000021204ACFFFFFFFF021204B0FFFFFFFFD7
-:10357000021204BCFFFFFFFF021204C0FFFFFFFFA7
-:10358000021204C4FFFFFFFF021204C8FFFFFFFF87
-:10359000021204CCFFFFFFFF021204D0FFFFFFFF67
-:1035A000021204D8FFFFFFFF021204DCFFFFFFFF3F
-:1035B000021204E0FFFFFFFF021204E4FFFFFFFF1F
-:1035C000021204E8FFFFFFFF021204ECFFFFFFFFFF
-:1035D000021204F0FFFFFFFF021204F4FFFFFFFFDF
-:1035E000021204F8FFFFFFFF021204FCFFFFFFFFBF
-:1035F00002120500FFFFFFFF02120504FFFFFFFF9D
-:1036000002120508FFFFFFFF0212050CFFFFFFFF7C
-:1036100002120510FFFFFFFF021204D4FF802000FA
-:10362000021204B4F0005000021204B8F00080004E
-:1036300002120390000000080212039C0000000820
-:10364000021203A000000008021203A400000002FE
-:10365000021203BC00000004021203C000000005B7
-:10366000021203C400000004021203D00000000094
-:103670000212036C00000001021203680000003F08
-:10368000021201BC00000040021201C00000180834
-:10369000021201C400000803021201C8000008035E
-:1036A000021201CC00000040021201D00000000311
-:1036B000021201D400000803021201D8000008031E
-:1036C000021201DC00000803021201E00001000305
-:1036D000021201E400000803021201E800000803DE
-:1036E000021201EC00000003021201F000000003CE
-:1036F000021201F400000003021201F800000003AE
-:10370000021201FC0000000302120200000000038C
-:10371000021202040000000302120208000000036B
-:103720000212020C0000000302120210000000034B
-:10373000021202140000000302120218000000032B
-:103740000212021C0000000302120220000000030B
-:1037500002120224000000030212022800002403C7
-:103760000212022C0000002F021202300000000999
-:103770000212023400000019021202380000018413
-:103780000212023C00000183021202400000030604
-:103790000212024400000019021202480000000652
-:1037A0000212024C0000030602120250000003063F
-:1037B00002120254000003060212025800000C8696
-:1037C0000212025C000003060212026000000306FF
-:1037D00002120264000000060212026800000006E5
-:1037E0000212026C000000060212027000000006C5
-:1037F00002120274000000060212027800000006A5
-:103800000212027C00000006021202800000000684
-:103810000212028400000006021202880000000664
-:103820000212028C00000006021202900000000644
-:103830000212029400000006021202980000000624
-:103840000212029C00000006021202A00000030601
-:10385000021202A400000013021202A800000006D7
-:10386000021202B000001004021202B400001004A0
-:103870000212032400106440021203280010644066
-:10388000021205B400000001021201B000000001A4
-:103890000600A000000000160200A0EC5554000035
-:1038A0000200A0F0555555550200A0F400005555F2
-:1038B0000200A0F8F00000000200A0FC5554000037
-:1038C0000200A100555555550200A10400005555B0
-:1038D0000200A108F00000000200A18C5554000075
-:1038E0000200A190555555550200A1940000555570
-:1038F0000200A198F00000000200A19C000000005E
-:103900000200A1A0000100000200A1A400005014C8
-:103910000200A1A8000000000200A45C00000C004E
-:103920000200A61C000000030200A06CFF5C000067
-:103930000200A070FFF55FFF0200A0740000FFFF0F
-:103940000200A078F00003E00200A07C000000006C
-:103950000200A0800000A0000600A0840000000576
-:103960000200A0980FE000000600A09C00000007E5
-:103970000200A0B8000004000600A0BC0000000384
-:103980000200A0C8000010000600A0CC0000000348
-:103990000200A0D8000040000600A0DC00000003E8
-:1039A0000200A0E8000100000600A22C00000004B4
-:1039B0000200A10CFF5C00000200A110FFF55FFFF8
-:1039C0000200A1140000FFFF0200A118F00003E0B4
-:1039D0000200A11C000000000200A1200000A000C5
-:1039E0000600A124000000050200A1380FE000003D
-:1039F0000600A13C000000070200A15800000800DA
-:103A00000600A15C000000030200A1680000200085
-:103A10000600A16C000000030200A17800008000F5
-:103A20000600A17C000000030200A1880002000043
-:103A30000600A23C0000000400000000000000009E
-:103A40000000003100000000000000000000000045
-:103A50000000000000000000000000000000000066
-:103A600000000000000000000000000000310032F3
-:103A70000000000000000000000000000000000046
-:103A80000000000000000000000000000000000036
-:103A9000000000000000000000320056000000009E
-:103AA0000000000000000000000000000000000016
-:103AB0000000000000000000000000000000000006
-:103AC000000000000056008C000000000000000014
-:103AD000008C009000900094009400980098009C46
-:103AE000009C00A000A000A400A400A800A800ACB6
-:103AF00000AC00B100B100B300B300B5000000009D
-:103B000000000000000000000000000000000000B5
-:103B100000000000000000000000000000B50100EF
-:103B2000010001060106010C010C01140114011C25
-:103B3000011C01240124012C012C01340134013C1D
-:103B4000013C01440144014C000000000000000061
-:103B50000000000000000000000000000000000065
-:103B60000000000000000000000000000000000055
-:103B70000000000000000000000000000000000045
-:103B80000000000000000000000000000000000035
-:103B90000000000000000000000000000000000025
-:103BA0000000000000000000000000000000000015
-:103BB0000000000000000000000000000000000005
-:103BC00000000000000000000000000000000000F5
-:103BD00000000000000000000000000000000000E5
-:103BE00000000000000000000000000000000000D5
-:103BF0000000000000000000014C01510000000026
-:103C000000000000015101520152015301530154BF
-:103C100001540155015501560156015701570158EC
-:103C200001580159000000000000000000000000E1
-:103C30000000000000000000000000000000000084
-:103C40000000000000000000000000000000000074
-:103C50000159015E015E016A016A017600000000FF
-:103C60000000000000000000000000000000000054
-:103C70000000000000000000000000000000000044
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA0000000000000000000017601770000000025
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000000000000177019A0000000000000000D1
-:103CE00000000000000000000000000000000000D4
-:103CF00000000000000000000000000000000000C4
-:103D0000019A01C200000000000000000000000055
-:103D100000000000000000000000000000000000A3
-:103D200000000000000000000000000001C201F3DC
-:103D3000000000000000000001F301FA01FA020196
-:103D4000020102080208020F020F02160216021DEB
-:103D5000021D02240224022B022B02630000000039
-:103D600000000000026302670267026B026B026FD1
-:103D7000026F0273027302770277027B027B027F7B
-:103D8000027F0283028302D102D102EB02EB030520
-:103D9000030503080308030B030B030E030E0311B3
-:103DA00003110314031403170317031A031A031D43
-:103DB000031D035E035E0362036203660366036919
-:103DC0000369036C036C036F036F03720372037563
-:103DD000037503780378037B037B037E037E037FF5
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E00000000000000000000037F0391000000009C
-:103E100000000000000000000000000000000000A2
-:103E20000000000000000000000000000000000092
-:103E300000000000039103A603A603A903A903AC95
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E600003AC03D9000000000000000000000000C7
-:103E70000000000000000000000000000000000042
-:103E800000000000000000000000000003D904DC76
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB000000000000000000004DC04E304E304E769
-:103EC00004E704EB00000000000000000000000018
-:103ED00000000000000000000000000000000000E2
-:103EE0000000000004EB052B0000000000000000B3
-:103EF000052B05340534053D053D05460546054FB2
-:103F0000054F0558055805610561056A056A057381
-:103F1000057305CB05CB05DD05DD05EF05EF05F2E6
-:103F200005F205F505F505F805F805FB05FB05FEA9
-:103F300005FE060106010604060406070607060E2E
-:103F40000000000000000000000000000000000071
-:103F50000000000000000000000000000000000061
-:103F60000000000000000000060E06140000000023
-:103F70000000000000000000000000000000000041
-:103F80000000000000000000000000000000000031
-:103F900000000000061406170000000000000000EA
-:103FA0000000000000000000000000000000000011
-:103FB0000000000000000000000000000000000001
-:103FC0000617061D000000000000000000000000B1
-:103FD00000000000000000000000000000000000E1
-:103FE00000000000000000000000000000000000D1
-:103FF0000000000000000000061D062C062C063BF9
-:10400000063B064A064A06590659066806680677B8
-:1040100006770686068606950695070600000000C8
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:1040400000000000070607190719072A072A073B7F
-:104050000000000000000000000000000000000060
-:104060000000000000000000000000000000000050
-:10407000000000000000000000010000000204C079
-:104080000003098000040E4000051300000617C05D
-:1040900000071C800008214000092600000A2AC0F1
-:1040A000000B2F80000C3440000D3900000E3DC085
-:1040B000000F42800010474000114C00001250C019
-:1040C0000013558000145A4000155F00001663C0AD
-:1040D0000017688000186D4000197200001A76C041
-:1040E000001B7B80001C8040001D8500001E89C0D5
-:1040F000001F8E8000209340000020000000400040
-:1041000000006000000080000000A0000000C0006F
-:104110000000E0000001000000012000000140005C
-:1041200000016000000180000001A0000001C0004B
-:104130000001E00000020000000220000002400038
-:1041400000026000000280000002A0000002C00027
-:104150000002E00000030000000320000003400014
-:1041600000036000000380000003A0000003C00003
-:104170000003E000000400000004200000044000F0
-:1041800000046000000480000004A0000004C000DF
-:104190000004E000000500000005200000054000CC
-:1041A00000056000000580000005A0000005C000BB
-:1041B0000005E000000600000006200000064000A8
-:1041C00000066000000680000006A0000006C00097
-:1041D0000006E00000070000000720000007400084
-:1041E00000076000000780000007A0000007C00073
-:1041F0000007E00000080000000820000008400060
-:1042000000086000000880000008A0000008C0004E
-:104210000008E0000009000000092000000940003B
-:1042200000096000000980000009A0000009C0002A
-:104230000009E000000A0000000A2000000A400017
-:10424000000A6000000A8000000AA000000AC00006
-:10425000000AE000000B0000000B2000000B4000F3
-:10426000000B6000000B8000000BA000000BC000E2
-:10427000000BE000000C0000000C2000000C4000CF
-:10428000000C6000000C8000000CA000000CC000BE
-:10429000000CE000000D0000000D2000000D4000AB
-:1042A000000D6000000D8000000DA000000DC0009A
-:1042B000000DE000000E0000000E2000000E400087
-:1042C000000E6000000E8000000EA000000EC00076
-:1042D000000EE000000F0000000F2000000F400063
-:1042E000000F6000000F8000000FA000000FC00052
-:1042F000000FE0000010000000102000001040003F
-:1043000000106000001080000010A0000010C0002D
-:104310000010E0000011000000112000001140001A
-:1043200000116000001180000011A0000011C00009
-:104330000011E000001200000012200000124000F6
-:1043400000126000001280000012A0000012C000E5
-:104350000012E000001300000013200000134000D2
-:1043600000136000001380000013A0000013C000C1
-:104370000013E000001400000014200000144000AE
-:1043800000146000001480000014A0000014C0009D
-:104390000014E0000015000000152000001540008A
-:1043A00000156000001580000015A0000015C00079
-:1043B0000015E00000160000001620000016400066
-:1043C00000166000001680000016A0000016C00055
-:1043D0000016E00000170000001720000017400042
-:1043E00000176000001780000017A0000017C00031
-:1043F0000017E0000018000000182000001840001E
-:1044000000186000001880000018A0000018C0000C
-:104410000018E000001900000019200000194000F9
-:1044200000196000001980000019A0000019C000E8
-:104430000019E000001A0000001A2000001A4000D5
-:10444000001A6000001A8000001AA000001AC000C4
-:10445000001AE000001B0000001B2000001B4000B1
-:10446000001B6000001B8000001BA000001BC000A0
-:10447000001BE000001C0000001C2000001C40008D
-:10448000001C6000001C8000001CA000001CC0007C
-:10449000001CE000001D0000001D2000001D400069
-:1044A000001D6000001D8000001DA000001DC00058
-:1044B000001DE000001E0000001E2000001E400045
-:1044C000001E6000001E8000001EA000001EC00034
-:1044D000001EE000001F0000001F2000001F400021
-:1044E000001F6000001F8000001FA000001FC00010
-:1044F000001FE000002000000020200000204000FD
-:1045000000206000002080000020A0000020C000EB
-:104510000020E000002100000021200000214000D8
-:1045200000216000002180000021A0000021C000C7
-:104530000021E000002200000022200000224000B4
-:1045400000226000002280000022A0000022C000A3
-:104550000022E00000230000002320000023400090
-:1045600000236000002380000023A0000023C0007F
-:104570000023E0000024000000242000002440006C
-:1045800000246000002480000024A0000024C0005B
-:104590000024E00000250000002520000025400048
-:1045A00000256000002580000025A0000025C00037
-:1045B0000025E00000260000002620000026400024
-:1045C00000266000002680000026A0000026C00013
-:1045D0000026E00000270000002720000027400000
-:1045E00000276000002780000027A0000027C000EF
-:1045F0000027E000002800000028200000284000DC
-:1046000000286000002880000028A0000028C000CA
-:104610000028E000002900000029200000294000B7
-:1046200000296000002980000029A0000029C000A6
-:104630000029E000002A0000002A2000002A400093
-:10464000002A6000002A8000002AA000002AC00082
-:10465000002AE000002B0000002B2000002B40006F
-:10466000002B6000002B8000002BA000002BC0005E
-:10467000002BE000002C0000002C2000002C40004B
-:10468000002C6000002C8000002CA000002CC0003A
-:10469000002CE000002D0000002D2000002D400027
-:1046A000002D6000002D8000002DA000002DC00016
-:1046B000002DE000002E0000002E2000002E400003
-:1046C000002E6000002E8000002EA000002EC000F2
-:1046D000002EE000002F0000002F2000002F4000DF
-:1046E000002F6000002F8000002FA000002FC000CE
-:1046F000002FE000003000000030200000304000BB
-:1047000000306000003080000030A0000030C000A9
-:104710000030E00000310000003120000031400096
-:1047200000316000003180000031A0000031C00085
-:104730000031E00000320000003220000032400072
-:1047400000326000003280000032A0000032C00061
-:104750000032E0000033000000332000003340004E
-:1047600000336000003380000033A0000033C0003D
-:104770000033E0000034000000342000003440002A
-:1047800000346000003480000034A0000034C00019
-:104790000034E00000350000003520000035400006
-:1047A00000356000003580000035A0000035C000F5
-:1047B0000035E000003600000036200000364000E2
-:1047C00000366000003680000036A0000036C000D1
-:1047D0000036E000003700000037200000374000BE
-:1047E00000376000003780000037A0000037C000AD
-:1047F0000037E0000038000000382000003840009A
-:1048000000386000003880000038A0000038C00088
-:104810000038E00000390000003920000039400075
-:1048200000396000003980000039A0000039C00064
-:104830000039E000003A0000003A2000003A400051
-:10484000003A6000003A8000003AA000003AC00040
-:10485000003AE000003B0000003B2000003B40002D
-:10486000003B6000003B8000003BA000003BC0001C
-:10487000003BE000003C0000003C2000003C400009
-:10488000003C6000003C8000003CA000003CC000F8
-:10489000003CE000003D0000003D2000003D4000E5
-:1048A000003D6000003D8000003DA000003DC000D4
-:1048B000003DE000003E0000003E2000003E4000C1
-:1048C000003E6000003E8000003EA000003EC000B0
-:1048D000003EE000003F0000003F2000003F40009D
-:1048E000003F6000003F8000003FA000003FC0008C
-:1048F000003FE000003FE00100000000000001FF79
-:104900000000020000007FF800007FF800000704AC
-:104910000000350000000001FFFFFFFFFFFFFFFF69
-:10492000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
-:10493000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
-:10494000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
-:10495000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
-:10496000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
-:10497000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
-:10498000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
-:10499000FFFFFFFFFFFFFFFFFFFFFFFF0000000023
-:1049A000FFFFFFFF00000000FFFFFFFFFFFFFFFF13
-:1049B00000000000FFFFFFFF00000000FFFFFFFFFF
-:1049C000FFFFFFFF00000000FFFFFFFF00000000EF
-:1049D000FFFFFFFF0000000300BEBC20FFFFFFFF42
-:1049E00000000000FFFFFFFF00000000FFFFFFFFCF
-:1049F0000000000300BEBC20FFFFFFFF000000001E
-:104A0000FFFFFFFF00000000FFFFFFFF00000003AB
-:104A100000BEBC20FFFFFFFF00000000FFFFFFFF04
-:104A200000000000FFFFFFFF0000000300BEBC20ED
-:104A3000FFFFFFFF00000000FFFFFFFF000000007E
-:104A4000FFFFFFFF0000000300BEBC20FFFFFFFFD1
-:104A500000000000FFFFFFFF00000000FFFFFFFF5E
-:104A60000000000300BEBC2000002000000040C089
-:104A700000006180000082400000A3000000C3C06D
-:104A80000000E4800001054000012600000146C04E
-:104A900000016780000188400001A9000001C9C031
-:104AA0000001EA8000020B4000022C0000024CC012
-:104AB00000026D8000028E400002AF000002CFC0F5
-:104AC0000002F0800003114000033200000352C0D6
-:104AD00000037380000394400003B5000003D5C0B9
-:104AE0000003F6800004174000043800000458C09A
-:104AF0000004798000049A400000800000010380D7
-:104B00000001870000020A8000028E00000311806D
-:104B1000000395000004188000049C0000051F801D
-:104B20000005A300000626800006AA0000072D80CD
-:104B30000007B100000834800008B80000093B807D
-:104B40000009BF00000A4280000AC600000B49802D
-:104B5000000BCD00000C5080000CD400000D5780DD
-:104B6000000DDB0000007FF800007FF800000487E4
-:104B700000001500000019000000002800100000CF
-:104B80000000000000000000FFFFFFFF40000000E9
-:104B90004000000040000000400000004000000015
-:104BA0004000000040000000400000004000000005
-:104BB00040000000400000004000000040000000F5
-:104BC00040000000400000004000000040000000E5
-:104BD00040000000400000004000000040000000D5
-:104BE00040000000400000004000000040000000C5
-:104BF00040000000400000004000000040000000B5
-:104C000040000000400000004000000000007FF86D
-:104C100000007FF8000003E000001500FFFFFFFF29
-:104C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
-:104C3000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
-:104C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
-:104C5000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
-:104C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
-:104C7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
-:104C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
-:104C9000FFFFFFFFFFFFFFFFFFFFFFFF40000000E0
-:104CA0004000000040000000400000004000000004
-:104CB00040000000400000004000000040000000F4
-:104CC00040000000400000004000000040000000E4
-:104CD00040000000400000004000000040000000D4
-:104CE00040000000400000004000000040000000C4
-:104CF00040000000400000004000000040000000B4
-:104D000040000000400000004000000040000000A3
-:104D100040000000400000004000000000001000C3
-:104D2000000020800000310000004180000052009F
-:104D30000000628000007300000083800000940087
-:104D40000000A4800000B5000000C5800000D6006F
-:104D50000000E6800000F700000107800001180055
-:104D600000012880000139000001498000015A003B
-:104D700000016A8000017B0000018B8000019C0023
-:104D80000001AC800001BD000001CD800001DE000B
-:104D90000001EE800001FF0000007FF800007FF8B6
-:104DA0000000023E0000350010000000000028ADA9
-:104DB000000000000001000100350804CCCCCCC587
-:104DC000FFFFFFFFFFFFFFFF7058103C00000000D7
-:104DD000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3D
-:104DE000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2D
-:104DF000CCCC0201CCCCCCCCCCCC0201CCCCCCCC1D
-:104E0000CCCC0201CCCCCCCCCCCC0201CCCCCCCC0C
-:104E100000000000FFFFFFFF400000004000000016
-:104E20004000000040000000400000004000000082
-:104E30004000000040000000400000004000000072
-:104E40004000000040000000400000004000000062
-:104E50004000000040000000400000004000000052
-:104E60004000000040000000400000004000000042
-:104E70004000000040000000400000004000000032
-:104E80004000000040000000400000004000000022
-:104E90004000000040000000000E0232011600D663
-:104EA000001000000000000000720236012300F331
-:104EB00000100000000000000000FFFF00000000E4
-:104EC0000000FFFF000000000000FFFF00000000E6
-:104ED0000000FFFF000000000000FFFF00000000D6
-:104EE0000000FFFF000000000000FFFF00000000C6
-:104EF0000000FFFF000000000000FFFF00000000B6
-:104F00000000FFFF000000000000FFFF00000000A5
-:104F10000000FFFF000000000000FFFF0000000095
-:104F20000000FFFF000000000000FFFF0000000085
-:104F30000000FFFF000000000000FFFF0000000075
-:104F40000000FFFF000000000000FFFF0000000065
-:104F50000000FFFF000000000000FFFF0000000055
-:104F60000000FFFF000000000000FFFF0000000045
-:104F70000000FFFF000000000000FFFF0000000035
-:104F80000000FFFF000000000000FFFF0000000025
-:104F90000000FFFF000000000000FFFF0000000015
-:104FA0000000FFFF000000000000FFFF0000000005
-:104FB0000000FFFF000000000000FFFF00000000F5
-:104FC0000000FFFF000000000000FFFF00000000E5
-:104FD0000000FFFF000000000000FFFF00000000D5
-:104FE0000000FFFF000000000000FFFF00000000C5
-:104FF0000000FFFF000000000000FFFF00000000B5
-:105000000000FFFF000000000000FFFF00000000A4
-:105010000000FFFF000000000000FFFF0000000094
-:105020000000FFFF000000000000FFFF0000000084
-:105030000000FFFF000000000000FFFF0000000074
-:105040000000FFFF000000000000FFFF0000000064
-:105050000000FFFF000000000000FFFF0000000054
-:105060000000FFFF000000000000FFFF0000000044
-:105070000000FFFF000000000000FFFF0000000034
-:105080000000FFFF000000000000FFFF0000000024
-:105090000000FFFF000000000000FFFF0000000014
-:1050A0000000FFFF000000000000FFFF0000000004
-:1050B0000000FFFF00000000FFFFFFF3320FFFFFC3
-:1050C0000C30C30CC30C30C3CF3CF300F3CF3CF324
-:1050D0000000CF3CCDCDCDCDFFFFFFF130EFFFFF86
-:1050E0000C30C30CC30C30C3CF3CF300F3CF3CF304
-:1050F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFF0
-:105100000C30C30CC30C30C3CF3CF300F3CF3CF3E3
-:105110000002CF3CCDCDCDCDFFFFF4061CBFFFFF7D
-:105120000C30C305C30C30C3CF300014F3CF3CF3B5
-:105130000004CF3CCDCDCDCDFFFFFFF2304FFFFFC0
-:105140000C30C30CC30C30C3CF3CF300F3CF3CF3A3
-:105150000008CF3CCDCDCDCDFFFFFFFA302FFFFFB4
-:105160000C30C30CC30C30C3CF3CF300F3CF3CF383
-:105170000010CF3CCDCDCDCDFFFFFFF731EFFFFFCE
-:105180000C30C30CC30C30C3CF3CF300F3CF3CF363
-:105190000020CF3CCDCDCDCDFFFFFFF5302FFFFF61
-:1051A0000C30C30CC30C30C3CF3CF300F3CF3CF343
-:1051B0000040CF3CCDCDCDCDFFFFFFF3310FFFFF42
-:1051C0000C30C30CC30C30C3CF3CF300F3CF3CF323
-:1051D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF64
-:1051E0000C30C30CC30C30C3CF3CF300F3CF3CF303
-:1051F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEF
-:105200000C30C30CC30C30C3CF3CF300F3CF3CF3E2
-:105210000002CF3CCDCDCDCDFFFFF4061CBFFFFF7C
-:105220000C30C305C30C30C3CF300014F3CF3CF3B4
-:105230000004CF3CCDCDCDCDFFFFFFF2304FFFFFBF
-:105240000C30C30CC30C30C3CF3CF300F3CF3CF3A2
-:105250000008CF3CCDCDCDCDFFFFFFFA302FFFFFB3
-:105260000C30C30CC30C30C3CF3CF300F3CF3CF382
-:105270000010CF3CCDCDCDCDFFFFFFF730EFFFFFCE
-:105280000C30C30CC30C30C3CF3CF300F3CF3CF362
-:105290000020CF3CCDCDCDCDFFFFFFF5304FFFFF40
-:1052A0000C30C30CC30C30C3CF3CF300F3CF3CF342
-:1052B0000040CF3CCDCDCDCDFFFFFFF331EFFFFF61
-:1052C0000C30C30CC30C30C3CF3CF300F3CF3CF322
-:1052D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF63
-:1052E0000C30C30CC30C30C3CF3CF300F3CF3CF302
-:1052F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEE
-:105300000C30C30CC30C30C3CF3CF300F3CF3CF3E1
-:105310000002CF3CCDCDCDCDFFFFF4061CBFFFFF7B
-:105320000C30C305C30C30C3CF300014F3CF3CF3B3
-:105330000004CF3CCDCDCDCDFFFFFFF2304FFFFFBE
-:105340000C30C30CC30C30C3CF3CF300F3CF3CF3A1
-:105350000008CF3CCDCDCDCDFFFFFFFA302FFFFFB2
-:105360000C30C30CC30C30C3CF3CF300F3CF3CF381
-:105370000010CF3CCDCDCDCDFFFFFF97056FFFFFD8
-:105380000C30C30CC30C30C3CF3CC000F3CF3CF394
-:105390000020CF3CCDCDCDCDFFFFFFF5310FFFFF7E
-:1053A0000C30C30CC30C30C3CF3CF300F3CF3CF341
-:1053B0000040CF3CCDCDCDCDFFFFFFF3320FFFFF3F
-:1053C0000C30C30CC30C30C3CF3CF300F3CF3CF321
-:1053D0000000CF3CCDCDCDCDFFFFFFF1310FFFFF62
-:1053E0000C30C30CC30C30C3CF3CF300F3CF3CF301
-:1053F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFED
-:105400000C30C30CC30C30C3CF3CF300F3CF3CF3E0
-:105410000002CF3CCDCDCDCDFFFFF4061CBFFFFF7A
-:105420000C30C305C30C30C3CF300014F3CF3CF3B2
-:105430000004CF3CCDCDCDCDFFFFFFF2304FFFFFBD
-:105440000C30C30CC30C30C3CF3CF300F3CF3CF3A0
-:105450000008CF3CCDCDCDCDFFFFFF8A042FFFFF4D
-:105460000C30C30CC30C30C3CF3CC000F3CF3CF3B3
-:105470000010CF3CCDCDCDCDFFFFFF9705CFFFFF77
-:105480000C30C30CC30C30C3CF3CC000F3CF3CF393
-:105490000020CF3CCDCDCDCDFFFFFFF5310FFFFF7D
-:1054A0000C30C30CC30C30C3CF3CF300F3CF3CF340
-:1054B0000040CF3CCDCDCDCDFFFFFFF3316FFFFFDF
-:1054C0000C30C30CC30C30C3CF3CF300F3CF3CF320
-:1054D0000000CF3CCDCDCDCDFFFFFFF1302FFFFF42
-:1054E0000C30C30CC30C30C3CF3CF300F3CF3CF300
-:1054F0000001CF3CCDCDCDCDFFFFFFF6305FFFFFEC
-:105500000C30C30CC30C30C3CF3CF300F3CF3CF3DF
-:105510000002CF3CCDCDCDCDFFFFFFF630BFFFFF6A
-:105520000C30C30CC30C30C3CF3CF314F3CF3CF3AB
-:105530000004CF3CCDCDCDCDFFFFFFF2304FFFFFBC
-:105540000C30C30CC30C30C3CF3CF300F3CF3CF39F
-:105550000008CF3CCDCDCDCDFFFFFFFA302FFFFFB0
-:105560000C30C30CC30C30C3CF3CF300F3CF3CF37F
-:105570000010CF3CCDCDCDCDFFFFFFF731CFFFFFEA
-:105580000C30C30CC30C30C3CF3CF300F3CF3CF35F
-:105590000020CF3CCDCDCDCDFFFFFFF0307FFFFF12
-:1055A0000C30C30CC30C30C3CF3CF300F3CF3CF33F
-:1055B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF73
-:1055C0000C30C30CC30C30C3CF3CF3CCF3CF3CF353
-:1055D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF93
-:1055E0000C30C30CC30C30C3CF3CF3CCF3CF3CF333
-:1055F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF72
-:105600000C30C30CC30C30C3CF3CF3CCF3CF3CF312
-:105610000002CF3CCDCDCDCDFFFFFFFF30CFFFFF50
-:105620000C30C30CC30C30C3CF3CF3CCF3CF3CF3F2
-:105630000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2E
-:105640000C30C30CC30C30C3CF3CF3CCF3CF3CF3D2
-:105650000008CF3CCDCDCDCDFFFFFFFF30CFFFFF0A
-:105660000C30C30CC30C30C3CF3CF3CCF3CF3CF3B2
-:105670000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
-:105680000C30C30CC30C30C3CF3CF3CCF3CF3CF392
-:105690000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB2
-:1056A0000C30C30CC30C30C3CF3CF3CCF3CF3CF372
-:1056B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF72
-:1056C0000C30C30CC30C30C3CF3CF3CCF3CF3CF352
-:1056D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF92
-:1056E0000C30C30CC30C30C3CF3CF3CCF3CF3CF332
-:1056F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF71
-:105700000C30C30CC30C30C3CF3CF3CCF3CF3CF311
-:105710000002CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
-:105720000C30C30CC30C30C3CF3CF3CCF3CF3CF3F1
-:105730000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2D
-:105740000C30C30CC30C30C3CF3CF3CCF3CF3CF3D1
-:105750000008CF3CCDCDCDCDFFFFFFFF30CFFFFF09
-:105760000C30C30CC30C30C3CF3CF3CCF3CF3CF3B1
-:105770000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE1
-:105780000C30C30CC30C30C3CF3CF3CCF3CF3CF391
-:105790000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB1
-:1057A0000C30C30CC30C30C3CF3CF3CCF3CF3CF371
-:1057B0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF71
-:1057C0000C30C30CC30C30C3CF3CF3CCF3CF3CF351
-:1057D0000000CF3CCDCDCDCDFFFFFFFF30CFFFFF91
-:1057E0000C30C30CC30C30C3CF3CF3CCF3CF3CF331
-:1057F0000001CF3CCDCDCDCDFFFFFFFF30CFFFFF70
-:105800000C30C30CC30C30C3CF3CF3CCF3CF3CF310
-:105810000002CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
-:105820000C30C30CC30C30C3CF3CF3CCF3CF3CF3F0
-:105830000004CF3CCDCDCDCDFFFFFFFF30CFFFFF2C
-:105840000C30C30CC30C30C3CF3CF3CCF3CF3CF3D0
-:105850000008CF3CCDCDCDCDFFFFFFFF30CFFFFF08
-:105860000C30C30CC30C30C3CF3CF3CCF3CF3CF3B0
-:105870000010CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
-:105880000C30C30CC30C30C3CF3CF3CCF3CF3CF390
-:105890000020CF3CCDCDCDCDFFFFFFFF30CFFFFFB0
-:1058A0000C30C30CC30C30C3CF3CF3CCF3CF3CF370
-:1058B0000040CF3CCDCDCDCD001000000007010051
-:1058C00000028170000B81980002025000010270FA
-:1058D000000F028000010370000800000008008033
-:1058E00000028100000B8128000201E0000102009B
-:1058F0000007021000020280000F0000000800F004
-:1059000000028170000B81980002025000010270B9
-:10591000000B82800008033800100000000801001E
-:1059200000028180000B81A80002026000018280D9
-:10593000000E829800080380000B0000000100B0F8
-:10594000000280C0000580E8000201400001016003
-:10595000000E017000038250CCCCCCCCCCCCCCCC93
-:10596000CCCCCCCCCCCCCCCC00002000CCCCCCCC87
-:10597000CCCCCCCCCCCCCCCCCCCCCCCC0000200077
-:10598000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC57
-:1059900004002000000000001F8B08000000000031
-:1059A00000FFFB51CFC0F0038A277033309CE345E2
-:1059B000F0E981831829D35FC6CEC05001C4554099
-:1059C000BC0B883FB132307C66255EFF352904DB95
-:1059D000488281211E88D7883130A84922C41DA45D
-:1059E00019182603F9A150B147403A5F8A32770F60
-:1059F000169CA68029E62A8760A7639147C6196886
-:105A0000F24BE550F99904F40F34BEA28ECAFFA2FE
-:105A10000AA113A0E257D1E4BF42E53BA0FEBAA61B
-:105A20008EDDDC4E32FD5DC302A101FC99B04798CA
-:105A300003000000000000001F8B080000000000B1
-:105A400000FFED7D0B7854D5B5F03E731E3393798E
-:105A5000E424E43181104E1E2068080384888AB74C
-:105A6000271030F6D27678D5582D0EAF10F2866B0F
-:105A70002DBDB67F06084978A8C11F11ADD5E12913
-:105A8000F6821D3122B6880328D2ABBD37587C552B
-:105A9000EB1FD10B8A90442A6AEFB5E5EEB5F63ECE
-:105AA000C99C9309047BDBAFFFFFFD7C9FEEECC735
-:105AB000D97BEDF5DA6BADFD18C93181A40D23E476
-:105AC00022FCFB0621929D1032A1379DE32021D7B5
-:105AD000184292662FFDDD921442DCBAE2BF49A360
-:105AE000A9BBFEE41A9A5F5FECF0AFA44D5B1F4DBB
-:105AF000786A092DBFEFA12FC34FD07CFAEC79ADA6
-:105B0000C5B47ECE24C90F5D1D1AAB1002EDE7D8D7
-:105B1000C276015281E5979030A17F92AFE8F845B7
-:105B200084B8E89F2497FE37891CB2A5603EE4D173
-:105B3000A09E029946483631FE55607E36FC09F536
-:105B4000447767D0EF759E77E513EC7F8E5F0ADBB5
-:105B5000E94773F20372C84DD3C6086D49C71DFBF0
-:105B60005D3908F9C00C99E46387B6D8FE6FCA0F97
-:105B70004C7514D2FE670B08FFF9D94936DA82CC8E
-:105B8000A6EDE13B224E1F1ACC679FD9E8B8DFE0B3
-:105B9000DFDDDF40FFA7C05F4B09A1E5CB1C0C9EFA
-:105BA000E4D9D9C530CE8919D71643BF73A61332AD
-:105BB00088564D9D3DF69044F3EB1A89DF4EDBCDC0
-:105BC000290D1CCF81D9F8CBA79302E8978EEE6000
-:105BD0007D5FC4FFEB38EF643EDE3FCC1E2B10FA36
-:105BE00041F6978AA95D72A0F953D14B486A052DF9
-:105BF0001F1953EE9F769AD0F2E4E9E6F64013724D
-:105C00001D2125C49372EA1AFA7716C9BA2842AD43
-:105C10006A0B8CEEE50F6B4AFFFDF922D001FA12F8
-:105C2000FBD61F6A9CE9E9A0F85A377B9687D0F427
-:105C3000F5C02C0FE0EFF5D9B3108FD6F673666779
-:105C400027025EFB1BEFFE063AD008FA3DC7B3B54C
-:105C50007E9048EA23F4FB393AD1C331FDDF01934A
-:105C60004D256409301B4DB325D5A6D2FA6C8DE8BD
-:105C70009138E39502B1693B92499928E352F30FB9
-:105C800061BB3726D94AC371E67307EFC7551AB807
-:105C9000670EA56FD674127551BA1229AAC6E2759D
-:105CA0005D8A541A8E03C7DD1C5E42687BCFC0E15B
-:105CB0007165D802D09F32470CC4C2F50380674299
-:105CC0006F4AA24CEEE6F818FD72BFFB6C508F33A2
-:105CD0008FBB008E0990AAEC3B0E8F0C7C9301B217
-:105CE0009682FC43C26324E0FBCC1EB9240107E585
-:105CF0008FA1F01715AE2DA47BD41214B256EC4729
-:105D0000F4A42403BD5711DE0F29514F517E1542D3
-:105D1000AB848BD75C6A9E123965F035F0A93B19CC
-:105D2000C7BF1C5E48A018E55231D48878C007E38D
-:105D30002BF94DED02A5CBBAD1E57E946F8A219067
-:105D400033437EE1DF57F43B37FFCCBD9CD291CA91
-:105D5000916B39D38F8ADF2C67EB928EB50820C800
-:105D600064B9490F1012244077036FEBBEA278BCD0
-:105D700004BF5BFBDD6FC8E7603298C927933F051E
-:105D8000FA07BD79D37E07F0F53ADF5E07CC6B5D8D
-:105D9000FE5E827A8AD3C7E8D795AF5D52CED681B0
-:105DA0007C8D80EEC348A79EF2D1A7C6027E76A660
-:105DB0002AF78B747E3B9308EAD9756B48782BD011
-:105DC000B594E5B56F69E1B5748E3B9DBCBE98D6C0
-:105DD000D3BC06EDA9BEDB3A490B87687E6B8B8D81
-:105DE000B51FAB85459A1F319184148A4F6DC5C28A
-:105DF000954E5ABE75A3EA17B55EFD34A225672DF0
-:105E0000B4DFB2DEA60AF0BD8FAD233BF3493844C0
-:105E1000C7DFB139F99B23693E14B2F987D34FF23A
-:105E2000F8FA45D9A5442802B4313A9C21795CAEF0
-:105E30000402E5A9BC7CCB7EFFBF8EA4F03D365D9D
-:105E4000F2AFA0453BD6CF4CD0289E766881043F68
-:105E50004D7FF0C07CCCEFCC0C2600DD766E9C9F95
-:105E6000004CF1C0E6991B46417B61D2611DE96C93
-:105E7000D6FF471F283AEC00384B999E4F6A0D7E9B
-:105E800053A2F9BC4912B9894E21CFAD21DCDB1FE9
-:105E9000B211584FFBE86D8BBE4ED4CD7957EBB4A1
-:105EA0008F817F5D0F160920DA3B3586E7413792F7
-:105EB000F08AECBEE3EF5CC8EA13295D800E2EBFCA
-:105EC000625967965AF856477970713CB95A751CF1
-:105ED0008F487A8990D68B57FA9F4662F0E97AF01C
-:105EE0002881F5E98AE76381275DA07C0F83AB9C5D
-:105EF000EFB91E1CF7CA5763E3F1B121EF1EA07F73
-:105F000022C577612404EB507A61240AFCE2C95768
-:105F100034B00B9A0931C9C5A1D1FB7C1D203713C0
-:105F2000223E58AFD78D7E83C98F5681F830E66FF9
-:105F3000B4F7E4B79358FBC1A88772F8CE537869D9
-:105F400039BB87CB594F7F84AD4724731CC2754F33
-:105F5000E161755E1C7D4CC80A94CB9749E07A815B
-:105F6000A6DECDED51A7066CAEDF0079B7400291F9
-:105F700038DF4D13D87AD242745DA0E9A3442F16BE
-:105F8000709D4B66FAD7B22EF5D19FBC5D16E9160F
-:105F900040DF68D43E803487F831CD23014C4792EE
-:105FA000564CAF26114CF3493BA605A41B5343AFF7
-:105FB000F8892A427EC4C4FAC920E7A4DA638BE5D3
-:105FC000BBD06432B23ECE3C9A2D787390F8EBF899
-:105FD0001D025FE748A68AFC43F87AF16EB018E824
-:105FE000C55428FCBBDBCCEFE224BE0E38EA3D6989
-:105FF000805733DD8D5454CD7C5A6DF0A944241C58
-:10600000C7321FC463CCB8D6FE5673FBC6989F9C9C
-:10601000A2231F496E66CF5038F4BD71F0D1280815
-:106020007C9E41ABDC3AB229BF4B49B6C85A9A6B49
-:10603000744F76E8382F3F894767EB7CACF02ABE77
-:1060400081C1B3A9079E0ACB3AFA97C2F34FA6FEC5
-:10605000A44CB21DD60BA28670DE56BCF6F9DE4209
-:106060008FFEE4D29169D6574A8AD70287859F0668
-:10607000687F7CE34BEA7FE4C3FA1B21412AECA949
-:10608000F90101E67FAD401A13295EC868A2EDA0B0
-:1060900070CDF56ACC8E8B693719F491660BC97493
-:1060A000BECF92EE23D03EE427911DF4B367F36D8B
-:1060B000A55B697DAA9FB663FD05401EAE1D6D0BF5
-:1060C00040B9D19F4E9E32F547FD2E11F0E136E8E2
-:1060D00063F1C3E4B136B41F957CA26F89235FC717
-:1060E000B97C151D71EAB09EB8CA94B0331BFA8F03
-:1060F00014433EB59AF8615D9FD4CDE651C6E130B8
-:10610000E69DFA5940007E6AF7313BC05548D03FC2
-:106110005432DA74F01FDDB40EF5427E541753503A
-:106120003FA23FD81F9E3D5F3DED0BD07E7DD4B991
-:106130006A07BE92FCE9A09F578F56C860FABDF867
-:106140003B3BF6FFB9A762188999CF470DD1B10B38
-:10615000A9C170A6E118A6671BDA31ED6C780BD3E4
-:10616000FEE94A598EDACEEB7EE2D7C01E100F3F11
-:1061700047340FC01DD5755C171CA212B32E808248
-:1061800006FF6FD3D8BCF0DA6CC46B08E64DD56758
-:10619000787836E05B0A009E873822C2D27C867708
-:1061A000C03FD001CA8B8E3CB702F15C4DC6029E47
-:1061B00037C9A40CF43CE013D6897D82ED0E800330
-:1061C000F2F369FEFA8FFAC1FB5986F78C97299E84
-:1061D000004E494B64C6AD8EF2953B910B12D7270A
-:1061E000BD7A92F9D9BDF6BDF6EF00CF964689ACDF
-:1061F00085BCA6684A11B7F7414A8215D3C1DFDCD6
-:10620000563EFD28D80BB9E25787645A3EB45E3A31
-:10621000D911234F596574FDA476C2B0E5E6F2ECBE
-:1062200090394F07407F34B7C55C3EC4C6F5AE8792
-:1062300078401EADF35AB6E85771FDD3550D24EAE8
-:106240009663F202C3A79117BC133B42747ECB4600
-:10625000118C034CB7B1F5B315BEA37C712F4FD78A
-:106260005BFA315269A2DB46C6303D196F7DBADD5B
-:10627000563CCE46FB6BB04D1E67A372E4922204DF
-:10628000EC77975BD1E3F993D36D128E9F20B5EB3A
-:106290002285ABFB3AE2DF4AF1BE4CEE8E827C2CCB
-:1062A0002BD6FC215047FE30CA6312D56162F61529
-:1062B000C153027050784A6C384E04FBE9A6380787
-:1062C000FB7D99CCFA5D364A236837F603E75536ED
-:1062D00019E10CD80409FD344E97551539F74DA333
-:1062E000D94E559F05FD67260567C17846B96F7E73
-:1062F00029FA6319C3CCF42B77D467017F540622A3
-:10630000D3807F4E7B5F6C92E9BCB73610BF44F1FF
-:10631000FF9E2B701BF457737BFD08B07FDF065E7A
-:1063200098002A3B807AACA564A55FA2E572891427
-:1063300095293FCA130FBF2517401A2A86388B9319
-:10634000D4337D47F54B2235BD1C23F58F217EA22A
-:10635000803CD072556F25600F38A8DB703286EF15
-:10636000944C731E6CFAD87C7F7AE3722998E727E5
-:106370008703FE09DAE9DD49CC7F9226FA0B00DEBD
-:106380007BAFFFA606F0FCC46633F967567F4D5A13
-:10639000FE6F69791068E2FEB6B4FCD5B4BCF1803A
-:1063A00097569C9763CA32940B05F02432F907BFC5
-:1063B000BE671DE478F85BCFDB582F5737BC35F844
-:1063C000C3E120A71D833FA4C4592D0591FF423E80
-:1063D000F0B5281C92998F09784F1362526E1718E6
-:1063E000F69B9C5A887494DCD2A98E98F5DDC08FF8
-:1063F000B2FCDDC11F8E87F46D4CAD7855A4200131
-:106400003FD068D713B718E0FAEF34E2A979C41F78
-:10641000A53873A4B0786A7A5E280AF37252FD092F
-:10642000EBD33D235F6BC5F081C50F3B94AD203F9F
-:10643000B48CB6615CB36578E49002F90C6A40D123
-:106440007A67CA5D21886D4CCD637CE3F4B3F5D4E3
-:10645000353C8C7E98A1BFBD1C1F5EAD1CF5B3679B
-:10646000A2D9DE31D601272BA2F436DB51CE94A679
-:106470004FC582BE7E9A539B761AE569A4B93F2325
-:10648000DED16EE3F18B6BC9B5683759E212FDE1DD
-:10649000CD6BF87113D9BCDCD34918FCE6F48951F3
-:1064A000C49BD7CFF066D89B1E3EBF9B4A2304FCFB
-:1064B000BE9EF8F3CD0C6FEBAF8BA27FB77EEC29BD
-:1064C000B467BD851D263FCEF81ECAA1FEFCC4766A
-:1064D000A8A1F618CB1B71238AA7E91969BDEB6146
-:1064E0002BB7DBAD7453279262D0634747A7158360
-:1064F000DEBEB784C24EAB3C7A589762F0ADF27EF6
-:10650000D47C86DF7BCBD87C697BF4D3EF9D9893DA
-:1065100004E366F2F8B0117FEEF1CBEBCD784F28B3
-:10652000B4C4852D7EB7EA67F4524BCCE5AB395F36
-:106530002B22A7572A19CEE835303E4F32F8BC84BB
-:10654000F17932DF37482FD10E011D924A99FF4D64
-:106550002C7EF34D291D8C5E378FC8003FFCFEA9B1
-:10656000DD3E669730BA26717EBCEFC61102C87157
-:10657000728926407D723EC35332C513AC77C9A5DC
-:10658000CCEFF64ED4B05D5209A35B0B7C4CE15FBF
-:1065900003748A891F3B4B5B75A07F6BF14E1D74A2
-:1065A0005932C5E1200ACFD4520A1BD89DB45F806E
-:1065B000D75318C5B85A524970D8A5FC7A42A2825E
-:1065C000CD87F8106C684BE93C25587E6862B22094
-:1065D000D07EEFA77CC0F180713C178FA3DF5F787E
-:1065E00012F5DCFDF04D36C8A9F6EB1C9A27A5364E
-:1065F0003FF807F797E608F1E2E7C6BCFB83CB2A32
-:10660000C712F83531FC7295C8E3DE16FE5D4722ED
-:106610006A2EC857486FF7A5F5EA0F83FF7AE4653D
-:1066200012E3CBFEF489A187DD2418B265F7D51FEC
-:1066300092CEF8DE9E174079EB03EF24C6AF528A64
-:10664000B9FC3691DB7F865ED19207142727A10023
-:10665000AE7722D74F4FDA020BC554F0BBC3B84E0A
-:10666000B8C874AE37199FCA9CFFA6E633BDE24A8C
-:1066700089B076978DA73A90DFD634A8A81F5AC65E
-:10668000DED59E43F1B06678931FBE738C6B19B94B
-:106690008DF6DB3C7C79702B0CC0FD30D4BF22AC76
-:1066A000838C5F8D7D30030E9219D2619FCC097E61
-:1066B00011E06724DB5F902412B58FEB1DDF954757
-:1066C000E1CD6769289FC10DFEC9EBB6E02A9C6F3A
-:1066D0007E6B94A29BCE9BC9CB6A21425C22CCEB01
-:1066E000727C1EB231BE8E9FF6F75D02ECD3C4E120
-:1066F000DFDD22DBA7592D478850087E1BED89F28C
-:10670000C9EA6C6A97C781A391F36BD52E67F8C36A
-:10671000187EAB892499F275FB33C21FC6FA117734
-:106720000AB84F51CDD158433AB200CFEF291AF6EB
-:10673000576BEB48837C17E94E5B027810038F8B15
-:1067400074FD7752BEC4B8907B60EBD6E5F0A781AC
-:106750000CD18540CBE4A90F79988E17DC07E3694B
-:106760002A2BBFD271E3F0F50BB17C4DC457596AA7
-:10677000E56B7F14F9DA9D12C57AB79FF1B5C18F29
-:10678000899C1FAD7C688CBF9EC7AFD6723E5F33BD
-:10679000A1498570DFDA519B309EE62CDA5C017CE2
-:1067A000DE32AA250C7CDE64F035DF17A1FE2EDB7D
-:1067B0001FD35AA3B04E2672BE56D4EE06907BEB82
-:1067C0007C5D9338BC3405BE06B8395FBF07F893CB
-:1067D000FDDD08AEC1D76B07CCD7BA456F9BD3FEA2
-:1067E000FC27D9C2D71E89F1E767C0D7004F0AB38B
-:1067F00063DC3E96CA7EEADFC7E9E70689F9996B52
-:10680000B91CACE572B0B61F39F83F22F303FE9A0B
-:1068100072308BC98143A2E58993AE8C1F25B0D31A
-:10682000E3C87B9E24FCB5E1DE3443BC723CFE270A
-:1068300030CD84BEF434D2CF44E7C0E43B8FC9737B
-:106840007F72BE76687C38FE5364F4A7F82E9226D9
-:106850005C39BEFF5A7015727E36F04382C528B788
-:10686000317A663AC02BA9869E7904D3A979AD28DE
-:10687000A786BE81580AFA2B6A2BC63B9C99AD6845
-:106880009F39F398BE31FC24EB7C8DB87813D73355
-:1068900049792102EB9F3D85703FAA9EF95199CC21
-:1068A0001F30E2D586FDA8187ED4D0BB709FA77993
-:1068B000783DDA97CD37D63BE2EDC336FBEE77F085
-:1068C0004D5FD33EEB1A5A0EFDAEC9BB9FC4B3C396
-:1068D0008C7918FB464E3E6E731EB5A8605CDF32A5
-:1068E000FCDE6AC73467B2FE7ABEE77A57EED1BBE8
-:1068F0002C8F76546E8C9F6FE9C7E00385E843A325
-:10690000103718E41E09E74C9A84043FD8C74D920B
-:10691000209D72901E7BA95A891640FF2766BC9C59
-:1069200085F6B23DB806E4BCE9AB8003E2A9AB53FF
-:106930005EF3C6969F9DF1E6B7C16CA5DFD5E27EFA
-:106940008E8348B1FB6327DCDBD17E4BC837C7E9B8
-:106950009C14AE0902C413CCE50A8FBF2899E672D5
-:1069600099C75FA4144B39E70FB934BE5E7993EB36
-:1069700015DF02764EE7C41C16D73B712B4F6730EC
-:10698000FE3EC7DB75F334C2F5EE5F531F25E5F617
-:10699000C2EF9BE2C7F822996547BB3E2B859D2B32
-:1069A00020B1E726E05F6BA24462FCCCA18197FF97
-:1069B00008F1D4610BBECA063C6B15EA615846DB90
-:1069C000A56C9CC76342F72818CFE63A8BFBF5020B
-:1069D00045E3726A120BF4DBDB2185EFBDC0523A4E
-:1069E0008F7B0591BFECC03722D0298CA98B44B195
-:1069F000DE433A309F081BE6B9E08751BF4BC433F2
-:106A00004C611BC68D7ECCF643D688786E83A80376
-:106A1000B4BFC9ED2AF89742887EE71AF877BE40DE
-:106A20006B31C8C4E0B208C693ADED7C53D839A031
-:106A30003E7AFBAF4FDF375273818F542C37E81CFF
-:106A400014F54E6942DFF25F8981F312C6AB58DC60
-:106A5000CD5A5F2AE91740DEACE5C20B7F3A057ECE
-:106A6000F4AA6764F4A3A73C2347BF41F3355B0452
-:106A7000F4536D079DE80F773EC2F2518FA243FB9E
-:106A800073DB058C07D5D9DBEFBD01E28ACF880423
-:106A9000FD8D7019EE8B9DE27326FB59BE9C07801D
-:106AA0006AB61C9A0BDF57ECB713D877A8796EF14A
-:106AB000B76FA0F9C5C764F4516A76AC50607F65C2
-:106AC00049588840BE6B32C1F143FBC4F00EDABEB8
-:106AD000CBDB9E36C70DFB2B0EA25D45E1F6B4A7BE
-:106AE000CDA6F4A90C3F350DBEABDC2DF8C1FF9847
-:106AF000F2CC8EA319F4BB9A27043CA750B5CB4522
-:106B0000B418BA9C6A13A3DF80F8339D27F8C58BAD
-:106B100049EB34C07BCD8E0D8A1613B73CD330922F
-:106B200068F6DE7CCD13741CFA5DED93821FA658C7
-:106B30006B2341E08FCEE79C65DBDC30BF15CA08D4
-:106B40000FCCAB5981768BC3F3F6C17E7A65788B17
-:106B5000328DD6573EB245298FE1A7AA5DD7102DB9
-:106B6000863F4E6DCE4DBFD47A7B86AE5BB1F0547E
-:106B700012A6B788145666C4EC7B76C8499C3F457C
-:106B800053FF06DF875E2718C70A3DEF41BC1A7422
-:106B90005BA632BD60D0EDBCCAE9287517CD88B3BD
-:106BA000AF7A2FD0C10EF12A15D3FB1B7C986E6CE7
-:106BB000D0903E9B007F57E1BE06967B279162886E
-:106BC0008B7875A2C2529F3C5D2F96214E1260F9C0
-:106BD000B4DB83827689F91BE92639380F825CB7EA
-:106BE000C94F4C96E8BABE49092E257E3ABEB47705
-:106BF00072C97560A705E7C8A9B09F1DAC60F1E830
-:106C0000880FE4A289EFCB7C4B66F2D694A1607C1E
-:106C100064D3F78BB6A1ED41185E367DBF7C27ECBF
-:106C2000ABD17EE6CA54AE1A65DA4FEEE5FB499B5E
-:106C30003BD1D44FDADC0AA39FC5D88F7360FD6CBB
-:106C40009A7BBD199EB995463FF5D88F6760F34A88
-:106C5000BB6392199E3BAAB19FF4DBFD681F8806B7
-:106C6000FF9076DC1775EF4E1AB796C4F2D1E41F89
-:106C7000C3781E2A55B17C943831C1244F497AB269
-:106C8000293FA874B0A97D6A20C7549F5E76B58558
-:106C90002FDDA8BF314F818A26B138AB325841BDB4
-:106CA000533CD881F9BB06BB51EFDC757DF02AB0AF
-:106CB000F70056D0F37729C1316A1CBEA1F3120840
-:106CC000C6CF341BA47DEC32BEEF3979C85723DE22
-:106CD000A7DFD7D9BA4724D1FC434AF12330EFAD1F
-:106CE00032B3E38D3843829DA0FE6BCE2EDA168A36
-:106CF000C16BCB50CA2F426FBF2D72D007FCB87347
-:106D0000F56F574A14BEA6A10A1E6E7A5CFEEDE12D
-:106D100010B5999B8796FB00FF7685EA8FD8F11511
-:106D20003A7E3E8EBF1BC6DF2B333BD93ABE3D6752
-:106D3000A2697C475685697C8742C7A7F2B16FF587
-:106D40003B7C7C8ABFEB0979567E07C7B76755E065
-:106D5000F8CD0AA9308D9FD033FE01909FC3FDCDA1
-:106D60003FE77AF3FCB32ACDF357D8FC8FAEFE8011
-:106D70008F9F80F37F59FE80CD3FAB92CDDFCEFA5F
-:106D8000ED19DFDB83FF5761FEAFF537FFDC49E626
-:106D9000F90FAB36CFDFCEC67F63F5277C7C378E0D
-:106DA000FFA6FC099BFFB06A1C5FB107FDC047CA84
-:106DB00090847AF09FA961A461405DA3E3403A9278
-:106DC000C5A937C83908C75D098CEF3E4FA0FCE65E
-:106DD000EED5A7244C2590EACB5ACED355BB8B15C4
-:106DE000E62F84D05F58C4415DB85FC4F58C6CB4A5
-:106DF000878753783BF78B21C82FDC78239E5BACC9
-:106E0000B313DC77A75630FA1FFFF1C0E8ADB1F33A
-:106E1000B2A68B5A65CBFE1383C738EF5424ABA6BA
-:106E2000FC2988A7503D7C12FC1F9A9E96E978B4F5
-:106E3000FC43F083AE8A951B762E8C7677229FCE0C
-:106E4000EBBB1CFE5312C3F7A93B05DC47F87CC320
-:106E50005205F4D9A25697C96FA8E374EA7ECE8E84
-:106E6000FB8DC679BE5B501409F9FDC16F1D05BBD2
-:106E700071F1E641A6EF6E27E1D5701473C1FA797E
-:106E800043553AFFDBCAECE3448C6BEB43581C9C44
-:106E90000C81B84959DB067908CDDC52269BECF908
-:106EA0005B83E6FC6D15E67CA71C966D60CF2C110C
-:106EB000C816DAEFF7EB65CBB900368E5749E676A0
-:106EC000251BEFBB948619B4E8FB908E836215E90D
-:106ED0003A5765DF1AF0D4DD2D9328AEC71DA9B847
-:106EE0000F144A45BF2DA8B2795BE19D2B3BF400FE
-:106EF0008567EE8F44C4A715FE8E832EDD46EDF325
-:106F00008ECD7F90217E6C9D8F15FE3B965BE7A317
-:106F10002AB03ECC0B59CB199F58F9A96E7FF13698
-:106F2000B33D7BF3B658FBB56AD70C537E49F85690
-:106F300053FBC59BE799EA17B52E31D52F68596ADF
-:106F4000CACF0BFDC8D4FE8EE52B4CF5DFAF5F63D7
-:106F5000AABFAD6283297F6BF02153FB5BCAB69851
-:106F6000EA6D07477D07E468D5EB229EFDBDE03E54
-:106F7000752FD89B17DC12EE737E44ED159083338A
-:106F8000D45E81B473FF78F4A7A91E2C874DA2F9B3
-:106F9000CA98552D99A09709EACF7265C2AAD02444
-:106FA0008A17B0D7A97C889B15121D04CE4C720F8E
-:106FB0001F778B31F51D97A9DF4C057D7CDF7AB1FA
-:106FC000237E79DDD679C3D4387E6AAFDC9221B0D6
-:106FD000CE7559CE9F1869B5E53CA7B1BF7D81EB51
-:106FE000D96A85E983EABD1993617386FAE523E2DC
-:106FF0009D9BECF93E22B00D48B0FE53811F869850
-:10700000F66BAA76E59AE4FBEC2111E1AA059D4016
-:10701000F5EA1752608D0272163D92356B34C0A1AD
-:10702000AF5540EFEC4FC575FD6C43E936D8AF3F27
-:10703000D310C0F4A386324C4F350431FDB0A10209
-:10704000D3930DF59876342CC7F4BD8610A6EF3691
-:10705000B460FABB86564CDF6AD88CE91B0D614CD4
-:107060003B1B744C0D79E8D1BF016E0F1B1BD784FD
-:10707000DBC37C2E8DA93DE7C270FFF7BCFBF3118B
-:1070800060EF9F7FCB8EFB6CFDE1CBCA6FFDD351D0
-:10709000477BA53C3C089D636BBD3381D1C9692307
-:1070A000A5641CECFFECF4CFCFC7BCC42EF584FD67
-:1070B000333C71FA85785DFAE5E944F4EE829994FF
-:1070C0001EA71EFEAF22E8F702AC7F60071C1171FD
-:1070D0001D26D16D7EA0D795E24D78E1F759102F8E
-:1070E0003BD783BFF62C888B5DABA8D8FFF9363B26
-:1070F00081F8D2F9032EBCCF75FED8362FC8E33203
-:107100009F188E3D47614D6B22D961B7C9EF36E7B5
-:10711000CFB70AA5781E9A6889B347035FA961387B
-:107120000FD2D9E0C3D4E867994FC171CEECCA65DC
-:1071300071337E5E83EC4E427EA57E27B6FF9F862E
-:10714000A7BF7E0C780869231F38085E71BB98DBE7
-:107150007FFB7EF949FA4C81F82A39207F0EF682AE
-:107160009DFE77111C652261DEE8B72E2286EC6356
-:10717000A07CB7693CFA9D66F8F417732EC5B7E694
-:10718000FB34220468BF469CA40AFE80F330F5025B
-:10719000C6AB8C784997E46E11C6F4C64BEA78BC4E
-:1071A000B8C6D1A10469D1B9B6DC4BEE9F9E69384F
-:1071B000A6C239AF0A47AB02CE4F45645409E8B9BD
-:1071C000736DABD2C01EAC12CFDF152F7E9B6767ED
-:1071D00071BD2561B9DBBC8E72FE20B45FA39C1D1E
-:1071E00072749F8AC99FB5313BDBDAEF04FBC0F6AE
-:1071F0002D6A771F9F7683D6174FB5FB3F55303EDC
-:107200002E11535CC9C0DF7B4A60829DE2A972D710
-:10721000FB688F7E248746DC7D09FDD4777E6E9FD8
-:10722000E97C7288B4C338F327F2818876CB3B744B
-:107230003DFDF815999DDBE4E7807BF695F9BEFEF0
-:10724000029E9BDF5685E7843EDEF78F68FF2D2484
-:10725000012FD281B416811D798ED84A014FE7C81B
-:107260006BDEF13174B8953A4A40EF052D663B86E6
-:10727000DABFA6FCE2CDE67C39999906FAA47CA394
-:107280004CC202CECF547FB35DC57E1793FA265809
-:107290005725EE8FCC57893484EAD59A677F5634C8
-:1072A0008FC211B4333FC888BF2C49667660654AE7
-:1072B00058817DC20FDAC67FF70620833DDC04715A
-:1072C000289248FC3B485FFC5E29FC56788DF5BA55
-:1072D0004F1C88C321EE12E2EE03D6DA056ECF868C
-:1072E000303DC0E76DF805C72CF915767EDE5224D7
-:1072F00022D0FD9CEA08D912B1DE1F8578DC5EBB86
-:107300007F950671FCC06A7B6A6FDCDF6897640F4B
-:1073100062F959E1D5723CF720450BF0DE218FEF81
-:107320002B9C1FC4046F019C23F540DC1ECE753AD4
-:10733000BD5B21DFE4A9C0F31F7520EFB4BF7BBCA8
-:10734000D38E419CDA415AA33AE55FBBCFB21FA06E
-:1073500099F32E904BD0675080E7A209C6B95C2301
-:10736000CDED3C7E73FE312E8F7481433EEE39DFCE
-:10737000E67047E13C0999289DEDF1B772C0DF63E3
-:10738000F0C3FD56687FA7CADAD7F27DDD3BDF9EEA
-:107390009C9E7C097D54F7A540C231EB489DD4AD3D
-:1073A000001FD67D2961F9D7D69B1A5D5563F4E697
-:1073B0002B4AF059FB04A627013E818E13BBDF64E4
-:1073C000BD877002F861422F3F7C6D385288497F3B
-:1073D000BFA7048FC583E36BF7EFEBD3FF09E0BBD7
-:1073E000FFB1FEF3FAF4DF110FFE9A67F7EC0BD151
-:1073F000F5B5F2170F78E110D3C7526B1A9CEFACBA
-:10740000DEB1DA0B72F99114F2025D3F0E8B71EF6F
-:10741000E7A63B0CBED3DD708FB096F3DD999FAF2E
-:10742000FB36F82F9FEF90558C0FECB247ED942967
-:107430006BDB9630F9D8657F9FE59BF1BC53DD7E11
-:10744000B3BEA87CFC81340D0F5585B8FF1C45FFE9
-:10745000A076FB7F4C03BBAB8E74A3DEB37E07E349
-:107460007F998CF6C03C25B16FBD710EAB8EE3A544
-:10747000AE6D1DDE13AF6BBBF934139A0EF43BAD4A
-:10748000DF5570BBDFE1309FDF34F042C2CCEE5FEE
-:10749000F5C48305EF53B8CE6E7FC52BE4C7F22940
-:1074A000D37FE7230B1EFBA5D6BF5C7552FD186B7F
-:1074B0005F1BEBB4B69FFB2B07585A2D47BDE00F5F
-:1074C000566F91F1BC7BF59E6D3B1F86F8CCDB7649
-:1074D000FF70DA7FD59E97DEB89EE6AB9E9253A6EC
-:1074E000B369B8E19EA2419F3AFADFF271BDF4A8F8
-:1074F0007CFA25451BCDCA7F9CDC4B97AAA70E2999
-:1075000064745F7C4C891C52D87EB6853E91F7A787
-:10751000815FB1EA892F14D05F1F1F14487A761C4F
-:107520007C6E7909ED63C013D293D3AB877E96F658
-:1075300075942EA8172DF4B2B6FB98AF07D02FC4C0
-:10754000E3297F3FF94BD8B7F99DDD0F78A878F292
-:107550009FBC309FD3523DE3F39FAD4E83FB20157C
-:1075600072284DC59495573CFA03E4BFC5C77F9078
-:10757000C6CEC5EA19FC5C5706CC73D12373709E46
-:10758000E524887C58F13376CFFC82444A9F8A23D5
-:1075900027F739D83A767AAB1D37114FC34202FB31
-:1075A00018AF89E11D180F64E70D7F60EC3F91650E
-:1075B00098BFE060F45AE430EEF1D1A524967FB78D
-:1075C00037B7039DCE0CD5D3218E5C47A410C78757
-:1075D0007091F62B1E9F9ACECF1D685211FF8EEA36
-:1075E000FF29500EEDDB65DD5960FA8E5CCCEE1D97
-:1075F000FF4E3E3E853B01ECD7D369D41E8C33BF92
-:10760000030E639DA676560C9FC5C83B93FFED6B9A
-:1076100098BC1BF21F9E510AF59F9D607204DF818A
-:10762000FD42E18AA663FDA1D902EA073B89C69320
-:10763000F3ED32977373BD955F28FC12ACC73D7CA8
-:1076400003E324231DD0BE2DDF48BF8FD5AB30AE62
-:10765000B76FBF861C2FE6FA60AD451F90475207F3
-:10766000B47F5B2D87773E0CF24BE535A481FCCAD5
-:10767000F85EC127BB8FBCF13D2AB79F440CB935DA
-:10768000EB55ABDC56EC9D40E2C9ED276E3F892BF4
-:10769000B7B43CAEDCBA3B909FFFD67AD5C0E3D3FB
-:1076A000163C1A7AB23F7C5AF5E4B71D5A5C3D4944
-:1076B000FF9D20457DF9D1E04383FF2AFFA506CF3A
-:1076C0000BF5F0A9C1873D7C6AF0619F78A4098F12
-:1076D000D6FABBE16F3A85C07332C6CFAB0FB0FDAF
-:1076E00067FADDD12185882F1D9739D27A74484AEF
-:1076F0006C3E6CC9472CED754B3E60691FB4E4EBE2
-:107700004DEDABF71F51D8B99EA8A99DB8FCA7E4D1
-:107710008338F101631DAA6BFB5409017FB8BBF1EB
-:107720007B79250979205EFEBC88F1F22E8AE3265A
-:107730003A4ED7EE6C7C8F60B593C557BAD46E2F96
-:10774000D893AB9358BE3B5569023D6894773B593B
-:10775000DCAF2BD0ED4D8AB1EFDE3F20A21EEF084B
-:1077600093D2787E28DE40A1F8ED20FDD5B3FD80D0
-:107770002EB0D761BC84AC30F0E354D19DB51CE28F
-:1077800035AD22DE6B5BB8E2162F9C23E93A90FB05
-:107790009D325ABEE8D722DBA60CE952468C1FF870
-:1077A00011096D9A24C0FEF57AE49F0507985FB829
-:1077B000707D7C79A8E4DF95BBEF5440EF527FEEFB
-:1077C00064ECBE87D14FC52396F203FFC8E5A6152A
-:1077D000E31F95DBCDF5411E3F18ECE4E7BEC792F1
-:1077E000B1DC7FB7C5DE0F9E2AE67FA78CD2A7EB60
-:1077F0009848E03CC1F90322D2E7FC6E767E00E3B4
-:10780000FCD701BF772BB1E7A9CE827C5DD5BF1E27
-:107810003BFBCCEF8BEE063EDAF74EC14F697A7632
-:10782000DFDB237E05F967DFCC7A87F46D3FE5A0C7
-:1078300013F755BA0E7A90FFBB9EFF4DD6DD907FB1
-:10784000CE8EF1ECAE835F14003F75ADB457801E51
-:10785000ECE2E7EF563DFF454107AEBF8D48C7A9B3
-:107860004EE64F9F3FF05FEFC1FD81F307E8ACC0EC
-:10787000BE38E842F9AAFBA513E36F5DCF7F511430
-:10788000EB27FCA5F3A9E5FB9D5D1E52B617E04B67
-:1078900062FB4475BFBA6E1BBC2F51D3764859406A
-:1078A000EBA7BCF0A702D0AF5D7B99DDD429773C74
-:1078B0000AFB7981350F34CA945E9D20648369FF89
-:1078C0006BDE280139EA8B973F615C71A0F858FCA8
-:1078D0007F0D3E049DE93F4F184C852907FFF8DED8
-:1078E0003BA0270EDA912F8DF97E125981F6CCE557
-:1078F000E6DDF4FFDCBC85E840E6BD03E63DE1EFF4
-:1079000077DED7C0A1A1D4BE72D097CF9FBF0BF3B3
-:107910007B3C7E847780FCFED2DFF9FCAF98EE7B67
-:1079200029DDBD979FF7877FE7F3EE9FEEBF9ECBE4
-:10793000E9AEC27998BA17FE84F05DA99E9312FE53
-:10794000BEE5BDBFF91BF6FE5A9BBF35271BCF9383
-:107950003AC0B0707B66B6407871EDC8992AD89D60
-:10796000623FEFD54C48607E9528B0F721C850168D
-:107970000F24DCCF82630DF80E889BDD3B93DC4D3A
-:10798000687713C9DFAE53BCACBD7ABE1FCF1A9166
-:10799000716F05219F39C98FF16E8BBFD928105D9A
-:1079A000A0F6AE74F5378F81DF238FB445ED0598CF
-:1079B000BE0F69338F63CAAA62F287DCF9E6BC5353
-:1079C00033E7EDBC3F0761F03B7C240CF16C71D4D4
-:1079D0006115CED3896325024FA538496B08FC0E8B
-:1079E000BBCFFC7D5202E17EEF5F86C78A0416A7FB
-:1079F000128571ED3AE071940DE3DC78481BF1E2F9
-:107A0000C7F7BA08F7AF7BF1DAD40EF894C03F6637
-:107A1000F617FAD584FBD312EF421A69D39DE676A6
-:107A2000DC8FBE2C9D185DB2AA399D9699E862D074
-:107A3000210E7D4C7431F07CA5F4B1D2C58AFFEBE8
-:107A400013185FF7472F832E996E1DEFD7C9DC7F80
-:107A500028013F13F2990182FBABDC7F905274BC8A
-:107A6000A724AA7EBC97007E5C941AE02FEFDE86E6
-:107A7000F1A4733F7FFFDB004FD5AF44E2A0F8EBEA
-:107A8000DCED2151F85E0A2BE09F56B689B84F40D5
-:107A9000A468D1AC987D62C30FA8FA8507E753B9F3
-:107AA000D71E9E4EBFAFDCF74101DA612BBBD1CFB1
-:107AB00009FD5C60740F7514C03E70A5C4FC112BE9
-:107AC000BFAC4960F196B3CFB9CA20AE23EC62E7F0
-:107AD0007F2B23B7C8F698734DA10499C59B9E735D
-:107AE000A15E083D21E0F928802FF6DCA9E1879C02
-:107AF0007D4260F0ED97F19D98CA5D4F75427CAA7A
-:107B0000F22DBB1FCCF8BA5D9FE27EC8945FECF10A
-:107B100076A01F2E9AE2127DE201BB44E48FDAB612
-:107B20001AF443681EF9A236C2FDEF2BF457AB7E60
-:107B3000F1FC3EB87056F5F4E35E887F9D69DFE1A5
-:107B4000C5B8C0AE4BC7E7FAF8FF9135DCFFFFD6EA
-:107B500069764F3BBEFF7F06FEA076F1D30996FB08
-:107B6000ABBB06B1F71449B4E852EF7155EDB9F06B
-:107B700028C4AFCFEEFDE45180BBFACF7F7814FC70
-:107B80000A72D0A9C27D82BA9FBF8EF13EE3BBDFED
-:107B9000703DD0F9C4E3182FED7C9BFA1FF45FE72A
-:107BA000F3A7B3C0CFEC7CEA8F69104FB9F3F9A902
-:107BB000F86ECE9DCF4C492771F4899102FF86075C
-:107BC00010AFB5D2ED48DB11F47FCE51BA83FFD9A7
-:107BD00013D789D4B07899C6E339BBE3C7C7FBC4D0
-:107BE0006FDA667DE7C6424865BF460610C7394171
-:107BF000E939660074DCCDE375916F5D328E730EEA
-:107C0000FEA0F43A6BA1E385B6458F3D0C756D83FC
-:107C1000FA8DE34407803F23FEBE3F41FF2201E48B
-:107C200068EFBF60FC0CE8379D4EB873CF852CD849
-:107C3000BFF848EE9E8BEF853C6F57211E51F9FC33
-:107C40009B284F9DCF1CC7F836E171F04ED2F38FC1
-:107C5000C52BF999CCBAED1E16FFE17480F890E6B9
-:107C6000C5721E07627C6DC487FA8B0B8D71B17370
-:107C700027C6BE40CDF67778BCA5976EC244A0D784
-:107C8000FB97DCCF30F0A0021EAE8D8D7BC68FC37C
-:107C9000F5C43D2D74037A42BCB327AE49D8137B9B
-:107CA0007561E1CD7871F4CE2D2C5EDA29C73F8F56
-:107CB00065C441AF7659E29FE181C53F2F378F2BD5
-:107CC000C5D3609786FD5AF175F6ABF8FAFD5BAE49
-:107CD000819D5FE8777FADDA7C1FE63D2538DD05C5
-:107CE000FB6B6DEF2B04CFA774B3732B7CBE67F9CE
-:107CF000F9D3B33F17312ED6143982FADDAA3F8C5F
-:107D0000FD572BBC7770786BF7B3F5E3EC5E4FD87B
-:107D10004DFB397BF839E4EBDADDEF635CEEE8AE7E
-:107D2000A7958E98F516D68F70CC7CCE3E79A8801C
-:107D3000C579E3DF1BAB71317BB3EE40FC71EA76B2
-:107D40007F6A1AA72A1451981D70E9F1CE48FA2DBE
-:107D5000D0DF997619DF4D3A1311E3BE171C70C9B5
-:107D60007C1FA195C90F5D47F19EC071767FA7F07A
-:107D7000B5043C577FE7F1D277E0FDB73BA95883C4
-:107D8000DDDFB682F169DB4FF42140EFB6E3DF13AC
-:107D900061FDDA07F88DB1FF8B4ED44FF150FD50E5
-:107DA000F46EA010D8D5AA77AE7DCB66829F8E9355
-:107DB0000EEB4223ED07EE83C0B939BC57EE9D565A
-:107DC0000AF088AA4D750A7DE721BBF97D55DEAF23
-:107DD000AC9AEF2190AFC66BD08F6F268B4B66CCE1
-:107DE0003252169F0C19F787CA13C2ABE87C7FAFDB
-:107DF0000637BB285E7C9E8DD92F1178276AA20694
-:107E0000F6D3632E7EDEC14BBCECBC833B64A37A0D
-:107E1000FD61FFF60D93089E67D8067CD9739E819D
-:107E2000440B802F8D767DEA2DE71D32E1132A5A0F
-:107E300022873317EE2550FDB26A86772BE41FF1B7
-:107E4000B0F7CDB248F72138DFB08DDBA3D960158C
-:107E5000E7F67DE7ECEBBE6F9632A578E9303F851B
-:107E6000D3F55F53E15C7CCA2DC54F0D5169852D5B
-:107E7000631ADCA34979BC786C06CDCF5FFFF4347C
-:107E8000ACFFF7E2B15934FF937B0EB2FA2A01CF6F
-:107E9000C1BEB0AE761AF0EFD796FBD9143366B9EF
-:107EA0007F05F0772EF0EE77176970AEA25BE1EFF9
-:107EB0006504A0DDD0890C7F99EE779F027F6598DD
-:107EC000AD6305F0EB63CF7F9184F716F9FBA12A30
-:107ED0006954E1DC152D9A78F112E7F3FABCFBCC7A
-:107EE000F5CB8D49C177813F9AE78DBC6F1A1DEFA5
-:107EF000E18A710E760ED0F24EA39A82745DC8E9C3
-:107F00004AF83DCB457C3E8BC590C202DFAD5C7F1D
-:107F100019EF51578B57F41E3587ABDBD5EFFB6755
-:107F20007F00783393827F00FC59DF3F7BC515B813
-:107F300000F519E55FE27D5CE33D33EBBB6844EAA5
-:107F40008EFB3EFB56FE2E5A7FF0FE9B3B28BA6905
-:107F5000FF392F687B8F51391BB350F1C3D1CF311B
-:107F6000CB0BFDD220C226047610A71F3CCF88F78A
-:107F70001FEE22B85FDB651774F0AFBBFE49457D8D
-:107F80009EB9703AFA5F5DAEEC089C33EABA5BC307
-:107F90007D3D8A0101E469E881C428F887541E3ECA
-:107FA000B7C8C3E766FE378FDB7551DBDF81FDA9FC
-:107FB000BC3F6AA0C5DC8BED12999EEE6AD0108E94
-:107FC000A1247408D6FD818E97E3E6EB37A7CF4650
-:107FD0009B9EEB9E80F81FEE8EC1FF2877BF74CC6E
-:107FE00077333AE6BBE3D0D1FA6EDD7BAEE058687A
-:107FF00077BAFC28BE5F677DAFCE4ADF3AA9F5218C
-:10800000783B2BEDC0A7B8FE18F41BB37C2CD2290B
-:10801000869E93008E31073EB501BC061D1FECE71E
-:108020003C79A99BAD73D6F1D2CA3A0607E3B49F57
-:10803000E5D64CF70E0A1C457E89CA69BA8DC587FC
-:10804000FAB6EFB7FF9C4B9DF32C5059BF14FF734A
-:10805000004F06FE6F75F3FBEA7DF17F3BB4A3F89A
-:10806000BF1DE63F00FCCFBB14FE0DFBBF8AEB87B4
-:108070002AD89FA27CF41FDACCB41C3AEE34D18DFE
-:1080800072B06487C8F731D9FB5F863E59725DFDD7
-:1080900021B817B9E46702F2EB42FEFEE527FCFDCA
-:1080A0004BEBB9C1F2B210EACBCB9F1F0CA33EAA97
-:1080B000DA652EFF6777CFBB975978DE172435AD89
-:1080C000F7BD4E2BFECFBBB9DE58E8B4C57B2FD72A
-:1080D0004887D6DB4CE7CC33A6F4F483FEA0CFA6CA
-:1080E000BD89F1B87F9509C4137429A510DE192044
-:1080F000854209F45BCCE5D7E86FD872F3FA9F1D8F
-:1081000032DF43CC6D31DF431CDE6ABE8778D56633
-:10811000F33DC45161F33DC46B768D33E54747AE03
-:1081200037B51FB37FB2293F36FA4D53FBF1C7660F
-:108130009AF213DABF676A7FED5BF34DF5D775549A
-:108140009AEA6FF86899297F63F73F9BDA471731FE
-:10815000FD78B8617911DC5B30F07278A96253A1C7
-:108160007CE9089B5A105B9EA66B059016E9E07FA0
-:10817000F5272F531C3F2A8A5DA78B896CD26F533A
-:108180001CE67CD46DFE7D8F972C7235A47E52CB7D
-:10819000089A1DBC240FCF6353F93AC6F5DBB10131
-:1081A000EAB7DFA07CD5469B206F952FE3BD019AEF
-:1081B00086D88FADB0779F1F729AF9D4D78F5EF9AA
-:1081C0009DDB3807D4CAFA53CBC64B263931CA3F98
-:1081D0002A8C2D17164FC77340FDF5ABF8165CB30C
-:1081E0007D10BC3B3C0F53A3BCA9CC16F7DCDF676A
-:1081F000EEBFD07FDADCC78EFA0CF07CCEF7DA2641
-:1082000038BF567B7B37FA511976335E7AF3EC5DD3
-:1082100063039E471A483EACF7C6FDB64534E1EB12
-:1082200036CE77D1DB33D3E09C41663FFE55A18744
-:10823000E9EB471B42D72C04C21187E95E7956B49B
-:108240006E1AF839C3F879EB4DB6F8E7A0923C0CFA
-:108250002FE9A048C15E50DD682F9C2B7FD70B4FC4
-:10826000C7DC680F2679E838F3C7B417B1FBD4BA76
-:108270007FE6E85EB80D7D94E50E6C02FD92E59315
-:108280008896DD179EF4DB832DF08E7863B2CDEFF8
-:10829000C67CB700E3D97F4CC8203A5EE39F458493
-:1082A000AFF1F075783EC8EEAEC7B8AB314FC2CF74
-:1082B000091871E60BBED98980CFC6AB7BEE07E10A
-:1082C0007B9017DCC176E8F7C24619C76D9C2C98E5
-:1082D000EA8D794B9BBF8DF7BEB2DC6CDEE574DEB8
-:1082E00000B73D93C1D5F8A8403211AEFFBDF428C8
-:1082F000F835FB5CF8DE07C5C710C0C7393DFB7316
-:108300009B31793AAF9A41EEAD6BD19E89EFA74E82
-:1083100037E6A18F34D13BE32A33FCE24619FDC690
-:1083200045496E3CEF106E8872FA9AE7DFE49BF9DC
-:108330009D5B295CAB4E88F8DEB6D6D1BAF428FD39
-:10834000AEBCCDE50F6B7DF17F4E63F052F8A77B9D
-:1083500040DE364FC3F9E3796A80FF31813C9C0DE2
-:10836000FC172C453E186C23B06FD3C74EF0307904
-:108370009EED51D97B35BE722687BE85D76CA7FD91
-:108380009579FA5DF76FF3B075FF364F9C75FF7204
-:10839000EF075797B51F8554D445B43708A91F1167
-:1083A0006B47533D560EFD1B7931F1C705D06FFF6A
-:1083B000769ABF6544F6E5ED34B0CF800F0DFBEC47
-:1083C0004E8FD9AE8CD1BB3FF430BDFB43CFC0F450
-:1083D000EE8FA1FDE9EF45E3DA35A94A7CBDF7B49C
-:1083E00087DD1FAC531582E703FBD90FD8C9E5DA47
-:1083F0003AEFFED6A5CBF91F392E834FCDFAFEFCFE
-:10840000312D11F454CA0742DC77B7862CBF6D3C7E
-:10841000D06B9BAD7833CCF76716FE78684D9FF52F
-:108420002BCCF1188E8BC76A8A479B098F3B3C97F0
-:10843000B00FBFB6BEAF30DFF3E9E4F8A67ABF09EC
-:10844000C63B37EBBD22886BD4CEF91CF5FED71E98
-:10845000A7CCBCAE187E391D6705E0A173D69F7905
-:108460007CAE03E34AAB9EB92A11E25835930D7AEC
-:1084700044F07DAAF3F939489773FBEC3AC0792EA2
-:10848000999D133DB7EFDAA310F7F8A4E158722CC9
-:108490007DCF3D79BC48A6FD9DDB7BBC48C2037700
-:1084A00061D33BD435177F5B1470F7DE4BE8E137BF
-:1084B000075B8F363A597CE54138173786DABF6A51
-:1084C00012F2657A9AED5E28171DBF1DFC215C39FA
-:1084D0003FE62FA659B24AD03316C17ED33C37EEC1
-:1084E00067F972C9C86CFA9D12AD87E3CCC4F96A0A
-:1084F00098C0EF04B84E44F1F7023CEF7660F83EC6
-:10850000F143B2029EC2FFBD1A3C09784F3AAB0953
-:10851000891AC4778A6E1E4753690AD3BFDDB73AFA
-:10852000F0F78C8405AFAA53A8FEDA3C93FD8EDDEC
-:10853000F9630B92C01F695599DEF20DEBE163B44C
-:108540008B07E76B371723E6757C574055191D924B
-:10855000336C6B8A358CC7F9F398FE25521AFF3DB0
-:1085600029CAB71ECDA6431CD8F8CEC5BF2B52FCD6
-:10857000BFCE037846DBFCF04E8FFBAB6F38CA9260
-:1085800069FBCC28BE5F5E94C0E19DC3DE07EFFBB4
-:108590004EE345D37D18B5D4FC4EB727D0B414E2D2
-:1085A000FCD0EF6DC9F8CE8BB99EA2389196BB0B6B
-:1085B000CDE5AE0A9A8FE147EB77D6F6865F92AEAD
-:1085C0003238F63738100FBF6C50FD79948F0E3467
-:1085D000F8307FB041C334DA3012CB0F37F8312F87
-:1085E000DAF46C984FFAAF7F9014BBEEC2EF549D53
-:1085F0008CE1C37572E4ADF9808FDF8888AF15AF69
-:108600008E47FEDE349A8E3A86BD677332C6FEFE12
-:10861000E9F257D24A285F0DF9D1AFD34AC6C3EF6A
-:1086200096B0F31770413AF61EEE7A25A0F993E062
-:108630007734C6343B86C2FBA4C15BC9589423FD82
-:10864000C589F0BB0B7B336CB47E9A94D7ECF807EA
-:1086500080ABDE64E7AFE7E7331F9F6CD6AFE3BCC8
-:108660004CFF660AC5E3BC71F8097E5300FDAC39C6
-:10867000C6B907331E8954BFE1768AEBE6EFB3DF54
-:108680005F4854C7FBE1BDF7CD5EC3CEA9F7C5BEB9
-:10869000E7BE99FF0E44E2E1256817293EF63B103C
-:1086A000290A7B0F8904934DEFEDCDE5FDCC06063D
-:1086B0009AD0571FCFE6FD151D790EFB83DF9788F3
-:1086C000F5EF87F0DFC3D8CCF5D3743550EC4DED22
-:1086D0006D67D45BBFEB59776D21D10BF6430189F0
-:1086E00080BD04ED8A69BBD40F0302DCEF33CED723
-:1086F0003E0BF8CDEFFDDD937D02C3EB933C7D8A0D
-:10870000FF4E49D4139807E3FB163C12DA0376CAEE
-:108710003EBB06625274E48FF87E94F83BC501E7D5
-:10872000FC530FBCCFEEE5D93A1438BFB8D25B7C0E
-:1087300013C45145A53E03F3F74E6F81FC839EFAA7
-:1087400087D8A3DDC537011FA4F3F706080400018D
-:108750000E08AAE18F63FD43B34E65649FCCF22BF4
-:10876000BD37368732215F3F0FF808F28DB4BF7DE9
-:1087700049C121C0476EE186E6633742DE687F0368
-:10878000B6FF895765FE8F3B980DF64A4F5EA57977
-:108790004F4C5E6279E260A931BF9A237FC473D0E7
-:1087A000B507D83B5DA907660830CFD4FD3310FF6D
-:1087B000E7D5B7BC2B348C878F60EB048B971BF409
-:1087C00030EEE1A6D983F77963F8619DD76CC7C411
-:1087D000DC27BC0FF0DDD31F8FAFCB36F69E4AF7F8
-:1087E0008FD8EFC60D037B5484B8B986692EDCA3FD
-:1087F000A7FEC170125C3998D65FE3CD413A5EB5F1
-:108800003BFBCDA95A2F5FA7642977803E4EB5F870
-:1088100035D95C3F8F508B7F93482B370AC1B5F019
-:108820009E6C688FACE27D935D19284767B98E22F4
-:10883000F583315FCDEFBFCB2B836B47811E59C4CE
-:10884000F46E5576A058A6DF573D978DBF0B67F0A5
-:108850005D5552246D9CBBF75CB791377E47E42190
-:10886000B5D509EFF218FB5AB5FB3764C13EFDC719
-:1088700087DE463B71496236C259D3765C81DF6937
-:10888000A96DA37C47BFFBD8D963C7A35FF287C894
-:10889000A06F02BEFED068C3CBDDFDD9552F52FDBF
-:1088A000A6D385EA688303D39D7AFDD5E00A9CF0C0
-:1088B0002EB8C949F9E9F11C5D05FEEABCB71EF501
-:1088C000D8E38A3A0AF8AFD3FBC366E0E7AA24915B
-:1088D000F3EB0F5FD6F3F87E3DCDEFB9B7EDA6BF52
-:1088E00068DF60A1D9FEA97BC48DFC41ED92DF0257
-:1088F0001FD56EB68560FDB339DAF1BE7327E81B6C
-:10890000D45FE6FB991B05A60F4373581CFA72F758
-:10891000342BBE7491708CFDBD2491E9AB0A29847F
-:10892000FB76155F7AB1FE2F1FC769BA0FDA771C85
-:1089300037D61BE354F78E837C52FDF661F4CF5F8C
-:10894000BCDAB0AF75D4FF773EC5CF6138F574E8B7
-:10895000E741D9D027D4CFA47886E71E793E24F901
-:108960000879A947FFAC6D2EC904FAF6D613B37E79
-:10897000D2254AB79712783E747F73C9A438ED1395
-:108980002CED738CFC4FB17F2B3C0F3A7BF30EDA4E
-:108990005EFA93BD270FF06DB059FA4B36C6DF86ED
-:1089A000FD19FCB7C7BBFB6578EFE9A5A440F11042
-:1089B00066DF6820875B24157F87D1C0F31EBE3E2B
-:1089C000557C798D09FFBD782F30959F6ED04CFB7B
-:1089D000A18B172EC37B3F7BF83A564142EC3EDB1E
-:1089E00023B9A67DD0FF0FC7D785A3B81F384AFE8D
-:1089F000C6708C32E9815E38F24DE55F170E316941
-:108A0000766936EC53ADB1A19F90660B3972C06E9A
-:108A1000FB5FECF71A203407E799A8616CDA57CEB0
-:108A200039609F07C6798E448E49E3409E746D0578
-:108A3000AC533F91D0AFA1E50E3919866ED5E1FD5B
-:108A40002B2A95D85F4E75B08619F5E6776287AB0D
-:108A5000A458A2E5E3D579B8EEE594DD5507F6FD17
-:108A60003677E1CF571393BCA27DB25A588AF6C726
-:108A70009AC4179B61DF383D81D9330279B1F95827
-:108A800046BC7A26AF2DF7BD7813C431B6AED4AE4E
-:108A9000067F6EAB331C390CEBF93D6EFC3DAADC56
-:108AA00075E116F8BD0A71830DD74B3129BC6B2BCC
-:108AB0009C177860841FEC8BAD60D740FB356E5CF3
-:108AC000FF5B1A42682FAFE2EBC0F6F5935438E72C
-:108AD000DCE8969261BD6B91EB6F05B85EBAEF640E
-:108AE000B3E33AD063FE96413CEFCB80754DCB713A
-:108AF0008CE5F514195B576883C18534F2C3FF44D4
-:108B0000AD12D43327D10E6B742FAB043B8ED6BF7E
-:108B1000ECA0787A3C99E385D7E7F4E8A593CDA05B
-:108B200007C515BDF9123AEF1D3F637AEA09DA3F2E
-:108B3000BC2B45E713827718BB4749E8872524C13A
-:108B40006FC7D074740EFB9D5BAA17BDE8C7493888
-:108B50005F631F4919C57E0F1DDAC37A9390918315
-:108B6000FB98CA0CF65E83E271E3FD66E37756DD9F
-:108B7000C4F8A7B37829DF677159DE4370AE5F8907
-:108B80009BE94E783721864F15CB7B0B1209CC071A
-:108B90007B4B54CDE5BF49E4FB4A83D8EFAD0EB71C
-:108BA00085D02EA35284E935248AF6D968D281F97A
-:108BB00031E06DE6C2352C0D2F8E8D27BAC8E2BB91
-:108BC0000111ECC7B45B8D784CF0F544BADEBF966A
-:108BD000C8E336FC778C536614E27E7D6612AB5F89
-:108BE00015C8BB0FECBC8D33A6619CC6B0EF8CF5ED
-:108BF000D2B0DF16729857AB425C7BC1B0EB163A2D
-:108C0000593E75B6FEE068886BB6530B341BEE2FE9
-:108C1000B3F86AF9E6E234B0CB161EBA15EDE44CAF
-:108C200095D9658B36CE5082A3E1DEDA3CF4078A13
-:108C3000374C48847D84D54E7FE27585E867E2FB3A
-:108C4000B903B5C7B6A65D3519E471AB8D1290CAEC
-:108C5000FB4BB2EE1E0B7CB1210FEDCCAD09C1C6B2
-:108C600024DAEFD67FD6FCAB68FEA74EBDF0388C79
-:108C7000B33A81D5C3BB51C09B3DE712B6E1BBC936
-:108C8000FD8D6F3D97F052127B7FCAA8FF6F537E18
-:108C90007C7D0080000000001F8B080000000000A9
-:108CA00000FFBD7D0B7C94D595F8FD66BE796566A9
-:108CB00092C963F2220913C24B5E4E9E80224C126F
-:108CC000C243B44C102A20E8F03490A7485DDCBAC7
-:108CD000FF0C043050B60657112BEA8462C5AABBBC
-:108CE00041A31B35EA8080B8D66D44DAD216FD8FD9
-:108CF0004A1510488AB5D2FEDD65CF39F7DECC7C47
-:108D00009319F0B5FFB4FE3EEEF7DDE779DF73CEE1
-:108D1000BD73E912FC4D612C94A43056CAD8C151E0
-:108D20008CF58C618CA9DE2406CF4D066FD2E2341F
-:108D3000C6FA7EA367BBE1F517666F92C3C6D82556
-:108D4000D12EFA79AA99B1A089B1B3CD6E161CC102
-:108D5000D8996633956B961F98C6A09F9A0E85B9D1
-:108D6000F2195BC5DA36633FAF3B9269DC55013DD2
-:108D70000B8E64F47709FE5BBDFC28D55FDDC9EB83
-:108D8000D7B20EAABF92314F073C6BF75A59D01C8D
-:108D9000AE5FDF51AC691F4AD251BFD725FB063BFE
-:108DA0009C8CDD5B3DFCBE2A789F565D62F6E1FA45
-:108DB000588EE313ABA8AF87F73AE6EB88B1AE77EE
-:108DC000045CDE49828A4EACEDD0B132C6D63AE0C0
-:108DD0009F2EC61E50D87C6CB7F6F715192963C2B2
-:108DE000EDD62A9E0CC798F8706ABCA86781D48813
-:108DF000B2DA67C4F5355E34D2FBF30EB35F0763B6
-:108E00001EC9F43F702DAC7F26EB5319CC539F90B5
-:108E1000388E5DCD588B2571373E67BA0C7DA10821
-:108E200038303353717E33F82BF6EBC469479471B5
-:108E3000D83E40ED67D98EA90C4073C45E7303839E
-:108E4000F737B090CA0A06CE0FFAFD28B2DF5923D1
-:108E5000B5E51BDDDAF2EC09DA32637E82D74F9A90
-:108E60009BCA4E1AC2FDFE04A6D611032EB70258A5
-:108E7000B17EED5E4BE064041EEB3B9235E5C6AE81
-:108E8000ACC0C988716AF11F59F05F135F779D58B4
-:108E9000F70746DFAD0EC05B3D0B1971DD40C146E3
-:108EA000EF58C6AC16E6457C1DD86FF1B012E8CF7E
-:108EB000666EB7007C1BBBAB9525F0DE6A87EF3092
-:108EC0003F2796E16935F0FA8C05880EE08FDA3994
-:108ED000BD99ED5B15E413B7ABDAFECDE7DD00FF1E
-:108EE000DD93024F953DAC2446ACA30ED6911E5E99
-:108EF000C739EB0765882F58CF6FECA5481746A6F2
-:108F00002485D7F3ADE1B55C0BAFC65D36A237184B
-:108F1000E7BD4418A761A7CE6F84B2CEDC63447E60
-:108F2000B917E93C06DE721C4A4C3C6F433CC7E073
-:108F3000A7EDACFC3EE4C71CE41F18C7B6EE2765DE
-:108F4000278B818FAA3717FAA0BE4D05FE86715474
-:108F5000F8BFA908C8D93B6D5532D0E9293BE7C312
-:108F60000D892E7AEE50BC0AE2355DE7C947FAD585
-:108F700027B843CCC1F1A366421960CBAEC162F9F8
-:108F8000BD1EE8EF21981BCB168409F078C8C2CB30
-:108F90002F39CAEFDD08E36E4AE6E50D3FBDB9D5CE
-:108FA0003F09CA16599E43E5870C6D413DE0DDFF40
-:108FB00082C9F5443EB5F728585E3032F0044C4D76
-:108FC0003F8465235EA62642E720B7F42F9A769B5E
-:108FD000A05ED0EEFB2784A75CFF39FBF13C362670
-:108FE000667F7E4D7F79DFAC3F18BF537775F8FB06
-:108FF000D4C49D413D6FE7C2762CA7E7033FF49FA1
-:10900000FEA2896D85E22306769B17DAD55D2C6377
-:10901000C10839D423F079B6D941725BBEAF43F9A8
-:109020003D06F9A987E4707D47AA46FE4AB95C7FF0
-:10903000F15A4D7F398E7CC257BDDA43F2ADFEE264
-:1090400064FA1E12F2F46C7326E989F8E30CD2C8B4
-:10905000F5F0381359B0F872E34CA2EF721CE6CB6E
-:1090600022B9BD06E70C24A43782BC87712E0C758B
-:1090700025255F469FD976029145AC679B1A3463DC
-:10908000FFDBDC071CBE18FC20E544B8BD51DB1E2D
-:10909000F4231B81F4ED6348B7FFAC7ACC91FAD48A
-:1090A00066F038506FA8F68A232E37344D7E6486DA
-:1090B0000A286951393D7FD9B681E8D16E701F41C8
-:1090C000FCDAED3A971FBEAFB7E93C48272D0E7387
-:1090D00000F1BD51B9C1817243F66B07318FF3B80E
-:1090E000601B427A3DDE7AD58B89540F669219A9AE
-:1090F0001FFFF7C683C5170F1C8FBD31F1880BFA10
-:10910000574B746E0BE00B91FA71041D44F763DF4B
-:10911000A9C69C77743D09FFB8F836841211FEE7A2
-:109120006DBA198118F32E4D56BE9B9E5A1425DF39
-:10913000937F3B3C88ED95D00F0AF249FE9626A31B
-:10914000FC2DBC9058E922399FEEB573B185E3B68A
-:10915000D88E9A7DA48F98ED13D9BF3E3EFD49B8B5
-:1091600018DEAA64881F6004867AE34A70B02B4137
-:109170002FE29715AA0CE5D3403A6FA7F9F4D777F9
-:1091800043E711EB6F51DD0EA46BFD751E33CA99D9
-:10919000F58E39E6109437AAAED9F92087FADE02A7
-:1091A0007B12D6B729ADC81C8B8F5AC16EC4F92D5E
-:1091B0004DD669D6239F661DE7DFE8F75B92B99E1F
-:1091C00068DD3FB1C753129F7E40D279518F9BCB50
-:1091D00054C756589FDEC0E76B896307CA7EE3C158
-:1091E0006BCB7E0BC96975A83980F644F4789B5423
-:1091F000778F07BE6F82F9F8B19CC3C7DF54A23ADC
-:109200007643D71657023347D437384B08FE176CCE
-:10921000694C0FDF37213DC6989784D3BCE4EF68D3
-:109220003FF9A2E832F7B7C3D9100D5DB6C6A2CB9D
-:1092300079A8374BF9FC993972FE4393BE8E7C8C2A
-:10924000A69BB249CC837C9701CF76586FA7CA669C
-:10925000EC437D80B6D64498DFCD36E600993E39A2
-:10926000B57C6732ACB7ACE78091213F743A691D99
-:1092700075A27DF4B8A6148E3F538A839E49C73DDC
-:109280004F4F01F876F624B814F8D49902FA300654
-:109290007C8F08BC33D6C69F6A681CF28FAC5FB661
-:1092A000887976C3F350026B3583BDB24FC807C6C9
-:1092B000EEE74F151817C699FDCAE8DD642F8AF549
-:1092C0001F02B580F5D3D343E314FD77C0DB5E58AE
-:1092D0007D04DEEACD21C2DBDB46DF6B089FC6E3FF
-:1092E000A1742C771E3D9387F870B670FBB5EF25FF
-:1092F0006B00E96E207ED6D3FCEA2E0E62FEE28180
-:1093000078AB5383A45FEB2EE6D17758B7DF9C127E
-:10931000FE3E1B6C8609B02E66E67042F8C4C2475A
-:10932000BBE06B890F50EBA3ED021F08A78FC43E73
-:10933000A71FEF4EE36606783F6BE6EF996724DFE1
-:1093400087097DFE51425E00F7331F0D07CE467A36
-:10935000505DE9917AA7CEE2B96F3EAC9BBDAB6799
-:109360004FC06359A5AD15EDAB65264F12DA5DCB45
-:10937000DED32BEBF30984C4072B043CCF32F75D1B
-:10938000883FFF368BE309C29F76FF97BFA3BCF8E7
-:109390001D68BFA24BEF46937169A5CD8FFD96F571
-:1093A000543C6D87F72B5BAD2E06FD2E9BE2FE0431
-:1093B000EDBD65F7595C1BF271BF38A43C0BFA5D3B
-:1093C000FB60BE03E581759D37D3EC0693E07EEB31
-:1093D0004C2BE06D93B264895208AC7D7FCA1615A0
-:1093E000F0ACFE57E56716285F757FC116F3758CE4
-:1093F000BD82B21CED59FFD09968DFFE12A746F678
-:109400002EB76F7F794427CAC55BA6820A18E5ECA0
-:10941000D4D960CE2B538AB79861FCF4144FA10EB7
-:10942000C65B93326126F6B7F4BEB17FDD09DF7704
-:10943000A4CC9AA9E613DE447BEFCCCAA1D06E92ED
-:109440002CCFB354427F695616B6A72700BF0F0929
-:109450008F8FF67767BFFDBD60E6D41CC04B4553C8
-:10946000A50AFDBF9E72DB9631573136FE817287A9
-:1094700007C63F98B264A615F0DF6994F5976DF1C1
-:10948000C0589DCCF78601BEFFF1FEBA9966A89F31
-:1094900096EA2D74C0FA53CDF76F9991FB1DF865CC
-:1094A000A412BD4F2C487112DF1C4690E6ADEB3381
-:1094B00072FD2AF83D87D3717F792494ED11E54C34
-:1094C0005EEEDC105B7E9C4EE572B93321F6778F41
-:1094D000904B00EFA00EE9B3CB1A18961F9627C049
-:1094E0004FE609C45FDBB93C01BE9A63273E8ED9C3
-:1094F000DF37E55F803BF5D3A97AACE8BF90720D0A
-:109500006666C571BE4C7669E47559CF5292B7BF95
-:109510004A157CEBE2F071566AE50A33F70C47B85E
-:10952000C8768BC53AF3474BFF52D088FCB9D6E2D8
-:10953000C9C0F9ACDD579EC12E6387D75D2CD7F823
-:109540004BC2EB984AEF07F40BFDB944FFEE315FD5
-:10955000075EC95780571A7DBFD23AC3FD69FD3BEC
-:1095600003FBE37E9E017AC5187B9E1B53B85E41C8
-:10957000F8EB22E4DA4A215F416A913D7EFEC5ABF9
-:10958000766FCD8F1C7703F50FF87D7A0AEE2F41A9
-:10959000BEA21C2B533DB3B07E594F8A03ED79A078
-:1095A000B78D82DE54A43789E7CE94A6725AEF763F
-:1095B000C5B13B861DF81339AF36C583F649C622BF
-:1095C0009F7E49C4FCA4FC87FE3B45FF259C9E1F53
-:1095D000EDA7E7C5C83FC22FC4DC40DF6307CE5FFD
-:1095E000C136CE08FDF5822580F39170FBB6F42FCD
-:1095F000ED87BAB87A2A91DA651C0F26BAA09E21A7
-:10960000C5C5F9B9E3E3C46B515F75E999E2E2EBD3
-:1096100046B95126E5A4BFE748854A764C582EBB8B
-:10962000C89E917233683687EBDFBFBD67C646942C
-:10963000AB26BE2F4FD383142F0ACFE3E514AE2FF2
-:1096400027F89827961D7824D92EE508ADE3E17513
-:1096500095EC63589F5DE8D709213FF9B39E4C66AE
-:10966000C23EE1F090FA7BB629F4AFDC4FA6A547E5
-:1096700059063BA5415710EE1FBFCF89A0FB63825F
-:109680000EA2F1F35DE513C0C18F70484DE172C8C1
-:10969000096505ED0B15F417C0FF5CB5CDBD353F71
-:1096A00062DE362E8F9D7A1D976357E08BB454FE91
-:1096B000BDEF253BF173181EDC8EF92F01F7761DE7
-:1096C000ABC17DC1211DF009D2A28DAFF3FC8B5936
-:1096D000D4EFE7293AB9FEEF452EB71B613CCED750
-:1096E000643FD6BF3CA85D3B7FDEDFDC544E8F6518
-:1096F000C73D8568C70CF3DADCB85F28EB9973C007
-:1097000000E5E1DD8A036B4B3A1FDEC1F914A84B7B
-:10971000C0E5AD6722FBB5A5723AFABED631FC387A
-:10972000A757C4CBE2083ECD4DB57178C1FA4C08BD
-:109730004F552B47E5F3FB9B87F78001D65B07F07E
-:1097400040B12DE1D6D9B1648305F9F83873231FF0
-:109750009FEF58A21B8B78DDC9C8BEEB970F0FF0A7
-:1097600075487B14E8B203E9F2EAD45C1A6FD87149
-:109770008F750C7C1F867613FA953BEC01DC574CF9
-:109780004EF5CD4D4578CEEDAB64204A1AAC4DEB8D
-:109790002D11EFFBEB77417DA2639F7E2CCEF3363C
-:1097A000C6B6BAC2EB81A9FAD11F5A6F043E2DA0EA
-:1097B0007210E1D669E4F5FB16338ACF34E8FB8CEE
-:1097C000F81DF4F72CA2CFA3BA14C42FEE9BD06ED1
-:1097D000AED37B7314DCD76798DCA807601F42F414
-:1097E0007EC8C2540BF4FF263C514E57E9EFD88F88
-:1097F000F0AA2A50DC2D24AEDA85DC6041DC37CDBE
-:109800009E62257A645FDD39B41AF5BF95E309FAE3
-:10981000318B7ECCE6A230FFFD3AEF2ADAFF48FD1D
-:10982000764851A89F43D78DDEDD12B12FC2FE507E
-:10983000FE1F52AA73EE40FA17FB3AB20FD3C27A58
-:1098400017ED95225B24DEFD627EA13CA4A3487B3C
-:1098500014EDD37E7BD6DFB1653AC8D9F1333A82B5
-:109860003A0752D1F333FF01D65105F6AC05E0704B
-:109870005B2A973387F2FDFA449CDF30583FBC3AAD
-:109880009CE01BD3640B8F932EFC0FE946EE2F4810
-:109890004FE0CFBFA7723BE727695C1EFE218D9783
-:1098A000D31363FB2BBE10F55413971F5BCBB9FC8E
-:1098B0008FAEB741F4FBADEDDE318A667F0F76EFF8
-:1098C00086546EF71AB95F88C713960AFA063B8763
-:1098D000F014B6AB783C50DAA15FF4CCA3F272F38B
-:1098E0007BD9E8BFBFED9FE6DD87F4B6F2377AF2A9
-:1098F000579C14F18295C9BEF464DCBF27C4F6AB53
-:109900003C27D675BA99911FF8538C1B82EC3D8980
-:10991000714328AFDAF9E034E4BFD52C40FEE0E52E
-:109920003B37515C707940612E05F7695EEE271672
-:10993000F858BD47AFF14BDFAE361993C784E977CE
-:10994000459B366E58B3AB5853FEF6F669250B446B
-:10995000C8A1B0FC9946EFA3FB95F41E6DA77ED479
-:10996000ECD2F8C397EE1C46EB97F5973137AD77FD
-:10997000596B8166DEAC95F349BCF949BA45BBD455
-:109980001F739E46CDFB8F00FEFE08FFFFD25343A0
-:10999000691E2DA9BEFF40BA09CFC3CAFC1ABFDA9F
-:1099A00024C727B05666E17E49A023FFE5EC81502D
-:1099B0002AA7FF6F0FF7D171F605E3FEBFEE0BCAC2
-:1099C000267139CCDA14360C1EE3A76AEDB4BFA0B9
-:1099D000BE2BC5A795EB6B61472D5FA4AD7751D426
-:1099E000BB28EA5DC9BF12699F290528D7787F0D7A
-:1099F000828FF3CF1C35BAA0DEF8346EC716393D1E
-:109A00009750EF6CB3248E437FCA364B5E00F552FD
-:109A1000FFFABA381D6D33483F8A3B03E1D6FE5F3B
-:109A200077B6A888C77DB00F007958FEE841168A3E
-:109A3000905337AE533CCB01DE7621EFEADC7C7DE0
-:109A400075EEA07128F4935DC7E795D3B15F5123FC
-:109A5000DAE5D4087F5F9A41B3CFCCC1324E258D71
-:109A6000CBE39C9AA03214EA65EFDAA3A8D85F870B
-:109A7000427A33BB0900134157D925DCBEB9B1A4E2
-:109A80005D5936260C87565DF51807E0A735DDEAE7
-:109A9000467D738FD337240DE7792218C4EDFCF887
-:109AA000133D2ADAEF3F757A0AD29C6138B8F48EFA
-:109AB0006CD4A7D6137C9E6DFDFB63AE6728A24DC8
-:109AC000FEABDDDC9ED1B3238CDB87A4AFD2378C19
-:109AD00024BD27E7979E22F4453AF33D67A3FAADEC
-:109AE0008CF0C9683DE91B86EFE6F62CC7775581F7
-:109AF000770FBEAFCAB8AAA805DE176C0BAA4BA198
-:109B0000DDCBBB62FB83CB853E81754CC2F5C9754D
-:109B10005C492EC87A86387E0AC90FD619B1F71F5C
-:109B200030227D2F7F346D21CEB76EA39199943072
-:109B3000FC7FEAF4CEC6F96477B42B081BE9DF9307
-:109B4000E34AFF1D7E47FEFCC828F996D35F5CFE02
-:109B50005FA7F72C8F94671B8D8427693F87E7C722
-:109B6000EDFDD5695CCFBEEAF42EC1F934746D27E2
-:109B70007FCFAA3D1F1A63F9ABA3F9E24A70546A7A
-:109B8000F8BEA06EBE3980EB2F7F54253AA8DD6861
-:109B9000A43859DD33FBB89FE71EE6463951D7B1EB
-:109BA0004F590EE3D63EB34F591101D74175010508
-:109BB000E733C22EF990CBAF68BA473F32DA2D8730
-:109BC0002D5C4E9C2DB7F91580EB5983AF0EEB9DA4
-:109BD000CDB2BAFDF9613CBCB96FFA11CC37B03FD8
-:109BE000670AE2B355B73BD30CF55A4719DD485F16
-:109BF0003F75FA36235C52546F27B64F4EB3BBD72E
-:109C0000435B978915A1BCFBBA70181F4527E3EF8A
-:109C1000E1FCD3857288DB9145C83F8134BBB4A792
-:109C200048AE1D36F0753CC7F87CFF9EEA7990E897
-:109C3000F8480A8D9B5D1754D09F9D7FE639926B43
-:109C4000B2FF309D791E89E4DF2BCFB3C388F45671
-:109C50002BE450F9A37B948F23E6FD4B30F4916EF7
-:109C6000B29F01BAB4D1F7FD33D3A83E33B9F0BDEA
-:109C700042ED6AE1FB8A087923D71143EEECC3F584
-:109C8000D84EF41CE47227C8FD8D62BED1F87C1555
-:109C9000E51F7C9A06EA99DE1BFD23312E7A78486F
-:109CA00002F527E54034DFBE2AE81CE5A5CE46FED6
-:109CB0005AB22BE5FC64BD2267C5FE3482430FC156
-:109CC000A17E974AEBA9327A87DE11C10FBF16FD3C
-:109CD0001DB8F90323CAFD07FEFD5DA2C7FA36854C
-:109CE000E2F1ACED5DE33CD447FEA7F46867CEE259
-:109CF0002601DBF1C2BB84A7599D5C2ED777EE53BA
-:109D000097D9C2749A7FE6C0AD4867F51D2686FBD9
-:109D100022A0BFDF207CA2E954C247CADD78F8B494
-:109D2000CEE07294F98DE44785FD543EFA29A4DC17
-:109D3000FE7BAA4EF809F8FB0B69BC1CA61FDFA727
-:109D4000088FB0DCB5105FE49F293A60C67DB85B30
-:109D5000213F7F5A258767E4BCAAC7C6979BCE548C
-:109D6000A137D450DE1C7B58BEF7CB7FD1FE0B81D0
-:109D70006F781FE4EFD910D4F372FED1F8CB77726D
-:109D80007D1B83CEFE1BD711ADDFA43D20E9E6C9C4
-:109D90005DAA468FD89D46EACF0E1B739CC78E7274
-:109DA0001ECFD861E0FA6CC77A7300E5C99B0B78C7
-:109DB0005E997DA13188CF43BAA575F8FD50361F55
-:109DC000BF55A75B83E5D60D36D64278F5243A4BCE
-:109DD000917E1219978F5C1E3EF03C9767757E5BF3
-:109DE00080C13FEB7C739753DC39CDE2C6B833F3C7
-:109DF0001D34CEB30FA42BD773FB8D2E783FAB83CE
-:109E0000F39FC403C853A22FC90F12AE617872B872
-:109E10004B7E92F8F8BBF46703BD7CA7BCAA3DDA81
-:109E200078DCDB46DFD54EBECF3A6C70A19F86C78B
-:109E300017E2D16FEDBAB7B34F821DB53AF32D7A61
-:109E40004ABE85FDAC86BF2709BC1738B9BEAF74C2
-:109E500072BAA92DE920BEAC3DD944FC6C9BC1E58A
-:109E60009AED84561E33F6CF62BDDBA85D95B563CF
-:109E70001AE677543DAE3870BF1F4F6EDEAEF0FC71
-:109E8000B84F77BD9188F972EC2BB0F2319E62E148
-:109E9000EB9DEBE472E2EC5E0038D17B93F172F65D
-:109EA000FB95FA63C1630AC2B356C0FAEC3395134B
-:109EB000FF847EECBD49EE61B0E4CF9EB9E9EE3F90
-:109EC000C1BCCFEE99E246F7655A8B97E8A7CF69F8
-:109ED00071E37E03C4F70CF417AEEF7823F15A68F0
-:109EE00077FAE9AB8B506ED78A799E795EBF0EE127
-:109EF000B2E1C97F9B8CDF6B034AAA09C7D9FBF883
-:109F00007F6763BEEA9E46F217B53CFDBA11F317B0
-:109F1000748176FE7E6F9203EB9DFEF9F6C908EF21
-:109F2000968E16FA7EE6E7ED543EF0E4BFBDF67776
-:109F3000F4E37813DD58EFCCF3FB092F753E95F26F
-:109F4000DBE2D1F58E7DFBB9BC443D8F7C309FCBED
-:109F50003149D7927E4F3F79DBC448BD21DFB70A34
-:109F60007F4E6B02D7239F09FEADADE0F1CECF9EB1
-:109F7000B5CCA7FD8131341CF7C57563385DDC2D88
-:109F8000E051D77187A1C146EDA99FDF02DFE373DE
-:109F90002CD0E72723298564CF25CAD7F957AA0FE4
-:109FA000F526A0BFE7E6451F2A381FEB9826432D6C
-:109FB000CDF369FE1D561DF9BD6C6D6C3FFBBF38BE
-:109FC0006DC22EE07C90DD599DE3223960720F8BCB
-:109FD000B087B36B7C2D1827BE7EADCFAD073CBEDE
-:109FE0007CEAE8B441507E72A4524CF8D72B5CCF87
-:109FF000F96D344E3DFAC1818F760B3E497730F5CD
-:10A000001A9203DC1F50A532D5467EAA3E9213F564
-:10A01000AD420FEE117E6E735FDE4D766A67BB2632
-:10A02000621F06ED6C362AF7E5FD10F34A67F8E784
-:10A0300093DE711969BE67A43C607EF27B4A7E8B19
-:10A04000F61BA1BCC1FCD1579DE55D281FE5333D42
-:10A050008EBFE4EFE2FBB8744F17CA15B63755A3AD
-:10A060000FE2C99503379FE77AFB950F890E1B9086
-:10A070000E717CDF498DDE5E4EC215E8F0A50F89BA
-:10A080000E977771F9DAD0556EC4FDD40EE1D76919
-:10A0900010F4847484FBE8BF3A93699C86C9A1E1FB
-:10A0A00028A7CE0BBA3BFF12A7B7433A1DF9010E02
-:10A0B000ED1EDDDEA20CD48F4A8D97F0DD00F8E6B0
-:10A0C00076F3DAA36867D5D73037F26B43A7E0079A
-:10A0D000B07B11BE0D5DD5CBB1BF416933C9DF0D7A
-:10A0E00076C9B441506EA863A5C86FD9BB2A5E4239
-:10A0F000BA605D7C3F9E5D03F62CD24D5ABD5B9FDE
-:10A100008F7A8FDBBDD78F2CA3F63B725D14E7F2FD
-:10A1100057318AF3EF40FB19F55DD6686E3FFB3689
-:10A1200092DDC55C09E437653E750DD66FF02F6290
-:10A1300094D711CDC72F29B40F680858291F685626
-:10A1400017B77F1ABA381F9F93F0914F43CFADE4F2
-:10A150008F7FC1C4FC11FED0375F9ACEF5EC8B2601
-:10A16000D2B39F357BD8C7B0A0B785BC9770AC6D14
-:10A17000CBD721DD32769309E7B14CCCA3CDC0F526
-:10A1800046B2D00305DBF83CD474E1774CD789A7FD
-:10A19000519BE7E2F0937FE19C188FC8225DE8397C
-:10A1A00018BA7E7990F8A4EE19DE5F9AC9537867E1
-:10A1B00004BD4AFB289A1E0BC4B8D9BB0E2A284CF2
-:10A1C000B277CDD1F0F9F5352CD808EBBC7E972EBF
-:10A1D00038651CD94D0B499EAF37B258F92A23D2A6
-:10A1E000B9FD5695EA2D44BF76D5CD3677A43FB953
-:10A1F0002AC1A3B3A01D5724FDD8DE128C1B9D4A93
-:10A20000B7BB116FE3D25DD20ED3D85B03F7DFDCAF
-:10A210000EBCA1CD3F0EF71F81F509F329AE09DA77
-:10A220008DFCDC0E688FFBF7DDD7FE9CEFDF5BB8A3
-:10A23000FF020407C999546F09FA8F9D05DEB55CCA
-:10A240003FD9DDB1D6F3AA93AFE7C0CDB716E23E52
-:10A25000B161AE8DF8E1815794A59CDE4011E2BE5C
-:10A26000DAC7F983017F3CE1227A243BAAA1C91B0A
-:10A27000884D8F9C5F1AC0AE423B1BE8710DB793AF
-:10A280006D8CF313A74BB9BF47B91569CF4A3E8D03
-:10A29000E67B49BFFD7CFF35F9FDBC81F3E37980A6
-:10A2A00003D27B3F9DBFCCE97CEB7AE047F8BE153B
-:10A2B000F8B12542FE47EF7F709EB81F90F2F61E60
-:10A2C000A777513ACAA1DD6F6DC650AB948F0D2FA1
-:10A2D0006F197E39BBCB8C95A15F33F06B24FD6089
-:10A2E0008CD65E444F3FEA09EBBAD8FE8FBBD26DE5
-:10A2F000DFCD3F3F302FE5AEF4D2817929E9A87355
-:10A30000106FBBAD01B48FA51F297A3E4B049F4946
-:10A310007CCAFD03C621B0FEFD82EF37897A8F88A3
-:10A3200067C4BE84F8C1A5F37D4879F671F4916CD9
-:10A33000F77DF9B5E438522F46D38D8CA3E07AAA85
-:10A34000C7C4AFD7B65FECCFA2E8F829C15F0B80D6
-:10A350003770DE6D86E017C48F77D819E513F8994A
-:10A360002715E371AF8DE07C34B26F38B6B766FA6B
-:10A37000BE44BA927E5D7C8F71AA5A11BFACDD6B70
-:10A3800008449E7FB93783D138BD76B35F0FFC9107
-:10A390009BE9DB87EDFD15CC1D443DF38F168A2B21
-:10A3A00081815B8AF2A691851211CEEF25FB5E209A
-:10A3B000FAD5F70C47BFE33925340EDF9F10FEDADC
-:10A3C00013C25FFB7ED77BCFBE02AD17BF726EF1AB
-:10A3D0008F91CE5EB4E4217D9CB0F4E7BF25A1DD72
-:10A3E0007D81B9922E770E699159EF5523FC67272D
-:10A3F000ECB1FD7F6F0B3C378A782B5319EDC3B757
-:10A400006770F9193EBFC4E3ADEFEBB4FE37F91C3A
-:10A4100093C1E1DF19E71C506106DFD7740EE1FC40
-:10A42000D8D7AE50BCAF66DDFA3FEB412ED4ACB509
-:10A4300007E9099FD18EAB71F8833A289F3070B934
-:10A44000047F73CD6561FD07F5D449C8337E07C528
-:10A45000BF960AFDB5ACE9CDBFA15FA14665E6494F
-:10A460004518C7F21E1E049F3EB52D4F44F1BFF2A2
-:10A470004777A6A37ECA58D426F2C1A63AD0FE5585
-:10A480003C37E82F592F676FA96427131D00DE1E84
-:10A49000CCF0F6221F2F4AE27EC145775A03FE0810
-:10A4A00079B857F06134FD7C10E7BCCD97191501E0
-:10A4B000EC6F61AAF76FD4EF9DE73472EDBC12FA2E
-:10A4C000C523485F77D8DD4FF0EEF222F363D20563
-:10A4D000FC6B310E04A2B1B7B067F8BA7CA4E3BE3E
-:10A4E000BCDFA15FABDBE4F0BBF0BB91BECB76F190
-:10A4F000E241F1E3402E23D247C34585E86169F785
-:10A500009BC751AE37A821A293A5661BE1B1E1A27A
-:10A51000CAE9A9D5703624DB03EED7A47AD232601B
-:10A520009EFE7B2725533C09F889C3172A459CE3E7
-:10A53000F832C3372803E0F79035F136DC7F5D3021
-:10A54000BB92308FADD108F4703575E73547D843ED
-:10A550002CC7AEA583EEB7FE86F35A6EF61951AF3F
-:10A56000AFF034D179B14549C152C79848BC4FD2F8
-:10A570005F1AFDF5F17E49C897F78D3C6F64209D09
-:10A58000733C6CCF10F5B239BFBC9FC76A9EC3E75E
-:10A59000287842BBF787887291280F17F5D279790E
-:10A5A0009AE097F7C7F17AD1E32C15E37C99E1990A
-:10A5B0008C7082764123D2C76B163A67C44A40FE3C
-:10A5C000A1BC5B934B762CC8B96908771827984CC7
-:10A5D000F54CA4675813C841C0676FA98BE0B3B5A9
-:10A5E0001CE805E341AF9A281E24F12BF11A8DCF08
-:10A5F0008519CA77CB4F1F18BF5E98513A307ECD70
-:10A60000D850C217D14B8CF31FF1F0F56B3BC70349
-:10A61000F0EBF20CD283C1B1917CB349C051CAB501
-:10A62000F713B478FD3C9DE3A15ED4BB84761FDABA
-:10A63000D1EE3EE2BFF75378FDB402AE97A45DFEC3
-:10A640004F022E5FA66B9F52CF44FBD1BF14F2E2A4
-:10A65000CB74EE4707BCDE8DF395FA09E44C301954
-:10A66000F878D1EB2692336C631FE5D540BDFF83AC
-:10A67000F05A64EABB3515F4CA0FC1DE311651BB7E
-:10A680004B284706ECEFC748BAB033D4DBAD190E00
-:10A690006E1F94F4F1B8D748BEAEA50CE48772657E
-:10A6A000FC630C210BE4F06B22BF42C1BCAE146210
-:10A6B0006717F60770FF978CD230DCA3C73B21E801
-:10A6C000E0D10C4525BC15B242C4DBADEF7E6E5F18
-:10A6D0000C5D9E13E765934DBE76ECE7ECDD6F9164
-:10A6E0009D7EC2181CDE668BF1DD187CEC2125FCFA
-:10A6F000FDB6A7F47EE3D5987F7EF6C19B61DD4B66
-:10A700007BF46E1C72E93D5FBC331EEDEC1E03C58D
-:10A710006B40DF6F5371DE4DDCAE3CA1D3D2C1671D
-:10A720007769F73DAF0B7A90E772A5DC91FA7C155B
-:10A730007373799390B81BCB1FDD713B9DCB5DCEBE
-:10A74000BC873D00F7D36B66925D7C3BF3515ECFD7
-:10A75000B256ED39DB156DDAF2ED3B079CC32539B6
-:10A76000BC2A10FD5EF8A52B63EBFBF3822E3F3372
-:10A770008AF8FD7A53CCF8FDEF85FC09C7D9FBB404
-:10A78000F1FB572F1FBF6F8C8ADF87ED88E8F83DFC
-:10A79000EFF713616F60BF9171FCCF2A62AFE3A343
-:10A7A0000C69B75835F9199F0CB05B12E97BE3458A
-:10A7B0004B9CF9D8E8FD672B638FD3D73F8E365F6C
-:10A7C00020DC9EE709C8FDB5A493C68B59A4676534
-:10A7D00059DAC7E17639F43DFABCBAF46F4BBEF8EA
-:10A7E0005861E62CF2476D1776BC9BF2333F46BBAF
-:10A7F00008F972BAEBB5104C71D98F270E578784C0
-:10A80000F9267A1D405F674211F2D898694F23FDFF
-:10A81000EB666E3A9727E8FED6BBABE87CCFFFBD70
-:10A82000A73223326E2AF7530D46698FD934FA9630
-:10A8300045E9E3655D6F911D06F6D770143E7F7A9A
-:10A84000F56ED2C32B99371DE9BDF7D511746EE5AE
-:10A85000DBEA61399F9BFC4B0C3CBF358DEC8739A3
-:10A86000623E3775733B5067F618681C0F7339D218
-:10A87000698BCDE70B425485F275FDF347E71D6305
-:10A8800093C4FC156C0FF0BD4E3CD9525F26CEDB55
-:10A8900084E3EA310D269089CF96896E173EA7286A
-:10A8A0005E95CF83E3791A6BCAC1FA3A7348CFD762
-:10A8B000093348C7F6FDF0A2B25D9437CEBD70EB08
-:10A8C0000A7C6FB3933C318A794CCF04B988FC6D14
-:10A8D00066665CB7C9163C4DF133F1F457B8888F02
-:10A8E000FD4318F9411258079D3FB5D9CEF971B112
-:10A8F0000EE650B06C715C08E27EE29CC3E6C7F3E2
-:10A90000C4202F6765A23F5FF9D54AC40BC867EE24
-:10A91000178AF75D0DF2F31142DEA588F9B50879C3
-:10A9200097C5DC8AB8C780E4DDFDF69537E07E2662
-:10A930008D79F7A3BC7B387106C5FD32988FE693FD
-:10A940003A43D5C82DA7575BCE98AF46CB3B05E71A
-:10A9500097E5D3BE37B3139497A404BD9997526972
-:10A960001F3612FD310621378E59783EC26631CF2F
-:10A970003B3353886E8E59785EC2B7B65BDCDA7DA6
-:10A980007D430A3FBF7F3EDD6CC6F1C08EB913E147
-:10A990000776CC077E16CEDF2C9CD24179029B6FC6
-:10A9A00054DC1BE0FD66BB6BBD0AA4EB9FA9707F66
-:10A9B0008FEA28C77C9CF63C871BF3441B45BEF7F7
-:10A9C000668BA3F619F2639A783DD6B719E396ED34
-:10A9D0005B1D0EAC9756D937CD88FBAA15CCB19B21
-:10A9E000C5A0F7AF808F60BE3FC732E04911F46366
-:10A9F0003DE2BA85D620BEEFC17F17F0F29432DC7B
-:10AA0000BFF2BF82EE423A77C93C7AD2978DDD859C
-:10AA10006FD860BC82B985E4AFF756F2B82F1372D5
-:10AA200060BC1C57F0D9B561BAA7EF85A23CB45BF6
-:10AA3000F87FD34C3CAEEB8021CAC49143AC9FC697
-:10AA4000F9C1CDE41FE7D36B58F80FFBAB0CF74F00
-:10AA500072696AF87398EF60A822B3BBA50EEA8DFD
-:10AA60005783FB91AFAF15CF42F13C547E23E9E50C
-:10AA70001E9DCD65D4713E3717A0ABC3AB47B894CC
-:10AA800039B6B4603FD729417AE6CDD8DE82D39F6C
-:10AA900023FC4CC999C6009E376B99007826BFC825
-:10AAA0009F0FA3FF5AFF2FAC18F174CC20F59E27FF
-:10AAB00089E7FFB9683DD50E3E5997CE337B2EC24C
-:10AAC000F9283FCFC6D0748BF8FE97A9554997D780
-:10AAD000BB3C0F30254BCFE5E30C1E876D9C6FA66A
-:10AAE000BCE546710F03537DF93F8CF0AFC8B8C584
-:10AAF000BB06367F5F8CFD464A16B707E6DCC0FD15
-:10AB0000C28D221F477E4FCCE27EB2BF644E7B37A0
-:10AB100093EC3D1E6FFD9D945F23D948945F11F225
-:10AB2000E58F245FCADF8E277FB4DF85FC99E72994
-:10AB300036D0BE40C82129EFBD22EF6801F31810BE
-:10AB40004F3DE21E95A3E5AB480EDDCC7CF4FEF74D
-:10AB5000153CFF0008D380FDDD34436B3FCDF36A25
-:10AB6000CB37CF8FB6AF383EE4B80B7CDAEF73A4A7
-:10AB70009D3C436B272FFA87AF9249CF67FCA2FE1B
-:10AB8000D2E0703E5163543E5183C8276AEC2A3CA0
-:10AB90009416914FD4D8CDF3891ABAAE944FC4ED20
-:10ABA00029AF29B01FE324DE5AD294EC0D917F72B5
-:10ABB00010F34F8AC2746EAFB0F33C0CE6A1BCA296
-:10ABC0001C8795CE5DB4EA8AC88FDB9A68D7F8DD1A
-:10ABD000B7AE7755613DE9BF95F9434837B1F6C344
-:10ABE000D9597C5FB343E17E74FF0233ED3B9D0591
-:10ABF0005E4D5CC1A967C7D1AFF86EA64BD6273FA3
-:10AC0000C90E832FAB189E0185D17989FEF67AB6DD
-:10AC100091FC905172CA99EAA6388033692CF9F5F3
-:10AC2000E77517923F92D92CEE614AB8FF7973DB32
-:10AC300055CCEB69EC6E5797DBC27437364BEC435F
-:10AC4000ACCC8AF4DAEFD77BCE447EBD6493B730C8
-:10AC50000BDAD71983E4BF8BA0577A1F4F5FDE2E24
-:10AC6000E8C550E15DB002E6D7FB8ED18DFB6B0AE3
-:10AC7000CC41FFCFBF944C7E49750E233DB5B19CAE
-:10AC8000CB935EF493C13A3E4DE6F7FA6CAC66A402
-:10AC90005FCFA74C233A5EC502873DE847DB0574CA
-:10ACA0001879CFD21E6DB98E7590FEA97B66003DD6
-:10ACB000937C94F2B89EB9F4068C1B746ADBB3A142
-:10ACC0005A395C28F447F1BCA92D98FF50ACE3F247
-:10ACD000912D770F9A43FBF5458E4F2C28727FA15B
-:10ACE0005CCEAEEBB59FD273FEE77AA154F41FADF4
-:10ACF000BF4A853D3719E417EE6FA57D06F5A97C9F
-:10AD000050D7ADCFD485E75922DA49BB50EA0B8939
-:10AD1000AFF2098CE179B5BBB2847C1AC28620BE41
-:10AD2000A17FE21305375829D4BF1FF785D78AF1D1
-:10AD3000801EFCA8BFFD3A7300E96BB3D244FAD27F
-:10AD40008CF63F3CB72A3ED20BFF5EE3D7237D4C07
-:10AD5000644D37DD00F526997BAC28B7804EFE3177
-:10AD6000927E5A58306F9FA2A123FA7E36F9ED9851
-:10AD70007424F55AF0F7DC9E99C5BC74CF93E70FA5
-:10AD8000DCEE3AA8F07D26D89F07D1EE7A5B3793A8
-:10AD9000E864262C03EB5539B4F89F9EA92D47DFB4
-:10ADA0000FC5D05A284374487806549C4FF4BD51BF
-:10ADB0001E29F79856EEE5B3AF78DEF896C33F420A
-:10ADC000FF83751D1B89F60E58AAC48FD1F4B027D6
-:10ADD000EB7B8FB7ECC98A116FE9157EE56B58687C
-:10ADE000E533CA407A3B7F689D3E33822E257FBC87
-:10ADF0006CE07913CAEB3CAE35C1CCC604112E25EC
-:10AE0000DCFF28F9E31AA4D39430FD9589F787A4D1
-:10AE10007C19CC0623BD5DD76509EA013F85A2BF39
-:10AE20006B90FE8AC2F689DC77B44C184067F998BB
-:10AE3000170EF64C01D295B44F8A958E163CE7FD5D
-:10AE4000FC4BF7B6E07C23E8EA2D84C35905E88A79
-:10AE5000FC6A03F4ADF67B14DD49FC4B7BBA9C35F0
-:10AE6000D17E676E02D7B3C1EADB49CF82B824BA7C
-:10AE70007B730EA7BB2AE621BA2B675A7AA9346BDB
-:10AE8000CBD1740923EAB474E723BA8BA6D77874BC
-:10AE90003718E94EEADBD42BD3DDE74877DFC58FDF
-:10AEA0003990EE3ECF72C6A7BB687A93F26C9FC50D
-:10AEB00051897675638D42FAA1F89DA12D581E51D6
-:10AEC0009F4F76F6BE6437D9DD8D4DFC7B498F47A9
-:10AED0008F7933056BC5F77C6F25961BD7C177E853
-:10AEE000BAF418CFAB197A0FFF5EB8A1E90DBCBF59
-:10AEF000A0D1CFDBBF7C7A339D870A6C16EDCBDB0C
-:10AF00002AB1DCD8CADB7F8A71AEAB31BF2DD082CB
-:10AF1000EFAFDA96EFE6DB6F6ED74F11EBDDA73CB4
-:10AF2000F706B56BE3ED6E3F6C4E60E427E0F6FA92
-:10AF300064B1CE29BBF83AD33EBE7E860BE86345AA
-:10AF40009F9FECB94F74756524EFE2ECB3CB95B6D7
-:10AF50001C7C4E4739A647BCBB5BF543781C743755
-:10AF60000C717536F7D3C8F821E6295447D817571E
-:10AF700067733B44D64B4F61747E8DFDCC4EFE72A1
-:10AF800019DF0C3EC414D407B8466197C48C774EC1
-:10AF90002F6822BB62FA6019E70CA94B61DCC24B37
-:10AFA0009F4F8BE5472ACBE6F6F329917721DFD730
-:10AFB00004F2754817FB9048E8FCF09077D09EDBD0
-:10AFC00097CC34E7DCF6E5F3F2D4ECBC7F6ECD0130
-:10AFD000F8EA9A54BCF78BE52994B7F2831E164C15
-:10AFE0004A1C38FFE92A0B1A290F8ACF7F658B513B
-:10AFF000DC57C2E5DA3C813F366918D1EF5C81A7A6
-:10B00000EA6CA1178B5931CAA979026F3F343719FD
-:10B01000B8BE6E3344C98F79D9283F1E8E6BCF6B73
-:10B02000BF47C9971A31EE4A61C7AF627DE43FFD61
-:10B0300044D8F1A71EE676FC6AD641FED3DE9F71A6
-:10B040003BBE1E9687F412ED07ADDDAB2DD77768BA
-:10B05000CB0DA0DEB1FFC6AE28B93386FBA57B1FA2
-:10B06000AE2F433F64CDCE77C8FF5D23E54C402B28
-:10B0700067C040E772E6A151E4BFFAD6F2E319D8FF
-:10B08000D59569F24BEFC97646F8775EE4792E0DD7
-:10B090008CFB117AED236FC17D2C8BD24FD172A521
-:10B0A00050C815E9FF90F25BCA9B42C6F514EC77D5
-:10B0B000DFF1609B283BEFE16CA1AFC4FE4DFA4D80
-:10B0C000A47D5488F611D2D7A82622BAB07E72BFCA
-:10B0D0006DD247E8A5052566C47B9119F81BE1A64A
-:10B0E000B78DF5D934F4F168F6E5F783DAEF51F46A
-:10B0F00023F7630B05FDDC84911818FF0F721FB84E
-:10B100008AD3CF5CE63D84F4F3FBD59C7EE4BEF0AD
-:10B110009BEF033DFAC87DA0DC4F7EDDFD603FDD87
-:10B1200058C03E86E7B15CE917E0F1FD4685D3459E
-:10B13000FD9CDF3D56C5C2F2E2683373AB8670B941
-:10B1400065A6C98C7E971603DF2FCD99F57ED9D2DF
-:10B1500008F913B4971F40B8B16E27F977EBADDA51
-:10B1600071362B3D77FD11F7558F5AC9AF74E10841
-:10B170002393E5C2AE11940FFE9981C75BE57C6E07
-:10B180003FBCF7B510D45BB9EE9662CC2FA8550240
-:10B190002FD6C1B70FACBE7791BF6B7541712F67CA
-:10B1A0000FC527E4B8F1FDBA7E92C7C6035C3FF72E
-:10B1B000290994DF0BEF8747C6E9FE3888CBEFDC1F
-:10B1C0004CDF07B81EA9475BFAF327F813B4301B0E
-:10B1D0009412CEA708E74D707FCB5F98E78A79136A
-:10B1E0001B23E204D03E66BEDB7921CF47617201AA
-:10B1F000CC6765BAA717D77F4AC4854F8938E2A9BB
-:10B20000441E57FC7B7F7DFEB40DE27AE894883BB8
-:10B210009E4AD1C69B64BD44F13CD96CF66E346045
-:10B22000BC9E793782FE703D646AA27C95451C5FA6
-:10B23000BD2F256BEE11C81A543E6A10B4FB99D38A
-:10B24000AB1F04E32C6FD39E83EA15F7DBF60ABA33
-:10B25000E9B5F0A71C376B50F5286CD7BB80DFB37E
-:10B26000DA5F9E28CB5EEABFF7BA10C9A3FEF28F61
-:10B2700042E29C3AF793C8F840BCF86174BC30FADB
-:10B280009C6974BC7FB1E43711EF5F24E4D4E26EB3
-:10B290001E6FB8D5CC360F82EFB7756750FCB82655
-:10B2A000D13F5C13EFF75BBF519E87A4CFDEDC9EDE
-:10B2B000FEF8F8CF22E2E3F5223E5A2FD7D7A95D58
-:10B2C000DF6401CFEF313E3E799073607C3C3A9F62
-:10B2D000E245B4330C613CAC7170B855E9EB2AD14E
-:10B2E0004F7C6139A33CF7356F2D6B413FF29A2DAE
-:10B2F000E296556177D70B38C75B97D3AB632E8D3A
-:10B30000BF3E81B922D693E54BD194C9928FC83301
-:10B310001D5493AD699FDB3444537FF0BA519AEFCB
-:10B32000F9FE224DB9A0F51A4DFD616D159AF2880E
-:10B330009DD76BEA17B22149E46F3BA2475F12BB6E
-:10B340002A3047F37DF4DE859AF69FB2A61D93A0BE
-:10B350005EA7457B2F33F37B7AC69485F3A9C77626
-:10B360002CD5F4C3824A50290BDF33F699B8A7795C
-:10B37000790F8F875CDDB55A334EADBE8EF0181D48
-:10B38000EF2D627DE4376E0828EE201B18FF5DD597
-:10B39000D54EEDAE64F7C878C8C64122DE97CDB26F
-:10B3A000395D47D3858DECC30BBBF4E47F2C64C3BC
-:10B3B0001F9A44F032B0806B20FE2E30EE17BBF0A7
-:10B3C0008CDD8D7945B7BFB58CE663CAD4D205DE76
-:10B3D0001F18B95EEB482D5DD8DD5A3A489AA0A5F2
-:10B3E000836878277BB474C142F0BFCBC03B7586BD
-:10B3F000966EFEB7E0DC81F0B586E15B7CD0D3626F
-:10B4000023B8F1BC35699F99843D141DD790764EC1
-:10B410007090B0BB453F322EB159F1935DD51F7787
-:10B420009C10CC0BE6A33DD5C4B85FC97B10E56F7B
-:10B430000CBF24BD8FE79794709D9BC0F5672DF3DB
-:10B4400092FC3E66E1FEA493D5ABC89FB4923591C1
-:10B45000DDFDD99CE9C2EFE8A77A57CA5318909F3F
-:10B4600000F6298BF0D7AE068B1AEF1F8A86A7D27B
-:10B47000AD04ED786E98754B7DE0A3FC150FDEED05
-:10B48000A989FF68ED5FE65122E597B487E5781258
-:10B490009E52AEC9714CAC499F897C1125E7D8C832
-:10B4A000E8F893D69F23FD41328E23E34CD1FE9BD7
-:10B4B00008BBB8558F71D2C1F92D78CEB7D8E1212C
-:10B4C0003F6129EBB905DF4F3077B4A82EE1BFB853
-:10B4D0008AF5FB2FE2EAAB2BC4B56FF22BA147F242
-:10B4E00007C6B3657C1C96FFF11FA1F124C5958B9F
-:10B4F000F398F3F20827D2D340BFA6FBF82BD08FE6
-:10B500005ED7978AF5AA30313D22DEFDA612A2F55C
-:10B51000FC907936459EDB6F601DD36E217F32E84B
-:10B5200049BC27A793FBBB5857B43DAC92BF590702
-:10B530002B41BAAF651171DEFCF0772AEB079665F7
-:10B540001ED295EC89A7F18272CAA3E0F9534CC8C8
-:10B5500041B9FF8CB7CF93F918F27E4F9977549485
-:10B5600023F8751C1B87FD03BF95E594A27F01F8A6
-:10B570005389E4C7FE3C25FA3E801FA3D62FF33142
-:10B58000F4F612F21B2D8B5CEFD78087B45B7E9CA8
-:10B59000C3E8E9C871D1B33EE1C46F3DF8B9A4472F
-:10B5A000933FDA68840D0DFA135E1479811D5ABB3E
-:10B5B000FD961C9D801BDFF75C095EF1F121F2F81E
-:10B5C000043EBEAE1D26F3F8241C970C84FB0A0D26
-:10B5D0005CFBF78FFD705F110BEE122EE74A7B7E4E
-:10B5E00081F8D2DB8FA523BC17A67A5763FDDCE375
-:10B5F000A14F145D785E55FAB394877BA14B4FE75A
-:10B60000FF1AAEE372B0E1253D8986F3DD268AB3E9
-:10B61000D674BD4176E1D96610B406FCBD0C187233
-:10B62000D865FC0851F08EB74F92EBD99023F6E520
-:10B6300062FD32EF07D6B93927665E473F1CB4DF9B
-:10B64000051CAAF46392F01C597FBE92DA97177911
-:10B650005F5FF43A2A7278FEDB29B3F73EECEFC362
-:10B660009E9C1DD85F95BEFB7036C267AD42E7BB9E
-:10B67000A698F879DC2C715E6F42A8C98DE79933E2
-:10B6800073F87D66237EA4F7621CF9FDB577A6E00A
-:10B690003934D9FF084547E747197BEE837F2CC132
-:10B6A000F8E62237DE6FBFD824EE2FBACB1A2C0073
-:10B6B00039F2BA91DF476518D244E766FA92F5E4A9
-:10B6C000D74CD3B3A9487772DEF2BCAD7C8FF701BB
-:10B6D000605EB17C3FA5A5AF780DFA7B043DC875CF
-:10B6E0004FA9EC2B6EB285E12FF33CA3E15325F873
-:10B6F00043EE431BF05E5BD0BFE7CDBC1C7DAF6D5E
-:10B70000FFFE7458FF3D36F6C8B87E83C593341EDD
-:10B71000F951DC6BFB17872789DF77A4BDA7F6BC3F
-:10B72000C8B797BF5312EFDE9BFFCC51BE977B8209
-:10B73000E2E585CBBCFF7870694856997A359D73F0
-:10B74000F75EAEDE2BFFAD8FB9DFBE28BEF7DFD3CD
-:10B75000F96AECBCC55EB1CE707E6188CE29F7E790
-:10B760002DBE547ED97B471AF03ED20838C8BCF6AD
-:10B7700006BC8FB43846BFD09FCB76E57B87AAC482
-:10B78000BC1A308F3035F23DA7B7F03869222F3020
-:10B7900094887CFBCB2E3D9DE3FFE511DD8CDD31F4
-:10B7A000E69D9BCBE132CAA9121F8D0EF2FBB5E3D9
-:10B7B000D593E779E4B9D8E8F97556846EC5F9638D
-:10B7C0009E72ACF11CB97C3F2BE7DD99C2F1D1F040
-:10B7D0009A89DF9BAAF27CF2CE94D04AE2138716B4
-:10B7E000CFC3041E3BAF0FE5D1B9B299DCEF108F88
-:10B7F0001E26A7FACA51BEC87BEECAD426C511C1FF
-:10B800008F57A28730DCF51ABC0E84BB91BECB7E6D
-:10B810004F1F157CCB3C36DCCF2D11FA6EC99E5ADA
-:10B82000B287E57EE9F44E3DE56F9C663CAE72BAA8
-:10B830004DA1FDD0521F63EB402EAD7CA27833AA00
-:10B84000AE2599B09614FE1E7F1F66E9C6A8F8BA09
-:10B85000D85F49BD2AC75FBE4D6B17D7B06D7F4615
-:10B86000FBE9F4512E3F56B026D23F2B1FD0F6579E
-:10B87000B367D6A738CFE8BC8011C28F372D57ECFD
-:10B8800057CA5819EA8F354F7C6EC49F6089C71715
-:10B89000F8FB4F4387F1DF7DC227FE8E083E6FC95C
-:10B8A000F5FC2017FD3EEFF2F9AECEF5CDC9457F90
-:10B8B000C9BB7C7E17EA2E703DB32B8DF45B8BFDEC
-:10B8C0002E92FFFAC15CFEDF8BF735009C4C26718F
-:10B8D0006FBAAE499F48F64D80E8EC43E71D737E92
-:10B8E00040657726F243DAD3D36760BFCEA7AD1E9B
-:10B8F0005CDFD6724F21FA2FB656F3F3A166138F91
-:10B90000DF077E39F100865386766CAF40179DA322
-:10B910007B7F10FD42ADBA3F1FC6BC98D6C93C5FC5
-:10B92000325D17DA3F28623CA7359089F17DE768E0
-:10B930007E6F4E9ABEBC90CB7F6E2736085C5CE86B
-:10B940002A207F62AF41FA173B2C742EAB8EFF2E5C
-:10B95000C628C6F12FF3EA700E9176F1D966A6F9E2
-:10B960009D86511D4AD09048F7A8503CA86E4330A0
-:10B97000FD16D4674FA9144F93F34B7B3DAB02E305
-:10B9800066528FDDA238B8BF4DD8FD0B98FCE3712D
-:10B99000B7F9829E16087BFF162B87F752E6CEC3B7
-:10B9A000760BCD2C5107AC764B654729ADB3D690BD
-:10B9B0008C76858C1FC5B74762FBC91A7E61E7E7A5
-:10B9C0009E95BEE1D8C919F4415D863FDB853C698F
-:10B9D00018CECFFFB1A1CC83F1CA86D746D0EF30C5
-:10B9E0009912783C1CE49619EF113A84FA1ED6BDE0
-:10B9F000EA158BC85B0A8873CDFCDED8C639394599
-:10BA0000741EF1781FDDFF71DE10CA23FE067984F3
-:10BA100037A6BE92FBBB1FE0BDEB0DD960D741F945
-:10BA200074EE9F7879486825DE1B9992778997474D
-:10BA3000853EC1724E5EC26C2A178556EAA13C3E15
-:10BA40002F939771030A0436356FF06C3FDA2DC9D6
-:10BA5000C22E7087E8BC77C3CB237491FE58771E43
-:10BA6000976767843FF94C3EBB6D0EC27B64ECFA6E
-:10BA70006979D2DE6EA3F5C9F5CAF62C3376BBFF21
-:10BA800010727E9538A73DC5CA5A2D3CFEE74F047B
-:10BA90003C1CEC1E41F1CB7FCD4DE1FD3B42744F90
-:10BAA0008FEC27FA771CE4B8AB15FE7B59E7A3F2BD
-:10BAB000BC7E97CBE52B8CB391C619EAE1E79BE7F7
-:10BAC000E41422FE006FAAC09BCAF7C9ED7C7ED0A9
-:10BAD0002FFEFE13E88762F4FB1FFC0AEAE787E704
-:10BAE0001D4D2727C538AB5A78DCB62FB980E869D9
-:10BAF0008A55DCF752A25DC7F83C6E9FBAF392C537
-:10BB0000791D09AF0C85C6691170CC090D9F33F6FC
-:10BB10009BAFFBAFFF4BEB8EC09707EF6D39D8C5DE
-:10BB2000EF371E9FC7F185F49C4276E0764D7F6724
-:10BB3000D647B59FC0285FAE21A580DADF2BEE6F18
-:10BB400095F7D961BBFC71DCBE45BB57DEA7C1FCD4
-:10BB50009359641CB2FFDE8C0E71BF70FF3A6F28E0
-:10BB600011EB7488753A22EF33ECE7CF637D79737C
-:10BB7000ED03E9B81FFEFDFD8D2912FD69F83C5665
-:10BB80007FC8D7F1F072551E9727DF1B5EE43CA3F8
-:10BB9000E0D90FE7A8F94978227F53BB315ABA940C
-:10BBA000F3CC11F43980BFF3BFE578E27ED9FABB5C
-:10BBB00079BE387369E9BABE335F87F909B2DD0728
-:10BBC00078C0A034EC27BC214FEC2773584E9CBCA6
-:10BBD000476F9E33A67F91DE47EF277B93E5EFD932
-:10BBE00069FD1ABD4EFE7B39FE73FC7E836BA3FCA0
-:10BBF0003C188F7ACE166E17D62FDAF263027E03C8
-:10BC0000FD547D7938BF1253C5F3F83B5BABF34A63
-:10BC100067AB6077942455DC990FE5A6C7C693FC03
-:10BC20002E1954F1793EC8F3358F4DE0DF47577C2C
-:10BC30003E04CB791379798AE77994F760B4CC9E86
-:10BC40009A15B62BEECC73D1B8FA4A1DDD6B67425C
-:10BC50002306D6637ADD44F98012AEF19E25265D77
-:10BC600053ACF3BFF7F4D3038FBF4CC07FBAD01FE0
-:10BC700028FC052155E32FE84DE4E7CF7B5FFD92DB
-:10BC8000CED7DC9BE75B9F07ED1BAD676FCD87F2DF
-:10BC900006EB0714EF533C6087A01FC6E5608B607E
-:10BCA000BECAD9AD5EB49FD86AB75925B80AFF1885
-:10BCB000DEA907F07BE5B5A77E3C880FE3C5794C8C
-:10BCC0001472A0F1B5BFFD15E3C48D676C6E341B13
-:10BCD00027763F7C27DA5F13BBDFFE1BD7C3FC3C14
-:10BCE000909CF744F47FC2FB095D269AFFC4EEAB3B
-:10BCF0005660FD6BDFEB2E403AB9EE44B005C5420D
-:10BD0000EFABFF3E48730E887D7AD97CD1B8F1390C
-:10BD1000098F3F01A093081E3FE7F0F88AF2D9CEC1
-:10BD20003B8F6E0E9193547BDE0AEC788A3B5F600A
-:10BD3000096E8C7BC873FDD17ED5E3D5B03E787F8C
-:10BD40005D1FCC20C29E9E72D10C82245C2E67C9DE
-:10BD50009A72A5394B53BFCA91AFF93E3DF32ACD34
-:10BD6000F799AE424D79D6C8899AFA37BACB35E5FC
-:10BD7000D913666AEA577BAA35E5C26087A67EF1C9
-:10BD8000912EEDF7634C8F78283AEE7E039FA5271E
-:10BD90003DE49E2D3BD5F4063E27FE858323DAAF96
-:10BDA0007CCDC58E37F0BDF42B479F9F927EE69BDE
-:10BDB000F5B68031B63F39532D08DF83A0D7F1F3B4
-:10BDC00053EF25FBFE807893E7A7A6A05F1990505C
-:10BDD00075DBB99FE2EF325C58C4FD6EC711319438
-:10BDE0004F6E277FE57143D3B37FE47903B928F71A
-:10BDF000AEEB9BAF59F7948B3ECDBACBD9AA283C7A
-:10BE0000DDA1295739EED6D49F9EB95EF37DA66B8E
-:10BE10004B149EB66BCA37BA1F8EC2537B149E9EBC
-:10BE2000D27C97F4DD2DFC5FAFA1DF0A9E93423DEB
-:10BE3000958887C9A7FA081F137ADA2A114FD71CE9
-:10BE4000EF207C9504BD95282ECB8E34BD81CF206C
-:10BE5000ECCBB0DD81E64C7A1E6C7691FFEB70F393
-:10BE6000487A1E6976D3FBFF689E40CF5F357BE83A
-:10BE7000F99FCD33E8D9D3ECA567477307D57FAEDB
-:10BE8000B98BFBCF52FBEFDDC845BFC1795DA8017F
-:10BE900023C68EC15B499E9E4F089DC7F2067FEB6D
-:10BEA000ECA92034F0671D902F7F209E452E4FFB7C
-:10BEB00060780E1ECCF8FD19227FA343E729443B8E
-:10BEC0007CF4E30FDEA7E632B669BD37137F3A187C
-:10BED000CB662813B2E9F7901EBCCF93C3D8B3A8A2
-:10BEE0004AE8BEF7076763B957FC9EE7E0C71F241F
-:10BEF0003BFC5BC7D93D03E2ECA307C788B33F7B9C
-:10BF0000CA65477FCFD1AF46D8111E4785DFCBC367
-:10BF10000A0DF83B1CE56AA101F5ECF138E7215464
-:10BF20005379C9E0525CB77B1EE5915F6FA0DFE1FA
-:10BF30009BA3F0FDAFAC97ECE2FAA0F74613EDA798
-:10BF40008EE93C2B903F7A95BEC710CE373DFE144C
-:10BF5000E9A95E7B5F1EC2AFFAF1BDBCECEC7B4C85
-:10BF60007147940D1C3E958F3F39DB6FFB5EE133CB
-:10BF70001BD7110D9FB9831D7C5F11F4E4A21D2016
-:10BF8000CBC7AA3DF514572CF70CC3751CF59A388E
-:10BF9000FF7AED8161E437F294CE8BF0FFF40C363A
-:10BFA000D0FAE7A2DE443FE8427D20D6EF159E1F7F
-:10BFB000CCED3DA213DC672EB0D2BEE0988EDFA39D
-:10BFC000105DDFEEE2FBA3CFE2DC879C28BE57DCEE
-:10BFD00054FFEC0BD05FEF5A0B75DDEB1D41F658AB
-:10BFE0006F13401768BAF754D339FEDDE41620A169
-:10BFF00038EF2DF82FF8FE6CF79D5FFC06EA7FB056
-:10C00000D6EA261DE21845F05B282A2F4E3593FD0F
-:10C01000B4784E6E05EAC55B44BCF056BB9A4E61DF
-:10C020004335D9E8807E96DB0A370304D9CAB46A5F
-:10C0300023FE64534DCE1D9BF1B97AE87623F25866
-:10C04000DD987D9BD18CAD07162E25F9177AA7199F
-:10C05000E675DB3ABD8BEFE7E4F9DADA6F94F722A5
-:10C06000E9F798C84F0220D07E35C9A568F649493E
-:10C07000824E1F182CE23163D9D84BDA78D74EE4C0
-:10C08000A3B38BDF191E271EA1FD2EECC7DF8A7B11
-:10C090009EA3EF4F91E33A5C7CFF75CC089489F640
-:10C0A000E442AE07C6CDFF7C4329AC7F5CB7434773
-:10C0B000790DB7D5BF8078B8D025F068605DC84FDE
-:10C0C00037F9977CF01B424C9AE6DCF095F4A5BB5F
-:10C0D000C75119A92F4B42DECA487D39A1AFAD1215
-:10C0E000F5A2D48FC1E61A218F9B488E1E6C5E4745
-:10C0F000E5C3CD7E7A1E696E15F2B88DBEFFAA79B2
-:10C10000A790C701218FF7D2FBEEE6F9F47CADD9F9
-:10C1100047CF85A9BED7116E328E3BD7ECA3BCDCCE
-:10C12000430F9B18C6F12E749B288F0338E2B1474A
-:10C13000D2304FC944E744A3F395A2E57C3F3D7458
-:10C140000EB8B7E56DE4F7FE3C23B41707C7A7A701
-:10C15000A3CC6547B9F4F1E0F324878EBA5C76B4DA
-:10C16000A74F3E2ECA1E97DD00E53F0DEE25FD715F
-:10C17000D4E7B29BA0FCC9E3BDFCBBDF65B740F9C7
-:10C18000D3C17DFC7B8051D0FFECE02F488E9533EE
-:10C19000E520F247A5397F2AA80BD0D7E507912FD4
-:10C1A000A6672E998A7CB160B08BE872A66BFD41C0
-:10C1B0002CCF1AD9AEE215151E5BE1466C5791568D
-:10C1C000AD62BBA939776CC476D3866E5723DBCDBD
-:10C1D00018B36F23966F70B7AB689F2E4039561A0D
-:10C1E000EE4796E57729A7653EDDD5DD5ED207E30C
-:10C1F000BABCA40F245C2AE6566F42FF676397E23D
-:10C20000C0DFA5A998ABF4273360EE6203DE930A82
-:10C21000F2FAFF3DAE77AC87753662F91A2AB7ADF0
-:10C22000FF06FAED7F00F6E231E800800000000032
-:10C230001F8B08000000000000FFD53C097854E582
-:10C24000B5E7CE9D2D64924C360842E2649924965F
-:10C250002C43B6261064480CEE3001F944651910E1
-:10C26000C2164804EB17AB7E191A17E0698D6BD123
-:10C27000AA6FC4B5AFB6E461D458091DAA52D287DB
-:10C280003A5510B47974A488F0999011DC78D2C72B
-:10C290003BE7FCF766E6CE248014FDBE078693FFDD
-:10C2A000FEFBD9CFF9FF5F008053F8B3027F603403
-:10C2B000FE38253D8C046804F167BFD16DB295034B
-:10C2C000AC34078CA0A32F41A3AB1060AF0E9676C1
-:10C2D0001400A424C3FC7A0B968DB0740B96E75D12
-:10C2E0006803480568DABA206E8185DABBE36660C8
-:10C2F000FB4517E2AF38CE52056E54E0930AD49B4B
-:10C300009C89344F9A4DD21FCAC76F8550784A0610
-:10C31000E8B79A3DBA048044937BAC0DC7ED9BFB14
-:10C320004E835887AF88D6316CBD1EEBE300326C6C
-:10C33000561E1FCA8219545E09ED46C846B8F5CF8D
-:10C34000FBA422DA97C52723844E435F205FECF9D4
-:10C350005416FE63063D54E07AE9036E6999D7707E
-:10C36000206056EAF1673974EC706622DE5ED47E96
-:10C370006F04BF18BF43FB7D15E28DBE377569BFE3
-:10C3800003545B0F8D433002CBB8DFD912FE5E85BC
-:10C39000FF0D8F874967C0C3A4A1F010B51FF01A25
-:10C3A000418EDED70ACB6EA673E4BEC09DCAFCD117
-:10C3B000088121F7A7F245F4FEDA05FEF502FF2514
-:10C3C00036E7745A5FDDFC389053008E6D35794D39
-:10C3D00099DCFFA93D2944179375832D9A3E5B5B39
-:10C3E0006783DE00B0ADD5CDD0D7BA14F476803FE8
-:10C3F000B53673F9ADD6162EEF68F530DCD9BA8EA6
-:10C40000E15F5ADBB97E57EB462EBFDBEA65E86F8A
-:10C410007D91BF5F3B7F6586DB124DFFD5C9CE4561
-:10C42000C48F9E7BAA13993EB8F753C8AB9E1AC817
-:10C430006FB644C30183659D94C0658F11F7E1D940
-:10C4400016E36DC37DFD738CBB89C619A8097EAD4B
-:10C45000437C434A80F1D030D2BD9ABE4B461C3A51
-:10C460008966F5E412FE0EEB3CBF0764D9569BD3F8
-:10C47000A5473E381A8F551700DC82650FCEF3783A
-:10C48000AAAB85FA417EC048E39CA23F93717C0928
-:10C490006677F03A10A21C0EC408E8B1492C8FD17F
-:10C4A00050C8DD40BA9FF960E0E91319B68233CB7A
-:10C4B000C570F8A893AB039E32A46765ACC384D55E
-:10C4C0007D12F8A412845346D6008ED3976ED413EF
-:10C4D0009C14445650C7C39FC9DF226386F1CB1416
-:10C4E00048D4946BCDA335EDEBAC999AFABEF45CCD
-:10C4F0001EFFD2B48B34EDFA46579AC5BC532F2396
-:10C50000D865746F5C80740956991C9BB0FEBD9809
-:10C51000F822280698161BBF89E07B31195E6A371E
-:10C52000EDC0C914C07D4E937D238B105597DBC69B
-:10C530006BC7ED995363C37657E65769D721C12579
-:10C54000B4DFAB1D5334DFA7575EAEE9EF32FB9388
-:10C5500008ADF5CE7ACDF7C696AF419F0C30B1E568
-:10C5600024E84B01C6FB3A34E394EEECD2B41FBF8F
-:10C570001B6412EB927D8E3709961F74CAC42A156C
-:10C58000879BDF2458F5A53F83F6014EB059519F94
-:10C590004B8ADC8347023D962729E5CAA0B72D8147
-:10C5A000E87012F2F548BF8930C2216363A9F2BF77
-:10C5B0004E101F4C5220003207F6AB164B80793AD2
-:10C5C0008BD798456A05E51BF5C106C991A6473882
-:10C5D000470E5450F928048A08CA3A979EF86B2AE5
-:10C5E000348FA5B209DC69043F4874BF4F7CDC2F4F
-:10C5F00005DAC4E282C9C4CF753FFF68DE6DAC17AF
-:10C60000621C265CDFEFBAFE914A6BFDBB3FF591E1
-:10C61000376C217E6FB27ECD7852CB8D2DC7197FBE
-:10C620006AB96F2DCC77E192DB0D689F1036FEAFB3
-:10C63000CC760AEDDA3AA25323FCC9B8BA20D41E4C
-:10C640003ABE18C47731EABF7A5AD304C2D7DF5D45
-:10C650004E6C576F1072089E45F54E1CA73E46293A
-:10C66000834FD4A72AEDA1B29ECBE96A7D95686F6E
-:10C6700057C77B58B41FAD9695F12E52CBCDA29CD7
-:10C68000A9CEF7A02817AAE5FF7071394EB43F6113
-:10C690009B55EF2908E9FF53AADD180FE3C96EA0E7
-:10C6A0003D9033C91E48BB1A981FA2ED85B65EB1F6
-:10C6B00017F37F237B8CC5448FCB63DF21B9EE90CA
-:10C6C00080E4BAF17683D38BF37F9ED451B4C61243
-:10C6D000C2DFE7B7087CBB6AE39C32B65FF96ADE6B
-:10C6E00026E223396EF7C885F8DD3A56C77AA74E99
-:10C6F000B63881E87BAFD0FB6AFF48D8D0F2868697
-:10C700009E51F5B2C4F3C16CFCC1F9FAEF1BF5F40C
-:10C7100006C2598E3F9770939929F4DC48D4AD95A1
-:10C72000F8F336EA5933D23D251B9C3A6C9FF21A36
-:10C73000EA67A2F141BFD0C7AFC5F824149C958F1A
-:10C74000BDC9F66FA18C528EF87B2DCF9D97897C49
-:10C750007A34CE9F4B7CDBD0B28DD7758DDDCAE3AA
-:10C76000833558108ECFE2CC28FC979E01FFA53F61
-:10C7700026FE718203A4CF752874B4BEE596B778FF
-:10C78000BFCB95EFAC5F3243EDB82C47978FC639DE
-:10C7900032081F0E854E0774B60A055F5713BEFA9E
-:10C7A00017FB7313B1ECF0F947BAD93EEC2A97881E
-:10C7B000EECD7140743F2AF98BF60E41FF8ED60EF6
-:10C7C000B6CB5B5ABB18BE8473D0BA557CDD108DD6
-:10C7D000DFF967C0EFFC1F13BFA3F401A303FBAD98
-:10C7E000DA073C4E85FF8011C2F44C2BF125E2277D
-:10C7F000A14BE2FA3AB92021A0A98F13FE528E7301
-:10C800003CF1E9CA19BBAA37482179981C0B1D31A4
-:10C8100049CCD70E85AF1DC4D72AFF223F96EA1117
-:10C82000CF6F9DC47E43E037C4BFC0F3A878BA3B46
-:10C830001AAF1B888EA7C1ABB6FE07C66B27FAC717
-:10C84000A43782AFC478376546E3F9770A5E557C32
-:10C850006F53E47F383C6F233CA79E7F3C6FCBB483
-:10C86000F1B891F81ECE3E45D2475DF710725A7E60
-:10C870002E723A2DDBAAF8DFE8771646D3FD6DA2BB
-:10C88000BB5943F79E33C853CF8F294F91788B8480
-:10C890008D12B83A2CD1DF3FCB1C56DF9D173C4E92
-:10C8A0000ACED6F86793BF756BFCB329186169FD92
-:10C8B000D89B34E53AEBAD9AF697A6ADD5D45F6E2A
-:10C8C0005BAFA9BF32FF014DF96AC763117EE6D3A2
-:10C8D0009AFA7AE76F34F5739BB76BEAE7B7F468B7
-:10C8E000EA1778FEAA29AB78DCDA0A1C2F6D6B35C3
-:10C8F0002BF1D3650CAB03FE5A12838B0F07D9DFE4
-:10C90000ACF4B7D7B24BB2AF83FDD1329FAB96C276
-:10C91000AA8A9DCD6F12F4B55A95782D8DE15BAD45
-:10C9200036D6EF3B5AF319EE6C7528F15A25C35DE4
-:10C93000AD4E254E73318CB40BAF66BBA764213D61
-:10C94000A6BDBC4407B880E97FF867C15E5ABC77D2
-:10C95000BC8EE2DC35CA5E8E577FB3FF36E4AFE3B0
-:10C96000CD2607957BB71F31D80AA3F965EEB732FC
-:10C9700038C3F86C6ECB5F0DE467CD450FBA630822
-:10C98000399D9AA5637E20F703502FCC368321056D
-:10C99000F5C1ECD992A30DF8BB079218FADC583F09
-:10C9A0004D0F3E1396EB2D7A9F299E97E632A33FBB
-:10C9B0003D4B2C134C7AF0503DA424739C7E0D7D8E
-:10C9C000B4A13C3865B818BFCF223F1CFB5D6FE9AE
-:10C9D0003090DDBD6EE72FFA6FC37AB8D353CEF136
-:10C9E0003D5C6225FD2D793ED69D1A37BCBC2035B5
-:10C9F000E150185F4F25194EA5F8D1E17752DC7A46
-:10CA000093C1F19C2DBADF05CA7EA7C912FB6FC185
-:10CA1000D74DDE4D52483E717F3B4DB8CF26E201E7
-:10CA2000DA67B3C19757447EF676F6B39B2AD716DA
-:10CA3000119D9A2E913E311585E29DA6962FD98F94
-:10CA40008FD4CF91F04CF190C36F65FEDBDFBA93CA
-:10CA5000F9458D8B7A5B7D5C2E0BB86AC3E3A339F5
-:10CA600093FF4DA6B8A7EA4B11FF4C3CE9DCFB5302
-:10CA7000DC77A0D5FF2FE517D4BC829A6788CC5B02
-:10CA8000A87A64DEAD75096EDCEF9A2C5106F3943A
-:10CA900074A6A35E4055DFDE9A156597EFC83ABDD0
-:10CAA0007ED6D6FFC0FAF96CF9BF314DD8D548BE55
-:10CAB000DF37E30503AD53E5EF48FE9F437D70FE8E
-:10CAC000394D92D7837A7AF69276C344E9DCF97DC0
-:10CAD000B9E5A0888B23EDC2F7B60736A69B5C2B81
-:10CAE000737C61926F72501E44A5434734DD3ACF88
-:10CAF00040B7CE1F936ED176F1E0BC73B38BA0F13B
-:10CB0000CFDFCB8AF2273EC83ABD1FA9ADFF81F720
-:10CB10006D1D6B63B87244EF3C5927EA457C620196
-:10CB20001DF2EF8057E6B87469667B3CC533501937
-:10CB30008C277DB7AC5B06F20F41EFD48F46FE5CCD
-:10CB4000A2F0671FF83E247E5C05F77E4109982518
-:10CB5000D54BAE223DB7F40943084FFCAF93F32702
-:10CB6000AB947ECB2D9D46DAEFF267B5EDD4711A0A
-:10CB70005F8AC81F575FFA19B0DDF073DE6F55A7E3
-:10CB8000B6DF77597129876259164B08EF67D2A72C
-:10CB900047C9AE1BC2CA275B39BF203FF3E0039EE3
-:10CBA000B121FAC46447F1715CF6E9F9585BFF23DF
-:10CBB000F3B11CF7AC91E8F97DF978BFDD9945EB4D
-:10CBC00056F5F3A0DE79C3C47A67A0DC26F2A43759
-:10CBD000FDAE2D9EF8E40438881D162AF9D2856A28
-:10CBE000BE749D365F3AB9CFC779B94907BD6D713B
-:10CBF00048F789BD1ECEDB55ED76B759B0FCD35D45
-:10CC00004E99FCA3F16FB9645AB7EADFA8FE4E480B
-:10CC10008FE5B0BEE3BC6BF6D9EB3BD52EAAF63060
-:10CC2000D20E5606DB6BC9FE4DF8B6E34D82E72BFC
-:10CC3000AF1E69F7DE8B137AE2A8C157BE97FC8C52
-:10CC4000D7631CCF41F4FAAFCB167EC64CCF02039C
-:10CC5000CB1F091FCADB0C456EAE4F765F974DF5B3
-:10CC60008ABDD0999D06B2A37572DF23D7125FF9F2
-:10CC700065CE1BDE7CC707BFFFB5EDCCF98526EB83
-:10CC800071F63F868B339A74E0A6F8A2A4D6564A72
-:10CC90007E0CC56D944754F38A91ED9FB0D7ACC814
-:10CCA000E63C57B5DF49EBD928D6331CBD9A5ABEAE
-:10CCB000D0E431879BBFA9BBDCBA304C3E5ECA16BC
-:10CCC000F12ED2DB7AC81CA2F7D9F2C5FFB7F865FE
-:10CCD0009A0C1E09ED6CA1E415FE2F083F780EF8A2
-:10CCE00019CE8320433758F97C6A2138182E021751
-:10CCF000C37CBBDB4B7C3360088E24BEEA7FF5BB74
-:10CD000002E29BFE8B27B657C1F93B5F8AF4FF0610
-:10CD1000C6DB78FE8157BEDB43FC397087E1ACF49B
-:10CD2000C6EA646727F151E479CBBB53643ED7016F
-:10CD3000FD7A968B7AABE80397A4721BEBD84CE68E
-:10CD40008B90DE1CF5B4AA371760BFC24F74ACD706
-:10CD50006099E4B563D3AE808E45AC7071A657A6DA
-:10CD600072A7A82F5C99E895B05C581523EA6F4A22
-:10CD7000F44226C5430196CBF900AC0F1780D08B47
-:10CD8000378293F78991419684FD176F3597703EEE
-:10CD9000160239A4FF8B288E1A224EB7E608792F87
-:10CDA000CE12FABEB8469B17F9305BC91BDB6B4A43
-:10CDB000721056E738F7121D8B93FC1B1E2AA37CBA
-:10CDC000900E36A17C7D56752B9F77AAFD1AED3506
-:10CDD000BD84BFCD1270BCE2E936799F13E78C2386
-:10CDE000C3CFCDF2EDB507A8DD115A7BF9F078C5B8
-:10CDF0007E1CF747CB9587D7574CB11BE7FBF14318
-:10CE000025CFCBE5FF79E6EBFA3B0BF84CC1437E2F
-:10CE100072A3DD7D9CD76F04B0D0FA9F14711440CB
-:10CE20007306E547973C65D2919FF1119A63C80359
-:10CE3000F81BC6DD04FF1BE367827FC7F899E02774
-:10CE4000183F13FC07C6CF04177F3B1E8322808D3B
-:10CE5000394E4B4E79E81C3072BD861C81CFC1F92A
-:10CE6000BB8D3C7F9DDDCDF81DA4F7EBE0A573994C
-:10CE7000CD89C10B924EC36F03DDDFF0F9E9707805
-:10CE800051CF2523EBBF53E85AD4A967FB5FD415D4
-:10CE9000886F086B77418E91EB0B5F39184FE31F5A
-:10CEA000B50EE2D729E196A7E944F982672D330848
-:10CEB000BF75766709ED1BE53C83F651D4F5C18358
-:10CEC00013CB787CAB64A375041FE5B821621F9176
-:10CED0007850F7B539D1BF81FA6F7E258B76827A8B
-:10CEE0000784DC101F4943ED772DF3CF7453B0CC8A
-:10CEF0008AEB9D7E4A6E1E0AFF75F6298CE77754F1
-:10CF00007E53CFC715FE52E976AEF21D391E906BE7
-:10CF1000847EE76AD2A536B24B27E3C92FAC57EE21
-:10CF2000197475E6BC47FBF4EC94C16E633ED6C839
-:10CF3000DF62855F5458D86D7411BD36771FCA59AA
-:10CF40006461FAE42CC6F6B372EC9ABC6761D589C9
-:10CF5000C71F4AE1F6569AEA3A78BACE8AE3DF600A
-:10CF6000DEFE366D69AEF593BA442CCF4F93761042
-:10CF70005C60CB9C9A64A3E57A79FD37E64FD94192
-:10CF8000227595A39EFDB929A464C2EC43AD3996E0
-:10CF90000E1F07CB75D6644DF9D2B4319AF697DBE4
-:10CFA000B235F557E68FD3D4ABF35EE528D5B42B75
-:10CFB0004E0A66515C87FB60B980E764AF5DA27D75
-:10CFC000EFBE621C96A73D3FCB416ECA66A57EDAD6
-:10CFD000965A2FD16300F1694487EA70E5FA471F3A
-:10CFE000A2C122E286C6EE6776386DE710370C13D1
-:10CFF0002FAC00718E3F5CDC10192FA0FE7C90F4EA
-:10D0000067F1ABD758DB70DCCD55272EB0E13EEF92
-:10D01000CCC13882EC8D12470CC73F837222D904F1
-:10D02000FFF4C8F0DC10FC03F00B851F059CF63EF6
-:10D03000FA3305DF5FBF7D4AFA8DF3071EC5EF5750
-:10D040006044BEAFD8E8786F0DE5A7DE9181CEF9D8
-:10D05000E124AE03EB1BE87739C4F7B0E8E9BB463F
-:10D06000A7F0770FB9A6AB94FCDF1F7314BFAA71AA
-:10D07000FB5DA3CB42F570F3279AF670BB74B7A69D
-:10D080007C67A6B67CEF94BBC3FB0FE797356C5C5F
-:10D090006074A39C363C2C39BD43E88BC1F5A428B1
-:10D0A000FAA17B09EBDB43DB97196D71D1ED57E1F9
-:10D0B0007894B76C18C6DEAA7AEA3A199A87AA7FDA
-:10D0C000479DCF717EE7FB08714FF6CDF39AB0C351
-:10D0D0001F25B88DE17CB22F479C7BF43FF6C01D25
-:10D0E0005FD379EEEB22BEEA4F14F6A3A8F3339D8B
-:10D0F0000E61F108C15F45D6808EECD2C0D2580FC8
-:10D10000A09C352D8BF3E88AC98F087E681E4F5E80
-:10D11000C72D0F9A91CE1FEB741ABB3C40C11696D7
-:10D12000FB9EFDD98C3BE9F702712FE97CEDB32F13
-:10D1300007847DAD117A631EF19F62B7005556D307
-:10D140005D3068C748CF105EA89C6BBFF5FD87C9EE
-:10D15000CFEF117A83F20A37B05FE0B468F30D1DA8
-:10D160002CE7F8BB2DFC3ED759EB8FB7DA8D96F341
-:10D17000A84746D8B5798721F4C5FB57223D9B5E69
-:10D1800097F95ED0B1ADF60408D31F91786CDA2818
-:10D19000B39CABE5A35BE5CBBC6C0F8319F585D1E4
-:10D1A000F806A783E57FB555CCB77AD23733C84E9A
-:10D1B000AFEED68B4B2FC3CDB34E065BD83C9BB79F
-:10D1C0009996925D53D73F6055F449F75749530AF2
-:10D1D000045C3B847D45BFC090427E41BDC4F1EC00
-:10D1E0009EEE513584A73D12F86C253CC435665C33
-:10D1F000DF4C311C7DB7505E14D2F2F99EA51AD7D0
-:10D20000AAF1ECACEE5976F2633FEC5CB807290763
-:10D2100093ECD9CC4FD78287FDEE3D89AE74CA938B
-:10D220004C53EE3FEC490CF691BFBD6752AC44F74E
-:10D230001970FC3B697C755F7B0CAEF466DE9792DF
-:10D240002F75FE443E157BF671A2AA67EBE4DBA7BF
-:10D250005C49E7F773C04AF1EC7459F8D5F04721FF
-:10D26000CFAA5E6D92FC496CAAED33A6DB114FA3E9
-:10D270005A7EA9E47DDB35F700CFD6AF1E8CA35FC5
-:10D2800094987F563944BCB1AAFAF347AEC5F95712
-:10D2900061BC4FFEDDC2AEEDFB087F91F1FD607C0D
-:10D2A000F52FE67BA3E333D732DADFCD771CDF73CC
-:10D2B0002D44C769837181EA5F3E17CBE7D6A85832
-:10D2C000857C28FC7A645BEEDE35587FE42F0666A9
-:10D2D000D73727FDEAE8AD58BEF9B958C6F391240F
-:10D2E000F0901D39B229CFEBC1064B74C15EB26F0D
-:10D2F000B0258ECF693E7B32EFB72F517EF2B776E5
-:10D30000F643487E6CE8C27C46F78FE8FBCBA3B9B6
-:10D310001FB8C5BC0D8A5CCA2F14DE5F4DF52F24E3
-:10D32000737E42A5DFE127639C14AC7D05BE222BF2
-:10D33000B2DEE792E710DD5B5CA17B69BF847CF91C
-:10D34000D508F706DAF7F2C7FFF3C389B89FDA17F3
-:10D35000AEFE5515AE6FD907A940E384E83AB4DFB5
-:10D36000706C6BB6907F053F2B5E8CF11E0CD32743
-:10D370002B3B1235E5A6AED1DE83617A68F09E7252
-:10D38000A3C4E7048D8A5CED37BADBED94D7A5FB27
-:10D39000A94C3F711FB584CEAB08FFF79918FF91D8
-:10D3A0007CF6A25D396756F33CC9604E23B9750B14
-:10D3B000FC0DDC97B789E2319F3D49F13B82B933DF
-:10D3C0000AC3F9B377D51B9CE731897B8F31439F23
-:10D3D000EB77DA13B97D83F94B4D9E6955CB094D37
-:10D3E000FE675501B01F50D2662BBD89CE8714BA97
-:10D3F000DC9FEE7A8DF1DEF1C0ABBB189F4FDCF203
-:10D4000031CDBBD3C2F4835D4A3C16116F3598BF52
-:10D4100050E4EF698D7F7EE8B1BD4594FF38F4CAD2
-:10D42000B822CAD32E94FD877E9DC9F79CF6DF866D
-:10D4300070CBCEF7392F1EB9DEA87B0C92D0438D6E
-:10D44000B48F64BAFFE37AC7CE722EF4C3810D8520
-:10D450008C3F351F3D7064E878505DA73ABEBA3EF8
-:10D46000757CB5DDDFEC225FD06FF41791FD5F4175
-:10D47000E73061FBEA8FF717255AE8BB55F81349E7
-:10D48000580EE3B77FF5BC2AF27C6AF05C56C947B8
-:10D49000EDD3ADFD9911F9AFAFE321833B5CEF7E96
-:10D4A000CF732A75BDEAFDDA7EAB85FD9B937625A9
-:10D4B0001F9F0EE9D40EEB1D3EF2BFB7981CE4C7C8
-:10D4C000279A5C908BF86934FAF8FE9ADA2FD1E447
-:10D4D000E6EF9179F9814423D0BDE58154E5FCF76D
-:10D4E0002B60BD4271E8169CB7AC56D7BCC512D2B2
-:10D4F00087AAFE2C1B87DF0BE81EA93EE42720DF4E
-:10D5000094156BDB87F6A32DFF7BAEA06359B26E3B
-:10D51000C838B92457C8651B74C8429E851D9DA88C
-:10D52000E01D0DBF1CEED7AC52F4FC40BCD9430744
-:10D53000BB13B78A7BAB13F5BEED04510B404B1206
-:10D540005D99F489F1BAB4FA9C6CC81CB6CBE3D8E7
-:10D550002E4F50C87DB7D4CCF75B43F75CFD32C18A
-:10D560008B21C8D009563D412403C34BC0C5702A46
-:10D570003433BC0CDA195E011D0CAF023F43F8894D
-:10D58000AF0DD81EDC6E65FFE9F2253AB2CB65D748
-:10D590000EED97CF52F0353C3E50CB579C3B3EA60C
-:10D5A0002AF77287C5CBD87CE67B152F26E24FEC95
-:10D5B0001703DE34829320C0E34C2646CEA678DDE6
-:10D5C000C6F77E6BC1C9E5BAB3C44765C0AD77176E
-:10D5D0000C8197DAA1F9649EC22703B9C0F851E91A
-:10D5E000F548AE8DCB2ADD30504C237B104D4FC813
-:10D5F000A07596C5D61CA7A722B73F5F36538F7A72
-:10D60000B4ACB4660DA9905FE64E15E589352FD30D
-:10D61000517DFBF3978A72714DA9C1815EE8DACB27
-:10D62000665E82FAD9ADDC2737A311A07B6372B6A0
-:10D630003817762BF7CA4D72E65ABA2F66BA0D58CC
-:10D64000DFB86300FCECD722B791BCB8451C7BB3B4
-:10D6500055D0AF3AD67D4B2ED933B32FDE8674B872
-:10D66000796DDD28B29BF718C5F89FA4DAC6BD8195
-:10D67000F83299C4BD5675BF58EF89C17240B2AD3A
-:10D6800069C90CAD4B5DC759CC7BD7E9E6CD4F7767
-:10D690006F203D023607C7156314FBBE65CBC4344B
-:10D6A000F430701D565E47202E774D0B56DD91EEFF
-:10D6B0007A84C61B88137CF808D1297578E8CB7565
-:10D6C0003E943BC4F781B5DFBCEA23BDF4292E04A8
-:10D6D000C7F94DAEFB715A47932E90518AF4FB4522
-:10D6E0002C7A000521BE96909873100F6D4EF01A9B
-:10D6F000595E947736CAF9992A17038B713CC44F47
-:10D7000099CB558BEE2254CC6E7E9360A5BBBD1693
-:10D710006B689E17683D4D72B081F8E468E207C6F9
-:10D720004F596EC70AFE54F459F7B69EDBC688A25D
-:10D730000BC2E4B269DB89AFFF86746F3A66715041
-:10D74000F3903C3EB6469CE75A34FA4695D3095DC1
-:10D75000263E389CB8F5A2C5D46ED207BDD9A4B771
-:10D7600027F706DAC87D1EE8DE3B46C889EAD77F80
-:10D77000239D8B7DF9CC8CFC914010F9235E9C831A
-:10D7800073FCF48A38075FADE43DA9ECE17D8B784A
-:10D79000548D3B57F6BC2DDE8579F06F05BD2B12FD
-:10D7A0007F963E71E355C46F91EF8BD478B449698D
-:10D7B000B7A2D77B37ED27F2BD5113C5A345C3BF31
-:10D7C000376A7AA296E3D1C8F746BDB94AFE4AB194
-:10D7D0008FA0F8A14B9436B43F0BC78746AF09F72B
-:10D7E000B6FAC9350E2B95D32D0ED6C7573D0EE18F
-:10D7F000EDE18964E619559E97AD93D8BF56F15A6D
-:10D80000FCBCC949EB287E7E14FBCDE8EF8B7BE99D
-:10D810004A3E91DE12D07B83CD89C12CBA67BAB95A
-:10D820003BDF41FEF81F5A9DF00F43687D6A3C5074
-:10D8300027BF544BEF878E2DC2380B3FADEE79A634
-:10D84000CD8CE5D5EBE95510A584F313C8AF2ADFDD
-:10D85000298397C601EF43D5083B153937A5E9C0A1
-:10D8600016868F18DB08B00D910F3029F48BCD4F41
-:10D87000D2D4C7392ED0F44FA8CCD2D4B7C588F7AC
-:10D8800032E071FA0B2A42EF48129D3FD1F4830037
-:10D89000FEAD08BD17B9277EEA4E7E4FE26FE03C31
-:10D8A00045F265259AF62679AB4CFC5DFDA55E43F5
-:10D8B000CF9F52A61BF156B91BFD1C9C67429FB619
-:10D8C0003E26E001EA17B35BAFC94B986CDAF285EC
-:10D8D000794A9E622C8CD5E42906F12EF8FED86197
-:10D8E0001DF34505E4FCAABA8CF06C00AF2D1A6F4D
-:10D8F000C740F85DC7C65A1CF4966A42CFCB32C9FE
-:10D9000041AA4B8BFF51B3B5F81FEDD6E27BCC5249
-:10D910002DBED39BB5F8BEB0458BD74C8F166FD9B3
-:10D92000EB2668DADBDB6B34E5BC8D5768DA5FE445
-:10D930009DA1298F7BF17A4DFBC28E859AFAE2AECA
-:10D94000E59A7A95CF86E383F1BED511FCA603DD77
-:10D9500069F8A074E7CF35F3FD50F49F9FA7E80561
-:10D9600085FED72B76E5DDF8C3F792B84E8B157A96
-:10D970007030DF506DE078EE3D5B726D1CE905C5DF
-:10D98000DEB9147B07394F89B255941D7E71BFA251
-:10D99000649FAB36DE46F72CC4FD8A8AC3EDB50919
-:10D9A000D43EE21DD6F44A4973DE1DF92E6BA667FC
-:10D9B000AD9C20D1BD44713F31F21E84FA3EABDEF6
-:10D9C00019A339271FEEBD969A5FC278018C142FD8
-:10D9D000E8CCFC3E31DA1F726C94D95F73B3FFF66A
-:10D9E00067C9CD79A76BCCFE0CE2EFECB1EEF5790F
-:10D9F00088B7A33A878DFD3DE5FDD6006D8CDF2FFE
-:10DA0000F5CCA43CE90086BB94D7D4DFB36326BD34
-:10DA10005BC4E55B031522ACA63F8FE6B91FA4717A
-:10DA20000E48D6BB4BB1EFBB133ECF207B66A27333
-:10DA3000FE123EFF7E382FFCFC7B14EE0FF56D408E
-:10DA400067F3F079EECF258E533EA7C1AAC2E477E3
-:10DA50009D41794F2AE2B6B90ABED4B86D8E32FF25
-:10DA6000011C6229EAF3B95D7F66BCAC48EB53E266
-:10DA7000BD668715C7BF71ACA584EF7B394B1D22EE
-:10DA8000DE57E3B831F2F7B1B367BA87B522ED8854
-:10DA9000269E86979287CC5746E6C542FB16E31F23
-:10DAA000581FCB76E8C0FA74CE3F86C63FCAF985C8
-:10DAB000B9CDDAFBDDF35B3ED2F0DF02CF279AFA75
-:10DAC000404AD03006F71F7875F4D41B107FFDAFA5
-:10DAD000982A289E45BAF5E49587C60FDC97778982
-:10DAE000F01BCEB4CFCF791DBDCAFD5A759FFB5B2D
-:10DAF000F77139D01A88B8EFE4D1C4BF2A34FE09CF
-:10DB0000F2C98F0E4A231C43E57366E78B38A95789
-:10DB10007977DAABBC3BED55DE89F62AEF427B958F
-:10DB200077A1EABBDD5E099C74BF648EE47A6A81EA
-:10DB3000C4EF760FD13E9B96078BE85D635371600F
-:10DB40009E24F3BBDD23F47D8877BB459295F46971
-:10DB5000EA35F46EF7F008CF51B2D8D9F989D75029
-:10DB6000BC70D828E4A3F4C56F66D27BBDC753DD73
-:10DB7000C789BF3F95641FF3F3EB129F2B8333607C
-:10DB80009C7116EF7ABFCB13E73427F3C4B9890A27
-:10DB900047E60BBD564AB09CE8726F2EBFBBDA68F1
-:10DBA000E27757389F5317761F22F27D5CC91F4DCD
-:10DBB0003ED21F6ADE27215F9C37D3BB395A67CA22
-:10DBC000FD26F16E2EE0CFA07776740FCA45F2BD28
-:10DBD0001B9CE21D5EDEA6F0F73009F9CA3DBD458B
-:10DBE000A079A7B7B2E7C07ED227AFE5B993F353C8
-:10DBF00043EFC756C66F677FAF20DFC6F3E27A797F
-:10DC0000FFA817EE24FA9CC77C61567E79F4FFD7F3
-:10DC10006038BCF52FF63F5A90197AF716F6DEAD4C
-:10DC2000203F2CAFA7AE3F34CEE9E542CD7BA9E53E
-:10DC3000438FDD934B72867411F948599A3F63887C
-:10DC4000FED3F305FDEF4F774DA0F997378BBC60FE
-:10DC5000886FDA6FF998E8DC6319F23EBFDA3F7239
-:10DC60009F2BB7F5303E709FF3687F61FBBC8CF053
-:10DC7000A5EEB3BF7BEFA305B673DFDFF77D776E4D
-:10DC80001A81716DD2507976B43E617E9949ED3F2B
-:10DC900056AFED8F0E39E5B1BB48DED16FE954E2E6
-:10DCA0001EB2CBC417AA5DEE54E22029B083ED0268
-:10DCB000CD4B7271B7E461FBA8E63BDA24B47F94E4
-:10DCC0005770AF617B215F6871105F7722EFF94970
-:10DCD0001EF4CE58CE7347C4D73F8B75DF4478BC53
-:10DCE000F9AF35A328FEDEF2972B94384ED8AB72ED
-:10DCF000853FCB697EDA474102F36D99B2BE0A7364
-:10DD000033FBC955E091455E43C993ACDFC1F1DFF8
-:10DD1000FF011A14AFAAD043000000000000000069
-:10DD20001F8B08000000000000FFFB51CFC0F00374
-:10DD30008A739418187A351818366B32306868313F
-:10DD400030883120E46885AF7153A69F9B9581810F
-:10DD50001788F981581088D73331306C60225EFF04
-:10DD6000115104FB9E2003C351207F1990EE1466CD
-:10DD7000605805641F03E22F40BE801003830C101F
-:10DD8000FF1561603005D2C1406C03C4C745F19BEB
-:10DD90007F82807CBC082ABF1B8D9F278C5FFF255C
-:10DDA00011FCF20F08C863C33216E4C74722057A94
-:10DDB00007023729A2F28FCA33303C546060D05139
-:10DDC00082F09B91E4ED8062C7E421EC2992C0B817
-:10DDD00007CAB5286237772A50FE0450CE4B8934E3
-:10DDE000F7DCD341E5AF3484D000BC3E14E4A80393
-:10DDF00000000000000000001F8B08000000000071
-:10DE000000FFE57D0B7C54C5B9F89C3DE7EC6E92B4
-:10DE1000DDCD262121BCC22601440DB8400CA04115
-:10DE2000370F5294A8E1A1A2226C782421EF22F6A8
-:10DE3000621FBFDDF088C4521B1FC5D48B7651B062
-:10DE4000D18B3640D058175C9E458B6DE845A0D5E8
-:10DE50007A13405E06B240A5B645FDCFF7CD9CDDF6
-:10DE6000734E36266AEFFFF6FEFFDB9F1DE6CCCC35
-:10DE70003733DF7CF3BDE69B8964BE91D88713F20C
-:10DE800025FC6E25E451891092184E9B3C93C69F49
-:10DE90009409B1ED7E24EA3B99840C9E6B7046D1C7
-:10DEA000A25F08644E4B0621C9658D7546FA3D791F
-:10DEB000917DBCE808C319987CE4BABD09840C7252
-:10DEC000D3F66682BF2FE97F3FB737C69174C87912
-:10DED00085A231E1FA4A9ABC48FA7B87AABE9B1414
-:10DEE00075A6DD48FBFB51FD20B785901FC3784622
-:10DEF00042A9CB40B2E8B8785D6F2EFD3F3A0EAF35
-:10DF0000CDE85B2910221A1CB1442424262348A002
-:10DF10009DBE9F673CEDD74908A736AAC84AE74986
-:10DF2000C8B49608F57289807888CD76257BE97823
-:10DF3000577D2EE2BC570D22A49DD62792D34E6862
-:10DF40003A95C461BDC72D2306427ED5AE3F120768
-:10DF5000851B9B19245E15DC060F210E13C5AFC768
-:10DF60008CE92A8F9DA7C9C4710D21AB3D0E4C577A
-:10DF7000794663FAD8D027DB7306D0F90C32D8E99A
-:10DF800048488363A6DD91118627C72D30E73809FD
-:10DF9000C92629AEC4545A2FD140C84D84DC42F35F
-:10DFA0007523081949EC8450FC3D93BC2CCA9D0193
-:10DFB0007907E6450371C37C6332032E91E22DC6D7
-:10DFC00069CF951CE1EFF81B80DF5F782C15D6C177
-:10DFD0007D1BCCEF19E2ECF0029EDD46E7265A7F6E
-:10DFE000A5EC4C5E4AE18A46DA2E83ADBB94101E46
-:10DFF000DF4CC01FED8FCCC9D5ACD730184722B449
-:10E0000073DC05EB6471B2755A097415611DE6F293
-:10E0100075586577D919FD384924FA11ED5AFAB1C6
-:10E020006468E98F7EB19FBA9EE769BF4D42ED3BC0
-:10E0300053E93CBD4B0CCE4DF4DB60A15100F80A16
-:10E04000BC25C480FD2AF9416552A063B41A9E170D
-:10E05000CBE9F7F60E73CFEF2D06E252E872532AA2
-:10E060007C77C4CEA0E3266647EC4C6BCFF187E902
-:10E0700024D925C940EF0E4C1B0447AC00E37C4774
-:10E08000249B049C7F72A4F6FFD3ED08F1E17A375C
-:10E09000F07554DA513C203D791F8B463C88503452
-:10E0A000390CE7171CCF17AD454F434A48E3685872
-:10E0B0005F9A5F87F463A6792BE69BB0DC1ECA3FAC
-:10E0C0008BE5C9AC3E5D5EBA18BDE3555917DA6EF3
-:10E0D00003C29142705E44389650BF9B303F2094FB
-:10E0E000FF25D61FCAEAF7B71F25EDCE0D9EC2F950
-:10E0F000BF2E3B009FC2DBD6C0AD942E0E6E107CAF
-:10E10000269A0FEC8C41FE757EFD0C9F89E267D745
-:10E1100038930BEA9FDF9883F9BCEDEFDB245A5E5E
-:10E12000B55D94206FD879D6D641F15B636A7FFCE8
-:10E1300066FA3DB85D242F6077D3719F9DE2B448A5
-:10E140003E63F9922896ADDAB06B1EC02D6B339109
-:10E15000280AA7EACDD23B6FA6F9D20332812A550D
-:10E160009BEA8C83697E894F6881FC8A9D1F603F92
-:10E17000DDB9A40CF6F739E05B942F75DBDA93EE8A
-:10E18000A6DFCB7D5B0AA07EF966C1094B5CBE7E33
-:10E19000D78700BFBC551E2152F815CD31C4A1DA76
-:10E1A0002F79DB17DF09E3AD7A472694ED91B2AB07
-:10E1B0000F199118A44623E0B56AD31346E09BE7F4
-:10E1C0003C07B01F059F552FD37E68BBEAD70427B5
-:10E1D0004CADDAC0F8CD8537A3E6BC688179D51996
-:10E1E0004741FB371F3542BD525FF1EB510E18DF3F
-:10E1F0000663018C73FD0663898A6F5634FF5633BC
-:10E20000AE534DE903DD19BDAFE739CEB7957C3983
-:10E21000154048DF92CF3843C5879E33C421FD5750
-:10E22000348BC411811F78DFE7FB608795F103BE53
-:10E230005E4BEDC01AC2EB75C9CED74F0A66CD88CA
-:10E24000C0E71EE7F2A391CB8F27417ED0F4692E61
-:10E250003FD671F9D1E471E2F7673D93305DEF711C
-:10E2600061FABC671AA63E4F11D67BC13307D38D26
-:10E270001E377E7FC9538669B3A716BFBFE2598E8A
-:10E28000E9668F17BFBFE65983698BA711D3AD9E8F
-:10E29000264C5B3D3EACF7BAA719D3364F0B7EFF39
-:10E2A000B5A70D53BF2780E94E585F9A063CED98FD
-:10E2B000EEF61CC374AFA703DBEDF79CC1742DC74A
-:10E2C000BB2D9BE448146F36174139185FE8CA919B
-:10E2D000693EBE88E593E67A738C349FE4A6798A1A
-:10E2E000C7C195811C13CD0FAE65E5293F24B966E2
-:10E2F0009A4FF1B2F2B4B5AEDC289A4F6B64E5A345
-:10E30000D67B73A3697E948F955FB739901B43F3D7
-:10E31000D7B5B0F2B17E9267A1F9B101961F7FD057
-:10E320009567A5F9F1ED2C9FF5A137CF46F3591D5F
-:10E33000ACFD4D5D81BC589ABF29C8CA6FB94AF27D
-:10E34000ED03402E0B98CFB5E4E4C7D17CAE9DE53C
-:10E350000B86164B8E08F4B753EE5808227C86B015
-:10E36000D125517EB3D3D8F110157D64A1F0AA4B0D
-:10E37000A2FC3320934550FEB0F03A96078C641906
-:10E38000943F2ABC8DE5BB650796FF5C38C0F2461A
-:10E390000796FF877008F37B651796EF10FEC4F2AF
-:10E3A000461796FF5E3881F9FDB21BCB3B852E9652
-:10E3B00037BAB1FC49E953573EED2FDFE09E2EDC22
-:10E3C0000872DB5D8672596A49067E59CFF9FF04EF
-:10E3D00040062DAF1F644439B8F3F3AC174581D321
-:10E3E000F600C897BC04FA0585335B48047D82C2F9
-:10E3F00011FB8673CB179334706EF9A24C81F32016
-:10E40000C289EA1F9C9D5FDCA41DCF17E50A9C1200
-:10E410009C97B57FF3BAE5CB6CED78BEAC54E0D4F5
-:10E42000209CB8FE8D27204FD4C009C8A50A9CE5C2
-:10E430000827B17FE37119276BE0B88C4B1438754E
-:10E44000086750FFE0048C376BC763AC50E03C8634
-:10E45000781ED6BF79B94C53B4E3315529709EC2AA
-:10E46000F1A4F60FCE6EAB163FBBAD21FCAC473826
-:10E4700023FB37AF5C9B163FB9B6107E36219C6BF1
-:10E48000FB0767B74D8B9FDDB6107E5E43FC8CE9C2
-:10E49000DFBC7263B5F8C98D0DE1E70D1CCFB8FE86
-:10E4A0008D676FA2163F7B1343F809209C1BFB3737
-:10E4B0009EFC242D7EF29342F87907E14CEE1F9CDE
-:10E4C000BD495AFCEC4D0AE1E70F08674AFFE695A3
-:10E4D0003F508B9FFC8121FC7C807072DCCD4CA96D
-:10E4E000A470ACBDC3D93F4C8B9FFDC342F83989A2
-:10E4F00070A65238E97DC32948D1E2A72025849F20
-:10E50000F308E7B6FEC1D99FA2C5CFFE94107EAE38
-:10E51000209C3BFA37AF82E15AFC140C67F8B955DE
-:10E520001A877286CA4E27D8E7DF199AE31232C1DA
-:10E530004E6279D1EE24A0F7888A3E43DA5D22AD9F
-:10E540006FD91C37FE31A2D66B728D064ACF56AA00
-:10E55000E5A9F59AD849D11A3D2ACE15AFC9274C5D
-:10E560001BACA99F5894A6291F38E73A4DF920F70C
-:10E57000784D7E48D94D9AFAC36A7335F9E1CB6F6D
-:10E58000D7D44FF5CED4E4D3D7DCAFA93FB2718155
-:10E59000A6FC9AA6724DF9B5BEA59AFCF5CDDFD7BB
-:10E5A000D41FD3B242537E43DB639AF27181273585
-:10E5B000F909079ED5D4BFB1FD054DF9C463AF6815
-:10E5C000CA27776CD5E46F3EF36B4DFD29C1DD9A08
-:10E5D000FCAD9FBDABA99F43FE53AB6F9B3FD0D417
-:10E5E0009F6A3FA129FF4EF2273A3D556B1FAFCCE2
-:10E5F00021CCAF3288D9AF01AB11F3C6C11666A7E3
-:10E60000584B1C2729FD18772F740CA0F4033403F2
-:10E610007651CEE0B26B3AE8F7EFDDE4BEC64EBF0E
-:10E620007FCFE8BEC11E41BFA1F4269064481D06FD
-:10E6300048F5E58FCA8CDE73875C1DD549DBD7189A
-:10E6400082A3E268FE2331E73EA0C7F90603EE830A
-:10E650006891D442BD681341BBE9D1D4AC17BDAABF
-:10E66000FDB06618D5338430DC35B23B19F528C3CC
-:10E67000F83AD09BEA87D1790D2664D18A71BBBC68
-:10E680002368FB6125C9E08F3019993F24D4BF91DD
-:10E69000F69F81FD2F81FE6B7AE9DF943649D3BF67
-:10E6A00039A54CD3BFD948FBB713F290E126DEBFA2
-:10E6B00019FD36CB564CC6FE4D2965D8FFA3466AD8
-:10E6C00077A9FB8F0EF5FF8881F6EB3130BBB9C718
-:10E6D000FCD36ED2CE3FA55C3B7F239BFF4A432EEB
-:10E6E000EF3F1AE7BF6A450E9B7F4A399BBF89C13E
-:10E6F0000DF56F0BE1BF01FAFF692FFD9BD2B3B59A
-:10E70000F31F5EA99DBF89F5FF94E176DEBF05FB8F
-:10E710007F7AC56D6CFEC32BB17FA3C9ED04FA31BE
-:10E720000E89AEF5D1FEC9506A250D0472A1FD40D7
-:10E730003A3A1EFD08771AD2701CDF8B66F47625F4
-:10E740009AD21BF2332FB3C37D947352BBAA9AD3D0
-:10E750007AC5E61C23F03D2C4F2264311FEAA23615
-:10E7600011E99B3C6DF28DA4E3BDD0267A21BFE870
-:10E77000E9293EE0AF352632BF08DA492400DF3F01
-:10E78000FED99817D4F3D2A78B1BE55391FC45DE35
-:10E790005C32BA968EEF0210812A7F9CDA71601883
-:10E7A0007F48ED1E42ED9F1332EBEF236AEF41BE2F
-:10E7B00083DA7B6838933AE657F3BADE1F41C75FC6
-:10E7C00044949F0BE7792F6E290A4F62FBF7F85AA2
-:10E7D000C107EB317F790C457E783CC5DE044DBE28
-:10E7E000C6C4EA076F137C2F0808C30DF899C1E16E
-:10E7F00011182FCDCFB1B3364777DEB15FB0D17DE1
-:10E80000B466085D8B309C59C4250FA4EDEF5E56AD
-:10E810002C836BA75D1086819FB066A14C02683780
-:10E820007B134906270E3ADEFBED0CFE0C977C525B
-:10E83000ED479B239B5D45743C738A451CFFAC6987
-:10E84000DAF23FED8C7119C6D274CD53D8CFDD45C5
-:10E85000DAF27BE768F3F7B9B5792A576590AB0F21
-:10E8600094E9BF53B42481DF31F41B00E37C90E3CF
-:10E87000E1C15AD9AB59576A761B95727084B809B1
-:10E88000CE0BDB8B3DEBCF5FAECD177BB5F9856B48
-:10E8900074F039DD9CE2EB7F1CE883A6A7813E285B
-:10E8A0003E4F72FA08F3552D7DDC139A06A30F65CF
-:10E8B0001EA724B604A7D633FA58DC1813991E8A6B
-:10E8C00043F4E052D397420FF3383DFC99D34369A8
-:10E8D0009396AEEE23BED5C9B4FD036B77E13A1D26
-:10E8E000118A193DFC40A1870E0D3DB8393DE8D78E
-:10E8F0006F1EA787798F307AD0AF6707A7878EA65C
-:10E90000CB3249EBB9AE741D3479BA0EBA75B7A3E0
-:10E910001F8AAE47447A58109A379D38CD2FE46548
-:10E920003DD68BD30396A701DA09E209DBA7F7AC42
-:10E930004FF984265FDA1479FD6BDA36AC3DA9FA1B
-:10E940005ED5F2F25AB57FBBA2798B26BFC4F7A67B
-:10E95000A67E69D32E4D7E71E33B9AFA0BD71CD26B
-:10E96000E48BBD7FD4D49FBFBC5353FE60ED594DA3
-:10E97000F903651735F9FBDC7FD3D4BF778EF0132D
-:10E9800075FEEEA2A89FA8EBCF9A16A7C9CF700D6F
-:10E99000D2D437ECBCF62EA0C783EF8B04F48F4F94
-:10E9A0009DA7D1FFF9A95376429D931E07EE83538D
-:10E9B0009ED1989EF138719F9CF34CC2F442DB1EAD
-:10E9C0000BC8152A474BE0C8A674E596BA35D9207E
-:10E9D000D709CADF8A956FD4798712B21494638AF3
-:10E9E000EFC22623094C204400E1C4C7151455E5A5
-:10E9F0001D7D9437514191D0B3BCB023F2F79A27D3
-:10EA00008B87DB239C7F84F73519027A52772FE7B7
-:10EA100024950229527F276405F281AD5C4FA93409
-:10EA2000327E51B975502EB1413E30AAF6ABFA6B29
-:10EA3000A19B6C20D049BA663F97365DAFE1F704E1
-:10EA4000BCCF89406F1334DF2B9A6FD6B4EBDA2535
-:10EA5000E2B8AB819750B9FD2A297A52043E15D805
-:10EA600093326B0C8CD3F514E6DB12518FECF2343D
-:10EA7000AF85F3C7739E164CCF78DA303DE509AC0D
-:10EA80008573C0939E03981EF7B463DAE13986E973
-:10EA9000479E0E4C3FF49CC1F44F9E20A6C73C9F5E
-:10EAA000617AC4437E02700E7BCC98FEC163C7B40A
-:10EAB000DD938CE9058F0FFB51F65D5F747786CB94
-:10EAC000ED73407F11E86CBB78AC6ECDD0309DBD4E
-:10EAD000B9F223A43305CF854D264E0F491A7A0883
-:10EAE00080ED7723D04B1FE54D32A7C3DEDA472EEA
-:10EAF000AF79E1BF87DEAE7C4B7A0BD3D3101D3DDF
-:10EB0000A5F7454F1FAAE9E98AC1CEE420A7A71FB0
-:10EB1000F3736B7DBF51123BA70CE977AEDB0C8022
-:10EB2000AAA5FCDC84906998BFC4FB5E49C1B5A36B
-:10EB30001EE81B0D72EBD2E8BF8F8273874BC7E8CC
-:10EB4000E2A7F63E3F3D9DF48E7717DA43253EBAA5
-:10EB5000E80911C61BCDF01A6520D3C878421A46C1
-:10EB6000BEE45C90817989C4437B9F734684F33A09
-:10EB700042756BC06F5F785D69BD3216E09D7AF6B5
-:10EB80001F59905EE1FA75F41E11F57C1278D109D7
-:10EB9000F80DC925933319FCF3C191463BEA09648A
-:10EBA000BA167FDEDB35F86B4855CECF1B93117F4D
-:10EBB00023AE8C1AD40FFCF5C5DFFBC2E70298F731
-:10EBC0007F033EFBE28F7DF145E272BCD646E7DF74
-:10EBD000BD73CCF8C71CC007BF1ADFCA799C7E3C46
-:10EBE000F992F4B5E8B83B49A1E3F614885BD82460
-:10EBF000DA11FEA5D66B62615D4270FA584FE1ED05
-:10EC00003FA780BD7F3E550B2F4B07EFD281176D7D
-:10EC100060772D4D5ED87032C23A2869554B5D83BE
-:10EC200045AD87B669F3971A85692D382E47ECEC08
-:10EC30003120276A1B18DF5E8EA90267697209F608
-:10EC400073AE393D96D97B3EC60F36C721BF38E734
-:10EC500029C3FAFFECF1F40647190F21ADE484193A
-:10EC6000F8312D4BEFBD7EAFF42CFDC588E7DD7E7E
-:10EC7000F90AE88966FADF9760771009F30ADC9AE7
-:10EC800016D16BBA01BE6FD6F447DB399433E22F4D
-:10EC9000D3BE6ADF48E49442B7545ED483BD80E7B4
-:10ECA0009B4B1AD47A5955CB7735F99AB6471AD473
-:10ECB0007A5C05FC83F25F522B484037959C8CBAF6
-:10ECC00025CB1A818EAF18824F808F08AC5E95B924
-:10ECD000C3E8A69FCEB7B275EB6D7CE73CE65488DF
-:10ECE0003B283337E2397259CBB5F92067CEB7AE3E
-:10ECF0004C02F95B215EFA5E5184F6BF94042E5FEC
-:10ED0000E4A056CFE7F441285CD5BCE9CF12C21786
-:10ED1000CD7719985F460FB78DCB91BEF053BDF9F3
-:10ED200050C1CD8E9E78AA6EBB6874235FA4FFCBC2
-:10ED30000AE349C15FB154D426D171973777A2FF56
-:10ED4000E28CEC1DF583AFE0973DE767493E15A3E4
-:10ED50009A9797B4433F0B26F18E88E3DE0F281F66
-:10ED60003FFB5B99001F225769AD2C74CD70BBC768
-:10ED7000400C5961BB67416B4521E0FBECEBD3D103
-:10ED8000EE5B448A6CB80EA4310BEC9CF3C480712A
-:10ED900055E7C91F6C1354EBF0B164E478A65C30FE
-:10EDA00089BB3410BE7B10D85FA639F5EDE258F868
-:10EDB0002E297690F025CA15B780F11773D8772FD2
-:10EDC00031D701FD527B4A63AF517B4A93A7F6943A
-:10EDD000265F426626413C45C9D332F10988274D5A
-:10EDE000F941C98EE32B25B5F5A01FFD9CFBE1166B
-:10EDF000D8893484CA87AA379ECB2AA6F3E9929889
-:10EE0000FF4B890F584265C5205A5E5EE633BA2C27
-:10EE10003DE777A275C23D94F3033C160770BFD15E
-:10EE2000C7E26B8843CAE2AA4F5AEFF31FD82ABA47
-:10EE3000A26C508F7E57C69BFAF5E7AF9F2F214FEC
-:10EE4000E23CCA9B67601C568F78073E1FB9597019
-:10EE5000F922EC27511634F12E0932C39FE2D71A5A
-:10EE6000AECB5F0F7995DF6BA2AEFC1BF39701442D
-:10EE7000C35F8A25F7703991F113C0BF2005717FF8
-:10EE80007D63F8C93DE05F2FDFF84F843F54BBEF4F
-:10EE900029FC89FFD4F18FE831FEBC48F0ABDE7865
-:10EEA000F57588772CFFD5CF6C84EEB7B35263929B
-:10EEB00093AE7BE5A6D53617F01DC96B837D71D661
-:10EEC000274E8B440FDF9779DC1F715904F0BBC2CA
-:10EED0003F29FC73AFFCF84EB0A3AE6C92EDE84F47
-:10EEE0006D36054C949EAB5B971492B198EF64F924
-:10EEF000472F02FDD7B4C9C7D5745AFECB9F254111
-:10EF00007C10A5942186644803689F546FFCB80068
-:10EF1000F48D1A12C4FDAA6F07FD7F168FF2B0D8C8
-:10EF200018DBB31C1D3449D09EFD6A5A7F7C51B456
-:10EF3000417ADB69E06FD4B244BF90BE5D19B73B44
-:10EF40002A64EB00E4AB13C944E0AB0A5E888FD9B6
-:10EF50001D2B5F7E666C271D57D7C6DFDA0415BEF2
-:10EF6000147BE952CBC25FFCDAD13B1FBF40F7A351
-:10EF70005ABF55E494A38DDB4B7E9656CA011BC441
-:10EF800073556E909D5EFAB9F2D5175F7A16FCD96B
-:10EF90007F34394752F815AFEE3B7213CD576C9161
-:10EFA0000714B2695884A4F0FAD4D0FF968F0FAF3B
-:10EFB00047F9B67D46C718F6FD87F1E175A9D8B2C5
-:10EFC000CB48C6F4C4475ECB2E638725C2FAB4741F
-:10EFD0001680FEB7F2E5BF1A81EF9DDD299081A969
-:10EFE00011F0B9611FEA8780275C4FBE5EA1F5D39F
-:10EFF000D5AFA1EB027246BF5EFA7A859CBF005C7A
-:10F0000088B3A1F4FDDAAF210EEE4F2627E0A1EC84
-:10F01000B5876C309FD3522DA3F3E7562701BF2B42
-:10F0200093BD49764CD9F7B2E71F46FA2B3DF470F1
-:10F0300012F357BA061950767A07C13C17AFBF1BB7
-:10F04000E75942DC488765CF89453E9A7E2A916917
-:10F050005B22EC934B7C9F9C7E812E2E9DE7694525
-:10F060002EFC41E472E1BBE80F7D98CF856A909851
-:10F07000FFD4CCD6EB806CD0C8D110FD6E7C14E5EB
-:10F08000C7B961AE8170EE561396172847C4435333
-:10F0900007B275627207DB51B99307DFA17EBBEC43
-:10F0A0008A1AAB69877246E97F19EF9F8E3B1AF483
-:10F0B000B7D34991ED91E146850F503D434567AA8D
-:10F0C000FDCEF6FFC606B6DF95FDEF9B310DCAFFFC
-:10F0D0007298ED23680772978E2B3010CB77CD1680
-:10F0E000903F984820D23EDF28F37DAE2DD7D30B3A
-:10F0F0001DBF24C4AAE806FA89C77540795FF234B7
-:10F100006DAFE2A335D0AFAD275C651F97727E70FF
-:10F110001EF8C1F5617E40D627F62B5EB452F6BDCF
-:10F12000F42CEC5FBA5FBD0ED8BF7211CCFF93CD4B
-:10F130007B8EDC4FF7ED272DCABED5F255FDBE2DD7
-:10F14000DBFA30C69FEBF7ED27436B49C47D4BBF1D
-:10F1500047DCB7433BFE47F8AA82C724A396AF2AF1
-:10F160007CB2377CEAF9E416D98178D5F349FA3BC9
-:10F170004CB27AD2A342870AFD95FF47D570E0478B
-:10F18000213A55E83044A70A1DEAE7ADC5A3BEFC05
-:10F1900023F02D527A297A53C6F3954A3F8B03A662
-:10F1A000EDF60FC9447CB950CC91C6FD4306A8F3D7
-:10F1B0003E5DBE4557DFA5CB17E9EABB75F95A4D51
-:10F1C000FDCAB63D46827410D0D41397FF3B393147
-:10F1D0002112DDFA98BFA1F5A211EE39D45882D8D8
-:10F1E0005E5E41BC101F19DC21E2B95137C5713D8B
-:10F1F000F83736A7FABC948FAC8E627E856E7BD0D2
-:10F20000164FD3D5712C1F4C34D6031F54BE07A301
-:10F2100098DFB1BB28688B53D95B9D7E11F9788745
-:10F220002FF2BD0D2A6970DD3B7AB9D7A19C8F758D
-:10F2300047DBC6627FD1293EA0C7A9A2256539F860
-:10F24000A11A4527E8EC8BEAEEB5C17955B73FFD29
-:10F25000AE39F4FBE27744168EE37549835476D0D9
-:10F2600019E25D972D405CF05AA49F857E66172DAC
-:10F270005A1B793F94F37625966546E0BBD40E3948
-:10F28000AE3EEF51E094ADD77DF74FE7FBA611ED11
-:10F29000FFF28DDA7237B79F7F64E4FC671C19C7F1
-:10F2A000ED57E6BFE17C7BAA9871D71CBA3EDD071B
-:10F2B0004462A2F94B7E11D7E7D266C107FE37E25E
-:10F2C0004DC4FD574D8246F57D882ED85FD7F4CECC
-:10F2D000C7BAB6FF39EB074047AF7F30F6DF69DAD0
-:10F2E000F5FA1F47BD05F9378EA67C407AD6CFDBED
-:10F2F0001985F102DD3BAD48FFDD3BDE4BF901E452
-:10F30000DF3439619CDD3BFF3A16E8A97B85A90C07
-:10F31000F860F730E6BF5DB9E3AF633B50FEAEC2C5
-:10F32000756C361A999FC9FF8F8FE0DEC2253F9D0D
-:10F3300015E8173CAEBEE6D7513E82F0FF9AA5BE57
-:10F340000FF46DE753CDE343BAAD64CE56185F1C9E
-:10F350008B7FA8796BF28B75B4FFAAD65DC685B496
-:10F360003CEFEDCFC7621CFD56A6375D903B9E87F4
-:10F37000F8876DC6EFAC94299E2FC026A346F65D94
-:10F38000A63579B08F7AE2E573F4A7F5171FEF1A67
-:10F39000997DFDAF8F0FC1C5F89FD5671660DE7FE1
-:10F3A000FBE803F4839A902E95F97ED25287FA4CAB
-:10F3B0005FF33EFBBF860EFA3B6F21D09F799B4DDA
-:10F3C000FFDAEBFDB8D181EBA2DF073DE97CC7F79F
-:10F3D00030FFAAD589E3ED27BD8F36FD3FB6EE5B42
-:10F3E000E9BADBFA9EF777FEC5E7DDFBBABF338FDC
-:10F3F000AFBB1DCE536BDEFE1CC7F775F95CE9FF92
-:10F4000052BA57F4FD7643AD3D938E6F0E69B482C8
-:10F4100062715FE2254BA603A2702F0FC0F83B3844
-:10F420005F8D6057359998BFCD241858BCDADD82BE
-:10F43000E247443BEB4EAE5FDC39B40CF5903B5DEC
-:10F440003F417D8248B5ED39B47E7BEE4227C66AE6
-:10F4500092F1C7DC909F3D85E7B5F6E6EF04E21236
-:10F46000A87E7F67EEF403A0E7DEE512510FA62920
-:10F47000EABFEFA714B0EF93B4F6D07D6E6DFEDE59
-:10F4800039DAFCDD1CDE3D848DFF9E22C1077E58EB
-:10F4900053CE5389E097352D9689900A7146B5ABC6
-:10F4A000C1EEB8BB48DB7E1928672A7FE337C5E386
-:10F4B0006F43785C8A78213922DE03ED138F7CDC80
-:10F4C000EDB3C7F920CE9A484E86C77BAA9CE83791
-:10F4D000E7F6B8CCDBCB9635EDB09F659D1DAED879
-:10F4E000D3BDE19B70FB1CE1A485F12FBB44B4CFDD
-:10F4F000659D7DAEACCBD75D0F651DBFEDBA3C07FA
-:10F50000EB7263785D865A5C04F6ABCCED877C8B3E
-:10F5100093E587161176AEE8C3FAD20017F1668438
-:10F52000E3D197988B2BE09CCC3C5A407FC85D6B15
-:10F5300045940FE60C01C7553449C6F8E38F0D45D5
-:10F5400059B0DE851326567F9F0DC309F85CC2F1C2
-:10F550005E426A517F2557BFFC323B0BCE2508EA3D
-:10F56000BF4B5C84DC41EDB8926C21100DF16A1246
-:10F57000F1C68E073FB9408E6BFCE4DA3CFC6E4965
-:10F580000AC3E9AB7E6FFCE59F9DFE17E567C729BF
-:10F590009174423A12BB97D476F77C3FC3634DA572
-:10F5A000E04B43BA0BC8EAFBD30566B60FFEEB8708
-:10F5B00013904FE6FC744C2CF30764E27DC41A6E82
-:10F5C000375CF23A62C10F76C99FCECF73F36C6A93
-:10F5D000BEAAA487B81DFE9F109748D3EE7CA15108
-:10F5E000043B8B04D1FFEBCD8FC27BC5FA76A3CC55
-:10F5F00006BEAF6BD12F003F11EEAFF27994D2A6C9
-:10F60000B1F1AA755B7BC759696CCF7580DF71D585
-:10F61000F9DDB7C52FD8FD80D743511D054511E64B
-:10F620003B89E3AF70F7DFF0FEEA4C7FAA0C7899D4
-:10F63000992F6ACEF99D66EECF984026C0B80A771A
-:10F64000DF669B0CEB724074C27DD51AFF45A33B6D
-:10F65000C2F9B11E9F001FFCF027646709E0F3C4E4
-:10F660004FA208D8D5EFF173C90CB8CF9181AE1E67
-:10F6700017F81D73CCCC4FB8CE6CC77456618E9CF6
-:10F6800048FBCD68B58F8350B5C1BCFE3AB303CB00
-:10F6900087F0764ABDC195AC5EA7D15E1D69FEBFFD
-:10F6A0008B12F87999F37B93847FBD75CBF9A935DB
-:10F6B000900BFA41BEE267D1D335C1FD71699AE082
-:10F6C00003F90DF630E60B05D41FDE53EEAFCF6421
-:10F6D0007256A17B3D9EABCDDAF7021EE7787F889C
-:10F6E000D387826705BFFAF12AF529BFBA55ED9F86
-:10F6F000BAAB6DDC6BA0DF54FB05BB8182AA963AE6
-:10F700008CB00F6BDA9E90E17CE63E07834BA4A29F
-:10F71000B1EAF8837566160FB267FCCDF3804E2E02
-:10F72000AF35812C24AE45176DC087DF33387F0F8E
-:10F73000716CDEDF8964D357F0AB0F3CF6F27C5975
-:10F740000D3715E733AB32470677DA0395BBE48113
-:10F750002A7A5A678EC772E5FBE04A07BE0F42FB62
-:10F76000C371781F3711B84F92D1D28EF76C1FA892
-:10F770008D637458D6B2CB88F954CD7B224A3FFAB8
-:10F78000FD34BB501BAFBC30AF6328E0A5D014588C
-:10F79000E68C40A793A39473CAAF29275C946EC7E5
-:10F7A000FE7F2427962972A203E3E395F602DFE7A2
-:10F7B0002A393130929C585AE71808EBB07447FA4E
-:10F7C00040D8244BDF999A14494EBCEF61E7CC47EF
-:10F7D000F97DF6EED9544EDCA09213B3A3904EF40B
-:10F7E000ED3E51F6495F724259B7FFCBFCE67D9082
-:10F7F0001311F6F7173A39718FBF18E5C43DB345B9
-:10F80000CDBDAC4FFB94133949F7615E76C644A079
-:10F810009FF7B97D7394DF0B807E405E6446D911FB
-:10F820006F7AB9D11B5FFF537FF9FAFF109E15BEA7
-:10F83000BE94DA3FA6D4487448909E97DE47F9BA42
-:10F8400000F4C8F8FAD207B99F53C7678B80CF6618
-:10F85000AAF92C6B5FED6672A1A62DF599B9B4FCDF
-:10F86000FE46D909A2F2FE30DFCD52F3DDCCA85E10
-:10F87000F86E19E3BB97FD13507FEA6D7E7FE6FCBF
-:10F8800096F2B311CE08F431676E8CE6DEDE897134
-:10F89000BFC9D806FBE53D11CF793FE67AC0C171FB
-:10F8A000BFC9047DFA493E9E797C3D2F7848793E58
-:10F8B000C55FDE22A64F576D16117FD5AD6CFF5781
-:10F8C000370B3E07CD178CFF1B9ED756EC60E7B574
-:10F8D00074068539AAF5AF78AFA31ECE092A36087B
-:10F8E00078DE0CF71E009FA51C9F25CE0A3C5729E9
-:10F8F0006DD2FAC11BA26D2F901B101EFAC3AB78FC
-:10F90000FD425310CF1D0A7F293837209FD4B6AB54
-:10F910001A71FB59B04F2A9A75DF9D0D78AE0437E6
-:10F92000D441AFAD6AD1967BF8BC178B818C6D1436
-:10F930003EF93DB3F3F478F7E8F153F62DF173880F
-:10F94000E227F39F879F25FE5D785EF075F1A2C7E1
-:10F95000475D143F1F184F32613F7E6C70217FF16D
-:10F96000BE2BE2BB4E8B9E18A9790FE5A71C2FEF8B
-:10F9700019DCF583A05EB580F54AD76FD99744F3BB
-:10F98000735BC8383866286DD2CAE390FC6F75A0E7
-:10F990007C9F5BBB4580B8DAC5FCBE6099EF097CF3
-:10F9A0003FE6C1E554DED3FA0BC79BDC705E7E28D0
-:10F9B0002A88FC53A1DF9D40BF946FFAF9384E0CA2
-:10F9C0000EE6A39C6A13ECB82F03514C6ED17582DE
-:10F9D000776DF64CFE6B015F17E65F6A63EB584389
-:10F9E000D70DF675819FE75B983EF880FF223BE7D5
-:10F9F000F4EF92D9FB380249407EE744FB5C918FDB
-:10FA000070EE9A93A45ADF1D9D8CFE37094EFCE0E0
-:10FA1000A3FFFB36EBDBCBBA2AFA4C7FD757C1D317
-:10FA20004EDD3A1F8A6A2F9C80E7728213DF0BF249
-:10FA3000C7E179D1C946F6FECD41AE1FE9F705D839
-:10FA40001FEAF77866C0C0212E7A5A14C69562BFA5
-:10FA5000694C3F53F329FD3B485F376EA986B4A339
-:10FA60005E168E7F74DF6E06B93F4DD0C449D11942
-:10FA7000E1BEFF27C097A3BE023E4936A37C79C8EA
-:10FA8000CEBEEE196624F01EDAE53532D2D1BD06BF
-:10FA9000C7916CE02F8FC904F6C7E583371E9D3BE5
-:10FAA00000CA45A48FE2F72654836BA598C5AA9196
-:10FAB000E247985C3AC1FBFF1395D7AE6B7897A0ED
-:10FAC000077BE27C70BF74B673D75407F85B320FC4
-:10FAD000AD8673CF5979F62347601D1BD8BB4FC73E
-:10FAE000D7E4A19DF6D07705DC67C7E87A019CBB17
-:10FAF00067A71E3942C7F7E09A443CB79CEB4ABC63
-:10FB000007CE31E71E149D0E5A6FE15D560B9C7FA8
-:10FB10004E1F2D12B70A2F0F9276F4EFCCADFDEEEB
-:10FB2000DDB04FCAA83C84F79CCAFC87A60E84FCB3
-:10FB30007A01DBD778DD46B8E7D9DE74D19849FB86
-:10FB40002FA1F500DD35EB59BD9A8D02BE1758E2A5
-:10FB50007F02F964C946011FC469A7FAAF99C1F5CC
-:10FB60008129D1BE9EB6A7F952680F7037C6DD0352
-:10FB7000E79335749CD87E521D9E5397D076B498E7
-:10FB8000B46FFC2EC25BB25E2070AFB06C52EAE381
-:10FB90009300DE41D909E54777FDDC08E39E47FB8A
-:10FBA0001B44E12F143BA6427DF203C18EEF2E15BC
-:10FBB0005E8BFBBA9BEF3B621FCDE21404A2DCEF2D
-:10FBC00093D4F12A25D169B89F4A96D7D5C3BC3AB8
-:10FBD000BC89A906A4A78B4690E32729BEDD547FE4
-:10FBE0003D616471307BBC278C1D2AFEB9323A1D01
-:10FBF000DB2F6ACB413EB39814613C85BB8EE92371
-:10FC00009DABA37CE057EB94ED29F07DCF6A137E8A
-:10FC1000BFF02A933B178675A07FFBF47A99C0BD8D
-:10FC2000C795EBD3D7C13A9EDE2C3BE1DC407C8EFE
-:10FC3000C51194BECAFC647BD633B8A79B197FCB91
-:10FC40007BEEEE02E0DBA5944F99707E5A3E56E2C1
-:10FC500028473EF55C14E34B7A7EA5E753658D1B80
-:10FC600022CBA1650591E5D0D07AEE378D2C9F6B24
-:10FC70008885E9BBE3C978F06316570D9BD704F478
-:10FC8000FC20BB70D01E78F3D39F81DCADB4E23B87
-:10FC900065D5927D9DC0E88300FF9FEBDFF229ECE4
-:10FCA00087B2B951F80ED929580FD8476B13F01CF9
-:10FCB000BBC4578C7857E2794B9BB4F4AEF821EF74
-:10FCC000738BC4A5965F6531C4A5AA77F447946E7B
-:10FCD000693FF3DB041FB0CAA33FEADCFF7026E6EE
-:10FCE000ED38AEE55C3F586B45BA3EFAC8C5D54025
-:10FCF000B7F37E2810D0DB89D75D0FF2B0BA497018
-:10FD0000809FB8F487AC7D296D0FE33EFA73465FA0
-:10FD100094CE1DB00FAAD73FB11FEB6F141C00FF8C
-:10FD2000E88662D427CABC22C1F28D9D684750790B
-:10FD300085F1687BBC6212EC83EA55263BB86215FC
-:10FD40007A52E8B393BFA740CCCEB1B3683B67B457
-:10FD500003F9B29E2EC53942489E02FDD47819BDE2
-:10FD600075BE2A3B618BF44D9FEC1EBD427F22D0B5
-:10FD70005F6698FEF6ACCF33023D9EF60918679198
-:10FD800007F40BF4F9B2E29F2116B51ED5177DEAF0
-:10FD9000E9B007FDC1CB58E961FA54E8514F87C774
-:10FDA00025720F8CFBA1D551388FBCFA37EF59CE95
-:10FDB000F6199ECFE5D53F9204FBBA446271400A22
-:10FDC0005EAB241637D6635C4FD71907F5677CBA4C
-:10FDD00071CC8A0EC9EDF120B7A93E4A02B49FDF6B
-:10FDE0006C7E11E32BCFBFD27927EA376F513A00EF
-:10FDF000FC6FB69200DA213EE447E5AD22C66913F6
-:10FE00002990354B65BF2B713115BFB222BECBB7E0
-:10FE10009A7C85B47DF9EB27C6625CC20AA67F7B1B
-:10FE20005F11D83988B7632CDC3B2A97587C8E5EEB
-:10FE30002FF85D34B3C3BBDE8C99037A9BD0CCDE44
-:10FE4000172C6FB95736A9FCBBFBA265A51E9E9364
-:10FE500079E93AC3FB0A303EF5FB764A5C4ED7CBD4
-:10FE60008CFECADB64D4E7CA9BB75C8078CDF263B2
-:10FE700026B4776B9A2F1AC19ECDFBD5ABEC1DC46F
-:10FE8000365113A7D7233EAE590C9820AEABB50A16
-:10FE9000CF7168BE13F32D3C1EED6BC66F55FC6A27
-:10FEA000C7EB5E8AC28A6DBFB4E17B85ED9B6C783F
-:10FEB0005FAAF9ABE3557BC4C3B534F078B83B4EC9
-:10FEC00013E48F91E3E1CEC13F28217D16AD8D87EC
-:10FED00023CD8CBFD17166457A0F35A477BDFAE981
-:10FEE000F310CFDDB5F593E761DC955F5C7E1EE234
-:10FEF0006CA88268073DA5E695F731FE5569171F86
-:10FF0000C3EDA0977F89F1C317FE687202B40B3B63
-:10FF10004EA780FE7161CBDF92202E78D98EA9E8A2
-:10FF2000DF59B63D0FDFBDEDCD9E05FAF5F5237E19
-:10FF300059BF6E7B5AF7603CD079BAEEC027427148
-:10FF40008E2D552C7ED4C1E31B37478E17EF11CF72
-:10FF5000D83AEBAE29C01F5B999ED0675CE361BACB
-:10FF60009E37F4631D37F3F8D5963BBE32AEF13CB5
-:10FF7000FC83AED7B8186D7CE8A7AD8B7FF12C94CD
-:10FF8000B526F41AD718E807FE9478F4CFA35DD904
-:10FF90003189B0DEFF81F1A4B07E850EE0D79FA647
-:10FFA00080BFF88C1C44BF44708709EF6B96EF3814
-:10FFB0008AFBE9C2F64318EF4D785CF80512FAB1F6
-:10FFC000F85DEE03AAD96865F1907C1D205ED261D0
-:10FFD000C3EF3C2E92D1B5122FD95B9CE4B298347A
-:10FFE000FE3E0B8BE7ACDAF8018F3F0CAF9B30097C
-:10FFF000D6ABF32BE350153CD8010F13D571C0914C
-:020000021000EC
-:10000000E3524371C0BA7583F5043E1E8AF3A5F925
-:10001000A110EFE9138E468A2BBFB081C50F5F9008
-:1000200023DF8F56E2826B6274FBD6D7BF78E0BEC7
-:10003000E6F175F1343FC6A1A11B055F5D5723F3BF
-:10004000F72763846F64B785EE9B540AFAFB2C4F45
-:10005000C4C07D99D64E23BE93A2D8557CBE5DDC2C
-:10006000DFD6F58A8871A2F52D7B90BFEBF9473575
-:100070003F47D18F77231F6F751B931F5D5BAD3E8D
-:100080000B85D3B5FB4DA4EBEACD9D18A7BABF797C
-:100090009BB14375FE0CF2C3A71A7FD76BBBC62278
-:1000A0003FE7EFA2E9FBD9CAF9638D3F723F359B69
-:1000B0002F6AFAA9F0B618ED96BEFB3B27B9EE05FC
-:1000C00078E7DA991E75AE459CE68BD0FFCF626467
-:1000D0006E5737323F3895A3F83E9C95BD0727DA17
-:1000E000A2512F5B669D740CDE215D6635625CCC8F
-:1000F000CA3A1E47F3236732ACF74AEBED04C6BB9E
-:100100001AF0ABB2EF65BB9B803E27271765AACFDD
-:100110006194F11B0718884FBD8FADD306827D4ACD
-:1001200024EF5018C79D697F95402EB67B987F9F1E
-:100130005C3D3102BEB74BF67D09146E7BBEE00418
-:10014000D76C4FBA67F0437E0697F61D5DBC5347E8
-:10015000E777C969403DD16A08D86915628D6A4F51
-:100160004603D7411C52125EA5C07889C73CE611F0
-:10017000703FD446A8DA0AF59C92E65D95D849927C
-:10018000EE9D15727804A5570BA757C55F6765FFED
-:10019000A6703BF0FD96B80C5207E4BBD6EA467D4C
-:1001A000E2299B0BEF3FD2DF6888938827D14EF579
-:1001B000BB50B45FCD7D3BDAAF261FE7D2E613A676
-:1001C000492723C99B043E8E02D18278889B6AE02E
-:1001D000FAB2AB70645278DC7189C41980F23B2C9E
-:1001E000788F806E2FAF7A1E168B76DC747C1A3E69
-:1001F000119BD1E135B0716ABEDB8903DF47A7E30C
-:100200003DAE1BAF266FB5707E271109F89DC5DC8A
-:100210004E38FE2F69F0BD4A2A8A4F224C64C238FC
-:10022000E93021DE2596CF83F6AFA96F07EF01EB0A
-:100230005F0B870CB5ABEFB5DEC0E5E0114B518A23
-:1002400085EE93ACE1B518B89D9D2CB84E4EA065D7
-:10025000FE01C89FD296E7615C8AD0C8E86AC45A9A
-:1002600082FB664490C755AD8A463DD56426DEA81C
-:10027000F1703F8E78E5F1D08B8F9F3F395618286B
-:1002800028690DA535DACE1FCC352CA68BD00245BA
-:1002900014FE108B6B0CF45F3FC39D6C1807D31BCF
-:1002A00056BF7728EEDA6BC16368A81BBAFFC0148B
-:1002B0006421F82E08F10EDD0F72B851C953C60E35
-:1002C000EF06344687F22E33E5F78D692C7FF3DA9B
-:1002D000A1F5F07E4DA7BDE8660B8CC76CBF0ECFB5
-:1002E000C302F19AF7D57B932FCA38476F0CE4C14C
-:1002F000FBC7B707D9FBC523ADA17BFC288F3759B6
-:10030000947C00ED8BA2D643C8D7AA5A0E61B901DE
-:10031000F2341D9E10C81B42E779BF654C41F2B50F
-:10032000145E6B71323CC1B1D03266BFA4C1C3B898
-:10033000FABDD9613C482B6ED0E1E186AF85878557
-:100340006B6FA887F755FA3B6F4A170B005FD373A3
-:100350000CF88EDBC46316F4BFD05F14CA230E679B
-:10036000432FF7BC153B85C22957D397D24EA1AB7B
-:10037000DEE8269DD8AF63EF836AE9E7DF2DAE871D
-:1003800000DE328B2BDD9688F3C77705A6BB8B8BFF
-:10039000F213C2744D2CEE09F0AEFE11CB821F5A3F
-:1003A00054FEDAE9394BC5343ADE1F0123B8313C3B
-:1003B0009FC4E5DEA851749E892E03C6D51FB1B82F
-:1003C00057403BDB9C600062CB2612F704410CF7E0
-:1003D000A3EC8FFA1DCC8EAF2F36F856B0F360FC2D
-:1003E000BB1D61FAE8D0D14790D1475B27D247B512
-:1003F000BF93D1475B5D6E343F57033BBA9104C74F
-:10040000C1BA37590A0BA461946E6282F54037B2C3
-:10041000F7B682C228C4EB3A185F8FF5E1E352E6E3
-:10042000D5DBFA361E48FB7106D899070D781EA653
-:10043000E04DA9B7C3C2E246FFCDE67E11FAA99905
-:10044000D4B11F966FEB813F605C87EDE0CC5DD04F
-:10045000DE369BAE9023DC6FE3C115F84E78237F28
-:10046000D73B9604BD20D77BC707DB3F217C80DECE
-:100470009301F8E8C4FDF20ABF6796DD26B840CEC6
-:100480000F8F61EF90BC6E6176F5BB1691A74CAFF4
-:10049000493CB85B04FB2B7B9501EB27429AA19E5C
-:1004A000FF2A5E5FD2F8DD957555E88972D218781B
-:1004B000CFE4F978F71E2DFDC4C7A4A9E029ED1EED
-:1004C000F790A245945026EE5DF010C8554A3F3E85
-:1004D0004DBB317214E02D443F943E23AD0F6D7738
-:1004E00088AD6B7C0CE80B5BF62E15F15D8E7EAE55
-:1004F0006B16BC4749EB67C590DAADB47D562C4D01
-:10050000219FC0F303797E084BD33F741A04FA7D10
-:1005100003F7CB9EE5782592FDBA996320CFF4B816
-:10052000ECE418940BCABE856754E05C5BE2E7DB41
-:1005300069C13403AC9BB28FA5A02160A5422B4DAD
-:10054000721820CEE15D8FBB08CE0B7BE33BB75F1B
-:10055000CBEE81EABF7FCEC7F38DF5EBBFF4B82FAA
-:10056000FE39E0B7CADCF1F84C9AAFBEF632FA6950
-:1005700057C454DFFC55EF68E8C7FFEED5DFC40071
-:100580001DFA3F3345BC3F35CECAE8F180670EB651
-:10059000CBE2EF0492814A1CB22ACE15CAB85E861D
-:1005A0004B9986DF51CFBA055920ACA7578A87F6F9
-:1005B00031A978AE78AB2EAE55392FBB25C0FC8063
-:1005C00059B1BE42ECEFFA74F6F7493E63FA9299DC
-:1005D000FE0FCEA1A6F27333D731FB5E1087590907
-:1005E0008DF9083F3615FD5A3944FBFE41D640AF20
-:1005F0006480F2F454849767D695A713F45B916BEB
-:10060000AEC3F94D252AFD0CE546A313F8F1F4D14C
-:1006100094FEF9F7CBF4BFE126327F86CACEB8CD7F
-:10062000715F51BE466F69C477857EFBB9383F5212
-:10063000FCC563213C1715413C801E8FB90E6195A6
-:10064000D5D113DF7AFCE9F1ADE0518FB79C0F9D56
-:10065000F9F18E9EF8D1E3237C7EE95B0BEB3075DC
-:10066000B488F24BC17B4FFCB0F5FAEDB5B49E00F7
-:10067000F442F10DF84C1730BE272B86D34F6C3A5D
-:10068000E2370B14C001480F98D7E3558FC7AC046D
-:10069000DE3E81D5DF0FF81A89FC00ED2165DDB261
-:1006A000D26BF7C641DEC4E84CD1ABA772BC50BDDB
-:1006B0001AF5E6BC442BFA9B40AF9E9A14C65B5ECB
-:1006C000151B57DE48CB0B609FFE0AFCD1B1080614
-:1006D000DFC5BC95F05FE0563C5FCAE25905DFB765
-:1006E0007EA6D593A7FA0BCE82FE3DDCE45E6505BF
-:1006F0007F8C1087E77914FFC775F8D7B6B36BF313
-:100700007A7CFC0AFE31B927DE147AABB372FD7C29
-:1007100030190AFAF2D8373363817F137F7C44BFE4
-:10072000C4C4634521389C6E919E05E20E7DB7A737
-:100730007F0B3E76904A49151FBB5372AFB3DED88C
-:10074000938F29EB3585AFC714E2DD057EA62944DA
-:10075000FA4BC81E480DCFFF792BF7B30D2143602C
-:100760009E5F581C8CFFF37986E64DD54BE83F9B86
-:10077000F79F6DB6E0FD1B1294BA42784EC3F79313
-:10078000BCC6F8F0386465BD536A09D3E7E6E2FBFE
-:10079000D9142FE4CB98F038B6590509DF0FE2E3FE
-:1007A00038DF6CF6429CDBD392FB0D2BF83D848343
-:1007B00063717E526014C83F7DF9E5B6BDD5504ED9
-:1007C000EB95603D3EFE0A91F91F823B4CBE1752ED
-:1007D0007BD753E9F64639A1D07136DC7BBD01E801
-:1007E0003E28C2B8FDFC5C65E74576CFC145ECAB61
-:1007F000AEA7F0F65D62F702F228DB817A7AFAEDB5
-:100800008B4EF349701EB4D3D3AB22CF1BF8FD5BE4
-:10081000453FBB6875BF0FEBDEC0EFE3FA2F8EBA22
-:100820000ED6E71BD3D5612D5D29F444E9EB38F4EE
-:10083000D39DF9F13A50CBDFCBBC9C04F251D1E30C
-:10084000C3FA8AEB63A8D79B3E3FDCE6EEB27E8517
-:100850003EAFE8357DD92364AF4446D371CEE3EB98
-:1008600033D7DC2EB38BC6418CD36F8856DECB7367
-:1008700044833E39AF21ED95663857AC637EF90766
-:100880006B658D3DEC86DBBED89EBD673B7FB9B600
-:10089000FC238AEF41F1F8CEADD68E86FD91147E11
-:1008A000CFB767BF062FC8C97923A3317E4EDFAF0C
-:1008B0007E7EFA7EF5FD3570FBAAC1D838DAA9D262
-:1008C0004FEC3616477D69CD93CDF0145E6FF8730B
-:1008D0009B87B8D47F6FAEA3217A4EA4F7681478B3
-:1008E0000ABEE7C2CB98E00FA895FF1EE99DDD6C1C
-:1008F00037F313F4D6EF88603EEA8386A70322E835
-:10090000F5238204F5F0ECA0CBB050630F307BB937
-:10091000873D00EFA4D07C65EB2E660FB4D4A15DBB
-:100920005149ED0A903B1BE01D90C17C401968279E
-:1009300084EC5E88AFCA867732B95D0C4FA7A537C5
-:10094000B2FA331F4F37358C00BBD59D0C2F93CE99
-:10095000B45DFBA899DA57F5A9248A50FBAAC8769A
-:10096000ED77D64EA2DC3BDE25C0BBA434FFA865E4
-:1009700072FFEDEC99B6D18F82BF81DA67B7D95497
-:10098000766F6FFBE3669B03F1D9DBFEE8B417CD0E
-:1009900004388ADF82F221E407FE28BEFFA342F476
-:1009A000170B7853E8E5F6E50BD1CE88BAE66A0A6C
-:1009B000C49365733A70DBB85F3686C1A9896170EC
-:1009C000264A6E37F4D3BDFBEA28F03BBF3BFA045E
-:1009D000DA797E2BF3DB1FF49415A9E3DB6B6D0250
-:1009E000A797C010D87F77DCB82701EC956C59C069
-:1009F000F74EFDB2EFE9F199C09F66DB57D2296649
-:100A00004F36E2FD327F5460C8C32A3DCECFDF4D62
-:100A1000F55FDC3F441DFFDC6ECDABB531F822C085
-:100A2000CFCEDC7B0CF480DEE44E58AEB804902BC5
-:100A3000E4EAA1243C5F6ADD67039F68177FE7E073
-:100A40007CEB9EA40534ADDAF29F36B0E3EA383E83
-:100A5000CE4BEDF85E53E57611DF13A1FD263D0088
-:100A60007EEBD68559ECDE1FBBAFA6C8D5F19FEF54
-:100A70001952C49C8978FF4CD137A798BD3E189F66
-:100A8000BF8EFD1DCC29BAF7C96EE5EF93E9F5CF0E
-:100A9000676CB2E22FC3F8A96576D64F6FFB2BFBCC
-:100AA000B304E253EDBF6C2920C2F8B33F4BC2EF51
-:100AB000E70FA43D5508F63D919D2301AC44F6A2F5
-:100AC0007ECBCFA7E86F2FBC7BBE9367DE6EBD3CAD
-:100AD000EB66246E2AD704D0C7DC0398D391C907EC
-:100AE00045FFBBF533ADDF55AF072B7232D73F6EF5
-:100AF000D510027877CCC2FB1307248CF7D2EBC950
-:100B0000538305BDE8C34F207D6D6D4D8F017BFE86
-:100B1000DF609F00DDB65EC6F783AA49E01E78C796
-:100B2000A9BA55B40760FC24F37AD8678A3EA1E0DD
-:100B3000A5EDEA1EF358DA7FF645837D0505F176CB
-:100B4000F02F68574FF8FDC1049067FEA084E707B7
-:100B5000D917F7C62C54F145FF55037E7FFBEA6E8B
-:100B6000EDF760FCF5D06E8B81D9CB7BF7FF3D06AE
-:100B7000F8D4DB572F21BC903ED1536F46FD3BCFBD
-:100B80002A86FCD16ABD9988D98721DE6B6A2C152B
-:100B90006B42EFFA70CE87649595F4D42B42782798
-:100BA0002E09F0D0431F56F0ACD3333EB2713D77DF
-:100BB00018190FEF5EB65D4DA8C07BC7FE18FB0A83
-:100BC00094CF4C8FEADE7BEEC9E9F0FDA0C8DE9D34
-:100BD000B82AE27EDABDB36278876ADF524E8AEBCA
-:100BE0007665D0C50B6FD1FA57F64533FFBAE4BC32
-:100BF0005E7D4F225CDFC7F11518CCCEE9BC83E1E6
-:100C0000BDA86FACCF74F5B0F7FF61433D39580014
-:100C1000E262D4FA4E23ACFFBFD98A3E67FCA52519
-:100C200006F88B97E40E21B4DFB268920B7415AC12
-:100C30002376B033B61F3018605D3237A5625CCFC3
-:100C40002BFC1C73494BA3315545174BF839D81968
-:100C5000D99B12AFFABE3296F19733FBCA7F8171EE
-:100C60001D7F34919111F4D085B14CFE6E337AA77B
-:100C70006F867AC70D78DF68EFFE5FEF877793970F
-:100C80001C738C03BFE09458B60FDA0EBE520F717E
-:100C9000C16D1F82D4A2726663B168A0FDBE451CFF
-:100CA000CCAF7798FDBDD6903F94B812609E37C503
-:100CB00032BEFDD60183E6DCEC2DFEBEEFF5B18C35
-:100CC0000FA5C632BFDAD603B9090B70FFB947C406
-:100CD000821FF064473D6C45C50FA8E86F930F6F06
-:100CE0009D3E86FE737297C10ECBED38FC8208F3F1
-:100CF000759C21244E203DF4390A6FAC1ADE5B5DF1
-:100D00000C1E1DC76ED8AF0AFEA904FE7106CDBF2A
-:100D1000D52EC5433C98827F651E4AFF8E16E2DAC7
-:100D200060C1ADE4DAFA15FE68E5EF314CB013E5C9
-:100D3000EF33205D6EB7B96E89C5726F0AE4CFECF0
-:100D4000637AD2362E4F4972F170C09FB24EF3795A
-:100D5000AA8CA7B7FEEFE7E354D2AF4BD7AFC80ECC
-:100D60002FD2CD76164FEEF006CCE91077D6968EC0
-:100D70007F9F4A15977B3F8EFF8CF6FDC2B60E8390
-:100D800001EE8F55EF10E250DDEDA7BE1DA233A995
-:100D900005E9AFED18C17D5CDEFC5DE68FA4729FB6
-:100DA000BFEB86E7EBB07FF839FB2081A693FD1BF4
-:100DB000560E41FC066CB0AFC278A2FB06D2DA46F2
-:100DC00023D0EB92652C2DE5E7D54B9ADCB83F4B51
-:100DD000D6B378C465B1A94C3E737A2586E8C1F8CC
-:100DE000DEBA4D7B8FF01F5C7E9E6D7D6A0FF44BEB
-:100DF000E9EBFB808F9BDA9E5807C355E8F5EC467C
-:100E000019E194456BCFF33DB1CCCFB8FD30A3F7DA
-:100E1000C91BE55C784F6CB297D8C1BFFDD6C64DF3
-:100E200022F0EFB7809E53D93E07797B66DF6331AE
-:100E3000DF07F9D66920E047DF6624655B54FB6273
-:100E4000EF863734FBB7BCB96E3AFAEB3BE205E00C
-:100E5000F3CABE55F0BECDE8BC0DF7FF9DBAFD9FAD
-:100E6000CFDAB7C2BAD07A4FF1FDFFD434BAFFE976
-:100E7000A7B88D7102C0D9668CFCCEDC4BDF90FE2A
-:100E8000427CB5A3075F7D2996F91F6CE9B4FFEAA0
-:100E90003B2EA1FF21343E4E374FE52B74932A00A1
-:100EA000FE1BE90A8E007C51BC023D533D7AFECC0C
-:100EB0000CDC9507243CFFE1E74B3C2E0477946A59
-:100EC000BF86F999B26FDD6FC038B2F26B57829E60
-:100ED0009F50E845FA3C2BB887C753797616F671D0
-:100EE000047EB08EE3E38AECEEEB7DFFC140CF657C
-:100EF000D46284F990F5821DD6452977AC67EFBDA1
-:100F00001EE6F094EF87BF2DBE833DDE213DCCF081
-:100F10001D34425CEB281F936344C8C5FD400CB7E9
-:100F20000F867DB684CAAFFB55F2EBACDC8874AAA1
-:100F3000E0E123CEB7AEC4B1793FCEC7E9071F5D6C
-:100F4000A20AFF8224096C3F8B02DBE722C03FBB71
-:100F5000EFA6DB90DEEF884CEF76B0B7E2E1EF472B
-:100F60006D40FA8C9B66C77B2F4F49CEA8388D7E8B
-:100F7000E4C374EFA667D0CE03FA85FDDE1BFD97B0
-:100F800001FD930874EFA374AF5A3F850E285DFCF2
-:100F90001DF0A57CD7D385720EA9E0659BEE1C736E
-:100FA000AA9DE1E9FF00528D6EB5008000000000AF
-:100FB0001F8B08000000000000FFBD7D097C54D598
-:100FC000D5F87DF366C93233994C76B230490CA01E
-:100FD0002C0E4980B0D84E08204A88C352D7A0931F
-:100FE00000094B36109556948120068B18152DB6A6
-:100FF000208385EF431B6D10A858832610112D62A6
-:10100000DCB17FA54190454122A81FED87F53BE764
-:10101000DC7B33336F26026AFFE1C7EFE6DE77DF62
-:101020005DCE7ECF39F7C56ED3313684310763AEDE
-:10103000E6018C7D8F3FBFF4978C2DA1E77337CFEE
-:101040005E712482D1CFF7F0BFBA795E50BD76C70A
-:10105000AF571CE9E7AFCFC55F52E0FF71A66789C4
-:101060008C55F147AC4CEF89B525C0FB119DD66C72
-:1010700098B466E2196384039F781983F66F631C42
-:10108000543EAA6FDED32B1FCA31CCE985A6399B0B
-:1010900033158F99B105361BAD67F927D393DDB0B2
-:1010A000DE46C6C6E3BA9BC57C72DDD93685C699D5
-:1010B000E029738F898367664F9E7BA0FFF90766DF
-:1010C0004F966D88BF3EA170BEEA18404B8CC47E1F
-:1010D0006355980CE69FBFC9E4336532B6059FC4DB
-:1010E000C32ADBA37C9B32FDEFD9F4CCA5B73396A2
-:1010F0006BCBA475C1EA5AB1EE58686497C1BCDFE6
-:101100006696B59BE1D1D51DDEE281B08F2D46EF0D
-:10111000D489993898F31A1CFF9A629DED01586A98
-:10112000ACCBA63807D092695EB68FCF9397EDEC23
-:10113000CFB2A1EE70E6B92D8C8D12F862AD30C938
-:10114000703F1C42F1C6E1D9135E17207C86501710
-:101150007A7EE2D5A81B7D66FFF34401BF2F63783A
-:10116000F9ADC1D3DB660E1D27603E554966CCCA7A
-:101170003C4B555CFF2866DBE4F03F778C622E1C0D
-:101180007F9A1857B6CBFA8FA6AFAE10FA9A867828
-:10119000AD8EE822BAEA53D06974C0BC4C19DD8B1D
-:1011A000C1FA98EEDA5EAC80BAEA71BD0048552902
-:1011B000E0EBC7F6848D33D7239ED90113CBC90C3E
-:1011C000DD67B5CDC0E1B6D130FA66E897E065B825
-:1011D00003C08B83E38535DE8AF86BDC686288D7D1
-:1011E0006F6339DCAC53D96803F4B7427F24F7C688
-:1011F000A99E035741BD31D9E850609E13862EC287
-:10120000FB89ABA08DE8C3AD20BE4FBC3AE29ADFAC
-:1012100040BB77A28EE5C08B5B8DB005A4C3BFA792
-:10122000F9362948A72DC427F3C7B2C12678DEBEF8
-:101230006918D1D5ACE22C05E976CEE658059FDBDE
-:10124000C7D8742AF3EF63D84295E813F8A0DE16E6
-:10125000808F61DE3A15E1D53BCE936C8865EC1149
-:10126000DB35E323D281CE3259241BCCD843505FE7
-:1012700009706BB4BB14164BF506730AF121632396
-:1012800008AEAD0CF0D418D55D774560FF2C5E7FBD
-:10129000A4F1EA868634C69E897135229E3E30BB13
-:1012A0001FC1F98726D5A944E782AE7F80CE7E1282
-:1012B000BDD42E2C6287F3E0F70E660EA41B904778
-:1012C000B76E06F895E83D9B705D35BD8E3E8EC3CA
-:1012D000D5B67C65F484A17BB98E782117D8C78CEC
-:1012E000F011EFAE53CBCD7EB9B3C566174CED52BE
-:1012F000265BFCFC8672EB7933973B59509A229817
-:10130000D762C77E3EA223ACC7E4FAE5D1CA62DD4C
-:10131000785F183E7E0D89EB6794CFACE57FFFF2D6
-:101320009BA1D01F7F57899F5EE3FCC4E5F5A3C551
-:101330009F26223C9093F0BDDBC51CEB973ADFEA79
-:101340008B74B95F659BA03ED864F42A31B86DE612
-:10135000B0258AF1900D5B9456CB20A8FF4B612EEF
-:10136000C0C3E97FA954AEBFD73D3E13DEAFD9A1BC
-:10137000732E857E352D0AF183B337F345001D3773
-:101380004759073118AF70B7D96580F6D34A04C9F9
-:10139000659C00D76190EB2FE8CA6882E7F52DC005
-:1013A0007F503D5D08A8C6F5EA9D316C801FBE8365
-:1013B000DE7CB41FEC00DA1B9DC8674F45F2F19F3D
-:1013C0008ACCF081108352BEE788014A6159826E4F
-:1013D000F47AC662004F5078B11CB530DBA5073CEB
-:1013E0002B7AE63500BE4675B5AA089FAC2E878ECF
-:1013F00099FDF3E9BB18ED3B4BEFD03903F4D5D69B
-:10140000BDCFAB7A80EBD0318DF52A9489319E6FB8
-:1014100010DE2346D5D5637B5CB157F540FF7CA534
-:101420006EB705E9EC1AE644B92AF924AE93B5C1C2
-:101430007259EC814E9715DA471C77B50D80FDC7C0
-:10144000B89982E349FD0D7CC662910EE35DCA4402
-:101450001867E83F18C1478EB375EF6805F93EBEBF
-:10146000638CE218104AE76B98E3B738AE779FCEEB
-:1014700089F8753433D70694137FBA620CC24BF6E1
-:10148000EF1DCBF5CA488FA7084415EE2706E71DC8
-:101490007EA36FB701D6336C9677B7D111B09FD9C1
-:1014A0008CC64BEDF4D23E520E780AB1CCB6C6D201
-:1014B00038238EB7B60D807E4975B01F684FEF7820
-:1014C0004F41B8A6D7752888CFAD7B77D17AD33A6C
-:1014D000DA7929F8EB79611774DB03561DED23DB0C
-:1014E000CAF5CDF2535C6F66C77AB2AD09FE7D2CAA
-:1014F0002FF424D7C1F86BF66675EF17E5EE952843
-:10150000E403E4526EAC91C6B9CBEAE98FFBABBD04
-:10151000B1730FD2E0F37BDFB1127FB4C4137E133B
-:10152000F77D4AF8485C48BA98ADD9375F4179B140
-:10153000A61470A684C259CA8D35B87EA21F5BF46A
-:1015400024A0CF27ED9E82D8407BA5CC1E9D1520E0
-:1015500097E47B8F2F66EE19B09061EDE55B59162D
-:10156000C9F77EB101F27DC2C0FB22919E9A2C2E5A
-:1015700017B69F56D88D38CF335842FB33065E9747
-:10158000F07A40E0333B7652B6750887930DE8F861
-:101590009948DE4F2B8FEE8DD509BB83D30BEBE043
-:1015A000F482FB08B4BF66C6723C8C74798AF49CE2
-:1015B0004EA6E2FE8617F87623DD0E1BEFDD8DF4D6
-:1015C0009FCE049D8CE774A2A5F7DB63B97C1D71E7
-:1015D000BC8B21DCF315E60E67EF54C672BB29BE47
-:1015E0006334D10FF04319CE3734B54E35A0DC66E5
-:1015F000B609A87F7E13EBA07E7905AEDD486F3675
-:10160000979BF879BED9C6E92693D307BC3F271C20
-:101610003F6D433E1AE0E7A378A44773283DDE26DA
-:10162000E0F41B01DFD0F13D77E1F8F11D3A9702BC
-:10163000830C3B60F631E83A6C01E849E45306F468
-:101640000F0BB4CFB215229FA5563915C4EB02B3C8
-:10165000FB1EDCD772948DF948CF3A5F3DBC976C86
-:101660007311FE7EB49E6867116C68909DF5402CE6
-:10167000B7E35795A1BC7EFA5B23CA5387E4BFBD8D
-:10168000B9D1E501F4F1C7507C3F120EDF5A39A7FA
-:10169000C5B75F2E04CB3980D75A8E0F6EE7C77758
-:1016A0002C50B97C08966B3DE123443E083CFCC1BC
-:1016B000ECDA84EBCCC64540E91DCDFA617B4FFAEC
-:1016C000F8C558F34FB3672FAC8F5F8C4D08D5C763
-:1016D000BA88AED7158047758BEA50610BF58BEC55
-:1016E0002EC4FFFA66C58976E1EE1695E861FDF233
-:1016F00028D29B72BD5F6E8F19C4AE8452F03F6BCF
-:101700008F257D5A1B2BE65F06BFC0FCA76DBCBAB8
-:10171000DDE6793D500EAD6FF92612E1DC3F5971DF
-:101720001D41BB4AAB8F81851478DF84BF2908D760
-:10173000C10D2A32D6F59EAD2695F0F62E8E378C49
-:1017400075BE330AD6F5A7A6D1BA407BEBEC8EAFB7
-:101750006FDD05EBAF8DE6FAB9369AEBE7D3BBCE7A
-:10176000F7417ABB76E174927BC3F49E8F03E5DC8C
-:101770001BFD0E7339CC4A6D47FBE3D42EE5FB68A5
-:1017800000A135A29F1EED0A35CAA906DB15441C2F
-:10179000F539001F845F5B14C1AF3E07F82E93D666
-:1017A0007902D7D96E31B214683F0BFC88FDE4BAD8
-:1017B0007FC47ACF845F6F9AED68B4A00BD5BFBEAB
-:1017C0006EBC201E607CD5A2A77D9C66514EC4676E
-:1017D000B3D1C510FFDE83C23E1078AB113477BAA7
-:1017E00065C8010FEC6FFD813427BE7F7AC7D948E9
-:1017F0009D19ED478F6A877DA9E95D56D487BB5B4C
-:10180000CE5EDE3980E49BC10EEB3BBBEFB0DD3337
-:10181000E047EDCF6ABF88FDD5EACD0D817622AADB
-:101820005952941A3A525ADAFEA90C22FE63280F32
-:10183000BD19CC570FFB5E3E50D0D354E640BED707
-:10184000E27BBBCD9D610FE0DBCD36B703D785F3DF
-:10185000A4E6D23EB3B03EE8CDE979061DEE6F0CAA
-:1018600043BD29ED3DB94FB4C72373FDFB93F65E2D
-:10187000F7FE73CE0FDAC768DF83EC740E742CC5E5
-:10188000735A2D2885073203F7DF4A78A916FBAC77
-:101890008E30B7AAB02FB6CD70B253CA83ACD07D0C
-:1018A000009E86F37D380F7810CF7F373BEB114ECB
-:1018B000FA0E1BDAAFB0AF91B80F5650968C70F895
-:1018C000C0EC9A8CF2FE99258CE8FAF4B3CCF714AC
-:1018D0006C7A4BBB8EE86603BB82E8FF0ADD995B3E
-:1018E000DD66E2EBB1F87E7E47A30EE56F8ECFA1F9
-:1018F00043B97A7947B34E47F4E0192FE074560F95
-:10190000EBEBDF54A7FE48BA98149E2E42F0F6ABDC
-:1019100040BC49B88D12F4300AE18632B94B7FB22F
-:1019200033C20F37C00B4BB5878EC7586706C2A9A5
-:10193000EDC5637D3A61BC9A978FDD8A70A9F9ABDA
-:10194000898861CC5F2F8F41BAFFB230BC5D737262
-:10195000719D5B0FC478AB3D8BE47B15EB30A2BD72
-:101960000072DDAD0F90EBD28EDB67E828C6F1F791
-:101970000D51D91280F359E7B02416465FC8723F63
-:10198000DA6D39007FF455E1F9E4C5FC186E47DAE9
-:1019900083FC5AB2DCB778967B8CA1E7F1F60D8E0A
-:1019A000247F4EB1C61E7AC8CEED8DA7ED5CCF81E7
-:1019B0006076E13A4FFDC5E2F342D3A9DCF7AD0C06
-:1019C000E0746ADBBB795EA0A353ACE3F69790DFCB
-:1019D000BE36D3B9AE78F0FB794B2C7EFEBC8AFBC9
-:1019E00052D8552FBC697540FFE22DBBE3BD01F015
-:1019F000BB8AE9BFEEA6EB4C9C97EF8FE93BFB203F
-:101A00003ED84B27121D5016BFF86A3CA703383743
-:101A10000D45FF14E78F3F635380DD5DBCB0C63DCD
-:101A2000262FC01F732E92F902EBFA0E231E89ABEC
-:101A3000CF99A9FD76BB259EE44D2FD60BE54D8FA2
-:101A4000F0BA48786ADB253CF70D3E9181F6C597E0
-:101A50003DD8C507ECC17EAF37167BDC6372FCF561
-:101A6000BF7DA7DEE60EF35E8B18FFAC737812DA4B
-:101A70007DC5C6D6CBC2F9E1E439530BA737CE57A3
-:101A800046E3B87F39671A1F6E5DDBEDBA9FE63F0C
-:101A9000D807AB0AB00B4BF49E37EDDC5FB06A326F
-:101AA000D46B2E3F3B8ECED9925E84DCBB8A79DB31
-:101AB000907FB5F421F1FDBEC45B2A4B45BC3D6966
-:101AC0007770BA11FC20F9430B476D39C1C83CE16E
-:101AD000CE03CF75C3359279411EDEBEC1407AFE7A
-:101AE000CDF31F4ECD037A3FB6D6605B0A53CE5A74
-:101AF000B73BED51F4A70D36D914A81F73B45E8619
-:101B00007C5FB94E75233D1C5B7B7BE27428BF0074
-:101B1000FEAD8275546E3050FBAC0D7750FB09C1A1
-:101B2000D795EB12FAA3BC7CB3FD8144C4E3ACEFC0
-:101B3000EEBF1EF1B2C568EB3F18CAAA26C53D2606
-:101B400000DE73364606D5B7E8D82CDC87C42B53A5
-:101B50003CDDCF1DB01E63DC4FC4636B881FD518FE
-:101B6000C7EDCC9229B0EF9A2167C9BEDFBD278AA5
-:101B7000F4C92B6695ECC8D6C1FFF3B72BA15EF470
-:101B80009DDE49369EC0F358816786CE40A08F8A7D
-:101B9000085E2F7A514F766891452578B7825C1D93
-:101BA000434ADE651E0BFD7E21DF5347AD1E0EFD51
-:101BB000C6C61818EAA15FB4CE2966A0277F794E61
-:101BC000FF6967C07E4633971EEDE24266086A5F92
-:101BD00011657D0AED5A184C8FFAB02822F8F9D811
-:101BE000CBAE3D81F6C4585B70BBA4BF9C38A0BF90
-:101BF000FE7EB9B17BCFE78F4C807D56EC53C99EFA
-:101C0000BE905CDE8FFBCA417CBF51DA04EFBD2978
-:101C1000A0F3E6F963CB5290BE0A14867EAE63E76A
-:101C2000C3F3E55C419F8C019EFBF9F13CD139BBCC
-:101C3000BB8E6C7F5DC1BCEE3AAEFFE2E5D90FCB47
-:101C4000AB4E3BF76F68F587967FFE53FAA378F0AB
-:101C5000AB195E0B95FF85E5C92D5CFE6AE58556DF
-:101C60005FC87569D75B7D4E0DD213CF0979E2D776
-:101C700017467AFE339E8F6BE286849E8FC19E212B
-:101C8000787987EAE95C0E76D7EDD86F80D911575D
-:101C9000084B5A66CB8A46B9D664F1DC1917E0972F
-:101CA000EADFD4A843F9D1EDAF3104FB6DE4F9F5D7
-:101CB0009E38BEFFF2385E87F32B9DFB3744799246
-:101CC000F5386F2FA333307E25CBFB85FC9076AFA4
-:101CD000B477A59D2BED597D03B767B363DD417ED6
-:101CE00033D6AF5F903F18ED74E473EFAE28DAE7B8
-:101CF000678A7B10F26915733D1417A007EB0D7C02
-:101D0000FDDAF5BC1627EC13E6263B41B6CF1C1DC9
-:101D10005E9E6F8DD353FFC2C76FCA403BEEB3B612
-:101D20009B3350CE7EA6F1FFF6C40F0F0B7E7D5085
-:101D3000E89358E1277808F908EAC0EDAE2DF0FEE7
-:101D40008AC56EE2ABDF2EBE91CA47172FA4E78F7C
-:101D5000C565D2FCB6C277DCD900A7232B55D217B4
-:101D6000338DEE3EB1F0DE91081DF91B0ED799C7F9
-:101D70006F33633BA3F3E5CCC7276CF206F8011F72
-:101D8000C37D0CE9799FAF09BC5E2A9D56B34E2BEB
-:101D9000EAAD6E7A3D10A2B7DB112FA7596722F684
-:101DA000AB553AFA3429A1F33FC85CAF61BF662353
-:101DB000EB8F7CD31CC5F592B6DF9B027FABD09E28
-:101DC00085F233D45F61E4CC3B825E7B5B5DEFC424
-:101DD00091BC3393DD4EEB56294EF43ECE07E7B46B
-:101DE0000FF139C689D05F976DB575C755F879C7BA
-:101DF000FD715C187F5C4FFE1FED3AEE89E770D5F0
-:101E0000FA856429FD42C7C47E16C5D982FC44E820
-:101E10000F0FE70FBA3ADE48FBDB10D5E9C5B8A8CB
-:101E2000F7667E3E4F1AE555D0DF955ADC5888FE9E
-:101E3000B07FC6713FA67DBC2719CFF1BD928D4EF4
-:101E4000F4E35C2C3F0E6876F138814747EB58D3BA
-:101E5000E18DEC03EB4AECF0141AA134C426D2F85D
-:101E600049AC6E09E20DFA1130F2DBA37C8A3C74B6
-:101E700043973C214761A591C877DBAD1E533CBC1D
-:101E80003774465D3DFAED53AB783CE284E2E96D90
-:101E9000CF0E8D1BCB32395EF0AF88BBE66F34D0EE
-:101EA000BAF2373E46F1D1FC8D57EB950039941FBD
-:101EB0006FA0FE275E9DD39BFC181F858FBF0E88E9
-:101EC000E7F462461FE1108A8786A5BF7EF13F31A5
-:101ED000AEDC09F650B03CEF173F24206FA1FA0C9E
-:101EE000C9737D3CD7237FC07C0558D31F66C87C4F
-:101EF000850DE48FDD6A6CBE06E351DE1A1D43BC1E
-:101F0000B7EFF92BC56B67CD7050BCB6FBFD7DCF2D
-:101F10002CC7F63FCC628311FE29BE8715F4CF7C17
-:101F20001BC9E3C9DF6E32B125B0A5D96F37533C69
-:101F3000784D958EA17CD1EE1B6632E8785CDBA0F3
-:101F40002BE0F8473928F10E0464447C48BC21FC9E
-:101F5000B698316EFC02AD5FAECB807EF004DCC77C
-:101F6000966B904E7A55D915F417C8755D489F4CFD
-:101F70008AFF69FAE467D4C3B7C55F9C1E9E81746B
-:101F8000AED5C35AFDDB64715562BF0BE9E1134264
-:101F9000FE4D89D7C443307E16066FC7841C0CF0F3
-:101FA0008FDF19FF23FCE31FA11C09E31F7FC6C8B5
-:101FB000E56FA39DDD36290CBFBC27E6D7ADEE3219
-:101FC000A2FE8C6F51C2CAB36CAB51C61357E0FA74
-:101FD00064FC442B8FC3C0B711FB5FDED4BA0B7B0C
-:101FE000E5C65E168DE6DB15DFC3B937CC3C6B0466
-:101FF0009F3B16308AA33AEA18C92BA8FBB893B0C6
-:1020000095F223001F4FE0B8178A639DB615921D05
-:1020100024E35686D8E0F3F89E78D9CFF547C46F0D
-:102020007A0F7AE24F625DB0FF67B05FFC02161470
-:102030009F917199F83AAF62CC4775C4C8DFDA3B1B
-:10204000CEB304F33FBA8633E753508F29B515A2B8
-:102050003CB5CF72B661FC66F929EE9F5F3E8FF901
-:10206000962A0179059E2CCA0342BC05FA07760A16
-:10207000F9B653AC1BF4E45FE3F9BA5AE203F4A4F3
-:10208000C4876E75AB4A78ED0AAFA702F0DAFE435B
-:1020900078FD19F9F29D8BE4CB0F2F856EFE7191BF
-:1020A00074F34B8C6F0C093BDF678857ED7C4067FE
-:1020B0004783F8BE073ADB7889F1D2F9E69FA8A7F3
-:1020C00042E1FA5D7C42285C5716EBFA91BC6651FE
-:1020D000CE707AD59660FE4FE791D812865C7A1E54
-:1020E000C9FA7B3B8D8867190791EBD5E68FC8F657
-:1020F0009A16250FCF9F85BBCFD339E074DBBFE89D
-:102100001C109A07C2E79D0FE48DFC39561DD0DCE8
-:102110000AFC77A6C948277595397E370AFDF77BF3
-:102120000DCCE7A0FE11D8FF0AC6FB5FD1B4BC03FB
-:10213000FD575730BD579C4795EFB91D15837C7CE3
-:10214000C55E95F2BFD866FEBC8E452C41FF744C2F
-:10215000818E3902E019EB8A628E0078C68DB7074E
-:10216000D5E53979AE9837C1DD2BE8FDA41BB382E4
-:10217000FAA778AE087A9E3A2B37A89E5E3722A837
-:102180007FEF85A383EA99DE6B83FA67374C0EAA4B
-:10219000E734DE1CD4FF18AB7B7C14ECB33FFA5B56
-:1021A000003FCCEBEAB80CD63B43ACB7EF9AF2A0B9
-:1021B000F781FD5A311E385390C917CF8DDFAB0020
-:1021C0001C6708FFCEE5BE3941E3CF55AB887E677B
-:1021D000361A8E04FA69F4AC6B4F2AC0B9C6A73818
-:1021E0005BA15EB926F8F9EC1D1BE8BDD9BEE0F68F
-:1021F000B99B83EB83DE9CD29FE701B929BF72466E
-:1022000042B0DF8785D08999E4F499B5DCFFA57ADF
-:10221000FB6AE824185FEC27D28D43D08D293998CA
-:102220006E221DC17453F9FAD6A108072DFCA3FB39
-:1022300069E8C90BFF7E00FE1667307D69E14EFB41
-:10224000837556EC50D8EF9550B8CF6A7978792AD3
-:102250000B853B633E23D71FC1ED8F68E0FD81D91D
-:10226000F318CA89B33B16A8188763E3793CFFECDF
-:102270008EAF07ED7384892FE584C497D62504F8C3
-:102280007F647CE934C619AF64171167DCFD4F84A5
-:1022900007C8008F01F3110B9C11DD71C5487F3C0D
-:1022A000492B3F6509FAE3B904D22BFE786C3DBC9B
-:1022B0003D34E60337AE53C6E564BE8ECC2B0A939D
-:1022C0009FFC978404CC0FB447E3F9754BFB7C3A31
-:1022D00077C9BC2226F202C3D8FFA44F9AF1D714C3
-:1022E000B20B762670BDFE0A8ED76D1788BC2FA95B
-:1022F000D77B1A47C6DF7A2A955D2AC513BB942877
-:10230000E75361F4CA47093F51BF85E68F7F14A8A0
-:10231000476AEE38BB07F50BC0FD636CB758406FDA
-:102320002B7EBDFDBB682BD16BD7EBAAAF2F349CA6
-:102330008970C4D8018E2D22DFAF45E4FBC9F5D6E4
-:1023400045A4BAF479D81E9CFF27E38ADAFD8DC232
-:10235000FE71FE3ABC1764972CCFE576DB690187E6
-:102360000D166E271813B99D50AB391FD53670FB6B
-:102370000CA4D7AC9680718C8916EADFDF5C684CC0
-:10238000C47184DF6579A64276C57245217BE47706
-:10239000B6D1F4FCCF09858644E8FF6F31AF1160F8
-:1023A000886563165F8F439317FE92E8FF52C268F9
-:1023B0002A8D8936E17FB65D81F4916A7619A95D2F
-:1023C0000D1FA78A4EE4FB1A29F264B47180714292
-:1023D0006EA2DFDFC4EDD2E2B18941FEFEF78CF1DF
-:1023E000C2DFAFD0EB2E9453BF1478EFC9FFEFEAF2
-:1023F000676B47F1ADF5FFAF8CE4FE7F191F08F165
-:10240000FF3BC785F5FF231EA2ED7EFEE993D82D85
-:102410009FD2503EED307AEAF1FCD5B51DEC7868DC
-:10242000EEE7EBA4B8C0C07DD94E3C672DCF64BBAE
-:102430002C486F4B18433B7F47A76E69243C5FE9EC
-:1024400065367C3E7C2D3FBF55AE7138719B520E78
-:102450005C9DC8FD8706381F5B72F1BDC96D1827EA
-:10246000583995D9510D35B2C6222BDA456B59D85A
-:10247000F3E368414F130A7751FE764217CFB70F47
-:10248000EDA793767E21E2735897E72C8FCF717971
-:10249000422211CFA9ED3A5FB8737DB2ADE86AA4CC
-:1024A000AF81BEF0E78891C24FE632BB27E2F80366
-:1024B000B7F17CD84A297F67E8981EF03E45E07561
-:1024C000CA5A9ED7C1CE7FFFBD2AED4546E333945D
-:1024D0002B95532D3EF41355B6647A695D6EC599FC
-:1024E00083F2A2E56D37D62BF3F36DE89770FD9D6F
-:1024F0002947FB91A9C9B8FCD2B3A3529E901E8F65
-:10250000A738D464416F23F1B09C40727E6534C01B
-:10251000BB72ED925D98D7F3FE1F19C59B0EA85DA7
-:102520004371B05F017016E662A967A5E4B748A6DB
-:1025300071A68A71BCFF827923FCF3FEAAE575DAE5
-:10254000CF0103F346001D9DDE798303EDEEE5091F
-:1025500011E4CF9371DA83AAE73E5242FAAE1A5CD5
-:10256000DA4D2DD136F4839CDEF9613AC64D3EB981
-:10257000E7AC05EDD87FE8BB2C982F7C7CD1BB164F
-:1025800017C0F193452AE59DDD2AF48684FB7D89F9
-:102590001CEE1F27BA1721DC6F5BFCDDD0C03C2A84
-:1025A000B63081E879B64FA5905CB79CDD1C8D16DE
-:1025B0004A77BDBA392EA82EF540B589D5853BBFDF
-:1025C000BC24E86976D30663AA03E7F7AC42FA387D
-:1025D000AEE774747C9BC5E7CDF4AFA7BC69B011BE
-:1025E000ED837FB498582BEA337D8781E749BB8A16
-:1025F00015A00B8FC0BF769D7B5E8EA6F1663EC692
-:10260000E54719CCB510E0EB69994D7241BB8F9944
-:102610009F38C625015C67AE5018FAE3B0FF22C0B0
-:102620009F67E1FD5FA1FDA5DD679937580E48F969
-:102630005529F03CBD21F87965CB6F699C19CC43D5
-:1026400079206027699E5F730CF50AD84741ED67D2
-:10265000F6669B518F6F4914F1EDA16CD8F7F0FE2F
-:10266000AE88EC184F187E92E5C9C53622D6CF1732
-:102670004750797C31A3725122A7E3AA96B7EF4461
-:102680007BA966C716238E73C9F1819613D69B99D1
-:102690005FEF96E83DAF211ED92C25284E50B3E1BF
-:1026A000AC91EC32019F52D15E8AF0003CDCC21C3E
-:1026B000ABF13C505A65F0C7E9E0FF5B72BFC36005
-:1026C000BF80DAD1913917B55FB94FB96FF9BC5AEC
-:1026D000057A0CF3BEE48345421FCDD83869792FC3
-:1026E0000051FDCE63199DFCBC49F67891C06B5139
-:1026F000C4FD648F1785D8E3EC3DDCB7A4C74AE678
-:10270000243DA2A53B4907CC6CA0F72384BDDE4D38
-:102710006F2D0F125C243DCC5C5D68E4E69BC7C85E
-:10272000ED4A6FB2F0D726A3BF16E830C83E06BA0E
-:102730000BAA6BEDF12F0D9D19281FB476B8CCE7CD
-:10274000D4C2E76022CF5F9AE1708DB30DC0738071
-:102750007B39F985F146CA10E4DBC63D7723DF6E8D
-:10276000E47CF30F410FB3923C1149F0DCB3F49ACF
-:102770001AC47FE7125306F2B367698A1A0FFD3D48
-:10278000AB1492C3A397A61811CED3970D1E877CC6
-:102790009DCB5C34FEB43816D66E189CC4E54779E0
-:1027A0009D811963082946F40B9F6A50C82F8C9AA3
-:1027B0006422E06B96C057F58AB7ADA4AF1CF06FEA
-:1027C000285E1FE03FB3EA2A091F70EE08CBC7520C
-:1027D000AF54B166630A8C3B67651BD1319C47825D
-:1027E000FAD7B29584AFEA664D7BDDD5843FD8B980
-:1027F00011CF89B53B829FF74F127682933991BEF4
-:102800003D775A2230AF71B4804FD94AC586726B7A
-:10281000FAB2B6841BA03E7DAFEA84ED74C387850F
-:10282000FA23281FEDCCDE1CF2579C713892B09F22
-:10283000C7CAED5245EF1986EDD3E23CC3D0CFD8DD
-:10284000F59185617EDFA1732A73E411950FA2FCD7
-:102850002A1B1B3429C0BE2F33D812311EE965F361
-:1028600093C53DB88840F8D446AC247EA8457E8800
-:10287000F0F3C3348C7BA1DDF3A24279846C473042
-:10288000BD9F703426C29190B9EF33909C2E6F8A11
-:10289000A5F371F9B22223EAD5F26DB1641FC1F933
-:1028A000F4BDCB86FAF1796859DE9E6418B7BC395D
-:1028B000D3A906E331F4DC19B0CE390D8724FE8E9E
-:1028C000F480BF23E1F007780B6A2F4F127249E0C2
-:1028D0008D2D8A23BD5A3AEFD59C0858D799BA480E
-:1028E000CA93ECE97CC4668CA0FC03E9BF1ADFAB99
-:1028F000DBCF44793E67570E21FC69F136FEDFD30A
-:1029000087A1BDCBFE6E6168674DCB66B74D86F67D
-:10291000DB14CE6FD3EAAF198F76C4DD495C9EBD60
-:102920000572D0D597B1B7410EBA400EBE0BF21169
-:10293000EBEF2F4EA6FA878B1D547EB4B81F954738
-:1029400084BF5FF21D1002D1ED92242E179724C987
-:10295000F8FA82643469C6FFFBDD213A1BDE676C3E
-:102960009B30369DB1EB5CC1FAF7C6A9C1FAB5D36D
-:10297000601B978CE7DB150AD9A3E5EE9141FDE1D9
-:10298000DC64C47B2BAC5F9EBF9DF486C33819E822
-:10299000F1A6E2B8A0FED737A406D59F4872D0FAB8
-:1029A000268DCF0E6ABFB9B47F50BDEC9C9131A487
-:1029B000774701F1CF0291670407778E171BEFFB72
-:1029C00075DDB0A4BB60BD5FEF33D0732D3E245ED8
-:1029D00067AC519907C69BBE06E41F2CF148E3740F
-:1029E000E2AF2F0E58E85CB2BC296F7F01D40F35DF
-:1029F00019280FE8D0B2B85568AF1D6A4AB032281E
-:102A00003DCB5561D7D88C2C40DE152D5B42F9A605
-:102A1000653E9393EC9776EF93B2EEC0F32A2E12B5
-:102A2000F9E43DD5D7AA10FE5C04DF6722E95EE138
-:102A300071B027F12AE1F44EBEAEE30A5B86F513CE
-:102A4000911FF7B90BD6716A6263850EFD15EABE58
-:102A500004929FCFAB0CE9B6749E81F20C66BFAFB7
-:102A60006EC03A53725339BE55CAA366CF98687C7C
-:102A7000D6051402FD163C6D7AEA01AEFF787DFBA7
-:102A800040DF03823E918E8EC732572C2D56A1F522
-:102A90007EFE76C2067CEE87A76F10EE7BBDC1FD81
-:102AA0006612E0EFF30ADF20926F8B1288AFB470EA
-:102AB0003F62E4F2CB8B7CA0F8E5A69FCF96927E96
-:102AC000986E70263A496EE5A7A0DC3AB2D24076FD
-:102AD00030D3BBAC93488F3E4F742CE739A2778C30
-:102AE000C3F51D69C864985F51BE52A5F30AD21F91
-:102AF000EFEFE3E7D487550FD824CCDBA07858520A
-:102B000028DDDC3E6F18E55D6AED6D597E09BCEA93
-:102B100009B04BE6ECE479812CBF533F7560E03E91
-:102B200096F1F93C0541F94A5559AF1D34EBC82ED1
-:102B30008CC173C289F754A2B313598D4393019F7B
-:102B40002775BB86DE05F52F267A8FEAA13E22DAAD
-:102B5000F32F84EB5CDDCA0C250BF3FA0FAF1A09D7
-:102B6000EF7DFEACC1496C2EECFC39CFCCEEFD43C1
-:102B7000F615D81BBDB8DDE14AC1FBCF731DCD1AD8
-:102B80007B80C3C78149200017DB6A056D377678E3
-:102B900088E5013C574FD7314FE079E0B0C8E3B149
-:102BA00024F373A8B41BA6247339335DC7E99BBD16
-:102BB000AC707A03FB2A500F48B93D17F3AA55BFF2
-:102BC0001E9072BB8A3552FE8A2399DB2FB3151FE4
-:102BD000D9DD35988902FD2B6C3C6856B5D9E4F3F4
-:102BE00065D298B640FB607A329727738CCF3E8EC1
-:102BF000E45BC93AF83E35FD3E37F82A3A3243F5F0
-:102C00004F856DC3323B8D6F70A29FB752F06B75CD
-:102C1000A3E26B253B85EB51E9579D29F4A8563F6C
-:102C200085E8258D3E9AA9D1BBAC3158CFC27AE94F
-:102C3000DEB25CAF769DEE680BC1610EAC0BF56F3A
-:102C400085C7B7A784D6AD3801A321EBA964EE31BF
-:102C5000B1B80F78DEEA085D9F765F21EB15FBD4F3
-:102C6000AEBBC2F9552BE6BB543529042FED3E24EB
-:102C70003EB4769CC44B8597C3B7A245217C7ED6D3
-:102C80006D1F32F26F4BBA61CDF02FE07D4947B036
-:102C9000AF12946F95AB411E6786D2D31CD66C459C
-:102CA000BAA961ADCB5390DF5A9BAF1F8E7E86B51C
-:102CB0006FD3F9A9D4DE9AA38B05507A73578EBFD0
-:102CC000CA4FE7178A27FC5CF0C3DDE9A59F1EE029
-:102CD0003573A3EA8A1C14D44FE43F7A098EB3BC3F
-:102CE0005E23FA6367093FE585D659ABE7F75F2EA8
-:102CF000B85E01CF9F7BDD0F27F76477853F17769E
-:102D0000DB5B1A3DFFB181FB5BA57CFE5AEF22FF26
-:102D10002EB40B3BACCEC6E37D1AB99E9E4F72BD5E
-:102D200042E87939CFD1355B295E3013ED8080F6EA
-:102D3000CF566FA578A5F1D99956B4CB8FAE99BE71
-:102D40000AF3528F364D27BD5FF97BA9F73DC64088
-:102D50007BA2684DD9FA7B908E3747525CB1A2DDD9
-:102D600023CE452067A19F630D97AB6C3597B39534
-:102D7000A81F07907EEC8BFDEEACF0F4457E086852
-:102D800027BD79E774CF9F77C2B877FE29DAE925A6
-:102D900050D85A7564CFDB5A513F56CFFFF020DE32
-:102DA000D3017BE0FD5F4B7B00AA45064F5B32EA17
-:102DB00021610754AB1B326C683708BDF11F807F5F
-:102DC0004478F8E712FCCB11FE01F1DB4F1B389C75
-:102DD000A76BE07F7825C7CBF2A66C2B9E2F3F6DAB
-:102DE000C826BBEBD3A61C82FF8C0700FEDC5F1F4E
-:102DF0006C773500FCF17C81F087F596B73B04FCDD
-:102E00009D1CFE0D1CEE6C252F6784C0D94BF95715
-:102E100077FED1E4443BE278642BD957C7B7A8AC1E
-:102E20003EC02E9376D137ACF149B4DF24FC67F76E
-:102E3000E91884F2A7F4E1D7AC8887D95B785031E0
-:102E400004FECC9544F1C7EEF9BBEDA86F115FDD30
-:102E500076D445E2A986B919E9C796D70EE039427A
-:102E60007171BF458DBC6FB623F8BE19E69295DA35
-:102E7000D1C5E28C88C0F5A469EFD37918C6BDBE70
-:102E8000CDF9EAD6F9C4E75D4179B925ACD580FE24
-:102E900036D6ACD03DEDEA0585D6428671B53A5AB4
-:102EA00087334509CACBAE5675644F5619457C44E5
-:102EB000E45524897E4929DC2F909C62A3F2742476
-:102EC000237D70DA62F4E17D2A385F25E3FCDE9D24
-:102ED00026C2DB415C13C05F350A3F33A842A4B76A
-:102EE0005B18A7D35BCC7B29AE07279775A81FA7D4
-:102EF0002D3439C9CE8D8FA1F8D2CD42DEDD625E90
-:102F0000EE463D31CD6C746109E37A31F9D7301A60
-:102F1000A687F90DBD8C74EFB034A2F3593C12DFD3
-:102F2000967CF88E0858EA95608EA31F187EDDF611
-:102F30007D5C285EFCF809F64BD74685F78B0C17AD
-:102F400070505C2EF23F9B60EC2858C7A814076FA6
-:102F500077D8B83F7A2DE0C9E2C7AFB69D7979FC42
-:102F6000B20AF3B1F9F758BC241F545D50BDCAC86A
-:102F70009F4F796243F1EA34C6DE618E8188B72AB9
-:102F8000942178EE2F8BF1617CEF3AF487DBB1D49A
-:102F900013BD4CD633AF8E970D663B0EC7FDE325B0
-:102FA000029EBF2A60AD3100F7D6D783FDF337B458
-:102FB000EA5AFB027CAFD3B7B6217DEA221C061B7E
-:102FC000CCE31EAFE4E239A56AE9C5ADB7E289A654
-:102FD000E2D5A3A0AEE3F9AC5DBFE6FE895B805904
-:102FE000116EB7EA59BB9ACBE900E1526B7778A929
-:102FF000DF3C85E237322E20F13F18860FC4E32DE7
-:10300000627D304E8315DF3786C7D77C812FCC8C0D
-:1030100046B8CF157C3757F25B5330BF3D827804FA
-:103020003E55D02E06B8DD22CA9EF8E2A1146E47A6
-:103030003F94C2CFEFF75CE27CCCDC95417979829A
-:103040005FAA4D7C7C39FF75A27C30C54EE3CBF581
-:1030500000BD7E8AE3E8400220BD1E69AC27FB6804
-:10306000160B88C365FAFB49BA0EAD77CB11DDF7B5
-:10307000581ABB6620E8955F443A518EDE626CCEEA
-:10308000A93387F69371E652D661A0EF03493F99C1
-:10309000D03F635533E535952AFC1EF4E9428B5742
-:1030A0000776E2C722BE7B06EC469CA73456A1FCFD
-:1030B000AF69317796205F975A8D7A2C3F16F1DFF2
-:1030C0005B59178DFF892D2BE60686DF4D5031E6C3
-:1030D000070BF8A4D805FBAD47F9C3EB2B5D69E4FA
-:1030E0008D12F54FF7615C66EA79A003AA1F2E7670
-:1030F000C1BCA75F15CFD991627C7EFA3E41CFDE7D
-:10310000E334DEE9C7E4F353FCF90AF9FC2B5E7FF4
-:10311000508E2FEA0F6B9E2FD13C7F82D75B9FF89A
-:10312000AAD88BF6EB684EDAA523149257462137BE
-:103130004A97B6129C4B75BB78399AB5EAF22FDCE8
-:10314000EF648ADB989280F7CE8F58500FFF33D50B
-:10315000654C817E9F2679FE86E59C498AD78872D8
-:10316000F73D1FE985921EF2278D42AE9FEAE5A644
-:10317000F7A51E8371DEC3F12F759CBB43C7F9E42D
-:10318000C78C734D6AC838477FCCBEFE9CCAE12409
-:10319000C791765171BA4BE985FC3A666490BF706D
-:1031A000EEBDCE18F44B31CC7703D0CF5DDA9C91D5
-:1031B00007E3CF7DEEC58C0AB49B84BEAF39A7323E
-:1031C00017C8A3DA730A955FB47D64C47BB335DB9B
-:1031D000DA8CE3A05F2D944501EBAA12EB047DA7E6
-:1031E0009F1CA0A78DBD74426E3CCCF3329E3BA1C8
-:1031F000477CCED5351FFD3DEAEF114AD8F8F2974E
-:10320000627F077BB81F61EEC5E551616F5734EEF1
-:10321000F314063960FCA2FAF0F902BF12EB28158C
-:10322000FA6FFA504B8403E03CE43D1E5FAF589BBD
-:10323000998BFE6263F2E804825B8F7ED62EEE6786
-:103240006DE17ED6527BC702FC4E99BB57EC83F8EA
-:10325000DDB209BF937C062C0BEF8E37C97ABF898C
-:103260006346713F18D6F37E9FF920F2CDDE286EBB
-:10327000CF4E1B36300AE5436766B4CE06FCAC4F32
-:103280002A73F74AC0F6ABC6617BA1C9D2A78CE00E
-:10329000CB882EF449EEFEB84EEC8FFE118FB1357F
-:1032A000E106D887E70D95EE037806457BC2C5CBCE
-:1032B0002FEFC5E5B9BB978DE0B15707EBCCF5AF64
-:1032C00043CE0F76FD820E18EFC8D294C10F38306E
-:1032D0001E53785DAF04FFFCB3923CA302E73FA20C
-:1032E000637DF06871B1EB182EF0711DC2064AF7CC
-:1032F00028A0B780F3DEE431D141F5A9C571CC1522
-:10330000E8BF9D9A1A54BFB1343BA8FFCD33FA07EA
-:103310003D9F68EAC8AF0BB0677BB697BC049F5A65
-:103320008B250AEDBA4F5ABEF9E016B40337AA4E00
-:10333000B45967EFDCF4C148E87506F01B477E49D5
-:1033400007F9D13E9779747A973E307E748A75502A
-:10335000BEA23CD75E6CDC68AEAD9DF2097FAE7854
-:10336000D1BC5EE2FC9BCB72513F9EA97B9FFC7956
-:103370003566BECF532F1EE2DF2D44BD02747F356C
-:10338000BE88F6E23910FCC0FF453B0E519CCD864D
-:10339000C14DB4F7D3E6E9F1FE642D94A85FC68170
-:1033A000DC8A01BAE9686303B761DE48A685DBE51C
-:1033B000E7A690BF7C6F14F7FBEC4D8CA5EF48CCD3
-:1033C0006DB886DA6BCE45D3F86FA91DE3282FFAC6
-:1033D0000585E2131353A72DC5FDEC8DF20EB81D24
-:1033E000E69DF8E7ABC723DC6AB6F17B0213D5771D
-:1033F000F2E74159D5780DBD3F51657B15B01F628D
-:10340000CEDD42E34E441B00EAEA50CB03A89755B9
-:10341000636B9F3FA0BC315A48DED49E8BA4F72635
-:103420001471FDFD7B214F0C9D7C5D63CF4DA2E7A8
-:10343000922E7CBDB282F2F70D091BF5F8BD214337
-:10344000A742FDAF3DD79F4AB9DF37FAFD91BE2FA6
-:103450006048F87A1CE68DBE11AFD8C82CD1C8E3FD
-:10346000B375C362581879D53DCF399E6F6C3AC792
-:10347000F38FFF3BCDF517E4C392459D7A8C17314E
-:1034800073840DE1555230D85111C067EAAE9B8C60
-:10349000881FC3EAB78DA8AF4D5016053CAF16F98B
-:1034A000585A79DD22E483FC8E9BD43F2C7906D1D7
-:1034B000E7AD3641A0828F9E167C2CDFEFA0330E45
-:1034C000E0713BF7F3B7A679DE4239D151C86E7C83
-:1034D0009EE4674706C6697EAEF5039E2314B21BC1
-:1034E0003B29AFBEA4C0A1C3F8C07BDD7A87F3F34C
-:1034F00085F6D126F6FD96CA16E2B86FFDF2971D45
-:103500002E18AFEDEEBC3CD40B72DECF7AF17B0B04
-:10351000CCD6751ECF87B52F473B90EF27E2E10C45
-:10352000E3A23B4D746E81768A77D4BE6C7A0AEF43
-:10353000BBD55AE1FC0AF317BD12D98A74DCF64AEE
-:10354000A41EF5C71DBD3D9F217C8A5EE93B06CFC9
-:103550008BAE16939E91FDE33A4AF2B687F55E482C
-:103560007E69E94CF2A7A781F34B99A0D372C17F82
-:103570001EC14767EB92880FCF2E8245633C759141
-:1035800032701BDA0B0E0B7D974EF2E5443C1F4167
-:10359000FBC4FEB1748FA1EA5C6C101F569FCB1464
-:1035A000FC1D47ED92DFCA059F98847D3143D0B55D
-:1035B000B45B243FB2744F622AEC63623DF0BD9568
-:1035C000E2FEF9C84F7EBA31DA90BE806E922B02CD
-:1035D000F8A7BEED2686768A29DE4D743303CA40ED
-:1035E0003B6566B79D621B9708EB2F5996A9C37B75
-:1035F0009BF2796AEAA5D17F44AAC82730B7E6A032
-:103600005D6BA88B74E27D9A33F13C1E347F058795
-:10361000E37C83BB08ED8CF94F28E43F43FB03E5D3
-:10362000D2D00375C640BFCA4DE706513C7DCAB92A
-:10363000CBA834267B2E4738949DBB5EE06BD08FA1
-:103640008A3F0E7171BF92C167726EC844BF9247C4
-:10365000453C1F4F67B64703E37D6B54F28FC9B8F3
-:10366000A4F43399F0DE4F803EFD46DF9841DFA39E
-:10367000D1FA9D0AB9FE3FB9D140FABFAAED9DA18A
-:103680003A78FE79A62B09F5C97A83A708F733673C
-:10369000B2EF3903D4E73EB8D53ADCE18767B3BE71
-:1036A0003507F56933C011FD5FCD2BD5F13E6EF7BF
-:1036B00044F3381AA76F49CF5A3A9F732E9BE07391
-:1036C000B6CE447AE82CD02D0BD04352EF48392F98
-:1036D000F58FA4EB6A3D975FD5E618CA23F3EB9DFF
-:1036E00049EE42A4BB7E3C1FD0AF779E5A3502F90B
-:1036F000E0743CE55D4BBD21F9E085C5C9944724E4
-:10370000F592E40329CFA57C97742FF5D6E83FFD09
-:10371000EFD6BFC3AF93D23C77A5027D5DABE7FA8E
-:10372000EB5ABD85E8676CFC243DD2CDC5CBD143B7
-:10373000428E1E0A92A3353DE88145A9527E5E1C49
-:103740001FCC117C33DEC4ED4894F381E3B5A68D24
-:103750007E08F7B13A95EBD99F6BDD3DC9FFD5A93E
-:103760009726FF97A45E9CFCFFEF54FE9D0AADBC1C
-:10377000C70F71A3BC3FBDF3721FEA83830CF40330
-:10378000EAC19668C726A10F485F44C5F87E481F66
-:1037900014F69EFEDFA9E1F5C1666CFFB1FA40D2D6
-:1037A00097E41BC927922FB47C24F962C26FE1BC55
-:1037B00088787A8BDF8FAAD67B9B280EE9881E8CAF
-:1037C000FCD96DC76D5388DF42F484E01F3FBF040E
-:1037D000EB0DC91F925F24FF540BFE9829F843F2AA
-:1037E000C56EB5F9D111980A90E6F908E588E49319
-:1037F000AAE7B5FAA147BA424F239B195FC790AE1B
-:10380000AAA10CA42B530FFC70F012F5C2BE8BA41E
-:10381000A7AFFEF3F4F4550FF474E6A7D053A81D38
-:10382000FB61BE03D673361FE46DA69FDE26FC8DBA
-:1038300071FB219B9F07F646F17DEE35A693FF674E
-:10384000C2F73CCF57DA033385BF41D2691ED80196
-:103850006943FCF8C7F3C0BC8B937B8467537C87B8
-:1038600011CF2733A10CB4037AB27F53D32E4DEE80
-:10387000458AFE17C2F380B49FDD6E1C90161EAF02
-:1038800003D37E025E2762A22AF92BB24B5CA3000F
-:103890003F0F89BAB74F09C2F1FA02F9FCB2552EAF
-:1038A0003DCA07D6FDDD75F477BCA5CA7ACEFE31D8
-:1038B000B09E098F32BF1F1D9E8F1D15D3ED1F5166
-:1038C00098BF7F715AD6FE95A4E71B45DE4AA79E96
-:1038D000C783443D1FEA96807A81A6BE96F7B7EA71
-:1038E0003B59603E09D28D92CBF1EC0EB01F60FACD
-:1038F000F6B3A82F6C0A43FF466DFC8657CFA25C37
-:10390000DBA1506CAA1B0EDE810407FA3E38D507F6
-:10391000EF775DC6D8CDDB78FDF6B54356792F132A
-:10392000E306DC1B32342B2ECA4728507C5999A160
-:10393000F0BE3D4DCA13B91E46F71402DE6798AFBC
-:103940007729EF77E74D67D1FBADA64B98FF8651FE
-:10395000E1EF6FAC10FDC6E4C7847DFE709ACAE14A
-:103960002FFC06343F344D690E7F9FFF09C12F1D88
-:10397000183F21784E5A85FEED0EA384B77B15C201
-:103980007B2C63417E34989FEA1BD7BA4B1AF47C98
-:10399000BB2E0DBC7E68BF77A505DB03F49B065FDD
-:1039A000A61F80F7DD61DE7704BFDFFA43F85A1205
-:1039B000F2BEA0DB59928E5D41F41EA377137DC643
-:1039C000C42B36B4A36BDC912BF1BCE0E7CFD21251
-:1039D000829B8C1384F0DFB4923103C84E12CF6FF8
-:1039E0005B85FCEBD675F7E7FC28E91AAF36015C7E
-:1039F000C9F507EFBF9C76EB2AF44F025DD073AA9E
-:103A0000EB03D6ADE5C7664D7D94867F05FF91FC3F
-:103A1000407D0070CA41F9167FC8E808A0934F04A2
-:103A20009C4E897CF28ED1DC9EECC8E2E577693C45
-:103A30002EF599A0CB53929EA202E09016443FF43B
-:103A4000F72102F64D70BA295EF2F3BD25C5C0BF5D
-:103A50001D76FEFC7FD6FE669537CD5FD78EF7CFFD
-:103A6000B5F796205CBAC7F72EDA8F76C44D026E92
-:103A7000DFADBD67BF7780C073A2FFBBAB401FF453
-:103A80003D9E6AA40F25943E5E0DA52FAFE67DFAFC
-:103A90003B043DBDFFB75079E0D2BCCFF07B10179F
-:103AA000FFBEC05BB106AFE335781DA3A997CABAC4
-:103AB0002F48FE4AB95CBEE3E1FB12E3D1AFA9D0C7
-:103AC00075243F3D3F48F43CD726E97715C1D54FD3
-:103AD000CF0FED47FA9DDC2CE9B591F4CF2494C3C8
-:103AE00023FCF5292887A8FE7009C6C5FCFAEA91CF
-:103AF0005528B76F6890FD1FA5FE372F93E3ADA63D
-:103B0000E7128F8C3D46FAEEA67CA9AF1E27B93F7F
-:103B1000A785BFEF4CFFDDFE1FE487460D5CD66A2C
-:103B2000EA5E4DFFD517D06FCB34EF2FD23C5FA9A3
-:103B3000A9AFD1D41B82DF2F9BA1101F9615F0389F
-:103B4000A5962FB5F4E14AEFB673BAF5B96226FB34
-:103B50002E88AF26D4F3FAB5E91B4B1ACC01F575C4
-:103B60009B4A385FC06C01F79F41E67A55A0074336
-:103B70000F72B320BD07B9D94FABEFF9F37FE0AFB8
-:103B80002914370AB24B76ABC1F53655ACDBBB75A1
-:103B9000FF820181F1D5E74BF05CDD631CC7DB5C84
-:103BA0003226D02E62CD25AE807DCAFEE3BEFB5EFE
-:103BB000C5F93CEBFE5CB2D18C714F11DFB4F3124E
-:103BC000F4A58AFABA56F86FC6611E2FC693A25A98
-:103BD00073E60F08D8276BEE83FB6CBB5BE5DFB7A2
-:103BE000AB07FC009CCA9883F250A73317E5A5B633
-:103BF000C5C42CFC2F786FF7DDEA42D4D30717C673
-:103C0000515ED32BE9FC7CB13BA677E24CA8B745CB
-:103C1000DF46F2B6EDFEB154EE525DCBBB6C8C2D9F
-:103C20005EF74A89F9727C1E4370BA3BFDA5922566
-:103C300040EFF7A63BE87D8FDD96B803EDED070C6E
-:103C40001437040E7892E8E741D3603C6F972DE972
-:103C50004F71B1F2C7268DC37BA4E5F719285ED258
-:103C6000A9B3919FC8F3C058CA939AB14C94DEABE4
-:103C7000A97CE5DF7FACC77BA65DEB14FA4ECD5582
-:103C80005F37FF6D10D42B1BB2E97EC6CBE774946F
-:103C900017FEE99ABE3ECC533E1C5947F9A5D09F6A
-:103CA000EEBB569E77EC2FC9C7FEAA0D53388E4245
-:103CB0003BDACF4757A84FE13DCE32AB250AF3BBE5
-:103CC0008F7EC7C8AF73F43E137DEFE653B3E7D6DC
-:103CD00035F1748F092D7D765471581580C3DAF44F
-:103CE000FD25C929D86E12F8DC6F2D033E2FD37540
-:103CF000D30FE9938A585E5FBBEECD924DB08FA390
-:103D00004FF4A57CB1840CD7BA7480D7E10CD7935B
-:103D1000548AFBD9AFFC9BC7255F3A599E88F4B5FE
-:103D200059D0F5CBE7CA1303FF6E41C5293DD1C178
-:103D30002B46C702FAEE6954BA82E76CA08338F4C6
-:103D40009BCF10E716A0E7855BC3D8574BD3B93D8F
-:103D5000D6F6DB84518E20BAFE98E4299D37A0FE6A
-:103D600062FA47A4E78E9816622E75773E24DB1D13
-:103D70004970323445FA2233D17FEA1AE7A2F34F71
-:103D8000739FC996003E14FD3FF1F2FCDF4FA03F48
-:103D90009EFB3EF1FE3F4B603C43F6AFB45ABC681D
-:103DA0005C1CB358F4888F83FAC547313FAD629DE0
-:103DB00081F440C5BA84455D287F806ED0BFA6DD02
-:103DC0009729C3C0FD183DC6573F2F199316785E3B
-:103DD0003941F2BB27BE7C37FD44C9C6013DF365BE
-:103DE000A58DCBA771EBF8F7752B8758F474BF7BC3
-:103DF000DDAB9BE81EF0BCC85CBC5751B9CE44F8A3
-:103E0000EAB458BCB62BF1BE81451F0BE5A174AED8
-:103E10004FF5190EC24791CAF411B954D23D0A198F
-:103E20003F3CB1F0D1C7311DF373E6BB7E18C0EF44
-:103E30008C8BD3E9996D2AF91FB5F1C4EAD7B71A6B
-:103E40000BD98F8827F61047AC629DE2BBE2E1E315
-:103E500089DA38E2BFD2C5BDB3EE38A281BE875140
-:103E600029E288456B155A7FE542FEBD92A238EEE5
-:103E70003F3EB218E8A02FEDDF6BCBC53C69AE7FAB
-:103E80002A99E28B805FAF5E3B8FFC9975E91C5EDF
-:103E900065E23BB087239D1978DEAF58174970AEB5
-:103EA0007C72F6074FE4E37DC089F181E76B9BA04C
-:103EB0000F189FE13D6839CEB125F7D077678BD6D3
-:103EC000C33919F3B463D973376522DE523230DE59
-:103ED00029FB552EBDBB0FEF07E76CD877D90A95A4
-:103EE0007F0F6BBB89F421F07C320BB82F3E63D976
-:103EF000EB4623D7672C79A8B0B31DFEFB6C9FC29D
-:103F000073FC0441ADB8B726E127EF5B95E9F8F7FC
-:103F1000364B750ADDC3028946F7977E91C1FDA332
-:103F20007919DCCE2DCB70D23D9EEA5526E7D24CD6
-:103F30003E4EF7BD7538E755EB3A2A28AEF9171310
-:103F4000F9576A9745BA22AD3C1FE3F9019477AD62
-:103F500037023CAA1C5C6EFC42D063AD63D2D594A0
-:103F60009FAE6707F0EF07565BB89CAC8E05B89B19
-:103F70003901E986E2F73919E553E2B8298302E607
-:103F800057443B8CE3B0FAC7DDAB630DE8A7C1FE35
-:103F9000970F4238C65D7F23AEEF5995F81A80B46B
-:103FA000AA00EDBF67D53C3C7797ADD83D0EE5F054
-:103FB000DC2D83F146052B7BEE5DD2237305FE3BA2
-:103FC000453E5A39D4F1BB81376470B9E951B9DF44
-:103FD000E806012F4907F279F50A03F7E383BC47A6
-:103FE0000153BDE4431AB7DAD2918872B87ABB8123
-:103FF000EE87DF8CEB0638972F491F7500E8AADCA7
-:104000001043DF51ADF24E3462BDAA51A1BAFFBDDB
-:10401000840CA4D32F96BD6045FA391CD99A83FA33
-:10402000A96B5EA493EE29DAB8DFEE8B653974AF25
-:104030006986ADC382DF6599B120DB8E72FCA0ADCD
-:10404000D588CF0F3667EAB0EEB2D94661DDA5BF9D
-:1040500092EA5F887C17FA41BA52389EAB9A761B77
-:10406000F1EF2FDD2BE8E2D4B3EFF6413F50754678
-:10407000471FD42F40077D5211CECF28A49F6B9AA3
-:10408000781EBCA4831AA403E0BB39820E6AB6BDB5
-:104090007017F2430DE23F37948E809EDBA9FDF945
-:1040A0000DE3187FBF1DE944EA33A82F33A03FCEAC
-:1040B000C8EB8B05FEA17D0C6FF70EE0F975DDF9FD
-:1040C00008417CD0137ED766E8043E4C2477D78A1B
-:1040D000FD76AED86E45FC9D7A76F71E8CB7543FC0
-:1040E0000FDADA11861F043C6A71FF565A3FD9195C
-:1040F000B5B85FAB7FFFDD742FF8B096F1FDC9FD59
-:10410000D6EAC5FEE573F1FE3AB1CF2A26E0B5AD99
-:104110002FE73BC167C8C7F4DD21B13F8F3DF8BB36
-:10412000BABBC5FE9A44C96CCD56840FE217E50FA1
-:10413000D08FCB28E5097439B56503E5F74B7CC909
-:10414000F5BFEFD72B2EFC9354128F9D3D7CF7B615
-:1041500045F0C9A1FB92327600FCBED84C9F0D24DD
-:104160007AD507CC27E946CE57F4A749D7E2BE61F6
-:10417000FC561C5FCE7BD01BADC7710E32CE1F72BA
-:10418000FD922F8BEAA75D3BD88AFD4E59B2D15ED6
-:1041900011787C3FC346EFBBD06E80F75D3B14F2D5
-:1041A0005F1F12E7FD43F7BD602D1FE0A7F777C53E
-:1041B000BA259DE10FFAC9E47AF7DAB93F58BB6E28
-:1041C0002987E4BA8BEEBFE15A6C97EBC7F8512010
-:1041D0009D4A384A7A95F7FAB4744B3427F5AADA2F
-:1041E000337DD7A61DA2FC9D9076ED78C23E3A2C79
-:1041F000F2CDBB9E56F97DE765C9ED41F78E1833C8
-:1042000007EA9F25F3AEB615623CB749A17B1E5263
-:10421000AFC0CF4A7D803E92F6C1F0DE3C7FA5362E
-:10422000DE7502F15975BC631C7E9244DAA5577D98
-:10423000DDAAC6A0FF6A1BCF8393745375B29DF8A5
-:10424000A15ADC932A5BF1EEC46148F74F1B28CEDC
-:104250005376DF5823DAFBB3374D1F8AE0C07B1259
-:1042600028DF4F6C1C9247E061B6C4EBF1BEC4C6B8
-:1042700047AFC7BF5F3A63874ADFA1C171908FCB59
-:10428000EEC8237FEBE1C8CE8923D0AEFFB56A43E9
-:10429000BB7EE4A6218BB0FF484BEF58FA78D0C61E
-:1042A00038AABBF431A427A41D2CF303EBC5BD90A1
-:1042B000ECDE9CAF7A75978AC80BACEF83F1F9AE50
-:1042C0000D91F4DDA852A3A3B915E7DB9944E78E5D
-:1042D0005A382625DBE99E2BD969B38C2C222597E9
-:1042E000DA233045F97543C71DA84F5EBFC33218A6
-:1042F000BF8BCBD4F343CBB97DCDE39071C1DF61EC
-:1043000092EBC8EACDE9573B9E7C7F2F9E2BEC7445
-:104310009F91DE3FB1ECE9EB511F9ED89C63C77DB6
-:104320001FDB1949F70B8E1982BFE778A9F7C2B4D2
-:10433000F7A9E43DD7FCDEC1F69CA4FB0BDECBB9AC
-:10434000ECD2F2984E2E66744FFC5C06E3FEE4E875
-:10435000EFB6627E6145A3C986F7648E20FD637C5B
-:104360006BBB4ADF01A2BBDF80AF23DBF3E83E700B
-:10437000C5C7BC5ED1ACF8F0FE72FBC3F753FEC2FA
-:104380004CB037F16A79B73DBDFAE1EB910DCE380B
-:104390003DCBF13B006736F37C8B90EF3ABCBE75AA
-:1043A0004F8AE3FFBFFD2CFD13D37B07DF4793F05C
-:1043B00096E7AA57802E0A72FDF0FB72F12CB29F8D
-:1043C0004F2EF650795A39B46A24D2B32586EE15A9
-:1043D000BCB4E35115BF7353BD6DF0793C1F8F30F2
-:1043E000C7D0F79FBE5CBC90829A2717D7893F8AB7
-:1043F000B654F8157C545EB5AD8DDEFB72475E0B8E
-:10440000DEEB7DD91CC3C59AAB20E83B9912BF3DBA
-:10441000DD5796FBFAFCD71CCF72DD9F6F9E6EC5F1
-:104420007DB5FD21AE6538E2373AC6867660A5C80F
-:104430002F39BA86DBD9C72362FEAB18F07C7CED3E
-:104440009444FC0ED1CCB6A9D7637BC54EC586E794
-:1044500003E7CE49563CCF7DA6EFB4E23DAACFD6C6
-:10446000C8FB573EFABB7B23C6B329D87F44AB9E1B
-:10447000393229844CF432FCA49EEECB7E01EDE46B
-:104480003F391F45FE13F889C37C92992F72BF4BA9
-:10449000F7F9579CFF468A7DB7F7B6CBF806B517F4
-:1044A00015F0F6636BB796D0DF4FDE68B0E1BABFA8
-:1044B000DC68A0F1E7C0B94D07EB3DBE999F83B022
-:1044C0008EE7E8139BF979674E333FEF54CF33B84B
-:1044D000F8FDD260BA2C0AE847DF2DEBE1BB23736D
-:1044E0005C7C7F73407FE27E2F44BFB1AC99EE9F2E
-:1044F0005D6A3EA9967EFFAA9117DD74DB13BD08A5
-:10450000B822FF23DD4ABA98B386C7F5EDCD830BF9
-:1045100091FE249D68BF03586F64FC3BB2BA28FA31
-:10452000EEF724B3C380FA624A7CE718044F5F07B2
-:1045300097AF6A91CE85F7E458BD29EC77C4DE15B4
-:10454000F2781ABC4BF7BB7ADBF8F7CFC47D315950
-:1045500082BE4A477D3E29DAFE8D03BA74AEFFF271
-:104560003A3DD0F5A491F63BB29D80D7F55FF37A42
-:104570009E7D7B16D43FEF7DF63A3DEC6FD295F6EB
-:104580002106A82F59F2CD7563E0B9C9E13AD83BAD
-:10459000609E139B92D2717FD07E08DBA7277A8E14
-:1045A00060592BEE8F9D56BA062DCCF4F77F7BA772
-:1045B000E5E04B0E7FBDD3C0E8BB3BA77BCBF587C7
-:1045C0002F9D0ED7A9DE09A1EDE58CDD47F97C5EB4
-:1045D0007E6F077EDC118978AF8AD35DB9BCC7D303
-:1045E000A0B9C7E3E4F7D5E4FD2A797FEA72FFFDBD
-:1045F000B3B59772FFECFF0069F3B24F0080000083
-:10460000000000001F8B08000000000000FFE57D97
-:104610000B74545596E8B955B73E492A4925845438
-:1046200025A984AA7C2B90C0257C0C3148E5030485
-:104630008858286AD4A005A2808214011D74F455FC
-:1046400061307C9AE98E9F1722462D10957178DD96
-:10465000D1B16D868F532032FC9A0EB463EB8CD3AC
-:104660001DD0D168631B3138F40C366FEF7DCE4D11
-:10467000EA562A80BEE77B6FAD975EF6619F73EEC8
-:10468000F9ECB3FF67DF5B5F192CEBA564C6240F61
-:1046900063AB53A1745A596319947BFFE9CFD26875
-:1046A000C69A83AC3B2E8FC15FA3F5D35150CF7C0C
-:1046B000BA4B502E4B481ACDC660991362D06F99F1
-:1046C00089B1AE12E8263B6DCCC2D81209FE9D011D
-:1046D000FFF9CA194B676C9515FEED44B84287F097
-:1046E0008366467F9F05983FDFC0D81F4F742539EA
-:1046F000F58C9D9D1D2E0CBB18FB65BCCFE69C0068
-:10470000ED1DCD8EA634C6BE7CC3A4D443FF9ED07F
-:10471000DF27F960FCA57AE6EF84926D1FCED824DE
-:10472000282FEAC353A0DF6157F1B68DF0BCCBA9A7
-:10473000630C9E3FEB0AE7FCF578C6822E93F232BB
-:10474000A37E773280EB1E9F3E1CFB9D7D7D5DFE30
-:104750003DB06E93CC5812EC7B068C590E7830002D
-:10476000AC2FC30742340EB40793A0BEC5F5740E38
-:10477000237C302F9BC8D80D8CEFEB0639BC1FF182
-:10478000C5946419F7379B6F0FDB83328CA33333E7
-:1047900003AEBB9875583F4D0098B18E4BC3607FF8
-:1047A00066C063329680C724C6A6EAA113ACAFE9FF
-:1047B00097FA9009D6D784781470D085237A2CD7AD
-:1047C000C3F88BC5BCCB8EBC6BC4C15810FE07EBC5
-:1047D0005922E65DDC71773D9ECB9290E14CB7C0EB
-:1047E000F525FA7F0F9DC772D1EFFEF2AD469CE230
-:1047F000FE1DDA7ECBD9A6AFF5F0FC52D66DC4FD16
-:104800002EEB8C6AEFA8F90CD7BB7C97B6BEDE996D
-:10481000988674C2C6B2B197F4544DE7BD48F49976
-:10482000AA6F74CAB89FE166C50413373D9F47F469
-:10483000C2DE0CB0C87EAC6318D14F8B4B4FE7B1D2
-:104840006497C49CE318BB7E5716734253FDAE6158
-:1048500054265DC8A0FACF5F3936DE5732705ED776
-:10486000BF6AABC6F55DFF6A1195EA3A9A041D4E20
-:10487000D5977486611DE72CB00E809B8EC0628137
-:104880007E9A6ED68718E19999B1BF572CC76B599C
-:10489000DFA54F42580E8AFD4A97243A84643C1F94
-:1048A000EF613D437A621E03B53B9979CDA55CA0CB
-:1048B0001BBB8E3963E0DF24CE2FCE19CF9CEE8157
-:1048C000763958FCB34A588761AE4109417B735C25
-:1048D000D236E43316F474E5C3730DE2B9AE384E44
-:1048E0003709EE54CDF32A1DDC2AFAAD4B9A76181F
-:1048F000E9B2C1B388E82151C9D4ACC7A45F6A400A
-:10490000FAB9D567F8A43B621CA25F58C70D5E29AF
-:1049100084FC787383B6DD50F975AD4425D4478E99
-:10492000E7D5F6FB29D203D03B107E71243D0C9CC9
-:1049300083C5A3C373F02412BDCBCCB9B912E05B1D
-:104940000E1B18EEDF14CFF7790E319786FD800F1E
-:1049500060E2758817A84F2ED7E237C5A3C5E7B028
-:104960003A2D7E867BB5FBB735E46ADA337C233596
-:10497000ED598BCB3470B6BF42D37FC4EA6A0DECDD
-:104980000ACED4F4CF5B7FA3062E68BD5DD3BFA84B
-:104990007D81A6BD38749FA67DD48E260D5CDAF984
-:1049A00088A6FF985D8F6BDAC786376ADAC71D7EE7
-:1049B0004A034FE8DAA2E97FCD07DB34ED93BA5F13
-:1049C000D3B45FDBF386069EDCBB5BD37FCA850373
-:1049D0001AB88A1DD3F4AF31FF56034FB5FEABA60C
-:1049E000FF74FBC79AF619CE3F6ADA67B9BFD1D216
-:1049F0006B3C9793D72BFFA579EE5993EFDF505F70
-:104A0000344B95DD4186F4EB243EBA354DA7840145
-:104A1000FE832A97041D9E1C612539C1F2598EB769
-:104A200014E9B0328C7C7C6E9744F2E0AB28BD2850
-:104A3000FFD1EB91A09DFD4A525E7622DD415DC41F
-:104A4000FC291E339323D639ACCEAA81877BED9AFD
-:104A5000FEB606A7A63DC3E7D6B4672D563470B69A
-:104A6000BF5CD37FC46A8F067605EB34FDF3D67B3B
-:104A70003570416B83A67F51BB4FD35E1C5AAC6926
-:104A80001FB5C3AF814B3B576BFA8FD915D4B48F89
-:104A90000DAFD7B48F3BDCAA812774B56BFA5FF3F7
-:104AA0004148D33EA97B87A6FDDA9E4E0D3CB977DF
-:104AB00097A6FF940B610D5CC58E68FAD7984F6A74
-:104AC000E0A9D60F35FDA7DB4F6BDA67383FD7B4C7
-:104AD000AB76D02CF7D7DA7A61175DAFFC59F37C4F
-:104AE000B0DAC3903E826F484AB313D6EB02E13F7F
-:104AF0009CE47C779C1EED282F18148C0129AD4175
-:104B0000FD920C420CE90A488C35A6E22840AC2004
-:104B1000B74955C1F3C9684F0090AA73B9FCA01FEB
-:104B200013D85AEBA766B21B1C9740DF5DC2BF29A2
-:104B3000834B94A09FAAEB85F966A14E023A6F724F
-:104B4000F93C2E58CF7D9DAF4FCB626827045B7038
-:104B50001DA00793BB416F9E886377794B068F3703
-:104B6000C30C788998EF485CABA3CC32F4FC33CC0F
-:104B700067A97FFFB8063EAE04FB6B8A18FFA7A0AB
-:104B8000EE65B0FB5A03C037058C3D15B012FC4CE6
-:104B9000C04E705BC049657BC04DE5968042ED1DFF
-:104BA0008172825F0878080E05EAA8DC16F052FDD3
-:104BB000F64003C1AF047C54EE082CA6F2B5809FEA
-:104BC000DA77065613FCF34090CACEC07AAA7F2348
-:104BD000D04AF09B817682DF0A84A8DC15D841E5B3
-:104BE000EE4027B5EF0DEC22F8ED4098E070E03094
-:104BF000C107025D041F0C7C40F0A140379587037C
-:104C00003D541E0DF452FBF1C0058207CE4B6B578D
-:104C10003361572E1274C0D2B83D792F3F52F685BA
-:104C20008E2D46BB7791A04343359887407786CC3D
-:104C3000C26DCD2E3C6AA01337D1C971B42FAF9687
-:104C40004ED070407A0D563337D29B5AB654E9C9CC
-:104C5000FE0CAE90422F73BB88EB6F3353F537B524
-:104C6000373E2885D09E9B0776B211F8E623619FD8
-:104C70007C14C7E5F539BFC18D765FA314AFC0665C
-:104C800001FE77B23BE02F8CA47FD75ED356B49F52
-:104C9000D4F535C2383A18E7BFEC2E5A57233B6C8F
-:104CA000C0F540BD470FFC72C6E6DBE202BABE2F7C
-:104CB0005B17342213594285DE44C68C76DFF348F5
-:104CC000E7E7FCF71CC2C1175995429CE77A537875
-:104CD000F8AD307FEF11BDB2CD39345E96B7CE005E
-:104CE000E17D99F6B73F77A01D5FF717BD0FCFE1C4
-:104CF0008421B1210474DDE99288CF3A5D3A4DD91F
-:104D000066F7FD02D7F96DA2FF4E1DA0F2DBEB5650
-:104D1000BCB212B6D4B8A22019ED55F00F0C685FE2
-:104D2000CF614E03CA879B98E75D1CEA66E623F8CD
-:104D30005616A452B6F976E1BE6E6321827D15A6A1
-:104D40009C58FB8A5ED73B38D8702C759AF290DD60
-:104D50007700C7FB36D143EB3A31697A21EE4B5DE0
-:104D60009739C349FD66B3DE17707DDFEEFBFA535A
-:104D7000296F309DFC88F4618169B03F33C2793777
-:104D800003EFE038CD0F4B21A473953E1AC14CA719
-:104D9000F11F857A29925E804ED07F4BEBCD99939F
-:104DA00048F4D24DF26F923E68047BFA842E542868
-:104DB000E9894E8C12AC73511AD049EED0F4F0C090
-:104DC0007A2823E420D0D91738DE9FFEE11A37E293
-:104DD0006DF9DB939C88B7661D9C07D073F0A89E85
-:104DE000EC042644BBFEDAD210F907B2A2CC29C5E6
-:104DF00073E37271BF9EAD7E3D86DC4DC8E5F474F1
-:104E0000C26EA80BD1B89CEFD5767D2E3F477D2E84
-:104E10003FDFA6159F2DD5C3FA4F1CF8DCE82C8D7B
-:104E2000B18FD53F79283F82AE97EF3A3DCD837E53
-:104E300017EB2EB93171A0BE50CCABD291DE98E801
-:104E4000DB6A895C573F5DC7E7225DA7005DE7111C
-:104E50005D7F8A76F96C9333F95628BB013561285A
-:104E60007D2F5AC97F5CC0142A17322F958B800C76
-:104E7000908EBDC1278D88F7FB5827D53F507E7790
-:104E80003AD2F5BD3A1FF9D94B5917D52F67BDB5A1
-:104E900078B437AF5FF3AE1D567D53EB9353914417
-:104EA0006F0CCD7F17CB39DBA54F834EE293EC5CC3
-:104EB000C047B7E47F2213E6BF7D67D51359503F43
-:104EC0005BCFCF851DE3E7A2CA91E87D035F14E0C5
-:104ED000F3DFA678685FFAA43A0D5F343ECE3C1249
-:104EE0008CD3BBCF14DAE68AE093F2FBFF9085F215
-:104EF0004CEEBD13CF7BF9DBA6543CEFFB18D7FB80
-:104F000092478DAFA8FA9E11BDDFCFE215ECF78571
-:104F1000A0EF2FB219D1F71712388A65037628CB84
-:104F2000F1D9CBF206F4F672DDCED18827D0EB951D
-:104F3000780EF77DDCD932D685FA2094837688E125
-:104F40003593D2ECD2E817762901858D9F213E7FDB
-:104F50008AE38E19BC2EA9FCD09FD1EE301959D00E
-:104F60005C467CCE26227F671A89BF9A11B57938B4
-:104F70008FD7E9B70C1EFF8458EFE1EFB83F1D84CF
-:104F8000FDBC2CC59A87EB2F53FCC03C2447D2199B
-:104F9000CD73472EE763753E66E976A09D7E34C1EA
-:104FA000773B9E8F1A4752FDC8C3AECFF2F17C66A5
-:104FB000576C50E5338DC7AEE372E984C11944F8EC
-:104FC00044954B0109D62F6F6F28FFA70F701D372F
-:104FD000982D618C77B04AC3D97EFF3577401FDFAB
-:104FE000A0EAE3CAA8F88E1AF7618A01D757CC3E27
-:104FF00052F141F11D554E0ED2BFB0B12EC49F8863
-:1050000097F5C779FEB93FCEA3C3798D428E32E6BC
-:10501000777B23F8D4D600AE8BC67F30B37C8DFF70
-:1050200060D5C0D97EBBA6FF88D54E4DBB2BE8D638
-:10503000B4E7AD573470416BB9A67F51BB47031736
-:1050400087EA34FD47EDF06AE0D2CE064DFF31BB72
-:105050007C9AF6B1E1C59AF67187FD1A7842D76A53
-:105060004DFF6B3E086ADA2775AFD7B45FDBD3AA72
-:105070008127F7B66BFA4FB910D2B457B1BFD5B488
-:10508000D7985FD7C02FC6F178E754EB3F689E9B57
-:105090006EDFAF815F88E7F19A19CE23DAE7C5F9B1
-:1050A000066F8B277E98E53EA969DFFFC8C8CD8DC6
-:1050B000C02FA14774E47FB6D5713DC51AAA391D2A
-:1050C000C4F1BED72B1F6AE6CBD1F7BA908E9D7A7A
-:1050D0006B26F2757EF99C034076ACD0B3A21AC55C
-:1050E0009DBBEEC903588EF4BE5E8D6C53D270F238
-:1050F0000096A37D5F570319336571CA3B5896F933
-:10510000C7D6D87089ABE7BC83E5C4E08A1A94B3EC
-:1051100060267EB108D67D3E38926D84752565AADD
-:10512000715E0FD1EDAA0C1DF1F9AADB2C14374BDF
-:10513000BFD622A33EDF1CE81A7910ECDCF4A7D31B
-:10514000D762DC693DD8F9A122B017C0EEC7F25989
-:10515000B0EB43E01C6D04BB1FCB4D60F763FD73E8
-:1051600060F7239CFE74D97A7C6ED5C97BEA7261A4
-:10517000FC110FCA563453D739752B0EC07AEC0F79
-:105180001AAD284B8CAE67E29CB08EEC65B08E0AEF
-:10519000428B0751FDEC52301C32391C07FDEC2BC1
-:1051A000741AB81DFF45B02E588BCF973EE9DEAE7E
-:1051B00030F6F9B6B337198A619F795DB76D4D0145
-:1051C000389779E602BED3F12C60FC93798FCD0934
-:1051D000960C8697147AFF487249EE2C463EB51617
-:1051E0007D9481EBDA50FD85A2B3E23C8FCC390887
-:1051F000EB7E7E78BC58E72373AAF2AF665CCF796A
-:1052000094EF50EFEF8C2147FE53E8FF93795C2F2A
-:10521000C39F15E5938D9308B3819D940CF276F3AB
-:10522000A4D5A7D1A790AD4109E523BB08CF4F1462
-:1052300028C823784AFC441EB247795354E433E724
-:10524000C178361FD84E91F1B1C55A78339CE71911
-:10525000C3C07A0C77E98232ECC1F0925751609E5C
-:105260008E79B05F80371BB5FE65918E917D719F01
-:10527000BAEE8B372968A7DD97C7F5F09680BBECAF
-:105280001303FA7F4AD9274047998BFD920FE4AB6D
-:10529000ADD1AB04A19FE1D2DFEF372261DFC53A88
-:1052A000519F63FD9A08BB27478C6BB8A427BC1994
-:1052B0009ABD4A6AC4FC06BDE4EF8C617795E6C9E5
-:1052C000FCB96646ED86771E969C305F666348BAE9
-:1052D00087C6F14B0AD4DBC2BC3EABB1535A08F0CF
-:1052E0001D794E3A07759CACC5B0FE083CD9E5A0C7
-:1052F0006485E7ED8F0625C483DDEA555822E2DA9E
-:105300004BFCBD52F0B47DF5C4B24F86E1BABD8A04
-:1053100017E79BA5F29BDFCA703D1F2BBFA942BDBB
-:10532000F61B3DC3FB8C6F9C4A725A8C7DA8A5A9C5
-:105330005BCF3C97F16792721EF1939EBCDDE22C2D
-:1053400000FE7DF1364BC3D6187476471EA7B375A1
-:1053500099AADEE2EB49D7733CA9FAEA1B2BA71FF7
-:10536000556EAD4CE1B03ACECAECF12437865A8F77
-:10537000AD3D8EF922D6BB19E6B1E2FDCC772BAC60
-:105380008837F021BC349FCCE5E9D6E7DDE4374629
-:10539000D3CF203E00D19B5C8674D91D6A06BA31FA
-:1053A000CD332A682FDAFE5B8B84722493B54A28AA
-:1053B000476DD9B58765D4E7B2AFD81BC38EBE128F
-:1053C0003FA8E7A9DA2583CFCFF9BB2AB2430D0C5A
-:1053D000E9B6C9E5B4E1F9A974DA746478AA2FE2F0
-:1053E0003CD70B3A2E67AD7AE4D30AD6496525EB54
-:1053F000A2F23AD64BA58759652CAB9942652DF39D
-:1054000052398DF9A9AC63AD54CE649D54D6B32EF8
-:105410002AC1BFA3D2CBACE487DE08760C96739981
-:1054200097CA5B989FCA2D48DF13F0FEA195E0DB79
-:10543000592795BB80FF9D45181F3153B917E43993
-:10544000966F833CC7320CF2DC69C2F8889BCA8332
-:105450000185CA4381722A0F073CD4EF68A08ECA27
-:10546000E3012F9527020D5476057CD4EF5460316B
-:1054700095EF05FC54BE1F584DE507812095FF129E
-:10548000584F659111E40AE2DBDD3D16FD9A9C8FD1
-:105490008D1E27E8A34FF384FFEBD1FDF7E2F178EF
-:1054A0008E3ABA83B1D5AE94901E6D6E9D2704E5F9
-:1054B000467793743794EB4E703BD6644B243BD9BC
-:1054C000D6BE4A72C2B8BBA46E7D029CEDDEBC0F94
-:1054D000E798414F54ED656B1314847FFFA419E8DE
-:1054E00070ABC1DFBB15DA7FF5D2BFCE3183CEAE54
-:1054F000483CF5C7D7384CED930EB2662BC007F287
-:105500004E3F9926F175A0103EFED2C773D6E4E354
-:105510003AB91C79D5058E36FA190F5BC8CF18DB5E
-:105520007E66AC0EE049AB2D65E81F47F4A3B8F5E5
-:1055300050FDA2DBD5E73A56A437231ED67D0AEEEE
-:105540008913E565F7588CCF458EABBBBAF999FE48
-:1055500032F347F6932E335E5191E754DEFF037426
-:105560001E4DDF864B1FBFAEA3F8983515F5FAF632
-:10557000142E777AB3E343DB60DDDB5305BC219F58
-:10558000F6B50E61D8D7BA8DB964C76F8FF3361DE3
-:10559000C1F6BFD129DBA0697BBC6F6331C1F914AF
-:1055A000AF5997EA77A35ECA49E0FAB1CDF1489CBA
-:1055B0003382FFFF22E4EEE6CABEAEADE84FADD7C0
-:1055C000B102786EDBFA051BDC30CE4B9BC02E029D
-:1055D0003879F2C20D05D09EBB4137512F641EAE03
-:1055E000E3A54D0B5FD928E1B823530B61DC3C21C7
-:1055F0003F7386758F5D0974DE66D4C615FAF56350
-:105600003EE7978530CC19D0BF39225EB1D5C01A9C
-:1056100022F566413E97B73545BC344CE1F13CD3A9
-:1056200088F8D0E3B0FFAA113CFE93BED64CF19FA0
-:1056300074C77F9E9C0EEDE91D3A054D5AD9B6748C
-:105640008D01FD9EDB5827F2E356893F1FCCE6769D
-:1056500032182CB97322FC1EB037CAF223E2A7F627
-:1056600086A084718CAA114B258C37A73BEE933012
-:10567000FE91DEE0937C89E827F9A9FDAE229F2BFD
-:105680001FD6676F84E735F7B1BE0C3C5798B781DA
-:10569000F20964561639DFEC228E872764203DB468
-:1056A000DFD71A695DD1F89AE5AE1E993F7CE01C00
-:1056B000A3DBBFCCE7E7B8FD719802F960128F1F3A
-:1056C0009C783993ECE5D96DF11EF4234F3C39B247
-:1056D00096E0A72A3C68FF9E78B9621A96B39F9A13
-:1056E00049FD4E48EC30C605663F75BB8CF53979EF
-:1056F000B02E1CEFB491E871F653F789E71FA9C5E6
-:10570000F6725DF0EFD09F2E6F7E2D01E3051589B7
-:105710006F64617942D7BD6A3FCC7F8395FD1AD50E
-:10572000B57743DADFD4C13FE63C996BC0788C375C
-:105730003F97CEF326E631F07C072FF9B7953BBAB9
-:10574000DE018B8E5DD7D95B83D7BA9E5DD6835839
-:1057500056871534A359ED61EF412CA775F96BD12C
-:10576000BCA9FBA0F52096DD237D5EC4FFABFFED59
-:1057700096375E0578C463ABAC6887E63FDE3D6371
-:105780001BC52F0D0CF9A16092BF558F046CF6A6B6
-:10579000A27C78F6195987FADDE46A8D43D8744FF4
-:1057A000AE0EE34CDB535A17D3BE0BE219E2F128DD
-:1057B000E821A48B82146F2AF213F0259DC39D82E9
-:1057C0003E4D297E6B0AD68B7B8EFE7EF11C5ED809
-:1057D000DFAF354EA27952A5A0C4CD08B423EC4268
-:1057E0009FB7337F06E2C396E8DF8AF1AD822ACE07
-:1057F000FF2C91D305766F99488F50103EBDD53F51
-:105800000BCFC1E6EBCF1BE074076AB0DF3EC925C2
-:1058100098EE7F364B1C063943EBC23F8CE7A45B06
-:10582000D2C9CE51D76F6B80F122EC0EDCC78D96BA
-:1058300081E754BADB20F6F584280BE6F3F1D4F5C2
-:105840006ECCE77A1DD6EDD4E17AF4623DB00F5DFF
-:10585000C47A22FAD1FEFAD7CD143BD205637E89F1
-:1058600097CC2947EE7FA1CE13371AD7FFD65F61B9
-:105870005C2909E508ACF367FB2799914FA3F7F181
-:1058800042BE88FB80BD8CFEC34C1FE7DFE646BFEF
-:1058900084FE940D61DCBF43F6605CD46669920CB3
-:1058A00011FBB539B89E9ED9E8DF8F7265667982A3
-:1058B00082F43D8B75AEB572FE3E980FEB2B62FD08
-:1058C0007F163671C04E7CFE99F74EE2913A5867CA
-:1058D0005531EACFC7EEA5BC89CD8FCC3C8CEBCF40
-:1058E000743FB93F1506F47E2DCE7D3E8F6F6577F0
-:1058F000C89ABC872CBFACC98BC858AC6D077AD08E
-:10590000C02A5DD9A5D529A86F7409253367A09D44
-:1059100092A423F90E724A9A1BD31E8DA22B817F6B
-:10592000F57CDECDCFA773B359F839B05EC57C7373
-:10593000A2D8AC7A4E306F33B07932D07D73AD3EA1
-:1059400024A11F8FFDF132B2970DF7260E3EA7ADB1
-:1059500006E7CC1928A71FD45929AF2A0AAFA06798
-:10596000FE99FC9407D3A81DEA6533C53D23D6AB49
-:105970008F056BCFE34AFD3B5878CE0CD7E0FA4C4D
-:10598000C7DC99A8673397323AFFE8F6A247B5E734
-:105990004A7EEF788CA3B150F8079CE74CC7F65AC3
-:1059A000B4EFA3CF55A5BB9C61B1F5C223055C2F15
-:1059B000E42428A7EAC8AE90C94EF066CBC323FD05
-:1059C000A4EFF2B91F30E55716D243EC6373081FFA
-:1059D00055C25D3F298673A8EED3A1FBC2DE3D7E92
-:1059E000E0E999504EFDF57B4DC7A0DFD4EF2CE3E5
-:1059F000B07E37EB9E8181A0E06103F98D6BBE7CA8
-:105A0000A5150344CD8D4C41BDABCEE328E0FA6E25
-:105A10008F21E425F95A2CB36D2407D9C54B11F415
-:105A200002909EE887B7316F632BF991B6FC12861E
-:105A3000793CCDACF30ED297678D0CE3AF37363897
-:105A40000D55B0FF1B1B9D86F9789F21B33AB423F7
-:105A50006E6A50A8FEA64685D79B79FDDC060FD559
-:105A6000CF6DF4F07A0BD45B300F29D41580716FB1
-:105A7000B6A43A75781FD0E8E5ED174CD47E1CFC2F
-:105A800001CC278C8F0B91BC6FEDD1F17B237F7CF8
-:105A90004882B59A12CB0E3B117FF7E8145017CC11
-:105AA000942D332BC0CF3678437A687F8E853210A1
-:105AB00091BB1736790BA17EB743B6E2FE76837BA6
-:105AC0008BF947C1A532E19DFE00DEBDD841F73A12
-:105AD0005B45FC3EB8C44CF166B07528DECC9664DC
-:105AE0000A3B86B7772CB086D01E033948E7D87BAF
-:105AF0008F4C7600C8C3A36EB48B76E62B189FCA72
-:105B00005CAAE5B7F4850BAA68BC4666453FBDBEF6
-:105B1000918FD7BC5317D2A15D65B97126D241F3DD
-:105B20000EA6A03FFBECC253B5C310EE50142E3F9F
-:105B3000B472A179E153479CB81FBFCE5A40FD799A
-:105B40001CAFD95FBD5D2F0DF0339DB773407E0C48
-:105B50009637CA611C27635EB582F1C174D827C627
-:105B6000F33B8CBC3E78A74CF72DE90BE5B075F400
-:105B7000007F670B14A6231F26917CD1F0D7C89D08
-:105B80005AF879C1A7C0EF32EE2BB89D513E67D1CC
-:105B9000766D3F90933A9457D9EDDAFA5B8BFAE33E
-:105BA000021A3C44E3D9E6E7722F7A9F03FB0AC747
-:105BB00015D1BE747C5F28D7A0BED87280EA8B1B3B
-:105BC00065C5E94479D7790AF75FB453666180EB1C
-:105BD0001796CD447AAADFA4A3F0C8F5AC8BE4C233
-:105BE00095F6ADC63BA2F719BDBFEFF2F55C8EA8E6
-:105BF000F6E01366B207DB1EB6E8F09E15ECAD7852
-:105C00008C2BDC55541D2C407B40C81DC3253D9773
-:105C100027CD16A25383ED517764FCA16554F5138B
-:105C200005D46FD88D753C6E41FB8E96633F17E3AC
-:105C30004DEAD6E6E35DDB131F953FA6CDC79B7209
-:105C400021332A7F2C2F2A7F6C94A67DAA755C5461
-:105C5000FED8B551F963351A78967B96A6FFF5CA3A
-:105C60004D1AF886F23B34FDE778EED6B4DF547770
-:105C7000BFA6FD66EF4A0D7C6BC35F6BFADFE66B78
-:105C8000D6B4DFB1F8279AF668FF492D771570F979
-:105C9000BED9EE3F49016CD0F791F73D6A99DE28F5
-:105CA000F7469E7B5202B7A7A2FBFDB980D3FB8BC0
-:105CB000129F8F05ED9A781CF3D835F1BA7045859F
-:105CC000B91BC6711A95DF21DD62E20EBFBFB66B4C
-:105CD000EED9F63F0EFD60BCA6C45C1BEA3B8CFF10
-:105CE000FA40B9378774745F615BBF4A223DB86977
-:105CF000158FAB5C30523CAF7F1DAC8EC6FB46DCD3
-:105D00006BA9EBEC1071A42D18474285E49941FD75
-:105D100056C6F17E3F4D57E38E3E1A37A3DC18A4DA
-:105D2000FCBC857E09E3C0CD3E66C57B9374CB0287
-:105D30009AFF9B0625995D262EDA16B0330FCC67A5
-:105D40005F155C6384BD7D52D0F7D4B3F0BCDDCF6A
-:105D5000281ED35BF0ED53188FE943E108749D21B1
-:105D6000733C3FF7C0EECF5F81F9DAE6A597A15CFF
-:105D70008D6ECF5ABEF7EB4397697F6ED95B1FDEFE
-:105D80007BB9E71FD875BA25A27DC838694326F3C9
-:105D900044D001E02CE6FD805CC8F5F9F20A23C589
-:105DA000B1AE01FC1502BEBFAAF8CF893BE0B93FF6
-:105DB00039FBEE443B1DEA65AC877E84D73FE59F07
-:105DC000A3FC929C5160DFA3FD1D179B6EC715724B
-:105DD000BA956D8DBD18076A4A343AD1CFCF32BB20
-:105DE000CA3E1907746DE07E75B4FFFE5CBFBFDD6F
-:105DF00049FE779118274B947A2B7F9E99834C4EBE
-:105E000017F71431F0A14F6A97505E652E943F8DBD
-:105E1000E48BFD89468A23A45B44DCC1B258131786
-:105E200050E306FB13EF9590EED3C34B289E8FF102
-:105E3000021C6F5CA193D6111D2FC832E7D3BA861E
-:105E40001E9FF5D7274831E6895A871A9F889E27D3
-:105E500084F604EA9965F1644F44EF7B4961557912
-:105E6000E170E4D7DE93D3517E9F32903E1C8A5E70
-:105E700030CF3C1431FEB442EEDF63FE78643DE681
-:105E8000878722E3D9CC41EF2B100C2A6684B17BA3
-:105E90004311CE7794CF77C2A0D8C91E04B587FE30
-:105EA0005F7D21D703D330976D38F219F7CBDB81B3
-:105EB000AFB1DC12B0927DD601FC87F00B012795C3
-:105EC000A1809BCA6D0185DAB707CA097E25E0214A
-:105ED0007847A08ECAD7025EAADF196820F8E701CA
-:105EE0001F959D81C554FF46C04FF09B81D504BFCF
-:105EF00085F66001C6A9D753B93BD04AED7B03EDC7
-:105F000004BF1D0851190EECA0FA03814E820F0642
-:105F100076117C281026F870E0309547035D547F99
-:105F20003CF001C137E33EC9AE58DF15C078854F5C
-:105F300076A27DF7AC6FA115ED6BFB7C9D15C57945
-:105F4000BB4FB704E31C1D8DFC1E13EF23310E0461
-:105F5000766808ED39FBFC678E4CA5F6B9D4BE19FE
-:105F60008704A7C4B682DBAF6C9991FAD930210AB5
-:105F70009EEB58DA18D203DC5A184FEDB61532F9F9
-:105F80006DCFE9FC2985DCEE22F96D3370FB41A56C
-:105F90008335855CDEAE29E4F75C1F16F1734ACACF
-:105FA0008BAD479E2D54EDA6F587717FF679B03FF6
-:105FB0005CEFBC5566BC97B5DDA3B3727B93DFCBBA
-:105FC0003A60BFB87E580FC585D97C6E2FDBE6AD31
-:105FD000A57539E6DF48EDD6A24753D04F6FF7AF2E
-:105FE0009A43EB6D9429AED9EE3B9082F76CCF8942
-:105FF0007C27DBF0786FA864F07A9E8D5A7F07E3E8
-:106000007E8303ECA5D763EC03D36E49CF3011C771
-:106010007BD41C338ED729E8D72171FE630FCAC405
-:106020007F2F30B0FBE0B92D60DF05510E54BFB6B5
-:1060300002E355BD85BE9D28379F778E3F20039C88
-:106040005AC7C7CF5D25BF8276349CF7E72D50BF76
-:10605000E1BE4D5E5CEAB04DCE35C86EEDF3DFCAF1
-:10606000C0F89743D29E8F5ABE2DF6F982878FB71C
-:1060700065954CF164DB8A375D07F9BCBB91FF3352
-:106080008B3E8AC3304CDE5CA70E4586639EFC3592
-:10609000CE1777FFA63A42CD268F3ADF589CEF6A9B
-:1060A000F134E2B15A9B2FC6BA869227579223BF8A
-:1060B0002914EF8164B12C9423CF19B8DC0A9EE433
-:1060C000F62425054D1A3C8F9A2FA0E60F44E70BC6
-:1060D000FC5EE029CBC462DEE77ED64FBF413AD7F3
-:1060E000173C1BBD9467E3923149873519D8127A62
-:1060F000EFA72ADEBA26063DA8E55328C700C11F30
-:106100001632712E9BEAF8383A3ECE64B682E02A07
-:106110008B3518435EABE533629C7F2BE4749B7533
-:10612000DFCE0D87F07C8F1A28376A8B2EB401FDE5
-:1061300084E0093DC9D74C7DE7D65722D6F51741F3
-:106140009F5B8CA162BC876E87F14A50AE22BF94E0
-:1061500050FC82D547E05D7DEE3F841DF0FCC575A7
-:106160002974FF3C6F6D1CDA47EDCC4CF46033F8BA
-:1061700053C646D0830DE932067D388B8C340EFC35
-:1061800059AA26E2BD0CD7CB35289760DDFB162631
-:10619000913EAC99FFDEAC310057F6C994CFB265A1
-:1061A00029CFD39CF4EF3ACA1379FB31EEF75DF7B0
-:1061B000502DBD9F9421CA67D1CF83B2723D53C287
-:1061C000702E950B2D14BF997C413E13E9A75148C1
-:1061D0007A3CFA173C5E736DAFAC790F6D528FB697
-:1061E0003F60548F764646B7B6DE3EEFCDD353615F
-:1061F0009EF6A5FCE1F68BBF3B827070958EE22483
-:10620000EAFB64509341F14D399881F99B1BCC8C8A
-:10621000E4B96DBED98AF2607F7A3CC9BFF6DB2C47
-:106220006487AECB6F8A433BD9346F550A96238C73
-:10623000C1AD183BBDE6D52D37D92791BC55F355D7
-:1062400082AC1CEC81BB8DDCC8093EF7F45419E527
-:1062500025CF6799F4EA96A783F9D8AD95D6E1D40E
-:10626000B14CBEF97EF876BAB796B8BE701AA11DC9
-:10627000E079A37CD715417B465A703F366DB69CBA
-:1062800069A47C6B4C3282F90D0BFDCC88F58D65D1
-:10629000E6483E57F9E4FBF27F3CC687875F590E1C
-:1062A0005C69DC2BF17B413EE79BA1FC69D310F2DA
-:1062B00054F58F1F29E0FC8B6C4B7AF58C31A67D51
-:1062C000F5AB22CE67E5469EA732BB615A1DDDC302
-:1062D00004BB65CCE77B51DC0BB5A727D23D717BB6
-:1062E0002E0BE3BD4170818EC77BD2F87FED8DB957
-:1062F000141F6A93FC29C13CCC97F0B9F0FCDA0179
-:106300004789307F5B0E97EB2CE4B7E27D358CB389
-:106310003872FDE0EF05B574CCC81EA6F8859E78EE
-:10632000CF698C88B7635C1CE317D1CF4DEED5C223
-:10633000532E68E12A66D0C035662D3CD5AA853734
-:1063400015713B7DBA5D5B3FC3A9851DD907E37419
-:106350003CCFDFC222E249F0F75E7E441C68DD6874
-:10636000FE3E5F76F7528ACBB6E5F0788F639536BE
-:10637000CE91C54212E22F7369543CD6BD663F866A
-:1063800097ED0BA3E341FC5E02F0A1A947318A7CA3
-:10639000F0EA689E87DE3DD2B7BD08CEB3600C5FE1
-:1063A000C7AB1D4D743FC5DAD388AF5C225F69B0BF
-:1063B000BE7C8AE8401D0FF92218B17FE48748F8B7
-:1063C000A151BE37701EE48B60A4FE2CE936D0FBD1
-:1063D000AB62BEA1F843E5CF72718FA2E6DDF4890E
-:1063E000B1D4BC9B55225F705754BE4E9FA3361943
-:1063F000FDE7BEAE95F1B1F810F92E68E27C88E5B4
-:1064000006917F837C182CE27C88F5A6EF56786392
-:10641000D98B0B055DDCBF63C9864F22F6B7AC7321
-:1064200085065EBEEBE10D91F951F7E33F3008BF01
-:106430009E517EED52B19D2F4FFFCB2BCD0CCD4801
-:10644000DF0728CF96159C31F27BA75E239EEB4297
-:1064500061FF99CCB3F2D12FDB11E2F26C9D88374A
-:10646000345B1533C681993B5513C750E3114D4B2F
-:106470005CB654D847727F7CC16BA57CDCE1F91413
-:10648000DF48AAF1DCCEC632D653649C6B0662DDCF
-:106490008EC156C0E9F957D93341C7C0BE4D17F870
-:1064A0007BC9FDB0EC67248F2EE468EADB449CA333
-:1064B0009FBF2D0BAA703E8BDB49FBB031FF1A1E2C
-:1064C00017D4C6D14CE23DE7C1E33B34F56D227EE3
-:1064D00072E5F1B57139D385BC21C62F8C1ADF1A4C
-:1064E00073FC8171B5F1BDABB8374F714F183A2EBF
-:1064F00036D2CDE9699DDDDF85713183E07F6606A7
-:106500003A9988F280FFE9E3797EAEC1A18D8F19B7
-:1065100030AF0BFA3F97B898E48AFA3EB5FD99057B
-:1065200012CACB27F0FDE8A4C1F2245A8ED844DE6B
-:106530007CB41C81F93470D3C35CCF364B8A0FE531
-:1065400073F47EFE7FF1877589E3BBC8AECE8E778C
-:106550009A2E630FB7058263F1B975F1FEC578070E
-:106560007EF78E91694F94E37BEB8CF86CC58E2996
-:1065700073310FB64DF0EB13693AA2A7F4DBD3B732
-:10658000EA23E829DDE873A13D9CAE13F95FF887A3
-:1065900071B427D2B76D8C31BF6AD7A9B0AD01D61F
-:1065A00011718E6DC29EEE9FEF8ECCADFA8871D2C6
-:1065B0004DBEB1345F7FFEA398AFE587CDB759C418
-:1065C000C3D4F96C776AF76733FA697F36A187D449
-:1065D000F936E3FE62F0D515E713FE75FF7C7769A7
-:1065E000F76733F9697F36F53B1BEA7C2D3F6C3E3C
-:1065F000BBE0CF76F1DE973D9E7F3764A8F7239A04
-:10660000FBF3CCBD66942FED6ABC50E8BB7351FA26
-:10661000AE49E83BF5F97369B914FF3D77F8267385
-:106620002C3D87FA8D093B93093B93093B13E1D934
-:1066300035A7570D077AFCBB1D37CF9541AFCFBEAD
-:10664000FFF4F81C80DFD9F18BB932E8A9D9AF9EED
-:106650007E330B1E29FEDBFB38FCF4E93E07B45BFE
-:1066600082CFCCAD05386918D7CFEABAD57977B9DA
-:10667000B95DB97C751E8F6F829C453DD69CE367E2
-:10668000187FFCCAD19B341FFA2FCFEE4D5F100349
-:106690002F6AB97C75217F1EADC08998CFC648AFDF
-:1066A000DDA8BEC752A77D8F25296923D987712C04
-:1066B0006445399660F6D0FB97D71673BD70335397
-:1066C0001AB85FE12C10791CF4DECB4DE5625C6BEF
-:1066D000E52FB1FD669DE709F477FF79D2BCE1684B
-:1066E0003EAB7973A306DE3BDDFE7DDE4F9EFDB142
-:1066F000C46DE5641E8F9936CAC9DF7B8B882BA2D7
-:106700005D3C143E3F7573FF7E009F1E8ECF540F7D
-:10671000C7A7B537690D9CFFF294DEF4C7894FC354
-:1067200031F13508AF51F8FB939BA97EA01EED888F
-:106730002BE15BC5AB9A5FD82C390BC85E67199A01
-:10674000FC60C61467AC7B1EA4CF483D6BB47B19BC
-:10675000DAA38634C58DF9EFCD7FD1C7CCDB7315B5
-:106760008BF85E523CE57D362719C91FDF9F3493B5
-:1067700061FC59B64C23BCD426D5513EA67E18EBFD
-:10678000447F353A0F5D9F7C3BE509E96DE8614048
-:10679000D99FC7EC31235FE93F56925D4800579976
-:1067A000872E5F290F3D7526CF434F323A315ED891
-:1067B0009E688C9987FEAD9BFB5DFB717F69B81F5E
-:1067C00023FF6E88D8976CE5F7EE589F00F546AB2F
-:1067D0008F51FC5DECFF5B6107A9FD4D563F43F90E
-:1067E000A0372A4EB45FF4A95C7FE0775BDC31E22E
-:1067F000285FBB0DF4FCFDA3AC5CCF99B9DD3EFB7B
-:1068000037B1DF27282B9644BC2436DD0D453737BA
-:10681000EA78DE9DCA97732D46CA079C6BB1D3F701
-:106820006CE60221F6A446F4BFEE56FE3EB5ACD8A7
-:10683000919E7E7BED945FFE96E1B50097DBA766A7
-:1068400018E8BDC25312F328A983F35DBDDE94A9F5
-:10685000B8CC1BEA4FAF45762C18C3C84E7A75C129
-:1068600043AD954EF28FEA8A919E7D73A6A20F7773
-:1068700063C3D877B1FFF2042ECFD5FBA5E509FCA1
-:106880007DDE6B64DF6CECFF55C51749D5485F7240
-:106890006F0EAE2BA23FDD3345F49F5B3C81FACFF8
-:1068A000E6AFDDF5D27739CEA59DF9C8C7E87CEC17
-:1068B000B1EC29F4B758E4BD86901FE87745D6A31C
-:1068C000BFC522CE535A506EEB8E214FD432C33EF9
-:1068D0006EE442A0D78C8CB154AAF5CF7AF475A19E
-:1068E00018E7FC9038E71FECF7B4C36A270EF83DB1
-:1068F000E0EF3C84F8F872E1A9F4F1B0A5076ABFB3
-:1069000026BFC76EECFFCE16F97103B0F6BEB32DED
-:10691000D05B8CDF196088878911F98B62BFF625FF
-:106920006B52D0EF81B3F420DD7604BC236B0D03F2
-:10693000CFBF2CE4080B16D2F306B12E475AEB0C4E
-:106940008CBB382C3ACA7360CCAA9167736A53A681
-:10695000A6A10BBB9C291627FAF75DE41764E0FBA0
-:106960000D189F7CE73686F75F59699D12DA75FD31
-:10697000F388F7C657897BE13E5F2DED27C3D6EF3D
-:106980009731F25FD38273506EF53DC35794F19205
-:10699000B6DD91C6F31FEE5D181F7202BD672DEDC7
-:1069A000C24F4FB00C70F830A69F71A9D9D5827232
-:1069B000E657091477D6B7E7B320C8FBB0ECFB1B4A
-:1069C000C277C8F9902E4F6C169E5BB6289EECB924
-:1069D00076A97506F931F7E858AC78D1CE62EEA702
-:1069E000FC8F622BBFCFB54FE4F4631F3F72E1B859
-:1069F000ABE7FF77849EF949B293DE7F52EDA34D5A
-:106A000043F8478E913A215F845E11F833339F1922
-:106A1000F9452F7979B074C76BAFBD96CEE8535B5B
-:106A200048471B84FDA38E139F1FA2C678C543F25F
-:106A300052B27AB8BEB0FAED4138AF75DFE963CE35
-:106A4000FF85A0FB35D90FD9B17FADD3E7C632FAA8
-:106A50003D98969C7BDD783E2D33FBE995ECBA960C
-:106A600033CEDF613E56F028CF37D89F5D68C3EF45
-:106A700041590E1B64D365E2F146D027CECBD8191D
-:106A80004691AFDE7280E799B658CABA30AFA1C559
-:106A90009256466AD8C2F356D5FE16CB21D20716B7
-:106AA00085DFDF5A507F48B84CC04709AEEB10E194
-:106AB00043ED7750C85D8B1266F85E5A9CD24AFD52
-:106AC000CCB2D78379CAE63446F744662BF017E296
-:106AD000355FC7CC31F4C9BE62AE4F5A4ACABAAAB2
-:106AE000697D327EB98EB5D8CBECA4E711EFF07C8E
-:106AF000738696CFBF137857C76916F9B477AE4E31
-:106B000009D68EC33893F71BA4E716CB027310F592
-:106B10005AE2F8CB8E671A39D478FBD78AF1BE4394
-:106B200079AE4F2CB3E27806C6F7158DF7E1629C7B
-:106B3000FFD5FB7BC02CBD474D301D58D81EEB7DCB
-:106B4000ACFEF313F7F2D1CFFD6079BC561B870280
-:106B500079EC1E09FB5A5672E65035D5F0F8D30B86
-:106B6000C29F51FD927431F60B127FBF3F28C52B97
-:106B7000F45D0CE1A7A4C769F130F03E2D3F876FAB
-:106B80001A781EDE37694C7C874ECBD7DF1CFF3866
-:106B900045939F057CEC31713FC623DEA7F588380D
-:106BA0001DC2186FA0179D04FFF7C7891B9C3FC328
-:106BB000EFAC99408EEB605CC9E127FA3639BA5DDB
-:106BC000C8EF39E2FB0FD178FEC9482EAFA5477A4E
-:106BD0005C78AF519BD69B118BDF5F7CF84206EE51
-:106BE000E7C519FD793B74DFF4E269E7E602C4CB3F
-:106BF00011EDFB6FEAF84D47CEA7F822FDA5C0E5E1
-:106C0000DF2F4B3AB37125D98D0BB8DDF87FFA7DB4
-:106C1000B317E6733B7597A495CF4F08B91C14FCC6
-:106C200060BB20D3F743EE2AF2AD403A6A93AC0B37
-:106C3000502EE73CCCF3F29A1E5BD5B328067FB406
-:106C40008CF2FDD5C808BFBA7CBD91E45EB3253790
-:106C5000F972F728439FBB9FE4947ADE558F9879A9
-:106C6000BE8A8FDBD1E9BE7B290F263A3F65A87E1D
-:106C7000D5239D440F6A7F138E8FF2C57223C515ED
-:106C8000CEA18F81713B2BB733A2D75989C898C049
-:106C9000F163067D997460491C8E6B10FEDC0B6AF3
-:106CA0005CA4A1CCEC8978DE705B99B93A824E9AEB
-:106CB00019CF0F8E1EFF372355FB22ACB1630CA8F2
-:106CC0007F31C694269FED973B6478F2FCB4950320
-:106CD0007CCCE30E43E7A3C571BE2D237BAC0DF343
-:106CE000D2C00E5ED3B06004E2B74DF6BD68033C7F
-:106CF000F47E68A23CEADF0B3EED167C3AD4F9053F
-:106D0000D90130D2187B9C1DC497E2804EC6272340
-:106D10005F34E7EBEA4231F6795CECF332F67878EF
-:106D2000E4F7B3C70F89FE1A7B1CED6D4FD4FD4607
-:106D3000248C76B627863D7E4212F105912774C2D7
-:106D4000E0DCD50D7839313999BE975690C0EF5DAA
-:106D50004EA07F52067EC8ABA7F3D17E992DF57F5A
-:106D60001749F8438C60F047FE05F9620EF3BFB691
-:106D700048223EE2F735781B9F7EE573DE3692D1DE
-:106D8000BA36C0F9E1FD46DBC5F93362DD67A48E92
-:106D900052FD37506511EF13333C9D88FBAC41F732
-:106DA0007451F772786DD39F77AC1FDCFF8672ED5C
-:106DB000BDD9868B3C2E625AC2428F4B9897AA6DE2
-:106DC000BFA9CE107D2FA8B94FBBD96B885E0F7DB0
-:106DD00017D421D69BDD711FDDBF4FCDE6F944A648
-:106DE000658CE204D1F76DA6B15D1E3DDACF0D8C46
-:106DF000ECFDE83839E6A952FCB081B12D12E579F5
-:106E00006BDF7379A6FE73FE7D94D63A9CC70E762F
-:106E100010DAD3D1EF49A8F75AEAF751553CABDF66
-:106E20008F4ABF4D47EB63C129D4AEC6FDF17BB895
-:106E300055E911F9E42B587F7F7A7F2B187BDF9B74
-:106E4000DBEA29CF2073BC7F6C189AB2144678C84D
-:106E50005AC8C86F003C68F2094CD9DB699FE71635
-:106E600033364C223C68DA3340D3D3FDC0426D7ECA
-:106E700001EC530347FBAB57F2534DD9F99795F308
-:106E8000578A639AC4BDE49451E2FB97A5AC14ED14
-:106E9000A2F4DB9EA1F33807E781715F749C62DD89
-:106EA0003B6E82F1D18FFC77C12FCDE26E5BFDAEE0
-:106EB0000FF3C8F41E9B54CED72C0DF3F27BE912CE
-:106EC000467C6E8A6766CC8F972A4C1EC4BBC90469
-:106ED000306C5932327306D4EB453C7B8DC46484EC
-:106EE000995531F3F8A3FA5DA1107D5768A879D4BC
-:106EF000EF2BB2207F4E9D67D077F52EF33CF97BC8
-:106F0000D6E8E76B299EA9CE3F14FE87FA8EDEBF36
-:106F1000D5BC3781C7531D44AF8D03F44AF07C4183
-:106F20008FF83CCA85BBD5667B5729FA0F671E4C84
-:106F300050364A11FB08CED2F3EF037EBFF1FAD7E9
-:106F4000617792BCEFDF9718EFFBEE8BFE22E4DA5D
-:106F50003A7C5909F35E1A19E531A4FBAA3F972937
-:106F6000FF00F6A0911311DF4980F1D63DCEEF1F4F
-:106F700036E3773EF0FEE7C040FEED13166CF7D126
-:106F80007736D4BC5CCCA35D5B32F03E72F47D837B
-:106F9000BD11C689986FB2990513409FA4F43105BD
-:106FA000BFF3ECB96854A6037E6C7DA05001BF937B
-:106FB0009989EEA52AAD7E33FF0EE10A166967EFC7
-:106FC000976EA5EFBD86BF6494BF143ECF88EEC315
-:106FD0009FC3C4702EFFF8DDFB7AE4CBA97D5D7AF8
-:106FE000D4F393FBFCA47FF6D94F3DEDE2E7629921
-:106FF00011911F751D5B54CFE98A9F972CEA275F7B
-:10700000306AF8FDDA5EA3461EC8175BBE46FD6512
-:10701000EA89AA67D33FE3E3F928DE2DDBB5ED5318
-:10702000443ED0DB2ADF5FC3AEA173BC981633CFDA
-:107030006EE0DCD5736EE27174C6C7796E94F79F0B
-:10704000464D40FFC04771E864C42FD8172995DD2D
-:10705000CC8E7958E54C998E72BDB2F31DA487E4AD
-:10706000B33C0F3C7AFCFD5FBE95857EC39EC99DF7
-:1070700059682FEDF9F2153D8E57D5D3CBB03E1997
-:107080004A1EA4584C78AA10B43350CFE34491F56B
-:10709000B49E4AE765E5E4CF504E1A876EDF33D9D8
-:1070A000C2C2E4877526A03DC77C7CFE64B3CA5784
-:1070B000EC2F97705E84819FF654EA526A619F7B41
-:1070C0009E91156CDCD3F34602CEBFE7EC39CD7A46
-:1070D00098FE22F345ACFB5A71EE532B7BC9FE7E22
-:1070E0004AAC2BF96C2FC5A15395DE30EADBD4C333
-:1070F0007AFAFE37B3F0BCC8614CA1389ABA5EFC8C
-:107100006E2A3ED78272DE88FBB3325628EC7E2888
-:10711000332A8355988F9ACC764A486B532B7D41FE
-:10712000A4E7E4A59C9E93ADFEC318BF4F5EAFA33A
-:107130003845F259DF06F4CB92CB6505C9E44AF82D
-:10714000EC10F3B78AF9D4F9D5F58CA8F44BE87EA6
-:1071500024B3E362FEAE2A138EBF5ACCEF14EB5970
-:10716000C5E83B2CC967AD55E82F27839D41DF3328
-:10717000B8E2799A35F345B7274FD99945E7E0B199
-:107180001ED90AE3A5645B365441B9CEA123FF3270
-:10719000A987513C3DA9279DE47D524FA128278A0C
-:1071A000FA69420F703993D4F3502DAF6FA1D2A476
-:1071B000CA17873F8CFB98DACBB87C717849BE98A8
-:1071C000D2B87C51E9B856952BCC5A321FEAF70F4A
-:1071D000FFACB5069E7BF773FEFEE5BBD95CBEBC7B
-:1071E000FB25F7FB4D69BFD3A35CAA42C305FA4D4B
-:1071F000BBC0ED33951FABBA25361148639A83E7C0
-:10720000871FBAC89F3B84D9D500AF6312C929959F
-:107210006E6B05DDAEB3EA8349D8FE8189DE773433
-:1072200039CEE598C11EFE83AEF7417CEFF8F73307
-:107230007AEF5D41F5827E434B492E9A846C39E4A6
-:107240005860413E847948AE1E7218E9BC0E083A77
-:107250003E67AFE908C33F5BCCDFFC693ED4FFC1AA
-:107260009EEB40934C3D971E412F5F88F33B2BE8EC
-:10727000A629DD7B53C904FCFE621ECD7BCEFE0D2C
-:10728000BD7FB2DCF61F9FC6FA2EA73A8EFA7C4F5E
-:1072900068A519CFF5D09B1F9F40B4ABE35F237B5C
-:1072A000EFE4E37E339AF8D0123BCF7890FCF3AD55
-:1072B00088967F8B4A860FC8BF7A6691791E12E73F
-:1072C000EB59421E4D55B8DD5E6FE5E7555FB25F85
-:1072D000A6FE8A8BF655AFD28DF2E45AE47F9BF27C
-:1072E00024D14B7D3EA797BD829E0F0A7CCEEC63D6
-:1072F0009DE897ED2F986E190BF83EE2D213FF1C14
-:1073000019BBC65206CF1D2995F04B026C7AC9D61F
-:10731000B5A900CF5224A2A7FA92AD1D4DD07F96F9
-:107320003541A903F8E8F9B31634AF0E05BC8497CC
-:10733000E972F8E354179E1BC7D3CCCAB08CFE4F3A
-:10734000BD63BF8CFAF66DC4AB11E32E1EC1677529
-:10735000041F576A2CB88F23A526212F3DE3515EC9
-:10736000CECA37D58FA1757C7D6C4C1ABE776F5015
-:10737000F8953CA7FFC9827EEACC276B53A0DFCCEF
-:10738000926619D77BD42C91FC3CDAD744F993C789
-:107390003B39ACD22D3D077479BC6F5B7312B66F6D
-:1073A00097483ED52B2F1DE2EA8FD3A73A7E0F0BCD
-:1073B000B6E17730CF29AFB7603EF5B1BE05CFCC8F
-:1073C000013C1C7F533FC4B84D1FADC071DF4C243E
-:1073D0003A9E6D3569F4B18C4E69845EAD1E6FD3F3
-:1073E000C0F54A0DC5D3CF2992E50678DEF35DAD31
-:1073F0007B3991D152DA77BDE87B4CE17C79CCA125
-:1074000023BE3CD6F7B89C8AF05946FB919976DEAC
-:10741000FA921AB2AFCE295BF54467820FD5F154C8
-:107420003A3E8A4F231EED9CFF8FF66DB320BD1DA3
-:1074300075BF23E3395D67891A57D0A1AADFF05DD4
-:1074400071A49FDA51FBF37E86EB5138FE6B94D723
-:107450008F237DD53B64A2A7A3CAFE9A1486BF27BB
-:1074600062D2ECFFFE1DC99AF19775DA3470B45DF3
-:10747000B5CFFDDBA7CBC40E66A447D847F9C23E03
-:10748000D21F77E0FAAE681729EBE8F74906D9452D
-:10749000F9DC2E8AB68754BE6ED689B8AC8EC76525
-:1074A000A3F9DF58FAC3EEF1D82A498EBCBF5BC6F8
-:1074B000BA7390BEE6A31286F11ED075A723FC1501
-:1074C000EB6D8B07397CADCC7669BFBFCABF373F48
-:1074D000BED4771EE59574364CDF6165AB18E507C1
-:1074E000E86B789E115E66AD88D48B25FDF12D8DFD
-:1074F0005DA44BD89B8578AC386BE4F18F9EE8385F
-:1075000097EA1F8525F22BAE522EEA93F9B87BE657
-:10751000F078677F79338F931509FCE5941A695DDC
-:107520008A80F7DC16FB9EB5A454FA41F9A2DF0766
-:10753000DF2980EFAF90E6619E3D55B1D79152CAE9
-:10754000E3B5779778F24AA12C2AF11596225E3D91
-:10755000605FD377C53D649FA9E3BC33CAE316FDE2
-:107560004661C9BCDC0E8FEE07ED63689C86D8E3EC
-:1075700040FB387A7E6EECF643B839FC7D23FB3055
-:10758000D243060C64A6F2522AE3E516FAAE468808
-:10759000FBE70D1ED2F34691AF88371091FCC7F47C
-:1075A000F534BE1C9E41F7582DD82583FBF9917602
-:1075B00094AC846A22E3AD6AB9A894DF73CE28152F
-:1075C000EFF34C6013C8AFA8BCFC3CEAF343CDC357
-:1075D000EC6557C87B5EF363D349FAC3E4275FA524
-:1075E0007D600E4A91DF391F6ABF894A941C8AC2A6
-:1075F000D350F35CED79DC22E8F66AD75D657ACC8E
-:107600004EF9D12ECE076B057DF5DBD53F1E3FBE73
-:107610003F1F86FECAD9FBFE93F87E4A4268A53713
-:10762000C67E5E14FBF931E5C1D370CE1B8CA1FB85
-:10763000D1DE9907A76302D27BC7F2F1F005B09EB5
-:1076400037C5FC2D9695EB6F85475B1CBA98F91EE4
-:107650006FFE787AA20D3FD9FF95E3DCFB6D20A782
-:107660005B1E7DD0ACB08175306BD915CEF947E388
-:1076700013755D6D5B305E624DBDAAF7145A5CAF49
-:1076800024E07D69EDE74D76FC0E46B43DA0C6438F
-:1076900054BDA5C64D54BBA4C2C1E31F33EDFC7B52
-:1076A0003D15F669A4DF0FB2AE1AF2AF303B6D2282
-:1076B000B10AFD19DD5AFBE43ABF57463B2ADA9E70
-:1076C000A84D3345D907BD7A94DF1517B5FD54FE93
-:1076D000F8AC54C45154791765479ACF9F4940BBC1
-:1076E000EBED0B67282E148D9FEB2E5CDE9FBDAE5D
-:1076F0005D4FF783D171ADB72FE4D2FDA011AF1B61
-:10770000C1D4CACC3FC48C80974C7B6B9511EC18CC
-:10771000A38329F8DD36FC5833C60D8D17789C7C81
-:10772000849DFBD7898BC12F85513395A07DC1786E
-:107730007CCE48EFD3995DEF91BDBD09EA86219ECD
-:10774000C79E19A68B110753CF638AC0EF6EE6B7A9
-:10775000E3EF814DB18BF7F72E46DB59FC3C2DA2B0
-:107760007FE2622D3E2DE23C27835B43DF79ECD341
-:107770003E6F11E76B591AFB1CECA3639F43A27A7F
-:107780000E13B6C5E1396C59BC4D8A750E998B2F15
-:107790007F0E5B845FA9D2EFB4AC04B2AFF7A6E86A
-:1077A000E8FB417B13C359CB31FEFDB299DECFAC70
-:1077B000107136B4A4109F6BB797BF8471DB71A3AF
-:1077C000F5748E7B25D1FFBC8EFFFE60CF78EA1F5B
-:1077D00027B383F8BB8007FBAAE9BB1BD1FCBBD353
-:1077E0007A00DD33B6CEB93D6B019C8325FB8099D1
-:1077F000FB9B83CF07EF3F4A05BE4B7BF8B954A6EE
-:107800009DD4A3BD5EF266ECF351E38F7BA49D3A59
-:10781000202B36AAAF8BFC98913BA3ECE9B32D64E7
-:10782000675BC647D5F7C039D1BD8E9FEC16D9A18D
-:107830003DAFEB8738A74A1187307F7D8AE265FB31
-:10784000FA4E717EE9D1C62527F75DFE9C5E13E7EF
-:10785000B453C4A17E2EE2009DC27F7E23E0A4F239
-:10786000CD809BEADF0A2804EF0A940B61C1CF7731
-:10787000563ECB4717AFAA84FBED47CF73BF7D7F42
-:1078800062A883BEEF74DE42DF17A4BD4D14BFDBD8
-:10789000077C722CCE49BF1F7834DB4CF1B3A3A513
-:1078A000BFFB7B8ABB7C6BD1F1B80BC7B37A4EEBC5
-:1078B000704E186F5D858BEEA536E04714A1FFEE84
-:1078C0003289BEFF341B0E04EF45543A37F569F197
-:1078D000590FFF6595F1DF1DC8427F618C8BE8A4CD
-:1078E00042EF73223E37BA4F915F1E57D8EE1B8787
-:1078F0007180F17A26BEFB143445AC3B0E6F42E03A
-:1079000079538944DF731A0ABFD1E58654AE2FA399
-:10791000EBFF7534D7831BDDDBE83C773BBAB25015
-:10792000AFEF13F910B3642948BF5F2877DDB11CAE
-:10793000F65B91651FBB11C02DA35368FDFB4A4F39
-:10794000531CF8D88557C621FD1DB3765A30CE7921
-:10795000CCC9DF53871395F97BB79DF22D31F2A483
-:10796000D5F258E922FAFD957FFC7CEFDAD17CDF75
-:107970004C52F50A8C5B81FB4D42F9DEB202F9C331
-:1079800098B983FCCCE873AA705FB388DEF364FC1B
-:107990007B4FBFB6862C783F1CED67027D6C42FFA3
-:1079A00078F7043D7DAFAD5EE6E782E788E7A41F88
-:1079B000A3137E99767C66653E63FAC079601DDE0E
-:1079C000D7D03AF13EAAEFADBF9262F8B583D6C9DF
-:1079D000FC9E58F9B0D1CFCD76B2209A86B3151659
-:1079E00076A19F70309FC6996DE5E3CC12717C9BA8
-:1079F000A0FF59177594DF81F4D680CF95CC2779F5
-:107A000072CCF550571DACB71ECEC641FE469356FC
-:107A10000E09395B5F5245F7BDC7DC07C6A3BEBF81
-:107A2000BE74E5E13227C29FD45441B729A52FD5B2
-:107A3000205D5A942E8A2F4C76CB745D787DB936B2
-:107A40004ED1AF17A3F44BB4BEA88F923B11F7549D
-:107A50004E43C4F9CF729F4B88A483ABC7CB1C2F76
-:107A60007EAF7BD6051EA71D8C97F7E973A503781B
-:107A7000893EEFD878893EA7013CADEAAACB1D8CA0
-:107A80005F156FBF2E79C91A99E71B8DB71F8AAF93
-:107A9000E6D15641AF5C9E5708BE7D3B3B4471B773
-:107AA000B74BF9EF4B1D73FF96E2BFB358A8630DB8
-:107AB000CA45E0CB3942F9E823E44C341E06F8F419
-:107AC0003F282EBFFBF3B7282EAACA2113F225EABE
-:107AD00013C11FEAB999901F916F2FF0EF875E2DA8
-:107AE0007FA87C45EB213F38A48FCC1FFCDFC55F0E
-:107AF0007B71CD18177616523CB8CAD1A5C77BAC9E
-:107B0000C950D23D92887FD23A9C91F53C6E1C5967
-:107B10004F712FA1F7D4B8A6DABE3EBB2B41185542
-:107B2000A4474DC2DE51FDC47D8E53647FAAFA5432
-:107B300016F7FE57AB4FF7087D3A54FBDE73BB795F
-:107B4000DCE7CB433D0F801C9F9C6FA4EFB84C0E2D
-:107B50003FCCDFA3708449FE6F7437911F0CFB6923
-:107B600046A304E67544E6F3A9E5BEF36D0AD6EF35
-:107B700095BBF40AF507FF16E0038656FA9D860DBD
-:107B80008F737D1357F451D6E5DE83BAB34F99E670
-:107B90004AC2EF616F5F83DF010B2A8CBEEB98B5A1
-:107BA000B48B45EEF7A531DCAF9D9CFFD61D076871
-:107BB000DD1FEA69DD6857039D4F969D0E05E7CFEF
-:107BC000F6DB23FDEC7DD9F7DA9D00B77C696C0804
-:107BD000D17AC3A37E01F3EC33578D074B8DED7340
-:107BE0001F18F50BC0C74673D504CCA3ACB6DFDBBA
-:107BF0003E1FE5DAD95B2660FC1BECBC56D4B7838C
-:107C0000F6DFB7CD8CBF3B5DED789FD631A2AFAB31
-:107C100006BFBF5AEDE0F748BED1BE87C64C407BD9
-:107C200039ECC1734F349F0C22DD4C16EB65172FD6
-:107C300051FC41BD97D9739ED347FFF8400FB88FD1
-:107C40006BBF5C45F722B97DBAF926A0D5757D3C9E
-:107C50007F0CDBF17BE058BF28861D00F35CE74B0F
-:107C6000C6F3EBCABA3786DECDEDFB36E083E7F626
-:107C70006470BC44B76F1EC3ED82B8AFDECF7292A2
-:107C80003DC0F57FB0C012F33B55B7A9FAD21A3BFD
-:107C90000F452D5579A5DA23805FB32102BF9BC61E
-:107CA00070FFFD7CA9A703F1F77DE77F0A710BE563
-:107CB000F152CFF631C391AE045FAD9763C601EECA
-:107CC0001CF3A3C52B6E4113EFABBE73E96FE986BE
-:107CD000A6DB41746550E9F821A2E3FF8BF47BE257
-:107CE000FBD0EF207974FE14DDC347D3B14ABF0344
-:107CF00074C8E69B9206E87928BAC17E8B9206E8A2
-:107D00007AA87EFBCEBF1F93DE07C6E9BD2CDDAB94
-:107D1000F4B759D0917A0F5429CE79FDD78CECFE67
-:107D2000A33D46F577C6357E11E83FCAA3AEB072D3
-:107D3000B97FB43797FB193D66BA9F9AE95E29BEB1
-:107D4000BB0D5D23C6AD11F27EA6DB755939AFEAD6
-:107D50000B55DFFD4F7C774398008000000000004A
-:107D60001F8B08000000000000FFED7D0B7454C75E
-:107D70009560BDEED73FA9919E3E881692A085C022
-:107D8000164640EBFF053D7D10321FA7C1180B9032
-:107D90004C8BE0041B49DD60E2903D9EA131321224
-:107DA0009FCD621FCC7866BD390D038C9DB177C025
-:107DB000561C610BDCE237384BECC671189C4C3C0E
-:107DC000C243086C6CD318C743B24ABCF7DE7A0FC3
-:107DD000F56B750BDB43EBCC6457E740A95EBDAA9E
-:107DE000BA75EBFE6FD5D37A3363CCCED817F85380
-:107DF0003DBCAC081A19CB65F4F305FCDBE2F2EBF1
-:107E0000252B63DFB9EECBB443F9932CDF0A671E51
-:107E100063AF5F35CAAC88B1AEA9E3F6EAB387FABF
-:107E20008F75088C15437B12748676EF54C17700EA
-:107E30001E31D1272E9D1E7DDE9F4CFDAECD958738
-:107E4000B3FA329D63687AAF3E8DB159F89B0ECA82
-:107E500020932D33A0CCED5AC712A0CC2CF9369626
-:107E60004C622EB1843193F29EE9CA6BDF15F03972
-:107E7000931983FEEB95F556307F5D0DC031CFCC65
-:107E8000BCF189387AD3C9C9D05ECD970AE369D7E6
-:107E90001DDE9FFEA529F3E430362E57A0F5CDFB5D
-:107EA0008CF94CF06B756EEB023603E78771CCD121
-:107EB000C7A9601E99E9011DE55EDB2AE83F6BAAB0
-:107EC000C9E1E5AF4BF8DE6CC6DF1B3ECE7AC64A91
-:107ED00086C6D9E209C8FA54C68E494CE92F5B6FB1
-:107EE000C167E7F8C37A85B23E536ECD55C4CBEB7C
-:107EF00092C7E10778670F868D6F1DCB583A63559F
-:107F00009F699F8B0E6D7D385C30FB58FAE54F5FA3
-:107F1000C07C4633C78F395D47F8795D32FA903EB1
-:107F20002AAED4EE6293184B96EC87FCF0DC2A99CB
-:107F30001D3E053633F6537EAFB8020404ED9FC2F2
-:107F4000BF1480739B6EEF5A27D0DD166C4C1FA2B6
-:107F500097250B4C1A38962E49D4D49B9AC769EAB8
-:107F6000CB574FD4EC6F73DBDD9AFA431B666AEA9A
-:107F7000AE274A35F5559DD59AF156EF9CAB69FF72
-:107F8000D6EE6F68EA6B9E7F50537F74FFCA11E98B
-:107F9000221A5F88B691E98979053BD2BF884D3AAC
-:107FA000FCCFC59CD3A3F7F7217FC27EBD6EAFB7D0
-:107FB000AD82FED5573F8DE7FDB4F4C5BC7200F924
-:107FC000A356D91798C72B407B8D52AD95BE45F46B
-:107FD0005E633645E41B95EEB60A5611C7AF66DA06
-:107FE000FDAAB06DBDAE477E2E1AD0EB61BE5937EB
-:107FF000B5FC572135FC06C767CCAFC7F584CBA5C8
-:10800000FFEE18937A399E60B57F01FCC4ACC98C31
-:108010009547C7A34AA7B75D37635F6FDDCAFCEA20
-:108020007A2B58A00EE93EDABA673BFC7A926B5184
-:10803000D61DBE5E15FEEF6F865F81EF5FFF23F3F7
-:10804000ED1310DBB288FCE6DF5DEBCFB52B400211
-:10805000BC27157AA8918227128B900E980365830E
-:108060007190F9510ED433C16F8452961C04AF380D
-:1080700068EF34302AEB717E711086A6D245EB355D
-:108080000ECA8D286F452CA9EE9CC7EB8E065E8725
-:10809000F7A82ED5F2BAE73E5E8792EA5E27AF4395
-:1080A0003FAAEF5A8CF5CEB8C0894401EBBE2558E3
-:1080B000370E1E5ACA4BFF05814A99E49638E85D8F
-:1080C000A7A77EEC22AF073771FAD0F283315EF6B4
-:1080D000F9B3195F3D3C3F81BF4DC2FD5CD76F00D6
-:1080E0003CD48A82C30EEFD50C32873F15F7D5E416
-:1080F00090D997E033A033316D88CF8C2C98B14A5A
-:10810000203E790FF1ADCAEDE1E368E9AB1EF55A07
-:1081100001EC3BFCBE3119E530A7A7FAB2E0122C06
-:10812000F1F913D03E7B32FC4B1E4E1F2A5CA2326B
-:108130005FA5B55F8FAAB6321826B75917D15985F2
-:10814000799D2CD987CB6D7150E52F2E2FC2E1562A
-:10815000E5AD391FF86C1AFB3A7C96B90A6AB3AEE2
-:10816000BEABF0D9BA303E93ADF79684F019103219
-:10817000D3F0D9B7899E6E275F4E09837526184FB5
-:10818000F60CE823CA9954C04342243E9BFB1BB221
-:108190001FA2C89737F01758676E7E989C51F45C01
-:1081A000B5AAE7FEA8B3A2DDE2677A11CB707CC85E
-:1081B0002C3B31D273B53CBE0906BA6BA80EF890C1
-:1081C0000F81BE631F15DC06CF9BC9CE62B85A80F3
-:1081D000C7AAE2318C6EAD712F9D90ECBC05F5EC19
-:1081E00018856E4E66A711DFC376BDC742E49DB504
-:1081F000E8CBF101CD3709C7736622BFD540DBC696
-:1082000082E1FD33B10FF09935C87C3E78CFEA08A2
-:108210000858AF46FD9E8DF4CFEA51FE575F09E83E
-:1082200025EAA5E5975B7400BF3F01A4578B7C51FD
-:10823000309C2E64E6D3E37E7CD5FDAFB61F349030
-:10824000BC0EDBFF9A41B0CF004E39D5E420FA1ABC
-:108250006464CFC84EC1C748BEAC21BCA8F6E3AD2C
-:10826000F6266817E8912E627BB340F6D0A76CB370
-:1082700081F305F3FA557A86E7CBAF303911ED3447
-:10828000CBF3D47E6C1323FAA8B6973C556747B856
-:108290000676CC44B824BD0A973F15C7BD60E2708E
-:1082A000F9DA087FD50AFEE4411D3343BBBF4F69AD
-:1082B0000FA35FFF20B7D3FC4FC42B70DDC8F04382
-:1082C000BF07D04E069368E5DD03FF4384F7DC6902
-:1082D000773FDF015DAE28F0FC6F856E3FDA2451F9
-:1082E000B93ECDF5FD7CA0C77F916E7CE266C80FDC
-:1082F0003944F7D5F6CF27901E52F1D93786F410BE
-:10830000C24DF8E8B34483DBAA107538BC0ABFE558
-:108310008CC8572A9C2A7C577C7AAB0BC67BB3E768
-:108320005F131CF621F84B45E77E84FBCDC14F67F8
-:10833000B888EF9235766634F96652FC88A44C967C
-:108340002BA6A23E8873CC85758CCB74D1BA4C36E3
-:10835000A31DFD024B2793F360487382CF8CF0F787
-:10836000A737ECD243FBD6A92233C1FB5BB3BC36A3
-:108370005AA7FE0986EB9993E96103D6E8F377657E
-:108380003E29119C835047BFC7C6F1A29F68F4F8ED
-:10839000E0B95FC7D61C0AC1CBC102EE8F9DCDE705
-:1083A000E5DA171ED97629843FDA0FADD3D4DDBDC7
-:1083B000DFDB762954DE6E1044DC9736858EDBD900
-:1083C000C004F45F5A453BE1A143379086F56B2C1E
-:1083D000787E0AAE0FE78F00FF3FE75B623DFFD27A
-:1083E000A950F68FE1FE69FF241FF90DEAFC1F2B4F
-:1083F000EBFF385F177338A6011EBAB3BFC5709F75
-:108400006A6C7C3F4D50727AE67243F577869E73B4
-:108410007951A53E0F3ADE73121DE91CA8764C99DE
-:10842000F611E97D27D2BB71A8BEB548D7E88BF01D
-:10843000FE730522C17BC016B93D5BA1979D135CFD
-:10844000DDD9E8DF3FAB736C8625CECBDC3A1EE589
-:10845000FD56DB7AA253E6E2EB58C038BFCECBF430
-:108460007819E8D179FEB782422AD68DCCC286F837
-:1084700057F50BE7893ED101FDBBF2D79971DD5D60
-:10848000B6F5661CCF84D6826E383CEABA0FECE6AD
-:10849000F3CECBF489E0E9B2B9B97BC501A83FA31B
-:1084A000AC7B5EEE3A6AAF6AF49F14097FE06743E3
-:1084B000DDE868F5E23C2687BD46C23A736CC6B279
-:1084C0004F7889EC1355BF0DE94FAD9D72FABA9103
-:1084D000E463D7159DCF44F2535E3007DE9FAFBCF7
-:1084E0006D0D727BBE6BBFA35FC4F71C02F9E3F393
-:1084F00073BF4D769D35772EB7E7B3567991549873
-:108500004FF0A13F314FC55B9E565F191D17B7A0B5
-:10851000FA30DED4EAD1592CC090BE2AC2FCF370E6
-:108520007D3BBB40B1D7725931DA2B2D26DF63C8B2
-:108530000F960D423AC2A1E27545818EE820867CF5
-:10854000B06726945DD965B4AFFACCD31704985FB1
-:1085500017DF6643BED0DB8C7EC41BB38A1F0DA819
-:10856000F34DC2FF3325B2B7B08E842F7D3979FC2D
-:108570006E96C786EBEC32B0A648F2A7B680F3FD44
-:1085800007597E920FD1DA8D1B04D27BAA7C376605
-:1085900032D937C278DB8C5CCE805FD22B40BF3EB5
-:1085A000A417A0FF175AB3F7E905A27B19E5F1ADAF
-:1085B00052B1EF120BB91FFE668189CA93CA7E546D
-:1085C0007F7136C33582FCAFAAF23084DF94CAC70C
-:1085D0003365F2F14C222F7395713F2EE27CDC5C07
-:1085E000147BB95F9A337AFB1C4B7A8D87522890A3
-:1085F000E879DD9887492EC5126F39A38837A35DC6
-:10860000A13F07A713B5FD7345DEFFAA20E674B2AC
-:10861000B47214E5412CE9A4E2CF83DECF97FF7951
-:10862000EC47DA68AEE3A399F2D442E093BF9C2E04
-:10863000DF83E596D723DBBBF3632F77D31E8072EE
-:10864000F104DF3723E9B37985B197FB4BD1BE48FD
-:10865000E1F645F8FCCB153D144B79D20465B31116
-:10866000D61F01FF8F8EC2FCCB7350EF727B81E56A
-:108670009EB9A40FB1DFE167B22EC43E067B141C85
-:1086800041B443053992DDED8DFD7E2D7D483F647B
-:10869000AFCC615C1FA8F32F2CE1F87A7A14E0B01C
-:1086A00000DEEA256EAF9BC2E050CBBF2D8CBD7DB6
-:1086B0002AE943E04805BB1FCB0542447BAFA7D066
-:1086C00018737E1A0B78D9E2608D91E4C9C9D8EF8E
-:1086D0004B9A0DCAAAE9CED328D7964B87E7605CA0
-:1086E000F9FBF81FE61BD279BE61A5C1E545FFAED7
-:1086F0004BB23BBC768C47ACA2FACA7CBB43AF52B0
-:108700003EB6DF947CDB056CD7517DE5EF241FDAA4
-:10871000C3DF17D69DC9C6F136EB1DFB18C69D9564
-:108720007C838DE71BAC369E9F106D3CEF60B529B6
-:1087300079071BCF3B586D4ADEC1C6F30E569B929C
-:1087400077B0F1BC83D5A6E41D6C3CEF60B5297908
-:10875000071BCF3B586D6ADEC1D33815E391369EB7
-:1087600077B0DA78DEC16AE379079897E71D6C3C49
-:10877000EF0070F1BC832D72DEC13A947720FFF1D7
-:108780001896A467B85F7F54A9CF067BDD34637861
-:108790005EB56AE7FE2D1817AB0972FC5539785E95
-:1087A000D914B4770A307E4566B0DF04FE65451102
-:1087B000C3F0D5B0F9C3F313DDD9E7BD02FAA3B016
-:1087C0009729BC03E529EA187F3F7CFE6171573B7E
-:1087D0008FE7D6657E8BF03BBB2C4878C3E71887C4
-:1087E000AD53F213B556ADFF2A7FE6B2F9715F992A
-:1087F000D49908F890456DBB88F92F8CBB5EF1D7F2
-:1088000061DCB76A501B7715331BD4B83CCF4B845F
-:10881000C139DFE11C5F046B6A017F2A01E6CFC129
-:10882000A415AE53127C5EA4B7DD1B88BEBC3B45CD
-:10883000C71468AA0464609EA512206A86D254C632
-:10884000ACD24CF29B389DFED7D4BDF1D9280F0392
-:108850007A46046C233CA8F9850458BF3483FC2B6A
-:10886000F2EF2A33FDBF473A50EB82CCF338825DFA
-:1088700062CD802FF96E265C3693ABCE906FEB45C0
-:10888000E635C37341E9379B05294E2D3389F276CE
-:10889000B5CC4165D174576911F0A3CEEC75E17A7E
-:1088A000AAEC6609F9853DEE3CDB48F1E47AE93251
-:1088B000E04900F6F862DA48768AC82EABF81C4523
-:1088C000BB481F2F7822C9AD8AD8EB61B2832A0A30
-:1088D00019C9C72D2CB2FC7CAC84CBCF374B5DDFE4
-:1088E000443CD7FB16D58F872E8FBED04A799B6D1F
-:1088F00061F1C25BFD8A626F4724E7903DB901E9EF
-:108900007AF1048F0DE18816C7782AF6F0EC491B3E
-:10891000C1AE7B7614EC5AD443B7EC2AFB9993FA98
-:10892000503BCAB10E4FBAD0EFBA929038AADDC30D
-:108930003C14678D1CAF796914E22099A8BF13FE1F
-:108940000B9D63EA3A02FB87E5FBBC54E1F88E42DB
-:1089500087E34B63CF17D3A0D4273E610B8D1B77E2
-:1089600059040E9741D0C0F5B962FFFDA024F678F6
-:108970002A81727DA9FC2EF261D574F96758AA7C10
-:108980003BDFE1BA40FC292DAA4F02F9BC667F7695
-:1089900001EA8906DB5EE32A80F7D552F9FD223A27
-:1089A0006FF41F5B1E6EB11E8F47BCF7B922CBA3BD
-:1089B000BB1109C5E44FDE28E2FEE467848728FE88
-:1089C000E4AF8B63BE2F7BEA7386FCC970FE1F5B2E
-:1089D000CCE39D6347018E06285746F1EBA68CC277
-:1089E000FC8D5ABF6EBF3E44CE104185E6696CDCFB
-:1089F000AF6311FC3D9735BABF377B14D6B110F386
-:108A000071B591F5DA7DC531F7AF967E03CA0733AC
-:108A10005BFDA9D0C4BC306FDA50BEB2C9D5AF0F70
-:108A20008D733F38E1E037E508707EB338E672F2C7
-:108A30007C9C1EF975BD19E1E96A067E8DB05F2543
-:108A400025DCFF9B3BE111968876633A43F711E4FE
-:108A500009CF3736297E6383A27F762A72D4532CBE
-:108A600052E92CE5F5B951E8FAD7CAFB8D4A9CB614
-:108A70005162F22B91F47FECE9E6FC3828E7C671ED
-:108A800038EF0DF3CFDF53F4C49ED8D3CF9E0CA0A4
-:108A900093B9B591F17530F674B17402CCBFD4F6C8
-:108AA000F41C90F8B02F9B0D945F9C2EBF580CEFD8
-:108AB0006D8BC2579F2B7869863E3AB0FB5BA03422
-:108AC00042F91090815440FAED55EC6F018E30144C
-:108AD0002004DEF1E8E7F43AE41E7CCE5C6DE47F2E
-:108AE00084C81BCA9F569939DF74A783FF88FE0E7E
-:108AF00033D33993AE20CF9F7665F2FC68383C6A59
-:108B0000FEF46F458F19CF71776516C485F2DDEBE2
-:108B10009B98266FDC7585E785C14F8AD3FA49C9D2
-:108B2000E427858F9F90B9745EA87F24C8DC1F025C
-:108B30007F26505C3CE417A9FECF987CF95CF17F5E
-:108B400002FD1DCD9F1147490F8B30073EFFDD749D
-:108B5000F9DF108F23D0D31FA3D0D39FB0DF7F3492
-:108B60007A62CC11B768CCF071BBB21EB7B58E700B
-:108B70003F2021D31991CE54FA027A9B503276E8E5
-:108B80007D21F3B44A6F134B8ABF3EBD5DC0BEF07A
-:108B9000EFACE1AFECD649D1FB9DB57ACC280FFA0A
-:108BA00032D79BF19EC4D4992E07CE6B11996C00DD
-:108BB00038BB5C3E339E7B003B2FBF6484BCC1CD81
-:108BC000222E3F7EADECFFDC099CFF2A960BBE7D7A
-:108BD000C07F4D6C9701F74D7DFF5849ECFD887BB8
-:108BE0007248EE35968C20F75E56F8E273055F2BDF
-:108BF000DAD629E7995844FB6755ECFD8C342B9461
-:108C00007352D745A4E35B7487E78522AC6714E20F
-:108C1000E0E7C7E4E03C4CCD2B6D40FC3E56C4F190
-:108C200017CDFE7D6A14FCB38900D74AF69901FD81
-:108C30006959FFC7AC48E7118E15D9399C069003D6
-:108C400080DF9559BAB731FCD995A4B587D4F767B9
-:108C50002BFEAE6714E467520ECEC3F11A7E0E4CA3
-:108C60002DCFC53E1EB0B488FBB9FF80FC0EFC734F
-:108C7000A8A458E3E7FEA864643FF7B57F8FDC1A29
-:108C800050E8A8CB11D99E7D21F6FB40E7E060DDDE
-:108C9000EF7C15B9116E6FAAE59ED8DB7B69597A16
-:108CA0009C87C3D1C8B4E7246EF1DF28E02D5D8F27
-:108CB000F368E97725E3FA5F85C3581AF3738CE705
-:108CC00067E831FFC3F9797DA92BBE94EC368F1983
-:108CD000F537D80714675FB939251FCD2AD8676BD8
-:108CE000A996BE934A47A6EFE4D23B40DFAA9CFC7C
-:108CF00017614C53A8BC99A8C89B69A5B1DFAF29DF
-:108D000018AF488E2CAF2B631FE7DB73774E747957
-:108D1000AC9E37FB47411B4F6EBD258F634E4769A5
-:108D2000A9FA2179ACEA87703C8D865E480CD10B9C
-:108D30000D51E4CC68C03136041FB59D02E5AF98F3
-:108D40008DF9A6C0AF9DD839E4DEC7965188134F80
-:108D50000F8D7FC860AF47A0E3DDA5B1CF7FA3BC77
-:108D6000E9377CDB36D2F947A3D5C5283F6273319A
-:108D70003BEC9FB1B395F2F6C605AD9487669D02B4
-:108D8000E5FD98F42EF979AB6CDEA7307D365C9E5C
-:108D90006C8D395E8B72D897F637C5287ECDEBF88F
-:108DA0004A3AF937AFA33C1524EE47B30DCC4EF742
-:108DB000A4AF7CB9FB582F2012302F9AC4E83E761E
-:108DC000A7E1C77ACC471B053EFE5CE6E7F94F9763
-:108DD00077FCA3F09EE5A0317F3B547F519A4DFB79
-:108DE000DE69E5CFBBF69BF39F84A59EB6159EC1B9
-:108DF000F3E153A727531CECC5038F6BECEC5ABC73
-:108E0000C7807EDF0B1E867EA229D33571243B9C52
-:108E1000317F92AE8C509AA8947A5EFA059D6DF8D7
-:108E2000FB3BF7F748E867BD78C04C727FEA819E4C
-:108E3000F85521E32796713EB6063DFE1900AF3581
-:108E4000D3733209EF1D2BF9739179CED4C22B6302
-:108E5000A4009D0FDF91576B0EA5BB2EA9D64C79B0
-:108E6000E45C9D638A1DEBFC1C43FCF4DAFD82404C
-:108E70007EDD2E1150EF9AE1BA867AEC0D89EBC3B4
-:108E8000A9536B49AB752AE71E76E42D3980EFC7ED
-:108E90004FAFA7F13B59647BCC58C6E5F08B0699E0
-:108EA000E67DF18048E7C855BCDE697CD6CB300F43
-:108EB000E0A3DEA6A77BD8A78D4E11E5D0E93481CB
-:108EC000ED822DDFE97885EE99EC8802EF2F4AB923
-:108ED0009FCA6CA9447FA7F7772E8F747E5FA5BFCA
-:108EE000C93364A90CEDC0499E2694FFCCB6E43684
-:108EF0007CF124DFBF4387E6CF03FCCF7DC17F2217
-:108F00000EF7216BCF785CF707A5766ABF450F1F78
-:108F1000BD42F4B0C5C8EFE37875718E03B08E859D
-:108F2000D60111CF4F18528394E76D2AE3F2748B68
-:108F3000CA0F63811FE03D7D06BF07C526DAA9CEB3
-:108F400026072784DEA39E55A6AC970532F1F9C209
-:108F5000F87737D81D8C15F6A6378BB0FE8589EFCC
-:108F60006EC8867A49EF785ECF78F7B36C89B1B274
-:108F7000DE0C5E9FF6EE6793A05ED19BC9EB953049
-:108F8000D478B09B7AB39ABD7938BEA419BF150FB7
-:108F900072147FFD526FD2458C5F3528EB871F031B
-:108FA000CEE3ECFB473AEFE2345BFD782E83C986D3
-:108FB000B0F8193485DC7760A90924FFD4FB0BF3E2
-:108FC000457F3FF6D799FD84DFBB5927D97380AD24
-:108FD000DD5F147E797B2E5CEE6DD9C85C784E8C9B
-:108FE000B16609EF33084CD67DC1E3784E9C5F85AE
-:108FF000479D7F185CB0B5C89F43703D4FE3A87094
-:109000005DCB377951DE7A6B59AE27044FD784E0B8
-:109010000F186C45DAAC1D0FE13E5D1B139C204020
-:109020003DB97C1BEDDBB5B1C11F088E90BA81EF55
-:10903000635B6F09ED639728B7219D9B8CD66E21EA
-:1090400091B1EEB884190CE6D931D6E5C57B6E40F6
-:109050007774EFD89B65741C0038EB8BB4F9A1C70B
-:10906000153AFB83220FE6987679CE015DBA7B0430
-:1090700086F770DC83378CA8FF16F65D3462BEA4D9
-:10908000A3E7A211E9BE03EB304EC7F3C688F96F20
-:1090900063B95EBD2F4AE791D64B1C4FA7B2EE7A5B
-:1090A0002A15E0E9582DD0BDBCF54792E6607D7DDC
-:1090B0002BAE92B1E55587E720B9B438FB9FC27259
-:1090C000251B38950A24B4CCA567F6103DB9624D2E
-:1090D0003CB387E8C9164F8AA6BE7217ECCE0C289F
-:1090E000376668FA31E5FEEA3236F483E7989A94F7
-:1090F0007D5C66DB19C0B8EE3297C13B1032DEC230
-:10910000BECD6232C2ED111C748DD2CBCF3FADE02B
-:109110002B84521C7A1FCFF7F40AC4EF1D6D7ABA64
-:10912000C7D3DCCBEDAEE63582CF2E201EF8BD0DC9
-:1091300077AF40EDEEDEA7EB9311EF1B000F00477A
-:10914000DAF8847D2C114793E9DCD54A055677DFA0
-:1091500039038EB3E23B02DD6755BF9BA0C2BFB2AD
-:10916000A991CE91017C5EA44F759D4DF647E95CB7
-:10917000D5CA89970DA887617D970634F8D4D65B48
-:109180003CDAFACA8DDAFAD132E59EF234360DF9BC
-:10919000E9789920E23924B5FE51D6F9B7F15EE7B6
-:1091A0006ED1790AE9B3CDE89F81FA7EB7E8A2BA19
-:1091B000DA0ECF3B18F19DF8E100F1B140FCB9C5E2
-:1091C000204B35F83D977681E87605B6ABF3670F0F
-:1091D000BD4F75FDF0FA4D55EE5A9C1BE8BB30476C
-:1091E0000509ED907A511693F3882F229E77F9BDE9
-:1091F000C2076FA3F603B8EE4222857DBAEBFE44A8
-:109200009F17E6BDEBCD563AE7765721D0811DF981
-:109210005E47E7D6E6E3792F28EF03796881F22EDF
-:10922000FDA12692EF338D12C977E59C972A2FE492
-:1092300017B5E7B6E6679E213BEBBEE776D279B578
-:10924000C93972C1D3A80F2D7CFE1D4704DF6618F3
-:10925000A723EF34C9CF71323F2FD76153E4682F72
-:10926000C85175FDB0BFE350AE612269411ECD9B70
-:109270006E56A95D263928F86B75E8FF8E53E6DD3A
-:109280005F6DA775A73D7A48C0756731EF6601E647
-:10929000BB823A7CEC50F955EDD7B5F80BE85D563A
-:1092A000AFB5635B45D7E365305FBB6DC0C8CF2DFD
-:1092B000068DA81FEEE0F8DE48E3C3F27574EE50A9
-:1092C000E2FB30473F988076CEFAA339E3D808F620
-:1092D0008DDEACD3C8118314A79137F373B5F26751
-:1092E000A1432B77BE5196A3695F244FD3B4DFDF30
-:1092F00058A8A93FE0ACD4BCFF60539DA66EB2CD88
-:10930000D3BC6FB12FD6D4E373976BDE1FE358A5A0
-:109310006937BDF5A32601ED71B377C00578E8067E
-:10932000DE284B1ED223D312E06528E30A2D562CEB
-:10933000BBF34D744EB67B3CE89744ECFF1D3A7787
-:10934000694E7CC95C03E5DF0BBE5AFC7E0EA0C9EA
-:1093500085F6DB3D4F68E3F0C7AB385FA96543B9DD
-:10936000EBC10A28F35EB067F07BE9817B707FCCAC
-:10937000718CDB45AF99C92E9A89765388BF71B03D
-:10938000BA667E39F67B42BE17F982F532690ABCAD
-:10939000B7CF083B8B7AEE3523F5CBEB1DD085E6B6
-:1093A000F77F59CEE5C1B3CEDA7B71FC8E3ED0B2E9
-:1093B000C84FCF7D6844BFAEA3AF3F01F5D90CE7DE
-:1093C0008746B4CF879E2B7A4E0CC6619CE31F0E56
-:1093D000E923DE63DD5E6EA4F14F2B72BDE53B7ABF
-:1093E0003A4F8BF7376B4A86E473CBE1A01FEF63EC
-:1093F000B7B4F37B9B788E36929C06F9FC61A8BCCF
-:109400007D361DF4C14C1A4FA30F9697F9E9DE3E45
-:10941000C86FCDFB2B97345CC57C25C871EDF34C30
-:109420007E1E96B10103FA7320D735ED1BCB95FB59
-:109430009CD358DE1720072E3823DFDB7DBB8A9FA5
-:1094400033B8E0AAA37D7816F089E7479F1D863FD1
-:109450008ED7DBE1ED65A48190FD1B66FF5771FFA0
-:10946000EAE52872FBA2B2BFFB8440010A55B7337C
-:109470008EE87785B975EDA542DC97CFB7A2BFDE40
-:10948000F22381EEC1FFB2FFAD343BACDF78F8547C
-:109490001ADE97761F3A9586F789DB0CF6CD68CFF2
-:1094A000037DD03DE48E5E3FC1DF7EA8B01F9FB735
-:1094B000F70A0E14C9EE9EEB0DB44E36B015FDA39F
-:1094C0007D51E03A58CEEDABC3E5762ADD2E9813F8
-:1094D000F57E8FC9E713901E403E215C47C00F8286
-:1094E000FABE6DE6A648F6D46505DF27B71919DE82
-:1094F000FB6D83FEB88ED359A78DF8BD8596C3B09A
-:109500002E01D771EE81781C7F8381A19DA1C2F7C6
-:109510007156E0035CFFFBAB0D0CCF2D6F59AD27EF
-:109520007CBFBF81DB27FA877FBD3503EACB802E66
-:10953000F13B0F2756DF389D01E3BEBF86DB69751F
-:109540000F1B882F97AD136EDD4B0EA56B956EFF2D
-:1095500046A1D370FA0DA7DB61F4BAE6EBD1EBDBE1
-:10956000E5B7EC9019A8F761FFE78C433AFA1E7350
-:109570001C407E1A3C611807704FDA2A39C0C36359
-:10958000D3F5BEA7D2506E9CE0EDF96D7B052E7F22
-:10959000ECCB717D19DD4686F7082E2AFB7651D972
-:1095A000373B0B0AF1C8CF626012CAA96C25CEF90D
-:1095B0008A81351D46FF52E4F267FA8F6D7BB787CB
-:1095C000D0EF7F2BE774ABCAC56946E63A6CC5F7A6
-:1095D0000F8D5F04E3BC6CE0E7352728E34DC90934
-:1095E000362C825257C1E5E46F1538D4FA9F143EE9
-:1095F00060277F43F85C68E6F89FB7D1DF8CEBF813
-:1096000099C975BD1CDE5F30E17C1BEABDEE493FA8
-:10961000C9E3DFB973901DEE56F07FA2FC37CF632C
-:10962000EECF32358EF6D772F46909E9D932A568E2
-:10963000DC48F130F7CD6CE64A01BABA9943A55A35
-:109640005F74FCAA7180FC82EB0DC42F37D3E9B99B
-:10965000DAEF5305EEE9468E07D6974A7A1BE4B651
-:109660005816926750F1A0FAE39629FB69BF1E5B7A
-:10967000C728EECFD8D3848F156DE7845618E741FD
-:10968000836CB002BECF2736ADBD3485B19F6C620E
-:10969000CC050B3ABBC9CC5C77037D6C92A81ED875
-:1096A00064A3FABB9BEC545EB638C7A2FE79E0A473
-:1096B000670AE2ED44D61E672DCC73EDAC81F04114
-:1096C0003B06F4FD98426B37FAF4CC0CED377A94F4
-:1096D000EFAD28F03F743383B940BEFC02E7838EC0
-:1096E000ED1B7F4672CFB1E67A03FA49F96D17B7E1
-:1096F00062DDBDF1770D685F7C00FA04E90CEC7E59
-:109700006613509E9C33DA810E9A6FA6D0382FEBE9
-:10971000820DC877DE630243FAFCA0F7BA711CD74A
-:1097200057742DE1F94D74E69F2DAD4822FCB8FB2E
-:10973000F2757C7F8B74A1F729FAEFF94302EE876B
-:1097400079A3FD9D4AEC7F46CF90AFB7D70613A40F
-:109750000872F8028C8B97A3701D5886B73719BD15
-:1097600053F03C419342C7E1ED8B15FA044C1B9436
-:10977000EF2932218D9F23C19F1658526232F94141
-:10978000FE38E0E796BEBAAB22961E817DA8F5CFE3
-:10979000D88721767C343AFCB2257E43E6C3294340
-:1097A00075F42343EF7FA01F19E9FB82A6ACC9E340
-:1097B000468A77B907C0BE83FDEA00C3C99E82F41A
-:1097C0003E8DCA4F8E74D9917FCC71C13DA82FD8E0
-:1097D0005D3AF23BDABD5A7BA841E18706C51E7AA5
-:1097E000B442EB3F819FD45EC1FDA484E34CE33FD0
-:1097F000853F27FFC98C7C05F34E83FD7925D2FE7A
-:1098000054D5AEC77E13D82EA27306748EF415BE3F
-:10981000CEBFA8E07A54E5EB65C8D748BFBD9CAF82
-:10982000C3C76DA9AAF90B1C775B947B10F757F19E
-:10983000F1DA9F13085FEEE752084F1FB3E79CB5BC
-:1098400040971F031CFB802EAF399DF149D0FF9A32
-:10985000CB199F6C1D92031DCFC553BF6D9317A7E6
-:10986000B442FD19A47B18EF93DE3A8A6F3EF41CD4
-:10987000E73F75BE0FFCCB52909F8A0D41A303DAE0
-:1098800033FB2E26A01D587CE4FE14E4C368706EE2
-:10989000AD54E0DCF8D8DA4B299C1EF01CEE5A459A
-:1098A000BFB99FF41B11FF6B3732A2DFFED77ED901
-:1098B000817CFC495FBC84FAF0E3A3F15E94FFD79E
-:1098C0008E997C3A81FC106F22C8B58F0D03F791F9
-:1098D000BD79442FA1FFE83EF6DB3DC88FEED74CA3
-:1098E00068F9B1B57D5DD751EFB5F5DD7B55C4F2B3
-:1098F000A5D1E587F68D8FD37AD5FA6F3799ED2804
-:10990000473F11B99C58DBFB2AD9BF6B076FCCC00E
-:1099100038EAC747FF4F09CA35F79B374A509EB907
-:10992000DFB85182EDEE1FC77B22D92D71B3F484CD
-:1099300057555F66BF276AE2451B14FAC8EEDCD5AF
-:109940003809F0577C6E8903F3B66A7BF1149D13D6
-:10995000DF2FFE797DCAC321FD3A0322E58D8ACE31
-:10996000D5C7AF0EA1CB47AA0C9AEF947DD5380F7F
-:10997000B6E2F72D6FC575023AFA0EECB680C8BF95
-:109980002FBB46F0A1BF01F64B783FB2A7AE3D9288
-:1099900042F71099E89C3FBD08EB531CDBED2856BD
-:1099A000CCA72687D84BCB023ABF09E8A8A9CFE4B9
-:1099B000277B3F205EA4BA62473D74FD3763B285C2
-:1099C00008719ADC77E7A01C0F8FD7C0CF18845B93
-:1099D000B5AFCEA7F3F851A647D22D04B89A3B995C
-:1099E00084781D16D7699A4BF1A2F0F88E3DB0DB52
-:1099F0008CFDEC937512C2ABDAA5B88F3D11E4C0B3
-:109A00005F567279A6F2576780E7F53A03B5E6C963
-:109A1000507E5769EF9174CC0B78E9ECBBFF00C620
-:109A2000173A071F8C9F0EF374BEB798619EE79A92
-:109A3000546B9E82FD06E79A1FC81BA29BF0F91A81
-:109A40002AB95D34642F44D67FA50A5F8F961E2CF9
-:109A5000ACFCF3D083E09F575472FF7C058F9F705E
-:109A6000FF3C5C7FA872591D77AD82EFE172F92A45
-:109A7000D939E047935C5E5B69A7F732FB16A59086
-:109A80007FFDDE9214BB75F8F839A243979C377CB2
-:109A90007CD59E737BE55366F47B643DF1A77B899F
-:109AA000E0C3FC976AFFB99D02D9E5EE66830FDF3C
-:109AB00053E10A2CE1F1D8076483CF220CD989AA9B
-:109AC0001D79ABDD2150BB6A57AAF663C0C9E3BB61
-:109AD0004B8A78FB658B6B55E5585CA7859E17977D
-:109AE000F3E78C394FA15FF5E05281911C50EC4AAD
-:109AF000954EC3EDCE4FFB7212478A433DAFD0A7C0
-:109B0000CA6713C2F843D563CF54707EEB403D5E05
-:109B1000887AFCF71AFB3C7C5CD0E38F57523F46B7
-:109B2000FD8B7E2E3A23F9EB6665FCADEAFE054E11
-:109B3000D620BC592CB019FDCC68FAF57B8A9D1350
-:109B4000ADFD19C57EBC1D3F1F56E4C868F1F3CBBF
-:109B500095B7F270FFA9F9F9967D688C62BF57D569
-:109B6000BC86FB1FA7F7046A90FFFE9781E2EEE137
-:109B7000EF3DA5FA9F22D3ECCFA92CA30EFD23F72E
-:109B80001A1E3FE84EB2BF437ECC5B7A86E3AC053B
-:109B90007F10EDB8476F2651D986F632942B5E3888
-:109BA00047F988156BB4F077634C17FBAFCBA6F37E
-:109BB000032DAC9EE24C2D7D49D216500ADD630F79
-:109BC0009D46BEF21ED0DB0F84BEFF88FABE99C749
-:109BD000E136A6FB28F71A660FB478C2ED7EAD7D9C
-:109BE00050A9C48DA2D9096FF45BB85C39A3273E94
-:109BF000EFC078D34CC68C7D5C2EB837F23849471D
-:109C0000DFE604FC086ABBD27E450C501C8AF26B6E
-:109C1000F0EAD5BEA7D3E83E97ACCD27B5EFFF3924
-:109C2000C9CBF0BC52720F974BEE36BD92472AA1BA
-:109C3000EF97B7833F390EED4BBBFD1B8877808BC9
-:109C4000F948DEC89AB8CB3E25AFF4E9997F253FA5
-:109C500074C5912879A4EE793C8FA47C2777781E6F
-:109C6000E9F4A90CFBEDF3481DBDE7E81ECBEDF2CE
-:109C700049A6AA5B711C8A3B4E14797C77629F20AF
-:109C800061BC6A621F5F77E9B638B2AF1B7EB53A36
-:109C900005E581BA4F9F2CE2F8FDE4FDCF6AB05F85
-:109CA000C9AF44C902EB7AE3FD0D3FCBE075BBD9E8
-:109CB0008EFD36C4A33FF3C9AFD6C7237EDF801223
-:109CC000F7E7C717C4C8F1C9A178756615C59D9592
-:109CD00078B508FA70CC505C27BCDF8B555C6E748D
-:109CE00083BB4271CD233CEFDF9DEE9A47F5BF9ECB
-:109CF000C4F8DF2990291EFD2AD035C68DA6C16281
-:109D0000312FFD3FE35827E691BAC7BA7E427CF473
-:109D1000D73A3BF211F4A7FC93F7B09DF423866A7F
-:109D200031CF33033F5B40F7315229DF738FB28F5E
-:109D3000E9E0CFA25F09D02CC13CF43425DF332306
-:109D40008E8938FE0E836BFB54CC2FF58B8ECDC4E1
-:109D5000048E143C6F199E7712649E2F57F34F6A3E
-:109D6000DE3C5AFE49C07994EF56F0F396B280F982
-:109D70007435CFC4963A29F9B5A5CC43F7427C8017
-:109D8000B3AF73DE6B84FCCFC31511F23FEB2B989E
-:109D9000629F69F38DDB735F213AFDAA79C6C378B0
-:109DA000AEE28EE6C5ECDC0F0D83BB28E9D334F2BE
-:109DB000BBFEF86F09A467FB6E903EBC1634B10081
-:109DC000C51F0778DCBDCF4071866BE0BF8D0DD11C
-:109DD000B3EF54F0718FF7D511FDF704EAE3F1FD0D
-:109DE000DF2BCFB7BDB7E47EB4F7BD01FE1D0BC6B8
-:109DF000B83FD613108BD16EB983FBF2646584F53E
-:109E000099E3B87E0AE7A35285FF4AAB389EEBDEA2
-:109E1000E77E987B03CFAF488A5C707B785EFD74E9
-:109E2000569AA0C6D3C745CABF1C0992DE687944BA
-:109E3000A0EFC97CD9FCCB33E991F3F12B7A2F4603
-:109E4000CEBF343690FC8C16CF0E8F63FF9D2AFF59
-:109E5000A6F338767A9544EB4EF6E4D78C6343EB61
-:109E6000BF83FBB07456847DB883E36F9C1DDBF128
-:109E7000EBCA633BFE13311E7F7B8CC7FF61796C9D
-:109E8000F3EBBA8AD8C2FFDB18C3DF1F09FEFF5706
-:109E9000CF0784E7FFC3CF0B849F0330BDF5B01716
-:109EA000DBBA849D413FC3EF8DBFD624801C149341
-:109EB000F6D37DCE05E53C1FB6ADDEECDB2B0C9D6D
-:109EC0001B50F1F56835F723A5BCEB5EFC5ED404AE
-:109ED00039509F82F1B272FE7743AE59785E8C8919
-:109EE000523AE6C9E0CDF4C56097745B22E7595356
-:109EF00095F1A2E99183D5358B6715E31F3D8A7CE7
-:109F00000EFF874A1C52EAE5F7E999684F5F4CF368
-:109F1000DAD3D11E4A3CC99F27F899BC97E0B267B3
-:109F20002FE67FDC201BE17B46C9FF26CFBB2B1B26
-:109F3000E3D2C96017625EF069CC0F923F2BD17BF0
-:109F4000EA7C9766713FEA190313309FEB9DCACFF5
-:109F500039B19EDF91FDA6E6F5CE1AFC975A05CAE7
-:109F6000EBB523FC3FD5F9F3F6652B440CF8CDEBAC
-:109F70009128DFF876F9DFE5BA681E9EE77B4CE2B0
-:109F8000AF9C40BF19E078EC6821D1EF8AE3E5FF90
-:109F9000D48CFEC76491F03CCCAF54E205179478A2
-:109FA000871A2F50F35BFFACC4493EC0F80B9403F3
-:109FB000180F8172FB2CDD9DD64FDB6745E0FF67F4
-:109FC000041E1FF2FE94C7870A8D8E9CD0F3947FE7
-:109FD000358BEF63AB9FE72FD478CF0F95F5147EC9
-:109FE0004FEFC7EFA1156E9D6E443D5FB8352B0E48
-:109FF000CB19B24F9706F85EB6FAB04EDDBF487483
-:10A00000B45759E7B63341CAEFBD1A96F7BF348B40
-:10A010009F6768A9E6FB7B09FFA018D41F9B226EEF
-:10A0200041F331B14AD247CA2BB5805F8C70B67606
-:10A0300073B8557CB7F8ED7538CFC553C1AD581618
-:10A04000ACC9AEA3B87BDBF5AD68BFB9076F9CAEFA
-:10A05000A67899D18EFEC44303DAB8DB13D53CFE53
-:10A06000FE2A1AE088B77B45F28F0BEF15897E92A6
-:10A070005B2CE4BF261B98DE8AF545DC2E2A684C53
-:10A08000ADC33A5B9244F660C1197BD2C379437188
-:10A09000B0E47B378C453CDD2ECFAAC6D32E5BE4E3
-:10A0A000E3B89F5F35CFDA7EF63D3A6FAAAE4BC577
-:10A0B0008B9A2F8D966755CF3DB81B3FD39CD3709D
-:10A0C0008BC1068C3F161EBD6854CE5F4AB6ECA10C
-:10A0D0003C6CE191EB947F55F3AD6ECF75B2ABA1C3
-:10A0E0009F11FBF76CE2F9D7D7000E2C7B61DDB234
-:10A0F00009EFA1DBA8EC8375E3F3639B72A9F46F0E
-:10A100007250797C531995F899C9F464CCDB5EA739
-:10A11000BCEDD559C3CE4D525E6FB7E8FC08F115C2
-:10A1200092F7A37A78DE4F1FC7E335EE3306FABE07
-:10A13000A1FBAC99E4774D5FEB44F40F3E3FE79A07
-:10A1400088707760DE2D842E3E911D9624F4839DC9
-:10A150000E0BE6DB0AFBAF1AF13C4C871830623C71
-:10A160000C20CFC0238BEE9EEBFCDC6F5F8D05F1E6
-:10A170007BDBFC58EFFFCF8F7D95FC5877353F2771
-:10A18000ADCA9102A74EDE8BE519D9F270889CD832
-:10A19000E6E4F9946D9327111FEE764E4A5A1D326C
-:10A1A0005E67238F5F24DF3BD912FAFC97D53C1FF3
-:10A1B000962C306724795633FBEBDDC71B416ED7F5
-:10A1C00044B2FB3FF929D0E54CA08B23DF9E3890A9
-:10A1D000C7193F341EB7AD71F5C431289F2E98D8EA
-:10A1E000141EAFD3C4E358585E2E5A5C6E45A34E7E
-:10A1F000B6D079A1E004D4DBE1F13326062770BDA7
-:10A200002E67E0BD1498318395B161F9B95F30DFF5
-:10A21000CF27C3FBCB1A75A42FD43C5D41A3C8360E
-:10A22000017D166C34F8283FD7285EA476C56FEC04
-:10A23000940A3290CE3F386B9430AE161E1F7334A2
-:10A24000EEEF9E04FD1D6D02DD0BBA5D1E4F3D0756
-:10A25000DED2DB3F07E36DF96C57773DF4CF9FAC5F
-:10A2600093F0FCF4F07C1E3FFF5DA0D839E171361D
-:10A27000A433B44BC2E3F01B153AD8389BEBADD7EF
-:10A28000147F531D47ED174E3F3F9DCDF56DB4B87C
-:10A29000FE5165BCCEC6826D93717F17E818EA93B4
-:10A2A000CEC65AF3E490F176CCE6E7DB9EC1FC60C3
-:10A2B0006A687E90E701C3F382AA9C2BECFF7D03C2
-:10A2C000E27B37C86BD4636E1BCF1F141EAB398380
-:10A2D0007263084EAEB777C39E07C8BE732431BE03
-:10A2E0002EFA7B45DEA302C5E70A167C763C1EEA01
-:10A2F000CC9944F7B0DC67276FB1A23C5A2016E333
-:10A30000BD1EB753B89567C27CD2FDEFACA1EFBCC0
-:10A31000163E907F0EF7E58166039D0F54F5DEFD36
-:10A32000EF3435F0F6BD4FC6617BAEE0B0D8F179C1
-:10A33000237D3F76FE4B7EFABB580B113A90E781A6
-:10A34000B39744E49BCB16D7DF231F152E52F24C54
-:10A35000CD5C4F3FD0B7C8C0C8CED3EACD13599F0C
-:10A36000533CE8465F21E58F52F0FC43DE90BE2966
-:10A370003C0A7A6CCC9DD3633F9D2D113E67821EB3
-:10A3800043789217F13C7DF8FEEF50F63F9A5E8AD3
-:10A39000268751FFF0FB63DE0CC1365C8FDB31EEAC
-:10A3A000538AF63A94E3A2D3DF1F6671BA4E8A62EB
-:10A3B000CFFD49A1DFA8E7A77A4727CFF487D97F48
-:10A3C0001E7963D5FF52F34DAABFF6A0620FAB65AD
-:10A3D0009352FEBBEF37A0728D78BF2139F2FD8614
-:10A3E000870E0968A7A8F71B4E1959CDE1543C4FB9
-:10A3F000ABDC77F22D223BE9D4DFFC62EB8BA97852
-:10A40000DF4990501DB51F3A477ABE1DEC23B2A715
-:10A41000FA7ECBE3AD87F8F9F0F6DEC8DFDDDBAD21
-:10A42000D8DFF53223B9D1AE9CB76DE851F244B70D
-:10A43000E2968F8BA1714BB73D30563DC7EB237F22
-:10A440004F1BC78C16B7EC60413AB7DBB14670A022
-:10A450007EB8DD39DC5DCA79DDA8714C79E473B969
-:10A46000E1714CB95A9BC7B96F96C4F7DB250868F0
-:10A47000EF9A75CE363AB77F4C90229DF35E5ACD57
-:10A48000E5F47C250F72D0C8E9E3608540F76FF0F2
-:10A490001E1EEEFBC163FC1ECEC1027E0F47CD7BAC
-:10A4A000A8F76BA60EE53DE8FE9D7A2F47BD67C372
-:10A4B000988FE05AF45C1C7DC76B87E1908DDBBD03
-:10A4C0005E7E3F1A6510E6434DCC13895F6BAB6B24
-:10A4D000C46A7AEF8EDB4F8F5447F07B7D8A1FE989
-:10A4E000AE8EEA2FACAFD6FA0B540FF717EE54DE50
-:10A4F000E38BD9EC4EFBFB87631C8F9E323BB6F19E
-:10A50000C4EC48FBB6C5A2FD1EAF5A5E56E4DFB0F0
-:10A51000EFC50DBB2FC9F57AB760FFA74ACAA71BC5
-:10A52000289FAECAD5EE317CFC1F29E3A9654029DE
-:10A53000BBA37CD7F9974ABCAC4B947B10EE692F38
-:10A5400068E397D30F69E397337B9335F57CFF7806
-:10A55000CDFB85672669DA8B03F768DA4B2F146821
-:10A56000EAE503159AF72BAFD46AEAB382DAF86505
-:10A57000F5CDC561F7387DB4BE1AA0DCD07E75E696
-:10A580006F6ADECB58A35D579647BBAE891BB5EB10
-:10A5900052C7CDF66AD797D3AD5D5F32E6E3F2BE20
-:10A5A0007E3E2E7FB65DC9C7E558B0DF338D932D53
-:10A5B00068B7A9F7A9D5F7FE2F376658DF407F00A7
-:10A5C00000000000000000001F8B080000000000D9
-:10A5D00000FFB3E46660F8510FC17BB918186E72C2
-:10A5E00021F84301CF6786D06A2C0C0C1A40CCC6E8
-:10A5F000C4C0C0CE44BC7E714E047B1D0703C34C57
-:10A6000020DEC831F0FE1A487C9D877E76A9F34291
-:10A610006859C181F73708570A3130B40A3330C45A
-:10A620008840F80CA2A8F2554208B6A924657639EC
-:10A6300002F5030024CC7134800300000000000008
-:10A6400000000000000000001F8B08000000000058
-:10A6500000FFE57D0B7854D5B5F03E731E3393793A
-:10A6600064F2200F02F18400A242180284870827B6
-:10A6700021C4A8018380BC54263C43483211A8BFA2
-:10A680006DBD77260411ADB551691BBCE81D1014D2
-:10A690001575A0D1061CE84014B1DADBA8F8A8D5DE
-:10A6A0007650444048C2CB8B2DD57FAFB5CF49E61D
-:10A6B0009C4C48D4F6BFFFFFFDF1F3DBECB3CFD9E0
-:10A6C0007BEDF5DA6BADBDF61EC1329A244E22E465
-:10A6D0005BF8A365842784F4E92CDB0ADA8F9164A4
-:10A6E00042FC2F8BF2368E10EE778EF0A45184BC94
-:10A6F000B5990B98693DBCCF4608AD9FDE343D60EF
-:10A70000CE2264FF08B302EF9FDE9A8FF5C92FBDFA
-:10A71000E714687BD54BBC0075D3BE13CE889D1063
-:10A72000AFB9E5A16BE9F3F69778B2850E45FC93D6
-:10A730004D2485906316C2FE2EB2FA522BAB566D95
-:10A74000DE7F07F45BDE642656DA4FD5EE65D3AEC6
-:10A75000A5F565874402AF546DAB95FAD2FAF200C5
-:10A760001784FA9A7D7FC671DA0A48797028212702
-:10A770007D16225F49EBCE969459F47945606711B6
-:10A78000BC5FB183739BE8FB159BF67F0CFD5734D0
-:10A790008A0379DAFF8AED36220F61637F4B601EF0
-:10A7A0004BA601BC556F88C44CEBE5975649047025
-:10A7B00024D44BA50E18FF614976C03887701C0D54
-:10A7C0009F55CFD071E877D52F706E985AB589789C
-:10A7D000009ED6DDD6394FDA615EB5D260F87EF7DD
-:10A7E0007D12BCB72C50F6B25506F8364B4500E743
-:10A7F000A6CDD2D2A19DFDADD8FEA60EAE630DD9D9
-:10A80000A99EA8766379D247886CEEAC5710A20453
-:10A81000ED0077409A3EACF3F9792E8190D1D03F8C
-:10A820004F644B67FF9430C807FEF7E83F810FF68F
-:10A830003A02DBB23AE9B5D245FF2D77D2EBAC4B09
-:10A84000A59FD09E17DDBF563E0474A0F0D4FB5CDC
-:10A85000583EE24BC372834F46BCFDCA3704CB0659
-:10A860009F1B9F3FE61B8BE5269F82E513BE622C54
-:10A8700003BE527C6F8B6F0E965B7D1E7CFE94AF89
-:10A880001CCBEDBE1A7CFEACEF6E2C77F8FCF8FC0E
-:10A8900005DF7A2C83BE7A2C77F91AB06CF405F0B8
-:10A8A000BD977DDBB16CF205F1F91E5F1396215F58
-:10A8B00018CB7D405F5A867D2D581EF07D88E5AB14
-:10A8C000BE087E77D0771CCB0755BC3B27907C8198
-:10A8D000E2CDA9101715179258A2E48BB49E58CA5E
-:10A8E000EA29B7F9F3255A4FF1D03AC563DFCA70A8
-:10A8F000BE99D6FBD6B0F6CC7B488185D633FDAC6D
-:10A900007DC0834A8195D607D4B3F6C19BFC0571FF
-:10A91000B43E38C0DAAFDE112EB0D1FAD541D69EA2
-:10A92000132293EDB49E1366F5DCB794C90E5ACF8B
-:10A930006D61F5BC8FFD939DB49E1761DF8F3F1550
-:10A940009E1C4FEBE3DB59FBC44BA4D045EB130932
-:10A9500087F5027B7E6102AD17B858BDA85F9920CC
-:10A96000C7E0BF7D626411A1BCB0DD7FB322A4D378
-:10A97000BA145945DC149FFE39580F8B6431B4BFAB
-:10A98000E52F538471B42E91D5D0FE177F05B61FE5
-:10A9900010656C6FF7AFC2F603928CEDA6DA7BB050
-:10A9A000FEAAA8607B72EDBDF8FEAB9282ED836BD0
-:10A9B0001FC2FA41D183ED636B7F8DEF1F943CD8AA
-:10A9C000FEC8DA805248EBFFC179B6005FD7719EAE
-:10A9D00072920DFC1A4C2BA5FCBA8E2373403E1EBE
-:10A9E00000A6A6F2B02E5D5240BFEDFB47DE933CC1
-:10A9F000A7F27632D4973EF54016F6F31CF623D232
-:10AA00007EF89EFB99F8CD585D3F13BF29D7FA69B0
-:10AA100084F7EAACBDEB67DF37E3F5F07C53A1F5D3
-:10AA2000B317FB71F46E5E13BF9DA087E7DB4AADE1
-:10AA30009F83D84F42EFE0098B6374FD84C5655A4C
-:10AA40003F7FC47EFAF40E1E451AA7EB4791966B22
-:10AA5000FD7C88FDA4F7AE9FB074AD1E1E6985D63F
-:10AA6000CF11ECA77FEFE6A598AFD3C363AED2FAC0
-:10AA7000398974CFEA5D3F071C7AFC1C7074E0E7EB
-:10AA80001CC233A877F32A70EAF153E0ECC0CF255B
-:10AA9000ECE7AADEF573C0A9C7CF0167077E440EB5
-:10AAA000E635AC77F32A88D7E3A720BE033F4E0EE6
-:10AAB000E019D13B785EEDA3C7CFAB7D3AF0938A26
-:10AAC000F08CEE1D3C85297AFC14A674E04746788C
-:10AAD000C6F5AE9F5753F4F87935A5033F57613F4C
-:10AAE000D7F56E5E85A97AFC14A676E02717FBC918
-:10AAF000F76C477808EDC7D17D3F07FBEBF173B0EA
-:10AB00007F077EAEC57EA6D07EB27BEEA728538F90
-:10AB10009FA2CC0EFC14229E6FE85D3F0733F5F830
-:10AB20003998D9819FA9D8CFD4DECDABE80A3D7E34
-:10AB30008AAE60F899248CC07586AE9D6E9E7E723A
-:10AB40007DBF7C85A3EFF32E56E75D6E02760FAFD7
-:10AB5000D933A445E1E9FBF61D09B90F9068BBA6FE
-:10AB6000E076C08F835A79D1764DFCD8389D1D95FB
-:10AB7000A024EAEA49C57D75EFF7291DA06B4F9D1A
-:10AB800073B5AE3DDD93ABAB67948FD7BDDFBFA68A
-:10AB90004057BFE2EE1B75EF67F96FD1D5B3D7CF42
-:10ABA000D3BD3FA87EA1AEFDCA860A5DFB55819547
-:10ABB000BAFA35DB7FA27B7F58708DAE7D78D303E8
-:10ABC000BAF611E14774F591871ED3BD3FBA658B84
-:10ABD000AE7DCC87CFEADAC74576E9EAD71EDFA398
-:10ABE0007BFFBAF603BAFAA48BBFD7BD9F4FDED561
-:10ABF000DBDB963FEBDE9FE2FA4CD77E7DDA9706F1
-:10AC00003BD5EE3A768D5AE741AE08FA25FE740937
-:10AC1000EDD5B043C2BAD4D7CEFC14C752F928E55B
-:10AC20001FE9C0223919F992FE51BB21BF6FF99576
-:10AC300011FAFCAEF19E2B5DF4F95D9267B82B869C
-:10AC40007D43F98D236950CA26288DEDF7898CDF65
-:10AC50000B322E0D3E42BFF79ADA0727D0FA703E2C
-:10AC60003F08F2F1326742BB3A8E2735F05E9C997D
-:10AC7000A0DF745F56DE93FE287958DF9FDA195CF7
-:10AC800067BFEB454F1ADA51B59FF8C1CE59D79F30
-:10AC9000CEAB2F21AF709F84FD03E9F7FD97A67916
-:10ACA000687F6689FA19D1E34B74FCA1387E18E4F9
-:10ACB000E1208C3FBAEBF8E6016375E35B32CB75BC
-:10ACC000E35B243ABE8B90DFD77EAE8E4F89309EF9
-:10ACD0009037B9CF717C7366398E7F9F44FDAEE8A3
-:10ACE000F1E33AC66F81F9BFDFDDFC078CD7CF3FB8
-:10ACF000B3423F7F89CDFFA3DAD3EAF87138FF3F33
-:10AD000073A7D9FC332BD8FCCDACDF8EF19D1DF899
-:10AD10008FC0F8C7BA19DF9C3D413FFF2B2AF5F3DE
-:10AD200037B3F14FD65E50C7B7E3F85F7217D8FC60
-:10AD3000AFA8C4F125B3C70DFC2365C4D504E8F85A
-:10AD4000A41F557CA9C02E741C28872452A12164FD
-:10AD50001B3700E1B82B8EF1DB577194DF509FF960
-:10AD6000F1390950CD9947FD4695D757ECC8974022
-:10AD7000EF613BF5B796A8A02E6EE291BFC90673AE
-:10AD8000601085B7B589F7437DF186EB02A05FBD02
-:10AD900066B2A014BE1348189E7FFECB615BA2E78B
-:10ADA000652C97D48BC72251F2D6E1071690213536
-:10ADB00014BE29C004A33BEB9F523F0E1CE38FA996
-:10ADC000DF43A8FFF399C8C6FB0BF5F7A01EA1FE51
-:10ADD0001E3ACEA416BFA3DD1D4EA3F097AAF07FA6
-:10ADE0002A3079FDF4362EE0A7F2F9D58F47A07FFF
-:10ADF000BDE06E1B457A271C65FE245D9DCECB0F02
-:10AE0000746ADF6D0E6CE110BF32E06B3A8A262166
-:10AE10008BD667505C77BEFFC1BEA907392721B723
-:10AE200012454CA5EFDFBE9AEBEFA2E3CE52CCB9B0
-:10AE30006C1D52324C28D724C33496905B1A478835
-:10AE4000B407325D113F8D448D3BA3585F9F55AAD7
-:10AE5000AFB78A8A68A270B54EE7C866DAEFEC39F8
-:10AE6000FA766D9C81A644466775BC528A9374FA43
-:10AE7000683694B9F0D885749EE362DF6AF078177B
-:10AE800089248C7EBCBF0F01BAFA93F1BD792E36AE
-:10AE90006F23BC73448B524AE739A78C0F007F1B8A
-:10AEA000E1FF689F4D31E5D072FDA32231759D8F82
-:10AEB00011FEB91EE37C8222ACF3F3CB8DCF19DFF8
-:10AEC0001C53E9FF29F0072DBF00FEA0F01F55F924
-:10AED000A353AF32FEF09A3DD3801FDA37F204E974
-:10AEE000AAF2CBAD2ABF2CA9D7F305211E11E8B8D1
-:10AEF0006C0E97FB40141FCC56F96059839E6F6E01
-:10AF0000277E313D065DE66ED87C6F9ADC757E9FAC
-:10AF1000A87C33FFC1FD889FAEF36474BA43A5D308
-:10AF2000ED35FAF65B55BADEAED2754EC3C3AF51FE
-:10AF3000F541E6C90111E4DDFB538D9E111D3D3D38
-:10AF40002A3D8D70DEA1D2F38E1F337A1AE18DA8CF
-:10AF5000F48C349C13C980AEF01AE15B707797F9DA
-:10AF6000605CABCC1F9B9EDEA6FC5547A39E57059D
-:10AF70006F5875344ACE566C9FAEAB2F0FCCD5BDF3
-:10AF8000BFACA14CD7BEA47EB9AE7DD1FA3B75F55E
-:10AF900032FF8F75EF2FB8BB56D77E7BCDFDBAF64B
-:10AFA000F9E50FEBEA733D1B75EFCF9EB359D73E22
-:10AFB000ABF4195DFB8CE29DBAFA7465B7EE7DD3F4
-:10AFC000BEAB6E06FE7CEB3D9E803D71C1FD05C6AD
-:10AFD000332FB84537BC73D427235F1FF30DC1F25D
-:10AFE000B8CF8D7C7FD23716CBD6A6663BAC137418
-:10AFF0005D5C4A12086932CDAB5DDF0FD66982EB2A
-:10B0000069C8E4A9F5D37AB34946792869904878A4
-:10B0100024211C2C362A1CED7C547BA487F606AA1E
-:10B02000F893BAB69744623FF73E527605F06577DB
-:10B03000EB03FDCB00BBA74DB5EB8DED951C298D2A
-:10B040007E4EC81A84C36A627647A5C4E4BF7257AD
-:10B050007A0171423D3CB8E672E3052993A7029F4D
-:10B0600064EBE47859C3353AFD4E209ADC07F86D5D
-:10B07000A4EEF98AEDD7EABE3BB59F47B8AB41577E
-:10B080008C8365B1F43313E8E17073E68C6100A73B
-:10B090007214EB4D7DD02E3CE52B5E757410D0AF55
-:10B0A00014CBE3BE39581EF379B03CEA2BC7F253F8
-:10B0B0005F0D9611DFDD58FEC5E7C7F263DF7A2C1E
-:10B0C0003FF2D563F9A1AF01CBF77D012C0FFBB6A1
-:10B0D00063F98E2F88658BAF09CB569F82A52677A3
-:10B0E0003DF1DD71751D3E09FC1783CFA43A7FED5C
-:10B0F000FA099D7C16C7DF877CA6E1B9A4C1ACF232
-:10B10000438A8E1F12C097433EEBA1BD4154F9B054
-:10B11000BBEF63B77BB7FC6BF86DEA0FE4B74E7E0D
-:10B12000CA30F053764FFC348C8FE2A7A92617B3B0
-:10B130007B547EFA19CC23865F310F8C903E51F6FA
-:10B140009A926F82756CA5BA0F421F60FDAC3A7679
-:10B150001D7DB705EDBAC0105837CE0EF9DB60D8AB
-:10B160004738FB21257E56F7F333F249F77857D05D
-:10B17000BF591AA0444FEADA6E8D6378B59A483108
-:10B18000A1EBDAFD839E722F1C8A758124C2F70120
-:10B19000F774478C7EA9AD0CF8ED09AF758EAF72D0
-:10B1A000A0BF638FFD3D0FCAA926662FC735F36880
-:10B1B000B793F0936EC06FC7BA6476A741BCBD7DEC
-:10B1C00090E442BB814CD6E3CF5FA0C3DFFD1447C0
-:10B1D0002DB8EED6A721FE067E3538BD17F8EB490F
-:10B1E000BFF784CF8530EF7F013E7BD28F3DE945AD
-:10B1F000A2C82F34D1F9B7ED1B96FB800CE35E1E7D
-:10B20000DFDAFE9A119E5F7E473E6E4BD1F8B8257D
-:10B2100093801FA4CACBD9C62BE3812E1DFDF44019
-:10B220004FEE779F6482FF7E3A4BDFDF7DC6FEE202
-:10B2300025C20DA7E33A2489C453BF92F76CE3D12A
-:10B240009F7147FC1037D86773D7C9E0379EFCAFB2
-:10B25000B00C3DEBE30B670F3DE9043F6C651A5FF3
-:10B260007334061DB5B22A9855638FF6579AF4F5D4
-:10B27000B3F55C7110E725C7CF1C06EB8CABE6A8D5
-:10B28000087A3F0D4BAD9F9569128E73727B763CA9
-:10B29000F3FF024C9FEC48407D73D267C1F7FFD9A2
-:10B2A000F074D78F060F218DE4330BE873DA96DD47
-:10B2B000FDFBDDCA83705E82F82909895F81BF6961
-:10B2C000A5FF7F3B00FA15B0AEF5EB0DF27EF370F3
-:10B2D00078BE43371EFD4ED6F68CE1BBEEE54E2020
-:10B2E000C734BEA7F4FBABBABFBD62BBB5466FC7E0
-:10B2F00026E8EADEA6F41A9D5D0BFF00C3BD8613A7
-:10B300006009AB54D9B04DB0AF077EDA03C149F044
-:10B310005F38F65E9525227964149716E0D385632D
-:10B3200035FE9767FF99EAA9136F8A04E48C5CA243
-:10B3300050E5A9AE20F29B8998687D91FAF6C2C6C5
-:10B340001525B06E9D78F926F44316935227F8C759
-:10B35000E5A43E0FE2B5A789A918E4F33479C7390B
-:10B36000324A1EAD82849D2E5AAFB7E3A97FAFABA0
-:10B370002F6BD0D797925B5260DF7EE9069104383D
-:10B38000D01BFAF6AF7917F6BB8CD4AC8375FB579C
-:10B390006ABC6BA18B0819546F55FDF6F1BC320ADB
-:10B3A000874B6071166D1F7A7922F37F2A66062417
-:10B3B00085BEFF59E3C85BA906A2DF07D6C17EBCE4
-:10B3C0007F3A716F235DE9F75DE137C2ABD9035D69
-:10B3D000F6C3553892B7734A20861ECB14382667B9
-:10B3E000AABE2B105CBAB8C73443FD7BF35332D1ED
-:10B3F000F1D31EDE93278C66FC03FCC009ED92E7B7
-:10B4000087F49FD6A5FF827F6AFFFD68FF79BAFEA9
-:10B41000A7FD53FB1FD805FE79B1FAAFFAEDF32F64
-:10B42000FBA93EA978F1974E42D7C913427D8A9B6A
-:10B43000D2B572DBBD4E8596C705BF13F8F54480C3
-:10B440002F8E45EF87054E1542C5CE41DC0DFE49D6
-:10B45000FB3FF9ECCF301EF1D536D185F1B4EDE6E6
-:10B46000B099CA6175E3F2129283F523AC7EDF19BD
-:10B470001EEA4D7AFEAB78FA9729901F4239458D26
-:10B480002F85D19EADDEFA7911AC4F5ED28E7264FB
-:10B49000FC0EC6BF9888FAAF4C8AEFDA4EE1C4388A
-:10B4A0008157C58BB7F16767782794377C01FA829B
-:10B4B0007A22E8C71BBF2B57EDD4358223F9988D2C
-:10B4C000FE7B0C19037A51C30B09303BB5EE995F33
-:10B4D000E71CA1709DDAFAA6938BC297264F67836B
-:10B4E0008BFE738FDCBDDE6DA5F2166D0F69EB96DA
-:10B4F000DCA4DAD72156568A6127E4F3546E16DDB0
-:10B500007EFAB8F2F9279F7A0CE2997F32BB07D115
-:10B51000FE573CFFDAFBE3697DC54E31B9844DC36C
-:10B52000CEA574D2C74BFFBF3BB7931E15BF794D55
-:10B530009287B1E7F72476D265C5CEFD1219D615EC
-:10B540001F9383FBA5883D067D82478AC05EA87B4A
-:10B55000E6BF2588339ED8C791D4AC18F8DCFC1A16
-:10B56000DA038027A4A74AAF0EFA19DEF752BA8091
-:10B57000DE36D2CBF8DE2255BF40BF906741F9FBE3
-:10B58000853D9007F591D90D78287F619513E6F3F5
-:10B590008550C3F8FCF17B53409F958BFE141796A2
-:10B5A000EC79F9133F42FE5BF6F68F5230BE4494BD
-:10B5B0007413AE45FE7498E7924DB3709E4B8907A5
-:10B5C000F9B0FC71BE3440CB0B0229DE19434EACFE
-:10B5D0002293932FB650E2D2797E01FE24E8EF77D2
-:10B5E000F8C036B4BBEF24A00F7EA4CE855A0C5809
-:10B5F000BF6061F4FAABBA2E10B03EA3F977EB7DD1
-:10B600002D40A793FD9554D877F112C1AFE283FB8B
-:10B6100096F6CBBF3D2595D189C8429EFA1D5DF7B0
-:10B6200027C37378BF4554AC39BAEFC8B7599DE307
-:10B63000AF56C7A770C7C17AFD454A6CFB354FD4DA
-:10B64000F4005DB7A3F82C4ADE99FC6FBD9FC9BB1F
-:10B6500026FF81E9C5D07EFE309323F80ED6430A3B
-:10B66000573815DBF7CFE4503F503F3A969C6F15A3
-:10B670005539D7B71BF985C22F70F1517C03E324EC
-:10B68000221D70DF65E906FA7D941EF5C2B8CEAEC4
-:10B69000FD6A72BC4CF35B45BD3E209B981EE8DE04
-:10B6A000AEF2239E2AC5C0538F81FC5279F5CB2080
-:10B6B000BF6229CCFFCB1DCDEFCFA372FB655093AA
-:10B6C0005BBD5E35CA6DF9AED12496DC7E69779399
-:10B6D00098724B9FC7945B7B04F9F9FFB45ED5F079
-:10B6E000380CF0784D271E353DD91D3E8D7AF290ED
-:10B6F00020235E8D7A92FE1D26795DF951E3438DFC
-:10B70000FF2A9EABBA02F451079F6A7CD8C1A71AE0
-:10B710001F7689EFEAF0686CBF00FB3414AEF9962F
-:10B720008DD38E5257D2D24E70DF267F268FFBAA42
-:10B7300096F384E5811011F3433F30D58C063B75B9
-:10B74000E2DF6F3D7D1785773EF18B2C2FA05E44A5
-:10B75000BBFFD2B7DF4EA0F399A7E2793E45FB5479
-:10B760004A973902178EA370CE15883F3E11E2B773
-:10B770001CF9340A8EF9E5FA3AFC4D4CE9ECA7A71E
-:10B78000F7BFAB9FF27DCBB7295D3F1D44C8BB50CF
-:10B790008A38BC10CD57D381AE147FDE515C600077
-:10B7A000EAA988501AE577BD2032FBF3EDC219A350
-:10B7B000C1BEC99F3D2C9EF1FB60F47BBDAA3E3B00
-:10B7C000EB97E341CF9F0D65A37F7BF6D02247AC7B
-:10B7D000BCD06695CF5E53F75DDAEC5C3D4FF9BFA8
-:10B7E0008DB4A37DE3B75BC9B618FB821B454D5FE3
-:10B7F000AB74A37F3C1D7F8ECA8773E9A7F1B95153
-:10B80000749B39F584E0EC4A07F8FB34CA0FFBA1BE
-:10B81000F805BE06FC365B2345A531E279CFA9F8D1
-:10B820009B78E06BCCCF2D0CE50B80C7423BAF8BF8
-:10B83000833CA9C9EB503214E09A7860F9CF4753A2
-:10B840003EF61EE2DD908FEB0D9D913C31FC6123B5
-:10B850003EA17FB0338F882EC4D77B62E912C0EB44
-:10B860007BB3AC04F635DF95DC55B1E02C33B3F592
-:10B87000662E29BD308AFBBF0FBFF9B31DE1028AD6
-:10B880008FB37696F7DD95FF98DC9F7571815A0E20
-:10B89000F89067F5642E0071B422E2F9F9040EE520
-:10B8A0007D52B4FECA6F9AFE3CE4F55487389789FE
-:10B8B000B6570B1109F8D8DBB45300FBFD269928C5
-:10B8C000188F106A86CD8C8A7B1D1105C457F3DF53
-:10B8D000E6DD0EF83D37D34C002E65E81927D80178
-:10B8E000E74223510EBA9BD71F7C645AA108FD1072
-:10B8F000E40F233F1425DB74F55993493F37A5DB4B
-:10B90000447364953B06FDEA24C667BDD66F96FF77
-:10B91000CFF4DB04AADF185F8BD1FAED2689F17D25
-:10B92000947E4B8DA5DF56D6CAA9C0172BF766A704
-:10B93000025D57BEB1A44F2CFDF6BA8FF9F76FA880
-:10B9400079E66DFDA87E1B1EA5DFFA51FD1623AE1C
-:10B950003B5AEAA57EB3FCCFC8DFEBA0DF62CCB7D1
-:10B9600058C59FA6DF8A43B5A8DF8AFBF1BA7CA938
-:10B9700049524FFAADEC97B3B02EBA6D31F807F0DB
-:10B980000AFAED0D55CFC138A0E7FE5D727D273D67
-:10B9900057D55B3DF73F84674DCFADECCFA13DD38D
-:10B9A000950F999E5B99C5F4DCCABD4CCFAD1CC404
-:10B9B000F49C51BF1574D16FECFBEA21F47BF423A6
-:10B9C000B37E7D1B6D2F9923BA2DF4FD12593B9F39
-:10B9D00051333A5ADFFDBBD48DBE739FC1732E3DE8
-:10B9E000E9BB3F82BE1B847A6C20C891913F6E1CDC
-:10B9F00068D3E5D3BDF7F5B1E75E0479F9038FFEAF
-:10BA0000F70726E627EDFBFAD84890BBF7001EAAF9
-:10BA1000EF9E51F9AFD5E7477D3A792893F7AA7B96
-:10BA200018FEAA1B3936DFD57C408675E06F17D12A
-:10BA30008FBE7D2FF3A3679B5BFAD8C0CFFF5F2239
-:10BA4000CA25FD2B298BE28739172B30EEB92BCE77
-:10BA5000B905FCCC3902B1801DBBE0D08D27C07E7A
-:10BA60005D70713DDABD0BE07922E9C8FB98DBA17E
-:10BA700027F5F6EBBCA69DAF6590AEF91013CD8C03
-:10BA80002E13577181CD595DF323A85D86F92DC61C
-:10BA90003C89DFABF39FCD47105FE48F7CCCF8E5AA
-:10BAA000EF8D787233BC54ADE6F578AAE162E28995
-:10BAB00052BAA42CA5132FB7BF14599701EDCB3957
-:10BAC000F4B78CF3D6F0669CBF8647CDBF59A0BEB5
-:10BAD0003F3F7424669E8886E72EF9221ADE0DF811
-:10BAE000784BD333D7906120971F983C3F1F0D7C34
-:10BAF000F47B8A170AE7AD7307E9CE2BBDA3E26595
-:10BB0000AAE748618A0C782435C067F3CA77BE96E5
-:10BB100042E777B392950B21F5597F933C108F68DC
-:10BB2000B6B6A31ED4F8709499C98559D52BEFF5F4
-:10BB30007515E27AD3C4B950BEC2063DA7E699791D
-:10BB4000EF61F2D7CCFDF7BA8C518867582E489137
-:10BB5000B65E015DE83FA786185DBC4017FACF6965
-:10BB6000A4FD20E0BD3A997387E1FDA69DF7023F51
-:10BB7000BD6EA5CF41CECB39F716860E7B7ACA654E
-:10BB8000F95888C5C718CCC8EB5C3F17C07B895DE6
-:10BB9000ED9389E696F7008E89546E36C3C300FD97
-:10BBA0002F8AFE46FBC5C8073DE50375C7EFB92AD6
-:10BBB0009E5F073AD801DFED12D843DE305B7FB4D9
-:10BBC00076AF201722DE343A34D1F56514A38329E9
-:10BBD000069E6FD6EA2A9EBD214E84EF6FA0FE6FAF
-:10BBE0001207BB7E5F1FD4F8DD2C77C513C415D2B6
-:10BBF000A3F406E8B7E87DCDEAA6B7115F37AEA695
-:10BC0000E699DC155F1A7D400F5E0E6FDDCA4FD3DB
-:10BC100091987961DF557E4699F5F2B3CFDAFEE669
-:10BC20007088ABEDE550AF9050822E7E30D3CCECD7
-:10BC30009666AB07F9BCFD0DD1BD45EEAA7FA6A85F
-:10BC400074017F25FA7CE2649808E84D97957CA6FC
-:10BC5000CD7B00E3B7E8F5E075AB07E9D75DFF33CF
-:10BC6000CCCCFEEDCE1ED3EAD7C37890D728EBC755
-:10BC700033AE475A5CA9A77979D471BFEFBCB471D0
-:10BC8000BEEBBE8497B4603C4EDB9FD8C37B768905
-:10BC9000603F1673BA7D100A39EE6FFE13FABF5972
-:10BCA0001ADD7DFF103F0A533CBFBEE3498C639F02
-:10BCB0007EF6C834909F15AFF0C442E5AF75878318
-:10BCC00084599E8804764245238FFB5D4408E7CD66
-:10BCD00088B233A827C3F0F1A203F55EC52E73A086
-:10BCE000847E5FF1F26739107F6B5DC3F49FFF596B
-:10BCF000951FFD911CC807A810D8FEBC913E8FA8C7
-:10BD0000FC796AB76D0EE86F6E3B3BC75B119C2DEB
-:10BD10009AA3E20CF79B4516E7DE6DC33C6CFF333C
-:10BD20001CE631037CD1E748B5FCD053CF30BD5C75
-:10BD3000D12406E03C70C5F69DAD1017AFF8D08C4D
-:10BD4000F6AB77FB1909ECD3C92F3ECFCE1B37F1E9
-:10BD5000BA78689738E4763E6C86F8596315EA013C
-:10BD60005A3F82F5A01AF7FB8E71B2152FEE7DD9DE
-:10BD70004F51B8E2374F3BF15C70CB3627C623B743
-:10BD80005F7E5FA04BDC3178BF1A779CFA05C1F566
-:10BD90002176DCF1A4CA2721B33EEE48B627613CE8
-:10BDA00092C299571A237ED1C1FFCF5F7802F6CD98
-:10BDB0004EEDFAF20980BBF29B734FFC94E2932A9A
-:10BDC0002017ACDBDE67DFC37D06EDBBF7557DD208
-:10BDD000FACCD3B84FD3FA27B31B7A6BDDFB4526D9
-:10BDE000EC53B4EEFC3A05E2B8ABF74E417F6DF58B
-:10BDF0004B9353490C7F402B817F03BDD82732D210
-:10BE0000ADB9B13913E03C4DE90EEB77473C3958F9
-:10BE1000C5E2F4B21A47DE117B5FAE4BDCB871C6E7
-:10BE2000CDD7C13ADE28BA65D28BF8F1614ACFE1AD
-:10BE3000BDA0E30E759F2038F5B2F1E3D3F00F4AB1
-:10BE4000AF0B667D1CFE42E392FF7C0CDA1A93BABC
-:10BE50008D1F877B813F6DDF6FBF59211690A35DDA
-:10BE6000CF61DC1EE8477D0FD2FAFC854C88BB1CF5
-:10BE700017DBEFC0FCEBBD66CCA3AAD8FB01CA530D
-:10BE8000EB4B6FE3BE1A51F7DF5A49C71FDB27514F
-:10BE90007D3AEF56078B3BAB7480B8B4ECC4E76ACD
-:10BEA000FC99F1B51697EE2E1E3DD63280EDBFAB54
-:10BEB000FB91555BFF2C1143BC9F1B0BF43A72D9CD
-:10BEC0007D540D0F2EC0C398E8FD96D8F1FF8EFD6E
-:10BED0001603DD809E608F75ECA7D07A3F88AB0794
-:10BEE000B80F62EDDFB56E66FB34AD62ECBC456D3C
-:10BEF000FF65A4C5B0EF12E8DDBE4B4FF3F8AE7896
-:10BF0000CA0627B44F577C9DBA145BBFDF6AE1D4E1
-:10BF10007B03BEE7BE7E2567CC1B98057C59D57890
-:10BF200044027B4A5BDFB4F99E52FDE753CFF278BF
-:10BF30004E645DB019F5BB517F5413163734C25BA4
-:10BF40006E617AABBA89AD1FA776390276DACFA9CE
-:10BF500003BB91AFAB771C91FCB4BF83DB7F234560
-:10BF6000A2F2AC60FD0844C17FEA85FD396C7F898F
-:10BF7000F9EBC671EE52C7F186628FE3DD71463789
-:10BF8000CE0A7F5062E77E2E3FDE4941990DFD9D2E
-:10BF90006C1109E4FD9F0CF2C58118E3CFB5885AF6
-:10BFA0003C8BC90F5D47F11CA6839DBBE41325B4F0
-:10BFB000BB573BC67E08E7FD573B2419E21775B512
-:10BFC0002C2FB5EEDFDC6940EFBA845B713FAEDE4B
-:10BFD000805F57B22B1FE21AAEC2D251C0AE46BD2F
-:10BFE00093A09874F0AF7614A7CA14CEB5AA9D4654
-:10BFF00004379E0BE59D45C5301FDE65725963EC25
-:10C000003B88F652E289C28BE8D29FE3249746CA66
-:10C01000D08F967F53696939888D2E05538C85B1F1
-:10C02000ECDDFC992E9C77DB0ED57F5088EC4A61C5
-:10C030007964B08EB4ED8ACF21C3F143A2507EB4AF
-:10C04000A9CFB91DFBF7835E5AEB244A0295338AC8
-:10C050005599CF86F3AC232C5C36F0E999FF7A85AD
-:10C06000F66B0DF1E857B4D9B57C522501E4CC4606
-:10C070001EC4BC4160E56F933AE134E613127825A3
-:10C08000EA3E8D29BC1DFDA1B39B587C802757FF3C
-:10C090007A028BCF9100C0AFAE2F2B5438CF12E273
-:10C0A0000EC3FB3B1C180F58F6C622941FA0433446
-:10C0B000BE928AF5E75E1BACCE1CF067365A55BFC0
-:10C0C000C6AFB4C0399BC56ABF7D4AF5E762A918FF
-:10C0D000FA415E97A8F2FAE5D2A243988FE6598A10
-:10C0E0007A3E758EFEDCAC314F4B20AA9F1C60FE61
-:10C0F0007397BCADA6CD08B7317F6BC5767D5DC3A8
-:10C10000E327A037AF027412FBE5E2803DE237324D
-:10C11000F8D713467D77FC9AD3F4F8B5CA7AFCDADF
-:10C120008618F1A7C7AFC3ADC797E6977687DFF844
-:10C13000B1FA73C8FF2AFC8A56D58E54F14AFF4AD9
-:10C140002D294C6503DCE94218E5C2284719F63071
-:10C1500007FFEE9F1CA8C5AFDC0ED4EF69EA7CB8E0
-:10C16000C5EC3B1BC8110FF0BA518EE02420E879D2
-:10C170001BF9D875CC0AC4FA8C7C7B4DF7F45C357E
-:10C18000FDD5230BE9579B807F87233FB0F3BE8902
-:10C190002450970572EA76C1FA1DF459DC8B45B834
-:10C1A000F785B8170F82FB5E5C583EA4E6ABB40D72
-:10C1B00025786E30183E9F02FAE9A1DCF669A0F7F7
-:10C1C000BC4B4829E8C11FC5B1F3030FA865BF38B0
-:10C1D00049D5AB856F4C82EF43A20CE7D5DB42DB40
-:10C1E0002C83A0DEC4E33D2ADE84FAAB60FCD6904B
-:10C1F000C8E05A6C090C8238C85E11C76D5D3C01FD
-:10C20000CF6576D86F21962FD216FACCB9284A9FDF
-:10C21000B7363D7A15C4B9369A62E7A94CB19A7E11
-:10C22000D8FA1BEC92B737C5CAF2EA1E1A40E7519A
-:10C230003DFDACBA0E3379B856A5F3AB4B6FC4F9DC
-:10C24000BF14E26458478AF8DB6E1A46E739EE3DC0
-:10C25000418DCFB078E528F5FD3AD02FA85FEBDF10
-:10C26000E5E9C3DD470502E7F446D52C457FEB152C
-:10C2700027E573CA17794A7024F06D612801EFCD64
-:10C28000F17E4CD0AE1FDD22E8F8334F5D57F3222C
-:10C29000545EC044F950DF3E2E2218ECA0000FFC83
-:10C2A00075ED71FDF38556D5EE729214E0F30D979E
-:10C2B000780EF25EDBDA897B0D85BB6D715F84A33E
-:10C2C000ED3C9CFAA5E525BE38D67ABFCACAF8620D
-:10C2D000A344709DD9B8D48EF1C5034B2BAE80F525
-:10C2E000FDAB1F7BAE88758E3C4A3FC5B37C2C25C9
-:10C2F0009E8C05FE5ECB31BCD7A797C6C8F7D7F892
-:10C3000059E36F8DAFD397C67962E5357E63657665
-:10C310005AC1D2219C04FEDA3E0E8FE3B6AEF15C28
-:10C32000F6DC8D9FACC90078BC4DE7D0EEB6843802
-:10C330002596BDB1C1EAC4FE5BD7F86B218FEF2E05
-:10C340002A9CA027BBEF7703FA5B3F81A02C7C6778
-:10C35000A92FC373BC4B2C640BC4BB85FAF45B1CC4
-:10C36000C0FF936F5847E17DACD484EBEB46D18D91
-:10C37000F0FBAB08C1F8831ACFED378D6C8E3ECF42
-:10C38000FC8435FF592BA5C7B35617D225C9E3E660
-:10C39000007EF73FFEDB09F2DD76D18C74ECABFA60
-:10C3A00043DA77AF5999DD36334ED90ADF93F26419
-:10C3B0009413B7C7E95E3C12EE4DA0788F92A34E5E
-:10C3C000FAF9F1BB440FD571149E44BB09F99228C8
-:10C3D0008AECD2C529FD28479A5C903047208F4DC2
-:10C3E000D3AB5C880B3BA81C8CB2D8C3E0772496F7
-:10C3F000D3795310ACC4C2FA6B114E759CCBC63CBA
-:10C4000079CA977970388A6048141271A17F4DDF1C
-:10C410006A7A7A6D02417959FBB010A8A3FD6C12BB
-:10C42000225688AF64297201A41A250A329E17EF9A
-:10C430005F4E30FFD296FD784287DD42857EC4375D
-:10C44000FC8258FB797C9C862FCF1F406FE41C6ACE
-:10C450003F00E68DDBCAC673BF66413BBD437FA884
-:10C46000F65891BAFE8EFBDCC4F209C29348F43E42
-:10C470009B517F68F6C9B8EB226B60BF68DC9F18E0
-:10C480009CB45B05BE1BADCEB7439FA8EBE69810EE
-:10C49000D527F4FBDCD0C866B8072BF76326C75D49
-:10C4A000F4C9213F0FF8FBBE7AC4C81723C2542E2B
-:10C4B000D5F6A132DCA7E1EAA843FB1983DE499E49
-:10C4C0003E2A15ED5C95DF8C78D6E4DB28F7B9774A
-:10C4D000BB9BCD0C2EE6471AC6215C271C7236E8A2
-:10C4E000A5B778B0F7DBF2291E285CBF02F9A3F4E8
-:10C4F0004B381FB801E6BF2174BD15E4E47BAF27BC
-:10C5000021FA75549EF6D3BC273EAE0FAE274EC01F
-:10C5100043F5FEF3EA7A12467A77C8019593E878F4
-:10C5200089C6FF467ED7E4A30E2EDEC8C673760406
-:10C53000D6599E0BE2653066B2C90578D5ECED3A66
-:10C54000D5BE25FE74B4FF56BB88BA1E6506804F63
-:10C55000EA44CD5E775BA2E353AB1D05A997DB4FA1
-:10C56000F55EA4FE59D4391BAFD08EFE9BF7A28492
-:10C57000CFBF37FE9A2814793AFC8D891BDD157FD1
-:10C58000F17184B0FBC2FE9F9FDF0C237FDC277715
-:10C59000CEEF5AE2792542F547DEAAF57536193F06
-:10C5A000399C96D7552F68FB9FDDE901A3BC8FA965
-:10C5B000AC6FC6704B0FF2EEB5A9F8256406E8B370
-:10C5C000F1616AB7647595FFF3EAFCBC3686F7B68D
-:10C5D0005BDB07833CADE73D3571682F464C26B0E9
-:10C5E0002B7613B47BDCFB8F3A51DE5B9274EB4FFE
-:10C5F00057BBC08FF2A9D9A79A5D6A7CAFC32E55ED
-:10C60000D71B2D3ECA355179A1F03C19E7F1031C27
-:10C61000752EE6BFC20157D0634F583D75C05F36D7
-:10C620003A9738D82F1912CE62F196B04E3EBB938E
-:10C63000479B41DE82143FB0FEF9E9FA3788EB1ED2
-:10C640009EB171090C5EAA85C0BEE99747D860D536
-:10C6500004F3C7FBE5B0FB6BFAE5B2FB3237C73139
-:10C66000FB658BA17CC25AFA18CC4B1488DF9CFB6B
-:10C67000FDE10650210EF9649CD200F8B0142B386D
-:10C680008F0C17717394DE19429083BC89C44A9948
-:10C6900063F147D2B9FF48FBCB2891F3813F3206C3
-:10C6A000123C379A118A7D9EE89538F187D9EB8D37
-:10C6B0005DCEC1BCA2CACF4189CE37A9849D83E992
-:10C6C00088FB50F001BFAD8E5B71B2AD17D83EABA9
-:10C6D0003F81E1D9E8BF01C1605E825ABF57228223
-:10C6E0003511FD2B3FF0AFDF6441FFCA46DC41D07E
-:10C6F000B71FC4B1F8EC3ACEBD1EEABF10DA2D70F8
-:10C70000CF8F26379A3C3C34E116B7405F755E7791
-:10C7100036077C5F2A17EF009E5B279C1DBC1667BF
-:10C72000D29EC9F84EE175F9F61AFD9A441DFDAC8A
-:10C73000105789D6F30E6908D8EDAD5C9C1BFCAA96
-:10C74000D6E51C8397B3A8E71104DD3CD36CCC1F5E
-:10C750006953F5E7DFE3B2901FB5F584CE6F3DC6B0
-:10C760007F0DF3E838876A38776A3C979A96DD112F
-:10C77000074AC77CDC5209EE3223674336B4E3BC78
-:10C78000CEF64C12E3BC646AC41AF35CB05652BCD9
-:10C790007D0D784B156B12401FA7DECEF488111F5C
-:10C7A0006D9C7FC441D847FB8318331F452BD3D2E0
-:10C7B0006E4A584CDF4F4BBF014BED79835D8819B2
-:10C7C000574CB2713FECDC6403B118FCCD241BED77
-:10C7D000EFB4E79DF71514FF768CBB37C431BC3737
-:10C7E000C431BC37481A3EE57890BFCEBA5B97F7A4
-:10C7F000B4C1674910200FD19F8EF2B9C4C5E8DDDE
-:10C80000F9BE82F64D1FA2DC301794C406916C432A
-:10C81000BE67F121ED7CC8AF7CCF2440BE94DB968F
-:10C82000A5FAFB1646DF0406F7F90D5370DC14B2C7
-:10C83000C63A98E27969A9C90D71A3D30B3F72C2B8
-:10C8400091E985192D79200FA7798F1BE6974A98D2
-:10C850005FB86C8E1408D32E931BA8C26274BA0101
-:10C86000F73BCB4C31F3AEC7D8D8FEE9D138179699
-:10C870006969D3904E9DF59204F04B8C7C4AE53566
-:10C880007DF1A8CE73CC946F145B0C796B134913B4
-:10C8900087EB5B18F195ACB1B3AAB7357949063986
-:10C8A000847DAB52AA47353A0F505F4DC1B828FE80
-:10C8B00071A1D7BF067FC3795D01EA454D8EC810CF
-:10C8C000A6E7ADA077A3E2A16D7B3FE80FFB8E9FAB
-:10C8D000FCDB3907EC3BFD556877809E3D7ECFBB86
-:10C8E0000E38C7F4C93D2C2E7287C14F5B6463FAC2
-:10C8F0007F8FAD741EE07781EF1F799E287E2577AC
-:10C90000B3FD93E501DE70DE5D7F6F505530C97079
-:10C910008F901FF15AA5DE1F66A4C7461B8BB72C4C
-:10C92000DFB159CA90617C4F258C7F5CF5438F370E
-:10C930003AD0DFD1E059B8638404BED95F4366754D
-:10C94000FFBD4564EB875202FB671E156F46380F2B
-:10C95000AAF76A2FF925CB8F29A363DD4DF5B02700
-:10C96000C4CE7B18E7B1E413B92895126FC9FD1C3A
-:10C97000FADDF0FE3D743DF3DC7D1FEEB319E7D91F
-:10C98000F55E1F05FDB3652ABD8DE76D9785D83E21
-:10C99000F862E241F9EC72FE36C4CEC518E38D6749
-:10C9A0000F65DB000FBFB0A9F1C43C3206CE6DEFBE
-:10C9B0003A3420FE72F7569F52EF8B827BBBA13C2C
-:10C9C000EE2358CE032390E2BF32F4F65DC05FD56C
-:10C9D0004D3BF13EB4EFAA8FAA42279C904BADE9A4
-:10C9E000256A876E03F9208B399D7D5ABDF99CC459
-:10C9F000FC6A869FDBD4E7B7013E7220DF5BFED97D
-:10CA0000044AEFDB2AC5F3D1F7A53D6FD3EFC3F797
-:10CA100076BEDA3CB5796BED556A5E9CF13B4D0E06
-:10CA2000E6A97CB978EBF4757D298AEAF67E91A9AE
-:10CA30009E93C3F3421A9F2D23A545E931F849A3DC
-:10CA40006F07DF847E8EF3D3E8BAB8BE4CC5833F50
-:10CA50004DDD4F4C837895918F7A3AA7DD2A463287
-:10CA600041BE8D7CD2DACD7D28211BB32F16CB4A57
-:10CA700011C4CFA8F9BBCE1565DF1C17EA0FFE1451
-:10CA8000E46E2BE3FB0E3D084E31E8F737455CFFC3
-:10CA9000573AE454B8FF0FE9370EF213CC7E784FC3
-:10CAA0001BE7984F51068A80FF622C4FFA4A958106
-:10CAB000833ADB976E3CE704FBBB6D08C1B851AB12
-:10CAC000430FEF691B8F7AE3B44A8F4AA1E59B3F7E
-:10CAD00083CEDADA827917C72EA971A74BE6E2581E
-:10CAE000F3B4D839DDBD7877A872A8F9350B54FABC
-:10CAF000DD1162FBE90B374D477A74C9BF54FDA1C4
-:10CB0000B2460EF58E913E4BDCD7633EDAA2403E34
-:10CB10007EDF855EE441A4BB916E77DA5DEC1E3763
-:10CB2000A146827BED8E6DE270FF7185107BFF73F5
-:10CB3000B6DDF49DE6639C4777F02FDB5ABBAE2F42
-:10CB400081F98F9080CF8DF06BF35F4214A6A7D44C
-:10CB5000F976372F1299C4F234D4757F399C5B81F2
-:10CB6000FD93077996CFADC6A134F835788DF328BB
-:10CB7000E22BF17C415B038F79D977F8D97D067779
-:10CB8000ACE570FDED8E4E9A5ED1F67BAA9BCA3065
-:10CB90006FCB43FB013BB6ED63C2F629D67378CF6A
-:10CBA0005BB7F40CB17CA5EEE84908A3DB624A3719
-:10CBB000F03FBBDE9F90AF0C8CDE270ADCA00C8C14
-:10CBC000DEB72241CC5759B17DBAEEF98D76358E5C
-:10CBD000A5EAF59EE48FD424C48C6F69F2A6C99FA0
-:10CBE000268F77DA65666F0A81831959809F87D10E
-:10CBF000BFA1FA7A9E9DF93D0FCDA5AF546F3CA71A
-:10CC0000DBA7583296D16B095F82CFBBD3BB140F21
-:10CC10003ABDBDD8AECFC3F8A1F3D1E6A1C98936DC
-:10CC20003FA39C18BF37D2438BEF19E962A407C01A
-:10CC3000097EC65B7B6D813514CEB73806B77FAFF2
-:10CC400015E16E4D9BACC0B9CDEAF4F958FE013E3A
-:10CC50004C07FBB0B4CE8E76AEEA878DEA5D5C22DF
-:10CC600057B5CB5EB22A23D9B9A7D224E09389B5B0
-:10CC700091191617218F3E585C04F7A44E7C383268
-:10CC80000342F1BF7EF04656DF1679D7E286FBFC01
-:10CC90004B8A0A69FD71D02FA02FFA95DBE0FB6E5D
-:10CCA000EBC473F9BACCDE1F652E9DCFEEB166EDF5
-:10CCB00095D43EB3D0F5AEF2F0E057417E2B5B4AFF
-:10CCC0008A212E54091178BADE5529CEB02D87ADB0
-:10CCD000FBE3E97B1FD93C4FD921EE76712DAE8B5A
-:10CCE000958705942F7288C567053A572BFD6E6DA1
-:10CCF0001CB593297ED7265ADCE017D3E77EF09740
-:10CD0000D7262AB21CF55CA31F7C0770AC35B17C1A
-:10CD100082FD6F0C8E8F5CC62ED8EF2325E0CF34BA
-:10CD2000FB2C581ADBF325179EE7C837B17889B179
-:10CD3000FD6DBB76AE49CE00BEA83E24A1FCC31F4C
-:10CD4000D89F5584C9493561E7D0AA0E133C775363
-:10CD50007DA808CFDDC0B9844F757AE05F73EEA679
-:10CD600093AF189E0A04AE44881AB7D06ED5D5F991
-:10CD700054D310980FE1E3DC706E84CF30D5ECA271
-:10CD8000F3E7AFA025C587E072F370FF4CFDE4899F
-:10CD90003CDC9F5527AA792D26763EBE63DD57E5FC
-:10CDA0004F2BFB394A8F02DD4FFFB125CFC6F6531B
-:10CDB000D0AFD6E65BC72984037FED3582E71972D1
-:10CDC000934933E0CF4694B1C06F1647A2CA976C1F
-:10CDD0003F9BFE6540E9369B7E23537EFFFAC19F51
-:10CDE00022FFBBE34DABB2689D73F8593DC3742E6F
-:10CDF0008BB230EFA865F56B4CE706D0BAE858C3A4
-:10CE0000EAB0F14A173EB3A3AEC83F14C67131BAB7
-:10CE1000EE50AE01FE164C2CAE231C90707F47CB1B
-:10CE200057594B7906F8D1E2607A745D6DC173365B
-:10CE3000889B172832E44FEC51EF41FABEA5865784
-:10CE4000DE66427F094AC07FBC83E153A30B69546D
-:10CE5000AE813C5E1254AE817DBD7E0E4FA2837EBC
-:10CE60003FF2AD9689A0CF1BDFF9280FEF73BF8289
-:10CE7000F533F22DEA43D2F99CFE6DFFCDD1FBE4F0
-:10CE8000FD1CF9A9F01D2503DAAF9CEC22B751393E
-:10CE9000AC53882C65839FADF72F1B09D34F1FD947
-:10CEA0004AAF70A03E09E33AF613BB6700D48D7E0B
-:10CEB000336949EC55DE9D947337EE172566347D52
-:10CEC000B810D685DFB17B4A3845C1FCD3173BEE9D
-:10CED0006B231897B2913837C48D899BA4F953D42A
-:10CEE000F89A89F155725E94FFACCE877E5F08791F
-:10CEF000F2636C2CBF81CE8F07FD3A82C8588E84B6
-:10CF0000385936A0D883F53D24F8E14F69FF8F5892
-:10CF1000597CCAB29DE8E28F650E16B779C0C9E2A6
-:10CF20008F7162F016B02BE2CE1017D8156D8F4BB3
-:10CF300002EECF0BAE9B70DFEEA009E3DC4F8B015E
-:10CF400017EC17B55F25C85B48677F6D2ADDB57E96
-:10CF50001F91E4AB20EEF70B27AB3F9D4F308FBB0B
-:10CF6000FD841480FDDCC40C4B4D743C699E83D958
-:10CF7000BBBF7315CC043A04F7C611187FCCBE387A
-:10CF800013D0E3B91DB956E08B170147140F89661A
-:10CF9000D79DD05FE2390A6F163E67F9FD823C22C9
-:10CFA0009EE277FC8D7619EED17ADA1ABC11F3562F
-:10CFB0009F37E1BDC12F4AEEE9507FF1ACEC023D55
-:10CFC000FC7456300EE7F3BC09E7F3625CFBD52B2B
-:10CFD00029DC0F0C61F12EC14604D0CF82A940BEDE
-:10CFE000933E5FAEF2B1A6AF37811CD1FA231CC1CC
-:10CFF000730C82291FE548CB276A6B27984FD467AB
-:10D00000660B0FFC1C375D8B3B857988174D2825F7
-:10D0100068CF4DB08B78CE05F299E1BCDB44550F5B
-:10D020004FFCB8B284E507BB0FC3BD9ECD76F57E3D
-:10D0300030759F7392CA27D791086FA1EDD75D24F1
-:10D040006E88274DBAA8DF8F78CA605F4E51FB57B4
-:10D05000DA5D85F0389FE8EDBF290D4527603D2C4E
-:10D06000208A00FC34D96268073BD209F7F0EB9FB5
-:10D070003FE050FDDC4C92199DC7A6ED434DE18782
-:10D080006E44FBB55872035E76DA950F203FC0DF21
-:10D090002292CBC5259FF2B17CC321176D04AE2C23
-:10D0A000A4FC6987F95CDD50EFB7D2795F3D90F55C
-:10D0B0000F7C08FAE5CAC7939340DF8F57E9A5951F
-:10D0C0001ADF017FB9E2197FB98677CAE7D38E2CC0
-:10D0D0007C4F9337E03BE8678F18981F6BBF9BF23C
-:10D0E000EBD3C0AF3BED04FDB89FA55BE6809C6928
-:10D0F000E3B4AA7C6D2CD7D5AEDC0FBFFBE4BFC078
-:10D10000D68DC2BE17A5E875BF4F0283D72BD7CFE8
-:10D11000980679687611F3CC52D47351D1FC921EE3
-:10D12000C52F1ADFB5DA599C48E39FC9BBDFE5E19B
-:10D13000F9E40B84B8B24887BFA2F1CF447F18F757
-:10D14000812712E69F18F9675737FC937F5E1640D8
-:10D150006F75E19F438C7FBAE31BDA0FDE6B61E4EE
-:10D160009F771CAABDDD2DFF5CC2F3FCABF74EBE62
-:10D17000EC7E65934F9F9F6A2CC7D962E72FBB5403
-:10D18000BCEF96EA6FCA01BD31D5C4CEEF0924E3E6
-:10D19000160AEFEE38EDDEFC9A6CA8EF14981EDA52
-:10D1A0001932A31EDA69F778307E9B6661E757056E
-:10D1B0004F04CE23B8FB5AE4E8DF21D9EE6076585D
-:10D1C000500C8FFB02ECF137181F8C9D9ACB432A31
-:10D1D0005AFA62A617461D9736C3EFCF3DEACCBF79
-:10D1E000007C9606B8A3DF798F4A78CF52F55109B3
-:10D1F000F5E36FF7BD5D04F1512DCF79CC9EB78B70
-:10D200000A86C2FB8CDFFEA1EA65AD8E4740405F17
-:10D210001AEEDD1FD7711E4B7F6F7E29F0514E67CE
-:10D22000BBF13EF9601CDB3F994D6411869871B4E7
-:10D23000F45EB8DECC78AFFCEC303BFF36F3B027C1
-:10D24000F6BDF22A7F18EF37A7F6778A13ECEFE7DF
-:10D250005AF6416884C86CDD0E4A35D7303FA326A4
-:10D260001BF8499343FCA3F80B7E3244F7BB06B787
-:10D27000A9F37FD02DB0FBA92212EE4BFE9CB0EF9C
-:10D2800082EA3A36CAC9F440EEEA17E6039C23CB99
-:10D290009566A0CBB32E16D7F905095BB2816E6EE9
-:10D2A00001F75382A23CF90BAEF33D22940EB1D3A9
-:10D2B000F63D7DE246C2F88F3A3D639C609F09EDE2
-:10D2C00087E0BB31E37347821EB78F589B04EB9A0C
-:10D2D000063785AB789BBD130E0DAE814EC6978F7A
-:10D2E0003ACBC6001EE03BD04B4D478E59E07B8DBC
-:10D2F0001F827BCF303E88E20BE0834EBEE01640BB
-:10D300005DC383A2AECFB7FD8BF8428B6BF4C81719
-:10D3100010B7707E2FBE980B7835F205B5E73CCE7E
-:10D3200018F65C50627993C6E73FB1E7E3FB6E897C
-:10D3300060DE13D96765BF6BE849C07D90DFB8D860
-:10D34000986D9F1CCBA4A62859E56476BDF63B2AB0
-:10D3500023C21CDA9F23A8A2B80DEDBC7EA827DD4E
-:10D360002AFEC8318E83FB4631373E03ECD0701263
-:10D37000D86B23CC256190875DB68919603FE6DACA
-:10D380002664C3FC5F1EB2FA4D58D25EEE5BFE9B74
-:10D39000AD72A77DA5E9C366B55B6DFC352A7F4CF0
-:10D3A00052D87927D0EBD17068EB039009E0E0C246
-:10D3B000B34DDFDA508F8722146F93000E8A87FDFA
-:10D3C0001C6904FB21DFA4244F063BB04F580038F2
-:10D3D000DBF67E9D09F1CE92D0EB1F02BC25DA3E32
-:10D3E000AC5BBF0F6BB4B7357B48F33F347B49F37D
-:10D3F0007BC1AE82F632D51F7199D9BED884B005F3
-:10D40000EF5378E4AC7C95A2CAB340E751A2CEE3D7
-:10D4100066D2827069F7A94C53F1517288FAAB3920
-:10D42000D04EC8548A87A9EA7D2A53DDFAFB226EC2
-:10D430001E1BFB3E15AD9F9EDE37AE1BD71AF6A313
-:10D440007E6879C8C7EE4FF9BD8FF9C3E307F07E58
-:10D4500001D6DFB159ECFE0917C3C32129F63A768C
-:10D460005195EBF1A6480E9CC7DEBFE7EFB86E1EE4
-:10D47000D8F3F7F7C18E1C77422090973BFEC4A8E3
-:10D4800078CC0F182B235F69FD7A3F6FB411F69C9F
-:10D4900044FFDECC410A8F7225C067C1F295538FDD
-:10D4A0003C0AFD9D3F2A90E8731F45926720C4E522
-:10D4B0008BD4DF1D3AC8317B4A6B3FA8FEDEC71113
-:10D4C000956F212143BB67C51C45E7A9EAFD1F1ADB
-:10D4D0005DA71E2F3E21E474A50FFCFD33E2105A18
-:10D4E000FCE19CAA0F49F39FF07CCEF58D770A6092
-:10D4F000BF5F9FC613256ADC1B64EAE947C5214E5E
-:10D500003A0DF66FF3338F4E83BCE5B7784C81F458
-:10D510008676BE9903F5163EE6BD2A46FC5E1FBA26
-:10D5200013EF55991BCFE4A3A7F1C75F4DF96438FA
-:10D53000D09D303B308FDD4B62A4EF813DFF9114D5
-:10D5400019DA3DBEBBA3BF910EAF9C2AC07DAC9E35
-:10D55000E861E4DB7D749EFE2BE177532DC48FBF21
-:10D560009BEAC2FAABBE34AC6BFCEADDFB6412D8BA
-:10D57000791A9F4E49627C336EF7A349C4DE492F66
-:10D5800023DE86C533FE7FC9AAD925EE59D3E8A389
-:10D5900077E93A848CEA272D903756AAC23AFB7075
-:10D5A00011DA25443DCF625CDF66F3B74D0175DAD1
-:10D5B000D3EFFECC94CB7AF57B39C56FD50BB00E8B
-:10D5C0001609AB991E53ED780D1E239DDF23A50888
-:10D5D0007F77F019F9C008E74B1DF9F60AAE07DAB4
-:10D5E000EFE0CC18982526C69887868F9984AEC719
-:10D5F000D9BD5F8F6F8CD7DBEFE78E17FE11D0DAC6
-:10D600009DBC19E9666CD7F447110C908BA51FECF3
-:10D6100093B9F12948DFA28B1251E83A43FAE9CFD6
-:10D62000F593922B91DF56B9D8B3EEF8ADFA224FAD
-:10D630003C233BF94E6C7AD8067CB75BA8B7411CFB
-:10D64000F53AFBF43A10BDC2CF0B66E2FD1511139B
-:10D6500081D0DA94D099668833783F2478BEA120AF
-:10D66000B47F32F0E9AB420BFA596DE7097938CA59
-:10D67000EE6C0AD5D9C02E6B4A66E7F30E26105D14
-:10D68000FEF4C578A66F9A8E9E9DA6C4681FEE62B2
-:10D69000FC3C8328C939F49F45EB297F801FDCC7F8
-:10D6A00081719242CEFD5A32D82D7339F423DAF6C5
-:10D6B0008E792D99C2DB7A7B02EA99294DF7DDE953
-:10D6C000A28408FE63243E6F2FE3F0FE8422D98DEE
-:10D6D000F5A2C559E8F78DF926694609B4DF20A2FD
-:10D6E000DF3385AF14205E753A8DC3AB3CF6709185
-:10D6F0005AF83D62FF74360E71F993C03F7DA7243E
-:10D700006904FE669EACD507E1EF2E1283FFB6FAE0
-:10D71000A573FBCDB47DF52C0EF38DA7B832883FF1
-:10D720008A7F8AD64B38AF5B42A905C0D7338AF5CA
-:10D73000E71EC3AA3D39ABD44602D1FBF99C0BE5E9
-:10D74000FAA0B5FD56FC1DF1BD2281F969727EA3D8
-:10D75000CAEFB3E724E9BE9B4E98DDA9C9D54DAA0F
-:10D76000FCDDA8FACD733D19BAF14B09B387FE4031
-:10D77000DA0B8164F7B8D87EF4B4F696C3F3E125EA
-:10D78000BEDF68D087370D31F8BD7CE55AE48B34B5
-:10D79000CE8DF7C8B8F5ED378FD5D78DF26BD40F96
-:10D7A000B3208B8FEFAA27347D306B2F2F423C683C
-:10D7B000563EC533DAC57ABBBD277D3126AE1B7D0B
-:10D7C0007149BE17CC902EFAE2E3E2EFA52F7E4B13
-:10D7D000DD96B154AEDF8E57D7CDFEA43FE88D293C
-:10D7E000FC8E47818FDAE8BA698EC147DABAA3C5E1
-:10D7F000018AA81CA31E38C5F663A65C4C27FE91BF
-:10D800009D71800E3D42ED12770C7BA9353E1BE5E4
-:10D81000AB43EF687A25CA2E11F37EB85D3285DA04
-:10D82000A3522EC0D70FE12B52EF252982842B88DB
-:10D830001FA69DC1389057A0FE2CAECF4F227F81EE
-:10D84000FEE3123BE5C368AF6871E80A97664FE9EB
-:10D85000F9A5231E3993DDC3AAF14911E013E47F32
-:10D86000268FFB04FF1BD47F03B300800000000061
-:10D870001F8B08000000000000FFC57C097854558C
-:10D8800096F079F55E2D495592AA6C148BF012B67C
-:10D890008424588480EC165958A314A080CB688146
-:10D8A0000B6B129A719CEE69FFA642024343B78349
-:10D8B000D2DACEE8F457D83A831AB40801039DD0DF
-:10D8C00015504C5834082EF8D91A6D1AD10E4984C7
-:10D8D000D646BBBFCFFF9C73EF4BAA2A854DFFFFF7
-:10D8E0003FDF9FB47DB9EFDE77EFB9673FE79E97E3
-:10D8F000DB9B55B3AD08E0F6998A071400D0F177A9
-:10D9000022C042E07FC3ACAD16F08EC7BED7FC6923
-:10D91000870DF8E73BFC2F9C90FC2CA450CF0B907C
-:10D9200009B054CE5FFC577D333D5E3C277AFE52F2
-:10D9300098FDB9920C701BF8CD301CF7F3C58EFF23
-:10D94000EC4B15C7972E8B7E9EE94C4ABF9087FF04
-:10D95000180123BE5301CAD4BA9DB722BCDD275596
-:10D960008F554C33D1FE0F39C5FE0F35970C807C97
-:10D9700080DF7416A7F8B13DB611211C0DD0BAD1C5
-:10D98000C6ED71EC07F1C5EFE8E7663C9F05FC21A9
-:10D9900007B6B45221B701480518EDC4452760FF0A
-:10D9A0002A9E3F0DC78624C0EF73245CD900AFE7E1
-:10D9B00098E704F1BDC3B85E00D70DE3FA015CF748
-:10D9C000C84627F75FDBE8E6FE0D2E446A06C0FA7C
-:10D9D0001427AF372FF776871FDF5BE3CCE6E750DE
-:10D9E0003EDA44F836E02F7B6A080410DFAF77ACEC
-:10D9F000D09474802AB7E2B166F5D1014FE3588E16
-:10DA0000F3CB25BE2BB72A10C4E7E51FAE2B07C406
-:10DA10005F5733EE87F8A92A558336FC6749D363ED
-:10DA20003B45DF0CD608FADE228E0233B516CD86D2
-:10DA3000FB2CF0281E15F7F13689F76FF52A411DEA
-:10DA4000FF798B279A1E8763E8BE58AEB380FE0F1E
-:10DA5000DF5B30470986719D0593A2DF5B7C75D63D
-:10DA6000E7CAD8FE7CB498E83EB63FBFDC4E74B738
-:10DA7000E33F86C130A2FB958BA56F8D853EBAC56D
-:10DA8000B6B1748E1DBF169DEF273A675C9BCEC65C
-:10DA9000FB7F8BCE0F114E90BE70F41B8B9E04301B
-:10DAA000BBE9071AD179F6558DD7AD32CE3314863E
-:10DAB000D279FED459F86FB742DFFCAAA62F2DFE0B
-:10DAC000826B9FE76FEDBF2245E7FD695F6F7EDFE9
-:10DAD000BEF33480C178CEF939D1F88DA56B2CBD59
-:10DAE00016CAF762E9B535E61C065DA013996860B1
-:10DAF0001CBC5F55198E6BD1AD972E16FF084F7E5B
-:10DB0000FF71805FF3B9FAD693748276CD5720E027
-:10DB10003247C803F2752005E95BDE0AE14404ECF4
-:10DB2000968B733ED7A8F528F069C439E8E753838C
-:10DB3000CE6ADFFA655707B2FC19FB966910B0147C
-:10DB4000D2732197B1F055D23A23697E80F968CB20
-:10DB50002ED3B2109E63BA05EEF5519B28DA034E20
-:10DB6000A1071A9D265EB7FB2B9B096E0478E5F092
-:10DB7000806240F83C56E709D28B2133F0FB45C95F
-:10DB80003ACFDF9C048104DC1FB4769B0FF9442B51
-:10DB900006C84139D306598235B8649D16F691DC22
-:10DBA000757B34A846B9BBD178EF48E02E40926C23
-:10DBB000FE7494A9268BDE0FB74FC57937156AFA24
-:10DBC000369CE2B2EA3FA0F1AE66AB93DEEB3EF8E4
-:10DBD000CF2D665AE72BF02084F05A3332158E4F42
-:10DBE000739883A437CAD493AA09FBDD3D00A48FA0
-:10DBF000A62D0B9700D26D3AB4D738B19D42748CE4
-:10DC000043BFBFD0793384DE1A88749A21E9344344
-:10DC1000EAAB926695F54649921A84AC3EFD74B320
-:10DC2000A4D18C407B490AEE3B43533C35D8BFF925
-:10DC3000AA16C58F2F933EBAB14F1F95C9F5BD3DAA
-:10DC4000BA869601664234FF96350A3D54628B7956
-:10DC50002EED0FBEC97C55E68C1E9F42BA13F9FB10
-:10DC6000628C5E8218FB53A6FE35B903F1F08AC5BB
-:10DC7000FBDE5484BBE7B4199EC5E770113B93FBF0
-:10DC8000E3A731C61EC5B6070F277A7584EB15E2E8
-:10DC90002307F50779F5B1D79E3FB6A3A7988EF174
-:10DCA0004ADD220DB2992DCFBA33FBF0DE0FBF92C1
-:10DCB0000EB178AD977ADEDBE87C8D8EDB0F8FAD11
-:10DCC000B3D89E97FC49D748F5FDBDF834E4E595F7
-:10DCD0000B895EE2FF572E0CF2B2FD4AD2593E0C80
-:10DCE000793878FE7222E951C4A7AE219FF4B86C4E
-:10DCF0009E67999F851C84068E0A6EC3FE8524C18B
-:10DD0000F7AF24F61CCF23BCDF62F23C4BDB68EBA1
-:10DD1000872F2A20FDB975D1793380E205E5872860
-:10DD20004F8AEE84BBB10DA03C11FF055221487211
-:10DD3000628610D0BE355E789ADA19D3F414C2FB2D
-:10DD4000655CB3DD41EBE929C4F7F0D72B137D0502
-:10DD5000FDF15FBF117C1AEED3B0D1E6D3502F1C7A
-:10DD6000D8E8E47EE34637B78736EADC6E3A91FCC2
-:10DD700043F21FAABC169F16A157E6A50AFD300361
-:10DD8000F50EC13503946000796FC623C0F2887226
-:10DD900010DCA410BDF03C397DF844FA5CEE88E854
-:10DDA00043AD563B2193A582E95E9867E2F7D1091E
-:10DDB000083E9FD57F3ED23FAABF8CFC1684C3EF9E
-:10DDC000F296B9B00D397CB35D88DF7A65E9D14B45
-:10DDD000C0FDB9F4BC5EB943BD84EB8F0FCF841F87
-:10DDE000A2BD188F8421BCE2CF5D04FF84160B1006
-:10DDF0007DD0B0B27C161AF2F9B5A25CC0FD4884A1
-:10DE0000BE1B8CEF59CBC3C44F07A0238DF05E64BB
-:10DE1000F3D9497E97B9043F7895DBDD0AAE3739EF
-:10DE2000C3E25109B4E1BEF1EB117F2D19B821CE47
-:10DE30006F69C91CA2E713B7BDF13EC9B7D7E608A1
-:10DE4000AB6C98CC9D1D11F67C003CE3247F927452
-:10DE5000DC7768475A3F4E0EB09EBB6A09925E6BF4
-:10DE60003D93EC09E33ED3AFDAD8BFACA717516EB0
-:10DE70000F27268F653D13420D43F26313E7986D1C
-:10DE8000F6AF233CA0653E7A0ADFFBED6500D2AF1A
-:10DE9000D3DB3F54C90F2D31E50EE840388F2AA35C
-:10DEA00053A87DF2E3E47C6ECF2477127E0E9BECC8
-:10DEB0003AEDFBCE46BD7404F2CBA98D503A02F97F
-:10DEC000E3AD8D366E4F6F74727B66A39BDBA33818
-:10DED0004EFCF33A8E137FBD81E3D46FC3716A4F5A
-:10DEE000E03AD47ADF7298487E67BCE5D0A82DBCB2
-:10DEF0002B89DBFA3B932C748EC3C95067EC4FFC23
-:10DF0000144E0C378007E52ED5FD53DB0D683FAD71
-:10DF1000FE02651CC0D454F75C6D3AAE3B7BE88FC3
-:10DF2000BEC2F119A9C37E6A43786F3BE3683889A2
-:10DF3000FDD2C7F59F3A883F4F24A292243C64B794
-:10DF4000795136C793D218C468F7C224ECA719FDDB
-:10DF5000ECB9A5C80A4B4A3AF2C005B0F3B1E17377
-:10DF60006D88DF2576FF3F51DF12689B533A9DFA9B
-:10DF7000107092BC2BE620CBFB10257D11DABFADD3
-:10DF80000EFFC4D4087FC0ABFC218DF4C344AF02A4
-:10DF9000AE74A67770A4D2F7DC98B7D55136311598
-:10DFA000F9F7D72E95F969C234C51B74F4975F63EE
-:10DFB000DE84F37A29D16FE2C559B5D42E98E3E215
-:10DFC000BE6FD94DB524FFA58E6BBD5FC2EF875CD8
-:10DFD00066D647C51ACE8B63178D79E391C9C8FF02
-:10DFE000EE694B0C3E4B7C7DD65F9384FD327756B9
-:10DFF000A12A753470DFB56B1B8D97BFDEC072E54B
-:10E0000049F2E859C48AEDA569383ED3A178C22403
-:10E010002AD33EA94DA371A7E221B4CDF48E3B557E
-:10E0200044E32354CF4CEA9FD54B9DD89ED1664EF6
-:10E03000BD84F366E7A4786CF8DE99F08FAE10FF2C
-:10E04000CECC49F224E81417049FAEA4BEC7EAA9B7
-:10E05000D6E91C8F9524D33ABAE23161BFFED6923D
-:10E06000FF457014FB52405168DCA5911FFBE4C7CB
-:10E070003F2975E2BCFAA10A90FC9C09E7FE91E0F9
-:10E080009FD99AA8272040F5166729BD576F519C44
-:10E090009BB8EF2BA1F9815166FD795CF7E49D7681
-:10E0A000B607E56FE5B35F74F2CEC16C17CADF9AAD
-:10E0B000564CED4993F0DBCBDF2A9FC3E326089350
-:10E0C0005229BFEB1FF8BD1D253F294DC7F54F0C49
-:10E0D00073B16E413A956A117A0DE78342EFDF55CD
-:10E0E000C1F35B94013F3A8FF3AFE4A7145A71FF79
-:10E0F00059E90951F3E70C7145F5E78D1858AA4520
-:10E10000D8B1F2FCACA8FEAD454AE98888F9BE69F1
-:10E110000951FD45A5AED21111F36F2B1F18D55F24
-:10E12000725B56547FA669B2D01F1BA1BC54C87D38
-:10E130007929FB9BD9AC870A9D62EE1B387E3F8E06
-:10E1400017B6097FAAD085FE14D2A5B4AD88FD808C
-:10E15000367C8FC68BEC528F05A0DD3D91EC80FCA8
-:10E1600009E22FF68B6577663BFA056389AE68B7DF
-:10E1700023E02F7544DBF1FA44E127CC017FAD0B9E
-:10E18000E939A7751EFB5765E9D54561207C46BF77
-:10E190001F0B372AD19D77131FB66AAC37E70C895E
-:10E1A000D9AFADD4C17E8CF4EFE6C8B78C7D21E049
-:10E1B0006D27FFC63887B1FFB5CE33479DC67EE1D8
-:10E1C000DF3AD7AC9C85A5A971E15FCFFE4C2C9CB2
-:10E1D00079A9324F81FE15FB85ADA9EC2FE24F7A6C
-:10E1E0003C3FC1F07FCA51CFB922F59C43495F58EB
-:10E1F000706D3D67AC7B2DFFCF58D7781FEA54DE9A
-:10E20000DF78BFF7B9AEC47FBE1BE727C5799EAEE6
-:10E21000C47FFE5CF4FC199A5EE340793E0E8A27C7
-:10E2200040783FA96BE49A959CF5D6525BF6A15FC6
-:10E2300023B770F6F9402DB5533B8327AD78FEB96F
-:10E2400039AA4EF907C32FEA1767A50A7FE4F855E4
-:10E25000DDAEE3787D40B753DC51FF886EA7F8AAA6
-:10E26000DE0B73288EF40E37ADA738C49B872DF6CE
-:10E27000EF4D15FA7E857CDF680FA9FE15047F85BA
-:10E28000ADE351F2492ABFE9B1105F1C277F2FBFD0
-:10E29000BFBF775C0B3A68BFE38F041DBE087D7E6D
-:10E2A000BDFEDE2262A60CE253C517A94F4A6C09D7
-:10E2B000BE48FD51E67445F5C793FF83EFCD760F59
-:10E2C0008C7A6FAE9E15350FFDD81CF2876A2C90A4
-:10E2D000A3913E35257AC8CF8BC5E3EFE5F93D0E16
-:10E2E00027B951604ED7557F1CFBE42911F88B7D6F
-:10E2F000BE3D55C47383C89EE33A2752756E6B5575
-:10E300009F70E6D07F267E88ED63ACBA8CD6C3952D
-:10E31000DDC4771EBBE90ABAE0F0D2E3F3E76A682E
-:10E32000FF3DE34DFF381CFBC71E5F21FA534DFB39
-:10E33000B2B1DFFAF87DA27FA369BCD983EC19B82A
-:10E340007F6E29F90BE9BE7F27FA759B1D5B15D4FB
-:10E35000039509A8D7B0D54C0A14A6F7C5C7DB2D7D
-:10E36000685F91C0C86C5E17D2C06E15F17465C24B
-:10E37000D020D913ADD8AB13DE2A130C7A77649270
-:10E380009D87DA0951719DDD82EFE1FB6536FF0B58
-:10E39000826FC2C93AEAA5870E960D20FE3891EA2F
-:10E3A000643CE4ED9BEA267D85F0ED21FBFEFF0158
-:10E3B000BEE678F0D59AC53E9DF57925648FF38643
-:10E3C0002179943EFA156A3A3F4F0821EFB0BFEE2B
-:10E3D0007553FEB1C665F190FF7E42F2EFF5B6359A
-:10E3E000328FA1DA051FA929A6F57BB17D5BF2CF9B
-:10E3F00019B92F6ABEA10B913FC0D933745181E87E
-:10E40000137FA86A610FF9E13DFF90E4A1F8F98359
-:10E4100044813F18D2F3D18FF1F97B77E779B6F1D8
-:10E420007381A765C1EC9A0EEC8FB3066FA0FCE375
-:10E43000A134FF4784873BADC191CC878EF549B4A9
-:10E440008FE2058E538CF80FE33CDD32BC7F5C70AD
-:10E45000EDFDC1467665E9648177637FC4B18DE8DF
-:10E46000F1DE24F1DC8007E1E8263E30E0EA8507B2
-:10E470008638398F0022FFD425E38B2E5A8FECA7E4
-:10E48000EA1079DC3F9838FF5245C28AFD7DE74D9E
-:10E490001C0F1A79E02210FB4D3EB54965E003F8E8
-:10E4A0003B51A2965E695CCBF1FD84762D26FEF68B
-:10E4B000B23D9D2ADFBFA9D55FE2A0F6FDE8795302
-:10E4C000651C3F09822AC559933B62C61BE77F46FC
-:10E4D000EB4FBD18FD3C294DDAC3413028324FB215
-:10E4E00041C64D974F66A7101F6B182BA8480F8B7E
-:10E4F000AEC2A4D43E3DD3B011E759499FDAB82D3E
-:10E5000038EBBC8FF669DC880C3F9AF4AA9B5B431E
-:10E51000EE0ACEC2BD3036621F2917061E2FBF2F4E
-:10E52000F038AE23E797D3B06F6E354350EFC3C3D7
-:10E5300014892F0CDF38FEBB7CD1C1F66B62DB6225
-:10E5400095E4D9EA36811E71BE043D11F4087D6C54
-:10E55000CF498DEAAB929EB509D17ECA78B94F9268
-:10E560006750D47A86BF62D0F350EAAC56F263C6E5
-:10E570003B56B1DF9232293B6AFDA293D1F82E04BB
-:10E580009F97E263CF87C071C0C4B35A947F32298A
-:10E59000BC83F963D287D1CFA79C8FEE97A6C9FC25
-:10E5A000562CDDAE854F18FBCB69E97F3F3E5DDE23
-:10E5B000687CA6CD89C667862F1A9F039645E36BB4
-:10E5C000A03F1A1F83578D891ABF617D61547FD880
-:10E5D0000FA744CDCF428319D91FBE755ED4FC91DD
-:10E5E0003B1645F5473F7567D4FCDCE08AA8F1BCD3
-:10E5F000DD6BFE2EFA17843644CD27349BBE87FE92
-:10E600003736FE4BD47EFF53F4AF8DA1FF56D2E7D1
-:10E6100013885EA8370BFBEC19B925A43F5D4D6F3D
-:10E620007C43799B40B1CEF9AAC03CF0D4E0D82F0E
-:10E63000549F427A6E30A2DA847AA3D604ABC81E05
-:10E640003C6A32711ED390F317D3843FF2629AC8AA
-:10E650007B19787B1AED22D94155EA4373FA8E244F
-:10E66000F253549309DAC9FE691ED61FE71C10BE87
-:10E6700019F7550701E7C54A92272D9888FCA8BECF
-:10E68000A972FCA90EF2838EF6A4E6E4CE53849F11
-:10E690002B0E9B4E7CABA6FA0364DFF09CA1E7A196
-:10E6A000BF9FF3DE465849F196D15FE65EBF99E61B
-:10E6B0002FBB7BE6488A7F7B9FDFADAC2C8DA043D0
-:10E6C000E43917C5F1AB0EA409FB67D813C37EDC90
-:10E6D00069D56B3AD03E8C53857D40BB71200DF1DE
-:10E6E000F181F28859F86901339D1FED2ADF27B8BF
-:10E6F000D021DF806D4A9FDDD2BF43E6FA203BDAAE
-:10E700006F7D9300A33844F7F03DE31D86FE5D95D1
-:10E71000CBF8BBEC889E7FF9FEE102AFF720F690C4
-:10E720000EE72CE23C06FC17A55EFE42EAE54ED25F
-:10E73000C711F9EB55BB7626917F7E2E47F8E3C6CD
-:10E74000F3DF493AFF2E4DE5F3AFDD9DB0FE7C04CB
-:10E75000DE2A42AEA87E55E3C0F591F9CDB5C639A3
-:10E76000FC8A46E75827E5A8A2B523F94E607FFE4C
-:10E77000C3345CB772D7957B0ED0FBA69E4C616705
-:10E7800003BCDFD2F780E382A57F8128BFB633CDFB
-:10E79000CC7075A689386109364EE4BB25E803B80C
-:10E7A000A87D63DA2CE23F7C1E56B0BFA015CCA436
-:10E7B000BF16FAB3CC84F433E079673F1EEDCF691E
-:10E7C0003AEF731BF8F87EFBDD7B2A92D80F34D624
-:10E7D00033D64181203FEF3D57C09C49799FE90ADC
-:10E7E000FB17B89F8D9EFBEE1EBC99ECB0B1DFBB52
-:10E7F000E0BFF40EF2C522F0F0BAC6FA40D73411E9
-:10E800007AF9034B2F1DED44BF0D6DA630E585361B
-:10E810009CB3F2BD4A7775CFCB0F239C1FAFF9662F
-:10E82000BF82707FB4BCE7BF0EE0F33B9E5241470E
-:10E83000BEF1D9FD5A7A44BC79EEFE2B2C6FE8AFBD
-:10E840003CFF2429A597AC1E92930FD6BC342A32E4
-:10E850005E484E9F99904EF73B93D2E2DE6FC4C65E
-:10E86000A56B883F597E75F64B0DBE5C2DF972C3C2
-:10E870000BA3F9F986A4DEF388FEF32AE7C1363448
-:10E880005B39AFF18EE487352F7E333132CF578F2E
-:10E890007CA95BA975724BF7A63AFA09FB4E5E1E7E
-:10E8A000CB71ABEACFA2731EBEFA6932F5F7BDF9A0
-:10E8B0002D9F076EBB3EF8BB11799178AE4AEA797D
-:10E8C00097F44AC501AB4EF9AC9203B927EEC27E6C
-:10E8D000652BEA1F3CCF2557C7B1A7291E3BA800CF
-:10E8E000E5B72AC309ACE42B1B9420E5C3D634EE6C
-:10E8F000DD3218FB6BEA161611BB56250B7D5659F7
-:10E90000AF0437B11F3E87E95C2865A3E450EEBF32
-:10E91000E5E378D771B1FE858DB0F63CC69D5DF517
-:10E920005F5E2038D6355A39CF7621296C198CFB99
-:10E930005EDAAB84027A9FDC76B9441CB62AF4987E
-:10E9400085F65DF5DCC211E436761D386D213DB9E2
-:10E95000AAE1B159F2799130FF41968BB5BB9595FB
-:10E960009179ACD5E80E42A4FD42F80213FBEA40CF
-:10E970004E49FA2C6B1A5E43E842BDB6FF6985F535
-:10E98000DA42E2970F0EEFF9DD6F68DF83FF3D9209
-:10E99000F15F747DF8075F80FD8B4AB90F5C3C63C3
-:10E9A000A1F8B2B2C17C21DEFD5263BAEF1EDACF0C
-:10E9B000888F63FDEE2D1610F73FD9107C9EEC82F8
-:10E9C000A3C7B21CE1F9579A80F068CE1ECB0AECBF
-:10E9D000DB48CEC85EB81DC17871F5BE748DF18478
-:10E9E000B1C4FA78F7A021395EA27758289F57E979
-:10E9F000EEB4105F57863F17F7FF8D9FCCF2C689A4
-:10EA0000B75F4E57A4333F274ADE37648C61B93075
-:10EA1000F7DAC3908DE5BE60450FD9A90D07913B8C
-:10EA200014A2B7BF87E00EEC4FD0E97C25073E9FCC
-:10EA3000D811B1CF1FA57CF4E6595EF964AC99F00A
-:10EA4000B9EF93B15A52DFF3AE4CC7AA78799997D0
-:10EA5000D385DDDE9CECBB182D07099E30EE5BD91B
-:10EA600064E77B1494832D2D45917270C7AA5DC411
-:10EA7000E74DAA0725022A1B17FAAB797E9287C8B1
-:10EA8000A336CE0C101FAA4E1FF327FC15F79B28A8
-:10EA9000EF8F50FFCD4DF73F4D72AC396065641E6E
-:10EAA000A4D2D4F1AB1685E8BAC36BA2FD0A81F5F6
-:10EAB00096EAF075703C5594A953DC7B74C22C2007
-:10EAC0003CFDBC59E1BCAF39D5BF358BE87B5CE57B
-:10EAD000F996A32F04E8BEBB6B1C14117CC6797F8A
-:10EAE0003E2E0C2AAEB3B9003CB4EDE6834BDDC438
-:10EAF000BF3FCF38C67E86DD1302D22B35E83F50AC
-:10EB0000DEC79E1F0AD33A0939BE2215F75993EE84
-:10EB100064BEB458FD1ECA273D20FB36CDB78AE03F
-:10EB2000B3A5278AF87BC8F5E5F9BA48FECD746F1E
-:10EB3000E9E77C4B9759F069D70DC07122D7FC4C9F
-:10EB4000A6212FE3CD063BB8AD6A54D646DAD744AA
-:10EB5000F0DBE879D7C1A51E82DF9C2DF93D33910A
-:10EB6000E52276FF8F889FA9CEC0B4626B16E1992B
-:10EB7000F0A6F79FF7A1E47B031FA0F973485E118D
-:10EB8000546FBCFC923FBDF82CD17573AA2FC7956A
-:10EB9000CFD7BCC2297627C6953B9CFF01C9B731A8
-:10EBA000BF95F089EF6FD1FC36C2EF51895FB3C5D5
-:10EBB000A73B59FE7D3AEDDF7BBE41F1CFF78D3C9F
-:10EBC000DF966CFFF79EEFCFF27CE654E4375A2FC6
-:10EBD00019789E39391820FEAB4D82A24DF8F8A85D
-:10EBE0006B969BE46ECB916F8692BCD72679DC4006
-:10EBF00079B1E69B9691DC6F197427F3FF172FE428
-:10EC000016AA11FB24A7177F45E73B2FCFB1C5E21A
-:10EC1000CFA1737C2CCF699C6B49BAEF2FE911F916
-:10EC20002618927E5DFCB3D7B8D794719E47DA61FF
-:10EC30008CF3388FD80D895C7FB657FAE11AF898B3
-:10EC40007FECE0D1D9BFF2C209AA2BA96931C13644
-:10EC50003A3E25B522EEFD925593110C7A6D18B20D
-:10EC6000D335348D3B9FD839AF16E13E080155F8B6
-:10EC700069D1F90CF02A5E25328FF1DA9AEBCB6379
-:10EC80003CE3AF21798DCD634C0E9B965B52AE2356
-:10EC90009FF1DABCB8F98CD119D171514186CEC03F
-:10ECA0008572047F86C28941913783F194BFEA2639
-:10ECB0005B85E39FE39959DE95AE1C9B0BEDE0135A
-:10ECC0004F6CDB3A0DE57084C003F56B88C9F5F134
-:10ECD000EC07F5E6475E1BC37E38EA3D95F3024E2E
-:10ECE000094B0C1D8BD07F1341A5272ABF123EF67E
-:10ECF0006D32F1DB9E54FD2DA24F4F9BCA75280942
-:10ED00005A87C51547EE0E907F8076E09F33843E8C
-:10ED1000B7358A7B4B9BEE653D99E0748E5323E4B7
-:10ED2000242F43D8A58A631F0CB5A02C5D329D4CBF
-:10ED3000CEC7F5D7EDAF4FA634DEDA736F4FA4D24E
-:10ED40009F3B35FF820C3CFF17CAAE5136F25BB7D2
-:10ED500006C7127E42E16CAECF2CD020A015F687FC
-:10ED6000A7EA293C14BA04954FA5715BD0347E25DF
-:10ED7000F15F55589C97F630A38ACC6D54B8DFD517
-:10ED800058934AEB55FDB67910E9AF9732849FF35B
-:10ED9000E2D53CF1BE061ACDBF3FC325992A68A231
-:10EDA0007CE34B324FD97555E579C6FE058D335559
-:10EDB00027F2417E78C711CE8B365975A26FC27388
-:10EDC00020F0D194C07E68D5E1D94076AFDB051E36
-:10EDD00005C7F724F67C44FCD0D36CD5E93E37C197
-:10EDE000B9035271FD3DB21E2C1719B6DED1F7DC06
-:10EDF000D82FA1E997944324BEE07BE5046D074C2E
-:10EE00007744E23B49D859C9577B12C326BA67E910
-:10EE100041DFEF5986AB0F4EE07D0D3873D90EEC14
-:10EE2000B1F45CF8713AC3E5243EC8050127348D7E
-:10EE3000D649AF2638BD7C8E04A7EE0928FDE1AA8D
-:10EE40001A8B8E20CACFA3A4CCA6F4C97755625FD3
-:10EE5000DF86B2B0271BA4FCB76E2B9D16D9478561
-:10EE600033A9EFFDFF78E2F8B6DA219CFF0BA84842
-:10EE70007F3BB649A9744E21572812DE8C42810788
-:10EE8000AA0BB4DBC478EF7CE473472ADB7F9EE7F0
-:10EE9000B13AEDF3B2585EF87ED1F00F1F52C217AF
-:10EEA0006E46D2763EE64BC9C773759A8E3C5C8738
-:10EEB000F3FEB83C342A8CFD16ABFF79E2CF573F06
-:10EEC0005CB1BD80F4EF1EB3A79CF44F47E071F630
-:10EED000CB5F34EBDB22E40E86F46472DD61CC3E62
-:10EEE00055E7363D4EFE76F74145A7FBF46E73CFEE
-:10EEF0005082BBB2E9330BD563561DFC84FDEBB2E7
-:10EF00004CFF5EDA6F526335D7CF4D861D5C3F876D
-:10EF10007A91EB20436EA14F2E9F1DF56C75041D59
-:10EF2000DE93F2063DFE6164BF9AA4BC1EA6381CA7
-:10EF3000DBFD2D770CA7F5F7CBFC80F15E351C19B6
-:10EF40004C78DF04AF716B3CEF0E6A5CBF9CF7AE90
-:10EF5000ED5E6FC4FCD352FE4FCBFD5667FADF2047
-:10EF600078D7B67C6AA1D2C2AAF3A1A114F78634DD
-:10EF70003DC519478FF4CA6F8C3C55693D169A5FA1
-:10EF8000751158AF20BD6B53907E2FBDDB386639AD
-:10EF90003EDF8F3449213B8BF12AD9E3FD66DF60E8
-:10EFA0009A5FFDCED763498F1D2420F07F5F37AF76
-:10EFB0001D467843FE2F4E2439DB0BACD70C39CDE0
-:10EFC0002739C5F7F389FF8BA89FCB7A798FA57D69
-:10EFD0001ECBE57E13905C22FFB33C20FF3BC9DFD4
-:10EFE000CB77A23CF0FBA359CEF7B49BBCEC37A384
-:10EFF0005E1FC9FDE2C5D4DFD35EEA6439A73A8457
-:10F000004292D7F0115E270440D7F2450AF822FD5C
-:10F01000FFBC8C64712F24F1393943D883508E9E04
-:10F02000E2C173D855354A3E22ECA5E84B7B5A9A8B
-:10F03000F9976DBF98465226ED8453DA49FF78D68A
-:10F04000FBFF286DD586D7A72CA8C3736E38A5F211
-:10F05000F86119F785259F1C91F91AB21B7A9AA8B5
-:10F060001FA6E713B04FF5E513BDEB4BC81C4D9A37
-:10F07000B3E328B5537CA11272DBA62D6B3F6A1651
-:10F08000629E47FCD770646E1ED5E3759FB3420243
-:10F0900082D8F06DCF472F221E1E3E8CF88F63A7BB
-:10F0A000F038CC7FE87F0D0677FFF16E45EA91409E
-:10F0B000D27CE2C7AE06B5AF8F8054226353DFFD2A
-:10F0C000A47D7B006DE77F677A0767223ECF0CF057
-:10F0D00073DB7DFADB4C12CBFD67455CDF60F1E64C
-:10F0E00011FF346463A81B874FAD9922EF536485E9
-:10F0F000B8F79C37670A39181580ED0AC7EBAA33B1
-:10F100008874BFD4A07A2DE82F5D84C092A9A46F23
-:10F11000645EF701903F5EFC45FA3C28BB0F90DF30
-:10F120008276EBC15FC4D61178D96F31F25800EB0B
-:10F130004DC45F2B9B14F80FC4C5AA67A2E7AF9319
-:10F1400075F2AB1B771D1B8C745DF35CCC38F92D0D
-:10F150007CFF11E278785D5D743DC3CD99D27F1953
-:10F160000EC3C97F41BE623D61D6A0D58A7CAC602A
-:10F17000144322F69249E00BF52BCB67BE616F8AF0
-:10F18000855EEAB9045CA794BB3B7494EA81A6D47B
-:10F190006579688F299A189FD29825EEA7B4A04A5E
-:10F1A000750C93BCFE59EC7707BC67A9DE6495D457
-:10F1B00097E0C45FCAFBC8D3AF92FEDDEA606C9DE6
-:10F1C000A8C053959C37198235B4EFCADDA2DE6919
-:10F1D000EDEEE8F955124FEB9E3A7D8CD28515A1E4
-:10F1E000987189A7AAC6983A16B138DC9F29EFAD65
-:10F1F000647DFBF5D65BFCD12CFC8DB7E53AC6F8F7
-:10F20000E64C91EFADC463107DD705D520F1D12A2E
-:10F2100025902CFC5E702CC7F3DD67B081ACCFBDB0
-:10F220005FE2E93EC93F7C7E7CBFE219F17DC5FD0E
-:10F230003F8B867F0DF82C83F1F9830D3FB050DEB4
-:10F240003196DF56D599D9FF5D23F113CB5F6B7AE9
-:10F25000F9678785EC5B2C7F55FA956BC02FFCF620
-:10F26000FF5BF80D3AAF91CBAC3587393FB5F60966
-:10F27000C543F9AB6B9DABF73CF27C7FEFB99E3594
-:10F28000E83D06C630BDE7A45D17BD63FDEDBD9644
-:10F29000DEBC26E7052FB766733EDDE0ABD87566AA
-:10F2A00049BF7DF653C27FBDD4586227FFA3FBA49C
-:10F2B000C9A3E89CAF4C2EC0F38F6F5681FC91EE32
-:10F2C000A6E13B03087FE1A9A2C5945F1F7F0AED79
-:10F2D00013DD07B716FD5702DF077BD248EE67B68E
-:10F2E0008D48FBBD83D761FBDE7DB2706739E9E9EC
-:10F2F00093A545B4AE82E3549F5E28ED54F5C94210
-:10F300007B4784BDFA4DA6C8CF6F71FFFE518A1BA3
-:10F3100066EF357B283F32DBECDF9480F015BEA032
-:10F3200078AA71B763ED479EA47551BE28CD8AF3C4
-:10F33000FEE9088D57ED5118FEEEA6B2BC3D643FC4
-:10F3400083AA87EC6277D37DF90F921FD4FC40FE2D
-:10F350007D11FB1D4B15FA66F60D66B6D79D83EC45
-:10F36000BF2EA7BCA87717EB8DCE43FB2CFC7DC32B
-:10F370001E05DC78CE63EEA32F131E3A0F9CB65009
-:10F380001050D270DAD211477F1BED250CF3C29CCE
-:10F39000AFDD61E1FACDFD7FB0D0792B9FFB84F327
-:10F3A0006F6B287E203FEF1995BF773ADAFCAA856C
-:10F3B000F8B4B24E81015991E3661E27FD4AFDCF94
-:10F3C000EA849E36F87F85E47783FF0D795821F52E
-:10F3D000DA7D5BE3F3BBA1FF1E04EF9641B8DE03C9
-:10F3E00075CBB90EE9811DD1F35752FC7A23CD17A5
-:10F3F000FCBEF2A9E8F1D5BD7C1E60FD1FAB47BF86
-:10F4000033F47F2EE4129F5F0EAF18A6A13C7D7DE2
-:10F410007ACD308893AF3C29FD06C36E5F0E9BD832
-:10F42000EEC5CEEB6ABC62217B5BD5FA27F673672B
-:10F43000357DC9F4286F6AE17AD95BC0BF8EF07957
-:10F440004B93DD49FE767987D003F39AACC1A04295
-:10F45000E3A15AA273F761F1BD49E090C2FE1648DC
-:10F46000BDB852E275A5C4E34A8CE306537D8C8C8B
-:10F47000E32B65BCBE3A67D7312A29A994E3EBDABE
-:10F480008E26131EE781D05BF342426F19F431ECF4
-:10F4900050ACBE400B770FD1776D9395EBD6E74B11
-:10F4A000BD35BF0EF596D25F7F740FB48BFCF17E35
-:10F4B0000177ACDDAD6C889EEF1A20FCD8CBD27FF3
-:10F4C0002E1C104D97F21EB0537E7F9EAE7A82FCAA
-:10F4D00056BB46FBB78E457EC3F55BF5E129F1EAE5
-:10F4E000B58CF64D191718FD059467C3F921E70E81
-:10F4F0004764DCFF9F03847FB366B21A20BA46C418
-:10F50000490B0AB3E2C6497309F43786DCF7B371D5
-:10F5100091719277D728E2B77F75EF2CA7BAA6AA88
-:10F520003AA12FBA26E1BA29E4F703FBD15575D6E3
-:10F5300020C53355C82FFC7D1AF109C96393524683
-:10F540007C8271C6EDB4FE42BAEAC4F32F6C44FB70
-:10F550008ECB2F2CFD92F9AB6D843837E26D40BC19
-:10F56000B8C388372AAF0ABFD6785EA97570DC5158
-:10F57000D924EAB51B8E7C33340BE1ED6EFEF3D05B
-:10F58000E5544F3E40D8E786E2D0A75457F4F51E25
-:10F590005B5CFFB557FF2BB52C0F95E68E4CF66BD9
-:10F5A0000EA21F7913EAD1B7BFE038A5E148C2BD6A
-:10F5B00094CFEB5AE11FE6FC1E3A55C326F683377B
-:10F5C000412DB7E41F45FA8D2B9DA24EE941693FBD
-:10F5D000A9FF08F2F583387746617FF937F449854A
-:10F5E000E4EBD510D83255E9AF072AA4DCACCDDF67
-:10F5F000B585AEF663FDA70A294F1831B0BD8CF56D
-:10F600009FFE33865FABDF4E64FFB8BB4D7552AED5
-:10F6100019F1FBAB41E427625C901D275FFB85E499
-:10F62000CF4E797F5C3D4965FC99268BD6F0B710AB
-:10F630008FCC37DDA71D41B26F79875FCD263E584D
-:10F64000BB3BFADE89E8E8E7BAB1A0C84785EC7CA5
-:10F6500017658CBF74F8D531C46FD56F7F3B4AD026
-:10F66000E79B5196F46BC367B48A22E2669322E269
-:10F67000E6FD5A4732C56B5507555F643DBF41EF04
-:10F6800097A53C8126F203F50374E6ABEA26C11F79
-:10F69000A666D1E2FE4B447EC8CCFBF71B2F46BECC
-:10F6A000F91E7B060417F24095B987F9AFEAB489D1
-:10F6B000E1A93A7D397344C47B015A7700E9BFEA76
-:10F6C00075C0FAC40EA46FE7D3F791D89FFF7E02EE
-:10F6D000FB61C7B2B7978BFB2F15487F3DFCF69AAD
-:10F6E000D191F660E200712F0E840737793FBF1089
-:10F6F000FB4B3C6C824532BF20F879AF8C9B302E9F
-:10F700007B73409CB8EC7AFDE9EA662B50FEB9EABF
-:10F71000032BD7197DDDBC92E37EB8EA1F4DFA06B4
-:10F72000FCFE1BA97DF8F0CAD1F4FCEBC3AB6FE47F
-:10F730007CA9B2292ACF1120F8DCE45F7DF5EE5DCB
-:10F74000E47FB669EC9F14B69D7D97EE69F7359816
-:10F75000F9DBD18AFD13760692C8AF2A9C4FDF11E0
-:10F76000ED6BD598FFD0DF32FC2B3BFB57A78AD837
-:10F77000BFC2757C416E8B4E94D3BAA78A8B689AB0
-:10F7800082E3A4D7C6937FE5E8F3B70C783E93F8FD
-:10F79000EC6E49E0BC8B02D982CF604414DCEB1ADA
-:10F7A0005E67FF645DA31AF5FD88F1DE5F06887B66
-:10F7B00087EF0C3E0B295EE6A3BDA25DD7B82F9361
-:10F7C000CEB1D61C623EA9AE338BF13DA205BA077D
-:10F7D0009AC01F4107083F27E811D2659E2538844B
-:10F7E000FCFABDBDF78AB22E2428EAF56A5A87F3DF
-:10F7F000774C975BF7A5C7B34327E99E071DBEE388
-:10F8000059221E8A1DFFAD5BE4418E9F13FAF1F869
-:10F810004CFFE8787A3200C5225FA048FA3588EFBD
-:10F82000ED63E735D37A78FEDD4302C7898F3BF776
-:10F8300026F0FD63A74BE4754BEADB34FA1E666DD8
-:10F84000833281ECD2DA9CF7F87B19EC17919E5C3D
-:10F850001B3EC8F7AF15757B6779E3C0B1DD2DECB2
-:10F86000C33CF99D72ECF87C397E063C19329EDB74
-:10F870004EF73E67CACD4EF1DD9BF8EEF556A9D79F
-:10F8800017DF62663FEA0CE866717F22EE391648A0
-:10F89000BD7DABD4F7B1DF631BFAFD76B9CEC2678D
-:10F8A0006033DD73C47E9F7DBBF40F178197D7EF64
-:10F8B000F75DBDF41363FFFE42895BEAF551308AC0
-:10F8C000F47A08ED0DD75BE426B0DD9E5F3032AEF2
-:10F8D000DF41DFA9EBF23B756A0DFA57E7BEC7F6C9
-:10F8E000F078CBB997F9FB867309901DE79EADCFF1
-:10F8F0001E1A7AE436417779EF51E114301AF4BFD9
-:10F9000084115A647ECDA0FF83920EFFC7754539DE
-:10F91000A045E6630EA9FE07DD195447DDC9FE3890
-:10F920009E80ED219E6BA83CD7506B849DBB3470AC
-:10F93000795C3EEE3B5F6A40D893746E5B72ADECCF
-:10F9400037568414FEEEB0220CA27F9BC2F9CA5136
-:10F950000D2D5CBFB1A454F178855A3C4BF0197C55
-:10F96000B4C026FC03835F7AF125F988C6C95FB865
-:10F9700055FA0BB1FC341ADA67D1FA4BBD8A87EA23
-:10F9800036AFC947CBC6BD4EE1EEB5F808F9D24C4B
-:10F990007A31969F5E73FB1F25FC75B75F5E5280C0
-:10F9A000EB1FCFFD6C28F14FE535E4E84549BFDD9D
-:10F9B0008EC071AE63A9977504F5B98D1D849756F5
-:10F9C00060BFB2D3D5BE6583F0B7B98EA0229CC00C
-:10F9D000F5A5154D76FE6EADA2A13A710CE9E326B0
-:10F9E000D563C77E79C3E952CA239417893A972A07
-:10F9F000BBA8BBABB28BBABBB9E9FEE7DC13F8EF2F
-:10FA00000344D711583A7EB5E17BF83E56DF359373
-:10FA10000F37E17F4E0F354BFC6C68BB923986C4C3
-:10FA200034DD7F88E0EE7EFD450B7D8A5135E6D5DD
-:10FA3000595482D6ECD679DE2D752DB5945636E024
-:10FA4000B7BB9D42EF9A8343D86FCDBFBE7A9BEA86
-:10FA5000836F8C25FBD5D5D236D612C1EF9D1B50B6
-:10FA60006FC7A1633598A41C6BDC2ACA22E9470939
-:10FA7000B9AE6A3E9A49F98B4E92E77C6ADF491E1D
-:10FA8000816DC5DE33C923C99FD92F5A63BD4B4D44
-:10FA90002ACF03AD63D4ED4991F06D66F82E85C48D
-:10FAA0003A001DA31617448ED7FCBFD60717853E14
-:10FAB000E888D207069E4216E0EF880387AD5CA770
-:10FAC00040F73FAE083A6A0305FD6EC2608AE476ED
-:10FAD00032DD7B0F27974F83BBA9AF41584BA5FB66
-:10FAE000E9B02AEAFB86B0BE9F28F7BF490BB750A2
-:10FAF0003DF064795F3A05DA79DE0CE8E1D60B4E29
-:10FB0000FE0EBA183CDC4EB285E7535A2B3F14E286
-:10FB1000EF7BC2999AEB824D7E6F1D87DE7D78D395
-:10FB2000E082810F95EED5443D53EC796E1828FCA8
-:10FB3000BC9BBC420F914B41F5C09320C4F7F9D355
-:10FB4000A143DEEBC73FC7548C0BE91E6F3ABA31B5
-:10FB5000898C8F20CF9F46E751E39DA7633E931981
-:10FB60004A9D049F12CE347D67BFFE7374533528BF
-:10FB7000E5BDEFEBE9FA7151DF3DA8A7E98DF7A9E3
-:10FB80007E59F17AB9BED943DF8D53FC13D63A7B47
-:10FB9000F55936C098812B72064EE8FB6E04FCC006
-:10FBA0007524B1DF8D447C27021723FE2E9251E786
-:10FBB000BB3BB848A73A9165E936FE7B3B85B6A1C9
-:10FBC000E329AF7928CD9F333083EA7DEB46F2629B
-:10FBD0005A7002FBB992BFECE09D447850BCC6F766
-:10FBE0002BC07CD3FBF70B3281BF27B25BC5773EBE
-:10FBF000DB911F6DA92C053AD55FC323253AF9D3B4
-:10FC00005B5C360F7D476C25B8ED7D70D7D8441D01
-:10FC1000488D4DD47918F572B178ADB119794E8F00
-:10FC20008DFDF198EF907E62F3DF42787A28A998F3
-:10FC3000FF0E53DE2BD3DC5C0F25BF7FAA4930F0CB
-:10FC4000506CE3E77DF594EC67D6523D37C259938B
-:10FC5000015CFF783469540AD565D5B4897AEE9A87
-:10FC60008C00EB77B35F617D5FD35AD24AF6E2B284
-:10FC7000C3C275DD352E51071FC880D0F37A343DDD
-:10FC8000A619F4A0FB4B598F64D0655C3A94D07BE5
-:10FC9000E3C2DE91849342DBCB37D0FDC2B87074EF
-:10FCA0007D19D26935D1A9F73B1ECDC9F51E067D58
-:10FCB000907198D99D92EE06BD9CC6DF23F06A51E3
-:10FCC0007F8FC0A0E3F644412F3355E00CE77775F2
-:10FCD0005A37964EFF1BE114C1BAB04B000000002A
-:10FCE00000000000000000001F8B08000000000062
-:10FCF00000FFCB936560F8518FC0F9D20C0CDEBCCD
-:10FD0000A862B4C40C5C0C0C41405C0EC41A407B6D
-:10FD10006F01E9DB401CCECDC01001C4FB81F81F90
-:10FD200010FF07620D20D604E25F407945A81B5BF7
-:10FD3000981818DA80B80388BB805887918141975A
-:10FD40009178FB93841918DE8923F87A120C0CCD74
-:10FD500052F4F3FF60C33156F4B5EF29D03E4E178D
-:10FD6000043FC71998245C50D570BBE03783074D1A
-:10FD70009E178DCF87477F9E212ABF5C0B953F4DF5
-:10FD80008781E123929A0A2DFC6E41C78A460C0CAA
-:10FD90004A46C4ABDF608CCA0F3081D000F9ADB1E8
-:10FDA00009A803000000000000000000000000009F
-:10FDB0001F8B08000000000000FFE57D097C54D582
-:10FDC000F5F07DF3969949662693900D0871028AA5
-:10FDD000A88013086940B4C322A2228E5BC50D26F9
-:10FDE00002D93710FDF0AFFD3210362DD6D0824645
-:10FDF0008B74C0A0C182040D1824E0002EF82FD50A
-:10FE0000D8BF7B5B0C4AC31692801B7EB5E57FCEC4
-:10FE1000B9F725EF4D26806DBF5FFBFDBF69F1E6A9
-:10FE2000BC7BDF5DCE76CF3DF7DCFB14DB2896F89C
-:10FE300063C6CEE00FD2AB2C8CB151DDE96CDBA0F8
-:10FE4000A187FA74E7FF5965D3EA87421EABD06EEB
-:10FE50001ED6FD9CB185547E408C6B38BB1CD3F400
-:10FE6000101B0E8F6DC91696CCD87D6E46BF01094A
-:10FE7000BE742991B1CE1556F7BA0C78AE7A5C08EB
-:10FE8000DFF7C8207750C2F73CC95216E43FA2BA48
-:10FE9000D701CCBE3F23B36CC666DAE06F0FFCC35C
-:10FEA0007AA0BE7CAC6C1063EA699905A07FEA7702
-:10FEB00012A5033436C3EF0078F92D6CDCD0EEFECA
-:10FEC000B913FDEC7380B7E8F9897E5BC0907F09B8
-:10FED00093A8FFECFB4AAA5F6F6FF1F25B6C3E07E1
-:10FEE0003616948DCF3B967FE9C2E78B9B6EA17A45
-:10FEF00018532CD8CF72B7C84FFC5C6396EEFABB90
-:10FF0000F114A27674D8D304EDFE8831E9B5BFB6FA
-:10FF100032C043D556D56305BC4CD8AA867F0C7039
-:10FF2000E95A2984B065979D31C04BFB6A0E879DC5
-:10FF30009A0FCB9FA80518AA28B736FFFC0AC4DB86
-:10FF40005699ADA366FC84F7561BC73B6BE4709EC5
-:10FF50009D83A56B774FC7F70B1AADCC0EF5956E49
-:10FF6000CF9F7A05C0F9FB5486454AD72FD0FA01B6
-:10FF70005C1892EA11EE18CFA8FDE03639B41ECA1B
-:10FF800077B89A936F83F11FABB431CFC5D06F6749
-:10FF900073F2AD8087A2D09649F85ED146C98B2C0A
-:10FFA0003461EBFA37FBC27BA51B24AF15F0525C22
-:10FFB00017CB3C43781FCEC0BFD60639FC63C89F21
-:10FFC0000BE3641948D7EA494CC6F657681E6737F1
-:10FFD0009E8E550E611E6B375CBA01DA81F7CA5EE0
-:10FFE00094BC38C4320B0B205FB66FB74F7BD68101
-:10FFF000E35BA00D76E2B8966A582E3F94BBCDEE37
-:020000022000DC
-:10000000C1FEADD526417ED1EAB55A9E81FEC575A9
-:1000100097318FCDD0AF9A412946FE884C8F019BF6
-:1000200018FB53C498AF1EF94409693719E4A29F1D
-:10003000144FF42EAE934DF50326194B82FF7E002C
-:100040007F02BE823B9D84579D6E73051FE9743B02
-:1000500025E487299DD9C6FAF5F4E74807E84F75E6
-:10006000A59BD25F54A652BAB2D243F47902F107EB
-:10007000E972D16FD758364E81765D3EE646314BF8
-:1000800098E21BA7029CE0E770F2DD01C97396F1CC
-:10009000EBE9136A20176572159BE453FA02AC056D
-:1000A000E6302FB4AFDCE89B389AB1D759E0711C29
-:1000B000FF222950807465AC3ED50F745922811EF1
-:1000C000017C2DC541021E96F4057E063A3D714F16
-:1000D000F6B3B224C69A8870DE738F66503D3554ED
-:1000E0008F0AF50C3A773DC9D3734CF5244F2FD0C6
-:1000F000EB594BF5D8CFAF9E27A68F31F7677A9192
-:100100005ECF0B586E91F3FCC6953C63ACB93F33A0
-:100110004AA89E94BBBD2C00E5659D7F58B34F86D1
-:100120007CC7C6F8118F32231F8DDF86F53941AAAF
-:100130008C7C1497136392A7785F8209EE33B99F82
-:10014000A97C927FA0293F65DAA5117CE970B75E92
-:100150002660E854385EA3FE6AFD34D23BE3FAD948
-:10016000087EA09F83F4CE03630217BBA1DFD8579C
-:1001700006F47F400B5CEE8EC237302E89A562EA12
-:10018000B1601A99BF54E5781BDFFFFBC107E1FDA1
-:10019000724BE7E07880FF4B1AF7218EFB8FA84C5B
-:1001A000816E3132ABC072315646FA6F6946F6B392
-:1001B00041035E970D007E91BAEB5DA60652911F3A
-:1001C0005B821541E4CF253041B07E8C1D6415E182
-:1001D000E085F0FE80BC54C4BF5503FD616C5F83B5
-:1001E000F68752FBADD87E5B2FED5B07E698DAB75A
-:1001F000A51798DAB769D03EC8476770BE681FF088
-:100200003786B1936C3EB56F4D2FA0F6976AACC0A0
-:10021000D47E4C57FBDF60BBDF63FB4951C63F70A8
-:100220008C79FCE945E6F16B7CFC6C4150B41F43D2
-:10023000E397A4201F7F7A111FBF95D7DBD5BEABF4
-:100240000BFF9A04ED3AA45EC63F68AC79FC1794A4
-:1002500098C76FE5EDBB172C13ED3BA8FD78691926
-:100260001FFF0525D4BE660D78918FB4FE31152190
-:100270009C4FD34080524807FA281D92C018E8933B
-:10028000DFB2818487076238DF7D1303FCE6E8D69E
-:10029000A72C041208F37099E0E9E28DE3343E3FA5
-:1002A00007695E9F2DBA3AAB51A6F98CADB4862E84
-:1002B00082FEB637CA418467ADBC3224D37C0A764D
-:1002C00002BEA7B0303EFFF3AA61EB8CE38A4C6715
-:1002D00057ABAD2D06B9EAD2EFE3D9900AE85F0536
-:1002E00032C1A86EB815F434033DFC39E8634C0FF5
-:1002F000ABDC2E39047A9C5D6C949B05DC2E09B234
-:10030000F78740FF7F22FADFAA707CB7CE9342883E
-:10031000FF6F56CCD1509FCDAE8E05A477F7A35C6E
-:10032000D0A973BB3544F6144C07889FDB491419D8
-:10033000FBD3AE1BDE945C303FD6F431BD77370B78
-:100340002D4E85F23397E70E70C3F8EF9A661D21A4
-:10035000E3FCC47CFD2D24C7ACBF2587B1690D2B00
-:10036000D4FE00DC3E4DFDBCC5F0FE1D01337C57C4
-:1003700081196E5743AA05ED994289AD857AEFA997
-:1003800030E7EBED4C9612385D457B3F011CF48560
-:1003900047F7603A021FBB89AED3DDFC5DBD3FE588
-:1003A0000FA92C4CF3714B1223FA2751B9809B8F64
-:1003B0003BB2BFD3559BCF0FFD99FEA04CF88CEC00
-:1003C0007FCBAE589F05ECD9969A2F5564C1C8F1E2
-:1003D00044F67FC6FCC8F1B8359C1F728391CF39B3
-:1003E0009F44F25379E3B85F1E32F05369FDB5BF05
-:1003F0003C6478AFB8EE26135C18BAC3543EBF26EF
-:10040000D7943FBBBAD0943F73D91C139C1B7CD0AC
-:10041000547EC6FC05A6FC7B2A1E31E5DF55B0C222
-:1004200004DF1178CA54FEF6696B4DF9965D97DCCE
-:10043000887254F581CC70DEF8DAD1FA73B437BF24
-:1004400076285EA4C711B057500E8E81BD82697B9D
-:10045000E348B2AB410FE63130A1564BFB83CBC62C
-:10046000A25E66A43F43D2EF83C134C69E973C840C
-:100470003FB94663616061892574F171A76CC86FEB
-:1004800039477E0D08FAC89EF9724BF4E7E5EB7226
-:100490002F40BDD39B3E805F7F9CE73A843D1099FF
-:1004A0005F2231BFF1B9BE7EBA5CE27ABE44AC5382
-:1004B0004A5EEA3B9EB9100E0FAE385B7BF5805466
-:1004C000D49368FD27213F801418E8515C37C82475
-:1004D000DF6DBB65EA5719EA04D0AB99CCBF574230
-:1004E0003D13DE9B7ECB30EC87EF75D4FBAC3189BE
-:1004F000E6F5B6CAC9BF3CA4227DFC941EA99C4661
-:10050000696B6580D2439505947E5E5941694BE5E0
-:100510007C4A0F540629FD63E5324A3FADACA6F490
-:10052000E3CA1A4A3FAC0C51DA5EE9A35497872E0E
-:10053000FDEB17F6B058B7C0036E0F8BB12C82B22B
-:10054000CD24E7DE5494F3538E6F06A3BD7FEA6398
-:1005500060A28CDEF115C96FBDD3D147F64A5E08A3
-:1005600098A74FCF7C7B0CA793DDC22633D0478F53
-:100570005CF49CF7DEA1042BC832C0A9DE9B9C5121
-:10058000EA85B90FE9752E3A315FE7705C67B73ECF
-:10059000FD976CACF77269209F87F7CA340FB3F0F0
-:1005A000B35EA4D70FC59BF4DA9FD25BA0DC892E83
-:1005B000FC35A73348E7486EAAFF5483952988C7BE
-:1005C000A6D8102E8D4FED7BD685F2383755AE3E2E
-:1005D00034B2777C95D667543B0CE3296F34C3A7BC
-:1005E000AAA5C9DC7FE089BB7518F295BBFAD04596
-:1005F00048FF544AF57AE6A66AD4CEB1BA41717C76
-:10060000FE0EF17970633CF12BAC3BA9FC3FBB3F84
-:10061000BDD5A3F787B106F6850DF501E40D3AF7D0
-:10062000FAA807DD95AF343FD2AB49FD06ED85183A
-:10063000F8776620D6AB10ACD75B5E2F07AD97E39B
-:10064000F38DA6F6E03D8FBEA6C7F77AE75B85B5CA
-:10065000EAE3047D75A5F0E714D7D9ABCDF34ABC26
-:10066000092E6FEC5B6D9A67F00F907F562129C8B9
-:100670003F25829B3A14C73209FA976AF150BDE5CB
-:10068000122F576A6BD1021E62C766B433EECDD10A
-:10069000F9CF73FB1F40DF1FFDADCA1EC57CE1D73C
-:1006A00051F56CB06F2DE8E711D0BD0DC55350EF7B
-:1006B0001DDD763DD927B398DF858BA402569D8D2D
-:1006C00076CE0966998CFC7F82FDDE35D2B0DEC81D
-:1006D000B768D49F99CBCCF32CD8672638BFC60C0B
-:1006E000E7B19B9391DFF356AA30B7A05C9AF36F02
-:1006F000B7B849BEF259C5125AEF083FD8BD6EA629
-:10070000F407B92F7DE599ECDCA1E887E0FA5BF707
-:100710000F1426703BA52831A4F920FF8B86913F4A
-:10072000B982E1FBA125A8A7824EE65DCF7AD2EF80
-:1007300087F63FB2BFFA7CD2C34F21FA21D749BE18
-:10074000509475DAC31649D85B414A978B71EB76A2
-:100750006B4D045C1B01D747C07F37BF253213BFE9
-:10076000A55A02359624CE5F682F484AA716F84747
-:10077000EA4FED517FED3FB5FE34A83FDB547FFDDE
-:100780003FB5FE0B7BF4BF295AFDA5AF6CDA16040A
-:100790007D53B479958BC13C7454A94EF602DD4B60
-:1007A000D62F76211F1C51822EE4E7A321797234C3
-:1007B0007EF8D222FCA2CCE790705D857F42FDC717
-:1007C0005EF8D954B4E7BE59AFBA69BD54670D5B42
-:1007D000414ECB1A0AA7A0DF17E0831C5E7A52466F
-:1007E000B8D1CC9F45CFAF4A46FF1E708A584F8480
-:1007F000C95E2AABFDF3249C87CA5927C959E47BFB
-:10080000D8FEE904D28FB95A5CCF7CE827D9F9E544
-:10081000022FE50D3F3B29BB30BDF630EA13B04C4B
-:10082000C80E8F7CAF40D841872CCEC4565842B1F9
-:100830001FB11FA1DED4F1C242DC0EAADAF0E4F04F
-:1008400083D0AFB6DADFBA2403BE74793B553FF3E9
-:10085000D7AF7A7AD7CBED62BDD7FD5E88DEF334B1
-:100860000AFBAD89A7256AD885F671C95AD51B84BC
-:10087000C7259B9E7DEE695CAF7E62F55E04F51731
-:100880006F7AE3C33100176F5113A7F06138A4E406
-:100890006EFA94C3BFF923BAE951F4F21B9A6718B0
-:1008A0007FFE7042375D8AB7ECD6D8B09EF898507C
-:1008B000BF5B6B7144A14FFDC1496867556DF85628
-:1008C000C375E5D15D124BC98882CFB56F90BD80ED
-:1008D00078227A0A7A75D12FA27C39D005F57A244C
-:1008E000BD22CBBD81FA6514AF17FD93C0DF2FBECB
-:1008F0008A7EEC4FAD5EC443C18BF7B9703C8795DF
-:100900000ACEE7CF2C4E463F7D811A4C7653CA9FC4
-:1009100017ACB99FF82FFFBDFB93F9FAD0D7D74298
-:100920007355B02F8E73F6EADB689C792C407C58A7
-:10093000F08CEC0F41FAB5C2266F892227C5329799
-:1009400093C3EB80B830CEC3B84E41BFEEEFE5D0D5
-:100950007AF28FCC61A80FEED7FDF16C2EC15F8BC0
-:10096000FD8471B2455FE7DA4CFC5BBBB419E974F6
-:100970006C802F05FD6AE54C090A7C4867A05EF98A
-:10098000BDAB53389D9847C916EF815D30019F6319
-:10099000F966D5671F6E7A8F9DC9E86E7F9E681FC6
-:1009A000FA1D83F3F9E16456501F657C35B2AE073A
-:1009B000605E37F09941DEB9FCD73EC2E55D97FF36
-:1009C000D04D9331FFABF7B91CE17B385F42BFC21A
-:1009D0002994BFFB5689F4839585A3C979AD2AE490
-:1009E000DC9C1FC92FD07F458A33F00DB69340742D
-:1009F00020BF5ADE4A78DFA857B15D57CF7A7539E4
-:100A0000CE17FA204F067D7059B73E60ABB91EE88D
-:100A1000DDEE0AF2F59B1A7AEE69945F90D7A00793
-:100A2000E557F5E3F88F6FDCFBE19D20B7C7EB7569
-:100A3000B935EBD548B92D7869BD847C1A29B7C77B
-:100A40000BC04A8926B7F03CAADC16B4FC4BF4AACA
-:100A50008EC7C765B35ED5F5646FF88CD49397CA1B
-:100A60009EA87A127EEFB3EC9EFCA8F3A1CE7F4540
-:100A7000BF29BD80FC093A9FEA7CD8C5A73A1FF67A
-:100A8000F0CF98F018997F3BF2040CC1BF5D257F31
-:100A9000624913DF8F83F7DEEC9F45F8F2D134C74C
-:100AA000AADFEC9F68844311707D44795F04EC8F6A
-:100AB000281F88802B4CE54B1AF76A8CF8206C2A8B
-:100AC000679DFF2BF6459475AC3E0F95379CD482FD
-:100AD000C81F699D1AEA3F752198A8E83FDC299351
-:100AE000FFB00370BC04DAE9D898110A821E596C71
-:100AF000E7EBCD0E77A72B01D2C5F11CEE4CD296B9
-:100B0000A01ED49F77DAB91FA4C3DFE98A37F83172
-:100B10000E36C9A4C75B426C72343F09CC3484DF03
-:100B200016D65B3EF78F76E0BE33B687FBCE40CF5E
-:100B3000AB6547FA7C5CBF56CB5E6023366BC1ED7C
-:100B40002E74A177340DBA711A3C9FFDB6CCB76DE7
-:100B5000823EA5AF61DD7184059F182BE17EDE72B8
-:100B6000E29F994D7C1D326B7974792812EFE5393B
-:100B7000E669A87761FDF0B9D10FACD753B03AE27E
-:100B800079D3F5426EAA693D58546BCE0F88F5D4DF
-:100B900037BAFEC96499A47F70A184EB7AA1B7AF7C
-:100BA0009687DE380DE8D3B14F66B8BF7AAA4926DA
-:100BB000FA9CDAC8F753593089E4AF8C7592BED4E9
-:100BC000F1D686F27571EF7AAC6DEB9FB21F423EA3
-:100BD000DAF687E1BF82B46DDB27837720FCCA4752
-:100BE000E97F603DCB4FD865273F73C72E27F17F44
-:100BF000C7CEDFA53F84F0762BF9F73A767D3B1C14
-:100C0000F9B163A1B500F560C700BE7EAADAF9EDBF
-:100C1000F0169A7F17111D33148DE87DAAE92F076E
-:100C2000302EE054138C0AED8B5DB1245FE5AFDA12
-:100C3000C91FD1B1F3DBEC80E39F379E32B1FFD304
-:100C4000E164D35EC2FEC573BF79F98ED1CF2EC0E9
-:100C5000FDF186DDDA4CC89FF0DA5F87A37EED7880
-:100C600089DB4DED6ACB1ADCDF18BA485EA802BDFD
-:100C7000DA51C8FA31B66FD1C4F128473DF1F257C5
-:100C8000F2B39C2F3E26287C3DFBEF8F0FC9C7F5A2
-:100C90009F33649370DCDF1DF803EA895D56E24BF5
-:100CA0007DBCC7EB17903D73AE71DFFB3F6EDC522E
-:100CB000F87CC6BDE0DF9CFFAD8A87FA1729073DA7
-:100CC000F97CE703046F727AA9BFE7C9EF6BFFA74E
-:100CD000D1FD25A0BBEBDCE30EFF3F4BF7B7A70B25
-:100CE000BABB313EA0FCB5BF52FF7EA89E6BF93760
-:100CF000A77B6FE3D7EDFDB72C9EF733A1FC6456BD
-:100D0000ED40C3E2DAD23D6F6742EE5B697BE3B14F
-:100D1000BFE323F67BF4345EE5FEB6F1B8EF03EDF6
-:100D2000B27849AC17F93AABBFB02FFACFCB233B1F
-:100D3000A47FDA63644F30C5B312F72BDF4A9FE913
-:100D4000A5D80B36E2E300C2EE2B056C5E6FFE4ABF
-:100D5000623EDC4AED9F7EFD3EB473D3D264B28323
-:100D60002125FBF775D764FEBC4433AD87AEF598FB
-:100D7000D7479312CDEBA889A2BEAB19EFFFD50ED2
-:100D80002914023C8C1FF0CB44F4A78EBF48651297
-:100D9000C093586011AE3B263ACCF59DC07D6C8364
-:100DA000BFF1EFC5E3C42E3C0E5CE9473C0E90C991
-:100DB000AF7A4E3C62BF096F99218CC7618A97E375
-:100DC00031A1D44B7E6AB11EC76EA21DA3389634E2
-:100DD000A33C2BB89EE678A075B8BE9EEE0DDF4C06
-:100DE000ACCF15D1A48E7F254DF6D9CDF5D1FA5CC7
-:100DF000A7CB0FA5874EC77F942EC9AA992E698EBF
-:100E0000390ACAEB645C3F8CC4F2991C4E0B2AB4BD
-:100E1000DF24D60FD778E628418027A4652A48AF7B
-:100E20007CDBF6228C1FB57925EAC7C56D169A1FA3
-:100E30006C5912E17D488D42F07B16F728A4F7D457
-:100E40002B5E39FE20433FBB4FE306BA9FEF977CF2
-:100E50007FE6CCD86CF4C7F01FC67FDE00EBB75935
-:100E6000AB593806F0345B61C1B804F4934BEC73B2
-:100E7000939FDC0CE3EFAAE4EE7ACE55BE37BDF2C9
-:100E8000CF4E5F013DF6F9458C6DC7946F8A28C639
-:100E9000F5F68F9A38BECAF7B3D0401E8721FB0DF6
-:100EA000FB8A2FABDC3FF3CA1F5F1A89EBDC711D95
-:100EB00043E3B87ECDE271A962BD708A79E2BC0ECF
-:100EC000D4AF83E268BF749FEC8C16E7B841ACBF27
-:100ED0007F83F1289076D4B26A19D757AC93FCBEC1
-:100EE000C15A1B5B1F251E668D6A117E224137F891
-:100EF000C9D9B87FC3DB9F0DAFC619E9D636E5A8BF
-:100F000032BC271DF0F7B961FFEA1FC52FAEF711FC
-:100F1000BF1BEC2D93FC51F447BDC0DFD43DDF91E6
-:100F20009FF4D2A6B516E4DF4B6B2DA6FDD83A553B
-:100F3000F83146B011D8AFA97BECCE2CA4CB3ED96A
-:100F40008BF1A5E54D27B540947DC4487C62FDE852
-:100F50007F6F55DDD4EE0EB57E26E275C7091BC343
-:100F600075F576ADBA385A3FEFB4F27ECE66F5F736
-:100F70000DCFF8F7C3EFB80E47783CAE3F6B99F052
-:100F80008344F21F233E3E55C74238BFE27A15F52F
-:100F9000C2A98D8CE67740C963B8FE0679FFB1D14E
-:100FA000AF7371E396DFA05D50D624B9714BA24CAC
-:100FB00069D1D08F5BDE182FE33C9CE9D1E36FDD74
-:100FC000C36E35C845ABAA10BEF68ED97117B6FBF5
-:100FD000659BC6D04EF1BDDEE9C279FCCBA691245B
-:100FE00007BD8DEBE54A563411E31C843E8CE48743
-:100FF000A11B634CF01572A01FCAD7546BCB3C6F7A
-:1010000014FA2DD324B18F789EFA2DF4FF997E7BAC
-:101010005FD76F01D96F9023BFC09B41BFA544D359
-:101020006F73254F0AE27DEECE412948D7B96FABE9
-:1010300049D1F4DBA64ABE2FBA59C44D7734807E1D
-:10104000BBDCA0DF1A40BF45891F19A3E97EFA73F4
-:10105000E8B7D0BF46FE36A17E8B32DE1B04FE749D
-:10106000FD36BCE920E9B7E10D16533CF0444DF8DC
-:101070009B7AD56F52D2AD681FEF53BDB151F8675F
-:1010800093B0C7378B38466C07F55C95F6C3F45CB4
-:10109000DEF9EAB97F119E753D37772BA3B8E89E3C
-:1010A0007CC8F5DCDCEDA0E724E447AEE7E6EE64BF
-:1010B000DC2F17A1DF86F4D06F8CCA9785F9FBE58A
-:1010C0008D194FDE0DF58DF0A95E1B941FD1ADEF8C
-:1010D0004619F55D95D68BBEDB777EFA6EABD07781
-:1010E000A0C706A27E8DE40F6F9339DE7CC7E8C3EC
-:1010F0001B5F4679F99D4CFB92EF59F8FED13BA35B
-:101100000F67217F7D2AFAF3A2C6E9D95E19A4FAF6
-:1011100027BCCEC757BA91FBCBCB1AB87D58562BFC
-:10112000873CF0E7A431DF69D8FFC29D124B01F87C
-:10113000266BF5130EB4EB9F5799581F4DC934F029
-:10114000C3AC9C62F2FB57D95DEBF0FCD12C85D986
-:10115000D0BF5FEC987414EDE0E21CBE1F502C9ED3
-:10116000EB71B0B3BBF464443C48E39C37FBB39EE3
-:10117000711653AD9CAE539F954218B7DA33EE22E9
-:10118000447AA1B8CEFCFC5D217F37C92D842FF6AF
-:10119000AE1C35EE432FD785A77D024F8017139ED7
-:1011A0004252543C01A5A7642677E3A5F0772D4B66
-:1011B000705FA0F02989F69123C7ADE32D72FC3A48
-:1011C0001E753F77B1A82FBF692D9D6B8AC48B8E8A
-:1011D000E7487C74E13D021FEF695D7EED9118D711
-:1011E000047C437A26F89F801768C73FEE22D3F924
-:1011F0009B8F045E46568F9B80E10F37611C3AE45B
-:10120000E7D5CC79B32FE063D4C79E11389D5E310A
-:10121000C61AC07DDA0DF64ED2833A1F0EB3723E67
-:10122000D4845ED9D1AF623CADF31B2537DA21E51A
-:10123000613BE1B51CF8D10E45F63EF5CD24815752
-:10124000379DAF6A14F313D0C182EB267DBE0AF13D
-:10125000F358239B385DCAEB385DB25827EDC7942D
-:10126000D548DE308CA7AC710EC5A1EBFA197E0E05
-:10127000239DA2F0AF128D7F193A9BB3BBE7CD62DD
-:10128000516EAAB5FA43DCE7990AF2B196D810FE7E
-:101290007716FE3E57FC5024BD2E1378DB847875FC
-:1012A00020FE3AB9FD15FE8ECE69E9F9E54AD084F3
-:1012B000D7094F9FE6FCB753F2A05FAC0B6FC8CFC6
-:1012C000903F4AC71BF233D2A1295746380FF0DDB1
-:1012D00027A3E77871BFD428F7853B0FF2FA9F91D7
-:1012E000BC2CCAB87F307FFF40BEEE4DDE8759C5AB
-:1012F0003A41F0F73BF6CEFD2391BF774ADC2FD180
-:10130000146FDAF7BCC1CAD74D1BEC2007B8DFF663
-:10131000B6EA5DE7E9A91FAEB27239C0F584C7E04D
-:10132000F7BA040782F1A675368A17A47E0CE4F694
-:10133000AA515F6FB2B3A45BB37AAF7F8AA8BF37FD
-:101340007B498787617BA8471BA1BD21DDED45CE89
-:1013500017BAFFE05CE3BA43F0CFDF3B2EBD9D1F21
-:101360001A4F55CE9A695F4C8FAB4AB5045E51D186
-:10137000BE9B2C99E2B7A0E782CEFF70FDB76AA3AF
-:101380007AAF9FA5DAC88ED0CFCB5E2D3B5810F038
-:10139000F6A54F2579012BE383B1387F8C8779102F
-:1013A000922FF78FFAE86ECA97699FEDC6DFF5298D
-:1013B000C57DC81B790C1DBB315322FBE13DAC6CD4
-:1013C00034DAE136E6B38A26213FE747F1213CD7FC
-:1013D00092595B3DC103723DA22E5485A9774267A5
-:1013E000E23B48AF7132437A35FBFA4CC0F9F7BEA5
-:1013F0003FB34CDC8A073B81EA19B18F2561B931D3
-:10140000BE245ACE8C6EF8EAFD5BA07FA3F7CB5EBC
-:101410000F94BB69AFC381723664B585050C78192A
-:10142000C34255E8771A7DC8770BEA8302B07BF098
-:101430007C4941D3DA2A17C2AB257ABF3C1898E41D
-:1014400082FE6DAA3939E932D40B500EAB295FCD3B
-:10145000CB95D74A5E0C71CE6B5A41F14879B512E3
-:101460001D60DC1492988DD71BB241BD9B56C3FB07
-:1014700059387FC1FB586FEDC9F76F41BD03FDA41B
-:10148000F737F2FDFA3C78CF8372523B87EA2B5C48
-:101490002D313C0753B091CF4F05FB552FE637EC6C
-:1014A0007E8AE6DD29D05EDF0C9C8FC213E93CD139
-:1014B00048C94DE7381FBE80F456070E185FF0A5E7
-:1014C000F3F80949C062FDA3DB7FFD6DFC5C539E10
-:1014D0007781D607EA79272729C342FC7492F6E17F
-:1014E0000F01BE03569C37793CCBDE9C2FB416C34C
-:1014F000FC98631B44EFCF6A1C47711EB3999FE2AF
-:101500003CA68EE676E7BB57DA43E8EF7B57ED4C17
-:10151000C3E77BAFB4D2F3F64D5C0FB70F6821BFC2
-:10152000FBE1D52AC3F32F55AB65D2138737AA74D5
-:101530006E577E86C737E46FE276C8DED5BCDEC361
-:1015400075DC7E9BF0CC6D93701ECE5FCFCFF9EA39
-:101550007A5A5F87E6B90B4DF35BA49ED5F570A967
-:10156000C04741F55ADA4F8FD4BBA5FA7C18A16F5A
-:101570004B719F9DF6D3C32447A5F591F1658E6EFF
-:10158000BF0DF243F83BE2EFB2FD2AC3758DF4457F
-:10159000DB248A67C3F91EF24737493E8C7B28F863
-:1015A000D81A227B3C943BE33F709EF9C4CAF0C832
-:1015B000482BD203F4548EB5F38FBF84E747DFB3D3
-:1015C00061E410F04F2EE15F8F13CE5ACFE37EB26D
-:1015D000DE5B998CE78DD9C43EA407F26B641630AC
-:1015E000E88DA392EF963BF9FCE046FB47A76B968C
-:1015F000569D87F36C918DEB47CF7A95CE8BC70BB9
-:1016000018D60B3EB4770AB7AF48D60CFC50B87367
-:101610004532A80EB644C4CB548973E6851A6FA729
-:101620007097E45E6B6847AF47AF57DBCEDF1BB404
-:1016300093A7BDD55F88FDA3717EADA1DE88ACA761
-:1016400047FBBDD493F35FA757E2B9FF9C77650AC8
-:1016500076CFF962CA20E33E8F9EEA7EE6ECF72D54
-:10166000CC67C05FCE1F6398CF40EF865120FF400C
-:10167000BF1B1AB93DD730EAA0569A45B01BE5BD4D
-:101680004CF8A3CB26F2FDBB86CCF716A1FC4FC9C4
-:1016900092881F5830A0F54924FBCD83FB00F959EF
-:1016A000FCFD7C781FE5B2E1292EA7A02F3CA84FB6
-:1016B000CA56AF9844E56B250FD6DFB03697EC924B
-:1016C000821C99517EED41B2930A1A0F26A23C83E7
-:1016D000FCAE447BA06CACD58DEA58974B5DCEDF59
-:1016E00015E76199CD3D0CCF77E0765834F996F740
-:1016F0003361B772B92CCFE172FBEE261547783E05
-:10170000724E72ADCBB18C729CD52DC77B574FD02A
-:1017100050AE0F87248AA399807A00E57C831EE768
-:10172000C4EDD8F395F373D999A520BF385FEA7259
-:10173000AECB75A43C372B2DB7623FEEBBD24EE348
-:101740009870D5F60FEFE3FA8AF65F275CF5603202
-:10175000EAC73C85C779E9782D55785C608F7EAD06
-:101760005CA0F53D9FFE45F4E333ABD95F126F8B70
-:10177000E7F1EFB52AF1FDB9E4B3879C9DA77C9E04
-:10178000AF5C9D4B3EF5F6E59DE67AE2916947F543
-:10179000ACAF1DF018063CBEB5F1598A0F3EF1C240
-:1017A000C1A94887E21DC0E7C85F1B9D2C8C7A4EFB
-:1017B00009D1BC55D420D33903A684B36F711AE57F
-:1017C00098C775156F76123F15BD640D4D81F78B67
-:1017D000B67D319CE26A167652DC5AF005612F071D
-:1017E0005B86A31C14293CBE2C522FFCDAC6EDE705
-:1017F000B6EDB1D3707C521DBFDFA2A8FE76D56ACC
-:10180000D8A778C2A652BB508EF67983C0C778FE9F
-:1018100017FB67BC57418F2B6BDBC0F54451A31AF4
-:10182000C27B328AEAB6B463BC71D1C756F27F95E7
-:10183000D79DA4F31413366F22FF4A79A36CDA8F75
-:10184000EB11DF592787AD1897D8504AFB90001F3E
-:1018500024B85EC453FEC0F8C3E2CD3BB705018592
-:10186000C52F3FEF42FD72AC79BD0BF10EF59E35F1
-:10187000DEBA473C67FD23229EF386C3746F4B2F6D
-:10188000F19CC7F00F1094B76DE6784E56D787ECF1
-:101890004BE867B63FCAFE47977DBEE9EB35781E39
-:1018A000A1EDA5E36BB0DF257FFB720DC689B15DAD
-:1018B000769AF7CA5FF880E2B7F5F7BEB0097FC83D
-:1018C00086E729FEBDFD13AB176B6BDF79381DE38F
-:1018D00006DBB77C978CFECC793BAF267FEFBCADA7
-:1018E0001352589479434F917F43E7117F1F49B7B3
-:1018F000BD0D7B299EED04D01DF560579C6E7D29A2
-:101900008F7FF688F8DC8DD1CF3BF488C76DB8E5C2
-:10191000C62B51FF37707BF29C71B9EF033D2F3F0F
-:101920000F3A6E14F1D7F5379C352EF704FE01F40B
-:10193000B2D8CD74FCBA61F6AF9FC6BC863EBDC6B8
-:10194000E586CF037FFA798A776C3EA71DE5E8A587
-:10195000DF503C34D26F8A07E7A3AFD3F13CCA1102
-:10196000B5733ACE3F9D3BAD74DF4FD1CE8F489ECD
-:10197000DAB7BE477E6A26CE35B4B3AE1F8F3F9727
-:10198000C4786B9D3C9E57D001E37D3D2E7A2EE2BC
-:101990007A395FEBF1BEBDC5F95E6D1F28EE0FE031
-:1019A000F1C8A5B57F10F1B3DD749372905E07CFD7
-:1019B0001A47ADE3C12DF472771C7BF4B8EAAE3858
-:1019C000F608BA213D719EEA8A5307386D04F94939
-:1019D0003E8A762EA27D2D8F7F6F57A39F37D6E349
-:1019E000DA7D11F4D6C7DB9BBCE8727BAE71FC508C
-:1019F0003CD16642524F7CB57D1F5DBFCFB44B7F5B
-:101A0000D7FABEEBBC548914791EEB5EE4CBD286C8
-:101A100083E4CFEC5A7F8BF1B609FF7BDB0B32C539
-:101A2000392FA9DF4BFA3D527F94E1BD2D51FA7B4E
-:101A3000BF5DD8E78D7CFE687BC91972403D6D7B28
-:101A4000B6135F976D3C4871D66FD6BDACB518E242
-:101A50002770FE0819C6D3F6E2EEE1A4CFC5FD302B
-:101A600091ED548976CA9BA2B753BEF1A4A99DE219
-:101A700060BDE6769CBBBD638AEF76ACEF5833B7AA
-:101A8000138FD5CB9343D1F669ECAAD8EFAFE629F3
-:101A9000CCA3740F8E93DF7B23BB62C8EE9CE7CC94
-:101AA000F9382E11538DE2BAAA168838B09F7A53AE
-:101AB00091DE55CEEB18F67731E2D7E0FF51DD012C
-:101AC00086F6AA9AEACF42BF43A4DED1122D2C6437
-:101AD000A0F73CE7E4140FED8B84D3909E07320F00
-:101AE000AB58EF6711FEABCF14B62405FAF7595087
-:101AF000F22E807AD9F75F0CF03B7BD6AFC381879B
-:101B00006593BFA9CCDA7900D72BEC353BED47C8FC
-:101B1000BBEC747F48F91A3B8D77EFD66F9F23BBE0
-:101B2000FBD756C6F787605583F796B9791D87B7F7
-:101B30007EBBE62F6857E3CBD07EFE1A288FEB8959
-:101B40008DB1B4FEE978298EEE51CB7FEDA1A9A825
-:101B5000D7F263393FE66F4E0955417DAD491C6EA2
-:101B6000DD3480EEAB287EC949F1A57BB7BE528635
-:101B7000F354FBE6580C3360EDAF09FBFF37E27E10
-:101B8000AD1AD5638C332F648AC7782EA818615399
-:101B90005C13233F06C911FAB11AE3E83C11D8C51A
-:101BA000A67A4EA89D0F78898F83FDF839AA703FD9
-:101BB000D40791E5F4FCFD767E8EBDDC0AEF39BAE0
-:101BC000CB976B9D791CAEEEC7F5493395FF44E783
-:101BD0007391DFB35E5EFE23BDDEAE7AF8FB65E295
-:101BE0007E9B48FE3DD4A557FE7A71B4FB5BA2F400
-:101BF0009F9EDF2FB1A005ED962D76BAB70BEF674C
-:101C0000C0730EDB34BEFF55E20AD3FD393B843E80
-:101C10002E8909D37D3EFD443FB03CC2CCD6F22292
-:101C2000D2BDF4153BC3F8B3D2D79C3EA477E9B636
-:101C30006F5B7F9585F18BB1E4D72B7DED7F111F15
-:101C4000945AC3D3E9FEBC2D5686F7E7B56D793BB0
-:101C50001DE5B54D0DA7279C655FAFB4DE6ABE5785
-:101C6000408CE35865E842BC77413FAF5BD48B9E24
-:101C7000B93286DBD7F6189F3586E4DD7C4FD4B1C8
-:101C8000CAC641C6F3FB459EE87AB17F8CFA8F9DA8
-:101C90004377F438F7DA3F2609ED99E66474409605
-:101CA000813D8EFABCA8EEE430F41F7C16A3DF6FF2
-:101CB000E089C3F9E833AD7318EABFCFD23B871987
-:101CC000E7992395368FA2925F87D28EB527F3FAD4
-:101CD000318C37B54F8BA6F786C5C412FE8A1E8E8F
-:101CE0008D7A8E7A4C0CE7AB34681F536C17E54342
-:101CF0006FF7332D447AB831C6C3EB490B69F8BC92
-:101D0000B86EFB20231E0A956A2A07724AF82C64D3
-:101D10002BB52C83FED6DB2B9CEFF028743F81F291
-:101D20007FBAF855EEA6333991318E51E014665CD6
-:101D3000F233EBE74814D56F43FC69CCEF5664648B
-:101D4000956A92F718564FA903CC2E7E5F5A054329
-:101D50003D7944ECEFA31F0CD36E7C3D487A3F38AD
-:101D600080B18B32F0BE094F9CDB80BF6B70B33EFD
-:101D700009E3692B18D71753DC688F48C1003B0370
-:101D8000FC5455593788DF03C27C182F49262CF4A0
-:101D9000CFE57EF33BB483804FF93D8457B15015B6
-:101DA000A018C386C9EF3A9EF1FBF3967DCC8CEB6D
-:101DB0008F12410716DC4D7ACCC1BA7F9D00A35A21
-:101DC000457D5B15F7B71CDC9F73B85918EDC358F8
-:101DD000070BC742EA18AA1C33CABF2B0B60035F6C
-:101DE000BAC79AF323E502F45A44BBF5843FA8F737
-:101DF000AB887ABF8AA8F7ABB3D5ABE3A9DC3628AA
-:101E000003EFA5585C592FF0C6DBB309BC017E86F1
-:101E1000E03D7FCC12E315FBE684D718D11B2B964F
-:101E200007BA6E8EC9207EFA59DCAE4E8C97668951
-:101E3000350CD7C38B24FDBE4FE67718DE636E1BCF
-:101E4000C9E123A29DCD02CF8B74BF558FF276B22C
-:101E5000BF7A94B7F7563E267A79676FFD898DDE93
-:101E60009FF85EEAAF8E8D5AFF0FD54B65AF7DF4BC
-:101E70000EEEEF76E92737A0DE6C676E46FD541A4A
-:101E8000DFFAB7167AC2ED4C5B9A99DE31C8DFC033
-:101E90006F31179A9F47F24914FE72F48571DF295A
-:101EA000DABBF3617E5E4DE7835C31BE89B57C9F12
-:101EB000FCEE79DC8F07CB461FE6DF25F2EFAEE1C3
-:101EC000F6E3DD0FCBB40F1B79BFD5C1FFCDEFE13A
-:101ED000B8071F80BCDD335F0A8533A2DDDBC5DEBA
-:101EE0008F877A6788FE44DE8315609E49CBE4685D
-:101EF000F76071BED4CFE145DE7F318BF9C5FD6659
-:101F0000E6E759316EE2DB2225A4550FED9EC7822C
-:101F10002B80EFD1FE04BEC7FD2F599CC7662E8DC6
-:101F2000C7D7DF9A60D27FA78678E270BE66AF8B94
-:101F3000E76EFE7CEEB59E14E37945E574ACE91ED0
-:101F4000A02AD59B8AFA4D3D7D3DF3801C6AA707E8
-:101F5000318F211FEC56127E0CF3243D95AA84503C
-:101F60002F2A6E3FCB47BB379EF3B35E5E4BBCAEB2
-:101F7000CBCE7C17FE1D46E681FFCF5DE1A1F3DFEE
-:101F80005739FCA771FE955D39DE80A3273F04B762
-:101F9000F27157E1B8337A8EA74AF37AC9DEBE0EE2
-:101FA000E645F2CB796DD83FD9EAF9C883FDFBADA0
-:101FB000CAD00FD3133FDE2321C83F15EA4F712447
-:101FC00072DC94C1D8FE72BC6F14F4FF3271BFE8AA
-:101FD000A24A26521E57B708EF1FA53447A43E91C8
-:101FE0004EA6728F8A7B4A97547A29D5F16BF356A5
-:101FF000D33D98B60B79FB36B7A05FA245E02F40E2
-:10200000F6972DB582F61DEDEE8A30DE27C7D26039
-:10201000DEC161B9AB09BF9A9B91BF13CA136C456E
-:102020001852B5660AD1497157B07CC84F7504067D
-:10203000C7A27DE331DF87694D1D71D6FB31BBF847
-:102040006D13C7FB6312E7B748BC3FA6367B306E03
-:10205000E2B16BBBEEAB22BCC37288E3FD3FF97EFD
-:102060006E4FBC374F9B69C0BB337B32E1FD6702CB
-:10207000CF4B055EAB041DAA043EABC4BDAF55E219
-:10208000DEDC2A81DF2AC43BA48F887B7B17233DBB
-:10209000209511EFC0BFD6A14126437B7C0F0F5284
-:1020A00087E05BB785FCA4B2C3EF43BC5B1339DEAA
-:1020B0006D0EA003F135E0DD83F941C2A7EAE078B7
-:1020C00086F29C0E025610EF23F139A707E0FDB609
-:1020D000D824D487634C78D612C79F1FDE9FE2F3C3
-:1020E0005BA290F348FC256AFC5E605DBE7BB38F0B
-:1020F000AB445C7695B89711F18876CD2AC00FBBBA
-:1021000098E3933F1F22602FA54962FD5F0574C0CD
-:10211000FC27853D8478C674672C5FB7245A2A76DD
-:10212000AB88A7047EDF0F4B0CB2B46CC64380F1C2
-:10213000971A641E84F5FDE15A33FFC86E25E27ECE
-:1021400049CF93C86F2BDF562DB87F2FCFBFDE74DA
-:10215000AE5B9EE68BF710FE0312DA353F1372B8C2
-:1021600002F985FAC7D7C38B051F2C15F7063F2246
-:10217000F8E73121CF8FEB7CE3E5E748964FE6F1B6
-:102180008E89991671BF629819E309E3BDF54C83F6
-:102190007ED1DAC64329DD9FC93EB692DCC60E6504
-:1021A0003EE4AFF88F1F0CF1FB70FD7DD11E8AD786
-:1021B000EFBF1DEB89BF830EB4871571CFA4CCD7B9
-:1021C00093CD51EF8DADF2EEB1A15FA6B7FEECBE9F
-:1021D000691BF173DEE5441ED627E0BF6336C08E6F
-:1021E0001A5857C12FD61BC85E8C7AA5C649FCEB7E
-:1021F00080FEE71BF824B617FFCE54C7B51B505F0F
-:10220000BC80062430C12F6A06D911CF80730FFA23
-:10221000B156A9FEBE382FAC8A8FEE8FFB652CDF3E
-:102220008770655D6AF22BAC547DF49E7BAC59EFF0
-:10223000AC14F344C244B39CE8F3C24F457D573914
-:10224000023BB15FC9A727923C27DE1C7D9EA852A6
-:10225000B520DEF751358CCB773057E3F6730FFDA1
-:10226000C3689FE45460F03AF483E97CB690717DD2
-:102270001764DCAED4C7F504F2BD15E70337F13FB0
-:10228000CE0708CB176AFCDEE3BB2DE4875822E4B7
-:10229000ED512167CB857CFD1CE5CB8AF7587B2966
-:1022A000FD8590AB952887901E8FCDE0F6BCB83F9A
-:1022B0004C5FCF2CB48DA0FB22AB1C169A17944F09
-:1022C000AC2107AE0F768F76A3FF477666B9034E33
-:1022D000CCCFA2FBDCA5F82C37F2CD37CE59179C1A
-:1022E0002D1E16C84FF7162B2AF74BEAF7C8578949
-:1022F000FB0854F7CD0CFDD54F2656D829DE359670
-:10230000C787D7E46613DE811E9DB186755ACAB4AD
-:10231000EBBAEEFBC3EA9FECE55E83EF85DE606916
-:102320004176A1414FD488FB249927C88618F4C56B
-:10233000C28B2631F4EFF5D413BDE8CDF55C6F2EDA
-:1023400092A2EB4DDD8ED7F566A47ED1D3C5174C96
-:10235000369DBF541D5E467A6748743F42B2C3CA79
-:10236000F72F99D79B9BD1331FF095EC30E00BED05
-:1023700021DD6FF1E328E389D49347AED3E7D7009B
-:10238000DD3B344BF33C39FAACF3AB795EC83FFD2F
-:1023900008CD4F79A747535A50732DD9230C77692D
-:1023A0000CF72E1C5E7DBF0BE97BB846EC9FAF5649
-:1023B0004318BF74B8667119C1D5760FD266DC2F89
-:1023C0001E74E13D4DB3D6C8B49F7E2426984EF1CD
-:1023D0009FDF9F39231BE26316AC5D9A8EFC386B3E
-:1023E000DD523A377B24C137D86F80599687EC7914
-:1023F000FDFEC6BC67AD3EB4C77BE3DBBCD5D1FDFB
-:102400003D55F827AE53987708AE4376BBC6748621
-:10241000810F8EFCC24EEB822A2DD88E70D5BA5811
-:102420007C83552544BF0F28D571B50FE994EAF098
-:102430005D8B297324D07E4FEF72C4DB6F455F3B09
-:10244000EEBB3E2DEE45023ADD64F2BBF27DD7567F
-:10245000E14763B65EF26344BEA7977C178F936231
-:10246000EEE8F97FB7FF69688FF55D318EBFB4E69E
-:10247000F8924FE889791FA150C48BCF5A171B5A85
-:102480001845CE6689F3C7B3C47E99CE8F85D7EB46
-:10249000F639E7E3483E975EB884F8FACB7D2ACD5B
-:1024A0006B65C0AFA8EFA51746D37D500B9EBBE26E
-:1024B000718C0BFC6ABF4CF925A7EDC4C7ED3FF545
-:1024C000D23982CEDFA9F49D88AFF65D4DE701DAFF
-:1024D000C5FDD33A9ED29C7C3DBCC6C1F550DEE919
-:1024E0009F913C74F15768A686729E77FAE75C5E0E
-:1024F000F0FED93138ECEBDE1C77A1E06B80D72CF5
-:102500009F346921D49BDFC2E58A8D0D96911F7B94
-:102510006DACF7D128F2BFC6E131F9B5F25B96F3A5
-:10252000F7C0AE4C34C499CC12DF7BC83FCDEF6509
-:1025300065EE204B457912FAB05B0ECCF772B7DB33
-:10254000CDE3D4D317BBC6798569FDD63DCEABE8C4
-:10255000799EB053F25B4613DC3D9E5F8D8E369EB6
-:10256000EE718CA5F2EDF1D1DBFF50B4DF5A59C00A
-:102570007CA04F8BC4FDBF79A1FB34D41F79ABE3A2
-:102580001324C3B8F26B8A4DF14F7935B974DF5F0C
-:10259000FEEA5CED5E83BC76D185CD36D1E543475E
-:1025A00080E832D5E1DFE340B97CA1F0814F3D58AE
-:1025B0002FA7D3112D38BC82F4DB7DAE68E7A73E90
-:1025C0008CA4538DA013AC1FB20C74D2E913F97E06
-:1025D000EBFAD2073EC5FD8BA7F8ED45BDEBB10880
-:1025E000FA6544C75FA783F36B2BD80F81F3C2DF73
-:1025F00065A6F8BB5EF127E8ADE3477F0EF6DF5135
-:1026000094FB4E94CD51581FE78773E1ADBB7DC15C
-:102610000FE3A28F27C5A9F3C37C1604013EAA715C
-:10262000FBA3F7F13CC482B6F3184F979C2E36F10A
-:10263000438A7301975341FFA37B1E21BE6E0DC5D4
-:102640007AED19BD8F27C5D90B1F5C186443B3FF02
-:10265000EFF1C111CD37F8299C4760DEC279BDF09A
-:10266000F9C7861BFB97EA1897E6C479A9FAFCF626
-:10267000B783E3BDFB701D1E5C277BAB6048258ED6
-:10268000C0607CBFC8F5F437E8DF5B14FFC4F068B6
-:1026900076F4E2CA7D97A0DFB5AAB2995255D8C5A3
-:1026A0000CEDE20CFE5D8F68F7055E2BF4EBE2CAE1
-:1026B00066EEB7B50599DB70CF003B3292FCD88A45
-:1026C000C36CCF696AC08D7E734DDC83A02A81659F
-:1026D0001959E8674ACC0C1AF0778D93EFD72C4F35
-:1026E000DDE3C6FD102BD48FFE335B9A72CAE4770C
-:1026F0007B5D99E5043AE9D744C7B07A9F24911FDE
-:10270000F254841FF294A91F89CDA67D8A48BC2863
-:1027100036FE1D288509FFB3C087FE9DA4A56E3E29
-:10272000CE95C28FFD04FAAF2F023B36D645F6C1D7
-:10273000920B2C7C7D6853E8BE2B6B3C2FAFC5F110
-:1027400071D871FF43C6F559986027DE1026D3D59E
-:102750008B12C2F1CC2321DC878597E07AA3635CDE
-:10276000CB03F8FC797B20D70978FFA66FF301092A
-:10277000F733FC818B11CF357230D303E57F2D7792
-:102780006662B974C8FA3881A717E0398780619FFB
-:1027900094DFD7DC0DCB3DE10BE62B11FB86DF5F31
-:1027A0006CCCB7C7F82AB01F91DFCB4AFC42A2FD20
-:1027B00041FC4C079FFFFD343F2F77F27505F10771
-:1027C000F2D73E6E3F9D523C71B8EF87D879DDB4A9
-:1027D000EF63F3BC6E684F11EBD85AE057C5B04FAA
-:1027E00077A1E2B3203F5D540DCF8DFD8D62272789
-:1027F00038E8DAF2A876BDDE3F3CAF83F8944F4F5D
-:10280000227B24922F7674ED27F0EF69DDA1339EB1
-:10281000B288C3F14CFFD1FAEE93AEFDAA451C7607
-:1028200073A8FC5EBE3FFE696E1CC599EAFDB8A3A5
-:10283000696933DAC57734F59D89F8BCA3E0E23FD6
-:1028400063BA43EDDC138BFAE27E89CE97DDF9C1E2
-:10285000EB6A2CA45BDF5F47F71F3C2FE4713AEB78
-:102860005491FE01E6D6F87E5788DF47C5BC02AE1C
-:1028700057D15F71773874DB0D00DDF37AE80634E9
-:10288000F7A6EFEB7C03D543A0DE3D89F694F4F781
-:102890001ABD6F7298BFD7357EC546E3E91EAF8D6E
-:1028A000C6AF8F0F7A4AF8EFC28FB8F74DC7C7F897
-:1028B000997CDC77C4DE751D3BCB3AE00EDBB03F84
-:1028C000F3783EDE9F48FC7C8559A01F5F74FAF6C2
-:1028D000203F3EE3F4ED45BD5762EB4C570692BCFA
-:1028E000BC85CFCBE4C005C930FE130302172721F6
-:1028F0001E9AFB9C97BD7FC0CEF9FB809DF3F781AC
-:102900000C9DAF5B9CC8D7EC74228D53FF7EC792A1
-:10291000AD871FBB1DF8FBC4DBFC3EBB52D973E384
-:1029200043E4979699312E3E323D20FC0C2D5D7C80
-:10293000C8C73B43E1F232A32196CEC1CC982F9B6E
-:10294000EEDB9F319FC7C332A579F8ADA675C222D1
-:1029500011D7D2B31EF48344D63373FE04BA17657D
-:102960009BE61E477E91359CCF664EF4C9788E60FB
-:10297000CC3289F6F1471FF234B6003C3314EF45F0
-:10298000319DF9E07F0DC2FB51CA9AB97F34459E53
-:1029900093F9534857EDE1F33DC273104F0E9FC7B3
-:1029A00061D8CF69532B32DDC8CFF7387CA80772C6
-:1029B0006FF57D8274D5FD22FABCFB0AD801181789
-:1029C0009A7BB72707F924B7DEEEA3D4C69418D0B4
-:1029D0006BB90AB3619AA231C58E690CB3619ABD15
-:1029E00050D84F353791FDE0CAF16B78BF796ED37F
-:1029F000F35FE3FBF94A78B764E0ABDCA6B7BFA3AB
-:102A000073763E3FC5FD5E56A799D69FC3EACDF0CB
-:102A1000E58D6638336C8647EE33C36538366867B4
-:102A20008CF81EE19E9D5686DF2B2BDE6CA538F4BC
-:102A30005771AEA0785E3BE9C509C54DD91827711D
-:102A4000FC45A705FD953BFEFA32C559746E8A65B3
-:102A50001867B8FBD318168371BC9BEDEB30BF1819
-:102A60006887FED9E2CDF6B5184FB3ED529D4F43BE
-:102A7000140FB5ED6FFCBC4BE7066B08E32E8E6FB1
-:102A80007FFE45E4CBE31BFA931DF6AA14B4607DE8
-:102A9000C14738DDC708BD3E46E8F5E23AF37AFCA7
-:102AA0000A976EAFBA87E2FC372681E3BBB5B22F37
-:102AB00087C5772574FB6D8CB067DD40CFCF8776F7
-:102AC000D37988D0CF79A17B351FD16B410CEAB384
-:102AD0008EA3DA0CF44B5D5C63C6A3CEDF9784CC87
-:102AE000CF27BA24A1E70CCF33305EC5B32415E756
-:102AF000EF67A3DF537FBD8BDB192FBCA0E9F2206A
-:102B00008B7B2A99C770AEB25BEFB379FD319E081B
-:102B1000E935B0FB797144BB7AFDB12E2ECF5FDA77
-:102B2000F879824481876395FBC86EE8B2232B7DD8
-:102B3000BE890638AF6677722EE16F77F2BD86F9EF
-:102B4000AA64C3DEE4BB304EAE4E418F362BB9E3F0
-:102B5000B99F8F49C4E7723DF613F3118F6DF56F7E
-:102B6000B8B01CD8D9238C7167F93557FB261AE405
-:102B7000FE87F2B94EB71237C7CB2B39CD93F09CF5
-:102B800048710DFF8E6171FD6DB7DC80F85ECDCFB1
-:102B9000D3672BCC2F833C966CB9EDFA61F0BCFC6B
-:102BA00099515EEC0F54712B3E2FDE7892CE153D7D
-:102BB0006AE1FE8E48FA04059F3DFA134701EA399F
-:102BC000A8EF75CB087A7F9F05EC9B23E383EFDCAE
-:102BD00005458EB3FA0F6FA0F830339F02DF4B68C4
-:102BE000BF75AE97BCEBE8E9C2EC9BD154F72DA0C2
-:102BF0007879C88FBA7E290C99EB89A4EF6AC16FE6
-:102C0000F01B62E493C8727DA604E9DC74C97CD031
-:102C10009306FF43C9A16A8ACF8D6C07235898C1D8
-:102C20000EDA81E17528979B789C16FC245BB688A8
-:102C3000631FC461BAC715F91118A2F85236D183BF
-:102C400078BD994DC654D7376D39F5C3B1FCAB5239
-:102C5000CB73BFA2FA9C24E76DEE30DD6FDB4F9C97
-:102C6000476FF37058FFEE8F9E5FD464A7B8AEE352
-:102C70002734D2BF0B309E14CBBF68B758C0683D15
-:102C8000BEA5CF788C536EABE7F7A51FABEF335ED5
-:102C90003BCBBC1EA94FF4F9F620FE391AFD7ABED3
-:102CA0002617CE838B781C774A9F8ACC8A2874D2C9
-:102CB000DF4BD42A3271FDD3798FC3BB8EF014CC95
-:102CC00050C8EF9F4A7E9A5CE19F3AE8F6BFED025A
-:102CD000BA39A1AC0FFE25EC93D7A1DFF30BD9FBDA
-:102CE000807B50F73EFDACAC009DDFA30FF440FBB2
-:102CF0003315165680DF66E23C359C609A4F67AE0E
-:102D000096289E71D672F378F0BE6EE3FC5AC0AA84
-:102D1000A9DE22564F69C16A737E21CE472E3C2719
-:102D2000C7E3768A6ACDF9FAB9C0928D67ACD1F063
-:102D3000F635D3C7E7FB02C727DD6CA3FEDDB72A54
-:102D40008EEF7769CC87F36DE72A27E9FF6216A03B
-:102D50007EDC29E6FDF207737DB320ED983FD33783
-:102D6000AB0F9ECBE7F3232D19499EF9BD7EC5130A
-:102D7000597800BFCF87E1BC5BDC248587216C03D9
-:102D8000511DC19FE3BD26387EE379367DFC386E48
-:102D9000E373F63EA76F119E9B92F9B88DF9250259
-:102DA0001F251BAD267FD1988D52D079399EAF6AF1
-:102DB000A1F7CA1ACE584DF58A791DEC016607BAFB
-:102DC0008D29582BE3605675E9F1D025D1CECB1C67
-:102DD00010785C755B5E5F94DBC7D1BEED27109DFC
-:102DE000437A4AF8A358D806EDC58CEC82293F7B7C
-:102DF000218793E21EBDA6268DBE2F4AFB61336557
-:102E0000FF9B780EB3323ED0370EDA9969F1A52BCD
-:102E100024BFBEC1E46F9DCFF1F0E4888A4B2AA2A3
-:102E2000ACB7753A3F21D5539C40703B9FA79D5945
-:102E30009D6AC0201723E3B8BE8CDBD342E78F3AEC
-:102E4000B74A74FEF929E9209D0F7EEA5A0F43FF25
-:102E5000402AD009F5EF53125B84F7FC6535DC346A
-:102E6000E70DA473568C17E30F4A1BC6C9A50E1AAB
-:102E70003FB7E3622BD6E2BE54CA8C212390DF61B8
-:102E8000DC336E86E7A3E33CD45E5F07A77BEAC230
-:102E900060C6DCA1D8BE7FCE1B288FC362E8BC7C95
-:102EA0000AE0CA9940E932B4CF5259E66EB43353BE
-:102EB000A77846A04F7F958BB793649167DC84F623
-:102EC000E3080E273C2CF9D61113AEA07652ACFCC9
-:102ED000937AF81CED4D1BFA271C067A4FA8C8C43C
-:102EE000F65306F134510BA7613DFBBBE81EA075FC
-:102EF000C83C37237D3DEFBB7129B82EDCDF060BC4
-:102F000075D063FBD3F4FD97B083ECFB0B87F0F235
-:102F1000C24E9997C9CFE724A6EBF6152FD7A1FA91
-:102F2000E246A25E7D8FDBF95F397CE407BF42EBAE
-:102F3000E53C80A053F9E9581632CC0BE5D3BE210D
-:102F4000FBB3FCB4CBF41CEF0935C6959714ECA188
-:102F5000EF3B94B2663A9F505A6F8E83BF22267A17
-:102F6000BB3A9F979F9659306ABB9AF9F9E93E2C74
-:102F7000D8275AB964F3F3D392196EFC569453E8E8
-:102F800039CB6971E1FA710ACE47A8674296A07AF7
-:102F900079375DDADD2DA679A8DDC3E10EB1BFA8D2
-:102FA000E7EBF5B74FD3C4393D7ECF7B5B252820B7
-:102FB000C0CFD34D27C9DF5DD2B49BF0A3F3453713
-:102FC0009E6259D080A7E4AAE6B00564FCE9B8FD8A
-:102FD0004B875E0224D9A3CBF33B4B7D63211FBFFC
-:102FE0006B6190EFD8AC2E792775B3CA220BFDF038
-:102FF000EED289638D302FDFFD7EF3351381B7B2BA
-:1030000086F2F76BE3DE7B6B21C606759D3BE84CD1
-:10301000F73B0DB02D0276003CCC00BB23F213230E
-:10302000F25323E0345EBECD194E97BD8C6D8EFBFE
-:10303000E01A05F45C5BDFF074BC796479D547D79E
-:10304000E0F78E4BB3F8F77BCB9A24AF64D0A3653F
-:103050005E1E87E4F0B6683387221E9ADF447D50F7
-:10306000D228B971FDE0A8DF122618DFF318DEAB15
-:10307000E7EBD392FA83F45EAFF50FB1903C3F3AA1
-:10308000E4732A77AEFD2D36C5FC3DAFDEF6BB52AC
-:103090002D81B750DFEAF7C7B76DF9A8FB7BAA20EF
-:1030A0007FED7D7D7B499F469C5B2FC7FE38BAE54F
-:1030B00045C7E3A3434ED17DBA7F18D6F4019A07E2
-:1030C000B1F34E2EC0AB75FF547A7814DA5F7827CF
-:1030D0002FCE1F4F48A14B705E7A9A052EC176EF16
-:1030E00029BD68377E6AEC80DAF20C5E09F34DDCAC
-:1030F00049C2FF0167CB00FC64DDE9C7FFC2E1A460
-:1031000016BA09E6B6EAEFAFC1EFCD1E18D032C04D
-:1031100002F0F78F5F3A99E08B5A9E41F8C2EA04B9
-:103120000E0F6B1920C3FB03837D2623FDD6BBA3A3
-:10313000CBFD09A16FF4FEC50EF61D8943FBAA84E1
-:10314000CF3B782CDA067A757AD1B14DEB011FD3DB
-:10315000FF2396F4DDFAB65BAEF3131E827E8C6F0E
-:103160004C11F8A67991F4BB42F6445F9C0B13BA5C
-:10317000E9E94C6FF6D0BC7169C516B41F52A60FB1
-:10318000A579E35597EF27EE51DDE9E9249EFEC4CA
-:10319000EDE6FA5BB650BC46CA434EB2AB1E17DF33
-:1031A0006700B923FE7008BA58DC7C3CFF0D197328
-:1031B000D11B0080000000001F8B080000000000F1
-:1031C00000FFDD7D0D7894C5B5F0BCBBEFFEEF26AA
-:1031D000BB9B4DB209F979F343081071139318A9F9
-:1031E000D64D881831B50B22626B7149F84930C948
-:1031F00046AD162DBD5948548208D146040AB8E19F
-:1032000002622BFD82458C1AE88288F62BBDDF72A4
-:10321000EBAD3FBDD71B7E8A884256B45CEA6DEBAE
-:103220009D736626D977935CA87A7B9FE78B8FBEC8
-:10323000CE3BF3CE9C3973FEE69C33B31ABB86902B
-:1032400064428E25DC30C74E9FDF31E6159D4C224F
-:10325000A4BB33F49C494BC87B1221C44548F009F8
-:1032600053687B0E21DFEDD1047589B4DEE14D7327
-:1032700016D1B2447CBD45C3E5BD7FD5DEE5B3D2F2
-:1032800072312DD3E7AB12998BF533BD690E5AFE1F
-:1032900002FEAEA7E51E569FAE25AD589FC3BE7F6A
-:1032A000AA84DCE5A3CFD4763A6E297DAE9DB8B56D
-:1032B0009D8E6B918917CA0BE7166C5D4E616A7320
-:1032C000CC427889D79B2651F84E36E66A56D1769D
-:1032D000BFA7AFC835845C51E0CDB097D1F940FFAE
-:1032E000741CD2442795363CFE1C9837ADAFD77A74
-:1032F000B3643ACFDB1DFE39D0BE5EE39D42B4D04D
-:1033000089B7C07705B423889F39763BB627F2404A
-:1033100019BCFFFF084F95B8EE5F114F77EF34757A
-:103320009D2C24F8F705FDB7B9D7A12A07FAD2BA20
-:103330004E1A87CB77C3FFD07148AD2493143A2C33
-:10334000AB226E8DFF36E8BF79E9077AA28137514B
-:103350003DF42FF0BE4E0AEB52E9FC82FB24CF76FF
-:10336000C2DECFB2119295E8BF13E621E09EF7C30B
-:10337000E6347FD1F07C2C3F78A9E6765A9CB7E4FE
-:10338000CCAEEDF4FB790F59085186DBD31E719D4D
-:10339000DF7FCFB89A5C499FFADEB086E2EBFD1979
-:1033A000C4B39CB67B5F431A00FFEF73BC953F74B8
-:1033B000F7113285905FD9B5F89D49D083E4DBBD24
-:1033C00088E2B753224123D0C34C3DD2C36088D298
-:1033D000C395B0FE747DE8FBEE07278782747D06F7
-:1033E000C90091613E15C4BE5D89A9BFA300EB2948
-:1033F0009D044DB43EDA680E6D95805E28A0A55000
-:103400003F09EB5F95D8FA07EF30E238DD33191D3D
-:1034100076373A43C11C00B68B00DEC6A2A3947671
-:1034200082744864EF9499B6617C6CE372C1523A3D
-:10343000F0E2DBB43FB2DAE4194F1FB0843294BB40
-:1034400052713C4A0FAB91BE640647FD8FD342AB2D
-:10345000705C4F39ACCBA336EF7C781FFD914501F2
-:10346000F83799C84A63097D4AA4C3E8A4EBC0E1D0
-:10347000215D4F13A083BB60008A877F6F386F5335
-:10348000E8FB9FD825840308CD584E481D61F5758B
-:10349000CB2CC7A429F0D4860D09F4DDCA1BBC03CC
-:1034A00082BE72D9D348FBF373BA22EBA336C08332
-:1034B0001FBE4B80FE3FB7295628D3EFA7C0F2D3DB
-:1034C000EF0B87BFFF39F07D19C0C7E0276D166588
-:1034D000BB348C1FF1FCB980AFEB696FEC78629C58
-:1034E000F87E8FD9BDFF07F045F11E4E74015EB422
-:1034F000B8AEF1F0BAF4D1C74DB47E5E9BD6B182BE
-:10350000E2D3BFD486F315F0DE951ABD8EE48DECC0
-:10351000FF94A5A55C86F92F65744F961928E26281
-:10352000F1A21F2E53D25D48A28735D228EFE5F0D5
-:1035300001807F5177CCF7F8DFBF1A62DB09BE212B
-:103540008A14073FA72B459261DDFC125B37BD3E15
-:103550003A0FE4563CDC029FFFC6E58DA08B787CD9
-:10356000FF1BE0BB6C24BE5DFA814CE8D7BFD48062
-:10357000788AEF9F90107EF7B489044D94EED64B75
-:1035800012D2EBFA072D21909B83A6E80EC067604C
-:10359000FF8DB8DEE71ACD0AA14D36EA19BF05F74F
-:1035A000DB181F170C1480DC3B47E7ECA5EB73EE30
-:1035B00037DA9EA0248020A4E537DAAD40FFE75E2D
-:1035C000BE89F5B3DCA2105A0E0086E9B881E07F0F
-:1035D000B6118A57699611C73FB1570A19A0BE8F15
-:1035E000E239465E9EA3FF36940CCB8D41A800388D
-:1035F000FA2C08079D69238EF75D335945C76FD1B3
-:10360000485E0DAD6F593229D4CEE031C6CAD51609
-:103610000DE9904A86F9BF4573BCE0DE225627A724
-:103620007079AC60BB431285B3C9B83AA205FA05FC
-:103630003EA0F54BA03E67781D5A567FF417984779
-:10364000CB1E357D343DAF9EC79258BACA19A61716
-:103650004B29C317A926A1F1145E1B2F5B6A2221F7
-:103660002DE063E93472E22ADAF4E0C074A0235B4F
-:10367000692FA9A3CFC069E20D51B8A7F6F7BC36F0
-:103680008EB677D4443261BA81A5BFCD3B79D5F0EF
-:103690003A0B38AFE97F424BAC381E7E4741F1EE22
-:1036A000B662BB89B3AE887DAEC0EF92354C2F0FAA
-:1036B000C02BE01F99E9CD755C6F52FD8AF27A61EB
-:1036C000D704D4AFA0FF40CE3D95C0F431C83D90A3
-:1036D000336D8EAAAB1C749E6667D51447191BC741
-:1036E0006783E927A1FE88A7EB783D24DAA5E6B534
-:1036F00016B75AC76E47F90CF116DD90C8E4882C4E
-:103700006179D1AF753DAB103E19E9E6DECD3928C0
-:10371000971B48971EE8BC8984F440C78B8C24987B
-:1037200040E962116D96489F8BD71B8812B37E8D3E
-:103730002175B989CB85BB4904BFBF7B675C7D35EB
-:1037400009DB687DB391842DF0EC55D7B7507D8EA1
-:103750007CD6F78521F63DE966F3BD8BAFBBA33A76
-:10376000A4F5D3796F3051DDEA84065DB83E5397F6
-:10377000F5E07A269678731E06BDF22B9D672BA581
-:10378000DB3FF0F512F83966AFAA00BC9BB51A9C76
-:103790007FF46103E2E724D5E3B0FE6B1DE4AE598C
-:1037A000F479AE8D78F37580267BD62CDB483CAF60
-:1037B0007AC5D40074D3E0D0A8E82AD3A1C372F9A3
-:1037C0000A8EFFE596D0D61C44F714A0A7F25CA1A0
-:1037D00057C99499B47C4C47ED3B5A6E9963F543B5
-:1037E0007F03604FD0F2FD0E26CFEE77E8713D45A6
-:1037F00059CC57D00D1D07FB335FC59E028E654324
-:10380000ED9F6074C3F5F0BA46730FEAE121FAD573
-:1038100010A4DF229F1EF0FA0A972BF3C16EA1F8C5
-:103820007E851214C88F602FB35F293EE62DA5E573
-:10383000574E1779562940674CDEBCF21D3359416B
-:10384000877CF3CC4F1FFB275A7FFEB45E31D0FA42
-:1038500005406B74FD5E918817C60BBE680881BE7B
-:103860006CD2337BB469FF15CC9ED1FB372C8471AD
-:103870005ED079C0DE694A083DB703EBD33C94A221
-:10388000C9AB3A86CFE0CB16F6BD39F4B39FBBA0E7
-:103890003ED513A4EDA326FF4658D7748392887AA9
-:1038A000F9D75AC2C6091738285E8F8798DD7D9CE4
-:1038B0005649304EBF0DFBA17C9AB690F673A233E9
-:1038C00015E743E52FDA5927D618B682FC5D373461
-:1038D000AE84ED8FEB7CD3D368F9F88BC59EE5B44D
-:1038E0006AD0A70FEB293D07D632BBAF5EA36C01B0
-:1038F000FC90FD169C87588FC09AC5B5501F58B2D2
-:10390000EC16908F63F139C87B122337CF9168167C
-:10391000F0D3C686DCDE30E895FE891E54AFC44D78
-:10392000179FD28D9DB53DA963F88DEED3213D5FE4
-:103930006EFF40177239D343304E80CA6522F80FAC
-:10394000E5724C593B5A99AD63E095546EDFA9EB93
-:103950005312FC47605D5A9EFC8FF7972A305E1425
-:10396000E522E94A46BE3CA9F3CE03BA755487F571
-:1039700075317AFDA483D999F5066E0792B03E960B
-:103980000F457D79959AEEC5F304A77F5B84C9F74F
-:1039900091F51ACE1FB71A408F4D6520936CD02336
-:1039A00056E85FC1FEA79E0EEBEB69397B5958BF05
-:1039B000883F814F28BEC3463AEF931B6C8CBF29CA
-:1039C0001AA09F451504F5E5222DB5634BE0BDD245
-:1039D0003740D7E5D48B0EA42FF2678A158AEFF90A
-:1039E00084B73350BB97CAB1973AA430EC0BE6AF1B
-:1039F000376C35E5005F7BB53658CFCD12CAB1F9CB
-:103A00001D95051B6879C99E2B70FD132A185D2E24
-:103A10000939502F4EE5F2B1DE10D2A31DFE3389D5
-:103A2000C03E88F68FF67413FD28AD64241E40AEA8
-:103A3000ABE8211453A6F6D1D45E26570995E724A6
-:103A4000C66E12F21EE43889B303D5F41114FA8855
-:103A5000C93DA2A482DC1372F998DD97E8443B3E8D
-:103A60003F15D697AE27939BBB25C46B3369457D25
-:103A700022F4C0D0B85C8F9CD20699BE323C81CF74
-:103A80007C670EAEEB12D28BFA44E895B1E820DFEA
-:103A9000A9E1FB88D1E960BC53C1FE9A4E93F07551
-:103AA00074BCA66524DC3C853D6D53503F323D69B6
-:103AB000647A129EE6CBD097F1FA315E1FC6EBC155
-:103AC000543DD377629D853D933A8DD901539785B7
-:103AD000B4A408FC35DEEA94E461BB26F08ED1A8DC
-:103AE0005C09651FC905F99E50F9622AAD0FC8C46B
-:103AF0000B7C65A178E9A1EF3773FBB72795CDD78C
-:103B0000AD67F4AB937DA4D80AEB12C17D6F3499F5
-:103B1000D8811E053E37DBE87725F01DE3B7A1EF1E
-:103B20008DA4C31CF37DD52B26D43F175EB6850C20
-:103B3000688FF8B31DB4BF94DF1BD04E3DF78A0DDC
-:103B4000F5E939AE0F5DC2EF401E617E16BEAE4193
-:103B500052358E00ED4B33C6810814F659B383D924
-:103B60005923ED215E9F1399C3E8CA80FBCD0B8ECC
-:103B70008107A04CE121A07F6E71327E0FEC995637
-:103B8000FC43FA3EE0B37A18F6FDC540AF06EDF708
-:103B9000E718297D4DD72E8B3E48E7D19C69B58328
-:103BA0007EABCEFED7DFDD41CB1FEED11103ACF3F0
-:103BB000F6697349EED8F2B731A43B3E10C32F77B4
-:103BC000EF54979B7BD5E5409FBA7CBFD3E63A651F
-:103BD00041D9E1F982D2B5C1D07ABA87C26B78D522
-:103BE00080FA6886D3FF9013E4AD267A18F06CC88B
-:103BF000FE780AF83B02FD9F48F03450368A1431B3
-:103C0000FC035F5F30CDCFB68F82B761FC11A30696
-:103C1000F14CAD75F6443917E07CE2D27B3F3C4075
-:103C2000E7BF6896D9BE02DF786BCBCAC19E441845
-:103C30004960FD4D1FC2BE8BB66B84F53F3593B610
-:103C4000A37035AC67FAB0894412806F5BA8DD6958
-:103C5000A44BFC1BCE6F777744CBC3F47FBB9D3561
-:103C600013014EF92FB20FE8E351E837C64EDEEAF2
-:103C70006472FC4BFB993246F899B602FE9A8D03AA
-:103C8000FA4A3AFEF57FF90CE5FDE2A5AFE13E8286
-:103C9000CE633EB3AB4D0AC8A7C50F1EC0F762DFA7
-:103CA000762AD38AFBB6D7361858D9A1C7F2A9CD40
-:103CB0006C5FB9B8570AC13CA55917932A412F6CBC
-:103CC000D6D90D64245EE3F1F8C1A6B713C0EFF5B1
-:103CD00001221DF67B12B3C7ECAD09B87F505A1311
-:103CE000C0BE0CACBFF143908F8B376B3D602F9003
-:103CF0007D36F4CF2CDE7CC3C48556E8E7D3A44AD6
-:103D0000F0136DB9013C54D0CE17627E9EC8F5F415
-:103D1000BDBCE56A05F8F1D06606FF62877107D081
-:103D2000D1F57FD1227FC91AE2073BB95BEF9D082D
-:103D30007CAD6CDA3E1DD6E78399E91A6CBF4B2245
-:103D400076C08B63690ABC5F2CC93EE0E386F58DC3
-:103D5000B5B1764F9D93F9C72AB397A50C5891AF8B
-:103D6000E6803E6DDE4CF908C69FF5DEEFEE700D85
-:103D7000F395346BFD2D53A1FF67751EE0BB217BCE
-:103D800066D3B790BEE02F4CF1B598E3EBABF29958
-:103D9000C122F8A4B500E4EAE215AD05F651EC8CB9
-:103DA000213ED944F9723221A79D12F902FC9319E0
-:103DB0004ED5BE63AC7D9AB550837AC6E821DEED60
-:103DC000F4994AB7C9B01FB725C9586F4BD2237DA4
-:103DD000CB7FBA77E76FE8BC9E74FA2F80BECC2603
-:103DE000DE62D06B4AD45E45CD5A4035DA61641349
-:103DF000B3AF89CCFC85EB92C98E5531FB7353125E
-:103E0000DB4F5039F105F473EEDD3F1F06FCB6645D
-:103E10007D3C05EC85C0C5CFF4E05FB3F64B28DFF1
-:103E2000AD1E1F01BA09F4CF240B8A86E572C0C308
-:103E3000F446FCBCE624E9981C7545B19F4A97827C
-:103E4000E56E07417ADAB8D48CF6FE4657C80440CE
-:103E5000FFAD7C2BECA746EE0F346EFB85570B7441
-:103E60001E92ECE3A1AC30FE186C9817D2D2713ED2
-:103E7000DC9617C4F29E4A8F96D659B7FDE3CA5C0A
-:103E8000C0539FCE03EDAD9E810498DF87DB4E24A7
-:103E9000C0FC1AB66971DE0DA14F5216160DCB0982
-:103EA0009DC65F900476825DB2C2F8425E7CB8ED3A
-:103EB000D3940556E63F407D5A3A3A5ECCCECAC905
-:103EC000F0FDF5DF64EB726697210472F08C89F9DE
-:103ED000F745BB3336A6FFAE4B12FECDDE2CD03FEE
-:103EE000436579A206E4C4F7ED6CFE2E7D6F16F0F3
-:103EF000E54792BA9F252BB52444E552E34A8984CD
-:103F0000A8CC3FF3DC4B5920FF3FDCFE52565D0C42
-:103F10007CF1DF89E78D496A7F9AF0AFBAF4E10C52
-:103F200018AFCE63607ECC31FCABA23D59CFFCA470
-:103F300083946B810EC577830D662FD8BB83C4181D
-:103F400002975B5D3FF7D77ABDF92ED8D788EFE3AC
-:103F5000FA5F0DF444E192FA24F427588AA2289FCC
-:103F6000BFB4FC77D1F58C91FF749D8DB04ECDC65A
-:103F7000E8E17104E9430F78D3B75865D05729EDCC
-:103F80008CBEA2F76B709FE532274C81B8803EDD76
-:103F90006D05F9767D81B9439308EFB342D03E3386
-:103FA000BD10BF0B5631FA0FA610F4C3A5915609E8
-:103FB000FDB476E6E7CFA820F655B4F8B32466E75B
-:103FC000B88967BD360FD75FC23807C78BD00F409F
-:103FD00047202FCF4846A423A95F427B54ABE99DDD
-:103FE00007FD8E45572BC5BA72BA1A2AFF9DE8EA1B
-:103FF0004941C723E8CAAF205DB98DA3D315F72384
-:104000005F767B12F4C1BE3695E36B2D973FD1FBF3
-:104010008DC2AF2EC17C6B797FB5466B580B7AC4CD
-:10402000A3FB38D63FBC89DAC5B07F4A03BB9E3EAE
-:10403000C7B5CF5770DD486400FC0896AB8DA82F3C
-:104040001FD34472C08E499DD4BA1BE823755E51BC
-:10405000493BEE0B331CA01740D7A27F74E9341FF5
-:10406000B323581C283A538FFB9C96072B7DCC8E8C
-:10407000A8417E09AC3629A007A7F5E72C07FA0866
-:104080002C231E03D271CF8645E0CF9D6DF580AC09
-:1040900013F125B252CD779D128B53056F22180F65
-:1040A0001B8E330D6CF921E8FFC622F49B0CF98FAF
-:1040B000F309EA8DCB8D43D6AD3621DE45FC68D0C1
-:1040C00046117425FA91B13F9268647A68A47C40E5
-:1040D000FF734A05117FEBA19C2ECA3CDE23F85FDB
-:1040E000C4A36C45BE1CB0C82B9C39BF32439C0492
-:1040F000FC776CB31684FD00FA8D5919DDCA4F693F
-:104100002820E950FB9FABAA3362CABCFDD0F7C19F
-:104110005537575F8BFA77A81EC0A67A5994BD26EB
-:1041200005E255C3F532B5838D7D12FFBEE2E61B75
-:10413000A8AA1E94C4F87FEEF4821FD14454E3C5AC
-:10414000C227C7F5AFA3FD5B15DE3E38EE26E8EFCC
-:10415000A912517EA0D34BE15BAB53F78728E5DF73
-:1041600043418CF77F530EAF5A9D316C1F507BE15A
-:10417000CF4965C376C2A3EFD5765D49C7B2D83FB4
-:10418000D583FE15FA3EE092D00E89E7D70497F466
-:10419000D5EC6B65847D9DE062F6F5746049BA2FBD
-:1041A00041F91D58E62360DF52BBC4E942BBE4E39A
-:1041B000530768FDB9599F1F1EA740BB7BE6C1BED0
-:1041C0002A705146F91BD8A90D49946F8CFDCCAECD
-:1041D000A6FA1CE305827E96D839FD388204FC9746
-:1041E000DDFBA432A077425AB36EA36BF903973775
-:1041F00013C7E1FBCDF87997BB985F205058B5A164
-:1042000000FADF2611B01756151E4F5980FBA9631F
-:10421000290B63BE6BEC7B0AF1D9B853372A1ECB4E
-:10422000A9E104786C79F9452FC88D3321096542DD
-:10423000831CEA04BBB6A141031621290DCDBF039F
-:10424000E31F73F5643C9D5F06D777819DB706A792
-:10425000C2BCE9BF127DB5D1B708E5C4C6B9462BCB
-:10426000C6910AEBEE413CD8CD5EC0C3AAC2AA34C7
-:1042700018A765E6743BC64DA83D07F52D0F7E07D0
-:10428000FD4502AE557DBA1AB077CAA95DF70B0A93
-:1042900077A673468D87F2F538EDEEE2FBAC10574A
-:1042A0001F5D8EFFBF6446171D922FF8ED52F48FED
-:1042B00092587F67761FB31F6F71E955FEF15B5C03
-:1042C000CCAEBD36189906E4B25F1EB0805D1D20ED
-:1042D000DE4F605F4D7C56653BAE13935FAE360597
-:1042E000FD6646D7C0635742FDB532EE67883CF0A5
-:1042F0006318F75CA7CBB38A703E80F283452190A8
-:10430000C7FB5CFEEFC2FA96737BF5DCCB371683F6
-:104310007F51D85F9DCF99506F76DA94276B404ECE
-:10432000FE49667903C668641AED67C9E74E1CB793
-:10433000D314EA84F50FF668B1BEC9EA5F04F4DB72
-:1043400078EBFA299887600D15801ED5B9BA08D088
-:1043500031DDBEA01FC5E8F21188234F0BCE972593
-:10436000D0177176CD34F063E1BEC5857EDC2ACEF0
-:104370001FE329159C32222B747C91346CE7BCF925
-:10438000E7D932BC14F68FC6C8FCEED573CD04EC69
-:104390005CF248F4B006FCF8AE08017BB8B957C22D
-:1043A000719A0B5FD0C3FEE5EE5EC6DF01BEDFA0F3
-:1043B000F8CBC27894CBC2ED810E46672472781C8C
-:1043C000E0F979B69E84D076317E5742963379C033
-:1043D000FBD3F3F84333F737514D88F5AB5CC2CECE
-:1043E00058A18E5BF071D74911AF16F05A2CA9FC79
-:1043F000E4E2D9C3BF4F3C189D0EFC1BA5F4057E1B
-:10440000A70DD2CC7B5EA7F3DB5036C903A6989BE1
-:104410009293B604DE5352A4782FEDFB643AD00D8C
-:10442000A921C8AF2D7D95DA662B8BEB605E8CA53C
-:10443000B507EA53EF2A44FD0C719359F4FDB31C00
-:10444000AF6956E6C773AF08E6401C34F1A0EF9E93
-:10445000D761FC2BCCE8874DA56B6373E27325F81D
-:10446000BDDCA4F800E86777AD5202F088781FC47D
-:104470000B67160DE7E3383D92772B7DEE76399882
-:10448000DFCE406A005E781FB20EC71FC19F07E3F0
-:10449000427C0F9EE7D2C232FAFFC9C096EDB8EF58
-:1044A00037603E486DDF1BEF80FEAD35925E8CC7F6
-:1044B000C6D92DD589B7BE02F43F78F6D4968701C8
-:1044C000AEDBF67A30EF25CE1EB9FE9BCC3E3FB375
-:1044D000DDA2003F6CE5729BDA8FC827C15D6C3F9F
-:1044E000196F471E75A9F72743E5AFDD8E64F00508
-:1044F000B7B33C0B21DF037CFF37D8703E01F4D704
-:10450000BF0DC113970FB28DE783F48F9E0FF2E6B4
-:104510000E4B10E8E17CAF09FD92328F7B9DB545D3
-:104520001F002475380ECF01791B5872E6E71ACAAE
-:104530007F720F8B23C9128F33FD4A4B585CCC6BB3
-:1045400007FF8B805B764C777B8B403EB27937716F
-:10455000BF5193B34061F12E9637D494102E007B57
-:10456000EA55AE879ACC2C5E35E8D087615DA326EC
-:10457000FF1F5D18D762DF935F1A94D8B8564F8833
-:10458000D975270A35613D9D670FD807B06EAB59C5
-:104590007C6B289F60BFA1C7C0E290581EECCC4145
-:1045A00039592FE256FB993FAE9EC7A74ECC5AF41D
-:1045B0000CA45C7448AD35B03FBBB0AA12FDE80F47
-:1045C0003C39139FF52BD57EFF45E0A7CF1B8E23EB
-:1045D0000BFF7B1DF1E899BD3CEC47D450FB4559DE
-:1045E000295781BECC21F61520FF95205DADABE9A2
-:1045F000B3833EC168973412D83972A7CB0CEBFB5A
-:10460000688706F554B043E3857602CF39C9CC8F6D
-:10461000744D32F36BD0A50AC138E2D9A1E371071A
-:10462000DEDF72A209C35323B1E7A376B966347DF6
-:104630002DFAEBD0B51AC14F17CDD4A0DFFB82DE27
-:104640003B17FDC6CE020279541DB6D69535AC1E79
-:1046500079E78229EAC3FAEB64664812C509F233A6
-:104660003599E7CBC5E16D6197BA1C1F8F690CA91D
-:10467000CBF5C43F212D8FC50F62DFA72633F97517
-:1046800061550EC7B707F3E3C4FC976730BC6932C6
-:10469000D93337B36A2ED0412EC49773E0C9FCAB2F
-:1046A0007426087FEE752E09E9230EDE0E30DA80BF
-:1046B000BE3A593CF46F853F1EEECAE414AE1FBCEF
-:1046C0006E885FD6DBF5188FBE5C3F495DB25A0E2F
-:1046D0000D95BFFEFD2CDB27756A799E8D1DE5507B
-:1046E0009D9DCDE584E4D91186F7566A2FC03C3AEA
-:1046F000B525603F4CBBD58AF368D96F423F70F354
-:10470000B2812CD0E32D55030510B789C72F402B5C
-:104710000BF945DBD5B9E8FE03EC84D8763C5F4B5A
-:104720001D67F5FE20B90CF6392776BF01FA6AB786
-:1047300009F515FDBF0306F0B3BC9C83F6CC8736A4
-:104740007F1BB40B98C35B9ECD01BB85D94DCDFDBE
-:10475000861EB00BEB3A62E27CF09FD5EAB81F5997
-:10476000E944FF3BE956BF6FD814F7DD883860177E
-:10477000AEF33ABD7F22F03BD53B987F70B65183B4
-:104780007903F55ACF2290B7674D6A7BFCAC8DADAB
-:10479000D796A175F6A0BDB565CC75F614C03AD70D
-:1047A0006B883FB69F665867BABE4D7C9DCFBE787A
-:1047B0007501ACF3C7BBAF2E80755EA7EBF202DFCD
-:1047C000B439FC5B9369BF276FF0A13D25F2582FE8
-:1047D000971EF724ABFD2B43E5FF21FFCA58FA30A3
-:1047E0003C04875A1FBAF44A06C8833AA3E1BFD5EE
-:1047F0008BF037AA1FCF68407FC7FE3F7FBA66079E
-:10480000C8817E2DDA23A2BFFDB23F0FECA1FDEFE0
-:10481000B83D4169ECFE1BB95FD86D2441F0AB880F
-:104820007D80B027E3E5F15B7C3E1F257B6F00BBFD
-:10483000E6CBFA8D1BF83B63E85366E76E933CCCFE
-:104840006FDC8B7EE4967DF3EDE0273E1D627EE318
-:1048500096178BD16FDC187A2D0C7965A45FB2C3E3
-:10486000FEA371DBB104C80710FB5CBAAF3D938CAB
-:10487000F4A8DEEF9E0E9D4880FC010A7725E871C2
-:104880008B2BAA07BA6FA1FB3DC8236C91A387A10C
-:10489000DF1617C13C97D23EF5FE4FC47937FAF4C4
-:1048A000287737F64B2190D7297A7F4E06E8359244
-:1048B00061C77820E7B38BC9DED494B2D8F8BAF7D1
-:1048C000F3E4E4E17CB0810D8948BF033AE2B583AB
-:1048D0003CDB60E3F24C46F9F6C74D8E10CB0F631C
-:1048E000EDFF18627642A3C80B934958A6EBB56852
-:1048F000B6F75D586F90F7E138791F5B1671FBBB17
-:104900004918F552331918CA0F8B6D171FD78778BE
-:10491000B8AA1FD25AAC801FEC4EAB07E081F8B8A2
-:10492000BA3EC8F6EB941F96960CD3AF580741BF1A
-:104930002DDC0F1D6838FE08D06FA04FB2837DD7E5
-:10494000E461F4DB44F75B90471BCFEFA4579D373E
-:104950003A16FF97A6A8F5D150F9EFE45FBD3E45A2
-:10496000CDF762FEC26F3F34CF7E89F165DCBCE2D9
-:10497000F7A9F1FE76B1CFBC5C793827452D0F87BA
-:10498000CA7F67795837B42EF1F2501DCFF89BE5F6
-:10499000E1FF705CE3997D4F27C0BE03EC78D8A798
-:1049A000ACDCAE63F91314FDB1F1E2E95AAB97C583
-:1049B0004FB5A25E1D8757A6F3383CE3EBD75ED414
-:1049C000E2BA35F33871F33E9B079A365817639C69
-:1049D000363E7EBA84EC9E0E4B151F476D027ECE8E
-:1049E000BB743C75750A8B8F525872206F213E6FD5
-:1049F000EB35EBA749FE9875AF2AA21B8251E8DB85
-:104A000028078933E6FDC6146657BFC6F38BDC7AE8
-:104A1000768E60ADCDE285FD8C5BC3F29F7EE0F2C9
-:104A20006D82BC18A3C2F1FAF2ED4443F1F28CAEF0
-:104A300017E54AB0D9EA013928FC37A2FF8B3C5E62
-:104A400071D9FA3F8EDEF7FC0FD37B3C7EF68BF1FB
-:104A5000FED6B8DD7A8A1B155F10A4E323105FCA67
-:104A60001949BF63F533161D1F4DF11D496176FECF
-:104A700014CC57B84C3963298D9E003F11D963502F
-:104A8000C0AF097E12D48FABD3783EAAA77C26E6AE
-:104A900069B37325E21CCE5876E40743EBC3ECC838
-:104AA0000FC65C9F2F6747DEEEF07D087476B2D2AA
-:104AB0008BE7011EB551F8617FF89C61D4732EE23B
-:104AC0003CC6A5FC2D5FC4D1D517FF4B72D4923ADA
-:104AD000965DF975CBD1CF13C07F3A763F419EFFEB
-:104AE0001941BC45F749646B8C5F3B1061F97B1938
-:104AF0001C5EF1FE3FF8BEA121D59B994ADF7FFCE9
-:104B0000AED14812A99E2E6572B1C567C5B8424B99
-:104B10002FCB7F695946508EB780DFB408FC8933AC
-:104B200009D87D4F3AFD13208FEED1F7AC416D22AD
-:104B3000F8DB6711B0F3CEBDCBCA339CFEC99867D2
-:104B4000B76C00E318DDB3CE601E56F9179F3E52D6
-:104B5000538AF0A23FC165509F67B93D95C933F1B3
-:104B60009C3D846F2FFAF33F6E60F9DA0197D70E00
-:104B70007E09E10FB728118C2BB4EC61C65BB996A6
-:104B8000CD87FC3003E9A9654F6531F84D49AFA9E0
-:104B900018ECDDF2DF5B71DFF7F183E99827B1CF25
-:104BA000E5AF027CD84A4337817D9A4DC701BBF7F8
-:104BB000E3DD371503DC42FEAD03BF391D7F9D4D9C
-:104BC000ED1727469677BF644726EE339BACFE5A17
-:104BD00098FF3A138323B89D9F4FE1FEF278FE17AA
-:104BE0007C9FAAD5E038A9DF35629C5CC885753A00
-:104BF000E237E60DCB93129E671870F13CC7FE9921
-:104C00002C4F8597AD2E75BEE747C93794003C25DC
-:104C1000A9F2578B675947E40B94A4B27896EA5CE3
-:104C2000A2E522B3A773ED7AA427DB4AC2E254942B
-:104C30009EC0AEBF361A9906E7BCF2BBC3D7029E30
-:104C4000F75FD4209EE49947303E9328B1F1F256A5
-:104C50000F744E007F8CFDADEB6049952E7B15A047
-:104C6000F449A7EF8154E4FFD64218AFEA5F742CF1
-:104C7000BF729F05FD0CDD594D985F79EE3D83EACB
-:104C80007C4EFC334856603E656EDF6F314E60DB14
-:104C9000238D9A27FB44AA15F9A62518998E393633
-:104CA000D7BA50CECAFB7E1F04BB43EE944102919B
-:104CB0000E9D5703E7D382CB09FAF5C777DB35B0F2
-:104CC0005ED93C3F6670FF7F4EF1E3BE45C40542AE
-:104CD0002CBF4937F008ECC7E4E503DF0CC27AECDF
-:104CE00071685AC07FAA8BB6A0DF659F05FDACD95D
-:104CF0007D792BBE41CBD92BED18071B7CE5EE6CE3
-:104D0000CCE7A7F31C3FCA3C1F4A65F948F23E8B2B
-:104D100006F499FC04F1C0A8B223A50AE17E8A96A4
-:104D2000693FDF077A4A1E8E9B823F0AF45443AAEA
-:104D30007F07D0CDD0B9A4A566762E899FA7B52DC3
-:104D40007D6F179CF7D9C2FDB907F74F9E85FEBF4F
-:104D50004E598275B8E060F9952FA4B278E248FC0C
-:104D60001FC43CD6DC7DBF657A8DE202FA97758C54
-:104D70005EE44E570FF8195F49F063DEEE751D6172
-:104D80002DC6CDEC277F5CA3C4EC77D6333DD3B2E0
-:104D900093EDCFE3F73797D22FBF1E92334CBF0C62
-:104DA00095FF4E76CBEFE2F4CADFBC6F21EAFD5EE1
-:104DB000BCFD12BFBF1B618FC7F537961D23F25094
-:104DC000AA86C761F6B44DD84941559E4E95959F28
-:104DD0003B34AAFB5F9F64477A10793B29EDCA7286
-:104DE000C8DB8FFE88A0DF4EE415893CA26015CB9E
-:104DF000F7096A8C782ED14DBA307F681C094B12A6
-:104E0000FAD706F0FC6D2AE411D1EF4FA4E662FF59
-:104E10009B8967A516E5A62201FC26C83F4902B872
-:104E2000431B16C178B759713C13E49F24E13E033C
-:104E3000F939DDC7F256A735B0B8433AD5CF504E51
-:104E4000CF6774699AABC73C56915722F24F045E04
-:104E5000AA38BED3272CCA01B928F254D6993DE509
-:104E60006017C1396838BF1C6C34F3BC13D66F7738
-:104E7000632E9E4FFEB27929F17816F929FA447F04
-:104E8000A6BB6CE43967413731EB89706DDCC7EC48
-:104E9000FCAA063DCE63B07106FA2B071B3504EC65
-:104EA00081AA7E03A3C3B8F136CED59330F42B8705
-:104EB0004C204F053D5CCACEA5EB5B08FEE0836D40
-:104EC0003BF34E52DE3FD4D68BCF4193D4ABBD12D1
-:104ED000CFA1CE03C9F58DB4FC5AF91AC8B78966BB
-:104EE0004994846AD3AFFA964CF5C46072F47D2875
-:104EF000DFBEE17BAC3C3EBA45A2ED9BD33E62ED0A
-:104F00008136D3A9D85EFFEFB541EB57D07F7F261E
-:104F1000F1F91C35EE64F4EB3C12413F12D77FA54A
-:104F20004C3EBAAD7AB49FDC3C1F9554F3FC5488D8
-:104F3000F8D0727B5A31C6EFAD44D91381FA0C0315
-:104F4000B32708E387F6F1CC6F6DE4F4403284BFF9
-:104F50006A2008F2AE3DC781DF0FC9E73D8610F336
-:104F60009BB1F18FBE78059E4B1279B684D833671A
-:104F70005F81F936AAF25A133FA729DB33E1BC7BE4
-:104F8000BB8EDBC1BC7CC4E65F88F304BEA4F6DD47
-:104F9000D11B7E5004FC7476EF0FF341CEDDA8A741
-:104FA000FB8451E45A593A936B833AEB4A897EB7B2
-:104FB000C6E66F013A7CC7326F3A1C319A9B54A9FE
-:104FC0007700BCC1E7B480D7644E278ED90C3E472A
-:104FD000B54F823CD476131B37D92F7BF15C847F8D
-:104FE000B6741B85BB5D62F29B7E94887655A19258
-:104FF0000871C8267EEE55CBE58896CB917F6E1B57
-:10500000C897A9C1784DEF135AB0E77FCBE3E2BF51
-:10501000CD519F9FE87133B8C5739656B902E8CF5A
-:10502000A5AB3A524BE940ABF78470FD326D1837AF
-:105030003E602B770FD0EFA5EC1F95423E777BE6C5
-:105040008F4A21BEA7757ADCBE98728F9BD17F35BF
-:10505000B403BC595A4BC1EFFBB5F59748FB2BFA8B
-:10506000F2FD0DF56360703519A359706EFE59930A
-:105070007F3BACFF85F9C7302EFC40FAD1F721AF5A
-:10508000E3A88ED15D3093E7E393EE690994EE0EC9
-:10509000E739785E0A8BBF1E9EC0FCA8547EB1FC27
-:1050A000D18912E621D6CE66E7626F26918E01FA8B
-:1050B0003D3A5968FDF48A1CB47F6B799EC8F47739
-:1050C0007C09B07ED36F8FCA20F7C7B2E76E74EB4E
-:1050D0009481183EBE4951976F2E5497BFE5519762
-:1050E000BF5DF19709B16593D97B10E8F55589DF6C
-:1050F00047710DB1237FBAA420D85D935F4AE7E7DB
-:1051000089593EE54FF97EF1A50A82F5293B8D5B71
-:105110008D50CFFDEF5A5E3FD94D8CD94EC407EA72
-:10512000E9A8C4F3325D1893227BEFB1333F346DAD
-:10513000ABA7FDEC9DAF201FA75835E49BC0EBA5A6
-:1051400046B4C3045FB49B287D533C968F339A8149
-:10515000DEDB759EF5D097D66C50402F572618B1E0
-:105160006FED3FC8A8D7969B0CC44ECB071F376383
-:10517000B95C263EC823A120CE86E7519D27D40ADC
-:10518000F3A5ED60BEED0E1657D796EB51CFD37E4B
-:10519000715D0F3EA109119C7FA58CF9A61C66C10B
-:1051A0007774247CFF34E76BAD8684518EA5B37B86
-:1051B000390ED1FEA1DF83BFD2F6A0DFAE50B91306
-:1051C000EACF1B27E0B9A8C0D0792F5903C015DA60
-:1051D000B97CE867E7F2043F0BF942A55EBE2B8578
-:1051E000309014F80F053B05EC0482FB0011B7CC9E
-:1051F000348A7AD90BFDA60DB567E7E05278995647
-:1052000085352560A7BCF127A0C3B1E445611A9399
-:1052100013E229E4C516C3C3476AAF196D3D0AEF0F
-:10522000C7F20C9B9DADC7840CE04BAD794206E8FC
-:10523000CD768747F1C5940BE9766AAE13F045DB6E
-:10524000D1F2AD35C7F2E518FD5498C6E4006DE71C
-:105250004DA2F01E342919C0BFA38CDBCCC6B57C8F
-:10526000BDE3BAE9B8B4DD411B1D97B6DB663284F5
-:105270003509A38D5FA1C078971A97A21D913F832E
-:10528000AF03A59320F8C10EDA3448AF3378BEF2ED
-:10529000C164361E2954E7FFE49BE9F8985FA6CE67
-:1052A000F7B951DAD4017AFA6953C256A0CF373828
-:1052B000DD1CB6FC433ED8696FCC2B388472267156
-:1052C000790710D10CD28BF246C8C10B69C7CAA1AD
-:1052D0004CE5E18D6974DE0FE41E9D079D1F723C55
-:1052E0009D8FF6A5D95B935636127E419F026EA024
-:1052F00053E08B213A8D835FD01BB9A51713253757
-:10530000533B179EC2EE25A495E5C52B99C3F3A385
-:10531000443EDDD8CAE6D11844B86F74FC18F3E6F1
-:10532000EE18E7FF1EC035F7CA4FF0BE22E29E3FDF
-:1053300001F67714DE7969C9FF7BF0C6DBF997CAFD
-:105340000F1F8BCFC5F8D2AC9D981F1E986DC57CE2
-:10535000F1693C3F36D0A0C1B800DD0FE23EA28526
-:1053600018432097A772BB5C9C5B784562FED6E031
-:105370008B06457D3F517CDEB88279E9C1652CBF43
-:105380007CC87E6F56D07E1FD273FC9C44773193CD
-:10539000EDDDF728EAFB89E613F5FD440BED2171FD
-:1053A0006F8A94329CBFDFDD4390FEBB6DB9589F7E
-:1053B000AE65FA887C83E9A3EE1CA2BA1F699D3909
-:1053C0003411F394785EC146C83FF86FF20B7E9AB1
-:1053D00026A9FCC243E5AFC92FDCE6F0EF023A5B39
-:1053E00058E4CD92283DD6EB997F98D2EBA6088160
-:1053F00074C5D67CD8A7DD445ADFD2E421BDFE02B5
-:10540000E97532A5D73C15BDEE61FC1544212DE8A8
-:1054100075884E0BE3F300FDFB60DC6E47EFEF5B3E
-:10542000605FD36FF0B03C6896D7192F1F62E059C8
-:105430002033785C5A2DC2F33AF4130FCFE5F04DC8
-:105440002C9DA612C61F63F14FAA4C82B69261FE34
-:105450003199FD6FC1B8437CF408DBCF8E805B6B64
-:10546000457A9A73078B7F052CCC2E8038581A1DED
-:105470007F261F7F4EA7AFDA01ED664A0C0F61FA57
-:105480000F857F16AF9FD9DF8C7970B3AA75C7637C
-:10549000ED20212F45DC6D2E6F7FAB7DA60EF2D265
-:1054A00067D7AAE35D73EF64F1B639B3D5FDCC25B8
-:1054B000AB3FC17C4DD2AA03FCCDBD535DFF49DAA1
-:1054C000509C6C02C4C90E713FD020E513E0A3D7F5
-:1054D00093176FBA87D2F9849F149580DFF0869472
-:1054E000C66D4FD0F2B31B2761F9F594EF7EFF280C
-:1054F000D46F29C072355CE204FB56E043CA67856D
-:10550000E577CCC849007DC2FBBD87E07BB7D9DF1A
-:105510003D93B6734FC9C53CD66AEED7185CC8EA4E
-:105520006FBED2C65295EF52D05F5C6D66F7351DE7
-:10553000297EBB04F2AAAB7379B9E4D549503E2465
-:105540007D82F73A9C6BB6CAB00E2DE9CCCF3EB93E
-:10555000500A4FA478A976F2FE9BD9BC6A4B9E4BA9
-:10556000073EA9AE62FD4CF65476E6413BCD792C60
-:105570009F4B372600FE05BFE5F07D95B02B7D5C87
-:105580004EBCE43DD69144FBF519250F4CD1577123
-:105590008CDD4B6665E7037DDE1C19FCF4D3BC2C67
-:1055A000EFB6CAB83C0DE4E12D7E7D29CCCB6E2C44
-:1055B0003E0479118915956598A76D24B8BE94FEAF
-:1055C000C7A7033F5EFD495602109D554DFF82BEA1
-:1055D000660ABAAF56D337E5DBC9E9659796DF2A85
-:1055E000FA360DD3F758F63E85AB02E1FA865AAF8C
-:1055F0000D8D13C79FF1E38E2537E02F56FE0EC3A6
-:10560000D78B7C9801D98D79C0A75D824F6F023806
-:10561000F49A089E8FCA963C93F0807185C7887A69
-:105620002F8E5F057C99E0332F190917FCC9C26ED4
-:10563000657F2EF0A364F07AFA9D973887E1A2E3A4
-:10564000DF910E7AFC1106CF66A995C919BE2F11FC
-:10565000FE971631DF3EF57CCBCDEC1E0337F8CB41
-:105660003076523C6908EECB5807319F00D7E7B33C
-:105670008D3E9B9ECEED36473DD2CFED54A33A28CA
-:105680005EC274FF0F701ED404F7C17E6F21F162F9
-:10569000FC9CD247203DC66E12F0C6E3A9650CB94A
-:1056A0001A3F9F78FC0CAF5B240D9EE2FCE1D07C9E
-:1056B0002F739EF1F68A4BAFF65B3AB97FD139EC86
-:1056C0004F2C84FA5A62F6A03FD123E17EAF96DADE
-:1056D0001F20A76B6B08FA719C560DFA13851D32BB
-:1056E000169F5CFF4D26B76A9B083FF7C8E6174F29
-:1056F0008FA964E07E78D61A950D0B80FF1BACAAAB
-:105700007306B556168F784EC8113250067A7FA8A8
-:105710003C42EF0F94811C8ABF7FAEF622F37B3BA5
-:105720002F4AF8ACF51C2B03BDEFAC1928037956B2
-:1057300067F7FE14D655DC13198FCFBDE91A919780
-:105740007259741ACF47220E7AC4E67F393DC63F9C
-:1057500075568AA09F75B5CBCEE7E7CF017A76D88C
-:10576000732AC1EF34DBD8AA03BB38D1E13F90CE16
-:10577000E4E8175FC0E6179A523CDE56ED7F5866A4
-:10578000C3221EEEE578B881EBD9F39BB4B80FA91C
-:10579000F6163E0DA1A0C09B3A1242BEF5A27E14A1
-:1057A000F7C69DA7065518DA3F6F437DBBF857F53E
-:1057B00018279BB05E4394187D39316456DD7F32E3
-:1057C00079A75355BEA2375DD5FECABE5C557D7123
-:1057D0007892AAFEAA374B54E5B2C85455FBABDF0A
-:1057E000A95295AF1998A16ABF03F43DC5E3374E9E
-:1057F000CF52BDFF68E3F437213E7D5DF43BAAEF55
-:105800004F703F04097A238574FE0B04BD5EAC53D0
-:105810007D4FCD9AB0540E7CCFFE16AC6679F795CD
-:105820001463B1FD2DEC52DB13379028E62BB684C0
-:10583000244F9840DE9DBABEB1AF07F17AA97B0F25
-:1058400026B8E66BC05497C6513B632220825C0D9C
-:10585000798363F1FBA5D6BF80E47FA9F537B8D57E
-:10586000EB6F52D4EB6F2954AFBFCDA35EFFC40AD8
-:10587000F5FA3BBCEAF54FAA51AF7FB24FBDFEA986
-:1058800073D5EB9FE657AFFFB806F5BA67B6AAD750
-:105890003B7BA97A5D73824B54F5F17420E849C8CB
-:1058A000CFBC95F7AADB53A46862E842D0D9025F67
-:1058B00003E6638DEF7A48355E3C7D4C203C8FF4E7
-:1058C0002BD247E5386E7F72BAA07AA96A5C32DAC9
-:1058D0001937C073EE046EFFFB46B73384FC8AD5DC
-:1058E000EBB1FBE6B1E4DA087DC5F7D163EA2BD86A
-:1058F000479B86F7D163D1EFBB84EA591C7C35FA0C
-:10590000CFEEB033380E9A993DFF29545D43DBD179
-:10591000361514DE77613E74FC77CD93D10FF21DFE
-:10592000D2AB8371EF24117CCE23517CFA895D7553
-:10593000BE6501F1E9B95F6409E0A9C938500E7A82
-:10594000FFC2FCA3EF637CEE48D265DD07721CE268
-:105950003FE30939C5E5C9498803D1F23913F7276F
-:105960007A89E28AC1E729EEF7AC9B26A19E255AE7
-:1059700033E6B1D5DD2EA19EAAFB0FF66C1FC7F44E
-:10598000DA88E75281D72E6E1F303BA10F0EDD6201
-:10599000FC90F8AD688F7AECB0DEB43F1687F9471B
-:1059A000767FB1DBC8E0DC2511B9C289C70671DD9D
-:1059B00061FDE17C9BDBC8E0DBA52346C0EF64E230
-:1059C00047FBF031998A3CD6EF24D6EFD15CF01733
-:1059D0009ACD6F7EAB1AF2A9E5E072F4DF7F8FA853
-:1059E000FDF777B64AE8BFFF1E859B3EDD768F1B2D
-:1059F000F4B228EF02B8211E00EDE8FB5477AB04A7
-:105A0000FEB1AFADBF3D0FB1765FB2BFA17E0883DF
-:105A10000BFE603D857F3683D2B781D2CBB6EF11C6
-:105A2000F41FC6FB6BC769A90681FC311DBB97C07B
-:105A30002DAF67FBE2C31EBBCACF44740E38477A52
-:105A4000297B0EF2BE4FC59CD3A07434EAFDBA1F69
-:105A500065B07CA4F6B6C844884B9EE371D787DB5B
-:105A6000DEC4B256F6605E26DCF7E588F95EEFA28A
-:105A7000F531724EB6D2EF63E48DCEEAC3CB6B1E26
-:105A8000698B60BC53C7EF257B34E35EBB3FC6BF69
-:105A9000F2CE386E271983C49E42B8694FFF4E4F2D
-:105AA00023403F5ABB7C2A761F6D70D3FE62F5EE11
-:105AB000C564121B7F58D9F60EC2FD88E4F7436710
-:105AC000867C1236517C1B6438034DDF6FB811E5BC
-:105AD000AFDE76AF07EEA11A0B7F06B77C21567EAC
-:105AE0007E388EDFCFC5E5E7936DD1C9304E7BDBC5
-:105AF000800A6F5D6D17F1FD9A3652C4EA3FC47A91
-:105B00004D8D82F4738AD24204E27AF2800DFCC198
-:105B1000D43E26107FD6B98D186F30B818BCE4A2D9
-:105B20000BE9639E9DC1003EBF4C4A1FEF2FD5E19C
-:105B3000FEFABE4C2BB6BFEF37E30F7829DFEA2918
-:105B40001AB47FC37C86C761F8D373F94964BF0F69
-:105B5000E4803E5DC63885D33E0BD7F1CBF627F007
-:105B6000AE3711CC47D6675AD15EB85C38DD196ABA
-:105B7000BCC7E38FE209E5FF7D1C4FF73DC8FC93EE
-:105B8000F7DD4FF03C05594AFFCA87E96A1C978741
-:105B9000A9C487CFAE362A080DB05E46E29F40ED1D
-:105BA00011D28B8D4DE0A7827AAFEC80D48827AAE2
-:105BB0005D33E1B9A6E26417B0E3DA6B3F8BC01343
-:105BC0006211802F7B0309C155BC98AB40C777F8A1
-:105BD000593981D727CC65E5445E9FE863E54CEFF2
-:105BE0000B523500161747CBB43A6FCA0779BC8001
-:105BF000B073F1FC7E8DCD84CB0BAB736635D4DFF7
-:105C000049F09C8BA8FF09AF4FB31E5F99077A63D9
-:105C1000B6FAFB0D1C0FA9D6E35DD330DEA6AE1796
-:105C2000F1AC64EBF937F1FB2275FD53FC7B9BF57E
-:105C30007C641AD4E7ABC77F9CD75BAC2CEF8DCAD2
-:105C40007E767F03AF7F8CD79BA01EC62F64F55A4C
-:105C500071DF096FD7C9E118E2331E430C2633BF49
-:105C6000F2963623F2573CBFDD07F773950DF39B91
-:105C70007D2919F5DE86FB3298DC495006BCDE51E1
-:105C8000E4A2A877DA65CC37D0BAF5484F062B974F
-:105C9000279C1F87E489D4EA6144C6E4F4A5E89A06
-:105CA00012F005906B59F40FE83AE3FB1AE28F917A
-:105CB00073E94D66E28FE583054E5539E5CE74559F
-:105CC0007BD7EC5C55BDB57492AA9ECC76229FDC46
-:105CD000CBE9CB5C54A2AA17F765906DBC9D9DB52E
-:105CE000D3E54F55B53B5FA824028D9FBA49DCA38D
-:105CF000E631827CB8D7969B0AFCF8B3B60A444ECC
-:105D00003BE527F6B4F3A71B8C59FA5478B910CBAE
-:105D1000CF3B587E7F7B9B879573089EAF6F6FABA1
-:105D2000C1F22ECA9FF0FC699B179FDB6959A1CF76
-:105D30007FA4FD2BB49F1EDA3F949FA1FDC3733354
-:105D4000ED1F9E3FA1FD43FD06DA2F949FA670C173
-:105D5000F329DA0FBCFF31ED1FCA4FB4F9B0BCB65E
-:105D60006D2E961F6FF3E3F3B1B6067CDFD9D68AAA
-:105D7000E547DB96E2F3E1B6203EDBDB56627D2FA2
-:105D8000A793E7F979DCE72BD9BD03F1EBDF9F217E
-:105D900061BB2F9D9F534A157AB92A3FA73F03FC49
-:105DA00002BDEAFC54C01FC26162788C87E36806BA
-:105DB000B30F2791C8720B931F18071FDFE75961B4
-:105DC000A1FC35AE95AD7B4E5F14EBD31AD8784766
-:105DD000B99D405C419251CE8E9B43BB7352A4CA85
-:105DE000C2F207D00F43DC143FE5EC5A7246E621BD
-:105DF0000DC02557503D1E33AF217C39189C80B70C
-:105E0000D1E0FD578E376D692FBB5FA7A62B0C6CB9
-:105E100066F6B6E2FD3AC6B9BEB04C9F2E9F1FEFA4
-:105E2000E99874713ADD2452F976F19B44A1CF8C44
-:105E300026F5FE317D41896A7FA6BDB8862857D1F7
-:105E40007E8BD4FB3C73FEBDAAEF8C190FA9EAF53B
-:105E5000AE15AAFABABB731E71033EC7B1B89961F9
-:105E6000F5720221E485DD4F205CE64C368F73929B
-:105E7000C27E5F6037FF3D13BE7F79D6CEF1655C91
-:105E80008DFBF2090E562C480C6A400F7DFC8B44AA
-:105E9000947F3B9ED1A09F7E22096940DE4CA6E6FE
-:105EA00024D45F01378C6BF1AA262D948B89A285AF
-:105EB000F255248AFB3ABA7FD164D2F56BD1FA9FAE
-:105EC00031D1F2D94CFFB32CBF308CFABA80AF6716
-:105ED00081D8C7AD97E3FDDCC64CF437A9CF257652
-:105EE000F0FD4B8789F90D973BCA53C10E3E3746EB
-:105EF0003EA8CD7DE28D0514DFB6B463F814EF1F24
-:105F00005734A39ED7CFCB94BE5A5EF77AAA4FD40C
-:105F10007C9307F3385BFACF29E0766BC98F22FFB9
-:105F200074E8843C5312419E0D973D8924661E3BC4
-:105F3000DADEC9935121FA116F325F37315FF94FC1
-:105F40009576C84B2CE079D13BDBD2F2ABC70F7F03
-:105F5000EFE37450482235A05F0B8B349E1074E041
-:105F6000B5ABFC31A6FC2E2F9C0B934B8807C4F2DB
-:105F700044D285F729C87FD5623E9A7CF01AA25098
-:105F8000FBD86A0D9360D170BF84FB75BECFE5FC72
-:105F900067F66A9C8F9C25EC260FE874F299D51B56
-:105FA000013AFCAC5BC7D8F4B8BABED04A50EF2D6A
-:105FB0002AD4871409EECBEBC27B40E52D12C9C869
-:105FC0000138A6B9E7837EDF6B413AB6AC2FC79F95
-:105FD00030B859E3AF40FC0E287B35C2E8A2ED9AF9
-:105FE00027EBB7823D3901F06205BCDC915F0D43C0
-:105FF000E717221E17F2792FE4F3E8C81CC23F838B
-:106000008778BC701FEFA26EE18F52CFF3F1D2AA56
-:106010006FC3BDA2ED112DFF9922353E57E92253E2
-:10602000E64BC37051381766825C01B8AF820FD857
-:10603000FC9A9F91C8C61C946B35686F9469303F79
-:106040003D9E2E9B3299DC8F66D8D97DE4EE534875
-:10605000CFC3E5936F2C48C2FD33B35B6C32CB8F5B
-:10606000F47A9558BFF72AE15FE4E772CC1CDEA111
-:106070007B0527B1BC602B89AC87BCB4B1F6F52B8E
-:10608000327370DCE17D3DB55D203FA5CC88795C45
-:10609000AB443EA172549969634F385765E474FA72
-:1060A000A84D9DF7B39DCF6F3B5F8F41A3C87BF297
-:1060B000D616C79CF3A9EBAF473F9688D30E72FF65
-:1060C000E1A0591D576DE4A43078A8ABCA0CF1C10A
-:1060D0002E16A76DECBF99DD6BBBEFC7782F30EDA7
-:1060E00053017AA8E7EDEB57AAFD580B77FA915FB9
-:1060F000E3FD64F17E318A393DEC1FE3FD625B33E1
-:10610000F97EC2438A210E7B6275DE6133EC7772C1
-:10611000089E0F1FA77D01EFDDA6BB812EB84F970C
-:1061200014B1FBA3E2D7FF54961EF1B253ACEF7843
-:106130002BDAA53BCB981CD879E0FC2DE3693F2BEB
-:106140007324D5F98095393A5CA7B7297DC3B397F5
-:10615000909AD1EE293B94A9F96A72EF5AF5EFC1F2
-:1061600034F70D1CB62828FF5E03BA1F3CFC7942A9
-:1061700011F251147FBFC408C23099C10DE7B37644
-:106180006B3E99174B0F6F67CA58FF36A78B2F0DC1
-:1061900057B51AAEB3456FA5CC6070FD0EE4C6B915
-:1061A000F0F194587B46C0B57B8CDF03F8F0ABE28E
-:1061B000A942AD1F62F074FABFC3D36EFDE8F0FCD4
-:1061C00095C3F3B343EC5E9B91F55F519F75ABE1D3
-:1061D0003DFB7C640E88490AEF5F117FEE9329181E
-:1061E00013E6F8EB2DE5F459CAE58F07CF5091C0BF
-:1061F0007B57631E66AF4C926AA15CBE007FF72C92
-:1062000093EFC3021A3F9EBF21EF1946957FD764D3
-:1062100031BADE9D2E8D8A87D22C36CF0347EAB263
-:10622000C1BFF1D83B0602726133CFBF7ECCDE6BBB
-:10623000847BA6051EA15C429F017D741128BCC70A
-:106240004A3F332AD651C6D3B0F1D6C6F18D184F86
-:106250003CA76415327B553AA48573386BAF7D0B30
-:10626000EF7F5B5B2AA3ECFDD2F85F1D87FFF05B3D
-:1062700029B7307A999245E16B91FE90F06D5A0EF4
-:1062800048D17F2A827C15BD1FE71FA078EC91467C
-:10629000E2292D8BD18B989F98BF80DB76DD025C45
-:1062A00007DBBB06541AA5BCBDD017895CFFC1BC77
-:1062B000505F5C2BB3734C6532AEFBDA8AA978EE83
-:1062C0006C37CF17895EA31FF577441670BC3D76F7
-:1062D000F1B711B84739D8AFC3FB3F883CE0BE15D2
-:1062E000EE1FFF8D8CF789537AAA81FBCC0E1C39E7
-:1062F0009F00FBEBF9593A847B3E97878317B535AE
-:10630000781EECC867766D0CFDD76569B97D12897A
-:10631000C039AF3525EC3C8B95DB03D623271B001A
-:106320007E6BC543062986DE66651910AE35FA68B0
-:106330008A87F617D8A72561E6FFC17B1987CEB3F8
-:10634000DA191E5A4A0FA1BD60ED67F735D66529E7
-:106350004CCE52B8F7D2F7E6899FD9EBA1BE948E06
-:10636000973BFCBDCDCED6D35CC6EE4B5A7BED3F02
-:10637000DBE13EC844F81D47D8EFF2790AB89272C3
-:1063800035BCDF482417F8CB2E63BE5A6FF85E2366
-:10639000D8FB822FDECAD562BB47F93989472B0A61
-:1063A0004370AE4CD0B135DBFF4016CC8FF2C50B3D
-:1063B00068EF447CD3103FF662C833DF2545E632F0
-:1063C0003B446F073E2CD46854FC16E1EB269E54E8
-:1063D000FDA3DD733FA75DA1F73B424602E74DFEFB
-:1063E00078716622D8A71D19C2DEF31A015F9B25BA
-:1063F0005F620E8CF32F5ADC0F1E3872BC01C6EDA3
-:10640000A0F302BE7DF875EB6AB0533AEC5EE4533C
-:1064100031BEECD0F0F560FDECD67BDF047F64D4B8
-:10642000C1EECD3A38758611E89FB6D3403F7FA0C4
-:10643000FBF7F004E8A71AFD060BEDB3A6C3778BB4
-:1064400088FF11B06F17756B55F7833CCCE5C5C25B
-:106450008B16128ED92F2CACF80E9E6B5C78310106
-:10646000DF3FCCCFED3FCCCFBDEDE2F878993F5F79
-:10647000CFFA8AFB6F4F9CDE4AFEDD8E3AC6F7BB31
-:1064800060FD9AA5013DA8FA35533FC7F3647F68C4
-:10649000B393B02106DE11F34C22E1987187DA5DE7
-:1064A00034917052ECFA32FA1D9EAF15EBFFD0E634
-:1064B000463C8EDDFF38151E87FBCF53E17164FF2C
-:1064C0000558FF87B6C24BF43F798CFE7354F00F2A
-:1064D000F79B8FEFCF1DAC7BD642F9EE6078C5C637
-:1064E000574BE1F7F70CF87B1BA4AFB70ACFB9EE17
-:1064F00022780EFA81FD7F7A1FF2521FD8AAF7C0C8
-:106500001883BAE83CCF287A269FD88370EF9C780E
-:10651000BE9D9587EB1CFFDE2887EC90676A2C9464
-:10652000EDA0E78C24125A01FB975223CA3911DFE0
-:1065300012FDFE3453AB92B3E27EA1469E7FD86833
-:1065400061F1AF26ABFF2CACFF124D57CBCF681FCC
-:10655000A70B3BF07C3B210EDCD788F88E0CFBC5EB
-:106560003C707DF9089C0B9B97E3FF0CBEFB091563
-:106570002B10EFD15EB1CD0FF9798FF37DE4E3A657
-:1065800088DB13233F75D9F257B31BBAE2E8B7ECA7
-:10659000773BC28C7E75D940BFDAC8CFEB72E07C06
-:1065A000E300BF674E41FBB9AEF430DE475927FC2C
-:1065B000022BE3F356321D604F8B785402E41782AE
-:1065C000DDB086DD53586F61E5FA5F27E1B917BA90
-:1065D0001FB214819CD9AD65FE221E073BCF611E00
-:1065E00034AEC902FC0EF27C97F3FDAFE1BDA7E724
-:1065F000578E473AA8FFE50FF11EC3DDE94C9F0D0A
-:10660000EEB3A13EAB3778CAE15ECDDDE9CC6EEDED
-:1066100095C309253176ECA3195528A73F5E395E4D
-:10662000131B27199FCDE4C21AE1FF94A3E570CE96
-:10663000EAE3D2F03FA13EDD63C2DF1BD3ECFD53A2
-:1066400039DEBFBAC680BF6351B577E2BAB9B05F71
-:106650004C90311F5BB3D784F09C5DC5EE83836F94
-:1066600041EE35EF1D87BFCB566F8962DE64B3D92B
-:106670005300F1C1FABDDFC0DF9F38F1F8C42C90A0
-:1066800083C793952CBC6FFB718A743AEFE3FB26AA
-:10669000B0F79D57E3B96ADB1A8B7F34FF88D04B84
-:1066A000F1F7CDED4E2F3ED707F89968F4801C5EC8
-:1066B00038E45F67F707D6BF199DA524A0FF06F34E
-:1066C00017EAEDA7F0F71DEBBB8FDD49303EE9423D
-:1066D000FA15FBBCF871EBB9FEDAAD8FCE83DFD5CE
-:1066E000AB6FE7F8E7BFF759AF29C6DF9B14F85F38
-:1066F00013771FF3F738DEC5F3C41119EFB9A47689
-:106700004516F88F4EEC3720BD9D583319EF5710C2
-:10671000E3D55358ED944F8F3B9529B0BE0BB2157E
-:1067200036FF76B67F15EFE9F811F8BDCEE83E2DBD
-:10673000E6AF0DDAA30910C714ED4479683EFD5A9F
-:10674000FCBDB7DDE90770DD295D11A02BCD2F6DF4
-:10675000A8B703BF64BF1BF7712909829F34F88E65
-:1067600001F77B07F719D09E1E7C979DCF1F71EF15
-:106770009F359A05F7DC067E390EE5DA6066740B04
-:10678000B3BF4D78CFE4E051FFD53C5E9CC6EFD15E
-:106790004C03BBEFC23E5318EC3EFAC4B843906CB6
-:1067A00073E3FBFD16BC2F883ED9F924698F1B7F4C
-:1067B000378974F1EF23F8FD0359FE0920A71FC89C
-:1067C000A3FD5BE1FB93D8EE42AEFF4A8C591192D8
-:1067D000CEC74BC77E33FDD9F85EFACCCD7E0FA86D
-:1067E0008BD747B03E60F05F8DF3F8BD8DF48C32EF
-:1067F000CFAF7A5FE47DD949B88E026E8A67B42341
-:10680000E3F1D293CDF69F021FF17439B49E9780C5
-:106810000FFC3278BFC03EB68EAB26EA993CE99CAD
-:106820008CF632DE30149327B87CDF074897833A22
-:10683000EFD3A097A2477584DDC3482D03F05754CA
-:10684000B076F516E6F710709CE1E7071A3B591E83
-:10685000E199E73EC89A6F85F3F31FA8CECF0BFFEF
-:1068600021ED2401FC33568F925057C4EC762DC293
-:10687000C57E8F6E8D4EC1DF0B0C3E3E11FD122783
-:10688000F4CA5EBC0776D5151AA0276D3197BF4FA5
-:10689000B07989FBDDC43D6DF17819C866FAB2990B
-:1068A000F8EF823BFE8F132585074BF1BE4A74FF3C
-:1068B0006B20CD52F69A587E3BEA8591F742EA2F3B
-:1068C000F17B82FFBBE553B05665809F6002E8D53F
-:1068D000D376B67FC45B2240BF6BD93C3BE003B8A4
-:1068E000FF82F84E835EC45B25281E4E4BAC3E9E55
-:1068F000CE84BC1B810FA01BE817BEA37D7F9E9D8D
-:10690000C3F63F76273F9417D4435EAAD057014978
-:10691000D6C07D0F271D4A02D0E5C9CE3CE772C81C
-:10692000F7712829B1F676E010C17B0E1438FF7399
-:1069300035FC2E92770AF805773BD5FE8878785E8D
-:10694000A81C40FDF35F98C6C553008000000000FE
-:106950001F8B08000000000000FFB57D0B7854D5A8
-:10696000B5FF3E73662633794E1E8484409824E436
-:10697000018430090F4141074810156878092885BE
-:10698000930710421E88B6175BDB0C24205AB441D3
-:1069900051D18B76404154B4414141037700A55811
-:1069A0005163D5566DCB0D88BC1F31A897FFADAD97
-:1069B000FFF55BFB9C64CE90A8B5B7F93ED8D967CC
-:1069C000BFD75A7BEDF5DA3BDF7C433FD7096175D2
-:1069D0002B42F41022CE6D11629810A3DC82F34298
-:1069E000D885C811FCF38DCA89DB3A5C8885F88D9F
-:1069F000AAAAF9DAB59EC82BEB2D5C1FE375467782
-:106A0000F1BDF1B5FF50F228B3214C0887FE3D5D82
-:106A1000880F311E8D7BEA90DDA70C461A2EAC093B
-:106A20004254AC75FA451AA56F4ECCBA53E685426E
-:106A300075C76C5C99D84AE3966F2ACA1291B21F47
-:106A400041F3AAD0E7559EEACD52870AD1F6A8EACB
-:106A5000DA84F6EB559E8F6AF3B81EA5EF27D6DBD6
-:106A60005CCBA99F0A7D3E277A6BD1C5B994B70A42
-:106A7000ABBD80F2562DDA45FD2E78542DF677B158
-:106A80003EAAF781B5A00BF8604D893A7C32A81E6A
-:106A9000D66994E3BFF7687257D1FCC2E977CC633B
-:106AA000A3E2F7D1FC4EF4D1E6217FFC9330B18212
-:106AB000F2EADA45D1EEDC2BE17DC2A1457B720121
-:106AC0005FB91E039EA1E318F0BC0878C620BDBACA
-:106AD000C54BF0AB7D48F5A0CEBEE64BD180DF982C
-:106AE0003D4547AEC1F7B561228CDAEC3B9CFECE4A
-:106AF000AD348F8BAB55413D8AD23D198982C6DBBF
-:106B00006EF97C2EE073BF4DCC7A91D2D2B7A747F5
-:106B10005B28FD46A71FF5210927356A7AF47CAE6C
-:106B2000DF3EB998F2C7DC9EC482A07A3FD6E92C3A
-:106B3000145F656BFF168D712AD6D8785D065E2EC0
-:106B4000621D34BF8B8D11FEE504978BBDDBB85FF2
-:106B5000034F46BF15C083414F546FA5DBA58FE39C
-:106B6000B31747115CD3B4E19E2EE864C183342E81
-:106B7000FA5B1FE575E67DFF710D7874E09B962545
-:106B80000CFC038F4FA46DBC97BE59DEB30AD193A2
-:106B9000E0D0787DAA42DFCBF6840985FA2B53DA60
-:106BA0008E28099C77FB14AC7FF13C8C57F67198CA
-:106BB00005E5C7F75E9FC7F30AC12BC129B52B7A3C
-:106BC000BF98D696EA0982DFC53E6D7379BE067D11
-:106BD00074CE9BE751BB374C605F5C4C237C4676A0
-:106BE000C2B101F819C6F55D76A66F6F1EE0D7B188
-:106BF0005E57C87A5D21EBFD40307D0B8FC6EB29D7
-:106C0000FF24CC82EFE50FDC94E5A6718EDF3B8E8E
-:106C1000D7753CCE9B87FD753C95FACFBD729DE53F
-:106C20000FD03A73BF659D8D4EC657B7EB8C6B7B0B
-:106C3000427CCB3A37EA7468ACF333AB3BDA8AFA7E
-:106C4000BB55B19C8A6AFB14DF7F8DCCBB56D0D07C
-:106C5000B536490FB56B23FCC0D78566DB047F6E64
-:106C6000271FA0F1BE273D58981E8E8F753F3C020E
-:106C7000F4759FEAF2B9019721EFFC9CF2C7EF5738
-:106C80005D02F9B1127EC40F2CE00FC7538B27733E
-:106C90007EAFCDB582FAF9B4F16F7F04FD5CDC63A1
-:106CA000730B5E5FF1FDB390A7F982AF115C6EC606
-:106CB000B854CEEB57EF19D68872F1E86057A6BBEF
-:106CC0000BBE1402E78A35AA691FD201C1E3D53E83
-:106CD00090E2C63A0C381387CD9A3AA8131EC84FD3
-:106CE0001FD409975ABBD09AF8FB12FB944141FC80
-:106CF0000CF04997E744FF3CC9C7D2A283F673C89A
-:106D0000FC42F98F51CF48FFD2C157CCFC7851706B
-:106D10009EE05019925F1CC237AA42CAAB43CAB761
-:106D2000F7FA9CF940E8F813D3E4BE31E058AAC35F
-:106D300071BB45917CE43EC5BF897E2DB5BAED4B54
-:106D400069FE2F8E11F3D04F995538AEE57DD9CE1F
-:106D5000EB2BB58A86B0027CF7703D63DDD45F43D0
-:106D6000581CE5C3251FA27A13EC417983DF1AF37F
-:106D7000094F93F030D2C55B9D8DC783E059DD1478
-:106D80006BCAD7EE4A6E3CEEE8CC2FC62FC9F46F23
-:106D900022AD7E38E0227FAA77B51E8C20FA49B258
-:106DA00068E169D4EFC583FF1B9DEB66BC0F2F26FE
-:106DB000FC16A8E92F1DA6F5B6ED563D9BD0EF9B1E
-:106DC000F2FC115F5F7A781B7DAFD99B21EE75775E
-:106DD000AE3F148E17775D8A4EA7EF170ED9C30505
-:106DE000C901A5CDF163EDD1BCBFBA84BB5B87BB44
-:106DF000D1DF056B6BF494A07A17446BF4D4207A3E
-:106E000029DD75A94EE431FC7C6A101FFF744F8F99
-:106E1000B12A7D2FFB7DAFB1164AC7E9FDDE6F7346
-:106E20003FB986E6EDDB1DE6D94CF3BEF0E62C0B50
-:106E3000DA5F78B3424F7FEAE5F4B34F53317EB463
-:106E400045D2BB31DE8834294F95598E3E311AFC2C
-:106E5000FFD59E69F5699DE56596822CE0799BAD2D
-:106E60006D2EE67D4111AB95B8CE7EC6A5B9B9FDB4
-:106E700085DD279F007FF8F4FE3E05602B177667BF
-:106E8000E769547EE1E321592EEAF7C27DC91EF07D
-:106E9000856D36F74F99DEEE89F260DF1BFD619C50
-:106EA00025E87FF755C335A41FCBF9523E4F93E336
-:106EB000FA9482CE7EA32DEE5F8F02BFF8BDCDB3D4
-:106EC0009992A57FCFE8198BF5613F778187B2D57D
-:106ED00061C26DE2272B78DEA5C263871C84721124
-:106EE000445FE5A298BFCF6F347F5F407C02DF171D
-:106EF000AE377FAF108DAB5A697D8BFCE6EF82F623
-:106F00008F2F11FBDAF869E2F37EF1D66FC24CF5F0
-:106F1000844FE70F0EE6C7A5B41FC1C79E57FCFEFE
-:106F200015C0EF3D2AAF33745DCBD3D2781D8F44AB
-:106F3000FC636E6B105E8F59843589E07ACC2E1C11
-:106F40004905E847089CABBE3D61FECDD4E4DEFEBA
-:106F50005FA59632DF4BB2E03CB8C305CE47FDEDEE
-:106F600039998A7ECA5617795B83E677D1E67DE444
-:106F7000E79057DF237E4DF58E8DF5378EA5791D71
-:106F8000BB57F5D47731AF33249FF9E3091EF728B7
-:106F9000C23F84F2CF9C4C2D21BC9CDE7C32B534A8
-:106FA00098FE15312B981E8D9466C2EB82AC89F445
-:106FB00018AD05EB09ADD7895FF37C0D783A55B173
-:106FC000A42B7A7814744FE5397F5705E4CE9A3DA7
-:106FD000363FE83362E3170FDF0AFA6CB6B940DADE
-:106FE000B57B542FE474B15BF567E21C6BFE34BAD9
-:106FF00012E7CCEE212E3568DD740E17E37CB9B0B4
-:10700000EB5262592EF73319F244ED9E873CA0DF14
-:10701000EEE6F15C9AFAAFF13FAF99FF9DCFFD200C
-:10702000F146F0818D27B2C0DF890F3E9786FD992A
-:10703000F5B51D79215A8783FE687E2CBF5FF47FEA
-:10704000C5F2A5A359F5FABBC0C39E343BC3FF07E5
-:10705000CF6F02CD2FB1737E349F3DE0CBC63C6B2A
-:10706000DC6D769CB3171DD179E0A7B4A089F989AE
-:10707000FAF9E4067F2D9B2888BF16EE9EBFC20951
-:1070800079A151F1400F286F56F9DC2ADFA0FADD13
-:107090008497C2ECBBF63B219F3E44E5D474BC3AD6
-:1070A000EA8FB3A8FEC2FB54CEEFDBF8D33FDA8001
-:1070B000D70D3611063C86476FD2C7637968913E7B
-:1070C000BF45CD379D56A0B7EC513D01B4DF1CE55F
-:1070D000C1F7B2D5B663C1F4351FBF507FF3D72BCC
-:1070E000FE401AF884B9FCC2309FCE2742BE6F5CC6
-:1070F00035757F02522BEB898BFCE672FCBC4EF39C
-:10710000A9D57FDF9AB9A617F073C129440BF6AB56
-:10711000B595F51D11684D051E2FECFE2C1578ACAC
-:107120007DF57FB24417F8EBD84FCD510927228463
-:10713000384BE7C63716D0FDA5C9C55DD47FB18FE2
-:10714000DC175B6DBE5E9063F76FFC8AF9C1C5DD2D
-:107150005A5F5717F4DBB95F7D4E4B12D280532034
-:107160001DDAE4BA11FB84E4C17B411F9B564DDD5F
-:107170004479E76B364842A2363392F70BF6C7FCE8
-:10718000A07E8D7DB2157C01E930C91F5EEC23E540
-:1071900084D5BABCB0755FFBE4CC2EE6B33ACD26FD
-:1071A000CFDB3E926FCC4D2B0E4F879C61F1450398
-:1071B0001FC2EB7527107C159DBEEA972D51F03D3F
-:1071C000493472DA5B3471FAB8105A24EA0B8F0B27
-:1071D0007016A24F2CE0C77B9ED7AB31DFFC898EA7
-:1071E0003BF06AD0832F56F837D3EFEA46875063D7
-:1071F00020EDB546A351D4A0A9BFEE4BE5B60F5480
-:10720000D69FD43E063E3D2EE0F7CBC8E931C1F80B
-:10721000DB77B87402FAABDE497A2EF5777E874DBC
-:1072200004A0575969BF503DDBE12FEC69E04BCD1D
-:107230008A80BC5C4B797CAF1D65F5FA83E0929740
-:107240002EE1919A9EC570BB60F51E9A08FA73955F
-:10725000DA21D7DB0E974FC079634B2AB5635EFB0B
-:107260000E8F75A4016FB156DE37AB9A8D715B5CE2
-:10727000E83F2AF6039E6F43AE454453BB868FC258
-:10728000FC0C4C87E443613A5C1B02850E7717F8CF
-:10729000F189C2143182CA77A81330CFF3AE5217E6
-:1072A000F0688B957687309B7702F49AB0D8B878DF
-:1072B000CC6F447A06CFFFABD8253CCFAF48BC801B
-:1072C000BE41F27A31F20DBDCB55867DE323BC8FF2
-:1072D0006B1D72FCA83D2A9FA362A443E7DBEFBBB2
-:1072E000CA689CC8BEDA24D083319FA861AF0BF076
-:1072F000E71C8B85E5B3863722D7802F18E51BD294
-:1073000025BD19F858996075817F3CAED3E74A577F
-:10731000B1A320689DB61E161D5EC50EC069BBBD1B
-:10732000F810CE9736FA8E73737FD25407F414AAEE
-:1073300067413F27EA68C764A3DFE90EC07741428F
-:10734000E978B45B2896ACC27E5BB85E1581203EBE
-:10735000DB6093E32EB81C2102433AC75D40F8E39B
-:10736000F697A3F97B8353D66B8892FBE7CE7429FB
-:107370002FAED4D3B57AFA83F9BAC7CCD7CFC7FE2C
-:10738000714BA9E4EF77A653BFD54AEB788826ABBB
-:1073900092DAED80EF893A97088405CDF78A75C6B1
-:1073A0008B40D0381DF52E3B45203E181F6EC6473A
-:1073B000E77A23B9FC445D12C3B1FBFE534C70EC79
-:1073C000EC3FC304C72BFBCFE2F2137539DFD1FFCB
-:1073D000C06EFA4F33CDBFB3DF7EFC5DECD2FA82D4
-:1073E000BFDCED227EC074D3CA7626BBA2FD067632
-:1073F0002FF1719880DCF79553CB7605F1876DE915
-:10740000765D9F0BA480DFFAC43A4E6B775D1A8FCE
-:10741000F66EE20B6CE7D0CB6B451BCF13FC02FA88
-:10742000BD48B6BAB97C97960DBDC89847873CF35E
-:10743000BB489F85F641D89EBF47631F5FB4B64DDA
-:10744000867DAAA9598D08DED707F4FD31B6CF177E
-:1074500079B0D7D5A01DF1BD9FEE5D9C0DF8D48409
-:10746000B5E561DEFBF7FE2D0FE7C8577B16F7C5C4
-:10747000F7AD549FE50F7B5B8D27A8BF7EC2E5B3B8
-:107480008CE84C9BF5FD1FFA7DEB9EFA5E98C736A3
-:10749000D83D482EAC59F656C6F178B021EF83E0BE
-:1074A0005F82F816EB43BBA6A96320DF7D48320F4D
-:1074B000E587EE9672C3D03EC26F4983DCF7E12CBC
-:1074C000F0899A61761754E1F0FC1696B7C38739B4
-:1074D0005C389F9FED93C1EBB3434EC840FBA2784D
-:1074E000A6E754F1AFC96D1B42F64FE00F35DB68DC
-:1074F000BC6AB575F23885F7D131F0A99AB7BF7873
-:1075000047D75F13819F5A8C4BF0785FEF27214359
-:107510003B897A9AA3F5BEABA8DE8C9B9353A11F3F
-:1075200095E8FA9998484019C9FC6810EC20579ED4
-:10753000DB520F7A4DD134C0C197ECF0E0FC1A98C1
-:10754000221CC971D8D0FEF4A934EE57E916C32E17
-:10755000AA60DE03F4353DDFAB69692C9F93FE38EA
-:10756000D0D13F3BAE25C3FB77F00BA3FE8737DFBF
-:107570003A48EBE2DC30E479BBBDE936CCB3AD3A56
-:1075800092F54798F3D0EEC99BC3022AEC8AB6C89D
-:10759000D5D0E73F8A987BB007C1E3FE282D228330
-:1075A000DACD9A79C32AE495FDF1EEA5A0E792D64B
-:1075B000E1C0E7D34E2D2683C6AF72687D1369897B
-:1075C000E7FB68D93138E48BE3259E44F1A0E22E35
-:1075D000E72FE753A2C8F10F476949E8A7C4D2F2E1
-:1075E000C455F8666D617B8368E8C1FD9CB78B8AE2
-:1075F000AEE47F030E47F475ECB3896B2FD3FAF634
-:10760000AD8DF1D4D37CCBEF9E39B796D2F996E20B
-:10761000C4806A9A7716D655E52BE99B4CF2F3792C
-:107620009B3EEF65FABCADAEACE0FD1C3AEF7A4391
-:107630005EF985C2FA20FF50FE155FACFF5ECA8777
-:10764000592E7D300DE7D6200BDB493684D3DE2260
-:107650003DF25D7D9E8FD3BE73C4F1F7D5F89E14C5
-:107660002EDB273D6CF1C37E503C7637E3E9C99AA7
-:10767000488F4A639508B71D725099F0B25CFCD9E7
-:1076800098BFED69A575156668D7016EF3E22DA95F
-:107690001FF03CB48153206F8D92EBF8167993D78D
-:1076A0003155B86C2C94893516C81F535D7229F377
-:1076B00015B93FA609AF0DE3CD101AD7FBC305BB23
-:1076C00017FAC41FA00BD1BC670A1F7F9F2DFC9C1B
-:1076D000DE2A025CFFC7A295F306BC893EE6254878
-:1076E000FA38D95365F8DF8C79BF1791D76719AD90
-:1076F00063CA23D999AC5FADEBC1F0F9AE794FD134
-:10770000E986F6EF3CF483FD3B9DFA997A63C8FE67
-:107710002DEC61E033F3DBF6514B7B87FE14994C83
-:1077200070B85E47E9F5DEC5AC3F15A991C247F8D0
-:107730006919A5FA21771CF22E4F48A075DCFDB916
-:10774000D4837EB75CBC3D84CA7F374615F5DCD256
-:10775000CBF2D464BD9FC9BDC79F869DF5B00824F8
-:107760000CA5B9175DD65E8FA1F94E56B735C45238
-:10777000F984DEA4C704F1BD1B12B65BA1D7DDD826
-:10778000CFFC7D62AE59DF99241A55C079F250734F
-:10779000BD7D800FD1D78A0CA9B788016280EEDF4A
-:1077A00063B9FB477A1FED132FD9E10B793543BB42
-:1077B00007705C3AE9B3B9185758E57A6ADE51D9CF
-:1077C0009E778CE42C2F9DDFC7EBE8840893F208AA
-:1077D000F2A7486E407AA6CECDE9393AE7517EA1AC
-:1077E000CE23EB67143F807D56BAFA732BF072B745
-:1077F00053C2F96E67AA1F76B58AA6C6F1985EE5F0
-:10780000AEA68348CB03C5E371CC2E38B4E420D2B6
-:10781000BB3BF4B6250EDD5FC0F3BF5DA7D3DBA392
-:10782000A6DE3488F6C9EDBBA5DFEBF63E53A74DC7
-:107830004A40DEC6F9EEE8A8FAB22234DA22CFA82E
-:10784000DECD58B7B7F9E8C1785AE7C9BA113CFF9D
-:10785000D3755E9EFFD9BA099CFE3DA3F839AE27C9
-:107860003E67796CD2B6A3D614AA5FE455BCD8B7EC
-:10787000D77A85DF4F74B1DE26CF81F5740E601F95
-:107880008F1934F5F13B30E90C6D27DACFB871511F
-:1078900011C6993CA2C48A7A33BF16223EAD934EDC
-:1078A000BF8BEE8DF557EBF83BBF5761789EDF1B22
-:1078B000CBF06CDF911103F960E9CE8C9E48896FA3
-:1078C0001A7A6F04E0D77ED9C2F36DFF289CF58E3B
-:1078D000D0F64B770EEC897A6709DF2248DE3CFB55
-:1078E000FC7FB883CF95B3714D5F7D02FEF657C91B
-:1078F000DF48B239F118F85FEF5E1ED0CB055DCEE0
-:10790000263D2302E75F8D6E57047F42FE6CB8B4BC
-:10791000E70E7F21652CF617C673139CC31C19B99B
-:10792000C787707F477E46FDBDFC589207FAEFB9C6
-:10793000ED8FA463FCAD4DF33F798CFA3FEFB7F8C0
-:107940006C744E9D174D175E051F7E2A92ED7B7756
-:107950002B342F9CC39B7B713E47B1862FC3392CA0
-:10796000FCBCCF7314B77519F1ADAA171FED057ADA
-:107970007C8D603082CA5F5B1BC17CED359BE7C8A4
-:1079800032F4F7B8ECEFE9FBEF3CB60BE97DD50537
-:107990007752FA65461CE3A1FC814503D09ECE795F
-:1079A000914CFD3DF78A1280BF6AD0BA7D2B926957
-:1079B0007E83371CB5F4A234FF29A51EE9C03E37EB
-:1079C0001E82FDF96F196E6E3F645B9A9A826DD9C3
-:1079D000CBFFC9757CFE9BE582DC759F8FED253A58
-:1079E000E583014AD3998D34D7B0D48F0A348663A6
-:1079F00023AF6767F3B4F76F155807491E98778967
-:107A0000DDC3E791DFB711783EAFE57858BF2BF6BD
-:107A10003D0A7A3BAF257A703EBD4CFAFCD5A87F73
-:107A2000C4CAEB7CE5A9F7A261DF89213DD909BF72
-:107A3000487EDB78D4AFEEE316F087F579E2FA09F9
-:107A4000804FCD8E9D1BB99F2A8707FA6EC5CE4BFE
-:107A50000753202FDE203C99A0C71D32FFAB42AF59
-:107A600047A5A5566CFC52E65B8A395F4CDA27FCC9
-:107A7000FEA24CCA498FE8E7A068CD637EC924EE18
-:107A8000EEC4D7AFA818E5EBD37CC9B06F1BE727CE
-:107A90009D7BA9FDB065ECB27DCBD85B53192EDF81
-:107AA000F3DCB3EBE797D1DF2376E173523F30DFAE
-:107AB000C09EBEC12ECFEBCDC467402FC6794DE32B
-:107AC000E6F593EDBDE0AF29AA326807C123E59141
-:107AD000309637BEEFF8B36256F1F96DC85BB5E189
-:107AE000922FF2D941ED5F88D2AEEE370C76327923
-:107AF000DE0BAB3B17F2C8E351DE6BFAB1BCD59697
-:107B00008A35D0397A1DE653A392FC9511247F451E
-:107B1000C67DAF733410E52D42FBEF5B7F6C04CD67
-:107B2000330629F1EF68A486DE455A4897FC397D73
-:107B30005B13F8F34361923F470D61BE64AC33744D
-:107B40009C03C40734E23B6FD039A3113F181739A7
-:107B5000C6CA787DDD527590CEE522390208DA1A60
-:107B60003B94F3DE28826361A42AB42EF4472325D4
-:107B7000BCCDC73AC7274498EA1525C4DAB18FBFF0
-:107B8000EFFA551D4F6AB83CBFD47083BFBA137467
-:107B9000BF7DC8FAE57A6F770E63BE3A56F97EEB81
-:107BA0002EB215DF093C8F8BCCE773735CE4942312
-:107BB0009AE075D4E17BE87A43D7251CDF4F8EFA33
-:107BC00089227C16ECC7CFED6C776BB6B53EF75BC0
-:107BD000826BF3A25C0FEC472FD3BE70809F4EB533
-:107BE000B39CDB0CD992EA37F770715CCB6BBADFD0
-:107BF000DC375B6FEF147CBE34CFEEC57EF45E6184
-:107C00003410EC48F5D26FD26C5BF216CEEBE6E5A1
-:107C1000291E9A8150C1EF69CB7CE497FCBC5E09B8
-:107C2000DC0A7F81EF73BB40FD75B1FED5E9945F3F
-:107C3000F78B0C9ECF47A48FD762BC8A70E65BEBB4
-:107C400062BDC971049F97FFA1F279B22E9FF29194
-:107C5000CCD7D96EB36E8A37197EAD041D6FEB3663
-:107C6000CAF25EB093A23C4DB6FFC426EBDFA2D7AA
-:107C70004BD0F1FBB14EA7B4FF993F689323ACA062
-:107C8000FF77FB95BEC6FB467893E1177AAC3C9331
-:107C90006D98B754DE90C6F4A4DBD366E9FCDCE84B
-:107CA000170D1CC3214FCB9FD9F3373B41DF332A3C
-:107CB0009C47211F7E54B1220A7AFD0C4D0D842170
-:107CC000BE6A7A91B743AE4BC7B85E396EB9A11F91
-:107CD00006CA00DFBD6D0E712FCBFF8121C1FA9660
-:107CE00081E745FABEAD6E1AF360B07E5D6927FE8E
-:107CF0003318E5723F57456ABF077DD5EEBAE1C13B
-:107D000060BDFB54F94379BCEFF471CFD5791F3CCA
-:107D10009E09396F02A7C6B81DFA11F049FDF6D5C4
-:107D2000CF73DAEF3E0BF0DAE494FA92B5EDE38527
-:107D300094AF9F3580CFF709531D5ED8F5DA77846D
-:107D4000F961AFAD9F15EEC5BAEAF744F9615798EE
-:107D5000A7EF1BD2BBF8BB6FBB8DE9ADCAEE7F6648
-:107D60000BB5ABDADB9FE989E895ED96BE57236446
-:107D700079B4376DE55094F764FA79CDE68EE1F287
-:107D80003755C1E5E181AC5882779B533B8575132C
-:107D9000BDB2FDBCCA2EBF1FD1E912FA25FBFF966A
-:107DA0004471BF42CF6B3F8F677D4F58BDC9F39180
-:107DB000BF7D20AF47B3CB7D216AA47E78C425E781
-:107DC00075A4399EF785418F478AB7DC939580EF7C
-:107DD00024AFD2FCFEB24C0DC01F6ED09F32F5F224
-:107DE000DB5751BB4F5F55D96F33E7D78B0FE3FBA1
-:107DF0009C15D51339ADBC6B329FCBF51FA7EEA2F6
-:107E0000F284A9A7D8BF6BE07F4E95D99F9A98E9D5
-:107E1000553381DF5CFFF68354FFE1D9271600AFAD
-:107E2000C333354726ECDBF6D697FF4CF36D5DFE8A
-:107E300027D6A336446B11F87E71F7D35CBF66C5B5
-:107E4000FF2C807E50639574639CDBB53A3DBF91F7
-:107E5000A9C5A2FFAA15BF633D2222B745F2D7BB31
-:107E6000BE1F3F3AD3BCF96585DA2D0E6FAEE154E3
-:107E7000F5E7E1FC3BAB04A2950C862BEB75E75CC8
-:107E80008168E047B348B972F1D610BF315092A86B
-:107E9000DB8BA8DDE226558F57F4DB41A7A1F51750
-:107EA000D377AEF73DBF578A26F93D76D7FDD73059
-:107EB000FE4500FEAE33CF646E023D9CDFF9745682
-:107EC000B09F3634BD72BE72FDE7F47D738EBED8AE
-:107ED000406FDBC24CF6850BCF24EBF426E9E9C2F8
-:107EE00033D9ECE74ED4F7D905C5670947BB5F081E
-:107EF0008E67109EA6E11C97E36D1A0EB9FB619D7B
-:107F00002F2E8E6F1A0EBE67F041E168CA63BB4127
-:107F10004E531EF464837F8AE2A62CFEEE6FCA42A3
-:107F2000FB972DD20E63CCA7F2B9148E7BA2B5F0CD
-:107F3000FEAE7C6EE026E48D71EA9D92EFD43B2587
-:107F40007F095DB79629EDE8A44FE61EA7B3A43ECE
-:107F500096F4825CE49365DE29F30B3794D8E16FE5
-:107F6000AFB7C9BC6B7D89FD18E6F73569B5C44F5D
-:107F70007374BFC5027FA9DD0BFBFEFAE5E11C3F70
-:107F800031DB3ECF4B69F67ABB695C030FFDFDE642
-:107F9000EF8BF4F9F40D890BEAA5B6ED0BC339F6B6
-:107FA000A4E8328E6049A6B4E33EFB6C477C91AAFC
-:107FB000EBDBC26DD0A15BEA1B8CD78FED065EEFC9
-:107FC00048A1F92FD6E3A55EB648B8FA9E957CE3A2
-:107FD000E57C2D05E7D505C01DE75C2CE57321EF99
-:107FE00049BC1979035FA1F05DF1F18214D8959F26
-:107FF000C894F6C7507C2C8F1ADE13E5065CCFD4EC
-:108000001DCA00DC8D759DA8F37AE968EBB4BFAF9B
-:10801000CF77688C8F7C47307DD76F1D7288242086
-:10802000716EABD58325D45BFDF743BFA8DFAA36BD
-:10803000F904973B80977391FBDF41BD051B620BF1
-:10804000A00F18ED17AE2FF29607CD7BE056335EEA
-:10805000063599F3837799F35B71060DFBE7DBE552
-:1080600007CCF92187CCF9931FDC7133B64F85EA31
-:10807000BB5F85BEF3E7F187704E9F7AF99568E0A4
-:108080006BF15FCB0F428F0B8D67213C2AD0737C45
-:108090005B14A6972BE25ABAE14346DC06766230BF
-:1080A000DD540ADF416BDA95F5CF8AA69BBD4467A4
-:1080B00055CBDECF907AB3EC7764D35A3BE4CED085
-:1080C00071BBE33B22D2EBC63E2A1921CBAE5E3612
-:1080D0004E7C8AFED6BC371EF458F22B85E59B9267
-:1080E00097B25F07DD1CDD3EFB464E6F9EC0F03051
-:1080F000EC920B9B954014E55D2344877F1FF18B29
-:10810000A50D21F19F6B42E282D699CB17EEDAF7EB
-:10811000FF104750E17882E32EAE8C67F41F805E3B
-:1081200059794AB07DAAF2A96FC2CCE5725DF3F528
-:108130007518E7ADF05DCBF17B57CBAAE238FEA313
-:1081400073E9A84B3B8573CB3877AF5EB75195F297
-:10815000BCB784FDC891768E8BAC76884004CDEB9D
-:108160005094DDEBA2EF97D647B1BCB280E45CE857
-:108170008B940A27C74D7A62D0EEC4BB2ACB65D553
-:10818000F1121ED5BF51FCB01D57C3A88BFC933212
-:10819000BF4804D8BE0B3AF206AD03F80BCE8B46AF
-:1081A000A95F565903FB009F8E7368ABB95E15AD8E
-:1081B000F3A338C87BE6EF35A28DEBD7EEFA262C79
-:1081C000F87B903D9AF55E43FF5675F94AFD653898
-:1081D000CB4F74208483BE6CBADCBEEE1E92236843
-:1081E0007D2B0D7BF85A29DFDDB2519E63249F67FA
-:1081F000014EEBD6927C86EFA46F20CE442C0AF77A
-:108200004BF95EEA0BEB6667B15CF4F23F5E0A4045
-:108210001F697B4861BBD2BA7CD9EFBAFBFA7339CC
-:10822000F8A7C2E384B11CB66E8A51DE87F5914F80
-:1082300030C564C8F9FAF71E6EFEDE4BF566C13E26
-:10824000221E74B27DC490FB0DB9BE2E56CBC91A46
-:10825000D6B9FE75B16D51F0BB898AF8EF25B76CC0
-:10826000D6CFE3365A3FFC2AC795E283F08F19F543
-:108270004666C97365F858EF16BD1EFB5FCA2D53DD
-:10828000EEBD8EE655FEB0C50D7BA18107E1F5661A
-:10829000010EC7D73A0B4077C3C74A7BD9917CC937
-:1082A000E723860A8E371AABF73B36CB624A93C276
-:1082B000891EA99FE345D21E1F35B498ED9624135D
-:1082C000CCEB2A6E65B2DE4FB9BDF8F7A3BB984F71
-:1082D000075D144AF9FBF86DCA26392F2FC7270E00
-:1082E0007FC0C9F6CEE3FA3964E081E86818CB0FA5
-:1082F0003A5F8B0DA19BB5A0079C87A00725986EC0
-:10830000CC74718B22E12BEE93F2F7BA589937E8CF
-:1083100082F43FF1BFA09B22C1F0EF4E0F34D6DBB9
-:108320009D1E4874B00874D0512F840E84D53FEC44
-:10833000DBFC42A52362872B848214ABF021CE178D
-:108340006724C3EB1EAB1FB178BDAD122F7DAC927D
-:10835000EEE8B4F18517707D2FE27D4B1E5C28BCE2
-:1083600054BF2445B07DAD1FC9553171DC4E204549
-:10837000588E0ABB13A5685F1223FB2FE92938FE2C
-:108380008EFAF35AE274E6361CFE5EC17205DA47D5
-:1083900017707B9F45B6F75A29ED9B21F598B69546
-:1083A000611CBF5C72779F2CD0C9C4B1663A39A2F8
-:1083B000D39591DE94EDD68D759E24F083D286FE02
-:1083C0007CDED43B8BAB77029FCF47B0FC59B2EA3F
-:1083D000C79386617E2FC47B80C23393B7B33FA817
-:1083E000B461F64F3E84BEB4D5C9DF2BB2B5F559A2
-:1083F00090FF15F7DC9DF4A174C6017B12B5D79AE6
-:10840000A69C7F95D2C9BEEDEF409E983C5DE5FAF3
-:108410009385B43F8B0639CE24DFE7D624EA6FD2AA
-:108420002885C3698E3A5DA9B7C10FA4E3F7A92CCB
-:1084300045977FE43D8192557DB2D273E13F21C9DA
-:10844000B80B39FD53A3FE186503E4A5BEE3E4FEB3
-:1084500033EAA31FF47B3A4BCA55BFD5E162E40966
-:10846000AE5CBF7C75D8D18C68A4B64036A5E9FD5A
-:10847000C7BE84754E4C17E3D703EE77AA6213CFBD
-:10848000B7AD84F94254961BF4AB9142CDFAE3D6D2
-:10849000FECC278F8E693B7A37E58F6E1E24ED8CDC
-:1084A000BA7D61BE4BB07C70748CE4776D9B239871
-:1084B000FE8FB85AA3E2A43D8EED0D653A497CB615
-:1084C000ACFE7EF8B9CB22ED47717ECC7F681AC72F
-:1084D0002794AD530361B807B0C66C6FA88AD4DE89
-:1084E000C67E08B51B84DA074033A0A3F2350AD351
-:1084F00061DF7A8F3D99F99CE2C2FACA2303FD70CD
-:108500000E947B9C1CC77C85FDE06B82FB70D8B908
-:10851000050789B5676B9F004E258D25ACEF46E4B6
-:108520006ACCBFFAAA0417EC179DFE26C25E0BBEEA
-:10853000646D4DC6BEFC55969BF13031CE9515C984
-:1085400074EDE4FB11476DAE2CCCEFE84AA705E7CC
-:10855000EDC41592BE69DF39708FE11EAB08073F8D
-:10856000D89A25FB9DB3DC5ABC91F2BD1DC21A15E9
-:1085700007FACA67FA5ED85FFB2DE675EA17620450
-:10858000E489B2356BE5BC74FA10D696C2781AE766
-:10859000D4E6B402D8013AE4DBFE63DB01C70EBACD
-:1085A00098AE303DD07A0EC18E9CDEBFF432CAE95F
-:1085B000FB3ED0CBC4B1817E881B2F52AB38BEB6F8
-:1085C0003D4978E0776C176D2C8FB4933C02BE6701
-:1085D000F019839F105D781D899DF8DE5247532264
-:1085E0001EBEB5CEC1E9B3752E6125786FAB4BE2E7
-:1085F000FC0B756E4E9BEA72F8FB8B751ECEEFA8D6
-:108600001BC1F997EBBC9CDF553781D357EB8AF937
-:10861000BBC1AF083ECC970CBE63F02783BE0C3EB7
-:10862000154A577309CCB81741ED991F1A7C10EB06
-:10863000B01474F22703CFE94AB12F09FC50B4CE2D
-:1086400006FF2852CF3DFF0AC1B9BD2292ED22EDAF
-:1086500042F2C1F648079F07A976B10BF689FADB0B
-:10866000BC47EF0E3A876FAD508435888E7FBCC40F
-:1086700029AC41743C6F59AC293F67D9FB6FF4A416
-:10868000FEDF8DD172B3691E477E79E2F13FD1F7EB
-:10869000DFFCF24C26F04EF3D8FC08C6BD2B5C9FE5
-:1086A00047AB9CD75D769697FA864B7DAB6FB8D477
-:1086B000B7F0E3088ACF3DA2E3A3242DF69DA7B12E
-:1086C0006FECAE9B47C04EB452DE4BFA04F8A3F2F7
-:1086D000BFE8F82B5D16C6702D6DD0F76B70DC36D9
-:1086E000C1F558B260F94EF10A01BFD7B15FD803A6
-:1086F000242B88638AC3AF407622E56B0EEC98ABDF
-:108700007FF711E47665D92196B3354724C77F08F2
-:108710009FED5C707FCAB2835C4FB4F636C56F467E
-:108720000CF5DAC13740E3C05F69CE7E81FD2E1AB9
-:1087300015BE7F54AE7F2F5FAD98E2A26764ABF2A7
-:10874000DE459695D3F359423F471AF9BC32E89675
-:10875000F808C7619637E6DB1704F1E752FD7B594D
-:108760008EC514A7797F969DFB398FCD49FDDE9B81
-:10877000936E9FCFFCCFCDF7058CFAA53905AB6082
-:108780004F2E5D83A8A6CEF625D9567D5E2EA97FF5
-:1087900039E85C8BE2F8A22ECF07439E39855F470C
-:1087A000F2FC59EFAA7CE1B917E08FACFC73189F7B
-:1087B00053958375FB4AAE7FF8349683BC91CA709B
-:1087C000C8E112FF85CFFD351A715DB53BA4BD9799
-:1087D000D2A3486BEEAA60FB5E8D87F6491CF8AD0C
-:1087E000D9EFFFFA0B7FE6FB9D84B0143D6E98E352
-:1087F000D46A767CCAF16BB0C7F986727F1C5F1DA4
-:10880000DABE56F99AF557422CC3A768CF97893C30
-:108810008F9D9712C1E76AF7AC4CEC2A8E28B41FE3
-:1088200023CEC1B0FFD58A359FC3CF597BD7849360
-:1088300092DE65FFA1ED1ECA8E4A38315020C6EE89
-:108840002AB6935805C79F2CD5ED38EDFE4CF6633C
-:10885000772777D7AEA7462492B55BDD3188B3BEC4
-:1088600028C484AEF0F449B6946BCFD33E823FFB6C
-:10887000E23695E5CA8BDBA2783FD46C7BF020E230
-:10888000046B9E52D8ED582D5A38CEAF66872A1CFD
-:10889000C1E71DEC47F1DDCF73F173514B405F8BA6
-:1088A0009A14EF669A4FBBC31DD323683EAF80BEB8
-:1088B00088341787350D47FFC6FC9F077F0B92371B
-:1088C00017353FC8F18D54EF02CB37BF8DE0383CF0
-:1088D0003AC9DEC13CCF6E18C2FEF5454DDB6B5880
-:1088E0003ED816E182E9E98CCD7C0FE4803EDE8142
-:1088F0006C298F9CD5EDD1675F50591FC23CB12FB9
-:10890000CFE871B846BB37F5766F664BF9A7265BA3
-:10891000EE4FA3FEA2A6A3D1FDA8FEC95DEF73FA98
-:10892000BEBE6F1645B6F03DCF933B22F89EE0C920
-:108930001DFF39FE351AEF7CD3980425689F9DC82A
-:10894000B6C97DBA41C62FF32517D6139A783D676D
-:10895000B7A528AC2F03DEA4B79FDDF112DF4336A5
-:10896000E4EB1F1C2F384BB186DCA3183D08728D39
-:10897000A355BFD7D1A6DB63FE6FFAAFD1BF27598E
-:108980008AF571E43D0D61C46FB864BD2235B72727
-:10899000F6DDDCC1EE99B8972DDE927197A2B7FB98
-:1089A00011E87F73DF8D67BBCB529BBB27F25F1C47
-:1089B000268595E0337788CE57925A87C1BE7B349F
-:1089C0004DCA15863FAD6AB522BC04BF5E44673E02
-:1089D000E4FDAAD06007C949677C3D5661F1DA71B0
-:1089E0003E46D9992EEAB73B37C1BE75C42E7CEC02
-:1089F0007F7BD129FD27E9D20FF218F617A5557113
-:108A000081AC78D8F174BAA99A4AE541F453B529F2
-:108A1000900539EA9C5DDA2B510EFDA9AA40D6AB30
-:108A2000D7E914FDA0DFA369AE0B2CF7EE8C12D0B2
-:108A30003F2CAF4449BBC8D3CE4D6141E776BF1C44
-:108A40008B1177C7FE4ADF66393FCC0BF2FC227BE5
-:108A50006316E45D63DC45D18D3CDE397DBC45E1C8
-:108A60008DD29FA3C711A23E8F6F13EC776A7B262E
-:108A70008CE5E633C92D2F63FC33CFF4E7B887A329
-:108A800069FE05BBB8DCC9F1E795CF860530DFD3B9
-:108A9000CF44B15DEBB44DCA63A7A312591E3B147A
-:108AA000F5F05CF6633D15A6C02E745A11F62494B9
-:108AB0006FEEC1F24065DD32F6D754127B811C4B5C
-:108AC000E904C87FA737F7677BD1E93755BE5C411A
-:108AD000DF57E3BB261AE7FE8CF58008B6239E79A4
-:108AE000F66FFD83FD3B465AF994D93E66D083511B
-:108AF0005E9423F960518ED4536EC871715A1DD1A2
-:108B0000F4703AAF53F207C203EB81B41F1361EF65
-:108B10003FD2B43B5189049C0359FF09B86F95FAC1
-:108B2000D6996D36F65355BE12E5653BD4DD57F147
-:108B30007DC94A55CAE3951679DF50F9E556B6FF67
-:108B4000D43FE32C003C08DEACDFB66D56F571E493
-:108B5000B8A7B7F4917E8D809E7F7910FB3526C62D
-:108B600089795359CEDA9007B85E7A2A82E3FE6992
-:108B70001C2FE2342A7FF67309CF9805AC27D0C1A9
-:108B8000CDFCB94AE7CFD5775F1383FB10E25D9543
-:108B9000EF795CB27A7A82FF86C2EBD11C9D3FBF2F
-:108BA000FC38F3832ADA37880F5BACFB13173FAB33
-:108BB000B05CB978D5358F30DF7DC726702FE25C89
-:108BC000D383D1C1F8A8CF91FCB0B3BD87EB2FA65A
-:108BD000FAB2FD5BD13C9F2D360FE6138AC7EFDD5D
-:108BE000FE59F507B5AF6C22F922EFCAF55F122DD9
-:108BF0003FFD33F8CB3627FB5109FF7C3FEAACAD94
-:108C00006901D67FF67927F39DB3B172DF9FA4F394
-:108C1000D4978DF9DCF46BB6CBFC619AC039B4D033
-:108C20006FEED798D7EA1C9BA4B7784F0CFC44D5BD
-:108C3000840FF447F8F911B77FD7C6ED43D7B34097
-:108C40006FD7B14F9F8F60BA39DB4BE2E5EC0BD9A0
-:108C50007C9E1D8D95F44EF34D85DE743656A6B878
-:108C600099047AA874497A383BA689ED026795ED94
-:108C70009C1EB5C97695CB747F3BD15F12E807B4D3
-:108C800009BBAA634D0BE419F0F9E1059C06704F8E
-:108C90003BD48E0E3AC5F9D7AAEF33E31D05F6EBA8
-:108CA000B09FA789EFC76BBA3C59B5ED4A7F25F055
-:108CB00054B54D617FDA7F19FDD0AC130C3F00D164
-:108CC000E5629FC2EF222C6EB86D11FBD396ACBD4E
-:108CD00015746FAC63B17E6FFCA8A2F27C8E3A690A
-:108CE000FFE45E399E01DFDFE7281DEF75B88CF3E6
-:108CF0008BF6F03B396E4947946DA4FEAA1A943561
-:108D00003C4E9AA1E7CAF5197022B0D861E73BAA98
-:108D1000DFD3EE6EFDC63CBB9BCF319DCF1F4D9385
-:108D2000F793DBDE96F7CC2F7D3D2426EE5BE44106
-:108D3000BE6160F487B863D020F5F322F81CF635E5
-:108D4000ECEB34CFAC0D66FF4ECE53E6FC806DE607
-:108D50007CEE0E733EAFD99CF7BC6ECEFF09E30EDE
-:108D6000EB8413F46FC43542FF460AFDDB1D26F584
-:108D70006FE4A17F2385FE8DEFD0BF9187FE8D3CF0
-:108D8000F46FE4A17F2385FE8DEFEEFE124E55BAFF
-:108D9000BD1478E0B8BADD4E233E81F7CBC5D98942
-:108DA000CC478555EAA51717E5B2FCD8616F9AE262
-:108DB000607B93118F9518AD85F7471C80D2B22A3E
-:108DC000398DDBB11DBAF6556987AE2A7046C2EE01
-:108DD000D1BAF2E42A883DA7A3B418D4BF686BDBEC
-:108DE00002F8562F3BC07EFFD6E5EE77AF93F863CF
-:108DF000FB8B115F5582730F7C9BF4251977EE7105
-:108E000004DB5343FD44624D501EF2D33A733ED40B
-:108E10002F04BEE635EDAB46C6C76F6C6DC9E0FBEF
-:108E20009F3EE3E0FB699FEAF63B31CBC1F298211C
-:108E3000CF23CE1B70597A9FB209E795A77F1CC339
-:108E4000B9FD50A6E97E61685A767908CBF31DF921
-:108E5000358A05E3944F5FBE8FF56ACDCBE7D2ED3F
-:108E6000FADCB2D75B4CF3EEEF0F37D1D1C0AD7166
-:108E7000217ECC5EA6FA8377A587F8310798CAA72A
-:108E8000AD1962BE8F5F7C8DA9BCAFBD236ECFA133
-:108E9000FBB9E4FC5CB2CEA5C8025E6F68BD54C5E8
-:108EA000F327F86FC5DB524E2DA773C61BAFBF2B40
-:108EB00052007F9D7732E057D1648B859DAD4C3F4A
-:108EC00087C432F3B95C61153E575C27DD55B88421
-:108ED0003796DA7F696D4C653AFAE547A92A8168C9
-:108EE000D180963CE8AF8BDE7C7238E8AA5ADD98D8
-:108EF000EAA2F23B14FF165C203F13B73D712495A4
-:108F000027A95A497FC273AA2D70FF1CF0D1ED1911
-:108F100002EFA47CBAE6A5688E1FD4E92FD5E60A35
-:108F2000071D6C6C54594F81FD4C8DEBA4938D8DB6
-:108F3000F1E1D06B2AC6283EC8C7065C0CFA08854A
-:108F400007C9EFEFBA69BD970EC9F7948C752E75F6
-:108F5000C9FAA241B637DE0730D67B5CD7472B373C
-:108F6000BE91753B7D3FD77F5F9E1B7EDCBA5DBCAB
-:108F7000EEC5966D5B92297DC7A1DD85752D7D7B44
-:108F80005CF4481AE7CB6D32AEFDB3754F3EE1237A
-:108F90007E7A77E39376E80F9556BF9DDFCD7966AD
-:108FA000A31DF10ED76FDDC8DF176C2D617B8071BB
-:108FB000CFEE941197ADC3A362ACB2C145EB3CDEDA
-:108FC0005FCA8515E1329EA6481DF54602D6B55505
-:108FD000C9C7BAA6176FB7E3FD8187F57AA1FBA6CB
-:108FE000FDF0B4A21EB07B35291CC7D4DD3E99111B
-:108FF000E8CFFB64DAE5344EA75F1EC87ADE8782CD
-:10900000B42F9C23B921FAF56155DAF59A55F94E3A
-:10901000983D90300DF2C25EF96E45359D43230AAE
-:10902000A0B70B7135A5C5A354139DD7164698F666
-:10903000C12C11B4AFA8BF9B452F537EFAC40C536B
-:10904000FD99D30786F89D0B3ACB997F5D6D7A8F9A
-:10905000A6FA2E9F5B61BBC758F3774AEF623ABB13
-:10906000D1D4BE5A4C35BD47B3E8A9F718CE4465F4
-:1090700076C4E154E8F758666947F5EFADFC9D16F4
-:1090800062DAAF7D333C7F92E7A58DFD09863D7D99
-:10909000167ECFE8EABC0CEF881745BC30EC1D9A71
-:1090A000591E69613D55483C54EBF6A8EA1C698F8E
-:1090B000AAF6B5D8118F4DF0B7A610486A1A15B6A2
-:1090C00037527D474A9CCCDF85EF3BCCF752D0DF4F
-:1090D00065941F524BB0BF42CB6B68DD38176A6096
-:1090E00047623BD884936C0733C6D1FB37E834F42E
-:1090F0007D80D0FE060C7033FFAEDCBAFD602F829F
-:10910000CFB4E2D87CC49D54354DB195E45E496F2F
-:1091100006FFBF546161BF7EFBE1034C6FED155646
-:109120008F8C4BFF76B8D478A5DD35940E17D0BA66
-:10913000E07F5EB043F1F815590FF0E905FA0C81B4
-:109140004F4A177033E0D501BF90727E3F6E28E220
-:1091500026E47B0A57C025149EFA380B34C17227C7
-:10916000CDCBCFF30AE9578C08DD8FB7DBD9FFB041
-:1091700041112EE5BBE131F5B2B4E3F4CD90EB6FD4
-:10918000DBA97820BFDF7CD9CADF3BE8A758C6D966
-:109190004F9F68DEAF1DF4542CF7CF8CCB89DCEEEB
-:1091A000DF4557DF454F86FF26347EDDB847E61999
-:1091B000A0DFB71A26867DF34FC4E11BF24177E7A3
-:1091C0004CC739E4D2F11099DEE5F9BC342A9DE3AD
-:1091D000CC35DDBE68F0694D6F678C5B42E5EE789B
-:1091E000D07B6F7E67715543466AF0FB37DA4A1BC6
-:1091F000DB815397C7735AE27425E27C29592EDF2D
-:109200006939764FCF44F8298EADB4254CA4AE8F82
-:10921000DD3934550C42BE88D34FD786CD0AB6CF40
-:109220001BE92D03E4F9619CEFE72D87A367613FFC
-:10923000AEDC198D90A1C52BDF1FEEA273BED9A2A3
-:109240002D1AC0FEE08D7CCE0BD7C63CD8E70C397A
-:10925000A37265514FC80355FF38F004E4016DB99E
-:109260002D1172EAE90F5481D01A3AE758BE38E559
-:1092700094F47D6A7304DFAB3CA5082FFC518BD4BA
-:109280007D792ED379DB7C33C68F70D2B8C330AEF4
-:109290007F4B12C6F5F8B230AEB63C33A62BBB8B73
-:1092A00091D6AE97F2DF16C3CEACDBA321F7230F26
-:1092B000B95F644BB91F79C8FD4821F7E37B0DFC0A
-:1092C0000EF01BD7B7E5436FF58D15394BF81C8EA3
-:1092D000CC815C7FBB12EE013FBA5DF1F4E478848F
-:1092E0000F62E5F91B8257231DDD46B25910DD5E82
-:1092F00077D92182E3EBC68858537E9C23D954BF8B
-:10930000C895662ABF3EA9BFA9FC0677BE297F5330
-:10931000CE4853FD499E31A6FC8F46DC60AA3FC56E
-:109320003BC5949F3661B6A9FE8CE21253F9CC5925
-:109330008B4CE5B3B5DB4CF95B2BEE34D5FFF192EA
-:10934000E5A672AF7059710E36431F23B8EF853E04
-:1093500046E9ED6F674606E375D4384B97EF0C3559
-:109360000D90FA5674AEF739D025EE09810EFBE860
-:10937000F780F6E29C1906BF654091FA704B32E81F
-:1093800026B45E68F9A888FD97F09465FFE76E9FA4
-:1093900061253E31EAAAFD4332287FFBC0E619561B
-:1093A000E22FA3AED9FF523AE57FF1DC37B27CF071
-:1093B000FE4B285772F7CBFC34C122C8AF06CE9BB8
-:1093C000E1A3758CBA2E7D8D47DA53BA8C53355292
-:1093D000C001719D8003D200D127D2FD449F485F18
-:1093E00027FA2CB7097190E813E921D24BF1FDF768
-:1093F000A497223D4C7A29D277482F45DA427A2920
-:10940000D23FD4CDE2F4833A8DDBFDB1AE82D38F6F
-:10941000EA96F0F74FEA9671FA973A1F7FFF648059
-:10942000617F08B09DC6F08BD5C01F097BDE2EDBA7
-:10943000B960BFB1E295E7ABE1C7AC5F225A23B098
-:109440004F5BADB1271C9DFEC9EEF9AD559C08924E
-:10945000CB9CE1DECF06F0F8BD5DCCB7F5EF47C49D
-:10946000B43E0584A74FD3B5B3E007330ACA56C646
-:1094700010FFB8EEEB2536D0CB8796AEEFA3EFD535
-:10948000F9DBA703BD6DE8F75AFD5DA66B1D32AE93
-:10949000F05A6B6B3DDBDBBF146EC403ED33ECEFB6
-:1094A000F758F95EB1F285E0FCE804C1F9FA2F5BE8
-:1094B000380EF15A972789CF1D3D6FC40575F8FD09
-:1094C000F11314EF63F8E18D789FC22F5AC7413E24
-:1094D000181D69778785C40DC0DFBE2FEA8FC6BC13
-:1094E000F87D27C3BFFFD4972280F7F20C3FFEB56B
-:1094F0008E9634D81546DFE1F004C73319FE7AE5BD
-:109500008B1615E78911AF648C63CC3BCA4AFD15F5
-:1095100074C6235DEB6ACA475C467D7524F7D79312
-:10952000BEE3DD49AAE755B95D533EECC7A3AB22C4
-:109530003D42E98C13E8A9AF9BEAF13A0BBFD03862
-:109540004E62B41E27817E1CB29CDF011C9D104818
-:10955000C6FB9FA397D83DB0833E8EB8B382CEB8EA
-:1095600005D48F08DAC79827FAEDF715CD17F2BCA6
-:10957000D7CBF09DE692F429DC7A5E3FAF85632C71
-:10958000DBBB543D5F1CE6FA6B04D1CFAD19DA901A
-:1095900081D4DF1F948CCC7CD617327A60DF4F09E0
-:1095A0007947B00BFA1931F0FF847EBC12EFBD058C
-:1095B000DBE142E9C8C08F414F06DEBBA32B830E1F
-:1095C00082E2D018EF1D71657A7FA1F4D61D9D1936
-:1095D000F475AD43D201F08CF82083AE942F9AF845
-:1095E0001EEBE82A079F7F065D85D2C5957425E9A5
-:1095F000B4FE270EEEEF4ABAEAA407C0E587D355BA
-:109600008B8AF3F89FA5A7796D623CEEFF975C7695
-:109610001F44DAAB9FB6177CA64C8C190F12132E81
-:109620007510EC62A1F532BAA9174A7FA1ED6EBCA4
-:10963000A25D466E70BB71FA5919DAAE12ED7A046A
-:10964000B71BC271116FE9F708DE721A712D9E996E
-:1096500090530EB96DF22D2FE18DCC27BA19A7F3D7
-:10966000F34362099FBF24EEFA404F853A698DCBE0
-:109670005DC8FA426164D7710537EAEDC77F5DDCEA
-:1096800080F98C4F30CBE337EAF2FCF5A291FB0F67
-:109690007D47E1C6DCEB59CE0F7D4761F3403DFECF
-:1096A000204DA481DF170A8F9C9FFE0E46A1BECFDE
-:1096B0005374BAC970AB62541CEE9B6A561C32AF2D
-:1096C000E31D8C3C8CEBE3FC0DC2CFE94D22C0FDC9
-:1096D0004CA20309F91F096193EF5FC8FBBA35AAD1
-:1096E000F6DF90578D7BBA4F3BB557B0CF0F444C48
-:1096F0009E83774AC60D19D70FEDF617BA59CEDB00
-:10970000EFC860B913FBD216D7C927DEA473BA5FBE
-:10971000A6BC378A14F746FBD179FA3B3AC791BF0A
-:109720003167B940BBF16E73BC93D1FE26D7386167
-:109730008DEFFE9CBC296F776FD8CDDE8ACD2E04CD
-:109740007EDF8ABDAA10EB7D2BB6A745A661764EBB
-:1097500007BDD2AF2BB9D8A0FBCEF1C6F378DDC1DF
-:10976000D9806B283C0D38FF00B81EEB0AAE7B0792
-:10977000089637AA23245FAD8E907CD580737558E8
-:10978000C77DDE9EC1F127550E09AFF9CBAE11564C
-:1097900012F5172C1BC9F99375C207B89FC69260C2
-:1097A000100FB1F709EB58CE1BEFDC9D7DF8BDE83B
-:1097B000249AE72A87F63F98DFB98240164984E267
-:1097C000E4867ABE8F7FFE05D5037DAA4A75AFF188
-:1097D000C0CEFA962AEF717D7D2015FE58F154D740
-:1097E000F1E8550E095F439F1CD2AF98F7ADB15F0A
-:1097F00085FEBE80215FF50E93F1DCC63DF7EEE4F9
-:10980000ADE1E192AFF50E93FCD8C0EB06BB7EEE66
-:10981000533FC3898FA6FC3A9CF5AB98586F4C2EEA
-:10982000EC8385C2A49F187695F604F97ECAB5220A
-:10983000EB9151942F3C64137E2A6F074340799239
-:10984000F4B3B61FBAA482EF174529FC3E86716FA8
-:10985000292CC922DC417CC2E90E37BD4B1B911378
-:1098600067CA47797A99EAC78C483795C77A0798C3
-:10987000CAE3271498F23D8AAF36D5EF396BAC298D
-:109880009FACDD68AA9F5231D59437F8588AFC24E2
-:10989000FA2CB9C5D4BEEFB25253FD345FA5A95C12
-:1098A000C53B9B3140ABB7252711CF81CA9F8CD5D3
-:1098B0004B43DEE3B508CBF0CE776BFE335ADECBFD
-:1098C0009910B980DFAFC96CFC99799EEA446B2C82
-:1098D000A5D7BBCD7CB128C99C1F17B94F81DF71BB
-:1098E0009CCBCC9F5396584DF91FE5EAFC344FE4CE
-:1098F000B1DDE3BBF0AF0D30E13F144E440FFC7E11
-:10990000683B9DEF3ECCEBCD327E0F077E93E0753A
-:10991000C06F120C07F84D82F3F09B04D787DF2449
-:10992000B81C7E93E0F22187CCF81FD662C6FF55A3
-:109930001F99F16FD06577781AD96AA60FA1299A75
-:10994000F22D78BAE694997E42F1731D895BB109D4
-:10995000C087E209B87F38BE5686E08BF0C3F73780
-:10996000DB7B47317E1ED7D7756D6020DF972E3A9F
-:10997000A40ABC6F63ACF371FDDC3F6DD51A73892B
-:10998000CFFCCE5D90043E769D907EDBF155164F68
-:1099900080BA7F20649CD929DA43A83F2BFE52AAC3
-:1099A0001D74D226DFCF7B0E7C79D895F1B23E12A2
-:1099B0004FF8BEF6CF54BE2775C4D2A8808FAF8EA5
-:1099C000D19E009F9997BB84D79B248AB72F405C78
-:1099D000D47F85A5223FB7AFBCC72D725BF9FE8946
-:1099E000C127E7A6C8B8A92DB9BA7FDD23E3A79E92
-:1099F000C995727794C7C571DE25B9F27E0DA98B22
-:109A0000A97307013E879DD980CF3A0BBFEBD98A56
-:109A10007BE4099DF7C8210F43FEECA3CB7FF51F24
-:109A20003B1C5847F67A613A7FFBFB1DA6F8E281A2
-:109A30005B5DA6FCA0A62453FDC1BBDCA6F2FC40E6
-:109A40008EA97CC8218F293FAC6584A9FE551F795A
-:109A50004DF991AD134CF5AF39556CCAA788B6478F
-:109A600001DFBE8AB4531CCD4D97FAB95B70DCE4BC
-:109A7000DCBB63E57D5FDD7E61C8FB46DCB9A6D358
-:109A800075A81ED1D72EE5E8FA6421F54687AE1FEA
-:109A90000AB33EA1E971E31DF7587CE6B871235E75
-:109AA000BC43EFD0F58A8E7B349DF1E2DEE078F1A5
-:109AB000B9615DBF1F7D5EC77BE8FCFBDAE57AEB31
-:109AC000EFB4F3BD1D635EA1F349C99674BBD9D150
-:109AD000F5BDAABFE54AFB466B66F125D0FD1336FE
-:109AE0004F2BFF6D842BC6F3B4225EB7FE1776CFE3
-:109AF0000AF7778F3777B05CCF1C8B65DE945C8E6E
-:109B00008B33FDDD84884192BEAD8375FB4AC878F6
-:109B1000736364DC9A88B1BB41BFDD8F27E1996430
-:109B2000170D7CFF4BBF67F1E3354DF7A1688EBD84
-:109B3000517F3FCE6F033D4C1C4BF2593EC9135B26
-:109B40007A3D144972CA13CBAC6C9F8A7BFE57379F
-:109B5000FBFA75DE9FE94BFA10E803B20EF4A80792
-:109B6000F25429B70C92EB2B52BFEEB8E7C07E1827
-:109B700021F4F34370BC4F17F4C67468ACE3DF758F
-:109B8000EFC1A0DB503819FAAFD0E33BFB19F3D299
-:109B9000E167EC07037EC6FD13F76DB6E24D917CDD
-:109BA0008F6502E2E50CFC6DC993F6C6053A3C50A0
-:109BB0000FFCA8BB7A456A6E0CECF7EDC21DE3EA18
-:109BC000820E3BEAFF9BE062C0BFBBFB6DDDF1870D
-:109BD00050BEF05DF7DDBAA3D37FF6DE5B109F9039
-:109BE000F14B3A5EFCFD2C1C17707794793F3F32A5
-:109BF00048F2899183F4FDE423FDD6CC2F04FC0FB9
-:109C0000F52B559D5FC8F3BC24AD98DFAFC6F98A2C
-:109C1000FB5BF3374AF94788E2C4AB87C28F6FE337
-:109C2000FBCBD77A05DB6D4A1B153FDEF92AF175B0
-:109C3000AD0FB39FCFCD7207BF3BC8264D6A5746C5
-:109C4000EDF6A55DF9CEFAC248F9EE60E8FBEA0B45
-:109C500075BD192F6A60DF86FABDEE19A4FBB13C11
-:109C6000C2C3F29C1ED750A1D7E9A037BF7C6F0EAC
-:109C70007A32F631A51C1F67C0CD0D3FD490CE3C83
-:109C8000C1373C07E77983B5CBF8C50EF81A7EAB30
-:109C90000EBFEC61BE27111A8F71CE7720BA2B3F11
-:109CA00098E11FEB6E1F74F8C7BEC3EFD61E69891B
-:109CB000C6DFF169DF26DF67E9F45BFD65B8CB221B
-:109CC000FD5331F03FB5EAFD898D795DDD0FD59605
-:109CD000EFE43894668BB67310ADEF2CF58F777B7D
-:109CE000EF89DC9F88771126EA76A92BD7ADCBCDFB
-:109CF000A314E98FF6A98CEFF609F25E3DF15181CC
-:109D00007D67C44F4C118104A4861F4A5B3D92E1DC
-:109D10006FF8A14A0223799E33EA17DAF0E468EB80
-:109D2000A3771585BB3BFD53AD7D645C54777EAA5C
-:109D30006997F3B9BFE997AFE17E3E189426E5B67F
-:109D400086FB6E039D0DD82A6C5867ABADEBBF4BFD
-:109D500051A8F3AB12E89A3D82E2AD962BBC2F9648
-:109D60002AC288BF623E6FE42F35EAF92299BF7D8F
-:109D7000A5CCB7EAEFA76DD1ED20582752AC077AF2
-:109D8000F936DD4E827520C53AF01D7C0D79F0352F
-:109D9000E4C1D790075F430ABE86EFA5A2381576C7
-:109DA0005BF8D30A83F607FC6985417213FC69C12D
-:109DB00079F8D382EBC39F165C0E7F5A7039FC6929
-:109DC000C179F8D382EBC39F169C873F2DB83EFC28
-:109DD00069C179F8D382EBC39F165C0E7F5A703944
-:109DE000FC69C179F8D382EBC39F165C3E6F996220
-:109DF000F2B7CDD3DF7F285B1FCFF45198511C9B66
-:109E000047F8FDEF887FFCC4960E3C372F02DD2E0D
-:109E1000AD0EF7483C374E9078B70889E7B6D98C35
-:109E2000E7BBEC325F24E3B443E9077EAB429BF42B
-:109E30005B2185DF0A29FC5648E1B72ACC947E2BAA
-:109E4000A4F05BE13BFC5648E1B7420ABF1552F86B
-:109E5000AD90C26F85147E2BB483DF0A29FC56F8BF
-:109E60000EBF1552F8ADF0FD08CD03FE2B635E90DA
-:109E7000F3FB99F452A243935EEA32E521E707D758
-:109E8000879C1F5C0E393FB81C727E701E727E70FC
-:109E90007DC8F9C1F94983DCBCBF20EF07B783BC9B
-:109EA0001F9C1FD4E87B03B6AB491B2EBC8EB43578
-:109EB0004A7942710931352F7326FC8BAD4E253519
-:109EC000D623846DF980998594D7F438C73CD16640
-:109ED00001BE39AE80F0A60504C7650FFA7FC95CE4
-:109EE0006EF8B3F987F09EBF43B0DE50A3DFAF3505
-:109EF000DA7B844B456AD4EFCC775D2F747CA31E4C
-:109F0000F3CBA0799062998F7893FCBB220B70AF52
-:109F1000608B4591F1B82B643C74285DADCA93E722
-:109F2000FB16CBF6FDE1885329513CB8EF9165153E
-:109F3000876C0580D392027EF72A2F565FD792ABAB
-:109F4000118765CCDBB04B129FE07B86A3DA84BD22
-:109F50009CC619FD85B0E3EF734CB44B7902EDA0BC
-:109F60006F0EF429DE4D41F4BD2C4F9E7B9AEFB667
-:109F7000ABCBE9FBC06D4BAEC6FDC589E1B2DDD30D
-:109F8000BF8966384E6E50F89ECEA86DC28BFBC955
-:109F9000CB757E3A709BCB5ECEE3BAF8DEA3D16F71
-:109FA000C98654BEA759225A0B710F450C55F83D6E
-:109FB0007C036EB4BED7B1BE2CDA2AB02FFFE0FB13
-:109FC0004F242E7E9FFB4FA387C61621AE5034CB65
-:109FD000F742270D2D59D983E6A5F9E57BA1A3BF4B
-:109FE00058F206E79F92EF8532F90CE7F9F179987C
-:109FF000ED53F8FD95C9BE8D960437EE652FB72554
-:10A00000A2FE36E1815805F508F78A8D75E58A16B6
-:10A010008B5301BD8803F141F4479C633AE825DF87
-:10A0200063E3F759A6585D36F01B43CE2971C9B1D9
-:10A030008BD451317CCF32444EB8D4D083E3627E8E
-:10A04000789C4E3BDFE75FBAD3C97285B65E61BECE
-:10A05000793E5FC6BB56DDF6E1704B7A679CCE99C0
-:10A0600034FF16BC037B267D7BF40885E588BD792B
-:10A0700004D7A30D2FF13DCD92956FF03D944B0D7C
-:10A080000F45CBFB6CD2FF52AEC3CDB03BCDD7F169
-:10A0900053AEC7691DAB93EF3AD339CCEFAE5C6AD0
-:10A0A000B0B19C112A2F1AF2A7F11E9110AE3FC237
-:10A0B000CE53D160E33BC00BD794AC4A1257CA9140
-:10A0C0008B75397351838DE3B22AF4F7D442FF6E56
-:10A0D000CF623D1E6BF156F3F74FF242E450E37D41
-:10A0E0004DBD4EC9DB0766B03CB4C4C6FECD39CB0E
-:10A0F000A57C24B60B3FEE93CC593ECE82F766E6A4
-:10A10000ECF47A942EE8E95D5D4E9AD8EA64F84F53
-:10A11000B91CC1FC65EAE514CEDF7C3999D3999767
-:10A1200065DC2AEE22816E5A8BE43B07EFEBF2D11D
-:10A130000CC4B1C6433EEBC9F4DD4EF48D21F2747C
-:10A14000BE35C0AB1C807838D1A6AD449CECC48D24
-:10A1500082EF834D821C45FDCF825C158FFD9156A9
-:10A16000C4F76126287CBF68D2D0DBF4FD40FB43F6
-:10A17000303FE1F757B4C2297EC439CDD2B65B80F7
-:10A180007F635F68BEA3FC5EEA249F62C73B929A2E
-:10A19000AE6F1B741FBA3FE646E876B2486907EB1C
-:10A1A000B09361B27824C9B76A26E4D3B9B06DF62A
-:10A1B000D20981601F952BCB7BFC76D5CC069241D2
-:10A1C000FF55FBC91C8B45DE3F233990EF0B88966A
-:10A1D000A29E942F59A314403F32E6F5B967EC389C
-:10A1E000CFB04E3A28EDD8A7F21EE5D27B324D7E95
-:10A1F0009BD0B48CE08DFD3437A6F5270A6168F456
-:10A2000060E12D1C81F7EB85F1285400F198B7E847
-:10A21000F9EAC13BFFB43A97E1C4F991BF7D68A662
-:10A220002FF25FE09373146BF0DF1B4BB268570D96
-:10A23000EEC1F750C703BF11B96DFC9E444AB64B3F
-:10A24000F2A9107B4BF56089C750BB4B59AE3C77E8
-:10A2500084D59D7A2BFB7BDC6CB734D67DCC66BE77
-:10A26000E76BA4F307EBE75EDDBFE79ECAC316F911
-:10A27000FEC26316FFF657885E2FF7D06660BD8F6B
-:10A2800021DE9EE7AFF1FA8CF74C3AF895FE6E8925
-:10A29000414F47965DE2FB2AA59176B71A444FE5F8
-:10A2A000AB15BE0F5ABA4CDEE7D6562BF25D846E64
-:10A2B000EC58BF99FDBFFC9ED56F7E112E0B75F833
-:10A2C000CEB1B7BCE148EB84EF9F973D60937C34FF
-:10A2D0009089FB0EB72C71F2BBD99F7B8AAB060F1E
-:10A2E000039E3C8CA771D8E5547F4B8CB604DF4BA2
-:10A2F00045CB41D81DE7FEFC6D7E8FBAB6398DDFA8
-:10A30000BF2CD995BF0AEFD97CEED17E82F5974458
-:10A31000BAEC90476A1A62F97C9EDB53BFCF2BDA06
-:10A32000D8CF67E0E7BEC1D28E777DBE1CE7A2AE74
-:10A330005711C06C534CF5BAB6631AF6D1503B4B6B
-:10A34000E8BB21DF655781DDC41E645F35EC32B6A2
-:10A350009C63B371AECFB177FDF73EF7EAF337F404
-:10A36000DAF91D7A6DEEF89E90FFD72A2ED8D3CB5E
-:10A3700023DD3371BFA1FC900D91B462629C5BBE82
-:10A380001F738F7C3FA6F48E7CE66773809302DC9C
-:10A390003B19C9FBB8DC4FE990EEF7FBAD6B0FF44E
-:10A3A000D90D7A0A78F91D827297D71E17241F9546
-:10A3B000352AA677248CFC0B8355C99748DD00FC11
-:10A3C0007E7C479A1D6F39CD213109F1997B412758
-:10A3D000C33ADB513D8E3F99982E0ECAF7BD14FE4D
-:10A3E000BBE4182FF8EF5B95369ADFC3A0FA2CDF99
-:10A3F000ED1A1CC5FD95B868DD69485D3C4F8203C8
-:10A40000C3A9ED3EEACFCDE3303ECA027E1BEC0786
-:10A410007310F742F95B5C7E1BC6296D90EFD46820
-:10A420006BE438DAEA58FB20C8075697BD4FB05C9A
-:10A43000D820DFBD9EA3FFDD119A2FCBCDE50427E9
-:10A44000DCB333EEDD86C2AB449F7F7963AC59CE7B
-:10A450006C5C6B037E6677F35EC639DD0E5DDA30C9
-:10A4600086DF3728B77AF9BE8AA6C3FBB3DB9CF731
-:10A47000C25F327BDD23B634CAFF65B0946BCFE98F
-:10A48000FB71627A2093DFA9BACDC9F1E3B35D8D88
-:10A49000BCDE0E783F44F081DCE22A6678139DF83A
-:10A4A000106F59BECE8CDFCEF944C977FCD795F03A
-:10A4B000FE5B60D5ECAEE079ACDF9789F8A1D9B44A
-:10A4C000EFF10E9770697C1FF6C44333F9EF056214
-:10A4D0009E1CCFE6718FC7BB5344374CD706FD187F
-:10A4E000F7F38DF1AC1EABB4C77BBE6B9F7A0F4206
-:10A4F0004EAF277CC30FD0DD3EB5E302268D6B2F18
-:10A5000097EF075EC1EFF4FDFAFF016A916CD3008B
-:10A51000800000001F8B08000000000000FFED7DA0
-:10A520007B5C5565BAF0BBD6DA57D8C0668BB051A4
-:10A53000C00D0262116D10101575A1805B736A6306
-:10A540003729C48DB7500191ACA89FF3B10D6FA905
-:10A5500095262A9675B6A68D957570B2461B9BD921
-:10A560006A9A5D0F3A8DD33953B6CD32BB09D234D6
-:10A570009F7DD399BEE779DEB560AF0DA475A6F9CE
-:10A58000CEEFFC3EFCE3F57DD77B7DEECFF35E7630
-:10A5900022634CB23136789883B1818C1918934577
-:10A5A000C83FA177FBED02639571ACBE2D13D22895
-:10A5B00056FF6B0B63DFE3DFF89E74A253642C8FAE
-:10A5C000B1DBA05D1B7CAF10D9ABCCD6F33DD3295A
-:10A5D000D0F78A1436D31DD41EFBC37EE3D5EF1308
-:10A5E000FC698B337BEAABE356D878BBA9D07E9A63
-:10A5F00005EB8BDDF51BA83ECFB3E92691C53236BE
-:10A60000DB04FF87A594487B56C4E632D6B057706A
-:10A610001AA1A8E14189B118489F8BF0B164C6BE68
-:10A6200068F8CD3BB740BDCF376FAF64437BE635AD
-:10A63000C73F8A39463036F75236730C606CDEA558
-:10A640003194560FF364380706D5DBF85CBA07C6B9
-:10A65000BFAD2DFBDC7F305AB79FE530F6FE73BFF0
-:10A66000FDE368E897319FDE7D4DCF3A66AD3EA1B0
-:10A67000AFB204C38DAF734D4657158379CEB6186C
-:10A680001C1214CD5E5EC5649827B333671AE413B9
-:10A6900075CC2B42BF6CFD16D904EBF330FE57B5D9
-:10A6A0005C90A95D63BE4F82F50C867AC61C5EDFA6
-:10A6B0000CF0F7580C678448A8E82D910319BCCD1D
-:10A6C000F7293DF81D0CA921A707EF890A1DCC5ECB
-:10A6D00057066D7BF0050333960FEB651CAEEAFC65
-:10A6E000A72AF3BF6DBD20FBA0DE0D4E07CF572775
-:10A6F0001BE6C17AE7AC4F36CC86B45CF95E3E47C8
-:10A700005BDE8D2FAB8AAFCC9576584F571BC75762
-:10A71000D73A3DE1AB6B4F2F7C2531A9671E7700FF
-:10A72000BED8008E2F3682E30B53C057A5332FA817
-:10A73000DEBF707CCD7EFEED0F5E76D0FAA8FFCE38
-:10A74000078DBE1DD0FFACB6BD84B7F2D51BF4C9D2
-:10A7500050AFCE994C7051DBCFAECFB63280E76DA3
-:10A76000ABB7EB1D16FCEEE893EE219559103F4177
-:10A770009E099067BA40BC3BA2A77E39A47B619C2E
-:10A78000258BCD91ECDA9E71B628F43CBB3EDA867F
-:10A79000E3CDAEAF7A886571FA7767F6E6BFB36648
-:10A7A000CE17B3A03FE4CFB345CE24E48B0A51D4F7
-:10A7B000F09B9A3E847883793D06E03523FEC3DB27
-:10A7C0009E46380C5E14E66C864FA9A9011F8E8B3D
-:10A7D000F48CF33688CC6B827AA935818B388F5410
-:10A7E000A0286C8769848D52160BF91D30ED024844
-:10A7F00053249EEE73F2F5C3773F7E6731813C5C54
-:10A80000BF4ACFA1F46A603B57A700FE0D31CCD9F7
-:10A81000ECE8A14FB51F953E55FAED6F7D7BAE700C
-:10A820007D6793393C598633C904E3563E3CCCB925
-:10A8300046B8FC3A0D61000F5BD07A81580B6C7DF5
-:10A84000AC3735905776CD0FADB7A524B68FF586CA
-:10A85000AE53E5933926CEC3C02751019877D7FA76
-:10A86000A1510CF12D302FCA9DB38BCD22CE5B5D53
-:10A87000D7534D5019E6B6BBC944E9334DC068C340
-:10A88000003E4D76CA3FDFE4A0B4AD2983CADB9D0C
-:10A89000369A3F6381886980A78A3085FFFD3C8FA7
-:10A8A000E56541E5536D9CEE4E5B0311B62039FD25
-:10A8B00071BD790D8B42FA0E3C88FCCC1A87B25DD3
-:10A8C00030D4E9F56723C44CA44F3E3FB5DD127D7B
-:10A8D00027C93F166170EC02969BB124FB7423E0FC
-:10A8E0006BEEF2382790129BD13894E4C20C6FB40F
-:10A8F0009300B07E0B4378CC53E460F892AA952382
-:10A90000B17E6BB2558071E65A9CE75AA9FDD5CE4F
-:10A91000FBF17B4B99212593AACA26906377287275
-:10A920006C89C0DCC88777A09C44FE120FA5A2FEEC
-:10A93000B9A355F01B29CF560B00D721CDEED27805
-:10A9400094135B05E70E6CBB0DE4A9A9479E760D39
-:10A95000737F817A817D07F407FD5F252002715D99
-:10A960006D721CCAF14D827517C379B90D089F0528
-:10A970000A9D9C6E3913E1C8EC81EBA3F85F10656A
-:10A98000CC238B286F1B143D86644079454E0E31D5
-:10A9900070F841CADA113F3AA709E9A0CB9212C573
-:10A9A000FA286F884889C3F239AD12C945959EAA25
-:10A9B000D535287C3317BEA3DE2B912A6291BE5673
-:10A9C000B64CA474CE8692CD5EA0E324C11D3B9A02
-:10A9D000D6A367B89E39B513AF47BC55EF30469B39
-:10A9E000006F497A6F524E103FCED9BE2A8941BBC3
-:10A9F000F3DBCDD351FE175BCB8AA3A1FDBC6DD198
-:10AA0000D952901E49CAE67A6441EDC43806F0ACCA
-:10AA1000F9FB9127ACA08FE7429F56E8FF9BB670E9
-:10AA20009F17AAD434ED4F9280E7DE3179E2B3A1CB
-:10AA3000FE42F1E02DA3501F08BEA7E2A9BE23CE1F
-:10AA4000DA873C50D373C00F0EA0F7DAFFF51EF57E
-:10AA5000F395F8D6F5E5D0BEA6F68548EC67E1A6F5
-:10AA60003FE45BA1FCA0E849C3FE3F17B63F654544
-:10AA7000026CDD9E857A7CEEA6B4284F1FF217F992
-:10AA800000F151BD5F20F8AAE5337C510684BBC7B5
-:10AA9000CF0C564CADCC80F47E5E628D680FA8F66C
-:10AAA0008C5A3E329BCBADF351EB93904EE63FB5C3
-:10AAB0002509F5CC67113C5FF1D4AD6FA0DCF2EC59
-:10AAC000341A10AF1E1D3338519F7941BF221D55D6
-:10AAD00003FFC693DD61AE047A2ACA0E27B8CE6F93
-:10AAE0001D41FA519D177CA7F2CF74CC85F318D283
-:10AAF000DC998D74FF679D7F2EE2F3CFF566A71773
-:10AB0000F199CDF5DB9FD74BA558EE0586417BE447
-:10AB1000CFEB5F8848B5F4D86F25D2FBB28476D6E8
-:10AB20008B4236EAEDF0CC76C32CB21B18D1599D7E
-:10AB300095D359C3017DE9E018B2C7A8A446E73709
-:10AB4000F485AF058ABDD59DDFB7D7807C52B3872A
-:10AB5000DB11356D67C88E50ED925A859F17EE391F
-:10AB6000437685DAAE6E1F874BED3E5E5E9501C87B
-:10AB70001DCDE5800042BA0AF105F9FBFEF5D7D3F9
-:10AB80009769F27B297FDFB5562E0F759D49A8B7CF
-:10AB9000D6649C3420FE6B972BFD425E1F34DEBCD6
-:10ABA000EC81042F2C1F6AC1F60E8DFD50BB2F9A2D
-:10ABB000DAFB6BC356A3BE97EB2C3A4C9B6B2DA4D0
-:10ABC000FFB7D58B19BA5C9C5C9813EDB983619182
-:10ABD000592847072E3C650648026A3B8F8850BEBD
-:10ABE0003ACA732FD2671C03AE90506FF805B45F5A
-:10ABF0003B5EF97404F63F6E48E06B0653D70BBF1B
-:10AC00009B5E0CF26419982D641F670646201D0F89
-:10AC10003CCCE5F4E37AB61AF51BD3B9D93428F75E
-:10AC2000A3DC423C7F1BE6DB05FFFF1DF30FC6FEE6
-:10AC300099C93F14DBBDA4D0A7DB68592DC0BCAEB9
-:10AC40001EEA59834BBE41D05F932D220EA434AC33
-:10AC5000D7A1E7DF557B758222A713C18E40BBC801
-:10AC600030C86E413A6E36F3F509B2CC1A611EF760
-:10AC7000671E9E8D7A7A6DA78919619D133AC3C8A4
-:10AC80007E4D1CE422BDD66C4E22BD2D3874AC0224
-:10AC9000EA1FCE14FD3AACCF4C3EACCF4C2176AE81
-:10ACA0006896B19D70F0B56F51BE0F962E1E8982C9
-:10ACB000F50DBE477036439DCAAE738FFF1BA415BA
-:10ACC0009776ECFD5748FF2DCAB313E17ABACB75DE
-:10ACD000C603A85B6B6D3339B9DE60C1EB3878EF22
-:10ACE000B79136B1677E1D9DE79EFB4D2EA62627A8
-:10ACF000EA9F090725D21FA1F3E9B0C3C487523DDB
-:10AD0000B23B3B2CA24F10B0FE91F7707E134C1655
-:10AD1000BF84F6BA49FF65B07E618EC4E87357936D
-:10AD20004A61DF8391108B93477D74D14276EB3873
-:10AD3000850F553A7B2B9BDB8F6F297255853373BB
-:10AD4000C82C58AFA8F06CD6ABFA2210CE327BF8E4
-:10AD5000769152AFEB9228931D5E6DF431E8B2EB21
-:10AD6000E050D233FDC9D93FA0DD01F6C4F254F959
-:10AD70005D842753F4EECD0AFC54FD2D29FDDFAC94
-:10AD8000C0F1668BC8E1765308DC147A0AA5971ED9
-:10AD90007A8841DBA31BCFECBEF6A351C984DF6BDD
-:10ADA0001EE678FD90F0FAED5B2B80CDD8A0BF4D6C
-:10ADB00021FCFE0C78F58BB93F02AFEDA178F59B35
-:10ADC00087215E37896467A01D8876A307E5C0B533
-:10ADD00094E7F66006233951298539D724E3778033
-:10ADE0004316C987A3281F54B930C415B806F5E91E
-:10ADF0006970E5717E01B18D97E7A4105D24B0F60E
-:10AE0000782C07BCE7A17D279986667E0C72B7E592
-:10AE100001DFDEDF403FCD826FEB3C988FF7668B22
-:10AE200013EDB70E9FE8D5C33C5AA259D67E18BF82
-:10AE300065FE554E2F9633456E4C37F8D07E83EF26
-:10AE4000498DF8BD9C7F7FE9EF671F44FBAC338DD4
-:10AE5000D1BA5AB2593ADA672D6519F4FDB7AADCAE
-:10AE6000793082B72FE3F4DD32DFE6433DF4E8A327
-:10AE7000BEE1A8275AB6CBF136480D519EF81C9872
-:10AE8000FF2089D37D4B329443BA597097CFC57E4A
-:10AE9000AEE1F30D94873DFF1474654E05D106E5D0
-:10AEA000A71B2376A05C55E974F0302EDF8778CF9E
-:10AEB0006C45387927B08C7AE8FF4385DE54F80B6F
-:10AEC000C0368D00F798103CA87417A3C05F58CA0D
-:10AED000E9CF3B41594F1DF3A1BF910053090738FA
-:10AEE000571AC1F0837496D5938DF36F5E0CF89169
-:10AEF000701D1C0FA74556DDD6075F15E628F10D1E
-:10AF00001802F9A69271BEA944BA427A6C04BA0A30
-:10AF1000A2471648883E17AED015CA8308F7B81C5A
-:10AF200058E757C21FF2B1F0ADFF94A6F735CEA493
-:10AF30001C2E2F1E337B4A7348EF4DD0D89D6F6572
-:10AF40007F9A88FAE5F4BDAF25609A14E59E8CEBF4
-:10AF5000D85CFED75214FF1FC607F4B88E0FCBFF84
-:10AF60004F22DA2D954B5F23FABFD2799699983705
-:10AF70001CE01E5D2C38FD00BF792D46E724F81635
-:10AF8000575C750CE159D66A74189156D8628D1CBD
-:10AF90003B2B8F40378A1DDA6A24BA39F74B89F484
-:10AFA000C1B9928BAF0E800FE756084EAC57D63220
-:10AFB0006C2590372B2916A85E9957A07A65A91C95
-:10AFC0005F271A05A23740AF253B28DE31A7F58E53
-:10AFD000A988DF13C55F0FA4F8C17A1847E5632E6F
-:10AFE000DE489E9529F5AB561B9147BBBF97B5AC84
-:10AFF000BA88FC3FD31B52DE3AE953ECB7AC515B45
-:10B00000EEC635821D77574E440CCA07E664CEEF74
-:10B010001148F240F20FFA93BB407144CF300FC297
-:10B02000C389BC617AA4EB990857A0DBE8A57CDD55
-:10B0300033A70ABE49B0CE9916CE671F9609BEFB4C
-:10B04000053EFF0940EF65501E0B745D16C3E438E2
-:10B0500048DD26E60FC7792E1DF609CADBD338D4A2
-:10B0600028AAEF8FB4A15CF7E81189B7322FA5E5C4
-:10B07000CC47E9EDCC4FF398C13A937490AF93FC71
-:10B080002B318EF32BB36703D2D75F8B4E9C16E028
-:10B09000FBDD3942DE2894438D0368DD975B1F702A
-:10B0A000A5807606AA41AC5F96E37E14FBB3CA4C3A
-:10B0B0008F71AB74958E5A993715D617BBDEE29B0C
-:10B0C00004EB8B6BF51CC2F5A64F373810EF8313DA
-:10B0D000F83A1374DC9F3F546E60A3810E363F181C
-:10B0E000E6433ADBBC3520DAA1FEE6038001CC97CB
-:10B0F000AF14BCF0DDEA614E8CD359751E11EDFE24
-:10B10000A2568F1808E2A7E1B241443991BED32379
-:10B11000A29EB45AD7533D355FACD44F3779065908
-:10B12000C94E9E4EF4335CA11FB59FD456835F0475
-:10B13000B817C94A7D99B757FB618A9E56DB6139BA
-:10B14000D2677AABA34F3F454D5B503F838FF808E2
-:10B15000C605D27BCA1F71FDDA84F01B78F3AB36CB
-:10B160004C370321F8711C9DC74CE379F83CD3158B
-:10B17000DA87BFBF7F8FE3631EF0BBB9F5FE22E421
-:10B18000A3CD001FC4F3E69DB3CCD4CFF4599A7974
-:10B1900031A986F22508074BEF753CA2CC2F3DD58F
-:10B1A000235A69BDCE4368E7A5CB8CE2016A3F769E
-:10B1B0001D7405F46A777A857ACCCB905A94B84797
-:10B1C0003A8EB34E40FF315DC157496BFD6133F696
-:10B1D000E366145F4CCF85FEA1FE268483A137FC75
-:10B1E00042E7995ECCE77342A9DF8EF194746CE775
-:10B1F00058114374C5E7D7D5EA14621C97B18FA0E4
-:10B20000FDC9907E9EC2B80CA4CF4E7E6D4A2EB46E
-:10B210007FFED19776B4D0520E3EB30FE556ABF514
-:10B22000E69B709C83229FFF4D72E25D98DF6D204C
-:10B230003D9ABE534EDB44799313FDEBAE56DF557A
-:10B240002F42BD2C18C664EB3D8F130A9CDA153AC9
-:10B25000383979CB205CEF5345772C5802ED875F66
-:10B26000F7388D3B7CCAFC9416C80F9BF8CBAB30EB
-:10B270007F5F8EC73C02E4FEB0D25FDEB60FE56AA8
-:10B28000E9FC1C8297C57645F2A939DAE3F502BFDD
-:10B290003747DC528EFCB8D26670482477EB19FA37
-:10B2A00059CD1177DBB1BFE5D1F9264C0DD6BF36AC
-:10B2B000A19C3C6EC931211E9A2D131896EBAC0A45
-:10B2C0009EBE1B4FFA40528872778473BA4C74E565
-:10B2D0006428270C0906ADBCD671792FD91D3EB460
-:10B2E0009FBAACF54881CC600954A07C935479692D
-:10B2F000717A713CC9E2B4A3BFB44291372C86AFD6
-:10B30000D36039F79F38AF5EFD632E96504B7F8632
-:10B31000B0CC2841F93FDA9BC6103E575383C5BBDA
-:10B3200018F544687F5D2070508EA34F4776337EBA
-:10B3300048EEDD5EB21B347AA45B5E7AA2F521F2A0
-:10B34000521E817AA2582079E961EB0CB8FE120CEA
-:10B35000B2005C3CDBB85E54F97B26CE05F0E549D3
-:10B3600065915C5EE9E473260EC6EFD1AE5C2A45BA
-:10B37000221E025EC9E0E9C39FF778937F501E9DAD
-:10B3800041FA87A90790FE21FD44E10F8F8A076FDC
-:10B39000D9F5A3505FCB12D90395CB8536B4CFE254
-:10B3A000BCD14769BEC5DC2E6897BFA6F51C2A89AB
-:10B3B0004B44797962D999C7EF41BDBE299CF4FF0E
-:10B3C000A4A56756603C6EA657701A21EF591A7DE6
-:10B3D000F77B986F343A5D903FABF081FB974591D6
-:10B3E000684F08B8CE8C9E75561632839BE239F1B1
-:10B3F0003396403B4FA3E0343B7AE0A1C77A52EF4B
-:10B40000F505BC3746FED0FA3FBCD7A8C859773EF1
-:10B41000CAD9A2C6E4870A705DEBF57C9E8DD1D7B0
-:10B4200053DE27393976B91C9EA9D83F9EA5B3575C
-:10B43000C6C3F7C06A41F9CEF156A9C8E540E38812
-:10B4400063183F0D2C17483E79BC52A21FDACD5C21
-:10B450009E4D78EF280A905DD8E53DB4925A2B7244
-:10B46000DEA37436178C58946FA7DFE3FE9F47FE68
-:10B470006325B69BD3A2B5832602FD0C40B8BC67FA
-:10B4800026FDE9F196D1BAEFF04569EA55AD8ED3C4
-:10B49000E43DAB8BAEC7B0E7AC7B27523CAF9239F3
-:10B4A0002291DE2A656E37C19F251BE633579D4FDB
-:10B4B00031B7C72A8BC17EA2EF5A7BB0C7FE893352
-:10B4C00020DFA87854F1133AEF5E7619E376D0AC1A
-:10B4D00075DA7ADD761030168ABACAE5DA76BF32C6
-:10B4E000BB9F45B9E8DE38E01BF2ABAE501E828050
-:10B4F000217F6E26E3711FA6E843D5CE2F597A51DE
-:10B500008F726866E3453DC273E6D21FE6A75F38D7
-:10B51000B5F3BEA1204ABB3E394E93BFD13544534B
-:10B52000FF66F730CDF75BA75FABF95EEE19A9C9EF
-:10B53000DF5E3D5E537F46FD24AD1C7A379AD6A36D
-:10B54000E2A7BF79BFA5E8A37742EC12359D3AE2A6
-:10B550003F1391BF3F2C67E4BF7C7833D3F8311D94
-:10B56000232482E7805C3DF931F7E5C8EF8F20BFE7
-:10B57000C94FF4A1C2F34373A1C928A27F62E47E3C
-:10B5800079A85F729039505ECED4B1FD42548FFFDE
-:10B59000670EF39CC7FEBAE30D4B0FF17843881F8B
-:10B5A00073A578FF7006CCBF0F79794D2EF7C316BF
-:10B5B000EE36AFFF38088EB56DD19AFCA2FDF1EBE7
-:10B5C0003F0ED63B4B041DAEB346E1935A16A07D09
-:10B5D00052BBE8A0FEEAC4402CE63B58676CB4F4CA
-:10B5E0008F838B0A0F808F253728DEA9FAC33F1976
-:10B5F0003E450A9ECBB4701A93CBE3905F8F10291F
-:10B60000DD9C23C7E7FE03F11CB49EF4DCBC7FDCA9
-:10B610007A2247C859089F9F1BAFDFE31E0F94177C
-:10B620008E900B7F26B84CFE47C2A547CF472FD838
-:10B630000DFAA3729D81FBFDDE335CBF3772FDFE08
-:10B640007CB48FF6879BF344E70E07ED97D23EE973
-:10B65000A17B8D611918DF59A1237D797A99908199
-:10B66000FEC226218CFC360FAB4816C8BEB978C87E
-:10B6700048FD31AA07EDFD3A90F351053E6B09E410
-:10B68000DFCCE571B1356E714A8A03F5F61FAC1E49
-:10B690008A8B7AE2111E9EFD30E16B69DF45EE2B4D
-:10B6A0007E12D06BE5D112858F5FCCD5D13A1F2E9B
-:10B6B00014B99D942ABA701F6315D8A968570696C5
-:10B6C000EB285F91C7E9596DF71F0A9DC794DD14F8
-:10B6D00086F388DA24BA7D7D8CFB512E8F0F3D795D
-:10B6E0005718EDB3012A7468EFDBBDD6692E58AF49
-:10B6F000BDD0968DB6DFDADC68EA6F4D469715CF80
-:10B70000A1FC8C7478CA8EFEA0C0FA8C33CD55E6AD
-:10B71000ABEE0F5894FE36E941BFA29D2298281E39
-:10B7200061F11AF9F91567B126DECA1C020B6EA782
-:10B73000D6F328F46AC7421BE197F6EFD578B15DDE
-:10B74000A117A41BC4BB4ACFA1FD8389EC8DCCE912
-:10B7500089F3D915528E1AE5D98D748FFDEA901FA1
-:10B76000BC5CFE076EBEC4E32CDED7DEC37988E185
-:10B770005F529C0CEC4ACE5F4B43E2BE3F914F02BE
-:10B78000660ECF4084561EDEABD0C9DA7F82DE481B
-:10B79000BA02BC3E9CCBE58FABC0FD36CA3BC7B2FC
-:10B7A000D430A2FB1F0B2796604538515EBA723821
-:10B7B00079F33D1F109E74CC6FB4717F0BF9E17269
-:10B7C0007CA4C23149649EBEF4F2883CE5FB1BCAEE
-:10B7D0007EAEB76AC80FD9612877C502C6D22CCC15
-:10B7E00061BCB6FF7A0E9C8F85E86A39D2E5AE96C9
-:10B7F0009430E4CF6465BCCA9BD2A70C77A05F20CD
-:10B8000018D00E04BFC3C0E33FDC4E57E57A4FB9F2
-:10B81000D67EC4724F668F1FA6DAF7EA773C97820E
-:10B82000E3AAF359A5D861FDCD7755124B72A2DC7E
-:10B830005A768F80F0DCB15AD4F87D715E612503B1
-:10B840003F3ECE7FAF13FD8E38B0AFCD28CF75F51C
-:10B850008233085E817B810A381387F82BE04FE240
-:10B860003ABD67895E42C757D7B1AB858F1BE75D8D
-:10B870002CC8909F54512FA0DFB756997F5C05A329
-:10B88000EF69993E01E3219E16568AE3555633032C
-:10B89000C6F52A33995386F2CAC64374DEEDB9025F
-:10B8A00039256F20C94F3A4FE32AF0A4E7011D4D17
-:10B8B0004D28437667B84B86F1897F161DA7B54C96
-:10B8C000F0A2EF59D4E23C84FE01D011C57D3C2D9D
-:10B8D000011A5FE7E571725D8BC1E98075488D657E
-:10B8E000B4FF21551B9C32D43BB629DF8FF1952D37
-:10B8F0008DDCDF0DF59374D6FAD7C3D15FAB109909
-:10B9000044010A792AFA5956852E5630773BEEF7CC
-:10B910003319FE41BB48A5DC5A3D6F2A6622E5D0AB
-:10B920007883DC139F409E6BDC40B2D394AA8D6772
-:10B93000482D2BC9AF33627DA8AC0F897748D5A5B8
-:10B94000141797ACDAF25BF32262088E593C1E9E04
-:10B9500073EF888DB7C27C727F79E31F303D8741DA
-:10B9600033805BFEB23B074C87FF16ACD87823A62A
-:10B970004FBCCEE89CC18FE057668CFAF1FCFAE828
-:10B9800095F2ABB2260FD0B9C2AF7DD2BF1A4F0924
-:10B99000E54F95FE43F94E4DD75E867FD7260512BB
-:10B9A000910F4FDF3B3203DB5736DE73C8C7885F2A
-:10B9B0000507D077A577711123BA605697D05B5EE3
-:10B9C00084370B49ECBF371F3F867C3BFEEFE71304
-:10B9D0007F08DF95098CCE6381FD49F69C9AAADF2A
-:10B9E00023F2B93EBD906724BC4E46C10AAC3B056C
-:10B9F000DAE0BEC778604E2BA47F2EF03C8BE34D7F
-:10BA0000813C9EEF7BFD406B0CAE374BC7F58EA79C
-:10BA1000DB8EE67648B7FFA8D80F59063605EDDC71
-:10BA2000C02611776E59E0C0E73BD6E2BE6BB9C9BC
-:10BA30009906EBCABADF48F484048AF6519668A7DF
-:10BA4000B8E5AEB68FCB699FB1D1C0D2286EE00EFB
-:10BA5000C3736400CFB0AA4CB257C3AC68AF7A8549
-:10BA6000A4AA881E7B08F5220AB42CEFAD53AC3093
-:10BA7000FEAE42B047337BEC1CD5FE599C9F4CEB8D
-:10BA800057ED2068C7B0DD8FE5A74A0B4B22BB19E5
-:10BA9000E683FBF7B64C2690ED1352FFF43223D920
-:10BAA000AF76AF7BCA70B45B97A7E6A0DD0AE39AD6
-:10BAB000246E7FFD3BCA67BB4EF95E28E6E0B949BC
-:10BAC000751F800574D1188753EDAAFEE7A563E7BB
-:10BAD00054B905957F9B2F9FC17EFF5972DD635539
-:10BAE000E84D4D63F879E0E90ABD8DCF37539A9E52
-:10BAF000FFB3DB73A7AE93FE79EBFE39D7E1FA9F74
-:10BB0000B18ED8FF21F8D83CF97FC63A6E99F24F32
-:10BB10005C87375F6EC8CF4379D646E788EC2E7EC8
-:10BB20002E1CE4DE3DBC9CCB398B930964C7FF74AB
-:10BB300079D784FD9D411F1CCFA17877083A1867FB
-:10BB400088A5A188ECCDA58CF681862CE5FB404329
-:10BB5000963A4D22DA03166E270E52ECCE414BB9BF
-:10BB6000DD19A79C2B888B117D32D43FF6CB5BCAA5
-:10BB7000E7C6E0BE9091ECD5E636DDF516D4535E0F
-:10BB800089CE8F86DA89D2D2954A9C5F6B9FAAF6BE
-:10BB9000681AE379FDB2B3B44FA7DAA34394F2B4C1
-:10BBA000A57C3F60488BD61E8DABD6DA8FFA82100B
-:10BBB0003B73A9BA7FD049EBD32DD7E9F1FC7FA81D
-:10BBC000DD897BB0A81407AB7A06B4FE4DD730F6FA
-:10BBD000747EF7F98C1CDC1F9AB95AD0E83955CF1E
-:10BBE0000224287EA4E2E343D473883FF734B55F90
-:10BBF000D26F3EAF48704C2E4FD79C5362EC7E1EE6
-:10BC00002F71733AFAF5EA116BD1AEDDB7EEC63794
-:10BC1000317D69FD9DE1E504AFF5546F7FCBC6EB47
-:10BC200030FF5076BB3D12E6F5D0A853EF09D0EFB8
-:10BC30006A3CE385EBB378298FB6149E8BD0B37A38
-:10BC4000DADFDBA40F4C9F0DE52B12451C91BE23C0
-:10BC50001D9832189D9F3059787EF5358CEEE33073
-:10BC6000E55C9F1A87093DD7B7CAC3C75905F0C419
-:10BC7000733596187E1FA939E1FEE908EF668781C2
-:10BC8000E139398B72EE4F62D5AE2AA877DC7EBFE0
-:10BC90007D16EE0B6718887EA498CE26C493D99E95
-:10BCA00063AFC27142E235CD29E9372059BCB5FBFB
-:10BCB000F09E67207D7BCFC92F319D2AB5EFC3F35E
-:10BCC000255246889FD26BBF9811DC9B87335F4A11
-:10BCD00032963B6E10914E75EB6F9A86FE54C150B2
-:10BCE000E71A584F5802F31B601E61BDF689797B35
-:10BCF000A9209CCED54896F5150DD8DFA808BA7FA7
-:10BD0000C0BE03AECBA7F34DF457F680A8473A0E5A
-:10BD100053F68FC3327BED1FD3FCC2304DE1593B4C
-:10BD2000E4C3157A5F637BCA87FB776B13526E108F
-:10BD30001D3DF5695F19D6BBF2BB1BAB685FFD26E5
-:10BD40009315CF9F8529FBCAA1E374A53A5B67438E
-:10BD50006AB418647316F1550F5F72E0D85383E626
-:10BD600001F5FA9CA73A6E731EC783DA9FD1C264AD
-:10BD7000B42343F7AD43FB817970BE56EAA9FD3188
-:10BD8000D646E70174888B517DB5ABA7B90DDFE9C5
-:10BD900024BB1FFF82E382CC1A43FC35AC55DBCEBB
-:10BDA0009CCACF0DA8F4182A2FA5D0FDF7D47A6F1E
-:10BDB00038E1819F2708AD1F0AD7D0F6F0B7335876
-:10BDC000DEDD60E1FB885DA99DB922AC7BA53D4726
-:10BDD000337F5ABFD0D37FEFFD3C6DBE4C36F6B9F2
-:10BDE0003E94077DCD77824EBB6F596CD1B62F8DB7
-:10BDF000D17E772568F39245E9DF916DA2F31A8E23
-:10BE00007C139EF753F9D818E2EFF78ADF2AFA2E4F
-:10BE100091C9741E7593DE790EE5C4E33340D201F7
-:10BE20007D3C2CF8CC582E55B45B510FC6ADD39346
-:10BE30009C7AFCAE5BCEE0BDA016A06B84E571F7EA
-:10BE4000479B6EC57CB148F10D9BFB7039D251CB3D
-:10BE5000775FBF371BCF9F3A0D74CE5B3DB7B1758F
-:10BE6000AC612B1E0B8ACB94CD69F0FDA12AE68430
-:10BE700099B02363632371FC2DD1A215F5DDF3D1B5
-:10BE8000F5FF8E7194E6198CF61942E15737D246C8
-:10BE900072366E75B680F75B1E1E9B5F8972310627
-:10BEA000FC6594AF90CA7DC517C715F0F8C0B6C53C
-:10BEB0002FC523BE37580FDB699E15A213A7D85292
-:10BEC000C1E57F8B85D13E7BF3A852371E4DEC72C6
-:10BED000C90E3C8BD8E2DE41F35E592D72D9AC9C81
-:10BEE000970158C851399CBE0C364AFD986E34B340
-:10BEF000F839289792C2E87C507FF681B484CB57FA
-:10BF00006C6FCCE9BFDE43118DF1C85CCB67E49F59
-:10BF10009F0BFD6D9DB199F2AA3C8D53E8BBBBDF31
-:10BF2000103DBA1BF04B72361AE42C9EC7638E8705
-:10BF300089B775F5C2B4203AD555807CCDE2E72E9D
-:10BF4000307EBBBEA834E387FC4C9D9BCBE51855E7
-:10BF50001EBBEB9761DC05DAFB515F633F78CE0FC8
-:10BF60005219D7B751A83F447EF30C8303EF39E849
-:10BF70002A400E437B5D82564F1C18C9F135FBC128
-:10BF8000BBCC9EA0384D8C721E66A3BEDE9C06EB19
-:10BF9000D93843746E07786CA96810FA8AC7C455FB
-:10BFA000707E990DF5D16FDE5291131BBC9E668C8D
-:10BFB00073C0D036D70F9FDBD385C8BF5D2379BC54
-:10BFC000BD67DD1CBE71403FA8879A4797AEE66A01
-:10BFD000DA41725567E56D6DAE7A3A07D955C1CF32
-:10BFE0005DAD13F87E82A4C4CB9B8BF249BFF44BAA
-:10BFF0002F152B499F84E2579D3FFDE507E91199D5
-:10C00000F1F119879BB4CE4CFAE107DA3B74F94A97
-:10C010007DD40B1E6D7FBA625136E3F8A85F10AF76
-:10C020003AE6C57B93A1FD952AFC163A1FC969E043
-:10C03000EDB19D8DF88BF4DB6901E0C8E982CEA1FA
-:10C04000B3F7383CB7243A7C6BF8012ED28774AE34
-:10C050002BA5F7788F098E65B8EFE87D5DA2F3E731
-:10C06000A17A4FCDAB7030B136E79C3EEC4D9C0FC2
-:10C07000EA3569A7D789FA01D0978AED362A4B09A4
-:10C08000BBB3D45CE0E8ADD7BA5C6DABAF82729362
-:10C090008399F6033C4C53997F30C079ED33CF1C24
-:10C0A000BF8AF53D0EAE03F899E0BCE6F94733E6EA
-:10C0B000407BF3EDAD26B4B943CFA1F56EEFA47686
-:10C0C000714BAB4CD319C5236554B986080BD9AF56
-:10C0D000CC7486E4B334C9C6EDA7103DB90EF85050
-:10C0E0008FF04A6404AFD03871E8F84905C9FCDE26
-:10C0F000E4E2521A774345A71EE3905DAE7AC54E3F
-:10C10000F2F4A9EF42FBB17B3AA723FF77151AC8D7
-:10C110001E7EF8C1499311CFDE6512C5D17AD17B5D
-:10C12000C8BA3D23F59CAE1C8BCD287FB7CCB9DBBC
-:10C13000ECE8C3FED852318BCE2F5A96703B63A5E4
-:10C14000BD81E488A542B9E7A2D8CB71AABF13A2EA
-:10C1500027B7543798F1DE9B7ADE9085D8DB97EDD0
-:10C16000BF1FBDBB61F98BF1A84FEE2A6988C77963
-:10C170006F89F04F7713DFD5939F02F2381EE5F1F8
-:10C18000A2910E922FDDF27FC6393B0E1E18695523
-:10C19000F88ADB435FE27F41BF668D92A714601C83
-:10C1A0002DB5448E7660BC74DFBBD300AE93BD7AF0
-:10C1B000F2638DFB81F4C12F322638495F9E1E68E1
-:10C1C000B0229DAC6AFC468FF76BCEE2E955E87F62
-:10C1D0005502B78756C51898DF42F3A1454F752E13
-:10C1E00066A8A7F509DC3701BFC58F79162310FDB6
-:10C1F0004C8EF1BAAD00872931BEBB30AD4AACD709
-:10C20000D9609C1247B480F09DA263C5061EAF9D05
-:10C2100085F35C11F311C55927A7C5D17D54A3C57A
-:10C22000ADC3FBC97A67D5F6B58CCE8B51BC15B0C2
-:10C230004AF7E18C18C7BDB6278EABEE13A9F1DC27
-:10C24000750529042F21C1FF2DE223CB1A10F11E01
-:10C250007E983E40F6F8AA4613F941CD093BDA91A3
-:10C260003D3223F83EA47A3E17E063B1027C560CBF
-:10C27000BC9BD6959414BB17E7A5FA91F120AF505B
-:10C28000DE6525CC9B8AEB4B7AC3ED4A867AC60CD9
-:10C290005D366016E0EAB9A278AC1EC6213C58D8DB
-:10C2A000384CFBABBF22D140F1D8D0F2270B785CE1
-:10C2B000320B0521AEEB5E13DDCF5D75E0BEF7AA54
-:10C2C000507E1E3039C967678114BCFFDE1D77665A
-:10C2D0007CFFDDAE9CBFB5DB0D743FA63BBECCF84A
-:10C2E000BEBC1AE7881AE5D98C78F231C721F4C7A9
-:10C2F000FEAB718F1B46CA4F607FAC6DC015C56326
-:10C30000C2C6EA689F2729857982F7055629EB5F1F
-:10C31000D50D877A3BEAF575289407F60F878D3798
-:10C32000E7BB2622DD46EC8847FDDA47BC431317FE
-:10C33000C17B2879B10462FA93AA799C2466EA3C0D
-:10C340008A774853F93ED90A1660FCDCA0C0847C89
-:10C35000BAEA4BFD0D7087E8D7CC7A929391AE90F4
-:10C36000B8482F7F45E6766588DCDBA2F0F9F1025C
-:10C3700025EE91CFF2BFE79325BB2852D9F7891854
-:10C38000954272E811570AD943C41C41F0BE9C9DE6
-:10C390007350B1877EA79C8FF72BE7830F2BE78322
-:10C3A0005FC5770BC0903F86EF16407ABCC949E560
-:10C3B0006F341528CA99E36F45EE9248B21F94F97D
-:10C3C000E994F9ADB04E7325037E566DD3D37958F9
-:10C3D00063C284E968CF32AFDC9E11DB73EF8775EF
-:10C3E000C2BFFC9E73A75D091E3A4F3AC7CAF73F0A
-:10C3F000557C2D54EAAF12B619905FC7766AE136C4
-:10C40000FE52A4C6AE2C62DAF397134D4334F54BBB
-:10C41000ACDAF39793ECD76ABE4F7668CF5F5E973E
-:10C42000313E641F564B570B13806E804EAA337DEE
-:10C4300034FF85D6528A7BCD0DB9C77447AB363FE2
-:10C44000DFA7CD2FDCADCDABE7C9C34629F43092D1
-:10C450008DFC31F14EE4F70C85EF0701BF6FB33A65
-:10C460009911DACF1678BFF81EC6001BED4BC976BE
-:10C470008C23ACE3F79FB05CC7CBBDC395F67ABE07
-:10C480006FC58EDBE8BE1D4BCCE1ED06F0EF7EFC08
-:10C490008EA4F1720EAF87FE12D61BA2F453C3E531
-:10C4A000939C45FE829BEC33236BB3626A01FEC210
-:10C4B000349A39E99E750CAB27BF7590727F325163
-:10C4C000E8A4BC43B086613E4570A6F0F8858FE4D1
-:10C4D000C35049FE752AF1895B7447F4E6970DB99C
-:10C4E000BA07F0AAF8860291E4E2235646EFF9D89B
-:10C4F0005CF713BF6EC316B06E336B8F49157AF8B5
-:10C50000E7EDBC61C45F135C0EDA2FB515240B7820
-:10C510002EA588859CCB364569E8A3C41A17425FCF
-:10C520004342E84B4B7F7F9DECD5453990CE42E8A6
-:10C53000F02FBEE5512C18AF4C8FFA058FD58976B8
-:10C540004A059ECA02964F75469B31EE678BD173A2
-:10C5500079A5D83FA54A9FABE459EBB2E1FB6B56F6
-:10C56000D149E6F6BA2D3DF12518DF9600F635EAF9
-:10C570006399915C7DB0D31F7635D47F04FCFF6551
-:10C580000CFD1BEB64BCEF65B5E4105F3F624979BD
-:10C5900000F35ED0E8587F4331F7AFE5E86C82EFF7
-:10C5A00051A1BE05EFA53DC2F24CA9C1F52DBCFEBF
-:10C5B0007A596451909F183182EABF9D6766F8CE20
-:10C5C0008177A0D98771EC63F2AC77DD41EB7F7B9B
-:10C5D00014D707AF191CF1A80F1E997C77A687D234
-:10C5E000748D5F684B10E4BECE17858F3672BD9296
-:10C5F0005BE2C7787C74C234579903FD1DB70BE921
-:10C6000042E712F1E85B37FD442B7EA8E406C10F38
-:10C610004B9B745D0E43FFE3110B77351E299ED5AE
-:10C620005286F90291EE03D95CE2EBD9B8AE027EF4
-:10C63000FEF04AE571A81E18329ADBBF9386443C8F
-:10C640003014FADF50245AB1FF0D7A2BDDE7F14E9A
-:10C6500066E45717BBEA97E0BC6D09110CCF6FDA9F
-:10C660000A1A78BED8C0CC004F936BBD17F1694A47
-:10C67000F58CC0F647077E7A1CED195B82483A704C
-:10C68000A2CBF9AE1BEB1728F19DE279EB703C9B36
-:10C6900045B49A590F1C54B9BE9EC9CBC9FFB20A02
-:10C6A000F4DECC0A6B430DCEE7918470B2F36DAE2D
-:10C6B000060BE279C3403DD14149227F576A55C2FA
-:10C6C000B40ACCFF62A09171BEF32F1F8AFE815382
-:10C6D000A075355B1A685EC72E8939C1EF96A8A987
-:10C6E000D9A185CFEF46F1F89009E3F1809FB7F526
-:10C6F000CC9C9A8BF4A3A778537F7C6B735DCE7E22
-:10C70000FB61FE2A94030B11BE8597C2984F40FA35
-:10C710003D2961FE777F015B80D6D960C1FE416E05
-:10C72000BBFAA2BF88D19C7E9B0B0E4BF84E82D7E2
-:10C7300021101F345B4E4E443E7828B58CE8E8A1AA
-:10C74000828F9A892F86F3FCDB79F7EE413C7A13CE
-:10C75000C3697FE7A1825931C1F4BE609448F432C5
-:10C76000EE6F614E3FE2639481F8FB9108C7568CEF
-:10C770004F79F3CC64BF4B8275D96C98E7C46228BB
-:10C7800087FEA25D623EF17E75058F0B2B307ED554
-:10C79000653B84F8904A66317EAE4939F71491EFD3
-:10C7A0005C4335B4FA6F952597DECFD892D07042AE
-:10C7B000D9B620BB6A9022570694884528DF0659CF
-:10C7C000B85D65EB940594BBA1FB47AABED729EDE4
-:10C7D0008C325BA6A3541B37D215707D1B6A7FE990
-:10C7E0002CDC5EC33FBC8FAECF353F89E738743158
-:10C7F000DA7A7F19A59C730AB1AF543ADF60E57A03
-:10C800006243AED18774BDA198DB592A1FABF247B2
-:10C8100085BF2A87D47B7EEF28F695514E5E3687FA
-:10C82000E4EA99E5786F07D49E7317C37B8956FABB
-:10C83000FEAE721FF194626FBDA7D85BFFA1D85BFB
-:10C84000EFA3BD05F986518308BF37142E76DD08A6
-:10C85000F31A902011DF143A4E4CC4EDAF71192732
-:10C860002C7DD96111D1A20EE3058F34F27B4936BC
-:10C8700097ED9815F159CF95F92C6B766934BBBCBF
-:10C880007CF2E37AD2D13EE4EB7B55B94F794C99F7
-:10C89000FF7165FE6F28F357ED8F4943BE32A1BC8F
-:10C8A000DF10AFEF477E29FC29A7D0B9A85079B592
-:10C8B00001C408E9EB2291FC9F2078E76AE4BD25DA
-:10C8C00020F7F54E59C9681EBFDB6076572C467CB1
-:10C8D0004E6614A79DE8AA27B96503B94572B3F857
-:10C8E0005CEB6CCA473883E59E518163B1CB5A8EAD
-:10C8F00072BE38464F1F5724A4D0BD5BD5FE0E1D17
-:10C90000F772F00C9567A682F55EE2F3FF47726C52
-:10C910002CE3E38EBD243AFD5CDE1C4F2679239187
-:10C920007C0AED5F95376F63CC6420BE4F64A1FB3A
-:10C9300000770A614E84E79D287C303F97D17DFFC8
-:10C94000C18A3D6757DED1014EA1B8CED84EB0F5B1
-:10C9500083F87AFC2553F71B6CDC8E8FD6E4279A7C
-:10C96000E235F54BACC99AEF93ECC335DF273BB208
-:10C9700035F9EB324669EAFFC259A4C9DF50305994
-:10C9800053BF4C2ED3E46566A577480E36ED1EFAEC
-:10C99000B11EFDA7B6A11FA7F5864FA1F1F00B0EA2
-:10C9A00060E1B5A38B67E80046855187EF4C86FCB4
-:10C9B000C6D19367E880EF0A071FFE3A195868D37B
-:10C9C000E8293C7FF5E1AF5320BF65F4753C3F8615
-:10C9D00091F0DC3A7AEA0C2FE0591CEA797434D0F1
-:10C9E000F12D97EA8FA23DF8C765D3E6264BF84EA6
-:10C9F00040596206CCE76C8AE761FC7E73ECAC15AB
-:10CA0000781176FC77F5748FED37A379BB8E8BFCAC
-:10CA10005D8D8E8BFC1D0DBBC8F1F65353F5BECB5F
-:10CA2000040E9A7EDF5F11647EAF05FDCD3969DCAF
-:10CA3000DFC414FD4D4CD1DFC414FDCD397AEE6F47
-:10CA4000628AFE2696A3BF89E95B4D32A5EF34B911
-:10CA5000286D6F7253DA7DBFE029E76A3D0A38EF2F
-:10CA60004F8B5B98C3E417114EA1E74A3AF49D4FF0
-:10CA7000D07ECA45E6C0FB1287224E3970BFAC3962
-:10CA8000CF44742E74B63B4CF0BD3097E79B2FB665
-:10CA90003B507E611EED9E8EE8B66C94BFCDB51600
-:10CAA00027EEBB355FF4C7239F14D61BE8DE4C711D
-:10CAB0006727C5E90A2DFCBD844311C78E28E39181
-:10CAC0005CDA7991F9457C27C7DCEEB02AE3603F58
-:10CAD000306E32EAB7C225302EF55BBF98FAA9B0A6
-:10CAE000748F2B848C6BFAE171270A41E3A67631AF
-:10CAF0007A1701C77568C6F54B743FFCA25FC27810
-:10CB00006147B4D38E714D355F8CDF21BF45CFDFD8
-:10CB10005F2C74F825D493B8BD89EF5BC681D833F8
-:10CB2000D3790D1FC965A84771B99D5D7C9D179A82
-:10CB3000FC0B909F8A957760C08CA57B9B4C0C73F7
-:10CB4000A2BE2891BE3B363817DF39E3EFA0151B94
-:10CB5000DDDB901FEB745CDEB01833DF57D0B5CF50
-:10CB6000FF15D43B193B98EC9504FB4B2C7504B492
-:10CB70005FE4CA44BBE3245B4F72687594E77F8F20
-:10CB8000067ABE31B35E50F427F5637785EFC0FDBA
-:10CB9000888E5786E5211F4D333A5E64C0BF7F1FE4
-:10CBA000DD44FC3C2DCA91872FACFD7DF40A9E8F9D
-:10CBB00073BC883783ADAC694671FC8F3F2F45F15C
-:10CBC0000D749AA70A3AB47FD4735376D1133606FC
-:10CBD000E054EBFACAC0E7D769C07870D41807C12F
-:10CBE0006FE06146E7983A2747F876E07EDF80FA03
-:10CBF0006C8C87B24C471ED64BD277D27DF28EEF2B
-:10CC0000F8FD27A819795350FCFE898392ABAFF841
-:10CC1000E3C931DC4E5D946A598778A8B39B4C9484
-:10CC20001EBC48E78299CE9D8AF16BD9D0F77BA9CB
-:10CC3000AF8EE1FA2179A54131024174C294E53009
-:10CC4000A6E6BD0CF4D0F6BBC3BADF8B037032434B
-:10CC50009AC8F3DE1D8F17EB34F565ACDFFD1DE3DD
-:10CC6000F4ACA7BDFCDBCD8F2F4F55C6437A99C7D7
-:10CC7000C87F0CD53B6B0B6DEA3B3F84E7C763CCA9
-:10CC8000DBE93D5249798714EA5A314E11CEE83D2D
-:10CC9000AEC1BF37FB9A819E769A393DA78A3CDDAB
-:10CCA00029F2FAEA3BA5EABB6BCF147A6E2BCCA330
-:10CCB0007EFCD48FB4371BDFCB88676D34BEFA6E31
-:10CCC000945A2F01F420092B5D673AE2AB5012FB16
-:10CCD00084E7E7638AE6201D5C68F2B24F82F4CDF8
-:10CCE00085F0C8C660FCD549DAF75A3F1F3381DAB0
-:10CCF000A9ED6B1B27B24F2878E9273AAA4D156991
-:10CD00001FBD4E62AFE23B9C20590DA897D576A778
-:10CD100040DEE278EF82FCC5F43D90BB9FE8D13E57
-:10CD20009D4EE9FB4D1E2A3FDD544D69A0A99ECAC8
-:10CD30003F6A6AA4F496DB2372917F16ED5FC63ECC
-:10CD400009A2F7DA36BD2710943F55D4371DAD51EF
-:10CD5000E8E85472DFDF9F1CC3EDBB53E3383E3B72
-:10CD6000C0DEC0F7DA802E975B6DFDDB1D1DCAFDAE
-:10CD7000AEA3E3F9FE65473CCF2F1FC3FD6E596498
-:10CD8000ADD8FEE87803EF3F45ACC6EFB28DF77B38
-:10CD90002A5DA477A47E35B1E8FE31583F16CA73E8
-:10CDA0007AF2A7AEE2DFE541BC5C9DAFFAFDB64288
-:10CDB000ABFAEE613A7FCF8FDFF7027AA7FED5FAA2
-:10CDC0006326703E0CADEF4BE5E7C943E1F1A9C224
-:10CDD000B7C4176867231F2407F1459D83F842A550
-:10CDE0004395FED6167238A71A153A0FE7E7EE07F5
-:10CDF000A32E847683E3CCB48F20E3BBCBB09E9D7F
-:10CE000082C22FA1FCA0BC63ACF283CA072ABD0F6B
-:10CE1000063EE3EF34F3758C95FA795F5859477BFA
-:10CE20006CC45D84D7837A2BEAADB1127F2F79B0C1
-:10CE3000D8F5CEEDC89FB1110E8C9196ACB2D4F757
-:10CE400025C73EFEAFC243950BFDC0A3171C0CCAFD
-:10CE5000BBC33F120E24E7508E23FDF621B74E8C44
-:10CE6000B1297617A7DFCFC7C86F221D7508661DC9
-:10CE7000DE7BE830F77D5FF0E878BE0E958ED61643
-:10CE8000324A07E33A87F6967BEA7ABAD7790723DC
-:10CE9000F9971AC6CB43F1ACAE2B48FE9DC179A9D8
-:10CEA000F0640CEC1FE827A1C642EFE8DD56E8E08D
-:10CEB000FC36F0D3CA0DAC67FD358A3E7B4C94F846
-:10CEC0007BC88A7EE92E17A49965991ABD4347CF7E
-:10CED0003A5FE1EF8AFB45568DEF72A36F1D1C1779
-:10CEE0001F52C8E543D7F43C11F7132FFCD542F786
-:10CEF0008B2F0CEA3C8DF6CE85563D53DE239B2AC4
-:10CF000080DE9D8B3E130CF9A5F29EF3E7E8F70E49
-:10CF1000837A6D174FA3BDB568ABC44C789E60EBA8
-:10CF200037B7203DCD7B454FE7999A5B371E477A4F
-:10CF30003CB74FC0E76FD9857D02C5316B5B227C62
-:10CF400066A85F0A79AC7FC76EC9C7E38B32C53963
-:10CF50006A94F13E31D7A5A05D3E71EB5D3A84FB4A
-:10CF6000BCED028B837E8FB4DE790CDF1D39B78D6B
-:10CF7000DF2F6B3647EEC0F9974AEB0C83A07CC1DC
-:10CF8000765E5E6329FD0CF743173CCD28FEB36047
-:10CF90006F04F98FF35AF41F0582EC8EEA6DDAFC08
-:10CFA0007CD666403A58B0535B5EB307F241F279E3
-:10CFB00050A1122F19CEB2295ED2C2E307AA7CEF8C
-:10CFC0006D5F7BB91C6D50DEFF667F89A5F70F5F33
-:10CFD000F926E9230BCF9729F93390FFEA1B8E1727
-:10CFE000152E75CAD85FC5B3DC365867DD2B662BA6
-:10CFF000FAED7507CE46E279B04561017A1799BD21
-:10D000002C59D1DE7B60BFE445F8D61E343F89FB46
-:10D0100098752F9E30603CA174DF62B2572631EFC5
-:10D020004AF49BFDA2C8DA898EDAE97D5F2677CEC5
-:10D03000C37E2E1C305BD10EA87BF94FC76EC7FC98
-:10D040008B02DDA7BC9018203A99B755A27B430C00
-:10D050002DB4FC1E3A9110AF88E7B6287A8FE50E02
-:10D06000C43BE219F0EE48463AE171D0794F4BF4F7
-:10D07000BDB9B5D980F5CFF9387E55BC974A4B0973
-:10D08000CF0B1EE7F89CB875D7E630A483A7F564EC
-:10D090008F1F817683783B0D1D185EE1FD5FD8C53B
-:10D0A000CF9177D3C10163371DE03C2F4707C0A75D
-:10D0B000A4F72F47079DE89792BFFFDDB9C7D00EB1
-:10D0C0008FE0E787D5771BD5771A072E3C7514DFDD
-:10D0D000E74AB3BF407677A5ED8BDAC58CDE099DB4
-:10D0E0005388E74B26BFBD02D17772CAB3D9142F3C
-:10D0F000D507766DC178437438C5C73A92CBB6E18F
-:10D10000FB98C5B66F93F6C23A16FDCE48E711EB11
-:10D11000157EC63F3C07A2BE4B0C78A7F319B50796
-:10D120008DFC5CC63EEDFBE11DF19CCE4B0C9D954C
-:10D130008BD14F80FE701C41E6FEE9C283FC1D4589
-:10D14000D59F5CA8BEA7B847FB6E83607D9BEA3D78
-:10D1500050984270181A37D68176797339F3840D56
-:10D16000FD217DC1DFA97C5CF18BFAB527FBD11BCA
-:10D17000AA1DC9BC21F7DA15B97547019FE3D1BBD8
-:10D18000DFD0E17B8C1D3BF9EF3BCC3F08F22A0658
-:10D19000F719F51AB953A7D4FF14E90FE076DE5B4F
-:10D1A000FF922805CB97F78BB19F9AA7793F7548D7
-:10D1B000571457F56F0E83FEBE6CD333E497054CBE
-:10D1C0009137FB23286ED44BBEECDCBE12CDF7505A
-:10D1D000BA5A0876262E2294BEEAF669EB3D5DA87F
-:10D1E000EC7B0E67D7E0F9FFAF31E090D7235FBA51
-:10D1F000DFE9678E28E4EF6E7D2868EFEF0F6B059F
-:10D20000960FEA77B8CFC463A44AFEEADD564DFE16
-:10D210009A36BBA6FEB5FB1D9AEFD9FE0CCDF711D1
-:10D22000C79D9A7C5E7B81A6FEC8F7644D7E54C084
-:10D23000A5A93FE6BC5B93EFCA84F5F461CFA8E9EA
-:10D2400024BBA0A93FD961D6F47F5D46B426DF6533
-:10D2500051E0A3D899AAFDFBA7426EFF86A62A7CBF
-:10D260007FE1D48EA3FAED371468C72B93B5E35D45
-:10D27000295EF01D419D9EFF7E02A6F8FB09BA348F
-:10D28000FEFB0998C7DF4FC0147F3F01CB7FDDE471
-:10D29000A4FCBEA602CABF047E09E6F7839F82E90A
-:10D2A000CBE09F60F9E5E0774C19F7B832EE1BCA86
-:10D2B000B83F154E6F29FDBDA3F487EF0DEAF43D8D
-:10D2C000DF6B5D79E225E0E322DB67745F596E086E
-:10D2D00094621CA3F37589E1F967E6F11D6F8A4139
-:10D2E000FD3680A19DC4DC9D6FE23E6EDD8B43ADBB
-:10D2F00078AEEF81FD7F7807BF5FD82751BCE6F09D
-:10D30000FEB391D8CF9797C2E9300AE945C8D77CD8
-:10D310002B507E0D7CC7736793F74ACABB676DA419
-:10D32000EFBE4C55F33EBA2FEDDEB3D780785AB836
-:10D330007B2F7D7F1DF85AF37DF776CD772BD6872F
-:10D3400074A1CE477185CFF7ABFDF9A97E4D2A7F39
-:10D350003FFEF3DD47568E417DBCB76A00C6B51768
-:10D36000EE39113BFB07F0F1D54BCF66A21EA83D6D
-:10D370002029E7D1787FB507F44A9ECFBF26756F85
-:10D38000299E37637B04BAB3F4255B4FE7C416EEDE
-:10D39000DF5583727661C6ED7A8A7FB5494ABC83D0
-:10D3A000BFD3506365DCAE6BFB3A12DFA9FF7DDBB8
-:10D3B000D1EBF11E74C7C123F45E4CC73E49E34F65
-:10D3C0008D1DCBF13B762CF7FFBEDC772412CF0905
-:10D3D0003ED07684C35DE7A7F51F56F21D9012BCC0
-:10D3E000F74BB4FEF99724CDEF01B8C071A1FBCD86
-:10D3F000FBD322705D27DBF878D3407D50796AD566
-:10D400001C9CFF1BF6F23CE57D32FADDA18EABAE33
-:10D41000DB857276619BD4E779F739D82FCCEF980A
-:10D420009ED3E9EBA92F1C1B04707FC335209B748E
-:10D430008452AF622CD79BA5064F2AEA91931647D8
-:10D4400004D2F9FDAEA11188DFC39862B9EB49BAE5
-:10D4500007BE601F1FEFA4B53D12E9EEE4BE1152F6
-:10D46000F0FECB2DCA7ABAE9BB1B6F5EC253B56F13
-:10D47000BB05FBE9C11F2F9F36D64AF5DFF09DB8EB
-:10D4800005EDAC9319FCDDC0630646FEF5C23DDC3C
-:10D490004E3E7970F0F6E0FB59D3147C7464F07D55
-:10D4A000F50BFBF54ABDDB77314D3D3DC7D74EED62
-:10D4B0007CACBE330FA17D5EF3B844671D6AF4F502
-:10D4C000B1B8FE4FB769E757ADC0B946EF8F8D0DC4
-:10D4D000A2D79A03DD7C63213A3FA0F28983F0A9A9
-:10D4E000E2F16486C4E765E7EFF8D5ECDD4574DD6D
-:10D4F0003BBEC4E3B783EF313929BE74197F5AB5F7
-:10D500001B82FC2DFABD23BD6B689E98D2631F9CC5
-:10D510002E941F1A9B877E989BFCCC930CEC5B1877
-:10D52000B316EDEB28FA1D89CD386ED73E3DBDFF11
-:10D530005F6B3AB000DF23EF7202A3C0BCBBB6E959
-:10D54000BBDF67463B779E62E77EEAF0E44BA07F55
-:10D550006B9789B4BE9A3D920FCF175C50E4DE57AB
-:10D560007B936F407AAD392E59D13F9AD896FC7093
-:10D57000612EE977B257EBDAB89D5CB75B20BB58F8
-:10D58000B5436A153BE49C62079F5BD6C9EDE35740
-:10D5900004B611EAAD0D037B04E65D9B3985ECDA38
-:10D5A0005A69DDCAC10E3C47A5B51BE61F3C44E7DE
-:10D5B000AEC0CED1942FDCADCDD7B669F3AABFF8FB
-:10D5C000D2D86E3B6338FA372552611CF2C39B0AEE
-:10D5D0005E557FE7CE6B9CF4FB270FE81C53D4B855
-:10D5E00004C26BD12B2FCCC779FB6AC29CE47F3479
-:10D5F000FE96E0DAF117EED774E0DE1BF233E3F0CB
-:10D60000EDD8CFE97C915EF0E1EFBA2C425D81FD6F
-:10D610009904DF328C3B7BBB22493E29E7081ACABA
-:10D62000B9FF2A630C18A6B27E2CF7E743F5EA3857
-:10D630005D408A0E921381B12954AFD8C0CF57DE16
-:10D6400019E124FD36C4C4EDF521266EAF0FD17566
-:10D650002EA3DF851824F07D8EAC9769FF606D9D49
-:10D6600085F617047B950EE1B17650950EE97D881D
-:10D67000B52D03FD3A355F8CDF337BEC83528B474E
-:10D6800087E3EC8C17947D04AE4FCB74567D749079
-:10D690007E656C99667EEA3DCC9F7D7E56989FA5FF
-:10D6A000677E80EF286CFF75AE93EC86A432F5F7A9
-:10D6B0001AEA492EA8F0FC12E8BD187045776C8173
-:10D6C0006E6AB61D22FFB296B5AFC476A5917C1DD9
-:10D6D000A506FEBE5169184F75E3B8FC2A51D2A5C4
-:10D6E000E3B4F6C39171B27E1CA43BC6B94DE3F21C
-:10D6F000683F9579617D0D6FF377D643E53E9413CE
-:10D700003D7D0D7C88F26F46BD604DD5D8699CBFCC
-:10D7100016F1A26E3E5AF8F693C427EA39CC6AC6CF
-:10D72000F97B66A3D99A1AC4178B90DFD0DE77C332
-:10D73000BF7C8C13F0BF6AEB7C3A97E9698CB5A289
-:10D740005FB748FA92F6257E2CDF2DDAAFCDFBCD00
-:10D750009CFEFD1102F94919E3BAE30DC48F490A91
-:10D760007F6CF708740E60FB773A1ECFAB10287EF3
-:10D7700077331436DA944962BDEA22BA4F7233E342
-:10D780004763594B8CF2BB3D31B46F7993B2EE9B3A
-:10D7900075FE4328578EEADB92319E74B4D6E4C4FA
-:10D7A000FECB591BBD6F5AC1DA293D155EF7A29F0A
-:10D7B0003AF72622DDFDC963A478D6F6E53B225070
-:10D7C000BE67B1E556DC4F0450ECC6B701FBB3733E
-:10D7D00042F71DD5FBC4602FC7217D02FE27211D06
-:10D7E0009C07DCD8737AB75FF8C71723117F5F2CCB
-:10D7F00079E1965B19FA5F9DE4472DA85F46F75DD6
-:10D80000819CDA33F27BF0AAE25DC55B375E1DF0E6
-:10D810002F18AFB0A6048493F46519C9A57F91E8C9
-:10D820009CD6E5F0AAC27DBC829F3B0E70F9158A9A
-:10D830006F150FB7E2BBF54349EF6E233C3123C9A7
-:10D84000CB507AB81CBE8030E93CD9C41823F9A16A
-:10D8500083452E4F07CF13285E793BF3BC1280F42B
-:10D8600096F0F7F5FCDE0AC75B8582B73F31DF2F04
-:10D870003292FF71783B32CEDD346E606FBE0DE5C3
-:10D88000D3FEF8B2C6E1FC37555FFA18F263083FE1
-:10D8900087F06B371E9DF02F088F9EC648E2CB6E37
-:10D8A0007C4B7BAE4C2FE27F308EB55FF0F993AFAF
-:10D8B000805F0546BFBFF8F838ADDE54F1A6C2A5BB
-:10D8C000BFB8E007CC7FD42AD0BE0AE7E3BB8D7493
-:10D8D000FF43DD5751F74F5E19C7F55C68FA01D871
-:10D8E0004BB85FB526E3E440B4334F19D47EF8FE5D
-:10D8F000EF07CBDA13F1F7B63E28E2E92903FFDDA3
-:10D900000F352F87F1B8E407F1462FC2E90361F81C
-:10D9100004D4331F08F75CCFF3710607E6CBE32688
-:10D92000E03D90537A358E79BF127FF0F179948F74
-:10D930002CA67A02FF5D4A07FEDE1DF62B0836177D
-:10D94000CCE783BBD2E87D9DEE7D8D71DC0E7F46FA
-:10D95000594777DCFF5E81E2FE335135E1FEC48436
-:10D960002D2E7C87F3F47D43B369DFB4413B3EEA5F
-:10D97000FD648A976EE0E7FE2E75EAAB82F45BB732
-:10D98000BE2DBEC8CBE7E4D1EF8CA8BF4727DB860E
-:10D9900073FFDCC77FDF50D5675DC75FB004C77317
-:10D9A0003F53E2DFDDF9E10F2605EBC3434FAD4DF9
-:10D9B000C77EAA0DDE2CA7057F87EEB124B45BAA33
-:10D9C0009F5A954EF6F4530FA4A35F54BD636DBAEE
-:10D9D0004CF9700FF9653ABEEE2F9E1B45E7F3D464
-:10D9E000FEF6CADCAFA8301D2A41BD3DE5EAAF56C0
-:10D9F000E0FE41DA7D02C5FF66B0F615A8672B335D
-:10DA0000385FB11613C97FE88FF66B770DFFC54EEF
-:10DA100094076F649CD5CF817A123E203510DFD5F4
-:10DA2000F2ADA3DF095CCD7F27B0A77E22EDFF56C4
-:10DA30002D17E89DAB19F5FC77F3A4F1D104C75974
-:10DA4000ABB38FD1FB574B79F914A36FDF49EC6768
-:10DA50008B81DF3F64EE94E0FB7092B25F38739D80
-:10DA6000F27B71CA38699B63B707AF5352F61D59F1
-:10DA7000EA7724DF6E50F03275E98957EDD0EF5424
-:10DA8000BDC73C1EBEBFB3E95CAA9F611CF4333A1C
-:10DA90005F9866F03C3A1FD7BDC34871D2DCACC179
-:10DAA000521CD4CF5952B411D3994BAB1E9D8F72D7
-:10DAB000B8D594CD8F35F2F935084E11E5F491EDD6
-:10DAC000B7CE42B89DDFC47FFFAB61FB30FADDC249
-:10DAD000FEE4DEAF9AF8EFF93DDD64A2F4D9262B1F
-:10DAE000C3A3EBCF35D929FFAF4D0E4AD9F43CCDB6
-:10DAF000EFD8F4D7DF884BE1F4BB73B9ABCDF43B7F
-:10DB0000880D4639753CC02BEDAADA1D0F28EBC2F3
-:10DB1000F7B8B2BDC913110EB90F2C3E86A6B37566
-:10DB20003CDF977DF3E4EA2414D6772C3DF3C47CE4
-:10DB3000F87EFB78F7350827D3B68B14A7387260C8
-:10DB40005525C2BB7A8791AF4F59F7F94DE9718FCF
-:10DB5000627CF9753DC50D166D3BF3C4030C7F87E0
-:10DB600077B12198DEAF74BD578FE77EE6E5F8AA5E
-:10DB70003F38FC78BE5A9B44FCB303F82AF3A7F362
-:10DB8000D5A2A5CB087ECBC6BB6F42B89DD77B93F1
-:10DB9000909FCE0F1F4B74EE7D4520F8AB72BCDB1F
-:10DBA000AF56E0BF506C5B5798DC23C7BF61B90428
-:10DBB000DF43073E4D47FBF99BFDE53FB8EE97601D
-:10DBC000DDFE6118AF33511AFA3DDFE019EA84F542
-:10DBD000E5F7F33EE8D2F16AFC9F9F53C03F213640
-:10DBE000F89D21E68D82F9D41C14FC6159A8CF263A
-:10DBF0007DA643BF11FCCF8F34E78C19FB28489FCB
-:10DC0000F737DFCBA575D84F5A8FDC1DF99EC8FCBE
-:10DC1000417A7B54208CF983C6EDF673A0CC40FB8F
-:10DC20004EF12417106F782EECC281E13B30FF9942
-:10DC300081E3F1C24B604FF1781093F27BD6F9D9B2
-:10DC4000812FB250CE86AEB7EEE52F883E6AF6AF92
-:10DC5000BA28D0FA277FA6CBBAFCFA0F3DF54516B5
-:10DC6000E2EF337D201FFDB60B864016E2A1EEB732
-:10DC70005C9EFF5838A8E5F3571BE8F73AEB04130E
-:10DC8000D14989F425C51F2E1CE7F187BA034F92AD
-:10DC90003CED3AC8E3408BC4F6D2388C9BD49F3914
-:10DCA00086F2ACCBCEFD31E89FDE712B1CAAE84199
-:10DCB0005D6712DEF73BD84D0FDC8F3C8FFC3B0CD1
-:10DCC000FB69A3F3BD2C2B9CA15DF139F2F3307CF1
-:10DCD000BF307925D2F979DFC01C948F6F66FDAD16
-:10DCE0008EE286BF0FA77BB2B56D92E69C79F73ABC
-:10DCF0007C123F70C454FB299CC9C1E7B90C8E1B30
-:10DD0000C86E7E83EF132EBA8AF3137B99F353ED1B
-:10DD1000F243067B507FBB157E52EDC829BFFF1B27
-:10DD2000F1E5B38532FD04D54FA5C7FF9FFEF74C43
-:10DD3000FF2F4133EC630080000000001F8B0800C0
-:10DD40000000000000FFA55A0D705455963EEFBD2F
-:10DD5000FE4927DD4913421208840642881A6203ED
-:10DD60008172D6C4E9FC6E2033BB016B2DC4088DD3
-:10DD700022249D7482E8EC6AB96E1A02AC6475368E
-:10DD80008C59471D479B9F8028EC769440C0A00D7E
-:10DD90000ACBA26B45AA263A555B54ABAC0EE0A663
-:10DDA00023823BD6E2B8E73BEFB5DD1DE24FEDA69F
-:10DDB0008ABA7DEECFB9E79E7BCE77CE3D8FB45247
-:10DDC00022CA226ACFCD082A0AFFA66EA245446D58
-:10DDD00029247FF641451FAFD364BC7D40A3C958B9
-:10DDE00093EB08CE9E415447DD269A45B4844265A4
-:10DDF000A471BF29F2CB5B79BCFE0D6D4117936115
-:10DE00001BAD6AB013D5A67A0B3614130DABCAAA94
-:10DE10008662CC0B952E9D4BF40DFE7E4A749B873B
-:10DE2000994F222AD3140FF61B9D9C16DCC95D8BDB
-:10DE300097FB1B494D98A7EAF3984F53087C82A3A0
-:10DE4000254B1DD868B46499233EEF8E37D2D60790
-:10DE5000314EA1D23B12F6F94B8F856821D117CBF9
-:10DE600017AA0F65F279AEDA037433518D76ED2976
-:10DE700085F7DD70CC4C5605FC67BCAFF239026704
-:10DE800034EA65FA52470A79ACCCCE4B1E0FCF1B51
-:10DE9000993B29D8C5E76F3FA09089E7B51DB1EE42
-:10DEA0004CE1796DE648B69BF7DD36F03B8B87DBBE
-:10DEB000F6FEF72CAEB958CF4736439E1415FA6DCF
-:10DEC00077F24F17917F60CEFB77313FFF694DF4BA
-:10DED000ED37BD6721D6D7059E8FFD5A0EF6D58248
-:10DEE0006EA5F05627DAFD3CAF48BF9B6FF8DFE523
-:10DEF0005C5786B3387EBEF8395DA2A718BDF869B5
-:10DF00003EF702D68B46EB437659EE21967B716E37
-:10DF1000CE8E2E25719DAE5F8F76694B0ECB159DF3
-:10DF2000A9B81566154D0D6C76421F858AB39717F3
-:10DF3000475F7FB9742DF49B122CBD9DCF17B59010
-:10DF4000DCC7E2C7B69BB40479160F6A1EDC433403
-:10DF5000959A0EC9BD7BA7E23EA8BC61A96712D6FF
-:10DF60008DBE7B2B6F195579BDFDFA7304CA757987
-:10DF7000CEB0A9C97D1B72D7E7E5ED80FED900C4FC
-:10DF80008E4EA9FAFE1E95C7E7C7D7BF689CA74665
-:10DF90002BCE89F0F806C59DE31C679F58BB87F51B
-:10DFA000BE86EFE945BE6FB42F753869CD6CA2FD12
-:10DFB0001DB942FF73874BDA504791F4BFD2E11687
-:10DFC000FA60C72D421FEAF0083DD05127EDD18EEF
-:10DFD00006E93F0351FF8C70A020ECE2147C6D4AEF
-:10DFE0009C1ECE1C434F499E3F9CA924D353149999
-:10DFF000FF70B83C1860FAA532A79C938DCAD1C0B7
-:10E00000FA684E4B2FA10CB4F9414A67BBB17B03B0
-:10E010001EB6FB3FD4EDDA4333C5CF4B30AF3AF3F6
-:10E02000CE46F8DBE52C2B69ACCFC31EEFDF63DEF9
-:10E03000E9D35505DBD13F68735BF9FE8757DC9464
-:10E0400001BD47FF4D238DB7AE285AB0B994E90AF8
-:10E05000BB2276CCFC6E6EC866BBC64FE65335B8A5
-:10E06000BAD4A4E38473B602FDB7AEC13E1B26DB6F
-:10E07000165879FC4AB9F757D827A6F7DA29EB0AD8
-:10E08000BCD08BD9F5BECAF302FF6EA65E9EF780A8
-:10E09000C39D64DF47CB2B82B09BC545B336CF070A
-:10E0A0007F76BAD9BC3FBBF57EC8E751D3944EC149
-:10E0B000319709B810C4FDF33E952E45EC306C71D4
-:10E0C0009932997F38B5222BC0EB4E19F77DDAB81B
-:10E0D000EF33C67DBFC3FDD5DCBECBFD6887B81F5F
-:10E0E000ED8A989E4DA385D05FF0A70D2F7944EF60
-:10E0F000A3F9A0A3665A0E3B5C023FD3F127BF8170
-:10E10000E578A25C97E36E037F866E6BE8D3D785D4
-:10E11000844F8B85BCB0FF4B589F609FB175F1F564
-:10E1200024EDB29B2990C2E7A0C3B620F4445389E2
-:10E13000805FCB0EE7082E6929B38ACF4F647A013E
-:10E14000099ED2AB567D5EAE6B21FC857524FB8C9F
-:10E1500004D58099EDC49F395498C9F28E187E1663
-:10E16000A30FFD4913FCF6CF679ADBD714FD7CFEA5
-:10E1700065438513B05EB1A9B033FF4E7DFCACE1C1
-:10E1800087FE99063FE33C9412CAC77D448F1DCE9B
-:10E19000BF87E92E7B78AD1E07C28582DF142E5C17
-:10E1A000069C5442E7C84DD477FC7DAFE927D047A1
-:10E1B000E879D0FDC77FAFD34ADF3967E2F8A450D2
-:10E1C000BEE204FD8141F73D3FC19D409B5F398721
-:10E1D00071CBA6DF7BAB27336E5883A73B6037FF3D
-:10E1E000A2DB97ED40FF27D05BCB112BC12E2B0F6D
-:10E1F000F47FF60A8FB7F43BDC80FBA86786E8BBA8
-:10E20000F3C8DEC7616F237D66F187AEFDBF7BFE7D
-:10E2100011996725985BBD35544ABCCFD1E37FE3A4
-:10E2200035619FB4D015D06F579C1739EA27EAFEA5
-:10E230003D54F1A93700BDF51FF86BC4B5FA0C0ABF
-:10E24000C06EE965BE4766E47BF5866A2AE171C760
-:10E25000D04AF06F7BC9EA869DFA5ECDA9841F5F24
-:10E26000F3CC14FB6BBEB13B1F71573DBA6FCF238C
-:10E2700059986723C8DB9EC976C47AF5693B16DDD9
-:10E280002FF7B76BCF6F20F73E1BED643ECDCC036D
-:10E29000FB35EF991D0CF0D15EFBFAE395B8871AB8
-:10E2A000EDB93DE8BFB2DBA6420F672D9E8C72F838
-:10E2B000E159B3BB17EB0CBA7978A22E4F5AA4568A
-:10E2C000EE2FAB3B1F71D737F1E1BF80DCF55AF77A
-:10E2D000F3CFE23C7BAD843871611FEB8DD75DE8F5
-:10E2E00035CFC72D8FEC7398602F9794EE95CF8222
-:10E2F0007FAF3EEF92AD5BF419E89D43D88FE711F5
-:10E30000E2F225657B52FF85DEBD255ED6DFC5972F
-:10E31000EA8BBD09F61BF317DF6E6B527C14246089
-:10E320005CF219BFC919203BC7DF6683BC78E89946
-:10E33000916729BEFEE27E73D8C23A6AB6D2E694ED
-:10E34000CCB83FF8F2FEBC0EE7F3A93B0A91C73404
-:10E350002F88AC845F5CB0514A2ECF7BDB885FBED8
-:10E36000831B972A25DF2D4F4D85EEC75773F53850
-:10E370007675C0160C28DF1D8FFEA3839CEFCC8E14
-:10E38000D377AF677E29717E6F5B42AD6EDEB72DAE
-:10E3900053C78F733C7F3FE35895B1CFAA8792E76D
-:10E3A000DF529129F6D3668914220EC6F82FAC8865
-:10E3B000E15AA4107835765D3DD213E0C8CB8AE0EF
-:10E3C00088EFA0F2A1966EA8343BAE4F5F4A20A81A
-:10E3D000958C7F0FB98B8C7B605EEF55E87EE5DB1B
-:10E3E0006FF3D8984F4B6A241D7953AB23928E7CE0
-:10E3F00068E4A8463B8DEBCB8AF19F19DFAF494615
-:10E40000B83F64F6D8C6DB8F8F433C6F1D7EB32ABE
-:10E410003EA9D0FDA669204DF623676411ECB6E94C
-:10E42000B9E47538A733C11F470676657B13E28FC1
-:10E43000CF903BAA7C287E13FDFAA37CD8814FA500
-:10E44000CD0AABF622AFB1650A4D293A1DB0B1E550
-:10E45000FBBEB4A7C27E2E5E6D153F1E5122827395
-:10E46000B927AE0A3E8C982382738ECAFF11FC181E
-:10E4700099105909DCCAADB4AF96F1C991952E1E19
-:10E48000FFB2C2A0A791E40385273257034FEAB534
-:10E49000D1B711376997D9093F89E97B9DA127A297
-:10E4A000C7863B78FC0F41B30BF1614EA562E40BCC
-:10E4B00096F8F9B5B83F8D90EBC041F86793DDDD74
-:10E4C0002BA3C1FDAF201FBC33DBDDE5BA5E6F328D
-:10E4D00087E5CACAFC6A2DEE293BDDFB8F15CCDF30
-:10E4E0005F1CC907CEB1B54B1C6A7BDDBA13FB4775
-:10E4F000CDA37B805F171CDE272B589FAD96A1AD67
-:10E50000A52CD267E6C829A4F84B606F8223BABD58
-:10E510008D14EFB2089F1E562AEB6797710F944B2C
-:10E52000B403F6A1E8F7FCE6C0ABEF006F468666E1
-:10E53000094E8FF5A70B034FA603373EE0F81E9850
-:10E5400013EFFF60F55E0BFA97BFB8C312E1F69EBA
-:10E55000CDC9E7BB7CEDF60CF80B3D9ED00F7BECF4
-:10E5600049A6C7EA0576194EF28380E8FD9CC729C3
-:10E57000F2B7540EB5410FDFD2CB98D612E8136331
-:10E58000E831F3A941CF1FCE7948F8B64E0B0F43BF
-:10E590006F2307CC047CEFE4B826747F5A10EF1A7F
-:10E5A000F500C7AD2C3D6E215EB4A40FADC4BD8C8B
-:10E5B000F45B9D98BFE9C8A7F9383FDB633ECEDB2B
-:10E5C00072E47036C1CE8DF704C7C76C8CB7F41FE8
-:10E5D000C9C6BB24D6DFAA860A211747B812E0476E
-:10E5E000ACDFAF850B217F8B325482F128E496F9A2
-:10E5F0004C6BA049CED1AAE87E4F4734C1F9B1F7A0
-:10E60000F651856EAF8C0F25C807371DBD5412B16A
-:10E61000C7F1A0D9C09513E82FD6FDDFB9C8C0094E
-:10E620005EDA0CBF1F0727BC31DCA3F516C87DAE30
-:10E6300042973BB65EF8CA3B2320E36DAF5D2A9953
-:10E64000598C75C63C4AC0A359717C010EE40A0E70
-:10E650006C3267F3B97CCF2BEE4E5ED2DCB8B1964C
-:10E66000A7D33AD3FDB5D06B1305E45D3756AEB1F1
-:10E6700076F470857EBF3E557F8FFBF628C14E969F
-:10E68000EB22637DEE7CC19B30F0675DF5C65AF8E6
-:10E69000DF7D597E4BE2BBF987F8AFED49A6D7ADD8
-:10E6A000DF589B338E9FFB1EDA7E6A125DCFAFD997
-:10E6B000BBA336DB757D7F4CEE8BB6989C95E64907
-:10E6C00089FA58BEB17612B7EB52FEAFFAD0CF7DC1
-:10E6D000F188358CB8CBFAB5E0FCB7FD71BD2509E2
-:10E6E000B77F805F33056B9D33BE5BFEB16DAB12B0
-:10E6F0001E56804FEC5FBDE267EC3709FB6DAA1830
-:10E7000053A7685A3D1D793779574F4FAC538C6DDD
-:10E710001928A7A8B788BD49CB7EB8D23D8E3E62E6
-:10E72000F36FAED4649F4D861D4FA96F79E6151E19
-:10E730007FB9CC5356C97E55AEA992BF8FDDA7A62F
-:10E7400052CF0F86B21DBF803D4507CD4EF849B967
-:10E75000A6EB334FBDFC2EFC312FDBE1EA647E35A6
-:10E760005569FABC633627EA40D1635FE57BE0FF79
-:10E770005BECCBA5CE62B2D3641E3F953B57F03D18
-:10E78000B6CFC7C63E69A57ABED35E64FEFE3A53D5
-:10E79000B1E3DB3A93E41BC569C1D91287BF90F896
-:10E7A000161D5CE8D45CC0F7A01DFED6FEF57F67A1
-:10E7B000230E8F0CFE67BA0BB875EDD374D8CFB6A5
-:10E7C000818FD3810F27066639D09E1D7239D01FE5
-:10E7D000ADFBB816F3BA8C365E67308B9CB136F65B
-:10E7E0007E8ED51312DED1CDD06BAF73DB2F4B6194
-:10E7F000EFA9DD8263FC8ECE44FC88D7195C39E337
-:10E80000D56512EB0C05B3F53A035AD4190ACC7A44
-:10E810009D0134EA0C685167403FEA0CA051670043
-:10E820008D3A0368D419D0A2CE80FE2BA86BB1BC60
-:10E83000514EDE50DFAAD1EC82FF0FF46A41E4F5BD
-:10E840000F1CD3747A8712C47D7FC6FB230E46AF9C
-:10E85000E875B028C75379E71F34CBFB201ADA5E7E
-:10E860003713F7D6AFB97155171137D914DBCDA3CC
-:10E8700027511F6AEF53DC1B5DE85F2E726C1B5C37
-:10E88000F87E23FA7BCD6ED585FBBA9A8DFA976F09
-:10E89000B057EA58D539C72C72CFFB15CAE1FDEF46
-:10E8A000B0EAEF64BFC6BD2CF7B045953CDA6F1DEA
-:10E8B00092F74BCB8B8A734D421EDA7ECBE78213E5
-:10E8C0009DB6F49D90D71FB239D724C5578FE47DEC
-:10E8D0007EFC74C18D3C43454CAFD5A790DF5E7B79
-:10E8E000013821F948427EB4D6D9FC33E467A45DEF
-:10E8F00033E1FC7E7EE84E64F9D63D6DFE2892B091
-:10E900007F733099F60DF66DCD23C899DC8F4A03DD
-:10E91000E2B23F94DC1FAA74647D92C63FE6D13C0C
-:10E92000E45B75FFB4E6403FEF77B9DB2AF9CA61D3
-:10E930008FF77025FBF149B347EA2F278FD9E4BD44
-:10E94000757EFB9CA4FA4B8D3655EA1F1BCC8AC4FE
-:10E95000F12BE5DE63B0CBAABA7BA5EE5295EB10A6
-:10E960007F8ED9E1D1F28637C077C35C97D4BF6A76
-:10E97000ACF40BE1C77E2FF73C68167FABE95482FD
-:10E980002AD3ABC96D817FAD62758A3D99ED8F2920
-:10E99000EC0FAB78AFC604BBDAB05D91BC420A1095
-:10E9A000ACE795863E570DFEEB570AFBCBBD563DB7
-:10E9B0000FCE5355E19FD7C5718BE7DF475E0BFC48
-:10E9C000661DC755B41C675F8F70BF376D6ABE9EEA
-:10E9D000E7BB72C07FF51933014F6A727E5EE8951E
-:10E9E000785FEDFC84EF5B09DFA57D73D3F7E1A8C9
-:10E9F000893E49C86B4F9A75FC617DCA7BEB14EC6C
-:10EA000055EA3E5E69CF743449BBA28CC4FF0B3417
-:10EA10003D6F2FE0BB72664ADDA20FEB6BDAED6E45
-:10EA2000E83F860BBB8DFCBE40E596E7ED4ED55B1F
-:10EA30000BD329DC3F8D5BCA147E61E77CD4715C0B
-:10EA4000C23F4F3DBBC0057D7C6977431F3539C749
-:10EA5000E6E1DD31CBE0FF7259C355DC97279D021B
-:10EA6000D89F8F43DDACDF5A1C48415D3DE4D15057
-:10EA7000273FA638F1AEBF1E4FB76F71C2CF0A1441
-:10EA800027EAB7B5A9DD35D9CCBF76E60C37F09CBF
-:10EA9000F155EA6123DCEA76706B5053F4B5A66C4D
-:10EAA000D4F30DFF29F7A6544D8AF7D71B7E141D0A
-:10EAB000FC221DF1F547D46D77837F806CEE5E8379
-:10EAC0003FECA0FEA66952BF8DD9D1E5FD393B616F
-:10EAD0004753ABF4758D8DEF99914F0CDDE6CDC1A9
-:10EAE000FE2BD77CBE255BCE397EBD8C713703B83B
-:10EAF0003BB65E16C3F13D46FD1D786B32EABA2681
-:10EB0000A3AE6B32EABA26A3AE6B32EABA26A3AE44
-:10EB10006B32EABA26A3AE6B32EABA26A913AE97D5
-:10EB2000F6DD8E87A41DEA08C87842BCB8B9EAC7EA
-:10EB3000D55D17558D5377A5145786C45DF67BBDFB
-:10EB4000DE3DA6CECAFEAE26F87BD5E0847B1E4312
-:10EB50005ED26371B338546BF1163C60177CF0548D
-:10EB60008D5B6F8DE9CF2EF5D9CB649B8F7BA82C65
-:10EB70009A655251C734EE2356EF84DFE09CF01BB8
-:10EB8000B4F01BD3ECB8DFFCD6C2AE5DAAE7090136
-:10EB9000C9136C72BF5B3732AE307D2F399370E58D
-:10EBA000B331B8C20F9A159063EDA095BA743F23A4
-:10EBB000F84F25377F9C3F0ECE84749C99961ADAC5
-:10EBC000877DA6B5A5BA9117B3BF8B9D9DDCA6889E
-:10EBD000BFAFA106D9771CBC49479E7CEFC4D17357
-:10EBE000BFE1F9F7FE835DF29DAD93D72EFAFFE00A
-:10EBF0004D4D95AE8F5F77847DE75996EA54B643C5
-:10EC00008E57D5162A92BAB89A2AFE50A33DAE580E
-:10EC100080A377D33CDC77B5B5E139C899C3FE2E24
-:10EC2000EFDF2CA3BE6B1A6ADECBF4D9EC3C37BE07
-:10EC3000AB4DCD3D44050B804775C5B0ABB3D4ADEE
-:10EC400060DD6319DEBF83BFDC5ECCA756E3FE96B2
-:10EC50005397B6B34BEE63CE42DCFB32ABAB1FF542
-:10EC6000862D6F9E907AC2B20CD742D41BB6BC7967
-:10EC70005AA7735CFD8A1BE5B213ABAB7F82F866C3
-:10EC8000EB3E9F1067FDA1094974FBC0E4EEF30958
-:10EC900071AE053FF89D4E3F534CB8AF5643945C60
-:10ECA000D5BB1DF2F9EBFE4B7FCFD3A8C4C9A7AAF1
-:10ECB000745C9C7482C2B0E7D1C50EF9FE973371C3
-:10ECC000FD3CD4DBA8D8B510F338AFFD35ECF8E245
-:10ECD000AD9EA7C127CF38770EF1793558C7900D73
-:10ECE000ED19E3BBE429D5DB88B6363D60927E356D
-:10ECF000588AF66D35F420FAD92F76814FED93F3CB
-:10ED00006E2C623ACF1A9AB7DE8E78E9D98DFE73EF
-:10ED1000659E5EEC37B6EEDF699C8FE5D98779C3D7
-:10ED200085AAE4F9C337EA6DCC2EC2553A0E1D37D9
-:10ED3000FCA8AC93E4FBE758FB395EA51A78F9FD13
-:10ED400072B3BC47204F4C7EEA5E5D0A7958DEA361
-:10ED500086BCAF619CEC99528FF96E7B0DC87EC763
-:10ED60000D3B657C6C39AFE3A3B485A6E004E40DEC
-:10ED7000531E0D4E80BC53768CDA5CDCBE1018B589
-:10ED8000217F78E16F476DE87FC14375E3E1BF56AE
-:10ED9000AD09DFC2B251593F9DF71A9277C2E8041C
-:10EDA000E46F854D6F59026CB7739EE67D93F2B7A1
-:10EDB000228963D30D5B9AFEA84AB087E9CF90E41D
-:10EDC000AB549D25E3BE14DDFF7D8F3EA8C28E6E41
-:10EDD00008B2DC09F637E769D3E54812DFB0AC6B5F
-:10EDE000317083F3B5A4713F3347BE3CC5C023E403
-:10EDF0008F8D8C37FEA6B7BE42BEC879DC187E8CDC
-:10EE00004D311C26C45DEFEB1117FC2079DEDABB17
-:10EE10001ED98AF76D53E3768BBC8FD7F46D45DB33
-:10EE2000DAFA9E258724BF4C9ACFF965127D9D9C06
-:10EE300063E4687BF0F3AD39E3ECCB76702DD10E53
-:10EE40004E9A4337E0BD7AD29FEA0E481C09DD0F87
-:10EE50007CD9D96A7723AEECFA55A5D8D7B7F5A9EE
-:10EE6000328FA9FA47D951A7CC0F545211FCE6872B
-:10EE7000DA11E0E1EC243C0C48DD72894370AEDD30
-:10EE80007807B6AD714A3E12F3EB3653E8C3AD983E
-:10EE900097E590EF110CB745A62C7C6F9AE2EE4AED
-:10EEA000C82BCE2E9915049DDD190A83EFE8CF15E6
-:10EEB00037EAC8D5693AAED6A80DAD7B79FC2D35B9
-:10EEC0002CB8F15BE007F36FB7AC977645D94CB13E
-:10EED000DB5C0A29FAFF67702DC47B3DF63DAD6708
-:10EEE0005BB0EF20DEFB4AF099B5A88FFE955DE49C
-:10EEF0008906D58099CFD3338104B77BEE2C94B8A3
-:10EF000013A586C6FB91FF2C4F953A6ACF04D71301
-:10EF1000F86EDAD37CA3E4F587FEA4C7FBD1A5295C
-:10EF20006EE4713DF35C1B71AE9E475D32FE9AA2AA
-:10EF3000F30B3CA1EBA767A97ECE9EE64C799FC55B
-:10EF4000EEA167876732BEBF5932BCE5D5A803186A
-:10EF5000DF1F7B66703FB74F290D77DE073E737565
-:10EF6000795794B9E4DE4EDE79E3137B747D86F144
-:10EF70001DAC7D8923E9FDFEBFFE80CBB3202200BE
-:10EF80000000000000000000040835000000000040
-:00000001FF
diff --git a/firmware/bnx2x-e1h-5.0.21.0.fw.ihex b/firmware/bnx2x-e1h-5.0.21.0.fw.ihex
new file mode 100644
index 0000000..e78c863
--- /dev/null
+++ b/firmware/bnx2x-e1h-5.0.21.0.fw.ihex
@@ -0,0 +1,12855 @@
+:1000000000003BB8000000600000068800003C20B3
+:100010000000192C000042B0000000AC00005BE0C2
+:1000200000008DC400005C90000000E40000EA586D
+:100030000000E4140000EB40000000940001CF58E1
+:10004000000058E80001CFF0000000C4000228E0E2
+:100050000000F978000229A800000004000323280A
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:1001800002040014000000FF02040018000000FF39
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200204203C00000000DE
+:100240000204204000000034020420440000003575
+:10025000060420480000001C020420B80000000131
+:10026000060420BC0000005F0204223807FFFFFFE5
+:100270000204223C0000003F0204224007FFFFFF6F
+:10028000020422440000000F010422480000000084
+:100290000104224C00000000010422500000000074
+:1002A0000104225400000000010422580000000054
+:1002B0000104225C00000000010422600000000034
+:1002C0000104226400000000010422680000000014
+:1002D0000104226C000000000104227000000000F4
+:1002E00001042274000000000104227800000000D4
+:1002F0000104227C000000000C042000000003E840
+:100300000A042000000000010B0420000000000A85
+:1003100002050044000000200205004800000032F1
+:10032000020500900215002002050094021500202D
+:1003300002050098000000300205009C0810000033
+:10034000020500A000000033020500A400000030F8
+:10035000020500A800000031020500AC0000000208
+:10036000020500B000000005020500B40000000610
+:10037000020500B800000002020500BC00000002F7
+:10038000020500C000000000020500C400000005D6
+:10039000020500C800000002020500CC00000002B7
+:1003A000020500D000000002020500D40000000198
+:1003B00002050114000000010205011C00000001FB
+:1003C00002050120000000020205020400000001F5
+:1003D0000205020C0000004002050210000000406F
+:1003E0000205021C0000002002050220000000138C
+:1003F0000205022400000020060502400000000A59
+:1004000004050280002000000205005000000007E3
+:100410000205005400000007020500580000000813
+:100420000205005C000000080205006000000001F9
+:100430000605006400000003020500D80000000665
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C000020500E00000000D020500E80000000742
+:1004D000020500F000000007020500F80000000718
+:1004E000020500E40000002D020500EC00000027DA
+:1004F000020500F400000027020500FC00000027B0
+:10050000020500E00000001D020500E800000017E1
+:10051000020500F000000017020500F800000017B7
+:10052000020500E40000003D020500EC0000003779
+:10053000020500F400000037020500FC000000374F
+:10054000020500E00000004D020500E80000004741
+:10055000020500F000000047020500F80000004717
+:10056000020500E40000006D020500EC00000067D9
+:10057000020500F400000067020500FC00000067AF
+:10058000020500E00000005D020500E800000057E1
+:10059000020500F000000057020500F800000057B7
+:1005A000020500E40000007D020500EC0000007779
+:1005B000020500F400000077020500FC000000774F
+:1005C0000406100002000020020600DC000000010A
+:1005D000010600D80000000004060200000302200B
+:1005E000020600DC00000000010600B80000000068
+:1005F000010600C800000000010600BC0000000069
+:10060000010600CC000000000718040000A900004B
+:10061000081807C800070223071C00002C2D000043
+:10062000071C800038A20B0C071D000028EF1935AD
+:10063000081D681052FE022501180000000000008D
+:10064000011800040000000001180008000000006C
+:100650000118000C0000000001180010000000004C
+:100660000118001400000000021800200000000122
+:1006700002180024000000020218002800000003F5
+:100680000218002C000000000218003000000004D6
+:1006900002180034000000010218003800000000B9
+:1006A0000218003C00000001021800400000000495
+:1006B0000218004400000000021800480000000179
+:1006C0000218004C00000003021800500000000057
+:1006D0000218005400000001021800580000000435
+:1006E0000218005C00000000021800600000000119
+:1006F00002180064000000030218006800000000F7
+:100700000218006C000000010218007000000004D4
+:1007100002180074000000000218007800000004B5
+:100720000218007C00000003061800800000000290
+:10073000021800A400003FFF021800A8000003FFF9
+:100740000218022400000000021802340000000019
+:100750000218024C00000000021802E4000000FF32
+:100760000618100000000400021B8BC000000001EE
+:10077000021B800000000034021B804000000018B3
+:10078000021B80800000000C021B80C000000020C3
+:100790000C1B83000007A1200A1B83000000013806
+:1007A0000B1B830000001388021B83C0000001F4B0
+:1007B000021B1480000000010A1B148000000000CE
+:1007C000061A1000000003B3041A1ECC0001022711
+:1007D000061AA020000000C8061AA00000000002AF
+:1007E000021A1ED000000000061A1ED800000006E3
+:1007F000061A36E800000004061A36E0000000027F
+:10080000061A500000000002061A500800000004FA
+:10081000061A501800000004061A502800000004B0
+:10082000061A503800000004061A50480000000460
+:10083000061A505800000004061A50680000000410
+:10084000061A507800000002041A404000020228F4
+:10085000061A400000000002061A400800000002CC
+:10086000041A62C00020022A061AD1000000000209
+:10087000061A200000000124061AB000000000281B
+:10088000061AB1400000000C061A330000000014E4
+:10089000061A33A000000068061A81080000000252
+:1008A000061AD1C800000002061AD1D800000020A4
+:1008B000061A249000000124061AB0A000000028A7
+:1008C000061AB1700000000C061A33500000001424
+:1008D000061A354000000068061A81100000000268
+:1008E000061AD1D000000002061AD25800000020DB
+:1008F000021A292000000000061A30000000000241
+:10090000041A30080005024A061A301C00000009CB
+:10091000061A320000000008061A5000000000020B
+:10092000061A508000000012061A40000000000263
+:10093000061AD0C000000002021A2924000000009C
+:10094000061A304000000002041A30480005024F29
+:10095000061A305C00000009061A32200000000868
+:10096000061A501000000002061A50C800000012BB
+:10097000061A400800000002061AD0C80000000253
+:10098000021A292800000000061A30800000000228
+:10099000041A308800050254061A309C0000000931
+:1009A000061A324000000008061A5020000000021B
+:1009B000061A511000000012041A401000020259D9
+:1009C000061AD0D000000002021A292C00000000F4
+:1009D000061A30C000000002041A30C80005025B8D
+:1009E000061A30DC00000009061A32600000000818
+:1009F000061A503000000002061A5158000000127A
+:100A0000041A401800020260061AD0D80000000242
+:100A1000021A293000000000061A3100000000020E
+:100A2000041A310800050262061A311C0000000990
+:100A3000061A328000000008061A5040000000022A
+:100A4000061A51A000000012041A4020000202679A
+:100A5000061AD0E000000002021A2934000000004B
+:100A6000061A314000000002041A314800050269EC
+:100A7000061A315C00000009061A32A000000008C6
+:100A8000061A505000000002061A51E80000001239
+:100A9000041A40280002026E061AD0E80000000284
+:100AA000021A293800000000061A318000000002F6
+:100AB000041A318800050270061A319C00000009F2
+:100AC000061A32C000000008061A5060000000023A
+:100AD000061A523000000012041A4030000202755B
+:100AE000061AD0F000000002021A293C00000000A3
+:100AF000061A31C000000002041A31C8000502774E
+:100B0000061A31DC00000009061A32E00000000875
+:100B1000061A507000000002061A527800000012F7
+:100B2000041A40380002027C061AD0F800000002C5
+:100B30000200A294071D29110200A29800000000E3
+:100B40000200A29C009C04240200A2A0000000005D
+:100B50000200A2A4000002090200A270000000002E
+:100B60000200A274000000000200A2700000000059
+:100B70000200A274000000000200A2700000000049
+:100B80000200A274000000000200A2700000000039
+:100B90000200A27400000000020100B40000000185
+:100BA000020100B800000001020100DC00000001A9
+:100BB0000201010000000001020101040000000127
+:100BC0000201007C003000000201008400000028C7
+:100BD0000201008C0000000002010130000000044E
+:100BE0000201025C00000001020103280000000075
+:100BF0000201607000000007020160800000000137
+:100C00000201055400000030020100C40000000190
+:100C1000020100CC00000001020100F80000000108
+:100C2000020100F00000000102010080003000001D
+:100C3000020100880000002802010090000000006E
+:100C40000201013400000004020102DC0000000186
+:100C50000201032C00000000020160740000000784
+:100C60000201608400000001020105640000003000
+:100C7000020100C800000001020100D000000001D4
+:100C8000020100FC00000001020100F4000000016C
+:100C9000020C100000000020020C200800000211CD
+:100CA000020C200C00000200020C201000000204C4
+:100CB000020C201C0000FFFF020C20200000FFFFA0
+:100CC000020C20240000FFFF020C20280000FFFF80
+:100CD000060C203800000002020C20400000003406
+:100CE000020C204400000035020C204800000020C7
+:100CF000020C204C00000021020C205000000022B9
+:100D0000020C205400000023020C20580000002494
+:100D1000020C205C00000025020C20600000002670
+:100D2000020C206400000027020C2068000000284C
+:100D3000020C206C00000029020C20700000002A28
+:100D4000020C20740000002B060C207800000056D6
+:100D5000020C21D000000001020C21D4000000018F
+:100D6000020C21D800000001020C21DC000000016F
+:100D7000020C21E000000001020C21E4000000014F
+:100D8000020C21E800000001020C21EC000000012F
+:100D9000020C21F000000001020C21F4000000010F
+:100DA000060C21F800000010020C223807FFFFFF9C
+:100DB000020C223C0000003F020C224007FFFFFF14
+:100DC000020C22440000000F010C22480000000029
+:100DD000010C224C00000000010C22500000000019
+:100DE000010C225400000000010C225800000000F9
+:100DF000010C225C00000000010C226000000000D9
+:100E0000010C226400000000010C226800000000B8
+:100E1000010C226C00000000010C22700000000098
+:100E2000010C227400000000010C22780000000078
+:100E3000010C227C000000000C0C2000000003E8E4
+:100E40000A0C2000000000010B0C20000000000A2A
+:100E5000020C400800000411020C400C00000400C9
+:100E6000020C401000000404020C40140000042195
+:100E7000020C401C0000FFFF020C40200000FFFF9E
+:100E8000020C40240000FFFF020C40280000FFFF7E
+:100E9000020C403800000046020C403C00000005F7
+:100EA000060C404000000002020C40480000000A0E
+:100EB000020C404C000000F0060C40500000001FE7
+:100EC000020C40CC00000001060C40D00000003AAB
+:100ED000020C41B800000001060C41BC00000003F8
+:100EE000020C41C800000001020C41CC00000001CE
+:100EF000060C41D00000001A020C423807FFFFFF29
+:100F0000020C423C0000003F020C424007FFFFFF82
+:100F1000020C42440000000F010C42480000000097
+:100F2000010C424C00000000010C42500000000087
+:100F3000010C425400000000010C42580000000067
+:100F4000010C425C00000000010C42600000000047
+:100F5000010C426400000000010C42680000000027
+:100F6000010C426C00000000010C42700000000007
+:100F7000010C427400000000010C427800000000E7
+:100F8000010C427C00000000010C428000000000C7
+:100F90000C0C4000000003E80A0C400000000001B7
+:100FA0000B0C40000000000A020D0044000000325B
+:100FB000020D008C02150020020D00900215002089
+:100FC000020D009408100000020D0098000000338C
+:100FD000020D009C00000002020D00A000000000B5
+:100FE000020D00A400000005020D00A8000000058D
+:100FF000060D00AC00000002020D00B4000000026B
+:10100000020D00B800000003020D00BC0000000249
+:10101000020D00C000000001020D00C80000000227
+:10102000020D00CC00000002020D010800000001CA
+:10103000020D015C00000001020D016400000001CE
+:10104000020D016800000002020D02040000000110
+:10105000020D020C00000020020D021000000040F2
+:10106000020D021400000040020D022000000003E7
+:10107000020D022400000018060D0280000000127C
+:10108000040D03000024027E020D004C000000014C
+:10109000020D005000000002020D00540000000884
+:1010A000020D005800000008060D005C000000045E
+:1010B000020D00C400000004020D00040000000145
+:1010C000020D000800000001020D000C00000001EC
+:1010D000020D001000000001020D001400000001CC
+:1010E000020D001800000001020D001C00000001AC
+:1010F000020D002000000001020D0024000000018C
+:10110000020D002800000001020D002C000000016B
+:10111000020D003000000001020D0034000000014B
+:10112000020D003800000001020D003C000000012B
+:10113000020D011400000009020D011C0000000A4C
+:10114000020D012400000007020D012C0000000721
+:10115000020D01340000000C020D013C0000000BE8
+:10116000020D014400000007020D011800000029D3
+:10117000020D01200000002A020D012800000027B6
+:10118000020D013000000027020D01380000002C84
+:10119000020D01400000002B020D01480000002755
+:1011A000020D011400000019020D011C0000001ABC
+:1011B000020D012400000017020D012C0000001791
+:1011C000020D01340000001C020D013C0000001B58
+:1011D000020D014400000017020D01180000003943
+:1011E000020D01200000003A020D01280000003726
+:1011F000020D013000000037020D01380000003CF4
+:10120000020D01400000003B020D014800000037C4
+:10121000020D011400000049020D011C0000004AEB
+:10122000020D012400000047020D012C00000047C0
+:10123000020D01340000004C020D013C0000004B87
+:10124000020D014400000047020D01180000006972
+:10125000020D01200000006A020D01280000006755
+:10126000020D013000000067020D01380000006C23
+:10127000020D01400000006B020D014800000067F4
+:10128000020D011400000059020D011C0000005A5B
+:10129000020D012400000057020D012C0000005730
+:1012A000020D01340000005C020D013C0000005BF7
+:1012B000020D014400000057020D011800000079E2
+:1012C000020D01200000007A020D012800000077C5
+:1012D000020D013000000077020D01380000007C93
+:1012E000020D01400000007B020D01480000007764
+:1012F000020E004C00000032020E00940215002085
+:10130000020E009802150020020E009C0000003022
+:10131000020E00A008100000020E00A4000000331E
+:10132000020E00A800000030020E00AC00000031E8
+:10133000020E00B000000002020E00B40000000423
+:10134000020E00B800000000020E00BC0000000207
+:10135000020E00C000000002020E00C400000000E7
+:10136000020E00C800000002020E00CC00000007C0
+:10137000020E00D000000002020E00D400000002A5
+:10138000020E00D800000001020E00E4000000017F
+:10139000020E014400000001020E014C0000000199
+:1013A000020E015000000002020E020400000001C3
+:1013B000020E020C00000040020E0210000000406D
+:1013C000020E021C00000004020E02200000002099
+:1013D000020E02240000000E020E02280000001B74
+:1013E000060E030000000012040E0280001B02A281
+:1013F000020E00540000000C020E0058000000070E
+:10140000020E005C0000000F020E006000000010E1
+:10141000020E00640000000B060E006800000003CE
+:10142000020E00DC00000003020E000400000001B8
+:10143000020E000800000001020E000C0000000176
+:10144000020E001000000001020E00140000000156
+:10145000020E001800000001020E001C0000000136
+:10146000020E002000000001020E00240000000116
+:10147000020E002800000001020E002C00000001F6
+:10148000020E003000000001020E003400000001D6
+:10149000020E003800000001020E003C00000001B6
+:1014A000020E004000000001020E00440000000196
+:1014B000020E01100000000F020E01180000000EC5
+:1014C000020E012000000000020E012800000000B2
+:1014D000020E01140000002F020E011C0000002E5D
+:1014E000020E012400000000020E012C000000008A
+:1014F000020E01100000001F020E01180000001E65
+:10150000020E012000000000020E01280000000071
+:10151000020E01140000003F020E011C0000003EFC
+:10152000020E012400000000020E012C0000000049
+:10153000020E01100000004F020E01180000004EC4
+:10154000020E012000000000020E01280000000031
+:10155000020E01140000006F020E011C0000006E5C
+:10156000020E012400000000020E012C0000000009
+:10157000020E01100000005F020E01180000005E64
+:10158000020E012000000000020E012800000000F1
+:10159000020E01140000007F020E011C0000007EFC
+:1015A000020E012400000000020E012C00000000C9
+:1015B0000730040000E10000083007D8000502BD34
+:1015C000073400002ECA000007348000311A0BB324
+:1015D00007350000368B17FA0735800039C6259D80
+:1015E0000736000013D5340F0836307039F202BFC9
+:1015F0000130000000000000013000040000000085
+:1016000001300008000000000130000C0000000064
+:101610000130001000000000013000140000000044
+:10162000023000200000000102300024000000020F
+:1016300002300028000000030230002C00000000EF
+:1016400002300030000000040230003400000001CD
+:1016500002300038000000000230003C00000001B1
+:10166000023000400000000402300044000000008E
+:1016700002300048000000010230004C000000036E
+:101680000230005000000000023000540000000151
+:1016900002300058000000040230005C000000002E
+:1016A000023000600000000102300064000000030E
+:1016B00002300068000000000230006C00000001F1
+:1016C00002300070000000040230007400000000CE
+:1016D00002300078000000040230007C00000003AB
+:1016E0000630008000000002023000A400003FFF2E
+:1016F000023000A8000003FF0230022400000000B6
+:1017000002300234000000000230024C00000000F1
+:10171000023002E40000FFFF063020000000080055
+:1017200002338BC000000001023380000000001A69
+:10173000023380400000004E023380800000001021
+:10174000023380C0000000200C3383000007A1207A
+:101750000A338300000001380B3383000000138834
+:10176000023383C0000001F40C3383801DCD65007B
+:101770000A3383800004C4B40B338380004C4B4095
+:101780000A331480000000000233148000000001BE
+:10179000063220000000010206328020000000C84E
+:1017A000063280000000000206323DA8000000045E
+:1017B00006323D800000000904323DA4000102C150
+:1017C00006323D00000000200632500000000400F8
+:1017D000063240000000000204324008000102C24C
+:1017E0000632400C00000003063240D80000000220
+:1017F00006326B680000000204326B70000202C304
+:1018000006326B1000000002043274C0000202C5F0
+:101810000632DA40000000020632E0000000080054
+:10182000023308000100000004330C00001002C75E
+:10183000023308000000000004330C40001002D7FF
+:1018400006322450000000B406322AD00000000204
+:1018500006321000000001A002323DB80000000076
+:101860000632500000000020063251000000002027
+:101870000632520000000020063253000000002013
+:1018800006325400000000200632550000000020FF
+:1018900006325600000000200632570000000020EB
+:1018A00006325800000000200632590000000020D7
+:1018B00006325A000000002006325B0000000020C3
+:1018C00006325C000000002006325D0000000020AF
+:1018D00006325E000000002006325F00000000209B
+:1018E00006326B780000005206326E080000000CD1
+:1018F0000632DA880000000206322720000000B419
+:1019000006322AD80000000206321680000001A02C
+:1019100002323DBC00000000063250800000002072
+:101920000632518000000020063252800000002064
+:101930000632538000000020063254800000002050
+:10194000063255800000002006325680000000203C
+:101950000632578000000020063258800000002028
+:10196000063259800000002006325A800000002014
+:1019700006325B800000002006325C800000002000
+:1019800006325D800000002006325E8000000020EC
+:1019900006325F800000002006326CC0000000525A
+:1019A00006326E380000000C0632DA9000000002A9
+:1019B00002322A3000000000063240180000000207
+:1019C0000632D0000000000602322A340000000077
+:1019D00006324028000000020632D018000000063F
+:1019E00002322A38000000000632403800000002AF
+:1019F0000632D0300000000602322A3C000000000F
+:101A000006324048000000020632D04800000006BE
+:101A100002322A4000000000063240580000000256
+:101A20000632D0600000000602322A4400000000A6
+:101A300006324068000000020632D078000000063E
+:101A400002322A48000000000632407800000002FE
+:101A50000632D0900000000602322A4C000000003E
+:101A600006324088000000020632D0A800000006BE
+:101A7000072004000093000008200780001002E700
+:101A8000072400002ADF0000072480002E050AB882
+:101A90000824E4A061D202E9012000000000000057
+:101AA00001200004000000000120000800000000E8
+:101AB0000120000C000000000120001000000000C8
+:101AC000012000140000000002200020000000019E
+:101AD0000220002400000002022000280000000371
+:101AE0000220002C00000000022000300000000452
+:101AF0000220003400000001022000380000000035
+:101B00000220003C00000001022000400000000410
+:101B100002200044000000000220004800000001F4
+:101B20000220004C000000030220005000000000D2
+:101B300002200054000000010220005800000004B0
+:101B40000220005C00000000022000600000000194
+:101B50000220006400000003022000680000000072
+:101B60000220006C00000001022000700000000450
+:101B70000220007400000000022000780000000431
+:101B80000220007C0000000306200080000000020C
+:101B9000022000A400003FFF022000A8000003FF75
+:101BA0000220022400000000022002340000000095
+:101BB0000220024C00000000022002E40000FFFFAF
+:101BC000062020000000080002238BC00000000156
+:101BD0000223800000000010022380400000001259
+:101BE0000223808000000030022380C00000000E2D
+:101BF000022383C0000001F40223148000000001CE
+:101C00000A23148000000000062210000000004299
+:101C100006227020000000C80622700000000002AA
+:101C2000022211E80000000006223000000000C07F
+:101C3000062240700000008006225280000000044E
+:101C40000622670000000100062290000000040048
+:101C500004226B08002002EB02230800013FFFFF73
+:101C600004230C000010030B0223080000000000F6
+:101C700004230C400010031B06228100000000A07A
+:101C8000062286000000004006228C000000003C76
+:101C90000622B0000000020006228800000000803A
+:101CA00006228DE00000003C0622404000000006B5
+:101CB00006228380000000A006228700000000406A
+:101CC00006228CF00000003C0622B8000000020052
+:101CD00006228A000000008006228ED00000003C10
+:101CE000062240580000000606228000000000087E
+:101CF000022211480000000006223300000000020A
+:101D0000062260400000003006228020000000080B
+:101D10000222114C000000000622330800000002DD
+:101D2000062261000000003006228040000000080A
+:101D300002221150000000000622331000000002B1
+:101D4000062261C00000003006228060000000080A
+:101D50000222115400000000062233180000000285
+:101D60000622628000000030062280800000000809
+:101D70000222115800000000062233200000000259
+:101D80000622634000000030062280A00000000808
+:101D90000222115C0000000006223328000000022D
+:101DA0000622640000000030062280C00000000807
+:101DB0000222116000000000062233300000000201
+:101DC000062264C000000030062280E00000000807
+:101DD00002221164000000000622333800000002D5
+:101DE0000622658000000030021610000000002866
+:101DF00002170008000000020217002C0000000378
+:101E00000217003C00000004021700440000000814
+:101E100002170048000000020217004C000000906A
+:101E2000021700500000009002170054008000903C
+:101E30000217005808140000021700600000008A12
+:101E40000217006400000080021700680000008193
+:101E50000217006C000000800217007000000006EE
+:101E600002170078000007D00217007C0000076C02
+:101E700002170038007C1004021700040000000F55
+:101E80000616402400000002021640700000001CEC
+:101E90000216420800000001021642100000000174
+:101EA0000216422000000001021642280000000134
+:101EB0000216423000000001021642380000000104
+:101EC00002164260000000020C16401C0003D09075
+:101ED0000A16401C0000009C0B16401C000009C4A0
+:101EE0000216403000000008021640340000000CCA
+:101EF0000216403800000010021640440000002086
+:101F00000216400000000001021640D80000000147
+:101F100002164008000000010216400C00000001FB
+:101F200002164010000000010216424000000000AE
+:101F3000021642480000000006164270000000022F
+:101F40000216425000000000021642580000000035
+:101F500006164280000000020216600800000424F9
+:101F60000216600C00000410021660100000041439
+:101F70000216601C0000FFFF021660200000FFFF39
+:101F8000021660240000FFFF021660280000FFFF19
+:101F900002166038000000200216603C000000209D
+:101FA0000216604000000034021660440000003554
+:101FB00002166048000000230216604C0000002456
+:101FC0000216605000000025021660540000002632
+:101FD00002166058000000270216605C000000290D
+:101FE000021660600000002A021660640000002BE8
+:101FF000021660680000002C0216606C0000002DC4
+:102000000616607000000052021661B80000000160
+:10201000061661BC0000001F0216623807FFFFFFB2
+:102020000216623C0000003F0216624007FFFFFFFD
+:10203000021662440000000F011662480000000012
+:102040000116624C00000000011662500000000002
+:1020500001166254000000000116625800000000E2
+:102060000116625C000000000116626000000000C2
+:1020700001166264000000000116626800000000A2
+:102080000116626C00000000011662700000000082
+:102090000116627400000000011662780000000062
+:1020A0000116627C000000000C166000000003E8CE
+:1020B0000A166000000000010B1660000000000A14
+:1020C0000216804000000006021680440000000551
+:1020D000021680480000000A0216804C000000052D
+:1020E0000216805400000002021680CC000000049A
+:1020F000021680D000000004021680D40000000404
+:10210000021680D800000004021680DC00000004E3
+:10211000021680E000000004021680E400000004C3
+:10212000021680E800000004021688040000000483
+:10213000021680300000007C021680340000003D52
+:10214000021680380000003F0216803C0000009C10
+:10215000021680F000000007061680F4000000055B
+:102160000216880C0101010102168108000000001E
+:102170000216810C00000004021681100000000409
+:1021800002168114000000020216881008012004C3
+:1021900002168118000000050216811C00000005CF
+:1021A00002168120000000050216812400000005AF
+:1021B0000216882C20081001021681280000000851
+:1021C0000216812C00000006021681300000000774
+:1021D000021681340000000002168830010101203F
+:1021E000061681380000000402168834010101013E
+:1021F00002168148000000000216814C0000000415
+:1022000002168150000000040216815400000002F2
+:1022100002168838080120040216815800000005C3
+:102220000216815C000000050216816000000005B6
+:1022300002168164000000050216883C2008100187
+:1022400002168168000000080216816C000000067A
+:102250000216817000000007021681740000000160
+:102260000216884001010120021681780000000159
+:102270000216817C0000000102168180000000012E
+:102280000216818400000001021688440101010148
+:1022900002168188000000010216818C00000004F3
+:1022A00002168190000000040216819400000002D2
+:1022B00002168848080120040216819800000005D3
+:1022C0000216819C00000005021681A00000000596
+:1022D000021681A4000000050216881420081001CF
+:1022E000021681A800000008021681AC000000065A
+:1022F000021681B000000007021681B40000000140
+:102300000216881801010120021681B800000001A0
+:10231000021681BC00000001021681C0000000010D
+:10232000021681C4000000010216881C010101018F
+:10233000021681C800000001021681CC00000004D2
+:10234000021681D000000004021681D400000002B1
+:102350000216882008012004021681D8000000051A
+:10236000021681DC00000005021681E00000000575
+:10237000021681E4000000050216882420081001DE
+:10238000021681E800000008021681EC0000000639
+:10239000021681F0000000070216E40C00000000A5
+:1023A00002168828010101200616E410000000042E
+:1023B0000216E000010101010216E4200000000005
+:1023C0000216E424000000040216E42800000004C1
+:1023D0000216E42C000000020216E00408012004AA
+:1023E0000216E430000000050216E4340000000587
+:1023F0000216E438000000050216E43C0000000567
+:102400000216E008200810010216E440000000084F
+:102410000216E444000000060216E448000000072B
+:102420000216E44C000000000216E00C010101203D
+:102430000616E450000000040216E010010101013C
+:102440000216E460000000000216E46400000004CC
+:102450000216E468000000040216E46C00000002AA
+:102460000216E014080120040216E47000000005C2
+:102470000216E474000000050216E478000000056E
+:102480000216E47C000000050216E0182008100186
+:102490000216E480000000080216E4840000000632
+:1024A0000216E488000000070216E48C0000000118
+:1024B0000216E01C010101200216E4900000000158
+:1024C0000216E494000000010216E49800000001E6
+:1024D0000216E49C000000010216E0200101010147
+:1024E0000216E4A0000000010216E4A400000004AB
+:1024F0000216E4A8000000040216E4AC000000028A
+:102500000216E024080120040216E4B000000005D1
+:102510000216E4B4000000050216E4B8000000054D
+:102520000216E4BC000000050216E0282008100195
+:102530000216E4C0000000080216E4C40000000611
+:102540000216E4C8000000070216E4CC00000001F7
+:102550000216E02C010101200216E4D00000000167
+:102560000216E4D4000000010216E4D800000001C5
+:102570000216E4DC000000010216E0300101010156
+:102580000216E4E0000000010216E4E4000000048A
+:102590000216E4E8000000040216E4EC0000000269
+:1025A0000216E034080120040216E4F000000005E1
+:1025B0000216E4F4000000050216E4F8000000052D
+:1025C0000216E4FC000000050216E03820081001A5
+:1025D0000216E500000000080216E50400000006EF
+:1025E0000216E508000000070216E03C0101012088
+:1025F00002168240003F003F0216824400000000A5
+:102600000216E524003F003F0216E5280000000006
+:1026100002168248000000000216824C003F003F74
+:102620000216E52C000000000216E530003F003FD6
+:1026300002168250010001000216825401000100BE
+:102640000216E534010001000216E5380100010020
+:1026500006168258000000020216E53C0000000049
+:102660000216E540000000000216826000C000C0B3
+:102670000216826400C000C00216E54400C000C01B
+:102680000216E54800C000C0021682681E001E0047
+:102690000216826C1E001E000216E54C1E001E0073
+:1026A0000216E5501E001E00021682704000400017
+:1026B00002168274400040000216E55440004000BB
+:1026C0000216E55840004000021682788000800023
+:1026D0000216827C800080000216E55C800080008B
+:1026E0000216E56080008000021682802000200033
+:1026F00002168284200020000216E56420002000DB
+:102700000216E568200020000616828800000002FC
+:102710000216E56C000000000216E57000000000E3
+:102720000216829000000000021682940000000051
+:102730000216E574000000000216E57800000000B3
+:1027400002168298000000000216829C0000000021
+:102750000216E57C000000000216E5800000000083
+:10276000021682A000000000021682A400000001F0
+:10277000061682A80000000A021681F400000C0868
+:10278000021681F800000040021681FC00000100E2
+:1027900002168200000000200216820400000017CA
+:1027A00002168208000000800216820C000002005F
+:1027B00002168210000000000216821801FF01FFBD
+:1027C0000216821401FF01FF0216E51001FF01FF4E
+:1027D0000216E50C01FF01FF0216823C0000001307
+:1027E000021680900000013F021680600000014048
+:1027F0000216806400000140061680680000000296
+:1028000002168070000000C00616807400000007E9
+:102810000216809C00000048021680A000000048BC
+:10282000061680A400000002021680AC00000048DA
+:10283000061680B0000000070216823800008000F3
+:1028400002168234000025E40216809400007FFF07
+:1028500002168220000F000F0216821C000F000FCC
+:102860000216E518000F000F0216E514000F000F06
+:10287000021682280000000002168224FFFFFFFFDC
+:102880000216E520000000000216E51CFFFFFFFF16
+:102890000216E6BC000000000216E6C000000002BE
+:1028A0000216E6C4000000010216E6C8000000039C
+:1028B0000216E6CC000000040216E6D00000000676
+:1028C0000216E6D4000000050216E6D80000000754
+:1028D000021680EC000000FF02140000000000015E
+:1028E0000214000C0000000102140040000000016E
+:1028F0000214004400007FFF0214000C00000000DE
+:1029000002140000000000000214006C000000002F
+:102910000214000400000001021400300000000155
+:1029200002140004000000000214005C000000001B
+:10293000021400080000000102140034000000012D
+:1029400002140008000000000214006000000000F3
+:102950000202005800000032020200A0031500200D
+:10296000020200A403150020020200A801000030AA
+:10297000020200AC08100000020200B000000033A8
+:10298000020200B400000030020200B80000003172
+:10299000020200BC00000003020200C000000006AA
+:1029A000020200C400000003020200C8000000038D
+:1029B000020200CC00000002020200D00000000071
+:1029C000020200D400000002020200DC000000004D
+:1029D000020200E000000006020200E40000000421
+:1029E000020200E800000002020200EC0000000207
+:1029F000020200F000000001020200FC00000006DC
+:102A00000202012000000000020201340000000266
+:102A1000020201B0000000010202020C00000001ED
+:102A2000020202140000000102020218000000026B
+:102A300002020404000000010202040C0000004035
+:102A400002020410000000400202041C0000000406
+:102A50000202042000000020020204240000000200
+:102A600002020428000000200602050000000012F7
+:102A700004020480001F032B020200600000000F0C
+:102A80000202006400000007020200680000000B60
+:102A90000202006C0000000E020200700000000E36
+:102AA0000602007400000003020200F400000004AB
+:102AB0000202000400000001020200080000000100
+:102AC0000202000C000000010202001000000001E0
+:102AD00002020014000000010202001800000001C0
+:102AE0000202001C000000010202002000000001A0
+:102AF0000202002400000001020200280000000180
+:102B00000202002C0000000102020030000000015F
+:102B1000020200340000000102020038000000013F
+:102B20000202003C0000000102020040000000011F
+:102B300002020044000000010202004800000001FF
+:102B40000202004C000000010202005000000001DF
+:102B500002020108000000C8020201180000000281
+:102B6000020201C400000000020201CC00000000CB
+:102B7000020201D400000002020201DC0000000297
+:102B8000020201E4000000FF020201EC000000FF6D
+:102B900002020100000000000202010C000000C857
+:102BA0000202011C00000002020201C80000000035
+:102BB000020201D000000000020201D80000000261
+:102BC000020201E000000002020201E8000000FF32
+:102BD000020201F0000000FF0202010400000000F8
+:102BE00002020108000000C80202011800000002F1
+:102BF000020201C400000000020201CC000000003B
+:102C0000020201D400000002020201DC0000000206
+:102C1000020201E4000000FF020201EC000000FFDC
+:102C200002020100000000000202010C000000C8C6
+:102C30000202011C00000002020201C800000000A4
+:102C4000020201D000000000020201D800000002D0
+:102C5000020201E000000002020201E8000000FFA1
+:102C6000020201F0000000FF020201040000000067
+:102C700002020108000000C8020201180000000260
+:102C8000020201C400000000020201CC00000000AA
+:102C9000020201D400000002020201DC0000000276
+:102CA000020201E4000000FF020201EC000000FF4C
+:102CB00002020100000000000202010C000000C836
+:102CC0000202011C00000002020201C80000000014
+:102CD000020201D000000000020201D80000000240
+:102CE000020201E000000002020201E8000000FF11
+:102CF000020201F0000000FF0202010400000000D7
+:102D000002020108000000C80202011800000002CF
+:102D1000020201C400000000020201CC0000000019
+:102D2000020201D400000002020201DC00000002E5
+:102D3000020201E4000000FF020201EC000000FFBB
+:102D400002020100000000000202010C000000C8A5
+:102D50000202011C00000002020201C80000000083
+:102D6000020201D000000000020201D800000002AF
+:102D7000020201E000000002020201E8000000FF80
+:102D8000020201F0000000FF020201040000000046
+:102D90000728040000C00000082807A8000B034A09
+:102DA000072C000032FD0000072C8000357E0CC08F
+:102DB000072D00003AE41A20072D800039CF28DAC9
+:102DC000072E00001C3C374E082E3710391E034CCE
+:102DD000012800000000000001280004000000009D
+:102DE00001280008000000000128000C000000007D
+:102DF000012800100000000001280014000000005D
+:102E00000228002000000001022800240000000227
+:102E100002280028000000030228002C0000000007
+:102E200002280030000000040228003400000001E5
+:102E300002280038000000000228003C00000001C9
+:102E400002280040000000040228004400000000A6
+:102E500002280048000000010228004C0000000386
+:102E60000228005000000000022800540000000169
+:102E700002280058000000040228005C0000000046
+:102E80000228006000000001022800640000000326
+:102E900002280068000000000228006C0000000109
+:102EA00002280070000000040228007400000000E6
+:102EB00002280078000000040228007C00000003C3
+:102EC0000628008000000002022800A400003FFF46
+:102ED000022800A8000003FF0228022400000000CE
+:102EE00002280234000000000228024C000000000A
+:102EF000022802E40000FFFF06282000000008006E
+:102F0000022B8BC000000001022B8000000000009B
+:102F1000022B804000000018022B80800000000C73
+:102F2000022B80C0000000660C2B83000007A1204C
+:102F30000A2B8300000001380B2B8300000013884C
+:102F4000022B83C0000001F40C2B8340000001F42D
+:102F50000A2B8340000000000B2B8340000000057B
+:102F60000A2B83800004C4B40C2B83801DCD650024
+:102F70000A2B1480000000000B2B8380004C4B4078
+:102F8000022B148000000001062A29C8000000045A
+:102F9000042A29D80002034E062A20800000004897
+:102FA000062A9020000000C8062A900000000002B7
+:102FB000062A21A800000086062A20000000002022
+:102FC000022A23C800000000042A23D00002035074
+:102FD000042A249800040352022A2C500000000006
+:102FE000022A2C1000000000042A2C0800020356BC
+:102FF000042A300000020358062A300800000100AD
+:10300000062A404000000010042A40000010035A25
+:10301000062A6AC000000002062A6B0000000004B5
+:10302000042A84080002036A022B08000000000042
+:10303000042B0C000010036C022B080001000000A0
+:10304000042B0C400008037C022B08000200000047
+:10305000042B0C6000080384062AC000000000D87E
+:10306000062A24A800000014062A2548000000248F
+:10307000062A266800000024062A2788000000246B
+:10308000062A28A800000024062AA0000000002824
+:10309000062AA1400000000C042A29E00002038C4B
+:1030A000062A502000000002062A503000000002CC
+:1030B000062A500000000002062A501000000002FC
+:1030C000022A520800000001042A6AC80002038E86
+:1030D000062A6B1000000042062A6D200000000442
+:1030E000062ABCD000000002062AC360000000D8F7
+:1030F000062A24F800000014062A25D8000000241F
+:10310000062A26F800000024062A281800000024B9
+:10311000062A293800000024062AA0A00000002862
+:10312000062AA1700000000C042A29E8000203907E
+:10313000062A502800000002062A5038000000022B
+:10314000062A500800000002062A5018000000025B
+:10315000022A520C00000001042A6AD000020392E5
+:10316000062A6C1800000042062A6D300000000498
+:10317000062ABCD800000002022AC6C000000000D7
+:10318000042A29F000100394062A50480000000E7B
+:10319000062AB00000000006022AC6C40000000093
+:1031A000042A2A30001003A4062A50800000000ED2
+:1031B000062AB01800000006022AC6C80000000057
+:1031C000042A2A70001003B4062A50B80000000E2A
+:1031D000062AB03000000006022AC6CC000000001B
+:1031E000042A2AB0001003C4062A50F00000000E82
+:1031F000062AB04800000006022AC6D000000000DF
+:10320000042A2AF0001003D4062A51280000000ED8
+:10321000062AB06000000006022AC6D400000000A2
+:10322000042A2B30001003E4062A51600000000E2F
+:10323000062AB07800000006022AC6D80000000066
+:10324000042A2B70001003F4062A51980000000E87
+:10325000062AB09000000006022AC6DC000000002A
+:10326000042A2BB000100404062A51D00000000EDE
+:10327000062AB0A800000006021010080000000195
+:103280000210105000000001021010000003D000D6
+:10329000021010040000003D091018000200041480
+:1032A0000910110000280614061011A000000018D3
+:1032B00006102400000000E00210201C00000000A6
+:1032C0000210202000000001021020C000000002B7
+:1032D000021020040000000102102008000000017C
+:1032E00009103C000005063C0910380000050641A5
+:1032F000091038200005064606104C0000000100A9
+:1033000002104028000000100210404400003FFF5F
+:103310000210405800280000021040840084924AA5
+:1033200002104058000000000210800000001080D1
+:10333000021080AC00000000021080380000001075
+:103340000210810000000000061081200000000231
+:1033500002108008000002B502108010000000007A
+:10336000061082000000004A021081080001FFFFE1
+:1033700006108140000000020210800000001A8048
+:103380000610900000000024061091200000004A62
+:10339000061093700000004A061095C00000004A15
+:1033A0000210800400001080021080B000000001B4
+:1033B0000210803C00000010021081040000000098
+:1033C00006108128000000020210800C000002B5E7
+:1033D0000210801400000000061084000000004A63
+:1033E0000210810C0001FFFF06108148000000025E
+:1033F0000210800400001A80061090900000002443
+:10340000061092480000004A061094980000004AF6
+:10341000061096E80000004A0210800000001080AC
+:10342000021080AC00000002021080380000001082
+:103430000210810000000000061081200000000240
+:1034400002108008000002B5021080100000000089
+:10345000061082000000004A021081080001FFFFF0
+:1034600006108140000000020210800000001A8057
+:103470000610900000000024061091200000004A71
+:10348000061093700000004A061095C00000004A24
+:103490000210800400001080021080B000000003C1
+:1034A0000210803C000000100210810400000000A7
+:1034B00006108128000000020210800C000002B5F6
+:1034C0000210801400000000061084000000004A72
+:1034D0000210810C0001FFFF06108148000000026D
+:1034E0000210800400001A80061090900000002452
+:1034F000061092480000004A061094980000004A06
+:10350000061096E80000004A0210800000001080BB
+:10351000021080AC0000000402108038000000108F
+:10352000021081000000000006108120000000024F
+:1035300002108008000002B5021080100000000098
+:10354000061082000000004A021081080001FFFFFF
+:1035500006108140000000020210800000001A8066
+:103560000610900000000024061091200000004A80
+:10357000061093700000004A061095C00000004A33
+:103580000210800400001080021080B000000005CE
+:103590000210803C000000100210810400000000B6
+:1035A00006108128000000020210800C000002B505
+:1035B0000210801400000000061084000000004A81
+:1035C0000210810C0001FFFF06108148000000027C
+:1035D0000210800400001A80061090900000002461
+:1035E000061092480000004A061094980000004A15
+:1035F000061096E80000004A0210800000001080CB
+:10360000021080AC0000000602108038000000109C
+:10361000021081000000000006108120000000025E
+:1036200002108008000002B50210801000000000A7
+:10363000061082000000004A021081080001FFFF0E
+:1036400006108140000000020210800000001A8075
+:103650000610900000000024061091200000004A8F
+:10366000061093700000004A061095C00000004A42
+:103670000210800400001080021080B000000007DB
+:103680000210803C000000100210810400000000C5
+:1036900006108128000000020210800C000002B514
+:1036A0000210801400000000061084000000004A90
+:1036B0000210810C0001FFFF06108148000000028B
+:1036C0000210800400001A80061090900000002470
+:1036D000061092480000004A061094980000004A24
+:1036E000061096E80000004A021205B00000000132
+:1036F0000212049000E383400212051400003C1003
+:103700000212066C000000010212067000000000A8
+:1037100002120494FFFFFFFF02120498FFFFFFFF55
+:103720000212049CFFFFFFFF021204A0FFFFFFFF35
+:10373000021204A4FFFFFFFF021204A8FFFFFFFF15
+:10374000021204ACFFFFFFFF021204B0FFFFFFFFF5
+:10375000021204BCFFFFFFFF021204C0FFFFFFFFC5
+:10376000021204C4FFFFFFFF021204C8FFFFFFFFA5
+:10377000021204CCFFFFFFFF021204D0FFFFFFFF85
+:10378000021204D8FFFFFFFF021204DCFFFFFFFF5D
+:10379000021204E0FFFFFFFF021204E4FFFFFFFF3D
+:1037A000021204E8FFFFFFFF021204ECFFFFFFFF1D
+:1037B000021204F0FFFFFFFF021204F4FFFFFFFFFD
+:1037C000021204F8FFFFFFFF021204FCFFFFFFFFDD
+:1037D00002120500FFFFFFFF02120504FFFFFFFFBB
+:1037E00002120508FFFFFFFF0212050CFFFFFFFF9B
+:1037F00002120510FFFFFFFF021204D4FF80200019
+:10380000021204B4F0005000021204B8F0001000DC
+:1038100002120390000000080212039C000000083E
+:10382000021203A000000008021203A4000000021C
+:10383000021203BC00000004021203C000000005D5
+:10384000021203C400000004021203D000000000B2
+:103850000212036C00000001021203680000003F26
+:10386000021201BC00000040021201C00000180852
+:10387000021201C400000803021201C8000008037C
+:10388000021201CC00000040021201D0000000032F
+:10389000021201D400000803021201D8000008033C
+:1038A000021201DC00000803021201E00001000323
+:1038B000021201E400000803021201E800000803FC
+:1038C000021201EC00000003021201F000000003EC
+:1038D000021201F400000003021201F800000003CC
+:1038E000021201FC000000030212020000000003AB
+:1038F000021202040000000302120208000000038A
+:103900000212020C00000003021202100000000369
+:103910000212021400000003021202180000000349
+:103920000212021C00000003021202200000000329
+:1039300002120224000000030212022800002403E5
+:103940000212022C0000002F0212023000000009B7
+:103950000212023400000019021202380000018431
+:103960000212023C00000183021202400000030622
+:103970000212024400000019021202480000000670
+:103980000212024C0000030602120250000003065D
+:1039900002120254000003060212025800000C86B4
+:1039A0000212025C0000030602120260000003061D
+:1039B0000212026400000006021202680000000603
+:1039C0000212026C000000060212027000000006E3
+:1039D00002120274000000060212027800000006C3
+:1039E0000212027C000000060212028000000006A3
+:1039F0000212028400000006021202880000000683
+:103A00000212028C00000006021202900000000662
+:103A10000212029400000006021202980000000642
+:103A20000212029C00000006021202A0000003061F
+:103A3000021202A400000013021202A800000006F5
+:103A4000021202B000001004021202B400001004BE
+:103A50000212032400106440021203280010644084
+:103A6000021205B400000001021201B000000001C2
+:103A70000600A000000000160200A0EC5554000053
+:103A80000200A0F0555555550200A0F40000555510
+:103A90000200A0F8F00000000200A0FC5554000055
+:103AA0000200A100555555550200A10400005555CE
+:103AB0000200A108F00000000200A18C5554000093
+:103AC0000200A190555555550200A194000055558E
+:103AD0000200A198F00000000200A19C000000007C
+:103AE0000200A1A0000100000200A1A400005014E7
+:103AF0000200A1A8000000000200A45C00000C006D
+:103B00000200A61C000000030200A06CFF5C000085
+:103B10000200A070FFF55FFF0200A0740000FFFF2D
+:103B20000200A078F00003E00200A07C000000008A
+:103B30000200A0800000A0000600A0840000000594
+:103B40000200A0980FE000000600A09C0000000703
+:103B50000200A0B8000004000600A0BC00000003A2
+:103B60000200A0C8000010000600A0CC0000000366
+:103B70000200A0D8000040000600A0DC0000000306
+:103B80000200A0E8000100000600A22C00000004D2
+:103B90000200A10CFF5C00000200A110FFF55FFF16
+:103BA0000200A1140000FFFF0200A118F00003E0D2
+:103BB0000200A11C000000000200A1200000A000E3
+:103BC0000600A124000000050200A1380FE000005B
+:103BD0000600A13C000000070200A15800000800F8
+:103BE0000600A15C000000030200A16800002000A4
+:103BF0000600A16C000000030200A1780000800014
+:103C00000600A17C000000030200A1880002000061
+:103C10000600A23C000000040000000000000000BC
+:103C20000000003100000000000000000000000063
+:103C30000000000000000000000000000000000084
+:103C40000000000000000000000000000031003211
+:103C50000000000000000000000000000000000064
+:103C60000000000000000000000000000000000054
+:103C700000000000000000000032005600000000BC
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA000000000000056008C000000000000000032
+:103CB000008C009000900094009400980098009C64
+:103CC000009C00A000A000A400A400A800A800ACD4
+:103CD00000AC00B100B100B300B300B500000000BB
+:103CE00000000000000000000000000000000000D4
+:103CF00000000000000000000000000000B501020C
+:103D00000102010A010A01120112011B011B012417
+:103D10000124012D012D01360136013F013F0148EB
+:103D2000014801510151015A00000000000000004B
+:103D30000000000000000000000000000000000083
+:103D40000000000000000000000000000000000073
+:103D50000000000000000000000000000000000063
+:103D60000000000000000000000000000000000053
+:103D70000000000000000000000000000000000043
+:103D80000000000000000000000000000000000033
+:103D90000000000000000000000000000000000023
+:103DA0000000000000000000000000000000000013
+:103DB0000000000000000000000000000000000003
+:103DC00000000000000000000000000000000000F3
+:103DD0000000000000000000015A015F0000000028
+:103DE00000000000015F016001600161016101628A
+:103DF000016201630163016401640165016501669B
+:103E000001660167000000000000000000000000E3
+:103E100000000000000000000000000000000000A2
+:103E20000000000000000000000000000000000092
+:103E30000167016C016C01790179018600000000C5
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E60000000000000000000000000000000000052
+:103E70000000000000000000000000000000000042
+:103E80000000000000000000018601870000000023
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB00000000000018701BE0000000000000000BB
+:103EC00000000000000000000000000000000000F2
+:103ED00000000000000000000000000000000000E2
+:103EE00001BE01E900000000000000000000000029
+:103EF00000000000000000000000000000000000C2
+:103F000000000000000000000000000001E9021AAB
+:103F10000000000000000000021A02210221022815
+:103F20000228022F022F02360236023D023D0244D1
+:103F30000244024B024B02520252028A000000006D
+:103F400000000000028A028E028E02920292029605
+:103F50000296029A029A029E029E02A202A202A661
+:103F600002A602AA02AA02FC02FC03130313032AFC
+:103F7000032A032D032D03300330033303330336A9
+:103F8000033603390339033C033C033F033F034239
+:103F9000034203830383038A038A039103910395F6
+:103FA000039503990399039D039D03A103A103A511
+:103FB00003A503A903A903AD03AD03B103B103B284
+:103FC00000000000000000000000000000000000F1
+:103FD00000000000000000000000000000000000E1
+:103FE000000000000000000003B203C40000000055
+:103FF00000000000000000000000000000000000C1
+:1040000000000000000000000000000000000000B0
+:104010000000000003C403D903D903DC03DC03DF81
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:1040400003DF040C0000000000000000000000007E
+:104050000000000000000000000000000000000060
+:10406000000000000000000000000000040C050F2C
+:104070000000000000000000000000000000000040
+:104080000000000000000000000000000000000030
+:104090000000000000000000050F05160516051AB7
+:1040A000051A051E000000000000000000000000CE
+:1040B0000000000000000000000000000000000000
+:1040C00000000000051E055E00000000000000006A
+:1040D000055E056705670570057005790579058238
+:1040E0000582058B058B05940594059D059D05A608
+:1040F00005A605FF05FF0611061106230623062760
+:104100000627062B062B062F062F06330633063707
+:104110000637063B063B063F063F06430643064A74
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:104140000000000000000000064A065000000000C9
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:104170000000000006500653000000000000000090
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A0000653065900000000000000000000000057
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000000000000EF
+:1041D0000000000000000000065906680668067727
+:1041E0000677068606860695069506A406A406B3F7
+:1041F00006B306C206C206D106D10742000000007F
+:1042000000000000000000000000000000000000AE
+:10421000000000000000000000000000000000009E
+:104220000000000007420755075507660766077735
+:10423000000000000000000000000000000000007E
+:10424000000000000000000000000000000000006E
+:10425000000000000000000000000000000000005E
+:10426000000000000000000000000000000000004E
+:10427000000000000000000000000000000000003E
+:10428000000000000000000000000000000000002E
+:10429000000000000000000000000000000000001E
+:1042A000000000000000000000000000000000000E
+:1042B00000010000000204C00003098000040E4059
+:1042C00000051300000617C000071C8000082140ED
+:1042D00000092600000A2AC0000B2F80000C344081
+:1042E000000D3900000E3DC0000F42800010474015
+:1042F00000114C00001250C00013558000145A40A9
+:1043000000155F00001663C00017688000186D403C
+:1043100000197200001A76C0001B7B80001C8040D0
+:10432000001D8500001E89C0001F8E800020934064
+:10433000000020000000400000006000000080003D
+:104340000000A0000000C0000000E000000100002C
+:104350000001200000014000000160000001800019
+:104360000001A0000001C0000001E0000002000008
+:1043700000022000000240000002600000028000F5
+:104380000002A0000002C0000002E00000030000E4
+:1043900000032000000340000003600000038000D1
+:1043A0000003A0000003C0000003E00000040000C0
+:1043B00000042000000440000004600000048000AD
+:1043C0000004A0000004C0000004E000000500009C
+:1043D0000005200000054000000560000005800089
+:1043E0000005A0000005C0000005E0000006000078
+:1043F0000006200000064000000660000006800065
+:104400000006A0000006C0000006E0000007000053
+:104410000007200000074000000760000007800040
+:104420000007A0000007C0000007E000000800002F
+:10443000000820000008400000086000000880001C
+:104440000008A0000008C0000008E000000900000B
+:1044500000092000000940000009600000098000F8
+:104460000009A0000009C0000009E000000A0000E7
+:10447000000A2000000A4000000A6000000A8000D4
+:10448000000AA000000AC000000AE000000B0000C3
+:10449000000B2000000B4000000B6000000B8000B0
+:1044A000000BA000000BC000000BE000000C00009F
+:1044B000000C2000000C4000000C6000000C80008C
+:1044C000000CA000000CC000000CE000000D00007B
+:1044D000000D2000000D4000000D6000000D800068
+:1044E000000DA000000DC000000DE000000E000057
+:1044F000000E2000000E4000000E6000000E800044
+:10450000000EA000000EC000000EE000000F000032
+:10451000000F2000000F4000000F6000000F80001F
+:10452000000FA000000FC000000FE000001000000E
+:1045300000102000001040000010600000108000FB
+:104540000010A0000010C0000010E00000110000EA
+:1045500000112000001140000011600000118000D7
+:104560000011A0000011C0000011E00000120000C6
+:1045700000122000001240000012600000128000B3
+:104580000012A0000012C0000012E00000130000A2
+:10459000001320000013400000136000001380008F
+:1045A0000013A0000013C0000013E000001400007E
+:1045B000001420000014400000146000001480006B
+:1045C0000014A0000014C0000014E000001500005A
+:1045D0000015200000154000001560000015800047
+:1045E0000015A0000015C0000015E0000016000036
+:1045F0000016200000164000001660000016800023
+:104600000016A0000016C0000016E0000017000011
+:1046100000172000001740000017600000178000FE
+:104620000017A0000017C0000017E00000180000ED
+:1046300000182000001840000018600000188000DA
+:104640000018A0000018C0000018E00000190000C9
+:1046500000192000001940000019600000198000B6
+:104660000019A0000019C0000019E000001A0000A5
+:10467000001A2000001A4000001A6000001A800092
+:10468000001AA000001AC000001AE000001B000081
+:10469000001B2000001B4000001B6000001B80006E
+:1046A000001BA000001BC000001BE000001C00005D
+:1046B000001C2000001C4000001C6000001C80004A
+:1046C000001CA000001CC000001CE000001D000039
+:1046D000001D2000001D4000001D6000001D800026
+:1046E000001DA000001DC000001DE000001E000015
+:1046F000001E2000001E4000001E6000001E800002
+:10470000001EA000001EC000001EE000001F0000F0
+:10471000001F2000001F4000001F6000001F8000DD
+:10472000001FA000001FC000001FE00000200000CC
+:1047300000202000002040000020600000208000B9
+:104740000020A0000020C0000020E00000210000A8
+:104750000021200000214000002160000021800095
+:104760000021A0000021C0000021E0000022000084
+:104770000022200000224000002260000022800071
+:104780000022A0000022C0000022E0000023000060
+:10479000002320000023400000236000002380004D
+:1047A0000023A0000023C0000023E000002400003C
+:1047B0000024200000244000002460000024800029
+:1047C0000024A0000024C0000024E0000025000018
+:1047D0000025200000254000002560000025800005
+:1047E0000025A0000025C0000025E00000260000F4
+:1047F00000262000002640000026600000268000E1
+:104800000026A0000026C0000026E00000270000CF
+:1048100000272000002740000027600000278000BC
+:104820000027A0000027C0000027E00000280000AB
+:104830000028200000284000002860000028800098
+:104840000028A0000028C0000028E0000029000087
+:104850000029200000294000002960000029800074
+:104860000029A0000029C0000029E000002A000063
+:10487000002A2000002A4000002A6000002A800050
+:10488000002AA000002AC000002AE000002B00003F
+:10489000002B2000002B4000002B6000002B80002C
+:1048A000002BA000002BC000002BE000002C00001B
+:1048B000002C2000002C4000002C6000002C800008
+:1048C000002CA000002CC000002CE000002D0000F7
+:1048D000002D2000002D4000002D6000002D8000E4
+:1048E000002DA000002DC000002DE000002E0000D3
+:1048F000002E2000002E4000002E6000002E8000C0
+:10490000002EA000002EC000002EE000002F0000AE
+:10491000002F2000002F4000002F6000002F80009B
+:10492000002FA000002FC000002FE000003000008A
+:104930000030200000304000003060000030800077
+:104940000030A0000030C0000030E0000031000066
+:104950000031200000314000003160000031800053
+:104960000031A0000031C0000031E0000032000042
+:10497000003220000032400000326000003280002F
+:104980000032A0000032C0000032E000003300001E
+:10499000003320000033400000336000003380000B
+:1049A0000033A0000033C0000033E00000340000FA
+:1049B00000342000003440000034600000348000E7
+:1049C0000034A0000034C0000034E00000350000D6
+:1049D00000352000003540000035600000358000C3
+:1049E0000035A0000035C0000035E00000360000B2
+:1049F000003620000036400000366000003680009F
+:104A00000036A0000036C0000036E000003700008D
+:104A1000003720000037400000376000003780007A
+:104A20000037A0000037C0000037E0000038000069
+:104A30000038200000384000003860000038800056
+:104A40000038A0000038C0000038E0000039000045
+:104A50000039200000394000003960000039800032
+:104A60000039A0000039C0000039E000003A000021
+:104A7000003A2000003A4000003A6000003A80000E
+:104A8000003AA000003AC000003AE000003B0000FD
+:104A9000003B2000003B4000003B6000003B8000EA
+:104AA000003BA000003BC000003BE000003C0000D9
+:104AB000003C2000003C4000003C6000003C8000C6
+:104AC000003CA000003CC000003CE000003D0000B5
+:104AD000003D2000003D4000003D6000003D8000A2
+:104AE000003DA000003DC000003DE000003E000091
+:104AF000003E2000003E4000003E6000003E80007E
+:104B0000003EA000003EC000003EE000003F00006C
+:104B1000003F2000003F4000003F6000003F800059
+:104B2000003FA000003FC000003FE000003FE00168
+:104B300000000000000001FF0000020000007FF8FC
+:104B400000007FF800000CDF0000150000000001ED
+:104B50000000000100000001FFFFFFFFFFFFFFFF5B
+:104B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
+:104B7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:104B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
+:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:104BD000FFFFFFFFFFFFFFFFFFFFFFFF00000000E1
+:104BE000FFFFFFFF00000000FFFFFFFFFFFFFFFFD1
+:104BF00000000000FFFFFFFF00000000FFFFFFFFBD
+:104C0000FFFFFFFF00000000FFFFFFFF00000000AC
+:104C1000FFFFFFFF0000000300BEBC20FFFFFFFFFF
+:104C200000000000FFFFFFFF00000000FFFFFFFF8C
+:104C30000000000300BEBC20FFFFFFFF00000000DB
+:104C4000FFFFFFFF00000000FFFFFFFF0000000369
+:104C500000BEBC20FFFFFFFF00000000FFFFFFFFC2
+:104C600000000000FFFFFFFF0000000300BEBC20AB
+:104C7000FFFFFFFF00000000FFFFFFFF000000003C
+:104C8000FFFFFFFF0000000300BEBC20FFFFFFFF8F
+:104C900000000000FFFFFFFF00000000FFFFFFFF1C
+:104CA0000000000300BEBC2000002000000040C047
+:104CB00000006180000082400000A3000000C3C02B
+:104CC0000000E4800001054000012600000146C00C
+:104CD00000016780000188400001A9000001C9C0EF
+:104CE0000001EA8000020B4000022C0000024CC0D0
+:104CF00000026D8000028E400002AF000002CFC0B3
+:104D00000002F0800003114000033200000352C093
+:104D100000037380000394400003B5000003D5C076
+:104D20000003F6800004174000043800000458C057
+:104D30000004798000049A40000080000001038094
+:104D40000001870000020A8000028E00000311802B
+:104D5000000395000004188000049C0000051F80DB
+:104D60000005A300000626800006AA0000072D808B
+:104D70000007B100000834800008B80000093B803B
+:104D80000009BF00000A4280000AC600000B4980EB
+:104D9000000BCD00000C5080000CD400000D57809B
+:104DA000000DDB0000007FF800007FF80000193CD8
+:104DB000000015000000190000000028001000008D
+:104DC0000000000000000000FFFFFFFF40000000A7
+:104DD00040000000400000004000000040000000D3
+:104DE00040000000400000004000000040000000C3
+:104DF00040000000400000004000000040000000B3
+:104E000040000000400000004000000040000000A2
+:104E10004000000040000000400000004000000092
+:104E20004000000040000000400000004000000082
+:104E30004000000040000000400000004000000072
+:104E400040000000400000004000000000007FF82B
+:104E500000007FF8000005C700001500FFFFFFFFFE
+:104E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
+:104E7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:104E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
+:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:104ED000FFFFFFFFFFFFFFFFFFFFFFFF400000009E
+:104EE00040000000400000004000000040000000C2
+:104EF00040000000400000004000000040000000B2
+:104F000040000000400000004000000040000000A1
+:104F10004000000040000000400000004000000091
+:104F20004000000040000000400000004000000081
+:104F30004000000040000000400000004000000071
+:104F40004000000040000000400000004000000061
+:104F50004000000040000000400000000000100081
+:104F6000000020800000310000004180000052005D
+:104F70000000628000007300000083800000940045
+:104F80000000A4800000B5000000C5800000D6002D
+:104F90000000E6800000F700000107800001180013
+:104FA00000012880000139000001498000015A00F9
+:104FB00000016A8000017B0000018B8000019C00E1
+:104FC0000001AC800001BD000001CD800001DE00C9
+:104FD0000001EE800001FF0000007FF800007FF874
+:104FE0000000112E0000350010000000000028AD68
+:104FF000000000000001000100150005CCCCCCC56C
+:10500000FFFFFFFFFFFFFFFF7058103C0000000094
+:105010000000000000000001CCCC0201CCCCCCCCC4
+:10502000CCCC0201CCCCCCCCCCCC0201CCCCCCCCEA
+:10503000CCCC0201CCCCCCCCCCCC0201CCCCCCCCDA
+:10504000CCCC0201CCCCCCCCCCCC0201CCCCCCCCCA
+:10505000CCCC0201CCCCCCCC00000000FFFFFFFF89
+:105060004000000040000000400000004000000040
+:105070004000000040000000400000004000000030
+:105080004000000040000000400000004000000020
+:105090004000000040000000400000004000000010
+:1050A0004000000040000000400000004000000000
+:1050B00040000000400000004000000040000000F0
+:1050C00040000000400000004000000040000000E0
+:1050D00040000000400000004000000040000000D0
+:1050E000000E0232011600D6001000000000000081
+:1050F00000720236012300F30010000000000000DF
+:105100000000FFFF000000000000FFFF00000000A3
+:105110000000FFFF000000000000FFFF0000000093
+:105120000000FFFF000000000000FFFF0000000083
+:105130000000FFFF000000000000FFFF0000000073
+:105140000000FFFF000000000000FFFF0000000063
+:105150000000FFFF000000000000FFFF0000000053
+:105160000000FFFF000000000000FFFF0000000043
+:105170000000FFFF000000000000FFFF0000000033
+:105180000000FFFF000000000000FFFF0000000023
+:105190000000FFFF000000000000FFFF0000000013
+:1051A0000000FFFF000000000000FFFF0000000003
+:1051B0000000FFFF000000000000FFFF00000000F3
+:1051C0000000FFFF000000000000FFFF00000000E3
+:1051D0000000FFFF000000000000FFFF00000000D3
+:1051E0000000FFFF000000000000FFFF00000000C3
+:1051F0000000FFFF000000000000FFFF00000000B3
+:105200000000FFFF000000000000FFFF00000000A2
+:105210000000FFFF000000000000FFFF0000000092
+:105220000000FFFF000000000000FFFF0000000082
+:105230000000FFFF000000000000FFFF0000000072
+:105240000000FFFF000000000000FFFF0000000062
+:105250000000FFFF000000000000FFFF0000000052
+:105260000000FFFF000000000000FFFF0000000042
+:105270000000FFFF000000000000FFFF0000000032
+:105280000000FFFF000000000000FFFF0000000022
+:105290000000FFFF000000000000FFFF0000000012
+:1052A0000000FFFF000000000000FFFF0000000002
+:1052B0000000FFFF000000000000FFFF00000000F2
+:1052C0000000FFFF000000000000FFFF00000000E2
+:1052D0000000FFFF000000000000FFFF00000000D2
+:1052E0000000FFFF000000000000FFFF00000000C2
+:1052F0000000FFFF000000000000FFFF00000000B2
+:10530000FFFFFFF3318FFFFF0C30C30CC30C30C322
+:10531000CF3CF300F3CF3CF30000CF3CCDCDCDCD5F
+:10532000FFFFFFF130EFFFFF0C30C30CC30C30C3A5
+:10533000CF3CF300F3CF3CF30001CF3CCDCDCDCD3E
+:10534000FFFFFFF6305FFFFF0C30C30CC30C30C310
+:10535000CF3CF300F3CF3CF30002CF3CCDCDCDCD1D
+:10536000FFFFF4061CBFFFFF0C30C305C30C30C3A6
+:10537000CF300014F3CF3CF30004CF3CCDCDCDCDE6
+:10538000FFFFFFF2304FFFFF0C30C30CC30C30C3E4
+:10539000CF3CF300F3CF3CF30008CF3CCDCDCDCDD7
+:1053A000FFFFFFFA302FFFFF0C30C30CC30C30C3DC
+:1053B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAF
+:1053C000FFFFFFF731EFFFFF0C30C30CC30C30C3FE
+:1053D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7F
+:1053E000FFFFFFF5302FFFFF0C30C30CC30C30C3A1
+:1053F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3F
+:10540000FFFFFFF3310FFFFF0C30C30CC30C30C3A1
+:10541000CF3CF300F3CF3CF30000CF3CCDCDCDCD5E
+:10542000FFFFFFF1310FFFFF0C30C30CC30C30C383
+:10543000CF3CF300F3CF3CF30001CF3CCDCDCDCD3D
+:10544000FFFFFFF6305FFFFF0C30C30CC30C30C30F
+:10545000CF3CF300F3CF3CF30002CF3CCDCDCDCD1C
+:10546000FFFFF4061CBFFFFF0C30C305C30C30C3A5
+:10547000CF300014F3CF3CF30004CF3CCDCDCDCDE5
+:10548000FFFFFFF2304FFFFF0C30C30CC30C30C3E3
+:10549000CF3CF300F3CF3CF30008CF3CCDCDCDCDD6
+:1054A000FFFFFFFA302FFFFF0C30C30CC30C30C3DB
+:1054B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAE
+:1054C000FFFFFFF730EFFFFF0C30C30CC30C30C3FE
+:1054D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7E
+:1054E000FFFFFFF5304FFFFF0C30C30CC30C30C380
+:1054F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3E
+:10550000FFFFFFF331EFFFFF0C30C30CC30C30C3C0
+:10551000CF3CF300F3CF3CF30000CF3CCDCDCDCD5D
+:10552000FFFFFFF1310FFFFF0C30C30CC30C30C382
+:10553000CF3CF300F3CF3CF30001CF3CCDCDCDCD3C
+:10554000FFFFFFF6305FFFFF0C30C30CC30C30C30E
+:10555000CF3CF300F3CF3CF30002CF3CCDCDCDCD1B
+:10556000FFFFF4061CBFFFFF0C30C305C30C30C3A4
+:10557000CF300014F3CF3CF30004CF3CCDCDCDCDE4
+:10558000FFFFFFF2304FFFFF0C30C30CC30C30C3E2
+:10559000CF3CF300F3CF3CF30008CF3CCDCDCDCDD5
+:1055A000FFFFFFFA302FFFFF0C30C30CC30C30C3DA
+:1055B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAD
+:1055C000FFFFFF97056FFFFF0C30C30CC30C30C308
+:1055D000CF3CC000F3CF3CF30020CF3CCDCDCDCDB0
+:1055E000FFFFFFF5310FFFFF0C30C30CC30C30C3BE
+:1055F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3D
+:10560000FFFFFFF3320FFFFF0C30C30CC30C30C39E
+:10561000CF3CF300F3CF3CF30000CF3CCDCDCDCD5C
+:10562000FFFFFFF1310FFFFF0C30C30CC30C30C381
+:10563000CF3CF300F3CF3CF30001CF3CCDCDCDCD3B
+:10564000FFFFFFF6305FFFFF0C30C30CC30C30C30D
+:10565000CF3CF300F3CF3CF30002CF3CCDCDCDCD1A
+:10566000FFFFF4061CBFFFFF0C30C305C30C30C3A3
+:10567000CF300014F3CF3CF30004CF3CCDCDCDCDE3
+:10568000FFFFFFF2304FFFFF0C30C30CC30C30C3E1
+:10569000CF3CF300F3CF3CF30008CF3CCDCDCDCDD4
+:1056A000FFFFFF8A042FFFFF0C30C30CC30C30C375
+:1056B000CF3CC000F3CF3CF30010CF3CCDCDCDCDDF
+:1056C000FFFFFF9705CFFFFF0C30C30CC30C30C3A7
+:1056D000CF3CC000F3CF3CF30020CF3CCDCDCDCDAF
+:1056E000FFFFFFF5310FFFFF0C30C30CC30C30C3BD
+:1056F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3C
+:10570000FFFFFFF3316FFFFF0C30C30CC30C30C33E
+:10571000CF3CF300F3CF3CF30000CF3CCDCDCDCD5B
+:10572000FFFFFFF1302FFFFF0C30C30CC30C30C361
+:10573000CF3CF300F3CF3CF30001CF3CCDCDCDCD3A
+:10574000FFFFFFF6305FFFFF0C30C30CC30C30C30C
+:10575000CF3CF300F3CF3CF30002CF3CCDCDCDCD19
+:10576000FFFFFFF630BFFFFF0C30C30CC30C30C38C
+:10577000CF3CF314F3CF3CF30004CF3CCDCDCDCDE3
+:10578000FFFFFFF2304FFFFF0C30C30CC30C30C3E0
+:10579000CF3CF300F3CF3CF30008CF3CCDCDCDCDD3
+:1057A000FFFFFFFA302FFFFF0C30C30CC30C30C3D8
+:1057B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAB
+:1057C000FFFFFFF731CFFFFF0C30C30CC30C30C31A
+:1057D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7B
+:1057E000FFFFFFF0307FFFFF0C30C30CC30C30C352
+:1057F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3B
+:10580000FFFFFFFF30CFFFFF0C30C30CC30C30C3D2
+:10581000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8E
+:10582000FFFFFFFF30CFFFFF0C30C30CC30C30C3B2
+:10583000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6D
+:10584000FFFFFFFF30CFFFFF0C30C30CC30C30C392
+:10585000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4C
+:10586000FFFFFFFF30CFFFFF0C30C30CC30C30C372
+:10587000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2A
+:10588000FFFFFFFF30CFFFFF0C30C30CC30C30C352
+:10589000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD06
+:1058A000FFFFFFFF30CFFFFF0C30C30CC30C30C332
+:1058B000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDE
+:1058C000FFFFFFFF30CFFFFF0C30C30CC30C30C312
+:1058D000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAE
+:1058E000FFFFFFFF30CFFFFF0C30C30CC30C30C3F2
+:1058F000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6E
+:10590000FFFFFFFF30CFFFFF0C30C30CC30C30C3D1
+:10591000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8D
+:10592000FFFFFFFF30CFFFFF0C30C30CC30C30C3B1
+:10593000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6C
+:10594000FFFFFFFF30CFFFFF0C30C30CC30C30C391
+:10595000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4B
+:10596000FFFFFFFF30CFFFFF0C30C30CC30C30C371
+:10597000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD29
+:10598000FFFFFFFF30CFFFFF0C30C30CC30C30C351
+:10599000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD05
+:1059A000FFFFFFFF30CFFFFF0C30C30CC30C30C331
+:1059B000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDD
+:1059C000FFFFFFFF30CFFFFF0C30C30CC30C30C311
+:1059D000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAD
+:1059E000FFFFFFFF30CFFFFF0C30C30CC30C30C3F1
+:1059F000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6D
+:105A0000FFFFFFFF30CFFFFF0C30C30CC30C30C3D0
+:105A1000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8C
+:105A2000FFFFFFFF30CFFFFF0C30C30CC30C30C3B0
+:105A3000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6B
+:105A4000FFFFFFFF30CFFFFF0C30C30CC30C30C390
+:105A5000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4A
+:105A6000FFFFFFFF30CFFFFF0C30C30CC30C30C370
+:105A7000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD28
+:105A8000FFFFFFFF30CFFFFF0C30C30CC30C30C350
+:105A9000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD04
+:105AA000FFFFFFFF30CFFFFF0C30C30CC30C30C330
+:105AB000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDC
+:105AC000FFFFFFFF30CFFFFF0C30C30CC30C30C310
+:105AD000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAC
+:105AE000FFFFFFFF30CFFFFF0C30C30CC30C30C3F0
+:105AF000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6C
+:105B0000000C0000000700C000028130000B81582B
+:105B10000002021000010230000F024000010330B9
+:105B2000000800000008008000028100000B8128AE
+:105B3000000201E0000102000007021000020280E2
+:105B4000000F0000000800F000028170000B819837
+:105B50000002025000010270000B8280000803382E
+:105B6000001000000008010000028180000B81A8E5
+:105B70000002026000018280000E8298000803800B
+:105B8000000B0000000100B0000280C0000580E8AA
+:105B90000002014000010160000E0170000382500C
+:105BA000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC35
+:105BB00000002000CCCCCCCCCCCCCCCCCCCCCCCC35
+:105BC000CCCCCCCC00002000CCCCCCCCCCCCCCCC25
+:105BD000CCCCCCCCCCCCCCCC040020000000000041
+:105BE0001F8B080000000000000BFB51CFC0F0032A
+:105BF0008A59051918F484117C7A607E4ECAF43BE8
+:105C0000F232303803B12B103700F1616E06862373
+:105C1000DCC4EB3F2B8F6007CA3230D402F17E69BF
+:105C200006062B3984B8A10203C312203F0D2AF6C1
+:105C30001A4817CA53E6EEC182555431C51495115E
+:105C40006C552CF2C8580D4DBE411995AF4E40FF12
+:105C500040E3641D54FE042D08FD5E1B42A7A0C94D
+:105C60004F84CABB42FD95AA83DD5C3722FD9DC6E9
+:105C700082CA4F40E3B730A2F2CD38D0DC0F550FC7
+:105C80000000174B67C80300000000000000000080
+:105C90001F8B080000000000000BED7D0D7854D52F
+:105CA000B5E83E3F73E6CCE4CCE4242461C2EF24A3
+:105CB000841034E21022064BEB097F869A7A07AAF9
+:105CC000985AC5012306082452F5E1D37E9948026B
+:105CD000011106B53414D4E14F692FB6918B965A51
+:105CE0008A033E2DB6BEEF059FB57AB57DD152FC35
+:105CF000294ACABB52FBAEAD6FAFB5F74ECE39CC19
+:105D000090E04FDBFBDEA59FDDD9E7EC9FB5D7DF49
+:105D10005E6BEDB5CF78483E29B89C904FE01F2DC3
+:105D2000FF9741087DD4577A7412CFBA98909C3C63
+:105D30002BDE534EC8D03C2B452AE973530B7BA571
+:105D4000FE7EA23C9C332B04EDDAF2AD10A163B4CD
+:105D5000E5CC2331182BD640480121AA4EF09F688C
+:105D6000EF31E7EAA41C1FFDF513F15E21A4DD2C41
+:105D7000CE867EEEF10949127289BD2E1322C6A489
+:105D8000FD7C02DE12FA208F107F959CBCA288C297
+:105D90005D924C41DD0833B80F17BD523386AE63B8
+:105DA0005DB51CF186A1F7AD844C2664058C45EBEE
+:105DB000EB2676D78CC983F76A04DECE54F6B66A32
+:105DC000B4BD5142B07D70623CA5613FCB28A4FDBB
+:105DD00072180824A76C512D091262CED0FAE1C2C4
+:105DE000FFB770FD066FA79738DF1B64FD1F95098D
+:105DF00050EB25D18BE8F8535DEFCB66BD0DE31A70
+:105E0000843E2FE3CFE9BAEE873F0A09F91209E48D
+:105E10009DC8A27F5F4A2E053C909A5C42A69C8D4D
+:105E2000BF7EBCC591BE8430BA68A4EF1FD241E7E3
+:105E300074B862464FA744D7ED8BC8C44B1FCD52F0
+:105E40005ED48B012F4715C4C3BA3A86E77533E495
+:105E5000645CC275D616D2FEA309C363CEF862890C
+:105E60001413B2B185D6C79D8DE7EC928405F4F783
+:105E7000951009F82A9B3E1B42D7953D35857C330A
+:105E8000BA8AE193DCCDF011A7FFFBA4B81F9FD91C
+:105E9000029F1127BEB2393E736A6CF882E755142F
+:105EA0008F13E0BD138F49F883E2AB5EE0319F8C26
+:105EB000453CC67311BF03E1F10A8A832C0ABFFF78
+:105EC000556FD25BD48F57C11702AF26C7EB8699A7
+:105ED000BD3A30C3468BF1392129490EE178925CF5
+:105EE00085EBC3B203F0E6C5FEF85EA7301B7C9ECF
+:105EF000309DC75F9640FCEB141D4324E053435292
+:105F000081AF814FD3CCBB4E4FEA126DBF69AA4C13
+:105F1000805EEB2C998469FD74999A5400EEB8D593
+:105F20001DB2F1A901F8A7F8BA8FE3471B213BF096
+:105F3000A9E6F95D7CEE5CC7A6BEF5597C5D6C1DDB
+:105F4000A43BD901709C99299375D2C0E30E842794
+:105F500031EE80F0F598BE1298F70525B28EF2DA90
+:105F6000BA70B243A6F8DA3883E1E36CFA7EC6F978
+:105F70007A7BF5924ADB7C915EDD2CFF02E62139CB
+:105F8000CE7555993E33ADFE3CBF7988B960743407
+:105F900090991E9F1BFC610ABF0D4F7AD894607CBC
+:105FA0007DFC3D3AA8784276E8A017DDF39C05AF6A
+:105FB0006B5EF73C6A49B3A562CDA987343341D8FB
+:105FC0003C16DBA7087BAE821EA1FAC71F71EA113F
+:105FD000B7FED64638EB6A15D3D72AB13D2F02ED6E
+:105FE0004EF5CB85A45F4F570E4EBF10AB01E17548
+:105FF000EB93315CAEA7EFEDA95329FD4BB6093DFC
+:106000007DF72FCA687D37E8695ADFDD0973D1B2A1
+:10601000CBA9A727F0C1CABFF3920C7A7A47063DF5
+:106020005D9CB0A6819E2E49D08D808E53BC9EE98A
+:10603000E9E28E6619E83481EB097280E149A7FF35
+:10604000B3EBE9623ECF986D4E3C15733D5DBEDF0C
+:10605000F59CEBE962979EDE087F507C154A1C8F09
+:10606000634929E271EA20F73B8E47F77E570C73AC
+:106070008FA1787C90ED7739790C8FED1D3201FD81
+:10608000707A9B8CFA715C51548676424F72D0487C
+:10609000195FFF4EAEAF059C636698D5A04C4B8848
+:1060A000590DF4D1D693482A0C7ABA310EF36C4AC2
+:1060B000303D5D922072CC6607691C9E4DA1DCD9F3
+:1060C00020D7A7136A0496B98B8465BDA81FAF7D3E
+:1060D0007607C7E3D7A095431E9C74CCE17875E39F
+:1060E000675CD2C9DF250FBAE8B1DE59CF71D1E5BF
+:1060F0004AC9657F0C921E5E95C4BDB9504FA25D22
+:10610000A7D3B5E6D3BAF22FCF5AC0D746277BA67E
+:1061100075C8C922CAB7813656F774A8C96A5ABF6A
+:10612000218FF1F5D83849825DA784A204ECCFB164
+:1061300079547FD8F0E9E1F81474833F011F63B804
+:106140007D913D33D707FCBD298FE37B06C33755CF
+:10615000803ED07F02DF1E8E6FA3B21BC023B3C36D
+:106160004E7C4F3AEAD437D7D60D71D4AF890E3F63
+:10617000277D3C9C8E1E4E27C14767E13FEEB20F44
+:106180002B9D758F8B3E2D924BEF0C923EDA115268
+:10619000067C3B4EF64776149DDD2E21C948373AE2
+:1061A00079F2389D7F0135E3B2E9F8CB48CF28403A
+:1061B000D001238CE32C977B0AA07E8AF46E1E39D3
+:1061C000A67FFC512A392051234EA2E85D49411A8D
+:1061D000A693545610C18EEA05B874C48B44FFBB15
+:1061E0001EF94495015FC34DF69CC4B355A887883A
+:1061F000F817463A79F99F852B9FFFB344F128F1B0
+:1062000052013A8E01FCC4506FEA2481753FE9C205
+:10621000D220DD5806A9A686D224A604652E896060
+:10622000492E483E9142FD79B789FCEEFB1DF924C9
+:10623000AB7F3DF7C29F14AFC348F47109FC273A06
+:106240009EAEF4F3A18FF321B5D3906F7593F1ADAA
+:106250005E42F7D372947BF45FDC785ECBF5F28616
+:10626000161DCBF52D262E7268281997297D7CB531
+:106270004C8FE4847A3AC06FF137AB912B68DD6FB5
+:10628000F4BE7A13D87BB76B917B68FDF0CCE74303
+:1062900050EFB8DD60F6611BB353FD1C7B1D637BC3
+:1062A0007B5651B836DCAE47F823873EDA30BEF76E
+:1062B0009D9DA0B76EF34700BF9B4247C2AB405EB7
+:1062C0009A3594176A7B22FDD657FCA208EDB58F4C
+:1062D00029FC943E2842B4BFFE116D3589B61BD10E
+:1062E000DB82767D7377B59287EFE38170FF7A3B2F
+:1062F0008A87E1FEDF71642D09D3973995710BF020
+:10630000E52BA3A62CE5435FA529C50D90CAD8EBC4
+:1063100012E53FFF8C18B128FE0221B3157845E73E
+:1063200074236A2204F2EBC667C7C87868219D37D8
+:106330003E5E8BEC46B632A57969DAF5E17FE61D63
+:10634000D75969ECA96C5942FE3F327E11FABD5E05
+:10635000120B65814E2AD3C86E0AE7BAF18B46C785
+:10636000D2D87B3639E3F64AFA32533F4D21CD5D20
+:106370003678C6CA32F29F24EB4C6E43948FA85CE9
+:10638000E5988C9FB419C44AA681E3720EBFAEC6CD
+:106390008989F6B529819DF545E1EB5D89C1B9563D
+:1063A00022755D69DE6F0778F2413EEE4EC1FE98C0
+:1063B0003D93F135FDCFEAA2F0E7A8AC14ED6B38C0
+:1063C000FC7B78BFF3D043050F027F940FCEFEF223
+:1063D000C2BC69E09DF829E6DD48E79565139F0B8F
+:1063E000BCBBE9294A49F6E1FACE8CDF1C02FB343A
+:1063F000139CE1DB50B79370332D87D2B29697266A
+:106400002BDDF39DEF785F96D93ADCE3925DCC9E6D
+:10641000F2F3FDEBF094572C85D26D749CF0B88AA2
+:10642000537F8C2E93D15FDDB4876EF845A03F5823
+:10643000FD915D24A950549EBEFB1E19E01A49ED42
+:106440007C683F84C464C05B11094B500A3DB88628
+:10645000EBC10F49F43A391FF47417DA45B595B713
+:106460004E4B1737AAE7F2713EFBD45768B9408FFD
+:106470002E82F18DC8318BEEE4447B31BD5CD1EDD1
+:106480002A34D7260F44117CC1E4A99DF33BC8CD23
+:106490001C5A9F777D7A3837CDD48631BBC52C44C2
+:1064A0007F47350BE7DAE471532B952BFA3E09E36E
+:1064B000D9E4E0BB7C7DAD5C1ECE871F6B6869466E
+:1064C0002C4BA1AF6A92891940B7ABA5D86A998EB7
+:1064D00053D11C7956A575634FB7E567CFD7C2F383
+:1064E0007925CDEDC01286D54D40DF3E72F70A0BFF
+:1064F000E8787A045D7A1A3B4194AA253BEC147D36
+:1065000084DF690F0D521E2F8824A601BC65E1634C
+:10651000D5B961A0536C1BD069C4D1C86158A251D0
+:10652000772C956FA357D8646523004DE1D7E2948B
+:106530006E488F6808E8B198447742FF406594C57B
+:106540002B07094726FE0F8798DE0A737E6F8F5050
+:106550007E97FAE5C1CFE5A19DBF3F5D49D0BF68F9
+:10656000CFAB30D3ED1782DF05FF0B7DE86E77F8F8
+:1065700053F0F9785A961213FD9A0F49EC39C0037B
+:106580005D3DCA9F16EA42FF4EC8556DE4D88C2186
+:106590001047AD0C5728B6FDFA7DCE770B74EB97FC
+:1065A000D07FDEF50BDAF3291EC6DD4D22A066AFE3
+:1065B000BD7E01B1F3FBAFFBDA475F42F9BABB1B0B
+:1065C000DDD281FA75F3F55D2D455FB3F3211DE74B
+:1065D000751CA7A43B2EDBF44E0EC7B332B38F3F1E
+:1065E0004D10CD9ADB122AD0A7A236A248B6755C10
+:1065F0005BE7B4E729BFBF03E3BAF9741E69F690FD
+:10660000F3D83F4649B15E80B7B6A4BB0DE0D34294
+:1066100051F4F728DCA7E1F91700F727E782FB1D03
+:10662000887580DE8C545B43C2089FAA5C027E544E
+:10663000AA2D3F0C783FA602DE299E35C586E7C10C
+:10664000CAF9FD7CBF1848DEDBE00FB49763790A16
+:106650006D3F4467724A7A8E11E67739E397C26ECE
+:106660000E8608C659736A7B08F86B171F55D0DE73
+:106670001D5A4B24B0C3845D3BC475DEB001EC668B
+:106680002A3FF7B58450882E367A8FC239C08642A9
+:1066900099D9C753CE0C83FE3FAAEE09813F6856B5
+:1066A0009D59775318ECED30B65FDB12E1FB4F15C7
+:1066B0009689DAB7F6ECA4F36F08F9D15EBEB7A5F8
+:1066C0004CC46B11EE2122DE5BCBEC7B11171670F4
+:1066D000D1FE3A0FB63ADA93900D6FC5B6FE61A6B9
+:1066E0006F06EA9F55E9C47B5F7F6B70FD21DE6F0B
+:1066F000EF5F6DF51C85F89CC9E3FE42EF05791B41
+:10670000B34A46FF59E0D95BE68CCB25F8FC99F8F3
+:10671000C53D1F09FB1DEB27F106846F05978B4CC8
+:10672000E3B473FD28EA1E92DE6E5BA6F07D929FB5
+:106730004B997CAE1F594E7C5C2CE87790E3CF647C
+:10674000F22EFC1A8C0728F6F9D83AB08E719A38D6
+:10675000D3C72EF8457F8DF7CF0487E61EEF381D8F
+:1067600067B26D1C179C99E0739F9391779CE364CB
+:10677000D65FAE7E27074787B3FA119BDC633DD710
+:10678000551FE66A5FEC7A7F81EB7D85AB7E99AB26
+:10679000FD3457FDABAEF6735DF5EB5CED17BADE7D
+:1067A0002F71BD5FE1AAFF5767FBF2C59F0EBFFFC8
+:1067B0009FE149C8D5D978493ACE79DD72554C5216
+:1067C000A352B4DC91F3E22278D5A348EA099847B2
+:1067D000C4B7486A82DD8FFDBD11FB1DEC633B3EF3
+:1067E000B6FC512A57BB122F05617F13CF4F4A6F5A
+:1067F00004C787A97DA8A596B3785002E5C64FD4F3
+:10680000B77ACA804A12C6D174A31E51AE97D0E798
+:10681000367DE52551A4B336C2F99C24981C9640D8
+:10682000808A8E17DFA4A1BD171F499263419EF392
+:10683000D8F8D8BEB81FDE492AD34FA168A21A647F
+:1068400078585DD76128DD780A4D8F4F7C9EEA65C8
+:10685000F200F3CB77CD74FAD5D7F171E6ABE7ED63
+:10686000A7BE3249E91F7FD7B78D482B6DB20B8089
+:10687000A0F5F8B7F524C4374641BC8E1D2260BC94
+:106880006E24E1FF785C6E04FC4DFB8D348E62FC5F
+:106890002DDC601E019DF775B514E17A44EA1D0FE9
+:1068A000F3C9592727B2F3BDBF7E82F1788EAFD0EE
+:1068B000BD937BE2104FD9A845C6229E238867EA84
+:1068C0008FB7792B804D187E57C1EECB9EAB815C84
+:1068D0003877E1F400FD4B4B1FF013EC8B2485F56A
+:1068E00000E9C17A36B773CBD4225C7F0EF7330947
+:1068F0008948607F84AE4CEF9747A5EA32F592FE57
+:10690000B8A51466F14969FDF37F9620AE5546C2DD
+:10691000CC7EE171C2B58AF409C45FCDC1D98BA127
+:106920006F3AE94AD46632C7E65F5EAF0A3F8FE14D
+:106930006B4C88AD3FB4516B06BF66D76C271F8880
+:10694000F6EAF9F3C1E60963BE383EC855C764E00C
+:1069500083EB4D88574B718AB7ACC1E3CD54AC6F14
+:10696000AAB84E82E3FE40B26EB0D75562DDA8E60B
+:10697000F7D77FAD4417C2FBF83452D66CF48F437F
+:106980009FDF0CEDD23C6F48D77E1C8FDBD2FD1908
+:10699000F7F152AE03866E3365B0278B3A57F8EDA8
+:1069A000792EA57CBF7EAC739F0FD6BBB5F1DCF60C
+:1069B000D17D2DC8FC19DB05A5EE28D0835CA29201
+:1069C000DD69CEB17FCAF9BBAFBDCB3E9CD116AF5E
+:1069D00086FEB97532817834DDE7D1BE2BE27EEDDB
+:1069E000E6A97149A372F8C0168276726EDB429FE7
+:1069F0007D3D857C3D9B6B0BFC60B76CAF5FF855B4
+:106A0000F413A8FDAFA0DF1B5B07E317D6B0F37E3E
+:106A1000377CF7F2F525EA199EDCEFB334124B27E9
+:106A2000873F55F9F9834ADDC782FE73947B0FDFF8
+:106A3000F98BF174BED22A39E20BF7C339AECF6EAF
+:106A4000EA417C655DA69AEB400F776A0E7B73FB8B
+:106A5000B6FBB7D4C3B91F7D0EEAE0D12F370F8B39
+:106A600052B81EFBDAA2171603DFB7CB04F49180ED
+:106A7000C32877DABB47FAE4CC392F1DB71AF15295
+:106A80007F6EFFE9D3E2630B97F34C7CE2DE57DDC8
+:106A90007C703EFBC355CA675FDF7E90433A6E0150
+:106AA000F7FB86D685A51EA35F8E849F22E629E08C
+:106AB0007C965B7BBF0FF86C4B5D05CACFE9DA852E
+:106AC00012E8934DD0328D9E10F3658227CB93C090
+:106AD0007C892DF5F74BE9F0561863F122F7F36A3C
+:106AE0000FA3F37A352141FF4CED467BB8BEE67229
+:106AF00055C8D7159A9A8A02BE0A222AB987E2EBAC
+:106B000081DA85D5A5C077540E21BE32A386A0BDFB
+:106B10005068B1732293E2EB69BAEF6DAE2791141E
+:106B20006DB7D9D2F01CC62D876E7EDC5C7F6EFD02
+:106B3000422C5B7BCAFF1E8FC1CE734B4809D853D2
+:106B40000F0CE0BF0D16BFA17A99C54B67540CA07E
+:106B5000CF5BCF378E39EFCBC08F33069907E0D2AA
+:106B600017E4D92DB34BF3201E42F50549871FA723
+:106B70007E18081F6EFC5F0CF8BCF08BC3A7FB7D72
+:106B80009E87C70107898FF575C5FF03522633B568
+:106B900077AF47F41379615F21BD0AC8BF051C3A7E
+:106BA00006BC8A0896334814CB636A2CEAA1ED67C9
+:106BB0009166ACD79004968B5593D199E7C188F331
+:106BC0006E753AE3FB719792249C3B93A973F9612C
+:106BD000B06A9DD00986523F49E35711720F8E3734
+:106BE000DCB51F8B38C5D0C6446D051D77782DCB1D
+:106BF000FB1C5EB5CFB18F05B9FC88F1B6560D6EA2
+:106C00007F7ED4B53F3FAAF6E8409F47ABEE69854B
+:106C1000ED46CD7D2794AEFFB84E275E377CDCE590
+:106C20008BA681676BFD011FE48D6DAD4A9F17EB4D
+:106C30008623D3FB7119CE99BEE265E74C5B73F4F2
+:106C40006FB0649D958EBC04A21845F679B77E4C52
+:106C500072A2E7D4274E79D9E8E1F921011200FEAA
+:106C6000CF840F517ED178786C5AF392689AFEA542
+:106C70005E2637ED39240EE7D28FBDA632FEE37AC9
+:106C800078F237C249B017DA414950FDFB5835E375
+:106C9000CFC939FCFD4361CCAF1ADE49E21ADDCF22
+:106CA00086BF5AFF400E6D775F3DF5206DCFEFAB8D
+:106CB0007CA903CE899F7A59C6B8EE645FB71EA13E
+:106CC000F054F17D706BFD4B989F1CDFA646C6A269
+:106CD0007E97883419BD79A48780F7198FCAE85642
+:106CE00079BF2F0CFB57B8478F50FCDC3EE5253DA4
+:106CF0004CCBFB46A47458E7FAAAFB91CFF7D51703
+:106D00007FBD14D1EACC3B99A54CEDB6E87CEBEB0A
+:106D1000D9B95D4E4F4AF7429CB54E255750F8827F
+:106D2000065BEF7DED24798F047030FA4A640EFA29
+:106D3000C585AEBCAE0257DE9B5939EB5DC86731E5
+:106D4000E19C1F16A1343E7011E8DB2699B95BAEB9
+:106D5000FC68A3D27A17F2036629077D907FB5A558
+:106D60004D3571FF738DEB5E874962872D09C789A9
+:106D7000831FB8E541B64F9A138D483C0C5D39DC52
+:106D800026857B089DB2CD09B7C0AB7B1E77DEF5AB
+:106D9000BB829F8793B1A08744BC59C0EFE6DBBCA0
+:106DA0008AE4FE97281C5B5F3670BFDE5AF5D23747
+:106DB0009B609F2FF362DEC457CFEC69FC112D7FDF
+:106DC000F9C70325505E59B8ABB289B60BF07C0900
+:106DD00011CF2B8091D17EE57A8DF30329DFDEE69A
+:106DE000C9C347984771DF111FD2ABB04D4EFA802F
+:106DF0003E6A8A007FE55D9640BBE9BEEBBA31E9A9
+:106E00002250D725C56D721610F643634C82F3FBF2
+:106E10002BEA12B3810F0D9E47684412681FCD54B0
+:106E20005ED431CECEE966723884DCB9E9525A9F1D
+:106E3000D2212F65789B1A0170873736CB202FA57A
+:106E4000552C6FB9B4B34BE279C2984F3F8E237182
+:106E50005CB481E5156E63F817F9DFC14627DD4C98
+:106E60009EA749FD0C19FCEEA24ED7FB680DE66308
+:106E7000BAE95AACF1BCA8529E47C8F1309CDBB3CA
+:106E8000EB1BF9F99CA127CF65CFEEE3E7734761D0
+:106E9000FDE3CE7E3F2983DEBD0AF42ED5378A9CE2
+:106EA000EA40FFED3219FD37371C1B1A99BEDBA5EE
+:106EB000C90EFBFDB3CE7F03D7FB8ADCD301EBFC0D
+:106EC0005BCFDFD8B7FEBFCFFC77FD9DE75FF777DD
+:106ED000C6FF96BFF3FAF7FC8DD75F532639FCB394
+:106EE0001D909842C7FBB157C4D39C7A5B91D3FBEA
+:106EF000D96F69B2239F58E4294EAFB31668783E24
+:106F00002E137BFE8B186FA6F24607E8D32D5C9FED
+:106F1000523D4A205F207B8AC89761FAAF86EBBF5B
+:106F20001AAEFFF665D0AB15902B96877605DE0777
+:106F3000994412E8C7048FAA9867BC8FD0ED05F476
+:106F40005AD89B362FBB80C3EDD6A7055C9F56BC95
+:106F5000E87ACEF5A87B7F2FEA8B9B128C9BFE777D
+:106F60008DEF8F2EBD2AF0B0A58AD9C97973D3DBF6
+:106F700081EB5D74342A9B31FFC04D8FB734E67FBF
+:106F80000B7A2CD0ADD7B5FCCCF4EEE1F4BE9CD39B
+:106F9000FB571AF33F44BE48267A5779D93C9706E7
+:106FA0008E875A6135D16AA483C2E9A490F5DD18B1
+:106FB000F725B713BB5FB9E1636A7F507A6C358CF4
+:106FC000C83DB47E691E9145D2FDC793FBF3893D50
+:106FD000DD2C7EAAE4692E3FCB6DFFEA9837BED543
+:106FE0009293F122B023766C5D0E76C4CBFE08C47A
+:106FF0000BB6E674BE887E5C62920A70087B91F0E4
+:10700000B82C981204ED26F7B993D3DEDFFA715746
+:107010000AEC2EB348C2785F47F8FEBCB4F7F15CC7
+:1070200076BEE10D38E206E48AC1D9EBAB38BDA9E2
+:107030009F98EFB5C5295705664D62E7E6334C3892
+:10704000DF91AC5932C4D1338D0311DE13B6F3A6F0
+:10705000C5AA3512C693C06F2CEBF71B0919C1E204
+:10706000F262FD83BD3FD0B8989D7B73BCE65DD6D0
+:10707000F5B9F88FC2DF17ED0C6AAFA5BBBFE3F619
+:10708000C36B3CD614EF258387FF116038DAFE8589
+:1070900072A5265DDCA087EBD7C0D1AED973E9FA23
+:1070A0002A5FE4717D6AB6D9CFD3EECB53D3F6FF16
+:1070B0003997935FC1E548D4EBA978BE84F92404DD
+:1070C000D625E4D13DFF443EEFC4CF38FFCB5CAEC4
+:1070D0002772B9262482E73099E6ADE67A43949F79
+:1070E00076DE1EBEEE6ACDE471DF73CF3B87AF73F1
+:1070F000CE675CEF493EEF9C41AE77019F6FC16761
+:107100009CF7233EEF8241CE7B2BC7EFAD9F11CF83
+:10711000AA2EF1710687E7563E5FEB679CD7E4F332
+:10712000B60E72DE4D1CBF9B3E239E47F07937B9E9
+:10713000F09C497E777CC6F9CA74263FBBB8FCBA7E
+:10714000F59A983F502847A1FFD6101DC7A6A7AEB5
+:10715000F4B2F94549529FA0DF3A9C9FE74E597E11
+:10716000C7C27479E1A2BD7B3FCE34CF37799C464C
+:1071700094629E203F079D72199D27CDFA44FB899A
+:107180007058909F79FC251C9E25E7B90ED1BE5AF8
+:10719000637A36D3F8777238EE74C13FD0F8A2FD27
+:1071A0009C01E0EFE070749C27FCA2FD8201C6FF09
+:1071B0002E87E3BBE709BF687FEB00F87994C3F142
+:1071C000E879C22FDAB70E30FE931C8E27CF137EDC
+:1071D000D17ED300F87996C3F1EC79C22FDAEFEAC9
+:1071E0009377A7FC19E2FB06115206F7BC47117F03
+:1071F00004BF6F10E9398CDF3758A985F1FE799704
+:10720000FB5E94ED3E1515F1C37796C6A1FDC38BC9
+:10721000599EF2C31309FA110FE7B3BCFCBE7816EE
+:10722000B7071F9E28633CE9E190338FD9E0FED970
+:10723000C3111E2719C1F2988D72719F964E57C0C7
+:107240004DC430E4D3B0FB55C2DE13F7AC56A97C75
+:107250007E8B245B69FF87CB597DEB0C92948B6C02
+:10726000F7AFCA52780F080C5B88C3F6DF1FB3C8AC
+:10727000CA0A5B1EC6CA14E619A83C5F8422843879
+:10728000F2315CF7B6C4B9E135116B26A8B9A24A50
+:10729000768E571475FA0F8D70998BB6FF2DD79394
+:1072A0006665FA7B357B75169715F99A57F3F50BDA
+:1072B000BC55707A6E98F3C7EEE9749D2F4CF5605B
+:1072C000FEE80B47391EA72A49766E4E3CE9EEE3ED
+:1072D000648AB3199DCD477C143FD7BC482240C671
+:1072E000C036AB3D8C71B58F91FF30AE46E7BD66C1
+:1072F0005B4205FE9BDD199E0EF1C0AB5F0CAF82B9
+:10730000EF0A8CEB24110BD0FBF1B7709CDC36122A
+:10731000493252B59A2CDEE78CCF897BBF3C3E07C1
+:10732000616ABB7F399BAFBBA2CD6C8723BB8A1937
+:107330005E87FD3A9BFB99FF64791D7EE66C7E7F3C
+:107340007AB6CBCFECD49DF13AA3333A13E2DCCA40
+:10735000D5C72C1DE08F4A265C4BB921BA498573ED
+:10736000E4D9DB9AD9BDDA0CE75AD90FCD0DD8EDA7
+:1073700077718EFDAB6DE7B6D7459C41C41D5EE1CC
+:10738000F7F15EE679C57DF9289C3F72AF961C7CCB
+:10739000D2A9333DD2097C92FF9F7CF279F3C96F69
+:1073A0007467FCA113DE51792C8DA43F9F6FD0B57B
+:1073B000FF94D72F800E415F7A3A90C66C471EB17A
+:1073C000C8A772E36D0DC79BA8EB19EEBD8CF0F159
+:1073D0007DD6EDD7BF11AB867589380D2177B9CE33
+:1073E00035A746CE159750C4B98FFC8602EB29F31A
+:1073F00071FDA31215C777AD03E5BE00F20D390C80
+:10740000AEF1DA415F78FBD7E529895A12DE1725FC
+:1074100078CE07F9EAFBCA617F341DEBB67C6CBFFE
+:1074200059C7EF0BAD2B5393592CAFCAF9DDA2927C
+:107430001D7A3ABB4294702FD59EE7E186572B897F
+:10744000C5EDF0681C1EF7387333C2D3E0887F9D0A
+:107450002F3CDEF1847403DFAA948B917FBFE51883
+:107460004F2E4B929E7471283E0EDC55C375B9E8C1
+:1074700092697E7D8433FF49CB73DE4F518D5C571B
+:107480007E948BBFFAE242839B4F7CCF6735E783C4
+:10749000367E1FC5DDDFA72648240DDE7D61771E01
+:1074A0004612E9E00D39BF3BE0315D70BBC65F0FAE
+:1074B000CFD2E4DFB8EF57AE5593686FC5299890E7
+:1074C000E7D9CEF9523593782FEB3B3E29EDFA49B7
+:1074D00024FD7EAB96A487DF7D2F48CBCB75D221D0
+:1074E000C3FDDBB542EECD5D16F00992260CFFE739
+:1074F00096F3839173EDE759426F49BF513EA14B1B
+:10750000DAED737D2F6190F4553F1A029756FBEB2D
+:1075100054AF42BC96CA08E6F1BADB1F13F87B638E
+:1075200007C22FF474D636914FFBE9D601B906ECA9
+:107530007CDCD93FA31C723DA770BE7E6E80F567D0
+:10754000A2AFBFC49D4F3838FAFA40EE61DF532D29
+:107550007E88EE94FB4CF31193ADF77CE5FED3C22D
+:1075600039A42646409F69A11889D17DBE309490E8
+:1075700020CE6048BD71F0C7A84C8581CE1BE1527A
+:107580005DBEB3DD34DACF5324C73DD9207F91C32C
+:10759000D03E1E225DD07E7D9E5AB3A3BCBF9D21EE
+:1075A0009128F0BB91AF46E1B9182F7BAA733C6AD2
+:1075B0002628F67B58EEEF2D78A630FF54A376E808
+:1075C000F674FAC4CFECD0AC677D78AF2F1035924B
+:1075D000C092859549CCE32C6C2011F0E74A3BBB67
+:1075E000498C0EBA96C3515899C0FC80C26D093CB3
+:1075F000B7CFF39266D8970B1B13D202DB3C657EA4
+:10760000C6DFD3E6EAB84F7CAB9ADDDBEB0E2D4C40
+:1076100054C37C55ECDC2B90A79261141F8157BD9D
+:10762000CCFFACEC816F49B07C11FAFE9D16525133
+:107630003F9690F75A742C4FB698589A1FFFCF1068
+:10764000E4B7B45F32390CF90867020DA361DFF8C3
+:10765000A02584EFEFFB76240C7944CA91D7F03B48
+:1076600012FDFC1E574815E4BFF658403FDBFA7781
+:10767000F86CE7FC7DEBA2EB5D40E7B957926F84B5
+:10768000F9A0BE10F95457B4028EEF30C333D89727
+:107690009E76127DA21CBE6792946E2DB73DF75167
+:1076A000BB0DF6D74B4CA47B3F3E93AD1CDF13C103
+:1076B000DF2D7C91E3756ED539CF4DD6B7A4BA676F
+:1076C0008CEDAF1B19EEBBCDF54CBBDC4FE7990938
+:1076D00097D8299F4F9F5B3614F0F5A0C7798F5C30
+:1076E000948A392952026DE38532CA21FFDECA8AA3
+:1076F000F1E1A139B6F16772F895233F41FC669537
+:1077000027C477776A0B6D79FF23620DEC3B7ECD42
+:10771000EC7E8C38871C7D7D4F2B1C498C5EE9BC30
+:1077200037338BDFF32C6A9731EFB5680AEA505292
+:10773000D44A30BF6AA712A900FE7E88BC9C632988
+:10774000B02B1332928A6A51DC39CECE45B5CF4385
+:107750001C40DC1B5DD5C6C61B158E1C0D43FCA44E
+:107760005C467B793489E830FE68432670AF680C4C
+:10777000B18D43EB239B9DE3BAE12D0AC8F8DD02EE
+:1077800001CF28B25FB7F2707C92A4FD4750376FEB
+:10779000781AF8DCF38C11ED2EAAA8489134F392F4
+:1077A000DE5638173A6BFE01C66DF1F7E5DF05418D
+:1077B0009F6F93D8FAE32F2891DD40D75BF760BC29
+:1077C00066C48A4EDCD73BFDCCBE5B4DED01C303E6
+:1077D000760A2DC766E643C5A488CBC6FD232DFFD8
+:1077E0003DE6AFDEE88778987FDA46E043BF1ABE11
+:1077F00016E8E13FEA21708EE9B712287FA484D908
+:1078000019F796176783BCF99BB5B4FE5A9BDF83C3
+:10781000F06DF34B2AE48352DEC275A98DE1EFCE01
+:10782000A2D5FF966F3D02F3BC9F1FC3523C0F2DA4
+:10783000AC0B037F4EBFA51CE35FA73B258C7FBD30
+:107840002D253548D15E7A75F3842B283EE6E4C4B5
+:107850001E857E8D75DDCFB333DAE652F0EB6A21FB
+:10786000CF2F1FA68B337F70C45B1115EE838D5015
+:10787000539E207CCFE7C8ABAC8C5703BFEB7003A3
+:1078800086D2335862BD0B7E5380DF3F52486F5C17
+:1078900002FF682A216FD9E8063E9DBD0E67BAF641
+:1078A0007A26FC0F54D6D3BE6F8D855D3E62496843
+:1078B0001724D97710CCC8048053091D2D28B1EDA9
+:1078C000735EBE3EEFF485FC7B4916F76F22C4EE73
+:1078D000DF7AF9BA4087BF65EBEF0939EB8AF9F92E
+:1078E000AE43D8DDD2337F3901745CF5A407E39E43
+:1078F000D39FF4A42EA7F565DB25DC67E4434CAFEA
+:107900007FB04B42B94F0534D403EF9B3AD69BBCB2
+:10791000DD1BBE44EBBD4F2A6407A2A50EBF2F7529
+:1079200042ECA707587D117790966D3F3C1FC66BC0
+:1079300038E025B04F2CFBC92D577D89D66FA17C2F
+:107940000C4D96ED6ED586D1FAE2A4D405F553D34D
+:1079500008F2593C574B425ECBA96077C13506EE21
+:1079600063243C0ECEB7BB0BAEA6FCB824F9C42CE6
+:10797000E8B764AF049154BA8EDDCF1752B8967D44
+:107980005FC2FD71E99E2C12B6E1F3045DCAE5F415
+:10799000FD0ABA4ED087B790C42CA0D7B2DD9B3475
+:1079A000FB3EF75E4B19A67E88FAB2EFD37968BF2B
+:1079B000E53F9422B0C4E590EF00FBE54F7C753BBA
+:1079C0000D585FAB561A8075ADD1A0DD2DC9054F9E
+:1079D000F9C200DF766D167DBF64DB766D5139E04C
+:1079E0008DDC08FBEAD23D1792B08DAE273A15F434
+:1079F0001756E4E83BF07BA286159A9B261EF25EA2
+:107A00000B71C0B584EB0DEAF769736CED9FCACAC0
+:107A1000413E5DBA4771CC23E81F3F46D83DB49F35
+:107A200005F01E9AA09FD8AF04FD56880FE5A9BDAA
+:107A300093D3C103DFD5027812D4BF81F2FE961032
+:107A4000960FB684914E9B018FE3585E0A3CA77255
+:107A50008BDFF30B5AF0A129B88F625543FE656E98
+:107A600094D50BAE8F49E173D8E9A2DCEC892D00E7
+:107A700023676AD6F766AAD41FDBACC56E8590B5BE
+:107A8000A9EE983983EE798D59D1C959B673BFD50E
+:107A9000FC3B3217678571FDAB0B35C4F7E61B263F
+:107AA000EFE4F127DC2737DFB0E851888FD3FE5FA2
+:107AB000C902FF829FFF65EA5F30BFCAD1BF607E07
+:107AC00083E83F0BFBEBE7EEBF79FE65CEF9E72FCE
+:107AD00011FDAF42F88D73C35F70E354E7FC373696
+:107AE00062FF262FA36F6F8E8E79D66DBE48CA03B4
+:107AF0007456097E875ACD2DDD01EDC4BE432D4B52
+:107B00000BF2B68DBD3915EB889D8FA6CD073802D7
+:107B100054BAEC7C945DE577C8558E95EBA80FA917
+:107B200019E6689F1F2D76BC1F5A77818B2F0DBCDD
+:107B3000B78875000A0C730AA7364C437D543D8CF8
+:107B4000D9C1771CF261FD8ECBD8FAEE1866A01C65
+:107B500003CCE097DFA1C52EB67F2796AE4B82C33C
+:107B60009C9B8DD89DB08EFEE761199EFB79BE93DC
+:107B7000DF4B50DFAD299ABC336EC367C748CA0FCD
+:107B8000B4DE96A531BC733AAC19B92864B7D7579F
+:107B90008FD4EAC0DF80E73719305F7435CCD7A4C3
+:107BA000F59682DDE19EC75B5CE598471FD580F3C3
+:107BB0006CCA62F154318F7754836B1EBD6E077FA0
+:107BC000CEE77900F82CD33C6B8A2F73AE67D412C2
+:107BD0009CE761D73C6B462D71CDE367EBA1CFF9F4
+:107BE0003CC973CDE31D33D5B99ED18D38CF3FBB92
+:107BF000D733BAD1358F81F3C07398871ABE61F835
+:107C00003E96E6ED5D84F47FC687768EE68D3D86F2
+:107C100076CEEB3EB473682B0BBFA355C6FCDBDB03
+:107C2000B272913E67FC94FE869DCE719E7710479E
+:107C3000BFF8660E22495288A87E5BCE79B07EEFEF
+:107C40009C51AD501E981E5A00FEE883018CE37DC6
+:107C50007060BA76531A7D7473C273A2C7C6CF7DA3
+:107C60007A95C7634359EC1C52D44FF0F8CF5B10A0
+:107C700027A2E5DB1E82FED0711E2FEA87B715FB17
+:107C80009DE0E77A27B6B17DEACCA663ECBB3971FB
+:107C9000F272F964F81E0DFB777322CBE18F377116
+:107CA0007AF4FEC49BDC81F4B086E3777F3B8738AF
+:107CB000E285BF39F4B5E759DE1D190EDFCBBBAE47
+:107CC000E389E7A0D92BD282912BE87AEBF66FF209
+:107CD0000CA7F50F3C3DF323866D9C3A0FDEBB17D6
+:107CE0007EC837621E87FDFCCD0667FD06973DFD09
+:107CF0004656B1389F65F386931EA0D73C3863A5DE
+:107D000024BC014A4CBE33915EF34DD657C0D374A8
+:107D10009787A470BFEBC9C738673C1FE33431B104
+:107D20006FB9E09BEFD1AD28A5E7FC3B15C4A31BC1
+:107D3000DE9E4359964CFD9C9ECEFFED81FB3B039E
+:107D4000C17FE34AE77B12F738BE4320F8E0DABA96
+:107D5000EA9DC76DFCF18DD8EC9DC71D789AE3A80C
+:107D6000DFD0FC0D47FB1B572E70BC5F105FEC781B
+:107D70007F53C7AD8EFACD893B1DED6FE96C75BCA5
+:107D80005F9C5CEB78BF74CF26477D59D71647FBC5
+:107D9000A603DB1DEFE543E3FF09FDC05F2978CFB4
+:107DA000F943E3C406B0DF3E34D977FEDFE1E7777D
+:107DB000EFF1EFFD2C07DE9B02F2334907BFA1C9AB
+:107DC0004FE599DA12138CFCD51D53418F10FCA49A
+:107DD0004685317C759C3ABB53F8BD44A55323A915
+:107DE0002170BCD21F87ED55FADFAB3DF4FDA4CC6A
+:107DF000EF954E35ED7BB5474D3BEE29A9B714EC19
+:107E0000C7F86BDEB4F7BFFBE5920C87FD22D3FB0E
+:107E1000933269B0FB6FF30C161F7A3E6BDA3C03AA
+:107E2000FC218DC97BE3BEC269E037346AA9D274F4
+:107E3000E7367DF37549F89DC079069397C549E704
+:107E4000F76F97EE19E390FB57FDB16B0CDAEEE498
+:107E500061857D2F2FF5ECA8AF5F04F35BF3E0396C
+:107E600039908FFBE32B2DD6CEE3D40F78B5A50642
+:107E7000CB7F6D89EE3C4E1DB5375AEAB0FEDB96DE
+:107E800018963D2D0D58BED5D28CEF8FB7ACC4FAE5
+:107E900089963896EFB47460F95E4B02DF9F6CE907
+:107EA000C4FA072D492C851C087B9744B93D290E3F
+:107EB0004C08AB9FE66B500A441C3382DF8F3A6D4F
+:107EC0009C29053BFAF4AB5ECCBBCD842737DF653C
+:107ED000A69F85FBFDA2A433CE2C4A9F9FD1C72726
+:107EE000931AC891583B56C3389AFF990BD11EA7D5
+:107EF000CF55C2BEB71CB17F4FA26F7C481E1E3A41
+:107F0000309D44FB13DFFBF7C90BCB813EC58827AF
+:107F1000FFB34A33A3DBCEC8D72F1A187F68F315F7
+:107F20009E8D47E999DF8C82F8D4FBF9029FDDA38F
+:107F300020B8A51AD12DC087A7F77B715DA70F6662
+:107F4000B17C1408AA0D22FF75E91E5FD2AE1F9600
+:107F500075E5249DFAA23069D717A78FEE0C82DC55
+:107F6000AF0829C9E393803F2CCE1F8CEFC4F8CB18
+:107F7000BA8A9286631C67FD7442AAE9C2B858386F
+:107F8000FBEA34FE87285784349CE7BD3D6330FF0D
+:107F900080FA89C9E32CDE9964F3869276BE6C5C24
+:107FA00099953C3EA41FBE4CE37EDEF011B29FFCCF
+:107FB0004ECF7C0F77A092A8FFA6E1F72D0F7ACEC7
+:107FC000C0BEE3A5FF7D82F9422AD6C5B84D5D4A01
+:107FD000DC0BF778C95EC77CB45F58F8E8F6EFE6CB
+:107FE0009C4D77673EF86F819770DF66F7CA6370C4
+:107FF000AF9C8E774A353AA48BFBEF953771BE5C08
+:10800000A6F76831FAE8FDFD63CE990FF25ECB5119
+:10801000531D0B790409FC604443D7F819A01FDFF6
+:10802000DFBFAA00E2694B95D377A4BB2FFB91C1B8
+:10803000E26C24E9E9EDB1AD47C46708A1E3EAFDCC
+:10804000F003A79FB0D5DDFA5A947280C5DD97EF93
+:108050003D36EB4B14FEE507FEA8011C078C981C6F
+:10806000B0AD5FE2F7EA97EC795383F5BDE389970A
+:10807000DE750E3D75369C46C8711E1A27DD20C779
+:108080000BD96F30003F5DFB3A15CD777FE921F0CA
+:10809000BB0EE2BC42DC7BA827D120E06BE1FEA551
+:1080A000181F7EF7A92BB93D97980CFCF13E916BF8
+:1080B000607DEF939782936CF82B09303F86743084
+:1080C0003B46DC0BA4F6ACC3AEB9A5D3595F44E67E
+:1080D0001680DE58F4A007BEA14A1613DBF797E816
+:1080E000BAF302CCDEBD8534AF067B4EF532FF60BD
+:1080F000A149D4E1549F2EFBF14393C1EEBF30C0A0
+:10810000CE1D451C63712EB3F796E42535384FF824
+:10811000DDFE49F3BE04DCE74DAE867D9964A73FE2
+:10812000FFBBA9C309DF40F0BBE115F7DDCF8AA78C
+:108130007038943D52DAFCB42901CE775C8FDC13A1
+:1081400070DAF96B5CF5DA008FB32A44013ABF6F3D
+:10815000EA71391BDFE3FDDAF83E6F645518BEA7FC
+:10816000158D027F51BB6002B1B5FBBD11C3E7277E
+:10817000A51717E1FD72353501F3F174A2DA7F8F8F
+:1081800041F10727908B214EDA8C4EFD2A5F700754
+:10819000D45707D83DA8269053B83F1D9C7514E2CC
+:1081A000FA3A49A4AC2238FF76C6BF7D61673D0B21
+:1081B000E409F4093C007A4408C68BB2CA9CED027B
+:1081C00011677D491F9E528AFDDE47503752F87B6A
+:1081D0004D55EA49BBDDBC5C67F013F89E2A6D7F04
+:1081E0001BB7E79793701CF316438C0F6E9BCDF271
+:1081F000266E0B84F15EB2A45A783F620D74B5ED21
+:10820000634D1F492469D3EB4D6AAF067CD9F491C5
+:108210008ACF1F3662DF06BC6AC4423B57A7488339
+:10822000F36BD5A871D8BD6404FF2EA02B7F617DB0
+:10823000C074F87B422F78B85EA4FA624D201FF418
+:1082400060EF2C76AEDEA3B1F31DD64EEB6FB71EFA
+:10825000E0C8D4CED7DF6E53BA76CB7EFCF853712C
+:108260002AEF4B7EF49D201CA6BDAB260A20FFA161
+:1082700071777B10F8F81D351E8475BF9B4C9FF7F6
+:10828000FE73AEEF20DF09EEC92FE7747AEF07F730
+:108290005E05783FB3DB83F7EC9BF678535E4AC408
+:1082A000E5FB17337EDAE37D93D5D7E0EF2E341D5F
+:1082B00070CADB92C7BE5310C6C3BD38F31B490A50
+:1082C000EDE7E5BB7E3F0BEC9126D28B7AC2DD0F4A
+:1082D000E6FF2817F7AF0570DFDFFD5EE45B357161
+:1082E000BE6FDA7F2FE65535ED9F8D79544D2E39CF
+:1082F0006FE07EC88180F37736043E4892D9C5ABE3
+:10830000BEFFDD096F52784EEEFA655072C48F9849
+:108310009E38DD75D3234F8733EBF70FB85FDFDF70
+:108320002F89FDC207981D4F0EB2B2D1930A82DF8A
+:10833000D4B8DD13A11A84343EBEF3D1EF017FBF60
+:10834000E6C578C3D2C79F7BE5325A5FFA8427AF70
+:10835000962DC3803C604117B8DB0EF9BA820E4BF4
+:10836000FEE5392D7C117B7E776E3F3D963E715840
+:1083700023179D8DBFE95D8735FC4E909B2E5D6F69
+:10838000CE02BB7BD5F7FFA4817CBD7B4822438B0B
+:10839000CEEEDFB0FD39B4EB004F48474EA73EBAF2
+:1083A0009D45AFD4554F57623B13F6B181E8F53D7B
+:1083B000E0997CE4EB1F3E0DE705FFEA8D001E1AF5
+:1083C0007EF8AD20ACE76DB599F1F743ED05708E01
+:1083D000DEE089179858B2E70D0FDF8E7C77CBB1BE
+:1083E000DB0B581E9455C87F17A010E380DBAEC18D
+:1083F000752E2231E4BF868794289C937DA8929A9B
+:1084000027D2C8C7E541A6C7DEDEE1C58FDEBD0DB8
+:108410000A17FCC5979424BB6FCBF2126F17E71EA7
+:10842000F0DD465AFF5067F4CA0FCAE27B56BA83A2
+:108430006F77ADE9063ABD37D21A0AF14A8A873812
+:10844000C79B047A4839367328A31309AB93793F45
+:10845000AA27A7C37368DFEDB17C131CFDF8BEC665
+:10846000E6BF8DCF4FE1F6837DF67601B577D2ACCE
+:108470006F6950C83FB53F6C7C66937326F7BBD6D7
+:10848000323917729F9C5303EFFFED652647D00FDB
+:10849000F6790A576A28BE3F7CB5847AC14B52E907
+:1084A000E47B9787CBB7F33DF5CAD1BE157C42E19B
+:1084B0005761DFEAE71776CE4BE980F6DBA2076962
+:1084C0007FBB7D0EF3623BADFFB96DBFBF85EB8314
+:1084D000CB82AEDFDDD9963FA8EFE4357A928F7E6E
+:1084E0000FE497CA2BEC3F8D8F7B304FE40F7B9FBF
+:1084F0007DE53ACAE77FE81272EBD4A76EB96DD872
+:1085000077094927B77F302224ADDCD2E769E5D669
+:10851000E8417EFE5BE95381BF8541679E93D08F22
+:1085200099F0E8D68F7F0D84D9EF22B8F423FDF7B8
+:1085300032997C361F0AFE137CB7E49F97E1EF83E4
+:10854000F4F1A7E0BF3EFE14FCE75EAF137FEEF749
+:108550001782A122E2C5B4F4DC43E20188A7FE4CF5
+:10856000C178EA290AD36A4AE7537B8BF01E71BBB4
+:108570008FF9E7A7CCDE606E397EFF06EBBDF9DA36
+:108580006AD017E279AF8FC5BF4F457B83F63C9029
+:10859000370F2A4138EFEA49929A74FE08D5C80885
+:1085A000470FC9F49EC58B4F81FD07F3F94725811D
+:1085B0006E331563D44AF0F313ECBE7C7DEBB5410A
+:1085C000C853387570CC46D05F37BFA010FEBB854E
+:1085D0002AE49BDCC4E9FF0E896F9E4AD779D34118
+:1085E000E657D4AF4FCF2F4B78FB45C66D1AE82521
+:1085F000EA17BC658F872FE1BFC7D4B0CDF5FCE08B
+:1086000095C8574B5C7C15E37EE3E382AF269289E5
+:10861000DC6F93EDF96C3395F28D60979C3ACAE26A
+:1086200090A70F2A488FD37B2596FF04F1E029C03D
+:108630000FBD9A3D8FED24F05F9AEF1BF4BD7FF2E2
+:108640003793EFA24D1A9F7A7DC2565A9E7CEAB5A7
+:10865000D29F42FDC7BF1EF53A39BBFDF4437FC62A
+:10866000F3EC5387BC08C7A9433F1F7517D49FF687
+:10867000E2776A4EDDE365F99F8702C9B1F07E2497
+:10868000CB175AF5B33F4D60DF7F6943BABD1A641B
+:10869000FED8E983FFFE5BC81F3E7DD01B86753484
+:1086A0001DCAC2F3ADA6A77D18A739F5B33F4DB6D5
+:1086B000E7337DD6F52CE7DF413C15207590A77C8C
+:1086C0002A879D1B34FD74CA4EB847B46CFF610DF8
+:1086D000CE63A63FF39709A0774EED63F6C4079EDD
+:1086E0009E87E19CF577C11BD77820BE0BFBF53048
+:1086F000425AB29357C48D747861783845F100EBD3
+:10870000A27869007D99091FFFE71F161F7F9C0F44
+:10871000F3371EBC14E5A61F2F92C59E079270B5B5
+:1087200089AE9F3D3FF4A709601FFDA1AB15F7F986
+:1087300081D65D98FDFFDABAA5D460D65DF50FBB92
+:108740006EC6FF87826196F7E79283B3F9FCC7771D
+:1087500060FD878108C23B48F9AFFB875DFFA7A496
+:10876000FB3E4AF7E0C074FF2FD9EC5CF81F6FDDC9
+:1087700003D1FD054EF780097908A77EF6178CAF67
+:108780008BF50FB4EECDFF41D72DECA175722451BE
+:108790005C0479D8A9EEB004BFC3333701612985E1
+:1087A000E75DBBE17A3E9BF9178AC4E23664248B0D
+:1087B0001F11EE6FF4FD5EACC1EE57A9C66AF63D1F
+:1087C000323582DFD55B77C1C208E676908A57637F
+:1087D000501F31157FE7D6ED77B549C492A8FDA7A4
+:1087E0005EF0D5A360FF7BCAE4947702966F42B92E
+:1087F00086C7BD3CA6E6F0370C979FE00B3BDF7BBE
+:10880000F9783AA948C0EF77EB866A26E9FC463545
+:10881000FBFD68C8ED4CD8CE0DBDC4D69F8EB70306
+:108820007E93C5664F9E2FFEFE94CDFC4F45AAE871
+:1088300086BC58325E66DF3527EC5EF1BA1191E4F2
+:108840003AF443997FD98FCFD5DD80479550FF907B
+:10885000AD0FFD4AC2FD49950FA196C996CFD98E9D
+:10886000FB4B03D287D1635423A7CF0A073D04FEF5
+:10887000D3D0C5410F81DFF3A58B9B1E6EBCFF22B9
+:108880009BC5E7DC7472E483E433BF24450DE49FA9
+:10889000EFDD897191F77FF0E655D07EE94F150243
+:1088A000BF8BF6C1DE004981FCAA490DFCAC25FB5B
+:1088B000158C0BFF5F8242FCFF008000000000006F
+:1088C0001F8B080000000000000BED7D7B7C54D561
+:1088D000B5F03E73CE4C6692493249662633793103
+:1088E00049208246980408A82813020842AF038A48
+:1088F000606FD49167304F90B6B4D51F0389313C77
+:108900006C83220F4B7540545AA90D182928DA415F
+:108910001E62AD5FA3D25B6CB137E203150829ADCF
+:10892000FDE8BDF672D75A7BEFCC399389686F7F2B
+:10893000F7FBE7CB3F27FB9C7DF65E7BBDD7DAEBF1
+:10894000ECB97409FEC63376495C196B66CCC55820
+:10895000EDCF5319733276CF9EA4C8F442B8EEFD22
+:108960006038BB9AB19E55BD4773E17EF8A78AFF78
+:1089700029EC1EEE1E7E0BDCBF476377054B63E3DD
+:10898000C86BA6C3C4D868C6CEEE4F9913B133A640
+:10899000EC3C78278DDB31DB9CA4C4FAD91C669AA9
+:1089A00017FA05F079F8274A6488D27F3CC656F258
+:1089B000F17EA270F8F6992336846FE7364B08E013
+:1089C00068DCF9274B00E0A8FAF9CFD2BA61BEC63D
+:1089D0007D2A8B0E65F47789E173359A349CAEEF6E
+:1089E000E395B1805DA960AC01FFF5C1B5B37E3AF6
+:1089F0004B836BC7DA3FA969F8BEF954B735F67EE9
+:108A0000EDCF5FDE1B06D4D43EFF4C9A0FAE9F75B0
+:108A10003D95C64A69BCBB2DE98C6976CDD01FC790
+:108A2000BD98D97F1C98973137DCE7B75863C76A80
+:108A30003E5FE7374E33848FC138126E58DF67F8D8
+:108A40008F97B1B18E54E7C757C1FF63D8984B2AAF
+:108A50005C776631764D7F3CC5F015E6F4FCD9E7CE
+:108A60008F87013F67F79C791CE1AFFBAF3F3FFE6B
+:108A70007DC01F7BC5E6780AD6DDF8D3DFA6217D51
+:108A8000E57B331D0ABDD793CFC25EE8D7F36E52A4
+:108A9000240CB77A5E3E5DE083F5F6ECFE9BDB07C7
+:108AA000FD97BD3C291BD7BFEC85AA6C661F188EAD
+:108AB0009E158C4592F47045888EBE7D30683634A4
+:108AC0000F886B1C3D0E751E2A4038CF9D48F2273B
+:108AD000219EE0DEF272A40FD069386FDF07F86DD7
+:108AE000D8F5E09FD4E189F01CCE357990AE1F4CCB
+:108AF0004638198BE6320FE2B7B7D561EFDFBF8F8B
+:108B00005EC7819E23BE02DD76ADE6F37600DDD240
+:108B1000FAD3ED1CFE03F46944BAA5C4E8F6390B98
+:108B20003DE12D86766716D13511BEA25F015F3516
+:108B30000A1FFF7A47E07B0E949F3D297DF49A8EB1
+:108B4000F4FAD9E7050CE8FD89B9F74E368AB1DEAB
+:108B500097931CDBE1FE3D2FFF8EE4A4E785B72C45
+:108B60004847F8B32BB0AE1ED6F7D785EB6C50C490
+:108B70003A77A44693D262786F88CC98E24BA3FBF5
+:108B8000EFD3FD08E75FC45F2ED22772F0562501B0
+:108B90003D3A1C45B40E1671D1BAEB77FCC1827C0C
+:108BA00023E984F451C622BDDE9F8CF7259DE4BAEB
+:108BB000E3C773201EC6E8E8B683CB617FBAF65AD6
+:108BC0005871227A01BCF81EC20BED9E6D499A9233
+:108BD000CEEFE7C13A7ACC6C4E07C211517E97882E
+:108BE000BE8CADA2F53C1B2F97627D9793CBCBC17A
+:108BF000FD8FE2E5C70E078D2FF173F68BC4FAF9EE
+:108C000028CA39C0BFCF1E3A82FCC39835F2218CE6
+:108C1000731753587A710C6F12DEB31A23BD7BF6AB
+:108C2000A76A240CEB6FED38447A365EBE615D8135
+:108C30008E04F3FD4ECCD7B0EFE070D443675FDD18
+:108C40004FFCD7B0EB7D4B18C639BAF3794B776937
+:108C50008CDF517F4774FAFBEC73078793BEC5F135
+:108C600013E89B0FC5F88D078CE337EEFA9361FC90
+:108C7000DA7087C561BFFC3C9F6981D9B8DECFBA85
+:108C8000CC0CF5DF671DEA944882795F17F64BE25A
+:108C9000A9F52D0BD9B1516F274792004FCBDE9A22
+:108CA000F28774275E2D3E402DEB5CC9F9AAF3FED6
+:108CB000402ED2A5F3AD6FAA684FF6221EAF888D65
+:108CC0005B71BCA92A15E4B6E2647014B255BC3ECF
+:108CD0001873C264801BE6C946FDDC02E3F8601C21
+:108CE000A6F93D4118574D9B3C05E1511D26872DA6
+:108CF000A15DE5E399ED411602B8CC60B77D3A7EFF
+:108D0000F2CC4C1BCED271795E13EA85A5C05EA869
+:108D10009F3D16365403F89829D9FF148CBB74581C
+:108D2000A0EC08B4972EF0F8C3F0DC7B0B7FEF9C2F
+:108D3000C31E368DC0764104E528E5A2CA7CA0FAA0
+:108D4000CE2ABF5EC84025A408BECAED48213B9389
+:108D5000A2F93655433BA546F30346D947F6507E64
+:108D6000860BDFB3D07BDE0C45FB18D79DC6D250F7
+:108D7000DEE4F8B29F1C9769D1E1B87E66651A03FC
+:108D8000BB92C738DCAA584F31EB5290BF9B67A407
+:108D90006DC7F6D6D41AB2FF05ACF76000E8F664EA
+:108DA000DAE463A8C7E05F13F6CB6F32DAF741CBA2
+:108DB0008DEDC2B01627BF3E5310F8AFB8CD78DFA7
+:108DC0005955B964901FE46C7DE7140DF4B77376C0
+:108DD000E5EE5CC0E9B4356FF3F63395655E681F68
+:108DE0005F5F3755033DE2FC4D655901B4CF3FFC51
+:108DF0009DA9F4BC1690742DA8FEF5574F0D97C68B
+:108E0000E4D60560A6AB24CF37201ECE05CFB6E250
+:108E1000D3FA597FB5C023FC0B221EF2C7723CE483
+:108E2000D94FEE66D07F90A97B25F2E5132FFFDFA7
+:108E30000CECE7630E5AAF83B5383EB6E2E2D9D800
+:108E40004B23BF4C9F69EC63C9876A4C0E5477E88B
+:108E5000E60CE0ABD6B943374D465D5BE727FE82B3
+:108E6000991D640F657F8793E8335FD007E1B402F3
+:108E70009F2DE05DD822356C61346EBB2548F66AC3
+:108E8000A203E753C275EAA5ABBE3E5CF3907F90A8
+:108E90001EA92C15EF6B753E82EFB02BB090F0E65B
+:108EA0000AD155DEF7CC9DE30B019E6FC808D6E0D2
+:108EB0007ABC0B2F16E03AA667301AAF6A913D8054
+:108EC000F6F5C201508309E44B5EB7AF607E6DC812
+:108ED000C0CF8399A16FE3BC45BFF4ED3906E38DA4
+:108EE000986FF1DB608A11CB47F9B52CC61784FE69
+:108EF00087A09F07698AF2F76D1641F93B9FA4048A
+:108F000002D03E7FAF83F473DEFCE9C7D0AE9D4F45
+:108F100029EC88E2FDEFFB482EC11350502EF20FD2
+:108F2000A4476D69C4D77F8DE3EBBF1AF9D838EF3A
+:108F3000F94BBE7DDD349E438C078E113CCF17F478
+:108F40003AAF72FFFCFC0A1FC1016EE441B4BB5F83
+:108F500075BE4733843D15F4B9DF16D8887801FC17
+:108F60006FD6E37FEBC0747C42D0F18944745C68B7
+:108F70006D2A40FD704FB06332686E362323B40310
+:108F8000C73DBDF068AB19D6535FDD54824CDF9FFF
+:108F9000BE0AE973F781BB579AA1DD88F4F1F5A702
+:108FA000E388E565442F1D5D3B108E1107FE64428A
+:108FB000B8253D3729DC0EC4BFFF528622E6AD5BE3
+:108FC00069063C5ED86721FF37BEDF910C1FF59321
+:108FD000EDE1D60ABF06729A6D62A144E31EE9373D
+:108FE000AED59F9400FEBEF11C7C3CC0FB6B7ABCEE
+:108FF000BF21F56F7FBCFF1FEC0778A7EB57C0FBC5
+:109000003B5F8677E96FD70ABD50CBD6919FF95168
+:1090100060A67B30CC3B59B513FF2F7E4A25B98320
+:10902000FED3BDEE981E597C4DD3415CE7E21F2B69
+:10903000C4A7F3435CBF9F5938FD28EAF505ED4608
+:10904000BF69E11CD03300DFA2CDC6FB8B23717159
+:1090500020D3E973E08733317E1DC4F58C87ECA4FF
+:109060002AE4A16A51693AFA49AF987DBF213FFCD1
+:1090700075956D4F80F7FCCC42B2C37DED264086DE
+:10908000CEBEB3F93613EA4939EEC445A5D9E8CFC7
+:109090002C4DF57D69FC3568B9D19E178693994FA3
+:1090A000376E715BA6A13DA43DC7D0FF8ACD458632
+:1090B000E7C322571A9E5FB5B3DCD0BEBAE35A436A
+:1090C000FF11FB2618DA65D19B0CFD471E9B6968D2
+:1090D0008FEEFAA6A1FF9813730DCFAFE9BEC7F0CC
+:1090E000FCBA4F961ADAD7F77ECFE8BF9818E94551
+:1090F00096AC909E3CBCE2938A0F910147291311D4
+:109100009F556379DFC34B2C26471A5E4B4C0EE00C
+:109110008F57174C27FB7F78893BE0A36B4500E313
+:109120001EA68E1B154AE0DF4E727C5AF1A16EDE40
+:109130002AABD9A0D726398CEDF24C11170EE27C60
+:109140003326D328576AD3F4A8059A398B0767E3E7
+:109150007C205FD76672BD46D7AF205FE3B1DFE901
+:10916000B4682BB6A57C31615F2B051FC135602922
+:1091700047864A253B1CC09B3EBA1FD6203E9960BD
+:10918000F5E71DC1F598FC4E64BE89738287CD9CBE
+:1091900003B91D66434D5FC70E4BF9F6987C61B26B
+:1091A0005F998CF2495B1694A4331D5EE764F2FC70
+:1091B00011D87D7E75EC1CA949FC15E9EF4F19AD5E
+:1091C0000D8DDD57164DCF4679F30CA0072D9EE28D
+:1091D000613B40FF5ABC857495F75BE798A6441243
+:1091E000D0B536531170703F6B58CCCFAA257A7822
+:1091F000DEDE3804F0D550DD4B7E96C7D4BEE428C1
+:10920000AEEB572ACF93812785FA6081F09B174CEC
+:109210007D78C951D04B0BDE1C427A49CEB37545DF
+:109220007498DE3FC81B208E7A3A93EBF1C757043F
+:1092300086CD1F4270915E907E7941B87E32C637EE
+:10924000835813C5891B4DAC26D1380F8A71B29152
+:10925000E408AFC34EF2716EE1C9340DD6919C1A89
+:109260007A10D737774457058F0303FE99E07F15AF
+:1092700044EFD888FD0B3C1A8B28FDE7CFAE0EB526
+:1092800015C2FA5A324D7E3BB57B15EC9F741F63B5
+:1092900059D0BFE5BF5482A7E5D56B18C66749F61C
+:1092A00026867EAC5CD7A1CCC7083F6A670AD93D49
+:1092B000862E28E0EF5B82F69F7BE677A17FF1F9AF
+:1092C0000633CDF739ACD101E37FDEA946D0593F53
+:1092D0009A991C35415B6D4B257B5D803E27F45F81
+:1092E000D8991AF115C6F0A26D1EC7A260DF92F2DE
+:1092F000F8FA5B32ED117B21ADFB8799A36370CA4D
+:1093000075E70F1077BE22E06681A1063A7B210641
+:10931000EBC2B93570F6611C758399E2C205197606
+:109320008233B2223C6CBEB9FFFA5A3D336FBE1D88
+:10933000E0693EAE3215C6F175B7133E16023E2205
+:10934000BEFEF83EE72BFCAB4925B85F417AA99BEE
+:1093500027D3BA18FAF1F05EFD130A7BAC10F9328C
+:109360003485E89C63624F1526F00F50DE5C883F21
+:109370009E3FB0784AB89C78060FDB01E3FD2A7364
+:10938000407FEBCD4C6EF7E91AAF97C0FE85118E8A
+:109390000B9B15A2E76925623103CA6A6F8D1AEC2F
+:1093A000BE1A50C9DF88870BF4D8894C9D9FA3A6AD
+:1093B000DF371CC71DD83FDB7DD082FE9983917FAC
+:1093C00026F5E740FE19FA65C87FD22FFB384E0F0D
+:1093D000C3FA3E15EBFB34D1FA12E8DD1ED2BBDF37
+:1093E0008C26F46B5C96C47A29378BEBBB46878559
+:1093F000511E6A80BCBA2B4BFA71DCAF1848CF5DA6
+:109400002EDE285A5B4AFAF642972F3D13AECE0F56
+:1094100094A644E3A8CB9F1D8974596CAB4CCA0237
+:10942000F8EC5946FC6C59DDCF4EA567717CD1B57F
+:109430001FBEEC802F93015FCEAC2FF503B9DECDBC
+:10944000C1BC14CCD723F003FAF722E9DF5B7A6EB4
+:10945000C358B1FE962F449CCBFBBB859E8638F843
+:10946000868F7CD4FFCF48BF583CDC5D817150F3C0
+:109470000B57A4A31F3571EFED0EBC5E700E26BC1A
+:109480009CDB9B14C079CE6582FEB4637BCC51CC4F
+:10949000139C59712C538FD773CFBD55618671CEF4
+:1094A000ED79AB42C37C83C8A7C8E7F597DEA9086E
+:1094B000C2FBE1096C68935D475F2BD7EF1B6C3CE7
+:1094C0001FE1725B5AD908F06B5D19F4FEA36ED3ED
+:1094D0000FF0BE6A7DA7E04394E7B8FCCB06B3AFBC
+:1094E000D90E7C0E31961FF3F84B8705BC0B30FF6D
+:1094F00032C34379936685EBBDF0021E1F3A8BD8C9
+:10950000D04218CF6C52557CAFD7CBFCDBA14BD2ED
+:10951000E1F628AAA9E4AE8E00823F2A3993F07EB4
+:10952000DD598782FEBECCD768557CBCDE5996C813
+:10953000765D9EC63347233B96A27530D4ABB35CB1
+:10954000FC7D99AFA99A39275889703D60A27803AC
+:1095500014A582FA2B57ACA3D0BB67B5F4453437BA
+:10956000B215C3E40C5B0BFC3B18F09CE6330530F2
+:109570003F9A96173D61063F2CB785B1533A7F2F2E
+:1095800005990FD7F3A61AD90EF29FFAC578EB1CEE
+:10959000F0675292B9FCA4055B9760DE1AEFFF6B8F
+:1095A00039D285BF4FF451318DC4C2E90072EA58F7
+:1095B000E3B8927E9D2BACFEC1C0A87B5638E8FA7A
+:1095C000F40A0FC1F5F00A1F5D7FB86228DD1F485D
+:1095D000CE2E777D6805CCABE327E718C00AACD761
+:1095E000A93292C7874657A4CF4DA007E4F5B1151D
+:1095F000C7DC13870804023D72EA1CDBD614129DF7
+:1096000051686075AFAD0E8C63EC0173600903D6D1
+:109610007A20EB8B8998575AAB98288FD49A75701B
+:1096200075380FAF3E4EB743EF32CC477A47B52B74
+:1096300028AFDEBA76E283515D5D2C24EE07A0ED03
+:109640003DCEEF3F60E3785EC7D81484D7AEB0203C
+:109650005E7B6CDC9E7C6CE37AED53712DCC0A3D15
+:109660009C05F7FFE23851F20080672BFD7D01EE8B
+:1096700047A41CFA1BE56BD5E1162BCA87F7C0FB84
+:10968000B44FA19ABA2D0C4CE8F38FBC4BF92FD5EF
+:10969000122CE4ED9FAFC175B8D282DBD0C562E178
+:1096A00077A71EF680DC203F5C4BD808A31CAFB523
+:1096B0008976F8DF080F6BCDBCFDFC23BF5D1DA6CE
+:1096C000767031E205DB2D88978C0E8F09DAF695DE
+:1096D000EFAC3E763DB665FF77A8FF7359DC3E32AE
+:1096E0007BD08BFAA3AFED80F6D5BAB6C6DBCCCA79
+:1096F000AF727DF587FE763417F8B5E180D281A090
+:10970000790FAC57709DDE7DEB09DFF407F281CB5A
+:10971000A03CA6354C79AFA7571C73B4009DB5CCBF
+:109720003637E2FD0A4F281048A0AF7FEE92FE2A9E
+:10973000F4D7E7BF22E6DE6E9DFFEC655C6E580B4A
+:10974000E88704FE4091ABF23D27AC6383125AA335
+:10975000A29EF999D9817A8475713D74568CC5227F
+:1097600039E48FD4D978D3BC2AB46618EA893B345B
+:109770003FC6B9B585ED95688F6BF717FA57B218E4
+:10978000BFD46674B8CB917F328CED669117C9CE89
+:1097900068CAC828C5FD82F50598CF6F60ED777E51
+:1097A0000FE1FDB5CAD0AFFEF4E035E9D741BB1EED
+:1097B000DA68E7EB3BDFB2207F3EE8E4FAB3A113BF
+:1097C000F807C65907F21500C7639BE64846FDF443
+:1097D00074A0E94A74C97A1FF9CB541B3875CF14A9
+:1097E000051C446FE7A5D5566C5B1CC35819B62DF4
+:1097F0006B90DF6ACB4C5C8E98E557014DEC4F4285
+:10980000FBB78F54DD14B6C7EC8D57D8A7C6ADF69D
+:10981000B089DBA7F368D71A369BC2A8BF4CD62EF7
+:109820000BD2D78E7BAF441F07E16D99D4E771FA55
+:109830007AD9D4CC9BB0BDEC812247F84BF28A3563
+:1098400017535844E7CF3CE8E4725CA385699FA3B3
+:10985000E6621A3DFFE7CD676391915F369F9D9E5B
+:10986000CBF9EA62F3115D0F95FF6AE360A0DBB20A
+:10987000DD6653928EEF96ED16FBC9B640368EE349
+:10988000B2308177F0CF01BF5A615F3BAC819C3F22
+:10989000D427E7DE3513C721DD62CFD958831E08F0
+:1098A000607CF850B2D4038589FB27C7F52F92ED71
+:1098B0002BA97F3C3CAEE458DB0AFDB5BF27F5B5CC
+:1098C00011BEF5A6B8F132E5FCE56B26E6C5F8EA6F
+:1098D000B759D7FD2A3C189E67B457627D45EF0201
+:1098E000E643BB8CFCEAD7E9FDDF0ABFAFE662B115
+:1098F00081DE31BC9718EE9F5EE131ECCB2DAA5E84
+:1099000046FB87BF157ABE8685290EAAD99ACB2237
+:10991000BABCC4FF87E31F85E3BA01E0B8E17F1951
+:109920008E42837CC6E0186CB8FF8FC2B1FDB69240
+:109930009B0AA1CBA34AD85A8476E17E13E539D499
+:109940008C89BE95B82F70BF467E1EBA24589F5191
+:10995000A4B1635A39CA4F7B00E372B68AE77BE051
+:109960007E9BB99CEC10F9C1C50792EE463FADA8AD
+:1099700026B018AF2CAF94F61DE4BE1D13792BB999
+:10998000CF30C4C12A3570DE46B8EE263B5514AC44
+:10999000AE45674E4D1D958CF6F15153248CF385E1
+:1099A0001FE6F3B94C910E2BEADEB4C10EB477AECC
+:1099B00034AEFFD89A52B27FDB4D45572E01381E88
+:1099C000502A935F473C6714519E16EF2F85FBDBAF
+:1099D00085DD5233FC0EB453DB85DD6A16FA5DDE9D
+:1099E0004FC90CDE8DFEC44967C34DD66B500F05C1
+:1099F000DAB2C0DEFCC1D9B0C6730DDA1B5F9115B7
+:109A0000ECCB1F36D4AF417BB37DA52FC791116B33
+:109A10000FF93B586BD213F56BD05F69B12FBD07BF
+:109A2000FD1D78FE2B2BACF3994CA177C4F3A23E1D
+:109A30003D057A09F498BAB2AF1D46BD54D4A77754
+:109A4000EA49EFEC785CA5F641980FFD3E5847587F
+:109A5000C5F50ED1C8AFB7012CC9D0B60D2BA2FDEC
+:109A60001B58374B46FF7A187F2EF3EE962126CAF5
+:109A7000BB637FC4A3CDCBFB5B66303FEE3759524F
+:109A8000ED1487C83CBE2AF68F92451D85E298C129
+:109A90002EC1FBD675E54B311EB30E36EE935AE25E
+:109AA000EA2DD4F8FA0B7B94FCAFF79C22FF9EC5FD
+:109AB0003C978A63F719F397E3D57D7B4B25C2BBAF
+:109AC00034953954CC8384A2B40F196FD7AC604756
+:109AD0007D3AF9B0DA5920D17EFF8B2EEED7DA2FFE
+:109AE0006A14DF6C50C0BF413B9ACAF94CFA476612
+:109AF00087E45BA3DD95FE923983AF65D9D409D99C
+:109B0000187FABF68015FD9C838E728AEB55E6BFFD
+:109B1000B952E7EFB444A752BE4C7304C80FCFC686
+:109B20003811F33D0E3FD3FB39AD2B20B0BC82B1D1
+:109B3000272B4A26A03C3C668B5A8B91BE8F9A28D5
+:109B4000DE3B547E4F58C17CD9724672FA64857BE5
+:109B500002E6BBB769C1F43B505E8EC37C3E4E3714
+:109B6000BECFDAAC607EF7736B301DF5C143C8F72A
+:109B70003ABC3CE9E27EFD0527F73B1F3073B9682C
+:109B80000578A2008776F12ACA473DE0E2FAC95279
+:109B90003D91F23516C007E6E3925853D841EBE504
+:109BA000F9B5248FC950B7A75D1C4EEF5F709A0CB2
+:109BB00071751BACD3A7D35F3616A6FC1AE2F8A9C1
+:109BC00004FECB4141372BF8433EF24FE2F6A1FBB6
+:109BD000FB47E4AF48FAF4F9290AF8275F128F35FA
+:109BE00042BCACD7F78D5A2FE9DF468887F17E8FCC
+:109BF000C34AFEA1AC4BB00B7DD6EA09B55F877CAA
+:109C00009E9C361CF3001AEB20A4ACC3BA04D48784
+:109C10001EADB78FFF41E69B6D69DBB15F8BA8532B
+:109C200048F11BE52799B54703289F437572C31078
+:109C3000DF611A37C967BCCF5888619CA179E2EB14
+:109C400018C27DF54A546FA7B12DB8AF2CFDDE5C6C
+:109C5000512F742EE58F1528C7E0F78ECEA2BC4D8C
+:109C60002FC52D325FF375FDE46C1C03E3D1E57F56
+:109C7000AEF810E56CC6E442BC9FA2713E01575C91
+:109C80004B2AC7F06AF2E20C58FF37B238FF39D5D9
+:109C900076AAEB785ED8B1BF38E678298E027C527E
+:109CA0003D4CB2BF9BE245E1A7A97DFAF1DDD501AC
+:109CB000A3DF19D6FB792B1E7D77754B29C52BD4D5
+:109CC0007EFE9117D7603CF8804DB65FA036D8B9BC
+:109CD00028C64B6C6F920FF910DE0FA0BCB1DB4AA7
+:109CE000C8CF568B580EE263629A95F4A6BA3769CC
+:109CF0003BFAC110173F97A5CB739E4B3D5180FE99
+:109D00007082F1C286F10ABEDE78307F27D6CBC8DA
+:109D1000E713D3364755FE9E0FDF63795D7F0CC393
+:109D2000F88FBE90C4D6000A1F331BE55D5E378AEC
+:109D30003813F58DBE5ED1523D3F804C2DE53AC9BA
+:109D400093CCA23A7E9272AE5D1CC6A23A39C97615
+:109D50001512BD342D407924ED62293DBFE0E47C2D
+:109D6000D0BAC27199793207986724E98F81E7A93F
+:109D700010FA85897CA346752F522F0C24E7F1FB3E
+:109D80005AF17A515EA55E4CC1B1E1FA82CB984797
+:109D9000BF6773C75164A1CFECA17DAED158BF742A
+:109DA000320D4D789D293A1CF9F8A3FEF71B70710E
+:109DB00051CC33C0FD929D4B5E45763DEC0A7D8AC9
+:109DC0007ED02B2E919FF5803D54D1DE81BD28E5BC
+:109DD000F96B27E66343BE4D9318CAD36D948F5534
+:109DE000DD419F0BF13BB382720E12EEB52B781D55
+:109DF00099D4B3762D44F8B26A617E7584C08633F7
+:109E0000F6B1EBD24D189B691A97A35F3F7A96FC87
+:109E10000A9B1620BEB2394C3EF40B6C1017A2DE22
+:109E20005DE930F1FD168F95F2F5AD0A4488A03753
+:109E30009666147DE93EB6E5A29BEC2D40E2D1EB9F
+:109E4000ED7FFE3C4E611F8CF3680EEE37B043DCB5
+:109E50000E23123ED0E963E90FC4BF173FBEC4A76B
+:109E6000C4AF15F15A4AF630A1BFF1776137A5FEAC
+:109E7000CC96FAD675A2240A77EB95EE34F46B40B3
+:109E80008FFE1DF9A4E1EADE34938FF4AF9BFB4112
+:109E900061F13EB3EBF95AE6A9E5BA24FC4B5F5FEA
+:109EA00060D5EF97C4C31B6F67EDA5C6FA029BCFC1
+:109EB000585F20EBF6552D487C631E17B0A29CAC72
+:109EC00074943BD0CF69D17CBF0B505D8499FC6DFD
+:109ED000F0DF0DF3CBEB4320FF08C710B7C950F7F5
+:109EE00022AFA9B80F92E0BD496E8EBF870EDE4E3D
+:109EF0007A58F3F37DA178FA31D64EFC925AC21CFF
+:109F0000943F15F0A65D66DC81F8E807076DE4274D
+:109F10006B63AD11ACBB8C9F4F3507030AEADD3292
+:109F2000467EB29ACFE7578730AAD34E1B95C98693
+:109F3000EAF0D8EA9949CF97BA1C0CE9ADA69A8203
+:109F400089F845E2C9E33619F6AD3D926FBCBFA76B
+:109F5000FD151DDF4C74BBFAF38DC7CDF521C2A1F1
+:109F6000A76FABA7283B117D627A91F3D5E5F8A2E4
+:109F7000621CF03BDA79B86E8375746A6CCAEE5273
+:109F8000848B515D7BDD6C3B73805DBBC353799BE0
+:109F90001BC6ABE87A95D78B77BA2868AC13EFC7A6
+:109FA000CFFFB69BEBDBB7DD5C3FA69F083C3B1EBB
+:109FB000F0DCD995EC53E0516766623DFD03B76272
+:109FC000AC37D0BA87A3FF22FB57541BE70B0BFA21
+:109FD000DF2FDF0BDF9C89FEDC74C665A3D8AFF0F2
+:109FE000FA867D29912168575954BB05F0BA53C4AC
+:109FF0008D3B219E9C01E3BA935908D7EDCA827626
+:10A0000029BD1FD86D8F8DF76B8E3236A938B803F6
+:10A01000C79B94ED2D6B2EE4EFE3384792598BB537
+:10A020003C86F79B9380E532F17938674969ECFE0D
+:10A030001150EED8CFEDEE1EAE80FCCF3705DC68B8
+:10A04000473E7CEB7B5427BA88059EFC10E87335AD
+:10A05000DCC4F8AAE244D0827AE1537C08F87EDCC2
+:10A060001E5C8D7CB2A07DEA93FA3A17B6837F8797
+:10A0700022F1D59F1FB8FE0138C3D64C039C6C2C2F
+:10A08000C26DE5EFC5E3575EEF127C2CE909E8B934
+:10A090002A55D0730DA07E6E0AF7973B2D9C4E7DFE
+:10A0A000FCE3B2B4E23ECA592B7FCE0243B97F6FC4
+:10A0B000E5F4999B521041BFBA530BA4A07F3FB760
+:10A0C0006FBF3E40DFF5D4D902E9D720FDDEE2F1D3
+:10A0D000D7E94A7B9B02E39C3607D2516E4FBFA55E
+:10A0E0002A2BA9FE81D747CABAB3D366DFDA2BE1A0
+:10A0F000F9BC1FA98195F4D818579C6581916F62AE
+:10A100009CB54FA57DBBC287EF56AF86FEF321E01D
+:10A1100040BD34B7CA1E467FAEF3F74D7F44BB3611
+:10A12000EFF124DF2A98E7F0E6917FC5F6C7EB52FE
+:10A130007D4994AF2D52BC98475D5FE8A0FDB7E51F
+:10A140004CF8ADF74EAB1ACCD84FF15FB90F026B9C
+:10A15000FE98C9E74FAC9D08EBBCD2D569B2034C61
+:10A1600037643FB1D60AF47E6065D0837988731B6B
+:10A17000BFB516F3106E77A06BBC1FE0DBF49D69D2
+:10A18000D8EE7C4C8C175EBE16F30E2F9942850AD2
+:10A190003C9FB269FD34AA532E96E33FB53600F6D4
+:10A1A0007FEE1357FCF5048CDF90FD8B69E81F00F0
+:10A1B0007D053C0708BE05E364FB604A15F80ECE3A
+:10A1C0001466C8C79A63790DCAF7764A3F9D1D99F0
+:10A1D00086F9D879139AAA34187F53F61B6B4B87EC
+:10A1E0003136A6BDD21180F6D6EC37A7A5009F74F4
+:10A1F000B2402DE64D22D9BF9966BD1EC6CF328E24
+:10A20000EF54455E3FFCCE5A1CAFA23A5086FE4C3E
+:10A21000A9E7C3B55678DF8575AC30DF6D9B87AD98
+:10A2200043BF5EEAD17F117A14F4E61994877A6B02
+:10A23000F7514CF5162CEFB5F0FA66A13FF2385FF6
+:10A24000F7B58776F37A74D9F6F076E7AAC4FAE818
+:10A250002F1ECEF79DC9899FE76673FD23E526FD76
+:10A26000040BEC4A203FA66CFBFF48FEBCD9FF8FD5
+:10A27000F45BC665F45B86D46F029FA5467D0DD363
+:10A2800008BD7F6511EA89636E9FC15E5774CD2456
+:10A290007BF2AE47E8151F7FDF55C5EB817AF7A744
+:10A2A00050BE8B59BB4A904EF2BDD102EF550F4EB6
+:10A2B000DF84FDEABACC8CBEF3D85DF9A57E651DBE
+:10A2C000E6877571489D16A5BC401DE68747E27874
+:10A2D000BFB6A03F84E3E0771CB80F82F95D5773E7
+:10A2E00062FA4BBFAAEE62060B8FEC6F7F63E33B13
+:10A2F000E9F9E5D6151BCF98BFE83F9E45EC27C589
+:10A30000D9494B6238AB259F02BE4D3AFE5A20F820
+:10A310000DB427F9933D7B876D5F53A89F977F5FAF
+:10A3200005FAF9D9F1A82F41DFA3BF59A105A6610C
+:10A33000FF8AAE4CDAA792FC21F942D2B533B38939
+:10A34000F27EBD5B14F2A7E2E19A27E1DAAC703F3E
+:10A35000A43AA4DEAD834FCA038CDF29C61F35960D
+:10A36000E4E7C7DC9F06B9B903E517F7BD711DFE29
+:10A37000EEE133AFEE0FFFAF851F0574E4F87FC148
+:10A3800046750AF1F63286FFDCCBD0B3809E4B7F58
+:10A39000A86E40BB9946EF659F88A6F9A05F97E03D
+:10A3A000FFCE8E0FD2AE43B9D8A732C5C7D78D7AAC
+:10A3B000AB42EAE3F088372668E497C5EC878FFC68
+:10A3C00033A93FA3566BAC7F70E388692DA8BF9378
+:10A3D000B8BC3A55B036E531381ECEE67A6C6C28FA
+:10A3E000717CF303772A3D97F8DEB2BC8A7D00EBDF
+:10A3F0003B21ECFDD8EEB082745920F0D8E7CF08AD
+:10A400007D767352F773E2FB10033FCA36F83B0DBB
+:10A41000A662DD733BD7BB723E80B78561C90A5C1B
+:10A4200015B8DEE62914E370BE3CB5377B1BEA0F96
+:10A430006771A00CF58DE42FB02762BDA6BB66DA6C
+:10A4400039FFCF4C4087E785FE5CB099AFBFF33F43
+:10A45000AAA6211F74BE9D99B14AC7EFA7841F29E0
+:10A46000C795F224DF93CFF78BF15EC94E237C9C16
+:10A4700012F8433812D58BC9F770BDA4AFDBB8BE54
+:10A48000867587914EB0EEB0528EEB560C76A2CF09
+:10A490003E087CD75B00CF80C79DE6700ED631B9F1
+:10A4A000703EFBE5E517D643CF7BF7A792DE891F09
+:10A4B000FF5C368FE7B699789DD51113C833CA99DA
+:10A4C0009DC3DBB3D74BE3760B3EBABC3EFC6AF2CE
+:10A4D000B3CDC2EB62017EAA4FAC7F31779B11FEF8
+:10A4E0009502FE50337E87E7DCC4FCCD8CF0164528
+:10A4F0007CDDEBF171FD640991FFD6BB8551FC3A1F
+:10A5000004FC081FB41B83F672A53026A7251D0A7C
+:10A51000D1B16203D869C49B55E2EDF55DFA793F8C
+:10A52000CF4E357C4F5827E83F04ECFBB300EF10CB
+:10A5300018E739829BC3756A63C77598A7EBB3F7B1
+:10A540009E34C10FF170462DB91C4EAACB407FC777
+:10A55000372A06278E8FF3307B70158EDBF0CE9E68
+:10A560005CFDB8E91ECE6F4E75EE041BEAB1F5A096
+:10A5700057491D840EE17716F30F6438D6308A1BD5
+:10A580004C181FCA79E78B7C2DC865C50C585A49F1
+:10A59000DF3CA03F75FAAFC863E7FDAD5501AA7770
+:10A5A000D3B87D72B59FBE1FF73106B2ABFF2C7ECC
+:10A5B000003AD2BA7B77C3BA7C31FC7576DCBDCA6F
+:10A5C00086FAF204F3A3BE94EB1A52DD9D86753C25
+:10A5D0008D428F025E4CC807CE1FF958B34FA79F1C
+:10A5E00005FD86322E6F323E198A1B2CD0BED63323
+:10A5F0005CEA1BCA179C7AF1E567D7505CC1E9D5C4
+:10A6000058CDE92BE5F50E4FE85E0FCAC1ECFB68AB
+:10A610007F07FA55A0BEABDBC0E7817E1D8CE4B698
+:10A62000ABA01AF0F72F9ED4847473063B6CF4BE73
+:10A63000E0FF73FBAF8E201FBA6EEDADC2FBC00F03
+:10A64000044F67476A04E366F297F1FD97156EBF02
+:10A650005888F032BFDAE1D7F38984AF8FEE0CE887
+:10A660007E75ECFE906A3E6EE33E18978F43F25380
+:10A670007717A37CB3A40F801CC6FCBED43B2EFC72
+:10A680002C3E338647893FF97E03BECF78DE00E358
+:10A69000BD46D64DF9D33A359887F11ACB4EA2EF85
+:10A6A00054210E26FD73C4C6341BBCFF1A5CD1BEF8
+:10A6B0004F5297D0F742938A159273D010326F168B
+:10A6C000453FF2E6F129A41FD817F70EC6F5B85298
+:10A6D00038DFC13856318E95FC54A10F7F5300FAF4
+:10A6E0005089E9F1238A42E31CB9FEAAED549B2963
+:10A6F000D689E3A1DF7044999147FEACC86F00DEB4
+:10A7000086EBFDB318FF86055CDD05F85C1F27614D
+:10A710005CD3176785C7AFBB11E2AC31533AA226B1
+:10A72000074AC384E9DF817927419C6583F5DF8F80
+:10A730007C8CFABE30ACA6215C4360DD70EB6872A5
+:10A74000A8B4C91E9BC72DF25F6E51B78CFE3C5E4C
+:10A75000CD5E6E57D67BB9DDE81657703B12E6CB5F
+:10A76000FE533CFF773BD7E36B2A13D7376FF118C3
+:10A77000F39D378BFD2288B7B620FF40BC25EA77D2
+:10A78000F9FE12F8B584DFAA07AB69DFF4F3AE591E
+:10A79000E9FCBC072EFF0B44FDEC5DF7CFFA21F27C
+:10A7A000DD8758570F74FC48ECEF7DE808A4619DE5
+:10A7B000597D72E23AEA5F7AF83AEB051E4EAFE055
+:10A7C000E7332CC07D4DF083777BB8FD5AD47ECB28
+:10A7D00064A4FB2288E3715F53D64F483AD76C5587
+:10A7E0000DFB130B705F33EB1F8923CA06882346CA
+:10A7F00019E208396F7C3C716A85C7B08F32B7BDEA
+:10A80000589C8FC1FBCF637E827B5E5BAE611F96DF
+:10A81000B5B9BED2B906183F8413C26731DC3FB563
+:10A82000C20A02AE83E393C1547FB2C513FA9DC737
+:10A8300000470A0B1BF2C9E31CB4DF6FE3796CA07D
+:10A840007F58EF57C7C375C6F38FC66BC503E0B912
+:10A85000E47F255EAB18C7F51A6B57A89666CCC483
+:10A8600038FF59D8CB4B9E14431E607EB5B19FEA8A
+:10A87000E5F1BFEA4D31F8CD03E501F47EB3528C2A
+:10A88000FA838FD720EC56E1676F531DEB782FF7D3
+:10A8900033C6E60492BD705D27EAD8D7D9F877FEB3
+:10A8A000DBFE7EC8330FFD8D37CD5477C0F671FEC9
+:10A8B000A9FCF1B2663C37C0DEA138F4DFB57E6397
+:10A8C000B912980FF2E0167AA2CECFD753E78F5A7B
+:10A8D00006DBB1AE99C391D77150D1747A23AF869C
+:10A8E000F7F379CD86FA80C15E7E2E439157E60D4F
+:10A8F0002307A73AB17F40433B93D3A1901DCA6978
+:10A9000062F43D4ECE28EE9F7D63D436655E696C61
+:10A91000BD6DA619A50E78AFCD9DE247BDBD2A2716
+:10A9200074A517E13B198D623A67CCC92E0DE3A7D8
+:10A930000D3981AB100F729D3ED59183F627E5242A
+:10A9400087AFBD2F2FC1F536636B055CDB797CA823
+:10A95000B2638CFBBDB48FEB5E3594EC875C8F3BB0
+:10A9600053E85F370BED21FF9BB591FDB3727BEA96
+:10A970005E55427EB2A46B2C9F32AC1CF329C5EB12
+:10A98000A2DA5C78EFC5ADA684E7584C15788775D8
+:10A990004CD4AFE372F22EFB9907C85349BE4F99CE
+:10A9A0009238FE8308909E57FED8F94D92CF160B31
+:10A9B000C3FCA6C4FF869CE06C8427A7639B82B877
+:10A9C0003925EA234E25F3FCEDA935CF2AE887DDAA
+:10A9D000BB9839543630DC75CBD5C07CBD3CB758FC
+:10A9E000882E320E88C1C3E396262FD7EBAFE7043B
+:10A9F0001721BD1BF6ADA7FCDEE21DEF5BBE74FFA9
+:10AA0000E32BE24DA9E1F14DDD1C2BD55155FE584C
+:10AA100023BAD7B65868BFB26ED76EFA8E8DDDC72F
+:10AA2000FC28FF751DBB95F9306FEDAEDDCA021D28
+:10AA30001E73EB2254377E45AACC5F472DA8CFE387
+:10AA4000F91BF3FF68F78FDAB8FC9FADB487319F2D
+:10AA50007DD61CAAC37E67BD297EDC3F95787F6DBD
+:10AA6000F78D747E40EA9EA4285EDB4CDB3D56E801
+:10AA7000D776A5C58FFCB42127B40EE992A9053B72
+:10AA8000F1FD0C67AA1FF3E1BE24564E76EF2BE2D0
+:10AA9000614C1C5F8CB98FCBCB2B42BFC01FD571D3
+:10AAA0003DEDE5712E6E07A0BE3A6AE6EBD8C338DD
+:10AAB000BC666FE047C4B7C73269DE9CBAA882752E
+:10AAC0001FF1F3C6F82AB0CDEBFA3A70765850CFA2
+:10AAD000D70A7D53F9E31DCA073AB83BBC2AC19790
+:10AAE000B36B9B82F916784EFA06FA33ACB3CAD927
+:10AAF000C5F34CB5F07C814EBFC87524D033BFC0C0
+:10AB0000F5D84F761DE67A26CAF3CB02DE787A1E98
+:10AB1000F2FA68FEC96066E9BE253C14E3D0A3459D
+:10AB2000C9349E94FB78393DE4E5FE58CED61D8AA3
+:10AB3000C94E7978F2CB247CB2DFD89C09AF213C96
+:10AB400063A674111EEAB76AB49E4996E0E0253AFE
+:10AB500079F8AD909B5767FF91CEDBD9F08BB78822
+:10AB60001FEBDB151E0FB4BF6599857626FC131508
+:10AB7000F74DA671D3CE368AF3A8A675723D5CDF79
+:10AB8000B95B9B678FF169E167AFD23956F51D4913
+:10AB90000CF75381FFFE80F48BE753891FA96707E9
+:10ABA000A227E823FEFD43D822F2D7A1C299A931FA
+:10ABB0003D6D167861767EFFA258578C7F42E77014
+:10ABC000FE989EB5915C147E56FE2AD699D6FB154A
+:10ABD0003ABFC359C5F1A9876B46C27D32AE273152
+:10ABE0004FCEF32ADD053375DF93F5E97BF1FE7F68
+:10ABF00022BDB9DD88F2FBAC08EDB7843F9E7E57DD
+:10AC0000E4703F36019F693909EC99B4F3858FEF01
+:10AC1000D1F07B20C93FD390EE3AFEC9CAB1D0B87B
+:10AC200059391AC1B3B192EF5F6D34733BB671A558
+:10AC300095EA425FBB9DD7A9A57ED312C5EB11D380
+:10AC4000DC3A7C7E2487C3D1665A45DFC7815C3AF3
+:10AC5000734623FFA431AE1FB93EDCF03CD76775C5
+:10AC6000617B04CFABA90BDD3A9FEA109C363FD63F
+:10AC7000EFB2D061CBACD4FE7CE5DB73D082F04F79
+:10AC8000EBE0F227E900FA94F84BCA83C46B0C9FFF
+:10AC900011833C497A98FBFC895021F797789C52A4
+:10ACA000CA54DA17AAB1068EE2778C35623F15EFE7
+:10ACB000639DABDC4F9D2BE8F2B83D3812D7D96FBE
+:10ACC0003FF52BFAD9B5CBDFA0B8E61ECFEB7495D4
+:10ACD000720BF1A041BE2708BA0FCBE1F67D6A0ED8
+:10ACE000E79BDA511D2497B51F36913CDBA770BD59
+:10ACF000663F69D4C78C3D24D6BB8EDE9B94D2318F
+:10AD000019F721273DA138304E1E08CE45F81D18F1
+:10AD1000C64B5B0FA5DD8DF8FD02BC75DD7742DF0C
+:10AD2000CC11E743EE048413BF3759BECC1FBFDC00
+:10AD3000782C7A5CA1F342042ECFEEAABAE623DC8B
+:10AD400037D899EEC7EFF3CFECBAE5BB1F01DC674C
+:10AD5000778CF7A39FE06C0E12FFF4BA6CFEED3C0B
+:10AD60001F3A05F33D2B3B0EA5E177459F3E3BA2E5
+:10AD70001CF5F61201E767CFABCB112FAB9EF9F9AB
+:10AD80000DF8BC36A264A1FF7A76E713FF9503E3C2
+:10AD9000D4EC68C413C858F3B3BFA4B8C014D9C660
+:10ADA000EFEF4C273FF7D327D7DF80F86EEE68A68A
+:10ADB000E79F3DB98DDAAF3EF3F357FE03F31FC1B2
+:10ADC00034FA3EFAB3E70F125DEA421AD5C50FC452
+:10ADD000D71B771FE4FA12ED3CCAC11CAEC7245F33
+:10ADE0004BFEFDF499BBAED1DB0D79BF4DE441DAEA
+:10ADF00092B91D3923E4B67682BD0DAF677E66A396
+:10AE0000733B1B2CDD25181FD79572BE5891C3F5D7
+:10AE1000605DC71273839DDEA771FE0DE41DAF5701
+:10AE2000037F62FD19F4DA7189EAA89EA3FED06F50
+:10AE30002CE6496657BFCFBF2B2D6D32D7129CCF62
+:10AE4000F2E7B06AFDF38A6589F735B6E4D80DF903
+:10AE5000D19CCE19793ED20349FE213AFF37A7266D
+:10AE6000D48C7502372D0BF9F13BFA173F797B3201
+:10AE7000E6D39E19AA8C24FAAB0AB773613BCD5373
+:10AE80008FFB0E107F3C2BE4C4ED60CE6B613D93D5
+:10AE900034E6B4E395B1E366D20B4FD1F8E0E79026
+:10AEA000FFE6FBE5ECA7D0EFD9680E7947E3386DF4
+:10AEB000C23EEEE0F0C3FB0E7B398DE7B896FBEBAC
+:10AEC0004BF1BDF32BA73BD1BF8771BBCCBA780C3C
+:10AED00038B200ED238E370AF134253C87EC94CF4D
+:10AEE00042EB93E781C2FA297F2AE5333E4F83FA8A
+:10AEF00009F3ADAFE7541ECE71C5AEEE01F21CD61C
+:10AF00005CFE7C4A6E80AE5FF57CD15767F7703B84
+:10AF1000FFD2FBC4B70DC8B7387FE843839D97F5D0
+:10AF2000111BF7BF4F7C3B7F1FD7C70DFB2A2D1886
+:10AF30006F9D5911601F80A3DB20F86FA3D2BD90D5
+:10AF4000BE4FDB6FA3EF0E7B247FB6BFFF31EA9FBE
+:10AF5000A27D5EAAE7E9D9CFF9F488C944798023B4
+:10AF6000DBAFDAD6ACF4B7ABE06F939C343431E1AD
+:10AF70006F2F7B1BFDB3FA1A5E07DF10C747858F63
+:10AF80009F6A457EC900EF18EB32C09F994CDF6D78
+:10AF9000D6B1D128A7391303FB7369FF9BC7E739E3
+:10AFA00035A04FA07D9373B11F4B073226825F8C73
+:10AFB000FCE7BCDE8FF9A68DF91DADE83F87273190
+:10AFC0003A7775A3B97D02C6C11B27F91C8049C019
+:10AFD000DB0EF2AFD9508BB067F3C92F6FF0FCAB2B
+:10AFE0009FF2C1F1F2BF7F25F9770DBE643F9E83CA
+:10AFF0003B6D9FB294FB337686F037007EB13D2DDA
+:10B00000725D04E13927F027F1D863EEA2F3787B73
+:10B010005E48A2F30DA74DE4FC9A31B183F4C76BEF
+:10B02000FB6F247B2DF932756F12D9ED4CCDA1F851
+:10B03000295F744B12C2334FC0D32EEA8433841D70
+:10B04000295EC7FDB8CC5C2E4F99B92671B518EBB7
+:10B05000AC1C61CA3B9C13F42736D19DFB543F3F87
+:10B060004AF254B78B8FE74C0A94DDABE35FE95F9C
+:10B07000C97A03AC1B989180BFC7E6723B58F8F8B9
+:10B0800052A2FBBC1A713EC43AEE5730E00BC41B0F
+:10B09000D091F8E026E722A2DBBC75CA37898EE1A1
+:10B0A0000ACA1B4AFF2C7EFC71627D3B6DC1515860
+:10B0B00067D8EB4AF5E37ED7CE8C8089F2EE65192E
+:10B0C00094077165717FD125FCC598DC07479960AD
+:10B0D0009E4FDCA99CDE91DF6898179E92EB4BE8AF
+:10B0E000E7F58FF3F978D3DBC3C331EE91F5611245
+:10B0F0001F9195C973F4FA7482A04B64189B837AEC
+:10B1000003E2093BE5AF1D300FE613B65FF724CF2E
+:10B1100027F073A1AFCAE5DF354FCA0A8EA2FDBF83
+:10B12000E2E0326E3FF93AE3F1F1BAB09BAFCEBE46
+:10B13000B30CE3D8865BED7E94BB0D2F297389AFEA
+:10B14000C3563C3C08F89ECB21384C540FC5421ADC
+:10B15000D1A3A1291849CCF73348CE1AC0EFC33880
+:10B16000601AF2B993F83EC2F99EDB3F996F403DF9
+:10B17000A9F7B7A53E907A06ED1BF2B3948B861B18
+:10B18000BA4B90BE5F55AFF498B99CF7001E508E35
+:10B19000A4DCA4BEC8E565CD4A5F253E5F0372AF5F
+:10B1A000A7777C7C867062BC22F5FBAA9CE0B77313
+:10B1B000114E53B495BE7D15FAB8E1C5D52589BEAB
+:10B1C0005F92FAD82ACED3B4465222FA7D06DCB377
+:10B1D0004F2DA76B18ED51CAF2C4F998D5B9D2BE5C
+:10B1E000F6AB775A9DEBEA5FEFE446DB85F2B33DC1
+:10B1F00085BEA393F9A9F871BF2FF84DD245C62992
+:10B20000B85F80FD9F12F2B359C8E973E2AA8B7F41
+:10B2100088FF7DA6D0FBB8DF3F901D93EFFDB3F212
+:10B2200065721E694FE3E92FF73B703D334A07EE25
+:10B23000D77E50C48171FCF882F0A7EECD65746DA5
+:10B2400037473F27B95A92CA689F6D330B64E17E36
+:10B25000D92B57707908F496E0F857E68732F24612
+:10B26000C7F2C2781FE3935A8D85719FAC76A739D8
+:10B27000A2FF8E67277E4809FDCFA75AC32AF0F99F
+:10B28000B8FCD061A4677802FF5E2FFC3D1BEDFF88
+:10B2900080233D1AF54B23EB4E433C37A85D2598A0
+:10B2A000C7DCE20EBD8EFD4F99BA0A78BD05DF9F5F
+:10B2B0003A29F2BE2745DEB7D312CDFF8E3376CEC4
+:10B2C000DD05C6EB752E749932310E7C6FDF3B3F86
+:10B2D0007B09DEBEE3A573777C1FB1B526E5CE1FE3
+:10B2E000C1B5DAAA06F5E7FF9C4C4DAC674F093EA5
+:10B2F000EAABA759999430EFBF278FF34163DCFE87
+:10B30000EF9E3C1FBFDFF75D16DFFF7D6F8073B2DE
+:10B3100026E771FA748A3A9FF8E7D3C43C3BCDAC78
+:10B320006433C2B32D95F6D799C6CF37AB79A4D085
+:10B330008FFB929D45FCFCFCDE4715B20327CD5CDC
+:10B34000FFC0DFADD68A981D453705FDC41A4738C2
+:10B350006A02FD51B32C358AE767C27D6D1CCA5A5B
+:10B36000D841F5A673857D9CD7F4DADF30EF51A381
+:10B3700031EB3878EFB47D7E1A9A8785DFBA178F64
+:10B38000C061D9D5EDA22E519CD71698AE5E4AF970
+:10B3900032BFCEF85DCBDEBCA015F9AC3A9DE3BB65
+:10B3A000FA5E7E4EAFECFF9290DB7EFC86BC0AF02C
+:10B3B000FE51E1F6257E1E77FE84E751BF2DF7048E
+:10B3C000B368FC7BCF19F45A8FD2FDF48F902F977E
+:10B3D000A48A73D45881BE5ECA9FC7ED4B2DEE3749
+:10B3E000816A3C5FD655B2BC10F9BFB7E077987759
+:10B3F0003B904475B1B5B8EFA4AB671B68DF69E05B
+:10B40000FD269F05F9BCE1A2427C32F7C06B2750B4
+:10B41000AF3768DDC43F73AD76A24FC3458D9EB391
+:10B4200036F359FD777AED9EC0705C5FF8C17119F3
+:10B43000B46F950DF709CF43E99C8FA5A21ED99D46
+:10B440001F1A8DFD36A5A4DD85F1E1052B3F97A9D7
+:10B45000D1C2EB8E99F8FE59F209CB4B35F2C1817E
+:10B46000D7FF8670CDB786E81CCB05739AE8DCDC85
+:10B47000EAF4E86847A99EFEE3BED6B9B95EA137F3
+:10B48000DEB3F0FA9CFEFCCFE9B0278FEBAFF7728A
+:10B49000B81CBD57C06AF6E0F54AB8C27BEF158903
+:10B4A00076396FC78FD328E4E8BDE1DC7E8597A6A7
+:10B4B000243C97E46E218F7BF302B723BEE4FDA703
+:10B4C000051CEEFC40759E8BF46348F06D3403C69A
+:10B4D000ABFE25FF1D03D6D24B75257DEB2A11F05F
+:10B4E000BA13C3D5121B77118E07FD02E4C7BF62E2
+:10B4F000A3EFEFD874D0D7A89F97E633D4CF306F9F
+:10B50000631E1F379A41FD92681DAC0DF436F0EFB3
+:10B51000F9D13EA2CB9A4AE0D351E25C7E5F8CAF78
+:10B52000243FC5F3D17D79CA40FBE2F7E17CF1FB12
+:10B53000E28C0D267A13BF7D8DEFD8466471BC80F6
+:10B54000DCB7E691FD8D5EAD973B8967A92FDF4B98
+:10B5500036F245AA80F307A25F1F9EC5395ACE6214
+:10B560006E0765BCF0B8E89F21E82FAFD2AEC5EFFB
+:10B570000F64887133F2D2245D1E13F4CE4848EF75
+:10B58000AD9CDED0EF09EC579DD47B6716D8B3DBBA
+:10B59000C04FC2732FE13D2FDEEF97B798C8ED7013
+:10B5A000E3D254867EC24FF244DE6F542FDFBF1BBE
+:10B5B000DA4BFA682E03BDA35C9E7E9823F0823E90
+:10B5C0007C43D40F2958CF93496AC087E301BE3B1F
+:10B5D000F35C317CC7CF77121F815FF84A9EF8BEBB
+:10B5E000AF8C9521BDEE7CEBCFA977F8F01C74FEF3
+:10B5F0005DF147F6D0AB38CED9EFBE4E71C0494BA6
+:10B60000B4A4DD9EE0B925FAF82625F6FCAE9FA885
+:10B6100061FCDD8BCEAEB38FCE06BE9CDBA5FA718E
+:10B62000CAB9F77DFEE618F4AFBBCCB40F05FEC572
+:10B630003A3C179435717FF4A4C948FF33DF36D6FE
+:10B6400075740B7995DF3B4B7D25FD86C5CCCFF519
+:10B6500054323F87FDD49245F4BDF37C163C8AE713
+:10B66000B07FBA742AF9D38B58887E8F605E9BF1C5
+:10B670003CDEF8737CE3CFEFC5043FE22FFE1CDF16
+:10B68000BE7C7B55623F23359FF3E1198BA82F18B1
+:10B69000C0CFB828F857D61734CAFA8297BFBCBEB5
+:10B6A000A031AEBE20E68FC8FA822F284F68CEF7B1
+:10B6B000D1F8389EBECEE0CC84C4702BF9D2EF49CD
+:10B6C000318C2FC789CD9346CF1BF13C9F84DFABD4
+:10B6D000DBE9FE998589E749CFE7EB6E8CAB67889C
+:10B6E000BDCFEB18649C2FF9A2F1A297ECB16CF7D7
+:10B6F000FD0E43DF7B79F43CFEFB7C99A79772F04B
+:10B7000081C2AC5ECA9BAD177AD13F1CFDDF0FD062
+:10B71000AF4239BCD1F74A378038EFFBD794684540
+:10B720003139895F07F0D367FAEFE087E48B7379EB
+:10B73000FDCC4FDF490A3EBFF3BB93D2719FF5DFCB
+:10B74000EFAB327CFFD6F77DBC45FA7376835D663E
+:10B7500071767BDEBED7C95F9B6F0DD277781FBD38
+:10B76000FC5DB2D70B59D08DFC7DFEE52B0A42FF64
+:10B77000037B2DE1B9257CB799FBE94EF233660ACC
+:10B78000786E39C0FD45933560A67902CCE77053D9
+:10B7900028CEE105A589E7F05DDF077F299DDF3130
+:10B7A0004EC0AFE0FB80DFEBC595CD0D79106E7913
+:10B7B000AE00709307AFCDD7F87D781DAF0435A6E6
+:10B7C000FBDE74326BCAC3FE266BB72ACE3BA3F3F3
+:10B7D000E39362F8A276AA68B7DC7AE1CE0578DF57
+:10B7E000CECF27B6083816E68BEFA8ADCC8AEB4E45
+:10B7F000B2473FA57D40710D4FE0FE77B888D7ED89
+:10B8000026E3790A30AFDD7E2E8C8B7530079D13D1
+:10B8100060735C88621CA2FB1D897BF25DBADF91BC
+:10B8200060519E9F1AE879DCEF4C640AF89A857E95
+:10B83000F3E27987C574AE03E9B7875317D239E4C9
+:10B840002EFB32DA9FDE923685F62FDD8878AC53F8
+:10B850009FA23B97019EBB82C6F318B2E718DBDEBE
+:10B8600090B16D6527A93E4A89063D97B262E74EC1
+:10B870009A85BEB83599C3756B328FD756E71BBF13
+:10B88000130DCADF7FC9E4E736F4B8AD56ACB7C0D4
+:10B89000F83F9FC7FF7F044A435CC87F1FA66C7CAC
+:10B8A00060C8A3A3F0774F54FF2AA0536BAA6FA5DB
+:10B8B00086FEDBEDE277C2B40EAA63D8766706D5C2
+:10B8C00089B6DA1C9598F70CE7F37C4FA3A8F70725
+:10B8D0008AD4EE82F7B6CDCCA57ECEAA5ECA97F604
+:10B8E000AE66E41FF5E3D32F80FF01DF4F621BCF6D
+:10B8F0009398EFEFC2EF88BD0195EA74E5F31DF868
+:10B900001CE054045FE0FDF115B1DF712A3E507672
+:10B9100008CFC36421C5CFD38F3EE2F759C22F6F42
+:10B920003C5079F36880ABB86B24B1F1E00362BF9F
+:10B93000C59924F68DF9F9BDF1FD07637F68A71C51
+:10B94000F3FD6B1D3E32419C8DEF4D48A1751F17D5
+:10B95000F92626F4C39838F9BB2E260FF4BC4CB454
+:10B960001B457D1D9E6111A8E0E90CEAE7E4F2E1C8
+:10B9700067F28FCBEDB52CF687E354C5C6253D3570
+:10B9800031F6382687B0C472ABBFB90EFA1D99C123
+:10B99000F7D7C768D18328EFD7896B99B8B2B9EDCB
+:10B9A00084DF352B032AA3128890BA1EDA63AD5DBB
+:10B9B00059C8DFE3ACDD2B5D30CE3573EEF660BBEE
+:10B9C000A4A098F80DFC2F3A7728C36E8AF0EF28D0
+:10B9D000CBFC2847B3E7F07CECAC3956AA3B9EA5DC
+:10B9E000F1F3A198162ABC0D9EDF56CDF3C0D8AE58
+:10B9F000D6E559E4BEC7718853762788374B0AB815
+:10BA00005D94EF378AFA1FF9BC080F8AC63C59C10A
+:10BA1000E48FF2C99EF0FDDD3352CF0C6543E37E27
+:10BA20006FE67C3EEE5F56BE31909E303E177A62E6
+:10BA300056E01133F9E9425F48BD1C14754D5DE2D3
+:10BA40005C97772770BCBF5DB998F4C5ADAC89F43D
+:10BA5000F96D2C6C467CF7E9FF293ABF06E699158B
+:10BA600034FA39B3E7C4FB3D9C5FE5BCB7878CCFA4
+:10BA7000674AFF758AD17FADFECE17196417B39F51
+:10BA8000AEBF342856BFD41857BFD420EA971AF750
+:10BA90002D39E2D2D52F351EE0F54B0DFB2E57BFC9
+:10BAA000D44BFB48C7CD9183B8BF727C318804C0AA
+:10BAB0007948D4BB1CC67A97F2185FA6CEE47956B3
+:10BAC000605FDA2FC973A4F8D15F6F3395535EB608
+:10BAD0002D2DD5AFCF83AE59199AA4CFC7CA7AA559
+:10BAE000E303C4B7C30BB8FFBA51E179F1F0ED56E7
+:10BAF0008AE75CC541C33E844B652730BFF811FA25
+:10BB000059A3A93FE53D701F6F245C230AAFB3EF33
+:10BB10007B1FBF3BC27C649C3E7265F9691FC09568
+:10BB20007E35E5F3E71C28DB41FAC66EF3E3EF222E
+:10BB3000CAF1E784B6695847D478609B36DF1EE3C4
+:10BB4000BBCA02C1AF292C05F9B52FBFB72789F2AF
+:10BB50007B1FD983930AE0FD3A4B743833F233DD0F
+:10BB60001FC8AE2D12FC629E10BC7D01C073FE4D3D
+:10BB70000BCF73DDC7485E9FDF9F41F9496D2623D8
+:10BB8000FBD252C9F8EFC06CE3DF0B9CCEE0E718A4
+:10BB9000B5CC6064077B322713FD16B3C8513CA7B0
+:10BBA000A866ABD9701ED13D3B8CED3AD641F6A6C6
+:10BBB0006E573F7E26BD25F5633DF3A966DC07E899
+:10BBC00034BECF061BF56399B00723674D6CC67A68
+:10BBD0008D91A6A04AF6F73E7FEE4C8A9FABB91D29
+:10BBE000654FD3F957E7533F51B99C737D3C3AA653
+:10BBF000350D7669B4F0AF6ED0F8EF2A487F69B49E
+:10BC0000F89D85C3A6032AFD768F806794784FFA46
+:10BC100069525FF7D1732CE852E0FB07255D8B5822
+:10BC200011D215C627795030C0C9A4F1E9F71AAE70
+:10BC300013F301DDF9F977266B04F9A85569223D64
+:10BC40006D65425F2BA1667CF917E130E9ED6B5819
+:10BC5000D32DF87B9FE3AC5D29E497DA436B0B5C53
+:10BC6000313E6966D182DD8A815FE8F9D98C37126D
+:10BC7000F28BB42BD177B9BF318D811F08F3067ECB
+:10BC8000CFFDA0C30A8FF3C01F3C8C71DE1BA6A999
+:10BC9000C40F536119D86F92C348E71B3DC6F654D1
+:10BCA0005F3F3E50F5BF5F0112A7213CD3861AFBD0
+:10BCB00005A47E6346FD56C8BEE075E5AB8F7E0BDE
+:10BCC000E3FF94E56C28FA31E039FA13FD1EE973BD
+:10BCD0000503EE933C5790609FE4BCC8F75ECBBA77
+:10BCE00017EE52FAF34DCF91E5AA47C75F929F5FD7
+:10BCF000147515CA2FC57EEC289EF78BD979CE37DF
+:10BD000015A2752DF25D267E7F22F845FCBEC8F592
+:10BD1000FB6C51FCFD9C3231CEB5C83FE531BB1EFA
+:10BD200035D97D9622E4137F9BAAF6F7E7DD993E8D
+:10BD3000E297912669E7FD598CEC7C47B386F0EFDA
+:10BD40001F931BB21BF8E31DAE4F803F282FD5CFAA
+:10BD50003E1A9FC7F18FA4E331E147DFC87C144747
+:10BD60004C117E74B490F34F95FD560DDF7FAD8876
+:10BD7000E70926E206227DEF69B48B5556231FC4DE
+:10BD8000F317CC68D2CF1BCF6F03F1CD20E41B6932
+:10BD900017B32ECF379F0B3F2301DF7C5E307A60D5
+:10BDA000BE89E717A95776DB1C5578A670638D42CC
+:10BDB000FA78E49B839BB17D457D21D5BDECCEF027
+:10BDC0001FA2E74DFCF9A8AE808A7531C5CBC4F33C
+:10BDD000C26015B61B97F37D89D1C779DDCCE0FB36
+:10BDE000F8F3B2554D87F0BBB8C6307FFFC54F5B47
+:10BDF000E97BA148AB78BFB2BD0ADB8D6DFCFDD3FA
+:10BE0000B8BF3402EBDD22CD787FD8BA423F0F4B6A
+:10BE1000B95F3B5EF0E96E65CF217AAF9DBFB7E8B1
+:10BE2000A835997E6750F8AD3788758EDFCAD7E997
+:10BE3000FCE026FADDD105BD61F29F3E36D5559076
+:10BE4000DE1920FEAC54DAF3F07A23EA1315E90781
+:10BE50007C5DC4F71FB7C314658378FE42EEDB61D7
+:10BE60001D81BE6EA06C10B7FBB29F3B937FD7C500
+:10BE70001E4BA5BCAFDC578C6E620ACA19AE51F8D6
+:10BE80000109F7196F2C6EA2FDC51B07C9FDC56E10
+:10BE90000DCF752FBBF4E7C989F22B63C5BC9F8812
+:10BEA000BA0879BF265248BF23B61B9984BEC77E05
+:10BEB000F237D416E79433F11DD8EE42DE9E3CE80B
+:10BEC000891FB6E5017E4D4D1A9EEBC60A14FA0E87
+:10BED000EE5FBA58343DAD3FFC376A2C6AE1DFB102
+:10BEE00011FC0B9B2DDBF9F7885C2FCD926A67DC88
+:10BEF0001092D35B059D6E1924F29223D948D43752
+:10BF0000B304DD6EB382DF4A7AADDD1C27FFB307D1
+:10BF1000A1FDD832A0FF6C7C1EA71F6AC4BC0B8594
+:10BF2000DFBC187FAF54C5F3E6B9FFFCC916EE3786
+:10BF3000DFC33A288F78FE31EE2FD6C3F2905FFA36
+:10BF4000FDAED74E63BBBE23FE7764F9EF10F6FB60
+:10BF50009DD6529E9F3DBFA5BE02F373359BDFA4C5
+:10BF60003C708DD41711A3BE000783EB8B4D575245
+:10BF70005EC764E5BFA33912F405D6978CC4BA51E5
+:10BF8000187FB838876735BEC2CFDFF9EE20B237E9
+:10BF900053A8AE94C653693FF7CD802F461F69372B
+:10BFA000E2F54599CCD70CCEA47C96D41F658CDBEA
+:10BFB0008B78FFE811494F11F7483FA30CFD0CE0C7
+:10BFC0008F2E933D6232E9FD8A08C921C48DD36C5E
+:10BFD00045C83ADC9F1A79FB28ABA03F8BA3EF261C
+:10BFE000A2EFC0F193F1791CFD65FC5221E87F3B83
+:10BFF0000B505CB457D0FFED77F9EFBDCDB22F23D6
+:10C00000FE7BF7F7DCDF94F1D3D78F9B02EA3F1278
+:10C0100037F5D1DB067E640AFE1EC6D4218FE27E90
+:10C0200078A78DFFAEB5C2E9EBBEFD78813EAFF8D3
+:10C0300036FE7E8BEE77259AA72659711FB0D9CC94
+:10C04000E38A99D3DEAB98ABD31B8559952F0D1A94
+:10C050008DF4E8FAF61F30CE785D9CE37AC045F4A3
+:10C06000BED0C5EF5FD87A953F0CB7CF98C579465B
+:10C070004AD3422C8192702C14BFF7F259CA2BB4C8
+:10C080007F3C2323740CE970CF1B7B295F59C7BA0F
+:10C09000F8EF028B7107CE4B86497F595EE5F6B00B
+:10C0A0005749F6F3EF86C325FAFDA4633EAE67C792
+:10C0B000E5078FE33CD2DEC5D7159C5C72237DD7A4
+:10C0C000F9171648C7FD4C45E3BFDF1C3F2FD611BB
+:10C0D000B4E8F2D9276D89BF333D3588E7038A106C
+:10C0E000475807911BF800F1F78988033F11FB5A65
+:10C0F0009FA4F17DAE9EBEFEFCAAF9847E16FB6075
+:10C100009F641AE347D9CF22AE1FAEB0065B74F42A
+:10C11000F46D4A6A8A501D95A81B59C678BCB43F75
+:10C12000C3700E4186AFB2C887FB14C5010BFEBEBB
+:10C1300077EF7E6E8771FF19F7872339A12F10EEF5
+:10C14000061F0BE0FE2AF3755B6EC17D46F17DEBA9
+:10C1500079C12FE76DFC2AE1FA6FC3AFB72E0080DB
+:10C16000000000001F8B080000000000000BD57DC0
+:10C17000097854D5D9F0B9732733133213261B84A9
+:10C180002D4E16B2906DB261D8270920B860C25208
+:10C1900051B661DFB209D88FB6F6CF601090475B19
+:10C1A000A8B6C5CFE51910A8562C1183460D1A94D0
+:10C1B00022585B4704454B75A4CA222189602DF69D
+:10C1C000A3E57FDFF79C93997B3361FBD5E7FFC83D
+:10C1D000F37072EE3DF72CEF79F7F3BE27518E8A9C
+:10C1E00024471C63ED77FB4D4C652C4AD62BA09E53
+:10C1F0008CF5F2244711D4A7C8F7A2FE10AFC33FB5
+:10C2000003EBC5D81CFCCD01A5C5DAA2E6C0EFEB57
+:10C21000C25AFDE9F49E5D4A624C51998745432517
+:10C220009D39CA6DF874B8FD442614E1F01EFAA9D0
+:10C230003159D729B9D4BCDC02FDCD10FDB1FE3691
+:10C2400023F63F9D77C566341FFC5689646CA6852E
+:10C25000ADE907EF6735F736C10CD8A2484FAA3DC4
+:10C260000B5B8CB69F8071154F847A2902FAC67FCA
+:10C27000A3BA968C19D909393F5A8787315CF700E0
+:10C280001FAD6B7D4947C27F1732D6B1C76CDF0245
+:10C29000E35435BF7554817555C9F5356AD797EBA9
+:10C2A00050E87BC62CDECF2D8CDDCE14D613FA6978
+:10C2B000B2BA73115E55163FCD137A349567C368D1
+:10C2C0006B8747D1FA7BC3F7309F17EB5CECEF61CC
+:10C2D00001782EB3F3F58F512BCB4CB18C9D9BC7BE
+:10C2E000EC6678B4ECE0DC7A0BD4973DC0EC7C745F
+:10C2F00097810D86FE05BCBA9B5F5CB981392CA283
+:10C300008EC34EEDC11CE9817A1F77B4A60EFD32B3
+:10C310009CC752D16FBF457D35DF0FA84DD2B4BF4A
+:10C3200061E520CDFB444FBEA69EBC6EA8A6FDC015
+:10C330000DA59A7ADAA69B35EDF358524F06F0AF69
+:10C3400039A0322F8036C33B51F33EF3E9BB34DFD3
+:10C350009F64B5BF190EED1AC3237318E0517D78A1
+:10C36000E4162C99C7E5CB02F8CC13EBC86E98A362
+:10C37000E9E74CE4D803B8AFF37C0B6E658057B99E
+:10C380004D4B34FD2E552BF9BE6D083BEE87EF6A01
+:10C39000E107E199CF3AF6F783F9557B15670BBCB6
+:10C3A0005EB889BF97DF2D6EDA4CDF2DF66A9F2FBE
+:10C3B0007D5A5BF794B2F45A2B63CB1DB658C287F3
+:10C3C000BEACEFA520BA0AE0013482F1CE3DAE7AD0
+:10C3D000CD89089FD4DF0E27F88431AFA3EB7E9D73
+:10C3E00063CCD982ED77D89C1EA82F3C3897E663A2
+:10C3F0008ED7E241B8438B0711E95A3CB039B5FBFF
+:10C40000DEB358BBEF7AF846B9065D16BE31E3B429
+:10C410007821E15A0C3FDF255C9FD0C1B3609FAB10
+:10C42000DE4A7062932D83117E7CBE6656AE229FDB
+:10C4300063B1C067E0B99377C1CEDAAD1E03E0CF38
+:10C44000730EC578C212E827CFD8B217D7B346F11A
+:10C4500030FC2E9C79E3915FD417B724B4C0BEE4BE
+:10C460005B6A71E7D817D6F2E791EE2B4D2D39F8BC
+:10C470005EF6F785D54DCF5B95771630582F33B6DE
+:10C48000E4103FB4301A5FC271700F8EC74B593938
+:10C49000F1E117053E7FFED12282E30256BBDF05A4
+:10C4A000E39DF998C37731F350BBF91BB470E802F0
+:10C4B0003F1DDC006D1C386E8D58F712C6BC86E43B
+:10C4C000AEF0549A95165B0E82A159F26DF7A50253
+:10C4D0008E7608CFA1ACF31FF16F095F68A004F35B
+:10C4E000271CCFDE2B309E84A7E45B721C33AB5538
+:10C4F000E3910E747C8CA56BF709368E617DB0A834
+:10C50000BD023CD4122D06EB85FDE0E419BB518C35
+:10C51000C3E6B8E3114E16B681F66FBDE25CA7C262
+:10C5200038EA0D89F50CE0596077A9B85F45CC373A
+:10C530000D9F175B1AEA8DD0D50DECA2FD04C81330
+:10C54000D67B7BD5A598C03A14B92E8FC28C501FCC
+:10C5500021EA933C8AFFB1445CCF5BDFE2B823441D
+:10C5600039094BD83F58E6DFFF0A1F0F571C0370ED
+:10C57000BC89AFA4C521DEAC516A996E7E475F8548
+:10C580007E5443470CB61BC3DC462E77BD3849F6B4
+:10C5900096E2A779FF88B9EEC752CAB76AD6307655
+:10C5A0001AD4AB1B416E456219DEA242C99A74F0DF
+:10C5B00064C6E35837C04A10BF97625DEE7B62E005
+:10C5C0003DD5D5AEF555B0863ED15796EF1B13ED50
+:10C5D000345F907FA9FC3DE76F8B04BC1649B9E539
+:10C5E000D5CEEF18FED287B13F9A0026F9484716FC
+:10C5F0008FA127A805894097D82E87E560FF40576F
+:10C600008E44E8BF5734D0A1124C77BCBD7CDF8587
+:10C61000EE74EB67B5B0B94300DEB642931B58EE3B
+:10C62000DCE0F55E053CA41E310FDB42F92F878369
+:10C63000D65DD5E3D8072E7C5DE84B40F92FF7A9EE
+:10C64000C6C4DC0DA8B734C4D1B8F2F9E84483D02D
+:10C6500027001FAF024EDDEF430AE943721FAE56BB
+:10C660001FCA451C2F0AC0EFE6AEF09E90181704B3
+:10C670004F06F0CCD6C05BFB5EC05BC2E36C916F33
+:10C680003BEE936A3BDC0BE1BC32BE7C12EECF800A
+:10C69000A3FE138A2130AF316AEBF6C7508E35A95D
+:10C6A0004EA4E5EA119CCF55BFAC12E9B7359BBD4E
+:10C6B0000AF4B3A8E94DD2CF5AEB809186750FA743
+:10C6C000CEF5EAE0DD151E7C1FE57A96EAD63FF34B
+:10C6D000BDF3B6190E5A67CD15E050130A0E677EEA
+:10C6E000CC669567E1FAB27AFAB302E366E1BE037B
+:10C6F0001C7E1E597E0FC2A3F0FDFE91089F316A79
+:10C70000F3FEBE0887158AD30CE38E32334F38EC24
+:10C71000739F9565ECEFB057C5FE5AA71DE011DF7A
+:10C72000DFEA54011E69F7A8E55EE8F76F2B96472C
+:10C73000CF85F2CB3A187A203C570CE5846F6CD742
+:10C74000273F85FED26CD39DEBA136C30CF38171DC
+:10C75000127F1CD1920C7CE27513B320BD8525D5C8
+:10C760001E1A0FFD7644A94ED4836355361AF14B39
+:10C77000C2393682AF433E2F7962ABE2B7069E8F55
+:10C78000AAEF285806654522DF77B9CE51651D0509
+:10C79000A8F74838C726F3F6CCD8913031883E72D6
+:10C7A000053C8EA15E07F0AC8E33AD4139D866E111
+:10C7B00075E64A27FD778585D3C7B1F0042FCAC730
+:10C7C00063B0561FF5D76263D620BE18EEEA792310
+:10C7D000AC9BBDA7B26D507C6D77F58C2278D87973
+:10C7E0003F42DF6A636C1CC269C5F8D2DED150C615
+:10C7F000D573F8E8F1A43191EBFD951780F00A02AA
+:10C80000CF2B8D2D26BB159F9B34CF8F03DC3CE6B1
+:10C81000407DCEA994B18CF88C730DB69FBB2E824F
+:10C820007982F4AB46318FEEE0521D656446804755
+:10C83000B5C2CA2FD7EED5FFA8045FFDFCFF2AF8CA
+:10C840004C5C59E8F51D12EB2B5B7BEB6F51FFAC99
+:10C85000F68531333C5AF172496F16A2BF4E385FEC
+:10C8600018C6BC314175A39FE0517D61243D2F5B0B
+:10C87000DB6A42BCC77E1CF07C45B8ABB7F33270B4
+:10C88000CEC579E07A2F44314F4CF0738E5781FE3C
+:10C8900063E9FDEF118080B79E26D5BB0D3EFDFDFF
+:10C8A00001C3B82DA1E62BD63F28CE48F492D9C2B9
+:10C8B0005C9B438C2FDBF58A067E6DE570AEC8EE7F
+:10C8C0003ABFC652FF4C9CFF8DA3992BD478E74406
+:10C8D0003B39EFC668FF0281F7A915B6A0BA5DBB68
+:10C8E0008F3DC5F88D37FB13B0FFB6F16C6A4388F6
+:10C8F000FEE57ECF88776722DFA9BC031A037E0C92
+:10C9000036D62AF6207AEB6EBF037006BBABE07218
+:10C910007036D17BD9DFE943821E99CBAA001DCDA9
+:10C9200016F26AF6D6A5B702CFECB45F4E6F02FBE3
+:10C93000058638CD6ADFB4617D8342F6C91C37C8ED
+:10C9400000E0370BB615AC41B1353B9EB191D1FC3F
+:10C95000F9BD58AE0E0BC859FADFC582E5A21C7F9F
+:10C96000DE835ABD75117BF02BD47B4E1FE27C0118
+:10C97000D453B2BF173CA2ED6FD1D65B4EE23C1749
+:10C98000E9F49F3454F040FF484B12F6C460361867
+:10C99000F9FFB26DE74D918EEEF1FF4BA0F394815C
+:10C9A000C827ED540E4D72E524A17FE13D3ECFF145
+:10C9B00049EEFC24F4A3BCC7E775AEF21C970F8FB9
+:10C9C000C7925C322313875FCDD32CDE7A98C75A87
+:10C9D0006023E1001FB399EB4152FF53D5E56A2470
+:10C9E000BC1FF2C58A6837F2E1676F1A87FDC53D43
+:10C9F0001BE1C2F5AC2F71E5A1BF607D85D5590F54
+:10CA00005D5AE07B941BDEDF0F79A32F6A070D1BB5
+:10CA10004BFB21BA35EF6D417FCA3AC357FBFB414F
+:10CA2000FB752399B39E05C6A969AE781EE79330BE
+:10CA300099CB97F589AE3C7B50BF4CE873D5027615
+:10CA4000ED7BD27E390CF6F7B103A44EC3FAC09E3B
+:10CA500087F90D627C9FD9458013E0098E1DACB724
+:10CA6000B6829C626981FAA006A5250CD653D5F83A
+:10CA7000BC01E560E57D2DBDA6A13C7AC6E8DC12CF
+:10CA800034BFD8D7FB943A220372689A62273D419B
+:10CA9000EAE57732F92F8BF066AAC09B3B853E3ED4
+:10CAA0002D82C3770E7326E077775958A401486921
+:10CAB0005A594311C9A9A5615128FF712DA1F65BEF
+:10CAC00096DDF995AAB7DB3C0AEC7B9BD2918A9D57
+:10CAD0007C89BE1EEE5FF26E49ECDA4F5D92A0C318
+:10CAE00054A11FA630970DD65DFD5ADAE6F5F0CABF
+:10CAF000DC03F6319FF891A5389FF4630BDA3D8B88
+:10CB00005F0D6F512203706176579E01BEAB99D8BD
+:10CB10003F7F3DEAA44781AF0081B585F913888E38
+:10CB200081DF2820F336258DAD3002DE55F705FD77
+:10CB30000BEAFBB74CAA3002DE5727F91718A0DE24
+:10CB40009654C5EB83FC27B07E216925AFE7FB1720
+:10CB5000A8508F495EC3EB6808026239921FAAF0A1
+:10CB600040FF5F4609B9EEF4CF44FCA97E25CDB065
+:10CB70003E68BDD664CEAFBE0CE7EDBE4C64B326B6
+:10CB800022BCD3FDA9384FD9AE2349EAC31BA8BDA7
+:10CB90005CA7FC8EC587EEFF7749BCFFC565421FC9
+:10CBA0008960EB106EB04D9E4880FFBEE6B42DD874
+:10CBB000FEC1A468DEBF1DFA290CF423E128FB9313
+:10CBC000E32E41798B7C380CF870101F6D4CE2F22B
+:10CBD00012C6594DE3A400FCB1BF89FDF370DF60BC
+:10CBE000BF8C62BF8CDC4EDD4CEDB1DFA81CE2FBDC
+:10CBF000054658C7BE8BD03E31306F3D7EEC15F8F0
+:10CC0000B1B81E1821E967C98447A322B85EC80AD3
+:10CC1000B5EB8849E6F0B32647F17576EE476F85A8
+:10CC2000C6A91770EC0F70CFBEF675BF2FE6F35D87
+:10CC3000AF3B68BF5C2ABE6FCAD812BC1EB02C3591
+:10CC4000FD7CB94AF75D311020AE333A99BE5B1BCB
+:10CC5000CE2CF49C6DE9FC2E3187EBA3A8A75609D6
+:10CC60007D9A79469253A152708DAA753E9303DF47
+:10CC700037282EAF35787DB7168AF5D9C5FAEC7C02
+:10CC80007D5E0D9EB2C31D09936D5DF1B713EE9DE0
+:10CC9000FD65E58BFE34741DAA3FA48FEEF6232CB0
+:10CCA000F93BDE0F394F1D3C3BE1AC9B9F8427D203
+:10CCB000337D97A5C54739CF0B823EBBD075E27552
+:10CCC0008E57C2BFABFA09EC23EA270E2D3E57352B
+:10CCD000261AE66405BE6BC2BD2C0AF8E7D293851E
+:10CCE0009DD79FF547FEED29E57E54CF2EB3B3DEE9
+:10CCF000417EBDACE4B8907E3D7AAEB7F3DAA34C8A
+:10CD00004C21BD48EB67688F73FA5CA89F9E65CE87
+:10CD10006DD0EF309DDED10EFBB9CB1AF82E204F2F
+:10CD2000B4F59F083AE8EA37EA48C0F9159A4B5F2C
+:10CD30007038191B9BFC14F1F7C29EA5CB13A17E82
+:10CD40004BF236E2D785FD4ACFA36BE6B6E4EDBCE5
+:10CD50009E597A3E09EB4F6DE7ED47B95E40FECE36
+:10CD60003CDB2B460F09E80F13921D5CFF28333084
+:10CD7000C423B37AB713E5A484677765A1D9501BA0
+:10CD80004A6FBDA3939EF97946B190CFC5D28EF775
+:10CD90001B35767C7BA4C5A3025CDB519EC27AE77F
+:10CDA00024BBA723FC6B225A67A20A7C5FC42726F8
+:10CDB000D4871417E81BE81771D8D97498A7D2BA8A
+:10CDC000BE9CF4C0254E8B91E029FC54B0F64BD0AC
+:10CDD000CFABAF3DF3B37E7C98729CC71041FF355B
+:10CDE000AF7DFBCD5F518E7E6975A21B7048F3A3AA
+:10CDF000CB51BF1AD2FCA76FB9BCB5D239959CF7FD
+:10CE000010F437C2F3E22633CD7F4873C67C6C3F03
+:10CE1000ECFDE664C48F11C75AEA911DB4EF79A9FD
+:10CE20009F3BF8DC8A9D542E655EBB7ED1098F2F17
+:10CE30004C0CF54B80C7FFE1F0B8B800FD8A6D716E
+:10CE400087D6F8494FEBCFFD98E27BD0CBD391CE7C
+:10CE5000CFB11E4E3C5768B7F17EF4FECDA315B09E
+:10CE60003E783EA2036610A4378FBA60010612A86E
+:10CE700097B0284DBDCCD247D37E8C3D51F3FEA652
+:10CE8000F80CCDFBF18E3C4DFD96F4219AF6B739A6
+:10CE90004B34F5DB8BC76BDA57B82A34F5BC9606F2
+:10CEA0004DFB82034DDAF7871DB40F05C7CACB507F
+:10CEB0009F77FADCF558DED8BAA1ACA78375F1EB01
+:10CEC00016FABDF5F87CD8C5DAA216D6D5BFCB9632
+:10CED000B8E93CC08CFBA2069D0F94F8881EDB0CC1
+:10CEE0004E47B01FF7D15EEE17709FDE5200EC0088
+:10CEF000EC91968E18DCAF31B31E5223715F3A1855
+:10CF0000F9BD1A4DFE5F0C43393F4325BDB7D1C86B
+:10CF1000487F6C9C9AED45DFDF51C5FFE25F914F82
+:10CF2000CD88207E3202345C5A379E812AB84F6EFB
+:10CF3000CDBA4BD862DD3EDDADA98FB1FF44D3FE43
+:10CF4000A6F8559AF7E31D0FE8F669A3A67E9BF3B2
+:10CF500051DD3E6DD6EDD3339AF7233EF7D7231933
+:10CF60008D6AF5A83698FFD0A31BCA705F861DF3A3
+:10CF7000CC407A296C71D7130BD957FB26962D60BC
+:10CF800057A13FEB8DBA782AF7D539C81FB5BF2E08
+:10CF90009DCA03754E7AFE765D3195EFD4B9A8FC33
+:10CFA0004BDD382A7D75E55436D43550FB5D754D23
+:10CFB00054020407A0BC888D11F207EA68E7B7198C
+:10CFC000FCD578E27AFAA96F884FB6F5F0B761FD23
+:10CFD0003EF68F8AD1503F9CC288BF59A14FA4C74B
+:10CFE0007329AECA14A85F48E6CFDBC3ACEB500E82
+:10CFF00034185C79A85FFFFBA9FF6C340E60ECFE6F
+:10D0000055E5F1F6285EB7409D361B0D33CF7F36D0
+:10D01000BA8633F61C8A8CA154AFC07A7B387F7FE6
+:10D02000E1A9FF907E2DCF9B2707CE9BFF9D1CE2A1
+:10D03000BCF9B9530E1BFA590E5D4CB3E1BA0E0997
+:10D04000BF928BE585CD86B2C498178672F1A84E43
+:10D050008F90E5A7D612534A1CCEDF3905F508CFCD
+:10D06000CD616C1BF08B890AB7473BF5C0142ECFFE
+:10D07000DB6F3393BD73D8E09A8F780E7CFA4984C6
+:10D0800057424ACF892857DA6D1D090887FE299132
+:10D09000BC1ED7F1A4E20CAA87F175C6A5D82676E6
+:10D0A000B3CEBE381FFD3A6F4811E70C2DAE0128F4
+:10D0B0007F65FD7085AB0AE5C4E112D7409CCFA126
+:10D0C0007233D18FA7DCE61D884CCEE82A9A12E491
+:10D0D0006F7934258CBE9B6CE274C6EE52BDDB4288
+:10D0E000D8692FA5707D9FF60DEDB93B23480F3F02
+:10D0F0006C608B768580E3BB295CCE9DE911DAFFFD
+:10D10000E213F02B9D64A3FEDA5784D3796F7B7909
+:10D110001AE941EDB50025A08FF653B56777D37BAB
+:10D12000B33C0AA373CD69824F3DD7BCFC1F47A017
+:10D13000FD272B229CC4C3ED83483EDD251ACF88F2
+:10D14000B190DE3263E28052944BD3C4F9D84C9B49
+:10D15000B1171D9319A34C76E8679E356F0D8AFFB2
+:10D1600005B115A628A82FEA7FF71A2C97A46C34CE
+:10D1700045435999F5FC1A541FAB80B48AC85EF236
+:10D18000FFB90EE6356BA5EAE0F693906BAEA5D736
+:10D19000148F21F110E188780AF025BBF03D016F72
+:10D1A000F9DD7B029EB352C4396D36CBBEA43DF788
+:10D1B000998B78D23AE3CFA9DDF8E7B5EF85DEF6B3
+:10D1C00081898FBBF4E9306FB03F498E7B48CCE357
+:10D1D000B089B914D4E3EEB2117EE44C3D7F5F1107
+:10D1E000AC3FA7D96EA0737BC9C77D8CFCF6459F69
+:10D1F000BB89CFDDD8EADF7E84119E37219D5C4953
+:10D200004E4DF2AC22F930E46B903FC8172FBA3F75
+:10D2100039427C7091E083B5C4BFF6D5ADA4FAFE67
+:10D220003A0F9507EAD6093EB881DEBF53B749F0F9
+:10D2300041AFE0834FD3F3E6BAA954BE56E7167C5C
+:10D24000909FAB4E14F8B432DEBD0EF9993CBF9CF2
+:10D250006C718721BCFEF8A899A9782ED16C263C68
+:10D26000050A78F2B1588C9731DBD73BBAC6CDE8C6
+:10D27000F96DE7FEEBCE7937C4BB1EC1F13AE3642A
+:10D28000503FBBA17BFC39C41C36E4273BB64E247F
+:10D29000FE71C8E1B0A1DEFA5CCAA489C8AF0FB9BB
+:10D2A0001CB630A8FF61EB24FEDEEDB099A1BE33C1
+:10D2B00065327FEF71D8C2A1DEB055D4BD8C0EB5FA
+:10D2C000776FBD93F84F0953F6213D9459124703E8
+:10D2D000BB06F958B20FE9E0A6F8D9A3910E525255
+:10D2E0001C840FE31DABF661FD96F4CDC618077ADA
+:10D2F00043F356E377A5B11546FC6E74FFBB57E3C5
+:10D30000776353361A83BF1B97F5FC6AACDFEADC00
+:10D310006C447D3005F9565CA01F5997EF257F4579
+:10D320003B01F134B7B99CF8784E5339F171099744
+:10D33000D2C915F7A39FAEA649B12B388FC94AE7CA
+:10D3400061BD023A44F545A016E0B3FBB6CE8B5E54
+:10D3500005DFD5607D28D57FB52A34DF3D981242A0
+:10D36000BE7C28E814E566057CF721D0CF2EA8679F
+:10D37000E0FAC87F38DB369BFA73DB50BEE6A67056
+:10D38000395920E4E65C512E12CF3FB5BADE47BAD8
+:10D39000FC3845D8635DE9FA1341B70BF83CBAD0C5
+:10D3A000B5F6BDA06BBF940F851D0958AF621BC8B1
+:10D3B0004F78A5F8AEC5C1F65B22C6493450FC854E
+:10D3C0003E4EA292F9787F0DBA380BE637D1796CD0
+:10D3D00053D073E247C2FEE8C1F9DE5464D6809FA1
+:10D3E000DF76CFCFFE8DF0BFCCBAB5EFC5BA17331D
+:10D3F0002FC5B5E9D7C1DC71445B4BAD87693FBB35
+:10D40000AEC71F7A3D5DD6C1ED7719C722FDF2A0E8
+:10D4100007D90616211FB431F4DF04F3892397E1FD
+:10D42000137A7EF45DF1B9CBF09BA48121F88D8C49
+:10D43000CFD297529F83BA07E3F33CAF85939FFE09
+:10D44000A4C39D8DFDB497767C6340FB2CD64F78AA
+:10D45000E6E9E776E273C5C4CFE9E1492AEEDB29C4
+:10D4600083E70FA8170DDFF624F19D36140E408FC9
+:10D47000855047BEE3ED5B3E18BF63E91C7FDA15BC
+:10D480002E1725DD833E48E588815C1E752D395DAC
+:10D49000C9B8C6F6CDDF26901FEB0AF8DE1D1CC604
+:10D4A000A8C3FD1EE4F7C511A4F2B42AAC4501FDE2
+:10D4B000AFB5A417E911AD034C462CBF6B3BB1755A
+:10D4C000402AF5AFB7175BFB145BF8B863C761D9A7
+:10D4D00064726F9A8D76D21033D949EF8A78C00979
+:10D4E000113C7EEA5D3C1F8676138E5F8C45F9A564
+:10D4F000B7375B0F4E2F75E474B53B619DA3719DEB
+:10D50000959F19EEC767D76A8756AEFC86196340A8
+:10D510006EAFBCC88C055763973215D945FE51E7ED
+:10D520009B58167DEE8BCE71A0FD29F507619F5E9D
+:10D53000210EA9B883EB0BA32EB2746321FA997A5A
+:10D54000D0F98D52FC276EB78A529E8B0CE7536040
+:10D55000330D56AF29491387146F8472BAEA1F8CB2
+:10D56000F536E6A37312BD3DFB96F043815DFB0BE0
+:10D57000C4DB35223E09762406F177CC4F3F9AF979
+:10D5800033E203E1A40F75DAB5BB0D145FD0687404
+:10D59000F51C8176EDCA81CE5550FFD417F7EB57B5
+:10D5A000A1ACB17F437093F45BB9F23CC153D65B3D
+:10D5B00085DF774318C81F282BFFA3921CAA646C31
+:10D5C0001DED1B7BC3B42C482EB286AF3AE19F0BF6
+:10D5D0007CAF02014876D6C8492E685721EC0FE689
+:10D5E000799DD785DD0516C52417F45B1127DAB3BD
+:10D5F00087F9FB01F2FD23FCFD40D9DFF989F4BE78
+:10D600008FAC8BFE3264FD4FBC9E28C76BE5F56C7A
+:10D61000590FE7FDD978FB9706364CF26405F8FD03
+:10D620009E81423EE6B13C1197B377E0E5E351B409
+:10D63000EF857C98F58CEA31E5E2FE8C8FF833D2E9
+:10D64000778342B17395F78691BFFB4C7443CEF25A
+:10D65000207B45C6AF9497D95CA8FF55BD98B645C9
+:10D6600015F13CA87FFCCBC1ED9831AA95CE27CE11
+:10D670003DC8F97E77FADB8295AF6AF6B3CB7B556E
+:10D68000E1F6381EDCC178671FEABD99EC8B141FE8
+:10D690009D9B7F2AF85D2FE0ADC5D18178B1D8641C
+:10D6A000E6427B35F625E0CFB8C79FFB881F2F7871
+:10D6B00089FB7FAB1E7D93E4DE1CD541FEDCB159B6
+:10D6C000EE2F106FDB6C3EF22B2E58F91ACDEB9B30
+:10D6D0000CA137D83BB282E179B62BFCBFBA02FC71
+:10D6E000BFFA21E1AFF73B2FB1EEA3F52EB9C6B8D3
+:10D6F000B6361B3F17758A7D3A6E700C16F08A4855
+:10D7000045FFF97C5F6A948A41C7BE5E3C5EE99D35
+:10D7100022B48BCED5DA18EEFBF4E57FCB7187F01F
+:10D72000FBEAED811938665C005E7D52851E14802F
+:10D73000EF001CEF32F0D5BEFF9EE1DBDBE83739AE
+:10D74000F11CF528A37E06FB8E9B82E36246A47241
+:10D75000BCECD9C4CF8DF4F15E23526DDCEF2DCE3D
+:10D7600067AA26BE331CCF67243D8C8A600DE86F04
+:10D7700007BC760ABC76225E4BFC0D9CD3C0772199
+:10D78000E82B80BF5AB88E4EED82B7E3AE00D7715A
+:10D790003F245C1B411FA673CDDDE1E44FD1C3796B
+:10D7A000A980AB84F7BD5780F3BDDF139CEF4D75A7
+:10D7B00068FC1112DEDDC927FDFEC87987A0D3A25F
+:10D7C000EBA1D34B69DC4E64463FC599EAF7BDBE79
+:10D7D0002B3DADBDC2BEAFFD21F75D0F377D592991
+:10D7E000CE3BF5CFB7A576CBEFBE1338FE6FF3A7D0
+:10D7F000CFA8DDAB793F6BE541CDFBD99EF734F582
+:10D80000E17E5F19A2B9F48F8F3CD5F126D6AFD750
+:10D81000CFDE9D7F7DC20B0B0D78FE56ECE3FEFD47
+:10D8200005E9EE7FA5029CDF3578EB6D00D71B8FF5
+:10D8300035A8741EE6CDA373C0E5628EE787FFF3BB
+:10D84000939F01DE9C6766F27FB6ECCD303AB2BBA7
+:10D85000E241C90595B982F4C4124B9411F5A9129D
+:10D86000D09443E1CD258137140F04F43ED5C2C2D4
+:10D870006281CEA74E5528FE692AE3F1D450B6B88E
+:10D88000E1FD04236B3143BDC26A6C31D3B91FCFB4
+:10D890007798C2A7C9CC46E6C1F72C3686ECE0C91A
+:10D8A000F810E6ABBA548A679B52CCCF0BEFB23676
+:10D8B00084A13CBDF3C07D677F06EFD96A4F118F0D
+:10D8C000D796F96B1F1BAEE51CF0522AA7F37645DD
+:10D8D0009C2B2B614E8C6FD57FF77E2AF7974E508D
+:10D8E00057A918FFD2F11E23BD5BD21DACEF8039C2
+:10D8F0009FE7670CC575B2B096B448D49F37966160
+:10D90000FBCAC30E824B4DF1AA1CDCC79AD1CA6771
+:10D91000E69C807D53B3F26BD2D3C7A83BEAB1FD3E
+:10D92000B9A3DC357E63AB47457B25E0BFF4CF442C
+:10D93000BABC921D24E77DACAE85F0E993BA0354DE
+:10D94000BE3BF24F45A867F8EB7C21FD97D7EB2F44
+:10D95000907E02E937907CE0D37BCB7A235E66A48D
+:10D96000093DD0A2F443BEC08CBC94FC3237AD8BD1
+:10D970005C2D48BBBC3EA87DFF3DF3D7ABC5F3CAC9
+:10D98000782E17F5F8ADC76B89CFF0599102E3DE19
+:10D9900005FA1ECAD569CC935D097C76EAC20D6191
+:10D9A000C394EBC7EB25D6CF1358883C956BE7E7BC
+:10D9B0000EDA47B54C25FB40C62BC87D5890D6459E
+:10D9C0002E2EB9C2BE2DF921F7ADAB5CFB7CE6F57E
+:10D9D000C935A6C9EBB8BF2BBE3E9076797D40FB1A
+:10D9E000FE7B5E7750FECC4CD510C817C178628C98
+:10D9F0006B6CF7F27CC845891B222938B3B8231217
+:10DA0000F5C6C57B54C243667419FB00BE2E14F8DC
+:10DA1000DACA5A3E407C5C387C21E5D12D7A3C74D0
+:10DA20005C71B568BFC4DA68C2752ED9AA6D572D6E
+:10DA3000E28A2B7768FDA2D5C36F3A89FD56EBE2E7
+:10DA40007976A689F8E17C96CFE32EB4FAA9BE6C6C
+:10DA5000AB631A7F65DBC53AF207BCF4BBD6873DE2
+:10DA6000FD83ECFFAE78BBF70AFBB7F787DC3F3DE1
+:10DA7000DEAAB6AD945775AD78FBD341AE0F70DE1C
+:10DA8000921F4F47DE04E34E7FD5ECF5E0F9689135
+:10DA900083FB37156F3D9EB7B57FCBC87F3447F802
+:10DAA00039BBCB4B97F106430E7BEB79BC814BC561
+:10DAB0003CD1C107CACBF0B8A2E09D5AD247BA3DCB
+:10DAC000B792F955227EE86AF99AF4EB0D3E554B70
+:10DAD0007A96D367277D68E8858637513E7E57FE64
+:10DAE0006E290F736338DC0AFDE5A4E7B585B5142C
+:10DAF0007D887AC2CBE121F5841EE95C4F98E499D8
+:10DB00001DC6F30DBB9C07F648C7F340C1FF0D16B9
+:10DB10005718C2698CDAFAEB3B107F7C2AF9F7566A
+:10DB2000FCFCFD3F3CE6B8B2DD5F633F4F7A4377D4
+:10DB3000FA7F8D81E75DE4973928CE0FED29F4EF68
+:10DB4000497F9FBE7DF1A0D2FEE971E4AFF6B970C6
+:10DB50003E9BF87CBADB9F9A955F69FC8BDD8D5FFD
+:10DB6000B3A7C83E27880E66A42B12CFED272C81C1
+:10DB7000FDBD5A3C18D13155A3FFFCFF6E574C50E8
+:10DB800041B504F999AD78B9FECAB81E3B9DF9A814
+:10DB90009CC93AA874331E7F3F8739A99C27F29805
+:10DBA000DFCE7057A4533C4C472F8A9F7CF17FB245
+:10DBB000106FCE8E1CB60163EDBE2F3DAE3DCF4142
+:10DBC000E3B7EFFE9F048C83B9125FD810EF9A97EA
+:10DBD0001EE23CE82F252A9DB7B0538F919CA810D8
+:10DBE000B730B0D1FC1CED5F8E44A29B005FECBD52
+:10DBF00059F2453C9FCDFECCC0E349162BDE81D0C7
+:10DC0000B4C96F20D2CA9E9FE855B1DEC8DF6757FE
+:10DC1000457915A8670F09E7EFEF8EF2A21F7D0681
+:10DC2000F3133DCE628CF8DD6CC6F9DE5CE6E2F9FA
+:10DC30000EAC2309F5B0F9CD161EEFCFFC29C8DFD5
+:10DC400073BAB17F5A049DE726717E9E5BAAF55395
+:10DC5000AC49E77CFC6446E967484F67D25D6BB12D
+:10DC6000CC8DF6AD7FB890FCF60CED8793437E42E9
+:10DC7000E78DF2BBC841A50F62BB9D0A8F4FF7EC41
+:10DC800031537C047CD1AB3C28AEFFED8CB25F619C
+:10DC9000BB4711F645DDC315BED3E4CD06E8C9C3C5
+:10DCA000E78F3617F9DFE141318D4BF5DF3F3D61FD
+:10DCB000F26A2BF9F83DA8F7460E723F85FB9A6B86
+:10DCC00062CC8AF37FC2ECDD42FA696D02FA2B174F
+:10DCD0003E6936A0DEF011885BCC43F96B9D85CAA6
+:10DCE000BF811D8CE5A7600763F919D8C158FE1DD7
+:10DCF000EC602CE75FC80361C1D8D80C5733C7EF7D
+:10DD0000D0F959BB053C3BC7DF63A2F14F66B809A8
+:10DD1000BE9DFBFD32F3E2A1CECEA88EBED197C14F
+:10DD2000B7EEF98C47D883A1E3B99E15F3C86934DF
+:10DD3000927CCF69F2472E086AF776BA89DE67EFE0
+:10DD4000FE9CF24FDBEC9DF07529B0E409065E7F86
+:10DD5000FBE979935767E1FC5D9FE1BA81BEFF82E1
+:10DD6000654ED3FBBFC2FC1FE89FE20EDA958EDF43
+:10DD7000901DA05B871E0E725D3BA37CEBF1FB9DAB
+:10DD8000BB937025C06F18A71BC42325D47A57D125
+:10DD90007C6F377714625ECBED97D49071C62733D2
+:10DDA0004A08CE3F97F826E124F6EB7AE9BAF3FC6D
+:10DDB0005BE02993F77720EF74A01CBA1889FA5E0C
+:10DDC0008538DF6F6A4C7917D7E739A0B2810EC268
+:10DDD0005F0DDDC566F0FD9165F61E5339EED3CEBD
+:10DDE0003D2752E659695F52E6437B63C6408DFF8B
+:10DDF000317BC8B7FFFD702CB5B7E35077B2CD6368
+:10DE000030FE649A65EF1F714933EC9F8DC1F89322
+:10DE100059F1CA7E2C673B12C762DC898C8F9F9BAD
+:10DE20005EB21F49E9566705E96925C85C82E4418D
+:10DE30009925020F053BEB63EC319AFA4DF1FD3465
+:10DE4000EDC73B9235EF6F49CFD4BC97E3DEEA2CA8
+:10DE5000D0B4CB8DEE4842FB0CD641F4C0B6A91429
+:10DE6000A797BDFBF0CD99509FB07D8A13D5929DA9
+:10DE7000E2FD845D655EDC8F7680A70914A853C53A
+:10DE80000FFCE661EC4CA7FF57EE796ABFCB710D32
+:10DE9000FA7F377ABFE4B34B9B2D45C867AFD60EE8
+:10DEA000D0EF4F7E86D62EE80E6F3AE9427170BCF5
+:10DEB00039A8B26D21F0062352391EF272C2219E9A
+:10DEC0003F76ADFCEC0BE4673101FAE82C757EB9C6
+:10DED0005C93F3DDE5E8A7FFB3CA281F4FE4F52DF7
+:10DEE000C0DFD500BEB3799BEFEF134BCF3DA8E762
+:10DEF000627EA90BFA5F9221F4A7CABDF7F7290C3D
+:10DF0000BC672B3ED3B467F72A6B34F5D589DAFAB0
+:10DF100083256B82BFEF8E2F2ED834DBE4A6FC4F17
+:10DF2000C5E50DC11FE47CC6BC114E717DB761BC57
+:10DF30000A3CAA2E7CCF88E7B0B775234725FFB9E6
+:10DF40005365B5A1DEDF93C1FDFCB7BE114E713044
+:10DF5000D7DAEF47004B8A337C89CBD18F7AFA8CA2
+:10DF6000C1FBEE11FD9F2DDAF8F36FF07CF46546EE
+:10DF7000719F67A338FFCF693C6930A01CECC1F1E9
+:10DF800025C7EE37A05C695F14E1C1B8FE9AC536BB
+:10DF90008A07CD4DEAF8C0025BBFEE99038F5800A7
+:10DFA000DF3EC624C820B9DA8E4611D437661C205D
+:10DFB000B97ACB1BE12D86EB58CF463C97403958B8
+:10DFC000CAE97C26E28D902FE863AFB99F75CA1B22
+:10DFD000E40BB87EAC1F78E64F871F8179D71CE42D
+:10DFE000748E11767AFB7E5A907DCF1EE77469811C
+:10DFF0001F1EA7A4A3EF7D1B4CD6CBD27903C5DD92
+:10E000005C2D7DEF407A8EB82C3D1FBA05F6A7E651
+:10E01000657E9FC5B9E6819417DB9D3CAFD9A412FC
+:10E020001DCA7A5BB33A0EF1569F7F2EE1CA5C4E51
+:10E03000A24F796FD4B211FF9C887273D91E230F3F
+:10E0400012E96E9C752A73048DB3F335F322CA73FB
+:10E0500013F36F97F27ACF3FA24BB278B92A84DCE0
+:10E0600003391D168B72BA4221BBF2C89EDEA50889
+:10E07000A7230A6B7150DE168F539EC4BBC3E756AD
+:10E08000BAAF243E9DE293A57D29EDCA297BA60C5B
+:10E0900044BDF283C6394760E7D8A719C984E7773A
+:10E0A000300FE9C147A2CA07A05F6282880F381209
+:10E0B000D5D18A7CF9C8880805CFFBA1FFD5D8BF88
+:10E0C0005CD791B0F201FCDE0919973CE8BAEE8901
+:10E0D0001BA3DE5B720B9E6F4F6776B42B6F57B935
+:10E0E0009ECB5EE7F429F95E8DE28BC679BE9D3149
+:10E0F000F1AB0C3C2F5EF90BE157157033F238C4CD
+:10E10000ABD5733BEDD9A7157E1F8A93EBFFD5C323
+:10E11000CFFCFA0ECC9303BB5B81F9CC69DA4BF7E9
+:10E12000FEE8EDEC4E7BE7FFD19FDAD55E2A8F1833
+:10E130005414F093EBEDA64E3D5DEA7BDB789CFC3E
+:10E140009B237EDBB614EA2BB645101C4F3F69F6C5
+:10E15000201F3FBDC54CF6CFE9E88E63CBB1BE2B87
+:10E16000DBE9A1D19C9A7BD1161A1C1FA2FC616F1E
+:10E1700087D17D1E279F30B7E0F9EEE2A732B6A027
+:10E180003D757280E3D91DE80F7C368EEE19606E06
+:10E19000FEFD6D821E91BE1CA07AA8BFB3911EB178
+:10E1A000F8853EC4C7E4FE9D7A229CF2E84F1F9892
+:10E1B000D413FD65AD86E7298F87A9560FF2E3A535
+:10E1C0005BC2490F5C697767E3FACB7E77DB1D059D
+:10E1D00038FEFB710CD7D3DEFC02F92B03FB1B5A74
+:10E1E000BE9F6B4EE67CA053DEF2B8DB5918779BDE
+:10E1F0004C71B70583E2305E55DEBBC8E36EF35564
+:10E20000C54579070F85CE231F3D489CAB4AFF4982
+:10E210000CB3C4231DBA19ADB7FDA1B42D68EF4CE2
+:10E220001F24F29F5987C89794F876ACFA55F29F4D
+:10E230009879BC5F78E873ECF2413CAF7881E56B8C
+:10E240008DFFA67AE5B71ABF4A751623B99B5FEF13
+:10E2500028B81BCAE502CE5549E593107E4B1A3605
+:10E26000BEF80EC1E5F11F7F8CE31EB092DF86BDC4
+:10E27000C3E1A7B7671658BE12F4B459A3079F7835
+:10E28000F4438A3739B13B3307F76D8EEA3B81F7A8
+:10E2900071B5D97C9FFC0CCA5D070ED1BEE8E7DBE7
+:10E2A000E5DC5EE17CA512D71183F12EE58B07D169
+:10E2B000B930A7F7E3EBB3097ED29FDB7E3AB4BD5A
+:10E2C00025E729FB97F393FDCB76FF25F6EBACC949
+:10E2D0009783F2B97FBA4393877D36D2971365C58A
+:10E2E000E7FC1CEA6C34D483F0E6FB3ADFB94BF868
+:10E2F000798E1A56DD6302FC6B6D7838CC1DCC47E5
+:10E30000AFF15C47CE57C695CA3CDA4D83843F7B5C
+:10E31000001BD04DFEEDE38827955DF36FE979771B
+:10E32000F9B79DF9B6FFE0F9B632BFB6B0CC501BD5
+:10E330009C672BF96161263CCFC2737FAD7C2FCCEB
+:10E34000D5B6EF8E3F0ECEE47E95C298D0F9AE7F63
+:10E350001EC4DFD7B3167EFFA0908BC304DCE5BDDF
+:10E360005F524FA9167C5BE6790E6BE6719BC34446
+:10E37000DE0E7001CA73ED72BF5B7C26C955793F12
+:10E380009F027D4D8F0E952FECA3798C641D54BA9E
+:10E3900098DD8825809FCAD1AC9CCAB1AC96CA7161
+:10E3A0006C039537B3062A6F653E2AD9A01611EF84
+:10E3B000792FCF331DBFD080F2B5F08ED07A71FBAC
+:10E3C00015E1E0A1FB03AF150E6319BFE7AF0B3CEE
+:10E3D000FAA7137EEBE1A1CFD71CC1FC7471C92849
+:10E3E00044DC64B4831D14DF5AC65C541F739570FB
+:10E3F00028F6BB8D3CBF57078FB2D0787141C06300
+:10E4000015CACEA2C03E65673AE8B9DC2F30C4E237
+:10E4100091FFEBF7513E2F8C283DEFB0E37D30AB01
+:10E42000A6501E7741E9F264A8A766FE6A0AE5795C
+:10E430000F2B7D01F3BCD39F7D98BFCF2D2D08738B
+:10E44000C2B8AB1E9982F98C6E1137ED16F1D2CCA1
+:10E450009DA7B91FCBBDEA1EBA6FCC3DC0EAC475FB
+:10E46000CABC7035999FAFEEB1BB7B66C27C13C648
+:10E47000F9D6704897F69E0A74DCEA0B6318EFBF72
+:10E48000D6C4DBCBFB6CE4FAE43D37BB76652E5794
+:10E4900092AE3C0F1867008EE35E3590F2E3DCBB72
+:10E4A00015E7E5C60B4F722765A2DE8549F14017D7
+:10E4B000FD841C6EDD959989FB949D29E27E621393
+:10E4C0000B108ED392CAB3B17F99179D2DF6A5BBC1
+:10E4D000724AA62B13DBEB9FCBBCEC9199EE3C1C54
+:10E4E000BF26E222E59BB5E5BDBFC69FD8354FBD2F
+:10E4F000DEC5BC26E22BDAFCF4F6F926BACFA9B0C9
+:10E50000DC5D8F21CA374EEF188CFA31F43B1CC703
+:10E51000AD31F913F2548C42E6F9EFFA7CEF3DAFDE
+:10E520001DD4E4B74B3AEBCC6F3FC7F3DB03F4F5F4
+:10E53000E8721694DF2EE946D2DD50CC6F8FC47A94
+:10E54000C67C6C37E2FD6394DF3EEA985FE4B77FF8
+:10E55000A8CD6F77FDF3BAF2DB4F8AFBDE4E5AF897
+:10E560007D49F23EA965BBF9F9EF3285DF27B5ECAD
+:10E57000397E9F94B40B1789F5551DDCB606CFF98B
+:10E58000163D3E97EEA362E21E5407FC04DB85F2C3
+:10E590005E527D1E4C0DDA83A437B790DEA5CF877F
+:10E5A000A979BC8CECC11A9D1E5D9D29EC4121CF3F
+:10E5B00098D0FF168A6F711D56B2CF4CA4772E7B70
+:10E5C00062B9D38E7541576CC70E3A7793EDD9E394
+:10E5D00031840B92CE16AF53487F95F0CBDD6E762B
+:10E5E000D13DC6DB7B93DE0AFAB6C863F6727B1BAD
+:10E5F0007005E3E177467524A19EBC734FBA1338CA
+:10E600002C7BA5DBFBA777E8EE9F7E4A73FFF439EE
+:10E61000FC0FF5B453062FF63398A5FF12EF252E05
+:10E620003A65747A1D81FB98AF74EFB084BF59ECE2
+:10E63000D7B5DE43ACBFEF59E63FE8EF235E2BEEE4
+:10E64000231ED1CD7DC466B55925FDE16BA3E65EE1
+:10E65000E21BC53A8B1DCC8BF7FC0E6D356AF6BFFD
+:10E66000D8BF81A13E147ED8A8F123981DDA7A8301
+:10E67000C40771BF4857785B3BE1692678A6D03D57
+:10E68000CF45BA7B9E259C3AEF79EE6F25BC1F7A69
+:10E69000F00515F9C1B5DEF7FD43DFEF7DA5FBBC45
+:10E6A000F5F774EBEFE5EEEE9E6FB9EF792DCB3415
+:10E6B000EDF5FB5E70E0A7DA7BA8C57E7BE0E7BBEB
+:10E6C000DCEFB64CE1DF15FBFD355E800674F89794
+:10E6D000C8530F22594E88E07CADD3AE1F1E46763C
+:10E6E000D6BB8E98321BD2BF9053E5424E8115C7E0
+:10E6F000EB025F9C3E1E47907F94DF5F51E8E7F19D
+:10E7000004834F85CE0FBABD58D19CEF76BDB79824
+:10E71000E7190FBBC8E3F4F4E7FE326FA8C215AEE9
+:10E72000BDBFA19B3C22E9C7013D9E99508F37F0A8
+:10E73000FBEC42DC73BC494D0ECE2372937F67B273
+:10E74000C59780F86C4B74C7671505F28D46615EFE
+:10E750009142F6A0104A513FC238CF764CB2ED8BB1
+:10E76000F9A3913FC23C1998BEDD3F989BBBF86F5F
+:10E7700060963B310BE4C971C5BEA600BEFDCBD08F
+:10E780003309289FCC78AE9D4FE7BEC9F85E7F3F26
+:10E79000BFDFE020FDC2F35385EC8733D8D990204A
+:10E7A0007A5D1726F21A757FBF40D853F2EF171C17
+:10E7B000872E1601DF9ED1C4F3A897C6B70A3B8CFB
+:10E7C000DFDF3AB7BF95EE7F62AE0227B7C3A57D04
+:10E7D000D54FBD16B979A5F8A2A5F1A735762EDBE0
+:10E7E000117355E7898175F3FE8F3F1041F2E6F80A
+:10E7F0000303C8CF17E8BF8DECFE19B5DA38E3592B
+:10E800002B3FD2E0DF6CCF679AF7FED88EB07EB098
+:10E810007EFF8B7DC64E03F89DDD6D1E8C7406FB5E
+:10E8200036352BC80EF63F94369AEB01575AE71946
+:10E830009AC73111272AD7F949DD51AAFBEBFCBA57
+:10E84000781E8FC62E95A5E90D46F7E474283D9CE9
+:10E85000A1FC2C9F6671BDFD98C8833C26F2208FD9
+:10E8600089BCC563224FF198C85394F9A3C714E635
+:10E87000C2788AE94AF993B315CA1FBD07F1AF669A
+:10E8800049470EE6DBD5E4FA672A2AE58FAEC4F5E0
+:10E8900087C81FCDC1BCF75D5977FE08F5F8533D19
+:10E8A0003C742FC9EF774CE67513A78F57B246110A
+:10E8B0003D78FBBAEFC37EBE50D416C2E797153A37
+:10E8C0004F652EBF69E265F24B1FC8E2E70BEB759F
+:10E8D000E5D62CCECF5E11E518F5C154CAFBD9643C
+:10E8E000A6BC1F18C765083AFFD7E767E5BF6E6E7D
+:10E8F00041BE21FD304F6425F273CF64EE5F89FD88
+:10E90000A599E76DF97D0998E785F13E786F063B9B
+:10E91000CC5C3C0F8CDFDF27F7E109B10F74917EEF
+:10E9200061204FACEAE0F14F908F8CCD726FC6F54D
+:10E93000CBFCA5AAC8BD1437F1429683BE83F9D299
+:10E94000FA811FAC5608CE5DFC70CFE0FEE8F3DF25
+:10E95000BB5BFFD9F9BEDF642506F2A782F2A65E93
+:10E96000C079C875CB7904FAB93C5E4B7F52C0DFE1
+:10E97000B53615E944DE4F9BAF2AB32686F8FE0371
+:10E98000B16F5549E57B711D4B6AB9BFADD31E57B9
+:10E9900036FCF863DCAF8356E273DD7DAF5F67D58D
+:10E9A0006B07091EB0CE99B8BEA075BE9B15E417C3
+:10E9B0003CBBE7C3DF20A8AF777DD79AC76CEEC119
+:10E9C000EF43ECEA8F860D0DD2A3CCF2FBFEDA7B8F
+:10E9D000C6CCF8F71060BC46617F340AFBA3294C13
+:10E9E000FCBD1A9D3DDAE8E3F13C8DF1268AD76142
+:10E9F000E2EF2B48F9BBE23D1EDFB32291D17B9CB5
+:10EA00001FD281E2DF4FF2A0F3BE2805E41CE0C371
+:10EA100019BBFB02C28FB997937C506FB03A119F1C
+:10EA200077BD7DB3B0ABB8BC2912F2A508FBC175A8
+:10EA300064F524B95328C61D6CA925BD7608F308D2
+:10EA40003F8BF0473CB05F638FFD5F0DF62D3910B3
+:10EA500068000000000000001F8B0800000000009C
+:10EA6000000BFB51CFC0F0038AD7983330385A31AE
+:10EA700030E45933305C07E2307384DC4B71049B23
+:10EA80009AF8A73C65FA374832306C02E22D40BC58
+:10EA90004D9274FDB7B410ECBDAA0C0CB781FC6E9E
+:10EAA00020FD5D9D816117907D07882F83F840CC04
+:10EAB000ACC6C0200EE4AB00693F20D607E2BB40E5
+:10EAC0007E9A1A6EF3EF69E1B77F9B062AFF1D1A43
+:10EAD000FF923A7EFD999AF8E5DF1190C7861FDB19
+:10EAE000911F1FEAF6B44927B4C207D0D2F54E13DE
+:10EAF00006860BA60C0C22D0B4BF17495E0D28B6B3
+:10EB0000CB04C29EAB074C7B66403E8E7C310F2807
+:10EB1000BF11286F648EDF7E056654BE002FA69A53
+:10EB20006F4C08F6042154B9C3C298EAB9441918C5
+:10EB30000065838486D80300000000000000000008
+:10EB40001F8B080000000000000BE57D0D7854D5F8
+:10EB5000B5F63E73CE9C99644E269310C240024E89
+:10EB60007ED0A8098E1030261372263F242401C3BC
+:10EB70004F695A699DA045DA8222DA5E6F2F5F19CC
+:10EB80007E1A2245C516ADDADEDE812A4FDBEB7335
+:10EB90009F60A9E586442610100D3F11ADDE7EB6BC
+:10EBA000DF8DDA8BA10D38C160E9F760F9F65A7B89
+:10EBB000EFCC9C939904D4EFDEEF071F9F9373CEA5
+:10EBC0003E7BAFBDF65A6BBF6BEDB5F758C944E25B
+:10EBD000AA20E40AFCA357DF6442E8A391AB785E65
+:10EBE000692741C72D84A4D9F7F6CEC820649E2694
+:10EBF0007B6B3D844CB2B7F4906242CA89CD63CB43
+:10EC000021A45BFA4DEF0C7A7F34C5EAB511F8F711
+:10EC1000002173085967A77FD2F2472FD22BFDFE40
+:10EC2000E85F2D2122115223371209BEB74BBCBC1D
+:10EC3000AE2DC824A49AB07F732F926A5A8C54BB0D
+:10EC4000EF6D243308A972D15276F6EE0A2B4F08E5
+:10EC50002D5F4658FDBADDF8BE8C6C1F929D701773
+:10EC6000919B8A687D9755E37B77ED07C409E56240
+:10EC70009E433FE00FCA83EB494AC61907FDFB36A6
+:10EC800072DB15995E950984DC1EE58BF94A481004
+:10EC9000F9D6C1BF5748D30CB827E4456C3F5DF0A7
+:10ECA000B1AE9FB869BF334A88B7967670529DDE81
+:10ECB0000D7C29AB563D367ADF5D336772BF46C89F
+:10ECC0000FCFB5679142FA796835F23183F3B1FB22
+:10ECD000DC4BEFDC47BFF7D511AF8DDE1FB07A27D5
+:10ECE00037158EA6C757979E44683D4F341D7260F6
+:10ECF0003D84FCED4A26AF278F90CEA6DCD4409C05
+:10ED0000EFC4F5F10D2E426CD1FB1D3AA96BD7462D
+:10ED1000977B0906733654BF1CE92CE3BCFCA14465
+:10ED20009ADBB1DD661CA7039CFE1EFD90A3BF10FD
+:10ED3000DE871D16DA8FE090853C4FABE81CAC4CAB
+:10ED4000067A37E996303CEF1C5443C00FE26ECF91
+:10ED50005A54349AFE03432B6662BF02AB0DEDFE9C
+:10ED60006090F65783FEBDE89847EBB9306871C9EB
+:10ED7000745C9FE0CF0F04DA1D2EF86E201DC7F3E0
+:10ED8000F10DF4EF1B12F3E3F1B9DFC80D6850CEBB
+:10ED90006EE4C7E085637974DC3A772A5EE8D77859
+:10EDA000FCFC016F47DCA77BC3552E5AAF2FE295C1
+:10EDB000408FD207099990037AD179D809E3DB48CB
+:10EDC000502F7C4D9549D3593FBCB207DE1F974168
+:10EDD0003E7CAE30F663841EA0EF06A0D38DD7A78D
+:10EDE000797B4FC13862FF36255D4FE9BD50A26087
+:10EDF0003DBBF54D7E05EBBB1C96411E573379CAD2
+:10EE0000F004365A81FFF7106FD003F512ECF74F7C
+:10EE100079FF7FC2EB13ED740EA6FB15A0AF9978B6
+:10EE2000414D6AE4F5DDF0BD6F15A37FDAC36B25B4
+:10EE3000E0DF75EBFBF11AE274EE80EF6981ECB56F
+:10EE40001109F836F5A1305E776EFC7D37D097BAA0
+:10EE50008524812D78A2DA9206DF3D316F4A12BCFB
+:10EE6000773651C5A7F6C0E7753DD043FBB3B35A1B
+:10EE7000413A770E52FED372CEA0CB0B7AED0C7ACC
+:10EE8000F8D5EB85F207393F0EF076BB381DCEA0E2
+:10EE9000CECBAD2D8472CE6010AF21DE4FE2598310
+:10EEA00072B78ECBDD416BE026E07BC6207113AAE2
+:10EEB000CF07CED74F867645FDE6F27B9EFD9FB30A
+:10EEC000E0FDC441F2AE75065CC32DD0DE0DD00F5F
+:10EED00027DCF7B54868A742A847FA650B2105511A
+:10EEE0003B9571A969FE1D1EB8AB413D1276A06C21
+:10EEF00050B548A9B17A568D7AB093EB41F56018B8
+:10EF0000E584EAD9610BE553F01CD5332A5F079AF3
+:10EF10002C38DECF4554B4C3A4209CB52865B41E5C
+:10EF2000750EAD9C09FC16FA34DA7EFCBFA15F3B7E
+:10EF3000693F0271EC9A684FE89BF9FDB8FAE60A5E
+:10EF4000A2BE75527D0B023F9B2C49F9A07F6D1626
+:10EF5000D41377757B37D397D5A86F19F7307A26F6
+:10EF60002D0FA11E8CA7773B3D2EBF02F537333DF9
+:10EF7000ED1C7C6FA30DC66339E176E27237DCFBD2
+:10EF80001E667A6DD633B31EA6FAFA503F73B644A6
+:10EF9000085C3D9B1B51AE692B49A87F09F4B01357
+:10EFA000F4B0F8FF1F3DAC82799CEA5D9A766B8FD6
+:10EFB0008BF67B7E84303CA43DD103F3784DB68D37
+:10EFC000CDE353DFBEF37E7A7FCCEA40FE1F9B4841
+:10EFD0001F16C3BD8C7AD79DB3357B1D7D3F3F4344
+:10EFE000C2F784AC42FDAE1578091E51FDF1F74B16
+:10EFF000644E3A947B7F4715FDFED501E28557AFFD
+:10F0000066CB58DFE141C2F498EB672DEFEF61FE6C
+:10F01000FEC2251202FDAC0048429F7F7C3632CDF5
+:10F020004E5F7D68B95C4472E97C2CF8C571460D71
+:10F03000D7FF5733641DECC6E1F529219283F5858E
+:10F0400041DE5E7DD81692697B17F2F35E0813C02D
+:10F050007F91EBD7D1F73DAE8F5262F57380CBEF46
+:10F060009FB8FC0E723CB1E3E6A64512E5EFABF9A2
+:10F0700079A85F17F23F9A4628ABEFCFFBCB19B8C0
+:10F080001212B6025E32D723BE7FD51DF8B244718C
+:10F09000D540E87D278CE7B97D1FCD802B714F408F
+:10F0A000DC351E3EF3091C16E9DB0C388454533959
+:10F0B000991395934991BEC3C037DF30C363A46EE3
+:10F0C0000D8E4BB98BF1A5FBE25B59F05D07E75B59
+:10F0D000D7505F16DAC73A633D5DD6FEE54DAC7E8C
+:10F0E000FCDEE762E32AE87999F7EB6949220C270D
+:10F0F000B2F1F3F1EFE72A7D136EA174CC3D267BCC
+:10F1000037D2477307FAAB491C3BB45B4A4379AD2E
+:10F11000B86494D7AE8B4765E00BA557067ACB232E
+:10F120007D32B3E34CCE7C5CCECA23A70DF65DB432
+:10F13000DF1539DD00ED5F1860F62A115F85FC1CD4
+:10F14000E2E3FCB2D0571272DC42E5E508A57FDBB2
+:10F1500018DFD7B86403DD42FFAAEC0E035EAFB838
+:10F16000946EC2FF467A4B9530F2AB14F8E549CC69
+:10F17000AFF5523AD65F36F0E9F865B62BA2DE2E2F
+:10F18000E063E168BA0808B5A05BFE3F9FAF9DF061
+:10F1900007F35F8E829E92FEBD72530ACC271ADA65
+:10F1A00093B26A89E172DECF46F896365527F4CAE3
+:10F1B00023A19F57EF9342B58037BC3F433FF142B5
+:10F1C000B1CD03766892E709A53F46DEEAF9F72359
+:10F1D0007CDCA0633FBB67BF9D05E5BAA66FCC860C
+:10F1E0007198EF79DBB18EF2FF28D79B8E0D7558A1
+:10F1F000AEEC1279F45618977CA66773795F7A386B
+:10F20000DF0E71BB7190CF9B6F6D08E0F5CD0DAB3C
+:10F21000F07A7AC35ABCBE7AE9450DC6AFB7200F63
+:10F22000E7AF3AA55D89E757950E1AE5E6650FC584
+:10F230003BB47CC3E08AEDB7D27E1FBF6441FB7C48
+:10F24000BC206F4CBC22EC8728F78AFB6755C0B7FF
+:10F25000C6014A6ECEE8F266792D23523BE0BF32FA
+:10F26000EFEB0AA1F67241F12E2D16C71C38975903
+:10F2700004F51E90FEB0649627311D65BE3EECE796
+:10F2800082F0EF144F4AE2722794BEC659E8A732C3
+:10F29000FD2AF3BE5BADD3F66A0B7735A25C0C2B6F
+:10F2A00016908BC6C2BD7C7C5D381E0BC47C562C70
+:10F2B000D785809EC10B48676FA13C11E8DB669142
+:10F2C000512E17786C886713B63FAC9030E89712D0
+:10F2D000C6713A4EEB01B93841ED1E7BDEC7EE69CF
+:10F2E000BDF0BE3BC7A679819F6E118F5865908F88
+:10F2F000C6FC59C7BD94EE5EB78CF8B2F752A59222
+:10F3000046EF4FC0FCEA89CA671997CF1330EE2049
+:10F31000C72119E73F8197457D5D97721F2DA6EDA7
+:10F320009D0859E37EDF546DD4C73BDC0EC37D7569
+:10F33000F604C3FD89C1996F36417B947EC0732466
+:10F34000B8DA407F17D87B68CF25E1FC7FF472F5EF
+:10F35000E0FD502E64A4CB4C47EFA5DC2797D27A72
+:10F360008FEF93514EABDD46BAAA2EBE791CE23820
+:10F370000DD4BE00DF5ED6151DFA7D625F4A68239C
+:10F3800095CB970B5F77006EA0FFB405B49D2AC2A2
+:10F39000C6B732C358CFF1C1F7BE0F76EA825D46D9
+:10F3A0003B57F9D7435B005E9D2A7EB007F87C800F
+:10F3B00048C8A7F273BB65A86F59C8F8FDD2E546E7
+:10F3C000FEAC593AC164FF8DF1A52A0F8B13CDF520
+:10F3D0000E617DA510FFA1F7959A312E34178C414F
+:10F3E0004CBDE5A6B850A987C5854A212E24CAE59B
+:10F3F0009051769FDE63FBE679DDACDF09F5DF42F5
+:10F4000056413C8544168F835B36F1F88AD1DE1273
+:10F4100065A704F250CADBEFB0B63B802EDFADCC5F
+:10F420007E91487ADC7895D98E10F220CA95E02337
+:10F43000710549C61CE83F2F63B67F9C2F6D743859
+:10F44000AEE03C10E4F8C51357DFCDDF67737D9F56
+:10F450003740ED66068C97EC02BB71FC12D1401F61
+:10F460004F5179672DF75F8995DB868176944B5AEA
+:10F470001E469096F7A2FE364D66FADB9D53ABA46E
+:10F4800031FB1957DFCD7A3040824F15D3713D9E45
+:10F490009FF7E452FA5DEF3E61072C3AEAD53E86CB
+:10F4A0007B4F0CAE4379BD40E515D83E5AEF4F6B0C
+:10F4B000B1F3FE7F96BE9BF57C44FF47E93BB35B0F
+:10F4C000C7872DD89FAA8B0AD6D37099E03C6ED6F9
+:10F4D000FF13DC7F7B597F53F3C27C58F83EFAC799
+:10F4E000E453EB3BF3430E0C106CBFFCDC7B32EDC2
+:10F4F000F9E7A6EF42CF85DE5EB3BEFF27E9B9F993
+:10F50000F9B72D1CF727D0D3A8FE07B1DCE61452BB
+:10F510000071B60E29D9BB2907F49DC57DCCE5271E
+:10F52000C8221E6B0FFE91F6AB850A4B2A65F51AB1
+:10F53000D23F0DE461E2640FD6779FA53F13EE3F03
+:10F540002491CC9B65C0CF643FCCBF924EC8C3947E
+:10F5500024C9E322CB6712F2B81CB0CBB43E6920B9
+:10F56000FC5789F2993C443C80076F90020E786EFC
+:10F57000A37CD26879A29C469C48FD37E4D742AE72
+:10F58000740BED5A18E3F025D6C17EC1779C3F96E7
+:10F59000BBCEDC4CEB2561E9CACDD17EEEB186B2A3
+:10F5A000BC1AF433F4E3FB206EF58CEA7D3E0EDFEB
+:10F5B0002D9FB29F607E909F16C6CFA025D9FB7C61
+:10F5C0001CBC35FFDAEB7F2B995ECB808FB78CE6C6
+:10F5D000A33448F9077C50FE7605FCC43237932FDC
+:10F5E000F9435587380D91EDA1E971E858C3E978E1
+:10F5F0005CD66FA3C886C855EDC89F0330FE1AF0CD
+:10F600002F837C3B46BEE6C92AD2253790B538BF4A
+:10F6100090B005ECC878E361558822C338F65D41A7
+:10F62000BBDBCAE9B3D1E7DACCC4E3253778236181
+:10F630003A4EE443364E07E61BE5723DA7FF414EC6
+:10F64000179827A8BF14EAA7FC92FFACAE8D374FDE
+:10F650006C17FCE7FC32973FF025D67F517EABCC90
+:10F66000F42978EDE3B66C525EE27113F22E0D1EB2
+:10F670004D347E6B4371F47B8E6CE1FD0D4A57A3D4
+:10F680000FF3B85CCA5574DCA07F35463E6EE6FDCC
+:10F690005ACEEBBD4BD2FF1EE4E106A9E91FE04ABA
+:10F6A000AAFB50FF40C6A1DCCD44FF6FFCFD06D095
+:10F6B0005352677C4F9F6FC2EF9AFB707D4A3C3F6D
+:10F6C0002CE95B64F6BE15BFD38DEFA91CB6C173E0
+:10F6D0002A2F449E09CF193FA99C103BBD6FDD75B1
+:10F6E000F79781AFF4FBC7B07E72DAF0BD150C441A
+:10F6F0003ABB4A33D9F559903BEE9F6E6ED691AF27
+:10F700002A59CBFD67369FCDE5F399FDAF6C1EBC42
+:10F71000E05231AEA524E9A130BDA6BBC23AC40374
+:10F720002790BE20F863CB96CA063BDF6C9A5FBE7B
+:10F730007C8F71FE5DBE3ACB70FFD587F20CF781EE
+:10F74000F5371BEA5BB16596E1FE9EED6586FB959C
+:10F750003BAB0CDFAFFA4983E1FD379E5B62B85FDC
+:10F76000FDC29D71D737C57CF788E5DDD54DB45F07
+:10F770009BE1550C5E54A2EB971686C78CDF51F1C6
+:10F78000F32873A01CC15084594E15D3FA67FF8823
+:10F79000FEAC33CCB7878239190015F41C4543FC05
+:10F7A0001FD4FBF233A378A0CAB3B231DEFC2BE83E
+:10F7B0005178393FE9AF8271D315633985AFD76A84
+:10F7C000DE08C661CCEBB58A671ECEEF667ADF91A4
+:10F7D0005332C02ED1BA3DB84EAB5DDD7C3A6EFFE0
+:10F7E000A825BCAAFEF1F6FCD0CFBCC4FD9A5B1CD8
+:10F7F0009181BCABED57944E23EE11EBE40B5851C5
+:10F80000529AF31CFA630B803E989F8B19DEB1D39A
+:10F81000FFD83CCBF8DFC0CB373DE4B2023E6EAA46
+:10F8200036D2D9C07114D54305EC446981E93DD085
+:10F830003903CA19F1520F97474DE1EBE573C81C24
+:10F840001C07AEB78B84DED6B0380771C55F47AFF3
+:10F85000BF440BCDC2F651FEC4F3D70AF292E1BB0E
+:10F86000056DC463A3F8E491D91B5D9580F375AB76
+:10F87000B78E96AEF2F278932E239EBDAE80DD3722
+:10F8800056B3F8537DA00FE3808DF78436C275CA56
+:10F89000AAB0827498F8FAAC279486D880F3378B94
+:10F8A000F32B4BF095F351D8F129AB8DE3D8586C7D
+:10F8B000E4D742CE4F339F17723E2E34F1B10BFE88
+:10F8C000A07C999D808F0B381EB5CFE6FEDD707A47
+:10F8D0005CBFF1591E1F13F2A398E635613F46E65F
+:10F8E000372EBF8F831D079CE7E23885CF7B89F4D5
+:10F8F000C89FDFB2C30FF1D60CAB61FD621EEF6B88
+:10F90000693E5BEF28CD9011F797BADF30C4994B71
+:10F9100047E2A3BA5633272A9F5D03CCFF68759F41
+:10F9200096619C1AF219CEDFC2F923E27F07F8BA7A
+:10F930009199AEA3D382D9808F8E5D0C66AF2B8652
+:10F94000F88F8472D279EB03D92C5F80C773797BEF
+:10F95000AF0C05D17F3B3630F6FAA2C0F966B92963
+:10F96000F586709DB174A05D86FED645E81C44BB4B
+:10F970003E2FFC0BD95384716905E86974AF503090
+:10F980005EE66E5120BE5CE7DE5505FCF091D06668
+:10F9900027C4D53C92370C7C2C64FABB8AFE17AB8B
+:10F9A000BF82DEDAC18002FA5EEB31FA353E2E6F9D
+:10F9B000356ED3F3FC5A94379F49DE3609399B4E96
+:10F9C000A6C7CA99885BAB43B95C5FE3CB5927E70D
+:10F9D000C7BFF338EB1F787CFA1DBEAEF7BB0D1E18
+:10F9E000BCBEB2A1009F1FD9E0C5FBB73794E0FDB4
+:10F9F0006F21CE4BEFDFE071DCD73734E1FDA90D8D
+:10FA0000CD78DFCBE3B4428EB7F2F5941AB913E3A5
+:10FA10008B0DDE80DD15234F0D9C6E147DC021857E
+:10FA2000F1E3AFB669FB1590AFD3237A42D05E2CD9
+:10FA30006ECCD9BD8DF2C5F65D12005C693BF4AFAA
+:10FA4000CAF554FE1BEA72AC2BA1BD60BB320BE4BD
+:10FA500031FCAF4A1E3C6FBCD57A779CF6453B899A
+:10FA6000DA37DBB72575463FB854C4D1070241E801
+:10FA7000E7A4814018E82B75AB9E7871E1EEC92BA5
+:10FA8000DD204FAD67036E90A7D6C97B64E6AFB3A8
+:10FA900078B8CAE554942F75EF36E8A1CAE9EEA00C
+:10FAA000CF81DE8E71F4E000E79B28E753C2B24BB2
+:10FAB0004BDC3F9F295EBE458AEFB7265B19AE75CA
+:10FAC000F2F5556A3315D0331051A07F12151BD0B3
+:10FAD0002F4D63710B8737C0EDB2711E4F2B696AD2
+:10FAE00002BBA465106F2D9837ADDF0D722397CC44
+:10FAF0003B0BF32C298CB1DBE0F798FDFFD87B1989
+:10FB0000A7AE604A3A5CCDE5187F352E426DB7321C
+:10FB1000FA1EE3710EC15F8DF3B7D473ECDFC0AE94
+:10FB20003EE665F198C732D8BAEC85921588CB4A83
+:10FB3000B95F60233BB07C3269C7EB66AE67174A9A
+:10FB40004E13D07B59A1B83903E8B18782F47BA763
+:10FB5000C9BE2B9A91DF12E5C972C0D7038AC1DFF3
+:10FB6000904A989DB783BF0E7E0CC72F513F2F4000
+:10FB7000AE00F3AF124F6DB11AFD31711D502C283C
+:10FB80000F2EAB299FEEFF7AFE1DFD5CF927FCC40A
+:10FB9000119C77F8EB04D663443EA128FF8A29DE46
+:10FBA000A466B3751873BD775819DF2BAC1C1F0BF7
+:10FBB0003CE133B79314047EAAD49F4A9246D7936C
+:10FBC000A83D3230739CB8F5466CFF94E262FE04A7
+:10FBD000CF07A26EB964F04FECBA3B76BD7FE47BF1
+:10FBE000B7C5A0A7A3E966FCF9BCE95D401D52B802
+:10FBF0002E1476B884E1C9451E8A27E99F8B3426E6
+:10FC0000A727FD526813CAA96EF0B7EA4A6ACFA2C5
+:10FC10005DA2FE883A87E3744A7F1BD44BEB797D63
+:10FC2000B2F86EC49E58AEDC32BA9EA66A867B4895
+:10FC3000F097F363E3074D545C0A6642BDEC7B5AD0
+:10FC4000B4FB4A3C3AB8DD6A2A7960A1E6847B5D60
+:10FC50007A1AF05E610C3E00BEE6DB8C7C36D9BFC2
+:10FC6000EA5176CF686FE751F9DD4FDBA993D736BC
+:10FC700042C8BBF68915FB5E4572841FE2895BEFC3
+:10FC800071F8E376407F46BC42BC2C8FA32AE8691A
+:10FC900044BE6748249403F41BE998976DF2C3327D
+:10FCA000CCFDD881E37848A1F3081DAF43741C77DD
+:10FCB000A07F1CDF9F127E5E45CE30FA53C2DF2349
+:10FCC000DCDF73D1FF62F158392FEF7FC8A300FE4C
+:10FCD000F5DB4D71E691FC6382FE540531D25BCEBB
+:10FCE000FDBE7293DF27F4FD25612F855FCBEDE12B
+:10FCF0001DC29F2A1F7B7DB9C7944F574D096FBF07
+:10FD0000063D204015AC3791113E19E4AB3BE7FAB4
+:10FD1000F630E5EB1DDE24B6DE42E954843D473E75
+:10FD2000319CBD9097BFC3A3A2FCFB34B67ED138F3
+:10FD30004EDCC257C2D60D4ED925361F04C99B24AE
+:10FD4000263FBCCAC3ECB566928B6C4F5335AC03EF
+:10FD5000698AE40D91D1F25ACDFD39F87E3D6545B1
+:10FD6000753EF5C967C6CB2FEF83D02A29A7343C4F
+:10FD70009B93787C756FA40A86E76AC7979870F69C
+:10FD8000A9C87B98D775A150C2759FEE9C8FD13FB3
+:10FD900010EB3B51FE1DC57C145FC947E8AF8CE4F6
+:10FDA0006DF1FA168AFA4A0EE37ACDF75C87314F85
+:10FDB000E424ACE3D2EF4F2A110DFC90F9025F511D
+:10FDC0008E86053F73204F82D517E67ED529FB1B13
+:10FDD0000EB09B22EFA4CB27D7C58B7356C82CCE71
+:10FDE0002CAE37A96CDE99A3323C27EEC5F88EC83D
+:10FDF000937CBC98F9E1DF318CBBB97E28DF8CF1B4
+:10FE0000C170E158FE68A389CFD3543EEF71BCD1D5
+:10FE100019191BD78A7E9AF960EEA7F93BA7CAE2A7
+:10FE200065F758F59BD5D9D176C47C672EBFC81E1F
+:10FE30003F2FC75F628C4F9AF372EEB1064A55CAE4
+:10FE4000CF2A45DA92EA41BB86FA74E8B28638E6F0
+:10FE500042E4D01618D623C32C3E5A4EE4908DCDE2
+:10FE60000B8DB06E27F446C8BF998EF1DA2F1FEEC6
+:10FE7000477FDC7F29520DF27787AF1BEDEA026ADC
+:10FE80005727C4B1ABF3E4C12D13407FBD6C7FC7CE
+:10FE9000A9DFF755E3BD26613EAC5E9EA74C003955
+:10FEA00070C58F57CDE572327A3D4FD8559702B85D
+:10FEB000C11C6F9BCBF56EAE491E02EA080EBAED6F
+:10FEC0004ADEF8E394481E2E442E3C182F8E2AAEAC
+:10FED0005509C6F73E62E26FA731FE6CAE47C48398
+:10FEE00088DC990DFA2CFC5F73B93695AD7B1C2923
+:10FEF000BA97C4E655097BA096B46B1017EF2D197D
+:10FF00007BBE30E70FFA89314FACCA6E5C8F7D4AF9
+:10FF1000D11F01798CE2A416E6AF96B4A0BFBAB0A7
+:10FF200090EF0B2ABA17FD53E157B7DEBE17F3B9AE
+:10FF300044BE96F04FCD74F74E7E11F379C6A35BA5
+:10FF4000F8F1C76D325B87A07EBB07FD768AFBE2C6
+:10FF50007CF78A8DF1EB578ABE0BF4758B5577B71A
+:10FF6000C03A6391CDFB7C9C7118B031FDEE4DB071
+:10FF7000DEFA0758F8988DFD403E98E71BE1C78AE6
+:10FF80007D4A93DC4C6F1BB81F5B56D882FA98E60B
+:10FF9000A67E2BF0CDCBFC563268F453176A7D5900
+:10FFA00030FEE6F94E1EE67EED55FAAD5B93981CE9
+:10FFB000055CC4EEA6EF93140A4DE9FCF7A45C7946
+:10FFC00018F8B1358DA03F70324D0DED8E136F785E
+:10FFD0009BCB5B8DBCDA206FE51C97A8D5FD1AC4BE
+:10FFE000034E0EB3385EA271DB66C2E9B905C46F79
+:10FFF00073C235E2077ED07BDD86D708E6677FBF18
+:020000021000EC
+:1000000068656EBCFA76B72971E7A53FF3715B2C82
+:10001000F2B5EB583CF2BE4215E3C293EADE3D8AEC
+:1000200072DAC8E574810DFBDD5BA4E0B8F4DE9EF6
+:10003000D30EEB9ABD4576CC47E92EFACDEF215F82
+:10004000BBBC4432E49708F92D075C0DF5DB59BCC5
+:10005000F33E37B3C3BD1AC72F3C6F640D1FD39354
+:10006000FBDE77C6E68D2C1172DFC8E3E426FC4484
+:10007000CD48DC751C91477CBE91C585EF13FDDD35
+:10008000BF770BE85D03979BEE8B2BDDA89FFB5999
+:100090007E5E6B510BC68BBA27BFA5C2FD1AF7193E
+:1000A00015EECDB8428CEB7D25BF62F9917C5CD713
+:1000B000403C9ECAFBCB99375B3DF47E71F8762BB2
+:1000C000C43B457C76D43A145F4FA965DD27B56EF5
+:1000D00086AF8F663A487206F04B0E49C0B7701271
+:1000E0004986FC33B7359444EF1B94FE69805B1C52
+:1000F00026BC78FED77BB341BF8FCCF8408176AF6A
+:100100002B79B715FA31A5642FC6FBB3F6EFED498D
+:10011000A7F52C2C205EDD339A9E1A3E3FDD97C159
+:10012000F285EEF38682B0EFECDC65B69FA2F2D7E3
+:100130006F54C1B4367A5D46278043C4BA8EE2E676
+:10014000EB227C7D825CBE22C58E5B8312B083FD78
+:100150006D2D79C309F42EE67CCBDD27B7807C5763
+:10016000FF7AD657404EC8ED36D774DAE039D76FEC
+:100170009DD76BECFDBDACDEB9015ABEA1706FF628
+:10018000CAA2D1F665447F0AFFB22140E93939FF9E
+:1001900037D980DBDEA076D703ED72BB65F697CC4E
+:1001A000F3AA392FC6DCEF4C65519D6D368CF78F65
+:1001B000DD39317246EDC00AA07FCDD376CCE34A5B
+:1001C000DBFFBA2A837DA3F8BD568ACAD11A2E470F
+:1001D0000D1AB37FAD4524B44902F93BD358067AD2
+:1001E000F72ACB379CB4FF5D963F6A9A1F7AF9BC19
+:1001F00021E6E3DEC9EFA1FE9CDFC7F52568916229
+:10020000E3495A4964298C8BE04FA7C9DEF8ECF129
+:10021000E326EFD8185E2DD7D87B8DDA6F58D73606
+:10022000BFAFE4FE54155C63E685076D0CF78AEBFF
+:1002300035E4213CF55DAAFFDDDB0FB9EF463BA5B8
+:10024000216E5FB37F6F01ACD964EEDB5BCDED0552
+:10025000FA6532EFE724E2413BB550B3B3F50393BF
+:100260009C5B4B7685013E8B791A1C7225336A475D
+:10027000E4D838441C3F8C04F537F363F2BEE8FC45
+:100280004EC0AE54B959FCD52C276925D4EEE020D8
+:1002900050EEC5ACFB9AE5B6410BB8613D9BEACF89
+:1002A00059B6FE49E72B884FC88D5E1C4F2E9F160E
+:1002B000FA1FCC7F0EAF513EAD05AA01AF98E9F809
+:1002C000A9CD88FFC5FC9CE6EE47FA166AEDD9D0A9
+:1002D000FE24773FFA5BD4BE67C355C899B0D723D5
+:1002E000F257745B3DD877906B58223F59322B19E7
+:1002F000EC60839BE114628AA7F7BAC7F6377A4CA1
+:10030000F278D2C5FCAB861292EC4A057D6771A7E4
+:10031000DE47D3773962E272FF640D74D862E2EB94
+:10032000CEC22FD6BB9C606758FE5629355FD6BC1F
+:10033000683C53C44DC57A9F88938E8A671676634E
+:100340007E9755E45DF0F5BF51793F09D61DC5553F
+:10035000C4336D9BDA152F5F2F413CD6C8E370C3C1
+:1003600033C78987B2F803C567BFB54D1C1F9FED22
+:10037000E17EE600180F7A5D6573E155837C144ACF
+:100380006A6F527CDC7690FB6DD7A29FC764F88EB3
+:10039000B5F327937C89E7513CCCF46052C9DE9ECB
+:1003A000583C5CDE467943C7496D23D3486A62B93D
+:1003B0005B3862F77E6590AF117C3C0E2E16F275AD
+:1003C00051D6FF669B98B85C03A723D1FBD6225B6E
+:1003D00033E45BD17264522ABBDE40AF3D33F66634
+:1003E0005BE8F3D7007FC5D0D1FBCC7EECC71F54B0
+:1003F000B6CFA6F7E2CA5CC007A7143DD53EF1EA26
+:10040000E5C7AC4FF6D9BA6723D5BFAE6C3BCECFAC
+:100410005D6E86435E879231F2B44E0D5C679F8DB0
+:10042000104427E9DCC8093907A3597D75FBC4EEE0
+:1004300072F43FD414333F6C875793619D8FC9CDBD
+:10044000236A3FE6E3DC456BB7D1760E6B72E60AB2
+:100450007A3FD3CEE4F170D01A37FF79A69DE1E759
+:10046000756AD34CA093B4AF453D6B91E426D07F21
+:10047000E2BDBAF8DCE68EF879A555D1FAE762FD5F
+:10048000FB68FD801BBC3CFE4E5C9971E3EDBCDF5C
+:100490006142EA405F1E4B33FA9B3E3B9BF7E646C8
+:1004A000EBAF8FAD1FF3B366E3F30538CE2FB0E7A4
+:1004B0000576A617FE3C96D726F828EA5D1AAD6F9A
+:1004C00029D6B79F7D976FE7EB069C6E81F3CDF938
+:1004D0004F35496C3CA2FBFA08DACD528AC3F17C55
+:1004E0008548E830DCFB09DF9729319CDE95C2F6B0
+:1004F00031755987F09C85EE4F3E7E07F66B2A8A50
+:1005000011DFDBB8EC2897F7C850AE34FB8223F636
+:10051000DC8172FEBE7BD8B8AEAA73BC7390F07C4F
+:100520000D5E9F3F419C4BE0F80E5E3EBA0ECCF64E
+:10053000294E1A60FB122B5CFC9C88B46FA35F2DC4
+:10054000F47CEB276B199E9FCAF7AF65EF9163E9C7
+:1005500051383DA5CAFBDFDC0BFD8F1017C659C310
+:10056000BF73E4D07EEBC7646F129436F9193E8EE8
+:100570006BCB396E4D84EF8F4A81E7C22CBE69C0C8
+:10058000F94733FF59061C5A1A66EB4C151CD7570E
+:1005900028A12C981F6AB3593CAAE3625F16E2F9BE
+:1005A0008F3371BEB84ED985FD9EA20C619EC43CAE
+:1005B00013FECF1A20E837F8A9DFA0C7C12D357286
+:1005C0007635ECCF2DF5B0FDB5A55E56BE8BB61FCA
+:1005D000A4E52B2FFEA007E0FA687C6FC429E59EF6
+:1005E000A12A342326DC7FCD783A9BC5A52A4C7EF0
+:1005F000829007CA0FDC37DFA13C68073EE4665BE8
+:10060000987F30D5B21CF846ACCC3FD8EAFA961D9C
+:10061000FD03FA1EFC830AEE1F545C8E64817F602A
+:10062000EE8F90AFDCCB1FA37FD03DF431F239FCCD
+:10063000C99E2CB0CB228F5CE07A513E53F11F0152
+:100640003D2E37E17C9BC0F9C36B09E0FC0AC588ED
+:10065000F36D5CCE2A38CEEF80F52E90D7B399C7D4
+:1006600073683F0E0A9C3FEC32E0FC52CE8783A0B9
+:100670008F3138FFE059B6AFB22B3BD780F347FC40
+:10068000C84F89F37D49CCEE081C5FCBF18278FF1F
+:1006900021B7E3667C6F7E7FADF89E70FC1EC5C5FA
+:1006A00046B9EDDE9E8BEB2AA52E3BCA6DF9406064
+:1006B000F801FA2A7378ED1F9F007EBB1D5EF8CC0F
+:1006C000C6C765DCFC4F13DE9F44228753416FF29F
+:1006D00059BE515AB60BF5A482EA496D3C7D30E310
+:1006E000FF6C366E554A8BC88B1B13E757682EC4B8
+:1006F000D98A527B5538DFAC5775F9B631FDD2AC8B
+:1007000024230EF30BBBA93C1044BBA93C1006FDEF
+:10071000F15F66F933DD9F7CDB1D7B9EC3566EFF68
+:10072000853D17FA78F0938F791E8D49AE958F1C11
+:10073000B1FB8A0F66331CF2332582FA7BF0F2CCD0
+:10074000E4D8389519E71FE438BF82E3FC8ACB4C24
+:100750004F0E8EC6F9B725C5E036E7E56588F3AFDD
+:10076000369F40F8AFB526FFF55DBBD17F4D24D74E
+:10077000FFC1E7F3283F8736239E5586D87CCAF908
+:10078000A9703C6B031C790BCEA3B83F5EE8F1283F
+:10079000BE5A3F32CC937E8EEF0E2A578D679B93C5
+:1007A00066272E57310E9EDDFA89DA8CFCE778B683
+:1007B00042E0D9BF45B262F12CD1180E3BF8CC25EE
+:1007C000ECC7C1348663CD382C31EE60F77E4DE244
+:1007D000EB30463C21EAE94821D9189F93DE46BE1A
+:1007E0007559FF12178F08FC61C61DC4843746EA8D
+:1007F000059C027860F88203F6C1761C93F9BEBAB4
+:10080000CF8A4322722CEE10DF75A5E8E8CF0B5C8F
+:10081000B2F593338833B60E113C3941E0128A3772
+:100820000E833FA7D3F93BC913A55FE01381374679
+:10083000FAA1B0BCD12E17B7FF09E2A09F373E1135
+:10084000B8C4CC9F8356865B3A2EBEF599F08A19C0
+:100850009F98E99DB76B474F2A2D373F7F08ED5092
+:1008600087B70FF799770DE766001FC6C72D7E5C27
+:10087000871F895372FC71ADB825115E4984330E10
+:10088000028ED1A238C68C5FCCFCCCCD262D10F7C1
+:1008900017B82691DE42B97B9D51BC93A81CB5DBED
+:1008A000888312D6733972AD38E84CD298388810E4
+:1008B00026372C3F28113ED9EA7569B1F9AA623E64
+:1008C000E9CEBEF00EEE2B1F50F17C84EEB3CC7E51
+:1008D00026C247874C7A7710EC85169DAF12F265D9
+:1008E000809DF3217054A272578B9FC43CE24B62EF
+:1008F000F344A2F5C9AC6486B31EC965FEB2F97DA6
+:1009000034DFC488A3484611CAF3FD7CDF65225C4E
+:100910004548C4C9E254417CBE8CFB9B181B9CC358
+:10092000F30D28A94DF9241FE685263B1BAF93B391
+:1009300025F40316C1732A4FFE6AB63E74BA88D9ED
+:10094000EB937E1BDAEFE3E7593E62770A8BB39EA7
+:10095000BC35C9BB9B92701EEAA5F3F0E9A4BE6248
+:1009600098F767887EA6B37E2E708457E3FAF8ACBA
+:100970009B2DC19CD1FAFD4832A7235DC375B606F5
+:100980008E3F619D306BE6E8FD04CF24E7209F2079
+:100990004F3E8B96DB62E9FB7E2E7D946461EBAA71
+:1009A00066BEFE99D3038CB1C5F0A131DFAE2751ED
+:1009B000F94FBA89AD4F7555DB301F270996D269BB
+:1009C000BDDB0A7253E2C991E897F9F94F9399FF99
+:1009D0007D7A6A04E7B1533CBF778D22050973B075
+:1009E000B09FCA8429BBB6D1A25F4E66E7D59CFAF8
+:1009F000F5EB18273A91C6F9A04B98C770126C21F5
+:100A0000C4FB5C5A08F665D2EFADCBC6C8FBE8F371
+:100A1000D716B0F53242245847833F7247F37B49DB
+:100A20009D8CFD5EE2DAFE00E8E3E9BA371C70FE59
+:100A3000E4C2610B01BD5BE22ABD179E77A7303986
+:100A4000063E036E5A52FDC56FC2F3C646E3781CDC
+:100A500049CE65E7C8286C3C60FCB2668E6E97CEC6
+:100A60007E01353386FFBEDFFC9D1433AF88BC1595
+:100A70007B823CBE44FD9662EDAF1C8D3B4E2AD975
+:100A8000B503F6C73415B3732F1A3C2408EBBC0D1D
+:100A90005E12CEE1F285F9343DF96C5F10D7AFB448
+:100AA000925D6DB910A71C56D8FAB3693E29A363AD
+:100AB000959D0E7173363E2767CBE8D79595305CD0
+:100AC0005FC6717D83DE82EB7A8D8FF66CCF85F702
+:100AD00072768DDFC3D74763F847F6B338DC2293CD
+:100AE0009CA798E2FC655E537E20CFEBEB2A78CE84
+:100AF00005F2F3483A979F9912EAD1EB92E7D1DCDD
+:100B000098F9A83E59E41F118F35463E46E4818F7F
+:100B1000AF99EF89F869E693592ECCFC3E9962E2D1
+:100B20005702FE27E2775989FFBF94BFE7AC362B07
+:100B3000C86DB7F5836CEE0F1139C69E98F9764EE5
+:100B4000F3A4809D383DCCE69B13533D5FC173B049
+:100B5000A81EE3399E5C1FA2E340F5C119ABCF6F1D
+:100B60004F037DA67266857A1A75494F02FDDBB781
+:100B7000F501EC37E8A933AA4766FE8FD23FFABFEA
+:100B800022E8CD1BAD47E6BCB14FAB7FDF017B0E4A
+:100B9000F182640FF24FD8D346E2FA4AEC3E56B1E6
+:100BA0009EDE9DD3DA04FBCF1B062C78DE4FC7F008
+:100BB0008BCA0AD8D75A27E1B4A6913EA4576B63D3
+:100BC0007911D73FFB3081BCF547A7122FD82BAD49
+:100BD0008DE549D0F798272170BD38BF91BED75910
+:100BE0005E88F19CA514AF31CF67F16025AE2FF47C
+:100BF000F0738F46FC0B22E4D2B8BFA5159E4C8E35
+:100C0000EE876ABB18C2F84C4782FD2EE26AF617DF
+:100C1000CCD723877EF1CDBD905F91AFBA005294BF
+:100C20000F87ED50DFF70B0FD5613E5B9DE48275BA
+:100C3000B7231FB76F86F38E1617BE1737BFE7C0EF
+:100C4000B9A7BCD08F03D61DDE74B00F9BD8BC955E
+:100C50007443E1D41563E0A3409DBF2E6746E27C58
+:100C600092D50E1EF7EFFEFAEE47607D7B50F582BF
+:100C7000FF52CFFD8E066547F30A3A9E3DF325EFFE
+:100C800046FABCE7C627D61E8238EB5915384E7A8D
+:100C90002FEEC9063FE3B567ECE87F1EF978CF4F2A
+:100CA000309F64509D03FD1DA17FBAC6DE9F7FE982
+:100CB00018D899C5058B8BA19D2485EC0079BA6E57
+:100CC000B8FD1D3817A161409D0DF66771DD2EFB43
+:100CD000D7804F75BFB24F07FF63D85303E3999D89
+:100CE0001CD01D541EB30A73BE9701ED7889574777
+:100CF000BEF611E0ABC84310B85EF8931DF3735213
+:100D0000480C5F4F0FE7A6603CB28EE72BCC979B59
+:100D1000C03F3EED9A9E8271C83A96A760E6D762C0
+:100D2000C0E9A9405FCED49571E6EFDCBABF6C088C
+:100D300040DCF7465B733C7E0738BF93FEBC7237DE
+:100D4000F437E9C77617C0EBA4047998790E1E8FA3
+:100D5000735F5D7C44E019CA57BB3526EE47F1FE50
+:100D6000D71C3171976B6DFF4EC8D99E0D718AC02B
+:100D7000FD504F198F8F94F3F84822BA4AC7895B08
+:100D80005039423E2D86B8C52DEC7A03BDF6D4E726
+:100D90004C35C42D88EE063B7B1AD6E1008F298B9B
+:100DA0003638601DEE1C8B5F2492DFC5F97BEE3C6C
+:100DB0001463EF7AAD7A36F8B93D37BE8D7ED2FF37
+:100DC0002EF91D91B3BA5FB5C1F959DB0A174F046B
+:100DD000FB1723C7CF00FDD72AC766FE75CCCF4BC4
+:100DE000215A549E851C8F964B09FD5121DF89C6DF
+:100DF00003CA813F2AE43C51B9D3F36F882BFFD15A
+:100E00007A86C6D4832F38187E0938D8FC524E749F
+:100E100017D8E17959EFA0DFFA0AB7C7237292D247
+:100E200077E7FDD4EE049FB7E37A79D74515CF591C
+:100E3000EF7A6ED5CF60DEE819AE749DC179DCEF34
+:100E40005A42E9BA11FC87421C9F1E25264EF827FC
+:100E500087F01F8C79BDFFE2FA63BA9FCDB39A9FEA
+:100E6000F2FB163E4FDC94F35C32CCE7B7F07D1317
+:100E7000333AD5B8F3328710A430E3750B40FFC284
+:100E80007DC672DAC83EF4760BAC03DEF482E93D2F
+:100E9000DF3F6DCE83FCBDC3B4CFC934DFDA2F8E04
+:100EA000EDF7FE12E6270A255EE079BEFFC2CF0D00
+:100EB0006CE7E706BE08FB59E9751FEC67A5CF5F35
+:100EC00082FDACF47E3FDFCF4AB2AFEE7C7871AEEC
+:100ED00093CAF9D036396488878A7DDE1D706E1218
+:100EE000E001B7CACE9B7351B405F9281C2F5A1CD8
+:100EF0003EBB4AC755FD13C17C946F9DED4379D825
+:100F0000CEE759338E11E73A9AE952A37C54204E2A
+:100F1000D53535D0DC54C8070CE466F6A45DDB6239
+:100F2000F0B4A631B968E57E5BF022093D2F45CBD0
+:100F30009FB848F66C6371B6A00CB803FEA2225CA1
+:100F40003F4010C7D5176F45FF0B7020E0323C675C
+:100F50002C17F6A5BE8478AE7E78CEBD0CB7E8A37C
+:100F600070DC08DF64E413C3E7C5AFE3F9CCF50335
+:100F7000F1E52D9AC7D4DC931FB3FFA07138D0C818
+:100F8000F1912BF67C04D52457E67AD28A251C975A
+:100F900005053CDEC3D73FC4786E5EDB87F91EBD16
+:100FA000C5360FC417CC38D18CF3D562B65F4CB9B7
+:100FB0009DED5BADBF48303F1E0526337A0E9BCAC0
+:100FC000F3793B5C012FC4311BBC26DCCBCF912ACB
+:100FD0002F30E27933DE57075413DE0FB2F9701366
+:100FE0001BCF93E709FA51CFEF64F181036E0F93A2
+:100FF0003F1242BFA7C26DB9759B07D6A9D83ECC98
+:10100000D26182F192D2010FEEABAE1824E1EB6710
+:10101000E079C36D789E90897F1510EA4D877A3C00
+:101020003D13219EA7902D708E4CA6BD45073D50C7
+:10103000DD6B71DF0DE4314C6072648FE5AF9A7C3B
+:101040007C33A840058FAB89DFA79864DF8B7210D3
+:10105000337E63AE87A95CEEC4FA969FD7EF1F6418
+:10106000796D663948B30F613CBE7258C3F39ECDAB
+:10107000E36E1ED74A2DF2FEE3B03FE362B2771370
+:101080008CB39D8DB3184755EE94611F0751D878E6
+:1010900089F52F73FCB5CCB43FCE4C97381761BDA2
+:1010A00066DA2FC6717C25A7AE2D69AFE17CDA4ADE
+:1010B0006E6746E66D7B1E5FC762E7991E181C7B54
+:1010C0001DEB808B9DEF475C8BC7B17B9B98FFCD61
+:1010D000CF11282B21C98073CA060993AF472D2150
+:1010E000474E6CF99061FFB87370593D9EC7E87226
+:1010F00055439CAD8CB0F54A7D80E0FAA54EF6CA0A
+:1011000081987E89751095C7C55489F54BF0C94CF7
+:10111000DF5DC3467FE82B41E3BE873B1F36EED33E
+:10112000F8D2DA2CC3FBDA557986F7359E9B0DF79A
+:101130005F741BCF09FA42C0784ED092E62A43F979
+:10114000454DC67382EEA8339E13D4A0DF69D25FEB
+:10115000DD20DF5D52DF0FA1FF16C7EFF3C68A0760
+:10116000978FB76E1C64E706A11F1867BF8B795F66
+:10117000DB079AC00B463DE809FAD9B93A039E9DB0
+:101180007E7A7F8878157470F9F941358495AB7152
+:10119000B3F596EA8CF8FEBCB083E6F50A71FE5F03
+:1011A000D9601FCA41B9E9BCBF52F7BCB8E779BEE4
+:1011B000A771BC20CEBF4870CEC5A8F9FB6AFBC79B
+:1011C000D799C6ED1F6FB794F41D76E624EEDFD5F0
+:1011D000F66B248F0BCE1DA4FCE8834793D97B8D3F
+:1011E000EADB96B4023CE722C35E29A54C8CC63BE1
+:1011F000893EEBAAF2CEBA791C9FE84BAEEADCD26C
+:101200000CBB87E9BFCEF0D116490FC13979E6751D
+:101210005395CFA79322ECBC0B1F3FEF22690BD154
+:101220000B298B829504D7F183B9F6D06609F2C6F3
+:10123000D97ED2D61B2D38FFB40EE93BE0772DDAEC
+:101240006E54703F638DAC6179359BCD4F3EC8B114
+:10125000877C89D7F466C3391DEE4D2ED013F52750
+:10126000EC7DA2FE744E569BE3F90BC5294CEE4F64
+:10127000294D8529281FBA9BAD4784F0DC33917F27
+:101280009B28EF96024717DA6D22F0011BBFEFC1D2
+:101290007A4A1CFDF5A730BFD8572885AC9047BACD
+:1012A0009484AC63F8959D6E4BDC78C64D29DC5F69
+:1012B000BE7C05CFB353C5F97A59EC7CBD6ED3B96A
+:1012C0009537F17E1E4AB1E3B53B670FDBA76A3A5B
+:1012D0001FBDDEB392C4E25971CE8F1A790FE34C71
+:1012E00027C7395F44AC3F6DE7FB97AB2E5A9AE2B4
+:1012F000D1FF618A82743CAF59E3F6EF5B9CDECE8E
+:10130000695E3C57B5F5490B9EA3EF73B74EC1FD1F
+:10131000DD295F232CDEC5E8AFE77AEA73873693D1
+:10132000145CA77E1A7E27442DB1412C8F9CBCB142
+:1013300005CF85DD0E797339D1FEA58875EB9D87C4
+:10134000EAF28AD9F9F310EFA91D6079E50B4B7623
+:10135000F13C927EDCAF68FE9D92D2BA800EF3F231
+:10136000C2C6F066C43F5E8F1F7FB7847837E2EF56
+:10137000A88CDA57A921EEEA1C6672DFF9736F3781
+:10138000FE0E885BE046BDB126337A3E58F9D0A107
+:101390002DB004633E1FCC7CBE90F0CB5413AE1432
+:1013A000FE5803091D56A4D171E644FED863291CDA
+:1013B0008FDC48FD313AFE77D9583EAD6FBD5402FF
+:1013C0004E63D27A6932D8AF1FF1717AB33C80E7AD
+:1013D000B4B426D8677769A45C18F73375E604DCE3
+:1013E000DE31CADF9422B37D7997D9F91EAA9DE533
+:1013F000718D5C79FE8B90EB594E1B962F7132BD2F
+:10140000A8B8F242D658F367A92F40A03FD4BEC473
+:10141000CD0F7B3185ED4754C3EC9C0AB5EDBDEA99
+:1014200078FA2CF4709DDAB40FECC716696D2809B0
+:10143000EDC0D59F5F798BFCD9EDCD654D3F9C42CA
+:10144000FBFF9AF5471ED08FCD01E3EF4B89EB6B85
+:101450005AC08EFC771F7280BF793E39701CE886B7
+:101460007837EC23EC8CBC68477B6AE2BBB99EB54D
+:101470004EC677D5C3DE937FD33D8B63E224754E92
+:1014800089CF1FFA5B40D74CABFE36B4F34865FCFE
+:1014900075C84CA5F21D785FA935FD01AE9D91DDA3
+:1014A000183F4E4ED6FF077C5FAEE8FF0ECFFFC958
+:1014B000AAF7333B5DED3A5310DDD790689C61E1AC
+:1014C000E24C412CBF3E1B9F33EC4D436C9CF5809E
+:1014D000768DE3ECA4D72FC1DC429FF797C75F6FEF
+:1014E000FF119727AA6798AF20F6BDF8DC448F3725
+:1014F0007F89F274FC6527E6B5079B20AFF3E414FF
+:101500000BD91D63E7C47905AD11E6175E7848DA9B
+:10151000CDFC4282F73FFF7ACE6E58DF5D3A8DEB0D
+:1015200031DF7771F743C6FDD0A2DD39A97CFCC756
+:10153000D1CF365E6E732AD3CF1FA4B278D855EBC5
+:101540006706AB47E8A9AAB0EB5D2E265FEFA7B20E
+:10155000AB2D4D12F9EBD3810F540FFB53AE6D7CC5
+:101560009E5A92F7D9E543E883EA35E6E76DE3FA58
+:1015700022EC15A5B3D4C9EC4520F9DAE8CC2CFD52
+:101580001CE458EC3F901D92211EBEC0C9E3955C3F
+:101590007F4F29FA42A093EAEF1D285F89F57789EA
+:1015A00093E9EF179C46FD5DE664FAFB4527D3DF20
+:1015B00066E767D0DF0FB8FEF8791C9F1C37DA1D8D
+:1015C0008A8BEF81FAEB1589EFE7267F9462FC8F17
+:1015D000FA8100D1D964F95C2C6EA0F855C7FD1BC7
+:1015E0006F1AEB7B8B8F17B563F743BD6F41FBB46D
+:1015F0003F9BFF3BE31FF0F1C5387A29F828DB5AFF
+:10160000DCB0FF35D13CB7C0C9E619BF8DEDAF20C6
+:10161000C768FB4586FE7C17F837D29F20F5ECE2C1
+:10162000F72718B73F7DC6FA62FAF308D42BFA53AE
+:1016300071E5F898FAE813FAE80ACB306FFB94F8F2
+:10164000F342AF93CDDB1F3AF427A17EB37C89EB45
+:101650003F727D48B40FE69452F98FC0EF5285D99E
+:1016600041A285FBE598FE9516B4887E072CB171E2
+:10167000B681F876F217CE11FBF00B94BF9D6CDFAC
+:101680000E95EB5FC2FD5D135CCB709FD747CC6EB0
+:10169000BEF5C97A6B1A6DA739E389EFC1F51D67ED
+:1016A0001AD2DB3294EB8461E82F67FB1F5B27B310
+:1016B00073D35A25E3F969EFF0F66EE2F6E91AF40E
+:1016C000FBAD5CF9D3EBC767B50B943F2784FD4CAA
+:1016D000CABB36BB34FB73687FE93482F8B87597B0
+:1016E0008AE76C09BDB90BC6969D77A0431EC55706
+:1016F000E9BD85DE0F81D30DF62A9B10F74C2C1720
+:1017000054F13C04FD3F983DD2CFC095DAA10FB80B
+:101710001D1A802BB543673F8B1D3AEC6476A88D6C
+:10172000CA501FC8A11262F9BDDC9FAAE77D2D2D0A
+:10173000386C88DB097FAA7360B71684BCC102B617
+:101740001F3551BB61F037207125C1EF5689ABFFC2
+:10175000C91576700236535C077154F13B7A9DD0FF
+:10176000BE06ED59F0777E5E2332AEC39BEB6B9DD8
+:10177000CAE7FD142ECF9357A27F65FE1DBD2A77C1
+:1017800068FB4C5A8FEFD8DD6C9FD5E5BBC9B22200
+:10179000C0270102E76DAAF40AF99B82EE69A9D776
+:1017A00093D8DF235689A4CC2B8CDA91AA08095749
+:1017B0001423BEC1FD5C508F87D7132882F93E4D9C
+:1017C00081F5BED712FC1ED39372607A6A4CFD7EFF
+:1017D00062C42B74FCAF4F9D8DE37F0394A3E35F42
+:1017E00090CAE6A11BE1F95927B37F4FCA4D85F096
+:1017F0003C90C196A069F9225E7E46EAE720279BCD
+:1018000009FBFD5D90DFD8F5EADDDC3E744C0C94FD
+:10181000433BD53F5FD433857EB2BABD05CF39AEE9
+:10182000B82EF2D129C8BFCD52713DB0F551E33C7D
+:10183000F21CFFFE40AA88DF5D1B8EA0F6AF3E15AE
+:10184000E963F62FE866BF33DA3239F731061FA9AC
+:101850008399193DBFB6DAB508CFE7FAC60B39331D
+:10186000E1BC2B95DBE779EE6E75058C6BA43F6EC2
+:10187000BEE95746EC20B5DE86792AFE392FF7A758
+:10188000325C4BF5F8AB7CFCEE023A5F9CA8075249
+:1018900067FFD7D9476187020AB337D46F0A82DF5F
+:1018A000B4ECD2DA23304D3593276A607D83CAE5E4
+:1018B000DF019D5FB6EF3DC27E7A303805DAA5F2D2
+:1018C000F8702AB3477F9FCAECD17752993DFA87C7
+:1018D000CF2267F7A69231F1A7C0E1027F533BBF49
+:1018E0002D95E14F8FF3F3993776F2FA02CE6B9C88
+:1018F00037BEF439B44FF1C6CF505F391F12E1DB68
+:101900005F70B9FA65AA88FBE9BF04FE2FB4EBFF4C
+:101910009C1A8B370A8FFD11F2E4A278A35BE6785C
+:1019200043898D67FB28FEE27975F758E644F54454
+:101930008DC4C721F353477048078EF7768643E678
+:101940008FD0ED1D08811E4EE1FAFE3B668F5BD401
+:10195000FE7BF01CDC7446B794CEC6F128EFC7BB03
+:10196000524ADCF8E6B1687BC7B0BDF5AC3DD97131
+:101970002BFBDD0F6157AC12B623E2C3F3D3D9774B
+:10198000A29D79FC2A70AAB99DDF46DBF92DB6F33A
+:1019900090D807ACBF05F7BE285FC3B17C05FB62DA
+:1019A0009913C34F8EEB12E1B818FEBD8776A08D58
+:1019B000B533C2BF407C3BBBCC250B3919481D4316
+:1019C0003ECE71F9381F958FF35C3E3E4C457CC28C
+:1019D000C6E1AE09C6FDE5C35CAF1EE17C12E3655E
+:1019E000A6BF95BF1FE187E7D873B1B8D65790B6A9
+:1019F000AC19E2966DB2D7E2192D6FF45F3EE0DDCF
+:101A0000FF05CC52B1EF0080000000001F8B0800E2
+:101A100000000000000BE57D0B6014D5B9F0999D26
+:101A2000D9D94DB29B4CDE1B48C226800D1A7009D5
+:101A30002106083A79F20A10111014617985F04AEA
+:101A40002262EBF36731213CD5E8556B5BB40B8226
+:101A5000628B3660AA8801372088EFD02A68F5B6F5
+:101A600041ACA0225950EBDADAF29FEF3B67B23378
+:101A70009B5DC0DAF67AFF3FDEDEC339739EDFFB83
+:101A8000FBCE37B34584FDC927BD923B9790B17E0D
+:101A9000A27A6D849C83BFAB82A555110849266448
+:101AA000995C655586D20165F5CEAA8184B4977498
+:101AB0002EA90AD3FFB604DA9FF69B9EBEA92CD9A5
+:101AC00049FB7B687B0A21C31DF4DF2221D7D5B4F3
+:101AD0008B6EDDB8E99F7E3C4F0D33CF4F124CB873
+:101AE0006EC30CD721673E9DC661726D253DFB35E7
+:101AF000C7CBB8DEA86CAF1447FBBD7986289B69BD
+:101B0000BFEB260BAA979EAB829FCB96C0CE91A52A
+:101B100048D85FE5FB1C2577CE0B778E7CFE7CB426
+:101B200093A82D749ED10A517786E95708FB8479D2
+:101B3000A2C3CF338DCF3386B079429FCFE0FB1A5B
+:101B400055127EFC083EFF34C78EF20402FBD964B6
+:101B500006F8E599D5610A1DB736021E52A4929186
+:101B600080AF280A3A731E2133E958139D6016E0AE
+:101B70009C960F8AEE5278EEA6E070E40125787A02
+:101B8000015E4B6C6A19B44747ABE530FF4849AD7D
+:101B900080F297667514E29FF80829206402A79FD7
+:101BA00009569B4F8CA5FF28349FEAB4B2B673D96F
+:101BB000F0FF67281F5F4688407CC2B9CBA0EE15B6
+:101BC00061FEE1CE43EF0AB4FF706DDC4929645C2D
+:101BD000BAF2710CAF8BB82F84CF6EF34F9D365392
+:101BE000CF736AE56E9BDB0A70381DED9E09FB6CB6
+:101BF000706CB63929BC5F75B7585DB4FD641C4183
+:101C00003876C5A86E7CBE9BD4B4D0763146A86F1A
+:101C1000D1C16FBEC2E05DAD30BCBD25A9D570FE9F
+:101C2000095675018C9B9C49F144E79D95D8B95C98
+:101C30000FF77A8EA7859C6E67CAAC5FE83EABF95A
+:101C4000F32249F0C4C09E6C873E12813F48F75F83
+:101C50003F13AD8F857F51FE293AA94C9D96447163
+:101C6000B6467499685DCE11C2F2E99D7CBF944F6F
+:101C7000EF84FD1227E5533BA50F393C7D7CC5FB66
+:101C80009747A0CB3C7E9E32781E66FCA59CAECBCF
+:101C900092DA4542C717717E0BED373741C47E0D8E
+:101CA0002E323ADC3C0F04E5CB03485F0ADB779E1B
+:101CB000B9EA21A8CF500E97C7D3E6E2BB93A6920C
+:101CC0002480878958B2104E5642E1247138D16D74
+:101CD00012A82FB3B2BA14BD84C4D132D3E15D3F90
+:101CE00008E0D768763969FDC3931F8A84D2D9D6B4
+:101CF00007CE0A84CA8BDD7E4212B3601E19668449
+:101D00003FD339A1E77CF49953D2D6A3A0B9F224EA
+:101D1000512D947EAF2CF44F22B186F1E41C9DCF5F
+:101D2000E6EFF008803F2BF1C45C8E64FC76BF14B4
+:101D30009C15E74BA5EBC279E42F8917CEA33ADCBB
+:101D400095641021F1FECE5FD461BBCD350ACF453D
+:101D50006CC06FC1732E43FED3F625DB3A1FBB97D1
+:101D6000F66FFB2ADA75179CDB5FF109DB0FF1D800
+:101D700081AFC54A17C877422CB83F13FD0FF86CE6
+:101D80006480EE3787EF1716C9D7ED9FF43CCF83F9
+:101D900062D521C0C72C2B5163F3503EBC02F5BE67
+:101DA00066DA81C2B14911BC1EDAAFE981796BB242
+:101DB000405E6F905CFD09D039D925503A1F41D75C
+:101DC000BD85CA1DB990D8145A971DECFC4D7727D4
+:101DD0006D8A11E0B94465212DFDBE6F040A875854
+:101DE0004775A542CF21F3F102051C8C179C0A9977
+:101DF000910774DB2112940F0E8487C63FEA8F8807
+:101E0000F0B115550D01FA2A9388C74AFB0B0E361F
+:101E1000EF95C42F92BE8007AA086859425C58DE2D
+:101E20002BBA3F06BEB1CA14AF74FF5693D5BB524E
+:101E300000FC55BD3E1AE15EA67C9C13946791E4BC
+:101E40001040EE630DAEE2F7977BE5CBC3F3D5DF31
+:101E5000827CF3372697995E9E9CCDE4CE017BE78A
+:101E60000C3DDFAF5298DC59C5C71189F1D9325901
+:101E700035C59F87CFD7F2719782F2017D4CC2F3AF
+:101E8000714B3C930793EFF236F5A2F09B9020B88C
+:101E9000400F976F9F2DF57606FBA5727DA7A4A82E
+:101EA000F1F130DF6ED7496F12681F19F57BD37BD4
+:101EB000641ACC3F9BCBCF009FF72FF16C1FE9BC7E
+:101EC0007E4CB04F0B0797CCF86EB864C2B9889BB4
+:101ED000C1458C19ECF7D175486FBE8E59C075DAC3
+:101EE000B3997CCCE6FBD2D6E9C3E51F95FB97C03E
+:101EF0003E27677AD3A1DFAB66B6BFD0750706D79A
+:101F00001D88EB2E61EB8E05390FFCEF3CF412C8F7
+:101F1000F9224EA763FD6E02760FF0B0A92028EFDC
+:101F200065A74FACA7ED4511E4FCF0E03AC3719D05
+:101F30007A86C73D29EA08D827B50B8AA0BD3D5B44
+:101F40004179F9662F13D94CF972765AF63D20364D
+:101F5000B57976F273B6673539E6507CC97EE2B260
+:101F6000209DD7A0DC2BE2F2A561B79BC0734F2F59
+:101F70002A3375E365FF1C2BB1E151FE714EEB4F27
+:101F8000F9A8C99F1DE70E8317AD5CBF828922E2C5
+:101F90005C8AE396F171A1FD6C0FEE8B81F93740FD
+:101FA000FF1F113291EB1B7A60DCDF58CE3B0DFE38
+:101FB000CD319DB4DFEE9CB986FDE073CA474D3943
+:101FC0008FC580BDD49641F500C8A9574494934D60
+:101FD0007686C7A6B46AA2B7474B1D3EF16398E761
+:101FE000DBB9642AC55F91C34D2EA1F05DC7F751DF
+:101FF000E4AAF60849D8FE6C149D6779FC250847C9
+:1020000039C74D2A72012E5E524DC7CB8A4F74D10B
+:102010007AA99FF8AECA87FE54CE0B6C3EA75D3FEF
+:102020000F698179E45C460FB2BF8500FC769F3C66
+:102030003F1C63724C06F9ADF125B5EB56001D94BB
+:10204000295797C5D3F9176DCFCA13E9FC158E76BA
+:10205000794E2ECA6D0FD0C7CE647565FCFFA03DCA
+:10206000378D78CD80F751994C0F4CA815BC9B2922
+:102070007C9A42EC849FC6333E2C0CCABB9FE1BEC7
+:102080000B353B41FD39D4CF63073F0AF0388F1D34
+:10209000BC059E87B183B7423B85D7E3F1CC0E7E6A
+:1020A00002D6A176F0B6EF03B7090A93A3D40EDDEA
+:1020B00001F3C6837103F6D11F983D1ABAFFDBF80E
+:1020C000F9D7D0B376005D4A5E89D139E3D3E19C7C
+:1020D0004FC79EA4FC92DB93FEDB28FD7B28FD9D71
+:1020E000A576939815999E7C17C997C50F32BE6F38
+:1020F00070EC43BE7B91F3451B5FBF2D47AC047C66
+:10210000BE4A4445147ACED794E176805C0FE53F11
+:10211000F55B233D973ABC1BF2806F0ECD75C1B6BF
+:1021200042F951A665F5C0E0BE8F031F0ED5C92741
+:102130002248C88F17E04398C73D10EC8C7849CDF2
+:10214000053E62EB7A0E89A82722F111A59B5380E8
+:10215000BF6EB800B075FBA774F3393CA77C76FA64
+:10216000FBD0CB1A4E1FD40FF91AE6EB1FCFE8674E
+:102170007604FFE21FF1DD7EC03FA03F99C1F4501D
+:1021800066BC938D234932E81755CCC804F942E761
+:102190003525D0F6B7B87F1469DEA8846EFE8B4A69
+:1021A00080F3DCC2E63D0446F6D09EF38E4AA0F6EC
+:1021B000479879D2B81CBF2E82BF90C5FD1292DB22
+:1021C0006D9FA4C07A599C6F7627AB8E041DDF14D7
+:1021D00071BBE565C1A89773BAFD7DC63F4909ACDF
+:1021E0003F99D73D6F56820E9E9A1D309BCB076D4F
+:1021F0009EFE9CFF9C090A1B5FC3C6C7439D8EAB16
+:10220000E0FE13854B2ECC47ACECF985FCA27B1489
+:1022100019C7CFE5FB12E2154DBF215C4747F2BB62
+:1022200082727038E2C1C5FA5FAA100DEF23711FE8
+:10223000956C1F850AC37B68FC20127E34F8276BDF
+:10224000E7CD61F3134F37DC46EBE92512DCDE8A7C
+:1022500063F6C5280E27D2C8E7099107774B1D56AC
+:1022600025CC39AF8D771AF8D9EE32CA8748F19468
+:10227000BC207C66221CF2D9BE23C5570AF87947D8
+:1022800070FB968E9B8F70B5B1FDDEA374B7D7E05F
+:102290007CE96CBEFA20BC1763BB83F58FE4F7D7EB
+:1022A000F37D5527748F5B86EB24B171A1F104ADEA
+:1022B0005CC2F7B73038EE565CAF1F1B971CDCC70B
+:1022C0001DD83E9AB57FDFF85B32DFEF4F82EBAE71
+:1022D000C1FDAAECFC81B86EB8ACC7F622B66E247C
+:1022E000F9118863E768E270BE12FC623A477C80AD
+:1022F000E44849E03545BB46D12EA901D507FAA3EC
+:10230000E44BD90972BA5CB479042A8F25A715FD6C
+:10231000E42889A8E0D7B67FF56347672ED67DA06D
+:10232000D75747155BC1EF5C9325B9401F16DF27D0
+:1023300031FFFA9409E57D85B804E7D9A76876EE00
+:102340008D063FDAA9382BA3601F56913899FF5F9D
+:10235000399E3EBF8ACBEB7DD64413CC372283C552
+:102360000BAE7256A3BF4EBE657EB44AFF63F25BEE
+:1023700045BD2CF371527A3D11B034FADB32D9707D
+:10238000461C847A01EDA8117EA3FF2D3B2B4EC085
+:10239000FC32D18DA3EB3E9F604F427BAA1FE97FA9
+:1023A0008EF28F25472016EA5F944BEE3D808731F1
+:1023B000CE6AA5849EC792EEB6821CEE67F6F586BD
+:1023C000784263BAECF2001B3E5066CD027FAB99B7
+:1023D000FAE7080735E1EA81413C598A540274481A
+:1023E0007182FCD55DDA589990C8F0F8498205CB26
+:1023F000125ED79E87E27D486234E37F62F57C946B
+:102400000372422071940E9792CE4CA0C7E43426FA
+:102410009F6A4D9D2950EF22FE94245A36344BA3D7
+:10242000C3F93F1B79FC6CAD29BCBDF44BF3980F8D
+:10243000000E12C40D2EC7B880DBD237183FD0EC87
+:10244000552D8E10C96EBD57ACFA18E61114DF3742
+:10245000D0BFA7FDEBC17D48E94C4E6BA5B68F9967
+:10246000898C7F1C895684CFDE3B4AC91C27E2E950
+:102470002CF029C5D3A12B002A59F314C0D32B5912
+:102480000FF583B89435EB8124E0CFD184D9A7E54B
+:10249000748C83960FD9DCDF24E8E4E1987EB3D115
+:1024A0006E2ACAAC477B6A7504BFF4C77C1F12A7AB
+:1024B00093129BDB943814E25FCBAC305E52AAA23D
+:1024C000A1DC1B988425B57BA544DA7F753AAB5F08
+:1024D000080FEF72F91069FFA3402F40BC26BDFB27
+:1024E0001C09303F7DEE91F382E7D0ED2F25DCFE15
+:1024F000CC894C1F69FB92FA71BACC31D2DD784E8F
+:102500008F39899ABF78D17477E462E82EF4BC637E
+:10251000B2968F1E4082FBD7CEAB9D9F9ED705E71C
+:102520002D97D8F9B72A6E15A6A0701E0CED3DCEDA
+:10253000650DAFF733124DDFF53C0F25F4BDF8F311
+:102540007C8779A7267E07381D18A93A409E342635
+:1025500053FAA4786A1458A9F58FE6786AE174FAF8
+:102560005DE444FFEF70BE6287F012E8C3ABDCC7E6
+:102570004A6199B2A2C1A076801FE701BD95E4DE51
+:1025800027CDA1F5A63BE6A2FC3C30B21EF7BDDA92
+:102590006EDCAF5626707C1465AAC87F8D9CFFCA7E
+:1025A00009F323B57E6DFC5CA1FC113A5F285F3F07
+:1025B00064536F06FA484864FA32E8FF75887AFF78
+:1025C000AF84EBAF91D69B0CF18F91DCFF5BFD6587
+:1025D000B6CD430F7A96EAB57F89FFF70D7D027E6F
+:1025E000527A8955EFFF355A4BB17D75863AFAF22A
+:1025F00024D0C7A2EB2E82F0437FD02388CAD630E6
+:10260000FEE0EA0CD977157D6E51C8E3B0BF52AA3F
+:102610002F21FE62515472C9C09E7EE13E6B29811A
+:10262000B8C959853C0BFED885CEF378A2D12F943A
+:10263000C02FE4F3A35FA8D4934E8CF79412B06B31
+:10264000A0DD3910E48E4ADC76D023D42FD4C9A77C
+:10265000B3D69B90DF43D7A372EB69A0A34685F165
+:1026600071A83F28723ED7E46C283D943B18DD44A6
+:10267000D1AD9B99DC782E31B9275D7C77F934AFE9
+:102680000C5C806BC9CA03E0AA4D09F825707996E5
+:10269000273AB15F956D47233CD7E60FC50F3DB98B
+:1026A0000AF174B06758FC86DA6BD48E32537B6DB6
+:1026B0009D105C7F358777247CAC067D1D868FDE80
+:1026C000EE966BA171A29B8CF72F8A872415B0B868
+:1026D0003E09037F91DB496B28BFC0FDCD6AB3CBB8
+:1026E000A1009D6614BDEB067F3E43C6FB0822D5C4
+:1026F0003BAEB6F73CE71A889F85D9DF17890908F2
+:10270000576BBAC9609F1172A7C17E8C746EC2F7F5
+:1027100065E6E712009E397A78869CBB4CC17383CC
+:10272000590FF3C69A5CC447F9223693B85060C576
+:102730009A300EABF1B9C2F95C930736858DAB4C7C
+:10274000EACBEEF7449B5FA4E75F9F44ED693A4F05
+:1027500083BA0FF5AA363E8E9FDF3692C51B6D7683
+:102760009FA28481C3BD9CCF239DB35995E2CBE842
+:10277000FEEE5598FD2D8D345579311EC5E2B50A12
+:10278000879D589C6F05BB7D54523C8B7BA93B15A4
+:102790007DDC4AE4FB89B1D3FD9C474EAE0DD94F99
+:1027A000544E6719EC5FCA529578DDFE4B9234BDEA
+:1027B000D281FC1D69BEBBB99C8FEAE7C2F8ADD5DA
+:1027C000E6F2C1BD56945A5D0062313AC745E6EA69
+:1027D000DAA3D58221161D1D3667C861EF236EE787
+:1027E000EBDB25B50AC6D91589C03D999DDBCB9198
+:1027F000E68DB48F0BAD372D89E9D31EEB39C3DBE2
+:10280000157D9218FF49237756819C260325D23FD8
+:102810008C9E484862F22556EE7482BF4EE9D11D67
+:102820006E3E9224737EFE37F187667717B71ECA15
+:10283000A6FB6DB0492E01E457E1C90EA70E3E5428
+:10284000AFCF4AD2C97DD1E646F9263AD9BDFB6859
+:102850000BF3B70F8C34DE93CDE7F8FA80C33192D7
+:102860005C28E2F0F8779DF3BBE2AF2489C97D0DC7
+:102870002ECD001702FC757F6343187949E1D39090
+:1028800094FCDDE1B396C3E5E90BC067D07F183E49
+:1028900017E2EB209F79C9F130706CB0CB69730DF2
+:1028A000FCDF8C7648B87ED5BAF346E2438D3E20F5
+:1028B0007703E1D0AC1AE2027292A783F995371B35
+:1028C000F59CB8C4C5E533F996C22D9EF78FB711B4
+:1028D0005F4C6C707EB9CC184F684BE27181281246
+:1028E00005F039EB9A24409E82C53463B0920D4BBB
+:1028F000340BA02752609E4184DCC7E567A81E4CBC
+:1029000056999FDC9BD40B4CAFA4E3FE92F83E4259
+:10291000F5601AF56B201E0347047FBA37AD5BC123
+:1029200006212ADE830B1E13FACB0EE21560FE741D
+:10293000D289651F4845A0F367910EA11FC5DF7DB1
+:10294000E5D583417EBF13728E0BD9A35AA9D91F37
+:102950006BFF43F0FEF47F2FBC5796EAE02D267FF5
+:102960003F78CFE77227349E5704F1BC2C88E7F9F3
+:10297000F6039FCADF32FBA3FDEF32C6F71AB35846
+:102980003CAF5CAC7C18EF419D32BA1F524EE77AE7
+:10299000C873D2EC4ED4797D83713FEB99FB2588C7
+:1029A000A310E924C209EF869C28CF329351DE3070
+:1029B0003BE22ABE7F396B9E15EEBD83FE934F64CA
+:1029C000F606B397644E07458E12F45F1ABF3DBFFB
+:1029D000DD71B17ED25EE900DE5F6BFE51837F0E5A
+:1029E000FA4BA1E37C92EF7D38BFCF2F3B21DFA4D0
+:1029F0008DDF8BB59D396888D386FA419A5D751550
+:102A0000DF7FA9DF7DE872B8DF52E61016DF647061
+:102A100090F93A8D8EB3780FFEE2B726F4B7CE72F6
+:102A20007FAB08FC2C3BF377AAED3DCF392139BCB5
+:102A3000FF04E320AFAE54F18960CF69FE13B43BCD
+:102A4000ED3DFDA7D116FF6BB0BF09AF89981712F6
+:102A500009BEA17E53A8FE999ECCF4CE4DC9DCAE32
+:102A60000B81A716EF0BBD976ED2F84FF2087AFED6
+:102A70000F5D5FDE3706F74F145D3C363B184F1491
+:102A8000540FB9252F183F0C13375C0A74A8C50DD5
+:102A9000353DA6D1B185F6B5E23D73F878625BD6D7
+:102AA000C1BECC2F7C2911F8B35C6171236D7FD43A
+:102AB0002FBC2D59878F223FD3DB96FF53DFB9926E
+:102AC000C297241017F30FEA9D565AAF5048E23AC6
+:102AD000E4331BE669152509C877922F0AEB15A781
+:102AE0005CDE285AB7EC7B45149360BD39244A0854
+:102AF000D28F96D7D1E8FF703DE0EFEC29C9753E43
+:102B0000BFBB028268063F293A884F946F0986FA54
+:102B10004392FBA164B4177B05C789900F966DC8DB
+:102B20003F7B46527F0A709D6A551FC6FE3F3CBCE4
+:102B30006F4FC678F1C17F0AEFC175983E009B8D3B
+:102B4000A4E9D6B3D1C661B08E93DD176A71E9E509
+:102B500004EF63B601CE20CEF239F1429CE505F3D5
+:102B6000CB22E8A3263ECF70D2EC94FBB2FD42BF4D
+:102B700027B73A36015DFC2E390BD77FC1E6DE3030
+:102B800098B61FDA220D86B84D83F3192BE4CFEEE9
+:102B9000DBDA94DEA9E3BF434FBAFB84F30FB592AF
+:102BA000FEC5990AF15CB1AC54459303DB45A8F727
+:102BB000B0CFB6B42AB0CE935BADD3C2C535C41482
+:102BC000C6EFC3B730BB76748EC905E2AD8878A472
+:102BD00004B88F7111978F36C40CDCD9813670968A
+:102BE00088F71AB4BE3F96D66386AAE81F0C18B8B9
+:102BF00013C70FF8BCC4C5F2283DB63C5A5F9F53BB
+:102C000032741DADA747BB3F06FAA27AA659427D92
+:102C1000DA1203790031032725AFA3B51881548553
+:102C2000B373FF9ACCECEF27CD1A5C25CC83DCB7CD
+:102C30005546FE3A9426E2FD1385DB12A8FF252DAA
+:102C400086504A2465AAA70CE0584E5A1AC09F2AFB
+:102C5000735EFD522CF927E097BF5301FE5F1FC141
+:102C60000EFF1DDF1F0A114A3F07B7345E47C2E45B
+:102C7000516B74F85C8C2AA5D0FE6BF9BD2E714C9B
+:102C800042FA898CEFBB98BFD9E26B88A6701CBE54
+:102C9000BDB9977EFE2310744DEE896FC87F2697CD
+:102CA00043FEAD1BF3691B4E9A107EAFE60A5E81B0
+:102CB000C2E7608E486D36BAAB7E566F7F5ADFC072
+:102CC000E9B872FBE1C65EC0C22949B8EEAB398FE4
+:102CD00059597EEBC5C7AF87503E5804F953141FAE
+:102CE000A39468AF93E26B314C41EB2315ABD7470C
+:102CF000D76BB77794C6D1255E48165C9B815E7210
+:102D00008802F2035D1013439442EB2032909E92AE
+:102D100008E673AD2FC8DD0C71B175E9CE16C83762
+:102D2000DC33D08AF966A1F9C47B84FA97E2212EBC
+:102D3000152FA0BC3E98F33BBCA73B986E2140AF3B
+:102D400098F04B9F3726303E8DC937DA9FE52959D9
+:102D5000DCCF261E4B41705F31FDAC6A1425A49771
+:102D6000E3D9F843FD042FD0DB2127970FF4BC5B98
+:102D7000C120929AA5A90323E3F595FEA39C9A5D31
+:102D80002C68E734F53CC70B82774D369C63003DD9
+:102D900007ADDB73045CDFAEACBB916059B800EEED
+:102DA0003143F7BF2285F9473225BB1C906F2D6B4D
+:102DB000C6E8F363E4C21B27D862318F09EDCAD499
+:102DC0001C01CF33E624BBCFED919FAD10B76CC093
+:102DD0000FB53A5282F3C57CF9EC4F20FF775CA126
+:102DE000E08B82FDF0FC66FA7FEDA05FE47EB359D4
+:102DF000FE75CE263CCFD842B30BEE72C6DABCCD00
+:102E000025B4FECA2712C6B3C7F51B85F9D5A1EBB9
+:102E1000AF53886F3485EF2BB912C23BEA92C7706B
+:102E20009E37734D286FC6413E36E42FEBF3AA510F
+:102E30001F1AF3B9C7891FA8C5D0EC62FC4A244FFA
+:102E40002F90EF131C46F8D94F1AEF8B2BF32D86DA
+:102E5000FAB85C39440F7B10DE2F6730BA7879807E
+:102E6000E0DD9C15A4B3B12713BC4067F02716180A
+:102E7000E06838678C5F56017E87063CF15F704FD3
+:102E800012E35C7D23DE8373F86B7412C3F16E4F23
+:102E90007FEE27A0A734F887D2C1C5E3FFEAAA6274
+:102EA000C07FBE767F1F82FF107C630C523B47DFE2
+:102EB0009E78C7F5B37AE25BA3831EE7BEBB754D70
+:102EC00036C5EBAB76FA00F0BC49F6DE2504F174AA
+:102ED00041BCF62B46BA59A734DB40EE475D72DCA5
+:102EE00006FE814617446CCBD7DBFBFF2A7C976C30
+:102EF000109833E912BC10D77B0B1E0D0BAEF352AA
+:102F00004A77BECC4B20F74915CBE36850F3D87B0A
+:102F100057F94C9F86CA873FA4B0F73ADACD2FA75E
+:102F20009F2F4FB5D2E626703FD600F976F47CF29B
+:102F300086D9F046039127CF46794936082C0FA150
+:102F4000E8F728DFE739BCAB8430EBA12583FB74BD
+:102F500032BBBF2811FB93695A5E52D507B8FFC92F
+:102F6000AC7EB1FB7AE35FB4AFA3945688CEFF9CEE
+:102F7000C8E3F29ADD3DC1C6F20E271489888F3767
+:102F8000B7085ECC8FA4FD3C944E1671B29DC8ED7F
+:102F9000C0B385CF340D76823DA81AEC4EA1A81D92
+:102FA000EDBEB842A33F18AF461BF09F383AC15060
+:102FB0004FAEEA65E89F3A2DDB1857705F6A78DEFE
+:102FC000BB26CF50CFA81F6EE8DFE79612433DCB5C
+:102FD00033D6D0BFEF9A49867AFFE6EB0CFD7FF43B
+:102FE000F01CC3F301DE4586E7976D5B66A80F6CA6
+:102FF000B9CDD0FFF25D77199E0FF6AD333C1F724D
+:10300000E87E437D68C7CF0DFDAF7877B3E1F9B0B7
+:10301000CE5F199E8F38B9D3501FE9DF6DE87F5519
+:10302000609FA15E4C5E33F42FB5FEDE502F57DE5D
+:1030300037F41FE5386E783EC6F999E1B94607E3E3
+:1030400072BE30B48F77FD2DE43D9D2A16E780785F
+:10305000405F78D48C65346961F73AA403CB850569
+:10306000EEE254E08F473D4D9090D4E0F1FF11AE79
+:10307000A6DF2CEC1BC7EC2795E8E5A7969F4AFD39
+:10308000164F142585D800A5DB2194EE0202964A3E
+:10309000804AD64488F74461991048C4F6C4403C3D
+:1030A000964981DED89E1C48C33225D017CBD44028
+:1030B00016968EC06558A6050660D92B3004C7F554
+:1030C0000E0CC6323D3002DB3302C3B0CC0C94622E
+:1030D0007B9F403196CEC0382CB30263B0CC0E5CDF
+:1030E00083FDFA06AEC6B25FE07A6CEF1F988EE5FC
+:1030F0002581B958FE28301BCB9CC0622C070416D2
+:10310000627969E0261C7759E0462C7303B763FBAC
+:10311000C0C0AD580E0A34607979602596AEC07A89
+:10312000EC3738B016CBBCC07F61FB90C07D58E651
+:10313000077E81ED43033FC3B220F0189657043653
+:10314000615918F83596C3024F62393CF00C8E1B5A
+:1031500011D8816551E0056C1F19781ECB2B03FB3C
+:10316000B1FDAA403B966AE0356C2F0EBC826549E2
+:10317000E0F7D85E1A388C6559E07D6C2F0FBC875C
+:103180006545E03896A302C7B01C1DF80CCB318111
+:103190004FB01C1BF802C78D0B9CC1B232F0376CCC
+:1031A0001F1FF806CB6E7917315FD96D427F96FBF2
+:1031B000A991FD050FCA49337F2F0E72AB31FFBFB6
+:1031C0005EF062BC30A9F325A89B0B2D182FBC81A3
+:1031D000F8F13D81FF269D7690A7EDC34EA443BC38
+:1031E000E9CD645F863EDFC1CCE300E5E22909FC5E
+:1031F000D50949FB92419FDE409B21CF88A8E7304B
+:103200000F7202CF83BC41A20E16DDEA61986118ED
+:10321000F6F359687D462551F368FFA661168CEBDD
+:1032200037E5513F88967767B17CD91DA94C5FFE81
+:103230008A97BB52991DEB2960F7FB336EECCFF8F0
+:10324000A92CF1027E1383C3DF07F23C5B9B3F1383
+:10325000F3632F72DC67297C1CEFDF9C5AD5960A3A
+:10326000FB282139F5B6603FDAFE6284F67DE1DAAB
+:10327000F799183E3C4744EE2754C54D3A8F9FF0CE
+:10328000E68A8E4B5FEA1FACBF15C10F256425EEA1
+:103290003776DF2795D7527D38B1507451C9413EFA
+:1032A00058B16BE447FDD9BA909FE92911317E31BD
+:1032B000A3E8F081445A9FB13C1EF3EEBBF7556280
+:1032C000C6E7131C472E7D891EFD86FAE7477E64FC
+:1032D000888BBAD1EEBA89D32851CD7FEDD49E2305
+:1032E000BDB2B8EF4DB0B813E49F19E7ED50CDDE95
+:1032F000F3E5C710D5425403DD3378AD87FD83EF86
+:103300004FAC26583796F7A17045BDEF8995BD0D96
+:103310000238EFCE38A0BB985C3F395F7C19E029BA
+:1033200061A242A70DEC9848F04C7030FA8B2B52FA
+:103330001D1E8A9FC6BF8B78CFB53FBE4001FABF26
+:10334000C7D62F15F823D9C1E2278DEDEF617C2B6D
+:103350002EDF4F3C36767FEEB4401CDF8AE5AA159F
+:103360002E2C1B571462B92EFD7E2BC44BC464094E
+:1033700032814954C63C8C0769EB9BE3E7588B5D6F
+:10338000946C1D722584904488330C87F736E5CA07
+:1033900095FD08F92695E57DBFE9F8C806FCF04DD6
+:1033A000AA13EBA289DD1BC7E4FB54C84B88712923
+:1033B000259233D88E7F49D8BE19FC913749E786CC
+:1033C0006B008E2A7B1FA381BF6FDA50DC9FC35531
+:1033D0001B1782F7103C8BB20BEFADC568DA3F3795
+:1033E000325E0738E2719F405F12A52F3FDF3751F1
+:1033F000634C309F86DFB3921FF3A91A84F079974C
+:1034000043387E1A155539DF3D0A51A4BFEAE5A9B4
+:103410002D7757083DDB50BE621DF2B9B8BCDA9F6C
+:10342000AA0E73D0F9C75CC9F3EBD313500ED0F6D4
+:1034300001C3219FCE44153AC02D41467EA140884C
+:10344000833C5F6275C64D3A4F1EC4DA150E553285
+:10345000C3FD80330EE0B5969F0FDE50D6CB817F43
+:1034600057BFA0BCF022DD86F66FD1E4408215E59F
+:1034700093C8E1A18D5BE860F2D8945D35D33194B7
+:103480008D033EA27537C08B58697D20D6E7E07367
+:10349000A5BB3E0FEB0ED61F13692E420ED3718BC8
+:1034A000719CD43DCF52ACDBBAD7ADC37593BAEBA8
+:1034B00037623D9DF5BFD875B4B2FBFCBF6372F2B5
+:1034C0004B498D4BA0F43CF696B955A00AC6DFB225
+:1034D000B0AA8CEAEF3FAE785705B9F40195278D75
+:1034E000B41C3B607F22F839E387EE8F71EAE8F580
+:1034F000061ED76CBBC53C1AF45DD1AD62D51684EF
+:10350000F74AC3BDCF1A8799C79BD83E664884DC6B
+:103510009100F2F7F0A58D06BF93F3A1C2DABAF7D6
+:103520007B9B80FBFDA09EC9DB0F960B286FBBF930
+:10353000349E703FDE970C709AB95C27B74918B873
+:10354000D45B88DB20D723C18790BFD2FA97B67EA1
+:103550001897A5969AB52A8C3ED3E014090F3744E4
+:1035600088FF6A70D2E0ADB5FFE98E210AB3ABBD2A
+:103570000638CEBA7328C62B6FE0F17A126FE5FCDD
+:10358000C9FACDA0EBECCC457A7202BD433D6C9EEE
+:103590000D5F7706FDD71D79178507CC97FFA0FE35
+:1035A00080DDADBBFF0C857B443A8C00EF3A0BC14C
+:1035B000F72AFC5BED2C9E94340DE7ADE1EB92A471
+:1035C00019B88F1ABECE4B7B637C26B887DA6ADFC8
+:1035D0000CFE705789276522E06BB319F3DAEEDA37
+:1035E000BBFEC82FE03E789319EF4E167EF14001E6
+:1035F000DCCB76713D4615413B7C47C14DB43F5510
+:1036000080F91710367F97760FB2350EE17AB26CDB
+:103610004BD3085A76EE595A09F197137BC71F040A
+:10362000FF79613491D2C0DEABDF21233C3CE68FD1
+:103630008C768214AC8B3DEB0BA0AE8B232DF49AD1
+:103640008375FABFC5DB8C753DBC4C7A7839CB8C61
+:10365000F072961BE025BC68F7893A78959D792928
+:1036600011F4FB518713E7AB39D39802F0A9D9B312
+:1036700016CBC5DBA23C1FE9D65DDA126FA8D7EDE9
+:103680004AF3E8F5CBD9438FC5C2F9973944CF4700
+:10369000547E9C5AA136001D9F5E31BA414FCF4BDC
+:1036A0005BB23C36C33CC6FAD96601ED14D0339305
+:1036B000CF632F2E73C8B8CEA7DB98DFF9E90AAB2A
+:1036C00007D639B542F1B0751D1E664F31782DB958
+:1036D00025C6F3D190E0FE22CDFBAFDE1F21ADE485
+:1036E000B895E0BB3BE7CEA3BF23F28BF4A58CF2E9
+:1036F000BDCDFC17A01B2BFDDF398CA74A58D7E6A0
+:10370000AD6B113D90574CC876C37A749CF3639DA2
+:103710005D10593F18BF373102626228A7D97D88F2
+:103720001BEE43E87C5D926D0DC413B4FB903A58D8
+:1037300088F65D6AED94DDB4E9F3D6BEE77DDF9CE3
+:10374000E2290BF4738DB55906A55BD332A00CF8B2
+:10375000E9F3D68614B067178B677F1CEEBDAF29DF
+:10376000699C6FBD66BFD16FF46AFBCC920C7C463E
+:103770006CDDE7A6F55311DEF399C5E7ADDD7EB844
+:103780006204DD7FEDAE3332EC2339CD3D2B2D3994
+:10379000787E81DF072DDA760CF9FCA4D973C9EDA8
+:1037A000E7B3F37BECD3E630E41F7A4807F0E79CFD
+:1037B00042A231ECB5EF5379F3C96B6602F788E4A6
+:1037C0005BDA8B3ECFE44FE791AA5880D79CD6C5F1
+:1037D000287F3E7976DC419687D45C00F4F139315C
+:1037E000E1FBEE9F93DFC50ED1C16F5D9A9647C98D
+:1037F000BE73A3E5B9D00DA6619E7A4D5307BC3FB9
+:1038000066219287CB25817DB7C62BA0FD52C3DAF6
+:103810003DC4BA12CFB186C9230FFD0FEAF39B8DC9
+:10382000F269C1C3C67A3599940279DED50F982121
+:1038300093882CD4CB3F0ABF1BD398FFB980D437D1
+:10384000815DF788CCF2BBE72844EA4DF5D1D2E799
+:103850001E29984DEBF7A5317BEC53EE6FC07B8CA6
+:1038600069F4F9A25BBCB29ADBF37CC75B874C1DA1
+:1038700041703EE63F2DD2EC57E284787E6FF857D8
+:1038800076E4F3F76E15F1FEA937B4EBE4F3DC351B
+:10389000C6F35DE8FCA1E725E47E3CC7A26D57A313
+:1038A000FFA69D47C397761EF3B6F0EFFB6E4B1352
+:1038B0000C76DC2E0E3FCDFFDE1352DF97C6EC7A7E
+:1038C000ADFE72485DA36F33E76F4AF77B80EE97DA
+:1038D0005AFD158C4E3A65FDBDA81CECB72F6D68DE
+:1038E000E47E16CE2FB4DFCBE7EB17159CEFF57017
+:1038F000EB2E7DEEA967C12F5DF49B0763E152E8D3
+:1039000013A93905DEB758B275552CC0E9A4E4896E
+:1039100005BAF9C42B8E0E072F532F0D5EAA4DA0AA
+:1039200078AFD5E8BF68E504D0EF7FD96A56C03FCD
+:10393000ACDB66F1C177986A5B17E2BD0DAD1F6322
+:10394000F5D5F87E65DD2EF3877ABC2E7AE2C114B8
+:10395000CCF3209EDEEC5EDDD71B3E2154BBE5CFD1
+:1039600015E02FD7113FD273E838583F9080F27A94
+:10397000B61CD7F3B9163FAD634DA4AE75FD1988DB
+:103980009FD6B58E39017C5F47A40FF5F4540334FC
+:103990004DFD962FD278FEDD15E40A902F1A3C8853
+:1039A0003719E573C3933F1D748CEEE7D496D76245
+:1039B00005BDDFCAEFDDCFB6CCFD53E279F4C369B4
+:1039C0004AA7FAF73234B9EBDC4537904AAB6DAC15
+:1039D0005C62F6C58EA0705DB2C98CEF892E79EA63
+:1039E000B1C77F0EF944EF59F01E64F153078E0CF6
+:1039F000A7F5C53BCC4995EC1836B817D6F0524719
+:103A0000FF07F7141A1E163D734086F768A01DFCC9
+:103A1000040D1F8B77B4CB64604FF895B6B4CB9D83
+:103A2000B6307869395681EF1B3DF9B50C78FF64E3
+:103A3000AF4052B37A8EAFD97400ED188013E29183
+:103A4000E3A91B6F3DF0E59BB03B1FFB2920B72F7F
+:103A500084AF77B85EA574FDF46EBA8F9A3F585C58
+:103A600000879AA76F8A85F39C90EA197D3FB22A56
+:103A700005F2DD6ACC9E14054BD65EF3E8CD48779F
+:103A80000B0EDF9CC2F20FD5349EE79106E79CBF78
+:103A9000710A9EB39AB891FE6A1E11AB201FE62BE5
+:103AA000898CDE11863F6EE3FC716233452E3DE763
+:103AB0000990973ABF477BBFF9E6EE7808BB8FFCC9
+:103AC0008ADF4756F53219F44B37DD6E598D72F5A2
+:103AD000D30C3515EE29291C34398AF2553C5C9EED
+:103AE000CAF0C4E4318EA3F4570AEDD0BFC38CF7FB
+:103AF000C3BA715C7EB2F597F3F5E9BEA3C11E3976
+:103B00009112FEBDA0C77B09DAFE3A888ECE747C86
+:103B1000CEF87ECB5AC6E71ADF7BAF1E0DCFBF7C37
+:103B20009BF1118C037D44F7E54BC5E7ED930594BC
+:103B30000B16E20BC7DF5BCC9CBF8DCFA9C58EF601
+:103B40009C462774FF127C972C482F749D04C40355
+:103B5000DA2BD50FD0F13A3BBB0ED6C57E72B03D05
+:103B60002BC8C70BB83CB8B91795079705E501D91D
+:103B7000987C51F1812566EFE33F07FEA5FCEA71D1
+:103B800002FF9AF1FD9BCFB6EF3F721DA5F3CF5A0E
+:103B900034BE35CAD350BEADD97933C60943F9F620
+:103BA000B3F47A12966FD3F9FB73A17C9BDEF91FF5
+:103BB00095A71AFC1E09811F958FBFDCED8C0CC7E1
+:103BC00050F938AC9733AC7CA47F6F93829E74A875
+:103BD000D19F46778B7EBDB40FC8A16EFAD4E8AFF3
+:103BE0009B3E35FA0B3DAF117EA1CFAB21E9496772
+:103BF0003F98EF221E3BC5B77F8F88DF4DEA72FAF0
+:103C000063210EB42A8ACC023BBC4BE1F57856F70F
+:103C100027CB4D2027B4767F148BAB7555F963E322
+:103C200075F6F5B1363116E2BC9DDEF0DF79C3CC16
+:103C300044BA7E6784EFC0697189AEE8D841B85E46
+:103C400074A617F0552EDA326F81FCD16611BFE7EA
+:103C5000336FE5B5B19027D2D5D677E234DA3EFF9F
+:103C600015FE393F8F2AA55138CFE5783F493C0FE3
+:103C700015D1F3CD6D63F6F3BC0DE1E944BB3FAF65
+:103C8000B62D97411E51BBF5437DFC6811FFDE4206
+:103C9000CDC690F6B671484F8B42E8C9CDFDA3134F
+:103CA000BDB87E1E4C0673FFC4A4CF0B2917732723
+:103CB000C23B1E5D8744CCBB3EDB26922638E776AE
+:103CC000C14B80BF3DC94897B5547EE8E3C0A7808B
+:103CD000EECEF33EDDA9DFFE77C1EDB4CB9267DF18
+:103CE0001FF40B5A9E7AF6BD4B5E80FA734733DFA2
+:103CF000273DFB97EEFD6626C8FFAEBD1682719587
+:103D0000BD2F67DE0EF5DD16CC3FEABACBC2E2C1AD
+:103D10007BED984FD795C1DE8B69D8F3F520CCDFCA
+:103D2000268D88B784DECCEF38DBF6B73FE27BB672
+:103D30006DF454A06FF7C6A03D5EB73BCA0B4E6A48
+:103D4000D79EAF0BF4F718DFF73CB5328BE377D98A
+:103D5000C934887F75C5B33C9BBA17863DB692AE11
+:103D6000BFB4B55D86F7774A5FFCFB2090375D3BBB
+:103D7000991D71DADCF928711192D1FB8EBBCD143B
+:103D80005FA7C1B6A3BCF27CEF3DE3E19EA3275C35
+:103D9000181CBA281CE05C142E35202723C123BF31
+:103DA00037FB4ECF0F0F1E6766C2FA4BDAAEC07BF1
+:103DB00088205C0495B5DBBD5601CFCFDAF77E3D98
+:103DC00008E4F1672D2B51BF5FE8DCD7FC60E9E028
+:103DD0009F3DB7E0BB98732FFBC19E9BD17F00F442
+:103DE00053724F3EE849E7CFFD18EB4FDB5DB8DF7C
+:103DF0008BE4FFFBFF5FA3F79D02E6B15C08EF3B9E
+:103E0000FED7E2FD158E77BB02F9125D7BFE9E495F
+:103E100074E7BFD0B93B7EB0F83EFFB9353BA8C3CD
+:103E200054AFE4D3FDBD479AA764D1F22DF58B249E
+:103E3000705B2D91EE6BD2995F611158FE3799221C
+:103E400068F1A50E43FE537A0DDA1B13D4BBD97764
+:103E50009AA4FA0EC83FED2899EB5A873DF2F0BBC1
+:103E6000021D9347F2BAD1DF7A5320AA40EDDB0955
+:103E700025E30E81BD375115D11EA425DA81EF64EB
+:103E800056B0F642A39F313DC43FB8769AF1F9147B
+:103E90003EDF54B24CC9A7F09A9A2E295E0AA2E9D5
+:103EA000C5F56638CFF41B04D2AC8B6F4E0999EF81
+:103EB0000308A0E9ECC8EF0ABFBC74E6775A846532
+:103EC000080F522CF2F78D2E003FC2E0DD31793021
+:103ED000CB33965C0C7E5397BA306ECAFD50331FBD
+:103EE0006FB6ADE900BE3513A3FFA9F99191E04C7F
+:103EF000B85F8AF36407E16E5645F44B75F3213CD5
+:103F0000347C7C573C68F8FBBEF890D289E15E5562
+:103F10002B175A672F867B082BE4BDD379276E6059
+:103F2000EF91587305846355A119DFE3FAB3A9AA89
+:103F3000000CE7CA2157D4DEC6A675017C1672387C
+:103F400056937AB43BC9B7E7CE1515E0AD1FDAAD8D
+:103F50000B5542C653BFA4BA48F045D3F32F9088FF
+:103F6000272E0FE2A002F9501F07F51AEBF0776534
+:103F70004A709E0BF58F241FFED5E59FA83CFA9052
+:103F800022FD1894983F4324BDFF38AB8DC1B16E1C
+:103F900089E0CD463AF299F5F7C04F70BAFED31DCD
+:103FA0004350CE15DF3B308EF9B5F998D753C7EDA6
+:103FB000FDB31E671CC473CEB6F58D8378CDD9438F
+:103FC000A5B1E1F2790E73BFF2F72BAC58769509E3
+:103FD000CD621CBE7F3201F570591401B9133A6EDF
+:103FE00075BA1697A997318E4F583E7E353FC70256
+:103FF0003A342E4187B70DE33F9106F5C403FC7DAB
+:10400000A8BB57F9BEF0053F16E07A38AAB322DC08
+:10401000770A7FC6E56AE5BE6F64881F4C6ACBC22B
+:10402000EF4C4E2A33BE0F785F3AF7CF879021B01E
+:10403000AFCA7D636287015E0E89AE280ADFBAB619
+:1040400033B23BCCFD5C283C617E88231F37BBAA82
+:10405000019EC7EF8EC2EF00BCC1EF8B72F9F72152
+:10406000E11342103FDB9CCEEE21BE4E6771F46B34
+:104070002A8BCDC974DDDC566530E497F5E2FDBFCF
+:104080004E77E2F3DE7C9CD6AFD712D6EF98ACD455
+:10409000863B7F4626A39F05C4F5E342E18787B7A9
+:1040A000E27BED3E783FEE6C99C0DF9F09A56B8205
+:1040B000FC7176B4E005FD0B7E2CD62B05D4FF6F8A
+:1040C0006879159398BED4E83E14CE6F71FAD5D6B0
+:1040D000EFE2707F9BD38706670DBEA1FBD5FA5335
+:1040E0007975953EDE3271D7E0A7C13EA96D1314F4
+:1040F000139DAA56EA94810FEB76DD6786FB85E96E
+:10410000FC775A885435487FBFFB75BA84F3EDCFEE
+:104110001B81F6E3171B987DACCE3B130B76D01BAF
+:1041200026D75B23801FDF140DDF370F2DDF5FA144
+:104130002C2A33EBE7CD627ED29262338487AE5F66
+:10414000D26E4ED5D1D3D7908F3534D8DE6B89134C
+:10415000F318E97AB80FCF3D1602F94BB92D1D259A
+:1041600031F4F9F5F5F18C0E6B5ADA65ACB3EF0D5D
+:104170006BEB69EB84F2D3E4CA18437D6E69673A4E
+:10418000C0A5D2E25BEE0A43A7F76774C755BF9B91
+:104190009E5029DD0EFAFF414F9CA908F73DD4D966
+:1041A0001C6E3AFD901A4E3F2C5BE94C05F82FDB54
+:1041B000D337159863D92BE529E1F4C33B2BD8FD00
+:1041C000E1519E7FD93599EA87CB75FA617214D295
+:1041D00047E8B87119DA77552EA01F347CFD87E5C2
+:1041E000CC3BA01FC2F0F5CC0CA37E98DA361BF5B1
+:1041F000C3D4C92271EAE27153322EA41F8A53A696
+:1042000063DDEC8A094337EF70BF04E00A25AC0395
+:104210007AE2EE0C26F743F54524799E7DB1F2FC57
+:104220007F08CE9A3C5F3685BDCFDF930E09CAEB7F
+:1042300065D305FC1D93657B983C5F76038F4B86A9
+:10424000C8D72A90AFF97AF9CAC6D7BA993EA8DB7F
+:1042500095F5D319F4F975CD669795F6BF2E286FAD
+:104260000BF4F2F6EE0C498373A61206BFD366C4B4
+:1042700010A7515EF50339757CF0CBB9CF00DDBFD7
+:10428000C1DE37FB33D7E3AF0F7E391FE2E91FF101
+:10429000795B33185E4EAF208BCA281C4AE7317B0E
+:1042A00078E97611E150DBCAECBCDA6D02BED75B6F
+:1042B00091F70DDE1B2EDEC3EE0DE1BBBEC53A3C11
+:1042C0002E7EA3B3A9373CDF24E0BD67B56B317BFD
+:1042D000FFEF611627B6D2FF205F626D74EC668235
+:1042E000793A2AC69B9772B8555AFC07617CE51348
+:1042F000826B13CA35637C7A69BFB19F807FB078C7
+:104300005B48BB6B2DDE672C85B8B3CE1FF93DE74C
+:1043100093F9A22FF719C80F7C4B0CFBBB675ABF50
+:104320006E38D47C4F381CA670C8FFE7E150D776B2
+:104330001FE6DF7CDFF3BF93C1E3ED79241FF8E5CF
+:10434000CF2615F9DFF3AA88EF17CFBBAF7FAA3EC0
+:104350004FE93887C31B2677531AF4AB65EF212F3B
+:10436000D8B8E300BC223EA3850C86B0FD82878DC1
+:104370007AB25B2FB73A51EFCEA8DF21C077FDE7C5
+:104380008B047F0F6C6E9EC50DF7AF87A3FC28CF03
+:10439000343AB467B2DF8F8BC964EB1EEFE52F436D
+:1043A000BF6297A0209FC07735A04EF100DFD5D81F
+:1043B0003FECEB0A0E778CCFD4ED6278AAA378019C
+:1043C0003EABA0F62EE891EBA9DEC1FBB2B6763388
+:1043D000F4AFA1FD1251EEB8D0DFD5F413DCDF1538
+:1043E000A7E8F0B6E718A3DFAD828B84C15B0EFDB2
+:1043F000EF7C788B842FCD7EB858BC69F0B0671AFB
+:10440000F17738AAA37208DE53B1DF03226DF17889
+:10441000AFF251735FC4636F2E6743E91BEC7DA756
+:104420002EBE74356C1C3F601F857972B86E36B332
+:1044300087F4F225D48FAE231D68D724A7B97F9DBA
+:10444000AECB8B9BCAF357BAEF7583FDE6679CA78B
+:104450001F7194E0FD8F96570BBF2085F960BCBE9D
+:104460003FA3E0E80C7ADE2FD688F89EF2B526E767
+:104470009122E0E375660274F9C5EB6695D9A13126
+:10448000288767BF71DC0CA191D9905F40FBCDBE3E
+:1044900093C9DBE330196DFB03D5632A7CBF84B479
+:1044A0000C85FCFDC9AEF672C8DF9E927F7815DCE4
+:1044B000D35D53AA1C3902F05D2B1280EF876B4A43
+:1044C000D15FB9E94601E9FADD15F89B5864CAE401
+:1044D000AC2347E8BA37AC49C67BB619EA8172A06B
+:1044E000B7B913ED36B8A71B972306F37B09BC0FAA
+:1044F000D5B10AE4F78CFA1BA7C07E6BA85E80B822
+:104500006B4DDBE1F254A86F14F0F7D4EA3C6E195E
+:104510005E85EA78F88C0CF18F6ADA0FD053B79188
+:10452000F5ABDB22E07B3ED5543EC0F9AAB70804C8
+:104530005E28E9A0F69F95CDEB850F34756CA4E35A
+:10454000697D018C8779B7C4E3EFDED5BDCEDE137C
+:10455000AA2E5C7910E453351D471F938E2D37E248
+:104560007C0B370A0452836B0AB3EE2984F95E3759
+:10457000E3F7418EB6FF4C867DCFA4EBA5D1F9E7DA
+:104580008A9DE5986F7DBBA0E07B4D65B7211F74C8
+:10459000713E2049B7B2FB6681D7B95DA8E9C7C7AC
+:1045A00032B391BEAB6F59D904E7EAF42467814B6B
+:1045B00054B7EB8C0C76DE472BE00334146F3C0FC2
+:1045C0006EBFE7B8DCA99353BECCBE488FF3761517
+:1045D000239FCF2755782FEE5EC9F4F2B155515E77
+:1045E00001EC11B3827A73FFAA1F3D04E73FFD94EB
+:1045F00019EF4B4F6774627CF6C446337E3FA4616B
+:10460000A38872E4C4761617121F99529106F0A37C
+:104610007200E86EFFC65219E4E109AF80E34B1F58
+:10462000B93985C57D8DF2A3DAB908E5C523514CAA
+:104630003E2C7838FCFD6A4479B1BC82C9F7107908
+:10464000B034BD09E37EA172A28ED834F99007F58B
+:104650000E5F1AD26FEDEB6602F65DADA4CC7C184E
+:10466000E8664614DC2453BEF01D00F9F685577049
+:104670007AE8F3EB673D3F14E0F731C01BF8624383
+:1046800022DEAF567B67235CB57CC4050F1BE9595E
+:10469000CB7B9AEE1683EFFBD0FF5D5F1343545D37
+:1046A000BFA37752BAA4EBCDDA2578E13B4847EFB8
+:1046B0003C76F0E67CAC2B4087B5B770BDBAC18EB6
+:1046C000747BF4D633AB802E67DE21E0FE89C7DD34
+:1046D000047AA5F661C10971CD0577B0F10BE878D0
+:1046E000A097A33F63F443E9D809745EBBF1BE838E
+:1046F000D87F8BE084F98F6E9A8D7AB8C623127CAE
+:10470000BEE518DACB541F60DED07E8F9802745E4F
+:10471000DB685100AF1ABD68F4778C7F879A585DCB
+:1047200083AEA1E36ECC7486A53B715A16D257DDD9
+:104730007633D24B9D87D1D3B1A744A4C3FDABAE92
+:10474000AD00FA39BD5588407F94BEF283F4253E12
+:1047500062C6F10B9E64F185FD1B195D9F6865F6CD
+:1047600069E923FDD1AF59F08699B0F803B1E9EDBD
+:104770008F0BD16128DDF5D04B9C0E23D19DDBDC66
+:104780003215F20F663F4DF7EF0CC2ABB4E9568C11
+:104790000394364DC7F36AFC532DB1BC8D79CD2BF4
+:1047A000593EA3C4F27BBEF3BE42F6715F503FE6B2
+:1047B000817E84FC131FDDC7CBDB1F433BE0F35F2F
+:1047C0001DC3FCC6C52F50FCD3FEA7B7DB890FED78
+:1047D0006C2FCA9945AD22E69712C957708DEE7DB0
+:1047E0000D2D2F63F16FEC08F7453B2DDE4A3A7E25
+:1047F000D1B3C707E13DF95DCC4EF5FC8A7D6F86EC
+:10480000783A075D03F99912CB0F09D5BFD17D58CE
+:104810001CE7D4F331F85D26615B3BDE332D6AB9CA
+:10482000D66CD1C52D853E66AD1FDEDF7828FEE152
+:104830007E11F6A7FF5D092D2FE4D4938C7F16ED32
+:1048400032A37DB468DB268CF7D56D3B83F9B3A525
+:10485000BF792A16E050B74B34E64F6D137D16CC66
+:10486000F3128F59D8F7390C794CB5ADECFD8EDACF
+:10487000169E2714923FB3F8377B9EF550D02C7EBE
+:10488000E68958E0A74F3BB6C6023CE97C987F34E6
+:10489000B130427ED285F2925AD6F2BCA4F1F87BB6
+:1048A0001DA179499FC23FA81E77F531E679926D27
+:1048B0004C6E51EC17847B1F49B35F163FF5D5A3AF
+:1048C00090477B6AE7678FC2FE97FCE38B4721AF77
+:1048D00083EC8D52C09EA8FBD53B987FA88D1BDB37
+:1048E00087FB474F3E81F99BA7DFB3A05D787ACF66
+:1048F000894CB0174EEFF82605F23297EF29C7F82A
+:10490000C4F2DF96E27BA291FC4DA04FEF45E48F0D
+:1049100086E2637FABE8B3D17D7EFEAE05F9BF3B97
+:10492000CFAC6529CBDF73F2FCB2EDE1F374B57C5B
+:10493000A8DAD66B268E0479D7CAF47A777ED48526
+:10494000F2CADEA678BDFC22F0B79DE70FB68C0F49
+:104950009B57F639FC83E2A9A68F31AFECABD6F9B1
+:10496000BFFC393C6B0DFFBEB6C6D717829B9607BE
+:104970003CB48F7A531FE08F9DBFC63C3EC05BA501
+:1049800013F4FF579910DF3C69F663DCD0BFC7A270
+:1049900040BED7A23D47915F4EFFF630E6D9129E4A
+:1049A0008F7B9A74FFB1BC491EBBA8DB6267F968B4
+:1049B0001CFE90AFE68CC5769E97C6E858CB578B09
+:1049C00094A7F6649F6C665FF3FCE4A5CE0E59B124
+:1049D00005F105F8110A015FC70CF97FDAB943E761
+:1049E00053000E57E8F32F23E503723BBD07BE9833
+:1049F0005C3EBD89E76376E75912929E07F9414C08
+:104A00001FD67985A3E1F0ABE55F6E09C1AF76BE35
+:104A1000487CA1F1E785F7FDCFC1E5A13EEC7D0023
+:104A20000D3EA7BE0D2FA75FE4FC4EFD96BD7D7425
+:104A3000EFBDCCE27E8B9677A6EDB7A985E9E5536D
+:104A4000DB98DD18CADFB5117E57EB0DBE4EEDAE1B
+:104A5000F64120874EED7B9ED39D97BF87734CF622
+:104A600070B9EDD5CBED08BF6376B40FF317A9BFCE
+:104A70001B76BEBAED67C2CEF7A9A45E0BFBFFB4EE
+:104A800083D9219FB688617F0FA1BD8FF17DD52687
+:104A9000BB8C7E97181B8DF268B9BDF05DF8BEDB4C
+:104AA00072BB8CF90E0D2B797EC49D2EFC3D8F06BA
+:104AB000FB58FC1D8855001F9D1F6A56DCF8FB1330
+:104AC0006647553EF857A1EF77CA4926E2D5E35F1E
+:104AD000F2A4E3F7BBB2BF9640EF74AC30BE37D25E
+:104AE00021290712E97C1D65820BECDD9E74669C12
+:104AF000FF6A5534C4CF20560DE73AEB62DF45B369
+:104B00009B7C0AED42EC511D0E74F49CEC77ABE1FA
+:104B1000E7BAE03E7CDD0A6B3F788FEBFF022FB6F1
+:104B2000D5840080000000001F8B080000000000FA
+:104B3000000BB57D097C54D5B9F8B973EF4C26CB81
+:104B400024936560202C37FB1E261012D058261B9C
+:104B50000609382255D480376C610B89686D6CFD6D
+:104B600097613145E5B5A12E50A5CF01C1C7A3F886
+:104B70001A166BAC510708142DDAD0E293FA571BC2
+:104B8000942A28981194F25A2CFFF37DE79CCCDCF0
+:104B90009B0984BEFEA3FEAEE7DEB37EFBF79DEF6E
+:104BA0009C89252E89C884D85C8AB7279BE0DF15AD
+:104BB000FA5F1CA1652B2FA7E0E3787A092131EC7D
+:104BC00015FD6EDF6F920889CA26D94A3121761207
+:104BD000E59269F98958F761299690F536AD96D036
+:104BE000E715F89BD4FF495CCA2918CF4AFFB99250
+:104BF0004AFB9B40CBD6E0F8F16E7D3991849471ED
+:104C00003E6E4286C07BFAA7123259A633A3F388C0
+:104C1000AF36F92224FC5E9B312438DF780771F926
+:104C2000E1FBB4189797D68F8961F313F3A5F3F9D5
+:104C300018E6A3D27F703EF93D5E13C1797D1C3A20
+:104C40000FFA27796C38BF8F0DF3FB38747E05AAF5
+:104C50002DE9D3685A50887285C237C6DA4D389C20
+:104C6000CF87C299102F514A009E02AEF43BED2728
+:104C7000457A52B922015CED1249C3F10CED46D8D8
+:104C8000B17F28D37EC7C09A271252E694DCA7C60C
+:104C9000D1FFEF4C22641821A92D95E4135A96DA1E
+:104CA00008C2277D3DF145D0F9A5074C58266BA3D6
+:104CB0007C19B46D84957823C7D27A0AF19AC742D9
+:104CC000AF3E42C62370579B6857CA3A421EA3EDB7
+:104CD0003A0315A60514A8EDF089F63F51754F511A
+:104CE00069BDD6DB34A7A9089693D7D65546081DCB
+:104CF0002E477211625A95DB7D6424214950FF06CC
+:104D0000F89EDBED8EC1EFAC4C889FD075B545F5B4
+:104D100095DD56272DA7B2F29DBEDCB675B4BF0F48
+:104D2000D23D77AA0EFACE6ACF05F8137F02AE778E
+:104D300040FAA270258EE03CB3B7F92BA3E8246EAD
+:104D400009508052FC67D03EBAF3013FDD16209235
+:104D5000ED31A2ECB710FAF4EC3B66E9A1CFC6F650
+:104D600063F8DD0465FA1C9DE8AF4CA6EB7C50BDF2
+:104D7000D1E3CCA1FDEDAB779AEC84AC546FEC564B
+:104D80001CA17098A48383B2FA26031C6EBA2E3835
+:104D9000ACF4DD847018ECBACFA99E1F015EA69614
+:104DA0009B8844072D3D11E393181F477A0A82FD23
+:104DB0006C319145ED31E1FA59C5F0CFEB093A1A62
+:104DC000884ED2883D17E8D4482F747D35ED148E77
+:104DD00053B57A4F5562904E895D1B37A300E63973
+:104DE000F74998A718776AF90A3995CEE7498A23CF
+:104DF000E8D7D1E28DCCA474EA709B5CC0E7E7549D
+:104E0000EDE7503F7656C06FA6554A8976BF941697
+:104E1000EC5FD07DEB6B32D2776BBDC9B71AE54141
+:104E20008F04EB0EE2BDC780F700C37BC749C4FB0C
+:104E3000F2CE930CEF1DAB2AA28AA12CD923545891
+:104E40004FA008F0F92BDF9D1E85E2737474A01546
+:104E5000E8C14CBEEBA9CD41B8BF0874DA0FEE7CB7
+:104E60005E02FE03E1ADED48EAE3F9B4AAF7A8C992
+:104E700095A106E125EA1D572D586F63AAF61B1868
+:104E8000A76942CF61BA52B2E7C81F62353ADFD88C
+:104E9000A333F643FBD89914136A70DCB6A3AB2B8B
+:104EA00080FEDB80FE51CE04BCF698ABC183F14599
+:104EB0001F3CF69D44F898A04CDFEFB430BA29EBC4
+:104EC00090DC3EE08B6872AF873EDF564D38BF9373
+:104ED000AACC9F12C3E3D103B24ADB97AD35617D03
+:104EE000073CF343D7BF16EB9D54152E77183C04AF
+:104EF0005E051D51C289BE8DCE797896F63EAC3FD7
+:104F0000483709D1A9F47B69D7DCFB496AB0DD4F8A
+:104F10005612CF7C73B01EA59F9775F456608E0411
+:104F2000B8F5D10FA54B902F46FCD076A7193F2599
+:104F300044ABB4FEEEAE15B2963F78BC9644906694
+:104F4000987F493469DE43DB97C4D127941379797C
+:104F5000282F27F3E768FE3E8F95D33E7099245A99
+:104F6000DE0270073CA498189C147B2EF0912985D2
+:104F7000C1B9CC198DF25FF0AB42C11997006A88B4
+:104F800078E1991A4835011E05FF2A0193DF46F59D
+:104F90005FAAA29A5CF4FD5B2B354F55C6C0F2E5C3
+:104FA000961CD9E30B232FE25218DEA980F69ECA85
+:104FB00006ED2C91382081615A5C0A9D57A3B5E714
+:104FC0002733E8D7E539172C809FD5D1CB6FD4F2A2
+:104FD000071EC7388FB72EFF361AE8ABF352444D81
+:104FE00038795503EBA7E31F59390BDB3D1A155BE5
+:104FF000C8952ADA2DDF41D1449FE94B6A4921E067
+:10500000C3AB2480FE8B965CDB09E285E9C3A12952
+:10501000BEED29801F5F2D96F3D2C87609F0A4ADAE
+:10502000B141594EC1FA1472C23E92AE4460DFAA39
+:1050300042ED0D44792AE0B3F9A00D847D04ADAFB3
+:10504000C27BBD3D45E7B7958C017CB7552540BD7A
+:1050500038DEEF2566E708BBA83AFD963312CC7719
+:10506000B45701B94AD252703EE5C4ACB38F4AB2CC
+:1050700028C8617E59B93EF85E69357CE77454DD15
+:10508000CF8E6A73CDA0F43E359BD23F7F7F81FEE9
+:10509000373A82DC7B5B7E50BE4F51EFF254E9EC35
+:1050A0008F3617F0E1EFBE9591EF8DF8D8CAE9F190
+:1050B000C84A8FA78AF2DFAF22293EE87A2B5469CB
+:1050C000AD4DBD36FC8C7833C2EF3B9D0BD17E33AA
+:1050D000C2ABFC03575582DA1F3E467808F8D3F579
+:1050E000AD07B85567CBA8AF04BCFBC389D1C3EFEC
+:1050F00072683D89D10FC38744905E04FDC4A52129
+:10510000FC4B80F6E07B740A968DF035C293CA01A1
+:1051100037D6E7F83B0C70CB80AFEEDAEA214138A6
+:1051200050BAEA8A0FA12B01877E72238B9739DE52
+:1051300085BD5CCDFBA1F632DAC3950E9B0BC05F3B
+:10514000D9C8E65B9911B3D59B82F8DA8AFCE3A74C
+:105150001829C17FD9DF2566E752BB94D167E7E400
+:1051600033603F8F8ED0D6027F04A478B29520FCA6
+:105170003F36C05F57AE36D8CB4678FC0AFE676232
+:105180007FB809BAFB790AB5AFF36871381901F62F
+:105190006FE12BC57120C7496702CA63233D969E04
+:1051A000F0F4F5C3E917E953225ADF7B3BB5233A04
+:1051B000B21F7902CC9A1BAD6D32D0E18DC4BDE631
+:1051C0009415D62FE33CC5BCFEEEF4EC4CA1F26680
+:1051D000624FCD9A53A17CC1C717F0BE89C3FB268D
+:1051E000E2DD2FC7C253F9BACF8E0FE96F6F0AF70E
+:1051F00017924932ACC79EA232F9CEFB13EB1B9D2E
+:1052000046FC12C2D9EADB2AC1FC89D792101CCF16
+:10521000CCD1949131E3B51494C7CD04ED656A5EA9
+:105220000212CBF8F7326B8C1FE64302CAD93E3C20
+:1052300020DFD5D901AE142EE44A74707EBF4B91A5
+:10524000944FB383F33BB7C3EA95819F8769BF87C8
+:1052500071CE4A470B916F157F26E841E3F70B1D8E
+:105260005DCBE13BADB710EBF1752D05A791D25D9C
+:10527000E0B508DFD694ABD8A156AAC242E44159A2
+:10528000149327D5242083DDD919C9F8F9F5AF1671
+:10529000213FB8897D6D1EEDEFD0F9C947809F2B66
+:1052A000A978817A932EE9FDB66BD1691509CC8175
+:1052B00076D576B3C10FF4A2BE59CBE59AB0D34CE4
+:1052C000A9DAB9147C3FCA077AA6F3ABC92AE06D04
+:1052D0006BF6F85B6EA7555273C6CD00F7CC64ED44
+:1052E0003683FE9BCDE96B02D097845690A0AF8B9E
+:1052F000D04FDA3A037DD913747EDD2DC48FEB2FA6
+:10530000CB36FF4D373F6E9718EDF5A09DDE16D6D4
+:10531000BF235D0AC9A6709EC3E1BC36DEE205B9B3
+:10532000A6DC27F9480ACC978C5A45E739BBD9AC9B
+:10533000F347E7C42B88C739AB227D84F9DFCE7AE7
+:105340005AD6E8FBC7A098ED7686DA55A425A43D89
+:10535000D0438C8AF43BC7CEDE7D44FB189600FD1B
+:105360009E72A013EF359F0FA553E3F803F66B6809
+:10537000B75622B3C07E5A6B763B5D21F6C7A85460
+:1053800066BF9CB7576D32A50E6C9768D664B7920E
+:10539000182CF7C45B67F9C2D831A23F4127651AC0
+:1053A000F3CB07EA373D50857699E949BF0CF6768D
+:1053B0007A80A07D5C16709BE6E9EC74E69FF6B3FC
+:1053C000D3DBF7A39DBE6CDF7E66A7B7AF427B7FC2
+:1053D00019B5F741BE53BB1164259B503EDAEF7DF2
+:1053E0007E26E52D52D62EF5F9A10A45455A1BAB6E
+:1053F0007FF7D6ECF847D3C14FD49C66EAF7DC9D23
+:105400005AB0C14AFD9ED6141249A8DF332BB5E02D
+:10541000B6F513283525B825128FE50D311307EFA2
+:10542000D7DE9D9ABF01FCDA81FCCBEA54F5AAFED7
+:10543000E507E99EBB5343E202543E86B54732324C
+:105440002AE6403D2137CAA2187F3E6AF2A7FD1422
+:10545000FCADB76402FAF4969679E8074C6B59EC08
+:10546000A9A2F3E93D70399398405E32BC37A63269
+:10547000BBA6299AD9974DD1B41F2A6FDE746A8DC5
+:10548000D07F77F6F3EBC7527EA9EB905DE02F4615
+:10549000665D1E05FC3F6DFCF34F8EA5E37C185046
+:1054A00030FED069A37448DF7F4824B467CB8E45B3
+:1054B00078F651BC7CDF59DE961AE29F7CDF598575
+:1054C00065524B1D2BCA1F2BAC8C2F3F24FBD37E68
+:1054D0004AC7F1364B68079C6F4E89033AE834D3CC
+:1054E000F587D0E3EA5405E96F35A7C7BA4B320612
+:1054F000CD3ACDFEE4665ABF4EF19BC10FACBB6402
+:10550000C1F7300F984F67A4BE9FC7793F8FF7F55B
+:1055100043E1300EEA19FB51D87B89ADCF8887D3A0
+:1055200029953F85F57CDFE96E43BC51F905FAA268
+:10553000ACB8EB04D811D7D64B6E09F452D365C979
+:105540003F9AC2F3EC3E33FAF767C13FA4E39DDB19
+:105550007770C85CFA6CDCFDC758F007B7707C9DAB
+:1055600053BA63617ECB5EA2FE0BDA43FE21F76085
+:10557000FB79258FB161ACA1FA7AECB707933D2C8A
+:1055800078A8427C4ED8A53759BD3E985FE72A19C6
+:10559000E508D5E7226E2A81FC9EB44F7647C6F611
+:1055A000B7575F4E350B796B023DF6809D8D33907A
+:1055B0003C28BB94487C21F2A24CF1CB30FFB24B8B
+:1055C00043F0FDB923A94FD402DD12B30BCD4485BE
+:1055D00074A1BD2C11F1D7954ED7F33A2FBCB1EF82
+:1055E000C2ED37223352BD48EB7CC7AF25A1FD0C7D
+:1055F00021D292A05D38E9923EEE6AB4A3859EADB9
+:10560000E82C5A9B4C00EEEAED37021D1E51907FAC
+:105610008C76767560F200F6F406A4A33DFBD2A268
+:10562000212EB091F379D3BE0B93413E2D27FE3B43
+:105630006E4C82B8836CF793ABC5BBD6FE6E121D61
+:10564000FF8D80A2823C7823D0652DC4B209E31C73
+:10565000656F97E501FF7606941AF05BCBBEEA8A88
+:105660009E971FB46B3A2F9BF0FD1B970FE07BD1E9
+:105670006F6720210FF4F36E13F3B7BB0EFF2D1AE3
+:10568000E4EB1B97CF27A2DF2FEC92FE7635FA01D1
+:105690009536B92F0E1D6ABF13B9ECB815FC8D38BD
+:1056A0003391110FCC1FED67977C40D6DA487FFB12
+:1056B00044C01FC812F8A69F5D1D84B7CEBEBE921F
+:1056C000CAEDE59164EC15B0732F272E057DDDDB67
+:1056D000196D5F8DF1296657F4767DFEB3A9F0FE52
+:1056E000A88CF1B6DECB32F2D581D7978EEE890940
+:1056F000857B2BE2EFE2B0AFBE7C95D6BF78280A5F
+:10570000E3EA4471E5858B9F04E3C9FEE126273C6B
+:10571000BDC34D1390ED305EF09D60BCC09186F12D
+:1057200082C0645057999B4F5A20DEB231D5333432
+:105730000DDBB747C3BA174531F9E42515C9D4784D
+:10574000222F1D315500BD14AF5211EF3BCDD4C4F3
+:1057500002FED8CEFCFB9D54DE825FB4B8BDCD9274
+:105760001282E7C51441B0BED366EFA88490F73B20
+:10577000D2583CE1F4A125CF019CBC7F8A2019615D
+:10578000ECD387D2983CDC6BF14EDD05F53E36114B
+:1057900018AFEBF06F0E0FA7785E7C422D023D3004
+:1057A0002B4DC57A1D4777B60EA7F53A3E00ED4959
+:1057B0004DF26DF5B2898EFB2A5159DCEFB809E73D
+:1057C000DB172725EE4458EF1D694C8EBD7A84D136
+:1057D000AB18FFD528A6EF26A731F95296C6E26E80
+:1057E0007B8E5424CE45BED22601DC9A4EF5B4C63B
+:1057F000AAC138A1B00F271EDF33B580FEEFC4B3B6
+:10580000263BA04F3DBE5586F5AAA7098997FAC742
+:10581000B1687F53D21CC1FE5E3DCBFAA3F33800C2
+:105820007C175845EC5B91EA3C8FE7D3F2ABDD4A3D
+:10583000C2632AE203F581C083588F9887DA4EDC71
+:105840005B629045DC7BAE168FA67E27F0DB382EA0
+:105850003FDF4D75DF95C6ECAC514077A70F45A1F2
+:105860003DB697C7B589B37E34C04FE0E97BFC698C
+:105870009CCF40E337733A10CF9D66D58BF4F0127E
+:10588000D3BB3B6D7E6B1AC8BF57D2B0AC7ABDD1CB
+:1058900085F47B5347864B56919E9B19DD323ABF68
+:1058A00089D3B9DA1EB0A484E06160F9C6E0DE47AE
+:1058B0003F4A3BD255C70982FCB664C77D2C0E49CE
+:1058C000FCC98C9FBCC9C05FC0178CCFFCC324F639
+:1058D0008C053E99D8B9654D326DD700749F1F84F1
+:1058E000830A7C017C26D6696376F2CF78597C6F77
+:1058F0004B6371C76A393FAEE72AF1BB37563A8925
+:105900001212BFFB199FFF62B201EDD3C597DBD026
+:105910006E559BD973F103EC99B9B9DE02FA60F1C7
+:1059200026C91DCEAEB673FC9DE37C404C51C389A5
+:1059300033F8DDC1F9E0CCBE270EC23A29BD3E07DF
+:10594000F0BFA163C3D3002641FF67B699B1BD90F4
+:1059500023A2FD36DEFF4BC719FF4CDC66AEB89BB9
+:10596000C27BA297D8219EFEEAB6ED32C8F75781D6
+:105970003F5298DC00BD7CFAD063D13F003A3869D1
+:105980002210B7DF6B218B7687E0B76BCBCB3A79F0
+:10599000B064C7AAA9D04F694F82047A40C8018178
+:1059A000EFBD16D7149427D30DF2A48AB53F06F0A5
+:1059B000A4EB7A82CB93276AA83CA1AFE2B7C54B90
+:1059C000D0CF5E1E2736C2AF8BE353D0E38D41B9F3
+:1059D000DBC5E46E4F2C74BD7CDA798CD3F68DC3B5
+:1059E000E9EE892A41772912C091DAF9A67458376D
+:1059F000850FD03FB5F3EF9D918F5C7A44C1FD21B7
+:105A0000BEDF44560BFB47C7BF42CEBD9BAA1D87D6
+:105A1000F14BAA9AD780FF9158EB45BA3E2369A370
+:105A200013A8BE3A037C1D462EBCCAE5C845B33652
+:105A3000DA1EE67B908FC870E083454433C13AC8D4
+:105A400066C90E7015DFD5CD8CDE3EE7F011EF3F55
+:105A500037C06B12C02B0DE1F539D753162B9D6F54
+:105A6000A68FE9292255203D12D32DC381DFCE9880
+:105A700009D2CF192A17016E8BA3F4FE8958D737A4
+:105A80009CAF2EC6B375ECE5E3FE097C9EF1580F82
+:105A9000ED0A6FB909F76B813E90DEA627A0DD45C0
+:105AA0001D2605F9BC6F3FC22F4B4C1EC8300F3B63
+:105AB000F8751827DA82FD2EDDB505E926BEC65E2B
+:105AC00004FB474F28AEC8F890786FD7F68DE84FA3
+:105AD000023D015F0E448F8B801E49183AF4513A03
+:105AE000A4ED126A9A118F14BFF674DA6F7C9526B2
+:105AF00003DD18F12BF619053CF61AF62567A633D7
+:105B0000F8A4A433FE54B9FC1A584FE8E52DC59704
+:105B10009AEED0D337E04DF05B4C3A934F03D1F976
+:105B200043E976ECB7F5C3794E9017623F4AEC2F04
+:105B30008BF1C7A6337A1C683FE99CAA15A51BF612
+:105B40003BD5FC209F5473FB71C5F608DCA7DF0D25
+:105B50005F00EE5D51B82FD1270715E2067C96A7AE
+:105B6000A7E07802BF6A8B85A4D3712FA6D477C52E
+:105B7000D04F37777B6B0BE83A765BBC33A7A1DD60
+:105B8000ED9A02FD4FA935D9218E1DEFB64B1007B6
+:105B9000411207BE38CAC621AA4B37EFA91CEE0234
+:105BA0004F020E03E9AB81F0F310878F837F37F24A
+:105BB0007506FF6E4E67F47F6DBEF6CA40F7B144BE
+:105BC0005B2DC3FCCB981CEAE3EB3282FB8D0BD23E
+:105BD000F57C2DCA61F87A417A285F4FE8D1F33518
+:105BE000B570B93E45FE726C33BB993FC9F8EC62A3
+:105BF000249BEF8A74A6871CA03F28FE1C5EB6EF8C
+:105C00003A95D319A5A03900EFB66D11B89F20F8C9
+:105C10003E7626A930C3FE2DE81BA835533B7113F1
+:105C2000ECDB3A2D2AEC239F3107104F67A8A3DA4B
+:105C300086F8F4603ECA994337307930AD4FFFB8EB
+:105C40004D507E7F04EE2754CB9D48D72BAA09EAFE
+:105C50008FAEEDA548078B6A5325A0B3253BE225FF
+:105C6000F89E506537C92172B1B445467AA274BB1B
+:105C70002E3D047EA5DE6619E0323A51739AE3A9FF
+:105C80009EDD367546685CE8495A5EEF0CC685684D
+:105C9000F96731C3061F17DA987ECBCFD68DA04A9D
+:105CA00024CDFD148C7B4EF56C04BC94243763BC6E
+:105CB00073B079104D3CAEF4C1236F6DAFA7EBAE5E
+:105CC0007B34F0087CBD17E2AED9903FC0E2AE4D08
+:105CD0009DC7301EDBC9F9F9EF4ECF0B30EEECE675
+:105CE00029FAF86B6070E32671BE251F10847F923D
+:105CF000A75986B884900BFBD21384FF28C1FE9B62
+:105D0000E007902B607F8A3C088887D9128272193D
+:105D1000CA71217A757D2DB583C2F0D9C1F498B0CE
+:105D2000729074FEFDD73FA0FE7E137C6272F1601C
+:105D30007A88DE7FA2F6E3211A8B7B60BCE97EEED7
+:105D4000433EB7DAF5FB2C9043EFC828FF8B222C9B
+:105D50005E09F687DC44B50FE1FD019B744A7E1BAA
+:105D6000F53F9BFE261137C4CFFE26E3F3B91F791A
+:105D70006A52C09FEF30B9A82500F91448C7AED1C8
+:105D8000C467A5F4D7CEF76BCB0FC6B8CDF47DAF03
+:105D90006445F9D7BB3FCA0B7CDD6B33615CB9EB63
+:105DA000B50884EB85F428EE5FFB747EB8D8FF88D5
+:105DB0008CE8F943196DBF3592F5BB3592C5E9B64C
+:105DC0003E9A1907F6E740FBE3652D6918E713F1E2
+:105DD000C7D4806A6249646C1C2540707D62BF7CB8
+:105DE00013E46B140F9CAFF1D7F4BE7C8D00D0533D
+:105DF000D3AC9EC33047A31F36E4E8C7FBA19F2165
+:105E00002D2C4CB0E9E80A09D6B9A92EBC1F26E80A
+:105E100068138F7B85E4457CABD32FF509D1A9218D
+:105E2000F253B47B9AE7459476CDDD0B761EE5EF11
+:105E300073A1FC3DB5E091C870FBF39E961F625CB8
+:105E40007420FAF79888162EEE373A83CB5B25300C
+:105E50001CEDC1372E46A961F2253CAF991C0017F5
+:105E6000119FE93FFE8F70FC61197DFB7FC307B373
+:105E7000FF679C77B7998C0CA757049E8DE38569C3
+:105E80003FDB15D2DE6321DAEE98FEED84DDEB9187
+:105E9000F8FEEE8704F5ABA0130AF77119F47BE165
+:105EA000DBF3C64541C2A1B559067970A1A32B19F0
+:105EB000E25603F987623EF42F235CBC858EE70926
+:105EC000878769194CBF7ACCCC0E95CA0FDD03F3D6
+:105ED000F27C65912242E86C22AF67DCC7ECFCEAF9
+:105EE000BFC7A19C34FB93C3C1CFB8BF3911829304
+:105EF0004CDFB171395C5ACB49454412C60BC856C8
+:105F000015FC40262FD516827C3E4672E3BAEB2064
+:105F1000E8E2003AEFC63CC80B4765AC57789FEA09
+:105F200003BF89EA85BB017EA544DB6B4A0BC24BEC
+:105F3000D043EB8BD44ED1C5AD18FF08FF75248F2D
+:105F4000FF5055E30EC5DFD059945443E4FE30CDE5
+:105F50004A9490385BF222BBAE3CB2D9A9ABEFF4C5
+:105F6000FA25E02B678BAA7B1F94576CBD23BD6479
+:105F70000BE8FF4DA407D7378ACF678CA4217D5C3F
+:105F800038FA4902C4257FC0F987AEB705D7DBA22E
+:105F90005D08A50FB1DE6BADEB8395743E94EF3FCA
+:105FA00002FF9C3E673F70521A8A70B7833AA07A0C
+:105FB00091B51BF9F031F423473677A31D3FA76550
+:105FC000BF04FA8BCA0D6CB769A5159FCFACB4A3FB
+:105FD0009F2FF03B82D6833C256F05C9867D81814A
+:105FE000F4D3C68C41EBA78D1961F493C91A7813C9
+:105FF000F6C11B3B6515E860CDC30998FFF25CBB99
+:1060000084FB2E073B59FEDF73AD51A847C4B85F30
+:10601000BE1487FB3F5FF27D40D2158FF4DD14CFB5
+:1060200071B2361EF7C97BF93E6447BAF61F1921D3
+:10603000F2E0B9CE6F22417FE4893C5B83DE01410F
+:106040002CD1F6E013011DB7A614AD93615D7768FE
+:10605000E32265E4F7DD8C5E997EFAE5AE0A9316DD
+:10606000829F0B1D5FCF39A0F6DF5F12FB50627F6E
+:10607000EA4DA7F66A4688BC36EE3B19F74BE45862
+:106080002BE669BBE42897ACD7B748876B32983EBC
+:106090005DB33F0AE1B8262306F77BE97C8FC03861
+:1060A0005D360B1946DF5F381183F5C4FCE97C0BC4
+:1060B0008F86996F932930E780A49BEFB1ABCF57C0
+:1060C0009FCF2CE6D7871F1E2F906D0AAEA3974453
+:1060D000B900AFED16D7090DF4EF3B512C7F8AE3E1
+:1060E0006F39E7CD5E8A2F89E2ABB7E34224D0F166
+:1060F000C174ED24CC431E198805FFE560E7851CBB
+:10610000E09781F60D958C8ABF00BE20FF0FF166E7
+:10611000D72EEC228C2FB5ABB4CBC8A8380BF5AF7B
+:10612000033EDF5C0F7C9A949875A1F697C4E5B3A3
+:10613000911EA5CEFDFF03FB01941F311FD53B8AA5
+:10614000F8D650B8B51670BA9C4954169FD1D34BA7
+:1061500047BAC79CE908F2F155E01309F57E99EEBC
+:10616000898627CC23792CCA291B94A95EDB6B492D
+:106170000DDA5BA3D398DC0BC413CC5F31EEF7666A
+:1061800064CC48CAA4704BCD564DF6FCEBE2879127
+:106190009957859F1FE9A291C3A911F619295CC8D7
+:1061A0003EF3595DBE80010E07D33D590C0E413AB6
+:1061B0005BA35E151E790C1E5A21ACC366A6F402C1
+:1061C000409950EFC4BC18D57D37EC7FEE5CC5E03C
+:1061D000D0FB2283C3EE2E13D2F516928BFC996B63
+:1061E0003A3F07FAA7F26702F453DCDD66827CC20D
+:1061F0000C9F6A82B8724E77BBC97475BA2DCB44B6
+:106200007DA14DCA64F6C5FD8087BC5D2C1E73154B
+:10621000BAADCC1C7F5D70AFCD1C3F783944E9CA64
+:10622000134A5783CD4BA2F4419213FAF747480F14
+:10623000C6FDF7BF1281F27EF91E09E5D3F2D73F02
+:106240009B03F05DFE9B0824CAAADF44E2F7F3FB40
+:10625000D8F72FCBC3EF4FDF9599807AB6B1FD3ECB
+:106260004FA87E1776C34FDDE7EDE972709F2F715F
+:106270001A3B6FB22652E49BB2FDBE584E6789238B
+:106280003D6ED05389D52C9E141BB310F7FBFA9F9B
+:106290002B617CEBE0EDEC7615ED07E33913398AE1
+:1062A000E5E539C8FAAF004E8935FAEF8E981ACC79
+:1062B000C77318F6FF04BCBD99DC6EB61027CA5927
+:1062C000C33EBF78FE2593DBEB6BE34DA1F204F4F4
+:1062D00000C07585CD8AEB5EE12089B51057B029E5
+:1062E0002E1CCBD08F78C6BB4D440D3D2F5313458C
+:1062F000D410BBC8E149D09587CE1AAEAB3F4C4B0A
+:10630000D57D4F5E94ABFB3EB279ACAE3CBAE506B0
+:106310005DFD140A80D072DABA5B74F533DA66E890
+:10632000CA599BEED6D5CFF1CDD57DCFDBB144F7A1
+:10633000BDA07D85AE3CA6E307BAFAF200F6B880B0
+:10634000B32CEC715BB1067425DBAC52A8DDF222F4
+:10635000AF571E6B45F83FC2F5F523360BEAEB4706
+:10636000B8BEEE72945C755FE69FF5DFDE16F4C092
+:10637000EDB50A1E2FFBF280C504F4B8FC20A58BF6
+:106380003168AFBD9DC9ECB5E9F5B8FA8005E45EAA
+:10639000F700F920EF65723F43A17E4C187FF09320
+:1063A0004C5517B713FE03956BEF73FDC2FC26D255
+:1063B0002C831C1072A9299AA09DD7146DC73C9FED
+:1063C000DED84B99C04F545E7D0CEDBAB39F683E4A
+:1063D0000072AA3302E5D45BD99FA03F7E4BCB422B
+:1063E0006CFF62A69DE1C5E252ED28A7F4FAF7A87A
+:1063F000B9BB16F07074BC4C56811DE42A1D4AAE20
+:1064000002F777C0DFA676F2B62C82FD5ECB5F3D49
+:10641000BA7211E64D0FD4DFD1A2488C9BD6025D33
+:10642000858C1B9DC5E099C19FD41045BFF3DCAF9F
+:106430006D3E2FF84B63DF8D2536C893F9E3382F77
+:10644000E823D27D3FECDF7BBF8EC1B84E6DD1BB60
+:10645000E35661BEA89BF97D13D89A6F7AF9ED587F
+:10646000F0D76B771F4CF286E0D1E8EF65F0F511BD
+:10647000A52713F34E5F3D3344A5CFDA570E25B160
+:10648000B8923EFFC5E8E7D7B62CD7D167E3A54859
+:106490005D1E4CA3D26D017C345E8AC1F7BD99FAB2
+:1064A00038C080F01A243C8DEF053C8F169D1905ED
+:1064B00071FA2F23C3D3F16DBC9E281BCF2F0C94F0
+:1064C000273F81B7BBE09A3814E24CB5167FFA60DB
+:1064D000E212024E6F5D6EC07311BF1EE05C44514C
+:1064E00016DB37F975F602CC6B9E686DAE04FD3D88
+:1064F00091C73FC3E4355767819D7BE25F93D73CEB
+:106500003D8BE387E70D0FCF52C3E6355FEBDCC968
+:10651000540B954B61F82BB70F7E7F9A398ED2F1D1
+:10652000FDBF30DB615E0DA0F320DEB2C58CF1D77C
+:10653000B72F471088877FB6D9FC3CE4BB2CFAC53F
+:10654000C1114F40FCBB2802F3F11AB69859BCB6F2
+:1065500028D2072187455BBE3704F22EBFA07CBB43
+:106560008CCEABE1170ECC077ABBEBB12180A73301
+:106570009C9F177DFBE33B00FEBB2DF6BC22FA5C23
+:10658000B64BD2E5992FD916A92B8B7C22813F22BD
+:1065900005F3CF552A4F5BB2F4E768C605F7255AD5
+:1065A000B2B85CBD9DCE77F9F80B16C0E3C1C351FC
+:1065B00038EF376264F473FD457FFDDD185AAEFC99
+:1065C00056C1BC7E637E12218874B290E71156BE1C
+:1065D000A2F49D0380B27F6533F2096D17531D92BB
+:1065E0006F5DF973E64F5746B23CE001F3960CF944
+:1065F0004AE29C45BF3CA5E0390B9D9D22E8E6A9F7
+:106600002C3D5F1F3CCCF292161EE576E535E4E6A4
+:106610003BB08E0CC0D75B75B06FF93687C6DB9781
+:106620003F5B3B8C963F9B2041648E7C76393CDF00
+:106630007C26F4129C0FC80EE2679A6B715F19D822
+:10664000F2D609F7E9CE2D0C5EDE5C5D9EDC956529
+:10665000C1F18DF2DD48F7FFBFE47B6DD1A1515E42
+:106660001B3E5F80E7D9DD4C3E1AF9DC28CF730D65
+:10667000723028C7659D1CCFE5722028CF2DF89D6C
+:106680009A69B81E6F89E25B23A1FFF31ED07D7E5D
+:106690008C9A584E9BACB5A7466B57F747FF2FD443
+:1066A000EF4AD13ECAA27C34FA97B955608CE7ED27
+:1066B0006A3301FFF60E608714A41AF282787C48D0
+:1066C0007C3F9B555E00F9AA7B54F614FC594C990B
+:1066D00090EF2F9FCD62FBCB3F01BB67F97F5E44FC
+:1066E000FEDC12A5391558CF708B2B74FF563C2F4A
+:1066F000727E1FF87CAD3EDFF9743A6178CFCED65A
+:10670000EDCF807F8FF90107A2106ECF3ADD9701A0
+:106710000EED4EF7B730AF32A7FB1F59217859CB9A
+:10672000D7A998F4716BF12CCD16F4EF413DBEA0C2
+:1067300022BCFC4DCD6679C1E54FDF350AECCEBFFA
+:10674000ECBF7B14C8C7AEA74AAF6A876EE0FCF9FE
+:106750006F5CEEC7F3B8E34F816F683901E296B41E
+:10676000FD028B27333EA41F73763CDBEF2EFF83A5
+:10677000278DC2E5D47A19E5F7A9181667FC2446D7
+:10678000A9D9C6DB25E9DAB179CA40F7948F951803
+:1067900045775EA21468DA31F03A4BB3991EB51012
+:1067A0009715DA5B0EDC6205FCCA92DBCEF2D219D9
+:1067B0003D4CA423003DFC98CBB1BF3BB5A26C6C13
+:1067C000C7F4ED44AE6F9518837E1D115E9E89E778
+:1067D0004B4E7709F473A7D35D9AED80B817C903C0
+:1067E000BE698F0A9FE77313C7DFDF853D4662D01E
+:1067F0006FC6F164DC577567635CCB5301FDC1BEA6
+:10680000AA59023EB0F3FA6E89C52B3C37C377E232
+:10681000744BD328BC4BFE4CF03CC7DE231512EC66
+:10682000FF2675574920C79238FE8CF3E8E170DBEC
+:10683000C3F325FAF31DF32B6670F8EF513DC85FE3
+:10684000AD299A13FC55C8CB03BC1AF32C7E99CD05
+:10685000F6D5B644F5E0FEA0F76E82F97743CBBCDF
+:1068600012E40F25D7B695538C93F9D9CC9F4FA836
+:10687000D19CE0870F775AF09E8AC1F25B7EBB1BEA
+:10688000E325C51A3BAFBCA9DB1B9949E735A45BDF
+:106890002BB7D0677ACE105CDF50D2BC8AF909AA38
+:1068A0002EBFA958ABC07D7231EF92F9CD6B2C2A67
+:1068B000E6C3ACC80EF16B929779C3E63B19F7B902
+:1068C000D708BEE4F908C53CFFA078DB53984F50C9
+:1068D000BCED66450A91339BB2CDB8FE3387968CEA
+:1068E00086F50F94C7DA96CDF0F0FD6C265F06CAE8
+:1068F0001F5BDF2717FAE58FADCF7684E4D7349E90
+:1069000047F9D798CDE4FCB3905743E1FAEC7C917A
+:1069100057B34582F5EEB5B44FD905F35A6EC23C74
+:10692000A6BEBCA2F92CCFADAF3DE417D1F7CF2E58
+:1069300062F945C37C1B705FE26224CBA3B8B83D0B
+:1069400082C0B9A467B76D1C02E7109FD54C6807D9
+:106950001AE70F0782785EA419F225018F20AF0491
+:10696000FEFAF28F78FE5ED7F69771DE623E9450A3
+:106970002C00F7F41C36AF253B764F01E21FBE2CEE
+:106980004182B89D98D7B5E4FE4B9C2F064B872FCC
+:10699000E430FE08A31F5FCDBE3EFDF806E089EAA5
+:1069A000C703D0EEBAF523D78B424F8AEFDD9C2E7A
+:1069B00066660FA81FBBB3C3E84715F29E31EFC848
+:1069C000E4DA1E065F3378BF37BAB54AE0E7A2348F
+:1069D000ED4FD0CFC409BE8310072DADF11E047E4C
+:1069E0002F96F879EB294C0E24F690FD10838B3FFF
+:1069F000D1E3863CE5AA6C966F71C36937EEB3C7E5
+:106A0000798804EDC53D066D09ECBCB371FC499C69
+:106A10002F4C4F06301F2EA9337C5E6A412AB3D714
+:106A2000A8BC3C0B702D194DE5694A7F791A067F89
+:106A300017A07ECE2EFF01A835363E3D1ACCAAAB5C
+:106A4000E0EFAF0C7FEE4BF014F8CABD22EBE2781A
+:106A5000025F57F8FC6FCD70FF03C639CCF97B207D
+:106A60003CC6E650FC8D07FA66781479C03B0D767B
+:106A70006A450EC3CBE41C7D5C2804DFB139E3FB1F
+:106A8000E35BC8F1BD47F6C880B792AAB635800768
+:106A90008AD7A41CDACF0D65FAFC4F235E853C34FF
+:106AA000E2D78857910748F1313A278CFE12FD183A
+:106AB000F558889CE0FBCE6A5F7E07D8CF224F5CFA
+:106AC000AC43F0CF240E8F1B35ADD2C2E8B410C654
+:106AD0009D38CB77D00C74BAC87BD0124AA78B09EB
+:106AE000DBAFE2F348EEF1E27A869DD0CAE179C3EA
+:106AF000693FDEE331B499AE8704D733B2FB38E6A1
+:106B000063C2BE2CC49BF61E3980F31ED1DDC59E28
+:106B10003C8FC8A86F83F9B7AC9F17B8FC6A3DC714
+:106B2000F2F85ACB99BEBD37C35D99837CECAE8237
+:106B3000F9AFC8705743B92095D14D6C8EFB6628CC
+:106B40008F1C40DFDF9AD3B74F3D1DEA253D40BC87
+:106B5000E21E1488C327412410B6F09BBD9285C263
+:106B600035C94DD0EF1C9DA8AD82BCB7C044E282B0
+:106B70007C80B83A7B39C02B61916B3FC0B3F51C68
+:106B8000BFCFE53E82E7BDFAF2ABB454CCA700FE1E
+:106B90000DE5977A3E8FFA1CC607D4DE9993C3E6BB
+:106BA000A5C1BC84BD23F87220FB2584AF1BA0FDCA
+:106BB00075F0F5F29CEBE3EB15398CAFEF8776D7E8
+:106BC000E2EB1FE4F4F1F543D0EE5A7CFD28E7EB4D
+:106BD00017AEC1D73B78BFFFC5EB87E1EB47C3F1E9
+:106BE000B5CAE94EF0C59E2363A3215F601BEF2F5A
+:106BF000447E6F80F6D792DFFF049F6F867EAF657D
+:106C0000A78A7E05BEAFC527B1B91E8483B0474FA2
+:106C1000A733BC0BBEA7FCF29F007FCA2F3B39BF36
+:106C2000FC92F18B8AF58CFCD5A7EFBA4DFC1E11B6
+:106C30007B7468DCFBCD9C7EFAEEE59C30FA6E241A
+:106C4000E1F0AA61726404F1CAB1D06FAD1DCBF658
+:106C5000B37674F3634F05BC00B7F77298BD513C2F
+:106C6000403CE1779C4F92BA2B50BE50781ECA0927
+:106C7000D16349C43E15FC9CCF73D8BAC64D701F72
+:106C800004B964777B309FDB91CBE022E044DBBF2B
+:106C9000134EEEEE037CE4F7F71B8C7838C8E7FB65
+:106CA00039A71F63FF42FE40FF05D8BF6A82FE4539
+:106CB000FB3F07E5D047B08ED2079A65585712714F
+:106CC0004783FC1172928CA0ED8BFBB7FF34D8FE8A
+:106CD00053584769336D9F1F6C3F92F8315F2761AE
+:106CE00011955304EC7717DAB3EB55CFB91C9C27F9
+:106CF00061F2AADC84F2202BDD8D7C174EFF43FD70
+:106D0000EBD1FFB01ED0FF83911357383D81FE8732
+:106D1000713ECEBA86FECF65EB8ECBBDBA9C88CFD6
+:106D200065FD3A7207D6FFB961E4C41ED58DFC1427
+:106D3000868F12721D10677127423BCA4749501651
+:106D40007A87B61B02EFD7AB0C8EEB6B4DD9685F21
+:106D5000932857387F262D3766B0F945697C9ED732
+:106D600095FFFADC8F7A2C006F91A722C635E6BD1D
+:106D70000A3C2EEF94C6415CAEFCE0658C93F4EEC9
+:106D8000FF1BC649948CB9E360FCAED758BC44E401
+:106D90009588F157703FB25ACE6F8738EDF91D16BE
+:106DA0008C7FCA44DD5846E7D374C44C7C2807D98D
+:106DB000F965B14F6BDED1DA0D71793309B9670727
+:106DC000F59D1A0774693EC2EEBB2149EC7B33B1D5
+:106DD000AE62F730EAF769E3DDFA7DDAC41AFD3E08
+:106DE000AD88232E256C9E0E8F7EDF76E82CFDBEAF
+:106DF000ED304DBF6F9BBC68AC611F57BF6F3BBA96
+:106E0000A5C2B08FABDFB74D5B37C3B08FABDFB779
+:106E1000FD8C343F5D46D79D2BEEFBF1BABBE15CA8
+:106E2000F47C3EDFAC4DFA7DDD2F76D6E07D21F39C
+:106E3000797C3BC7A7DFE75D2A2F433A266DEC9CA0
+:106E40007333FD07E0A690C0E164C83FF0492E3FD0
+:106E5000FDDCB0497F0E7A71C7166CB7D8A77FBF2B
+:106E60007487BEFC402EBF0786C7BDFBD3410CCB49
+:106E700063D8CCE2FDB237CB40077A7CFC6FE942A5
+:106E8000E57411E1D4D345A4AAA78B8637F796C041
+:106E9000BA8DF08DCED6D38B11BE36979E5E045C34
+:106EA000A99EE4F9386E5CEFC20E893C23F587EBAE
+:106EB000A2CE0DAD700EDD0857427CB8EF6C84AFEA
+:106EC000CF00DF73AAF63CF0DF858E07F0BE1FA26D
+:106ED00069E3A0DD55F263FE83D51F747E4C3BD47D
+:106EE0000FFAC9FAFC985EC8E31A430691C775F019
+:106EF0007F20AF2382CED00CF1C6092E6BF8BC2DBB
+:106F0000EDF55CD4336E82F19E3F10D71A5A6B8D2B
+:106F1000AD24EF1A718103B9684769789F466937D4
+:106F2000CB73234AB71DE2BFE1EE6F349C6B3A0A84
+:106F3000EDFFD9FBF184DD48EDF43FE632BDFB2ED9
+:106F40003CFBEC746EB7097B7BA07EFAF25C0678A2
+:106F50004A0764CCB30A4851AE70F70D9DCE95C276
+:106F6000EA0DAA274EE73A42E25BDFBB7018F4074E
+:106F700085F717F0DE66A3FA5B1A94FEEE05386D0E
+:106F80008C8E45BA0EBC29FBB26883F356350ECE03
+:106F90009F1BEF2711794FCD70FF08D52765E7B309
+:106FA000E3AE96675066B89FC6788F47EB589E67EA
+:106FB00092C7D6F96B7E8FA0334FD29D9711F1A85F
+:106FC000A6752CFE0AF70E7686F4E3CC6387566E20
+:106FD00056CB9D790E8877B178616B8A847642AB07
+:106FE00024A1DDB039BDC29947FB3F945B3E14EA52
+:106FF000D9F9B84E88458FC7F33E381FD5705EEC7F
+:1070000018AF7F2CB7029FCE3CE16FD97301FF13FD
+:107010005537F66B91C3EFAB8FCC63F64F35F0B4B9
+:1070200023C84FD7734F8325A9FF3D0DC6FBCFDC87
+:10703000D9F62E5007C67DCF17AF754FC3BEF0F7F8
+:107040003400DCA31382FC5092A7BFE7AC23AA074D
+:10705000F741036FCBAEADA4FFBA6FE6785CCFCF3C
+:10706000853878FEF728BE9FD2BF3E83D39601E2D3
+:10707000BD13D5F26A80F307E99E9B010FE29E9D46
+:107080000E8BB606FC8FC04B04E791ED2307A05C86
+:10709000E055318FBC35C51B8DF7011499D09F5732
+:1070A00037B51D8C4CC273B609921A942766857841
+:1070B0006D94CE16C2655D60DFF5CC3D60A3DF1D2B
+:1070C0009B6F93E0FE9636D256190B76D766123632
+:1070D0003E58CFE9696AF9018CB33B02ECBC5FFF13
+:1070E0007A26E1276AB08ED280364E4A0DCA251420
+:1070F000B9E03F75997CE1E2B559E9950BA15D8155
+:107100008F848DFF55F37B66EA54CF32ACB7CF8FB7
+:107110007E518390EFF34D04EE37BC9DCBF3DB370C
+:10712000B3BC5C72F9CA15B924787E8AF64F403E2A
+:1071300035CCB4E1BDB10D9D2978FF16F14878CF6B
+:107140004B53E7310F941B8A8BED106F76BF4F24A2
+:10715000B8970DCFECA11C54C8A742DFA2FD9084C4
+:10716000FBFD33385D8BFB94A81E591F4DE1DEB04B
+:1071700079D501C8EB7EF779DA07FD7442D64EFC6B
+:1071800090F6FB5DAAC45AC6C2532175188F766269
+:107190003F33793FDEBFD171ADC171BFDBF926AEA0
+:1071A000E7849978AD947ECD156C68F30FE230DFFB
+:1071B00058E4AFDC616DAB063DDB6B0914C2F9A985
+:1071C000DED7DE1B09FBD41FFE9F0B36B08FFFAC52
+:1071D000046CF0FEF4C37FB4C1FDC81F3E2CE3BEB7
+:1071E000DE1CAE7704BC9FE7747E31CFF30CD0E792
+:1071F000BD2BBF2D09CDA3272D0EE49FC53E1953EE
+:107200001E04DF2DDD110D16515FB9B13D5157162A
+:107210007AA411EE6B0D43472738BF2CDEB5C502AB
+:10722000F70B5CCCD376C1F8A715463FA7F7D97CFE
+:10723000707FA298CFDC5D4516B04FFEDC1941FC93
+:10724000A00F956E333B4FE6AE95283D681CEFC608
+:10725000791E7E3D1AFB5BF014934FF574AC160A51
+:1072600057AD7331CA21E33A167CA84E86731C0BC6
+:107270001E9508ECAF40FD8729DEB4961F639EA8DB
+:10728000719DF55EE37D766E948F0D1CBFF3D6E99C
+:10729000BF37743E8EFDCC27EA7AB0A717B419BF6A
+:1072A0004FF90CEC9F06833C7B278FDB5B25A414F6
+:1072B000EE9D39604D8BBBDABDAF6757DA91383F31
+:1072C0005F69C5E7E995049FCFE4A908F7659DC705
+:1072D0001E04FA59DEB1DB02FD1CF48D4F82E3A3DC
+:1072E000533BA72860774DE5FBACB3F9B94E74AAC0
+:1072F000D979CE1EC053558CE13C275F771DC7035B
+:10730000B126229DD5C17A0BE1BDF275E87ACE1F78
+:10731000498BC17D3AB1AE52BA2E79F0EB12EB1126
+:10732000EB13DF1B65763FB0B19DA0F36738DDCD71
+:10733000DF765BEB700A8A35AF7D36AA87F9A968DC
+:10734000DF5772BC555A1F47FBBE92E8EFA5A27FDC
+:10735000C7817F05BD35109702CC6BA42B816712C6
+:1073600063F6F2FBF9D1FEEFA3A7CE7F43B8087C0A
+:10737000537E71F2FD3427ECA751BAD2D9DB948E3B
+:1073800074E5056DFAF297E69E51C0EF0D86FBA1FC
+:10739000BE34E45F88E7A5BC540607D53D19CE0787
+:1073A0002C209E56B6EFCACE1F9D56DA0EFF10F85F
+:1073B000701BE3833F73FCB7E47B46E783FE52DC3C
+:1073C0008520EF2B560F939368BDFAF5921DF86B4D
+:1073D000DEDAA2C9C09763891BFB9B9D18DE7EABDA
+:1073E000C8677A646EB39958A8DD3F978E01726EB4
+:1073F000EE3E19F91EF2A6A60D817B26183E1A1F35
+:10740000DD6D19469F8B9A1B98FDE0637C23EEABE4
+:1074100015F427E4FF92F5FBF1DE0DEAB7E8F8ABCF
+:1074200009F2BD0B818F0DEF9B6F463C3411F6FBCB
+:1074300005027E37E573BBC1455C409FDA83362B7E
+:107440009C17B9D6BA49FFB803C625CE1FC940BBA1
+:10745000F3BCAA0E857A1A1DB31BEC48452B85F7A1
+:10746000145EA8A702ABA2F11ECF939764A2427E3E
+:107470009B5D2B053BAAE7FD9178CE5DD0AB586FA5
+:1074800093753DD26B13D1FBA3F5D4F181FDCFFAF7
+:10749000ED8998D744FB2FEC007B63BB19ED092FD6
+:1074A00059E184F3F69E47CC2827E776C4A33F3CF6
+:1074B000772DDB2798BB2B1ECF07527F14EF1116B9
+:1074C000F838B9B6D2320CF19582F7F3900E3D9DA3
+:1074D0000B3CF5F7270D785AB7FFB053EDEF5F86F9
+:1074E000E0E9D400783A158AA715F95C8E703C91D2
+:1074F00087B9FCB9EF5006DC5F75BE3912CF83182F
+:10750000E950E82932FF06CCBF1271AA9AE10C2F8C
+:107510004471619EE285F5E3116F467CD5FC631EE4
+:10752000E285BC6FC3FB8B67A7B17B5BEE9518BF91
+:10753000CC5E33A506F4F9E3F9CCAEF93D955BEEEC
+:107540002C6A8F53B9E5A672EB8F549E41F9DD95F5
+:107550004E2CBFB752C5E79F5666E3F314DF5715AD
+:107560007C4409C10276E3867C26C736E48BB8E109
+:10757000034E302D6AFEF1C7F1F03B0A0EEF943B4B
+:10758000AA471272AB5BAF0F67CDD4EBBB1EB37DC6
+:10759000B213FCDB47D93D4C733D37EAEA1345B5DE
+:1075A000C07968923D2EF81EF94DB5C07DE977D5BA
+:1075B00026EAEADFB12E5957FECF7C15D77D5B4D09
+:1075C0009AEEFDDD7579BA723DDC9B0874AE4E40D3
+:1075D000BE7980E75552079DE1859F23FCBAB974B7
+:1075E000E8F7E97CBF3E6AC6EF467C08BCCEDF24E4
+:1075F000138DF6376F13955F748AA7DA289E68BBE0
+:107600002F4ED8D00F69DD35EE9D09B47C729719E5
+:10761000E30727D726FE04ECA793BB1CB1843EB535
+:107620005699DB1976BC4F49F45BB976159E87A94C
+:10763000F745B8D09EE8F2FEBB28ABE0B7C2248184
+:107640006F8ECB3EBF84F863F1839D11680F9FA6B8
+:10765000761D5C3D7B5A226BE10907E6E3E8F76F94
+:10766000BA1D3EE0EB9A7FC86E27D0D3CE48767F16
+:107670000838C3F4FBE7C732B63E86F4A5B6FB91E3
+:107680007F23D05F98D7C3D647A4B1C980FFD3F179
+:10769000C41D4F27D1B8E2BD8F148AA7C599DD85D7
+:1076A0007EDAAE2EC5EFB893B63BBBCDCCEE97A33A
+:1076B000FDDA69B9F197115B983C710FBDAD2014EB
+:1076C0009EBE425877D670CF87F9B07FB0D057882A
+:1076D00072ED6107F29511EEA72C1AC2D70B7C2030
+:1076E00005E56490CFD87E10156EC340DECC33BB69
+:1076F0008680BE3AB5DE8C7629D527B1B7611C6687
+:107700000FD2F129459D0CEB3EB52E8580DC12E3AE
+:10771000CE5D2FF37B42285D42FD0DB2466D072200
+:10772000F496779DA491A1FDE9E6FEFB4A312FDC9A
+:1077300068FF8AE7979457B5103B62C96BEC7E7E71
+:1077400052DCA3CC2C085D07FB7D05A24DD0E56B78
+:107750002E4BFDED473126B46BE2209E7EE6B88CC1
+:10776000747626B5ADC44949FFACE940C9F769F95B
+:107770008B69DE4F155ABE6FB416554097B4D4B41A
+:107780007E14F84FBD9D9FFC04EEDDFBFC45331CD1
+:1077900087274B762E1E8D711F6E7FF7975BE2FE5B
+:1077A0003FF730B83F65A9DA8E7A5C854372B87EC0
+:1077B0001FCE53E875FB9312D858E493F1B6C7C0B7
+:1077C0009F9E67389FF28999D909230A989C12FADB
+:1077D000FE1E5E9E6762744D5E97300F9CF07BE5E7
+:1077E000853E10F25AC8FDFC02665F08790D997655
+:1077F00020B716C2ED2D749DCB7644F87C29D8D6DF
+:107800000E705CCCD0441617A8D86E89E5C5A78148
+:10781000971A4837CEFF73B36F61770AB4DFB23679
+:1078200001DB9B5D18A7E5FA05AEB506B9D4C0F932
+:10783000AFB14DF2F9917F989E5CC0FB27A06742E3
+:10784000E4583FFD62D02B0BB85E5D400C71DE3614
+:10785000BDBEF344DB705D4BE8B8A03F83F3A2F6F6
+:107860003385DD42CD77783ACE5B72F9C2CCA38105
+:1078700004FC907FD7B88BC5BD8DF332AE63B0F3F7
+:107880005CE8BAAD2ABE38645CC3BC05BC31501C90
+:10789000820701F7855E06CF859D12E2EB2FDC5E45
+:1078A000A37F189F36E2BF8178A6439E42C39354BC
+:1078B0007EA604E941D0C1E2DD3E0BD8CB5F90B695
+:1078C000D818CA07CB36EDBE63A20AFEF331F443E3
+:1078D000EA12FC19A6784212BD2F3D5D73D3B5E3C1
+:1078E000FCFF2A38C12AE07E5A6C47E1B2609BEC6B
+:1078F0008E2CD4D5E379DA5E84D722AFD70271D04B
+:10790000453CAE78AD793629EC3CEFB5E7CBE0F8F5
+:10791000AF9EF7D3057A3B36681F6584F5B7FAEC5E
+:10792000A26BE8E30FCCFE91A08F032315D4475F31
+:107930002BAEF7CA93403F67A0DF3090BC5DC8F51F
+:10794000F202D0D3F4F9E9A6BD786EEC2F4FEEC564
+:107950007D43CB8B0B62C15EFE74D3BC9F40DEFCCB
+:10796000A7BBE6A15E6E7846E865CD12AAEF2B377D
+:10797000D53FF77F804E7744E20985855D1AB7C70A
+:10798000A9FC03B9B889C93FF224938F0DB1ECDE8D
+:107990006FAABFB2A0DE830BB52CA0F790F7A8D7D3
+:1079A0001E9CA795627B62F7B37B21ED7ED05F4280
+:1079B000BF0ABD7B7498D655007A413EFAEE4374F7
+:1079C000FDE7F6C818D36994B78C82DF4318488E58
+:1079D000FFF3F036F5C13B6510F09E0BF0467B8857
+:1079E000C1FBE3750CCE9FAC67706FDD95160B7E07
+:1079F000F0C7EBD2D00EFA785706C27BFE6314DED6
+:107A00006807AB7A3B681D8537D8FF006F3AEEDC1C
+:107A10002E95C3DBC5E0BD8EEBA1F5EC39BF1F5C35
+:107A2000BD986FFAE0F3112ED0EFA723FD0EF053AF
+:107A30004EEF9609ECE7F7D949DC9E1170FE86B44B
+:107A4000FD3BD855FDEC9B0D11C44EFB5BFC920D2C
+:107A5000CFD57C2E950F05049C6DFB6D2C8C171CCF
+:107A6000BFCFAEB954106AD70C123FCB8907F3DEF3
+:107A70009777FEF604D8F570BD0AF8FDCBC539F846
+:107A80000EFD397849059906210A97D50A7430C246
+:107A9000784F8086BF0F7131E3AB392B909F0399EC
+:107AA000A1FB414D517E33C4A302BB25C477E30340
+:107AB000E5B1E504F6B39A711E8E42A69F25B71B69
+:107AC000E38C11946EA2E878CE4215E72BA97616C6
+:107AD00077DC4CC7B505E76B7C3F1D0411E8F71850
+:107AE00013EA77E3FA27F3711A6513FA21CB2CCC4A
+:107AF0001F11791319FC7B4621F3EBF30AD93E439E
+:107B00006F2441FDD1BB21DAB70AD75785F14F85E4
+:107B100030FA5604DCECCA97BA7BCA797C017EBF86
+:107B2000008CEAF9113CFE4B552DB4BF87B7BFA7B7
+:107B3000ED6DDCCFA39ECC2F40FFCE6E8970813DD2
+:107B4000EB85FBAD28DDFD388AEDBF90A43805F844
+:107B5000EA6E2E67EF697BDC03FA68765BB41B9EE6
+:107B6000741C2FE1F1D662D8BF1D6EC1786B9DB534
+:107B7000E74530AFEF757EF23D2B5DDA2A13B35F38
+:107B8000562510CC3B1943CD7888DFD24FFBAE246D
+:107B90005E8D7EF4F1E46510D765F7B579519EC826
+:107BA000265D7919FF5D81BAC2CC3B9F1C41C81F7D
+:107BB000885A00F85E06B0017AA88FC3F8C0AD10ED
+:107BC0005F4E80A782743643215E137BAE8BC173F8
+:107BD000FE2CDE3C9DAFFBBB13883F8EAED7FFA6CD
+:107BE0003EDE7DA7DFE4CFA278B855F1EF07BA36C5
+:107BF000595533F8079E1A692CF8CDCB560F6EBE37
+:107C00004D854538DF6526139BE74312DECB700FA9
+:107C10006572A0CF390AE992C732FC01FD3525B063
+:107C20007B8003F731FA16717681A722DA7D287CF2
+:107C3000EFE1F3A3FDAC8B85F696F0F1A51F160AD4
+:107C4000BF98D99D4B39BF2E15F4B64BCFA7CF02A5
+:107C5000BF001F819D4BE1760F7F0E44EF9B38BD27
+:107C60006FE2F4DECACB831DAF3182F8437FAF45AC
+:107C70008C7B2B7F3E5D988AFD8979087A263C3E75
+:107C800065A29203E8E854DB1AB49B1619E2C524F6
+:107C9000348E25872BF7C91FD315785A02F3613E1E
+:107CA000D277225D40D7F758DA33D8BD12FA7A621C
+:107CB000FFB70E6EEEC2F33A44F77B0AD5720CE6BC
+:107CC00013D549EC5E99DE729BD744EDC50FF8BD24
+:107CD0000EE79BD9F9D0BA87F8EFA0C43D381DEC68
+:107CE000C3BA588B02CF0FF8FD72F7926E5B4A4A07
+:107CF000D03E692D97F9EF6ECCBDD39D0FF74410A0
+:107D000051DEE81E8151255E6E780FF63B665EA659
+:107D10007480E54577BAA9DCE83DC4BF7B6919F0FA
+:107D2000F888A0E746ECAFF729F1FD3E567E547C7B
+:107D30007F9095FF4DF4CFCB1B0CDF5719BEFF9CF6
+:107D400095DF2C7CF04E2FD8B57C1FA7EE0609E5F9
+:107D50008A95D35BDD6A3FC2B9CE74803D2B881F04
+:107D6000CED75EABDE37851E6BA103EE37386503D9
+:107D7000FDFDADCB8DE5F3F9DAF1425A7FC96D9285
+:107D8000D702F2F2B82F93CBF7B079B9564EBF179E
+:107D9000C6D0FEC607E14DFBF9F09FE96775FF7E8F
+:107DA0003E85795D6F3FD35D6C7D21FDF4FE33FD33
+:107DB000EC75E9E723ECA3A963DD5163403E54DD94
+:107DC000A88BFB2DFD912B0EEC2BF20EFB1D93A52A
+:107DD000ABDB478DA3FD2FFDAF57462D0CF1C797A9
+:107DE0005F92891BEE47B824E1F38BFD7FB2C0F9A7
+:107DF000FCE5FBF65B26E7C3EF2FECB75486CC6BB4
+:107E000099C8B3243DCA8C10FD1E37C6C4E506FBD5
+:107E10001D87A5FF7546017C2E35B57FFA0CC48100
+:107E20006E90C2EED7FE95AFEFA301CE8339C63078
+:107E3000F95756EC4E82755E041944EB57AE09BFF4
+:107E4000CF3F670C8B27D6F17B95E795D8AC2A8579
+:107E5000F3F8E36C7F7AE1E694B110E77514548C83
+:107E60001A03F31D305E1A60F1D24E162FAD4BE8A7
+:107E70007E00EE31BDEB574F6D847B4DA76E147CB9
+:107E800042F0F7726A2204DFEDBAB3AA0CE35F583E
+:107E90002E1BF3C246E09B23FC5EF1D9A5055120C1
+:107EA0001F7A52A24D762A4746E4D7DF05F3985D44
+:107EB0007AD364785F1E61CBAC677177A48B11F9BC
+:107EC0009E62F80EF521DEA15958FC4B7B4BC6F89B
+:107ED000975618AD85DB7F1ECBE170D718764FF132
+:107EE00011139DE7D8E03CC4F8D46079A09BF677E5
+:107EF0006AF5B022B897BF25BF7C16D2131FBF25E5
+:107F00005FAB86B2189F2EB710DE0F761E159C2E23
+:107F1000668D6178F394517A0BF11B675445EBCA77
+:107F2000336B13893B340E3B3359579E5597A6ABA1
+:107F30007FF7FC3CDDF76911DDC5CDD7610737D987
+:107F40006C51608F7DD8F9CD7FDF03F6DD36D92502
+:107F5000D1F52C7E6DFB7FC3EFA39C871F5C60E790
+:107F6000AF301EF6F911F67B7FD4AE5342F775CED3
+:107F7000916ECC2B0CD92F08BB9F2AF60B96DABB3F
+:107F800030FFEF7FBBAFD33286EF178C2563411FE5
+:107F90009E6F7E17E370CB63D8BACEBDC2EF2107C8
+:107FA0003D42E9FC666808F7855D5A85BFEF53C915
+:107FB0007FBF75D81895F90523EE53E0DC77137D64
+:107FC00082FC9F4CE5541CA593EEFDA4601FE45D6C
+:107FD000A4D8309FBCF1D2ED18E73E12E5CDBF8F9B
+:107FE000D65BBA6E0A96975F8AC67E7F2F774FC69A
+:107FF000BCE697D9EF214E4B9EBD1AE60FF5EFA7D1
+:10800000E34DFBD5CD3500A7E5FBD8F9A969F21FF3
+:108010008AA19F656D53B0FD34991C91A8BD10775E
+:10802000E91EEC771AE87A5A964B6C8F81FE952DF3
+:10803000FECC6741AE586C28579A2E4562BBA99575
+:108040004C4FFBC6303BC6DCC3E6557DE936FC2E03
+:10805000F0FFC29854DD3D3266C73605CE27987BC7
+:1080600024AC7FCBA53C7C8A75BE95FD3CDE576277
+:10807000767C3D19F23ADF4A92EC687E18E4EE8590
+:10808000E6D23812462EF58D7389E501475C627998
+:10809000C12F14B93B81BFA73FDCA3C0FE0E89B13D
+:1080A000DA015ED32714A90B43F8493E709705F017
+:1080B000627EF29805F47E047D56867C6F14F9EB9F
+:1080C00006B97C80CB01717E41E819A276E87E5F1B
+:1080D0004DF0CBAF38BF8AF6DD40EB80C79722D09A
+:1080E0009F7AA3487B17E6DB5DCE7E278328DDA33E
+:1080F000605FE55F357F8A67AB84F67E0FE6C54F2C
+:108100009FA09A60BFE0FDBE7530BEBDD63A7ECB63
+:10811000EBFF5E262DD0EFEF274DEA76D3FEF6FF7C
+:1081200070DC3890FF62DC2FC6B073C3C41EB80C7D
+:10813000FE5DD3EBD12AF0F73470968A83762D7DDD
+:108140008FF7E535BD1EB155A2DF9B62A97F4BC7F6
+:10815000AF7C23D20F74BCFF8D48057FA7A858FBC6
+:1081600002E465E51B5955E0CFB93B231482768EB6
+:10817000FB2CCAD501E67B2D3965A433C197DA3AC9
+:10818000C62FF59C4EE772FED3381F5D681E8A7CB1
+:1081900078E1613A69D80F7D582AD80776816AC399
+:1081A000FB89055F4E033F88BEFF7F46E48E2C00AF
+:1081B000800000001F8B080000000000000BC57D40
+:1081C0000B7854D5B5F03E73CEBC9299C9E44942C0
+:1081D0001E9C400841024C26218410601202A2021B
+:1081E0000E501530C88008110909515BACF6CF84D8
+:1081F0002410452D56DB068B74C04751696F406CC7
+:10820000D31661786863F5D368EF6DF1D6DAF8B804
+:10821000888A3582F5A3B728FF5A6BEF9D993349B9
+:1082200010EDBDFF1FE53B5967EFB31F6BADBD5EA2
+:108230007BED9D79E312432D0A63EBCE253296CC7C
+:10824000D83C95752B498CD59DCB65AC98B1F5E79D
+:1082500092E97DFD393B3D579E1B47EFADE754E664
+:108260000378D53985F900BE6AA633684A60EC42C6
+:108270005120D3930AEDB45C3E87B9180B6CCA2821
+:108280000938189B7F57AF664B618C392CEEC7A11C
+:10829000BFF96545E9ABE1FD05FC99C158CB9125D6
+:1082A0004C7742BB297E8B0FDEAF82E7CCA8F29BD6
+:1082B00018F37502CC987B765A097CDF9A6BBA87E3
+:1082C00045CA758F89B14958DE4CCFF9B2BEDEC5BB
+:1082D000581A6337B819FFD90883CB60CC29EAAFA5
+:1082E0007484479BA03D7383DDB309C67526459F03
+:1082F000CD006EBC1B004041A3D93FD309E36EDC27
+:10830000AE7882F0F98DA54E1B8379969E68B004F5
+:108310000A23FD2F393781E9808745E7F2E8993A4A
+:108320003E3001F1B0E2DCB584AF95508E4FA69798
+:1083300099703CB7D9F0771C10C0A58CDD2AC6F720
+:1083400059C3E461DF81FE3F7BD94CE5937CC11BBF
+:10835000703CE690D5B30BC673CA1E50198CE75417
+:1083600036733F08433C65664137D0EBC60E950532
+:10837000A1FD55F00CC0F35422F3257A119F30CFA4
+:1083800002DEF605F8F7776D5B0E1B05F46DFCD386
+:108390005BDA48C66ECEEF991086766B2AC3A9D7F2
+:1083A00041BBA71F337B82D0EFBA23AF979AA0FCC3
+:1083B000C35CDF30A632366678600ECE67EDC2D081
+:1083C0002FCC00DF72DF33AE297A049F9D5A78B438
+:1083D00006DF77021E8330AECE7BD53921A2178B04
+:1083E0005F301E1F803DA83A7B81124C00FCB1EA31
+:1083F000A97CDE363EB6B5E746117ECE3658C71F9D
+:108400008076CEEA4E0FBEAF3BB788DEDFD27E0568
+:108410003DCDBD5708BE8CE7FC9AB96C13F2599D4F
+:108420000695E1BB3A47422808F399F76FC07F8071
+:10843000F2F50716F82B91EF0A14CF6878ACDB76CB
+:1084400085E0F3DDF797035EE77D92E26981F7BF90
+:108450006A4A076445F87FD6B905542FE1DCF5D4A4
+:108460009FE47FABE07733F27F14DFC3778CC17773
+:1084700081A2C09D88A7AAA7FFF9CC7FC2AB2BB56C
+:1084800070FE4F52F0E924FE89AC039BFBF15C5A6D
+:1084900007FAEA283E528F2EB1E8802FF3436FD3BC
+:1084A0003AB0C2736654F97AE4EB42C44CAFB6D02A
+:1084B00019791FFC9AFCBF5ED49F6365CBFDD89EE3
+:1084C000D69313DDDEE1A2AA073D50DEE151787BB1
+:1084D000FF43E3063CD910BF307E1FD26B7E996EFE
+:1084E000BA2717FB91E3E77CF255E36F13F55F556D
+:1084F000D9466CF7D519337A7CD0DE913B8B8B55FE
+:108500003DD2EFD31E0BB5370F6887EBA8EF396B61
+:1085100068772E8A11C614A8FFC9736343F7C01485
+:10852000DF627DE7713CC183F13ACEAFFE503CD5AE
+:10853000AF8F4B0829505EEFEACBF7C378661EB6C3
+:108540008791AF8E1CB66B0CFAAD28B9F169C4D314
+:10855000CCC363AA15E043DF41ABC6A0DEDF27F83A
+:10856000F6221F0C357E39BED8A79CBFE42BB95E1E
+:10857000E4FA90EB2176FDC8F570D5564FC277909E
+:108580004E8098C771FD68C1BD388F3A3DBE08D78F
+:10859000A55C47EB0F28B4CE40E87A46EB917524F2
+:1085A000D74D649D98080FF3849E186A9DD48975F1
+:1085B00071935817723D1C533B1F2C87EF661605AD
+:1085C000FE827892EB62DDFE58BD30245F31E4AB71
+:1085D0009B521A18F2551D3CA3F9CA3AC47A78077F
+:1085E000F923F5D2D743CF25F2D3DF919F26FDAFF4
+:1085F000F2D3DF916F06E1A7CFFF157E8AE597B32F
+:108600000D7F2AD1613C674B40CEE646F8EDAA9734
+:10861000D8F803F09E8D727A907FBAE3F83CBB2DB8
+:10862000D9A116AC778135201EA5FEBF09E99E1C95
+:10863000E153AF3730BC685284FEDD71C1C20D8595
+:10864000974E676B4A8FC55788F4EE31E8FFBA2121
+:10865000E83CA2E8EBD1D929EA7F159D3D455C6E47
+:108660003037D0B184E8A7235D63E98E7445BAD76B
+:108670001FB2EEBE185DD79704A6160D2227988F5D
+:10868000DB0311BA581721DF9C0D83425386A6AB3A
+:10869000B983E35DC26D614DEADB64D4B7C02F15C9
+:1086A000D8DF37E5977933E1D7E1083EB5D89705AC
+:1086B00074FFBE80D92F16237DAE2D93E54F77F83A
+:1086C000F250EEC0EFE5D4838FD908BF1C0EEE3D0B
+:1086D000510DF5AF7AB0BF3C88E5B32A12447BCC8C
+:1086E000A7B048FDEBF73D79E25E9AC736AE0F02C0
+:1086F000BD9A7F7C145C02B0330A2E8B8177F0FA2E
+:108700002EAD97B9A99D105FAFD0BEE2E5FCE38F17
+:10871000B2478092B313D19E3CA0B8EF01FA2FADBF
+:10872000F8C482F48ACCFF00CD7FFD4145C05D27AF
+:1087300070BE4B0F70B879DFC18EA026DA033CAF54
+:10874000136836772A3E15DA5D57A68446E60EC4CE
+:1087500073739151DFE18F66FC9E5952BEDEF7B80C
+:10876000BEE9FB91F47DD8FA35FABFAE82F9428EAC
+:1087700081F51E90EBEB3CC0B27DC0E522985FA86E
+:108780007060FDEDA2DD1E9349E0EBB50EC45F8F76
+:1087900045E2B3A7C35701F4671C7E745FCFE26064
+:1087A000211FBE2F66FE171B7F5BFFBA8FCC5F3782
+:1087B0007E1FBE18FEB60EC09FE09F5A233F25685D
+:1087C000FEE367A19D8414C58D76F17ABFFD5EB48A
+:1087D000FF23FCF167E28F1E3BEBE76723FFBFB986
+:1087E00018F97F3D93F5DFEAC0F5E337F5D7E7EBFE
+:1087F00041F2177C5F00FC8426327EFFDCBEBF7432
+:10880000041D441F2A2738EF22EBA13306AE8859F6
+:108810003F82FF69FDA29C07FC8C1E44CEBC29F060
+:10882000FBB1C216A39CECA9E27662CF48FE3C5F86
+:10883000C4EDC2F7041E4F8BFA3D715178C88AD03F
+:10884000197EC2E88744CD9BF0B42445CEFBCBC54E
+:108850007361DE3D49BCFCF3A2FFEE086645E0D83B
+:10886000F6CE157D497C1369FFFC09C4EB1281B774
+:10887000F3455F9C107CA5E0BAAC230601BE38A08E
+:108880000455F413902F0699F7F1817C158CF9DECD
+:1088900067BEC8F7BF1FB82E7D31DF3373C9D7F964
+:1088A0005ED06D6E0C5DE7C4D0B53A06AE9170C86F
+:1088B00020FFA45C5CD9F5405B1ACCE3963D0AAA84
+:1088C00099287E762CC1F5798B5BF2AFF30DB4BBA2
+:1088D00022FCEC227861A7948709DB511E2E407997
+:1088E000581E8117A1BC20D8BDC437315A5F24520D
+:1088F000F975EDB27E12C14B5B657BC9DB7D5A8495
+:108900008E2C98B204FB5B5222F44530F50DACBFBF
+:10891000F620FF7EE2FEB4372EBA1EB6C5E06547EC
+:108920000C1C8CA9FFD057E897D698EFEF8A29BF87
+:108930003706EE8881DB8DDFAF58A5D03A5C01FCAD
+:108940008084F8AA7539C3DB6FA7F6EB53C541766F
+:108950009B615D5DD5C2E12BF68F5AD2EE8882BD58
+:10896000A397041D91756166FCC79AC2685D9887DC
+:10897000909793BDB1EB42CCA72056DFF2F2BFE255
+:10898000AF19680733835D704C35C2475439EEE246
+:10899000376E2BC49712F62EC1F8CA553F36CE0B50
+:1089A000FC55017B96545744D925C1894B70FDCBAA
+:1089B00079CAFAB3BFB8A0627FCBBD13973C06E576
+:1089C0003555E1D10D30CE9A24FE04BDA6A2DEAC11
+:1089D00017F198D9CFA97ED46B3571E1D18D85512E
+:1089E000F3649DF938CF2377AA449F600BD007F03A
+:1089F000B492814300AED99184848D4F40FD63775A
+:108A0000AA1B518FBEB531390DFD9B835EEE2F1C25
+:108A10004B18917613C047E2975B74A87764CB2C10
+:108A20007A1E557D9BFB60AD7D6FFFF4258EB1589E
+:108A30009E40F8B9C35BBEA419F8FA2EAF4EF80CED
+:108A400024B9D3BAD07EBEC7CC1ED769FE3B896F8E
+:108A5000EEB316A1FFBCA2795C1ADA932B7FB86043
+:108A60007606D45BD966F628548F4DC07107EE990F
+:108A700065C1F255ADE219BC9C9E87BF7CB4C505AB
+:108A8000F5FB1E513CBBA1FEB4CF3A5F9A00F09AB1
+:108A9000F6511E24CDA17326E6867EDEE918135218
+:108AA000811FDFB537BC309FD767587FCD79FD95E3
+:108AB000F925585F756F82FA27E13DDAC327EF5633
+:108AC000772B382E97334E81299DFC427F05ED5A36
+:108AD00028776F82F727DB6E4E433BEBA4A2BB14D3
+:108AE00098FFF6FD7397A403BFACE9B00A7ACECD28
+:108AF0005801F35F61EAE717D21FAB1339BCDD3BC6
+:108B000077C9E330FE93DBC7B810CF89C5BE87BDF8
+:108B100080E7B78A7D3FF1A6E238B99E3AFCA5BA54
+:108B20001CEDF1DF9E5E9986FCF4B8583F87CEAD10
+:108B30004C5B1965EFACFE5823BA1FB6E8B7E138B5
+:108B40000FC7652BE82F03DD9317C0FA5D25FC0FD7
+:108B5000E0DF8DCF0C62F704BD2AB57B646B6A85BC
+:108B60006EE0E3EBDF40BE24BF01E05FEEBF6E3B93
+:108B7000EAB5F7AC1BD9BBB8F8EE828229F03C66A7
+:108B8000A7F89579AF3D64CFC5F8A76F36CA3D9673
+:108B9000DE99BFD019B5EE44FDBF049D54FF2F50A0
+:108BA0001FFDB7BF04FFEC648E8176FC1A973388F3
+:108BB000C6C4FB4EA78674784B6B3A79077CB7FA2C
+:108BC0001133C9FDD58FA4DED587F206F805E3631E
+:108BD000B1F3528BCD34AF21D761B0D6B80E592D39
+:108BE000C9EBA1D661CFFE35175D876B849F32FB41
+:108BF00011B31FD7D19A494E8D81FEA87AE4F9C7E7
+:108C000091DFD76CB07BAD30F0358F58895EBD4EAB
+:108C100067D00DE50197534B84E75B82BEAC98AFFC
+:108C20009B992AD36C5E7AB6629CF40C8C2719E06F
+:108C30000F363EF8A3C950ED4316BA7632E0EF0C7A
+:108C4000120CF072E6804AF143A6F9B479201F6B4A
+:108C500019970B752F3E63A9C4D935AC998B7EDD6E
+:108C6000CD21F33BBDC267BB20A689F2B49EBF02F3
+:108C7000BD6A2CAF67F77EAA4E2036B6E07AACEB21
+:108C80008C296FB8FC7D8CBFD433ED9D5E19AF8508
+:108C9000717CEE75A69C8C4771C8BC802176A6C1FC
+:108CA0009CCF608A6B1CB0AE60BE33772834EE3543
+:108CB0001BD59015EACF4CE671DFF79A80FE63680A
+:108CC000DE4137C06B1EE27A660D534236F8F5F28C
+:108CD0001D1B345C0FEB857C59A1303FF2F7BB764E
+:108CE0004F0EFAEBAB1FB1137ED7ECBCF98FDBE173
+:108CF000BBDEE67929D1FEB143F005B4CF6C4991D2
+:108D000076DE6FFE5E0EF2FFCC9F829F0BF35D93CB
+:108D1000C87EB12417E99591A33B22F5D66CBA33EE
+:108D20009FD7033F19E6BDE26E95E6C19EB592DE80
+:108D300083B59E4E7259E07355EB8B164B21CAE9F1
+:108D40007B7B54A8FF0EC0AA83F0151478B420BE14
+:108D500096E3B719FC9BF4526177EB24470238BFC6
+:108D60001A93B27C21C9F53E0BAEEBF26285C63395
+:108D7000B198DBB32B723C37501CF97EAB07E5147E
+:108D8000FEA8721CE057D5997A56633C97FDD24AEB
+:108D9000F191FA56BBCFEE22BFC3B71FC7A731CDA3
+:108DA00002F858A77379512EF8B05E5F7039F20D52
+:108DB000949FD0707FC5C9E5625D22E09DEB639F03
+:108DC00009FAF9047F1BC5DBCD9810D5BF22DE431D
+:108DD0003BBA2BD26EB789B5639C05EB8F9D80782B
+:108DE0004CBE76318EEFE72AAD6798FCFD6568E7EB
+:108DF000FD5C2D46FF76C5DDC7667720BCAFC88D0C
+:108E00004DAEF8C51F486FDC22E8DF8BF63EEA1155
+:108E100080F7C1735131D7FB0195C77D16097C4995
+:108E20003E90E575779B79FCBDCD4A764C5DF39F0E
+:108E3000A8DD3A674F1ACADFBA67CDA528A7AF15D4
+:108E4000E35ED99C5D7102F86AA539C1ADC0AB750E
+:108E5000C1791684D76D53088E7C979A837CFA511A
+:108E6000EBAF5CC83FEFDAC3A3511FF56DB07B7663
+:108E7000E30444DCEDA3D6D1BB313EB3CADDE354F9
+:108E8000A07CD56DA392507EBFE50E5BB0FCADCE4D
+:108E90005C13C23EB7BB02619F3691E08F40947570
+:108EA0000AFF13F96DBDC2E9BC6EEF31CB48E8EFA4
+:108EB0004E31DF8F7FFE877CD45775393DF9A85737
+:108EC000800FF23311CF4F29A48FD7EF557DF609CC
+:108ED000113E588F7C00EB6EADE083F5077EF51DEB
+:108EE0005C0FEB91FEDE817C047C7A9CDEEFDF354B
+:108EF0009BF1EF8F239F483D0670AB19E369160184
+:108F0000433F08DF85F89C44E5D5BC3C5848F294C3
+:108F1000F55AD0EEACEF32077BA3F67F86A2F3764C
+:108F200041C795CD5692BBDBC5BC7BEF7ED6857421
+:108F3000FCF8E7C75EC0FD92BAFDA0ADF541D6854D
+:108F4000C04B3DE2C145F320FBA21EE7ED8AE0A144
+:108F50009FFFC57AAC677C9E72DEF59AC0832C17A2
+:108F6000DF3F2CF8661D13783B3086AF3FB1DE70D3
+:108F70003DA35C95F30B24F1EF259F1E2EE67A614D
+:108F80008F78AE03BEF01412FFF82C524E40D1C7BA
+:108F9000FB7651FC47D24B8EFBB5883EF12526452A
+:108FA000E8D86B62B59D83C44DBA04FEDE6E1B9695
+:108FB000D30578FB08FC2CB4A7905FB5A8FE24DF8E
+:108FC000C8FE663EBDE04A9C2FB41FC6F665BF6F63
+:108FD00005E3356CE72DC6D707F227CA4FB92E67D0
+:108FE000B62CBBB2C885F53E768E423B46C8B3D799
+:108FF0008ADDF4BD0FED05F8DED7A550FCF96DE173
+:10900000D7BFDDF62BD7CA283CBD2AC62DF90C7F69
+:10901000302E25C7DB9DC4E3B9B1E39672488E7B41
+:10902000E696EBAEC4F772FC925F257F4A3C4A3E5F
+:109030006577A5925D13CBAFC46B52AFAA06794F8B
+:10904000FAF1F2AC4F2D01C7C0F7B1B0B487DEC55D
+:10905000380DCA8F27D510C98FD6F4E379517A1EFF
+:109060007E1CD17AA779C3E5EE4ADC7FDDAB78D0F0
+:10907000E489D22FF76A51FA45DA0525252309EF4D
+:10908000F529BE0F908EEB4EF5CC76E9113B74DAE4
+:1090900067613501E3520772BDD1FA74DDE9E3C4BB
+:1090A000FF75AC6733FA512BEEFEC3BCC9C8E74F5E
+:1090B0009A697F6645DB2C0BDAF5373F7E6329F230
+:1090C000D13BEDA348AE7FF0D8A462E22BE64EBBC5
+:1090D00016F87FD5630F5EBB14DEAFEA523D24DF86
+:1090E000A11D5CB72B6E2F66C837EFDA7BE795A31F
+:1090F000FD7E87EA46FB7DEAE393EEC2FA539D23A9
+:1091000012711EBEC79209F66909A41FA4DDFB9661
+:1091100090932D66CE1739257C1DA59670B9915A6E
+:10912000C2F966664B4B3EEEA7F7ED02F98CFBCA1F
+:1091300016BD338CFD3D378CFC8B7A7087D281EE67
+:10914000A7146E97D55A982DC34BEF6D19F0FE45B5
+:1091500073CFEDA8475EBCDD59D48C0350CF97AEDA
+:10916000E4F634DF3F4CE6FD4BBCC9716497707E7A
+:109170008F6D4F7EDF8D7E04CA5331FE0F5A9FBC28
+:1091800016F5E0077B4627E1BCDF7FCEDE8EF6D406
+:10919000FB662E1765FB60E7BD176DA7815D6780D5
+:1091A000C18E33C0C0BFEF19EDC24D34AE8925600A
+:1091B000C78D63FD769CE4F79A0DA313A2F30862B2
+:1091C000ED779617BB6F3339810D226FE4F374137B
+:1091D000200A18F52CEE1142BFD5F15F3CD383F67F
+:1091E000FE36ABDB0AF37C0FF91FF7A59E5543B89B
+:1091F0000F83B639AE87F7F61585D08F5CFD6660B4
+:1092000036B67FFC812D94677013D897C39428BB22
+:10921000F9A107AE45F63FE3096CCE80EFCEECE155
+:10922000791150EC88B1975FC8D0FF757BF952ED8A
+:1092300064196FA82911F6B2877910CF12BFD26FC7
+:109240003A0C7C50E68DE0EB6F4DB564279F6E0ABB
+:10925000D0F313E5EDFBA722FF3A133CBBE1B3DFEC
+:10926000763DA866229D0F149D47BFB7DC91E0C6EE
+:1092700075FBB7A68DB4F978BAA9819E92CE32DE7D
+:1092800036EDC011FAEE6F5DC507A7C277871C09DE
+:109290005CFE0FD8EFE1F48CCD03B975C3E461F83F
+:1092A0005ECEEBC33B385DE5B83FDC73A30BE775DF
+:1092B000E427C907A7203DE313DC68EFAD11F91FD0
+:1092C000273BB83D7DCA96F0C45CCC1BD9B1288D34
+:1092D000819CBDE9C8B7AEC5F7AB9F53DCE8077802
+:1092E0009E5BE042FFF4BFB45E971B9FF05D18C722
+:1092F000A385549447E57318ED47958735A6E7D2C3
+:10930000562FF1CB94D35A08F3463EC27D2A8C8760
+:109310009C8FA3780813FB4F37FD9AC751FAFD5B6A
+:10932000E1DF4D15F3EE2A4992FB0AF47E66197FC0
+:10933000FFFE8E67E6637B1F3C6676E3B8FFF69818
+:1093400099DA5F0B7E9909C67B6A0FF777D6762A82
+:10935000E4277FB007F435CCAB6E83D9674918C8D2
+:109360008733A1BCD711E1C3B5BE10F13713FC6838
+:1093700083FF2E8C1CC88F89AC7333E2E35FE5CB8F
+:109380005FC4ACFB7E7E1C8A0F04BE701D233F4A67
+:109390007AAFEDE0FBEA499D4595C85792FE524EE3
+:1093A00004AB5801EAD5160B2BC03C9CA029CE83F8
+:1093B000EB7B8143372B80874529BDD5284E33274A
+:1093C0007139ADCE34F94CA85F5AAC240762E5C8B8
+:1093D000EF845C9F8F3C0DFFDE2DE1768499359004
+:1093E0001F229FA077B2517F2F884FFABB0E55FEE8
+:1093F000FD40ED520DC6BF606AD2EDA33C8CBD7935
+:1094000060FD520DF8774171D2B323017EABA48E7B
+:10941000C313932699016E6EAE5F5A0DF5FF59E2A4
+:109420007BBD24AA1FD92EBCFF8F1280378D0B9CC9
+:10943000C067BDC54172FA13A56FC2C6DC48FDD72F
+:1094400014F6D66F9508DC6B663968DFBD5B22C702
+:109450003FF8336F92EFED9241DEAF64AC0DE32A3B
+:109460002B83BF3BA1703FCC6F037A5D2DF86AA5BB
+:10947000CD11267FBEDD7CBA9FDEC8479E040DE974
+:109480003A5FF0D1D55AF8087E3F96B5BA4FDAC8A0
+:1094900084DA71217968F90D0B8F9D94ED01BF7C01
+:1094A0006286F9025F2BC09E1B61C92880E41A9076
+:1094B0005FCAC1DFFD03DB6D09B25E3BD1A1C68D82
+:1094C0007CA6B080E9023CEBE25D13306E52179F40
+:1094D0001342BE6F7CF6E3E3C85E374BFB25504674
+:1094E000FC7E9B9BCF8705CA891F6F17FCF87E13F4
+:1094F0006BC883A577754F8F4B87419F9E1FCEC743
+:10950000F5FE694E206E12FAF93B5AB21A817F3E7F
+:10951000DE6FF5CC85FAA742CF501C6E9DB047D9BF
+:1095200063A962DDABE11950AF3B77EC6ED42F2914
+:1095300093385F9DCE0DE7DC89722397FB3F508FF8
+:10954000F2DCE66CBA3C15EB9DDEB725EF26A09F5A
+:1095500055634167123D990BE67D05B45D06B01970
+:109560006095F67343442FACE7427DAFDF98CEE3BE
+:10957000EDCC8F7245D24BD261007D600868AF9A06
+:109580006CCC8CE31FCB76B8517F483ABD6F033C5F
+:1095900062FCCC067884F53D0B830E25884F1E6F48
+:1095A00069547A5B9311FEB942797303F5E0E316CF
+:1095B0004479ED8E1B49FE48B9A3C37F83C99DAF93
+:1095C0001D37DA317350B9336D92D08345ACE80260
+:1095D000371089BE6BC4B7B3D41A5DC371A7DA3C28
+:1095E000184F6B7C6414E91BD6FA07165D8FED48A3
+:1095F000267ED99CAB12DE6FEE5228BF715E5726D5
+:10960000D3A1686E57323D5DE732E8FD074FBC5489
+:10961000C2E512A7CBBC9F0DABA2BCA29F8DA1A798
+:109620001C47A3E0BB596A616718ED08078C03E08B
+:10963000C617B9DE6ABC46A5B82643119D86C4E4A8
+:109640003F7E473BC57FFCACDFBE572E509C564F3C
+:1096500040BAF8BB5586FC03DE4690E3D9D68C7839
+:10966000B6A69B983E88FD611574B2EB714C8FF2E3
+:109670003BB4E0D8EF57603CF65B664F08CA5BEC42
+:10968000AEDDB89E58D0D783FEC262F15D8F9DF3E8
+:10969000477C4192E1FB2DAED9DDC86F8B7D5CEF3D
+:1096A000383DC30DFD5BD57566643216E0F6A2E465
+:1096B00007E24BE8F76ABF42FAF59AC5501ED5AEED
+:1096C000B9E25392E3E60AA39D69F51BEB7D6F9225
+:1096D000D03B63D9D868FA47F0EEF0A19D7EC6E78B
+:1096E000243E06EDFEE30A80AFED36339CAF358EA7
+:1096F000CFEB0C620AE3A23E3584F1922D88077805
+:109700009F5066C467A2CF88BFE439467CA4FA8D17
+:10971000F31FB678A4A13C237099A13CB3D66B800B
+:10972000B31BCA0DF5476CAC32C0B9C12B0DF54760
+:10973000B52F34C0A3B72D35D41FD3B1D2503E3688
+:10974000B4D6503E6E4FA3011EDFF95D43FD895D27
+:109750009B0CE545E17B0CE5C5DD3F30C0937A1EEF
+:1097600036D49F7C62B7A17C4AEF5386F2A9A7F654
+:109770001BE0697DBF31D49F71EEA801AE642F1943
+:10978000EACFB4FDC100CF72FFD950FFF2F4770DDC
+:10979000E557E81F19CAAF2A386BE4D7382EFFE621
+:1097A00079FE69F84EC90ABC3C096D04F5B4867CA3
+:1097B000DBB24C61C9184FEF5E644339F08A9443C1
+:1097C000820F9F47FD8CF5F3580ECAB3596A4518AE
+:1097D000D7ED992E85D67FACBED33EF2FB309EC727
+:1097E0007EA57830CE96006A4B8BEA3FD16703475F
+:1097F000320227CF711BE0547FBAA1FEB0C5BAA1D7
+:109800003C23506028CFACF518E0EC863243FD11C4
+:109810001B7D06383738C7507F54BBDF008FDEB65C
+:10982000D8507F4C47C0503E36546B281FB7A7C155
+:10983000008FEFDC68A83FB12B68282F0AB71BCA3E
+:109840008BBBB719E0493D1D86FA934F840CE55355
+:109850007AF718CAA79EEA34C0D3FABA0CF5679C07
+:109860000B1BE04AF6A2A1FE4CDB6B067896FB0DC3
+:1098700043FDCBD3DF36945FA17F602897F6CD55AB
+:10988000059F1ADF0B7B679EE71F86EF83553E8699
+:10989000FC11DCAF785A74C60A4B47927D0172BD49
+:1098A000D7AEA27DE4A7B851122608025F26801029
+:1098B00043BE4257A186E24F2914F725D5A463BEC3
+:1098C0000FD8090024997273D19E8E8FD86D5917C5
+:1098D0008A2FDD6E2B2F65C4E73797062696A6A242
+:1098E000BFB26F36DAED37B3E0661C07E8BD845EC1
+:1098F0005C1F76633C433EAFB0015EA2FA7BD1BEF3
+:109900002DCB7B11BFFF0ADB69AADFDFAE8873288E
+:1099100030BFC6A8F6EF07BF4203BB6E5B13AC1B9C
+:1099200070187FD0E426F8A1A674827FD4A4D3B3A4
+:10993000A3A9809E0F3779A87C475319C13B9B7C14
+:1099400004879AE6D07377939FDE3FD6B498E027DA
+:10995000C08FC6E71EF0ABF1F914F8C758BE17FC6C
+:1099600065847FD114A46767533BBDDFDFB48DE00E
+:10997000034D1D04FFB22944CFAEA63DF4FC4D5368
+:1099800027951F6CEA22F8505398E0705337C1476F
+:109990009B7A083EDE7482E0179A7AE9D9DD748AF0
+:1099A0009EBF6FEAA3F2979BCE11FCA188D7AE2988
+:1099B000E5F12289170933564DFC20EDC3F968E71C
+:1099C00023739499FF66B0F363ECED587AC87ECCAC
+:1099D00055181384E7F0FCDD2D517ED6ADA2BF2DC6
+:1099E000712C68077E6F3671BFB63989519E351369
+:1099F000F6EB1AC1972C85DBADABC5B8D688F53030
+:109A000009F9B380F8F3E5AFE35748BFF14C61A023
+:109A100085F833DB1424FFD911CA47FB39757C6004
+:109A200073E924DC6FBCE905EACFEDA17DC779D6E7
+:109A300070EA75181F7951A578DE50FDD58BFCF1C1
+:109A400021CB0F7D9085F6F69C2FD500E2E915B36A
+:109A50007331C60BB69772FF747BA9C9F0FCC9F8C5
+:109A600040078EE77367C30D2618FFE7D3373C71B5
+:109A70006B6EC49FBE1A5D52F0831630DD4CF989BF
+:109A8000CCF77C2E34750D1858085FC782F4CC2AA9
+:109A90000CECC2F92E01431CE140B93567B079C521
+:109AA0008E6BAF18D75E311EF97C717CE0696CEF6C
+:109AB00073A78FC6F5CA94CBF3715E725C71137491
+:109AC000719EA16F278EEFF3E73E3DA98C8AE05F80
+:109AD000FAED9B2B455EC90685C7E5A4BD26F2526B
+:109AE000A4DF5173BB12427B7D19F83BB8BFF4A6CB
+:109AF000B03FDFB473FD7CA6C15C80767D8D12E73C
+:109B0000C17DB8330DFFE540771AEA33DC2769C120
+:109B10009C03286FB943A17CEE1A68C704EDD4609A
+:109B20002010BFBB4B21FEFB627C2E8DAF06CC3FCD
+:109B3000F2B352FA7270BF14F8E545A4C3DA296A89
+:109B4000D002F6F02BA650BE42FBD237591418E7CC
+:109B50009A14E0939143F3C37A71FE40BE073EFB33
+:109B600003B6F7B75F4F2EA038FEA1293AE2ADC584
+:109B7000C4CF23057FAF7A78BE0B17D5EAD4F11492
+:109B8000A7649AC78371A679E2FCCA11956DDC3788
+:109B9000881CFDBBA0DB2BE9E639216AD7B85FF34F
+:109BA000B1A0E3C7A2DEBCA32F66E3F9ABF5DD6687
+:109BB000B24758496FA1DF39C87C366EFD765E1416
+:109BC0007FD777BDCDF335586F61747EBA6B326F36
+:109BD00057F2936A71067639A2C7D7CFDF9F117FFC
+:109BE00027027F8F22FE3E89F6F67CAB9E701D3CDD
+:109BF0007B01456178067EEAA67C239977B48AF9D1
+:109C0000E9B906D801F9D91F7CC082F85FCB3AE9DF
+:109C1000FDFAB21B7310AE677DD5E9E84FB4373F4C
+:109C20009F0EA35CB4ED8159189F5D185AF13C3E1C
+:109C3000173CA69C44FF15D6877932C64F9486B64A
+:109C4000E1D0DFD2BD956D99F07EBECAE9C15EE27A
+:109C5000F400BEF1A94903E709EBC13999E6E1A394
+:109C600079A8AE3986F550B389F9949448FE7CFF03
+:109C7000FA28BBE5AF99E80F697DB4FF5E7FC89A0B
+:109C800084745ECBB8FE8EC43FA4DE66C4E7B7B072
+:109C9000380FD6FB50F0F587D98CF8FA43051C3CF9
+:109CA0006FC49E64398174EFA888FEFDD0142A75B4
+:109CB0008D22FD9C87F37D217D918E71B35B526C6B
+:109CC0001E15CB1343397C1FB55FCEB30BF191B892
+:109CD000D7FD661E878A1D9752F6C23FD07EB05AC6
+:109CE0005810F737607DB3525CD7C32DB4AE5A100D
+:109CF000B5183FABF2EB83B5DF2ADAEDFE82FBC18C
+:109D000041980F9E971CD08F5BF413C7FB917A0488
+:109D1000FB233992C60CFDCDC22417A0CB2B4E1FBE
+:109D20008DBFD9944872E7E311816AA4978CFF48EC
+:109D3000FFB03BF7FD3CF2E3CFB764A19D0EFCCB37
+:109D4000F312A773F9F48A590F22FC4A652EC5FF56
+:109D5000A5DCBDBA8CC7CBAE96F1B18A98F8584C49
+:109D60005C86550C1E2F63CC63C67EC7B237257E3A
+:109D7000281E73B44223BA0781EE186F3E2AFCD422
+:109D8000CA78EE9F774E4E267E4ABA226FD07D1556
+:109D9000F9BC47C457EF053B8845C5D5EF2969B4E1
+:109DA000619EC1964285F6BBEEAB8AAB8DCE73DF6A
+:109DB0003BCDCCF753A757EE44BC153A4255A4AE61
+:109DC0007D9A8EF350C4BCC6B901EF266CDA2FE23F
+:109DD000A41E1B8F4B5593BE96F4BE547DFD941666
+:109DE000DA1487F34E61B4FE9C1D7692A36AA72F06
+:109DF0008C29D75F4E5B7827D151F317603F474AD4
+:109E0000E39803EA7F7EC442FEFD21D3CA9F623EEF
+:109E10007CDF1B5686FB9E9DCE4C0DF545E71797C4
+:109E200055D3D3397536E371CE7813088822377B42
+:109E3000F4DF9058E2DC59A7C2BA19C5DB7CF126E1
+:109E4000F0C13A4DECEC0C18D77E87F7C189C4728B
+:109E50007E15E7D95511B81FD753296B20F83E8BD3
+:109E6000BF7617F47B5F928DF8C45FE17F808F939C
+:109E7000B5CD85F14D9FA9303CC7DB6601B95C8843
+:109E8000719238BE27C5B87DEF3F974FFDEF98CC54
+:109E9000F7F95AD37D3D78606448BCB9B5BEFEB8C9
+:109EA00008F15B16C5F3241EA3E9E52E35D02B601F
+:109EB0008EA65719D06B7C34BD7CCAD7A1D7ED983C
+:109EC0005C3669207F06ABF407AA4BB85EC314B9B1
+:109ED0004A6B7621DAEB47E2320BA3F7F5245F4AAF
+:109EE0003E1D843F371C43F990A5B9317E6A9D170A
+:109EF00047FB2D925F259FFE754A3FBF7ACBE1B9A4
+:109F0000CCE19F853224965F311E16CD973543F202
+:109F10002F7347AFD7F9603F2424A1DD73EAB1CE98
+:109F200028BEAC69F854E3F2E3C28CB8D248FC6EA8
+:109F30007E85C2DE89A62FFC7BA740CC8FEC1E8DD0
+:109F4000FC2D89C74BC5B7F95BCD0568C76DC6F356
+:109F50008980AF76C5E31B8671AD86B76FC5F76D97
+:109F6000E27C70B0D0C2ED2BB14E647B5F4EAB7A19
+:109F700007F9D639F974FC6AA8F7799A4947E4B425
+:109F8000E92BFF8DD6DD897886DFB9927B6A1FA524
+:109F9000753486E1FEE0E7370746E07EFDDD40A749
+:109FA0007728993A34CC447B59BDC3701D0172D3D4
+:109FB000F93390CEDF33511E22F83B53460ABFC31C
+:109FC00027EAF752FDBB2DDB6C71D84FAECDBD3B00
+:109FD0008ADF6788F83A1E23E7FB672D3ADA657A4D
+:109FE00019D7BF0F36ED99F6DE681C4FE7B4F7605E
+:109FF0003CC973432C007C1C5710D43105C4F6E5D2
+:10A000004C05CF2FB0CB5827F20DBE6F1E1F69DF56
+:10A010005CC6D7990DED15A09F6D53504F8A927F66
+:10A02000369312182CDFE58E291AFF6E13A372DB0C
+:10A03000D1ED749E3F39CFA360DEB36DD33686FB7E
+:10A0400031F6307F9F92E7535645B59B3217C61DB8
+:10A05000C517F3F12401C81BDB6E60CC12A4431CAE
+:10A06000C51F63FB9D9F5AD5ADB986E693587E63A5
+:10A0700082DF24DFC879D2C994A873F9D523B93D0A
+:10A08000DCB6D1B20BEDEDF2B244C2EF672955094F
+:10A09000EC227A6527F041D08AFEB18D9EBBC1BF0C
+:10A0A0000E8E41FF389DE027C0BFC6E71EF0AFF11E
+:10A0B000F914F8D758BE17FC6B847F01FE35C29D9A
+:10A0C000E05F23BC1FFC6B840F807F8DF02FC1BF2E
+:10A0D000C66717F8D7F8FC0DF8D7587E10FC6B84CC
+:10A0E0006758813F703E05C1F48540D7F63B2C3E52
+:10A0F000CC17DC20E87ACC3732D903F4B71798288C
+:10A10000F66D7FF9070CE7634F37D1F9AFCDE93F23
+:10A110006037A2DF5AEA24BBA9EDE7DC1EB16B0F62
+:10A1200032943B3B95602DF330B6B86C6C0DEEF37A
+:10A13000E5A56FA84A02F886B2893B6CB03EF2F5FD
+:10A14000058B9BA360DDE95DBBCF1D814714EED27B
+:10A15000C03361377615EDC0A33F380ECC13AE2B5C
+:10A160002BA96906160A8F646457F4E55A283F67DD
+:10A1700015D26B348E9FC70DAF622DE9B86F39428F
+:10A1800007EF47A1FA619672E9F53794E9F43EF6D4
+:10A19000BB8BD533955C523DA65EA43D2C572ED289
+:10A1A0008E4D5964EB81B16F350B3995EA2039D565
+:10A1B0008E711CC07BBB9D3FBBA7F0B8C1AE2955BB
+:10A1C000DE29F0F44EE1746DB707DD55D8FF781342
+:10A1D000E52DB08DB97F1809FD7DFBF71AC3BC4F83
+:10A1E000C99FED820F468F70D2F97B76A78DF6ED71
+:10A1F0002F1FF1F3D62480473FEAF1607EC356E675
+:10A2000089433E09DE6BA2FCC6A74B46252D80EA9A
+:10A21000E3263D9B8472FDA49037219117D4DCB6D0
+:10A220007A04EAB1CF5FE3F2F0C7423EED32F73491
+:10A23000103D2739C8EE606C1BD917CDE9406CD0B2
+:10A2400091A60CFEB498DD4BB19E050C01CCBFB6B7
+:10A250007C31D9867E5DCB39EB1C9E1FDB43768734
+:10A26000C51E7027C2FB6D4113C98516DD41F96C0F
+:10A270005B1DDE6E3CCF1C749B28EF756BA189F0D3
+:10A28000D8EAB83684F6BCA634D7A21E0BB9F7DBE1
+:10A2900072E17DA8D044798C21DFC2390807031A06
+:10A2A000E559D10F960792E81CF756D6F7D2442C01
+:10A2B000AFE176575BDA7F1F8DC738F7356E0FDF5A
+:10A2C00056613AE681514A9809FDEBDE4DF1388E30
+:10A2D000254CF8AD41F2535D564EBFEF1FB9C23D5C
+:10A2E00092EC8AA8FD2B2BC6E43C360F944F707875
+:10A2F000E7A01FA939BD36CCEF6B757B6D2B68FECF
+:10A300003C2F8DF22FA0DD16B789FC592CBFB190E0
+:10A31000D4E1F1BC529172AFE3BC7F7004F1A1DDD6
+:10A32000C458AE8EE3D382D1FB83B65115DD3ACC4F
+:10A33000A37D7512CD43533C04B39B341AF7703D93
+:10A340008ECE2F3F6899D78DF6E170DB2DB48F95B7
+:10A3500051AB19F69986058C70EA62239CCCB4C87F
+:10A360003E15F4FBAEE09B58BCC5E223C3DDFA1AF0
+:10A370008E3F2340876B078C7FBBFBA1C44A86E3DB
+:10A3800074D038D31C2B2BD17E4A65FE66E4BF7F88
+:10A39000759C13DC0B6DB9D0FF84141399471359C6
+:10A3A000DF266C77ABE0F7F65C4ECFC8BA5239BF08
+:10A3B0004FA9CA9C928AFB042670CC22EDE706C105
+:10A3C0004133EC132419E0D1DB861BEA8FE91869CD
+:10A3D000281F1BBACC503E6E8FD7008FEF2C37D47E
+:10A3E0009FD85565808BC2571AEA17772F34C093D0
+:10A3F0007A961AEA4F3EB1D2503EA577ADA17CEADB
+:10A40000A946033CADEFBB86FAD29E8FD58FA953E8
+:10A41000BE991D6F4D1F6EB8C726D64F88B5F36D18
+:10A420005FB6E89B909F5D16E2670DF539EE2BDF76
+:10A43000C1FD21DB748F8EF2255EC8D357A6FB4683
+:10A4400022DD2A5D36D20B9A83D7D31CB3C95EC9ED
+:10A45000E9B0D0FD3A9A9BF597C7A37C6E0A4ECB24
+:10A460001B1D19B7DDBD8DEEA9A874CD61987724A9
+:10A47000BFD7DC3E1670627F3AB793DC41AA67D73C
+:10A48000E1FBA8791C32999803E538F86D181F197B
+:10A49000CA4F93FE99F4CB86F2C7A41F96636271EC
+:10A4A000F8DCA5F4DE8A7E7A61C36B55C318F96BBC
+:10A4B000D5A847EEC3F3D9E8A74DE076565BDA9509
+:10A4C0003AC66DDA733BBB47E278524D141705BBB1
+:10A4D000D9B330CA5E5C2FE8A98D6CEF45FDD798E3
+:10A4E00068D3D15ED26CBBA6BD07F8DA69EE7D12E7
+:10A4F000E310AD8A7B5D27CAC53B1C94EFF1A0C079
+:10A500009BEE34156F82763B9B7D1A9EC3EFBC9BFE
+:10A51000795A717DA4546E4A84F7A3B3569830DCFF
+:10A520003326AF79133E03C25E1E5BB8CB940CE5B5
+:10A53000E34A2A17637C4B75437F178937ABAE0E0E
+:10A5400086F36179DA49E42BB4EE2FC0D02B936CFB
+:10A55000B4FF68477A2BF4243CD8CF39427684F391
+:10A56000385EEC3E2514AF70BB15F3E52A933A88AC
+:10A57000BED29E453B17DBF75704D6231FA5CC352B
+:10A58000D255B33D46F8D86AE2EBA23D517F19F5AA
+:10A59000737B6E5E12EE5BF5CB112157EE10FA5312
+:10A5A000BE9772E523F41D5223F60DF07907C6D944
+:10A5B000ECDA363A7F69BF6B1B43BEB6E36975B20E
+:10A5C000F783BA9FF487DF906F563D72B10DF5F5B2
+:10A5D000D9142FD9B3F68DBFA4F1C5E2CDDECBF3EC
+:10A5E000CE86C2AB2BFF61D2EF2080753CB77334AF
+:10A5F000CD511B1DDF94CF6421F7CD323F083C09BC
+:10A60000D4676765FE912F9E8F2F91C3C7F297D2B3
+:10A61000F86E4DF50EBB98BD6D077F331045F7BB47
+:10A6200035BF0DF1D0767EC11C9AB7468B816DFD8A
+:10A63000A27017C58D85BF942CF0AB233E018F39D6
+:10A64000167E5EC0933297EE2D93718FE7A724514B
+:10A65000B927C8541EAFEBCF4F375D984863D52D4F
+:10A6600052EF9229CBF514FC7F04F35246B56BC62A
+:10A670007C76A1C7A59E1EBDCD583EA6C3088F0DF2
+:10A680000DF8FEDF51CF5FC37F073D602C7F58E898
+:10A69000EB6B505FE3BED5B7785E880D467481EBF7
+:10A6A000D988DE033990DD19AE44B199759B66C82F
+:10A6B00027191EA30FFD153AE1CBDFAD9951CFCA83
+:10A6C000B84CAC1C56EE3CBD01D74B657CBC8EF241
+:10A6D00013E318012BF7CB03E0A7DCA779FE548323
+:10A6E0007E55B74AF952924EB1749D5A2EED5CFFD9
+:10A6F0001FA7907FDC5B8CFE3AF61788EA4FC6579F
+:10A700000E4D0FBC89F5649CE5CC1CED79458FC4DA
+:10A7100051645CC03B85AF9FAD9ED71B8EC1388E08
+:10A720009DB0520C6496FA727713E643656B24BFB2
+:10A73000DC93D7FD14FDEFAA3F4339CCE398AE0F6D
+:10A7400023BBBCDB4C71802AC1C755C2DF92F19696
+:10A75000CF843EE99B22ED9C601CF7EBC37168BF80
+:10A760008EDB03B2D748CF785ECEE36AE33B63CBA0
+:10A770007D94A77499E017CC2FAB4CC3B42E0E7701
+:10A780003225D90D749CB8B8F728BA0E852F3E1F14
+:10A79000877CB8CFCEEDB5A7043FA431C58379F847
+:10A7A000697B1C9E10D473AA6C5F0FCCC3735C339F
+:10A7B000E4934D3868840B59149C8BE330C2F7EA5C
+:10A7C0000DB8C5CCEEAD019B1CA6EC28177947F956
+:10A7D0002C1FF96B96EA2842FFA9B1D2C110AFD65F
+:10A7E000B7C7FCB807E5C56BFC7E2A77BCFE4035D1
+:10A7F0007CEF7E29D9D3AC47E8FF14F8D1A81F7E9F
+:10A8000074C1C35ACD51712DA0671EED23BBA9BCE5
+:10A8100013E88AF07EF0ABF3681FB980DEFF12FC0C
+:10A820006A84BBC0AFC6E76FC0AFC6F707C1AF460B
+:10A83000D837BD722CC6C3DE847AC8177145076C41
+:10A84000A3309EED50E97C4D2C3F6E6978D7711D89
+:10A85000C8AAA91DD97353911F6E53E91CF2D8DF02
+:10A8600064CF45BF353AAE161D578CC4D57A15193D
+:10A8700057B3027D5E98ACF3BC45195F0BF0F8DA74
+:10A8800057B7E393ED50BC72403BFD714B5BF0BD9D
+:10A89000023C9AA5B00478FFF11DFFF904EA99D4AF
+:10A8A0008CC0549C77DDA4772CDCEEE6E7A6B2C41E
+:10A8B0003ADA61E779A35922DF27365E397DE6DB94
+:10A8C000B7A602CAE6978F5986FEFFF45BDE2ECE4E
+:10A8D00001F887E53F588679BDD37FF6F633998036
+:10A8E000A77FFE66112F7FF0EDB3591ECCBBF8DEBB
+:10A8F00032CCF3752573FDB6439C3F92F8BD5EAC38
+:10A90000F7FA8D8F921E073B83213E5AD2FCA45F3B
+:10A910003F49E973AD80FAF5A97D692B2FA20FEAB3
+:10A92000373E41DFEF503CA74238EE29369E5F2A82
+:10A93000F4CD19C1BB52DF34DA3928C7C3583ABD48
+:10A940007F50C481982F93BE4BB673F898AB9CF49C
+:10A95000D2FD55FAAB3ADF9F24FFF898EBB2EF63D4
+:10A96000FE5CCB1C8DF60D1F7478EDA8B7368B7985
+:10A9700041FB41CA539965A3FD1C96B298D67592C6
+:10A98000EC27A586F20E92C4788E97C785313ED00B
+:10A99000526DDB8D72F4078E91D45E4B99258871D0
+:10A9A00019096F2A87F1003E135D49B9D49F90734E
+:10A9B000326ECC70F70CDAAD12D3AE92F90C36F3DE
+:10A9C000E968FBDAC17A887F3C265D45FB3079AACD
+:10A9D0004EF2AB987916E37B8BD2104466C479981B
+:10A9E000A2E7A1571BE7A1CF32CC4369B485D12E92
+:10A9F0006C9905F380FAC79DA534DE58BAC9F97C75
+:10AA0000B79CF373EC3C99D83792E704AADC15079E
+:10AA1000705CB34CBE561CD7F3FFA849C10B23672B
+:10AA2000B3060DDF8F8AE4EDB47E9DBC88E9EF2A82
+:10AA30007C9FEB160BCD6FE7348E87872DA15C3A98
+:10AA4000C0A18532707F77283EEE2AE7723FC2C7E9
+:10AA50003E86EBAB25C9C7F9D8DDE76A463E4EEC2A
+:10AA60004BDB44F30A0F4A9F587E8EA5D731BC13A7
+:10AA700081F4625045FC7F157D255D63F7BD24BFE1
+:10AA8000244F754B7AA7D33CC33986FD4068411FDC
+:10AA90006C1F7C33B4A747ED9F59D2FD64679B536D
+:10AAA0003C05186F6EF9521DF47CE45981A7665776
+:10AAB0001CD9DF2D2E6E7F1F715D69F09BAAC18F9F
+:10AAC000C2FD62359975E2BA521396521C4D1D862D
+:10AAD0009617B185D1AE4D98CBED5AB7F7A2E7A442
+:10AAE000B45ED5707FDA00BB36E94A6ED7BA2C6403
+:10AAF000D7EE705A16EF1A44EEBC54CEFD9F2338A1
+:10AB00008F41FC46F017299E29FD458B3B407E9FD7
+:10AB10009CE74B82DF657DABBB81617C4DB5787472
+:10AB2000B46355718E15F3970BA2EC02D9FF0BE5B8
+:10AB3000FC1CFE33D339FD641EFBF4579586C1F02F
+:10AB4000AE4D9576C9E07CF72FF00DC909AFC3E291
+:10AB500043BBC3EB48A77CEFA1BEC3ADEA53491189
+:10AB600039E3F9B254257DA479287FBFD3DCFBCC2F
+:10AB7000ABE80F3EEF20BD23ED71305629FF18FCE6
+:10AB80005E9F071AD9F74F5889A688BF0BFE57F664
+:10AB9000D4A8FDC7A38D2769FF27D64E8D8D27F436
+:10ABA000AF73D713B97C1CA10C5CB74A63D930E4EE
+:10ABB000A7D8752E9FD9E9C597AD8271656714D165
+:10ABC00053BE7F84A97306BB1FADA41FFF5C3F8FDC
+:10ABD00085CE1254D2CB2553818E1FDFF67A9A4749
+:10ABE000C773B49F927E3ED35096B005F9BC2089BE
+:10ABF000E46A96381F26C79375F391C42407E6E9E3
+:10AC0000F58DC5FCB65093FFB26A33F917BEC1C6C5
+:10AC10001B98CAF5110B8F60D1F7FFE8293D578CBF
+:10AC2000017CEB0E9347A775E526BD27D77FA59638
+:10AC300058ED06FECE6E621E878E5723BB291E96E8
+:10AC40007D41253ECB3EC6EF6F1E91D2A7E0BD5B96
+:10AC5000FDFD883C26B9AFF2594335ADCBEC618C94
+:10AC6000F550DCD24FFB0F9FA58417E0BAFEEC2114
+:10AC70003EA2EC478DE5A06B295EBDFAB6B8900EFA
+:10AC80004D8FB80BC687E3F9A9C2B272711CC772A7
+:10AC9000B760BCE757F114EF513BF2285EB32623AF
+:10ACA0003007F9E1E390FE6DD3283159A857F79D9D
+:10ACB00038BA2F6087D27305E54BDC6E628F0F12B6
+:10ACC0008F5A3395FB89B582CFB3D34B39BDD34B64
+:10ACD0002E5B957CE9EBE887425E6F4D08D1FE9CC8
+:10ACE000CCFBBAD73C385FBD3ED524E89463C8039B
+:10ACF000B3A1F703FCA22AC2DEDBF3D4534FA53184
+:10AD00007E847024DF878CDE2F8ECB0B51619CC735
+:10AD100047724771FBB87C7537A40781BFB77CA128
+:10AD20000EDAFFA3827ECDD9DF4EC7FAD5BA879E51
+:10AD300047B24B4FAC00FC391C16668D92BF924F48
+:10AD400062F57BA373E445FD770BC861FD22F10535
+:10AD50008BC8EFDA7C748A0DEF07DDECF0F6A0DD2E
+:10AD6000B5D991E2A5F8BB03E445543CCAE178812A
+:10AD7000F8D0E1E1713A07CA5D8C47E1FC0B71FC48
+:10AD80002FD0FC65BD26217F1C9E30ED93DA3DDB84
+:10AD9000A89E4DF3D3F9385B0AA3BC059B9BDF2B20
+:10ADA0001A976762B641E4F0C6A9DCFFDB5CE8ED08
+:10ADB000A9A2F169786C8A6D4EF7A6931E443CC334
+:10ADC000F7C79CA509D1F87956C88396237C7EFEE7
+:10ADD0008D19EEEA62F467FD7B511E6C76ACB4E12E
+:10ADE0007D5DAAB3E4A2ED1C12F48AB4B33DAD3A82
+:10ADF00099DA7916F95F757ADDD88E59DC8F3A4089
+:10AE00008F89717CD3381A6090F274082F4498B0FF
+:10AE1000812EB14F07C6C39207FB8ECBC55CE1B74D
+:10AE2000805CFC138EBFAEF09D17F81AE3FE4AD289
+:10AE3000153C0FE80C7036DE4B159B67116BBF4855
+:10AE4000BD23F510B4A3623B0FA3FD3226B28E647E
+:10AE50001C27B3D6CFD74B8A9FF805EC191DD78B8B
+:10AE60002AF2F806E8810A8E3FC555A6A3BEA83E81
+:10AE7000DF9B89DF1D729ECAE4F6AB717FF9F83F54
+:10AE80009EB063F967B55517B553E47EF250FBC821
+:10AE9000AEEF7EB821DA4E196A5FF9ABF6938FBA3E
+:10AEA0002C14B7DBA918CFBF0FABE0F22F49CC6F42
+:10AEB000D79480BD2215EBF93DFC40338FCBBC32DB
+:10AEC0003DE0A8C0385ABB850591EFFE519A1E8817
+:10AED0006AE752F12CE3EFC3851D35DCF18482EB88
+:10AEE00074786D48C1F879666DA7E2BB48BDFF1262
+:10AEF000EB59D6378BF667687D2AEAAB196EAE1729
+:10AF000033CF69AC204AEEF44EE5769459D8EDAED5
+:10AF1000A34FDAB1BDA3267F7B3EEA0797497F3C6A
+:10AF20006ABD9B6FF6DAAAA2E6D782FB4283D0D134
+:10AF30005721F56098F4B7D4B766A9275234839E99
+:10AF4000A88FE77C2CED9DFA72EE07D5C7737FFCC6
+:10AF5000C5F4C014C4F327E51FCE1FA5E339D8B04C
+:10AF60003925F7ABF747FAED1B536885F46390FF7B
+:10AF70003BCD7A572FD9592E3A3F21EDAAA29F29CE
+:10AF8000A3B09E47F191FD37096F1A5171AB96DB63
+:10AF90008360675D5991CAAFE48FE6031673AFE033
+:10AFA00050F3F4E27DA6A9180FECA178ED7DE795AA
+:10AFB00041CF41DC5721EDA5FEFD4143DC3553E88F
+:10AFC000BD4C51AE63DC3517F7BB8C71D1E26E23FB
+:10AFD0003CA9C7084F3E1113670DFAFE03CFF96174
+:10AFE0003E0136BA03D61FCA8F55621F342B18AAEA
+:10AFF000C4F3E1D9AC93F61B336B930CF89EAE8A85
+:10B000003C0CBCDE588E137E32B5791FE0F79BFAFC
+:10B01000E7156486BCFEEA55DFC6AB30D9367EBE86
+:10B02000CF069D23BED65CB17016D27B40FCB6C164
+:10B0300018B7CD8C2E073CACDE613C27E8F71591A4
+:10B040007FB0E85BC6F382321F1DE79BE91DD8FF86
+:10B0500057F70BFF9206F62FDB7D18E412C95D71DE
+:10B060008F703616613B5A58C17DEFE10D8CEE139F
+:10B07000CEBC8DF906DB3F3820F0158B67169C415E
+:10B08000F89B29DE0D77F03CD5E1B799C84E1C0E30
+:10B09000F282FECEC03AF03500CE5CA7939D797562
+:10B0A000AD89A1DE60E79B0CDFC37029BE2AE9FEF3
+:10B0B000B083E7E166D7B19009E7D37019AD331AD1
+:10B0C000D7C8083F00BE0CF7095C5D663CA79B1D16
+:10B0D000733E57F24166CCFB6B2ADC867501FAEFB2
+:10B0E0004005C90FAE1747A35E84217D3CE5C4131C
+:10B0F000986F377D13E3F7D924C6F1FB6C22FB135D
+:10B10000EA05E0D7A3B6990568C76C75C799300FF3
+:10B11000E25062EF4F5822F88D152C589D85F71C90
+:10B12000F68D53007EBDA27E67FB3428B7F73D8DB8
+:10B13000C16587E3DB37CCC98EC02ED73D04B3325F
+:10B14000A6E37D4098738AEB2ECE7DE51EBCE73AE0
+:10B15000AED041C1CA3866BC77A7B55CBF17F3480B
+:10B160005A479BC4F9E8A87298C78C696E99FF4644
+:10B17000F9786C0ECF0B886E1FF3B2876CFF4A68AC
+:10B18000BFE46BB46FE3E34FC357A07FD270FC18EA
+:10B1900017C7F691BE18448AEE5FB4A7B1E02EDC63
+:10B1A000CF81FE1C0AEFCF8D792A69CC9897D0DF2A
+:10B1B0009F1BFA1BFFFF603E8B07D2C37C317A2CAA
+:10B1C000FD7AF46835F968BCC1090EF28FF0FE2AE9
+:10B1D000BCA7CE2EFAB38BFBBA10AFADA511BC82C3
+:10B1E0007D48ED42F5E60B02CF987798E6B6109EC3
+:10B1F00087C2DB5137CF93BADB1D176ACEFDFF4004
+:10B20000AF744EAFE8FED0CEBCE4FE96427F2997E5
+:10B21000DE1FE217D74F3F7E81269BD22E1DBF3007
+:10B22000AAE0A5E0F728B46B8AC26B241F69BB1B98
+:10B23000FD05BBD96FC3FCCCB9D312697C85290B42
+:10B240006D949F90BA90F28DDB0A1DF4F705DAF247
+:10B25000BE653347E9E9B6C21A2A87FA94475518FA
+:10B260008EC3F0051BCF7A283E707745753AFA8B6E
+:10B27000C1069E9725F394A43E64623F94E6051FA1
+:10B28000264C3BD07714EADFDD504279680989FF0C
+:10B290004DF9575B6B3D1E2CFF899DEF6BFE48EC13
+:10B2A0006B21A3527C6D42F9A3B8BFEB1DDDA8D082
+:10B2B0007EE6BA8BEF677A3FEDA9C23C2EB682E7F5
+:10B2C00069A5D76831FAD0B86EB7225E793E554885
+:10B2D000E1F835B4B7695A2AE1EDEEBCDD0CFFDECA
+:10B2E000D033D0966A5C5F26CC6B8A5D8F9AC54757
+:10B2F000F78BB146138D2313530540C579C7CF4D46
+:10B300005F01EFB36ED2E81EDF618577517E13587F
+:10B31000FF646F1416BE5C85F08079AE32CE237662
+:10B320005EB1E396F71B4B7A793FF5C4A3DFE51DC9
+:10B33000BD90F2CFE847AE7735663E6027DB534CD1
+:10B34000740F5C5C5ED4BC98A19EF0EBFE67E106D6
+:10B35000D055B48E62F7C9FE0F3F2F64651E9B85E2
+:10B36000BE93E76BF8FEDB705C3B48F71CC6F3C08E
+:10B3700063BF2FE5DFB374BE1F678D63363C5FA3E9
+:10B38000AC8DA3B8A6D50A309EBF11F78C3D2CE238
+:10B3900070CD0AD332BCD1FD85298F5EB55D95870E
+:10B3A000FEC451DB22379D6B13FE9539D14F798C4A
+:10B3B000AC20C9E0A71E15E7D31A6FCE1D8671BD5C
+:10B3C0000428EB417F5BF3D890DE329EE21AD57BF6
+:10B3D0003DEAF1DF3EF7C90D36D4DBE81C9733D6E2
+:10B3E0003DEDC39D78BFB05C9FD673FC9E8E7E58AA
+:10B3F0006BA03C11EBB91CC3FBB0F0CFFAFD961467
+:10B40000AD9AEE9F127E432573B7E27795801CC3F9
+:10B41000BD00E2DE8F81ED6719DE87C1EF8EDE278A
+:10B4200018BAFD78C3FD0256F083066F3F3FA67D34
+:10B43000F7A0ED47DA4D36B4DBA671B9114C890B94
+:10B440000D16F7FB725AD57BB8A487CA63FB629AC4
+:10B45000C8BFB78144C37D29C13F5BD21B28AF4D14
+:10B460008DE3FBA8661023C84FC79CB53C1F23CBB8
+:10B4700098D726EF1569C3FB42A0BCCA61B4D72B8D
+:10B4800059DFB1890AFAAF467B7D3A4A52DCAF6296
+:10B49000B1767C03ED9B9AB38C72A143AC1793B346
+:10B4A000A487F2E0521D94E73054DCE1CD2646F942
+:10B4B00059E6787F03EABCB4E9DA88B632801338FB
+:10B4C0009FE54DCF588E71DE37053FB7811CA0F345
+:10B4D000A38DC376A951EDD658C2A351AFD498F825
+:10B4E000B900FA81FEDF4C1D4EF1D7D87EE5BD31A3
+:10B4F000125ED6A04CCB8B9ADF9B627DF4F7776B04
+:10B50000E62EB46BFBFBB38627517FFD7946A2BFC5
+:10B51000B46FD6DF5FC4FA96FD2DFBB6717ECB2CDF
+:10B520003D34BF65E2BE52D9DF5F707EB9DFA03F18
+:10B53000911FD6DFDF778CF35B66EDA1F92DEBF77A
+:10B540002F457F69DFAC3F99FF60B536D4223F0DB0
+:10B55000950721F31F2677641AF21F5830736E6522
+:10B560001E630F289C2F561D1AFD53E48BB3731BCB
+:10B570003D64A7087F8FCE0BA9745E88F4E8D55987
+:10B58000DC0E91EDEF692A63BE313C4E84CF820A16
+:10B5900085CE238C2D537CB8EFB603E407DE7FB74E
+:10B5A00013D63996879AD2E9B9BB49A7E763E05F1A
+:10B5B000FA282EE621F887D379DCE5810CF792553D
+:10B5C000687F54C6F17CEC8AA960D946FC37582FB5
+:10B5D00047ED98F7782D2BC27368F91D1C9F29D56C
+:10B5E0006974DF7D5CD1F19E2680B794A93AE69913
+:10B5F0006FD1078FF36C9BCEE3BF5B441E6510CF0A
+:10B60000499252017F12E6BF5C908AA973E9FCCD92
+:10B61000D5DF4924FBA6E65BBD4E378CE306A5E8E3
+:10B620003FF2001F7F15F6CDF29C2B491EC4FAA7EE
+:10B6300029A8A94A30BF500D85E0D745CE45E4DFA3
+:10B640002EBA86B124F8FE6AFC0EF4D4ABC23E7A60
+:10B65000A5D7CAD0FF0B56F3FDEC1BEE32FAA50FAF
+:10B66000D8C36EB40B1F284A61488F9ADB8CE55B08
+:10B670002C7CBD2D8AF153AF8EC90392F71F6EC18A
+:10B680005FA7003EA78B7B5F441ED055D375AEAF3E
+:10B69000B39228E95B9ECFB45AD9A0FB94B2BDBD4A
+:10B6A00028B750CEA6F8080F326F8EA97B8BF07B9F
+:10B6B000D99FFCEE61656FC6C5E2A960079EEC2DBF
+:10B6C000E0FA1EEDF5DDD38DF94A67E78EFC7E3595
+:10B6D0001B8C6FFB348C53C8F1FF6FF16BCD743E44
+:10B6E000DF57677E56C2CFDD65B1E8F376321F6C57
+:10B6F000513FACD17DC2321F90A5F71522BDFF7D11
+:10B700005ABCE71EE23F618F84DF305D88FFFAEDAF
+:10B71000F58F23DD976D38BF2ADA1B0ACF43DD375B
+:10B72000413F51F9922DCD9E743A5F97CAF7DF865B
+:10B73000A7547D80E7B9B0FC1D037F19CF6DB51C00
+:10B74000795241BFE52778DECD1CE917E3C36D0EC2
+:10B750006C37C4E34AE127292E9C551B565A0B230C
+:10B76000E78362E562D63AE3F9B3D87B14E7397A26
+:10B770003545C77D803E3AD7983343ECDB208EB108
+:10B780005E2AB727D54C13CF1F19A173FB32AF2FF9
+:10B79000277A1F449DC1ED8679F1AFDFA683E8FDCE
+:10B7A000C7A1BB96639ED4BC84D76FCB05F8FCA120
+:10B7B000EF2DC73CAA7999AF7F960BF2F6CB43FFEA
+:10B7C00087978F7BFDB39168231E6EE2E5531921A5
+:10B7D000C97438B89CF68766C87B137BE8BC762AA8
+:10B7E0001EAC98F4CD9FAAD534E8BA74CC90714BB6
+:10B7F00046E7B3FD077F7702E5945FC6797DC67D96
+:10B800004F26EE4DBC4AB2578A8BECA52BF177C080
+:10B81000E755E2BE1D932D4C781D13B9CFE4A1AFBF
+:10B8200073DF4EE47C3CBF3FA865230B18EF45F463
+:10B8300009FEE77944723CB2FF01E3C27B0193A2A7
+:10B84000C7B583DA91E3FAA4C81A542646F671E51F
+:10B85000B83E51FA7662D0A3EED82F5720DD3E7164
+:10B86000F6E5E0DF37393EE31DA2E327A97D3B156E
+:10B870004F146CE674F41EDE4EF6544586CF3B231F
+:10B8800015EF0FE0F716B40B3B726B6A20887E3D14
+:10B89000F01BE57106B3F9B986EA12E3DF61AB107C
+:10B8A000FCF59B197CFF7896755BC36B25788FBA86
+:10B8B000C29AA17EFDF9B316F4FBE71DE47FA775DC
+:10B8C000FD81B72DF47719108676D6EFB00CFA7794
+:10B8D000E00ECF5025DD0DFECAF3D9F96D29309E5B
+:10B8E000F5ABF8FDD88DBF4E9C8570E30A9C25FE14
+:10B8F0003DBD7DB3F0B365FE236DF85CCE7A9FC786
+:10B90000737F4B02463FE2FA5AA3DDBFACC168AF7A
+:10B910002FDF06D401BDB67C6366CC3D7EFC7EC0C5
+:10B9200025829E4BD2EFEDC17B0796B098FB018339
+:10B930003C8E743D9F013C8DF19179F8F7A4701E07
+:10B94000EB548AF33E9FBD59C3F370F50DFC5EB214
+:10B95000595D9F5AA81CEAE17E53DA707E0F9E94CF
+:10B960009F52BF5FFFDC2E33C60B62EF095CBE78CF
+:10B970000EDD07BE585FCBF5FB883FCE4A82F7B19C
+:10B98000F7FFD57471FD5EB35109E17DBBD7D71ABE
+:10B99000FD8165ACA70DFD99650DC6F7CB371AE1A2
+:10B9A000EFCD107A6D1C1B87EB63D30C45A373D5C9
+:10B9B000023E9DFDC757C2D07F5586BF6D06F0C9B8
+:10B9C0003A4B7802EAB9AA8C00C1B21CDEAFE77A22
+:10B9D00088EB7F13AC2492BF661EB708D6F17BD9E3
+:10B9E000AE1F600F44D90BEA40B84BCA4FBBFF36BD
+:10B9F000F2C39E53E8EF82576B3E2D29CA4F8EE566
+:10BA0000C35F0BBE7E85F516E2B8F291E9802EF990
+:10BA10008BF8DF7DCE3FBC82F22CF38B158F89D65D
+:10BA2000B1896DC4FBC4405EA05C40FB13EFC9C884
+:10BA3000573B17939C9E6871F3FB76D259F4FAF743
+:10BA40003DC914C4170E1DFBBD2AAB9BEEDB98DF6E
+:10BA500071EFA728E7F246F9BC0FC0F8B68AFBB42D
+:10BA6000B7FE5A217B767DE10B240F87015B60BF17
+:10BA7000EBD3855CEC32DE83310CE5141E68995BF8
+:10BA800048FD66C8FD0799E71BAEA27BA586897EA7
+:10BA90007F3F4BA779A7ADED5470DED92CD88C71C0
+:10BAA000A83D280B53234FB94F704D64FFBC02E9EA
+:10BAB0005997DE4BF7C2C8FDF341EACD46B933A032
+:10BAC0009E8F19F28066A9E75DB8BFDDF8DCA88B10
+:10BAD000E675A836E3FD9066B7F17EC8AB0A8CEB3D
+:10BAE0007B9EC7B8AEAF2E1B65285FE01B67285F43
+:10BAF00034A7D8005FE39F6AA87FDDE299C6384289
+:10BB0000BAF17E48BB6EBC1F32BEC0783FA4D3637F
+:10BB1000BC1F92A574525E9AC516EC0DE878BF0062
+:10BB2000BF8756CAE9712E1B5D2A17576C77E0B3A1
+:10BB3000BDC81A46BAB50FE7FBB9D6176F4F0F232A
+:10BB4000D613F6DA2AE1F9B412AAC2FD289BF01B3B
+:10BB50002FBB8B19E4F89533B91C974FE60BC457EC
+:10BB6000625C768F9EC9F3B67B2EBB587EC5A53E20
+:10BB7000FF2FC2784B6B0080000000001F8B080075
+:10BB800000000000000BED5A7D505457963FB7FB64
+:10BB900075D30D880D281F41F4A1A0262069418C82
+:10BBA0004E6636AFBB81693F3269FC986010D3ECBA
+:10BBB000E816138126D14C91AADDA255863466FE83
+:10BBC00048AC4CC6A452B5AD153399A9711713569C
+:10BBD000DB4DEB362AAEC99AB1DD31194D2A2974F5
+:10BBE000DD4CAC8C0A31E3985D77DD73EE7D8FEE32
+:10BBF000D73C12B23595AA9D5A28EA72DFBB9FE75F
+:10BC0000FBFCCEB3A503C022FC3B680BEF2B01B8B5
+:10BC100097E1FF4B01EED0CF0300A7EB5C16A50622
+:10BC2000A0E2AF9565300DDF45C05186E3F65A417D
+:10BC3000A17EF0A095CFAB880C9B94CCC4BCE7143C
+:10BC40005C683AC04F7DEE65B47E47943900C77595
+:10BC5000ECBE64952BA83F98A5605BE9BB6485CCDE
+:10BC6000E4E717ADF4BC431A497760FBF7FD666F54
+:10BC7000B822B1AED6BA142B5FFF6431B6788EE627
+:10BC800027CDE1343A3B282B5D8B011AE95F199FE0
+:10BC90001F18899971FFE676E60CE2A346F9B19583
+:10BCA0009085FFF82D97866D0036FCBD331BCF596C
+:10BCB00098B517EEE5F301F2001E05F1F3C892986E
+:10BCC000054C004DAD623CFDDCC1BF47D7D45F6180
+:10BCD00095B86E67CAF319BDA3E62C9A2F5D1A9E1C
+:10BCE000AF3E27BA2A53A67D5C8E9D72A8B8330753
+:10BCF000E0BCCF6478AF873C12BFD779BF87D3FB56
+:10BD0000A7483733233AA6D249D0EFABE8B31FCFC9
+:10BD10009ECCA7D4716B3C824FFB1934F6678E7FA3
+:10BD2000FF33958F7B59BC0ACC00011F0ACC54A469
+:10BD300087AD65F3E56AA2FFCD5E46F4FF070669AD
+:10BD4000B8FE07836FE5C95300AC0786F28671BD64
+:10BD500040FF501E2C0068B3C8DBA4695C0E9CDB5E
+:10BD6000902F1D91183F7F7B7FF5203D6F8F30A76F
+:10BD70001D8F1A1818ADE7F784E15E4726ED6B7C3E
+:10BD8000AE66C5C4CFD5AAC8BC0DF871CF69343F23
+:10BD90002D1C66C4F7612B978BC30C9EC5FEDE3E3F
+:10BDA0005B63D8609D75446F94EF137D5690504E41
+:10BDB000DA703EDDE364F149AB8DE4E600DE8BD161
+:10BDC0003DCEAECDA0F5B75A406689F35D2D8E7F8E
+:10BDD00044F7BFB0D102417CBE63A399D3FBC256E6
+:10BDE000335FC7BCE9DF7B8BB0BF0EE52F0D8F7AC9
+:10BDF0007CE38D9345B8EE8556ECE37D3D9B2C5C52
+:10BE0000FFD63DCEF8F854F9D5E4F525553ED7F9DF
+:10BE1000F5F2962AAFE3E4B4F5EBC9690FC96906F8
+:10BE200097D3CA3B66CEF7BA7C929FA7C0B98FF46E
+:10BE3000E7F6714B3E9E7776AFC3B91DFB0BCCE1A5
+:10BE40001FE7915D382EDE2F6CDBC3485FF0F08F6B
+:10BE5000D0BD8A4256D8C9488E04BF7EA6F24B8612
+:10BE6000119641FA2AC567FB503E706B85F8FCBA03
+:10BE7000051A0F54D073615F161C2AD8B333496E6C
+:10BE8000EB5579B499C0DF8FE3CAADE03F9049E349
+:10BE9000FBEF6AC075F6E37C7A3E535DAF6CCE482B
+:10BEA0007D03B687687FE4F31EF51C5AFF0724FF65
+:10BEB000D8C2CB260648F7076D82EECBBB62EBE912
+:10BEC0001E8B66F87F4EF66FE5CCF7DA00ED44681E
+:10BED000F6DB157E3A1F384D44F7804AF7E34B7F77
+:10BEE000F7F216BCAFFDEE74CED786632FC689CFAE
+:10BEF0001DA51210DFED658BF2FD06F2A7B5815B83
+:10BF000025E0CF4DF43BA2A3F58A815E6F50F57515
+:10BF10008155DC1FA248A4426E8FA525558971DA90
+:10BF2000FD01B6F3FBD9CB5EE17CDAF2382C34F3B9
+:10BF3000133FC7D7696A3BCB5A709D872D8A25135B
+:10BF4000E9FCDED4C6CD97CB00DEEE461389173967
+:10BF5000DD6D03FF3C805F773B783FDE5DC0FBFF1C
+:10BF6000DA2DF376DE4CDFDB0AAEB3F6446719D187
+:10BF7000EB78F10B3E37EE73FDB485D301C0CDE90C
+:10BF8000B44595BD1B5133D8F0FD8D01160696388A
+:10BF9000FF865B45E0477BF23EED8713DBBB7EC34C
+:10BFA000ED9CB375B45ECE24B9BAD84BFD40D71F13
+:10BFB000EA01DB8FD04F907C05220C0A709DF5B70B
+:10BFC00072F9FCF6C859AB4C72601AA927FA078FB0
+:10BFD0003220B90C748E72FBF932DE4BC173A7BBF1
+:10BFE000B2395D02D18526C1CF4526E2FF132AFF73
+:10BFF00007EFF98F2CB25FB62EF9CCFDC4C753669C
+:10C00000CEC79DEE912C87015FCEE3BA9026CE4F2E
+:10C010006DEAFB466BB0CC89F31A55B94D7D6F754F
+:10C0200009B9440A5B7C5304AD18D26DBD2A5FCDBB
+:10C030007895A939D88FB0583AEA6D73D47345A270
+:10C04000B693C1259D3D00B8A4E9B37962799B6C94
+:10C05000DB41EB9525D94B3F2E3A3FB15F536B0641
+:10C0600039D1A4FD83FC1E69C5A5F97E837B8EC9E9
+:10C07000FB7011C8C8AF8E100319E5BEFD56396FAD
+:10C08000AF1D7E5A263DB1A58FBC407E01E69A1CAD
+:10C09000FB90BFED415092FDDCA85BE8EDA85BE8AA
+:10C0A000F14C17933EB671BB554EF77617FA4B5CC1
+:10C0B000788EDF17BF97750C1FB759639560FCBC6E
+:10C0C00003D01FDB489F70DF72E4CFEB06E7BEE9C9
+:10C0D00076CFA57933E1592EDF80F24D72957ACF74
+:10C0E000852E712E4D9FD71DBB621D26B98D18EB75
+:10C0F00033F3B816D2BA7D005E233FF747F59EEDC5
+:10C10000BB19A75760772EA7D355D8ED73A35C5EF4
+:10C11000C573EC45B9BCEEF36564E3FCEB7E5F46AA
+:10C120004E6642FF3B7667F0797DA5AB725BB05FF0
+:10C130004F728FFB5D8B786C44E70DBB85DE69FB2E
+:10C140007D145B974BFA536319B13AF1FD8CE8C546
+:10C150002C8AEB6A0EAFCE25FD9BE89C8BDDC22EB0
+:10C16000B5776DD97C3957C88319F569B3EAC70229
+:10C17000DB6356A2FFE62EE0F23B78F0830ED2DFBF
+:10C180006BD10C07F9BDAB47328264EFAF1F4D0B8B
+:10C19000A32586369277B467572DC3DFE3F1E361B9
+:10C1A000B32388E302473F7D81F4317010B511D786
+:10C1B000DD1C7D7A94FC5B5B74D91589DA5F7DB3F5
+:10C1C000FAD0DEF5237E5FADFF69B74D26FB794DD2
+:10C1D00012766273E40D1ECF6EBE7DA3D25741F777
+:10C1E000FCCFC564CF02FF746331D9B1C09B371651
+:10C1F000D3FBC0A18C4EA3F8A4D563E6FCD7FC63A7
+:10C20000C93949491E97ADFAAF929E67BDB3917E79
+:10C210003567D738CD72E27D4D99C947E36BDEAD06
+:10C22000CDDD9434AF272E79E9F9A2B3B5191B936C
+:10C23000E4D2EAB1A87608B51AEDCF3A9586EB0AB2
+:10C240007E123757525F0AAA7104BBC3E36D902573
+:10C25000E47313FD87AAD81797783C136C3587CB06
+:10C26000F07D53DCA4D82BE93DCE4B8A33007C2BE8
+:10C270001610BF7F38DDB953E6FE1EBAA9FF545928
+:10C2800098FC3D046D43A54971D0BAB829968672D1
+:10C29000D3184D8B513CB42E2E5DE47D353EFAC84B
+:10C2A000F1FA8F67038F8F2E27C739180F5DD6C716
+:10C2B0004B3085CEABC54BEF515C85F16CF3D69816
+:10C2C00085FC15C649BAF18F367EF70AA338A94B0B
+:10C2D000FFBC242E991EC47B96A0B92332F4C59FBF
+:10C2E000B7917E687126F16BC040DF2B553DD1F4CC
+:10C2F000A8276EE27CE889BB6DA5D8CE53DF0F3846
+:10C300004C10C4F57BA2ABF7318ACB6E3F9C41F455
+:10C31000EA39B70AB693BE3BDCB6329A77FBBBB6B6
+:10C32000B51509F918673F5CAA7D1C8B078CFDDCED
+:10C33000272E35AEFA86FCDDE53F177FA7F83F25AF
+:10C34000FB5DF19ADC44F121DEE71E8A6753FD8430
+:10C35000667FB5758B543E8FB7BF5778FC82F92F37
+:10C36000B7BF456E998F9B116DC8E579F1B935B9A5
+:10C3700072E6F8F5E7484E534EC5F8F5B5782D103E
+:10C3800054866C94C72866AE9F81352CCCA8EF6389
+:10C390003CCE0EACB784E9BD769EF81AC6C7AD7523
+:10C3A000B2B09D25E23F2D3E1C7BBF08DF9724E203
+:10C3B000452D2E8CFB18CF83D62816FE7EDE4C7FB3
+:10C3C0008EBB86EE67E7CF6B968A75D10E0C517ED9
+:10C3D000F4F0F719703BA0C68B9A7CA6C6939F45D4
+:10C3E000E74C852F892B5E56E552D3AF99297AA168
+:10C3F000F9A97AD54F77909FAE263FFD8595F460D9
+:10C40000A2B81BFDF45C379F077CFEA277259F51E5
+:10C41000DE7D585D77B1C6B7F809179DB718E2DB26
+:10C42000285F9CC87FE6794C3ABB90FABE7E927A30
+:10C43000DCA2C60BDF941E37ABF1D7FF753D1E8B18
+:10C44000FFACC6F7BCE976FD15C96FBAB933EE2269
+:10C45000BDFB17D43B79FCB8222D9F9440C79FA108
+:10C4600062AB89F29E40ABC00142D9F2199E9FBCDB
+:10C4700065065A67F3AD421EA73D762B9BB7A142D6
+:10C48000107EF4C9128EDB3CF6DA598B82F39BB630
+:10C49000B285840735B5EAEF139AAE709C2D788487
+:10C4A000F1783954D87F92F42AB86F8E4CEB37D399
+:10C4B00065090F69CD0EEF20FC82709C7BE9797ACB
+:10C4C000820EB84FBBFAFC7E15DF819438E0CDC1F7
+:10C4D0000B1CEF090C3020FDB546D17E903D39256F
+:10C4E000F08E8EA8B00B9F74D9B93DF94412F708AD
+:10C4F00074B1F036968823AE449FCB233D1B174F73
+:10C5000028184FE425E289F657DEE5F630357EC877
+:10C510001910FB04DACC61C263868A1733EAB76369
+:10C520003E984F71A22C3F5424CE05616E57141DC6
+:10C530004EB2F72EE1F73F3BF56F3C8F6C3ACC20C3
+:10C5400097C71D4ABC342F11773C1A5ACEFDBF162F
+:10C55000673C3AEBE45011ADA7C6190EFC25FC3040
+:10C5600035CEE8889CB5505E302E9E4889235E7794
+:10C57000EB71C15992C05967459983F0A4592A3D7E
+:10C58000EFEB4BE77171FD871B7349CF35FE5C6B99
+:10C5900010FCBA76E17317CD5BFCA1E4207BFBE6CF
+:10C5A00085ADBF29127DD926D3BCAD1994875CFB1C
+:10C5B000F0890CA2E79BD802EAEBA1F392217E2836
+:10C5C000ABF608FDDB3FBB39FE2B17715C4742FF22
+:10C5D000362581BFA4CE7BC023EC4108D30C8E3B13
+:10C5E0001E062EBFA142FF72DE7F7136ECE3B88FCC
+:10C5F00090D737A2D90E8AF7CAF1B25D6827FE2E0E
+:10C600001D7AEC5524CFFEB7B97EBC68E2F28BF3FD
+:10C61000838CFA0764EEEF8864EB717CA515CF522A
+:10C62000056233D4B77B54BE15621E4AF9209E665C
+:10C63000CD1DA453F98C535F101F2BD341A2F59F3E
+:10C64000B1F877DE8D539E19949CDB688EE4CC6D37
+:10C65000C07B3D63174B3D7318E515CF85D2CDCF19
+:10C66000D55171F23CCD67B203D6E3FC8E82CC1873
+:10C67000E16710B1FC7E4C2E510E18ED5329E4ED0C
+:10C68000E3F9141B2AEC0E9A9AB7EB646117BEEF1C
+:10C6900003CA83762CE904CA3B4FD6811A07D98294
+:10C6A0009771FC5A9C31159F4F2FF417525CD15E45
+:10C6B000306C1571C58895E28AB92E6DBCC0ED4C01
+:10C6C000389EECE5CEF9AF73796BA2E749FA0CC955
+:10C6D000F89E797CBFC53DD1FEB2C8E752F65F94A3
+:10C6E000FD591ECF5FFEEB8F59DC9F456F70BF7306
+:10C6F0007D240DE21CB71B163875D4C2F3F5EB98F8
+:10C70000074D4FF2673B5C820EC7A21E2E8F03F1CE
+:10C71000DA0C1AFF4B97D8AFEFDC9AD50F929CC476
+:10C720002567193FA5C86B06E2528D880FC6D1A9AF
+:10C73000CA6D704E5BBAB0E7A9F279C92DE4FA125E
+:10C74000DD1BCFE1B920F295C056513F70A8FA1613
+:10C75000E864DCAE9C2CCE631A8E9C6F545F383C30
+:10C76000C2ED6CF30F9933284F5C5FD8A5E619A989
+:10C7700076A8237240F02D15B7F5D673BB3359DC7C
+:10C7800016281B5E9CB0D3DFF1A8766581C0714F7F
+:10C79000B81DFCBE399D0B5DF990B8BF013DF77B1C
+:10C7A0006AC6D3D3605CB4D680EE06E3FEF0C0E484
+:10C7B000D6AB5626B79E6B92E35A94C9ED7B68922E
+:10C7C000EBED99E47A4F1AE92DB25DC4030E2137DF
+:10C7D00075E6DB5924FF4F1C9993FF65F1AC190DE9
+:10C7E000AD9CC47F8B231DE424BFBF627EAEAEFF31
+:10C7F000A0B34837FEA1257374EF1B9472DDFBD5FF
+:10C80000DE6A5D7FADEF7EDDF8871B3DBA7E5AC1E3
+:10C8100072DD78BBBC4AD7CF98FF886E7C087566FE
+:10C8200009DACF346B6688A1FC4F71FEA56E7C7A65
+:10C83000B53D93F422B4302D46F29EF6D6A620BD27
+:10C840007B9AFD642446D4CD3AD8C85065A5EC57F0
+:10C850006CA4272B978ABA405FAD2DBC87E29CBBA6
+:10C86000B22A69BE46AF7D7522FE72548C06739162
+:10C87000CE3395786D2EEAF3F5A5C0F387EB7651AC
+:10C880001F00C951D8C0F9E7285C85763F6437AEF0
+:10C890003335D6A979F104F6E4749DEB17A42F0E75
+:10C8A0008ACB0DF8A8A878BD23021CB701492E5CDD
+:10C8B000C5F7950BC9DF4C3D219E67C540D9C3CF55
+:10C8C0002597ACE271B45C42E7DBA5D6BF7296CF88
+:10C8D0002D21BC2E07FD2ED5479EA33A09CF031C60
+:10C8E0007C9CB69FB356ECB7CB028CEA59C1BB19FE
+:10C8F0008F53C1315557DF386D895D6E61BCBE7194
+:10C9000082CEFF8E2956B1B744F085E85B31E0E076
+:10C9100075975F2FFDF97C3FDF47D43BB638C49055
+:10C92000E3946FE039B61CA9E6F2DB746CE96FD7CB
+:10C93000535C582A713A8F8BC7D53CEBBC9A276A57
+:10C9400079D630E58B4979C7798F6922BB74DE636C
+:10C95000A057BB98C88383EF883CB8DAEA9CD39988
+:10C96000C4A7CB6A3CDE121378AC96DF562A61531B
+:10C970001ED2A1FA29732C0DFD7575EF022BD9ED8E
+:10C98000EADEE2748E2F6D3C60D2E86DC4F76BEA8C
+:10C9900039FB4E8DF0FAC41B29754A67AD95BFFF70
+:10C9A0005B551E9DB5C0DB2D65D20E72C353BFED26
+:10C9B000301BE1E3CD18FFD3F95A42E2BC5A3DA443
+:10C9C00039267B689F8B4323BDD456B59678387E35
+:10C9D000D836DA4BFE3370FBC6C907381E6095297E
+:10C9E000BE4A5DF7509D99CBC51B149010BD96496A
+:10C9F000611A57BD4CE2FCCE69B6F37C3CC702E637
+:10CA00004CEA37087F56E59DE6A13EACC9E6FEB884
+:10CA1000EA949CBDA92291EFE72CDB3A9DE8F455FE
+:10CA200075220D37983753994A7EE3EBD689DA4F52
+:10CA30009FB3D2BD370CEBEB445ADD67A23A915657
+:10CA4000A70D783FD7D59503D2483DE12BD5472E8A
+:10CA5000F23A7120C21C052589FA516060D4CAE9F6
+:10CA6000ABD68D70BC95E60D748BFAD141DC9FDAA4
+:10CA700008DE57C173FC23DE97DA28DE979E1FED90
+:10CA80009ECFDB58B793B7C7BA97F0B61AC5A63092
+:10CA900087EA4EA3BCEE5453ABAF5B68750977A130
+:10CAA0006F496D8DAE6EC1FBA9750B73BAC8470394
+:10CAB000A72CCEBDF83C70DAC6EDAC2BDA328BE297
+:10CAC000B29B67FDB31CBC0E90CBF3CA31F9559CE9
+:10CAD000F66CCA077C4E3BD50BAA07AF58656E773C
+:10CAE00062455040F853DC4A793FD141E1F19CCB9B
+:10CAF0004E74FD4A7C3FF2FFF8FED7C1F7A37502E2
+:10CB0000DFD7EC4795CFA4ECA1F69462DF94641FC5
+:10CB1000FA7C0227EE2B9DCDF5EF79DFECEC8DC989
+:10CB200078BE57E47139CB4AEDC9CF59BD45C47DB4
+:10CB30000C7C4676ACB776427BDB6B1CDF19D705E5
+:10CB4000FABCC28E68B8FFF83A81F3ADD224BCFFBC
+:10CB5000DA3B28A798B70E1E4EE3FEFCE691B4BD63
+:10CB6000147F577937CE9A82FDAAF3695022FC913F
+:10CB7000AEBED0E43529F62CA37A82526442B91DA8
+:10CB80005737F09AB87D1FAB1B78A58BBCAFC6E9B1
+:10CB90001B467F37A58411FDC321CA33DE6867CEEB
+:10CBA00041185F47C0858B6009DEC27B8ED7959D9B
+:10CBB0009DCC29CB5F5D5FC85371868E48B699E4E2
+:10CBC000BCF904402E33AA337879BC5F05CF866A5E
+:10CBD000E97BAC529383FC592A5E407242FE3F15BA
+:10CBE000278CAA7C8CD60A7F53E711FEA64A8D4B70
+:10CBF000B479A9FCCF56FDD344B82353E39F1E6FED
+:10CC0000551FF12FB8D204E4077ABC6E5B69D27A63
+:10CC1000676AC5774BBBA86E312DB96E21EA13A99F
+:10CC2000F50ACD4E550F7E514FFC7F3E2AF0A440B1
+:10CC300081C037AB8FBA4E91DE27CE29EEF73CF29A
+:10CC400038CEE3286736887B814DE05E1C67A85AA2
+:10CC5000F9F9B10CA29F0FFD15D9A5D3A53B32C997
+:10CC60009EAC946A98CCF1EE31FC9BF0A9D5675A42
+:10CC70009703F9FFB50BCF12DDD7AEB7F0EF9034C5
+:10CC80007FB5FA4C63BD78BF677B3ABD9FCF9C767A
+:10CC9000999E7BDDF47CC5AF6284F4C183747BD440
+:10CCA0009BF8E9CB12E9CBBC99FEEBA43FD50D2A4A
+:10CCB0000EBE5EF8D7B5D1060B648EF777C78B6FC3
+:10CCC000F23CFA46B49AE3DBB9547FAD48F88BEAFC
+:10CCD00023E887A6FCE9FC50769DC807EF453F4452
+:10CCE000E7C9691075C254FE9F51E3C989FCCA4463
+:10CCF0007694FC886989D01B5690F0BF32E5D7F74F
+:10CD000025FCB02382FDFC2FC1BD55B9CE9E200E5F
+:10CD100073ABF23BE1F71B916F0607FF8BBA3F8FB6
+:10CD20007A9696E76878B89617BDA8D2596B5F5285
+:10CD3000DB54BC4CC3C9F21580AE2FC1C9F2094700
+:10CD4000CB21B35DC171BB42F50C63B8592CC774DC
+:10CD5000A71CC7A9B89D869FE56DE86714671443B3
+:10CD6000701BD997212BB80E4CA3EFF6186C23FD3E
+:10CD70000E37F03867E8A5F77B7F41DF1B0E3007E1
+:10CD8000B99FF6FEB3DC4FB7635CC3E3A1E8A7022B
+:10CD9000A7EA17DF9BB647986284830EAAFEB956AE
+:10CDA000016E37DAD5EFFAEA07845E2770A21F49D1
+:10CDB000C93851408E4FD7BE170C0BFF64F85D5F2A
+:10CDC000078CF0EF013B5A993386CF5371A354BCC3
+:10CDD000E859F53BC0097123E5EB7DEFB7BD6EEC7B
+:10CDE0007B3F8E3FEFF308BBD0E8678CD6B7997CCA
+:10CDF0006DFCBBDFA3CC61F4FDE86E55EE57A8F8DF
+:10CE0000EDAB56210FAF7E8B85299E5B0102A77D7E
+:10CE1000F5680BC76F5FAD624E13DD53C56B97AB03
+:10CE2000F4B83B81D73E4F78EDF7D09D104EBB4212
+:10CE3000E53F40989FAB61777A8CE28D672CFD05CA
+:10CE4000A48FDAF7465E15474D4F834E23FDECA9BC
+:10CE50007379EB6A68DC84F1CE2B7506F8CE558FBA
+:10CE600058F7977518A7CF07A3387D7FDD745D9CB1
+:10CE7000CEFBA971FA9F0AAFF5D03D8DCFFFDF93AE
+:10CE8000C4ED1EAF9DDCB84D7506F1DF0E153F49B0
+:10CE9000A56F66BD66876738B83C8D9D1F443D57BA
+:10CEA000C5BD86543F1762F26FEFE7F52F0BAF7FDA
+:10CEB0006976263445ACFF816A5FB4F6A6DA862C23
+:10CEC000C6380DAB177EEADB85CAFBC4C7F2D7F4C0
+:10CED000B8D9827E3D6E766F2447D75F18BB4B373B
+:10CEE000BEFAD46CDDFB9AF83DBAF7F79DAFD2F5E8
+:10CEF000970E7F4B37FEFE4FDCBAFE7746F4B8D96B
+:10CF000003B7F4B89926DF2E9488E4791EDB0F74FA
+:10CF1000E38A5AF5F72AEED4DF6B5697FE5EDABA4B
+:10CF20002541FDFDE684F4F7CB215CBFE27F8FEB6A
+:10CF3000FF4DADCCE97F2C3AC74EF376794BED141B
+:10CF4000C74C2F14F2AA8DFB1FAC27E8D970300014
+:10CF500000000000000000001F8B0800000000001F
+:10CF6000000BE3146060F8510FC1D3F9191836F3C0
+:10CF700023F8F4C0C79819188E83302303C33E20CA
+:10CF8000DE0AC46B80F83D0303C352203D078827A7
+:10CF900003711710BF048AD5B1623787858D8181EF
+:10CFA0000D884F02CD3AC54CBCFD8A7C08F6215E47
+:10CFB0000686B5407C9497BE6130D8F00C41FAD912
+:10CFC000F50C6AD76ED181F73708B38A3330304A0F
+:10CFD00020F8FD12A8F26CE20876960C65769501B1
+:10CFE000F50300295128158003000000000000000F
+:10CFF0001F8B080000000000000BED7D09785445F0
+:10D00000B670DDEE7B7B49BA3B9D90952574802000
+:10D010002A4BCB1201113B2189010306440928D276
+:10D020006C2184249D01661E3EFDFF6E0842C4D122
+:10D03000898A1AFC195F83E004079DE0A0139DC054
+:10D04000348B8833E804C70597795F401E2042126D
+:10D05000A338E8F3C9AB73AA6EBAEB763769B7FFAA
+:10D06000F97FFF840F8ABA55F7D4A9B3D5A95375B0
+:10D070004F14924292FA1372097E6E20E455851085
+:10D08000FAA8BBEC903A87CB0383ED6BBD2EE2325E
+:10D0900012F280D784E57A6F3A715D419F8FD61581
+:10D0A000F92D84DCEFB5E3F3C7BD25583EEA2DC565
+:10D0B000F211AF1BFB3DE42DC7F257DE1A2CEFF542
+:10D0C00016617B9D7715D66F5416A4C1B884B84CF1
+:10D0D00059C984785E1E387203ADADCF1C9F208F76
+:10D0E000A6F5BFEA893E8BBE375A2EF20FA50D7208
+:10D0F0004951D6E8603F15CF1B95BCBE00E7F1B1A2
+:10D100003AD6CF54F35A76E47E59640CC573AC8C8E
+:10D11000F8134BC9E4ECE488FD0603BC4786B279FA
+:10D1200012BBF3B54191E15D0DF01E1ACAF14BB689
+:10D130004F1E14199E13FAFDCAC9E1A5771E1E18C9
+:10D14000B9DF18E857E7E4F0FAFA4C03228F3B1EE8
+:10D15000FAC5C0278A1321BE16A33F3BEBFBF38B16
+:10D16000B8E85F8A4FC75EF3D60D12F26F1AD06926
+:10D17000AD7DF9992D749CF696614EBD8390CF5C80
+:10D18000CE04BB2526BEDD02F388816FA5304E0C90
+:10D190007C9B1B23DF1640BF18F8B604FAC5C0B746
+:10D1A000CA18F9F6B39F08DFEE053CBE07DF36C4A8
+:10D1B000A86FBF8A916F1B63E4DBA618F5EDC91851
+:10D1C000F9F65428DFD4E76AB9834868176F544AE0
+:10D1D00076403F4F669B6D40D64F827F7BBEA7DE79
+:10D1E000ED8F917FAFC6C8BF23409F18F8773446B4
+:10D1F000FEBD1323FF3E8851EFDA709DB1C85FB5C5
+:10D200000D21F8736900FC6BB19FBA9AD7F580774E
+:10D21000122119E172A09694A3280F3271B7B37549
+:10D22000ABE09B4B3984AC30D1FFD2F77D7924A0A1
+:10D23000A7E3FB6CC45F2B09FD3F073C09C9FFE670
+:10D2400052AAD0DFA78BD89FE8A0FD61902BCAFF20
+:10D25000CDDE2158D67339DA5CA44379F0251B5012
+:10D26000BE9EF03AB1BDC13B16CBC7B85C6EE4724E
+:10D27000F400C8DD152087A55CAE98DC1152E228C9
+:10D28000A774EDD8134F363850AECC12E02933795D
+:10D29000BB77CF955B3750F89B6B74576E0B91B390
+:10D2A000278A54F9A292991CECF744F909DB82A170
+:10D2B000486F1BC06928D6A9FD7CA1FD1ADCDDFDE5
+:10D2C0007A41BFC78AB97CC924103AEE63A5DDFD57
+:10D2D000D2254A977B2552DA6409E7CB1489E929DC
+:10D2E0005514E487CCE9BB3FEF2C69A3EFDBEC23BB
+:10D2F000D3082D9F04FD44FD7360A9BE5F4FE9EC88
+:10D30000A6F4C834929A26C097B44A0AC5571EEBB1
+:10D310004804397A689C8B485642FA433B1DBFCF7C
+:10D32000E8369245CBC4F16D441A06FD683BADA7C3
+:10D33000F0F68CA1B49DC27908DAADC1F654DE9E38
+:10D34000E6E0EF5FC7DA1FF6121C5FED771FE5B36B
+:10D350009BE2B78EE28BCF8B890BE8285376FA439A
+:10D36000E63F5BD2E3BC2B79A9E27F5FF6A98CF99B
+:10D370004383F89A075FCC981F82DF7D83E7605D67
+:10D38000C5C77C4525D6FBAFEA4D3D31AE0F249C89
+:10D39000CEA9330708ED0ED9897E9AE3889EF82836
+:10D3A000BF1C543C23F1E70B2ACE3FA8FEB9183D21
+:10D3B000B4ED776BE8B02E43A483A1B7488775BD61
+:10D3C000453A18FA5C9E0E532407C28F460F75DC4F
+:10D3D0000D578AE3C65D258EBBE12A71DCB8AB7FB1
+:10D3E0009871D7F713C735668AE3AECF14C735F601
+:10D3F000FF7EE312D9491F3273411CF0CF3CC1BEFE
+:10D400005D20EE8741BFC1CEE99383764EB697107B
+:10D41000B725C84F22D3977342E1DC29D8550AE7D4
+:10D42000FF7038AECBC3B16BE0CCD5C2D9C6E190AA
+:10D43000503B1D0687DCA19DC76FF97B015DC8F8D5
+:10D44000747D2525D6D0F79C9AF16FD78EBF1BEC43
+:10D4500018CC4377D9F11D1ABACED1E2B387C321D4
+:10D46000BACBD183D83570666BE11CE27002D2650D
+:10D47000E1946AE7F1BACA574958BF283D8605DFEB
+:10D48000EBC8EB3C857ED08B8A633B6D97FE640DC9
+:10D49000DC40FB1FD922F98DB41ED81B8FEBC7F9D6
+:10D4A0006DD3B1BEEF1A23AE13E79D93FD466A4FCD
+:10D4B00026BDF0B60DEC4BD50B7A19EABABD1FDBD1
+:10D4C000DA285E1E63EB83D7D1E79D2FE8C9569417
+:10D4D000C6421DD0FD14974DB28AD5CBCCAC5AB5FF
+:10D4E00065DF9D00B7BCD948CC144ED54B4BA65D2B
+:10D4F00047EB4B0E2B04BA546D5F6DE84DEB4BFDC3
+:10D500005213D43BF24839E8D39ABDFFD90EEBD180
+:10D51000F9DD4A368C7F96AE130E6A8F8F585B53B7
+:10D5200067523C2AFCBB0AE1BD8A9D92935A388A15
+:10D53000EFF6431980EF0EC969A4F45ED6184F1CAC
+:10D54000AABDA37F4FEDD6E3FC97D3F9130A6F0969
+:10D55000A92F047A560171607CA7D16F9682FA7662
+:10D56000D67B18C753EB553BE878F4FDEAE7242750
+:10D570004CB55A47DC8067FB4BE6D2A72C30CFD5A1
+:10D5800086C15698DF7A03F45BE29FFFA2D9017847
+:10D590006E311402BE9BB718CA8602FDC8BC92A1A8
+:10D5A00080DF5F44FC1AF42E98EFF26B8C5BF5C0C1
+:10D5B0004F4B60D00C6BB89D3D4BD72B47C8FA59E9
+:10D5C0004198DD27B2DF307D58F0F94BFA4494835F
+:10D5D000658D7AE208B51B5C3E7C4709F363F6581B
+:10D5E000FDDBB3827C5C6EE7F2CAF9B83C91F3557F
+:10D5F000EECC99312C1C9F07812F46E61F41F93054
+:10D600005D371DE8FF38907E8F51FFC981FE911371
+:10D610009F3F41FD242837533F09CA27A99F04A5EE
+:10D620009FFA49D06F2BF593A0DC46FD2478FE3499
+:10D63000F5CFA16CA4FE393C7F86FAE550EEF4FAF2
+:10D64000F0F973DE3A2C9BBCF5583EEF6DC072B713
+:10D65000D78FFD5EF43662D9EC6DC2E72F7B9BB1AC
+:10D660006CF106B0DC0B7CA665C0DB8AE57EEF3191
+:10D670002C0F7ADBF0BD43DE3358FE92D3DD3681CA
+:10D68000E4CA545E6C2E6207362515BB72C15F4931
+:10D690002A61F5D43B7CB9065A4F75D33AA563EF9E
+:10D6A000CA40AE91D67BD7B0F6CC7B489E89D633A4
+:10D6B0007DAC7DC02F5D79665A1F50CFDA076FF6BB
+:10D6C000E5C5D1FA603F6BBF6A67202F9ED6AF6A6F
+:10D6D00062EDC35BC8240BAD0F0FB0FAC823AE498F
+:10D6E000565A1FD9CAEA391FFA26D9683DA78DBDF7
+:10D6F0003FFE5C605202AD8FEF64ED13BF26F976FA
+:10D700005A9F4824ACE75972F313693DCFCEEA859E
+:10D710007DE7CB8E08EBFB5EA56D2198B49FEB7285
+:10D720007265EA27EC35B4AD0093BB5E7743AE3C3F
+:10D730008ED24F218BA07D93AE88D50D6425B4FF8A
+:10D7400056371DEBFB1507B6EFD1CD61758303DBB3
+:10D75000FFAA5B88F5838A0BDB8FEB2A59DDE0C2D9
+:10D76000F6CF743FC7F10E296E6C57F4FF9BD50DB1
+:10D770006E6C7F585E9F9B4FFB57EADD1E1D95EB3D
+:10D780005AC95D4E0682BC36A5833D5CC7FDD6599D
+:10D790003A07CAFDBA0C03EAD9DEFFCA790AF50CCA
+:10D7A0007E92A15EF634F8BD14CE2A84A35038FAD6
+:10D7B0009EE14CFC66AC0067E237E52A9CD508C7C1
+:10D7C0001C1B9CBDDF8C17F1F9A64285B34147EDC8
+:10D7D0007DAD35B6794DBC3441C4E752A50AE71199
+:10D7E000C42731367C02CAB5029C80B24485B31985
+:10D7F000E1A4C4868FCB304E80E3322C55E16C47D8
+:10D800003819B1C10918AE13F1312C53E13C87F43A
+:10D81000E917DBBC5CC6EB457C8C552A9C3F203E5F
+:10D8200059B1C1D96F15E9B3DFDA4D9F00C2C98E76
+:10D830006D5E7936913E79B66EFABC8670AE8C0D0F
+:10D84000CE7E9B489FFDB66EFABC897086C536AF0A
+:10D85000BC04913E7909DDF4F900E15C131B3E073D
+:10D860005344FA1C4CE9A6CF49843326367CF25344
+:10D8700045FAE4A776D3E73CC219171B9C83A9227B
+:10D880007D0EA676D3E70B84737D6CF3CA4F13E944
+:10D89000939FD64D9F4B0827D7DD88F8100AC71AEB
+:10D8A0001DCEA17E227D0EF5EBA68F490F700A28B2
+:10D8B0009C813DC329CC14E95398D94D9F443DE840
+:10D8C000C5E4D8E01CCA14E97328B39B3EBD119F80
+:10D8D000A9B1CDABB0BF489FC2FE8C3E1E63E7240A
+:10D8E0003BF88D89C4B995BE3229F9670761DD51CE
+:10D8F0002CC409608F48816D009FAEADE897CA4E79
+:10D90000D50F7212F0738B6D0E27C403F4AABF43B8
+:10D910005A713F62D99928C49B5ED2E70D077CAD4E
+:10D92000D42B0CF57B12C6C609FE56A22B49A8F7CC
+:10D930002AEA2DF44F291920B4A7955E25B467B8BB
+:10D94000470AF53EE5E385FEFD6AF2847AFF55530A
+:10D9500084FE59BE19427D60DD1CA17F76FD02A1C7
+:10D96000FD8A860AA1FD4AFF72A17E75E3BF0AFD0A
+:10D970008735AD11DA47346F10DAAF093C2CD44744
+:10D980001D7E42E83FA675ABD07EEDB16784F6718F
+:10D990006DCF0BF5EBCEBC2CF4BFBE73BF50BFE117
+:10D9A000E29F85FEB9E46F427D92E903A17F81FD8C
+:10D9B00023A1FDC6F44F347EAC18BFA8CD25CC9F63
+:10D9C000CD30A03F1BB01AB06ED86B66FB1BA827EA
+:10D9D000431CA218EB86FD0B1DC9100F0000D49F3D
+:10D9E000C8ED5D7E05C4AB7E31DE7D05C4717F610F
+:10D9F000708FB047F083DA65F73D7A8C27B64A24FA
+:10DA00001D4A870ECA383D8F271899FCAECFCA79B8
+:10DA1000CA17A20775FDA87F41EBEBF5148F3141C2
+:10DA2000FD59DFAF2C7D7EC838EBFA194AB70E6579
+:10DA3000CF175A60BC92FB603C8FA17330E0A51DEC
+:10DA4000C73860AC308E29B31CC7D908E3A404C71B
+:10DA50003166966BC631956EE5CFF9388F81DE441D
+:10DA60001B67FD80F1E27C322B709C2D9A71D6678A
+:10DA70005668C68963F3A1CFF9384F5D6E1CE3C0C9
+:10DA800009E27CFA57E238CF69E7D3BF52338E05FB
+:10DA9000C781E7300EE94B77316994CFC6CE329417
+:10DAA000833F99314E66E853F11BA8930FCC241B9A
+:10DAB000C671D071693F3224890A3521FFA24F42D5
+:10DAC000FE7C1147F91F124F0BEEC77DB8AF5FCC3C
+:10DAD00051247E8A11DD275573D95CB4737AE60A26
+:10DAE000072D9B0F0C7A04C6D9687566D37A7BF331
+:10DAF00024C3C208F2B4B85E39D51622E7DDFBB301
+:10DB00003C32A4868EBF22CE8EF8A875B54CD28941
+:10DB1000CF4FD07D17A1FB930FE93E85D0FDCA47BB
+:10DB20000ADB67FE3BDD9F41BD8DEECFA09D90D50A
+:10DB3000F8DE091E673EF14BC90FF4FEE2AE9F29E5
+:10DB4000B84EF8C85BE9A9104D603FF356C553269F
+:10DB500004F19BEFEB25D4A939EEA34BC77D2DC66D
+:10DB60000F3A5F32FAB7025DEBFA509AF27E030881
+:10DB70007977EFD443920DAB7D746309995933BD26
+:10DB8000200DB548EAB79CE23963F7350A7D83B4C6
+:10DB90002B6D773A2D41B8C4A59C00FA98E81F80F8
+:10DBA000734B11AD878C7F6B89589F45E4609DF264
+:10DBB000FBA47E0061F17F3EAEC3A5005F4BE81C75
+:10DBC0003328AB674139129A59BCA6D4CEDE55F141
+:10DBD000F12C544800F7D7BE148863135F32F69BCC
+:10DBE000A3EE9335F8952A265709A56BE97C3DD21B
+:10DBF000558BEFFB7BE35DBAE1B4AC7B4481D06C29
+:10DC00004FF8CF768BEDA49C8DA7D2559597539C5A
+:10DC1000BF2780FFB43C0DFCA7789FE4FC0FCA31FE
+:10DC2000E3BFC7E89E06FCEFDCA427C82FCEF7DBD6
+:10DC300038DF17D78B7CBF0DCEE368FFDB5666B1AC
+:10DC40007853432F81BF74E2221DEA1F2AA0663554
+:10DC50000CFFBF73399853B7EB1560EFEDE59AF9F8
+:10DC6000713EDCC9F93057438FDB38DFE672BE2DD9
+:10DC700021BE7B33307EE15720AE37BB5C22602F64
+:10DC80003C77AB7C6B13F8E656F9A6C1F74ECEB7DE
+:10DC90003BEF627CD3E2DDC6F9D6D6F0994206842A
+:10DCA000E3ADC573DE2ACDBC7C5ABED573B9B41BB7
+:10DCB000C09F9AEECA5D7132A4FF2D4593579C0C0C
+:10DCC000B10BB7964C17EAB34A670BFD67BBE70B7E
+:10DCD000EDB7972F15DAE7D6FC4CA8CF5B7597D038
+:10DCE0007FBE6FB5D0BEB0EE3EA17D71FD43427DDB
+:10DCF00049C326A1FF52FF16A17D59E30EA1BDAA7B
+:10DD0000699750F734BF24F4D7EDBDF26690AF2386
+:10DD10006FEB09C4FB2E384F639CF1825371429F15
+:10DD2000935E07CAF129EF102CCF789D28E767BDD5
+:10DD300063B1AC06991C0776F68005E2A79E386AA7
+:10DD4000F713E93A2E8F5B533701D61BDA3E9E90CC
+:10DD50007F956F58E3EB4BB500E2DE94FEC50D06F0
+:10DD6000121845A874F7EE96E74E7D487B5B0FEDE1
+:10DD70000D3209F40A6F2F6E8BFCBC43EA1C9C0128
+:10DD800071D9F78C647B48BC31FCBC85F401BF229F
+:10DD90005AFB391D290F3DEFD92AB3739E23FABCD4
+:10DDA000AD32C5ABD2C0F4BFF2F98C3C62837A606D
+:10DDB000708DE532E3355164D280CF0305BD5FD26B
+:10DDC000707550CF098CC3ECE952FF28E1F9B2C657
+:10DDD000EB84F7DE90DC5B008F73FBF4B85E93C0DE
+:10DDE00081CC5B86017EAEAD32ACA3CD29E877B5A0
+:10DDF0007A5D2B4E2A84BCE92DC2F22D6F0996EF75
+:10DE0000784BB13CE67563F9BEB71CCB0FBD3558F6
+:10DE1000FEBB7715966D5E1F9627BC75589EF4D68F
+:10DE20006379CADB80E519AF1FCBB3DE462CCF790F
+:10DE30009BB06CF73663A9DACF9EE4EF0C5F5FCF3F
+:10DE4000821C1AC3E5ECE0DA796BEAFA06E5ECB07D
+:10DE50005C8672A6D2B7B8C1C8E521559087BFC20B
+:10DE60003A9C02F2D2437B83C2E530DAFB91DB417C
+:10DE7000DE7AFF08F246C81A94030BC8DDF7903724
+:10DE800002A70829204F7D34F224CAA12A47AA9E5E
+:10DE9000BF21959C03F952E5CA22337F4895ABFB1D
+:10DEA000C14F8CE06FF55624BEFE31FF88047275B9
+:10DEB00040B2E5FCBC82F85C58EFE263D75270AD2B
+:10DEC000D04FF60F8175A46BC8578321BEDF758CC8
+:10DED0000A4156F4F969E5253ADD5DB87F28F35328
+:10DEE000E6F70A6F37C731BA9A75A4888C84F3E5D0
+:10DEF0009C636ECACFB83F5D3D12F6CDF4B94C922B
+:10DF0000008EDF393DC27901194490CE3DD157EDE5
+:10DF10007FEA89FFCC81737F0BE8399D7BDC017D33
+:10DF20000DD3DFA79CB7849C2F798CCE7488837720
+:10DF3000661BECCC7F9824D2914CC2F303958E07DC
+:10DF4000B2BF180CE733F7513904FDEA1A343881AF
+:10DF50005C463E7AB2F73DD17301CC37267A1A0877
+:10DF60009C73517A6E85FB8EB1D2B3273BD9937DDA
+:10DF70003CB181D1F908F74FA3D1593D0FD3E271DC
+:10DF80008B22733E7039267768E85F2AD0BFAFD501
+:10DF900081FD0FEEFD2013CEF1BA765F91408686AB
+:10DFA000BE5FC0CE7BBADFCF17F440FAD3DF336158
+:10DFB0007F7CF08577B15C4B981E6EB494CC55C6CF
+:10DFC00004E1C57A8F20DABC3C8A24CEAB07FDEC95
+:10DFD0004855F5B33513E46937B70361F3EB413EB8
+:10DFE000D5F91D80F951385341A6E93CF2E592BBC1
+:10DFF00084F98D4EC179F7343F4F82814823287EC2
+:10E0000056838124507954DC6B15DCD739DB7C10C6
+:10E01000A7D81BEFACA52CF1D8CEBE1170C07B6287
+:10E020003C6359A3B946F49F126B44FF29A326D43D
+:10E030007FEA3AFC94CD4DF15B9EAEAF39D90BD659
+:10E0400039175FE7D8BAAAE257D594556311E0882B
+:10E05000F5AE7AA988DDC37124CC8C70DEA796CB8F
+:10E06000D30D38CED9C6810930EE59AFA986ADAFF0
+:10E07000F61A366E7A4DE8FA5AB92ABEE6E4A820B6
+:10E080007ED1E0FED0F85189201F99605DA46D0318
+:10E09000A3F78FCA4FF973039EABB7285F80FF6E5B
+:10E0A0001EA2FAEF32D655B89E26BDCF38029EEF9B
+:10E0B00014C6A3EF39D4B371782FBADCC8E494CA7C
+:10E0C0004F3D9C7711BE3F30219FDD14620285D702
+:10E0D000215BEA40AEFC0AD3670F97D32A539BC15A
+:10E0E000ED4072B7825C2F18ABCAB963D607D44E25
+:10E0F0007FFC1705EF9991AF29F49CE0558745A463
+:10E10000C40641D505BB9715C3BAFDF18B37F17D28
+:10E110007A7D0ECCFB3CD115815D3A4FDEB48D0A81
+:10E12000D1D7D30A8B63913AB6CFF1D13F30BFC577
+:10E13000F5E2BE674983582F233352C1DE966D54F2
+:10E14000889FE2BE14F64DEABCA9FD7D57B123724B
+:10E150004B48CD3AD8A73FA6B078CF023B91FB50B1
+:10E160007B5DF5875FE740DCA75D61FEAE7A1EBE92
+:10E170003489ED072B66FA0D2EDAFFA3DDA36EA31B
+:10E180001697BEEF5F87FECF74E2DC4EC2E9BEB0E9
+:10E190004EC4AF27FCB5F8AA7E50D8B93CC723B906
+:10E1A000518A785FEA6B6EE754FD4832D885B84FE4
+:10E1B0009AA6AECA81C2E5C0AFB8AD8614C677E0F4
+:10E1C000A324771ADC21FD0CC17E498631D1FB19CD
+:10E1D000A19F1EFBA5B17E9D85B83F26549E860655
+:10E1E000FB9983F0FAB271C57E557F78F6451F958D
+:10E1F000978ADF3D6A2374DDFC58AE4F75D2E795F0
+:10E20000DBEFB5B9687946F6D9809F1FFBF511EFB2
+:10E21000FBDE6250E9E1B248104FE3F249EA7C18B4
+:10E22000A7F862BB62C773844663C048E5B37AF758
+:10E23000D262321CEBC7597DFDA77AA8378BFCAAA6
+:10E24000F8CDA3A90E764F88C5934800FDDCEA6D92
+:10E25000FF5108EB858774A29C69DF83F12F26A10B
+:10E260005ECF372484B7E3C5E054789FFD7876DF2E
+:10E27000FFA9DE06E5E4D3A0471E8D9C9473BF156D
+:10E28000E805FBFD7C833519EDFDB5E45AD07795A3
+:10E290002EC4CFFCD7DA1D8F0F3F4EF13AB7ED2FCA
+:10E2A000366968A89D60F2D6D5B4F0DF4CBAE8F6BE
+:10E2B000A49DCA63A89F4401E37B8E66EE77B7B046
+:10E2C000B25209D8E03E4EE516C5492591543EAB01
+:10E2D00027703F81BC67F4437C74D9B3AFBC339ED5
+:10E2E000D27FD92E25B9984DC722A506F9E3A17F83
+:10E2F000578D0CF2A3E2F7AF181CC3D8F37B9282C0
+:10E300007C59B66B9F810C0BA7E3A4A67D86364B88
+:10E3100004FE341D2F84F5B676C73F0C1057FC78E9
+:10E32000AF44D2B2C2DF2FDFF20AAE7B4027E42730
+:10E33000E75737FFC2F81698F6F268EC67077BD804
+:10E3400013DFB2613F9782F2FDDCCB708FE97DA3D2
+:10E3500013E850FEDC0A1BCCE7B45CC3E4FCD7F73F
+:10E36000A682BE972BBE543B96EC79F9933F47F9B2
+:10E370005B72F4E7A9E83F1057860E6DB32F03E6F2
+:10E38000B978F3AD38CF32E246392CFFB5BE04EE92
+:10E39000995E9049D1AE087AF21703DBBF9CDE4A42
+:10E3A000994BE7791AF003FBF6A6DEBF1DE3E63FC3
+:10E3B000C37B703FE773A62B21D62F9818BFB618E2
+:10E3C000746A3CD424C8EFB6F5ADC0A7B3FD5C6950
+:10E3D00070EE41E9E0E374932E51B8FAA305698C1D
+:10E3E0004FC421E7F0F7A8BD9F04CFA17FABE23275
+:10E3F0000F17DEE3F6918DBF928F4FF18E83F5EB11
+:10E40000746A64FFEF1F7C7EF4A79584C85988BEA8
+:10E4100033FDDF761FD37755FFFDD38BA0FDF3B718
+:10E42000981EC17BB05E50BC0269D8BE6FA684F650
+:10E4300081EEB323E9F93685EBB9D84E7738B8FECB
+:10E44000AB7242F197A5845079A1E324211F707F1C
+:10E450005CB691BE1FE29779605CEC67083E0F598D
+:10E46000379670BB7048630FC8E69498FCE84AC5BD
+:10E47000FFF413A0BFEF199D3E07E8AF5202F3FF70
+:10E4800064E78177E65039FFA449D55BD1AE6AF5E0
+:10E49000B6FCF9312492DE7E62A1FBAE487A4B9F36
+:10E4A00047D45B4B1BCAF3FF2DBBAAD2AF5D433FE2
+:10E4B000B08F2F3BA2D3516B1F37181C11ED23FDDA
+:10E4C000798BE484CBA12A7FAADC55FCB6AA3FD87D
+:10E4D000A16EF954E5AF5B3E55F9D3CE57A49FB674
+:10E4E000FD0FA0DF14AFDB4D9BA681FF6CEA241863
+:10E4F00087CF9DA9C77B9AA6CF09BBA771473CD6FA
+:10E5000067E9DB7E0F3EE10755B386C13A7F3BF1F9
+:10E5100029ECDCBE5E413FF6EB4B9726D0F9CCE10F
+:10E52000F4BD9D927B2AE547A92C05E2289EB365A0
+:10E53000E24B488278B2444E84E0717BB958879FA1
+:10E5400089A941383DF5FFB67EF7772D8F52BE9EE3
+:10E55000C826E46F50E2FE833AD621F234BD859D91
+:10E560006378464BFE01A8876D7249C83EC263645A
+:10E57000F6E768FE2D63807EB9B3862530391F8C9F
+:10E58000FB450FB7635D3E4702D8F7AE9681B82FC3
+:10E59000EC3ABCD0EA8E60CF0E70397B859FC37495
+:10E5A00058A47A3D95FB0ED2897E8DCF628E189746
+:10E5B0009B6354ED34E71BFDD1D3F14BB91CCEA6C0
+:10E5C000AF268C0CE1DBCCA91FCBB6703EC0CF8947
+:10E5D000907DC5F7A52FC835D0F780B9ADB02442DE
+:10E5E000FCA692D36FE2FE2F0DB0EEE5B7E4CA4071
+:10E5F000C77C8B5E88872C32727D1D4A86025E1333
+:10E60000F72F7D600C9563CF61BDD34CE7E769F9C7
+:10E61000D4E08EB0BFD3D213E0837FB9D5C8FCE578
+:10E62000B79592C540D7B76F65E7BD7F3338AB224A
+:10E63000E1996E66FEE66C527261B4F4D3A36FEE9C
+:10E640002C6B208FD2A3CBC2EE6B87CB1FD3FB2EBC
+:10E65000BBE45F2D811CEA593D99DD6F2E24EE0746
+:10E660002648A8EF3784DAAFDCE6E9CFC27D9AEA24
+:10E6700016C9AEA3EDD5729B01E4D8D3BC4B06BF3F
+:10E68000FD260771E1FE5AAE19363324FE45973D4B
+:10E69000A4D781AFE6CC05FA7E36D348002FD7D079
+:10E6A0004F6DB0FE7FD6320AF520DABC5EF7926974
+:10E6B000F90AC061F64C2B0F85C9F142FDD649A479
+:10E6C0002F9C034F34B6AD7046E05FBE89C959CC6C
+:10E6D000F6CDF4FF997D9B40ED1B936B25D4BE597D
+:10E6E0004C61F62D2D927D5BBEDA910672B17CCF26
+:10E6F00040FC7E6BF96B8B5322D9B757F9BEF735C7
+:10E700007E0FBCA32FB56F2342EC5B5F6ADF22C490
+:10E71000C9BF88D5BE99FE67F4EF55B06F11E66B9F
+:10E720003689F6ADA86535DAB7A2BE7AE1BE1231F8
+:10E7300051FB167F39FB36FFD15BB1AE38E323C8FE
+:10E740000FD015ECDB6BDCCEC13860E76E30B1F872
+:10E7500066AC76AE5FAC76EE7F88CEAA9D5BDE4F70
+:10E7600042FF255C0E999D5B9EC5ECDCF23DCCCE54
+:10E770002DCF66764E6BDFF2C2EC1B7BBF7A087D35
+:10E780001FF78F598FDF01F7094B15A789F62F76F1
+:10E79000A8DF4FD48C09B577379864A47398BD73FC
+:10E7A0007E8ADFC1F464EFFE0AF62E1BEDD820D07E
+:10E7B00023AD7C4C19142FDC677BFBCB53BFFD1DB5
+:10E7C000E8CBEB7ABC2FF4AE8EED8FF67E796A142F
+:10E7D000E8DD4326667F9798183FDBBD3EB4A793DC
+:10E7E00086327DAFBA87D1AF7AB7C4E6BB52EF7736
+:10E7F000C03AF0D545DC3FCFDDC3F6CFB38CAD29B1
+:10E80000F1702FE95F14C2BEFB20C5F343E4A1F40D
+:10E810006205C6019F8FB36D85FD65A94C4CE0C7AD
+:10E82000CE3B3CE563F05FE75DAC43BF771E3C87C2
+:10E8300073127E4F42BD4731A779D72B7D48F8FD33
+:10E84000888946C687892B24FF962CB88F20B6CF9F
+:10E85000D3F8F5EBF83CA93F8B74217FD5478CDFCB
+:10E86000ADD3D2C3C9E65FB5522FD2A3468A480FB3
+:10E87000CAD1E2F9A9C1F9CF7DA16D5D1F685F2AF8
+:10E88000E17E4AA587769E2A7DD4FDCA3CAE239EB2
+:10E89000965D0AF04B3B7F957E61F356E9A9997F1F
+:10E8A0009D6A3FAE26C340DFDED5B91F1803F2F1E3
+:10E8B000674A078AD76DB3B3D342EDF183DC2E4D9F
+:10E8C000751FCF4F7500DDD8778973CA77BD924A1F
+:10E8D000E773B32B6B247C3F7CEB570637C4170ED2
+:10E8E000983BD1BEA9F2F50997F70087F3766F7BC5
+:10E8F0003EAE23CD921DF526A0B15FFCFE98E71E2B
+:10E90000A65707A47FACEB331AE90ACB002954D7EA
+:10E9100021E003FDEFD416C6070FF081FE771AE958
+:10E920003C0474AE4E969C01E8DFBCEB5E909B57B6
+:10E93000CDF439E86FB9E464DF97114B46EA65E539
+:10E94000538E249F189CC809AE8BF3A05F52B8DF8A
+:10E9500031D1D8FA36E03191EAC31612EE87A87C9D
+:10E960001F42FF5C8A74EFA70739FE98CBE7AB40E4
+:10E970006F0BD0B5D300FE8C27C0D60FB5DD233B7F
+:10E98000F2913E2ABD9BE9FA309AD15B17819E37FE
+:10E99000AB754E4F4F8BA4C0FB93E9FEB59704A710
+:10E9A0005B5F1E52E518BE87D3D203E20119217ABC
+:10E9B0000FF629F47CB2BAF928D265CA4AEA5E8514
+:10E9C000D01DECD6E5E8134D2FAA9B7F18BDF84467
+:10E9D000A3177BCD9D7F1901F1AF3D12DA07D292CB
+:10E9E00028ECF7E3CDCCCF386076A3FC76BEA6E06A
+:10E9F000FD73AD1DF99ACB3DEC2F42BFFB9B041379
+:10EA0000013B6737938F543C0630390AB5DFAF9A24
+:10EA1000DDC8AF68F0E3F83A1CCD7F52EB37C2781F
+:10EA2000701FD1218E17E65FF0F84F4FF34AE3E3F2
+:10EA30007ED779759F6792560361F1FF15C6907373
+:10EA4000A9DBF8B940779C2CD8CF6EBA4C3F88BF71
+:10EA500004E8BC5FDDF914C67FCF3F737C1AC8EFB2
+:10EA6000B23FEA8989F2B97DA79504D8BD0B03AC02
+:10EA7000B315BBF511CF5108A965DF39FECE8AF673
+:10EA8000A5E279A3BF98BE5FF1E247C3216ED5BE70
+:10EA900086D919DF335C3E7C6DC3E17CBD4266E7FD
+:10EAA000C25A78D7717939F7527C29D849A9917D12
+:10EAB000BF5AD1344B3186ECD3479A151C97F6C315
+:10EAC0007BCBBE1D12C6CBC3F15BCDE0ED60F6AFD4
+:10EAD000A259F1C377B0158D5B707FEB69FCD40050
+:10EAE0007EDDA4DF3DCBBEAF6DD68BF1C3467DC0CE
+:10EAF00088714EFD71E370A6B792108FAA42BDAC2B
+:10EB00006EE271324DFC68D9EFF6BCE8A3A459F669
+:10EB1000FBDFD8C0DE9C6DDD6EC3F85C238BBFC904
+:10EB20001639727CAEA7B85CD37D3C2E37F534190C
+:10EB30001E1E973B0BFFA17A38DFCCF5558D6B3647
+:10EB4000F68AE9FC7CD9B3179E84F3A473CF7FF2D5
+:10EB500024E05FF9CD674FDE0DE7127BCD7658FFDD
+:10EB60003CCFBC8DF177F5BDBBB99CB7EFF8CDD3E9
+:10EB70004F503D6C7FCF88F7B6DAF79CCE84EF1903
+:10EB8000DB777D990AF1CD957B0A703FB3F2854919
+:10EB90006997BB7F02F2E98FE1FC44CB8F03BBF5A1
+:10EBA00004BEE73C7FCC88FE47779CB5A98AC5AFF9
+:10EBB0001D3CBEBA33F279951A0FACDE7DCBCDD7B2
+:10EBC000C33AB85B713AF0398F0FF614577D8BF268
+:10EBD00075440CFCDBC9E3E74D5323C655CFC37F17
+:10EBE000289F3699C5B8EA85DD8BFFED0968DBDD26
+:10EBF0002B6A5C351003DDD4F3B032B36B9B19F490
+:10EC0000E3F9DF621C1BF8467D72D2FEEC854C886E
+:10EC1000479C513AEFC47BCA7B8C78CFA862CFBBAC
+:10EC2000A82FED2F1CC57326C2CFA3DA49F70F3BDF
+:10EC300037E07B1DCF362B8BC772FA43BCD661C33E
+:10EC4000E73C2ECBE4588DD7468BD3BE6F66F7A139
+:10EC5000D4F3B9AA6D1F188826FE2D8D057E1D17C9
+:10EC6000CE15D5796BE1D9810ED7869E3F448B872F
+:10EC700073BB1AC62F76EED0BE859F47749F3310A4
+:10EC8000D277249C8FB373738F5F7A37127FD5F35B
+:10EC900087B7B5FAE98FEDDCA167BCBF1B5D5E35B8
+:10ECA000B3FDAD4A9F735F47B6D39D5CDFE93AD3AE
+:10ECB00061C67363B6CECCE3EB4C35A51BFBEE8D82
+:10ECC000E17B8EEF03CF3DA3F7C37E795DD301B423
+:10ECD000B75A3DAF262CFEA51D4F8A63FE4175F342
+:10ECE000BEE1608FCEED7F09E5AF7AE771838FC219
+:10ECF00039D4F87B43DBD0A0BC831DF787D8F173F0
+:10ED0000CFED1BCECE4522E769B171F89E1611BE3C
+:10ED100067E7A702FC65BE2683DDD2F3386765D7B7
+:10ED20002C98EFD95685C07DF6B34DFA227F8471B9
+:10ED30003F83756C4C904EEBACEC3B3E7D9201FDFD
+:10ED4000CC95D6B1C7E0FBF195568303F6DBB5ABA6
+:10ED5000D9BDCADAFFE54C07BED426DE86E746F504
+:10ED60001A3ADA93EDB9B00FB7E7978C06B1D2DA59
+:10ED70008344974EC07BA5B528CD6181BC5ECC4F46
+:10ED800021B213BF33D4DB0A8B601E7ABBCE6E8EEA
+:10ED9000B8BE32788A85E5CD50ECE2777FDF210F6F
+:10EDA00006817C1CDF3A0F46A7260F46F98DFFAF80
+:10EDB000E5C1F0C1383F813C18018CEFA879309251
+:10EDC0007FE43C18105F1A1D9207A353930783F347
+:10EDD000F19F7930FE9907034A350FC63B1BCA0ADB
+:10EDE000204F859A07E3CC064F01E4A550F3607CE1
+:10EDF000B56115ABF33C1896FB571784E6C1C8BC48
+:10EE00007F03B6AB79309CF73F52109A0723EFFE91
+:10EE1000CD05A1793066DEBFBD20340F46D9FDCFC8
+:10EE200015087930D6FEA100F260BC1EEF6E8D4B46
+:10EE3000899E07A339CE11531E0C0AE73D84132582
+:10EE40000F86164EB43C1814CE89B831D1F36084C5
+:10EE5000E113250F0685F309C2899207230C9F2829
+:10EE60007930289CCF715E51F26068E144CB8341D8
+:10EE7000E1FC17C2899207430B275A1E0C0AC710E0
+:10EE80009F123D0F46183E51F26050380908274A3C
+:10EE90001E8C307CA2E4C1A070D2114E943C185A52
+:10EEA00038D1F26050385908274A1E0C2D9C6879D9
+:10EEB00030289CABE2C744CF8311864F943C181492
+:10EEC000CE28C4274A1E8C307CA2E4C1A070262024
+:10EED0009C287930B470A2E5C1A0700A705E51F22E
+:10EEE0006068E144CB8341E14C437CA2E4C108C3A8
+:10EEF000274A1E0C0A6716E213250F46183E51F2E8
+:10EF00006050386EC4274A1E0C2D9C687930289CAE
+:10EF1000A508274A1E0C2D9C687930289CE50827F7
+:10EF20004A1E8C307CA2E4C1A070EE463851F260DB
+:10EF300084E1F35DF360980383A481980703F37180
+:10EF400076E7C148FED679307E05F8FE330FC63F1E
+:10EF5000F360FC1879306EB5BAFF1E8FFBC6EF96D2
+:10EF600007E34CBC266F440F79306EB5969C05794B
+:10EF7000FEB679302EC47FBB3C18749C7F5C6E9CBF
+:10EF800068793074966F9707838E235BC65C663E04
+:10EF900051F2602458C4FC213F561E8C63F149385D
+:10EFA0009F6879307E72F926E8360BF669D35114E2
+:10EFB000C94F26FFC4680B8F1BFE50F92760D2395A
+:10EFC0003FA5FC136A1E832605D6C3F739DFDFE1B0
+:10EFD00072F101CF43712C6A1E0AFF548CEF2E157B
+:10EFE000F3504CE17C9CED16E5610A61E72853F291
+:10EFF000B3FCB5B05F2FD7E4A118229ED317BB8F07
+:10F00000E6537064AA539CC7512E0FD34A3F3D0864
+:10F01000ECB9796CE43C1433383FA66BE83285F3E5
+:10F020006D3A2F6F874F73A83C17971F9581AED30A
+:10F030001C6D32C6E96F52F9E710F83793C3D5E279
+:10F040003B83F36FC664C63F2DDE6F01FF28DE6F82
+:10F05000958F42FE69F1D6E2A9E53F09E57748FEC2
+:10F06000905C22E69F986412F34F14D8C5FC1337C6
+:10F07000A68BF927263BC4FC13370D11F34F4C75B3
+:10F080008AF9276E1E2BE69F98EE5AADC97F719FB5
+:10F0900026FFC5439AFC179B34F92FB668F25FEC44
+:10F0A000D0E4BFD8A5C97FF19226FFC53EA1BEB06E
+:10F0B000EE35A1FFE2FAA3427D49C37B42FFA5FEE4
+:10F0C000E342FBB2C68F85F6AAA64F85BAA7F94BD5
+:10F0D000A17F4FF907DEE2DF43BFC3BF873EC6BF54
+:10F0E000877EBF87FC17EF5896AE0BCD7FF1BEC56C
+:10F0F000B30EF2121CB738785E81C8F92DBADBA3C3
+:10F10000E4BF08BEFFEDF35FA424FFF0F9087456D6
+:10F11000F63D606F4B9ECE9AF2DDF311DC5A227EF3
+:10F12000D73DAB54FCAE5B6765DF6BCF768BDF778B
+:10F13000DF5E2E7EDF3D22CE2D011EDAFC17BD2DB7
+:10F140002E9D15EC25CF531080EF74B321DE56842D
+:10F15000E541C87F910DF1B6522C0F43FE0B5AFECC
+:10F1600019F25FD0F208E4BFA0E51B90FF221BF26A
+:10F1700067F878FE8C3A9E3FA39EE7CF68E0F933AC
+:10F18000FC3C7F4623CF9FD1C4F36734F3FC1901C5
+:10F190008473C27B18CB93DE562C4F798F6179C66E
+:10F1A000DB86E559EF192CCF793BB16CF75EC432A1
+:10F1B000D6FC19AA5C7E087EC315303E9367554E77
+:10F1C000AF7EE09175A1F933463CB009E5345ADED3
+:10F1D0008C1CF8A62F257ADE8CEEF628793382EF88
+:10F1E00047CF9B9136FAC7CB9B31D7F2C3E4CD987A
+:10F1F0005B23E67598B7EAF2793346C495DC82F270
+:10F20000C7E571AE25B6BC193EABC4BFCBA7740130
+:10F21000BF8BD205D7EB1EF20E1CB43E3D04F61395
+:10F220005D43AEBA6CBE07AD5C44A737CBEF30E7A9
+:10F2300047CE97D1135DD5FEEF57B03C0E732DDF4F
+:10F24000325F460FF9160E667F817632D67C193D05
+:10F25000AD0F3DD173C68F9C2FA327BBDA933D7DA5
+:10F26000730AA373EF1EE8AC7E2F5D696A3D842F9D
+:10F27000DB5DA8DA32FF1E3E77A61DE3331D3BF9A6
+:10F28000BD381771D853D9F7FAE06F763C9F309CA0
+:10F29000E077FC76E2A2FC89E7CFA59DFBF6C1BD35
+:10F2A00080B536E24A4C02678F38F403611F768DD1
+:10F2B00009E23555BB3F7DE38F14AEB9458FF7E5C5
+:10F2C0003A280EADE8F7B912816FF1E497B84F878D
+:10F2D00033BA4BBD42BFEBD6FC1E0EE8921A3C7F00
+:10F2E0002AD05B70DFD4B599DD67D593AB1E9F90B4
+:10F2F0008CF7C689DF81FC433F7519C7B38B106754
+:10F3000000FAEFB4E2FDD525AF2D34C0A070DE1AAF
+:10F310001A37E85524C6811ACCB6E1706F2F5DBD4F
+:10F32000BFE773B5821FBE88C34D2911E3449F2CEC
+:10F33000283A0CFEF3227719DEAB482B15E34684FE
+:10F340007F470FDB32F03365C2EF75FAD97DCFB05E
+:10F35000EFEA9BB7209E4BFD9AFB4B8D625DA5DBD0
+:10F36000392BBF9762219698E8D636F8F109A3BFEA
+:10F370003DDD8CE922DDCC0E916EF14344BA68E9A3
+:10F3800066758A74D1D22D61AC185F53E9A6DEA7E9
+:10F39000FCA1E89664E3F73C82F42A31A5A2C947B0
+:10F3A0003C33E400CAB7561FFA5802F01B7E48BF30
+:10F3B00064FF6A7CCB6995C16EA533D0445AC4DE24
+:10F3C0008B077D80FCBDC489FAA0FE3E8A78F221BD
+:10F3D00097FB8FC8255AAE987EF0F802DABA19E486
+:10F3E0006D04FB3D1A18AF4A22B89F5388D30EFB19
+:10F3F000A826AFC9B94881734DE25C940DE79976B0
+:10F400002C1FE4DF3B770C25B8EF6F0A7C9E0AF7D0
+:10F41000061E1CD9390DE20F9EC5A404D6AF5909AA
+:10F420006C7D5DC64B5B028BCF6C28D111D768F821
+:10F430007D4A7ABF44C76BB7BB5EBB01FCD1167671
+:10F440003F80D83BDFB81DDB47E1F7E119BAFA6B23
+:10F45000001FDA1FBF2BEE68F9C8B630C40EB737ED
+:10F460003F7225DC6BDDA48BFC3D73818DFFFE1D9F
+:10F470007E3F654430DF42816D0CE6657870001D8B
+:10F48000A77A7A17F25195CBEB38FD0F964D41FCD8
+:10F490005E68911C10AF2BD4DF71D3308ADFB8B710
+:10F4A000657EAF97DD5F1FCDFBD79AA9FEA2FDAAAF
+:10F4B000FF1BFC9E95974ECA980F71744D19DE1371
+:10F4C000FCA3ADF030F02BC7D5340AE429BF2511D9
+:10F4D000CF713D1F12277E9AD52ADE07CCE1F7B601
+:10F4E00073DA881F84E2DA6362FBB836B17E9D6608
+:10F4F000FF39DFC6F5D4465241EE367EAD9760FD4A
+:10F50000E8E824CE3514DF8E45BD71FC8ECF09FAB4
+:10F51000891D5FEB8B22DD8F596E63FCDB642068F5
+:10F52000BF379559F0DEF9FEB28AFEE05F7C719735
+:10F53000BB7FA43865889F96C0BEBB772590B1205D
+:10F54000876B2546EFFA8C9208EB962A77AA1CAABD
+:10F55000F2975116E78E740FF5339B8472965736E7
+:10F56000443280FCEC9530FCD5BE86E2759975DBA3
+:10F5700047D6F4017C3CCD9FE17D32538BE48A7405
+:10F580004FE7619B8DDD6F5CE35B0DF7467E419538
+:10F5900008EC5486A13E2B127C1FD9887EE95D368B
+:10F5A000077BCFC4F320C9F519709FA2BD79D2E4BF
+:10F5B0007514CF27A83EC07AB5497122DEBE2A4213
+:10F5C000F09E2C8FD7F59D46B66C08F17F37DB7225
+:10F5D0001B6D145EA38D7D6FD9CBED94006FE77F1B
+:10F5E000FDC306F03B2E1A917FBDB9BFA9BE77803F
+:10F5F000D3675C826B2BBC4FE0979F51E3E374DBD6
+:10F600009C8B46415C9ED23BC40E06F9E663F951E1
+:10F61000DC04CF3F922C3A9443E27239ECC27D76FF
+:10F620001FEA8DAA07242011C853A0DA37A9450A7A
+:10F6300058A9DC8F365902708F2EA99CCE3B19F247
+:10F640009A9818BC56F99C18D7A2F29803CE3DC1DF
+:10F65000ABF3104805F8AADD53EDE5DA44668FD622
+:10F660003E24635ED4CD729B19E2A9592E471EA495
+:10F67000884C921D78AFA65F3971520C49FCC05F6F
+:10F680002776FB0154C9AFF9463F2FD2775B176D40
+:10F69000CCDF1E97E0FE33D06BF8E1CEFDE02E38D4
+:10F6A000CDA417BBFFC5ED04F76B0AF97A37EE3F1F
+:10F6B00074EC7BD1C00D24F43B2AAD9DD86466EB7D
+:10F6C000FCB8EBD9BA37EEBC05D7BD6E3B515688B6
+:10F6D000EBD4C8965107E09EC5C80F997E126E1FE5
+:10F6E000ECF40FD029E7B04F0FF4F9B67641CB6FA9
+:10F6F000123075D787EAE01C86EA5BC8FB6735766F
+:10F7000064C5F441B5185EE672D4FF1EA7DE1D4243
+:10F7100047EDFBDD714AC9D4FDDC3110ECC8113D69
+:10F72000DC0BE9C8A5F3A3F3DFC8F525F173FF648B
+:10F7300098D7C6961BCD20DF6B0379F662FA4EA2EE
+:10F74000A9049997485C18CF19493D32C88F518B4D
+:10F750004241FD41A58424A4C03DB42221DE432CB6
+:10F76000493CFF4B00F9D22DA7548E43EFE5AAF296
+:10F77000A99547557E6BE1A005CE0721624E4BBD92
+:10F78000D484878146B2D90EEBBBEA5FD6727FAED6
+:10F79000D69CE9C7EF977C19E81FADE4FE51ADA5F3
+:10F7A000D084E6605F32AEEB2B217E42E9B0328539
+:10F7B000D979753E5AB9F45CD4137FC83EC123771A
+:10F7C000E27D44CF45033E5FA7B807C0FC55FA5C15
+:10F7D000C3E9A3A58794C0F79D9C2E3DE39B638757
+:10F7E0007BC1892617598FF8E6E13DEEA6C0481384
+:10F7F000ACBFF76AF08D01CF6B13C684E3295BA21F
+:10F80000E099CCF0BC8EB8FFD846E53767455D6D12
+:10F810003CEA15792B3D275CAFB47AA4EA8D1AE750
+:10F82000BDB6B2FE005EBBED416F3CF18C2E4EA525
+:10F8300004EF5739F7C4A31DD1EAD3E77CFE9E78C5
+:10F8400046BF058A7B06CCCFA3EBCC043919EE204A
+:10F85000BD8A2992C39BF5A8E7A435B67BF8AA7F99
+:10F86000A5FA55DA7EAA5FA5DA63F51EFCDA04F77D
+:10F870007C9003A999CA2DC5A7D6CEF64B9B6DEEF9
+:10F880004580573CC53D0EF68D430259ECFB5F5158
+:10F890002FA2E941BC46CE9B0232AE0B3EBA2E648B
+:10F8A0004BE178A8E30F4A48647CA45A0EEB7DDF55
+:10F8B0001CC206AB269837A7EF70E28675ABEF48FF
+:10F8C000769F714D02B3BFB5096CDD52CBCDB692B8
+:10F8D000BB51BF65E2338EFCEE7803AA70DF7C6D0E
+:10F8E00082EB2EA087A9C885F3E863274EF04BFB77
+:10F8F000C84D127C379A54E990D83D7312FC7E8B28
+:10F90000C2EB53ECC8057DED03FB6BE8DF1239CF8A
+:10F91000D8A309EAFD5EE67F3A49771EAF47139800
+:10F92000FF7908529FF42A56F382A9E7394E09E875
+:10F93000D46EBD0D916EBF20313F3D91D14BBB4F79
+:10F9400000C287FEFEBD7B0D44362791E0EF59D5FE
+:10F9500099D0BF8F27CE26B057BB1206F0734C67E5
+:10F960001DD47F25779A128706E55D95E30727CC9E
+:10F9700070422A52DBF55DC3614F45E57A27D0BF5F
+:10F980007D42D760CC41493A3399FCB8F442BE205D
+:10F99000950FCD8AC00733ECC343EDA4D53004FCEA
+:10F9A000D17629CE09F72CDA974A0C5FC9C4F3291E
+:10F9B000C9C23CD3E3997FDDC1EDD53B0959282766
+:10F9C000AA3DA6F3AB83523B0F8F11EF7490CE3D4F
+:10F9D000F1FEAD706EA5C93FA9CD4F3969A105EF04
+:10F9E0007F6CDC63C6FD6B57093BC7EF6A31A27DB4
+:10F9F0008EA6B7696DE688711CB5A4F47B0BE897F9
+:10FA0000A6D424823D4C9B7BD2067CD7D2A543F260
+:10FA10005D7308F645AF2B11BFBB55CBF4F49B12B9
+:10FA200017D1FEE91993B1549F3758E488F7CD4FA9
+:10FA300073BD52E5F14A3A22DF0F9D06793CEF7E15
+:10FA4000F31D1709DEDF6F8863746C886374EC72D2
+:10FA50008F4F781AE4CD9781FAB0583D07E5FB7FC8
+:10FA600035CF943ADE46AF2951A62AD0B0608A1924
+:10FA7000D68914E29A3C1B9475A342E03BA2C7BC12
+:10FA80003B12F3318E6D12EFF9DAD9BDE1CF3716A3
+:10FA9000E077DEA9648D7930A5475989CE09F183D5
+:10FAA000F30BDEB7E9A83C2DE8D39A03F2FBBAE2E8
+:10FAB00026F63118EAC2FDC99252833F40F996DC1E
+:10FAC000400D05A5CB7F03F4A15473008000000016
+:10FAD0001F8B080000000000000BB57D0B7854D58B
+:10FAE000B5F03E73CE3C92992433794E1EC009E1A5
+:10FAF0009D108724BC1F4E9E448830BC0485EA803C
+:10FB000028CF2488D6DFB6DECBC444F4A2B745E9BB
+:10FB1000AFF4D6DB7FB0A2A8200182069AA41340DE
+:10FB2000E4113408A8A8AD5129620BC908EAC5D66A
+:10FB30007BFDD75A7B9FCCCC4922D8DE4E3EBFED11
+:10FB40003E8FBDD75EEFB5F6DA872EC977134B64CB
+:10FB5000CCB7D8C0B64A8C7D87BF1B43ADD96E6089
+:10FB60002C89B196383BB54EE70CC7D284F07E8520
+:10FB700063693E63D5D6D85C16876D7F3F8B85F170
+:10FB80008A58EAD202685BACAE5A95B12546AFDD21
+:10FB90000ECF774EBA3CA48EE12FD8DF3392B12E30
+:10FBA000236B94E2B01F606C0C4350F8CFED56ED20
+:10FBB000D097F0FFE1FD448B2D20C3B8CCA35CECC3
+:10FBC000B0F047BE1B281E4D66CC285E939ADEF827
+:10FBD00046CA652C7672116370DFCA5C8FB22CB88E
+:10FBE000318CA99E18C6A2D833F6F3D98C19F07DB2
+:10FBF000584757F3BBFD7C00C71FFEE54A0C83FB4B
+:10FC00001F29C118570E63171E3C15E3B6C1F5072F
+:10FC1000E5723FF46F4740C687F0926F870BA319D8
+:10FC20007BC4EE1981EBBA63DD7F8FF1DA42F7D93D
+:10FC300003703195B1157E19E7E6F0C27FABB65976
+:10FC400019B384FA95F509117DC018E1B5D2CCD667
+:10FC5000D4DB7AD26305D203E65DB17D8B295DC525
+:10FC6000F9BD93ECD0BFA0C0AB80EF0B0D317E5F30
+:10FC700066089E25DB4799D2E1D6474D661680750A
+:10FC800030A5DDC86C84B50A09F0E61578D3C379D0
+:10FC9000B8C54AE3DDF57F65BF1996BA18E67A2044
+:10FCA0001E9E6F5A51C1727BAEE3AE3FA8652940DC
+:10FCB000BCBBFE4D623E953FFF601E3CFFC0235F14
+:10FCC00020DDF4EB5CEC337ED211B16E376300CFF4
+:10FCD0003241EF3B1F8DBCBFACE9311A6729F39A63
+:10FCE000909E776DD4DFBFE933E4BB654C095D07B7
+:10FCF0003C5C3E9265453CDC618F493C0F20038FA4
+:10FD00008DFD0EDEDF7D64609C37A7277EB5F6E2B1
+:10FD10003AE06F33637F5E67A1F6C23A46ED08BBF7
+:10FD20004AF459DD74F27EE4AFAAC65D261CA7C56D
+:10FD3000FFA78409F04861D3373232572173DF7B44
+:10FD40000EF0F92326B3EF007FBB19E79FF546CFEE
+:10FD50003D48AF1BAF96D37DFDFA1769FC7F249E0B
+:10FD6000F86711AE3B17AF2B5FF6B6AE9FE2BA80D5
+:10FD70009FD95858977CFDEBD2D6A3AD4FBB5F29D6
+:10FD800003DFF5F2BEC6EF23843E58FADCACF5691A
+:10FD9000808ADAE6CFFA77103FB1D328BF1A3F2D19
+:10FDA0001374D2F38D46C76EFE68FA775A9F463FAA
+:10FDB000E07FA7C1896DC06918D7934FF47CA1E794
+:10FDC000834E63477F945F3D1F744A6C416FEBFA2B
+:10FDD00037FB405AD752D55D6687FB7731CF7A3BE8
+:10FDE000AD67235DBFA06C3CFC3394ABE7385F7715
+:10FDF000EB3933973776DCE847BDB936464D71D8D5
+:10FE000004FD80CE9DBBCC3E7C4E9BE7FC3AB77B8D
+:10FE10009011F15E4EED9FD779DC830687EEDFFD12
+:10FE2000AB2BB12ABCDF358C95A3DC77C644C2BBB3
+:10FE3000CF2E133CFB900EC87F4AFBFF7C803AE933
+:10FE4000B9F631A847CF7FFB5FB11E78BEEB5B737D
+:10FE5000796FEB3C2DE807EAE5B413F8EC762167FF
+:10FE6000B73755125D963C33CB84FCCC1EE0F8B41A
+:10FE7000C01FEAD7B6A8D867711D8B1B24D2237A7E
+:10FE80007ADCE59AFA39EADB3BFD85F47E0FFAB0BD
+:10FE9000C789BE77213D8685E831D6A1727854F8AE
+:10FEA00003BEB943F0CD79658DC9007AE4FC338097
+:10FEB0006F007995C2DCBDE9C1FE0ECE877DAD47EE
+:10FEC000BF8EBEE05FF65CCDFA3486EB1F654AEB71
+:10FED00045EF68EBBF8BB96249EF88F5B28E1B49DD
+:10FEE0005EAB2D7C5E6D9D2B9AEE9C817C51B5198D
+:10FEF000E895D973DDA87717F7026F997CD16881EF
+:10FF0000F7BA1E905CA86FFBA283A627EE12F85AE0
+:10FF1000B96DF10C349A8B613E3913F5D1176FC668
+:10FF200024A25C415FFA1E7A35C91F9B711D8CE3C8
+:10FF30007B09E07B8374FDF45BB6B9D03D28ECB956
+:10FF400015FE9BDC83C2F5998EAE6CDBACD0F364FE
+:10FF5000B7DD26B4C7F10EA1BF845EEE5BBE60E1E3
+:10FF600000E7DA1D0EB26F6C8D83F46375D3165300
+:10FF7000B8DDD5E44B93B7B10E3BF15955E313F41B
+:10FF80001CE85FD501FD4A4BC7CF6F55C3F0394E12
+:10FF9000D051AE30A1FEEE4B7F82BEF9B2236C9DF4
+:10FFA000231CC2AE08FD7B2DFDA0C1AD1F57D3079A
+:10FFB0001ADC1ADF6BEBD1F37D5FF0E9E9C2989FA1
+:10FFC000FB0B3AFAAC427A84F5115E05F0DBD66C95
+:10FFD000F53F04F0B6491C7E5F7314C1DFE92C764F
+:10FFE0009F033FAF2A7521B527F0C554F4EB3CD3EE
+:10FFF000109F9A3FC70A1222FC247DABF93779C2C1
+:020000022000DC
+:100000009FDA1BE5CE0713093F4F02F2C3949A8E85
+:10001000391620D9AD8EEDE50A8C3FE5898E395130
+:10002000D05FE8D8C1FB5B3B4E595C8CD5B057CA5A
+:100030004BA07F3BA013C7BB565B60F62C44F95D19
+:100040000D7E9205ECD1EAD3430EA1DCAD6EAF2854
+:1000500097C0EEAC068323813DAA74C706ACB9D421
+:100060006713E0B9E7EDDE65C42F57EBC86EAD3E10
+:10007000AD70B9399248EB5700F62878AF2E1AFCCC
+:1000800055C0575DBCC5559B49D77D51F1D877AB5D
+:100090006AD8758D1EF81EC25167606E07B4AD47F1
+:1000A00087C4757C8FDD6E5DC72A14E08383EB2CDB
+:1000B000D4EAEF179AEC83D0EE151A98B7377DF98A
+:1000C000A483FB8DC0E4E948E7AA23269277FCA12C
+:1000D0001F5829F4511510280EE0A93CCD02D1B1CA
+:1000E000F85CD9E70AB60D12FB24C25F61A1BEDC41
+:1000F00037DCD7DB56E17883C3F984E3A948912A3A
+:1001000094B0794B6C51117D39C5300CD7C3E4687C
+:10011000D756C0AF9C6E58B31BD62F0F8016F0A1D8
+:10012000D85DF2626837164F9197405B6BE476B505
+:10013000D6C09687E3E905811FADFDC0E1D98A7479
+:10014000BFF456FB182BE9AB0C3BC9B9586FADE4B3
+:100150000A50DCD4CA5C5BE15A9DEC619C8FEB19C0
+:10016000F2F11B621C97D9B047057E6D747C40FC90
+:10017000EB8A33DC9B09FDC0131FF17EBAE14A26EE
+:10018000F0F781273ACA15900757B6E1CA40E81F31
+:100190007AE2637E7F220C0906EAF0139F94FB6CDF
+:1001A000382ED7676CBB3B1BE7510C12C9A972C034
+:1001B000E4AF85FFAD8BE5FC54073C82FCF786B0CD
+:1001C000B3EB6B8A5EB602FF2B456E750D8CE3C7F1
+:1001D0008069F4DFDF6A7894AD068A53B0457CBF4E
+:1001E00029D6ADD18135B8B367A15EA87767CF8E28
+:1001F00041BC7A4F225EF3DBDAA7A03E6E78FBFDAE
+:1002000031E8AF22BD709CFC3688DD603D975EEB27
+:10021000B7450E8B473F7014BEE3003996DCDC9F78
+:1002200094543B5B047257EB66AA09D695A28BEBFC
+:100230001A18D72FCFDB3D7FC4F7584680EC4DA16D
+:10024000C3FB31CEAF8F57597B7CAF7A59AFB74CD8
+:10025000B90FC8E8E7C4A737BEB704F5FBEFCDAECA
+:10026000C12AC2E5660F003C3B0D4C61F1C426C3B8
+:1002700094028C3FA35D1B50EE5DCCE90339C33083
+:100280008D80845FE298B0B855AC07DE2F61D08EC8
+:1002900045F86EA0F5C9C857A3984746FD3586F9BD
+:1002A000ADD87635BFE644BC3D19C5EE40BFCFB2F0
+:1002B0008DB9FD61FA63403CF7F726251809EE6811
+:1002C00063FD6CE4D7E82F981DFDAAAEFF342938F2
+:1002D0003E08C874BCEE3A6C6008E70B46BF3D0EA2
+:1002E000FAC1E18AFA2C0B8DD725E8AD8DFBA44924
+:1002F0001DEE407D93C0FB2F1472FB1CFCDCE47FE1
+:100300003613F16359E30F932F673CF75BBD494503
+:10031000F1F1D0D63747339C7F6C4BB401E9F0F252
+:10032000F6BC28E4879D881B587FBCD97E0F8E17AA
+:100330007F05E0CDA4EB6EC2ABA28E8A03BC4E98C3
+:1003400066533700DE5F88AA9F86FC1FDC6160CFA2
+:10035000C2143B4DAE59D8DF7959B5A3BE7D21B348
+:100360003E9AD6B3C340EBD9191D1CB116E0DE305E
+:100370004C2947F8142B53500F2B8622F51EB83EFC
+:10038000349EDB574D2F2F88E7F2F3A404F3E7E107
+:100390007385243FA5B28DE4AE2BC8FC669827690F
+:1003A0006EBB8CF4889E05AC847CAF046406FD496A
+:1003B0001E46498D4936A35F257DEBB62D06BA4F03
+:1003C00011FA76CA87AB2B78DCE33A3D11C63B685D
+:1003D00033325CD764D621A33F38F92A7305907F66
+:1003E000AEF278C60E7FE83F3DAFF3074BC578EE1F
+:1003F000A0BD042F17B2483FAE7473D9E712CDA346
+:100400002A68A78B2DBAFBE8E7C5621B193795C58B
+:100410000BFFA63FEBFF1DE937E05E98EF3E3B9FE9
+:10042000AF54CEF915AEAFABDCE4423CECB2B9DF71
+:100430009D887AB1DDC8B6B2BEE5E979883FFDE0B6
+:10044000730CBB6A65FE7CE2471BAE67C4E68DBEDB
+:100450002858F788417C7CE43BD42343FF333101A7
+:10046000F5F855A15FB456E333E4277B1CE727FB7F
+:100470000D2139BC333E939ED3E40AF90CC7D96FE2
+:10048000F42FF4F46227813FEF44FEDC65631447E8
+:100490003D966A598072A5CDF3BCE0637DBBBE6614
+:1004A0006DAB11D7FD15D80380BB24EDAA29DC9EC6
+:1004B000EF49E27C552A7F4BFE766793C4D0CF4F3D
+:1004C0006EE2FA3B9C3F527BE78F5F225EAFC51F17
+:1004D0005ABCB0FB87F2C791BF8F3F365C933FBEDB
+:1004E0008D453CDCD75C9CC2BEC7BF6914FCD0D72D
+:1004F000FDF156AEE7F4D75F1178DD67DA383D17C6
+:10050000F5C0CD0617CA39503F7D36AC635F347FE6
+:100510008F296BB2B0BF4BE17A65579399F4CA2E1D
+:100520009BD74B76DC6961E83F30C5DBF133D4877C
+:100530006916754318FF2E8DE7FC566F0C8CFF0C67
+:10054000FDE2A39CCEE36ECE934DF05CEA522EE723
+:1005500005174C5B300E2B4D28DC817C7402751620
+:10056000B4D5E7E029407CD53913E9BBD75A4E967C
+:10057000617E11FC1E37F2D9D8FD27CB8A72F07943
+:10058000AE4FF78A56EB8FC735C5B3EE78D723EC5D
+:10059000C678C6F59207F92437D4676E23C56B1A5F
+:1005A0003FD447033F805CCC67AA3116869C73CE4C
+:1005B000F330984336A73C92CEF303D3283E9C7B7E
+:1005C000BAFD55D0CC6C9E47775FF0C17C1D1F8073
+:1005D0009D3D1E8FFED2F180C980F399D664737F52
+:1005E000684D16F293264FF4033CD5FF61D8B31B38
+:1005F000C2EC7B6C0297A3C75D0ADDF77598FC839C
+:10060000E1D2BF33FE5EBDB03F9FA33C63FC70DF11
+:100610002B0BD18EE62F771F44FC4F4F92E9FA2F18
+:1006200058C09285F47129E497D51BD5E2CFA4D0A8
+:10063000734CF10CB3C1FDFD49D1F9387F6982F7E4
+:1006400022D28929C123F8DED80979F9285FB65169
+:100650007509688F34B801AEF2ADB6101C1A5C672C
+:10066000055F94262CBE88EBC7F750BF347E7CDE36
+:1006700082EF6B74AF6FFE82D33B8CFE48EF10FDB0
+:10068000A53BB0AFE1E12BA157B4FE3F4A7F2D7FE0
+:10069000704DFA637E20F6EFA2BF352129447FF02A
+:1006A000B3E2B1AFF7B3EA4DE077E7F4BC5EE82818
+:1006B000A4E75D265821FA552D1077A23C7A1DB487
+:1006C0002FB0C7CEE7EAFAC3F9FEE022B2C109F1C2
+:1006D00084F76A537008FA21A30212F985A340F047
+:1006E0001791FF95417ACF25F0C4CE4BD2F961DC4A
+:1006F00045FF2E1DFDC34002FA51A3CC1501E4F7BE
+:10070000DDD629E9E8D7E5592765215FBD3AECBE7A
+:10071000E368825E4D5BBEE73935E4FF68FAEDA021
+:1007200018569BBF2081EBA11B41DDA21F882E63C1
+:10073000381C9A3E47F2201C5260BEE13B2BE9E593
+:10074000A60EA0C78D0807E0A155620DA8CF0B0D1E
+:10075000EEC462F4D392020AF7F7BEE98FF9C18AB8
+:10076000A637DE43782B703F04E35097F162773E63
+:1007700062604F3F58F357B4B840F367B4F813FDC5
+:100780001EBC3F405CB79B0140B447018BBF06E6EF
+:100790007FF2B23ADC2DE4568175548875CC64ED55
+:1007A0000417FBF6BBEF26017D66087C541C81B85C
+:1007B0003117EF337633E0E16685C79337BB207E90
+:1007C0000CE3A399E322FBF89B921C1AE75ACFEBA8
+:1007D000EDC044DDFECC3FDA1E017BF409B8CEC784
+:1007E000D6F1B874C240D9A7A0E11C9769407EAC8D
+:1007F00016F60DC2E85EEDD24BC22F9E60E8C875BA
+:10080000017E5BF7FF8DECE081FD7F7B07FDBCF196
+:100810009F2BCC0CEF4FF8BC200EF5041BA7125FEA
+:1008200069E356FFA9C1CAF875E2FF2AB1F6C30011
+:100830008F7B28C267A1F677179FDC84E37D794E12
+:10084000E1BC2DE62F337907611EBBCCC4F30187D1
+:1008500025EEFF68F70F1B016EB8BE2941CB0BB424
+:1008600093DDC79F398CCE37633E202F44D79B2F13
+:10087000947FAEE4F6A40FFEFE37F2015A1E60AB81
+:10088000C01F3B78D6A4025C531BEE51D0BF9EEA3A
+:1008900094993B6CDE9B542B7387E5039E49D0F9FA
+:1008A00023075FDC3403EC49759BEC8A42796DDAEF
+:1008B000753C17FBEDB2CBDA0B1FE9F13BB5E91E36
+:1008C00005F9DF98A8927C5F6BFE0923804F6E408C
+:1008D000BA33F2EB3AC74824477AFA1ED8FFEB84C2
+:1008E0008E9CBEF1DD17FDF574F8DDC522DAEFB997
+:1008F000163DF47CDB02EBF4C1FA02B04E1FF85D4A
+:1009000007D6D9A97F689D93FA1ABF5637FF3601DB
+:10091000FD368D4F4B1338DF8CDFB72981D942F478
+:10092000D2F0F5A1B0577BA3347FC3356F065C3A94
+:1009300005768718D4C7DA9D6342F66BFEE932F27A
+:100940003734FB355F5E544A6A53D82F4C23A35E7D
+:10095000D3DBA9B9EA6223EBCD3E2D88EC97B76DC6
+:100960005462A867203A4992C087F0B33538CE3038
+:100970000FC1A9A7A706971E1E6D7D9A7F3D5FD068
+:100980006FCEA04C23C2DFC3AE8A75E2409887B811
+:100990005EBBFAB58E9FAF5C28792BB717BEED8B87
+:1009A0007FF5F7357D508613E451EB43BFC298982D
+:1009B0004C742BBB6A626EB01B2C238A7D1A66575F
+:1009C00058C550E29F7B851DEE8B7FAAAECACC9B9B
+:1009D0001FE22363E31356E4A37DCA462BE62727D1
+:1009E000DB66D5C6019E4AFE543417FDBCEA0E03F1
+:1009F000C3145669D3170731AEAF7E8FB9502F1687
+:100A000035B51623DF1D52DA658AB3BF64EC893031
+:100A10007FB1B1A9D68AFE5463A24C71FC6107E78D
+:100A20004BEDFE9644AE3F1ACF5D9EE1EEE5FE191A
+:100A300071BFE4E33CE2A3B24741AE310E4D8AA15F
+:100A4000BC4489649F53817EC84D46F2F3218EF9E0
+:100A500023EE035E6A34EFC2D47E69E323F7D881C4
+:100A600010F5FFFD698D19F30BB324D7B3F05C9932
+:100A70001A6CC57ED9DC4CAA7B18FB3F32F9B3C196
+:100A80005B25CA8B9401BB60BF6C51A61FF313FB9F
+:100A900025DEF735F37D0266F725CC8079DEAE489A
+:100AA00018B581784AEB0FCEDBC0042387C557F712
+:100AB000ED9549CFDC572AF971BFA9D49ECE7C6150
+:100AC0007C55F6A889D635BB29A508F9784EB9CC4E
+:100AD000FC61FC1D107EE13C0FC4E161EF1D8EE264
+:100AE00070051703DC52486EA7093E9FC5B89F38B2
+:100AF0007F4142C47BF0C62D688F6E6D8238157AB7
+:100B0000D344FC7AAB373D625E0FE37ECD09162CF1
+:100B10008983F1FB250D24FE9B11B48F0EA8A877C5
+:100B2000CE24A25E63C3B89C6872572AAFAE237E00
+:100B300070F27DB2791248938CFA2F529E668E8B9A
+:100B4000ECCF72F7A83788907FBD5ED7E47E5EB3A6
+:100B50004CFB72F30A2517EB453FE8FDECB1D17D64
+:100B6000E8856FD587E37AD30B1F96FF5D7AE13571
+:100B7000082BC681FCFE3451E8877EAC1FEA875201
+:100B800079FB26E4972EB077E65EF845B3175A3C1A
+:100B90005E06F24AF27E91EF67945E4D65BEFC50B0
+:100BA0003CDEAD2FC09F70F5E2E73C9D984572D4C6
+:100BB000AD5F34FD11E64F18C7FCE3FE4429F89100
+:100BC000A63C842F83E02B633C1F5886854398976F
+:100BD000737E41F9966A88F329DE67BF25B850CF46
+:100BE00049F12139D0FB195A5ED72AF2087ABEE8BA
+:100BF000CEF3CD35521D8CC61765762E1F657365F5
+:100C0000CABBEBF9449B4FCF1F015D5EE69AFC2106
+:100C1000E4EC87F24773A2D8571DC4065D0F5F68E6
+:100C2000FCA0F187DE8E1CD3E567FAB2236FA21D0C
+:100C300019DDB71D797D9891F4B5DE7E68F6E2770F
+:100C4000495C2F6724F27D8E69C3E7D9D0EFB026C7
+:100C5000F13A0DCD0E75E79736737E78BD63892224
+:100C6000A13D41BD9019867F916FD5F8AFEA5189BA
+:100C7000F28D15422F7536F3FC5B7589ECB7C0FF1A
+:100C800016373DB189F78D949F2B545A150B8C3B29
+:100C9000D325B930AFE316F9BA196E89E7EB5C9149
+:100CA000FBF42D3AFACE117C349305EBD01FD7EB31
+:100CB000A53957B95FA0D74F73C4BEFB1CDDBEFB7F
+:100CC000554DDE07B001FF4C7FC09CF4FDFE80F661
+:100CD000BE46478D7E2AEEC5A11C1DFCC6A4C6706B
+:100CE000FF19E937F5AA42E3D893045F0A7FE6CB00
+:100CF0008B79BFA0984F3C5FDDF485C93BB26FF89C
+:100D0000AFE5B7C6A29F3E3AE4B76BF34E53184B1C
+:100D100047C74C674F6689EB3FD47E0CD7AD43A3E2
+:100D200083A6477BE059E8D9BEE8742D3DABE9B313
+:100D30007FB69ED5C6D7EC8036AF5EFFF615B76995
+:100D4000FA74FD1603E54B268BF878B2C8C3CE4F74
+:100D5000E2F1C1AD493CEEECFACA62407BB9B38521
+:100D6000FB272EB3FD38FA05A17C1FA7E7C331CCC2
+:100D700087FBEC4C69B7D0BE67119012F73DD3F8F2
+:100D8000BEE77625E0213DED52580DC8C9397C0FEC
+:100D9000E679F8806F21EAE9873F1962A0FD77259F
+:100DA000D08EFEC9D83C85F68F1C6695F2C19DCDCC
+:100DB000663BBED7B5EFFFB41A719CAF980B43B832
+:100DC00043CDE6EEFD1BD407A5729B8CF9FBAE204C
+:100DD000C8083C3F6941A018E3A0C9ACBD16E57B3B
+:100DE00002D2B117FAFD2A498BB37BCFEF173773C5
+:100DF0003FAE3846263F6E8AAFBD18F7ADA62892A3
+:100E0000AB169FD5E5F75FD1C51FA1FCBEAAF0FACE
+:100E1000435DFEBE91EB99EBCDEB4F40DD067CBC14
+:100E20005EE373A16F581FF9FD9D26BEEF133C6969
+:100E300064E807B30B89BDE663AE95E7DFD712ED33
+:100E40005663719F8EFBEBFB5AD2DC6A6EDFCFE7F5
+:100E500076048BD03CEEDC3E5BA1FA35911FEDB100
+:100E60007FD2C7FE88BBD17E08D5695FFB21C55FF5
+:100E7000AA94F6B95EBC69750B4CD43FDDC8B49F2B
+:100E80009BE474E7F96837F2F9CEF3696E84EB7985
+:100E9000C1A71ADFEF3B77399AF6414D6E15F78FF0
+:100EA000830E8BEB59E25BCEEFF5A943FCB84FFB09
+:100EB0001B21173BA383C7B213C3F73DF83E47CBB3
+:100EC000BA47679F33D27EB984F9486D7FD90772DC
+:100ED00043753DF18CE20F23AB67386FAD9BFD1A74
+:100EE000DB2993D438C4FBE5446D1F538DA33CC468
+:100EF000B757A8CE508FFFDDEB9807EB511AD659A4
+:100F00003C0AC8FFABEBECD46F5CE7A476FF3A95E4
+:100F1000DA878EC73E8076BFDA6DF22861FAE39DEC
+:100F200064EE77E5657F524CC5DF7F6354873EE50D
+:100F3000C10E19F5C58D57611D117527CA65C437D6
+:100F4000E537B342FD4C69710CF66FBC0AFDB0E7A2
+:100F5000AF2439B83DAA53EA462793B4105FFC2D5D
+:100F6000C9DD9104D7EF71783EC176B734FFE02533
+:100F700046FD73BC7FAB7C099ECB0F14525E391FBC
+:100F8000F3CA7934EC42C4DFE85613ED976BF9DD10
+:100F90003C4DFEBE8ECC33E78BBCEEABAC83F2CDCA
+:100FA000051608B40C0817A79F5B9AE794301F98A2
+:100FB000647261BDC3E82C4F3EE6635B9318C5477E
+:100FC000ADADC9196A0E720FCFFBBAB5BC2FFBFECF
+:100FD000BCEF918F627DA4B7AE9A687FFAC8A9581A
+:100FE0005780F60B2DE4FF69F5C82DD1BCCE806586
+:100FF0002CA03CD38DA29ED162F69A93495F050E38
+:101000009E80F77E7F99F17DC7F60F695FBBD83070
+:101010003C05EB7E0F4A43E3B07DEAA3D81C6A4F40
+:10102000C55E44FCB418AC2ACE7B669D5A82756DB1
+:1010300027D6B112AC637B6B9D85DA93EBECD49E23
+:101040005AE7A4F675B88EFC731C9E477E71BF6587
+:10105000A37D92296FD9146CF316C650BBFBB6184A
+:1010600013C2DB12CBB66BF360BD5A203AD080C9F5
+:10107000FED6A7BC8F59FA81DD337B474AA3186B94
+:101080007BCA3B5D990CE34EEDFF93AFE0FE9BC93D
+:10109000CB1EB3005C734FD91ADAA0FF76F2F2C709
+:1010A0006CA86F8F4783D2C3F5AE38EE1E0474432D
+:1010B000A590C605978D837E82D65F31BD6412638D
+:1010C000B71477643360ADECE495D32D80C75BAC87
+:1010D000DE1F63DFE44B9A5ED20FFBCC87F56041E5
+:1010E000C948713FCB9012B1FE65A6C3FB4672584A
+:1010F000FD9E5BFA13ED338D714BCC41871F8CB491
+:10110000EFC5EC1F2784CBDB4C47E91B488F89C90F
+:10111000BC0E78F424C91D5E5FA17F6EF439B5045E
+:10112000E934E642591DB633CB1DD4F72C185B8742
+:10113000F25C62EBEBFD627ABF3C99D78D142952C9
+:10114000445D89FEB97C6026F48F8347A3294F3024
+:10115000FAB4B716EB4F4B9D9979B2A6FAA8EFD81F
+:1011600082FB6DA32BCE9424A0FCD824179A89313E
+:10117000ACA32E01EE17DAB1A00AD7F54431D6FFA1
+:101180008C562517A2ADD0DDDA80EF17BA625C85E8
+:10119000E88F9F564BD0F49C52469D2880E7A60EC0
+:1011A000925D1618E854E0A68997A05F382C8EF25D
+:1011B000BC85CA9A2B27A81FE3AA51711D5B7E5DCF
+:1011C00045E398C9AEEF9E51FC2FC83F459E38CAF3
+:1011D00009023E4AC2EBCA60DD0477A15DF64749C9
+:1011E000C8DFFF5A6287FEEEFE1296CBC37CC3FFB8
+:1011F00042F78F44AB5100E86E93BD04C7DB6D929C
+:10120000EC0F51DF538CCFFB861855CC1F9525462C
+:10121000458C3FB5441A7F0EE1CF891B85D7CA3371
+:101220001C11F7DB6EB3929DA8782B87FCA2B6DB6E
+:10123000D2C95E54BC35A908DB3603F7D32BDEAA2E
+:1012400028A7FB061E07572CFC915BF429EEAD582E
+:101250005849FD5629E52738DF959CB83CCCAF4D61
+:101260001B945AA244F8810349FEF3447EAFD03068
+:101270007CD32480FFDEA37C9FA2222733E2F919CE
+:1012800005524978FDA8675254447F7689A324BC4F
+:101290000E756E456A44FF96B99911FD92A30564D7
+:1012A000BF410F5494801E380AED5260C1025107AD
+:1012B000A5E59F0A054B15B68BBCACC2E3EB61F00C
+:1012C000877AB0C41669A77747733B5FCED6D0063E
+:1012D00049F911BEBF5D9668FC24DC4E94CB1536EF
+:1012E0005E97158987BCA346B2977931921FE3FABE
+:1012F00092A34BEBD0F4966744BEAFF961E5023E92
+:101300006D5EE673B7A33FA2C1ADCDAFC15F2E2F17
+:101310002AA17CF735D6A18797C17A503FE8E168CA
+:101320004A16FE1AF81FE4AF897324F04BECCD7E09
+:101330006BFE7A05E82B47B8BEB2498958B7D797F4
+:10134000BED2C6EDCB2FD3C69DE9F0D0FBEE1D9FDC
+:101350009E9A2087F5333F4E880FEFBFF8E9A688A5
+:10136000FB491FCF7184F7B77E3A07EF4F51D45A2C
+:101370001BF0E53126B97CC8076DAA1203F4283E9C
+:10138000EDAEC3B6F4432F96ABB2A9E77C75D84E49
+:10139000BCE86F33C3BA6E1A26AB18BF6B7E881ECB
+:1013A000DEBF26F3BCC3B1ABAA15F75977FB542BAC
+:1013B000FAF3BB1F54ADE887EC76F37319EE2C03F8
+:1013C0009D8F7167F37AC5BF24F3BA834EF1BED601
+:1013D000FA8DDE4E841BEBCCD137A8FA264875E592
+:1013E000C7D0BFCAE9E95F1D53FC369CEFD8837EA6
+:1013F0005BF87EE2F5FA577F041E43380A99E40948
+:10140000D723C596284FB8DC96DA1D11FD93C20F7D
+:1014100099EA4C8D78EF263533E239F01B87A15FCE
+:10142000526B62546FEB33F07A5B3D1E57A4F0F8B9
+:10143000CE65B3A33B83FB66726FE7915CC5865EA6
+:10144000CFB7A5A4707FF03F5218C1352B85C3A735
+:10145000AFAFD5F76BF17C0FE293B99CC8E72EAB29
+:10146000E10AB8BCACE0E927A6535D6DBEE1DE2C15
+:10147000E8573CBD753AAFAB35ECC13ADB194F3F8D
+:10148000CFEFDF60C837823FB0CDF7C274AC2BAF6F
+:101490008AE2F5095551A23EB46E7444DCA3183EAD
+:1014A0007E6A21C69FFB8D0CF3FC8F99C00EE685EA
+:1014B000F6D9AD661EAF5A4DBC0E7C7DE6A9F5A8E7
+:1014C0003F3E8BF2E6A5509EB148453C5EB45BA81A
+:1014D0003EF4BE7DA529C807B35278DE2B7BCF44EE
+:1014E000279D2FFBE7C151FC7D7060FD308E73712D
+:1014F0007736F9E5D903189D27D1E801E1335D8FEF
+:1015000082F081CE6330B713F36FB50E138D332B9A
+:1015100085F3E3F5B63DEA89E30C6B7641BB2085A4
+:10152000C7CDB7E2BC046FB0FF2CDCD0B307FBCF54
+:101530001EC9FB486F59CE0BA27F1BFC510CEDC39B
+:10154000BC1FCDF1C63282B46FF3EEA26CD706BADF
+:10155000CEF1B8C03FB0B643C5FA0F7F3FACB71865
+:10156000E8F42E457CDC66F60F26BEB2AD89C17963
+:10157000AEB7DEB8EFF921E0047B327F3CA79736A7
+:101580003FE0D882747C579C3BD1E001387E8C7060
+:10159000687075C3A3AB3FEF147E7B278E971BCA81
+:1015A0005357FFC940798A6A09F424F4F77CC85C70
+:1015B0003E95E8437950DCD2C2F9C69F58526C83FD
+:1015C000B6A071158F8FDB9588BC9866CF268AE709
+:1015D000C7BEA744D8A38922FE1DAFCB4F4E6C9C3B
+:1015E0004EE7F826EAE2E25FA488BC651A4B0BCF0F
+:1015F00023AC15F1C6E5B68171E89F2A10E7CA80D1
+:101600006F932AB371F121BDD0B08E459C53D4F8AD
+:1016100070E469FB9D38DFC8D3EC0EF207B471BBF0
+:10162000F3131C2F97DFE37819D531ECE949D03754
+:101630001E3132BF1A5AE7040E2A833087E2A4CB48
+:10164000176C645FC61C9D43F5DE66A781A961EB3C
+:101650008F52A3991AA62FADC3E223FAB2A04F5D11
+:1016600054A41F902FE68971A5458CB73FBEEC08A6
+:10167000FA05F9B6E5E417C48D1B18311E6B532229
+:10168000FC833CE67163DCE802FAE27ED998D34A37
+:10169000841F302EB091CEA18EFB30F2FA8473916C
+:1016A000FD037DD1A52FFCB1DCA7D12FFCA1F873E0
+:1016B000B823F197501E89BF244F24FE521644E2EE
+:1016C00027D51B898FF4E52322EEF75B9317D11FF3
+:1016D000F0C08488E733C18085F7B31E9D16F1FC06
+:1016E000E08DB323FA4337DF16F1FC70FF9288FBDD
+:1016F000D9DB56FE207A8FAC5F1BF1BC9EDE3734FF
+:10170000FE34627C8DDE3EF8FBDFA437730AFF50A7
+:10171000D03B51D859879BD7AD75196D8FE2797C35
+:101720003C3682FACE81E7E963D1FEAB5497E79B62
+:10173000C6685FFB97B24742BD940EA8356451BDA1
+:101740003CD5F5FDDC6088D867B73BB93F6477725C
+:101750003DFE6B133F2F950EFE26D929030BC5D9ED
+:1017600016AC77648299AC8F639C5DE7E818A63A63
+:10177000306F07FDC921BDAAE9D1DBCC6A6D07E84E
+:10178000975132D793A03FFB39619EF7A5078DDCB7
+:10179000FFF019D1FF48B7305F6C1ED919CA433B1F
+:1017A00058A284E700E2427A5CFD0E8875706536C7
+:1017B0009DC37A134140BF5975D17ED3AD9A9E5ACD
+:1017C0003E9CF4D4655BA4FF767969165D3F7BBBD4
+:1017D00099EA07CE8A3A470D0FFAF3D6DA396CED5B
+:1017E000FEF22D9B62D0EF3C2BCEFF6AD7270BFC7D
+:1017F0004D76CAC2FE59D6603E6C1118F138C07BD6
+:10180000E5918ED8DB18F99B9370DD555BAEDCFE5D
+:101810002AF4AB0DC1646E377CF4DEFC77F9B9EEC7
+:10182000F97F8BFCAE408593C7F91562FC5BA0B1D4
+:10183000039E6E013A38B07D635219F2275CA7F31C
+:1018400071338F3023CAF32C6F26D54D9C62AE3393
+:101850007B01C4F94E95E09CCB3C46CC5BBD737BD1
+:10186000650C3ED73D9E360E300CFA25EF3A7CC60D
+:1018700064CC1B4CE67513309F05AF7B16A53F8CDF
+:1018800076499BEF1DE6BD7406E83B9BB9685C6D2D
+:101890007C86E9F9303DB57BF9AA8F1260BEB54769
+:1018A0000D948F58DB6CA678AD6BE57FED780AEE72
+:1018B000DF91DED10FEDF6FB2BFF3604F9E1D6CD3B
+:1018C000325381DEAADD7BA7336C5FE5ECD22B318E
+:1018D000781FECEED6A7D058BE6CA63AE2F757BEFA
+:1018E0003C24DC8FAD74162EC7F7D8B8EB3BEF580D
+:1018F000FCD2F014AAF712FCB442F0D3DA178792A4
+:10190000BFB536A69B9F787F2BAF1BD1D67146F013
+:10191000E3CA97BE89F8CEC46EE023D5CCF7C5D410
+:10192000A160EFDB2EE7D2771F8CDE7F75C2BC2D66
+:10193000573F89C5FE9E37FF4AF0B3B9D7072FCA74
+:10194000A26F4C687F5A3BEFB9A029211FE90E72A4
+:10195000B601C7BFED772F5EFA00F1D3FCF2D69F38
+:10196000E133D779FE7397967714F6C625F001F622
+:1019700086E28B2E16CDCF9308FF46C11DF92CFAB7
+:101980009E874A7CED66C7711FA7B6D5407526B104
+:10199000B8091496AF8B950D9A51725B9CA0AF85D8
+:1019A0009EF97FCEDB2AEAA83E20D21F2A38B43225
+:1019B000C20FF2C05FAF7ED033DE5ACC2FE9FDA15B
+:1019C000F101C36253DCF7F84587A6F5EA174140F9
+:1019D000ED96C688AD21F835E8F4F37E2157F53849
+:1019E00016E6FF03D1FCFC33980EF47B7F9ACAF510
+:1019F000B72D83F1F36952E7300BE8CB16E7A2C7A6
+:101A00001F856B96417CDDD8AFA53335F9C47FDDEA
+:101A10007ED7A111A4B7D8B7301BE243E43DF474DC
+:101A20002BC0F3ECF9617227DE0F1CFE6B2CE67DF8
+:101A300077C4AB6F213D824765DAFF89523A4C8EFD
+:101A40005EE2BB57510F029FCAA9DC1E581A797E6D
+:101A5000D1A2BA19C60F5176FBA8F0737F8D4E1E26
+:101A60004F561E7EBFBF09E871C9D0169B03E3AF76
+:101A7000DEBB3B16DDFF0C93F703E4C35567DF1EA7
+:101A800063A7FCCD96FE180FD607F87730462ACC10
+:101A9000A7E4F584A37A332C2601CFE927503BB283
+:101AA000297F19F2597580AF13C7C642BEE18D1266
+:101AB000F53B1B6BE371BCEADF37A7A13CBD9CC4BF
+:101AC000E3CD97AE66F3F715A6E0F341A74310D335
+:101AD0006FC0F8E46511D7745E95E9396DFE918D9C
+:101AE00085B21DF82127B0F100C5514D6615E91AE0
+:101AF000F51CE378688A22B9AF6E99CAD0EE7739BF
+:101B0000984B82FB3BA2837FA4F36ECD6615F3ADA9
+:101B100051F68D2C1EC6DF21F659870347E179293E
+:101B2000EDBA365F54D3D31873203F50DE374AD90D
+:101B3000C826DBC2F11C437876A4723EDA111D3050
+:101B4000609E253898B16709AE109C8CE6D5E01CE4
+:101B5000EEC7F3843B4CC1F3786E06E0B223FD87F9
+:101B6000330E276B1AAA629E20CAEEA67544D95579
+:101B7000974FEA0957752EF3A35DFFF943AC5B6EEF
+:101B8000518EABA3437D0BC8C08E814CC8F9CF1FCB
+:101B90002FC908EF836219177A7FC8AF363E5E37C8
+:101BA00089E2099F8CF12FB431F1B84E95D6A76028
+:101BB0008A298FE301F7DBAD167EBFFB79E06F1B4F
+:101BC000F66DFC39579CDD3A4D2239E1F5B8421FDC
+:101BD000DC2705CEDF08A4FD2A702057055856BF24
+:101BE000B19FF87495A1E9A99170FFEE28AF2B156C
+:101BF000E67BED43039D6BFDF38B51FE0AC0C7B03E
+:101C00007D5B92DDBDC8877EFC47DE7BE8C974A49E
+:101C1000FF3E49C53C6C973148DF37A96AFACC448E
+:101C2000F50D8D1F53DDD39BA9DE4938CFB8C61AF9
+:101C3000DA8F1ECF36D27E74B6380F5EEFE4FAE349
+:101C4000F2E921CFD684E17F492A972F16F40E407E
+:101C5000B96912F2D9827E0AB47B85BFB4B7F5D6D2
+:101C60002C352C7F58C30EA423BE1F6287A8D5AE87
+:101C700077F9F9B9CAEC772C77B8C3F86F9190F778
+:101C800045A9224F96EA9D8DF0AE6AFDC414ABE2E1
+:101C90003999FAFE6857EAC19FB2F782976EB9D5B3
+:101CA000C951B51234E1F3D517F8F957A0731D9E49
+:101CB0003778F99DC6118BE1FA5EC035D695FACE1C
+:101CC0009AA9BE72AFD1938ECFD79CF93A17F55629
+:101CD000090201F07CDDBC6A00E20DF8BE281AE5BD
+:101CE0006B17233DA6C9670ECA27BC9F837C5F8004
+:101CF000FDE1A4877798DAF9F9D3BDFCFC29F03D22
+:101D0000C901F0BD1DFD861C3BC801BD3F94E47BAD
+:101D100047BB81CEC9FA408F0FA67ED11CECEF687D
+:101D20002FB1937C635E3F0FE5347080C6A987D8DE
+:101D3000044927314FB83FD9E88C25BA69FAF1B088
+:101D400093093BA1C6E17903AB2C47C845983DE414
+:101D50007D612F4FFC2AF0F82FD176B8855D10FEFB
+:101D600014F3E6939EBF57D8AAB5AF4F98B91DD6C6
+:101D7000B9F684DC5D3F8EFE6B40F0C901E1CFA275
+:101D80009D5013783D0E5E1FBD99D7D58E71AF293A
+:101D9000C6B3CFE3CA371EC47682A7BE18CF3E4F64
+:101DA0005AD07E909F81E6E7D91B0EDC948DFBDE36
+:101DB0005D67CD0CF75D1AFE1AFCE34B8087FB5B79
+:101DC00000FFBDD825580EF11F58EC74E6EC79BF22
+:101DD0004BD2F4C7A90AE4C7CE0639D40740AA807B
+:101DE000C1B1FFDBD4938FFBA09F95E67E3E15FD2E
+:101DF000ED742FB55D27FF9A8CB660EF69EE47351D
+:101E000098DCD9C83F0D0323BF1FA0B54FA61A8980
+:101E10000E057D7CBFEB482ACF6F0EF1B1C7908FC6
+:101E2000AA1A64BB1FE87EA941769BC01F3AEFF651
+:101E300026E3D99C0BCC77CB44B4F3228ED4BEF7E7
+:101E40007217FA2960A7EEFE65EFFB0FAB99F65B00
+:101E50006340BE5AD624B1FF001C2C7F26F2F9D570
+:101E6000DAF76A1AB71CC6EF88AD7C4E771FFD15EE
+:101E7000FA0E46A41F732455F827592C0BFD13E0C6
+:101E800023D20F46851D3103DFAE48F7EE437BFCBE
+:101E9000B2F8BE02E85192C77D4E615744FD4170D1
+:101EA00007AF2B1EBECD2F1BE0FD098A5F467BC509
+:101EB000A0C57D87716E6F197D87C9E73E8DFB3E9A
+:101EC000CB853E5CAEF9697EBE3F026637C24FAB42
+:101ED00016AB1FCFFCB5B1B8FE6D12C5CBABB64586
+:101EE000EEA7548BF5AFDE7CF2309ABCCA7ADD7D6A
+:101EF000B1FE6ADDFAB57DF3CF5323EBBFAE773F7A
+:101F0000E42F46EE37BC2DC6D1EE9BD2B87EAC8214
+:101F10006520DD56FB65BF9FFB7936FC5ED09D6278
+:101F20005D770AFAD33AE1B9CA6D923F803CFE78F8
+:101F3000649DE95DF58BCB90AE7A3E5929D6BD7C88
+:101F4000BB91FC55FCFE0FCA9D9E3F568AF5AFD44F
+:101F5000ADBFCA2BE9E0E37E744FF8EA6F413A5710
+:101F60006E37B2DEE0D3E8B552E3EB3EE0D5E0D425
+:101F7000E0FEA1F0F64F13F9AD116C04D1A93CE1DC
+:101F8000BAE8A4F773771D1E41DF5BBB7C6420C5F4
+:101F9000FB1A1FE8DF2F137EF2D4CDDC6FBCD458C0
+:101FA0006C1D89F14C9BC125A9149FC58E04BCE40E
+:101FB00037CBAC02FA5D4D599BF0FB8379270AE6DB
+:101FC00060FC9F7FC240E7EFF61C29A07DE7FCA3E1
+:101FD0008312B228CFEDA2EFE3C038645FBBDAF220
+:101FE00036E1F984AEB692021C5782E7D00FC813CF
+:101FF00076A2A62DCF1A7EFE7C4C1A8FEFD73B3FE0
+:10200000FD39FAE9537719E99CC55463F04DACDB0F
+:10201000DA7344A17DF2D527963C1485F47D51A254
+:102020007DF2C3ED6B1317229F3519EDB8EFDDD5A7
+:10203000F4E30378DFB75DA2EF5E54379766EF8075
+:102040007EDE967C57F8F9B33C874AF0B1542BC535
+:10205000CF53FB19C96E5E4CB3FE16FD9F95EE2D56
+:1020600024DF17F7EF3151DDDE0E89A1293BEC3C6F
+:10207000F80AE2E3E2AB274DE88417379C34757C1D
+:102080008F3F70C92FB300C5CD1B4D18C7546ED1FB
+:10209000FA1D26A49347F84755CF7D4CFD95E8CF10
+:1020A000C37C2B9F91A97EF760F36B26E4E7AAED32
+:1020B000124BC90CBBBF598AF85EC312C6F96089BE
+:1020C000D03FAB987F7D1A3CB76A23AF5B608F46E9
+:1020D000D6016BFCBD42F0F7AAEDB3E8FB533DBE61
+:1020E0005B8871E30DF81CE7EF659B23EFAF107C75
+:1020F000BD42C7D73F4913FA67381B8E7CFD75A1D7
+:102100001A9703D7BF3EB972406FE7ECDB84BDD6A8
+:10211000ECE5E58081EC8DFEB9CEC62B046775DB5E
+:102120006513FAA7654D5F10FE2B9A5AA97EE466E7
+:10213000E65D8DF8BAB9C96A47B9AEE8E07A685A7F
+:1021400093D9EF97F07E3DD53977B5F0BA49DF7E68
+:1021500089FC1C4D8F69DF775C26F0B80C14787A07
+:102160001EFABB3C6EAE1271F28A615B0EE33E7BDF
+:1021700095B8BFFAE8C158F40FA7B12F6E47FAC05F
+:102180007C0CE763CF44E27DBAD08BD3B773BDA894
+:10219000B76B5DA9D933298F09712AC2B57A7B241F
+:1021A000BEAB74F1F963693C3FF6820EDF15416600
+:1021B000CD413854D9E5A7A7DB159CF7482ED85B4D
+:1021C000B4936AD6F77E87F14DE1676BFD99E21C07
+:1021D00078BD7DA32D3C6E8E4AE7FEC2CAF1B20FD8
+:1021E000E9D51D6F0C3A98AB1A42F106C419CD69B6
+:1021F000493CEEC082923732649698188A371E7135
+:102200006EAAC8837EF5762EF79DE3603C3C7FADD9
+:1022100030F247ABB79BE99C6235D09FE28A267EBD
+:102220009EC2D3249522DDC15F3F9A86FBB19852AE
+:102230008575CF6AE47C3FABE40BE297A383F87A21
+:102240002F2B6A4A6FFEBBE6B7E3F93035CC7FAF80
+:102250000239C5E7AB9A783D52C3816FFA67A29EF7
+:102260006BFEAFFE8BA1FD5AD845CD2F0C825F3897
+:1022700090FB45F4BDC9BB857C2DB3F37DBABB850E
+:10228000FD61521DF17995B1FE503CFA593B78BD84
+:1022900000DB871F8503FDF8F64B75F1B0EECE9796
+:1022A00024AA87C3F7F17B949D4BEA3F41BFFBEB28
+:1022B0001D16F237EF06BF654A5E4FB9D4E45BFBEB
+:1022C0006E560D7B88FCCF87581DB595829F3B1BB2
+:1022D0006BE9FBA09ABF42EF0FECE98F540ABEAF47
+:1022E000D4F15F547A24DFD5BC1D4D7E63D751D91C
+:1022F0008EFB3180AFDFA485E345F8210D07A2886E
+:10230000AE5D276D6447FE2CF8EDA2C83FD78C93D5
+:10231000090F86F1BCCD6E796D20D211F18EF5F7E3
+:102320002FB7BC36829FFBF613FE576D9323BE0F6B
+:102330005B591FF9FDD79AB76FA3EF0855EFEF86EA
+:102340006B88293104575F7220493C8E3448917163
+:1023500064F53ED9135E7706EBB903F551BA9007E1
+:10236000A6049331FF35009D0680AFA689D3D5D052
+:10237000CC5B98FF169E2731D2FC3DEE17F956E351
+:10238000FDAF33AD7CFFFAAAAF02FBF70F94A9AE05
+:10239000F3FEB7570E0DD7A30CE104BA561B83C941
+:1023A000146F9E34107CD5272F270FB2A15EDA520E
+:1023B00082DF0F9D2EF4DFE181D6E5C8CF3E9C374A
+:1023C0002534CECB69BC7E8FE17A9DE86DFC928F7F
+:1023D0002BD6FB109B2DE26ACE4F39697CBD108F46
+:1023E0008C4BEF251EB95EBF13ECC3A98512D63303
+:1023F000293E8C87F7BCC7F5424DF3B28F90DFAB17
+:10240000DF37539DD7FD2DCB8652BDAFD77B03FA67
+:102410001B5FB7ACB881F283D24304970FE173A27C
+:102420005F732619EB522B9BCF2493DDDD3B7A9310
+:102430002F06FD97BCE9781DFC09E23FF06B88FF91
+:10244000F6B415687E8C15C7AD3CAA78103F954749
+:102450000B8E57A07F71A2A800D5B974A280FC98FA
+:102460007CF4636C21BFA65B4FA6733FA6AB358A95
+:10247000F20B121BC8F9870D8AE09FD50DAF93BDF3
+:102480005FDD2847D42F6AEFDD99AED038CB34FE1C
+:10249000A997DCC41FBB78BBBA710FAD6F95B19E15
+:1024A000E85DB3DDC8EFEFE0ADF67D581F8BF72197
+:1024B0003E8EE325A0C334933F03F3D3C732B99FC5
+:1024C000AFA7C7E7E93CFF71ECAC7700F2CBB142B4
+:1024D000EF507B2F76C2C78A785C2B097C37F0736C
+:1024E00053FAE73E4B97C4774222CFB76AEDA974FF
+:1024F000AE3FA7997AFF2EE06FD2B57309EC314356
+:102500000146C546FB06E1D7A7867DD761CECD46FD
+:10251000F2174E31FBEB58EF3843D3B3E3B87DD518
+:10252000E7CBE789F73C9B55BE5FA43B3F334F3B6E
+:10253000DFA43BEF364FF83BF374FECED3E9C28FF6
+:102540001FC286A01EAC17E7EFD60E8FF287E7B347
+:10255000F4ED61B12F82E787B0AD19FE2EE57D8ED7
+:10256000B59E7D85EADDCE46B1813CAF47F9EFCA25
+:102570003EF2DF35DD72393782CF34BA5C12DF8349
+:10258000D1D365B7A6AFC4BE5DB4D8B7F31BBDBB8E
+:10259000519E2B2D174DBCEE3068427D56339CFB6F
+:1025A0004D974A25DA6F0738FB9BC3F4FBA5541EF1
+:1025B0007FDD7F8B4479D7567C1EE3AC7A89EABCF9
+:1025C0002B03ED26E4A7210D8B1F26B9F5B1D32CE3
+:1025D000ECBB1A332DDC4E76D34F5B77B71D8BF7F0
+:1025E000717D9C482D3E8F767186B083FA7351437E
+:1025F000597B593AC033DF2DB9B01EA02F3ACF5EB8
+:1026000030EA7544C3F5D2BB33DDFB4E3ACA79FBE1
+:10261000E55B308F7A6CF867FDD18E56F5C1C71F28
+:102620000B3CEBBF2BE31AAAD6E2F7556A9DDE0EF0
+:10263000D29F866F6347301CA7E3376B25A4132313
+:10264000FEEF4B7E3E13E37E96CEBF770FB8A77D9D
+:102650009755E9BC4EEB98D19F41798A9CEBDBF70B
+:10266000AAD9F7462EEAB3CED6A3B9A630BA5E5C95
+:102670000B7A00ED4AF3C164D516CE7706E23749EE
+:10268000D2F84F11F632920F2F221FE6607B26768A
+:1026900010EAE35DA76207E3787B79DBCDAF4DFC01
+:1026A0007BF6101F0D9917130EDFC304DFA57A3ECA
+:1026B0000E631D43E68C0CBF5FDB171F5B33888FF7
+:1026C0003B22F8585B6F3D7ECF07E38016337DCF0A
+:1026D00007F3D78E3039199AC1F5CF58F1FD9EF125
+:1026E000CC47DF391C2BBEE3335E6101251EF7CDDD
+:1026F0000232DFF7E5E72DC6087E1EAB045AB18E25
+:1027000062BCD8E799C0DAE9B9292C48AD9BD9E970
+:102710001C451173513BCE12988EEE544E7D3DD523
+:1027200025069215C7798B38AFD10BDD42EB57E800
+:10273000BB3DC49F329ED7E9FDBB2FB333B8DCD37A
+:10274000C74590BE9718E5B9F07B6D38C9448595AB
+:10275000637DD3648559A201DE5D870C24CF2D1DD6
+:10276000AA1FEB535D09E2BDCF19D5E18E757379D0
+:10277000459383F518DA7AF5789800E3619E6DAC9D
+:10278000029128E13140F3DDC8F8399242A652FDAA
+:10279000736946A6D0F7418AA38A218E427D6FB025
+:1027A000F8081FD33354BA8FFB25B130CE848D1275
+:1027B0007B0FF73FB2F87AB5F1270023E0F9C2E9C1
+:1027C00019DC9E614AF5BD78BE8F124B05CD25768A
+:1027D000FE9DA364FACED1F5E2B52B997FEF32F6D8
+:1027E000CE60E7CF0A42FB492EFCEE516CE83B9BE2
+:1027F0002EEDDF830844FE7B1077642CF911F2A3E1
+:1028000056AFC7BCFCDF7DD0D7EB85D5E7B10B61F8
+:10281000E7B0B5BA926DFED92A9EF35B9068A173BA
+:10282000BF7996FEF968C7063ABD34FEFBD2F6C101
+:102830003498E21FED8909F1BB95B9C721BE4375F4
+:1028400083FC3B50DDE7AE92199D57B49A797DE544
+:1028500063201FF81D26902E15EB68D883C5548F72
+:10286000B9DE6171E1790933C26D0DC15D6B11DFB4
+:1028700005B5F07D717D3D68ADCD40DF1DAD65D105
+:10288000740E3D29DABB2E03E0BA2FA688CE7767F7
+:10289000EF9CE444BF317CFD93B4F51B7AD647C26C
+:1028A0007A1FC9E8A51E515BA7F6EF76D805FEB4DE
+:1028B00075DBB5734A6E25E29C92868FC7A2F9BA82
+:1028C0008DB8F39F45EFAAA837F4EBFDFFDC29BCD8
+:1028D00016A06400000000000000000000000000DE
+:1028E0001F8B080000000000000BD3D76660F85172
+:1028F0008FC02E9A0C0C5DD2A862B4C41D120C0CB1
+:102900009780F80B106702EDF5926460F006E26DB7
+:1029100040BC1D88C5A518180280381088FB80FCB3
+:102920007E204E07E224A81BB30519187281381FB8
+:10293000880B815848808141588078FBCB15191845
+:102940005EAB22F85A6A0C0CC91AF4F3FF60C38E0E
+:10295000B6F4B5EF14D0BEE56E08BE0490BDC20D4E
+:1029600055CD4A37FC66AC42935F8DC65F83477F87
+:10297000A20D2A7F99292A7F9D3903C3432435CB91
+:102980004DF1BB051D0B02FD2784274C9730A2F2A9
+:102990002732A1F2F9A17C00BA0B8074A8030000D1
+:1029A00000000000000000001F8B08000000000075
+:1029B000000BED7D0D7854D599F0B93F73672699DA
+:1029C00099DC24433260126E7ED0A001879860B0FB
+:1029D000586E20E147A30E082CB440262888166DB7
+:1029E000C49FC6DD500609BF0921E14F70D11D10FB
+:1029F0005DEA63FBC5565B75BB7682D646AB356830
+:102A0000D787767765A015BFBA761BD96D976EBB51
+:102A1000F57BDFF79CCBCCBD9900FEECB7BBDFF3B9
+:102A2000C5C7E770EE3D3FEF79CFFB7FDE73C7C5CB
+:102A300046B1E058C63EC6BF698C4DCC658CD5A664
+:102A4000CA160F8B65E73096DB213156C3D8CA769C
+:102A5000253E0BFE59D8D1F20AD697B7B90D772982
+:102A600063FD0FB8FD35503FBD5D09BBA16BA3E20F
+:102A7000A3FAB22E57D86DC0F3AD1FBD9C8FEF37B0
+:102A80004A610675C6EE666C32636B3CF04FA82F48
+:102A9000AB4876E0FB77B748E118BE66A66F12BC7C
+:102AA000BF95F1F7CD0F281A93A1BEEFB626369148
+:102AB000B15B7A60160F35641FF3F68C153016E1A2
+:102AC0008F58CB16785F997A1F615D1F29D0AF3977
+:102AD000E678BE6FD6FB2C80EFB5D47358CF31FCAF
+:102AE000C714C62E65FEE0E96CF87798853F56A0BE
+:102AF0006CC8676C740A5FCE9231807E1463731960
+:102B000073B17218A7F632172B83F559786CE378F6
+:102B10005CD624111E97F918D5DF9D2BC51F2CA557
+:102B20007E6C7A3594F0BC200FCA20330BA18C78D0
+:102B300058221BE09FDB76D97BB8FE0D38D5686A3A
+:102B40009F08C0FB052CEA6200DF9FB118958B59E6
+:102B50009CCA2FB304C1B1940D95A850BF4B496CCA
+:102B600062304F38149D8EFBFBBBFA63EF4AF0FED8
+:102B7000FE6AA9760A94CC9747EBBED0FAACF95519
+:102B800016B90EC7614C7645FC8C8DB7D67998C5C1
+:102B90002A828CE93D3E4E2F87593F83FAF8064141
+:102BA0002F8DEFCB215877CFF32C8CF5106CE614DA
+:102BB000A887BAB2E21BA0DEF378AC1EF172AC05B6
+:102BC000300FFD8F35BAA56815942EDD158132A41E
+:102BD00032A6009EEA1BD64B0AB49B1BE5E38C375A
+:102BE00035995D09F5C3314915CFB1BFAEC7241D75
+:102BF000EAE3A1FEA084EF751783711A1A725DC90A
+:102C00002AC477CF181DCA8AC35A4206FCD69B3AFB
+:102C10003D676C11D1D578416B734DDE6FEEE13CB1
+:102C20003FA3F7EC4F1F5BEF01BF9714F17D3B769D
+:102C3000B82C07E165517BFF2295C53C79293CEF13
+:102C40005C072FDC29FCEE3A5CB615F176AC4F0D33
+:102C50000B52B68D0FE3F636C0FB335572583190E8
+:102C6000CF8A38FC15BA5FF7A5C6D9B90EDA5F96D8
+:102C700082A35199DA4FF83019F1E3DC1A685F95B5
+:102C80006AFF04B60738F6203CD46FCD512FCE131F
+:102C90006134CF48F4F0C23A9DFA0D8A755CF3BFF7
+:102CA000C3B44F731B5A243EAF80AFC10E9F555A19
+:102CB000F08D34FE31019735BE35DF13EB425436CB
+:102CC0002A558FDC8BEB3AA2F175CD371EDF8DF8DC
+:102CD0003BE209C7A0FEE4757F33E65E18E28AE9AD
+:102CE000CF5FFE0CC3F9963F7C3BAEEBB92C5AD7B5
+:102CF000531F9E79ED46367CDEB7041E7E7A6EFE4B
+:102D000010D5ADF9E79AD21809E8ACD294122EA0EA
+:102D10009763F55F79F85E03EBFD26CA934AF39853
+:102D20002941391186A1FD66EA9F3E06795609DDE3
+:102D3000911F2735482DD8EE891B1FFAD27DF0E868
+:102D4000A72E0EF7157FC9E1BEECFAB54F22BC974E
+:102D5000DDB8F6E7CF40FD0A1482C07797DEB47F76
+:102D6000CDDFC13FBFB1F02F97EF61241762D900CB
+:102D700047AE2931DCDF65DF77DBE4CAB1E7FD244C
+:102D8000570ACDD218F2DFB23E89E4737FA39B05C8
+:102D9000F1FDCFDC7137F2D7039249ED9F75C75132
+:102DA0003E1C733186F278D9716F1CF985AD5A4695
+:102DB000F23A62C96B337FE9BD30DEBB0D963CE76A
+:102DC000744AEF617DEF9ABFD87E35F43F63BAC293
+:102DD00028362D79E1C4F3BB02BF91FA72A2836554
+:102DE0006AD215CE400FCD6D8A4D6ED7379C24BA6E
+:102DF0005A06254BE3D3B982CF9635FC42F0A74E55
+:102E000072C909CF1BB585C599E8EE94802729E8DA
+:102E1000ED5DDCEFCB103EE88574D3A5C495343965
+:102E20000D7FAEC804AAC790A56FD96287D392DB85
+:102E30002DB16C9BBE02F9FB2F28379BDBF26DCFC7
+:102E4000E7E6B0DAA99F4E0EFF81E4705222784087
+:102E5000FFD2FE47E2521CE5A2B53F7788FD8954B8
+:102E6000305ACFAF0E48F118ECEFAF8E88F5ED93E6
+:102E7000E28A44F46A9EF6E0B83067796AFF6F1719
+:102E8000FB9FDA3F8E1F0B5F293D97BB290920B4BA
+:102E9000F8222528AF2DFEB1F0DBBFE74725B87F2C
+:102EA000856DA5DD7508E70185F8F7C3FA93C5B808
+:102EB0006FEFBA00AFD03F72F8B100F3A5E06F1129
+:102EC00072F0830EA017782E219C9569700AB85D68
+:102ED000588776B737487DC8A7BF14F35AFD7EB42C
+:102EE00065C64CC4CF1D3D1243FCDC7EA477D99F40
+:102EF000C3FA57C7B3C338C5AF1A8B0397003C2B2F
+:102F00007AECFB796ACBCD01A49B0FFBF20B709C92
+:102F1000DBA72634847375E255CD003A9B65F66ACB
+:102F2000C90C74F561DF8600B6FF50EDB9F11A9C4B
+:102F3000679F125E0FE3AF3E523AD3E4744AF4BB8C
+:102F40005AE0F7A4DA33730CC0D7F28D729207EF10
+:102F5000F529B3E319E4E7D72585E860759B5BC6DF
+:102F6000758E442F1F76B85802E7511384CF91DA3B
+:102F70007DD0D742EFFB1F28BC01EDB7DBDB5D2422
+:102F80002F6E6F73133DAD6E90E24C4AF1DB0A0178
+:102F9000EFEADD0ABD3F694A243FACFDBA5DD0DBF4
+:102FA000C9C357BD82FAFE0CC81F94BB3336FE500E
+:102FB000BB04F0B0620B97472777E72EBD07E58883
+:102FC000D0977788716F8B2B36FE58D99E6DDB8F2B
+:102FD0006857BEAD7EFA48FE8D7548D75D0AE9CFC9
+:102FE0005B363EA685483ED9ED4DE4B0490529FB48
+:102FF000F2041B5A708D94A2278B7E6E6D037B3377
+:1030000030DCDE6C3922913D7AD176661BD899137B
+:1030100087DB99961C89A07D569E922396DCB84B3F
+:10302000898E0D021CBF76452FCB2F27B9F1805416
+:103030008B74A2FF16ED4A16536A51BE5DACBCA05C
+:10304000C55A7C047FEF75005D65A0D719485730DD
+:10305000CFCC9EFE8CF43C433268BC14DDDC1220E5
+:10306000BEC541018E668FD985705E02137BABA908
+:10307000644A1E2F55A86F4698811E4EAD95E28773
+:103080004A793B1FCA5380EB1A78DEDC75797C9B4A
+:10309000847621FCA1FE6CE37637B433FD79F4DC51
+:1030A00094A02C6A2F7D19F7E71210005A356F8F04
+:1030B000F3809D452881F6097735758D05A02C860E
+:1030C0007E32EF4FEFB15D80E4789CD68BE3E3383E
+:1030D000154A7C0DCA198B8E9709B90372B5520532
+:1030E000FA6A665961D49BCD6DE5E7B55F6E08DB82
+:1030F000E5C74D75763D30D7B4CBFF9B675F626BFC
+:10310000BF20526E7BFF678BAEB0BD5F1CBDCA5641
+:10311000FFF2AA2FD8DA2F6D9D61F7937E9A4BEBC1
+:103120005923F87224B85F17F2F2270EFBD42A9BBA
+:10313000AE4FD4BC0DFBC4D6B9C38F4371620E5BD6
+:10314000D49726577CB244F8FC0DB009F70FFEF473
+:1031500031E131C4E76DFA0B776B26BAD3443F34C3
+:1031600097D05E72B63FB118E649EBF76F924474A0
+:1031700078AE1FF3F4FC12406E014ECE01D4DFC9CD
+:103180009225B86FEE5C83DEDF25270BB0FE1B3681
+:10319000B4371FF7D7972C46FE6956D973520EF6EF
+:1031A0000B7BDC301F5843AC0DE8A3A5ED47C7D11E
+:1031B0008E938C205B82758F2F81FCCD3A5C1F260D
+:1031C0002DBC031FF686A21F4A0087D4DEFF7B09B1
+:1031D000DF7F9F19A88759B22817FD479C2A9D0FAA
+:1031E0009B66B056C4D789463BDEBC621D3F9764E0
+:1031F0006AF71C337F8B7C7452D2F9FA04BCDB244F
+:10320000F32CCE67C1FD6EAEAEB14F07B722D72209
+:10321000DC3F22B837B4B264B63232DC5730D32D3B
+:103220008F1A0ECF596666657A3E0BD835D3F3CB2D
+:10323000DDAC12EDD5135256787D299643FFF83553
+:10324000E0ABD8377CE1C78DE1743155CEA5F99B51
+:1032500085BD5BD82E25B2D13E651EB25F59CF43E6
+:10326000A607E59A10712D6DD2495C3FEB68349347
+:103270009ED47A9921B1F476E7F6BDCD4DED2D7946
+:1032800063C92D0B9F965CB1E4978557E7F823C976
+:10329000191C4FCD43F8A393E4743AD1011F1310C6
+:1032A0001EB31AF7CFDA377023639EEA91F7CD92F7
+:1032B00053D08EA1FF3FD27E019EC8AE738519E127
+:1032C000E9DDE0D0D2A760DD036D5C5FBF5BC4C801
+:1032D0003E3CD376D5400EE2C7E3A940FC14F2A9E8
+:1032E000586170681DCA579F9AE847B80A85FEF270
+:1032F00032AEBF0A99B1E36AF4EFDB4F2EC176D646
+:10330000FEE48AFD6986FD417FA4D937548C76920C
+:103310001BF51AB47383DC45B95CD8FEFE7FA05E52
+:103320002C74E8458484A5C39155B5E36A237DFCDC
+:103330008F36A27D698D4B1DD2F73FA89D44FC16A8
+:10334000B66FBE5B09D8C6973E463C08B98D66D7B6
+:10335000B9794AD15E9513EE408A2E9C7059FD468C
+:10336000A213963E4FB9AD4EF684B3EE0E6B36F90E
+:10337000FCEE1FCB735A7DE7A137E7784EFA76F261
+:1033800081C0C3A7A0D34D9C4EB95CB0F8F63F8B6B
+:103390004EA3D6BEC672EF3882FAB54B0BCF32D0F1
+:1033A0004E18FA21B713DCC621A4B398945509EF3F
+:1033B000A31D2AD98D965DD1BFF6AFB794C1F31383
+:1033C000B532F91127D673BADFF300B7472DBD1D0B
+:1033D000157A1BED02C42BD80D036E5E7A701CFFAC
+:1033E000FA9B4B2580DB630CF5BBB17D9B41F66AF4
+:1033F0004E5D5C6F84325E71C833CE48C9A5642CC3
+:103400003F6F39ECD7B7728D6511B2AFA3A3E7FA5E
+:1034100053EF7F2C73FD34AD84E5CD86F1925BE5EF
+:10342000F083D03FE9B2EB31AB5CA3707D99F4B28D
+:1034300012F483476A37A4587A55D7685FE60F1CA1
+:10344000C77D1A691F6007748A639EA3438E7798AD
+:1034500087C64FFAED7AE8A4D04316FC9F40AF2E02
+:103460002C06FAD82B6586FB23315EF4390000F672
+:103470003BAA3233533BE7BAFF41F44BC82ACDB7DE
+:10348000A362E76CDCEF584C09A7EF8755FE85C2B5
+:10349000F567CEDC86DC4668C7D6676E9727DA3DCF
+:1034A000765FD622F4AF00752AC66B42317DDE6CA2
+:1034B0008C474ECD9B843EF68F51FFC0BCBB23672B
+:1034C000F416DF27C247414819191F6FCA32DF4778
+:1034D00007DFEE01770DE56752F250FCA525E6CE39
+:1034E000C8C7969C72CA23A79E934C93B5550F9755
+:1034F0002BD6B89F549F817CC85246A5ECF673FA30
+:10350000EC62E97104395022B3685F06FFF46A8502
+:10351000E3A93FC6E314AA2993DE9AA9343109F03E
+:10352000B421C8481EE4E15E23DF36B038A080E550
+:10353000B3F0800FE549506609F25B9D7EA0D98407
+:103540007E609083C6F45165FD85F03C387F259DF3
+:1035500033B00897B73AFCC7F9C8247DE116788DD7
+:10356000C626519C33AFC92EC7DDE807827CD41B29
+:103570001CCFE7CFA4F306374B7B0EEBB84AF1071D
+:103580004F8369CFAA590DF267F5FEAB762D86F110
+:103590006B1EB9F96D2C271FBC27FF4B50D63DBEC3
+:1035A000EB662C4B5E8B8ECD144FB54AE01426D7BC
+:1035B000017C3E66B873466E67AC57226857C33EBF
+:1035C00076203D2463E55948DFAB14CEFFFD0BB4F4
+:1035D00000C667D42D5CAEAAF3017944FFDC4F6FBF
+:1035E0004EF9D3E457A8C24F52DA158A2324F53294
+:1035F0008AB71CDA226B58829C8DE13CD6FCBD2236
+:103600004EDD29E2AD4EF87A4B868A510E9E58FF68
+:1036100011D9878A9E159E0DF375F95909C121E2CA
+:1036200005CD62FF926BEB3DE9F12245F8391D476C
+:10363000E70C184807034AD86B10DF68386E74CB64
+:103640007486F197597A98A13DD129FC1EC567323D
+:10365000DCD76C9DCD44BF165E6921EC5FC5C20905
+:10366000ECDFDE8FB885F59AB7231FFCE05A6E8732
+:103670009C28B5CB6D20A12ED85336AB68BD8AB43B
+:10368000D9149C7415D2FCEF9502215739BDBE5157
+:103690003BE5B16D4007CFB9CD7B94519F808F1C26
+:1036A00072FD07C026B86F8F4A76796E95079D7CAC
+:1036B000D426915DA89A7C9D33950F1B514F6E04C3
+:1036C000BBB1D018CE2F1B5F6764376E04FE8B959D
+:1036D00066E29F6A0965C4C5F24F5E7BAE84718C59
+:1036E000CFCA3F7FA988733AC13F406709B4631EC0
+:1036F000958CCE29B0BEEFEC6BFCF11478FDEC811B
+:1037000015D9D740F9BDF8C6EBAF81F96F7F7C4F73
+:1037100036EEF3A3AF023F9DC78FB7F8A9196DD856
+:10372000F3C4D98CB5767E32D657103FBDA570FD57
+:10373000D5BFE0776F5CFDFFF9E97CFCF4B602F4DD
+:1037400039ED4F678BA3E7916FCD454C437B0BDA87
+:103750009848E7D1A0BDF4A95984EF752E2EC7FC77
+:103760002E2FB73B42FCBD73BCBF513F79FC60417B
+:10377000F967E7D3753EF3A3CF83DF41EE90BC3901
+:1037800031CECEF79D2E4E77BF727DE2F5BDF3852B
+:10379000CF617D60D7937D779DCA0CF40326BEE090
+:1037A0002161F1EAB88D479025A6C1F3501E7FEF45
+:1037B000CE237919473B6648A9A4FE26E3767C53BD
+:1037C000CDE623FC5C62B06211F8CB73E05F688FDA
+:1037D0005CE7E37E058CC34230FE6A6FB4581D453A
+:1037E000E3917FF9EAF3FB82285F5EF79825F89C66
+:1037F00025D55C3C1FB0EC8E91F95D65A7D3FCAC80
+:10380000A73546709CBA54A378258AB100D4B796E0
+:103810005E4A714A168E1D97B03E4A6728C795606A
+:103820006431D9216D6E6316D4B78201150B12DD98
+:1038300092DC54DA7B430194036097E07B3536D702
+:10384000A3A1FF324AC6203473B77D447EF7896254
+:103850002E6F3BA6303AA71978E0DF96CA68EFB41E
+:10386000BBE9DC02EC46E2D7A8901BC9E0F4500BA0
+:10387000FA19455A5882FAA6D82F8E7F8DCB13D3CA
+:1038800033393D3EC2E31D2D21EEEF3AEDBECD5F53
+:10389000BFEC4D03C7FBE16B5D9743F9FA933F7FA4
+:1038A000FD7278F7C6B75EABC1B8B7BB4EB3C51DE6
+:1038B000DDCC7813ED2DF099121ACAE7D8C925B8D6
+:1038C0009929BF4E8A217EA235FE38AE17791BF1A9
+:1038D000939CA2F0F345F80B017C01015F77F05453
+:1038E00015CD137BFF3F32C97BFA9B2CF408B4DB68
+:1038F0009C777F1CE5486ABE49249FA2209FD08FF9
+:103900008CFA7A96ACA1F9FCE107B1CF1F61572779
+:10391000A7CE0B0F6D99D782789EBBC0A3239DB90C
+:10392000639BEF463A77AEF38CEFC14B3134679B24
+:103930001FF8C45DA1995EB27FD961DA0FD1C4824C
+:103940005B0705827107E8BF6C05CBD0DF80FEB84E
+:103950004E9067686F5BFD808C4D5CEF19DFF44B18
+:1039600029DE2FE21556BF9B62129D13DC540E6CAC
+:10397000503E1C4F1B7CF24FBE86E72E3145573818
+:103980001D842AD2F0867FF6B819A78BCBF6D9F51D
+:103990002ECCBFB014DFC714A21727BF8C8FDBDB80
+:1039A0006FF09DFF5C7FF87E723C4F14FC66F5B7AC
+:1039B000E02378A54CF175FBB9CC4D75F6FADC61C6
+:1039C000F8383F5CD355FBB94D83CF3EDECCA0FD2C
+:1039D000FDEC227B7D03C66F3EC9BA1D7CF7F4184F
+:1039E000F33BEA67F0EB2DB9FBBE27F2B7348E1A32
+:1039F00066384EFF82BDF3E7011D14EADCEE289C19
+:103A0000BFB021B706E51413792699ED8F42A1EFD7
+:103A100095F697941CF4474DDE3EB9E4AD1939781C
+:103A20005E5CC7E83C3DAADE13CB3152F648BF5A74
+:103A30009E8578FEFCED91BBBDE97937297BE48159
+:103A4000578D9A0CF6887A8F64C238B396803D52AF
+:103A5000956E8FB44A2883B297803D427647F43DF5
+:103A6000C4D74876C98F2DFBDE9FD9AEFE83CAF539
+:103A70002CE8997FFA2C7A669CD7FC17F573B0076F
+:103A8000A695182B2319E8F00395C73B2CFDD918F0
+:103A90004C2878760E7A5375C1F36BEB922FA138D0
+:103AA000EED0770671DDB01E97ABF6D3AFE78CCAC8
+:103AB000E199A8F23C9891FA7D6B047FC5AB7985BA
+:103AC000DD62DFEFFE05EFE832FA2FE0C7A0FF92DC
+:103AD000F4956DC3B8E099984AF13A75FECADD7362
+:103AE000919EC0CEE6F47C7EFBFADA21D9C6C7D31C
+:103AF000CE66D9F8BE9ED9CFE96678ECE7748DBA68
+:103B0000FD9C6E56C87E4E37C7B09FD35D5F693F40
+:103B1000A773DAF73347BBFE7BDAF7A14646FC749E
+:103B200001FB1EF8E926A4A791F8E9BA7CE3FE4858
+:103B300086FDAED6B89DBADA1B59807437CDE076D3
+:103B40005D34B69EF201F3A2206F4A296E48712FB0
+:103B50002BAE65C5BDACBC402B9EE58C5F59712F6B
+:103B60002B8E25C578DCAAD9135D81F036B79F94DA
+:103B7000518EE8CFC13CC808D639DEB0F81C970793
+:103B80002DED99E372CEF8DB88ED3E255F7D0EFAD0
+:103B9000613DAED7D20FC0E70F7E163E07B9B50D17
+:103BA000C7FB17E4F751244FBA69FF2A00D768A76B
+:103BB000C33E6818A75F707A3FC6E3D4E36EE2DBCA
+:103BC0008BF57F31D141864D8B820F8EF1AC68AC85
+:103BD00094F48BC537169F38FDE361FCF15FCD3F50
+:103BE00017E91F03FF7CCF751E7D04FCF13CE27BCF
+:103BF0005A25C7AF931F2CFA07924848D5B8DFD192
+:103C000004B6B7E89DBD183611CE89C2AF39315A16
+:103C100023FFE2C4F3FFCECF619FF784C78935E26B
+:103C2000FB89DD05F16DA5293EB3F8A9DD13FDB1D2
+:103C30002B2D0FC4CA773CEC315FC7E721B52F812C
+:103C4000FE4A68360B6F3088CF8EF1E79C4F7D615E
+:103C500046F1D3CFEC97ED75C5F17CA8451A5ACA49
+:103C6000C86F651AF2AD2AE4C98B59D19388CFE6A3
+:103C7000E991124E4F43E37C00D72F3A14F2D73E1E
+:103C80002B3F358F84FF73F8880EB96A87E707A446
+:103C9000CB2D946FA19016DF20659057025F7116AF
+:103CA0001E83EB83FDFC77C4635E15936839828FB6
+:103CB0009B3DE61F5C9FCDFE50B4DA141F03DE3C33
+:103CC0001ACAC56AC05BF970BC9D74F1F53BE92F57
+:103CD000A42665A4FF10C8D10D52DA39A9C08BB54E
+:103CE0009E91E4B345A769E70D212D7DBDFF8FCAE5
+:103CF000654B5E5EEE894EC67D709B1121FF4CDAEE
+:103D00005FA79C196E07C974CE7806EC1EEC76B1DD
+:103D1000F275DA592F1E96B0A967152AAF3D4B8769
+:103D200027EC8B67B3A934CFE653597F3697CAE99E
+:103D3000672FA172C6D9D154369C0560C0C4693CB6
+:103D40005B4AE5CCB3575039EBEC782A679FBD8AC4
+:103D5000DACD393B89CAEBCE7E81CAEBCF4EA1D2F8
+:103D600069FF18EB5592DF96FCB2E4BB537E5BF221
+:103D7000EFFF9AFC8E355C94FD03FAEFABDA79E441
+:103D8000F748F202F8FA3E2D5D4EA4F4F3FDDA672F
+:103D9000E0EBE3824F817FDFC3388C07BC388A5366
+:103DA00085799C2A606806E669ECC326B0A5FED238
+:103DB000C8498C1B342FF0E831807BA05423F9B420
+:103DC0002DA8D1B9DB66491FCDE5413281F4B73367
+:103DD000A4D178DBFEA878317FE1A55105019CA72D
+:103DE000DB2FEBD8FE5BB9C97DB7E039FE14163E78
+:103DF00004E3ADD8B3C793EE87EF47E300E00BC40D
+:103E00009E660CF87AE3A8DF2DC5F97C5319C563CB
+:103E1000A03433E58B7DD32DCEA7D5A110E269ABBD
+:103E20004F267DD0AD7B441E6A72A005FDDC3A9919
+:103E30006D8379378C7E670B82AD8E2BDB5106F557
+:103E40009D75655EDCA4A75FF92044F604BC435071
+:103E5000A04C88D2CC81FDE9F4868DF39DB729C6AC
+:103E6000D03A2456ECEFAE1EB9DD26FF4008E9A398
+:103E700063D2E4CA5B60FEDE4905A371FEED3547FF
+:103E80006DF850747B3C45C18023FAE175498AABDB
+:103E90006D908D1D65B0BE80C8B706302B23697943
+:103EA00007161C4A18D6C1E14A287C3DAC009EE7A3
+:103EB000D6256249BE5E13E3AE3E5F3284FEA25257
+:103EC000779AE26D9DFEE422AA3BE0B0C6FFAD66A4
+:103ED000E50570BEF109BE699EF4ED4594475EA507
+:103EE000D1BE75BB8616603DB6D6C51ECF10BFD9F4
+:103EF00020F8795BE5F9E332AACF0E47B7D7EE2F6A
+:103F00005AF0BC2F4A271CCDAEA15199F6EFD3CE63
+:103F10007FA1757FDEF3758E903F70B9DBBE0F0118
+:103F200021CF9BA77C3B84E7E2163C9D12EC43CD5E
+:103F3000E7BF0FCD53B8BCFEBCD7FB3F6DDCDF6BDA
+:103F40003CAE027C3ABB1CE38C632687305EEBB34D
+:103F5000E2D1E138E52705301E4DBD0CD243AACE93
+:103F6000C7505496403E94B33F4CE03E29D59AA1A9
+:103F7000909CCDBCEF4A7813E5B539F9D3829BFE0E
+:103F8000260BD381CE0FBD567CDA5027F3FB1218D7
+:103F9000FF5598753ECBE3D3567FB542A6783405DE
+:103FA000B2D3C651410FE3398E8271EABCE1F37F8F
+:103FB00037458FF6F98B787C5C51B91FF89EC4F1B8
+:103FC000117B55A17CCFAEE7B97C63C719C9EFAEB1
+:103FD0005A83CE5576C0FFE83FC46A7D71A45BC5A5
+:103FE000918F77A6727A08E5A81517A7F9F8F90056
+:103FF000C5B9314F91E2E606ABC0F7DD02346B1C68
+:10400000D58ACB57AE9984EDFC06F33C07EBF3D78A
+:10401000B1C425006FD0DDBAF5F2D20CF1F0CA358B
+:10402000DF7812E6DDFDD4F45F3D09F55D72F8D569
+:104030003A6897FFE53AC2AB331EBEAD523675946F
+:104040000F3EDF21DC57B0A1892E6EED9162F83C66
+:10405000DBE73BC8F7BB35A4205E404F225EBCCEF9
+:10406000BCC8747C97211C3B07E6C1BFBD5BE72D34
+:10407000C379116ECCAF5CD15BAFA19E092EB19F0D
+:104080005FF89BEC756F951DCEAD62FF2E44FFCEA1
+:104090003CC41E73DE22A4DB33418DA1BCD9B8F62B
+:1040A000EA1B49EE6F57D8B8D20CF4EB5857A7E685
+:1040B00022FDDF6DD4EFAD40BDD1A0515E4F77DC66
+:1040C0001BC714EFED75A973139BFD6E68FC1CAB49
+:1040D000464EB833D9F1E27C2C209E31C73958F7CF
+:1040E0006C99EC9AEE1E3E8F355E77DD5B1E941365
+:1040F000238DFBF418F3881BEDA968DE45DDBBB802
+:104100006FA38BD3F5142D2E95A23DAA2F5C04F539
+:10411000CDE364B28798F0FFBAAFE5E7890F6B860D
+:10412000ED7EC5A6292BC96EB8C9AD0BFE02BB70CA
+:1041300042EABEC501AFF9821B9EABCFC148600FFA
+:10414000BC971BBE11E9A231F811D951B716C93A73
+:10415000D2D78A3D8DB4AECDBACC1268F7AAAD6481
+:10416000A436B15613CF03305113E96E0EBC91E95A
+:104170005E44F25027C039675CE1A46D507317B5F7
+:10418000521E4BA321911F761D6006E5414B7144E1
+:1041900095AAB0DFFC77D0EE9B132C95D1DFBF4EF4
+:1041A000650D5A9A7D0E76F13177DABA4E8CDB13B3
+:1041B00094AB707E9807E75FE4A1FB046EB48FAF09
+:1041C0004CD9C71311916976F2AFD1A8C478465182
+:1041D000E2F794E7FDFDA48CF3B21758F536E993A6
+:1041E000FBD5E05FFE12F733CE8C7E4C35FCAC7114
+:1041F00089AF6B629FC4BD95C39EC86F707C2B1E38
+:104200003051E3F79B37B7B0702C2DAEB2F9F93FC0
+:104210003F8EF6AA157F39977727E0B4E0DE24B108
+:104220002CD2F39EE81FDCE97E314B96CD9DF0F950
+:10423000C19D215FCE570BFC3456F04F5E6D851744
+:10424000E5E658CCF7C17D68E7F2C484FFD2F37D80
+:1042500014C17CC1706BBF6C0C974B8AB837057466
+:104260002DA11DEBCC075230EF67E270B97140D041
+:10427000FF251E91FF33994DE67EB8FDFCCABF9421
+:10428000EB7DD69A97F11EEAF785DE7F51F8950906
+:1042900071AFF1A8B8B7F8F23A83FCBC57D65552C3
+:1042A00039B02E4CCF5F5B574765EA7E159F375F6D
+:1042B000D8612A06D5F09CDFC7E206C0EB1FB566C1
+:1042C000A014F9BC8EDFEFEE6E3AB5A59CEC467EED
+:1042D0006EB1B9A83A5188FE0BC09A0F7597AFCF4F
+:1042E000C3EF79998395055CCD21DEFFABCF2B9C85
+:1042F00074A15BFBEFD86F1F6B6528EF02A67DBF33
+:10430000B3C34EFF86EFBFABE8E2F6BD17FF01FB7C
+:10431000F8256BDFAF6657F3EF335C9C3C463EAA53
+:104320001472600CF0D301F0E7DD0ACF57CFE779C4
+:10433000AE6688F39BA9F27A6CBC68EFE224C406EF
+:10434000F2785E7B313F4FA07E98578EEF312CF98B
+:10435000028F6FB11C91FF3E568CB35A8C3BB19AC1
+:10436000EEEDF2F37FD6A763E96349AAE7021F6087
+:104370001964AD1222730C1B247FBB581AA2BA21F8
+:10438000E959582F93C265DC0F8F93FE2C57CC6FE1
+:104390005710F223328F172517933D097A19E562DA
+:1043A0005C8D2C42F9B2A14D0B0326CEE5C9E1FD8F
+:1043B000392C37F4D50CE0F9472C2693FC519E6339
+:1043C00059FA9564EF91FEDAB03EEF6036E56B2462
+:1043D00029CF7DBFA7D4A6A726FA165EA7C37E6DF8
+:1043E00014F9742EE8CF32E49F5AF974306E49A65E
+:1043F000F756B9D1AF2DCAE4F73FEC91443C2339CD
+:104400009AE280625FE353E58CF719F779B85DF3C0
+:104410006869667B9AB10769BCFD1EDD316EB285A5
+:10442000EECFE83CBE91E53229BF66631BBFA76FA4
+:10443000E16F34D8B5680F6FEC9B3F1BF93B56A971
+:1044400052BE39ACDF87F87389BCE48DE38307B3D0
+:10445000795CA214E5743FE2AF360D7FC1954D88BB
+:10446000BF8E57797E2FE8731FCB906F68E1CFE541
+:10447000635FCCF4DE2A3B46698B32DD1B3EEAB13A
+:10448000ECF46429A7138EBFAC6BD548A6F609815E
+:10449000EF9232163D1FFEFA3DBA6D5CEBDC571908
+:1044A00021DE25F91214E79AA8713B63C3628ED707
+:1044B0000DCF5F733C9A760EF14B1C724A2A1E6C2C
+:1044C000C58D2DBDD9EE89FEA367544A5FB2EF3387
+:1044D00092BBEC05CF41DCB70CE710A73CB519CE79
+:1044E000217A2EEEFB2E6305DF1EDA72741ECEF3E8
+:1044F00057758CECABC0337CDE5C9DC5E552FC4E41
+:104500008129619CE59A885E8FF69BAB9D99983FC7
+:104510003356C46D0ADBFB14A48B20EC65A184F731
+:104520009A9231FC9EC9D8DD8CFC44B570E6AAF5A0
+:104530008610A569F9510A1BEAA7F5B56BC6E3A574
+:1045400004D64F513F8C11EF03ED337F8572734CCE
+:10455000244A79B8D02FE647FB42E0B1C0CBF976C8
+:1045600079435892A07D3098A4F8A453AE8F01FCF3
+:104570005C9266BF05449DADE2725A86FF50CFE75C
+:1045800047EC727B9CE35E74C091F792EB15F9EEF9
+:1045900096DC2EE29B3A411D9433F9E529FDEA8031
+:1045A0000F655875AA7FC0AA7F46F88010889E2D97
+:1045B00078F02A25CADD3D2EFD2B4FA17EAED7789F
+:1045C0001E99B82F972DF0EE438719DA0D4C79C557
+:1045D000C47DDD11E6DFA53933751EF9A1D975D685
+:1045E0007D3A7E5F19CA18C6E9B2C5FCD6BDBA6C61
+:1045F00066BC590EF4906D26E95E9D6E7D57C164D0
+:1046000009CCC3D17D32E5D1E9BE08C9A79E051EFC
+:104610001DBFF3A1897B7A2E717F3CDB3C4DF7EB0C
+:10462000B287AD8FDFAFB3E0CECEAA7AB3DCB0CD28
+:10463000B31EE3DBB0F6D119EFD7D5713F29DBE428
+:104640007188B4F1E97EDD8EA965B6FB75340FFA89
+:104650007182FEAC7B764EB8CEF5ABC96CA74D0827
+:10466000DBED880BDDAF7385ECED775C203FEB1362
+:10467000DFAF137818D6CE610FBA2C3B7494CC7090
+:10468000FFCE34C8F41D91DC8F92911912C52548D4
+:10469000DF5B765E1E1FEABF9D9D9767E5F53BECED
+:1046A0003CCB7ECB9D6DC7B7D3EE735745A8CFC526
+:1046B000DA79BBF01F402F0F791D765E5366FA70D2
+:1046C000CA8B7C36B8FB4A18E768ED8F14CC57DBF1
+:1046D00095CBBF7FC486F9076FCDA07DF1F1EF1DAB
+:1046E000ED9AD2AFE2F76F7EB794919D64C511DC6D
+:1046F00002E65D45F27A0ABB773D44F8090A3C348C
+:10470000E107C86A0857F171C467A617F316F29B50
+:1047100018352AAC08D3BEE3670964BAB4155351FF
+:104720008FD72356D2F034C363FF4E40A39EEFD8F9
+:1047300047FB3E9F3B077F907F4F618E61DF77CBCA
+:104740004F427316E7BBBED24E0727A4C8A0025D36
+:104750009ECE2A15F6CFA08EFAB27BAD8BECC68723
+:1047600096946DBD12FDD5A0ACF3E3C8A171681F8E
+:10477000351F35BD68E76D8F4CF78E83F70F7528B1
+:1047800061340F9F5AB2E655ACC776BBC80E7AAA01
+:104790006F5EC18A34BEDBBC7BC1C2C5F8BEC345F7
+:1047A000FA7DC59EFB064A83D8DF559BFEBDA996C0
+:1047B0008DF7E9E8B7BD51EBCD68C75C9DC5ED92BB
+:1047C0008D5A92E24F1BE7690C5DAE8D25F5A3571C
+:1047D000A0FD708D96F13EF95D596E7E9FCFD52A72
+:1047E000A17C2F8C66BE1760B51B5BF35B3AC708D4
+:1047F000CE9619FA71AEEBE7C9587F08F655975275
+:10480000F49427E86963D1BD5B2B707D0399EF1D9C
+:104810005AE5DAAC719C4E23763E7715368DC67517
+:10482000BBDC91817A24AE4259C7B888CBDD1AB976
+:1048300019EDD1AB5D48E16C73C70F1B16E1BE8467
+:10484000255D8279826A6415D159308BA13E685802
+:10485000126945BC1482FEC3D05E61D12FE99CA2CF
+:10486000B04E635EA87B96F4245CF0DE5311BD0A63
+:10487000F1FED25AFE9D97C2A08FEE051546F8397B
+:104880005C61BB9BA1C9B0115C6017F90712C589B7
+:104890009C7C64ADAB792997E3BBD7FE7654A6EF39
+:1048A000CD546495115EBD867DDD1ED4BB30CE54E3
+:1048B000737009E1BBC6CDE2C4BF6EA2EF5DB52E39
+:1048C000826BD794935F41B87EF7FB2CDAEF6B993C
+:1048D00029215CF943FC9CD59A27BF6950E1F1700E
+:1048E000CE874EBEB3F8C109DFCED9F3E83C6E33B4
+:1048F0001B9C8FF88E9D95898E3617ADF1A6C74506
+:104900005B05FDC13E907C89E98CF65BF957B61ECC
+:10491000F361377E315289FCF1B697DF5BBD6FA939
+:1049200046EB7868AE46F1C687FCAD44F7A736BAC9
+:10493000C287101C555F88FBB9BBB8228CF1B6BF8B
+:10494000C3C3E734FF60F7A82F55223EBFF8872C7A
+:104950003ECE14D51AE76744EFB55E827386D2FE69
+:10496000B31568872E912753EEF4AA2524BF5C4225
+:104970008EBFBC24AF1EFD94C00DCB1997873C4E53
+:1049800011585BCDEF3338E47EA24EDD3D8376894E
+:10499000C77FEA85BC1B7BC3F47A5C67BDD00BA6DE
+:1049A0009AF9BB8CB9A27DE150044DB261F19F5CD4
+:1049B000A13FC6EE763C177A2177581C7CB0E266A0
+:1049C000903F5FCA1276E408719F5D4BE6113F9CF1
+:1049D000017EA0B874C949A2FF18C809B49BDF9032
+:1049E00092A11569E761D677E67E22E24111B39480
+:1049F000F284DF12F1A09F8AEFCEBD23E241C745CA
+:104A00003CE8E7221EF40F180FC2EF87792FA77D2D
+:104A10001B57F7513FC67176D62CF01830CE547D17
+:104A2000F02504F28BE6A04FE4DF13BC414B0FCD21
+:104A30003D7F9C2A8170B9312EC5E17C597C8FEE77
+:104A40001501D78080EB350197A507516E209DB1E8
+:104A5000B1AA9E491E06D55609CF7B515EF407497F
+:104A60005EF03CF1E01AC998305C4EC078A3D3EDFB
+:104A7000748BFE4E8DF2111D3BC77F348BDF3B7C68
+:104A800069EDACFD2C98268F220B5721DDE5C3FE86
+:104A9000A03C8A3671391EC57B176972D58AA7C1B9
+:104AA0008E8449EFDCC0F134927CB9905C2974C8E3
+:104AB00095DD2857A0BE1BE54A305DAEB4F6E3BADB
+:104AC000832857584A0F05239F4CAEFCCC5B668B5E
+:104AD0009358F2E56A6063B213C3A04FFD9F5E9FD7
+:104AE000BE2DE4C485F4AA95FF113019E9F53D986F
+:104AF0001782FECC7846F770147390F28972DB5DF2
+:104B00000CF341B66297D1E8CF2CA47C901DF33D05
+:104B10003AD2C5C3522284F8DC27F578F9BEE8FD05
+:104B2000682F6C9BC0E3243BFE788F17EDEC976EEB
+:104B30002F08E0394E6FAE9507A22FBE15EAA71ACF
+:104B400019D1C98A3D2B6C790F3FCFCA237CE4C6AB
+:104B500040FE003E1EBE9DEB1FDDE079205066CC7E
+:104B60000371FB443C488D85903EB649510FC561A9
+:104B70001A65D253BD619EBFD20B7E399E0FF636A9
+:104B8000EC9C83FA79C3AD32A37CF1CA9E7B50CEF4
+:104B9000744C5868205FBA4697BD89E6F8069FECCA
+:104BA0004DCF23C5E304AD9A9F1B8AD2CC01903729
+:104BB0007B4DE37CF74755E1F7617FF779F2E03B06
+:104BC0007343A3314ED0DBB83084F3F68E8A84F27F
+:104BD000283F650CD9031B476D5A8CF1A78EE51A47
+:104BE0004BB79386CD17B4DBD7569C516DE0F923B4
+:104BF0001D32F72F73C5F934F05525E22D7D9D0840
+:104C0000A76AF2FC115CAFC2D74BDF37CD6D00FF56
+:104C1000B08AAF1FFD57DDA78F46F9A136F0FC9192
+:104C2000CD7E7D31FA8D4E38ACF1AFCD966CFE91D4
+:104C30006EE52DD4AFE1E788453C6FA1D775FEBC8A
+:104C4000850E210F2DBF71247CB81CE7D4BD5E7B7F
+:104C50001CD082E74A513AE118295FE0D3CE7FA108
+:104C6000757FDEF38D9447B0265BB2DDAFC8B5F239
+:104C7000591AD784504E58F06CBE40FEC8A785AB79
+:104C8000B991B7FFBCD7FB3F6DDCFA6CAE1F814F0B
+:104C900007F01E65C7C499219443A978CCD0403948
+:104CA000DA73E23EA3953FE2D2F93F55957FE74E96
+:104CB000CE2EA2EF2CABD379FE08FD65C803D9C474
+:104CC000D86CF4775411BF71F2E985E077E68DDC9A
+:104CD000EC137E63D4319FC813618EBC1335C4F3CB
+:104CE0004BAC7C922E09D6174CE5838C38AF036F02
+:104CF000E385DC7FCFD17FD8BAC3FC7EA5957F3218
+:104D00002C8F64AABC1FB760581E89C847E9C935F3
+:104D1000E23C4F9CE795A0DAC478DEB03C92A9D380
+:104D200043F84DC96925A2DF0D8CBEBFDBE3E5F575
+:104D3000DE392C8EDF3BEBC53AF2532DA3BC9661D6
+:104D4000F92553D7109E341659C6CF77F879BF8509
+:104D500007677EC905E9ED027924419FF53D8A0880
+:104D6000CDD3E30FFFA48EE093E93CBEE04BC7C375
+:104D7000E9E35FE2E372B247E4E1F5E4DAF3F1EE8E
+:104D800013FB5221DA39F7572FE274DD55AF53DCAC
+:104D9000DDDDC0E395C3BE035163F7079CF1BC138F
+:104DA000425E5F68FDCEB8DEB611EE9B2DF0F13CA1
+:104DB000AE87961CA2BCD833AB40CF02BE1EC67CC9
+:104DC000969A8BCF67793D8BE7B3F41AF50B2F4595
+:104DD0003D16D518CAD35ECC6781F71B1A46C86743
+:104DE00011F1442B3E3A523E4BEEB9F3787B3E4BE9
+:104DF000EFAD3C9FA5B787CF638DD7DB504D76D6FF
+:104E000048E33E3DC6947DB8FF1517777E3AAD2442
+:104E1000F26798BFD253AAE90F1A482F9C9EBB1A7B
+:104E200035A2EF2E17F76363A3B9DFCCD4786821DE
+:104E3000B4D9E24F2CA278B2C8CBE815F7E7FF3E11
+:104E4000CBB0D9C79D8DDF0DA15D0F74F8B2CEF93F
+:104E500084C6C9574BD7830DC8DC7A8B893EE540A1
+:104E6000368F23B842C706EAD2E8748BD077881F02
+:104E700019F0932B9DC357542EA0E83EFDAD11F4BD
+:104E8000F946369FDFA243A64E0AF3F33F568172DE
+:104E9000C4F25F87B5F3F076C3E48F438EF4607E8F
+:104EA0001B562C797283254FEC7469C90FE6903339
+:104EB000E7E4C91C6EA79F9327203FF053674E3944
+:104EC000D4EBE5FAC282C78D8219E4C87BAEB02D5F
+:104ED0004EE3943B17E2A3CF5BEEBC949D2FEC0F07
+:104EE0002E7782481BC837D9D63922BFF77066EAB9
+:104EF00083240F3D2A5FB727C2E87702B08EF2DC29
+:104F000083E72819E57AB544F106712E922FBE3F4A
+:104F1000F8B02B4CF9690F033FA39F37C170DA67D4
+:104F2000E73F57709E273DBCF66BDC3F037CA3DF59
+:104F300075B172C892131F66F3759FA32F93C3694F
+:104F4000D1571A3DD3F7052CFAB5C6B5E898218399
+:104F5000169C875E055D63389AE2D431298E711004
+:104F60002B8FCC1AEF0D1FB74746BA5F65B5FB8E86
+:104F7000E5779D8B07EB019DF2C97AE8BE39EBE23C
+:104F8000F43787ED56D754513E81CA289F2052826C
+:104F9000FECC619FDD2FB6F2C1A69584432827364B
+:104FA000083BDDCA23B3F2D20EFB72AD73665B7EA3
+:104FB000DA8611EE67BF790E3F17FFFD13FC6EDB3B
+:104FC0006AAFF938CA45C09729BEE7447968D6B8B0
+:104FD000DF15787ADD633EE9FB0CF7275FCCB2E79B
+:104FE0005D75FA0C475C80E375A21EABA7FB785198
+:104FF0007EAFCA79AE3ED2FD57E7BDBD73F75FC540
+:10500000F97BB327FA32C1FF22CF7FD3C3D1839D6F
+:10501000ECF35BCF01AFF9131CBF53F0F7B420BF23
+:10502000B7F3BE27FA363EBF8E71BFDAB2730E6396
+:105030003BE8EF7F19A436D0CBA65A4EAF45958CEE
+:10504000BE3F3EBD95D7772CE5DF35ED7F9DDFFB7D
+:10505000D816E5DF33857E7D32E065C778AE0FF781
+:1050600057F17EFBF17E13F26905B7BBF2307AAFE0
+:10507000A0B88E5239BDA6C73B01DE1F582A535C2B
+:10508000748FE08B003329CEB1AD92CFB3AB427EAB
+:10509000427C8F66D12D50EF9CBD7232DE2FD92E0F
+:1050A000E229FB16AF7C02F3FA3E08940BBA4BD010
+:1050B000BDD79EE3B7517CE4A12579D24A58E3BE1F
+:1050C0008399F35BAAFCAAE817738B789228131ACA
+:1050D000965B4D91B7DACAC4F7D8631AC69F9E197A
+:1050E000E479ABDDAB9F393613F571A54C79665D7C
+:1050F0008347BD97E1BAEB785E4F919A90D2FD1746
+:10510000AFDFC5EDB49AA31EA36A78FB67068F12C2
+:10511000DD6D07BC2B69FE9F2CE0EC467F02FAEDAB
+:1051200075F50CCC84767BC7E5493123D56EB49FE9
+:10513000F35FF712597C879ED1771C3ACD531E94AA
+:105140009B9D78FE01EDBB6BACBCD41EBA97B577C6
+:10515000CEE4399827BEED061E2CED0A1F223FB97A
+:105160006736B7CBF64AD00EF6655F8B763DDD63CA
+:105170006AE571222833C6897A311118F12ACEEDF9
+:1051800028F505E6ED6CE81BC0798AEAF8F72D8A68
+:105190006A32F77F21E0A6FEFB5C318A7F8EB47F06
+:1051A000FFEAE3F8ECACE2E7058CC5292EB55BF825
+:1051B0005D4C8D1AE9DF096D0970FCEC743113E365
+:1051C00065BE3A8DF4BA1C36C80EF583FD88F1B879
+:1051D0006D526C31E687C42669EC71C288E91D877F
+:1051E000F1BB097961A4BF4D522284DF558E8DE356
+:1051F000F1EDA3919D74EFEA00D8D1140E6609D2A7
+:1052000053DDD13CBA0F7534523D48FD7D15BADBF4
+:10521000D22898374F1F8A646CD2659BB6A25DD3A3
+:105220003945D6316FB353AA8FE278B15C0FC5917F
+:105230005D53E6D1FEB946E549E9FAE8463FD70BAA
+:105240002727446EF4C3BA42534EE562DC727BED0D
+:105250002BFB70FF1EB9DF4374F448EDE0DD38CF5F
+:10526000FEB3571D8F125FF2F3BA476B4F97A2DD63
+:10527000B3ABE9542EE2AF18E373A00F8B2B781C6D
+:105280000D3520D9676A0FBB19F058DCA631234DC4
+:105290001F7B193FCFC33FDF64927BF4F7CCE0293B
+:1052A0004F0B8EB784252E0DD0730FC6B32C3953F8
+:1052B0005CC71205200FF7AF78278679728F4C2CC8
+:1052C000A07B9445E23D494E18AF448CD7FFC62BD6
+:1052D000EBB1DDA3D50506CA8BE281A179A8248AAA
+:1052E000AB4E539C2D64DDFF881AFB6F25FA94E9C1
+:1052F0003B95C5E177FE02D711F0F5919E83F61438
+:105300003773AEE3E309E67D88BF6F4AADAF8E0B1E
+:10531000A6FC31FA437EBC97DFCB2ECEFA87B94A82
+:105320005ABE6D89880B6C920667935DFA00B7C30D
+:10533000C7B238C9B9E2AAD8DD3CDF364AF9B6CEE1
+:1053400079B7FBCFE95789EE51E737897B25FC77A1
+:105350006C4AC4EFD838E93E14CAAFEAB82A55DF20
+:10536000173D45F4FFB466DC95E97B0FFB845CD800
+:1053700024FC316BFCB1B97C7CABFEA8CEE9F1E931
+:1053800097F3AEAF82F5FC555BD9248C7FEE18C144
+:105390008F5B19E0F4973D00160EE881FED75EF3AF
+:1053A000623ECBD3325B8572AABE2AE14956093CE4
+:1053B000C2F8E48BC1F807C2DFF6A05CFA6AA092DB
+:1053C000E05A3195C70D3AAB1EA473A090CEF50EEE
+:1053D000F227CA775F282661DC7B790DD30F8978A5
+:1053E0004B0CF04F77E76596CAEBDF9E4B7E0EF0D5
+:1053F0000ABF5783B94993C5EF4F94E339D1A6BB90
+:1054000045FEAC8CF8EE14F300DFD23C078AC438BA
+:10541000F771FB1FFD0BEC5F2EE629AFFBEED750BB
+:105420008F17E99C2E52F0F57908BE5699117C6AC7
+:10543000E255F443B74F2A30906E0E84C26F374165
+:105440007DF92295E2F1E5351C8E03AD32FD1E900B
+:10545000BF4E3B48F7C74CD01769F832C4BC45353E
+:105460000909CFB58C56BE2E68E745B96884011E80
+:10547000A81B625DE7E09FA411FC459E41CC2D3A3C
+:10548000878795381ED0EFCA3ADECF1FEADB8272DB
+:105490006C791D871BF43BC15314D60EA2BE2F0A94
+:1054A000F1F196037E0E4929B8B22DB8EA64CABF5D
+:1054B0002AAAD10EA21F9C2DE05B19E6F0F4BF7E54
+:1054C0006A40E2E319385EB680375BAC9F12760B18
+:1054D000847E80F19E7225EAF15ECEA929CC38C483
+:1054E00067A37896F57E572BE001F0E317F3B0DD64
+:1054F0006EE2275862EC6399FF7E889116B7A8D8B0
+:10550000ADD9EA7EB17FAC8B3F273F8E5422AFCB23
+:10551000C2AF5B5965EFC76AD2EA6578BF8CD3FB2F
+:10552000FA6BF979C78109DC3E42BFE31C7F239DFA
+:105530004F311EEB0AE27B8DF45D49BB7DDCE2D688
+:1055400082E9281F8A071E9E27C37A8AEE65B292D7
+:1055500043F42C9D937F30DFB7D724E8FE6CF640F0
+:10556000240FE55D496BDE74FCFE5BF64094EAD9DE
+:1055700003AD26CF3F0317260FF3F5D2E6294539B1
+:10558000CDF3E958ABD68772AD361D4E785FF27217
+:10559000CF5CECBFF9EE574623FF1638FA7B72B8A2
+:1055A000FF50FC32B40AE0FCA7D7627B2BBE938D80
+:1055B00010E751F93296C53E90C7509688FC3B4B98
+:1055C0005E744E786752D427E887F2F15822DDCE18
+:1055D0007796D07EBC681F93CEDBEE34B51B29DEF8
+:1055E0003410E0F1A680B0577B98B19FF47B0DCFCB
+:1055F000F7F0E173D01F7D3547A7D37EF6B130D2E7
+:105600007371DB9FDCE9F2FAE640A9B8079D20BA86
+:10561000D74AB2E87C0FF898BE6F7A406DA573D672
+:10562000BE227EAE7974CE2B12E2B3E8399EA76D0E
+:10563000D9CBD36B12217CDEF56AF432E2CF11ECC8
+:105640004FCBDE74AEE792FA07491E8C8D322F9E47
+:10565000AFF957AB94C75A1205B8AA502E00491794
+:1056600002FC35B1F548374694D78DD5A25C05E5E7
+:10567000D560DFAE1B28FFA52B35EED60AB06BD167
+:105680007E1ADCEDB901ED9556B0460CB4174F7992
+:10569000F07B2ADDADD3F311CFCF442CFB3221E1D7
+:1056A000F8453F35C95EACD5351DE33013DC89D1F3
+:1056B000E9E77407E6BC534DDF139B7F71F9642360
+:1056C000E91384454ED323FD554749BF3CE11F4FA5
+:1056D0007AC8D22B961EA11141BEDC22F8A8CB4875
+:1056E00078249257C0BB00E72D2847808EFD455C8B
+:1056F0009E831CE672CED2277773BD6FC9CF0A3165
+:10570000CE2D286FA15F77ED13B937A05C1172D64B
+:105710001F3266E2F95C8590AF4C8D4938DF8129F4
+:10572000FC7B9501873CAD68E5E3748518D113E8EF
+:10573000A1834837078A12744FFC40EB5129FD9E24
+:10574000A9A5EF02AD4986FB3FAE8ECBC17142AE3B
+:105750007EC76F70FAF470B97A4EEF0979BBD53C09
+:10576000CAC4776133E661FDBDD0E73D1587C82F18
+:10577000D876EB29C2A7150F0D89786877D55BF429
+:105780007E7B94DF03D8654E9F43F047966B947FF2
+:105790005A73744E19FA1B4DCB35B4EB4E060AAC56
+:1057A000F32FEF42B4275B5791FDEB13FBF85098B2
+:1057B00009BF53233FEBBEA5DF1EC0FE21F08B24A3
+:1057C000031BF579DC48E7F83D05C47774903AFB94
+:1057D0006A0CFA0E84731DDF0BF0EFD2FAA3C981B5
+:1057E00071B4AF325DE9F1D530F23B97835F87C387
+:1057F000EE56C3DE09F07E7793ACAF67A9FEFF2BB0
+:10580000C0F3D126FAF93D859D8B4F6FC138DFCEAD
+:10581000A5E23B670EF8EF6BECF328340FC60428C3
+:105820008F39E3F7F6ABFC59FCFB0B357D0368CFF2
+:1058300007AA385C2F060C8EF7418EC79E884C7CD9
+:10584000B46BB0DA8BFACE69373E92FDEE249ED768
+:1058500062D73717AA173BE4FE0477DF7524EFBE43
+:105860002993BC628CCB3B89C906FEAE464B80D3E4
+:10587000539590D71DAEC47ECC2BE878D6C7D61BE7
+:1058800029BA28126376B6CA197F3FED5040E1FB72
+:105890003F7CDFB9FD20F6FD4981870BED3F86593E
+:1058A000D09EEE8B6F1A7307CAF156EE3FF725DED6
+:1058B000A2BCA3A2D90BC9EF3972F052F2078AAA8F
+:1058C0004CDBEF6B668FE0B756E478CE1B0F1849C0
+:1058D0001EEF5BDD417EF6BEC1CCF7620A72785ED8
+:1058E0005A1FC84BFCBEC948F3EB399CFFFE292068
+:1058F000E86ECE3BF4BD8C343DFBB2D0B3A46F8BCD
+:10590000551653D2F21C2608FC39F52753E39E4B5B
+:105910006B88CE097FFBC4F9C543A64C78B7E81C59
+:10592000CF0F10AFB00E53D0219D6FF4B0B807F970
+:1059300026D6C4F33C9C704FF0CB17B5BE600EF773
+:1059400043CECD27FCF5897E0EF7CEDAFBE99E2308
+:10595000CC1742FA907EF01FA7E93ED4B32EFA3D51
+:10596000DB19CFBA1218D3BAF320FFBD45F9452F82
+:10597000C1F9CF87F9F7D5137E6E8FFD5AE7BF5770
+:10598000F455F760F717A03EF4ACC2C89E8C83E2D2
+:10599000027A3D2DE8953DC7EB2BBDBC7AE7C1FEF1
+:1059A0006538DEAAE7781EE69DCFDF76E317A07E96
+:1059B000DB808BEE0CDCF9F87A6D0CD46F8F4B7DAD
+:1059C00058FFCD7446BFF719CBD328CEF59BC060E6
+:1059D000C102C0F707EB3CCCB80CE3A48305F3018C
+:1059E0000F77C49F9E89FDEE784A0A23DBCE78F6B6
+:1059F000F15746035C777E43A2FCAFAF1CC9B6D912
+:105A000085A76129D3E0FD9A83FC77236F633D333B
+:105A1000111F773EDE4BBF7F68E1F3837595CC485D
+:105A2000FBDDB03BBFF134FD9EE15DDF92E8F71591
+:105A3000EF92F93DA27F7EDEBBE8311FAE6FBD76EF
+:105A4000A91FD7B559C376B7C55BBE8B294D77C49F
+:105A50000F6A33E1FD1D070E6A2BD12F73B366D495
+:105A60003F5F3972854DEE9CDEA7907FB026D7430D
+:105A7000F7EB99CF0CCD9B307C9F3F58C76C70DD06
+:105A800061C509D4B83637ADBD4BE7FEEF578E2858
+:105A9000B6792C3B20768CEB85D8DFFA297E6EED2B
+:105AA000DF1AE1775BFBB7C60AC4AB439333C1D3BC
+:105AB0008DFB01F0F4ACD3A9DCB92E44E5EE7506FC
+:105AC000EDD35EC423945D02EEC054568FDFE70F22
+:105AD000983CED38AFC9ACC7BB6579115E2F581241
+:105AE000253F64243BC62AF7BAA22DE84376EEE8A8
+:105AF0009FA582DDB3578BDE8D912FBDE3D5590D68
+:105B000050FF9B9CC8C61C92376103F9CEF2CFBFF1
+:105B10009EC3E5EEA6D11AE17BEFD2C98F2996FF8D
+:105B20008571BFA52B9F407B02FA6FCF21BE0DD39D
+:105B300077BA46EA5FB0ACCED6BF60D92AABFF1EBB
+:105B4000EAEF397FFFBDCBAEB1CFBFEC0EABFF2389
+:105B500004BFEFFCF017344FB5CFDFBC9AFA7FD506
+:105B6000CDF77728D743F9F41DDE70C245FE33A385
+:105B7000EF73A879971EA2EF279D8B330D9AA86724
+:105B80007D4FE556A31C4BD1D1F46FE23AFCC05DCA
+:105B9000E97494539765E3AB5C33CF56CF9F3DC612
+:105BA000D67E54A4CCF6BE70D1E50EBAF4E99407C3
+:105BB000CBB83E3531CE09706A63F8F79AEAC778F8
+:105BC000687DF7BFE8A5FAFDD7F0F5DD3FC6477C55
+:105BD0004CBA0BF6FD7E2D7A65BA7D0CEB9230E463
+:105BE000F58C1E1DC8A94D7F6EC8F83C4BE1BF6304
+:105BF00097E5E6FA7273E9E4C76269F8DC520CF4DF
+:105C000000F5B773345B9C6773F1CA504BDA3C9B69
+:105C10008AB54587AAF8F35BD08ED7237F87F37DBB
+:105C2000551BBA14ED57E73CEEB23ADB3C9E925559
+:105C3000344FD2318FBB6495631ECFA243E2B99833
+:105C4000E714D2C948F36C2EBBC6BE9E923B689E39
+:105C50005FE33CB569EB29B9C3314F165F0F3C17C1
+:105C6000F3FCE6BCEB299F6A5FCFD8D534CFBF3BAE
+:105C7000E6718F5DED98C747F3E0739C8715713F20
+:105C80004A730FADA4FDFF8197611C487347FF9ACB
+:105C90002EA9FCBD97E2C2D0CAC476FF07FE2263DC
+:105CA00096008000000000001F8B0800000000002C
+:105CB000000BE57D09785445B670DDBE4B7727DDD6
+:105CC0009DCEBE10C20D288B86D88190015CA6594E
+:105CD000E4A122065770810E4BF6A4A3E23C1C758A
+:105CE000D2104554D446518306A6C1A0E0800626B2
+:105CF0006880800DA883332E719EE3320B368804B2
+:105D000021260DA2E29BC5BFCEA9BAE97B3B1D604F
+:105D1000DECCFFBF79EF8FDF4C51B7EAD6AD3AFB4F
+:105D20003975AA9A0C4F22641C21FB12683986909F
+:105D30006FE33C17396D84FC007F3F26F4CF474862
+:105D40002A2FD3085940F85F60A9408A08A9B5B046
+:105D5000EAFC4D33721643D93629A3A490FE63A5FD
+:105D6000DD75BE4A4877DB24655E5E643CAD5CE071
+:105D7000978F8486B3777F2091EFF82692E175F4B0
+:105D8000FB65094E9C8F563F524FEB66420ED51372
+:105D90002C3B6532A7983E3F5C4F27304C3FDFC518
+:105DA000F8DE1189FE3385964D42C027D075ADF8D7
+:105DB000402643F0331F0EA7EBB8912F63813F9E1F
+:105DC000104B641E5E3371C37BE1EDE6C03A019E69
+:105DD000BA07983268D1984C8836DFC184FC69F7DD
+:105DE000D56F090EAC0E308D25E4E6655BDE846E62
+:105DF0001F092503EFA0EB9DD9BA421E40EBDD72CF
+:105E000068B6CBA61B67A67C08D66DA1FFC138B3C8
+:105E10003CB4AEFBFE2DE5C6FA6D448AD47309B9D5
+:105E2000D03998E3837F570DC880AF1BE99A322998
+:105E30000A6F837214343B115FB39DEC5D6D3EDEDF
+:105E40007B641284F948A15492072DA9D8CF03FD91
+:105E5000D4BEF39B2D5BDCC5149FB3EF16118ED11E
+:105E6000F30DED8E779BF269D9F8B54C069F7DFE58
+:105E7000731619DB898F7D4F83AB460737CD9CF0B6
+:105E8000E4611D7DCCF25CF1E461039C6618EAB725
+:105E9000D5CD32F49FB3A8C4D05EE2AB30B4CF5BB3
+:105EA00076BBA1BEC07FB7A17F59E362437B45E0CB
+:105EB00021437BD58615867A4DCB2A437F6FDB5AEB
+:105EC00043BB69F7886B088563C3EF4462A670FC27
+:105ED000C676E4B18B53A0945C00F7A3F51948D7BC
+:105EE000C7EA552C6B81F6C601FF8CB678289EBC9C
+:105EF00071E1529248C87DFE4B962DBB84D615DACF
+:105F00003E9E52BB7FE2325F3621CB9C2AD2BDD867
+:105F1000A8902025558124F5D27558D4B587CED2C6
+:105F2000DE2891E0E8BEED6228F6F31E213C348BBA
+:105F3000AEC3F7A999AC17FAF279842FC90092D1B0
+:105F40007F7B978994B7E8E4CE7AA709E793EA9C28
+:105F5000B8DE49E9A15A61FC5EBD35732271403D4E
+:105F600038B4CE7686EFB5D0C9A4C3388C5F2A0288
+:105F70000322FC8BF81B62E0FB61099E6627FD5E35
+:105F8000D71E7126CC8304F7E55C3712BEEF5E0F97
+:105F9000CF491B1D2493F277BDFBC9C3E713F24918
+:105FA000FD542C7F5F5FFCE46199903FD6CFC4FA2B
+:105FB000817A0F96A1FA722C0FD5D761FBE1FA45D1
+:105FC000583F52EFC3F268FD322C8FD5FBB1BDAB09
+:105FD000BE11EBDDF5012C353EA0F2684E31F069C3
+:105FE00071B109F8F40E2BE17FAC7E92AF41A4FFB2
+:105FF000EE40BE7665005F9FB47D3B348BD2DBC93B
+:106000004F2831E5F60FA768BAEB1F7F6E13E0AF9C
+:1060100034408927B96FBB358EE1C76A2253099591
+:106020003F0F9DAF10897E3FEEF50BD789B9F85C25
+:1060300002D2A18AC335C31E63FCF308E2EB6C787D
+:10604000D2FA1F79F6CF4573F3003F83914EE2F603
+:1060500089750C6FCFBB006F67839FC4F92B1A8EB5
+:10606000C2EB7FCA09D1FE5FA56AF0ECC821B4BCBF
+:10607000CE597C14E8E064AB19D775B23D3E406060
+:106080000C670AD245FF7063F3A8DA60F5EBE543CD
+:106090004D4BA2DF282F32FD7A797172FFF30EE0AB
+:1060A000FB3B3244FFE1D1401F6E4E1F8CEEB4F13A
+:1060B0006B5A72FD36C338C6FA49BF30B505E5BC28
+:1060C0009A70FDC8FEE779478682DF39B6614802DB
+:1060D0007CF758BDC50FDFE9AA77FAD97733FC7A88
+:1060E000BAAC5E14EF3F9C1C995F7FE3FEB3E747B9
+:1060F000482BF9DC4210F43F0CE9BF7FBFF8904E0B
+:1061000029C5401FEDF2B7A077E2866B7A47C2BA85
+:1061100036AEB745F4992F82E79B0CDFA3EFA94772
+:10612000343C0D3E13DE2572445B27959323A9EC86
+:10613000063AA5C48C78F6D01113E8783D926D9993
+:1061400040BF634E54B1DD0B1FA2F4546309291EF6
+:1061500015C1DD0176D6DCB11ADFAB37FD8192DCEB
+:1061600097BF91C9C3D0FE173A3A6D9779EB7C522D
+:10617000EC20F47B735BABA6819CFCF2D5ABB89DA5
+:10618000E22F82757F454C53814FBE22BF758CD65E
+:10619000D965D3131536BF654C3FFBE87FB03E6A27
+:1061A000A719F47559A3B15E4AAE4D037E285D2947
+:1061B00093009D7B05E87B6DDD94EF2F4B64765C4F
+:1061C00019A95B0A76CAC3329909F89EEB24D2005A
+:1061D0002A276A5E5B5D5442EB37249A90AE8E515B
+:1061E000FB4EA572A82289D931952901C54DDB3F07
+:1061F0006F1D7DE3C504DE0F2C05B9E6B313D77A16
+:10620000D217EEF39619E777B6F947CF979025386E
+:106210005F6D1EDAB8DA3CC40D823B10C39E9D97B9
+:106220002844EC645ADE9968B45F17415D67DFDE8D
+:1062300017555F1255D7E844E674624EF42C4A4C69
+:1062400005BA084F413B8D50FAC88BF45322FDEE3E
+:106250003B533F33F413B1DF9233F5B346C67B3083
+:1062600056BF9AD736BFEAA3F454F9CA530E42E593
+:10627000F997923FCD459F57AF7FC001703A2AF9F9
+:106280001C80EF2F03E2D458F0DADD0B2FB74D005E
+:106290003F02499BC2FDA547A6839DF4ED7AD9290B
+:1062A000D22EDE0DE6A099D26F6D6BC534928FF5BC
+:1062B00083ACFEE00911EA6D467C56BEF8549A6A3A
+:1062C000473C307B9B04D1EEA86DFE620AC8712F5B
+:1062D00009231D46BF07DF3F9D847C5FA224F46D28
+:1062E000A7F3443BD9CBF9CCDBFAC809D101E515BA
+:1062F0009DC067DE283A2AEFD52F21A598CEE795D5
+:10630000447BCA910B69F547E447200F34B89000ED
+:10631000B32B1A363E937F90CEABABF9370E214F9D
+:106320002F47183D9E6C99F7F31D6AFFF2A69BFB61
+:106330004591F702F89EDAC6EC20D2CECA6A39E857
+:1063400000BBB37AADECA2944AAA373FFFC2B3E0D8
+:10635000AF7D6A467FAD6AF39B1F8DA7F5AA2D72AC
+:10636000CA34B61C9B9016C18F97FE6FD1A8083E09
+:106370002A7FF9A6A28E64CFEF4D8AE0A56ACB1ED4
+:10638000858CEC0BC7492D7B94902D067E5A0E4EC2
+:1063900001BBA561E3770AF85F5FEE16487A6EDF0E
+:1063A000F7CBD7BE897A11E084F8E4F8EAC55F1F1D
+:1063B000BC05A7EF28C47E4E909767C39B9FCBE98F
+:1063C0009AD7EC2491CEA3FCF7E6C034C0E7CB7794
+:1063D0003A603D9D521DA3F3D50FA4B9E9F7CB65F3
+:1063E0005F9A134BF6BC7CCD5D487F65425D9A1386
+:1063F000F9C99D6942D9EDCB84752E68BA01D75988
+:106400004A3C4887E5ABC5E2002DBF91C8D42D3189
+:10641000F8A42889F149E73A8A5CBACE4EB0FBC1AC
+:10642000DEFEAD18588FFEE9ED04E4FF5D7CCD542F
+:106430005362FD1B0BC3972DC9A4F98B1603FD36C0
+:106440003FD801783A36D09D0EF3A470F071B809A8
+:106450003FD071C50F2E4F677822AA54C4DFA3FA2C
+:1064600060123C87FE1DB2DB9A6F788FCB4FF6FD32
+:1064700085FCFB74DE71A0DF3AD3A87D1F637D73BA
+:10648000617DA817A99ED3D1998EDF19FF373FC42C
+:10649000F85DE3FFC08CA9D07EEA43C647F01EE852
+:1064A000133AAF603AB6EFB95E40F96026C1587C46
+:1064B000DE2C733E37B67B29BF429C40A3133A7F44
+:1064C0004948D0D30BFD4E12E201FD95D295F47DE3
+:1064D000BD7D03DFC57E4AE4B94EAF9471B95090DB
+:1064E00044E5417C441E90A6D473B223AB65E2031D
+:1064F00093B3FA5333FAE3D59BE56258FFF14DFBB2
+:106500003EBA99D2F9F1168D6F8D72359A6FCBB76D
+:10651000AE17804EA3F9F67839D5E2B1F8963E8FE2
+:10652000C9B7E5A1FFA7725583DFAC24A33CA5F250
+:1065300071109810FDC1315A3E7E03F6566A5FF91C
+:1065400048FF3E24457DE950A33F8DEEA80537085E
+:10655000E47A2F7D6AF4D74B9F1AFD45AFD708BF69
+:10656000E8F6C1E023513A29DE4E2D3A8ACFEA7689
+:106570002160463EF7BD35A010E1E446F546FC6FCC
+:106580000D48D1D70351F596A8FEEEA87A71547F35
+:106590004F54BDCED0BFBA6D9F4210FF41433FF371
+:1065A000A2E7C8E731FC414DFF785B4F283EA08B46
+:1065B000ECB002724F5E424D3788AFED1231BED65D
+:1065C000A3861D49F4F90356E6A7F538793D91D520
+:1065D000C3A9CA52907BDAF3B095A07FDE531C7634
+:1065E00024EAFCFF83EDA243A5EDA10099AA8F2325
+:1065F00044E6D380F80E91FEDA59DCB027CE918FB5
+:10660000DF8BCB0900FD5D2EDA721681BFE7175DC7
+:10661000947CC8FCC5373908A5B39EF621D7CCA415
+:10662000CF17BC2D82B94DD1E3963229DDCCE3746E
+:106630007C94F89EBE84AE6F5E3BB3C3E72F8F4D54
+:10664000F795BC7FA96DA102F295DAD187F471D1DB
+:106650004AB21CE9AEBC29EA79FB55C81F9551FC2A
+:10666000E1E1FEC32E8D3F0A4801CA174298FFCBD5
+:10667000E5F2E562DE3533291E7AF68BC4AC823F43
+:106680002B92A5B0CE4D4200E205C4978A7C564BB2
+:10669000C2280F353875011F0DEB5F4E756DFB532A
+:1066A000D13D402FAFFE21FF395A76BDFAE9D09D8A
+:1066B000507FEDE39C3F90BEFD27EDFE7E36E8B3B4
+:1066C0009EDD668C8BF5ECFE55CE3D50DF61C6B885
+:1066D00058CF12B31BF8C0B7DB1E381FDA0732FFE2
+:1066E000A161D777F921D4AFF723DE8E2631FFE5FC
+:1066F00064FB9F0F082950D25581FDB03B1EF9C89D
+:10670000BBC38AFE7ACFAEEF8A3CB67FDE7A6A15CB
+:10671000E2417AB493995B817E1359FCD8BB73DC58
+:10672000F38BE9F76B5AF728F368FBA4D7FF9A0FAE
+:10673000F2B3672BB38BBAE5D01AE222E4EBA4B232
+:10674000876488F301336511F278F2862B7C79B186
+:10675000E0C2E0D043E100EBA2702907B9DF1F3CA3
+:10676000E29215A4F77F3D789C98CDE4DA8F08C4B7
+:1067700085227011DCECB93D601170FDECF9EEEF93
+:10678000F241EE1C6F598CF6CAD9D63D22F95F95BD
+:106790000EFEABEB1682E7B2EEA9FFB2F866F4FF8D
+:1067A0005E928AF38CE683BE74FEDA4FB0FEB2DDF1
+:1067B00085F33D47FE2FFFDF86F7AD14EF8EB3E381
+:1067C000FDC1FFB1787F9BE3DDEE34833CDBF55701
+:1067D0008CB36AEB3FDBBA5FF81FBA6ECD8EFF95C4
+:1067E00049FDB080F67F9BF83F1C4AE7D994BDEF86
+:1067F0008302DA3A5120C5B1EC938F92991F385138
+:1068000030A1FF471205EEFF31BF6900B723062C08
+:106810002C457B6340F6A3683710495D09FB77BFC1
+:10682000CA99E77A187B8CFAC40375E7A5BC6EF4A5
+:106830001F9F13885BA036E8809CABF683FD9A9D72
+:106840002DA27D4B4BB46BDF704C65CFAB1583DF56
+:106850007405D1D5E9BAA6A418FDA2C97CBCCBC9E0
+:10686000E00F0BE8FC2FB7C8CE0005D115133C1282
+:10687000ACE78A4C81F875FB4793A3FCA7ADD4C65F
+:10688000D4C7D7FE5EF85952989F395118BCB21838
+:10689000E03750C4F8E159E107C61EC2AB20F03022
+:1068A000D845928BC12FA9C685F157EE57C37633D1
+:1068B000D82B926D6907F0AD44A85FCCE68FFEB48B
+:1068C000E617F70767C2FD6C897F5283BB942DBA28
+:1068D000ADC6F1101E1A3EFE5E3C68F8FB47F1F1B2
+:1068E0007BC0C798083EB24F3925E0CF49DC1F98DE
+:1068F0007CAA43C47AB64BC2FD17EE0F4CB0254AB2
+:10690000E00F5C2A7D20025F9659B657C23E82C5D1
+:1069100025205D0FEB32A1BF63291410EEC31B25A8
+:10692000AC7F60728E01437BFAC5AF1DBF9B403CBC
+:10693000D9AD30C3BB98C5F3FFF2C30F9714415CC8
+:1069400085FD95D1FF5D4DFDB1F94D241847E1B4AA
+:1069500040223E487158401775C8100F36D6E1EFF7
+:10696000B2B4C83867EBDF9F1CF96797AF51B975B0
+:10697000E87C42B643C982FD92DE6FFE513B8397AD
+:10698000F71D12188CF106B758ACDB67FBF714261D
+:106990003F5EFBE3D6D1103F9BD09397C0E469A143
+:1069A00009E8D2CBFD8293444D807C8593ED431260
+:1069B000701F71BF68F7C488DB6CE4FEF42FEA3106
+:1069C000A84C7A9A895F04BF8984317EEB6BB6C488
+:1069D000DC0F9E9B62E274C3F146FFC422D8B7600D
+:1069E000DF5F405F4DD0E3AD6BDA97527E5F3CC016
+:1069F000DF21DDFECA3F0A5FF0DF01BE1BADA1292A
+:106A0000C531E4C7420EBFE97BBFC778E705ED6B30
+:106A10004D40BF17349B0CFB93D529DCEF1A45463C
+:106A2000C1BCA6EFB5DA0B012FFB459795AECFDBC6
+:106A30007E42F1C4D8E78A86278C0F71F49752D82A
+:106A4000BEC04EB9651EC075E75716E2A3F8DDAEAD
+:106A5000F8AB62CD33258DC9B905A4E5CEFCDC7F4A
+:106A60003DF84EE8B10527829FD94C785C239AFE09
+:106A700008D2F1C90D2400FA14FC52900B273711EB
+:106A8000D4E714248F825F4DF9FDC7FA38CDB0B634
+:106A90002DBF003BA0B65D709A687BAD1452201EDE
+:106AA000EB6D4B1441EF16A8C48DFBC39273E4F554
+:106AB0003ABE78294542F8EE1BBFF316F8EED75DD3
+:106AC0000A017BC4FD46D8017AFBEBF6D1C807FD6D
+:106AD000ADEB97F5A472B20CE33079184D0F799BAA
+:106AE000E20CF58B454F16F0D7747368A12B06FEA8
+:106AF000A6A5323A3B67F916F8FF4CBE7DA8C93708
+:106B00008F58ACE3A3945446F73AF9961E4BBEDD7A
+:106B100021A8E900F73B760D4907BCDEF1B69C1AC7
+:106B20004BBE6DAE67FB7FAF507E84B2A795CAB7F0
+:106B30008B74F2AD95CAB7DCBEEFFDED5CE55BE0B2
+:106B4000BF87FF36837C8BB1DE440E3F4DBEE5B779
+:106B50001F44F996DF6A22AACE7EB0A49E4DBE09DC
+:106B6000A9D7833DBC5F76C5C7A09FCDDCFE7E85DF
+:106B7000E7EDC17740CEFD5B2ADB2F3D5739979972
+:106B8000C6F8E4AC72EEBF09CE9A9CBB631B95734A
+:106B9000B9B1E890C9B93BB6533927003D323977CE
+:106BA000C72EC2E26F51F26D781FF946B07F6D902B
+:106BB000BDEF6DCB7DE6563ADE28B7ECB2D0FEA332
+:106BC00022F26E8C5EDEFD5BAA8470EE23EFF69FF0
+:106BD0009BBCDBC6E51D95638341BE46D387AB3DB9
+:106BE000CE50DF39AE73D32F815FDE15717FF10395
+:106BF00013DB077A6F5C6721D0D72A3E1F2FA7BF10
+:106C0000EE7A1F8E3FE90DB6BE9A4D2CFE5DDBCAB3
+:106C1000ECC3DA6631A0D27F4E19FFBD02F3AFD8C4
+:106C20002590745A9F61F63F6D0319FCA24CB85F22
+:106C300034AD40470FF3C756611CBFC1EA5847281F
+:106C40001FCF978805E2F555B6295F821D5C359602
+:106C5000C5F7ABF873C2F306B43CC8D2B6DBDF1A93
+:106C600040FAE60F4C37333C4E7F5E08ACCD85FCD6
+:106C700025637B5554FEE3637C9D33C410C285BC01
+:106C80002FC6CC63782C1A1EFB393CE8FA0DF008AD
+:106C90000831E141313AAD202DB2FE8A77434B21D4
+:106CA0009E5FB14AC07D5F0D1ED1EBD4E0A3C5A7A6
+:106CB000ABF8FBDEF6DB71DF3F7AFD1AFCFAAC5B6A
+:106CC0008367D4FAFDA97CDFAB808C867C1A4A0FDF
+:106CD000283F7CBFA670A0DF299E707EBA5E1E3F53
+:106CE000CDE130DA3F61522601B8913AA09FD2C679
+:106CF000DBDFCAA4EB1FF3893A0AD4E4C5E3CD1E57
+:106D0000D847DD680DA37CD3E8AB53A3773ECECE46
+:106D1000ACBA89E8AFB7094EB02FBC412BC2D14BFA
+:106D2000E9CC4ABBEC5BF5ED140E47A719F98AEBE9
+:106D30001D0A7713F8539A1EA27007BE19DD7E0252
+:106D4000F7730B4918F74B6A1B055790AEA3B68D26
+:106D5000C14B93B7F4CFA6C7470C7A9462D1238175
+:106D6000207151440F56F17ED3CDFE8F601F663ADD
+:106D7000A5F7B52482C7E1F43FC063349E34789E02
+:106D80008D3EBFE0F6C76680A30DE0156676549091
+:106D9000EA057BA4DD2BF90C709CF4EC69465FBB23
+:106DA0000415F6137AE104F44ADBC7B4337A05B864
+:106DB000A900F7F61211EAA514BEC9B97DD709FBDF
+:106DC000977AFEADD875908DBF5A709118F4ABAD1F
+:106DD000BB3FFAFD47E9B6338A6EDFB386DF190D94
+:106DE00074BB4B607184F644C3BEA3398DEDBB6F99
+:106DF000B452FA86FDAEB765D73AB52F9F9FE6F03D
+:106E000004FB5FD5C5A546C002602F708305F3CF94
+:106E1000701E83997DA997AF9BAD24F5FAC2FEC77A
+:106E200057B83FD09F7DA3D547C2F740EEB5D1EF0D
+:106E30000D8F7C2F5ABE6BFEFED9D6959CF68FAD7A
+:106E4000AB377F9374E0FE9339D1734F0AC67F58F6
+:106E50007ED28D3C3F89CE00ED2C5DBF8CD431FDC0
+:106E6000F7231916D4C377F2BCF8CB451BF1D175C3
+:106E70007CED96914EA996FEDD25209727523D4246
+:106E80008BAFDF19F3F1ADD82EE27ED435EF26D7E4
+:106E9000C03EDD35208CE8F36B0A04D4BF1FC06010
+:106EA000E3C08EB510B79993306D1FFBA3C4C0C368
+:106EB000B4BDA0D93F49A5FC346A43A0014AD7A478
+:106EC00070CA7B00BF092201F875B8932781FEBA0A
+:106ED000F30B5220AAA867719C51FB492AF41BEFBF
+:106EE0004E4577605CEBCA49101F9DB1CF66033AEF
+:106EF0001FDE64221E1DFD8E278106D8871F77D8CE
+:106F00007D1DF05F39B51720EE5CDEBEB6C101F520
+:106F100026C1A5D2F1BD3ECF14079DD7E6C61353B7
+:106F20002E043EA4FD60186F13EBE76D165C902AEB
+:106F30005BDABE02F3714A9B05E284FE018158D8F8
+:106F4000B8010B1D7773137D9FD6CBE07D18B7F981
+:106F5000C487D7019FBF23B2F737B17DEB52FA9EAA
+:106F60000AF4DA7C3B8E57D124900C3A5EF926263F
+:106F7000FFCBDF915DD0DEBA6715EAB169F47B998A
+:106F8000B920EF8393A14E460B4EB0B749F6CDC85A
+:106F9000D73D9CAF49D74C2637045EE77E836637E2
+:106FA000ED4D63F9C1A5AEC54A321DE7BDB1A9B922
+:106FB0009026E06D3B81FBD187299C3D14CE1FF0CC
+:106FC0007C8E7D633F57423AFDF359DA10A4C3F932
+:106FD0006D1330CF610129C63C87E9E398BDF6FE09
+:106FE000A5D68040E7F5BE1CCE86E7FB2E35A3FD77
+:106FF000DBBD59C6FDE2EE81218C4F7736C904F224
+:10700000351A9A44948B9D9B981E1757DF30251391
+:10701000E0B75E7081DCDCD7344901BDD61910F0D1
+:10702000FD49ABEF4A637E0C93879ADF56EAAC309A
+:10703000E88F68F9A6C9BF1A0E87683957A3E9997E
+:1070400028395703FBCD0E288DCFBDC4C6E41FD809
+:10705000FD80F7E0F748BFB5EFC804EC7EE1F3AE82
+:107060002998B7057A93B68F6B17DCB0CF5FFE898E
+:107070003980F66AA064CE4F417E7F6A26820A7903
+:10708000F014EE542E8C3587FFF8247DFEE50716AC
+:10709000C890A174528270D6F2450BD7B3FC96C249
+:1070A0000F56A695021C2627A39C2D6B14894727F3
+:1070B0002FBE14DCD7DDCCE4B173BD4E1E152AFE05
+:1070C00052D05FCE742607D5F532E48C906D5C3ECD
+:1070D000517BDA0D7643C5F615690AEDB794E7835F
+:1070E00054EC5A914645036900BD45FB57286CFC9A
+:1070F0008ADD8273AD6E7CED7D6D3C6D1C65BB7170
+:107100009C21BB78FD1CC7D1E6A17DBF3F7B7CECF9
+:107110007F9C5E29D0F1C6BE2F6292F2D8CFA70D18
+:10712000D1EF7768A5167F2DFAD044DC3AB88DFDF3
+:10713000631C71EBE8A2750CE56F8AB7ABDB983D79
+:10714000D43AE6A05253887527F0732D8FD3D64ECC
+:1071500066FB56AD051FDC0FFC3DAD50403A203EAE
+:107160008F929C8276900AF1F1B242F67E197D1FD1
+:10717000F8AE7515E3432A0F549017B54D2BA66052
+:10718000FF664185F15BD796A09E2F1F2B126C6F77
+:107190003E88764779DBC114E057CA9F2B41EFD672
+:1071A0005E6276027F687CA7F1F1FB32CB0F21167D
+:1071B000E74838075096A6C6E45FF11DC2FCD44DDF
+:1071C00032F29D772CE3CBF7378BC8CFFB2EBD690E
+:1071D0000AF061F77AA11F3EA67C5A18E153713577
+:1071E000CBD729DBC8FC957D4D4C3E74B6323B7144
+:1071F000D26AF96AA897BD2B1316F762F6E0B9F2C6
+:10720000731F3B65436C7EEE8F7FA7CB2D1FDD493F
+:10721000E777CDCB74FE6A045E932EBBDB8171FAF7
+:10722000CB66E17A3539542AB17CA6F9FEC52CDF4C
+:107230005762796F7FF7BCA2E6F1609A3D2247441E
+:10724000A0F7449627DD2C23BD47F3E33FCA47FF51
+:107250002CBEDEC6E9489B8FB88BBD0F7965410A0D
+:10726000C75F6D7A1EF35ABF7AE9E074C073D54EDA
+:107270004ABF74BDDD9BEC2408724B0AA0BEA96C0A
+:1072800015317F9C48C1A2EBEC7AFE64F94955AFF9
+:10729000D8916E2AB7B2BCD3CA573FCFC77C9125CD
+:1072A00061CCBBF2BDC4ED4D5F281FE8BB526279D3
+:1072B00052D1FC3E219DD99F5DDBE367C23A840D2C
+:1072C0007B70BFB5B2E52619E8AF577EA4CB5A3F15
+:1072D000DCC7F451FA857D7698DF8C91FAF92D465A
+:1072E0003C756D64FC5FD92607AC30BF0D6B319ED9
+:1072F000EDDD7002F3E327BDB219E308DE36D19865
+:1073000017B9410C9A317F533C6846BFC6989F58C5
+:10731000DB5A83FB6EB52D3CFF2F2A2FAEEA955D1D
+:10732000AFFA2868AA7EF9A203E4C1B18EF50E80F7
+:10733000271D0FF30A2F3B2519F2A3FACF07761B5F
+:10734000F30D5B1EE2F986577792FCBEF986C7E023
+:107350001FA06FD2A3F2353724F3FCEE6051718C7D
+:10736000787EEFB99FCDDFAC813CF9AEADC7D7C019
+:10737000FCABFFF6F51AC86F22BBADA8A7BC2FFD6A
+:107380000EF38AB5F716A7337AEBDEF822E66577B7
+:107390007F6A467FA77B57670EE4B7756FF93E0D8E
+:1073A000E2730B775D8EF1CB85DB26A59318F25E39
+:1073B0002B813E03E790171E8D8F7DADFB300FEBC9
+:1073C000AB4FCC28DF7AF3475B6A585EAECAF34610
+:1073D00037C5CEC3D7F21C6B5BAFBBE65290D7ADBF
+:1073E000CCBEEBCD7B3C5BBEE88714AF179D03FEA4
+:1073F00036F1BCE096AB63E68B7E05FFA078FA79A8
+:10740000BA315FF49BD6053F7F16DA5A93FBCD174E
+:107410000D9E03DCB43CFFEA74F74BE9C0475BE325
+:107420007D190C6F816902D881DFE4C0F988A372ED
+:1074300018F340C2BBCC4EC87BACDCF531F24BF745
+:10744000B60F30DE4A789E7D37E9FD63F9D0025FE2
+:1074500067B39DE59972F8431EAAEAC0E73CDF9442
+:10746000D1B19687DA5FFE69289D9F1FE6E70E6A15
+:10747000A8DFC4F2D42379A9C258C0D741435EAF74
+:10748000B6EEE8F19C5C8E46F2AA63E7F96A79846D
+:107490007DF1C5F48A9637DDBD96E75BD3E7D9A3C6
+:1074A000204F8EE9736F40F838167EB5BCEA3F4432
+:1074B000E1575B5F7F7CA1F1E7D9E6FD5F85CBBB40
+:1074C000E92C9EADC1A7EB2FB1E5F4B79CDFA9DF96
+:1074D000FA4DBACEBF9DC3FD560D6EDA7C97B6301D
+:1074E000BBA26B03F31FA2F99BAEC71D2BCF5ECAD5
+:1074F00060F66F6DDB9E7C90435D7BB773BA6374FF
+:107500005DBBE920CBD3A5723BA097DB84C591A3DB
+:10751000C773F0F1BCEDB1C7F36E3A1173BC63925F
+:10752000FB2698FFB10E66471D6B11A706628C7F84
+:107530009AEBA5DE75DB15CC97121D71684F2DB443
+:107540008FFD2421054A05F37E1A16F33CA1FB5C4E
+:107550001900E706FB9504E6F300C047177F909DEE
+:107560001E02769C9C515C28AA91F96AED4A8A8990
+:1075700004F4F89782D920DF0F1474CA30DE675103
+:107580007193CF24B2349DCEEB339FE05AACF66FAB
+:10759000776B75CFBDA221CE516B0E1F00FB9DBC3A
+:1075A0006EC5B8B5B8DBEAC3B8D91A2BAE73DFB66F
+:1075B000EF5E007875FFDC4CD83E02250C2A17CA16
+:1075C00078FCA273DB776BFE0C7626BC4CBF5FB6F3
+:1075D00086F607FB7A533CFA033D5B13F2D19E7C9F
+:1075E000FD9EE92037CA4087819DF74A7AA0818EA7
+:1075F000772495D58F6C1E88E709AAB6DA31DF703B
+:10760000DFB6D76A41FE77BF120FDBD1E42B39F426
+:1076100037A87B772690B52ADA81AA5EDF56104913
+:10762000D5DB79555037E4BF10F4D3311E47E9B9A3
+:10763000AA2D01CF8FE8FA717EF665B1F332C12C25
+:10764000E03B6A4F1ABEA3B55F9F31989FEF0DFFD5
+:1076500084DDAFC0FA7B957029ABFBB318DF766091
+:10766000FF128D5E797BDF7159FF3919830DFDB4EF
+:10767000F76BCDA42E161F546708FC7CEF5F87C5FF
+:10768000BACF22C6FCF1F95D02F199C00ED8620DA5
+:10769000405CA35A090E85FCF65715B63F52ED081B
+:1076A0000E85FCF69D5CFE55C7D13A7D9EC5E7016F
+:1076B000FDA14E2CA19701DF35AF5909E427D5BCB8
+:1076C0006E77039E6B5EFDEEC8738590CF168F714B
+:1076D000AB9AD7FF1DF15F630ECE06FA0F6F3193A1
+:1076E00075B47FD796B773C08EE89283394967D84F
+:1076F000F7A969311BF6B1B5751CAB0F9C07E7D72D
+:10770000B5738B95FDC88B5D19CC1E5D91E17E3CF8
+:1077100003F9DAE644790DE389304EDB10FDB9E672
+:107720004A35B61C6BCA900DE768C5C839C526181E
+:10773000F72B125A9A455152238471FFBC72C389A8
+:1077400091E00F7FF6B30B715FEB33253C12E4F64B
+:107750006739E1917A797CB4DEA24A32C625B0EC71
+:10776000597BA2348B40FEA075662CF9B439231ED8
+:10777000E751796F7CCCF3A03B38BDAD061A4C6560
+:10778000DF853884F6DDCF948002F3C8CB54B1BDD9
+:10779000323BA0C0F3AA0DDB8718EE9D90FCD88F7A
+:1077A000F217C2A382AC540A6D7DE54AC5229B2A1A
+:1077B000E1F968E93F7BE94D8CE009839C90A7C61D
+:1077C00071483513C641B5F300925C6C017829A469
+:1077D000D82989806A3FF2691C69C1D246CD11A6B9
+:1077E00087EA08E4151DE5FBB766497D1CE4877947
+:1077F000BF88F2FC6C70FB558603E76D96EA880B38
+:10780000ED8E694EB0AB059F87FC40E9A1A17EC318
+:1078100090C36CFFDF0DF9700EC2E6E770BEF53D58
+:10782000D80794CED0CFF65D46020DF47B92C2EA23
+:10783000642209C4DA8FEFE27820BE3D287F6C24F1
+:10784000F217A6F5789450F4BB097F1B0B7EAECDE2
+:1078500049826037C5DB48309E96B63CE9989E7FEA
+:107860001D84D507537206B9E6BCC4D81E4DD7C4D3
+:10787000259DEA958B22BE7F2AEAFD53677A5F83B6
+:1078800087D73224979D7F677089E36BF04D749D95
+:107890000E013CF21DAE06C0A3123E700FC023DFE6
+:1078A000C6FCC49446A2F7E38664327975BFC0F47F
+:1078B00025FD2BB6E9C6234E0BC64F1FE270EFED38
+:1078C000AFC555FAF4B74A00D73EFDADFDF58F8B35
+:1078D000DDDFDEDF7CE263CF27B19FF17DB1FBD737
+:1078E000BEFEF17B41151E32B9211193760E7A4806
+:1078F00026F85B0907D24A1855B07D8228BCC5011D
+:10790000FD517A883B4FF71CFE2F4F87BFC131F0E6
+:107910004F824877257C3EB46ECBA4F3BB994F775A
+:107920007233DBC7BC75218B23DD7C2F3B2F74F0BA
+:1079300067ECDCFEAD8DCCDFBE7511DB3723E5ECEB
+:107940001C9093FE07DFBB0D06A1F8BECD2F04826D
+:10795000B9700F4E94FDDA7BDFCE5D12F42F898A69
+:10796000C768F4A49D5B9AC7EDEB5C4E9F0B48D8AB
+:107970000E7C1F7D8EBE3583E5A55177CC0DEBBB0C
+:1079800085AF4FD303BE156438DC0B209AE25CB0A0
+:107990003F22F273ABC4A1B0BCE5EB930CF2E7E479
+:1079A000703501F41D79833FE7F711DD71859AAEDB
+:1079B0003FE7259D8EC7FB471A645706C845F9F473
+:1079C0005544A57CA19C1E4254DD39346ADF21B3A5
+:1079D000CB4E82711CC9594CCAC02E4CE4749672AD
+:1079E00065AF1DF63E85CB1D2B543C077B5326D33C
+:1079F0002F0F67152F00BA101D635D1E5B5FBCFA69
+:107A0000B6B1F535C0FA72FBCEBB4171B9D00EBD2F
+:107A1000925A1018EF7159603EA259FD5805FEFCAC
+:107A20008D4CC0FFEF0B0786CF93294901C87F9982
+:107A3000EF78F800D0EDF27A27EEA32DAB1F8EE59C
+:107A4000C3F51968872EAD7761A9C1C5E2F2BB45C0
+:107A50000A67CB796C3C8BD3C3EC0CAA8720FF421E
+:107A600072D605A16EC9AE2360FF5A7BE1E347F8E9
+:107A700028BD750FD6CD50A7A5DC380DE14BDF270B
+:107A8000651047CDF22C07F858D50B88AAA30B73C5
+:107A9000C62843BD0FDC34FAD8CCE0F7A8C0E823F1
+:107AA0001A7E8FCA1D2AEC3F3F7A45EFBD36083F4C
+:107AB0006AEE33F8FD9AEDCFF50B3F6712DAB3F3B8
+:107AC0008B96CE6EA08F1EE1FB900FD68F45783D32
+:107AD00004795DC3C03F70632902FC281D99F37CC3
+:107AE00044A4EF9B553667B3ADD86D2A64B40BF050
+:107AF000136D0C9EE68C3ADC8FB3D818BC449B0FF8
+:107B0000E122DB18BC441BA33785D72580DF687CC6
+:107B10001F9F53F8B5668E013C8C37C04B4999784E
+:107B20006EF05B45E147E791C2F92B1A0E29704EC2
+:107B3000212FC257FDD9754FD1F5831E7F86C2070D
+:107B4000CAD47EFCC7D42C2647534C757B6480472F
+:107B500012E1FAC547B28B084B5584BF0C1F51A1E7
+:107B60002EB0799066235E45A71475EF9BFA0CD072
+:107B7000C1CAB76513EC938A8BAE329C271567BADE
+:107B8000135584A74700FDFC48BD8AF85B01781CAB
+:107B900006FA91F9630F707C3E087C82F865FCF16F
+:107BA00028E797C7399F34B8D8F989E553595E5605
+:107BB0004A8189DF871624FABCA744570B51E8BCD9
+:107BC000D0C656B10CA29DF18939703E7D2F3E8FF3
+:107BD000B8814E123FB93B806B25C599601725725D
+:107BE000FB975CA226CEC283B44189F9215414A22A
+:107BF0005FD3618A750F56836BAF05E2A6FDCD6733
+:107C0000CF8C57912E4B2FC2F46092EC299EB580F9
+:107C1000D66D8DF1181F8C77798A1E003E6FB423C4
+:107C20009DDAE8FCCB74788FEF07AFCF665D61CA51
+:107C3000A2742882D146F1FB44E3102BC0F929B984
+:107C40003813E4EB535CCF521CA8FA7DA82E2E27E4
+:107C50001D851718FCD995B21BDF735E6294032B48
+:107C6000B9DC4D9A6CA4774DEE7ED42B773DA930CC
+:107C70009FB4D393911F53AE8D2D7F1B64C507F71F
+:107C80000A348C64FCEE2B51D0FE8B210F30AE7D7C
+:107C9000D233741DC8538DBE9610267F7C24CE85AA
+:107CA000FA88DFA3A3D9C7CBE0BE412E67A114CFCA
+:107CB00053906ED26E35617EDE727E5FD66394BE67
+:107CC000A0F453FA82F2D22CB69FB1C4320AEF6DFF
+:107CD0006BB099505E489F9A0336B057F78C734249
+:107CE0001C41925D1D6E8807DAA5967504FA155A37
+:107CF000E03E0921B1D00974F0AD7DFEA033E5E18D
+:107D000051740A4047CE946272280F770FF05CB32B
+:107D1000ECBC96405CF199943A2BC02D2F8BF95D09
+:107D20008D254508470ADF8959A99171D2675ED927
+:107D30007BDF160CFB4C3FE7A3A767713B3ADB47A1
+:107D4000CED3F17BA3C0ED30D54786EBF87EC9F9E1
+:107D50005308EC2BF5E5F77EE4D97A26CFEE1762CF
+:107D6000CB33CDFED4E4991C2527B472E9A0A986B3
+:107D7000F35D4A8A0B68174A9F89A248F25DF4E8CE
+:107D80002D890887790007927165AF5FFBE3C160B9
+:107D90005716C5A4B7683936BF57AFBBD3004F4796
+:107DA00065357D16D0D3DBFDE9757729D2A17F80BB
+:107DB0000A7A69CF1357615CE7F0137615E450D95E
+:107DC000E987503F949E1E876579E315A8CF8527E4
+:107DD000AF2E027AE86CBA3CFF5388F3F8EDA8B7EF
+:107DE0003B1B270DC5FD487FBC0AF91D9D8DB4BD09
+:107DF00030D20EF9E2A22E5F8040F45D77FE9B1434
+:107E0000AA68976AF79E51BFCE311EE242AB453C4D
+:107E1000D754FAA4DD0DF6677FF457DA143B1E0041
+:107E2000BA16E2AEF483C3C18EDEE3181F0ED27120
+:107E3000E7AF63FB080D8AFB4810ECA627ACB80F30
+:107E4000D99014FB5E900559972F0739B020CBFDD0
+:107E500014E2C9C6EE29ED9F1FD8F78FC02633EC78
+:107E6000633DCBEF47913C8E19867D36B68F758486
+:107E7000C75988A59FF638DEAEF6D3EE60F922C466
+:107E800019BB5DF333E2237E460BACA3A6F1F8D217
+:107E90004F115EDCCFE0F33E2AB3791F7DC11C5841
+:107EA0001283FE8FF2FC940A81C157E383A3BDF6CF
+:107EB0009107EFC389A65361DD8867C6D171BFDE24
+:107EC0002FA3DEA8A6F48574B56E1CE6C70B4F8CF5
+:107ED0007B1CF2864FBD23627BE5692BB677DDE71D
+:107EE0007A06F29EC2EFCA04E4D3A9FD9727B03800
+:107EF00091318E7DDB0026170E71F9507AFA11A4AC
+:107F0000DF5E3AF12F5080FF4A4F3FC6E87B838007
+:107F1000F756125FF5BB13CEE3F4391EDEAFB87A25
+:107F200009C0FB123FEE9394AD37BBC01E88C6F369
+:107F3000A12CD510F7280B2DC77109B5BF5274FBC2
+:107F4000E947799E71D969765F2171FA4806F00395
+:107F5000974F113A36DE43DB658D1DA73FC9ED9F74
+:107F6000D2D3171BFC8CC8FA2EC3E7A55CFF9785FC
+:107F7000C6613DB29E67C6C55A4F641D9760FFAE8D
+:107F8000C4D8DFCFE4703E525F4EDC54BE952BACBC
+:107F90005FA9FF2E05E44E69536292A05B575963B7
+:107FA0009521CFA3ACA94499AB1B378287A5EF4E8F
+:107FB000902278C87C6EF1D54B6C601714CB03808F
+:107FC0009FD65514FD5485F1987CFA52F6E780BC93
+:107FD000EE6CBCD311EBDC44E68028FC3472FC5020
+:107FE000BBBA50871F0D2FD1EF1F595B56F4538832
+:107FF00047AF62B790F42F7FA2F0961B1B6EA37A57
+:10800000E1361CF38DCE0EB70B0D79457DE0C6F140
+:10801000ABC1457B4EEDA80B078C81EF11767EA797
+:1080200091E1FF6CF08A7C97E37F42EC75CCEC5DCC
+:10803000C722E2A38C3AFFACEBB887F82C675887CD
+:10804000867FF28201FF339F5B8B7CA8E17BFEDEA3
+:108050005548BFF3293FC27E7FA7FF2E47ACFCA245
+:1080600099FDE1FD3C1FC92BFABF87F72F655F0E15
+:10807000E495F95658D11F39BAEE911C3D9C17640E
+:108080004DB80DF0429A53CF497FF826BAF6837F58
+:10809000E97B42C678DA962C4F19BC5FCEFDF0FB27
+:1080A00013A70C8D651F3C50BF7F04C4E91AEA3B3F
+:1080B000B094B97D49C0BECC457BC91DEB7EAF6590
+:1080C00003985C79A0BE83C53D2D3EE2D49F272650
+:1080D000CC7EFA4FC2E235DA7B8AEC7142FC54E185
+:1080E000E79D65C9B32CB710E21E29053E1DFC961D
+:1080F0000E60E7919667EC75C2B962331D1FE239D5
+:10810000966CE9A4719F93D50B844F45C86F965325
+:108110005A08C643F3E8731DBC95940E437C3A1A83
+:108120000E92C581FB4D1261F69CB67EFA04F5D223
+:10813000835C2FADE471CDA7EB5B30EEBF24DE8115
+:10814000FA6FE92013F3A72C12DE57634E64FD95F6
+:1081500004366F2BC4BD45D0AB41ACDBE1461F11EB
+:10816000AF4613A09E485401EAC924B814EF4999B8
+:1081700010FA093C7765780280C76F333B0E081010
+:10818000C72EF60C03FDDB28FA0A54DAFFE762B8C3
+:1081900000FAE5D0A64F92583908F2A13DBA7D2DDC
+:1081A000764FA8AA8F0B46D7072D92A2F67BFE32F8
+:1081B0004CDFBE22C3FD0ACCA3C1CAEE194AF95C4A
+:1081C000C0FD9C062BBB6FA8C17E6302E8F15F0F68
+:1081D00060763BD201D0D17E66CF9C94D4842416A5
+:1081E0002755DF30C4F92DEA1BBAEF48DCDF6BA658
+:1081F0007429E9F655CE93DC26A09BF3FDF4B97EF5
+:108200009E31E2714936BC9637E67E8E363FC8DB3A
+:1082100007388AA7A7A0BF164D0F3B7BE3CC3E11C2
+:10822000F0394BBBBF58BA9FD51389F687FED7A745
+:10823000BDF6E8FDACCEF739BD73D93E66434902C1
+:10824000E6C769F398D5FE6007D8A9B3DA33E7C16A
+:10825000FED62CDBD02FA0DC2987F7C6831D7897AC
+:1082600080E74A6EFEDD1B723C2DB77DB80ECF3322
+:108270007FC1E5E96C12C67BE13DC4C9F7D903F8BB
+:108280007C2E71F17A8B0C7EFDADC1C00D57D3DA17
+:108290006D6F04AE06B36DF6FEF09B20063C2DCE4E
+:1082A00029B887A0BDD7E67A8BD5D97BBDEB972CB3
+:1082B000B89EC87A2DB87E6D7D74A608FF5EF8F072
+:1082C000FB9A34788873E9BA29BDCC4AB8F14A726E
+:1082D00006BB7C966DF8176CD384CD271A3EA7A0F9
+:1082E00089DA8F5D03DC249BE2EF0F03DC0294D577
+:1082F00096708E3418F944867AADE81904A9CF5FD8
+:108300000DF40C4B053874249F93FC3C6065FC7F96
+:1083100000E819F2BC4EA7E0BAB47BE8F7DDDD69EE
+:1083200007BB73E9B68FF19EE51A31F4E84D180FDB
+:1083300015D16F3AD93AEC8CE7CF0E409C8AEABF50
+:1083400081D9DA394BB6CE3912E39339ADF1988F32
+:108350003F679168B8477ACE2296CF47A48EFCEB50
+:108360000DF6FAFDFD8E03F182E871E62D9A443E8A
+:108370001F0DFBB4CE09183F58C3E86BDE64B70885
+:10838000F9CEE39709B8DF3AEEB0DA16A2F57981B3
+:108390004417B0E7BCBBFF6308DC7350DBC1E2816C
+:1083A000E9E2ED05F7419C652FD3E350BF1DE8C41A
+:1083B000E6566DBAFD822EB9AE00EEFBF3DD6673B4
+:1083C00003FF975CEFFE14EFF3E5F10A4DAFBED665
+:1083D000588279B225B7AA6301FF252D5637961624
+:1083E00022C551395622110B94E90A91AC50C6119D
+:1083F0000B94454BD8BDDDA58D33D03E708C2D56EA
+:10840000E03EDE92F617BF81F7CBA4E01E763F0573
+:10841000834F49FBDBDF035E17B88B319FF1C20D41
+:108420008AC10F1CD962AC5FD466AC17048DF5D13C
+:10843000FB8DF5F5D904E968AEE5BA3C80D7DE5D81
+:1084400066AA8B20FFCF8CF92E8704861FDF462B70
+:10845000CAC34955ED45E0071F7FD96E023F7AE751
+:108460005F7F89FBE1E1CDF104F2ACF6FC3E8EC406
+:1084700041BEE22BD675D05E457107F1CBAA57AC51
+:108480006BC10F7FF502CD8F0FE4C37A5EFD1BCB6E
+:10849000AF096F3407607FFCF8F6175F86FDB4E321
+:1084A0001B07A07D7548F099E2E0FB5FB2F8678892
+:1084B000DF1717E2F7C5556D30FAC5776433391306
+:1084C0005A7271422CBB492B876724E74DA673EB88
+:1084D00079C83C07E240C31A8D70D1FA8D08189F05
+:1084E000DFC3C71F4F94089DE6429E40A0C101FA1A
+:1084F000F7F9D8F7242FE1FCF3D24BBDEF89FC9EAE
+:1085000038A2EACE4D45E437593800F23700FE83F1
+:1085100023CFAB886E3E3AFB642A1FFF6B0BCB6701
+:108520004EE1F7F71FABDF8F7ABFD7EEAB77BB27F4
+:10853000EBEAA58D7BD24AC07F6ADA93365707AF44
+:10854000EA8DFBD26EC1BC270922B8A47AD60B8F64
+:1085500041BCA27AA3D802F38476805B57CB9B0EF2
+:10856000E847EDE151100789D8A397BB27EBF8F84E
+:10857000EFA55B8DDFAAB9FDF2DAD88E2990A75E50
+:10858000D528B8A05B55CB0DD75D0DF06E62E75CCA
+:108590008B24522C52FEAADE72C35523216F66F53E
+:1085A0001817CC870E713D3CAFDA7402CF333C1CF8
+:1085B000F5BB075AB9239BD985B47FD044FB3F7CD8
+:1085C000A3AD1CE4171DF70DA8EF1DBE0EEF5771EC
+:1085D0001C65FB0FF4F927266AB71C9DE87BEF1694
+:1085E000FAEA71D2F2D1D510576A34D223A56F01BD
+:1085F000ECB2F07AC1B50E9F2E29BA164C6EF76216
+:10860000CCF7A5ED73629DB7AE0818C789C6FB47C6
+:108610007CBEF46FB89E7EA2FB254FF3613E79F5D8
+:10862000222A0F757182EAC37EBC5F32FA3B444F47
+:10863000D7CC9E202AC8C3CD2C6F86FE0996229ED9
+:10864000A73B84D5F15E45A0534A28551790C92A07
+:10865000C0FB5A3215CAF12057E03EFDB12DF9D0CA
+:108660007F87107AE1391CCF8E72BCCB19C47B2670
+:10867000B3F839D32E95D57B789C536BAF6CB7622A
+:108680009ECDF1AF1494B38B5BF6611E7DD7CB56B4
+:108690009389CA83E35B9227423E66570BBBA7F8D8
+:1086A000584BF244E50C7A3B5A6E68FAF420FC937E
+:1086B000EADD3F67BBBFCD063D753FCB574D4FAEA3
+:1086C0002B88F5FB17DA7B294A5D01F831E1DB6C79
+:1086D000AE7508275FAE8471F00C17E40995086C3D
+:1086E000DCB841C5E240DADF4EFB423C3A69BF8864
+:1086F000BFD7F0B9E8FA897308DE278F76D0FC423D
+:108700000FDE4F49EE677995F324129428BDCD030F
+:108710007D948F7594CBF39A04CC2B9BBFDCB81E51
+:10872000B82757AF472B4880DD6FA18F230E867C7B
+:1087300017AA6FE05E4B0BCBBFA86C36BE574582C5
+:10874000389FEA4D3F9863C1EB1BA2ADCB9D0DEB6B
+:1087500012AEB5E0BCEE7C2A81EDF728C40DFA34E8
+:10876000FC941DE57B15F1E0783773BDEEBDBBC40D
+:108770003D1FE4F0A279EEF9C970DE96E93F74F985
+:1087800090BFD9BD5B5593497020BB7783805EADA8
+:108790006A178223A16E213EC728F61CEE1F807542
+:1087A000EBCFD794133F7EAFBCC9F89C7CC8F05A7E
+:1087B000CDCF3192665DFB60B0CF183CAA37990DE2
+:1087C000719DF19B049F1DCFBB061AD2E8FC6A8FF6
+:1087D000525941204FF507B3617CC8E719837A9F4E
+:1087E0005829DE9EEA95EB8111B1F2FC0F70383EFC
+:1087F00075436926F0EBE360B76671408F45B9C5F4
+:10880000E3072468A1DF891BDD5BC7F6A225AC3E28
+:108810007DF50BD31B2FA17E9EECC17DA17962F16A
+:108820005B701EECC5419E6B013FF34CEE1C09F9D9
+:10883000D63D14E3A18B181C9E195537A22E861D18
+:10884000A8E1F969A12508FBB2BEEDCCFEB21786FE
+:1088500065BD7EAD1EC8E451C2DE109E9B086F133D
+:10886000F09CE52AE1209E475C75854AC0BFCFA0F9
+:10887000780279BC4A20F7C37D5C85AD336E7F13E7
+:10888000F05C18E7829FBBA8699D20D6D870FDCC0C
+:108890004E8BAF5B0BFB39E973868F023AA7EB9ED9
+:1088A000732D7D7EFB4015BF97696378CF58E2CB6F
+:1088B00085DF814AD85B7CFB9BC08723E3F09C6CFF
+:1088C0003A85953D09CB65607F6590C502F47BCA0A
+:1088D000C1C64F35897366407D14AB27DD2BB8D7F1
+:1088E00021F1ADC0F1D3CD642ACC139E831D6981E3
+:1088F000B802B607187E27D515C078E9435899A263
+:1089000004B3619C777AF1ED41BF6221D7630BB765
+:108910004C48073FEF9D2EEA7053B9F54E86660F1F
+:10892000056DF8FB50E70D67FDB95FB8B0809D3766
+:1089300048C931F6EB91DD09A3418E7EC0ECF853B6
+:108940003637C6A72F5662C7B39E1BC8EC16EF6911
+:108950008104747AC03BF35BB42BBDA725C3F3AE8F
+:108960007A8B21CFB9BA7C2F9EBBAF211D98875D32
+:10897000D3126FC8DBBD382EF67735FAF69E16890E
+:108980002FE67715E3F3D3C9C4971CAB5F9AF1398F
+:108990005D87A1DEF65DEF3AE039191B72803F3842
+:1089A0008DDBB53D01934FBE2882976E67C8A077D7
+:1089B000BA5556EFE1FB715ABB367EF74C859F2BBB
+:1089C00062F72A037C7CC30879B6FD04C6A3ABDB3F
+:1089D000F74C61BFEFC5E8420F279F4E7EA4357468
+:1089E000044D94B77F3BF0E86379232889EDD5F8EF
+:1089F000F8D8636ECAB769A2C9C0D7F185BD7C8EAD
+:108A0000E2E52993C8E5C2F1C7265FA2AFB3FE91A4
+:108A1000F7BBA64FA6B67D611E7BFF8F03BF7A6FA3
+:108A2000C97911B944D791536CD7D52D51751BAD68
+:108A30008FD4D59D51ED2951ED1951F56CD6BFCB91
+:108A40001ECC115D84740E3C315D1A07FBD8C1D970
+:108A500070A3C0F286AFA74FA6F59AC20ECC9FA90D
+:108A60006D175CB8ADAFE5C7BB989D657385F0F732
+:108A7000ECE20B3BDE023950DD2638054AEFB696B4
+:108A80002D9857530DEFA9BAF75A98DF59DD721098
+:108A9000DFEB77FCE126E4E787871FC27EDAFED1B1
+:108AA0004DA4F7F73A4E0F043CB674323D1CB57F27
+:108AB000D49DE9DE87F230EAFCAB17C6B545E85E27
+:108AC000EBFF8791EDBF8361E2179E582CD1FE7FAB
+:108AD000AAE91C03F612DC710972FF69213002F465
+:108AE000F3B3C43302F4D16D35E7EF31D17E07E43F
+:108AF000D06AB8AA61688EF51A89CAE903F6D0402F
+:108B000081CA92E16B92AF01781E480DE10D0D3FD5
+:108B10005B93C2DA078606C2BE6B5ECE8F59FDFC40
+:108B2000D06AA85FBFE602561F191A28D2F707FBC2
+:108B30002EBC06E0BFDE199B6F07E63079AECD6F25
+:108B400066813B2307ECCD6AA62FE0F8A585CAC550
+:108B5000D995C736AFA77098FDD3789457EBBBAEC5
+:108B6000BBB218D7EF2B863C3776C53BD767289723
+:108B700025B4033241872545F061CFE95051DE5FCE
+:108B800050B705F47EFAEC3C94F7A7B2DDF53963F3
+:108B900022E59F87B0B23E879DF748174D986F90AA
+:108BA0007E8F1DEDA0C7F97E12E51BC4AF8DE36378
+:108BB000540E937FA372989F9435F0F27A58CFCDDC
+:108BC000DC3E5DF95060A395C2FFF740242918DF11
+:108BD000467BF796B5546E24403E853B13E4C12D89
+:108BE00010FFCD8BD435FB7D6501ADDB227EDACA6B
+:108BF00019EE4C7D1ED0CAB5AC5D93372B73D9FBF3
+:108C00009ADE496F60F0497F7CC43A5847BC44F013
+:108C1000FCC5829943D72D46FD7D2DAE9BB8DD99CD
+:108C2000E07F1FAE186C02BB52C3CFA202F7345CC8
+:108C30008FC8F2D5353C69DFAFE7EB9E2752FD4F79
+:108C4000D7593FC883EBA7F6403E4B2E60F6403D18
+:108C500004625323F02552680C3CFF5F04A7DBA19C
+:108C6000FD1F85530C79F133E857B388CA0B934E37
+:108C70005E70F83D2D04E5F442DDFD25F439F88100
+:108C8000370DF43C90A3DBC7997D4F0DDA7FDABC3A
+:108C9000E2FFFDB5A93791BE7C166D9F1DF8BD653D
+:108CA00039C6019516948B07AE24AEC5203FF8BE99
+:108CB000AC665F16FDB4EA1DF0A34EE688F89E553B
+:108CC000C3AB50BCA594C2E921AA56E13CBA6F06D9
+:108CD000CBEFD1F4E64A7EEFEECABB2FC43CBF1EF9
+:108CE00012C2DF65F38D2528FF7ADB670DC5768A12
+:108CF0006F9F15F8BD220E7F77606501C173362B1B
+:108D0000675D80ED3BB5B8D22C0B7E67E50C464F16
+:108D10002B2B581E26E811805B7FF490D6C0E21BF7
+:108D20004472E7EBF301DEE5F88B2F0C6DFB18ECDA
+:108D3000CAE556B42B4177E2FE883F1DBF47F1BA22
+:108D40000DE599E6473D99C9EE9B252EF4CF1FB45A
+:108D5000BB4B505EDD17AFC2FC9BAC64996514B889
+:108D600023E47E947B7C3EC4FF0CE679CCE1F6DA0A
+:108D700067E527ED600FBCC1E50D100CF8CB73095A
+:108D80006B9F7B6FFC41F06FE6DECBEE9B25CB2E1D
+:108D9000771BF73BE85CD3203ECEFF1AC376808377
+:108DA00007DE73C0F8FF6987FB4C3CF7B2F3BDC424
+:108DB00047DFD7E5437F0CFC0B717691CD9FD4C77D
+:108DC000ABB1EE05FD98CB773A7FB7FE7BDA77A2A1
+:108DD000C7A5FEDD2740A714EE41380716BE4FE4B5
+:108DE000BFD76A9C6F8A127ED44ADB67D78B894BC8
+:108DF000283C3D8BECB85E6DBE73D2C397B2DF8565
+:108E0000358E7F24BEB608E2E19A3F42EE35FA6322
+:108E10001097E8AD8B98278D7E4D9FE7DC9F8DF6F0
+:108E20000309F99B59DFAFF79C862A44CD9FD39560
+:108E30002A4880370FCF5F5094F06CBC572A6ADE07
+:108E40001A3C9541260E774617D1F05606717A885E
+:108E500082778A121A08E37A1699114ED1E36BFAD7
+:108E6000F1192BF1811FD9280848AF8D77C7A3BE10
+:108E7000231686676F659C0AF4FBAC12C63C27DF9D
+:108E80000EF6FBA03DD6F0AB28B7CE63F1869EF779
+:108E9000C4B5D0AF3B95D17DF77699F31B61F74C04
+:108EA000BC27AEC376818DDBBD381EF3A7E07CA85E
+:108EB00002E7367D7FAE87F88BE6E77FFE2ABB6F41
+:108EC000017ED747EF27C3B9DAF25111F981F7C70D
+:108ED00000BFB7C5F33892A702BF774B1C813C8D0A
+:108EE0005A938079BFB59517E03913C2EF79AEE692
+:108EF00053AB35517F7154440ED49A0E0D057FABA0
+:108F0000DAB21CEF7FA6ED6F809F063FC3DBFB3B11
+:108F10001FB97DF150BBFCF85FF1DC7BAB913EAA41
+:108F2000237484E7E72AF574951BA117B4C7418E13
+:108F30004C26786EDFCEEBF1533B0210C7F1F2B84E
+:108F400046EA5E76AFADBDB085405CD57B94D92353
+:108F5000E3DBD7EE03FF38716A077864B43F8BCB4D
+:108F6000459F2F1AD7BE4204BF4FB363747EE78874
+:108F70006B47EA4B761E17FC58F85E081E01FF4847
+:108F80004CFF3DCDF51FD59328AF17F887A19E0460
+:108F90003D06724EF38341EE819C7971D0C45B072C
+:108FA000A5C27D86136F1AC4F66946A0DDEF3BB7F4
+:108FB000FD28AD1FF8C3678E9731B8855725303926
+:108FC000023F100A71E4DFC86B1FC6F949ECBEC648
+:108FD000D5B92897B5384E358F6395F2B84F298F9C
+:108FE000FB40DC559F170B714D7DBD9ACB851AF860
+:108FF000BD29BC4FC01CC98B8578CF6412B4433BDC
+:10900000C47D1CECFC9DFE7D2F094C9290CE7F30E0
+:109010001BEECD5AC9D63B87E37D9595C57BC6DF50
+:10902000BB5664412CB6DE8451EEDC070A23F77789
+:109030007DC1F1A4C1256ED0C412807B9CC8EE3FD7
+:109040000F3FC07E0FFB30D5DF5B783CE45A1B9EA0
+:109050003F769F07790B9233E7DA18BFEBFAF00EF1
+:109060002BDEE3EFE7F2487B3E6510CBF7C5381106
+:10907000C07D713CDAE114CCF940474583357D4A27
+:10908000F2213E7590E77FD6DE68F3C078211E3767
+:109090005F3D88E98DD583D8EF3F68F55EBF8FD3FC
+:1090A0008BB6CF05F11A7D7CBBB9B73F8BAF68FAA1
+:1090B000F7E98AB8B5ECBE778D6E4D78BE323EAF1B
+:1090C000588138D30E2E474AB83FBF033670419EB1
+:1090D000B4F0B8B4E49C0DBF1BB4E3681EE653A61D
+:1090E000284CBEECB8398E407EDFFE632F3DF21E69
+:1090F0006D3F7954C1FBF2E6F378EC0EB8171EE42D
+:10910000E53633C619AB15664F56EF1EC9EC18C5C8
+:10911000B30AF2BE7D5B658C7B553B021B5FC0F6DC
+:109120004C17C52C9C176576F0F678F67E5CE01738
+:109130002F835FBA3BDDE5A3FD176578F6021F6557
+:1091400099D504A2EDBB0A91F3A48702CC6E3E042C
+:109150008207BED36EE7BF33E0CE5C40C7F9FCA107
+:10916000745C0F95B7685F7DFE9819F7D59EEEFD8C
+:109170002E8B8F1E928BF13E9943DB0A5CD4F32435
+:109180003DC54A10E2DFDEC799BD37CFA4AE01F876
+:1091900090DDF12E83BFFA5819BB5FA2F2DEE967BA
+:1091A000DAE706F9AE8FFF7693700EFAABE5835BD4
+:1091B00020DFB4BB7D848B6D6765E0264A2DDF7FA1
+:1091C0003E2C33F88677C948CFE73A3ED045EFEFDB
+:1091D000E089047FDF4DBFDF16BD4FD1B7CEF0E889
+:1091E000DD91CEED3A63FB75D99E53C06FB54F7CD0
+:1091F0007760910ADF0BA33C247E166F3F2CBB6780
+:1092000003DD264E0E1AF2B86C2AF70FCCDCFE23D3
+:109210004145CF875A7BD14412735FE7FF002E3F51
+:10922000E0290080000000001F8B08000000000003
+:10923000000BC57D0B7854D5B5F03E73CEBC92992A
+:1092400064663209931739790792C01043448B3A08
+:10925000090103469D002A5A8BC31B943C046D638D
+:109260004B9B814408881A2E01010127084AAFD878
+:10927000062F20D64807448AADDE3F3EDA8B7A2F90
+:109280005F508A6805225A7EDAABF55F6BED7D92FE
+:10929000394322D8DBDB3F7CB0D967BFD65E6BEDAC
+:1092A000B5D65E7BED9D5855622C91317B37F385A9
+:1092B0008A18FB067F6EE84F635503953336C5CC9D
+:1092C0009218BB96F19F8CD350DFC6984D55191B51
+:1092D0000DDF4F874DB3209FB1246C9A2BD200A491
+:1092E000278D2C6C298574A33DB42D135BFA18F6D9
+:1092F00033770CFC179ACE95598BA504BFABFB7B3B
+:10930000DC8C9DDAEBF4AE82EFECAB6F6456C6D822
+:109310000C26EA9959ABC5C5D88B2D52D802F566F3
+:109320006C306FB3427F65CB7CB21DF2BD5B24EF26
+:1093300036A837A3A53C6F23E4EFDD53EC95A16974
+:109340001C8E83F990332443FD6B1BC7B18FAE6233
+:109350006C96396452E03B7B4E623B18F5DF82FD30
+:109360002F8446C92597E261DE063363163EF76F08
+:10937000F09F50443E0BFAEDEC9019CC97ED84EF42
+:1093800005FDDF172AE183521C63B59D51EDD9DF3E
+:10939000CC7DF5105016243CBB4DEC1EBF8D263DF8
+:1093A000A4A698B13FE27F93198BC9F05FAD121D5F
+:1093B00072864CB6C3BC2BF8BC7A774B84D75AD68E
+:1093C0006062D84F7B0263D7448C6B61E158484F91
+:1093D000C9412A9F6B5E4369B59A4974BB97F5985A
+:1093E0005836F6DB6BF2170FCE07D597E1839B0556
+:1093F0001F2C3CCDC2D7C1780B97B070ED089EDA18
+:10940000219DABB0601CE0752EE0205EA431251CD0
+:10941000AF6A413F5E1684F479C4A71A8167C463BA
+:109420006479FDFE6FCC91F92126C6ACAE7E3A037D
+:10943000A108AE21E31A4635009CD72E09C90CE6D7
+:109440009792EEBB3107BEC796F2F9D61FB358D438
+:109450009198F7B32CA8F7655AF90BB930DF7A85E4
+:10946000F93AA13C16F0D201DFB7585910FB7F2A18
+:1094700097CFD763E2FC6B54FC6C940DE9D21D3698
+:10948000205D129903F951C3E7163BB42BC1761244
+:10949000B5EB6B6F612D3111ED2B7E65650CD6CB75
+:1094A0008597EC213354654A20C309FD257D60660C
+:1094B000AB207FF657F6F9D8DF59239BD609F5DDA7
+:1094C000326BE8247E594EF4F919D23511B9A9222C
+:1094D0009521EF4B93529907CB97D178B54EE0AFDA
+:1094E00001E8DB579ED97D3BE72BB3BA0DC6BBE045
+:1094F000ECF921E6011E1684FC0F91CE88973DE31E
+:1095000046FD04BED7FB6D5E8EFDC028E457B3FC5C
+:10951000C0ED16E0AF09F292DE87601EB5E936872E
+:10952000199A5466FCE71FEE84FC277B8CCC8C7464
+:10953000DE316E1ACBBA140E2D5D10327ED813B107
+:109540005EEEDBA9CFD776EAF3F54CF9B047E3033B
+:1095500040C116D5EE3E5548B2C3FB0DF0B7D9DC7D
+:1095600070BA03E035BF6CF62E85CF8BD4C0365C65
+:109570004F7586DE23886773C667230280978A8CBF
+:10958000AF8EA422FE7FCABC08F7056BF90CA2C7F8
+:1095900046AB1A8C905FF582FFDB87565379FB262A
+:1095A000B32AF1F2EAD120B7E6D312A62A1603E0D5
+:1095B000BF7EC3C44FA411546E417AB4039F52BB03
+:1095C00017A4D05268377FC3BC6A06E56758C864E1
+:1095D00001783ED1F02C774DB0C07FDB5D55C35094
+:1095E000BE285F2B7EA4FF0AECEA9A7E7CFDBA6F50
+:1095F0007D5ADA4E025E6E62128BC7793B03BFC69C
+:1096000079D65A7A4CE5D0CF0D5F7F4972795EE307
+:10961000ABD927AF4279E39B41F486F9A11C99F7B6
+:10962000D041FA2E4DB6107CA7D26D21337C7F75C8
+:10963000A399E79D26CA9FDA22517E5EA714B264E1
+:1096400062FD8B09E528BFB7181D6676299EA2F139
+:10965000F2F1E6FF886300F2C78C55E1FA628E866C
+:1096600038BF1DCB1AE2261723BE6EFC04E5D7BC1B
+:109670002DB2378C72FA15BB3797617EFCB0393644
+:109680006CFF454239E26FEB78874CDF653FCA21BA
+:10969000A6F8BA6F80EFCAD6AB555C2F87B770B803
+:1096A000E7392DCF209D6FF85A26FE570C2CB0DBE2
+:1096B0008674F00DC375A76EDE3101F1FB714D8A22
+:1096C00081EA3F2F3107E2C3D99884DFE7498A1F37
+:1096D000D7D9FC0D0BAA595C3FDE57A932AD9BF2DE
+:1096E0008C25493D36E2FBDB51DFD56E013EC7F1EB
+:1096F00027BFFF873BDDFD7C2F4DDE70CBB5D8FF4C
+:10970000B346E22FAD9FFACD370BFE602C0C789A52
+:1097100027F064CE589287E35F6E3DCC5BD690E72E
+:10972000B05D7E5DF4ADF7CD7C7D489912C955964C
+:10973000E6223D33D87AD4F493ADC040F2DEE26540
+:10974000BE1D900E31339F04F22B2F53213CE46554
+:109750009AA89EF297453BDF04F8F7A981F84CF8E8
+:109760009EC17CA350CFA8BD8E8A78E8CD860C52CE
+:109770008A7098433B48CE411EF0B43E913DB32AD7
+:1097800002CE2CEC6F34AD574F26F47BF6BDAF8E76
+:10979000201EEB867E3602F576FDC52F4D2AD0D3EE
+:1097A000D625919CB579FD0CF9A3BEAB86CD2EEAEA
+:1097B000978FF55E2EBFA3E7559B69E4EBCCDD4B9D
+:1097C000FDDC9CC5D75DBB93AFCF4D8D3121947B24
+:1097D0009BDC212B021D5B1A6428DF6F2995BD08D5
+:1097E000B666A7F82D9C5E16DFAB4C467EF5CA5ECA
+:1097F00014F1DDBE8F5A1220FF66E978AF0C799B19
+:10980000EFE9D62C9CB7D728CAB38338EF37C69672
+:1098100093BD728B4FA671D9FCB810AA8A6EDF3B3C
+:10982000EED930EEADCCB7F624D0B10A9437D2B130
+:109830001BC7067A9D7104C6225EB4F9DCEC9DB8A4
+:10984000F664A49DE1E3F6007CE27AAC74603C949B
+:10985000A8E51548A71BAEE774F8F4797368198C6E
+:10986000FFA915F44C84BEF8D4CEF5CED44CAEC7C7
+:1098700018EB1C8A72BF2FAF0C33E0BA7FC0C1F166
+:10988000E136750EC5F5F62749DFCFBDAD320B8148
+:109890009C59D02AB11080F8E9CF5F1C8AF2F79367
+:1098A0001D2F0E9D19015F743B2D9DAE8DD7F68443
+:1098B000CF02E3CD64DA78E1341C6FA6D77C02E5F1
+:1098C000076B1DEFEB89B01F484246D4671B7C2411
+:1098D000BFCFC16A44BED3DA9D9B1FE3433BF31C59
+:1098E000B38424186A66971C36637F3E5F8E1BE83C
+:1098F0005DA7B58FEA7F03F20FC025ED97C276A86A
+:109900001F5BD44BF27681C57F24158A16201DA1DA
+:10991000FE44A4A384FCEA33E1BC1589CBF3330EE7
+:10992000FF834887396D7A3A66663AB87C77B8899A
+:10993000EEA63A9B82FA22A999713BF0414308F5C1
+:10994000B53B266E04033BC694E2B1A19CBA212F1D
+:10995000A6C5108FDF8786B07E7A4A01B50B567098
+:10996000FE0E26B150B3845D364864073A7A9802F9
+:10997000DFD3C630C72A944599DC4EF430EF069900
+:10998000ECC44E09ED440D0F9A7C47BE41B9F7A9CE
+:109990006421BE91BA24B2FB6443E774EC77303E95
+:1099A000DA12C5475BFEC97CF4ECA07C1450898FA9
+:1099B0003C9681F908F64DDFA93E0BFA15C0D71089
+:1099C00081AFC7857CE97DD04274831F09E75B2D99
+:1099D000FAABB6D8C2F20892139FF5C96FE86733A5
+:1099E000D89FB84F4946FB19D2D4E6192AB7DFBB36
+:1099F0007B24E82FF66A0BE9BD470CDD9968E70F79
+:109A000019DEB01BF963C8F4A29266B24FD29C284B
+:109A1000F751D6E0FCEB1AC7F9B91D00FD221FD59E
+:109A200098683F51F750B99FDB0155B43EEA575B48
+:109A300055D467E3BA3297227FD42F01FB08E5EFB4
+:109A4000FE8E8D73215F37D5E6453BC56A995284FA
+:109A5000ED58AB7E9DAD943AC92E0E4E645E94DBFC
+:109A6000E74286A07124CAD99EAD3F413DBEA0C841
+:109A70001B5471BD09BECC61A417DA9DBE6417E00A
+:109A800075DFDF64DA17B58F823CA42F0B7AB6D767
+:109A9000F8929D909FB9DA4A786FEFE0E5E7EC80A5
+:109AA00020E83F45E6FDB1780BD73397CA030BE2B8
+:109AB0003D690CD37E36603E45CBB73D41768CB6D2
+:109AC000DEDB33393CF6227F265ABE017574770CF3
+:109AD000F04F926CD0364541B4BB63714C9EF7E1B8
+:109AE00070EB0C00480A66BF5E53393632CFEBF795
+:109AF000B77F6472651AE9D7BE72041BF4AE96F79D
+:109B000059018E15F6FE7205EC49CB7E49B4BF763D
+:109B1000F2F81C98BF24C60F9AD6F800DEC7AD4CE9
+:109B2000375E247C4A54FF4615F7F5A27E70A47F69
+:109B30003C545857A2B56F6EF301FC8F1BF5FD1115
+:109B40004A457BCC68E3FD2EE7776B568FEDD7FF58
+:109B5000600F38B346F7DB012BDEAF6E1B0963C520
+:109B60003ABE30A17ED5F479BD5B223B237ABDA6F7
+:109B700066717F05D8B5A95911F66E35DABB32D9B1
+:109B8000B9137069D52FF133B42FC16EC8C0F1CEAF
+:109B9000BEF7D9A983F0BD7DF2A764E7D75F54C8AB
+:109BA000FEA807FB03ED764B17B767D97E23E95D67
+:109BB0008DEEF70AF9D3EE04BD8F7CFA8A341AF9D8
+:109BC00094B186A1B7010D9AB37CC3100E6D3F16F8
+:109BD0000D6F4516B7CBEB0B2A36E661FFDB25860A
+:109BE0007A7F55C18749689FD4779D489A13D16E73
+:109BF000C1FE758487053B8D03CEBF228BDB9B7531
+:109C00002FEDF5E17AFF3424D15A9EAF8456A25D40
+:109C1000397FBE012D35561A9A7127AE7B36CDC4D9
+:109C200072617E05C2AEA9DF3925782DEEDBE0AF8B
+:109C3000049F36F9E7D2FADE34CD62639908E7CCA7
+:109C4000FB090F8E181FE261554145328E53573381
+:109C5000C181FE937AB0B3B0BCEEA1BBC89FD267FE
+:109C600007EF3756A1FD5506F6D6BF01DCE9AE4930
+:109C7000555E588FA9F2EE518B21BF7E10F9FB5E25
+:109C800036A7678BE40FDE8AEBFE2589ED50FBCB10
+:109C900033F673BBEEAE2C6E076ADFEFCA52A8DD57
+:109CA000D860F738E4BD034A4F2CDABFF5CCF7395A
+:109CB000EE3B99DFA6EE203A71B9E36E52C9AF646C
+:109CC00071F73C3212CBC72AB49F604ACF5A1CF7B7
+:109CD000EC4AB7771513FC8BF9878A4228478F66C1
+:109CE00005E621FF94093BF2EC4B378E9A59D46F6D
+:109CF00027ADECB08696011E56DAD57FA942F9F65B
+:109D00001785E41BB3F4768F437AFCD545FDAEB4DA
+:109D1000865622FD836B8C54BE3B25B008F9E67451
+:109D20004D551EEE83992D985703FC6474B731B4DA
+:109D30001760FB407E068BDBCF54C88F0BCE5024C0
+:109D400094F351F6C738F4F3D0BE010687EF1542FD
+:109D50006CE502179CB2D01268F926A1DF1E39FA11
+:109D6000D554053F6A768AC11258804D2BA7C5305D
+:109D700019F97E79EF1103CC27D6DD4D766C6DA7EE
+:109D800044E3D416BC6042BFC97D9D7C5DD68B7D0B
+:109D900000E06F28DA038F64C58AFD670BF55BCF9F
+:109DA000BA691FCD76717A3206F5EC91FB89A5541C
+:109DB0004FEBCFB48CFBBD6A853F067AA4F2F56207
+:109DC000BD6BFE095898C23EE0E3AE97BA7D32E221
+:109DD0007594E48DE41B2D7D3E8BEBF7F843BD13AA
+:109DE00070FDF6027FA15F66A35473FF6B30BF8DD9
+:109DF000A3877BD184F2003BC925F81D5811F05E82
+:109E0000BAFFF309C8376070D37AADDB5F2ED7DABB
+:109E1000486FD3FE71486C4307960FB9A780F46A68
+:109E2000CC55EC9EC9F0FD05B1CE926DDCCFE55965
+:109E300016CC5C5484E3FBEF7F0DC72F8E213FE5EA
+:109E400010A08DDD45692BFA853C6CA984F5D6C53B
+:109E5000F1FE130DF23D3545247729EFF24ABE6D30
+:109E600090766539A97FD87755219CF89DF663C017
+:109E700019B89F453F17F633249BA76793C30A0A77
+:109E8000884DAC67EB0EE4CFFD6607E2A97AFF6F61
+:109E90008EA1BEACB6B04E19ED95283B6349FA943D
+:109EA000D7903FCF9D39B5F561F8B6EEB67DDE00AF
+:109EB000D1456F3F44EF17B66195E4C1EDBD0FFA90
+:109EC000E8C9EDBDBEFC3FDCDEE3767D7047ACBA91
+:109ED00023429ED78B7DDAB9F9E7E350CF7CDC07CC
+:109EE0000FE8E9B27E7B65E6F6D813B8AEFAECFE71
+:109EF00028BBE1E833B141A4FFF94E2BF9E914B4D2
+:109F00007B009E33F6DE1F2272DC26BF4FC2FDC3EC
+:109F10006EA37719F4577FEFA7BF30C0BA533AC08A
+:109F2000EE89477B5F8D2739FBBACC76A05DA6F81A
+:109F30001CE8F7D0E0579C133CA8B75BC4FC179A09
+:109F4000C279640799D87CCAC785F3D0EE7959E8FD
+:109F50009D85319087EF8D9EC0D748B714339757B2
+:109F6000D80EBF77087BAB0350E240BC1C837D77E3
+:109F7000A6D0DFB8FF79343DB48AFC3816A2E74793
+:109F800007CCDBD0CFF35181216CE27E09F263A9CB
+:109F9000AD0A4B86FAEA316B48E5FE2E8B01F4FFE1
+:109FA000ACC7EF7B03F715B30E703FD6AC7B97DCE5
+:109FB00082FB8F8F264F30A1BC99C302E4779EC7E6
+:109FC000B81F7A010B717F35731870BCFB406C6C45
+:109FD00042511304EC5F0D9F2583847685DA027964
+:109FE000329A7D6D5530EECC1603ED4B66B5EAFD29
+:109FF000E91756DD5F857A7C458B81DB8FAD12E9F1
+:10A00000F159CCE741BB43C36B617602C983608BD6
+:10A01000C187E38CCBE67A054814A2F989B4C52838
+:10A02000FCF0028EA5CC10C6D420F1748543A91A89
+:10A03000483F6BFDB5181B2CE80FEB4D37901FF810
+:10A0400082C9378DFCA8AE3C867EC4167B436B1557
+:10A050002FA73573C1DAEBA7F2EB146EF031D5857B
+:10A06000F23233DB40FD45CF774E9B3E1F7D3EB144
+:10A0700020A4CFCF6281FCE46CF41BE9BF67667358
+:10A080003D706155A63807F0D239408B517D3B13A6
+:10A09000E5D54A85E4E5D2348E2F433A4FB39C95FB
+:10A0A000D3887F9D605F10BC1CFEACEBDC12EACD58
+:10A0B0001627E7CBFF29DCD1F0DE949DC7F18B4654
+:10A0C0001E8CD7B2520A717C71B8AFD47FB1305BAD
+:10A0D000BFEFECCBFFE3F79D9C1F57CA62BD394829
+:10A0E0000ECD74F0397D24799F09E3771BD80700E2
+:10A0F000F7AC957209DA29E3A6D8681E7507ACE4B7
+:10A100006FAD5DD23314D7515D454F5EC3007845C6
+:10A1100068154D7E41BD996ED827E0BA6DD59F5325
+:10A1200081A66591E74E53D27C4BB313713FF2D1B8
+:10A13000EEDF20BD775B493FC1FF0E9A517EBD9493
+:10A140004976535E5A606536EAF598F0D66733D1A2
+:10A150004EE176526D97B903EDC0992D11E75EF887
+:10A16000CF6AFD39186B75917F83B5EBBFCFDF1CCC
+:10A17000D5EE927331AEEFD79B02C3D0BEBBE17A6E
+:10A180005F32CAD5330B0C0CE93B4BF6CE45397226
+:10A19000C6AAB7BFCFD839BD76666BF2DD9B877490
+:10A1A000EECB5F42676F1ED27996810522FBA945EF
+:10A1B0003A037D170A3A9FD97B751ED2F9B3DD5752
+:10A1C000E7219DD71BDB7CB86E9ECD08EC423C9E00
+:10A1D0001CEF27FB09E455DE77E1C70351FC78E06B
+:10A1E0007F8F1FA9DD60FAF0B77D70E8F5A1DBA4D1
+:10A1F000A6A13C9C69317FAB5EC49F01FD6B163309
+:10A20000F9250E7CF5C563CFA01DD225931DA2F5BF
+:10A2100077400964A35FE1C0318F37280DDEFF83EB
+:10A22000C26EF5585810FD1F9ADDAFD98FD1F2F8E4
+:10A23000B898CFD96C5F0DED1785BF76BEE8D31205
+:10A24000FA82DBA9DB25F2C75AD44E1FDABD75AFFF
+:10A25000CC70A0BFF67488FB67EBF68E22FFED8210
+:10A26000D0ABE154B40BBB2407EE1F166C3F118733
+:10A27000E7DDB01F3D934D78E3FBD1F1623F7A3AC1
+:10A28000F4511C9E8BC3F837E33E22D6DD6B42FEB1
+:10A29000AD837D1A5461754AEF11ECAFCECDBC4150
+:10A2A0001415FBF5FB36EDFC7293DF44F26E539709
+:10A2B00014C27D5A9229909986FA89A5394EC5F61D
+:10A2C000AF97FFCEF6A5E0B966FFB9B1EF6B84CBCF
+:10A2D0008DE74DD0BE67633CF1618F91F9C80ED810
+:10A2E000681772492139F5E7CD4EDAF7D00FD4FF60
+:10A2F000732893F29ABE9EABB0B002789F3BD5F71D
+:10A300001ED20DE577384A7E47E6FBCEA35937D7F4
+:10A310002F20CFC3039D8F8B736A3CDF8D6C5FC78B
+:10A320007AA91D9EF3EAFAD5F601AC61940A70DFB2
+:10A3300077B7CD8BF64B3DF07563493F1F2E145315
+:10A34000D1F8B04EF879EBE77F48FB81FAFD920334
+:10A35000FDBB0BBD9C0F17C23EC93CE2D275CB3A88
+:10A36000810F23E01E6C1D5F9DA35FC77DF97F9267
+:10A370003FB322476FCF6AF3D7FCE27DF3EC92F84C
+:10A38000FA8A9A57F4FE32DA9FADED0FAF54AEDD84
+:10A39000D9070FC7475FFE9F2CD7E644E165B0F3AE
+:10A3A00082EF2CD7A2CF0D72B81F1CCF0DF05CF737
+:10A3B0007F7A6EF089DA9664203DE8D39DA7A29D4E
+:10A3C0008EE3B46E91C93E9820F373E85ABB99FCB2
+:10A3D000B4D1E7ADF5EA0471BED8FD876B507FEECE
+:10A3E0003132D4EBF36DF3E83CB35EDE6572A80363
+:10A3F0009C332A07C97EFFAEE7EF8FE6F49DBF6767
+:10A40000E2F97B59855E3EBF6AFB22211041E78A53
+:10A410002230FC07E0678B1264AE88EF4FE6707B5A
+:10A42000F8551127E331B1568CBF78DC1EEBC37DA4
+:10A4300087C7C0E3789AB3FC5B500E5A548EC7A707
+:10A440005EBA8319607E4F193B495E046B6D5E9462
+:10A450007B9A9F45EBDF2EFC0557CADF7BA3D6FB1B
+:10A46000DE7FF27AFFB536DE773D07DB00B8D1AD8F
+:10A470000346E75D6FE0F94DE6A5FC3A583F83F1EE
+:10A48000EDDB39FE377368BDF946D0B9FE15CA95C4
+:10A49000D8D2DE8FD09FC3F69855DC57A05F83F4E7
+:10A4A000E1EA64AEA7146F19E219ECB9328C833A71
+:10A4B0008EFFBD6670FBEF74DFBAE7F6DFE941E5BA
+:10A4C000CFDF67FF3565F83FC5799E2CF7E5A17EA4
+:10A4D0005C6107F8715FF7731E3FB3D9CAF973B3B4
+:10A4E000C4F992352668FE119A57F0797EFE1DCD8B
+:10A4F000572C57CF577DF97FB2DCB4F5C1F1BF2C93
+:10A5000037E7FF350EFD9C83F71324BA9555741376
+:10A51000DE7A5F91D8B608FF737D378F434B17F013
+:10A520006ADFFF2AECBFB9B9BEA118CFF5D97B16F7
+:10A530000B8B075307790CED2EBF8DFCFF759D3CEF
+:10A540004EA46E09A3F3DE3AF46F16A1DFAF86A125
+:10A550007DB74F0D1460FB15EFDB82723CFAC52707
+:10A5600033B2EBDEE3F9456AA088E2C596F4E8CEA3
+:10A5700019CABEF96239FA2D005EF203B8D12F1361
+:10A5800041A769B9FC7C404B6F8B821FFDF4C4FF6F
+:10A590009D7208EDC158B59BFCFE757BB89156269F
+:10A5A000FBC83FCFEE7331E4A3BA3DE5A35EA3FA47
+:10A5B000D65168CF967D50ED403FC467D7B929BECC
+:10A5C00060A8DCB300EDA9A359817108AFBD343494
+:10A5D00011EDD10CB047D1BEFD6CF7C45108B726C0
+:10A5E000FFD6A37F1BFA5D6FD7FBAF99C597F930F4
+:10A5F000FAB7B70DA1FDE1EE94C0CDB9B84FB37273
+:10A6000078836BAC7CBD0ABF76F4FAD7D6FD10D93F
+:10A6100040E30CF9BE85CEA135B9B0DEC80296EC98
+:10A620007E7972958897037CF078BDAE1A1EE7217B
+:10A63000F236B73E6EF16CF6F8AB707E57E5F2B8C5
+:10A640009439965E09FDEC73C4F9FB8D228E428B22
+:10A65000A33AE3F0CFC6FA6C4955FFB97B16B6773B
+:10A6600070FE17F131B117B99D9CE53011DFD85B51
+:10A67000193F3702BE41FA8CEDED1E170FF3C96981
+:10A680000F8F457C1EB868207C28356FD079493CF7
+:10A69000920DFAC95EDDB3321FFD258E77AF43BA46
+:10A6A000A86D8E0A44DD3ED5FF00C1A13414E0FE42
+:10A6B000B1E2F7461E0FF84A2CE9F9F6A10B291E64
+:10A6C000F0ECFBC0AF9997EA032D0DB26514FF972C
+:10A6D000B5FF1DF2DBDBF74803C6753E9E6BE3E773
+:10A6E00049C16E8A336363DD840FE5950F82685F2D
+:10A6F000282B15F254B4187D062BD27529233F7BE5
+:10A700006EBBC38074C9107125E70EFCF78800ED9D
+:10A7100047343F7D8852C5D8B31CF757CAD29EEB49
+:10A720006105B3DA3D4E431DFA358DBD75E41779E9
+:10A730002596FC9F19FBB3977D0FF219AD0E26A14C
+:10A74000FCF9D57D19C8D7419867EE00F36CCCE5CC
+:10A75000713BCA2BB106D45BCA1A4671888A33A9E9
+:10A7600082E05E0779E86791E01BEDFC11C0F5A07F
+:10A770003E9A9B1BD88E788E15728035C690BFD0BE
+:10A78000AE70BF86BDF1FDE797427EABF0B71E3AD3
+:10A79000503899FC732B1509E970C13923C301DFC7
+:10A7A0007F99CBED11BBD2CD1CB648FC1FA2B8CB14
+:10A7B000AC57785C9A62E47CA2AC7477A0FFEFCBD4
+:10A7C000B400C5975ED71296E9FCCA71726D951AEE
+:10A7D000B17FD9C0F548DD4EBE6F8EDEAF5C4E7FD7
+:10A7E0001CCDD5DBDD7DF97F925DF24EDFF87FE792
+:10A7F0003E84E9F76FD1F649F47EED12FB3AAABF29
+:10A80000C1EC142D8EA3A27F1CE28757ED9A1D1474
+:10A81000D4C5B954D8F8B8CCA2EFFFF94C2E27B460
+:10A82000B897A4667529C697F7FE94913F4D8BCBD8
+:10A83000D1E27082157C9F103480DCCBC4F39F364C
+:10A840008ABF49656149227BBF8761FB2118870365
+:10A85000ED7B72B3A8FF2DCCDB2A935C542584DFFB
+:10A860008AF11B09087768E35C1CEF361B8D67C50E
+:10A87000F88D04DA27D03A4EF1F3B8CD71F379BCF4
+:10A88000670AE85FCCA7E470BEB44E33511CA7162C
+:10A8900097A1C56F6878A910F84EC99F9B89FB01E5
+:10A8A0002DCE637D4CE8E75619E33B84DC5F6020E6
+:10A8B000B9AFC5CFB5E7AA21E4F77318E769BBF2D2
+:10A8C000788E68FC6A711D37A40792F346535C07C3
+:10A8D000E9512D1E43E397083A06AD30FEA657B85E
+:10A8E000FD5E31DF44F09F5B3089FC87E716181866
+:10A8F000AEA38A2E33E7BFA8F1364D33B130F6ABA5
+:10A9000084AC283F353EB89CFD0A742D40FFECA175
+:10A91000A69DD92761CD1F6EEAA4F49C55EA944701
+:10A9200062DA3B1D25D58867874E51AEC13895DE6A
+:10A93000A112B04EC9CE9CA9944FEC3D8EF949F9B5
+:10A94000374F55404F9CCBEDDD2A619C49FE89294C
+:10A9500094479E4C616CCC33BF9F12A479737FD314
+:10A9600038E16F323B03D7E525E27D809EE5DDE4EB
+:10A97000D7E171FD18F787F4F0D84C64DF7844BC58
+:10A9800025AB14F19778F202F9E6E451745E6D6339
+:10A99000EA9E6E2C4F33737DCF383F37E7727F309E
+:10A9A000A948949D699AFFA82788F2AA39D349ED4E
+:10A9B000FBE4EA1E7388FBB1F8F86FED2DA6732651
+:10A9C0002D8E943147FAD4628A37D1E51FB7F273DE
+:10A9D0004FA638D2D17E68360A3B55E463D202775F
+:10A9E000E545D8496F8DFF5111AE8733FB7E9283C9
+:10A9F00072EA4613D8F103C8A5D4022E97CE196D7A
+:10AA0000AD12D86D6FA4066621BE8EC54E9FE08440
+:10AA1000794D4B28373911DEE0CF6594938982DE7A
+:10AA2000CEA91C3E67A55F9A03FD365B613D43FBE3
+:10AA3000C480E2237B3D3055BA0DE06E9684FDCE96
+:10AA4000D478B2DB0BD4783CD75BD8F80EC555CBA5
+:10AA5000420EC8420EBCDDD493A3E482CAED5C234F
+:10AA6000A3BDFD8E385F7E2793DD5333803F737D1A
+:10AA70001EB70F27CB6A31F291FBE1B1EF54035FB0
+:10AA8000C8266F88E8976E5791DF0FDACB3C3DD030
+:10AA90008F94F1D3528C4B6E4EFF6929C695C82E08
+:10AAA000AFC71F915F9FC7F9B812EB21DE621B4A47
+:10AAB000518FFDC3FA8B87FE8AFEFEFEFAFA3173D0
+:10AAC000B8165A7A872AB03EBD9EC026A4DB8519E7
+:10AAD00027E8BCF587296F1DC7F888B78C6DE3E2BE
+:10AAE000500E654A826FB9BD76245FF36BF2B8F6FB
+:10AAF0002385DCAF097288C74F16F37B34D5531911
+:10AB0000ADE76A115731C1C1EF254D28CDF436C3E9
+:10AB1000D46E61BD0ACAE909C7FC71483F36355099
+:10AB2000EA2F1EDC0E631EA31A295726AA1179F8F4
+:10AB30007B53813E7FB3579FBF75CCD7F991F935D1
+:10AB40001EDF8B38EF97251EA719BC8639689E6ECD
+:10AB50002988F652E18B291DC27F4BF184FF2AF62A
+:10AB6000732F8E61549EB4D3B20DEF17687E705967
+:10AB700094177A9825C345F8203DDB2B89B84437D4
+:10AB80009DF5B07DF73B38FEA0AE09FAD93743A555
+:10AB9000759C6433B0EB71AD975AC87ED2D645B37D
+:10ABA00015F81BF058966A89417E6F367A37605FD8
+:10ABB000728C5945BD5A1E67A1BEE59F29A4979680
+:10ABC0005ACD14DA7AE8D118CA9729CC8FF1180037
+:10ABD000E2544CDF327A430D385FA887F36D76324A
+:10ABE0009257729989F434F44B743DB4C6106234B0
+:10ABF000FF7285E22D05CCDABA8391E8FB13625D22
+:10AC0000CB06162639966221397618FAC77E0FBD13
+:10AC10002E77901FAD40BD1BCBCF5BF2E9FE4D7D83
+:10AC2000DFBD22C580C015083BCAD9C5EF7F69EBDF
+:10AC300059932FD1EB19A4608E3B89711055FC07F5
+:10AC4000A691847A9F913DAF9D0FA65BB472C58794
+:10AC5000E324F7D5E7F7AF92443E353F93D61B5434
+:10AC6000091B4AD0FEF8CD5F906F35F9B075C5CF9E
+:10AC7000483E5C8AFF8207293FC9EEE0F8CF4FC308
+:10AC80007528C7E4A7A1BE6B767A557F44BE0096AF
+:10AC9000D13417E207EA417E4AD5891C25C2FF97C5
+:10ACA0009AAF92B0847ABE0480E390554DC3F53AD2
+:10ACB000C0B8B57CDCD87FECB81E1817EA1DB2C34B
+:10ACC000B8506FBBD51C36C40D34FE1815C7BBDC9D
+:10ACD000B8804E42EA248167E08B20FAA50ED90D98
+:10ACE000C49F93447CEEA1443E1E2BD0C7CFE4C446
+:10ACF000C0F8E46FD5C7CBDC286D6E41BDFC843550
+:10AD00006E1BF2E36F049F1C89FD590EDA55BF9943
+:10AD10009E7718E5CA84F8A52DC824935827C91B27
+:10AD20004DEE5D483E518679907FD7E603DD7F98F2
+:10AD3000F5D674ECFCB0F3891CD47F201FBE979F1E
+:10AD40007829FC1A3F6A70231FE23AE8E3C328F827
+:10AD5000353E62B7745280E116B04B31D5EC54C623
+:10AD60001A781CB89ADE3F3F60E20996063E8FA52E
+:10AD70004182FB46E75A8A371B312CE047B8A68D43
+:10AD8000FC7CA882953D33F2711F06F0D6FCFF844F
+:10AD900037DA2EBF5C3CB40657F43AD6C69726EF96
+:10ADA000A478E8FAA9368A8F1E27E24AEBE71B2827
+:10ADB0004E08F66F64F7D7314B08E5F0B5C28ED672
+:10ADC000E2F47F2571FF6770AF59DD11618F5F1A63
+:10ADD00027AD521C7670098FA7EEB3B76BB9BDDDF6
+:10ADE000A7D7C4BD80F6515C96B7DFAF52BCC4CBC9
+:10ADF00012AF1F9CC1B8BD5E23CAE738443C05CCE6
+:10AE000025A93F5EBDBD8311FFB7DBB3A83C45E676
+:10AE1000FA877D8FEB9FF64C6E4FB6DF9947E5B012
+:10AE20002F1886789F2583FDCCCFE7F9FE20978FDA
+:10AE300017EDA75D9FCFEDB23E3B47E4A3FDB2CF38
+:10AE400066043622DFCF29F20D9580AF6699B8DF10
+:10AE500015F86E33DE89A9620DDB956CBC5FD1F00D
+:10AE6000AE219BF8EE29E2BB42E0BB6C1DDF85F210
+:10AE70004773F98BC254E3BB3E7E2B888E870BFC55
+:10AE80001CFB6977767E5087FB8A2E33D1418B6B12
+:10AE90008C5EE711F09C347278DCB24CF0EC1E084A
+:10AEA0009E2BE1FF487E1BC2389F0FB60E86282CD2
+:10AEB000682FE95F076B3C81308EDBB71E96F37D10
+:10AEC000E42570CB36E28BDBEF9439BFC6727D8E02
+:10AED000E749C9307E8D18FFF695FE4A27D6AB911B
+:10AEE000080F355DB514F7C52AF9B99017FE203C57
+:10AEF000CD42CE69E757D344FB298E1A23FAE3A645
+:10AF000056EBCF91A6D9F839D5ED538D1F46DA3DD2
+:10AF1000D3D8EACF314E711A9E3369F5818FDECFD7
+:10AF2000B7BBE9FC5B65F978CE7458F859CE015F80
+:10AF300023DFBF96386FF3FDC077F94F1695A03F1A
+:10AF40006E7CD282ED6B20FFECA6E1947F2DE9FBB5
+:10AF50000FBC85E55BF3285F6990884FCFD5F2F68B
+:10AF60000565774ECA8C43F92FFAC5F584FBF59831
+:10AF7000407B0DD4F38CC82AC1F8D14AE137387729
+:10AF80003FA3F29B46DA7948EE3C95FC7E9531A2D0
+:10AF9000FC07BCDF3746FD4709C6115766F54E472B
+:10AFA000FE7EA3E4E5E1983F2C7D3E7DA03886C27D
+:10AFB00002293C0CF052E9E2F5AB4B7E9E827E9872
+:10AFC000CA0A9E2FF496AFCCC672C3F9E903DDEF2F
+:10AFD0008D11FB9EBEFB6A625DBFE83B41F7D3FC6F
+:10AFE00016C98B53F48F39417E0766931CE83AF3F8
+:10AFF000FB3215F4738FF3F138D30ACBD264945F2C
+:10B00000B7044CA5182FECB08C3A8C7104F163CACC
+:10B0100047235DC75918D115F83CAE00D6D7B4AB5D
+:10B020003F1F1A87CC65D3F3B9C647351A7F57EA55
+:10B03000F918D6A71BDB5F4EDE0EC6C730FED00266
+:10B040005C67DFD3EB9BBEFEA2D65B74FF83C901B6
+:10B05000FC89948BFD7074D2BA4AC3E8BD6C5C77EE
+:10B060006DDABA1B89F33019BAE99E4E86E41D4E9B
+:10B070001756C7782DA48FA2E0D6E04B07D9C64A51
+:10B080002E850B7F14CD5EE43F6EF44BA48972686D
+:10B09000E763AE7EB860FC1B100F6C3987678BD4FA
+:10B0A000C0E586D81F68FE8C3A6DBEFBF5F32D8B8C
+:10B0B000E1F7D63DE877C276EE51C3BF0DEE7AA137
+:10B0C0004FA75AFC8F9A610EB73967113FDC011AFE
+:10B0D000CD09F3FF5B6AA006F1D12C055FE9C92415
+:10B0E0007F3CC57700BD271744D8011A5CD1F8A86A
+:10B0F0001B441E46C31D8D877EFA742763AADD7725
+:10B10000EB9B57D47CA2ED02B749EFCF7309BF9BED
+:10B11000ABDFCF5680E5D52CC64B7E36AF44FBA8BF
+:10B120006AD0F32847ABAB18F9475C3603F9D9343A
+:10B130007D3F187FDF703D9737D50B99B84FC7E734
+:10B1400011CD5F4358CF83F49E8345DD381BD7ED87
+:10B150007C9B2E0EBEDAC6FDF32B0B24E197EF1974
+:10B160008D7E89BEFC25FEE09ED1283FA6CBFA73DA
+:10B17000AAEA8BDC1FECBA28515AED3D311AFD2C9E
+:10B18000AEAA9ED128871E19EA5B85743D6EE0FE4B
+:10B19000F24BFC160506CD1F7C457C174D0FEDFCD0
+:10B1A0002F26CDBF01C73923759761E1862C713EEB
+:10B1B000C30299C8974E476639FA7140CE7DF30DA8
+:10B1C0006E1EB108F035262310C2767730FF78BCAA
+:10B1D0006BE9AA0A18F97905A3F92F12F31F2FF4C6
+:10B1E000DFF9CD3CAEA2D257F0041E89D41F35B290
+:10B1F00010AD3F1FE9B1FB04FCE741D585B1FE2E40
+:10B200003BE9C179AFCFA27889FC0D86FE772BE0B0
+:10B21000EFB0508CEEDD8AC29D2E5DBEB83345572F
+:10B220007FE4FE2C5DF9A8F0705DF955474B74F989
+:10B23000D1DDD7EAEA5F7DAC4297BFA66792AEFE4A
+:10B24000F74E4FD6E5AFEBBD4B57FFA3BE7DBCD04D
+:10B25000DF415F7701CC7BB6C69F1767EADAFF292B
+:10B260006EC251E4CFD9AB79FC77396048F78E478D
+:10B270001BD7F30DF007E93B9EF552DC5D5D48F20C
+:10B280008619C691E9ED8005FB3B088F97BBF79EB9
+:10B29000EF9E6140D3F78302116F7235BB9AC78D61
+:10B2A0007E3B5DF358CEDF4557B3474F57ABAAA758
+:10B2B0006B6C819EAE76AF9EAEF163F47475FAF45A
+:10B2C000744DA8D2D335D1AFA7EB90697ABA2607CF
+:10B2D000F4744D9DAFA76B7A839EAE198D7ABA65D3
+:10B2E00006EFD5950F466F4D1E66B72ED2D5EFA34C
+:10B2F000BB7F3EC511E5B6FD58D7BF46F720FC41E0
+:10B30000BAE73311EFF83FA47BF2303DBD417FA493
+:10B310000C1B4D7A3F1DD369F9C2BEF60FACF73551
+:10B32000F913A96723F79783C9A54BF48AD86F0E41
+:10B33000AA57A2F69BEF31D07B34C86AF21FDD29F1
+:10B34000F8F3500CC7FB1758740DD4833A6300AE62
+:10B35000F7106E18E7BD9842F20BDCC53A8DD8FFA6
+:10B36000DDAC9BD2E9AC97D20073901E9DC9BC9412
+:10B37000CE667E93F013DC302C11FD073D65A88767
+:10B380002FCC78EB389D2FBD917045EF3D7C88E741
+:10B3900018B98C9D12F2E0249E6740FEAC55F8D39C
+:10B3A0007C4C7547E0ED94F0FBCD1C27913E647218
+:10B3B0000CC559CDBC43227D32F3FFF2F48E61DC23
+:10B3C0001E8D4E9B1B35FCF17DCADA612AC9F7340C
+:10B3D000D629F41E0BD8B2A91F7EFEF0B489F693CD
+:10B3E0001E0B87EF798929635C74ED8CE8EAB170F4
+:10B3F000789E37320BE2F339165091188F2820A22D
+:10B40000F87D87E1C81F33FFEF5B59E82F8B59B5F3
+:10B410007B6AE535783E125C4AFEEA1F30BDBFFA12
+:10B42000EE0689FCD53F003821F538BC1ED4975A6A
+:10B430003E88F0C23C2AB11E7C1FE26990D03FF4E6
+:10B440000FEB6FCF8F79BDBFB3BFBE7E18870B7F69
+:10B45000907E9AFFB1C0C0E3157AEFE7FB94ED3F11
+:10B4600060DC8FD6182C0FE2F9A40C1B4A8C6732D3
+:10B47000F27BE86B8765F2FB6EAC9BF6F9EC8866B5
+:10B480005F0648FE16897B0E67C5F9DEDC0E0BC32E
+:10B490007899A2DD075D789E371778B01BF5B0125A
+:10B4A000A077568A36BEE6E2FE37A313EF2F6AFA7C
+:10B4B0007F703E55D8A988FB02C0770D03D91F7B4A
+:10B4C00086F373FAE6A6EE61781EA7C1F370D35136
+:10B4D000CACB8A97E20CF11D2667447B931BCA23D3
+:10B4E000E49D6283F61172C868F3D36326CB9BBADE
+:10B4F000E99CCF28DE8B5A91B6C81188D8C7BD30D9
+:10B500008C8FCF2C41E64862C204C754398572ED56
+:10B51000AF8CEF67CD1EE827527E5E4C64917EFAB9
+:10B52000D6A66304EF722910C04ECC392C6C05FAF4
+:10B530009815BC730BDF37DE7814E3A94CF645DEB3
+:10B54000B03A38DECC1EE542A43C7D7598D8470B56
+:10B5500079FA2F4DBD85384E73538F862F86E7A617
+:10B56000C1647E8FBEB9E913FA6EA85289DF5EDD31
+:10B57000987F5085F2E3F017DFB531BB395CECA260
+:10B580009BF4EA74C107E8134B07FE39DE68243EDA
+:10B590005B9C6E237FFDE237730FFA603D9B60BAC0
+:10B5A000F27780BB7F1C8E279390A7C04F7E940FAD
+:10B5B000A61485FCF62EC764A2D3DFDB9F865F93BB
+:10B5C00095D17B44A6741BD905570AE7B9287D0598
+:10B5D0007821F9BF58E0457B5FE9F8038CF60B8BC7
+:10B5E0001FE2FEBBC5B58CE2FD5923FC94F5F38D3B
+:10B5F000A66712F12518F8D8D6042B0EBA78ACC974
+:10B60000C202F96087607C7C763F1DDB7C8A138FE9
+:10B61000FAD754BA6B307D6CCCC936147F8F8FFD4E
+:10B62000B21B53F4D5E3F88E061642FB98CEE061C8
+:10B630007CE77CC8C3F871A23C2EC0F3F1A23C7E2B
+:10B640001ACFA7FB5E902A11B0A873A5749B6B62FA
+:10B650000ECAE9D98CDFB716EF2D6C11FA22D5E6A8
+:10B66000AAA9C4F2BB19DDBFD0CA9F14E5C9B60FA1
+:10B670005BB3518F4CD5B7DF28F030C4F661DB38AF
+:10B680003A7FD2976BE73B89B6F347A97D91BE7CA1
+:10B690009D686FB79DEF1E87E539FAF11F15E5B17B
+:10B6A000362E0F999FF1770144F923A2DC8AE53801
+:10B6B000BE9797CBDAFB17A2DE4A0107C6B691FF09
+:10B6C0007318F77F6E6DB214115D9A2E127D1E6B8A
+:10B6D00062949F34DCC5EF6557717CBBDC9C1F1CFA
+:10B6E0008D6CC0F700260DE7FBAA38B5C7E71B40F5
+:10B6F000EE69E52E077FEF40F698889FCC3621371C
+:10B70000C47AEC931B5283973319F7975F8EAF611E
+:10B71000A15D40FB6828FC205FA73D60608108793F
+:10B7200099B230860522EA7B66BB74F9A4BB5374D8
+:10B73000F5DD53B374E5B6D2E1BA7236D545EB66A2
+:10B7400091E0AF98A2125DB9F60E03DB2EEA89F5FF
+:10B750006BCCB95657EF7C811A8F3C7E6A22E81F6A
+:10B760008A2BF05A503E2CB2670D41FDF35CD31882
+:10B7700042CEF3B0AEC06865BB9C3CDE7C179EE356
+:10B7800041F9BF36F9E8FB0E2857217D1AD69D0AEC
+:10B79000F53B9A1C947FAAC943E9962695D2279B2C
+:10B7A0000AA87C639397F24F40FF98AE837EF0FB2C
+:10B7B000DAA62ACAAF69F253FEF1A669947FB429CA
+:10B7C00040E9234DF3E9FBCAA606CAAF686AA4F4B0
+:10B7D000E1A620A5CD4DAD541E14F4DE25EEAFEE4E
+:10B7E0002AE7F7D2A3E9F8F07049F75E9CBD3F7EE7
+:10B7F000E4E1E1183FD2D94376B8163F82F3A6FEC2
+:10B80000AC7CFED1FD6D1ACEFD09C359F7D258BEEE
+:10B810009EE99C3677BF77592CF07D6A03A743E6F3
+:10B82000FE5E2A4F9ECF69B149E865E60EB2B4329A
+:10B830003AADA77A67A5EE8A587EBE4DFE0CE6812A
+:10B84000799689779288ED4206844B19C3F5A7460D
+:10B85000D7BE793B399C38FF81E0DD21E0954B3B39
+:10B86000F9FB27556D6164FB185F03BD7F6299E6A4
+:10B870000F2B90BAFD017A8F61F8C509B0390379B1
+:10B8800073F17AA6429AB650BF6F4B995DA2DB174F
+:10B89000C9171F632AC8015B917E7F1593B348D7F0
+:10B8A000CE92F6635DB9C9BD4C573EF3BECCE51EE2
+:10B8B000C4672A3FE731AF5ECA9201AE39ED6B082B
+:10B8C000AE77041DCF4A2ADDE30EEED6E21EF8FE67
+:10B8D000E259A15F986535D963F94E9ECD8B0F1A59
+:10B8E000503F7CF66FF124979E79CA10427F2E88D4
+:10B8F0002703AEFF4230FBB0BC98F5501E435630D4
+:10B900003F8AA932E6AF62BDB4BF82FDC5EF866350
+:10B91000FCA81C78CA0AF933E9816779FC5A98F4C3
+:10B92000679EA0679EB69FDAA044FB79DF1A4E7C23
+:10B93000A8BFC7D622F6172D56EE7F5BEA2C1B82D6
+:10B9400076EBD941E20DED9E578FCC067CDB930F51
+:10B9500052AA7D7F54350C784FFB8F51FC3F0C98D9
+:10B960005DF0FF1F119E33A56F27A11BAA2EA7977D
+:10B97000D6C159C9E79981F87D5DE6FC083B2E9C4C
+:10B980009F22F0ABEC2EF7CC003C2A6F667B83AC99
+:10B990007F9C679A8E65633C8096CF13F1B23B9B88
+:10B9A00092732A23BE3B0B393C05ACBB0AF55541CB
+:10B9B00091C11BC28E7D0E9D1FC39AD3E6C377072C
+:10B9C0009412E64531378CB52D43DDADFC4DA6789C
+:10B9D00027E5D0354C85FD8CCD1666181FA6F5CB16
+:10B9E000843FE4012137BF7454C6D37B92297DF292
+:10B9F0000F7524FBD2E6EB463EFAB2DDC8E7754888
+:10BA00005F5E60E3715C730B4C2155C2F7CBDAE8E3
+:10BA1000BD4465ABC4D232118E718407B62F96F83F
+:10BA20003076C3081684F552EA0CFC05F9E44C584C
+:10BA3000DD67C8163C09F56A0B4DDBD03ECB47BC31
+:10BA4000D8102F77E654E2D0390584DF3962DE79E9
+:10BA5000857CBDB6A447C1C3BC3E7C57746EBBE6B3
+:10BA6000C7D1CFF3D1D28A5BF1FDC5E66E99ABB5F4
+:10BA7000287CAE32768F98015D9FE901B8648233ED
+:10BA8000AF10E5C2863216243DCEE757FB94C4368C
+:10BA900065925CAA223D3EDAC022CF31B5B4B8909F
+:10BAA000CBDF9786F3F7DAEC9E23C48FFDF9C3470B
+:10BAB00066033E9E33B0023ABF35F0FDB116372320
+:10BAC000A31F00D29F146AFED2163609F5B6D340E2
+:10BAD00071A072470CDD4F959D0AC59FB7D82A1DEE
+:10BAE000F7623F0E85CE6B26C863BBD18E363B0D09
+:10BAF00057A11D7E78DB8FBB317E474E5718FABDAC
+:10BB00005A1C0AB743D20C1497A7382B2D78BE9332
+:10BB1000673B598EF83CD8F1437A8F417E50C4CEB2
+:10BB200008BF985190AC853550FFC13445BCEBE25D
+:10BB3000AB1E95248E2654DC0F557D82FBEDC38E03
+:10BB4000F356DC17A8B6B9E40FAC2BE4FB44239EF4
+:10BB5000E341FEA925E79D28BF5EEF58EECA447B6E
+:10BB60003AA4902D52F075730ABD3BD061A27711B3
+:10BB700034BC660415DD79607AA33E6F8E3A1734C3
+:10BB800046DD479B85E3939F781A0B47CCC7E8E1D6
+:10BB9000FB37E6B6D1FEA7AE50BC8729F273300F53
+:10BBA000A4D8690CA678013F873AE666E0BC2EBCB3
+:10BBB00014A0F8EFC1ECFFD242558C17B41AE8FD7F
+:10BBC000DDB015E3C1B737312FDA79969042F1F83D
+:10BBD0003B843CCBB171FEF717713E8F4E73DAF8A0
+:10BBE000BA5376C58462916E8ECE9220ACF3C25762
+:10BBF000273215F4608EC367407F7C4EA3C98BF655
+:10BC0000E7845FDA884FCEDB783C95D2F8888ADF0C
+:10BC10009BB7951544DEB30B3539BC289FB6355913
+:10BC2000BC18A31E1A44BE663B0D14C7AE1A785C3E
+:10BC300065BB588FED85B194AE1572E6692538194C
+:10BC4000E17C1AE889F1F3075773FB78D1520BC1F5
+:10BC5000B1E8F56CB2AF06C3DB334D1E6F0EC2B355
+:10BC6000DA9082FEAAF29539ABF09D8C4576FE8E75
+:10BC7000B01C3F9CFCB6EC774686F67C73DCB5DEE8
+:10BC80005911F25D8E1F5B807C25CBC114F4E7FC5B
+:10BC9000BCF0DC6D18570BF4DB84F9DDCFFDE13629
+:10BCA0008CA3DD690FA6609CED4BCFBDCFCB13837A
+:10BCB0009B30CEF6E073C779797A30C500F9D79F0B
+:10BCC000FB9097E7063761FEADE74EF1723C030348
+:10BCD000D9F9DE739FDE16447F8BC93B1F05F22F17
+:10BCE00000FE2258629D22FD40E0452B7F01BFC32C
+:10BCF000066C8F48A3CBF78976FB0729FF9528EFC1
+:10BD00001AA4FF03A25D7890F68744BBC383B43FB7
+:10BD100022DA1D1DA4FCB7A2FC8D41FAFF77D1AE3B
+:10BD20007B90F66F8B76EF0ED2FE0FA2DDB141CA8B
+:10BD3000DF17E5FF19D5FF7151BF477CCFB2AF7E4A
+:10BD40001FFDF7592047502E15D857BB709D6F6BBC
+:10BD50002D25FE6F2EE3E7541ABF67498CDEF7AD41
+:10BD60002EE2EF8A551771F9FB67D13FF0E1E3C886
+:10BD7000778BDE9429AEA7D9E03D1D4239BACA407F
+:10BD8000F6C0A2D7F97E7DD14A2514792FE7CF518D
+:10BD9000F02F47F880715B3085F576A690C7F59B4C
+:10BDA0003D1E6F75843C333AF47990170CE52EC82C
+:10BDB0006F8ADF2E5859D15A00F95497812C10A55B
+:10BDC000D612C6F73A14BBD00B8ED2B60284CFA6D9
+:10BDD000D03B059A9C67368FCEAFD16253E8DD36F3
+:10BDE000D9CECB27FC72AC03EDAC1616E8F6617B1E
+:10BDF0008F4276FCC1D61207CA3D937DB603D7EFBA
+:10BE0000BBC57C5E9575053128AFE5470D24BF0F96
+:10BE10003BF87ADFEAE1F14EA057E89E13C86B2F9A
+:10BE2000EA887C165E8A7273E763FB66703F1FB315
+:10BE30008F2AA37B44DAF9B6A444EC03AE2BE2F8D4
+:10BE4000C9107A4441FD02E9D3A5E2FE4B90FBA361
+:10BE50003214E6498DB8C77B5D91CCEF1F2988234A
+:10BE6000E84BAEA6F7AB862E5174E708690FE8F3EE
+:10BE7000A628BDA144E995EC569093BAF313872EFA
+:10BE80005F5424FC3C5EE6453B76C22F57933C3C16
+:10BE90008FFA4D1A5CEEF5C95F218F9F4604A01CF6
+:10BEA0000DF27BE4075797FC16E9BD68A581DE8D8E
+:10BEB000BE5239FA678405F0901B90482FC0845217
+:10BEC00070DF74393CE41AFD2E7A57E332F8C85D0E
+:10BED00057EA42799B1B50A8FF4BF4C665F0F5BCAE
+:10BEE000E43D16403A3A63845D0D0C807E3B574C2E
+:10BEF00007C6179B843F458B17568628FC5D7C71CF
+:10BF00005F55167CFC30F3A9AE6C7C17A881FCFB56
+:10BF10008B773FE041BB7D8521E0C0FC51D7A45E1B
+:10BF20001C67116CFA117F3BB10F7A1FF3B7B7FB97
+:10BF300000FECE90497BBF328CFFECC63820ED7DF1
+:10BF40004C0FD96BA2FEB5B75702DE3B1547219ABD
+:10BF5000A04B775DB7DE781DD437B1BEFA78EFEE2F
+:10BF6000B9C306F17EE6B8F595209776C730DDFBBC
+:10BF7000A0BBD1CF4EFD4D588FEF81C27837C9B0ED
+:10BF8000375B5B74F37A5B723F3CEB8AA7AC5F8AEA
+:10BF90000E3BB14F7132FEAEFB19B5270E970FEC79
+:10BFA000577E5204F4ADED389914B95FD7EAC78BC8
+:10BFB000FA755DBD75BB54AABF94EAEFEF8D2B22D5
+:10BFC0007CF79645D68F137E8088FA2BBEAD7E8196
+:10BFD00006CFAEB76F2FE2F51FC5FA67D59E248A4C
+:10BFE000AD898227E1D2FED77E5BFFC345FD33E1F9
+:10BFF000B7A9FE59D693549C49ED3661BB736FBC0B
+:10C000005D26E69D84E738EFDA7C4F16815C6AC0D6
+:10C010003ED07E561A54FCDE696973A0FD6635B6C3
+:10C02000F9510EE7E03B5F63FAD3ADA83C465FFAF7
+:10C030003D9A9F3B2D2CA11AF9B5D140FB9BFD3DAC
+:10C040008647902FB7A68D75E0FE79B7A9BBA408E7
+:10C05000EDD7BD36B25F0D199F59D16F6ECEE7EBAC
+:10C06000DFEA6CF01641DE9A5E44EF74CA0F2DEAE7
+:10C07000A4F7C27FCADFD1527E660A6C477E0C2FBE
+:10C080002A9813B1BED7151B09BE95AFD956E3FE4A
+:10C0900060A5D1DB968F76B85DA1F84BE567FB26EE
+:10C0A000917DF80B0323F90FF3AC807E5B6628F4D7
+:10C0B000FB0E4E14CF3C5844F8F0FB2BA0DED044CE
+:10C0C00045C27B3A0F2B7E0B9E7798855DB7D5CB0B
+:10C0D000EF6969E37E2CECCF8F8BF8BBEE5BD32E40
+:10C0E000BC37CF8DEF3098E87EA56DA1216C8AC357
+:10C0F000FB66DB4ECF437AC6F6ACC4FBC631298A59
+:10C1000003E7F7643594D1B95C277D0FD61A68DF51
+:10C1100090B0D0E043FF634C8E49E7EFB0C1389157
+:10C12000FE906F8A03C710EEABDE546E423C7BEE8E
+:10C1300037D03BA48F7ADEB51800CEB8527D7BC7CE
+:10C14000587D7B57A5BEDC5DAD2F4F9AAA2FF7DC3B
+:10C150006D8AF2EBE8F33334BE029960033D15C3F8
+:10C160008B588CED4213EE7B56BC16C3883E4BD6E3
+:10C17000B7E5E3FA8CED257CC50C8F21BFC08A643E
+:10C1800013C9F515C5DCAF7F28DD7413E5615EC802
+:10C190001F5BD38ED07EE412BCD84E7F8DFDDB5862
+:10C1A000C477B4338A7D7F291ACDF39E32F4E3310C
+:10C1B0009287CF4B3EEF41C4F75BDC5FB1B591FB9B
+:10C1C000B11F9DCAE311690665B8DE79FD38CBEA77
+:10C1D0006EDC97C5D95AEFC738CB68BC2689F38681
+:10C1E000AD78CB16F92EC0DF675EAEDD77C2EF65A6
+:10C1F000747B81DE1F1B3F82F38B53D809F19E8431
+:10C20000A296887B1349C26FF2F8D89956D41FBB07
+:10C21000C57B1E7DFDA934280F3D45BF72B124F6B4
+:10C2200053BCFD7AED9C47E4139D3CBFFBB0EB266D
+:10C230005C5FEBA7BA4A70BFBF42D877F16926DFCF
+:10C240003098D7DAA3A6A03412F20A3B6C04BB6084
+:10C25000B78B8F6B7A3D2688F7F3D67A4AE9BEDF33
+:10C260007562BC17CABDEFE07AEF857584715F6BAC
+:10C27000DD5E6B8938370D027C685AE03EE56075FB
+:10C2800009ED77D7FABC56D49B6BD3BC568C97B6C6
+:10C29000262B0E8C077579147A8F6DAD25E040FB47
+:10C2A000C7058AD484E749E96D13E99E1BE0DA509B
+:10C2B000C68F1A988833C438BF0481CFAD9ED90E7B
+:10C2C0007C1FC19DB3E747E8A74FC0FEE2783BC49F
+:10C2D0009353E0697CB14A70BB45FF09B35FA0FA94
+:10C2E000F8D35216D19FA0A369220BE13E4D1B5FEC
+:10C2F000EBA7AF7FE6A37380E5BFE5785B9ACEDF5F
+:10C30000A132DDC7683FF742796027F2596F720C9E
+:10C31000C9BB144F4A05F251CAD14D93F1FEC3F285
+:10C32000DFC6F071E6707E4F5198E57A9C7762C067
+:10C3300081788C5EAFC987DB6A902935BA44AFDF5C
+:10C340006485B5CAAE4BD771B2C75D91376280F5CF
+:10C350001CB55E928FF63E88FD47AFEB2DB1C74707
+:10C36000713D12F15DBE7CBE45EA5949723859A152
+:10C3700075961E351EBE6787798919548C4F5E5796
+:10C38000ECD4DEAD5211AFBB4D8E71367EDE4EFC6D
+:10C3900055F1E2EABB7E07F90BF87B73A056EAD1B0
+:10C3A000B66ED28BFB03F9587FB312780AFDE99B76
+:10C3B0008F0DA17722CDB1FC9D4F53D4BB259ABEE2
+:10C3C0005857CCF7316AD4FB96DF35ED4C4B2B74C4
+:10C3D00000CFAC7BFEB77FB024FEE3ED9FB4C39DDE
+:10C3E0004B6DB0A6B7ECBA653DC6475ADFE4E59B96
+:10C3F000211F54102F0BC9EF7268E8BD34FFE6F718
+:10C40000CCE4CF2A96BD1B30CF3EB0923F6EE7DE24
+:10C41000B1D3709D34DBCB54B4F79F11F267BB5896
+:10C42000CFD1F3924DDE00DA03D1DFB7168B73095B
+:10C43000E63DD601F42D7EDA44EF25F5C547745864
+:10C44000F9EF331376E86C21CF66EF5B35F420C348
+:10C45000F7306AF615C3B8B3ED9549084FEA458938
+:10C460000540FE6D16E7B3A9EE1724943369EEC3B9
+:10C47000E528EFD359F752941BE90DFAF3B2D48BA8
+:10C480000AB5DB9DE2A3FEF007EF399B9858D3AEC7
+:10C49000005B8A723E859FB7981C31FC7EBAA7521A
+:10C4A000779F597B47F655810F13E0D45802A94D69
+:10C4B000E1F7E7A3EA1F15F892D16F8FCE7FC791FE
+:10C4C00063D4AF4DF92CF25D16DC9792D05AC8CFE9
+:10C4D0003F014F41DC87B278173F2FF5F9D4C8B838
+:10C4E000D65490BBE6128C3F09529C48B2B89FA02C
+:10C4F000C5F500069CE877D3E23EB631BD3DA2A566
+:10C50000DAFE3CA751A67D47E1AB56BE3F686521E8
+:10C51000AB84FE3046722767353F9FD6FC62D5B8A4
+:10C5200098683D380C3CFEA793E29935BB0AE84B6E
+:10C53000726765D47B4FDA7BD55F88F5B4B9C941A2
+:10C5400074D4CAD302D174D49F736AF5522FA6B2A1
+:10C55000404264BF21EA37B5710FF143EAC5A154E7
+:10C56000BEB949BD4CFF5983F49F4CFC3278FF693A
+:10C5700054BE25FCAEF31640C593BD7B9C7E15E5ED
+:10C580004A78A277003CA73EA0979323F7EBE5AE4D
+:10C590008697CD8ACF5D03F8DEFC80C1DBC130FE1B
+:10C5A000545FAF2AF3F74EFE7EB4563FEC9E82F501
+:10C5B00017F2FADF3BADAFEF2FDF1B5D9FE0BBE172
+:10C5C00062947D18459F687801AEC4DB22E01A674B
+:10C5D000D1FFFEB869332E812BF18E08B86EF4E8D6
+:10C5E000EB07960E0CD74D05E66F854BAB77EB98B6
+:10C5F0002BAB173D8F2955E641F0CEEBDF31EDCA6D
+:10C60000FAFDFEFC6FAF774F63F43841EDFC4867ED
+:10C610008F243472FBDDC17A29CE44B33B5CCC213C
+:10C62000E2BFB8DDF00EFE17F6B34B46F86F1D31D2
+:10C630001AF1EFBB7B9D8AF754B8BE62D5FC7D48EA
+:10C64000D8971447BE7FDD0FD732EAF7658C772283
+:10C650003D6BF1A2DD5998CA2CC9687C794259F822
+:10C660000ED8F4119ABCE6F1E5C305EE9E4FE95CE5
+:10C67000E4A4751E72213CDF75DC7B47F8E68C482C
+:10C68000ECAF3F98BF45C393C9D449BF3FA1B7D6CC
+:10C69000E645FDF02E1641BBA76F3787D1AED6E237
+:10C6A000508FC54E3F92A8D2FB038BB1FF69774CE8
+:10C6B0005C8E79E95082BAC886F7977AB47B9E3F40
+:10C6C00042BC2DB40432920C74BE9A8FFB61E64FCB
+:10C6D000109782FDC503C56968F0544A1CFF316993
+:10C6E0008120F65369E8DEEAC76F4A37DF673B12FD
+:10C6F000F9FB47F8CECD00EB5FC34385E8E7A0D157
+:10C70000FB552FCCEFE09A78BA0F3F3BE18EE9F86A
+:10C7100036CA1C833F090FD023E07E8CE0B6CDC81B
+:10C720004846B88D026E4BA2C0BB2FE7DBE0EE8B14
+:10C7300097F9A9A4BD534EF917834EBA776E367C8C
+:10C74000F1EE14D4C3C5062FDA9D9BC1BEC077D6C7
+:10C75000FE8FC0F7163C6371D1777A7FCD23EE5FF1
+:10C7600079D61BE8BD157FC54B44A7A7EB6C5EDCF3
+:10C77000B7CF602ABD6F3A4BDC47F963F97FBFD270
+:10C7800003F3DB3522F02CD2E79E04C3D077098E69
+:10C790004021BD6735F6CAE267B573F8C9C23E9855
+:10C7A00023F03885F9286EF7361630E2B86F9F35DA
+:10C7B000F9D02E7D5BC423DFC182F4FD4E16A2F4B6
+:10C7C000FB2C4CF57F802FB742FEADD811E98D00D0
+:10C7D0005FCD13F9B9B81E23F0FE8AE0977BDC9C8D
+:10C7E0005F3E1E82786F4FBC22FEAD9138FE968C64
+:10C7F000081CC1798FB3A86E2FC2E41897867E9467
+:10C80000BEF55399C8F94F71E47EDBFAE93EAFDD1E
+:10C81000BBF7D992CBF0DD2DFE73A3EF3E8A17C78D
+:10C82000B87C37D0A15BE5F70D416CD88340A7AA4F
+:10C830007299E2F6567C2EEE49A31303EAFD669444
+:10C840004CEF8469E792B788FE6E49E3F706ABCBFD
+:10C85000A7B4C4035E267CD5531A86B42A4D7F8FB5
+:10C8600070A2BB839E0E9F94A3FF7E136BA303E273
+:10C87000EA227D9CF92D51FECF833836F0D527234F
+:10C8800044BCE470363CF2BEC1ADA2EDF9EA2F4CD7
+:10C89000E760FCF491815EC4E3A29BFF389DF675CE
+:10C8A0000A7BF32A985FDDBFCB644F7ED80433C97F
+:10C8B000C7B86A0BF381C17F0AEC0ACC9F6EF250B5
+:10C8C000FA29D801987ED65440E5679BBC941F3F57
+:10C8D000D2FF17A4F3CCD6CF15D4472BB4786C0174
+:10C8E000871657B842C44F2CB62F3A86F10B8B29C6
+:10C8F000E09DC1626F9B80E0DFBBBFF308A6F05DE7
+:10C90000C67DC8E23512F975E61C0E2C4732CF7B86
+:10C91000A3E7161413A37F7F3209F7E9B568C702AE
+:10C92000EB2F76F92C23617C5FD789230950FFE335
+:10C93000A63104DF274D3E82EF4F4D55944E1FE93F
+:10C940008FA37AEC737A6FE9E65D2714FC3D68E308
+:10C950007D12F9EFAFF7B15008F0BAC1C8E5FB0698
+:10C9600090EFB83ECB8B276F7900E11B11F08C0460
+:10C97000FCDDE69A353E01BEDF32668682F5EEF8D2
+:10C980000A7450663F1F5E8EAFCF1C90083F670E43
+:10C9900038091F1A9E6A05BDCEEC2BBC15DF1F3B64
+:10C9A0007054A6F8D3F3170D04DFF96331149F1AFE
+:10C9B000DD7ED1DEEC21688FFD09E887071F8BF64D
+:10C9C00016923FFE4FCFFF488D8CFBFD93ABF3C219
+:10C9D000FB28A7FE8BCB29B0374F6D423996964284
+:10C9E000EFE8F4C5ABB18658D4637526B1BE40CE2E
+:10C9F00060FE4F317C1F5CF68BD40A5C2F381EC65C
+:10CA00007B99C5EF9B80FE8EFF18FADBB7C943EF19
+:10CA1000EE7CB6FB892C1C7F67E79CF73741FF67EC
+:10CA200042FCF74D9C619D677F85F274BB8DFC963F
+:10CA30002B24800BF5E98E14CA17484A4C2339334E
+:10CA400042B46E0B2455C177C816BEB03105F90B40
+:10CA5000EF8B635CFDCB6B62494EBD6CF41E6FC403
+:10CA6000FEB6F0FE9E7DECA10FF763FA686DC94338
+:10CA700090DE3ED245789FFD2F0B86637BD0D7F4A6
+:10CA80007B959F7B510AA31FA4B8FDE0328C631AEB
+:10CA9000B9F9842105D251DBA5664C0BD3271D457E
+:10CAA000FFC1DD235582E3AA5D9932C6A60F4F0967
+:10CAB000BD7F038F1BD1E9F7A2F6CF2B709BA9E9AD
+:10CAC000F9E152E7A71DB82F1E7AAC84DFEFE2EF41
+:10CAD00044EFED9AF2CEF719CE032C08847B8689B9
+:10CAE000E22E5828D881743E1328F0D2FB26FEE0AF
+:10CAF00046E4AF3381247A4F7A9F211887BF2F29CC
+:10CB0000789CFF5E9F17B7BF1587F114F17B8C0CE3
+:10CB10007FFF74EDA8DE09141F92AED27E3C7DEB40
+:10CB20008D55889FBA3D7B3BA89F85162FFA63E7FA
+:10CB3000EFFD82EEBDB0893C0EF5CC1E9E7FA4D2E7
+:10CB400047EF8ACFEFF833CF77FB29EF97839974BC
+:10CB50007F6216B7779E10FA8CF58C6091EF1269A0
+:10CB6000F47A048AB17C43663019DF9FD2F420E85E
+:10CB7000AF265C7FE876A4F68E29FCBEFA15EA2F74
+:10CB800093D0475A7F4F98F87BB92846F0F7CF6C7F
+:10CB90003671BDBB03E40DF28BA67761DCC7715C17
+:10CBA00093B82F930A4A7614CC27F5093397DF57A9
+:10CBB000387EF4BD52CD0E9996D04CF7473F4B0DC1
+:10CBC0003C89F241BB47CA142FBDEFF741AA6FF36E
+:10CBD000C8D1FCDD0C9C03E8C510D6AB93C18ECA4E
+:10CBE0008EB0A32C57A617FF96EA7B06DB5F69FD84
+:10CBF00068393C56C0BFD86E203C2C5E67267FD873
+:10CC00005871BF74ECF963B1284F16FFB984E44A38
+:10CC1000336303E2E795261EE7FD6BF423407ADDDC
+:10CC2000973D32ED470E1B161E01FD4A2090FFB0C6
+:10CC3000B739BE94F23E24F7F55F1A06DC2F6A2955
+:10CC4000D0EB359C9FEF2BBDFFE186AF1CF4FB2999
+:10CC500099CD7545F3EE7F67473F7FEDBD2B985F1C
+:10CC60000FEAF7C59F1B887F177F5E4272B3EB0AFE
+:10CC7000E76B75FBFE03E91A3D1F80FFBF0682BF0D
+:10CC80008FDF7BAF0CFE072546BFD707D415F9B75A
+:10CC9000BBC47B025D0B8AE85D8B7DF82E08CACD94
+:10CCA000C9FCDE5117F60DF5BB121DF4EEC6CB46DE
+:10CCB0009E0FDE29DA8B771ABBEE4CE1EF66981BEC
+:10CCC0007E578CFD37F3F8B82E63887E1F6CD74FE4
+:10CCD00013E83E81163F7E4CC8ED6629FC7D7A0F35
+:10CCE000E47313E3EFEA8553EB4BF11D90E154FF3E
+:10CCF00098F8FDC957FAAEDE5D823EED1DA11DEB31
+:10CD0000018EFF07358A15A9008000000000000091
+:10CD10001F8B080000000000000BED7D0B7894D500
+:10CD2000B5E8FEE79F99CC24936412421E8484C91F
+:10CD3000831024E0E40501421820A1A8680308023A
+:10CD4000C638212184BC0848CF492D3583090F15E9
+:10CD50006B38468D8A3A58A0A0600705440D9E01A5
+:10CD6000D4521F35D5EAB1DA6202880F1E0941FD9F
+:10CD7000B0D7DBDEB5D6DE3B33FF2451DB73FDEEEF
+:10CD800077BEEFA65FDDEC7FBFD75A7BEDB5D763EB
+:10CD90004FDBBC74BBCBC6D80895357832186B4BCB
+:10CDA00072C44542FAA1812DC6FC9F19FCC531F61B
+:10CDB0009881B9CC918C5D655F166D1FCE98F38616
+:10CDC000103D0BC742479C92C3D82315A3D9DD0A57
+:10CDD000645B1F622C9AB1C526467F4B83C326B085
+:10CDE000ABE99F0ED344C616F2CF6CC9F29D66A77D
+:10CDF00005F255E66E6502631F54DD196A83F1166C
+:10CE00003A556F501854B8B1C8D195CEEBFE2319DE
+:10CE1000C775D0B8AC6218639321D57BCB198CFB56
+:10CE200072AF89DD9D0475F06FBA2F65CCC518D43B
+:10CE3000FFCCCCC7AFF3CCB8FF8CEC0FFE5F65B472
+:10CE40006C56C2B13CD1CD60FCFD239CA3EDB98CE6
+:10CE5000AD3A7CCDFD674CBE7A15CB8BD298CE37E0
+:10CE60006EE03881E335BB752E038C37CAB420E3FE
+:10CE70000C346986021DCCD3E531BB7726E1BC7B3F
+:10CE8000FFBC02F2CD8BAFB2DF0DD939F34D0E25C9
+:10CE90008AB1BE0341EE2005BF073B705DCD47421E
+:10CEA000DD3AC8DFAA70F8372B8CBEBBF61BDC3B23
+:10CEB000E15BADD1BD6717B4AB7D79AC1D4666872C
+:10CEC0008CF01F2C7F31849787399236E460790C7F
+:10CED000E1F725832D9CCA7FAF322A0FF6A64500C5
+:10CEE000BC1B639DB310AE238200FF16EC977F3FFF
+:10CEF00089EB00F89C846E11BFAE8650EA9789BC1E
+:10CF0000F317C3DC77D37A1C71CB317FDB385A8FB0
+:10CF100013E701F362F50AADF7A4D57D571A949F84
+:10CF2000EC184EF38812F470B2F8EBB72641BD93BB
+:10CF300087553BF6F99746D56B0CC3728E0F65BECD
+:10CF400029AD1DDA9D7E31D41E04E525F7D5BC89B7
+:10CF5000DF4BEEAC9B4B69F5BA1B18D4EFBAF3A3C9
+:10CF60004467C6407C94D4422B3F3CAEB23B4A114E
+:10CF7000BFF7D89D65B8DE55195D950CE8EAA2B1FA
+:10CF8000F371A632F6FE4867057EEF79E1D35DF8CE
+:10CF90001DF094563C1E96A1073A41FAED9A407452
+:10CFA000BD4AD0EFB04C6735F607702C65298C85EB
+:10CFB00064741A711E6CDDF01F44275F74EC3CA48E
+:10CFC000C03835C11DF594AAEE09D8CF39C51BA6C6
+:10CFD000A4101C9DB8FFCE5BBD61880FA70EF28028
+:10CFE0009F9ADDDA75E19F1EE65583FF8076351E38
+:10CFF000D561C6FDC3DC469C7F0D33FAEA27F17D7F
+:10D00000887400FD3C49FBD5F297D25F001EAAF759
+:10D010008CCDBA1BF0531371F85753A91EB493FB70
+:10D02000451D9897EB19381FBEBEF3621F9C872FD2
+:10D0300006A49FBD419CFE19A78F8B7BE204FD7067
+:10D04000BABDB8678C1BE7132DF6CD45C5A50BC639
+:10D0500076BF64F69D302F66F74C9C371E67EF99BC
+:10D06000383F94B10715CE9F6A86792622BF92FC7D
+:10D070008B993C13E641394BF74C980FF55F12F54D
+:10D0800058B1278DBEBB3D69D8FE908E55213CE539
+:10D090007CAA9F8EDF4EF030F1FD5AFDF438828F6E
+:10D0A0001CA719F94838A6409F6103D7FD5BBBC296
+:10D0B000F77FE8C418E46B43E13F3D765806B2922F
+:10D0C0008B4B8CB73AA0DF31ED464D3FB2DE58B7FF
+:10D0D000F6FB61D1FFA8007C8E507B8F06C17CD906
+:10D0E000AF014E6CE078FF89ED804E9F7AAA1F7FDA
+:10D0F0002AC72763364937368213C7D39F8D124F0D
+:10D100006BE3815FD7204C927DF03A94E98C8F8459
+:10D11000F422E661FE8722200F69BD80BFCC4BB8A8
+:10D1200007D2DF9D7FAE8CEF82F6E7ED3A9A57206B
+:10D130005CD703FCB0BCD9C06E2D86F65F349D4829
+:10D140003963F0ADE76C93C301474D7FBEB23DD369
+:10D1500084FB6EC5B64CD3323FB837EFCE3E610389
+:10D16000BC9EDFADC79158B3DEFDAB2951F85DF52C
+:10D17000B818959B1C380FCBB13F60BDCA6D1159D3
+:10D18000AACDD77E457B91A3C20FFEE3766BF1312A
+:10D19000DEA3CD5F7D589BFF1AB95AEE3FDF2ED339
+:10D1A000ABCD679FD0E63FFDD3DA45B80D9ECFE308
+:10D1B000FBE63377A8DB0470ADFA68F6093C473F1D
+:10D1C0003BF47C18E2ABE6AF15AFC5335C87964EF7
+:10D1D000018F8A1ED6EBDAA510BDAC7407EE5FC1D5
+:10D1E0003706ECEBF5B41EDC59FE741388DF73CC04
+:10D1F000B3C801F455DBF86ECA996C98D75C20640B
+:10D2000098CF64CF5623B30C1C6F28FEC12C0E1B85
+:10D2100003FA2BCBE365531A67B1D3D01FDBF2C7F8
+:10D22000D9B85FCBEE5148DE287B6ECC2B4837DD7A
+:10D23000FB975C4BE9A239048772E630223F5CD150
+:10D24000A17843216FCDB31DEE8276CBDD8A1DE739
+:10D25000BDAC25C8C7CFE0FF155B02E6D1E6570E8F
+:10D26000F35F71F8E8370AF45FB54DDB6E25C00B4C
+:10D27000CF8FEA1DFF08F2FF0E8210C16B4AC776FE
+:10D2800015D7BD5CCC5F9E7FCC55C0707D537813A5
+:10D290007606FF03E746F028676E66AEEF1C9CD269
+:10D2A000C6DB03E32BC375D7598C365C779D897930
+:10D2B00043603E27428D0E2B7CBFDC1E4AF2436545
+:10D2C000107399B22865E62C6C670FC77667DF5636
+:10D2D000494EAA03DE43FD3CA1B89BB11F55E1F9BD
+:10D2E0005FF3FC4AE6A5F520DD38FCD7E9D6E65920
+:10D2F000EB30924B6AF5DEA308976AD645F066805C
+:10D300004F878423C0AD16D6F94124CA5FDAF6AB45
+:10D310009887EAAF3AFC8F20FFEF20673213D4DF03
+:10D32000160C29CDDF4D70548DCCA18379AA7704DA
+:10D33000BB5D24871407239D1AF0BC00B8B6DDE559
+:10D3400048C3796F501C6956E4635BCD76E4634B48
+:10D35000B7F373A82D02E45768DFB6F22A6ABF1448
+:10D36000E529945396707ED716E1F122DF6F7B207A
+:10D3700089CB537F57092EBDF79ADD4F42FDB64C3E
+:10D380002EF7B46D1D43ED915F923C756F286F3F92
+:10D390008FC3B56DB8D5ED82FC873845804FDB76FD
+:10D3A000479A89DA819C96E43BA7A43CFD9B51CE29
+:10D3B000DB10DF72BD52FE66553F4CDEDC29CECF5E
+:10D3C000DEAD304FE8FF8C52FC9ACE4F1E6EC9E4A2
+:10D3D000FC7FE24CC72E51CF8EF52A74F3EE9E0EE1
+:10D3E000F3AD7850676B4EF2C19D391C6908E73385
+:10D3F0005BCD5948671367021F06FA3B99C9F97953
+:10D40000480E73B821BD57F47B6FA64E93C6060332
+:10D41000FD413F678ABC06C46F684EB111CF4338E7
+:10D42000C3899F07AEE361D14F85B1F8F56983CC1D
+:10D43000A79F0E0AB9DC7266B5F2249F17C7F3C422
+:10D44000FF30DB9B69DD7C7E12EE4037B974DE0B6A
+:10D45000BE15D14F27EE3D6640ED56294F23FE15F0
+:10D460000D9D103CDBEE1D4F785C2AF0CCEE350BA9
+:10D470003A61EC6F585E64A372A013824F5B26E0A2
+:10D48000CDE23BF7DAE639E222FCCE23A0032A07FD
+:10D490007CEFCF1C3EF0BE25F1CDF4EEDCE2D0A156
+:10D4A000F1BD2C2F62A202A08ED7335710C005CF3A
+:10D4B0003C82CB5D7AF79D309F917A0EFF043DA7A9
+:10D4C0002FE0CEAEE02CAAEF3042BEECFE15CC0130
+:10D4D000F5CBE2995DE1F55938D6876E5448F1CC29
+:10D4E000C07665E1BCDFB218E6BE53C8FDC8AF52D6
+:10D4F000314DA67E1DBA48DE3E2C8BDABB74BCBD16
+:10D50000430FE9A814BE5F7A3704D1FE29DB94905B
+:10D5100086743077A6960E52B338DDC8B435CB2664
+:10D52000CE197B2CEEEF652D63E9DC683617D71D2D
+:10D53000447CED0B2179B06CE32DD7E7E2FC9E191A
+:10D5400086120EFBE286FD1391DE96B52CF9D97B8F
+:10D55000781FD96DA6EFFBB29C1FE3FEFA42B1958E
+:10D560001E840FCB161E37C6427BA767DE851721A8
+:10D57000BDC1B5FF0F2817DC70A34AF56F609EAFE1
+:10D580003F44BED0C2C7B9DE75491F0BFD5D9FAFDA
+:10D59000302CEF365B1357C3FCCB04FECE09FA6D7B
+:10D5A00036B3C5CF5A705E0969C9F0FD7A94540745
+:10D5B0009103C76609397186B20DE59E51B3F8FE35
+:10D5C00092F5B11FECF76A8407D4FB5AEC2B99074C
+:10D5D000B852FD8ACD41DD2961981ABC63205D9463
+:10D5E00033F36FB8CEB9C96C36DE9B7A7FAEB22703
+:10D5F00069BEBD65B4EF43D36CB8EF9D8C7989EFFC
+:10D60000B9C712DD77CFE8EDDE04F9EEED63ECCDBE
+:10D61000C4D7F9FD7DB995D1F9DE3D83F335C95FF6
+:10D620004E5ABB42895EC57DBE5C90C6278DB31E37
+:10D630009C04F5CB2DC66E3C0F963FB020CC06F374
+:10D640002C6F83FB3C9C636C8BF63E0FF7EDA8AC14
+:10D65000DC81F7F2C0FB37D20CD251C51685E870D9
+:10D6600054B3DD18477C4CB1E2FA2A2CDE543CFF5F
+:10D670002AEC663B969F6F72DC7F06E4C38B4D738A
+:10D680002865DF02DC619E5721F260DFA7673B93CC
+:10D69000B2008E65AD65749F0CC970127F720ABAB4
+:10D6A0009B0B605690DFE8BBE2701FBE9329BE471C
+:10D6B0005AD32C44CF668670E83658D3705EDD1B93
+:10D6C000CC3A3C37E7DEC9E91AF699490FEDEFD2BB
+:10D6D000B360DCEF3DD81EC62B59AF2FDE0EF9919B
+:10D6E00026A60F8D44BACA24BA6ECF717E8DFCE097
+:10D6F000B35FB23C940BCAB76CA5F948BA60FACED6
+:10D70000C26128E7ED4CCAC2FBB5A4A3F69C997987
+:10D7100008BF7E7AB851213A80F4680AD1C3FC6907
+:10D72000583E77A637750DCCAB48AD650ED433C4E3
+:10D73000327B10CCBF8FF5923CD107F2049E6792EA
+:10D740009F48BE0174E03045FBF0BBAB09A6023C2C
+:10D7500079779389D2A79AAC4C0FF0DDDB144BF9A3
+:10D76000679A6C947A9AD2E9FBB34D76CA1F68CA5D
+:10D77000A3FCA12607E50F37CDA1F4C5A662FA2EBA
+:10D78000F912C085F890E42B921F497A927C299077
+:10D790008E4A01BC0559D49EF89EE477B80E5D967A
+:10D7A0008F1F49FC262BC5AED824E4635D4B905FE8
+:10D7B00014A9E7F73D0FF0EDABB2D8836C0817CE94
+:10D7C000F7FA2C263AE7138DEC30DEFF9B573BBA75
+:10D7D00037F99DAB3757294CEF47B7B7349899DEE7
+:10D7E0008F6E6F6D8CD0E44B1ADF7D3506FAFF47E4
+:10D7F000827335D2DFC93BCE3EF65FF0FD893BBE7A
+:10D80000188DF88679EC7C08C75D17DC3F8F48CC13
+:10D81000B718E89C1915CCEF49A382F93D09FF1010
+:10D820003FCB18DFA74FDCF137DAE7DD8D41361546
+:10D83000E50FC417C0F72F025FCB1A83088E651B54
+:10D840004EEF7B1EF7FB3A23F1BB652D627F6E0620
+:10D85000B8FAC96DA7E218C9678A83B14680DFA903
+:10D860005F1ABD70F6B3538AC9AD4043052E4D25EE
+:10D8700008D7CDBFFB00E56DA5F104C9C74E93C520
+:10D88000ABE2FC5C86F3FEFD298DAF513DD635320F
+:10D89000E26C086D4586700CC97118914F206D239C
+:10D8A000FE96A51F63B8BF59AB621D0DEBAA10DF32
+:10D8B0002B362B247748F83F92A5D2BE7A2F534FB0
+:10D8C0006936EED9E1C4C0E89C92740B7CC3E1C612
+:10D8D000FDD19A69ACF4E3C7CBC4F7F2741DA5F28D
+:10D8E000FB7BB02D914EB2114990DE9D9E6C5C4E3B
+:10D8F000FCCE66447E20EB2F4BCFDA989C83FDCC88
+:10D9000088627EFB7257969EDABD9769E5F331C156
+:10D910003906ED6A87380FA47CF219FE7332CD9F69
+:10D92000EE5FD5CF3CFDCC8BA897F82888F0547DCE
+:10D93000B5D06F64B8272E20B9C66151609DF5023D
+:10D94000FF854FFF35AC0BCA571DE0FA5348BB317A
+:10D95000AD5F5745FAB27AB88F1644227F359CEAFC
+:10D96000F2A3CB579EF928AC8BEE17AE785D2CA6B0
+:10D97000DE780669FD81D3B319F6C77A375A2D03CD
+:10D98000DBAD52BEA57BA65C47D191AFA2697CE519
+:10D990004A34D53FB2217A303DC82AA63FD5BF7F51
+:10D9A00049CFE0D0E8D556B12D975498EFAA7573BA
+:10D9B0003E453A0FACFF41566814D20F9BC42691E6
+:10D9C0001E43CF7488EF35260E873EF7E870F61DAC
+:10D9D000FA9755EDD00844AD3EBD2DDC0EF3ED6158
+:10D9E0006CCE607849C8E6E7F405D8470CEE523DA6
+:10D9F0007B55BA2FF4EC0D25FAAFDF7BFF6B53217B
+:10DA00005FBF43C161591DEB2438D51F5099C9FF31
+:10DA10003C43FDCEB0A1E759F3746803D2D34A8FDB
+:10DA2000E2D809F3E933D9C287FBCDE76F829E6A5A
+:10DA3000823C1309AE62FEBD829FC97A2B3BEE3752
+:10DA400022BEA0DE45925F7E1BC2486FC67AFF8071
+:10DA5000F33CB72DDB8EFABD959EFDF574FEEF0D00
+:10DA6000B18E86757C21F4FCB21F6336DF4FC66C25
+:10DA70002E6F9C13FADC73CFA8C487709EB80FBFBB
+:10DA80004039D76F9E16D1CE22E0F61CEEC75C5F00
+:10DA9000FD959EEEB054A8FFE9E177298DCEE6EB27
+:10DAA0005A69E99C80E7E6A70742E6B8297D74F643
+:10DAB0004B30DE05CF8C28C56F5FA5641B383EB6A2
+:10DAC000A973105ECC3D4CC8F91E5ACFB9BDF10AFE
+:10DAD000DD6F11DE20E79F3BF05C988EF6AD4B8347
+:10DAE000479D89EB6983226C42CE34B5A2BCB11448
+:10DAF000A4BB70E07775072ED1F91BF85DD6A7FDA2
+:10DB00001687F7EF5ED26BC09F0EE9B7CECA715E83
+:10DB1000A466C4E03E28BDDA76D3CDC8C7DE307037
+:10DB20003C8CB43D84F7AAD2B78791DE628DC116D2
+:10DB300083F92FDF848B20CCBB345BECEFD8AE5C59
+:10DB4000D4737627F173BD76335C54603D2300EFC8
+:10DB50002E5872AD5B654EC8ABE23E734D7632AD6A
+:10DB6000EF912A9DC34876166F1AEA3D4F1A994BDA
+:10DB70004579F95933B7072473BDFE2348EF90D692
+:10DB8000467AD386A1FE4BE0B1763E94FBE1B3F634
+:10DB9000496F1ACA2FE78D5CCF87E5564CB378BD25
+:10DBA000664137D80FF6DB9D64BD4872E6C15086EA
+:10DBB000F2BEEEF950AE57F88DF9C920BF737389E4
+:10DBC000A02B90995CB87ED74E3E3F9C17CACF2BB6
+:10DBD0008DAD69285FCA715786B5D278E7C5782BB5
+:10DBE000835BB97DC2C8F591589FC63730B2A3F4A4
+:10DBF000EE092239F58BB8CE4338FE177BC6323C8E
+:10DC0000C7BB93DC9587A91CE437C047F553415E39
+:10DC10009CEFE77B42DD0CEA7F6EE0F2D0E7A1D11A
+:10DC2000240F9D087DB094EC323B8214D4AB7CAEC3
+:10DC300030632C96EFE4768CEAA646B23F54C37666
+:10DC4000675994CE6191583E96F42D9FFF1EF6A918
+:10DC500042DF37E377276B2DBD1DF7DDEE10D2BB1A
+:10DC60007DF1D4FF1A3B98DDA27A8756BF24E940A4
+:10DC700096DF9ECDEF1BB767F37BC11DD9FC9CA936
+:10DC80000BF13C984CEBE4FB15F040F72ED81FD17C
+:10DC9000A8EF3EE979215AB1209CBD698F22DC773B
+:10DCA000F3FBCD177B0D6477A97E3ED4417A9C4D62
+:10DCB0009374785E54AB5C0EAED601F82055EED866
+:10DCC0009D867276F31E7316C203E04DF7C8DE9D83
+:10DCD000AA18878FFBF9AE04AED7F78AFCA1F1A48E
+:10DCE000D79F1BC96E9D4F72CEB60908D7CB3B425A
+:10DCF000744817308E4301F854DFFE0B0ECFF04A04
+:10DD000092CB61FF11BFAC15FCB26ED3D4F0A9B8B1
+:10DD10009FDE5619CA0597F5F618E48781F07A4B0D
+:10DD2000F0959A438F19D16E570BFBC609FBA64697
+:10DD3000D8C76A9E5248AEABD938F521E2837F300E
+:10DD4000B0D1308FF39EFBC3FCF1F1BCE067BEF6AF
+:10DD500076AA5F03F579FB37C2683EBB0C769C4F11
+:10DD6000201E7F70FBA7D41FD4BE9F3E3C70AE4FD9
+:10DD700018B8EECBACF3DF3E427EB2D74CFA2BC0E4
+:10DD80007B22CA1DE70C9E4A5CF7B97D66E233E749
+:10DD900022F87EFF14F8A16B0CCEE3BAFB48BFF16A
+:10DDA000CE0286E7C10AB7B65F396E87E0BF75C39A
+:10DDB000ECE1A827AB033C607F80979F52FBB70D37
+:10DDC000D43E701D8F8A76FDFB735F08D1CBB911ED
+:10DDD0001C1FE79E1943E74A7704A773986F22DE5A
+:10DDE00057CE45F094A1300274502DEEA3E766782B
+:10DDF000E8FE7D4ED94F69B781B7AB6E147663A04C
+:10DE0000BB58A41BA449B48799B674A23C81FAEA12
+:10DE10008959947A832207EA9D913EF11C8ACAE1CE
+:10DE2000FB8BE178D1C2FE41728AC7887CD929E494
+:10DE3000B8DABD03ED7088DFDABD0AD9912E8B7395
+:10DE400010671D25F5E5408F352EC561C6F9B4ACC8
+:10DE50005E4976A486AD3723BDCB75D4E8D91CBC0A
+:10DE60000F752B2ACDA7DB0CFB06E1E03F9E9FDC64
+:10DE7000F577C10FF0CF1A4D722609D7BA1C1BA730
+:10DE80001FC8B6427FB52DCA161A2749DE2BF9FAEC
+:10DE9000249C002C46D497C17D9F970FB17E39CF2B
+:10DEA000C0F5CBF944E770FEDE9D64BB2F1FF1FD8A
+:10DEB000966AC77BFAE56FB3C323BF432EC39B5B50
+:10DEC000BFDE18E69F823405EB3A8BFC0DF733EA90
+:10DED000A5619E69DBB4F690F41DDAFC557BB5F9BB
+:10DEE0008C03DAFC840E6DDEFE8A361F22C6957026
+:10DEF000C27BAF6D0CBFF7628AF75E5B10BFF76243
+:10DF00001EEFBD98E2BD17BFE3BD17F378EFC53C28
+:10DF1000DE7B318FF75E4CF1DE8BDF6F1470AA155C
+:10DF20007A47C403DA65D80B666967A7FDD2B324C4
+:10DF30009AF8A7B493F6ACCCA07CBF5E679E89F438
+:10DF40003AA4BB01B964C1486741CE70B49F766EF4
+:10DF50008C43BCE9BB489FBBEA45AECFADCD325B3D
+:10DF600050CFD0B5E1D38D283EA58D74CECA81F5B2
+:10DF7000F6187A77111DE8BDC437BAD6DBDE9ECE1F
+:10DF8000F147FA0E6689A4FB49199E779143E33164
+:10DF9000D0AEC2B668ED28817695407B4A201D48F8
+:10DFA0003BCA1386DE38E4F7A7F798B6E0FC4F0BC0
+:10DFB0003D195B6C22F94BCAD545AA85E0B4E65EF3
+:10DFC000E5493CA72A7222A97DDF0990B707396F7E
+:10DFD000655A7E259BE4EAFEFC164547761AA78320
+:10DFE000CEA1DBC49C1295DEEE4D4823A13A3AC780
+:10DFF0002F5B74742FB8FC2795E48831ED3ACD7A05
+:10E00000C6BA8335F4356E7764803D7084A6FED53C
+:10E01000879303EC815769ED5437AE3F8AF7EB05E0
+:10E020005BB235F52A8AA706C051CC5BC8A5CDEBFB
+:10E03000DA1391FFDC16DA47F3BFEDA099FC2E2A24
+:10E04000E07C71C0BAAB3003FCB1CAE4B801E1575F
+:10E05000E53144A05EAB5C9C3FAC517B1E57E99917
+:10E06000CB1AE9A3BB2A2B734440FB0B99ADBB74BD
+:10E0700080B70BBA6D0FE6DBD0BEB43DD10A74B5E4
+:10E0800056F1444F86FE4E4738FF03E933D1E0FD99
+:10E090005509F2CBFD296C3DD43BBDE5B93092BBAF
+:10E0A000059D251AACC188EFEDAD2ADD0B503F85EB
+:10E0B000FA20490FDB5B8705A75A7CEBF4E1FF5B95
+:10E0C0005A1FE085FC46FA2CC746DE86729C87AF55
+:10E0D000B76A86E2223959AC678D3857580BEF671B
+:10E0E000ADC89F11F705B9BEF3638F4EB0A15DB304
+:10E0F000E970A28A7C5CB777571CCA1731CE7DB80D
+:10E100007FAAB68FFEAF7C18B7FA3D95A11DF99393
+:10E11000B659619351FEDC67B0CF85FCA6D65F1B74
+:10E12000F15E50AD771BF1DE59B567BB11EDFF3FD6
+:10E13000D9BD9DBE57EE2EA3FBF60AD640F7C8CF39
+:10E140000CFC9C96F0A89AA96CB3C2BC87E772B984
+:10E15000AF2A98FB8314A9F9AF46E17A772B99B8D7
+:10E16000DE1B8BF71BCBE0FBEF047F09DC1F7D6F11
+:10E170002E281A8E7A250FB7830EB51F167AC7D2AE
+:10E180007E58702589D21BAF8CA37BD57BAC783CA5
+:10E19000F1898C80FBEC9B2AD79B75F07D5065F450
+:10E1A000462DC07DF2B281F6491DF0AFBC2CBC27D4
+:10E1B000333605D2E27C5543AFAB0A4334F4BC9806
+:10E1C000456AECCA8BD8084DFEC6B9299AFA37DDE4
+:10E1D000382E80FEB37CE5C447A668FC57EAD6B962
+:10E1E0006C0AE9D1666ABF43BA8EE8EC5A4DFB3A35
+:10E1F00036DF570FEFC13BFE487066ACD388F7ADF2
+:10E200002A1DF7D759ECEC16DFBBE83B2C44B30FC3
+:10E2100047A5D8FF8B9F8B06D2CF4BFDF462FC77CE
+:10E22000CA60E722205A8C1BAE72FD82532B777492
+:10E23000D2FD93713CD4097D4F5D3AD7F7D4B93AFA
+:10E240008D0D1682BF3E1E4052DFAA903E0FEA9B04
+:10E25000E223797E1D7E3F60F0E95918EFEF0A96C0
+:10E260009F50CB70BF0496D7C3BA51CEA8477D0D3F
+:10E27000E999E67C4A7A26398EE85FD2E98A76AD5A
+:10E28000FEA81EF53A7EF85C9A6B237AADDEBDFFE0
+:10E29000B511009F05C51199B88F6A3DF30C65193A
+:10E2A00003E94DF2F9CB553AB27BF7BD799CE8AD65
+:10E2B000AF4A4F74FD7D70A97770BD66201D56C2B0
+:10E2C000BA4C307EE501C5EE56783D84CF08A4CF28
+:10E2D00000F8C40F023709AF7EF80594AFC07FE4A1
+:10E2E000A03F81E2F6260D06970078CA7102E0C5CC
+:10E2F000F2B4F0A874DADE46FE53794265EE1FB040
+:10E30000FE15B84E9C07AC13E731FF0AD79B487B3C
+:10E31000C2A22B7ACAF7D34D31C02B0BF79D769F43
+:10E32000F6D35131DF370BAF4453BB1F8B9EBE8FEB
+:10E330008EE4FC25DFF6EDA33B896F3A7343A3CE51
+:10E3400002AB807FE7125F10FC7568B9D4C5F9A8ED
+:10E35000537BCE8CBA238FFC8EFA2CC92457F49FA2
+:10E3600043566DF99AD0E4182C770ABD9DE4C74E48
+:10E37000514F8E5306E5B66148D723A3511FBBB159
+:10E380002525B1CB4F5E716E3044A3BE3071FD3098
+:10E390004ACBCCD6683C47CAD6ABC5783E9EBA2B92
+:10E3A000263A0FF5F31B0C5173A1EB533FCF496491
+:10E3B000E3315F44E9E9AD418BFDF5DC32BD4B9CB7
+:10E3C0002775777C40E7DA05DD9B618B71DF6D385F
+:10E3D0001886AE37351BDE9D6805916453847373D0
+:10E3E0002ED951B7EFB222DCACDB27A09EBA1DEFCD
+:10E3F0001EC37DF243F586A218D48BD5FEFDF8E34B
+:10E4000078EE3BD71BA251FEFCFC4F702E2A74AE57
+:10E4100091DCF09999D17DE9B39D216EB4DF7FA69F
+:10E420003007DA7756AA47275835E76CC7229CC7CA
+:10E43000EE18673B1FDFBD2B16C7B7BBC83FD3B96C
+:10E440007E74F8607A1499AE6AE772DD2EA9C7155A
+:10E45000FA5E94E7318FF23C1BC3E579CCA33C8F85
+:10E4600029CAF3F8FD90D0E38F6AEECDC4FBA86B08
+:10E47000264B6FA073D7928EF2FA6D4AB01DF9CF7A
+:10E480006D8A3D06F563EC4F11FCBC0DC0AF4CA787
+:10E49000F582CCE547F7D3AF9898BF9FD90C16A16A
+:10E4A000C9CF32C569EA17599334E53F891DAB29B5
+:10E4B000BFC696A9C95F973E5953FF7AFB0C4DFE24
+:10E4C000A779D768EACF73CCD3E417CC59A2A9BFF8
+:10E4D000B0B84C537ED3E2959AF225CED59AFCCDB6
+:10E4E000553FD7D4BFA561BDA6DCC1AC7A3CF73A95
+:10E4F000F09E05707F19EF5990DEF6D6688B3F5E6F
+:10E50000F367E91A06D3D37F2CE8376392E343A479
+:10E510008F041DA743481D28425C10E74A3CF32A9C
+:10E52000FC9EDB19877413582FB03C3FE4D8651B61
+:10E53000E0F0A6892137EB813FE44F3A969D02F93E
+:10E54000270ECDE3F9A9C79E4B86FC6F26DEC7F3E5
+:10E55000571FBB8CE5A39E5F74B31EF84EFE0246A8
+:10E5600022C77387BE5EEA8275E44F4FDE62E77AA8
+:10E570009241FD34FBF52C0007F46F443860EA0546
+:10E58000FAC4F418D027A6AF007D5618187B0DE802
+:10E5900013D31370DFC4EFAFC37D13D337E1BE894C
+:10E5A000E91FE0BE896927DC37317DA76931A57F86
+:10E5B0006A7252BBF79BAA28FDA0A981BE7FD8D45E
+:10E5C00048E95F9A5CF4DD3C51EA2FBCA47F917668
+:10E5D000A67AB4EFA17EEEB0E1BCBF1D56DA09A564
+:10E5E0005DB0B9817585E03EEDD2479C35F9EC7D93
+:10E5F00043F3593D3BEB27876D8D75444D24BDC6D4
+:10E60000482BD97BC4F799CA820434FDCD9DE01C08
+:10E6100081E50BB3CA378403FF98FE6D8301E9E5FA
+:10E620003DE1A71AD8FF855C2E0F1B2639464D8485
+:10E63000B4C0C4FDF00A4CDCCFAE40DFD58CFCA8E2
+:10E64000F92B66433F9AA3A146E24FCD77E9DDA8B7
+:10E65000A754BE64949F16C528DFFC5527F9E5151D
+:10E6600058EDB174DE887CBFFD1CFFFCFC65A43D49
+:10E670005BFAC9147ED9350BE5806916A32D28C035
+:10E68000FE8E76EBA3A1EFCBF9301C4FDAC9777C75
+:10E69000C5BCBA093E7B7881A93309F504D3D69A63
+:10E6A000ECFEFE3FD2EEAD7CD9A9E27922FD7CE4FE
+:10E6B0003872BEA17AE82FCBE7C75360F564A25F3A
+:10E6C00043739D85FA8B81EFC62CAAE750A99D273D
+:10E6D00013F5C0D36A2D76D46F4B7B7B8C5837D41F
+:10E6E000A375167EE9247F8369C2DF00FB31F172D6
+:10E6F00017F6332DCA1BA7C7F53718EDA80F7D4CA9
+:10E7000081F6593EFB3FD60FF1DBBF384FEC37F5B2
+:10E710006B982FCAED0E07C17781BCBFD9445E9CB0
+:10E72000CFCC3493F457AAC81F9BE07422DE8B83AE
+:10E73000AC7F0DA17D9E92807A8E79426EFF0E7A1B
+:10E74000598E74F6DFA71707C7F74846FAB440BAE0
+:10E75000917891781E8A8E24DEFDFCB508CFFDFEEF
+:10E7600057A29F40FA1A8AAE243D159838DE11AFA1
+:10E77000E84723E948F9D2B39DD6516BA2734ED234
+:10E7800051201D0CA4234E97CD3F33517F03E9C880
+:10E79000877F84C7BF4E479D2A9EBBFF2CFDDCDAD6
+:10E7A000CB668743D12FAE765EC8457FA02BB6D708
+:10E7B000305FCE66CC469292E52D439407D297AC5B
+:10E7C000FF34D6CF1D58DFF965AF21DC8F2EA78926
+:10E7D00033F0F521FA7F43F8C5BF6196FE1E0E4B5C
+:10E7E00026D0C12CC1876F2BE2F4352749257BC683
+:10E7F000AC8C1524DF330B978F6DF03FD2B709FB3C
+:10E80000FAB5A2DDEC6F8B5B709CD9515AF9FB5ABB
+:10E810002177CF09B0B75F9BF11392C3AF0D90B3CF
+:10E820007F3F51C8D1492C89DFAFB790FC5B28F6F8
+:10E8300063BCC0778A4D65F900F722E6D4E321F086
+:10E84000CA45A303FBFB097351FE1AE6A6F43AE698
+:10E850002539E07A383030FF53D87A983F1E72431A
+:10E86000C92AE86F56F6AC54FC5E6BEA4D34EAD028
+:10E870003BD0F921EEE77AD5F931CA9917129C639A
+:10E88000F07E7CACD04672D831530AC985B89F0C53
+:10E890007EFACADFC3399A0AE7DC713867317D1521
+:10E8A000CED95438EF7E07E72CE6AF4D5FCFB0DD11
+:10E8B0006C9BD6BF47B6BFCE3A8BE9870D7D8E5D88
+:10E8C00037E18591A8C77A23624C21E2ED8D884912
+:10E8D00085B8DE372262743C0D32523AFEF9D4C15B
+:10E8E000E45649AFBEF166D37881F095F00C84A36D
+:10E8F00084EFBF004FFDA4DC81F0BC806730EA4F9D
+:10E900004DEF86C526A39D51C4D385703E58F7FCB4
+:10E91000F8185C47AD89C3655AE3544A0B1A27338C
+:10E920007D36D9995C08DFCF7109A8700ED0B3315C
+:10E93000FD4CCAFF4CD0567A8C331AE7713ECB9B04
+:10E94000061219FB745B7318FA675E7846B5E3BD6F
+:10E95000A656B56DB1A39EFC0D95C7057D7B3C11F8
+:10E96000ED9B6CC7E0FED2B526093F17C1B5ED6A35
+:10E9700007ED3786D6D9689F5C333288FB199379C7
+:10E98000216B6839676230E7332383387F94F882DC
+:10E9900076FCDC857E26025F8BBF2F98EE3579A34F
+:10E9A0001CE3713DAC9069EE05527FD117A5D2F9F9
+:10E9B00050C0D21EC2FB7BE10903DDDFFB0A192F29
+:10E9C0008FE5F6CABE139755DCEF45A10A1B96E406
+:10E9D0008B9B098AD5319B9F3C6DB605339B1FDD10
+:10E9E00086A4476AF2A1F6119AFAE179C99AF20867
+:10E9F000C7559AF26173B234F9E1C55334F5631621
+:10EA0000CFD4E4E39CD76AEAC757CDD7E4253F8A41
+:10EA1000E79F5842C3524DFB518DCB34F5935CD5E3
+:10EA20009A723538EC498A3B75393AD3A3915FF134
+:10EA3000BF94CD6B34F51E0DE37120732C9573716B
+:10EA40001F8E6EBD5D3B2FF54D85E23A6D9C0FBA72
+:10EA5000E07F88DFA2582D5F9C65D5EA1BE21BF49E
+:10EA60009A7CF524E18F34814D203EF87D78765EE6
+:10EA7000A5C173203C00EF762FD68773D505F9A288
+:10EA8000DF97EBF1DC47BB82FFFCD1AEE0BF5EB4A9
+:10EA90002BF8E7D1AEE05F1FED0AFEE56857F02FD7
+:10EAA000CF3EA1C5736EA716CF933ED0E259D2DFF9
+:10EAB00050F898DCA5A583407C4CFD2C802E041ECC
+:10EAC00016C3FF06C3035D1180FE673530D29B7D00
+:10EAD0001F5E1E9B24CE278117C003C5F5F58D0C44
+:10EAE000253C3C26E65FE01D4771B145A8374BF257
+:10EAF000ADE73171EEFE769873F724D8DFBFB365CA
+:10EB0000C5223F9ACEB85D7376ADCEEE85EE9F0AF4
+:10EB1000C0FF84B1CE7D587FF1B0CB8946A4875E1B
+:10EB2000E718BC4F7E28F424817E9C2E1007280E07
+:10EB3000E17695E26F4EEA5A15E4CBDE04E721E474
+:10EB40001BB76634109DC6B2E2FD9530BFD2FF0CF4
+:10EB5000223B4EE9281EAFCB32BA28CE41F2BBD2BF
+:10EB600078EE47F4F2246117B6737FA2A393B83C02
+:10EB70001B6AB792DF7159068FE3806B5762E978A1
+:10EB800084CF9BE631089F366E37E9C278E1285F73
+:10EB9000BC30CA9B28DF2508F9AAF9CF2613AE633B
+:10EBA0004C3BD39C9363DD268DDFEBB8DD564D7E69
+:10EBB000BC275653FFEAC3364D79A6375D539E7D79
+:10EBC000C2AEC9E776E669EA4FFAC0A1C94FEE9A2C
+:10EBD000A3A93FF5B3624D3E9EF53E8CF01DA5F016
+:10EBE000FBFE3793B8FF14EC55B2E3956E8AE071E3
+:10EBF000A0420F20E569E90FED14F41D28A78F321C
+:10EC00007239B5398EF17B9849DCB798565E770A30
+:10EC10007F6629A73297D69F59FA31F7CBF5426E16
+:10EC200097F2B19F1FB3C3DF8FB954C46F079E7FA4
+:10EC3000863CAE1F099CFF28235F6FF3CF8D1437EE
+:10EC400022E715381F6716A7DB9DA6C1E37786E587
+:10EC5000713DC1F8CCE2903C481F37D8DDA447197C
+:10EC6000309EBDCB85F7CA5F1AED77DABE7FBCD286
+:10EC7000ABF97A4A74BA5BE76590BFD8E267FDC624
+:10EC80004F11E3064D51065D5F6938F7E762E146D3
+:10EC90001BD2EFD0E37178C61A590BC51909BFFF13
+:10ECA0005BB678EE1D034525C65603292F98DB80F9
+:10ECB000F4307726C853998C1DDAFFEC2316906741
+:10ECC0001E6FD4939EE7AAC33125AE545F1CC7289C
+:10ECD000B86F207DA0CC82F7944727737FE5EBF2D5
+:10ECE000F8FA8AD46FFBFDEFC97EC198382718F96E
+:10ECF000C30C426F4487721D3F963FBEA4DB403871
+:10ED0000C9FB2513FE8EA9625E127E723F48F8C9C8
+:10ED10007808DB6A43F193168AAB98837E64127F8E
+:10ED2000BF9DCCF9D12F053CB01EF2A3A1EA15A9D5
+:10ED300019E1A80FEF63B670EB77E87B7FC4380565
+:10ED400082FF50F15543F187017C618878ABA1E8DF
+:10ED500093FEFE89B82B3FFEC0FD7A043EDCA93A43
+:10ED6000B2A36F0AD5EEE3A7047F9827F6139CE3BE
+:10ED7000964C2D9F60A8BF6FDEA00A3EC1CF6F9456
+:10ED80006BF0FBF20D063A4F192B7E10E3883E69BB
+:10ED900033907F6B81C336DBCEEDF324DF90DD0B48
+:10EDA000A656E6D29EDB20473C89F789E9CCBE1106
+:10EDB000ED19E59BB5E52B2CB33F47B96179C0BD93
+:10EDC0007485B8AFAE08B8976ECB13E7B19DD9493B
+:10EDD0001E1376FE2A51A79F8EDC29E142EF42FBEB
+:10EDE0001352F20B9370B1A1BD26DB9707F805A76C
+:10EDF000E339DDA21FD45FAF1F7E43F8239C477F1A
+:10EE0000041BEEF73E8AB7EA3B60E6764A690F12CA
+:10EE1000F5CFBB2E5339D6C7DE2E64764E4079A788
+:10EE2000DF7E146087EAB3E8C2F2B0BFBD06EA4FE6
+:10EE3000FA5B54FFCD3DC1EA674F7676A91AFF967B
+:10EE4000C0D4B9FE20F95F6C8A70BE8A7CFC9CDE5F
+:10EE50006E42FCDD6539168D71F27385DE2670BE5B
+:10EE6000FDF26DBEC2EDB02E1E37DB3747213F00ED
+:10EE7000E0830CF78DF41B98C7BC51984A7B8C73C8
+:10EE8000F36482B3B4C7947927D33C1736AF300408
+:10EE90004395AE87D71505DB7C769AAE04EEF73343
+:10EEA00094BD66C1954CEAEFC62B53A99F337949AF
+:10EEB0005CEE6AB97735D2D155BB9901D7D915E047
+:10EEC000F72ED31B27F3FDB01A633172FDFC89D6F0
+:10EED0002B44E76B1426FD8B884FCBFCE556912F16
+:10EEE000E2F9DB36F07C9781BF33B34BE81B709DB2
+:10EEF00098E27AF05EBC57E823701D98E23AF03B46
+:10EF0000F225CC235FC23CF225CC235FC214F91258
+:10EF10007E5FC68A1333556E572AF4DB3768572A4B
+:10EF2000F4937BD0AEE49F47BB927F7DB42BF997DF
+:10EF3000A35DC9BF1CED4AFE79B42BF9D747BB923C
+:10EF40007F9EE55DE3CB231F73CCD3E417809C5FEA
+:10EF5000E8B76FD1AEE4DF3FDA9534FD39576BDAAD
+:10EF6000DFCC1A35EDD1AEE45FFFD646456377BA04
+:10EF700055BC0750DE3E8CE863EF84E2A4C980DF15
+:10EF80008F43FEFE3303DE37D48E9548B76BEA829B
+:10EF9000ED1CCFAD7338DE758CE3B97709E1799D4F
+:10EFA00091E78BB8FFF160F69B4203B7DF608AF60A
+:10EFB0001B4CD17E8329DA6F0A4773FB0DA668BF0D
+:10EFC000C1EF68BFC114ED3798A2FD0653B4DF60EE
+:10EFD0008AF61B4CD17E83EDD07E8329DA6FF03B1D
+:10EFE000DA6F3045FB0D7E3F897624BF7733504E74
+:10EFF0004FD5DC1F810E35F747AB268F72BA7F7D68
+:10F0000094D3FDCB514EF72F4739DD3F8F72BA7F36
+:10F010007D94D3FDF3CBF36CB4BF505EF76F87F2F2
+:10F02000BA7F7E7CABEB55D41D5DBFEDE22B9876AD
+:10F03000852A8F2BC00A964DDE578276B62EB39264
+:10F0400018019CD2B0FED99242D8B34EE1C73781A5
+:10F05000F5EA10DF646707BC39BD8CFC8EC77F13EF
+:10F0600047E5D2AE4B7F80F7CC038CE4FE43225EB3
+:10F0700053B6B733AB8AA9ACEFCB0F5E2F707C5978
+:10F080008FF8A5DF3CE06298897E2699EB2C59E841
+:10F090002FBF4BA7707FD33BB9BF6F205D3D28E4E6
+:10F0A000A05DBAFDC782D17FA84CB1631C439A9E74
+:10F0B0009D3064219C1AB2503EB8637284F0076E92
+:10F0C0009882FE4772DE520F087C82E2D7F27B996B
+:10F0D000B102C699F625332E47FE6EE47201B6C31F
+:10F0E000FBE23897E278D28FBE374FE6E79BD3B585
+:10F0F0007A4A057C1FB7B7610AC6C5CD0DE6ED7E1D
+:10F10000F34418C1F18616E5498C3FCCDFCB1C18BF
+:10F11000EFBA55F0D3717BADC60A1AD74AF174B273
+:10F12000DFB26D8914FF57C6BA0A31BE82E5280CDA
+:10F13000EDA3126EB0BE57707D69B0550C247FF2FE
+:10F14000B89C60119723E37182228A17E6E5FAE200
+:10F1500072A6E54414A15F1CEB60760C03BE3EA7CB
+:10F160006CC370E8DFE976D8D1AF68DA970DAF529B
+:10F170007E4731E5890C26D23874AE8D7129F4BEF4
+:10F18000C60DAEEDBA281BC6EBAE374463FDBDCC51
+:10F190008EE20E1C3514772AE797C13A756605F1A1
+:10F1A000CE8E0FF3A323E0003722DE33ED067A7F05
+:10F1B000639EDE6A40BE11788E0FF45B0C901302E2
+:10F1C000FC4B9AD77D90A826A37F89CEEE45BE75CD
+:10F1D0003084E40529EF94097FB3CB2DAF0EBF092E
+:10F1E000CACBF673F9C0D9AE10FF93FE267529EE8F
+:10F1F000441DCA0B23B64F8854F9F98F7CF19CEB60
+:10F20000B945B845CB36BC4A7111651B72C3795CF0
+:10F2100014B7435408385508BF2296618D4639F318
+:10F2200014F01DC718F24B0CA7B8C2562ECF49BD1B
+:10F230008E9407E5FB31656F65BF86782F7B4CBCEC
+:10F24000CBB2B98CE2AF02FD7C6A84BCB7B2C540D8
+:10F25000FE432B03E4C11AE12F5413200F9E9C2C74
+:10F26000F440521E14F717E9CF5BF6D6F18524AFB0
+:10F270003418C82E57B29ECB2F6C3F73633C43C9E2
+:10F28000FA593A7C37A4E4A0C3AE0C42276F0B397D
+:10F29000666E9799E03AFF4A3CA58BAEC4517AD38B
+:10F2A00015EE4789B12F48075D2F3092A3DF157205
+:10F2B000CB42F4ABC478445790F09F642437653256
+:10F2C0006B11F28FAB1CCA7114FBE61A9C1BD06F3A
+:10F2D00073EE7646F147D7A37C03FD2F467907F5F9
+:10F2E000EE39494514873147A17896EB73560BFAEE
+:10F2F000067A6748EF2E41BFC594EF3F17049D3B48
+:10F300005DDD7A84FBF52EC588EFF039C53D56D218
+:10F310007120BD978608FD9385EB97FAF54F385914
+:10F320007AD4C6740BFAB796A26E7004E388079875
+:10F330008766F0F2D829A65B5AF052F3DFD44B94DB
+:10F34000E8743CDE09E42DE4ABB7ACCD342EF3E336
+:10F350002F9F4C9D39696AAE0FEFCB02E2F4D6DCE9
+:10F36000353AE6BBE245CB01CEB84F4AC3BB7E0679
+:10F3700014CAF2A6304721889E4B985C27F3A25FFF
+:10F38000E052915F3E25F3AF9B33083E94CF793135
+:10F39000FA1617F155CEB76E46BEA522BF72664D5E
+:10F3A000217ED5351BF11192D12BDE21E0F10E81AA
+:10F3B0007A88E553381E02F511E5199C9F33BD2D5F
+:10F3C000F1668A0BB6913E4FCEFF94411BA729D31D
+:10F3D0005BA670BEFC63C537FCAF14E70DB8BE0773
+:10F3E000753C6E7E84DACA845E88F6BFE41F4CBC2E
+:10F3F00023E1C33FC869644757ACFEF8776E56787F
+:10F400009CFA10FA1B96DEFBF04ED4DF351919C6B4
+:10F41000B93E91C6E9E889DB8D248797183B5FC523
+:10F4200077B2241C3F6AFC0F03E9FF997734BEFFD3
+:10F43000B5B4C16C47FEFCC9D4E28A29C3111F765A
+:10F44000C2C724D866D8FFC984E215F8BD6ECBD1F7
+:10F45000C7316E7F554712C591961DCEDC88EF8966
+:10F460007C32D5598BEB2DB3588D788ED7B744D0DD
+:10F47000B9561A23E23A592FD9A924FC5BA6F0F316
+:10F48000744A3EEFBF47DC479061CED3D4137EDC95
+:10F4900001FB44EA0503F50B81EF380CB57FA41E90
+:10F4A00001F506463FBDA2D44B18D24F2DC173B40F
+:10F4B000C4A88D3F94E941A97713F7C1E5FDE7584A
+:10F4C000C6EC18949BB72A563CC72A2CB69B2643F9
+:10F4D000BEE284013D30D9DC481B7FBFE32EFE7EB7
+:10F4E000C732D8AFC86F4A843F5645FB64DA6F1500
+:10F4F0006E48B387DE97376F3D9EF002D28FD741BB
+:10F5000071F915568731D26FDF97B72A9AB87E996D
+:10F51000DF3945A5799780988EF0BB656D9211DF34
+:10F52000D02901F102FDFB0E4EB169E2AAA11EF93C
+:10F5300035CC4D66AFF1F79360DE497CBC2CBFFE45
+:10F5400097B56ADF2780FA2417FD764A28E1AFCC09
+:10F550000AEB4EC2D44AF30438109C7AEF85FE6C55
+:10F56000340EE1A3DCEB36E0BDBB04FD2920BFD4A3
+:10F57000EA36E038CB5AF87B21CE2D7C1CE7E60832
+:10F58000E378949BF4566302C20F2FCB51343FE2D1
+:10F59000831500178CB792719781F02913F3AD682A
+:10F5A0008DD0CA63AD5B0D888F2543BC57D02DE845
+:10F5B0007659CB0C8A37AFD03B289EC129E0FBC9D6
+:10F5C0006AF3DD681758D2F6902109F27F14F4DB54
+:10F5D0002DF6DDDC64EF687A1768B5D98EF35C62CE
+:10F5E0006DA5F5F5C3F701808782EFCF14137C81F9
+:10F5F0002E5CE89F57D1A6C5A76F3E1CBE156D6552
+:10F60000B4DF2AF54EA3D57F1EED4747A31FCA12CC
+:10F61000D8DFF8DE11B33A29BEE9EC033725D23A38
+:10F62000619EE40765B7CDC6777E804E888E25BD86
+:10F63000C8B86C39DE3753785CE637DFBB2F1D2442
+:10F64000D734037E51DF3DD4BE346260178C6BAC7F
+:10F65000E0EFAF05EE53B93FFBED07629FCAFDFB3C
+:10F66000B8A1D81BABF8F80C9CB70DCF0E02A74978
+:10F6700053F97C970ABC025C5FF18FE3B24DE578E9
+:10F680002D49D6EE77EC0FFB0D93E533BDA331EE9C
+:10F6900052D697E39644F27648F7486F61623CACE5
+:10F6A000BF86EA6BE351CAFBF9C5DE0DD1C82FF660
+:10F6B0002B24F7AEB9F778C2BFA33CBB8FCBB3E71F
+:10F6C0006A77D6C7A1DCA87727FABF8B55E1E5FC9E
+:10F6D0006139C83FC82F2AC539BD2FCB9930D5CF46
+:10F6E0007FA2E2FE7D694ECE5FBCC85FFEB2EFA591
+:10F6F000F7A6D87CE7A79CFFB2CD7F349459FCE1F4
+:10F70000C5D777777A1FC5D9955B8C36F45F2E6F96
+:10F7100029237ECB62E15EA1F8F01D4807652D0A22
+:10F72000BD2F56DE38D1ADFE5FE4CBE55BE6D19B65
+:10F7300048124FF2BD13799ECAF93BC4FC970A3AAE
+:10F740009E3595EFBFA55549C64ADAF749C672A45A
+:10F750007F51BEA442FBBD1F4FFD76EC8C8DB83FA0
+:10F76000306E88EE275B0C5CCFB73794E4D5736BB3
+:10F770009EFFC322A8F7C583DB13513E91F35821A6
+:10F78000F479CB855EAE52C8AD80A7F953FDF8EC95
+:10F790008A27389ECA9F79EBAFF82E5749B2E067A7
+:10F7A000F7F278FE659EFD84B7259BB71A92105F2D
+:10F7B000F848AD5FFBF206B8E8023C976EDE6E409B
+:10F7C0003EB04CAE3780DE4B84BFAF842B9E3B8A6D
+:10F7D0009FDD42D647FEB71FC659BBDA1C86FA69C1
+:10F7E00039CE3D53B9DC54DE101189E3953794FDD1
+:10F7F0000AEF1D92DF07EEBBD366BE1F96417FB8AE
+:10F800002F4FCFB0535C33DAB5063B57EF9CCACFCE
+:10F81000D5470DFCFDC6F810CF1E8443FCAA603B03
+:10F82000F287D4D42EB21B233DE3BC8D3AFEDE63B7
+:10F830006A6DD7259C0788D4E49F8229BE33852230
+:10F840007634E49FD4F1F8AB6495A7BB057CA0DCCB
+:10F850008BE52CAA8BDE9DEB7F3729805E8D6CC7F4
+:10F86000667CEFC618C5ECCD361F7DCA7E247D4A66
+:10F87000FA1D6A7DEE1FB8BED349421F916E4FC478
+:10F880003895D2FBC6D8513FF37DEB348AF707FB9E
+:10F89000D70BC49A1739C87A53F9BD65E8F5B61580
+:10F8A000450FB2DEC075CA7D227DDAFBED0BADDC03
+:10F8B000BE705A81F30BDA9D5E6D26FF2FB92EA91B
+:10F8C000FFFEA17108AF4C8D147A9DAE5094234B6E
+:10F8D00082C5FEF7F23C7E9FE7F75D9EFBF2BD36E8
+:10F8E000C99FCF3488739175DD8BFB9935A6D0FB0A
+:10F8F00024275B4F87E27B29A767F0F9C9766B0D58
+:10F900003CCE98851A6DF8FE21DCAF4E36A2DDA7FD
+:10F910002586EE91B734A6105FB8C515C1F50F4224
+:10F92000BEAF147C30646DD9467CE77B797B925501
+:10F930008171965BEC67DBA9FD383BCA83216DF3CF
+:10F940008CC924F7F27B80B413AD555831C58D2195
+:10F950009FC4FDA53B9A8AE7CE8A767E0F98AB635B
+:10F960009BD14E38AAB978761CF28987158A3367FD
+:10F97000DBB4EF58A567177F4CF7BF8077E0D61A46
+:10F980003C8E18E4E3206FA0BE69B9A598E4F65256
+:10F99000412727DBBAE93D7A09D701F13F461E0727
+:10F9A000DC1BAA233DDC0F8D03AA1076254937D234
+:10F9B0002EF508FE6732C249A573AD482DA1F79414
+:10F9C00036B6CDA2B4626BD183AEF1187F5C1C3D1C
+:10F9D00085E66D203D5945DD2C1EAFFB645004DEED
+:10F9E0006F120DAE447FB9B462FB268AFFF96CBB7F
+:10F9F00099E27F0AADF30A23A2E8BD638AAF93F5CB
+:10FA0000C2F3F979515D374B13BFB31CFAC4773693
+:10FA1000BFF284901F9A8CCBA98D7106E7E7F2F8AC
+:10FA20009CC9361E971347F56D83EAC5657AB6897A
+:10FA3000C779F8C51BDDB004DAD7D63D1786FDD4EB
+:10FA40003CF0EE44AB8EF450D1F9C3FDE28DDA798F
+:10FA5000BC518CB82FCD8D2C5EB404E1FF7B95E0BA
+:10FA60003FD4785587158D1DEF167738C9AD4E2FC9
+:10FA700033A21DD9696524177FA6B2469403A4FC5E
+:10FA800022BF5F95CFF9D567E1AD89481F2B773D40
+:10FA90009488E7CBE7A13C5FB2EBA6D7915F3977BB
+:10FAA0000471F95CCF481E2E7771F99A5545CAF753
+:10FAB00048CDA5404739F921FCDDA3766DBCB97C62
+:10FAC000E7F6733D7F9F07E38D90DE3FD27B972360
+:10FAD0007E3F02F915EFB1E1F99C3E3F6A5567930D
+:10FAE000DF106C1494433E6A7D2E14E3A1A5BC562E
+:10FAF000A4FEC581EFFFAC39C8E382F17D7A7A2B91
+:10FB000054E841EA851E64CD0B86D9F151247FD19A
+:10FB1000975ABDD73818FEAA857CD59F3FB09FEE77
+:10FB20006DB57BB9FC50EBE926F941CA2332EEB042
+:10FB3000666F37C913B25DFD010E97BA03FC7B599E
+:10FB4000BA4EEA511C4A2ADEA715CAAF9E9251BA94
+:10FB50005E931F57BA5E8FA9D0DBEB7B491EBC3B7F
+:10FB6000FD1DBA87D7B5887E216FF01B6F0912D1B2
+:10FB700070FE3DC582ED6D1AFFDABA0311D4DE5B6B
+:10FB800017BC19CF7947BD458F69739D85CEFD6D33
+:10FB90000DBA74F4537728C17694E33A84FFD6F013
+:10FBA0009AF7CDA83F8863BDC7F1BD5D6F82B316DC
+:10FBB000F7430CBEEEA2FAE2897A8E7C9A8DFD178D
+:10FBC0008CEABA8C6F6A18D64F2A453BC5DA7CB1ED
+:10FBD0008E8CAE6CA4EBE1C7387F7ECCC036D3BB35
+:10FBE000CDFA6286FA7BAFB02FBABED1D1FBB31D7E
+:10FBF0008AF7D7FEF2D51EB16F8B83B89DF1FE094F
+:10FC0000CE5FE23C7EAA18C667927FA33A1AFBEF4A
+:10FC100011764829A7CE14FC3941DCAF8C23622D24
+:10FC200048C7D2AF4F713828DEF3CE8C63E5783EFB
+:10FC3000DFD36BA2788199BDC124B7268C9843E7A6
+:10FC4000997CB75DB1E95909D43F96A1F3625CDCB8
+:10FC50003DCCC4FD024C01F2ADCE4CFEC94AC7EF0B
+:10FC6000BE41BE1EAF5E3A1E8EFEB2FFAED0FBA3FB
+:10FC7000A57D671F7B9BE17DD89D49F1D009CE878B
+:10FC8000108527FBE6743B0175F7583D263B3F2F57
+:10FC900098FF3A3A7EFE4D58A4CE37BF9EDEB3F4AD
+:10FCA000AE634FAF89F4B6333BC43B8701F3E989B8
+:10FCB000B5919F34D42379B3C7A2A3F7DD66761C30
+:10FCC000A7F70A67CAF70C4DDAF70C992D2102F550
+:10FCD000CAA44B05E120BA99E3AF205C7B5FECC876
+:10FCE000E7F26287E02381EFDDCBB81579AEBC6C1B
+:10FCF000D9750BD74BF17DBA4ADAF9AF24933CD1D1
+:10FD0000D791F29DEF58BC8B7205C80BA7AE76BC9D
+:10FD1000923FDC77AE2E147092E7B38C5B5828E0EC
+:10FD2000B5D0A2E3F009F8DD1549378174E1C33B92
+:10FD30008FF792F864B777BE8AF15880C7F1F73130
+:10FD4000C2DFDB488F27BF7973033EBB3042757437
+:10FD50003B937E14FCD1FBDD3F187F9D81F8F39A25
+:10FD6000C7A01CF1808EE408E9EFE814EFB54BBFA3
+:10FD70004796CE881F94AAC1A42F748A77DA810F80
+:10FD8000BC8A7C40EEFF5173BAC6E3397A12AEE802
+:10FD900038BF2E9D87BE874FE3FE862359679CF0B0
+:10FDA000CFC945F94DF5BD4F4D74DFACB81FAE441A
+:10FDB000FFCB8516F273EF7107BC4F2DDE31EF617B
+:10FDC000823F2C96EF98C37E86766D4B7879FF3B09
+:10FDD000E6A319DDA3DA32591ACA5F6DE2777F868E
+:10FDE0007CC77C6524E94D1F79C43D16CF03F97E9D
+:10FDF000F5F404A779DAF081EF573FA8142FC1DF9B
+:10FE000081718DE7F3ED5A12FCCC2E0E6E2FEA7B3A
+:10FE10004E3686D2BBDD924EA59E7B94ABFB6184B1
+:10FE2000938CABFD58D09B84BF8C2B8C0AC083A4D1
+:10FE3000BBFEDF8B59C7E9AFDF9FB69E913E6524BD
+:10FE40004C2584FC23ED3684EB3D89CE249C7FF346
+:10FE50006A8033E9D1B99FE749F17B1681FB2963B9
+:10FE60009A4EDA89295EA0549C6BA5323EA0511BA4
+:10FE70001F10F8BE69F0C8E209D3609D1794772778
+:10FE8000E2C737FFB73AA8DFC9A4699C8FA7C63A73
+:10FE9000274EA3F36DA6468E7C33F3D304FA7D99E7
+:10FEA0006F8F8FC473EFA684E2C9D8AF3995DB0D8D
+:10FEB0003E8EEBA2F88E8F97FC2D81F4CEEBF8BB33
+:10FEC000AC3F749E03E399391DDCB69CFB23C6B39B
+:10FED00006A2DF585F9CAC19E7F13F2D9ED9176F42
+:10FEE000BC9B7E57E4E5264FCA99D103F1911F745C
+:10FEF000EC391BDC681A8E1C2AA5F8DEF063B725E6
+:10FF000041BEF1C84B3C1F7FEC7212E0E6F6231DA8
+:10FF10003C3FEED8658C075E77E44829C5FFA2DD3B
+:10FF2000600463771C79B9D405F8A89EE06C427C24
+:10FF30002DBAD2F02A1EC3EFAD9FBF3C89E259E72C
+:10FF400025A4F378D6B558BE307AD98670C517CFB8
+:10FF5000BA6D1AB4037AE8B9C4E9BFE712A7F7206B
+:10FF6000E403C3FFF554C6F54AFE3B149F94FBEF30
+:10FF7000C78A4B96FB98EDB26F362031BAFEE57812
+:10FF8000E14768DF04C40BF7187A1F277BD2256688
+:10FF9000C338C4A3A1EFDBF09C68CEE5F18C4A6FB7
+:10FFA000A70DFD30F27378BEF952A70DF93BE6516B
+:10FFB000AFD513C1E31C653C6CF3256F1CEE937C3D
+:10FFC0008C5B84FA85BDBDA5C86FF2D18F3709FB64
+:10FFD0007FEDB8188F617F3B2EF178C31E73A7CDDC
+:10FFE0002AC6C17E60DC24E48BF96B4DE46FD47CBF
+:10FFF000A96135F55362E91F570918D7F4DDE3CE3F
+:020000023000CC
+:1000000052FCC64DEDE3719D38AE4D33AE97E281A3
+:10001000A13F8A3BED89B0C7E27D5FE60BB11CF2E0
+:100020000F89DFA7C8B77955E4FF323E2AC628DE1C
+:10003000E116F715A847F1983BFAF83A2F3679AB55
+:10004000713F150A7E5D68E4E725D305DBD10FBB60
+:1000500048FDF6B578BC97BCC0EF258541C5DB707F
+:100060003FD6EB39BF6151F277D23A57FE06EABD6F
+:10007000131D4FBF2B3632F6104BC57BF1AA391931
+:10008000785E80BCFD11E2FB1DD6AAF0DFDFE2ED59
+:1000900017CC0921FF939E23637271FFCC0FB21D11
+:1000A00064B06F4F4DBB44FB747EB82D176F3AA7F9
+:1000B0008E5CE6F918DB41B4EB9AD8A5D242BAA718
+:1000C000713BED4D3E3BEDA7B82FEBE65C3072B9CE
+:1000D000AC97DE673E378D9F5F20B793DCD17B8D79
+:1000E000786F33C3968BE58986DE30845BCFB77A31
+:1000F000FE5E2DEB0DBBD1CF2EFB78077FC7369070
+:10010000AEF715F0736055AA85DE39AB8F359928A7
+:10011000EDB8349B7E07465F9C8AF7028771707D3D
+:10012000E313055CDE4CDA68F4D9DDE1FC700433DE
+:100130009977B13CC6B6FF5B70FFBD0B8F18E368C3
+:10014000710F73599F284CD5D47760FDFE72C69FFE
+:100150006793ED47BEAC7F02EDF8341EE2B992FB27
+:100160004D049E17A5D32335FE568F4599C9DF2A26
+:1001700055157A3CA86B257D20B7DBC6FFA799E211
+:10018000E77698391DA6EA78BA4327E27C859E4F28
+:10019000DE5F7E31DD397E7A2EF5E3A57ED4FD99D2
+:1001A000284FC4310F8D2FE532590FE42F33311909
+:1001B000F13B6FF9AA6E5078BE5230C351908B74E8
+:1001C000ED629FF89D131743C21AFDF157AF6AF510
+:1001D0009DAF14CCA476B27D5DE32CF609C5217ADF
+:1001E000897EEA5275745FAD57D92BF47B03AC93CB
+:1001F000EC98B2DDFBC0273FA1F71A1C947E00FCEF
+:10020000F213F2F35B4CE95F9A9CF4FD645315A57D
+:100210005D4D0DF4FD545323A58B6E0ECD41FA5F59
+:1002200075783DFBC4EF7CACF3189CFE7E35EFCFB8
+:10023000189C8E2A051DBD9F3478795301978BDE5B
+:100240002FE0F8EC59CEE54BA0CB166BE4D0F24290
+:100250004F28F747786926A7F39E389E7716F077E0
+:10026000421D3AD68EED5F9AC9DF617F3F5947EF55
+:1002700039382279BFEFA7E9484EBB76F68C528415
+:1002800093231ABE67F9F2EF5FC5CB1D23F87739C8
+:100290005F593E7E7ABFFE208DDF8BB9DD1DE89D64
+:1002A000FAEFC76F219F5F607DE9471F088FA36248
+:1002B000DFD2BE40B91DF74192DFBEA8B7D1BE90D4
+:1002C0007428E9AF743A87736A90A07338BB087ECC
+:1002D0007886E1BD38C64C72AC03ED16B09E1D2287
+:1002E000CE7DC07E107600B91FE43E90F41E0FFB59
+:1002F0008CDB39F83AA6A983EBE73715F07B6A6700
+:1003000074E8CF08AF1D062B9E37D3546E6FE8E913
+:10031000589883FEE0459B2C0D83F1AF9745FB7FFA
+:10032000190E921F0C018701EB370A7DFD3FB97E44
+:10033000E26FC8B797737FCC407ADD5B20F915A7D1
+:10034000DB570A1CBB907E7A14B31EEF273DE6C133
+:10035000FDC75F9AC9F785A49FD2E94CBC3F03EB68
+:100360004C19C8EFE47AFAD7B98211DF4B1571C680
+:1003700081F895EBF2E37B1D057E7A27C6405E810E
+:100380007E46D65AE87E2AE9F7E2F06F2AF1FC9A17
+:100390005360E3F6179D2ADE81E5E749FF7745A51F
+:1003A000782BBF7386A1DCD27B84DBE1BC704F422B
+:1003B0003B16EA9EFDE3ADBF16FCA26F71AE0EF5D3
+:1003C0000317BFB6B8F0DCBA38A2F724CA2517DB8A
+:1003D000F93BE7D0E35C05FD4530EEC786BFD7C2E9
+:1003E000ED1FEAC35F9D4479A8F26195E4978B788D
+:1003F0005D8676AB1EE0BF6F27FD066B45BBE6F65C
+:10040000CB8BE877CD803E51FEF9C45C9F8C72F1B6
+:10041000AC871F3881EFAE571E5450CDCC8EA3BE93
+:100420001DF26777ABFCF75545BCC96CE1D75FBDE2
+:1004300093FBF5D7629C09CA2F07B63F88BF3B598B
+:10044000B7DBC0CCF07D36BE8F06E3ACF084C205CE
+:1004500012FA6DD3C6A5FE84B936A21EB96A9BF600
+:100460007BF50E6DBE36C05FF15281F04B1CCB3276
+:10047000C92FB18DEB8925DF1E28EFBA387F5C23A9
+:10048000FD74BFA477BDD5235F259EB2F0FC3C91DF
+:10049000EF86FC85AF38FC25DCEA05CFBF10C772BC
+:1004A0003CB0BEFA23662BDEFFEB5FE0FA818B9E49
+:1004B0007082F3AAE02EB227B017552BCA61771DC0
+:1004C00056499F50D761FE35FE1E6DFD4185DEA960
+:1004D000AD3B1CE4E6F0B95489E52B0E9BAD362C00
+:1004E0007F3188A1DEF922E00DFD612F267411FE17
+:1004F00011AFA88F80BFB9F8BB1512FFEAC3DC8E1D
+:100500005CB947E0A7FD363DE1D5ADB098A4817850
+:100510009278FE9DEEE97E3C61BB590FBFF79AC011
+:100520003BC3389BE3EDE5F47B1812DFC6239F2421
+:10053000A2DC2BF1AC029E7F21DBDBC43B78DF81A8
+:10054000E72AC4B3E59FC7F3EB054CC6FB9D7D14BA
+:10055000E5DE5023D9CFA53E43EA2F86D7BCFF6AFC
+:10056000140C3C3AF63992734B23CFD5AD66A43FB9
+:100570009B341DF59FD7BC853FE7CBDEB9F6E94C30
+:10058000A48F664317FD5E8C2B82BF27DF93346FE9
+:10059000DBF3305E61E43789FB71DFBC1C4466939A
+:1005A0005982AFE29FC9FF3DC00E33E9D9EA3A82D2
+:1005B000B85EED80D66ED613C77F9FAFC8D85BBA42
+:1005C0001AE572E80FC791F7C19A0EF1BB2FE2FE50
+:1005D0005623F50C7B03DE85B2BE45F54AA627D32C
+:1005E0003C5262A6D9900F352F61CEE094EFE2F72E
+:1005F0005C7F237F276F48397008BE2FE53FE6D226
+:10060000EA3924FF59217E57B27F7F887CD57A57FB
+:10061000984925BAA378F1DAC7F8EF2A7E8A7417C9
+:10062000E6A3A77A1197F6EABFBDAEC7DF67EAD99E
+:10063000C1FD2280433E88FEF9E73D3C0EAE3AA75D
+:100640007BA2D786BFCFC1F9D0CABD8ADB9634085A
+:100650001D31F746FE9E7D003DEDFDEEF70E6F9FCE
+:100660002EE2DDC6B2F1FF00786EC7F8A35C1FBFB3
+:10067000088C9BEC3FBF027EBFE37F5A1C775F066E
+:10068000ACE73BEC8C3F89D5BEDF728D4DFBFB4C5C
+:10069000D7A56B7F9FA9CF22E023E44129A7EE9E37
+:1006A000CEE599C054C2F77ABB761C792FFE699EBD
+:1006B00076BC790EED783F142F3F563CEBF7C1EF37
+:1006C0003531EE0931EEEB62DC7F154E321D6ABC2E
+:1006D000FF9FFEBF49FF0F426139640080000000A8
+:1006E0001F8B080000000000000BB55B0B7C94D54D
+:1006F00095BFDF7CF3CC7308210904C22424216058
+:10070000880324542B96C9D300D6065C2D68840137
+:1007100052C83B80B5D2167F190411105BA8D1A234
+:10072000224E82E1A1619D08C144431D14B288D6C6
+:100730008D748BFDFD56DCF828F23213A374E55757
+:100740002D7BFEE77E1F990CA1DAEE6EF2D3937338
+:100750005FDFB9E77DCFBDD414E718BE9A22446E9F
+:10076000CC59734F8410AE953D4589D942F4BDA94B
+:100770008A268710C2ED3D561F2B446DC770B129E4
+:1007800099F092BEB70CC0DBC6D93751FFC6F63F11
+:10079000BC83FEDE03AAC342FDAFB77F1C85752E66
+:1007A0007C152EC470CCFB384A105E7D49617C13E9
+:1007B000F53B089FD9AA0A7F26AD67F499D17F211E
+:1007C00055C7BD6641B0A4A5D5DC43B06A4F2BF731
+:1007D000BFE9330DEEDFD338A8DF8EF104AB8CDE3A
+:1007E000283BC173EDFA7A7E1E5F9DAAB8BC68DF14
+:1007F000F387B8A518D7F26EDC128297F133E36A5B
+:10080000F8D9C11732DD34AFA683D6891858A7A608
+:10081000C3A4E192EEEAD4D6A218E2976851441A32
+:10082000810B628B5845FCAC6A6FAE16D45E957135
+:10083000B749105F023EB518DFA71F8388A37976FA
+:10084000FA8BF877C1F745D4125AF735DFD1DB5C64
+:1008500004039D6F44E1BB8103343E73809EE92E07
+:10086000E25F0EA059881134EFC01B510EEADFE899
+:100870007B43F2DBE8E77DBFAEE10182CCE7769512
+:10088000F75DF195CAFCD7D7BBC5A5F23A33DBD3E8
+:1008900022B1AF133EF9BD392E876C4F5D5406FA75
+:1008A0008F27CCCF5193996E17F0C0C4D9CD9B88B8
+:1008B000942A1FAD9B7935DF9668EB7699C43C1F6F
+:1008C000E496BABF6B14E9C7F1E2E193A9E7CAB8AD
+:1008D000BB5D061E576476A72EA77127221C917652
+:1008E0005AEFC1E2719190EBEB80682FDE697613CD
+:1008F000AC3C20BF77C2DE1D057D3B7160AAEA518A
+:1009000006D6BB43FBAE101E860372F3B09CCABD75
+:100910008D115867407EB27D8ECBCEE38F7BDFBDDD
+:10092000F36EDADF898C7027E4D26516E53ED613C4
+:10093000FA08BED799D8083EE8DF9B0379D0BC40BF
+:100940008681E5DADB6ED2C6DDDD2C068D33B1DCC7
+:100950002E3C37981EBBF7C35FDD4DE3AB9F51853F
+:10096000859AAB4DCBE3B0FF4FB70FA6AF5CE373F7
+:10097000B5C91F1717A4AFD51D57EC2582F5BB438A
+:10098000B70F07CB5397E3890C55D29560F10A2234
+:10099000B9BAB599F59ACCCD639BC250D8092686D1
+:1009A00077272BB4FFC4FBADCEB544FF738AD66F57
+:1009B000201843B841E266825682CF98643BCC1639
+:1009C000F3C7903815C24DC5E3720C29B48EDA3ADC
+:1009D00019727D7186EB5117EDFF97334A26CD20B2
+:1009E0007842F42D15F4CD9A8B111E112D44A1FAE5
+:1009F000FE13F86EFF019380FFA8B176547E427A11
+:100A0000DAEF244321BAFBB79BBC1ED63F57843292
+:100A10004D88A53748BBF9D4E19EA68EA3F16B0C97
+:100A2000BCBFEA16D56BA371BDF5C40262F967AD10
+:100A3000C93F82BE561F53ED56DA77BE2FF9D7D382
+:100A400081B7989C169A5FEBA346C26BF7285E8726
+:100A50005C5FC02E6B6E605D17A76DB529228BE0C1
+:100A60009A3E33C69D3EA488C768DC2361514DA0E1
+:100A7000BB2673D659258AA0BA797D22ADB76C9B67
+:100A8000E9A31EAB9C7B99FEABEBDCCA7A5BE11D54
+:100A9000DC5EB567305E238C0338ADDF8C3F6E14AF
+:100AA000A2CD15197BFA3AFA7B82987059059FA658
+:100AB000C7C31E8E43AEC447D140CC1E29C4BD93CC
+:100AC0009CF1B0FB8D46C72CF021D069B2835F75D5
+:100AD00087F657806E6F7598D3405BAD5DF52AF34E
+:100AE00035F025F1FD7A820982F71F1092BF8176D9
+:100AF000A9E77526C56BC57CE221AF6755BC6BA81D
+:100B00002BE0E98F62FF244431EC62E5FC1C03FC1E
+:100B10001CCC581029BFD6ED41B11995684069FF2A
+:100B20003F30F6A8C382FCC47FB95298FE02B3706E
+:100B3000FBA8FDDE486734F47EAC352A0B748DB516
+:100B40002679C1F7B1C6BE35F8FE23A314C783B416
+:100B5000F4E1AC57262BC06B239CD0132561911177
+:100B6000FC7864D42223F47DACDD97519239801750
+:100B7000A01FF620BCFCBDA208B711DF796EA4E26D
+:100B800037D0FA011BD1073B31DA4DA02F6092B864
+:100B9000106B06D1471E89F1FF77FAEC445FC40061
+:100BA0007D24EF68CCFF229BF84330698E10DDEC8A
+:100BB0001796B35FD0F97981F4BD806495A648BDDE
+:100BC000A9DE7EB808FD35A27B3DE61545C97D143A
+:100BD000613FC0C3245473A5BC7235785FAE8C2FBF
+:100BE000BAFFECC8751973096ECB2D310316AA999B
+:100BF000F13D43F8FB958A95F5E40BB23FF8E37BB2
+:100C0000962BF6D48C01FDD6EDAA4E365DB19FAA87
+:100C1000DFEF348B147CCED59D41FDE542DAF5C281
+:100C200055367B6AB01DC1CE881FE5F68A5B05D9B3
+:100C30009B7B559C3D752AB5AB17CC02BAA7D957FB
+:100C40002CFD5E4E19C2BE7C2176D93E18F7DBA47E
+:100C50009EFB2315EF5AA23F3577B0DD256976D08C
+:100C6000E856787F8D5F1B19F7942A5EF0FC0E6AB8
+:100C70005C15A36D0EE3CA73BD888F77105A8AF690
+:100C80008658B653EE24FFF52FDA3EEF30FA0FC345
+:100C90007F1C35F992EDD475B4C6EAC4FAF3052584
+:100CA0003AE4D74A4537C393E1B56D7E5EDC33063F
+:100CB000FAF59EDBE2441ED6B8AE29127E3C4BAC60
+:100CC000B39FCE405221F65C9E7AED7C8614479C01
+:100CD000D6E582404C790AE4ADCB755BAE2B2F375D
+:100CE000E7DAF3ABFED876DBF7E0BFEE6B36C74B47
+:100CF00035E9CE983620375DAE75C2C374EBF2BAD3
+:100D0000223FA27D34F8A15E98C37EE65955705EFD
+:100D1000A1C9CF4ABF43C94FE7EF0C4D0ECB3AA450
+:100D20003F0A95ABCEEF1FD382F83EC5D1ED2C0F15
+:100D30006161FF172AF76F930B6598A5E8CA8FB515
+:100D400008C833D120FD63E252D213A2FB6EE13E0C
+:100D5000D443F0CEF0B74DAC879A7CEE817C68E846
+:100D60007BC2FBC38CE4FF3BF974E496DC1F6C8709
+:100D7000A176772D3BAB7638FF5D8F7BE469C8BEEB
+:100D800042EC33C4FE7479B95745B19D5D91A3DA45
+:100D900022ED55935704FD0E696FF883BE57D3AE0D
+:100DA00078FDC9DFC1FE14229CE4F65888DDE9F223
+:100DB000B996DFD1FDD429E13F6AA7FD9F4C917917
+:100DC00080E767166F33F0744339FCDEC98912EE91
+:100DD000D7FC5B283C45798E42716C53C6891188DB
+:100DE000D727CDFA3A366F33D17F6A4DF79815344D
+:100DF000FF54AE8427911706E1AE30B1107EFDD4CA
+:100E0000488B077C3AA54CC8437C38A5DC7F9BC443
+:100E1000E3CD0EE0F3E3F3EC849F34C9F17A5CD1C7
+:100E2000FDFFA9F9DF2BE0718A38027E381451C228
+:100E3000DF51949862A2E7D47D6953D68A81FD3749
+:100E4000E51A789E57F3DF4407F3BDEFE78AB789C9
+:100E50009A1622A410FDC979BF2D4EA1F60F7E313E
+:100E60006E32E4EB5A39F8FB88D7C9D703DFCAEBF7
+:100E7000FCE0AB3ED3A2A0B874254E167C2EDBCB93
+:100E8000720CB097724D86AE9809D1904FBF775CC7
+:100E900034E28E1E87FA8FED8F7007C9ED2CC529BD
+:100EA000313E089FF06852701C3BBCEB9174AC5310
+:100EB0006EF66439A9FD4CE3D349C837CA773D9C27
+:100EC000CE79F0AE8DE938CF94373D92EE623CDCBE
+:100ED000CDE729A3DCF7F97D37EEDC14947757E5ED
+:100EE000AB4C7FA9F57021E2EDACEB3E7BC84EE345
+:100EF000D27EA1D8A15EF788EE87101F17203FC6CB
+:100F0000F9ADC1CAFE9CD67341FECD137EF81CEC30
+:100F1000F878C6C7A6321A7729D7C8FC5920BC9BD7
+:100F2000E3A95F6C50ECCD2278FC98468C5FB44E00
+:100F30003127C00F2C1F36597560DE30A663F1864D
+:100F4000C95D685FB05AB6CFB2780F9CC03ABF3562
+:100F50003B9B1DEC6F524A260DD07F29D7CCF31650
+:100F60006E5638FFD7BF93F6445C63F03E2F69F2AC
+:100F7000175F5B14C8E5479A5C6E5DFDEE91045AFD
+:100F8000D71EEBBE0CBFF1CEE3A753FDD45E1073AA
+:100F900036137A9E66763F55817D37599CD84776C1
+:100FA00056A21A4FE3A7FC34F731C085AB173D5565
+:100FB000017FBBCDCAE7369DBE958AD3007FFC4634
+:100FC000E38F17836F671EB772DEBEB2717CBC18E9
+:100FD000C24E75B89BE4EFA083CEDE7A2BC317EA2E
+:100FE000EDC241FAB0AF3E81F117EB1D0CC53CA933
+:100FF0005F2BB5F3F1B5D69BFA55B870503E9BBD4B
+:10100000C1261CE4A792E25CA3F2689F69136B9A65
+:10101000366AFB4AA3F9933DC9F9E043F6C6155D6C
+:101020004879CD79F23CF6D6890D4970CACB567F06
+:10103000B8A382FAE7E4958CCBA376EBF6CFB9AEF2
+:10104000F046C7C30BC0EFF2268BDC9FB6EF338FA1
+:10105000A7C73F45EB7BDE34F179BF6EFB873B369C
+:10106000125CB279853958DFBFEB7E93357ABECDFD
+:10107000AEAEC5877FDCAE1E4962FB6922BBCAFCEF
+:10108000E7EDAA6EF51AE6DFFD7925B3C0F7332642
+:101090004F12ECE9CC849B59CF3D8714E6BFEEC7D5
+:1010A000F5F9C5DA7EAB0CBECDD39307FCF84591BC
+:1010B000CDFC3DDCF1693AF2DE8BEDF3FFEEBE0FC5
+:1010C000D2BEFDB4EF76E2AF7FFCD5FDD3CCEE719E
+:1010D0004EDADF3483CC77AFCA5BF30C5ABDA0DBAA
+:1010E0005C122979AEA02EA3C54F8A639E68A2A781
+:1010F000BA53F18765219EDD72D688F31E9D1B3F92
+:101100000ACE23E8E7A3A0B87D2D7ABF0DD6629D55
+:10111000B401BFFBBD3F19843F284EDFD81326FC26
+:1011200041DFBD723EA13633C9A9B76324FB05C8B0
+:10113000CD887A5CC78426E067CD528EBD07296FC3
+:1011400092751CA14E1BD8E7D98EF359F0B3A1FBC1
+:10115000AD7DE53CEB4775FBC39F2BBCFF99678DCD
+:1011600059DFBEFFC3BBCE67417E674D3DD370DE06
+:10117000EA35F764410EB5AF4A7FFE8FF2416FAF9B
+:10118000D8401B213BAF55ACAC2785EA05AE1BF41C
+:101190001E937583DA8E9DEC4FFB3B65FDA6CED08A
+:1011A0005D148F7AC7F20FBBE0CFFA13E4398AD609
+:1011B00077816FD3C76971D0D8973487FCDA4B57E2
+:1011C000F4419EFFCEC07EC7631D5F35FC80C80A18
+:1011D00017C82BCEC19EA97DC1AAE4F5D0F333DE9A
+:1011E0001153E01FDFCAFA6B2DD7FB5E0BB7AB9C28
+:1011F000F7506B90FCAEECC3AB0AD7A07A40B87046
+:10120000058DAB333B7EC4F9F1715520AFAB9B2804
+:10121000ED49BC22EDA966DD617342D07A3B604F97
+:101220004CB7CC1767BDF657B6CBD5335C9DB0CB6A
+:1012300070F842AC9710ED55146D1CC9BF56A32130
+:10124000A2533BF717ABDC5FD7AE8A91989310E9B6
+:101250004DA37D148B2D46E4D3B3846F3AEA36C296
+:10126000D8F3AB9BA87FF66BEAD44D82CF4F0B4BE4
+:10127000F85CE94E5D89FCC8A0687CF565CF098EF5
+:101280006779324E4D57158E637D23C3394F993997
+:10129000AFA614F4EAE3B286C971B40EE759C2DB13
+:1012A000973507F6E9EFCB9A1B3930EECED7C297C8
+:1012B000735C14BEEC3B83BE13962FEBA35F501CF4
+:1012C000819ED45D94F58E42F5EB27909FAF3C4410
+:1012D000FA82FCD090FC9E017E9CF80CB99E27B946
+:1012E000BA107FDCC2E582FD4C1AE185FDD4ED53D6
+:1012F000841175A20E4B13EA48B5A69E38E8F3C6D2
+:10130000F63F9AA1CF756DEF9A1D93305FD69DC8B9
+:1013100020D98FD769F1ABA67DFC7BA8F3D51C93B0
+:1013200051B4C6F82E9FDFAB0EB4F239BD5AF8F9AE
+:101330009C5EDD32585FFA131C5C1709B58FB07CD8
+:10134000C720BB98B94DDAC59DAA580E3F27B43ABD
+:10135000EDCC8478CE4706E6C97CD7A59E7F08F9F8
+:101360004B2045712AB45420CCB30E7991275DE609
+:101370003381DFBD90BD94FD8A37FB76DA5740CBD1
+:1013800077676ED86A5483E899D929EB92813051F6
+:101390007E90E5ED1E0D39085749447E0EDB55164B
+:1013A000FC6AC020EBA8A1FBA8D7EA45C7514FCAE9
+:1013B0001CA07B7662A2F463C2CBFAD36590DF7780
+:1013C00019A87FCAC0FCC5F972FEC07948D6C1AE63
+:1013D000E55776917CCA483E7B48CE80CF533C2E61
+:1013E000233FD342F118F8BF523C06F4D56770FB97
+:1013F0004BF54EC60FD4DFC0F8C17A17E3EDF5C543
+:101400000C5FA92FE1F6E320F5FBF8DFD38DD08741
+:101410002ED8D8A801FC644C083E6AF0F89331CA73
+:10142000607C94C2E3B3F39F6EF464A26E6AD7EC5F
+:10143000DB1189FCEB8C4DD6A1CED8641DAA759426
+:10144000FBA67CEA2F9BB976973C87BAD231AE20B7
+:10145000663E9F5FFBE9FC0A7FB422DF9D07B91C53
+:101460003B969FBA95FDA48DEBA027EFBA2E9AEB81
+:10147000806FD2799C3E9D9B31755D36E1B9110A32
+:10148000EB2FF98BEB4BF47325AD93DF29EF510A6A
+:10149000D5EA32ACBF72A46D2AFCEF172EF7ADA0CF
+:1014A00043E777D1A865A9C887BA4C8EF750C7F52E
+:1014B000FCDE24709ED2EB7DFAB80E57EE5D9837B5
+:1014C0003363DCBA29F03B6464F0732EB368015DCA
+:1014D0002E43B8B296FD96C3083F7097A6C7790E03
+:1014E0009917FBCD0E630CEA3761B9B11E9AD7A5E7
+:1014F000C9F99826E7E39A9CDF469D8CE03BD40E21
+:10150000D84DED809374FE1AFB986F4FE49594B11B
+:10151000FE8ABE24E07A5D7016EC4BFA9B24E8F557
+:10152000664D7F13347FD3955B5225E7F9789D2A6A
+:10153000ADDE765EBB07D1F7ABCF1B982F18CEBDC3
+:101540005E78ACF0F32FCB73A7184DF908E1735F09
+:101550008E673FA45A6FCFFC84EC7CEE54790E105A
+:10156000FB2D725C82230776B256ABB7F67A0D1E5E
+:1015700013EAD331DDE93188BF9A7DE9F8C1BFA90B
+:10158000ECAF6BA6104EF05545EEAF666E77FA30B5
+:10159000CC576C06AE6F37C9FE139AFDD5A468EB25
+:1015A00069FB11565F12E41138F472D262C23745FA
+:1015B000F8974ABFEF4F677F2DFCE973E11715DFFE
+:1015C00007C2497965C1D4C5C691E0876F07F0EAC3
+:1015D000829CC5C61BD1DFFA813DB87F842F49B1FB
+:1015E00003CF96FD235A770C7306E1A6973E40BFC2
+:1015F000D990B3B880F0D916EFB17AE8CD8B52BF4D
+:101600006CFBDA4E836F551D326FCFDBD776E12549
+:10161000C4E5B64827DCFBDEFC64E6F7DA8EDD9B2A
+:10162000A16FBDADF23E6053CB1F77FC92C75970DE
+:101630004D42EBFAB2057D67C591FF5804BA668743
+:10164000FBBE04FEE091194CE7ECE1D2AE1F3E92E6
+:10165000B71876DADBB6EF67B0BFD9D194D0829EE7
+:10166000176C5C87A8DC3FA10076DA1BD9BD00EBC4
+:10167000D73E6F71424F2BF7C7E7A13E70305FD660
+:10168000C32B266E49429C35BCB277D72F71BFFA67
+:10169000BC8DEF85EA62649E57A9364E5BC1F2DBD2
+:1016A000B9EB69D0BDD7C6F7B315A855115EB12BFC
+:1016B0008DEBF8AF7EF3F102C8A150DDBE0BED5FFC
+:1016C0003E6733800F27CCAEE89B6187274C7CDEDA
+:1016D000ACD0F08A93C3253DE13D452CBFD82D49C0
+:1016E00088B395C37F7E1BE89EAD6ED981F38ED8FB
+:1016F0006DE1BB89B37B896F34EF6CB3690AA4DCFD
+:10170000BB37D2087D39AF6C59F014D66F96E3CE53
+:10171000DBB6303F3DCDE305BE47E304FCD679653B
+:10172000EBA0F6B3CDBBB3701E3DF7FC6C3E97EA61
+:10173000FAABDB4BE573964171913D01F9A34AED9C
+:101740006F61F788088AB7151A7AEEE093BD4F8962
+:1017500081F9E75A4C7E33F1A8C222D6596306ECD0
+:10176000A132F19662ECAFD2D0988EBCA5626ACF5E
+:1017700002D8C5599BB026D0B8B7B4B8557960CD5A
+:101780001CE4BFD7A2E7B2E68F2E26C8F875B1DDFC
+:10179000E60DBE970C85EFD70BFBDB6903F83DCB5D
+:1017A0002D9CC3EBEBBD65F655E39C561B23FDC793
+:1017B0000734BE85FCD8375ABC5BB86AF0F8FEFC2B
+:1017C00018FE7EADB9271DF14F5F3F90AFFBB59E70
+:1017D00074F8ABD079B3918EC08FBCA0B01FA93C78
+:1017E000A07CA8129F2AAD1EAF0ABE08B3BE4FE36D
+:1017F0006545CE4B98A6F19DE66E2848E6EF56B6B5
+:10180000D85C369A5715D61385BCA83AB2270AF980
+:101810004EEF2BAA68D2C4151BA7C92745135950F0
+:10182000BDB1C26772D9B2869033F2271AB70C7F66
+:10183000D3F79F2948E1FD94B787F3F784BD671A72
+:10184000F4B47CFBE079D8973DC8FE7ADB77C60517
+:101850009FCB5334BA03CA876C27816F3E4A82DC20
+:101860002B0D621DEE2FCFD11CDC6B122EAC12E7BC
+:101870007BCFCABF4484415FCE5DAC66BBED557A79
+:10188000D8AFBD533087FD52AFA987FDDA1B47EEB5
+:1018900064FFD03BAC6701FCD43B05CB64FFC89E22
+:1018A000050EEADFA7E36304C7FDF78FD4B0FF9806
+:1018B000ADCA771562A7C92EEB411B4ED6F3F9C20C
+:1018C000E4083E7F9F2AD0EA3D03F2E173976E372A
+:1018D000BDC2B1EF00ECB03C82EB3A9447B5BC849A
+:1018E0007C6F7E9C13EF35CA314FEA8139F8BE31E7
+:1018F00036E6D252C8E7F6D1EEA2821CDC6FF6F0D3
+:101900003982B49AE34DEDEF2C7C9E0C98FA76C1A7
+:101910004FA58F76CF2A203AAACDDDEBB389A40B51
+:10192000A69E2E94C867A9D21F89DD52AF7A33775D
+:10193000CA7B1AEDBEF22E8DFF820E318DD00B4583
+:10194000CAF78DF6FD6FC3AFF4768F637F1C6A37DD
+:1019500067DB1F8B827FF813C5714FD079FF4F8BE8
+:1019600076F33DEB3CBC0721B878DD607DE8FFFAFB
+:10197000763EF789CD41EDD0C386C178A81E411FC0
+:10198000FD83FC8E87F9BE4DB3ABAABCEE5AF0E1E5
+:101990000A3E977035087F3D040F192F4A649EB0A8
+:1019A0000DF19FF8513DC67F92CFE9FB4C027E7C42
+:1019B0002DC52FC6DBC2BD38AF18F6517C8A95F114
+:1019C0000971A12AAA9BEB53BD6D16BEEF7DB0E352
+:1019D000D324EC9FF490EB30551D2FC7E1FCBE578C
+:1019E0003B2F501C8CE3F7316D1D713877E8EDD536
+:1019F000065F3AE8A28C88F375BDBD46F5A783FE65
+:101A00002AA53B0BFD7B41378F275C052E781FD520
+:101A10008AB477D1A1B23F0F95DB939ABE925FC88B
+:101A2000E2F71DAFC8FA80EE072A347FF23ADA33C4
+:101A3000A5DDDBF57B259A5A017B1FC23F2414E804
+:101A400079F172AEDF3C5EE090B8369FD795F52510
+:101A5000EEAF7DF57C564A26E669E382FDD0B801FB
+:101A6000BF02FB4F60FB7FD01447FBAADCA138D735
+:101A7000C24F95AE29A2E16299714511D7CD8487F5
+:101A8000CF6DA17485EAD1E402C9A74AC3B0C2D818
+:101A9000A0F5CE914F4F98C27EC60FBFF393D847A3
+:101AA0008B50A7F871A97C377025DE04DB39F6B3BB
+:101AB0005DFA7198CD65C3D57ABC6C79E3FAF821EB
+:101AC000E808A5B3C2DD5814E7B8BA5DA7F79C4D86
+:101AD000A72FCF3422980FF3D6148D20B8CCFACF8D
+:101AE000F241EEF75C87C58FB85A51BA627DF410A7
+:101AF0007A73553CD81E14BF52205F2FDF6F5C8B6A
+:101B0000FE5058ADF84FA25E24C8AE9AD9BEC85E4A
+:101B100082E2C28D05217587F2456391570BF7A2CA
+:101B2000B1883364570B9C439C2FC9418E32F09B84
+:101B3000110FC3507AFE5C20DF25DD5820ED7CF5C7
+:101B40000C57007EF366D5C07978E87A5F15C87CBB
+:101B5000A23B2EF23EFD3D07847DB32AF99668E84C
+:101B60007F07F6961817E9C07D50617EB81C77C8CC
+:101B70006647FD2670E812D777030F45CC93F7062A
+:101B8000116224F577254C6A0A8E23BF2994FB0D38
+:101B9000CF96794B5D86E9EFD7873223AFD487386C
+:101BA0006FC80CE7FB92DEF62F386E053A73ECB87F
+:101BB000D7E8EDA6D321D953DD37FF1D87F8DADB4F
+:101BC000F9677E87D6FBF5A7FC3E6DA3F63EF0F5E0
+:101BD00076ED7D57B72312ED81E28F8B306E930641
+:101BE00007EA04B25EAC43FDFCABD70382CEC1A3CF
+:101BF0000B873E07C7B82382EB048EF8A1EA2AC1FF
+:101C00007582D434592700449D20D524EB04C0515B
+:101C10002700449D00EDA81300479D0038EA04C04A
+:101C2000512700449D00ED5FCE93EF6502A4C4B23E
+:101C30007E19C1FEFDDE66D58BFCFCDE43F21EEA9A
+:101C4000DE4685DF695DA0EF23CE5DF55EE780F6B9
+:101C50005EC7B795EFF5EADA5427445567EA3B8A41
+:101C6000BA4E5DABE25C03FF523F8FBFBFB133E7BB
+:101C7000BD52B4379B9C0607E474310EF5AACACE58
+:101C800066AE3F15C41F32B37C5B14817AE99D16A2
+:101C900079CEAD51A9750ADF87721E5C63E9E6F360
+:101CA00047D51EC55E167C9F7BC3E7EC07D6DAA23C
+:101CB0009A40678DCF662F1BE2FD07DF0B3BC49573
+:101CC000FBE6A57288A88928E2FBE6A5B867262866
+:101CD000D4AF8D7C7F4C07D3E1D047BCABCA805BCF
+:101CE000B74BBB0F794F55D9D9BA3E515C7D0F8D9B
+:101CF000CA00E41F7AFFEC2E8C8C3D1D0E47212676
+:101D0000236F2A7EBC6C5F1B7DAF7F8B85F38E15A6
+:101D1000F9EE65D0A3A32617D7498E1EB2F1F9E8D4
+:101D200093ADE307D549BE70B9AB0BF97E7E34D7CE
+:101D30002D569A148ECBF9C5E3E2F9DDC03113C7F5
+:101D40009F0E57492DC6AD9CE4E0FA54A145DCC76F
+:101D5000EB68EFB408B23D15AE55BC06C21709A733
+:101D600019F6B390D8C6FA628AD880F7540B857CEE
+:101D7000DFA0EBCDCAAD0AE7055C2888C3BDA4E4AB
+:101D8000EFC2CE7FBB84F70B4B2C327F4D34C8FBA8
+:101D9000ECC44DF27DCB4F84DB8C78BB8CE22220EF
+:101DA000C5C9DFF550BB3B7C7492CCCF1DF1587F89
+:101DB000D17113BFF72D8CFF61BA9BE37501BF632F
+:101DC00050FC77AB97AFBBB6FD84BE63386A92FE1A
+:101DD00085F8C8E7A22EE825D767DC0C8FD79733A4
+:101DE0009C3443FAC72BEF12494676D01FDEF70129
+:101DF000CE8B89F1914EF83BDDEEAF7A9F1826A18C
+:101E0000FE3E710C4111F43E71B3CBC1FE2ED17078
+:101E100062AA03FCF84B8413FCD0DF29AE9E51B2BA
+:101E200013727245090FBE8B7B942DC4D7226C446C
+:101E3000419DDBE75251B73EA4D8F95DF4557E725F
+:101E4000EB4378C75397AAD81507EAE15B0AE38802
+:101E5000EEA29464A6BBAE5DD64B994371A8A76B66
+:101E6000F6E072B7158E18689FADD9452F8D977A19
+:101E7000729317FAF61DEAA8CF61BC47D89CCDDA59
+:101E8000790D729F7DDD18AEA7EA7AD3DF12DF04E9
+:101E9000BD79B350C699D2D2774DC803BA72DD4727
+:101EA000B0FF05659F3F14C7FB1BBA8E457E94EFBC
+:101EB0002543EB58BA5FDEA5D5C1E13F8D5A9DD5CC
+:101EC000A8D5598D5A9DD5A8D5598D5A9DD5A8D537
+:101ED000598D5A9DD5A8D5598D5A9DD5C8F5BBE5C4
+:101EE0000CDFA95FC5B0BBDEC3FD41FEFFFD6BF893
+:101EF000FFD03AE8C718175A0715564734C751B2EA
+:101F00006F597F0EA97B160F5FBC81F897DF607653
+:101F1000A249AF83E2FDF2BD11EC0F2E140E59FF62
+:101F2000D4F916C1F5D27E619B02FEE7658C331AA7
+:101F3000A8FF2F9A1CF4FA23EC03FB837D00C23E1A
+:101F40008C6903F6F18C994C385BC67B0FC77B1B01
+:101F5000CB75FD1AF21F842F11F641FEE34288FF74
+:101F6000A083C75DA06369A77CD7A4BFDFCC23F0A3
+:101F7000D59421FC894FFA933161BEBDF8CE98DA31
+:101F8000307E1F7C547B8F7574A37C1757264AF8CC
+:101F9000BB43F89528C863C9F0BE0F9EA6F14B1E3F
+:101FA00089E0BC65FDC8A5D3FE377EE5F342C98F45
+:101FB000DFD6FB2B3F215A0AC2A4FE15984506EE38
+:101FC0006B84218CEDA050DDACE07E74E53D623287
+:101FD000E45C6029D90E3AE3B5FB6D11ABD55B8D9E
+:101FE000DD15BB093F1197E8C4BDD6E8848302EF35
+:101FF0009F0AEB8A33E117FD63DC138A72F07E7966
+:102000008B82F9E19972FFB717873741AF0287C614
+:10201000E740DE732D8E36D4019C45094B70CE9F70
+:102020001BEDC8411DC0D9354AE2F18E36C5895431
+:1020300036614901BF3FB36EF9C48A776B8A88A6BF
+:102040007D5986B973F09D9AE2CFE4B959F4711CB9
+:10205000BBB1489EBF46BC2EFCB8B7EA9B19C9F776
+:102060006722D391837ECA2BBF5F44FA77E407AE21
+:102070009B0013353AE3718BA842AADD36C0E3DA40
+:102080007D5E97C15D0A5814E53172BBC19B0DF8A6
+:1020900096C1F753B4933E17619DA2C7264FCC203B
+:1020A0003CD1E2633FD9E172DD02FA5E9CE12A068F
+:1020B0000CAD9F43B638E7133DB7A23FF41D962EF3
+:1020C000CF254552EFCB8AA4FF98BE56DEC786CAFD
+:1020D000BDACC8A0F9B7BF4F37D15B8AEFE9F48B2D
+:1020E0002D8BB2410FD17B0FF641F42E001411312C
+:1020F0005CEFB8B69E79F87B654552BFC89F557DA9
+:1021000022FD19C374A37718F2C7510F788781DEB7
+:10211000518D7D36FC3B8C673D7D36C4F76757F7A4
+:10212000D9D0FEAC4BBE930E5DBFB148BE9F489F59
+:10213000DEC7F3C7D2B7BA394FEF1B863C2ABDFCC6
+:1021400093F5F2DE2583E3CB582DBE8C7D20A5BD13
+:1021500087F46DEC93D17CBF2D0A62B9BFD22AED12
+:10216000B4F281B2836D04C76F237A83F2AF095E44
+:10217000A27B505E64EC97EF2D09079FF6981887B5
+:10218000CE22BFAA11F2BDE528CD6F206F2B25BF4F
+:1021900050537EE412BF03C07CAC8F3B5BE85FBB57
+:1021A00049E214AE711E5D366F4D179F0FB75D6922
+:1021B000D7CE9BADEB717EA6FC6D507B65D9E12E31
+:1021C000C49BAA3D83DB6B967FCEE758CADF06B57A
+:1021D000DFF3D30FF99D4D5DFBE07692EF5390BF97
+:1021E0002EDFA326DF049CF78ED68439E5BF1FF0CF
+:1021F000AD80BD375547F0FBD99DBFC963BDD1E563
+:102200004DF39BBE9B7EACE5F19E3C91017BF83685
+:10221000D80BFF9436C83F79B8CE372B92FD4E9D30
+:1022200076BEAA2DB3739C4FACB5B2FF2A54C39CA3
+:10223000C06B8DD2CF886255F3533EB6FF13B70DF6
+:10224000E37A1E6F0078CC247E771CB756E27D239C
+:102250002CEC1F0A0D25D5BB091E312C673F908041
+:10226000179724F767E01F54D8AFBC7FA833FB143F
+:1022700079BFEFC8C17957BF6F6AD8E86D3D80F369
+:10228000B2E27D7229EA8A7744F0FD4100F546DA30
+:102290004FC330E9471BE6A7731C088892D215C8C4
+:1022A00043E68571FDB16198E351DC2736544CE477
+:1022B0003CFAE0DF64DCED9B6375228F6A98EC5892
+:1022C00083F72A0D0F38B8FF5545AEE77954F2A7CA
+:1022D000618EDC7F43450C9F7B74393434BA46E20F
+:1022E0007E6AC618F77F426EA3B4FBB986646A277C
+:1022F000F8845232FF27586792A477D20C07CBEDAF
+:10230000E8FC898FEE727038F1E39EA86E56E4A067
+:1023100073F1FF008751D9F610370000000000006C
+:102320000000000000000000050015000000000093
+:00000001FF
diff --git a/firmware/cxgb3/ael2005_opt_edc.bin.ihex b/firmware/cxgb3/ael2005_opt_edc.bin.ihex
new file mode 100644
index 0000000..c1d6e5d
--- /dev/null
+++ b/firmware/cxgb3/ael2005_opt_edc.bin.ihex
@@ -0,0 +1,69 @@
+:10000000CC002FF4CC013CD4CC022015CC0331051C
+:10001000CC046524CC0527FFCC06300FCC072C8BF5
+:10002000CC08300BCC094009CC0A400ECC0B2F7207
+:10003000CC0C3002CC0D1002CC0E2172CC0F301241
+:10004000CC101002CC1125D2CC123012CC131002DD
+:10005000CC14D01ECC1527D2CC163012CC171002DF
+:10006000CC182004CC193C84CC1A6436CC1B200755
+:10007000CC1C3F87CC1D8676CC1E40B7CC1FA74634
+:10008000CC204047CC215673CC222982CC2330028D
+:10009000CC2413D2CC258BBDCC262862CC273012A1
+:1000A000CC281002CC292092CC2A3012CC2B100262
+:1000B000CC2C5CC3CC2D0314CC2E2942CC2F300287
+:1000C000CC301002CC31D019CC322032CC333012AB
+:1000D000CC341002CC352A04CC363C74CC37643591
+:1000E000CC382FA4CC393CD4CC3A6624CC3B5563D5
+:1000F000CC3C2D42CC3D3002CC3E13D2CC3F464DC1
+:10010000CC402862CC413012CC421002CC43203289
+:10011000CC443012CC451002CC462FB4CC473CD452
+:10012000CC486624CC495563CC4A2D42CC4B300296
+:10013000CC4C13D2CC4D2ED2CC4E3002CC4F100230
+:10014000CC502FD2CC513002CC521002CC530004F0
+:10015000CC542942CC553002CC561002CC572092B8
+:10016000CC583012CC591002CC5A5CC3CC5B03176C
+:10017000CC5C2F72CC5D3002CC5E1002CC5F294289
+:10018000CC603002CC611002CC6222CDCC63301D39
+:10019000CC642862CC653012CC661002CC672ED2BB
+:1001A000CC683002CC691002CC6A2D72CC6B300264
+:1001B000CC6C1002CC6D628FCC6E2112CC6F3012E1
+:1001C000CC701002CC715AA3CC722DC2CC73300209
+:1001D000CC741312CC756F72CC761002CC772807D2
+:1001E000CC7831A7CC7920C4CC7A3C24CC7B672452
+:1001F000CC7C1002CC7D2807CC7E3187CC7F20C4FC
+:10020000CC803C24CC816724CC821002CC83251482
+:10021000CC843C64CC856436CC86DFF4CC876436F1
+:10022000CC881002CC8940A4CC8A643CCC8B40168C
+:10023000CC8C8C6CCC8D2B24CC8E3C24CC8F643518
+:10024000CC901002CC912B24CC923C24CC93643AD9
+:10025000CC944025CC958A5ACC961002CC97273165
+:10026000CC983011CC991001CC9AC7A0CC9B01003E
+:10027000CC9CC502CC9D53ACCC9EC503CC9FD5D5A0
+:10028000CCA0C600CCA12A6DCCA2C601CCA32A4C1E
+:10029000CCA4C602CCA50111CCA6C60CCCA7590093
+:1002A000CCA8C710CCA90700CCAAC718CCAB0700B4
+:1002B000CCACC720CCAD4700CCAEC801CCAF7F5092
+:1002C000CCB0C802CCB17760CCB2C803CCB37FCE7F
+:1002D000CCB4C804CCB55700CCB6C805CCB75F11B8
+:1002E000CCB8C806CCB94751CCBAC807CCBB57E18B
+:1002F000CCBCC808CCBD2700CCBEC809CCBF000010
+:10030000CCC0C821CCC10002CCC2C822CCC30014CE
+:10031000CCC4C832CCC51186CCC6C847CCC71E02D7
+:10032000CCC8C013CCC9F341CCCAC01ACCCB04464C
+:10033000CCCCC024CCCD1000CCCEC025CCCF0A0074
+:10034000CCD0C026CCD10C0CCCD2C027CCD30C0C3A
+:10035000CCD4C029CCD500A0CCD6C030CCD70A0094
+:10036000CCD8C03CCCD9001CCCDAC005CCDB7A069A
+:10037000CCDC0000CCDD2731CCDE3011CCDF10012D
+:10038000CCE0C620CCE10000CCE2C621CCE3003FAB
+:10039000CCE4C622CCE50000CCE6C623CCE70000C6
+:1003A000CCE8C624CCE90000CCEAC625CCEB0000A2
+:1003B000CCECC627CCED0000CCEEC628CCEF00007C
+:1003C000CCF0C62CCCF10000CCF20000CCF3280617
+:1003D000CCF43CB6CCF5C161CCF66134CCF76135D8
+:1003E000CCF85443CCF90303CCFA6524CCFB000BC6
+:1003F000CCFC1002CCFD2104CCFE3C24CCFF21051A
+:10040000CD003805CD016524CD02DFF4CD034005D4
+:10041000CD046524CD051002CD065DD3CD070306BE
+:10042000CD082FF7CD0938F7CD0A60B7CD0BDFFD2A
+:10043000CD0C000ACD0D1002CD0E00007CC7AE59C8
+:00000001FF
diff --git a/firmware/cxgb3/ael2005_twx_edc.bin.ihex b/firmware/cxgb3/ael2005_twx_edc.bin.ihex
new file mode 100644
index 0000000..9b5e9e5
--- /dev/null
+++ b/firmware/cxgb3/ael2005_twx_edc.bin.ihex
@@ -0,0 +1,93 @@
+:10000000CC004009CC0127FFCC02300FCC0340AA22
+:10001000CC04401CCC05401ECC062FF4CC073CD4AD
+:10002000CC082035CC093145CC0A6524CC0B26A25E
+:10003000CC0C3012CC0D1002CC0E29C2CC0F3002E9
+:10004000CC101002CC112072CC123012CC13100242
+:10005000CC1422CDCC15301DCC162E52CC1730121C
+:10006000CC181002CC1928E2CC1A3002CC1B10029A
+:10007000CC1C628FCC1D2AC2CC1E3012CC1F1002A9
+:10008000CC205553CC212AE2CC223002CC231302BF
+:10009000CC24401ECC252BE2CC263012CC271002DB
+:1000A000CC282DA2CC293012CC2A1002CC2B2BA28A
+:1000B000CC2C3002CC2D1002CC2E5EE3CC2F0305CD
+:1000C000CC30400ECC312BC2CC323002CC331002BB
+:1000D000CC342B82CC353012CC361002CC37566360
+:1000E000CC380302CC39401ECC3A6F72CC3B1002A4
+:1000F000CC3C628FCC3D2BE2CC3E3012CC3F100288
+:10010000CC4022CDCC41301DCC422E52CC433012BB
+:10011000CC441002CC452522CC463012CC471002EC
+:10012000CC482DA2CC493012CC4A1002CC4B2CA288
+:10013000CC4C3012CC4D1002CC4E2FA4CC4F3CD422
+:10014000CC506624CC51410BCC5256B3CC5303C493
+:10015000CC542FB2CC553002CC561002CC57220BC7
+:10016000CC58303BCC5956B3CC5A03C3CC5B866BCE
+:10017000CC5C400CCC5D23A2CC5E3012CC5F100274
+:10018000CC602DA2CC613012CC621002CC632CA2C8
+:10019000CC643012CC651002CC662FB4CC673CD452
+:1001A000CC686624CC6956B3CC6A03C3CC6B866B2F
+:1001B000CC6C401CCC6D2205CC6E3035CC6F5B53C3
+:1001C000CC702C52CC713002CC7213C2CC735CC395
+:1001D000CC740317CC752522CC763012CC77100264
+:1001E000CC782DA2CC793012CC7A1002CC7B2B8229
+:1001F000CC7C3012CC7D1002CC7E5663CC7F0303C6
+:10020000CC80401ECC810004CC822C42CC833012A6
+:10021000CC841002CC856F72CC861002CC87628FA2
+:10022000CC882304CC893C84CC8A6436CC8BDFF424
+:10023000CC8C6436CC8D2FF5CC8E3005CC8F865689
+:10024000CC90DFBACC9156A3CC92D05ACC9321C299
+:10025000CC943012CC951392CC96D05ACC9756A30E
+:10026000CC98DFBACC990383CC9A6F72CC9B1002E6
+:10027000CC9C28C5CC9D3005CC9E4178CC9F565354
+:10028000CCA00384CCA122B2CCA23012CCA3100209
+:10029000CCA42BE5CCA53005CCA641E8CCA7565381
+:1002A000CCA80382CCA90002CCAA4258CCAB2474BF
+:1002B000CCAC3C84CCAD6437CCAEDFF4CCAF64378F
+:1002C000CCB02FF5CCB13C05CCB28757CCB3B888B5
+:1002D000CCB49787CCB5DFF4CCB66724CCB7866AAC
+:1002E000CCB86F72CCB91002CCBA2D01CCBB301196
+:1002F000CCBC1001CCBDC620CCBE14E5CCBFC62101
+:10030000CCC0C53DCCC1C622CCC23CBECCC3C623EA
+:10031000CCC44452CCC5C624CCC6C5C5CCC7C625A2
+:10032000CCC8E01ECCC9C627CCCA0000CCCBC6289E
+:10033000CCCC0000CCCDC62BCCCE0000CCCFC62C74
+:10034000CCD00000CCD10000CCD22D01CCD33011C8
+:10035000CCD41001CCD5C620CCD60000CCD7C62139
+:10036000CCD80000CCD9C622CCDA00CECCDBC62358
+:10037000CCDC007FCCDDC624CCDE0032CCDFC62551
+:10038000CCE00000CCE1C627CCE20000CCE3C628DC
+:10039000CCE40000CCE5C62BCCE60000CCE7C62CB4
+:1003A000CCE80000CCE90000CCEA2D01CCEB301108
+:1003B000CCEC1001CCEDC502CCEE609FCCEFC600BA
+:1003C000CCF02A6ECCF1C601CCF22A2CCCF3C60CB0
+:1003D000CCF45400CCF5C710CCF60700CCF7C71806
+:1003E000CCF80700CCF9C720CCFA4700CCFBC728D3
+:1003F000CCFC0700CCFDC729CCFE1207CCFFC801FE
+:10040000CD007F50CD01C802CD027760CD03C80377
+:10041000CD047FCECD05C804CD06520ECD07C8054C
+:10042000CD085C11CD09C806CD0A3C51CD0BC807DB
+:10043000CD0C4061CD0DC808CD0E49C1CD0FC80906
+:10044000CD103840CD11C80ACD120000CD13C821FF
+:10045000CD140002CD15C822CD160046CD17C844D4
+:10046000CD18182FCD19C013CD1AF341CD1BC01ACA
+:10047000CD1C0446CD1DC024CD1E1000CD1FC025AF
+:10048000CD200A00CD21C026CD220C0CCD23C027C3
+:10049000CD240C0CCD25C029CD2600A0CD27C03001
+:1004A000CD280A00CD29C03CCD2A001CCD2B000050
+:1004B000CD2C2B84CD2D3C74CD2E6435CD2FDFF487
+:1004C000CD306435CD312806CD323006CD3385654B
+:1004D000CD342B24CD353C24CD366436CD371002B7
+:1004E000CD382B24CD393C24CD3A6436CD3B404524
+:1004F000CD3C8656CD3D1002CD3E2807CD3F31A7DD
+:10050000CD4020C4CD413C24CD426724CD431002D0
+:10051000CD442807CD453187CD4620C4CD473C2466
+:10052000CD486724CD491002CD4A2514CD4B3C64FB
+:10053000CD4C6436CD4DDFF4CD4E6436CD4F100238
+:10054000CD502806CD513CB6CD52C161CD5361345A
+:10055000CD546135CD555443CD560303CD57652455
+:10056000CD58000BCD591002CD5AD019CD5B2104C6
+:10057000CD5C3C24CD5D2105CD5E3805CD5F652485
+:10058000CD60DFF4CD614005CD626524CD632E8D55
+:10059000CD64303DCD655DD3CD660306CD672FF7C5
+:1005A000CD6838F7CD6960B7CD6ADFFDCD6B000A45
+:0C05B000CD6C1002CD6D000052A76B0E48
+:00000001FF
diff --git a/firmware/cxgb3/ael2020_twx_edc.bin.ihex b/firmware/cxgb3/ael2020_twx_edc.bin.ihex
new file mode 100644
index 0000000..8b1337f
--- /dev/null
+++ b/firmware/cxgb3/ael2020_twx_edc.bin.ihex
@@ -0,0 +1,100 @@
+:10000000D8004009D8012FFFD802300FD80340AAEA
+:10001000D804401CD805401ED8062FF4D8073DC48C
+:10002000D8082035D8093035D80A6524D80B2CB229
+:10003000D80C3012D80D1002D80E26E2D80F30227C
+:10004000D8101002D81127D2D8123022D81310029B
+:10005000D8142822D8153012D8161002D817249296
+:10006000D8183022D8191002D81A2772D81B30128B
+:10007000D81C1002D81D23D2D81E3022D81F10023F
+:10008000D82022CDD821301DD82227F2D8233022E3
+:10009000D8241002D8255553D8260307D82725225F
+:1000A000D8283022D8291002D82A2142D82B301241
+:1000B000D82C1002D82D4016D82E5E63D82F0344BA
+:1000C000D8302142D8313012D8321002D833400E05
+:1000D000D8342522D8353022D8361002D8372B52C2
+:1000E000D8383012D8391002D83A2742D83B3022BB
+:1000F000D83C1002D83D25E2D83E3022D83F10022D
+:10010000D8402FA4D8413DC4D8426624D843414B9F
+:10011000D84456B3D84503C6D846866BD847400C5A
+:10012000D8482712D8493012D84A1002D84B2C4B45
+:10013000D84C309BD84D56B3D84E03C3D84F866B9E
+:10014000D850400CD8512272D8523022D8531002C5
+:10015000D8542742D8553022D8561002D85725E215
+:10016000D8583022D8591002D85A2FB4D85B3DC481
+:10017000D85C6624D85D56B3D85E03C3D85F866B5F
+:10018000D860401CD8612C45D8623095D8635B5349
+:10019000D8642372D8653012D86613C2D8675CC39E
+:1001A000D8682712D8693012D86A1312D86B2B522C
+:1001B000D86C3012D86D1002D86E2742D86F30221A
+:1001C000D8701002D8712582D8723022D8731002EC
+:1001D000D8742142D8753012D8761002D877628F41
+:1001E000D8782985D87933A5D87A25E2D87B3022EA
+:1001F000D87C1002D87D5653D87E03D2D87F401EBB
+:10020000D8806F72D8811002D882628FD88323047D
+:10021000D8843C84D8856436D886DFF4D8876436A1
+:10022000D8882FF5D8893005D88A8656D88BDFBA7A
+:10023000D88C56A3D88DD05AD88E2972D88F301228
+:10024000D8901392D891D05AD89256A3D893DFBAA7
+:10025000D8940383D8956F72D8961002D8972B45FF
+:10026000D8983005D8994178D89A5653D89B0384AA
+:10027000D89C2A62D89D3012D89E1002D89F2F0594
+:10028000D8A03005D8A141C8D8A25653D8A303821C
+:10029000D8A40002D8A54218D8A62474D8A73C84B4
+:1002A000D8A86437D8A9DFF4D8AA6437D8AB2FF51B
+:1002B000D8AC3C05D8AD8757D8AEB888D8AF9787AB
+:1002C000D8B0DFF4D8B16724D8B2866AD8B36F72D9
+:1002D000D8B41002D8B52641D8B63021D8B710010D
+:1002E000D8B8C620D8B90000D8BAC621D8BB0000FB
+:1002F000D8BCC622D8BD00CED8BEC623D8BF007F8A
+:10030000D8C0C624D8C10032D8C2C625D8C3000080
+:10031000D8C4C627D8C50000D8C6C628D8C700008C
+:10032000D8C8C62CD8C90000D8CA0000D8CB2641EE
+:10033000D8CC3021D8CD1001D8CEC502D8CF53ACFF
+:10034000D8D0C503D8D12CD3D8D2C600D8D32A6EE2
+:10035000D8D4C601D8D52A2CD8D6C605D8D7555753
+:10036000D8D8C60CD8D95400D8DAC710D8DB0700C3
+:10037000D8DCC711D8DD0F06D8DEC718D8DF0700D4
+:10038000D8E0C719D8E10F06D8E2C720D8E3470064
+:10039000D8E4C721D8E50F06D8E6C728D8E7070074
+:1003A000D8E8C729D8E91207D8EAC801D8EB7F50A6
+:1003B000D8ECC802D8ED7760D8EEC803D8EF7FCE6E
+:1003C000D8F0C804D8F1520ED8F2C805D8F35C11A1
+:1003D000D8F4C806D8F53C51D8F6C807D8F740611C
+:1003E000D8F8C808D8F949C1D8FAC809D8FB3840A4
+:1003F000D8FCC80AD8FD0000D8FEC821D8FF0002EA
+:10040000D900C822D9010046D902C844D903182FFF
+:10041000D904C013D905F341D906C084D9070030E7
+:10042000D908C904D9091401D90ACB0CD90B000485
+:10043000D90CCB0ED90DA00AD90ECB0FD90FC0C045
+:10044000D910CB10D911C0C0D912CB11D91300A02B
+:10045000D914CB12D9150007D916C241D917A0005B
+:10046000D918C243D9197FE0D91AC604D91B000E86
+:10047000D91CC609D91D00F5D91EC611D91F000EF9
+:10048000D920C660D9219600D922C687D923000475
+:10049000D924C60AD92504F5D9260000D927264132
+:1004A000D9283021D9291001D92AC620D92B14E501
+:1004B000D92CC621D92DC53DD92EC622D92F3CBE57
+:1004C000D930C623D9314452D932C624D933C5C50F
+:1004D000D934C625D935E01ED936C627D93700000C
+:1004E000D938C628D9390000D93AC62CD93B0000E2
+:1004F000D93C0000D93D2B84D93E3C74D93F6435AA
+:10050000D940DFF4D9416435D9422806D9433006B1
+:10051000D9448565D9452B24D9463C24D94764362E
+:10052000D9481002D9492B24D94A3C24D94B6436E6
+:10053000D94C4045D94D8656D94E5663D94F030202
+:10054000D950401ED9511002D9522807D95331A78A
+:10055000D95420C4D9553C24D9566724D957100200
+:10056000D9582807D9593187D95A20C4D95B3C2496
+:10057000D95C6724D95D1002D95E24F4D95F3C644C
+:10058000D9606436D961DFF4D9626436D963100268
+:10059000D9642006D9653D76D966C161D9676134D1
+:1005A000D9686135D9695443D96A0303D96B652485
+:1005B000D96C00FBD96D1002D96E20D4D96F3C24C0
+:1005C000D9702025D9713005D9726524D9731002EC
+:1005D000D974D019D9752104D9763C24D97721054D
+:1005E000D9783805D9796524D97ADFF4D97B4005E3
+:1005F000D97C6524D97D2E8DD97E303DD97F2408C4
+:10060000D98035D8D9815DD3D9820307D98388872A
+:10061000D98463A7D9858887D98663A7D987DFFD61
+:10062000D98800F9D9891002D98A0000878C30D97D
+:00000001FF
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 332b5ff0..f7003cf 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -76,7 +76,7 @@
* Return 0 upon success, -ERRNO upon failure.
*/
-static int v9fs_parse_options(struct v9fs_session_info *v9ses)
+static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts)
{
char *options;
substring_t args[MAX_OPT_ARGS];
@@ -90,10 +90,10 @@
v9ses->debug = 0;
v9ses->cache = 0;
- if (!v9ses->options)
+ if (!opts)
return 0;
- options = kstrdup(v9ses->options, GFP_KERNEL);
+ options = kstrdup(opts, GFP_KERNEL);
if (!options) {
P9_DPRINTK(P9_DEBUG_ERROR,
"failed to allocate copy of option string\n");
@@ -206,24 +206,14 @@
v9ses->uid = ~0;
v9ses->dfltuid = V9FS_DEFUID;
v9ses->dfltgid = V9FS_DEFGID;
- if (data) {
- v9ses->options = kstrdup(data, GFP_KERNEL);
- if (!v9ses->options) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy of option string\n");
- retval = -ENOMEM;
- goto error;
- }
- }
- rc = v9fs_parse_options(v9ses);
+ rc = v9fs_parse_options(v9ses, data);
if (rc < 0) {
retval = rc;
goto error;
}
- v9ses->clnt = p9_client_create(dev_name, v9ses->options);
-
+ v9ses->clnt = p9_client_create(dev_name, data);
if (IS_ERR(v9ses->clnt)) {
retval = PTR_ERR(v9ses->clnt);
v9ses->clnt = NULL;
@@ -280,7 +270,6 @@
__putname(v9ses->uname);
__putname(v9ses->aname);
- kfree(v9ses->options);
}
/**
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index a7d5671..38762bf 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -85,7 +85,6 @@
unsigned int afid;
unsigned int cache;
- char *options; /* copy of mount options */
char *uname; /* user name to mount as */
char *aname; /* name of remote hierarchy being mounted */
unsigned int maxdata; /* max data for client interface */
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 81f8bbf..06a223d 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -171,7 +171,6 @@
/**
* v9fs_blank_wstat - helper function to setup a 9P stat structure
- * @v9ses: 9P session info (for determining extended mode)
* @wstat: structure to initialize
*
*/
@@ -207,65 +206,72 @@
struct inode *v9fs_get_inode(struct super_block *sb, int mode)
{
+ int err;
struct inode *inode;
struct v9fs_session_info *v9ses = sb->s_fs_info;
P9_DPRINTK(P9_DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
inode = new_inode(sb);
- if (inode) {
- inode->i_mode = mode;
- inode->i_uid = current_fsuid();
- inode->i_gid = current_fsgid();
- inode->i_blocks = 0;
- inode->i_rdev = 0;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_mapping->a_ops = &v9fs_addr_operations;
-
- switch (mode & S_IFMT) {
- case S_IFIFO:
- case S_IFBLK:
- case S_IFCHR:
- case S_IFSOCK:
- if (!v9fs_extended(v9ses)) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "special files without extended mode\n");
- return ERR_PTR(-EINVAL);
- }
- init_special_inode(inode, inode->i_mode,
- inode->i_rdev);
- break;
- case S_IFREG:
- inode->i_op = &v9fs_file_inode_operations;
- inode->i_fop = &v9fs_file_operations;
- break;
- case S_IFLNK:
- if (!v9fs_extended(v9ses)) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "extended modes used w/o 9P2000.u\n");
- return ERR_PTR(-EINVAL);
- }
- inode->i_op = &v9fs_symlink_inode_operations;
- break;
- case S_IFDIR:
- inc_nlink(inode);
- if (v9fs_extended(v9ses))
- inode->i_op = &v9fs_dir_inode_operations_ext;
- else
- inode->i_op = &v9fs_dir_inode_operations;
- inode->i_fop = &v9fs_dir_operations;
- break;
- default:
- P9_DPRINTK(P9_DEBUG_ERROR,
- "BAD mode 0x%x S_IFMT 0x%x\n",
- mode, mode & S_IFMT);
- return ERR_PTR(-EINVAL);
- }
- } else {
+ if (!inode) {
P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n");
return ERR_PTR(-ENOMEM);
}
+
+ inode->i_mode = mode;
+ inode->i_uid = current_fsuid();
+ inode->i_gid = current_fsgid();
+ inode->i_blocks = 0;
+ inode->i_rdev = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ inode->i_mapping->a_ops = &v9fs_addr_operations;
+
+ switch (mode & S_IFMT) {
+ case S_IFIFO:
+ case S_IFBLK:
+ case S_IFCHR:
+ case S_IFSOCK:
+ if (!v9fs_extended(v9ses)) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "special files without extended mode\n");
+ err = -EINVAL;
+ goto error;
+ }
+ init_special_inode(inode, inode->i_mode, inode->i_rdev);
+ break;
+ case S_IFREG:
+ inode->i_op = &v9fs_file_inode_operations;
+ inode->i_fop = &v9fs_file_operations;
+ break;
+ case S_IFLNK:
+ if (!v9fs_extended(v9ses)) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "extended modes used w/o 9P2000.u\n");
+ err = -EINVAL;
+ goto error;
+ }
+ inode->i_op = &v9fs_symlink_inode_operations;
+ break;
+ case S_IFDIR:
+ inc_nlink(inode);
+ if (v9fs_extended(v9ses))
+ inode->i_op = &v9fs_dir_inode_operations_ext;
+ else
+ inode->i_op = &v9fs_dir_inode_operations;
+ inode->i_fop = &v9fs_dir_operations;
+ break;
+ default:
+ P9_DPRINTK(P9_DEBUG_ERROR, "BAD mode 0x%x S_IFMT 0x%x\n",
+ mode, mode & S_IFMT);
+ err = -EINVAL;
+ goto error;
+ }
+
return inode;
+
+error:
+ iput(inode);
+ return ERR_PTR(err);
}
/*
@@ -338,30 +344,25 @@
ret = NULL;
st = p9_client_stat(fid);
- if (IS_ERR(st)) {
- err = PTR_ERR(st);
- st = NULL;
- goto error;
- }
+ if (IS_ERR(st))
+ return ERR_CAST(st);
umode = p9mode2unixmode(v9ses, st->mode);
ret = v9fs_get_inode(sb, umode);
if (IS_ERR(ret)) {
err = PTR_ERR(ret);
- ret = NULL;
goto error;
}
v9fs_stat2inode(st, ret, sb);
ret->i_ino = v9fs_qid2ino(&st->qid);
+ p9stat_free(st);
kfree(st);
return ret;
error:
+ p9stat_free(st);
kfree(st);
- if (ret)
- iput(ret);
-
return ERR_PTR(err);
}
@@ -403,9 +404,9 @@
* @v9ses: session information
* @dir: directory that dentry is being created in
* @dentry: dentry that is being created
+ * @extension: 9p2000.u extension string to support devices, etc.
* @perm: create permissions
* @mode: open mode
- * @extension: 9p2000.u extension string to support devices, etc.
*
*/
static struct p9_fid *
@@ -470,7 +471,10 @@
dentry->d_op = &v9fs_dentry_operations;
d_instantiate(dentry, inode);
- v9fs_fid_add(dentry, fid);
+ err = v9fs_fid_add(dentry, fid);
+ if (err < 0)
+ goto error;
+
return ofid;
error:
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 38d695d..8961f1a 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -81,7 +81,7 @@
static void
v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses,
- int flags)
+ int flags, void *data)
{
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_blocksize_bits = fls(v9ses->maxdata - 1);
@@ -91,6 +91,8 @@
sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC |
MS_NOATIME;
+
+ save_mount_options(sb, data);
}
/**
@@ -113,14 +115,11 @@
struct v9fs_session_info *v9ses = NULL;
struct p9_wstat *st = NULL;
int mode = S_IRWXUGO | S_ISVTX;
- uid_t uid = current_fsuid();
- gid_t gid = current_fsgid();
struct p9_fid *fid;
int retval = 0;
P9_DPRINTK(P9_DEBUG_VFS, " \n");
- st = NULL;
v9ses = kzalloc(sizeof(struct v9fs_session_info), GFP_KERNEL);
if (!v9ses)
return -ENOMEM;
@@ -142,7 +141,7 @@
retval = PTR_ERR(sb);
goto free_stat;
}
- v9fs_fill_super(sb, v9ses, flags);
+ v9fs_fill_super(sb, v9ses, flags, data);
inode = v9fs_get_inode(sb, S_IFDIR | mode);
if (IS_ERR(inode)) {
@@ -150,9 +149,6 @@
goto release_sb;
}
- inode->i_uid = uid;
- inode->i_gid = gid;
-
root = d_alloc_root(inode);
if (!root) {
iput(inode);
@@ -173,10 +169,8 @@
simple_set_mnt(mnt, sb);
return 0;
-release_sb:
- deactivate_locked_super(sb);
-
free_stat:
+ p9stat_free(st);
kfree(st);
clunk_fid:
@@ -185,7 +179,12 @@
close_session:
v9fs_session_close(v9ses);
kfree(v9ses);
+ return retval;
+release_sb:
+ p9stat_free(st);
+ kfree(st);
+ deactivate_locked_super(sb);
return retval;
}
@@ -207,24 +206,10 @@
v9fs_session_close(v9ses);
kfree(v9ses);
+ s->s_fs_info = NULL;
P9_DPRINTK(P9_DEBUG_VFS, "exiting kill_super\n");
}
-/**
- * v9fs_show_options - Show mount options in /proc/mounts
- * @m: seq_file to write to
- * @mnt: mount descriptor
- *
- */
-
-static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
-{
- struct v9fs_session_info *v9ses = mnt->mnt_sb->s_fs_info;
-
- seq_printf(m, "%s", v9ses->options);
- return 0;
-}
-
static void
v9fs_umount_begin(struct super_block *sb)
{
@@ -237,7 +222,7 @@
static const struct super_operations v9fs_super_ops = {
.statfs = simple_statfs,
.clear_inode = v9fs_clear_inode,
- .show_options = v9fs_show_options,
+ .show_options = generic_show_options,
.umount_begin = v9fs_umount_begin,
};
diff --git a/fs/Kconfig b/fs/Kconfig
index 0e7da7b..455aa20 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -43,6 +43,7 @@
source "fs/gfs2/Kconfig"
source "fs/ocfs2/Kconfig"
source "fs/btrfs/Kconfig"
+source "fs/nilfs2/Kconfig"
endif # BLOCK
@@ -186,7 +187,6 @@
source "fs/sysv/Kconfig"
source "fs/ufs/Kconfig"
source "fs/exofs/Kconfig"
-source "fs/nilfs2/Kconfig"
endif # MISC_FILESYSTEMS
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 0149dab..681c2a7 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -134,9 +134,16 @@
inode = page->mapping->host;
- ASSERT(file != NULL);
- key = file->private_data;
- ASSERT(key != NULL);
+ if (file) {
+ key = file->private_data;
+ ASSERT(key != NULL);
+ } else {
+ key = afs_request_key(AFS_FS_S(inode->i_sb)->volume->cell);
+ if (IS_ERR(key)) {
+ ret = PTR_ERR(key);
+ goto error_nokey;
+ }
+ }
_enter("{%x},{%lu},{%lu}", key_serial(key), inode->i_ino, page->index);
@@ -207,12 +214,17 @@
unlock_page(page);
}
+ if (!file)
+ key_put(key);
_leave(" = 0");
return 0;
error:
SetPageError(page);
unlock_page(page);
+ if (!file)
+ key_put(key);
+error_nokey:
_leave(" = %d", ret);
return ret;
}
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index aa39ae8..3da18d4 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -77,7 +77,7 @@
}
/* Update the expiry counter if fs is busy */
- if (!may_umount_tree(mnt)) {
+ if (!may_umount_tree(path.mnt)) {
struct autofs_info *ino = autofs4_dentry_ino(top);
ino->last_used = jiffies;
goto done;
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index b7c1603..7c1e65d 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -501,22 +501,22 @@
}
}
- /*
- * Now fill out the bss section. First pad the last page up
- * to the page boundary, and then perform a mmap to make sure
- * that there are zero-mapped pages up to and including the
- * last bss page.
- */
- if (padzero(elf_bss)) {
- error = -EFAULT;
- goto out_close;
- }
-
- /* What we have mapped so far */
- elf_bss = ELF_PAGESTART(elf_bss + ELF_MIN_ALIGN - 1);
-
- /* Map the last of the bss segment */
if (last_bss > elf_bss) {
+ /*
+ * Now fill out the bss section. First pad the last page up
+ * to the page boundary, and then perform a mmap to make sure
+ * that there are zero-mapped pages up to and including the
+ * last bss page.
+ */
+ if (padzero(elf_bss)) {
+ error = -EFAULT;
+ goto out_close;
+ }
+
+ /* What we have mapped so far */
+ elf_bss = ELF_PAGESTART(elf_bss + ELF_MIN_ALIGN - 1);
+
+ /* Map the last of the bss segment */
down_write(¤t->mm->mmap_sem);
error = do_brk(elf_bss, last_bss - elf_bss);
up_write(¤t->mm->mmap_sem);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 94dfda2..3581a4e 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1405,6 +1405,33 @@
}
/*
+ * Write data to the block device. Only intended for the block device itself
+ * and the raw driver which basically is a fake block device.
+ *
+ * Does not take i_mutex for the write and thus is not for general purpose
+ * use.
+ */
+ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
+{
+ struct file *file = iocb->ki_filp;
+ ssize_t ret;
+
+ BUG_ON(iocb->ki_pos != pos);
+
+ ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
+ if (ret > 0 || ret == -EIOCBQUEUED) {
+ ssize_t err;
+
+ err = generic_write_sync(file, pos, ret);
+ if (err < 0 && ret > 0)
+ ret = err;
+ }
+ return ret;
+}
+EXPORT_SYMBOL_GPL(blkdev_aio_write);
+
+/*
* Try to release a page associated with block device when the system
* is under memory pressure.
*/
@@ -1436,7 +1463,7 @@
.read = do_sync_read,
.write = do_sync_write,
.aio_read = generic_file_aio_read,
- .aio_write = generic_file_aio_write_nolock,
+ .aio_write = blkdev_aio_write,
.mmap = generic_file_mmap,
.fsync = block_fsync,
.unlocked_ioctl = block_ioctl,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index e83be2e..15831d5 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1352,6 +1352,7 @@
{
int err;
+ bdi->name = "btrfs";
bdi->capabilities = BDI_CAP_MAP_COPY;
err = bdi_init(bdi);
if (err)
diff --git a/fs/buffer.c b/fs/buffer.c
index 28f320f..90a9886 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -281,7 +281,7 @@
struct zone *zone;
int nid;
- wakeup_pdflush(1024);
+ wakeup_flusher_threads(1024);
yield();
for_each_online_node(nid) {
diff --git a/fs/char_dev.c b/fs/char_dev.c
index a173551..3cbc57f 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -31,6 +31,7 @@
* - no readahead or I/O queue unplugging required
*/
struct backing_dev_info directly_mappable_cdev_bdi = {
+ .name = "char",
.capabilities = (
#ifdef CONFIG_MMU
/* permit private copies of the data to be taken */
@@ -237,8 +238,10 @@
}
/**
- * register_chrdev() - Register a major number for character devices.
+ * __register_chrdev() - create and register a cdev occupying a range of minors
* @major: major device number or 0 for dynamic allocation
+ * @baseminor: first of the requested range of minor numbers
+ * @count: the number of minor numbers required
* @name: name of this range of devices
* @fops: file operations associated with this devices
*
@@ -254,19 +257,17 @@
* /dev. It only helps to keep track of the different owners of devices. If
* your module name has only one type of devices it's ok to use e.g. the name
* of the module here.
- *
- * This function registers a range of 256 minor numbers. The first minor number
- * is 0.
*/
-int register_chrdev(unsigned int major, const char *name,
- const struct file_operations *fops)
+int __register_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name,
+ const struct file_operations *fops)
{
struct char_device_struct *cd;
struct cdev *cdev;
char *s;
int err = -ENOMEM;
- cd = __register_chrdev_region(major, 0, 256, name);
+ cd = __register_chrdev_region(major, baseminor, count, name);
if (IS_ERR(cd))
return PTR_ERR(cd);
@@ -280,7 +281,7 @@
for (s = strchr(kobject_name(&cdev->kobj),'/'); s; s = strchr(s, '/'))
*s = '!';
- err = cdev_add(cdev, MKDEV(cd->major, 0), 256);
+ err = cdev_add(cdev, MKDEV(cd->major, baseminor), count);
if (err)
goto out;
@@ -290,7 +291,7 @@
out:
kobject_put(&cdev->kobj);
out2:
- kfree(__unregister_chrdev_region(cd->major, 0, 256));
+ kfree(__unregister_chrdev_region(cd->major, baseminor, count));
return err;
}
@@ -316,10 +317,23 @@
}
}
-void unregister_chrdev(unsigned int major, const char *name)
+/**
+ * __unregister_chrdev - unregister and destroy a cdev
+ * @major: major device number
+ * @baseminor: first of the range of minor numbers
+ * @count: the number of minor numbers this cdev is occupying
+ * @name: name of this range of devices
+ *
+ * Unregister and destroy the cdev occupying the region described by
+ * @major, @baseminor and @count. This function undoes what
+ * __register_chrdev() did.
+ */
+void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name)
{
struct char_device_struct *cd;
- cd = __unregister_chrdev_region(major, 0, 256);
+
+ cd = __unregister_chrdev_region(major, baseminor, count);
if (cd && cd->cdev)
cdev_del(cd->cdev);
kfree(cd);
@@ -568,6 +582,6 @@
EXPORT_SYMBOL(cdev_del);
EXPORT_SYMBOL(cdev_add);
EXPORT_SYMBOL(cdev_index);
-EXPORT_SYMBOL(register_chrdev);
-EXPORT_SYMBOL(unregister_chrdev);
+EXPORT_SYMBOL(__register_chrdev);
+EXPORT_SYMBOL(__unregister_chrdev);
EXPORT_SYMBOL(directly_mappable_cdev_bdi);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index e85b1e4..145540a 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -3,7 +3,10 @@
Fix memory leak in reconnect. Fix oops in DFS mount error path.
Set s_maxbytes to smaller (the max that vfs can handle) so that
sendfile will now work over cifs mounts again. Add noforcegid
-and noforceuid mount parameters.
+and noforceuid mount parameters. Fix small mem leak when using
+ntlmv2. Fix 2nd mount to same server but with different port to
+be allowed (rather than reusing the 1st port) - only when the
+user explicitly overrides the port on the 2nd mount.
Version 1.59
------------
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 051caec..8ec7736 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -125,7 +125,7 @@
if (server->addr.sockAddr.sin_family == AF_INET)
sprintf(dp, "ip4=%pI4", &server->addr.sockAddr.sin_addr);
else if (server->addr.sockAddr.sin_family == AF_INET6)
- sprintf(dp, "ip6=%pi6", &server->addr.sockAddr6.sin6_addr);
+ sprintf(dp, "ip6=%pI6", &server->addr.sockAddr6.sin6_addr);
else
goto out;
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 6941c22..7dfe084 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -607,7 +607,7 @@
return get_cifs_acl_by_path(cifs_sb, path, pacllen);
pntsd = get_cifs_acl_by_fid(cifs_sb, open_file->netfid, pacllen);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
return pntsd;
}
@@ -665,7 +665,7 @@
return set_cifs_acl_by_path(cifs_sb, path, pnntsd, acllen);
rc = set_cifs_acl_by_fid(cifs_sb, open_file->netfid, pnntsd, acllen);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
return rc;
}
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 7c98095..7efe174 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -373,6 +373,7 @@
compare with the NTLM example */
hmac_md5_final(ses->server->ntlmv2_hash, pctxt);
+ kfree(pctxt);
return rc;
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 84b7525..3610e99 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -361,13 +361,10 @@
static int
cifs_show_options(struct seq_file *s, struct vfsmount *m)
{
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *tcon;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(m->mnt_sb);
+ struct cifsTconInfo *tcon = cifs_sb->tcon;
- cifs_sb = CIFS_SB(m->mnt_sb);
- tcon = cifs_sb->tcon;
-
- seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
+ seq_printf(s, ",unc=%s", tcon->treeName);
if (tcon->ses->userName)
seq_printf(s, ",username=%s", tcon->ses->userName);
if (tcon->ses->domainName)
@@ -989,19 +986,19 @@
if (try_to_freeze())
continue;
- spin_lock(&GlobalMid_Lock);
- if (list_empty(&GlobalOplock_Q)) {
- spin_unlock(&GlobalMid_Lock);
+ spin_lock(&cifs_oplock_lock);
+ if (list_empty(&cifs_oplock_list)) {
+ spin_unlock(&cifs_oplock_lock);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(39*HZ);
} else {
- oplock_item = list_entry(GlobalOplock_Q.next,
+ oplock_item = list_entry(cifs_oplock_list.next,
struct oplock_q_entry, qhead);
cFYI(1, ("found oplock item to write out"));
pTcon = oplock_item->tcon;
inode = oplock_item->pinode;
netfid = oplock_item->netfid;
- spin_unlock(&GlobalMid_Lock);
+ spin_unlock(&cifs_oplock_lock);
DeleteOplockQEntry(oplock_item);
/* can not grab inode sem here since it would
deadlock when oplock received on delete
@@ -1058,7 +1055,7 @@
int rc = 0;
cifs_proc_init();
INIT_LIST_HEAD(&cifs_tcp_ses_list);
- INIT_LIST_HEAD(&GlobalOplock_Q);
+ INIT_LIST_HEAD(&cifs_oplock_list);
#ifdef CONFIG_CIFS_EXPERIMENTAL
INIT_LIST_HEAD(&GlobalDnotifyReqList);
INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
@@ -1087,6 +1084,7 @@
rwlock_init(&GlobalSMBSeslock);
rwlock_init(&cifs_tcp_ses_lock);
spin_lock_init(&GlobalMid_Lock);
+ spin_lock_init(&cifs_oplock_lock);
if (cifs_max_pending < 2) {
cifs_max_pending = 2;
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 6c17094..094325e 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -113,5 +113,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.60"
+#define CIFS_VERSION "1.61"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 6084d63..6cfc81a 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -351,11 +351,24 @@
bool closePend:1; /* file is marked to close */
bool invalidHandle:1; /* file closed via session abend */
bool messageMode:1; /* for pipes: message vs byte mode */
- atomic_t wrtPending; /* handle in use - defer close */
+ atomic_t count; /* reference count */
struct mutex fh_mutex; /* prevents reopen race after dead ses*/
struct cifs_search_info srch_inf;
};
+/* Take a reference on the file private data */
+static inline void cifsFileInfo_get(struct cifsFileInfo *cifs_file)
+{
+ atomic_inc(&cifs_file->count);
+}
+
+/* Release a reference on the file private data */
+static inline void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
+{
+ if (atomic_dec_and_test(&cifs_file->count))
+ kfree(cifs_file);
+}
+
/*
* One of these for each file inode
*/
@@ -656,7 +669,11 @@
*/
GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;
-GLOBAL_EXTERN struct list_head GlobalOplock_Q;
+/* Global list of oplocks */
+GLOBAL_EXTERN struct list_head cifs_oplock_list;
+
+/* Protects the cifs_oplock_list */
+GLOBAL_EXTERN spinlock_t cifs_oplock_lock;
/* Outstanding dir notify requests */
GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 1866bc2..301e307 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -100,6 +100,128 @@
to this tcon */
}
+/* reconnect the socket, tcon, and smb session if needed */
+static int
+cifs_reconnect_tcon(struct cifsTconInfo *tcon, int smb_command)
+{
+ int rc = 0;
+ struct cifsSesInfo *ses;
+ struct TCP_Server_Info *server;
+ struct nls_table *nls_codepage;
+
+ /*
+ * SMBs NegProt, SessSetup, uLogoff do not have tcon yet so check for
+ * tcp and smb session status done differently for those three - in the
+ * calling routine
+ */
+ if (!tcon)
+ return 0;
+
+ ses = tcon->ses;
+ server = ses->server;
+
+ /*
+ * only tree disconnect, open, and write, (and ulogoff which does not
+ * have tcon) are allowed as we start force umount
+ */
+ if (tcon->tidStatus == CifsExiting) {
+ if (smb_command != SMB_COM_WRITE_ANDX &&
+ smb_command != SMB_COM_OPEN_ANDX &&
+ smb_command != SMB_COM_TREE_DISCONNECT) {
+ cFYI(1, ("can not send cmd %d while umounting",
+ smb_command));
+ return -ENODEV;
+ }
+ }
+
+ if (ses->status == CifsExiting)
+ return -EIO;
+
+ /*
+ * Give demultiplex thread up to 10 seconds to reconnect, should be
+ * greater than cifs socket timeout which is 7 seconds
+ */
+ while (server->tcpStatus == CifsNeedReconnect) {
+ wait_event_interruptible_timeout(server->response_q,
+ (server->tcpStatus == CifsGood), 10 * HZ);
+
+ /* is TCP session is reestablished now ?*/
+ if (server->tcpStatus != CifsNeedReconnect)
+ break;
+
+ /*
+ * on "soft" mounts we wait once. Hard mounts keep
+ * retrying until process is killed or server comes
+ * back on-line
+ */
+ if (!tcon->retry || ses->status == CifsExiting) {
+ cFYI(1, ("gave up waiting on reconnect in smb_init"));
+ return -EHOSTDOWN;
+ }
+ }
+
+ if (!ses->need_reconnect && !tcon->need_reconnect)
+ return 0;
+
+ nls_codepage = load_nls_default();
+
+ /*
+ * need to prevent multiple threads trying to simultaneously
+ * reconnect the same SMB session
+ */
+ down(&ses->sesSem);
+ if (ses->need_reconnect)
+ rc = cifs_setup_session(0, ses, nls_codepage);
+
+ /* do we need to reconnect tcon? */
+ if (rc || !tcon->need_reconnect) {
+ up(&ses->sesSem);
+ goto out;
+ }
+
+ mark_open_files_invalid(tcon);
+ rc = CIFSTCon(0, ses, tcon->treeName, tcon, nls_codepage);
+ up(&ses->sesSem);
+ cFYI(1, ("reconnect tcon rc = %d", rc));
+
+ if (rc)
+ goto out;
+
+ /*
+ * FIXME: check if wsize needs updated due to negotiated smb buffer
+ * size shrinking
+ */
+ atomic_inc(&tconInfoReconnectCount);
+
+ /* tell server Unix caps we support */
+ if (ses->capabilities & CAP_UNIX)
+ reset_cifs_unix_caps(0, tcon, NULL, NULL);
+
+ /*
+ * Removed call to reopen open files here. It is safer (and faster) to
+ * reopen files one at a time as needed in read and write.
+ *
+ * FIXME: what about file locks? don't we need to reclaim them ASAP?
+ */
+
+out:
+ /*
+ * Check if handle based operation so we know whether we can continue
+ * or not without returning to caller to reset file handle
+ */
+ switch (smb_command) {
+ case SMB_COM_READ_ANDX:
+ case SMB_COM_WRITE_ANDX:
+ case SMB_COM_CLOSE:
+ case SMB_COM_FIND_CLOSE2:
+ case SMB_COM_LOCKING_ANDX:
+ rc = -EAGAIN;
+ }
+
+ unload_nls(nls_codepage);
+ return rc;
+}
+
/* Allocate and return pointer to an SMB request buffer, and set basic
SMB information in the SMB header. If the return code is zero, this
function must have filled in request_buf pointer */
@@ -109,101 +231,7 @@
{
int rc = 0;
- /* SMBs NegProt, SessSetup, uLogoff do not have tcon yet so
- check for tcp and smb session status done differently
- for those three - in the calling routine */
- if (tcon) {
- if (tcon->tidStatus == CifsExiting) {
- /* only tree disconnect, open, and write,
- (and ulogoff which does not have tcon)
- are allowed as we start force umount */
- if ((smb_command != SMB_COM_WRITE_ANDX) &&
- (smb_command != SMB_COM_OPEN_ANDX) &&
- (smb_command != SMB_COM_TREE_DISCONNECT)) {
- cFYI(1, ("can not send cmd %d while umounting",
- smb_command));
- return -ENODEV;
- }
- }
- if ((tcon->ses) && (tcon->ses->status != CifsExiting) &&
- (tcon->ses->server)) {
- struct nls_table *nls_codepage;
- /* Give Demultiplex thread up to 10 seconds to
- reconnect, should be greater than cifs socket
- timeout which is 7 seconds */
- while (tcon->ses->server->tcpStatus ==
- CifsNeedReconnect) {
- wait_event_interruptible_timeout(tcon->ses->server->response_q,
- (tcon->ses->server->tcpStatus ==
- CifsGood), 10 * HZ);
- if (tcon->ses->server->tcpStatus ==
- CifsNeedReconnect) {
- /* on "soft" mounts we wait once */
- if (!tcon->retry ||
- (tcon->ses->status == CifsExiting)) {
- cFYI(1, ("gave up waiting on "
- "reconnect in smb_init"));
- return -EHOSTDOWN;
- } /* else "hard" mount - keep retrying
- until process is killed or server
- comes back on-line */
- } else /* TCP session is reestablished now */
- break;
- }
-
- nls_codepage = load_nls_default();
- /* need to prevent multiple threads trying to
- simultaneously reconnect the same SMB session */
- down(&tcon->ses->sesSem);
- if (tcon->ses->need_reconnect)
- rc = cifs_setup_session(0, tcon->ses,
- nls_codepage);
- if (!rc && (tcon->need_reconnect)) {
- mark_open_files_invalid(tcon);
- rc = CIFSTCon(0, tcon->ses, tcon->treeName,
- tcon, nls_codepage);
- up(&tcon->ses->sesSem);
- /* BB FIXME add code to check if wsize needs
- update due to negotiated smb buffer size
- shrinking */
- if (rc == 0) {
- atomic_inc(&tconInfoReconnectCount);
- /* tell server Unix caps we support */
- if (tcon->ses->capabilities & CAP_UNIX)
- reset_cifs_unix_caps(
- 0 /* no xid */,
- tcon,
- NULL /* we do not know sb */,
- NULL /* no vol info */);
- }
-
- cFYI(1, ("reconnect tcon rc = %d", rc));
- /* Removed call to reopen open files here.
- It is safer (and faster) to reopen files
- one at a time as needed in read and write */
-
- /* Check if handle based operation so we
- know whether we can continue or not without
- returning to caller to reset file handle */
- switch (smb_command) {
- case SMB_COM_READ_ANDX:
- case SMB_COM_WRITE_ANDX:
- case SMB_COM_CLOSE:
- case SMB_COM_FIND_CLOSE2:
- case SMB_COM_LOCKING_ANDX: {
- unload_nls(nls_codepage);
- return -EAGAIN;
- }
- }
- } else {
- up(&tcon->ses->sesSem);
- }
- unload_nls(nls_codepage);
-
- } else {
- return -EIO;
- }
- }
+ rc = cifs_reconnect_tcon(tcon, smb_command);
if (rc)
return rc;
@@ -256,101 +284,7 @@
{
int rc = 0;
- /* SMBs NegProt, SessSetup, uLogoff do not have tcon yet so
- check for tcp and smb session status done differently
- for those three - in the calling routine */
- if (tcon) {
- if (tcon->tidStatus == CifsExiting) {
- /* only tree disconnect, open, and write,
- (and ulogoff which does not have tcon)
- are allowed as we start force umount */
- if ((smb_command != SMB_COM_WRITE_ANDX) &&
- (smb_command != SMB_COM_OPEN_ANDX) &&
- (smb_command != SMB_COM_TREE_DISCONNECT)) {
- cFYI(1, ("can not send cmd %d while umounting",
- smb_command));
- return -ENODEV;
- }
- }
-
- if ((tcon->ses) && (tcon->ses->status != CifsExiting) &&
- (tcon->ses->server)) {
- struct nls_table *nls_codepage;
- /* Give Demultiplex thread up to 10 seconds to
- reconnect, should be greater than cifs socket
- timeout which is 7 seconds */
- while (tcon->ses->server->tcpStatus ==
- CifsNeedReconnect) {
- wait_event_interruptible_timeout(tcon->ses->server->response_q,
- (tcon->ses->server->tcpStatus ==
- CifsGood), 10 * HZ);
- if (tcon->ses->server->tcpStatus ==
- CifsNeedReconnect) {
- /* on "soft" mounts we wait once */
- if (!tcon->retry ||
- (tcon->ses->status == CifsExiting)) {
- cFYI(1, ("gave up waiting on "
- "reconnect in smb_init"));
- return -EHOSTDOWN;
- } /* else "hard" mount - keep retrying
- until process is killed or server
- comes on-line */
- } else /* TCP session is reestablished now */
- break;
- }
- nls_codepage = load_nls_default();
- /* need to prevent multiple threads trying to
- simultaneously reconnect the same SMB session */
- down(&tcon->ses->sesSem);
- if (tcon->ses->need_reconnect)
- rc = cifs_setup_session(0, tcon->ses,
- nls_codepage);
- if (!rc && (tcon->need_reconnect)) {
- mark_open_files_invalid(tcon);
- rc = CIFSTCon(0, tcon->ses, tcon->treeName,
- tcon, nls_codepage);
- up(&tcon->ses->sesSem);
- /* BB FIXME add code to check if wsize needs
- update due to negotiated smb buffer size
- shrinking */
- if (rc == 0) {
- atomic_inc(&tconInfoReconnectCount);
- /* tell server Unix caps we support */
- if (tcon->ses->capabilities & CAP_UNIX)
- reset_cifs_unix_caps(
- 0 /* no xid */,
- tcon,
- NULL /* do not know sb */,
- NULL /* no vol info */);
- }
-
- cFYI(1, ("reconnect tcon rc = %d", rc));
- /* Removed call to reopen open files here.
- It is safer (and faster) to reopen files
- one at a time as needed in read and write */
-
- /* Check if handle based operation so we
- know whether we can continue or not without
- returning to caller to reset file handle */
- switch (smb_command) {
- case SMB_COM_READ_ANDX:
- case SMB_COM_WRITE_ANDX:
- case SMB_COM_CLOSE:
- case SMB_COM_FIND_CLOSE2:
- case SMB_COM_LOCKING_ANDX: {
- unload_nls(nls_codepage);
- return -EAGAIN;
- }
- }
- } else {
- up(&tcon->ses->sesSem);
- }
- unload_nls(nls_codepage);
-
- } else {
- return -EIO;
- }
- }
+ rc = cifs_reconnect_tcon(tcon, smb_command);
if (rc)
return rc;
@@ -3961,6 +3895,10 @@
if (is_unicode) {
__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
GFP_KERNEL);
+ if (tmp == NULL) {
+ rc = -ENOMEM;
+ goto parse_DFS_referrals_exit;
+ }
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
node->path_consumed = cifs_ucs2_bytes(tmp,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 1f3345d..d496824 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1377,7 +1377,7 @@
}
static struct TCP_Server_Info *
-cifs_find_tcp_session(struct sockaddr_storage *addr)
+cifs_find_tcp_session(struct sockaddr_storage *addr, unsigned short int port)
{
struct list_head *tmp;
struct TCP_Server_Info *server;
@@ -1397,16 +1397,37 @@
if (server->tcpStatus == CifsNew)
continue;
- if (addr->ss_family == AF_INET &&
- (addr4->sin_addr.s_addr !=
- server->addr.sockAddr.sin_addr.s_addr))
- continue;
- else if (addr->ss_family == AF_INET6 &&
- (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
- &addr6->sin6_addr) ||
- server->addr.sockAddr6.sin6_scope_id !=
- addr6->sin6_scope_id))
- continue;
+ switch (addr->ss_family) {
+ case AF_INET:
+ if (addr4->sin_addr.s_addr ==
+ server->addr.sockAddr.sin_addr.s_addr) {
+ addr4->sin_port = htons(port);
+ /* user overrode default port? */
+ if (addr4->sin_port) {
+ if (addr4->sin_port !=
+ server->addr.sockAddr.sin_port)
+ continue;
+ }
+ break;
+ } else
+ continue;
+
+ case AF_INET6:
+ if (ipv6_addr_equal(&addr6->sin6_addr,
+ &server->addr.sockAddr6.sin6_addr) &&
+ (addr6->sin6_scope_id ==
+ server->addr.sockAddr6.sin6_scope_id)) {
+ addr6->sin6_port = htons(port);
+ /* user overrode default port? */
+ if (addr6->sin6_port) {
+ if (addr6->sin6_port !=
+ server->addr.sockAddr6.sin6_port)
+ continue;
+ }
+ break;
+ } else
+ continue;
+ }
++server->srv_count;
write_unlock(&cifs_tcp_ses_lock);
@@ -1475,7 +1496,7 @@
}
/* see if we already have a matching tcp_ses */
- tcp_ses = cifs_find_tcp_session(&addr);
+ tcp_ses = cifs_find_tcp_session(&addr, volume_info->port);
if (tcp_ses)
return tcp_ses;
@@ -2636,9 +2657,9 @@
return -EIO;
smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
+ if (smb_buffer == NULL)
return -ENOMEM;
- }
+
smb_buffer_response = smb_buffer;
header_assemble(smb_buffer, SMB_COM_TREE_CONNECT_ANDX,
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 4326ffd..a6424cf 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -153,7 +153,7 @@
mutex_init(&pCifsFile->fh_mutex);
mutex_init(&pCifsFile->lock_mutex);
INIT_LIST_HEAD(&pCifsFile->llist);
- atomic_set(&pCifsFile->wrtPending, 0);
+ atomic_set(&pCifsFile->count, 1);
/* set the following in open now
pCifsFile->pfile = file; */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index c34b7f8..fa7beac 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -53,11 +53,9 @@
private_data->pInode = inode;
private_data->invalidHandle = false;
private_data->closePend = false;
- /* we have to track num writers to the inode, since writepages
- does not tell us which handle the write is for so there can
- be a close (overlapping with write) of the filehandle that
- cifs_writepages chose to use */
- atomic_set(&private_data->wrtPending, 0);
+ /* Initialize reference count to one. The private data is
+ freed on the release of the last reference */
+ atomic_set(&private_data->count, 1);
return private_data;
}
@@ -643,7 +641,7 @@
if (!pTcon->need_reconnect) {
write_unlock(&GlobalSMBSeslock);
timeout = 2;
- while ((atomic_read(&pSMBFile->wrtPending) != 0)
+ while ((atomic_read(&pSMBFile->count) != 1)
&& (timeout <= 2048)) {
/* Give write a better chance to get to
server ahead of the close. We do not
@@ -657,8 +655,6 @@
msleep(timeout);
timeout *= 4;
}
- if (atomic_read(&pSMBFile->wrtPending))
- cERROR(1, ("close with pending write"));
if (!pTcon->need_reconnect &&
!pSMBFile->invalidHandle)
rc = CIFSSMBClose(xid, pTcon,
@@ -681,24 +677,7 @@
list_del(&pSMBFile->flist);
list_del(&pSMBFile->tlist);
write_unlock(&GlobalSMBSeslock);
- timeout = 10;
- /* We waited above to give the SMBWrite a chance to issue
- on the wire (so we do not get SMBWrite returning EBADF
- if writepages is racing with close. Note that writepages
- does not specify a file handle, so it is possible for a file
- to be opened twice, and the application close the "wrong"
- file handle - in these cases we delay long enough to allow
- the SMBWrite to get on the wire before the SMB Close.
- We allow total wait here over 45 seconds, more than
- oplock break time, and more than enough to allow any write
- to complete on the server, or to time out on the client */
- while ((atomic_read(&pSMBFile->wrtPending) != 0)
- && (timeout <= 50000)) {
- cERROR(1, ("writes pending, delay free of handle"));
- msleep(timeout);
- timeout *= 8;
- }
- kfree(file->private_data);
+ cifsFileInfo_put(file->private_data);
file->private_data = NULL;
} else
rc = -EBADF;
@@ -1236,7 +1215,7 @@
if (!open_file->invalidHandle) {
/* found a good file */
/* lock it so it will not be closed on us */
- atomic_inc(&open_file->wrtPending);
+ cifsFileInfo_get(open_file);
read_unlock(&GlobalSMBSeslock);
return open_file;
} /* else might as well continue, and look for
@@ -1276,7 +1255,7 @@
if (open_file->pfile &&
((open_file->pfile->f_flags & O_RDWR) ||
(open_file->pfile->f_flags & O_WRONLY))) {
- atomic_inc(&open_file->wrtPending);
+ cifsFileInfo_get(open_file);
if (!open_file->invalidHandle) {
/* found a good writable file */
@@ -1293,7 +1272,7 @@
else { /* start over in case this was deleted */
/* since the list could be modified */
read_lock(&GlobalSMBSeslock);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
goto refind_writable;
}
}
@@ -1309,7 +1288,7 @@
read_lock(&GlobalSMBSeslock);
/* can not use this handle, no write
pending on this one after all */
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
if (open_file->closePend) /* list could have changed */
goto refind_writable;
@@ -1373,7 +1352,7 @@
if (open_file) {
bytes_written = cifs_write(open_file->pfile, write_data,
to-from, &offset);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
/* Does mm or vfs already set times? */
inode->i_atime = inode->i_mtime = current_fs_time(inode->i_sb);
if ((bytes_written > 0) && (offset))
@@ -1562,7 +1541,7 @@
bytes_to_write, offset,
&bytes_written, iov, n_iov,
long_op);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
cifs_update_eof(cifsi, offset, bytes_written);
if (rc || bytes_written < bytes_to_write) {
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 82d8383..1f09c76 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -800,7 +800,7 @@
if (open_file == NULL)
CIFSSMBClose(xid, pTcon, netfid);
else
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
out:
return rc;
}
@@ -1635,7 +1635,7 @@
__u32 npid = open_file->pid;
rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size, nfid,
npid, false);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
cFYI(1, ("SetFSize for attrs rc = %d", rc));
if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
unsigned int bytes_written;
@@ -1790,7 +1790,7 @@
u16 nfid = open_file->netfid;
u32 npid = open_file->pid;
rc = CIFSSMBUnixSetFileInfo(xid, pTcon, args, nfid, npid);
- atomic_dec(&open_file->wrtPending);
+ cifsFileInfo_put(open_file);
} else {
rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, args,
cifs_sb->local_nls,
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 0ad3e2d..1da4ab2 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -119,20 +119,19 @@
temp->pinode = pinode;
temp->tcon = tcon;
temp->netfid = fid;
- spin_lock(&GlobalMid_Lock);
- list_add_tail(&temp->qhead, &GlobalOplock_Q);
- spin_unlock(&GlobalMid_Lock);
+ spin_lock(&cifs_oplock_lock);
+ list_add_tail(&temp->qhead, &cifs_oplock_list);
+ spin_unlock(&cifs_oplock_lock);
}
return temp;
-
}
void DeleteOplockQEntry(struct oplock_q_entry *oplockEntry)
{
- spin_lock(&GlobalMid_Lock);
+ spin_lock(&cifs_oplock_lock);
/* should we check if list empty first? */
list_del(&oplockEntry->qhead);
- spin_unlock(&GlobalMid_Lock);
+ spin_unlock(&cifs_oplock_lock);
kmem_cache_free(cifs_oplock_cachep, oplockEntry);
}
@@ -144,14 +143,14 @@
if (tcon == NULL)
return;
- spin_lock(&GlobalMid_Lock);
- list_for_each_entry(temp, &GlobalOplock_Q, qhead) {
+ spin_lock(&cifs_oplock_lock);
+ list_for_each_entry(temp, &cifs_oplock_list, qhead) {
if ((temp->tcon) && (temp->tcon == tcon)) {
list_del(&temp->qhead);
kmem_cache_free(cifs_oplock_cachep, temp);
}
}
- spin_unlock(&GlobalMid_Lock);
+ spin_unlock(&cifs_oplock_lock);
}
static int
diff --git a/fs/compat.c b/fs/compat.c
index 94502da..6d6f98f 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1485,20 +1485,15 @@
if (!bprm)
goto out_files;
- retval = -ERESTARTNOINTR;
- if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ retval = prepare_bprm_creds(bprm);
+ if (retval)
goto out_free;
- current->in_execve = 1;
-
- retval = -ENOMEM;
- bprm->cred = prepare_exec_creds();
- if (!bprm->cred)
- goto out_unlock;
retval = check_unsafe_exec(bprm);
if (retval < 0)
- goto out_unlock;
+ goto out_free;
clear_in_exec = retval;
+ current->in_execve = 1;
file = open_exec(filename);
retval = PTR_ERR(file);
@@ -1547,7 +1542,6 @@
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
acct_update_integrals(current);
free_bprm(bprm);
if (displaced)
@@ -1567,10 +1561,7 @@
out_unmark:
if (clear_in_exec)
current->fs->in_exec = 0;
-
-out_unlock:
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
out_free:
free_bprm(bprm);
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 4921e742..a2f7460 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -51,6 +51,7 @@
};
static struct backing_dev_info configfs_backing_dev_info = {
+ .name = "configfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/fs/dcache.c b/fs/dcache.c
index 9e5cd3c..a100fa3 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -32,6 +32,7 @@
#include <linux/swap.h>
#include <linux/bootmem.h>
#include <linux/fs_struct.h>
+#include <linux/hardirq.h>
#include "internal.h"
int sysctl_vfs_cache_pressure __read_mostly = 100;
diff --git a/fs/dlm/netlink.c b/fs/dlm/netlink.c
index ccc9d62..55ea369 100644
--- a/fs/dlm/netlink.c
+++ b/fs/dlm/netlink.c
@@ -63,7 +63,7 @@
return rv;
}
- return genlmsg_unicast(skb, listener_nlpid);
+ return genlmsg_unicast(&init_net, skb, listener_nlpid);
}
static int user_cmd(struct sk_buff *skb, struct genl_info *info)
diff --git a/fs/exec.c b/fs/exec.c
index 4a8849e..172ceb6 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -678,8 +678,8 @@
}
EXPORT_SYMBOL(open_exec);
-int kernel_read(struct file *file, unsigned long offset,
- char *addr, unsigned long count)
+int kernel_read(struct file *file, loff_t offset,
+ char *addr, unsigned long count)
{
mm_segment_t old_fs;
loff_t pos = offset;
@@ -1016,6 +1016,35 @@
EXPORT_SYMBOL(flush_old_exec);
/*
+ * Prepare credentials and lock ->cred_guard_mutex.
+ * install_exec_creds() commits the new creds and drops the lock.
+ * Or, if exec fails before, free_bprm() should release ->cred and
+ * and unlock.
+ */
+int prepare_bprm_creds(struct linux_binprm *bprm)
+{
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ return -ERESTARTNOINTR;
+
+ bprm->cred = prepare_exec_creds();
+ if (likely(bprm->cred))
+ return 0;
+
+ mutex_unlock(¤t->cred_guard_mutex);
+ return -ENOMEM;
+}
+
+void free_bprm(struct linux_binprm *bprm)
+{
+ free_arg_pages(bprm);
+ if (bprm->cred) {
+ mutex_unlock(¤t->cred_guard_mutex);
+ abort_creds(bprm->cred);
+ }
+ kfree(bprm);
+}
+
+/*
* install the new credentials for this executable
*/
void install_exec_creds(struct linux_binprm *bprm)
@@ -1024,12 +1053,13 @@
commit_creds(bprm->cred);
bprm->cred = NULL;
-
- /* cred_guard_mutex must be held at least to this point to prevent
+ /*
+ * cred_guard_mutex must be held at least to this point to prevent
* ptrace_attach() from altering our determination of the task's
- * credentials; any time after this it may be unlocked */
-
+ * credentials; any time after this it may be unlocked.
+ */
security_bprm_committed_creds(bprm);
+ mutex_unlock(¤t->cred_guard_mutex);
}
EXPORT_SYMBOL(install_exec_creds);
@@ -1246,14 +1276,6 @@
EXPORT_SYMBOL(search_binary_handler);
-void free_bprm(struct linux_binprm *bprm)
-{
- free_arg_pages(bprm);
- if (bprm->cred)
- abort_creds(bprm->cred);
- kfree(bprm);
-}
-
/*
* sys_execve() executes a new program.
*/
@@ -1277,20 +1299,15 @@
if (!bprm)
goto out_files;
- retval = -ERESTARTNOINTR;
- if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ retval = prepare_bprm_creds(bprm);
+ if (retval)
goto out_free;
- current->in_execve = 1;
-
- retval = -ENOMEM;
- bprm->cred = prepare_exec_creds();
- if (!bprm->cred)
- goto out_unlock;
retval = check_unsafe_exec(bprm);
if (retval < 0)
- goto out_unlock;
+ goto out_free;
clear_in_exec = retval;
+ current->in_execve = 1;
file = open_exec(filename);
retval = PTR_ERR(file);
@@ -1340,7 +1357,6 @@
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
acct_update_integrals(current);
free_bprm(bprm);
if (displaced)
@@ -1360,10 +1376,7 @@
out_unmark:
if (clear_in_exec)
current->fs->in_exec = 0;
-
-out_unlock:
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
out_free:
free_bprm(bprm);
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index d636e12..a63d442 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -230,7 +230,7 @@
return error;
}
-static int
+int
ext2_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = ext2_get_acl(inode, ACL_TYPE_ACCESS);
@@ -246,12 +246,6 @@
return -EAGAIN;
}
-int
-ext2_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, ext2_check_acl);
-}
-
/*
* Initialize the ACLs of a new inode. Called from ext2_new_inode.
*
diff --git a/fs/ext2/acl.h b/fs/ext2/acl.h
index ecefe47..3ff6cbb 100644
--- a/fs/ext2/acl.h
+++ b/fs/ext2/acl.h
@@ -54,13 +54,13 @@
#ifdef CONFIG_EXT2_FS_POSIX_ACL
/* acl.c */
-extern int ext2_permission (struct inode *, int);
+extern int ext2_check_acl (struct inode *, int);
extern int ext2_acl_chmod (struct inode *);
extern int ext2_init_acl (struct inode *, struct inode *);
#else
#include <linux/sched.h>
-#define ext2_permission NULL
+#define ext2_check_acl NULL
#define ext2_get_acl NULL
#define ext2_set_acl NULL
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 2b9e47d..a2f3afd 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -85,6 +85,6 @@
.removexattr = generic_removexattr,
#endif
.setattr = ext2_setattr,
- .permission = ext2_permission,
+ .check_acl = ext2_check_acl,
.fiemap = ext2_fiemap,
};
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index e271303..1c1638f 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -482,7 +482,7 @@
unlock_buffer(bh);
mark_buffer_dirty_inode(bh, inode);
/* We used to sync bh here if IS_SYNC(inode).
- * But we now rely upon generic_osync_inode()
+ * But we now rely upon generic_write_sync()
* and b_inode_buffers. But not for directories.
*/
if (S_ISDIR(inode->i_mode) && IS_DIRSYNC(inode))
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index e1dedb0..23701f2 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -362,6 +362,10 @@
if (dir_de) {
if (old_dir != new_dir)
ext2_set_link(old_inode, dir_de, dir_page, new_dir, 0);
+ else {
+ kunmap(dir_page);
+ page_cache_release(dir_page);
+ }
inode_dec_link_count(old_dir);
}
return 0;
@@ -396,7 +400,7 @@
.removexattr = generic_removexattr,
#endif
.setattr = ext2_setattr,
- .permission = ext2_permission,
+ .check_acl = ext2_check_acl,
};
const struct inode_operations ext2_special_inode_operations = {
@@ -407,5 +411,5 @@
.removexattr = generic_removexattr,
#endif
.setattr = ext2_setattr,
- .permission = ext2_permission,
+ .check_acl = ext2_check_acl,
};
diff --git a/fs/ext3/Kconfig b/fs/ext3/Kconfig
index fb3c1a2..522b154 100644
--- a/fs/ext3/Kconfig
+++ b/fs/ext3/Kconfig
@@ -29,23 +29,25 @@
module will be called ext3.
config EXT3_DEFAULTS_TO_ORDERED
- bool "Default to 'data=ordered' in ext3 (legacy option)"
+ bool "Default to 'data=ordered' in ext3"
depends on EXT3_FS
help
- If a filesystem does not explicitly specify a data ordering
- mode, and the journal capability allowed it, ext3 used to
- historically default to 'data=ordered'.
+ The journal mode options for ext3 have different tradeoffs
+ between when data is guaranteed to be on disk and
+ performance. The use of "data=writeback" can cause
+ unwritten data to appear in files after an system crash or
+ power failure, which can be a security issue. However,
+ "data=ordered" mode can also result in major performance
+ problems, including seconds-long delays before an fsync()
+ call returns. For details, see:
- That was a rather unfortunate choice, because it leads to all
- kinds of latency problems, and the 'data=writeback' mode is more
- appropriate these days.
+ http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs
- You should probably always answer 'n' here, and if you really
- want to use 'data=ordered' mode, set it in the filesystem itself
- with 'tune2fs -o journal_data_ordered'.
-
- But if you really want to enable the legacy default, you can do
- so by answering 'y' to this question.
+ If you have been historically happy with ext3's performance,
+ data=ordered mode will be a safe choice and you should
+ answer 'y' here. If you understand the reliability and data
+ privacy issues of data=writeback and are willing to make
+ that trade off, answer 'n'.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index e167bae..c9b0df3 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -238,7 +238,7 @@
return error;
}
-static int
+int
ext3_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = ext3_get_acl(inode, ACL_TYPE_ACCESS);
@@ -254,12 +254,6 @@
return -EAGAIN;
}
-int
-ext3_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, ext3_check_acl);
-}
-
/*
* Initialize the ACLs of a new inode. Called from ext3_new_inode.
*
diff --git a/fs/ext3/acl.h b/fs/ext3/acl.h
index 07d15a3..5973346 100644
--- a/fs/ext3/acl.h
+++ b/fs/ext3/acl.h
@@ -54,13 +54,13 @@
#ifdef CONFIG_EXT3_FS_POSIX_ACL
/* acl.c */
-extern int ext3_permission (struct inode *, int);
+extern int ext3_check_acl (struct inode *, int);
extern int ext3_acl_chmod (struct inode *);
extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
#else /* CONFIG_EXT3_FS_POSIX_ACL */
#include <linux/sched.h>
-#define ext3_permission NULL
+#define ext3_check_acl NULL
static inline int
ext3_acl_chmod(struct inode *inode)
diff --git a/fs/ext3/file.c b/fs/ext3/file.c
index 5b49704..388bbdf 100644
--- a/fs/ext3/file.c
+++ b/fs/ext3/file.c
@@ -51,71 +51,12 @@
return 0;
}
-static ssize_t
-ext3_file_write(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos)
-{
- struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_path.dentry->d_inode;
- ssize_t ret;
- int err;
-
- ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
-
- /*
- * Skip flushing if there was an error, or if nothing was written.
- */
- if (ret <= 0)
- return ret;
-
- /*
- * If the inode is IS_SYNC, or is O_SYNC and we are doing data
- * journalling then we need to make sure that we force the transaction
- * to disk to keep all metadata uptodate synchronously.
- */
- if (file->f_flags & O_SYNC) {
- /*
- * If we are non-data-journaled, then the dirty data has
- * already been flushed to backing store by generic_osync_inode,
- * and the inode has been flushed too if there have been any
- * modifications other than mere timestamp updates.
- *
- * Open question --- do we care about flushing timestamps too
- * if the inode is IS_SYNC?
- */
- if (!ext3_should_journal_data(inode))
- return ret;
-
- goto force_commit;
- }
-
- /*
- * So we know that there has been no forced data flush. If the inode
- * is marked IS_SYNC, we need to force one ourselves.
- */
- if (!IS_SYNC(inode))
- return ret;
-
- /*
- * Open question #2 --- should we force data to disk here too? If we
- * don't, the only impact is that data=writeback filesystems won't
- * flush data to disk automatically on IS_SYNC, only metadata (but
- * historically, that is what ext2 has done.)
- */
-
-force_commit:
- err = ext3_force_commit(inode->i_sb);
- if (err)
- return err;
- return ret;
-}
-
const struct file_operations ext3_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = generic_file_aio_read,
- .aio_write = ext3_file_write,
+ .aio_write = generic_file_aio_write,
.unlocked_ioctl = ext3_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ext3_compat_ioctl,
@@ -137,7 +78,7 @@
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext3_permission,
+ .check_acl = ext3_check_acl,
.fiemap = ext3_fiemap,
};
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 6ff7b97..aad6400 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -2445,7 +2445,7 @@
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext3_permission,
+ .check_acl = ext3_check_acl,
};
const struct inode_operations ext3_special_inode_operations = {
@@ -2456,5 +2456,5 @@
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext3_permission,
+ .check_acl = ext3_check_acl,
};
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 524b349..a8d80a7 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -543,6 +543,19 @@
#endif
}
+static char *data_mode_string(unsigned long mode)
+{
+ switch (mode) {
+ case EXT3_MOUNT_JOURNAL_DATA:
+ return "journal";
+ case EXT3_MOUNT_ORDERED_DATA:
+ return "ordered";
+ case EXT3_MOUNT_WRITEBACK_DATA:
+ return "writeback";
+ }
+ return "unknown";
+}
+
/*
* Show an option if
* - it's set to a non-default value OR
@@ -616,13 +629,8 @@
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
- if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
- seq_puts(seq, ",data=journal");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
- seq_puts(seq, ",data=ordered");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- seq_puts(seq, ",data=writeback");
-
+ seq_printf(seq, ",data=%s", data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS));
if (test_opt(sb, DATA_ERR_ABORT))
seq_puts(seq, ",data_err=abort");
@@ -1024,12 +1032,18 @@
datacheck:
if (is_remount) {
if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
- != data_opt) {
- printk(KERN_ERR
- "EXT3-fs: cannot change data "
- "mode on remount\n");
- return 0;
- }
+ == data_opt)
+ break;
+ printk(KERN_ERR
+ "EXT3-fs (device %s): Cannot change "
+ "data mode on remount. The filesystem "
+ "is mounted in data=%s mode and you "
+ "try to remount it in data=%s mode.\n",
+ sb->s_id,
+ data_mode_string(sbi->s_mount_opt &
+ EXT3_MOUNT_DATA_FLAGS),
+ data_mode_string(data_opt));
+ return 0;
} else {
sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS;
sbi->s_mount_opt |= data_opt;
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index f6d8967..0df88b2 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -236,7 +236,7 @@
return error;
}
-static int
+int
ext4_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = ext4_get_acl(inode, ACL_TYPE_ACCESS);
@@ -252,12 +252,6 @@
return -EAGAIN;
}
-int
-ext4_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, ext4_check_acl);
-}
-
/*
* Initialize the ACLs of a new inode. Called from ext4_new_inode.
*
diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h
index 949789d..9d843d5 100644
--- a/fs/ext4/acl.h
+++ b/fs/ext4/acl.h
@@ -54,13 +54,13 @@
#ifdef CONFIG_EXT4_FS_POSIX_ACL
/* acl.c */
-extern int ext4_permission(struct inode *, int);
+extern int ext4_check_acl(struct inode *, int);
extern int ext4_acl_chmod(struct inode *);
extern int ext4_init_acl(handle_t *, struct inode *, struct inode *);
#else /* CONFIG_EXT4_FS_POSIX_ACL */
#include <linux/sched.h>
-#define ext4_permission NULL
+#define ext4_check_acl NULL
static inline int
ext4_acl_chmod(struct inode *inode)
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 3f1873f..5ca3eca 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -58,10 +58,7 @@
ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
- struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_path.dentry->d_inode;
- ssize_t ret;
- int err;
+ struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
/*
* If we have encountered a bitmap-format file, the size limit
@@ -81,53 +78,7 @@
}
}
- ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
- /*
- * Skip flushing if there was an error, or if nothing was written.
- */
- if (ret <= 0)
- return ret;
-
- /*
- * If the inode is IS_SYNC, or is O_SYNC and we are doing data
- * journalling then we need to make sure that we force the transaction
- * to disk to keep all metadata uptodate synchronously.
- */
- if (file->f_flags & O_SYNC) {
- /*
- * If we are non-data-journaled, then the dirty data has
- * already been flushed to backing store by generic_osync_inode,
- * and the inode has been flushed too if there have been any
- * modifications other than mere timestamp updates.
- *
- * Open question --- do we care about flushing timestamps too
- * if the inode is IS_SYNC?
- */
- if (!ext4_should_journal_data(inode))
- return ret;
-
- goto force_commit;
- }
-
- /*
- * So we know that there has been no forced data flush. If the inode
- * is marked IS_SYNC, we need to force one ourselves.
- */
- if (!IS_SYNC(inode))
- return ret;
-
- /*
- * Open question #2 --- should we force data to disk here too? If we
- * don't, the only impact is that data=writeback filesystems won't
- * flush data to disk automatically on IS_SYNC, only metadata (but
- * historically, that is what ext2 has done.)
- */
-
-force_commit:
- err = ext4_force_commit(inode->i_sb);
- if (err)
- return err;
- return ret;
+ return generic_file_aio_write(iocb, iov, nr_segs, pos);
}
static struct vm_operations_struct ext4_file_vm_ops = {
@@ -207,7 +158,7 @@
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext4_permission,
+ .check_acl = ext4_check_acl,
.fallocate = ext4_fallocate,
.fiemap = ext4_fiemap,
};
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index de04013..114abe5 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2536,7 +2536,7 @@
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext4_permission,
+ .check_acl = ext4_check_acl,
.fiemap = ext4_fiemap,
};
@@ -2548,5 +2548,5 @@
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
- .permission = ext4_permission,
+ .check_acl = ext4_check_acl,
};
diff --git a/fs/fat/file.c b/fs/fat/file.c
index f042b96..e8c159d 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -176,8 +176,26 @@
inode->i_ctime = inode->i_mtime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
- if (IS_SYNC(inode))
- err = sync_page_range_nolock(inode, mapping, start, count);
+ if (IS_SYNC(inode)) {
+ int err2;
+
+ /*
+ * Opencode syncing since we don't have a file open to use
+ * standard fsync path.
+ */
+ err = filemap_fdatawrite_range(mapping, start,
+ start + count - 1);
+ err2 = sync_mapping_buffers(mapping);
+ if (!err)
+ err = err2;
+ err2 = write_inode_now(inode, 1);
+ if (!err)
+ err = err2;
+ if (!err) {
+ err = filemap_fdatawait_range(mapping, start,
+ start + count - 1);
+ }
+ }
out:
return err;
}
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index a6c2047..4e35be8 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -119,8 +119,8 @@
MSDOS_I(inode)->i_start = new_dclus;
MSDOS_I(inode)->i_logstart = new_dclus;
/*
- * Since generic_osync_inode() synchronize later if
- * this is not directory, we don't here.
+ * Since generic_write_sync() synchronizes regular files later,
+ * we sync here only directories.
*/
if (S_ISDIR(inode->i_mode) && IS_DIRSYNC(inode)) {
ret = fat_sync_inode(inode);
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index c54226b..628235c 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -19,49 +19,925 @@
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
#include "internal.h"
+#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-/**
- * writeback_acquire - attempt to get exclusive writeback access to a device
- * @bdi: the device's backing_dev_info structure
- *
- * It is a waste of resources to have more than one pdflush thread blocked on
- * a single request queue. Exclusion at the request_queue level is obtained
- * via a flag in the request_queue's backing_dev_info.state.
- *
- * Non-request_queue-backed address_spaces will share default_backing_dev_info,
- * unless they implement their own. Which is somewhat inefficient, as this
- * may prevent concurrent writeback against multiple devices.
+/*
+ * We don't actually have pdflush, but this one is exported though /proc...
*/
-static int writeback_acquire(struct backing_dev_info *bdi)
+int nr_pdflush_threads;
+
+/*
+ * Work items for the bdi_writeback threads
+ */
+struct bdi_work {
+ struct list_head list;
+ struct list_head wait_list;
+ struct rcu_head rcu_head;
+
+ unsigned long seen;
+ atomic_t pending;
+
+ struct super_block *sb;
+ unsigned long nr_pages;
+ enum writeback_sync_modes sync_mode;
+
+ unsigned long state;
+};
+
+enum {
+ WS_USED_B = 0,
+ WS_ONSTACK_B,
+};
+
+#define WS_USED (1 << WS_USED_B)
+#define WS_ONSTACK (1 << WS_ONSTACK_B)
+
+static inline bool bdi_work_on_stack(struct bdi_work *work)
{
- return !test_and_set_bit(BDI_pdflush, &bdi->state);
+ return test_bit(WS_ONSTACK_B, &work->state);
+}
+
+static inline void bdi_work_init(struct bdi_work *work,
+ struct writeback_control *wbc)
+{
+ INIT_RCU_HEAD(&work->rcu_head);
+ work->sb = wbc->sb;
+ work->nr_pages = wbc->nr_to_write;
+ work->sync_mode = wbc->sync_mode;
+ work->state = WS_USED;
+}
+
+static inline void bdi_work_init_on_stack(struct bdi_work *work,
+ struct writeback_control *wbc)
+{
+ bdi_work_init(work, wbc);
+ work->state |= WS_ONSTACK;
}
/**
* writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
*
- * Determine whether there is writeback in progress against a backing device.
+ * Determine whether there is writeback waiting to be handled against a
+ * backing device.
*/
int writeback_in_progress(struct backing_dev_info *bdi)
{
- return test_bit(BDI_pdflush, &bdi->state);
+ return !list_empty(&bdi->work_list);
}
-/**
- * writeback_release - relinquish exclusive writeback access against a device.
- * @bdi: the device's backing_dev_info structure
- */
-static void writeback_release(struct backing_dev_info *bdi)
+static void bdi_work_clear(struct bdi_work *work)
{
- BUG_ON(!writeback_in_progress(bdi));
- clear_bit(BDI_pdflush, &bdi->state);
+ clear_bit(WS_USED_B, &work->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&work->state, WS_USED_B);
+}
+
+static void bdi_work_free(struct rcu_head *head)
+{
+ struct bdi_work *work = container_of(head, struct bdi_work, rcu_head);
+
+ if (!bdi_work_on_stack(work))
+ kfree(work);
+ else
+ bdi_work_clear(work);
+}
+
+static void wb_work_complete(struct bdi_work *work)
+{
+ const enum writeback_sync_modes sync_mode = work->sync_mode;
+
+ /*
+ * For allocated work, we can clear the done/seen bit right here.
+ * For on-stack work, we need to postpone both the clear and free
+ * to after the RCU grace period, since the stack could be invalidated
+ * as soon as bdi_work_clear() has done the wakeup.
+ */
+ if (!bdi_work_on_stack(work))
+ bdi_work_clear(work);
+ if (sync_mode == WB_SYNC_NONE || bdi_work_on_stack(work))
+ call_rcu(&work->rcu_head, bdi_work_free);
+}
+
+static void wb_clear_pending(struct bdi_writeback *wb, struct bdi_work *work)
+{
+ /*
+ * The caller has retrieved the work arguments from this work,
+ * drop our reference. If this is the last ref, delete and free it
+ */
+ if (atomic_dec_and_test(&work->pending)) {
+ struct backing_dev_info *bdi = wb->bdi;
+
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&work->list);
+ spin_unlock(&bdi->wb_lock);
+
+ wb_work_complete(work);
+ }
+}
+
+static void bdi_queue_work(struct backing_dev_info *bdi, struct bdi_work *work)
+{
+ if (work) {
+ work->seen = bdi->wb_mask;
+ BUG_ON(!work->seen);
+ atomic_set(&work->pending, bdi->wb_cnt);
+ BUG_ON(!bdi->wb_cnt);
+
+ /*
+ * Make sure stores are seen before it appears on the list
+ */
+ smp_mb();
+
+ spin_lock(&bdi->wb_lock);
+ list_add_tail_rcu(&work->list, &bdi->work_list);
+ spin_unlock(&bdi->wb_lock);
+ }
+
+ /*
+ * If the default thread isn't there, make sure we add it. When
+ * it gets created and wakes up, we'll run this work.
+ */
+ if (unlikely(list_empty_careful(&bdi->wb_list)))
+ wake_up_process(default_backing_dev_info.wb.task);
+ else {
+ struct bdi_writeback *wb = &bdi->wb;
+
+ /*
+ * If we failed allocating the bdi work item, wake up the wb
+ * thread always. As a safety precaution, it'll flush out
+ * everything
+ */
+ if (!wb_has_dirty_io(wb)) {
+ if (work)
+ wb_clear_pending(wb, work);
+ } else if (wb->task)
+ wake_up_process(wb->task);
+ }
+}
+
+/*
+ * Used for on-stack allocated work items. The caller needs to wait until
+ * the wb threads have acked the work before it's safe to continue.
+ */
+static void bdi_wait_on_work_clear(struct bdi_work *work)
+{
+ wait_on_bit(&work->state, WS_USED_B, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+}
+
+static struct bdi_work *bdi_alloc_work(struct writeback_control *wbc)
+{
+ struct bdi_work *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work)
+ bdi_work_init(work, wbc);
+
+ return work;
+}
+
+void bdi_start_writeback(struct writeback_control *wbc)
+{
+ const bool must_wait = wbc->sync_mode == WB_SYNC_ALL;
+ struct bdi_work work_stack, *work = NULL;
+
+ if (!must_wait)
+ work = bdi_alloc_work(wbc);
+
+ if (!work) {
+ work = &work_stack;
+ bdi_work_init_on_stack(work, wbc);
+ }
+
+ bdi_queue_work(wbc->bdi, work);
+
+ /*
+ * If the sync mode is WB_SYNC_ALL, block waiting for the work to
+ * complete. If not, we only need to wait for the work to be started,
+ * if we allocated it on-stack. We use the same mechanism, if the
+ * wait bit is set in the bdi_work struct, then threads will not
+ * clear pending until after they are done.
+ *
+ * Note that work == &work_stack if must_wait is true, so we don't
+ * need to do call_rcu() here ever, since the completion path will
+ * have done that for us.
+ */
+ if (must_wait || work == &work_stack) {
+ bdi_wait_on_work_clear(work);
+ if (work != &work_stack)
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
+}
+
+/*
+ * Redirty an inode: set its when-it-was dirtied timestamp and move it to the
+ * furthest end of its superblock's dirty-inode list.
+ *
+ * Before stamping the inode's ->dirtied_when, we check to see whether it is
+ * already the most-recently-dirtied inode on the b_dirty list. If that is
+ * the case then the inode must have been redirtied while it was being written
+ * out and we don't reset its dirtied_when.
+ */
+static void redirty_tail(struct inode *inode)
+{
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+
+ if (!list_empty(&wb->b_dirty)) {
+ struct inode *tail;
+
+ tail = list_entry(wb->b_dirty.next, struct inode, i_list);
+ if (time_before(inode->dirtied_when, tail->dirtied_when))
+ inode->dirtied_when = jiffies;
+ }
+ list_move(&inode->i_list, &wb->b_dirty);
+}
+
+/*
+ * requeue inode for re-scanning after bdi->b_io list is exhausted.
+ */
+static void requeue_io(struct inode *inode)
+{
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+
+ list_move(&inode->i_list, &wb->b_more_io);
+}
+
+static void inode_sync_complete(struct inode *inode)
+{
+ /*
+ * Prevent speculative execution through spin_unlock(&inode_lock);
+ */
+ smp_mb();
+ wake_up_bit(&inode->i_state, __I_SYNC);
+}
+
+static bool inode_dirtied_after(struct inode *inode, unsigned long t)
+{
+ bool ret = time_after(inode->dirtied_when, t);
+#ifndef CONFIG_64BIT
+ /*
+ * For inodes being constantly redirtied, dirtied_when can get stuck.
+ * It _appears_ to be in the future, but is actually in distant past.
+ * This test is necessary to prevent such wrapped-around relative times
+ * from permanently stopping the whole pdflush writeback.
+ */
+ ret = ret && time_before_eq(inode->dirtied_when, jiffies);
+#endif
+ return ret;
+}
+
+/*
+ * Move expired dirty inodes from @delaying_queue to @dispatch_queue.
+ */
+static void move_expired_inodes(struct list_head *delaying_queue,
+ struct list_head *dispatch_queue,
+ unsigned long *older_than_this)
+{
+ while (!list_empty(delaying_queue)) {
+ struct inode *inode = list_entry(delaying_queue->prev,
+ struct inode, i_list);
+ if (older_than_this &&
+ inode_dirtied_after(inode, *older_than_this))
+ break;
+ list_move(&inode->i_list, dispatch_queue);
+ }
+}
+
+/*
+ * Queue all expired dirty inodes for io, eldest first.
+ */
+static void queue_io(struct bdi_writeback *wb, unsigned long *older_than_this)
+{
+ list_splice_init(&wb->b_more_io, wb->b_io.prev);
+ move_expired_inodes(&wb->b_dirty, &wb->b_io, older_than_this);
+}
+
+static int write_inode(struct inode *inode, int sync)
+{
+ if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
+ return inode->i_sb->s_op->write_inode(inode, sync);
+ return 0;
+}
+
+/*
+ * Wait for writeback on an inode to complete.
+ */
+static void inode_wait_for_writeback(struct inode *inode)
+{
+ DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
+ wait_queue_head_t *wqh;
+
+ wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
+ do {
+ spin_unlock(&inode_lock);
+ __wait_on_bit(wqh, &wq, inode_wait, TASK_UNINTERRUPTIBLE);
+ spin_lock(&inode_lock);
+ } while (inode->i_state & I_SYNC);
+}
+
+/*
+ * Write out an inode's dirty pages. Called under inode_lock. Either the
+ * caller has ref on the inode (either via __iget or via syscall against an fd)
+ * or the inode has I_WILL_FREE set (via generic_forget_inode)
+ *
+ * If `wait' is set, wait on the writeout.
+ *
+ * The whole writeout design is quite complex and fragile. We want to avoid
+ * starvation of particular inodes when others are being redirtied, prevent
+ * livelocks, etc.
+ *
+ * Called under inode_lock.
+ */
+static int
+writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
+{
+ struct address_space *mapping = inode->i_mapping;
+ int wait = wbc->sync_mode == WB_SYNC_ALL;
+ unsigned dirty;
+ int ret;
+
+ if (!atomic_read(&inode->i_count))
+ WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
+ else
+ WARN_ON(inode->i_state & I_WILL_FREE);
+
+ if (inode->i_state & I_SYNC) {
+ /*
+ * If this inode is locked for writeback and we are not doing
+ * writeback-for-data-integrity, move it to b_more_io so that
+ * writeback can proceed with the other inodes on s_io.
+ *
+ * We'll have another go at writing back this inode when we
+ * completed a full scan of b_io.
+ */
+ if (!wait) {
+ requeue_io(inode);
+ return 0;
+ }
+
+ /*
+ * It's a data-integrity sync. We must wait.
+ */
+ inode_wait_for_writeback(inode);
+ }
+
+ BUG_ON(inode->i_state & I_SYNC);
+
+ /* Set I_SYNC, reset I_DIRTY */
+ dirty = inode->i_state & I_DIRTY;
+ inode->i_state |= I_SYNC;
+ inode->i_state &= ~I_DIRTY;
+
+ spin_unlock(&inode_lock);
+
+ ret = do_writepages(mapping, wbc);
+
+ /* Don't write the inode if only I_DIRTY_PAGES was set */
+ if (dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
+ int err = write_inode(inode, wait);
+ if (ret == 0)
+ ret = err;
+ }
+
+ if (wait) {
+ int err = filemap_fdatawait(mapping);
+ if (ret == 0)
+ ret = err;
+ }
+
+ spin_lock(&inode_lock);
+ inode->i_state &= ~I_SYNC;
+ if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
+ if (!(inode->i_state & I_DIRTY) &&
+ mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+ /*
+ * We didn't write back all the pages. nfs_writepages()
+ * sometimes bales out without doing anything. Redirty
+ * the inode; Move it from b_io onto b_more_io/b_dirty.
+ */
+ /*
+ * akpm: if the caller was the kupdate function we put
+ * this inode at the head of b_dirty so it gets first
+ * consideration. Otherwise, move it to the tail, for
+ * the reasons described there. I'm not really sure
+ * how much sense this makes. Presumably I had a good
+ * reasons for doing it this way, and I'd rather not
+ * muck with it at present.
+ */
+ if (wbc->for_kupdate) {
+ /*
+ * For the kupdate function we move the inode
+ * to b_more_io so it will get more writeout as
+ * soon as the queue becomes uncongested.
+ */
+ inode->i_state |= I_DIRTY_PAGES;
+ if (wbc->nr_to_write <= 0) {
+ /*
+ * slice used up: queue for next turn
+ */
+ requeue_io(inode);
+ } else {
+ /*
+ * somehow blocked: retry later
+ */
+ redirty_tail(inode);
+ }
+ } else {
+ /*
+ * Otherwise fully redirty the inode so that
+ * other inodes on this superblock will get some
+ * writeout. Otherwise heavy writing to one
+ * file would indefinitely suspend writeout of
+ * all the other files.
+ */
+ inode->i_state |= I_DIRTY_PAGES;
+ redirty_tail(inode);
+ }
+ } else if (inode->i_state & I_DIRTY) {
+ /*
+ * Someone redirtied the inode while were writing back
+ * the pages.
+ */
+ redirty_tail(inode);
+ } else if (atomic_read(&inode->i_count)) {
+ /*
+ * The inode is clean, inuse
+ */
+ list_move(&inode->i_list, &inode_in_use);
+ } else {
+ /*
+ * The inode is clean, unused
+ */
+ list_move(&inode->i_list, &inode_unused);
+ }
+ }
+ inode_sync_complete(inode);
+ return ret;
+}
+
+/*
+ * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
+ * before calling writeback. So make sure that we do pin it, so it doesn't
+ * go away while we are writing inodes from it.
+ *
+ * Returns 0 if the super was successfully pinned (or pinning wasn't needed),
+ * 1 if we failed.
+ */
+static int pin_sb_for_writeback(struct writeback_control *wbc,
+ struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ /*
+ * Caller must already hold the ref for this
+ */
+ if (wbc->sync_mode == WB_SYNC_ALL) {
+ WARN_ON(!rwsem_is_locked(&sb->s_umount));
+ return 0;
+ }
+
+ spin_lock(&sb_lock);
+ sb->s_count++;
+ if (down_read_trylock(&sb->s_umount)) {
+ if (sb->s_root) {
+ spin_unlock(&sb_lock);
+ return 0;
+ }
+ /*
+ * umounted, drop rwsem again and fall through to failure
+ */
+ up_read(&sb->s_umount);
+ }
+
+ sb->s_count--;
+ spin_unlock(&sb_lock);
+ return 1;
+}
+
+static void unpin_sb_for_writeback(struct writeback_control *wbc,
+ struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ if (wbc->sync_mode == WB_SYNC_ALL)
+ return;
+
+ up_read(&sb->s_umount);
+ put_super(sb);
+}
+
+static void writeback_inodes_wb(struct bdi_writeback *wb,
+ struct writeback_control *wbc)
+{
+ struct super_block *sb = wbc->sb;
+ const int is_blkdev_sb = sb_is_blkdev_sb(sb);
+ const unsigned long start = jiffies; /* livelock avoidance */
+
+ spin_lock(&inode_lock);
+
+ if (!wbc->for_kupdate || list_empty(&wb->b_io))
+ queue_io(wb, wbc->older_than_this);
+
+ while (!list_empty(&wb->b_io)) {
+ struct inode *inode = list_entry(wb->b_io.prev,
+ struct inode, i_list);
+ long pages_skipped;
+
+ /*
+ * super block given and doesn't match, skip this inode
+ */
+ if (sb && sb != inode->i_sb) {
+ redirty_tail(inode);
+ continue;
+ }
+
+ if (!bdi_cap_writeback_dirty(wb->bdi)) {
+ redirty_tail(inode);
+ if (is_blkdev_sb) {
+ /*
+ * Dirty memory-backed blockdev: the ramdisk
+ * driver does this. Skip just this inode
+ */
+ continue;
+ }
+ /*
+ * Dirty memory-backed inode against a filesystem other
+ * than the kernel-internal bdev filesystem. Skip the
+ * entire superblock.
+ */
+ break;
+ }
+
+ if (inode->i_state & (I_NEW | I_WILL_FREE)) {
+ requeue_io(inode);
+ continue;
+ }
+
+ if (wbc->nonblocking && bdi_write_congested(wb->bdi)) {
+ wbc->encountered_congestion = 1;
+ if (!is_blkdev_sb)
+ break; /* Skip a congested fs */
+ requeue_io(inode);
+ continue; /* Skip a congested blockdev */
+ }
+
+ /*
+ * Was this inode dirtied after sync_sb_inodes was called?
+ * This keeps sync from extra jobs and livelock.
+ */
+ if (inode_dirtied_after(inode, start))
+ break;
+
+ if (pin_sb_for_writeback(wbc, inode)) {
+ requeue_io(inode);
+ continue;
+ }
+
+ BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
+ __iget(inode);
+ pages_skipped = wbc->pages_skipped;
+ writeback_single_inode(inode, wbc);
+ unpin_sb_for_writeback(wbc, inode);
+ if (wbc->pages_skipped != pages_skipped) {
+ /*
+ * writeback is not making progress due to locked
+ * buffers. Skip this inode for now.
+ */
+ redirty_tail(inode);
+ }
+ spin_unlock(&inode_lock);
+ iput(inode);
+ cond_resched();
+ spin_lock(&inode_lock);
+ if (wbc->nr_to_write <= 0) {
+ wbc->more_io = 1;
+ break;
+ }
+ if (!list_empty(&wb->b_more_io))
+ wbc->more_io = 1;
+ }
+
+ spin_unlock(&inode_lock);
+ /* Leave any unwritten inodes on b_io */
+}
+
+void writeback_inodes_wbc(struct writeback_control *wbc)
+{
+ struct backing_dev_info *bdi = wbc->bdi;
+
+ writeback_inodes_wb(&bdi->wb, wbc);
+}
+
+/*
+ * The maximum number of pages to writeout in a single bdi flush/kupdate
+ * operation. We do this so we don't hold I_SYNC against an inode for
+ * enormous amounts of time, which would block a userspace task which has
+ * been forced to throttle against that inode. Also, the code reevaluates
+ * the dirty each time it has written this many pages.
+ */
+#define MAX_WRITEBACK_PAGES 1024
+
+static inline bool over_bground_thresh(void)
+{
+ unsigned long background_thresh, dirty_thresh;
+
+ get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
+
+ return (global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) >= background_thresh);
+}
+
+/*
+ * Explicit flushing or periodic writeback of "old" data.
+ *
+ * Define "old": the first time one of an inode's pages is dirtied, we mark the
+ * dirtying-time in the inode's address_space. So this periodic writeback code
+ * just walks the superblock inode list, writing back any inodes which are
+ * older than a specific point in time.
+ *
+ * Try to run once per dirty_writeback_interval. But if a writeback event
+ * takes longer than a dirty_writeback_interval interval, then leave a
+ * one-second gap.
+ *
+ * older_than_this takes precedence over nr_to_write. So we'll only write back
+ * all dirty pages if they are all attached to "old" mappings.
+ */
+static long wb_writeback(struct bdi_writeback *wb, long nr_pages,
+ struct super_block *sb,
+ enum writeback_sync_modes sync_mode, int for_kupdate)
+{
+ struct writeback_control wbc = {
+ .bdi = wb->bdi,
+ .sb = sb,
+ .sync_mode = sync_mode,
+ .older_than_this = NULL,
+ .for_kupdate = for_kupdate,
+ .range_cyclic = 1,
+ };
+ unsigned long oldest_jif;
+ long wrote = 0;
+
+ if (wbc.for_kupdate) {
+ wbc.older_than_this = &oldest_jif;
+ oldest_jif = jiffies -
+ msecs_to_jiffies(dirty_expire_interval * 10);
+ }
+
+ for (;;) {
+ /*
+ * Don't flush anything for non-integrity writeback where
+ * no nr_pages was given
+ */
+ if (!for_kupdate && nr_pages <= 0 && sync_mode == WB_SYNC_NONE)
+ break;
+
+ /*
+ * If no specific pages were given and this is just a
+ * periodic background writeout and we are below the
+ * background dirty threshold, don't do anything
+ */
+ if (for_kupdate && nr_pages <= 0 && !over_bground_thresh())
+ break;
+
+ wbc.more_io = 0;
+ wbc.encountered_congestion = 0;
+ wbc.nr_to_write = MAX_WRITEBACK_PAGES;
+ wbc.pages_skipped = 0;
+ writeback_inodes_wb(wb, &wbc);
+ nr_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+ wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
+
+ /*
+ * If we ran out of stuff to write, bail unless more_io got set
+ */
+ if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
+ if (wbc.more_io && !wbc.for_kupdate)
+ continue;
+ break;
+ }
+ }
+
+ return wrote;
+}
+
+/*
+ * Return the next bdi_work struct that hasn't been processed by this
+ * wb thread yet
+ */
+static struct bdi_work *get_next_work_item(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct bdi_work *work, *ret = NULL;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(work, &bdi->work_list, list) {
+ if (!test_and_clear_bit(wb->nr, &work->seen))
+ continue;
+
+ ret = work;
+ break;
+ }
+
+ rcu_read_unlock();
+ return ret;
+}
+
+static long wb_check_old_data_flush(struct bdi_writeback *wb)
+{
+ unsigned long expired;
+ long nr_pages;
+
+ expired = wb->last_old_flush +
+ msecs_to_jiffies(dirty_writeback_interval * 10);
+ if (time_before(jiffies, expired))
+ return 0;
+
+ wb->last_old_flush = jiffies;
+ nr_pages = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS) +
+ (inodes_stat.nr_inodes - inodes_stat.nr_unused);
+
+ if (nr_pages)
+ return wb_writeback(wb, nr_pages, NULL, WB_SYNC_NONE, 1);
+
+ return 0;
+}
+
+/*
+ * Retrieve work items and do the writeback they describe
+ */
+long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
+{
+ struct backing_dev_info *bdi = wb->bdi;
+ struct bdi_work *work;
+ long nr_pages, wrote = 0;
+
+ while ((work = get_next_work_item(bdi, wb)) != NULL) {
+ enum writeback_sync_modes sync_mode;
+
+ nr_pages = work->nr_pages;
+
+ /*
+ * Override sync mode, in case we must wait for completion
+ */
+ if (force_wait)
+ work->sync_mode = sync_mode = WB_SYNC_ALL;
+ else
+ sync_mode = work->sync_mode;
+
+ /*
+ * If this isn't a data integrity operation, just notify
+ * that we have seen this work and we are now starting it.
+ */
+ if (sync_mode == WB_SYNC_NONE)
+ wb_clear_pending(wb, work);
+
+ wrote += wb_writeback(wb, nr_pages, work->sb, sync_mode, 0);
+
+ /*
+ * This is a data integrity writeback, so only do the
+ * notification when we have completed the work.
+ */
+ if (sync_mode == WB_SYNC_ALL)
+ wb_clear_pending(wb, work);
+ }
+
+ /*
+ * Check for periodic writeback, kupdated() style
+ */
+ wrote += wb_check_old_data_flush(wb);
+
+ return wrote;
+}
+
+/*
+ * Handle writeback of dirty data for the device backed by this bdi. Also
+ * wakes up periodically and does kupdated style flushing.
+ */
+int bdi_writeback_task(struct bdi_writeback *wb)
+{
+ unsigned long last_active = jiffies;
+ unsigned long wait_jiffies = -1UL;
+ long pages_written;
+
+ while (!kthread_should_stop()) {
+ pages_written = wb_do_writeback(wb, 0);
+
+ if (pages_written)
+ last_active = jiffies;
+ else if (wait_jiffies != -1UL) {
+ unsigned long max_idle;
+
+ /*
+ * Longest period of inactivity that we tolerate. If we
+ * see dirty data again later, the task will get
+ * recreated automatically.
+ */
+ max_idle = max(5UL * 60 * HZ, wait_jiffies);
+ if (time_after(jiffies, max_idle + last_active))
+ break;
+ }
+
+ wait_jiffies = msecs_to_jiffies(dirty_writeback_interval * 10);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(wait_jiffies);
+ try_to_freeze();
+ }
+
+ return 0;
+}
+
+/*
+ * Schedule writeback for all backing devices. Expensive! If this is a data
+ * integrity operation, writeback will be complete when this returns. If
+ * we are simply called for WB_SYNC_NONE, then writeback will merely be
+ * scheduled to run.
+ */
+static void bdi_writeback_all(struct writeback_control *wbc)
+{
+ const bool must_wait = wbc->sync_mode == WB_SYNC_ALL;
+ struct backing_dev_info *bdi;
+ struct bdi_work *work;
+ LIST_HEAD(list);
+
+restart:
+ spin_lock(&bdi_lock);
+
+ list_for_each_entry(bdi, &bdi_list, bdi_list) {
+ struct bdi_work *work;
+
+ if (!bdi_has_dirty_io(bdi))
+ continue;
+
+ /*
+ * If work allocation fails, do the writes inline. We drop
+ * the lock and restart the list writeout. This should be OK,
+ * since this happens rarely and because the writeout should
+ * eventually make more free memory available.
+ */
+ work = bdi_alloc_work(wbc);
+ if (!work) {
+ struct writeback_control __wbc;
+
+ /*
+ * Not a data integrity writeout, just continue
+ */
+ if (!must_wait)
+ continue;
+
+ spin_unlock(&bdi_lock);
+ __wbc = *wbc;
+ __wbc.bdi = bdi;
+ writeback_inodes_wbc(&__wbc);
+ goto restart;
+ }
+ if (must_wait)
+ list_add_tail(&work->wait_list, &list);
+
+ bdi_queue_work(bdi, work);
+ }
+
+ spin_unlock(&bdi_lock);
+
+ /*
+ * If this is for WB_SYNC_ALL, wait for pending work to complete
+ * before returning.
+ */
+ while (!list_empty(&list)) {
+ work = list_entry(list.next, struct bdi_work, wait_list);
+ list_del(&work->wait_list);
+ bdi_wait_on_work_clear(work);
+ call_rcu(&work->rcu_head, bdi_work_free);
+ }
+}
+
+/*
+ * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
+ * the whole world.
+ */
+void wakeup_flusher_threads(long nr_pages)
+{
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ };
+
+ if (nr_pages == 0)
+ nr_pages = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS);
+ wbc.nr_to_write = nr_pages;
+ bdi_writeback_all(&wbc);
}
static noinline void block_dump___mark_inode_dirty(struct inode *inode)
@@ -165,274 +1041,29 @@
goto out;
/*
- * If the inode was already on s_dirty/s_io/s_more_io, don't
- * reposition it (that would break s_dirty time-ordering).
+ * If the inode was already on b_dirty/b_io/b_more_io, don't
+ * reposition it (that would break b_dirty time-ordering).
*/
if (!was_dirty) {
+ struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
+ struct backing_dev_info *bdi = wb->bdi;
+
+ if (bdi_cap_writeback_dirty(bdi) &&
+ !test_bit(BDI_registered, &bdi->state)) {
+ WARN_ON(1);
+ printk(KERN_ERR "bdi-%s not registered\n",
+ bdi->name);
+ }
+
inode->dirtied_when = jiffies;
- list_move(&inode->i_list, &sb->s_dirty);
+ list_move(&inode->i_list, &wb->b_dirty);
}
}
out:
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(__mark_inode_dirty);
-static int write_inode(struct inode *inode, int sync)
-{
- if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
- return inode->i_sb->s_op->write_inode(inode, sync);
- return 0;
-}
-
-/*
- * Redirty an inode: set its when-it-was dirtied timestamp and move it to the
- * furthest end of its superblock's dirty-inode list.
- *
- * Before stamping the inode's ->dirtied_when, we check to see whether it is
- * already the most-recently-dirtied inode on the s_dirty list. If that is
- * the case then the inode must have been redirtied while it was being written
- * out and we don't reset its dirtied_when.
- */
-static void redirty_tail(struct inode *inode)
-{
- struct super_block *sb = inode->i_sb;
-
- if (!list_empty(&sb->s_dirty)) {
- struct inode *tail_inode;
-
- tail_inode = list_entry(sb->s_dirty.next, struct inode, i_list);
- if (time_before(inode->dirtied_when,
- tail_inode->dirtied_when))
- inode->dirtied_when = jiffies;
- }
- list_move(&inode->i_list, &sb->s_dirty);
-}
-
-/*
- * requeue inode for re-scanning after sb->s_io list is exhausted.
- */
-static void requeue_io(struct inode *inode)
-{
- list_move(&inode->i_list, &inode->i_sb->s_more_io);
-}
-
-static void inode_sync_complete(struct inode *inode)
-{
- /*
- * Prevent speculative execution through spin_unlock(&inode_lock);
- */
- smp_mb();
- wake_up_bit(&inode->i_state, __I_SYNC);
-}
-
-static bool inode_dirtied_after(struct inode *inode, unsigned long t)
-{
- bool ret = time_after(inode->dirtied_when, t);
-#ifndef CONFIG_64BIT
- /*
- * For inodes being constantly redirtied, dirtied_when can get stuck.
- * It _appears_ to be in the future, but is actually in distant past.
- * This test is necessary to prevent such wrapped-around relative times
- * from permanently stopping the whole pdflush writeback.
- */
- ret = ret && time_before_eq(inode->dirtied_when, jiffies);
-#endif
- return ret;
-}
-
-/*
- * Move expired dirty inodes from @delaying_queue to @dispatch_queue.
- */
-static void move_expired_inodes(struct list_head *delaying_queue,
- struct list_head *dispatch_queue,
- unsigned long *older_than_this)
-{
- while (!list_empty(delaying_queue)) {
- struct inode *inode = list_entry(delaying_queue->prev,
- struct inode, i_list);
- if (older_than_this &&
- inode_dirtied_after(inode, *older_than_this))
- break;
- list_move(&inode->i_list, dispatch_queue);
- }
-}
-
-/*
- * Queue all expired dirty inodes for io, eldest first.
- */
-static void queue_io(struct super_block *sb,
- unsigned long *older_than_this)
-{
- list_splice_init(&sb->s_more_io, sb->s_io.prev);
- move_expired_inodes(&sb->s_dirty, &sb->s_io, older_than_this);
-}
-
-int sb_has_dirty_inodes(struct super_block *sb)
-{
- return !list_empty(&sb->s_dirty) ||
- !list_empty(&sb->s_io) ||
- !list_empty(&sb->s_more_io);
-}
-EXPORT_SYMBOL(sb_has_dirty_inodes);
-
-/*
- * Wait for writeback on an inode to complete.
- */
-static void inode_wait_for_writeback(struct inode *inode)
-{
- DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
- wait_queue_head_t *wqh;
-
- wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
- do {
- spin_unlock(&inode_lock);
- __wait_on_bit(wqh, &wq, inode_wait, TASK_UNINTERRUPTIBLE);
- spin_lock(&inode_lock);
- } while (inode->i_state & I_SYNC);
-}
-
-/*
- * Write out an inode's dirty pages. Called under inode_lock. Either the
- * caller has ref on the inode (either via __iget or via syscall against an fd)
- * or the inode has I_WILL_FREE set (via generic_forget_inode)
- *
- * If `wait' is set, wait on the writeout.
- *
- * The whole writeout design is quite complex and fragile. We want to avoid
- * starvation of particular inodes when others are being redirtied, prevent
- * livelocks, etc.
- *
- * Called under inode_lock.
- */
-static int
-writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
-{
- struct address_space *mapping = inode->i_mapping;
- int wait = wbc->sync_mode == WB_SYNC_ALL;
- unsigned dirty;
- int ret;
-
- if (!atomic_read(&inode->i_count))
- WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
- else
- WARN_ON(inode->i_state & I_WILL_FREE);
-
- if (inode->i_state & I_SYNC) {
- /*
- * If this inode is locked for writeback and we are not doing
- * writeback-for-data-integrity, move it to s_more_io so that
- * writeback can proceed with the other inodes on s_io.
- *
- * We'll have another go at writing back this inode when we
- * completed a full scan of s_io.
- */
- if (!wait) {
- requeue_io(inode);
- return 0;
- }
-
- /*
- * It's a data-integrity sync. We must wait.
- */
- inode_wait_for_writeback(inode);
- }
-
- BUG_ON(inode->i_state & I_SYNC);
-
- /* Set I_SYNC, reset I_DIRTY */
- dirty = inode->i_state & I_DIRTY;
- inode->i_state |= I_SYNC;
- inode->i_state &= ~I_DIRTY;
-
- spin_unlock(&inode_lock);
-
- ret = do_writepages(mapping, wbc);
-
- /* Don't write the inode if only I_DIRTY_PAGES was set */
- if (dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
- int err = write_inode(inode, wait);
- if (ret == 0)
- ret = err;
- }
-
- if (wait) {
- int err = filemap_fdatawait(mapping);
- if (ret == 0)
- ret = err;
- }
-
- spin_lock(&inode_lock);
- inode->i_state &= ~I_SYNC;
- if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
- if (!(inode->i_state & I_DIRTY) &&
- mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
- /*
- * We didn't write back all the pages. nfs_writepages()
- * sometimes bales out without doing anything. Redirty
- * the inode; Move it from s_io onto s_more_io/s_dirty.
- */
- /*
- * akpm: if the caller was the kupdate function we put
- * this inode at the head of s_dirty so it gets first
- * consideration. Otherwise, move it to the tail, for
- * the reasons described there. I'm not really sure
- * how much sense this makes. Presumably I had a good
- * reasons for doing it this way, and I'd rather not
- * muck with it at present.
- */
- if (wbc->for_kupdate) {
- /*
- * For the kupdate function we move the inode
- * to s_more_io so it will get more writeout as
- * soon as the queue becomes uncongested.
- */
- inode->i_state |= I_DIRTY_PAGES;
- if (wbc->nr_to_write <= 0) {
- /*
- * slice used up: queue for next turn
- */
- requeue_io(inode);
- } else {
- /*
- * somehow blocked: retry later
- */
- redirty_tail(inode);
- }
- } else {
- /*
- * Otherwise fully redirty the inode so that
- * other inodes on this superblock will get some
- * writeout. Otherwise heavy writing to one
- * file would indefinitely suspend writeout of
- * all the other files.
- */
- inode->i_state |= I_DIRTY_PAGES;
- redirty_tail(inode);
- }
- } else if (inode->i_state & I_DIRTY) {
- /*
- * Someone redirtied the inode while were writing back
- * the pages.
- */
- redirty_tail(inode);
- } else if (atomic_read(&inode->i_count)) {
- /*
- * The inode is clean, inuse
- */
- list_move(&inode->i_list, &inode_in_use);
- } else {
- /*
- * The inode is clean, unused
- */
- list_move(&inode->i_list, &inode_unused);
- }
- }
- inode_sync_complete(inode);
- return ret;
-}
-
/*
* Write out a superblock's list of dirty inodes. A wait will be performed
* upon no inodes, all inodes or the final one, depending upon sync_mode.
@@ -440,7 +1071,7 @@
* If older_than_this is non-NULL, then only write out inodes which
* had their first dirtying at a time earlier than *older_than_this.
*
- * If we're a pdflush thread, then implement pdflush collision avoidance
+ * If we're a pdlfush thread, then implement pdflush collision avoidance
* against the entire list.
*
* If `bdi' is non-zero then we're being asked to writeback a specific queue.
@@ -448,240 +1079,114 @@
* a variety of queues, so all inodes are searched. For other superblocks,
* assume that all inodes are backed by the same queue.
*
- * FIXME: this linear search could get expensive with many fileystems. But
- * how to fix? We need to go from an address_space to all inodes which share
- * a queue with that address_space. (Easy: have a global "dirty superblocks"
- * list).
- *
- * The inodes to be written are parked on sb->s_io. They are moved back onto
- * sb->s_dirty as they are selected for writing. This way, none can be missed
+ * The inodes to be written are parked on bdi->b_io. They are moved back onto
+ * bdi->b_dirty as they are selected for writing. This way, none can be missed
* on the writer throttling path, and we get decent balancing between many
* throttled threads: we don't want them all piling up on inode_sync_wait.
*/
-void generic_sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc)
+static void wait_sb_inodes(struct writeback_control *wbc)
{
- const unsigned long start = jiffies; /* livelock avoidance */
- int sync = wbc->sync_mode == WB_SYNC_ALL;
+ struct inode *inode, *old_inode = NULL;
+
+ /*
+ * We need to be protected against the filesystem going from
+ * r/o to r/w or vice versa.
+ */
+ WARN_ON(!rwsem_is_locked(&wbc->sb->s_umount));
spin_lock(&inode_lock);
- if (!wbc->for_kupdate || list_empty(&sb->s_io))
- queue_io(sb, wbc->older_than_this);
- while (!list_empty(&sb->s_io)) {
- struct inode *inode = list_entry(sb->s_io.prev,
- struct inode, i_list);
- struct address_space *mapping = inode->i_mapping;
- struct backing_dev_info *bdi = mapping->backing_dev_info;
- long pages_skipped;
+ /*
+ * Data integrity sync. Must wait for all pages under writeback,
+ * because there may have been pages dirtied before our sync
+ * call, but which had writeout started before we write it out.
+ * In which case, the inode may not be on the dirty list, but
+ * we still have to wait for that writeout.
+ */
+ list_for_each_entry(inode, &wbc->sb->s_inodes, i_sb_list) {
+ struct address_space *mapping;
- if (!bdi_cap_writeback_dirty(bdi)) {
- redirty_tail(inode);
- if (sb_is_blkdev_sb(sb)) {
- /*
- * Dirty memory-backed blockdev: the ramdisk
- * driver does this. Skip just this inode
- */
- continue;
- }
- /*
- * Dirty memory-backed inode against a filesystem other
- * than the kernel-internal bdev filesystem. Skip the
- * entire superblock.
- */
- break;
- }
-
- if (inode->i_state & (I_NEW | I_WILL_FREE)) {
- requeue_io(inode);
+ if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
continue;
- }
-
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- if (!sb_is_blkdev_sb(sb))
- break; /* Skip a congested fs */
- requeue_io(inode);
- continue; /* Skip a congested blockdev */
- }
-
- if (wbc->bdi && bdi != wbc->bdi) {
- if (!sb_is_blkdev_sb(sb))
- break; /* fs has the wrong queue */
- requeue_io(inode);
- continue; /* blockdev has wrong queue */
- }
-
- /*
- * Was this inode dirtied after sync_sb_inodes was called?
- * This keeps sync from extra jobs and livelock.
- */
- if (inode_dirtied_after(inode, start))
- break;
-
- /* Is another pdflush already flushing this queue? */
- if (current_is_pdflush() && !writeback_acquire(bdi))
- break;
-
- BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
+ mapping = inode->i_mapping;
+ if (mapping->nrpages == 0)
+ continue;
__iget(inode);
- pages_skipped = wbc->pages_skipped;
- writeback_single_inode(inode, wbc);
- if (current_is_pdflush())
- writeback_release(bdi);
- if (wbc->pages_skipped != pages_skipped) {
- /*
- * writeback is not making progress due to locked
- * buffers. Skip this inode for now.
- */
- redirty_tail(inode);
- }
spin_unlock(&inode_lock);
- iput(inode);
- cond_resched();
- spin_lock(&inode_lock);
- if (wbc->nr_to_write <= 0) {
- wbc->more_io = 1;
- break;
- }
- if (!list_empty(&sb->s_more_io))
- wbc->more_io = 1;
- }
-
- if (sync) {
- struct inode *inode, *old_inode = NULL;
-
/*
- * Data integrity sync. Must wait for all pages under writeback,
- * because there may have been pages dirtied before our sync
- * call, but which had writeout started before we write it out.
- * In which case, the inode may not be on the dirty list, but
- * we still have to wait for that writeout.
+ * We hold a reference to 'inode' so it couldn't have
+ * been removed from s_inodes list while we dropped the
+ * inode_lock. We cannot iput the inode now as we can
+ * be holding the last reference and we cannot iput it
+ * under inode_lock. So we keep the reference and iput
+ * it later.
*/
- list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
- struct address_space *mapping;
-
- if (inode->i_state &
- (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
- continue;
- mapping = inode->i_mapping;
- if (mapping->nrpages == 0)
- continue;
- __iget(inode);
- spin_unlock(&inode_lock);
- /*
- * We hold a reference to 'inode' so it couldn't have
- * been removed from s_inodes list while we dropped the
- * inode_lock. We cannot iput the inode now as we can
- * be holding the last reference and we cannot iput it
- * under inode_lock. So we keep the reference and iput
- * it later.
- */
- iput(old_inode);
- old_inode = inode;
-
- filemap_fdatawait(mapping);
-
- cond_resched();
-
- spin_lock(&inode_lock);
- }
- spin_unlock(&inode_lock);
iput(old_inode);
- } else
- spin_unlock(&inode_lock);
+ old_inode = inode;
- return; /* Leave any unwritten inodes on s_io */
-}
-EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
+ filemap_fdatawait(mapping);
-static void sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc)
-{
- generic_sync_sb_inodes(sb, wbc);
-}
+ cond_resched();
-/*
- * Start writeback of dirty pagecache data against all unlocked inodes.
- *
- * Note:
- * We don't need to grab a reference to superblock here. If it has non-empty
- * ->s_dirty it's hadn't been killed yet and kill_super() won't proceed
- * past sync_inodes_sb() until the ->s_dirty/s_io/s_more_io lists are all
- * empty. Since __sync_single_inode() regains inode_lock before it finally moves
- * inode from superblock lists we are OK.
- *
- * If `older_than_this' is non-zero then only flush inodes which have a
- * flushtime older than *older_than_this.
- *
- * If `bdi' is non-zero then we will scan the first inode against each
- * superblock until we find the matching ones. One group will be the dirty
- * inodes against a filesystem. Then when we hit the dummy blockdev superblock,
- * sync_sb_inodes will seekout the blockdev which matches `bdi'. Maybe not
- * super-efficient but we're about to do a ton of I/O...
- */
-void
-writeback_inodes(struct writeback_control *wbc)
-{
- struct super_block *sb;
-
- might_sleep();
- spin_lock(&sb_lock);
-restart:
- list_for_each_entry_reverse(sb, &super_blocks, s_list) {
- if (sb_has_dirty_inodes(sb)) {
- /* we're making our own get_super here */
- sb->s_count++;
- spin_unlock(&sb_lock);
- /*
- * If we can't get the readlock, there's no sense in
- * waiting around, most of the time the FS is going to
- * be unmounted by the time it is released.
- */
- if (down_read_trylock(&sb->s_umount)) {
- if (sb->s_root)
- sync_sb_inodes(sb, wbc);
- up_read(&sb->s_umount);
- }
- spin_lock(&sb_lock);
- if (__put_super_and_need_restart(sb))
- goto restart;
- }
- if (wbc->nr_to_write <= 0)
- break;
+ spin_lock(&inode_lock);
}
- spin_unlock(&sb_lock);
+ spin_unlock(&inode_lock);
+ iput(old_inode);
}
-/*
- * writeback and wait upon the filesystem's dirty inodes. The caller will
- * do this in two passes - one to write, and one to wait.
+/**
+ * writeback_inodes_sb - writeback dirty inodes from given super_block
+ * @sb: the superblock
*
- * A finite limit is set on the number of pages which will be written.
- * To prevent infinite livelock of sys_sync().
- *
- * We add in the number of potentially dirty inodes, because each inode write
- * can dirty pagecache in the underlying blockdev.
+ * Start writeback on some inodes on this super_block. No guarantees are made
+ * on how many (if any) will be written, and this function does not wait
+ * for IO completion of submitted IO. The number of pages submitted is
+ * returned.
*/
-void sync_inodes_sb(struct super_block *sb, int wait)
+long writeback_inodes_sb(struct super_block *sb)
{
struct writeback_control wbc = {
- .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
+ .sb = sb,
+ .sync_mode = WB_SYNC_NONE,
.range_start = 0,
.range_end = LLONG_MAX,
};
+ unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
+ unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
+ long nr_to_write;
- if (!wait) {
- unsigned long nr_dirty = global_page_state(NR_FILE_DIRTY);
- unsigned long nr_unstable = global_page_state(NR_UNSTABLE_NFS);
-
- wbc.nr_to_write = nr_dirty + nr_unstable +
+ nr_to_write = nr_dirty + nr_unstable +
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
- } else
- wbc.nr_to_write = LONG_MAX; /* doesn't actually matter */
- sync_sb_inodes(sb, &wbc);
+ wbc.nr_to_write = nr_to_write;
+ bdi_writeback_all(&wbc);
+ return nr_to_write - wbc.nr_to_write;
}
+EXPORT_SYMBOL(writeback_inodes_sb);
+
+/**
+ * sync_inodes_sb - sync sb inode pages
+ * @sb: the superblock
+ *
+ * This function writes and waits on any dirty inode belonging to this
+ * super_block. The number of pages synced is returned.
+ */
+long sync_inodes_sb(struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .sb = sb,
+ .sync_mode = WB_SYNC_ALL,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ };
+ long nr_to_write = LONG_MAX; /* doesn't actually matter */
+
+ wbc.nr_to_write = nr_to_write;
+ bdi_writeback_all(&wbc);
+ wait_sb_inodes(&wbc);
+ return nr_to_write - wbc.nr_to_write;
+}
+EXPORT_SYMBOL(sync_inodes_sb);
/**
* write_inode_now - write an inode to disk
@@ -737,57 +1242,3 @@
return ret;
}
EXPORT_SYMBOL(sync_inode);
-
-/**
- * generic_osync_inode - flush all dirty data for a given inode to disk
- * @inode: inode to write
- * @mapping: the address_space that should be flushed
- * @what: what to write and wait upon
- *
- * This can be called by file_write functions for files which have the
- * O_SYNC flag set, to flush dirty writes to disk.
- *
- * @what is a bitmask, specifying which part of the inode's data should be
- * written and waited upon.
- *
- * OSYNC_DATA: i_mapping's dirty data
- * OSYNC_METADATA: the buffers at i_mapping->private_list
- * OSYNC_INODE: the inode itself
- */
-
-int generic_osync_inode(struct inode *inode, struct address_space *mapping, int what)
-{
- int err = 0;
- int need_write_inode_now = 0;
- int err2;
-
- if (what & OSYNC_DATA)
- err = filemap_fdatawrite(mapping);
- if (what & (OSYNC_METADATA|OSYNC_DATA)) {
- err2 = sync_mapping_buffers(mapping);
- if (!err)
- err = err2;
- }
- if (what & OSYNC_DATA) {
- err2 = filemap_fdatawait(mapping);
- if (!err)
- err = err2;
- }
-
- spin_lock(&inode_lock);
- if ((inode->i_state & I_DIRTY) &&
- ((what & OSYNC_INODE) || (inode->i_state & I_DIRTY_DATASYNC)))
- need_write_inode_now = 1;
- spin_unlock(&inode_lock);
-
- if (need_write_inode_now) {
- err2 = write_inode_now(inode, 1);
- if (!err)
- err = err2;
- }
- else
- inode_sync_wait(inode);
-
- return err;
-}
-EXPORT_SYMBOL(generic_osync_inode);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index f91ccc4..4567db6 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -801,6 +801,7 @@
{
int err;
+ fc->bdi.name = "fuse";
fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
fc->bdi.unplug_io_fn = default_unplug_io_fn;
/* fuse does it's own writeback accounting */
diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile
index 3da2f1f..21f7e46 100644
--- a/fs/gfs2/Makefile
+++ b/fs/gfs2/Makefile
@@ -1,6 +1,6 @@
EXTRA_CFLAGS := -I$(src)
obj-$(CONFIG_GFS2_FS) += gfs2.o
-gfs2-y := acl.o bmap.o dir.o eaops.o eattr.o glock.o \
+gfs2-y := acl.o bmap.o dir.o xattr.o glock.o \
glops.o inode.o log.o lops.o main.o meta_io.o \
aops.o dentry.o export.o file.o \
ops_fstype.o ops_inode.o quota.o \
diff --git a/fs/gfs2/acl.c b/fs/gfs2/acl.c
index fa881bd..3fc4e3a 100644
--- a/fs/gfs2/acl.c
+++ b/fs/gfs2/acl.c
@@ -19,8 +19,7 @@
#include "gfs2.h"
#include "incore.h"
#include "acl.h"
-#include "eaops.h"
-#include "eattr.h"
+#include "xattr.h"
#include "glock.h"
#include "inode.h"
#include "meta_io.h"
@@ -31,8 +30,7 @@
#define ACL_DEFAULT 0
int gfs2_acl_validate_set(struct gfs2_inode *ip, int access,
- struct gfs2_ea_request *er,
- int *remove, mode_t *mode)
+ struct gfs2_ea_request *er, int *remove, mode_t *mode)
{
struct posix_acl *acl;
int error;
@@ -83,30 +81,20 @@
return 0;
}
-static int acl_get(struct gfs2_inode *ip, int access, struct posix_acl **acl,
- struct gfs2_ea_location *el, char **data, unsigned int *len)
+static int acl_get(struct gfs2_inode *ip, const char *name,
+ struct posix_acl **acl, struct gfs2_ea_location *el,
+ char **datap, unsigned int *lenp)
{
- struct gfs2_ea_request er;
- struct gfs2_ea_location el_this;
+ char *data;
+ unsigned int len;
int error;
+ el->el_bh = NULL;
+
if (!ip->i_eattr)
return 0;
- memset(&er, 0, sizeof(struct gfs2_ea_request));
- if (access) {
- er.er_name = GFS2_POSIX_ACL_ACCESS;
- er.er_name_len = GFS2_POSIX_ACL_ACCESS_LEN;
- } else {
- er.er_name = GFS2_POSIX_ACL_DEFAULT;
- er.er_name_len = GFS2_POSIX_ACL_DEFAULT_LEN;
- }
- er.er_type = GFS2_EATYPE_SYS;
-
- if (!el)
- el = &el_this;
-
- error = gfs2_ea_find(ip, &er, el);
+ error = gfs2_ea_find(ip, GFS2_EATYPE_SYS, name, el);
if (error)
return error;
if (!el->el_ea)
@@ -114,32 +102,31 @@
if (!GFS2_EA_DATA_LEN(el->el_ea))
goto out;
- er.er_data_len = GFS2_EA_DATA_LEN(el->el_ea);
- er.er_data = kmalloc(er.er_data_len, GFP_NOFS);
+ len = GFS2_EA_DATA_LEN(el->el_ea);
+ data = kmalloc(len, GFP_NOFS);
error = -ENOMEM;
- if (!er.er_data)
+ if (!data)
goto out;
- error = gfs2_ea_get_copy(ip, el, er.er_data);
- if (error)
+ error = gfs2_ea_get_copy(ip, el, data, len);
+ if (error < 0)
goto out_kfree;
+ error = 0;
if (acl) {
- *acl = posix_acl_from_xattr(er.er_data, er.er_data_len);
+ *acl = posix_acl_from_xattr(data, len);
if (IS_ERR(*acl))
error = PTR_ERR(*acl);
}
out_kfree:
- if (error || !data)
- kfree(er.er_data);
- else {
- *data = er.er_data;
- *len = er.er_data_len;
+ if (error || !datap) {
+ kfree(data);
+ } else {
+ *datap = data;
+ *lenp = len;
}
out:
- if (error || el == &el_this)
- brelse(el->el_bh);
return error;
}
@@ -153,10 +140,12 @@
int gfs2_check_acl(struct inode *inode, int mask)
{
+ struct gfs2_ea_location el;
struct posix_acl *acl = NULL;
int error;
- error = acl_get(GFS2_I(inode), ACL_ACCESS, &acl, NULL, NULL, NULL);
+ error = acl_get(GFS2_I(inode), GFS2_POSIX_ACL_ACCESS, &acl, &el, NULL, NULL);
+ brelse(el.el_bh);
if (error)
return error;
@@ -196,10 +185,12 @@
int gfs2_acl_create(struct gfs2_inode *dip, struct gfs2_inode *ip)
{
+ struct gfs2_ea_location el;
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
struct posix_acl *acl = NULL, *clone;
- struct gfs2_ea_request er;
mode_t mode = ip->i_inode.i_mode;
+ char *data = NULL;
+ unsigned int len;
int error;
if (!sdp->sd_args.ar_posix_acl)
@@ -207,11 +198,8 @@
if (S_ISLNK(ip->i_inode.i_mode))
return 0;
- memset(&er, 0, sizeof(struct gfs2_ea_request));
- er.er_type = GFS2_EATYPE_SYS;
-
- error = acl_get(dip, ACL_DEFAULT, &acl, NULL,
- &er.er_data, &er.er_data_len);
+ error = acl_get(dip, GFS2_POSIX_ACL_DEFAULT, &acl, &el, &data, &len);
+ brelse(el.el_bh);
if (error)
return error;
if (!acl) {
@@ -229,9 +217,8 @@
acl = clone;
if (S_ISDIR(ip->i_inode.i_mode)) {
- er.er_name = GFS2_POSIX_ACL_DEFAULT;
- er.er_name_len = GFS2_POSIX_ACL_DEFAULT_LEN;
- error = gfs2_system_eaops.eo_set(ip, &er);
+ error = gfs2_xattr_set(&ip->i_inode, GFS2_EATYPE_SYS,
+ GFS2_POSIX_ACL_DEFAULT, data, len, 0);
if (error)
goto out;
}
@@ -239,21 +226,19 @@
error = posix_acl_create_masq(acl, &mode);
if (error < 0)
goto out;
- if (error > 0) {
- er.er_name = GFS2_POSIX_ACL_ACCESS;
- er.er_name_len = GFS2_POSIX_ACL_ACCESS_LEN;
- posix_acl_to_xattr(acl, er.er_data, er.er_data_len);
- er.er_mode = mode;
- er.er_flags = GFS2_ERF_MODE;
- error = gfs2_system_eaops.eo_set(ip, &er);
- if (error)
- goto out;
- } else
- munge_mode(ip, mode);
+ if (error == 0)
+ goto munge;
+ posix_acl_to_xattr(acl, data, len);
+ error = gfs2_xattr_set(&ip->i_inode, GFS2_EATYPE_SYS,
+ GFS2_POSIX_ACL_ACCESS, data, len, 0);
+ if (error)
+ goto out;
+munge:
+ error = munge_mode(ip, mode);
out:
posix_acl_release(acl);
- kfree(er.er_data);
+ kfree(data);
return error;
}
@@ -265,9 +250,9 @@
unsigned int len;
int error;
- error = acl_get(ip, ACL_ACCESS, &acl, &el, &data, &len);
+ error = acl_get(ip, GFS2_POSIX_ACL_ACCESS, &acl, &el, &data, &len);
if (error)
- return error;
+ goto out_brelse;
if (!acl)
return gfs2_setattr_simple(ip, attr);
@@ -286,8 +271,9 @@
out:
posix_acl_release(acl);
- brelse(el.el_bh);
kfree(data);
+out_brelse:
+ brelse(el.el_bh);
return error;
}
diff --git a/fs/gfs2/dentry.c b/fs/gfs2/dentry.c
index 022c66c..91bedda 100644
--- a/fs/gfs2/dentry.c
+++ b/fs/gfs2/dentry.c
@@ -107,8 +107,26 @@
return 0;
}
+static int gfs2_dentry_delete(struct dentry *dentry)
+{
+ struct gfs2_inode *ginode;
+
+ if (!dentry->d_inode)
+ return 0;
+
+ ginode = GFS2_I(dentry->d_inode);
+ if (!ginode->i_iopen_gh.gh_gl)
+ return 0;
+
+ if (test_bit(GLF_DEMOTE, &ginode->i_iopen_gh.gh_gl->gl_flags))
+ return 1;
+
+ return 0;
+}
+
const struct dentry_operations gfs2_dops = {
.d_revalidate = gfs2_drevalidate,
.d_hash = gfs2_dhash,
+ .d_delete = gfs2_dentry_delete,
};
diff --git a/fs/gfs2/eaops.c b/fs/gfs2/eaops.c
deleted file mode 100644
index dee9b03..0000000
--- a/fs/gfs2/eaops.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/buffer_head.h>
-#include <linux/capability.h>
-#include <linux/xattr.h>
-#include <linux/gfs2_ondisk.h>
-#include <asm/uaccess.h>
-
-#include "gfs2.h"
-#include "incore.h"
-#include "acl.h"
-#include "eaops.h"
-#include "eattr.h"
-#include "util.h"
-
-/**
- * gfs2_ea_name2type - get the type of the ea, and truncate type from the name
- * @namep: ea name, possibly with type appended
- *
- * Returns: GFS2_EATYPE_XXX
- */
-
-unsigned int gfs2_ea_name2type(const char *name, const char **truncated_name)
-{
- unsigned int type;
-
- if (strncmp(name, "system.", 7) == 0) {
- type = GFS2_EATYPE_SYS;
- if (truncated_name)
- *truncated_name = name + sizeof("system.") - 1;
- } else if (strncmp(name, "user.", 5) == 0) {
- type = GFS2_EATYPE_USR;
- if (truncated_name)
- *truncated_name = name + sizeof("user.") - 1;
- } else if (strncmp(name, "security.", 9) == 0) {
- type = GFS2_EATYPE_SECURITY;
- if (truncated_name)
- *truncated_name = name + sizeof("security.") - 1;
- } else {
- type = GFS2_EATYPE_UNUSED;
- if (truncated_name)
- *truncated_name = NULL;
- }
-
- return type;
-}
-
-static int system_eo_get(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- if (!GFS2_ACL_IS_ACCESS(er->er_name, er->er_name_len) &&
- !GFS2_ACL_IS_DEFAULT(er->er_name, er->er_name_len) &&
- !capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (GFS2_SB(&ip->i_inode)->sd_args.ar_posix_acl == 0 &&
- (GFS2_ACL_IS_ACCESS(er->er_name, er->er_name_len) ||
- GFS2_ACL_IS_DEFAULT(er->er_name, er->er_name_len)))
- return -EOPNOTSUPP;
-
- return gfs2_ea_get_i(ip, er);
-}
-
-static int system_eo_set(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- int remove = 0;
- int error;
-
- if (GFS2_ACL_IS_ACCESS(er->er_name, er->er_name_len)) {
- if (!(er->er_flags & GFS2_ERF_MODE)) {
- er->er_mode = ip->i_inode.i_mode;
- er->er_flags |= GFS2_ERF_MODE;
- }
- error = gfs2_acl_validate_set(ip, 1, er,
- &remove, &er->er_mode);
- if (error)
- return error;
- error = gfs2_ea_set_i(ip, er);
- if (error)
- return error;
- if (remove)
- gfs2_ea_remove_i(ip, er);
- return 0;
-
- } else if (GFS2_ACL_IS_DEFAULT(er->er_name, er->er_name_len)) {
- error = gfs2_acl_validate_set(ip, 0, er,
- &remove, NULL);
- if (error)
- return error;
- if (!remove)
- error = gfs2_ea_set_i(ip, er);
- else {
- error = gfs2_ea_remove_i(ip, er);
- if (error == -ENODATA)
- error = 0;
- }
- return error;
- }
-
- return -EPERM;
-}
-
-static int system_eo_remove(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- if (GFS2_ACL_IS_ACCESS(er->er_name, er->er_name_len)) {
- int error = gfs2_acl_validate_remove(ip, 1);
- if (error)
- return error;
-
- } else if (GFS2_ACL_IS_DEFAULT(er->er_name, er->er_name_len)) {
- int error = gfs2_acl_validate_remove(ip, 0);
- if (error)
- return error;
-
- } else
- return -EPERM;
-
- return gfs2_ea_remove_i(ip, er);
-}
-
-static const struct gfs2_eattr_operations gfs2_user_eaops = {
- .eo_get = gfs2_ea_get_i,
- .eo_set = gfs2_ea_set_i,
- .eo_remove = gfs2_ea_remove_i,
- .eo_name = "user",
-};
-
-const struct gfs2_eattr_operations gfs2_system_eaops = {
- .eo_get = system_eo_get,
- .eo_set = system_eo_set,
- .eo_remove = system_eo_remove,
- .eo_name = "system",
-};
-
-static const struct gfs2_eattr_operations gfs2_security_eaops = {
- .eo_get = gfs2_ea_get_i,
- .eo_set = gfs2_ea_set_i,
- .eo_remove = gfs2_ea_remove_i,
- .eo_name = "security",
-};
-
-const struct gfs2_eattr_operations *gfs2_ea_ops[] = {
- NULL,
- &gfs2_user_eaops,
- &gfs2_system_eaops,
- &gfs2_security_eaops,
-};
-
diff --git a/fs/gfs2/eaops.h b/fs/gfs2/eaops.h
deleted file mode 100644
index da2f7fb..0000000
--- a/fs/gfs2/eaops.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#ifndef __EAOPS_DOT_H__
-#define __EAOPS_DOT_H__
-
-struct gfs2_ea_request;
-struct gfs2_inode;
-
-struct gfs2_eattr_operations {
- int (*eo_get) (struct gfs2_inode *ip, struct gfs2_ea_request *er);
- int (*eo_set) (struct gfs2_inode *ip, struct gfs2_ea_request *er);
- int (*eo_remove) (struct gfs2_inode *ip, struct gfs2_ea_request *er);
- char *eo_name;
-};
-
-unsigned int gfs2_ea_name2type(const char *name, const char **truncated_name);
-
-extern const struct gfs2_eattr_operations gfs2_system_eaops;
-
-extern const struct gfs2_eattr_operations *gfs2_ea_ops[];
-
-#endif /* __EAOPS_DOT_H__ */
-
diff --git a/fs/gfs2/eattr.c b/fs/gfs2/eattr.c
deleted file mode 100644
index 07ea952..0000000
--- a/fs/gfs2/eattr.c
+++ /dev/null
@@ -1,1505 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/buffer_head.h>
-#include <linux/xattr.h>
-#include <linux/gfs2_ondisk.h>
-#include <asm/uaccess.h>
-
-#include "gfs2.h"
-#include "incore.h"
-#include "acl.h"
-#include "eaops.h"
-#include "eattr.h"
-#include "glock.h"
-#include "inode.h"
-#include "meta_io.h"
-#include "quota.h"
-#include "rgrp.h"
-#include "trans.h"
-#include "util.h"
-
-/**
- * ea_calc_size - returns the acutal number of bytes the request will take up
- * (not counting any unstuffed data blocks)
- * @sdp:
- * @er:
- * @size:
- *
- * Returns: 1 if the EA should be stuffed
- */
-
-static int ea_calc_size(struct gfs2_sbd *sdp, struct gfs2_ea_request *er,
- unsigned int *size)
-{
- *size = GFS2_EAREQ_SIZE_STUFFED(er);
- if (*size <= sdp->sd_jbsize)
- return 1;
-
- *size = GFS2_EAREQ_SIZE_UNSTUFFED(sdp, er);
-
- return 0;
-}
-
-static int ea_check_size(struct gfs2_sbd *sdp, struct gfs2_ea_request *er)
-{
- unsigned int size;
-
- if (er->er_data_len > GFS2_EA_MAX_DATA_LEN)
- return -ERANGE;
-
- ea_calc_size(sdp, er, &size);
-
- /* This can only happen with 512 byte blocks */
- if (size > sdp->sd_jbsize)
- return -ERANGE;
-
- return 0;
-}
-
-typedef int (*ea_call_t) (struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea,
- struct gfs2_ea_header *prev, void *private);
-
-static int ea_foreach_i(struct gfs2_inode *ip, struct buffer_head *bh,
- ea_call_t ea_call, void *data)
-{
- struct gfs2_ea_header *ea, *prev = NULL;
- int error = 0;
-
- if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), bh, GFS2_METATYPE_EA))
- return -EIO;
-
- for (ea = GFS2_EA_BH2FIRST(bh);; prev = ea, ea = GFS2_EA2NEXT(ea)) {
- if (!GFS2_EA_REC_LEN(ea))
- goto fail;
- if (!(bh->b_data <= (char *)ea && (char *)GFS2_EA2NEXT(ea) <=
- bh->b_data + bh->b_size))
- goto fail;
- if (!GFS2_EATYPE_VALID(ea->ea_type))
- goto fail;
-
- error = ea_call(ip, bh, ea, prev, data);
- if (error)
- return error;
-
- if (GFS2_EA_IS_LAST(ea)) {
- if ((char *)GFS2_EA2NEXT(ea) !=
- bh->b_data + bh->b_size)
- goto fail;
- break;
- }
- }
-
- return error;
-
-fail:
- gfs2_consist_inode(ip);
- return -EIO;
-}
-
-static int ea_foreach(struct gfs2_inode *ip, ea_call_t ea_call, void *data)
-{
- struct buffer_head *bh, *eabh;
- __be64 *eablk, *end;
- int error;
-
- error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT, &bh);
- if (error)
- return error;
-
- if (!(ip->i_diskflags & GFS2_DIF_EA_INDIRECT)) {
- error = ea_foreach_i(ip, bh, ea_call, data);
- goto out;
- }
-
- if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), bh, GFS2_METATYPE_IN)) {
- error = -EIO;
- goto out;
- }
-
- eablk = (__be64 *)(bh->b_data + sizeof(struct gfs2_meta_header));
- end = eablk + GFS2_SB(&ip->i_inode)->sd_inptrs;
-
- for (; eablk < end; eablk++) {
- u64 bn;
-
- if (!*eablk)
- break;
- bn = be64_to_cpu(*eablk);
-
- error = gfs2_meta_read(ip->i_gl, bn, DIO_WAIT, &eabh);
- if (error)
- break;
- error = ea_foreach_i(ip, eabh, ea_call, data);
- brelse(eabh);
- if (error)
- break;
- }
-out:
- brelse(bh);
- return error;
-}
-
-struct ea_find {
- struct gfs2_ea_request *ef_er;
- struct gfs2_ea_location *ef_el;
-};
-
-static int ea_find_i(struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea, struct gfs2_ea_header *prev,
- void *private)
-{
- struct ea_find *ef = private;
- struct gfs2_ea_request *er = ef->ef_er;
-
- if (ea->ea_type == GFS2_EATYPE_UNUSED)
- return 0;
-
- if (ea->ea_type == er->er_type) {
- if (ea->ea_name_len == er->er_name_len &&
- !memcmp(GFS2_EA2NAME(ea), er->er_name, ea->ea_name_len)) {
- struct gfs2_ea_location *el = ef->ef_el;
- get_bh(bh);
- el->el_bh = bh;
- el->el_ea = ea;
- el->el_prev = prev;
- return 1;
- }
- }
-
- return 0;
-}
-
-int gfs2_ea_find(struct gfs2_inode *ip, struct gfs2_ea_request *er,
- struct gfs2_ea_location *el)
-{
- struct ea_find ef;
- int error;
-
- ef.ef_er = er;
- ef.ef_el = el;
-
- memset(el, 0, sizeof(struct gfs2_ea_location));
-
- error = ea_foreach(ip, ea_find_i, &ef);
- if (error > 0)
- return 0;
-
- return error;
-}
-
-/**
- * ea_dealloc_unstuffed -
- * @ip:
- * @bh:
- * @ea:
- * @prev:
- * @private:
- *
- * Take advantage of the fact that all unstuffed blocks are
- * allocated from the same RG. But watch, this may not always
- * be true.
- *
- * Returns: errno
- */
-
-static int ea_dealloc_unstuffed(struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea,
- struct gfs2_ea_header *prev, void *private)
-{
- int *leave = private;
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct gfs2_rgrpd *rgd;
- struct gfs2_holder rg_gh;
- struct buffer_head *dibh;
- __be64 *dataptrs;
- u64 bn = 0;
- u64 bstart = 0;
- unsigned int blen = 0;
- unsigned int blks = 0;
- unsigned int x;
- int error;
-
- if (GFS2_EA_IS_STUFFED(ea))
- return 0;
-
- dataptrs = GFS2_EA2DATAPTRS(ea);
- for (x = 0; x < ea->ea_num_ptrs; x++, dataptrs++) {
- if (*dataptrs) {
- blks++;
- bn = be64_to_cpu(*dataptrs);
- }
- }
- if (!blks)
- return 0;
-
- rgd = gfs2_blk2rgrpd(sdp, bn);
- if (!rgd) {
- gfs2_consist_inode(ip);
- return -EIO;
- }
-
- error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, &rg_gh);
- if (error)
- return error;
-
- error = gfs2_trans_begin(sdp, rgd->rd_length + RES_DINODE +
- RES_EATTR + RES_STATFS + RES_QUOTA, blks);
- if (error)
- goto out_gunlock;
-
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
-
- dataptrs = GFS2_EA2DATAPTRS(ea);
- for (x = 0; x < ea->ea_num_ptrs; x++, dataptrs++) {
- if (!*dataptrs)
- break;
- bn = be64_to_cpu(*dataptrs);
-
- if (bstart + blen == bn)
- blen++;
- else {
- if (bstart)
- gfs2_free_meta(ip, bstart, blen);
- bstart = bn;
- blen = 1;
- }
-
- *dataptrs = 0;
- gfs2_add_inode_blocks(&ip->i_inode, -1);
- }
- if (bstart)
- gfs2_free_meta(ip, bstart, blen);
-
- if (prev && !leave) {
- u32 len;
-
- len = GFS2_EA_REC_LEN(prev) + GFS2_EA_REC_LEN(ea);
- prev->ea_rec_len = cpu_to_be32(len);
-
- if (GFS2_EA_IS_LAST(ea))
- prev->ea_flags |= GFS2_EAFLAG_LAST;
- } else {
- ea->ea_type = GFS2_EATYPE_UNUSED;
- ea->ea_num_ptrs = 0;
- }
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- ip->i_inode.i_ctime = CURRENT_TIME;
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
- gfs2_trans_end(sdp);
-
-out_gunlock:
- gfs2_glock_dq_uninit(&rg_gh);
- return error;
-}
-
-static int ea_remove_unstuffed(struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea,
- struct gfs2_ea_header *prev, int leave)
-{
- struct gfs2_alloc *al;
- int error;
-
- al = gfs2_alloc_get(ip);
- if (!al)
- return -ENOMEM;
-
- error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
- if (error)
- goto out_alloc;
-
- error = gfs2_rindex_hold(GFS2_SB(&ip->i_inode), &al->al_ri_gh);
- if (error)
- goto out_quota;
-
- error = ea_dealloc_unstuffed(ip, bh, ea, prev, (leave) ? &error : NULL);
-
- gfs2_glock_dq_uninit(&al->al_ri_gh);
-
-out_quota:
- gfs2_quota_unhold(ip);
-out_alloc:
- gfs2_alloc_put(ip);
- return error;
-}
-
-struct ea_list {
- struct gfs2_ea_request *ei_er;
- unsigned int ei_size;
-};
-
-static int ea_list_i(struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea, struct gfs2_ea_header *prev,
- void *private)
-{
- struct ea_list *ei = private;
- struct gfs2_ea_request *er = ei->ei_er;
- unsigned int ea_size = gfs2_ea_strlen(ea);
-
- if (ea->ea_type == GFS2_EATYPE_UNUSED)
- return 0;
-
- if (er->er_data_len) {
- char *prefix = NULL;
- unsigned int l = 0;
- char c = 0;
-
- if (ei->ei_size + ea_size > er->er_data_len)
- return -ERANGE;
-
- switch (ea->ea_type) {
- case GFS2_EATYPE_USR:
- prefix = "user.";
- l = 5;
- break;
- case GFS2_EATYPE_SYS:
- prefix = "system.";
- l = 7;
- break;
- case GFS2_EATYPE_SECURITY:
- prefix = "security.";
- l = 9;
- break;
- }
-
- BUG_ON(l == 0);
-
- memcpy(er->er_data + ei->ei_size, prefix, l);
- memcpy(er->er_data + ei->ei_size + l, GFS2_EA2NAME(ea),
- ea->ea_name_len);
- memcpy(er->er_data + ei->ei_size + ea_size - 1, &c, 1);
- }
-
- ei->ei_size += ea_size;
-
- return 0;
-}
-
-/**
- * gfs2_ea_list -
- * @ip:
- * @er:
- *
- * Returns: actual size of data on success, -errno on error
- */
-
-int gfs2_ea_list(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_holder i_gh;
- int error;
-
- if (!er->er_data || !er->er_data_len) {
- er->er_data = NULL;
- er->er_data_len = 0;
- }
-
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- if (error)
- return error;
-
- if (ip->i_eattr) {
- struct ea_list ei = { .ei_er = er, .ei_size = 0 };
-
- error = ea_foreach(ip, ea_list_i, &ei);
- if (!error)
- error = ei.ei_size;
- }
-
- gfs2_glock_dq_uninit(&i_gh);
-
- return error;
-}
-
-/**
- * ea_get_unstuffed - actually copies the unstuffed data into the
- * request buffer
- * @ip: The GFS2 inode
- * @ea: The extended attribute header structure
- * @data: The data to be copied
- *
- * Returns: errno
- */
-
-static int ea_get_unstuffed(struct gfs2_inode *ip, struct gfs2_ea_header *ea,
- char *data)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct buffer_head **bh;
- unsigned int amount = GFS2_EA_DATA_LEN(ea);
- unsigned int nptrs = DIV_ROUND_UP(amount, sdp->sd_jbsize);
- __be64 *dataptrs = GFS2_EA2DATAPTRS(ea);
- unsigned int x;
- int error = 0;
-
- bh = kcalloc(nptrs, sizeof(struct buffer_head *), GFP_NOFS);
- if (!bh)
- return -ENOMEM;
-
- for (x = 0; x < nptrs; x++) {
- error = gfs2_meta_read(ip->i_gl, be64_to_cpu(*dataptrs), 0,
- bh + x);
- if (error) {
- while (x--)
- brelse(bh[x]);
- goto out;
- }
- dataptrs++;
- }
-
- for (x = 0; x < nptrs; x++) {
- error = gfs2_meta_wait(sdp, bh[x]);
- if (error) {
- for (; x < nptrs; x++)
- brelse(bh[x]);
- goto out;
- }
- if (gfs2_metatype_check(sdp, bh[x], GFS2_METATYPE_ED)) {
- for (; x < nptrs; x++)
- brelse(bh[x]);
- error = -EIO;
- goto out;
- }
-
- memcpy(data, bh[x]->b_data + sizeof(struct gfs2_meta_header),
- (sdp->sd_jbsize > amount) ? amount : sdp->sd_jbsize);
-
- amount -= sdp->sd_jbsize;
- data += sdp->sd_jbsize;
-
- brelse(bh[x]);
- }
-
-out:
- kfree(bh);
- return error;
-}
-
-int gfs2_ea_get_copy(struct gfs2_inode *ip, struct gfs2_ea_location *el,
- char *data)
-{
- if (GFS2_EA_IS_STUFFED(el->el_ea)) {
- memcpy(data, GFS2_EA2DATA(el->el_ea), GFS2_EA_DATA_LEN(el->el_ea));
- return 0;
- } else
- return ea_get_unstuffed(ip, el->el_ea, data);
-}
-
-/**
- * gfs2_ea_get_i -
- * @ip: The GFS2 inode
- * @er: The request structure
- *
- * Returns: actual size of data on success, -errno on error
- */
-
-int gfs2_ea_get_i(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_ea_location el;
- int error;
-
- if (!ip->i_eattr)
- return -ENODATA;
-
- error = gfs2_ea_find(ip, er, &el);
- if (error)
- return error;
- if (!el.el_ea)
- return -ENODATA;
-
- if (er->er_data_len) {
- if (GFS2_EA_DATA_LEN(el.el_ea) > er->er_data_len)
- error = -ERANGE;
- else
- error = gfs2_ea_get_copy(ip, &el, er->er_data);
- }
- if (!error)
- error = GFS2_EA_DATA_LEN(el.el_ea);
-
- brelse(el.el_bh);
-
- return error;
-}
-
-/**
- * gfs2_ea_get -
- * @ip: The GFS2 inode
- * @er: The request structure
- *
- * Returns: actual size of data on success, -errno on error
- */
-
-int gfs2_ea_get(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_holder i_gh;
- int error;
-
- if (!er->er_name_len ||
- er->er_name_len > GFS2_EA_MAX_NAME_LEN)
- return -EINVAL;
- if (!er->er_data || !er->er_data_len) {
- er->er_data = NULL;
- er->er_data_len = 0;
- }
-
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- if (error)
- return error;
-
- error = gfs2_ea_ops[er->er_type]->eo_get(ip, er);
-
- gfs2_glock_dq_uninit(&i_gh);
-
- return error;
-}
-
-/**
- * ea_alloc_blk - allocates a new block for extended attributes.
- * @ip: A pointer to the inode that's getting extended attributes
- * @bhp: Pointer to pointer to a struct buffer_head
- *
- * Returns: errno
- */
-
-static int ea_alloc_blk(struct gfs2_inode *ip, struct buffer_head **bhp)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct gfs2_ea_header *ea;
- unsigned int n = 1;
- u64 block;
- int error;
-
- error = gfs2_alloc_block(ip, &block, &n);
- if (error)
- return error;
- gfs2_trans_add_unrevoke(sdp, block, 1);
- *bhp = gfs2_meta_new(ip->i_gl, block);
- gfs2_trans_add_bh(ip->i_gl, *bhp, 1);
- gfs2_metatype_set(*bhp, GFS2_METATYPE_EA, GFS2_FORMAT_EA);
- gfs2_buffer_clear_tail(*bhp, sizeof(struct gfs2_meta_header));
-
- ea = GFS2_EA_BH2FIRST(*bhp);
- ea->ea_rec_len = cpu_to_be32(sdp->sd_jbsize);
- ea->ea_type = GFS2_EATYPE_UNUSED;
- ea->ea_flags = GFS2_EAFLAG_LAST;
- ea->ea_num_ptrs = 0;
-
- gfs2_add_inode_blocks(&ip->i_inode, 1);
-
- return 0;
-}
-
-/**
- * ea_write - writes the request info to an ea, creating new blocks if
- * necessary
- * @ip: inode that is being modified
- * @ea: the location of the new ea in a block
- * @er: the write request
- *
- * Note: does not update ea_rec_len or the GFS2_EAFLAG_LAST bin of ea_flags
- *
- * returns : errno
- */
-
-static int ea_write(struct gfs2_inode *ip, struct gfs2_ea_header *ea,
- struct gfs2_ea_request *er)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- int error;
-
- ea->ea_data_len = cpu_to_be32(er->er_data_len);
- ea->ea_name_len = er->er_name_len;
- ea->ea_type = er->er_type;
- ea->__pad = 0;
-
- memcpy(GFS2_EA2NAME(ea), er->er_name, er->er_name_len);
-
- if (GFS2_EAREQ_SIZE_STUFFED(er) <= sdp->sd_jbsize) {
- ea->ea_num_ptrs = 0;
- memcpy(GFS2_EA2DATA(ea), er->er_data, er->er_data_len);
- } else {
- __be64 *dataptr = GFS2_EA2DATAPTRS(ea);
- const char *data = er->er_data;
- unsigned int data_len = er->er_data_len;
- unsigned int copy;
- unsigned int x;
-
- ea->ea_num_ptrs = DIV_ROUND_UP(er->er_data_len, sdp->sd_jbsize);
- for (x = 0; x < ea->ea_num_ptrs; x++) {
- struct buffer_head *bh;
- u64 block;
- int mh_size = sizeof(struct gfs2_meta_header);
- unsigned int n = 1;
-
- error = gfs2_alloc_block(ip, &block, &n);
- if (error)
- return error;
- gfs2_trans_add_unrevoke(sdp, block, 1);
- bh = gfs2_meta_new(ip->i_gl, block);
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
- gfs2_metatype_set(bh, GFS2_METATYPE_ED, GFS2_FORMAT_ED);
-
- gfs2_add_inode_blocks(&ip->i_inode, 1);
-
- copy = data_len > sdp->sd_jbsize ? sdp->sd_jbsize :
- data_len;
- memcpy(bh->b_data + mh_size, data, copy);
- if (copy < sdp->sd_jbsize)
- memset(bh->b_data + mh_size + copy, 0,
- sdp->sd_jbsize - copy);
-
- *dataptr++ = cpu_to_be64(bh->b_blocknr);
- data += copy;
- data_len -= copy;
-
- brelse(bh);
- }
-
- gfs2_assert_withdraw(sdp, !data_len);
- }
-
- return 0;
-}
-
-typedef int (*ea_skeleton_call_t) (struct gfs2_inode *ip,
- struct gfs2_ea_request *er, void *private);
-
-static int ea_alloc_skeleton(struct gfs2_inode *ip, struct gfs2_ea_request *er,
- unsigned int blks,
- ea_skeleton_call_t skeleton_call, void *private)
-{
- struct gfs2_alloc *al;
- struct buffer_head *dibh;
- int error;
-
- al = gfs2_alloc_get(ip);
- if (!al)
- return -ENOMEM;
-
- error = gfs2_quota_lock_check(ip);
- if (error)
- goto out;
-
- al->al_requested = blks;
-
- error = gfs2_inplace_reserve(ip);
- if (error)
- goto out_gunlock_q;
-
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode),
- blks + al->al_rgd->rd_length +
- RES_DINODE + RES_STATFS + RES_QUOTA, 0);
- if (error)
- goto out_ipres;
-
- error = skeleton_call(ip, er, private);
- if (error)
- goto out_end_trans;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- if (er->er_flags & GFS2_ERF_MODE) {
- gfs2_assert_withdraw(GFS2_SB(&ip->i_inode),
- (ip->i_inode.i_mode & S_IFMT) ==
- (er->er_mode & S_IFMT));
- ip->i_inode.i_mode = er->er_mode;
- }
- ip->i_inode.i_ctime = CURRENT_TIME;
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
-out_end_trans:
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
-out_ipres:
- gfs2_inplace_release(ip);
-out_gunlock_q:
- gfs2_quota_unlock(ip);
-out:
- gfs2_alloc_put(ip);
- return error;
-}
-
-static int ea_init_i(struct gfs2_inode *ip, struct gfs2_ea_request *er,
- void *private)
-{
- struct buffer_head *bh;
- int error;
-
- error = ea_alloc_blk(ip, &bh);
- if (error)
- return error;
-
- ip->i_eattr = bh->b_blocknr;
- error = ea_write(ip, GFS2_EA_BH2FIRST(bh), er);
-
- brelse(bh);
-
- return error;
-}
-
-/**
- * ea_init - initializes a new eattr block
- * @ip:
- * @er:
- *
- * Returns: errno
- */
-
-static int ea_init(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- unsigned int jbsize = GFS2_SB(&ip->i_inode)->sd_jbsize;
- unsigned int blks = 1;
-
- if (GFS2_EAREQ_SIZE_STUFFED(er) > jbsize)
- blks += DIV_ROUND_UP(er->er_data_len, jbsize);
-
- return ea_alloc_skeleton(ip, er, blks, ea_init_i, NULL);
-}
-
-static struct gfs2_ea_header *ea_split_ea(struct gfs2_ea_header *ea)
-{
- u32 ea_size = GFS2_EA_SIZE(ea);
- struct gfs2_ea_header *new = (struct gfs2_ea_header *)((char *)ea +
- ea_size);
- u32 new_size = GFS2_EA_REC_LEN(ea) - ea_size;
- int last = ea->ea_flags & GFS2_EAFLAG_LAST;
-
- ea->ea_rec_len = cpu_to_be32(ea_size);
- ea->ea_flags ^= last;
-
- new->ea_rec_len = cpu_to_be32(new_size);
- new->ea_flags = last;
-
- return new;
-}
-
-static void ea_set_remove_stuffed(struct gfs2_inode *ip,
- struct gfs2_ea_location *el)
-{
- struct gfs2_ea_header *ea = el->el_ea;
- struct gfs2_ea_header *prev = el->el_prev;
- u32 len;
-
- gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
-
- if (!prev || !GFS2_EA_IS_STUFFED(ea)) {
- ea->ea_type = GFS2_EATYPE_UNUSED;
- return;
- } else if (GFS2_EA2NEXT(prev) != ea) {
- prev = GFS2_EA2NEXT(prev);
- gfs2_assert_withdraw(GFS2_SB(&ip->i_inode), GFS2_EA2NEXT(prev) == ea);
- }
-
- len = GFS2_EA_REC_LEN(prev) + GFS2_EA_REC_LEN(ea);
- prev->ea_rec_len = cpu_to_be32(len);
-
- if (GFS2_EA_IS_LAST(ea))
- prev->ea_flags |= GFS2_EAFLAG_LAST;
-}
-
-struct ea_set {
- int ea_split;
-
- struct gfs2_ea_request *es_er;
- struct gfs2_ea_location *es_el;
-
- struct buffer_head *es_bh;
- struct gfs2_ea_header *es_ea;
-};
-
-static int ea_set_simple_noalloc(struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea, struct ea_set *es)
-{
- struct gfs2_ea_request *er = es->es_er;
- struct buffer_head *dibh;
- int error;
-
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + 2 * RES_EATTR, 0);
- if (error)
- return error;
-
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
-
- if (es->ea_split)
- ea = ea_split_ea(ea);
-
- ea_write(ip, ea, er);
-
- if (es->es_el)
- ea_set_remove_stuffed(ip, es->es_el);
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (error)
- goto out;
-
- if (er->er_flags & GFS2_ERF_MODE) {
- gfs2_assert_withdraw(GFS2_SB(&ip->i_inode),
- (ip->i_inode.i_mode & S_IFMT) == (er->er_mode & S_IFMT));
- ip->i_inode.i_mode = er->er_mode;
- }
- ip->i_inode.i_ctime = CURRENT_TIME;
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
-out:
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
- return error;
-}
-
-static int ea_set_simple_alloc(struct gfs2_inode *ip,
- struct gfs2_ea_request *er, void *private)
-{
- struct ea_set *es = private;
- struct gfs2_ea_header *ea = es->es_ea;
- int error;
-
- gfs2_trans_add_bh(ip->i_gl, es->es_bh, 1);
-
- if (es->ea_split)
- ea = ea_split_ea(ea);
-
- error = ea_write(ip, ea, er);
- if (error)
- return error;
-
- if (es->es_el)
- ea_set_remove_stuffed(ip, es->es_el);
-
- return 0;
-}
-
-static int ea_set_simple(struct gfs2_inode *ip, struct buffer_head *bh,
- struct gfs2_ea_header *ea, struct gfs2_ea_header *prev,
- void *private)
-{
- struct ea_set *es = private;
- unsigned int size;
- int stuffed;
- int error;
-
- stuffed = ea_calc_size(GFS2_SB(&ip->i_inode), es->es_er, &size);
-
- if (ea->ea_type == GFS2_EATYPE_UNUSED) {
- if (GFS2_EA_REC_LEN(ea) < size)
- return 0;
- if (!GFS2_EA_IS_STUFFED(ea)) {
- error = ea_remove_unstuffed(ip, bh, ea, prev, 1);
- if (error)
- return error;
- }
- es->ea_split = 0;
- } else if (GFS2_EA_REC_LEN(ea) - GFS2_EA_SIZE(ea) >= size)
- es->ea_split = 1;
- else
- return 0;
-
- if (stuffed) {
- error = ea_set_simple_noalloc(ip, bh, ea, es);
- if (error)
- return error;
- } else {
- unsigned int blks;
-
- es->es_bh = bh;
- es->es_ea = ea;
- blks = 2 + DIV_ROUND_UP(es->es_er->er_data_len,
- GFS2_SB(&ip->i_inode)->sd_jbsize);
-
- error = ea_alloc_skeleton(ip, es->es_er, blks,
- ea_set_simple_alloc, es);
- if (error)
- return error;
- }
-
- return 1;
-}
-
-static int ea_set_block(struct gfs2_inode *ip, struct gfs2_ea_request *er,
- void *private)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct buffer_head *indbh, *newbh;
- __be64 *eablk;
- int error;
- int mh_size = sizeof(struct gfs2_meta_header);
-
- if (ip->i_diskflags & GFS2_DIF_EA_INDIRECT) {
- __be64 *end;
-
- error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT,
- &indbh);
- if (error)
- return error;
-
- if (gfs2_metatype_check(sdp, indbh, GFS2_METATYPE_IN)) {
- error = -EIO;
- goto out;
- }
-
- eablk = (__be64 *)(indbh->b_data + mh_size);
- end = eablk + sdp->sd_inptrs;
-
- for (; eablk < end; eablk++)
- if (!*eablk)
- break;
-
- if (eablk == end) {
- error = -ENOSPC;
- goto out;
- }
-
- gfs2_trans_add_bh(ip->i_gl, indbh, 1);
- } else {
- u64 blk;
- unsigned int n = 1;
- error = gfs2_alloc_block(ip, &blk, &n);
- if (error)
- return error;
- gfs2_trans_add_unrevoke(sdp, blk, 1);
- indbh = gfs2_meta_new(ip->i_gl, blk);
- gfs2_trans_add_bh(ip->i_gl, indbh, 1);
- gfs2_metatype_set(indbh, GFS2_METATYPE_IN, GFS2_FORMAT_IN);
- gfs2_buffer_clear_tail(indbh, mh_size);
-
- eablk = (__be64 *)(indbh->b_data + mh_size);
- *eablk = cpu_to_be64(ip->i_eattr);
- ip->i_eattr = blk;
- ip->i_diskflags |= GFS2_DIF_EA_INDIRECT;
- gfs2_add_inode_blocks(&ip->i_inode, 1);
-
- eablk++;
- }
-
- error = ea_alloc_blk(ip, &newbh);
- if (error)
- goto out;
-
- *eablk = cpu_to_be64((u64)newbh->b_blocknr);
- error = ea_write(ip, GFS2_EA_BH2FIRST(newbh), er);
- brelse(newbh);
- if (error)
- goto out;
-
- if (private)
- ea_set_remove_stuffed(ip, private);
-
-out:
- brelse(indbh);
- return error;
-}
-
-static int ea_set_i(struct gfs2_inode *ip, struct gfs2_ea_request *er,
- struct gfs2_ea_location *el)
-{
- struct ea_set es;
- unsigned int blks = 2;
- int error;
-
- memset(&es, 0, sizeof(struct ea_set));
- es.es_er = er;
- es.es_el = el;
-
- error = ea_foreach(ip, ea_set_simple, &es);
- if (error > 0)
- return 0;
- if (error)
- return error;
-
- if (!(ip->i_diskflags & GFS2_DIF_EA_INDIRECT))
- blks++;
- if (GFS2_EAREQ_SIZE_STUFFED(er) > GFS2_SB(&ip->i_inode)->sd_jbsize)
- blks += DIV_ROUND_UP(er->er_data_len, GFS2_SB(&ip->i_inode)->sd_jbsize);
-
- return ea_alloc_skeleton(ip, er, blks, ea_set_block, el);
-}
-
-static int ea_set_remove_unstuffed(struct gfs2_inode *ip,
- struct gfs2_ea_location *el)
-{
- if (el->el_prev && GFS2_EA2NEXT(el->el_prev) != el->el_ea) {
- el->el_prev = GFS2_EA2NEXT(el->el_prev);
- gfs2_assert_withdraw(GFS2_SB(&ip->i_inode),
- GFS2_EA2NEXT(el->el_prev) == el->el_ea);
- }
-
- return ea_remove_unstuffed(ip, el->el_bh, el->el_ea, el->el_prev,0);
-}
-
-int gfs2_ea_set_i(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_ea_location el;
- int error;
-
- if (!ip->i_eattr) {
- if (er->er_flags & XATTR_REPLACE)
- return -ENODATA;
- return ea_init(ip, er);
- }
-
- error = gfs2_ea_find(ip, er, &el);
- if (error)
- return error;
-
- if (el.el_ea) {
- if (ip->i_diskflags & GFS2_DIF_APPENDONLY) {
- brelse(el.el_bh);
- return -EPERM;
- }
-
- error = -EEXIST;
- if (!(er->er_flags & XATTR_CREATE)) {
- int unstuffed = !GFS2_EA_IS_STUFFED(el.el_ea);
- error = ea_set_i(ip, er, &el);
- if (!error && unstuffed)
- ea_set_remove_unstuffed(ip, &el);
- }
-
- brelse(el.el_bh);
- } else {
- error = -ENODATA;
- if (!(er->er_flags & XATTR_REPLACE))
- error = ea_set_i(ip, er, NULL);
- }
-
- return error;
-}
-
-int gfs2_ea_set(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_holder i_gh;
- int error;
-
- if (!er->er_name_len || er->er_name_len > GFS2_EA_MAX_NAME_LEN)
- return -EINVAL;
- if (!er->er_data || !er->er_data_len) {
- er->er_data = NULL;
- er->er_data_len = 0;
- }
- error = ea_check_size(GFS2_SB(&ip->i_inode), er);
- if (error)
- return error;
-
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
- if (error)
- return error;
-
- if (IS_IMMUTABLE(&ip->i_inode))
- error = -EPERM;
- else
- error = gfs2_ea_ops[er->er_type]->eo_set(ip, er);
-
- gfs2_glock_dq_uninit(&i_gh);
-
- return error;
-}
-
-static int ea_remove_stuffed(struct gfs2_inode *ip, struct gfs2_ea_location *el)
-{
- struct gfs2_ea_header *ea = el->el_ea;
- struct gfs2_ea_header *prev = el->el_prev;
- struct buffer_head *dibh;
- int error;
-
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
- if (error)
- return error;
-
- gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
-
- if (prev) {
- u32 len;
-
- len = GFS2_EA_REC_LEN(prev) + GFS2_EA_REC_LEN(ea);
- prev->ea_rec_len = cpu_to_be32(len);
-
- if (GFS2_EA_IS_LAST(ea))
- prev->ea_flags |= GFS2_EAFLAG_LAST;
- } else
- ea->ea_type = GFS2_EATYPE_UNUSED;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- ip->i_inode.i_ctime = CURRENT_TIME;
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
-
- return error;
-}
-
-int gfs2_ea_remove_i(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_ea_location el;
- int error;
-
- if (!ip->i_eattr)
- return -ENODATA;
-
- error = gfs2_ea_find(ip, er, &el);
- if (error)
- return error;
- if (!el.el_ea)
- return -ENODATA;
-
- if (GFS2_EA_IS_STUFFED(el.el_ea))
- error = ea_remove_stuffed(ip, &el);
- else
- error = ea_remove_unstuffed(ip, el.el_bh, el.el_ea, el.el_prev,
- 0);
-
- brelse(el.el_bh);
-
- return error;
-}
-
-/**
- * gfs2_ea_remove - sets (or creates or replaces) an extended attribute
- * @ip: pointer to the inode of the target file
- * @er: request information
- *
- * Returns: errno
- */
-
-int gfs2_ea_remove(struct gfs2_inode *ip, struct gfs2_ea_request *er)
-{
- struct gfs2_holder i_gh;
- int error;
-
- if (!er->er_name_len || er->er_name_len > GFS2_EA_MAX_NAME_LEN)
- return -EINVAL;
-
- error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
- if (error)
- return error;
-
- if (IS_IMMUTABLE(&ip->i_inode) || IS_APPEND(&ip->i_inode))
- error = -EPERM;
- else
- error = gfs2_ea_ops[er->er_type]->eo_remove(ip, er);
-
- gfs2_glock_dq_uninit(&i_gh);
-
- return error;
-}
-
-static int ea_acl_chmod_unstuffed(struct gfs2_inode *ip,
- struct gfs2_ea_header *ea, char *data)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct buffer_head **bh;
- unsigned int amount = GFS2_EA_DATA_LEN(ea);
- unsigned int nptrs = DIV_ROUND_UP(amount, sdp->sd_jbsize);
- __be64 *dataptrs = GFS2_EA2DATAPTRS(ea);
- unsigned int x;
- int error;
-
- bh = kcalloc(nptrs, sizeof(struct buffer_head *), GFP_NOFS);
- if (!bh)
- return -ENOMEM;
-
- error = gfs2_trans_begin(sdp, nptrs + RES_DINODE, 0);
- if (error)
- goto out;
-
- for (x = 0; x < nptrs; x++) {
- error = gfs2_meta_read(ip->i_gl, be64_to_cpu(*dataptrs), 0,
- bh + x);
- if (error) {
- while (x--)
- brelse(bh[x]);
- goto fail;
- }
- dataptrs++;
- }
-
- for (x = 0; x < nptrs; x++) {
- error = gfs2_meta_wait(sdp, bh[x]);
- if (error) {
- for (; x < nptrs; x++)
- brelse(bh[x]);
- goto fail;
- }
- if (gfs2_metatype_check(sdp, bh[x], GFS2_METATYPE_ED)) {
- for (; x < nptrs; x++)
- brelse(bh[x]);
- error = -EIO;
- goto fail;
- }
-
- gfs2_trans_add_bh(ip->i_gl, bh[x], 1);
-
- memcpy(bh[x]->b_data + sizeof(struct gfs2_meta_header), data,
- (sdp->sd_jbsize > amount) ? amount : sdp->sd_jbsize);
-
- amount -= sdp->sd_jbsize;
- data += sdp->sd_jbsize;
-
- brelse(bh[x]);
- }
-
-out:
- kfree(bh);
- return error;
-
-fail:
- gfs2_trans_end(sdp);
- kfree(bh);
- return error;
-}
-
-int gfs2_ea_acl_chmod(struct gfs2_inode *ip, struct gfs2_ea_location *el,
- struct iattr *attr, char *data)
-{
- struct buffer_head *dibh;
- int error;
-
- if (GFS2_EA_IS_STUFFED(el->el_ea)) {
- error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
- if (error)
- return error;
-
- gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
- memcpy(GFS2_EA2DATA(el->el_ea), data,
- GFS2_EA_DATA_LEN(el->el_ea));
- } else
- error = ea_acl_chmod_unstuffed(ip, el->el_ea, data);
-
- if (error)
- return error;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- error = inode_setattr(&ip->i_inode, attr);
- gfs2_assert_warn(GFS2_SB(&ip->i_inode), !error);
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
- gfs2_trans_end(GFS2_SB(&ip->i_inode));
-
- return error;
-}
-
-static int ea_dealloc_indirect(struct gfs2_inode *ip)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct gfs2_rgrp_list rlist;
- struct buffer_head *indbh, *dibh;
- __be64 *eablk, *end;
- unsigned int rg_blocks = 0;
- u64 bstart = 0;
- unsigned int blen = 0;
- unsigned int blks = 0;
- unsigned int x;
- int error;
-
- memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
-
- error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT, &indbh);
- if (error)
- return error;
-
- if (gfs2_metatype_check(sdp, indbh, GFS2_METATYPE_IN)) {
- error = -EIO;
- goto out;
- }
-
- eablk = (__be64 *)(indbh->b_data + sizeof(struct gfs2_meta_header));
- end = eablk + sdp->sd_inptrs;
-
- for (; eablk < end; eablk++) {
- u64 bn;
-
- if (!*eablk)
- break;
- bn = be64_to_cpu(*eablk);
-
- if (bstart + blen == bn)
- blen++;
- else {
- if (bstart)
- gfs2_rlist_add(sdp, &rlist, bstart);
- bstart = bn;
- blen = 1;
- }
- blks++;
- }
- if (bstart)
- gfs2_rlist_add(sdp, &rlist, bstart);
- else
- goto out;
-
- gfs2_rlist_alloc(&rlist, LM_ST_EXCLUSIVE);
-
- for (x = 0; x < rlist.rl_rgrps; x++) {
- struct gfs2_rgrpd *rgd;
- rgd = rlist.rl_ghs[x].gh_gl->gl_object;
- rg_blocks += rgd->rd_length;
- }
-
- error = gfs2_glock_nq_m(rlist.rl_rgrps, rlist.rl_ghs);
- if (error)
- goto out_rlist_free;
-
- error = gfs2_trans_begin(sdp, rg_blocks + RES_DINODE + RES_INDIRECT +
- RES_STATFS + RES_QUOTA, blks);
- if (error)
- goto out_gunlock;
-
- gfs2_trans_add_bh(ip->i_gl, indbh, 1);
-
- eablk = (__be64 *)(indbh->b_data + sizeof(struct gfs2_meta_header));
- bstart = 0;
- blen = 0;
-
- for (; eablk < end; eablk++) {
- u64 bn;
-
- if (!*eablk)
- break;
- bn = be64_to_cpu(*eablk);
-
- if (bstart + blen == bn)
- blen++;
- else {
- if (bstart)
- gfs2_free_meta(ip, bstart, blen);
- bstart = bn;
- blen = 1;
- }
-
- *eablk = 0;
- gfs2_add_inode_blocks(&ip->i_inode, -1);
- }
- if (bstart)
- gfs2_free_meta(ip, bstart, blen);
-
- ip->i_diskflags &= ~GFS2_DIF_EA_INDIRECT;
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
- gfs2_trans_end(sdp);
-
-out_gunlock:
- gfs2_glock_dq_m(rlist.rl_rgrps, rlist.rl_ghs);
-out_rlist_free:
- gfs2_rlist_free(&rlist);
-out:
- brelse(indbh);
- return error;
-}
-
-static int ea_dealloc_block(struct gfs2_inode *ip)
-{
- struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct gfs2_alloc *al = ip->i_alloc;
- struct gfs2_rgrpd *rgd;
- struct buffer_head *dibh;
- int error;
-
- rgd = gfs2_blk2rgrpd(sdp, ip->i_eattr);
- if (!rgd) {
- gfs2_consist_inode(ip);
- return -EIO;
- }
-
- error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
- &al->al_rgd_gh);
- if (error)
- return error;
-
- error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_DINODE + RES_STATFS +
- RES_QUOTA, 1);
- if (error)
- goto out_gunlock;
-
- gfs2_free_meta(ip, ip->i_eattr, 1);
-
- ip->i_eattr = 0;
- gfs2_add_inode_blocks(&ip->i_inode, -1);
-
- error = gfs2_meta_inode_buffer(ip, &dibh);
- if (!error) {
- gfs2_trans_add_bh(ip->i_gl, dibh, 1);
- gfs2_dinode_out(ip, dibh->b_data);
- brelse(dibh);
- }
-
- gfs2_trans_end(sdp);
-
-out_gunlock:
- gfs2_glock_dq_uninit(&al->al_rgd_gh);
- return error;
-}
-
-/**
- * gfs2_ea_dealloc - deallocate the extended attribute fork
- * @ip: the inode
- *
- * Returns: errno
- */
-
-int gfs2_ea_dealloc(struct gfs2_inode *ip)
-{
- struct gfs2_alloc *al;
- int error;
-
- al = gfs2_alloc_get(ip);
- if (!al)
- return -ENOMEM;
-
- error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
- if (error)
- goto out_alloc;
-
- error = gfs2_rindex_hold(GFS2_SB(&ip->i_inode), &al->al_ri_gh);
- if (error)
- goto out_quota;
-
- error = ea_foreach(ip, ea_dealloc_unstuffed, NULL);
- if (error)
- goto out_rindex;
-
- if (ip->i_diskflags & GFS2_DIF_EA_INDIRECT) {
- error = ea_dealloc_indirect(ip);
- if (error)
- goto out_rindex;
- }
-
- error = ea_dealloc_block(ip);
-
-out_rindex:
- gfs2_glock_dq_uninit(&al->al_ri_gh);
-out_quota:
- gfs2_quota_unhold(ip);
-out_alloc:
- gfs2_alloc_put(ip);
- return error;
-}
-
diff --git a/fs/gfs2/eattr.h b/fs/gfs2/eattr.h
deleted file mode 100644
index c82dbe0..0000000
--- a/fs/gfs2/eattr.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License version 2.
- */
-
-#ifndef __EATTR_DOT_H__
-#define __EATTR_DOT_H__
-
-struct gfs2_inode;
-struct iattr;
-
-#define GFS2_EA_REC_LEN(ea) be32_to_cpu((ea)->ea_rec_len)
-#define GFS2_EA_DATA_LEN(ea) be32_to_cpu((ea)->ea_data_len)
-
-#define GFS2_EA_SIZE(ea) \
-ALIGN(sizeof(struct gfs2_ea_header) + (ea)->ea_name_len + \
- ((GFS2_EA_IS_STUFFED(ea)) ? GFS2_EA_DATA_LEN(ea) : \
- (sizeof(__be64) * (ea)->ea_num_ptrs)), 8)
-
-#define GFS2_EA_IS_STUFFED(ea) (!(ea)->ea_num_ptrs)
-#define GFS2_EA_IS_LAST(ea) ((ea)->ea_flags & GFS2_EAFLAG_LAST)
-
-#define GFS2_EAREQ_SIZE_STUFFED(er) \
-ALIGN(sizeof(struct gfs2_ea_header) + (er)->er_name_len + (er)->er_data_len, 8)
-
-#define GFS2_EAREQ_SIZE_UNSTUFFED(sdp, er) \
-ALIGN(sizeof(struct gfs2_ea_header) + (er)->er_name_len + \
- sizeof(__be64) * DIV_ROUND_UP((er)->er_data_len, (sdp)->sd_jbsize), 8)
-
-#define GFS2_EA2NAME(ea) ((char *)((struct gfs2_ea_header *)(ea) + 1))
-#define GFS2_EA2DATA(ea) (GFS2_EA2NAME(ea) + (ea)->ea_name_len)
-
-#define GFS2_EA2DATAPTRS(ea) \
-((__be64 *)(GFS2_EA2NAME(ea) + ALIGN((ea)->ea_name_len, 8)))
-
-#define GFS2_EA2NEXT(ea) \
-((struct gfs2_ea_header *)((char *)(ea) + GFS2_EA_REC_LEN(ea)))
-
-#define GFS2_EA_BH2FIRST(bh) \
-((struct gfs2_ea_header *)((bh)->b_data + sizeof(struct gfs2_meta_header)))
-
-#define GFS2_ERF_MODE 0x80000000
-
-struct gfs2_ea_request {
- const char *er_name;
- char *er_data;
- unsigned int er_name_len;
- unsigned int er_data_len;
- unsigned int er_type; /* GFS2_EATYPE_... */
- int er_flags;
- mode_t er_mode;
-};
-
-struct gfs2_ea_location {
- struct buffer_head *el_bh;
- struct gfs2_ea_header *el_ea;
- struct gfs2_ea_header *el_prev;
-};
-
-int gfs2_ea_get_i(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-int gfs2_ea_set_i(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-int gfs2_ea_remove_i(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-
-int gfs2_ea_list(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-int gfs2_ea_get(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-int gfs2_ea_set(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-int gfs2_ea_remove(struct gfs2_inode *ip, struct gfs2_ea_request *er);
-
-int gfs2_ea_dealloc(struct gfs2_inode *ip);
-
-/* Exported to acl.c */
-
-int gfs2_ea_find(struct gfs2_inode *ip,
- struct gfs2_ea_request *er,
- struct gfs2_ea_location *el);
-int gfs2_ea_get_copy(struct gfs2_inode *ip,
- struct gfs2_ea_location *el,
- char *data);
-int gfs2_ea_acl_chmod(struct gfs2_inode *ip, struct gfs2_ea_location *el,
- struct iattr *attr, char *data);
-
-static inline unsigned int gfs2_ea_strlen(struct gfs2_ea_header *ea)
-{
- switch (ea->ea_type) {
- case GFS2_EATYPE_USR:
- return 5 + ea->ea_name_len + 1;
- case GFS2_EATYPE_SYS:
- return 7 + ea->ea_name_len + 1;
- case GFS2_EATYPE_SECURITY:
- return 9 + ea->ea_name_len + 1;
- default:
- return 0;
- }
-}
-
-#endif /* __EATTR_DOT_H__ */
diff --git a/fs/gfs2/export.c b/fs/gfs2/export.c
index 9200ef2..d15876e 100644
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -143,17 +143,14 @@
}
static struct dentry *gfs2_get_dentry(struct super_block *sb,
- struct gfs2_inum_host *inum)
+ struct gfs2_inum_host *inum)
{
struct gfs2_sbd *sdp = sb->s_fs_info;
- struct gfs2_holder i_gh, ri_gh, rgd_gh;
- struct gfs2_rgrpd *rgd;
+ struct gfs2_holder i_gh;
struct inode *inode;
struct dentry *dentry;
int error;
- /* System files? */
-
inode = gfs2_ilookup(sb, inum->no_addr);
if (inode) {
if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
@@ -168,29 +165,11 @@
if (error)
return ERR_PTR(error);
- error = gfs2_rindex_hold(sdp, &ri_gh);
+ error = gfs2_check_blk_type(sdp, inum->no_addr, GFS2_BLKST_DINODE);
if (error)
goto fail;
- error = -EINVAL;
- rgd = gfs2_blk2rgrpd(sdp, inum->no_addr);
- if (!rgd)
- goto fail_rindex;
-
- error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_SHARED, 0, &rgd_gh);
- if (error)
- goto fail_rindex;
-
- error = -ESTALE;
- if (gfs2_get_block_type(rgd, inum->no_addr) != GFS2_BLKST_DINODE)
- goto fail_rgd;
-
- gfs2_glock_dq_uninit(&rgd_gh);
- gfs2_glock_dq_uninit(&ri_gh);
-
- inode = gfs2_inode_lookup(sb, DT_UNKNOWN,
- inum->no_addr,
- 0, 0);
+ inode = gfs2_inode_lookup(sb, DT_UNKNOWN, inum->no_addr, 0, 0);
if (IS_ERR(inode)) {
error = PTR_ERR(inode);
goto fail;
@@ -224,13 +203,6 @@
if (!IS_ERR(dentry))
dentry->d_op = &gfs2_dops;
return dentry;
-
-fail_rgd:
- gfs2_glock_dq_uninit(&rgd_gh);
-
-fail_rindex:
- gfs2_glock_dq_uninit(&ri_gh);
-
fail:
gfs2_glock_dq_uninit(&i_gh);
return ERR_PTR(error);
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 73318a3..166f38f 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -38,7 +38,6 @@
#include "rgrp.h"
#include "trans.h"
#include "util.h"
-#include "eaops.h"
/**
* gfs2_llseek - seek to a location in a file
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 61801ad..6edb423 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -406,6 +406,12 @@
#define GFS2_DATA_WRITEBACK 1
#define GFS2_DATA_ORDERED 2
+#define GFS2_ERRORS_DEFAULT GFS2_ERRORS_WITHDRAW
+#define GFS2_ERRORS_WITHDRAW 0
+#define GFS2_ERRORS_CONTINUE 1 /* place holder for future feature */
+#define GFS2_ERRORS_RO 2 /* place holder for future feature */
+#define GFS2_ERRORS_PANIC 3
+
struct gfs2_args {
char ar_lockproto[GFS2_LOCKNAME_LEN]; /* Name of the Lock Protocol */
char ar_locktable[GFS2_LOCKNAME_LEN]; /* Name of the Lock Table */
@@ -422,6 +428,7 @@
unsigned int ar_data:2; /* ordered/writeback */
unsigned int ar_meta:1; /* mount metafs */
unsigned int ar_discard:1; /* discard requests */
+ unsigned int ar_errors:2; /* errors=withdraw | panic */
int ar_commit; /* Commit interval */
};
@@ -489,7 +496,6 @@
*/
struct lm_lockstruct {
- u32 ls_id;
unsigned int ls_jid;
unsigned int ls_first;
unsigned int ls_first_done;
@@ -541,18 +547,12 @@
struct dentry *sd_root_dir;
struct inode *sd_jindex;
- struct inode *sd_inum_inode;
struct inode *sd_statfs_inode;
- struct inode *sd_ir_inode;
struct inode *sd_sc_inode;
struct inode *sd_qc_inode;
struct inode *sd_rindex;
struct inode *sd_quota_inode;
- /* Inum stuff */
-
- struct mutex sd_inum_mutex;
-
/* StatFS stuff */
spinlock_t sd_statfs_spin;
@@ -580,7 +580,6 @@
struct gfs2_holder sd_journal_gh;
struct gfs2_holder sd_jinode_gh;
- struct gfs2_holder sd_ir_gh;
struct gfs2_holder sd_sc_gh;
struct gfs2_holder sd_qc_gh;
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 2f94bd7..fb15d3b1 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -24,7 +24,7 @@
#include "acl.h"
#include "bmap.h"
#include "dir.h"
-#include "eattr.h"
+#include "xattr.h"
#include "glock.h"
#include "glops.h"
#include "inode.h"
@@ -519,139 +519,6 @@
return inode ? inode : ERR_PTR(error);
}
-static void gfs2_inum_range_in(struct gfs2_inum_range_host *ir, const void *buf)
-{
- const struct gfs2_inum_range *str = buf;
-
- ir->ir_start = be64_to_cpu(str->ir_start);
- ir->ir_length = be64_to_cpu(str->ir_length);
-}
-
-static void gfs2_inum_range_out(const struct gfs2_inum_range_host *ir, void *buf)
-{
- struct gfs2_inum_range *str = buf;
-
- str->ir_start = cpu_to_be64(ir->ir_start);
- str->ir_length = cpu_to_be64(ir->ir_length);
-}
-
-static int pick_formal_ino_1(struct gfs2_sbd *sdp, u64 *formal_ino)
-{
- struct gfs2_inode *ip = GFS2_I(sdp->sd_ir_inode);
- struct buffer_head *bh;
- struct gfs2_inum_range_host ir;
- int error;
-
- error = gfs2_trans_begin(sdp, RES_DINODE, 0);
- if (error)
- return error;
- mutex_lock(&sdp->sd_inum_mutex);
-
- error = gfs2_meta_inode_buffer(ip, &bh);
- if (error) {
- mutex_unlock(&sdp->sd_inum_mutex);
- gfs2_trans_end(sdp);
- return error;
- }
-
- gfs2_inum_range_in(&ir, bh->b_data + sizeof(struct gfs2_dinode));
-
- if (ir.ir_length) {
- *formal_ino = ir.ir_start++;
- ir.ir_length--;
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
- gfs2_inum_range_out(&ir,
- bh->b_data + sizeof(struct gfs2_dinode));
- brelse(bh);
- mutex_unlock(&sdp->sd_inum_mutex);
- gfs2_trans_end(sdp);
- return 0;
- }
-
- brelse(bh);
-
- mutex_unlock(&sdp->sd_inum_mutex);
- gfs2_trans_end(sdp);
-
- return 1;
-}
-
-static int pick_formal_ino_2(struct gfs2_sbd *sdp, u64 *formal_ino)
-{
- struct gfs2_inode *ip = GFS2_I(sdp->sd_ir_inode);
- struct gfs2_inode *m_ip = GFS2_I(sdp->sd_inum_inode);
- struct gfs2_holder gh;
- struct buffer_head *bh;
- struct gfs2_inum_range_host ir;
- int error;
-
- error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
- if (error)
- return error;
-
- error = gfs2_trans_begin(sdp, 2 * RES_DINODE, 0);
- if (error)
- goto out;
- mutex_lock(&sdp->sd_inum_mutex);
-
- error = gfs2_meta_inode_buffer(ip, &bh);
- if (error)
- goto out_end_trans;
-
- gfs2_inum_range_in(&ir, bh->b_data + sizeof(struct gfs2_dinode));
-
- if (!ir.ir_length) {
- struct buffer_head *m_bh;
- u64 x, y;
- __be64 z;
-
- error = gfs2_meta_inode_buffer(m_ip, &m_bh);
- if (error)
- goto out_brelse;
-
- z = *(__be64 *)(m_bh->b_data + sizeof(struct gfs2_dinode));
- x = y = be64_to_cpu(z);
- ir.ir_start = x;
- ir.ir_length = GFS2_INUM_QUANTUM;
- x += GFS2_INUM_QUANTUM;
- if (x < y)
- gfs2_consist_inode(m_ip);
- z = cpu_to_be64(x);
- gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
- *(__be64 *)(m_bh->b_data + sizeof(struct gfs2_dinode)) = z;
-
- brelse(m_bh);
- }
-
- *formal_ino = ir.ir_start++;
- ir.ir_length--;
-
- gfs2_trans_add_bh(ip->i_gl, bh, 1);
- gfs2_inum_range_out(&ir, bh->b_data + sizeof(struct gfs2_dinode));
-
-out_brelse:
- brelse(bh);
-out_end_trans:
- mutex_unlock(&sdp->sd_inum_mutex);
- gfs2_trans_end(sdp);
-out:
- gfs2_glock_dq_uninit(&gh);
- return error;
-}
-
-static int pick_formal_ino(struct gfs2_sbd *sdp, u64 *inum)
-{
- int error;
-
- error = pick_formal_ino_1(sdp, inum);
- if (error <= 0)
- return error;
-
- error = pick_formal_ino_2(sdp, inum);
-
- return error;
-}
-
/**
* create_ok - OK to create a new on-disk inode here?
* @dip: Directory in which dinode is to be created
@@ -731,7 +598,7 @@
if (error)
goto out_ipreserv;
- *no_addr = gfs2_alloc_di(dip, generation);
+ error = gfs2_alloc_di(dip, no_addr, generation);
gfs2_trans_end(sdp);
@@ -924,7 +791,6 @@
size_t len;
void *value;
char *name;
- struct gfs2_ea_request er;
err = security_inode_init_security(&ip->i_inode, &dip->i_inode,
&name, &value, &len);
@@ -935,16 +801,7 @@
return err;
}
- memset(&er, 0, sizeof(struct gfs2_ea_request));
-
- er.er_type = GFS2_EATYPE_SECURITY;
- er.er_name = name;
- er.er_data = value;
- er.er_name_len = strlen(name);
- er.er_data_len = len;
-
- err = gfs2_ea_set_i(ip, &er);
-
+ err = gfs2_xattr_set(&ip->i_inode, GFS2_EATYPE_SECURITY, name, value, len, 0);
kfree(value);
kfree(name);
@@ -991,13 +848,10 @@
if (error)
goto fail_gunlock;
- error = pick_formal_ino(sdp, &inum.no_formal_ino);
- if (error)
- goto fail_gunlock;
-
error = alloc_dinode(dip, &inum.no_addr, &generation);
if (error)
goto fail_gunlock;
+ inum.no_formal_ino = generation;
error = gfs2_glock_nq_num(sdp, inum.no_addr, &gfs2_inode_glops,
LM_ST_EXCLUSIVE, GL_SKIP, ghs + 1);
@@ -1008,9 +862,8 @@
if (error)
goto fail_gunlock2;
- inode = gfs2_inode_lookup(dir->i_sb, IF2DT(mode),
- inum.no_addr,
- inum.no_formal_ino, 0);
+ inode = gfs2_inode_lookup(dir->i_sb, IF2DT(mode), inum.no_addr,
+ inum.no_formal_ino, 0);
if (IS_ERR(inode))
goto fail_gunlock2;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 7bc3c45..52fb6c0 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -84,7 +84,6 @@
gfs2_tune_init(&sdp->sd_tune);
- mutex_init(&sdp->sd_inum_mutex);
spin_lock_init(&sdp->sd_statfs_spin);
spin_lock_init(&sdp->sd_rindex_spin);
@@ -833,21 +832,12 @@
if (error)
goto fail;
- /* Read in the master inode number inode */
- sdp->sd_inum_inode = gfs2_lookup_simple(master, "inum");
- if (IS_ERR(sdp->sd_inum_inode)) {
- error = PTR_ERR(sdp->sd_inum_inode);
- fs_err(sdp, "can't read in inum inode: %d\n", error);
- goto fail_journal;
- }
-
-
/* Read in the master statfs inode */
sdp->sd_statfs_inode = gfs2_lookup_simple(master, "statfs");
if (IS_ERR(sdp->sd_statfs_inode)) {
error = PTR_ERR(sdp->sd_statfs_inode);
fs_err(sdp, "can't read in statfs inode: %d\n", error);
- goto fail_inum;
+ goto fail_journal;
}
/* Read in the resource index inode */
@@ -876,8 +866,6 @@
iput(sdp->sd_rindex);
fail_statfs:
iput(sdp->sd_statfs_inode);
-fail_inum:
- iput(sdp->sd_inum_inode);
fail_journal:
init_journal(sdp, UNDO);
fail:
@@ -905,20 +893,12 @@
return error;
}
- sprintf(buf, "inum_range%u", sdp->sd_jdesc->jd_jid);
- sdp->sd_ir_inode = gfs2_lookup_simple(pn, buf);
- if (IS_ERR(sdp->sd_ir_inode)) {
- error = PTR_ERR(sdp->sd_ir_inode);
- fs_err(sdp, "can't find local \"ir\" file: %d\n", error);
- goto fail;
- }
-
sprintf(buf, "statfs_change%u", sdp->sd_jdesc->jd_jid);
sdp->sd_sc_inode = gfs2_lookup_simple(pn, buf);
if (IS_ERR(sdp->sd_sc_inode)) {
error = PTR_ERR(sdp->sd_sc_inode);
fs_err(sdp, "can't find local \"sc\" file: %d\n", error);
- goto fail_ir_i;
+ goto fail;
}
sprintf(buf, "quota_change%u", sdp->sd_jdesc->jd_jid);
@@ -932,27 +912,16 @@
iput(pn);
pn = NULL;
- ip = GFS2_I(sdp->sd_ir_inode);
- error = gfs2_glock_nq_init(ip->i_gl,
- LM_ST_EXCLUSIVE, 0,
- &sdp->sd_ir_gh);
- if (error) {
- fs_err(sdp, "can't lock local \"ir\" file: %d\n", error);
- goto fail_qc_i;
- }
-
ip = GFS2_I(sdp->sd_sc_inode);
- error = gfs2_glock_nq_init(ip->i_gl,
- LM_ST_EXCLUSIVE, 0,
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0,
&sdp->sd_sc_gh);
if (error) {
fs_err(sdp, "can't lock local \"sc\" file: %d\n", error);
- goto fail_ir_gh;
+ goto fail_qc_i;
}
ip = GFS2_I(sdp->sd_qc_inode);
- error = gfs2_glock_nq_init(ip->i_gl,
- LM_ST_EXCLUSIVE, 0,
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0,
&sdp->sd_qc_gh);
if (error) {
fs_err(sdp, "can't lock local \"qc\" file: %d\n", error);
@@ -965,14 +934,10 @@
gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
fail_ut_gh:
gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
-fail_ir_gh:
- gfs2_glock_dq_uninit(&sdp->sd_ir_gh);
fail_qc_i:
iput(sdp->sd_qc_inode);
fail_ut_i:
iput(sdp->sd_sc_inode);
-fail_ir_i:
- iput(sdp->sd_ir_inode);
fail:
if (pn)
iput(pn);
@@ -1063,7 +1028,6 @@
ls->ls_ops = lm;
ls->ls_first = 1;
- ls->ls_id = 0;
for (options = args->ar_hostdata; (o = strsep(&options, ":")); ) {
substring_t tmp[MAX_OPT_ARGS];
@@ -1081,10 +1045,7 @@
ls->ls_jid = option;
break;
case Opt_id:
- ret = match_int(&tmp[0], &option);
- if (ret)
- goto hostdata_error;
- ls->ls_id = option;
+ /* Obsolete, but left for backward compat purposes */
break;
case Opt_first:
ret = match_int(&tmp[0], &option);
@@ -1133,6 +1094,17 @@
lm->lm_unmount(sdp);
}
+void gfs2_online_uevent(struct gfs2_sbd *sdp)
+{
+ struct super_block *sb = sdp->sd_vfs;
+ char ro[20];
+ char spectator[20];
+ char *envp[] = { ro, spectator, NULL };
+ sprintf(ro, "RDONLY=%d", (sb->s_flags & MS_RDONLY) ? 1 : 0);
+ sprintf(spectator, "SPECTATOR=%d", sdp->sd_args.ar_spectator ? 1 : 0);
+ kobject_uevent_env(&sdp->sd_kobj, KOBJ_ONLINE, envp);
+}
+
/**
* fill_super - Read in superblock
* @sb: The VFS superblock
@@ -1157,6 +1129,7 @@
sdp->sd_args.ar_quota = GFS2_QUOTA_DEFAULT;
sdp->sd_args.ar_data = GFS2_DATA_DEFAULT;
sdp->sd_args.ar_commit = 60;
+ sdp->sd_args.ar_errors = GFS2_ERRORS_DEFAULT;
error = gfs2_mount_args(sdp, &sdp->sd_args, data);
if (error) {
@@ -1174,6 +1147,7 @@
sb->s_magic = GFS2_MAGIC;
sb->s_op = &gfs2_super_ops;
sb->s_export_op = &gfs2_export_ops;
+ sb->s_xattr = gfs2_xattr_handlers;
sb->s_time_gran = 1;
sb->s_maxbytes = MAX_LFS_FILESIZE;
@@ -1236,7 +1210,7 @@
}
gfs2_glock_dq_uninit(&mount_gh);
-
+ gfs2_online_uevent(sdp);
return 0;
fail_threads:
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index f8bd20b..c3ac180 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -26,8 +26,7 @@
#include "acl.h"
#include "bmap.h"
#include "dir.h"
-#include "eaops.h"
-#include "eattr.h"
+#include "xattr.h"
#include "glock.h"
#include "inode.h"
#include "meta_io.h"
@@ -349,7 +348,7 @@
error = gfs2_trans_begin(sdp, 2*RES_DINODE + RES_LEAF + RES_RG_BIT, 0);
if (error)
- goto out_rgrp;
+ goto out_gunlock;
error = gfs2_dir_del(dip, &dentry->d_name);
if (error)
@@ -1302,60 +1301,53 @@
const void *data, size_t size, int flags)
{
struct inode *inode = dentry->d_inode;
- struct gfs2_ea_request er;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
- memset(&er, 0, sizeof(struct gfs2_ea_request));
- er.er_type = gfs2_ea_name2type(name, &er.er_name);
- if (er.er_type == GFS2_EATYPE_UNUSED)
- return -EOPNOTSUPP;
- er.er_data = (char *)data;
- er.er_name_len = strlen(er.er_name);
- er.er_data_len = size;
- er.er_flags = flags;
-
- gfs2_assert_warn(GFS2_SB(inode), !(er.er_flags & GFS2_ERF_MODE));
-
- return gfs2_ea_set(GFS2_I(inode), &er);
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret == 0) {
+ ret = generic_setxattr(dentry, name, data, size, flags);
+ gfs2_glock_dq(&gh);
+ }
+ gfs2_holder_uninit(&gh);
+ return ret;
}
static ssize_t gfs2_getxattr(struct dentry *dentry, const char *name,
void *data, size_t size)
{
- struct gfs2_ea_request er;
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
- memset(&er, 0, sizeof(struct gfs2_ea_request));
- er.er_type = gfs2_ea_name2type(name, &er.er_name);
- if (er.er_type == GFS2_EATYPE_UNUSED)
- return -EOPNOTSUPP;
- er.er_data = data;
- er.er_name_len = strlen(er.er_name);
- er.er_data_len = size;
-
- return gfs2_ea_get(GFS2_I(dentry->d_inode), &er);
-}
-
-static ssize_t gfs2_listxattr(struct dentry *dentry, char *buffer, size_t size)
-{
- struct gfs2_ea_request er;
-
- memset(&er, 0, sizeof(struct gfs2_ea_request));
- er.er_data = (size) ? buffer : NULL;
- er.er_data_len = size;
-
- return gfs2_ea_list(GFS2_I(dentry->d_inode), &er);
+ gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret == 0) {
+ ret = generic_getxattr(dentry, name, data, size);
+ gfs2_glock_dq(&gh);
+ }
+ gfs2_holder_uninit(&gh);
+ return ret;
}
static int gfs2_removexattr(struct dentry *dentry, const char *name)
{
- struct gfs2_ea_request er;
+ struct inode *inode = dentry->d_inode;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_holder gh;
+ int ret;
- memset(&er, 0, sizeof(struct gfs2_ea_request));
- er.er_type = gfs2_ea_name2type(name, &er.er_name);
- if (er.er_type == GFS2_EATYPE_UNUSED)
- return -EOPNOTSUPP;
- er.er_name_len = strlen(er.er_name);
-
- return gfs2_ea_remove(GFS2_I(dentry->d_inode), &er);
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ ret = gfs2_glock_nq(&gh);
+ if (ret == 0) {
+ ret = generic_removexattr(dentry, name);
+ gfs2_glock_dq(&gh);
+ }
+ gfs2_holder_uninit(&gh);
+ return ret;
}
static int gfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index fba7957..18d3a28 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1256,7 +1256,7 @@
* Returns: The block type (GFS2_BLKST_*)
*/
-unsigned char gfs2_get_block_type(struct gfs2_rgrpd *rgd, u64 block)
+static unsigned char gfs2_get_block_type(struct gfs2_rgrpd *rgd, u64 block)
{
struct gfs2_bitmap *bi = NULL;
u32 length, rgrp_block, buf_block;
@@ -1459,6 +1459,16 @@
return 0;
}
+static void gfs2_rgrp_error(struct gfs2_rgrpd *rgd)
+{
+ struct gfs2_sbd *sdp = rgd->rd_sbd;
+ fs_warn(sdp, "rgrp %llu has an error, marking it readonly until umount\n",
+ (unsigned long long)rgd->rd_addr);
+ fs_warn(sdp, "umount on all nodes and run fsck.gfs2 to fix the error\n");
+ gfs2_rgrp_dump(NULL, rgd->rd_gl);
+ rgd->rd_flags |= GFS2_RDF_ERROR;
+}
+
/**
* gfs2_alloc_block - Allocate one or more blocks
* @ip: the inode to allocate the block for
@@ -1520,22 +1530,20 @@
return 0;
rgrp_error:
- fs_warn(sdp, "rgrp %llu has an error, marking it readonly until umount\n",
- (unsigned long long)rgd->rd_addr);
- fs_warn(sdp, "umount on all nodes and run fsck.gfs2 to fix the error\n");
- gfs2_rgrp_dump(NULL, rgd->rd_gl);
- rgd->rd_flags |= GFS2_RDF_ERROR;
+ gfs2_rgrp_error(rgd);
return -EIO;
}
/**
* gfs2_alloc_di - Allocate a dinode
* @dip: the directory that the inode is going in
+ * @bn: the block number which is allocated
+ * @generation: the generation number of the inode
*
- * Returns: the block allocated
+ * Returns: 0 on success or error
*/
-u64 gfs2_alloc_di(struct gfs2_inode *dip, u64 *generation)
+int gfs2_alloc_di(struct gfs2_inode *dip, u64 *bn, u64 *generation)
{
struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
struct gfs2_alloc *al = dip->i_alloc;
@@ -1546,16 +1554,21 @@
blk = rgblk_search(rgd, rgd->rd_last_alloc,
GFS2_BLKST_FREE, GFS2_BLKST_DINODE, &n);
- BUG_ON(blk == BFITNOENT);
+
+ /* Since all blocks are reserved in advance, this shouldn't happen */
+ if (blk == BFITNOENT)
+ goto rgrp_error;
rgd->rd_last_alloc = blk;
-
block = rgd->rd_data0 + blk;
+ if (rgd->rd_free == 0)
+ goto rgrp_error;
- gfs2_assert_withdraw(sdp, rgd->rd_free);
rgd->rd_free--;
rgd->rd_dinodes++;
*generation = rgd->rd_igeneration++;
+ if (*generation == 0)
+ *generation = rgd->rd_igeneration++;
gfs2_trans_add_bh(rgd->rd_gl, rgd->rd_bits[0].bi_bh, 1);
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
@@ -1568,7 +1581,12 @@
rgd->rd_free_clone--;
spin_unlock(&sdp->sd_rindex_spin);
trace_gfs2_block_alloc(dip, block, 1, GFS2_BLKST_DINODE);
- return block;
+ *bn = block;
+ return 0;
+
+rgrp_error:
+ gfs2_rgrp_error(rgd);
+ return -EIO;
}
/**
@@ -1676,6 +1694,46 @@
}
/**
+ * gfs2_check_blk_type - Check the type of a block
+ * @sdp: The superblock
+ * @no_addr: The block number to check
+ * @type: The block type we are looking for
+ *
+ * Returns: 0 if the block type matches the expected type
+ * -ESTALE if it doesn't match
+ * or -ve errno if something went wrong while checking
+ */
+
+int gfs2_check_blk_type(struct gfs2_sbd *sdp, u64 no_addr, unsigned int type)
+{
+ struct gfs2_rgrpd *rgd;
+ struct gfs2_holder ri_gh, rgd_gh;
+ int error;
+
+ error = gfs2_rindex_hold(sdp, &ri_gh);
+ if (error)
+ goto fail;
+
+ error = -EINVAL;
+ rgd = gfs2_blk2rgrpd(sdp, no_addr);
+ if (!rgd)
+ goto fail_rindex;
+
+ error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_SHARED, 0, &rgd_gh);
+ if (error)
+ goto fail_rindex;
+
+ if (gfs2_get_block_type(rgd, no_addr) != type)
+ error = -ESTALE;
+
+ gfs2_glock_dq_uninit(&rgd_gh);
+fail_rindex:
+ gfs2_glock_dq_uninit(&ri_gh);
+fail:
+ return error;
+}
+
+/**
* gfs2_rlist_add - add a RG to a list of RGs
* @sdp: the filesystem
* @rlist: the list of resource groups
diff --git a/fs/gfs2/rgrp.h b/fs/gfs2/rgrp.h
index 1e76ff0..b4106dd 100644
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -44,15 +44,15 @@
extern void gfs2_inplace_release(struct gfs2_inode *ip);
-extern unsigned char gfs2_get_block_type(struct gfs2_rgrpd *rgd, u64 block);
-
extern int gfs2_alloc_block(struct gfs2_inode *ip, u64 *bn, unsigned int *n);
-extern u64 gfs2_alloc_di(struct gfs2_inode *ip, u64 *generation);
+extern int gfs2_alloc_di(struct gfs2_inode *ip, u64 *bn, u64 *generation);
extern void gfs2_free_data(struct gfs2_inode *ip, u64 bstart, u32 blen);
extern void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen);
extern void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip);
extern void gfs2_unlink_di(struct inode *inode);
+extern int gfs2_check_blk_type(struct gfs2_sbd *sdp, u64 no_addr,
+ unsigned int type);
struct gfs2_rgrp_list {
unsigned int rl_rgrps;
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index f522bb0..0ec3ec6 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -38,7 +38,7 @@
#include "trans.h"
#include "util.h"
#include "sys.h"
-#include "eattr.h"
+#include "xattr.h"
#define args_neq(a1, a2, x) ((a1)->ar_##x != (a2)->ar_##x)
@@ -68,6 +68,8 @@
Opt_discard,
Opt_nodiscard,
Opt_commit,
+ Opt_err_withdraw,
+ Opt_err_panic,
Opt_error,
};
@@ -97,6 +99,8 @@
{Opt_discard, "discard"},
{Opt_nodiscard, "nodiscard"},
{Opt_commit, "commit=%d"},
+ {Opt_err_withdraw, "errors=withdraw"},
+ {Opt_err_panic, "errors=panic"},
{Opt_error, NULL}
};
@@ -152,6 +156,11 @@
args->ar_localcaching = 1;
break;
case Opt_debug:
+ if (args->ar_errors == GFS2_ERRORS_PANIC) {
+ fs_info(sdp, "-o debug and -o errors=panic "
+ "are mutually exclusive.\n");
+ return -EINVAL;
+ }
args->ar_debug = 1;
break;
case Opt_nodebug:
@@ -205,6 +214,17 @@
return rv ? rv : -EINVAL;
}
break;
+ case Opt_err_withdraw:
+ args->ar_errors = GFS2_ERRORS_WITHDRAW;
+ break;
+ case Opt_err_panic:
+ if (args->ar_debug) {
+ fs_info(sdp, "-o debug and -o errors=panic "
+ "are mutually exclusive.\n");
+ return -EINVAL;
+ }
+ args->ar_errors = GFS2_ERRORS_PANIC;
+ break;
case Opt_error:
default:
fs_info(sdp, "invalid mount option: %s\n", o);
@@ -768,7 +788,6 @@
/* Release stuff */
iput(sdp->sd_jindex);
- iput(sdp->sd_inum_inode);
iput(sdp->sd_statfs_inode);
iput(sdp->sd_rindex);
iput(sdp->sd_quota_inode);
@@ -779,10 +798,8 @@
if (!sdp->sd_args.ar_spectator) {
gfs2_glock_dq_uninit(&sdp->sd_journal_gh);
gfs2_glock_dq_uninit(&sdp->sd_jinode_gh);
- gfs2_glock_dq_uninit(&sdp->sd_ir_gh);
gfs2_glock_dq_uninit(&sdp->sd_sc_gh);
gfs2_glock_dq_uninit(&sdp->sd_qc_gh);
- iput(sdp->sd_ir_inode);
iput(sdp->sd_sc_inode);
iput(sdp->sd_qc_inode);
}
@@ -1084,6 +1101,7 @@
gt->gt_log_flush_secs = args.ar_commit;
spin_unlock(>->gt_spin);
+ gfs2_online_uevent(sdp);
return 0;
}
@@ -1225,6 +1243,22 @@
lfsecs = sdp->sd_tune.gt_log_flush_secs;
if (lfsecs != 60)
seq_printf(s, ",commit=%d", lfsecs);
+ if (args->ar_errors != GFS2_ERRORS_DEFAULT) {
+ const char *state;
+
+ switch (args->ar_errors) {
+ case GFS2_ERRORS_WITHDRAW:
+ state = "withdraw";
+ break;
+ case GFS2_ERRORS_PANIC:
+ state = "panic";
+ break;
+ default:
+ state = "unknown";
+ break;
+ }
+ seq_printf(s, ",errors=%s", state);
+ }
return 0;
}
@@ -1252,6 +1286,10 @@
goto out;
}
+ error = gfs2_check_blk_type(sdp, ip->i_no_addr, GFS2_BLKST_UNLINKED);
+ if (error)
+ goto out_truncate;
+
gfs2_glock_dq_wait(&ip->i_iopen_gh);
gfs2_holder_reinit(LM_ST_EXCLUSIVE, LM_FLAG_TRY_1CB | GL_NOCACHE, &ip->i_iopen_gh);
error = gfs2_glock_nq(&ip->i_iopen_gh);
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index 22e0417..235db36 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -25,7 +25,7 @@
return x;
}
-void gfs2_jindex_free(struct gfs2_sbd *sdp);
+extern void gfs2_jindex_free(struct gfs2_sbd *sdp);
extern int gfs2_mount_args(struct gfs2_sbd *sdp, struct gfs2_args *args, char *data);
@@ -36,7 +36,7 @@
struct gfs2_inode **ipp);
extern int gfs2_make_fs_rw(struct gfs2_sbd *sdp);
-
+extern void gfs2_online_uevent(struct gfs2_sbd *sdp);
extern int gfs2_statfs_init(struct gfs2_sbd *sdp);
extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
s64 dinodes);
@@ -54,6 +54,7 @@
extern const struct export_operations gfs2_export_ops;
extern const struct super_operations gfs2_super_ops;
extern const struct dentry_operations gfs2_dops;
+extern struct xattr_handler *gfs2_xattr_handlers[];
#endif /* __SUPER_DOT_H__ */
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index a7cbfbd..4463297 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -16,6 +16,7 @@
#include <linux/kobject.h>
#include <asm/uaccess.h>
#include <linux/gfs2_ondisk.h>
+#include <linux/genhd.h>
#include "gfs2.h"
#include "incore.h"
@@ -319,12 +320,6 @@
return ret;
}
-static ssize_t lkid_show(struct gfs2_sbd *sdp, char *buf)
-{
- struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- return sprintf(buf, "%u\n", ls->ls_id);
-}
-
static ssize_t lkfirst_show(struct gfs2_sbd *sdp, char *buf)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
@@ -389,7 +384,6 @@
GDLM_ATTR(proto_name, 0444, proto_name_show, NULL);
GDLM_ATTR(block, 0644, block_show, block_store);
GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store);
-GDLM_ATTR(id, 0444, lkid_show, NULL);
GDLM_ATTR(jid, 0444, jid_show, NULL);
GDLM_ATTR(first, 0444, lkfirst_show, NULL);
GDLM_ATTR(first_done, 0444, first_done_show, NULL);
@@ -401,7 +395,6 @@
&gdlm_attr_proto_name.attr,
&gdlm_attr_block.attr,
&gdlm_attr_withdraw.attr,
- &gdlm_attr_id.attr,
&gdlm_attr_jid.attr,
&gdlm_attr_first.attr,
&gdlm_attr_first_done.attr,
@@ -519,7 +512,14 @@
int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
{
+ struct super_block *sb = sdp->sd_vfs;
int error;
+ char ro[20];
+ char spectator[20];
+ char *envp[] = { ro, spectator, NULL };
+
+ sprintf(ro, "RDONLY=%d", (sb->s_flags & MS_RDONLY) ? 1 : 0);
+ sprintf(spectator, "SPECTATOR=%d", sdp->sd_args.ar_spectator ? 1 : 0);
sdp->sd_kobj.kset = gfs2_kset;
error = kobject_init_and_add(&sdp->sd_kobj, &gfs2_ktype, NULL,
@@ -535,9 +535,17 @@
if (error)
goto fail_tune;
- kobject_uevent(&sdp->sd_kobj, KOBJ_ADD);
+ error = sysfs_create_link(&sdp->sd_kobj,
+ &disk_to_dev(sb->s_bdev->bd_disk)->kobj,
+ "device");
+ if (error)
+ goto fail_lock_module;
+
+ kobject_uevent_env(&sdp->sd_kobj, KOBJ_ADD, envp);
return 0;
+fail_lock_module:
+ sysfs_remove_group(&sdp->sd_kobj, &lock_module_group);
fail_tune:
sysfs_remove_group(&sdp->sd_kobj, &tune_group);
fail_reg:
@@ -549,12 +557,12 @@
void gfs2_sys_fs_del(struct gfs2_sbd *sdp)
{
+ sysfs_remove_link(&sdp->sd_kobj, "device");
sysfs_remove_group(&sdp->sd_kobj, &tune_group);
sysfs_remove_group(&sdp->sd_kobj, &lock_module_group);
kobject_put(&sdp->sd_kobj);
}
-
static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
struct kobj_uevent_env *env)
{
@@ -563,6 +571,8 @@
add_uevent_var(env, "LOCKTABLE=%s", sdp->sd_table_name);
add_uevent_var(env, "LOCKPROTO=%s", sdp->sd_proto_name);
+ if (!sdp->sd_args.ar_spectator)
+ add_uevent_var(env, "JOURNALID=%u", sdp->sd_lockstruct.ls_jid);
if (gfs2_uuid_valid(uuid)) {
add_uevent_var(env, "UUID=%02X%02X%02X%02X-%02X%02X-%02X%02X-"
"%02X%02X-%02X%02X%02X%02X%02X%02X",
@@ -578,7 +588,6 @@
.uevent = gfs2_uevent,
};
-
int gfs2_sys_init(void)
{
gfs2_kset = kset_create_and_add("gfs2", &gfs2_uevent_ops, fs_kobj);
diff --git a/fs/gfs2/util.c b/fs/gfs2/util.c
index 9d12b11..f6a7efa 100644
--- a/fs/gfs2/util.c
+++ b/fs/gfs2/util.c
@@ -38,24 +38,30 @@
const struct lm_lockops *lm = ls->ls_ops;
va_list args;
- if (test_and_set_bit(SDF_SHUTDOWN, &sdp->sd_flags))
+ if (sdp->sd_args.ar_errors == GFS2_ERRORS_WITHDRAW &&
+ test_and_set_bit(SDF_SHUTDOWN, &sdp->sd_flags))
return 0;
va_start(args, fmt);
vprintk(fmt, args);
va_end(args);
- fs_err(sdp, "about to withdraw this file system\n");
- BUG_ON(sdp->sd_args.ar_debug);
+ if (sdp->sd_args.ar_errors == GFS2_ERRORS_WITHDRAW) {
+ fs_err(sdp, "about to withdraw this file system\n");
+ BUG_ON(sdp->sd_args.ar_debug);
- kobject_uevent(&sdp->sd_kobj, KOBJ_OFFLINE);
+ kobject_uevent(&sdp->sd_kobj, KOBJ_OFFLINE);
- if (lm->lm_unmount) {
- fs_err(sdp, "telling LM to unmount\n");
- lm->lm_unmount(sdp);
+ if (lm->lm_unmount) {
+ fs_err(sdp, "telling LM to unmount\n");
+ lm->lm_unmount(sdp);
+ }
+ fs_err(sdp, "withdrawn\n");
+ dump_stack();
}
- fs_err(sdp, "withdrawn\n");
- dump_stack();
+
+ if (sdp->sd_args.ar_errors == GFS2_ERRORS_PANIC)
+ panic("GFS2: fsid=%s: panic requested.\n", sdp->sd_fsname);
return -1;
}
@@ -93,17 +99,24 @@
gfs2_tune_get(sdp, gt_complain_secs) * HZ))
return -2;
- printk(KERN_WARNING
- "GFS2: fsid=%s: warning: assertion \"%s\" failed\n"
- "GFS2: fsid=%s: function = %s, file = %s, line = %u\n",
- sdp->sd_fsname, assertion,
- sdp->sd_fsname, function, file, line);
+ if (sdp->sd_args.ar_errors == GFS2_ERRORS_WITHDRAW)
+ printk(KERN_WARNING
+ "GFS2: fsid=%s: warning: assertion \"%s\" failed\n"
+ "GFS2: fsid=%s: function = %s, file = %s, line = %u\n",
+ sdp->sd_fsname, assertion,
+ sdp->sd_fsname, function, file, line);
if (sdp->sd_args.ar_debug)
BUG();
else
dump_stack();
+ if (sdp->sd_args.ar_errors == GFS2_ERRORS_PANIC)
+ panic("GFS2: fsid=%s: warning: assertion \"%s\" failed\n"
+ "GFS2: fsid=%s: function = %s, file = %s, line = %u\n",
+ sdp->sd_fsname, assertion,
+ sdp->sd_fsname, function, file, line);
+
sdp->sd_last_warning = jiffies;
return -1;
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
new file mode 100644
index 0000000..8a0f8ef
--- /dev/null
+++ b/fs/gfs2/xattr.c
@@ -0,0 +1,1558 @@
+/*
+ * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
+ * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/buffer_head.h>
+#include <linux/xattr.h>
+#include <linux/gfs2_ondisk.h>
+#include <asm/uaccess.h>
+
+#include "gfs2.h"
+#include "incore.h"
+#include "acl.h"
+#include "xattr.h"
+#include "glock.h"
+#include "inode.h"
+#include "meta_io.h"
+#include "quota.h"
+#include "rgrp.h"
+#include "trans.h"
+#include "util.h"
+
+/**
+ * ea_calc_size - returns the acutal number of bytes the request will take up
+ * (not counting any unstuffed data blocks)
+ * @sdp:
+ * @er:
+ * @size:
+ *
+ * Returns: 1 if the EA should be stuffed
+ */
+
+static int ea_calc_size(struct gfs2_sbd *sdp, unsigned int nsize, size_t dsize,
+ unsigned int *size)
+{
+ unsigned int jbsize = sdp->sd_jbsize;
+
+ /* Stuffed */
+ *size = ALIGN(sizeof(struct gfs2_ea_header) + nsize + dsize, 8);
+
+ if (*size <= jbsize)
+ return 1;
+
+ /* Unstuffed */
+ *size = ALIGN(sizeof(struct gfs2_ea_header) + nsize +
+ (sizeof(__be64) * DIV_ROUND_UP(dsize, jbsize)), 8);
+
+ return 0;
+}
+
+static int ea_check_size(struct gfs2_sbd *sdp, unsigned int nsize, size_t dsize)
+{
+ unsigned int size;
+
+ if (dsize > GFS2_EA_MAX_DATA_LEN)
+ return -ERANGE;
+
+ ea_calc_size(sdp, nsize, dsize, &size);
+
+ /* This can only happen with 512 byte blocks */
+ if (size > sdp->sd_jbsize)
+ return -ERANGE;
+
+ return 0;
+}
+
+typedef int (*ea_call_t) (struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea,
+ struct gfs2_ea_header *prev, void *private);
+
+static int ea_foreach_i(struct gfs2_inode *ip, struct buffer_head *bh,
+ ea_call_t ea_call, void *data)
+{
+ struct gfs2_ea_header *ea, *prev = NULL;
+ int error = 0;
+
+ if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), bh, GFS2_METATYPE_EA))
+ return -EIO;
+
+ for (ea = GFS2_EA_BH2FIRST(bh);; prev = ea, ea = GFS2_EA2NEXT(ea)) {
+ if (!GFS2_EA_REC_LEN(ea))
+ goto fail;
+ if (!(bh->b_data <= (char *)ea && (char *)GFS2_EA2NEXT(ea) <=
+ bh->b_data + bh->b_size))
+ goto fail;
+ if (!GFS2_EATYPE_VALID(ea->ea_type))
+ goto fail;
+
+ error = ea_call(ip, bh, ea, prev, data);
+ if (error)
+ return error;
+
+ if (GFS2_EA_IS_LAST(ea)) {
+ if ((char *)GFS2_EA2NEXT(ea) !=
+ bh->b_data + bh->b_size)
+ goto fail;
+ break;
+ }
+ }
+
+ return error;
+
+fail:
+ gfs2_consist_inode(ip);
+ return -EIO;
+}
+
+static int ea_foreach(struct gfs2_inode *ip, ea_call_t ea_call, void *data)
+{
+ struct buffer_head *bh, *eabh;
+ __be64 *eablk, *end;
+ int error;
+
+ error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT, &bh);
+ if (error)
+ return error;
+
+ if (!(ip->i_diskflags & GFS2_DIF_EA_INDIRECT)) {
+ error = ea_foreach_i(ip, bh, ea_call, data);
+ goto out;
+ }
+
+ if (gfs2_metatype_check(GFS2_SB(&ip->i_inode), bh, GFS2_METATYPE_IN)) {
+ error = -EIO;
+ goto out;
+ }
+
+ eablk = (__be64 *)(bh->b_data + sizeof(struct gfs2_meta_header));
+ end = eablk + GFS2_SB(&ip->i_inode)->sd_inptrs;
+
+ for (; eablk < end; eablk++) {
+ u64 bn;
+
+ if (!*eablk)
+ break;
+ bn = be64_to_cpu(*eablk);
+
+ error = gfs2_meta_read(ip->i_gl, bn, DIO_WAIT, &eabh);
+ if (error)
+ break;
+ error = ea_foreach_i(ip, eabh, ea_call, data);
+ brelse(eabh);
+ if (error)
+ break;
+ }
+out:
+ brelse(bh);
+ return error;
+}
+
+struct ea_find {
+ int type;
+ const char *name;
+ size_t namel;
+ struct gfs2_ea_location *ef_el;
+};
+
+static int ea_find_i(struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea, struct gfs2_ea_header *prev,
+ void *private)
+{
+ struct ea_find *ef = private;
+
+ if (ea->ea_type == GFS2_EATYPE_UNUSED)
+ return 0;
+
+ if (ea->ea_type == ef->type) {
+ if (ea->ea_name_len == ef->namel &&
+ !memcmp(GFS2_EA2NAME(ea), ef->name, ea->ea_name_len)) {
+ struct gfs2_ea_location *el = ef->ef_el;
+ get_bh(bh);
+ el->el_bh = bh;
+ el->el_ea = ea;
+ el->el_prev = prev;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+int gfs2_ea_find(struct gfs2_inode *ip, int type, const char *name,
+ struct gfs2_ea_location *el)
+{
+ struct ea_find ef;
+ int error;
+
+ ef.type = type;
+ ef.name = name;
+ ef.namel = strlen(name);
+ ef.ef_el = el;
+
+ memset(el, 0, sizeof(struct gfs2_ea_location));
+
+ error = ea_foreach(ip, ea_find_i, &ef);
+ if (error > 0)
+ return 0;
+
+ return error;
+}
+
+/**
+ * ea_dealloc_unstuffed -
+ * @ip:
+ * @bh:
+ * @ea:
+ * @prev:
+ * @private:
+ *
+ * Take advantage of the fact that all unstuffed blocks are
+ * allocated from the same RG. But watch, this may not always
+ * be true.
+ *
+ * Returns: errno
+ */
+
+static int ea_dealloc_unstuffed(struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea,
+ struct gfs2_ea_header *prev, void *private)
+{
+ int *leave = private;
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct gfs2_rgrpd *rgd;
+ struct gfs2_holder rg_gh;
+ struct buffer_head *dibh;
+ __be64 *dataptrs;
+ u64 bn = 0;
+ u64 bstart = 0;
+ unsigned int blen = 0;
+ unsigned int blks = 0;
+ unsigned int x;
+ int error;
+
+ if (GFS2_EA_IS_STUFFED(ea))
+ return 0;
+
+ dataptrs = GFS2_EA2DATAPTRS(ea);
+ for (x = 0; x < ea->ea_num_ptrs; x++, dataptrs++) {
+ if (*dataptrs) {
+ blks++;
+ bn = be64_to_cpu(*dataptrs);
+ }
+ }
+ if (!blks)
+ return 0;
+
+ rgd = gfs2_blk2rgrpd(sdp, bn);
+ if (!rgd) {
+ gfs2_consist_inode(ip);
+ return -EIO;
+ }
+
+ error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, &rg_gh);
+ if (error)
+ return error;
+
+ error = gfs2_trans_begin(sdp, rgd->rd_length + RES_DINODE +
+ RES_EATTR + RES_STATFS + RES_QUOTA, blks);
+ if (error)
+ goto out_gunlock;
+
+ gfs2_trans_add_bh(ip->i_gl, bh, 1);
+
+ dataptrs = GFS2_EA2DATAPTRS(ea);
+ for (x = 0; x < ea->ea_num_ptrs; x++, dataptrs++) {
+ if (!*dataptrs)
+ break;
+ bn = be64_to_cpu(*dataptrs);
+
+ if (bstart + blen == bn)
+ blen++;
+ else {
+ if (bstart)
+ gfs2_free_meta(ip, bstart, blen);
+ bstart = bn;
+ blen = 1;
+ }
+
+ *dataptrs = 0;
+ gfs2_add_inode_blocks(&ip->i_inode, -1);
+ }
+ if (bstart)
+ gfs2_free_meta(ip, bstart, blen);
+
+ if (prev && !leave) {
+ u32 len;
+
+ len = GFS2_EA_REC_LEN(prev) + GFS2_EA_REC_LEN(ea);
+ prev->ea_rec_len = cpu_to_be32(len);
+
+ if (GFS2_EA_IS_LAST(ea))
+ prev->ea_flags |= GFS2_EAFLAG_LAST;
+ } else {
+ ea->ea_type = GFS2_EATYPE_UNUSED;
+ ea->ea_num_ptrs = 0;
+ }
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (!error) {
+ ip->i_inode.i_ctime = CURRENT_TIME;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+ gfs2_trans_end(sdp);
+
+out_gunlock:
+ gfs2_glock_dq_uninit(&rg_gh);
+ return error;
+}
+
+static int ea_remove_unstuffed(struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea,
+ struct gfs2_ea_header *prev, int leave)
+{
+ struct gfs2_alloc *al;
+ int error;
+
+ al = gfs2_alloc_get(ip);
+ if (!al)
+ return -ENOMEM;
+
+ error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
+ if (error)
+ goto out_alloc;
+
+ error = gfs2_rindex_hold(GFS2_SB(&ip->i_inode), &al->al_ri_gh);
+ if (error)
+ goto out_quota;
+
+ error = ea_dealloc_unstuffed(ip, bh, ea, prev, (leave) ? &error : NULL);
+
+ gfs2_glock_dq_uninit(&al->al_ri_gh);
+
+out_quota:
+ gfs2_quota_unhold(ip);
+out_alloc:
+ gfs2_alloc_put(ip);
+ return error;
+}
+
+struct ea_list {
+ struct gfs2_ea_request *ei_er;
+ unsigned int ei_size;
+};
+
+static inline unsigned int gfs2_ea_strlen(struct gfs2_ea_header *ea)
+{
+ switch (ea->ea_type) {
+ case GFS2_EATYPE_USR:
+ return 5 + ea->ea_name_len + 1;
+ case GFS2_EATYPE_SYS:
+ return 7 + ea->ea_name_len + 1;
+ case GFS2_EATYPE_SECURITY:
+ return 9 + ea->ea_name_len + 1;
+ default:
+ return 0;
+ }
+}
+
+static int ea_list_i(struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea, struct gfs2_ea_header *prev,
+ void *private)
+{
+ struct ea_list *ei = private;
+ struct gfs2_ea_request *er = ei->ei_er;
+ unsigned int ea_size = gfs2_ea_strlen(ea);
+
+ if (ea->ea_type == GFS2_EATYPE_UNUSED)
+ return 0;
+
+ if (er->er_data_len) {
+ char *prefix = NULL;
+ unsigned int l = 0;
+ char c = 0;
+
+ if (ei->ei_size + ea_size > er->er_data_len)
+ return -ERANGE;
+
+ switch (ea->ea_type) {
+ case GFS2_EATYPE_USR:
+ prefix = "user.";
+ l = 5;
+ break;
+ case GFS2_EATYPE_SYS:
+ prefix = "system.";
+ l = 7;
+ break;
+ case GFS2_EATYPE_SECURITY:
+ prefix = "security.";
+ l = 9;
+ break;
+ }
+
+ BUG_ON(l == 0);
+
+ memcpy(er->er_data + ei->ei_size, prefix, l);
+ memcpy(er->er_data + ei->ei_size + l, GFS2_EA2NAME(ea),
+ ea->ea_name_len);
+ memcpy(er->er_data + ei->ei_size + ea_size - 1, &c, 1);
+ }
+
+ ei->ei_size += ea_size;
+
+ return 0;
+}
+
+/**
+ * gfs2_listxattr - List gfs2 extended attributes
+ * @dentry: The dentry whose inode we are interested in
+ * @buffer: The buffer to write the results
+ * @size: The size of the buffer
+ *
+ * Returns: actual size of data on success, -errno on error
+ */
+
+ssize_t gfs2_listxattr(struct dentry *dentry, char *buffer, size_t size)
+{
+ struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
+ struct gfs2_ea_request er;
+ struct gfs2_holder i_gh;
+ int error;
+
+ memset(&er, 0, sizeof(struct gfs2_ea_request));
+ if (size) {
+ er.er_data = buffer;
+ er.er_data_len = size;
+ }
+
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+ if (error)
+ return error;
+
+ if (ip->i_eattr) {
+ struct ea_list ei = { .ei_er = &er, .ei_size = 0 };
+
+ error = ea_foreach(ip, ea_list_i, &ei);
+ if (!error)
+ error = ei.ei_size;
+ }
+
+ gfs2_glock_dq_uninit(&i_gh);
+
+ return error;
+}
+
+/**
+ * ea_get_unstuffed - actually copies the unstuffed data into the
+ * request buffer
+ * @ip: The GFS2 inode
+ * @ea: The extended attribute header structure
+ * @data: The data to be copied
+ *
+ * Returns: errno
+ */
+
+static int ea_get_unstuffed(struct gfs2_inode *ip, struct gfs2_ea_header *ea,
+ char *data)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head **bh;
+ unsigned int amount = GFS2_EA_DATA_LEN(ea);
+ unsigned int nptrs = DIV_ROUND_UP(amount, sdp->sd_jbsize);
+ __be64 *dataptrs = GFS2_EA2DATAPTRS(ea);
+ unsigned int x;
+ int error = 0;
+
+ bh = kcalloc(nptrs, sizeof(struct buffer_head *), GFP_NOFS);
+ if (!bh)
+ return -ENOMEM;
+
+ for (x = 0; x < nptrs; x++) {
+ error = gfs2_meta_read(ip->i_gl, be64_to_cpu(*dataptrs), 0,
+ bh + x);
+ if (error) {
+ while (x--)
+ brelse(bh[x]);
+ goto out;
+ }
+ dataptrs++;
+ }
+
+ for (x = 0; x < nptrs; x++) {
+ error = gfs2_meta_wait(sdp, bh[x]);
+ if (error) {
+ for (; x < nptrs; x++)
+ brelse(bh[x]);
+ goto out;
+ }
+ if (gfs2_metatype_check(sdp, bh[x], GFS2_METATYPE_ED)) {
+ for (; x < nptrs; x++)
+ brelse(bh[x]);
+ error = -EIO;
+ goto out;
+ }
+
+ memcpy(data, bh[x]->b_data + sizeof(struct gfs2_meta_header),
+ (sdp->sd_jbsize > amount) ? amount : sdp->sd_jbsize);
+
+ amount -= sdp->sd_jbsize;
+ data += sdp->sd_jbsize;
+
+ brelse(bh[x]);
+ }
+
+out:
+ kfree(bh);
+ return error;
+}
+
+int gfs2_ea_get_copy(struct gfs2_inode *ip, struct gfs2_ea_location *el,
+ char *data, size_t size)
+{
+ int ret;
+ size_t len = GFS2_EA_DATA_LEN(el->el_ea);
+ if (len > size)
+ return -ERANGE;
+
+ if (GFS2_EA_IS_STUFFED(el->el_ea)) {
+ memcpy(data, GFS2_EA2DATA(el->el_ea), len);
+ return len;
+ }
+ ret = ea_get_unstuffed(ip, el->el_ea, data);
+ if (ret < 0)
+ return ret;
+ return len;
+}
+
+/**
+ * gfs2_xattr_get - Get a GFS2 extended attribute
+ * @inode: The inode
+ * @type: The type of extended attribute
+ * @name: The name of the extended attribute
+ * @buffer: The buffer to write the result into
+ * @size: The size of the buffer
+ *
+ * Returns: actual size of data on success, -errno on error
+ */
+
+int gfs2_xattr_get(struct inode *inode, int type, const char *name,
+ void *buffer, size_t size)
+{
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_ea_location el;
+ int error;
+
+ if (!ip->i_eattr)
+ return -ENODATA;
+ if (strlen(name) > GFS2_EA_MAX_NAME_LEN)
+ return -EINVAL;
+
+ error = gfs2_ea_find(ip, type, name, &el);
+ if (error)
+ return error;
+ if (!el.el_ea)
+ return -ENODATA;
+ if (size)
+ error = gfs2_ea_get_copy(ip, &el, buffer, size);
+ else
+ error = GFS2_EA_DATA_LEN(el.el_ea);
+ brelse(el.el_bh);
+
+ return error;
+}
+
+/**
+ * ea_alloc_blk - allocates a new block for extended attributes.
+ * @ip: A pointer to the inode that's getting extended attributes
+ * @bhp: Pointer to pointer to a struct buffer_head
+ *
+ * Returns: errno
+ */
+
+static int ea_alloc_blk(struct gfs2_inode *ip, struct buffer_head **bhp)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct gfs2_ea_header *ea;
+ unsigned int n = 1;
+ u64 block;
+ int error;
+
+ error = gfs2_alloc_block(ip, &block, &n);
+ if (error)
+ return error;
+ gfs2_trans_add_unrevoke(sdp, block, 1);
+ *bhp = gfs2_meta_new(ip->i_gl, block);
+ gfs2_trans_add_bh(ip->i_gl, *bhp, 1);
+ gfs2_metatype_set(*bhp, GFS2_METATYPE_EA, GFS2_FORMAT_EA);
+ gfs2_buffer_clear_tail(*bhp, sizeof(struct gfs2_meta_header));
+
+ ea = GFS2_EA_BH2FIRST(*bhp);
+ ea->ea_rec_len = cpu_to_be32(sdp->sd_jbsize);
+ ea->ea_type = GFS2_EATYPE_UNUSED;
+ ea->ea_flags = GFS2_EAFLAG_LAST;
+ ea->ea_num_ptrs = 0;
+
+ gfs2_add_inode_blocks(&ip->i_inode, 1);
+
+ return 0;
+}
+
+/**
+ * ea_write - writes the request info to an ea, creating new blocks if
+ * necessary
+ * @ip: inode that is being modified
+ * @ea: the location of the new ea in a block
+ * @er: the write request
+ *
+ * Note: does not update ea_rec_len or the GFS2_EAFLAG_LAST bin of ea_flags
+ *
+ * returns : errno
+ */
+
+static int ea_write(struct gfs2_inode *ip, struct gfs2_ea_header *ea,
+ struct gfs2_ea_request *er)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ int error;
+
+ ea->ea_data_len = cpu_to_be32(er->er_data_len);
+ ea->ea_name_len = er->er_name_len;
+ ea->ea_type = er->er_type;
+ ea->__pad = 0;
+
+ memcpy(GFS2_EA2NAME(ea), er->er_name, er->er_name_len);
+
+ if (GFS2_EAREQ_SIZE_STUFFED(er) <= sdp->sd_jbsize) {
+ ea->ea_num_ptrs = 0;
+ memcpy(GFS2_EA2DATA(ea), er->er_data, er->er_data_len);
+ } else {
+ __be64 *dataptr = GFS2_EA2DATAPTRS(ea);
+ const char *data = er->er_data;
+ unsigned int data_len = er->er_data_len;
+ unsigned int copy;
+ unsigned int x;
+
+ ea->ea_num_ptrs = DIV_ROUND_UP(er->er_data_len, sdp->sd_jbsize);
+ for (x = 0; x < ea->ea_num_ptrs; x++) {
+ struct buffer_head *bh;
+ u64 block;
+ int mh_size = sizeof(struct gfs2_meta_header);
+ unsigned int n = 1;
+
+ error = gfs2_alloc_block(ip, &block, &n);
+ if (error)
+ return error;
+ gfs2_trans_add_unrevoke(sdp, block, 1);
+ bh = gfs2_meta_new(ip->i_gl, block);
+ gfs2_trans_add_bh(ip->i_gl, bh, 1);
+ gfs2_metatype_set(bh, GFS2_METATYPE_ED, GFS2_FORMAT_ED);
+
+ gfs2_add_inode_blocks(&ip->i_inode, 1);
+
+ copy = data_len > sdp->sd_jbsize ? sdp->sd_jbsize :
+ data_len;
+ memcpy(bh->b_data + mh_size, data, copy);
+ if (copy < sdp->sd_jbsize)
+ memset(bh->b_data + mh_size + copy, 0,
+ sdp->sd_jbsize - copy);
+
+ *dataptr++ = cpu_to_be64(bh->b_blocknr);
+ data += copy;
+ data_len -= copy;
+
+ brelse(bh);
+ }
+
+ gfs2_assert_withdraw(sdp, !data_len);
+ }
+
+ return 0;
+}
+
+typedef int (*ea_skeleton_call_t) (struct gfs2_inode *ip,
+ struct gfs2_ea_request *er, void *private);
+
+static int ea_alloc_skeleton(struct gfs2_inode *ip, struct gfs2_ea_request *er,
+ unsigned int blks,
+ ea_skeleton_call_t skeleton_call, void *private)
+{
+ struct gfs2_alloc *al;
+ struct buffer_head *dibh;
+ int error;
+
+ al = gfs2_alloc_get(ip);
+ if (!al)
+ return -ENOMEM;
+
+ error = gfs2_quota_lock_check(ip);
+ if (error)
+ goto out;
+
+ al->al_requested = blks;
+
+ error = gfs2_inplace_reserve(ip);
+ if (error)
+ goto out_gunlock_q;
+
+ error = gfs2_trans_begin(GFS2_SB(&ip->i_inode),
+ blks + al->al_rgd->rd_length +
+ RES_DINODE + RES_STATFS + RES_QUOTA, 0);
+ if (error)
+ goto out_ipres;
+
+ error = skeleton_call(ip, er, private);
+ if (error)
+ goto out_end_trans;
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (!error) {
+ ip->i_inode.i_ctime = CURRENT_TIME;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+out_end_trans:
+ gfs2_trans_end(GFS2_SB(&ip->i_inode));
+out_ipres:
+ gfs2_inplace_release(ip);
+out_gunlock_q:
+ gfs2_quota_unlock(ip);
+out:
+ gfs2_alloc_put(ip);
+ return error;
+}
+
+static int ea_init_i(struct gfs2_inode *ip, struct gfs2_ea_request *er,
+ void *private)
+{
+ struct buffer_head *bh;
+ int error;
+
+ error = ea_alloc_blk(ip, &bh);
+ if (error)
+ return error;
+
+ ip->i_eattr = bh->b_blocknr;
+ error = ea_write(ip, GFS2_EA_BH2FIRST(bh), er);
+
+ brelse(bh);
+
+ return error;
+}
+
+/**
+ * ea_init - initializes a new eattr block
+ * @ip:
+ * @er:
+ *
+ * Returns: errno
+ */
+
+static int ea_init(struct gfs2_inode *ip, int type, const char *name,
+ const void *data, size_t size)
+{
+ struct gfs2_ea_request er;
+ unsigned int jbsize = GFS2_SB(&ip->i_inode)->sd_jbsize;
+ unsigned int blks = 1;
+
+ er.er_type = type;
+ er.er_name = name;
+ er.er_name_len = strlen(name);
+ er.er_data = (void *)data;
+ er.er_data_len = size;
+
+ if (GFS2_EAREQ_SIZE_STUFFED(&er) > jbsize)
+ blks += DIV_ROUND_UP(er.er_data_len, jbsize);
+
+ return ea_alloc_skeleton(ip, &er, blks, ea_init_i, NULL);
+}
+
+static struct gfs2_ea_header *ea_split_ea(struct gfs2_ea_header *ea)
+{
+ u32 ea_size = GFS2_EA_SIZE(ea);
+ struct gfs2_ea_header *new = (struct gfs2_ea_header *)((char *)ea +
+ ea_size);
+ u32 new_size = GFS2_EA_REC_LEN(ea) - ea_size;
+ int last = ea->ea_flags & GFS2_EAFLAG_LAST;
+
+ ea->ea_rec_len = cpu_to_be32(ea_size);
+ ea->ea_flags ^= last;
+
+ new->ea_rec_len = cpu_to_be32(new_size);
+ new->ea_flags = last;
+
+ return new;
+}
+
+static void ea_set_remove_stuffed(struct gfs2_inode *ip,
+ struct gfs2_ea_location *el)
+{
+ struct gfs2_ea_header *ea = el->el_ea;
+ struct gfs2_ea_header *prev = el->el_prev;
+ u32 len;
+
+ gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
+
+ if (!prev || !GFS2_EA_IS_STUFFED(ea)) {
+ ea->ea_type = GFS2_EATYPE_UNUSED;
+ return;
+ } else if (GFS2_EA2NEXT(prev) != ea) {
+ prev = GFS2_EA2NEXT(prev);
+ gfs2_assert_withdraw(GFS2_SB(&ip->i_inode), GFS2_EA2NEXT(prev) == ea);
+ }
+
+ len = GFS2_EA_REC_LEN(prev) + GFS2_EA_REC_LEN(ea);
+ prev->ea_rec_len = cpu_to_be32(len);
+
+ if (GFS2_EA_IS_LAST(ea))
+ prev->ea_flags |= GFS2_EAFLAG_LAST;
+}
+
+struct ea_set {
+ int ea_split;
+
+ struct gfs2_ea_request *es_er;
+ struct gfs2_ea_location *es_el;
+
+ struct buffer_head *es_bh;
+ struct gfs2_ea_header *es_ea;
+};
+
+static int ea_set_simple_noalloc(struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea, struct ea_set *es)
+{
+ struct gfs2_ea_request *er = es->es_er;
+ struct buffer_head *dibh;
+ int error;
+
+ error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + 2 * RES_EATTR, 0);
+ if (error)
+ return error;
+
+ gfs2_trans_add_bh(ip->i_gl, bh, 1);
+
+ if (es->ea_split)
+ ea = ea_split_ea(ea);
+
+ ea_write(ip, ea, er);
+
+ if (es->es_el)
+ ea_set_remove_stuffed(ip, es->es_el);
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error)
+ goto out;
+ ip->i_inode.i_ctime = CURRENT_TIME;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+out:
+ gfs2_trans_end(GFS2_SB(&ip->i_inode));
+ return error;
+}
+
+static int ea_set_simple_alloc(struct gfs2_inode *ip,
+ struct gfs2_ea_request *er, void *private)
+{
+ struct ea_set *es = private;
+ struct gfs2_ea_header *ea = es->es_ea;
+ int error;
+
+ gfs2_trans_add_bh(ip->i_gl, es->es_bh, 1);
+
+ if (es->ea_split)
+ ea = ea_split_ea(ea);
+
+ error = ea_write(ip, ea, er);
+ if (error)
+ return error;
+
+ if (es->es_el)
+ ea_set_remove_stuffed(ip, es->es_el);
+
+ return 0;
+}
+
+static int ea_set_simple(struct gfs2_inode *ip, struct buffer_head *bh,
+ struct gfs2_ea_header *ea, struct gfs2_ea_header *prev,
+ void *private)
+{
+ struct ea_set *es = private;
+ unsigned int size;
+ int stuffed;
+ int error;
+
+ stuffed = ea_calc_size(GFS2_SB(&ip->i_inode), es->es_er->er_name_len,
+ es->es_er->er_data_len, &size);
+
+ if (ea->ea_type == GFS2_EATYPE_UNUSED) {
+ if (GFS2_EA_REC_LEN(ea) < size)
+ return 0;
+ if (!GFS2_EA_IS_STUFFED(ea)) {
+ error = ea_remove_unstuffed(ip, bh, ea, prev, 1);
+ if (error)
+ return error;
+ }
+ es->ea_split = 0;
+ } else if (GFS2_EA_REC_LEN(ea) - GFS2_EA_SIZE(ea) >= size)
+ es->ea_split = 1;
+ else
+ return 0;
+
+ if (stuffed) {
+ error = ea_set_simple_noalloc(ip, bh, ea, es);
+ if (error)
+ return error;
+ } else {
+ unsigned int blks;
+
+ es->es_bh = bh;
+ es->es_ea = ea;
+ blks = 2 + DIV_ROUND_UP(es->es_er->er_data_len,
+ GFS2_SB(&ip->i_inode)->sd_jbsize);
+
+ error = ea_alloc_skeleton(ip, es->es_er, blks,
+ ea_set_simple_alloc, es);
+ if (error)
+ return error;
+ }
+
+ return 1;
+}
+
+static int ea_set_block(struct gfs2_inode *ip, struct gfs2_ea_request *er,
+ void *private)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head *indbh, *newbh;
+ __be64 *eablk;
+ int error;
+ int mh_size = sizeof(struct gfs2_meta_header);
+
+ if (ip->i_diskflags & GFS2_DIF_EA_INDIRECT) {
+ __be64 *end;
+
+ error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT,
+ &indbh);
+ if (error)
+ return error;
+
+ if (gfs2_metatype_check(sdp, indbh, GFS2_METATYPE_IN)) {
+ error = -EIO;
+ goto out;
+ }
+
+ eablk = (__be64 *)(indbh->b_data + mh_size);
+ end = eablk + sdp->sd_inptrs;
+
+ for (; eablk < end; eablk++)
+ if (!*eablk)
+ break;
+
+ if (eablk == end) {
+ error = -ENOSPC;
+ goto out;
+ }
+
+ gfs2_trans_add_bh(ip->i_gl, indbh, 1);
+ } else {
+ u64 blk;
+ unsigned int n = 1;
+ error = gfs2_alloc_block(ip, &blk, &n);
+ if (error)
+ return error;
+ gfs2_trans_add_unrevoke(sdp, blk, 1);
+ indbh = gfs2_meta_new(ip->i_gl, blk);
+ gfs2_trans_add_bh(ip->i_gl, indbh, 1);
+ gfs2_metatype_set(indbh, GFS2_METATYPE_IN, GFS2_FORMAT_IN);
+ gfs2_buffer_clear_tail(indbh, mh_size);
+
+ eablk = (__be64 *)(indbh->b_data + mh_size);
+ *eablk = cpu_to_be64(ip->i_eattr);
+ ip->i_eattr = blk;
+ ip->i_diskflags |= GFS2_DIF_EA_INDIRECT;
+ gfs2_add_inode_blocks(&ip->i_inode, 1);
+
+ eablk++;
+ }
+
+ error = ea_alloc_blk(ip, &newbh);
+ if (error)
+ goto out;
+
+ *eablk = cpu_to_be64((u64)newbh->b_blocknr);
+ error = ea_write(ip, GFS2_EA_BH2FIRST(newbh), er);
+ brelse(newbh);
+ if (error)
+ goto out;
+
+ if (private)
+ ea_set_remove_stuffed(ip, private);
+
+out:
+ brelse(indbh);
+ return error;
+}
+
+static int ea_set_i(struct gfs2_inode *ip, int type, const char *name,
+ const void *value, size_t size, struct gfs2_ea_location *el)
+{
+ struct gfs2_ea_request er;
+ struct ea_set es;
+ unsigned int blks = 2;
+ int error;
+
+ er.er_type = type;
+ er.er_name = name;
+ er.er_data = (void *)value;
+ er.er_name_len = strlen(name);
+ er.er_data_len = size;
+
+ memset(&es, 0, sizeof(struct ea_set));
+ es.es_er = &er;
+ es.es_el = el;
+
+ error = ea_foreach(ip, ea_set_simple, &es);
+ if (error > 0)
+ return 0;
+ if (error)
+ return error;
+
+ if (!(ip->i_diskflags & GFS2_DIF_EA_INDIRECT))
+ blks++;
+ if (GFS2_EAREQ_SIZE_STUFFED(&er) > GFS2_SB(&ip->i_inode)->sd_jbsize)
+ blks += DIV_ROUND_UP(er.er_data_len, GFS2_SB(&ip->i_inode)->sd_jbsize);
+
+ return ea_alloc_skeleton(ip, &er, blks, ea_set_block, el);
+}
+
+static int ea_set_remove_unstuffed(struct gfs2_inode *ip,
+ struct gfs2_ea_location *el)
+{
+ if (el->el_prev && GFS2_EA2NEXT(el->el_prev) != el->el_ea) {
+ el->el_prev = GFS2_EA2NEXT(el->el_prev);
+ gfs2_assert_withdraw(GFS2_SB(&ip->i_inode),
+ GFS2_EA2NEXT(el->el_prev) == el->el_ea);
+ }
+
+ return ea_remove_unstuffed(ip, el->el_bh, el->el_ea, el->el_prev, 0);
+}
+
+static int ea_remove_stuffed(struct gfs2_inode *ip, struct gfs2_ea_location *el)
+{
+ struct gfs2_ea_header *ea = el->el_ea;
+ struct gfs2_ea_header *prev = el->el_prev;
+ struct buffer_head *dibh;
+ int error;
+
+ error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
+ if (error)
+ return error;
+
+ gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
+
+ if (prev) {
+ u32 len;
+
+ len = GFS2_EA_REC_LEN(prev) + GFS2_EA_REC_LEN(ea);
+ prev->ea_rec_len = cpu_to_be32(len);
+
+ if (GFS2_EA_IS_LAST(ea))
+ prev->ea_flags |= GFS2_EAFLAG_LAST;
+ } else {
+ ea->ea_type = GFS2_EATYPE_UNUSED;
+ }
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (!error) {
+ ip->i_inode.i_ctime = CURRENT_TIME;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+ gfs2_trans_end(GFS2_SB(&ip->i_inode));
+
+ return error;
+}
+
+/**
+ * gfs2_xattr_remove - Remove a GFS2 extended attribute
+ * @inode: The inode
+ * @type: The type of the extended attribute
+ * @name: The name of the extended attribute
+ *
+ * This is not called directly by the VFS since we use the (common)
+ * scheme of making a "set with NULL data" mean a remove request. Note
+ * that this is different from a set with zero length data.
+ *
+ * Returns: 0, or errno on failure
+ */
+
+static int gfs2_xattr_remove(struct inode *inode, int type, const char *name)
+{
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_ea_location el;
+ int error;
+
+ if (!ip->i_eattr)
+ return -ENODATA;
+
+ error = gfs2_ea_find(ip, type, name, &el);
+ if (error)
+ return error;
+ if (!el.el_ea)
+ return -ENODATA;
+
+ if (GFS2_EA_IS_STUFFED(el.el_ea))
+ error = ea_remove_stuffed(ip, &el);
+ else
+ error = ea_remove_unstuffed(ip, el.el_bh, el.el_ea, el.el_prev, 0);
+
+ brelse(el.el_bh);
+
+ return error;
+}
+
+/**
+ * gfs2_xattr_set - Set (or remove) a GFS2 extended attribute
+ * @inode: The inode
+ * @type: The type of the extended attribute
+ * @name: The name of the extended attribute
+ * @value: The value of the extended attribute (NULL for remove)
+ * @size: The size of the @value argument
+ * @flags: Create or Replace
+ *
+ * See gfs2_xattr_remove() for details of the removal of xattrs.
+ *
+ * Returns: 0 or errno on failure
+ */
+
+int gfs2_xattr_set(struct inode *inode, int type, const char *name,
+ const void *value, size_t size, int flags)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_ea_location el;
+ unsigned int namel = strlen(name);
+ int error;
+
+ if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+ return -EPERM;
+ if (namel > GFS2_EA_MAX_NAME_LEN)
+ return -ERANGE;
+
+ if (value == NULL)
+ return gfs2_xattr_remove(inode, type, name);
+
+ if (ea_check_size(sdp, namel, size))
+ return -ERANGE;
+
+ if (!ip->i_eattr) {
+ if (flags & XATTR_REPLACE)
+ return -ENODATA;
+ return ea_init(ip, type, name, value, size);
+ }
+
+ error = gfs2_ea_find(ip, type, name, &el);
+ if (error)
+ return error;
+
+ if (el.el_ea) {
+ if (ip->i_diskflags & GFS2_DIF_APPENDONLY) {
+ brelse(el.el_bh);
+ return -EPERM;
+ }
+
+ error = -EEXIST;
+ if (!(flags & XATTR_CREATE)) {
+ int unstuffed = !GFS2_EA_IS_STUFFED(el.el_ea);
+ error = ea_set_i(ip, type, name, value, size, &el);
+ if (!error && unstuffed)
+ ea_set_remove_unstuffed(ip, &el);
+ }
+
+ brelse(el.el_bh);
+ return error;
+ }
+
+ error = -ENODATA;
+ if (!(flags & XATTR_REPLACE))
+ error = ea_set_i(ip, type, name, value, size, NULL);
+
+ return error;
+}
+
+static int ea_acl_chmod_unstuffed(struct gfs2_inode *ip,
+ struct gfs2_ea_header *ea, char *data)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head **bh;
+ unsigned int amount = GFS2_EA_DATA_LEN(ea);
+ unsigned int nptrs = DIV_ROUND_UP(amount, sdp->sd_jbsize);
+ __be64 *dataptrs = GFS2_EA2DATAPTRS(ea);
+ unsigned int x;
+ int error;
+
+ bh = kcalloc(nptrs, sizeof(struct buffer_head *), GFP_NOFS);
+ if (!bh)
+ return -ENOMEM;
+
+ error = gfs2_trans_begin(sdp, nptrs + RES_DINODE, 0);
+ if (error)
+ goto out;
+
+ for (x = 0; x < nptrs; x++) {
+ error = gfs2_meta_read(ip->i_gl, be64_to_cpu(*dataptrs), 0,
+ bh + x);
+ if (error) {
+ while (x--)
+ brelse(bh[x]);
+ goto fail;
+ }
+ dataptrs++;
+ }
+
+ for (x = 0; x < nptrs; x++) {
+ error = gfs2_meta_wait(sdp, bh[x]);
+ if (error) {
+ for (; x < nptrs; x++)
+ brelse(bh[x]);
+ goto fail;
+ }
+ if (gfs2_metatype_check(sdp, bh[x], GFS2_METATYPE_ED)) {
+ for (; x < nptrs; x++)
+ brelse(bh[x]);
+ error = -EIO;
+ goto fail;
+ }
+
+ gfs2_trans_add_bh(ip->i_gl, bh[x], 1);
+
+ memcpy(bh[x]->b_data + sizeof(struct gfs2_meta_header), data,
+ (sdp->sd_jbsize > amount) ? amount : sdp->sd_jbsize);
+
+ amount -= sdp->sd_jbsize;
+ data += sdp->sd_jbsize;
+
+ brelse(bh[x]);
+ }
+
+out:
+ kfree(bh);
+ return error;
+
+fail:
+ gfs2_trans_end(sdp);
+ kfree(bh);
+ return error;
+}
+
+int gfs2_ea_acl_chmod(struct gfs2_inode *ip, struct gfs2_ea_location *el,
+ struct iattr *attr, char *data)
+{
+ struct buffer_head *dibh;
+ int error;
+
+ if (GFS2_EA_IS_STUFFED(el->el_ea)) {
+ error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
+ if (error)
+ return error;
+
+ gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
+ memcpy(GFS2_EA2DATA(el->el_ea), data,
+ GFS2_EA_DATA_LEN(el->el_ea));
+ } else
+ error = ea_acl_chmod_unstuffed(ip, el->el_ea, data);
+
+ if (error)
+ return error;
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (!error) {
+ error = inode_setattr(&ip->i_inode, attr);
+ gfs2_assert_warn(GFS2_SB(&ip->i_inode), !error);
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+ gfs2_trans_end(GFS2_SB(&ip->i_inode));
+
+ return error;
+}
+
+static int ea_dealloc_indirect(struct gfs2_inode *ip)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct gfs2_rgrp_list rlist;
+ struct buffer_head *indbh, *dibh;
+ __be64 *eablk, *end;
+ unsigned int rg_blocks = 0;
+ u64 bstart = 0;
+ unsigned int blen = 0;
+ unsigned int blks = 0;
+ unsigned int x;
+ int error;
+
+ memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
+
+ error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT, &indbh);
+ if (error)
+ return error;
+
+ if (gfs2_metatype_check(sdp, indbh, GFS2_METATYPE_IN)) {
+ error = -EIO;
+ goto out;
+ }
+
+ eablk = (__be64 *)(indbh->b_data + sizeof(struct gfs2_meta_header));
+ end = eablk + sdp->sd_inptrs;
+
+ for (; eablk < end; eablk++) {
+ u64 bn;
+
+ if (!*eablk)
+ break;
+ bn = be64_to_cpu(*eablk);
+
+ if (bstart + blen == bn)
+ blen++;
+ else {
+ if (bstart)
+ gfs2_rlist_add(sdp, &rlist, bstart);
+ bstart = bn;
+ blen = 1;
+ }
+ blks++;
+ }
+ if (bstart)
+ gfs2_rlist_add(sdp, &rlist, bstart);
+ else
+ goto out;
+
+ gfs2_rlist_alloc(&rlist, LM_ST_EXCLUSIVE);
+
+ for (x = 0; x < rlist.rl_rgrps; x++) {
+ struct gfs2_rgrpd *rgd;
+ rgd = rlist.rl_ghs[x].gh_gl->gl_object;
+ rg_blocks += rgd->rd_length;
+ }
+
+ error = gfs2_glock_nq_m(rlist.rl_rgrps, rlist.rl_ghs);
+ if (error)
+ goto out_rlist_free;
+
+ error = gfs2_trans_begin(sdp, rg_blocks + RES_DINODE + RES_INDIRECT +
+ RES_STATFS + RES_QUOTA, blks);
+ if (error)
+ goto out_gunlock;
+
+ gfs2_trans_add_bh(ip->i_gl, indbh, 1);
+
+ eablk = (__be64 *)(indbh->b_data + sizeof(struct gfs2_meta_header));
+ bstart = 0;
+ blen = 0;
+
+ for (; eablk < end; eablk++) {
+ u64 bn;
+
+ if (!*eablk)
+ break;
+ bn = be64_to_cpu(*eablk);
+
+ if (bstart + blen == bn)
+ blen++;
+ else {
+ if (bstart)
+ gfs2_free_meta(ip, bstart, blen);
+ bstart = bn;
+ blen = 1;
+ }
+
+ *eablk = 0;
+ gfs2_add_inode_blocks(&ip->i_inode, -1);
+ }
+ if (bstart)
+ gfs2_free_meta(ip, bstart, blen);
+
+ ip->i_diskflags &= ~GFS2_DIF_EA_INDIRECT;
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (!error) {
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+ gfs2_trans_end(sdp);
+
+out_gunlock:
+ gfs2_glock_dq_m(rlist.rl_rgrps, rlist.rl_ghs);
+out_rlist_free:
+ gfs2_rlist_free(&rlist);
+out:
+ brelse(indbh);
+ return error;
+}
+
+static int ea_dealloc_block(struct gfs2_inode *ip)
+{
+ struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct gfs2_alloc *al = ip->i_alloc;
+ struct gfs2_rgrpd *rgd;
+ struct buffer_head *dibh;
+ int error;
+
+ rgd = gfs2_blk2rgrpd(sdp, ip->i_eattr);
+ if (!rgd) {
+ gfs2_consist_inode(ip);
+ return -EIO;
+ }
+
+ error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0,
+ &al->al_rgd_gh);
+ if (error)
+ return error;
+
+ error = gfs2_trans_begin(sdp, RES_RG_BIT + RES_DINODE + RES_STATFS +
+ RES_QUOTA, 1);
+ if (error)
+ goto out_gunlock;
+
+ gfs2_free_meta(ip, ip->i_eattr, 1);
+
+ ip->i_eattr = 0;
+ gfs2_add_inode_blocks(&ip->i_inode, -1);
+
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (!error) {
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ gfs2_dinode_out(ip, dibh->b_data);
+ brelse(dibh);
+ }
+
+ gfs2_trans_end(sdp);
+
+out_gunlock:
+ gfs2_glock_dq_uninit(&al->al_rgd_gh);
+ return error;
+}
+
+/**
+ * gfs2_ea_dealloc - deallocate the extended attribute fork
+ * @ip: the inode
+ *
+ * Returns: errno
+ */
+
+int gfs2_ea_dealloc(struct gfs2_inode *ip)
+{
+ struct gfs2_alloc *al;
+ int error;
+
+ al = gfs2_alloc_get(ip);
+ if (!al)
+ return -ENOMEM;
+
+ error = gfs2_quota_hold(ip, NO_QUOTA_CHANGE, NO_QUOTA_CHANGE);
+ if (error)
+ goto out_alloc;
+
+ error = gfs2_rindex_hold(GFS2_SB(&ip->i_inode), &al->al_ri_gh);
+ if (error)
+ goto out_quota;
+
+ error = ea_foreach(ip, ea_dealloc_unstuffed, NULL);
+ if (error)
+ goto out_rindex;
+
+ if (ip->i_diskflags & GFS2_DIF_EA_INDIRECT) {
+ error = ea_dealloc_indirect(ip);
+ if (error)
+ goto out_rindex;
+ }
+
+ error = ea_dealloc_block(ip);
+
+out_rindex:
+ gfs2_glock_dq_uninit(&al->al_ri_gh);
+out_quota:
+ gfs2_quota_unhold(ip);
+out_alloc:
+ gfs2_alloc_put(ip);
+ return error;
+}
+
+static int gfs2_xattr_user_get(struct inode *inode, const char *name,
+ void *buffer, size_t size)
+{
+ return gfs2_xattr_get(inode, GFS2_EATYPE_USR, name, buffer, size);
+}
+
+static int gfs2_xattr_user_set(struct inode *inode, const char *name,
+ const void *value, size_t size, int flags)
+{
+ return gfs2_xattr_set(inode, GFS2_EATYPE_USR, name, value, size, flags);
+}
+
+static int gfs2_xattr_system_get(struct inode *inode, const char *name,
+ void *buffer, size_t size)
+{
+ return gfs2_xattr_get(inode, GFS2_EATYPE_SYS, name, buffer, size);
+}
+
+static int gfs2_xattr_system_set(struct inode *inode, const char *name,
+ const void *value, size_t size, int flags)
+{
+ return gfs2_xattr_set(inode, GFS2_EATYPE_SYS, name, value, size, flags);
+}
+
+static int gfs2_xattr_security_get(struct inode *inode, const char *name,
+ void *buffer, size_t size)
+{
+ return gfs2_xattr_get(inode, GFS2_EATYPE_SECURITY, name, buffer, size);
+}
+
+static int gfs2_xattr_security_set(struct inode *inode, const char *name,
+ const void *value, size_t size, int flags)
+{
+ return gfs2_xattr_set(inode, GFS2_EATYPE_SECURITY, name, value, size, flags);
+}
+
+static struct xattr_handler gfs2_xattr_user_handler = {
+ .prefix = XATTR_USER_PREFIX,
+ .get = gfs2_xattr_user_get,
+ .set = gfs2_xattr_user_set,
+};
+
+static struct xattr_handler gfs2_xattr_security_handler = {
+ .prefix = XATTR_SECURITY_PREFIX,
+ .get = gfs2_xattr_security_get,
+ .set = gfs2_xattr_security_set,
+};
+
+static struct xattr_handler gfs2_xattr_system_handler = {
+ .prefix = XATTR_SYSTEM_PREFIX,
+ .get = gfs2_xattr_system_get,
+ .set = gfs2_xattr_system_set,
+};
+
+struct xattr_handler *gfs2_xattr_handlers[] = {
+ &gfs2_xattr_user_handler,
+ &gfs2_xattr_security_handler,
+ &gfs2_xattr_system_handler,
+ NULL,
+};
+
diff --git a/fs/gfs2/xattr.h b/fs/gfs2/xattr.h
new file mode 100644
index 0000000..cbdfd77
--- /dev/null
+++ b/fs/gfs2/xattr.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
+ * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License version 2.
+ */
+
+#ifndef __EATTR_DOT_H__
+#define __EATTR_DOT_H__
+
+struct gfs2_inode;
+struct iattr;
+
+#define GFS2_EA_REC_LEN(ea) be32_to_cpu((ea)->ea_rec_len)
+#define GFS2_EA_DATA_LEN(ea) be32_to_cpu((ea)->ea_data_len)
+
+#define GFS2_EA_SIZE(ea) \
+ALIGN(sizeof(struct gfs2_ea_header) + (ea)->ea_name_len + \
+ ((GFS2_EA_IS_STUFFED(ea)) ? GFS2_EA_DATA_LEN(ea) : \
+ (sizeof(__be64) * (ea)->ea_num_ptrs)), 8)
+
+#define GFS2_EA_IS_STUFFED(ea) (!(ea)->ea_num_ptrs)
+#define GFS2_EA_IS_LAST(ea) ((ea)->ea_flags & GFS2_EAFLAG_LAST)
+
+#define GFS2_EAREQ_SIZE_STUFFED(er) \
+ALIGN(sizeof(struct gfs2_ea_header) + (er)->er_name_len + (er)->er_data_len, 8)
+
+#define GFS2_EA2NAME(ea) ((char *)((struct gfs2_ea_header *)(ea) + 1))
+#define GFS2_EA2DATA(ea) (GFS2_EA2NAME(ea) + (ea)->ea_name_len)
+
+#define GFS2_EA2DATAPTRS(ea) \
+((__be64 *)(GFS2_EA2NAME(ea) + ALIGN((ea)->ea_name_len, 8)))
+
+#define GFS2_EA2NEXT(ea) \
+((struct gfs2_ea_header *)((char *)(ea) + GFS2_EA_REC_LEN(ea)))
+
+#define GFS2_EA_BH2FIRST(bh) \
+((struct gfs2_ea_header *)((bh)->b_data + sizeof(struct gfs2_meta_header)))
+
+struct gfs2_ea_request {
+ const char *er_name;
+ char *er_data;
+ unsigned int er_name_len;
+ unsigned int er_data_len;
+ unsigned int er_type; /* GFS2_EATYPE_... */
+};
+
+struct gfs2_ea_location {
+ struct buffer_head *el_bh;
+ struct gfs2_ea_header *el_ea;
+ struct gfs2_ea_header *el_prev;
+};
+
+extern int gfs2_xattr_get(struct inode *inode, int type, const char *name,
+ void *buffer, size_t size);
+extern int gfs2_xattr_set(struct inode *inode, int type, const char *name,
+ const void *value, size_t size, int flags);
+extern ssize_t gfs2_listxattr(struct dentry *dentry, char *buffer, size_t size);
+extern int gfs2_ea_dealloc(struct gfs2_inode *ip);
+
+/* Exported to acl.c */
+
+extern int gfs2_ea_find(struct gfs2_inode *ip, int type, const char *name,
+ struct gfs2_ea_location *el);
+extern int gfs2_ea_get_copy(struct gfs2_inode *ip, struct gfs2_ea_location *el,
+ char *data, size_t size);
+extern int gfs2_ea_acl_chmod(struct gfs2_inode *ip, struct gfs2_ea_location *el,
+ struct iattr *attr, char *data);
+
+#endif /* __EATTR_DOT_H__ */
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 941c842..a93b885 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -44,6 +44,7 @@
static const struct inode_operations hugetlbfs_inode_operations;
static struct backing_dev_info hugetlbfs_backing_dev_info = {
+ .name = "hugetlbfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
@@ -935,26 +936,28 @@
return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
-struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag)
+struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
+ struct user_struct **user)
{
int error = -ENOMEM;
- int unlock_shm = 0;
struct file *file;
struct inode *inode;
struct dentry *dentry, *root;
struct qstr quick_string;
- struct user_struct *user = current_user();
+ *user = NULL;
if (!hugetlbfs_vfsmount)
return ERR_PTR(-ENOENT);
if (!can_do_hugetlb_shm()) {
- if (user_shm_lock(size, user)) {
- unlock_shm = 1;
+ *user = current_user();
+ if (user_shm_lock(size, *user)) {
WARN_ONCE(1,
"Using mlock ulimits for SHM_HUGETLB deprecated\n");
- } else
+ } else {
+ *user = NULL;
return ERR_PTR(-EPERM);
+ }
}
root = hugetlbfs_vfsmount->mnt_root;
@@ -996,8 +999,10 @@
out_dentry:
dput(dentry);
out_shm_unlock:
- if (unlock_shm)
- user_shm_unlock(size, user);
+ if (*user) {
+ user_shm_unlock(size, *user);
+ *user = NULL;
+ }
return ERR_PTR(error);
}
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 8fcb62392..7edb62e 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -258,7 +258,7 @@
return rc;
}
-static int jffs2_check_acl(struct inode *inode, int mask)
+int jffs2_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl;
int rc;
@@ -274,11 +274,6 @@
return -EAGAIN;
}
-int jffs2_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, jffs2_check_acl);
-}
-
int jffs2_init_acl_pre(struct inode *dir_i, struct inode *inode, int *i_mode)
{
struct posix_acl *acl, *clone;
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
index fc929f2..f0ba63e 100644
--- a/fs/jffs2/acl.h
+++ b/fs/jffs2/acl.h
@@ -26,7 +26,7 @@
#ifdef CONFIG_JFFS2_FS_POSIX_ACL
-extern int jffs2_permission(struct inode *, int);
+extern int jffs2_check_acl(struct inode *, int);
extern int jffs2_acl_chmod(struct inode *);
extern int jffs2_init_acl_pre(struct inode *, struct inode *, int *);
extern int jffs2_init_acl_post(struct inode *);
@@ -36,7 +36,7 @@
#else
-#define jffs2_permission (NULL)
+#define jffs2_check_acl (NULL)
#define jffs2_acl_chmod(inode) (0)
#define jffs2_init_acl_pre(dir_i,inode,mode) (0)
#define jffs2_init_acl_post(inode) (0)
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 6f60cc9..7aa4417 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -55,7 +55,7 @@
.rmdir = jffs2_rmdir,
.mknod = jffs2_mknod,
.rename = jffs2_rename,
- .permission = jffs2_permission,
+ .check_acl = jffs2_check_acl,
.setattr = jffs2_setattr,
.setxattr = jffs2_setxattr,
.getxattr = jffs2_getxattr,
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 23c9475..b7b74e2 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -56,7 +56,7 @@
const struct inode_operations jffs2_file_inode_operations =
{
- .permission = jffs2_permission,
+ .check_acl = jffs2_check_acl,
.setattr = jffs2_setattr,
.setxattr = jffs2_setxattr,
.getxattr = jffs2_getxattr,
diff --git a/fs/jffs2/symlink.c b/fs/jffs2/symlink.c
index b7339c3..4ec11e8 100644
--- a/fs/jffs2/symlink.c
+++ b/fs/jffs2/symlink.c
@@ -21,7 +21,7 @@
{
.readlink = generic_readlink,
.follow_link = jffs2_follow_link,
- .permission = jffs2_permission,
+ .check_acl = jffs2_check_acl,
.setattr = jffs2_setattr,
.setxattr = jffs2_setxattr,
.getxattr = jffs2_getxattr,
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index d9a721e..5ef7bac 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -1268,10 +1268,20 @@
if (!c->wbuf)
return -ENOMEM;
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf_verify) {
+ kfree(c->wbuf);
+ return -ENOMEM;
+ }
+#endif
return 0;
}
void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c) {
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+ kfree(c->wbuf_verify);
+#endif
kfree(c->wbuf);
}
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index a29c7c3..d66477c 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -114,7 +114,7 @@
return rc;
}
-static int jfs_check_acl(struct inode *inode, int mask)
+int jfs_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = jfs_get_acl(inode, ACL_TYPE_ACCESS);
@@ -129,11 +129,6 @@
return -EAGAIN;
}
-int jfs_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, jfs_check_acl);
-}
-
int jfs_init_acl(tid_t tid, struct inode *inode, struct inode *dir)
{
struct posix_acl *acl = NULL;
diff --git a/fs/jfs/file.c b/fs/jfs/file.c
index 7f6063a..2b70fa7 100644
--- a/fs/jfs/file.c
+++ b/fs/jfs/file.c
@@ -96,7 +96,7 @@
.removexattr = jfs_removexattr,
#ifdef CONFIG_JFS_POSIX_ACL
.setattr = jfs_setattr,
- .permission = jfs_permission,
+ .check_acl = jfs_check_acl,
#endif
};
diff --git a/fs/jfs/jfs_acl.h b/fs/jfs/jfs_acl.h
index 88475f1..b07bd41 100644
--- a/fs/jfs/jfs_acl.h
+++ b/fs/jfs/jfs_acl.h
@@ -20,7 +20,7 @@
#ifdef CONFIG_JFS_POSIX_ACL
-int jfs_permission(struct inode *, int);
+int jfs_check_acl(struct inode *, int);
int jfs_init_acl(tid_t, struct inode *, struct inode *);
int jfs_setattr(struct dentry *, struct iattr *);
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index 514ee2e..c79a4270 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -1543,7 +1543,7 @@
.removexattr = jfs_removexattr,
#ifdef CONFIG_JFS_POSIX_ACL
.setattr = jfs_setattr,
- .permission = jfs_permission,
+ .check_acl = jfs_check_acl,
#endif
};
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 99d737b..7cb076a 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -87,18 +87,6 @@
return hash & (NLM_HOST_NRHASH - 1);
}
-static void nlm_clear_port(struct sockaddr *sap)
-{
- switch (sap->sa_family) {
- case AF_INET:
- ((struct sockaddr_in *)sap)->sin_port = 0;
- break;
- case AF_INET6:
- ((struct sockaddr_in6 *)sap)->sin6_port = 0;
- break;
- }
-}
-
/*
* Common host lookup routine for server & client
*/
@@ -177,7 +165,7 @@
host->h_addrbuf = nsm->sm_addrbuf;
memcpy(nlm_addr(host), ni->sap, ni->salen);
host->h_addrlen = ni->salen;
- nlm_clear_port(nlm_addr(host));
+ rpc_set_port(nlm_addr(host), 0);
memcpy(nlm_srcaddr(host), ni->src_sap, ni->src_len);
host->h_version = ni->version;
host->h_proto = ni->protocol;
diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c
index 7fce1b5..30c9331 100644
--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -61,43 +61,6 @@
return (struct sockaddr *)&nsm->sm_addr;
}
-static void nsm_display_ipv4_address(const struct sockaddr *sap, char *buf,
- const size_t len)
-{
- const struct sockaddr_in *sin = (struct sockaddr_in *)sap;
- snprintf(buf, len, "%pI4", &sin->sin_addr.s_addr);
-}
-
-static void nsm_display_ipv6_address(const struct sockaddr *sap, char *buf,
- const size_t len)
-{
- const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
-
- if (ipv6_addr_v4mapped(&sin6->sin6_addr))
- snprintf(buf, len, "%pI4", &sin6->sin6_addr.s6_addr32[3]);
- else if (sin6->sin6_scope_id != 0)
- snprintf(buf, len, "%pI6%%%u", &sin6->sin6_addr,
- sin6->sin6_scope_id);
- else
- snprintf(buf, len, "%pI6", &sin6->sin6_addr);
-}
-
-static void nsm_display_address(const struct sockaddr *sap,
- char *buf, const size_t len)
-{
- switch (sap->sa_family) {
- case AF_INET:
- nsm_display_ipv4_address(sap, buf, len);
- break;
- case AF_INET6:
- nsm_display_ipv6_address(sap, buf, len);
- break;
- default:
- snprintf(buf, len, "unsupported address family");
- break;
- }
-}
-
static struct rpc_clnt *nsm_create(void)
{
struct sockaddr_in sin = {
@@ -307,8 +270,11 @@
memcpy(nsm_addr(new), sap, salen);
new->sm_addrlen = salen;
nsm_init_private(new);
- nsm_display_address((const struct sockaddr *)&new->sm_addr,
- new->sm_addrbuf, sizeof(new->sm_addrbuf));
+
+ if (rpc_ntop(nsm_addr(new), new->sm_addrbuf,
+ sizeof(new->sm_addrbuf)) == 0)
+ (void)snprintf(new->sm_addrbuf, sizeof(new->sm_addrbuf),
+ "unsupported address family");
memcpy(new->sm_name, hostname, hostname_len);
new->sm_name[hostname_len] = '\0';
diff --git a/fs/locks.c b/fs/locks.c
index b6440f5..19ee18a 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -768,7 +768,7 @@
* give it the opportunity to lock the file.
*/
if (found)
- cond_resched_bkl();
+ cond_resched();
find_conflict:
for_each_lock(inode, before) {
@@ -1591,7 +1591,7 @@
if (can_sleep)
lock->fl_flags |= FL_SLEEP;
- error = security_file_lock(filp, cmd);
+ error = security_file_lock(filp, lock->fl_type);
if (error)
goto out_free;
diff --git a/fs/namei.c b/fs/namei.c
index f3c5b27..d11f404 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -169,6 +169,36 @@
EXPORT_SYMBOL(putname);
#endif
+/*
+ * This does basic POSIX ACL permission checking
+ */
+static int acl_permission_check(struct inode *inode, int mask,
+ int (*check_acl)(struct inode *inode, int mask))
+{
+ umode_t mode = inode->i_mode;
+
+ mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
+
+ if (current_fsuid() == inode->i_uid)
+ mode >>= 6;
+ else {
+ if (IS_POSIXACL(inode) && (mode & S_IRWXG) && check_acl) {
+ int error = check_acl(inode, mask);
+ if (error != -EAGAIN)
+ return error;
+ }
+
+ if (in_group_p(inode->i_gid))
+ mode >>= 3;
+ }
+
+ /*
+ * If the DACs are ok we don't need any capability check.
+ */
+ if ((mask & ~mode) == 0)
+ return 0;
+ return -EACCES;
+}
/**
* generic_permission - check for access rights on a Posix-like filesystem
@@ -184,32 +214,15 @@
int generic_permission(struct inode *inode, int mask,
int (*check_acl)(struct inode *inode, int mask))
{
- umode_t mode = inode->i_mode;
-
- mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
-
- if (current_fsuid() == inode->i_uid)
- mode >>= 6;
- else {
- if (IS_POSIXACL(inode) && (mode & S_IRWXG) && check_acl) {
- int error = check_acl(inode, mask);
- if (error == -EACCES)
- goto check_capabilities;
- else if (error != -EAGAIN)
- return error;
- }
-
- if (in_group_p(inode->i_gid))
- mode >>= 3;
- }
+ int ret;
/*
- * If the DACs are ok we don't need any capability check.
+ * Do the basic POSIX ACL permission checks.
*/
- if ((mask & ~mode) == 0)
- return 0;
+ ret = acl_permission_check(inode, mask, check_acl);
+ if (ret != -EACCES)
+ return ret;
- check_capabilities:
/*
* Read/write DACs are always overridable.
* Executable DACs are overridable if at least one exec bit is set.
@@ -262,7 +275,7 @@
if (inode->i_op->permission)
retval = inode->i_op->permission(inode, mask);
else
- retval = generic_permission(inode, mask, NULL);
+ retval = generic_permission(inode, mask, inode->i_op->check_acl);
if (retval)
return retval;
@@ -432,29 +445,22 @@
*/
static int exec_permission_lite(struct inode *inode)
{
- umode_t mode = inode->i_mode;
+ int ret;
- if (inode->i_op->permission)
- return -EAGAIN;
-
- if (current_fsuid() == inode->i_uid)
- mode >>= 6;
- else if (in_group_p(inode->i_gid))
- mode >>= 3;
-
- if (mode & MAY_EXEC)
+ if (inode->i_op->permission) {
+ ret = inode->i_op->permission(inode, MAY_EXEC);
+ if (!ret)
+ goto ok;
+ return ret;
+ }
+ ret = acl_permission_check(inode, MAY_EXEC, inode->i_op->check_acl);
+ if (!ret)
goto ok;
- if ((inode->i_mode & S_IXUGO) && capable(CAP_DAC_OVERRIDE))
+ if (capable(CAP_DAC_OVERRIDE) || capable(CAP_DAC_READ_SEARCH))
goto ok;
- if (S_ISDIR(inode->i_mode) && capable(CAP_DAC_OVERRIDE))
- goto ok;
-
- if (S_ISDIR(inode->i_mode) && capable(CAP_DAC_READ_SEARCH))
- goto ok;
-
- return -EACCES;
+ return ret;
ok:
return security_inode_permission(inode, MAY_EXEC);
}
@@ -853,12 +859,6 @@
nd->flags |= LOOKUP_CONTINUE;
err = exec_permission_lite(inode);
- if (err == -EAGAIN)
- err = inode_permission(nd->path.dentry->d_inode,
- MAY_EXEC);
- if (!err)
- err = ima_path_check(&nd->path, MAY_EXEC,
- IMA_COUNT_UPDATE);
if (err)
break;
@@ -1533,37 +1533,42 @@
if (error)
return error;
- error = ima_path_check(path,
- acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC),
+ error = ima_path_check(path, acc_mode ?
+ acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC) :
+ ACC_MODE(flag) & (MAY_READ | MAY_WRITE),
IMA_COUNT_UPDATE);
+
if (error)
return error;
/*
* An append-only file must be opened in append mode for writing.
*/
if (IS_APPEND(inode)) {
+ error = -EPERM;
if ((flag & FMODE_WRITE) && !(flag & O_APPEND))
- return -EPERM;
+ goto err_out;
if (flag & O_TRUNC)
- return -EPERM;
+ goto err_out;
}
/* O_NOATIME can only be set by the owner or superuser */
if (flag & O_NOATIME)
- if (!is_owner_or_cap(inode))
- return -EPERM;
+ if (!is_owner_or_cap(inode)) {
+ error = -EPERM;
+ goto err_out;
+ }
/*
* Ensure there are no outstanding leases on the file.
*/
error = break_lease(inode, flag);
if (error)
- return error;
+ goto err_out;
if (flag & O_TRUNC) {
error = get_write_access(inode);
if (error)
- return error;
+ goto err_out;
/*
* Refuse to truncate files with mandatory locks held on them.
@@ -1581,12 +1586,17 @@
}
put_write_access(inode);
if (error)
- return error;
+ goto err_out;
} else
if (flag & FMODE_WRITE)
vfs_dq_init(inode);
return 0;
+err_out:
+ ima_counts_put(path, acc_mode ?
+ acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC) :
+ ACC_MODE(flag) & (MAY_READ | MAY_WRITE));
+ return error;
}
/*
diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile
index 8451598..da7fda6 100644
--- a/fs/nfs/Makefile
+++ b/fs/nfs/Makefile
@@ -6,7 +6,8 @@
nfs-y := client.o dir.o file.o getroot.o inode.o super.o nfs2xdr.o \
direct.o pagelist.o proc.o read.o symlink.o unlink.o \
- write.o namespace.o mount_clnt.o
+ write.o namespace.o mount_clnt.o \
+ dns_resolve.o cache_lib.o
nfs-$(CONFIG_ROOT_NFS) += nfsroot.o
nfs-$(CONFIG_NFS_V3) += nfs3proc.o nfs3xdr.o
nfs-$(CONFIG_NFS_V3_ACL) += nfs3acl.o
diff --git a/fs/nfs/cache_lib.c b/fs/nfs/cache_lib.c
new file mode 100644
index 0000000..b4ffd01
--- /dev/null
+++ b/fs/nfs/cache_lib.c
@@ -0,0 +1,140 @@
+/*
+ * linux/fs/nfs/cache_lib.c
+ *
+ * Helper routines for the NFS client caches
+ *
+ * Copyright (c) 2009 Trond Myklebust <Trond.Myklebust@netapp.com>
+ */
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/sunrpc/cache.h>
+#include <linux/sunrpc/rpc_pipe_fs.h>
+
+#include "cache_lib.h"
+
+#define NFS_CACHE_UPCALL_PATHLEN 256
+#define NFS_CACHE_UPCALL_TIMEOUT 15
+
+static char nfs_cache_getent_prog[NFS_CACHE_UPCALL_PATHLEN] =
+ "/sbin/nfs_cache_getent";
+static unsigned long nfs_cache_getent_timeout = NFS_CACHE_UPCALL_TIMEOUT;
+
+module_param_string(cache_getent, nfs_cache_getent_prog,
+ sizeof(nfs_cache_getent_prog), 0600);
+MODULE_PARM_DESC(cache_getent, "Path to the client cache upcall program");
+module_param_named(cache_getent_timeout, nfs_cache_getent_timeout, ulong, 0600);
+MODULE_PARM_DESC(cache_getent_timeout, "Timeout (in seconds) after which "
+ "the cache upcall is assumed to have failed");
+
+int nfs_cache_upcall(struct cache_detail *cd, char *entry_name)
+{
+ static char *envp[] = { "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL
+ };
+ char *argv[] = {
+ nfs_cache_getent_prog,
+ cd->name,
+ entry_name,
+ NULL
+ };
+ int ret = -EACCES;
+
+ if (nfs_cache_getent_prog[0] == '\0')
+ goto out;
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
+ /*
+ * Disable the upcall mechanism if we're getting an ENOENT or
+ * EACCES error. The admin can re-enable it on the fly by using
+ * sysfs to set the 'cache_getent' parameter once the problem
+ * has been fixed.
+ */
+ if (ret == -ENOENT || ret == -EACCES)
+ nfs_cache_getent_prog[0] = '\0';
+out:
+ return ret > 0 ? 0 : ret;
+}
+
+/*
+ * Deferred request handling
+ */
+void nfs_cache_defer_req_put(struct nfs_cache_defer_req *dreq)
+{
+ if (atomic_dec_and_test(&dreq->count))
+ kfree(dreq);
+}
+
+static void nfs_dns_cache_revisit(struct cache_deferred_req *d, int toomany)
+{
+ struct nfs_cache_defer_req *dreq;
+
+ dreq = container_of(d, struct nfs_cache_defer_req, deferred_req);
+
+ complete_all(&dreq->completion);
+ nfs_cache_defer_req_put(dreq);
+}
+
+static struct cache_deferred_req *nfs_dns_cache_defer(struct cache_req *req)
+{
+ struct nfs_cache_defer_req *dreq;
+
+ dreq = container_of(req, struct nfs_cache_defer_req, req);
+ dreq->deferred_req.revisit = nfs_dns_cache_revisit;
+ atomic_inc(&dreq->count);
+
+ return &dreq->deferred_req;
+}
+
+struct nfs_cache_defer_req *nfs_cache_defer_req_alloc(void)
+{
+ struct nfs_cache_defer_req *dreq;
+
+ dreq = kzalloc(sizeof(*dreq), GFP_KERNEL);
+ if (dreq) {
+ init_completion(&dreq->completion);
+ atomic_set(&dreq->count, 1);
+ dreq->req.defer = nfs_dns_cache_defer;
+ }
+ return dreq;
+}
+
+int nfs_cache_wait_for_upcall(struct nfs_cache_defer_req *dreq)
+{
+ if (wait_for_completion_timeout(&dreq->completion,
+ nfs_cache_getent_timeout * HZ) == 0)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+int nfs_cache_register(struct cache_detail *cd)
+{
+ struct nameidata nd;
+ struct vfsmount *mnt;
+ int ret;
+
+ mnt = rpc_get_mount();
+ if (IS_ERR(mnt))
+ return PTR_ERR(mnt);
+ ret = vfs_path_lookup(mnt->mnt_root, mnt, "/cache", 0, &nd);
+ if (ret)
+ goto err;
+ ret = sunrpc_cache_register_pipefs(nd.path.dentry,
+ cd->name, 0600, cd);
+ path_put(&nd.path);
+ if (!ret)
+ return ret;
+err:
+ rpc_put_mount();
+ return ret;
+}
+
+void nfs_cache_unregister(struct cache_detail *cd)
+{
+ sunrpc_cache_unregister_pipefs(cd);
+ rpc_put_mount();
+}
+
diff --git a/fs/nfs/cache_lib.h b/fs/nfs/cache_lib.h
new file mode 100644
index 0000000..76f856e
--- /dev/null
+++ b/fs/nfs/cache_lib.h
@@ -0,0 +1,27 @@
+/*
+ * Helper routines for the NFS client caches
+ *
+ * Copyright (c) 2009 Trond Myklebust <Trond.Myklebust@netapp.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/sunrpc/cache.h>
+#include <asm/atomic.h>
+
+/*
+ * Deferred request handling
+ */
+struct nfs_cache_defer_req {
+ struct cache_req req;
+ struct cache_deferred_req deferred_req;
+ struct completion completion;
+ atomic_t count;
+};
+
+extern int nfs_cache_upcall(struct cache_detail *cd, char *entry_name);
+extern struct nfs_cache_defer_req *nfs_cache_defer_req_alloc(void);
+extern void nfs_cache_defer_req_put(struct nfs_cache_defer_req *dreq);
+extern int nfs_cache_wait_for_upcall(struct nfs_cache_defer_req *dreq);
+
+extern int nfs_cache_register(struct cache_detail *cd);
+extern void nfs_cache_unregister(struct cache_detail *cd);
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 7f604c7..293fa05 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -43,21 +43,29 @@
unsigned int nfs_callback_set_tcpport;
unsigned short nfs_callback_tcpport;
unsigned short nfs_callback_tcpport6;
-static const int nfs_set_port_min = 0;
-static const int nfs_set_port_max = 65535;
+#define NFS_CALLBACK_MAXPORTNR (65535U)
-static int param_set_port(const char *val, struct kernel_param *kp)
+static int param_set_portnr(const char *val, struct kernel_param *kp)
{
- char *endp;
- int num = simple_strtol(val, &endp, 0);
- if (endp == val || *endp || num < nfs_set_port_min || num > nfs_set_port_max)
+ unsigned long num;
+ int ret;
+
+ if (!val)
return -EINVAL;
- *((int *)kp->arg) = num;
+ ret = strict_strtoul(val, 0, &num);
+ if (ret == -EINVAL || num > NFS_CALLBACK_MAXPORTNR)
+ return -EINVAL;
+ *((unsigned int *)kp->arg) = num;
return 0;
}
-module_param_call(callback_tcpport, param_set_port, param_get_int,
- &nfs_callback_set_tcpport, 0644);
+static int param_get_portnr(char *buffer, struct kernel_param *kp)
+{
+ return param_get_uint(buffer, kp);
+}
+#define param_check_portnr(name, p) __param_check(name, p, unsigned int);
+
+module_param_named(callback_tcpport, nfs_callback_set_tcpport, portnr, 0644);
/*
* This is the NFSv4 callback kernel thread.
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 8d25ccb..e350bd6 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -809,6 +809,9 @@
/* Initialise the client representation from the mount data */
server->flags = data->flags;
server->options = data->options;
+ server->caps |= NFS_CAP_HARDLINKS|NFS_CAP_SYMLINKS|NFS_CAP_FILEID|
+ NFS_CAP_MODE|NFS_CAP_NLINK|NFS_CAP_OWNER|NFS_CAP_OWNER_GROUP|
+ NFS_CAP_ATIME|NFS_CAP_CTIME|NFS_CAP_MTIME;
if (data->rsize)
server->rsize = nfs_block_size(data->rsize, NULL);
@@ -879,6 +882,7 @@
server->rsize = NFS_MAX_FILE_IO_SIZE;
server->rpages = (server->rsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+ server->backing_dev_info.name = "nfs";
server->backing_dev_info.ra_pages = server->rpages * NFS_MAX_READAHEAD;
if (server->wsize > max_rpc_payload)
@@ -1074,10 +1078,6 @@
(unsigned long long) server->fsid.major,
(unsigned long long) server->fsid.minor);
- BUG_ON(!server->nfs_client);
- BUG_ON(!server->nfs_client->rpc_ops);
- BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
spin_lock(&nfs_client_lock);
list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
list_add_tail(&server->master_link, &nfs_volume_list);
@@ -1274,7 +1274,7 @@
/* Initialise the client representation from the mount data */
server->flags = data->flags;
- server->caps |= NFS_CAP_ATOMIC_OPEN;
+ server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR;
server->options = data->options;
/* Get a client record */
@@ -1359,10 +1359,6 @@
if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
server->namelen = NFS4_MAXNAMLEN;
- BUG_ON(!server->nfs_client);
- BUG_ON(!server->nfs_client->rpc_ops);
- BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
spin_lock(&nfs_client_lock);
list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
list_add_tail(&server->master_link, &nfs_volume_list);
@@ -1400,7 +1396,7 @@
/* Initialise the client representation from the parent server */
nfs_server_copy_userdata(server, parent_server);
- server->caps |= NFS_CAP_ATOMIC_OPEN;
+ server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR;
/* Get a client representation.
* Note: NFSv4 always uses TCP, */
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index e4e089a..6c32100 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -934,9 +934,6 @@
* back into its cache. We let the server do generic write
* parameter checking and report problems.
*
- * We also avoid an unnecessary invocation of generic_osync_inode(),
- * as it is fairly meaningless to sync the metadata of an NFS file.
- *
* We eliminate local atime updates, see direct read above.
*
* We avoid unnecessary page cache invalidations for normal cached
diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c
new file mode 100644
index 0000000..f4d54ba
--- /dev/null
+++ b/fs/nfs/dns_resolve.c
@@ -0,0 +1,335 @@
+/*
+ * linux/fs/nfs/dns_resolve.c
+ *
+ * Copyright (c) 2009 Trond Myklebust <Trond.Myklebust@netapp.com>
+ *
+ * Resolves DNS hostnames into valid ip addresses
+ */
+
+#include <linux/hash.h>
+#include <linux/string.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/socket.h>
+#include <linux/seq_file.h>
+#include <linux/inet.h>
+#include <linux/sunrpc/clnt.h>
+#include <linux/sunrpc/cache.h>
+#include <linux/sunrpc/svcauth.h>
+
+#include "dns_resolve.h"
+#include "cache_lib.h"
+
+#define NFS_DNS_HASHBITS 4
+#define NFS_DNS_HASHTBL_SIZE (1 << NFS_DNS_HASHBITS)
+
+static struct cache_head *nfs_dns_table[NFS_DNS_HASHTBL_SIZE];
+
+struct nfs_dns_ent {
+ struct cache_head h;
+
+ char *hostname;
+ size_t namelen;
+
+ struct sockaddr_storage addr;
+ size_t addrlen;
+};
+
+
+static void nfs_dns_ent_init(struct cache_head *cnew,
+ struct cache_head *ckey)
+{
+ struct nfs_dns_ent *new;
+ struct nfs_dns_ent *key;
+
+ new = container_of(cnew, struct nfs_dns_ent, h);
+ key = container_of(ckey, struct nfs_dns_ent, h);
+
+ kfree(new->hostname);
+ new->hostname = kstrndup(key->hostname, key->namelen, GFP_KERNEL);
+ if (new->hostname) {
+ new->namelen = key->namelen;
+ memcpy(&new->addr, &key->addr, key->addrlen);
+ new->addrlen = key->addrlen;
+ } else {
+ new->namelen = 0;
+ new->addrlen = 0;
+ }
+}
+
+static void nfs_dns_ent_put(struct kref *ref)
+{
+ struct nfs_dns_ent *item;
+
+ item = container_of(ref, struct nfs_dns_ent, h.ref);
+ kfree(item->hostname);
+ kfree(item);
+}
+
+static struct cache_head *nfs_dns_ent_alloc(void)
+{
+ struct nfs_dns_ent *item = kmalloc(sizeof(*item), GFP_KERNEL);
+
+ if (item != NULL) {
+ item->hostname = NULL;
+ item->namelen = 0;
+ item->addrlen = 0;
+ return &item->h;
+ }
+ return NULL;
+};
+
+static unsigned int nfs_dns_hash(const struct nfs_dns_ent *key)
+{
+ return hash_str(key->hostname, NFS_DNS_HASHBITS);
+}
+
+static void nfs_dns_request(struct cache_detail *cd,
+ struct cache_head *ch,
+ char **bpp, int *blen)
+{
+ struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h);
+
+ qword_add(bpp, blen, key->hostname);
+ (*bpp)[-1] = '\n';
+}
+
+static int nfs_dns_upcall(struct cache_detail *cd,
+ struct cache_head *ch)
+{
+ struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h);
+ int ret;
+
+ ret = nfs_cache_upcall(cd, key->hostname);
+ if (ret)
+ ret = sunrpc_cache_pipe_upcall(cd, ch, nfs_dns_request);
+ return ret;
+}
+
+static int nfs_dns_match(struct cache_head *ca,
+ struct cache_head *cb)
+{
+ struct nfs_dns_ent *a;
+ struct nfs_dns_ent *b;
+
+ a = container_of(ca, struct nfs_dns_ent, h);
+ b = container_of(cb, struct nfs_dns_ent, h);
+
+ if (a->namelen == 0 || a->namelen != b->namelen)
+ return 0;
+ return memcmp(a->hostname, b->hostname, a->namelen) == 0;
+}
+
+static int nfs_dns_show(struct seq_file *m, struct cache_detail *cd,
+ struct cache_head *h)
+{
+ struct nfs_dns_ent *item;
+ long ttl;
+
+ if (h == NULL) {
+ seq_puts(m, "# ip address hostname ttl\n");
+ return 0;
+ }
+ item = container_of(h, struct nfs_dns_ent, h);
+ ttl = (long)item->h.expiry_time - (long)get_seconds();
+ if (ttl < 0)
+ ttl = 0;
+
+ if (!test_bit(CACHE_NEGATIVE, &h->flags)) {
+ char buf[INET6_ADDRSTRLEN+IPV6_SCOPE_ID_LEN+1];
+
+ rpc_ntop((struct sockaddr *)&item->addr, buf, sizeof(buf));
+ seq_printf(m, "%15s ", buf);
+ } else
+ seq_puts(m, "<none> ");
+ seq_printf(m, "%15s %ld\n", item->hostname, ttl);
+ return 0;
+}
+
+struct nfs_dns_ent *nfs_dns_lookup(struct cache_detail *cd,
+ struct nfs_dns_ent *key)
+{
+ struct cache_head *ch;
+
+ ch = sunrpc_cache_lookup(cd,
+ &key->h,
+ nfs_dns_hash(key));
+ if (!ch)
+ return NULL;
+ return container_of(ch, struct nfs_dns_ent, h);
+}
+
+struct nfs_dns_ent *nfs_dns_update(struct cache_detail *cd,
+ struct nfs_dns_ent *new,
+ struct nfs_dns_ent *key)
+{
+ struct cache_head *ch;
+
+ ch = sunrpc_cache_update(cd,
+ &new->h, &key->h,
+ nfs_dns_hash(key));
+ if (!ch)
+ return NULL;
+ return container_of(ch, struct nfs_dns_ent, h);
+}
+
+static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen)
+{
+ char buf1[NFS_DNS_HOSTNAME_MAXLEN+1];
+ struct nfs_dns_ent key, *item;
+ unsigned long ttl;
+ ssize_t len;
+ int ret = -EINVAL;
+
+ if (buf[buflen-1] != '\n')
+ goto out;
+ buf[buflen-1] = '\0';
+
+ len = qword_get(&buf, buf1, sizeof(buf1));
+ if (len <= 0)
+ goto out;
+ key.addrlen = rpc_pton(buf1, len,
+ (struct sockaddr *)&key.addr,
+ sizeof(key.addr));
+
+ len = qword_get(&buf, buf1, sizeof(buf1));
+ if (len <= 0)
+ goto out;
+
+ key.hostname = buf1;
+ key.namelen = len;
+ memset(&key.h, 0, sizeof(key.h));
+
+ ttl = get_expiry(&buf);
+ if (ttl == 0)
+ goto out;
+ key.h.expiry_time = ttl + get_seconds();
+
+ ret = -ENOMEM;
+ item = nfs_dns_lookup(cd, &key);
+ if (item == NULL)
+ goto out;
+
+ if (key.addrlen == 0)
+ set_bit(CACHE_NEGATIVE, &key.h.flags);
+
+ item = nfs_dns_update(cd, &key, item);
+ if (item == NULL)
+ goto out;
+
+ ret = 0;
+ cache_put(&item->h, cd);
+out:
+ return ret;
+}
+
+static struct cache_detail nfs_dns_resolve = {
+ .owner = THIS_MODULE,
+ .hash_size = NFS_DNS_HASHTBL_SIZE,
+ .hash_table = nfs_dns_table,
+ .name = "dns_resolve",
+ .cache_put = nfs_dns_ent_put,
+ .cache_upcall = nfs_dns_upcall,
+ .cache_parse = nfs_dns_parse,
+ .cache_show = nfs_dns_show,
+ .match = nfs_dns_match,
+ .init = nfs_dns_ent_init,
+ .update = nfs_dns_ent_init,
+ .alloc = nfs_dns_ent_alloc,
+};
+
+static int do_cache_lookup(struct cache_detail *cd,
+ struct nfs_dns_ent *key,
+ struct nfs_dns_ent **item,
+ struct nfs_cache_defer_req *dreq)
+{
+ int ret = -ENOMEM;
+
+ *item = nfs_dns_lookup(cd, key);
+ if (*item) {
+ ret = cache_check(cd, &(*item)->h, &dreq->req);
+ if (ret)
+ *item = NULL;
+ }
+ return ret;
+}
+
+static int do_cache_lookup_nowait(struct cache_detail *cd,
+ struct nfs_dns_ent *key,
+ struct nfs_dns_ent **item)
+{
+ int ret = -ENOMEM;
+
+ *item = nfs_dns_lookup(cd, key);
+ if (!*item)
+ goto out_err;
+ ret = -ETIMEDOUT;
+ if (!test_bit(CACHE_VALID, &(*item)->h.flags)
+ || (*item)->h.expiry_time < get_seconds()
+ || cd->flush_time > (*item)->h.last_refresh)
+ goto out_put;
+ ret = -ENOENT;
+ if (test_bit(CACHE_NEGATIVE, &(*item)->h.flags))
+ goto out_put;
+ return 0;
+out_put:
+ cache_put(&(*item)->h, cd);
+out_err:
+ *item = NULL;
+ return ret;
+}
+
+static int do_cache_lookup_wait(struct cache_detail *cd,
+ struct nfs_dns_ent *key,
+ struct nfs_dns_ent **item)
+{
+ struct nfs_cache_defer_req *dreq;
+ int ret = -ENOMEM;
+
+ dreq = nfs_cache_defer_req_alloc();
+ if (!dreq)
+ goto out;
+ ret = do_cache_lookup(cd, key, item, dreq);
+ if (ret == -EAGAIN) {
+ ret = nfs_cache_wait_for_upcall(dreq);
+ if (!ret)
+ ret = do_cache_lookup_nowait(cd, key, item);
+ }
+ nfs_cache_defer_req_put(dreq);
+out:
+ return ret;
+}
+
+ssize_t nfs_dns_resolve_name(char *name, size_t namelen,
+ struct sockaddr *sa, size_t salen)
+{
+ struct nfs_dns_ent key = {
+ .hostname = name,
+ .namelen = namelen,
+ };
+ struct nfs_dns_ent *item = NULL;
+ ssize_t ret;
+
+ ret = do_cache_lookup_wait(&nfs_dns_resolve, &key, &item);
+ if (ret == 0) {
+ if (salen >= item->addrlen) {
+ memcpy(sa, &item->addr, item->addrlen);
+ ret = item->addrlen;
+ } else
+ ret = -EOVERFLOW;
+ cache_put(&item->h, &nfs_dns_resolve);
+ } else if (ret == -ENOENT)
+ ret = -ESRCH;
+ return ret;
+}
+
+int nfs_dns_resolver_init(void)
+{
+ return nfs_cache_register(&nfs_dns_resolve);
+}
+
+void nfs_dns_resolver_destroy(void)
+{
+ nfs_cache_unregister(&nfs_dns_resolve);
+}
+
diff --git a/fs/nfs/dns_resolve.h b/fs/nfs/dns_resolve.h
new file mode 100644
index 0000000..a3f0938
--- /dev/null
+++ b/fs/nfs/dns_resolve.h
@@ -0,0 +1,14 @@
+/*
+ * Resolve DNS hostnames into valid ip addresses
+ */
+#ifndef __LINUX_FS_NFS_DNS_RESOLVE_H
+#define __LINUX_FS_NFS_DNS_RESOLVE_H
+
+#define NFS_DNS_HOSTNAME_MAXLEN (128)
+
+extern int nfs_dns_resolver_init(void);
+extern void nfs_dns_resolver_destroy(void);
+extern ssize_t nfs_dns_resolve_name(char *name, size_t namelen,
+ struct sockaddr *sa, size_t salen);
+
+#endif
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0506232..5021b75 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -328,6 +328,42 @@
}
/*
+ * Decide whether a read/modify/write cycle may be more efficient
+ * then a modify/write/read cycle when writing to a page in the
+ * page cache.
+ *
+ * The modify/write/read cycle may occur if a page is read before
+ * being completely filled by the writer. In this situation, the
+ * page must be completely written to stable storage on the server
+ * before it can be refilled by reading in the page from the server.
+ * This can lead to expensive, small, FILE_SYNC mode writes being
+ * done.
+ *
+ * It may be more efficient to read the page first if the file is
+ * open for reading in addition to writing, the page is not marked
+ * as Uptodate, it is not dirty or waiting to be committed,
+ * indicating that it was previously allocated and then modified,
+ * that there were valid bytes of data in that range of the file,
+ * and that the new data won't completely replace the old data in
+ * that range of the file.
+ */
+static int nfs_want_read_modify_write(struct file *file, struct page *page,
+ loff_t pos, unsigned len)
+{
+ unsigned int pglen = nfs_page_length(page);
+ unsigned int offset = pos & (PAGE_CACHE_SIZE - 1);
+ unsigned int end = offset + len;
+
+ if ((file->f_mode & FMODE_READ) && /* open for read? */
+ !PageUptodate(page) && /* Uptodate? */
+ !PagePrivate(page) && /* i/o request already? */
+ pglen && /* valid bytes of file? */
+ (end < pglen || offset)) /* replace all valid bytes? */
+ return 1;
+ return 0;
+}
+
+/*
* This does the "real" work of the write. We must allocate and lock the
* page to be sent back to the generic routine, which then copies the
* data from user space.
@@ -340,15 +376,16 @@
struct page **pagep, void **fsdata)
{
int ret;
- pgoff_t index;
+ pgoff_t index = pos >> PAGE_CACHE_SHIFT;
struct page *page;
- index = pos >> PAGE_CACHE_SHIFT;
+ int once_thru = 0;
dfprintk(PAGECACHE, "NFS: write_begin(%s/%s(%ld), %u@%lld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name,
mapping->host->i_ino, len, (long long) pos);
+start:
/*
* Prevent starvation issues if someone is doing a consistency
* sync-to-disk
@@ -367,6 +404,13 @@
if (ret) {
unlock_page(page);
page_cache_release(page);
+ } else if (!once_thru &&
+ nfs_want_read_modify_write(file, page, pos, len)) {
+ once_thru = 1;
+ ret = nfs_readpage(file, page);
+ page_cache_release(page);
+ if (!ret)
+ goto start;
}
return ret;
}
@@ -479,6 +523,7 @@
.invalidatepage = nfs_invalidate_page,
.releasepage = nfs_release_page,
.direct_IO = nfs_direct_IO,
+ .migratepage = nfs_migrate_page,
.launder_page = nfs_launder_page,
};
diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c
index 86147b0..21a84d45 100644
--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -101,7 +101,7 @@
static unsigned int fnvhash32(const void *, size_t);
-static struct rpc_pipe_ops idmap_upcall_ops = {
+static const struct rpc_pipe_ops idmap_upcall_ops = {
.upcall = idmap_pipe_upcall,
.downcall = idmap_pipe_downcall,
.destroy_msg = idmap_pipe_destroy_msg,
@@ -119,8 +119,8 @@
if (idmap == NULL)
return -ENOMEM;
- idmap->idmap_dentry = rpc_mkpipe(clp->cl_rpcclient->cl_dentry, "idmap",
- idmap, &idmap_upcall_ops, 0);
+ idmap->idmap_dentry = rpc_mkpipe(clp->cl_rpcclient->cl_path.dentry,
+ "idmap", idmap, &idmap_upcall_ops, 0);
if (IS_ERR(idmap->idmap_dentry)) {
error = PTR_ERR(idmap->idmap_dentry);
kfree(idmap);
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index bd7938e..060022b 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -46,6 +46,7 @@
#include "iostat.h"
#include "internal.h"
#include "fscache.h"
+#include "dns_resolve.h"
#define NFSDBG_FACILITY NFSDBG_VFS
@@ -286,6 +287,11 @@
/* We can't support update_atime(), since the server will reset it */
inode->i_flags |= S_NOATIME|S_NOCMTIME;
inode->i_mode = fattr->mode;
+ if ((fattr->valid & NFS_ATTR_FATTR_MODE) == 0
+ && nfs_server_capable(inode, NFS_CAP_MODE))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
/* Why so? Because we want revalidate for devices/FIFOs, and
* that's precisely what we have in nfs_file_inode_operations.
*/
@@ -330,20 +336,46 @@
nfsi->attr_gencount = fattr->gencount;
if (fattr->valid & NFS_ATTR_FATTR_ATIME)
inode->i_atime = fattr->atime;
+ else if (nfs_server_capable(inode, NFS_CAP_ATIME))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (fattr->valid & NFS_ATTR_FATTR_MTIME)
inode->i_mtime = fattr->mtime;
+ else if (nfs_server_capable(inode, NFS_CAP_MTIME))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA;
if (fattr->valid & NFS_ATTR_FATTR_CTIME)
inode->i_ctime = fattr->ctime;
+ else if (nfs_server_capable(inode, NFS_CAP_CTIME))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
if (fattr->valid & NFS_ATTR_FATTR_CHANGE)
nfsi->change_attr = fattr->change_attr;
+ else if (nfs_server_capable(inode, NFS_CAP_CHANGE_ATTR))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA;
if (fattr->valid & NFS_ATTR_FATTR_SIZE)
inode->i_size = nfs_size_to_loff_t(fattr->size);
+ else
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA
+ | NFS_INO_REVAL_PAGECACHE;
if (fattr->valid & NFS_ATTR_FATTR_NLINK)
inode->i_nlink = fattr->nlink;
+ else if (nfs_server_capable(inode, NFS_CAP_NLINK))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (fattr->valid & NFS_ATTR_FATTR_OWNER)
inode->i_uid = fattr->uid;
+ else if (nfs_server_capable(inode, NFS_CAP_OWNER))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
if (fattr->valid & NFS_ATTR_FATTR_GROUP)
inode->i_gid = fattr->gid;
+ else if (nfs_server_capable(inode, NFS_CAP_OWNER_GROUP))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED)
inode->i_blocks = fattr->du.nfs2.blocks;
if (fattr->valid & NFS_ATTR_FATTR_SPACE_USED) {
@@ -1145,6 +1177,7 @@
loff_t cur_isize, new_isize;
unsigned long invalid = 0;
unsigned long now = jiffies;
+ unsigned long save_cache_validity;
dfprintk(VFS, "NFS: %s(%s/%ld ct=%d info=0x%x)\n",
__func__, inode->i_sb->s_id, inode->i_ino,
@@ -1171,10 +1204,11 @@
*/
nfsi->read_cache_jiffies = fattr->time_start;
- if ((fattr->valid & NFS_ATTR_FATTR_CHANGE) || (fattr->valid & (NFS_ATTR_FATTR_MTIME|NFS_ATTR_FATTR_CTIME)))
- nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR
- | NFS_INO_INVALID_ATIME
- | NFS_INO_REVAL_PAGECACHE);
+ save_cache_validity = nfsi->cache_validity;
+ nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ATIME
+ | NFS_INO_REVAL_FORCED
+ | NFS_INO_REVAL_PAGECACHE);
/* Do atomic weak cache consistency updates */
nfs_wcc_update_inode(inode, fattr);
@@ -1189,7 +1223,8 @@
nfs_force_lookup_revalidate(inode);
nfsi->change_attr = fattr->change_attr;
}
- }
+ } else if (server->caps & NFS_CAP_CHANGE_ATTR)
+ invalid |= save_cache_validity;
if (fattr->valid & NFS_ATTR_FATTR_MTIME) {
/* NFSv2/v3: Check if the mtime agrees */
@@ -1201,7 +1236,12 @@
nfs_force_lookup_revalidate(inode);
memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime));
}
- }
+ } else if (server->caps & NFS_CAP_MTIME)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA
+ | NFS_INO_REVAL_PAGECACHE
+ | NFS_INO_REVAL_FORCED);
+
if (fattr->valid & NFS_ATTR_FATTR_CTIME) {
/* If ctime has changed we should definitely clear access+acl caches */
if (!timespec_equal(&inode->i_ctime, &fattr->ctime)) {
@@ -1215,7 +1255,11 @@
}
memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime));
}
- }
+ } else if (server->caps & NFS_CAP_CTIME)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
/* Check if our cached file size is stale */
if (fattr->valid & NFS_ATTR_FATTR_SIZE) {
@@ -1231,30 +1275,50 @@
dprintk("NFS: isize change on server for file %s/%ld\n",
inode->i_sb->s_id, inode->i_ino);
}
- }
+ } else
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_REVAL_PAGECACHE
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_ATIME)
memcpy(&inode->i_atime, &fattr->atime, sizeof(inode->i_atime));
+ else if (server->caps & NFS_CAP_ATIME)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATIME
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_MODE) {
if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) {
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
inode->i_mode = fattr->mode;
}
- }
+ } else if (server->caps & NFS_CAP_MODE)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
+
if (fattr->valid & NFS_ATTR_FATTR_OWNER) {
if (inode->i_uid != fattr->uid) {
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
inode->i_uid = fattr->uid;
}
- }
+ } else if (server->caps & NFS_CAP_OWNER)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
+
if (fattr->valid & NFS_ATTR_FATTR_GROUP) {
if (inode->i_gid != fattr->gid) {
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
inode->i_gid = fattr->gid;
}
- }
+ } else if (server->caps & NFS_CAP_OWNER_GROUP)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_NLINK) {
if (inode->i_nlink != fattr->nlink) {
@@ -1263,7 +1327,9 @@
invalid |= NFS_INO_INVALID_DATA;
inode->i_nlink = fattr->nlink;
}
- }
+ } else if (server->caps & NFS_CAP_NLINK)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_SPACE_USED) {
/*
@@ -1293,9 +1359,8 @@
|| S_ISLNK(inode->i_mode)))
invalid &= ~NFS_INO_INVALID_DATA;
if (!nfs_have_delegation(inode, FMODE_READ) ||
- (nfsi->cache_validity & NFS_INO_REVAL_FORCED))
+ (save_cache_validity & NFS_INO_REVAL_FORCED))
nfsi->cache_validity |= invalid;
- nfsi->cache_validity &= ~NFS_INO_REVAL_FORCED;
return 0;
out_changed:
@@ -1442,6 +1507,10 @@
{
int err;
+ err = nfs_dns_resolver_init();
+ if (err < 0)
+ goto out8;
+
err = nfs_fscache_register();
if (err < 0)
goto out7;
@@ -1500,6 +1569,8 @@
out6:
nfs_fscache_unregister();
out7:
+ nfs_dns_resolver_destroy();
+out8:
return err;
}
@@ -1511,6 +1582,7 @@
nfs_destroy_inodecache();
nfs_destroy_nfspagecache();
nfs_fscache_unregister();
+ nfs_dns_resolver_destroy();
#ifdef CONFIG_PROC_FS
rpc_proc_unregister("nfs");
#endif
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 7dd90a6..e21b1bb 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -49,6 +49,11 @@
#define NFS_MAX_SECFLAVORS (12)
/*
+ * Value used if the user did not specify a port value.
+ */
+#define NFS_UNSPEC_PORT (-1)
+
+/*
* In-kernel mount arguments
*/
struct nfs_parsed_mount_data {
@@ -63,6 +68,7 @@
unsigned int auth_flavor_len;
rpc_authflavor_t auth_flavors[1];
char *client_address;
+ unsigned int version;
unsigned int minorversion;
char *fscache_uniq;
@@ -71,7 +77,7 @@
size_t addrlen;
char *hostname;
u32 version;
- unsigned short port;
+ int port;
unsigned short protocol;
} mount_server;
@@ -80,7 +86,7 @@
size_t addrlen;
char *hostname;
char *export_path;
- unsigned short port;
+ int port;
unsigned short protocol;
} nfs_server;
@@ -102,6 +108,7 @@
};
extern int nfs_mount(struct nfs_mount_request *info);
+extern void nfs_umount(const struct nfs_mount_request *info);
/* client.c */
extern struct rpc_program nfs_program;
@@ -213,7 +220,6 @@
extern int nfs_wait_bit_killable(void *word);
/* super.c */
-void nfs_parse_ip_address(char *, size_t, struct sockaddr *, size_t *);
extern struct file_system_type nfs_xdev_fs_type;
#ifdef CONFIG_NFS_V4
extern struct file_system_type nfs4_xdev_fs_type;
@@ -248,6 +254,12 @@
/* write.c */
extern void nfs_write_prepare(struct rpc_task *task, void *calldata);
+#ifdef CONFIG_MIGRATION
+extern int nfs_migrate_page(struct address_space *,
+ struct page *, struct page *);
+#else
+#define nfs_migrate_page NULL
+#endif
/* nfs4proc.c */
extern int _nfs4_call_sync(struct nfs_server *server,
@@ -368,24 +380,3 @@
return ((unsigned long)len + (unsigned long)base +
PAGE_SIZE - 1) >> PAGE_SHIFT;
}
-
-#define IPV6_SCOPE_DELIMITER '%'
-
-/*
- * Set the port number in an address. Be agnostic about the address
- * family.
- */
-static inline void nfs_set_port(struct sockaddr *sap, unsigned short port)
-{
- struct sockaddr_in *ap = (struct sockaddr_in *)sap;
- struct sockaddr_in6 *ap6 = (struct sockaddr_in6 *)sap;
-
- switch (sap->sa_family) {
- case AF_INET:
- ap->sin_port = htons(port);
- break;
- case AF_INET6:
- ap6->sin6_port = htons(port);
- break;
- }
-}
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 38ef9ea..0adefc4 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -209,6 +209,71 @@
goto out;
}
+/**
+ * nfs_umount - Notify a server that we have unmounted this export
+ * @info: pointer to umount request arguments
+ *
+ * MOUNTPROC_UMNT is advisory, so we set a short timeout, and always
+ * use UDP.
+ */
+void nfs_umount(const struct nfs_mount_request *info)
+{
+ static const struct rpc_timeout nfs_umnt_timeout = {
+ .to_initval = 1 * HZ,
+ .to_maxval = 3 * HZ,
+ .to_retries = 2,
+ };
+ struct rpc_create_args args = {
+ .protocol = IPPROTO_UDP,
+ .address = info->sap,
+ .addrsize = info->salen,
+ .timeout = &nfs_umnt_timeout,
+ .servername = info->hostname,
+ .program = &mnt_program,
+ .version = info->version,
+ .authflavor = RPC_AUTH_UNIX,
+ .flags = RPC_CLNT_CREATE_NOPING,
+ };
+ struct mountres result;
+ struct rpc_message msg = {
+ .rpc_argp = info->dirpath,
+ .rpc_resp = &result,
+ };
+ struct rpc_clnt *clnt;
+ int status;
+
+ if (info->noresvport)
+ args.flags |= RPC_CLNT_CREATE_NONPRIVPORT;
+
+ clnt = rpc_create(&args);
+ if (unlikely(IS_ERR(clnt)))
+ goto out_clnt_err;
+
+ dprintk("NFS: sending UMNT request for %s:%s\n",
+ (info->hostname ? info->hostname : "server"), info->dirpath);
+
+ if (info->version == NFS_MNT3_VERSION)
+ msg.rpc_proc = &clnt->cl_procinfo[MOUNTPROC3_UMNT];
+ else
+ msg.rpc_proc = &clnt->cl_procinfo[MOUNTPROC_UMNT];
+
+ status = rpc_call_sync(clnt, &msg, 0);
+ rpc_shutdown_client(clnt);
+
+ if (unlikely(status < 0))
+ goto out_call_err;
+
+ return;
+
+out_clnt_err:
+ dprintk("NFS: failed to create UMNT RPC client, status=%ld\n",
+ PTR_ERR(clnt));
+ return;
+
+out_call_err:
+ dprintk("NFS: UMNT request failed, status=%d\n", status);
+}
+
/*
* XDR encode/decode functions for MOUNT
*/
@@ -258,7 +323,7 @@
return -EIO;
status = ntohl(*p);
- for (i = 0; i <= ARRAY_SIZE(mnt_errtbl); i++) {
+ for (i = 0; i < ARRAY_SIZE(mnt_errtbl); i++) {
if (mnt_errtbl[i].status == status) {
res->errno = mnt_errtbl[i].errno;
return 0;
@@ -309,7 +374,7 @@
return -EIO;
status = ntohl(*p);
- for (i = 0; i <= ARRAY_SIZE(mnt3_errtbl); i++) {
+ for (i = 0; i < ARRAY_SIZE(mnt3_errtbl); i++) {
if (mnt3_errtbl[i].status == status) {
res->errno = mnt3_errtbl[i].errno;
return 0;
@@ -407,6 +472,13 @@
.p_statidx = MOUNTPROC_MNT,
.p_name = "MOUNT",
},
+ [MOUNTPROC_UMNT] = {
+ .p_proc = MOUNTPROC_UMNT,
+ .p_encode = (kxdrproc_t)mnt_enc_dirpath,
+ .p_arglen = MNT_enc_dirpath_sz,
+ .p_statidx = MOUNTPROC_UMNT,
+ .p_name = "UMOUNT",
+ },
};
static struct rpc_procinfo mnt3_procedures[] = {
@@ -419,6 +491,13 @@
.p_statidx = MOUNTPROC3_MNT,
.p_name = "MOUNT",
},
+ [MOUNTPROC3_UMNT] = {
+ .p_proc = MOUNTPROC3_UMNT,
+ .p_encode = (kxdrproc_t)mnt_enc_dirpath,
+ .p_arglen = MNT_enc_dirpath_sz,
+ .p_statidx = MOUNTPROC3_UMNT,
+ .p_name = "UMOUNT",
+ },
};
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index d0cc5ce..ee6a13f 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -299,7 +299,6 @@
/*
* Create a regular file.
- * For now, we don't implement O_EXCL.
*/
static int
nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 2a2a0a7..2636c26 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -17,6 +17,7 @@
#include <linux/inet.h>
#include "internal.h"
#include "nfs4_fs.h"
+#include "dns_resolve.h"
#define NFSDBG_FACILITY NFSDBG_VFS
@@ -95,6 +96,20 @@
return 0;
}
+static size_t nfs_parse_server_name(char *string, size_t len,
+ struct sockaddr *sa, size_t salen)
+{
+ ssize_t ret;
+
+ ret = rpc_pton(string, len, sa, salen);
+ if (ret == 0) {
+ ret = nfs_dns_resolve_name(string, len, sa, salen);
+ if (ret < 0)
+ ret = 0;
+ }
+ return ret;
+}
+
static struct vfsmount *try_location(struct nfs_clone_mount *mountdata,
char *page, char *page2,
const struct nfs4_fs_location *location)
@@ -121,11 +136,12 @@
if (memchr(buf->data, IPV6_SCOPE_DELIMITER, buf->len))
continue;
- nfs_parse_ip_address(buf->data, buf->len,
- mountdata->addr, &mountdata->addrlen);
- if (mountdata->addr->sa_family == AF_UNSPEC)
+ mountdata->addrlen = nfs_parse_server_name(buf->data,
+ buf->len,
+ mountdata->addr, mountdata->addrlen);
+ if (mountdata->addrlen == 0)
continue;
- nfs_set_port(mountdata->addr, NFS_PORT);
+ rpc_set_port(mountdata->addr, NFS_PORT);
memcpy(page2, buf->data, buf->len);
page2[buf->len] = '\0';
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 6917311..be6544a 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -61,6 +61,8 @@
#define NFS4_POLL_RETRY_MIN (HZ/10)
#define NFS4_POLL_RETRY_MAX (15*HZ)
+#define NFS4_MAX_LOOP_ON_RECOVER (10)
+
struct nfs4_opendata;
static int _nfs4_proc_open(struct nfs4_opendata *data);
static int nfs4_do_fsinfo(struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *);
@@ -426,17 +428,19 @@
static int nfs4_recover_session(struct nfs4_session *session)
{
struct nfs_client *clp = session->clp;
+ unsigned int loop;
int ret;
- for (;;) {
+ for (loop = NFS4_MAX_LOOP_ON_RECOVER; loop != 0; loop--) {
ret = nfs4_wait_clnt_recover(clp);
if (ret != 0)
- return ret;
+ break;
if (!test_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state))
break;
nfs4_schedule_state_manager(clp);
+ ret = -EIO;
}
- return 0;
+ return ret;
}
static int nfs41_setup_sequence(struct nfs4_session *session,
@@ -1444,18 +1448,20 @@
static int nfs4_recover_expired_lease(struct nfs_server *server)
{
struct nfs_client *clp = server->nfs_client;
+ unsigned int loop;
int ret;
- for (;;) {
+ for (loop = NFS4_MAX_LOOP_ON_RECOVER; loop != 0; loop--) {
ret = nfs4_wait_clnt_recover(clp);
if (ret != 0)
- return ret;
+ break;
if (!test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state) &&
!test_bit(NFS4CLNT_CHECK_LEASE,&clp->cl_state))
break;
nfs4_schedule_state_recovery(clp);
+ ret = -EIO;
}
- return 0;
+ return ret;
}
/*
@@ -1997,12 +2003,34 @@
status = nfs4_call_sync(server, &msg, &args, &res, 0);
if (status == 0) {
memcpy(server->attr_bitmask, res.attr_bitmask, sizeof(server->attr_bitmask));
+ server->caps &= ~(NFS_CAP_ACLS|NFS_CAP_HARDLINKS|
+ NFS_CAP_SYMLINKS|NFS_CAP_FILEID|
+ NFS_CAP_MODE|NFS_CAP_NLINK|NFS_CAP_OWNER|
+ NFS_CAP_OWNER_GROUP|NFS_CAP_ATIME|
+ NFS_CAP_CTIME|NFS_CAP_MTIME);
if (res.attr_bitmask[0] & FATTR4_WORD0_ACL)
server->caps |= NFS_CAP_ACLS;
if (res.has_links != 0)
server->caps |= NFS_CAP_HARDLINKS;
if (res.has_symlinks != 0)
server->caps |= NFS_CAP_SYMLINKS;
+ if (res.attr_bitmask[0] & FATTR4_WORD0_FILEID)
+ server->caps |= NFS_CAP_FILEID;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_MODE)
+ server->caps |= NFS_CAP_MODE;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_NUMLINKS)
+ server->caps |= NFS_CAP_NLINK;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_OWNER)
+ server->caps |= NFS_CAP_OWNER;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_OWNER_GROUP)
+ server->caps |= NFS_CAP_OWNER_GROUP;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_TIME_ACCESS)
+ server->caps |= NFS_CAP_ATIME;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_TIME_METADATA)
+ server->caps |= NFS_CAP_CTIME;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_TIME_MODIFY)
+ server->caps |= NFS_CAP_MTIME;
+
memcpy(server->cache_consistency_bitmask, res.attr_bitmask, sizeof(server->cache_consistency_bitmask));
server->cache_consistency_bitmask[0] &= FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE;
server->cache_consistency_bitmask[1] &= FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY;
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 65ca8c1..1434080 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1250,8 +1250,8 @@
continue;
}
/* Initialize or reset the session */
- if (nfs4_has_session(clp) &&
- test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) {
+ if (test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)
+ && nfs4_has_session(clp)) {
if (clp->cl_cons_state == NFS_CS_SESSION_INITING)
status = nfs4_initialize_session(clp);
else
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 617273e..cfc30d3 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -702,29 +702,12 @@
u32 minorversion;
};
-/*
- * START OF "GENERIC" ENCODE ROUTINES.
- * These may look a little ugly since they are imported from a "generic"
- * set of XDR encode/decode routines which are intended to be shared by
- * all of our NFSv4 implementations (OpenBSD, MacOS X...).
- *
- * If the pain of reading these is too great, it should be a straightforward
- * task to translate them into Linux-specific versions which are more
- * consistent with the style used in NFSv2/v3...
- */
-#define WRITE32(n) *p++ = htonl(n)
-#define WRITE64(n) do { \
- *p++ = htonl((uint32_t)((n) >> 32)); \
- *p++ = htonl((uint32_t)(n)); \
-} while (0)
-#define WRITEMEM(ptr,nbytes) do { \
- p = xdr_encode_opaque_fixed(p, ptr, nbytes); \
-} while (0)
-
-#define RESERVE_SPACE(nbytes) do { \
- p = xdr_reserve_space(xdr, nbytes); \
- BUG_ON(!p); \
-} while (0)
+static __be32 *reserve_space(struct xdr_stream *xdr, size_t nbytes)
+{
+ __be32 *p = xdr_reserve_space(xdr, nbytes);
+ BUG_ON(!p);
+ return p;
+}
static void encode_string(struct xdr_stream *xdr, unsigned int len, const char *str)
{
@@ -749,12 +732,11 @@
dprintk("encode_compound: tag=%.*s\n", (int)hdr->taglen, hdr->tag);
BUG_ON(hdr->taglen > NFS4_MAXTAGLEN);
- RESERVE_SPACE(12+(XDR_QUADLEN(hdr->taglen)<<2));
- WRITE32(hdr->taglen);
- WRITEMEM(hdr->tag, hdr->taglen);
- WRITE32(hdr->minorversion);
+ p = reserve_space(xdr, 4 + hdr->taglen + 8);
+ p = xdr_encode_opaque(p, hdr->tag, hdr->taglen);
+ *p++ = cpu_to_be32(hdr->minorversion);
hdr->nops_p = p;
- WRITE32(hdr->nops);
+ *p = cpu_to_be32(hdr->nops);
}
static void encode_nops(struct compound_hdr *hdr)
@@ -829,55 +811,53 @@
len += 16;
else if (iap->ia_valid & ATTR_MTIME)
len += 4;
- RESERVE_SPACE(len);
+ p = reserve_space(xdr, len);
/*
* We write the bitmap length now, but leave the bitmap and the attribute
* buffer length to be backfilled at the end of this routine.
*/
- WRITE32(2);
+ *p++ = cpu_to_be32(2);
q = p;
p += 3;
if (iap->ia_valid & ATTR_SIZE) {
bmval0 |= FATTR4_WORD0_SIZE;
- WRITE64(iap->ia_size);
+ p = xdr_encode_hyper(p, iap->ia_size);
}
if (iap->ia_valid & ATTR_MODE) {
bmval1 |= FATTR4_WORD1_MODE;
- WRITE32(iap->ia_mode & S_IALLUGO);
+ *p++ = cpu_to_be32(iap->ia_mode & S_IALLUGO);
}
if (iap->ia_valid & ATTR_UID) {
bmval1 |= FATTR4_WORD1_OWNER;
- WRITE32(owner_namelen);
- WRITEMEM(owner_name, owner_namelen);
+ p = xdr_encode_opaque(p, owner_name, owner_namelen);
}
if (iap->ia_valid & ATTR_GID) {
bmval1 |= FATTR4_WORD1_OWNER_GROUP;
- WRITE32(owner_grouplen);
- WRITEMEM(owner_group, owner_grouplen);
+ p = xdr_encode_opaque(p, owner_group, owner_grouplen);
}
if (iap->ia_valid & ATTR_ATIME_SET) {
bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
- WRITE32(NFS4_SET_TO_CLIENT_TIME);
- WRITE32(0);
- WRITE32(iap->ia_mtime.tv_sec);
- WRITE32(iap->ia_mtime.tv_nsec);
+ *p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
+ *p++ = cpu_to_be32(0);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
}
else if (iap->ia_valid & ATTR_ATIME) {
bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
- WRITE32(NFS4_SET_TO_SERVER_TIME);
+ *p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
}
if (iap->ia_valid & ATTR_MTIME_SET) {
bmval1 |= FATTR4_WORD1_TIME_MODIFY_SET;
- WRITE32(NFS4_SET_TO_CLIENT_TIME);
- WRITE32(0);
- WRITE32(iap->ia_mtime.tv_sec);
- WRITE32(iap->ia_mtime.tv_nsec);
+ *p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
+ *p++ = cpu_to_be32(0);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
}
else if (iap->ia_valid & ATTR_MTIME) {
bmval1 |= FATTR4_WORD1_TIME_MODIFY_SET;
- WRITE32(NFS4_SET_TO_SERVER_TIME);
+ *p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
}
/*
@@ -891,7 +871,7 @@
len = (char *)p - (char *)q - 12;
*q++ = htonl(bmval0);
*q++ = htonl(bmval1);
- *q++ = htonl(len);
+ *q = htonl(len);
/* out: */
}
@@ -900,9 +880,9 @@
{
__be32 *p;
- RESERVE_SPACE(8);
- WRITE32(OP_ACCESS);
- WRITE32(access);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(OP_ACCESS);
+ *p = cpu_to_be32(access);
hdr->nops++;
hdr->replen += decode_access_maxsz;
}
@@ -911,10 +891,10 @@
{
__be32 *p;
- RESERVE_SPACE(8+NFS4_STATEID_SIZE);
- WRITE32(OP_CLOSE);
- WRITE32(arg->seqid->sequence->counter);
- WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 8+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_CLOSE);
+ *p++ = cpu_to_be32(arg->seqid->sequence->counter);
+ xdr_encode_opaque_fixed(p, arg->stateid->data, NFS4_STATEID_SIZE);
hdr->nops++;
hdr->replen += decode_close_maxsz;
}
@@ -923,10 +903,10 @@
{
__be32 *p;
- RESERVE_SPACE(16);
- WRITE32(OP_COMMIT);
- WRITE64(args->offset);
- WRITE32(args->count);
+ p = reserve_space(xdr, 16);
+ *p++ = cpu_to_be32(OP_COMMIT);
+ p = xdr_encode_hyper(p, args->offset);
+ *p = cpu_to_be32(args->count);
hdr->nops++;
hdr->replen += decode_commit_maxsz;
}
@@ -935,30 +915,28 @@
{
__be32 *p;
- RESERVE_SPACE(8);
- WRITE32(OP_CREATE);
- WRITE32(create->ftype);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(OP_CREATE);
+ *p = cpu_to_be32(create->ftype);
switch (create->ftype) {
case NF4LNK:
- RESERVE_SPACE(4);
- WRITE32(create->u.symlink.len);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(create->u.symlink.len);
xdr_write_pages(xdr, create->u.symlink.pages, 0, create->u.symlink.len);
break;
case NF4BLK: case NF4CHR:
- RESERVE_SPACE(8);
- WRITE32(create->u.device.specdata1);
- WRITE32(create->u.device.specdata2);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(create->u.device.specdata1);
+ *p = cpu_to_be32(create->u.device.specdata2);
break;
default:
break;
}
- RESERVE_SPACE(4 + create->name->len);
- WRITE32(create->name->len);
- WRITEMEM(create->name->name, create->name->len);
+ encode_string(xdr, create->name->len, create->name->name);
hdr->nops++;
hdr->replen += decode_create_maxsz;
@@ -969,10 +947,10 @@
{
__be32 *p;
- RESERVE_SPACE(12);
- WRITE32(OP_GETATTR);
- WRITE32(1);
- WRITE32(bitmap);
+ p = reserve_space(xdr, 12);
+ *p++ = cpu_to_be32(OP_GETATTR);
+ *p++ = cpu_to_be32(1);
+ *p = cpu_to_be32(bitmap);
hdr->nops++;
hdr->replen += decode_getattr_maxsz;
}
@@ -981,11 +959,11 @@
{
__be32 *p;
- RESERVE_SPACE(16);
- WRITE32(OP_GETATTR);
- WRITE32(2);
- WRITE32(bm0);
- WRITE32(bm1);
+ p = reserve_space(xdr, 16);
+ *p++ = cpu_to_be32(OP_GETATTR);
+ *p++ = cpu_to_be32(2);
+ *p++ = cpu_to_be32(bm0);
+ *p = cpu_to_be32(bm1);
hdr->nops++;
hdr->replen += decode_getattr_maxsz;
}
@@ -1012,8 +990,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_GETFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_GETFH);
hdr->nops++;
hdr->replen += decode_getfh_maxsz;
}
@@ -1022,10 +1000,9 @@
{
__be32 *p;
- RESERVE_SPACE(8 + name->len);
- WRITE32(OP_LINK);
- WRITE32(name->len);
- WRITEMEM(name->name, name->len);
+ p = reserve_space(xdr, 8 + name->len);
+ *p++ = cpu_to_be32(OP_LINK);
+ xdr_encode_opaque(p, name->name, name->len);
hdr->nops++;
hdr->replen += decode_link_maxsz;
}
@@ -1052,27 +1029,27 @@
{
__be32 *p;
- RESERVE_SPACE(32);
- WRITE32(OP_LOCK);
- WRITE32(nfs4_lock_type(args->fl, args->block));
- WRITE32(args->reclaim);
- WRITE64(args->fl->fl_start);
- WRITE64(nfs4_lock_length(args->fl));
- WRITE32(args->new_lock_owner);
+ p = reserve_space(xdr, 32);
+ *p++ = cpu_to_be32(OP_LOCK);
+ *p++ = cpu_to_be32(nfs4_lock_type(args->fl, args->block));
+ *p++ = cpu_to_be32(args->reclaim);
+ p = xdr_encode_hyper(p, args->fl->fl_start);
+ p = xdr_encode_hyper(p, nfs4_lock_length(args->fl));
+ *p = cpu_to_be32(args->new_lock_owner);
if (args->new_lock_owner){
- RESERVE_SPACE(4+NFS4_STATEID_SIZE+32);
- WRITE32(args->open_seqid->sequence->counter);
- WRITEMEM(args->open_stateid->data, NFS4_STATEID_SIZE);
- WRITE32(args->lock_seqid->sequence->counter);
- WRITE64(args->lock_owner.clientid);
- WRITE32(16);
- WRITEMEM("lock id:", 8);
- WRITE64(args->lock_owner.id);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+32);
+ *p++ = cpu_to_be32(args->open_seqid->sequence->counter);
+ p = xdr_encode_opaque_fixed(p, args->open_stateid->data, NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(args->lock_seqid->sequence->counter);
+ p = xdr_encode_hyper(p, args->lock_owner.clientid);
+ *p++ = cpu_to_be32(16);
+ p = xdr_encode_opaque_fixed(p, "lock id:", 8);
+ xdr_encode_hyper(p, args->lock_owner.id);
}
else {
- RESERVE_SPACE(NFS4_STATEID_SIZE+4);
- WRITEMEM(args->lock_stateid->data, NFS4_STATEID_SIZE);
- WRITE32(args->lock_seqid->sequence->counter);
+ p = reserve_space(xdr, NFS4_STATEID_SIZE+4);
+ p = xdr_encode_opaque_fixed(p, args->lock_stateid->data, NFS4_STATEID_SIZE);
+ *p = cpu_to_be32(args->lock_seqid->sequence->counter);
}
hdr->nops++;
hdr->replen += decode_lock_maxsz;
@@ -1082,15 +1059,15 @@
{
__be32 *p;
- RESERVE_SPACE(52);
- WRITE32(OP_LOCKT);
- WRITE32(nfs4_lock_type(args->fl, 0));
- WRITE64(args->fl->fl_start);
- WRITE64(nfs4_lock_length(args->fl));
- WRITE64(args->lock_owner.clientid);
- WRITE32(16);
- WRITEMEM("lock id:", 8);
- WRITE64(args->lock_owner.id);
+ p = reserve_space(xdr, 52);
+ *p++ = cpu_to_be32(OP_LOCKT);
+ *p++ = cpu_to_be32(nfs4_lock_type(args->fl, 0));
+ p = xdr_encode_hyper(p, args->fl->fl_start);
+ p = xdr_encode_hyper(p, nfs4_lock_length(args->fl));
+ p = xdr_encode_hyper(p, args->lock_owner.clientid);
+ *p++ = cpu_to_be32(16);
+ p = xdr_encode_opaque_fixed(p, "lock id:", 8);
+ xdr_encode_hyper(p, args->lock_owner.id);
hdr->nops++;
hdr->replen += decode_lockt_maxsz;
}
@@ -1099,13 +1076,13 @@
{
__be32 *p;
- RESERVE_SPACE(12+NFS4_STATEID_SIZE+16);
- WRITE32(OP_LOCKU);
- WRITE32(nfs4_lock_type(args->fl, 0));
- WRITE32(args->seqid->sequence->counter);
- WRITEMEM(args->stateid->data, NFS4_STATEID_SIZE);
- WRITE64(args->fl->fl_start);
- WRITE64(nfs4_lock_length(args->fl));
+ p = reserve_space(xdr, 12+NFS4_STATEID_SIZE+16);
+ *p++ = cpu_to_be32(OP_LOCKU);
+ *p++ = cpu_to_be32(nfs4_lock_type(args->fl, 0));
+ *p++ = cpu_to_be32(args->seqid->sequence->counter);
+ p = xdr_encode_opaque_fixed(p, args->stateid->data, NFS4_STATEID_SIZE);
+ p = xdr_encode_hyper(p, args->fl->fl_start);
+ xdr_encode_hyper(p, nfs4_lock_length(args->fl));
hdr->nops++;
hdr->replen += decode_locku_maxsz;
}
@@ -1115,10 +1092,9 @@
int len = name->len;
__be32 *p;
- RESERVE_SPACE(8 + len);
- WRITE32(OP_LOOKUP);
- WRITE32(len);
- WRITEMEM(name->name, len);
+ p = reserve_space(xdr, 8 + len);
+ *p++ = cpu_to_be32(OP_LOOKUP);
+ xdr_encode_opaque(p, name->name, len);
hdr->nops++;
hdr->replen += decode_lookup_maxsz;
}
@@ -1127,21 +1103,21 @@
{
__be32 *p;
- RESERVE_SPACE(8);
+ p = reserve_space(xdr, 8);
switch (fmode & (FMODE_READ|FMODE_WRITE)) {
case FMODE_READ:
- WRITE32(NFS4_SHARE_ACCESS_READ);
+ *p++ = cpu_to_be32(NFS4_SHARE_ACCESS_READ);
break;
case FMODE_WRITE:
- WRITE32(NFS4_SHARE_ACCESS_WRITE);
+ *p++ = cpu_to_be32(NFS4_SHARE_ACCESS_WRITE);
break;
case FMODE_READ|FMODE_WRITE:
- WRITE32(NFS4_SHARE_ACCESS_BOTH);
+ *p++ = cpu_to_be32(NFS4_SHARE_ACCESS_BOTH);
break;
default:
- WRITE32(0);
+ *p++ = cpu_to_be32(0);
}
- WRITE32(0); /* for linux, share_deny = 0 always */
+ *p = cpu_to_be32(0); /* for linux, share_deny = 0 always */
}
static inline void encode_openhdr(struct xdr_stream *xdr, const struct nfs_openargs *arg)
@@ -1151,29 +1127,29 @@
* opcode 4, seqid 4, share_access 4, share_deny 4, clientid 8, ownerlen 4,
* owner 4 = 32
*/
- RESERVE_SPACE(8);
- WRITE32(OP_OPEN);
- WRITE32(arg->seqid->sequence->counter);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(OP_OPEN);
+ *p = cpu_to_be32(arg->seqid->sequence->counter);
encode_share_access(xdr, arg->fmode);
- RESERVE_SPACE(28);
- WRITE64(arg->clientid);
- WRITE32(16);
- WRITEMEM("open id:", 8);
- WRITE64(arg->id);
+ p = reserve_space(xdr, 28);
+ p = xdr_encode_hyper(p, arg->clientid);
+ *p++ = cpu_to_be32(16);
+ p = xdr_encode_opaque_fixed(p, "open id:", 8);
+ xdr_encode_hyper(p, arg->id);
}
static inline void encode_createmode(struct xdr_stream *xdr, const struct nfs_openargs *arg)
{
__be32 *p;
- RESERVE_SPACE(4);
+ p = reserve_space(xdr, 4);
switch(arg->open_flags & O_EXCL) {
case 0:
- WRITE32(NFS4_CREATE_UNCHECKED);
+ *p = cpu_to_be32(NFS4_CREATE_UNCHECKED);
encode_attrs(xdr, arg->u.attrs, arg->server);
break;
default:
- WRITE32(NFS4_CREATE_EXCLUSIVE);
+ *p = cpu_to_be32(NFS4_CREATE_EXCLUSIVE);
encode_nfs4_verifier(xdr, &arg->u.verifier);
}
}
@@ -1182,14 +1158,14 @@
{
__be32 *p;
- RESERVE_SPACE(4);
+ p = reserve_space(xdr, 4);
switch (arg->open_flags & O_CREAT) {
case 0:
- WRITE32(NFS4_OPEN_NOCREATE);
+ *p = cpu_to_be32(NFS4_OPEN_NOCREATE);
break;
default:
BUG_ON(arg->claim != NFS4_OPEN_CLAIM_NULL);
- WRITE32(NFS4_OPEN_CREATE);
+ *p = cpu_to_be32(NFS4_OPEN_CREATE);
encode_createmode(xdr, arg);
}
}
@@ -1198,16 +1174,16 @@
{
__be32 *p;
- RESERVE_SPACE(4);
+ p = reserve_space(xdr, 4);
switch (delegation_type) {
case 0:
- WRITE32(NFS4_OPEN_DELEGATE_NONE);
+ *p = cpu_to_be32(NFS4_OPEN_DELEGATE_NONE);
break;
case FMODE_READ:
- WRITE32(NFS4_OPEN_DELEGATE_READ);
+ *p = cpu_to_be32(NFS4_OPEN_DELEGATE_READ);
break;
case FMODE_WRITE|FMODE_READ:
- WRITE32(NFS4_OPEN_DELEGATE_WRITE);
+ *p = cpu_to_be32(NFS4_OPEN_DELEGATE_WRITE);
break;
default:
BUG();
@@ -1218,8 +1194,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(NFS4_OPEN_CLAIM_NULL);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(NFS4_OPEN_CLAIM_NULL);
encode_string(xdr, name->len, name->name);
}
@@ -1227,8 +1203,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(NFS4_OPEN_CLAIM_PREVIOUS);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(NFS4_OPEN_CLAIM_PREVIOUS);
encode_delegation_type(xdr, type);
}
@@ -1236,9 +1212,9 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
- WRITE32(NFS4_OPEN_CLAIM_DELEGATE_CUR);
- WRITEMEM(stateid->data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(NFS4_OPEN_CLAIM_DELEGATE_CUR);
+ xdr_encode_opaque_fixed(p, stateid->data, NFS4_STATEID_SIZE);
encode_string(xdr, name->len, name->name);
}
@@ -1267,10 +1243,10 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE+4);
- WRITE32(OP_OPEN_CONFIRM);
- WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
- WRITE32(arg->seqid->sequence->counter);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+4);
+ *p++ = cpu_to_be32(OP_OPEN_CONFIRM);
+ p = xdr_encode_opaque_fixed(p, arg->stateid->data, NFS4_STATEID_SIZE);
+ *p = cpu_to_be32(arg->seqid->sequence->counter);
hdr->nops++;
hdr->replen += decode_open_confirm_maxsz;
}
@@ -1279,10 +1255,10 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE+4);
- WRITE32(OP_OPEN_DOWNGRADE);
- WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
- WRITE32(arg->seqid->sequence->counter);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+4);
+ *p++ = cpu_to_be32(OP_OPEN_DOWNGRADE);
+ p = xdr_encode_opaque_fixed(p, arg->stateid->data, NFS4_STATEID_SIZE);
+ *p = cpu_to_be32(arg->seqid->sequence->counter);
encode_share_access(xdr, arg->fmode);
hdr->nops++;
hdr->replen += decode_open_downgrade_maxsz;
@@ -1294,10 +1270,9 @@
int len = fh->size;
__be32 *p;
- RESERVE_SPACE(8 + len);
- WRITE32(OP_PUTFH);
- WRITE32(len);
- WRITEMEM(fh->data, len);
+ p = reserve_space(xdr, 8 + len);
+ *p++ = cpu_to_be32(OP_PUTFH);
+ xdr_encode_opaque(p, fh->data, len);
hdr->nops++;
hdr->replen += decode_putfh_maxsz;
}
@@ -1306,8 +1281,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_PUTROOTFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_PUTROOTFH);
hdr->nops++;
hdr->replen += decode_putrootfh_maxsz;
}
@@ -1317,26 +1292,26 @@
nfs4_stateid stateid;
__be32 *p;
- RESERVE_SPACE(NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, NFS4_STATEID_SIZE);
if (ctx->state != NULL) {
nfs4_copy_stateid(&stateid, ctx->state, ctx->lockowner);
- WRITEMEM(stateid.data, NFS4_STATEID_SIZE);
+ xdr_encode_opaque_fixed(p, stateid.data, NFS4_STATEID_SIZE);
} else
- WRITEMEM(zero_stateid.data, NFS4_STATEID_SIZE);
+ xdr_encode_opaque_fixed(p, zero_stateid.data, NFS4_STATEID_SIZE);
}
static void encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args, struct compound_hdr *hdr)
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_READ);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_READ);
encode_stateid(xdr, args->context);
- RESERVE_SPACE(12);
- WRITE64(args->offset);
- WRITE32(args->count);
+ p = reserve_space(xdr, 12);
+ p = xdr_encode_hyper(p, args->offset);
+ *p = cpu_to_be32(args->count);
hdr->nops++;
hdr->replen += decode_read_maxsz;
}
@@ -1349,20 +1324,20 @@
};
__be32 *p;
- RESERVE_SPACE(12+NFS4_VERIFIER_SIZE+20);
- WRITE32(OP_READDIR);
- WRITE64(readdir->cookie);
- WRITEMEM(readdir->verifier.data, NFS4_VERIFIER_SIZE);
- WRITE32(readdir->count >> 1); /* We're not doing readdirplus */
- WRITE32(readdir->count);
- WRITE32(2);
+ p = reserve_space(xdr, 12+NFS4_VERIFIER_SIZE+20);
+ *p++ = cpu_to_be32(OP_READDIR);
+ p = xdr_encode_hyper(p, readdir->cookie);
+ p = xdr_encode_opaque_fixed(p, readdir->verifier.data, NFS4_VERIFIER_SIZE);
+ *p++ = cpu_to_be32(readdir->count >> 1); /* We're not doing readdirplus */
+ *p++ = cpu_to_be32(readdir->count);
+ *p++ = cpu_to_be32(2);
/* Switch to mounted_on_fileid if the server supports it */
if (readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)
attrs[0] &= ~FATTR4_WORD0_FILEID;
else
attrs[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
- WRITE32(attrs[0] & readdir->bitmask[0]);
- WRITE32(attrs[1] & readdir->bitmask[1]);
+ *p++ = cpu_to_be32(attrs[0] & readdir->bitmask[0]);
+ *p = cpu_to_be32(attrs[1] & readdir->bitmask[1]);
hdr->nops++;
hdr->replen += decode_readdir_maxsz;
dprintk("%s: cookie = %Lu, verifier = %08x:%08x, bitmap = %08x:%08x\n",
@@ -1378,8 +1353,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_READLINK);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_READLINK);
hdr->nops++;
hdr->replen += decode_readlink_maxsz;
}
@@ -1388,10 +1363,9 @@
{
__be32 *p;
- RESERVE_SPACE(8 + name->len);
- WRITE32(OP_REMOVE);
- WRITE32(name->len);
- WRITEMEM(name->name, name->len);
+ p = reserve_space(xdr, 8 + name->len);
+ *p++ = cpu_to_be32(OP_REMOVE);
+ xdr_encode_opaque(p, name->name, name->len);
hdr->nops++;
hdr->replen += decode_remove_maxsz;
}
@@ -1400,14 +1374,10 @@
{
__be32 *p;
- RESERVE_SPACE(8 + oldname->len);
- WRITE32(OP_RENAME);
- WRITE32(oldname->len);
- WRITEMEM(oldname->name, oldname->len);
-
- RESERVE_SPACE(4 + newname->len);
- WRITE32(newname->len);
- WRITEMEM(newname->name, newname->len);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_RENAME);
+ encode_string(xdr, oldname->len, oldname->name);
+ encode_string(xdr, newname->len, newname->name);
hdr->nops++;
hdr->replen += decode_rename_maxsz;
}
@@ -1416,9 +1386,9 @@
{
__be32 *p;
- RESERVE_SPACE(12);
- WRITE32(OP_RENEW);
- WRITE64(client_stateid->cl_clientid);
+ p = reserve_space(xdr, 12);
+ *p++ = cpu_to_be32(OP_RENEW);
+ xdr_encode_hyper(p, client_stateid->cl_clientid);
hdr->nops++;
hdr->replen += decode_renew_maxsz;
}
@@ -1428,8 +1398,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_RESTOREFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_RESTOREFH);
hdr->nops++;
hdr->replen += decode_restorefh_maxsz;
}
@@ -1439,16 +1409,16 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
- WRITE32(OP_SETATTR);
- WRITEMEM(zero_stateid.data, NFS4_STATEID_SIZE);
- RESERVE_SPACE(2*4);
- WRITE32(1);
- WRITE32(FATTR4_WORD0_ACL);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_SETATTR);
+ xdr_encode_opaque_fixed(p, zero_stateid.data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 2*4);
+ *p++ = cpu_to_be32(1);
+ *p = cpu_to_be32(FATTR4_WORD0_ACL);
if (arg->acl_len % 4)
return -EINVAL;
- RESERVE_SPACE(4);
- WRITE32(arg->acl_len);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(arg->acl_len);
xdr_write_pages(xdr, arg->acl_pages, arg->acl_pgbase, arg->acl_len);
hdr->nops++;
hdr->replen += decode_setacl_maxsz;
@@ -1460,8 +1430,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_SAVEFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_SAVEFH);
hdr->nops++;
hdr->replen += decode_savefh_maxsz;
}
@@ -1470,9 +1440,9 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
- WRITE32(OP_SETATTR);
- WRITEMEM(arg->stateid.data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_SETATTR);
+ xdr_encode_opaque_fixed(p, arg->stateid.data, NFS4_STATEID_SIZE);
hdr->nops++;
hdr->replen += decode_setattr_maxsz;
encode_attrs(xdr, arg->iap, server);
@@ -1482,17 +1452,17 @@
{
__be32 *p;
- RESERVE_SPACE(4 + NFS4_VERIFIER_SIZE);
- WRITE32(OP_SETCLIENTID);
- WRITEMEM(setclientid->sc_verifier->data, NFS4_VERIFIER_SIZE);
+ p = reserve_space(xdr, 4 + NFS4_VERIFIER_SIZE);
+ *p++ = cpu_to_be32(OP_SETCLIENTID);
+ xdr_encode_opaque_fixed(p, setclientid->sc_verifier->data, NFS4_VERIFIER_SIZE);
encode_string(xdr, setclientid->sc_name_len, setclientid->sc_name);
- RESERVE_SPACE(4);
- WRITE32(setclientid->sc_prog);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(setclientid->sc_prog);
encode_string(xdr, setclientid->sc_netid_len, setclientid->sc_netid);
encode_string(xdr, setclientid->sc_uaddr_len, setclientid->sc_uaddr);
- RESERVE_SPACE(4);
- WRITE32(setclientid->sc_cb_ident);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(setclientid->sc_cb_ident);
hdr->nops++;
hdr->replen += decode_setclientid_maxsz;
}
@@ -1501,10 +1471,10 @@
{
__be32 *p;
- RESERVE_SPACE(12 + NFS4_VERIFIER_SIZE);
- WRITE32(OP_SETCLIENTID_CONFIRM);
- WRITE64(client_state->cl_clientid);
- WRITEMEM(client_state->cl_confirm.data, NFS4_VERIFIER_SIZE);
+ p = reserve_space(xdr, 12 + NFS4_VERIFIER_SIZE);
+ *p++ = cpu_to_be32(OP_SETCLIENTID_CONFIRM);
+ p = xdr_encode_hyper(p, client_state->cl_clientid);
+ xdr_encode_opaque_fixed(p, client_state->cl_confirm.data, NFS4_VERIFIER_SIZE);
hdr->nops++;
hdr->replen += decode_setclientid_confirm_maxsz;
}
@@ -1513,15 +1483,15 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_WRITE);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_WRITE);
encode_stateid(xdr, args->context);
- RESERVE_SPACE(16);
- WRITE64(args->offset);
- WRITE32(args->stable);
- WRITE32(args->count);
+ p = reserve_space(xdr, 16);
+ p = xdr_encode_hyper(p, args->offset);
+ *p++ = cpu_to_be32(args->stable);
+ *p = cpu_to_be32(args->count);
xdr_write_pages(xdr, args->pages, args->pgbase, args->count);
hdr->nops++;
@@ -1532,10 +1502,10 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
- WRITE32(OP_DELEGRETURN);
- WRITEMEM(stateid->data, NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_DELEGRETURN);
+ xdr_encode_opaque_fixed(p, stateid->data, NFS4_STATEID_SIZE);
hdr->nops++;
hdr->replen += decode_delegreturn_maxsz;
}
@@ -1548,16 +1518,16 @@
{
__be32 *p;
- RESERVE_SPACE(4 + sizeof(args->verifier->data));
- WRITE32(OP_EXCHANGE_ID);
- WRITEMEM(args->verifier->data, sizeof(args->verifier->data));
+ p = reserve_space(xdr, 4 + sizeof(args->verifier->data));
+ *p++ = cpu_to_be32(OP_EXCHANGE_ID);
+ xdr_encode_opaque_fixed(p, args->verifier->data, sizeof(args->verifier->data));
encode_string(xdr, args->id_len, args->id);
- RESERVE_SPACE(12);
- WRITE32(args->flags);
- WRITE32(0); /* zero length state_protect4_a */
- WRITE32(0); /* zero length implementation id array */
+ p = reserve_space(xdr, 12);
+ *p++ = cpu_to_be32(args->flags);
+ *p++ = cpu_to_be32(0); /* zero length state_protect4_a */
+ *p = cpu_to_be32(0); /* zero length implementation id array */
hdr->nops++;
hdr->replen += decode_exchange_id_maxsz;
}
@@ -1571,55 +1541,43 @@
uint32_t len;
struct nfs_client *clp = args->client;
- RESERVE_SPACE(4);
- WRITE32(OP_CREATE_SESSION);
-
- RESERVE_SPACE(8);
- WRITE64(clp->cl_ex_clid);
-
- RESERVE_SPACE(8);
- WRITE32(clp->cl_seqid); /*Sequence id */
- WRITE32(args->flags); /*flags */
-
- RESERVE_SPACE(2*28); /* 2 channel_attrs */
- /* Fore Channel */
- WRITE32(args->fc_attrs.headerpadsz); /* header padding size */
- WRITE32(args->fc_attrs.max_rqst_sz); /* max req size */
- WRITE32(args->fc_attrs.max_resp_sz); /* max resp size */
- WRITE32(args->fc_attrs.max_resp_sz_cached); /* Max resp sz cached */
- WRITE32(args->fc_attrs.max_ops); /* max operations */
- WRITE32(args->fc_attrs.max_reqs); /* max requests */
- WRITE32(0); /* rdmachannel_attrs */
-
- /* Back Channel */
- WRITE32(args->fc_attrs.headerpadsz); /* header padding size */
- WRITE32(args->bc_attrs.max_rqst_sz); /* max req size */
- WRITE32(args->bc_attrs.max_resp_sz); /* max resp size */
- WRITE32(args->bc_attrs.max_resp_sz_cached); /* Max resp sz cached */
- WRITE32(args->bc_attrs.max_ops); /* max operations */
- WRITE32(args->bc_attrs.max_reqs); /* max requests */
- WRITE32(0); /* rdmachannel_attrs */
-
- RESERVE_SPACE(4);
- WRITE32(args->cb_program); /* cb_program */
-
- RESERVE_SPACE(4); /* # of security flavors */
- WRITE32(1);
-
- RESERVE_SPACE(4);
- WRITE32(RPC_AUTH_UNIX); /* auth_sys */
-
- /* authsys_parms rfc1831 */
- RESERVE_SPACE(4);
- WRITE32((u32)clp->cl_boot_time.tv_nsec); /* stamp */
len = scnprintf(machine_name, sizeof(machine_name), "%s",
clp->cl_ipaddr);
- RESERVE_SPACE(16 + len);
- WRITE32(len);
- WRITEMEM(machine_name, len);
- WRITE32(0); /* UID */
- WRITE32(0); /* GID */
- WRITE32(0); /* No more gids */
+
+ p = reserve_space(xdr, 20 + 2*28 + 20 + len + 12);
+ *p++ = cpu_to_be32(OP_CREATE_SESSION);
+ p = xdr_encode_hyper(p, clp->cl_ex_clid);
+ *p++ = cpu_to_be32(clp->cl_seqid); /*Sequence id */
+ *p++ = cpu_to_be32(args->flags); /*flags */
+
+ /* Fore Channel */
+ *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */
+ *p++ = cpu_to_be32(args->fc_attrs.max_rqst_sz); /* max req size */
+ *p++ = cpu_to_be32(args->fc_attrs.max_resp_sz); /* max resp size */
+ *p++ = cpu_to_be32(args->fc_attrs.max_resp_sz_cached); /* Max resp sz cached */
+ *p++ = cpu_to_be32(args->fc_attrs.max_ops); /* max operations */
+ *p++ = cpu_to_be32(args->fc_attrs.max_reqs); /* max requests */
+ *p++ = cpu_to_be32(0); /* rdmachannel_attrs */
+
+ /* Back Channel */
+ *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */
+ *p++ = cpu_to_be32(args->bc_attrs.max_rqst_sz); /* max req size */
+ *p++ = cpu_to_be32(args->bc_attrs.max_resp_sz); /* max resp size */
+ *p++ = cpu_to_be32(args->bc_attrs.max_resp_sz_cached); /* Max resp sz cached */
+ *p++ = cpu_to_be32(args->bc_attrs.max_ops); /* max operations */
+ *p++ = cpu_to_be32(args->bc_attrs.max_reqs); /* max requests */
+ *p++ = cpu_to_be32(0); /* rdmachannel_attrs */
+
+ *p++ = cpu_to_be32(args->cb_program); /* cb_program */
+ *p++ = cpu_to_be32(1);
+ *p++ = cpu_to_be32(RPC_AUTH_UNIX); /* auth_sys */
+
+ /* authsys_parms rfc1831 */
+ *p++ = cpu_to_be32((u32)clp->cl_boot_time.tv_nsec); /* stamp */
+ p = xdr_encode_opaque(p, machine_name, len);
+ *p++ = cpu_to_be32(0); /* UID */
+ *p++ = cpu_to_be32(0); /* GID */
+ *p = cpu_to_be32(0); /* No more gids */
hdr->nops++;
hdr->replen += decode_create_session_maxsz;
}
@@ -1629,9 +1587,9 @@
struct compound_hdr *hdr)
{
__be32 *p;
- RESERVE_SPACE(4 + NFS4_MAX_SESSIONID_LEN);
- WRITE32(OP_DESTROY_SESSION);
- WRITEMEM(session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
+ p = reserve_space(xdr, 4 + NFS4_MAX_SESSIONID_LEN);
+ *p++ = cpu_to_be32(OP_DESTROY_SESSION);
+ xdr_encode_opaque_fixed(p, session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
hdr->nops++;
hdr->replen += decode_destroy_session_maxsz;
}
@@ -1655,8 +1613,8 @@
WARN_ON(args->sa_slotid == NFS4_MAX_SLOT_TABLE);
slot = tp->slots + args->sa_slotid;
- RESERVE_SPACE(4);
- WRITE32(OP_SEQUENCE);
+ p = reserve_space(xdr, 4 + NFS4_MAX_SESSIONID_LEN + 16);
+ *p++ = cpu_to_be32(OP_SEQUENCE);
/*
* Sessionid + seqid + slotid + max slotid + cache_this
@@ -1670,12 +1628,11 @@
((u32 *)session->sess_id.data)[3],
slot->seq_nr, args->sa_slotid,
tp->highest_used_slotid, args->sa_cache_this);
- RESERVE_SPACE(NFS4_MAX_SESSIONID_LEN + 16);
- WRITEMEM(session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
- WRITE32(slot->seq_nr);
- WRITE32(args->sa_slotid);
- WRITE32(tp->highest_used_slotid);
- WRITE32(args->sa_cache_this);
+ p = xdr_encode_opaque_fixed(p, session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
+ *p++ = cpu_to_be32(slot->seq_nr);
+ *p++ = cpu_to_be32(args->sa_slotid);
+ *p++ = cpu_to_be32(tp->highest_used_slotid);
+ *p = cpu_to_be32(args->sa_cache_this);
hdr->nops++;
hdr->replen += decode_sequence_maxsz;
#endif /* CONFIG_NFS_V4_1 */
@@ -2466,68 +2423,53 @@
}
#endif /* CONFIG_NFS_V4_1 */
-/*
- * START OF "GENERIC" DECODE ROUTINES.
- * These may look a little ugly since they are imported from a "generic"
- * set of XDR encode/decode routines which are intended to be shared by
- * all of our NFSv4 implementations (OpenBSD, MacOS X...).
- *
- * If the pain of reading these is too great, it should be a straightforward
- * task to translate them into Linux-specific versions which are more
- * consistent with the style used in NFSv2/v3...
- */
-#define READ32(x) (x) = ntohl(*p++)
-#define READ64(x) do { \
- (x) = (u64)ntohl(*p++) << 32; \
- (x) |= ntohl(*p++); \
-} while (0)
-#define READTIME(x) do { \
- p++; \
- (x.tv_sec) = ntohl(*p++); \
- (x.tv_nsec) = ntohl(*p++); \
-} while (0)
-#define COPYMEM(x,nbytes) do { \
- memcpy((x), p, nbytes); \
- p += XDR_QUADLEN(nbytes); \
-} while (0)
-
-#define READ_BUF(nbytes) do { \
- p = xdr_inline_decode(xdr, nbytes); \
- if (unlikely(!p)) { \
- dprintk("nfs: %s: prematurely hit end of receive" \
- " buffer\n", __func__); \
- dprintk("nfs: %s: xdr->p=%p, bytes=%u, xdr->end=%p\n", \
- __func__, xdr->p, nbytes, xdr->end); \
- return -EIO; \
- } \
-} while (0)
+static void print_overflow_msg(const char *func, const struct xdr_stream *xdr)
+{
+ dprintk("nfs: %s: prematurely hit end of receive buffer. "
+ "Remaining buffer length is %tu words.\n",
+ func, xdr->end - xdr->p);
+}
static int decode_opaque_inline(struct xdr_stream *xdr, unsigned int *len, char **string)
{
__be32 *p;
- READ_BUF(4);
- READ32(*len);
- READ_BUF(*len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, *len);
+ if (unlikely(!p))
+ goto out_overflow;
*string = (char *)p;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_compound_hdr(struct xdr_stream *xdr, struct compound_hdr *hdr)
{
__be32 *p;
- READ_BUF(8);
- READ32(hdr->status);
- READ32(hdr->taglen);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ hdr->status = be32_to_cpup(p++);
+ hdr->taglen = be32_to_cpup(p);
- READ_BUF(hdr->taglen + 4);
+ p = xdr_inline_decode(xdr, hdr->taglen + 4);
+ if (unlikely(!p))
+ goto out_overflow;
hdr->tag = (char *)p;
p += XDR_QUADLEN(hdr->taglen);
- READ32(hdr->nops);
+ hdr->nops = be32_to_cpup(p);
if (unlikely(hdr->nops < 1))
return nfs4_stat_to_errno(hdr->status);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
@@ -2536,18 +2478,23 @@
uint32_t opnum;
int32_t nfserr;
- READ_BUF(8);
- READ32(opnum);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ opnum = be32_to_cpup(p++);
if (opnum != expected) {
dprintk("nfs: Server returned operation"
" %d but we issued a request for %d\n",
opnum, expected);
return -EIO;
}
- READ32(nfserr);
+ nfserr = be32_to_cpup(p);
if (nfserr != NFS_OK)
return nfs4_stat_to_errno(nfserr);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
/* Dummy routine */
@@ -2557,8 +2504,11 @@
unsigned int strlen;
char *str;
- READ_BUF(12);
- return decode_opaque_inline(xdr, &strlen, &str);
+ p = xdr_inline_decode(xdr, 12);
+ if (likely(p))
+ return decode_opaque_inline(xdr, &strlen, &str);
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_bitmap(struct xdr_stream *xdr, uint32_t *bitmap)
@@ -2566,27 +2516,39 @@
uint32_t bmlen;
__be32 *p;
- READ_BUF(4);
- READ32(bmlen);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ bmlen = be32_to_cpup(p);
bitmap[0] = bitmap[1] = 0;
- READ_BUF((bmlen << 2));
+ p = xdr_inline_decode(xdr, (bmlen << 2));
+ if (unlikely(!p))
+ goto out_overflow;
if (bmlen > 0) {
- READ32(bitmap[0]);
+ bitmap[0] = be32_to_cpup(p++);
if (bmlen > 1)
- READ32(bitmap[1]);
+ bitmap[1] = be32_to_cpup(p);
}
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static inline int decode_attr_length(struct xdr_stream *xdr, uint32_t *attrlen, __be32 **savep)
{
__be32 *p;
- READ_BUF(4);
- READ32(*attrlen);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *attrlen = be32_to_cpup(p);
*savep = xdr->p;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_supported(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *bitmask)
@@ -2609,8 +2571,10 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_TYPE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_TYPE)) {
- READ_BUF(4);
- READ32(*type);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *type = be32_to_cpup(p);
if (*type < NF4REG || *type > NF4NAMEDATTR) {
dprintk("%s: bad type %d\n", __func__, *type);
return -EIO;
@@ -2620,6 +2584,9 @@
}
dprintk("%s: type=0%o\n", __func__, nfs_type2fmt[*type]);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_change(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *change)
@@ -2631,14 +2598,19 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_CHANGE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_CHANGE)) {
- READ_BUF(8);
- READ64(*change);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, change);
bitmap[0] &= ~FATTR4_WORD0_CHANGE;
ret = NFS_ATTR_FATTR_CHANGE;
}
dprintk("%s: change attribute=%Lu\n", __func__,
(unsigned long long)*change);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_size(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *size)
@@ -2650,13 +2622,18 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_SIZE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_SIZE)) {
- READ_BUF(8);
- READ64(*size);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, size);
bitmap[0] &= ~FATTR4_WORD0_SIZE;
ret = NFS_ATTR_FATTR_SIZE;
}
dprintk("%s: file size=%Lu\n", __func__, (unsigned long long)*size);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_link_support(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2667,12 +2644,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_LINK_SUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_LINK_SUPPORT)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_LINK_SUPPORT;
}
dprintk("%s: link support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_symlink_support(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2683,12 +2665,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_SYMLINK_SUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_SYMLINK_SUPPORT)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_SYMLINK_SUPPORT;
}
dprintk("%s: symlink support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_fsid(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_fsid *fsid)
@@ -2701,9 +2688,11 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FSID - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FSID)) {
- READ_BUF(16);
- READ64(fsid->major);
- READ64(fsid->minor);
+ p = xdr_inline_decode(xdr, 16);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &fsid->major);
+ xdr_decode_hyper(p, &fsid->minor);
bitmap[0] &= ~FATTR4_WORD0_FSID;
ret = NFS_ATTR_FATTR_FSID;
}
@@ -2711,6 +2700,9 @@
(unsigned long long)fsid->major,
(unsigned long long)fsid->minor);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_lease_time(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2721,12 +2713,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_LEASE_TIME - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_LEASE_TIME)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_LEASE_TIME;
}
dprintk("%s: file size=%u\n", __func__, (unsigned int)*res);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_aclsupport(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2737,12 +2734,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_ACLSUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_ACLSUPPORT)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_ACLSUPPORT;
}
dprintk("%s: ACLs supported=%u\n", __func__, (unsigned int)*res);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_fileid(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *fileid)
@@ -2754,13 +2756,18 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILEID - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILEID)) {
- READ_BUF(8);
- READ64(*fileid);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, fileid);
bitmap[0] &= ~FATTR4_WORD0_FILEID;
ret = NFS_ATTR_FATTR_FILEID;
}
dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_mounted_on_fileid(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *fileid)
@@ -2772,13 +2779,18 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_MOUNTED_ON_FILEID - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)) {
- READ_BUF(8);
- READ64(*fileid);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, fileid);
bitmap[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
ret = NFS_ATTR_FATTR_FILEID;
}
dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_files_avail(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -2790,12 +2802,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILES_AVAIL - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILES_AVAIL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_FILES_AVAIL;
}
dprintk("%s: files avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_files_free(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -2807,12 +2824,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILES_FREE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILES_FREE)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_FILES_FREE;
}
dprintk("%s: files free=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_files_total(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -2824,12 +2846,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILES_TOTAL - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILES_TOTAL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_FILES_TOTAL;
}
dprintk("%s: files total=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_pathname(struct xdr_stream *xdr, struct nfs4_pathname *path)
@@ -2838,8 +2865,10 @@
__be32 *p;
int status = 0;
- READ_BUF(4);
- READ32(n);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ n = be32_to_cpup(p);
if (n == 0)
goto root_path;
dprintk("path ");
@@ -2873,6 +2902,9 @@
dprintk(" status %d", status);
status = -EIO;
goto out;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_fs_locations(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs4_fs_locations *res)
@@ -2890,8 +2922,10 @@
status = decode_pathname(xdr, &res->fs_path);
if (unlikely(status != 0))
goto out;
- READ_BUF(4);
- READ32(n);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ n = be32_to_cpup(p);
if (n <= 0)
goto out_eio;
res->nlocations = 0;
@@ -2899,8 +2933,10 @@
u32 m;
struct nfs4_fs_location *loc = &res->locations[res->nlocations];
- READ_BUF(4);
- READ32(m);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ m = be32_to_cpup(p);
loc->nservers = 0;
dprintk("%s: servers ", __func__);
@@ -2939,6 +2975,8 @@
out:
dprintk("%s: fs_locations done, error = %d\n", __func__, status);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
out_eio:
status = -EIO;
goto out;
@@ -2953,12 +2991,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_MAXFILESIZE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXFILESIZE)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_MAXFILESIZE;
}
dprintk("%s: maxfilesize=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxlink(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *maxlink)
@@ -2970,12 +3013,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_MAXLINK - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXLINK)) {
- READ_BUF(4);
- READ32(*maxlink);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *maxlink = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_MAXLINK;
}
dprintk("%s: maxlink=%u\n", __func__, *maxlink);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxname(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *maxname)
@@ -2987,12 +3035,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_MAXNAME - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXNAME)) {
- READ_BUF(4);
- READ32(*maxname);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *maxname = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_MAXNAME;
}
dprintk("%s: maxname=%u\n", __func__, *maxname);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxread(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -3005,8 +3058,10 @@
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXREAD)) {
uint64_t maxread;
- READ_BUF(8);
- READ64(maxread);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, &maxread);
if (maxread > 0x7FFFFFFF)
maxread = 0x7FFFFFFF;
*res = (uint32_t)maxread;
@@ -3014,6 +3069,9 @@
}
dprintk("%s: maxread=%lu\n", __func__, (unsigned long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxwrite(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -3026,8 +3084,10 @@
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXWRITE)) {
uint64_t maxwrite;
- READ_BUF(8);
- READ64(maxwrite);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, &maxwrite);
if (maxwrite > 0x7FFFFFFF)
maxwrite = 0x7FFFFFFF;
*res = (uint32_t)maxwrite;
@@ -3035,6 +3095,9 @@
}
dprintk("%s: maxwrite=%lu\n", __func__, (unsigned long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_mode(struct xdr_stream *xdr, uint32_t *bitmap, umode_t *mode)
@@ -3047,14 +3110,19 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_MODE - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_MODE)) {
- READ_BUF(4);
- READ32(tmp);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ tmp = be32_to_cpup(p);
*mode = tmp & ~S_IFMT;
bitmap[1] &= ~FATTR4_WORD1_MODE;
ret = NFS_ATTR_FATTR_MODE;
}
dprintk("%s: file mode=0%o\n", __func__, (unsigned int)*mode);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_nlink(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *nlink)
@@ -3066,16 +3134,22 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_NUMLINKS - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_NUMLINKS)) {
- READ_BUF(4);
- READ32(*nlink);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *nlink = be32_to_cpup(p);
bitmap[1] &= ~FATTR4_WORD1_NUMLINKS;
ret = NFS_ATTR_FATTR_NLINK;
}
dprintk("%s: nlink=%u\n", __func__, (unsigned int)*nlink);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
-static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, uint32_t *uid)
+static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap,
+ struct nfs_client *clp, uint32_t *uid, int may_sleep)
{
uint32_t len;
__be32 *p;
@@ -3085,10 +3159,16 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_OWNER - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_OWNER)) {
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
- if (len < XDR_MAX_NETOBJ) {
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
+ if (!may_sleep) {
+ /* do nothing */
+ } else if (len < XDR_MAX_NETOBJ) {
if (nfs_map_name_to_uid(clp, (char *)p, len, uid) == 0)
ret = NFS_ATTR_FATTR_OWNER;
else
@@ -3101,9 +3181,13 @@
}
dprintk("%s: uid=%d\n", __func__, (int)*uid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
-static int decode_attr_group(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, uint32_t *gid)
+static int decode_attr_group(struct xdr_stream *xdr, uint32_t *bitmap,
+ struct nfs_client *clp, uint32_t *gid, int may_sleep)
{
uint32_t len;
__be32 *p;
@@ -3113,10 +3197,16 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_OWNER_GROUP - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_OWNER_GROUP)) {
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
- if (len < XDR_MAX_NETOBJ) {
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
+ if (!may_sleep) {
+ /* do nothing */
+ } else if (len < XDR_MAX_NETOBJ) {
if (nfs_map_group_to_gid(clp, (char *)p, len, gid) == 0)
ret = NFS_ATTR_FATTR_GROUP;
else
@@ -3129,6 +3219,9 @@
}
dprintk("%s: gid=%d\n", __func__, (int)*gid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_rdev(struct xdr_stream *xdr, uint32_t *bitmap, dev_t *rdev)
@@ -3143,9 +3236,11 @@
if (likely(bitmap[1] & FATTR4_WORD1_RAWDEV)) {
dev_t tmp;
- READ_BUF(8);
- READ32(major);
- READ32(minor);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ major = be32_to_cpup(p++);
+ minor = be32_to_cpup(p);
tmp = MKDEV(major, minor);
if (MAJOR(tmp) == major && MINOR(tmp) == minor)
*rdev = tmp;
@@ -3154,6 +3249,9 @@
}
dprintk("%s: rdev=(0x%x:0x%x)\n", __func__, major, minor);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_avail(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -3165,12 +3263,17 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_AVAIL - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_AVAIL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_AVAIL;
}
dprintk("%s: space avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_free(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -3182,12 +3285,17 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_FREE - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_FREE)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_FREE;
}
dprintk("%s: space free=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_total(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -3199,12 +3307,17 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_TOTAL - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_TOTAL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_TOTAL;
}
dprintk("%s: space total=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_used(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *used)
@@ -3216,14 +3329,19 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_USED - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_USED)) {
- READ_BUF(8);
- READ64(*used);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, used);
bitmap[1] &= ~FATTR4_WORD1_SPACE_USED;
ret = NFS_ATTR_FATTR_SPACE_USED;
}
dprintk("%s: space used=%Lu\n", __func__,
(unsigned long long)*used);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_time(struct xdr_stream *xdr, struct timespec *time)
@@ -3232,12 +3350,17 @@
uint64_t sec;
uint32_t nsec;
- READ_BUF(12);
- READ64(sec);
- READ32(nsec);
+ p = xdr_inline_decode(xdr, 12);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &sec);
+ nsec = be32_to_cpup(p);
time->tv_sec = (time_t)sec;
time->tv_nsec = (long)nsec;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_time_access(struct xdr_stream *xdr, uint32_t *bitmap, struct timespec *time)
@@ -3315,11 +3438,16 @@
{
__be32 *p;
- READ_BUF(20);
- READ32(cinfo->atomic);
- READ64(cinfo->before);
- READ64(cinfo->after);
+ p = xdr_inline_decode(xdr, 20);
+ if (unlikely(!p))
+ goto out_overflow;
+ cinfo->atomic = be32_to_cpup(p++);
+ p = xdr_decode_hyper(p, &cinfo->before);
+ xdr_decode_hyper(p, &cinfo->after);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_access(struct xdr_stream *xdr, struct nfs4_accessres *access)
@@ -3331,40 +3459,62 @@
status = decode_op_hdr(xdr, OP_ACCESS);
if (status)
return status;
- READ_BUF(8);
- READ32(supp);
- READ32(acc);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ supp = be32_to_cpup(p++);
+ acc = be32_to_cpup(p);
access->supported = supp;
access->access = acc;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
+}
+
+static int decode_opaque_fixed(struct xdr_stream *xdr, void *buf, size_t len)
+{
+ __be32 *p;
+
+ p = xdr_inline_decode(xdr, len);
+ if (likely(p)) {
+ memcpy(buf, p, len);
+ return 0;
+ }
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
+}
+
+static int decode_stateid(struct xdr_stream *xdr, nfs4_stateid *stateid)
+{
+ return decode_opaque_fixed(xdr, stateid->data, NFS4_STATEID_SIZE);
}
static int decode_close(struct xdr_stream *xdr, struct nfs_closeres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_CLOSE);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
- return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- return 0;
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ return status;
+}
+
+static int decode_verifier(struct xdr_stream *xdr, void *verifier)
+{
+ return decode_opaque_fixed(xdr, verifier, 8);
}
static int decode_commit(struct xdr_stream *xdr, struct nfs_writeres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_COMMIT);
- if (status)
- return status;
- READ_BUF(8);
- COPYMEM(res->verf->verifier, 8);
- return 0;
+ if (!status)
+ status = decode_verifier(xdr, res->verf->verifier);
+ return status;
}
static int decode_create(struct xdr_stream *xdr, struct nfs4_change_info *cinfo)
@@ -3378,10 +3528,16 @@
return status;
if ((status = decode_change_info(xdr, cinfo)))
return status;
- READ_BUF(4);
- READ32(bmlen);
- READ_BUF(bmlen << 2);
- return 0;
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ bmlen = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, bmlen << 2);
+ if (likely(p))
+ return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_server_caps(struct xdr_stream *xdr, struct nfs4_server_caps_res *res)
@@ -3466,7 +3622,8 @@
return status;
}
-static int decode_getfattr(struct xdr_stream *xdr, struct nfs_fattr *fattr, const struct nfs_server *server)
+static int decode_getfattr(struct xdr_stream *xdr, struct nfs_fattr *fattr,
+ const struct nfs_server *server, int may_sleep)
{
__be32 *savep;
uint32_t attrlen,
@@ -3538,12 +3695,14 @@
goto xdr_error;
fattr->valid |= status;
- status = decode_attr_owner(xdr, bitmap, server->nfs_client, &fattr->uid);
+ status = decode_attr_owner(xdr, bitmap, server->nfs_client,
+ &fattr->uid, may_sleep);
if (status < 0)
goto xdr_error;
fattr->valid |= status;
- status = decode_attr_group(xdr, bitmap, server->nfs_client, &fattr->gid);
+ status = decode_attr_group(xdr, bitmap, server->nfs_client,
+ &fattr->gid, may_sleep);
if (status < 0)
goto xdr_error;
fattr->valid |= status;
@@ -3633,14 +3792,21 @@
if (status)
return status;
- READ_BUF(4);
- READ32(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
if (len > NFS4_FHSIZE)
return -EIO;
fh->size = len;
- READ_BUF(len);
- COPYMEM(fh->data, len);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
+ memcpy(fh->data, p, len);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_link(struct xdr_stream *xdr, struct nfs4_change_info *cinfo)
@@ -3662,10 +3828,12 @@
__be32 *p;
uint32_t namelen, type;
- READ_BUF(32);
- READ64(offset);
- READ64(length);
- READ32(type);
+ p = xdr_inline_decode(xdr, 32);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &offset);
+ p = xdr_decode_hyper(p, &length);
+ type = be32_to_cpup(p++);
if (fl != NULL) {
fl->fl_start = (loff_t)offset;
fl->fl_end = fl->fl_start + (loff_t)length - 1;
@@ -3676,23 +3844,27 @@
fl->fl_type = F_RDLCK;
fl->fl_pid = 0;
}
- READ64(clientid);
- READ32(namelen);
- READ_BUF(namelen);
- return -NFS4ERR_DENIED;
+ p = xdr_decode_hyper(p, &clientid);
+ namelen = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, namelen);
+ if (likely(p))
+ return -NFS4ERR_DENIED;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_lock(struct xdr_stream *xdr, struct nfs_lock_res *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_LOCK);
if (status == -EIO)
goto out;
if (status == 0) {
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
+ status = decode_stateid(xdr, &res->stateid);
+ if (unlikely(status))
+ goto out;
} else if (status == -NFS4ERR_DENIED)
status = decode_lock_denied(xdr, NULL);
if (res->open_seqid != NULL)
@@ -3713,16 +3885,13 @@
static int decode_locku(struct xdr_stream *xdr, struct nfs_locku_res *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_LOCKU);
if (status != -EIO)
nfs_increment_lock_seqid(status, res->seqid);
- if (status == 0) {
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- }
+ if (status == 0)
+ status = decode_stateid(xdr, &res->stateid);
return status;
}
@@ -3737,34 +3906,46 @@
__be32 *p;
uint32_t limit_type, nblocks, blocksize;
- READ_BUF(12);
- READ32(limit_type);
+ p = xdr_inline_decode(xdr, 12);
+ if (unlikely(!p))
+ goto out_overflow;
+ limit_type = be32_to_cpup(p++);
switch (limit_type) {
case 1:
- READ64(*maxsize);
+ xdr_decode_hyper(p, maxsize);
break;
case 2:
- READ32(nblocks);
- READ32(blocksize);
+ nblocks = be32_to_cpup(p++);
+ blocksize = be32_to_cpup(p);
*maxsize = (uint64_t)nblocks * (uint64_t)blocksize;
}
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_delegation(struct xdr_stream *xdr, struct nfs_openres *res)
{
__be32 *p;
uint32_t delegation_type;
+ int status;
- READ_BUF(4);
- READ32(delegation_type);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ delegation_type = be32_to_cpup(p);
if (delegation_type == NFS4_OPEN_DELEGATE_NONE) {
res->delegation_type = 0;
return 0;
}
- READ_BUF(NFS4_STATEID_SIZE+4);
- COPYMEM(res->delegation.data, NFS4_STATEID_SIZE);
- READ32(res->do_recall);
+ status = decode_stateid(xdr, &res->delegation);
+ if (unlikely(status))
+ return status;
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ res->do_recall = be32_to_cpup(p);
switch (delegation_type) {
case NFS4_OPEN_DELEGATE_READ:
@@ -3776,6 +3957,9 @@
return -EIO;
}
return decode_ace(xdr, NULL, res->server->nfs_client);
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_open(struct xdr_stream *xdr, struct nfs_openres *res)
@@ -3787,23 +3971,27 @@
status = decode_op_hdr(xdr, OP_OPEN);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ if (unlikely(status))
return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
decode_change_info(xdr, &res->cinfo);
- READ_BUF(8);
- READ32(res->rflags);
- READ32(bmlen);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ res->rflags = be32_to_cpup(p++);
+ bmlen = be32_to_cpup(p);
if (bmlen > 10)
goto xdr_error;
- READ_BUF(bmlen << 2);
+ p = xdr_inline_decode(xdr, bmlen << 2);
+ if (unlikely(!p))
+ goto out_overflow;
savewords = min_t(uint32_t, bmlen, NFS4_BITMAP_SIZE);
for (i = 0; i < savewords; ++i)
- READ32(res->attrset[i]);
+ res->attrset[i] = be32_to_cpup(p++);
for (; i < NFS4_BITMAP_SIZE; i++)
res->attrset[i] = 0;
@@ -3811,36 +3999,33 @@
xdr_error:
dprintk("%s: Bitmap too large! Length = %u\n", __func__, bmlen);
return -EIO;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_open_confirm(struct xdr_stream *xdr, struct nfs_open_confirmres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_OPEN_CONFIRM);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
- return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- return 0;
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ return status;
}
static int decode_open_downgrade(struct xdr_stream *xdr, struct nfs_closeres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_OPEN_DOWNGRADE);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
- return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- return 0;
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ return status;
}
static int decode_putfh(struct xdr_stream *xdr)
@@ -3863,9 +4048,11 @@
status = decode_op_hdr(xdr, OP_READ);
if (status)
return status;
- READ_BUF(8);
- READ32(eof);
- READ32(count);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ eof = be32_to_cpup(p++);
+ count = be32_to_cpup(p);
hdrlen = (u8 *) p - (u8 *) iov->iov_base;
recvd = req->rq_rcv_buf.len - hdrlen;
if (count > recvd) {
@@ -3878,6 +4065,9 @@
res->eof = eof;
res->count = count;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct nfs4_readdir_res *readdir)
@@ -3892,17 +4082,17 @@
int status;
status = decode_op_hdr(xdr, OP_READDIR);
- if (status)
+ if (!status)
+ status = decode_verifier(xdr, readdir->verifier.data);
+ if (unlikely(status))
return status;
- READ_BUF(8);
- COPYMEM(readdir->verifier.data, 8);
dprintk("%s: verifier = %08x:%08x\n",
__func__,
((u32 *)readdir->verifier.data)[0],
((u32 *)readdir->verifier.data)[1]);
- hdrlen = (char *) p - (char *) iov->iov_base;
+ hdrlen = (char *) xdr->p - (char *) iov->iov_base;
recvd = rcvbuf->len - hdrlen;
if (pglen > recvd)
pglen = recvd;
@@ -3990,8 +4180,10 @@
return status;
/* Convert length of symlink */
- READ_BUF(4);
- READ32(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
if (len >= rcvbuf->page_len || len <= 0) {
dprintk("nfs: server returned giant symlink!\n");
return -ENAMETOOLONG;
@@ -4015,6 +4207,9 @@
kaddr[len+rcvbuf->page_base] = '\0';
kunmap_atomic(kaddr, KM_USER0);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_remove(struct xdr_stream *xdr, struct nfs4_change_info *cinfo)
@@ -4112,10 +4307,16 @@
status = decode_op_hdr(xdr, OP_SETATTR);
if (status)
return status;
- READ_BUF(4);
- READ32(bmlen);
- READ_BUF(bmlen << 2);
- return 0;
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ bmlen = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, bmlen << 2);
+ if (likely(p))
+ return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_setclientid(struct xdr_stream *xdr, struct nfs_client *clp)
@@ -4124,35 +4325,50 @@
uint32_t opnum;
int32_t nfserr;
- READ_BUF(8);
- READ32(opnum);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ opnum = be32_to_cpup(p++);
if (opnum != OP_SETCLIENTID) {
dprintk("nfs: decode_setclientid: Server returned operation"
" %d\n", opnum);
return -EIO;
}
- READ32(nfserr);
+ nfserr = be32_to_cpup(p);
if (nfserr == NFS_OK) {
- READ_BUF(8 + NFS4_VERIFIER_SIZE);
- READ64(clp->cl_clientid);
- COPYMEM(clp->cl_confirm.data, NFS4_VERIFIER_SIZE);
+ p = xdr_inline_decode(xdr, 8 + NFS4_VERIFIER_SIZE);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &clp->cl_clientid);
+ memcpy(clp->cl_confirm.data, p, NFS4_VERIFIER_SIZE);
} else if (nfserr == NFSERR_CLID_INUSE) {
uint32_t len;
/* skip netid string */
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
/* skip uaddr string */
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
return -NFSERR_CLID_INUSE;
} else
return nfs4_stat_to_errno(nfserr);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_setclientid_confirm(struct xdr_stream *xdr)
@@ -4169,11 +4385,16 @@
if (status)
return status;
- READ_BUF(16);
- READ32(res->count);
- READ32(res->verf->committed);
- COPYMEM(res->verf->verifier, 8);
+ p = xdr_inline_decode(xdr, 16);
+ if (unlikely(!p))
+ goto out_overflow;
+ res->count = be32_to_cpup(p++);
+ res->verf->committed = be32_to_cpup(p++);
+ memcpy(res->verf->verifier, p, 8);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_delegreturn(struct xdr_stream *xdr)
@@ -4187,6 +4408,7 @@
{
__be32 *p;
uint32_t dummy;
+ char *dummy_str;
int status;
struct nfs_client *clp = res->client;
@@ -4194,36 +4416,45 @@
if (status)
return status;
- READ_BUF(8);
- READ64(clp->cl_ex_clid);
- READ_BUF(12);
- READ32(clp->cl_seqid);
- READ32(clp->cl_exchange_flags);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, &clp->cl_ex_clid);
+ p = xdr_inline_decode(xdr, 12);
+ if (unlikely(!p))
+ goto out_overflow;
+ clp->cl_seqid = be32_to_cpup(p++);
+ clp->cl_exchange_flags = be32_to_cpup(p++);
/* We ask for SP4_NONE */
- READ32(dummy);
+ dummy = be32_to_cpup(p);
if (dummy != SP4_NONE)
return -EIO;
/* Throw away minor_id */
- READ_BUF(8);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
/* Throw away Major id */
- READ_BUF(4);
- READ32(dummy);
- READ_BUF(dummy);
+ status = decode_opaque_inline(xdr, &dummy, &dummy_str);
+ if (unlikely(status))
+ return status;
/* Throw away server_scope */
- READ_BUF(4);
- READ32(dummy);
- READ_BUF(dummy);
+ status = decode_opaque_inline(xdr, &dummy, &dummy_str);
+ if (unlikely(status))
+ return status;
/* Throw away Implementation id array */
- READ_BUF(4);
- READ32(dummy);
- READ_BUF(dummy);
+ status = decode_opaque_inline(xdr, &dummy, &dummy_str);
+ if (unlikely(status))
+ return status;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_chan_attrs(struct xdr_stream *xdr,
@@ -4232,22 +4463,35 @@
__be32 *p;
u32 nr_attrs;
- READ_BUF(28);
- READ32(attrs->headerpadsz);
- READ32(attrs->max_rqst_sz);
- READ32(attrs->max_resp_sz);
- READ32(attrs->max_resp_sz_cached);
- READ32(attrs->max_ops);
- READ32(attrs->max_reqs);
- READ32(nr_attrs);
+ p = xdr_inline_decode(xdr, 28);
+ if (unlikely(!p))
+ goto out_overflow;
+ attrs->headerpadsz = be32_to_cpup(p++);
+ attrs->max_rqst_sz = be32_to_cpup(p++);
+ attrs->max_resp_sz = be32_to_cpup(p++);
+ attrs->max_resp_sz_cached = be32_to_cpup(p++);
+ attrs->max_ops = be32_to_cpup(p++);
+ attrs->max_reqs = be32_to_cpup(p++);
+ nr_attrs = be32_to_cpup(p);
if (unlikely(nr_attrs > 1)) {
printk(KERN_WARNING "%s: Invalid rdma channel attrs count %u\n",
__func__, nr_attrs);
return -EINVAL;
}
- if (nr_attrs == 1)
- READ_BUF(4); /* skip rdma_attrs */
+ if (nr_attrs == 1) {
+ p = xdr_inline_decode(xdr, 4); /* skip rdma_attrs */
+ if (unlikely(!p))
+ goto out_overflow;
+ }
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
+}
+
+static int decode_sessionid(struct xdr_stream *xdr, struct nfs4_sessionid *sid)
+{
+ return decode_opaque_fixed(xdr, sid->data, NFS4_MAX_SESSIONID_LEN);
}
static int decode_create_session(struct xdr_stream *xdr,
@@ -4259,24 +4503,26 @@
struct nfs4_session *session = clp->cl_session;
status = decode_op_hdr(xdr, OP_CREATE_SESSION);
-
- if (status)
+ if (!status)
+ status = decode_sessionid(xdr, &session->sess_id);
+ if (unlikely(status))
return status;
- /* sessionid */
- READ_BUF(NFS4_MAX_SESSIONID_LEN);
- COPYMEM(&session->sess_id, NFS4_MAX_SESSIONID_LEN);
-
/* seqid, flags */
- READ_BUF(8);
- READ32(clp->cl_seqid);
- READ32(session->flags);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ clp->cl_seqid = be32_to_cpup(p++);
+ session->flags = be32_to_cpup(p);
/* Channel attributes */
status = decode_chan_attrs(xdr, &session->fc_attrs);
if (!status)
status = decode_chan_attrs(xdr, &session->bc_attrs);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_destroy_session(struct xdr_stream *xdr, void *dummy)
@@ -4300,7 +4546,9 @@
return 0;
status = decode_op_hdr(xdr, OP_SEQUENCE);
- if (status)
+ if (!status)
+ status = decode_sessionid(xdr, &id);
+ if (unlikely(status))
goto out_err;
/*
@@ -4309,36 +4557,43 @@
*/
status = -ESERVERFAULT;
- slot = &res->sr_session->fc_slot_table.slots[res->sr_slotid];
- READ_BUF(NFS4_MAX_SESSIONID_LEN + 20);
- COPYMEM(id.data, NFS4_MAX_SESSIONID_LEN);
if (memcmp(id.data, res->sr_session->sess_id.data,
NFS4_MAX_SESSIONID_LEN)) {
dprintk("%s Invalid session id\n", __func__);
goto out_err;
}
+
+ p = xdr_inline_decode(xdr, 20);
+ if (unlikely(!p))
+ goto out_overflow;
+
/* seqid */
- READ32(dummy);
+ slot = &res->sr_session->fc_slot_table.slots[res->sr_slotid];
+ dummy = be32_to_cpup(p++);
if (dummy != slot->seq_nr) {
dprintk("%s Invalid sequence number\n", __func__);
goto out_err;
}
/* slot id */
- READ32(dummy);
+ dummy = be32_to_cpup(p++);
if (dummy != res->sr_slotid) {
dprintk("%s Invalid slot id\n", __func__);
goto out_err;
}
/* highest slot id - currently not processed */
- READ32(dummy);
+ dummy = be32_to_cpup(p++);
/* target highest slot id - currently not processed */
- READ32(dummy);
+ dummy = be32_to_cpup(p++);
/* result flags - currently not processed */
- READ32(dummy);
+ dummy = be32_to_cpup(p);
status = 0;
out_err:
res->sr_status = status;
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ status = -EIO;
+ goto out_err;
#else /* CONFIG_NFS_V4_1 */
return 0;
#endif /* CONFIG_NFS_V4_1 */
@@ -4370,7 +4625,8 @@
status = decode_open_downgrade(&xdr, res);
if (status != 0)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4397,7 +4653,8 @@
status = decode_access(&xdr, res);
if (status != 0)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4424,7 +4681,8 @@
goto out;
if ((status = decode_getfh(&xdr, res->fh)) != 0)
goto out;
- status = decode_getfattr(&xdr, res->fattr, res->server);
+ status = decode_getfattr(&xdr, res->fattr, res->server
+ ,!RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4448,7 +4706,8 @@
if ((status = decode_putrootfh(&xdr)) != 0)
goto out;
if ((status = decode_getfh(&xdr, res->fh)) == 0)
- status = decode_getfattr(&xdr, res->fattr, res->server);
+ status = decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4473,7 +4732,8 @@
goto out;
if ((status = decode_remove(&xdr, &res->cinfo)) != 0)
goto out;
- decode_getfattr(&xdr, &res->dir_attr, res->server);
+ decode_getfattr(&xdr, &res->dir_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4503,11 +4763,13 @@
if ((status = decode_rename(&xdr, &res->old_cinfo, &res->new_cinfo)) != 0)
goto out;
/* Current FH is target directory */
- if (decode_getfattr(&xdr, res->new_fattr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->new_fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if ((status = decode_restorefh(&xdr)) != 0)
goto out;
- decode_getfattr(&xdr, res->old_fattr, res->server);
+ decode_getfattr(&xdr, res->old_fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4540,11 +4802,13 @@
* Note order: OP_LINK leaves the directory as the current
* filehandle.
*/
- if (decode_getfattr(&xdr, res->dir_attr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->dir_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if ((status = decode_restorefh(&xdr)) != 0)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4573,11 +4837,13 @@
goto out;
if ((status = decode_getfh(&xdr, res->fh)) != 0)
goto out;
- if (decode_getfattr(&xdr, res->fattr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if ((status = decode_restorefh(&xdr)) != 0)
goto out;
- decode_getfattr(&xdr, res->dir_fattr, res->server);
+ decode_getfattr(&xdr, res->dir_fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4609,7 +4875,8 @@
status = decode_putfh(&xdr);
if (status)
goto out;
- status = decode_getfattr(&xdr, res->fattr, res->server);
+ status = decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4716,7 +4983,8 @@
* an ESTALE error. Shouldn't be a problem,
* though, since fattr->valid will remain unset.
*/
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4748,11 +5016,13 @@
goto out;
if (decode_getfh(&xdr, &res->fh) != 0)
goto out;
- if (decode_getfattr(&xdr, res->f_attr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->f_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if (decode_restorefh(&xdr) != 0)
goto out;
- decode_getfattr(&xdr, res->dir_attr, res->server);
+ decode_getfattr(&xdr, res->dir_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4800,7 +5070,8 @@
status = decode_open(&xdr, res);
if (status)
goto out;
- decode_getfattr(&xdr, res->f_attr, res->server);
+ decode_getfattr(&xdr, res->f_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4827,7 +5098,8 @@
status = decode_setattr(&xdr);
if (status)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -5001,7 +5273,8 @@
status = decode_write(&xdr, res);
if (status)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
if (!status)
status = res->count;
out:
@@ -5030,7 +5303,8 @@
status = decode_commit(&xdr, res);
if (status)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -5194,7 +5468,8 @@
if (status != 0)
goto out;
status = decode_delegreturn(&xdr);
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -5222,7 +5497,8 @@
goto out;
xdr_enter_page(&xdr, PAGE_SIZE);
status = decode_getfattr(&xdr, &res->fs_locations->fattr,
- res->fs_locations->server);
+ res->fs_locations->server,
+ !RPC_IS_ASYNC(req->rq_task));
out:
return status;
}
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 0b4cbdc..867f705 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -73,7 +73,7 @@
Opt_cto, Opt_nocto,
Opt_ac, Opt_noac,
Opt_lock, Opt_nolock,
- Opt_v2, Opt_v3,
+ Opt_v2, Opt_v3, Opt_v4,
Opt_udp, Opt_tcp, Opt_rdma,
Opt_acl, Opt_noacl,
Opt_rdirplus, Opt_nordirplus,
@@ -127,6 +127,7 @@
{ Opt_nolock, "nolock" },
{ Opt_v2, "v2" },
{ Opt_v3, "v3" },
+ { Opt_v4, "v4" },
{ Opt_udp, "udp" },
{ Opt_tcp, "tcp" },
{ Opt_rdma, "rdma" },
@@ -158,7 +159,7 @@
{ Opt_mountvers, "mountvers=%s" },
{ Opt_nfsvers, "nfsvers=%s" },
{ Opt_nfsvers, "vers=%s" },
- { Opt_minorversion, "minorversion=%u" },
+ { Opt_minorversion, "minorversion=%s" },
{ Opt_sec, "sec=%s" },
{ Opt_proto, "proto=%s" },
@@ -272,6 +273,10 @@
};
#ifdef CONFIG_NFS_V4
+static int nfs4_validate_text_mount_data(void *options,
+ struct nfs_parsed_mount_data *args, const char *dev_name);
+static int nfs4_try_mount(int flags, const char *dev_name,
+ struct nfs_parsed_mount_data *data, struct vfsmount *mnt);
static int nfs4_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
static int nfs4_remote_get_sb(struct file_system_type *fs_type,
@@ -742,127 +747,23 @@
}
}
+ dfprintk(MOUNT, "NFS: Invalid IP address specified\n");
return 0;
}
-static void nfs_parse_ipv4_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- struct sockaddr_in *sin = (struct sockaddr_in *)sap;
- u8 *addr = (u8 *)&sin->sin_addr.s_addr;
-
- if (str_len <= INET_ADDRSTRLEN) {
- dfprintk(MOUNT, "NFS: parsing IPv4 address %*s\n",
- (int)str_len, string);
-
- sin->sin_family = AF_INET;
- *addr_len = sizeof(*sin);
- if (in4_pton(string, str_len, addr, '\0', NULL))
- return;
- }
-
- sap->sa_family = AF_UNSPEC;
- *addr_len = 0;
-}
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-static int nfs_parse_ipv6_scope_id(const char *string, const size_t str_len,
- const char *delim,
- struct sockaddr_in6 *sin6)
-{
- char *p;
- size_t len;
-
- if ((string + str_len) == delim)
- return 1;
-
- if (*delim != IPV6_SCOPE_DELIMITER)
- return 0;
-
- if (!(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL))
- return 0;
-
- len = (string + str_len) - delim - 1;
- p = kstrndup(delim + 1, len, GFP_KERNEL);
- if (p) {
- unsigned long scope_id = 0;
- struct net_device *dev;
-
- dev = dev_get_by_name(&init_net, p);
- if (dev != NULL) {
- scope_id = dev->ifindex;
- dev_put(dev);
- } else {
- if (strict_strtoul(p, 10, &scope_id) == 0) {
- kfree(p);
- return 0;
- }
- }
-
- kfree(p);
-
- sin6->sin6_scope_id = scope_id;
- dfprintk(MOUNT, "NFS: IPv6 scope ID = %lu\n", scope_id);
- return 1;
- }
-
- return 0;
-}
-
-static void nfs_parse_ipv6_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
- u8 *addr = (u8 *)&sin6->sin6_addr.in6_u;
- const char *delim;
-
- if (str_len <= INET6_ADDRSTRLEN) {
- dfprintk(MOUNT, "NFS: parsing IPv6 address %*s\n",
- (int)str_len, string);
-
- sin6->sin6_family = AF_INET6;
- *addr_len = sizeof(*sin6);
- if (in6_pton(string, str_len, addr,
- IPV6_SCOPE_DELIMITER, &delim) != 0) {
- if (nfs_parse_ipv6_scope_id(string, str_len,
- delim, sin6) != 0)
- return;
- }
- }
-
- sap->sa_family = AF_UNSPEC;
- *addr_len = 0;
-}
-#else
-static void nfs_parse_ipv6_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- sap->sa_family = AF_UNSPEC;
- *addr_len = 0;
-}
-#endif
-
/*
- * Construct a sockaddr based on the contents of a string that contains
- * an IP address in presentation format.
- *
- * If there is a problem constructing the new sockaddr, set the address
- * family to AF_UNSPEC.
+ * Select between a default port value and a user-specified port value.
+ * If a zero value is set, then autobind will be used.
*/
-void nfs_parse_ip_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
+static void nfs_set_default_port(struct sockaddr *sap, const int parsed_port,
+ const unsigned short default_port)
{
- unsigned int i, colons;
+ unsigned short port = default_port;
- colons = 0;
- for (i = 0; i < str_len; i++)
- if (string[i] == ':')
- colons++;
+ if (parsed_port != NFS_UNSPEC_PORT)
+ port = parsed_port;
- if (colons >= 2)
- nfs_parse_ipv6_address(string, str_len, sap, addr_len);
- else
- nfs_parse_ipv4_address(string, str_len, sap, addr_len);
+ rpc_set_port(sap, port);
}
/*
@@ -904,8 +805,6 @@
/*
* Parse the value of the 'sec=' option.
- *
- * The flavor_len setting is for v4 mounts.
*/
static int nfs_parse_security_flavors(char *value,
struct nfs_parsed_mount_data *mnt)
@@ -916,53 +815,43 @@
switch (match_token(value, nfs_secflavor_tokens, args)) {
case Opt_sec_none:
- mnt->auth_flavor_len = 0;
mnt->auth_flavors[0] = RPC_AUTH_NULL;
break;
case Opt_sec_sys:
- mnt->auth_flavor_len = 0;
mnt->auth_flavors[0] = RPC_AUTH_UNIX;
break;
case Opt_sec_krb5:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_KRB5;
break;
case Opt_sec_krb5i:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_KRB5I;
break;
case Opt_sec_krb5p:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_KRB5P;
break;
case Opt_sec_lkey:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_LKEY;
break;
case Opt_sec_lkeyi:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_LKEYI;
break;
case Opt_sec_lkeyp:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_LKEYP;
break;
case Opt_sec_spkm:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_SPKM;
break;
case Opt_sec_spkmi:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_SPKMI;
break;
case Opt_sec_spkmp:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_SPKMP;
break;
default:
return 0;
}
+ mnt->auth_flavor_len = 1;
return 1;
}
@@ -1001,7 +890,6 @@
while ((p = strsep(&raw, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
unsigned long option;
- int int_option;
int token;
if (!*p)
@@ -1047,10 +935,18 @@
break;
case Opt_v2:
mnt->flags &= ~NFS_MOUNT_VER3;
+ mnt->version = 2;
break;
case Opt_v3:
mnt->flags |= NFS_MOUNT_VER3;
+ mnt->version = 3;
break;
+#ifdef CONFIG_NFS_V4
+ case Opt_v4:
+ mnt->flags &= ~NFS_MOUNT_VER3;
+ mnt->version = 4;
+ break;
+#endif
case Opt_udp:
mnt->flags &= ~NFS_MOUNT_TCP;
mnt->nfs_server.protocol = XPRT_TRANSPORT_UDP;
@@ -1264,20 +1160,33 @@
switch (option) {
case NFS2_VERSION:
mnt->flags &= ~NFS_MOUNT_VER3;
+ mnt->version = 2;
break;
case NFS3_VERSION:
mnt->flags |= NFS_MOUNT_VER3;
+ mnt->version = 3;
break;
+#ifdef CONFIG_NFS_V4
+ case NFS4_VERSION:
+ mnt->flags &= ~NFS_MOUNT_VER3;
+ mnt->version = 4;
+ break;
+#endif
default:
goto out_invalid_value;
}
break;
case Opt_minorversion:
- if (match_int(args, &int_option))
- return 0;
- if (int_option < 0 || int_option > NFS4_MAX_MINOR_VERSION)
- return 0;
- mnt->minorversion = int_option;
+ string = match_strdup(args);
+ if (string == NULL)
+ goto out_nomem;
+ rc = strict_strtoul(string, 10, &option);
+ kfree(string);
+ if (rc != 0)
+ goto out_invalid_value;
+ if (option > NFS4_MAX_MINOR_VERSION)
+ goto out_invalid_value;
+ mnt->minorversion = option;
break;
/*
@@ -1352,11 +1261,14 @@
string = match_strdup(args);
if (string == NULL)
goto out_nomem;
- nfs_parse_ip_address(string, strlen(string),
- (struct sockaddr *)
- &mnt->nfs_server.address,
- &mnt->nfs_server.addrlen);
+ mnt->nfs_server.addrlen =
+ rpc_pton(string, strlen(string),
+ (struct sockaddr *)
+ &mnt->nfs_server.address,
+ sizeof(mnt->nfs_server.address));
kfree(string);
+ if (mnt->nfs_server.addrlen == 0)
+ goto out_invalid_address;
break;
case Opt_clientaddr:
string = match_strdup(args);
@@ -1376,11 +1288,14 @@
string = match_strdup(args);
if (string == NULL)
goto out_nomem;
- nfs_parse_ip_address(string, strlen(string),
- (struct sockaddr *)
- &mnt->mount_server.address,
- &mnt->mount_server.addrlen);
+ mnt->mount_server.addrlen =
+ rpc_pton(string, strlen(string),
+ (struct sockaddr *)
+ &mnt->mount_server.address,
+ sizeof(mnt->mount_server.address));
kfree(string);
+ if (mnt->mount_server.addrlen == 0)
+ goto out_invalid_address;
break;
case Opt_lookupcache:
string = match_strdup(args);
@@ -1432,8 +1347,11 @@
return 1;
+out_invalid_address:
+ printk(KERN_INFO "NFS: bad IP address specified: %s\n", p);
+ return 0;
out_invalid_value:
- printk(KERN_INFO "NFS: bad mount option value specified: %s \n", p);
+ printk(KERN_INFO "NFS: bad mount option value specified: %s\n", p);
return 0;
out_nomem:
printk(KERN_INFO "NFS: not enough memory to parse option\n");
@@ -1445,13 +1363,60 @@
}
/*
+ * Match the requested auth flavors with the list returned by
+ * the server. Returns zero and sets the mount's authentication
+ * flavor on success; returns -EACCES if server does not support
+ * the requested flavor.
+ */
+static int nfs_walk_authlist(struct nfs_parsed_mount_data *args,
+ struct nfs_mount_request *request)
+{
+ unsigned int i, j, server_authlist_len = *(request->auth_flav_len);
+
+ /*
+ * Certain releases of Linux's mountd return an empty
+ * flavor list. To prevent behavioral regression with
+ * these servers (ie. rejecting mounts that used to
+ * succeed), revert to pre-2.6.32 behavior (no checking)
+ * if the returned flavor list is empty.
+ */
+ if (server_authlist_len == 0)
+ return 0;
+
+ /*
+ * We avoid sophisticated negotiating here, as there are
+ * plenty of cases where we can get it wrong, providing
+ * either too little or too much security.
+ *
+ * RFC 2623, section 2.7 suggests we SHOULD prefer the
+ * flavor listed first. However, some servers list
+ * AUTH_NULL first. Our caller plants AUTH_SYS, the
+ * preferred default, in args->auth_flavors[0] if user
+ * didn't specify sec= mount option.
+ */
+ for (i = 0; i < args->auth_flavor_len; i++)
+ for (j = 0; j < server_authlist_len; j++)
+ if (args->auth_flavors[i] == request->auth_flavs[j]) {
+ dfprintk(MOUNT, "NFS: using auth flavor %d\n",
+ request->auth_flavs[j]);
+ args->auth_flavors[0] = request->auth_flavs[j];
+ return 0;
+ }
+
+ dfprintk(MOUNT, "NFS: server does not support requested auth flavor\n");
+ nfs_umount(request);
+ return -EACCES;
+}
+
+/*
* Use the remote server's MOUNT service to request the NFS file handle
* corresponding to the provided path.
*/
static int nfs_try_mount(struct nfs_parsed_mount_data *args,
struct nfs_fh *root_fh)
{
- unsigned int auth_flavor_len = 0;
+ rpc_authflavor_t server_authlist[NFS_MAX_SECFLAVORS];
+ unsigned int server_authlist_len = ARRAY_SIZE(server_authlist);
struct nfs_mount_request request = {
.sap = (struct sockaddr *)
&args->mount_server.address,
@@ -1459,7 +1424,8 @@
.protocol = args->mount_server.protocol,
.fh = root_fh,
.noresvport = args->flags & NFS_MOUNT_NORESVPORT,
- .auth_flav_len = &auth_flavor_len,
+ .auth_flav_len = &server_authlist_len,
+ .auth_flavs = server_authlist,
};
int status;
@@ -1485,23 +1451,25 @@
args->mount_server.addrlen = args->nfs_server.addrlen;
}
request.salen = args->mount_server.addrlen;
-
- /*
- * autobind will be used if mount_server.port == 0
- */
- nfs_set_port(request.sap, args->mount_server.port);
+ nfs_set_default_port(request.sap, args->mount_server.port, 0);
/*
* Now ask the mount server to map our export path
* to a file handle.
*/
status = nfs_mount(&request);
- if (status == 0)
- return 0;
+ if (status != 0) {
+ dfprintk(MOUNT, "NFS: unable to mount server %s, error %d\n",
+ request.hostname, status);
+ return status;
+ }
- dfprintk(MOUNT, "NFS: unable to mount server %s, error %d\n",
- request.hostname, status);
- return status;
+ /*
+ * MNTv1 (NFSv2) does not support auth flavor negotiation.
+ */
+ if (args->mount_server.version != NFS_MNT3_VERSION)
+ return 0;
+ return nfs_walk_authlist(args, &request);
}
static int nfs_parse_simple_hostname(const char *dev_name,
@@ -1661,6 +1629,7 @@
const char *dev_name)
{
struct nfs_mount_data *data = (struct nfs_mount_data *)options;
+ struct sockaddr *sap = (struct sockaddr *)&args->nfs_server.address;
if (data == NULL)
goto out_no_data;
@@ -1672,10 +1641,12 @@
args->acregmax = NFS_DEF_ACREGMAX;
args->acdirmin = NFS_DEF_ACDIRMIN;
args->acdirmax = NFS_DEF_ACDIRMAX;
- args->mount_server.port = 0; /* autobind unless user sets port */
- args->nfs_server.port = 0; /* autobind unless user sets port */
+ args->mount_server.port = NFS_UNSPEC_PORT;
+ args->nfs_server.port = NFS_UNSPEC_PORT;
args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
args->auth_flavors[0] = RPC_AUTH_UNIX;
+ args->auth_flavor_len = 1;
+ args->minorversion = 0;
switch (data->version) {
case 1:
@@ -1697,8 +1668,11 @@
if (data->root.size > NFS3_FHSIZE || data->root.size == 0)
goto out_invalid_fh;
mntfh->size = data->root.size;
- } else
+ args->version = 3;
+ } else {
mntfh->size = NFS2_FHSIZE;
+ args->version = 2;
+ }
memcpy(mntfh->data, data->root.data, mntfh->size);
@@ -1720,11 +1694,9 @@
args->acdirmin = data->acdirmin;
args->acdirmax = data->acdirmax;
- memcpy(&args->nfs_server.address, &data->addr,
- sizeof(data->addr));
+ memcpy(sap, &data->addr, sizeof(data->addr));
args->nfs_server.addrlen = sizeof(data->addr);
- if (!nfs_verify_server_address((struct sockaddr *)
- &args->nfs_server.address))
+ if (!nfs_verify_server_address(sap))
goto out_no_address;
if (!(data->flags & NFS_MOUNT_TCP))
@@ -1772,12 +1744,18 @@
if (nfs_parse_mount_options((char *)options, args) == 0)
return -EINVAL;
- if (!nfs_verify_server_address((struct sockaddr *)
- &args->nfs_server.address))
+ if (!nfs_verify_server_address(sap))
goto out_no_address;
- nfs_set_port((struct sockaddr *)&args->nfs_server.address,
- args->nfs_server.port);
+ if (args->version == 4)
+#ifdef CONFIG_NFS_V4
+ return nfs4_validate_text_mount_data(options,
+ args, dev_name);
+#else
+ goto out_v4_not_compiled;
+#endif
+
+ nfs_set_default_port(sap, args->nfs_server.port, 0);
nfs_set_mount_transport_protocol(args);
@@ -1825,6 +1803,12 @@
return -EPROTONOSUPPORT;
#endif /* !CONFIG_NFS_V3 */
+#ifndef CONFIG_NFS_V4
+out_v4_not_compiled:
+ dfprintk(MOUNT, "NFS: NFSv4 is not compiled into kernel\n");
+ return -EPROTONOSUPPORT;
+#endif /* !CONFIG_NFS_V4 */
+
out_nomem:
dfprintk(MOUNT, "NFS: not enough memory to handle mount options\n");
return -ENOMEM;
@@ -2120,6 +2104,14 @@
if (error < 0)
goto out;
+#ifdef CONFIG_NFS_V4
+ if (data->version == 4) {
+ error = nfs4_try_mount(flags, dev_name, data, mnt);
+ kfree(data->client_address);
+ goto out;
+ }
+#endif /* CONFIG_NFS_V4 */
+
/* Get a volume representation */
server = nfs_create_server(data, mntfh);
if (IS_ERR(server)) {
@@ -2317,6 +2309,43 @@
args->flags &= ~(NFS_MOUNT_NONLM|NFS_MOUNT_NOACL|NFS_MOUNT_VER3);
}
+static int nfs4_validate_text_mount_data(void *options,
+ struct nfs_parsed_mount_data *args,
+ const char *dev_name)
+{
+ struct sockaddr *sap = (struct sockaddr *)&args->nfs_server.address;
+
+ nfs_set_default_port(sap, args->nfs_server.port, NFS_PORT);
+
+ nfs_validate_transport_protocol(args);
+
+ nfs4_validate_mount_flags(args);
+
+ if (args->version != 4) {
+ dfprintk(MOUNT,
+ "NFS4: Illegal mount version\n");
+ return -EINVAL;
+ }
+
+ if (args->auth_flavor_len > 1) {
+ dfprintk(MOUNT,
+ "NFS4: Too many RPC auth flavours specified\n");
+ return -EINVAL;
+ }
+
+ if (args->client_address == NULL) {
+ dfprintk(MOUNT,
+ "NFS4: mount program didn't pass callback address\n");
+ return -EINVAL;
+ }
+
+ return nfs_parse_devname(dev_name,
+ &args->nfs_server.hostname,
+ NFS4_MAXNAMLEN,
+ &args->nfs_server.export_path,
+ NFS4_MAXPATHLEN);
+}
+
/*
* Validate NFSv4 mount options
*/
@@ -2324,7 +2353,7 @@
struct nfs_parsed_mount_data *args,
const char *dev_name)
{
- struct sockaddr_in *ap;
+ struct sockaddr *sap = (struct sockaddr *)&args->nfs_server.address;
struct nfs4_mount_data *data = (struct nfs4_mount_data *)options;
char *c;
@@ -2337,23 +2366,22 @@
args->acregmax = NFS_DEF_ACREGMAX;
args->acdirmin = NFS_DEF_ACDIRMIN;
args->acdirmax = NFS_DEF_ACDIRMAX;
- args->nfs_server.port = NFS_PORT; /* 2049 unless user set port= */
+ args->nfs_server.port = NFS_UNSPEC_PORT;
args->auth_flavors[0] = RPC_AUTH_UNIX;
- args->auth_flavor_len = 0;
+ args->auth_flavor_len = 1;
+ args->version = 4;
args->minorversion = 0;
switch (data->version) {
case 1:
- ap = (struct sockaddr_in *)&args->nfs_server.address;
if (data->host_addrlen > sizeof(args->nfs_server.address))
goto out_no_address;
if (data->host_addrlen == 0)
goto out_no_address;
args->nfs_server.addrlen = data->host_addrlen;
- if (copy_from_user(ap, data->host_addr, data->host_addrlen))
+ if (copy_from_user(sap, data->host_addr, data->host_addrlen))
return -EFAULT;
- if (!nfs_verify_server_address((struct sockaddr *)
- &args->nfs_server.address))
+ if (!nfs_verify_server_address(sap))
goto out_no_address;
if (data->auth_flavourlen) {
@@ -2399,39 +2427,14 @@
nfs_validate_transport_protocol(args);
break;
- default: {
- int status;
-
+ default:
if (nfs_parse_mount_options((char *)options, args) == 0)
return -EINVAL;
- if (!nfs_verify_server_address((struct sockaddr *)
- &args->nfs_server.address))
+ if (!nfs_verify_server_address(sap))
return -EINVAL;
- nfs_set_port((struct sockaddr *)&args->nfs_server.address,
- args->nfs_server.port);
-
- nfs_validate_transport_protocol(args);
-
- nfs4_validate_mount_flags(args);
-
- if (args->auth_flavor_len > 1)
- goto out_inval_auth;
-
- if (args->client_address == NULL)
- goto out_no_client_address;
-
- status = nfs_parse_devname(dev_name,
- &args->nfs_server.hostname,
- NFS4_MAXNAMLEN,
- &args->nfs_server.export_path,
- NFS4_MAXPATHLEN);
- if (status < 0)
- return status;
-
- break;
- }
+ return nfs4_validate_text_mount_data(options, args, dev_name);
}
return 0;
@@ -2448,10 +2451,6 @@
out_no_address:
dfprintk(MOUNT, "NFS4: mount program didn't pass remote address\n");
return -EINVAL;
-
-out_no_client_address:
- dfprintk(MOUNT, "NFS4: mount program didn't pass callback address\n");
- return -EINVAL;
}
/*
@@ -2618,25 +2617,15 @@
return ret;
}
-/*
- * Get the superblock for an NFS4 mountpoint
- */
-static int nfs4_get_sb(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
+static int nfs4_try_mount(int flags, const char *dev_name,
+ struct nfs_parsed_mount_data *data,
+ struct vfsmount *mnt)
{
- struct nfs_parsed_mount_data *data;
char *export_path;
struct vfsmount *root_mnt;
- int error = -ENOMEM;
+ int error;
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (data == NULL)
- goto out_free_data;
-
- /* Validate the mount data */
- error = nfs4_validate_mount_data(raw_data, data, dev_name);
- if (error < 0)
- goto out;
+ dfprintk(MOUNT, "--> nfs4_try_mount()\n");
export_path = data->nfs_server.export_path;
data->nfs_server.export_path = "/";
@@ -2651,6 +2640,32 @@
error = nfs_follow_remote_path(root_mnt, export_path, mnt);
out:
+ dfprintk(MOUNT, "<-- nfs4_try_mount() = %d%s\n", error,
+ error != 0 ? " [error]" : "");
+ return error;
+}
+
+/*
+ * Get the superblock for an NFS4 mountpoint
+ */
+static int nfs4_get_sb(struct file_system_type *fs_type,
+ int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt)
+{
+ struct nfs_parsed_mount_data *data;
+ int error = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ goto out_free_data;
+
+ /* Validate the mount data */
+ error = nfs4_validate_mount_data(raw_data, data, dev_name);
+ if (error < 0)
+ goto out;
+
+ error = nfs4_try_mount(flags, dev_name, data, mnt);
+
+out:
kfree(data->client_address);
kfree(data->nfs_server.export_path);
kfree(data->nfs_server.hostname);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index a34fae2..120acad 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -13,6 +13,7 @@
#include <linux/file.h>
#include <linux/writeback.h>
#include <linux/swap.h>
+#include <linux/migrate.h>
#include <linux/sunrpc/clnt.h>
#include <linux/nfs_fs.h>
@@ -26,6 +27,7 @@
#include "internal.h"
#include "iostat.h"
#include "nfs4_fs.h"
+#include "fscache.h"
#define NFSDBG_FACILITY NFSDBG_PAGECACHE
@@ -218,24 +220,17 @@
clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
}
-/*
- * Find an associated nfs write request, and prepare to flush it out
- * May return an error if the user signalled nfs_wait_on_request().
- */
-static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
- struct page *page)
+static struct nfs_page *nfs_find_and_lock_request(struct page *page)
{
struct inode *inode = page->mapping->host;
struct nfs_page *req;
int ret;
spin_lock(&inode->i_lock);
- for(;;) {
+ for (;;) {
req = nfs_page_find_request_locked(page);
- if (req == NULL) {
- spin_unlock(&inode->i_lock);
- return 0;
- }
+ if (req == NULL)
+ break;
if (nfs_set_page_tag_locked(req))
break;
/* Note: If we hold the page lock, as is the case in nfs_writepage,
@@ -247,23 +242,40 @@
ret = nfs_wait_on_request(req);
nfs_release_request(req);
if (ret != 0)
- return ret;
+ return ERR_PTR(ret);
spin_lock(&inode->i_lock);
}
- if (test_bit(PG_CLEAN, &req->wb_flags)) {
- spin_unlock(&inode->i_lock);
- BUG();
- }
- if (nfs_set_page_writeback(page) != 0) {
- spin_unlock(&inode->i_lock);
- BUG();
- }
spin_unlock(&inode->i_lock);
+ return req;
+}
+
+/*
+ * Find an associated nfs write request, and prepare to flush it out
+ * May return an error if the user signalled nfs_wait_on_request().
+ */
+static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
+ struct page *page)
+{
+ struct nfs_page *req;
+ int ret = 0;
+
+ req = nfs_find_and_lock_request(page);
+ if (!req)
+ goto out;
+ ret = PTR_ERR(req);
+ if (IS_ERR(req))
+ goto out;
+
+ ret = nfs_set_page_writeback(page);
+ BUG_ON(ret != 0);
+ BUG_ON(test_bit(PG_CLEAN, &req->wb_flags));
+
if (!nfs_pageio_add_request(pgio, req)) {
nfs_redirty_request(req);
- return pgio->pg_error;
+ ret = pgio->pg_error;
}
- return 0;
+out:
+ return ret;
}
static int nfs_do_writepage(struct page *page, struct writeback_control *wbc, struct nfs_pageio_descriptor *pgio)
@@ -1580,6 +1592,41 @@
return nfs_wb_page_priority(inode, page, FLUSH_STABLE);
}
+#ifdef CONFIG_MIGRATION
+int nfs_migrate_page(struct address_space *mapping, struct page *newpage,
+ struct page *page)
+{
+ struct nfs_page *req;
+ int ret;
+
+ if (PageFsCache(page))
+ nfs_fscache_release_page(page, GFP_KERNEL);
+
+ req = nfs_find_and_lock_request(page);
+ ret = PTR_ERR(req);
+ if (IS_ERR(req))
+ goto out;
+
+ ret = migrate_page(mapping, newpage, page);
+ if (!req)
+ goto out;
+ if (ret)
+ goto out_unlock;
+ page_cache_get(newpage);
+ req->wb_page = newpage;
+ SetPagePrivate(newpage);
+ set_page_private(newpage, page_private(page));
+ ClearPagePrivate(page);
+ set_page_private(page, 0);
+ page_cache_release(page);
+out_unlock:
+ nfs_clear_page_tag_locked(req);
+ nfs_release_request(req);
+out:
+ return ret;
+}
+#endif
+
int __init nfs_init_writepagecache(void)
{
nfs_wdata_cachep = kmem_cache_create("nfs_write_data",
diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c
index 5573508..36fcabbf 100644
--- a/fs/nfsd/auth.c
+++ b/fs/nfsd/auth.c
@@ -34,6 +34,8 @@
int flags = nfsexp_flags(rqstp, exp);
int ret;
+ validate_process_creds();
+
/* discard any old override before preparing the new set */
revert_creds(get_cred(current->real_cred));
new = prepare_creds();
@@ -86,8 +88,10 @@
else
new->cap_effective = cap_raise_nfsd_set(new->cap_effective,
new->cap_permitted);
+ validate_process_creds();
put_cred(override_creds(new));
put_cred(new);
+ validate_process_creds();
return 0;
oom:
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index b92a276..d946264 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -85,6 +85,11 @@
(*bpp)[-1] = '\n';
}
+static int expkey_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, expkey_request);
+}
+
static struct svc_expkey *svc_expkey_update(struct svc_expkey *new, struct svc_expkey *old);
static struct svc_expkey *svc_expkey_lookup(struct svc_expkey *);
static struct cache_detail svc_expkey_cache;
@@ -259,7 +264,7 @@
.hash_table = expkey_table,
.name = "nfsd.fh",
.cache_put = expkey_put,
- .cache_request = expkey_request,
+ .cache_upcall = expkey_upcall,
.cache_parse = expkey_parse,
.cache_show = expkey_show,
.match = expkey_match,
@@ -355,6 +360,11 @@
(*bpp)[-1] = '\n';
}
+static int svc_export_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, svc_export_request);
+}
+
static struct svc_export *svc_export_update(struct svc_export *new,
struct svc_export *old);
static struct svc_export *svc_export_lookup(struct svc_export *);
@@ -724,7 +734,7 @@
.hash_table = export_table,
.name = "nfsd.export",
.cache_put = svc_export_put,
- .cache_request = svc_export_request,
+ .cache_upcall = svc_export_upcall,
.cache_parse = svc_export_parse,
.cache_show = svc_export_show,
.match = svc_export_match,
diff --git a/fs/nfsd/nfs4idmap.c b/fs/nfsd/nfs4idmap.c
index 5b39842..cdfa86f 100644
--- a/fs/nfsd/nfs4idmap.c
+++ b/fs/nfsd/nfs4idmap.c
@@ -146,6 +146,12 @@
}
static int
+idtoname_upcall(struct cache_detail *cd, struct cache_head *ch)
+{
+ return sunrpc_cache_pipe_upcall(cd, ch, idtoname_request);
+}
+
+static int
idtoname_match(struct cache_head *ca, struct cache_head *cb)
{
struct ent *a = container_of(ca, struct ent, h);
@@ -175,10 +181,10 @@
}
static void
-warn_no_idmapd(struct cache_detail *detail)
+warn_no_idmapd(struct cache_detail *detail, int has_died)
{
printk("nfsd: nfsv4 idmapping failing: has idmapd %s?\n",
- detail->last_close? "died" : "not been started");
+ has_died ? "died" : "not been started");
}
@@ -192,7 +198,7 @@
.hash_table = idtoname_table,
.name = "nfs4.idtoname",
.cache_put = ent_put,
- .cache_request = idtoname_request,
+ .cache_upcall = idtoname_upcall,
.cache_parse = idtoname_parse,
.cache_show = idtoname_show,
.warn_no_listener = warn_no_idmapd,
@@ -325,6 +331,12 @@
}
static int
+nametoid_upcall(struct cache_detail *cd, struct cache_head *ch)
+{
+ return sunrpc_cache_pipe_upcall(cd, ch, nametoid_request);
+}
+
+static int
nametoid_match(struct cache_head *ca, struct cache_head *cb)
{
struct ent *a = container_of(ca, struct ent, h);
@@ -363,7 +375,7 @@
.hash_table = nametoid_table,
.name = "nfs4.nametoid",
.cache_put = ent_put,
- .cache_request = nametoid_request,
+ .cache_upcall = nametoid_upcall,
.cache_parse = nametoid_parse,
.cache_show = nametoid_show,
.warn_no_listener = warn_no_idmapd,
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 6d08475..7e906c5 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -37,6 +37,7 @@
#include <linux/nfsd/xdr.h>
#include <linux/nfsd/syscall.h>
#include <linux/lockd/lockd.h>
+#include <linux/sunrpc/clnt.h>
#include <asm/uaccess.h>
#include <net/ipv6.h>
@@ -490,22 +491,18 @@
*
* Input:
* buf: '\n'-terminated C string containing a
- * presentation format IPv4 address
+ * presentation format IP address
* size: length of C string in @buf
* Output:
* On success: returns zero if all specified locks were released;
* returns one if one or more locks were not released
* On error: return code is negative errno value
- *
- * Note: Only AF_INET client addresses are passed in
*/
static ssize_t write_unlock_ip(struct file *file, char *buf, size_t size)
{
- struct sockaddr_in sin = {
- .sin_family = AF_INET,
- };
- int b1, b2, b3, b4;
- char c;
+ struct sockaddr_storage address;
+ struct sockaddr *sap = (struct sockaddr *)&address;
+ size_t salen = sizeof(address);
char *fo_path;
/* sanity check */
@@ -519,14 +516,10 @@
if (qword_get(&buf, fo_path, size) < 0)
return -EINVAL;
- /* get ipv4 address */
- if (sscanf(fo_path, "%u.%u.%u.%u%c", &b1, &b2, &b3, &b4, &c) != 4)
+ if (rpc_pton(fo_path, size, sap, salen) == 0)
return -EINVAL;
- if (b1 > 255 || b2 > 255 || b3 > 255 || b4 > 255)
- return -EINVAL;
- sin.sin_addr.s_addr = htonl((b1 << 24) | (b2 << 16) | (b3 << 8) | b4);
- return nlmsvc_unlock_all_by_ip((struct sockaddr *)&sin);
+ return nlmsvc_unlock_all_by_ip(sap);
}
/**
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 492c79b..24d58ad 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -496,7 +496,9 @@
/* Lock the export hash tables for reading. */
exp_readlock();
+ validate_process_creds();
svc_process(rqstp);
+ validate_process_creds();
/* Unlock export hash tables */
exp_readunlock();
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 23341c1..8fa09bf 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -684,6 +684,8 @@
__be32 err;
int host_err;
+ validate_process_creds();
+
/*
* If we get here, then the client has already done an "open",
* and (hopefully) checked permission - so allow OWNER_OVERRIDE
@@ -740,6 +742,7 @@
out_nfserr:
err = nfserrno(host_err);
out:
+ validate_process_creds();
return err;
}
diff --git a/fs/nilfs2/Kconfig b/fs/nilfs2/Kconfig
index 72da095..251da07 100644
--- a/fs/nilfs2/Kconfig
+++ b/fs/nilfs2/Kconfig
@@ -1,6 +1,6 @@
config NILFS2_FS
tristate "NILFS2 file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
+ depends on EXPERIMENTAL
select CRC32
help
NILFS2 is a log-structured file system (LFS) supporting continuous
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 99d58a0..08834df 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -36,6 +36,26 @@
return nilfs_dat_inode(NILFS_I_NILFS(bmap->b_inode));
}
+/**
+ * nilfs_bmap_lookup_at_level - find a data block or node block
+ * @bmap: bmap
+ * @key: key
+ * @level: level
+ * @ptrp: place to store the value associated to @key
+ *
+ * Description: nilfs_bmap_lookup_at_level() finds a record whose key
+ * matches @key in the block at @level of the bmap.
+ *
+ * Return Value: On success, 0 is returned and the record associated with @key
+ * is stored in the place pointed by @ptrp. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-ENOENT - A record associated with @key does not exist.
+ */
int nilfs_bmap_lookup_at_level(struct nilfs_bmap *bmap, __u64 key, int level,
__u64 *ptrp)
{
@@ -69,39 +89,6 @@
return ret;
}
-/**
- * nilfs_bmap_lookup - find a record
- * @bmap: bmap
- * @key: key
- * @recp: pointer to record
- *
- * Description: nilfs_bmap_lookup() finds a record whose key matches @key in
- * @bmap.
- *
- * Return Value: On success, 0 is returned and the record associated with @key
- * is stored in the place pointed by @recp. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- *
- * %-ENOENT - A record associated with @key does not exist.
- */
-int nilfs_bmap_lookup(struct nilfs_bmap *bmap,
- unsigned long key,
- unsigned long *recp)
-{
- __u64 ptr;
- int ret;
-
- /* XXX: use macro for level 1 */
- ret = nilfs_bmap_lookup_at_level(bmap, key, 1, &ptr);
- if (recp != NULL)
- *recp = ptr;
- return ret;
-}
-
static int nilfs_bmap_do_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
{
__u64 keys[NILFS_BMAP_SMALL_HIGH + 1];
@@ -469,104 +456,6 @@
(entries_per_group / NILFS_BMAP_GROUP_DIV);
}
-int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
-{
- return nilfs_dat_prepare_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
-{
- nilfs_dat_commit_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
-{
- nilfs_dat_abort_alloc(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-int nilfs_bmap_start_v(struct nilfs_bmap *bmap, union nilfs_bmap_ptr_req *req,
- sector_t blocknr)
-{
- struct inode *dat = nilfs_bmap_get_dat(bmap);
- int ret;
-
- ret = nilfs_dat_prepare_start(dat, &req->bpr_req);
- if (likely(!ret))
- nilfs_dat_commit_start(dat, &req->bpr_req, blocknr);
- return ret;
-}
-
-int nilfs_bmap_prepare_end_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
-{
- return nilfs_dat_prepare_end(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-void nilfs_bmap_commit_end_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
-{
- nilfs_dat_commit_end(nilfs_bmap_get_dat(bmap), &req->bpr_req,
- bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
-}
-
-void nilfs_bmap_abort_end_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
-{
- nilfs_dat_abort_end(nilfs_bmap_get_dat(bmap), &req->bpr_req);
-}
-
-int nilfs_bmap_move_v(const struct nilfs_bmap *bmap, __u64 vblocknr,
- sector_t blocknr)
-{
- return nilfs_dat_move(nilfs_bmap_get_dat(bmap), vblocknr, blocknr);
-}
-
-int nilfs_bmap_mark_dirty(const struct nilfs_bmap *bmap, __u64 vblocknr)
-{
- return nilfs_dat_mark_dirty(nilfs_bmap_get_dat(bmap), vblocknr);
-}
-
-int nilfs_bmap_prepare_update_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *oldreq,
- union nilfs_bmap_ptr_req *newreq)
-{
- struct inode *dat = nilfs_bmap_get_dat(bmap);
- int ret;
-
- ret = nilfs_dat_prepare_end(dat, &oldreq->bpr_req);
- if (ret < 0)
- return ret;
- ret = nilfs_dat_prepare_alloc(dat, &newreq->bpr_req);
- if (ret < 0)
- nilfs_dat_abort_end(dat, &oldreq->bpr_req);
-
- return ret;
-}
-
-void nilfs_bmap_commit_update_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *oldreq,
- union nilfs_bmap_ptr_req *newreq)
-{
- struct inode *dat = nilfs_bmap_get_dat(bmap);
-
- nilfs_dat_commit_end(dat, &oldreq->bpr_req,
- bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
- nilfs_dat_commit_alloc(dat, &newreq->bpr_req);
-}
-
-void nilfs_bmap_abort_update_v(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *oldreq,
- union nilfs_bmap_ptr_req *newreq)
-{
- struct inode *dat = nilfs_bmap_get_dat(bmap);
-
- nilfs_dat_abort_end(dat, &oldreq->bpr_req);
- nilfs_dat_abort_alloc(dat, &newreq->bpr_req);
-}
-
static struct lock_class_key nilfs_bmap_dat_lock_key;
static struct lock_class_key nilfs_bmap_mdt_lock_key;
diff --git a/fs/nilfs2/bmap.h b/fs/nilfs2/bmap.h
index b2890cd..9980d7d 100644
--- a/fs/nilfs2/bmap.h
+++ b/fs/nilfs2/bmap.h
@@ -28,6 +28,7 @@
#include <linux/buffer_head.h>
#include <linux/nilfs2_fs.h>
#include "alloc.h"
+#include "dat.h"
#define NILFS_BMAP_INVALID_PTR 0
@@ -141,7 +142,6 @@
int nilfs_bmap_test_and_clear_dirty(struct nilfs_bmap *);
int nilfs_bmap_read(struct nilfs_bmap *, struct nilfs_inode *);
void nilfs_bmap_write(struct nilfs_bmap *, struct nilfs_inode *);
-int nilfs_bmap_lookup(struct nilfs_bmap *, unsigned long, unsigned long *);
int nilfs_bmap_lookup_contig(struct nilfs_bmap *, __u64, __u64 *, unsigned);
int nilfs_bmap_insert(struct nilfs_bmap *, unsigned long, unsigned long);
int nilfs_bmap_delete(struct nilfs_bmap *, unsigned long);
@@ -160,90 +160,76 @@
void nilfs_bmap_commit_gcdat(struct nilfs_bmap *, struct nilfs_bmap *);
+static inline int nilfs_bmap_lookup(struct nilfs_bmap *bmap, __u64 key,
+ __u64 *ptr)
+{
+ return nilfs_bmap_lookup_at_level(bmap, key, 1, ptr);
+}
+
/*
* Internal use only
*/
struct inode *nilfs_bmap_get_dat(const struct nilfs_bmap *);
-int nilfs_bmap_prepare_alloc_v(struct nilfs_bmap *,
- union nilfs_bmap_ptr_req *);
-void nilfs_bmap_commit_alloc_v(struct nilfs_bmap *,
- union nilfs_bmap_ptr_req *);
-void nilfs_bmap_abort_alloc_v(struct nilfs_bmap *,
- union nilfs_bmap_ptr_req *);
static inline int nilfs_bmap_prepare_alloc_ptr(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
+ union nilfs_bmap_ptr_req *req,
+ struct inode *dat)
{
- if (NILFS_BMAP_USE_VBN(bmap))
- return nilfs_bmap_prepare_alloc_v(bmap, req);
+ if (dat)
+ return nilfs_dat_prepare_alloc(dat, &req->bpr_req);
/* ignore target ptr */
req->bpr_ptr = bmap->b_last_allocated_ptr++;
return 0;
}
static inline void nilfs_bmap_commit_alloc_ptr(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
+ union nilfs_bmap_ptr_req *req,
+ struct inode *dat)
{
- if (NILFS_BMAP_USE_VBN(bmap))
- nilfs_bmap_commit_alloc_v(bmap, req);
+ if (dat)
+ nilfs_dat_commit_alloc(dat, &req->bpr_req);
}
static inline void nilfs_bmap_abort_alloc_ptr(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
+ union nilfs_bmap_ptr_req *req,
+ struct inode *dat)
{
- if (NILFS_BMAP_USE_VBN(bmap))
- nilfs_bmap_abort_alloc_v(bmap, req);
+ if (dat)
+ nilfs_dat_abort_alloc(dat, &req->bpr_req);
else
bmap->b_last_allocated_ptr--;
}
-int nilfs_bmap_prepare_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
-void nilfs_bmap_commit_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
-void nilfs_bmap_abort_end_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *);
-
static inline int nilfs_bmap_prepare_end_ptr(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
+ union nilfs_bmap_ptr_req *req,
+ struct inode *dat)
{
- return NILFS_BMAP_USE_VBN(bmap) ?
- nilfs_bmap_prepare_end_v(bmap, req) : 0;
+ return dat ? nilfs_dat_prepare_end(dat, &req->bpr_req) : 0;
}
static inline void nilfs_bmap_commit_end_ptr(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
+ union nilfs_bmap_ptr_req *req,
+ struct inode *dat)
{
- if (NILFS_BMAP_USE_VBN(bmap))
- nilfs_bmap_commit_end_v(bmap, req);
+ if (dat)
+ nilfs_dat_commit_end(dat, &req->bpr_req,
+ bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
}
static inline void nilfs_bmap_abort_end_ptr(struct nilfs_bmap *bmap,
- union nilfs_bmap_ptr_req *req)
+ union nilfs_bmap_ptr_req *req,
+ struct inode *dat)
{
- if (NILFS_BMAP_USE_VBN(bmap))
- nilfs_bmap_abort_end_v(bmap, req);
+ if (dat)
+ nilfs_dat_abort_end(dat, &req->bpr_req);
}
-int nilfs_bmap_start_v(struct nilfs_bmap *, union nilfs_bmap_ptr_req *,
- sector_t);
-int nilfs_bmap_move_v(const struct nilfs_bmap *, __u64, sector_t);
-int nilfs_bmap_mark_dirty(const struct nilfs_bmap *, __u64);
-
-
__u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *,
const struct buffer_head *);
__u64 nilfs_bmap_find_target_seq(const struct nilfs_bmap *, __u64);
__u64 nilfs_bmap_find_target_in_group(const struct nilfs_bmap *);
-int nilfs_bmap_prepare_update_v(struct nilfs_bmap *,
- union nilfs_bmap_ptr_req *,
- union nilfs_bmap_ptr_req *);
-void nilfs_bmap_commit_update_v(struct nilfs_bmap *,
- union nilfs_bmap_ptr_req *,
- union nilfs_bmap_ptr_req *);
-void nilfs_bmap_abort_update_v(struct nilfs_bmap *,
- union nilfs_bmap_ptr_req *,
- union nilfs_bmap_ptr_req *);
-
void nilfs_bmap_add_blocks(const struct nilfs_bmap *, int);
void nilfs_bmap_sub_blocks(const struct nilfs_bmap *, int);
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 7e0b61b..c668bca 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -209,6 +209,7 @@
* We cannot call radix_tree_preload for the kernels older
* than 2.6.23, because it is not exported for modules.
*/
+retry:
err = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
if (err)
goto failed_unlock;
@@ -219,7 +220,6 @@
(unsigned long long)oldkey,
(unsigned long long)newkey);
-retry:
spin_lock_irq(&btnc->tree_lock);
err = radix_tree_insert(&btnc->page_tree, newkey, obh->b_page);
spin_unlock_irq(&btnc->tree_lock);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index aa41272..e25b507 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -71,21 +71,17 @@
kmem_cache_destroy(nilfs_btree_path_cache);
}
-static inline struct nilfs_btree_path *
-nilfs_btree_alloc_path(const struct nilfs_btree *btree)
+static inline struct nilfs_btree_path *nilfs_btree_alloc_path(void)
{
- return (struct nilfs_btree_path *)
- kmem_cache_alloc(nilfs_btree_path_cache, GFP_NOFS);
+ return kmem_cache_alloc(nilfs_btree_path_cache, GFP_NOFS);
}
-static inline void nilfs_btree_free_path(const struct nilfs_btree *btree,
- struct nilfs_btree_path *path)
+static inline void nilfs_btree_free_path(struct nilfs_btree_path *path)
{
kmem_cache_free(nilfs_btree_path_cache, path);
}
-static void nilfs_btree_init_path(const struct nilfs_btree *btree,
- struct nilfs_btree_path *path)
+static void nilfs_btree_init_path(struct nilfs_btree_path *path)
{
int level;
@@ -101,26 +97,13 @@
}
}
-static void nilfs_btree_clear_path(const struct nilfs_btree *btree,
- struct nilfs_btree_path *path)
+static void nilfs_btree_release_path(struct nilfs_btree_path *path)
{
int level;
- for (level = NILFS_BTREE_LEVEL_DATA;
- level < NILFS_BTREE_LEVEL_MAX;
- level++) {
- if (path[level].bp_bh != NULL) {
- brelse(path[level].bp_bh);
- path[level].bp_bh = NULL;
- }
- /* sib_bh is released or deleted by prepare or commit
- * operations. */
- path[level].bp_sib_bh = NULL;
- path[level].bp_index = 0;
- path[level].bp_oldreq.bpr_ptr = NILFS_BMAP_INVALID_PTR;
- path[level].bp_newreq.bpr_ptr = NILFS_BMAP_INVALID_PTR;
- path[level].bp_op = NULL;
- }
+ for (level = NILFS_BTREE_LEVEL_DATA; level < NILFS_BTREE_LEVEL_MAX;
+ level++)
+ brelse(path[level].bp_bh);
}
/*
@@ -148,129 +131,110 @@
}
static inline int
-nilfs_btree_node_get_flags(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_get_flags(const struct nilfs_btree_node *node)
{
return node->bn_flags;
}
static inline void
-nilfs_btree_node_set_flags(struct nilfs_btree *btree,
- struct nilfs_btree_node *node,
- int flags)
+nilfs_btree_node_set_flags(struct nilfs_btree_node *node, int flags)
{
node->bn_flags = flags;
}
-static inline int nilfs_btree_node_root(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+static inline int nilfs_btree_node_root(const struct nilfs_btree_node *node)
{
- return nilfs_btree_node_get_flags(btree, node) & NILFS_BTREE_NODE_ROOT;
+ return nilfs_btree_node_get_flags(node) & NILFS_BTREE_NODE_ROOT;
}
static inline int
-nilfs_btree_node_get_level(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_get_level(const struct nilfs_btree_node *node)
{
return node->bn_level;
}
static inline void
-nilfs_btree_node_set_level(struct nilfs_btree *btree,
- struct nilfs_btree_node *node,
- int level)
+nilfs_btree_node_set_level(struct nilfs_btree_node *node, int level)
{
node->bn_level = level;
}
static inline int
-nilfs_btree_node_get_nchildren(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_get_nchildren(const struct nilfs_btree_node *node)
{
return le16_to_cpu(node->bn_nchildren);
}
static inline void
-nilfs_btree_node_set_nchildren(struct nilfs_btree *btree,
- struct nilfs_btree_node *node,
- int nchildren)
+nilfs_btree_node_set_nchildren(struct nilfs_btree_node *node, int nchildren)
{
node->bn_nchildren = cpu_to_le16(nchildren);
}
-static inline int
-nilfs_btree_node_size(const struct nilfs_btree *btree)
+static inline int nilfs_btree_node_size(const struct nilfs_btree *btree)
{
return 1 << btree->bt_bmap.b_inode->i_blkbits;
}
static inline int
-nilfs_btree_node_nchildren_min(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_nchildren_min(const struct nilfs_btree_node *node,
+ const struct nilfs_btree *btree)
{
- return nilfs_btree_node_root(btree, node) ?
+ return nilfs_btree_node_root(node) ?
NILFS_BTREE_ROOT_NCHILDREN_MIN :
NILFS_BTREE_NODE_NCHILDREN_MIN(nilfs_btree_node_size(btree));
}
static inline int
-nilfs_btree_node_nchildren_max(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_nchildren_max(const struct nilfs_btree_node *node,
+ const struct nilfs_btree *btree)
{
- return nilfs_btree_node_root(btree, node) ?
+ return nilfs_btree_node_root(node) ?
NILFS_BTREE_ROOT_NCHILDREN_MAX :
NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(btree));
}
static inline __le64 *
-nilfs_btree_node_dkeys(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_dkeys(const struct nilfs_btree_node *node)
{
return (__le64 *)((char *)(node + 1) +
- (nilfs_btree_node_root(btree, node) ?
+ (nilfs_btree_node_root(node) ?
0 : NILFS_BTREE_NODE_EXTRA_PAD_SIZE));
}
static inline __le64 *
-nilfs_btree_node_dptrs(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node)
+nilfs_btree_node_dptrs(const struct nilfs_btree_node *node,
+ const struct nilfs_btree *btree)
{
- return (__le64 *)(nilfs_btree_node_dkeys(btree, node) +
- nilfs_btree_node_nchildren_max(btree, node));
+ return (__le64 *)(nilfs_btree_node_dkeys(node) +
+ nilfs_btree_node_nchildren_max(node, btree));
}
static inline __u64
-nilfs_btree_node_get_key(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node, int index)
+nilfs_btree_node_get_key(const struct nilfs_btree_node *node, int index)
{
- return nilfs_bmap_dkey_to_key(*(nilfs_btree_node_dkeys(btree, node) +
- index));
+ return nilfs_bmap_dkey_to_key(*(nilfs_btree_node_dkeys(node) + index));
}
static inline void
-nilfs_btree_node_set_key(struct nilfs_btree *btree,
- struct nilfs_btree_node *node, int index, __u64 key)
+nilfs_btree_node_set_key(struct nilfs_btree_node *node, int index, __u64 key)
{
- *(nilfs_btree_node_dkeys(btree, node) + index) =
- nilfs_bmap_key_to_dkey(key);
+ *(nilfs_btree_node_dkeys(node) + index) = nilfs_bmap_key_to_dkey(key);
}
static inline __u64
nilfs_btree_node_get_ptr(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node,
- int index)
+ const struct nilfs_btree_node *node, int index)
{
- return nilfs_bmap_dptr_to_ptr(*(nilfs_btree_node_dptrs(btree, node) +
+ return nilfs_bmap_dptr_to_ptr(*(nilfs_btree_node_dptrs(node, btree) +
index));
}
static inline void
nilfs_btree_node_set_ptr(struct nilfs_btree *btree,
- struct nilfs_btree_node *node,
- int index,
- __u64 ptr)
+ struct nilfs_btree_node *node, int index, __u64 ptr)
{
- *(nilfs_btree_node_dptrs(btree, node) + index) =
+ *(nilfs_btree_node_dptrs(node, btree) + index) =
nilfs_bmap_ptr_to_dptr(ptr);
}
@@ -283,12 +247,12 @@
__le64 *dptrs;
int i;
- nilfs_btree_node_set_flags(btree, node, flags);
- nilfs_btree_node_set_level(btree, node, level);
- nilfs_btree_node_set_nchildren(btree, node, nchildren);
+ nilfs_btree_node_set_flags(node, flags);
+ nilfs_btree_node_set_level(node, level);
+ nilfs_btree_node_set_nchildren(node, nchildren);
- dkeys = nilfs_btree_node_dkeys(btree, node);
- dptrs = nilfs_btree_node_dptrs(btree, node);
+ dkeys = nilfs_btree_node_dkeys(node);
+ dptrs = nilfs_btree_node_dptrs(node, btree);
for (i = 0; i < nchildren; i++) {
dkeys[i] = nilfs_bmap_key_to_dkey(keys[i]);
dptrs[i] = nilfs_bmap_ptr_to_dptr(ptrs[i]);
@@ -305,13 +269,13 @@
__le64 *ldptrs, *rdptrs;
int lnchildren, rnchildren;
- ldkeys = nilfs_btree_node_dkeys(btree, left);
- ldptrs = nilfs_btree_node_dptrs(btree, left);
- lnchildren = nilfs_btree_node_get_nchildren(btree, left);
+ ldkeys = nilfs_btree_node_dkeys(left);
+ ldptrs = nilfs_btree_node_dptrs(left, btree);
+ lnchildren = nilfs_btree_node_get_nchildren(left);
- rdkeys = nilfs_btree_node_dkeys(btree, right);
- rdptrs = nilfs_btree_node_dptrs(btree, right);
- rnchildren = nilfs_btree_node_get_nchildren(btree, right);
+ rdkeys = nilfs_btree_node_dkeys(right);
+ rdptrs = nilfs_btree_node_dptrs(right, btree);
+ rnchildren = nilfs_btree_node_get_nchildren(right);
memcpy(ldkeys + lnchildren, rdkeys, n * sizeof(*rdkeys));
memcpy(ldptrs + lnchildren, rdptrs, n * sizeof(*rdptrs));
@@ -320,8 +284,8 @@
lnchildren += n;
rnchildren -= n;
- nilfs_btree_node_set_nchildren(btree, left, lnchildren);
- nilfs_btree_node_set_nchildren(btree, right, rnchildren);
+ nilfs_btree_node_set_nchildren(left, lnchildren);
+ nilfs_btree_node_set_nchildren(right, rnchildren);
}
/* Assume that the buffer heads corresponding to left and right are locked. */
@@ -334,13 +298,13 @@
__le64 *ldptrs, *rdptrs;
int lnchildren, rnchildren;
- ldkeys = nilfs_btree_node_dkeys(btree, left);
- ldptrs = nilfs_btree_node_dptrs(btree, left);
- lnchildren = nilfs_btree_node_get_nchildren(btree, left);
+ ldkeys = nilfs_btree_node_dkeys(left);
+ ldptrs = nilfs_btree_node_dptrs(left, btree);
+ lnchildren = nilfs_btree_node_get_nchildren(left);
- rdkeys = nilfs_btree_node_dkeys(btree, right);
- rdptrs = nilfs_btree_node_dptrs(btree, right);
- rnchildren = nilfs_btree_node_get_nchildren(btree, right);
+ rdkeys = nilfs_btree_node_dkeys(right);
+ rdptrs = nilfs_btree_node_dptrs(right, btree);
+ rnchildren = nilfs_btree_node_get_nchildren(right);
memmove(rdkeys + n, rdkeys, rnchildren * sizeof(*rdkeys));
memmove(rdptrs + n, rdptrs, rnchildren * sizeof(*rdptrs));
@@ -349,8 +313,8 @@
lnchildren -= n;
rnchildren += n;
- nilfs_btree_node_set_nchildren(btree, left, lnchildren);
- nilfs_btree_node_set_nchildren(btree, right, rnchildren);
+ nilfs_btree_node_set_nchildren(left, lnchildren);
+ nilfs_btree_node_set_nchildren(right, rnchildren);
}
/* Assume that the buffer head corresponding to node is locked. */
@@ -362,9 +326,9 @@
__le64 *dptrs;
int nchildren;
- dkeys = nilfs_btree_node_dkeys(btree, node);
- dptrs = nilfs_btree_node_dptrs(btree, node);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
+ dkeys = nilfs_btree_node_dkeys(node);
+ dptrs = nilfs_btree_node_dptrs(node, btree);
+ nchildren = nilfs_btree_node_get_nchildren(node);
if (index < nchildren) {
memmove(dkeys + index + 1, dkeys + index,
(nchildren - index) * sizeof(*dkeys));
@@ -374,7 +338,7 @@
dkeys[index] = nilfs_bmap_key_to_dkey(key);
dptrs[index] = nilfs_bmap_ptr_to_dptr(ptr);
nchildren++;
- nilfs_btree_node_set_nchildren(btree, node, nchildren);
+ nilfs_btree_node_set_nchildren(node, nchildren);
}
/* Assume that the buffer head corresponding to node is locked. */
@@ -388,11 +352,11 @@
__le64 *dptrs;
int nchildren;
- dkeys = nilfs_btree_node_dkeys(btree, node);
- dptrs = nilfs_btree_node_dptrs(btree, node);
+ dkeys = nilfs_btree_node_dkeys(node);
+ dptrs = nilfs_btree_node_dptrs(node, btree);
key = nilfs_bmap_dkey_to_key(dkeys[index]);
ptr = nilfs_bmap_dptr_to_ptr(dptrs[index]);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
+ nchildren = nilfs_btree_node_get_nchildren(node);
if (keyp != NULL)
*keyp = key;
if (ptrp != NULL)
@@ -405,11 +369,10 @@
(nchildren - index - 1) * sizeof(*dptrs));
}
nchildren--;
- nilfs_btree_node_set_nchildren(btree, node, nchildren);
+ nilfs_btree_node_set_nchildren(node, nchildren);
}
-static int nilfs_btree_node_lookup(const struct nilfs_btree *btree,
- const struct nilfs_btree_node *node,
+static int nilfs_btree_node_lookup(const struct nilfs_btree_node *node,
__u64 key, int *indexp)
{
__u64 nkey;
@@ -417,12 +380,12 @@
/* binary search */
low = 0;
- high = nilfs_btree_node_get_nchildren(btree, node) - 1;
+ high = nilfs_btree_node_get_nchildren(node) - 1;
index = 0;
s = 0;
while (low <= high) {
index = (low + high) / 2;
- nkey = nilfs_btree_node_get_key(btree, node, index);
+ nkey = nilfs_btree_node_get_key(node, index);
if (nkey == key) {
s = 0;
goto out;
@@ -436,9 +399,8 @@
}
/* adjust index */
- if (nilfs_btree_node_get_level(btree, node) >
- NILFS_BTREE_LEVEL_NODE_MIN) {
- if ((s > 0) && (index > 0))
+ if (nilfs_btree_node_get_level(node) > NILFS_BTREE_LEVEL_NODE_MIN) {
+ if (s > 0 && index > 0)
index--;
} else if (s < 0)
index++;
@@ -456,25 +418,20 @@
}
static inline struct nilfs_btree_node *
-nilfs_btree_get_nonroot_node(const struct nilfs_btree *btree,
- const struct nilfs_btree_path *path,
- int level)
+nilfs_btree_get_nonroot_node(const struct nilfs_btree_path *path, int level)
{
return (struct nilfs_btree_node *)path[level].bp_bh->b_data;
}
static inline struct nilfs_btree_node *
-nilfs_btree_get_sib_node(const struct nilfs_btree *btree,
- const struct nilfs_btree_path *path,
- int level)
+nilfs_btree_get_sib_node(const struct nilfs_btree_path *path, int level)
{
return (struct nilfs_btree_node *)path[level].bp_sib_bh->b_data;
}
static inline int nilfs_btree_height(const struct nilfs_btree *btree)
{
- return nilfs_btree_node_get_level(btree, nilfs_btree_get_root(btree))
- + 1;
+ return nilfs_btree_node_get_level(nilfs_btree_get_root(btree)) + 1;
}
static inline struct nilfs_btree_node *
@@ -484,7 +441,7 @@
{
return (level == nilfs_btree_height(btree) - 1) ?
nilfs_btree_get_root(btree) :
- nilfs_btree_get_nonroot_node(btree, path, level);
+ nilfs_btree_get_nonroot_node(path, level);
}
static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
@@ -496,12 +453,11 @@
int level, index, found, ret;
node = nilfs_btree_get_root(btree);
- level = nilfs_btree_node_get_level(btree, node);
- if ((level < minlevel) ||
- (nilfs_btree_node_get_nchildren(btree, node) <= 0))
+ level = nilfs_btree_node_get_level(node);
+ if (level < minlevel || nilfs_btree_node_get_nchildren(node) <= 0)
return -ENOENT;
- found = nilfs_btree_node_lookup(btree, node, key, &index);
+ found = nilfs_btree_node_lookup(node, key, &index);
ptr = nilfs_btree_node_get_ptr(btree, node, index);
path[level].bp_bh = NULL;
path[level].bp_index = index;
@@ -510,14 +466,13 @@
ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
if (ret < 0)
return ret;
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- BUG_ON(level != nilfs_btree_node_get_level(btree, node));
+ node = nilfs_btree_get_nonroot_node(path, level);
+ BUG_ON(level != nilfs_btree_node_get_level(node));
if (!found)
- found = nilfs_btree_node_lookup(btree, node, key,
- &index);
+ found = nilfs_btree_node_lookup(node, key, &index);
else
index = 0;
- if (index < nilfs_btree_node_nchildren_max(btree, node))
+ if (index < nilfs_btree_node_nchildren_max(node, btree))
ptr = nilfs_btree_node_get_ptr(btree, node, index);
else {
WARN_ON(found || level != NILFS_BTREE_LEVEL_NODE_MIN);
@@ -544,10 +499,10 @@
int index, level, ret;
node = nilfs_btree_get_root(btree);
- index = nilfs_btree_node_get_nchildren(btree, node) - 1;
+ index = nilfs_btree_node_get_nchildren(node) - 1;
if (index < 0)
return -ENOENT;
- level = nilfs_btree_node_get_level(btree, node);
+ level = nilfs_btree_node_get_level(node);
ptr = nilfs_btree_node_get_ptr(btree, node, index);
path[level].bp_bh = NULL;
path[level].bp_index = index;
@@ -556,15 +511,15 @@
ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
if (ret < 0)
return ret;
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- BUG_ON(level != nilfs_btree_node_get_level(btree, node));
- index = nilfs_btree_node_get_nchildren(btree, node) - 1;
+ node = nilfs_btree_get_nonroot_node(path, level);
+ BUG_ON(level != nilfs_btree_node_get_level(node));
+ index = nilfs_btree_node_get_nchildren(node) - 1;
ptr = nilfs_btree_node_get_ptr(btree, node, index);
path[level].bp_index = index;
}
if (keyp != NULL)
- *keyp = nilfs_btree_node_get_key(btree, node, index);
+ *keyp = nilfs_btree_node_get_key(node, index);
if (ptrp != NULL)
*ptrp = ptr;
@@ -580,18 +535,18 @@
int ret;
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level);
if (ptrp != NULL)
*ptrp = ptr;
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -608,10 +563,10 @@
int level = NILFS_BTREE_LEVEL_NODE_MIN;
int ret, cnt, index, maxlevel;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level);
if (ret < 0)
goto out;
@@ -631,8 +586,8 @@
node = nilfs_btree_get_node(btree, path, level);
index = path[level].bp_index + 1;
for (;;) {
- while (index < nilfs_btree_node_get_nchildren(btree, node)) {
- if (nilfs_btree_node_get_key(btree, node, index) !=
+ while (index < nilfs_btree_node_get_nchildren(node)) {
+ if (nilfs_btree_node_get_key(node, index) !=
key + cnt)
goto end;
ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
@@ -653,8 +608,8 @@
/* look-up right sibling node */
node = nilfs_btree_get_node(btree, path, level + 1);
index = path[level + 1].bp_index + 1;
- if (index >= nilfs_btree_node_get_nchildren(btree, node) ||
- nilfs_btree_node_get_key(btree, node, index) != key + cnt)
+ if (index >= nilfs_btree_node_get_nchildren(node) ||
+ nilfs_btree_node_get_key(node, index) != key + cnt)
break;
ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
path[level + 1].bp_index = index;
@@ -664,7 +619,7 @@
ret = nilfs_btree_get_block(btree, ptr2, &path[level].bp_bh);
if (ret < 0)
goto out;
- node = nilfs_btree_get_nonroot_node(btree, path, level);
+ node = nilfs_btree_get_nonroot_node(path, level);
index = 0;
path[level].bp_index = index;
}
@@ -672,8 +627,8 @@
*ptrp = ptr;
ret = cnt;
out:
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -685,9 +640,7 @@
do {
lock_buffer(path[level].bp_bh);
nilfs_btree_node_set_key(
- btree,
- nilfs_btree_get_nonroot_node(
- btree, path, level),
+ nilfs_btree_get_nonroot_node(path, level),
path[level].bp_index, key);
if (!buffer_dirty(path[level].bp_bh))
nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -698,8 +651,7 @@
/* root */
if (level == nilfs_btree_height(btree) - 1) {
- nilfs_btree_node_set_key(btree,
- nilfs_btree_get_root(btree),
+ nilfs_btree_node_set_key(nilfs_btree_get_root(btree),
path[level].bp_index, key);
}
}
@@ -712,7 +664,7 @@
if (level < nilfs_btree_height(btree) - 1) {
lock_buffer(path[level].bp_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
+ node = nilfs_btree_get_nonroot_node(path, level);
nilfs_btree_node_insert(btree, node, *keyp, *ptrp,
path[level].bp_index);
if (!buffer_dirty(path[level].bp_bh))
@@ -721,8 +673,8 @@
if (path[level].bp_index == 0)
nilfs_btree_promote_key(btree, path, level + 1,
- nilfs_btree_node_get_key(
- btree, node, 0));
+ nilfs_btree_node_get_key(node,
+ 0));
} else {
node = nilfs_btree_get_root(btree);
nilfs_btree_node_insert(btree, node, *keyp, *ptrp,
@@ -740,10 +692,10 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- left = nilfs_btree_get_sib_node(btree, path, level);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
- lnchildren = nilfs_btree_node_get_nchildren(btree, left);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ left = nilfs_btree_get_sib_node(path, level);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+ lnchildren = nilfs_btree_node_get_nchildren(left);
move = 0;
n = (nchildren + lnchildren + 1) / 2 - lnchildren;
@@ -764,7 +716,7 @@
unlock_buffer(path[level].bp_sib_bh);
nilfs_btree_promote_key(btree, path, level + 1,
- nilfs_btree_node_get_key(btree, node, 0));
+ nilfs_btree_node_get_key(node, 0));
if (move) {
brelse(path[level].bp_bh);
@@ -791,10 +743,10 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- right = nilfs_btree_get_sib_node(btree, path, level);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
- rnchildren = nilfs_btree_node_get_nchildren(btree, right);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ right = nilfs_btree_get_sib_node(path, level);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+ rnchildren = nilfs_btree_node_get_nchildren(right);
move = 0;
n = (nchildren + rnchildren + 1) / 2 - rnchildren;
@@ -816,15 +768,14 @@
path[level + 1].bp_index++;
nilfs_btree_promote_key(btree, path, level + 1,
- nilfs_btree_node_get_key(btree, right, 0));
+ nilfs_btree_node_get_key(right, 0));
path[level + 1].bp_index--;
if (move) {
brelse(path[level].bp_bh);
path[level].bp_bh = path[level].bp_sib_bh;
path[level].bp_sib_bh = NULL;
- path[level].bp_index -=
- nilfs_btree_node_get_nchildren(btree, node);
+ path[level].bp_index -= nilfs_btree_node_get_nchildren(node);
path[level + 1].bp_index++;
} else {
brelse(path[level].bp_sib_bh);
@@ -846,9 +797,9 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- right = nilfs_btree_get_sib_node(btree, path, level);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ right = nilfs_btree_get_sib_node(path, level);
+ nchildren = nilfs_btree_node_get_nchildren(node);
move = 0;
n = (nchildren + 1) / 2;
@@ -867,16 +818,15 @@
unlock_buffer(path[level].bp_bh);
unlock_buffer(path[level].bp_sib_bh);
- newkey = nilfs_btree_node_get_key(btree, right, 0);
+ newkey = nilfs_btree_node_get_key(right, 0);
newptr = path[level].bp_newreq.bpr_ptr;
if (move) {
- path[level].bp_index -=
- nilfs_btree_node_get_nchildren(btree, node);
+ path[level].bp_index -= nilfs_btree_node_get_nchildren(node);
nilfs_btree_node_insert(btree, right, *keyp, *ptrp,
path[level].bp_index);
- *keyp = nilfs_btree_node_get_key(btree, right, 0);
+ *keyp = nilfs_btree_node_get_key(right, 0);
*ptrp = path[level].bp_newreq.bpr_ptr;
brelse(path[level].bp_bh);
@@ -885,7 +835,7 @@
} else {
nilfs_btree_do_insert(btree, path, level, keyp, ptrp);
- *keyp = nilfs_btree_node_get_key(btree, right, 0);
+ *keyp = nilfs_btree_node_get_key(right, 0);
*ptrp = path[level].bp_newreq.bpr_ptr;
brelse(path[level].bp_sib_bh);
@@ -905,12 +855,12 @@
lock_buffer(path[level].bp_sib_bh);
root = nilfs_btree_get_root(btree);
- child = nilfs_btree_get_sib_node(btree, path, level);
+ child = nilfs_btree_get_sib_node(path, level);
- n = nilfs_btree_node_get_nchildren(btree, root);
+ n = nilfs_btree_node_get_nchildren(root);
nilfs_btree_node_move_right(btree, root, child, n);
- nilfs_btree_node_set_level(btree, root, level + 1);
+ nilfs_btree_node_set_level(root, level + 1);
if (!buffer_dirty(path[level].bp_sib_bh))
nilfs_btnode_mark_dirty(path[level].bp_sib_bh);
@@ -922,7 +872,7 @@
nilfs_btree_do_insert(btree, path, level, keyp, ptrp);
- *keyp = nilfs_btree_node_get_key(btree, child, 0);
+ *keyp = nilfs_btree_node_get_key(child, 0);
*ptrp = path[level].bp_newreq.bpr_ptr;
}
@@ -990,26 +940,29 @@
struct nilfs_btree_node *node, *parent, *sib;
__u64 sibptr;
int pindex, level, ret;
+ struct inode *dat = NULL;
stats->bs_nblocks = 0;
level = NILFS_BTREE_LEVEL_DATA;
/* allocate a new ptr for data block */
- if (NILFS_BMAP_USE_VBN(&btree->bt_bmap))
+ if (NILFS_BMAP_USE_VBN(&btree->bt_bmap)) {
path[level].bp_newreq.bpr_ptr =
nilfs_btree_find_target_v(btree, path, key);
+ dat = nilfs_bmap_get_dat(&btree->bt_bmap);
+ }
ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
- &path[level].bp_newreq);
+ &path[level].bp_newreq, dat);
if (ret < 0)
goto err_out_data;
for (level = NILFS_BTREE_LEVEL_NODE_MIN;
level < nilfs_btree_height(btree) - 1;
level++) {
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- if (nilfs_btree_node_get_nchildren(btree, node) <
- nilfs_btree_node_nchildren_max(btree, node)) {
+ node = nilfs_btree_get_nonroot_node(path, level);
+ if (nilfs_btree_node_get_nchildren(node) <
+ nilfs_btree_node_nchildren_max(node, btree)) {
path[level].bp_op = nilfs_btree_do_insert;
stats->bs_nblocks++;
goto out;
@@ -1026,8 +979,8 @@
if (ret < 0)
goto err_out_child_node;
sib = (struct nilfs_btree_node *)bh->b_data;
- if (nilfs_btree_node_get_nchildren(btree, sib) <
- nilfs_btree_node_nchildren_max(btree, sib)) {
+ if (nilfs_btree_node_get_nchildren(sib) <
+ nilfs_btree_node_nchildren_max(sib, btree)) {
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_carry_left;
stats->bs_nblocks++;
@@ -1038,15 +991,15 @@
/* right sibling */
if (pindex <
- nilfs_btree_node_get_nchildren(btree, parent) - 1) {
+ nilfs_btree_node_get_nchildren(parent) - 1) {
sibptr = nilfs_btree_node_get_ptr(btree, parent,
pindex + 1);
ret = nilfs_btree_get_block(btree, sibptr, &bh);
if (ret < 0)
goto err_out_child_node;
sib = (struct nilfs_btree_node *)bh->b_data;
- if (nilfs_btree_node_get_nchildren(btree, sib) <
- nilfs_btree_node_nchildren_max(btree, sib)) {
+ if (nilfs_btree_node_get_nchildren(sib) <
+ nilfs_btree_node_nchildren_max(sib, btree)) {
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_carry_right;
stats->bs_nblocks++;
@@ -1059,7 +1012,7 @@
path[level].bp_newreq.bpr_ptr =
path[level - 1].bp_newreq.bpr_ptr + 1;
ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
- &path[level].bp_newreq);
+ &path[level].bp_newreq, dat);
if (ret < 0)
goto err_out_child_node;
ret = nilfs_btree_get_new_block(btree,
@@ -1081,8 +1034,8 @@
/* root */
node = nilfs_btree_get_root(btree);
- if (nilfs_btree_node_get_nchildren(btree, node) <
- nilfs_btree_node_nchildren_max(btree, node)) {
+ if (nilfs_btree_node_get_nchildren(node) <
+ nilfs_btree_node_nchildren_max(node, btree)) {
path[level].bp_op = nilfs_btree_do_insert;
stats->bs_nblocks++;
goto out;
@@ -1091,7 +1044,7 @@
/* grow */
path[level].bp_newreq.bpr_ptr = path[level - 1].bp_newreq.bpr_ptr + 1;
ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
- &path[level].bp_newreq);
+ &path[level].bp_newreq, dat);
if (ret < 0)
goto err_out_child_node;
ret = nilfs_btree_get_new_block(btree, path[level].bp_newreq.bpr_ptr,
@@ -1119,16 +1072,18 @@
/* error */
err_out_curr_node:
- nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq);
+ nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq,
+ dat);
err_out_child_node:
for (level--; level > NILFS_BTREE_LEVEL_DATA; level--) {
nilfs_btnode_delete(path[level].bp_sib_bh);
nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap,
- &path[level].bp_newreq);
+ &path[level].bp_newreq, dat);
}
- nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq);
+ nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq,
+ dat);
err_out_data:
*levelp = level;
stats->bs_nblocks = 0;
@@ -1139,16 +1094,19 @@
struct nilfs_btree_path *path,
int maxlevel, __u64 key, __u64 ptr)
{
+ struct inode *dat = NULL;
int level;
set_buffer_nilfs_volatile((struct buffer_head *)((unsigned long)ptr));
ptr = path[NILFS_BTREE_LEVEL_DATA].bp_newreq.bpr_ptr;
- if (NILFS_BMAP_USE_VBN(&btree->bt_bmap))
+ if (NILFS_BMAP_USE_VBN(&btree->bt_bmap)) {
nilfs_btree_set_target_v(btree, key, ptr);
+ dat = nilfs_bmap_get_dat(&btree->bt_bmap);
+ }
for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
nilfs_bmap_commit_alloc_ptr(&btree->bt_bmap,
- &path[level - 1].bp_newreq);
+ &path[level - 1].bp_newreq, dat);
path[level].bp_op(btree, path, level, &key, &ptr);
}
@@ -1164,10 +1122,10 @@
int level, ret;
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
ret = nilfs_btree_do_lookup(btree, path, key, NULL,
NILFS_BTREE_LEVEL_NODE_MIN);
@@ -1184,8 +1142,8 @@
nilfs_bmap_add_blocks(bmap, stats.bs_nblocks);
out:
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -1197,7 +1155,7 @@
if (level < nilfs_btree_height(btree) - 1) {
lock_buffer(path[level].bp_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
+ node = nilfs_btree_get_nonroot_node(path, level);
nilfs_btree_node_delete(btree, node, keyp, ptrp,
path[level].bp_index);
if (!buffer_dirty(path[level].bp_bh))
@@ -1205,7 +1163,7 @@
unlock_buffer(path[level].bp_bh);
if (path[level].bp_index == 0)
nilfs_btree_promote_key(btree, path, level + 1,
- nilfs_btree_node_get_key(btree, node, 0));
+ nilfs_btree_node_get_key(node, 0));
} else {
node = nilfs_btree_get_root(btree);
nilfs_btree_node_delete(btree, node, keyp, ptrp,
@@ -1225,10 +1183,10 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- left = nilfs_btree_get_sib_node(btree, path, level);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
- lnchildren = nilfs_btree_node_get_nchildren(btree, left);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ left = nilfs_btree_get_sib_node(path, level);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+ lnchildren = nilfs_btree_node_get_nchildren(left);
n = (nchildren + lnchildren) / 2 - nchildren;
@@ -1243,7 +1201,7 @@
unlock_buffer(path[level].bp_sib_bh);
nilfs_btree_promote_key(btree, path, level + 1,
- nilfs_btree_node_get_key(btree, node, 0));
+ nilfs_btree_node_get_key(node, 0));
brelse(path[level].bp_sib_bh);
path[level].bp_sib_bh = NULL;
@@ -1262,10 +1220,10 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- right = nilfs_btree_get_sib_node(btree, path, level);
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
- rnchildren = nilfs_btree_node_get_nchildren(btree, right);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ right = nilfs_btree_get_sib_node(path, level);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+ rnchildren = nilfs_btree_node_get_nchildren(right);
n = (nchildren + rnchildren) / 2 - nchildren;
@@ -1281,7 +1239,7 @@
path[level + 1].bp_index++;
nilfs_btree_promote_key(btree, path, level + 1,
- nilfs_btree_node_get_key(btree, right, 0));
+ nilfs_btree_node_get_key(right, 0));
path[level + 1].bp_index--;
brelse(path[level].bp_sib_bh);
@@ -1300,10 +1258,10 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- left = nilfs_btree_get_sib_node(btree, path, level);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ left = nilfs_btree_get_sib_node(path, level);
- n = nilfs_btree_node_get_nchildren(btree, node);
+ n = nilfs_btree_node_get_nchildren(node);
nilfs_btree_node_move_left(btree, left, node, n);
@@ -1316,7 +1274,7 @@
nilfs_btnode_delete(path[level].bp_bh);
path[level].bp_bh = path[level].bp_sib_bh;
path[level].bp_sib_bh = NULL;
- path[level].bp_index += nilfs_btree_node_get_nchildren(btree, left);
+ path[level].bp_index += nilfs_btree_node_get_nchildren(left);
}
static void nilfs_btree_concat_right(struct nilfs_btree *btree,
@@ -1331,10 +1289,10 @@
lock_buffer(path[level].bp_bh);
lock_buffer(path[level].bp_sib_bh);
- node = nilfs_btree_get_nonroot_node(btree, path, level);
- right = nilfs_btree_get_sib_node(btree, path, level);
+ node = nilfs_btree_get_nonroot_node(path, level);
+ right = nilfs_btree_get_sib_node(path, level);
- n = nilfs_btree_node_get_nchildren(btree, right);
+ n = nilfs_btree_node_get_nchildren(right);
nilfs_btree_node_move_left(btree, node, right, n);
@@ -1360,11 +1318,11 @@
lock_buffer(path[level].bp_bh);
root = nilfs_btree_get_root(btree);
- child = nilfs_btree_get_nonroot_node(btree, path, level);
+ child = nilfs_btree_get_nonroot_node(path, level);
nilfs_btree_node_delete(btree, root, NULL, NULL, 0);
- nilfs_btree_node_set_level(btree, root, level);
- n = nilfs_btree_node_get_nchildren(btree, child);
+ nilfs_btree_node_set_level(root, level);
+ n = nilfs_btree_node_get_nchildren(child);
nilfs_btree_node_move_left(btree, root, child, n);
unlock_buffer(path[level].bp_bh);
@@ -1376,7 +1334,8 @@
static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
int *levelp,
- struct nilfs_bmap_stats *stats)
+ struct nilfs_bmap_stats *stats,
+ struct inode *dat)
{
struct buffer_head *bh;
struct nilfs_btree_node *node, *parent, *sib;
@@ -1388,17 +1347,17 @@
for (level = NILFS_BTREE_LEVEL_NODE_MIN;
level < nilfs_btree_height(btree) - 1;
level++) {
- node = nilfs_btree_get_nonroot_node(btree, path, level);
+ node = nilfs_btree_get_nonroot_node(path, level);
path[level].bp_oldreq.bpr_ptr =
nilfs_btree_node_get_ptr(btree, node,
path[level].bp_index);
ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
- &path[level].bp_oldreq);
+ &path[level].bp_oldreq, dat);
if (ret < 0)
goto err_out_child_node;
- if (nilfs_btree_node_get_nchildren(btree, node) >
- nilfs_btree_node_nchildren_min(btree, node)) {
+ if (nilfs_btree_node_get_nchildren(node) >
+ nilfs_btree_node_nchildren_min(node, btree)) {
path[level].bp_op = nilfs_btree_do_delete;
stats->bs_nblocks++;
goto out;
@@ -1415,8 +1374,8 @@
if (ret < 0)
goto err_out_curr_node;
sib = (struct nilfs_btree_node *)bh->b_data;
- if (nilfs_btree_node_get_nchildren(btree, sib) >
- nilfs_btree_node_nchildren_min(btree, sib)) {
+ if (nilfs_btree_node_get_nchildren(sib) >
+ nilfs_btree_node_nchildren_min(sib, btree)) {
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_borrow_left;
stats->bs_nblocks++;
@@ -1428,7 +1387,7 @@
/* continue; */
}
} else if (pindex <
- nilfs_btree_node_get_nchildren(btree, parent) - 1) {
+ nilfs_btree_node_get_nchildren(parent) - 1) {
/* right sibling */
sibptr = nilfs_btree_node_get_ptr(btree, parent,
pindex + 1);
@@ -1436,8 +1395,8 @@
if (ret < 0)
goto err_out_curr_node;
sib = (struct nilfs_btree_node *)bh->b_data;
- if (nilfs_btree_node_get_nchildren(btree, sib) >
- nilfs_btree_node_nchildren_min(btree, sib)) {
+ if (nilfs_btree_node_get_nchildren(sib) >
+ nilfs_btree_node_nchildren_min(sib, btree)) {
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_borrow_right;
stats->bs_nblocks++;
@@ -1452,7 +1411,7 @@
/* no siblings */
/* the only child of the root node */
WARN_ON(level != nilfs_btree_height(btree) - 2);
- if (nilfs_btree_node_get_nchildren(btree, node) - 1 <=
+ if (nilfs_btree_node_get_nchildren(node) - 1 <=
NILFS_BTREE_ROOT_NCHILDREN_MAX) {
path[level].bp_op = nilfs_btree_shrink;
stats->bs_nblocks += 2;
@@ -1471,7 +1430,7 @@
nilfs_btree_node_get_ptr(btree, node, path[level].bp_index);
ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
- &path[level].bp_oldreq);
+ &path[level].bp_oldreq, dat);
if (ret < 0)
goto err_out_child_node;
@@ -1486,12 +1445,12 @@
/* error */
err_out_curr_node:
- nilfs_bmap_abort_end_ptr(&btree->bt_bmap, &path[level].bp_oldreq);
+ nilfs_bmap_abort_end_ptr(&btree->bt_bmap, &path[level].bp_oldreq, dat);
err_out_child_node:
for (level--; level >= NILFS_BTREE_LEVEL_NODE_MIN; level--) {
brelse(path[level].bp_sib_bh);
nilfs_bmap_abort_end_ptr(&btree->bt_bmap,
- &path[level].bp_oldreq);
+ &path[level].bp_oldreq, dat);
}
*levelp = level;
stats->bs_nblocks = 0;
@@ -1500,13 +1459,13 @@
static void nilfs_btree_commit_delete(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int maxlevel)
+ int maxlevel, struct inode *dat)
{
int level;
for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
nilfs_bmap_commit_end_ptr(&btree->bt_bmap,
- &path[level].bp_oldreq);
+ &path[level].bp_oldreq, dat);
path[level].bp_op(btree, path, level, NULL, NULL);
}
@@ -1520,27 +1479,32 @@
struct nilfs_btree *btree;
struct nilfs_btree_path *path;
struct nilfs_bmap_stats stats;
+ struct inode *dat;
int level, ret;
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
ret = nilfs_btree_do_lookup(btree, path, key, NULL,
NILFS_BTREE_LEVEL_NODE_MIN);
if (ret < 0)
goto out;
- ret = nilfs_btree_prepare_delete(btree, path, &level, &stats);
+
+ dat = NILFS_BMAP_USE_VBN(&btree->bt_bmap) ?
+ nilfs_bmap_get_dat(&btree->bt_bmap) : NULL;
+
+ ret = nilfs_btree_prepare_delete(btree, path, &level, &stats, dat);
if (ret < 0)
goto out;
- nilfs_btree_commit_delete(btree, path, level);
+ nilfs_btree_commit_delete(btree, path, level, dat);
nilfs_bmap_sub_blocks(bmap, stats.bs_nblocks);
out:
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -1551,15 +1515,15 @@
int ret;
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
ret = nilfs_btree_do_lookup_last(btree, path, keyp, NULL);
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -1581,7 +1545,7 @@
node = root;
break;
case 3:
- nchildren = nilfs_btree_node_get_nchildren(btree, root);
+ nchildren = nilfs_btree_node_get_nchildren(root);
if (nchildren > 1)
return 0;
ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
@@ -1594,10 +1558,10 @@
return 0;
}
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
- maxkey = nilfs_btree_node_get_key(btree, node, nchildren - 1);
+ nchildren = nilfs_btree_node_get_nchildren(node);
+ maxkey = nilfs_btree_node_get_key(node, nchildren - 1);
nextmaxkey = (nchildren > 1) ?
- nilfs_btree_node_get_key(btree, node, nchildren - 2) : 0;
+ nilfs_btree_node_get_key(node, nchildren - 2) : 0;
if (bh != NULL)
brelse(bh);
@@ -1623,7 +1587,7 @@
node = root;
break;
case 3:
- nchildren = nilfs_btree_node_get_nchildren(btree, root);
+ nchildren = nilfs_btree_node_get_nchildren(root);
WARN_ON(nchildren > 1);
ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
ret = nilfs_btree_get_block(btree, ptr, &bh);
@@ -1636,11 +1600,11 @@
return -EINVAL;
}
- nchildren = nilfs_btree_node_get_nchildren(btree, node);
+ nchildren = nilfs_btree_node_get_nchildren(node);
if (nchildren < nitems)
nitems = nchildren;
- dkeys = nilfs_btree_node_dkeys(btree, node);
- dptrs = nilfs_btree_node_dptrs(btree, node);
+ dkeys = nilfs_btree_node_dkeys(node);
+ dptrs = nilfs_btree_node_dptrs(node, btree);
for (i = 0; i < nitems; i++) {
keys[i] = nilfs_bmap_dkey_to_key(dkeys[i]);
ptrs[i] = nilfs_bmap_dptr_to_ptr(dptrs[i]);
@@ -1660,18 +1624,20 @@
struct nilfs_bmap_stats *stats)
{
struct buffer_head *bh;
- struct nilfs_btree *btree;
+ struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
+ struct inode *dat = NULL;
int ret;
- btree = (struct nilfs_btree *)bmap;
stats->bs_nblocks = 0;
/* for data */
/* cannot find near ptr */
- if (NILFS_BMAP_USE_VBN(bmap))
+ if (NILFS_BMAP_USE_VBN(bmap)) {
dreq->bpr_ptr = nilfs_btree_find_target_v(btree, NULL, key);
+ dat = nilfs_bmap_get_dat(bmap);
+ }
- ret = nilfs_bmap_prepare_alloc_ptr(bmap, dreq);
+ ret = nilfs_bmap_prepare_alloc_ptr(bmap, dreq, dat);
if (ret < 0)
return ret;
@@ -1679,7 +1645,7 @@
stats->bs_nblocks++;
if (nreq != NULL) {
nreq->bpr_ptr = dreq->bpr_ptr + 1;
- ret = nilfs_bmap_prepare_alloc_ptr(bmap, nreq);
+ ret = nilfs_bmap_prepare_alloc_ptr(bmap, nreq, dat);
if (ret < 0)
goto err_out_dreq;
@@ -1696,9 +1662,9 @@
/* error */
err_out_nreq:
- nilfs_bmap_abort_alloc_ptr(bmap, nreq);
+ nilfs_bmap_abort_alloc_ptr(bmap, nreq, dat);
err_out_dreq:
- nilfs_bmap_abort_alloc_ptr(bmap, dreq);
+ nilfs_bmap_abort_alloc_ptr(bmap, dreq, dat);
stats->bs_nblocks = 0;
return ret;
@@ -1713,8 +1679,9 @@
union nilfs_bmap_ptr_req *nreq,
struct buffer_head *bh)
{
- struct nilfs_btree *btree;
+ struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
struct nilfs_btree_node *node;
+ struct inode *dat;
__u64 tmpptr;
/* free resources */
@@ -1725,11 +1692,11 @@
set_buffer_nilfs_volatile((struct buffer_head *)((unsigned long)ptr));
/* convert and insert */
- btree = (struct nilfs_btree *)bmap;
+ dat = NILFS_BMAP_USE_VBN(bmap) ? nilfs_bmap_get_dat(bmap) : NULL;
nilfs_btree_init(bmap);
if (nreq != NULL) {
- nilfs_bmap_commit_alloc_ptr(bmap, dreq);
- nilfs_bmap_commit_alloc_ptr(bmap, nreq);
+ nilfs_bmap_commit_alloc_ptr(bmap, dreq, dat);
+ nilfs_bmap_commit_alloc_ptr(bmap, nreq, dat);
/* create child node at level 1 */
lock_buffer(bh);
@@ -1751,7 +1718,7 @@
nilfs_btree_node_init(btree, node, NILFS_BTREE_NODE_ROOT,
2, 1, &keys[0], &tmpptr);
} else {
- nilfs_bmap_commit_alloc_ptr(bmap, dreq);
+ nilfs_bmap_commit_alloc_ptr(bmap, dreq, dat);
/* create root node at level 1 */
node = nilfs_btree_get_root(btree);
@@ -1822,7 +1789,7 @@
static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int level)
+ int level, struct inode *dat)
{
struct nilfs_btree_node *parent;
int ret;
@@ -1832,9 +1799,8 @@
nilfs_btree_node_get_ptr(btree, parent,
path[level + 1].bp_index);
path[level].bp_newreq.bpr_ptr = path[level].bp_oldreq.bpr_ptr + 1;
- ret = nilfs_bmap_prepare_update_v(&btree->bt_bmap,
- &path[level].bp_oldreq,
- &path[level].bp_newreq);
+ ret = nilfs_dat_prepare_update(dat, &path[level].bp_oldreq.bpr_req,
+ &path[level].bp_newreq.bpr_req);
if (ret < 0)
return ret;
@@ -1846,9 +1812,9 @@
&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
&path[level].bp_ctxt);
if (ret < 0) {
- nilfs_bmap_abort_update_v(&btree->bt_bmap,
- &path[level].bp_oldreq,
- &path[level].bp_newreq);
+ nilfs_dat_abort_update(dat,
+ &path[level].bp_oldreq.bpr_req,
+ &path[level].bp_newreq.bpr_req);
return ret;
}
}
@@ -1858,13 +1824,13 @@
static void nilfs_btree_commit_update_v(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int level)
+ int level, struct inode *dat)
{
struct nilfs_btree_node *parent;
- nilfs_bmap_commit_update_v(&btree->bt_bmap,
- &path[level].bp_oldreq,
- &path[level].bp_newreq);
+ nilfs_dat_commit_update(dat, &path[level].bp_oldreq.bpr_req,
+ &path[level].bp_newreq.bpr_req,
+ btree->bt_bmap.b_ptr_type == NILFS_BMAP_PTR_VS);
if (buffer_nilfs_node(path[level].bp_bh)) {
nilfs_btnode_commit_change_key(
@@ -1881,11 +1847,10 @@
static void nilfs_btree_abort_update_v(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int level)
+ int level, struct inode *dat)
{
- nilfs_bmap_abort_update_v(&btree->bt_bmap,
- &path[level].bp_oldreq,
- &path[level].bp_newreq);
+ nilfs_dat_abort_update(dat, &path[level].bp_oldreq.bpr_req,
+ &path[level].bp_newreq.bpr_req);
if (buffer_nilfs_node(path[level].bp_bh))
nilfs_btnode_abort_change_key(
&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
@@ -1894,14 +1859,14 @@
static int nilfs_btree_prepare_propagate_v(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int minlevel,
- int *maxlevelp)
+ int minlevel, int *maxlevelp,
+ struct inode *dat)
{
int level, ret;
level = minlevel;
if (!buffer_nilfs_volatile(path[level].bp_bh)) {
- ret = nilfs_btree_prepare_update_v(btree, path, level);
+ ret = nilfs_btree_prepare_update_v(btree, path, level, dat);
if (ret < 0)
return ret;
}
@@ -1909,7 +1874,7 @@
!buffer_dirty(path[level].bp_bh)) {
WARN_ON(buffer_nilfs_volatile(path[level].bp_bh));
- ret = nilfs_btree_prepare_update_v(btree, path, level);
+ ret = nilfs_btree_prepare_update_v(btree, path, level, dat);
if (ret < 0)
goto out;
}
@@ -1921,39 +1886,40 @@
/* error */
out:
while (--level > minlevel)
- nilfs_btree_abort_update_v(btree, path, level);
+ nilfs_btree_abort_update_v(btree, path, level, dat);
if (!buffer_nilfs_volatile(path[level].bp_bh))
- nilfs_btree_abort_update_v(btree, path, level);
+ nilfs_btree_abort_update_v(btree, path, level, dat);
return ret;
}
static void nilfs_btree_commit_propagate_v(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int minlevel,
- int maxlevel,
- struct buffer_head *bh)
+ int minlevel, int maxlevel,
+ struct buffer_head *bh,
+ struct inode *dat)
{
int level;
if (!buffer_nilfs_volatile(path[minlevel].bp_bh))
- nilfs_btree_commit_update_v(btree, path, minlevel);
+ nilfs_btree_commit_update_v(btree, path, minlevel, dat);
for (level = minlevel + 1; level <= maxlevel; level++)
- nilfs_btree_commit_update_v(btree, path, level);
+ nilfs_btree_commit_update_v(btree, path, level, dat);
}
static int nilfs_btree_propagate_v(struct nilfs_btree *btree,
struct nilfs_btree_path *path,
- int level,
- struct buffer_head *bh)
+ int level, struct buffer_head *bh)
{
int maxlevel, ret;
struct nilfs_btree_node *parent;
+ struct inode *dat = nilfs_bmap_get_dat(&btree->bt_bmap);
__u64 ptr;
get_bh(bh);
path[level].bp_bh = bh;
- ret = nilfs_btree_prepare_propagate_v(btree, path, level, &maxlevel);
+ ret = nilfs_btree_prepare_propagate_v(btree, path, level, &maxlevel,
+ dat);
if (ret < 0)
goto out;
@@ -1961,12 +1927,12 @@
parent = nilfs_btree_get_node(btree, path, level + 1);
ptr = nilfs_btree_node_get_ptr(btree, parent,
path[level + 1].bp_index);
- ret = nilfs_bmap_mark_dirty(&btree->bt_bmap, ptr);
+ ret = nilfs_dat_mark_dirty(dat, ptr);
if (ret < 0)
goto out;
}
- nilfs_btree_commit_propagate_v(btree, path, level, maxlevel, bh);
+ nilfs_btree_commit_propagate_v(btree, path, level, maxlevel, bh, dat);
out:
brelse(path[level].bp_bh);
@@ -1986,15 +1952,15 @@
WARN_ON(!buffer_dirty(bh));
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
if (buffer_nilfs_node(bh)) {
node = (struct nilfs_btree_node *)bh->b_data;
- key = nilfs_btree_node_get_key(btree, node, 0);
- level = nilfs_btree_node_get_level(btree, node);
+ key = nilfs_btree_node_get_key(node, 0);
+ level = nilfs_btree_node_get_level(node);
} else {
key = nilfs_bmap_data_get_key(bmap, bh);
level = NILFS_BTREE_LEVEL_DATA;
@@ -2013,8 +1979,8 @@
nilfs_btree_propagate_p(btree, path, level, bh);
out:
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -2022,7 +1988,7 @@
static int nilfs_btree_propagate_gc(const struct nilfs_bmap *bmap,
struct buffer_head *bh)
{
- return nilfs_bmap_mark_dirty(bmap, bh->b_blocknr);
+ return nilfs_dat_mark_dirty(nilfs_bmap_get_dat(bmap), bh->b_blocknr);
}
static void nilfs_btree_add_dirty_buffer(struct nilfs_btree *btree,
@@ -2037,12 +2003,12 @@
get_bh(bh);
node = (struct nilfs_btree_node *)bh->b_data;
- key = nilfs_btree_node_get_key(btree, node, 0);
- level = nilfs_btree_node_get_level(btree, node);
+ key = nilfs_btree_node_get_key(node, 0);
+ level = nilfs_btree_node_get_level(node);
list_for_each(head, &lists[level]) {
cbh = list_entry(head, struct buffer_head, b_assoc_buffers);
cnode = (struct nilfs_btree_node *)cbh->b_data;
- ckey = nilfs_btree_node_get_key(btree, cnode, 0);
+ ckey = nilfs_btree_node_get_key(cnode, 0);
if (key < ckey)
break;
}
@@ -2120,8 +2086,7 @@
nilfs_btree_node_set_ptr(btree, parent,
path[level + 1].bp_index, blocknr);
- key = nilfs_btree_node_get_key(btree, parent,
- path[level + 1].bp_index);
+ key = nilfs_btree_node_get_key(parent, path[level + 1].bp_index);
/* on-disk format */
binfo->bi_dat.bi_blkoff = nilfs_bmap_key_to_dkey(key);
binfo->bi_dat.bi_level = level;
@@ -2137,6 +2102,7 @@
union nilfs_binfo *binfo)
{
struct nilfs_btree_node *parent;
+ struct inode *dat = nilfs_bmap_get_dat(&btree->bt_bmap);
__u64 key;
__u64 ptr;
union nilfs_bmap_ptr_req req;
@@ -2146,12 +2112,12 @@
ptr = nilfs_btree_node_get_ptr(btree, parent,
path[level + 1].bp_index);
req.bpr_ptr = ptr;
- ret = nilfs_bmap_start_v(&btree->bt_bmap, &req, blocknr);
- if (unlikely(ret < 0))
+ ret = nilfs_dat_prepare_start(dat, &req.bpr_req);
+ if (ret < 0)
return ret;
+ nilfs_dat_commit_start(dat, &req.bpr_req, blocknr);
- key = nilfs_btree_node_get_key(btree, parent,
- path[level + 1].bp_index);
+ key = nilfs_btree_node_get_key(parent, path[level + 1].bp_index);
/* on-disk format */
binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
@@ -2171,15 +2137,15 @@
int level, ret;
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
if (buffer_nilfs_node(*bh)) {
node = (struct nilfs_btree_node *)(*bh)->b_data;
- key = nilfs_btree_node_get_key(btree, node, 0);
- level = nilfs_btree_node_get_level(btree, node);
+ key = nilfs_btree_node_get_key(node, 0);
+ level = nilfs_btree_node_get_level(node);
} else {
key = nilfs_bmap_data_get_key(bmap, *bh);
level = NILFS_BTREE_LEVEL_DATA;
@@ -2196,8 +2162,8 @@
nilfs_btree_assign_p(btree, path, level, bh, blocknr, binfo);
out:
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
@@ -2207,19 +2173,18 @@
sector_t blocknr,
union nilfs_binfo *binfo)
{
- struct nilfs_btree *btree;
struct nilfs_btree_node *node;
__u64 key;
int ret;
- btree = (struct nilfs_btree *)bmap;
- ret = nilfs_bmap_move_v(bmap, (*bh)->b_blocknr, blocknr);
+ ret = nilfs_dat_move(nilfs_bmap_get_dat(bmap), (*bh)->b_blocknr,
+ blocknr);
if (ret < 0)
return ret;
if (buffer_nilfs_node(*bh)) {
node = (struct nilfs_btree_node *)(*bh)->b_data;
- key = nilfs_btree_node_get_key(btree, node, 0);
+ key = nilfs_btree_node_get_key(node, 0);
} else
key = nilfs_bmap_data_get_key(bmap, *bh);
@@ -2239,10 +2204,10 @@
int ret;
btree = (struct nilfs_btree *)bmap;
- path = nilfs_btree_alloc_path(btree);
+ path = nilfs_btree_alloc_path();
if (path == NULL)
return -ENOMEM;
- nilfs_btree_init_path(btree, path);
+ nilfs_btree_init_path(path);
ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level + 1);
if (ret < 0) {
@@ -2262,8 +2227,8 @@
nilfs_bmap_set_dirty(&btree->bt_bmap);
out:
- nilfs_btree_clear_path(btree, path);
- nilfs_btree_free_path(btree, path);
+ nilfs_btree_release_path(path);
+ nilfs_btree_free_path(path);
return ret;
}
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index aec942c..1c6cfb5 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -815,8 +815,10 @@
void *kaddr;
int ret;
- if (cno == 0)
- return -ENOENT; /* checkpoint number 0 is invalid */
+ /* CP number is invalid if it's zero or larger than the
+ largest exist one.*/
+ if (cno == 0 || cno >= nilfs_mdt_cno(cpfile))
+ return -ENOENT;
down_read(&NILFS_MDT(cpfile)->mi_sem);
ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &bh);
@@ -824,7 +826,10 @@
goto out;
kaddr = kmap_atomic(bh->b_page, KM_USER0);
cp = nilfs_cpfile_block_get_checkpoint(cpfile, cno, bh, kaddr);
- ret = nilfs_checkpoint_snapshot(cp);
+ if (nilfs_checkpoint_invalid(cp))
+ ret = -ENOENT;
+ else
+ ret = nilfs_checkpoint_snapshot(cp);
kunmap_atomic(kaddr, KM_USER0);
brelse(bh);
diff --git a/fs/nilfs2/cpfile.h b/fs/nilfs2/cpfile.h
index 788a459..debea89 100644
--- a/fs/nilfs2/cpfile.h
+++ b/fs/nilfs2/cpfile.h
@@ -27,8 +27,6 @@
#include <linux/buffer_head.h>
#include <linux/nilfs2_fs.h>
-#define NILFS_CPFILE_GFP NILFS_MDT_GFP
-
int nilfs_cpfile_get_checkpoint(struct inode *, __u64, int,
struct nilfs_checkpoint **,
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 8927ca2..1ff8e15 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -109,12 +109,6 @@
nilfs_palloc_commit_free_entry(dat, req);
}
-void nilfs_dat_abort_free(struct inode *dat, struct nilfs_palloc_req *req)
-{
- nilfs_dat_abort_entry(dat, req);
- nilfs_palloc_abort_free_entry(dat, req);
-}
-
int nilfs_dat_prepare_start(struct inode *dat, struct nilfs_palloc_req *req)
{
int ret;
@@ -140,11 +134,6 @@
nilfs_dat_commit_entry(dat, req);
}
-void nilfs_dat_abort_start(struct inode *dat, struct nilfs_palloc_req *req)
-{
- nilfs_dat_abort_entry(dat, req);
-}
-
int nilfs_dat_prepare_end(struct inode *dat, struct nilfs_palloc_req *req)
{
struct nilfs_dat_entry *entry;
@@ -222,6 +211,37 @@
nilfs_dat_abort_entry(dat, req);
}
+int nilfs_dat_prepare_update(struct inode *dat,
+ struct nilfs_palloc_req *oldreq,
+ struct nilfs_palloc_req *newreq)
+{
+ int ret;
+
+ ret = nilfs_dat_prepare_end(dat, oldreq);
+ if (!ret) {
+ ret = nilfs_dat_prepare_alloc(dat, newreq);
+ if (ret < 0)
+ nilfs_dat_abort_end(dat, oldreq);
+ }
+ return ret;
+}
+
+void nilfs_dat_commit_update(struct inode *dat,
+ struct nilfs_palloc_req *oldreq,
+ struct nilfs_palloc_req *newreq, int dead)
+{
+ nilfs_dat_commit_end(dat, oldreq, dead);
+ nilfs_dat_commit_alloc(dat, newreq);
+}
+
+void nilfs_dat_abort_update(struct inode *dat,
+ struct nilfs_palloc_req *oldreq,
+ struct nilfs_palloc_req *newreq)
+{
+ nilfs_dat_abort_end(dat, oldreq);
+ nilfs_dat_abort_alloc(dat, newreq);
+}
+
/**
* nilfs_dat_mark_dirty -
* @dat: DAT file inode
diff --git a/fs/nilfs2/dat.h b/fs/nilfs2/dat.h
index d328b81..406070d 100644
--- a/fs/nilfs2/dat.h
+++ b/fs/nilfs2/dat.h
@@ -27,7 +27,6 @@
#include <linux/buffer_head.h>
#include <linux/fs.h>
-#define NILFS_DAT_GFP NILFS_MDT_GFP
struct nilfs_palloc_req;
@@ -39,10 +38,15 @@
int nilfs_dat_prepare_start(struct inode *, struct nilfs_palloc_req *);
void nilfs_dat_commit_start(struct inode *, struct nilfs_palloc_req *,
sector_t);
-void nilfs_dat_abort_start(struct inode *, struct nilfs_palloc_req *);
int nilfs_dat_prepare_end(struct inode *, struct nilfs_palloc_req *);
void nilfs_dat_commit_end(struct inode *, struct nilfs_palloc_req *, int);
void nilfs_dat_abort_end(struct inode *, struct nilfs_palloc_req *);
+int nilfs_dat_prepare_update(struct inode *, struct nilfs_palloc_req *,
+ struct nilfs_palloc_req *);
+void nilfs_dat_commit_update(struct inode *, struct nilfs_palloc_req *,
+ struct nilfs_palloc_req *, int);
+void nilfs_dat_abort_update(struct inode *, struct nilfs_palloc_req *,
+ struct nilfs_palloc_req *);
int nilfs_dat_mark_dirty(struct inode *, __u64);
int nilfs_dat_freev(struct inode *, __u64 *, size_t);
diff --git a/fs/nilfs2/direct.c b/fs/nilfs2/direct.c
index 342d976..d369ac7 100644
--- a/fs/nilfs2/direct.c
+++ b/fs/nilfs2/direct.c
@@ -125,106 +125,64 @@
direct->d_bmap.b_last_allocated_ptr = ptr;
}
-static int nilfs_direct_prepare_insert(struct nilfs_direct *direct,
- __u64 key,
- union nilfs_bmap_ptr_req *req,
- struct nilfs_bmap_stats *stats)
-{
- int ret;
-
- if (NILFS_BMAP_USE_VBN(&direct->d_bmap))
- req->bpr_ptr = nilfs_direct_find_target_v(direct, key);
- ret = nilfs_bmap_prepare_alloc_ptr(&direct->d_bmap, req);
- if (ret < 0)
- return ret;
-
- stats->bs_nblocks = 1;
- return 0;
-}
-
-static void nilfs_direct_commit_insert(struct nilfs_direct *direct,
- union nilfs_bmap_ptr_req *req,
- __u64 key, __u64 ptr)
-{
- struct buffer_head *bh;
-
- /* ptr must be a pointer to a buffer head. */
- bh = (struct buffer_head *)((unsigned long)ptr);
- set_buffer_nilfs_volatile(bh);
-
- nilfs_bmap_commit_alloc_ptr(&direct->d_bmap, req);
- nilfs_direct_set_ptr(direct, key, req->bpr_ptr);
-
- if (!nilfs_bmap_dirty(&direct->d_bmap))
- nilfs_bmap_set_dirty(&direct->d_bmap);
-
- if (NILFS_BMAP_USE_VBN(&direct->d_bmap))
- nilfs_direct_set_target_v(direct, key, req->bpr_ptr);
-}
-
static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
{
- struct nilfs_direct *direct;
+ struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
union nilfs_bmap_ptr_req req;
- struct nilfs_bmap_stats stats;
+ struct inode *dat = NULL;
+ struct buffer_head *bh;
int ret;
- direct = (struct nilfs_direct *)bmap;
if (key > NILFS_DIRECT_KEY_MAX)
return -ENOENT;
if (nilfs_direct_get_ptr(direct, key) != NILFS_BMAP_INVALID_PTR)
return -EEXIST;
- ret = nilfs_direct_prepare_insert(direct, key, &req, &stats);
- if (ret < 0)
- return ret;
- nilfs_direct_commit_insert(direct, &req, key, ptr);
- nilfs_bmap_add_blocks(bmap, stats.bs_nblocks);
+ if (NILFS_BMAP_USE_VBN(bmap)) {
+ req.bpr_ptr = nilfs_direct_find_target_v(direct, key);
+ dat = nilfs_bmap_get_dat(bmap);
+ }
+ ret = nilfs_bmap_prepare_alloc_ptr(bmap, &req, dat);
+ if (!ret) {
+ /* ptr must be a pointer to a buffer head. */
+ bh = (struct buffer_head *)((unsigned long)ptr);
+ set_buffer_nilfs_volatile(bh);
- return 0;
-}
+ nilfs_bmap_commit_alloc_ptr(bmap, &req, dat);
+ nilfs_direct_set_ptr(direct, key, req.bpr_ptr);
-static int nilfs_direct_prepare_delete(struct nilfs_direct *direct,
- union nilfs_bmap_ptr_req *req,
- __u64 key,
- struct nilfs_bmap_stats *stats)
-{
- int ret;
+ if (!nilfs_bmap_dirty(bmap))
+ nilfs_bmap_set_dirty(bmap);
- req->bpr_ptr = nilfs_direct_get_ptr(direct, key);
- ret = nilfs_bmap_prepare_end_ptr(&direct->d_bmap, req);
- if (!ret)
- stats->bs_nblocks = 1;
+ if (NILFS_BMAP_USE_VBN(bmap))
+ nilfs_direct_set_target_v(direct, key, req.bpr_ptr);
+
+ nilfs_bmap_add_blocks(bmap, 1);
+ }
return ret;
}
-static void nilfs_direct_commit_delete(struct nilfs_direct *direct,
- union nilfs_bmap_ptr_req *req,
- __u64 key)
-{
- nilfs_bmap_commit_end_ptr(&direct->d_bmap, req);
- nilfs_direct_set_ptr(direct, key, NILFS_BMAP_INVALID_PTR);
-}
-
static int nilfs_direct_delete(struct nilfs_bmap *bmap, __u64 key)
{
- struct nilfs_direct *direct;
+ struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
union nilfs_bmap_ptr_req req;
- struct nilfs_bmap_stats stats;
+ struct inode *dat;
int ret;
- direct = (struct nilfs_direct *)bmap;
- if ((key > NILFS_DIRECT_KEY_MAX) ||
+ if (key > NILFS_DIRECT_KEY_MAX ||
nilfs_direct_get_ptr(direct, key) == NILFS_BMAP_INVALID_PTR)
return -ENOENT;
- ret = nilfs_direct_prepare_delete(direct, &req, key, &stats);
- if (ret < 0)
- return ret;
- nilfs_direct_commit_delete(direct, &req, key);
- nilfs_bmap_sub_blocks(bmap, stats.bs_nblocks);
+ dat = NILFS_BMAP_USE_VBN(bmap) ? nilfs_bmap_get_dat(bmap) : NULL;
+ req.bpr_ptr = nilfs_direct_get_ptr(direct, key);
- return 0;
+ ret = nilfs_bmap_prepare_end_ptr(bmap, &req, dat);
+ if (!ret) {
+ nilfs_bmap_commit_end_ptr(bmap, &req, dat);
+ nilfs_direct_set_ptr(direct, key, NILFS_BMAP_INVALID_PTR);
+ nilfs_bmap_sub_blocks(bmap, 1);
+ }
+ return ret;
}
static int nilfs_direct_last_key(const struct nilfs_bmap *bmap, __u64 *keyp)
@@ -310,39 +268,36 @@
return 0;
}
-static int nilfs_direct_propagate_v(struct nilfs_direct *direct,
- struct buffer_head *bh)
-{
- union nilfs_bmap_ptr_req oldreq, newreq;
- __u64 key;
- __u64 ptr;
- int ret;
-
- key = nilfs_bmap_data_get_key(&direct->d_bmap, bh);
- ptr = nilfs_direct_get_ptr(direct, key);
- if (!buffer_nilfs_volatile(bh)) {
- oldreq.bpr_ptr = ptr;
- newreq.bpr_ptr = ptr;
- ret = nilfs_bmap_prepare_update_v(&direct->d_bmap, &oldreq,
- &newreq);
- if (ret < 0)
- return ret;
- nilfs_bmap_commit_update_v(&direct->d_bmap, &oldreq, &newreq);
- set_buffer_nilfs_volatile(bh);
- nilfs_direct_set_ptr(direct, key, newreq.bpr_ptr);
- } else
- ret = nilfs_bmap_mark_dirty(&direct->d_bmap, ptr);
-
- return ret;
-}
-
static int nilfs_direct_propagate(const struct nilfs_bmap *bmap,
struct buffer_head *bh)
{
struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
+ struct nilfs_palloc_req oldreq, newreq;
+ struct inode *dat;
+ __u64 key;
+ __u64 ptr;
+ int ret;
- return NILFS_BMAP_USE_VBN(bmap) ?
- nilfs_direct_propagate_v(direct, bh) : 0;
+ if (!NILFS_BMAP_USE_VBN(bmap))
+ return 0;
+
+ dat = nilfs_bmap_get_dat(bmap);
+ key = nilfs_bmap_data_get_key(bmap, bh);
+ ptr = nilfs_direct_get_ptr(direct, key);
+ if (!buffer_nilfs_volatile(bh)) {
+ oldreq.pr_entry_nr = ptr;
+ newreq.pr_entry_nr = ptr;
+ ret = nilfs_dat_prepare_update(dat, &oldreq, &newreq);
+ if (ret < 0)
+ return ret;
+ nilfs_dat_commit_update(dat, &oldreq, &newreq,
+ bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
+ set_buffer_nilfs_volatile(bh);
+ nilfs_direct_set_ptr(direct, key, newreq.pr_entry_nr);
+ } else
+ ret = nilfs_dat_mark_dirty(dat, ptr);
+
+ return ret;
}
static int nilfs_direct_assign_v(struct nilfs_direct *direct,
@@ -351,18 +306,18 @@
sector_t blocknr,
union nilfs_binfo *binfo)
{
+ struct inode *dat = nilfs_bmap_get_dat(&direct->d_bmap);
union nilfs_bmap_ptr_req req;
int ret;
req.bpr_ptr = ptr;
- ret = nilfs_bmap_start_v(&direct->d_bmap, &req, blocknr);
- if (unlikely(ret < 0))
- return ret;
-
- binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
- binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
-
- return 0;
+ ret = nilfs_dat_prepare_start(dat, &req.bpr_req);
+ if (!ret) {
+ nilfs_dat_commit_start(dat, &req.bpr_req, blocknr);
+ binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
+ binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
+ }
+ return ret;
}
static int nilfs_direct_assign_p(struct nilfs_direct *direct,
diff --git a/fs/nilfs2/ifile.h b/fs/nilfs2/ifile.h
index 5d30a35..ecc3ba76 100644
--- a/fs/nilfs2/ifile.h
+++ b/fs/nilfs2/ifile.h
@@ -31,7 +31,6 @@
#include "mdt.h"
#include "alloc.h"
-#define NILFS_IFILE_GFP NILFS_MDT_GFP
static inline struct nilfs_inode *
nilfs_ifile_map_inode(struct inode *ifile, ino_t ino, struct buffer_head *ibh)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index fe9d8f2..807e584 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -430,7 +430,8 @@
raw_inode = nilfs_ifile_map_inode(sbi->s_ifile, ino, bh);
- if (nilfs_read_inode_common(inode, raw_inode))
+ err = nilfs_read_inode_common(inode, raw_inode);
+ if (err)
goto failed_unmap;
if (S_ISREG(inode->i_mode)) {
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 6ea5f87..6572ea4 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -442,12 +442,6 @@
const char *msg;
int ret;
- ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
- if (ret < 0) {
- msg = "cannot read source blocks";
- goto failed;
- }
-
ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]);
if (ret < 0) {
/*
@@ -548,7 +542,25 @@
}
}
- ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+ /*
+ * nilfs_ioctl_move_blocks() will call nilfs_gc_iget(),
+ * which will operates an inode list without blocking.
+ * To protect the list from concurrent operations,
+ * nilfs_ioctl_move_blocks should be atomic operation.
+ */
+ if (test_and_set_bit(THE_NILFS_GC_RUNNING, &nilfs->ns_flags)) {
+ ret = -EBUSY;
+ goto out_free;
+ }
+
+ ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
+ if (ret < 0)
+ printk(KERN_ERR "NILFS: GC failed during preparation: "
+ "cannot read source blocks: err=%d\n", ret);
+ else
+ ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+
+ clear_nilfs_gc_running(nilfs);
out_free:
while (--n >= 0)
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 2dfd477..156bf60 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -103,15 +103,12 @@
goto failed_unlock;
err = -EEXIST;
- if (buffer_uptodate(bh) || buffer_mapped(bh))
+ if (buffer_uptodate(bh))
goto failed_bh;
-#if 0
- /* The uptodate flag is not protected by the page lock, but
- the mapped flag is. Thus, we don't have to wait the buffer. */
+
wait_on_buffer(bh);
if (buffer_uptodate(bh))
goto failed_bh;
-#endif
bh->b_bdev = nilfs->ns_bdev;
err = nilfs_mdt_insert_new_block(inode, block, bh, init_block);
@@ -139,7 +136,7 @@
int mode, struct buffer_head **out_bh)
{
struct buffer_head *bh;
- unsigned long blknum = 0;
+ __u64 blknum = 0;
int ret = -ENOMEM;
bh = nilfs_grab_buffer(inode, inode->i_mapping, blkoff, 0);
@@ -162,17 +159,15 @@
unlock_buffer(bh);
goto out;
}
- if (!buffer_mapped(bh)) { /* unused buffer */
- ret = nilfs_bmap_lookup(NILFS_I(inode)->i_bmap, blkoff,
- &blknum);
- if (unlikely(ret)) {
- unlock_buffer(bh);
- goto failed_bh;
- }
- bh->b_bdev = NILFS_MDT(inode)->mi_nilfs->ns_bdev;
- bh->b_blocknr = blknum;
- set_buffer_mapped(bh);
+
+ ret = nilfs_bmap_lookup(NILFS_I(inode)->i_bmap, blkoff, &blknum);
+ if (unlikely(ret)) {
+ unlock_buffer(bh);
+ goto failed_bh;
}
+ bh->b_bdev = NILFS_MDT(inode)->mi_nilfs->ns_bdev;
+ bh->b_blocknr = (sector_t)blknum;
+ set_buffer_mapped(bh);
bh->b_end_io = end_buffer_read_sync;
get_bh(bh);
@@ -402,6 +397,7 @@
struct inode *inode = container_of(page->mapping,
struct inode, i_data);
struct super_block *sb = inode->i_sb;
+ struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs;
struct nilfs_sb_info *writer = NULL;
int err = 0;
@@ -411,9 +407,10 @@
if (page->mapping->assoc_mapping)
return 0; /* Do not request flush for shadow page cache */
if (!sb) {
- writer = nilfs_get_writer(NILFS_MDT(inode)->mi_nilfs);
+ down_read(&nilfs->ns_writer_sem);
+ writer = nilfs->ns_writer;
if (!writer) {
- nilfs_put_writer(NILFS_MDT(inode)->mi_nilfs);
+ up_read(&nilfs->ns_writer_sem);
return -EROFS;
}
sb = writer->s_super;
@@ -425,7 +422,7 @@
nilfs_flush_segment(sb, inode->i_ino);
if (writer)
- nilfs_put_writer(NILFS_MDT(inode)->mi_nilfs);
+ up_read(&nilfs->ns_writer_sem);
return err;
}
@@ -516,9 +513,10 @@
}
struct inode *nilfs_mdt_new(struct the_nilfs *nilfs, struct super_block *sb,
- ino_t ino, gfp_t gfp_mask)
+ ino_t ino)
{
- struct inode *inode = nilfs_mdt_new_common(nilfs, sb, ino, gfp_mask);
+ struct inode *inode = nilfs_mdt_new_common(nilfs, sb, ino,
+ NILFS_MDT_GFP);
if (!inode)
return NULL;
diff --git a/fs/nilfs2/mdt.h b/fs/nilfs2/mdt.h
index df683e0..4315997 100644
--- a/fs/nilfs2/mdt.h
+++ b/fs/nilfs2/mdt.h
@@ -74,8 +74,7 @@
int nilfs_mdt_mark_block_dirty(struct inode *, unsigned long);
int nilfs_mdt_fetch_dirty(struct inode *);
-struct inode *nilfs_mdt_new(struct the_nilfs *, struct super_block *, ino_t,
- gfp_t);
+struct inode *nilfs_mdt_new(struct the_nilfs *, struct super_block *, ino_t);
struct inode *nilfs_mdt_new_common(struct the_nilfs *, struct super_block *,
ino_t, gfp_t);
void nilfs_mdt_destroy(struct inode *);
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index d80cc71..6dc8359 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -552,7 +552,8 @@
printk(KERN_WARNING
"NILFS warning: error recovering data block "
"(err=%d, ino=%lu, block-offset=%llu)\n",
- err, rb->ino, (unsigned long long)rb->blkoff);
+ err, (unsigned long)rb->ino,
+ (unsigned long long)rb->blkoff);
if (!err2)
err2 = err;
next:
diff --git a/fs/nilfs2/segbuf.c b/fs/nilfs2/segbuf.c
index 9e3fe17..e6d9e37 100644
--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -316,10 +316,10 @@
{
struct bio *bio;
- bio = bio_alloc(GFP_NOWAIT, nr_vecs);
+ bio = bio_alloc(GFP_NOIO, nr_vecs);
if (bio == NULL) {
while (!bio && (nr_vecs >>= 1))
- bio = bio_alloc(GFP_NOWAIT, nr_vecs);
+ bio = bio_alloc(GFP_NOIO, nr_vecs);
}
if (likely(bio)) {
bio->bi_bdev = sb->s_bdev;
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 51ff3d0..683df89 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2501,7 +2501,8 @@
if (test_bit(NILFS_SC_SUPER_ROOT, &sci->sc_flags) &&
nilfs_discontinued(nilfs)) {
down_write(&nilfs->ns_sem);
- req->sb_err = nilfs_commit_super(sbi, 0);
+ req->sb_err = nilfs_commit_super(sbi,
+ nilfs_altsb_need_update(nilfs));
up_write(&nilfs->ns_sem);
}
}
@@ -2689,6 +2690,7 @@
} else {
DEFINE_WAIT(wait);
int should_sleep = 1;
+ struct the_nilfs *nilfs;
prepare_to_wait(&sci->sc_wait_daemon, &wait,
TASK_INTERRUPTIBLE);
@@ -2709,6 +2711,9 @@
finish_wait(&sci->sc_wait_daemon, &wait);
timeout = ((sci->sc_state & NILFS_SEGCTOR_COMMIT) &&
time_after_eq(jiffies, sci->sc_timer->expires));
+ nilfs = sci->sc_sbi->s_nilfs;
+ if (sci->sc_super->s_dirt && nilfs_sb_need_update(nilfs))
+ set_nilfs_discontinued(nilfs);
}
goto loop;
diff --git a/fs/nilfs2/sufile.h b/fs/nilfs2/sufile.h
index a2c4d76..0e99e5c 100644
--- a/fs/nilfs2/sufile.h
+++ b/fs/nilfs2/sufile.h
@@ -28,7 +28,6 @@
#include <linux/nilfs2_fs.h>
#include "mdt.h"
-#define NILFS_SUFILE_GFP NILFS_MDT_GFP
static inline unsigned long nilfs_sufile_get_nsegments(struct inode *sufile)
{
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 151964f..55f3d6b 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -50,6 +50,8 @@
#include <linux/writeback.h>
#include <linux/kobject.h>
#include <linux/exportfs.h>
+#include <linux/seq_file.h>
+#include <linux/mount.h>
#include "nilfs.h"
#include "mdt.h"
#include "alloc.h"
@@ -65,7 +67,6 @@
"(NILFS)");
MODULE_LICENSE("GPL");
-static void nilfs_write_super(struct super_block *sb);
static int nilfs_remount(struct super_block *sb, int *flags, char *data);
/**
@@ -311,9 +312,6 @@
lock_kernel();
- if (sb->s_dirt)
- nilfs_write_super(sb);
-
nilfs_detach_segment_constructor(sbi);
if (!(sb->s_flags & MS_RDONLY)) {
@@ -336,63 +334,21 @@
unlock_kernel();
}
-/**
- * nilfs_write_super - write super block(s) of NILFS
- * @sb: super_block
- *
- * nilfs_write_super() gets a fs-dependent lock, writes super block(s), and
- * clears s_dirt. This function is called in the section protected by
- * lock_super().
- *
- * The s_dirt flag is managed by each filesystem and we protect it by ns_sem
- * of the struct the_nilfs. Lock order must be as follows:
- *
- * 1. lock_super()
- * 2. down_write(&nilfs->ns_sem)
- *
- * Inside NILFS, locking ns_sem is enough to protect s_dirt and the buffer
- * of the super block (nilfs->ns_sbp[]).
- *
- * In most cases, VFS functions call lock_super() before calling these
- * methods. So we must be careful not to bring on deadlocks when using
- * lock_super(); see generic_shutdown_super(), write_super(), and so on.
- *
- * Note that order of lock_kernel() and lock_super() depends on contexts
- * of VFS. We should also note that lock_kernel() can be used in its
- * protective section and only the outermost one has an effect.
- */
-static void nilfs_write_super(struct super_block *sb)
+static int nilfs_sync_fs(struct super_block *sb, int wait)
{
struct nilfs_sb_info *sbi = NILFS_SB(sb);
struct the_nilfs *nilfs = sbi->s_nilfs;
-
- down_write(&nilfs->ns_sem);
- if (!(sb->s_flags & MS_RDONLY)) {
- struct nilfs_super_block **sbp = nilfs->ns_sbp;
- u64 t = get_seconds();
- int dupsb;
-
- if (!nilfs_discontinued(nilfs) && t >= nilfs->ns_sbwtime[0] &&
- t < nilfs->ns_sbwtime[0] + NILFS_SB_FREQ) {
- up_write(&nilfs->ns_sem);
- return;
- }
- dupsb = sbp[1] && t > nilfs->ns_sbwtime[1] + NILFS_ALTSB_FREQ;
- nilfs_commit_super(sbi, dupsb);
- }
- sb->s_dirt = 0;
- up_write(&nilfs->ns_sem);
-}
-
-static int nilfs_sync_fs(struct super_block *sb, int wait)
-{
int err = 0;
- nilfs_write_super(sb);
-
/* This function is called when super block should be written back */
if (wait)
err = nilfs_construct_segment(sb);
+
+ down_write(&nilfs->ns_sem);
+ if (sb->s_dirt)
+ nilfs_commit_super(sbi, 1);
+ up_write(&nilfs->ns_sem);
+
return err;
}
@@ -407,8 +363,7 @@
list_add(&sbi->s_list, &nilfs->ns_supers);
up_write(&nilfs->ns_super_sem);
- sbi->s_ifile = nilfs_mdt_new(
- nilfs, sbi->s_super, NILFS_IFILE_INO, NILFS_IFILE_GFP);
+ sbi->s_ifile = nilfs_mdt_new(nilfs, sbi->s_super, NILFS_IFILE_INO);
if (!sbi->s_ifile)
return -ENOMEM;
@@ -529,6 +484,26 @@
return 0;
}
+static int nilfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct super_block *sb = vfs->mnt_sb;
+ struct nilfs_sb_info *sbi = NILFS_SB(sb);
+
+ if (!nilfs_test_opt(sbi, BARRIER))
+ seq_printf(seq, ",barrier=off");
+ if (nilfs_test_opt(sbi, SNAPSHOT))
+ seq_printf(seq, ",cp=%llu",
+ (unsigned long long int)sbi->s_snapshot_cno);
+ if (nilfs_test_opt(sbi, ERRORS_RO))
+ seq_printf(seq, ",errors=remount-ro");
+ if (nilfs_test_opt(sbi, ERRORS_PANIC))
+ seq_printf(seq, ",errors=panic");
+ if (nilfs_test_opt(sbi, STRICT_ORDER))
+ seq_printf(seq, ",order=strict");
+
+ return 0;
+}
+
static struct super_operations nilfs_sops = {
.alloc_inode = nilfs_alloc_inode,
.destroy_inode = nilfs_destroy_inode,
@@ -538,7 +513,7 @@
/* .drop_inode = nilfs_drop_inode, */
.delete_inode = nilfs_delete_inode,
.put_super = nilfs_put_super,
- .write_super = nilfs_write_super,
+ /* .write_super = nilfs_write_super, */
.sync_fs = nilfs_sync_fs,
/* .write_super_lockfs */
/* .unlockfs */
@@ -546,7 +521,7 @@
.remount_fs = nilfs_remount,
.clear_inode = nilfs_clear_inode,
/* .umount_begin */
- /* .show_options */
+ .show_options = nilfs_show_options
};
static struct inode *
@@ -816,10 +791,15 @@
if (sb->s_flags & MS_RDONLY) {
if (nilfs_test_opt(sbi, SNAPSHOT)) {
+ down_read(&nilfs->ns_segctor_sem);
err = nilfs_cpfile_is_snapshot(nilfs->ns_cpfile,
sbi->s_snapshot_cno);
- if (err < 0)
+ up_read(&nilfs->ns_segctor_sem);
+ if (err < 0) {
+ if (err == -ENOENT)
+ err = -EINVAL;
goto failed_sbi;
+ }
if (!err) {
printk(KERN_ERR
"NILFS: The specified checkpoint is "
@@ -1127,10 +1107,6 @@
*/
sd.sbi = nilfs_find_sbinfo(nilfs, !(flags & MS_RDONLY), sd.cno);
- if (!sd.cno)
- /* trying to get the latest checkpoint. */
- sd.cno = nilfs_last_cno(nilfs);
-
/*
* Get super block instance holding the nilfs_sb_info struct.
* A new instance is allocated if no existing mount is present or
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 8b88898..d4168e2 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -68,12 +68,11 @@
nilfs->ns_bdev = bdev;
atomic_set(&nilfs->ns_count, 1);
- atomic_set(&nilfs->ns_writer_refcount, -1);
atomic_set(&nilfs->ns_ndirtyblks, 0);
init_rwsem(&nilfs->ns_sem);
init_rwsem(&nilfs->ns_super_sem);
mutex_init(&nilfs->ns_mount_mutex);
- mutex_init(&nilfs->ns_writer_mutex);
+ init_rwsem(&nilfs->ns_writer_sem);
INIT_LIST_HEAD(&nilfs->ns_list);
INIT_LIST_HEAD(&nilfs->ns_supers);
spin_lock_init(&nilfs->ns_last_segment_lock);
@@ -188,23 +187,19 @@
inode_size = nilfs->ns_inode_size;
err = -ENOMEM;
- nilfs->ns_dat = nilfs_mdt_new(
- nilfs, NULL, NILFS_DAT_INO, NILFS_DAT_GFP);
+ nilfs->ns_dat = nilfs_mdt_new(nilfs, NULL, NILFS_DAT_INO);
if (unlikely(!nilfs->ns_dat))
goto failed;
- nilfs->ns_gc_dat = nilfs_mdt_new(
- nilfs, NULL, NILFS_DAT_INO, NILFS_DAT_GFP);
+ nilfs->ns_gc_dat = nilfs_mdt_new(nilfs, NULL, NILFS_DAT_INO);
if (unlikely(!nilfs->ns_gc_dat))
goto failed_dat;
- nilfs->ns_cpfile = nilfs_mdt_new(
- nilfs, NULL, NILFS_CPFILE_INO, NILFS_CPFILE_GFP);
+ nilfs->ns_cpfile = nilfs_mdt_new(nilfs, NULL, NILFS_CPFILE_INO);
if (unlikely(!nilfs->ns_cpfile))
goto failed_gc_dat;
- nilfs->ns_sufile = nilfs_mdt_new(
- nilfs, NULL, NILFS_SUFILE_INO, NILFS_SUFILE_GFP);
+ nilfs->ns_sufile = nilfs_mdt_new(nilfs, NULL, NILFS_SUFILE_INO);
if (unlikely(!nilfs->ns_sufile))
goto failed_cpfile;
diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h
index 1b9caaf..20abd55 100644
--- a/fs/nilfs2/the_nilfs.h
+++ b/fs/nilfs2/the_nilfs.h
@@ -37,6 +37,7 @@
THE_NILFS_LOADED, /* Roll-back/roll-forward has done and
the latest checkpoint was loaded */
THE_NILFS_DISCONTINUED, /* 'next' pointer chain has broken */
+ THE_NILFS_GC_RUNNING, /* gc process is running */
};
/**
@@ -50,8 +51,7 @@
* @ns_sem: semaphore for shared states
* @ns_super_sem: semaphore for global operations across super block instances
* @ns_mount_mutex: mutex protecting mount process of nilfs
- * @ns_writer_mutex: mutex protecting ns_writer attach/detach
- * @ns_writer_refcount: number of referrers on ns_writer
+ * @ns_writer_sem: semaphore protecting ns_writer attach/detach
* @ns_current: back pointer to current mount
* @ns_sbh: buffer heads of on-disk super blocks
* @ns_sbp: pointers to super block data
@@ -100,8 +100,7 @@
struct rw_semaphore ns_sem;
struct rw_semaphore ns_super_sem;
struct mutex ns_mount_mutex;
- struct mutex ns_writer_mutex;
- atomic_t ns_writer_refcount;
+ struct rw_semaphore ns_writer_sem;
/*
* components protected by ns_super_sem
@@ -197,11 +196,26 @@
THE_NILFS_FNS(INIT, init)
THE_NILFS_FNS(LOADED, loaded)
THE_NILFS_FNS(DISCONTINUED, discontinued)
+THE_NILFS_FNS(GC_RUNNING, gc_running)
/* Minimum interval of periodical update of superblocks (in seconds) */
#define NILFS_SB_FREQ 10
#define NILFS_ALTSB_FREQ 60 /* spare superblock */
+static inline int nilfs_sb_need_update(struct the_nilfs *nilfs)
+{
+ u64 t = get_seconds();
+ return t < nilfs->ns_sbwtime[0] ||
+ t > nilfs->ns_sbwtime[0] + NILFS_SB_FREQ;
+}
+
+static inline int nilfs_altsb_need_update(struct the_nilfs *nilfs)
+{
+ u64 t = get_seconds();
+ struct nilfs_super_block **sbp = nilfs->ns_sbp;
+ return sbp[1] && t > nilfs->ns_sbwtime[1] + NILFS_ALTSB_FREQ;
+}
+
void nilfs_set_last_segment(struct the_nilfs *, sector_t, u64, __u64);
struct the_nilfs *find_or_create_nilfs(struct block_device *);
void put_nilfs(struct the_nilfs *);
@@ -221,34 +235,21 @@
atomic_inc(&nilfs->ns_count);
}
-static inline struct nilfs_sb_info *nilfs_get_writer(struct the_nilfs *nilfs)
-{
- if (atomic_inc_and_test(&nilfs->ns_writer_refcount))
- mutex_lock(&nilfs->ns_writer_mutex);
- return nilfs->ns_writer;
-}
-
-static inline void nilfs_put_writer(struct the_nilfs *nilfs)
-{
- if (atomic_add_negative(-1, &nilfs->ns_writer_refcount))
- mutex_unlock(&nilfs->ns_writer_mutex);
-}
-
static inline void
nilfs_attach_writer(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
{
- mutex_lock(&nilfs->ns_writer_mutex);
+ down_write(&nilfs->ns_writer_sem);
nilfs->ns_writer = sbi;
- mutex_unlock(&nilfs->ns_writer_mutex);
+ up_write(&nilfs->ns_writer_sem);
}
static inline void
nilfs_detach_writer(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
{
- mutex_lock(&nilfs->ns_writer_mutex);
+ down_write(&nilfs->ns_writer_sem);
if (sbi == nilfs->ns_writer)
nilfs->ns_writer = NULL;
- mutex_unlock(&nilfs->ns_writer_mutex);
+ up_write(&nilfs->ns_writer_sem);
}
static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi)
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index 5dcbafe..c9ee67b 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -105,16 +105,45 @@
return send;
}
+/*
+ * This is NEVER supposed to be called. Inotify marks should either have been
+ * removed from the idr when the watch was removed or in the
+ * fsnotify_destroy_mark_by_group() call when the inotify instance was being
+ * torn down. This is only called if the idr is about to be freed but there
+ * are still marks in it.
+ */
static int idr_callback(int id, void *p, void *data)
{
- BUG();
+ struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *ientry;
+ static bool warned = false;
+
+ if (warned)
+ return 0;
+
+ warned = false;
+ entry = p;
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+
+ WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in "
+ "idr. Probably leaking memory\n", id, p, data);
+
+ /*
+ * I'm taking the liberty of assuming that the mark in question is a
+ * valid address and I'm dereferencing it. This might help to figure
+ * out why we got here and the panic is no worse than the original
+ * BUG() that was here.
+ */
+ if (entry)
+ printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n",
+ entry->group, entry->inode, ientry->wd);
return 0;
}
static void inotify_free_group_priv(struct fsnotify_group *group)
{
/* ideally the idr is empty and we won't hit the BUG in teh callback */
- idr_for_each(&group->inotify_data.idr, idr_callback, NULL);
+ idr_for_each(&group->inotify_data.idr, idr_callback, group);
idr_remove_all(&group->inotify_data.idr);
idr_destroy(&group->inotify_data.idr);
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index dc32ed8..dcd2040 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -47,9 +47,6 @@
static struct vfsmount *inotify_mnt __read_mostly;
-/* this just sits here and wastes global memory. used to just pad userspace messages with zeros */
-static struct inotify_event nul_inotify_event;
-
/* these are configurable via /proc/sys/fs/inotify/ */
static int inotify_max_user_instances __read_mostly;
static int inotify_max_queued_events __read_mostly;
@@ -157,7 +154,8 @@
event = fsnotify_peek_notify_event(group);
- event_size += roundup(event->name_len, event_size);
+ if (event->name_len)
+ event_size += roundup(event->name_len + 1, event_size);
if (event_size > count)
return ERR_PTR(-EINVAL);
@@ -183,7 +181,7 @@
struct fsnotify_event_private_data *fsn_priv;
struct inotify_event_private_data *priv;
size_t event_size = sizeof(struct inotify_event);
- size_t name_len;
+ size_t name_len = 0;
/* we get the inotify watch descriptor from the event private data */
spin_lock(&event->lock);
@@ -199,8 +197,12 @@
inotify_free_event_priv(fsn_priv);
}
- /* round up event->name_len so it is a multiple of event_size */
- name_len = roundup(event->name_len, event_size);
+ /*
+ * round up event->name_len so it is a multiple of event_size
+ * plus an extra byte for the terminating '\0'.
+ */
+ if (event->name_len)
+ name_len = roundup(event->name_len + 1, event_size);
inotify_event.len = name_len;
inotify_event.mask = inotify_mask_to_arg(event->mask);
@@ -224,8 +226,8 @@
return -EFAULT;
buf += event->name_len;
- /* fill userspace with 0's from nul_inotify_event */
- if (copy_to_user(buf, &nul_inotify_event, len_to_zero))
+ /* fill userspace with 0's */
+ if (clear_user(buf, len_to_zero))
return -EFAULT;
buf += len_to_zero;
event_size += name_len;
@@ -326,8 +328,9 @@
list_for_each_entry(holder, &group->notification_list, event_list) {
event = holder->event;
send_len += sizeof(struct inotify_event);
- send_len += roundup(event->name_len,
- sizeof(struct inotify_event));
+ if (event->name_len)
+ send_len += roundup(event->name_len + 1,
+ sizeof(struct inotify_event));
}
mutex_unlock(&group->notification_mutex);
ret = put_user(send_len, (int __user *) p);
@@ -364,20 +367,53 @@
return error;
}
+/*
+ * Remove the mark from the idr (if present) and drop the reference
+ * on the mark because it was in the idr.
+ */
static void inotify_remove_from_idr(struct fsnotify_group *group,
struct inotify_inode_mark_entry *ientry)
{
struct idr *idr;
+ struct fsnotify_mark_entry *entry;
+ struct inotify_inode_mark_entry *found_ientry;
+ int wd;
spin_lock(&group->inotify_data.idr_lock);
idr = &group->inotify_data.idr;
- idr_remove(idr, ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
+ wd = ientry->wd;
+
+ if (wd == -1)
+ goto out;
+
+ entry = idr_find(&group->inotify_data.idr, wd);
+ if (unlikely(!entry))
+ goto out;
+
+ found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
+ if (unlikely(found_ientry != ientry)) {
+ /* We found an entry in the idr with the right wd, but it's
+ * not the entry we were told to remove. eparis seriously
+ * fucked up somewhere. */
+ WARN_ON(1);
+ ientry->wd = -1;
+ goto out;
+ }
+
+ /* One ref for being in the idr, one ref held by the caller */
+ BUG_ON(atomic_read(&entry->refcnt) < 2);
+
+ idr_remove(idr, wd);
ientry->wd = -1;
+
+ /* removed from the idr, drop that ref */
+ fsnotify_put_mark(entry);
+out:
+ spin_unlock(&group->inotify_data.idr_lock);
}
+
/*
- * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
- * internal reference help on the mark because it is in the idr.
+ * Send IN_IGNORED for this wd, remove this wd from the idr.
*/
void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
struct fsnotify_group *group)
@@ -417,9 +453,6 @@
/* remove this entry from the idr */
inotify_remove_from_idr(group, ientry);
- /* removed from idr, drop that reference */
- fsnotify_put_mark(entry);
-
atomic_dec(&group->inotify_data.user->inotify_watches);
}
@@ -431,80 +464,29 @@
kmem_cache_free(inotify_inode_mark_cachep, ientry);
}
-static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+static int inotify_update_existing_watch(struct fsnotify_group *group,
+ struct inode *inode,
+ u32 arg)
{
- struct fsnotify_mark_entry *entry = NULL;
+ struct fsnotify_mark_entry *entry;
struct inotify_inode_mark_entry *ientry;
- struct inotify_inode_mark_entry *tmp_ientry;
- int ret = 0;
- int add = (arg & IN_MASK_ADD);
- __u32 mask;
__u32 old_mask, new_mask;
+ __u32 mask;
+ int add = (arg & IN_MASK_ADD);
+ int ret;
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
if (unlikely(!mask))
return -EINVAL;
- tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
- if (unlikely(!tmp_ientry))
- return -ENOMEM;
- /* we set the mask at the end after attaching it */
- fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
- tmp_ientry->wd = -1;
-
-find_entry:
spin_lock(&inode->i_lock);
entry = fsnotify_find_mark_entry(group, inode);
spin_unlock(&inode->i_lock);
- if (entry) {
- ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
- } else {
- ret = -ENOSPC;
- if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
- goto out_err;
-retry:
- ret = -ENOMEM;
- if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
- goto out_err;
+ if (!entry)
+ return -ENOENT;
- spin_lock(&group->inotify_data.idr_lock);
- ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
- group->inotify_data.last_wd,
- &tmp_ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
- if (ret) {
- if (ret == -EAGAIN)
- goto retry;
- goto out_err;
- }
-
- ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
- if (ret) {
- inotify_remove_from_idr(group, tmp_ientry);
- if (ret == -EEXIST)
- goto find_entry;
- goto out_err;
- }
-
- /* tmp_ientry has been added to the inode, so we are all set up.
- * now we just need to make sure tmp_ientry doesn't get freed and
- * we need to set up entry and ientry so the generic code can
- * do its thing. */
- ientry = tmp_ientry;
- entry = &ientry->fsn_entry;
- tmp_ientry = NULL;
-
- atomic_inc(&group->inotify_data.user->inotify_watches);
-
- /* update the idr hint */
- group->inotify_data.last_wd = ientry->wd;
-
- /* we put the mark on the idr, take a reference */
- fsnotify_get_mark(entry);
- }
-
- ret = ientry->wd;
+ ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
spin_lock(&entry->lock);
@@ -536,19 +518,108 @@
fsnotify_recalc_group_mask(group);
}
- /* this either matches fsnotify_find_mark_entry, or init_mark_entry
- * depending on which path we took... */
+ /* return the wd */
+ ret = ientry->wd;
+
+ /* match the get from fsnotify_find_mark_entry() */
fsnotify_put_mark(entry);
-out_err:
- /* could be an error, could be that we found an existing mark */
- if (tmp_ientry) {
- /* on the idr but didn't make it on the inode */
- if (tmp_ientry->wd != -1)
- inotify_remove_from_idr(group, tmp_ientry);
- kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
+ return ret;
+}
+
+static int inotify_new_watch(struct fsnotify_group *group,
+ struct inode *inode,
+ u32 arg)
+{
+ struct inotify_inode_mark_entry *tmp_ientry;
+ __u32 mask;
+ int ret;
+
+ /* don't allow invalid bits: we don't want flags set */
+ mask = inotify_arg_to_mask(arg);
+ if (unlikely(!mask))
+ return -EINVAL;
+
+ tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+ if (unlikely(!tmp_ientry))
+ return -ENOMEM;
+
+ fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+ tmp_ientry->fsn_entry.mask = mask;
+ tmp_ientry->wd = -1;
+
+ ret = -ENOSPC;
+ if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
+ goto out_err;
+retry:
+ ret = -ENOMEM;
+ if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
+ goto out_err;
+
+ spin_lock(&group->inotify_data.idr_lock);
+ ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+ group->inotify_data.last_wd,
+ &tmp_ientry->wd);
+ spin_unlock(&group->inotify_data.idr_lock);
+ if (ret) {
+ /* idr was out of memory allocate and try again */
+ if (ret == -EAGAIN)
+ goto retry;
+ goto out_err;
}
+ /* we put the mark on the idr, take a reference */
+ fsnotify_get_mark(&tmp_ientry->fsn_entry);
+
+ /* we are on the idr, now get on the inode */
+ ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+ if (ret) {
+ /* we failed to get on the inode, get off the idr */
+ inotify_remove_from_idr(group, tmp_ientry);
+ goto out_err;
+ }
+
+ /* update the idr hint, who cares about races, it's just a hint */
+ group->inotify_data.last_wd = tmp_ientry->wd;
+
+ /* increment the number of watches the user has */
+ atomic_inc(&group->inotify_data.user->inotify_watches);
+
+ /* return the watch descriptor for this new entry */
+ ret = tmp_ientry->wd;
+
+ /* match the ref from fsnotify_init_markentry() */
+ fsnotify_put_mark(&tmp_ientry->fsn_entry);
+
+ /* if this mark added a new event update the group mask */
+ if (mask & ~group->mask)
+ fsnotify_recalc_group_mask(group);
+
+out_err:
+ if (ret < 0)
+ kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
+
+ return ret;
+}
+
+static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg)
+{
+ int ret = 0;
+
+retry:
+ /* try to update and existing watch with the new arg */
+ ret = inotify_update_existing_watch(group, inode, arg);
+ /* no mark present, try to add a new one */
+ if (ret == -ENOENT)
+ ret = inotify_new_watch(group, inode, arg);
+ /*
+ * inotify_new_watch could race with another thread which did an
+ * inotify_new_watch between the update_existing and the add watch
+ * here, go back and try to update an existing mark again.
+ */
+ if (ret == -EEXIST)
+ goto retry;
+
return ret;
}
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index 3140a44..4350d499 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -2076,14 +2076,6 @@
*ppos = pos;
if (cached_page)
page_cache_release(cached_page);
- /* For now, when the user asks for O_SYNC, we actually give O_DSYNC. */
- if (likely(!status)) {
- if (unlikely((file->f_flags & O_SYNC) || IS_SYNC(vi))) {
- if (!mapping->a_ops->writepage || !is_sync_kiocb(iocb))
- status = generic_osync_inode(vi, mapping,
- OSYNC_METADATA|OSYNC_DATA);
- }
- }
pagevec_lru_add_file(&lru_pvec);
ntfs_debug("Done. Returning %s (written 0x%lx, status %li).",
written ? "written" : "status", (unsigned long)written,
@@ -2145,8 +2137,8 @@
mutex_lock(&inode->i_mutex);
ret = ntfs_file_aio_write_nolock(iocb, iov, nr_segs, &iocb->ki_pos);
mutex_unlock(&inode->i_mutex);
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- int err = sync_page_range(inode, mapping, pos, ret);
+ if (ret > 0) {
+ int err = generic_write_sync(file, pos, ret);
if (err < 0)
ret = err;
}
@@ -2173,8 +2165,8 @@
if (ret == -EIOCBQUEUED)
ret = wait_on_sync_kiocb(&kiocb);
mutex_unlock(&inode->i_mutex);
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- int err = sync_page_range(inode, mapping, *ppos - ret, ret);
+ if (ret > 0) {
+ int err = generic_write_sync(file, *ppos - ret, ret);
if (err < 0)
ret = err;
}
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 23bf684..1caa0ef 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -384,13 +384,12 @@
* it is dirty in the inode meta data rather than the data page cache of the
* inode, and thus there are no data pages that need writing out. Therefore, a
* full mark_inode_dirty() is overkill. A mark_inode_dirty_sync(), on the
- * other hand, is not sufficient, because I_DIRTY_DATASYNC needs to be set to
- * ensure ->write_inode is called from generic_osync_inode() and this needs to
- * happen or the file data would not necessarily hit the device synchronously,
- * even though the vfs inode has the O_SYNC flag set. Also, I_DIRTY_DATASYNC
- * simply "feels" better than just I_DIRTY_SYNC, since the file data has not
- * actually hit the block device yet, which is not what I_DIRTY_SYNC on its own
- * would suggest.
+ * other hand, is not sufficient, because ->write_inode needs to be called even
+ * in case of fdatasync. This needs to happen or the file data would not
+ * necessarily hit the device synchronously, even though the vfs inode has the
+ * O_SYNC flag set. Also, I_DIRTY_DATASYNC simply "feels" better than just
+ * I_DIRTY_SYNC, since the file data has not actually hit the block device yet,
+ * which is not what I_DIRTY_SYNC on its own would suggest.
*/
void __mark_mft_record_dirty(ntfs_inode *ni)
{
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index f9a3e89..ab513dd 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -6851,7 +6851,7 @@
}
status = 0;
bail:
-
+ brelse(last_eb_bh);
mlog_exit(status);
return status;
}
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index b401654..8a1e615 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -1747,8 +1747,8 @@
* we know zeros will only be needed in the first and/or last cluster.
*/
if (clusters_to_alloc || extents_to_split ||
- wc->w_desc[0].c_needs_zero ||
- wc->w_desc[wc->w_clen - 1].c_needs_zero)
+ (wc->w_clen && (wc->w_desc[0].c_needs_zero ||
+ wc->w_desc[wc->w_clen - 1].c_needs_zero)))
cluster_of_pages = 1;
else
cluster_of_pages = 0;
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index 2f28b7d..b4957c7 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -85,6 +85,17 @@
goto bail;
}
+ /*
+ * If the last lookup failed to create dentry lock, let us
+ * redo it.
+ */
+ if (!dentry->d_fsdata) {
+ mlog(0, "Inode %llu doesn't have dentry lock, "
+ "returning false\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno);
+ goto bail;
+ }
+
ret = 1;
bail:
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index 1c9efb4..02bf178 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -325,6 +325,7 @@
}
static struct backing_dev_info dlmfs_backing_dev_info = {
+ .name = "ocfs2-dlmfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index fcf879e..756f5b0 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -122,7 +122,7 @@
* that still has AST's pending... */
in_use = !list_empty(&lock->ast_list);
spin_unlock(&dlm->ast_lock);
- if (in_use) {
+ if (in_use && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
"while waiting for an ast!", res->lockname.len,
res->lockname.name);
@@ -131,7 +131,7 @@
spin_lock(&res->spinlock);
if (res->state & DLM_LOCK_RES_IN_PROGRESS) {
- if (master_node) {
+ if (master_node && !(flags & LKM_CANCEL)) {
mlog(ML_ERROR, "lockres in progress!\n");
spin_unlock(&res->spinlock);
return DLM_FORWARD;
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index aa501d3..221c5e9 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1871,8 +1871,7 @@
goto out_dio;
}
} else {
- written = generic_file_aio_write_nolock(iocb, iov, nr_segs,
- *ppos);
+ written = __generic_file_aio_write(iocb, iov, nr_segs, ppos);
}
out_dio:
@@ -1880,18 +1879,21 @@
BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) {
- /*
- * The generic write paths have handled getting data
- * to disk, but since we don't make use of the dirty
- * inode list, a manual journal commit is necessary
- * here.
- */
- if (old_size != i_size_read(inode) ||
- old_clusters != OCFS2_I(inode)->ip_clusters) {
+ ret = filemap_fdatawrite_range(file->f_mapping, pos,
+ pos + count - 1);
+ if (ret < 0)
+ written = ret;
+
+ if (!ret && (old_size != i_size_read(inode) ||
+ old_clusters != OCFS2_I(inode)->ip_clusters)) {
ret = jbd2_journal_force_commit(osb->journal->j_journal);
if (ret < 0)
written = ret;
}
+
+ if (!ret)
+ ret = filemap_fdatawait_range(file->f_mapping, pos,
+ pos + count - 1);
}
/*
@@ -1991,31 +1993,16 @@
if (ret > 0) {
unsigned long nr_pages;
+ int err;
- *ppos += ret;
nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- /*
- * If file or inode is SYNC and we actually wrote some data,
- * sync it.
- */
- if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
- int err;
+ err = generic_write_sync(out, *ppos, ret);
+ if (err)
+ ret = err;
+ else
+ *ppos += ret;
- mutex_lock(&inode->i_mutex);
- err = ocfs2_rw_lock(inode, 1);
- if (err < 0) {
- mlog_errno(err);
- } else {
- err = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
- ocfs2_rw_unlock(inode, 1);
- }
- mutex_unlock(&inode->i_mutex);
-
- if (err)
- ret = err;
- }
balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
}
diff --git a/fs/ocfs2/ocfs2_lockid.h b/fs/ocfs2/ocfs2_lockid.h
index fcdba09..c212cf5 100644
--- a/fs/ocfs2/ocfs2_lockid.h
+++ b/fs/ocfs2/ocfs2_lockid.h
@@ -108,6 +108,7 @@
[OCFS2_LOCK_TYPE_OPEN] = "Open",
[OCFS2_LOCK_TYPE_FLOCK] = "Flock",
[OCFS2_LOCK_TYPE_QINFO] = "Quota",
+ [OCFS2_LOCK_TYPE_NFS_SYNC] = "NFSSync",
[OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan",
};
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index bf7742d..44f2a5e 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -23,6 +23,7 @@
#include "sysfile.h"
#include "dlmglue.h"
#include "uptodate.h"
+#include "super.h"
#include "quota.h"
static struct workqueue_struct *ocfs2_quota_wq = NULL;
@@ -114,6 +115,15 @@
int rc = 0;
struct buffer_head *tmp = *bh;
+ if (i_size_read(inode) >> inode->i_sb->s_blocksize_bits <= v_block) {
+ ocfs2_error(inode->i_sb,
+ "Quota file %llu is probably corrupted! Requested "
+ "to read block %Lu but file has size only %Lu\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno,
+ (unsigned long long)v_block,
+ (unsigned long long)i_size_read(inode));
+ return -EIO;
+ }
rc = ocfs2_read_virt_blocks(inode, v_block, 1, &tmp, 0,
ocfs2_validate_quota_block);
if (rc)
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index b0ee0fd..a3f8871 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1218,13 +1218,17 @@
{
struct ocfs2_super *osb = OCFS2_SB(sb);
+ /* Failed mount? */
+ if (!osb || atomic_read(&osb->vol_state) == VOLUME_DISABLED)
+ goto out;
+
/* Prevent further queueing of inode drop events */
spin_lock(&dentry_list_lock);
ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED);
spin_unlock(&dentry_list_lock);
/* Wait for work to finish and/or remove it */
cancel_work_sync(&osb->dentry_lock_work);
-
+out:
kill_block_super(sb);
}
diff --git a/fs/open.c b/fs/open.c
index dd98e80..31191bf 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -199,7 +199,7 @@
int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
struct file *filp)
{
- int err;
+ int ret;
struct iattr newattrs;
/* Not pretty: "inode->i_size" shouldn't really be signed. But it is. */
@@ -214,12 +214,14 @@
}
/* Remove suid/sgid on truncate too */
- newattrs.ia_valid |= should_remove_suid(dentry);
+ ret = should_remove_suid(dentry);
+ if (ret)
+ newattrs.ia_valid |= ret | ATTR_FORCE;
mutex_lock(&dentry->d_inode->i_mutex);
- err = notify_change(dentry, &newattrs);
+ ret = notify_change(dentry, &newattrs);
mutex_unlock(&dentry->d_inode->i_mutex);
- return err;
+ return ret;
}
static long do_sys_truncate(const char __user *pathname, loff_t length)
@@ -957,6 +959,8 @@
int error;
struct file *f;
+ validate_creds(cred);
+
/*
* We must always pass in a valid mount pointer. Historically
* callers got away with not passing it, but we must enforce this at
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index 0ff7566..a7f0110 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -46,6 +46,7 @@
static const struct inode_operations ramfs_dir_inode_operations;
static struct backing_dev_info ramfs_backing_dev_info = {
+ .name = "ramfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK |
BDI_CAP_MAP_DIRECT | BDI_CAP_MAP_COPY |
diff --git a/fs/splice.c b/fs/splice.c
index 73766d2..8190237 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -976,25 +976,15 @@
if (ret > 0) {
unsigned long nr_pages;
+ int err;
- *ppos += ret;
nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- /*
- * If file or inode is SYNC and we actually wrote some data,
- * sync it.
- */
- if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
- int err;
-
- mutex_lock(&inode->i_mutex);
- err = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
- mutex_unlock(&inode->i_mutex);
-
- if (err)
- ret = err;
- }
+ err = generic_write_sync(out, *ppos, ret);
+ if (err)
+ ret = err;
+ else
+ *ppos += ret;
balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
}
diff --git a/fs/super.c b/fs/super.c
index 2761d3e..9cda337 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -62,9 +62,6 @@
s = NULL;
goto out;
}
- INIT_LIST_HEAD(&s->s_dirty);
- INIT_LIST_HEAD(&s->s_io);
- INIT_LIST_HEAD(&s->s_more_io);
INIT_LIST_HEAD(&s->s_files);
INIT_LIST_HEAD(&s->s_instances);
INIT_HLIST_HEAD(&s->s_anon);
@@ -171,7 +168,7 @@
* Drops a temporary reference, frees superblock if there's no
* references left.
*/
-static void put_super(struct super_block *sb)
+void put_super(struct super_block *sb)
{
spin_lock(&sb_lock);
__put_super(sb);
diff --git a/fs/sync.c b/fs/sync.c
index 3422ba6..1923409 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -19,20 +19,22 @@
SYNC_FILE_RANGE_WAIT_AFTER)
/*
- * Do the filesystem syncing work. For simple filesystems sync_inodes_sb(sb, 0)
- * just dirties buffers with inodes so we have to submit IO for these buffers
- * via __sync_blockdev(). This also speeds up the wait == 1 case since in that
- * case write_inode() functions do sync_dirty_buffer() and thus effectively
- * write one block at a time.
+ * Do the filesystem syncing work. For simple filesystems
+ * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
+ * submit IO for these buffers via __sync_blockdev(). This also speeds up the
+ * wait == 1 case since in that case write_inode() functions do
+ * sync_dirty_buffer() and thus effectively write one block at a time.
*/
static int __sync_filesystem(struct super_block *sb, int wait)
{
/* Avoid doing twice syncing and cache pruning for quota sync */
- if (!wait)
+ if (!wait) {
writeout_quota_sb(sb, -1);
- else
+ writeback_inodes_sb(sb);
+ } else {
sync_quota_sb(sb, -1);
- sync_inodes_sb(sb, wait);
+ sync_inodes_sb(sb);
+ }
if (sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, wait);
return __sync_blockdev(sb->s_bdev, wait);
@@ -118,7 +120,7 @@
*/
SYSCALL_DEFINE0(sync)
{
- wakeup_pdflush(0);
+ wakeup_flusher_threads(0);
sync_filesystems(0);
sync_filesystems(1);
if (unlikely(laptop_mode))
@@ -176,19 +178,23 @@
}
/**
- * vfs_fsync - perform a fsync or fdatasync on a file
+ * vfs_fsync_range - helper to sync a range of data & metadata to disk
* @file: file to sync
* @dentry: dentry of @file
- * @data: only perform a fdatasync operation
+ * @start: offset in bytes of the beginning of data range to sync
+ * @end: offset in bytes of the end of data range (inclusive)
+ * @datasync: perform only datasync
*
- * Write back data and metadata for @file to disk. If @datasync is
- * set only metadata needed to access modified file data is written.
+ * Write back data in range @start..@end and metadata for @file to disk. If
+ * @datasync is set only metadata needed to access modified file data is
+ * written.
*
* In case this function is called from nfsd @file may be %NULL and
* only @dentry is set. This can only happen when the filesystem
* implements the export_operations API.
*/
-int vfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+int vfs_fsync_range(struct file *file, struct dentry *dentry, loff_t start,
+ loff_t end, int datasync)
{
const struct file_operations *fop;
struct address_space *mapping;
@@ -212,7 +218,7 @@
goto out;
}
- ret = filemap_fdatawrite(mapping);
+ ret = filemap_write_and_wait_range(mapping, start, end);
/*
* We need to protect against concurrent writers, which could cause
@@ -223,12 +229,29 @@
if (!ret)
ret = err;
mutex_unlock(&mapping->host->i_mutex);
- err = filemap_fdatawait(mapping);
- if (!ret)
- ret = err;
+
out:
return ret;
}
+EXPORT_SYMBOL(vfs_fsync_range);
+
+/**
+ * vfs_fsync - perform a fsync or fdatasync on a file
+ * @file: file to sync
+ * @dentry: dentry of @file
+ * @datasync: only perform a fdatasync operation
+ *
+ * Write back data and metadata for @file to disk. If @datasync is
+ * set only metadata needed to access modified file data is written.
+ *
+ * In case this function is called from nfsd @file may be %NULL and
+ * only @dentry is set. This can only happen when the filesystem
+ * implements the export_operations API.
+ */
+int vfs_fsync(struct file *file, struct dentry *dentry, int datasync)
+{
+ return vfs_fsync_range(file, dentry, 0, LLONG_MAX, datasync);
+}
EXPORT_SYMBOL(vfs_fsync);
static int do_fsync(unsigned int fd, int datasync)
@@ -254,6 +277,23 @@
return do_fsync(fd, 1);
}
+/**
+ * generic_write_sync - perform syncing after a write if file / inode is sync
+ * @file: file to which the write happened
+ * @pos: offset where the write started
+ * @count: length of the write
+ *
+ * This is just a simple wrapper about our general syncing function.
+ */
+int generic_write_sync(struct file *file, loff_t pos, loff_t count)
+{
+ if (!(file->f_flags & O_SYNC) && !IS_SYNC(file->f_mapping->host))
+ return 0;
+ return vfs_fsync_range(file, file->f_path.dentry, pos,
+ pos + count - 1, 1);
+}
+EXPORT_SYMBOL(generic_write_sync);
+
/*
* sys_sync_file_range() permits finely controlled syncing over a segment of
* a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 14f2d71..0050fc4 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -760,6 +760,7 @@
const struct inode_operations sysfs_dir_inode_operations = {
.lookup = sysfs_lookup,
.setattr = sysfs_setattr,
+ .setxattr = sysfs_setxattr,
};
static void remove_dir(struct sysfs_dirent *sd)
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 555f0ff..e28cecf 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -18,6 +18,8 @@
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/xattr.h>
+#include <linux/security.h>
#include "sysfs.h"
extern struct super_block * sysfs_sb;
@@ -29,12 +31,14 @@
};
static struct backing_dev_info sysfs_backing_dev_info = {
+ .name = "sysfs",
.ra_pages = 0, /* No readahead */
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
static const struct inode_operations sysfs_inode_operations ={
.setattr = sysfs_setattr,
+ .setxattr = sysfs_setxattr,
};
int __init sysfs_inode_init(void)
@@ -42,18 +46,37 @@
return bdi_init(&sysfs_backing_dev_info);
}
+struct sysfs_inode_attrs *sysfs_init_inode_attrs(struct sysfs_dirent *sd)
+{
+ struct sysfs_inode_attrs *attrs;
+ struct iattr *iattrs;
+
+ attrs = kzalloc(sizeof(struct sysfs_inode_attrs), GFP_KERNEL);
+ if (!attrs)
+ return NULL;
+ iattrs = &attrs->ia_iattr;
+
+ /* assign default attributes */
+ iattrs->ia_mode = sd->s_mode;
+ iattrs->ia_uid = 0;
+ iattrs->ia_gid = 0;
+ iattrs->ia_atime = iattrs->ia_mtime = iattrs->ia_ctime = CURRENT_TIME;
+
+ return attrs;
+}
int sysfs_setattr(struct dentry * dentry, struct iattr * iattr)
{
struct inode * inode = dentry->d_inode;
struct sysfs_dirent * sd = dentry->d_fsdata;
- struct iattr * sd_iattr;
+ struct sysfs_inode_attrs *sd_attrs;
+ struct iattr *iattrs;
unsigned int ia_valid = iattr->ia_valid;
int error;
if (!sd)
return -EINVAL;
- sd_iattr = sd->s_iattr;
+ sd_attrs = sd->s_iattr;
error = inode_change_ok(inode, iattr);
if (error)
@@ -65,42 +88,77 @@
if (error)
return error;
- if (!sd_iattr) {
+ if (!sd_attrs) {
/* setting attributes for the first time, allocate now */
- sd_iattr = kzalloc(sizeof(struct iattr), GFP_KERNEL);
- if (!sd_iattr)
+ sd_attrs = sysfs_init_inode_attrs(sd);
+ if (!sd_attrs)
return -ENOMEM;
- /* assign default attributes */
- sd_iattr->ia_mode = sd->s_mode;
- sd_iattr->ia_uid = 0;
- sd_iattr->ia_gid = 0;
- sd_iattr->ia_atime = sd_iattr->ia_mtime = sd_iattr->ia_ctime = CURRENT_TIME;
- sd->s_iattr = sd_iattr;
+ sd->s_iattr = sd_attrs;
+ } else {
+ /* attributes were changed at least once in past */
+ iattrs = &sd_attrs->ia_iattr;
+
+ if (ia_valid & ATTR_UID)
+ iattrs->ia_uid = iattr->ia_uid;
+ if (ia_valid & ATTR_GID)
+ iattrs->ia_gid = iattr->ia_gid;
+ if (ia_valid & ATTR_ATIME)
+ iattrs->ia_atime = timespec_trunc(iattr->ia_atime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_MTIME)
+ iattrs->ia_mtime = timespec_trunc(iattr->ia_mtime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_CTIME)
+ iattrs->ia_ctime = timespec_trunc(iattr->ia_ctime,
+ inode->i_sb->s_time_gran);
+ if (ia_valid & ATTR_MODE) {
+ umode_t mode = iattr->ia_mode;
+
+ if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
+ mode &= ~S_ISGID;
+ iattrs->ia_mode = sd->s_mode = mode;
+ }
}
+ return error;
+}
- /* attributes were changed atleast once in past */
+int sysfs_setxattr(struct dentry *dentry, const char *name, const void *value,
+ size_t size, int flags)
+{
+ struct sysfs_dirent *sd = dentry->d_fsdata;
+ struct sysfs_inode_attrs *iattrs;
+ void *secdata;
+ int error;
+ u32 secdata_len = 0;
- if (ia_valid & ATTR_UID)
- sd_iattr->ia_uid = iattr->ia_uid;
- if (ia_valid & ATTR_GID)
- sd_iattr->ia_gid = iattr->ia_gid;
- if (ia_valid & ATTR_ATIME)
- sd_iattr->ia_atime = timespec_trunc(iattr->ia_atime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_MTIME)
- sd_iattr->ia_mtime = timespec_trunc(iattr->ia_mtime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_CTIME)
- sd_iattr->ia_ctime = timespec_trunc(iattr->ia_ctime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_MODE) {
- umode_t mode = iattr->ia_mode;
+ if (!sd)
+ return -EINVAL;
+ if (!sd->s_iattr)
+ sd->s_iattr = sysfs_init_inode_attrs(sd);
+ if (!sd->s_iattr)
+ return -ENOMEM;
- if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
- mode &= ~S_ISGID;
- sd_iattr->ia_mode = sd->s_mode = mode;
- }
+ iattrs = sd->s_iattr;
+ if (!strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN)) {
+ const char *suffix = name + XATTR_SECURITY_PREFIX_LEN;
+ error = security_inode_setsecurity(dentry->d_inode, suffix,
+ value, size, flags);
+ if (error)
+ goto out;
+ error = security_inode_getsecctx(dentry->d_inode,
+ &secdata, &secdata_len);
+ if (error)
+ goto out;
+ if (iattrs->ia_secdata)
+ security_release_secctx(iattrs->ia_secdata,
+ iattrs->ia_secdata_len);
+ iattrs->ia_secdata = secdata;
+ iattrs->ia_secdata_len = secdata_len;
+
+ } else
+ return -EINVAL;
+out:
return error;
}
@@ -146,6 +204,7 @@
static void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode)
{
struct bin_attribute *bin_attr;
+ struct sysfs_inode_attrs *iattrs;
inode->i_private = sysfs_get(sd);
inode->i_mapping->a_ops = &sysfs_aops;
@@ -154,16 +213,20 @@
inode->i_ino = sd->s_ino;
lockdep_set_class(&inode->i_mutex, &sysfs_inode_imutex_key);
- if (sd->s_iattr) {
+ iattrs = sd->s_iattr;
+ if (iattrs) {
/* sysfs_dirent has non-default attributes
* get them for the new inode from persistent copy
* in sysfs_dirent
*/
- set_inode_attr(inode, sd->s_iattr);
+ set_inode_attr(inode, &iattrs->ia_iattr);
+ if (iattrs->ia_secdata)
+ security_inode_notifysecctx(inode,
+ iattrs->ia_secdata,
+ iattrs->ia_secdata_len);
} else
set_default_inode_attr(inode, sd->s_mode);
-
/* initialize inode according to type */
switch (sysfs_type(sd)) {
case SYSFS_DIR:
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index 1d897ad..c5081ad 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -16,6 +16,7 @@
#include <linux/kobject.h>
#include <linux/namei.h>
#include <linux/mutex.h>
+#include <linux/security.h>
#include "sysfs.h"
@@ -209,6 +210,7 @@
}
const struct inode_operations sysfs_symlink_inode_operations = {
+ .setxattr = sysfs_setxattr,
.readlink = generic_readlink,
.follow_link = sysfs_follow_link,
.put_link = sysfs_put_link,
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 3fa0d984..af4c4e7 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -8,6 +8,8 @@
* This file is released under the GPLv2.
*/
+#include <linux/fs.h>
+
struct sysfs_open_dirent;
/* type-specific structures for sysfs_dirent->s_* union members */
@@ -31,6 +33,12 @@
struct hlist_head buffers;
};
+struct sysfs_inode_attrs {
+ struct iattr ia_iattr;
+ void *ia_secdata;
+ u32 ia_secdata_len;
+};
+
/*
* sysfs_dirent - the building block of sysfs hierarchy. Each and
* every sysfs node is represented by single sysfs_dirent.
@@ -56,7 +64,7 @@
unsigned int s_flags;
ino_t s_ino;
umode_t s_mode;
- struct iattr *s_iattr;
+ struct sysfs_inode_attrs *s_iattr;
};
#define SD_DEACTIVATED_BIAS INT_MIN
@@ -148,6 +156,8 @@
struct inode *sysfs_get_inode(struct sysfs_dirent *sd);
void sysfs_delete_inode(struct inode *inode);
int sysfs_setattr(struct dentry *dentry, struct iattr *iattr);
+int sysfs_setxattr(struct dentry *dentry, const char *name, const void *value,
+ size_t size, int flags);
int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name);
int sysfs_inode_init(void);
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index eaf6d89..1c8991b 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -65,26 +65,14 @@
static int shrink_liability(struct ubifs_info *c, int nr_to_write)
{
int nr_written;
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_NONE,
- .range_end = LLONG_MAX,
- .nr_to_write = nr_to_write,
- };
- generic_sync_sb_inodes(c->vfs_sb, &wbc);
- nr_written = nr_to_write - wbc.nr_to_write;
-
+ nr_written = writeback_inodes_sb(c->vfs_sb);
if (!nr_written) {
/*
* Re-try again but wait on pages/inodes which are being
* written-back concurrently (e.g., by pdflush).
*/
- memset(&wbc, 0, sizeof(struct writeback_control));
- wbc.sync_mode = WB_SYNC_ALL;
- wbc.range_end = LLONG_MAX;
- wbc.nr_to_write = nr_to_write;
- generic_sync_sb_inodes(c->vfs_sb, &wbc);
- nr_written = nr_to_write - wbc.nr_to_write;
+ nr_written = sync_inodes_sb(c->vfs_sb);
}
dbg_budg("%d pages were written back", nr_written);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 26d2e0d..51763aa 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -438,12 +438,6 @@
{
int i, err;
struct ubifs_info *c = sb->s_fs_info;
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .range_start = 0,
- .range_end = LLONG_MAX,
- .nr_to_write = LONG_MAX,
- };
/*
* Zero @wait is just an advisory thing to help the file system shove
@@ -462,7 +456,7 @@
* the user be able to get more accurate results of 'statfs()' after
* they synchronize the file system.
*/
- generic_sync_sb_inodes(sb, &wbc);
+ sync_inodes_sb(sb);
/*
* Synchronize write buffers, because 'ubifs_run_commit()' does not
@@ -1971,6 +1965,7 @@
*
* Read-ahead will be disabled because @c->bdi.ra_pages is 0.
*/
+ c->bdi.name = "ubifs",
c->bdi.capabilities = BDI_CAP_MAP_COPY;
c->bdi.unplug_io_fn = default_unplug_io_fn;
err = bdi_init(&c->bdi);
diff --git a/fs/udf/directory.c b/fs/udf/directory.c
index 1d2c570..2ffdb67 100644
--- a/fs/udf/directory.c
+++ b/fs/udf/directory.c
@@ -18,59 +18,6 @@
#include <linux/string.h>
#include <linux/buffer_head.h>
-#if 0
-static uint8_t *udf_filead_read(struct inode *dir, uint8_t *tmpad,
- uint8_t ad_size, struct kernel_lb_addr fe_loc,
- int *pos, int *offset, struct buffer_head **bh,
- int *error)
-{
- int loffset = *offset;
- int block;
- uint8_t *ad;
- int remainder;
-
- *error = 0;
-
- ad = (uint8_t *)(*bh)->b_data + *offset;
- *offset += ad_size;
-
- if (!ad) {
- brelse(*bh);
- *error = 1;
- return NULL;
- }
-
- if (*offset == dir->i_sb->s_blocksize) {
- brelse(*bh);
- block = udf_get_lb_pblock(dir->i_sb, fe_loc, ++*pos);
- if (!block)
- return NULL;
- *bh = udf_tread(dir->i_sb, block);
- if (!*bh)
- return NULL;
- } else if (*offset > dir->i_sb->s_blocksize) {
- ad = tmpad;
-
- remainder = dir->i_sb->s_blocksize - loffset;
- memcpy((uint8_t *)ad, (*bh)->b_data + loffset, remainder);
-
- brelse(*bh);
- block = udf_get_lb_pblock(dir->i_sb, fe_loc, ++*pos);
- if (!block)
- return NULL;
- (*bh) = udf_tread(dir->i_sb, block);
- if (!*bh)
- return NULL;
-
- memcpy((uint8_t *)ad + remainder, (*bh)->b_data,
- ad_size - remainder);
- *offset = ad_size - remainder;
- }
-
- return ad;
-}
-#endif
-
struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t *nf_pos,
struct udf_fileident_bh *fibh,
struct fileIdentDesc *cfi,
@@ -248,39 +195,6 @@
return fi;
}
-#if 0
-static struct extent_ad *udf_get_fileextent(void *buffer, int bufsize, int *offset)
-{
- struct extent_ad *ext;
- struct fileEntry *fe;
- uint8_t *ptr;
-
- if ((!buffer) || (!offset)) {
- printk(KERN_ERR "udf: udf_get_fileextent() invalidparms\n");
- return NULL;
- }
-
- fe = (struct fileEntry *)buffer;
-
- if (fe->descTag.tagIdent != cpu_to_le16(TAG_IDENT_FE)) {
- udf_debug("0x%x != TAG_IDENT_FE\n",
- le16_to_cpu(fe->descTag.tagIdent));
- return NULL;
- }
-
- ptr = (uint8_t *)(fe->extendedAttr) +
- le32_to_cpu(fe->lengthExtendedAttr);
-
- if ((*offset > 0) && (*offset < le32_to_cpu(fe->lengthAllocDescs)))
- ptr += *offset;
-
- ext = (struct extent_ad *)ptr;
-
- *offset = *offset + sizeof(struct extent_ad);
- return ext;
-}
-#endif
-
struct short_ad *udf_get_fileshortad(uint8_t *ptr, int maxoffset, uint32_t *offset,
int inc)
{
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 7464305..b80cbd7 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -193,9 +193,11 @@
static int udf_release_file(struct inode *inode, struct file *filp)
{
if (filp->f_mode & FMODE_WRITE) {
+ mutex_lock(&inode->i_mutex);
lock_kernel();
udf_discard_prealloc(inode);
unlock_kernel();
+ mutex_unlock(&inode->i_mutex);
}
return 0;
}
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index e7533f7..6d24c2c 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -90,19 +90,16 @@
}
/*
- * If we are going to release inode from memory, we discard preallocation and
- * truncate last inode extent to proper length. We could use drop_inode() but
- * it's called under inode_lock and thus we cannot mark inode dirty there. We
- * use clear_inode() but we have to make sure to write inode as it's not written
- * automatically.
+ * If we are going to release inode from memory, we truncate last inode extent
+ * to proper length. We could use drop_inode() but it's called under inode_lock
+ * and thus we cannot mark inode dirty there. We use clear_inode() but we have
+ * to make sure to write inode as it's not written automatically.
*/
void udf_clear_inode(struct inode *inode)
{
struct udf_inode_info *iinfo;
if (!(inode->i_sb->s_flags & MS_RDONLY)) {
lock_kernel();
- /* Discard preallocation for directories, symlinks, etc. */
- udf_discard_prealloc(inode);
udf_truncate_tail_extent(inode);
unlock_kernel();
write_inode_now(inode, 0);
@@ -664,8 +661,12 @@
udf_split_extents(inode, &c, offset, newblocknum, laarr, &endnum);
#ifdef UDF_PREALLOCATE
- /* preallocate blocks */
- udf_prealloc_extents(inode, c, lastblock, laarr, &endnum);
+ /* We preallocate blocks only for regular files. It also makes sense
+ * for directories but there's a problem when to drop the
+ * preallocation. We might use some delayed work for that but I feel
+ * it's overengineering for a filesystem like UDF. */
+ if (S_ISREG(inode->i_mode))
+ udf_prealloc_extents(inode, c, lastblock, laarr, &endnum);
#endif
/* merge any continuous blocks in laarr */
diff --git a/fs/udf/lowlevel.c b/fs/udf/lowlevel.c
index 1b88fd5..43e24a3 100644
--- a/fs/udf/lowlevel.c
+++ b/fs/udf/lowlevel.c
@@ -36,14 +36,10 @@
ms_info.addr_format = CDROM_LBA;
i = ioctl_by_bdev(bdev, CDROMMULTISESSION, (unsigned long)&ms_info);
-#define WE_OBEY_THE_WRITTEN_STANDARDS 1
-
if (i == 0) {
udf_debug("XA disk: %s, vol_desc_start=%d\n",
(ms_info.xa_flag ? "yes" : "no"), ms_info.addr.lba);
-#if WE_OBEY_THE_WRITTEN_STANDARDS
if (ms_info.xa_flag) /* necessary for a valid ms_info.addr */
-#endif
vol_desc_start = ms_info.addr.lba;
} else {
udf_debug("CDROMMULTISESSION not supported: rc=%d\n", i);
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index 6a29fa34..21dad8c 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -943,7 +943,6 @@
pc->componentType = 1;
pc->lengthComponentIdent = 0;
pc->componentFileVersionNum = 0;
- pc += sizeof(struct pathComponent);
elen += sizeof(struct pathComponent);
}
diff --git a/fs/xattr.c b/fs/xattr.c
index 1c3d0af..6d4f6d3 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -66,22 +66,28 @@
return inode_permission(inode, mask);
}
-int
-vfs_setxattr(struct dentry *dentry, const char *name, const void *value,
- size_t size, int flags)
+/**
+ * __vfs_setxattr_noperm - perform setxattr operation without performing
+ * permission checks.
+ *
+ * @dentry - object to perform setxattr on
+ * @name - xattr name to set
+ * @value - value to set @name to
+ * @size - size of @value
+ * @flags - flags to pass into filesystem operations
+ *
+ * returns the result of the internal setxattr or setsecurity operations.
+ *
+ * This function requires the caller to lock the inode's i_mutex before it
+ * is executed. It also assumes that the caller will make the appropriate
+ * permission checks.
+ */
+int __vfs_setxattr_noperm(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags)
{
struct inode *inode = dentry->d_inode;
- int error;
+ int error = -EOPNOTSUPP;
- error = xattr_permission(inode, name, MAY_WRITE);
- if (error)
- return error;
-
- mutex_lock(&inode->i_mutex);
- error = security_inode_setxattr(dentry, name, value, size, flags);
- if (error)
- goto out;
- error = -EOPNOTSUPP;
if (inode->i_op->setxattr) {
error = inode->i_op->setxattr(dentry, name, value, size, flags);
if (!error) {
@@ -97,6 +103,29 @@
if (!error)
fsnotify_xattr(dentry);
}
+
+ return error;
+}
+
+
+int
+vfs_setxattr(struct dentry *dentry, const char *name, const void *value,
+ size_t size, int flags)
+{
+ struct inode *inode = dentry->d_inode;
+ int error;
+
+ error = xattr_permission(inode, name, MAY_WRITE);
+ if (error)
+ return error;
+
+ mutex_lock(&inode->i_mutex);
+ error = security_inode_setxattr(dentry, name, value, size, flags);
+ if (error)
+ goto out;
+
+ error = __vfs_setxattr_noperm(dentry, name, value, size, flags);
+
out:
mutex_unlock(&inode->i_mutex);
return error;
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 0882d16..eafcc7c 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -619,7 +619,7 @@
case XFS_IOC_GETVERSION_32:
cmd = _NATIVE_IOC(cmd, long);
return xfs_file_ioctl(filp, cmd, p);
- case XFS_IOC_SWAPEXT: {
+ case XFS_IOC_SWAPEXT_32: {
struct xfs_swapext sxp;
struct compat_xfs_swapext __user *sxu = arg;
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 8070b34..6c32f1d 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -485,14 +485,6 @@
}
STATIC int
-xfs_vn_permission(
- struct inode *inode,
- int mask)
-{
- return generic_permission(inode, mask, xfs_check_acl);
-}
-
-STATIC int
xfs_vn_getattr(
struct vfsmount *mnt,
struct dentry *dentry,
@@ -696,7 +688,7 @@
}
static const struct inode_operations xfs_inode_operations = {
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.truncate = xfs_vn_truncate,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
@@ -724,7 +716,7 @@
.rmdir = xfs_vn_unlink,
.mknod = xfs_vn_mknod,
.rename = xfs_vn_rename,
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
@@ -749,7 +741,7 @@
.rmdir = xfs_vn_unlink,
.mknod = xfs_vn_mknod,
.rename = xfs_vn_rename,
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
@@ -762,7 +754,7 @@
.readlink = generic_readlink,
.follow_link = xfs_vn_follow_link,
.put_link = xfs_vn_put_link,
- .permission = xfs_vn_permission,
+ .check_acl = xfs_check_acl,
.getattr = xfs_vn_getattr,
.setattr = xfs_vn_setattr,
.setxattr = generic_setxattr,
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 7078974..fde63a3 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -817,7 +817,8 @@
xfs_iunlock(xip, iolock);
if (need_i_mutex)
mutex_unlock(&inode->i_mutex);
- error2 = sync_page_range(inode, mapping, pos, ret);
+ error2 = filemap_write_and_wait_range(mapping, pos,
+ pos + ret - 1);
if (!error)
error = error2;
if (need_i_mutex)
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index baf1e0a..740ac3a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -174,7 +174,7 @@
cpumask_var_t shared_cpu_map;
int (*acpi_processor_get_throttling) (struct acpi_processor * pr);
int (*acpi_processor_set_throttling) (struct acpi_processor * pr,
- int state);
+ int state, bool force);
u32 address;
u8 duty_offset;
@@ -321,7 +321,8 @@
/* in processor_throttling.c */
int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
-extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+extern int acpi_processor_set_throttling(struct acpi_processor *pr,
+ int state, bool force);
extern const struct file_operations acpi_processor_throttling_fops;
extern void acpi_processor_throttling_init(void);
/* in processor_idle.c */
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 290910e..96d7c98 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -3,6 +3,11 @@
header-y += kvm.h
endif
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
+header-y += kvm_para.h
+endif
+
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
$(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
diff --git a/include/asm-generic/dma-mapping-common.h b/include/asm-generic/dma-mapping-common.h
index 5406a60..e694263 100644
--- a/include/asm-generic/dma-mapping-common.h
+++ b/include/asm-generic/dma-mapping-common.h
@@ -103,7 +103,6 @@
if (ops->sync_single_for_cpu)
ops->sync_single_for_cpu(dev, addr, size, dir);
debug_dma_sync_single_for_cpu(dev, addr, size, dir);
- flush_write_buffers();
}
static inline void dma_sync_single_for_device(struct device *dev,
@@ -116,7 +115,6 @@
if (ops->sync_single_for_device)
ops->sync_single_for_device(dev, addr, size, dir);
debug_dma_sync_single_for_device(dev, addr, size, dir);
- flush_write_buffers();
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -132,7 +130,6 @@
ops->sync_single_range_for_cpu(dev, addr, offset, size, dir);
debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
- flush_write_buffers();
} else
dma_sync_single_for_cpu(dev, addr, size, dir);
}
@@ -150,7 +147,6 @@
ops->sync_single_range_for_device(dev, addr, offset, size, dir);
debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
- flush_write_buffers();
} else
dma_sync_single_for_device(dev, addr, size, dir);
}
@@ -165,7 +161,6 @@
if (ops->sync_sg_for_cpu)
ops->sync_sg_for_cpu(dev, sg, nelems, dir);
debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
- flush_write_buffers();
}
static inline void
@@ -179,7 +174,6 @@
ops->sync_sg_for_device(dev, sg, nelems, dir);
debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
- flush_write_buffers();
}
#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index aa00800..90079c3 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -81,14 +81,17 @@
#ifdef MODULE
#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_ALIGNED_SECTION ""
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#define PER_CPU_ALIGNED_SECTION ".shared_aligned"
#endif
#define PER_CPU_FIRST_SECTION ".first"
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_ALIGNED_SECTION ".shared_aligned"
#define PER_CPU_FIRST_SECTION ""
#endif
diff --git a/include/asm-generic/socket.h b/include/asm-generic/socket.h
index 5d79e40..538991c 100644
--- a/include/asm-generic/socket.h
+++ b/include/asm-generic/socket.h
@@ -60,4 +60,7 @@
#define SO_TIMESTAMPING 37
#define SCM_TIMESTAMPING SO_TIMESTAMPING
+#define SO_PROTOCOL 38
+#define SO_DOMAIN 39
+
#endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h
index 0105454..1ffb53f 100644
--- a/include/crypto/algapi.h
+++ b/include/crypto/algapi.h
@@ -22,11 +22,9 @@
struct crypto_type {
unsigned int (*ctxsize)(struct crypto_alg *alg, u32 type, u32 mask);
- unsigned int (*extsize)(struct crypto_alg *alg,
- const struct crypto_type *frontend);
+ unsigned int (*extsize)(struct crypto_alg *alg);
int (*init)(struct crypto_tfm *tfm, u32 type, u32 mask);
- int (*init_tfm)(struct crypto_tfm *tfm,
- const struct crypto_type *frontend);
+ int (*init_tfm)(struct crypto_tfm *tfm);
void (*show)(struct seq_file *m, struct crypto_alg *alg);
struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask);
@@ -52,6 +50,7 @@
struct crypto_instance *(*alloc)(struct rtattr **tb);
void (*free)(struct crypto_instance *inst);
+ int (*create)(struct crypto_template *tmpl, struct rtattr **tb);
char name[CRYPTO_MAX_ALG_NAME];
};
@@ -60,6 +59,7 @@
struct list_head list;
struct crypto_alg *alg;
struct crypto_instance *inst;
+ const struct crypto_type *frontend;
u32 mask;
};
@@ -114,11 +114,19 @@
void crypto_unregister_template(struct crypto_template *tmpl);
struct crypto_template *crypto_lookup_template(const char *name);
+int crypto_register_instance(struct crypto_template *tmpl,
+ struct crypto_instance *inst);
+
int crypto_init_spawn(struct crypto_spawn *spawn, struct crypto_alg *alg,
struct crypto_instance *inst, u32 mask);
+int crypto_init_spawn2(struct crypto_spawn *spawn, struct crypto_alg *alg,
+ struct crypto_instance *inst,
+ const struct crypto_type *frontend);
+
void crypto_drop_spawn(struct crypto_spawn *spawn);
struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
u32 mask);
+void *crypto_spawn_tfm2(struct crypto_spawn *spawn);
static inline void crypto_set_spawn(struct crypto_spawn *spawn,
struct crypto_instance *inst)
@@ -129,14 +137,26 @@
struct crypto_attr_type *crypto_get_attr_type(struct rtattr **tb);
int crypto_check_attr_type(struct rtattr **tb, u32 type);
const char *crypto_attr_alg_name(struct rtattr *rta);
-struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+struct crypto_alg *crypto_attr_alg2(struct rtattr *rta,
+ const struct crypto_type *frontend,
+ u32 type, u32 mask);
+
+static inline struct crypto_alg *crypto_attr_alg(struct rtattr *rta,
+ u32 type, u32 mask)
+{
+ return crypto_attr_alg2(rta, NULL, type, mask);
+}
+
int crypto_attr_u32(struct rtattr *rta, u32 *num);
+void *crypto_alloc_instance2(const char *name, struct crypto_alg *alg,
+ unsigned int head);
struct crypto_instance *crypto_alloc_instance(const char *name,
struct crypto_alg *alg);
void crypto_init_queue(struct crypto_queue *queue, unsigned int max_qlen);
int crypto_enqueue_request(struct crypto_queue *queue,
struct crypto_async_request *request);
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset);
struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue);
int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm);
@@ -156,12 +176,8 @@
static inline void *crypto_tfm_ctx_aligned(struct crypto_tfm *tfm)
{
- unsigned long addr = (unsigned long)crypto_tfm_ctx(tfm);
- unsigned long align = crypto_tfm_alg_alignmask(tfm);
-
- if (align <= crypto_tfm_ctx_alignment())
- align = 1;
- return (void *)ALIGN(addr, align);
+ return PTR_ALIGN(crypto_tfm_ctx(tfm),
+ crypto_tfm_alg_alignmask(tfm) + 1);
}
static inline struct crypto_instance *crypto_tfm_alg_instance(
diff --git a/include/crypto/cryptd.h b/include/crypto/cryptd.h
index 55fa7bb..2f65a6e 100644
--- a/include/crypto/cryptd.h
+++ b/include/crypto/cryptd.h
@@ -7,6 +7,7 @@
#include <linux/crypto.h>
#include <linux/kernel.h>
+#include <crypto/hash.h>
struct cryptd_ablkcipher {
struct crypto_ablkcipher base;
@@ -24,4 +25,20 @@
struct crypto_blkcipher *cryptd_ablkcipher_child(struct cryptd_ablkcipher *tfm);
void cryptd_free_ablkcipher(struct cryptd_ablkcipher *tfm);
+struct cryptd_ahash {
+ struct crypto_ahash base;
+};
+
+static inline struct cryptd_ahash *__cryptd_ahash_cast(
+ struct crypto_ahash *tfm)
+{
+ return (struct cryptd_ahash *)tfm;
+}
+
+/* alg_name should be algorithm to be cryptd-ed */
+struct cryptd_ahash *cryptd_alloc_ahash(const char *alg_name,
+ u32 type, u32 mask);
+struct crypto_shash *cryptd_ahash_child(struct cryptd_ahash *tfm);
+void cryptd_free_ahash(struct cryptd_ahash *tfm);
+
#endif
diff --git a/include/crypto/hash.h b/include/crypto/hash.h
index d56bb71..26cb1eb 100644
--- a/include/crypto/hash.h
+++ b/include/crypto/hash.h
@@ -15,6 +15,42 @@
#include <linux/crypto.h>
+struct crypto_ahash;
+
+struct hash_alg_common {
+ unsigned int digestsize;
+ unsigned int statesize;
+
+ struct crypto_alg base;
+};
+
+struct ahash_request {
+ struct crypto_async_request base;
+
+ unsigned int nbytes;
+ struct scatterlist *src;
+ u8 *result;
+
+ /* This field may only be used by the ahash API code. */
+ void *priv;
+
+ void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct ahash_alg {
+ int (*init)(struct ahash_request *req);
+ int (*update)(struct ahash_request *req);
+ int (*final)(struct ahash_request *req);
+ int (*finup)(struct ahash_request *req);
+ int (*digest)(struct ahash_request *req);
+ int (*export)(struct ahash_request *req, void *out);
+ int (*import)(struct ahash_request *req, const void *in);
+ int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+
+ struct hash_alg_common halg;
+};
+
struct shash_desc {
struct crypto_shash *tfm;
u32 flags;
@@ -24,7 +60,6 @@
struct shash_alg {
int (*init)(struct shash_desc *desc);
- int (*reinit)(struct shash_desc *desc);
int (*update)(struct shash_desc *desc, const u8 *data,
unsigned int len);
int (*final)(struct shash_desc *desc, u8 *out);
@@ -32,38 +67,48 @@
unsigned int len, u8 *out);
int (*digest)(struct shash_desc *desc, const u8 *data,
unsigned int len, u8 *out);
+ int (*export)(struct shash_desc *desc, void *out);
+ int (*import)(struct shash_desc *desc, const void *in);
int (*setkey)(struct crypto_shash *tfm, const u8 *key,
unsigned int keylen);
unsigned int descsize;
- unsigned int digestsize;
+
+ /* These fields must match hash_alg_common. */
+ unsigned int digestsize
+ __attribute__ ((aligned(__alignof__(struct hash_alg_common))));
+ unsigned int statesize;
struct crypto_alg base;
};
struct crypto_ahash {
+ int (*init)(struct ahash_request *req);
+ int (*update)(struct ahash_request *req);
+ int (*final)(struct ahash_request *req);
+ int (*finup)(struct ahash_request *req);
+ int (*digest)(struct ahash_request *req);
+ int (*export)(struct ahash_request *req, void *out);
+ int (*import)(struct ahash_request *req, const void *in);
+ int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+
+ unsigned int reqsize;
struct crypto_tfm base;
};
struct crypto_shash {
+ unsigned int descsize;
struct crypto_tfm base;
};
static inline struct crypto_ahash *__crypto_ahash_cast(struct crypto_tfm *tfm)
{
- return (struct crypto_ahash *)tfm;
+ return container_of(tfm, struct crypto_ahash, base);
}
-static inline struct crypto_ahash *crypto_alloc_ahash(const char *alg_name,
- u32 type, u32 mask)
-{
- type &= ~CRYPTO_ALG_TYPE_MASK;
- mask &= ~CRYPTO_ALG_TYPE_MASK;
- type |= CRYPTO_ALG_TYPE_AHASH;
- mask |= CRYPTO_ALG_TYPE_AHASH_MASK;
-
- return __crypto_ahash_cast(crypto_alloc_base(alg_name, type, mask));
-}
+struct crypto_ahash *crypto_alloc_ahash(const char *alg_name, u32 type,
+ u32 mask);
static inline struct crypto_tfm *crypto_ahash_tfm(struct crypto_ahash *tfm)
{
@@ -72,7 +117,7 @@
static inline void crypto_free_ahash(struct crypto_ahash *tfm)
{
- crypto_free_tfm(crypto_ahash_tfm(tfm));
+ crypto_destroy_tfm(tfm, crypto_ahash_tfm(tfm));
}
static inline unsigned int crypto_ahash_alignmask(
@@ -81,14 +126,26 @@
return crypto_tfm_alg_alignmask(crypto_ahash_tfm(tfm));
}
-static inline struct ahash_tfm *crypto_ahash_crt(struct crypto_ahash *tfm)
+static inline struct hash_alg_common *__crypto_hash_alg_common(
+ struct crypto_alg *alg)
{
- return &crypto_ahash_tfm(tfm)->crt_ahash;
+ return container_of(alg, struct hash_alg_common, base);
+}
+
+static inline struct hash_alg_common *crypto_hash_alg_common(
+ struct crypto_ahash *tfm)
+{
+ return __crypto_hash_alg_common(crypto_ahash_tfm(tfm)->__crt_alg);
}
static inline unsigned int crypto_ahash_digestsize(struct crypto_ahash *tfm)
{
- return crypto_ahash_crt(tfm)->digestsize;
+ return crypto_hash_alg_common(tfm)->digestsize;
+}
+
+static inline unsigned int crypto_ahash_statesize(struct crypto_ahash *tfm)
+{
+ return crypto_hash_alg_common(tfm)->statesize;
}
static inline u32 crypto_ahash_get_flags(struct crypto_ahash *tfm)
@@ -114,7 +171,7 @@
static inline unsigned int crypto_ahash_reqsize(struct crypto_ahash *tfm)
{
- return crypto_ahash_crt(tfm)->reqsize;
+ return tfm->reqsize;
}
static inline void *ahash_request_ctx(struct ahash_request *req)
@@ -122,44 +179,30 @@
return req->__ctx;
}
-static inline int crypto_ahash_setkey(struct crypto_ahash *tfm,
- const u8 *key, unsigned int keylen)
-{
- struct ahash_tfm *crt = crypto_ahash_crt(tfm);
+int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
+ unsigned int keylen);
+int crypto_ahash_finup(struct ahash_request *req);
+int crypto_ahash_final(struct ahash_request *req);
+int crypto_ahash_digest(struct ahash_request *req);
- return crt->setkey(tfm, key, keylen);
+static inline int crypto_ahash_export(struct ahash_request *req, void *out)
+{
+ return crypto_ahash_reqtfm(req)->export(req, out);
}
-static inline int crypto_ahash_digest(struct ahash_request *req)
+static inline int crypto_ahash_import(struct ahash_request *req, const void *in)
{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->digest(req);
+ return crypto_ahash_reqtfm(req)->import(req, in);
}
-static inline void crypto_ahash_export(struct ahash_request *req, u8 *out)
-{
- memcpy(out, ahash_request_ctx(req),
- crypto_ahash_reqsize(crypto_ahash_reqtfm(req)));
-}
-
-int crypto_ahash_import(struct ahash_request *req, const u8 *in);
-
static inline int crypto_ahash_init(struct ahash_request *req)
{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->init(req);
+ return crypto_ahash_reqtfm(req)->init(req);
}
static inline int crypto_ahash_update(struct ahash_request *req)
{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->update(req);
-}
-
-static inline int crypto_ahash_final(struct ahash_request *req)
-{
- struct ahash_tfm *crt = crypto_ahash_crt(crypto_ahash_reqtfm(req));
- return crt->final(req);
+ return crypto_ahash_reqtfm(req)->update(req);
}
static inline void ahash_request_set_tfm(struct ahash_request *req,
@@ -184,7 +227,7 @@
static inline void ahash_request_free(struct ahash_request *req)
{
- kfree(req);
+ kzfree(req);
}
static inline struct ahash_request *ahash_request_cast(
@@ -251,6 +294,11 @@
return crypto_shash_alg(tfm)->digestsize;
}
+static inline unsigned int crypto_shash_statesize(struct crypto_shash *tfm)
+{
+ return crypto_shash_alg(tfm)->statesize;
+}
+
static inline u32 crypto_shash_get_flags(struct crypto_shash *tfm)
{
return crypto_tfm_get_flags(crypto_shash_tfm(tfm));
@@ -268,7 +316,7 @@
static inline unsigned int crypto_shash_descsize(struct crypto_shash *tfm)
{
- return crypto_shash_alg(tfm)->descsize;
+ return tfm->descsize;
}
static inline void *shash_desc_ctx(struct shash_desc *desc)
@@ -281,12 +329,15 @@
int crypto_shash_digest(struct shash_desc *desc, const u8 *data,
unsigned int len, u8 *out);
-static inline void crypto_shash_export(struct shash_desc *desc, u8 *out)
+static inline int crypto_shash_export(struct shash_desc *desc, void *out)
{
- memcpy(out, shash_desc_ctx(desc), crypto_shash_descsize(desc->tfm));
+ return crypto_shash_alg(desc->tfm)->export(desc, out);
}
-int crypto_shash_import(struct shash_desc *desc, const u8 *in);
+static inline int crypto_shash_import(struct shash_desc *desc, const void *in)
+{
+ return crypto_shash_alg(desc->tfm)->import(desc, in);
+}
static inline int crypto_shash_init(struct shash_desc *desc)
{
diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h
index 82b7056..5bfad8c 100644
--- a/include/crypto/internal/hash.h
+++ b/include/crypto/internal/hash.h
@@ -34,6 +34,22 @@
unsigned int flags;
};
+struct ahash_instance {
+ struct ahash_alg alg;
+};
+
+struct shash_instance {
+ struct shash_alg alg;
+};
+
+struct crypto_ahash_spawn {
+ struct crypto_spawn base;
+};
+
+struct crypto_shash_spawn {
+ struct crypto_spawn base;
+};
+
extern const struct crypto_type crypto_ahash_type;
int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err);
@@ -43,18 +59,100 @@
struct crypto_hash_walk *walk,
struct scatterlist *sg, unsigned int len);
+static inline int crypto_hash_walk_last(struct crypto_hash_walk *walk)
+{
+ return !(walk->entrylen | walk->total);
+}
+
+int crypto_register_ahash(struct ahash_alg *alg);
+int crypto_unregister_ahash(struct ahash_alg *alg);
+int ahash_register_instance(struct crypto_template *tmpl,
+ struct ahash_instance *inst);
+void ahash_free_instance(struct crypto_instance *inst);
+
+int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
+ struct hash_alg_common *alg,
+ struct crypto_instance *inst);
+
+static inline void crypto_drop_ahash(struct crypto_ahash_spawn *spawn)
+{
+ crypto_drop_spawn(&spawn->base);
+}
+
+struct hash_alg_common *ahash_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+
int crypto_register_shash(struct shash_alg *alg);
int crypto_unregister_shash(struct shash_alg *alg);
+int shash_register_instance(struct crypto_template *tmpl,
+ struct shash_instance *inst);
+void shash_free_instance(struct crypto_instance *inst);
+
+int crypto_init_shash_spawn(struct crypto_shash_spawn *spawn,
+ struct shash_alg *alg,
+ struct crypto_instance *inst);
+
+static inline void crypto_drop_shash(struct crypto_shash_spawn *spawn)
+{
+ crypto_drop_spawn(&spawn->base);
+}
+
+struct shash_alg *shash_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+
+int shash_ahash_update(struct ahash_request *req, struct shash_desc *desc);
+int shash_ahash_finup(struct ahash_request *req, struct shash_desc *desc);
+int shash_ahash_digest(struct ahash_request *req, struct shash_desc *desc);
+
+int crypto_init_shash_ops_async(struct crypto_tfm *tfm);
static inline void *crypto_ahash_ctx(struct crypto_ahash *tfm)
{
- return crypto_tfm_ctx(&tfm->base);
+ return crypto_tfm_ctx(crypto_ahash_tfm(tfm));
}
-static inline struct ahash_alg *crypto_ahash_alg(
- struct crypto_ahash *tfm)
+static inline struct ahash_alg *__crypto_ahash_alg(struct crypto_alg *alg)
{
- return &crypto_ahash_tfm(tfm)->__crt_alg->cra_ahash;
+ return container_of(__crypto_hash_alg_common(alg), struct ahash_alg,
+ halg);
+}
+
+static inline void crypto_ahash_set_reqsize(struct crypto_ahash *tfm,
+ unsigned int reqsize)
+{
+ tfm->reqsize = reqsize;
+}
+
+static inline struct crypto_instance *ahash_crypto_instance(
+ struct ahash_instance *inst)
+{
+ return container_of(&inst->alg.halg.base, struct crypto_instance, alg);
+}
+
+static inline struct ahash_instance *ahash_instance(
+ struct crypto_instance *inst)
+{
+ return container_of(&inst->alg, struct ahash_instance, alg.halg.base);
+}
+
+static inline void *ahash_instance_ctx(struct ahash_instance *inst)
+{
+ return crypto_instance_ctx(ahash_crypto_instance(inst));
+}
+
+static inline unsigned int ahash_instance_headroom(void)
+{
+ return sizeof(struct ahash_alg) - sizeof(struct crypto_alg);
+}
+
+static inline struct ahash_instance *ahash_alloc_instance(
+ const char *name, struct crypto_alg *alg)
+{
+ return crypto_alloc_instance2(name, alg, ahash_instance_headroom());
+}
+
+static inline struct crypto_ahash *crypto_spawn_ahash(
+ struct crypto_ahash_spawn *spawn)
+{
+ return crypto_spawn_tfm2(&spawn->base);
}
static inline int ahash_enqueue_request(struct crypto_queue *queue,
@@ -80,5 +178,46 @@
return crypto_tfm_ctx(&tfm->base);
}
+static inline struct crypto_instance *shash_crypto_instance(
+ struct shash_instance *inst)
+{
+ return container_of(&inst->alg.base, struct crypto_instance, alg);
+}
+
+static inline struct shash_instance *shash_instance(
+ struct crypto_instance *inst)
+{
+ return container_of(__crypto_shash_alg(&inst->alg),
+ struct shash_instance, alg);
+}
+
+static inline void *shash_instance_ctx(struct shash_instance *inst)
+{
+ return crypto_instance_ctx(shash_crypto_instance(inst));
+}
+
+static inline struct shash_instance *shash_alloc_instance(
+ const char *name, struct crypto_alg *alg)
+{
+ return crypto_alloc_instance2(name, alg,
+ sizeof(struct shash_alg) - sizeof(*alg));
+}
+
+static inline struct crypto_shash *crypto_spawn_shash(
+ struct crypto_shash_spawn *spawn)
+{
+ return crypto_spawn_tfm2(&spawn->base);
+}
+
+static inline void *crypto_shash_ctx_aligned(struct crypto_shash *tfm)
+{
+ return crypto_tfm_ctx_aligned(&tfm->base);
+}
+
+static inline struct crypto_shash *__crypto_shash_cast(struct crypto_tfm *tfm)
+{
+ return container_of(tfm, struct crypto_shash, base);
+}
+
#endif /* _CRYPTO_INTERNAL_HASH_H */
diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h
index 2ba42cd..3a748a6 100644
--- a/include/crypto/internal/skcipher.h
+++ b/include/crypto/internal/skcipher.h
@@ -79,8 +79,8 @@
static inline struct skcipher_givcrypt_request *skcipher_dequeue_givcrypt(
struct crypto_queue *queue)
{
- return container_of(ablkcipher_dequeue_request(queue),
- struct skcipher_givcrypt_request, creq);
+ return __crypto_dequeue_request(
+ queue, offsetof(struct skcipher_givcrypt_request, creq.base));
}
static inline void *skcipher_givcrypt_reqctx(
diff --git a/include/crypto/sha.h b/include/crypto/sha.h
index c0ccc2b..069e85b 100644
--- a/include/crypto/sha.h
+++ b/include/crypto/sha.h
@@ -5,6 +5,8 @@
#ifndef _CRYPTO_SHA_H
#define _CRYPTO_SHA_H
+#include <linux/types.h>
+
#define SHA1_DIGEST_SIZE 20
#define SHA1_BLOCK_SIZE 64
@@ -62,4 +64,22 @@
#define SHA512_H6 0x1f83d9abfb41bd6bULL
#define SHA512_H7 0x5be0cd19137e2179ULL
+struct sha1_state {
+ u64 count;
+ u32 state[SHA1_DIGEST_SIZE / 4];
+ u8 buffer[SHA1_BLOCK_SIZE];
+};
+
+struct sha256_state {
+ u64 count;
+ u32 state[SHA256_DIGEST_SIZE / 4];
+ u8 buf[SHA256_BLOCK_SIZE];
+};
+
+struct sha512_state {
+ u64 count[2];
+ u64 state[SHA512_DIGEST_SIZE / 8];
+ u8 buf[SHA512_BLOCK_SIZE];
+};
+
#endif
diff --git a/include/crypto/vmac.h b/include/crypto/vmac.h
new file mode 100644
index 0000000..c4467c5
--- /dev/null
+++ b/include/crypto/vmac.h
@@ -0,0 +1,61 @@
+/*
+ * Modified to interface to the Linux kernel
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef __CRYPTO_VMAC_H
+#define __CRYPTO_VMAC_H
+
+/* --------------------------------------------------------------------------
+ * VMAC and VHASH Implementation by Ted Krovetz (tdk@acm.org) and Wei Dai.
+ * This implementation is herby placed in the public domain.
+ * The authors offers no warranty. Use at your own risk.
+ * Please send bug reports to the authors.
+ * Last modified: 17 APR 08, 1700 PDT
+ * ----------------------------------------------------------------------- */
+
+/*
+ * User definable settings.
+ */
+#define VMAC_TAG_LEN 64
+#define VMAC_KEY_SIZE 128/* Must be 128, 192 or 256 */
+#define VMAC_KEY_LEN (VMAC_KEY_SIZE/8)
+#define VMAC_NHBYTES 128/* Must 2^i for any 3 < i < 13 Standard = 128*/
+
+/*
+ * This implementation uses u32 and u64 as names for unsigned 32-
+ * and 64-bit integer types. These are defined in C99 stdint.h. The
+ * following may need adaptation if you are not running a C99 or
+ * Microsoft C environment.
+ */
+struct vmac_ctx {
+ u64 nhkey[(VMAC_NHBYTES/8)+2*(VMAC_TAG_LEN/64-1)];
+ u64 polykey[2*VMAC_TAG_LEN/64];
+ u64 l3key[2*VMAC_TAG_LEN/64];
+ u64 polytmp[2*VMAC_TAG_LEN/64];
+ u64 cached_nonce[2];
+ u64 cached_aes[2];
+ int first_block_processed;
+};
+
+typedef u64 vmac_t;
+
+struct vmac_ctx_t {
+ struct crypto_cipher *child;
+ struct vmac_ctx __vmac_ctx;
+};
+
+#endif /* __CRYPTO_VMAC_H */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 334a359..cff4a10 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -268,6 +268,10 @@
$(srctree)/include/asm-$(SRCARCH)/kvm.h),)
unifdef-y += kvm.h
endif
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
+unifdef-y += kvm_para.h
+endif
unifdef-y += llc.h
unifdef-y += loop.h
unifdef-y += lp.h
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9b93caf..ab94335 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -36,6 +36,11 @@
struct amba_id *id_table;
};
+enum amba_vendor {
+ AMBA_VENDOR_ARM = 0x41,
+ AMBA_VENDOR_ST = 0x80,
+};
+
#define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
new file mode 100644
index 0000000..2983e36
--- /dev/null
+++ b/include/linux/amba/pl093.h
@@ -0,0 +1,80 @@
+/* linux/amba/pl093.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * AMBA PL093 SSMC (synchronous static memory controller)
+ * See DDI0236.pdf (r0p4) for more details
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define SMB_BANK(x) ((x) * 0x20) /* each bank control set is 0x20 apart */
+
+/* Offsets for SMBxxxxRy registers */
+
+#define SMBIDCYR (0x00)
+#define SMBWSTRDR (0x04)
+#define SMBWSTWRR (0x08)
+#define SMBWSTOENR (0x0C)
+#define SMBWSTWENR (0x10)
+#define SMBCR (0x14)
+#define SMBSR (0x18)
+#define SMBWSTBRDR (0x1C)
+
+/* Masks for SMB registers */
+#define IDCY_MASK (0xf)
+#define WSTRD_MASK (0xf)
+#define WSTWR_MASK (0xf)
+#define WSTOEN_MASK (0xf)
+#define WSTWEN_MASK (0xf)
+
+/* Notes from datasheet:
+ * WSTOEN <= WSTRD
+ * WSTWEN <= WSTWR
+ *
+ * WSTOEN is not used with nWAIT
+ */
+
+/* SMBCR bit definitions */
+#define SMBCR_BIWRITEEN (1 << 21)
+#define SMBCR_ADDRVALIDWRITEEN (1 << 20)
+#define SMBCR_SYNCWRITE (1 << 17)
+#define SMBCR_BMWRITE (1 << 16)
+#define SMBCR_WRAPREAD (1 << 14)
+#define SMBCR_BIREADEN (1 << 13)
+#define SMBCR_ADDRVALIDREADEN (1 << 12)
+#define SMBCR_SYNCREAD (1 << 9)
+#define SMBCR_BMREAD (1 << 8)
+#define SMBCR_SMBLSPOL (1 << 6)
+#define SMBCR_WP (1 << 3)
+#define SMBCR_WAITEN (1 << 2)
+#define SMBCR_WAITPOL (1 << 1)
+#define SMBCR_RBLE (1 << 0)
+
+#define SMBCR_BURSTLENWRITE_MASK (3 << 18)
+#define SMBCR_BURSTLENWRITE_4 (0 << 18)
+#define SMBCR_BURSTLENWRITE_8 (1 << 18)
+#define SMBCR_BURSTLENWRITE_RESERVED (2 << 18)
+#define SMBCR_BURSTLENWRITE_CONTINUOUS (3 << 18)
+
+#define SMBCR_BURSTLENREAD_MASK (3 << 10)
+#define SMBCR_BURSTLENREAD_4 (0 << 10)
+#define SMBCR_BURSTLENREAD_8 (1 << 10)
+#define SMBCR_BURSTLENREAD_16 (2 << 10)
+#define SMBCR_BURSTLENREAD_CONTINUOUS (3 << 10)
+
+#define SMBCR_MW_MASK (3 << 4)
+#define SMBCR_MW_8BIT (0 << 4)
+#define SMBCR_MW_16BIT (1 << 4)
+#define SMBCR_MW_M32BIT (2 << 4)
+
+/* SSMC status registers */
+#define SSMCCSR (0x200)
+#define SSMCCR (0x204)
+#define SSMCITCR (0x208)
+#define SSMCITIP (0x20C)
+#define SSMCITIOP (0x210)
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
index cd4bcb6..7d650a0 100644
--- a/include/linux/arcdevice.h
+++ b/include/linux/arcdevice.h
@@ -337,7 +337,8 @@
int arcnet_open(struct net_device *dev);
int arcnet_close(struct net_device *dev);
-int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
void arcnet_timeout(struct net_device *dev);
#endif /* __KERNEL__ */
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 9c75921..6299a25 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -210,15 +210,25 @@
ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
ATA_CMD_EDD = 0x90, /* execute device diagnostic */
+ ATA_CMD_DOWNLOAD_MICRO = 0x92,
+ ATA_CMD_NOP = 0x00,
ATA_CMD_FLUSH = 0xE7,
ATA_CMD_FLUSH_EXT = 0xEA,
ATA_CMD_ID_ATA = 0xEC,
ATA_CMD_ID_ATAPI = 0xA1,
+ ATA_CMD_SERVICE = 0xA2,
ATA_CMD_READ = 0xC8,
ATA_CMD_READ_EXT = 0x25,
+ ATA_CMD_READ_QUEUED = 0x26,
+ ATA_CMD_READ_STREAM_EXT = 0x2B,
+ ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
ATA_CMD_WRITE = 0xCA,
ATA_CMD_WRITE_EXT = 0x35,
+ ATA_CMD_WRITE_QUEUED = 0x36,
+ ATA_CMD_WRITE_STREAM_EXT = 0x3B,
+ ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
ATA_CMD_WRITE_FUA_EXT = 0x3D,
+ ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
ATA_CMD_FPDMA_READ = 0x60,
ATA_CMD_FPDMA_WRITE = 0x61,
ATA_CMD_PIO_READ = 0x20,
@@ -235,6 +245,7 @@
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_WRITE_UNCORR_EXT = 0x45,
ATA_CMD_STANDBYNOW1 = 0xE0,
ATA_CMD_IDLEIMMEDIATE = 0xE1,
ATA_CMD_SLEEP = 0xE6,
@@ -243,15 +254,34 @@
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
ATA_CMD_SET_MAX = 0xF9,
ATA_CMD_SET_MAX_EXT = 0x37,
- ATA_CMD_READ_LOG_EXT = 0x2f,
+ ATA_CMD_READ_LOG_EXT = 0x2F,
+ ATA_CMD_WRITE_LOG_EXT = 0x3F,
+ ATA_CMD_READ_LOG_DMA_EXT = 0x47,
+ ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
+ ATA_CMD_TRUSTED_RCV = 0x5C,
+ ATA_CMD_TRUSTED_RCV_DMA = 0x5D,
+ ATA_CMD_TRUSTED_SND = 0x5E,
+ ATA_CMD_TRUSTED_SND_DMA = 0x5F,
ATA_CMD_PMP_READ = 0xE4,
ATA_CMD_PMP_WRITE = 0xE8,
ATA_CMD_CONF_OVERLAY = 0xB1,
+ ATA_CMD_SEC_SET_PASS = 0xF1,
+ ATA_CMD_SEC_UNLOCK = 0xF2,
+ ATA_CMD_SEC_ERASE_PREP = 0xF3,
+ ATA_CMD_SEC_ERASE_UNIT = 0xF4,
ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+ ATA_CMD_SEC_DISABLE_PASS = 0xF6,
+ ATA_CMD_CONFIG_STREAM = 0x51,
ATA_CMD_SMART = 0xB0,
ATA_CMD_MEDIA_LOCK = 0xDE,
ATA_CMD_MEDIA_UNLOCK = 0xDF,
ATA_CMD_DSM = 0x06,
+ ATA_CMD_CHK_MED_CRD_TYP = 0xD1,
+ ATA_CMD_CFA_REQ_EXT_ERR = 0x03,
+ ATA_CMD_CFA_WRITE_NE = 0x38,
+ ATA_CMD_CFA_TRANS_SECT = 0x87,
+ ATA_CMD_CFA_ERASE = 0xC0,
+ ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
/* marked obsolete in the ATA/ATAPI-7 spec */
ATA_CMD_RESTORE = 0x10,
@@ -306,6 +336,7 @@
/* SETFEATURE Sector counts for SATA features */
SATA_AN = 0x05, /* Asynchronous Notification */
SATA_DIPM = 0x03, /* Device Initiated Power Management */
+ SATA_FPDMA_AA = 0x02, /* DMA Setup FIS Auto-Activate */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
@@ -525,6 +556,9 @@
#define ata_id_has_atapi_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
+#define ata_id_has_fpdma_aa(id) \
+ ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
+ ((id)[78] & (1 << 2)) )
#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
#define ata_id_u32(id,n) \
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 1d52425..f169bcb 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -13,6 +13,8 @@
#include <linux/proportions.h>
#include <linux/kernel.h>
#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/writeback.h>
#include <asm/atomic.h>
struct page;
@@ -23,9 +25,11 @@
* Bits in backing_dev_info.state
*/
enum bdi_state {
- BDI_pdflush, /* A pdflush thread is working this device */
+ BDI_pending, /* On its way to being activated */
+ BDI_wb_alloc, /* Default embedded wb allocated */
BDI_async_congested, /* The async (write) queue is getting full */
BDI_sync_congested, /* The sync queue is getting full */
+ BDI_registered, /* bdi_register() was done */
BDI_unused, /* Available bits start here */
};
@@ -39,7 +43,22 @@
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
+struct bdi_writeback {
+ struct list_head list; /* hangs off the bdi */
+
+ struct backing_dev_info *bdi; /* our parent bdi */
+ unsigned int nr;
+
+ unsigned long last_old_flush; /* last old data flush */
+
+ struct task_struct *task; /* writeback task */
+ struct list_head b_dirty; /* dirty inodes */
+ struct list_head b_io; /* parked for writeback */
+ struct list_head b_more_io; /* parked for more writeback */
+};
+
struct backing_dev_info {
+ struct list_head bdi_list;
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
unsigned long state; /* Always use atomic bitops on this */
unsigned int capabilities; /* Device capabilities */
@@ -48,6 +67,8 @@
void (*unplug_io_fn)(struct backing_dev_info *, struct page *);
void *unplug_io_data;
+ char *name;
+
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
struct prop_local_percpu completions;
@@ -56,6 +77,14 @@
unsigned int min_ratio;
unsigned int max_ratio, max_prop_frac;
+ struct bdi_writeback wb; /* default writeback info for this bdi */
+ spinlock_t wb_lock; /* protects update side of wb_list */
+ struct list_head wb_list; /* the flusher threads hanging off this bdi */
+ unsigned long wb_mask; /* bitmask of registered tasks */
+ unsigned int wb_cnt; /* number of registered tasks */
+
+ struct list_head work_list;
+
struct device *dev;
#ifdef CONFIG_DEBUG_FS
@@ -71,6 +100,19 @@
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
+void bdi_start_writeback(struct writeback_control *wbc);
+int bdi_writeback_task(struct bdi_writeback *wb);
+int bdi_has_dirty_io(struct backing_dev_info *bdi);
+
+extern spinlock_t bdi_lock;
+extern struct list_head bdi_list;
+
+static inline int wb_has_dirty_io(struct bdi_writeback *wb)
+{
+ return !list_empty(&wb->b_dirty) ||
+ !list_empty(&wb->b_io) ||
+ !list_empty(&wb->b_more_io);
+}
static inline void __add_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item, s64 amount)
@@ -261,6 +303,11 @@
return bdi->capabilities & BDI_CAP_SWAP_BACKED;
}
+static inline bool bdi_cap_flush_forker(struct backing_dev_info *bdi)
+{
+ return bdi == &default_backing_dev_info;
+}
+
static inline bool mapping_cap_writeback_dirty(struct address_space *mapping)
{
return bdi_cap_writeback_dirty(mapping->backing_dev_info);
@@ -276,4 +323,10 @@
return bdi_cap_swap_backed(mapping->backing_dev_info);
}
+static inline int bdi_sched_wait(void *word)
+{
+ schedule();
+ return 0;
+}
+
#endif /* _LINUX_BACKING_DEV_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 61ee18c..2046b5b 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -117,6 +117,7 @@
int executable_stack);
extern int bprm_mm_init(struct linux_binprm *bprm);
extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm);
+extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
extern int set_binfmt(struct linux_binfmt *new);
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 4a37a56..5824b20 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -66,5 +66,6 @@
void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx);
void can_get_echo_skb(struct net_device *dev, int idx);
+void can_free_echo_skb(struct net_device *dev, int idx);
#endif /* CAN_DEV_H */
diff --git a/include/linux/connector.h b/include/linux/connector.h
index b68d278..47ebf41 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -136,7 +136,7 @@
void *ddata;
void *callback_priv;
- void (*callback) (void *);
+ void (*callback) (struct cn_msg *);
void *free;
};
@@ -167,11 +167,11 @@
struct cn_queue_dev *cbdev;
};
-int cn_add_callback(struct cb_id *, char *, void (*callback) (void *));
+int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *));
void cn_del_callback(struct cb_id *);
int cn_netlink_send(struct cn_msg *, u32, gfp_t);
-int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *));
+int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *));
void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work);
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 4d668e0..4753619 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -48,6 +48,15 @@
#ifdef CONFIG_SMP
/* Need to know about CPUs going up/down? */
+#if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE)
+#define cpu_notifier(fn, pri) { \
+ static struct notifier_block fn##_nb __cpuinitdata = \
+ { .notifier_call = fn, .priority = pri }; \
+ register_cpu_notifier(&fn##_nb); \
+}
+#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
+#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
+#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
#ifdef CONFIG_HOTPLUG_CPU
extern int register_cpu_notifier(struct notifier_block *nb);
extern void unregister_cpu_notifier(struct notifier_block *nb);
@@ -74,6 +83,8 @@
#else /* CONFIG_SMP */
+#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
+
static inline int register_cpu_notifier(struct notifier_block *nb)
{
return 0;
@@ -99,11 +110,7 @@
extern void get_online_cpus(void);
extern void put_online_cpus(void);
-#define hotcpu_notifier(fn, pri) { \
- static struct notifier_block fn##_nb __cpuinitdata = \
- { .notifier_call = fn, .priority = pri }; \
- register_cpu_notifier(&fn##_nb); \
-}
+#define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri)
#define register_hotcpu_notifier(nb) register_cpu_notifier(nb)
#define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb)
int cpu_down(unsigned int cpu);
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 4fa9996..24520a5 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -114,6 +114,13 @@
*/
struct cred {
atomic_t usage;
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ atomic_t subscribers; /* number of processes subscribed */
+ void *put_addr;
+ unsigned magic;
+#define CRED_MAGIC 0x43736564
+#define CRED_MAGIC_DEAD 0x44656144
+#endif
uid_t uid; /* real UID of the task */
gid_t gid; /* real GID of the task */
uid_t suid; /* saved UID of the task */
@@ -143,7 +150,9 @@
};
extern void __put_cred(struct cred *);
+extern void exit_creds(struct task_struct *);
extern int copy_creds(struct task_struct *, unsigned long);
+extern struct cred *cred_alloc_blank(void);
extern struct cred *prepare_creds(void);
extern struct cred *prepare_exec_creds(void);
extern struct cred *prepare_usermodehelper_creds(void);
@@ -158,6 +167,60 @@
extern int set_create_files_as(struct cred *, struct inode *);
extern void __init cred_init(void);
+/*
+ * check for validity of credentials
+ */
+#ifdef CONFIG_DEBUG_CREDENTIALS
+extern void __invalid_creds(const struct cred *, const char *, unsigned);
+extern void __validate_process_creds(struct task_struct *,
+ const char *, unsigned);
+
+static inline bool creds_are_invalid(const struct cred *cred)
+{
+ if (cred->magic != CRED_MAGIC)
+ return true;
+ if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
+ return true;
+#ifdef CONFIG_SECURITY_SELINUX
+ if ((unsigned long) cred->security < PAGE_SIZE)
+ return true;
+ if ((*(u32*)cred->security & 0xffffff00) ==
+ (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))
+ return true;
+#endif
+ return false;
+}
+
+static inline void __validate_creds(const struct cred *cred,
+ const char *file, unsigned line)
+{
+ if (unlikely(creds_are_invalid(cred)))
+ __invalid_creds(cred, file, line);
+}
+
+#define validate_creds(cred) \
+do { \
+ __validate_creds((cred), __FILE__, __LINE__); \
+} while(0)
+
+#define validate_process_creds() \
+do { \
+ __validate_process_creds(current, __FILE__, __LINE__); \
+} while(0)
+
+extern void validate_creds_for_do_exit(struct task_struct *);
+#else
+static inline void validate_creds(const struct cred *cred)
+{
+}
+static inline void validate_creds_for_do_exit(struct task_struct *tsk)
+{
+}
+static inline void validate_process_creds(void)
+{
+}
+#endif
+
/**
* get_new_cred - Get a reference on a new set of credentials
* @cred: The new credentials to reference
@@ -186,7 +249,9 @@
*/
static inline const struct cred *get_cred(const struct cred *cred)
{
- return get_new_cred((struct cred *) cred);
+ struct cred *nonconst_cred = (struct cred *) cred;
+ validate_creds(cred);
+ return get_new_cred(nonconst_cred);
}
/**
@@ -204,7 +269,7 @@
{
struct cred *cred = (struct cred *) _cred;
- BUG_ON(atomic_read(&(cred)->usage) <= 0);
+ validate_creds(cred);
if (atomic_dec_and_test(&(cred)->usage))
__put_cred(cred);
}
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index ec29fa2..fd92988 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -115,7 +115,6 @@
struct crypto_aead;
struct crypto_blkcipher;
struct crypto_hash;
-struct crypto_ahash;
struct crypto_rng;
struct crypto_tfm;
struct crypto_type;
@@ -146,16 +145,6 @@
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};
-struct ahash_request {
- struct crypto_async_request base;
-
- unsigned int nbytes;
- struct scatterlist *src;
- u8 *result;
-
- void *__ctx[] CRYPTO_MINALIGN_ATTR;
-};
-
/**
* struct aead_request - AEAD request
* @base: Common attributes for async crypto requests
@@ -220,18 +209,6 @@
unsigned int ivsize;
};
-struct ahash_alg {
- int (*init)(struct ahash_request *req);
- int (*reinit)(struct ahash_request *req);
- int (*update)(struct ahash_request *req);
- int (*final)(struct ahash_request *req);
- int (*digest)(struct ahash_request *req);
- int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
- unsigned int keylen);
-
- unsigned int digestsize;
-};
-
struct aead_alg {
int (*setkey)(struct crypto_aead *tfm, const u8 *key,
unsigned int keylen);
@@ -318,7 +295,6 @@
#define cra_cipher cra_u.cipher
#define cra_digest cra_u.digest
#define cra_hash cra_u.hash
-#define cra_ahash cra_u.ahash
#define cra_compress cra_u.compress
#define cra_rng cra_u.rng
@@ -346,7 +322,6 @@
struct cipher_alg cipher;
struct digest_alg digest;
struct hash_alg hash;
- struct ahash_alg ahash;
struct compress_alg compress;
struct rng_alg rng;
} cra_u;
@@ -433,18 +408,6 @@
unsigned int digestsize;
};
-struct ahash_tfm {
- int (*init)(struct ahash_request *req);
- int (*update)(struct ahash_request *req);
- int (*final)(struct ahash_request *req);
- int (*digest)(struct ahash_request *req);
- int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
- unsigned int keylen);
-
- unsigned int digestsize;
- unsigned int reqsize;
-};
-
struct compress_tfm {
int (*cot_compress)(struct crypto_tfm *tfm,
const u8 *src, unsigned int slen,
@@ -465,7 +428,6 @@
#define crt_blkcipher crt_u.blkcipher
#define crt_cipher crt_u.cipher
#define crt_hash crt_u.hash
-#define crt_ahash crt_u.ahash
#define crt_compress crt_u.compress
#define crt_rng crt_u.rng
@@ -479,7 +441,6 @@
struct blkcipher_tfm blkcipher;
struct cipher_tfm cipher;
struct hash_tfm hash;
- struct ahash_tfm ahash;
struct compress_tfm compress;
struct rng_tfm rng;
} crt_u;
@@ -770,7 +731,7 @@
static inline void ablkcipher_request_free(struct ablkcipher_request *req)
{
- kfree(req);
+ kzfree(req);
}
static inline void ablkcipher_request_set_callback(
@@ -901,7 +862,7 @@
static inline void aead_request_free(struct aead_request *req)
{
- kfree(req);
+ kzfree(req);
}
static inline void aead_request_set_callback(struct aead_request *req,
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
index 7d2e100..b7cdbb4 100644
--- a/include/linux/dcbnl.h
+++ b/include/linux/dcbnl.h
@@ -50,6 +50,8 @@
* @DCB_CMD_SNUMTCS: set the number of traffic classes
* @DCB_CMD_GBCN: set backward congestion notification configuration
* @DCB_CMD_SBCN: get backward congestion notification configration.
+ * @DCB_CMD_GAPP: get application protocol configuration
+ * @DCB_CMD_SAPP: set application protocol configuration
*/
enum dcbnl_commands {
DCB_CMD_UNDEFINED,
@@ -80,6 +82,9 @@
DCB_CMD_BCN_GCFG,
DCB_CMD_BCN_SCFG,
+ DCB_CMD_GAPP,
+ DCB_CMD_SAPP,
+
__DCB_CMD_ENUM_MAX,
DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
};
@@ -114,6 +119,7 @@
DCB_ATTR_CAP,
DCB_ATTR_NUMTCS,
DCB_ATTR_BCN,
+ DCB_ATTR_APP,
__DCB_ATTR_ENUM_MAX,
DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
@@ -338,5 +344,17 @@
DCB_ATTR_VALUE_UNDEFINED = 0xff
};
+#define DCB_APP_IDTYPE_ETHTYPE 0x00
+#define DCB_APP_IDTYPE_PORTNUM 0x01
+enum dcbnl_app_attrs {
+ DCB_APP_ATTR_UNDEFINED,
+
+ DCB_APP_ATTR_IDTYPE,
+ DCB_APP_ATTR_ID,
+ DCB_APP_ATTR_PRIORITY,
+
+ __DCB_APP_ATTR_ENUM_MAX,
+ DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
+};
#endif /* __LINUX_DCBNL_H__ */
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 655e772..df7607e 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -91,6 +91,9 @@
iterate_devices_callout_fn fn,
void *data);
+typedef void (*dm_io_hints_fn) (struct dm_target *ti,
+ struct queue_limits *limits);
+
/*
* Returns:
* 0: The target can handle the next I/O immediately.
@@ -151,6 +154,7 @@
dm_merge_fn merge;
dm_busy_fn busy;
dm_iterate_devices_fn iterate_devices;
+ dm_io_hints_fn io_hints;
/* For internal device-mapper use. */
struct list_head list;
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
index 642e301..8a1f972 100644
--- a/include/linux/dm-log-userspace.h
+++ b/include/linux/dm-log-userspace.h
@@ -371,7 +371,18 @@
(DM_ULOG_REQUEST_MASK & (request_type))
struct dm_ulog_request {
- char uuid[DM_UUID_LEN]; /* Ties a request to a specific mirror log */
+ /*
+ * The local unique identifier (luid) and the universally unique
+ * identifier (uuid) are used to tie a request to a specific
+ * mirror log. A single machine log could probably make due with
+ * just the 'luid', but a cluster-aware log must use the 'uuid' and
+ * the 'luid'. The uuid is what is required for node to node
+ * communication concerning a particular log, but the 'luid' helps
+ * differentiate between logs that are being swapped and have the
+ * same 'uuid'. (Think "live" and "inactive" device-mapper tables.)
+ */
+ uint64_t luid;
+ char uuid[DM_UUID_LEN];
char padding[7]; /* Padding because DM_UUID_LEN = 129 */
int32_t error; /* Used to report back processing errors */
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 07dfd46..c0f6c3c 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -98,11 +98,6 @@
return dev->dma_mask != NULL && *dev->dma_mask != DMA_MASK_NONE;
}
-static inline int is_buffer_dma_capable(u64 mask, dma_addr_t addr, size_t size)
-{
- return addr + size <= mask;
-}
-
#ifdef CONFIG_HAS_DMA
#include <asm/dma-mapping.h>
#else
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index bb5489c..a8a3e1a 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -43,7 +43,7 @@
extern const struct dmi_device * dmi_find_device(int type, const char *name,
const struct dmi_device *from);
extern void dmi_scan_machine(void);
-extern int dmi_get_year(int field);
+extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);
extern int dmi_name_in_vendors(const char *str);
extern int dmi_name_in_serial(const char *str);
extern int dmi_available;
@@ -58,7 +58,16 @@
static inline const struct dmi_device * dmi_find_device(int type, const char *name,
const struct dmi_device *from) { return NULL; }
static inline void dmi_scan_machine(void) { return; }
-static inline int dmi_get_year(int year) { return 0; }
+static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
+{
+ if (yearp)
+ *yearp = 0;
+ if (monthp)
+ *monthp = 0;
+ if (dayp)
+ *dayp = 0;
+ return false;
+}
static inline int dmi_name_in_vendors(const char *s) { return 0; }
static inline int dmi_name_in_serial(const char *s) { return 0; }
#define dmi_available 0
diff --git a/include/linux/dtlk.h b/include/linux/dtlk.h
index 2896d90..22a7b9a 100644
--- a/include/linux/dtlk.h
+++ b/include/linux/dtlk.h
@@ -1,22 +1,3 @@
-#if 0
-
-#define TRACE_TXT(text) \
- { \
- if(dtlk_trace) \
- { \
- console_print(text); \
- console_print("\n"); \
- } \
- }
-
-#define TRACE_CHR(chr) \
- { \
- if(dtlk_trace) \
- console_print(chr); \
- } \
-
-#endif
-
#define DTLK_MINOR 0
#define DTLK_IO_EXTENT 0x02
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 9b660bd..15e4eb7 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -362,12 +362,25 @@
__u32 rule_locs[0];
};
+#define ETHTOOL_FLASH_MAX_FILENAME 128
+enum ethtool_flash_op_type {
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+ __u32 cmd;
+ __u32 region;
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
#ifdef __KERNEL__
struct net_device;
/* Some generic methods drivers may use in their ethtool_ops */
u32 ethtool_op_get_link(struct net_device *dev);
+u32 ethtool_op_get_rx_csum(struct net_device *dev);
u32 ethtool_op_get_tx_csum(struct net_device *dev);
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
@@ -488,6 +501,7 @@
int (*get_stats_count)(struct net_device *);/* use get_sset_count */
int (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
+ int (*flash_device)(struct net_device *, struct ethtool_flash *);
};
#endif /* __KERNEL__ */
@@ -544,6 +558,7 @@
#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
diff --git a/include/linux/fips.h b/include/linux/fips.h
new file mode 100644
index 0000000..f8fb07b
--- /dev/null
+++ b/include/linux/fips.h
@@ -0,0 +1,10 @@
+#ifndef _FIPS_H
+#define _FIPS_H
+
+#ifdef CONFIG_CRYPTO_FIPS
+extern int fips_enabled;
+#else
+#define fips_enabled 0
+#endif
+
+#endif
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
index 23c1ec7..45ff184 100644
--- a/include/linux/flex_array.h
+++ b/include/linux/flex_array.h
@@ -21,7 +21,7 @@
struct {
int element_size;
int total_nr_elements;
- struct flex_array_part *parts[0];
+ struct flex_array_part *parts[];
};
/*
* This little trick makes sure that
@@ -36,12 +36,14 @@
.total_nr_elements = (total), \
} } }
-struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags);
-int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags);
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+ gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+ unsigned int end, gfp_t flags);
void flex_array_free(struct flex_array *fa);
void flex_array_free_parts(struct flex_array *fa);
-int flex_array_put(struct flex_array *fa, int element_nr, void *src,
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
gfp_t flags);
-void *flex_array_get(struct flex_array *fa, int element_nr);
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 67888a9..37f5321 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -715,7 +715,7 @@
struct inode {
struct hlist_node i_hash;
- struct list_head i_list;
+ struct list_head i_list; /* backing dev IO list */
struct list_head i_sb_list;
struct list_head i_dentry;
unsigned long i_ino;
@@ -1336,9 +1336,6 @@
struct xattr_handler **s_xattr;
struct list_head s_inodes; /* all inodes */
- struct list_head s_dirty; /* dirty inodes */
- struct list_head s_io; /* parked for writeback */
- struct list_head s_more_io; /* parked for more writeback */
struct hlist_head s_anon; /* anonymous dentries for (nfs) exporting */
struct list_head s_files;
/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
@@ -1458,11 +1455,6 @@
#define DT_SOCK 12
#define DT_WHT 14
-#define OSYNC_METADATA (1<<0)
-#define OSYNC_DATA (1<<1)
-#define OSYNC_INODE (1<<2)
-int generic_osync_inode(struct inode *, struct address_space *, int);
-
/*
* This is the "filldir" function type, used by readdir() to let
* the kernel specify what kind of dirent layout it wants to have.
@@ -1528,6 +1520,7 @@
void (*put_link) (struct dentry *, struct nameidata *, void *);
void (*truncate) (struct inode *);
int (*permission) (struct inode *, int);
+ int (*check_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
@@ -1788,6 +1781,7 @@
struct vfsmount *mnt);
extern void simple_set_mnt(struct vfsmount *mnt, struct super_block *sb);
int __put_super_and_need_restart(struct super_block *sb);
+void put_super(struct super_block *sb);
/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
#define fops_get(fops) \
@@ -1998,12 +1992,25 @@
#define CHRDEV_MAJOR_HASH_SIZE 255
extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
extern int register_chrdev_region(dev_t, unsigned, const char *);
-extern int register_chrdev(unsigned int, const char *,
- const struct file_operations *);
-extern void unregister_chrdev(unsigned int, const char *);
+extern int __register_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name,
+ const struct file_operations *fops);
+extern void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+ unsigned int count, const char *name);
extern void unregister_chrdev_region(dev_t, unsigned);
extern void chrdev_show(struct seq_file *,off_t);
+static inline int register_chrdev(unsigned int major, const char *name,
+ const struct file_operations *fops)
+{
+ return __register_chrdev(major, 0, 256, name, fops);
+}
+
+static inline void unregister_chrdev(unsigned int major, const char *name)
+{
+ __unregister_chrdev(major, 0, 256, name);
+}
+
/* fs/block_dev.c */
#define BDEVNAME_SIZE 32 /* Largest string for a blockdev identifier */
#define BDEVT_SIZE 10 /* Largest string for MAJ:MIN for blkdev */
@@ -2070,12 +2077,12 @@
extern int invalidate_inode_pages2(struct address_space *mapping);
extern int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end);
-extern void generic_sync_sb_inodes(struct super_block *sb,
- struct writeback_control *wbc);
extern int write_inode_now(struct inode *, int);
extern int filemap_fdatawrite(struct address_space *);
extern int filemap_flush(struct address_space *);
extern int filemap_fdatawait(struct address_space *);
+extern int filemap_fdatawait_range(struct address_space *, loff_t lstart,
+ loff_t lend);
extern int filemap_write_and_wait(struct address_space *mapping);
extern int filemap_write_and_wait_range(struct address_space *mapping,
loff_t lstart, loff_t lend);
@@ -2086,7 +2093,10 @@
extern int filemap_fdatawrite_range(struct address_space *mapping,
loff_t start, loff_t end);
+extern int vfs_fsync_range(struct file *file, struct dentry *dentry,
+ loff_t start, loff_t end, int datasync);
extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync);
+extern int generic_write_sync(struct file *file, loff_t pos, loff_t count);
extern void sync_supers(void);
extern void emergency_sync(void);
extern void emergency_remount(void);
@@ -2123,7 +2133,7 @@
int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
-extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
+extern int kernel_read(struct file *, loff_t, char *, unsigned long);
extern struct file * open_exec(const char *);
/* fs/dcache.c -- generic fs support functions */
@@ -2186,16 +2196,15 @@
extern int set_blocksize(struct block_device *, int);
extern int sb_set_blocksize(struct super_block *, int);
extern int sb_min_blocksize(struct super_block *, int);
-extern int sb_has_dirty_inodes(struct super_block *);
extern int generic_file_mmap(struct file *, struct vm_area_struct *);
extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
extern int file_read_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size);
int generic_write_checks(struct file *file, loff_t *pos, size_t *count, int isblk);
extern ssize_t generic_file_aio_read(struct kiocb *, const struct iovec *, unsigned long, loff_t);
+extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long,
+ loff_t *);
extern ssize_t generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t);
-extern ssize_t generic_file_aio_write_nolock(struct kiocb *, const struct iovec *,
- unsigned long, loff_t);
extern ssize_t generic_file_direct_write(struct kiocb *, const struct iovec *,
unsigned long *, loff_t, loff_t *, size_t, size_t);
extern ssize_t generic_file_buffered_write(struct kiocb *, const struct iovec *,
@@ -2205,6 +2214,10 @@
extern int generic_segment_checks(const struct iovec *iov,
unsigned long *nr_segs, size_t *count, int access_flags);
+/* fs/block_dev.c */
+extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos);
+
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
struct pipe_inode_info *, size_t, unsigned int);
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index a81170d..23f7179 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -93,16 +93,22 @@
unsigned long flags,
int pc);
struct ring_buffer_event *
-trace_current_buffer_lock_reserve(int type, unsigned long len,
+trace_current_buffer_lock_reserve(struct ring_buffer **current_buffer,
+ int type, unsigned long len,
unsigned long flags, int pc);
-void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
+void trace_current_buffer_unlock_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event,
unsigned long flags, int pc);
-void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
+void trace_nowake_buffer_unlock_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event,
unsigned long flags, int pc);
-void trace_current_buffer_discard_commit(struct ring_buffer_event *event);
+void trace_current_buffer_discard_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event);
void tracing_record_cmdline(struct task_struct *tsk);
+struct event_filter;
+
struct ftrace_event_call {
struct list_head list;
char *name;
@@ -110,16 +116,18 @@
struct dentry *dir;
struct trace_event *event;
int enabled;
- int (*regfunc)(void);
- void (*unregfunc)(void);
+ int (*regfunc)(void *);
+ void (*unregfunc)(void *);
int id;
int (*raw_init)(void);
- int (*show_format)(struct trace_seq *s);
- int (*define_fields)(void);
+ int (*show_format)(struct ftrace_event_call *call,
+ struct trace_seq *s);
+ int (*define_fields)(struct ftrace_event_call *);
struct list_head fields;
int filter_active;
- void *filter;
+ struct event_filter *filter;
void *mod;
+ void *data;
atomic_t profile_count;
int (*profile_enable)(struct ftrace_event_call *);
@@ -129,15 +137,25 @@
#define MAX_FILTER_PRED 32
#define MAX_FILTER_STR_VAL 128
-extern int init_preds(struct ftrace_event_call *call);
extern void destroy_preds(struct ftrace_event_call *call);
extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
-extern int filter_current_check_discard(struct ftrace_event_call *call,
+extern int filter_current_check_discard(struct ring_buffer *buffer,
+ struct ftrace_event_call *call,
void *rec,
struct ring_buffer_event *event);
-extern int trace_define_field(struct ftrace_event_call *call, char *type,
- char *name, int offset, int size, int is_signed);
+enum {
+ FILTER_OTHER = 0,
+ FILTER_STATIC_STRING,
+ FILTER_DYN_STRING,
+ FILTER_PTR_STRING,
+};
+
+extern int trace_define_field(struct ftrace_event_call *call,
+ const char *type, const char *name,
+ int offset, int size, int is_signed,
+ int filter_type);
+extern int trace_define_common_fields(struct ftrace_event_call *call);
#define is_signed_type(type) (((type)(-1)) < 0)
@@ -162,11 +180,4 @@
__trace_printk(ip, fmt, ##args); \
} while (0)
-#define __common_field(type, item, is_signed) \
- ret = trace_define_field(event_call, #type, "common_" #item, \
- offsetof(typeof(field.ent), item), \
- sizeof(field.ent.item), is_signed); \
- if (ret) \
- return ret;
-
#endif /* _LINUX_FTRACE_EVENT_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
index c56b4bc..b80c88d 100644
--- a/include/linux/gfs2_ondisk.h
+++ b/include/linux/gfs2_ondisk.h
@@ -333,6 +333,28 @@
/*
* Extended attribute header format
+ *
+ * This works in a similar way to dirents. There is a fixed size header
+ * followed by a variable length section made up of the name and the
+ * associated data. In the case of a "stuffed" entry, the value is
+ * inline directly after the name, the ea_num_ptrs entry will be
+ * zero in that case. For non-"stuffed" entries, there will be
+ * a set of pointers (aligned to 8 byte boundary) to the block(s)
+ * containing the value.
+ *
+ * The blocks containing the values and the blocks containing the
+ * extended attribute headers themselves all start with the common
+ * metadata header. Each inode, if it has extended attributes, will
+ * have either a single block containing the extended attribute headers
+ * or a single indirect block pointing to blocks containing the
+ * extended attribure headers.
+ *
+ * The maximim size of the data part of an extended attribute is 64k
+ * so the number of blocks required depends upon block size. Since the
+ * block size also determines the number of pointers in an indirect
+ * block, its a fairly complicated calculation to work out the maximum
+ * number of blocks that an inode may have relating to extended attributes.
+ *
*/
#define GFS2_EA_MAX_NAME_LEN 255
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 8246c69..6d527ee 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -64,6 +64,12 @@
#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
#define NMI_OFFSET (1UL << NMI_SHIFT)
+#ifndef PREEMPT_ACTIVE
+#define PREEMPT_ACTIVE_BITS 1
+#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS)
+#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
+#endif
+
#if PREEMPT_ACTIVE < (1 << (NMI_SHIFT + NMI_BITS))
#error PREEMPT_ACTIVE is too low!
#endif
@@ -132,7 +138,7 @@
}
#endif
-#if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU)
+#if defined(CONFIG_NO_HZ)
extern void rcu_irq_enter(void);
extern void rcu_irq_exit(void);
extern void rcu_nmi_enter(void);
@@ -142,7 +148,7 @@
# define rcu_irq_exit() do { } while (0)
# define rcu_nmi_enter() do { } while (0)
# define rcu_nmi_exit() do { } while (0)
-#endif /* #if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU) */
+#endif /* #if defined(CONFIG_NO_HZ) */
/*
* It is safe to do non-atomic ops on ->hardirq_context,
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index 6a6e701..ee275c8 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -38,7 +38,7 @@
int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
__be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
int (*netif_rx)(struct sk_buff *skb);
- int (*xmit)(struct sk_buff *skb, struct net_device *dev);
+ netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev);
struct module *module;
struct hdlc_proto *next; /* next protocol in the list */
};
@@ -51,7 +51,7 @@
unsigned short encoding, unsigned short parity);
/* hardware driver must handle this instead of dev->hard_start_xmit */
- int (*xmit)(struct sk_buff *skb, struct net_device *dev);
+ netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev);
/* Things below are for HDLC layer internal use only */
const struct hdlc_proto *proto;
@@ -60,7 +60,7 @@
spinlock_t state_lock;
void *state;
void *priv;
-}hdlc_device;
+} hdlc_device;
@@ -106,7 +106,7 @@
/* May be used by hardware driver */
int hdlc_change_mtu(struct net_device *dev, int new_mtu);
/* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */
-int hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);
int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
size_t size);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 2723513..5cbc620 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -10,6 +10,7 @@
#include <asm/tlbflush.h>
struct ctl_table;
+struct user_struct;
int PageHuge(struct page *page);
@@ -146,7 +147,8 @@
extern const struct file_operations hugetlbfs_file_operations;
extern struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, size_t, int);
+struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
+ struct user_struct **user);
int hugetlb_get_quota(struct address_space *mapping, long delta);
void hugetlb_put_quota(struct address_space *mapping, long delta);
@@ -168,7 +170,7 @@
#define is_file_hugepages(file) 0
#define set_file_hugepages(file) BUG()
-#define hugetlb_file_setup(name,size,acctflag) ERR_PTR(-ENOSYS)
+#define hugetlb_file_setup(name,size,acct,user) ERR_PTR(-ENOSYS)
#endif /* !CONFIG_HUGETLBFS */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index b6a8518..c0d8357 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -171,8 +171,6 @@
#ifdef __KERNEL__
#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-
extern void icmpv6_send(struct sk_buff *skb,
u8 type, u8 code,
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a9173d5..52e15e0 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -115,7 +115,7 @@
#define IEEE80211_MAX_SSID_LEN 32
#define IEEE80211_MAX_MESH_ID_LEN 32
-#define IEEE80211_MESH_CONFIG_LEN 19
+#define IEEE80211_MESH_CONFIG_LEN 24
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
@@ -802,6 +802,31 @@
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
+/*
+ * Maximum length of AMPDU that the STA can receive.
+ * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
+ */
+enum ieee80211_max_ampdu_length_exp {
+ IEEE80211_HT_MAX_AMPDU_8K = 0,
+ IEEE80211_HT_MAX_AMPDU_16K = 1,
+ IEEE80211_HT_MAX_AMPDU_32K = 2,
+ IEEE80211_HT_MAX_AMPDU_64K = 3
+};
+
+#define IEEE80211_HT_MAX_AMPDU_FACTOR 13
+
+/* Minimum MPDU start spacing */
+enum ieee80211_min_mpdu_spacing {
+ IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */
+ IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */
+ IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */
+ IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */
+ IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */
+ IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */
+ IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */
+ IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */
+};
+
/**
* struct ieee80211_ht_info - HT information
*
@@ -1196,6 +1221,10 @@
#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06
+/* AKM suite selectors */
+#define WLAN_AKM_SUITE_8021X 0x000FAC01
+#define WLAN_AKM_SUITE_PSK 0x000FAC02
+
#define WLAN_MAX_KEY_LEN 32
/**
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
index a60c821..fd97404 100644
--- a/include/linux/if_addr.h
+++ b/include/linux/if_addr.h
@@ -41,6 +41,7 @@
#define IFA_F_NODAD 0x02
#define IFA_F_OPTIMISTIC 0x04
+#define IFA_F_DADFAILED 0x08
#define IFA_F_HOMEADDRESS 0x10
#define IFA_F_DEPRECATED 0x20
#define IFA_F_TENTATIVE 0x40
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index b554300..282eb37 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -87,7 +87,6 @@
#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
#define ARPHRD_IEEE802154 804
-#define ARPHRD_IEEE802154_PHY 805
#define ARPHRD_PHONET 820 /* PhoNet media type */
#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 70fdba2..580b600 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -139,10 +139,10 @@
/*
* Display a 6 byte device address (MAC) in a readable format.
*/
-extern char *print_mac(char *buf, const unsigned char *addr);
+extern char *print_mac(char *buf, const unsigned char *addr) __deprecated;
#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
#define MAC_BUF_SIZE 18
-#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] __maybe_unused
+#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE]
#endif
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 673f220..80b3a10 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -69,11 +69,6 @@
#define DLCI_VALID_FLAGS 0x000B
-/* FRAD driver uses these to indicate what it did with packet */
-#define DLCI_RET_OK 0x00
-#define DLCI_RET_ERR 0x01
-#define DLCI_RET_DROP 0x02
-
/* defines for the actual Frame Relay hardware */
#define FRAD_GET_CONF (SIOCDEVPRIVATE)
#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1)
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 915ba57..3f5fd52 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -62,6 +62,7 @@
#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */
#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */
#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */
+#define TUN_F_UFO 0x10 /* I can handle UFO packets */
/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
#define TUN_PKT_STRIP 0x0001
diff --git a/include/linux/init.h b/include/linux/init.h
index 13b633e..400adbb 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -103,8 +103,8 @@
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
-#define __INITDATA .section ".init.data","aw"
-#define __INITRODATA .section ".init.rodata","a"
+#define __INITDATA .section ".init.data","aw",%progbits
+#define __INITRODATA .section ".init.rodata","a",%progbits
#define __FINITDATA .previous
#define __DEVINIT .section ".devinit.text", "ax"
@@ -305,9 +305,17 @@
#ifdef CONFIG_MODULES
#define __init_or_module
#define __initdata_or_module
+#define __initconst_or_module
+#define __INIT_OR_MODULE .text
+#define __INITDATA_OR_MODULE .data
+#define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits
#else
#define __init_or_module __init
#define __initdata_or_module __initdata
+#define __initconst_or_module __initconst
+#define __INIT_OR_MODULE __INIT
+#define __INITDATA_OR_MODULE __INITDATA
+#define __INITRODATA_OR_MODULE __INITRODATA
#endif /*CONFIG_MODULES*/
/* Functions marked as __devexit may be discarded at kernel link time, depending
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 7fc01b1..9e7f2e8 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -94,6 +94,16 @@
# define CAP_INIT_BSET CAP_INIT_EFF_SET
#endif
+#ifdef CONFIG_TREE_PREEMPT_RCU
+#define INIT_TASK_RCU_PREEMPT(tsk) \
+ .rcu_read_lock_nesting = 0, \
+ .rcu_read_unlock_special = 0, \
+ .rcu_blocked_node = NULL, \
+ .rcu_node_entry = LIST_HEAD_INIT(tsk.rcu_node_entry),
+#else
+#define INIT_TASK_RCU_PREEMPT(tsk)
+#endif
+
extern struct cred init_cred;
#ifdef CONFIG_PERF_COUNTERS
@@ -173,6 +183,7 @@
INIT_LOCKDEP \
INIT_FTRACE_GRAPH \
INIT_TRACE_RECURSION \
+ INIT_TASK_RCU_PREEMPT(tsk) \
}
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 35e7df1..1ac57e5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -50,6 +50,9 @@
* IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
* registered first in an shared interrupt is considered for
* performance reasons)
+ * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
+ * Used by threaded interrupts which need to keep the
+ * irq line disabled until the threaded handler has been run.
*/
#define IRQF_DISABLED 0x00000020
#define IRQF_SAMPLE_RANDOM 0x00000040
@@ -59,6 +62,7 @@
#define IRQF_PERCPU 0x00000400
#define IRQF_NOBALANCING 0x00000800
#define IRQF_IRQPOLL 0x00001000
+#define IRQF_ONESHOT 0x00002000
/*
* Bits used by threaded handlers:
diff --git a/include/linux/irq.h b/include/linux/irq.h
index cb2e77a..ae9653d 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -69,6 +69,8 @@
#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#define IRQ_SUSPENDED 0x04000000 /* IRQ has gone through suspend sequence */
+#define IRQ_ONESHOT 0x08000000 /* IRQ is not unmasked after hardirq */
+#define IRQ_NESTED_THREAD 0x10000000 /* IRQ is nested into another, no own handler thread */
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
@@ -100,6 +102,9 @@
* @set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
* @set_wake: enable/disable power-management wake-on of an IRQ
*
+ * @bus_lock: function to lock access to slow bus (i2c) chips
+ * @bus_sync_unlock: function to sync and unlock slow bus (i2c) chips
+ *
* @release: release function solely used by UML
* @typename: obsoleted by name, kept as migration helper
*/
@@ -123,6 +128,9 @@
int (*set_type)(unsigned int irq, unsigned int flow_type);
int (*set_wake)(unsigned int irq, unsigned int on);
+ void (*bus_lock)(unsigned int irq);
+ void (*bus_sync_unlock)(unsigned int irq);
+
/* Currently used only by UML, might disappear one day.*/
#ifdef CONFIG_IRQ_RELEASE_METHOD
void (*release)(unsigned int irq, void *dev_id);
@@ -220,13 +228,6 @@
extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node);
/*
- * Migration helpers for obsolete names, they will go away:
- */
-#define hw_interrupt_type irq_chip
-#define no_irq_type no_irq_chip
-typedef struct irq_desc irq_desc_t;
-
-/*
* Pick up the arch-dependent methods:
*/
#include <asm/hw_irq.h>
@@ -289,6 +290,7 @@
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_nested_irq(unsigned int irq);
/*
* Monolithic do_IRQ implementation.
@@ -379,6 +381,8 @@
__set_irq_handler(irq, handle, 1, NULL);
}
+extern void set_irq_nested_thread(unsigned int irq, int nest);
+
extern void set_irq_noprobe(unsigned int irq);
extern void set_irq_probe(unsigned int irq);
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index ec87b21..7bf89bc 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -41,6 +41,12 @@
; \
else
+#ifdef CONFIG_SMP
+#define irq_node(irq) (irq_to_desc(irq)->node)
+#else
+#define irq_node(irq) 0
+#endif
+
#endif /* CONFIG_GENERIC_HARDIRQS */
#define for_each_irq_nr(irq) \
diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h
new file mode 100644
index 0000000..4b3ecc4
--- /dev/null
+++ b/include/linux/isdn/hdlc.h
@@ -0,0 +1,82 @@
+/*
+ * hdlc.h -- General purpose ISDN HDLC decoder.
+ *
+ * Implementation of a HDLC decoder/encoder in software.
+ * Neccessary because some ISDN devices don't have HDLC
+ * controllers.
+ *
+ * Copyright (C)
+ * 2009 Karsten Keil <keil@b1-systems.de>
+ * 2002 Wolfgang Mües <wolfgang@iksw-muees.de>
+ * 2001 Frode Isaksen <fisaksen@bewan.com>
+ * 2001 Kai Germaschewski <kai.germaschewski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ISDNHDLC_H__
+#define __ISDNHDLC_H__
+
+struct isdnhdlc_vars {
+ int bit_shift;
+ int hdlc_bits1;
+ int data_bits;
+ int ffbit_shift; /* encoding only */
+ int state;
+ int dstpos;
+
+ u16 crc;
+
+ u8 cbin;
+ u8 shift_reg;
+ u8 ffvalue;
+
+ /* set if transferring data */
+ u32 data_received:1;
+ /* set if D channel (send idle instead of flags) */
+ u32 dchannel:1;
+ /* set if 56K adaptation */
+ u32 do_adapt56:1;
+ /* set if in closing phase (need to send CRC + flag) */
+ u32 do_closing:1;
+ /* set if data is bitreverse */
+ u32 do_bitreverse:1;
+};
+
+/* Feature Flags */
+#define HDLC_56KBIT 0x01
+#define HDLC_DCHANNEL 0x02
+#define HDLC_BITREVERSE 0x04
+
+/*
+ The return value from isdnhdlc_decode is
+ the frame length, 0 if no complete frame was decoded,
+ or a negative error number
+*/
+#define HDLC_FRAMING_ERROR 1
+#define HDLC_CRC_ERROR 2
+#define HDLC_LENGTH_ERROR 3
+
+extern void isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, u32 features);
+
+extern int isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src,
+ int slen, int *count, u8 *dst, int dsize);
+
+extern void isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, u32 features);
+
+extern int isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src,
+ u16 slen, int *count, u8 *dst, int dsize);
+
+#endif /* __ISDNHDLC_H__ */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d6320a3..2b5b1e0 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -125,7 +125,7 @@
#endif
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
- void __might_sleep(char *file, int line);
+ void __might_sleep(char *file, int line, int preempt_offset);
/**
* might_sleep - annotation for functions that can sleep
*
@@ -137,8 +137,9 @@
* supposed to.
*/
# define might_sleep() \
- do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0)
+ do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
#else
+ static inline void __might_sleep(char *file, int line, int preempt_offset) { }
# define might_sleep() do { might_resched(); } while (0)
#endif
diff --git a/include/linux/key.h b/include/linux/key.h
index e544f46..cd50dfa 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -129,7 +129,10 @@
struct rw_semaphore sem; /* change vs change sem */
struct key_user *user; /* owner of this key */
void *security; /* security data for this key */
- time_t expiry; /* time at which key expires (or 0) */
+ union {
+ time_t expiry; /* time at which key expires (or 0) */
+ time_t revoked_at; /* time at which key was revoked */
+ };
uid_t uid;
gid_t gid;
key_perm_t perm; /* access permissions */
@@ -275,6 +278,8 @@
extern ctl_table key_sysctls[];
#endif
+extern void key_replace_session_keyring(void);
+
/*
* the userspace interface
*/
@@ -297,6 +302,7 @@
#define key_fsuid_changed(t) do { } while(0)
#define key_fsgid_changed(t) do { } while(0)
#define key_init() do { } while(0)
+#define key_replace_session_keyring() do { } while(0)
#endif /* CONFIG_KEYS */
#endif /* __KERNEL__ */
diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h
index c0688eb..bd383f1 100644
--- a/include/linux/keyctl.h
+++ b/include/linux/keyctl.h
@@ -52,5 +52,6 @@
#define KEYCTL_SET_TIMEOUT 15 /* set key timeout */
#define KEYCTL_ASSUME_AUTHORITY 16 /* assume request_key() authorisation */
#define KEYCTL_GET_SECURITY 17 /* get key security label */
+#define KEYCTL_SESSION_TO_PARENT 18 /* apply session keyring to parent process */
#endif /* _LINUX_KEYCTL_H */
diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h
index 47b39b7..dc2fd54 100644
--- a/include/linux/kmemcheck.h
+++ b/include/linux/kmemcheck.h
@@ -34,6 +34,8 @@
int kmemcheck_show_addr(unsigned long address);
int kmemcheck_hide_addr(unsigned long address);
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
+
#else
#define kmemcheck_enabled 0
@@ -99,6 +101,11 @@
{
}
+static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+ return true;
+}
+
#endif /* CONFIG_KMEMCHECK */
/*
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
index 6a63807..3c7497d 100644
--- a/include/linux/kmemleak.h
+++ b/include/linux/kmemleak.h
@@ -23,18 +23,18 @@
#ifdef CONFIG_DEBUG_KMEMLEAK
-extern void kmemleak_init(void);
+extern void kmemleak_init(void) __ref;
extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
- gfp_t gfp);
-extern void kmemleak_free(const void *ptr);
-extern void kmemleak_free_part(const void *ptr, size_t size);
+ gfp_t gfp) __ref;
+extern void kmemleak_free(const void *ptr) __ref;
+extern void kmemleak_free_part(const void *ptr, size_t size) __ref;
extern void kmemleak_padding(const void *ptr, unsigned long offset,
- size_t size);
-extern void kmemleak_not_leak(const void *ptr);
-extern void kmemleak_ignore(const void *ptr);
+ size_t size) __ref;
+extern void kmemleak_not_leak(const void *ptr) __ref;
+extern void kmemleak_ignore(const void *ptr) __ref;
extern void kmemleak_scan_area(const void *ptr, unsigned long offset,
- size_t length, gfp_t gfp);
-extern void kmemleak_no_scan(const void *ptr);
+ size_t length, gfp_t gfp) __ref;
+extern void kmemleak_no_scan(const void *ptr) __ref;
static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
int min_count, unsigned long flags,
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 3db5d8d..f8f8900 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -14,7 +14,7 @@
#define KVM_API_VERSION 12
-/* for KVM_TRACE_ENABLE */
+/* for KVM_TRACE_ENABLE, deprecated */
struct kvm_user_trace_setup {
__u32 buf_size; /* sub_buffer size of each per-cpu */
__u32 buf_nr; /* the number of sub_buffers of each per-cpu */
@@ -70,6 +70,14 @@
} chip;
};
+/* for KVM_CREATE_PIT2 */
+struct kvm_pit_config {
+ __u32 flags;
+ __u32 pad[15];
+};
+
+#define KVM_PIT_SPEAKER_DUMMY 1
+
#define KVM_EXIT_UNKNOWN 0
#define KVM_EXIT_EXCEPTION 1
#define KVM_EXIT_IO 2
@@ -87,6 +95,10 @@
#define KVM_EXIT_S390_RESET 14
#define KVM_EXIT_DCR 15
#define KVM_EXIT_NMI 16
+#define KVM_EXIT_INTERNAL_ERROR 17
+
+/* For KVM_EXIT_INTERNAL_ERROR */
+#define KVM_INTERNAL_ERROR_EMULATION 1
/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
struct kvm_run {
@@ -173,6 +185,9 @@
__u32 data;
__u8 is_write;
} dcr;
+ struct {
+ __u32 suberror;
+ } internal;
/* Fix the size of the union. */
char padding[256];
};
@@ -292,6 +307,28 @@
struct kvm_guest_debug_arch arch;
};
+enum {
+ kvm_ioeventfd_flag_nr_datamatch,
+ kvm_ioeventfd_flag_nr_pio,
+ kvm_ioeventfd_flag_nr_deassign,
+ kvm_ioeventfd_flag_nr_max,
+};
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
+
+#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1)
+
+struct kvm_ioeventfd {
+ __u64 datamatch;
+ __u64 addr; /* legal pio/mmio address */
+ __u32 len; /* 1, 2, 4, or 8 bytes */
+ __s32 fd;
+ __u32 flags;
+ __u8 pad[36];
+};
+
#define KVM_TRC_SHIFT 16
/*
* kvm trace categories
@@ -310,35 +347,6 @@
#define KVM_TRC_CYCLE_SIZE 8
#define KVM_TRC_EXTRA_MAX 7
-/* This structure represents a single trace buffer record. */
-struct kvm_trace_rec {
- /* variable rec_val
- * is split into:
- * bits 0 - 27 -> event id
- * bits 28 -30 -> number of extra data args of size u32
- * bits 31 -> binary indicator for if tsc is in record
- */
- __u32 rec_val;
- __u32 pid;
- __u32 vcpu_id;
- union {
- struct {
- __u64 timestamp;
- __u32 extra_u32[KVM_TRC_EXTRA_MAX];
- } __attribute__((packed)) timestamp;
- struct {
- __u32 extra_u32[KVM_TRC_EXTRA_MAX];
- } notimestamp;
- } u;
-};
-
-#define TRACE_REC_EVENT_ID(val) \
- (0x0fffffff & (val))
-#define TRACE_REC_NUM_DATA_ARGS(val) \
- (0x70000000 & ((val) << 28))
-#define TRACE_REC_TCS(val) \
- (0x80000000 & ((val) << 31))
-
#define KVMIO 0xAE
/*
@@ -415,6 +423,19 @@
#define KVM_CAP_ASSIGN_DEV_IRQ 29
/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
+#ifdef __KVM_HAVE_MCE
+#define KVM_CAP_MCE 31
+#endif
+#define KVM_CAP_IRQFD 32
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_PIT2 33
+#endif
+#define KVM_CAP_SET_BOOT_CPU_ID 34
+#ifdef __KVM_HAVE_PIT_STATE2
+#define KVM_CAP_PIT_STATE2 35
+#endif
+#define KVM_CAP_IOEVENTFD 36
+#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
#ifdef KVM_CAP_IRQ_ROUTING
@@ -454,15 +475,32 @@
#endif
+#ifdef KVM_CAP_MCE
+/* x86 MCE */
+struct kvm_x86_mce {
+ __u64 status;
+ __u64 addr;
+ __u64 misc;
+ __u64 mcg_status;
+ __u8 bank;
+ __u8 pad1[7];
+ __u64 pad2[3];
+};
+#endif
+
+#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+
+struct kvm_irqfd {
+ __u32 fd;
+ __u32 gsi;
+ __u32 flags;
+ __u8 pad[20];
+};
+
/*
* ioctls for VM fds
*/
#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region)
-#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
-#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
-#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46,\
- struct kvm_userspace_memory_region)
-#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47)
/*
* KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
* a vcpu fd.
@@ -470,6 +508,12 @@
#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
+#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46,\
+ struct kvm_userspace_memory_region)
+#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64)
/* Device model IOC */
#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60)
#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level)
@@ -498,6 +542,10 @@
#define KVM_ASSIGN_SET_MSIX_ENTRY \
_IOW(KVMIO, 0x74, struct kvm_assigned_msix_entry)
#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78)
+#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd)
/*
* ioctls for vcpu fds
@@ -541,6 +589,10 @@
#define KVM_NMI _IO(KVMIO, 0x9a)
/* Available with KVM_CAP_SET_GUEST_DEBUG */
#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug)
+/* MCE for x86 */
+#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64)
+#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64)
+#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce)
/*
* Deprecated interfaces
@@ -563,6 +615,9 @@
#define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *)
#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *)
+#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2)
+
#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02)
#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03)
#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04)
@@ -633,7 +688,7 @@
__u16 padding;
};
-#define KVM_MAX_MSIX_PER_DEV 512
+#define KVM_MAX_MSIX_PER_DEV 256
struct kvm_assigned_msix_entry {
__u32 assigned_dev_id;
__u32 gsi;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 3060bdc3..4af5603 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -42,6 +42,7 @@
#define KVM_USERSPACE_IRQ_SOURCE_ID 0
+struct kvm;
struct kvm_vcpu;
extern struct kmem_cache *kvm_vcpu_cache;
@@ -59,10 +60,18 @@
void kvm_io_bus_init(struct kvm_io_bus *bus);
void kvm_io_bus_destroy(struct kvm_io_bus *bus);
-struct kvm_io_device *kvm_io_bus_find_dev(struct kvm_io_bus *bus,
- gpa_t addr, int len, int is_write);
-void kvm_io_bus_register_dev(struct kvm_io_bus *bus,
- struct kvm_io_device *dev);
+int kvm_io_bus_write(struct kvm_io_bus *bus, gpa_t addr, int len,
+ const void *val);
+int kvm_io_bus_read(struct kvm_io_bus *bus, gpa_t addr, int len,
+ void *val);
+int __kvm_io_bus_register_dev(struct kvm_io_bus *bus,
+ struct kvm_io_device *dev);
+int kvm_io_bus_register_dev(struct kvm *kvm, struct kvm_io_bus *bus,
+ struct kvm_io_device *dev);
+void __kvm_io_bus_unregister_dev(struct kvm_io_bus *bus,
+ struct kvm_io_device *dev);
+void kvm_io_bus_unregister_dev(struct kvm *kvm, struct kvm_io_bus *bus,
+ struct kvm_io_device *dev);
struct kvm_vcpu {
struct kvm *kvm;
@@ -103,7 +112,7 @@
struct {
unsigned long rmap_pde;
int write_count;
- } *lpage_info;
+ } *lpage_info[KVM_NR_PAGE_SIZES - 1];
unsigned long userspace_addr;
int user_alloc;
};
@@ -124,7 +133,6 @@
};
struct kvm {
- struct mutex lock; /* protects the vcpus array and APIC accesses */
spinlock_t mmu_lock;
spinlock_t requests_lock;
struct rw_semaphore slots_lock;
@@ -132,10 +140,23 @@
int nmemslots;
struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS +
KVM_PRIVATE_MEM_SLOTS];
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+ u32 bsp_vcpu_id;
+ struct kvm_vcpu *bsp_vcpu;
+#endif
struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
+ atomic_t online_vcpus;
struct list_head vm_list;
+ struct mutex lock;
struct kvm_io_bus mmio_bus;
struct kvm_io_bus pio_bus;
+#ifdef CONFIG_HAVE_KVM_EVENTFD
+ struct {
+ spinlock_t lock;
+ struct list_head items;
+ } irqfds;
+ struct list_head ioeventfds;
+#endif
struct kvm_vm_stat stat;
struct kvm_arch arch;
atomic_t users_count;
@@ -144,6 +165,7 @@
struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
#endif
+ struct mutex irq_lock;
#ifdef CONFIG_HAVE_KVM_IRQCHIP
struct list_head irq_routing; /* of kvm_kernel_irq_routing_entry */
struct hlist_head mask_notifier_list;
@@ -167,6 +189,17 @@
#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
+static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
+{
+ smp_rmb();
+ return kvm->vcpus[i];
+}
+
+#define kvm_for_each_vcpu(idx, vcpup, kvm) \
+ for (idx = 0, vcpup = kvm_get_vcpu(kvm, idx); \
+ idx < atomic_read(&kvm->online_vcpus) && vcpup; \
+ vcpup = kvm_get_vcpu(kvm, ++idx))
+
int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id);
void kvm_vcpu_uninit(struct kvm_vcpu *vcpu);
@@ -201,6 +234,7 @@
struct kvm_userspace_memory_region *mem,
struct kvm_memory_slot old,
int user_alloc);
+void kvm_disable_largepages(void);
void kvm_arch_flush_shadow(struct kvm *kvm);
gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn);
struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn);
@@ -243,8 +277,6 @@
unsigned int ioctl, unsigned long arg);
long kvm_arch_vcpu_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg);
-void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
-void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu);
int kvm_dev_ioctl_check_extension(long ext);
@@ -300,7 +332,6 @@
void kvm_arch_hardware_unsetup(void);
void kvm_arch_check_processor_compat(void *rtn);
int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
void kvm_free_physmem(struct kvm *kvm);
@@ -309,8 +340,6 @@
void kvm_free_all_assigned_devices(struct kvm *kvm);
void kvm_arch_sync_events(struct kvm *kvm);
-int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
-int kvm_cpu_has_interrupt(struct kvm_vcpu *v);
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu);
void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
@@ -366,7 +395,8 @@
void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin);
void kvm_register_irq_ack_notifier(struct kvm *kvm,
struct kvm_irq_ack_notifier *kian);
-void kvm_unregister_irq_ack_notifier(struct kvm_irq_ack_notifier *kian);
+void kvm_unregister_irq_ack_notifier(struct kvm *kvm,
+ struct kvm_irq_ack_notifier *kian);
int kvm_request_irq_source_id(struct kvm *kvm);
void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id);
@@ -459,37 +489,6 @@
extern struct kvm_stats_debugfs_item debugfs_entries[];
extern struct dentry *kvm_debugfs_dir;
-#define KVMTRACE_5D(evt, vcpu, d1, d2, d3, d4, d5, name) \
- trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
- vcpu, 5, d1, d2, d3, d4, d5)
-#define KVMTRACE_4D(evt, vcpu, d1, d2, d3, d4, name) \
- trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
- vcpu, 4, d1, d2, d3, d4, 0)
-#define KVMTRACE_3D(evt, vcpu, d1, d2, d3, name) \
- trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
- vcpu, 3, d1, d2, d3, 0, 0)
-#define KVMTRACE_2D(evt, vcpu, d1, d2, name) \
- trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
- vcpu, 2, d1, d2, 0, 0, 0)
-#define KVMTRACE_1D(evt, vcpu, d1, name) \
- trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
- vcpu, 1, d1, 0, 0, 0, 0)
-#define KVMTRACE_0D(evt, vcpu, name) \
- trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
- vcpu, 0, 0, 0, 0, 0, 0)
-
-#ifdef CONFIG_KVM_TRACE
-int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg);
-void kvm_trace_cleanup(void);
-#else
-static inline
-int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg)
-{
- return -EINVAL;
-}
-#define kvm_trace_cleanup() ((void)0)
-#endif
-
#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq)
{
@@ -525,4 +524,33 @@
#endif
+#ifdef CONFIG_HAVE_KVM_EVENTFD
+
+void kvm_eventfd_init(struct kvm *kvm);
+int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+void kvm_irqfd_release(struct kvm *kvm);
+int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
+
+#else
+
+static inline void kvm_eventfd_init(struct kvm *kvm) {}
+static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+{
+ return -EINVAL;
+}
+
+static inline void kvm_irqfd_release(struct kvm *kvm) {}
+static inline int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
+{
+ return -ENOSYS;
+}
+
+#endif /* CONFIG_HAVE_KVM_EVENTFD */
+
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu)
+{
+ return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id;
+}
+#endif
#endif
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
index 3ddce03..d731092 100644
--- a/include/linux/kvm_para.h
+++ b/include/linux/kvm_para.h
@@ -13,6 +13,7 @@
#define KVM_ENOSYS 1000
#define KVM_EFAULT EFAULT
#define KVM_E2BIG E2BIG
+#define KVM_EPERM EPERM
#define KVM_HC_VAPIC_POLL_IRQ 1
#define KVM_HC_MMU_OP 2
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e5b6e33..76319bf 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -143,7 +143,6 @@
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */
- ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */
ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */
ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */
@@ -190,6 +189,7 @@
ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
ATA_FLAG_DEBUGMSG = (1 << 13),
+ ATA_FLAG_FPDMA_AA = (1 << 14), /* driver supports Auto-Activate */
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
@@ -386,6 +386,7 @@
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
+ ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
index c46c895..2442e3f 100644
--- a/include/linux/lmb.h
+++ b/include/linux/lmb.h
@@ -51,7 +51,7 @@
extern u64 __init __lmb_alloc_base(u64 size,
u64 align, u64 max_addr);
extern u64 __init lmb_phys_mem_size(void);
-extern u64 __init lmb_end_of_DRAM(void);
+extern u64 lmb_end_of_DRAM(void);
extern void __init lmb_enforce_memory_limit(u64 memory_limit);
extern int __init lmb_is_reserved(u64 addr);
extern int lmb_find(struct lmb_property *res);
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index b25d1b5..9ccf0e2 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -149,6 +149,12 @@
struct lock_class *class;
struct stack_trace trace;
int distance;
+
+ /*
+ * The parent field is used to implement breadth-first search, and the
+ * bit 0 is reused to indicate if the lock has been accessed in BFS.
+ */
+ struct lock_list *parent;
};
/*
@@ -208,10 +214,12 @@
* interrupt context:
*/
unsigned int irq_context:2; /* bit 0 - soft, bit 1 - hard */
- unsigned int trylock:1;
+ unsigned int trylock:1; /* 16 bits */
+
unsigned int read:2; /* see lock_acquire() comment */
unsigned int check:2; /* see lock_acquire() comment */
unsigned int hardirqs_off:1;
+ unsigned int references:11; /* 32 bits */
};
/*
@@ -291,6 +299,10 @@
extern void lock_release(struct lockdep_map *lock, int nested,
unsigned long ip);
+#define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
+
+extern int lock_is_held(struct lockdep_map *lock);
+
extern void lock_set_class(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, unsigned int subclass,
unsigned long ip);
@@ -309,6 +321,8 @@
#define lockdep_depth(tsk) (debug_locks ? (tsk)->lockdep_depth : 0)
+#define lockdep_assert_held(l) WARN_ON(debug_locks && !lockdep_is_held(l))
+
#else /* !LOCKDEP */
static inline void lockdep_off(void)
@@ -353,6 +367,8 @@
#define lockdep_depth(tsk) (0)
+#define lockdep_assert_held(l) do { } while (0)
+
#endif /* !LOCKDEP */
#ifdef CONFIG_LOCK_STAT
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index e461b2c..190c378 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -33,6 +33,7 @@
#define LSM_AUDIT_DATA_IPC 4
#define LSM_AUDIT_DATA_TASK 5
#define LSM_AUDIT_DATA_KEY 6
+#define LSM_AUDIT_NO_AUDIT 7
struct task_struct *tsk;
union {
struct {
@@ -66,16 +67,19 @@
} key_struct;
#endif
} u;
- const char *function;
/* this union contains LSM specific data */
union {
+#ifdef CONFIG_SECURITY_SMACK
/* SMACK data */
struct smack_audit_data {
+ const char *function;
char *subject;
char *object;
char *request;
int result;
} smack_audit_data;
+#endif
+#ifdef CONFIG_SECURITY_SELINUX
/* SELinux data */
struct {
u32 ssid;
@@ -83,10 +87,12 @@
u16 tclass;
u32 requested;
u32 audited;
+ u32 denied;
struct av_decision *avd;
int result;
} selinux_audit_data;
- } lsm_priv;
+#endif
+ };
/* these callback will be implemented by a specific LSM */
void (*lsm_pre_audit)(struct audit_buffer *, void *);
void (*lsm_post_audit)(struct audit_buffer *, void *);
@@ -104,7 +110,7 @@
/* Initialize an LSM audit data structure. */
#define COMMON_AUDIT_DATA_INIT(_d, _t) \
{ memset((_d), 0, sizeof(struct common_audit_data)); \
- (_d)->type = LSM_AUDIT_DATA_##_t; (_d)->function = __func__; }
+ (_d)->type = LSM_AUDIT_DATA_##_t; }
void common_lsm_audit(struct common_audit_data *a);
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
index 7f9831d..4af8414 100644
--- a/include/linux/mISDNhw.h
+++ b/include/linux/mISDNhw.h
@@ -168,6 +168,7 @@
extern int mISDN_initdchannel(struct dchannel *, int, void *);
extern int mISDN_initbchannel(struct bchannel *, int);
extern int mISDN_freedchannel(struct dchannel *);
+extern void mISDN_clear_bchannel(struct bchannel *);
extern int mISDN_freebchannel(struct bchannel *);
extern void queue_ch_frame(struct mISDNchannel *, u_int,
int, struct sk_buff *);
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 45100b3..536ca12 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -37,7 +37,7 @@
*/
#define MISDN_MAJOR_VERSION 1
#define MISDN_MINOR_VERSION 1
-#define MISDN_RELEASE 20
+#define MISDN_RELEASE 21
/* primitives for information exchange
* generell format
@@ -153,6 +153,18 @@
#define HFC_VOL_CHANGE_RX 0x2602
#define HFC_SPL_LOOP_ON 0x2603
#define HFC_SPL_LOOP_OFF 0x2604
+/* for T30 FAX and analog modem */
+#define HW_MOD_FRM 0x4000
+#define HW_MOD_FRH 0x4001
+#define HW_MOD_FTM 0x4002
+#define HW_MOD_FTH 0x4003
+#define HW_MOD_FTS 0x4004
+#define HW_MOD_CONNECT 0x4010
+#define HW_MOD_OK 0x4011
+#define HW_MOD_NOCARR 0x4012
+#define HW_MOD_FCERROR 0x4013
+#define HW_MOD_READY 0x4014
+#define HW_MOD_LASTDATA 0x4015
/* DSP_TONE_PATT_ON parameter */
#define TONE_OFF 0x0000
@@ -224,6 +236,8 @@
#define ISDN_P_B_L2DTMF 0x24
#define ISDN_P_B_L2DSP 0x25
#define ISDN_P_B_L2DSPHDLC 0x26
+#define ISDN_P_B_T30_FAX 0x27
+#define ISDN_P_B_MODEM_ASYNC 0x28
#define OPTION_L2_PMX 1
#define OPTION_L2_PTP 2
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index cfdf1df..c779b49 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -304,7 +304,7 @@
*/
struct mdio_if_info {
int prtad;
- u32 __bitwise mmds;
+ u32 mmds;
unsigned mode_support;
struct net_device *dev;
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 39751c8..2dbfb5a 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -22,6 +22,12 @@
/*
* Vendors and devices. Sort key: vendor first, device next.
*/
+#define SDIO_VENDOR_ID_INTEL 0x0089
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403
+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404
+#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405
+#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406
#define SDIO_VENDOR_ID_MARVELL 0x02df
#define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
diff --git a/include/linux/module.h b/include/linux/module.h
index 098bdb7..f8f92d0 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -17,10 +17,12 @@
#include <linux/moduleparam.h>
#include <linux/marker.h>
#include <linux/tracepoint.h>
-#include <asm/local.h>
+#include <asm/local.h>
#include <asm/module.h>
+#include <trace/events/module.h>
+
/* Not Yet Implemented */
#define MODULE_SUPPORTED_DEVICE(name)
@@ -462,7 +464,10 @@
static inline void __module_get(struct module *module)
{
if (module) {
- local_inc(__module_ref_addr(module, get_cpu()));
+ unsigned int cpu = get_cpu();
+ local_inc(__module_ref_addr(module, cpu));
+ trace_module_get(module, _THIS_IP_,
+ local_read(__module_ref_addr(module, cpu)));
put_cpu();
}
}
@@ -473,8 +478,11 @@
if (module) {
unsigned int cpu = get_cpu();
- if (likely(module_is_live(module)))
+ if (likely(module_is_live(module))) {
local_inc(__module_ref_addr(module, cpu));
+ trace_module_get(module, _THIS_IP_,
+ local_read(__module_ref_addr(module, cpu)));
+ }
else
ret = 0;
put_cpu();
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
index 3ceb0cc..2a73946 100644
--- a/include/linux/net_dropmon.h
+++ b/include/linux/net_dropmon.h
@@ -3,7 +3,6 @@
#include <linux/types.h>
#include <linux/netlink.h>
-#include <linux/types.h>
struct net_dm_drop_point {
__u8 pc[8];
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index d4a4d98..65ee192 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -72,10 +72,6 @@
/* Backlog congestion levels */
#define NET_RX_SUCCESS 0 /* keep 'em coming, baby */
#define NET_RX_DROP 1 /* packet dropped */
-#define NET_RX_CN_LOW 2 /* storm alert, just in case */
-#define NET_RX_CN_MOD 3 /* Storm on its way! */
-#define NET_RX_CN_HIGH 4 /* The storm is here */
-#define NET_RX_BAD 5 /* packet dropped due to kernel error */
/* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It
* indicates that the device will soon be dropping packets, or already drops
@@ -83,17 +79,19 @@
#define net_xmit_eval(e) ((e) == NET_XMIT_CN? 0 : (e))
#define net_xmit_errno(e) ((e) != NET_XMIT_CN ? -ENOBUFS : 0)
+/* Driver transmit return codes */
+enum netdev_tx {
+ NETDEV_TX_OK = 0, /* driver took care of packet */
+ NETDEV_TX_BUSY, /* driver tx path was busy*/
+ NETDEV_TX_LOCKED = -1, /* driver tx lock was already taken */
+};
+typedef enum netdev_tx netdev_tx_t;
+
#endif
#define MAX_ADDR_LEN 32 /* Largest hardware address length */
-/* Driver transmit return codes */
-#define NETDEV_TX_OK 0 /* driver took care of packet */
-#define NETDEV_TX_BUSY 1 /* driver tx path was busy*/
-#define NETDEV_TX_LOCKED -1 /* driver tx lock was already taken */
-
#ifdef __KERNEL__
-
/*
* Compute the worst case header length according to the protocols
* used.
@@ -511,9 +509,11 @@
* This function is called when network device transistions to the down
* state.
*
- * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
+ * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb,
+ * struct net_device *dev);
* Called when a packet needs to be transmitted.
- * Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED,
+ * Must return NETDEV_TX_OK , NETDEV_TX_BUSY.
+ * (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX)
* Required can not be NULL.
*
* u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb);
@@ -584,7 +584,7 @@
void (*ndo_uninit)(struct net_device *dev);
int (*ndo_open)(struct net_device *dev);
int (*ndo_stop)(struct net_device *dev);
- int (*ndo_start_xmit) (struct sk_buff *skb,
+ netdev_tx_t (*ndo_start_xmit) (struct sk_buff *skb,
struct net_device *dev);
u16 (*ndo_select_queue)(struct net_device *dev,
struct sk_buff *skb);
@@ -627,6 +627,8 @@
void (*ndo_poll_controller)(struct net_device *dev);
#endif
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ int (*ndo_fcoe_enable)(struct net_device *dev);
+ int (*ndo_fcoe_disable)(struct net_device *dev);
int (*ndo_fcoe_ddp_setup)(struct net_device *dev,
u16 xid,
struct scatterlist *sgl,
@@ -705,6 +707,7 @@
/* the GSO_MASK reserves bits 16 through 23 */
#define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */
#define NETIF_F_SCTP_CSUM (1 << 25) /* SCTP checksum offload */
+#define NETIF_F_FCOE_MTU (1 << 26) /* Supports max FCoE MTU, 2158 bytes*/
/* Segmentation offload features */
#define NETIF_F_GSO_SHIFT 16
@@ -829,6 +832,9 @@
/* Number of TX queues currently active in device */
unsigned int real_num_tx_queues;
+ /* root qdisc from userspace point of view */
+ struct Qdisc *qdisc;
+
unsigned long tx_queue_len; /* Max frames per queue allowed */
spinlock_t tx_global_lock;
/*
@@ -992,6 +998,12 @@
*/
#define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev))
+/* Set the sysfs device type for the network logical device to allow
+ * fin grained indentification of different network device types. For
+ * example Ethernet, Wirelss LAN, Bluetooth, WiMAX etc.
+ */
+#define SET_NETDEV_DEVTYPE(net, devtype) ((net)->dev.type = (devtype))
+
/**
* netif_napi_add - initialize a napi context
* @dev: network device
@@ -1260,7 +1272,7 @@
{
#ifdef CONFIG_NETPOLL_TRAP
if (netpoll_trap()) {
- clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+ netif_tx_start_queue(dev_queue);
return;
}
#endif
@@ -1366,7 +1378,8 @@
static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
{
struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
- clear_bit(__QUEUE_STATE_XOFF, &txq->state);
+
+ netif_tx_start_queue(txq);
}
/**
@@ -1383,7 +1396,7 @@
if (netpoll_trap())
return;
#endif
- set_bit(__QUEUE_STATE_XOFF, &txq->state);
+ netif_tx_stop_queue(txq);
}
/**
@@ -1397,7 +1410,8 @@
u16 queue_index)
{
struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
- return test_bit(__QUEUE_STATE_XOFF, &txq->state);
+
+ return netif_tx_queue_stopped(txq);
}
static inline int netif_subqueue_stopped(const struct net_device *dev,
@@ -1749,8 +1763,7 @@
* force a schedule.
*/
clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
- if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
- __netif_schedule(txq->qdisc);
+ netif_schedule_queue(txq);
}
spin_unlock(&dev->tx_global_lock);
}
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index bff4d57..9f00da2 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -58,7 +58,8 @@
struct nfnl_callback
{
int (*call)(struct sock *nl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[]);
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[]);
const struct nla_policy *policy; /* netlink attribute policy */
const u_int16_t attr_count; /* number of nlattr's */
};
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 1030b75..812cb15 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -238,9 +238,9 @@
*/
struct xt_target_param {
const struct net_device *in, *out;
- unsigned int hooknum;
const struct xt_target *target;
const void *targinfo;
+ unsigned int hooknum;
u_int8_t family;
};
@@ -407,7 +407,7 @@
unsigned int size, u_int8_t proto, bool inv_proto);
extern struct xt_table *xt_register_table(struct net *net,
- struct xt_table *table,
+ const struct xt_table *table,
struct xt_table_info *bootstrap,
struct xt_table_info *newinfo);
extern void *xt_unregister_table(struct xt_table *table);
diff --git a/include/linux/netfilter/xt_CONNMARK.h b/include/linux/netfilter/xt_CONNMARK.h
index 7635c8f..0a85458 100644
--- a/include/linux/netfilter/xt_CONNMARK.h
+++ b/include/linux/netfilter/xt_CONNMARK.h
@@ -18,12 +18,6 @@
XT_CONNMARK_RESTORE
};
-struct xt_connmark_target_info {
- unsigned long mark;
- unsigned long mask;
- __u8 mode;
-};
-
struct xt_connmark_tginfo1 {
__u32 ctmark, ctmask, nfmask;
__u8 mode;
diff --git a/include/linux/netfilter/xt_MARK.h b/include/linux/netfilter/xt_MARK.h
index 028304b..bc9561b 100644
--- a/include/linux/netfilter/xt_MARK.h
+++ b/include/linux/netfilter/xt_MARK.h
@@ -3,23 +3,6 @@
#include <linux/types.h>
-/* Version 0 */
-struct xt_mark_target_info {
- unsigned long mark;
-};
-
-/* Version 1 */
-enum {
- XT_MARK_SET=0,
- XT_MARK_AND,
- XT_MARK_OR,
-};
-
-struct xt_mark_target_info_v1 {
- unsigned long mark;
- __u8 mode;
-};
-
struct xt_mark_tginfo2 {
__u32 mark, mask;
};
diff --git a/include/linux/netfilter/xt_connmark.h b/include/linux/netfilter/xt_connmark.h
index 571e266..619e47c 100644
--- a/include/linux/netfilter/xt_connmark.h
+++ b/include/linux/netfilter/xt_connmark.h
@@ -12,11 +12,6 @@
* (at your option) any later version.
*/
-struct xt_connmark_info {
- unsigned long mark, mask;
- __u8 invert;
-};
-
struct xt_connmark_mtinfo1 {
__u32 mark, mask;
__u8 invert;
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 7ae0533..54f47a2 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -32,42 +32,6 @@
XT_CONNTRACK_DIRECTION = 1 << 12,
};
-/* This is exposed to userspace, so remains frozen in time. */
-struct ip_conntrack_old_tuple
-{
- struct {
- __be32 ip;
- union {
- __u16 all;
- } u;
- } src;
-
- struct {
- __be32 ip;
- union {
- __u16 all;
- } u;
-
- /* The protocol. */
- __u16 protonum;
- } dst;
-};
-
-struct xt_conntrack_info
-{
- unsigned int statemask, statusmask;
-
- struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX];
- struct in_addr sipmsk[IP_CT_DIR_MAX], dipmsk[IP_CT_DIR_MAX];
-
- unsigned long expires_min, expires_max;
-
- /* Flags word */
- __u8 flags;
- /* Inverse flags */
- __u8 invflags;
-};
-
struct xt_conntrack_mtinfo1 {
union nf_inet_addr origsrc_addr, origsrc_mask;
union nf_inet_addr origdst_addr, origdst_mask;
diff --git a/include/linux/netfilter/xt_mark.h b/include/linux/netfilter/xt_mark.h
index 6fa460a..6607c8f 100644
--- a/include/linux/netfilter/xt_mark.h
+++ b/include/linux/netfilter/xt_mark.h
@@ -3,11 +3,6 @@
#include <linux/types.h>
-struct xt_mark_info {
- unsigned long mark, mask;
- __u8 invert;
-};
-
struct xt_mark_mtinfo1 {
__u32 mark, mask;
__u8 invert;
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index 590ac3d..6fe3e6a 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -265,7 +265,7 @@
}
extern struct xt_table *arpt_register_table(struct net *net,
- struct xt_table *table,
+ const struct xt_table *table,
const struct arpt_replace *repl);
extern void arpt_unregister_table(struct xt_table *table);
extern unsigned int arpt_do_table(struct sk_buff *skb,
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index e40ddb9..ea281e6 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -301,7 +301,7 @@
#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
~(__alignof__(struct ebt_replace)-1))
extern struct ebt_table *ebt_register_table(struct net *net,
- struct ebt_table *table);
+ const struct ebt_table *table);
extern void ebt_unregister_table(struct ebt_table *table);
extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff *skb,
const struct net_device *in, const struct net_device *out,
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
index 3a7105b..431b407 100644
--- a/include/linux/netfilter_ipv4/Kbuild
+++ b/include/linux/netfilter_ipv4/Kbuild
@@ -1,46 +1,14 @@
-header-y += ipt_CLASSIFY.h
header-y += ipt_CLUSTERIP.h
-header-y += ipt_CONNMARK.h
-header-y += ipt_DSCP.h
header-y += ipt_ECN.h
header-y += ipt_LOG.h
-header-y += ipt_MARK.h
-header-y += ipt_NFQUEUE.h
header-y += ipt_REJECT.h
header-y += ipt_SAME.h
-header-y += ipt_TCPMSS.h
-header-y += ipt_TOS.h
header-y += ipt_TTL.h
header-y += ipt_ULOG.h
header-y += ipt_addrtype.h
header-y += ipt_ah.h
-header-y += ipt_comment.h
-header-y += ipt_connbytes.h
-header-y += ipt_connmark.h
-header-y += ipt_conntrack.h
-header-y += ipt_dccp.h
-header-y += ipt_dscp.h
header-y += ipt_ecn.h
-header-y += ipt_esp.h
-header-y += ipt_hashlimit.h
-header-y += ipt_helper.h
-header-y += ipt_iprange.h
-header-y += ipt_length.h
-header-y += ipt_limit.h
-header-y += ipt_mac.h
-header-y += ipt_mark.h
-header-y += ipt_multiport.h
-header-y += ipt_owner.h
-header-y += ipt_physdev.h
-header-y += ipt_pkttype.h
-header-y += ipt_policy.h
header-y += ipt_realm.h
-header-y += ipt_recent.h
-header-y += ipt_sctp.h
-header-y += ipt_state.h
-header-y += ipt_string.h
-header-y += ipt_tcpmss.h
-header-y += ipt_tos.h
header-y += ipt_ttl.h
unifdef-y += ip_queue.h
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index 092bd50..61fafc8 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -245,7 +245,7 @@
extern void ipt_init(void) __init;
extern struct xt_table *ipt_register_table(struct net *net,
- struct xt_table *table,
+ const struct xt_table *table,
const struct ipt_replace *repl);
extern void ipt_unregister_table(struct xt_table *table);
diff --git a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h b/include/linux/netfilter_ipv4/ipt_CLASSIFY.h
deleted file mode 100644
index a46d511..0000000
--- a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_CLASSIFY_H
-#define _IPT_CLASSIFY_H
-
-#include <linux/netfilter/xt_CLASSIFY.h>
-#define ipt_classify_target_info xt_classify_target_info
-
-#endif /*_IPT_CLASSIFY_H */
diff --git a/include/linux/netfilter_ipv4/ipt_CONNMARK.h b/include/linux/netfilter_ipv4/ipt_CONNMARK.h
deleted file mode 100644
index 9ecfee0..0000000
--- a/include/linux/netfilter_ipv4/ipt_CONNMARK.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _IPT_CONNMARK_H_target
-#define _IPT_CONNMARK_H_target
-
-/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
- * by Henrik Nordstrom <hno@marasystems.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/netfilter/xt_CONNMARK.h>
-#define IPT_CONNMARK_SET XT_CONNMARK_SET
-#define IPT_CONNMARK_SAVE XT_CONNMARK_SAVE
-#define IPT_CONNMARK_RESTORE XT_CONNMARK_RESTORE
-
-#define ipt_connmark_target_info xt_connmark_target_info
-
-#endif /*_IPT_CONNMARK_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_DSCP.h b/include/linux/netfilter_ipv4/ipt_DSCP.h
deleted file mode 100644
index 3491e52..0000000
--- a/include/linux/netfilter_ipv4/ipt_DSCP.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* iptables module for setting the IPv4 DSCP field
- *
- * (C) 2002 Harald Welte <laforge@gnumonks.org>
- * based on ipt_FTOS.c (C) 2000 by Matthew G. Marsh <mgm@paktronix.com>
- * This software is distributed under GNU GPL v2, 1991
- *
- * See RFC2474 for a description of the DSCP field within the IP Header.
- *
- * ipt_DSCP.h,v 1.7 2002/03/14 12:03:13 laforge Exp
-*/
-#ifndef _IPT_DSCP_TARGET_H
-#define _IPT_DSCP_TARGET_H
-#include <linux/netfilter_ipv4/ipt_dscp.h>
-#include <linux/netfilter/xt_DSCP.h>
-
-#define ipt_DSCP_info xt_DSCP_info
-
-#endif /* _IPT_DSCP_TARGET_H */
diff --git a/include/linux/netfilter_ipv4/ipt_ECN.h b/include/linux/netfilter_ipv4/ipt_ECN.h
index 94e0d98..7ca4591 100644
--- a/include/linux/netfilter_ipv4/ipt_ECN.h
+++ b/include/linux/netfilter_ipv4/ipt_ECN.h
@@ -8,9 +8,9 @@
*/
#ifndef _IPT_ECN_TARGET_H
#define _IPT_ECN_TARGET_H
-#include <linux/netfilter_ipv4/ipt_DSCP.h>
+#include <linux/netfilter/xt_DSCP.h>
-#define IPT_ECN_IP_MASK (~IPT_DSCP_MASK)
+#define IPT_ECN_IP_MASK (~XT_DSCP_MASK)
#define IPT_ECN_OP_SET_IP 0x01 /* set ECN bits of IPv4 header */
#define IPT_ECN_OP_SET_ECE 0x10 /* set ECE bit of TCP header */
diff --git a/include/linux/netfilter_ipv4/ipt_MARK.h b/include/linux/netfilter_ipv4/ipt_MARK.h
deleted file mode 100644
index 697a486..0000000
--- a/include/linux/netfilter_ipv4/ipt_MARK.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _IPT_MARK_H_target
-#define _IPT_MARK_H_target
-
-/* Backwards compatibility for old userspace */
-
-#include <linux/netfilter/xt_MARK.h>
-
-/* Version 0 */
-#define ipt_mark_target_info xt_mark_target_info
-
-/* Version 1 */
-#define IPT_MARK_SET XT_MARK_SET
-#define IPT_MARK_AND XT_MARK_AND
-#define IPT_MARK_OR XT_MARK_OR
-
-#define ipt_mark_target_info_v1 xt_mark_target_info_v1
-
-#endif /*_IPT_MARK_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_NFQUEUE.h b/include/linux/netfilter_ipv4/ipt_NFQUEUE.h
deleted file mode 100644
index 97a2a75..0000000
--- a/include/linux/netfilter_ipv4/ipt_NFQUEUE.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* iptables module for using NFQUEUE mechanism
- *
- * (C) 2005 Harald Welte <laforge@netfilter.org>
- *
- * This software is distributed under GNU GPL v2, 1991
- *
-*/
-#ifndef _IPT_NFQ_TARGET_H
-#define _IPT_NFQ_TARGET_H
-
-/* Backwards compatibility for old userspace */
-#include <linux/netfilter/xt_NFQUEUE.h>
-
-#define ipt_NFQ_info xt_NFQ_info
-
-#endif /* _IPT_DSCP_TARGET_H */
diff --git a/include/linux/netfilter_ipv4/ipt_TCPMSS.h b/include/linux/netfilter_ipv4/ipt_TCPMSS.h
deleted file mode 100644
index 7a850f9..0000000
--- a/include/linux/netfilter_ipv4/ipt_TCPMSS.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _IPT_TCPMSS_H
-#define _IPT_TCPMSS_H
-
-#include <linux/netfilter/xt_TCPMSS.h>
-
-#define ipt_tcpmss_info xt_tcpmss_info
-#define IPT_TCPMSS_CLAMP_PMTU XT_TCPMSS_CLAMP_PMTU
-
-#endif /*_IPT_TCPMSS_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_TOS.h b/include/linux/netfilter_ipv4/ipt_TOS.h
deleted file mode 100644
index 6bf9e1f..0000000
--- a/include/linux/netfilter_ipv4/ipt_TOS.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _IPT_TOS_H_target
-#define _IPT_TOS_H_target
-
-#ifndef IPTOS_NORMALSVC
-#define IPTOS_NORMALSVC 0
-#endif
-
-struct ipt_tos_target_info {
- u_int8_t tos;
-};
-
-#endif /*_IPT_TOS_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_comment.h b/include/linux/netfilter_ipv4/ipt_comment.h
deleted file mode 100644
index ae2afc2..0000000
--- a/include/linux/netfilter_ipv4/ipt_comment.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _IPT_COMMENT_H
-#define _IPT_COMMENT_H
-
-#include <linux/netfilter/xt_comment.h>
-
-#define IPT_MAX_COMMENT_LEN XT_MAX_COMMENT_LEN
-
-#define ipt_comment_info xt_comment_info
-
-#endif /* _IPT_COMMENT_H */
diff --git a/include/linux/netfilter_ipv4/ipt_connbytes.h b/include/linux/netfilter_ipv4/ipt_connbytes.h
deleted file mode 100644
index f63e6ee..0000000
--- a/include/linux/netfilter_ipv4/ipt_connbytes.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _IPT_CONNBYTES_H
-#define _IPT_CONNBYTES_H
-
-#include <linux/netfilter/xt_connbytes.h>
-#define ipt_connbytes_what xt_connbytes_what
-
-#define IPT_CONNBYTES_PKTS XT_CONNBYTES_PKTS
-#define IPT_CONNBYTES_BYTES XT_CONNBYTES_BYTES
-#define IPT_CONNBYTES_AVGPKT XT_CONNBYTES_AVGPKT
-
-#define ipt_connbytes_direction xt_connbytes_direction
-#define IPT_CONNBYTES_DIR_ORIGINAL XT_CONNBYTES_DIR_ORIGINAL
-#define IPT_CONNBYTES_DIR_REPLY XT_CONNBYTES_DIR_REPLY
-#define IPT_CONNBYTES_DIR_BOTH XT_CONNBYTES_DIR_BOTH
-
-#define ipt_connbytes_info xt_connbytes_info
-
-#endif
diff --git a/include/linux/netfilter_ipv4/ipt_connmark.h b/include/linux/netfilter_ipv4/ipt_connmark.h
deleted file mode 100644
index c7ba656..0000000
--- a/include/linux/netfilter_ipv4/ipt_connmark.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_CONNMARK_H
-#define _IPT_CONNMARK_H
-
-#include <linux/netfilter/xt_connmark.h>
-#define ipt_connmark_info xt_connmark_info
-
-#endif /*_IPT_CONNMARK_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_conntrack.h b/include/linux/netfilter_ipv4/ipt_conntrack.h
deleted file mode 100644
index cde6762..0000000
--- a/include/linux/netfilter_ipv4/ipt_conntrack.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Header file for kernel module to match connection tracking information.
- * GPL (C) 2001 Marc Boucher (marc@mbsi.ca).
- */
-
-#ifndef _IPT_CONNTRACK_H
-#define _IPT_CONNTRACK_H
-
-#include <linux/netfilter/xt_conntrack.h>
-
-#define IPT_CONNTRACK_STATE_BIT(ctinfo) XT_CONNTRACK_STATE_BIT(ctinfo)
-#define IPT_CONNTRACK_STATE_INVALID XT_CONNTRACK_STATE_INVALID
-
-#define IPT_CONNTRACK_STATE_SNAT XT_CONNTRACK_STATE_SNAT
-#define IPT_CONNTRACK_STATE_DNAT XT_CONNTRACK_STATE_DNAT
-#define IPT_CONNTRACK_STATE_UNTRACKED XT_CONNTRACK_STATE_UNTRACKED
-
-/* flags, invflags: */
-#define IPT_CONNTRACK_STATE XT_CONNTRACK_STATE
-#define IPT_CONNTRACK_PROTO XT_CONNTRACK_PROTO
-#define IPT_CONNTRACK_ORIGSRC XT_CONNTRACK_ORIGSRC
-#define IPT_CONNTRACK_ORIGDST XT_CONNTRACK_ORIGDST
-#define IPT_CONNTRACK_REPLSRC XT_CONNTRACK_REPLSRC
-#define IPT_CONNTRACK_REPLDST XT_CONNTRACK_REPLDST
-#define IPT_CONNTRACK_STATUS XT_CONNTRACK_STATUS
-#define IPT_CONNTRACK_EXPIRES XT_CONNTRACK_EXPIRES
-
-#define ipt_conntrack_info xt_conntrack_info
-#endif /*_IPT_CONNTRACK_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_dccp.h b/include/linux/netfilter_ipv4/ipt_dccp.h
deleted file mode 100644
index e70d11e..0000000
--- a/include/linux/netfilter_ipv4/ipt_dccp.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _IPT_DCCP_H_
-#define _IPT_DCCP_H_
-
-#include <linux/netfilter/xt_dccp.h>
-#define IPT_DCCP_SRC_PORTS XT_DCCP_SRC_PORTS
-#define IPT_DCCP_DEST_PORTS XT_DCCP_DEST_PORTS
-#define IPT_DCCP_TYPE XT_DCCP_TYPE
-#define IPT_DCCP_OPTION XT_DCCP_OPTION
-
-#define IPT_DCCP_VALID_FLAGS XT_DCCP_VALID_FLAGS
-
-#define ipt_dccp_info xt_dccp_info
-
-#endif /* _IPT_DCCP_H_ */
-
diff --git a/include/linux/netfilter_ipv4/ipt_dscp.h b/include/linux/netfilter_ipv4/ipt_dscp.h
deleted file mode 100644
index 4b82ca9..0000000
--- a/include/linux/netfilter_ipv4/ipt_dscp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* iptables module for matching the IPv4 DSCP field
- *
- * (C) 2002 Harald Welte <laforge@gnumonks.org>
- * This software is distributed under GNU GPL v2, 1991
- *
- * See RFC2474 for a description of the DSCP field within the IP Header.
- *
- * ipt_dscp.h,v 1.3 2002/08/05 19:00:21 laforge Exp
-*/
-#ifndef _IPT_DSCP_H
-#define _IPT_DSCP_H
-
-#include <linux/netfilter/xt_dscp.h>
-
-#define IPT_DSCP_MASK XT_DSCP_MASK
-#define IPT_DSCP_SHIFT XT_DSCP_SHIFT
-#define IPT_DSCP_MAX XT_DSCP_MAX
-
-#define ipt_dscp_info xt_dscp_info
-
-#endif /* _IPT_DSCP_H */
diff --git a/include/linux/netfilter_ipv4/ipt_ecn.h b/include/linux/netfilter_ipv4/ipt_ecn.h
index 1f0d9a4..9945baa 100644
--- a/include/linux/netfilter_ipv4/ipt_ecn.h
+++ b/include/linux/netfilter_ipv4/ipt_ecn.h
@@ -8,9 +8,9 @@
*/
#ifndef _IPT_ECN_H
#define _IPT_ECN_H
-#include <linux/netfilter_ipv4/ipt_dscp.h>
+#include <linux/netfilter/xt_dscp.h>
-#define IPT_ECN_IP_MASK (~IPT_DSCP_MASK)
+#define IPT_ECN_IP_MASK (~XT_DSCP_MASK)
#define IPT_ECN_OP_MATCH_IP 0x01
#define IPT_ECN_OP_MATCH_ECE 0x10
diff --git a/include/linux/netfilter_ipv4/ipt_esp.h b/include/linux/netfilter_ipv4/ipt_esp.h
deleted file mode 100644
index 78296e7..0000000
--- a/include/linux/netfilter_ipv4/ipt_esp.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _IPT_ESP_H
-#define _IPT_ESP_H
-
-#include <linux/netfilter/xt_esp.h>
-
-#define ipt_esp xt_esp
-#define IPT_ESP_INV_SPI XT_ESP_INV_SPI
-#define IPT_ESP_INV_MASK XT_ESP_INV_MASK
-
-#endif /*_IPT_ESP_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_hashlimit.h b/include/linux/netfilter_ipv4/ipt_hashlimit.h
deleted file mode 100644
index 5662120..0000000
--- a/include/linux/netfilter_ipv4/ipt_hashlimit.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _IPT_HASHLIMIT_H
-#define _IPT_HASHLIMIT_H
-
-#include <linux/netfilter/xt_hashlimit.h>
-
-#define IPT_HASHLIMIT_SCALE XT_HASHLIMIT_SCALE
-#define IPT_HASHLIMIT_HASH_DIP XT_HASHLIMIT_HASH_DIP
-#define IPT_HASHLIMIT_HASH_DPT XT_HASHLIMIT_HASH_DPT
-#define IPT_HASHLIMIT_HASH_SIP XT_HASHLIMIT_HASH_SIP
-#define IPT_HASHLIMIT_HASH_SPT XT_HASHLIMIT_HASH_SPT
-
-#define ipt_hashlimit_info xt_hashlimit_info
-
-#endif /* _IPT_HASHLIMIT_H */
diff --git a/include/linux/netfilter_ipv4/ipt_helper.h b/include/linux/netfilter_ipv4/ipt_helper.h
deleted file mode 100644
index 80452c2..0000000
--- a/include/linux/netfilter_ipv4/ipt_helper.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_HELPER_H
-#define _IPT_HELPER_H
-
-#include <linux/netfilter/xt_helper.h>
-#define ipt_helper_info xt_helper_info
-
-#endif /* _IPT_HELPER_H */
diff --git a/include/linux/netfilter_ipv4/ipt_iprange.h b/include/linux/netfilter_ipv4/ipt_iprange.h
deleted file mode 100644
index 5f1aebd..0000000
--- a/include/linux/netfilter_ipv4/ipt_iprange.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _IPT_IPRANGE_H
-#define _IPT_IPRANGE_H
-
-#include <linux/types.h>
-#include <linux/netfilter/xt_iprange.h>
-
-struct ipt_iprange {
- /* Inclusive: network order. */
- __be32 min_ip, max_ip;
-};
-
-struct ipt_iprange_info
-{
- struct ipt_iprange src;
- struct ipt_iprange dst;
-
- /* Flags from above */
- u_int8_t flags;
-};
-
-#endif /* _IPT_IPRANGE_H */
diff --git a/include/linux/netfilter_ipv4/ipt_length.h b/include/linux/netfilter_ipv4/ipt_length.h
deleted file mode 100644
index 9b45206..0000000
--- a/include/linux/netfilter_ipv4/ipt_length.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_LENGTH_H
-#define _IPT_LENGTH_H
-
-#include <linux/netfilter/xt_length.h>
-#define ipt_length_info xt_length_info
-
-#endif /*_IPT_LENGTH_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_limit.h b/include/linux/netfilter_ipv4/ipt_limit.h
deleted file mode 100644
index 92f5cd0..0000000
--- a/include/linux/netfilter_ipv4/ipt_limit.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _IPT_RATE_H
-#define _IPT_RATE_H
-
-#include <linux/netfilter/xt_limit.h>
-#define IPT_LIMIT_SCALE XT_LIMIT_SCALE
-#define ipt_rateinfo xt_rateinfo
-
-#endif /*_IPT_RATE_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_mac.h b/include/linux/netfilter_ipv4/ipt_mac.h
deleted file mode 100644
index b186008..0000000
--- a/include/linux/netfilter_ipv4/ipt_mac.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_MAC_H
-#define _IPT_MAC_H
-
-#include <linux/netfilter/xt_mac.h>
-#define ipt_mac_info xt_mac_info
-
-#endif /*_IPT_MAC_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_mark.h b/include/linux/netfilter_ipv4/ipt_mark.h
deleted file mode 100644
index bfde67c..0000000
--- a/include/linux/netfilter_ipv4/ipt_mark.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _IPT_MARK_H
-#define _IPT_MARK_H
-
-/* Backwards compatibility for old userspace */
-#include <linux/netfilter/xt_mark.h>
-
-#define ipt_mark_info xt_mark_info
-
-#endif /*_IPT_MARK_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_multiport.h b/include/linux/netfilter_ipv4/ipt_multiport.h
deleted file mode 100644
index 55fe85e..0000000
--- a/include/linux/netfilter_ipv4/ipt_multiport.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _IPT_MULTIPORT_H
-#define _IPT_MULTIPORT_H
-
-#include <linux/netfilter/xt_multiport.h>
-
-#define IPT_MULTIPORT_SOURCE XT_MULTIPORT_SOURCE
-#define IPT_MULTIPORT_DESTINATION XT_MULTIPORT_DESTINATION
-#define IPT_MULTIPORT_EITHER XT_MULTIPORT_EITHER
-
-#define IPT_MULTI_PORTS XT_MULTI_PORTS
-
-#define ipt_multiport xt_multiport
-#define ipt_multiport_v1 xt_multiport_v1
-
-#endif /*_IPT_MULTIPORT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_owner.h b/include/linux/netfilter_ipv4/ipt_owner.h
deleted file mode 100644
index a78445be..0000000
--- a/include/linux/netfilter_ipv4/ipt_owner.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _IPT_OWNER_H
-#define _IPT_OWNER_H
-
-/* match and invert flags */
-#define IPT_OWNER_UID 0x01
-#define IPT_OWNER_GID 0x02
-#define IPT_OWNER_PID 0x04
-#define IPT_OWNER_SID 0x08
-#define IPT_OWNER_COMM 0x10
-
-struct ipt_owner_info {
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_pid_t pid;
- __kernel_pid_t sid;
- char comm[16];
- u_int8_t match, invert; /* flags */
-};
-
-#endif /*_IPT_OWNER_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_physdev.h b/include/linux/netfilter_ipv4/ipt_physdev.h
deleted file mode 100644
index 2400e71..0000000
--- a/include/linux/netfilter_ipv4/ipt_physdev.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _IPT_PHYSDEV_H
-#define _IPT_PHYSDEV_H
-
-/* Backwards compatibility for old userspace */
-
-#include <linux/netfilter/xt_physdev.h>
-
-#define IPT_PHYSDEV_OP_IN XT_PHYSDEV_OP_IN
-#define IPT_PHYSDEV_OP_OUT XT_PHYSDEV_OP_OUT
-#define IPT_PHYSDEV_OP_BRIDGED XT_PHYSDEV_OP_BRIDGED
-#define IPT_PHYSDEV_OP_ISIN XT_PHYSDEV_OP_ISIN
-#define IPT_PHYSDEV_OP_ISOUT XT_PHYSDEV_OP_ISOUT
-#define IPT_PHYSDEV_OP_MASK XT_PHYSDEV_OP_MASK
-
-#define ipt_physdev_info xt_physdev_info
-
-#endif /*_IPT_PHYSDEV_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_pkttype.h b/include/linux/netfilter_ipv4/ipt_pkttype.h
deleted file mode 100644
index ff1fbc9..0000000
--- a/include/linux/netfilter_ipv4/ipt_pkttype.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_PKTTYPE_H
-#define _IPT_PKTTYPE_H
-
-#include <linux/netfilter/xt_pkttype.h>
-#define ipt_pkttype_info xt_pkttype_info
-
-#endif /*_IPT_PKTTYPE_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_policy.h b/include/linux/netfilter_ipv4/ipt_policy.h
deleted file mode 100644
index 1037fb2..0000000
--- a/include/linux/netfilter_ipv4/ipt_policy.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _IPT_POLICY_H
-#define _IPT_POLICY_H
-
-#include <linux/netfilter/xt_policy.h>
-
-#define IPT_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM
-
-/* ipt_policy_flags */
-#define IPT_POLICY_MATCH_IN XT_POLICY_MATCH_IN
-#define IPT_POLICY_MATCH_OUT XT_POLICY_MATCH_OUT
-#define IPT_POLICY_MATCH_NONE XT_POLICY_MATCH_NONE
-#define IPT_POLICY_MATCH_STRICT XT_POLICY_MATCH_STRICT
-
-/* ipt_policy_modes */
-#define IPT_POLICY_MODE_TRANSPORT XT_POLICY_MODE_TRANSPORT
-#define IPT_POLICY_MODE_TUNNEL XT_POLICY_MODE_TUNNEL
-
-#define ipt_policy_spec xt_policy_spec
-#define ipt_policy_addr xt_policy_addr
-#define ipt_policy_elem xt_policy_elem
-#define ipt_policy_info xt_policy_info
-
-#endif /* _IPT_POLICY_H */
diff --git a/include/linux/netfilter_ipv4/ipt_recent.h b/include/linux/netfilter_ipv4/ipt_recent.h
deleted file mode 100644
index d636cca..0000000
--- a/include/linux/netfilter_ipv4/ipt_recent.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _IPT_RECENT_H
-#define _IPT_RECENT_H
-
-#include <linux/netfilter/xt_recent.h>
-
-#define ipt_recent_info xt_recent_mtinfo
-
-enum {
- IPT_RECENT_CHECK = XT_RECENT_CHECK,
- IPT_RECENT_SET = XT_RECENT_SET,
- IPT_RECENT_UPDATE = XT_RECENT_UPDATE,
- IPT_RECENT_REMOVE = XT_RECENT_REMOVE,
- IPT_RECENT_TTL = XT_RECENT_TTL,
-
- IPT_RECENT_SOURCE = XT_RECENT_SOURCE,
- IPT_RECENT_DEST = XT_RECENT_DEST,
-
- IPT_RECENT_NAME_LEN = XT_RECENT_NAME_LEN,
-};
-
-#endif /*_IPT_RECENT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_sctp.h b/include/linux/netfilter_ipv4/ipt_sctp.h
deleted file mode 100644
index 80b3dba..0000000
--- a/include/linux/netfilter_ipv4/ipt_sctp.h
+++ /dev/null
@@ -1,105 +0,0 @@
-#ifndef _IPT_SCTP_H_
-#define _IPT_SCTP_H_
-
-#define IPT_SCTP_SRC_PORTS 0x01
-#define IPT_SCTP_DEST_PORTS 0x02
-#define IPT_SCTP_CHUNK_TYPES 0x04
-
-#define IPT_SCTP_VALID_FLAGS 0x07
-
-
-struct ipt_sctp_flag_info {
- u_int8_t chunktype;
- u_int8_t flag;
- u_int8_t flag_mask;
-};
-
-#define IPT_NUM_SCTP_FLAGS 4
-
-struct ipt_sctp_info {
- u_int16_t dpts[2]; /* Min, Max */
- u_int16_t spts[2]; /* Min, Max */
-
- u_int32_t chunkmap[256 / sizeof (u_int32_t)]; /* Bit mask of chunks to be matched according to RFC 2960 */
-
-#define SCTP_CHUNK_MATCH_ANY 0x01 /* Match if any of the chunk types are present */
-#define SCTP_CHUNK_MATCH_ALL 0x02 /* Match if all of the chunk types are present */
-#define SCTP_CHUNK_MATCH_ONLY 0x04 /* Match if these are the only chunk types present */
-
- u_int32_t chunk_match_type;
- struct ipt_sctp_flag_info flag_info[IPT_NUM_SCTP_FLAGS];
- int flag_count;
-
- u_int32_t flags;
- u_int32_t invflags;
-};
-
-#define bytes(type) (sizeof(type) * 8)
-
-#define SCTP_CHUNKMAP_SET(chunkmap, type) \
- do { \
- chunkmap[type / bytes(u_int32_t)] |= \
- 1 << (type % bytes(u_int32_t)); \
- } while (0)
-
-#define SCTP_CHUNKMAP_CLEAR(chunkmap, type) \
- do { \
- chunkmap[type / bytes(u_int32_t)] &= \
- ~(1 << (type % bytes(u_int32_t))); \
- } while (0)
-
-#define SCTP_CHUNKMAP_IS_SET(chunkmap, type) \
-({ \
- (chunkmap[type / bytes (u_int32_t)] & \
- (1 << (type % bytes (u_int32_t)))) ? 1: 0; \
-})
-
-#define SCTP_CHUNKMAP_RESET(chunkmap) \
- do { \
- int i; \
- for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \
- chunkmap[i] = 0; \
- } while (0)
-
-#define SCTP_CHUNKMAP_SET_ALL(chunkmap) \
- do { \
- int i; \
- for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \
- chunkmap[i] = ~0; \
- } while (0)
-
-#define SCTP_CHUNKMAP_COPY(destmap, srcmap) \
- do { \
- int i; \
- for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \
- destmap[i] = srcmap[i]; \
- } while (0)
-
-#define SCTP_CHUNKMAP_IS_CLEAR(chunkmap) \
-({ \
- int i; \
- int flag = 1; \
- for (i = 0; i < ARRAY_SIZE(chunkmap); i++) { \
- if (chunkmap[i]) { \
- flag = 0; \
- break; \
- } \
- } \
- flag; \
-})
-
-#define SCTP_CHUNKMAP_IS_ALL_SET(chunkmap) \
-({ \
- int i; \
- int flag = 1; \
- for (i = 0; i < ARRAY_SIZE(chunkmap); i++) { \
- if (chunkmap[i] != ~0) { \
- flag = 0; \
- break; \
- } \
- } \
- flag; \
-})
-
-#endif /* _IPT_SCTP_H_ */
-
diff --git a/include/linux/netfilter_ipv4/ipt_state.h b/include/linux/netfilter_ipv4/ipt_state.h
deleted file mode 100644
index a44a99c..0000000
--- a/include/linux/netfilter_ipv4/ipt_state.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _IPT_STATE_H
-#define _IPT_STATE_H
-
-/* Backwards compatibility for old userspace */
-
-#include <linux/netfilter/xt_state.h>
-
-#define IPT_STATE_BIT XT_STATE_BIT
-#define IPT_STATE_INVALID XT_STATE_INVALID
-
-#define IPT_STATE_UNTRACKED XT_STATE_UNTRACKED
-
-#define ipt_state_info xt_state_info
-
-#endif /*_IPT_STATE_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_string.h b/include/linux/netfilter_ipv4/ipt_string.h
deleted file mode 100644
index c26de30..0000000
--- a/include/linux/netfilter_ipv4/ipt_string.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _IPT_STRING_H
-#define _IPT_STRING_H
-
-#include <linux/netfilter/xt_string.h>
-
-#define IPT_STRING_MAX_PATTERN_SIZE XT_STRING_MAX_PATTERN_SIZE
-#define IPT_STRING_MAX_ALGO_NAME_SIZE XT_STRING_MAX_ALGO_NAME_SIZE
-#define ipt_string_info xt_string_info
-
-#endif /*_IPT_STRING_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_tcpmss.h b/include/linux/netfilter_ipv4/ipt_tcpmss.h
deleted file mode 100644
index 18bbc8e..0000000
--- a/include/linux/netfilter_ipv4/ipt_tcpmss.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IPT_TCPMSS_MATCH_H
-#define _IPT_TCPMSS_MATCH_H
-
-#include <linux/netfilter/xt_tcpmss.h>
-#define ipt_tcpmss_match_info xt_tcpmss_match_info
-
-#endif /*_IPT_TCPMSS_MATCH_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_tos.h b/include/linux/netfilter_ipv4/ipt_tos.h
deleted file mode 100644
index a21f5df..0000000
--- a/include/linux/netfilter_ipv4/ipt_tos.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _IPT_TOS_H
-#define _IPT_TOS_H
-
-struct ipt_tos_info {
- u_int8_t tos;
- u_int8_t invert;
-};
-
-#ifndef IPTOS_NORMALSVC
-#define IPTOS_NORMALSVC 0
-#endif
-
-#endif /*_IPT_TOS_H*/
diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild
index aca4bd1..e864eae 100644
--- a/include/linux/netfilter_ipv6/Kbuild
+++ b/include/linux/netfilter_ipv6/Kbuild
@@ -1,22 +1,12 @@
header-y += ip6t_HL.h
header-y += ip6t_LOG.h
-header-y += ip6t_MARK.h
header-y += ip6t_REJECT.h
header-y += ip6t_ah.h
-header-y += ip6t_esp.h
header-y += ip6t_frag.h
-header-y += ip6t_hl.h
header-y += ip6t_ipv6header.h
-header-y += ip6t_length.h
-header-y += ip6t_limit.h
-header-y += ip6t_mac.h
-header-y += ip6t_mark.h
+header-y += ip6t_hl.h
header-y += ip6t_mh.h
-header-y += ip6t_multiport.h
header-y += ip6t_opts.h
-header-y += ip6t_owner.h
-header-y += ip6t_physdev.h
-header-y += ip6t_policy.h
header-y += ip6t_rt.h
unifdef-y += ip6_tables.h
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index 1089e33..a64e145 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -306,7 +306,7 @@
extern void ip6t_init(void) __init;
extern struct xt_table *ip6t_register_table(struct net *net,
- struct xt_table *table,
+ const struct xt_table *table,
const struct ip6t_replace *repl);
extern void ip6t_unregister_table(struct xt_table *table);
extern unsigned int ip6t_do_table(struct sk_buff *skb,
diff --git a/include/linux/netfilter_ipv6/ip6t_MARK.h b/include/linux/netfilter_ipv6/ip6t_MARK.h
deleted file mode 100644
index 7cf629a..0000000
--- a/include/linux/netfilter_ipv6/ip6t_MARK.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _IP6T_MARK_H_target
-#define _IP6T_MARK_H_target
-
-/* Backwards compatibility for old userspace */
-#include <linux/netfilter/xt_MARK.h>
-
-#define ip6t_mark_target_info xt_mark_target_info
-
-#endif /*_IP6T_MARK_H_target*/
diff --git a/include/linux/netfilter_ipv6/ip6t_esp.h b/include/linux/netfilter_ipv6/ip6t_esp.h
deleted file mode 100644
index f62eaf5..0000000
--- a/include/linux/netfilter_ipv6/ip6t_esp.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _IP6T_ESP_H
-#define _IP6T_ESP_H
-
-#include <linux/netfilter/xt_esp.h>
-
-#define ip6t_esp xt_esp
-#define IP6T_ESP_INV_SPI XT_ESP_INV_SPI
-#define IP6T_ESP_INV_MASK XT_ESP_INV_MASK
-
-#endif /*_IP6T_ESP_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_length.h b/include/linux/netfilter_ipv6/ip6t_length.h
deleted file mode 100644
index 9e9689d..0000000
--- a/include/linux/netfilter_ipv6/ip6t_length.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _IP6T_LENGTH_H
-#define _IP6T_LENGTH_H
-
-#include <linux/netfilter/xt_length.h>
-#define ip6t_length_info xt_length_info
-
-#endif /*_IP6T_LENGTH_H*/
-
diff --git a/include/linux/netfilter_ipv6/ip6t_limit.h b/include/linux/netfilter_ipv6/ip6t_limit.h
deleted file mode 100644
index 487e5ea..0000000
--- a/include/linux/netfilter_ipv6/ip6t_limit.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _IP6T_RATE_H
-#define _IP6T_RATE_H
-
-#include <linux/netfilter/xt_limit.h>
-#define IP6T_LIMIT_SCALE XT_LIMIT_SCALE
-#define ip6t_rateinfo xt_rateinfo
-
-#endif /*_IP6T_RATE_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_mac.h b/include/linux/netfilter_ipv6/ip6t_mac.h
deleted file mode 100644
index ac58e83..0000000
--- a/include/linux/netfilter_ipv6/ip6t_mac.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _IP6T_MAC_H
-#define _IP6T_MAC_H
-
-#include <linux/netfilter/xt_mac.h>
-#define ip6t_mac_info xt_mac_info
-
-#endif /*_IP6T_MAC_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_mark.h b/include/linux/netfilter_ipv6/ip6t_mark.h
deleted file mode 100644
index ff20495..0000000
--- a/include/linux/netfilter_ipv6/ip6t_mark.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _IP6T_MARK_H
-#define _IP6T_MARK_H
-
-/* Backwards compatibility for old userspace */
-#include <linux/netfilter/xt_mark.h>
-
-#define ip6t_mark_info xt_mark_info
-
-#endif /*_IPT_MARK_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_multiport.h b/include/linux/netfilter_ipv6/ip6t_multiport.h
deleted file mode 100644
index 042c926..0000000
--- a/include/linux/netfilter_ipv6/ip6t_multiport.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _IP6T_MULTIPORT_H
-#define _IP6T_MULTIPORT_H
-
-#include <linux/netfilter/xt_multiport.h>
-
-#define IP6T_MULTIPORT_SOURCE XT_MULTIPORT_SOURCE
-#define IP6T_MULTIPORT_DESTINATION XT_MULTIPORT_DESTINATION
-#define IP6T_MULTIPORT_EITHER XT_MULTIPORT_EITHER
-
-#define IP6T_MULTI_PORTS XT_MULTI_PORTS
-
-#define ip6t_multiport xt_multiport
-
-#endif /*_IP6T_MULTIPORT_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_owner.h b/include/linux/netfilter_ipv6/ip6t_owner.h
deleted file mode 100644
index ec5cc7a..0000000
--- a/include/linux/netfilter_ipv6/ip6t_owner.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _IP6T_OWNER_H
-#define _IP6T_OWNER_H
-
-/* match and invert flags */
-#define IP6T_OWNER_UID 0x01
-#define IP6T_OWNER_GID 0x02
-#define IP6T_OWNER_PID 0x04
-#define IP6T_OWNER_SID 0x08
-
-struct ip6t_owner_info {
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_pid_t pid;
- __kernel_pid_t sid;
- u_int8_t match, invert; /* flags */
-};
-
-#endif /*_IPT_OWNER_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_physdev.h b/include/linux/netfilter_ipv6/ip6t_physdev.h
deleted file mode 100644
index c161c0a..0000000
--- a/include/linux/netfilter_ipv6/ip6t_physdev.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _IP6T_PHYSDEV_H
-#define _IP6T_PHYSDEV_H
-
-/* Backwards compatibility for old userspace */
-
-#include <linux/netfilter/xt_physdev.h>
-
-#define IP6T_PHYSDEV_OP_IN XT_PHYSDEV_OP_IN
-#define IP6T_PHYSDEV_OP_OUT XT_PHYSDEV_OP_OUT
-#define IP6T_PHYSDEV_OP_BRIDGED XT_PHYSDEV_OP_BRIDGED
-#define IP6T_PHYSDEV_OP_ISIN XT_PHYSDEV_OP_ISIN
-#define IP6T_PHYSDEV_OP_ISOUT XT_PHYSDEV_OP_ISOUT
-#define IP6T_PHYSDEV_OP_MASK XT_PHYSDEV_OP_MASK
-
-#define ip6t_physdev_info xt_physdev_info
-
-#endif /*_IP6T_PHYSDEV_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_policy.h b/include/linux/netfilter_ipv6/ip6t_policy.h
deleted file mode 100644
index b1c449d..0000000
--- a/include/linux/netfilter_ipv6/ip6t_policy.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _IP6T_POLICY_H
-#define _IP6T_POLICY_H
-
-#include <linux/netfilter/xt_policy.h>
-
-#define IP6T_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM
-
-/* ip6t_policy_flags */
-#define IP6T_POLICY_MATCH_IN XT_POLICY_MATCH_IN
-#define IP6T_POLICY_MATCH_OUT XT_POLICY_MATCH_OUT
-#define IP6T_POLICY_MATCH_NONE XT_POLICY_MATCH_NONE
-#define IP6T_POLICY_MATCH_STRICT XT_POLICY_MATCH_STRICT
-
-/* ip6t_policy_modes */
-#define IP6T_POLICY_MODE_TRANSPORT XT_POLICY_MODE_TRANSPORT
-#define IP6T_POLICY_MODE_TUNNEL XT_POLICY_MODE_TUNNEL
-
-#define ip6t_policy_spec xt_policy_spec
-#define ip6t_policy_addr xt_policy_addr
-#define ip6t_policy_elem xt_policy_elem
-#define ip6t_policy_info xt_policy_info
-
-#endif /* _IP6T_POLICY_H */
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 5ba398e..0fbecbb 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -217,12 +217,13 @@
struct netlink_callback
{
- struct sk_buff *skb;
- struct nlmsghdr *nlh;
- int (*dump)(struct sk_buff * skb, struct netlink_callback *cb);
- int (*done)(struct netlink_callback *cb);
- int family;
- long args[6];
+ struct sk_buff *skb;
+ const struct nlmsghdr *nlh;
+ int (*dump)(struct sk_buff * skb,
+ struct netlink_callback *cb);
+ int (*done)(struct netlink_callback *cb);
+ int family;
+ long args[6];
};
struct netlink_notify
@@ -258,7 +259,7 @@
NLMSG_NEW(skb, pid, seq, type, len, 0)
extern int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
- struct nlmsghdr *nlh,
+ const struct nlmsghdr *nlh,
int (*dump)(struct sk_buff *skb, struct netlink_callback*),
int (*done)(struct netlink_callback*));
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index bd2eba5..33b2836 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -472,6 +472,7 @@
#define NFSPROC4_NULL 0
#define NFSPROC4_COMPOUND 1
+#define NFS4_VERSION 4
#define NFS4_MINOR_VERSION 0
#if defined(CONFIG_NFS_V4_1)
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index 19fe15d..320569e 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -167,6 +167,15 @@
#define NFS_CAP_SYMLINKS (1U << 2)
#define NFS_CAP_ACLS (1U << 3)
#define NFS_CAP_ATOMIC_OPEN (1U << 4)
+#define NFS_CAP_CHANGE_ATTR (1U << 5)
+#define NFS_CAP_FILEID (1U << 6)
+#define NFS_CAP_MODE (1U << 7)
+#define NFS_CAP_NLINK (1U << 8)
+#define NFS_CAP_OWNER (1U << 9)
+#define NFS_CAP_OWNER_GROUP (1U << 10)
+#define NFS_CAP_ATIME (1U << 11)
+#define NFS_CAP_CTIME (1U << 12)
+#define NFS_CAP_MTIME (1U << 13)
/* maximum number of slots to use */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index dbea93b..a8d71ed 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -242,6 +242,29 @@
* @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
* determined by the network interface.
*
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ * to identify the device, and the TESTDATA blob attribute to pass through
+ * to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ * requests to connect to a specified network but without separating
+ * auth and assoc steps. For this, you need to specify the SSID in a
+ * %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ * It is also sent as an event, with the BSSID and response IEs when the
+ * connection is established or failed to be established. This can be
+ * determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ * sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ * %NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ * associated with this wiphy must be down and will follow.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -310,6 +333,14 @@
NL80211_CMD_JOIN_IBSS,
NL80211_CMD_LEAVE_IBSS,
+ NL80211_CMD_TESTMODE,
+
+ NL80211_CMD_CONNECT,
+ NL80211_CMD_ROAM,
+ NL80211_CMD_DISCONNECT,
+
+ NL80211_CMD_SET_WIPHY_NETNS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -449,10 +480,6 @@
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
* scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
- * scan result list changes (BSS expired or added) so that applications
- * can verify that they got a single, consistent snapshot (when all dump
- * messages carried the same generation number)
* @NL80211_ATTR_BSS: scan result BSS
*
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
@@ -511,6 +538,52 @@
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
*
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ * event was due to the AP disconnecting the station, and not due to
+ * a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ * event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ * that protected APs should be used.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
+ * indicate which unicast key ciphers will be used with the connection
+ * (an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
+ * which group key cipher will be used with the connection (a u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
+ * which WPA version(s) the AP we want to associate with is using
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
+ * which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ * sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ * sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ * commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ * %NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ * and join_ibss(), key information is in a nested attribute each
+ * with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ * dumps. This number increases whenever the object list being
+ * dumped changes, and as such userspace can verify that it has
+ * obtained a complete and consistent snapshot by verifying that
+ * all dump messages contain the same generation number. If it
+ * changed then the list changed and the dump should be repeated
+ * completely from scratch.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -582,7 +655,7 @@
NL80211_ATTR_SCAN_FREQUENCIES,
NL80211_ATTR_SCAN_SSIDS,
- NL80211_ATTR_SCAN_GENERATION,
+ NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
NL80211_ATTR_BSS,
NL80211_ATTR_REG_INITIATOR,
@@ -619,16 +692,42 @@
NL80211_ATTR_CONTROL_PORT,
+ NL80211_ATTR_TESTDATA,
+
+ NL80211_ATTR_PRIVACY,
+
+ NL80211_ATTR_DISCONNECTED_BY_AP,
+ NL80211_ATTR_STATUS_CODE,
+
+ NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ NL80211_ATTR_CIPHER_SUITE_GROUP,
+ NL80211_ATTR_WPA_VERSIONS,
+ NL80211_ATTR_AKM_SUITES,
+
+ NL80211_ATTR_REQ_IE,
+ NL80211_ATTR_RESP_IE,
+
+ NL80211_ATTR_PREV_BSSID,
+
+ NL80211_ATTR_KEY,
+ NL80211_ATTR_KEYS,
+
+ NL80211_ATTR_PID,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
};
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+
/*
* Allow user space programs to use #ifdef on new attributes by defining them
* here
*/
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
@@ -642,6 +741,12 @@
#define NL80211_ATTR_SSID NL80211_ATTR_SSID
#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
@@ -650,6 +755,9 @@
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
+#define NL80211_MAX_NR_CIPHER_SUITES 5
+#define NL80211_MAX_NR_AKM_SUITES 2
+
/**
* enum nl80211_iftype - (virtual) interface types
*
@@ -1168,6 +1276,7 @@
* in mBm (100 * dBm) (s32)
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
* in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -1181,6 +1290,7 @@
NL80211_BSS_INFORMATION_ELEMENTS,
NL80211_BSS_SIGNAL_MBM,
NL80211_BSS_SIGNAL_UNSPEC,
+ NL80211_BSS_STATUS,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -1188,18 +1298,37 @@
};
/**
+ * enum nl80211_bss_status - BSS "status"
+ */
+enum nl80211_bss_status {
+ NL80211_BSS_STATUS_AUTHENTICATED,
+ NL80211_BSS_STATUS_ASSOCIATED,
+ NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
* enum nl80211_auth_type - AuthenticationType
*
* @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
* @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ * trying multiple times); this is invalid in netlink -- leave out
+ * the attribute for this on CONNECT commands.
*/
enum nl80211_auth_type {
NL80211_AUTHTYPE_OPEN_SYSTEM,
NL80211_AUTHTYPE_SHARED_KEY,
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
+
+ /* keep last */
+ __NL80211_AUTHTYPE_NUM,
+ NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+ NL80211_AUTHTYPE_AUTOMATIC
};
/**
@@ -1224,4 +1353,39 @@
NL80211_MFP_REQUIRED,
};
+enum nl80211_wpa_versions {
+ NL80211_WPA_VERSION_1 = 1 << 0,
+ NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+ __NL80211_KEY_INVALID,
+ NL80211_KEY_DATA,
+ NL80211_KEY_IDX,
+ NL80211_KEY_CIPHER,
+ NL80211_KEY_SEQ,
+ NL80211_KEY_DEFAULT,
+ NL80211_KEY_DEFAULT_MGMT,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
+ NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 2cda00c..b7d9435 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -64,12 +64,14 @@
IEEE802154_ATTR_COORD_REALIGN,
IEEE802154_ATTR_SEC,
+ IEEE802154_ATTR_PAGE,
+
__IEEE802154_ATTR_MAX,
};
#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1)
-extern struct nla_policy ieee802154_policy[];
+extern const struct nla_policy ieee802154_policy[];
/* commands */
/* REQ should be responded with CONF
@@ -111,6 +113,8 @@
IEEE802154_RX_ENABLE_REQ, /* Not supported yet */
IEEE802154_RX_ENABLE_CONF, /* Not supported yet */
+ IEEE802154_LIST_IFACE,
+
__IEEE802154_CMD_MAX,
};
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 29af2d5..b752e80 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -28,8 +28,23 @@
static inline void acpi_nmi_enable(void) { }
#endif
-#ifndef trigger_all_cpu_backtrace
-#define trigger_all_cpu_backtrace() do { } while (0)
+/*
+ * Create trigger_all_cpu_backtrace() out of the arch-provided
+ * base function. Return whether such support was available,
+ * to allow calling code to fall back to some other mechanism:
+ */
+#ifdef arch_trigger_all_cpu_backtrace
+static inline bool trigger_all_cpu_backtrace(void)
+{
+ arch_trigger_all_cpu_backtrace();
+
+ return true;
+}
+#else
+static inline bool trigger_all_cpu_backtrace(void)
+{
+ return false;
+}
#endif
#endif
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
index 1d9518b..5171639 100644
--- a/include/linux/oprofile.h
+++ b/include/linux/oprofile.h
@@ -67,6 +67,9 @@
/* Initiate a stack backtrace. Optional. */
void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
+
+ /* Multiplex between different events. Optional. */
+ int (*switch_events)(void);
/* CPU identification string. */
char * cpu_type;
};
@@ -171,7 +174,6 @@
struct op_entry {
struct ring_buffer_event *event;
struct op_sample *sample;
- unsigned long irq_flags;
unsigned long size;
unsigned long *data;
};
@@ -180,6 +182,7 @@
struct pt_regs * const regs,
unsigned long pc, int code, int size);
int oprofile_add_data(struct op_entry *entry, unsigned long val);
+int oprofile_add_data64(struct op_entry *entry, u64 val);
int oprofile_write_commit(struct op_entry *entry);
#endif /* OPROFILE_H */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index aec3252..ed5d750 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -132,7 +132,7 @@
{
VM_BUG_ON(in_interrupt());
-#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
# ifdef CONFIG_PREEMPT
VM_BUG_ON(!in_atomic());
# endif
@@ -170,7 +170,7 @@
{
VM_BUG_ON(in_interrupt());
-#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
# ifdef CONFIG_PREEMPT
VM_BUG_ON(!in_atomic());
# endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 73b46b6..555a8262 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -376,6 +376,9 @@
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
+/* AMD SB Chipset */
+#define PCI_DEVICE_ID_AMD_SB900_IDE 0x780c
+#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
@@ -537,6 +540,7 @@
#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450
#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451
#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458
+#define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F
#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090
#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091
#define PCI_DEVICE_ID_AMD_CS5536_AUDIO 0x2093
@@ -1984,6 +1988,8 @@
#define PCI_VENDOR_ID_SAMSUNG 0x144d
+#define PCI_VENDOR_ID_GIGABYTE 0x1458
+
#define PCI_VENDOR_ID_AMBIT 0x1468
#define PCI_VENDOR_ID_MYRICOM 0x14c1
@@ -2062,7 +2068,6 @@
#define PCI_DEVICE_ID_TIGON3_5787M 0x1693
#define PCI_DEVICE_ID_TIGON3_5782 0x1696
#define PCI_DEVICE_ID_TIGON3_5784 0x1698
-#define PCI_DEVICE_ID_TIGON3_5785 0x1699
#define PCI_DEVICE_ID_TIGON3_5786 0x169a
#define PCI_DEVICE_ID_TIGON3_5787 0x169b
#define PCI_DEVICE_ID_TIGON3_5788 0x169c
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 68438e1..0761491 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -66,14 +66,24 @@
DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
____cacheline_aligned_in_smp
+#define DECLARE_PER_CPU_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \
+ ____cacheline_aligned
+
+#define DEFINE_PER_CPU_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \
+ ____cacheline_aligned
+
/*
* Declaration/definition used for per-CPU variables that must be page aligned.
*/
-#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \
- DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") \
+ __aligned(PAGE_SIZE)
#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
+ DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") \
+ __aligned(PAGE_SIZE)
/*
* Intermodule exports for per-CPU variables.
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index b53f700..972f90d 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -216,6 +216,7 @@
#define PERF_COUNTER_IOC_REFRESH _IO ('$', 2)
#define PERF_COUNTER_IOC_RESET _IO ('$', 3)
#define PERF_COUNTER_IOC_PERIOD _IOW('$', 4, u64)
+#define PERF_COUNTER_IOC_SET_OUTPUT _IO ('$', 5)
enum perf_counter_ioc_flags {
PERF_IOC_FLAG_GROUP = 1U << 0,
@@ -415,6 +416,9 @@
PERF_CONTEXT_MAX = (__u64)-4095,
};
+#define PERF_FLAG_FD_NO_GROUP (1U << 0)
+#define PERF_FLAG_FD_OUTPUT (1U << 1)
+
#ifdef __KERNEL__
/*
* Kernel-internal data types and definitions:
@@ -536,6 +540,7 @@
struct list_head sibling_list;
int nr_siblings;
struct perf_counter *group_leader;
+ struct perf_counter *output;
const struct pmu *pmu;
enum perf_counter_active_state state;
@@ -761,6 +766,8 @@
extern int sysctl_perf_counter_sample_rate;
extern void perf_counter_init(void);
+extern void perf_tpcounter_event(int event_id, u64 addr, u64 count,
+ void *record, int entry_size);
#ifndef perf_misc_flags
#define perf_misc_flags(regs) (user_mode(regs) ? PERF_EVENT_MISC_USER : \
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index ee5e3c9..1ef5a07 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -99,6 +99,9 @@
__u8 spn_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - 3];
} __attribute__ ((packed));
+/* Well known address */
+#define PN_DEV_PC 0x10
+
static inline __u16 pn_object(__u8 addr, __u16 port)
{
return (addr << 8) | (port & 0x3ff);
@@ -170,4 +173,21 @@
return spn->spn_resource;
}
+/* Phonet device ioctl requests */
+#ifdef __KERNEL__
+#define SIOCPNGAUTOCONF (SIOCDEVPRIVATE + 0)
+
+struct if_phonet_autoconf {
+ uint8_t device;
+};
+
+struct if_phonet_req {
+ char ifr_phonet_name[16];
+ union {
+ struct if_phonet_autoconf ifru_phonet_autoconf;
+ } ifr_ifru;
+};
+#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
+#endif /* __KERNEL__ */
+
#endif
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
deleted file mode 100644
index bfd92e1..0000000
--- a/include/linux/rcuclassic.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion (classic version)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2001
- *
- * Author: Dipankar Sarma <dipankar@in.ibm.com>
- *
- * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU
- *
- */
-
-#ifndef __LINUX_RCUCLASSIC_H
-#define __LINUX_RCUCLASSIC_H
-
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
-
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rcp->jiffies_stall */
-#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rcp->jiffies_stall */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-/* Global control variables for rcupdate callback mechanism. */
-struct rcu_ctrlblk {
- long cur; /* Current batch number. */
- long completed; /* Number of the last completed batch */
- long pending; /* Number of the last pending batch */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
- unsigned long gp_start; /* Time at which GP started in jiffies. */
- unsigned long jiffies_stall;
- /* Time at which to check for CPU stalls. */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
- int signaled;
-
- spinlock_t lock ____cacheline_internodealigned_in_smp;
- DECLARE_BITMAP(cpumask, NR_CPUS); /* CPUs that need to switch for */
- /* current batch to proceed. */
-} ____cacheline_internodealigned_in_smp;
-
-/* Is batch a before batch b ? */
-static inline int rcu_batch_before(long a, long b)
-{
- return (a - b) < 0;
-}
-
-/* Is batch a after batch b ? */
-static inline int rcu_batch_after(long a, long b)
-{
- return (a - b) > 0;
-}
-
-/* Per-CPU data for Read-Copy UPdate. */
-struct rcu_data {
- /* 1) quiescent state handling : */
- long quiescbatch; /* Batch # for grace period */
- int passed_quiesc; /* User-mode/idle loop etc. */
- int qs_pending; /* core waits for quiesc state */
-
- /* 2) batch handling */
- /*
- * if nxtlist is not NULL, then:
- * batch:
- * The batch # for the last entry of nxtlist
- * [*nxttail[1], NULL = *nxttail[2]):
- * Entries that batch # <= batch
- * [*nxttail[0], *nxttail[1]):
- * Entries that batch # <= batch - 1
- * [nxtlist, *nxttail[0]):
- * Entries that batch # <= batch - 2
- * The grace period for these entries has completed, and
- * the other grace-period-completed entries may be moved
- * here temporarily in rcu_process_callbacks().
- */
- long batch;
- struct rcu_head *nxtlist;
- struct rcu_head **nxttail[3];
- long qlen; /* # of queued callbacks */
- struct rcu_head *donelist;
- struct rcu_head **donetail;
- long blimit; /* Upper limit on a processed batch */
- int cpu;
- struct rcu_head barrier;
-};
-
-/*
- * Increment the quiescent state counter.
- * The counter is a bit degenerated: We do not need to know
- * how many quiescent states passed, just if there was at least
- * one since the start of the grace period. Thus just a flag.
- */
-extern void rcu_qsctr_inc(int cpu);
-extern void rcu_bh_qsctr_inc(int cpu);
-
-extern int rcu_pending(int cpu);
-extern int rcu_needs_cpu(int cpu);
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern struct lockdep_map rcu_lock_map;
-# define rcu_read_acquire() \
- lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
-# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_)
-#else
-# define rcu_read_acquire() do { } while (0)
-# define rcu_read_release() do { } while (0)
-#endif
-
-#define __rcu_read_lock() \
- do { \
- preempt_disable(); \
- __acquire(RCU); \
- rcu_read_acquire(); \
- } while (0)
-#define __rcu_read_unlock() \
- do { \
- rcu_read_release(); \
- __release(RCU); \
- preempt_enable(); \
- } while (0)
-#define __rcu_read_lock_bh() \
- do { \
- local_bh_disable(); \
- __acquire(RCU_BH); \
- rcu_read_acquire(); \
- } while (0)
-#define __rcu_read_unlock_bh() \
- do { \
- rcu_read_release(); \
- __release(RCU_BH); \
- local_bh_enable(); \
- } while (0)
-
-#define __synchronize_sched() synchronize_rcu()
-
-#define call_rcu_sched(head, func) call_rcu(head, func)
-
-extern void __rcu_init(void);
-#define rcu_init_sched() do { } while (0)
-extern void rcu_check_callbacks(int cpu, int user);
-extern void rcu_restart_cpu(int cpu);
-
-extern long rcu_batches_completed(void);
-extern long rcu_batches_completed_bh(void);
-
-#define rcu_enter_nohz() do { } while (0)
-#define rcu_exit_nohz() do { } while (0)
-
-/* A context switch is a grace period for rcuclassic. */
-static inline int rcu_blocking_is_gp(void)
-{
- return num_online_cpus() == 1;
-}
-
-#endif /* __LINUX_RCUCLASSIC_H */
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 15fbb3c..95e0615 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -51,18 +51,26 @@
void (*func)(struct rcu_head *head);
};
-/* Internal to kernel, but needed by rcupreempt.h. */
+/* Exported common interfaces */
+extern void synchronize_rcu(void);
+extern void synchronize_rcu_bh(void);
+extern void rcu_barrier(void);
+extern void rcu_barrier_bh(void);
+extern void rcu_barrier_sched(void);
+extern void synchronize_sched_expedited(void);
+extern int sched_expedited_torture_stats(char *page);
+
+/* Internal to kernel */
+extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
+extern int rcu_needs_cpu(int cpu);
extern int rcu_scheduler_active;
-#if defined(CONFIG_CLASSIC_RCU)
-#include <linux/rcuclassic.h>
-#elif defined(CONFIG_TREE_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
#include <linux/rcutree.h>
-#elif defined(CONFIG_PREEMPT_RCU)
-#include <linux/rcupreempt.h>
#else
#error "Unknown RCU implementation specified to kernel configuration"
-#endif /* #else #if defined(CONFIG_CLASSIC_RCU) */
+#endif
#define RCU_HEAD_INIT { .next = NULL, .func = NULL }
#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT
@@ -70,6 +78,16 @@
(ptr)->next = NULL; (ptr)->func = NULL; \
} while (0)
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern struct lockdep_map rcu_lock_map;
+# define rcu_read_acquire() \
+ lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
+# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_)
+#else
+# define rcu_read_acquire() do { } while (0)
+# define rcu_read_release() do { } while (0)
+#endif
+
/**
* rcu_read_lock - mark the beginning of an RCU read-side critical section.
*
@@ -99,7 +117,12 @@
*
* It is illegal to block while in an RCU read-side critical section.
*/
-#define rcu_read_lock() __rcu_read_lock()
+static inline void rcu_read_lock(void)
+{
+ __rcu_read_lock();
+ __acquire(RCU);
+ rcu_read_acquire();
+}
/**
* rcu_read_unlock - marks the end of an RCU read-side critical section.
@@ -116,7 +139,12 @@
* used as well. RCU does not care how the writers keep out of each
* others' way, as long as they do so.
*/
-#define rcu_read_unlock() __rcu_read_unlock()
+static inline void rcu_read_unlock(void)
+{
+ rcu_read_release();
+ __release(RCU);
+ __rcu_read_unlock();
+}
/**
* rcu_read_lock_bh - mark the beginning of a softirq-only RCU critical section
@@ -129,14 +157,24 @@
* can use just rcu_read_lock().
*
*/
-#define rcu_read_lock_bh() __rcu_read_lock_bh()
+static inline void rcu_read_lock_bh(void)
+{
+ __rcu_read_lock_bh();
+ __acquire(RCU_BH);
+ rcu_read_acquire();
+}
/*
* rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
*
* See rcu_read_lock_bh() for more information.
*/
-#define rcu_read_unlock_bh() __rcu_read_unlock_bh()
+static inline void rcu_read_unlock_bh(void)
+{
+ rcu_read_release();
+ __release(RCU_BH);
+ __rcu_read_unlock_bh();
+}
/**
* rcu_read_lock_sched - mark the beginning of a RCU-classic critical section
@@ -147,17 +185,34 @@
* - call_rcu_sched() and rcu_barrier_sched()
* on the write-side to insure proper synchronization.
*/
-#define rcu_read_lock_sched() preempt_disable()
-#define rcu_read_lock_sched_notrace() preempt_disable_notrace()
+static inline void rcu_read_lock_sched(void)
+{
+ preempt_disable();
+ __acquire(RCU_SCHED);
+ rcu_read_acquire();
+}
+static inline notrace void rcu_read_lock_sched_notrace(void)
+{
+ preempt_disable_notrace();
+ __acquire(RCU_SCHED);
+}
/*
* rcu_read_unlock_sched - marks the end of a RCU-classic critical section
*
* See rcu_read_lock_sched for more information.
*/
-#define rcu_read_unlock_sched() preempt_enable()
-#define rcu_read_unlock_sched_notrace() preempt_enable_notrace()
-
+static inline void rcu_read_unlock_sched(void)
+{
+ rcu_read_release();
+ __release(RCU_SCHED);
+ preempt_enable();
+}
+static inline notrace void rcu_read_unlock_sched_notrace(void)
+{
+ __release(RCU_SCHED);
+ preempt_enable_notrace();
+}
/**
@@ -259,15 +314,4 @@
extern void call_rcu_bh(struct rcu_head *head,
void (*func)(struct rcu_head *head));
-/* Exported common interfaces */
-extern void synchronize_rcu(void);
-extern void rcu_barrier(void);
-extern void rcu_barrier_bh(void);
-extern void rcu_barrier_sched(void);
-
-/* Internal to kernel */
-extern void rcu_init(void);
-extern void rcu_scheduler_starting(void);
-extern int rcu_needs_cpu(int cpu);
-
#endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
deleted file mode 100644
index fce5227..0000000
--- a/include/linux/rcupreempt.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion (RT implementation)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Paul McKenney <paulmck@us.ibm.com>
- *
- * Based on the original work by Paul McKenney <paul.mckenney@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU
- *
- */
-
-#ifndef __LINUX_RCUPREEMPT_H
-#define __LINUX_RCUPREEMPT_H
-
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
-
-extern void rcu_qsctr_inc(int cpu);
-static inline void rcu_bh_qsctr_inc(int cpu) { }
-
-/*
- * Someone might want to pass call_rcu_bh as a function pointer.
- * So this needs to just be a rename and not a macro function.
- * (no parentheses)
- */
-#define call_rcu_bh call_rcu
-
-/**
- * call_rcu_sched - Queue RCU callback for invocation after sched grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual update function to be invoked after the grace period
- *
- * The update function will be invoked some time after a full
- * synchronize_sched()-style grace period elapses, in other words after
- * all currently executing preempt-disabled sections of code (including
- * hardirq handlers, NMI handlers, and local_irq_save() blocks) have
- * completed.
- */
-extern void call_rcu_sched(struct rcu_head *head,
- void (*func)(struct rcu_head *head));
-
-extern void __rcu_read_lock(void) __acquires(RCU);
-extern void __rcu_read_unlock(void) __releases(RCU);
-extern int rcu_pending(int cpu);
-extern int rcu_needs_cpu(int cpu);
-
-#define __rcu_read_lock_bh() { rcu_read_lock(); local_bh_disable(); }
-#define __rcu_read_unlock_bh() { local_bh_enable(); rcu_read_unlock(); }
-
-extern void __synchronize_sched(void);
-
-extern void __rcu_init(void);
-extern void rcu_init_sched(void);
-extern void rcu_check_callbacks(int cpu, int user);
-extern void rcu_restart_cpu(int cpu);
-extern long rcu_batches_completed(void);
-
-/*
- * Return the number of RCU batches processed thus far. Useful for debug
- * and statistic. The _bh variant is identifcal to straight RCU
- */
-static inline long rcu_batches_completed_bh(void)
-{
- return rcu_batches_completed();
-}
-
-#ifdef CONFIG_RCU_TRACE
-struct rcupreempt_trace;
-extern long *rcupreempt_flipctr(int cpu);
-extern long rcupreempt_data_completed(void);
-extern int rcupreempt_flip_flag(int cpu);
-extern int rcupreempt_mb_flag(int cpu);
-extern char *rcupreempt_try_flip_state_name(void);
-extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu);
-#endif
-
-struct softirq_action;
-
-#ifdef CONFIG_NO_HZ
-extern void rcu_enter_nohz(void);
-extern void rcu_exit_nohz(void);
-#else
-# define rcu_enter_nohz() do { } while (0)
-# define rcu_exit_nohz() do { } while (0)
-#endif
-
-/*
- * A context switch is a grace period for rcupreempt synchronize_rcu()
- * only during early boot, before the scheduler has been initialized.
- * So, how the heck do we get a context switch? Well, if the caller
- * invokes synchronize_rcu(), they are willing to accept a context
- * switch, so we simply pretend that one happened.
- *
- * After boot, there might be a blocked or preempted task in an RCU
- * read-side critical section, so we cannot then take the fastpath.
- */
-static inline int rcu_blocking_is_gp(void)
-{
- return num_online_cpus() == 1 && !rcu_scheduler_active;
-}
-
-#endif /* __LINUX_RCUPREEMPT_H */
diff --git a/include/linux/rcupreempt_trace.h b/include/linux/rcupreempt_trace.h
deleted file mode 100644
index b99ae07..0000000
--- a/include/linux/rcupreempt_trace.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion (RT implementation)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Paul McKenney <paulmck@us.ibm.com>
- *
- * Based on the original work by Paul McKenney <paul.mckenney@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of the Preemptible Read-Copy Update mechanism see -
- * http://lwn.net/Articles/253651/
- */
-
-#ifndef __LINUX_RCUPREEMPT_TRACE_H
-#define __LINUX_RCUPREEMPT_TRACE_H
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/atomic.h>
-
-/*
- * PREEMPT_RCU data structures.
- */
-
-struct rcupreempt_trace {
- long next_length;
- long next_add;
- long wait_length;
- long wait_add;
- long done_length;
- long done_add;
- long done_remove;
- atomic_t done_invoked;
- long rcu_check_callbacks;
- atomic_t rcu_try_flip_1;
- atomic_t rcu_try_flip_e1;
- long rcu_try_flip_i1;
- long rcu_try_flip_ie1;
- long rcu_try_flip_g1;
- long rcu_try_flip_a1;
- long rcu_try_flip_ae1;
- long rcu_try_flip_a2;
- long rcu_try_flip_z1;
- long rcu_try_flip_ze1;
- long rcu_try_flip_z2;
- long rcu_try_flip_m1;
- long rcu_try_flip_me1;
- long rcu_try_flip_m2;
-};
-
-#ifdef CONFIG_RCU_TRACE
-#define RCU_TRACE(fn, arg) fn(arg);
-#else
-#define RCU_TRACE(fn, arg)
-#endif
-
-extern void rcupreempt_trace_move2done(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_move2wait(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_e1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_i1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_ie1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_g1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_a1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_ae1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_a2(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_z1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_ze1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_z2(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_m1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_me1(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_try_flip_m2(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_check_callbacks(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_done_remove(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_invoke(struct rcupreempt_trace *trace);
-extern void rcupreempt_trace_next_add(struct rcupreempt_trace *trace);
-
-#endif /* __LINUX_RCUPREEMPT_TRACE_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 5a51538..a893077 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -30,264 +30,57 @@
#ifndef __LINUX_RCUTREE_H
#define __LINUX_RCUTREE_H
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
+extern void rcu_sched_qs(int cpu);
+extern void rcu_bh_qs(int cpu);
-/*
- * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT.
- * In theory, it should be possible to add more levels straightforwardly.
- * In practice, this has not been tested, so there is probably some
- * bug somewhere.
- */
-#define MAX_RCU_LVLS 3
-#define RCU_FANOUT (CONFIG_RCU_FANOUT)
-#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT)
-#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT)
-
-#if NR_CPUS <= RCU_FANOUT
-# define NUM_RCU_LVLS 1
-# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (NR_CPUS)
-# define NUM_RCU_LVL_2 0
-# define NUM_RCU_LVL_3 0
-#elif NR_CPUS <= RCU_FANOUT_SQ
-# define NUM_RCU_LVLS 2
-# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT)
-# define NUM_RCU_LVL_2 (NR_CPUS)
-# define NUM_RCU_LVL_3 0
-#elif NR_CPUS <= RCU_FANOUT_CUBE
-# define NUM_RCU_LVLS 3
-# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ)
-# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT))
-# define NUM_RCU_LVL_3 NR_CPUS
-#else
-# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
-#endif /* #if (NR_CPUS) <= RCU_FANOUT */
-
-#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
-#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
-
-/*
- * Dynticks per-CPU state.
- */
-struct rcu_dynticks {
- int dynticks_nesting; /* Track nesting level, sort of. */
- int dynticks; /* Even value for dynticks-idle, else odd. */
- int dynticks_nmi; /* Even value for either dynticks-idle or */
- /* not in nmi handler, else odd. So this */
- /* remains even for nmi from irq handler. */
-};
-
-/*
- * Definition for node within the RCU grace-period-detection hierarchy.
- */
-struct rcu_node {
- spinlock_t lock;
- unsigned long qsmask; /* CPUs or groups that need to switch in */
- /* order for current grace period to proceed.*/
- unsigned long qsmaskinit;
- /* Per-GP initialization for qsmask. */
- unsigned long grpmask; /* Mask to apply to parent qsmask. */
- int grplo; /* lowest-numbered CPU or group here. */
- int grphi; /* highest-numbered CPU or group here. */
- u8 grpnum; /* CPU/group number for next level up. */
- u8 level; /* root is at level 0. */
- struct rcu_node *parent;
-} ____cacheline_internodealigned_in_smp;
-
-/* Index values for nxttail array in struct rcu_data. */
-#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */
-#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */
-#define RCU_NEXT_READY_TAIL 2 /* Also RCU_NEXT head. */
-#define RCU_NEXT_TAIL 3
-#define RCU_NEXT_SIZE 4
-
-/* Per-CPU data for read-copy update. */
-struct rcu_data {
- /* 1) quiescent-state and grace-period handling : */
- long completed; /* Track rsp->completed gp number */
- /* in order to detect GP end. */
- long gpnum; /* Highest gp number that this CPU */
- /* is aware of having started. */
- long passed_quiesc_completed;
- /* Value of completed at time of qs. */
- bool passed_quiesc; /* User-mode/idle loop etc. */
- bool qs_pending; /* Core waits for quiesc state. */
- bool beenonline; /* CPU online at least once. */
- struct rcu_node *mynode; /* This CPU's leaf of hierarchy */
- unsigned long grpmask; /* Mask to apply to leaf qsmask. */
-
- /* 2) batch handling */
- /*
- * If nxtlist is not NULL, it is partitioned as follows.
- * Any of the partitions might be empty, in which case the
- * pointer to that partition will be equal to the pointer for
- * the following partition. When the list is empty, all of
- * the nxttail elements point to nxtlist, which is NULL.
- *
- * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]):
- * Entries that might have arrived after current GP ended
- * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
- * Entries known to have arrived before current GP ended
- * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
- * Entries that batch # <= ->completed - 1: waiting for current GP
- * [nxtlist, *nxttail[RCU_DONE_TAIL]):
- * Entries that batch # <= ->completed
- * The grace period for these entries has completed, and
- * the other grace-period-completed entries may be moved
- * here temporarily in rcu_process_callbacks().
- */
- struct rcu_head *nxtlist;
- struct rcu_head **nxttail[RCU_NEXT_SIZE];
- long qlen; /* # of queued callbacks */
- long blimit; /* Upper limit on a processed batch */
-
-#ifdef CONFIG_NO_HZ
- /* 3) dynticks interface. */
- struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */
- int dynticks_snap; /* Per-GP tracking for dynticks. */
- int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */
-#endif /* #ifdef CONFIG_NO_HZ */
-
- /* 4) reasons this CPU needed to be kicked by force_quiescent_state */
-#ifdef CONFIG_NO_HZ
- unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */
-#endif /* #ifdef CONFIG_NO_HZ */
- unsigned long offline_fqs; /* Kicked due to being offline. */
- unsigned long resched_ipi; /* Sent a resched IPI. */
-
- /* 5) __rcu_pending() statistics. */
- long n_rcu_pending; /* rcu_pending() calls since boot. */
- long n_rp_qs_pending;
- long n_rp_cb_ready;
- long n_rp_cpu_needs_gp;
- long n_rp_gp_completed;
- long n_rp_gp_started;
- long n_rp_need_fqs;
- long n_rp_need_nothing;
-
- int cpu;
-};
-
-/* Values for signaled field in struct rcu_state. */
-#define RCU_GP_INIT 0 /* Grace period being initialized. */
-#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */
-#define RCU_FORCE_QS 2 /* Need to force quiescent state. */
-#ifdef CONFIG_NO_HZ
-#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK
-#else /* #ifdef CONFIG_NO_HZ */
-#define RCU_SIGNAL_INIT RCU_FORCE_QS
-#endif /* #else #ifdef CONFIG_NO_HZ */
-
-#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rsp->jiffies_stall */
-#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rsp->jiffies_stall */
-#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */
- /* to take at least one */
- /* scheduling clock irq */
- /* before ratting on them. */
-
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-/*
- * RCU global state, including node hierarchy. This hierarchy is
- * represented in "heap" form in a dense array. The root (first level)
- * of the hierarchy is in ->node[0] (referenced by ->level[0]), the second
- * level in ->node[1] through ->node[m] (->node[1] referenced by ->level[1]),
- * and the third level in ->node[m+1] and following (->node[m+1] referenced
- * by ->level[2]). The number of levels is determined by the number of
- * CPUs and by CONFIG_RCU_FANOUT. Small systems will have a "hierarchy"
- * consisting of a single rcu_node.
- */
-struct rcu_state {
- struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */
- struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */
- u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */
- u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */
- struct rcu_data *rda[NR_CPUS]; /* array of rdp pointers. */
-
- /* The following fields are guarded by the root rcu_node's lock. */
-
- u8 signaled ____cacheline_internodealigned_in_smp;
- /* Force QS state. */
- long gpnum; /* Current gp number. */
- long completed; /* # of last completed gp. */
- spinlock_t onofflock; /* exclude on/offline and */
- /* starting new GP. */
- spinlock_t fqslock; /* Only one task forcing */
- /* quiescent states. */
- unsigned long jiffies_force_qs; /* Time at which to invoke */
- /* force_quiescent_state(). */
- unsigned long n_force_qs; /* Number of calls to */
- /* force_quiescent_state(). */
- unsigned long n_force_qs_lh; /* ~Number of calls leaving */
- /* due to lock unavailable. */
- unsigned long n_force_qs_ngp; /* Number of calls leaving */
- /* due to no GP active. */
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
- unsigned long gp_start; /* Time at which GP started, */
- /* but in jiffies. */
- unsigned long jiffies_stall; /* Time at which to check */
- /* for CPU stalls. */
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-#ifdef CONFIG_NO_HZ
- long dynticks_completed; /* Value of completed @ snap. */
-#endif /* #ifdef CONFIG_NO_HZ */
-};
-
-extern void rcu_qsctr_inc(int cpu);
-extern void rcu_bh_qsctr_inc(int cpu);
-
-extern int rcu_pending(int cpu);
extern int rcu_needs_cpu(int cpu);
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern struct lockdep_map rcu_lock_map;
-# define rcu_read_acquire() \
- lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_)
-# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_)
-#else
-# define rcu_read_acquire() do { } while (0)
-# define rcu_read_release() do { } while (0)
-#endif
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+extern void __rcu_read_lock(void);
+extern void __rcu_read_unlock(void);
+extern void exit_rcu(void);
+
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
static inline void __rcu_read_lock(void)
{
preempt_disable();
- __acquire(RCU);
- rcu_read_acquire();
}
+
static inline void __rcu_read_unlock(void)
{
- rcu_read_release();
- __release(RCU);
preempt_enable();
}
+
+static inline void exit_rcu(void)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+
static inline void __rcu_read_lock_bh(void)
{
local_bh_disable();
- __acquire(RCU_BH);
- rcu_read_acquire();
}
static inline void __rcu_read_unlock_bh(void)
{
- rcu_read_release();
- __release(RCU_BH);
local_bh_enable();
}
#define __synchronize_sched() synchronize_rcu()
-#define call_rcu_sched(head, func) call_rcu(head, func)
+extern void call_rcu_sched(struct rcu_head *head,
+ void (*func)(struct rcu_head *rcu));
-static inline void rcu_init_sched(void)
+static inline void synchronize_rcu_expedited(void)
{
+ synchronize_sched_expedited();
+}
+
+static inline void synchronize_rcu_bh_expedited(void)
+{
+ synchronize_sched_expedited();
}
extern void __rcu_init(void);
@@ -296,6 +89,11 @@
extern long rcu_batches_completed(void);
extern long rcu_batches_completed_bh(void);
+extern long rcu_batches_completed_sched(void);
+
+static inline void rcu_init_sched(void)
+{
+}
#ifdef CONFIG_NO_HZ
void rcu_enter_nohz(void);
diff --git a/include/linux/rds.h b/include/linux/rds.h
index d91dc91..89d46e1a 100644
--- a/include/linux/rds.h
+++ b/include/linux/rds.h
@@ -147,6 +147,18 @@
u_int64_t inum;
} __attribute__((packed));
+struct rds_info_tcp_socket {
+ __be32 local_addr;
+ __be16 local_port;
+ __be32 peer_addr;
+ __be16 peer_port;
+ u_int64_t hdr_rem;
+ u_int64_t data_rem;
+ u_int32_t last_sent_nxt;
+ u_int32_t last_expected_una;
+ u_int32_t last_seen_una;
+} __attribute__((packed));
+
#define RDS_IB_GID_LEN 16
struct rds_info_rdma_connection {
__be32 src_addr;
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 278777fa..3392c59 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -6,20 +6,17 @@
* Copyright (C) 2007 Dmitry Torokhov
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/types.h>
@@ -47,6 +44,7 @@
RFKILL_TYPE_UWB,
RFKILL_TYPE_WIMAX,
RFKILL_TYPE_WWAN,
+ RFKILL_TYPE_GPS,
NUM_RFKILL_TYPES,
};
@@ -82,6 +80,20 @@
__u8 soft, hard;
} __packed;
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1 8
+
/* ioctl for turning off rfkill-input (if present) */
#define RFKILL_IOC_MAGIC 'R'
#define RFKILL_IOC_NOINPUT 1
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 29f8599..5fcc31e 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -75,20 +75,6 @@
}
/*
- * ring_buffer_event_discard can discard any event in the ring buffer.
- * it is up to the caller to protect against a reader from
- * consuming it or a writer from wrapping and replacing it.
- *
- * No external protection is needed if this is called before
- * the event is commited. But in that case it would be better to
- * use ring_buffer_discard_commit.
- *
- * Note, if an event that has not been committed is discarded
- * with ring_buffer_event_discard, it must still be committed.
- */
-void ring_buffer_event_discard(struct ring_buffer_event *event);
-
-/*
* ring_buffer_discard_commit will remove an event that has not
* ben committed yet. If this is used, then ring_buffer_unlock_commit
* must not be called on the discarded event. This function
@@ -154,8 +140,17 @@
void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu);
void ring_buffer_reset(struct ring_buffer *buffer);
+#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
int ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
struct ring_buffer *buffer_b, int cpu);
+#else
+static inline int
+ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
+ struct ring_buffer *buffer_b, int cpu)
+{
+ return -ENODEV;
+}
+#endif
int ring_buffer_empty(struct ring_buffer *buffer);
int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu);
@@ -170,7 +165,6 @@
unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu);
unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu);
unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu);
-unsigned long ring_buffer_nmi_dropped_cpu(struct ring_buffer *buffer, int cpu);
u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu);
void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index ba3254e..adf2068 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -104,7 +104,7 @@
RTM_NEWADDRLABEL = 72,
#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
RTM_DELADDRLABEL,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
+#define RTM_DELADDRLABEL RTM_DELADDRLABEL
RTM_GETADDRLABEL,
#define RTM_GETADDRLABEL RTM_GETADDRLABEL
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 0f1ea4a..f3d74bd 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -38,6 +38,8 @@
#define SCHED_BATCH 3
/* SCHED_ISO: reserved but not implemented yet */
#define SCHED_IDLE 5
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK 0x40000000
#ifdef __KERNEL__
@@ -796,18 +798,19 @@
#define SCHED_LOAD_SCALE_FUZZ SCHED_LOAD_SCALE
#ifdef CONFIG_SMP
-#define SD_LOAD_BALANCE 1 /* Do load balancing on this domain. */
-#define SD_BALANCE_NEWIDLE 2 /* Balance when about to become idle */
-#define SD_BALANCE_EXEC 4 /* Balance on exec */
-#define SD_BALANCE_FORK 8 /* Balance on fork, clone */
-#define SD_WAKE_IDLE 16 /* Wake to idle CPU on task wakeup */
-#define SD_WAKE_AFFINE 32 /* Wake task to waking CPU */
-#define SD_WAKE_BALANCE 64 /* Perform balancing at task wakeup */
-#define SD_SHARE_CPUPOWER 128 /* Domain members share cpu power */
-#define SD_POWERSAVINGS_BALANCE 256 /* Balance for power savings */
-#define SD_SHARE_PKG_RESOURCES 512 /* Domain members share cpu pkg resources */
-#define SD_SERIALIZE 1024 /* Only a single load balancing instance */
-#define SD_WAKE_IDLE_FAR 2048 /* Gain latency sacrificing cache hit */
+#define SD_LOAD_BALANCE 0x0001 /* Do load balancing on this domain. */
+#define SD_BALANCE_NEWIDLE 0x0002 /* Balance when about to become idle */
+#define SD_BALANCE_EXEC 0x0004 /* Balance on exec */
+#define SD_BALANCE_FORK 0x0008 /* Balance on fork, clone */
+#define SD_WAKE_IDLE 0x0010 /* Wake to idle CPU on task wakeup */
+#define SD_WAKE_AFFINE 0x0020 /* Wake task to waking CPU */
+#define SD_WAKE_BALANCE 0x0040 /* Perform balancing at task wakeup */
+#define SD_SHARE_CPUPOWER 0x0080 /* Domain members share cpu power */
+#define SD_POWERSAVINGS_BALANCE 0x0100 /* Balance for power savings */
+#define SD_SHARE_PKG_RESOURCES 0x0200 /* Domain members share cpu pkg resources */
+#define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */
+#define SD_WAKE_IDLE_FAR 0x0800 /* Gain latency sacrificing cache hit */
+#define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */
enum powersavings_balance_level {
POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */
@@ -827,7 +830,7 @@
if (sched_smt_power_savings)
return SD_POWERSAVINGS_BALANCE;
- return 0;
+ return SD_PREFER_SIBLING;
}
static inline int sd_balance_for_package_power(void)
@@ -835,7 +838,7 @@
if (sched_mc_power_savings | sched_smt_power_savings)
return SD_POWERSAVINGS_BALANCE;
- return 0;
+ return SD_PREFER_SIBLING;
}
/*
@@ -857,15 +860,9 @@
/*
* CPU power of this group, SCHED_LOAD_SCALE being max power for a
- * single CPU. This is read only (except for setup, hotplug CPU).
- * Note : Never change cpu_power without recompute its reciprocal
+ * single CPU.
*/
- unsigned int __cpu_power;
- /*
- * reciprocal value of cpu_power to avoid expensive divides
- * (see include/linux/reciprocal_div.h)
- */
- u32 reciprocal_cpu_power;
+ unsigned int cpu_power;
/*
* The CPUs this group covers.
@@ -918,6 +915,7 @@
unsigned int newidle_idx;
unsigned int wake_idx;
unsigned int forkexec_idx;
+ unsigned int smt_gain;
int flags; /* See SD_* */
enum sched_domain_level level;
@@ -1045,7 +1043,6 @@
struct rq *busiest, struct sched_domain *sd,
enum cpu_idle_type idle);
void (*pre_schedule) (struct rq *this_rq, struct task_struct *task);
- int (*needs_post_schedule) (struct rq *this_rq);
void (*post_schedule) (struct rq *this_rq);
void (*task_wake_up) (struct rq *this_rq, struct task_struct *task);
@@ -1110,6 +1107,8 @@
u64 wait_max;
u64 wait_count;
u64 wait_sum;
+ u64 iowait_count;
+ u64 iowait_sum;
u64 sleep_start;
u64 sleep_max;
@@ -1163,6 +1162,8 @@
#endif
};
+struct rcu_node;
+
struct task_struct {
volatile long state; /* -1 unrunnable, 0 runnable, >0 stopped */
void *stack;
@@ -1206,10 +1207,12 @@
unsigned int policy;
cpumask_t cpus_allowed;
-#ifdef CONFIG_PREEMPT_RCU
+#ifdef CONFIG_TREE_PREEMPT_RCU
int rcu_read_lock_nesting;
- int rcu_flipctr_idx;
-#endif /* #ifdef CONFIG_PREEMPT_RCU */
+ char rcu_read_unlock_special;
+ struct rcu_node *rcu_blocked_node;
+ struct list_head rcu_node_entry;
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
struct sched_info sched_info;
@@ -1230,11 +1233,19 @@
unsigned did_exec:1;
unsigned in_execve:1; /* Tell the LSMs that the process is doing an
* execve */
+ unsigned in_iowait:1;
+
+
+ /* Revert to default priority/policy when forking */
+ unsigned sched_reset_on_fork:1;
+
pid_t pid;
pid_t tgid;
+#ifdef CONFIG_CC_STACKPROTECTOR
/* Canary value for the -fstack-protector gcc feature */
unsigned long stack_canary;
+#endif
/*
* pointers to (original) parent process, youngest child, younger sibling,
@@ -1292,6 +1303,7 @@
struct mutex cred_guard_mutex; /* guard against foreign influences on
* credential calculations
* (notably. ptrace) */
+ struct cred *replacement_session_keyring; /* for KEYCTL_SESSION_TO_PARENT */
char comm[TASK_COMM_LEN]; /* executable name excluding path
- access with [gs]et_task_comm (which lock
@@ -1724,6 +1736,28 @@
#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
#define used_math() tsk_used_math(current)
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+#define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
+#define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */
+#define RCU_READ_UNLOCK_GOT_QS (1 << 2) /* CPU has responded to RCU core. */
+
+static inline void rcu_copy_process(struct task_struct *p)
+{
+ p->rcu_read_lock_nesting = 0;
+ p->rcu_read_unlock_special = 0;
+ p->rcu_blocked_node = NULL;
+ INIT_LIST_HEAD(&p->rcu_node_entry);
+}
+
+#else
+
+static inline void rcu_copy_process(struct task_struct *p)
+{
+}
+
+#endif
+
#ifdef CONFIG_SMP
extern int set_cpus_allowed_ptr(struct task_struct *p,
const struct cpumask *new_mask);
@@ -1813,11 +1847,12 @@
extern unsigned int sysctl_sched_wakeup_granularity;
extern unsigned int sysctl_sched_shares_ratelimit;
extern unsigned int sysctl_sched_shares_thresh;
-#ifdef CONFIG_SCHED_DEBUG
extern unsigned int sysctl_sched_child_runs_first;
+#ifdef CONFIG_SCHED_DEBUG
extern unsigned int sysctl_sched_features;
extern unsigned int sysctl_sched_migration_cost;
extern unsigned int sysctl_sched_nr_migrate;
+extern unsigned int sysctl_sched_time_avg;
extern unsigned int sysctl_timer_migration;
int sched_nr_latency_handler(struct ctl_table *table, int write,
@@ -2077,7 +2112,7 @@
#define for_each_process(p) \
for (p = &init_task ; (p = next_task(p)) != &init_task ; )
-extern bool is_single_threaded(struct task_struct *);
+extern bool current_is_single_threaded(void);
/*
* Careful: do_each_thread/while_each_thread is a double loop so
@@ -2281,23 +2316,31 @@
* cond_resched_softirq() will enable bhs before scheduling.
*/
extern int _cond_resched(void);
-#ifdef CONFIG_PREEMPT_BKL
-static inline int cond_resched(void)
-{
- return 0;
-}
+
+#define cond_resched() ({ \
+ __might_sleep(__FILE__, __LINE__, 0); \
+ _cond_resched(); \
+})
+
+extern int __cond_resched_lock(spinlock_t *lock);
+
+#ifdef CONFIG_PREEMPT
+#define PREEMPT_LOCK_OFFSET PREEMPT_OFFSET
#else
-static inline int cond_resched(void)
-{
- return _cond_resched();
-}
+#define PREEMPT_LOCK_OFFSET 0
#endif
-extern int cond_resched_lock(spinlock_t * lock);
-extern int cond_resched_softirq(void);
-static inline int cond_resched_bkl(void)
-{
- return _cond_resched();
-}
+
+#define cond_resched_lock(lock) ({ \
+ __might_sleep(__FILE__, __LINE__, PREEMPT_LOCK_OFFSET); \
+ __cond_resched_lock(lock); \
+})
+
+extern int __cond_resched_softirq(void);
+
+#define cond_resched_softirq() ({ \
+ __might_sleep(__FILE__, __LINE__, SOFTIRQ_OFFSET); \
+ __cond_resched_softirq(); \
+})
/*
* Does a critical section need to be broken due to another
diff --git a/include/linux/security.h b/include/linux/security.h
index 1f16eea..d050b66 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -53,7 +53,7 @@
extern int cap_capable(struct task_struct *tsk, const struct cred *cred,
int cap, int audit);
extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_access_check(struct task_struct *child, unsigned int mode);
extern int cap_ptrace_traceme(struct task_struct *parent);
extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern int cap_capset(struct cred *new, const struct cred *old,
@@ -653,6 +653,11 @@
* manual page for definitions of the @clone_flags.
* @clone_flags contains the flags indicating what should be shared.
* Return 0 if permission is granted.
+ * @cred_alloc_blank:
+ * @cred points to the credentials.
+ * @gfp indicates the atomicity of any memory allocations.
+ * Only allocate sufficient memory and attach to @cred such that
+ * cred_transfer() will not get ENOMEM.
* @cred_free:
* @cred points to the credentials.
* Deallocate and clear the cred->security field in a set of credentials.
@@ -665,6 +670,10 @@
* @new points to the new credentials.
* @old points to the original credentials.
* Install a new set of credentials.
+ * @cred_transfer:
+ * @new points to the new credentials.
+ * @old points to the original credentials.
+ * Transfer data from original creds to new creds
* @kernel_act_as:
* Set the credentials for a kernel service to act as (subjective context).
* @new points to the credentials to be modified.
@@ -678,6 +687,10 @@
* @inode points to the inode to use as a reference.
* The current task must be the one that nominated @inode.
* Return 0 if successful.
+ * @kernel_module_request:
+ * Ability to trigger the kernel to automatically upcall to userspace for
+ * userspace to load a kernel module with the given name.
+ * Return 0 if successful.
* @task_setuid:
* Check permission before setting one or more of the user identity
* attributes of the current process. The @flags parameter indicates
@@ -994,6 +1007,17 @@
* Sets the connection's peersid to the secmark on skb.
* @req_classify_flow:
* Sets the flow's sid to the openreq sid.
+ * @tun_dev_create:
+ * Check permissions prior to creating a new TUN device.
+ * @tun_dev_post_create:
+ * This hook allows a module to update or allocate a per-socket security
+ * structure.
+ * @sk contains the newly created sock structure.
+ * @tun_dev_attach:
+ * Check permissions prior to attaching to a persistent TUN device. This
+ * hook can also be used by the module to update any security state
+ * associated with the TUN device's sock structure.
+ * @sk contains the existing sock structure.
*
* Security hooks for XFRM operations.
*
@@ -1088,6 +1112,13 @@
* Return the length of the string (including terminating NUL) or -ve if
* an error.
* May also return 0 (and a NULL buffer pointer) if there is no label.
+ * @key_session_to_parent:
+ * Forcibly assign the session keyring from a process to its parent
+ * process.
+ * @cred: Pointer to process's credentials
+ * @parent_cred: Pointer to parent process's credentials
+ * @keyring: Proposed new session keyring
+ * Return 0 if permission is granted, -ve error otherwise.
*
* Security hooks affecting all System V IPC operations.
*
@@ -1229,7 +1260,7 @@
* @alter contains the flag indicating whether changes are to be made.
* Return 0 if permission is granted.
*
- * @ptrace_may_access:
+ * @ptrace_access_check:
* Check permission before allowing the current process to trace the
* @child process.
* Security modules may also want to perform a process tracing check
@@ -1244,7 +1275,7 @@
* Check that the @parent process has sufficient permission to trace the
* current process before allowing the current process to present itself
* to the @parent process for tracing.
- * The parent process will still have to undergo the ptrace_may_access
+ * The parent process will still have to undergo the ptrace_access_check
* checks before it is allowed to trace this one.
* @parent contains the task_struct structure for debugger process.
* Return 0 if permission is granted.
@@ -1351,12 +1382,47 @@
* audit_rule_init.
* @rule contains the allocated rule
*
+ * @inode_notifysecctx:
+ * Notify the security module of what the security context of an inode
+ * should be. Initializes the incore security context managed by the
+ * security module for this inode. Example usage: NFS client invokes
+ * this hook to initialize the security context in its incore inode to the
+ * value provided by the server for the file when the server returned the
+ * file's attributes to the client.
+ *
+ * Must be called with inode->i_mutex locked.
+ *
+ * @inode we wish to set the security context of.
+ * @ctx contains the string which we wish to set in the inode.
+ * @ctxlen contains the length of @ctx.
+ *
+ * @inode_setsecctx:
+ * Change the security context of an inode. Updates the
+ * incore security context managed by the security module and invokes the
+ * fs code as needed (via __vfs_setxattr_noperm) to update any backing
+ * xattrs that represent the context. Example usage: NFS server invokes
+ * this hook to change the security context in its incore inode and on the
+ * backing filesystem to a value provided by the client on a SETATTR
+ * operation.
+ *
+ * Must be called with inode->i_mutex locked.
+ *
+ * @dentry contains the inode we wish to set the security context of.
+ * @ctx contains the string which we wish to set in the inode.
+ * @ctxlen contains the length of @ctx.
+ *
+ * @inode_getsecctx:
+ * Returns a string containing all relavent security context information
+ *
+ * @inode we wish to set the security context of.
+ * @ctx is a pointer in which to place the allocated security context.
+ * @ctxlen points to the place to put the length of @ctx.
* This is the main security structure.
*/
struct security_operations {
char name[SECURITY_NAME_MAX + 1];
- int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+ int (*ptrace_access_check) (struct task_struct *child, unsigned int mode);
int (*ptrace_traceme) (struct task_struct *parent);
int (*capget) (struct task_struct *target,
kernel_cap_t *effective,
@@ -1483,12 +1549,15 @@
int (*dentry_open) (struct file *file, const struct cred *cred);
int (*task_create) (unsigned long clone_flags);
+ int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp);
void (*cred_free) (struct cred *cred);
int (*cred_prepare)(struct cred *new, const struct cred *old,
gfp_t gfp);
void (*cred_commit)(struct cred *new, const struct cred *old);
+ void (*cred_transfer)(struct cred *new, const struct cred *old);
int (*kernel_act_as)(struct cred *new, u32 secid);
int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
+ int (*kernel_module_request)(void);
int (*task_setuid) (uid_t id0, uid_t id1, uid_t id2, int flags);
int (*task_fix_setuid) (struct cred *new, const struct cred *old,
int flags);
@@ -1556,6 +1625,10 @@
int (*secctx_to_secid) (const char *secdata, u32 seclen, u32 *secid);
void (*release_secctx) (char *secdata, u32 seclen);
+ int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
+ int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
+ int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
+
#ifdef CONFIG_SECURITY_NETWORK
int (*unix_stream_connect) (struct socket *sock,
struct socket *other, struct sock *newsk);
@@ -1592,6 +1665,9 @@
void (*inet_csk_clone) (struct sock *newsk, const struct request_sock *req);
void (*inet_conn_established) (struct sock *sk, struct sk_buff *skb);
void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl);
+ int (*tun_dev_create)(void);
+ void (*tun_dev_post_create)(struct sock *sk);
+ int (*tun_dev_attach)(struct sock *sk);
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
@@ -1620,6 +1696,9 @@
const struct cred *cred,
key_perm_t perm);
int (*key_getsecurity)(struct key *key, char **_buffer);
+ int (*key_session_to_parent)(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key);
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
@@ -1637,7 +1716,7 @@
extern int register_security(struct security_operations *ops);
/* Security operations */
-int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_access_check(struct task_struct *child, unsigned int mode);
int security_ptrace_traceme(struct task_struct *parent);
int security_capget(struct task_struct *target,
kernel_cap_t *effective,
@@ -1736,11 +1815,14 @@
int security_file_receive(struct file *file);
int security_dentry_open(struct file *file, const struct cred *cred);
int security_task_create(unsigned long clone_flags);
+int security_cred_alloc_blank(struct cred *cred, gfp_t gfp);
void security_cred_free(struct cred *cred);
int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp);
void security_commit_creds(struct cred *new, const struct cred *old);
+void security_transfer_creds(struct cred *new, const struct cred *old);
int security_kernel_act_as(struct cred *new, u32 secid);
int security_kernel_create_files_as(struct cred *new, struct inode *inode);
+int security_kernel_module_request(void);
int security_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags);
int security_task_fix_setuid(struct cred *new, const struct cred *old,
int flags);
@@ -1796,6 +1878,9 @@
int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid);
void security_release_secctx(char *secdata, u32 seclen);
+int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
+int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
+int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
#else /* CONFIG_SECURITY */
struct security_mnt_opts {
};
@@ -1818,10 +1903,10 @@
return 0;
}
-static inline int security_ptrace_may_access(struct task_struct *child,
+static inline int security_ptrace_access_check(struct task_struct *child,
unsigned int mode)
{
- return cap_ptrace_may_access(child, mode);
+ return cap_ptrace_access_check(child, mode);
}
static inline int security_ptrace_traceme(struct task_struct *parent)
@@ -2266,6 +2351,11 @@
return 0;
}
+static inline int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ return 0;
+}
+
static inline void security_cred_free(struct cred *cred)
{ }
@@ -2281,6 +2371,11 @@
{
}
+static inline void security_transfer_creds(struct cred *new,
+ const struct cred *old)
+{
+}
+
static inline int security_kernel_act_as(struct cred *cred, u32 secid)
{
return 0;
@@ -2292,6 +2387,11 @@
return 0;
}
+static inline int security_kernel_module_request(void)
+{
+ return 0;
+}
+
static inline int security_task_setuid(uid_t id0, uid_t id1, uid_t id2,
int flags)
{
@@ -2537,6 +2637,19 @@
static inline void security_release_secctx(char *secdata, u32 seclen)
{
}
+
+static inline int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return -EOPNOTSUPP;
+}
+static inline int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return -EOPNOTSUPP;
+}
+static inline int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ return -EOPNOTSUPP;
+}
#endif /* CONFIG_SECURITY */
#ifdef CONFIG_SECURITY_NETWORK
@@ -2575,6 +2688,9 @@
const struct request_sock *req);
void security_inet_conn_established(struct sock *sk,
struct sk_buff *skb);
+int security_tun_dev_create(void);
+void security_tun_dev_post_create(struct sock *sk);
+int security_tun_dev_attach(struct sock *sk);
#else /* CONFIG_SECURITY_NETWORK */
static inline int security_unix_stream_connect(struct socket *sock,
@@ -2725,6 +2841,20 @@
struct sk_buff *skb)
{
}
+
+static inline int security_tun_dev_create(void)
+{
+ return 0;
+}
+
+static inline void security_tun_dev_post_create(struct sock *sk)
+{
+}
+
+static inline int security_tun_dev_attach(struct sock *sk)
+{
+ return 0;
+}
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
@@ -2881,6 +3011,9 @@
int security_key_permission(key_ref_t key_ref,
const struct cred *cred, key_perm_t perm);
int security_key_getsecurity(struct key *key, char **_buffer);
+int security_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key);
#else
@@ -2908,6 +3041,13 @@
return 0;
}
+static inline int security_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key)
+{
+ return 0;
+}
+
#endif
#endif /* CONFIG_KEYS */
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index abff6c9..6d3f2f4 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -39,7 +39,7 @@
}
#ifdef CONFIG_TMPFS_POSIX_ACL
-int shmem_permission(struct inode *, int);
+int shmem_check_acl(struct inode *, int);
int shmem_acl_init(struct inode *, struct inode *);
extern struct xattr_handler shmem_xattr_acl_access_handler;
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index f2c69a2..df7b23a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -304,7 +304,6 @@
* @tc_index: Traffic control index
* @tc_verd: traffic control verdict
* @ndisc_nodetype: router type (from link layer)
- * @do_not_encrypt: set to prevent encryption of this frame
* @dma_cookie: a cookie to one of several possible DMA operations
* done by skb DMA functions
* @secmark: security marking
@@ -380,12 +379,9 @@
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
-#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
- __u8 do_not_encrypt:1;
-#endif
kmemcheck_bitfield_end(flags2);
- /* 0/13/14 bit hole */
+ /* 0/14 bit hole */
#ifdef CONFIG_NET_DMA
dma_cookie_t dma_cookie;
diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h
index bb5368d..0ec00b3 100644
--- a/include/linux/slob_def.h
+++ b/include/linux/slob_def.h
@@ -34,9 +34,4 @@
return kmalloc(size, flags);
}
-static inline void kmem_cache_init_late(void)
-{
- /* Nothing to do */
-}
-
#endif /* __LINUX_SLOB_DEF_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index c1c862b..5ad70a6 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -153,12 +153,10 @@
if (size <= KMALLOC_MIN_SIZE)
return KMALLOC_SHIFT_LOW;
-#if KMALLOC_MIN_SIZE <= 64
- if (size > 64 && size <= 96)
+ if (KMALLOC_MIN_SIZE <= 32 && size > 64 && size <= 96)
return 1;
- if (size > 128 && size <= 192)
+ if (KMALLOC_MIN_SIZE <= 64 && size > 128 && size <= 192)
return 2;
-#endif
if (size <= 8) return 3;
if (size <= 16) return 4;
if (size <= 32) return 5;
@@ -304,6 +302,4 @@
}
#endif
-void __init kmem_cache_init_late(void);
-
#endif /* _LINUX_SLUB_DEF_H */
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 4be57ab..f0ca7a7 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -143,15 +143,6 @@
*/
#define spin_unlock_wait(lock) __raw_spin_unlock_wait(&(lock)->raw_lock)
-/*
- * Pull the _spin_*()/_read_*()/_write_*() functions/declarations:
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-# include <linux/spinlock_api_smp.h>
-#else
-# include <linux/spinlock_api_up.h>
-#endif
-
#ifdef CONFIG_DEBUG_SPINLOCK
extern void _raw_spin_lock(spinlock_t *lock);
#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
@@ -268,50 +259,16 @@
#define spin_lock_irq(lock) _spin_lock_irq(lock)
#define spin_lock_bh(lock) _spin_lock_bh(lock)
-
#define read_lock_irq(lock) _read_lock_irq(lock)
#define read_lock_bh(lock) _read_lock_bh(lock)
-
#define write_lock_irq(lock) _write_lock_irq(lock)
#define write_lock_bh(lock) _write_lock_bh(lock)
-
-/*
- * We inline the unlock functions in the nondebug case:
- */
-#if defined(CONFIG_DEBUG_SPINLOCK) || defined(CONFIG_PREEMPT) || \
- !defined(CONFIG_SMP)
-# define spin_unlock(lock) _spin_unlock(lock)
-# define read_unlock(lock) _read_unlock(lock)
-# define write_unlock(lock) _write_unlock(lock)
-# define spin_unlock_irq(lock) _spin_unlock_irq(lock)
-# define read_unlock_irq(lock) _read_unlock_irq(lock)
-# define write_unlock_irq(lock) _write_unlock_irq(lock)
-#else
-# define spin_unlock(lock) \
- do {__raw_spin_unlock(&(lock)->raw_lock); __release(lock); } while (0)
-# define read_unlock(lock) \
- do {__raw_read_unlock(&(lock)->raw_lock); __release(lock); } while (0)
-# define write_unlock(lock) \
- do {__raw_write_unlock(&(lock)->raw_lock); __release(lock); } while (0)
-# define spin_unlock_irq(lock) \
-do { \
- __raw_spin_unlock(&(lock)->raw_lock); \
- __release(lock); \
- local_irq_enable(); \
-} while (0)
-# define read_unlock_irq(lock) \
-do { \
- __raw_read_unlock(&(lock)->raw_lock); \
- __release(lock); \
- local_irq_enable(); \
-} while (0)
-# define write_unlock_irq(lock) \
-do { \
- __raw_write_unlock(&(lock)->raw_lock); \
- __release(lock); \
- local_irq_enable(); \
-} while (0)
-#endif
+#define spin_unlock(lock) _spin_unlock(lock)
+#define read_unlock(lock) _read_unlock(lock)
+#define write_unlock(lock) _write_unlock(lock)
+#define spin_unlock_irq(lock) _spin_unlock_irq(lock)
+#define read_unlock_irq(lock) _read_unlock_irq(lock)
+#define write_unlock_irq(lock) _write_unlock_irq(lock)
#define spin_unlock_irqrestore(lock, flags) \
do { \
@@ -380,4 +337,13 @@
*/
#define spin_can_lock(lock) (!spin_is_locked(lock))
+/*
+ * Pull the _spin_*()/_read_*()/_write_*() functions/declarations:
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+# include <linux/spinlock_api_smp.h>
+#else
+# include <linux/spinlock_api_up.h>
+#endif
+
#endif /* __LINUX_SPINLOCK_H */
diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h
index d79845d..7a7e18f 100644
--- a/include/linux/spinlock_api_smp.h
+++ b/include/linux/spinlock_api_smp.h
@@ -60,4 +60,398 @@
void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
__releases(lock);
+/*
+ * We inline the unlock functions in the nondebug case:
+ */
+#if !defined(CONFIG_DEBUG_SPINLOCK) && !defined(CONFIG_PREEMPT)
+#define __always_inline__spin_unlock
+#define __always_inline__read_unlock
+#define __always_inline__write_unlock
+#define __always_inline__spin_unlock_irq
+#define __always_inline__read_unlock_irq
+#define __always_inline__write_unlock_irq
+#endif
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#ifndef CONFIG_GENERIC_LOCKBREAK
+
+#ifdef __always_inline__spin_lock
+#define _spin_lock(lock) __spin_lock(lock)
+#endif
+
+#ifdef __always_inline__read_lock
+#define _read_lock(lock) __read_lock(lock)
+#endif
+
+#ifdef __always_inline__write_lock
+#define _write_lock(lock) __write_lock(lock)
+#endif
+
+#ifdef __always_inline__spin_lock_bh
+#define _spin_lock_bh(lock) __spin_lock_bh(lock)
+#endif
+
+#ifdef __always_inline__read_lock_bh
+#define _read_lock_bh(lock) __read_lock_bh(lock)
+#endif
+
+#ifdef __always_inline__write_lock_bh
+#define _write_lock_bh(lock) __write_lock_bh(lock)
+#endif
+
+#ifdef __always_inline__spin_lock_irq
+#define _spin_lock_irq(lock) __spin_lock_irq(lock)
+#endif
+
+#ifdef __always_inline__read_lock_irq
+#define _read_lock_irq(lock) __read_lock_irq(lock)
+#endif
+
+#ifdef __always_inline__write_lock_irq
+#define _write_lock_irq(lock) __write_lock_irq(lock)
+#endif
+
+#ifdef __always_inline__spin_lock_irqsave
+#define _spin_lock_irqsave(lock) __spin_lock_irqsave(lock)
+#endif
+
+#ifdef __always_inline__read_lock_irqsave
+#define _read_lock_irqsave(lock) __read_lock_irqsave(lock)
+#endif
+
+#ifdef __always_inline__write_lock_irqsave
+#define _write_lock_irqsave(lock) __write_lock_irqsave(lock)
+#endif
+
+#endif /* !CONFIG_GENERIC_LOCKBREAK */
+
+#ifdef __always_inline__spin_trylock
+#define _spin_trylock(lock) __spin_trylock(lock)
+#endif
+
+#ifdef __always_inline__read_trylock
+#define _read_trylock(lock) __read_trylock(lock)
+#endif
+
+#ifdef __always_inline__write_trylock
+#define _write_trylock(lock) __write_trylock(lock)
+#endif
+
+#ifdef __always_inline__spin_trylock_bh
+#define _spin_trylock_bh(lock) __spin_trylock_bh(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock
+#define _spin_unlock(lock) __spin_unlock(lock)
+#endif
+
+#ifdef __always_inline__read_unlock
+#define _read_unlock(lock) __read_unlock(lock)
+#endif
+
+#ifdef __always_inline__write_unlock
+#define _write_unlock(lock) __write_unlock(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock_bh
+#define _spin_unlock_bh(lock) __spin_unlock_bh(lock)
+#endif
+
+#ifdef __always_inline__read_unlock_bh
+#define _read_unlock_bh(lock) __read_unlock_bh(lock)
+#endif
+
+#ifdef __always_inline__write_unlock_bh
+#define _write_unlock_bh(lock) __write_unlock_bh(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock_irq
+#define _spin_unlock_irq(lock) __spin_unlock_irq(lock)
+#endif
+
+#ifdef __always_inline__read_unlock_irq
+#define _read_unlock_irq(lock) __read_unlock_irq(lock)
+#endif
+
+#ifdef __always_inline__write_unlock_irq
+#define _write_unlock_irq(lock) __write_unlock_irq(lock)
+#endif
+
+#ifdef __always_inline__spin_unlock_irqrestore
+#define _spin_unlock_irqrestore(lock, flags) __spin_unlock_irqrestore(lock, flags)
+#endif
+
+#ifdef __always_inline__read_unlock_irqrestore
+#define _read_unlock_irqrestore(lock, flags) __read_unlock_irqrestore(lock, flags)
+#endif
+
+#ifdef __always_inline__write_unlock_irqrestore
+#define _write_unlock_irqrestore(lock, flags) __write_unlock_irqrestore(lock, flags)
+#endif
+
+#endif /* CONFIG_DEBUG_SPINLOCK */
+
+static inline int __spin_trylock(spinlock_t *lock)
+{
+ preempt_disable();
+ if (_raw_spin_trylock(lock)) {
+ spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable();
+ return 0;
+}
+
+static inline int __read_trylock(rwlock_t *lock)
+{
+ preempt_disable();
+ if (_raw_read_trylock(lock)) {
+ rwlock_acquire_read(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable();
+ return 0;
+}
+
+static inline int __write_trylock(rwlock_t *lock)
+{
+ preempt_disable();
+ if (_raw_write_trylock(lock)) {
+ rwlock_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable();
+ return 0;
+}
+
+/*
+ * If lockdep is enabled then we use the non-preemption spin-ops
+ * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
+ * not re-enabled during lock-acquire (which the preempt-spin-ops do):
+ */
+#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
+
+static inline void __read_lock(rwlock_t *lock)
+{
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+}
+
+static inline unsigned long __spin_lock_irqsave(spinlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ /*
+ * On lockdep we dont want the hand-coded irq-enable of
+ * _raw_spin_lock_flags() code, because lockdep assumes
+ * that interrupts are not re-enabled during lock-acquire:
+ */
+#ifdef CONFIG_LOCKDEP
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+#else
+ _raw_spin_lock_flags(lock, &flags);
+#endif
+ return flags;
+}
+
+static inline void __spin_lock_irq(spinlock_t *lock)
+{
+ local_irq_disable();
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+
+static inline void __spin_lock_bh(spinlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+
+static inline unsigned long __read_lock_irqsave(rwlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED_FLAGS(lock, _raw_read_trylock, _raw_read_lock,
+ _raw_read_lock_flags, &flags);
+ return flags;
+}
+
+static inline void __read_lock_irq(rwlock_t *lock)
+{
+ local_irq_disable();
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+}
+
+static inline void __read_lock_bh(rwlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+}
+
+static inline unsigned long __write_lock_irqsave(rwlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED_FLAGS(lock, _raw_write_trylock, _raw_write_lock,
+ _raw_write_lock_flags, &flags);
+ return flags;
+}
+
+static inline void __write_lock_irq(rwlock_t *lock)
+{
+ local_irq_disable();
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+}
+
+static inline void __write_lock_bh(rwlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+}
+
+static inline void __spin_lock(spinlock_t *lock)
+{
+ preempt_disable();
+ spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+}
+
+static inline void __write_lock(rwlock_t *lock)
+{
+ preempt_disable();
+ rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+ LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+}
+
+#endif /* CONFIG_PREEMPT */
+
+static inline void __spin_unlock(spinlock_t *lock)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ preempt_enable();
+}
+
+static inline void __write_unlock(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ preempt_enable();
+}
+
+static inline void __read_unlock(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ preempt_enable();
+}
+
+static inline void __spin_unlock_irqrestore(spinlock_t *lock,
+ unsigned long flags)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
+static inline void __spin_unlock_irq(spinlock_t *lock)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ local_irq_enable();
+ preempt_enable();
+}
+
+static inline void __spin_unlock_bh(spinlock_t *lock)
+{
+ spin_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_spin_unlock(lock);
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline void __read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
+static inline void __read_unlock_irq(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ local_irq_enable();
+ preempt_enable();
+}
+
+static inline void __read_unlock_bh(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_read_unlock(lock);
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline void __write_unlock_irqrestore(rwlock_t *lock,
+ unsigned long flags)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
+static inline void __write_unlock_irq(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ local_irq_enable();
+ preempt_enable();
+}
+
+static inline void __write_unlock_bh(rwlock_t *lock)
+{
+ rwlock_release(&lock->dep_map, 1, _RET_IP_);
+ _raw_write_unlock(lock);
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline int __spin_trylock_bh(spinlock_t *lock)
+{
+ local_bh_disable();
+ preempt_disable();
+ if (_raw_spin_trylock(lock)) {
+ spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+ return 1;
+ }
+ preempt_enable_no_resched();
+ local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ return 0;
+}
+
#endif /* __LINUX_SPINLOCK_API_SMP_H */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 5ae8fa2..3d0a9ff 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -27,24 +27,54 @@
u8 et1mdcport; /* MDIO for enet1 */
u8 board_rev; /* Board revision number from SPROM. */
u8 country_code; /* Country Code */
- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
u16 pa0b1;
u16 pa0b2;
u16 pa1b0;
u16 pa1b1;
u16 pa1b2;
+ u16 pa1lob0;
+ u16 pa1lob1;
+ u16 pa1lob2;
+ u16 pa1hib0;
+ u16 pa1hib1;
+ u16 pa1hib2;
u8 gpio0; /* GPIO pin 0 */
u8 gpio1; /* GPIO pin 1 */
u8 gpio2; /* GPIO pin 2 */
u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
u8 itssi_a; /* Idle TSSI Target for A-PHY */
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
- u16 boardflags_lo; /* Boardflags (low 16 bits) */
- u16 boardflags_hi; /* Boardflags (high 16 bits) */
+ u8 tri2g; /* 2.4GHz TX isolation */
+ u8 tri5gl; /* 5.2GHz TX isolation */
+ u8 tri5g; /* 5.3GHz TX isolation */
+ u8 tri5gh; /* 5.8GHz TX isolation */
+ u8 rxpo2g; /* 2GHz RX power offset */
+ u8 rxpo5g; /* 5GHz RX power offset */
+ u8 rssisav2g; /* 2GHz RSSI params */
+ u8 rssismc2g;
+ u8 rssismf2g;
+ u8 bxa2g; /* 2GHz BX arch */
+ u8 rssisav5g; /* 5GHz RSSI params */
+ u8 rssismc5g;
+ u8 rssismf5g;
+ u8 bxa5g; /* 5GHz BX arch */
+ u16 cck2gpo; /* CCK power offset */
+ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
+ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
+ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
+ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
+ u16 boardflags_lo; /* Board flags (bits 0-15) */
+ u16 boardflags_hi; /* Board flags (bits 16-31) */
+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
+ /* TODO store board flags in a single u64 */
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
@@ -58,7 +88,7 @@
} ghz5; /* 5GHz band */
} antenna_gain;
- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
};
/* Information about the PCB the circuitry is soldered on. */
@@ -208,6 +238,7 @@
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
+ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
};
/* board_vendor */
@@ -240,8 +271,12 @@
/* The core in the basic address register window. (PCI bus only) */
struct ssb_device *mapped_device;
- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
- u8 mapped_pcmcia_seg;
+ union {
+ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+ u8 mapped_pcmcia_seg;
+ /* Current SSB base address window for SDIO. */
+ u32 sdio_sbaddr;
+ };
/* Lock for core and segment switching.
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
spinlock_t bar_lock;
@@ -252,6 +287,11 @@
struct pci_dev *host_pci;
/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
struct pcmcia_device *host_pcmcia;
+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+ struct sdio_func *host_sdio;
+
+ /* See enum ssb_quirks */
+ unsigned int quirks;
#ifdef CONFIG_SSB_SPROM
/* Mutex to protect the SPROM writing. */
@@ -306,6 +346,11 @@
#endif /* DEBUG */
};
+enum ssb_quirks {
+ /* SDIO connected card requires performing a read after writing a 32-bit value */
+ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
+};
+
/* The initialization-invariants. */
struct ssb_init_invariants {
/* Versioning information about the PCB. */
@@ -336,6 +381,12 @@
struct pcmcia_device *pcmcia_dev,
unsigned long baseaddr);
#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
+ struct sdio_func *sdio_func,
+ unsigned int quirks);
+#endif /* CONFIG_SSB_SDIOHOST */
+
extern void ssb_bus_unregister(struct ssb_bus *bus);
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index d3b1d18..4e27acf 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -629,5 +629,15 @@
/* PMU support */
extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+enum ssb_pmu_ldo_volt_id {
+ LDO_PAREF = 0,
+ LDO_VOLT1,
+ LDO_VOLT2,
+ LDO_VOLT3,
+};
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ enum ssb_pmu_ldo_volt_id id, u32 voltage);
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
#endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index a01b982..9ae9082 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -162,7 +162,7 @@
/* SPROM shadow area. If not otherwise noted, fields are
* two bytes wide. Note that the SPROM can _only_ be read
- * in two-byte quantinies.
+ * in two-byte quantities.
*/
#define SSB_SPROMSIZE_WORDS 64
#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
@@ -327,8 +327,11 @@
#define SSB_SPROM5_GPIOB_P3_SHIFT 8
/* SPROM Revision 8 */
-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */
-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */
+#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
+#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
@@ -354,14 +357,63 @@
#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */
-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
+#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
+#define SSB_SPROM8_RSSISMF2G 0x000F
+#define SSB_SPROM8_RSSISMC2G 0x00F0
+#define SSB_SPROM8_RSSISMC2G_SHIFT 4
+#define SSB_SPROM8_RSSISAV2G 0x0700
+#define SSB_SPROM8_RSSISAV2G_SHIFT 8
+#define SSB_SPROM8_BXA2G 0x1800
+#define SSB_SPROM8_BXA2G_SHIFT 11
+#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
+#define SSB_SPROM8_RSSISMF5G 0x000F
+#define SSB_SPROM8_RSSISMC5G 0x00F0
+#define SSB_SPROM8_RSSISMC5G_SHIFT 4
+#define SSB_SPROM8_RSSISAV5G 0x0700
+#define SSB_SPROM8_RSSISAV5G_SHIFT 8
+#define SSB_SPROM8_BXA5G 0x1800
+#define SSB_SPROM8_BXA5G_SHIFT 11
+#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
+#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
+#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
+#define SSB_SPROM8_TRI5G_SHIFT 8
+#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
+#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
+#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
+#define SSB_SPROM8_TRI5GH_SHIFT 8
+#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
+#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
+#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
+#define SSB_SPROM8_RXPO5G_SHIFT 8
+#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
#define SSB_SPROM8_ITSSI_BG_SHIFT 8
-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */
-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
+#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1 0x10C4
+#define SSB_SPROM8_PA0B2 0x10C6
+#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
+#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
#define SSB_SPROM8_ITSSI_A_SHIFT 8
+#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
+#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
+#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
+#define SSB_SPROM8_MAXP_AL_SHIFT 8
+#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1 0x10CE
+#define SSB_SPROM8_PA1B2 0x10D0
+#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1 0x10D4
+#define SSB_SPROM8_PA1LOB2 0x10D6
+#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1 0x10DA
+#define SSB_SPROM8_PA1HIB2 0x10DC
+#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index 2d8b211..6f52b4d 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -59,6 +59,15 @@
#define CACHE_NEW_EXPIRY 120 /* keep new things pending confirmation for 120 seconds */
+struct cache_detail_procfs {
+ struct proc_dir_entry *proc_ent;
+ struct proc_dir_entry *flush_ent, *channel_ent, *content_ent;
+};
+
+struct cache_detail_pipefs {
+ struct dentry *dir;
+};
+
struct cache_detail {
struct module * owner;
int hash_size;
@@ -70,15 +79,17 @@
char *name;
void (*cache_put)(struct kref *);
- void (*cache_request)(struct cache_detail *cd,
- struct cache_head *h,
- char **bpp, int *blen);
+ int (*cache_upcall)(struct cache_detail *,
+ struct cache_head *);
+
int (*cache_parse)(struct cache_detail *,
char *buf, int len);
int (*cache_show)(struct seq_file *m,
struct cache_detail *cd,
struct cache_head *h);
+ void (*warn_no_listener)(struct cache_detail *cd,
+ int has_died);
struct cache_head * (*alloc)(void);
int (*match)(struct cache_head *orig, struct cache_head *new);
@@ -96,13 +107,15 @@
/* fields for communication over channel */
struct list_head queue;
- struct proc_dir_entry *proc_ent;
- struct proc_dir_entry *flush_ent, *channel_ent, *content_ent;
atomic_t readers; /* how many time is /chennel open */
time_t last_close; /* if no readers, when did last close */
time_t last_warn; /* when we last warned about no readers */
- void (*warn_no_listener)(struct cache_detail *cd);
+
+ union {
+ struct cache_detail_procfs procfs;
+ struct cache_detail_pipefs pipefs;
+ } u;
};
@@ -127,6 +140,10 @@
};
+extern const struct file_operations cache_file_operations_pipefs;
+extern const struct file_operations content_file_operations_pipefs;
+extern const struct file_operations cache_flush_operations_pipefs;
+
extern struct cache_head *
sunrpc_cache_lookup(struct cache_detail *detail,
struct cache_head *key, int hash);
@@ -134,6 +151,13 @@
sunrpc_cache_update(struct cache_detail *detail,
struct cache_head *new, struct cache_head *old, int hash);
+extern int
+sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h,
+ void (*cache_request)(struct cache_detail *,
+ struct cache_head *,
+ char **,
+ int *));
+
extern void cache_clean_deferred(void *owner);
@@ -171,6 +195,10 @@
extern int cache_register(struct cache_detail *cd);
extern void cache_unregister(struct cache_detail *cd);
+extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *,
+ mode_t, struct cache_detail *);
+extern void sunrpc_cache_unregister_pipefs(struct cache_detail *);
+
extern void qword_add(char **bpp, int *lp, char *str);
extern void qword_addhex(char **bpp, int *lp, char *buf, int blen);
extern int qword_get(char **bpp, char *dest, int bufsize);
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 37881f1a..ab3f6e9 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -9,6 +9,10 @@
#ifndef _LINUX_SUNRPC_CLNT_H
#define _LINUX_SUNRPC_CLNT_H
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
#include <linux/sunrpc/msg_prot.h>
#include <linux/sunrpc/sched.h>
#include <linux/sunrpc/xprt.h>
@@ -17,6 +21,7 @@
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/timer.h>
#include <asm/signal.h>
+#include <linux/path.h>
struct rpc_inode;
@@ -50,9 +55,7 @@
int cl_nodelen; /* nodename length */
char cl_nodename[UNX_MAXNODENAME];
- char cl_pathname[30];/* Path in rpc_pipe_fs */
- struct vfsmount * cl_vfsmnt;
- struct dentry * cl_dentry; /* inode */
+ struct path cl_path;
struct rpc_clnt * cl_parent; /* Points to parent of clones */
struct rpc_rtt cl_rtt_default;
struct rpc_timeout cl_timeout_default;
@@ -151,5 +154,39 @@
size_t rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t);
const char *rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t);
+size_t rpc_ntop(const struct sockaddr *, char *, const size_t);
+size_t rpc_pton(const char *, const size_t,
+ struct sockaddr *, const size_t);
+char * rpc_sockaddr2uaddr(const struct sockaddr *);
+size_t rpc_uaddr2sockaddr(const char *, const size_t,
+ struct sockaddr *, const size_t);
+
+static inline unsigned short rpc_get_port(const struct sockaddr *sap)
+{
+ switch (sap->sa_family) {
+ case AF_INET:
+ return ntohs(((struct sockaddr_in *)sap)->sin_port);
+ case AF_INET6:
+ return ntohs(((struct sockaddr_in6 *)sap)->sin6_port);
+ }
+ return 0;
+}
+
+static inline void rpc_set_port(struct sockaddr *sap,
+ const unsigned short port)
+{
+ switch (sap->sa_family) {
+ case AF_INET:
+ ((struct sockaddr_in *)sap)->sin_port = htons(port);
+ break;
+ case AF_INET6:
+ ((struct sockaddr_in6 *)sap)->sin6_port = htons(port);
+ break;
+ }
+}
+
+#define IPV6_SCOPE_DELIMITER '%'
+#define IPV6_SCOPE_ID_LEN sizeof("%nnnnnnnnnn")
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_CLNT_H */
diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h
index 70df4f1..77e6248 100644
--- a/include/linux/sunrpc/msg_prot.h
+++ b/include/linux/sunrpc/msg_prot.h
@@ -189,7 +189,22 @@
* Additionally, the two alternative forms specified in Section 2.2 of
* [RFC2373] are also acceptable.
*/
-#define RPCBIND_MAXUADDRLEN (56u)
+
+#include <linux/inet.h>
+
+/* Maximum size of the port number part of a universal address */
+#define RPCBIND_MAXUADDRPLEN sizeof(".255.255")
+
+/* Maximum size of an IPv4 universal address */
+#define RPCBIND_MAXUADDR4LEN \
+ (INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
+
+/* Maximum size of an IPv6 universal address */
+#define RPCBIND_MAXUADDR6LEN \
+ (INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
+
+/* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */
+#define RPCBIND_MAXUADDRLEN RPCBIND_MAXUADDR6LEN
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h
index cea764c..cf14db9 100644
--- a/include/linux/sunrpc/rpc_pipe_fs.h
+++ b/include/linux/sunrpc/rpc_pipe_fs.h
@@ -3,6 +3,8 @@
#ifdef __KERNEL__
+#include <linux/workqueue.h>
+
struct rpc_pipe_msg {
struct list_head list;
void *data;
@@ -32,8 +34,8 @@
wait_queue_head_t waitq;
#define RPC_PIPE_WAIT_FOR_OPEN 1
int flags;
- struct rpc_pipe_ops *ops;
struct delayed_work queue_timeout;
+ const struct rpc_pipe_ops *ops;
};
static inline struct rpc_inode *
@@ -44,9 +46,19 @@
extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *);
-extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *);
-extern int rpc_rmdir(struct dentry *);
-extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, struct rpc_pipe_ops *, int flags);
+struct rpc_clnt;
+extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *);
+extern int rpc_remove_client_dir(struct dentry *);
+
+struct cache_detail;
+extern struct dentry *rpc_create_cache_dir(struct dentry *,
+ struct qstr *,
+ mode_t umode,
+ struct cache_detail *);
+extern void rpc_remove_cache_dir(struct dentry *);
+
+extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *,
+ const struct rpc_pipe_ops *, int flags);
extern int rpc_unlink(struct dentry *);
extern struct vfsmount *rpc_get_mount(void);
extern void rpc_put_mount(void);
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index b99c625..7da466b 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -117,17 +117,15 @@
static inline __be32 *
xdr_encode_hyper(__be32 *p, __u64 val)
{
- *p++ = htonl(val >> 32);
- *p++ = htonl(val & 0xFFFFFFFF);
- return p;
+ *(__be64 *)p = cpu_to_be64(val);
+ return p + 2;
}
static inline __be32 *
xdr_decode_hyper(__be32 *p, __u64 *valp)
{
- *valp = ((__u64) ntohl(*p++)) << 32;
- *valp |= ntohl(*p++);
- return p;
+ *valp = be64_to_cpup((__be64 *)p);
+ return p + 2;
}
/*
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 1175d58..c090df4 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -38,10 +38,8 @@
RPC_DISPLAY_ADDR = 0,
RPC_DISPLAY_PORT,
RPC_DISPLAY_PROTO,
- RPC_DISPLAY_ALL,
RPC_DISPLAY_HEX_ADDR,
RPC_DISPLAY_HEX_PORT,
- RPC_DISPLAY_UNIVERSAL_ADDR,
RPC_DISPLAY_NETID,
RPC_DISPLAY_MAX,
};
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index cb1a663..73b1f1c 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -14,7 +14,6 @@
*/
#define IO_TLB_SEGSIZE 128
-
/*
* log of the size of each IO TLB slab. The number of slabs is command line
* controllable.
@@ -24,16 +23,6 @@
extern void
swiotlb_init(void);
-extern void *swiotlb_alloc_boot(size_t bytes, unsigned long nslabs);
-extern void *swiotlb_alloc(unsigned order, unsigned long nslabs);
-
-extern dma_addr_t swiotlb_phys_to_bus(struct device *hwdev,
- phys_addr_t address);
-extern phys_addr_t swiotlb_bus_to_phys(struct device *hwdev,
- dma_addr_t address);
-
-extern int swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size);
-
extern void
*swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 80de700..a8e3782 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -64,6 +64,7 @@
#include <linux/sem.h>
#include <asm/siginfo.h>
#include <asm/signal.h>
+#include <linux/unistd.h>
#include <linux/quota.h>
#include <linux/key.h>
#include <trace/syscall.h>
@@ -97,6 +98,53 @@
#define __SC_TEST5(t5, a5, ...) __SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
#define __SC_TEST6(t6, a6, ...) __SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
+#ifdef CONFIG_EVENT_PROFILE
+#define TRACE_SYS_ENTER_PROFILE(sname) \
+static int prof_sysenter_enable_##sname(struct ftrace_event_call *event_call) \
+{ \
+ int ret = 0; \
+ if (!atomic_inc_return(&event_enter_##sname.profile_count)) \
+ ret = reg_prof_syscall_enter("sys"#sname); \
+ return ret; \
+} \
+ \
+static void prof_sysenter_disable_##sname(struct ftrace_event_call *event_call)\
+{ \
+ if (atomic_add_negative(-1, &event_enter_##sname.profile_count)) \
+ unreg_prof_syscall_enter("sys"#sname); \
+}
+
+#define TRACE_SYS_EXIT_PROFILE(sname) \
+static int prof_sysexit_enable_##sname(struct ftrace_event_call *event_call) \
+{ \
+ int ret = 0; \
+ if (!atomic_inc_return(&event_exit_##sname.profile_count)) \
+ ret = reg_prof_syscall_exit("sys"#sname); \
+ return ret; \
+} \
+ \
+static void prof_sysexit_disable_##sname(struct ftrace_event_call *event_call) \
+{ \
+ if (atomic_add_negative(-1, &event_exit_##sname.profile_count)) \
+ unreg_prof_syscall_exit("sys"#sname); \
+}
+
+#define TRACE_SYS_ENTER_PROFILE_INIT(sname) \
+ .profile_count = ATOMIC_INIT(-1), \
+ .profile_enable = prof_sysenter_enable_##sname, \
+ .profile_disable = prof_sysenter_disable_##sname,
+
+#define TRACE_SYS_EXIT_PROFILE_INIT(sname) \
+ .profile_count = ATOMIC_INIT(-1), \
+ .profile_enable = prof_sysexit_enable_##sname, \
+ .profile_disable = prof_sysexit_disable_##sname,
+#else
+#define TRACE_SYS_ENTER_PROFILE(sname)
+#define TRACE_SYS_ENTER_PROFILE_INIT(sname)
+#define TRACE_SYS_EXIT_PROFILE(sname)
+#define TRACE_SYS_EXIT_PROFILE_INIT(sname)
+#endif
+
#ifdef CONFIG_FTRACE_SYSCALLS
#define __SC_STR_ADECL1(t, a) #a
#define __SC_STR_ADECL2(t, a, ...) #a, __SC_STR_ADECL1(__VA_ARGS__)
@@ -112,7 +160,81 @@
#define __SC_STR_TDECL5(t, a, ...) #t, __SC_STR_TDECL4(__VA_ARGS__)
#define __SC_STR_TDECL6(t, a, ...) #t, __SC_STR_TDECL5(__VA_ARGS__)
+#define SYSCALL_TRACE_ENTER_EVENT(sname) \
+ static struct ftrace_event_call event_enter_##sname; \
+ struct trace_event enter_syscall_print_##sname = { \
+ .trace = print_syscall_enter, \
+ }; \
+ static int init_enter_##sname(void) \
+ { \
+ int num, id; \
+ num = syscall_name_to_nr("sys"#sname); \
+ if (num < 0) \
+ return -ENOSYS; \
+ id = register_ftrace_event(&enter_syscall_print_##sname);\
+ if (!id) \
+ return -ENODEV; \
+ event_enter_##sname.id = id; \
+ set_syscall_enter_id(num, id); \
+ INIT_LIST_HEAD(&event_enter_##sname.fields); \
+ return 0; \
+ } \
+ TRACE_SYS_ENTER_PROFILE(sname); \
+ static struct ftrace_event_call __used \
+ __attribute__((__aligned__(4))) \
+ __attribute__((section("_ftrace_events"))) \
+ event_enter_##sname = { \
+ .name = "sys_enter"#sname, \
+ .system = "syscalls", \
+ .event = &event_syscall_enter, \
+ .raw_init = init_enter_##sname, \
+ .show_format = syscall_enter_format, \
+ .define_fields = syscall_enter_define_fields, \
+ .regfunc = reg_event_syscall_enter, \
+ .unregfunc = unreg_event_syscall_enter, \
+ .data = "sys"#sname, \
+ TRACE_SYS_ENTER_PROFILE_INIT(sname) \
+ }
+
+#define SYSCALL_TRACE_EXIT_EVENT(sname) \
+ static struct ftrace_event_call event_exit_##sname; \
+ struct trace_event exit_syscall_print_##sname = { \
+ .trace = print_syscall_exit, \
+ }; \
+ static int init_exit_##sname(void) \
+ { \
+ int num, id; \
+ num = syscall_name_to_nr("sys"#sname); \
+ if (num < 0) \
+ return -ENOSYS; \
+ id = register_ftrace_event(&exit_syscall_print_##sname);\
+ if (!id) \
+ return -ENODEV; \
+ event_exit_##sname.id = id; \
+ set_syscall_exit_id(num, id); \
+ INIT_LIST_HEAD(&event_exit_##sname.fields); \
+ return 0; \
+ } \
+ TRACE_SYS_EXIT_PROFILE(sname); \
+ static struct ftrace_event_call __used \
+ __attribute__((__aligned__(4))) \
+ __attribute__((section("_ftrace_events"))) \
+ event_exit_##sname = { \
+ .name = "sys_exit"#sname, \
+ .system = "syscalls", \
+ .event = &event_syscall_exit, \
+ .raw_init = init_exit_##sname, \
+ .show_format = syscall_exit_format, \
+ .define_fields = syscall_exit_define_fields, \
+ .regfunc = reg_event_syscall_exit, \
+ .unregfunc = unreg_event_syscall_exit, \
+ .data = "sys"#sname, \
+ TRACE_SYS_EXIT_PROFILE_INIT(sname) \
+ }
+
#define SYSCALL_METADATA(sname, nb) \
+ SYSCALL_TRACE_ENTER_EVENT(sname); \
+ SYSCALL_TRACE_EXIT_EVENT(sname); \
static const struct syscall_metadata __used \
__attribute__((__aligned__(4))) \
__attribute__((section("__syscalls_metadata"))) \
@@ -121,18 +243,23 @@
.nb_args = nb, \
.types = types_##sname, \
.args = args_##sname, \
- }
+ .enter_event = &event_enter_##sname, \
+ .exit_event = &event_exit_##sname, \
+ };
#define SYSCALL_DEFINE0(sname) \
+ SYSCALL_TRACE_ENTER_EVENT(_##sname); \
+ SYSCALL_TRACE_EXIT_EVENT(_##sname); \
static const struct syscall_metadata __used \
__attribute__((__aligned__(4))) \
__attribute__((section("__syscalls_metadata"))) \
__syscall_meta_##sname = { \
.name = "sys_"#sname, \
.nb_args = 0, \
+ .enter_event = &event_enter__##sname, \
+ .exit_event = &event_exit__##sname, \
}; \
asmlinkage long sys_##sname(void)
-
#else
#define SYSCALL_DEFINE0(name) asmlinkage long sys_##name(void)
#endif
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 8afac76..61723a7 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -233,7 +233,7 @@
struct inet_request_sock req;
#ifdef CONFIG_TCP_MD5SIG
/* Only used by TCP MD5 Signature so far. */
- struct tcp_request_sock_ops *af_specific;
+ const struct tcp_request_sock_ops *af_specific;
#endif
u32 rcv_isn;
u32 snt_isn;
@@ -401,9 +401,9 @@
#ifdef CONFIG_TCP_MD5SIG
/* TCP AF-Specific parts; only used by MD5 Signature support so far */
- struct tcp_sock_af_ops *af_specific;
+ const struct tcp_sock_af_ops *af_specific;
-/* TCP MD5 Signagure Option information */
+/* TCP MD5 Signature Option information */
struct tcp_md5sig_info *md5sig_info;
#endif
};
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index bea4694..3d92396 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -209,5 +209,7 @@
#define TIPC_SRC_DROPPABLE 128 /* Default: 0 (resend congested msg) */
#define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */
#define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */
+#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */
+#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */
#endif
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 7402c1a..85e8cf7 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -85,20 +85,29 @@
#define ARCH_HAS_SCHED_WAKE_IDLE
/* Common values for SMT siblings */
#ifndef SD_SIBLING_INIT
-#define SD_SIBLING_INIT (struct sched_domain) { \
- .min_interval = 1, \
- .max_interval = 2, \
- .busy_factor = 64, \
- .imbalance_pct = 110, \
- .flags = SD_LOAD_BALANCE \
- | SD_BALANCE_NEWIDLE \
- | SD_BALANCE_FORK \
- | SD_BALANCE_EXEC \
- | SD_WAKE_AFFINE \
- | SD_WAKE_BALANCE \
- | SD_SHARE_CPUPOWER, \
- .last_balance = jiffies, \
- .balance_interval = 1, \
+#define SD_SIBLING_INIT (struct sched_domain) { \
+ .min_interval = 1, \
+ .max_interval = 2, \
+ .busy_factor = 64, \
+ .imbalance_pct = 110, \
+ \
+ .flags = 1*SD_LOAD_BALANCE \
+ | 1*SD_BALANCE_NEWIDLE \
+ | 1*SD_BALANCE_EXEC \
+ | 1*SD_BALANCE_FORK \
+ | 0*SD_WAKE_IDLE \
+ | 1*SD_WAKE_AFFINE \
+ | 1*SD_WAKE_BALANCE \
+ | 1*SD_SHARE_CPUPOWER \
+ | 0*SD_POWERSAVINGS_BALANCE \
+ | 0*SD_SHARE_PKG_RESOURCES \
+ | 0*SD_SERIALIZE \
+ | 0*SD_WAKE_IDLE_FAR \
+ | 0*SD_PREFER_SIBLING \
+ , \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
+ .smt_gain = 1178, /* 15% */ \
}
#endif
#endif /* CONFIG_SCHED_SMT */
@@ -106,69 +115,94 @@
#ifdef CONFIG_SCHED_MC
/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
#ifndef SD_MC_INIT
-#define SD_MC_INIT (struct sched_domain) { \
- .min_interval = 1, \
- .max_interval = 4, \
- .busy_factor = 64, \
- .imbalance_pct = 125, \
- .cache_nice_tries = 1, \
- .busy_idx = 2, \
- .wake_idx = 1, \
- .forkexec_idx = 1, \
- .flags = SD_LOAD_BALANCE \
- | SD_BALANCE_FORK \
- | SD_BALANCE_EXEC \
- | SD_WAKE_AFFINE \
- | SD_WAKE_BALANCE \
- | SD_SHARE_PKG_RESOURCES\
- | sd_balance_for_mc_power()\
- | sd_power_saving_flags(),\
- .last_balance = jiffies, \
- .balance_interval = 1, \
+#define SD_MC_INIT (struct sched_domain) { \
+ .min_interval = 1, \
+ .max_interval = 4, \
+ .busy_factor = 64, \
+ .imbalance_pct = 125, \
+ .cache_nice_tries = 1, \
+ .busy_idx = 2, \
+ .wake_idx = 1, \
+ .forkexec_idx = 1, \
+ \
+ .flags = 1*SD_LOAD_BALANCE \
+ | 1*SD_BALANCE_NEWIDLE \
+ | 1*SD_BALANCE_EXEC \
+ | 1*SD_BALANCE_FORK \
+ | 1*SD_WAKE_IDLE \
+ | 1*SD_WAKE_AFFINE \
+ | 1*SD_WAKE_BALANCE \
+ | 0*SD_SHARE_CPUPOWER \
+ | 1*SD_SHARE_PKG_RESOURCES \
+ | 0*SD_SERIALIZE \
+ | 0*SD_WAKE_IDLE_FAR \
+ | sd_balance_for_mc_power() \
+ | sd_power_saving_flags() \
+ , \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
}
#endif
#endif /* CONFIG_SCHED_MC */
/* Common values for CPUs */
#ifndef SD_CPU_INIT
-#define SD_CPU_INIT (struct sched_domain) { \
- .min_interval = 1, \
- .max_interval = 4, \
- .busy_factor = 64, \
- .imbalance_pct = 125, \
- .cache_nice_tries = 1, \
- .busy_idx = 2, \
- .idle_idx = 1, \
- .newidle_idx = 2, \
- .wake_idx = 1, \
- .forkexec_idx = 1, \
- .flags = SD_LOAD_BALANCE \
- | SD_BALANCE_EXEC \
- | SD_BALANCE_FORK \
- | SD_WAKE_AFFINE \
- | SD_WAKE_BALANCE \
- | sd_balance_for_package_power()\
- | sd_power_saving_flags(),\
- .last_balance = jiffies, \
- .balance_interval = 1, \
+#define SD_CPU_INIT (struct sched_domain) { \
+ .min_interval = 1, \
+ .max_interval = 4, \
+ .busy_factor = 64, \
+ .imbalance_pct = 125, \
+ .cache_nice_tries = 1, \
+ .busy_idx = 2, \
+ .idle_idx = 1, \
+ .newidle_idx = 2, \
+ .wake_idx = 1, \
+ .forkexec_idx = 1, \
+ \
+ .flags = 1*SD_LOAD_BALANCE \
+ | 1*SD_BALANCE_NEWIDLE \
+ | 1*SD_BALANCE_EXEC \
+ | 1*SD_BALANCE_FORK \
+ | 1*SD_WAKE_IDLE \
+ | 0*SD_WAKE_AFFINE \
+ | 1*SD_WAKE_BALANCE \
+ | 0*SD_SHARE_CPUPOWER \
+ | 0*SD_SHARE_PKG_RESOURCES \
+ | 0*SD_SERIALIZE \
+ | 0*SD_WAKE_IDLE_FAR \
+ | sd_balance_for_package_power() \
+ | sd_power_saving_flags() \
+ , \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
}
#endif
/* sched_domains SD_ALLNODES_INIT for NUMA machines */
-#define SD_ALLNODES_INIT (struct sched_domain) { \
- .min_interval = 64, \
- .max_interval = 64*num_online_cpus(), \
- .busy_factor = 128, \
- .imbalance_pct = 133, \
- .cache_nice_tries = 1, \
- .busy_idx = 3, \
- .idle_idx = 3, \
- .flags = SD_LOAD_BALANCE \
- | SD_BALANCE_NEWIDLE \
- | SD_WAKE_AFFINE \
- | SD_SERIALIZE, \
- .last_balance = jiffies, \
- .balance_interval = 64, \
+#define SD_ALLNODES_INIT (struct sched_domain) { \
+ .min_interval = 64, \
+ .max_interval = 64*num_online_cpus(), \
+ .busy_factor = 128, \
+ .imbalance_pct = 133, \
+ .cache_nice_tries = 1, \
+ .busy_idx = 3, \
+ .idle_idx = 3, \
+ .flags = 1*SD_LOAD_BALANCE \
+ | 1*SD_BALANCE_NEWIDLE \
+ | 0*SD_BALANCE_EXEC \
+ | 0*SD_BALANCE_FORK \
+ | 0*SD_WAKE_IDLE \
+ | 1*SD_WAKE_AFFINE \
+ | 0*SD_WAKE_BALANCE \
+ | 0*SD_SHARE_CPUPOWER \
+ | 0*SD_POWERSAVINGS_BALANCE \
+ | 0*SD_SHARE_PKG_RESOURCES \
+ | 1*SD_SERIALIZE \
+ | 1*SD_WAKE_IDLE_FAR \
+ | 0*SD_PREFER_SIBLING \
+ , \
+ .last_balance = jiffies, \
+ .balance_interval = 64, \
}
#ifdef CONFIG_NUMA
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index b9dc4ca..63a3f7a 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -23,6 +23,8 @@
struct tracepoint {
const char *name; /* Tracepoint name */
int state; /* State. */
+ void (*regfunc)(void);
+ void (*unregfunc)(void);
void **funcs;
} __attribute__((aligned(32))); /*
* Aligned on 32 bytes because it is
@@ -78,12 +80,16 @@
return tracepoint_probe_unregister(#name, (void *)probe);\
}
-#define DEFINE_TRACE(name) \
+
+#define DEFINE_TRACE_FN(name, reg, unreg) \
static const char __tpstrtab_##name[] \
__attribute__((section("__tracepoints_strings"))) = #name; \
struct tracepoint __tracepoint_##name \
__attribute__((section("__tracepoints"), aligned(32))) = \
- { __tpstrtab_##name, 0, NULL }
+ { __tpstrtab_##name, 0, reg, unreg, NULL }
+
+#define DEFINE_TRACE(name) \
+ DEFINE_TRACE_FN(name, NULL, NULL);
#define EXPORT_TRACEPOINT_SYMBOL_GPL(name) \
EXPORT_SYMBOL_GPL(__tracepoint_##name)
@@ -108,6 +114,7 @@
return -ENOSYS; \
}
+#define DEFINE_TRACE_FN(name, reg, unreg)
#define DEFINE_TRACE(name)
#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)
#define EXPORT_TRACEPOINT_SYMBOL(name)
@@ -158,6 +165,15 @@
#define PARAMS(args...) args
+#endif /* _LINUX_TRACEPOINT_H */
+
+/*
+ * Note: we keep the TRACE_EVENT outside the include file ifdef protection.
+ * This is due to the way trace events work. If a file includes two
+ * trace event headers under one "CREATE_TRACE_POINTS" the first include
+ * will override the TRACE_EVENT and break the second include.
+ */
+
#ifndef TRACE_EVENT
/*
* For use with the TRACE_EVENT macro:
@@ -259,10 +275,15 @@
* can also by used by generic instrumentation like SystemTap), and
* it is also used to expose a structured trace record in
* /sys/kernel/debug/tracing/events/.
+ *
+ * A set of (un)registration functions can be passed to the variant
+ * TRACE_EVENT_FN to perform any (un)registration work.
*/
#define TRACE_EVENT(name, proto, args, struct, assign, print) \
DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-#endif
+#define TRACE_EVENT_FN(name, proto, args, struct, \
+ assign, print, reg, unreg) \
+ DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-#endif
+#endif /* ifdef TRACE_EVENT (see note above) */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e8c6c91..a916a31 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -23,7 +23,7 @@
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS 19
+#define NR_LDISCS 20
/* line disciplines */
#define N_TTY 0
@@ -47,6 +47,8 @@
#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
#define N_PPS 18 /* Pulse per Second */
+#define N_V253 19 /* Codec control over voice modem */
+
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
@@ -517,10 +519,6 @@
extern int pcxe_open(struct tty_struct *tty, struct file *filp);
-/* printk.c */
-
-extern void console_print(const char *);
-
/* vt.c */
extern int vt_ioctl(struct tty_struct *tty, struct file *file,
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index ed889f4..ae779bb 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -73,6 +73,10 @@
#define UCB_ADC_DATA 0x68
#define UCB_ADC_DAT_VALID (1 << 15)
+
+#define UCB_FCSR 0x6c
+#define UCB_FCSR_AVE (1 << 12)
+
#define UCB_ADC_DAT_MASK 0x3ff
#define UCB_ID 0x7e
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 37836b9..1ef1ebc 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -70,12 +70,13 @@
#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
/* codes for "status" field of completion messages */
-#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000)
-#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001)
-#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015)
-#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb)
-#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b)
-#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c)
+#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000)
+#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001)
+#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015)
+#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb)
+#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b)
+#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c)
+#define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION cpu_to_le32(0x40010012)
/* codes for OID_GEN_PHYSICAL_MEDIUM */
#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000)
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 310e18a..bb69e25 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -53,6 +53,7 @@
struct sk_buff_head rxq;
struct sk_buff_head txq;
struct sk_buff_head done;
+ struct sk_buff_head rxq_pause;
struct urb *interrupt;
struct tasklet_struct bh;
@@ -63,6 +64,7 @@
# define EVENT_RX_MEMORY 2
# define EVENT_STS_SPLIT 3
# define EVENT_LINK_RESET 4
+# define EVENT_RX_PAUSED 5
};
static inline struct usb_driver *driver_of(struct usb_interface *intf)
@@ -86,6 +88,7 @@
#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
+#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
/* init device ... can sleep, or cause probe() failure */
@@ -97,6 +100,9 @@
/* reset device ... can sleep */
int (*reset)(struct usbnet *);
+ /* stop device ... can sleep */
+ int (*stop)(struct usbnet *);
+
/* see if peer is connected ... can sleep */
int (*check_connect)(struct usbnet *);
@@ -118,9 +124,8 @@
* right after minidriver have initialized hardware. */
int (*early_init)(struct usbnet *dev);
- /* called by minidriver when link state changes, state: 0=disconnect,
- * 1=connect */
- void (*link_change)(struct usbnet *dev, int state);
+ /* called by minidriver when receiving indication */
+ void (*indication)(struct usbnet *dev, void *ind, int indlen);
/* for new devices, use the descriptor-reading code instead */
int in; /* rx endpoint */
@@ -177,7 +182,8 @@
extern int usbnet_open (struct net_device *net);
extern int usbnet_stop (struct net_device *net);
-extern int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net);
+extern netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
+ struct net_device *net);
extern void usbnet_tx_timeout (struct net_device *net);
extern int usbnet_change_mtu (struct net_device *net, int new_mtu);
@@ -187,6 +193,10 @@
extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
extern void usbnet_unlink_rx_urbs(struct usbnet *);
+extern void usbnet_pause_rx(struct usbnet *);
+extern void usbnet_resume_rx(struct usbnet *);
+extern void usbnet_purge_paused_rxq(struct usbnet *);
+
extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd);
extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd);
extern u32 usbnet_get_link (struct net_device *net);
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index cb24204..5b4c6c7 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -1132,6 +1132,14 @@
};
#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer)
#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length)
+
+/* Size of the various events for compat */
+#define IW_EV_COMPAT_CHAR_LEN (IW_EV_COMPAT_LCP_LEN + IFNAMSIZ)
+#define IW_EV_COMPAT_UINT_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(__u32))
+#define IW_EV_COMPAT_FREQ_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_COMPAT_PARAM_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_COMPAT_ADDR_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_COMPAT_QUAL_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality))
#define IW_EV_COMPAT_POINT_LEN \
(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
IW_EV_COMPAT_POINT_OFF)
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 13e1adf..6273fa9 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -240,6 +240,21 @@
return ret;
}
+/*
+ * Like above, but uses del_timer() instead of del_timer_sync(). This means,
+ * if it returns 0 the timer function may be running and the queueing is in
+ * progress.
+ */
+static inline int __cancel_delayed_work(struct delayed_work *work)
+{
+ int ret;
+
+ ret = del_timer(&work->timer);
+ if (ret)
+ work_clear_pending(&work->work);
+ return ret;
+}
+
extern int cancel_delayed_work_sync(struct delayed_work *work);
/* Obsolete. use cancel_delayed_work_sync() */
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 3224820..d347632 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -14,17 +14,6 @@
extern struct list_head inode_unused;
/*
- * Yes, writeback.h requires sched.h
- * No, sched.h is not included from here.
- */
-static inline int task_is_pdflush(struct task_struct *task)
-{
- return task->flags & PF_FLUSHER;
-}
-
-#define current_is_pdflush() task_is_pdflush(current)
-
-/*
* fs/fs-writeback.c
*/
enum writeback_sync_modes {
@@ -40,6 +29,8 @@
struct writeback_control {
struct backing_dev_info *bdi; /* If !NULL, only write back this
queue */
+ struct super_block *sb; /* if !NULL, only write inodes from
+ this super_block */
enum writeback_sync_modes sync_mode;
unsigned long *older_than_this; /* If !NULL, only write back inodes
older than this */
@@ -76,9 +67,13 @@
/*
* fs/fs-writeback.c
*/
-void writeback_inodes(struct writeback_control *wbc);
+struct bdi_writeback;
int inode_wait(void *);
-void sync_inodes_sb(struct super_block *, int wait);
+long writeback_inodes_sb(struct super_block *);
+long sync_inodes_sb(struct super_block *);
+void writeback_inodes_wbc(struct writeback_control *wbc);
+long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
+void wakeup_flusher_threads(long nr_pages);
/* writeback.h requires fs.h; it, too, is not included from here. */
static inline void wait_on_inode(struct inode *inode)
@@ -98,7 +93,6 @@
/*
* mm/page-writeback.c
*/
-int wakeup_pdflush(long nr_pages);
void laptop_io_completion(void);
void laptop_sync_completion(void);
void throttle_vm_writeout(gfp_t gfp_mask);
@@ -150,17 +144,12 @@
typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
void *data);
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0);
int generic_writepages(struct address_space *mapping,
struct writeback_control *wbc);
int write_cache_pages(struct address_space *mapping,
struct writeback_control *wbc, writepage_t writepage,
void *data);
int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
-int sync_page_range(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count);
-int sync_page_range_nolock(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count);
void set_page_dirty_balance(struct page *page, int page_mkwrite);
void writeback_set_ratelimit(void);
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index d131e35..5c84af8 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -49,6 +49,7 @@
ssize_t xattr_getsecurity(struct inode *, const char *, void *, size_t);
ssize_t vfs_getxattr(struct dentry *, const char *, void *, size_t);
ssize_t vfs_listxattr(struct dentry *d, char *list, size_t size);
+int __vfs_setxattr_noperm(struct dentry *, const char *, const void *, size_t, int);
int vfs_setxattr(struct dentry *, const char *, const void *, size_t, int);
int vfs_removexattr(struct dentry *, const char *);
diff --git a/include/net/af_ieee802154.h b/include/net/af_ieee802154.h
new file mode 100644
index 0000000..75e64c7
--- /dev/null
+++ b/include/net/af_ieee802154.h
@@ -0,0 +1,62 @@
+/*
+ * IEEE 802.15.4 inteface for userspace
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef _AF_IEEE802154_H
+#define _AF_IEEE802154_H
+
+#include <linux/socket.h> /* for sa_family_t */
+
+enum {
+ IEEE802154_ADDR_NONE = 0x0,
+ /* RESERVED = 0x01, */
+ IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */
+ IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */
+};
+
+/* address length, octets */
+#define IEEE802154_ADDR_LEN 8
+
+struct ieee802154_addr {
+ int addr_type;
+ u16 pan_id;
+ union {
+ u8 hwaddr[IEEE802154_ADDR_LEN];
+ u16 short_addr;
+ };
+};
+
+#define IEEE802154_PANID_BROADCAST 0xffff
+#define IEEE802154_ADDR_BROADCAST 0xffff
+#define IEEE802154_ADDR_UNDEF 0xfffe
+
+struct sockaddr_ieee802154 {
+ sa_family_t family; /* AF_IEEE802154 */
+ struct ieee802154_addr addr;
+};
+
+/* get/setsockopt */
+#define SOL_IEEE802154 0
+
+#define WPAN_WANTACK 0
+
+#endif
diff --git a/include/net/arp.h b/include/net/arp.h
index c236270..716f43c 100644
--- a/include/net/arp.h
+++ b/include/net/arp.h
@@ -26,6 +26,6 @@
const unsigned char *target_hw);
extern void arp_xmit(struct sk_buff *skb);
-extern struct neigh_ops arp_broken_ops;
+extern const struct neigh_ops arp_broken_ops;
#endif /* _ARP_H */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 968166a..718394e 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -138,8 +138,11 @@
struct bt_skb_cb {
__u8 pkt_type;
__u8 incoming;
+ __u8 tx_seq;
+ __u8 retries;
+ __u8 sar;
};
-#define bt_cb(skb) ((struct bt_skb_cb *)(skb->cb))
+#define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb))
static inline struct sk_buff *bt_skb_alloc(unsigned int len, gfp_t how)
{
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index c4ca422..7b640ae 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -117,7 +117,7 @@
struct sk_buff *sent_cmd;
struct sk_buff *reassembly[3];
- struct semaphore req_lock;
+ struct mutex req_lock;
wait_queue_head_t req_wait_q;
__u32 req_status;
__u32 req_result;
@@ -187,6 +187,7 @@
struct work_struct work_del;
struct device dev;
+ atomic_t devref;
struct hci_dev *hdev;
void *l2cap_data;
@@ -339,6 +340,9 @@
void hci_conn_enter_active_mode(struct hci_conn *conn);
void hci_conn_enter_sniff_mode(struct hci_conn *conn);
+void hci_conn_hold_device(struct hci_conn *conn);
+void hci_conn_put_device(struct hci_conn *conn);
+
static inline void hci_conn_hold(struct hci_conn *conn)
{
atomic_inc(&conn->refcnt);
@@ -700,8 +704,8 @@
#define HCI_REQ_PEND 1
#define HCI_REQ_CANCELED 2
-#define hci_req_lock(d) down(&d->req_lock)
-#define hci_req_unlock(d) up(&d->req_lock)
+#define hci_req_lock(d) mutex_lock(&d->req_lock)
+#define hci_req_unlock(d) mutex_unlock(&d->req_lock)
void hci_req_complete(struct hci_dev *hdev, int result);
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index e919fca..9516f4b 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -27,12 +27,14 @@
/* L2CAP defaults */
#define L2CAP_DEFAULT_MTU 672
+#define L2CAP_DEFAULT_MIN_MTU 48
#define L2CAP_DEFAULT_FLUSH_TO 0xffff
-#define L2CAP_DEFAULT_RX_WINDOW 1
-#define L2CAP_DEFAULT_MAX_RECEIVE 1
-#define L2CAP_DEFAULT_RETRANS_TO 300 /* 300 milliseconds */
-#define L2CAP_DEFAULT_MONITOR_TO 1000 /* 1 second */
-#define L2CAP_DEFAULT_MAX_RX_APDU 0xfff7
+#define L2CAP_DEFAULT_TX_WINDOW 63
+#define L2CAP_DEFAULT_NUM_TO_ACK (L2CAP_DEFAULT_TX_WINDOW/5)
+#define L2CAP_DEFAULT_MAX_TX 3
+#define L2CAP_DEFAULT_RETRANS_TO 1000 /* 1 second */
+#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
+#define L2CAP_DEFAULT_MAX_PDU_SIZE 672
#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
@@ -52,6 +54,7 @@
__u16 imtu;
__u16 flush_to;
__u8 mode;
+ __u8 fcs;
};
#define L2CAP_CONNINFO 0x02
@@ -93,6 +96,32 @@
#define L2CAP_FCS_NONE 0x00
#define L2CAP_FCS_CRC16 0x01
+/* L2CAP Control Field bit masks */
+#define L2CAP_CTRL_SAR 0xC000
+#define L2CAP_CTRL_REQSEQ 0x3F00
+#define L2CAP_CTRL_TXSEQ 0x007E
+#define L2CAP_CTRL_RETRANS 0x0080
+#define L2CAP_CTRL_FINAL 0x0080
+#define L2CAP_CTRL_POLL 0x0010
+#define L2CAP_CTRL_SUPERVISE 0x000C
+#define L2CAP_CTRL_FRAME_TYPE 0x0001 /* I- or S-Frame */
+
+#define L2CAP_CTRL_TXSEQ_SHIFT 1
+#define L2CAP_CTRL_REQSEQ_SHIFT 8
+#define L2CAP_CTRL_SAR_SHIFT 14
+
+/* L2CAP Supervisory Function */
+#define L2CAP_SUPER_RCV_READY 0x0000
+#define L2CAP_SUPER_REJECT 0x0004
+#define L2CAP_SUPER_RCV_NOT_READY 0x0008
+#define L2CAP_SUPER_SELECT_REJECT 0x000C
+
+/* L2CAP Segmentation and Reassembly */
+#define L2CAP_SDU_UNSEGMENTED 0x0000
+#define L2CAP_SDU_START 0x4000
+#define L2CAP_SDU_END 0x8000
+#define L2CAP_SDU_CONTINUE 0xC000
+
/* L2CAP structures */
struct l2cap_hdr {
__le16 len;
@@ -190,7 +219,7 @@
#define L2CAP_MODE_RETRANS 0x01
#define L2CAP_MODE_FLOWCTL 0x02
#define L2CAP_MODE_ERTM 0x03
-#define L2CAP_MODE_STREAM 0x04
+#define L2CAP_MODE_STREAMING 0x04
struct l2cap_disconn_req {
__le16 dcid;
@@ -261,6 +290,14 @@
/* ----- L2CAP channel and socket info ----- */
#define l2cap_pi(sk) ((struct l2cap_pinfo *) sk)
+#define TX_QUEUE(sk) (&l2cap_pi(sk)->tx_queue)
+#define SREJ_QUEUE(sk) (&l2cap_pi(sk)->srej_queue)
+#define SREJ_LIST(sk) (&l2cap_pi(sk)->srej_l.list)
+
+struct srej_list {
+ __u8 tx_seq;
+ struct list_head list;
+};
struct l2cap_pinfo {
struct bt_sock bt;
@@ -271,30 +308,97 @@
__u16 imtu;
__u16 omtu;
__u16 flush_to;
- __u8 sec_level;
+ __u8 mode;
+ __u8 num_conf_req;
+ __u8 num_conf_rsp;
+
+ __u8 fcs;
+ __u8 sec_level;
__u8 role_switch;
- __u8 force_reliable;
+ __u8 force_reliable;
__u8 conf_req[64];
__u8 conf_len;
__u8 conf_state;
- __u8 conf_retry;
+ __u8 conn_state;
+
+ __u8 next_tx_seq;
+ __u8 expected_ack_seq;
+ __u8 req_seq;
+ __u8 expected_tx_seq;
+ __u8 buffer_seq;
+ __u8 buffer_seq_srej;
+ __u8 srej_save_reqseq;
+ __u8 unacked_frames;
+ __u8 retry_count;
+ __u8 num_to_ack;
+ __u16 sdu_len;
+ __u16 partial_sdu_len;
+ struct sk_buff *sdu;
__u8 ident;
+ __u8 remote_tx_win;
+ __u8 remote_max_tx;
+ __u16 retrans_timeout;
+ __u16 monitor_timeout;
+ __u16 max_pdu_size;
+
__le16 sport;
+ struct timer_list retrans_timer;
+ struct timer_list monitor_timer;
+ struct sk_buff_head tx_queue;
+ struct sk_buff_head srej_queue;
+ struct srej_list srej_l;
struct l2cap_conn *conn;
struct sock *next_c;
struct sock *prev_c;
};
-#define L2CAP_CONF_REQ_SENT 0x01
-#define L2CAP_CONF_INPUT_DONE 0x02
-#define L2CAP_CONF_OUTPUT_DONE 0x04
-#define L2CAP_CONF_CONNECT_PEND 0x80
+#define L2CAP_CONF_REQ_SENT 0x01
+#define L2CAP_CONF_INPUT_DONE 0x02
+#define L2CAP_CONF_OUTPUT_DONE 0x04
+#define L2CAP_CONF_MTU_DONE 0x08
+#define L2CAP_CONF_MODE_DONE 0x10
+#define L2CAP_CONF_CONNECT_PEND 0x20
+#define L2CAP_CONF_NO_FCS_RECV 0x40
+#define L2CAP_CONF_STATE2_DEVICE 0x80
-#define L2CAP_CONF_MAX_RETRIES 2
+#define L2CAP_CONF_MAX_CONF_REQ 2
+#define L2CAP_CONF_MAX_CONF_RSP 2
+
+#define L2CAP_CONN_SAR_SDU 0x01
+#define L2CAP_CONN_SREJ_SENT 0x02
+#define L2CAP_CONN_WAIT_F 0x04
+#define L2CAP_CONN_SREJ_ACT 0x08
+#define L2CAP_CONN_SEND_PBIT 0x10
+#define L2CAP_CONN_REMOTE_BUSY 0x20
+#define L2CAP_CONN_LOCAL_BUSY 0x40
+
+#define __mod_retrans_timer() mod_timer(&l2cap_pi(sk)->retrans_timer, \
+ jiffies + msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
+#define __mod_monitor_timer() mod_timer(&l2cap_pi(sk)->monitor_timer, \
+ jiffies + msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
+
+static inline int l2cap_tx_window_full(struct sock *sk)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ int sub;
+
+ sub = (pi->next_tx_seq - pi->expected_ack_seq) % 64;
+
+ if (sub < 0)
+ sub += 64;
+
+ return (sub == pi->remote_tx_win);
+}
+
+#define __get_txseq(ctrl) ((ctrl) & L2CAP_CTRL_TXSEQ) >> 1
+#define __get_reqseq(ctrl) ((ctrl) & L2CAP_CTRL_REQSEQ) >> 8
+#define __is_iframe(ctrl) !((ctrl) & L2CAP_CTRL_FRAME_TYPE)
+#define __is_sframe(ctrl) (ctrl) & L2CAP_CTRL_FRAME_TYPE
+#define __is_sar_start(ctrl) ((ctrl) & L2CAP_CTRL_SAR) == L2CAP_SDU_START
void l2cap_load(void);
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index c274993..921d7b3 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -29,6 +29,7 @@
#define RFCOMM_CONN_TIMEOUT (HZ * 30)
#define RFCOMM_DISC_TIMEOUT (HZ * 20)
#define RFCOMM_AUTH_TIMEOUT (HZ * 25)
+#define RFCOMM_IDLE_TIMEOUT (HZ * 2)
#define RFCOMM_DEFAULT_MTU 127
#define RFCOMM_DEFAULT_CREDITS 7
@@ -154,6 +155,7 @@
struct rfcomm_session {
struct list_head list;
struct socket *sock;
+ struct timer_list timer;
unsigned long state;
unsigned long flags;
atomic_t refcnt;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d1892d6..3d874c6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -80,7 +80,6 @@
* with cfg80211.
*
* @center_freq: center frequency in MHz
- * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz
* @hw_value: hardware-specific value for the channel
* @flags: channel flags from &enum ieee80211_channel_flags.
* @orig_flags: channel flags at registration time, used by regulatory
@@ -97,7 +96,6 @@
struct ieee80211_channel {
enum ieee80211_band band;
u16 center_freq;
- u8 max_bandwidth;
u16 hw_value;
u32 flags;
int max_antenna_gain;
@@ -372,6 +370,10 @@
* @txrate: current unicast bitrate to this station
* @rx_packets: packets received from this station
* @tx_packets: packets transmitted to this station
+ * @generation: generation number for nl80211 dumps.
+ * This number should increase every time the list of stations
+ * changes, i.e. when a station is added or removed, so that
+ * userspace can tell whether it got a consistent snapshot.
*/
struct station_info {
u32 filled;
@@ -385,6 +387,8 @@
struct rate_info txrate;
u32 rx_packets;
u32 tx_packets;
+
+ int generation;
};
/**
@@ -444,6 +448,10 @@
* @flags: mesh path flags
* @discovery_timeout: total mesh path discovery timeout, in msecs
* @discovery_retries: mesh path discovery retries
+ * @generation: generation number for nl80211 dumps.
+ * This number should increase every time the list of mesh paths
+ * changes, i.e. when a station is added or removed, so that
+ * userspace can tell whether it got a consistent snapshot.
*/
struct mpath_info {
u32 filled;
@@ -454,6 +462,8 @@
u32 discovery_timeout;
u8 discovery_retries;
u8 flags;
+
+ int generation;
};
/**
@@ -538,23 +548,26 @@
* @ssids: SSIDs to scan for (active scan only)
* @n_ssids: number of SSIDs
* @channels: channels to scan on.
- * @n_channels: number of channels for each band
+ * @n_channels: total number of channels to scan
* @ie: optional information element(s) to add into Probe Request or %NULL
* @ie_len: length of ie in octets
* @wiphy: the wiphy this was for
- * @ifidx: the interface index
+ * @dev: the interface
*/
struct cfg80211_scan_request {
struct cfg80211_ssid *ssids;
int n_ssids;
- struct ieee80211_channel **channels;
u32 n_channels;
const u8 *ie;
size_t ie_len;
/* internal */
struct wiphy *wiphy;
- int ifidx;
+ struct net_device *dev;
+ bool aborted;
+
+ /* keep last */
+ struct ieee80211_channel *channels[0];
};
/**
@@ -584,7 +597,6 @@
* is no guarantee that these are well-formed!)
* @len_information_elements: total length of the information elements
* @signal: signal strength value (type depends on the wiphy's signal_type)
- * @hold: BSS should not expire
* @free_priv: function pointer to free private data
* @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
*/
@@ -605,37 +617,59 @@
};
/**
+ * ieee80211_bss_get_ie - find IE with given ID
+ * @bss: the bss to search
+ * @ie: the IE ID
+ * Returns %NULL if not found.
+ */
+const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
+
+
+/**
+ * struct cfg80211_crypto_settings - Crypto settings
+ * @wpa_versions: indicates which, if any, WPA versions are enabled
+ * (from enum nl80211_wpa_versions)
+ * @cipher_group: group key cipher suite (or 0 if unset)
+ * @n_ciphers_pairwise: number of AP supported unicast ciphers
+ * @ciphers_pairwise: unicast key cipher suites
+ * @n_akm_suites: number of AKM suites
+ * @akm_suites: AKM suites
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ * required to assume that the port is unauthorized until authorized by
+ * user space. Otherwise, port is marked authorized by default.
+ */
+struct cfg80211_crypto_settings {
+ u32 wpa_versions;
+ u32 cipher_group;
+ int n_ciphers_pairwise;
+ u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
+ int n_akm_suites;
+ u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+ bool control_port;
+};
+
+/**
* struct cfg80211_auth_request - Authentication request data
*
* This structure provides information needed to complete IEEE 802.11
* authentication.
- * NOTE: This structure will likely change when more code from mac80211 is
- * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too.
- * Before using this in a driver that does not use mac80211, it would be better
- * to check the status of that work and better yet, volunteer to work on it.
*
- * @chan: The channel to use or %NULL if not specified (auto-select based on
- * scan results)
- * @peer_addr: The address of the peer STA (AP BSSID in infrastructure case);
- * this field is required to be present; if the driver wants to help with
- * BSS selection, it should use (yet to be added) MLME event to allow user
- * space SME to be notified of roaming candidate, so that the SME can then
- * use the authentication request with the recommended BSSID and whatever
- * other data may be needed for authentication/association
- * @ssid: SSID or %NULL if not yet available
- * @ssid_len: Length of ssid in octets
+ * @bss: The BSS to authenticate with.
* @auth_type: Authentication type (algorithm)
* @ie: Extra IEs to add to Authentication frame or %NULL
* @ie_len: Length of ie buffer in octets
+ * @key_len: length of WEP key for shared key authentication
+ * @key_idx: index of WEP key for shared key authentication
+ * @key: WEP key for shared key authentication
*/
struct cfg80211_auth_request {
- struct ieee80211_channel *chan;
- u8 *peer_addr;
- const u8 *ssid;
- size_t ssid_len;
- enum nl80211_auth_type auth_type;
+ struct cfg80211_bss *bss;
const u8 *ie;
size_t ie_len;
+ enum nl80211_auth_type auth_type;
+ const u8 *key;
+ u8 key_len, key_idx;
};
/**
@@ -643,35 +677,19 @@
*
* This structure provides information needed to complete IEEE 802.11
* (re)association.
- * NOTE: This structure will likely change when more code from mac80211 is
- * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too.
- * Before using this in a driver that does not use mac80211, it would be better
- * to check the status of that work and better yet, volunteer to work on it.
- *
- * @chan: The channel to use or %NULL if not specified (auto-select based on
- * scan results)
- * @peer_addr: The address of the peer STA (AP BSSID); this field is required
- * to be present and the STA must be in State 2 (authenticated) with the
- * peer STA
- * @ssid: SSID
- * @ssid_len: Length of ssid in octets
+ * @bss: The BSS to associate with.
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
* @ie_len: Length of ie buffer in octets
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
- * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
- * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
- * required to assume that the port is unauthorized until authorized by
- * user space. Otherwise, port is marked authorized by default.
+ * @crypto: crypto settings
+ * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
*/
struct cfg80211_assoc_request {
- struct ieee80211_channel *chan;
- u8 *peer_addr;
- const u8 *ssid;
- size_t ssid_len;
- const u8 *ie;
+ struct cfg80211_bss *bss;
+ const u8 *ie, *prev_bssid;
size_t ie_len;
+ struct cfg80211_crypto_settings crypto;
bool use_mfp;
- bool control_port;
};
/**
@@ -680,16 +698,16 @@
* This structure provides information needed to complete IEEE 802.11
* deauthentication.
*
- * @peer_addr: The address of the peer STA (AP BSSID); this field is required
- * to be present and the STA must be authenticated with the peer STA
+ * @bss: the BSS to deauthenticate from
* @ie: Extra IEs to add to Deauthentication frame or %NULL
* @ie_len: Length of ie buffer in octets
+ * @reason_code: The reason code for the deauthentication
*/
struct cfg80211_deauth_request {
- u8 *peer_addr;
- u16 reason_code;
+ struct cfg80211_bss *bss;
const u8 *ie;
size_t ie_len;
+ u16 reason_code;
};
/**
@@ -698,16 +716,16 @@
* This structure provides information needed to complete IEEE 802.11
* disassocation.
*
- * @peer_addr: The address of the peer STA (AP BSSID); this field is required
- * to be present and the STA must be associated with the peer STA
+ * @bss: the BSS to disassociate from
* @ie: Extra IEs to add to Disassociation frame or %NULL
* @ie_len: Length of ie buffer in octets
+ * @reason_code: The reason code for the disassociation
*/
struct cfg80211_disassoc_request {
- u8 *peer_addr;
- u16 reason_code;
+ struct cfg80211_bss *bss;
const u8 *ie;
size_t ie_len;
+ u16 reason_code;
};
/**
@@ -726,6 +744,8 @@
* @ie: information element(s) to include in the beacon
* @ie_len: length of that
* @beacon_interval: beacon interval to use
+ * @privacy: this is a protected network, keys will be configured
+ * after joining
*/
struct cfg80211_ibss_params {
u8 *ssid;
@@ -735,6 +755,42 @@
u8 ssid_len, ie_len;
u16 beacon_interval;
bool channel_fixed;
+ bool privacy;
+};
+
+/**
+ * struct cfg80211_connect_params - Connection parameters
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * authentication and association.
+ *
+ * @channel: The channel to use or %NULL if not specified (auto-select based
+ * on scan results)
+ * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
+ * results)
+ * @ssid: SSID
+ * @ssid_len: Length of ssid in octets
+ * @auth_type: Authentication type (algorithm)
+ * @assoc_ie: IEs for association request
+ * @assoc_ie_len: Length of assoc_ie in octets
+ * @privacy: indicates whether privacy-enabled APs should be used
+ * @crypto: crypto settings
+ * @key_len: length of WEP key for shared key authentication
+ * @key_idx: index of WEP key for shared key authentication
+ * @key: WEP key for shared key authentication
+ */
+struct cfg80211_connect_params {
+ struct ieee80211_channel *channel;
+ u8 *bssid;
+ u8 *ssid;
+ size_t ssid_len;
+ enum nl80211_auth_type auth_type;
+ u8 *ie;
+ size_t ie_len;
+ bool privacy;
+ struct cfg80211_crypto_settings crypto;
+ const u8 *key;
+ u8 key_len, key_idx;
};
/**
@@ -764,6 +820,26 @@
TX_POWER_FIXED,
};
+/*
+ * cfg80211_bitrate_mask - masks for bitrate control
+ */
+struct cfg80211_bitrate_mask {
+/*
+ * As discussed in Berlin, this struct really
+ * should look like this:
+
+ struct {
+ u32 legacy;
+ u8 mcs[IEEE80211_HT_MCS_MASK_LEN];
+ } control[IEEE80211_NUM_BANDS];
+
+ * Since we can always fix in-kernel users, let's keep
+ * it simpler for now:
+ */
+ u32 fixed; /* fixed bitrate, 0 == not fixed */
+ u32 maxrate; /* in kbps, 0 == no limit */
+};
+
/**
* struct cfg80211_ops - backend description for wireless configuration
*
@@ -781,7 +857,8 @@
* @resume: wiphy device needs to be resumed
*
* @add_virtual_intf: create a new virtual interface with the given name,
- * must set the struct wireless_dev's iftype.
+ * must set the struct wireless_dev's iftype. Beware: You must create
+ * the new netdev in the wiphy's network namespace!
*
* @del_virtual_intf: remove the virtual interface determined by ifindex.
*
@@ -841,6 +918,12 @@
* @deauth: Request to deauthenticate from the specified peer
* @disassoc: Request to disassociate from the specified peer
*
+ * @connect: Connect to the ESS with the specified parameters. When connected,
+ * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
+ * If the connection fails for some reason, call cfg80211_connect_result()
+ * with the status from the AP.
+ * @disconnect: Disconnect from the BSS/ESS.
+ *
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
* cfg80211_ibss_joined(), also call that function when changing BSSID due
* to a merge.
@@ -857,6 +940,8 @@
*
* @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
* functions to adjust rfkill hw state
+ *
+ * @testmode_cmd: run a test mode command
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
@@ -865,8 +950,9 @@
int (*add_virtual_intf)(struct wiphy *wiphy, char *name,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params);
- int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex);
- int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex,
+ int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
+ int (*change_virtual_intf)(struct wiphy *wiphy,
+ struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params);
@@ -939,9 +1025,16 @@
int (*assoc)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_assoc_request *req);
int (*deauth)(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_deauth_request *req);
+ struct cfg80211_deauth_request *req,
+ void *cookie);
int (*disassoc)(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_disassoc_request *req);
+ struct cfg80211_disassoc_request *req,
+ void *cookie);
+
+ int (*connect)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_connect_params *sme);
+ int (*disconnect)(struct wiphy *wiphy, struct net_device *dev,
+ u16 reason_code);
int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ibss_params *params);
@@ -953,7 +1046,23 @@
enum tx_power_setting type, int dbm);
int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
+ int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *addr);
+
void (*rfkill_poll)(struct wiphy *wiphy);
+
+#ifdef CONFIG_NL80211_TESTMODE
+ int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+#endif
+
+ int (*set_bitrate_mask)(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *peer,
+ const struct cfg80211_bitrate_mask *mask);
+
+ /* some temporary stuff to finish wext */
+ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+ bool enabled, int timeout);
};
/*
@@ -996,6 +1105,12 @@
* @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
* -1 = fragmentation disabled, only odd values >= 256 used
* @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ * @net: the network namespace this wiphy currently lives in
+ * @netnsok: if set to false, do not allow changing the netns of this
+ * wiphy at all
+ * @ps_default: default for powersave, will be set depending on the
+ * kernel's default on wiphy_new(), but can be changed by the
+ * driver if it has a good reason to override the default
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1010,6 +1125,9 @@
bool strict_regulatory;
bool disable_beacon_hints;
+ bool netnsok;
+ bool ps_default;
+
enum cfg80211_signal_type signal_type;
int bss_priv_size;
@@ -1048,9 +1166,35 @@
/* dir in debugfs: ieee80211/<wiphyname> */
struct dentry *debugfsdir;
+#ifdef CONFIG_NET_NS
+ /* the network namespace this phy lives in currently */
+ struct net *_net;
+#endif
+
char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
};
+#ifdef CONFIG_NET_NS
+static inline struct net *wiphy_net(struct wiphy *wiphy)
+{
+ return wiphy->_net;
+}
+
+static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
+{
+ wiphy->_net = net;
+}
+#else
+static inline struct net *wiphy_net(struct wiphy *wiphy)
+{
+ return &init_net;
+}
+
+static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
+{
+}
+#endif
+
/**
* wiphy_priv - return priv from wiphy
*
@@ -1063,6 +1207,17 @@
}
/**
+ * priv_to_wiphy - return the wiphy containing the priv
+ *
+ * @priv: a pointer previously returned by wiphy_priv
+ */
+static inline struct wiphy *priv_to_wiphy(void *priv)
+{
+ BUG_ON(!priv);
+ return container_of(priv, struct wiphy, priv);
+}
+
+/**
* set_wiphy_dev - set device pointer for wiphy
*
* @wiphy: The wiphy whose device to bind
@@ -1134,6 +1289,13 @@
*/
extern void wiphy_free(struct wiphy *wiphy);
+/* internal structs */
+struct cfg80211_conn;
+struct cfg80211_internal_bss;
+struct cfg80211_cached_keys;
+
+#define MAX_AUTH_BSSES 4
+
/**
* struct wireless_dev - wireless per-netdev state
*
@@ -1157,22 +1319,45 @@
struct wiphy *wiphy;
enum nl80211_iftype iftype;
- /* private to the generic wireless code */
+ /* the remainder of this struct should be private to cfg80211 */
struct list_head list;
struct net_device *netdev;
- /* currently used for IBSS - might be rearranged in the future */
- struct cfg80211_bss *current_bss;
- u8 bssid[ETH_ALEN];
+ struct mutex mtx;
+
+ struct work_struct cleanup_work;
+
+ /* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len;
+ enum {
+ CFG80211_SME_IDLE,
+ CFG80211_SME_CONNECTING,
+ CFG80211_SME_CONNECTED,
+ } sme_state;
+ struct cfg80211_conn *conn;
+ struct cfg80211_cached_keys *connect_keys;
+
+ struct list_head event_list;
+ spinlock_t event_lock;
+
+ struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
+ struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
+ struct cfg80211_internal_bss *current_bss; /* associated / joined */
#ifdef CONFIG_WIRELESS_EXT
/* wext data */
struct {
struct cfg80211_ibss_params ibss;
- u8 bssid[ETH_ALEN];
+ struct cfg80211_connect_params connect;
+ struct cfg80211_cached_keys *keys;
+ u8 *ie;
+ size_t ie_len;
+ u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
s8 default_key, default_mgmt_key;
+ bool ps, prev_bssid_valid;
+ int ps_timeout;
} wext;
#endif
};
@@ -1352,20 +1537,6 @@
extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
/**
- * regulatory_hint_11d - hints a country IE as a regulatory domain
- * @wiphy: the wireless device giving the hint (used only for reporting
- * conflicts)
- * @country_ie: pointer to the country IE
- * @country_ie_len: length of the country IE
- *
- * We will intersect the rd with the what CRDA tells us should apply
- * for the alpha2 this country IE belongs to, this prevents APs from
- * sending us incorrect or outdated information against a country.
- */
-extern void regulatory_hint_11d(struct wiphy *wiphy,
- u8 *country_ie,
- u8 country_ie_len);
-/**
* wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
* @wiphy: the wireless device we want to process the regulatory domain on
* @regd: the custom regulatory domain to use for this wiphy
@@ -1433,27 +1604,34 @@
int cfg80211_wext_giwrange(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra);
-int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra);
-int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra);
-int cfg80211_ibss_wext_siwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid);
-int cfg80211_ibss_wext_giwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid);
-int cfg80211_ibss_wext_siwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra);
-int cfg80211_ibss_wext_giwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra);
+int cfg80211_wext_siwgenie(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra);
+int cfg80211_wext_siwauth(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *data, char *extra);
+int cfg80211_wext_giwauth(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *data, char *extra);
-struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
- struct iw_freq *freq);
+int cfg80211_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_wext_siwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra);
+int cfg80211_wext_giwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra);
int cfg80211_wext_siwrts(struct net_device *dev,
struct iw_request_info *info,
@@ -1488,6 +1666,21 @@
int cfg80211_wext_giwtxpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *data, char *keybuf);
+struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev);
+
+int cfg80211_wext_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra);
+int cfg80211_wext_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra);
+
+int cfg80211_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
/*
* callbacks for asynchronous cfg80211 methods, notification
@@ -1569,7 +1762,7 @@
* This function is called whenever an authentication has been processed in
* station mode. The driver is required to call either this function or
* cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
- * call.
+ * call. This function may sleep.
*/
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
@@ -1577,6 +1770,8 @@
* cfg80211_send_auth_timeout - notification of timed out authentication
* @dev: network device
* @addr: The MAC address of the device with which the authentication timed out
+ *
+ * This function may sleep.
*/
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
@@ -1589,7 +1784,7 @@
* This function is called whenever a (re)association response has been
* processed in station mode. The driver is required to call either this
* function or cfg80211_send_assoc_timeout() to indicate the result of
- * cfg80211_ops::assoc() call.
+ * cfg80211_ops::assoc() call. This function may sleep.
*/
void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
@@ -1597,6 +1792,8 @@
* cfg80211_send_assoc_timeout - notification of timed out association
* @dev: network device
* @addr: The MAC address of the device with which the association timed out
+ *
+ * This function may sleep.
*/
void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
@@ -1605,41 +1802,30 @@
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
+ * @cookie: cookie from ->deauth if called within that callback,
+ * %NULL otherwise
*
* This function is called whenever deauthentication has been processed in
* station mode. This includes both received deauthentication frames and
- * locally generated ones.
+ * locally generated ones. This function may sleep.
*/
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
+ void *cookie);
/**
* cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
* @buf: disassociation response frame (header + body)
* @len: length of the frame data
+ * @cookie: cookie from ->disassoc if called within that callback,
+ * %NULL otherwise
*
* This function is called whenever disassociation has been processed in
* station mode. This includes both received disassociation frames and locally
- * generated ones.
+ * generated ones. This function may sleep.
*/
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
-
-/**
- * cfg80211_hold_bss - exclude bss from expiration
- * @bss: bss which should not expire
- *
- * In a case when the BSS is not updated but it shouldn't expire this
- * function can be used to mark the BSS to be excluded from expiration.
- */
-void cfg80211_hold_bss(struct cfg80211_bss *bss);
-
-/**
- * cfg80211_unhold_bss - remove expiration exception from the BSS
- * @bss: bss which can expire again
- *
- * This function marks the BSS to be expirable again.
- */
-void cfg80211_unhold_bss(struct cfg80211_bss *bss);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
+ void *cookie);
/**
* cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
@@ -1648,6 +1834,7 @@
* @key_type: The key type that the received frame used
* @key_id: Key identifier (0..3)
* @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ * @gfp: allocation flags
*
* This function is called whenever the local MAC detects a MIC failure in a
* received frame. This matches with MLME-MICHAELMICFAILURE.indication()
@@ -1655,7 +1842,7 @@
*/
void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
enum nl80211_key_type key_type, int key_id,
- const u8 *tsc);
+ const u8 *tsc, gfp_t gfp);
/**
* cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
@@ -1692,4 +1879,137 @@
*/
void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+#ifdef CONFIG_NL80211_TESTMODE
+/**
+ * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ * be put into the skb
+ *
+ * This function allocates and pre-fills an skb for a reply to
+ * the testmode command. Since it is intended for a reply, calling
+ * it outside of the @testmode_cmd operation is invalid.
+ *
+ * The returned skb (or %NULL if any errors happen) is pre-filled
+ * with the wiphy index and set up in a way that any data that is
+ * put into the skb (with skb_put(), nla_put() or similar) will end
+ * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
+ * needs to be done with the skb is adding data for the corresponding
+ * userspace tool which can then read that data out of the testdata
+ * attribute. You must not modify the skb in any other way.
+ *
+ * When done, call cfg80211_testmode_reply() with the skb and return
+ * its error code as the result of the @testmode_cmd operation.
+ */
+struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
+ int approxlen);
+
+/**
+ * cfg80211_testmode_reply - send the reply skb
+ * @skb: The skb, must have been allocated with
+ * cfg80211_testmode_alloc_reply_skb()
+ *
+ * Returns an error code or 0 on success, since calling this
+ * function will usually be the last thing before returning
+ * from the @testmode_cmd you should return the error code.
+ * Note that this function consumes the skb regardless of the
+ * return value.
+ */
+int cfg80211_testmode_reply(struct sk_buff *skb);
+
+/**
+ * cfg80211_testmode_alloc_event_skb - allocate testmode event
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ * be put into the skb
+ * @gfp: allocation flags
+ *
+ * This function allocates and pre-fills an skb for an event on the
+ * testmode multicast group.
+ *
+ * The returned skb (or %NULL if any errors happen) is set up in the
+ * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
+ * for an event. As there, you should simply add data to it that will
+ * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
+ * not modify the skb in any other way.
+ *
+ * When done filling the skb, call cfg80211_testmode_event() with the
+ * skb to send the event.
+ */
+struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
+ int approxlen, gfp_t gfp);
+
+/**
+ * cfg80211_testmode_event - send the event
+ * @skb: The skb, must have been allocated with
+ * cfg80211_testmode_alloc_event_skb()
+ * @gfp: allocation flags
+ *
+ * This function sends the given @skb, which must have been allocated
+ * by cfg80211_testmode_alloc_event_skb(), as an event. It always
+ * consumes it.
+ */
+void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
+
+#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd),
+#else
+#define CFG80211_TESTMODE_CMD(cmd)
+#endif
+
+/**
+ * cfg80211_connect_result - notify cfg80211 of connection result
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @status: status code, 0 for successful connection, use
+ * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
+ * the real status code for failures.
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever connect() has
+ * succeeded.
+ */
+void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len,
+ u16 status, gfp_t gfp);
+
+/**
+ * cfg80211_roamed - notify cfg80211 of roaming
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the new AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever it roamed
+ * from one AP to another while connected.
+ */
+void cfg80211_roamed(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_disconnected - notify cfg80211 that connection was dropped
+ *
+ * @dev: network device
+ * @ie: information elements of the deauth/disassoc frame (may be %NULL)
+ * @ie_len: length of IEs
+ * @reason: reason code for the disconnection, set it to 0 if unknown
+ * @gfp: allocation flags
+ *
+ * After it calls this function, the driver should enter an idle state
+ * and not try to connect to any AP any more.
+ */
+void cfg80211_disconnected(struct net_device *dev, u16 reason,
+ u8 *ie, size_t ie_len, gfp_t gfp);
+
+
#endif /* __NET_CFG80211_H */
diff --git a/include/net/dcbnl.h b/include/net/dcbnl.h
index 775cfc8..b36ac7e 100644
--- a/include/net/dcbnl.h
+++ b/include/net/dcbnl.h
@@ -48,6 +48,8 @@
void (*setbcncfg)(struct net_device *, int, u32);
void (*getbcnrp)(struct net_device *, int, u8 *);
void (*setbcnrp)(struct net_device *, int, u8);
+ u8 (*setapp)(struct net_device *, u8, u16, u8);
+ u8 (*getapp)(struct net_device *, u8, u16);
};
#endif /* __NET_DCBNL_H__ */
diff --git a/include/net/dst.h b/include/net/dst.h
index 7fc409c..5a900dd 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -8,6 +8,7 @@
#ifndef _NET_DST_H
#define _NET_DST_H
+#include <net/dst_ops.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <linux/rcupdate.h>
@@ -102,28 +103,6 @@
};
};
-
-struct dst_ops
-{
- unsigned short family;
- __be16 protocol;
- unsigned gc_thresh;
-
- int (*gc)(struct dst_ops *ops);
- struct dst_entry * (*check)(struct dst_entry *, __u32 cookie);
- void (*destroy)(struct dst_entry *);
- void (*ifdown)(struct dst_entry *,
- struct net_device *dev, int how);
- struct dst_entry * (*negative_advice)(struct dst_entry *);
- void (*link_failure)(struct sk_buff *);
- void (*update_pmtu)(struct dst_entry *dst, u32 mtu);
- int (*local_out)(struct sk_buff *skb);
-
- atomic_t entries;
- struct kmem_cache *kmem_cachep;
- struct net *dst_net;
-};
-
#ifdef __KERNEL__
static inline u32
diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
new file mode 100644
index 0000000..d1ff9b7
--- /dev/null
+++ b/include/net/dst_ops.h
@@ -0,0 +1,28 @@
+#ifndef _NET_DST_OPS_H
+#define _NET_DST_OPS_H
+#include <linux/types.h>
+
+struct dst_entry;
+struct kmem_cachep;
+struct net_device;
+struct sk_buff;
+
+struct dst_ops {
+ unsigned short family;
+ __be16 protocol;
+ unsigned gc_thresh;
+
+ int (*gc)(struct dst_ops *ops);
+ struct dst_entry * (*check)(struct dst_entry *, __u32 cookie);
+ void (*destroy)(struct dst_entry *);
+ void (*ifdown)(struct dst_entry *,
+ struct net_device *dev, int how);
+ struct dst_entry * (*negative_advice)(struct dst_entry *);
+ void (*link_failure)(struct sk_buff *);
+ void (*update_pmtu)(struct dst_entry *dst, u32 mtu);
+ int (*local_out)(struct sk_buff *skb);
+
+ atomic_t entries;
+ struct kmem_cache *kmem_cachep;
+};
+#endif
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 1b0e3ee..2a1c0687 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -3,6 +3,7 @@
#include <linux/genetlink.h>
#include <net/netlink.h>
+#include <net/net_namespace.h>
/**
* struct genl_multicast_group - generic netlink multicast group
@@ -27,6 +28,8 @@
* @name: name of family
* @version: protocol version
* @maxattr: maximum number of attributes supported
+ * @netnsok: set to true if the family can handle network
+ * namespaces and should be presented in all of them
* @attrbuf: buffer to store parsed attributes
* @ops_list: list of all assigned operations
* @family_list: family list
@@ -39,6 +42,7 @@
char name[GENL_NAMSIZ];
unsigned int version;
unsigned int maxattr;
+ bool netnsok;
struct nlattr ** attrbuf; /* private */
struct list_head ops_list; /* private */
struct list_head family_list; /* private */
@@ -62,8 +66,32 @@
struct genlmsghdr * genlhdr;
void * userhdr;
struct nlattr ** attrs;
+#ifdef CONFIG_NET_NS
+ struct net * _net;
+#endif
};
+#ifdef CONFIG_NET_NS
+static inline struct net *genl_info_net(struct genl_info *info)
+{
+ return info->_net;
+}
+
+static inline void genl_info_net_set(struct genl_info *info, struct net *net)
+{
+ info->_net = net;
+}
+#else
+static inline struct net *genl_info_net(struct genl_info *info)
+{
+ return &init_net;
+}
+
+static inline void genl_info_net_set(struct genl_info *info, struct net *net)
+{
+}
+#endif
+
/**
* struct genl_ops - generic netlink operations
* @cmd: command identifier
@@ -98,8 +126,6 @@
extern void genl_unregister_mc_group(struct genl_family *family,
struct genl_multicast_group *grp);
-extern struct sock *genl_sock;
-
/**
* genlmsg_put - Add generic netlink header to netlink message
* @skb: socket buffer holding the message
@@ -170,7 +196,21 @@
}
/**
- * genlmsg_multicast - multicast a netlink message
+ * genlmsg_multicast_netns - multicast a netlink message to a specific netns
+ * @net: the net namespace
+ * @skb: netlink message as socket buffer
+ * @pid: own netlink pid to avoid sending to yourself
+ * @group: multicast group id
+ * @flags: allocation flags
+ */
+static inline int genlmsg_multicast_netns(struct net *net, struct sk_buff *skb,
+ u32 pid, unsigned int group, gfp_t flags)
+{
+ return nlmsg_multicast(net->genl_sock, skb, pid, group, flags);
+}
+
+/**
+ * genlmsg_multicast - multicast a netlink message to the default netns
* @skb: netlink message as socket buffer
* @pid: own netlink pid to avoid sending to yourself
* @group: multicast group id
@@ -179,17 +219,29 @@
static inline int genlmsg_multicast(struct sk_buff *skb, u32 pid,
unsigned int group, gfp_t flags)
{
- return nlmsg_multicast(genl_sock, skb, pid, group, flags);
+ return genlmsg_multicast_netns(&init_net, skb, pid, group, flags);
}
/**
+ * genlmsg_multicast_allns - multicast a netlink message to all net namespaces
+ * @skb: netlink message as socket buffer
+ * @pid: own netlink pid to avoid sending to yourself
+ * @group: multicast group id
+ * @flags: allocation flags
+ *
+ * This function must hold the RTNL or rcu_read_lock().
+ */
+int genlmsg_multicast_allns(struct sk_buff *skb, u32 pid,
+ unsigned int group, gfp_t flags);
+
+/**
* genlmsg_unicast - unicast a netlink message
* @skb: netlink message as socket buffer
* @pid: netlink pid of the destination socket
*/
-static inline int genlmsg_unicast(struct sk_buff *skb, u32 pid)
+static inline int genlmsg_unicast(struct net *net, struct sk_buff *skb, u32 pid)
{
- return nlmsg_unicast(genl_sock, skb, pid);
+ return nlmsg_unicast(net->genl_sock, skb, pid);
}
/**
@@ -199,7 +251,7 @@
*/
static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info)
{
- return genlmsg_unicast(skb, info->snd_pid);
+ return genlmsg_unicast(genl_info_net(info), skb, info->snd_pid);
}
/**
diff --git a/include/net/ieee802154.h b/include/net/ieee802154.h
new file mode 100644
index 0000000..d52685d
--- /dev/null
+++ b/include/net/ieee802154.h
@@ -0,0 +1,160 @@
+/*
+ * IEEE802.15.4-2003 specification
+ *
+ * Copyright (C) 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef NET_IEEE802154_H
+#define NET_IEEE802154_H
+
+#define IEEE802154_FC_TYPE_BEACON 0x0 /* Frame is beacon */
+#define IEEE802154_FC_TYPE_DATA 0x1 /* Frame is data */
+#define IEEE802154_FC_TYPE_ACK 0x2 /* Frame is acknowledgment */
+#define IEEE802154_FC_TYPE_MAC_CMD 0x3 /* Frame is MAC command */
+
+#define IEEE802154_FC_TYPE_SHIFT 0
+#define IEEE802154_FC_TYPE_MASK ((1 << 3) - 1)
+#define IEEE802154_FC_TYPE(x) ((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT)
+#define IEEE802154_FC_SET_TYPE(v, x) do { \
+ v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \
+ (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \
+ } while (0)
+
+#define IEEE802154_FC_SECEN (1 << 3)
+#define IEEE802154_FC_FRPEND (1 << 4)
+#define IEEE802154_FC_ACK_REQ (1 << 5)
+#define IEEE802154_FC_INTRA_PAN (1 << 6)
+
+#define IEEE802154_FC_SAMODE_SHIFT 14
+#define IEEE802154_FC_SAMODE_MASK (3 << IEEE802154_FC_SAMODE_SHIFT)
+#define IEEE802154_FC_DAMODE_SHIFT 10
+#define IEEE802154_FC_DAMODE_MASK (3 << IEEE802154_FC_DAMODE_SHIFT)
+
+#define IEEE802154_FC_SAMODE(x) \
+ (((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT)
+
+#define IEEE802154_FC_DAMODE(x) \
+ (((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT)
+
+
+/* MAC's Command Frames Identifiers */
+#define IEEE802154_CMD_ASSOCIATION_REQ 0x01
+#define IEEE802154_CMD_ASSOCIATION_RESP 0x02
+#define IEEE802154_CMD_DISASSOCIATION_NOTIFY 0x03
+#define IEEE802154_CMD_DATA_REQ 0x04
+#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY 0x05
+#define IEEE802154_CMD_ORPHAN_NOTIFY 0x06
+#define IEEE802154_CMD_BEACON_REQ 0x07
+#define IEEE802154_CMD_COORD_REALIGN_NOTIFY 0x08
+#define IEEE802154_CMD_GTS_REQ 0x09
+
+/*
+ * The return values of MAC operations
+ */
+enum {
+ /*
+ * The requested operation was completed successfully.
+ * For a transmission request, this value indicates
+ * a successful transmission.
+ */
+ IEEE802154_SUCCESS = 0x0,
+
+ /* The beacon was lost following a synchronization request. */
+ IEEE802154_BEACON_LOSS = 0xe0,
+ /*
+ * A transmission could not take place due to activity on the
+ * channel, i.e., the CSMA-CA mechanism has failed.
+ */
+ IEEE802154_CHNL_ACCESS_FAIL = 0xe1,
+ /* The GTS request has been denied by the PAN coordinator. */
+ IEEE802154_DENINED = 0xe2,
+ /* The attempt to disable the transceiver has failed. */
+ IEEE802154_DISABLE_TRX_FAIL = 0xe3,
+ /*
+ * The received frame induces a failed security check according to
+ * the security suite.
+ */
+ IEEE802154_FAILED_SECURITY_CHECK = 0xe4,
+ /*
+ * The frame resulting from secure processing has a length that is
+ * greater than aMACMaxFrameSize.
+ */
+ IEEE802154_FRAME_TOO_LONG = 0xe5,
+ /*
+ * The requested GTS transmission failed because the specified GTS
+ * either did not have a transmit GTS direction or was not defined.
+ */
+ IEEE802154_INVALID_GTS = 0xe6,
+ /*
+ * A request to purge an MSDU from the transaction queue was made using
+ * an MSDU handle that was not found in the transaction table.
+ */
+ IEEE802154_INVALID_HANDLE = 0xe7,
+ /* A parameter in the primitive is out of the valid range.*/
+ IEEE802154_INVALID_PARAMETER = 0xe8,
+ /* No acknowledgment was received after aMaxFrameRetries. */
+ IEEE802154_NO_ACK = 0xe9,
+ /* A scan operation failed to find any network beacons.*/
+ IEEE802154_NO_BEACON = 0xea,
+ /* No response data were available following a request. */
+ IEEE802154_NO_DATA = 0xeb,
+ /* The operation failed because a short address was not allocated. */
+ IEEE802154_NO_SHORT_ADDRESS = 0xec,
+ /*
+ * A receiver enable request was unsuccessful because it could not be
+ * completed within the CAP.
+ */
+ IEEE802154_OUT_OF_CAP = 0xed,
+ /*
+ * A PAN identifier conflict has been detected and communicated to the
+ * PAN coordinator.
+ */
+ IEEE802154_PANID_CONFLICT = 0xee,
+ /* A coordinator realignment command has been received. */
+ IEEE802154_REALIGMENT = 0xef,
+ /* The transaction has expired and its information discarded. */
+ IEEE802154_TRANSACTION_EXPIRED = 0xf0,
+ /* There is no capacity to store the transaction. */
+ IEEE802154_TRANSACTION_OVERFLOW = 0xf1,
+ /*
+ * The transceiver was in the transmitter enabled state when the
+ * receiver was requested to be enabled.
+ */
+ IEEE802154_TX_ACTIVE = 0xf2,
+ /* The appropriate key is not available in the ACL. */
+ IEEE802154_UNAVAILABLE_KEY = 0xf3,
+ /*
+ * A SET/GET request was issued with the identifier of a PIB attribute
+ * that is not supported.
+ */
+ IEEE802154_UNSUPPORTED_ATTR = 0xf4,
+ /*
+ * A request to perform a scan operation failed because the MLME was
+ * in the process of performing a previously initiated scan operation.
+ */
+ IEEE802154_SCAN_IN_PROGRESS = 0xfc,
+};
+
+
+#endif
+
+
diff --git a/include/net/ieee802154/af_ieee802154.h b/include/net/ieee802154/af_ieee802154.h
deleted file mode 100644
index 0d78605..0000000
--- a/include/net/ieee802154/af_ieee802154.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * IEEE 802.15.4 inteface for userspace
- *
- * Copyright 2007, 2008 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Written by:
- * Sergey Lapin <slapin@ossfans.org>
- * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
- */
-
-#ifndef _AF_IEEE802154_H
-#define _AF_IEEE802154_H
-
-#include <linux/socket.h> /* for sa_family_t */
-
-enum {
- IEEE802154_ADDR_NONE = 0x0,
- /* RESERVED = 0x01, */
- IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */
- IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */
-};
-
-/* address length, octets */
-#define IEEE802154_ADDR_LEN 8
-
-struct ieee802154_addr {
- int addr_type;
- u16 pan_id;
- union {
- u8 hwaddr[IEEE802154_ADDR_LEN];
- u16 short_addr;
- };
-};
-
-#define IEEE802154_PANID_BROADCAST 0xffff
-#define IEEE802154_ADDR_BROADCAST 0xffff
-#define IEEE802154_ADDR_UNDEF 0xfffe
-
-struct sockaddr_ieee802154 {
- sa_family_t family; /* AF_IEEE802154 */
- struct ieee802154_addr addr;
-};
-
-/* master device */
-#define IEEE802154_SIOC_ADD_SLAVE (SIOCDEVPRIVATE + 0)
-
-#endif
diff --git a/include/net/ieee802154/mac_def.h b/include/net/ieee802154/mac_def.h
deleted file mode 100644
index 8cb6846..0000000
--- a/include/net/ieee802154/mac_def.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * IEEE802.15.4-2003 specification
- *
- * Copyright (C) 2007, 2008 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Written by:
- * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
- * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
- * Maxim Osipov <maxim.osipov@siemens.com>
- * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
- */
-
-#ifndef IEEE802154_MAC_DEF_H
-#define IEEE802154_MAC_DEF_H
-
-#define IEEE802154_FC_TYPE_BEACON 0x0 /* Frame is beacon */
-#define IEEE802154_FC_TYPE_DATA 0x1 /* Frame is data */
-#define IEEE802154_FC_TYPE_ACK 0x2 /* Frame is acknowledgment */
-#define IEEE802154_FC_TYPE_MAC_CMD 0x3 /* Frame is MAC command */
-
-#define IEEE802154_FC_TYPE_SHIFT 0
-#define IEEE802154_FC_TYPE_MASK ((1 << 3) - 1)
-#define IEEE802154_FC_TYPE(x) ((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT)
-#define IEEE802154_FC_SET_TYPE(v, x) do { \
- v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \
- (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \
- } while (0)
-
-#define IEEE802154_FC_SECEN (1 << 3)
-#define IEEE802154_FC_FRPEND (1 << 4)
-#define IEEE802154_FC_ACK_REQ (1 << 5)
-#define IEEE802154_FC_INTRA_PAN (1 << 6)
-
-#define IEEE802154_FC_SAMODE_SHIFT 14
-#define IEEE802154_FC_SAMODE_MASK (3 << IEEE802154_FC_SAMODE_SHIFT)
-#define IEEE802154_FC_DAMODE_SHIFT 10
-#define IEEE802154_FC_DAMODE_MASK (3 << IEEE802154_FC_DAMODE_SHIFT)
-
-#define IEEE802154_FC_SAMODE(x) \
- (((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT)
-
-#define IEEE802154_FC_DAMODE(x) \
- (((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT)
-
-
-/* MAC's Command Frames Identifiers */
-#define IEEE802154_CMD_ASSOCIATION_REQ 0x01
-#define IEEE802154_CMD_ASSOCIATION_RESP 0x02
-#define IEEE802154_CMD_DISASSOCIATION_NOTIFY 0x03
-#define IEEE802154_CMD_DATA_REQ 0x04
-#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY 0x05
-#define IEEE802154_CMD_ORPHAN_NOTIFY 0x06
-#define IEEE802154_CMD_BEACON_REQ 0x07
-#define IEEE802154_CMD_COORD_REALIGN_NOTIFY 0x08
-#define IEEE802154_CMD_GTS_REQ 0x09
-
-/*
- * The return values of MAC operations
- */
-enum {
- /*
- * The requested operation was completed successfully.
- * For a transmission request, this value indicates
- * a successful transmission.
- */
- IEEE802154_SUCCESS = 0x0,
-
- /* The beacon was lost following a synchronization request. */
- IEEE802154_BEACON_LOSS = 0xe0,
- /*
- * A transmission could not take place due to activity on the
- * channel, i.e., the CSMA-CA mechanism has failed.
- */
- IEEE802154_CHNL_ACCESS_FAIL = 0xe1,
- /* The GTS request has been denied by the PAN coordinator. */
- IEEE802154_DENINED = 0xe2,
- /* The attempt to disable the transceiver has failed. */
- IEEE802154_DISABLE_TRX_FAIL = 0xe3,
- /*
- * The received frame induces a failed security check according to
- * the security suite.
- */
- IEEE802154_FAILED_SECURITY_CHECK = 0xe4,
- /*
- * The frame resulting from secure processing has a length that is
- * greater than aMACMaxFrameSize.
- */
- IEEE802154_FRAME_TOO_LONG = 0xe5,
- /*
- * The requested GTS transmission failed because the specified GTS
- * either did not have a transmit GTS direction or was not defined.
- */
- IEEE802154_INVALID_GTS = 0xe6,
- /*
- * A request to purge an MSDU from the transaction queue was made using
- * an MSDU handle that was not found in the transaction table.
- */
- IEEE802154_INVALID_HANDLE = 0xe7,
- /* A parameter in the primitive is out of the valid range.*/
- IEEE802154_INVALID_PARAMETER = 0xe8,
- /* No acknowledgment was received after aMaxFrameRetries. */
- IEEE802154_NO_ACK = 0xe9,
- /* A scan operation failed to find any network beacons.*/
- IEEE802154_NO_BEACON = 0xea,
- /* No response data were available following a request. */
- IEEE802154_NO_DATA = 0xeb,
- /* The operation failed because a short address was not allocated. */
- IEEE802154_NO_SHORT_ADDRESS = 0xec,
- /*
- * A receiver enable request was unsuccessful because it could not be
- * completed within the CAP.
- */
- IEEE802154_OUT_OF_CAP = 0xed,
- /*
- * A PAN identifier conflict has been detected and communicated to the
- * PAN coordinator.
- */
- IEEE802154_PANID_CONFLICT = 0xee,
- /* A coordinator realignment command has been received. */
- IEEE802154_REALIGMENT = 0xef,
- /* The transaction has expired and its information discarded. */
- IEEE802154_TRANSACTION_EXPIRED = 0xf0,
- /* There is no capacity to store the transaction. */
- IEEE802154_TRANSACTION_OVERFLOW = 0xf1,
- /*
- * The transceiver was in the transmitter enabled state when the
- * receiver was requested to be enabled.
- */
- IEEE802154_TX_ACTIVE = 0xf2,
- /* The appropriate key is not available in the ACL. */
- IEEE802154_UNAVAILABLE_KEY = 0xf3,
- /*
- * A SET/GET request was issued with the identifier of a PIB attribute
- * that is not supported.
- */
- IEEE802154_UNSUPPORTED_ATTR = 0xf4,
- /*
- * A request to perform a scan operation failed because the MLME was
- * in the process of performing a previously initiated scan operation.
- */
- IEEE802154_SCAN_IN_PROGRESS = 0xfc,
-};
-
-
-#endif
-
-
diff --git a/include/net/ieee802154/netdevice.h b/include/net/ieee802154/netdevice.h
deleted file mode 100644
index e2506af..0000000
--- a/include/net/ieee802154/netdevice.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * An interface between IEEE802.15.4 device and rest of the kernel.
- *
- * Copyright (C) 2007, 2008, 2009 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Written by:
- * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
- * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
- * Maxim Osipov <maxim.osipov@siemens.com>
- * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
- */
-
-#ifndef IEEE802154_NETDEVICE_H
-#define IEEE802154_NETDEVICE_H
-
-/*
- * A control block of skb passed between the ARPHRD_IEEE802154 device
- * and other stack parts.
- */
-struct ieee802154_mac_cb {
- u8 lqi;
- struct ieee802154_addr sa;
- struct ieee802154_addr da;
- u8 flags;
- u8 seq;
-};
-
-static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb)
-{
- return (struct ieee802154_mac_cb *)skb->cb;
-}
-
-#define MAC_CB_FLAG_TYPEMASK ((1 << 3) - 1)
-
-#define MAC_CB_FLAG_ACKREQ (1 << 3)
-#define MAC_CB_FLAG_SECEN (1 << 4)
-#define MAC_CB_FLAG_INTRAPAN (1 << 5)
-
-static inline int mac_cb_is_ackreq(struct sk_buff *skb)
-{
- return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ;
-}
-
-static inline int mac_cb_is_secen(struct sk_buff *skb)
-{
- return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN;
-}
-
-static inline int mac_cb_is_intrapan(struct sk_buff *skb)
-{
- return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN;
-}
-
-static inline int mac_cb_type(struct sk_buff *skb)
-{
- return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK;
-}
-
-#define IEEE802154_MAC_SCAN_ED 0
-#define IEEE802154_MAC_SCAN_ACTIVE 1
-#define IEEE802154_MAC_SCAN_PASSIVE 2
-#define IEEE802154_MAC_SCAN_ORPHAN 3
-
-/*
- * This should be located at net_device->ml_priv
- */
-struct ieee802154_mlme_ops {
- int (*assoc_req)(struct net_device *dev,
- struct ieee802154_addr *addr,
- u8 channel, u8 cap);
- int (*assoc_resp)(struct net_device *dev,
- struct ieee802154_addr *addr,
- u16 short_addr, u8 status);
- int (*disassoc_req)(struct net_device *dev,
- struct ieee802154_addr *addr,
- u8 reason);
- int (*start_req)(struct net_device *dev,
- struct ieee802154_addr *addr,
- u8 channel, u8 bcn_ord, u8 sf_ord,
- u8 pan_coord, u8 blx, u8 coord_realign);
- int (*scan_req)(struct net_device *dev,
- u8 type, u32 channels, u8 duration);
-
- /*
- * FIXME: these should become the part of PIB/MIB interface.
- * However we still don't have IB interface of any kind
- */
- u16 (*get_pan_id)(struct net_device *dev);
- u16 (*get_short_addr)(struct net_device *dev);
- u8 (*get_dsn)(struct net_device *dev);
- u8 (*get_bsn)(struct net_device *dev);
-};
-
-static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops(
- struct net_device *dev)
-{
- return dev->ml_priv;
-}
-
-#endif
-
-
diff --git a/include/net/ieee802154/nl802154.h b/include/net/ieee802154/nl802154.h
deleted file mode 100644
index 78efcdf..0000000
--- a/include/net/ieee802154/nl802154.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * nl802154.h
- *
- * Copyright (C) 2007, 2008, 2009 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef IEEE802154_NL_H
-#define IEEE802154_NL_H
-
-struct net_device;
-struct ieee802154_addr;
-
-int ieee802154_nl_assoc_indic(struct net_device *dev,
- struct ieee802154_addr *addr, u8 cap);
-int ieee802154_nl_assoc_confirm(struct net_device *dev,
- u16 short_addr, u8 status);
-int ieee802154_nl_disassoc_indic(struct net_device *dev,
- struct ieee802154_addr *addr, u8 reason);
-int ieee802154_nl_disassoc_confirm(struct net_device *dev,
- u8 status);
-int ieee802154_nl_scan_confirm(struct net_device *dev,
- u8 status, u8 scan_type, u32 unscanned,
- u8 *edl/*, struct list_head *pan_desc_list */);
-int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid,
- u16 coord_addr);
-
-#endif
diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h
new file mode 100644
index 0000000..5dc6a61
--- /dev/null
+++ b/include/net/ieee802154_netdev.h
@@ -0,0 +1,115 @@
+/*
+ * An interface between IEEE802.15.4 device and rest of the kernel.
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef IEEE802154_NETDEVICE_H
+#define IEEE802154_NETDEVICE_H
+
+/*
+ * A control block of skb passed between the ARPHRD_IEEE802154 device
+ * and other stack parts.
+ */
+struct ieee802154_mac_cb {
+ u8 lqi;
+ struct ieee802154_addr sa;
+ struct ieee802154_addr da;
+ u8 flags;
+ u8 seq;
+};
+
+static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb)
+{
+ return (struct ieee802154_mac_cb *)skb->cb;
+}
+
+#define MAC_CB_FLAG_TYPEMASK ((1 << 3) - 1)
+
+#define MAC_CB_FLAG_ACKREQ (1 << 3)
+#define MAC_CB_FLAG_SECEN (1 << 4)
+#define MAC_CB_FLAG_INTRAPAN (1 << 5)
+
+static inline int mac_cb_is_ackreq(struct sk_buff *skb)
+{
+ return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ;
+}
+
+static inline int mac_cb_is_secen(struct sk_buff *skb)
+{
+ return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN;
+}
+
+static inline int mac_cb_is_intrapan(struct sk_buff *skb)
+{
+ return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN;
+}
+
+static inline int mac_cb_type(struct sk_buff *skb)
+{
+ return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK;
+}
+
+#define IEEE802154_MAC_SCAN_ED 0
+#define IEEE802154_MAC_SCAN_ACTIVE 1
+#define IEEE802154_MAC_SCAN_PASSIVE 2
+#define IEEE802154_MAC_SCAN_ORPHAN 3
+
+/*
+ * This should be located at net_device->ml_priv
+ */
+struct ieee802154_mlme_ops {
+ int (*assoc_req)(struct net_device *dev,
+ struct ieee802154_addr *addr,
+ u8 channel, u8 page, u8 cap);
+ int (*assoc_resp)(struct net_device *dev,
+ struct ieee802154_addr *addr,
+ u16 short_addr, u8 status);
+ int (*disassoc_req)(struct net_device *dev,
+ struct ieee802154_addr *addr,
+ u8 reason);
+ int (*start_req)(struct net_device *dev,
+ struct ieee802154_addr *addr,
+ u8 channel, u8 page, u8 bcn_ord, u8 sf_ord,
+ u8 pan_coord, u8 blx, u8 coord_realign);
+ int (*scan_req)(struct net_device *dev,
+ u8 type, u32 channels, u8 page, u8 duration);
+
+ /*
+ * FIXME: these should become the part of PIB/MIB interface.
+ * However we still don't have IB interface of any kind
+ */
+ u16 (*get_pan_id)(struct net_device *dev);
+ u16 (*get_short_addr)(struct net_device *dev);
+ u8 (*get_dsn)(struct net_device *dev);
+ u8 (*get_bsn)(struct net_device *dev);
+};
+
+static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops(
+ struct net_device *dev)
+{
+ return dev->ml_priv;
+}
+
+#endif
+
+
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 7c5c0f7..15b492a 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -22,6 +22,12 @@
#include <net/flow.h>
#include <net/netlink.h>
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+#define FIB6_TABLE_HASHSZ 256
+#else
+#define FIB6_TABLE_HASHSZ 1
+#endif
+
struct rt6_info;
struct fib6_config
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index bbae1e8..98978e7 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -99,47 +99,47 @@
return &buf[*idx - len];
}
-#define IP_VS_DBG_BUF(level, msg...) \
- do { \
- char ip_vs_dbg_buf[160]; \
- int ip_vs_dbg_idx = 0; \
- if (level <= ip_vs_get_debug_level()) \
- printk(KERN_DEBUG "IPVS: " msg); \
- } while (0)
-#define IP_VS_ERR_BUF(msg...) \
- do { \
- char ip_vs_dbg_buf[160]; \
- int ip_vs_dbg_idx = 0; \
- printk(KERN_ERR "IPVS: " msg); \
- } while (0)
+#define IP_VS_DBG_BUF(level, msg, ...) \
+ do { \
+ char ip_vs_dbg_buf[160]; \
+ int ip_vs_dbg_idx = 0; \
+ if (level <= ip_vs_get_debug_level()) \
+ printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
+ } while (0)
+#define IP_VS_ERR_BUF(msg...) \
+ do { \
+ char ip_vs_dbg_buf[160]; \
+ int ip_vs_dbg_idx = 0; \
+ pr_err(msg); \
+ } while (0)
/* Only use from within IP_VS_DBG_BUF() or IP_VS_ERR_BUF macros */
-#define IP_VS_DBG_ADDR(af, addr) \
- ip_vs_dbg_addr(af, ip_vs_dbg_buf, \
- sizeof(ip_vs_dbg_buf), addr, \
- &ip_vs_dbg_idx)
+#define IP_VS_DBG_ADDR(af, addr) \
+ ip_vs_dbg_addr(af, ip_vs_dbg_buf, \
+ sizeof(ip_vs_dbg_buf), addr, \
+ &ip_vs_dbg_idx)
-#define IP_VS_DBG(level, msg...) \
- do { \
- if (level <= ip_vs_get_debug_level()) \
- printk(KERN_DEBUG "IPVS: " msg); \
- } while (0)
-#define IP_VS_DBG_RL(msg...) \
- do { \
- if (net_ratelimit()) \
- printk(KERN_DEBUG "IPVS: " msg); \
- } while (0)
-#define IP_VS_DBG_PKT(level, pp, skb, ofs, msg) \
- do { \
- if (level <= ip_vs_get_debug_level()) \
- pp->debug_packet(pp, skb, ofs, msg); \
- } while (0)
-#define IP_VS_DBG_RL_PKT(level, pp, skb, ofs, msg) \
- do { \
- if (level <= ip_vs_get_debug_level() && \
- net_ratelimit()) \
- pp->debug_packet(pp, skb, ofs, msg); \
- } while (0)
+#define IP_VS_DBG(level, msg, ...) \
+ do { \
+ if (level <= ip_vs_get_debug_level()) \
+ printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
+ } while (0)
+#define IP_VS_DBG_RL(msg, ...) \
+ do { \
+ if (net_ratelimit()) \
+ printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
+ } while (0)
+#define IP_VS_DBG_PKT(level, pp, skb, ofs, msg) \
+ do { \
+ if (level <= ip_vs_get_debug_level()) \
+ pp->debug_packet(pp, skb, ofs, msg); \
+ } while (0)
+#define IP_VS_DBG_RL_PKT(level, pp, skb, ofs, msg) \
+ do { \
+ if (level <= ip_vs_get_debug_level() && \
+ net_ratelimit()) \
+ pp->debug_packet(pp, skb, ofs, msg); \
+ } while (0)
#else /* NO DEBUGGING at ALL */
#define IP_VS_DBG_BUF(level, msg...) do {} while (0)
#define IP_VS_ERR_BUF(msg...) do {} while (0)
@@ -150,29 +150,27 @@
#endif
#define IP_VS_BUG() BUG()
-#define IP_VS_ERR(msg...) printk(KERN_ERR "IPVS: " msg)
-#define IP_VS_INFO(msg...) printk(KERN_INFO "IPVS: " msg)
-#define IP_VS_WARNING(msg...) \
- printk(KERN_WARNING "IPVS: " msg)
-#define IP_VS_ERR_RL(msg...) \
- do { \
- if (net_ratelimit()) \
- printk(KERN_ERR "IPVS: " msg); \
- } while (0)
+#define IP_VS_ERR_RL(msg, ...) \
+ do { \
+ if (net_ratelimit()) \
+ pr_err(msg, ##__VA_ARGS__); \
+ } while (0)
#ifdef CONFIG_IP_VS_DEBUG
#define EnterFunction(level) \
- do { \
- if (level <= ip_vs_get_debug_level()) \
- printk(KERN_DEBUG "Enter: %s, %s line %i\n", \
- __func__, __FILE__, __LINE__); \
- } while (0)
-#define LeaveFunction(level) \
- do { \
- if (level <= ip_vs_get_debug_level()) \
- printk(KERN_DEBUG "Leave: %s, %s line %i\n", \
- __func__, __FILE__, __LINE__); \
- } while (0)
+ do { \
+ if (level <= ip_vs_get_debug_level()) \
+ printk(KERN_DEBUG \
+ pr_fmt("Enter: %s, %s line %i\n"), \
+ __func__, __FILE__, __LINE__); \
+ } while (0)
+#define LeaveFunction(level) \
+ do { \
+ if (level <= ip_vs_get_debug_level()) \
+ printk(KERN_DEBUG \
+ pr_fmt("Leave: %s, %s line %i\n"), \
+ __func__, __FILE__, __LINE__); \
+ } while (0)
#else
#define EnterFunction(level) do {} while (0)
#define LeaveFunction(level) do {} while (0)
@@ -740,7 +738,8 @@
extern void ip_vs_protocol_timeout_change(int flags);
extern int *ip_vs_create_timeout_table(int *table, int size);
extern int
-ip_vs_set_state_timeout(int *table, int num, char **names, char *name, int to);
+ip_vs_set_state_timeout(int *table, int num, const char *const *names,
+ const char *name, int to);
extern void
ip_vs_tcpudp_debug_packet(struct ip_vs_protocol *pp, const struct sk_buff *skb,
int offset, const char *msg);
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index f27fd83..ad9a511 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -441,6 +441,18 @@
return __ipv6_addr_diff(a1, a2, sizeof(struct in6_addr));
}
+static __inline__ void ipv6_select_ident(struct frag_hdr *fhdr)
+{
+ static u32 ipv6_fragmentation_id = 1;
+ static DEFINE_SPINLOCK(ip6_id_lock);
+
+ spin_lock_bh(&ip6_id_lock);
+ fhdr->identification = htonl(ipv6_fragmentation_id);
+ if (++ipv6_fragmentation_id == 0)
+ ipv6_fragmentation_id = 1;
+ spin_unlock_bh(&ip6_id_lock);
+}
+
/*
* Prototypes exported by ipv6
*/
diff --git a/include/net/irda/ircomm_event.h b/include/net/irda/ircomm_event.h
index c290447..bc0c6f3 100644
--- a/include/net/irda/ircomm_event.h
+++ b/include/net/irda/ircomm_event.h
@@ -74,7 +74,7 @@
struct qos_info *qos;
};
-extern char *ircomm_state[];
+extern const char *const ircomm_state[];
struct ircomm_cb; /* Forward decl. */
diff --git a/include/net/irda/ircomm_tty_attach.h b/include/net/irda/ircomm_tty_attach.h
index f91a5695..0a63bbb 100644
--- a/include/net/irda/ircomm_tty_attach.h
+++ b/include/net/irda/ircomm_tty_attach.h
@@ -66,8 +66,8 @@
__u8 dlsap_sel;
};
-extern char *ircomm_state[];
-extern char *ircomm_tty_state[];
+extern const char *const ircomm_state[];
+extern const char *const ircomm_tty_state[];
int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
struct sk_buff *skb, struct ircomm_tty_info *info);
diff --git a/include/net/irda/irlap_event.h b/include/net/irda/irlap_event.h
index 2ae2e119..4c90824 100644
--- a/include/net/irda/irlap_event.h
+++ b/include/net/irda/irlap_event.h
@@ -120,7 +120,7 @@
LAP_PRIMARY_CONFLICT,
} LAP_REASON;
-extern const char *irlap_state[];
+extern const char *const irlap_state[];
void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event,
struct sk_buff *skb, struct irlap_info *info);
diff --git a/include/net/irda/irlmp_event.h b/include/net/irda/irlmp_event.h
index e03ae4a..9e4ec17 100644
--- a/include/net/irda/irlmp_event.h
+++ b/include/net/irda/irlmp_event.h
@@ -79,8 +79,8 @@
LM_LAP_IDLE_TIMEOUT,
} IRLMP_EVENT;
-extern const char *irlmp_state[];
-extern const char *irlsap_state[];
+extern const char *const irlmp_state[];
+extern const char *const irlsap_state[];
void irlmp_watchdog_timer_expired(void *data);
void irlmp_discovery_timer_expired(void *data);
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
index 51b9a37..e9054a2 100644
--- a/include/net/iw_handler.h
+++ b/include/net/iw_handler.h
@@ -416,13 +416,13 @@
* data (i.e. valid as long as struct net_device exist, same locking rules).
*/
/* Forward declaration */
-struct ieee80211_device;
+struct libipw_device;
/* The struct */
struct iw_public_data {
/* Driver enhanced spy support */
struct iw_spy_data * spy_data;
- /* Structure managed by the in-kernel IEEE 802.11 layer */
- struct ieee80211_device * ieee80211;
+ /* Legacy structure managed by the ipw2x00-specific IEEE 802.11 layer */
+ struct libipw_device * libipw;
};
/**************************** PROTOTYPES ****************************/
@@ -443,7 +443,7 @@
extern void wireless_send_event(struct net_device * dev,
unsigned int cmd,
union iwreq_data * wrqu,
- char * extra);
+ const char * extra);
/* We may need a function to send a stream of events to user space.
* More on that later... */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c061044..466859b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -73,6 +73,21 @@
*/
/**
+ * DOC: mac80211 workqueue
+ *
+ * mac80211 provides its own workqueue for drivers and internal mac80211 use.
+ * The workqueue is a single threaded workqueue and can only be accessed by
+ * helpers for sanity checking. Drivers must ensure all work added onto the
+ * mac80211 workqueue should be cancelled on the driver stop() callback.
+ *
+ * mac80211 will flushed the workqueue upon interface removal and during
+ * suspend.
+ *
+ * All work performed on the mac80211 workqueue must not acquire the RTNL lock.
+ *
+ */
+
+/**
* enum ieee80211_max_queues - maximum number of queues
*
* @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
@@ -224,7 +239,14 @@
* @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
* @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
* @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
- * because the destination STA was in powersave mode.
+ * because the destination STA was in powersave mode. Note that to
+ * avoid race conditions, the filter must be set by the hardware or
+ * firmware upon receiving a frame that indicates that the station
+ * went to sleep (must be done on device to filter frames already on
+ * the queue) and may only be unset after mac80211 gives the OK for
+ * that by setting the IEEE80211_TX_CTL_CLEAR_PS_FILT (see above),
+ * since only then is it guaranteed that no more frames are in the
+ * hardware queue.
* @IEEE80211_TX_STAT_ACK: Frame was acknowledged
* @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status
* is for the whole aggregation.
@@ -241,6 +263,15 @@
* it can be sent out.
* @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
* used to indicate that a frame was already retried due to PS
+ * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
+ * used to indicate frame should not be encrypted
+ * @IEEE80211_TX_CTL_PSPOLL_RESPONSE: (internal?)
+ * This frame is a response to a PS-poll frame and should be sent
+ * although the station is in powersave mode.
+ * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
+ * transmit function after the current frame, this can be used
+ * by drivers to kick the DMA queue only if unset or when the
+ * queue gets full.
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
@@ -259,6 +290,9 @@
IEEE80211_TX_INTFL_RCALGO = BIT(13),
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
+ IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
+ IEEE80211_TX_CTL_PSPOLL_RESPONSE = BIT(17),
+ IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
};
/**
@@ -316,6 +350,21 @@
*
* When used for transmit status reporting, the driver should
* always report the rate along with the flags it used.
+ *
+ * &struct ieee80211_tx_info contains an array of these structs
+ * in the control information, and it will be filled by the rate
+ * control algorithm according to what should be sent. For example,
+ * if this array contains, in the format { <idx>, <count> } the
+ * information
+ * { 3, 2 }, { 2, 2 }, { 1, 4 }, { -1, 0 }, { -1, 0 }
+ * then this means that the frame should be transmitted
+ * up to twice at rate 3, up to twice at rate 2, and up to four
+ * times at rate 1 if it doesn't get acknowledged. Say it gets
+ * acknowledged by the peer after the fifth attempt, the status
+ * information should then contain
+ * { 3, 2 }, { 2, 2 }, { 1, 1 }, { -1, 0 } ...
+ * since it was transmitted twice at rate 3, twice at rate 2
+ * and once at rate 1 after which we received an acknowledgement.
*/
struct ieee80211_tx_rate {
s8 idx;
@@ -397,6 +446,11 @@
return (struct ieee80211_tx_info *)skb->cb;
}
+static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb)
+{
+ return (struct ieee80211_rx_status *)skb->cb;
+}
+
/**
* ieee80211_tx_info_clear_status - clear TX status
*
@@ -478,7 +532,7 @@
*
* The low-level driver should provide this information (the subset
* supported by hardware) to the 802.11 code with each received
- * frame.
+ * frame, in the skb's control buffer (cb).
*
* @mactime: value in microseconds of the 64-bit Time Synchronization Function
* (TSF) timer when the first data symbol (MPDU) arrived at the hardware.
@@ -529,7 +583,6 @@
/**
* enum ieee80211_conf_changed - denotes which configuration changed
*
- * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
@@ -539,7 +592,6 @@
* @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
*/
enum ieee80211_conf_changed {
- _IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
@@ -549,14 +601,6 @@
IEEE80211_CONF_CHANGE_IDLE = BIT(8),
};
-static inline __deprecated enum ieee80211_conf_changed
-__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void)
-{
- return _IEEE80211_CONF_CHANGE_RADIO_ENABLED;
-}
-#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \
- __IEEE80211_CONF_CHANGE_RADIO_ENABLED()
-
/**
* struct ieee80211_conf - configuration of the device
*
@@ -564,9 +608,6 @@
*
* @flags: configuration flags defined above
*
- * @radio_enabled: when zero, driver is required to switch off the radio.
- * @beacon_int: DEPRECATED, DO NOT USE
- *
* @listen_interval: listen interval in units of beacon interval
* @max_sleep_period: the maximum number of beacon intervals to sleep for
* before checking the beacon for a TIM bit (managed mode only); this
@@ -590,13 +631,11 @@
* number of transmissions not the number of retries
*/
struct ieee80211_conf {
- int __deprecated beacon_int;
u32 flags;
int power_level, dynamic_ps_timeout;
int max_sleep_period;
u16 listen_interval;
- bool __deprecated radio_enabled;
u8 long_frame_max_tx_count, short_frame_max_tx_count;
@@ -901,12 +940,6 @@
*
* @conf: &struct ieee80211_conf, device configuration, don't use.
*
- * @workqueue: single threaded workqueue available for driver use,
- * allocated by mac80211 on registration and flushed when an
- * interface is removed.
- * NOTICE: All work performed on this workqueue must not
- * acquire the RTNL lock.
- *
* @priv: pointer to private area that was allocated for driver use
* along with this structure.
*
@@ -942,7 +975,6 @@
struct ieee80211_hw {
struct ieee80211_conf conf;
struct wiphy *wiphy;
- struct workqueue_struct *workqueue;
const char *rate_control_algorithm;
void *priv;
u32 flags;
@@ -1172,10 +1204,13 @@
* the driver's configure_filter() function which frames should be
* passed to mac80211 and which should be filtered out.
*
- * The configure_filter() callback is invoked with the parameters
- * @mc_count and @mc_list for the combined multicast address list
- * of all virtual interfaces, @changed_flags telling which flags
- * were changed and @total_flags with the new flag states.
+ * Before configure_filter() is invoked, the prepare_multicast()
+ * callback is invoked with the parameters @mc_count and @mc_list
+ * for the combined multicast address list of all virtual interfaces.
+ * It's use is optional, and it returns a u64 that is passed to
+ * configure_filter(). Additionally, configure_filter() has the
+ * arguments @changed_flags telling which flags were changed and
+ * @total_flags with the new flag states.
*
* If your device has no multicast address filters your driver will
* need to check both the %FIF_ALLMULTI flag and the @mc_count
@@ -1224,10 +1259,13 @@
* mac80211 needs to do and the amount of CPU wakeups, so you should
* honour this flag if possible.
*
- * @FIF_CONTROL: pass control frames, if PROMISC_IN_BSS is not set then
- * only those addressed to this station
+ * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS
+ * is not set then only those addressed to this station.
*
* @FIF_OTHER_BSS: pass frames destined to other BSSes
+ *
+ * @FIF_PSPOLL: pass PS Poll frames, if PROMISC_IN_BSS is not set then only
+ * those addressed to this station.
*/
enum ieee80211_filter_flags {
FIF_PROMISC_IN_BSS = 1<<0,
@@ -1237,6 +1275,7 @@
FIF_BCN_PRBRESP_PROMISC = 1<<4,
FIF_CONTROL = 1<<5,
FIF_OTHER_BSS = 1<<6,
+ FIF_PSPOLL = 1<<7,
};
/**
@@ -1289,7 +1328,8 @@
* is disabled. This should turn off the hardware (at least
* it must turn off frame reception.)
* May be called right after add_interface if that rejects
- * an interface.
+ * an interface. If you added any work onto the mac80211 workqueue
+ * you should ensure to cancel it on this callback.
* Must be implemented.
*
* @add_interface: Called when a netdevice attached to the hardware is
@@ -1323,9 +1363,13 @@
* for association indication. The @changed parameter indicates which
* of the bss parameters has changed when a call is made.
*
+ * @prepare_multicast: Prepare for multicast filter configuration.
+ * This callback is optional, and its return value is passed
+ * to configure_filter(). This callback must be atomic.
+ *
* @configure_filter: Configure the device's RX filter.
* See the section "Frame filtering" for more information.
- * This callback must be implemented and atomic.
+ * This callback must be implemented.
*
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
@@ -1411,6 +1455,8 @@
* @rfkill_poll: Poll rfkill hardware state. If you need this, you also
* need to set wiphy->rfkill_poll to %true before registration,
* and need to call wiphy_rfkill_set_hw_state() in the callback.
+ *
+ * @testmode_cmd: Implement a cfg80211 test mode command.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1425,10 +1471,12 @@
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed);
+ u64 (*prepare_multicast)(struct ieee80211_hw *hw,
+ int mc_count, struct dev_addr_list *mc_list);
void (*configure_filter)(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mc_list);
+ u64 multicast);
int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -1461,6 +1509,9 @@
struct ieee80211_sta *sta, u16 tid, u16 *ssn);
void (*rfkill_poll)(struct ieee80211_hw *hw);
+#ifdef CONFIG_NL80211_TESTMODE
+ int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+#endif
};
/**
@@ -1606,10 +1657,6 @@
*/
void ieee80211_restart_hw(struct ieee80211_hw *hw);
-/* trick to avoid symbol clashes with the ieee80211 subsystem */
-void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_rx_status *status);
-
/**
* ieee80211_rx - receive frame
*
@@ -1624,14 +1671,8 @@
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
- * @status: status of this frame; the status pointer need not be valid
- * after this function returns
*/
-static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_rx_status *status)
-{
- __ieee80211_rx(hw, skb, status);
-}
+void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
/**
* ieee80211_rx_irqsafe - receive frame
@@ -1644,13 +1685,8 @@
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
- * @status: status of this frame; the status pointer need not be valid
- * after this function returns and is not freed by mac80211,
- * it is recommended that it points to a stack area
*/
-void ieee80211_rx_irqsafe(struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ieee80211_rx_status *status);
+void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
/**
* ieee80211_tx_status - transmit status callback
@@ -1917,6 +1953,31 @@
void *data);
/**
+ * ieee80211_queue_work - add work onto the mac80211 workqueue
+ *
+ * Drivers and mac80211 use this to add work onto the mac80211 workqueue.
+ * This helper ensures drivers are not queueing work when they should not be.
+ *
+ * @hw: the hardware struct for the interface we are adding work for
+ * @work: the work we want to add onto the mac80211 workqueue
+ */
+void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work);
+
+/**
+ * ieee80211_queue_delayed_work - add work onto the mac80211 workqueue
+ *
+ * Drivers and mac80211 use this to queue delayed work onto the mac80211
+ * workqueue.
+ *
+ * @hw: the hardware struct for the interface we are adding work for
+ * @dwork: delayable work to queue onto the mac80211 workqueue
+ * @delay: number of jiffies to wait before queueing
+ */
+void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
+ struct delayed_work *dwork,
+ unsigned long delay);
+
+/**
* ieee80211_start_tx_ba_session - Start a tx Block Ack session.
* @hw: pointer as obtained from ieee80211_alloc_hw().
* @ra: receiver address of the BA session recipient
@@ -2090,6 +2151,29 @@
return (sta == NULL || sta->supp_rates[band] & BIT(index));
}
+/**
+ * rate_control_send_low - helper for drivers for management/no-ack frames
+ *
+ * Rate control algorithms that agree to use the lowest rate to
+ * send management frames and NO_ACK data with the respective hw
+ * retries should use this in the beginning of their mac80211 get_rate
+ * callback. If true is returned the rate control can simply return.
+ * If false is returned we guarantee that sta and sta and priv_sta is
+ * not null.
+ *
+ * Rate control algorithms wishing to do more intelligent selection of
+ * rate for multicast/broadcast frames may choose to not use this.
+ *
+ * @sta: &struct ieee80211_sta pointer to the target destination. Note
+ * that this may be null.
+ * @priv_sta: private rate control structure. This may be null.
+ * @txrc: rate control information we sholud populate for mac80211.
+ */
+bool rate_control_send_low(struct ieee80211_sta *sta,
+ void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc);
+
+
static inline s8
rate_lowest_index(struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta)
@@ -2106,6 +2190,17 @@
return 0;
}
+static inline
+bool rate_usable_index_exists(struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta)
+{
+ unsigned int i;
+
+ for (i = 0; i < sband->n_bitrates; i++)
+ if (rate_supported(sta, sband->band, i))
+ return true;
+ return false;
+}
int ieee80211_rate_control_register(struct rate_control_ops *ops);
void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index d8d790e..3817fda 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/sysctl.h>
+#include <linux/workqueue.h>
#include <net/rtnetlink.h>
/*
@@ -117,7 +118,7 @@
int (*output)(struct sk_buff *skb);
struct sk_buff_head arp_queue;
struct timer_list timer;
- struct neigh_ops *ops;
+ const struct neigh_ops *ops;
u8 primary_key[0];
};
@@ -167,7 +168,7 @@
int gc_thresh2;
int gc_thresh3;
unsigned long last_flush;
- struct timer_list gc_timer;
+ struct delayed_work gc_work;
struct timer_list proxy_timer;
struct sk_buff_head proxy_queue;
atomic_t entries;
@@ -178,7 +179,6 @@
struct neighbour **hash_buckets;
unsigned int hash_mask;
__u32 hash_rnd;
- unsigned int hash_chain_gc;
struct pneigh_entry **phash_buckets;
};
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index ded434b..a120284 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -26,6 +26,7 @@
struct sock;
struct ctl_table_header;
struct net_generic;
+struct sock;
struct net {
atomic_t count; /* To decided when the network
@@ -57,6 +58,7 @@
spinlock_t rules_mod_lock;
struct sock *rtnl; /* rtnetlink socket */
+ struct sock *genl_sock;
struct netns_core core;
struct netns_mib mib;
@@ -78,6 +80,9 @@
#ifdef CONFIG_XFRM
struct netns_xfrm xfrm;
#endif
+#ifdef CONFIG_WIRELESS_EXT
+ struct sk_buff_head wext_nlevents;
+#endif
struct net_generic *gen;
};
@@ -106,6 +111,8 @@
extern struct list_head net_namespace_list;
+extern struct net *get_net_ns_by_pid(pid_t pid);
+
#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
@@ -208,6 +215,9 @@
#define for_each_net(VAR) \
list_for_each_entry(VAR, &net_namespace_list, list)
+#define for_each_net_rcu(VAR) \
+ list_for_each_entry_rcu(VAR, &net_namespace_list, list)
+
#ifdef CONFIG_NET_NS
#define __net_init
#define __net_exit
@@ -229,13 +239,15 @@
* needs per network namespace operations use device pernet operations,
* otherwise use pernet subsys operations.
*
- * This is critically important. Most of the network code cleanup
- * runs with the assumption that dev_remove_pack has been called so no
- * new packets will arrive during and after the cleanup functions have
- * been called. dev_remove_pack is not per namespace so instead the
- * guarantee of no more packets arriving in a network namespace is
- * provided by ensuring that all network devices and all sockets have
- * left the network namespace before the cleanup methods are called.
+ * Network interfaces need to be removed from a dying netns _before_
+ * subsys notifiers can be called, as most of the network code cleanup
+ * (which is done from subsys notifiers) runs with the assumption that
+ * dev_remove_pack has been called so no new packets will arrive during
+ * and after the cleanup functions have been called. dev_remove_pack
+ * is not per namespace so instead the guarantee of no more packets
+ * arriving in a network namespace is provided by ensuring that all
+ * network devices and all sockets have left the network namespace
+ * before the cleanup methods are called.
*
* For the longest time the ipv4 icmp code was registered as a pernet
* device which caused kernel oops, and panics during network
diff --git a/include/net/netfilter/nf_nat_core.h b/include/net/netfilter/nf_nat_core.h
index 5868406..33602ab 100644
--- a/include/net/netfilter/nf_nat_core.h
+++ b/include/net/netfilter/nf_nat_core.h
@@ -31,6 +31,6 @@
extern int
(*nfnetlink_parse_nat_setup_hook)(struct nf_conn *ct,
enum nf_nat_manip_type manip,
- struct nlattr *attr);
+ const struct nlattr *attr);
#endif /* _NF_NAT_CORE_H */
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 007bdb0..a63b219 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -365,7 +365,7 @@
*
* See nla_parse()
*/
-static inline int nlmsg_parse(struct nlmsghdr *nlh, int hdrlen,
+static inline int nlmsg_parse(const struct nlmsghdr *nlh, int hdrlen,
struct nlattr *tb[], int maxtype,
const struct nla_policy *policy)
{
@@ -414,7 +414,7 @@
*
* Returns 1 if a report back to the application is requested.
*/
-static inline int nlmsg_report(struct nlmsghdr *nlh)
+static inline int nlmsg_report(const struct nlmsghdr *nlh)
{
return !!(nlh->nlmsg_flags & NLM_F_ECHO);
}
diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
index afab4e4..dfeb2d7 100644
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -6,6 +6,7 @@
#ifndef __NETNS_IPV6_H__
#define __NETNS_IPV6_H__
+#include <net/dst_ops.h>
struct ctl_table_header;
@@ -42,7 +43,7 @@
struct timer_list ip6_fib_timer;
struct hlist_head *fib_table_hash;
struct fib6_table *fib6_main_tbl;
- struct dst_ops *ip6_dst_ops;
+ struct dst_ops ip6_dst_ops;
unsigned int ip6_rt_gc_expire;
unsigned long ip6_rt_last_gc;
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
diff --git a/include/net/netns/x_tables.h b/include/net/netns/x_tables.h
index 9554a64..591db7d 100644
--- a/include/net/netns/x_tables.h
+++ b/include/net/netns/x_tables.h
@@ -8,8 +8,11 @@
struct netns_xt {
struct list_head tables[NFPROTO_NUMPROTO];
+#if defined(CONFIG_BRIDGE_NF_EBTABLES) || \
+ defined(CONFIG_BRIDGE_NF_EBTABLES_MODULE)
struct ebt_table *broute_table;
struct ebt_table *frame_filter;
struct ebt_table *frame_nat;
+#endif
};
#endif
diff --git a/include/net/nl802154.h b/include/net/nl802154.h
new file mode 100644
index 0000000..99d2ba1
--- /dev/null
+++ b/include/net/nl802154.h
@@ -0,0 +1,126 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef IEEE802154_NL_H
+#define IEEE802154_NL_H
+
+struct net_device;
+struct ieee802154_addr;
+
+/**
+ * ieee802154_nl_assoc_indic - Notify userland of an association request.
+ * @dev: The network device on which this association request was
+ * received.
+ * @addr: The address of the device requesting association.
+ * @cap: The capability information field from the device.
+ *
+ * This informs a userland coordinator of a device requesting to
+ * associate with the PAN controlled by the coordinator.
+ *
+ * Note: This is in section 7.3.1 of the IEEE 802.15.4-2006 document.
+ */
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+ struct ieee802154_addr *addr, u8 cap);
+
+/**
+ * ieee802154_nl_assoc_confirm - Notify userland of association.
+ * @dev: The device which has completed association.
+ * @short_addr: The short address assigned to the device.
+ * @status: The status of the association.
+ *
+ * Inform userland of the result of an association request. If the
+ * association request included asking the coordinator to allocate
+ * a short address then it is returned in @short_addr.
+ *
+ * Note: This is in section 7.3.2 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_assoc_confirm(struct net_device *dev,
+ u16 short_addr, u8 status);
+
+/**
+ * ieee802154_nl_disassoc_indic - Notify userland of disassociation.
+ * @dev: The device on which disassociation was indicated.
+ * @addr: The device which is disassociating.
+ * @reason: The reason for the disassociation.
+ *
+ * Inform userland that a device has disassociated from the network.
+ *
+ * Note: This is in section 7.3.3 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+ struct ieee802154_addr *addr, u8 reason);
+
+/**
+ * ieee802154_nl_disassoc_confirm - Notify userland of disassociation
+ * completion.
+ * @dev: The device on which disassociation was ordered.
+ * @status: The result of the disassociation.
+ *
+ * Inform userland of the result of requesting that a device
+ * disassociate, or the result of requesting that we disassociate from
+ * a PAN managed by another coordinator.
+ *
+ * Note: This is in section 7.1.4.3 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_disassoc_confirm(struct net_device *dev,
+ u8 status);
+
+/**
+ * ieee802154_nl_scan_confirm - Notify userland of completion of scan.
+ * @dev: The device which was instructed to scan.
+ * @status: The status of the scan operation.
+ * @scan_type: What type of scan was performed.
+ * @unscanned: Any channels that the device was unable to scan.
+ * @edl: The energy levels (if a passive scan).
+ *
+ *
+ * Note: This is in section 7.1.11 of the IEEE 802.15.4 document.
+ * Note: This API does not permit the return of an active scan result.
+ */
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+ u8 status, u8 scan_type, u32 unscanned, u8 page,
+ u8 *edl/*, struct list_head *pan_desc_list */);
+
+/**
+ * ieee802154_nl_beacon_indic - Notify userland of a received beacon.
+ * @dev: The device on which a beacon was received.
+ * @panid: The PAN of the coordinator.
+ * @coord_addr: The short address of the coordinator on that PAN.
+ *
+ * Note: This is in section 7.1.5 of the IEEE 802.15.4 document.
+ * Note: This API does not provide extended information such as what
+ * channel the PAN is on or what the LQI of the beacon frame was on
+ * receipt.
+ * Note: This API cannot indicate a beacon frame for a coordinator
+ * operating in long addressing mode.
+ */
+int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid,
+ u16 coord_addr);
+
+/**
+ * ieee802154_nl_start_confirm - Notify userland of completion of start.
+ * @dev: The device which was instructed to scan.
+ * @status: The status of the scan operation.
+ *
+ * Note: This is in section 7.1.14 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_start_confirm(struct net_device *dev, u8 status);
+
+#endif
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 29d1267..44c923c 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -49,4 +49,6 @@
#define PN_NO_ADDR 0xff
+extern const struct file_operations pn_sock_seq_fops;
+
#endif
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 82a3191..f911ec75 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -87,6 +87,9 @@
extern void qdisc_put_rtab(struct qdisc_rate_table *tab);
extern void qdisc_put_stab(struct qdisc_size_table *tab);
extern void qdisc_warn_nonwc(char *txt, struct Qdisc *qdisc);
+extern int sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q,
+ struct net_device *dev, struct netdev_queue *txq,
+ spinlock_t *root_lock);
extern void __qdisc_run(struct Qdisc *q);
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
index 3c1895e..c3aa044d 100644
--- a/include/net/rtnetlink.h
+++ b/include/net/rtnetlink.h
@@ -14,7 +14,7 @@
extern int rtnl_unregister(int protocol, int msgtype);
extern void rtnl_unregister_all(int protocol);
-static inline int rtnl_msg_family(struct nlmsghdr *nlh)
+static inline int rtnl_msg_family(const struct nlmsghdr *nlh)
{
if (nlmsg_len(nlh) >= sizeof(struct rtgenmsg))
return ((struct rtgenmsg *) nlmsg_data(nlh))->rtgen_family;
@@ -70,6 +70,9 @@
size_t (*get_xstats_size)(const struct net_device *dev);
int (*fill_xstats)(struct sk_buff *skb,
const struct net_device *dev);
+ int (*get_tx_queues)(struct net *net, struct nlattr *tb[],
+ unsigned int *tx_queues,
+ unsigned int *real_tx_queues);
};
extern int __rtnl_link_register(struct rtnl_link_ops *ops);
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 5482e95..88eb9de 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -45,6 +45,8 @@
#define TCQ_F_BUILTIN 1
#define TCQ_F_THROTTLED 2
#define TCQ_F_INGRESS 4
+#define TCQ_F_CAN_BYPASS 8
+#define TCQ_F_MQROOT 16
#define TCQ_F_WARN_NONWC (1 << 16)
int padded;
struct Qdisc_ops *ops;
@@ -79,6 +81,7 @@
struct Qdisc_class_ops
{
/* Child qdisc manipulation */
+ unsigned int (*select_queue)(struct Qdisc *, struct tcmsg *);
int (*graft)(struct Qdisc *, unsigned long cl,
struct Qdisc *, struct Qdisc **);
struct Qdisc * (*leaf)(struct Qdisc *, unsigned long cl);
@@ -121,6 +124,7 @@
void (*reset)(struct Qdisc *);
void (*destroy)(struct Qdisc *);
int (*change)(struct Qdisc *, struct nlattr *arg);
+ void (*attach)(struct Qdisc *);
int (*dump)(struct Qdisc *, struct sk_buff *);
int (*dump_stats)(struct Qdisc *, struct gnet_dump *);
@@ -182,6 +186,11 @@
char data[];
};
+static inline int qdisc_qlen(struct Qdisc *q)
+{
+ return q->q.qlen;
+}
+
static inline struct qdisc_skb_cb *qdisc_skb_cb(struct sk_buff *skb)
{
return (struct qdisc_skb_cb *)skb->cb;
@@ -249,6 +258,8 @@
extern struct Qdisc noop_qdisc;
extern struct Qdisc_ops noop_qdisc_ops;
+extern struct Qdisc_ops pfifo_fast_ops;
+extern struct Qdisc_ops mq_qdisc_ops;
struct Qdisc_class_common
{
@@ -296,6 +307,8 @@
extern void dev_shutdown(struct net_device *dev);
extern void dev_activate(struct net_device *dev);
extern void dev_deactivate(struct net_device *dev);
+extern struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
+ struct Qdisc *qdisc);
extern void qdisc_reset(struct Qdisc *qdisc);
extern void qdisc_destroy(struct Qdisc *qdisc);
extern void qdisc_tree_decrease_qlen(struct Qdisc *qdisc, unsigned int n);
@@ -387,13 +400,18 @@
return qdisc_enqueue(skb, sch) & NET_XMIT_MASK;
}
+static inline void __qdisc_update_bstats(struct Qdisc *sch, unsigned int len)
+{
+ sch->bstats.bytes += len;
+ sch->bstats.packets++;
+}
+
static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff_head *list)
{
__skb_queue_tail(list, skb);
sch->qstats.backlog += qdisc_pkt_len(skb);
- sch->bstats.bytes += qdisc_pkt_len(skb);
- sch->bstats.packets++;
+ __qdisc_update_bstats(sch, qdisc_pkt_len(skb));
return NET_XMIT_SUCCESS;
}
diff --git a/include/net/scm.h b/include/net/scm.h
index f45bb6e..cf48c80 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -26,7 +26,6 @@
#ifdef CONFIG_SECURITY_NETWORK
u32 secid; /* Passed security ID */
#endif
- unsigned long seq; /* Connection seqno */
};
extern void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm);
@@ -59,7 +58,6 @@
scm->creds.gid = current_gid();
scm->creds.pid = task_tgid_vnr(p);
scm->fp = NULL;
- scm->seq = 0;
unix_get_peersec_dgram(sock, scm);
if (msg->msg_controllen <= 0)
return 0;
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 3b96680..8be5135 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -106,6 +106,7 @@
SCTP_CMD_ASSOC_SHKEY, /* generate the association shared keys */
SCTP_CMD_T1_RETRAN, /* Mark for retransmission after T1 timeout */
SCTP_CMD_UPDATE_INITTAG, /* Update peer inittag */
+ SCTP_CMD_SEND_MSG, /* Send the whole use message */
SCTP_CMD_LAST
} sctp_verb_t;
@@ -139,6 +140,7 @@
struct sctp_ulpevent *ulpevent;
struct sctp_packet *packet;
sctp_sackhdr_t *sackh;
+ struct sctp_datamsg *msg;
} sctp_arg_t;
/* We are simulating ML type constructors here.
@@ -188,6 +190,7 @@
SCTP_ARG_CONSTRUCTOR(ULPEVENT, struct sctp_ulpevent *, ulpevent)
SCTP_ARG_CONSTRUCTOR(PACKET, struct sctp_packet *, packet)
SCTP_ARG_CONSTRUCTOR(SACKH, sctp_sackhdr_t *, sackh)
+SCTP_ARG_CONSTRUCTOR(DATAMSG, struct sctp_datamsg *, msg)
typedef struct {
sctp_arg_t obj;
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index b05b055..58f714a 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -231,7 +231,7 @@
SCTP_SS_LISTENING = TCP_LISTEN,
SCTP_SS_ESTABLISHING = TCP_SYN_SENT,
SCTP_SS_ESTABLISHED = TCP_ESTABLISHED,
- SCTP_SS_DISCONNECTING = TCP_CLOSING,
+ SCTP_SS_CLOSING = TCP_CLOSING,
} sctp_sock_state_t;
/* These functions map various type to printable names. */
@@ -241,7 +241,9 @@
const char *sctp_pname(const sctp_subtype_t); /* primitives */
/* This is a table of printable names of sctp_state_t's. */
-extern const char *sctp_state_tbl[], *sctp_evttype_tbl[], *sctp_status_tbl[];
+extern const char *const sctp_state_tbl[];
+extern const char *const sctp_evttype_tbl[];
+extern const char *const sctp_status_tbl[];
/* Maximum chunk length considering padding requirements. */
enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) };
@@ -361,6 +363,13 @@
SCTP_SCOPE_UNUSABLE, /* IPv4 unusable addresses */
} sctp_scope_t;
+typedef enum {
+ SCTP_SCOPE_POLICY_DISABLE, /* Disable IPv4 address scoping */
+ SCTP_SCOPE_POLICY_ENABLE, /* Enable IPv4 address scoping */
+ SCTP_SCOPE_POLICY_PRIVATE, /* Follow draft but allow IPv4 private addresses */
+ SCTP_SCOPE_POLICY_LINK, /* Follow draft but allow IPv4 link local addresses */
+} sctp_scope_policy_t;
+
/* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>,
* SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 198.18.0.0/24,
* 192.88.99.0/24.
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index d16a304..8a6d529 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -486,15 +486,16 @@
}
/* Break down data chunks at this point. */
-static inline int sctp_frag_point(const struct sctp_sock *sp, int pmtu)
+static inline int sctp_frag_point(const struct sctp_association *asoc, int pmtu)
{
+ struct sctp_sock *sp = sctp_sk(asoc->base.sk);
int frag = pmtu;
frag -= sp->pf->af->net_header_len;
frag -= sizeof(struct sctphdr) + sizeof(struct sctp_data_chunk);
- if (sp->user_frag)
- frag = min_t(int, frag, sp->user_frag);
+ if (asoc->user_frag)
+ frag = min_t(int, frag, asoc->user_frag);
frag = min_t(int, frag, SCTP_MAX_CHUNK_LEN);
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index edfcacf..42d00ce 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -219,6 +219,15 @@
/* Flag to idicate if SCTP-AUTH is enabled */
int auth_enable;
+ /*
+ * Policy to control SCTP IPv4 address scoping
+ * 0 - Disable IPv4 address scoping
+ * 1 - Enable IPv4 address scoping
+ * 2 - Selectively allow only IPv4 private addresses
+ * 3 - Selectively allow only IPv4 link local address
+ */
+ int ipv4_scope_policy;
+
/* Flag to indicate whether computing and verifying checksum
* is disabled. */
int checksum_disable;
@@ -252,6 +261,7 @@
#define sctp_port_hashtable (sctp_globals.port_hashtable)
#define sctp_local_addr_list (sctp_globals.local_addr_list)
#define sctp_local_addr_lock (sctp_globals.addr_list_lock)
+#define sctp_scope_policy (sctp_globals.ipv4_scope_policy)
#define sctp_addip_enable (sctp_globals.addip_enable)
#define sctp_addip_noauth (sctp_globals.addip_noauth_enable)
#define sctp_prsctp_enable (sctp_globals.prsctp_enable)
@@ -628,7 +638,7 @@
/* Chunks waiting to be submitted to lower layer. */
struct list_head chunks;
/* Chunks that have been transmitted. */
- struct list_head track;
+ size_t msg_size;
/* Reference counting. */
atomic_t refcnt;
/* When is this message no longer interesting to the peer? */
@@ -643,6 +653,7 @@
struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *,
struct sctp_sndrcvinfo *,
struct msghdr *, int len);
+void sctp_datamsg_free(struct sctp_datamsg *);
void sctp_datamsg_put(struct sctp_datamsg *);
void sctp_chunk_fail(struct sctp_chunk *, int error);
int sctp_chunk_abandoned(struct sctp_chunk *);
@@ -811,22 +822,12 @@
/* pointer to the auth chunk for this packet */
struct sctp_chunk *auth;
- /* This packet contains a COOKIE-ECHO chunk. */
- __u8 has_cookie_echo;
-
- /* This packet contains a SACK chunk. */
- __u8 has_sack;
-
- /* This packet contains an AUTH chunk */
- __u8 has_auth;
-
- /* This packet contains at least 1 DATA chunk */
- __u8 has_data;
-
- /* SCTP cannot fragment this packet. So let ip fragment it. */
- __u8 ipfragok;
-
- __u8 malloced;
+ u8 has_cookie_echo:1, /* This packet contains a COOKIE-ECHO chunk. */
+ has_sack:1, /* This packet contains a SACK chunk. */
+ has_auth:1, /* This packet contains an AUTH chunk */
+ has_data:1, /* This packet contains at least 1 DATA chunk */
+ ipfragok:1, /* So let ip fragment this packet */
+ malloced:1; /* Is it malloced? */
};
struct sctp_packet *sctp_packet_init(struct sctp_packet *,
@@ -1567,13 +1568,13 @@
__u32 sack_cnt;
/* These are capabilities which our peer advertised. */
- __u8 ecn_capable; /* Can peer do ECN? */
- __u8 ipv4_address; /* Peer understands IPv4 addresses? */
- __u8 ipv6_address; /* Peer understands IPv6 addresses? */
- __u8 hostname_address;/* Peer understands DNS addresses? */
- __u8 asconf_capable; /* Does peer support ADDIP? */
- __u8 prsctp_capable; /* Can peer do PR-SCTP? */
- __u8 auth_capable; /* Is peer doing SCTP-AUTH? */
+ __u8 ecn_capable:1, /* Can peer do ECN? */
+ ipv4_address:1, /* Peer understands IPv4 addresses? */
+ ipv6_address:1, /* Peer understands IPv6 addresses? */
+ hostname_address:1, /* Peer understands DNS addresses? */
+ asconf_capable:1, /* Does peer support ADDIP? */
+ prsctp_capable:1, /* Can peer do PR-SCTP? */
+ auth_capable:1; /* Is peer doing SCTP-AUTH? */
__u32 adaptation_ind; /* Adaptation Code point. */
@@ -1738,6 +1739,12 @@
*/
__u32 rwnd_over;
+ /* Keeps treack of rwnd pressure. This happens when we have
+ * a window, but not recevie buffer (i.e small packets). This one
+ * is releases slowly (1 PMTU at a time ).
+ */
+ __u32 rwnd_press;
+
/* This is the sndbuf size in use for the association.
* This corresponds to the sndbuf size for the association,
* as specified in the sk->sndbuf.
@@ -1756,6 +1763,7 @@
/* The message size at which SCTP fragmentation will occur. */
__u32 frag_point;
+ __u32 user_frag;
/* Counter used to count INIT errors. */
int init_err_counter;
@@ -1905,11 +1913,8 @@
__u16 active_key_id;
- /* Need to send an ECNE Chunk? */
- char need_ecne;
-
- /* Is it a temporary association? */
- char temp;
+ __u8 need_ecne:1, /* Need to send an ECNE Chunk? */
+ temp:1; /* Is it a temporary association? */
};
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 1580c04..be2334a 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -210,12 +210,6 @@
};
-typedef union {
- __u8 raw;
- struct sctp_initmsg init;
- struct sctp_sndrcvinfo sndrcv;
-} sctp_cmsg_data_t;
-
/* These are cmsg_types. */
typedef enum sctp_cmsg_type {
SCTP_INIT, /* 5.2.1 SCTP Initiation Structure */
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 88af843..b71a446 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -469,6 +469,7 @@
int nonagle);
extern int tcp_may_send_now(struct sock *sk);
extern int tcp_retransmit_skb(struct sock *, struct sk_buff *);
+extern void tcp_retransmit_timer(struct sock *sk);
extern void tcp_xmit_retransmit_queue(struct sock *);
extern void tcp_simple_retransmit(struct sock *);
extern int tcp_trim_head(struct sock *, struct sk_buff *, u32);
@@ -521,6 +522,17 @@
extern int tcp_mss_to_mtu(struct sock *sk, int mss);
extern void tcp_mtup_init(struct sock *sk);
+static inline void tcp_bound_rto(const struct sock *sk)
+{
+ if (inet_csk(sk)->icsk_rto > TCP_RTO_MAX)
+ inet_csk(sk)->icsk_rto = TCP_RTO_MAX;
+}
+
+static inline u32 __tcp_set_rto(const struct tcp_sock *tp)
+{
+ return (tp->srtt >> 3) + tp->rttvar;
+}
+
static inline void __tcp_fast_path_on(struct tcp_sock *tp, u32 snd_wnd)
{
tp->pred_flags = htonl((tp->tcp_header_len << 26) |
@@ -1007,6 +1019,11 @@
return tp->keepalive_time ? : sysctl_tcp_keepalive_time;
}
+static inline int keepalive_probes(const struct tcp_sock *tp)
+{
+ return tp->keepalive_probes ? : sysctl_tcp_keepalive_probes;
+}
+
static inline int tcp_fin_time(const struct sock *sk)
{
int fin_timeout = tcp_sk(sk)->linger2 ? : sysctl_tcp_fin_timeout;
@@ -1169,7 +1186,7 @@
#define tcp_twsk_md5_key(twsk) NULL
#endif
-extern struct tcp_md5sig_pool **tcp_alloc_md5sig_pool(void);
+extern struct tcp_md5sig_pool **tcp_alloc_md5sig_pool(struct sock *);
extern void tcp_free_md5sig_pool(void);
extern struct tcp_md5sig_pool *__tcp_get_md5sig_pool(int cpu);
@@ -1235,6 +1252,29 @@
#define tcp_for_write_queue_from_safe(skb, tmp, sk) \
skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp)
+/* This function calculates a "timeout" which is equivalent to the timeout of a
+ * TCP connection after "boundary" unsucessful, exponentially backed-off
+ * retransmissions with an initial RTO of TCP_RTO_MIN.
+ */
+static inline bool retransmits_timed_out(const struct sock *sk,
+ unsigned int boundary)
+{
+ unsigned int timeout, linear_backoff_thresh;
+
+ if (!inet_csk(sk)->icsk_retransmits)
+ return false;
+
+ linear_backoff_thresh = ilog2(TCP_RTO_MAX/TCP_RTO_MIN);
+
+ if (boundary <= linear_backoff_thresh)
+ timeout = ((2 << boundary) - 1) * TCP_RTO_MIN;
+ else
+ timeout = ((2 << linear_backoff_thresh) - 1) * TCP_RTO_MIN +
+ (boundary - linear_backoff_thresh) * TCP_RTO_MAX;
+
+ return (tcp_time_stamp - tcp_sk(sk)->retrans_stamp) >= timeout;
+}
+
static inline struct sk_buff *tcp_send_head(struct sock *sk)
{
return sk->sk_send_head;
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index bfb240c..d65381c 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -51,7 +51,7 @@
/*
* address family specific functions
*/
-extern struct inet_connection_sock_af_ops ipv4_specific;
+extern const struct inet_connection_sock_af_ops ipv4_specific;
extern void inet6_destroy_sock(struct sock *sk);
diff --git a/include/net/udp.h b/include/net/udp.h
index 90e6ce5..5fb029f 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -207,4 +207,7 @@
#endif
extern void udp_init(void);
+
+extern int udp4_ufo_send_check(struct sk_buff *skb);
+extern struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb, int features);
#endif /* _UDP_H */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
new file mode 100644
index 0000000..547b1e2
--- /dev/null
+++ b/include/net/wpan-phy.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef WPAN_PHY_H
+#define WPAN_PHY_H
+
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+
+struct wpan_phy {
+ struct mutex pib_lock;
+
+ /*
+ * This is a PIB acording to 802.15.4-2006.
+ * We do not provide timing-related variables, as they
+ * aren't used outside of driver
+ */
+ u8 current_channel;
+ u8 current_page;
+ u32 channels_supported;
+ u8 transmit_power;
+ u8 cca_mode;
+
+ struct device dev;
+ int idx;
+
+ char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+struct wpan_phy *wpan_phy_alloc(size_t priv_size);
+int wpan_phy_register(struct device *parent, struct wpan_phy *phy);
+void wpan_phy_unregister(struct wpan_phy *phy);
+void wpan_phy_free(struct wpan_phy *phy);
+
+static inline void *wpan_phy_priv(struct wpan_phy *phy)
+{
+ BUG_ON(!phy);
+ return &phy->priv;
+}
+
+struct wpan_phy *wpan_phy_find(const char *str);
+static inline const char *wpan_phy_name(struct wpan_phy *phy)
+{
+ return dev_name(&phy->dev);
+}
+#endif
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 9e3a3f4..223e90a 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1280,7 +1280,7 @@
};
extern void xfrm_init(void);
-extern void xfrm4_init(void);
+extern void xfrm4_init(int rt_hash_size);
extern int xfrm_state_init(struct net *net);
extern void xfrm_state_fini(struct net *net);
extern void xfrm4_state_init(void);
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 251fc1c..3dae3f7 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -32,6 +32,9 @@
#include "control.h"
#include "info.h"
+/* maximum number of devices on the AC97 bus */
+#define AC97_BUS_MAX_DEVICES 4
+
/*
* AC'97 codec registers
*/
@@ -642,4 +645,10 @@
/* ad hoc AC97 device driver access */
extern struct bus_type ac97_bus_type;
+/* AC97 platform_data adding function */
+static inline void snd_ac97_dev_add_pdata(struct snd_ac97 *ac97, void *data)
+{
+ ac97->dev.platform_data = data;
+}
+
#endif /* __SOUND_AC97_CODEC_H */
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 82aed3f..1f57bb9 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -138,7 +138,7 @@
* *
*****************************************************************************/
-#define SNDRV_PCM_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 9)
+#define SNDRV_PCM_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 10)
typedef unsigned long snd_pcm_uframes_t;
typedef signed long snd_pcm_sframes_t;
diff --git a/include/sound/core.h b/include/sound/core.h
index 309cb96..a61499c 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -93,15 +93,6 @@
#define snd_device(n) list_entry(n, struct snd_device, list)
-/* monitor files for graceful shutdown (hotplug) */
-
-struct snd_monitor_file {
- struct file *file;
- const struct file_operations *disconnected_f_op;
- struct list_head shutdown_list; /* still need to shutdown */
- struct list_head list; /* link of monitor files */
-};
-
/* main structure for soundcard */
struct snd_card {
@@ -311,9 +302,7 @@
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);
-#ifndef snd_card_set_dev
#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
-#endif
/* device.c */
@@ -340,18 +329,17 @@
struct resource;
void release_and_free_resource(struct resource *res);
-#ifdef CONFIG_SND_VERBOSE_PRINTK
-void snd_verbose_printk(const char *file, int line, const char *format, ...)
- __attribute__ ((format (printf, 3, 4)));
-#endif
-#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK)
-void snd_verbose_printd(const char *file, int line, const char *format, ...)
- __attribute__ ((format (printf, 3, 4)));
-#endif
-
/* --- */
-#ifdef CONFIG_SND_VERBOSE_PRINTK
+#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+void __snd_printk(unsigned int level, const char *file, int line,
+ const char *format, ...)
+ __attribute__ ((format (printf, 4, 5)));
+#else
+#define __snd_printk(level, file, line, format, args...) \
+ printk(format, ##args)
+#endif
+
/**
* snd_printk - printk wrapper
* @fmt: format string
@@ -360,15 +348,9 @@
* when configured with CONFIG_SND_VERBOSE_PRINTK.
*/
#define snd_printk(fmt, args...) \
- snd_verbose_printk(__FILE__, __LINE__, fmt ,##args)
-#else
-#define snd_printk(fmt, args...) \
- printk(fmt ,##args)
-#endif
+ __snd_printk(0, __FILE__, __LINE__, fmt, ##args)
#ifdef CONFIG_SND_DEBUG
-
-#ifdef CONFIG_SND_VERBOSE_PRINTK
/**
* snd_printd - debug printk
* @fmt: format string
@@ -377,11 +359,7 @@
* Ignored when CONFIG_SND_DEBUG is not set.
*/
#define snd_printd(fmt, args...) \
- snd_verbose_printd(__FILE__, __LINE__, fmt ,##args)
-#else
-#define snd_printd(fmt, args...) \
- printk(fmt ,##args)
-#endif
+ __snd_printk(1, __FILE__, __LINE__, fmt, ##args)
/**
* snd_BUG - give a BUG warning message and stack trace
@@ -428,9 +406,10 @@
* Works like snd_printk() for debugging purposes.
* Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
*/
-#define snd_printdd(format, args...) snd_printk(format, ##args)
+#define snd_printdd(format, args...) \
+ __snd_printk(2, __FILE__, __LINE__, format, ##args)
#else
-#define snd_printdd(format, args...) /* nothing */
+#define snd_printdd(format, args...) do { } while (0)
#endif
@@ -438,12 +417,10 @@
/* for easier backward-porting */
#if defined(CONFIG_GAMEPORT) || defined(CONFIG_GAMEPORT_MODULE)
-#ifndef gameport_set_dev_parent
#define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
#define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
#define gameport_get_port_data(gp) (gp)->port_data
#endif
-#endif
/* PCI quirk list helper */
struct snd_pci_quirk {
diff --git a/include/sound/info.h b/include/sound/info.h
index 7c2ee1a2..112e894 100644
--- a/include/sound/info.h
+++ b/include/sound/info.h
@@ -110,13 +110,13 @@
static inline void snd_card_info_read_oss(struct snd_info_buffer *buffer) {}
#endif
-int snd_iprintf(struct snd_info_buffer *buffer, char *fmt, ...) \
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...) \
__attribute__ ((format (printf, 2, 3)));
int snd_info_init(void);
int snd_info_done(void);
int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len);
-char *snd_info_get_str(char *dest, char *src, int len);
+const char *snd_info_get_str(char *dest, const char *src, int len);
struct snd_info_entry *snd_info_create_module_entry(struct module *module,
const char *name,
struct snd_info_entry *parent);
diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h
index 7ccce94..c425062 100644
--- a/include/sound/memalloc.h
+++ b/include/sound/memalloc.h
@@ -47,7 +47,11 @@
#define SNDRV_DMA_TYPE_UNKNOWN 0 /* not defined */
#define SNDRV_DMA_TYPE_CONTINUOUS 1 /* continuous no-DMA memory */
#define SNDRV_DMA_TYPE_DEV 2 /* generic device continuous */
+#ifdef CONFIG_SND_DMA_SGBUF
#define SNDRV_DMA_TYPE_DEV_SG 3 /* generic device SG-buffer */
+#else
+#define SNDRV_DMA_TYPE_DEV_SG SNDRV_DMA_TYPE_DEV /* no SG-buf support */
+#endif
/*
* info for buffer allocation
@@ -60,6 +64,7 @@
void *private_data; /* private for allocator; don't touch */
};
+#ifdef CONFIG_SND_DMA_SGBUF
/*
* Scatter-Gather generic device pages
*/
@@ -107,6 +112,7 @@
{
return sgbuf->table[offset >> PAGE_SHIFT].buf + offset % PAGE_SIZE;
}
+#endif /* CONFIG_SND_DMA_SGBUF */
/* allocate/release a buffer */
int snd_dma_alloc_pages(int type, struct device *dev, size_t size,
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 2389352..de6d981 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -902,6 +902,7 @@
int snd_pcm_lib_malloc_pages(struct snd_pcm_substream *substream, size_t size);
int snd_pcm_lib_free_pages(struct snd_pcm_substream *substream);
+#ifdef CONFIG_SND_DMA_SGBUF
/*
* SG-buffer handling
*/
@@ -927,6 +928,28 @@
unsigned int snd_pcm_sgbuf_get_chunk_size(struct snd_pcm_substream *substream,
unsigned int ofs, unsigned int size);
+#else /* !SND_DMA_SGBUF */
+/*
+ * fake using a continuous buffer
+ */
+static inline dma_addr_t
+snd_pcm_sgbuf_get_addr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+ return substream->runtime->dma_addr + ofs;
+}
+
+static inline void *
+snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+ return substream->runtime->dma_area + ofs;
+}
+
+#define snd_pcm_sgbuf_ops_page NULL
+
+#define snd_pcm_sgbuf_get_chunk_size(subs, ofs, size) (size)
+
+#endif /* SND_DMA_SGBUF */
+
/* handle mmap counter - PCM mmap callback should handle this counter properly */
static inline void snd_pcm_mmap_data_open(struct vm_area_struct *area)
{
@@ -965,4 +988,6 @@
#define PCM_RUNTIME_CHECK(sub) snd_BUG_ON(!(sub) || !(sub)->runtime)
+const char *snd_pcm_format_name(snd_pcm_format_t format);
+
#endif /* __SOUND_PCM_H */
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
new file mode 100644
index 0000000..c022736
--- /dev/null
+++ b/include/sound/sh_fsi.h
@@ -0,0 +1,83 @@
+#ifndef __SOUND_FSI_H
+#define __SOUND_FSI_H
+
+/*
+ * Fifo-attached Serial Interface (FSI) support for SH7724
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* flags format
+
+ * 0xABCDEEFF
+ *
+ * A: channel size for TDM (input)
+ * B: channel size for TDM (ooutput)
+ * C: inversion
+ * D: mode
+ * E: input format
+ * F: output format
+ */
+
+#include <linux/clk.h>
+#include <sound/soc.h>
+
+/* TDM channel */
+#define SH_FSI_SET_CH_I(x) ((x & 0xF) << 28)
+#define SH_FSI_SET_CH_O(x) ((x & 0xF) << 24)
+
+#define SH_FSI_CH_IMASK 0xF0000000
+#define SH_FSI_CH_OMASK 0x0F000000
+#define SH_FSI_GET_CH_I(x) ((x & SH_FSI_CH_IMASK) >> 28)
+#define SH_FSI_GET_CH_O(x) ((x & SH_FSI_CH_OMASK) >> 24)
+
+/* clock inversion */
+#define SH_FSI_INVERSION_MASK 0x00F00000
+#define SH_FSI_LRM_INV (1 << 20)
+#define SH_FSI_BRM_INV (1 << 21)
+#define SH_FSI_LRS_INV (1 << 22)
+#define SH_FSI_BRS_INV (1 << 23)
+
+/* mode */
+#define SH_FSI_MODE_MASK 0x000F0000
+#define SH_FSI_IN_SLAVE_MODE (1 << 16) /* default master mode */
+#define SH_FSI_OUT_SLAVE_MODE (1 << 17) /* default master mode */
+
+/* DI format */
+#define SH_FSI_FMT_MASK 0x000000FF
+#define SH_FSI_IFMT(x) (((SH_FSI_FMT_ ## x) & SH_FSI_FMT_MASK) << 8)
+#define SH_FSI_OFMT(x) (((SH_FSI_FMT_ ## x) & SH_FSI_FMT_MASK) << 0)
+#define SH_FSI_GET_IFMT(x) ((x >> 8) & SH_FSI_FMT_MASK)
+#define SH_FSI_GET_OFMT(x) ((x >> 0) & SH_FSI_FMT_MASK)
+
+#define SH_FSI_FMT_MONO (1 << 0)
+#define SH_FSI_FMT_MONO_DELAY (1 << 1)
+#define SH_FSI_FMT_PCM (1 << 2)
+#define SH_FSI_FMT_I2S (1 << 3)
+#define SH_FSI_FMT_TDM (1 << 4)
+#define SH_FSI_FMT_TDM_DELAY (1 << 5)
+
+#define SH_FSI_IFMT_TDM_CH(x) \
+ (SH_FSI_IFMT(TDM) | SH_FSI_SET_CH_I(x))
+#define SH_FSI_IFMT_TDM_DELAY_CH(x) \
+ (SH_FSI_IFMT(TDM_DELAY) | SH_FSI_SET_CH_I(x))
+
+#define SH_FSI_OFMT_TDM_CH(x) \
+ (SH_FSI_OFMT(TDM) | SH_FSI_SET_CH_O(x))
+#define SH_FSI_OFMT_TDM_DELAY_CH(x) \
+ (SH_FSI_OFMT(TDM_DELAY) | SH_FSI_SET_CH_O(x))
+
+struct sh_fsi_platform_info {
+ unsigned long porta_flags;
+ unsigned long portb_flags;
+};
+
+extern struct snd_soc_dai fsi_soc_dai[2];
+extern struct snd_soc_platform fsi_soc_platform;
+
+#endif /* __SOUND_FSI_H */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 352d7ee..97ca9af 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -27,8 +27,8 @@
#define SND_SOC_DAIFMT_I2S 0 /* I2S mode */
#define SND_SOC_DAIFMT_RIGHT_J 1 /* Right Justified mode */
#define SND_SOC_DAIFMT_LEFT_J 2 /* Left Justified mode */
-#define SND_SOC_DAIFMT_DSP_A 3 /* L data msb after FRM LRC */
-#define SND_SOC_DAIFMT_DSP_B 4 /* L data msb during FRM LRC */
+#define SND_SOC_DAIFMT_DSP_A 3 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B 4 /* L data MSB during FRM LRC */
#define SND_SOC_DAIFMT_AC97 5 /* AC97 */
/* left and right justified also known as MSB and LSB respectively */
@@ -38,7 +38,7 @@
/*
* DAI Clock gating.
*
- * DAI bit clocks can be be gated (disabled) when not the DAI is not
+ * DAI bit clocks can be be gated (disabled) when the DAI is not
* sending or receiving PCM data in a frame. This can be used to save power.
*/
#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */
@@ -51,21 +51,21 @@
* format.
*/
#define SND_SOC_DAIFMT_NB_NF (0 << 8) /* normal bit clock + frame */
-#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal bclk + inv frm */
-#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert bclk + nor frm */
-#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert bclk + frm */
+#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert BCLK + FRM */
/*
* DAI hardware clock masters.
*
* This is wrt the codec, the inverse is true for the interface
- * i.e. if the codec is clk and frm master then the interface is
+ * i.e. if the codec is clk and FRM master then the interface is
* clk and frame slave.
*/
-#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & frm master */
-#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & frm master */
+#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & FRM master */
#define SND_SOC_DAIFMT_CBM_CFS (2 << 12) /* codec clk master & frame slave */
-#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & frm slave */
+#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & FRM slave */
#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
@@ -78,7 +78,13 @@
#define SND_SOC_CLOCK_IN 0
#define SND_SOC_CLOCK_OUT 1
-#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S16_LE |\
+#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S8 |\
+ SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S16_BE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S20_3BE |\
+ SNDRV_PCM_FMTBIT_S24_3LE |\
+ SNDRV_PCM_FMTBIT_S24_3BE |\
SNDRV_PCM_FMTBIT_S32_LE |\
SNDRV_PCM_FMTBIT_S32_BE)
@@ -106,7 +112,7 @@
int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots);
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width);
int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
@@ -116,12 +122,12 @@
/*
* Digital Audio Interface.
*
- * Describes the Digital Audio Interface in terms of it's ALSA, DAI and AC97
- * operations an capabilities. Codec and platfom drivers will register a this
+ * Describes the Digital Audio Interface in terms of its ALSA, DAI and AC97
+ * operations and capabilities. Codec and platform drivers will register this
* structure for every DAI they have.
*
* This structure covers the clocking, formating and ALSA operations for each
- * interface a
+ * interface.
*/
struct snd_soc_dai_ops {
/*
@@ -140,7 +146,8 @@
*/
int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
int (*set_tdm_slot)(struct snd_soc_dai *dai,
- unsigned int mask, int slots);
+ unsigned int tx_mask, unsigned int rx_mask,
+ int slots, int slot_width);
int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
/*
@@ -179,6 +186,7 @@
int ac97_control;
struct device *dev;
+ void *ac97_pdata; /* platform_data for the ac97 codec */
/* DAI callbacks */
int (*probe)(struct platform_device *pdev,
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index ec8a45f..c1410e3 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -137,6 +137,12 @@
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
/* stream domain */
+#define SND_SOC_DAPM_AIF_IN(wname, stname, wslot, wreg, wshift, winvert) \
+{ .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \
+ .reg = wreg, .shift = wshift, .invert = winvert }
+#define SND_SOC_DAPM_AIF_OUT(wname, stname, wslot, wreg, wshift, winvert) \
+{ .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \
+ .reg = wreg, .shift = wshift, .invert = winvert }
#define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert}
@@ -279,9 +285,11 @@
/* dapm events */
int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream,
int event);
+void snd_soc_dapm_shutdown(struct snd_soc_device *socdev);
/* dapm sys fs - used by the core */
int snd_soc_dapm_sys_add(struct device *dev);
+void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec);
/* dapm audio pin control and status */
int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin);
@@ -311,6 +319,8 @@
snd_soc_dapm_pre, /* machine specific pre widget - exec first */
snd_soc_dapm_post, /* machine specific post widget - exec last */
snd_soc_dapm_supply, /* power/clock supply */
+ snd_soc_dapm_aif_in, /* audio interface input */
+ snd_soc_dapm_aif_out, /* audio interface output */
};
/*
diff --git a/include/sound/soc.h b/include/sound/soc.h
index cf6111d..475cb7e 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -135,6 +135,28 @@
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+ xhandler_get, xhandler_put, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = xreg, .shift = shift_left, .rshift = shift_right, \
+ .max = xmax, .invert = xinvert} }
+#define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
+ xhandler_get, xhandler_put, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw_2r, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .max = xmax, .invert = xinvert} }
#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_bool_ext, \
@@ -183,14 +205,28 @@
#endif
typedef int (*hw_write_t)(void *,const char* ,int);
-typedef int (*hw_read_t)(void *,char* ,int);
extern struct snd_ac97_bus_ops soc_ac97_ops;
+enum snd_soc_control_type {
+ SND_SOC_CUSTOM,
+ SND_SOC_I2C,
+ SND_SOC_SPI,
+};
+
int snd_soc_register_platform(struct snd_soc_platform *platform);
void snd_soc_unregister_platform(struct snd_soc_platform *platform);
int snd_soc_register_codec(struct snd_soc_codec *codec);
void snd_soc_unregister_codec(struct snd_soc_codec *codec);
+int snd_soc_codec_volatile_register(struct snd_soc_codec *codec, int reg);
+int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+ int addr_bits, int data_bits,
+ enum snd_soc_control_type control);
+
+#ifdef CONFIG_PM
+int snd_soc_suspend_device(struct device *dev);
+int snd_soc_resume_device(struct device *dev);
+#endif
/* pcm <-> DAI connect */
void snd_soc_free_pcms(struct snd_soc_device *socdev);
@@ -216,9 +252,9 @@
/* codec register bit access */
int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value);
+ unsigned int mask, unsigned int value);
int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value);
+ unsigned int mask, unsigned int value);
int snd_soc_new_ac97_codec(struct snd_soc_codec *codec,
struct snd_ac97_bus_ops *ops, int num);
@@ -356,8 +392,10 @@
int (*write)(struct snd_soc_codec *, unsigned int, unsigned int);
int (*display_register)(struct snd_soc_codec *, char *,
size_t, unsigned int);
+ int (*volatile_register)(unsigned int);
+ int (*readable_register)(unsigned int);
hw_write_t hw_write;
- hw_read_t hw_read;
+ unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int);
void *reg_cache;
short reg_cache_size;
short reg_cache_step;
@@ -369,8 +407,6 @@
enum snd_soc_bias_level bias_level;
enum snd_soc_bias_level suspend_bias_level;
struct delayed_work delayed_work;
- struct list_head up_list;
- struct list_head down_list;
/* codec DAI's */
struct snd_soc_dai *dai;
@@ -379,6 +415,7 @@
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_reg;
struct dentry *debugfs_pop_time;
+ struct dentry *debugfs_dapm;
#endif
};
diff --git a/include/sound/tlv.h b/include/sound/tlv.h
index d136ea2..9fd5b19 100644
--- a/include/sound/tlv.h
+++ b/include/sound/tlv.h
@@ -35,6 +35,8 @@
#define SNDRV_CTL_TLVT_DB_SCALE 1 /* dB scale */
#define SNDRV_CTL_TLVT_DB_LINEAR 2 /* linear volume */
#define SNDRV_CTL_TLVT_DB_RANGE 3 /* dB range container */
+#define SNDRV_CTL_TLVT_DB_MINMAX 4 /* dB scale with min/max */
+#define SNDRV_CTL_TLVT_DB_MINMAX_MUTE 5 /* dB scale with min/max with mute */
#define TLV_DB_SCALE_ITEM(min, step, mute) \
SNDRV_CTL_TLVT_DB_SCALE, 2 * sizeof(unsigned int), \
@@ -42,6 +44,18 @@
#define DECLARE_TLV_DB_SCALE(name, min, step, mute) \
unsigned int name[] = { TLV_DB_SCALE_ITEM(min, step, mute) }
+/* dB scale specified with min/max values instead of step */
+#define TLV_DB_MINMAX_ITEM(min_dB, max_dB) \
+ SNDRV_CTL_TLVT_DB_MINMAX, 2 * sizeof(unsigned int), \
+ (min_dB), (max_dB)
+#define TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB) \
+ SNDRV_CTL_TLVT_DB_MINMAX_MUTE, 2 * sizeof(unsigned int), \
+ (min_dB), (max_dB)
+#define DECLARE_TLV_DB_MINMAX(name, min_dB, max_dB) \
+ unsigned int name[] = { TLV_DB_MINMAX_ITEM(min_dB, max_dB) }
+#define DECLARE_TLV_DB_MINMAX_MUTE(name, min_dB, max_dB) \
+ unsigned int name[] = { TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB) }
+
/* linear volume between min_dB and max_dB (.01dB unit) */
#define TLV_DB_LINEAR_ITEM(min_dB, max_dB) \
SNDRV_CTL_TLVT_DB_LINEAR, 2 * sizeof(unsigned int), \
diff --git a/include/sound/uda1380.h b/include/sound/uda1380.h
new file mode 100644
index 0000000..381319c
--- /dev/null
+++ b/include/sound/uda1380.h
@@ -0,0 +1,22 @@
+/*
+ * UDA1380 ALSA SoC Codec driver
+ *
+ * Copyright 2009 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UDA1380_H
+#define __UDA1380_H
+
+struct uda1380_platform_data {
+ int gpio_power;
+ int gpio_reset;
+ int dac_clk;
+#define UDA1380_DAC_CLK_SYSCLK 0
+#define UDA1380_DAC_CLK_WSPLL 1
+};
+
+#endif /* __UDA1380_H */
diff --git a/include/sound/version.h b/include/sound/version.h
index 456f135..2293914 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.20"
+#define CONFIG_SND_VERSION "1.0.21"
#define CONFIG_SND_DATE ""
diff --git a/include/sound/wm8993.h b/include/sound/wm8993.h
new file mode 100644
index 0000000..9c661f2
--- /dev/null
+++ b/include/sound/wm8993.h
@@ -0,0 +1,44 @@
+/*
+ * linux/sound/wm8993.h -- Platform data for WM8993
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8993_H
+#define __LINUX_SND_WM8993_H
+
+/* Note that EQ1 only contains the enable/disable bit so will be
+ ignored but is included for simplicity.
+ */
+struct wm8993_retune_mobile_setting {
+ const char *name;
+ unsigned int rate;
+ u16 config[24];
+};
+
+struct wm8993_platform_data {
+ struct wm8993_retune_mobile_setting *retune_configs;
+ int num_retune_configs;
+
+ /* LINEOUT can be differential or single ended */
+ unsigned int lineout1_diff:1;
+ unsigned int lineout2_diff:1;
+
+ /* Common mode feedback */
+ unsigned int lineout1fb:1;
+ unsigned int lineout2fb:1;
+
+ /* Microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+ unsigned int micbias1_lvl:1;
+ unsigned int micbias2_lvl:1;
+
+ /* Jack detect threashold levels, see datasheet for values */
+ unsigned int jd_scthr:2;
+ unsigned int jd_thr:2;
+};
+
+#endif
diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h
index 05ead66..444cd6b 100644
--- a/include/sound/ymfpci.h
+++ b/include/sound/ymfpci.h
@@ -331,6 +331,7 @@
struct snd_ac97 *ac97;
struct snd_rawmidi *rawmidi;
struct snd_timer *timer;
+ unsigned int timer_ticks;
struct pci_dev *pci;
struct snd_card *card;
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
index f7a7ae1..2a4b3bf 100644
--- a/include/trace/define_trace.h
+++ b/include/trace/define_trace.h
@@ -26,6 +26,11 @@
#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
DEFINE_TRACE(name)
+#undef TRACE_EVENT_FN
+#define TRACE_EVENT_FN(name, proto, args, tstruct, \
+ assign, print, reg, unreg) \
+ DEFINE_TRACE_FN(name, reg, unreg)
+
#undef DECLARE_TRACE
#define DECLARE_TRACE(name, proto, args) \
DEFINE_TRACE(name)
@@ -56,6 +61,8 @@
#include <trace/ftrace.h>
#endif
+#undef TRACE_EVENT
+#undef TRACE_EVENT_FN
#undef TRACE_HEADER_MULTI_READ
/* Only undef what we defined in this file */
diff --git a/include/trace/events/kvm.h b/include/trace/events/kvm.h
new file mode 100644
index 0000000..dbe1084
--- /dev/null
+++ b/include/trace/events/kvm.h
@@ -0,0 +1,151 @@
+#if !defined(_TRACE_KVM_MAIN_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_MAIN_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_FILE kvm
+
+#if defined(__KVM_HAVE_IOAPIC)
+TRACE_EVENT(kvm_set_irq,
+ TP_PROTO(unsigned int gsi, int level, int irq_source_id),
+ TP_ARGS(gsi, level, irq_source_id),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, gsi )
+ __field( int, level )
+ __field( int, irq_source_id )
+ ),
+
+ TP_fast_assign(
+ __entry->gsi = gsi;
+ __entry->level = level;
+ __entry->irq_source_id = irq_source_id;
+ ),
+
+ TP_printk("gsi %u level %d source %d",
+ __entry->gsi, __entry->level, __entry->irq_source_id)
+);
+
+#define kvm_deliver_mode \
+ {0x0, "Fixed"}, \
+ {0x1, "LowPrio"}, \
+ {0x2, "SMI"}, \
+ {0x3, "Res3"}, \
+ {0x4, "NMI"}, \
+ {0x5, "INIT"}, \
+ {0x6, "SIPI"}, \
+ {0x7, "ExtINT"}
+
+TRACE_EVENT(kvm_ioapic_set_irq,
+ TP_PROTO(__u64 e, int pin, bool coalesced),
+ TP_ARGS(e, pin, coalesced),
+
+ TP_STRUCT__entry(
+ __field( __u64, e )
+ __field( int, pin )
+ __field( bool, coalesced )
+ ),
+
+ TP_fast_assign(
+ __entry->e = e;
+ __entry->pin = pin;
+ __entry->coalesced = coalesced;
+ ),
+
+ TP_printk("pin %u dst %x vec=%u (%s|%s|%s%s)%s",
+ __entry->pin, (u8)(__entry->e >> 56), (u8)__entry->e,
+ __print_symbolic((__entry->e >> 8 & 0x7), kvm_deliver_mode),
+ (__entry->e & (1<<11)) ? "logical" : "physical",
+ (__entry->e & (1<<15)) ? "level" : "edge",
+ (__entry->e & (1<<16)) ? "|masked" : "",
+ __entry->coalesced ? " (coalesced)" : "")
+);
+
+TRACE_EVENT(kvm_msi_set_irq,
+ TP_PROTO(__u64 address, __u64 data),
+ TP_ARGS(address, data),
+
+ TP_STRUCT__entry(
+ __field( __u64, address )
+ __field( __u64, data )
+ ),
+
+ TP_fast_assign(
+ __entry->address = address;
+ __entry->data = data;
+ ),
+
+ TP_printk("dst %u vec %x (%s|%s|%s%s)",
+ (u8)(__entry->address >> 12), (u8)__entry->data,
+ __print_symbolic((__entry->data >> 8 & 0x7), kvm_deliver_mode),
+ (__entry->address & (1<<2)) ? "logical" : "physical",
+ (__entry->data & (1<<15)) ? "level" : "edge",
+ (__entry->address & (1<<3)) ? "|rh" : "")
+);
+
+#define kvm_irqchips \
+ {KVM_IRQCHIP_PIC_MASTER, "PIC master"}, \
+ {KVM_IRQCHIP_PIC_SLAVE, "PIC slave"}, \
+ {KVM_IRQCHIP_IOAPIC, "IOAPIC"}
+
+TRACE_EVENT(kvm_ack_irq,
+ TP_PROTO(unsigned int irqchip, unsigned int pin),
+ TP_ARGS(irqchip, pin),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, irqchip )
+ __field( unsigned int, pin )
+ ),
+
+ TP_fast_assign(
+ __entry->irqchip = irqchip;
+ __entry->pin = pin;
+ ),
+
+ TP_printk("irqchip %s pin %u",
+ __print_symbolic(__entry->irqchip, kvm_irqchips),
+ __entry->pin)
+);
+
+
+
+#endif /* defined(__KVM_HAVE_IOAPIC) */
+
+#define KVM_TRACE_MMIO_READ_UNSATISFIED 0
+#define KVM_TRACE_MMIO_READ 1
+#define KVM_TRACE_MMIO_WRITE 2
+
+#define kvm_trace_symbol_mmio \
+ { KVM_TRACE_MMIO_READ_UNSATISFIED, "unsatisfied-read" }, \
+ { KVM_TRACE_MMIO_READ, "read" }, \
+ { KVM_TRACE_MMIO_WRITE, "write" }
+
+TRACE_EVENT(kvm_mmio,
+ TP_PROTO(int type, int len, u64 gpa, u64 val),
+ TP_ARGS(type, len, gpa, val),
+
+ TP_STRUCT__entry(
+ __field( u32, type )
+ __field( u32, len )
+ __field( u64, gpa )
+ __field( u64, val )
+ ),
+
+ TP_fast_assign(
+ __entry->type = type;
+ __entry->len = len;
+ __entry->gpa = gpa;
+ __entry->val = val;
+ ),
+
+ TP_printk("mmio %s len %u gpa 0x%llx val 0x%llx",
+ __print_symbolic(__entry->type, kvm_trace_symbol_mmio),
+ __entry->len, __entry->gpa, __entry->val)
+);
+
+#endif /* _TRACE_KVM_MAIN_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/module.h b/include/trace/events/module.h
new file mode 100644
index 0000000..84160fb
--- /dev/null
+++ b/include/trace/events/module.h
@@ -0,0 +1,126 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM module
+
+#if !defined(_TRACE_MODULE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_MODULE_H
+
+#include <linux/tracepoint.h>
+
+#ifdef CONFIG_MODULES
+
+struct module;
+
+#define show_module_flags(flags) __print_flags(flags, "", \
+ { (1UL << TAINT_PROPRIETARY_MODULE), "P" }, \
+ { (1UL << TAINT_FORCED_MODULE), "F" }, \
+ { (1UL << TAINT_CRAP), "C" })
+
+TRACE_EVENT(module_load,
+
+ TP_PROTO(struct module *mod),
+
+ TP_ARGS(mod),
+
+ TP_STRUCT__entry(
+ __field( unsigned int, taints )
+ __string( name, mod->name )
+ ),
+
+ TP_fast_assign(
+ __entry->taints = mod->taints;
+ __assign_str(name, mod->name);
+ ),
+
+ TP_printk("%s %s", __get_str(name), show_module_flags(__entry->taints))
+);
+
+TRACE_EVENT(module_free,
+
+ TP_PROTO(struct module *mod),
+
+ TP_ARGS(mod),
+
+ TP_STRUCT__entry(
+ __string( name, mod->name )
+ ),
+
+ TP_fast_assign(
+ __assign_str(name, mod->name);
+ ),
+
+ TP_printk("%s", __get_str(name))
+);
+
+TRACE_EVENT(module_get,
+
+ TP_PROTO(struct module *mod, unsigned long ip, int refcnt),
+
+ TP_ARGS(mod, ip, refcnt),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, ip )
+ __field( int, refcnt )
+ __string( name, mod->name )
+ ),
+
+ TP_fast_assign(
+ __entry->ip = ip;
+ __entry->refcnt = refcnt;
+ __assign_str(name, mod->name);
+ ),
+
+ TP_printk("%s call_site=%pf refcnt=%d",
+ __get_str(name), (void *)__entry->ip, __entry->refcnt)
+);
+
+TRACE_EVENT(module_put,
+
+ TP_PROTO(struct module *mod, unsigned long ip, int refcnt),
+
+ TP_ARGS(mod, ip, refcnt),
+
+ TP_STRUCT__entry(
+ __field( unsigned long, ip )
+ __field( int, refcnt )
+ __string( name, mod->name )
+ ),
+
+ TP_fast_assign(
+ __entry->ip = ip;
+ __entry->refcnt = refcnt;
+ __assign_str(name, mod->name);
+ ),
+
+ TP_printk("%s call_site=%pf refcnt=%d",
+ __get_str(name), (void *)__entry->ip, __entry->refcnt)
+);
+
+TRACE_EVENT(module_request,
+
+ TP_PROTO(char *name, bool wait, unsigned long ip),
+
+ TP_ARGS(name, wait, ip),
+
+ TP_STRUCT__entry(
+ __field( bool, wait )
+ __field( unsigned long, ip )
+ __string( name, name )
+ ),
+
+ TP_fast_assign(
+ __entry->wait = wait;
+ __entry->ip = ip;
+ __assign_str(name, name);
+ ),
+
+ TP_printk("%s wait=%d call_site=%pf",
+ __get_str(name), (int)__entry->wait, (void *)__entry->ip)
+);
+
+#endif /* CONFIG_MODULES */
+
+#endif /* _TRACE_MODULE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
+
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 8949bb7..b48f1ad 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -94,6 +94,7 @@
__field( pid_t, pid )
__field( int, prio )
__field( int, success )
+ __field( int, cpu )
),
TP_fast_assign(
@@ -101,11 +102,12 @@
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->success = success;
+ __entry->cpu = task_cpu(p);
),
- TP_printk("task %s:%d [%d] success=%d",
+ TP_printk("task %s:%d [%d] success=%d [%03d]",
__entry->comm, __entry->pid, __entry->prio,
- __entry->success)
+ __entry->success, __entry->cpu)
);
/*
@@ -125,6 +127,7 @@
__field( pid_t, pid )
__field( int, prio )
__field( int, success )
+ __field( int, cpu )
),
TP_fast_assign(
@@ -132,11 +135,12 @@
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->success = success;
+ __entry->cpu = task_cpu(p);
),
- TP_printk("task %s:%d [%d] success=%d",
+ TP_printk("task %s:%d [%d] success=%d [%03d]",
__entry->comm, __entry->pid, __entry->prio,
- __entry->success)
+ __entry->success, __entry->cpu)
);
/*
@@ -340,6 +344,101 @@
__entry->sig, __entry->comm, __entry->pid)
);
+/*
+ * XXX the below sched_stat tracepoints only apply to SCHED_OTHER/BATCH/IDLE
+ * adding sched_stat support to SCHED_FIFO/RR would be welcome.
+ */
+
+/*
+ * Tracepoint for accounting wait time (time the task is runnable
+ * but not actually running due to scheduler contention).
+ */
+TRACE_EVENT(sched_stat_wait,
+
+ TP_PROTO(struct task_struct *tsk, u64 delay),
+
+ TP_ARGS(tsk, delay),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( u64, delay )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+ __entry->pid = tsk->pid;
+ __entry->delay = delay;
+ )
+ TP_perf_assign(
+ __perf_count(delay);
+ ),
+
+ TP_printk("task: %s:%d wait: %Lu [ns]",
+ __entry->comm, __entry->pid,
+ (unsigned long long)__entry->delay)
+);
+
+/*
+ * Tracepoint for accounting sleep time (time the task is not runnable,
+ * including iowait, see below).
+ */
+TRACE_EVENT(sched_stat_sleep,
+
+ TP_PROTO(struct task_struct *tsk, u64 delay),
+
+ TP_ARGS(tsk, delay),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( u64, delay )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+ __entry->pid = tsk->pid;
+ __entry->delay = delay;
+ )
+ TP_perf_assign(
+ __perf_count(delay);
+ ),
+
+ TP_printk("task: %s:%d sleep: %Lu [ns]",
+ __entry->comm, __entry->pid,
+ (unsigned long long)__entry->delay)
+);
+
+/*
+ * Tracepoint for accounting iowait time (time the task is not runnable
+ * due to waiting on IO to complete).
+ */
+TRACE_EVENT(sched_stat_iowait,
+
+ TP_PROTO(struct task_struct *tsk, u64 delay),
+
+ TP_ARGS(tsk, delay),
+
+ TP_STRUCT__entry(
+ __array( char, comm, TASK_COMM_LEN )
+ __field( pid_t, pid )
+ __field( u64, delay )
+ ),
+
+ TP_fast_assign(
+ memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+ __entry->pid = tsk->pid;
+ __entry->delay = delay;
+ )
+ TP_perf_assign(
+ __perf_count(delay);
+ ),
+
+ TP_printk("task: %s:%d iowait: %Lu [ns]",
+ __entry->comm, __entry->pid,
+ (unsigned long long)__entry->delay)
+);
+
#endif /* _TRACE_SCHED_H */
/* This part must be outside protection */
diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h
index e499863b..4b2be6d 100644
--- a/include/trace/events/skb.h
+++ b/include/trace/events/skb.h
@@ -5,6 +5,7 @@
#define _TRACE_SKB_H
#include <linux/skbuff.h>
+#include <linux/netdevice.h>
#include <linux/tracepoint.h>
/*
@@ -34,6 +35,25 @@
__entry->skbaddr, __entry->protocol, __entry->location)
);
+TRACE_EVENT(skb_copy_datagram_iovec,
+
+ TP_PROTO(const struct sk_buff *skb, int len),
+
+ TP_ARGS(skb, len),
+
+ TP_STRUCT__entry(
+ __field( const void *, skbaddr )
+ __field( int, len )
+ ),
+
+ TP_fast_assign(
+ __entry->skbaddr = skb;
+ __entry->len = len;
+ ),
+
+ TP_printk("skbaddr=%p len=%d", __entry->skbaddr, __entry->len)
+);
+
#endif /* _TRACE_SKB_H */
/* This part must be outside protection */
diff --git a/include/trace/events/syscalls.h b/include/trace/events/syscalls.h
new file mode 100644
index 0000000..397dff2
--- /dev/null
+++ b/include/trace/events/syscalls.h
@@ -0,0 +1,70 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM syscalls
+
+#if !defined(_TRACE_EVENTS_SYSCALLS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENTS_SYSCALLS_H
+
+#include <linux/tracepoint.h>
+
+#include <asm/ptrace.h>
+#include <asm/syscall.h>
+
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+
+extern void syscall_regfunc(void);
+extern void syscall_unregfunc(void);
+
+TRACE_EVENT_FN(sys_enter,
+
+ TP_PROTO(struct pt_regs *regs, long id),
+
+ TP_ARGS(regs, id),
+
+ TP_STRUCT__entry(
+ __field( long, id )
+ __array( unsigned long, args, 6 )
+ ),
+
+ TP_fast_assign(
+ __entry->id = id;
+ syscall_get_arguments(current, regs, 0, 6, __entry->args);
+ ),
+
+ TP_printk("NR %ld (%lx, %lx, %lx, %lx, %lx, %lx)",
+ __entry->id,
+ __entry->args[0], __entry->args[1], __entry->args[2],
+ __entry->args[3], __entry->args[4], __entry->args[5]),
+
+ syscall_regfunc, syscall_unregfunc
+);
+
+TRACE_EVENT_FN(sys_exit,
+
+ TP_PROTO(struct pt_regs *regs, long ret),
+
+ TP_ARGS(regs, ret),
+
+ TP_STRUCT__entry(
+ __field( long, id )
+ __field( long, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->id = syscall_get_nr(current, regs);
+ __entry->ret = ret;
+ ),
+
+ TP_printk("NR %ld = %ld",
+ __entry->id, __entry->ret),
+
+ syscall_regfunc, syscall_unregfunc
+);
+
+#endif /* CONFIG_HAVE_SYSCALL_TRACEPOINTS */
+
+#endif /* _TRACE_EVENTS_SYSCALLS_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
+
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index f64fbaa..308bafd 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -21,11 +21,14 @@
#undef __field
#define __field(type, item) type item;
+#undef __field_ext
+#define __field_ext(type, item, filter_type) type item;
+
#undef __array
#define __array(type, item, len) type item[len];
#undef __dynamic_array
-#define __dynamic_array(type, item, len) unsigned short __data_loc_##item;
+#define __dynamic_array(type, item, len) u32 __data_loc_##item;
#undef __string
#define __string(item, src) __dynamic_array(char, item, -1)
@@ -42,6 +45,16 @@
}; \
static struct ftrace_event_call event_##name
+#undef __cpparg
+#define __cpparg(arg...) arg
+
+/* Callbacks are meaningless to ftrace. */
+#undef TRACE_EVENT_FN
+#define TRACE_EVENT_FN(name, proto, args, tstruct, \
+ assign, print, reg, unreg) \
+ TRACE_EVENT(name, __cpparg(proto), __cpparg(args), \
+ __cpparg(tstruct), __cpparg(assign), __cpparg(print)) \
+
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
@@ -51,23 +64,27 @@
* Include the following:
*
* struct ftrace_data_offsets_<call> {
- * int <item1>;
- * int <item2>;
+ * u32 <item1>;
+ * u32 <item2>;
* [...]
* };
*
- * The __dynamic_array() macro will create each int <item>, this is
+ * The __dynamic_array() macro will create each u32 <item>, this is
* to keep the offset of each array from the beginning of the event.
+ * The size of an array is also encoded, in the higher 16 bits of <item>.
*/
#undef __field
-#define __field(type, item);
+#define __field(type, item)
+
+#undef __field_ext
+#define __field_ext(type, item, filter_type)
#undef __array
#define __array(type, item, len)
#undef __dynamic_array
-#define __dynamic_array(type, item, len) int item;
+#define __dynamic_array(type, item, len) u32 item;
#undef __string
#define __string(item, src) __dynamic_array(char, item, -1)
@@ -109,6 +126,9 @@
if (!ret) \
return 0;
+#undef __field_ext
+#define __field_ext(type, item, filter_type) __field(type, item)
+
#undef __array
#define __array(type, item, len) \
ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
@@ -120,7 +140,7 @@
#undef __dynamic_array
#define __dynamic_array(type, item, len) \
- ret = trace_seq_printf(s, "\tfield:__data_loc " #item ";\t" \
+ ret = trace_seq_printf(s, "\tfield:__data_loc " #type "[] " #item ";\t"\
"offset:%u;\tsize:%u;\n", \
(unsigned int)offsetof(typeof(field), \
__data_loc_##item), \
@@ -150,7 +170,8 @@
#undef TRACE_EVENT
#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
static int \
-ftrace_format_##call(struct trace_seq *s) \
+ftrace_format_##call(struct ftrace_event_call *unused, \
+ struct trace_seq *s) \
{ \
struct ftrace_raw_##call field __attribute__((unused)); \
int ret = 0; \
@@ -210,7 +231,7 @@
#undef __get_dynamic_array
#define __get_dynamic_array(field) \
- ((void *)__entry + __entry->__data_loc_##field)
+ ((void *)__entry + (__entry->__data_loc_##field & 0xffff))
#undef __get_str
#define __get_str(field) (char *)__get_dynamic_array(field)
@@ -263,28 +284,33 @@
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
-#undef __field
-#define __field(type, item) \
+#undef __field_ext
+#define __field_ext(type, item, filter_type) \
ret = trace_define_field(event_call, #type, #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), is_signed_type(type)); \
+ sizeof(field.item), \
+ is_signed_type(type), filter_type); \
if (ret) \
return ret;
+#undef __field
+#define __field(type, item) __field_ext(type, item, FILTER_OTHER)
+
#undef __array
#define __array(type, item, len) \
BUILD_BUG_ON(len > MAX_FILTER_STR_VAL); \
ret = trace_define_field(event_call, #type "[" #len "]", #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), 0); \
+ sizeof(field.item), 0, FILTER_OTHER); \
if (ret) \
return ret;
#undef __dynamic_array
#define __dynamic_array(type, item, len) \
- ret = trace_define_field(event_call, "__data_loc" "[" #type "]", #item,\
- offsetof(typeof(field), __data_loc_##item), \
- sizeof(field.__data_loc_##item), 0);
+ ret = trace_define_field(event_call, "__data_loc " #type "[]", #item, \
+ offsetof(typeof(field), __data_loc_##item), \
+ sizeof(field.__data_loc_##item), 0, \
+ FILTER_OTHER);
#undef __string
#define __string(item, src) __dynamic_array(char, item, -1)
@@ -292,17 +318,14 @@
#undef TRACE_EVENT
#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
int \
-ftrace_define_fields_##call(void) \
+ftrace_define_fields_##call(struct ftrace_event_call *event_call) \
{ \
struct ftrace_raw_##call field; \
- struct ftrace_event_call *event_call = &event_##call; \
int ret; \
\
- __common_field(int, type, 1); \
- __common_field(unsigned char, flags, 0); \
- __common_field(unsigned char, preempt_count, 0); \
- __common_field(int, pid, 1); \
- __common_field(int, tgid, 1); \
+ ret = trace_define_common_fields(event_call); \
+ if (ret) \
+ return ret; \
\
tstruct; \
\
@@ -321,6 +344,9 @@
#undef __field
#define __field(type, item)
+#undef __field_ext
+#define __field_ext(type, item, filter_type)
+
#undef __array
#define __array(type, item, len)
@@ -328,6 +354,7 @@
#define __dynamic_array(type, item, len) \
__data_offsets->item = __data_size + \
offsetof(typeof(*entry), __data); \
+ __data_offsets->item |= (len * sizeof(type)) << 16; \
__data_size += (len) * sizeof(type);
#undef __string
@@ -433,13 +460,15 @@
* {
* struct ring_buffer_event *event;
* struct ftrace_raw_<call> *entry; <-- defined in stage 1
+ * struct ring_buffer *buffer;
* unsigned long irq_flags;
* int pc;
*
* local_save_flags(irq_flags);
* pc = preempt_count();
*
- * event = trace_current_buffer_lock_reserve(event_<call>.id,
+ * event = trace_current_buffer_lock_reserve(&buffer,
+ * event_<call>.id,
* sizeof(struct ftrace_raw_<call>),
* irq_flags, pc);
* if (!event)
@@ -449,7 +478,7 @@
* <assign>; <-- Here we assign the entries by the __field and
* __array macros.
*
- * trace_current_buffer_unlock_commit(event, irq_flags, pc);
+ * trace_current_buffer_unlock_commit(buffer, event, irq_flags, pc);
* }
*
* static int ftrace_raw_reg_event_<call>(void)
@@ -541,6 +570,7 @@
struct ftrace_event_call *event_call = &event_##call; \
struct ring_buffer_event *event; \
struct ftrace_raw_##call *entry; \
+ struct ring_buffer *buffer; \
unsigned long irq_flags; \
int __data_size; \
int pc; \
@@ -550,7 +580,8 @@
\
__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
\
- event = trace_current_buffer_lock_reserve(event_##call.id, \
+ event = trace_current_buffer_lock_reserve(&buffer, \
+ event_##call.id, \
sizeof(*entry) + __data_size, \
irq_flags, pc); \
if (!event) \
@@ -562,11 +593,12 @@
\
{ assign; } \
\
- if (!filter_current_check_discard(event_call, entry, event)) \
- trace_nowake_buffer_unlock_commit(event, irq_flags, pc); \
+ if (!filter_current_check_discard(buffer, event_call, entry, event)) \
+ trace_nowake_buffer_unlock_commit(buffer, \
+ event, irq_flags, pc); \
} \
\
-static int ftrace_raw_reg_event_##call(void) \
+static int ftrace_raw_reg_event_##call(void *ptr) \
{ \
int ret; \
\
@@ -577,7 +609,7 @@
return ret; \
} \
\
-static void ftrace_raw_unreg_event_##call(void) \
+static void ftrace_raw_unreg_event_##call(void *ptr) \
{ \
unregister_trace_##call(ftrace_raw_event_##call); \
} \
@@ -595,7 +627,6 @@
return -ENODEV; \
event_##call.id = id; \
INIT_LIST_HEAD(&event_##call.fields); \
- init_preds(&event_##call); \
return 0; \
} \
\
diff --git a/include/trace/syscall.h b/include/trace/syscall.h
index 8cfe515..5dc283b 100644
--- a/include/trace/syscall.h
+++ b/include/trace/syscall.h
@@ -1,8 +1,13 @@
#ifndef _TRACE_SYSCALL_H
#define _TRACE_SYSCALL_H
+#include <linux/tracepoint.h>
+#include <linux/unistd.h>
+#include <linux/ftrace_event.h>
+
#include <asm/ptrace.h>
+
/*
* A syscall entry in the ftrace syscalls array.
*
@@ -10,26 +15,49 @@
* @nb_args: number of parameters it takes
* @types: list of types as strings
* @args: list of args as strings (args[i] matches types[i])
+ * @enter_id: associated ftrace enter event id
+ * @exit_id: associated ftrace exit event id
+ * @enter_event: associated syscall_enter trace event
+ * @exit_event: associated syscall_exit trace event
*/
struct syscall_metadata {
const char *name;
int nb_args;
const char **types;
const char **args;
+ int enter_id;
+ int exit_id;
+
+ struct ftrace_event_call *enter_event;
+ struct ftrace_event_call *exit_event;
};
#ifdef CONFIG_FTRACE_SYSCALLS
-extern void arch_init_ftrace_syscalls(void);
extern struct syscall_metadata *syscall_nr_to_meta(int nr);
-extern void start_ftrace_syscalls(void);
-extern void stop_ftrace_syscalls(void);
-extern void ftrace_syscall_enter(struct pt_regs *regs);
-extern void ftrace_syscall_exit(struct pt_regs *regs);
-#else
-static inline void start_ftrace_syscalls(void) { }
-static inline void stop_ftrace_syscalls(void) { }
-static inline void ftrace_syscall_enter(struct pt_regs *regs) { }
-static inline void ftrace_syscall_exit(struct pt_regs *regs) { }
+extern int syscall_name_to_nr(char *name);
+void set_syscall_enter_id(int num, int id);
+void set_syscall_exit_id(int num, int id);
+extern struct trace_event event_syscall_enter;
+extern struct trace_event event_syscall_exit;
+extern int reg_event_syscall_enter(void *ptr);
+extern void unreg_event_syscall_enter(void *ptr);
+extern int reg_event_syscall_exit(void *ptr);
+extern void unreg_event_syscall_exit(void *ptr);
+extern int syscall_enter_format(struct ftrace_event_call *call,
+ struct trace_seq *s);
+extern int syscall_exit_format(struct ftrace_event_call *call,
+ struct trace_seq *s);
+extern int syscall_enter_define_fields(struct ftrace_event_call *call);
+extern int syscall_exit_define_fields(struct ftrace_event_call *call);
+enum print_line_t print_syscall_enter(struct trace_iterator *iter, int flags);
+enum print_line_t print_syscall_exit(struct trace_iterator *iter, int flags);
+#endif
+#ifdef CONFIG_EVENT_PROFILE
+int reg_prof_syscall_enter(char *name);
+void unreg_prof_syscall_enter(char *name);
+int reg_prof_syscall_exit(char *name);
+void unreg_prof_syscall_exit(char *name);
+
#endif
#endif /* _TRACE_SYSCALL_H */
diff --git a/init/Kconfig b/init/Kconfig
index 3f7e609..8e8b76d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -316,38 +316,28 @@
prompt "RCU Implementation"
default TREE_RCU
-config CLASSIC_RCU
- bool "Classic RCU"
- help
- This option selects the classic RCU implementation that is
- designed for best read-side performance on non-realtime
- systems.
-
- Select this option if you are unsure.
-
config TREE_RCU
bool "Tree-based hierarchical RCU"
help
This option selects the RCU implementation that is
designed for very large SMP system with hundreds or
- thousands of CPUs.
+ thousands of CPUs. It also scales down nicely to
+ smaller systems.
-config PREEMPT_RCU
- bool "Preemptible RCU"
+config TREE_PREEMPT_RCU
+ bool "Preemptable tree-based hierarchical RCU"
depends on PREEMPT
help
- This option reduces the latency of the kernel by making certain
- RCU sections preemptible. Normally RCU code is non-preemptible, if
- this option is selected then read-only RCU sections become
- preemptible. This helps latency, but may expose bugs due to
- now-naive assumptions about each RCU read-side critical section
- remaining on a given CPU through its execution.
+ This option selects the RCU implementation that is
+ designed for very large SMP systems with hundreds or
+ thousands of CPUs, but for which real-time response
+ is also required.
endchoice
config RCU_TRACE
bool "Enable tracing for RCU"
- depends on TREE_RCU || PREEMPT_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
help
This option provides tracing in RCU which presents stats
in debugfs for debugging RCU implementation.
@@ -359,7 +349,7 @@
int "Tree-based hierarchical RCU fanout value"
range 2 64 if 64BIT
range 2 32 if !64BIT
- depends on TREE_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
default 64 if 64BIT
default 32 if !64BIT
help
@@ -374,7 +364,7 @@
config RCU_FANOUT_EXACT
bool "Disable tree-based hierarchical RCU auto-balancing"
- depends on TREE_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
default n
help
This option forces use of the exact RCU_FANOUT value specified,
@@ -387,18 +377,12 @@
Say N if unsure.
config TREE_RCU_TRACE
- def_bool RCU_TRACE && TREE_RCU
+ def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
select DEBUG_FS
help
- This option provides tracing for the TREE_RCU implementation,
- permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
- def_bool RCU_TRACE && PREEMPT_RCU
- select DEBUG_FS
- help
- This option provides tracing for the PREEMPT_RCU implementation,
- permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+ This option provides tracing for the TREE_RCU and
+ TREE_PREEMPT_RCU implementations, permitting Makefile to
+ trivially select kernel/rcutree_trace.c.
endmenu # "RCU Subsystem"
diff --git a/init/main.c b/init/main.c
index 2d9d6bd..b34fd8e 100644
--- a/init/main.c
+++ b/init/main.c
@@ -451,6 +451,7 @@
{
int pid;
+ rcu_scheduler_starting();
kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
numa_default_policy();
pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
@@ -462,7 +463,6 @@
* at least once to get things moving:
*/
init_idle_bootup_task(current);
- rcu_scheduler_starting();
preempt_enable_no_resched();
schedule();
preempt_disable();
@@ -631,7 +631,6 @@
softirq_init();
timekeeping_init();
time_init();
- sched_clock_init();
profile_init();
if (!irqs_disabled())
printk(KERN_CRIT "start_kernel(): bug: interrupts were "
@@ -682,6 +681,7 @@
numa_policy_init();
if (late_time_init)
late_time_init();
+ sched_clock_init();
calibrate_delay();
pidmap_init();
anon_vma_init();
@@ -733,13 +733,14 @@
int initcall_debug;
core_param(initcall_debug, initcall_debug, bool, 0644);
+static char msgbuf[64];
+static struct boot_trace_call call;
+static struct boot_trace_ret ret;
+
int do_one_initcall(initcall_t fn)
{
int count = preempt_count();
ktime_t calltime, delta, rettime;
- char msgbuf[64];
- struct boot_trace_call call;
- struct boot_trace_ret ret;
if (initcall_debug) {
call.caller = task_pid_nr(current);
diff --git a/ipc/shm.c b/ipc/shm.c
index 15dd238..30162a5 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -174,7 +174,7 @@
shm_unlock(shp);
if (!is_file_hugepages(shp->shm_file))
shmem_lock(shp->shm_file, 0, shp->mlock_user);
- else
+ else if (shp->mlock_user)
user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size,
shp->mlock_user);
fput (shp->shm_file);
@@ -369,8 +369,8 @@
/* hugetlb_file_setup applies strict accounting */
if (shmflg & SHM_NORESERVE)
acctflag = VM_NORESERVE;
- file = hugetlb_file_setup(name, size, acctflag);
- shp->mlock_user = current_user();
+ file = hugetlb_file_setup(name, size, acctflag,
+ &shp->mlock_user);
} else {
/*
* Do not allow no accounting for OVERCOMMIT_NEVER, even
@@ -410,6 +410,8 @@
return error;
no_id:
+ if (is_file_hugepages(file) && shp->mlock_user)
+ user_shm_unlock(size, shp->mlock_user);
fput(file);
no_file:
security_shm_free(shp);
diff --git a/kernel/Makefile b/kernel/Makefile
index 2093a69..b833bd5 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -80,11 +80,9 @@
obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
-obj-$(CONFIG_CLASSIC_RCU) += rcuclassic.o
obj-$(CONFIG_TREE_RCU) += rcutree.o
-obj-$(CONFIG_PREEMPT_RCU) += rcupreempt.o
+obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o
obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o
-obj-$(CONFIG_PREEMPT_RCU_TRACE) += rcupreempt_trace.o
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
diff --git a/kernel/acct.c b/kernel/acct.c
index 9f33910..9a4715a 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -491,13 +491,17 @@
u64 run_time;
struct timespec uptime;
struct tty_struct *tty;
+ const struct cred *orig_cred;
+
+ /* Perform file operations on behalf of whoever enabled accounting */
+ orig_cred = override_creds(file->f_cred);
/*
* First check to see if there is enough free_space to continue
* the process accounting system.
*/
if (!check_free_space(acct, file))
- return;
+ goto out;
/*
* Fill the accounting struct with the needed info as recorded
@@ -578,6 +582,8 @@
sizeof(acct_t), &file->f_pos);
current->signal->rlim[RLIMIT_FSIZE].rlim_cur = flim;
set_fs(fs);
+out:
+ revert_creds(orig_cred);
}
/**
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index b6eadfe3..c7ece8f 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -600,6 +600,7 @@
static struct file_operations proc_cgroupstats_operations;
static struct backing_dev_info cgroup_backing_dev_info = {
+ .name = "cgroup",
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
diff --git a/kernel/cred.c b/kernel/cred.c
index 1bb4d7e..006fcab 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -18,6 +18,18 @@
#include <linux/cn_proc.h>
#include "cred-internals.h"
+#if 0
+#define kdebug(FMT, ...) \
+ printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void no_printk(const char *fmt, ...)
+{
+}
+#define kdebug(FMT, ...) \
+ no_printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
+#endif
+
static struct kmem_cache *cred_jar;
/*
@@ -36,6 +48,10 @@
*/
struct cred init_cred = {
.usage = ATOMIC_INIT(4),
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ .subscribers = ATOMIC_INIT(2),
+ .magic = CRED_MAGIC,
+#endif
.securebits = SECUREBITS_DEFAULT,
.cap_inheritable = CAP_INIT_INH_SET,
.cap_permitted = CAP_FULL_SET,
@@ -48,6 +64,31 @@
#endif
};
+static inline void set_cred_subscribers(struct cred *cred, int n)
+{
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ atomic_set(&cred->subscribers, n);
+#endif
+}
+
+static inline int read_cred_subscribers(const struct cred *cred)
+{
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ return atomic_read(&cred->subscribers);
+#else
+ return 0;
+#endif
+}
+
+static inline void alter_cred_subscribers(const struct cred *_cred, int n)
+{
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ struct cred *cred = (struct cred *) _cred;
+
+ atomic_add(n, &cred->subscribers);
+#endif
+}
+
/*
* Dispose of the shared task group credentials
*/
@@ -85,9 +126,22 @@
{
struct cred *cred = container_of(rcu, struct cred, rcu);
+ kdebug("put_cred_rcu(%p)", cred);
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ if (cred->magic != CRED_MAGIC_DEAD ||
+ atomic_read(&cred->usage) != 0 ||
+ read_cred_subscribers(cred) != 0)
+ panic("CRED: put_cred_rcu() sees %p with"
+ " mag %x, put %p, usage %d, subscr %d\n",
+ cred, cred->magic, cred->put_addr,
+ atomic_read(&cred->usage),
+ read_cred_subscribers(cred));
+#else
if (atomic_read(&cred->usage) != 0)
panic("CRED: put_cred_rcu() sees %p with usage %d\n",
cred, atomic_read(&cred->usage));
+#endif
security_cred_free(cred);
key_put(cred->thread_keyring);
@@ -106,12 +160,90 @@
*/
void __put_cred(struct cred *cred)
{
+ kdebug("__put_cred(%p{%d,%d})", cred,
+ atomic_read(&cred->usage),
+ read_cred_subscribers(cred));
+
BUG_ON(atomic_read(&cred->usage) != 0);
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ BUG_ON(read_cred_subscribers(cred) != 0);
+ cred->magic = CRED_MAGIC_DEAD;
+ cred->put_addr = __builtin_return_address(0);
+#endif
+ BUG_ON(cred == current->cred);
+ BUG_ON(cred == current->real_cred);
call_rcu(&cred->rcu, put_cred_rcu);
}
EXPORT_SYMBOL(__put_cred);
+/*
+ * Clean up a task's credentials when it exits
+ */
+void exit_creds(struct task_struct *tsk)
+{
+ struct cred *cred;
+
+ kdebug("exit_creds(%u,%p,%p,{%d,%d})", tsk->pid, tsk->real_cred, tsk->cred,
+ atomic_read(&tsk->cred->usage),
+ read_cred_subscribers(tsk->cred));
+
+ cred = (struct cred *) tsk->real_cred;
+ tsk->real_cred = NULL;
+ validate_creds(cred);
+ alter_cred_subscribers(cred, -1);
+ put_cred(cred);
+
+ cred = (struct cred *) tsk->cred;
+ tsk->cred = NULL;
+ validate_creds(cred);
+ alter_cred_subscribers(cred, -1);
+ put_cred(cred);
+
+ cred = (struct cred *) tsk->replacement_session_keyring;
+ if (cred) {
+ tsk->replacement_session_keyring = NULL;
+ validate_creds(cred);
+ put_cred(cred);
+ }
+}
+
+/*
+ * Allocate blank credentials, such that the credentials can be filled in at a
+ * later date without risk of ENOMEM.
+ */
+struct cred *cred_alloc_blank(void)
+{
+ struct cred *new;
+
+ new = kmem_cache_zalloc(cred_jar, GFP_KERNEL);
+ if (!new)
+ return NULL;
+
+#ifdef CONFIG_KEYS
+ new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL);
+ if (!new->tgcred) {
+ kfree(new);
+ return NULL;
+ }
+ atomic_set(&new->tgcred->usage, 1);
+#endif
+
+ atomic_set(&new->usage, 1);
+
+ if (security_cred_alloc_blank(new, GFP_KERNEL) < 0)
+ goto error;
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ new->magic = CRED_MAGIC;
+#endif
+ return new;
+
+error:
+ abort_creds(new);
+ return NULL;
+}
+
/**
* prepare_creds - Prepare a new set of credentials for modification
*
@@ -132,16 +264,19 @@
const struct cred *old;
struct cred *new;
- BUG_ON(atomic_read(&task->real_cred->usage) < 1);
+ validate_process_creds();
new = kmem_cache_alloc(cred_jar, GFP_KERNEL);
if (!new)
return NULL;
+ kdebug("prepare_creds() alloc %p", new);
+
old = task->cred;
memcpy(new, old, sizeof(struct cred));
atomic_set(&new->usage, 1);
+ set_cred_subscribers(new, 0);
get_group_info(new->group_info);
get_uid(new->user);
@@ -157,6 +292,7 @@
if (security_prepare_creds(new, old, GFP_KERNEL) < 0)
goto error;
+ validate_creds(new);
return new;
error:
@@ -229,9 +365,12 @@
if (!new)
return NULL;
+ kdebug("prepare_usermodehelper_creds() alloc %p", new);
+
memcpy(new, &init_cred, sizeof(struct cred));
atomic_set(&new->usage, 1);
+ set_cred_subscribers(new, 0);
get_group_info(new->group_info);
get_uid(new->user);
@@ -250,6 +389,7 @@
#endif
if (security_prepare_creds(new, &init_cred, GFP_ATOMIC) < 0)
goto error;
+ validate_creds(new);
BUG_ON(atomic_read(&new->usage) != 1);
return new;
@@ -286,6 +426,10 @@
) {
p->real_cred = get_cred(p->cred);
get_cred(p->cred);
+ alter_cred_subscribers(p->cred, 2);
+ kdebug("share_creds(%p{%d,%d})",
+ p->cred, atomic_read(&p->cred->usage),
+ read_cred_subscribers(p->cred));
atomic_inc(&p->cred->user->processes);
return 0;
}
@@ -331,6 +475,8 @@
atomic_inc(&new->user->processes);
p->cred = p->real_cred = get_cred(new);
+ alter_cred_subscribers(new, 2);
+ validate_creds(new);
return 0;
error_put:
@@ -355,13 +501,20 @@
int commit_creds(struct cred *new)
{
struct task_struct *task = current;
- const struct cred *old;
+ const struct cred *old = task->real_cred;
- BUG_ON(task->cred != task->real_cred);
- BUG_ON(atomic_read(&task->real_cred->usage) < 2);
+ kdebug("commit_creds(%p{%d,%d})", new,
+ atomic_read(&new->usage),
+ read_cred_subscribers(new));
+
+ BUG_ON(task->cred != old);
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ BUG_ON(read_cred_subscribers(old) < 2);
+ validate_creds(old);
+ validate_creds(new);
+#endif
BUG_ON(atomic_read(&new->usage) < 1);
- old = task->real_cred;
security_commit_creds(new, old);
get_cred(new); /* we will require a ref for the subj creds too */
@@ -390,12 +543,14 @@
* cheaply with the new uid cache, so if it matters
* we should be checking for it. -DaveM
*/
+ alter_cred_subscribers(new, 2);
if (new->user != old->user)
atomic_inc(&new->user->processes);
rcu_assign_pointer(task->real_cred, new);
rcu_assign_pointer(task->cred, new);
if (new->user != old->user)
atomic_dec(&old->user->processes);
+ alter_cred_subscribers(old, -2);
sched_switch_user(task);
@@ -428,6 +583,13 @@
*/
void abort_creds(struct cred *new)
{
+ kdebug("abort_creds(%p{%d,%d})", new,
+ atomic_read(&new->usage),
+ read_cred_subscribers(new));
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+ BUG_ON(read_cred_subscribers(new) != 0);
+#endif
BUG_ON(atomic_read(&new->usage) < 1);
put_cred(new);
}
@@ -444,7 +606,20 @@
{
const struct cred *old = current->cred;
- rcu_assign_pointer(current->cred, get_cred(new));
+ kdebug("override_creds(%p{%d,%d})", new,
+ atomic_read(&new->usage),
+ read_cred_subscribers(new));
+
+ validate_creds(old);
+ validate_creds(new);
+ get_cred(new);
+ alter_cred_subscribers(new, 1);
+ rcu_assign_pointer(current->cred, new);
+ alter_cred_subscribers(old, -1);
+
+ kdebug("override_creds() = %p{%d,%d}", old,
+ atomic_read(&old->usage),
+ read_cred_subscribers(old));
return old;
}
EXPORT_SYMBOL(override_creds);
@@ -460,7 +635,15 @@
{
const struct cred *override = current->cred;
+ kdebug("revert_creds(%p{%d,%d})", old,
+ atomic_read(&old->usage),
+ read_cred_subscribers(old));
+
+ validate_creds(old);
+ validate_creds(override);
+ alter_cred_subscribers(old, 1);
rcu_assign_pointer(current->cred, old);
+ alter_cred_subscribers(override, -1);
put_cred(override);
}
EXPORT_SYMBOL(revert_creds);
@@ -502,11 +685,15 @@
if (!new)
return NULL;
+ kdebug("prepare_kernel_cred() alloc %p", new);
+
if (daemon)
old = get_task_cred(daemon);
else
old = get_cred(&init_cred);
+ validate_creds(old);
+
*new = *old;
get_uid(new->user);
get_group_info(new->group_info);
@@ -526,7 +713,9 @@
goto error;
atomic_set(&new->usage, 1);
+ set_cred_subscribers(new, 0);
put_cred(old);
+ validate_creds(new);
return new;
error:
@@ -589,3 +778,95 @@
return security_kernel_create_files_as(new, inode);
}
EXPORT_SYMBOL(set_create_files_as);
+
+#ifdef CONFIG_DEBUG_CREDENTIALS
+
+/*
+ * dump invalid credentials
+ */
+static void dump_invalid_creds(const struct cred *cred, const char *label,
+ const struct task_struct *tsk)
+{
+ printk(KERN_ERR "CRED: %s credentials: %p %s%s%s\n",
+ label, cred,
+ cred == &init_cred ? "[init]" : "",
+ cred == tsk->real_cred ? "[real]" : "",
+ cred == tsk->cred ? "[eff]" : "");
+ printk(KERN_ERR "CRED: ->magic=%x, put_addr=%p\n",
+ cred->magic, cred->put_addr);
+ printk(KERN_ERR "CRED: ->usage=%d, subscr=%d\n",
+ atomic_read(&cred->usage),
+ read_cred_subscribers(cred));
+ printk(KERN_ERR "CRED: ->*uid = { %d,%d,%d,%d }\n",
+ cred->uid, cred->euid, cred->suid, cred->fsuid);
+ printk(KERN_ERR "CRED: ->*gid = { %d,%d,%d,%d }\n",
+ cred->gid, cred->egid, cred->sgid, cred->fsgid);
+#ifdef CONFIG_SECURITY
+ printk(KERN_ERR "CRED: ->security is %p\n", cred->security);
+ if ((unsigned long) cred->security >= PAGE_SIZE &&
+ (((unsigned long) cred->security & 0xffffff00) !=
+ (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8)))
+ printk(KERN_ERR "CRED: ->security {%x, %x}\n",
+ ((u32*)cred->security)[0],
+ ((u32*)cred->security)[1]);
+#endif
+}
+
+/*
+ * report use of invalid credentials
+ */
+void __invalid_creds(const struct cred *cred, const char *file, unsigned line)
+{
+ printk(KERN_ERR "CRED: Invalid credentials\n");
+ printk(KERN_ERR "CRED: At %s:%u\n", file, line);
+ dump_invalid_creds(cred, "Specified", current);
+ BUG();
+}
+EXPORT_SYMBOL(__invalid_creds);
+
+/*
+ * check the credentials on a process
+ */
+void __validate_process_creds(struct task_struct *tsk,
+ const char *file, unsigned line)
+{
+ if (tsk->cred == tsk->real_cred) {
+ if (unlikely(read_cred_subscribers(tsk->cred) < 2 ||
+ creds_are_invalid(tsk->cred)))
+ goto invalid_creds;
+ } else {
+ if (unlikely(read_cred_subscribers(tsk->real_cred) < 1 ||
+ read_cred_subscribers(tsk->cred) < 1 ||
+ creds_are_invalid(tsk->real_cred) ||
+ creds_are_invalid(tsk->cred)))
+ goto invalid_creds;
+ }
+ return;
+
+invalid_creds:
+ printk(KERN_ERR "CRED: Invalid process credentials\n");
+ printk(KERN_ERR "CRED: At %s:%u\n", file, line);
+
+ dump_invalid_creds(tsk->real_cred, "Real", tsk);
+ if (tsk->cred != tsk->real_cred)
+ dump_invalid_creds(tsk->cred, "Effective", tsk);
+ else
+ printk(KERN_ERR "CRED: Effective creds == Real creds\n");
+ BUG();
+}
+EXPORT_SYMBOL(__validate_process_creds);
+
+/*
+ * check creds for do_exit()
+ */
+void validate_creds_for_do_exit(struct task_struct *tsk)
+{
+ kdebug("validate_creds_for_do_exit(%p,%p{%d,%d})",
+ tsk->real_cred, tsk->cred,
+ atomic_read(&tsk->cred->usage),
+ read_cred_subscribers(tsk->cred));
+
+ __validate_process_creds(tsk, __FILE__, __LINE__);
+}
+
+#endif /* CONFIG_DEBUG_CREDENTIALS */
diff --git a/kernel/exit.c b/kernel/exit.c
index 869dc22..ae5d866 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -901,6 +901,8 @@
tracehook_report_exit(&code);
+ validate_creds_for_do_exit(tsk);
+
/*
* We're taking recursive faults here in do_exit. Safest is to just
* leave this task alone and wait for reboot.
@@ -1009,7 +1011,10 @@
if (tsk->splice_pipe)
__free_pipe_info(tsk->splice_pipe);
+ validate_creds_for_do_exit(tsk);
+
preempt_disable();
+ exit_rcu();
/* causes final put_task_struct in finish_task_switch(). */
tsk->state = TASK_DEAD;
schedule();
diff --git a/kernel/fork.c b/kernel/fork.c
index 144326b..bfee931 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -152,8 +152,7 @@
WARN_ON(atomic_read(&tsk->usage));
WARN_ON(tsk == current);
- put_cred(tsk->real_cred);
- put_cred(tsk->cred);
+ exit_creds(tsk);
delayacct_tsk_free(tsk);
if (!profile_handoff_task(tsk))
@@ -815,11 +814,8 @@
{
struct signal_struct *sig;
- if (clone_flags & CLONE_THREAD) {
- atomic_inc(¤t->signal->count);
- atomic_inc(¤t->signal->live);
+ if (clone_flags & CLONE_THREAD)
return 0;
- }
sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
tsk->signal = sig;
@@ -877,16 +873,6 @@
kmem_cache_free(signal_cachep, sig);
}
-static void cleanup_signal(struct task_struct *tsk)
-{
- struct signal_struct *sig = tsk->signal;
-
- atomic_dec(&sig->live);
-
- if (atomic_dec_and_test(&sig->count))
- __cleanup_signal(sig);
-}
-
static void copy_flags(unsigned long clone_flags, struct task_struct *p)
{
unsigned long new_flags = p->flags;
@@ -1021,10 +1007,7 @@
copy_flags(clone_flags, p);
INIT_LIST_HEAD(&p->children);
INIT_LIST_HEAD(&p->sibling);
-#ifdef CONFIG_PREEMPT_RCU
- p->rcu_read_lock_nesting = 0;
- p->rcu_flipctr_idx = 0;
-#endif /* #ifdef CONFIG_PREEMPT_RCU */
+ rcu_copy_process(p);
p->vfork_done = NULL;
spin_lock_init(&p->alloc_lock);
@@ -1239,6 +1222,8 @@
}
if (clone_flags & CLONE_THREAD) {
+ atomic_inc(¤t->signal->count);
+ atomic_inc(¤t->signal->live);
p->group_leader = current->group_leader;
list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group);
}
@@ -1282,7 +1267,8 @@
if (p->mm)
mmput(p->mm);
bad_fork_cleanup_signal:
- cleanup_signal(p);
+ if (!(clone_flags & CLONE_THREAD))
+ __cleanup_signal(p->signal);
bad_fork_cleanup_sighand:
__cleanup_sighand(p->sighand);
bad_fork_cleanup_fs:
@@ -1307,8 +1293,7 @@
module_put(task_thread_info(p)->exec_domain->module);
bad_fork_cleanup_count:
atomic_dec(&p->cred->user->processes);
- put_cred(p->real_cred);
- put_cred(p->cred);
+ exit_creds(p);
bad_fork_free:
free_task(p);
fork_out:
diff --git a/kernel/futex.c b/kernel/futex.c
index e18cfbd..248dd11 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -115,6 +115,9 @@
/* rt_waiter storage for requeue_pi: */
struct rt_mutex_waiter *rt_waiter;
+ /* The expected requeue pi target futex key: */
+ union futex_key *requeue_pi_key;
+
/* Bitset for the optional bitmasked wakeup */
u32 bitset;
};
@@ -1089,6 +1092,10 @@
if (!top_waiter)
return 0;
+ /* Ensure we requeue to the expected futex. */
+ if (!match_futex(top_waiter->requeue_pi_key, key2))
+ return -EINVAL;
+
/*
* Try to take the lock for top_waiter. Set the FUTEX_WAITERS bit in
* the contended case or if set_waiters is 1. The pi_state is returned
@@ -1276,6 +1283,12 @@
continue;
}
+ /* Ensure we requeue to the expected futex for requeue_pi. */
+ if (requeue_pi && !match_futex(this->requeue_pi_key, &key2)) {
+ ret = -EINVAL;
+ break;
+ }
+
/*
* Requeue nr_requeue waiters and possibly one more in the case
* of requeue_pi if we couldn't acquire the lock atomically.
@@ -1751,6 +1764,7 @@
q.pi_state = NULL;
q.bitset = bitset;
q.rt_waiter = NULL;
+ q.requeue_pi_key = NULL;
if (abs_time) {
to = &timeout;
@@ -1858,6 +1872,7 @@
q.pi_state = NULL;
q.rt_waiter = NULL;
+ q.requeue_pi_key = NULL;
retry:
q.key = FUTEX_KEY_INIT;
ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
@@ -2118,11 +2133,11 @@
* We call schedule in futex_wait_queue_me() when we enqueue and return there
* via the following:
* 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue()
- * 2) wakeup on uaddr2 after a requeue and subsequent unlock
- * 3) signal (before or after requeue)
- * 4) timeout (before or after requeue)
+ * 2) wakeup on uaddr2 after a requeue
+ * 3) signal
+ * 4) timeout
*
- * If 3, we setup a restart_block with futex_wait_requeue_pi() as the function.
+ * If 3, cleanup and return -ERESTARTNOINTR.
*
* If 2, we may then block on trying to take the rt_mutex and return via:
* 5) successful lock
@@ -2130,7 +2145,7 @@
* 7) timeout
* 8) other lock acquisition failure
*
- * If 6, we setup a restart_block with futex_lock_pi() as the function.
+ * If 6, return -EWOULDBLOCK (restarting the syscall would do the same).
*
* If 4 or 7, we cleanup and return with -ETIMEDOUT.
*
@@ -2169,15 +2184,16 @@
debug_rt_mutex_init_waiter(&rt_waiter);
rt_waiter.task = NULL;
- q.pi_state = NULL;
- q.bitset = bitset;
- q.rt_waiter = &rt_waiter;
-
key2 = FUTEX_KEY_INIT;
ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
+ q.pi_state = NULL;
+ q.bitset = bitset;
+ q.rt_waiter = &rt_waiter;
+ q.requeue_pi_key = &key2;
+
/* Prepare to wait on uaddr. */
ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
if (ret)
@@ -2248,14 +2264,11 @@
rt_mutex_unlock(pi_mutex);
} else if (ret == -EINTR) {
/*
- * We've already been requeued, but we have no way to
- * restart by calling futex_lock_pi() directly. We
- * could restart the syscall, but that will look at
- * the user space value and return right away. So we
- * drop back with EWOULDBLOCK to tell user space that
- * "val" has been changed. That's the same what the
- * restart of the syscall would do in
- * futex_wait_setup().
+ * We've already been requeued, but cannot restart by calling
+ * futex_lock_pi() directly. We could restart this syscall, but
+ * it would detect that the user space "val" changed and return
+ * -EWOULDBLOCK. Save the overhead of the restart and return
+ * -EWOULDBLOCK directly.
*/
ret = -EWOULDBLOCK;
}
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 49da79a..05071bf 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -485,6 +485,7 @@
debug_object_init_on_stack(timer, &hrtimer_debug_descr);
__hrtimer_init(timer, clock_id, mode);
}
+EXPORT_SYMBOL_GPL(hrtimer_init_on_stack);
void destroy_hrtimer_on_stack(struct hrtimer *timer)
{
@@ -1477,6 +1478,7 @@
sl->timer.function = hrtimer_wakeup;
sl->task = task;
}
+EXPORT_SYMBOL_GPL(hrtimer_init_sleeper);
static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
{
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 13c68e7..c166019 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -222,6 +222,34 @@
}
EXPORT_SYMBOL(set_irq_chip_data);
+/**
+ * set_irq_nested_thread - Set/Reset the IRQ_NESTED_THREAD flag of an irq
+ *
+ * @irq: Interrupt number
+ * @nest: 0 to clear / 1 to set the IRQ_NESTED_THREAD flag
+ *
+ * The IRQ_NESTED_THREAD flag indicates that on
+ * request_threaded_irq() no separate interrupt thread should be
+ * created for the irq as the handler are called nested in the
+ * context of a demultiplexing interrupt handler thread.
+ */
+void set_irq_nested_thread(unsigned int irq, int nest)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+
+ if (!desc)
+ return;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ if (nest)
+ desc->status |= IRQ_NESTED_THREAD;
+ else
+ desc->status &= ~IRQ_NESTED_THREAD;
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(set_irq_nested_thread);
+
/*
* default enable function
*/
@@ -299,6 +327,45 @@
}
}
+/*
+ * handle_nested_irq - Handle a nested irq from a irq thread
+ * @irq: the interrupt number
+ *
+ * Handle interrupts which are nested into a threaded interrupt
+ * handler. The handler function is called inside the calling
+ * threads context.
+ */
+void handle_nested_irq(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ irqreturn_t action_ret;
+
+ might_sleep();
+
+ spin_lock_irq(&desc->lock);
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ action = desc->action;
+ if (unlikely(!action || (desc->status & IRQ_DISABLED)))
+ goto out_unlock;
+
+ desc->status |= IRQ_INPROGRESS;
+ spin_unlock_irq(&desc->lock);
+
+ action_ret = action->thread_fn(action->irq, action->dev_id);
+ if (!noirqdebug)
+ note_interrupt(irq, desc, action_ret);
+
+ spin_lock_irq(&desc->lock);
+ desc->status &= ~IRQ_INPROGRESS;
+
+out_unlock:
+ spin_unlock_irq(&desc->lock);
+}
+EXPORT_SYMBOL_GPL(handle_nested_irq);
+
/**
* handle_simple_irq - Simple and software-decoded IRQs.
* @irq: the interrupt number
@@ -382,7 +449,10 @@
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
- if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+
+ if (unlikely(desc->status & IRQ_ONESHOT))
+ desc->status |= IRQ_MASKED;
+ else if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
desc->chip->unmask(irq);
out_unlock:
spin_unlock(&desc->lock);
@@ -572,6 +642,7 @@
desc->chip = &dummy_irq_chip;
}
+ chip_bus_lock(irq, desc);
spin_lock_irqsave(&desc->lock, flags);
/* Uninstall? */
@@ -591,6 +662,7 @@
desc->chip->startup(irq);
}
spin_unlock_irqrestore(&desc->lock, flags);
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL_GPL(__set_irq_handler);
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 065205b..a81cf80 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -161,7 +161,7 @@
desc = irq_desc_legacy;
legacy_count = ARRAY_SIZE(irq_desc_legacy);
- node = first_online_node;
+ node = first_online_node;
/* allocate irq_desc_ptrs array based on nr_irqs */
irq_desc_ptrs = kcalloc(nr_irqs, sizeof(void *), GFP_NOWAIT);
@@ -172,6 +172,9 @@
for (i = 0; i < legacy_count; i++) {
desc[i].irq = i;
+#ifdef CONFIG_SMP
+ desc[i].node = node;
+#endif
desc[i].kstat_irqs = kstat_irqs_legacy + i * nr_cpu_ids;
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
alloc_desc_masks(&desc[i], node, true);
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index e70ed55..1b5d742 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -44,6 +44,19 @@
extern void irq_set_thread_affinity(struct irq_desc *desc);
+/* Inline functions for support of irq chips on slow busses */
+static inline void chip_bus_lock(unsigned int irq, struct irq_desc *desc)
+{
+ if (unlikely(desc->chip->bus_lock))
+ desc->chip->bus_lock(irq);
+}
+
+static inline void chip_bus_sync_unlock(unsigned int irq, struct irq_desc *desc)
+{
+ if (unlikely(desc->chip->bus_sync_unlock))
+ desc->chip->bus_sync_unlock(irq);
+}
+
/*
* Debugging printout:
*/
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 0ec9ed8..bde4c66 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -230,9 +230,11 @@
if (!desc)
return;
+ chip_bus_lock(irq, desc);
spin_lock_irqsave(&desc->lock, flags);
__disable_irq(desc, irq, false);
spin_unlock_irqrestore(&desc->lock, flags);
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL(disable_irq_nosync);
@@ -294,7 +296,8 @@
* matches the last disable, processing of interrupts on this
* IRQ line is re-enabled.
*
- * This function may be called from IRQ context.
+ * This function may be called from IRQ context only when
+ * desc->chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
*/
void enable_irq(unsigned int irq)
{
@@ -304,9 +307,11 @@
if (!desc)
return;
+ chip_bus_lock(irq, desc);
spin_lock_irqsave(&desc->lock, flags);
__enable_irq(desc, irq, false);
spin_unlock_irqrestore(&desc->lock, flags);
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL(enable_irq);
@@ -436,6 +441,26 @@
return ret;
}
+/*
+ * Default primary interrupt handler for threaded interrupts. Is
+ * assigned as primary handler when request_threaded_irq is called
+ * with handler == NULL. Useful for oneshot interrupts.
+ */
+static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
+/*
+ * Primary handler for nested threaded interrupts. Should never be
+ * called.
+ */
+static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
+{
+ WARN(1, "Primary handler called for nested irq %d\n", irq);
+ return IRQ_NONE;
+}
+
static int irq_wait_for_interrupt(struct irqaction *action)
{
while (!kthread_should_stop()) {
@@ -451,6 +476,23 @@
return -1;
}
+/*
+ * Oneshot interrupts keep the irq line masked until the threaded
+ * handler finished. unmask if the interrupt has not been disabled and
+ * is marked MASKED.
+ */
+static void irq_finalize_oneshot(unsigned int irq, struct irq_desc *desc)
+{
+ chip_bus_lock(irq, desc);
+ spin_lock_irq(&desc->lock);
+ if (!(desc->status & IRQ_DISABLED) && (desc->status & IRQ_MASKED)) {
+ desc->status &= ~IRQ_MASKED;
+ desc->chip->unmask(irq);
+ }
+ spin_unlock_irq(&desc->lock);
+ chip_bus_sync_unlock(irq, desc);
+}
+
#ifdef CONFIG_SMP
/*
* Check whether we need to change the affinity of the interrupt thread.
@@ -492,7 +534,7 @@
struct sched_param param = { .sched_priority = MAX_USER_RT_PRIO/2, };
struct irqaction *action = data;
struct irq_desc *desc = irq_to_desc(action->irq);
- int wake;
+ int wake, oneshot = desc->status & IRQ_ONESHOT;
sched_setscheduler(current, SCHED_FIFO, ¶m);
current->irqaction = action;
@@ -518,6 +560,9 @@
spin_unlock_irq(&desc->lock);
action->thread_fn(action->irq, action->dev_id);
+
+ if (oneshot)
+ irq_finalize_oneshot(action->irq, desc);
}
wake = atomic_dec_and_test(&desc->threads_active);
@@ -565,7 +610,7 @@
struct irqaction *old, **old_ptr;
const char *old_name = NULL;
unsigned long flags;
- int shared = 0;
+ int nested, shared = 0;
int ret;
if (!desc)
@@ -590,10 +635,32 @@
rand_initialize_irq(irq);
}
+ /* Oneshot interrupts are not allowed with shared */
+ if ((new->flags & IRQF_ONESHOT) && (new->flags & IRQF_SHARED))
+ return -EINVAL;
+
/*
- * Threaded handler ?
+ * Check whether the interrupt nests into another interrupt
+ * thread.
*/
- if (new->thread_fn) {
+ nested = desc->status & IRQ_NESTED_THREAD;
+ if (nested) {
+ if (!new->thread_fn)
+ return -EINVAL;
+ /*
+ * Replace the primary handler which was provided from
+ * the driver for non nested interrupt handling by the
+ * dummy function which warns when called.
+ */
+ new->handler = irq_nested_primary_handler;
+ }
+
+ /*
+ * Create a handler thread when a thread function is supplied
+ * and the interrupt does not nest into another interrupt
+ * thread.
+ */
+ if (new->thread_fn && !nested) {
struct task_struct *t;
t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
@@ -662,9 +729,12 @@
desc->status |= IRQ_PER_CPU;
#endif
- desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
+ desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING | IRQ_ONESHOT |
IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
+ if (new->flags & IRQF_ONESHOT)
+ desc->status |= IRQ_ONESHOT;
+
if (!(desc->status & IRQ_NOAUTOEN)) {
desc->depth = 0;
desc->status &= ~IRQ_DISABLED;
@@ -875,7 +945,14 @@
*/
void free_irq(unsigned int irq, void *dev_id)
{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return;
+
+ chip_bus_lock(irq, desc);
kfree(__free_irq(irq, dev_id));
+ chip_bus_sync_unlock(irq, desc);
}
EXPORT_SYMBOL(free_irq);
@@ -884,6 +961,8 @@
* @irq: Interrupt line to allocate
* @handler: Function to be called when the IRQ occurs.
* Primary handler for threaded interrupts
+ * If NULL and thread_fn != NULL the default
+ * primary handler is installed
* @thread_fn: Function called from the irq handler thread
* If NULL, no irq thread is created
* @irqflags: Interrupt type flags
@@ -963,8 +1042,12 @@
if (desc->status & IRQ_NOREQUEST)
return -EINVAL;
- if (!handler)
- return -EINVAL;
+
+ if (!handler) {
+ if (!thread_fn)
+ return -EINVAL;
+ handler = irq_default_primary_handler;
+ }
action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
if (!action)
@@ -976,7 +1059,10 @@
action->name = devname;
action->dev_id = dev_id;
+ chip_bus_lock(irq, desc);
retval = __setup_irq(irq, desc, action);
+ chip_bus_sync_unlock(irq, desc);
+
if (retval)
kfree(action);
diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
index 638d8be..a0bb09e 100644
--- a/kernel/irq/pm.c
+++ b/kernel/irq/pm.c
@@ -15,10 +15,10 @@
/**
* suspend_device_irqs - disable all currently enabled interrupt lines
*
- * During system-wide suspend or hibernation device interrupts need to be
- * disabled at the chip level and this function is provided for this purpose.
- * It disables all interrupt lines that are enabled at the moment and sets the
- * IRQ_SUSPENDED flag for them.
+ * During system-wide suspend or hibernation device drivers need to be prevented
+ * from receiving interrupts and this function is provided for this purpose.
+ * It marks all interrupt lines in use, except for the timer ones, as disabled
+ * and sets the IRQ_SUSPENDED flag for each of them.
*/
void suspend_device_irqs(void)
{
diff --git a/kernel/irq/resend.c b/kernel/irq/resend.c
index 89c7117..090c376 100644
--- a/kernel/irq/resend.c
+++ b/kernel/irq/resend.c
@@ -70,8 +70,7 @@
if ((status & (IRQ_LEVEL | IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
desc->status = (status & ~IRQ_PENDING) | IRQ_REPLAY;
- if (!desc->chip || !desc->chip->retrigger ||
- !desc->chip->retrigger(irq)) {
+ if (!desc->chip->retrigger || !desc->chip->retrigger(irq)) {
#ifdef CONFIG_HARDIRQS_SW_RESEND
/* Set it pending and activate the softirq: */
set_bit(irq, irqs_resend);
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 4d56829..114e704 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -297,7 +297,6 @@
__setup("irqfixup", irqfixup_setup);
module_param(irqfixup, int, 0644);
-MODULE_PARM_DESC("irqfixup", "0: No fixup, 1: irqfixup mode, 2: irqpoll mode");
static int __init irqpoll_setup(char *str)
{
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 385c31a..9fcb53a 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -37,6 +37,8 @@
#include <linux/suspend.h>
#include <asm/uaccess.h>
+#include <trace/events/module.h>
+
extern int max_threads;
static struct workqueue_struct *khelper_wq;
@@ -78,6 +80,10 @@
#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
+ ret = security_kernel_module_request();
+ if (ret)
+ return ret;
+
va_start(args, fmt);
ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);
va_end(args);
@@ -108,6 +114,8 @@
return -ENOMEM;
}
+ trace_module_request(module_name, wait, _RET_IP_);
+
ret = call_usermodehelper(modprobe_path, argv, envp,
wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC);
atomic_dec(&kmod_concurrent);
@@ -462,6 +470,7 @@
int retval = 0;
BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
+ validate_creds(sub_info->cred);
helper_lock();
if (sub_info->path[0] == '\0')
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 0540948..ef177d6 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -103,7 +103,7 @@
#define INSNS_PER_PAGE (PAGE_SIZE/(MAX_INSN_SIZE * sizeof(kprobe_opcode_t)))
struct kprobe_insn_page {
- struct hlist_node hlist;
+ struct list_head list;
kprobe_opcode_t *insns; /* Page of instruction slots */
char slot_used[INSNS_PER_PAGE];
int nused;
@@ -117,7 +117,7 @@
};
static DEFINE_MUTEX(kprobe_insn_mutex); /* Protects kprobe_insn_pages */
-static struct hlist_head kprobe_insn_pages;
+static LIST_HEAD(kprobe_insn_pages);
static int kprobe_garbage_slots;
static int collect_garbage_slots(void);
@@ -152,10 +152,9 @@
static kprobe_opcode_t __kprobes *__get_insn_slot(void)
{
struct kprobe_insn_page *kip;
- struct hlist_node *pos;
retry:
- hlist_for_each_entry(kip, pos, &kprobe_insn_pages, hlist) {
+ list_for_each_entry(kip, &kprobe_insn_pages, list) {
if (kip->nused < INSNS_PER_PAGE) {
int i;
for (i = 0; i < INSNS_PER_PAGE; i++) {
@@ -189,8 +188,8 @@
kfree(kip);
return NULL;
}
- INIT_HLIST_NODE(&kip->hlist);
- hlist_add_head(&kip->hlist, &kprobe_insn_pages);
+ INIT_LIST_HEAD(&kip->list);
+ list_add(&kip->list, &kprobe_insn_pages);
memset(kip->slot_used, SLOT_CLEAN, INSNS_PER_PAGE);
kip->slot_used[0] = SLOT_USED;
kip->nused = 1;
@@ -219,12 +218,8 @@
* so as not to have to set it up again the
* next time somebody inserts a probe.
*/
- hlist_del(&kip->hlist);
- if (hlist_empty(&kprobe_insn_pages)) {
- INIT_HLIST_NODE(&kip->hlist);
- hlist_add_head(&kip->hlist,
- &kprobe_insn_pages);
- } else {
+ if (!list_is_singular(&kprobe_insn_pages)) {
+ list_del(&kip->list);
module_free(NULL, kip->insns);
kfree(kip);
}
@@ -235,14 +230,13 @@
static int __kprobes collect_garbage_slots(void)
{
- struct kprobe_insn_page *kip;
- struct hlist_node *pos, *next;
+ struct kprobe_insn_page *kip, *next;
/* Ensure no-one is preepmted on the garbages */
if (check_safety())
return -EAGAIN;
- hlist_for_each_entry_safe(kip, pos, next, &kprobe_insn_pages, hlist) {
+ list_for_each_entry_safe(kip, next, &kprobe_insn_pages, list) {
int i;
if (kip->ngarbage == 0)
continue;
@@ -260,19 +254,17 @@
void __kprobes free_insn_slot(kprobe_opcode_t * slot, int dirty)
{
struct kprobe_insn_page *kip;
- struct hlist_node *pos;
mutex_lock(&kprobe_insn_mutex);
- hlist_for_each_entry(kip, pos, &kprobe_insn_pages, hlist) {
+ list_for_each_entry(kip, &kprobe_insn_pages, list) {
if (kip->insns <= slot &&
slot < kip->insns + (INSNS_PER_PAGE * MAX_INSN_SIZE)) {
int i = (slot - kip->insns) / MAX_INSN_SIZE;
if (dirty) {
kip->slot_used[i] = SLOT_DIRTY;
kip->ngarbage++;
- } else {
+ } else
collect_one_slot(kip, i);
- }
break;
}
}
diff --git a/kernel/kthread.c b/kernel/kthread.c
index eb8751a..5fe7099 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -16,8 +16,6 @@
#include <linux/mutex.h>
#include <trace/events/sched.h>
-#define KTHREAD_NICE_LEVEL (-5)
-
static DEFINE_SPINLOCK(kthread_create_lock);
static LIST_HEAD(kthread_create_list);
struct task_struct *kthreadd_task;
@@ -145,7 +143,6 @@
* The kernel thread should not inherit these properties.
*/
sched_setscheduler_nocheck(create.result, SCHED_NORMAL, ¶m);
- set_user_nice(create.result, KTHREAD_NICE_LEVEL);
set_cpus_allowed_ptr(create.result, cpu_all_mask);
}
return create.result;
@@ -221,7 +218,6 @@
/* Setup a clean context for our children to inherit. */
set_task_comm(tsk, "kthreadd");
ignore_signals(tsk);
- set_user_nice(tsk, KTHREAD_NICE_LEVEL);
set_cpus_allowed_ptr(tsk, cpu_all_mask);
set_mems_allowed(node_possible_map);
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 8bbeef9..f74d2d7 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -42,6 +42,7 @@
#include <linux/hash.h>
#include <linux/ftrace.h>
#include <linux/stringify.h>
+#include <linux/bitops.h>
#include <asm/sections.h>
@@ -366,11 +367,21 @@
save_stack_trace(trace);
+ /*
+ * Some daft arches put -1 at the end to indicate its a full trace.
+ *
+ * <rant> this is buggy anyway, since it takes a whole extra entry so a
+ * complete trace that maxes out the entries provided will be reported
+ * as incomplete, friggin useless </rant>
+ */
+ if (trace->entries[trace->nr_entries-1] == ULONG_MAX)
+ trace->nr_entries--;
+
trace->max_entries = trace->nr_entries;
nr_stack_trace_entries += trace->nr_entries;
- if (nr_stack_trace_entries == MAX_STACK_TRACE_ENTRIES) {
+ if (nr_stack_trace_entries >= MAX_STACK_TRACE_ENTRIES-1) {
if (!debug_locks_off_graph_unlock())
return 0;
@@ -388,20 +399,6 @@
unsigned int nr_softirq_chains;
unsigned int nr_process_chains;
unsigned int max_lockdep_depth;
-unsigned int max_recursion_depth;
-
-static unsigned int lockdep_dependency_gen_id;
-
-static bool lockdep_dependency_visit(struct lock_class *source,
- unsigned int depth)
-{
- if (!depth)
- lockdep_dependency_gen_id++;
- if (source->dep_gen_id == lockdep_dependency_gen_id)
- return true;
- source->dep_gen_id = lockdep_dependency_gen_id;
- return false;
-}
#ifdef CONFIG_DEBUG_LOCKDEP
/*
@@ -431,11 +428,8 @@
atomic_t redundant_softirqs_off;
atomic_t nr_unused_locks;
atomic_t nr_cyclic_checks;
-atomic_t nr_cyclic_check_recursions;
atomic_t nr_find_usage_forwards_checks;
-atomic_t nr_find_usage_forwards_recursions;
atomic_t nr_find_usage_backwards_checks;
-atomic_t nr_find_usage_backwards_recursions;
#endif
/*
@@ -551,58 +545,6 @@
}
}
-static void print_lock_class_header(struct lock_class *class, int depth)
-{
- int bit;
-
- printk("%*s->", depth, "");
- print_lock_name(class);
- printk(" ops: %lu", class->ops);
- printk(" {\n");
-
- for (bit = 0; bit < LOCK_USAGE_STATES; bit++) {
- if (class->usage_mask & (1 << bit)) {
- int len = depth;
-
- len += printk("%*s %s", depth, "", usage_str[bit]);
- len += printk(" at:\n");
- print_stack_trace(class->usage_traces + bit, len);
- }
- }
- printk("%*s }\n", depth, "");
-
- printk("%*s ... key at: ",depth,"");
- print_ip_sym((unsigned long)class->key);
-}
-
-/*
- * printk all lock dependencies starting at <entry>:
- */
-static void __used
-print_lock_dependencies(struct lock_class *class, int depth)
-{
- struct lock_list *entry;
-
- if (lockdep_dependency_visit(class, depth))
- return;
-
- if (DEBUG_LOCKS_WARN_ON(depth >= 20))
- return;
-
- print_lock_class_header(class, depth);
-
- list_for_each_entry(entry, &class->locks_after, entry) {
- if (DEBUG_LOCKS_WARN_ON(!entry->class))
- return;
-
- print_lock_dependencies(entry->class, depth + 1);
-
- printk("%*s ... acquired at:\n",depth,"");
- print_stack_trace(&entry->trace, 2);
- printk("\n");
- }
-}
-
static void print_kernel_version(void)
{
printk("%s %.*s\n", init_utsname()->release,
@@ -898,22 +840,203 @@
}
/*
+ * For good efficiency of modular, we use power of 2
+ */
+#define MAX_CIRCULAR_QUEUE_SIZE 4096UL
+#define CQ_MASK (MAX_CIRCULAR_QUEUE_SIZE-1)
+
+/*
+ * The circular_queue and helpers is used to implement the
+ * breadth-first search(BFS)algorithem, by which we can build
+ * the shortest path from the next lock to be acquired to the
+ * previous held lock if there is a circular between them.
+ */
+struct circular_queue {
+ unsigned long element[MAX_CIRCULAR_QUEUE_SIZE];
+ unsigned int front, rear;
+};
+
+static struct circular_queue lock_cq;
+
+unsigned int max_bfs_queue_depth;
+
+static unsigned int lockdep_dependency_gen_id;
+
+static inline void __cq_init(struct circular_queue *cq)
+{
+ cq->front = cq->rear = 0;
+ lockdep_dependency_gen_id++;
+}
+
+static inline int __cq_empty(struct circular_queue *cq)
+{
+ return (cq->front == cq->rear);
+}
+
+static inline int __cq_full(struct circular_queue *cq)
+{
+ return ((cq->rear + 1) & CQ_MASK) == cq->front;
+}
+
+static inline int __cq_enqueue(struct circular_queue *cq, unsigned long elem)
+{
+ if (__cq_full(cq))
+ return -1;
+
+ cq->element[cq->rear] = elem;
+ cq->rear = (cq->rear + 1) & CQ_MASK;
+ return 0;
+}
+
+static inline int __cq_dequeue(struct circular_queue *cq, unsigned long *elem)
+{
+ if (__cq_empty(cq))
+ return -1;
+
+ *elem = cq->element[cq->front];
+ cq->front = (cq->front + 1) & CQ_MASK;
+ return 0;
+}
+
+static inline unsigned int __cq_get_elem_count(struct circular_queue *cq)
+{
+ return (cq->rear - cq->front) & CQ_MASK;
+}
+
+static inline void mark_lock_accessed(struct lock_list *lock,
+ struct lock_list *parent)
+{
+ unsigned long nr;
+
+ nr = lock - list_entries;
+ WARN_ON(nr >= nr_list_entries);
+ lock->parent = parent;
+ lock->class->dep_gen_id = lockdep_dependency_gen_id;
+}
+
+static inline unsigned long lock_accessed(struct lock_list *lock)
+{
+ unsigned long nr;
+
+ nr = lock - list_entries;
+ WARN_ON(nr >= nr_list_entries);
+ return lock->class->dep_gen_id == lockdep_dependency_gen_id;
+}
+
+static inline struct lock_list *get_lock_parent(struct lock_list *child)
+{
+ return child->parent;
+}
+
+static inline int get_lock_depth(struct lock_list *child)
+{
+ int depth = 0;
+ struct lock_list *parent;
+
+ while ((parent = get_lock_parent(child))) {
+ child = parent;
+ depth++;
+ }
+ return depth;
+}
+
+static int __bfs(struct lock_list *source_entry,
+ void *data,
+ int (*match)(struct lock_list *entry, void *data),
+ struct lock_list **target_entry,
+ int forward)
+{
+ struct lock_list *entry;
+ struct list_head *head;
+ struct circular_queue *cq = &lock_cq;
+ int ret = 1;
+
+ if (match(source_entry, data)) {
+ *target_entry = source_entry;
+ ret = 0;
+ goto exit;
+ }
+
+ if (forward)
+ head = &source_entry->class->locks_after;
+ else
+ head = &source_entry->class->locks_before;
+
+ if (list_empty(head))
+ goto exit;
+
+ __cq_init(cq);
+ __cq_enqueue(cq, (unsigned long)source_entry);
+
+ while (!__cq_empty(cq)) {
+ struct lock_list *lock;
+
+ __cq_dequeue(cq, (unsigned long *)&lock);
+
+ if (!lock->class) {
+ ret = -2;
+ goto exit;
+ }
+
+ if (forward)
+ head = &lock->class->locks_after;
+ else
+ head = &lock->class->locks_before;
+
+ list_for_each_entry(entry, head, entry) {
+ if (!lock_accessed(entry)) {
+ unsigned int cq_depth;
+ mark_lock_accessed(entry, lock);
+ if (match(entry, data)) {
+ *target_entry = entry;
+ ret = 0;
+ goto exit;
+ }
+
+ if (__cq_enqueue(cq, (unsigned long)entry)) {
+ ret = -1;
+ goto exit;
+ }
+ cq_depth = __cq_get_elem_count(cq);
+ if (max_bfs_queue_depth < cq_depth)
+ max_bfs_queue_depth = cq_depth;
+ }
+ }
+ }
+exit:
+ return ret;
+}
+
+static inline int __bfs_forwards(struct lock_list *src_entry,
+ void *data,
+ int (*match)(struct lock_list *entry, void *data),
+ struct lock_list **target_entry)
+{
+ return __bfs(src_entry, data, match, target_entry, 1);
+
+}
+
+static inline int __bfs_backwards(struct lock_list *src_entry,
+ void *data,
+ int (*match)(struct lock_list *entry, void *data),
+ struct lock_list **target_entry)
+{
+ return __bfs(src_entry, data, match, target_entry, 0);
+
+}
+
+/*
* Recursive, forwards-direction lock-dependency checking, used for
* both noncyclic checking and for hardirq-unsafe/softirq-unsafe
* checking.
- *
- * (to keep the stackframe of the recursive functions small we
- * use these global variables, and we also mark various helper
- * functions as noinline.)
*/
-static struct held_lock *check_source, *check_target;
/*
* Print a dependency chain entry (this is only done when a deadlock
* has been detected):
*/
static noinline int
-print_circular_bug_entry(struct lock_list *target, unsigned int depth)
+print_circular_bug_entry(struct lock_list *target, int depth)
{
if (debug_locks_silent)
return 0;
@@ -930,11 +1053,13 @@
* header first:
*/
static noinline int
-print_circular_bug_header(struct lock_list *entry, unsigned int depth)
+print_circular_bug_header(struct lock_list *entry, unsigned int depth,
+ struct held_lock *check_src,
+ struct held_lock *check_tgt)
{
struct task_struct *curr = current;
- if (!debug_locks_off_graph_unlock() || debug_locks_silent)
+ if (debug_locks_silent)
return 0;
printk("\n=======================================================\n");
@@ -943,9 +1068,9 @@
printk( "-------------------------------------------------------\n");
printk("%s/%d is trying to acquire lock:\n",
curr->comm, task_pid_nr(curr));
- print_lock(check_source);
+ print_lock(check_src);
printk("\nbut task is already holding lock:\n");
- print_lock(check_target);
+ print_lock(check_tgt);
printk("\nwhich lock already depends on the new lock.\n\n");
printk("\nthe existing dependency chain (in reverse order) is:\n");
@@ -954,19 +1079,36 @@
return 0;
}
-static noinline int print_circular_bug_tail(void)
+static inline int class_equal(struct lock_list *entry, void *data)
+{
+ return entry->class == data;
+}
+
+static noinline int print_circular_bug(struct lock_list *this,
+ struct lock_list *target,
+ struct held_lock *check_src,
+ struct held_lock *check_tgt)
{
struct task_struct *curr = current;
- struct lock_list this;
+ struct lock_list *parent;
+ int depth;
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
- this.class = hlock_class(check_source);
- if (!save_trace(&this.trace))
+ if (!save_trace(&this->trace))
return 0;
- print_circular_bug_entry(&this, 0);
+ depth = get_lock_depth(target);
+
+ print_circular_bug_header(target, depth, check_src, check_tgt);
+
+ parent = get_lock_parent(target);
+
+ while (parent) {
+ print_circular_bug_entry(parent, --depth);
+ parent = get_lock_parent(parent);
+ }
printk("\nother info that might help us debug this:\n\n");
lockdep_print_held_locks(curr);
@@ -977,73 +1119,69 @@
return 0;
}
-#define RECURSION_LIMIT 40
-
-static int noinline print_infinite_recursion_bug(void)
+static noinline int print_bfs_bug(int ret)
{
if (!debug_locks_off_graph_unlock())
return 0;
- WARN_ON(1);
+ WARN(1, "lockdep bfs error:%d\n", ret);
return 0;
}
-unsigned long __lockdep_count_forward_deps(struct lock_class *class,
- unsigned int depth)
+static int noop_count(struct lock_list *entry, void *data)
{
- struct lock_list *entry;
- unsigned long ret = 1;
-
- if (lockdep_dependency_visit(class, depth))
- return 0;
-
- /*
- * Recurse this class's dependency list:
- */
- list_for_each_entry(entry, &class->locks_after, entry)
- ret += __lockdep_count_forward_deps(entry->class, depth + 1);
-
- return ret;
+ (*(unsigned long *)data)++;
+ return 0;
}
+unsigned long __lockdep_count_forward_deps(struct lock_list *this)
+{
+ unsigned long count = 0;
+ struct lock_list *uninitialized_var(target_entry);
+
+ __bfs_forwards(this, (void *)&count, noop_count, &target_entry);
+
+ return count;
+}
unsigned long lockdep_count_forward_deps(struct lock_class *class)
{
unsigned long ret, flags;
+ struct lock_list this;
+
+ this.parent = NULL;
+ this.class = class;
local_irq_save(flags);
__raw_spin_lock(&lockdep_lock);
- ret = __lockdep_count_forward_deps(class, 0);
+ ret = __lockdep_count_forward_deps(&this);
__raw_spin_unlock(&lockdep_lock);
local_irq_restore(flags);
return ret;
}
-unsigned long __lockdep_count_backward_deps(struct lock_class *class,
- unsigned int depth)
+unsigned long __lockdep_count_backward_deps(struct lock_list *this)
{
- struct lock_list *entry;
- unsigned long ret = 1;
+ unsigned long count = 0;
+ struct lock_list *uninitialized_var(target_entry);
- if (lockdep_dependency_visit(class, depth))
- return 0;
- /*
- * Recurse this class's dependency list:
- */
- list_for_each_entry(entry, &class->locks_before, entry)
- ret += __lockdep_count_backward_deps(entry->class, depth + 1);
+ __bfs_backwards(this, (void *)&count, noop_count, &target_entry);
- return ret;
+ return count;
}
unsigned long lockdep_count_backward_deps(struct lock_class *class)
{
unsigned long ret, flags;
+ struct lock_list this;
+
+ this.parent = NULL;
+ this.class = class;
local_irq_save(flags);
__raw_spin_lock(&lockdep_lock);
- ret = __lockdep_count_backward_deps(class, 0);
+ ret = __lockdep_count_backward_deps(&this);
__raw_spin_unlock(&lockdep_lock);
local_irq_restore(flags);
@@ -1055,29 +1193,16 @@
* lead to <target>. Print an error and return 0 if it does.
*/
static noinline int
-check_noncircular(struct lock_class *source, unsigned int depth)
+check_noncircular(struct lock_list *root, struct lock_class *target,
+ struct lock_list **target_entry)
{
- struct lock_list *entry;
+ int result;
- if (lockdep_dependency_visit(source, depth))
- return 1;
+ debug_atomic_inc(&nr_cyclic_checks);
- debug_atomic_inc(&nr_cyclic_check_recursions);
- if (depth > max_recursion_depth)
- max_recursion_depth = depth;
- if (depth >= RECURSION_LIMIT)
- return print_infinite_recursion_bug();
- /*
- * Check this lock's dependency list:
- */
- list_for_each_entry(entry, &source->locks_after, entry) {
- if (entry->class == hlock_class(check_target))
- return print_circular_bug_header(entry, depth+1);
- debug_atomic_inc(&nr_cyclic_checks);
- if (!check_noncircular(entry->class, depth+1))
- return print_circular_bug_entry(entry, depth+1);
- }
- return 1;
+ result = __bfs_forwards(root, target, class_equal, target_entry);
+
+ return result;
}
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_PROVE_LOCKING)
@@ -1086,103 +1211,121 @@
* proving that two subgraphs can be connected by a new dependency
* without creating any illegal irq-safe -> irq-unsafe lock dependency.
*/
-static enum lock_usage_bit find_usage_bit;
-static struct lock_class *forwards_match, *backwards_match;
+
+static inline int usage_match(struct lock_list *entry, void *bit)
+{
+ return entry->class->usage_mask & (1 << (enum lock_usage_bit)bit);
+}
+
+
/*
* Find a node in the forwards-direction dependency sub-graph starting
- * at <source> that matches <find_usage_bit>.
+ * at @root->class that matches @bit.
*
- * Return 2 if such a node exists in the subgraph, and put that node
- * into <forwards_match>.
+ * Return 0 if such a node exists in the subgraph, and put that node
+ * into *@target_entry.
*
- * Return 1 otherwise and keep <forwards_match> unchanged.
- * Return 0 on error.
+ * Return 1 otherwise and keep *@target_entry unchanged.
+ * Return <0 on error.
*/
-static noinline int
-find_usage_forwards(struct lock_class *source, unsigned int depth)
+static int
+find_usage_forwards(struct lock_list *root, enum lock_usage_bit bit,
+ struct lock_list **target_entry)
{
- struct lock_list *entry;
- int ret;
-
- if (lockdep_dependency_visit(source, depth))
- return 1;
-
- if (depth > max_recursion_depth)
- max_recursion_depth = depth;
- if (depth >= RECURSION_LIMIT)
- return print_infinite_recursion_bug();
+ int result;
debug_atomic_inc(&nr_find_usage_forwards_checks);
- if (source->usage_mask & (1 << find_usage_bit)) {
- forwards_match = source;
- return 2;
- }
- /*
- * Check this lock's dependency list:
- */
- list_for_each_entry(entry, &source->locks_after, entry) {
- debug_atomic_inc(&nr_find_usage_forwards_recursions);
- ret = find_usage_forwards(entry->class, depth+1);
- if (ret == 2 || ret == 0)
- return ret;
- }
- return 1;
+ result = __bfs_forwards(root, (void *)bit, usage_match, target_entry);
+
+ return result;
}
/*
* Find a node in the backwards-direction dependency sub-graph starting
- * at <source> that matches <find_usage_bit>.
+ * at @root->class that matches @bit.
*
- * Return 2 if such a node exists in the subgraph, and put that node
- * into <backwards_match>.
+ * Return 0 if such a node exists in the subgraph, and put that node
+ * into *@target_entry.
*
- * Return 1 otherwise and keep <backwards_match> unchanged.
- * Return 0 on error.
+ * Return 1 otherwise and keep *@target_entry unchanged.
+ * Return <0 on error.
*/
-static noinline int
-find_usage_backwards(struct lock_class *source, unsigned int depth)
+static int
+find_usage_backwards(struct lock_list *root, enum lock_usage_bit bit,
+ struct lock_list **target_entry)
{
- struct lock_list *entry;
- int ret;
-
- if (lockdep_dependency_visit(source, depth))
- return 1;
-
- if (!__raw_spin_is_locked(&lockdep_lock))
- return DEBUG_LOCKS_WARN_ON(1);
-
- if (depth > max_recursion_depth)
- max_recursion_depth = depth;
- if (depth >= RECURSION_LIMIT)
- return print_infinite_recursion_bug();
+ int result;
debug_atomic_inc(&nr_find_usage_backwards_checks);
- if (source->usage_mask & (1 << find_usage_bit)) {
- backwards_match = source;
- return 2;
- }
- if (!source && debug_locks_off_graph_unlock()) {
- WARN_ON(1);
- return 0;
- }
+ result = __bfs_backwards(root, (void *)bit, usage_match, target_entry);
- /*
- * Check this lock's dependency list:
- */
- list_for_each_entry(entry, &source->locks_before, entry) {
- debug_atomic_inc(&nr_find_usage_backwards_recursions);
- ret = find_usage_backwards(entry->class, depth+1);
- if (ret == 2 || ret == 0)
- return ret;
+ return result;
+}
+
+static void print_lock_class_header(struct lock_class *class, int depth)
+{
+ int bit;
+
+ printk("%*s->", depth, "");
+ print_lock_name(class);
+ printk(" ops: %lu", class->ops);
+ printk(" {\n");
+
+ for (bit = 0; bit < LOCK_USAGE_STATES; bit++) {
+ if (class->usage_mask & (1 << bit)) {
+ int len = depth;
+
+ len += printk("%*s %s", depth, "", usage_str[bit]);
+ len += printk(" at:\n");
+ print_stack_trace(class->usage_traces + bit, len);
+ }
}
- return 1;
+ printk("%*s }\n", depth, "");
+
+ printk("%*s ... key at: ",depth,"");
+ print_ip_sym((unsigned long)class->key);
+}
+
+/*
+ * printk the shortest lock dependencies from @start to @end in reverse order:
+ */
+static void __used
+print_shortest_lock_dependencies(struct lock_list *leaf,
+ struct lock_list *root)
+{
+ struct lock_list *entry = leaf;
+ int depth;
+
+ /*compute depth from generated tree by BFS*/
+ depth = get_lock_depth(leaf);
+
+ do {
+ print_lock_class_header(entry->class, depth);
+ printk("%*s ... acquired at:\n", depth, "");
+ print_stack_trace(&entry->trace, 2);
+ printk("\n");
+
+ if (depth == 0 && (entry != root)) {
+ printk("lockdep:%s bad BFS generated tree\n", __func__);
+ break;
+ }
+
+ entry = get_lock_parent(entry);
+ depth--;
+ } while (entry && (depth >= 0));
+
+ return;
}
static int
print_bad_irq_dependency(struct task_struct *curr,
+ struct lock_list *prev_root,
+ struct lock_list *next_root,
+ struct lock_list *backwards_entry,
+ struct lock_list *forwards_entry,
struct held_lock *prev,
struct held_lock *next,
enum lock_usage_bit bit1,
@@ -1215,26 +1358,32 @@
printk("\nbut this new dependency connects a %s-irq-safe lock:\n",
irqclass);
- print_lock_name(backwards_match);
+ print_lock_name(backwards_entry->class);
printk("\n... which became %s-irq-safe at:\n", irqclass);
- print_stack_trace(backwards_match->usage_traces + bit1, 1);
+ print_stack_trace(backwards_entry->class->usage_traces + bit1, 1);
printk("\nto a %s-irq-unsafe lock:\n", irqclass);
- print_lock_name(forwards_match);
+ print_lock_name(forwards_entry->class);
printk("\n... which became %s-irq-unsafe at:\n", irqclass);
printk("...");
- print_stack_trace(forwards_match->usage_traces + bit2, 1);
+ print_stack_trace(forwards_entry->class->usage_traces + bit2, 1);
printk("\nother info that might help us debug this:\n\n");
lockdep_print_held_locks(curr);
- printk("\nthe %s-irq-safe lock's dependencies:\n", irqclass);
- print_lock_dependencies(backwards_match, 0);
+ printk("\nthe dependencies between %s-irq-safe lock", irqclass);
+ printk(" and the holding lock:\n");
+ if (!save_trace(&prev_root->trace))
+ return 0;
+ print_shortest_lock_dependencies(backwards_entry, prev_root);
- printk("\nthe %s-irq-unsafe lock's dependencies:\n", irqclass);
- print_lock_dependencies(forwards_match, 0);
+ printk("\nthe dependencies between the lock to be acquired");
+ printk(" and %s-irq-unsafe lock:\n", irqclass);
+ if (!save_trace(&next_root->trace))
+ return 0;
+ print_shortest_lock_dependencies(forwards_entry, next_root);
printk("\nstack backtrace:\n");
dump_stack();
@@ -1248,19 +1397,30 @@
enum lock_usage_bit bit_forwards, const char *irqclass)
{
int ret;
+ struct lock_list this, that;
+ struct lock_list *uninitialized_var(target_entry);
+ struct lock_list *uninitialized_var(target_entry1);
- find_usage_bit = bit_backwards;
- /* fills in <backwards_match> */
- ret = find_usage_backwards(hlock_class(prev), 0);
- if (!ret || ret == 1)
+ this.parent = NULL;
+
+ this.class = hlock_class(prev);
+ ret = find_usage_backwards(&this, bit_backwards, &target_entry);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- find_usage_bit = bit_forwards;
- ret = find_usage_forwards(hlock_class(next), 0);
- if (!ret || ret == 1)
+ that.parent = NULL;
+ that.class = hlock_class(next);
+ ret = find_usage_forwards(&that, bit_forwards, &target_entry1);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- /* ret == 2 */
- return print_bad_irq_dependency(curr, prev, next,
+
+ return print_bad_irq_dependency(curr, &this, &that,
+ target_entry, target_entry1,
+ prev, next,
bit_backwards, bit_forwards, irqclass);
}
@@ -1472,6 +1632,8 @@
{
struct lock_list *entry;
int ret;
+ struct lock_list this;
+ struct lock_list *uninitialized_var(target_entry);
/*
* Prove that the new <prev> -> <next> dependency would not
@@ -1482,10 +1644,13 @@
* We are using global variables to control the recursion, to
* keep the stackframe size of the recursive functions low:
*/
- check_source = next;
- check_target = prev;
- if (!(check_noncircular(hlock_class(next), 0)))
- return print_circular_bug_tail();
+ this.class = hlock_class(next);
+ this.parent = NULL;
+ ret = check_noncircular(&this, hlock_class(prev), &target_entry);
+ if (unlikely(!ret))
+ return print_circular_bug(&this, target_entry, next, prev);
+ else if (unlikely(ret < 0))
+ return print_bfs_bug(ret);
if (!check_prev_add_irq(curr, prev, next))
return 0;
@@ -1884,7 +2049,8 @@
* print irq inversion bug:
*/
static int
-print_irq_inversion_bug(struct task_struct *curr, struct lock_class *other,
+print_irq_inversion_bug(struct task_struct *curr,
+ struct lock_list *root, struct lock_list *other,
struct held_lock *this, int forwards,
const char *irqclass)
{
@@ -1902,17 +2068,16 @@
printk("but this lock took another, %s-unsafe lock in the past:\n", irqclass);
else
printk("but this lock was taken by another, %s-safe lock in the past:\n", irqclass);
- print_lock_name(other);
+ print_lock_name(other->class);
printk("\n\nand interrupts could create inverse lock ordering between them.\n\n");
printk("\nother info that might help us debug this:\n");
lockdep_print_held_locks(curr);
- printk("\nthe first lock's dependencies:\n");
- print_lock_dependencies(hlock_class(this), 0);
-
- printk("\nthe second lock's dependencies:\n");
- print_lock_dependencies(other, 0);
+ printk("\nthe shortest dependencies between 2nd lock and 1st lock:\n");
+ if (!save_trace(&root->trace))
+ return 0;
+ print_shortest_lock_dependencies(other, root);
printk("\nstack backtrace:\n");
dump_stack();
@@ -1929,14 +2094,19 @@
enum lock_usage_bit bit, const char *irqclass)
{
int ret;
+ struct lock_list root;
+ struct lock_list *uninitialized_var(target_entry);
- find_usage_bit = bit;
- /* fills in <forwards_match> */
- ret = find_usage_forwards(hlock_class(this), 0);
- if (!ret || ret == 1)
+ root.parent = NULL;
+ root.class = hlock_class(this);
+ ret = find_usage_forwards(&root, bit, &target_entry);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- return print_irq_inversion_bug(curr, forwards_match, this, 1, irqclass);
+ return print_irq_inversion_bug(curr, &root, target_entry,
+ this, 1, irqclass);
}
/*
@@ -1948,14 +2118,19 @@
enum lock_usage_bit bit, const char *irqclass)
{
int ret;
+ struct lock_list root;
+ struct lock_list *uninitialized_var(target_entry);
- find_usage_bit = bit;
- /* fills in <backwards_match> */
- ret = find_usage_backwards(hlock_class(this), 0);
- if (!ret || ret == 1)
+ root.parent = NULL;
+ root.class = hlock_class(this);
+ ret = find_usage_backwards(&root, bit, &target_entry);
+ if (ret < 0)
+ return print_bfs_bug(ret);
+ if (ret == 1)
return ret;
- return print_irq_inversion_bug(curr, backwards_match, this, 0, irqclass);
+ return print_irq_inversion_bug(curr, &root, target_entry,
+ this, 1, irqclass);
}
void print_irqtrace_events(struct task_struct *curr)
@@ -2530,13 +2705,15 @@
*/
static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
int trylock, int read, int check, int hardirqs_off,
- struct lockdep_map *nest_lock, unsigned long ip)
+ struct lockdep_map *nest_lock, unsigned long ip,
+ int references)
{
struct task_struct *curr = current;
struct lock_class *class = NULL;
struct held_lock *hlock;
unsigned int depth, id;
int chain_head = 0;
+ int class_idx;
u64 chain_key;
if (!prove_locking)
@@ -2584,10 +2761,24 @@
if (DEBUG_LOCKS_WARN_ON(depth >= MAX_LOCK_DEPTH))
return 0;
+ class_idx = class - lock_classes + 1;
+
+ if (depth) {
+ hlock = curr->held_locks + depth - 1;
+ if (hlock->class_idx == class_idx && nest_lock) {
+ if (hlock->references)
+ hlock->references++;
+ else
+ hlock->references = 2;
+
+ return 1;
+ }
+ }
+
hlock = curr->held_locks + depth;
if (DEBUG_LOCKS_WARN_ON(!class))
return 0;
- hlock->class_idx = class - lock_classes + 1;
+ hlock->class_idx = class_idx;
hlock->acquire_ip = ip;
hlock->instance = lock;
hlock->nest_lock = nest_lock;
@@ -2595,6 +2786,7 @@
hlock->read = read;
hlock->check = check;
hlock->hardirqs_off = !!hardirqs_off;
+ hlock->references = references;
#ifdef CONFIG_LOCK_STAT
hlock->waittime_stamp = 0;
hlock->holdtime_stamp = sched_clock();
@@ -2703,6 +2895,30 @@
return 1;
}
+static int match_held_lock(struct held_lock *hlock, struct lockdep_map *lock)
+{
+ if (hlock->instance == lock)
+ return 1;
+
+ if (hlock->references) {
+ struct lock_class *class = lock->class_cache;
+
+ if (!class)
+ class = look_up_lock_class(lock, 0);
+
+ if (DEBUG_LOCKS_WARN_ON(!class))
+ return 0;
+
+ if (DEBUG_LOCKS_WARN_ON(!hlock->nest_lock))
+ return 0;
+
+ if (hlock->class_idx == class - lock_classes + 1)
+ return 1;
+ }
+
+ return 0;
+}
+
static int
__lock_set_class(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, unsigned int subclass,
@@ -2726,7 +2942,7 @@
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
@@ -2745,7 +2961,8 @@
if (!__lock_acquire(hlock->instance,
hlock_class(hlock)->subclass, hlock->trylock,
hlock->read, hlock->check, hlock->hardirqs_off,
- hlock->nest_lock, hlock->acquire_ip))
+ hlock->nest_lock, hlock->acquire_ip,
+ hlock->references))
return 0;
}
@@ -2784,20 +3001,34 @@
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
return print_unlock_inbalance_bug(curr, lock, ip);
found_it:
- lock_release_holdtime(hlock);
+ if (hlock->instance == lock)
+ lock_release_holdtime(hlock);
+
+ if (hlock->references) {
+ hlock->references--;
+ if (hlock->references) {
+ /*
+ * We had, and after removing one, still have
+ * references, the current lock stack is still
+ * valid. We're done!
+ */
+ return 1;
+ }
+ }
/*
* We have the right lock to unlock, 'hlock' points to it.
* Now we remove it from the stack, and add back the other
* entries (if any), recalculating the hash along the way:
*/
+
curr->lockdep_depth = i;
curr->curr_chain_key = hlock->prev_chain_key;
@@ -2806,7 +3037,8 @@
if (!__lock_acquire(hlock->instance,
hlock_class(hlock)->subclass, hlock->trylock,
hlock->read, hlock->check, hlock->hardirqs_off,
- hlock->nest_lock, hlock->acquire_ip))
+ hlock->nest_lock, hlock->acquire_ip,
+ hlock->references))
return 0;
}
@@ -2836,7 +3068,7 @@
/*
* Is the unlock non-nested:
*/
- if (hlock->instance != lock)
+ if (hlock->instance != lock || hlock->references)
return lock_release_non_nested(curr, lock, ip);
curr->lockdep_depth--;
@@ -2881,6 +3113,21 @@
check_chain_key(curr);
}
+static int __lock_is_held(struct lockdep_map *lock)
+{
+ struct task_struct *curr = current;
+ int i;
+
+ for (i = 0; i < curr->lockdep_depth; i++) {
+ struct held_lock *hlock = curr->held_locks + i;
+
+ if (match_held_lock(hlock, lock))
+ return 1;
+ }
+
+ return 0;
+}
+
/*
* Check whether we follow the irq-flags state precisely:
*/
@@ -2957,7 +3204,7 @@
current->lockdep_recursion = 1;
__lock_acquire(lock, subclass, trylock, read, check,
- irqs_disabled_flags(flags), nest_lock, ip);
+ irqs_disabled_flags(flags), nest_lock, ip, 0);
current->lockdep_recursion = 0;
raw_local_irq_restore(flags);
}
@@ -2982,6 +3229,26 @@
}
EXPORT_SYMBOL_GPL(lock_release);
+int lock_is_held(struct lockdep_map *lock)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ if (unlikely(current->lockdep_recursion))
+ return ret;
+
+ raw_local_irq_save(flags);
+ check_flags(flags);
+
+ current->lockdep_recursion = 1;
+ ret = __lock_is_held(lock);
+ current->lockdep_recursion = 0;
+ raw_local_irq_restore(flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(lock_is_held);
+
void lockdep_set_current_reclaim_state(gfp_t gfp_mask)
{
current->lockdep_reclaim_gfp = gfp_mask;
@@ -3041,7 +3308,7 @@
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
@@ -3049,6 +3316,9 @@
return;
found_it:
+ if (hlock->instance != lock)
+ return;
+
hlock->waittime_stamp = sched_clock();
contention_point = lock_point(hlock_class(hlock)->contention_point, ip);
@@ -3088,7 +3358,7 @@
*/
if (prev_hlock && prev_hlock->irq_context != hlock->irq_context)
break;
- if (hlock->instance == lock)
+ if (match_held_lock(hlock, lock))
goto found_it;
prev_hlock = hlock;
}
@@ -3096,6 +3366,9 @@
return;
found_it:
+ if (hlock->instance != lock)
+ return;
+
cpu = smp_processor_id();
if (hlock->waittime_stamp) {
now = sched_clock();
@@ -3326,7 +3599,12 @@
sizeof(struct list_head) * CLASSHASH_SIZE +
sizeof(struct lock_list) * MAX_LOCKDEP_ENTRIES +
sizeof(struct lock_chain) * MAX_LOCKDEP_CHAINS +
- sizeof(struct list_head) * CHAINHASH_SIZE) / 1024);
+ sizeof(struct list_head) * CHAINHASH_SIZE
+#ifdef CONFIG_PROVE_LOCKING
+ + sizeof(struct circular_queue)
+#endif
+ ) / 1024
+ );
printk(" per task-struct memory footprint: %lu bytes\n",
sizeof(struct held_lock) * MAX_LOCK_DEPTH);
diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h
index 699a2ac..a2ee95a 100644
--- a/kernel/lockdep_internals.h
+++ b/kernel/lockdep_internals.h
@@ -91,6 +91,8 @@
extern unsigned int max_lockdep_depth;
extern unsigned int max_recursion_depth;
+extern unsigned int max_bfs_queue_depth;
+
#ifdef CONFIG_PROVE_LOCKING
extern unsigned long lockdep_count_forward_deps(struct lock_class *);
extern unsigned long lockdep_count_backward_deps(struct lock_class *);
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index e94caa6..d4b3dbc 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -25,38 +25,12 @@
static void *l_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct lock_class *class;
-
- (*pos)++;
-
- if (v == SEQ_START_TOKEN)
- class = m->private;
- else {
- class = v;
-
- if (class->lock_entry.next != &all_lock_classes)
- class = list_entry(class->lock_entry.next,
- struct lock_class, lock_entry);
- else
- class = NULL;
- }
-
- return class;
+ return seq_list_next(v, &all_lock_classes, pos);
}
static void *l_start(struct seq_file *m, loff_t *pos)
{
- struct lock_class *class;
- loff_t i = 0;
-
- if (*pos == 0)
- return SEQ_START_TOKEN;
-
- list_for_each_entry(class, &all_lock_classes, lock_entry) {
- if (++i == *pos)
- return class;
- }
- return NULL;
+ return seq_list_start_head(&all_lock_classes, *pos);
}
static void l_stop(struct seq_file *m, void *v)
@@ -82,11 +56,11 @@
static int l_show(struct seq_file *m, void *v)
{
- struct lock_class *class = v;
+ struct lock_class *class = list_entry(v, struct lock_class, lock_entry);
struct lock_list *entry;
char usage[LOCK_USAGE_CHARS];
- if (v == SEQ_START_TOKEN) {
+ if (v == &all_lock_classes) {
seq_printf(m, "all lock classes:\n");
return 0;
}
@@ -128,17 +102,7 @@
static int lockdep_open(struct inode *inode, struct file *file)
{
- int res = seq_open(file, &lockdep_ops);
- if (!res) {
- struct seq_file *m = file->private_data;
-
- if (!list_empty(&all_lock_classes))
- m->private = list_entry(all_lock_classes.next,
- struct lock_class, lock_entry);
- else
- m->private = NULL;
- }
- return res;
+ return seq_open(file, &lockdep_ops);
}
static const struct file_operations proc_lockdep_operations = {
@@ -149,37 +113,23 @@
};
#ifdef CONFIG_PROVE_LOCKING
-static void *lc_next(struct seq_file *m, void *v, loff_t *pos)
-{
- struct lock_chain *chain;
-
- (*pos)++;
-
- if (v == SEQ_START_TOKEN)
- chain = m->private;
- else {
- chain = v;
-
- if (*pos < nr_lock_chains)
- chain = lock_chains + *pos;
- else
- chain = NULL;
- }
-
- return chain;
-}
-
static void *lc_start(struct seq_file *m, loff_t *pos)
{
if (*pos == 0)
return SEQ_START_TOKEN;
- if (*pos < nr_lock_chains)
- return lock_chains + *pos;
+ if (*pos - 1 < nr_lock_chains)
+ return lock_chains + (*pos - 1);
return NULL;
}
+static void *lc_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return lc_start(m, pos);
+}
+
static void lc_stop(struct seq_file *m, void *v)
{
}
@@ -220,16 +170,7 @@
static int lockdep_chains_open(struct inode *inode, struct file *file)
{
- int res = seq_open(file, &lockdep_chains_ops);
- if (!res) {
- struct seq_file *m = file->private_data;
-
- if (nr_lock_chains)
- m->private = lock_chains;
- else
- m->private = NULL;
- }
- return res;
+ return seq_open(file, &lockdep_chains_ops);
}
static const struct file_operations proc_lockdep_chains_operations = {
@@ -258,16 +199,10 @@
debug_atomic_read(&chain_lookup_hits));
seq_printf(m, " cyclic checks: %11u\n",
debug_atomic_read(&nr_cyclic_checks));
- seq_printf(m, " cyclic-check recursions: %11u\n",
- debug_atomic_read(&nr_cyclic_check_recursions));
seq_printf(m, " find-mask forwards checks: %11u\n",
debug_atomic_read(&nr_find_usage_forwards_checks));
- seq_printf(m, " find-mask forwards recursions: %11u\n",
- debug_atomic_read(&nr_find_usage_forwards_recursions));
seq_printf(m, " find-mask backwards checks: %11u\n",
debug_atomic_read(&nr_find_usage_backwards_checks));
- seq_printf(m, " find-mask backwards recursions:%11u\n",
- debug_atomic_read(&nr_find_usage_backwards_recursions));
seq_printf(m, " hardirq on events: %11u\n", hi1);
seq_printf(m, " hardirq off events: %11u\n", hi2);
@@ -409,8 +344,10 @@
nr_unused);
seq_printf(m, " max locking depth: %11u\n",
max_lockdep_depth);
- seq_printf(m, " max recursion depth: %11u\n",
- max_recursion_depth);
+#ifdef CONFIG_PROVE_LOCKING
+ seq_printf(m, " max bfs queue depth: %11u\n",
+ max_bfs_queue_depth);
+#endif
lockdep_stats_debug_show(m);
seq_printf(m, " debug_locks: %11u\n",
debug_locks);
@@ -438,7 +375,6 @@
};
struct lock_stat_seq {
- struct lock_stat_data *iter;
struct lock_stat_data *iter_end;
struct lock_stat_data stats[MAX_LOCKDEP_KEYS];
};
@@ -626,34 +562,22 @@
static void *ls_start(struct seq_file *m, loff_t *pos)
{
struct lock_stat_seq *data = m->private;
+ struct lock_stat_data *iter;
if (*pos == 0)
return SEQ_START_TOKEN;
- data->iter = data->stats + *pos;
- if (data->iter >= data->iter_end)
- data->iter = NULL;
+ iter = data->stats + (*pos - 1);
+ if (iter >= data->iter_end)
+ iter = NULL;
- return data->iter;
+ return iter;
}
static void *ls_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct lock_stat_seq *data = m->private;
-
(*pos)++;
-
- if (v == SEQ_START_TOKEN)
- data->iter = data->stats;
- else {
- data->iter = v;
- data->iter++;
- }
-
- if (data->iter == data->iter_end)
- data->iter = NULL;
-
- return data->iter;
+ return ls_start(m, pos);
}
static void ls_stop(struct seq_file *m, void *v)
@@ -691,7 +615,6 @@
struct lock_stat_data *iter = data->stats;
struct seq_file *m = file->private_data;
- data->iter = iter;
list_for_each_entry(class, &all_lock_classes, lock_entry) {
iter->class = class;
iter->stats = lock_stats(class);
@@ -699,7 +622,7 @@
}
data->iter_end = iter;
- sort(data->stats, data->iter_end - data->iter,
+ sort(data->stats, data->iter_end - data->stats,
sizeof(struct lock_stat_data),
lock_stat_cmp, NULL);
@@ -734,7 +657,6 @@
struct seq_file *seq = file->private_data;
vfree(seq->private);
- seq->private = NULL;
return seq_release(inode, file);
}
diff --git a/kernel/module.c b/kernel/module.c
index fd141140..46580ed 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -55,6 +55,11 @@
#include <linux/percpu.h>
#include <linux/kmemleak.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/module.h>
+
+EXPORT_TRACEPOINT_SYMBOL(module_get);
+
#if 0
#define DEBUGP printk
#else
@@ -909,16 +914,18 @@
}
EXPORT_SYMBOL(__symbol_put);
+/* Note this assumes addr is a function, which it currently always is. */
void symbol_put_addr(void *addr)
{
struct module *modaddr;
+ unsigned long a = (unsigned long)dereference_function_descriptor(addr);
- if (core_kernel_text((unsigned long)addr))
+ if (core_kernel_text(a))
return;
/* module_text_address is safe here: we're supposed to have reference
* to module from symbol_get, so it can't go away. */
- modaddr = __module_text_address((unsigned long)addr);
+ modaddr = __module_text_address(a);
BUG_ON(!modaddr);
module_put(modaddr);
}
@@ -940,6 +947,8 @@
if (module) {
unsigned int cpu = get_cpu();
local_dec(__module_ref_addr(module, cpu));
+ trace_module_put(module, _RET_IP_,
+ local_read(__module_ref_addr(module, cpu)));
/* Maybe they're waiting for us to drop reference? */
if (unlikely(!module_is_live(module)))
wake_up_process(module->waiter);
@@ -1272,6 +1281,10 @@
struct module_notes_attrs *notes_attrs;
struct bin_attribute *nattr;
+ /* failed to create section attributes, so can't create notes */
+ if (!mod->sect_attrs)
+ return;
+
/* Count notes sections and allocate structures. */
notes = 0;
for (i = 0; i < nsect; i++)
@@ -1491,6 +1504,8 @@
/* Free a module, remove from lists, etc (must hold module_mutex). */
static void free_module(struct module *mod)
{
+ trace_module_free(mod);
+
/* Delete from various lists */
stop_machine(__unlink_module, mod, NULL);
remove_notes_attrs(mod);
@@ -2358,6 +2373,8 @@
/* Get rid of temporary copy */
vfree(hdr);
+ trace_module_load(mod);
+
/* Done! */
return mod;
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 36f65e2..e0d91fd 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -46,11 +46,17 @@
/*
* perf counter paranoia level:
- * 0 - not paranoid
- * 1 - disallow cpu counters to unpriv
- * 2 - disallow kernel profiling to unpriv
+ * -1 - not paranoid at all
+ * 0 - disallow raw tracepoint access for unpriv
+ * 1 - disallow cpu counters for unpriv
+ * 2 - disallow kernel profiling for unpriv
*/
-int sysctl_perf_counter_paranoid __read_mostly;
+int sysctl_perf_counter_paranoid __read_mostly = 1;
+
+static inline bool perf_paranoid_tracepoint_raw(void)
+{
+ return sysctl_perf_counter_paranoid > -1;
+}
static inline bool perf_paranoid_cpu(void)
{
@@ -469,7 +475,8 @@
struct perf_counter_context *ctx = counter->ctx;
u64 run_end;
- if (counter->state < PERF_COUNTER_STATE_INACTIVE)
+ if (counter->state < PERF_COUNTER_STATE_INACTIVE ||
+ counter->group_leader->state < PERF_COUNTER_STATE_INACTIVE)
return;
counter->total_time_enabled = ctx->time - counter->tstamp_enabled;
@@ -518,7 +525,7 @@
*/
if (counter->state >= PERF_COUNTER_STATE_INACTIVE) {
update_context_time(ctx);
- update_counter_times(counter);
+ update_group_times(counter);
if (counter == counter->group_leader)
group_sched_out(counter, cpuctx, ctx);
else
@@ -573,7 +580,7 @@
* in, so we can change the state safely.
*/
if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
- update_counter_times(counter);
+ update_group_times(counter);
counter->state = PERF_COUNTER_STATE_OFF;
}
@@ -851,6 +858,27 @@
}
/*
+ * Put a counter into inactive state and update time fields.
+ * Enabling the leader of a group effectively enables all
+ * the group members that aren't explicitly disabled, so we
+ * have to update their ->tstamp_enabled also.
+ * Note: this works for group members as well as group leaders
+ * since the non-leader members' sibling_lists will be empty.
+ */
+static void __perf_counter_mark_enabled(struct perf_counter *counter,
+ struct perf_counter_context *ctx)
+{
+ struct perf_counter *sub;
+
+ counter->state = PERF_COUNTER_STATE_INACTIVE;
+ counter->tstamp_enabled = ctx->time - counter->total_time_enabled;
+ list_for_each_entry(sub, &counter->sibling_list, list_entry)
+ if (sub->state >= PERF_COUNTER_STATE_INACTIVE)
+ sub->tstamp_enabled =
+ ctx->time - sub->total_time_enabled;
+}
+
+/*
* Cross CPU call to enable a performance counter
*/
static void __perf_counter_enable(void *info)
@@ -877,8 +905,7 @@
if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
goto unlock;
- counter->state = PERF_COUNTER_STATE_INACTIVE;
- counter->tstamp_enabled = ctx->time - counter->total_time_enabled;
+ __perf_counter_mark_enabled(counter, ctx);
/*
* If the counter is in a group and isn't the group leader,
@@ -971,11 +998,9 @@
* Since we have the lock this context can't be scheduled
* in, so we can change the state safely.
*/
- if (counter->state == PERF_COUNTER_STATE_OFF) {
- counter->state = PERF_COUNTER_STATE_INACTIVE;
- counter->tstamp_enabled =
- ctx->time - counter->total_time_enabled;
- }
+ if (counter->state == PERF_COUNTER_STATE_OFF)
+ __perf_counter_mark_enabled(counter, ctx);
+
out:
spin_unlock_irq(&ctx->lock);
}
@@ -1479,9 +1504,7 @@
counter->attr.enable_on_exec = 0;
if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
continue;
- counter->state = PERF_COUNTER_STATE_INACTIVE;
- counter->tstamp_enabled =
- ctx->time - counter->total_time_enabled;
+ __perf_counter_mark_enabled(counter, ctx);
enabled = 1;
}
@@ -1675,6 +1698,11 @@
atomic_dec(&nr_task_counters);
}
+ if (counter->output) {
+ fput(counter->output->filp);
+ counter->output = NULL;
+ }
+
if (counter->destroy)
counter->destroy(counter);
@@ -1791,7 +1819,7 @@
size += err;
list_for_each_entry(sub, &leader->sibling_list, list_entry) {
- err = perf_counter_read_entry(counter, read_format,
+ err = perf_counter_read_entry(sub, read_format,
buf + size);
if (err < 0)
return err;
@@ -1960,6 +1988,8 @@
return ret;
}
+int perf_counter_set_output(struct perf_counter *counter, int output_fd);
+
static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct perf_counter *counter = file->private_data;
@@ -1983,6 +2013,9 @@
case PERF_COUNTER_IOC_PERIOD:
return perf_counter_period(counter, (u64 __user *)arg);
+ case PERF_COUNTER_IOC_SET_OUTPUT:
+ return perf_counter_set_output(counter, arg);
+
default:
return -ENOTTY;
}
@@ -2253,6 +2286,11 @@
WARN_ON_ONCE(counter->ctx->parent_ctx);
mutex_lock(&counter->mmap_mutex);
+ if (counter->output) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
if (atomic_inc_not_zero(&counter->mmap_count)) {
if (nr_pages != counter->data->nr_pages)
ret = -EINVAL;
@@ -2638,6 +2676,7 @@
struct perf_counter *counter, unsigned int size,
int nmi, int sample)
{
+ struct perf_counter *output_counter;
struct perf_mmap_data *data;
unsigned int offset, head;
int have_lost;
@@ -2647,13 +2686,17 @@
u64 lost;
} lost_event;
+ rcu_read_lock();
/*
* For inherited counters we send all the output towards the parent.
*/
if (counter->parent)
counter = counter->parent;
- rcu_read_lock();
+ output_counter = rcu_dereference(counter->output);
+ if (output_counter)
+ counter = output_counter;
+
data = rcu_dereference(counter->data);
if (!data)
goto out;
@@ -3934,6 +3977,7 @@
* have these.
*/
if ((counter->attr.sample_type & PERF_SAMPLE_RAW) &&
+ perf_paranoid_tracepoint_raw() &&
!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
@@ -4066,6 +4110,7 @@
hwc->sample_period = attr->sample_period;
if (attr->freq && attr->sample_freq)
hwc->sample_period = 1;
+ hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
@@ -4201,6 +4246,57 @@
goto out;
}
+int perf_counter_set_output(struct perf_counter *counter, int output_fd)
+{
+ struct perf_counter *output_counter = NULL;
+ struct file *output_file = NULL;
+ struct perf_counter *old_output;
+ int fput_needed = 0;
+ int ret = -EINVAL;
+
+ if (!output_fd)
+ goto set;
+
+ output_file = fget_light(output_fd, &fput_needed);
+ if (!output_file)
+ return -EBADF;
+
+ if (output_file->f_op != &perf_fops)
+ goto out;
+
+ output_counter = output_file->private_data;
+
+ /* Don't chain output fds */
+ if (output_counter->output)
+ goto out;
+
+ /* Don't set an output fd when we already have an output channel */
+ if (counter->data)
+ goto out;
+
+ atomic_long_inc(&output_file->f_count);
+
+set:
+ mutex_lock(&counter->mmap_mutex);
+ old_output = counter->output;
+ rcu_assign_pointer(counter->output, output_counter);
+ mutex_unlock(&counter->mmap_mutex);
+
+ if (old_output) {
+ /*
+ * we need to make sure no existing perf_output_*()
+ * is still referencing this counter.
+ */
+ synchronize_rcu();
+ fput(old_output->filp);
+ }
+
+ ret = 0;
+out:
+ fput_light(output_file, fput_needed);
+ return ret;
+}
+
/**
* sys_perf_counter_open - open a performance counter, associate it to a task/cpu
*
@@ -4220,15 +4316,15 @@
struct file *group_file = NULL;
int fput_needed = 0;
int fput_needed2 = 0;
- int ret;
+ int err;
/* for future expandability... */
- if (flags)
+ if (flags & ~(PERF_FLAG_FD_NO_GROUP | PERF_FLAG_FD_OUTPUT))
return -EINVAL;
- ret = perf_copy_attr(attr_uptr, &attr);
- if (ret)
- return ret;
+ err = perf_copy_attr(attr_uptr, &attr);
+ if (err)
+ return err;
if (!attr.exclude_kernel) {
if (perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN))
@@ -4251,8 +4347,8 @@
* Look up the group leader (we will attach this counter to it):
*/
group_leader = NULL;
- if (group_fd != -1) {
- ret = -EINVAL;
+ if (group_fd != -1 && !(flags & PERF_FLAG_FD_NO_GROUP)) {
+ err = -EINVAL;
group_file = fget_light(group_fd, &fput_needed);
if (!group_file)
goto err_put_context;
@@ -4281,18 +4377,24 @@
counter = perf_counter_alloc(&attr, cpu, ctx, group_leader,
NULL, GFP_KERNEL);
- ret = PTR_ERR(counter);
+ err = PTR_ERR(counter);
if (IS_ERR(counter))
goto err_put_context;
- ret = anon_inode_getfd("[perf_counter]", &perf_fops, counter, 0);
- if (ret < 0)
+ err = anon_inode_getfd("[perf_counter]", &perf_fops, counter, 0);
+ if (err < 0)
goto err_free_put_context;
- counter_file = fget_light(ret, &fput_needed2);
+ counter_file = fget_light(err, &fput_needed2);
if (!counter_file)
goto err_free_put_context;
+ if (flags & PERF_FLAG_FD_OUTPUT) {
+ err = perf_counter_set_output(counter, group_fd);
+ if (err)
+ goto err_fput_free_put_context;
+ }
+
counter->filp = counter_file;
WARN_ON_ONCE(ctx->parent_ctx);
mutex_lock(&ctx->mutex);
@@ -4306,20 +4408,20 @@
list_add_tail(&counter->owner_entry, ¤t->perf_counter_list);
mutex_unlock(¤t->perf_counter_mutex);
+err_fput_free_put_context:
fput_light(counter_file, fput_needed2);
-out_fput:
- fput_light(group_file, fput_needed);
-
- return ret;
-
err_free_put_context:
- kfree(counter);
+ if (err < 0)
+ kfree(counter);
err_put_context:
- put_ctx(ctx);
+ if (err < 0)
+ put_ctx(ctx);
- goto out_fput;
+ fput_light(group_file, fput_needed);
+
+ return err;
}
/*
diff --git a/kernel/printk.c b/kernel/printk.c
index b4d97b5..602033a 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -37,6 +37,12 @@
#include <asm/uaccess.h>
/*
+ * for_each_console() allows you to iterate on each console
+ */
+#define for_each_console(con) \
+ for (con = console_drivers; con != NULL; con = con->next)
+
+/*
* Architectures can override it:
*/
void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...)
@@ -61,6 +67,8 @@
DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */
};
+static int saved_console_loglevel = -1;
+
/*
* Low level drivers may need that to know if they can schedule in
* their unblank() callback or not. So let's export it.
@@ -372,10 +380,15 @@
logged_chars = 0;
break;
case 6: /* Disable logging to console */
+ if (saved_console_loglevel == -1)
+ saved_console_loglevel = console_loglevel;
console_loglevel = minimum_console_loglevel;
break;
case 7: /* Enable logging to console */
- console_loglevel = default_console_loglevel;
+ if (saved_console_loglevel != -1) {
+ console_loglevel = saved_console_loglevel;
+ saved_console_loglevel = -1;
+ }
break;
case 8: /* Set level of messages printed to console */
error = -EINVAL;
@@ -384,6 +397,8 @@
if (len < minimum_console_loglevel)
len = minimum_console_loglevel;
console_loglevel = len;
+ /* Implicitly re-enable logging to console */
+ saved_console_loglevel = -1;
error = 0;
break;
case 9: /* Number of chars in the log buffer */
@@ -412,7 +427,7 @@
{
struct console *con;
- for (con = console_drivers; con; con = con->next) {
+ for_each_console(con) {
if ((con->flags & CON_ENABLED) && con->write &&
(cpu_online(smp_processor_id()) ||
(con->flags & CON_ANYTIME)))
@@ -544,7 +559,7 @@
{
struct console *con;
- for (con = console_drivers; con; con = con->next)
+ for_each_console(con)
if (con->flags & CON_ANYTIME)
return 1;
@@ -1060,12 +1075,6 @@
}
EXPORT_SYMBOL(console_conditional_schedule);
-void console_print(const char *s)
-{
- printk(KERN_EMERG "%s", s);
-}
-EXPORT_SYMBOL(console_print);
-
void console_unblank(void)
{
struct console *c;
@@ -1082,7 +1091,7 @@
console_locked = 1;
console_may_schedule = 0;
- for (c = console_drivers; c != NULL; c = c->next)
+ for_each_console(c)
if ((c->flags & CON_ENABLED) && c->unblank)
c->unblank();
release_console_sem();
@@ -1097,7 +1106,7 @@
struct tty_driver *driver = NULL;
acquire_console_sem();
- for (c = console_drivers; c != NULL; c = c->next) {
+ for_each_console(c) {
if (!c->device)
continue;
driver = c->device(c, index);
@@ -1134,25 +1143,49 @@
* to register the console printing procedure with printk() and to
* print any messages that were printed by the kernel before the
* console driver was initialized.
+ *
+ * This can happen pretty early during the boot process (because of
+ * early_printk) - sometimes before setup_arch() completes - be careful
+ * of what kernel features are used - they may not be initialised yet.
+ *
+ * There are two types of consoles - bootconsoles (early_printk) and
+ * "real" consoles (everything which is not a bootconsole) which are
+ * handled differently.
+ * - Any number of bootconsoles can be registered at any time.
+ * - As soon as a "real" console is registered, all bootconsoles
+ * will be unregistered automatically.
+ * - Once a "real" console is registered, any attempt to register a
+ * bootconsoles will be rejected
*/
-void register_console(struct console *console)
+void register_console(struct console *newcon)
{
int i;
unsigned long flags;
- struct console *bootconsole = NULL;
+ struct console *bcon = NULL;
- if (console_drivers) {
- if (console->flags & CON_BOOT)
- return;
- if (console_drivers->flags & CON_BOOT)
- bootconsole = console_drivers;
+ /*
+ * before we register a new CON_BOOT console, make sure we don't
+ * already have a valid console
+ */
+ if (console_drivers && newcon->flags & CON_BOOT) {
+ /* find the last or real console */
+ for_each_console(bcon) {
+ if (!(bcon->flags & CON_BOOT)) {
+ printk(KERN_INFO "Too late to register bootconsole %s%d\n",
+ newcon->name, newcon->index);
+ return;
+ }
+ }
}
- if (preferred_console < 0 || bootconsole || !console_drivers)
+ if (console_drivers && console_drivers->flags & CON_BOOT)
+ bcon = console_drivers;
+
+ if (preferred_console < 0 || bcon || !console_drivers)
preferred_console = selected_console;
- if (console->early_setup)
- console->early_setup();
+ if (newcon->early_setup)
+ newcon->early_setup();
/*
* See if we want to use this console driver. If we
@@ -1160,13 +1193,13 @@
* that registers here.
*/
if (preferred_console < 0) {
- if (console->index < 0)
- console->index = 0;
- if (console->setup == NULL ||
- console->setup(console, NULL) == 0) {
- console->flags |= CON_ENABLED;
- if (console->device) {
- console->flags |= CON_CONSDEV;
+ if (newcon->index < 0)
+ newcon->index = 0;
+ if (newcon->setup == NULL ||
+ newcon->setup(newcon, NULL) == 0) {
+ newcon->flags |= CON_ENABLED;
+ if (newcon->device) {
+ newcon->flags |= CON_CONSDEV;
preferred_console = 0;
}
}
@@ -1178,64 +1211,62 @@
*/
for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0];
i++) {
- if (strcmp(console_cmdline[i].name, console->name) != 0)
+ if (strcmp(console_cmdline[i].name, newcon->name) != 0)
continue;
- if (console->index >= 0 &&
- console->index != console_cmdline[i].index)
+ if (newcon->index >= 0 &&
+ newcon->index != console_cmdline[i].index)
continue;
- if (console->index < 0)
- console->index = console_cmdline[i].index;
+ if (newcon->index < 0)
+ newcon->index = console_cmdline[i].index;
#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
if (console_cmdline[i].brl_options) {
- console->flags |= CON_BRL;
- braille_register_console(console,
+ newcon->flags |= CON_BRL;
+ braille_register_console(newcon,
console_cmdline[i].index,
console_cmdline[i].options,
console_cmdline[i].brl_options);
return;
}
#endif
- if (console->setup &&
- console->setup(console, console_cmdline[i].options) != 0)
+ if (newcon->setup &&
+ newcon->setup(newcon, console_cmdline[i].options) != 0)
break;
- console->flags |= CON_ENABLED;
- console->index = console_cmdline[i].index;
+ newcon->flags |= CON_ENABLED;
+ newcon->index = console_cmdline[i].index;
if (i == selected_console) {
- console->flags |= CON_CONSDEV;
+ newcon->flags |= CON_CONSDEV;
preferred_console = selected_console;
}
break;
}
- if (!(console->flags & CON_ENABLED))
+ if (!(newcon->flags & CON_ENABLED))
return;
- if (bootconsole && (console->flags & CON_CONSDEV)) {
- printk(KERN_INFO "console handover: boot [%s%d] -> real [%s%d]\n",
- bootconsole->name, bootconsole->index,
- console->name, console->index);
- unregister_console(bootconsole);
- console->flags &= ~CON_PRINTBUFFER;
- } else {
- printk(KERN_INFO "console [%s%d] enabled\n",
- console->name, console->index);
- }
+ /*
+ * If we have a bootconsole, and are switching to a real console,
+ * don't print everything out again, since when the boot console, and
+ * the real console are the same physical device, it's annoying to
+ * see the beginning boot messages twice
+ */
+ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV))
+ newcon->flags &= ~CON_PRINTBUFFER;
/*
* Put this console in the list - keep the
* preferred driver at the head of the list.
*/
acquire_console_sem();
- if ((console->flags & CON_CONSDEV) || console_drivers == NULL) {
- console->next = console_drivers;
- console_drivers = console;
- if (console->next)
- console->next->flags &= ~CON_CONSDEV;
+ if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) {
+ newcon->next = console_drivers;
+ console_drivers = newcon;
+ if (newcon->next)
+ newcon->next->flags &= ~CON_CONSDEV;
} else {
- console->next = console_drivers->next;
- console_drivers->next = console;
+ newcon->next = console_drivers->next;
+ console_drivers->next = newcon;
}
- if (console->flags & CON_PRINTBUFFER) {
+ if (newcon->flags & CON_PRINTBUFFER) {
/*
* release_console_sem() will print out the buffered messages
* for us.
@@ -1245,6 +1276,28 @@
spin_unlock_irqrestore(&logbuf_lock, flags);
}
release_console_sem();
+
+ /*
+ * By unregistering the bootconsoles after we enable the real console
+ * we get the "console xxx enabled" message on all the consoles -
+ * boot consoles, real consoles, etc - this is to ensure that end
+ * users know there might be something in the kernel's log buffer that
+ * went to the bootconsole (that they do not see on the real console)
+ */
+ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) {
+ /* we need to iterate through twice, to make sure we print
+ * everything out, before we unregister the console(s)
+ */
+ printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n",
+ newcon->name, newcon->index);
+ for_each_console(bcon)
+ if (bcon->flags & CON_BOOT)
+ unregister_console(bcon);
+ } else {
+ printk(KERN_INFO "%sconsole [%s%d] enabled\n",
+ (newcon->flags & CON_BOOT) ? "boot" : "" ,
+ newcon->name, newcon->index);
+ }
}
EXPORT_SYMBOL(register_console);
@@ -1287,11 +1340,13 @@
static int __init disable_boot_consoles(void)
{
- if (console_drivers != NULL) {
- if (console_drivers->flags & CON_BOOT) {
+ struct console *con;
+
+ for_each_console(con) {
+ if (con->flags & CON_BOOT) {
printk(KERN_INFO "turn off boot console %s%d\n",
- console_drivers->name, console_drivers->index);
- return unregister_console(console_drivers);
+ con->name, con->index);
+ unregister_console(con);
}
}
return 0;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 082c320..307c285 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -152,7 +152,7 @@
if (!dumpable && !capable(CAP_SYS_PTRACE))
return -EPERM;
- return security_ptrace_may_access(task, mode);
+ return security_ptrace_access_check(task, mode);
}
bool ptrace_may_access(struct task_struct *task, unsigned int mode)
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
deleted file mode 100644
index 0f2b0b3..0000000
--- a/kernel/rcuclassic.c
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2001
- *
- * Authors: Dipankar Sarma <dipankar@in.ibm.com>
- * Manfred Spraul <manfred@colorfullife.com>
- *
- * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/rcupdate.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/completion.h>
-#include <linux/moduleparam.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/time.h>
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static struct lock_class_key rcu_lock_key;
-struct lockdep_map rcu_lock_map =
- STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
-EXPORT_SYMBOL_GPL(rcu_lock_map);
-#endif
-
-
-/* Definition for rcupdate control block. */
-static struct rcu_ctrlblk rcu_ctrlblk = {
- .cur = -300,
- .completed = -300,
- .pending = -300,
- .lock = __SPIN_LOCK_UNLOCKED(&rcu_ctrlblk.lock),
- .cpumask = CPU_BITS_NONE,
-};
-
-static struct rcu_ctrlblk rcu_bh_ctrlblk = {
- .cur = -300,
- .completed = -300,
- .pending = -300,
- .lock = __SPIN_LOCK_UNLOCKED(&rcu_bh_ctrlblk.lock),
- .cpumask = CPU_BITS_NONE,
-};
-
-static DEFINE_PER_CPU(struct rcu_data, rcu_data);
-static DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
-
-/*
- * Increment the quiescent state counter.
- * The counter is a bit degenerated: We do not need to know
- * how many quiescent states passed, just if there was at least
- * one since the start of the grace period. Thus just a flag.
- */
-void rcu_qsctr_inc(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- rdp->passed_quiesc = 1;
-}
-
-void rcu_bh_qsctr_inc(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
- rdp->passed_quiesc = 1;
-}
-
-static int blimit = 10;
-static int qhimark = 10000;
-static int qlowmark = 100;
-
-#ifdef CONFIG_SMP
-static void force_quiescent_state(struct rcu_data *rdp,
- struct rcu_ctrlblk *rcp)
-{
- int cpu;
- unsigned long flags;
-
- set_need_resched();
- spin_lock_irqsave(&rcp->lock, flags);
- if (unlikely(!rcp->signaled)) {
- rcp->signaled = 1;
- /*
- * Don't send IPI to itself. With irqs disabled,
- * rdp->cpu is the current cpu.
- *
- * cpu_online_mask is updated by the _cpu_down()
- * using __stop_machine(). Since we're in irqs disabled
- * section, __stop_machine() is not exectuting, hence
- * the cpu_online_mask is stable.
- *
- * However, a cpu might have been offlined _just_ before
- * we disabled irqs while entering here.
- * And rcu subsystem might not yet have handled the CPU_DEAD
- * notification, leading to the offlined cpu's bit
- * being set in the rcp->cpumask.
- *
- * Hence cpumask = (rcp->cpumask & cpu_online_mask) to prevent
- * sending smp_reschedule() to an offlined CPU.
- */
- for_each_cpu_and(cpu,
- to_cpumask(rcp->cpumask), cpu_online_mask) {
- if (cpu != rdp->cpu)
- smp_send_reschedule(cpu);
- }
- }
- spin_unlock_irqrestore(&rcp->lock, flags);
-}
-#else
-static inline void force_quiescent_state(struct rcu_data *rdp,
- struct rcu_ctrlblk *rcp)
-{
- set_need_resched();
-}
-#endif
-
-static void __call_rcu(struct rcu_head *head, struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- long batch;
-
- head->next = NULL;
- smp_mb(); /* Read of rcu->cur must happen after any change by caller. */
-
- /*
- * Determine the batch number of this callback.
- *
- * Using ACCESS_ONCE to avoid the following error when gcc eliminates
- * local variable "batch" and emits codes like this:
- * 1) rdp->batch = rcp->cur + 1 # gets old value
- * ......
- * 2)rcu_batch_after(rcp->cur + 1, rdp->batch) # gets new value
- * then [*nxttail[0], *nxttail[1]) may contain callbacks
- * that batch# = rdp->batch, see the comment of struct rcu_data.
- */
- batch = ACCESS_ONCE(rcp->cur) + 1;
-
- if (rdp->nxtlist && rcu_batch_after(batch, rdp->batch)) {
- /* process callbacks */
- rdp->nxttail[0] = rdp->nxttail[1];
- rdp->nxttail[1] = rdp->nxttail[2];
- if (rcu_batch_after(batch - 1, rdp->batch))
- rdp->nxttail[0] = rdp->nxttail[2];
- }
-
- rdp->batch = batch;
- *rdp->nxttail[2] = head;
- rdp->nxttail[2] = &head->next;
-
- if (unlikely(++rdp->qlen > qhimark)) {
- rdp->blimit = INT_MAX;
- force_quiescent_state(rdp, &rcu_ctrlblk);
- }
-}
-
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
-
-static void record_gp_stall_check_time(struct rcu_ctrlblk *rcp)
-{
- rcp->gp_start = jiffies;
- rcp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_CHECK;
-}
-
-static void print_other_cpu_stall(struct rcu_ctrlblk *rcp)
-{
- int cpu;
- long delta;
- unsigned long flags;
-
- /* Only let one CPU complain about others per time interval. */
-
- spin_lock_irqsave(&rcp->lock, flags);
- delta = jiffies - rcp->jiffies_stall;
- if (delta < 2 || rcp->cur != rcp->completed) {
- spin_unlock_irqrestore(&rcp->lock, flags);
- return;
- }
- rcp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
- spin_unlock_irqrestore(&rcp->lock, flags);
-
- /* OK, time to rat on our buddy... */
-
- printk(KERN_ERR "INFO: RCU detected CPU stalls:");
- for_each_possible_cpu(cpu) {
- if (cpumask_test_cpu(cpu, to_cpumask(rcp->cpumask)))
- printk(" %d", cpu);
- }
- printk(" (detected by %d, t=%ld jiffies)\n",
- smp_processor_id(), (long)(jiffies - rcp->gp_start));
-}
-
-static void print_cpu_stall(struct rcu_ctrlblk *rcp)
-{
- unsigned long flags;
-
- printk(KERN_ERR "INFO: RCU detected CPU %d stall (t=%lu/%lu jiffies)\n",
- smp_processor_id(), jiffies,
- jiffies - rcp->gp_start);
- dump_stack();
- spin_lock_irqsave(&rcp->lock, flags);
- if ((long)(jiffies - rcp->jiffies_stall) >= 0)
- rcp->jiffies_stall =
- jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
- spin_unlock_irqrestore(&rcp->lock, flags);
- set_need_resched(); /* kick ourselves to get things going. */
-}
-
-static void check_cpu_stall(struct rcu_ctrlblk *rcp)
-{
- long delta;
-
- delta = jiffies - rcp->jiffies_stall;
- if (cpumask_test_cpu(smp_processor_id(), to_cpumask(rcp->cpumask)) &&
- delta >= 0) {
-
- /* We haven't checked in, so go dump stack. */
- print_cpu_stall(rcp);
-
- } else if (rcp->cur != rcp->completed && delta >= 2) {
-
- /* They had two seconds to dump stack, so complain. */
- print_other_cpu_stall(rcp);
- }
-}
-
-#else /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-static void record_gp_stall_check_time(struct rcu_ctrlblk *rcp)
-{
-}
-
-static inline void check_cpu_stall(struct rcu_ctrlblk *rcp)
-{
-}
-
-#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-
-/**
- * call_rcu - Queue an RCU callback for invocation after a grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual update function to be invoked after the grace period
- *
- * The update function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. RCU read-side critical
- * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
- * and may be nested.
- */
-void call_rcu(struct rcu_head *head,
- void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
-
- head->func = func;
- local_irq_save(flags);
- __call_rcu(head, &rcu_ctrlblk, &__get_cpu_var(rcu_data));
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL_GPL(call_rcu);
-
-/**
- * call_rcu_bh - Queue an RCU for invocation after a quicker grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual update function to be invoked after the grace period
- *
- * The update function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. call_rcu_bh() assumes
- * that the read-side critical sections end on completion of a softirq
- * handler. This means that read-side critical sections in process
- * context must not be interrupted by softirqs. This interface is to be
- * used when most of the read-side critical sections are in softirq context.
- * RCU read-side critical sections are delimited by rcu_read_lock() and
- * rcu_read_unlock(), * if in interrupt context or rcu_read_lock_bh()
- * and rcu_read_unlock_bh(), if in process context. These may be nested.
- */
-void call_rcu_bh(struct rcu_head *head,
- void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
-
- head->func = func;
- local_irq_save(flags);
- __call_rcu(head, &rcu_bh_ctrlblk, &__get_cpu_var(rcu_bh_data));
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL_GPL(call_rcu_bh);
-
-/*
- * Return the number of RCU batches processed thus far. Useful
- * for debug and statistics.
- */
-long rcu_batches_completed(void)
-{
- return rcu_ctrlblk.completed;
-}
-EXPORT_SYMBOL_GPL(rcu_batches_completed);
-
-/*
- * Return the number of RCU batches processed thus far. Useful
- * for debug and statistics.
- */
-long rcu_batches_completed_bh(void)
-{
- return rcu_bh_ctrlblk.completed;
-}
-EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
-
-/* Raises the softirq for processing rcu_callbacks. */
-static inline void raise_rcu_softirq(void)
-{
- raise_softirq(RCU_SOFTIRQ);
-}
-
-/*
- * Invoke the completed RCU callbacks. They are expected to be in
- * a per-cpu list.
- */
-static void rcu_do_batch(struct rcu_data *rdp)
-{
- unsigned long flags;
- struct rcu_head *next, *list;
- int count = 0;
-
- list = rdp->donelist;
- while (list) {
- next = list->next;
- prefetch(next);
- list->func(list);
- list = next;
- if (++count >= rdp->blimit)
- break;
- }
- rdp->donelist = list;
-
- local_irq_save(flags);
- rdp->qlen -= count;
- local_irq_restore(flags);
- if (rdp->blimit == INT_MAX && rdp->qlen <= qlowmark)
- rdp->blimit = blimit;
-
- if (!rdp->donelist)
- rdp->donetail = &rdp->donelist;
- else
- raise_rcu_softirq();
-}
-
-/*
- * Grace period handling:
- * The grace period handling consists out of two steps:
- * - A new grace period is started.
- * This is done by rcu_start_batch. The start is not broadcasted to
- * all cpus, they must pick this up by comparing rcp->cur with
- * rdp->quiescbatch. All cpus are recorded in the
- * rcu_ctrlblk.cpumask bitmap.
- * - All cpus must go through a quiescent state.
- * Since the start of the grace period is not broadcasted, at least two
- * calls to rcu_check_quiescent_state are required:
- * The first call just notices that a new grace period is running. The
- * following calls check if there was a quiescent state since the beginning
- * of the grace period. If so, it updates rcu_ctrlblk.cpumask. If
- * the bitmap is empty, then the grace period is completed.
- * rcu_check_quiescent_state calls rcu_start_batch(0) to start the next grace
- * period (if necessary).
- */
-
-/*
- * Register a new batch of callbacks, and start it up if there is currently no
- * active batch and the batch to be registered has not already occurred.
- * Caller must hold rcu_ctrlblk.lock.
- */
-static void rcu_start_batch(struct rcu_ctrlblk *rcp)
-{
- if (rcp->cur != rcp->pending &&
- rcp->completed == rcp->cur) {
- rcp->cur++;
- record_gp_stall_check_time(rcp);
-
- /*
- * Accessing nohz_cpu_mask before incrementing rcp->cur needs a
- * Barrier Otherwise it can cause tickless idle CPUs to be
- * included in rcp->cpumask, which will extend graceperiods
- * unnecessarily.
- */
- smp_mb();
- cpumask_andnot(to_cpumask(rcp->cpumask),
- cpu_online_mask, nohz_cpu_mask);
-
- rcp->signaled = 0;
- }
-}
-
-/*
- * cpu went through a quiescent state since the beginning of the grace period.
- * Clear it from the cpu mask and complete the grace period if it was the last
- * cpu. Start another grace period if someone has further entries pending
- */
-static void cpu_quiet(int cpu, struct rcu_ctrlblk *rcp)
-{
- cpumask_clear_cpu(cpu, to_cpumask(rcp->cpumask));
- if (cpumask_empty(to_cpumask(rcp->cpumask))) {
- /* batch completed ! */
- rcp->completed = rcp->cur;
- rcu_start_batch(rcp);
- }
-}
-
-/*
- * Check if the cpu has gone through a quiescent state (say context
- * switch). If so and if it already hasn't done so in this RCU
- * quiescent cycle, then indicate that it has done so.
- */
-static void rcu_check_quiescent_state(struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- unsigned long flags;
-
- if (rdp->quiescbatch != rcp->cur) {
- /* start new grace period: */
- rdp->qs_pending = 1;
- rdp->passed_quiesc = 0;
- rdp->quiescbatch = rcp->cur;
- return;
- }
-
- /* Grace period already completed for this cpu?
- * qs_pending is checked instead of the actual bitmap to avoid
- * cacheline trashing.
- */
- if (!rdp->qs_pending)
- return;
-
- /*
- * Was there a quiescent state since the beginning of the grace
- * period? If no, then exit and wait for the next call.
- */
- if (!rdp->passed_quiesc)
- return;
- rdp->qs_pending = 0;
-
- spin_lock_irqsave(&rcp->lock, flags);
- /*
- * rdp->quiescbatch/rcp->cur and the cpu bitmap can come out of sync
- * during cpu startup. Ignore the quiescent state.
- */
- if (likely(rdp->quiescbatch == rcp->cur))
- cpu_quiet(rdp->cpu, rcp);
-
- spin_unlock_irqrestore(&rcp->lock, flags);
-}
-
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* warning! helper for rcu_offline_cpu. do not use elsewhere without reviewing
- * locking requirements, the list it's pulling from has to belong to a cpu
- * which is dead and hence not processing interrupts.
- */
-static void rcu_move_batch(struct rcu_data *this_rdp, struct rcu_head *list,
- struct rcu_head **tail, long batch)
-{
- unsigned long flags;
-
- if (list) {
- local_irq_save(flags);
- this_rdp->batch = batch;
- *this_rdp->nxttail[2] = list;
- this_rdp->nxttail[2] = tail;
- local_irq_restore(flags);
- }
-}
-
-static void __rcu_offline_cpu(struct rcu_data *this_rdp,
- struct rcu_ctrlblk *rcp, struct rcu_data *rdp)
-{
- unsigned long flags;
-
- /*
- * if the cpu going offline owns the grace period
- * we can block indefinitely waiting for it, so flush
- * it here
- */
- spin_lock_irqsave(&rcp->lock, flags);
- if (rcp->cur != rcp->completed)
- cpu_quiet(rdp->cpu, rcp);
- rcu_move_batch(this_rdp, rdp->donelist, rdp->donetail, rcp->cur + 1);
- rcu_move_batch(this_rdp, rdp->nxtlist, rdp->nxttail[2], rcp->cur + 1);
- spin_unlock(&rcp->lock);
-
- this_rdp->qlen += rdp->qlen;
- local_irq_restore(flags);
-}
-
-static void rcu_offline_cpu(int cpu)
-{
- struct rcu_data *this_rdp = &get_cpu_var(rcu_data);
- struct rcu_data *this_bh_rdp = &get_cpu_var(rcu_bh_data);
-
- __rcu_offline_cpu(this_rdp, &rcu_ctrlblk,
- &per_cpu(rcu_data, cpu));
- __rcu_offline_cpu(this_bh_rdp, &rcu_bh_ctrlblk,
- &per_cpu(rcu_bh_data, cpu));
- put_cpu_var(rcu_data);
- put_cpu_var(rcu_bh_data);
-}
-
-#else
-
-static void rcu_offline_cpu(int cpu)
-{
-}
-
-#endif
-
-/*
- * This does the RCU processing work from softirq context.
- */
-static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- unsigned long flags;
- long completed_snap;
-
- if (rdp->nxtlist) {
- local_irq_save(flags);
- completed_snap = ACCESS_ONCE(rcp->completed);
-
- /*
- * move the other grace-period-completed entries to
- * [rdp->nxtlist, *rdp->nxttail[0]) temporarily
- */
- if (!rcu_batch_before(completed_snap, rdp->batch))
- rdp->nxttail[0] = rdp->nxttail[1] = rdp->nxttail[2];
- else if (!rcu_batch_before(completed_snap, rdp->batch - 1))
- rdp->nxttail[0] = rdp->nxttail[1];
-
- /*
- * the grace period for entries in
- * [rdp->nxtlist, *rdp->nxttail[0]) has completed and
- * move these entries to donelist
- */
- if (rdp->nxttail[0] != &rdp->nxtlist) {
- *rdp->donetail = rdp->nxtlist;
- rdp->donetail = rdp->nxttail[0];
- rdp->nxtlist = *rdp->nxttail[0];
- *rdp->donetail = NULL;
-
- if (rdp->nxttail[1] == rdp->nxttail[0])
- rdp->nxttail[1] = &rdp->nxtlist;
- if (rdp->nxttail[2] == rdp->nxttail[0])
- rdp->nxttail[2] = &rdp->nxtlist;
- rdp->nxttail[0] = &rdp->nxtlist;
- }
-
- local_irq_restore(flags);
-
- if (rcu_batch_after(rdp->batch, rcp->pending)) {
- unsigned long flags2;
-
- /* and start it/schedule start if it's a new batch */
- spin_lock_irqsave(&rcp->lock, flags2);
- if (rcu_batch_after(rdp->batch, rcp->pending)) {
- rcp->pending = rdp->batch;
- rcu_start_batch(rcp);
- }
- spin_unlock_irqrestore(&rcp->lock, flags2);
- }
- }
-
- rcu_check_quiescent_state(rcp, rdp);
- if (rdp->donelist)
- rcu_do_batch(rdp);
-}
-
-static void rcu_process_callbacks(struct softirq_action *unused)
-{
- /*
- * Memory references from any prior RCU read-side critical sections
- * executed by the interrupted code must be see before any RCU
- * grace-period manupulations below.
- */
-
- smp_mb(); /* See above block comment. */
-
- __rcu_process_callbacks(&rcu_ctrlblk, &__get_cpu_var(rcu_data));
- __rcu_process_callbacks(&rcu_bh_ctrlblk, &__get_cpu_var(rcu_bh_data));
-
- /*
- * Memory references from any later RCU read-side critical sections
- * executed by the interrupted code must be see after any RCU
- * grace-period manupulations above.
- */
-
- smp_mb(); /* See above block comment. */
-}
-
-static int __rcu_pending(struct rcu_ctrlblk *rcp, struct rcu_data *rdp)
-{
- /* Check for CPU stalls, if enabled. */
- check_cpu_stall(rcp);
-
- if (rdp->nxtlist) {
- long completed_snap = ACCESS_ONCE(rcp->completed);
-
- /*
- * This cpu has pending rcu entries and the grace period
- * for them has completed.
- */
- if (!rcu_batch_before(completed_snap, rdp->batch))
- return 1;
- if (!rcu_batch_before(completed_snap, rdp->batch - 1) &&
- rdp->nxttail[0] != rdp->nxttail[1])
- return 1;
- if (rdp->nxttail[0] != &rdp->nxtlist)
- return 1;
-
- /*
- * This cpu has pending rcu entries and the new batch
- * for then hasn't been started nor scheduled start
- */
- if (rcu_batch_after(rdp->batch, rcp->pending))
- return 1;
- }
-
- /* This cpu has finished callbacks to invoke */
- if (rdp->donelist)
- return 1;
-
- /* The rcu core waits for a quiescent state from the cpu */
- if (rdp->quiescbatch != rcp->cur || rdp->qs_pending)
- return 1;
-
- /* nothing to do */
- return 0;
-}
-
-/*
- * Check to see if there is any immediate RCU-related work to be done
- * by the current CPU, returning 1 if so. This function is part of the
- * RCU implementation; it is -not- an exported member of the RCU API.
- */
-int rcu_pending(int cpu)
-{
- return __rcu_pending(&rcu_ctrlblk, &per_cpu(rcu_data, cpu)) ||
- __rcu_pending(&rcu_bh_ctrlblk, &per_cpu(rcu_bh_data, cpu));
-}
-
-/*
- * Check to see if any future RCU-related work will need to be done
- * by the current CPU, even if none need be done immediately, returning
- * 1 if so. This function is part of the RCU implementation; it is -not-
- * an exported member of the RCU API.
- */
-int rcu_needs_cpu(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- struct rcu_data *rdp_bh = &per_cpu(rcu_bh_data, cpu);
-
- return !!rdp->nxtlist || !!rdp_bh->nxtlist || rcu_pending(cpu);
-}
-
-/*
- * Top-level function driving RCU grace-period detection, normally
- * invoked from the scheduler-clock interrupt. This function simply
- * increments counters that are read only from softirq by this same
- * CPU, so there are no memory barriers required.
- */
-void rcu_check_callbacks(int cpu, int user)
-{
- if (user ||
- (idle_cpu(cpu) && rcu_scheduler_active &&
- !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
-
- /*
- * Get here if this CPU took its interrupt from user
- * mode or from the idle loop, and if this is not a
- * nested interrupt. In this case, the CPU is in
- * a quiescent state, so count it.
- *
- * Also do a memory barrier. This is needed to handle
- * the case where writes from a preempt-disable section
- * of code get reordered into schedule() by this CPU's
- * write buffer. The memory barrier makes sure that
- * the rcu_qsctr_inc() and rcu_bh_qsctr_inc() are see
- * by other CPUs to happen after any such write.
- */
-
- smp_mb(); /* See above block comment. */
- rcu_qsctr_inc(cpu);
- rcu_bh_qsctr_inc(cpu);
-
- } else if (!in_softirq()) {
-
- /*
- * Get here if this CPU did not take its interrupt from
- * softirq, in other words, if it is not interrupting
- * a rcu_bh read-side critical section. This is an _bh
- * critical section, so count it. The memory barrier
- * is needed for the same reason as is the above one.
- */
-
- smp_mb(); /* See above block comment. */
- rcu_bh_qsctr_inc(cpu);
- }
- raise_rcu_softirq();
-}
-
-static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
- struct rcu_data *rdp)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&rcp->lock, flags);
- memset(rdp, 0, sizeof(*rdp));
- rdp->nxttail[0] = rdp->nxttail[1] = rdp->nxttail[2] = &rdp->nxtlist;
- rdp->donetail = &rdp->donelist;
- rdp->quiescbatch = rcp->completed;
- rdp->qs_pending = 0;
- rdp->cpu = cpu;
- rdp->blimit = blimit;
- spin_unlock_irqrestore(&rcp->lock, flags);
-}
-
-static void __cpuinit rcu_online_cpu(int cpu)
-{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- struct rcu_data *bh_rdp = &per_cpu(rcu_bh_data, cpu);
-
- rcu_init_percpu_data(cpu, &rcu_ctrlblk, rdp);
- rcu_init_percpu_data(cpu, &rcu_bh_ctrlblk, bh_rdp);
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
-}
-
-static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- long cpu = (long)hcpu;
-
- switch (action) {
- case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
- rcu_online_cpu(cpu);
- break;
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
- rcu_offline_cpu(cpu);
- break;
- default:
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata rcu_nb = {
- .notifier_call = rcu_cpu_notify,
-};
-
-/*
- * Initializes rcu mechanism. Assumed to be called early.
- * That is before local timer(SMP) or jiffie timer (uniproc) is setup.
- * Note that rcu_qsctr and friends are implicitly
- * initialized due to the choice of ``0'' for RCU_CTR_INVALID.
- */
-void __init __rcu_init(void)
-{
-#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
- printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
-#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
- rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE,
- (void *)(long)smp_processor_id());
- /* Register notifier for non-boot CPUs */
- register_cpu_notifier(&rcu_nb);
-}
-
-module_param(blimit, int, 0);
-module_param(qhimark, int, 0);
-module_param(qlowmark, int, 0);
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index a967c9f..bd5d5c8 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -98,6 +98,30 @@
}
EXPORT_SYMBOL_GPL(synchronize_rcu);
+/**
+ * synchronize_rcu_bh - wait until an rcu_bh grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full rcu_bh grace
+ * period has elapsed, in other words after all currently executing rcu_bh
+ * read-side critical sections have completed. RCU read-side critical
+ * sections are delimited by rcu_read_lock_bh() and rcu_read_unlock_bh(),
+ * and may be nested.
+ */
+void synchronize_rcu_bh(void)
+{
+ struct rcu_synchronize rcu;
+
+ if (rcu_blocking_is_gp())
+ return;
+
+ init_completion(&rcu.completion);
+ /* Will wake me after RCU finished. */
+ call_rcu_bh(&rcu.head, wakeme_after_rcu);
+ /* Wait for it. */
+ wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
+
static void rcu_barrier_callback(struct rcu_head *notused)
{
if (atomic_dec_and_test(&rcu_barrier_cpu_count))
@@ -129,6 +153,7 @@
static inline void wait_migrated_callbacks(void)
{
wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+ smp_mb(); /* In case we didn't sleep. */
}
/*
@@ -192,9 +217,13 @@
wake_up(&rcu_migrate_wq);
}
+extern int rcu_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu);
+
static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
unsigned long action, void *hcpu)
{
+ rcu_cpu_notify(self, action, hcpu);
if (action == CPU_DYING) {
/*
* preempt_disable() in on_each_cpu() prevents stop_machine(),
@@ -209,7 +238,8 @@
call_rcu_bh(rcu_migrate_head, rcu_migrate_callback);
call_rcu_sched(rcu_migrate_head + 1, rcu_migrate_callback);
call_rcu(rcu_migrate_head + 2, rcu_migrate_callback);
- } else if (action == CPU_POST_DEAD) {
+ } else if (action == CPU_DOWN_PREPARE) {
+ /* Don't need to wait until next removal operation. */
/* rcu_migrate_head is protected by cpu_add_remove_lock */
wait_migrated_callbacks();
}
@@ -219,8 +249,18 @@
void __init rcu_init(void)
{
+ int i;
+
__rcu_init();
- hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
+ cpu_notifier(rcu_barrier_cpu_hotplug, 0);
+
+ /*
+ * We don't need protection against CPU-hotplug here because
+ * this is called early in boot, before either interrupts
+ * or the scheduler are operational.
+ */
+ for_each_online_cpu(i)
+ rcu_barrier_cpu_hotplug(NULL, CPU_UP_PREPARE, (void *)(long)i);
}
void rcu_scheduler_starting(void)
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
deleted file mode 100644
index beb0e65..0000000
--- a/kernel/rcupreempt.c
+++ /dev/null
@@ -1,1539 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion, realtime implementation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2006
- *
- * Authors: Paul E. McKenney <paulmck@us.ibm.com>
- * With thanks to Esben Nielsen, Bill Huey, and Ingo Molnar
- * for pushing me away from locks and towards counters, and
- * to Suparna Bhattacharya for pushing me completely away
- * from atomic instructions on the read side.
- *
- * - Added handling of Dynamic Ticks
- * Copyright 2007 - Paul E. Mckenney <paulmck@us.ibm.com>
- * - Steven Rostedt <srostedt@redhat.com>
- *
- * Papers: http://www.rdrop.com/users/paulmck/RCU
- *
- * Design Document: http://lwn.net/Articles/253651/
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU/ *.txt
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/rcupdate.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kthread.h>
-#include <linux/completion.h>
-#include <linux/moduleparam.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/cpumask.h>
-#include <linux/rcupreempt_trace.h>
-#include <asm/byteorder.h>
-
-/*
- * PREEMPT_RCU data structures.
- */
-
-/*
- * GP_STAGES specifies the number of times the state machine has
- * to go through the all the rcu_try_flip_states (see below)
- * in a single Grace Period.
- *
- * GP in GP_STAGES stands for Grace Period ;)
- */
-#define GP_STAGES 2
-struct rcu_data {
- spinlock_t lock; /* Protect rcu_data fields. */
- long completed; /* Number of last completed batch. */
- int waitlistcount;
- struct rcu_head *nextlist;
- struct rcu_head **nexttail;
- struct rcu_head *waitlist[GP_STAGES];
- struct rcu_head **waittail[GP_STAGES];
- struct rcu_head *donelist; /* from waitlist & waitschedlist */
- struct rcu_head **donetail;
- long rcu_flipctr[2];
- struct rcu_head *nextschedlist;
- struct rcu_head **nextschedtail;
- struct rcu_head *waitschedlist;
- struct rcu_head **waitschedtail;
- int rcu_sched_sleeping;
-#ifdef CONFIG_RCU_TRACE
- struct rcupreempt_trace trace;
-#endif /* #ifdef CONFIG_RCU_TRACE */
-};
-
-/*
- * States for rcu_try_flip() and friends.
- */
-
-enum rcu_try_flip_states {
-
- /*
- * Stay here if nothing is happening. Flip the counter if somthing
- * starts happening. Denoted by "I"
- */
- rcu_try_flip_idle_state,
-
- /*
- * Wait here for all CPUs to notice that the counter has flipped. This
- * prevents the old set of counters from ever being incremented once
- * we leave this state, which in turn is necessary because we cannot
- * test any individual counter for zero -- we can only check the sum.
- * Denoted by "A".
- */
- rcu_try_flip_waitack_state,
-
- /*
- * Wait here for the sum of the old per-CPU counters to reach zero.
- * Denoted by "Z".
- */
- rcu_try_flip_waitzero_state,
-
- /*
- * Wait here for each of the other CPUs to execute a memory barrier.
- * This is necessary to ensure that these other CPUs really have
- * completed executing their RCU read-side critical sections, despite
- * their CPUs wildly reordering memory. Denoted by "M".
- */
- rcu_try_flip_waitmb_state,
-};
-
-/*
- * States for rcu_ctrlblk.rcu_sched_sleep.
- */
-
-enum rcu_sched_sleep_states {
- rcu_sched_not_sleeping, /* Not sleeping, callbacks need GP. */
- rcu_sched_sleep_prep, /* Thinking of sleeping, rechecking. */
- rcu_sched_sleeping, /* Sleeping, awaken if GP needed. */
-};
-
-struct rcu_ctrlblk {
- spinlock_t fliplock; /* Protect state-machine transitions. */
- long completed; /* Number of last completed batch. */
- enum rcu_try_flip_states rcu_try_flip_state; /* The current state of
- the rcu state machine */
- spinlock_t schedlock; /* Protect rcu_sched sleep state. */
- enum rcu_sched_sleep_states sched_sleep; /* rcu_sched state. */
- wait_queue_head_t sched_wq; /* Place for rcu_sched to sleep. */
-};
-
-struct rcu_dyntick_sched {
- int dynticks;
- int dynticks_snap;
- int sched_qs;
- int sched_qs_snap;
- int sched_dynticks_snap;
-};
-
-static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_dyntick_sched, rcu_dyntick_sched) = {
- .dynticks = 1,
-};
-
-void rcu_qsctr_inc(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->sched_qs++;
-}
-
-#ifdef CONFIG_NO_HZ
-
-void rcu_enter_nohz(void)
-{
- static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
-
- smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
- __get_cpu_var(rcu_dyntick_sched).dynticks++;
- WARN_ON_RATELIMIT(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1, &rs);
-}
-
-void rcu_exit_nohz(void)
-{
- static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
-
- __get_cpu_var(rcu_dyntick_sched).dynticks++;
- smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
- WARN_ON_RATELIMIT(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1),
- &rs);
-}
-
-#endif /* CONFIG_NO_HZ */
-
-
-static DEFINE_PER_CPU(struct rcu_data, rcu_data);
-
-static struct rcu_ctrlblk rcu_ctrlblk = {
- .fliplock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.fliplock),
- .completed = 0,
- .rcu_try_flip_state = rcu_try_flip_idle_state,
- .schedlock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.schedlock),
- .sched_sleep = rcu_sched_not_sleeping,
- .sched_wq = __WAIT_QUEUE_HEAD_INITIALIZER(rcu_ctrlblk.sched_wq),
-};
-
-static struct task_struct *rcu_sched_grace_period_task;
-
-#ifdef CONFIG_RCU_TRACE
-static char *rcu_try_flip_state_names[] =
- { "idle", "waitack", "waitzero", "waitmb" };
-#endif /* #ifdef CONFIG_RCU_TRACE */
-
-static DECLARE_BITMAP(rcu_cpu_online_map, NR_CPUS) __read_mostly
- = CPU_BITS_NONE;
-
-/*
- * Enum and per-CPU flag to determine when each CPU has seen
- * the most recent counter flip.
- */
-
-enum rcu_flip_flag_values {
- rcu_flip_seen, /* Steady/initial state, last flip seen. */
- /* Only GP detector can update. */
- rcu_flipped /* Flip just completed, need confirmation. */
- /* Only corresponding CPU can update. */
-};
-static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_flip_flag_values, rcu_flip_flag)
- = rcu_flip_seen;
-
-/*
- * Enum and per-CPU flag to determine when each CPU has executed the
- * needed memory barrier to fence in memory references from its last RCU
- * read-side critical section in the just-completed grace period.
- */
-
-enum rcu_mb_flag_values {
- rcu_mb_done, /* Steady/initial state, no mb()s required. */
- /* Only GP detector can update. */
- rcu_mb_needed /* Flip just completed, need an mb(). */
- /* Only corresponding CPU can update. */
-};
-static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_mb_flag_values, rcu_mb_flag)
- = rcu_mb_done;
-
-/*
- * RCU_DATA_ME: find the current CPU's rcu_data structure.
- * RCU_DATA_CPU: find the specified CPU's rcu_data structure.
- */
-#define RCU_DATA_ME() (&__get_cpu_var(rcu_data))
-#define RCU_DATA_CPU(cpu) (&per_cpu(rcu_data, cpu))
-
-/*
- * Helper macro for tracing when the appropriate rcu_data is not
- * cached in a local variable, but where the CPU number is so cached.
- */
-#define RCU_TRACE_CPU(f, cpu) RCU_TRACE(f, &(RCU_DATA_CPU(cpu)->trace));
-
-/*
- * Helper macro for tracing when the appropriate rcu_data is not
- * cached in a local variable.
- */
-#define RCU_TRACE_ME(f) RCU_TRACE(f, &(RCU_DATA_ME()->trace));
-
-/*
- * Helper macro for tracing when the appropriate rcu_data is pointed
- * to by a local variable.
- */
-#define RCU_TRACE_RDP(f, rdp) RCU_TRACE(f, &((rdp)->trace));
-
-#define RCU_SCHED_BATCH_TIME (HZ / 50)
-
-/*
- * Return the number of RCU batches processed thus far. Useful
- * for debug and statistics.
- */
-long rcu_batches_completed(void)
-{
- return rcu_ctrlblk.completed;
-}
-EXPORT_SYMBOL_GPL(rcu_batches_completed);
-
-void __rcu_read_lock(void)
-{
- int idx;
- struct task_struct *t = current;
- int nesting;
-
- nesting = ACCESS_ONCE(t->rcu_read_lock_nesting);
- if (nesting != 0) {
-
- /* An earlier rcu_read_lock() covers us, just count it. */
-
- t->rcu_read_lock_nesting = nesting + 1;
-
- } else {
- unsigned long flags;
-
- /*
- * We disable interrupts for the following reasons:
- * - If we get scheduling clock interrupt here, and we
- * end up acking the counter flip, it's like a promise
- * that we will never increment the old counter again.
- * Thus we will break that promise if that
- * scheduling clock interrupt happens between the time
- * we pick the .completed field and the time that we
- * increment our counter.
- *
- * - We don't want to be preempted out here.
- *
- * NMIs can still occur, of course, and might themselves
- * contain rcu_read_lock().
- */
-
- local_irq_save(flags);
-
- /*
- * Outermost nesting of rcu_read_lock(), so increment
- * the current counter for the current CPU. Use volatile
- * casts to prevent the compiler from reordering.
- */
-
- idx = ACCESS_ONCE(rcu_ctrlblk.completed) & 0x1;
- ACCESS_ONCE(RCU_DATA_ME()->rcu_flipctr[idx])++;
-
- /*
- * Now that the per-CPU counter has been incremented, we
- * are protected from races with rcu_read_lock() invoked
- * from NMI handlers on this CPU. We can therefore safely
- * increment the nesting counter, relieving further NMIs
- * of the need to increment the per-CPU counter.
- */
-
- ACCESS_ONCE(t->rcu_read_lock_nesting) = nesting + 1;
-
- /*
- * Now that we have preventing any NMIs from storing
- * to the ->rcu_flipctr_idx, we can safely use it to
- * remember which counter to decrement in the matching
- * rcu_read_unlock().
- */
-
- ACCESS_ONCE(t->rcu_flipctr_idx) = idx;
- local_irq_restore(flags);
- }
-}
-EXPORT_SYMBOL_GPL(__rcu_read_lock);
-
-void __rcu_read_unlock(void)
-{
- int idx;
- struct task_struct *t = current;
- int nesting;
-
- nesting = ACCESS_ONCE(t->rcu_read_lock_nesting);
- if (nesting > 1) {
-
- /*
- * We are still protected by the enclosing rcu_read_lock(),
- * so simply decrement the counter.
- */
-
- t->rcu_read_lock_nesting = nesting - 1;
-
- } else {
- unsigned long flags;
-
- /*
- * Disable local interrupts to prevent the grace-period
- * detection state machine from seeing us half-done.
- * NMIs can still occur, of course, and might themselves
- * contain rcu_read_lock() and rcu_read_unlock().
- */
-
- local_irq_save(flags);
-
- /*
- * Outermost nesting of rcu_read_unlock(), so we must
- * decrement the current counter for the current CPU.
- * This must be done carefully, because NMIs can
- * occur at any point in this code, and any rcu_read_lock()
- * and rcu_read_unlock() pairs in the NMI handlers
- * must interact non-destructively with this code.
- * Lots of volatile casts, and -very- careful ordering.
- *
- * Changes to this code, including this one, must be
- * inspected, validated, and tested extremely carefully!!!
- */
-
- /*
- * First, pick up the index.
- */
-
- idx = ACCESS_ONCE(t->rcu_flipctr_idx);
-
- /*
- * Now that we have fetched the counter index, it is
- * safe to decrement the per-task RCU nesting counter.
- * After this, any interrupts or NMIs will increment and
- * decrement the per-CPU counters.
- */
- ACCESS_ONCE(t->rcu_read_lock_nesting) = nesting - 1;
-
- /*
- * It is now safe to decrement this task's nesting count.
- * NMIs that occur after this statement will route their
- * rcu_read_lock() calls through this "else" clause, and
- * will thus start incrementing the per-CPU counter on
- * their own. They will also clobber ->rcu_flipctr_idx,
- * but that is OK, since we have already fetched it.
- */
-
- ACCESS_ONCE(RCU_DATA_ME()->rcu_flipctr[idx])--;
- local_irq_restore(flags);
- }
-}
-EXPORT_SYMBOL_GPL(__rcu_read_unlock);
-
-/*
- * If a global counter flip has occurred since the last time that we
- * advanced callbacks, advance them. Hardware interrupts must be
- * disabled when calling this function.
- */
-static void __rcu_advance_callbacks(struct rcu_data *rdp)
-{
- int cpu;
- int i;
- int wlc = 0;
-
- if (rdp->completed != rcu_ctrlblk.completed) {
- if (rdp->waitlist[GP_STAGES - 1] != NULL) {
- *rdp->donetail = rdp->waitlist[GP_STAGES - 1];
- rdp->donetail = rdp->waittail[GP_STAGES - 1];
- RCU_TRACE_RDP(rcupreempt_trace_move2done, rdp);
- }
- for (i = GP_STAGES - 2; i >= 0; i--) {
- if (rdp->waitlist[i] != NULL) {
- rdp->waitlist[i + 1] = rdp->waitlist[i];
- rdp->waittail[i + 1] = rdp->waittail[i];
- wlc++;
- } else {
- rdp->waitlist[i + 1] = NULL;
- rdp->waittail[i + 1] =
- &rdp->waitlist[i + 1];
- }
- }
- if (rdp->nextlist != NULL) {
- rdp->waitlist[0] = rdp->nextlist;
- rdp->waittail[0] = rdp->nexttail;
- wlc++;
- rdp->nextlist = NULL;
- rdp->nexttail = &rdp->nextlist;
- RCU_TRACE_RDP(rcupreempt_trace_move2wait, rdp);
- } else {
- rdp->waitlist[0] = NULL;
- rdp->waittail[0] = &rdp->waitlist[0];
- }
- rdp->waitlistcount = wlc;
- rdp->completed = rcu_ctrlblk.completed;
- }
-
- /*
- * Check to see if this CPU needs to report that it has seen
- * the most recent counter flip, thereby declaring that all
- * subsequent rcu_read_lock() invocations will respect this flip.
- */
-
- cpu = raw_smp_processor_id();
- if (per_cpu(rcu_flip_flag, cpu) == rcu_flipped) {
- smp_mb(); /* Subsequent counter accesses must see new value */
- per_cpu(rcu_flip_flag, cpu) = rcu_flip_seen;
- smp_mb(); /* Subsequent RCU read-side critical sections */
- /* seen -after- acknowledgement. */
- }
-}
-
-#ifdef CONFIG_NO_HZ
-static DEFINE_PER_CPU(int, rcu_update_flag);
-
-/**
- * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI.
- *
- * If the CPU was idle with dynamic ticks active, this updates the
- * rcu_dyntick_sched.dynticks to let the RCU handling know that the
- * CPU is active.
- */
-void rcu_irq_enter(void)
-{
- int cpu = smp_processor_id();
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- if (per_cpu(rcu_update_flag, cpu))
- per_cpu(rcu_update_flag, cpu)++;
-
- /*
- * Only update if we are coming from a stopped ticks mode
- * (rcu_dyntick_sched.dynticks is even).
- */
- if (!in_interrupt() &&
- (rdssp->dynticks & 0x1) == 0) {
- /*
- * The following might seem like we could have a race
- * with NMI/SMIs. But this really isn't a problem.
- * Here we do a read/modify/write, and the race happens
- * when an NMI/SMI comes in after the read and before
- * the write. But NMI/SMIs will increment this counter
- * twice before returning, so the zero bit will not
- * be corrupted by the NMI/SMI which is the most important
- * part.
- *
- * The only thing is that we would bring back the counter
- * to a postion that it was in during the NMI/SMI.
- * But the zero bit would be set, so the rest of the
- * counter would again be ignored.
- *
- * On return from the IRQ, the counter may have the zero
- * bit be 0 and the counter the same as the return from
- * the NMI/SMI. If the state machine was so unlucky to
- * see that, it still doesn't matter, since all
- * RCU read-side critical sections on this CPU would
- * have already completed.
- */
- rdssp->dynticks++;
- /*
- * The following memory barrier ensures that any
- * rcu_read_lock() primitives in the irq handler
- * are seen by other CPUs to follow the above
- * increment to rcu_dyntick_sched.dynticks. This is
- * required in order for other CPUs to correctly
- * determine when it is safe to advance the RCU
- * grace-period state machine.
- */
- smp_mb(); /* see above block comment. */
- /*
- * Since we can't determine the dynamic tick mode from
- * the rcu_dyntick_sched.dynticks after this routine,
- * we use a second flag to acknowledge that we came
- * from an idle state with ticks stopped.
- */
- per_cpu(rcu_update_flag, cpu)++;
- /*
- * If we take an NMI/SMI now, they will also increment
- * the rcu_update_flag, and will not update the
- * rcu_dyntick_sched.dynticks on exit. That is for
- * this IRQ to do.
- */
- }
-}
-
-/**
- * rcu_irq_exit - Called from exiting Hard irq context.
- *
- * If the CPU was idle with dynamic ticks active, update the
- * rcu_dyntick_sched.dynticks to put let the RCU handling be
- * aware that the CPU is going back to idle with no ticks.
- */
-void rcu_irq_exit(void)
-{
- int cpu = smp_processor_id();
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- /*
- * rcu_update_flag is set if we interrupted the CPU
- * when it was idle with ticks stopped.
- * Once this occurs, we keep track of interrupt nesting
- * because a NMI/SMI could also come in, and we still
- * only want the IRQ that started the increment of the
- * rcu_dyntick_sched.dynticks to be the one that modifies
- * it on exit.
- */
- if (per_cpu(rcu_update_flag, cpu)) {
- if (--per_cpu(rcu_update_flag, cpu))
- return;
-
- /* This must match the interrupt nesting */
- WARN_ON(in_interrupt());
-
- /*
- * If an NMI/SMI happens now we are still
- * protected by the rcu_dyntick_sched.dynticks being odd.
- */
-
- /*
- * The following memory barrier ensures that any
- * rcu_read_unlock() primitives in the irq handler
- * are seen by other CPUs to preceed the following
- * increment to rcu_dyntick_sched.dynticks. This
- * is required in order for other CPUs to determine
- * when it is safe to advance the RCU grace-period
- * state machine.
- */
- smp_mb(); /* see above block comment. */
- rdssp->dynticks++;
- WARN_ON(rdssp->dynticks & 0x1);
- }
-}
-
-void rcu_nmi_enter(void)
-{
- rcu_irq_enter();
-}
-
-void rcu_nmi_exit(void)
-{
- rcu_irq_exit();
-}
-
-static void dyntick_save_progress_counter(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->dynticks_snap = rdssp->dynticks;
-}
-
-static inline int
-rcu_try_flip_waitack_needed(int cpu)
-{
- long curr;
- long snap;
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- curr = rdssp->dynticks;
- snap = rdssp->dynticks_snap;
- smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
-
- /*
- * If the CPU remained in dynticks mode for the entire time
- * and didn't take any interrupts, NMIs, SMIs, or whatever,
- * then it cannot be in the middle of an rcu_read_lock(), so
- * the next rcu_read_lock() it executes must use the new value
- * of the counter. So we can safely pretend that this CPU
- * already acknowledged the counter.
- */
-
- if ((curr == snap) && ((curr & 0x1) == 0))
- return 0;
-
- /*
- * If the CPU passed through or entered a dynticks idle phase with
- * no active irq handlers, then, as above, we can safely pretend
- * that this CPU already acknowledged the counter.
- */
-
- if ((curr - snap) > 2 || (curr & 0x1) == 0)
- return 0;
-
- /* We need this CPU to explicitly acknowledge the counter flip. */
-
- return 1;
-}
-
-static inline int
-rcu_try_flip_waitmb_needed(int cpu)
-{
- long curr;
- long snap;
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- curr = rdssp->dynticks;
- snap = rdssp->dynticks_snap;
- smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
-
- /*
- * If the CPU remained in dynticks mode for the entire time
- * and didn't take any interrupts, NMIs, SMIs, or whatever,
- * then it cannot have executed an RCU read-side critical section
- * during that time, so there is no need for it to execute a
- * memory barrier.
- */
-
- if ((curr == snap) && ((curr & 0x1) == 0))
- return 0;
-
- /*
- * If the CPU either entered or exited an outermost interrupt,
- * SMI, NMI, or whatever handler, then we know that it executed
- * a memory barrier when doing so. So we don't need another one.
- */
- if (curr != snap)
- return 0;
-
- /* We need the CPU to execute a memory barrier. */
-
- return 1;
-}
-
-static void dyntick_save_progress_counter_sched(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->sched_dynticks_snap = rdssp->dynticks;
-}
-
-static int rcu_qsctr_inc_needed_dyntick(int cpu)
-{
- long curr;
- long snap;
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- curr = rdssp->dynticks;
- snap = rdssp->sched_dynticks_snap;
- smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
-
- /*
- * If the CPU remained in dynticks mode for the entire time
- * and didn't take any interrupts, NMIs, SMIs, or whatever,
- * then it cannot be in the middle of an rcu_read_lock(), so
- * the next rcu_read_lock() it executes must use the new value
- * of the counter. Therefore, this CPU has been in a quiescent
- * state the entire time, and we don't need to wait for it.
- */
-
- if ((curr == snap) && ((curr & 0x1) == 0))
- return 0;
-
- /*
- * If the CPU passed through or entered a dynticks idle phase with
- * no active irq handlers, then, as above, this CPU has already
- * passed through a quiescent state.
- */
-
- if ((curr - snap) > 2 || (snap & 0x1) == 0)
- return 0;
-
- /* We need this CPU to go through a quiescent state. */
-
- return 1;
-}
-
-#else /* !CONFIG_NO_HZ */
-
-# define dyntick_save_progress_counter(cpu) do { } while (0)
-# define rcu_try_flip_waitack_needed(cpu) (1)
-# define rcu_try_flip_waitmb_needed(cpu) (1)
-
-# define dyntick_save_progress_counter_sched(cpu) do { } while (0)
-# define rcu_qsctr_inc_needed_dyntick(cpu) (1)
-
-#endif /* CONFIG_NO_HZ */
-
-static void save_qsctr_sched(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- rdssp->sched_qs_snap = rdssp->sched_qs;
-}
-
-static inline int rcu_qsctr_inc_needed(int cpu)
-{
- struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
-
- /*
- * If there has been a quiescent state, no more need to wait
- * on this CPU.
- */
-
- if (rdssp->sched_qs != rdssp->sched_qs_snap) {
- smp_mb(); /* force ordering with cpu entering schedule(). */
- return 0;
- }
-
- /* We need this CPU to go through a quiescent state. */
-
- return 1;
-}
-
-/*
- * Get here when RCU is idle. Decide whether we need to
- * move out of idle state, and return non-zero if so.
- * "Straightforward" approach for the moment, might later
- * use callback-list lengths, grace-period duration, or
- * some such to determine when to exit idle state.
- * Might also need a pre-idle test that does not acquire
- * the lock, but let's get the simple case working first...
- */
-
-static int
-rcu_try_flip_idle(void)
-{
- int cpu;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_i1);
- if (!rcu_pending(smp_processor_id())) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_ie1);
- return 0;
- }
-
- /*
- * Do the flip.
- */
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_g1);
- rcu_ctrlblk.completed++; /* stands in for rcu_try_flip_g2 */
-
- /*
- * Need a memory barrier so that other CPUs see the new
- * counter value before they see the subsequent change of all
- * the rcu_flip_flag instances to rcu_flipped.
- */
-
- smp_mb(); /* see above block comment. */
-
- /* Now ask each CPU for acknowledgement of the flip. */
-
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) {
- per_cpu(rcu_flip_flag, cpu) = rcu_flipped;
- dyntick_save_progress_counter(cpu);
- }
-
- return 1;
-}
-
-/*
- * Wait for CPUs to acknowledge the flip.
- */
-
-static int
-rcu_try_flip_waitack(void)
-{
- int cpu;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_a1);
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map))
- if (rcu_try_flip_waitack_needed(cpu) &&
- per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1);
- return 0;
- }
-
- /*
- * Make sure our checks above don't bleed into subsequent
- * waiting for the sum of the counters to reach zero.
- */
-
- smp_mb(); /* see above block comment. */
- RCU_TRACE_ME(rcupreempt_trace_try_flip_a2);
- return 1;
-}
-
-/*
- * Wait for collective ``last'' counter to reach zero,
- * then tell all CPUs to do an end-of-grace-period memory barrier.
- */
-
-static int
-rcu_try_flip_waitzero(void)
-{
- int cpu;
- int lastidx = !(rcu_ctrlblk.completed & 0x1);
- int sum = 0;
-
- /* Check to see if the sum of the "last" counters is zero. */
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_z1);
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map))
- sum += RCU_DATA_CPU(cpu)->rcu_flipctr[lastidx];
- if (sum != 0) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_ze1);
- return 0;
- }
-
- /*
- * This ensures that the other CPUs see the call for
- * memory barriers -after- the sum to zero has been
- * detected here
- */
- smp_mb(); /* ^^^^^^^^^^^^ */
-
- /* Call for a memory barrier from each CPU. */
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map)) {
- per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed;
- dyntick_save_progress_counter(cpu);
- }
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_z2);
- return 1;
-}
-
-/*
- * Wait for all CPUs to do their end-of-grace-period memory barrier.
- * Return 0 once all CPUs have done so.
- */
-
-static int
-rcu_try_flip_waitmb(void)
-{
- int cpu;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_m1);
- for_each_cpu(cpu, to_cpumask(rcu_cpu_online_map))
- if (rcu_try_flip_waitmb_needed(cpu) &&
- per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_me1);
- return 0;
- }
-
- smp_mb(); /* Ensure that the above checks precede any following flip. */
- RCU_TRACE_ME(rcupreempt_trace_try_flip_m2);
- return 1;
-}
-
-/*
- * Attempt a single flip of the counters. Remember, a single flip does
- * -not- constitute a grace period. Instead, the interval between
- * at least GP_STAGES consecutive flips is a grace period.
- *
- * If anyone is nuts enough to run this CONFIG_PREEMPT_RCU implementation
- * on a large SMP, they might want to use a hierarchical organization of
- * the per-CPU-counter pairs.
- */
-static void rcu_try_flip(void)
-{
- unsigned long flags;
-
- RCU_TRACE_ME(rcupreempt_trace_try_flip_1);
- if (unlikely(!spin_trylock_irqsave(&rcu_ctrlblk.fliplock, flags))) {
- RCU_TRACE_ME(rcupreempt_trace_try_flip_e1);
- return;
- }
-
- /*
- * Take the next transition(s) through the RCU grace-period
- * flip-counter state machine.
- */
-
- switch (rcu_ctrlblk.rcu_try_flip_state) {
- case rcu_try_flip_idle_state:
- if (rcu_try_flip_idle())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_waitack_state;
- break;
- case rcu_try_flip_waitack_state:
- if (rcu_try_flip_waitack())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_waitzero_state;
- break;
- case rcu_try_flip_waitzero_state:
- if (rcu_try_flip_waitzero())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_waitmb_state;
- break;
- case rcu_try_flip_waitmb_state:
- if (rcu_try_flip_waitmb())
- rcu_ctrlblk.rcu_try_flip_state =
- rcu_try_flip_idle_state;
- }
- spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
-}
-
-/*
- * Check to see if this CPU needs to do a memory barrier in order to
- * ensure that any prior RCU read-side critical sections have committed
- * their counter manipulations and critical-section memory references
- * before declaring the grace period to be completed.
- */
-static void rcu_check_mb(int cpu)
-{
- if (per_cpu(rcu_mb_flag, cpu) == rcu_mb_needed) {
- smp_mb(); /* Ensure RCU read-side accesses are visible. */
- per_cpu(rcu_mb_flag, cpu) = rcu_mb_done;
- }
-}
-
-void rcu_check_callbacks(int cpu, int user)
-{
- unsigned long flags;
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- /*
- * If this CPU took its interrupt from user mode or from the
- * idle loop, and this is not a nested interrupt, then
- * this CPU has to have exited all prior preept-disable
- * sections of code. So increment the counter to note this.
- *
- * The memory barrier is needed to handle the case where
- * writes from a preempt-disable section of code get reordered
- * into schedule() by this CPU's write buffer. So the memory
- * barrier makes sure that the rcu_qsctr_inc() is seen by other
- * CPUs to happen after any such write.
- */
-
- if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
- smp_mb(); /* Guard against aggressive schedule(). */
- rcu_qsctr_inc(cpu);
- }
-
- rcu_check_mb(cpu);
- if (rcu_ctrlblk.completed == rdp->completed)
- rcu_try_flip();
- spin_lock_irqsave(&rdp->lock, flags);
- RCU_TRACE_RDP(rcupreempt_trace_check_callbacks, rdp);
- __rcu_advance_callbacks(rdp);
- if (rdp->donelist == NULL) {
- spin_unlock_irqrestore(&rdp->lock, flags);
- } else {
- spin_unlock_irqrestore(&rdp->lock, flags);
- raise_softirq(RCU_SOFTIRQ);
- }
-}
-
-/*
- * Needed by dynticks, to make sure all RCU processing has finished
- * when we go idle:
- */
-void rcu_advance_callbacks(int cpu, int user)
-{
- unsigned long flags;
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- if (rcu_ctrlblk.completed == rdp->completed) {
- rcu_try_flip();
- if (rcu_ctrlblk.completed == rdp->completed)
- return;
- }
- spin_lock_irqsave(&rdp->lock, flags);
- RCU_TRACE_RDP(rcupreempt_trace_check_callbacks, rdp);
- __rcu_advance_callbacks(rdp);
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define rcu_offline_cpu_enqueue(srclist, srctail, dstlist, dsttail) do { \
- *dsttail = srclist; \
- if (srclist != NULL) { \
- dsttail = srctail; \
- srclist = NULL; \
- srctail = &srclist;\
- } \
- } while (0)
-
-void rcu_offline_cpu(int cpu)
-{
- int i;
- struct rcu_head *list = NULL;
- unsigned long flags;
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
- struct rcu_head *schedlist = NULL;
- struct rcu_head **schedtail = &schedlist;
- struct rcu_head **tail = &list;
-
- /*
- * Remove all callbacks from the newly dead CPU, retaining order.
- * Otherwise rcu_barrier() will fail
- */
-
- spin_lock_irqsave(&rdp->lock, flags);
- rcu_offline_cpu_enqueue(rdp->donelist, rdp->donetail, list, tail);
- for (i = GP_STAGES - 1; i >= 0; i--)
- rcu_offline_cpu_enqueue(rdp->waitlist[i], rdp->waittail[i],
- list, tail);
- rcu_offline_cpu_enqueue(rdp->nextlist, rdp->nexttail, list, tail);
- rcu_offline_cpu_enqueue(rdp->waitschedlist, rdp->waitschedtail,
- schedlist, schedtail);
- rcu_offline_cpu_enqueue(rdp->nextschedlist, rdp->nextschedtail,
- schedlist, schedtail);
- rdp->rcu_sched_sleeping = 0;
- spin_unlock_irqrestore(&rdp->lock, flags);
- rdp->waitlistcount = 0;
-
- /* Disengage the newly dead CPU from the grace-period computation. */
-
- spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags);
- rcu_check_mb(cpu);
- if (per_cpu(rcu_flip_flag, cpu) == rcu_flipped) {
- smp_mb(); /* Subsequent counter accesses must see new value */
- per_cpu(rcu_flip_flag, cpu) = rcu_flip_seen;
- smp_mb(); /* Subsequent RCU read-side critical sections */
- /* seen -after- acknowledgement. */
- }
-
- RCU_DATA_ME()->rcu_flipctr[0] += RCU_DATA_CPU(cpu)->rcu_flipctr[0];
- RCU_DATA_ME()->rcu_flipctr[1] += RCU_DATA_CPU(cpu)->rcu_flipctr[1];
-
- RCU_DATA_CPU(cpu)->rcu_flipctr[0] = 0;
- RCU_DATA_CPU(cpu)->rcu_flipctr[1] = 0;
-
- cpumask_clear_cpu(cpu, to_cpumask(rcu_cpu_online_map));
-
- spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
-
- /*
- * Place the removed callbacks on the current CPU's queue.
- * Make them all start a new grace period: simple approach,
- * in theory could starve a given set of callbacks, but
- * you would need to be doing some serious CPU hotplugging
- * to make this happen. If this becomes a problem, adding
- * a synchronize_rcu() to the hotplug path would be a simple
- * fix.
- */
-
- local_irq_save(flags); /* disable preempt till we know what lock. */
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- *rdp->nexttail = list;
- if (list)
- rdp->nexttail = tail;
- *rdp->nextschedtail = schedlist;
- if (schedlist)
- rdp->nextschedtail = schedtail;
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-
-#else /* #ifdef CONFIG_HOTPLUG_CPU */
-
-void rcu_offline_cpu(int cpu)
-{
-}
-
-#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
-
-void __cpuinit rcu_online_cpu(int cpu)
-{
- unsigned long flags;
- struct rcu_data *rdp;
-
- spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags);
- cpumask_set_cpu(cpu, to_cpumask(rcu_cpu_online_map));
- spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
-
- /*
- * The rcu_sched grace-period processing might have bypassed
- * this CPU, given that it was not in the rcu_cpu_online_map
- * when the grace-period scan started. This means that the
- * grace-period task might sleep. So make sure that if this
- * should happen, the first callback posted to this CPU will
- * wake up the grace-period task if need be.
- */
-
- rdp = RCU_DATA_CPU(cpu);
- spin_lock_irqsave(&rdp->lock, flags);
- rdp->rcu_sched_sleeping = 1;
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-
-static void rcu_process_callbacks(struct softirq_action *unused)
-{
- unsigned long flags;
- struct rcu_head *next, *list;
- struct rcu_data *rdp;
-
- local_irq_save(flags);
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- list = rdp->donelist;
- if (list == NULL) {
- spin_unlock_irqrestore(&rdp->lock, flags);
- return;
- }
- rdp->donelist = NULL;
- rdp->donetail = &rdp->donelist;
- RCU_TRACE_RDP(rcupreempt_trace_done_remove, rdp);
- spin_unlock_irqrestore(&rdp->lock, flags);
- while (list) {
- next = list->next;
- list->func(list);
- list = next;
- RCU_TRACE_ME(rcupreempt_trace_invoke);
- }
-}
-
-void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
- struct rcu_data *rdp;
-
- head->func = func;
- head->next = NULL;
- local_irq_save(flags);
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- __rcu_advance_callbacks(rdp);
- *rdp->nexttail = head;
- rdp->nexttail = &head->next;
- RCU_TRACE_RDP(rcupreempt_trace_next_add, rdp);
- spin_unlock_irqrestore(&rdp->lock, flags);
-}
-EXPORT_SYMBOL_GPL(call_rcu);
-
-void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
-{
- unsigned long flags;
- struct rcu_data *rdp;
- int wake_gp = 0;
-
- head->func = func;
- head->next = NULL;
- local_irq_save(flags);
- rdp = RCU_DATA_ME();
- spin_lock(&rdp->lock);
- *rdp->nextschedtail = head;
- rdp->nextschedtail = &head->next;
- if (rdp->rcu_sched_sleeping) {
-
- /* Grace-period processing might be sleeping... */
-
- rdp->rcu_sched_sleeping = 0;
- wake_gp = 1;
- }
- spin_unlock_irqrestore(&rdp->lock, flags);
- if (wake_gp) {
-
- /* Wake up grace-period processing, unless someone beat us. */
-
- spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
- if (rcu_ctrlblk.sched_sleep != rcu_sched_sleeping)
- wake_gp = 0;
- rcu_ctrlblk.sched_sleep = rcu_sched_not_sleeping;
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- if (wake_gp)
- wake_up_interruptible(&rcu_ctrlblk.sched_wq);
- }
-}
-EXPORT_SYMBOL_GPL(call_rcu_sched);
-
-/*
- * Wait until all currently running preempt_disable() code segments
- * (including hardware-irq-disable segments) complete. Note that
- * in -rt this does -not- necessarily result in all currently executing
- * interrupt -handlers- having completed.
- */
-void __synchronize_sched(void)
-{
- struct rcu_synchronize rcu;
-
- if (num_online_cpus() == 1)
- return; /* blocking is gp if only one CPU! */
-
- init_completion(&rcu.completion);
- /* Will wake me after RCU finished. */
- call_rcu_sched(&rcu.head, wakeme_after_rcu);
- /* Wait for it. */
- wait_for_completion(&rcu.completion);
-}
-EXPORT_SYMBOL_GPL(__synchronize_sched);
-
-/*
- * kthread function that manages call_rcu_sched grace periods.
- */
-static int rcu_sched_grace_period(void *arg)
-{
- int couldsleep; /* might sleep after current pass. */
- int couldsleepnext = 0; /* might sleep after next pass. */
- int cpu;
- unsigned long flags;
- struct rcu_data *rdp;
- int ret;
-
- /*
- * Each pass through the following loop handles one
- * rcu_sched grace period cycle.
- */
- do {
- /* Save each CPU's current state. */
-
- for_each_online_cpu(cpu) {
- dyntick_save_progress_counter_sched(cpu);
- save_qsctr_sched(cpu);
- }
-
- /*
- * Sleep for about an RCU grace-period's worth to
- * allow better batching and to consume less CPU.
- */
- schedule_timeout_interruptible(RCU_SCHED_BATCH_TIME);
-
- /*
- * If there was nothing to do last time, prepare to
- * sleep at the end of the current grace period cycle.
- */
- couldsleep = couldsleepnext;
- couldsleepnext = 1;
- if (couldsleep) {
- spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
- rcu_ctrlblk.sched_sleep = rcu_sched_sleep_prep;
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- }
-
- /*
- * Wait on each CPU in turn to have either visited
- * a quiescent state or been in dynticks-idle mode.
- */
- for_each_online_cpu(cpu) {
- while (rcu_qsctr_inc_needed(cpu) &&
- rcu_qsctr_inc_needed_dyntick(cpu)) {
- /* resched_cpu(cpu); @@@ */
- schedule_timeout_interruptible(1);
- }
- }
-
- /* Advance callbacks for each CPU. */
-
- for_each_online_cpu(cpu) {
-
- rdp = RCU_DATA_CPU(cpu);
- spin_lock_irqsave(&rdp->lock, flags);
-
- /*
- * We are running on this CPU irq-disabled, so no
- * CPU can go offline until we re-enable irqs.
- * The current CPU might have already gone
- * offline (between the for_each_offline_cpu and
- * the spin_lock_irqsave), but in that case all its
- * callback lists will be empty, so no harm done.
- *
- * Advance the callbacks! We share normal RCU's
- * donelist, since callbacks are invoked the
- * same way in either case.
- */
- if (rdp->waitschedlist != NULL) {
- *rdp->donetail = rdp->waitschedlist;
- rdp->donetail = rdp->waitschedtail;
-
- /*
- * Next rcu_check_callbacks() will
- * do the required raise_softirq().
- */
- }
- if (rdp->nextschedlist != NULL) {
- rdp->waitschedlist = rdp->nextschedlist;
- rdp->waitschedtail = rdp->nextschedtail;
- couldsleep = 0;
- couldsleepnext = 0;
- } else {
- rdp->waitschedlist = NULL;
- rdp->waitschedtail = &rdp->waitschedlist;
- }
- rdp->nextschedlist = NULL;
- rdp->nextschedtail = &rdp->nextschedlist;
-
- /* Mark sleep intention. */
-
- rdp->rcu_sched_sleeping = couldsleep;
-
- spin_unlock_irqrestore(&rdp->lock, flags);
- }
-
- /* If we saw callbacks on the last scan, go deal with them. */
-
- if (!couldsleep)
- continue;
-
- /* Attempt to block... */
-
- spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
- if (rcu_ctrlblk.sched_sleep != rcu_sched_sleep_prep) {
-
- /*
- * Someone posted a callback after we scanned.
- * Go take care of it.
- */
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- couldsleepnext = 0;
- continue;
- }
-
- /* Block until the next person posts a callback. */
-
- rcu_ctrlblk.sched_sleep = rcu_sched_sleeping;
- spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
- ret = 0; /* unused */
- __wait_event_interruptible(rcu_ctrlblk.sched_wq,
- rcu_ctrlblk.sched_sleep != rcu_sched_sleeping,
- ret);
-
- couldsleepnext = 0;
-
- } while (!kthread_should_stop());
-
- return (0);
-}
-
-/*
- * Check to see if any future RCU-related work will need to be done
- * by the current CPU, even if none need be done immediately, returning
- * 1 if so. Assumes that notifiers would take care of handling any
- * outstanding requests from the RCU core.
- *
- * This function is part of the RCU implementation; it is -not-
- * an exported member of the RCU API.
- */
-int rcu_needs_cpu(int cpu)
-{
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- return (rdp->donelist != NULL ||
- !!rdp->waitlistcount ||
- rdp->nextlist != NULL ||
- rdp->nextschedlist != NULL ||
- rdp->waitschedlist != NULL);
-}
-
-int rcu_pending(int cpu)
-{
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- /* The CPU has at least one callback queued somewhere. */
-
- if (rdp->donelist != NULL ||
- !!rdp->waitlistcount ||
- rdp->nextlist != NULL ||
- rdp->nextschedlist != NULL ||
- rdp->waitschedlist != NULL)
- return 1;
-
- /* The RCU core needs an acknowledgement from this CPU. */
-
- if ((per_cpu(rcu_flip_flag, cpu) == rcu_flipped) ||
- (per_cpu(rcu_mb_flag, cpu) == rcu_mb_needed))
- return 1;
-
- /* This CPU has fallen behind the global grace-period number. */
-
- if (rdp->completed != rcu_ctrlblk.completed)
- return 1;
-
- /* Nothing needed from this CPU. */
-
- return 0;
-}
-
-static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- long cpu = (long)hcpu;
-
- switch (action) {
- case CPU_UP_PREPARE:
- case CPU_UP_PREPARE_FROZEN:
- rcu_online_cpu(cpu);
- break;
- case CPU_UP_CANCELED:
- case CPU_UP_CANCELED_FROZEN:
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
- rcu_offline_cpu(cpu);
- break;
- default:
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata rcu_nb = {
- .notifier_call = rcu_cpu_notify,
-};
-
-void __init __rcu_init(void)
-{
- int cpu;
- int i;
- struct rcu_data *rdp;
-
- printk(KERN_NOTICE "Preemptible RCU implementation.\n");
- for_each_possible_cpu(cpu) {
- rdp = RCU_DATA_CPU(cpu);
- spin_lock_init(&rdp->lock);
- rdp->completed = 0;
- rdp->waitlistcount = 0;
- rdp->nextlist = NULL;
- rdp->nexttail = &rdp->nextlist;
- for (i = 0; i < GP_STAGES; i++) {
- rdp->waitlist[i] = NULL;
- rdp->waittail[i] = &rdp->waitlist[i];
- }
- rdp->donelist = NULL;
- rdp->donetail = &rdp->donelist;
- rdp->rcu_flipctr[0] = 0;
- rdp->rcu_flipctr[1] = 0;
- rdp->nextschedlist = NULL;
- rdp->nextschedtail = &rdp->nextschedlist;
- rdp->waitschedlist = NULL;
- rdp->waitschedtail = &rdp->waitschedlist;
- rdp->rcu_sched_sleeping = 0;
- }
- register_cpu_notifier(&rcu_nb);
-
- /*
- * We don't need protection against CPU-Hotplug here
- * since
- * a) If a CPU comes online while we are iterating over the
- * cpu_online_mask below, we would only end up making a
- * duplicate call to rcu_online_cpu() which sets the corresponding
- * CPU's mask in the rcu_cpu_online_map.
- *
- * b) A CPU cannot go offline at this point in time since the user
- * does not have access to the sysfs interface, nor do we
- * suspend the system.
- */
- for_each_online_cpu(cpu)
- rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long) cpu);
-
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
-}
-
-/*
- * Late-boot-time RCU initialization that must wait until after scheduler
- * has been initialized.
- */
-void __init rcu_init_sched(void)
-{
- rcu_sched_grace_period_task = kthread_run(rcu_sched_grace_period,
- NULL,
- "rcu_sched_grace_period");
- WARN_ON(IS_ERR(rcu_sched_grace_period_task));
-}
-
-#ifdef CONFIG_RCU_TRACE
-long *rcupreempt_flipctr(int cpu)
-{
- return &RCU_DATA_CPU(cpu)->rcu_flipctr[0];
-}
-EXPORT_SYMBOL_GPL(rcupreempt_flipctr);
-
-int rcupreempt_flip_flag(int cpu)
-{
- return per_cpu(rcu_flip_flag, cpu);
-}
-EXPORT_SYMBOL_GPL(rcupreempt_flip_flag);
-
-int rcupreempt_mb_flag(int cpu)
-{
- return per_cpu(rcu_mb_flag, cpu);
-}
-EXPORT_SYMBOL_GPL(rcupreempt_mb_flag);
-
-char *rcupreempt_try_flip_state_name(void)
-{
- return rcu_try_flip_state_names[rcu_ctrlblk.rcu_try_flip_state];
-}
-EXPORT_SYMBOL_GPL(rcupreempt_try_flip_state_name);
-
-struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu)
-{
- struct rcu_data *rdp = RCU_DATA_CPU(cpu);
-
- return &rdp->trace;
-}
-EXPORT_SYMBOL_GPL(rcupreempt_trace_cpu);
-
-#endif /* #ifdef RCU_TRACE */
diff --git a/kernel/rcupreempt_trace.c b/kernel/rcupreempt_trace.c
deleted file mode 100644
index 7c2665c..0000000
--- a/kernel/rcupreempt_trace.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Read-Copy Update tracing for realtime implementation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2006
- *
- * Papers: http://www.rdrop.com/users/paulmck/RCU
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * Documentation/RCU/ *.txt
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/rcupdate.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/completion.h>
-#include <linux/moduleparam.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/rcupreempt_trace.h>
-#include <linux/debugfs.h>
-
-static struct mutex rcupreempt_trace_mutex;
-static char *rcupreempt_trace_buf;
-#define RCUPREEMPT_TRACE_BUF_SIZE 4096
-
-void rcupreempt_trace_move2done(struct rcupreempt_trace *trace)
-{
- trace->done_length += trace->wait_length;
- trace->done_add += trace->wait_length;
- trace->wait_length = 0;
-}
-void rcupreempt_trace_move2wait(struct rcupreempt_trace *trace)
-{
- trace->wait_length += trace->next_length;
- trace->wait_add += trace->next_length;
- trace->next_length = 0;
-}
-void rcupreempt_trace_try_flip_1(struct rcupreempt_trace *trace)
-{
- atomic_inc(&trace->rcu_try_flip_1);
-}
-void rcupreempt_trace_try_flip_e1(struct rcupreempt_trace *trace)
-{
- atomic_inc(&trace->rcu_try_flip_e1);
-}
-void rcupreempt_trace_try_flip_i1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_i1++;
-}
-void rcupreempt_trace_try_flip_ie1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_ie1++;
-}
-void rcupreempt_trace_try_flip_g1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_g1++;
-}
-void rcupreempt_trace_try_flip_a1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_a1++;
-}
-void rcupreempt_trace_try_flip_ae1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_ae1++;
-}
-void rcupreempt_trace_try_flip_a2(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_a2++;
-}
-void rcupreempt_trace_try_flip_z1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_z1++;
-}
-void rcupreempt_trace_try_flip_ze1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_ze1++;
-}
-void rcupreempt_trace_try_flip_z2(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_z2++;
-}
-void rcupreempt_trace_try_flip_m1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_m1++;
-}
-void rcupreempt_trace_try_flip_me1(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_me1++;
-}
-void rcupreempt_trace_try_flip_m2(struct rcupreempt_trace *trace)
-{
- trace->rcu_try_flip_m2++;
-}
-void rcupreempt_trace_check_callbacks(struct rcupreempt_trace *trace)
-{
- trace->rcu_check_callbacks++;
-}
-void rcupreempt_trace_done_remove(struct rcupreempt_trace *trace)
-{
- trace->done_remove += trace->done_length;
- trace->done_length = 0;
-}
-void rcupreempt_trace_invoke(struct rcupreempt_trace *trace)
-{
- atomic_inc(&trace->done_invoked);
-}
-void rcupreempt_trace_next_add(struct rcupreempt_trace *trace)
-{
- trace->next_add++;
- trace->next_length++;
-}
-
-static void rcupreempt_trace_sum(struct rcupreempt_trace *sp)
-{
- struct rcupreempt_trace *cp;
- int cpu;
-
- memset(sp, 0, sizeof(*sp));
- for_each_possible_cpu(cpu) {
- cp = rcupreempt_trace_cpu(cpu);
- sp->next_length += cp->next_length;
- sp->next_add += cp->next_add;
- sp->wait_length += cp->wait_length;
- sp->wait_add += cp->wait_add;
- sp->done_length += cp->done_length;
- sp->done_add += cp->done_add;
- sp->done_remove += cp->done_remove;
- atomic_add(atomic_read(&cp->done_invoked), &sp->done_invoked);
- sp->rcu_check_callbacks += cp->rcu_check_callbacks;
- atomic_add(atomic_read(&cp->rcu_try_flip_1),
- &sp->rcu_try_flip_1);
- atomic_add(atomic_read(&cp->rcu_try_flip_e1),
- &sp->rcu_try_flip_e1);
- sp->rcu_try_flip_i1 += cp->rcu_try_flip_i1;
- sp->rcu_try_flip_ie1 += cp->rcu_try_flip_ie1;
- sp->rcu_try_flip_g1 += cp->rcu_try_flip_g1;
- sp->rcu_try_flip_a1 += cp->rcu_try_flip_a1;
- sp->rcu_try_flip_ae1 += cp->rcu_try_flip_ae1;
- sp->rcu_try_flip_a2 += cp->rcu_try_flip_a2;
- sp->rcu_try_flip_z1 += cp->rcu_try_flip_z1;
- sp->rcu_try_flip_ze1 += cp->rcu_try_flip_ze1;
- sp->rcu_try_flip_z2 += cp->rcu_try_flip_z2;
- sp->rcu_try_flip_m1 += cp->rcu_try_flip_m1;
- sp->rcu_try_flip_me1 += cp->rcu_try_flip_me1;
- sp->rcu_try_flip_m2 += cp->rcu_try_flip_m2;
- }
-}
-
-static ssize_t rcustats_read(struct file *filp, char __user *buffer,
- size_t count, loff_t *ppos)
-{
- struct rcupreempt_trace trace;
- ssize_t bcount;
- int cnt = 0;
-
- rcupreempt_trace_sum(&trace);
- mutex_lock(&rcupreempt_trace_mutex);
- snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "ggp=%ld rcc=%ld\n",
- rcu_batches_completed(),
- trace.rcu_check_callbacks);
- snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "na=%ld nl=%ld wa=%ld wl=%ld da=%ld dl=%ld dr=%ld di=%d\n"
- "1=%d e1=%d i1=%ld ie1=%ld g1=%ld a1=%ld ae1=%ld a2=%ld\n"
- "z1=%ld ze1=%ld z2=%ld m1=%ld me1=%ld m2=%ld\n",
-
- trace.next_add, trace.next_length,
- trace.wait_add, trace.wait_length,
- trace.done_add, trace.done_length,
- trace.done_remove, atomic_read(&trace.done_invoked),
- atomic_read(&trace.rcu_try_flip_1),
- atomic_read(&trace.rcu_try_flip_e1),
- trace.rcu_try_flip_i1, trace.rcu_try_flip_ie1,
- trace.rcu_try_flip_g1,
- trace.rcu_try_flip_a1, trace.rcu_try_flip_ae1,
- trace.rcu_try_flip_a2,
- trace.rcu_try_flip_z1, trace.rcu_try_flip_ze1,
- trace.rcu_try_flip_z2,
- trace.rcu_try_flip_m1, trace.rcu_try_flip_me1,
- trace.rcu_try_flip_m2);
- bcount = simple_read_from_buffer(buffer, count, ppos,
- rcupreempt_trace_buf, strlen(rcupreempt_trace_buf));
- mutex_unlock(&rcupreempt_trace_mutex);
- return bcount;
-}
-
-static ssize_t rcugp_read(struct file *filp, char __user *buffer,
- size_t count, loff_t *ppos)
-{
- long oldgp = rcu_batches_completed();
- ssize_t bcount;
-
- mutex_lock(&rcupreempt_trace_mutex);
- synchronize_rcu();
- snprintf(rcupreempt_trace_buf, RCUPREEMPT_TRACE_BUF_SIZE,
- "oldggp=%ld newggp=%ld\n", oldgp, rcu_batches_completed());
- bcount = simple_read_from_buffer(buffer, count, ppos,
- rcupreempt_trace_buf, strlen(rcupreempt_trace_buf));
- mutex_unlock(&rcupreempt_trace_mutex);
- return bcount;
-}
-
-static ssize_t rcuctrs_read(struct file *filp, char __user *buffer,
- size_t count, loff_t *ppos)
-{
- int cnt = 0;
- int cpu;
- int f = rcu_batches_completed() & 0x1;
- ssize_t bcount;
-
- mutex_lock(&rcupreempt_trace_mutex);
-
- cnt += snprintf(&rcupreempt_trace_buf[cnt], RCUPREEMPT_TRACE_BUF_SIZE,
- "CPU last cur F M\n");
- for_each_online_cpu(cpu) {
- long *flipctr = rcupreempt_flipctr(cpu);
- cnt += snprintf(&rcupreempt_trace_buf[cnt],
- RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "%3d %4ld %3ld %d %d\n",
- cpu,
- flipctr[!f],
- flipctr[f],
- rcupreempt_flip_flag(cpu),
- rcupreempt_mb_flag(cpu));
- }
- cnt += snprintf(&rcupreempt_trace_buf[cnt],
- RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "ggp = %ld, state = %s\n",
- rcu_batches_completed(),
- rcupreempt_try_flip_state_name());
- cnt += snprintf(&rcupreempt_trace_buf[cnt],
- RCUPREEMPT_TRACE_BUF_SIZE - cnt,
- "\n");
- bcount = simple_read_from_buffer(buffer, count, ppos,
- rcupreempt_trace_buf, strlen(rcupreempt_trace_buf));
- mutex_unlock(&rcupreempt_trace_mutex);
- return bcount;
-}
-
-static struct file_operations rcustats_fops = {
- .owner = THIS_MODULE,
- .read = rcustats_read,
-};
-
-static struct file_operations rcugp_fops = {
- .owner = THIS_MODULE,
- .read = rcugp_read,
-};
-
-static struct file_operations rcuctrs_fops = {
- .owner = THIS_MODULE,
- .read = rcuctrs_read,
-};
-
-static struct dentry *rcudir, *statdir, *ctrsdir, *gpdir;
-static int rcupreempt_debugfs_init(void)
-{
- rcudir = debugfs_create_dir("rcu", NULL);
- if (!rcudir)
- goto out;
- statdir = debugfs_create_file("rcustats", 0444, rcudir,
- NULL, &rcustats_fops);
- if (!statdir)
- goto free_out;
-
- gpdir = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
- if (!gpdir)
- goto free_out;
-
- ctrsdir = debugfs_create_file("rcuctrs", 0444, rcudir,
- NULL, &rcuctrs_fops);
- if (!ctrsdir)
- goto free_out;
- return 0;
-free_out:
- if (statdir)
- debugfs_remove(statdir);
- if (gpdir)
- debugfs_remove(gpdir);
- debugfs_remove(rcudir);
-out:
- return 1;
-}
-
-static int __init rcupreempt_trace_init(void)
-{
- int ret;
-
- mutex_init(&rcupreempt_trace_mutex);
- rcupreempt_trace_buf = kmalloc(RCUPREEMPT_TRACE_BUF_SIZE, GFP_KERNEL);
- if (!rcupreempt_trace_buf)
- return 1;
- ret = rcupreempt_debugfs_init();
- if (ret)
- kfree(rcupreempt_trace_buf);
- return ret;
-}
-
-static void __exit rcupreempt_trace_cleanup(void)
-{
- debugfs_remove(statdir);
- debugfs_remove(gpdir);
- debugfs_remove(ctrsdir);
- debugfs_remove(rcudir);
- kfree(rcupreempt_trace_buf);
-}
-
-
-module_init(rcupreempt_trace_init);
-module_exit(rcupreempt_trace_cleanup);
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 9b4a975..b33db53 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -257,14 +257,14 @@
void (*init)(void);
void (*cleanup)(void);
int (*readlock)(void);
- void (*readdelay)(struct rcu_random_state *rrsp);
+ void (*read_delay)(struct rcu_random_state *rrsp);
void (*readunlock)(int idx);
int (*completed)(void);
- void (*deferredfree)(struct rcu_torture *p);
+ void (*deferred_free)(struct rcu_torture *p);
void (*sync)(void);
void (*cb_barrier)(void);
int (*stats)(char *page);
- int irqcapable;
+ int irq_capable;
char *name;
};
static struct rcu_torture_ops *cur_ops = NULL;
@@ -320,7 +320,7 @@
rp->rtort_mbtest = 0;
rcu_torture_free(rp);
} else
- cur_ops->deferredfree(rp);
+ cur_ops->deferred_free(rp);
}
static void rcu_torture_deferred_free(struct rcu_torture *p)
@@ -329,18 +329,18 @@
}
static struct rcu_torture_ops rcu_ops = {
- .init = NULL,
- .cleanup = NULL,
- .readlock = rcu_torture_read_lock,
- .readdelay = rcu_read_delay,
- .readunlock = rcu_torture_read_unlock,
- .completed = rcu_torture_completed,
- .deferredfree = rcu_torture_deferred_free,
- .sync = synchronize_rcu,
- .cb_barrier = rcu_barrier,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu"
+ .init = NULL,
+ .cleanup = NULL,
+ .readlock = rcu_torture_read_lock,
+ .read_delay = rcu_read_delay,
+ .readunlock = rcu_torture_read_unlock,
+ .completed = rcu_torture_completed,
+ .deferred_free = rcu_torture_deferred_free,
+ .sync = synchronize_rcu,
+ .cb_barrier = rcu_barrier,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu"
};
static void rcu_sync_torture_deferred_free(struct rcu_torture *p)
@@ -370,18 +370,18 @@
}
static struct rcu_torture_ops rcu_sync_ops = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = rcu_torture_read_lock,
- .readdelay = rcu_read_delay,
- .readunlock = rcu_torture_read_unlock,
- .completed = rcu_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = synchronize_rcu,
- .cb_barrier = NULL,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu_sync"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = rcu_torture_read_lock,
+ .read_delay = rcu_read_delay,
+ .readunlock = rcu_torture_read_unlock,
+ .completed = rcu_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = synchronize_rcu,
+ .cb_barrier = NULL,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu_sync"
};
/*
@@ -432,33 +432,33 @@
}
static struct rcu_torture_ops rcu_bh_ops = {
- .init = NULL,
- .cleanup = NULL,
- .readlock = rcu_bh_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = rcu_bh_torture_read_unlock,
- .completed = rcu_bh_torture_completed,
- .deferredfree = rcu_bh_torture_deferred_free,
- .sync = rcu_bh_torture_synchronize,
- .cb_barrier = rcu_barrier_bh,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu_bh"
+ .init = NULL,
+ .cleanup = NULL,
+ .readlock = rcu_bh_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = rcu_bh_torture_read_unlock,
+ .completed = rcu_bh_torture_completed,
+ .deferred_free = rcu_bh_torture_deferred_free,
+ .sync = rcu_bh_torture_synchronize,
+ .cb_barrier = rcu_barrier_bh,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu_bh"
};
static struct rcu_torture_ops rcu_bh_sync_ops = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = rcu_bh_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = rcu_bh_torture_read_unlock,
- .completed = rcu_bh_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = rcu_bh_torture_synchronize,
- .cb_barrier = NULL,
- .stats = NULL,
- .irqcapable = 1,
- .name = "rcu_bh_sync"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = rcu_bh_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = rcu_bh_torture_read_unlock,
+ .completed = rcu_bh_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = rcu_bh_torture_synchronize,
+ .cb_barrier = NULL,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "rcu_bh_sync"
};
/*
@@ -530,17 +530,17 @@
}
static struct rcu_torture_ops srcu_ops = {
- .init = srcu_torture_init,
- .cleanup = srcu_torture_cleanup,
- .readlock = srcu_torture_read_lock,
- .readdelay = srcu_read_delay,
- .readunlock = srcu_torture_read_unlock,
- .completed = srcu_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = srcu_torture_synchronize,
- .cb_barrier = NULL,
- .stats = srcu_torture_stats,
- .name = "srcu"
+ .init = srcu_torture_init,
+ .cleanup = srcu_torture_cleanup,
+ .readlock = srcu_torture_read_lock,
+ .read_delay = srcu_read_delay,
+ .readunlock = srcu_torture_read_unlock,
+ .completed = srcu_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = srcu_torture_synchronize,
+ .cb_barrier = NULL,
+ .stats = srcu_torture_stats,
+ .name = "srcu"
};
/*
@@ -574,32 +574,49 @@
}
static struct rcu_torture_ops sched_ops = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = sched_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = sched_torture_read_unlock,
- .completed = sched_torture_completed,
- .deferredfree = rcu_sched_torture_deferred_free,
- .sync = sched_torture_synchronize,
- .cb_barrier = rcu_barrier_sched,
- .stats = NULL,
- .irqcapable = 1,
- .name = "sched"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = sched_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = sched_torture_read_unlock,
+ .completed = sched_torture_completed,
+ .deferred_free = rcu_sched_torture_deferred_free,
+ .sync = sched_torture_synchronize,
+ .cb_barrier = rcu_barrier_sched,
+ .stats = NULL,
+ .irq_capable = 1,
+ .name = "sched"
};
static struct rcu_torture_ops sched_ops_sync = {
- .init = rcu_sync_torture_init,
- .cleanup = NULL,
- .readlock = sched_torture_read_lock,
- .readdelay = rcu_read_delay, /* just reuse rcu's version. */
- .readunlock = sched_torture_read_unlock,
- .completed = sched_torture_completed,
- .deferredfree = rcu_sync_torture_deferred_free,
- .sync = sched_torture_synchronize,
- .cb_barrier = NULL,
- .stats = NULL,
- .name = "sched_sync"
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = sched_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = sched_torture_read_unlock,
+ .completed = sched_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = sched_torture_synchronize,
+ .cb_barrier = NULL,
+ .stats = NULL,
+ .name = "sched_sync"
+};
+
+extern int rcu_expedited_torture_stats(char *page);
+
+static struct rcu_torture_ops sched_expedited_ops = {
+ .init = rcu_sync_torture_init,
+ .cleanup = NULL,
+ .readlock = sched_torture_read_lock,
+ .read_delay = rcu_read_delay, /* just reuse rcu's version. */
+ .readunlock = sched_torture_read_unlock,
+ .completed = sched_torture_completed,
+ .deferred_free = rcu_sync_torture_deferred_free,
+ .sync = synchronize_sched_expedited,
+ .cb_barrier = NULL,
+ .stats = rcu_expedited_torture_stats,
+ .irq_capable = 1,
+ .name = "sched_expedited"
};
/*
@@ -635,7 +652,7 @@
i = RCU_TORTURE_PIPE_LEN;
atomic_inc(&rcu_torture_wcount[i]);
old_rp->rtort_pipe_count++;
- cur_ops->deferredfree(old_rp);
+ cur_ops->deferred_free(old_rp);
}
rcu_torture_current_version++;
oldbatch = cur_ops->completed();
@@ -700,7 +717,7 @@
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
spin_lock(&rand_lock);
- cur_ops->readdelay(&rand);
+ cur_ops->read_delay(&rand);
n_rcu_torture_timers++;
spin_unlock(&rand_lock);
preempt_disable();
@@ -738,11 +755,11 @@
VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
set_user_nice(current, 19);
- if (irqreader && cur_ops->irqcapable)
+ if (irqreader && cur_ops->irq_capable)
setup_timer_on_stack(&t, rcu_torture_timer, 0);
do {
- if (irqreader && cur_ops->irqcapable) {
+ if (irqreader && cur_ops->irq_capable) {
if (!timer_pending(&t))
mod_timer(&t, 1);
}
@@ -757,7 +774,7 @@
}
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
- cur_ops->readdelay(&rand);
+ cur_ops->read_delay(&rand);
preempt_disable();
pipe_count = p->rtort_pipe_count;
if (pipe_count > RCU_TORTURE_PIPE_LEN) {
@@ -778,7 +795,7 @@
} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
VERBOSE_PRINTK_STRING("rcu_torture_reader task stopping");
rcutorture_shutdown_absorb("rcu_torture_reader");
- if (irqreader && cur_ops->irqcapable)
+ if (irqreader && cur_ops->irq_capable)
del_timer_sync(&t);
while (!kthread_should_stop())
schedule_timeout_uninterruptible(1);
@@ -1078,6 +1095,7 @@
int firsterr = 0;
static struct rcu_torture_ops *torture_ops[] =
{ &rcu_ops, &rcu_sync_ops, &rcu_bh_ops, &rcu_bh_sync_ops,
+ &sched_expedited_ops,
&srcu_ops, &sched_ops, &sched_ops_sync, };
mutex_lock(&fullstop_mutex);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7717b95..6b11b07 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -35,6 +35,7 @@
#include <linux/rcupdate.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/nmi.h>
#include <asm/atomic.h>
#include <linux/bitops.h>
#include <linux/module.h>
@@ -46,6 +47,8 @@
#include <linux/mutex.h>
#include <linux/time.h>
+#include "rcutree.h"
+
#ifdef CONFIG_DEBUG_LOCK_ALLOC
static struct lock_class_key rcu_lock_key;
struct lockdep_map rcu_lock_map =
@@ -72,30 +75,59 @@
.n_force_qs_ngp = 0, \
}
-struct rcu_state rcu_state = RCU_STATE_INITIALIZER(rcu_state);
-DEFINE_PER_CPU(struct rcu_data, rcu_data);
+struct rcu_state rcu_sched_state = RCU_STATE_INITIALIZER(rcu_sched_state);
+DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);
struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
+extern long rcu_batches_completed_sched(void);
+static struct rcu_node *rcu_get_root(struct rcu_state *rsp);
+static void cpu_quiet_msk(unsigned long mask, struct rcu_state *rsp,
+ struct rcu_node *rnp, unsigned long flags);
+static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags);
+#ifdef CONFIG_HOTPLUG_CPU
+static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp);
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+static void __rcu_process_callbacks(struct rcu_state *rsp,
+ struct rcu_data *rdp);
+static void __call_rcu(struct rcu_head *head,
+ void (*func)(struct rcu_head *rcu),
+ struct rcu_state *rsp);
+static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp);
+static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_state *rsp,
+ int preemptable);
+
+#include "rcutree_plugin.h"
+
/*
- * Increment the quiescent state counter.
- * The counter is a bit degenerated: We do not need to know
+ * Note a quiescent state. Because we do not need to know
* how many quiescent states passed, just if there was at least
- * one since the start of the grace period. Thus just a flag.
+ * one since the start of the grace period, this just sets a flag.
*/
-void rcu_qsctr_inc(int cpu)
+void rcu_sched_qs(int cpu)
{
- struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
+ unsigned long flags;
+ struct rcu_data *rdp;
+
+ local_irq_save(flags);
+ rdp = &per_cpu(rcu_sched_data, cpu);
rdp->passed_quiesc = 1;
rdp->passed_quiesc_completed = rdp->completed;
+ rcu_preempt_qs(cpu);
+ local_irq_restore(flags);
}
-void rcu_bh_qsctr_inc(int cpu)
+void rcu_bh_qs(int cpu)
{
- struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu);
+ unsigned long flags;
+ struct rcu_data *rdp;
+
+ local_irq_save(flags);
+ rdp = &per_cpu(rcu_bh_data, cpu);
rdp->passed_quiesc = 1;
rdp->passed_quiesc_completed = rdp->completed;
+ local_irq_restore(flags);
}
#ifdef CONFIG_NO_HZ
@@ -110,15 +142,16 @@
static int qlowmark = 100; /* Once only this many pending, use blimit. */
static void force_quiescent_state(struct rcu_state *rsp, int relaxed);
+static int rcu_pending(int cpu);
/*
- * Return the number of RCU batches processed thus far for debug & stats.
+ * Return the number of RCU-sched batches processed thus far for debug & stats.
*/
-long rcu_batches_completed(void)
+long rcu_batches_completed_sched(void)
{
- return rcu_state.completed;
+ return rcu_sched_state.completed;
}
-EXPORT_SYMBOL_GPL(rcu_batches_completed);
+EXPORT_SYMBOL_GPL(rcu_batches_completed_sched);
/*
* Return the number of RCU BH batches processed thus far for debug & stats.
@@ -181,6 +214,10 @@
return 1;
}
+ /* If preemptable RCU, no point in sending reschedule IPI. */
+ if (rdp->preemptable)
+ return 0;
+
/* The CPU is online, so send it a reschedule IPI. */
if (rdp->cpu != smp_processor_id())
smp_send_reschedule(rdp->cpu);
@@ -193,7 +230,6 @@
#endif /* #ifdef CONFIG_SMP */
#ifdef CONFIG_NO_HZ
-static DEFINE_RATELIMIT_STATE(rcu_rs, 10 * HZ, 5);
/**
* rcu_enter_nohz - inform RCU that current CPU is entering nohz
@@ -213,7 +249,7 @@
rdtp = &__get_cpu_var(rcu_dynticks);
rdtp->dynticks++;
rdtp->dynticks_nesting--;
- WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs);
+ WARN_ON_ONCE(rdtp->dynticks & 0x1);
local_irq_restore(flags);
}
@@ -232,7 +268,7 @@
rdtp = &__get_cpu_var(rcu_dynticks);
rdtp->dynticks++;
rdtp->dynticks_nesting++;
- WARN_ON_RATELIMIT(!(rdtp->dynticks & 0x1), &rcu_rs);
+ WARN_ON_ONCE(!(rdtp->dynticks & 0x1));
local_irq_restore(flags);
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
}
@@ -251,7 +287,7 @@
if (rdtp->dynticks & 0x1)
return;
rdtp->dynticks_nmi++;
- WARN_ON_RATELIMIT(!(rdtp->dynticks_nmi & 0x1), &rcu_rs);
+ WARN_ON_ONCE(!(rdtp->dynticks_nmi & 0x1));
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
}
@@ -270,7 +306,7 @@
return;
smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
rdtp->dynticks_nmi++;
- WARN_ON_RATELIMIT(rdtp->dynticks_nmi & 0x1, &rcu_rs);
+ WARN_ON_ONCE(rdtp->dynticks_nmi & 0x1);
}
/**
@@ -286,7 +322,7 @@
if (rdtp->dynticks_nesting++)
return;
rdtp->dynticks++;
- WARN_ON_RATELIMIT(!(rdtp->dynticks & 0x1), &rcu_rs);
+ WARN_ON_ONCE(!(rdtp->dynticks & 0x1));
smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
}
@@ -305,10 +341,10 @@
return;
smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
rdtp->dynticks++;
- WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs);
+ WARN_ON_ONCE(rdtp->dynticks & 0x1);
/* If the interrupt queued a callback, get out of dyntick mode. */
- if (__get_cpu_var(rcu_data).nxtlist ||
+ if (__get_cpu_var(rcu_sched_data).nxtlist ||
__get_cpu_var(rcu_bh_data).nxtlist)
set_need_resched();
}
@@ -461,6 +497,7 @@
printk(KERN_ERR "INFO: RCU detected CPU stalls:");
for (; rnp_cur < rnp_end; rnp_cur++) {
+ rcu_print_task_stall(rnp);
if (rnp_cur->qsmask == 0)
continue;
for (cpu = 0; cpu <= rnp_cur->grphi - rnp_cur->grplo; cpu++)
@@ -469,6 +506,8 @@
}
printk(" (detected by %d, t=%ld jiffies)\n",
smp_processor_id(), (long)(jiffies - rsp->gp_start));
+ trigger_all_cpu_backtrace();
+
force_quiescent_state(rsp, 0); /* Kick them all. */
}
@@ -479,12 +518,14 @@
printk(KERN_ERR "INFO: RCU detected CPU %d stall (t=%lu jiffies)\n",
smp_processor_id(), jiffies - rsp->gp_start);
- dump_stack();
+ trigger_all_cpu_backtrace();
+
spin_lock_irqsave(&rnp->lock, flags);
if ((long)(jiffies - rsp->jiffies_stall) >= 0)
rsp->jiffies_stall =
jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
spin_unlock_irqrestore(&rnp->lock, flags);
+
set_need_resched(); /* kick ourselves to get things going. */
}
@@ -674,6 +715,19 @@
}
/*
+ * Clean up after the prior grace period and let rcu_start_gp() start up
+ * the next grace period if one is needed. Note that the caller must
+ * hold rnp->lock, as required by rcu_start_gp(), which will release it.
+ */
+static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags)
+ __releases(rnp->lock)
+{
+ rsp->completed = rsp->gpnum;
+ rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
+ rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */
+}
+
+/*
* Similar to cpu_quiet(), for which it is a helper function. Allows
* a group of CPUs to be quieted at one go, though all the CPUs in the
* group must be represented by the same leaf rcu_node structure.
@@ -694,7 +748,7 @@
return;
}
rnp->qsmask &= ~mask;
- if (rnp->qsmask != 0) {
+ if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
/* Other bits still set at this level, so done. */
spin_unlock_irqrestore(&rnp->lock, flags);
@@ -714,14 +768,10 @@
/*
* Get here if we are the last CPU to pass through a quiescent
- * state for this grace period. Clean up and let rcu_start_gp()
- * start up the next grace period if one is needed. Note that
- * we still hold rnp->lock, as required by rcu_start_gp(), which
- * will release it.
+ * state for this grace period. Invoke cpu_quiet_msk_finish()
+ * to clean up and start the next grace period if one is needed.
*/
- rsp->completed = rsp->gpnum;
- rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
- rcu_start_gp(rsp, flags); /* releases rnp->lock. */
+ cpu_quiet_msk_finish(rsp, flags); /* releases rnp->lock. */
}
/*
@@ -828,11 +878,12 @@
spin_lock(&rnp->lock); /* irqs already disabled. */
rnp->qsmaskinit &= ~mask;
if (rnp->qsmaskinit != 0) {
- spin_unlock(&rnp->lock); /* irqs already disabled. */
+ spin_unlock(&rnp->lock); /* irqs remain disabled. */
break;
}
+ rcu_preempt_offline_tasks(rsp, rnp);
mask = rnp->grpmask;
- spin_unlock(&rnp->lock); /* irqs already disabled. */
+ spin_unlock(&rnp->lock); /* irqs remain disabled. */
rnp = rnp->parent;
} while (rnp != NULL);
lastcomp = rsp->completed;
@@ -845,7 +896,7 @@
/*
* Move callbacks from the outgoing CPU to the running CPU.
* Note that the outgoing CPU is now quiscent, so it is now
- * (uncharacteristically) safe to access it rcu_data structure.
+ * (uncharacteristically) safe to access its rcu_data structure.
* Note also that we must carefully retain the order of the
* outgoing CPU's callbacks in order for rcu_barrier() to work
* correctly. Finally, note that we start all the callbacks
@@ -876,8 +927,9 @@
*/
static void rcu_offline_cpu(int cpu)
{
- __rcu_offline_cpu(cpu, &rcu_state);
+ __rcu_offline_cpu(cpu, &rcu_sched_state);
__rcu_offline_cpu(cpu, &rcu_bh_state);
+ rcu_preempt_offline_cpu(cpu);
}
#else /* #ifdef CONFIG_HOTPLUG_CPU */
@@ -963,6 +1015,8 @@
*/
void rcu_check_callbacks(int cpu, int user)
{
+ if (!rcu_pending(cpu))
+ return; /* if nothing for RCU to do. */
if (user ||
(idle_cpu(cpu) && rcu_scheduler_active &&
!in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
@@ -971,17 +1025,16 @@
* Get here if this CPU took its interrupt from user
* mode or from the idle loop, and if this is not a
* nested interrupt. In this case, the CPU is in
- * a quiescent state, so count it.
+ * a quiescent state, so note it.
*
* No memory barrier is required here because both
- * rcu_qsctr_inc() and rcu_bh_qsctr_inc() reference
- * only CPU-local variables that other CPUs neither
- * access nor modify, at least not while the corresponding
- * CPU is online.
+ * rcu_sched_qs() and rcu_bh_qs() reference only CPU-local
+ * variables that other CPUs neither access nor modify,
+ * at least not while the corresponding CPU is online.
*/
- rcu_qsctr_inc(cpu);
- rcu_bh_qsctr_inc(cpu);
+ rcu_sched_qs(cpu);
+ rcu_bh_qs(cpu);
} else if (!in_softirq()) {
@@ -989,11 +1042,12 @@
* Get here if this CPU did not take its interrupt from
* softirq, in other words, if it is not interrupting
* a rcu_bh read-side critical section. This is an _bh
- * critical section, so count it.
+ * critical section, so note it.
*/
- rcu_bh_qsctr_inc(cpu);
+ rcu_bh_qs(cpu);
}
+ rcu_preempt_check_callbacks(cpu);
raise_softirq(RCU_SOFTIRQ);
}
@@ -1132,6 +1186,8 @@
{
unsigned long flags;
+ WARN_ON_ONCE(rdp->beenonline == 0);
+
/*
* If an RCU GP has gone long enough, go check for dyntick
* idle CPUs and, if needed, send resched IPIs.
@@ -1170,8 +1226,10 @@
*/
smp_mb(); /* See above block comment. */
- __rcu_process_callbacks(&rcu_state, &__get_cpu_var(rcu_data));
+ __rcu_process_callbacks(&rcu_sched_state,
+ &__get_cpu_var(rcu_sched_data));
__rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
+ rcu_preempt_process_callbacks();
/*
* Memory references from any later RCU read-side critical sections
@@ -1227,13 +1285,13 @@
}
/*
- * Queue an RCU callback for invocation after a grace period.
+ * Queue an RCU-sched callback for invocation after a grace period.
*/
-void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
{
- __call_rcu(head, func, &rcu_state);
+ __call_rcu(head, func, &rcu_sched_state);
}
-EXPORT_SYMBOL_GPL(call_rcu);
+EXPORT_SYMBOL_GPL(call_rcu_sched);
/*
* Queue an RCU for invocation after a quicker grace period.
@@ -1305,10 +1363,11 @@
* by the current CPU, returning 1 if so. This function is part of the
* RCU implementation; it is -not- an exported member of the RCU API.
*/
-int rcu_pending(int cpu)
+static int rcu_pending(int cpu)
{
- return __rcu_pending(&rcu_state, &per_cpu(rcu_data, cpu)) ||
- __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu));
+ return __rcu_pending(&rcu_sched_state, &per_cpu(rcu_sched_data, cpu)) ||
+ __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu)) ||
+ rcu_preempt_pending(cpu);
}
/*
@@ -1320,27 +1379,46 @@
int rcu_needs_cpu(int cpu)
{
/* RCU callbacks either ready or pending? */
- return per_cpu(rcu_data, cpu).nxtlist ||
- per_cpu(rcu_bh_data, cpu).nxtlist;
+ return per_cpu(rcu_sched_data, cpu).nxtlist ||
+ per_cpu(rcu_bh_data, cpu).nxtlist ||
+ rcu_preempt_needs_cpu(cpu);
}
/*
- * Initialize a CPU's per-CPU RCU data. We take this "scorched earth"
- * approach so that we don't have to worry about how long the CPU has
- * been gone, or whether it ever was online previously. We do trust the
- * ->mynode field, as it is constant for a given struct rcu_data and
- * initialized during early boot.
- *
- * Note that only one online or offline event can be happening at a given
- * time. Note also that we can accept some slop in the rsp->completed
- * access due to the fact that this CPU cannot possibly have any RCU
- * callbacks in flight yet.
+ * Do boot-time initialization of a CPU's per-CPU RCU data.
*/
-static void __cpuinit
-rcu_init_percpu_data(int cpu, struct rcu_state *rsp)
+static void __init
+rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
{
unsigned long flags;
int i;
+ struct rcu_data *rdp = rsp->rda[cpu];
+ struct rcu_node *rnp = rcu_get_root(rsp);
+
+ /* Set up local state, ensuring consistent view of global state. */
+ spin_lock_irqsave(&rnp->lock, flags);
+ rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo);
+ rdp->nxtlist = NULL;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ rdp->nxttail[i] = &rdp->nxtlist;
+ rdp->qlen = 0;
+#ifdef CONFIG_NO_HZ
+ rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
+#endif /* #ifdef CONFIG_NO_HZ */
+ rdp->cpu = cpu;
+ spin_unlock_irqrestore(&rnp->lock, flags);
+}
+
+/*
+ * Initialize a CPU's per-CPU RCU data. Note that only one online or
+ * offline event can be happening at a given time. Note also that we
+ * can accept some slop in the rsp->completed access due to the fact
+ * that this CPU cannot possibly have any RCU callbacks in flight yet.
+ */
+static void __cpuinit
+rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
+{
+ unsigned long flags;
long lastcomp;
unsigned long mask;
struct rcu_data *rdp = rsp->rda[cpu];
@@ -1354,17 +1432,9 @@
rdp->passed_quiesc = 0; /* We could be racing with new GP, */
rdp->qs_pending = 1; /* so set up to respond to current GP. */
rdp->beenonline = 1; /* We have now been online. */
+ rdp->preemptable = preemptable;
rdp->passed_quiesc_completed = lastcomp - 1;
- rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo);
- rdp->nxtlist = NULL;
- for (i = 0; i < RCU_NEXT_SIZE; i++)
- rdp->nxttail[i] = &rdp->nxtlist;
- rdp->qlen = 0;
rdp->blimit = blimit;
-#ifdef CONFIG_NO_HZ
- rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
-#endif /* #ifdef CONFIG_NO_HZ */
- rdp->cpu = cpu;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
/*
@@ -1405,16 +1475,16 @@
static void __cpuinit rcu_online_cpu(int cpu)
{
- rcu_init_percpu_data(cpu, &rcu_state);
- rcu_init_percpu_data(cpu, &rcu_bh_state);
- open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+ rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
+ rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
+ rcu_preempt_init_percpu_data(cpu);
}
/*
- * Handle CPU online/offline notifcation events.
+ * Handle CPU online/offline notification events.
*/
-static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
+int __cpuinit rcu_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
@@ -1486,6 +1556,7 @@
rnp = rsp->level[i];
for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
spin_lock_init(&rnp->lock);
+ rnp->gpnum = 0;
rnp->qsmask = 0;
rnp->qsmaskinit = 0;
rnp->grplo = j * cpustride;
@@ -1503,16 +1574,20 @@
j / rsp->levelspread[i - 1];
}
rnp->level = i;
+ INIT_LIST_HEAD(&rnp->blocked_tasks[0]);
+ INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
}
}
}
/*
- * Helper macro for __rcu_init(). To be used nowhere else!
- * Assigns leaf node pointers into each CPU's rcu_data structure.
+ * Helper macro for __rcu_init() and __rcu_init_preempt(). To be used
+ * nowhere else! Assigns leaf node pointers into each CPU's rcu_data
+ * structure.
*/
-#define RCU_DATA_PTR_INIT(rsp, rcu_data) \
+#define RCU_INIT_FLAVOR(rsp, rcu_data) \
do { \
+ rcu_init_one(rsp); \
rnp = (rsp)->level[NUM_RCU_LVLS - 1]; \
j = 0; \
for_each_possible_cpu(i) { \
@@ -1520,32 +1595,43 @@
j++; \
per_cpu(rcu_data, i).mynode = &rnp[j]; \
(rsp)->rda[i] = &per_cpu(rcu_data, i); \
+ rcu_boot_init_percpu_data(i, rsp); \
} \
} while (0)
-static struct notifier_block __cpuinitdata rcu_nb = {
- .notifier_call = rcu_cpu_notify,
-};
+#ifdef CONFIG_TREE_PREEMPT_RCU
-void __init __rcu_init(void)
+void __init __rcu_init_preempt(void)
{
- int i; /* All used by RCU_DATA_PTR_INIT(). */
+ int i; /* All used by RCU_INIT_FLAVOR(). */
int j;
struct rcu_node *rnp;
- printk(KERN_INFO "Hierarchical RCU implementation.\n");
+ RCU_INIT_FLAVOR(&rcu_preempt_state, rcu_preempt_data);
+}
+
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+void __init __rcu_init_preempt(void)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+void __init __rcu_init(void)
+{
+ int i; /* All used by RCU_INIT_FLAVOR(). */
+ int j;
+ struct rcu_node *rnp;
+
+ rcu_bootup_announce();
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
- rcu_init_one(&rcu_state);
- RCU_DATA_PTR_INIT(&rcu_state, rcu_data);
- rcu_init_one(&rcu_bh_state);
- RCU_DATA_PTR_INIT(&rcu_bh_state, rcu_bh_data);
-
- for_each_online_cpu(i)
- rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long)i);
- /* Register notifier for non-boot CPUs */
- register_cpu_notifier(&rcu_nb);
+ RCU_INIT_FLAVOR(&rcu_sched_state, rcu_sched_data);
+ RCU_INIT_FLAVOR(&rcu_bh_state, rcu_bh_data);
+ __rcu_init_preempt();
+ open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
}
module_param(blimit, int, 0);
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 5e872bb..bf8a6f9 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -1,10 +1,259 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion (tree-based version)
+ * Internal non-public definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Author: Ingo Molnar <mingo@elte.hu>
+ * Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ */
+
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/seqlock.h>
+
+/*
+ * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT.
+ * In theory, it should be possible to add more levels straightforwardly.
+ * In practice, this has not been tested, so there is probably some
+ * bug somewhere.
+ */
+#define MAX_RCU_LVLS 3
+#define RCU_FANOUT (CONFIG_RCU_FANOUT)
+#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT)
+#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT)
+
+#if NR_CPUS <= RCU_FANOUT
+# define NUM_RCU_LVLS 1
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 (NR_CPUS)
+# define NUM_RCU_LVL_2 0
+# define NUM_RCU_LVL_3 0
+#elif NR_CPUS <= RCU_FANOUT_SQ
+# define NUM_RCU_LVLS 2
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT)
+# define NUM_RCU_LVL_2 (NR_CPUS)
+# define NUM_RCU_LVL_3 0
+#elif NR_CPUS <= RCU_FANOUT_CUBE
+# define NUM_RCU_LVLS 3
+# define NUM_RCU_LVL_0 1
+# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ)
+# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT))
+# define NUM_RCU_LVL_3 NR_CPUS
+#else
+# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
+#endif /* #if (NR_CPUS) <= RCU_FANOUT */
+
+#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
+#define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
+
+/*
+ * Dynticks per-CPU state.
+ */
+struct rcu_dynticks {
+ int dynticks_nesting; /* Track nesting level, sort of. */
+ int dynticks; /* Even value for dynticks-idle, else odd. */
+ int dynticks_nmi; /* Even value for either dynticks-idle or */
+ /* not in nmi handler, else odd. So this */
+ /* remains even for nmi from irq handler. */
+};
+
+/*
+ * Definition for node within the RCU grace-period-detection hierarchy.
+ */
+struct rcu_node {
+ spinlock_t lock;
+ long gpnum; /* Current grace period for this node. */
+ /* This will either be equal to or one */
+ /* behind the root rcu_node's gpnum. */
+ unsigned long qsmask; /* CPUs or groups that need to switch in */
+ /* order for current grace period to proceed.*/
+ unsigned long qsmaskinit;
+ /* Per-GP initialization for qsmask. */
+ unsigned long grpmask; /* Mask to apply to parent qsmask. */
+ int grplo; /* lowest-numbered CPU or group here. */
+ int grphi; /* highest-numbered CPU or group here. */
+ u8 grpnum; /* CPU/group number for next level up. */
+ u8 level; /* root is at level 0. */
+ struct rcu_node *parent;
+ struct list_head blocked_tasks[2];
+ /* Tasks blocked in RCU read-side critsect. */
+} ____cacheline_internodealigned_in_smp;
+
+/* Index values for nxttail array in struct rcu_data. */
+#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */
+#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */
+#define RCU_NEXT_READY_TAIL 2 /* Also RCU_NEXT head. */
+#define RCU_NEXT_TAIL 3
+#define RCU_NEXT_SIZE 4
+
+/* Per-CPU data for read-copy update. */
+struct rcu_data {
+ /* 1) quiescent-state and grace-period handling : */
+ long completed; /* Track rsp->completed gp number */
+ /* in order to detect GP end. */
+ long gpnum; /* Highest gp number that this CPU */
+ /* is aware of having started. */
+ long passed_quiesc_completed;
+ /* Value of completed at time of qs. */
+ bool passed_quiesc; /* User-mode/idle loop etc. */
+ bool qs_pending; /* Core waits for quiesc state. */
+ bool beenonline; /* CPU online at least once. */
+ bool preemptable; /* Preemptable RCU? */
+ struct rcu_node *mynode; /* This CPU's leaf of hierarchy */
+ unsigned long grpmask; /* Mask to apply to leaf qsmask. */
+
+ /* 2) batch handling */
+ /*
+ * If nxtlist is not NULL, it is partitioned as follows.
+ * Any of the partitions might be empty, in which case the
+ * pointer to that partition will be equal to the pointer for
+ * the following partition. When the list is empty, all of
+ * the nxttail elements point to nxtlist, which is NULL.
+ *
+ * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]):
+ * Entries that might have arrived after current GP ended
+ * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
+ * Entries known to have arrived before current GP ended
+ * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
+ * Entries that batch # <= ->completed - 1: waiting for current GP
+ * [nxtlist, *nxttail[RCU_DONE_TAIL]):
+ * Entries that batch # <= ->completed
+ * The grace period for these entries has completed, and
+ * the other grace-period-completed entries may be moved
+ * here temporarily in rcu_process_callbacks().
+ */
+ struct rcu_head *nxtlist;
+ struct rcu_head **nxttail[RCU_NEXT_SIZE];
+ long qlen; /* # of queued callbacks */
+ long blimit; /* Upper limit on a processed batch */
+
+#ifdef CONFIG_NO_HZ
+ /* 3) dynticks interface. */
+ struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */
+ int dynticks_snap; /* Per-GP tracking for dynticks. */
+ int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */
+#endif /* #ifdef CONFIG_NO_HZ */
+
+ /* 4) reasons this CPU needed to be kicked by force_quiescent_state */
+#ifdef CONFIG_NO_HZ
+ unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */
+#endif /* #ifdef CONFIG_NO_HZ */
+ unsigned long offline_fqs; /* Kicked due to being offline. */
+ unsigned long resched_ipi; /* Sent a resched IPI. */
+
+ /* 5) __rcu_pending() statistics. */
+ long n_rcu_pending; /* rcu_pending() calls since boot. */
+ long n_rp_qs_pending;
+ long n_rp_cb_ready;
+ long n_rp_cpu_needs_gp;
+ long n_rp_gp_completed;
+ long n_rp_gp_started;
+ long n_rp_need_fqs;
+ long n_rp_need_nothing;
+
+ int cpu;
+};
+
+/* Values for signaled field in struct rcu_state. */
+#define RCU_GP_INIT 0 /* Grace period being initialized. */
+#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */
+#define RCU_FORCE_QS 2 /* Need to force quiescent state. */
+#ifdef CONFIG_NO_HZ
+#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK
+#else /* #ifdef CONFIG_NO_HZ */
+#define RCU_SIGNAL_INIT RCU_FORCE_QS
+#endif /* #else #ifdef CONFIG_NO_HZ */
+
+#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rsp->jiffies_stall */
+#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rsp->jiffies_stall */
+#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */
+ /* to take at least one */
+ /* scheduling clock irq */
+ /* before ratting on them. */
+
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+
+/*
+ * RCU global state, including node hierarchy. This hierarchy is
+ * represented in "heap" form in a dense array. The root (first level)
+ * of the hierarchy is in ->node[0] (referenced by ->level[0]), the second
+ * level in ->node[1] through ->node[m] (->node[1] referenced by ->level[1]),
+ * and the third level in ->node[m+1] and following (->node[m+1] referenced
+ * by ->level[2]). The number of levels is determined by the number of
+ * CPUs and by CONFIG_RCU_FANOUT. Small systems will have a "hierarchy"
+ * consisting of a single rcu_node.
+ */
+struct rcu_state {
+ struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */
+ struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */
+ u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */
+ u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */
+ struct rcu_data *rda[NR_CPUS]; /* array of rdp pointers. */
+
+ /* The following fields are guarded by the root rcu_node's lock. */
+
+ u8 signaled ____cacheline_internodealigned_in_smp;
+ /* Force QS state. */
+ long gpnum; /* Current gp number. */
+ long completed; /* # of last completed gp. */
+ spinlock_t onofflock; /* exclude on/offline and */
+ /* starting new GP. */
+ spinlock_t fqslock; /* Only one task forcing */
+ /* quiescent states. */
+ unsigned long jiffies_force_qs; /* Time at which to invoke */
+ /* force_quiescent_state(). */
+ unsigned long n_force_qs; /* Number of calls to */
+ /* force_quiescent_state(). */
+ unsigned long n_force_qs_lh; /* ~Number of calls leaving */
+ /* due to lock unavailable. */
+ unsigned long n_force_qs_ngp; /* Number of calls leaving */
+ /* due to no GP active. */
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+ unsigned long gp_start; /* Time at which GP started, */
+ /* but in jiffies. */
+ unsigned long jiffies_stall; /* Time at which to check */
+ /* for CPU stalls. */
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+#ifdef CONFIG_NO_HZ
+ long dynticks_completed; /* Value of completed @ snap. */
+#endif /* #ifdef CONFIG_NO_HZ */
+};
+
+#ifdef RCU_TREE_NONCORE
/*
* RCU implementation internal declarations:
*/
-extern struct rcu_state rcu_state;
-DECLARE_PER_CPU(struct rcu_data, rcu_data);
+extern struct rcu_state rcu_sched_state;
+DECLARE_PER_CPU(struct rcu_data, rcu_sched_data);
extern struct rcu_state rcu_bh_state;
DECLARE_PER_CPU(struct rcu_data, rcu_bh_data);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+extern struct rcu_state rcu_preempt_state;
+DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+#endif /* #ifdef RCU_TREE_NONCORE */
+
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
new file mode 100644
index 0000000..4778936
--- /dev/null
+++ b/kernel/rcutree_plugin.h
@@ -0,0 +1,532 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion (tree-based version)
+ * Internal non-public definitions that provide either classic
+ * or preemptable semantics.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright Red Hat, 2009
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Ingo Molnar <mingo@elte.hu>
+ * Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ */
+
+
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
+DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
+
+/*
+ * Tell them what RCU they are running.
+ */
+static inline void rcu_bootup_announce(void)
+{
+ printk(KERN_INFO
+ "Experimental preemptable hierarchical RCU implementation.\n");
+}
+
+/*
+ * Return the number of RCU-preempt batches processed thus far
+ * for debug and statistics.
+ */
+long rcu_batches_completed_preempt(void)
+{
+ return rcu_preempt_state.completed;
+}
+EXPORT_SYMBOL_GPL(rcu_batches_completed_preempt);
+
+/*
+ * Return the number of RCU batches processed thus far for debug & stats.
+ */
+long rcu_batches_completed(void)
+{
+ return rcu_batches_completed_preempt();
+}
+EXPORT_SYMBOL_GPL(rcu_batches_completed);
+
+/*
+ * Record a preemptable-RCU quiescent state for the specified CPU. Note
+ * that this just means that the task currently running on the CPU is
+ * not in a quiescent state. There might be any number of tasks blocked
+ * while in an RCU read-side critical section.
+ */
+static void rcu_preempt_qs_record(int cpu)
+{
+ struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);
+ rdp->passed_quiesc = 1;
+ rdp->passed_quiesc_completed = rdp->completed;
+}
+
+/*
+ * We have entered the scheduler or are between softirqs in ksoftirqd.
+ * If we are in an RCU read-side critical section, we need to reflect
+ * that in the state of the rcu_node structure corresponding to this CPU.
+ * Caller must disable hardirqs.
+ */
+static void rcu_preempt_qs(int cpu)
+{
+ struct task_struct *t = current;
+ int phase;
+ struct rcu_data *rdp;
+ struct rcu_node *rnp;
+
+ if (t->rcu_read_lock_nesting &&
+ (t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
+
+ /* Possibly blocking in an RCU read-side critical section. */
+ rdp = rcu_preempt_state.rda[cpu];
+ rnp = rdp->mynode;
+ spin_lock(&rnp->lock);
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
+ t->rcu_blocked_node = rnp;
+
+ /*
+ * If this CPU has already checked in, then this task
+ * will hold up the next grace period rather than the
+ * current grace period. Queue the task accordingly.
+ * If the task is queued for the current grace period
+ * (i.e., this CPU has not yet passed through a quiescent
+ * state for the current grace period), then as long
+ * as that task remains queued, the current grace period
+ * cannot end.
+ */
+ phase = !(rnp->qsmask & rdp->grpmask) ^ (rnp->gpnum & 0x1);
+ list_add(&t->rcu_node_entry, &rnp->blocked_tasks[phase]);
+ smp_mb(); /* Ensure later ctxt swtch seen after above. */
+ spin_unlock(&rnp->lock);
+ }
+
+ /*
+ * Either we were not in an RCU read-side critical section to
+ * begin with, or we have now recorded that critical section
+ * globally. Either way, we can now note a quiescent state
+ * for this CPU. Again, if we were in an RCU read-side critical
+ * section, and if that critical section was blocking the current
+ * grace period, then the fact that the task has been enqueued
+ * means that we continue to block the current grace period.
+ */
+ rcu_preempt_qs_record(cpu);
+ t->rcu_read_unlock_special &= ~(RCU_READ_UNLOCK_NEED_QS |
+ RCU_READ_UNLOCK_GOT_QS);
+}
+
+/*
+ * Tree-preemptable RCU implementation for rcu_read_lock().
+ * Just increment ->rcu_read_lock_nesting, shared state will be updated
+ * if we block.
+ */
+void __rcu_read_lock(void)
+{
+ ACCESS_ONCE(current->rcu_read_lock_nesting)++;
+ barrier(); /* needed if we ever invoke rcu_read_lock in rcutree.c */
+}
+EXPORT_SYMBOL_GPL(__rcu_read_lock);
+
+static void rcu_read_unlock_special(struct task_struct *t)
+{
+ int empty;
+ unsigned long flags;
+ unsigned long mask;
+ struct rcu_node *rnp;
+ int special;
+
+ /* NMI handlers cannot block and cannot safely manipulate state. */
+ if (in_nmi())
+ return;
+
+ local_irq_save(flags);
+
+ /*
+ * If RCU core is waiting for this CPU to exit critical section,
+ * let it know that we have done so.
+ */
+ special = t->rcu_read_unlock_special;
+ if (special & RCU_READ_UNLOCK_NEED_QS) {
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_GOT_QS;
+ }
+
+ /* Hardware IRQ handlers cannot block. */
+ if (in_irq()) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* Clean up if blocked during RCU read-side critical section. */
+ if (special & RCU_READ_UNLOCK_BLOCKED) {
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BLOCKED;
+
+ /*
+ * Remove this task from the list it blocked on. The
+ * task can migrate while we acquire the lock, but at
+ * most one time. So at most two passes through loop.
+ */
+ for (;;) {
+ rnp = t->rcu_blocked_node;
+ spin_lock(&rnp->lock);
+ if (rnp == t->rcu_blocked_node)
+ break;
+ spin_unlock(&rnp->lock);
+ }
+ empty = list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+ list_del_init(&t->rcu_node_entry);
+ t->rcu_blocked_node = NULL;
+
+ /*
+ * If this was the last task on the current list, and if
+ * we aren't waiting on any CPUs, report the quiescent state.
+ * Note that both cpu_quiet_msk_finish() and cpu_quiet_msk()
+ * drop rnp->lock and restore irq.
+ */
+ if (!empty && rnp->qsmask == 0 &&
+ list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1])) {
+ t->rcu_read_unlock_special &=
+ ~(RCU_READ_UNLOCK_NEED_QS |
+ RCU_READ_UNLOCK_GOT_QS);
+ if (rnp->parent == NULL) {
+ /* Only one rcu_node in the tree. */
+ cpu_quiet_msk_finish(&rcu_preempt_state, flags);
+ return;
+ }
+ /* Report up the rest of the hierarchy. */
+ mask = rnp->grpmask;
+ spin_unlock_irqrestore(&rnp->lock, flags);
+ rnp = rnp->parent;
+ spin_lock_irqsave(&rnp->lock, flags);
+ cpu_quiet_msk(mask, &rcu_preempt_state, rnp, flags);
+ return;
+ }
+ spin_unlock(&rnp->lock);
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * Tree-preemptable RCU implementation for rcu_read_unlock().
+ * Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
+ * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
+ * invoke rcu_read_unlock_special() to clean up after a context switch
+ * in an RCU read-side critical section and other special cases.
+ */
+void __rcu_read_unlock(void)
+{
+ struct task_struct *t = current;
+
+ barrier(); /* needed if we ever invoke rcu_read_unlock in rcutree.c */
+ if (--ACCESS_ONCE(t->rcu_read_lock_nesting) == 0 &&
+ unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
+ rcu_read_unlock_special(t);
+}
+EXPORT_SYMBOL_GPL(__rcu_read_unlock);
+
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+
+/*
+ * Scan the current list of tasks blocked within RCU read-side critical
+ * sections, printing out the tid of each.
+ */
+static void rcu_print_task_stall(struct rcu_node *rnp)
+{
+ unsigned long flags;
+ struct list_head *lp;
+ int phase = rnp->gpnum & 0x1;
+ struct task_struct *t;
+
+ if (!list_empty(&rnp->blocked_tasks[phase])) {
+ spin_lock_irqsave(&rnp->lock, flags);
+ phase = rnp->gpnum & 0x1; /* re-read under lock. */
+ lp = &rnp->blocked_tasks[phase];
+ list_for_each_entry(t, lp, rcu_node_entry)
+ printk(" P%d", t->pid);
+ spin_unlock_irqrestore(&rnp->lock, flags);
+ }
+}
+
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+
+/*
+ * Check for preempted RCU readers for the specified rcu_node structure.
+ * If the caller needs a reliable answer, it must hold the rcu_node's
+ * >lock.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+ return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Handle tasklist migration for case in which all CPUs covered by the
+ * specified rcu_node have gone offline. Move them up to the root
+ * rcu_node. The reason for not just moving them to the immediate
+ * parent is to remove the need for rcu_read_unlock_special() to
+ * make more than two attempts to acquire the target rcu_node's lock.
+ *
+ * The caller must hold rnp->lock with irqs disabled.
+ */
+static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+ int i;
+ struct list_head *lp;
+ struct list_head *lp_root;
+ struct rcu_node *rnp_root = rcu_get_root(rsp);
+ struct task_struct *tp;
+
+ if (rnp == rnp_root) {
+ WARN_ONCE(1, "Last CPU thought to be offlined?");
+ return; /* Shouldn't happen: at least one CPU online. */
+ }
+
+ /*
+ * Move tasks up to root rcu_node. Rely on the fact that the
+ * root rcu_node can be at most one ahead of the rest of the
+ * rcu_nodes in terms of gp_num value. This fact allows us to
+ * move the blocked_tasks[] array directly, element by element.
+ */
+ for (i = 0; i < 2; i++) {
+ lp = &rnp->blocked_tasks[i];
+ lp_root = &rnp_root->blocked_tasks[i];
+ while (!list_empty(lp)) {
+ tp = list_entry(lp->next, typeof(*tp), rcu_node_entry);
+ spin_lock(&rnp_root->lock); /* irqs already disabled */
+ list_del(&tp->rcu_node_entry);
+ tp->rcu_blocked_node = rnp_root;
+ list_add(&tp->rcu_node_entry, lp_root);
+ spin_unlock(&rnp_root->lock); /* irqs remain disabled */
+ }
+ }
+}
+
+/*
+ * Do CPU-offline processing for preemptable RCU.
+ */
+static void rcu_preempt_offline_cpu(int cpu)
+{
+ __rcu_offline_cpu(cpu, &rcu_preempt_state);
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+/*
+ * Check for a quiescent state from the current CPU. When a task blocks,
+ * the task is recorded in the corresponding CPU's rcu_node structure,
+ * which is checked elsewhere.
+ *
+ * Caller must disable hard irqs.
+ */
+static void rcu_preempt_check_callbacks(int cpu)
+{
+ struct task_struct *t = current;
+
+ if (t->rcu_read_lock_nesting == 0) {
+ t->rcu_read_unlock_special &=
+ ~(RCU_READ_UNLOCK_NEED_QS | RCU_READ_UNLOCK_GOT_QS);
+ rcu_preempt_qs_record(cpu);
+ return;
+ }
+ if (per_cpu(rcu_preempt_data, cpu).qs_pending) {
+ if (t->rcu_read_unlock_special & RCU_READ_UNLOCK_GOT_QS) {
+ rcu_preempt_qs_record(cpu);
+ t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_GOT_QS;
+ } else if (!(t->rcu_read_unlock_special &
+ RCU_READ_UNLOCK_NEED_QS)) {
+ t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS;
+ }
+ }
+}
+
+/*
+ * Process callbacks for preemptable RCU.
+ */
+static void rcu_preempt_process_callbacks(void)
+{
+ __rcu_process_callbacks(&rcu_preempt_state,
+ &__get_cpu_var(rcu_preempt_data));
+}
+
+/*
+ * Queue a preemptable-RCU callback for invocation after a grace period.
+ */
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+ __call_rcu(head, func, &rcu_preempt_state);
+}
+EXPORT_SYMBOL_GPL(call_rcu);
+
+/*
+ * Check to see if there is any immediate preemptable-RCU-related work
+ * to be done.
+ */
+static int rcu_preempt_pending(int cpu)
+{
+ return __rcu_pending(&rcu_preempt_state,
+ &per_cpu(rcu_preempt_data, cpu));
+}
+
+/*
+ * Does preemptable RCU need the CPU to stay out of dynticks mode?
+ */
+static int rcu_preempt_needs_cpu(int cpu)
+{
+ return !!per_cpu(rcu_preempt_data, cpu).nxtlist;
+}
+
+/*
+ * Initialize preemptable RCU's per-CPU data.
+ */
+static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
+{
+ rcu_init_percpu_data(cpu, &rcu_preempt_state, 1);
+}
+
+/*
+ * Check for a task exiting while in a preemptable-RCU read-side
+ * critical section, clean up if so. No need to issue warnings,
+ * as debug_check_no_locks_held() already does this if lockdep
+ * is enabled.
+ */
+void exit_rcu(void)
+{
+ struct task_struct *t = current;
+
+ if (t->rcu_read_lock_nesting == 0)
+ return;
+ t->rcu_read_lock_nesting = 1;
+ rcu_read_unlock();
+}
+
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+/*
+ * Tell them what RCU they are running.
+ */
+static inline void rcu_bootup_announce(void)
+{
+ printk(KERN_INFO "Hierarchical RCU implementation.\n");
+}
+
+/*
+ * Return the number of RCU batches processed thus far for debug & stats.
+ */
+long rcu_batches_completed(void)
+{
+ return rcu_batches_completed_sched();
+}
+EXPORT_SYMBOL_GPL(rcu_batches_completed);
+
+/*
+ * Because preemptable RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_qs(int cpu)
+{
+}
+
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+
+/*
+ * Because preemptable RCU does not exist, we never have to check for
+ * tasks blocked within RCU read-side critical sections.
+ */
+static void rcu_print_task_stall(struct rcu_node *rnp)
+{
+}
+
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+
+/*
+ * Because preemptable RCU does not exist, there are never any preempted
+ * RCU readers.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+ return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Because preemptable RCU does not exist, it never needs to migrate
+ * tasks that were blocked within RCU read-side critical sections.
+ */
+static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, it never needs CPU-offline
+ * processing.
+ */
+static void rcu_preempt_offline_cpu(int cpu)
+{
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+/*
+ * Because preemptable RCU does not exist, it never has any callbacks
+ * to check.
+ */
+void rcu_preempt_check_callbacks(int cpu)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, it never has any callbacks
+ * to process.
+ */
+void rcu_preempt_process_callbacks(void)
+{
+}
+
+/*
+ * In classic RCU, call_rcu() is just call_rcu_sched().
+ */
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+ call_rcu_sched(head, func);
+}
+EXPORT_SYMBOL_GPL(call_rcu);
+
+/*
+ * Because preemptable RCU does not exist, it never has any work to do.
+ */
+static int rcu_preempt_pending(int cpu)
+{
+ return 0;
+}
+
+/*
+ * Because preemptable RCU does not exist, it never needs any CPU.
+ */
+static int rcu_preempt_needs_cpu(int cpu)
+{
+ return 0;
+}
+
+/*
+ * Because preemptable RCU does not exist, there is no per-CPU
+ * data to initialize.
+ */
+static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index fe1dcdb..0ea1bff 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -43,6 +43,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#define RCU_TREE_NONCORE
#include "rcutree.h"
static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
@@ -76,8 +77,12 @@
static int show_rcudata(struct seq_file *m, void *unused)
{
- seq_puts(m, "rcu:\n");
- PRINT_RCU_DATA(rcu_data, print_one_rcu_data, m);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "rcu_preempt:\n");
+ PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data, m);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "rcu_sched:\n");
+ PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data, m);
seq_puts(m, "rcu_bh:\n");
PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data, m);
return 0;
@@ -102,7 +107,7 @@
return;
seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
rdp->cpu,
- cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
+ cpu_is_offline(rdp->cpu) ? "\"N\"" : "\"Y\"",
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
rdp->qs_pending);
@@ -124,8 +129,12 @@
seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\"\n");
- seq_puts(m, "\"rcu:\"\n");
- PRINT_RCU_DATA(rcu_data, print_one_rcu_data_csv, m);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "\"rcu_preempt:\"\n");
+ PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data_csv, m);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "\"rcu_sched:\"\n");
+ PRINT_RCU_DATA(rcu_sched_data, print_one_rcu_data_csv, m);
seq_puts(m, "\"rcu_bh:\"\n");
PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data_csv, m);
return 0;
@@ -171,8 +180,12 @@
static int show_rcuhier(struct seq_file *m, void *unused)
{
- seq_puts(m, "rcu:\n");
- print_one_rcu_state(m, &rcu_state);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "rcu_preempt:\n");
+ print_one_rcu_state(m, &rcu_preempt_state);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "rcu_sched:\n");
+ print_one_rcu_state(m, &rcu_sched_state);
seq_puts(m, "rcu_bh:\n");
print_one_rcu_state(m, &rcu_bh_state);
return 0;
@@ -193,8 +206,12 @@
static int show_rcugp(struct seq_file *m, void *unused)
{
- seq_printf(m, "rcu: completed=%ld gpnum=%ld\n",
- rcu_state.completed, rcu_state.gpnum);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_printf(m, "rcu_preempt: completed=%ld gpnum=%ld\n",
+ rcu_preempt_state.completed, rcu_preempt_state.gpnum);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_printf(m, "rcu_sched: completed=%ld gpnum=%ld\n",
+ rcu_sched_state.completed, rcu_sched_state.gpnum);
seq_printf(m, "rcu_bh: completed=%ld gpnum=%ld\n",
rcu_bh_state.completed, rcu_bh_state.gpnum);
return 0;
@@ -243,8 +260,12 @@
static int show_rcu_pending(struct seq_file *m, void *unused)
{
- seq_puts(m, "rcu:\n");
- print_rcu_pendings(m, &rcu_state);
+#ifdef CONFIG_TREE_PREEMPT_RCU
+ seq_puts(m, "rcu_preempt:\n");
+ print_rcu_pendings(m, &rcu_preempt_state);
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+ seq_puts(m, "rcu_sched:\n");
+ print_rcu_pendings(m, &rcu_sched_state);
seq_puts(m, "rcu_bh:\n");
print_rcu_pendings(m, &rcu_bh_state);
return 0;
@@ -264,62 +285,47 @@
};
static struct dentry *rcudir;
-static struct dentry *datadir;
-static struct dentry *datadir_csv;
-static struct dentry *gpdir;
-static struct dentry *hierdir;
-static struct dentry *rcu_pendingdir;
static int __init rcuclassic_trace_init(void)
{
+ struct dentry *retval;
+
rcudir = debugfs_create_dir("rcu", NULL);
if (!rcudir)
- goto out;
+ goto free_out;
- datadir = debugfs_create_file("rcudata", 0444, rcudir,
+ retval = debugfs_create_file("rcudata", 0444, rcudir,
NULL, &rcudata_fops);
- if (!datadir)
+ if (!retval)
goto free_out;
- datadir_csv = debugfs_create_file("rcudata.csv", 0444, rcudir,
+ retval = debugfs_create_file("rcudata.csv", 0444, rcudir,
NULL, &rcudata_csv_fops);
- if (!datadir_csv)
+ if (!retval)
goto free_out;
- gpdir = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
- if (!gpdir)
+ retval = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops);
+ if (!retval)
goto free_out;
- hierdir = debugfs_create_file("rcuhier", 0444, rcudir,
+ retval = debugfs_create_file("rcuhier", 0444, rcudir,
NULL, &rcuhier_fops);
- if (!hierdir)
+ if (!retval)
goto free_out;
- rcu_pendingdir = debugfs_create_file("rcu_pending", 0444, rcudir,
+ retval = debugfs_create_file("rcu_pending", 0444, rcudir,
NULL, &rcu_pending_fops);
- if (!rcu_pendingdir)
+ if (!retval)
goto free_out;
return 0;
free_out:
- if (datadir)
- debugfs_remove(datadir);
- if (datadir_csv)
- debugfs_remove(datadir_csv);
- if (gpdir)
- debugfs_remove(gpdir);
- debugfs_remove(rcudir);
-out:
+ debugfs_remove_recursive(rcudir);
return 1;
}
static void __exit rcuclassic_trace_cleanup(void)
{
- debugfs_remove(datadir);
- debugfs_remove(datadir_csv);
- debugfs_remove(gpdir);
- debugfs_remove(hierdir);
- debugfs_remove(rcu_pendingdir);
- debugfs_remove(rcudir);
+ debugfs_remove_recursive(rcudir);
}
diff --git a/kernel/sched.c b/kernel/sched.c
index 1b59e26..e27a536 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -64,7 +64,6 @@
#include <linux/tsacct_kern.h>
#include <linux/kprobes.h>
#include <linux/delayacct.h>
-#include <linux/reciprocal_div.h>
#include <linux/unistd.h>
#include <linux/pagemap.h>
#include <linux/hrtimer.h>
@@ -120,30 +119,8 @@
*/
#define RUNTIME_INF ((u64)~0ULL)
-#ifdef CONFIG_SMP
-
static void double_rq_lock(struct rq *rq1, struct rq *rq2);
-/*
- * Divide a load by a sched group cpu_power : (load / sg->__cpu_power)
- * Since cpu_power is a 'constant', we can use a reciprocal divide.
- */
-static inline u32 sg_div_cpu_power(const struct sched_group *sg, u32 load)
-{
- return reciprocal_divide(load, sg->reciprocal_cpu_power);
-}
-
-/*
- * Each time a sched group cpu_power is changed,
- * we must compute its reciprocal value
- */
-static inline void sg_inc_cpu_power(struct sched_group *sg, u32 val)
-{
- sg->__cpu_power += val;
- sg->reciprocal_cpu_power = reciprocal_value(sg->__cpu_power);
-}
-#endif
-
static inline int rt_policy(int policy)
{
if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR))
@@ -309,8 +286,8 @@
/*
* Root task group.
- * Every UID task group (including init_task_group aka UID-0) will
- * be a child to this group.
+ * Every UID task group (including init_task_group aka UID-0) will
+ * be a child to this group.
*/
struct task_group root_task_group;
@@ -318,7 +295,7 @@
/* Default task group's sched entity on each cpu */
static DEFINE_PER_CPU(struct sched_entity, init_sched_entity);
/* Default task group's cfs_rq on each cpu */
-static DEFINE_PER_CPU(struct cfs_rq, init_cfs_rq) ____cacheline_aligned_in_smp;
+static DEFINE_PER_CPU(struct cfs_rq, init_tg_cfs_rq) ____cacheline_aligned_in_smp;
#endif /* CONFIG_FAIR_GROUP_SCHED */
#ifdef CONFIG_RT_GROUP_SCHED
@@ -616,6 +593,7 @@
unsigned char idle_at_tick;
/* For active balancing */
+ int post_schedule;
int active_balance;
int push_cpu;
/* cpu of this runqueue: */
@@ -626,6 +604,9 @@
struct task_struct *migration_thread;
struct list_head migration_queue;
+
+ u64 rt_avg;
+ u64 age_stamp;
#endif
/* calc_load related fields */
@@ -693,6 +674,7 @@
#define this_rq() (&__get_cpu_var(runqueues))
#define task_rq(p) cpu_rq(task_cpu(p))
#define cpu_curr(cpu) (cpu_rq(cpu)->curr)
+#define raw_rq() (&__raw_get_cpu_var(runqueues))
inline void update_rq_clock(struct rq *rq)
{
@@ -861,6 +843,14 @@
unsigned int sysctl_sched_shares_thresh = 4;
/*
+ * period over which we average the RT time consumption, measured
+ * in ms.
+ *
+ * default: 1s
+ */
+const_debug unsigned int sysctl_sched_time_avg = MSEC_PER_SEC;
+
+/*
* period over which we measure -rt task cpu usage in us.
* default: 1s
*/
@@ -1278,12 +1268,37 @@
}
#endif /* CONFIG_NO_HZ */
+static u64 sched_avg_period(void)
+{
+ return (u64)sysctl_sched_time_avg * NSEC_PER_MSEC / 2;
+}
+
+static void sched_avg_update(struct rq *rq)
+{
+ s64 period = sched_avg_period();
+
+ while ((s64)(rq->clock - rq->age_stamp) > period) {
+ rq->age_stamp += period;
+ rq->rt_avg /= 2;
+ }
+}
+
+static void sched_rt_avg_update(struct rq *rq, u64 rt_delta)
+{
+ rq->rt_avg += rt_delta;
+ sched_avg_update(rq);
+}
+
#else /* !CONFIG_SMP */
static void resched_task(struct task_struct *p)
{
assert_spin_locked(&task_rq(p)->lock);
set_tsk_need_resched(p);
}
+
+static void sched_rt_avg_update(struct rq *rq, u64 rt_delta)
+{
+}
#endif /* CONFIG_SMP */
#if BITS_PER_LONG == 32
@@ -1513,28 +1528,35 @@
#ifdef CONFIG_FAIR_GROUP_SCHED
+struct update_shares_data {
+ unsigned long rq_weight[NR_CPUS];
+};
+
+static DEFINE_PER_CPU(struct update_shares_data, update_shares_data);
+
static void __set_se_shares(struct sched_entity *se, unsigned long shares);
/*
* Calculate and set the cpu's group shares.
*/
-static void
-update_group_shares_cpu(struct task_group *tg, int cpu,
- unsigned long sd_shares, unsigned long sd_rq_weight)
+static void update_group_shares_cpu(struct task_group *tg, int cpu,
+ unsigned long sd_shares,
+ unsigned long sd_rq_weight,
+ struct update_shares_data *usd)
{
- unsigned long shares;
- unsigned long rq_weight;
+ unsigned long shares, rq_weight;
+ int boost = 0;
- if (!tg->se[cpu])
- return;
-
- rq_weight = tg->cfs_rq[cpu]->rq_weight;
+ rq_weight = usd->rq_weight[cpu];
+ if (!rq_weight) {
+ boost = 1;
+ rq_weight = NICE_0_LOAD;
+ }
/*
- * \Sum shares * rq_weight
- * shares = -----------------------
- * \Sum rq_weight
- *
+ * \Sum_j shares_j * rq_weight_i
+ * shares_i = -----------------------------
+ * \Sum_j rq_weight_j
*/
shares = (sd_shares * rq_weight) / sd_rq_weight;
shares = clamp_t(unsigned long, shares, MIN_SHARES, MAX_SHARES);
@@ -1545,8 +1567,8 @@
unsigned long flags;
spin_lock_irqsave(&rq->lock, flags);
- tg->cfs_rq[cpu]->shares = shares;
-
+ tg->cfs_rq[cpu]->rq_weight = boost ? 0 : rq_weight;
+ tg->cfs_rq[cpu]->shares = boost ? 0 : shares;
__set_se_shares(tg->se[cpu], shares);
spin_unlock_irqrestore(&rq->lock, flags);
}
@@ -1559,22 +1581,30 @@
*/
static int tg_shares_up(struct task_group *tg, void *data)
{
- unsigned long weight, rq_weight = 0;
- unsigned long shares = 0;
+ unsigned long weight, rq_weight = 0, shares = 0;
+ struct update_shares_data *usd;
struct sched_domain *sd = data;
+ unsigned long flags;
int i;
+ if (!tg->se[0])
+ return 0;
+
+ local_irq_save(flags);
+ usd = &__get_cpu_var(update_shares_data);
+
for_each_cpu(i, sched_domain_span(sd)) {
+ weight = tg->cfs_rq[i]->load.weight;
+ usd->rq_weight[i] = weight;
+
/*
* If there are currently no tasks on the cpu pretend there
* is one of average load so that when a new task gets to
* run here it will not get delayed by group starvation.
*/
- weight = tg->cfs_rq[i]->load.weight;
if (!weight)
weight = NICE_0_LOAD;
- tg->cfs_rq[i]->rq_weight = weight;
rq_weight += weight;
shares += tg->cfs_rq[i]->shares;
}
@@ -1586,7 +1616,9 @@
shares = tg->shares;
for_each_cpu(i, sched_domain_span(sd))
- update_group_shares_cpu(tg, i, shares, rq_weight);
+ update_group_shares_cpu(tg, i, shares, rq_weight, usd);
+
+ local_irq_restore(flags);
return 0;
}
@@ -1616,8 +1648,14 @@
static void update_shares(struct sched_domain *sd)
{
- u64 now = cpu_clock(raw_smp_processor_id());
- s64 elapsed = now - sd->last_update;
+ s64 elapsed;
+ u64 now;
+
+ if (root_task_group_empty())
+ return;
+
+ now = cpu_clock(raw_smp_processor_id());
+ elapsed = now - sd->last_update;
if (elapsed >= (s64)(u64)sysctl_sched_shares_ratelimit) {
sd->last_update = now;
@@ -1627,6 +1665,9 @@
static void update_shares_locked(struct rq *rq, struct sched_domain *sd)
{
+ if (root_task_group_empty())
+ return;
+
spin_unlock(&rq->lock);
update_shares(sd);
spin_lock(&rq->lock);
@@ -1634,6 +1675,9 @@
static void update_h_load(long cpu)
{
+ if (root_task_group_empty())
+ return;
+
walk_tg_tree(tg_load_down, tg_nop, (void *)cpu);
}
@@ -2268,8 +2312,7 @@
}
/* Adjust by relative CPU power of the group */
- avg_load = sg_div_cpu_power(group,
- avg_load * SCHED_LOAD_SCALE);
+ avg_load = (avg_load * SCHED_LOAD_SCALE) / group->cpu_power;
if (local_group) {
this_load = avg_load;
@@ -2637,9 +2680,32 @@
set_task_cpu(p, cpu);
/*
- * Make sure we do not leak PI boosting priority to the child:
+ * Make sure we do not leak PI boosting priority to the child.
*/
p->prio = current->normal_prio;
+
+ /*
+ * Revert to default priority/policy on fork if requested.
+ */
+ if (unlikely(p->sched_reset_on_fork)) {
+ if (p->policy == SCHED_FIFO || p->policy == SCHED_RR)
+ p->policy = SCHED_NORMAL;
+
+ if (p->normal_prio < DEFAULT_PRIO)
+ p->prio = DEFAULT_PRIO;
+
+ if (PRIO_TO_NICE(p->static_prio) < 0) {
+ p->static_prio = NICE_TO_PRIO(0);
+ set_load_weight(p);
+ }
+
+ /*
+ * We don't need the reset flag anymore after the fork. It has
+ * fulfilled its duty:
+ */
+ p->sched_reset_on_fork = 0;
+ }
+
if (!rt_prio(p->prio))
p->sched_class = &fair_sched_class;
@@ -2796,12 +2862,6 @@
{
struct mm_struct *mm = rq->prev_mm;
long prev_state;
-#ifdef CONFIG_SMP
- int post_schedule = 0;
-
- if (current->sched_class->needs_post_schedule)
- post_schedule = current->sched_class->needs_post_schedule(rq);
-#endif
rq->prev_mm = NULL;
@@ -2820,10 +2880,6 @@
finish_arch_switch(prev);
perf_counter_task_sched_in(current, cpu_of(rq));
finish_lock_switch(rq, prev);
-#ifdef CONFIG_SMP
- if (post_schedule)
- current->sched_class->post_schedule(rq);
-#endif
fire_sched_in_preempt_notifiers(current);
if (mm)
@@ -2838,6 +2894,42 @@
}
}
+#ifdef CONFIG_SMP
+
+/* assumes rq->lock is held */
+static inline void pre_schedule(struct rq *rq, struct task_struct *prev)
+{
+ if (prev->sched_class->pre_schedule)
+ prev->sched_class->pre_schedule(rq, prev);
+}
+
+/* rq->lock is NOT held, but preemption is disabled */
+static inline void post_schedule(struct rq *rq)
+{
+ if (rq->post_schedule) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&rq->lock, flags);
+ if (rq->curr->sched_class->post_schedule)
+ rq->curr->sched_class->post_schedule(rq);
+ spin_unlock_irqrestore(&rq->lock, flags);
+
+ rq->post_schedule = 0;
+ }
+}
+
+#else
+
+static inline void pre_schedule(struct rq *rq, struct task_struct *p)
+{
+}
+
+static inline void post_schedule(struct rq *rq)
+{
+}
+
+#endif
+
/**
* schedule_tail - first thing a freshly forked thread must call.
* @prev: the thread we just switched away from.
@@ -2848,6 +2940,13 @@
struct rq *rq = this_rq();
finish_task_switch(rq, prev);
+
+ /*
+ * FIXME: do we need to worry about rq being invalidated by the
+ * task_switch?
+ */
+ post_schedule(rq);
+
#ifdef __ARCH_WANT_UNLOCKED_CTXSW
/* In this case, finish_task_switch does not reenable preemption */
preempt_enable();
@@ -3379,9 +3478,10 @@
{
const struct sched_class *class;
- for (class = sched_class_highest; class; class = class->next)
+ for_each_class(class) {
if (class->move_one_task(this_rq, this_cpu, busiest, sd, idle))
return 1;
+ }
return 0;
}
@@ -3544,7 +3644,7 @@
* capacity but still has some space to pick up some load
* from other group and save more power
*/
- if (sgs->sum_nr_running > sgs->group_capacity - 1)
+ if (sgs->sum_nr_running + 1 > sgs->group_capacity)
return;
if (sgs->sum_nr_running > sds->leader_nr_running ||
@@ -3611,6 +3711,77 @@
}
#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
+unsigned long __weak arch_scale_smt_power(struct sched_domain *sd, int cpu)
+{
+ unsigned long weight = cpumask_weight(sched_domain_span(sd));
+ unsigned long smt_gain = sd->smt_gain;
+
+ smt_gain /= weight;
+
+ return smt_gain;
+}
+
+unsigned long scale_rt_power(int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ u64 total, available;
+
+ sched_avg_update(rq);
+
+ total = sched_avg_period() + (rq->clock - rq->age_stamp);
+ available = total - rq->rt_avg;
+
+ if (unlikely((s64)total < SCHED_LOAD_SCALE))
+ total = SCHED_LOAD_SCALE;
+
+ total >>= SCHED_LOAD_SHIFT;
+
+ return div_u64(available, total);
+}
+
+static void update_cpu_power(struct sched_domain *sd, int cpu)
+{
+ unsigned long weight = cpumask_weight(sched_domain_span(sd));
+ unsigned long power = SCHED_LOAD_SCALE;
+ struct sched_group *sdg = sd->groups;
+
+ /* here we could scale based on cpufreq */
+
+ if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
+ power *= arch_scale_smt_power(sd, cpu);
+ power >>= SCHED_LOAD_SHIFT;
+ }
+
+ power *= scale_rt_power(cpu);
+ power >>= SCHED_LOAD_SHIFT;
+
+ if (!power)
+ power = 1;
+
+ sdg->cpu_power = power;
+}
+
+static void update_group_power(struct sched_domain *sd, int cpu)
+{
+ struct sched_domain *child = sd->child;
+ struct sched_group *group, *sdg = sd->groups;
+ unsigned long power;
+
+ if (!child) {
+ update_cpu_power(sd, cpu);
+ return;
+ }
+
+ power = 0;
+
+ group = child->groups;
+ do {
+ power += group->cpu_power;
+ group = group->next;
+ } while (group != child->groups);
+
+ sdg->cpu_power = power;
+}
/**
* update_sg_lb_stats - Update sched_group's statistics for load balancing.
@@ -3624,7 +3795,8 @@
* @balance: Should we balance.
* @sgs: variable to hold the statistics for this group.
*/
-static inline void update_sg_lb_stats(struct sched_group *group, int this_cpu,
+static inline void update_sg_lb_stats(struct sched_domain *sd,
+ struct sched_group *group, int this_cpu,
enum cpu_idle_type idle, int load_idx, int *sd_idle,
int local_group, const struct cpumask *cpus,
int *balance, struct sg_lb_stats *sgs)
@@ -3635,8 +3807,11 @@
unsigned long sum_avg_load_per_task;
unsigned long avg_load_per_task;
- if (local_group)
+ if (local_group) {
balance_cpu = group_first_cpu(group);
+ if (balance_cpu == this_cpu)
+ update_group_power(sd, this_cpu);
+ }
/* Tally up the load of all CPUs in the group */
sum_avg_load_per_task = avg_load_per_task = 0;
@@ -3685,8 +3860,7 @@
}
/* Adjust by relative CPU power of the group */
- sgs->avg_load = sg_div_cpu_power(group,
- sgs->group_load * SCHED_LOAD_SCALE);
+ sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power;
/*
@@ -3698,14 +3872,14 @@
* normalized nr_running number somewhere that negates
* the hierarchy?
*/
- avg_load_per_task = sg_div_cpu_power(group,
- sum_avg_load_per_task * SCHED_LOAD_SCALE);
+ avg_load_per_task = (sum_avg_load_per_task * SCHED_LOAD_SCALE) /
+ group->cpu_power;
if ((max_cpu_load - min_cpu_load) > 2*avg_load_per_task)
sgs->group_imb = 1;
- sgs->group_capacity = group->__cpu_power / SCHED_LOAD_SCALE;
-
+ sgs->group_capacity =
+ DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
}
/**
@@ -3723,9 +3897,13 @@
const struct cpumask *cpus, int *balance,
struct sd_lb_stats *sds)
{
+ struct sched_domain *child = sd->child;
struct sched_group *group = sd->groups;
struct sg_lb_stats sgs;
- int load_idx;
+ int load_idx, prefer_sibling = 0;
+
+ if (child && child->flags & SD_PREFER_SIBLING)
+ prefer_sibling = 1;
init_sd_power_savings_stats(sd, sds, idle);
load_idx = get_sd_load_idx(sd, idle);
@@ -3736,14 +3914,22 @@
local_group = cpumask_test_cpu(this_cpu,
sched_group_cpus(group));
memset(&sgs, 0, sizeof(sgs));
- update_sg_lb_stats(group, this_cpu, idle, load_idx, sd_idle,
+ update_sg_lb_stats(sd, group, this_cpu, idle, load_idx, sd_idle,
local_group, cpus, balance, &sgs);
if (local_group && balance && !(*balance))
return;
sds->total_load += sgs.group_load;
- sds->total_pwr += group->__cpu_power;
+ sds->total_pwr += group->cpu_power;
+
+ /*
+ * In case the child domain prefers tasks go to siblings
+ * first, lower the group capacity to one so that we'll try
+ * and move all the excess tasks away.
+ */
+ if (prefer_sibling)
+ sgs.group_capacity = min(sgs.group_capacity, 1UL);
if (local_group) {
sds->this_load = sgs.avg_load;
@@ -3763,7 +3949,6 @@
update_sd_power_savings_stats(group, sds, local_group, &sgs);
group = group->next;
} while (group != sd->groups);
-
}
/**
@@ -3801,28 +3986,28 @@
* moving them.
*/
- pwr_now += sds->busiest->__cpu_power *
+ pwr_now += sds->busiest->cpu_power *
min(sds->busiest_load_per_task, sds->max_load);
- pwr_now += sds->this->__cpu_power *
+ pwr_now += sds->this->cpu_power *
min(sds->this_load_per_task, sds->this_load);
pwr_now /= SCHED_LOAD_SCALE;
/* Amount of load we'd subtract */
- tmp = sg_div_cpu_power(sds->busiest,
- sds->busiest_load_per_task * SCHED_LOAD_SCALE);
+ tmp = (sds->busiest_load_per_task * SCHED_LOAD_SCALE) /
+ sds->busiest->cpu_power;
if (sds->max_load > tmp)
- pwr_move += sds->busiest->__cpu_power *
+ pwr_move += sds->busiest->cpu_power *
min(sds->busiest_load_per_task, sds->max_load - tmp);
/* Amount of load we'd add */
- if (sds->max_load * sds->busiest->__cpu_power <
+ if (sds->max_load * sds->busiest->cpu_power <
sds->busiest_load_per_task * SCHED_LOAD_SCALE)
- tmp = sg_div_cpu_power(sds->this,
- sds->max_load * sds->busiest->__cpu_power);
+ tmp = (sds->max_load * sds->busiest->cpu_power) /
+ sds->this->cpu_power;
else
- tmp = sg_div_cpu_power(sds->this,
- sds->busiest_load_per_task * SCHED_LOAD_SCALE);
- pwr_move += sds->this->__cpu_power *
+ tmp = (sds->busiest_load_per_task * SCHED_LOAD_SCALE) /
+ sds->this->cpu_power;
+ pwr_move += sds->this->cpu_power *
min(sds->this_load_per_task, sds->this_load + tmp);
pwr_move /= SCHED_LOAD_SCALE;
@@ -3857,8 +4042,8 @@
sds->max_load - sds->busiest_load_per_task);
/* How much load to actually move to equalise the imbalance */
- *imbalance = min(max_pull * sds->busiest->__cpu_power,
- (sds->avg_load - sds->this_load) * sds->this->__cpu_power)
+ *imbalance = min(max_pull * sds->busiest->cpu_power,
+ (sds->avg_load - sds->this_load) * sds->this->cpu_power)
/ SCHED_LOAD_SCALE;
/*
@@ -3976,6 +4161,26 @@
return NULL;
}
+static struct sched_group *group_of(int cpu)
+{
+ struct sched_domain *sd = rcu_dereference(cpu_rq(cpu)->sd);
+
+ if (!sd)
+ return NULL;
+
+ return sd->groups;
+}
+
+static unsigned long power_of(int cpu)
+{
+ struct sched_group *group = group_of(cpu);
+
+ if (!group)
+ return SCHED_LOAD_SCALE;
+
+ return group->cpu_power;
+}
+
/*
* find_busiest_queue - find the busiest runqueue among the cpus in group.
*/
@@ -3988,15 +4193,18 @@
int i;
for_each_cpu(i, sched_group_cpus(group)) {
+ unsigned long power = power_of(i);
+ unsigned long capacity = DIV_ROUND_CLOSEST(power, SCHED_LOAD_SCALE);
unsigned long wl;
if (!cpumask_test_cpu(i, cpus))
continue;
rq = cpu_rq(i);
- wl = weighted_cpuload(i);
+ wl = weighted_cpuload(i) * SCHED_LOAD_SCALE;
+ wl /= power;
- if (rq->nr_running == 1 && wl > imbalance)
+ if (capacity && rq->nr_running == 1 && wl > imbalance)
continue;
if (wl > max_load) {
@@ -5325,7 +5533,7 @@
preempt_disable();
cpu = smp_processor_id();
rq = cpu_rq(cpu);
- rcu_qsctr_inc(cpu);
+ rcu_sched_qs(cpu);
prev = rq->curr;
switch_count = &prev->nivcsw;
@@ -5349,10 +5557,7 @@
switch_count = &prev->nvcsw;
}
-#ifdef CONFIG_SMP
- if (prev->sched_class->pre_schedule)
- prev->sched_class->pre_schedule(rq, prev);
-#endif
+ pre_schedule(rq, prev);
if (unlikely(!rq->nr_running))
idle_balance(cpu, rq);
@@ -5378,6 +5583,8 @@
} else
spin_unlock_irq(&rq->lock);
+ post_schedule(rq);
+
if (unlikely(reacquire_kernel_lock(current) < 0))
goto need_resched_nonpreemptible;
@@ -6123,17 +6330,25 @@
unsigned long flags;
const struct sched_class *prev_class = p->sched_class;
struct rq *rq;
+ int reset_on_fork;
/* may grab non-irq protected spin_locks */
BUG_ON(in_interrupt());
recheck:
/* double check policy once rq lock held */
- if (policy < 0)
+ if (policy < 0) {
+ reset_on_fork = p->sched_reset_on_fork;
policy = oldpolicy = p->policy;
- else if (policy != SCHED_FIFO && policy != SCHED_RR &&
- policy != SCHED_NORMAL && policy != SCHED_BATCH &&
- policy != SCHED_IDLE)
- return -EINVAL;
+ } else {
+ reset_on_fork = !!(policy & SCHED_RESET_ON_FORK);
+ policy &= ~SCHED_RESET_ON_FORK;
+
+ if (policy != SCHED_FIFO && policy != SCHED_RR &&
+ policy != SCHED_NORMAL && policy != SCHED_BATCH &&
+ policy != SCHED_IDLE)
+ return -EINVAL;
+ }
+
/*
* Valid priorities for SCHED_FIFO and SCHED_RR are
* 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL,
@@ -6177,6 +6392,10 @@
/* can't change other user's priorities */
if (!check_same_owner(p))
return -EPERM;
+
+ /* Normal users shall not reset the sched_reset_on_fork flag */
+ if (p->sched_reset_on_fork && !reset_on_fork)
+ return -EPERM;
}
if (user) {
@@ -6220,6 +6439,8 @@
if (running)
p->sched_class->put_prev_task(rq, p);
+ p->sched_reset_on_fork = reset_on_fork;
+
oldprio = p->prio;
__setscheduler(rq, p, policy, param->sched_priority);
@@ -6336,14 +6557,15 @@
if (p) {
retval = security_task_getscheduler(p);
if (!retval)
- retval = p->policy;
+ retval = p->policy
+ | (p->sched_reset_on_fork ? SCHED_RESET_ON_FORK : 0);
}
read_unlock(&tasklist_lock);
return retval;
}
/**
- * sys_sched_getscheduler - get the RT priority of a thread
+ * sys_sched_getparam - get the RT priority of a thread
* @pid: the pid in question.
* @param: structure containing the RT priority.
*/
@@ -6571,19 +6793,9 @@
static void __cond_resched(void)
{
-#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
- __might_sleep(__FILE__, __LINE__);
-#endif
- /*
- * The BKS might be reacquired before we have dropped
- * PREEMPT_ACTIVE, which could trigger a second
- * cond_resched() call.
- */
- do {
- add_preempt_count(PREEMPT_ACTIVE);
- schedule();
- sub_preempt_count(PREEMPT_ACTIVE);
- } while (need_resched());
+ add_preempt_count(PREEMPT_ACTIVE);
+ schedule();
+ sub_preempt_count(PREEMPT_ACTIVE);
}
int __sched _cond_resched(void)
@@ -6597,18 +6809,20 @@
EXPORT_SYMBOL(_cond_resched);
/*
- * cond_resched_lock() - if a reschedule is pending, drop the given lock,
+ * __cond_resched_lock() - if a reschedule is pending, drop the given lock,
* call schedule, and on return reacquire the lock.
*
* This works OK both with and without CONFIG_PREEMPT. We do strange low-level
* operations here to prevent schedule() from being called twice (once via
* spin_unlock(), once by hand).
*/
-int cond_resched_lock(spinlock_t *lock)
+int __cond_resched_lock(spinlock_t *lock)
{
int resched = should_resched();
int ret = 0;
+ lockdep_assert_held(lock);
+
if (spin_needbreak(lock) || resched) {
spin_unlock(lock);
if (resched)
@@ -6620,9 +6834,9 @@
}
return ret;
}
-EXPORT_SYMBOL(cond_resched_lock);
+EXPORT_SYMBOL(__cond_resched_lock);
-int __sched cond_resched_softirq(void)
+int __sched __cond_resched_softirq(void)
{
BUG_ON(!in_softirq());
@@ -6634,7 +6848,7 @@
}
return 0;
}
-EXPORT_SYMBOL(cond_resched_softirq);
+EXPORT_SYMBOL(__cond_resched_softirq);
/**
* yield - yield the current processor to other threads.
@@ -6658,11 +6872,13 @@
*/
void __sched io_schedule(void)
{
- struct rq *rq = &__raw_get_cpu_var(runqueues);
+ struct rq *rq = raw_rq();
delayacct_blkio_start();
atomic_inc(&rq->nr_iowait);
+ current->in_iowait = 1;
schedule();
+ current->in_iowait = 0;
atomic_dec(&rq->nr_iowait);
delayacct_blkio_end();
}
@@ -6670,12 +6886,14 @@
long __sched io_schedule_timeout(long timeout)
{
- struct rq *rq = &__raw_get_cpu_var(runqueues);
+ struct rq *rq = raw_rq();
long ret;
delayacct_blkio_start();
atomic_inc(&rq->nr_iowait);
+ current->in_iowait = 1;
ret = schedule_timeout(timeout);
+ current->in_iowait = 0;
atomic_dec(&rq->nr_iowait);
delayacct_blkio_end();
return ret;
@@ -6992,8 +7210,12 @@
if (migrate_task(p, cpumask_any_and(cpu_online_mask, new_mask), &req)) {
/* Need help from migration thread: drop lock and wait. */
+ struct task_struct *mt = rq->migration_thread;
+
+ get_task_struct(mt);
task_rq_unlock(rq, &flags);
wake_up_process(rq->migration_thread);
+ put_task_struct(mt);
wait_for_completion(&req.done);
tlb_migrate_finish(p->mm);
return 0;
@@ -7051,6 +7273,11 @@
return ret;
}
+#define RCU_MIGRATION_IDLE 0
+#define RCU_MIGRATION_NEED_QS 1
+#define RCU_MIGRATION_GOT_QS 2
+#define RCU_MIGRATION_MUST_SYNC 3
+
/*
* migration_thread - this is a highprio system thread that performs
* thread migration by bumping thread off CPU then 'pushing' onto
@@ -7058,6 +7285,7 @@
*/
static int migration_thread(void *data)
{
+ int badcpu;
int cpu = (long)data;
struct rq *rq;
@@ -7092,8 +7320,17 @@
req = list_entry(head->next, struct migration_req, list);
list_del_init(head->next);
- spin_unlock(&rq->lock);
- __migrate_task(req->task, cpu, req->dest_cpu);
+ if (req->task != NULL) {
+ spin_unlock(&rq->lock);
+ __migrate_task(req->task, cpu, req->dest_cpu);
+ } else if (likely(cpu == (badcpu = smp_processor_id()))) {
+ req->dest_cpu = RCU_MIGRATION_GOT_QS;
+ spin_unlock(&rq->lock);
+ } else {
+ req->dest_cpu = RCU_MIGRATION_MUST_SYNC;
+ spin_unlock(&rq->lock);
+ WARN_ONCE(1, "migration_thread() on CPU %d, expected %d\n", badcpu, cpu);
+ }
local_irq_enable();
complete(&req->done);
@@ -7625,7 +7862,7 @@
migration_call(&migration_notifier, CPU_ONLINE, cpu);
register_cpu_notifier(&migration_notifier);
- return err;
+ return 0;
}
early_initcall(migration_init);
#endif
@@ -7672,7 +7909,7 @@
break;
}
- if (!group->__cpu_power) {
+ if (!group->cpu_power) {
printk(KERN_CONT "\n");
printk(KERN_ERR "ERROR: domain->cpu_power not "
"set\n");
@@ -7696,9 +7933,9 @@
cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
printk(KERN_CONT " %s", str);
- if (group->__cpu_power != SCHED_LOAD_SCALE) {
- printk(KERN_CONT " (__cpu_power = %d)",
- group->__cpu_power);
+ if (group->cpu_power != SCHED_LOAD_SCALE) {
+ printk(KERN_CONT " (cpu_power = %d)",
+ group->cpu_power);
}
group = group->next;
@@ -7841,7 +8078,7 @@
rq->rd = rd;
cpumask_set_cpu(rq->cpu, rd->span);
- if (cpumask_test_cpu(rq->cpu, cpu_online_mask))
+ if (cpumask_test_cpu(rq->cpu, cpu_active_mask))
set_rq_online(rq);
spin_unlock_irqrestore(&rq->lock, flags);
@@ -7983,7 +8220,7 @@
continue;
cpumask_clear(sched_group_cpus(sg));
- sg->__cpu_power = 0;
+ sg->cpu_power = 0;
for_each_cpu(j, span) {
if (group_fn(j, cpu_map, NULL, tmpmask) != group)
@@ -8091,6 +8328,39 @@
DECLARE_BITMAP(span, CONFIG_NR_CPUS);
};
+struct s_data {
+#ifdef CONFIG_NUMA
+ int sd_allnodes;
+ cpumask_var_t domainspan;
+ cpumask_var_t covered;
+ cpumask_var_t notcovered;
+#endif
+ cpumask_var_t nodemask;
+ cpumask_var_t this_sibling_map;
+ cpumask_var_t this_core_map;
+ cpumask_var_t send_covered;
+ cpumask_var_t tmpmask;
+ struct sched_group **sched_group_nodes;
+ struct root_domain *rd;
+};
+
+enum s_alloc {
+ sa_sched_groups = 0,
+ sa_rootdomain,
+ sa_tmpmask,
+ sa_send_covered,
+ sa_this_core_map,
+ sa_this_sibling_map,
+ sa_nodemask,
+ sa_sched_group_nodes,
+#ifdef CONFIG_NUMA
+ sa_notcovered,
+ sa_covered,
+ sa_domainspan,
+#endif
+ sa_none,
+};
+
/*
* SMT sched-domains:
*/
@@ -8208,11 +8478,76 @@
continue;
}
- sg_inc_cpu_power(sg, sd->groups->__cpu_power);
+ sg->cpu_power += sd->groups->cpu_power;
}
sg = sg->next;
} while (sg != group_head);
}
+
+static int build_numa_sched_groups(struct s_data *d,
+ const struct cpumask *cpu_map, int num)
+{
+ struct sched_domain *sd;
+ struct sched_group *sg, *prev;
+ int n, j;
+
+ cpumask_clear(d->covered);
+ cpumask_and(d->nodemask, cpumask_of_node(num), cpu_map);
+ if (cpumask_empty(d->nodemask)) {
+ d->sched_group_nodes[num] = NULL;
+ goto out;
+ }
+
+ sched_domain_node_span(num, d->domainspan);
+ cpumask_and(d->domainspan, d->domainspan, cpu_map);
+
+ sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
+ GFP_KERNEL, num);
+ if (!sg) {
+ printk(KERN_WARNING "Can not alloc domain group for node %d\n",
+ num);
+ return -ENOMEM;
+ }
+ d->sched_group_nodes[num] = sg;
+
+ for_each_cpu(j, d->nodemask) {
+ sd = &per_cpu(node_domains, j).sd;
+ sd->groups = sg;
+ }
+
+ sg->cpu_power = 0;
+ cpumask_copy(sched_group_cpus(sg), d->nodemask);
+ sg->next = sg;
+ cpumask_or(d->covered, d->covered, d->nodemask);
+
+ prev = sg;
+ for (j = 0; j < nr_node_ids; j++) {
+ n = (num + j) % nr_node_ids;
+ cpumask_complement(d->notcovered, d->covered);
+ cpumask_and(d->tmpmask, d->notcovered, cpu_map);
+ cpumask_and(d->tmpmask, d->tmpmask, d->domainspan);
+ if (cpumask_empty(d->tmpmask))
+ break;
+ cpumask_and(d->tmpmask, d->tmpmask, cpumask_of_node(n));
+ if (cpumask_empty(d->tmpmask))
+ continue;
+ sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
+ GFP_KERNEL, num);
+ if (!sg) {
+ printk(KERN_WARNING
+ "Can not alloc domain group for node %d\n", j);
+ return -ENOMEM;
+ }
+ sg->cpu_power = 0;
+ cpumask_copy(sched_group_cpus(sg), d->tmpmask);
+ sg->next = prev->next;
+ cpumask_or(d->covered, d->covered, d->tmpmask);
+ prev->next = sg;
+ prev = sg;
+ }
+out:
+ return 0;
+}
#endif /* CONFIG_NUMA */
#ifdef CONFIG_NUMA
@@ -8266,15 +8601,13 @@
* there are asymmetries in the topology. If there are asymmetries, group
* having more cpu_power will pickup more load compared to the group having
* less cpu_power.
- *
- * cpu_power will be a multiple of SCHED_LOAD_SCALE. This multiple represents
- * the maximum number of tasks a group can handle in the presence of other idle
- * or lightly loaded groups in the same sched domain.
*/
static void init_sched_groups_power(int cpu, struct sched_domain *sd)
{
struct sched_domain *child;
struct sched_group *group;
+ long power;
+ int weight;
WARN_ON(!sd || !sd->groups);
@@ -8283,28 +8616,32 @@
child = sd->child;
- sd->groups->__cpu_power = 0;
+ sd->groups->cpu_power = 0;
- /*
- * For perf policy, if the groups in child domain share resources
- * (for example cores sharing some portions of the cache hierarchy
- * or SMT), then set this domain groups cpu_power such that each group
- * can handle only one task, when there are other idle groups in the
- * same sched domain.
- */
- if (!child || (!(sd->flags & SD_POWERSAVINGS_BALANCE) &&
- (child->flags &
- (SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES)))) {
- sg_inc_cpu_power(sd->groups, SCHED_LOAD_SCALE);
+ if (!child) {
+ power = SCHED_LOAD_SCALE;
+ weight = cpumask_weight(sched_domain_span(sd));
+ /*
+ * SMT siblings share the power of a single core.
+ * Usually multiple threads get a better yield out of
+ * that one core than a single thread would have,
+ * reflect that in sd->smt_gain.
+ */
+ if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
+ power *= sd->smt_gain;
+ power /= weight;
+ power >>= SCHED_LOAD_SHIFT;
+ }
+ sd->groups->cpu_power += power;
return;
}
/*
- * add cpu_power of each child group to this groups cpu_power
+ * Add cpu_power of each child group to this groups cpu_power.
*/
group = child->groups;
do {
- sg_inc_cpu_power(sd->groups, group->__cpu_power);
+ sd->groups->cpu_power += group->cpu_power;
group = group->next;
} while (group != child->groups);
}
@@ -8378,6 +8715,199 @@
}
}
+static void __free_domain_allocs(struct s_data *d, enum s_alloc what,
+ const struct cpumask *cpu_map)
+{
+ switch (what) {
+ case sa_sched_groups:
+ free_sched_groups(cpu_map, d->tmpmask); /* fall through */
+ d->sched_group_nodes = NULL;
+ case sa_rootdomain:
+ free_rootdomain(d->rd); /* fall through */
+ case sa_tmpmask:
+ free_cpumask_var(d->tmpmask); /* fall through */
+ case sa_send_covered:
+ free_cpumask_var(d->send_covered); /* fall through */
+ case sa_this_core_map:
+ free_cpumask_var(d->this_core_map); /* fall through */
+ case sa_this_sibling_map:
+ free_cpumask_var(d->this_sibling_map); /* fall through */
+ case sa_nodemask:
+ free_cpumask_var(d->nodemask); /* fall through */
+ case sa_sched_group_nodes:
+#ifdef CONFIG_NUMA
+ kfree(d->sched_group_nodes); /* fall through */
+ case sa_notcovered:
+ free_cpumask_var(d->notcovered); /* fall through */
+ case sa_covered:
+ free_cpumask_var(d->covered); /* fall through */
+ case sa_domainspan:
+ free_cpumask_var(d->domainspan); /* fall through */
+#endif
+ case sa_none:
+ break;
+ }
+}
+
+static enum s_alloc __visit_domain_allocation_hell(struct s_data *d,
+ const struct cpumask *cpu_map)
+{
+#ifdef CONFIG_NUMA
+ if (!alloc_cpumask_var(&d->domainspan, GFP_KERNEL))
+ return sa_none;
+ if (!alloc_cpumask_var(&d->covered, GFP_KERNEL))
+ return sa_domainspan;
+ if (!alloc_cpumask_var(&d->notcovered, GFP_KERNEL))
+ return sa_covered;
+ /* Allocate the per-node list of sched groups */
+ d->sched_group_nodes = kcalloc(nr_node_ids,
+ sizeof(struct sched_group *), GFP_KERNEL);
+ if (!d->sched_group_nodes) {
+ printk(KERN_WARNING "Can not alloc sched group node list\n");
+ return sa_notcovered;
+ }
+ sched_group_nodes_bycpu[cpumask_first(cpu_map)] = d->sched_group_nodes;
+#endif
+ if (!alloc_cpumask_var(&d->nodemask, GFP_KERNEL))
+ return sa_sched_group_nodes;
+ if (!alloc_cpumask_var(&d->this_sibling_map, GFP_KERNEL))
+ return sa_nodemask;
+ if (!alloc_cpumask_var(&d->this_core_map, GFP_KERNEL))
+ return sa_this_sibling_map;
+ if (!alloc_cpumask_var(&d->send_covered, GFP_KERNEL))
+ return sa_this_core_map;
+ if (!alloc_cpumask_var(&d->tmpmask, GFP_KERNEL))
+ return sa_send_covered;
+ d->rd = alloc_rootdomain();
+ if (!d->rd) {
+ printk(KERN_WARNING "Cannot alloc root domain\n");
+ return sa_tmpmask;
+ }
+ return sa_rootdomain;
+}
+
+static struct sched_domain *__build_numa_sched_domains(struct s_data *d,
+ const struct cpumask *cpu_map, struct sched_domain_attr *attr, int i)
+{
+ struct sched_domain *sd = NULL;
+#ifdef CONFIG_NUMA
+ struct sched_domain *parent;
+
+ d->sd_allnodes = 0;
+ if (cpumask_weight(cpu_map) >
+ SD_NODES_PER_DOMAIN * cpumask_weight(d->nodemask)) {
+ sd = &per_cpu(allnodes_domains, i).sd;
+ SD_INIT(sd, ALLNODES);
+ set_domain_attribute(sd, attr);
+ cpumask_copy(sched_domain_span(sd), cpu_map);
+ cpu_to_allnodes_group(i, cpu_map, &sd->groups, d->tmpmask);
+ d->sd_allnodes = 1;
+ }
+ parent = sd;
+
+ sd = &per_cpu(node_domains, i).sd;
+ SD_INIT(sd, NODE);
+ set_domain_attribute(sd, attr);
+ sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
+ sd->parent = parent;
+ if (parent)
+ parent->child = sd;
+ cpumask_and(sched_domain_span(sd), sched_domain_span(sd), cpu_map);
+#endif
+ return sd;
+}
+
+static struct sched_domain *__build_cpu_sched_domain(struct s_data *d,
+ const struct cpumask *cpu_map, struct sched_domain_attr *attr,
+ struct sched_domain *parent, int i)
+{
+ struct sched_domain *sd;
+ sd = &per_cpu(phys_domains, i).sd;
+ SD_INIT(sd, CPU);
+ set_domain_attribute(sd, attr);
+ cpumask_copy(sched_domain_span(sd), d->nodemask);
+ sd->parent = parent;
+ if (parent)
+ parent->child = sd;
+ cpu_to_phys_group(i, cpu_map, &sd->groups, d->tmpmask);
+ return sd;
+}
+
+static struct sched_domain *__build_mc_sched_domain(struct s_data *d,
+ const struct cpumask *cpu_map, struct sched_domain_attr *attr,
+ struct sched_domain *parent, int i)
+{
+ struct sched_domain *sd = parent;
+#ifdef CONFIG_SCHED_MC
+ sd = &per_cpu(core_domains, i).sd;
+ SD_INIT(sd, MC);
+ set_domain_attribute(sd, attr);
+ cpumask_and(sched_domain_span(sd), cpu_map, cpu_coregroup_mask(i));
+ sd->parent = parent;
+ parent->child = sd;
+ cpu_to_core_group(i, cpu_map, &sd->groups, d->tmpmask);
+#endif
+ return sd;
+}
+
+static struct sched_domain *__build_smt_sched_domain(struct s_data *d,
+ const struct cpumask *cpu_map, struct sched_domain_attr *attr,
+ struct sched_domain *parent, int i)
+{
+ struct sched_domain *sd = parent;
+#ifdef CONFIG_SCHED_SMT
+ sd = &per_cpu(cpu_domains, i).sd;
+ SD_INIT(sd, SIBLING);
+ set_domain_attribute(sd, attr);
+ cpumask_and(sched_domain_span(sd), cpu_map, topology_thread_cpumask(i));
+ sd->parent = parent;
+ parent->child = sd;
+ cpu_to_cpu_group(i, cpu_map, &sd->groups, d->tmpmask);
+#endif
+ return sd;
+}
+
+static void build_sched_groups(struct s_data *d, enum sched_domain_level l,
+ const struct cpumask *cpu_map, int cpu)
+{
+ switch (l) {
+#ifdef CONFIG_SCHED_SMT
+ case SD_LV_SIBLING: /* set up CPU (sibling) groups */
+ cpumask_and(d->this_sibling_map, cpu_map,
+ topology_thread_cpumask(cpu));
+ if (cpu == cpumask_first(d->this_sibling_map))
+ init_sched_build_groups(d->this_sibling_map, cpu_map,
+ &cpu_to_cpu_group,
+ d->send_covered, d->tmpmask);
+ break;
+#endif
+#ifdef CONFIG_SCHED_MC
+ case SD_LV_MC: /* set up multi-core groups */
+ cpumask_and(d->this_core_map, cpu_map, cpu_coregroup_mask(cpu));
+ if (cpu == cpumask_first(d->this_core_map))
+ init_sched_build_groups(d->this_core_map, cpu_map,
+ &cpu_to_core_group,
+ d->send_covered, d->tmpmask);
+ break;
+#endif
+ case SD_LV_CPU: /* set up physical groups */
+ cpumask_and(d->nodemask, cpumask_of_node(cpu), cpu_map);
+ if (!cpumask_empty(d->nodemask))
+ init_sched_build_groups(d->nodemask, cpu_map,
+ &cpu_to_phys_group,
+ d->send_covered, d->tmpmask);
+ break;
+#ifdef CONFIG_NUMA
+ case SD_LV_ALLNODES:
+ init_sched_build_groups(cpu_map, cpu_map, &cpu_to_allnodes_group,
+ d->send_covered, d->tmpmask);
+ break;
+#endif
+ default:
+ break;
+ }
+}
+
/*
* Build sched domains for a given set of cpus and attach the sched domains
* to the individual cpus
@@ -8385,273 +8915,85 @@
static int __build_sched_domains(const struct cpumask *cpu_map,
struct sched_domain_attr *attr)
{
- int i, err = -ENOMEM;
- struct root_domain *rd;
- cpumask_var_t nodemask, this_sibling_map, this_core_map, send_covered,
- tmpmask;
+ enum s_alloc alloc_state = sa_none;
+ struct s_data d;
+ struct sched_domain *sd;
+ int i;
#ifdef CONFIG_NUMA
- cpumask_var_t domainspan, covered, notcovered;
- struct sched_group **sched_group_nodes = NULL;
- int sd_allnodes = 0;
-
- if (!alloc_cpumask_var(&domainspan, GFP_KERNEL))
- goto out;
- if (!alloc_cpumask_var(&covered, GFP_KERNEL))
- goto free_domainspan;
- if (!alloc_cpumask_var(¬covered, GFP_KERNEL))
- goto free_covered;
+ d.sd_allnodes = 0;
#endif
- if (!alloc_cpumask_var(&nodemask, GFP_KERNEL))
- goto free_notcovered;
- if (!alloc_cpumask_var(&this_sibling_map, GFP_KERNEL))
- goto free_nodemask;
- if (!alloc_cpumask_var(&this_core_map, GFP_KERNEL))
- goto free_this_sibling_map;
- if (!alloc_cpumask_var(&send_covered, GFP_KERNEL))
- goto free_this_core_map;
- if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
- goto free_send_covered;
-
-#ifdef CONFIG_NUMA
- /*
- * Allocate the per-node list of sched groups
- */
- sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *),
- GFP_KERNEL);
- if (!sched_group_nodes) {
- printk(KERN_WARNING "Can not alloc sched group node list\n");
- goto free_tmpmask;
- }
-#endif
-
- rd = alloc_rootdomain();
- if (!rd) {
- printk(KERN_WARNING "Cannot alloc root domain\n");
- goto free_sched_groups;
- }
-
-#ifdef CONFIG_NUMA
- sched_group_nodes_bycpu[cpumask_first(cpu_map)] = sched_group_nodes;
-#endif
+ alloc_state = __visit_domain_allocation_hell(&d, cpu_map);
+ if (alloc_state != sa_rootdomain)
+ goto error;
+ alloc_state = sa_sched_groups;
/*
* Set up domains for cpus specified by the cpu_map.
*/
for_each_cpu(i, cpu_map) {
- struct sched_domain *sd = NULL, *p;
+ cpumask_and(d.nodemask, cpumask_of_node(cpu_to_node(i)),
+ cpu_map);
- cpumask_and(nodemask, cpumask_of_node(cpu_to_node(i)), cpu_map);
-
-#ifdef CONFIG_NUMA
- if (cpumask_weight(cpu_map) >
- SD_NODES_PER_DOMAIN*cpumask_weight(nodemask)) {
- sd = &per_cpu(allnodes_domains, i).sd;
- SD_INIT(sd, ALLNODES);
- set_domain_attribute(sd, attr);
- cpumask_copy(sched_domain_span(sd), cpu_map);
- cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
- p = sd;
- sd_allnodes = 1;
- } else
- p = NULL;
-
- sd = &per_cpu(node_domains, i).sd;
- SD_INIT(sd, NODE);
- set_domain_attribute(sd, attr);
- sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
- sd->parent = p;
- if (p)
- p->child = sd;
- cpumask_and(sched_domain_span(sd),
- sched_domain_span(sd), cpu_map);
-#endif
-
- p = sd;
- sd = &per_cpu(phys_domains, i).sd;
- SD_INIT(sd, CPU);
- set_domain_attribute(sd, attr);
- cpumask_copy(sched_domain_span(sd), nodemask);
- sd->parent = p;
- if (p)
- p->child = sd;
- cpu_to_phys_group(i, cpu_map, &sd->groups, tmpmask);
-
-#ifdef CONFIG_SCHED_MC
- p = sd;
- sd = &per_cpu(core_domains, i).sd;
- SD_INIT(sd, MC);
- set_domain_attribute(sd, attr);
- cpumask_and(sched_domain_span(sd), cpu_map,
- cpu_coregroup_mask(i));
- sd->parent = p;
- p->child = sd;
- cpu_to_core_group(i, cpu_map, &sd->groups, tmpmask);
-#endif
-
-#ifdef CONFIG_SCHED_SMT
- p = sd;
- sd = &per_cpu(cpu_domains, i).sd;
- SD_INIT(sd, SIBLING);
- set_domain_attribute(sd, attr);
- cpumask_and(sched_domain_span(sd),
- topology_thread_cpumask(i), cpu_map);
- sd->parent = p;
- p->child = sd;
- cpu_to_cpu_group(i, cpu_map, &sd->groups, tmpmask);
-#endif
+ sd = __build_numa_sched_domains(&d, cpu_map, attr, i);
+ sd = __build_cpu_sched_domain(&d, cpu_map, attr, sd, i);
+ sd = __build_mc_sched_domain(&d, cpu_map, attr, sd, i);
+ sd = __build_smt_sched_domain(&d, cpu_map, attr, sd, i);
}
-#ifdef CONFIG_SCHED_SMT
- /* Set up CPU (sibling) groups */
for_each_cpu(i, cpu_map) {
- cpumask_and(this_sibling_map,
- topology_thread_cpumask(i), cpu_map);
- if (i != cpumask_first(this_sibling_map))
- continue;
-
- init_sched_build_groups(this_sibling_map, cpu_map,
- &cpu_to_cpu_group,
- send_covered, tmpmask);
+ build_sched_groups(&d, SD_LV_SIBLING, cpu_map, i);
+ build_sched_groups(&d, SD_LV_MC, cpu_map, i);
}
-#endif
-
-#ifdef CONFIG_SCHED_MC
- /* Set up multi-core groups */
- for_each_cpu(i, cpu_map) {
- cpumask_and(this_core_map, cpu_coregroup_mask(i), cpu_map);
- if (i != cpumask_first(this_core_map))
- continue;
-
- init_sched_build_groups(this_core_map, cpu_map,
- &cpu_to_core_group,
- send_covered, tmpmask);
- }
-#endif
/* Set up physical groups */
- for (i = 0; i < nr_node_ids; i++) {
- cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
- if (cpumask_empty(nodemask))
- continue;
-
- init_sched_build_groups(nodemask, cpu_map,
- &cpu_to_phys_group,
- send_covered, tmpmask);
- }
+ for (i = 0; i < nr_node_ids; i++)
+ build_sched_groups(&d, SD_LV_CPU, cpu_map, i);
#ifdef CONFIG_NUMA
/* Set up node groups */
- if (sd_allnodes) {
- init_sched_build_groups(cpu_map, cpu_map,
- &cpu_to_allnodes_group,
- send_covered, tmpmask);
- }
+ if (d.sd_allnodes)
+ build_sched_groups(&d, SD_LV_ALLNODES, cpu_map, 0);
- for (i = 0; i < nr_node_ids; i++) {
- /* Set up node groups */
- struct sched_group *sg, *prev;
- int j;
-
- cpumask_clear(covered);
- cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
- if (cpumask_empty(nodemask)) {
- sched_group_nodes[i] = NULL;
- continue;
- }
-
- sched_domain_node_span(i, domainspan);
- cpumask_and(domainspan, domainspan, cpu_map);
-
- sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
- GFP_KERNEL, i);
- if (!sg) {
- printk(KERN_WARNING "Can not alloc domain group for "
- "node %d\n", i);
+ for (i = 0; i < nr_node_ids; i++)
+ if (build_numa_sched_groups(&d, cpu_map, i))
goto error;
- }
- sched_group_nodes[i] = sg;
- for_each_cpu(j, nodemask) {
- struct sched_domain *sd;
-
- sd = &per_cpu(node_domains, j).sd;
- sd->groups = sg;
- }
- sg->__cpu_power = 0;
- cpumask_copy(sched_group_cpus(sg), nodemask);
- sg->next = sg;
- cpumask_or(covered, covered, nodemask);
- prev = sg;
-
- for (j = 0; j < nr_node_ids; j++) {
- int n = (i + j) % nr_node_ids;
-
- cpumask_complement(notcovered, covered);
- cpumask_and(tmpmask, notcovered, cpu_map);
- cpumask_and(tmpmask, tmpmask, domainspan);
- if (cpumask_empty(tmpmask))
- break;
-
- cpumask_and(tmpmask, tmpmask, cpumask_of_node(n));
- if (cpumask_empty(tmpmask))
- continue;
-
- sg = kmalloc_node(sizeof(struct sched_group) +
- cpumask_size(),
- GFP_KERNEL, i);
- if (!sg) {
- printk(KERN_WARNING
- "Can not alloc domain group for node %d\n", j);
- goto error;
- }
- sg->__cpu_power = 0;
- cpumask_copy(sched_group_cpus(sg), tmpmask);
- sg->next = prev->next;
- cpumask_or(covered, covered, tmpmask);
- prev->next = sg;
- prev = sg;
- }
- }
#endif
/* Calculate CPU power for physical packages and nodes */
#ifdef CONFIG_SCHED_SMT
for_each_cpu(i, cpu_map) {
- struct sched_domain *sd = &per_cpu(cpu_domains, i).sd;
-
+ sd = &per_cpu(cpu_domains, i).sd;
init_sched_groups_power(i, sd);
}
#endif
#ifdef CONFIG_SCHED_MC
for_each_cpu(i, cpu_map) {
- struct sched_domain *sd = &per_cpu(core_domains, i).sd;
-
+ sd = &per_cpu(core_domains, i).sd;
init_sched_groups_power(i, sd);
}
#endif
for_each_cpu(i, cpu_map) {
- struct sched_domain *sd = &per_cpu(phys_domains, i).sd;
-
+ sd = &per_cpu(phys_domains, i).sd;
init_sched_groups_power(i, sd);
}
#ifdef CONFIG_NUMA
for (i = 0; i < nr_node_ids; i++)
- init_numa_sched_groups_power(sched_group_nodes[i]);
+ init_numa_sched_groups_power(d.sched_group_nodes[i]);
- if (sd_allnodes) {
+ if (d.sd_allnodes) {
struct sched_group *sg;
cpu_to_allnodes_group(cpumask_first(cpu_map), cpu_map, &sg,
- tmpmask);
+ d.tmpmask);
init_numa_sched_groups_power(sg);
}
#endif
/* Attach the domains */
for_each_cpu(i, cpu_map) {
- struct sched_domain *sd;
#ifdef CONFIG_SCHED_SMT
sd = &per_cpu(cpu_domains, i).sd;
#elif defined(CONFIG_SCHED_MC)
@@ -8659,44 +9001,16 @@
#else
sd = &per_cpu(phys_domains, i).sd;
#endif
- cpu_attach_domain(sd, rd, i);
+ cpu_attach_domain(sd, d.rd, i);
}
- err = 0;
+ d.sched_group_nodes = NULL; /* don't free this we still need it */
+ __free_domain_allocs(&d, sa_tmpmask, cpu_map);
+ return 0;
-free_tmpmask:
- free_cpumask_var(tmpmask);
-free_send_covered:
- free_cpumask_var(send_covered);
-free_this_core_map:
- free_cpumask_var(this_core_map);
-free_this_sibling_map:
- free_cpumask_var(this_sibling_map);
-free_nodemask:
- free_cpumask_var(nodemask);
-free_notcovered:
-#ifdef CONFIG_NUMA
- free_cpumask_var(notcovered);
-free_covered:
- free_cpumask_var(covered);
-free_domainspan:
- free_cpumask_var(domainspan);
-out:
-#endif
- return err;
-
-free_sched_groups:
-#ifdef CONFIG_NUMA
- kfree(sched_group_nodes);
-#endif
- goto free_tmpmask;
-
-#ifdef CONFIG_NUMA
error:
- free_sched_groups(cpu_map, tmpmask);
- free_rootdomain(rd);
- goto free_tmpmask;
-#endif
+ __free_domain_allocs(&d, alloc_state, cpu_map);
+ return -ENOMEM;
}
static int build_sched_domains(const struct cpumask *cpu_map)
@@ -9304,11 +9618,11 @@
* system cpu resource, based on the weight assigned to root
* user's cpu share (INIT_TASK_GROUP_LOAD). This is accomplished
* by letting tasks of init_task_group sit in a separate cfs_rq
- * (init_cfs_rq) and having one entity represent this group of
+ * (init_tg_cfs_rq) and having one entity represent this group of
* tasks in rq->cfs (i.e init_task_group->se[] != NULL).
*/
init_tg_cfs_entry(&init_task_group,
- &per_cpu(init_cfs_rq, i),
+ &per_cpu(init_tg_cfs_rq, i),
&per_cpu(init_sched_entity, i), i, 1,
root_task_group.se[i]);
@@ -9334,6 +9648,7 @@
#ifdef CONFIG_SMP
rq->sd = NULL;
rq->rd = NULL;
+ rq->post_schedule = 0;
rq->active_balance = 0;
rq->next_balance = jiffies;
rq->push_cpu = 0;
@@ -9398,13 +9713,20 @@
}
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
-void __might_sleep(char *file, int line)
+static inline int preempt_count_equals(int preempt_offset)
+{
+ int nested = preempt_count() & ~PREEMPT_ACTIVE;
+
+ return (nested == PREEMPT_INATOMIC_BASE + preempt_offset);
+}
+
+void __might_sleep(char *file, int line, int preempt_offset)
{
#ifdef in_atomic
static unsigned long prev_jiffy; /* ratelimiting */
- if ((!in_atomic() && !irqs_disabled()) ||
- system_state != SYSTEM_RUNNING || oops_in_progress)
+ if ((preempt_count_equals(preempt_offset) && !irqs_disabled()) ||
+ system_state != SYSTEM_RUNNING || oops_in_progress)
return;
if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
return;
@@ -10581,3 +10903,113 @@
.subsys_id = cpuacct_subsys_id,
};
#endif /* CONFIG_CGROUP_CPUACCT */
+
+#ifndef CONFIG_SMP
+
+int rcu_expedited_torture_stats(char *page)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rcu_expedited_torture_stats);
+
+void synchronize_sched_expedited(void)
+{
+}
+EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
+
+#else /* #ifndef CONFIG_SMP */
+
+static DEFINE_PER_CPU(struct migration_req, rcu_migration_req);
+static DEFINE_MUTEX(rcu_sched_expedited_mutex);
+
+#define RCU_EXPEDITED_STATE_POST -2
+#define RCU_EXPEDITED_STATE_IDLE -1
+
+static int rcu_expedited_state = RCU_EXPEDITED_STATE_IDLE;
+
+int rcu_expedited_torture_stats(char *page)
+{
+ int cnt = 0;
+ int cpu;
+
+ cnt += sprintf(&page[cnt], "state: %d /", rcu_expedited_state);
+ for_each_online_cpu(cpu) {
+ cnt += sprintf(&page[cnt], " %d:%d",
+ cpu, per_cpu(rcu_migration_req, cpu).dest_cpu);
+ }
+ cnt += sprintf(&page[cnt], "\n");
+ return cnt;
+}
+EXPORT_SYMBOL_GPL(rcu_expedited_torture_stats);
+
+static long synchronize_sched_expedited_count;
+
+/*
+ * Wait for an rcu-sched grace period to elapse, but use "big hammer"
+ * approach to force grace period to end quickly. This consumes
+ * significant time on all CPUs, and is thus not recommended for
+ * any sort of common-case code.
+ *
+ * Note that it is illegal to call this function while holding any
+ * lock that is acquired by a CPU-hotplug notifier. Failing to
+ * observe this restriction will result in deadlock.
+ */
+void synchronize_sched_expedited(void)
+{
+ int cpu;
+ unsigned long flags;
+ bool need_full_sync = 0;
+ struct rq *rq;
+ struct migration_req *req;
+ long snap;
+ int trycount = 0;
+
+ smp_mb(); /* ensure prior mod happens before capturing snap. */
+ snap = ACCESS_ONCE(synchronize_sched_expedited_count) + 1;
+ get_online_cpus();
+ while (!mutex_trylock(&rcu_sched_expedited_mutex)) {
+ put_online_cpus();
+ if (trycount++ < 10)
+ udelay(trycount * num_online_cpus());
+ else {
+ synchronize_sched();
+ return;
+ }
+ if (ACCESS_ONCE(synchronize_sched_expedited_count) - snap > 0) {
+ smp_mb(); /* ensure test happens before caller kfree */
+ return;
+ }
+ get_online_cpus();
+ }
+ rcu_expedited_state = RCU_EXPEDITED_STATE_POST;
+ for_each_online_cpu(cpu) {
+ rq = cpu_rq(cpu);
+ req = &per_cpu(rcu_migration_req, cpu);
+ init_completion(&req->done);
+ req->task = NULL;
+ req->dest_cpu = RCU_MIGRATION_NEED_QS;
+ spin_lock_irqsave(&rq->lock, flags);
+ list_add(&req->list, &rq->migration_queue);
+ spin_unlock_irqrestore(&rq->lock, flags);
+ wake_up_process(rq->migration_thread);
+ }
+ for_each_online_cpu(cpu) {
+ rcu_expedited_state = cpu;
+ req = &per_cpu(rcu_migration_req, cpu);
+ rq = cpu_rq(cpu);
+ wait_for_completion(&req->done);
+ spin_lock_irqsave(&rq->lock, flags);
+ if (unlikely(req->dest_cpu == RCU_MIGRATION_MUST_SYNC))
+ need_full_sync = 1;
+ req->dest_cpu = RCU_MIGRATION_IDLE;
+ spin_unlock_irqrestore(&rq->lock, flags);
+ }
+ rcu_expedited_state = RCU_EXPEDITED_STATE_IDLE;
+ mutex_unlock(&rcu_sched_expedited_mutex);
+ put_online_cpus();
+ if (need_full_sync)
+ synchronize_sched();
+}
+EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
+
+#endif /* #else #ifndef CONFIG_SMP */
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index d014efb..0f052fc 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -127,21 +127,11 @@
/*
* If the cpu was currently mapped to a different value, we
- * first need to unmap the old value
+ * need to map it to the new value then remove the old value.
+ * Note, we must add the new value first, otherwise we risk the
+ * cpu being cleared from pri_active, and this cpu could be
+ * missed for a push or pull.
*/
- if (likely(oldpri != CPUPRI_INVALID)) {
- struct cpupri_vec *vec = &cp->pri_to_cpu[oldpri];
-
- spin_lock_irqsave(&vec->lock, flags);
-
- vec->count--;
- if (!vec->count)
- clear_bit(oldpri, cp->pri_active);
- cpumask_clear_cpu(cpu, vec->mask);
-
- spin_unlock_irqrestore(&vec->lock, flags);
- }
-
if (likely(newpri != CPUPRI_INVALID)) {
struct cpupri_vec *vec = &cp->pri_to_cpu[newpri];
@@ -154,6 +144,18 @@
spin_unlock_irqrestore(&vec->lock, flags);
}
+ if (likely(oldpri != CPUPRI_INVALID)) {
+ struct cpupri_vec *vec = &cp->pri_to_cpu[oldpri];
+
+ spin_lock_irqsave(&vec->lock, flags);
+
+ vec->count--;
+ if (!vec->count)
+ clear_bit(oldpri, cp->pri_active);
+ cpumask_clear_cpu(cpu, vec->mask);
+
+ spin_unlock_irqrestore(&vec->lock, flags);
+ }
*currpri = newpri;
}
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 70c7e0b..5ddbd08 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -409,6 +409,8 @@
PN(se.wait_max);
PN(se.wait_sum);
P(se.wait_count);
+ PN(se.iowait_sum);
+ P(se.iowait_count);
P(sched_info.bkl_count);
P(se.nr_migrations);
P(se.nr_migrations_cold);
@@ -479,6 +481,8 @@
p->se.wait_max = 0;
p->se.wait_sum = 0;
p->se.wait_count = 0;
+ p->se.iowait_sum = 0;
+ p->se.iowait_count = 0;
p->se.sleep_max = 0;
p->se.sum_sleep_runtime = 0;
p->se.block_max = 0;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 652e8bd..aa7f841 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -24,7 +24,7 @@
/*
* Targeted preemption latency for CPU-bound tasks:
- * (default: 20ms * (1 + ilog(ncpus)), units: nanoseconds)
+ * (default: 5ms * (1 + ilog(ncpus)), units: nanoseconds)
*
* NOTE: this latency value is not the same as the concept of
* 'timeslice length' - timeslices in CFS are of variable length
@@ -34,13 +34,13 @@
* (to see the precise effective timeslice length of your workload,
* run vmstat and monitor the context-switches (cs) field)
*/
-unsigned int sysctl_sched_latency = 20000000ULL;
+unsigned int sysctl_sched_latency = 5000000ULL;
/*
* Minimal preemption granularity for CPU-bound tasks:
- * (default: 4 msec * (1 + ilog(ncpus)), units: nanoseconds)
+ * (default: 1 msec * (1 + ilog(ncpus)), units: nanoseconds)
*/
-unsigned int sysctl_sched_min_granularity = 4000000ULL;
+unsigned int sysctl_sched_min_granularity = 1000000ULL;
/*
* is kept at sysctl_sched_latency / sysctl_sched_min_granularity
@@ -48,10 +48,10 @@
static unsigned int sched_nr_latency = 5;
/*
- * After fork, child runs first. (default) If set to 0 then
+ * After fork, child runs first. If set to 0 (default) then
* parent will (try to) run first.
*/
-const_debug unsigned int sysctl_sched_child_runs_first = 1;
+unsigned int sysctl_sched_child_runs_first __read_mostly;
/*
* sys_sched_yield() compat mode
@@ -63,13 +63,13 @@
/*
* SCHED_OTHER wake-up granularity.
- * (default: 5 msec * (1 + ilog(ncpus)), units: nanoseconds)
+ * (default: 1 msec * (1 + ilog(ncpus)), units: nanoseconds)
*
* This option delays the preemption effects of decoupled workloads
* and reduces their over-scheduling. Synchronous workloads will still
* have immediate wakeup/sleep latencies.
*/
-unsigned int sysctl_sched_wakeup_granularity = 5000000UL;
+unsigned int sysctl_sched_wakeup_granularity = 1000000UL;
const_debug unsigned int sysctl_sched_migration_cost = 500000UL;
@@ -79,11 +79,6 @@
* CFS operations on generic schedulable entities:
*/
-static inline struct task_struct *task_of(struct sched_entity *se)
-{
- return container_of(se, struct task_struct, se);
-}
-
#ifdef CONFIG_FAIR_GROUP_SCHED
/* cpu runqueue to which this cfs_rq is attached */
@@ -95,6 +90,14 @@
/* An entity is a task if it doesn't "own" a runqueue */
#define entity_is_task(se) (!se->my_q)
+static inline struct task_struct *task_of(struct sched_entity *se)
+{
+#ifdef CONFIG_SCHED_DEBUG
+ WARN_ON_ONCE(!entity_is_task(se));
+#endif
+ return container_of(se, struct task_struct, se);
+}
+
/* Walk up scheduling entities hierarchy */
#define for_each_sched_entity(se) \
for (; se; se = se->parent)
@@ -186,7 +189,12 @@
}
}
-#else /* CONFIG_FAIR_GROUP_SCHED */
+#else /* !CONFIG_FAIR_GROUP_SCHED */
+
+static inline struct task_struct *task_of(struct sched_entity *se)
+{
+ return container_of(se, struct task_struct, se);
+}
static inline struct rq *rq_of(struct cfs_rq *cfs_rq)
{
@@ -537,6 +545,12 @@
schedstat_set(se->wait_count, se->wait_count + 1);
schedstat_set(se->wait_sum, se->wait_sum +
rq_of(cfs_rq)->clock - se->wait_start);
+#ifdef CONFIG_SCHEDSTATS
+ if (entity_is_task(se)) {
+ trace_sched_stat_wait(task_of(se),
+ rq_of(cfs_rq)->clock - se->wait_start);
+ }
+#endif
schedstat_set(se->wait_start, 0);
}
@@ -628,8 +642,10 @@
se->sleep_start = 0;
se->sum_sleep_runtime += delta;
- if (tsk)
+ if (tsk) {
account_scheduler_latency(tsk, delta >> 10, 1);
+ trace_sched_stat_sleep(tsk, delta);
+ }
}
if (se->block_start) {
u64 delta = rq_of(cfs_rq)->clock - se->block_start;
@@ -644,6 +660,12 @@
se->sum_sleep_runtime += delta;
if (tsk) {
+ if (tsk->in_iowait) {
+ se->iowait_sum += delta;
+ se->iowait_count++;
+ trace_sched_stat_iowait(tsk, delta);
+ }
+
/*
* Blocking time is in units of nanosecs, so shift by
* 20 to get a milliseconds-range estimation of the
@@ -705,11 +727,11 @@
vruntime -= thresh;
}
-
- /* ensure we never gain time by being placed backwards. */
- vruntime = max_vruntime(se->vruntime, vruntime);
}
+ /* ensure we never gain time by being placed backwards. */
+ vruntime = max_vruntime(se->vruntime, vruntime);
+
se->vruntime = vruntime;
}
@@ -1046,17 +1068,21 @@
* search starts with cpus closest then further out as needed,
* so we always favor a closer, idle cpu.
* Domains may include CPUs that are not usable for migration,
- * hence we need to mask them out (cpu_active_mask)
+ * hence we need to mask them out (rq->rd->online)
*
* Returns the CPU we should wake onto.
*/
#if defined(ARCH_HAS_SCHED_WAKE_IDLE)
+
+#define cpu_rd_active(cpu, rq) cpumask_test_cpu(cpu, rq->rd->online)
+
static int wake_idle(int cpu, struct task_struct *p)
{
struct sched_domain *sd;
int i;
unsigned int chosen_wakeup_cpu;
int this_cpu;
+ struct rq *task_rq = task_rq(p);
/*
* At POWERSAVINGS_BALANCE_WAKEUP level, if both this_cpu and prev_cpu
@@ -1089,10 +1115,10 @@
for_each_domain(cpu, sd) {
if ((sd->flags & SD_WAKE_IDLE)
|| ((sd->flags & SD_WAKE_IDLE_FAR)
- && !task_hot(p, task_rq(p)->clock, sd))) {
+ && !task_hot(p, task_rq->clock, sd))) {
for_each_cpu_and(i, sched_domain_span(sd),
&p->cpus_allowed) {
- if (cpu_active(i) && idle_cpu(i)) {
+ if (cpu_rd_active(i, task_rq) && idle_cpu(i)) {
if (i != task_cpu(p)) {
schedstat_inc(p,
se.nr_wakeups_idle);
@@ -1235,7 +1261,17 @@
tg = task_group(p);
weight = p->se.load.weight;
- balanced = 100*(tl + effective_load(tg, this_cpu, weight, weight)) <=
+ /*
+ * In low-load situations, where prev_cpu is idle and this_cpu is idle
+ * due to the sync cause above having dropped tl to 0, we'll always have
+ * an imbalance, but there's really nothing you can do about that, so
+ * that's good too.
+ *
+ * Otherwise check if either cpus are near enough in load to allow this
+ * task to be woken on this_cpu.
+ */
+ balanced = !tl ||
+ 100*(tl + effective_load(tg, this_cpu, weight, weight)) <=
imbalance*(load + effective_load(tg, prev_cpu, 0, weight));
/*
@@ -1278,8 +1314,6 @@
this_rq = cpu_rq(this_cpu);
new_cpu = prev_cpu;
- if (prev_cpu == this_cpu)
- goto out;
/*
* 'this_sd' is the first domain that both
* this_cpu and prev_cpu are present in:
@@ -1721,6 +1755,8 @@
sched_info_queued(p);
update_curr(cfs_rq);
+ if (curr)
+ se->vruntime = curr->vruntime;
place_entity(cfs_rq, se, 1);
/* 'curr' will be NULL if the child belongs to a different group */
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 4569bfa..e2dc63a 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -1,4 +1,4 @@
-SCHED_FEAT(NEW_FAIR_SLEEPERS, 1)
+SCHED_FEAT(NEW_FAIR_SLEEPERS, 0)
SCHED_FEAT(NORMALIZED_SLEEPER, 0)
SCHED_FEAT(ADAPTIVE_GRAN, 1)
SCHED_FEAT(WAKEUP_PREEMPT, 1)
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 3918e01..2eb4bd6 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -3,15 +3,18 @@
* policies)
*/
-static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
-{
- return container_of(rt_se, struct task_struct, rt);
-}
-
#ifdef CONFIG_RT_GROUP_SCHED
#define rt_entity_is_task(rt_se) (!(rt_se)->my_q)
+static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
+{
+#ifdef CONFIG_SCHED_DEBUG
+ WARN_ON_ONCE(!rt_entity_is_task(rt_se));
+#endif
+ return container_of(rt_se, struct task_struct, rt);
+}
+
static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
{
return rt_rq->rq;
@@ -26,6 +29,11 @@
#define rt_entity_is_task(rt_se) (1)
+static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
+{
+ return container_of(rt_se, struct task_struct, rt);
+}
+
static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
{
return container_of(rt_rq, struct rq, rt);
@@ -128,6 +136,11 @@
plist_del(&p->pushable_tasks, &rq->rt.pushable_tasks);
}
+static inline int has_pushable_tasks(struct rq *rq)
+{
+ return !plist_head_empty(&rq->rt.pushable_tasks);
+}
+
#else
static inline void enqueue_pushable_task(struct rq *rq, struct task_struct *p)
@@ -602,6 +615,8 @@
curr->se.exec_start = rq->clock;
cpuacct_charge(curr, delta_exec);
+ sched_rt_avg_update(rq, delta_exec);
+
if (!rt_bandwidth_enabled())
return;
@@ -874,8 +889,6 @@
if (!task_current(rq, p) && p->rt.nr_cpus_allowed > 1)
enqueue_pushable_task(rq, p);
-
- inc_cpu_load(rq, p->se.load.weight);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
@@ -886,8 +899,6 @@
dequeue_rt_entity(rt_se);
dequeue_pushable_task(rq, p);
-
- dec_cpu_load(rq, p->se.load.weight);
}
/*
@@ -1064,6 +1075,14 @@
if (p)
dequeue_pushable_task(rq, p);
+#ifdef CONFIG_SMP
+ /*
+ * We detect this state here so that we can avoid taking the RQ
+ * lock again later if there is no need to push
+ */
+ rq->post_schedule = has_pushable_tasks(rq);
+#endif
+
return p;
}
@@ -1162,13 +1181,6 @@
return -1; /* No targets found */
/*
- * Only consider CPUs that are usable for migration.
- * I guess we might want to change cpupri_find() to ignore those
- * in the first place.
- */
- cpumask_and(lowest_mask, lowest_mask, cpu_active_mask);
-
- /*
* At this point we have built a mask of cpus representing the
* lowest priority tasks in the system. Now we want to elect
* the best one based on our affinity and topology.
@@ -1262,11 +1274,6 @@
return lowest_rq;
}
-static inline int has_pushable_tasks(struct rq *rq)
-{
- return !plist_head_empty(&rq->rt.pushable_tasks);
-}
-
static struct task_struct *pick_next_pushable_task(struct rq *rq)
{
struct task_struct *p;
@@ -1466,23 +1473,9 @@
pull_rt_task(rq);
}
-/*
- * assumes rq->lock is held
- */
-static int needs_post_schedule_rt(struct rq *rq)
-{
- return has_pushable_tasks(rq);
-}
-
static void post_schedule_rt(struct rq *rq)
{
- /*
- * This is only called if needs_post_schedule_rt() indicates that
- * we need to push tasks away
- */
- spin_lock_irq(&rq->lock);
push_rt_tasks(rq);
- spin_unlock_irq(&rq->lock);
}
/*
@@ -1758,7 +1751,6 @@
.rq_online = rq_online_rt,
.rq_offline = rq_offline_rt,
.pre_schedule = pre_schedule_rt,
- .needs_post_schedule = needs_post_schedule_rt,
.post_schedule = post_schedule_rt,
.task_wake_up = task_wake_up_rt,
.switched_from = switched_from_rt,
diff --git a/kernel/softirq.c b/kernel/softirq.c
index eb5e131..7db2506 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -227,7 +227,7 @@
preempt_count() = prev_count;
}
- rcu_bh_qsctr_inc(cpu);
+ rcu_bh_qs(cpu);
}
h++;
pending >>= 1;
@@ -721,7 +721,7 @@
preempt_enable_no_resched();
cond_resched();
preempt_disable();
- rcu_qsctr_inc((long)__bind_cpu);
+ rcu_sched_qs((long)__bind_cpu);
}
preempt_enable();
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index 7932653..5ddab73 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -21,44 +21,29 @@
#include <linux/debug_locks.h>
#include <linux/module.h>
+#ifndef _spin_trylock
int __lockfunc _spin_trylock(spinlock_t *lock)
{
- preempt_disable();
- if (_raw_spin_trylock(lock)) {
- spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable();
- return 0;
+ return __spin_trylock(lock);
}
EXPORT_SYMBOL(_spin_trylock);
+#endif
+#ifndef _read_trylock
int __lockfunc _read_trylock(rwlock_t *lock)
{
- preempt_disable();
- if (_raw_read_trylock(lock)) {
- rwlock_acquire_read(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable();
- return 0;
+ return __read_trylock(lock);
}
EXPORT_SYMBOL(_read_trylock);
+#endif
+#ifndef _write_trylock
int __lockfunc _write_trylock(rwlock_t *lock)
{
- preempt_disable();
- if (_raw_write_trylock(lock)) {
- rwlock_acquire(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable();
- return 0;
+ return __write_trylock(lock);
}
EXPORT_SYMBOL(_write_trylock);
+#endif
/*
* If lockdep is enabled then we use the non-preemption spin-ops
@@ -67,132 +52,101 @@
*/
#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
+#ifndef _read_lock
void __lockfunc _read_lock(rwlock_t *lock)
{
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+ __read_lock(lock);
}
EXPORT_SYMBOL(_read_lock);
+#endif
+#ifndef _spin_lock_irqsave
unsigned long __lockfunc _spin_lock_irqsave(spinlock_t *lock)
{
- unsigned long flags;
-
- local_irq_save(flags);
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- /*
- * On lockdep we dont want the hand-coded irq-enable of
- * _raw_spin_lock_flags() code, because lockdep assumes
- * that interrupts are not re-enabled during lock-acquire:
- */
-#ifdef CONFIG_LOCKDEP
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
-#else
- _raw_spin_lock_flags(lock, &flags);
-#endif
- return flags;
+ return __spin_lock_irqsave(lock);
}
EXPORT_SYMBOL(_spin_lock_irqsave);
+#endif
+#ifndef _spin_lock_irq
void __lockfunc _spin_lock_irq(spinlock_t *lock)
{
- local_irq_disable();
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+ __spin_lock_irq(lock);
}
EXPORT_SYMBOL(_spin_lock_irq);
+#endif
+#ifndef _spin_lock_bh
void __lockfunc _spin_lock_bh(spinlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+ __spin_lock_bh(lock);
}
EXPORT_SYMBOL(_spin_lock_bh);
+#endif
+#ifndef _read_lock_irqsave
unsigned long __lockfunc _read_lock_irqsave(rwlock_t *lock)
{
- unsigned long flags;
-
- local_irq_save(flags);
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED_FLAGS(lock, _raw_read_trylock, _raw_read_lock,
- _raw_read_lock_flags, &flags);
- return flags;
+ return __read_lock_irqsave(lock);
}
EXPORT_SYMBOL(_read_lock_irqsave);
+#endif
+#ifndef _read_lock_irq
void __lockfunc _read_lock_irq(rwlock_t *lock)
{
- local_irq_disable();
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+ __read_lock_irq(lock);
}
EXPORT_SYMBOL(_read_lock_irq);
+#endif
+#ifndef _read_lock_bh
void __lockfunc _read_lock_bh(rwlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_read_trylock, _raw_read_lock);
+ __read_lock_bh(lock);
}
EXPORT_SYMBOL(_read_lock_bh);
+#endif
+#ifndef _write_lock_irqsave
unsigned long __lockfunc _write_lock_irqsave(rwlock_t *lock)
{
- unsigned long flags;
-
- local_irq_save(flags);
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED_FLAGS(lock, _raw_write_trylock, _raw_write_lock,
- _raw_write_lock_flags, &flags);
- return flags;
+ return __write_lock_irqsave(lock);
}
EXPORT_SYMBOL(_write_lock_irqsave);
+#endif
+#ifndef _write_lock_irq
void __lockfunc _write_lock_irq(rwlock_t *lock)
{
- local_irq_disable();
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+ __write_lock_irq(lock);
}
EXPORT_SYMBOL(_write_lock_irq);
+#endif
+#ifndef _write_lock_bh
void __lockfunc _write_lock_bh(rwlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+ __write_lock_bh(lock);
}
EXPORT_SYMBOL(_write_lock_bh);
+#endif
+#ifndef _spin_lock
void __lockfunc _spin_lock(spinlock_t *lock)
{
- preempt_disable();
- spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
+ __spin_lock(lock);
}
-
EXPORT_SYMBOL(_spin_lock);
+#endif
+#ifndef _write_lock
void __lockfunc _write_lock(rwlock_t *lock)
{
- preempt_disable();
- rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
- LOCK_CONTENDED(lock, _raw_write_trylock, _raw_write_lock);
+ __write_lock(lock);
}
-
EXPORT_SYMBOL(_write_lock);
+#endif
#else /* CONFIG_PREEMPT: */
@@ -318,125 +272,109 @@
#endif
+#ifndef _spin_unlock
void __lockfunc _spin_unlock(spinlock_t *lock)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- preempt_enable();
+ __spin_unlock(lock);
}
EXPORT_SYMBOL(_spin_unlock);
+#endif
+#ifndef _write_unlock
void __lockfunc _write_unlock(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- preempt_enable();
+ __write_unlock(lock);
}
EXPORT_SYMBOL(_write_unlock);
+#endif
+#ifndef _read_unlock
void __lockfunc _read_unlock(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- preempt_enable();
+ __read_unlock(lock);
}
EXPORT_SYMBOL(_read_unlock);
+#endif
+#ifndef _spin_unlock_irqrestore
void __lockfunc _spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- local_irq_restore(flags);
- preempt_enable();
+ __spin_unlock_irqrestore(lock, flags);
}
EXPORT_SYMBOL(_spin_unlock_irqrestore);
+#endif
+#ifndef _spin_unlock_irq
void __lockfunc _spin_unlock_irq(spinlock_t *lock)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- local_irq_enable();
- preempt_enable();
+ __spin_unlock_irq(lock);
}
EXPORT_SYMBOL(_spin_unlock_irq);
+#endif
+#ifndef _spin_unlock_bh
void __lockfunc _spin_unlock_bh(spinlock_t *lock)
{
- spin_release(&lock->dep_map, 1, _RET_IP_);
- _raw_spin_unlock(lock);
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ __spin_unlock_bh(lock);
}
EXPORT_SYMBOL(_spin_unlock_bh);
+#endif
+#ifndef _read_unlock_irqrestore
void __lockfunc _read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- local_irq_restore(flags);
- preempt_enable();
+ __read_unlock_irqrestore(lock, flags);
}
EXPORT_SYMBOL(_read_unlock_irqrestore);
+#endif
+#ifndef _read_unlock_irq
void __lockfunc _read_unlock_irq(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- local_irq_enable();
- preempt_enable();
+ __read_unlock_irq(lock);
}
EXPORT_SYMBOL(_read_unlock_irq);
+#endif
+#ifndef _read_unlock_bh
void __lockfunc _read_unlock_bh(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_read_unlock(lock);
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ __read_unlock_bh(lock);
}
EXPORT_SYMBOL(_read_unlock_bh);
+#endif
+#ifndef _write_unlock_irqrestore
void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- local_irq_restore(flags);
- preempt_enable();
+ __write_unlock_irqrestore(lock, flags);
}
EXPORT_SYMBOL(_write_unlock_irqrestore);
+#endif
+#ifndef _write_unlock_irq
void __lockfunc _write_unlock_irq(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- local_irq_enable();
- preempt_enable();
+ __write_unlock_irq(lock);
}
EXPORT_SYMBOL(_write_unlock_irq);
+#endif
+#ifndef _write_unlock_bh
void __lockfunc _write_unlock_bh(rwlock_t *lock)
{
- rwlock_release(&lock->dep_map, 1, _RET_IP_);
- _raw_write_unlock(lock);
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+ __write_unlock_bh(lock);
}
EXPORT_SYMBOL(_write_unlock_bh);
+#endif
+#ifndef _spin_trylock_bh
int __lockfunc _spin_trylock_bh(spinlock_t *lock)
{
- local_bh_disable();
- preempt_disable();
- if (_raw_spin_trylock(lock)) {
- spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
- return 1;
- }
-
- preempt_enable_no_resched();
- local_bh_enable_ip((unsigned long)__builtin_return_address(0));
- return 0;
+ return __spin_trylock_bh(lock);
}
EXPORT_SYMBOL(_spin_trylock_bh);
+#endif
notrace int in_lock_functions(unsigned long addr)
{
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 58be760..3125cff 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -49,7 +49,6 @@
#include <linux/acpi.h>
#include <linux/reboot.h>
#include <linux/ftrace.h>
-#include <linux/security.h>
#include <linux/slow-work.h>
#include <linux/perf_counter.h>
@@ -246,6 +245,14 @@
#endif
static struct ctl_table kern_table[] = {
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "sched_child_runs_first",
+ .data = &sysctl_sched_child_runs_first,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
#ifdef CONFIG_SCHED_DEBUG
{
.ctl_name = CTL_UNNUMBERED,
@@ -300,14 +307,6 @@
},
{
.ctl_name = CTL_UNNUMBERED,
- .procname = "sched_child_runs_first",
- .data = &sysctl_sched_child_runs_first,
- .maxlen = sizeof(unsigned int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- {
- .ctl_name = CTL_UNNUMBERED,
.procname = "sched_features",
.data = &sysctl_sched_features,
.maxlen = sizeof(unsigned int),
@@ -332,6 +331,14 @@
},
{
.ctl_name = CTL_UNNUMBERED,
+ .procname = "sched_time_avg",
+ .data = &sysctl_sched_time_avg,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
+ {
+ .ctl_name = CTL_UNNUMBERED,
.procname = "timer_migration",
.data = &sysctl_timer_migration,
.maxlen = sizeof(unsigned int),
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 888adbc..ea8384d 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -108,7 +108,7 @@
/*
* Send taskstats data in @skb to listener with nl_pid @pid
*/
-static int send_reply(struct sk_buff *skb, pid_t pid)
+static int send_reply(struct sk_buff *skb, struct genl_info *info)
{
struct genlmsghdr *genlhdr = nlmsg_data(nlmsg_hdr(skb));
void *reply = genlmsg_data(genlhdr);
@@ -120,7 +120,7 @@
return rc;
}
- return genlmsg_unicast(skb, pid);
+ return genlmsg_reply(skb, info);
}
/*
@@ -150,7 +150,7 @@
if (!skb_next)
break;
}
- rc = genlmsg_unicast(skb_cur, s->pid);
+ rc = genlmsg_unicast(&init_net, skb_cur, s->pid);
if (rc == -ECONNREFUSED) {
s->valid = 0;
delcount++;
@@ -418,7 +418,7 @@
goto err;
}
- rc = send_reply(rep_skb, info->snd_pid);
+ rc = send_reply(rep_skb, info);
err:
fput_light(file, fput_needed);
@@ -487,7 +487,7 @@
} else
goto err;
- return send_reply(rep_skb, info->snd_pid);
+ return send_reply(rep_skb, info);
err:
nlmsg_free(rep_skb);
return rc;
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index a6dcd67..620b58a 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -137,11 +137,12 @@
*/
int clockevents_register_notifier(struct notifier_block *nb)
{
+ unsigned long flags;
int ret;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
ret = raw_notifier_chain_register(&clockevents_chain, nb);
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
return ret;
}
@@ -178,16 +179,18 @@
*/
void clockevents_register_device(struct clock_event_device *dev)
{
+ unsigned long flags;
+
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
BUG_ON(!dev->cpumask);
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
list_add(&dev->list, &clockevent_devices);
clockevents_do_notify(CLOCK_EVT_NOTIFY_ADD, dev);
clockevents_notify_released();
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_register_device);
@@ -235,8 +238,9 @@
void clockevents_notify(unsigned long reason, void *arg)
{
struct list_head *node, *tmp;
+ unsigned long flags;
- spin_lock(&clockevents_lock);
+ spin_lock_irqsave(&clockevents_lock, flags);
clockevents_do_notify(reason, arg);
switch (reason) {
@@ -251,7 +255,7 @@
default:
break;
}
- spin_unlock(&clockevents_lock);
+ spin_unlock_irqrestore(&clockevents_lock, flags);
}
EXPORT_SYMBOL_GPL(clockevents_notify);
#endif
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 877dbed..c2ec250 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -205,11 +205,11 @@
* Powerstate information: The system enters/leaves a state, where
* affected devices might stop
*/
-static void tick_do_broadcast_on_off(void *why)
+static void tick_do_broadcast_on_off(unsigned long *reason)
{
struct clock_event_device *bc, *dev;
struct tick_device *td;
- unsigned long flags, *reason = why;
+ unsigned long flags;
int cpu, bc_stopped;
spin_lock_irqsave(&tick_broadcast_lock, flags);
@@ -276,8 +276,7 @@
printk(KERN_ERR "tick-broadcast: ignoring broadcast for "
"offline CPU #%d\n", *oncpu);
else
- smp_call_function_single(*oncpu, tick_do_broadcast_on_off,
- &reason, 1);
+ tick_do_broadcast_on_off(&reason);
}
/*
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index a999b92..fddd69d 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -286,7 +286,7 @@
{
struct proc_dir_entry *pe;
- pe = proc_create("timer_list", 0644, NULL, &timer_list_fops);
+ pe = proc_create("timer_list", 0444, NULL, &timer_list_fops);
if (!pe)
return -ENOMEM;
return 0;
diff --git a/kernel/timer.c b/kernel/timer.c
index a7f07d5..a3d25f415 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1156,8 +1156,7 @@
/* Note: this timer irq context must be accounted for as well. */
account_process_tick(p, user_tick);
run_local_timers();
- if (rcu_pending(cpu))
- rcu_check_callbacks(cpu, user_tick);
+ rcu_check_callbacks(cpu, user_tick);
printk_tick();
scheduler_tick();
run_posix_cpu_timers(p);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 019f380..1ea0d12 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -41,7 +41,7 @@
config HAVE_HW_BRANCH_TRACER
bool
-config HAVE_FTRACE_SYSCALLS
+config HAVE_SYSCALL_TRACEPOINTS
bool
config TRACER_MAX_TRACE
@@ -60,9 +60,14 @@
bool
config CONTEXT_SWITCH_TRACER
- select MARKERS
bool
+config RING_BUFFER_ALLOW_SWAP
+ bool
+ help
+ Allow the use of ring_buffer_swap_cpu.
+ Adds a very slight overhead to tracing when enabled.
+
# All tracer options should select GENERIC_TRACER. For those options that are
# enabled by all tracers (context switch and event tracer) they select TRACING.
# This allows those options to appear when no other tracer is selected. But the
@@ -147,6 +152,7 @@
select TRACE_IRQFLAGS
select GENERIC_TRACER
select TRACER_MAX_TRACE
+ select RING_BUFFER_ALLOW_SWAP
help
This option measures the time spent in irqs-off critical
sections, with microsecond accuracy.
@@ -168,6 +174,7 @@
depends on PREEMPT
select GENERIC_TRACER
select TRACER_MAX_TRACE
+ select RING_BUFFER_ALLOW_SWAP
help
This option measures the time spent in preemption off critical
sections, with microsecond accuracy.
@@ -211,7 +218,7 @@
config FTRACE_SYSCALLS
bool "Trace syscalls"
- depends on HAVE_FTRACE_SYSCALLS
+ depends on HAVE_SYSCALL_TRACEPOINTS
select GENERIC_TRACER
select KALLSYMS
help
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 7a34cb5..3eb159c 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -65,13 +65,15 @@
{
struct blk_io_trace *t;
struct ring_buffer_event *event = NULL;
+ struct ring_buffer *buffer = NULL;
int pc = 0;
int cpu = smp_processor_id();
bool blk_tracer = blk_tracer_enabled;
if (blk_tracer) {
+ buffer = blk_tr->buffer;
pc = preempt_count();
- event = trace_buffer_lock_reserve(blk_tr, TRACE_BLK,
+ event = trace_buffer_lock_reserve(buffer, TRACE_BLK,
sizeof(*t) + len,
0, pc);
if (!event)
@@ -96,7 +98,7 @@
memcpy((void *) t + sizeof(*t), data, len);
if (blk_tracer)
- trace_buffer_unlock_commit(blk_tr, event, 0, pc);
+ trace_buffer_unlock_commit(buffer, event, 0, pc);
}
}
@@ -179,6 +181,7 @@
{
struct task_struct *tsk = current;
struct ring_buffer_event *event = NULL;
+ struct ring_buffer *buffer = NULL;
struct blk_io_trace *t;
unsigned long flags = 0;
unsigned long *sequence;
@@ -204,8 +207,9 @@
if (blk_tracer) {
tracing_record_cmdline(current);
+ buffer = blk_tr->buffer;
pc = preempt_count();
- event = trace_buffer_lock_reserve(blk_tr, TRACE_BLK,
+ event = trace_buffer_lock_reserve(buffer, TRACE_BLK,
sizeof(*t) + pdu_len,
0, pc);
if (!event)
@@ -252,7 +256,7 @@
memcpy((void *) t + sizeof(*t), pdu_data, pdu_len);
if (blk_tracer) {
- trace_buffer_unlock_commit(blk_tr, event, 0, pc);
+ trace_buffer_unlock_commit(buffer, event, 0, pc);
return;
}
}
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 1e1d23c..8c804e2 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1016,71 +1016,35 @@
__ftrace_replace_code(struct dyn_ftrace *rec, int enable)
{
unsigned long ftrace_addr;
- unsigned long ip, fl;
+ unsigned long flag = 0UL;
ftrace_addr = (unsigned long)FTRACE_ADDR;
- ip = rec->ip;
-
/*
- * If this record is not to be traced and
- * it is not enabled then do nothing.
+ * If this record is not to be traced or we want to disable it,
+ * then disable it.
*
- * If this record is not to be traced and
- * it is enabled then disable it.
+ * If we want to enable it and filtering is off, then enable it.
*
+ * If we want to enable it and filtering is on, enable it only if
+ * it's filtered
*/
- if (rec->flags & FTRACE_FL_NOTRACE) {
- if (rec->flags & FTRACE_FL_ENABLED)
- rec->flags &= ~FTRACE_FL_ENABLED;
- else
- return 0;
-
- } else if (ftrace_filtered && enable) {
- /*
- * Filtering is on:
- */
-
- fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_ENABLED);
-
- /* Record is filtered and enabled, do nothing */
- if (fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED))
- return 0;
-
- /* Record is not filtered or enabled, do nothing */
- if (!fl)
- return 0;
-
- /* Record is not filtered but enabled, disable it */
- if (fl == FTRACE_FL_ENABLED)
- rec->flags &= ~FTRACE_FL_ENABLED;
- else
- /* Otherwise record is filtered but not enabled, enable it */
- rec->flags |= FTRACE_FL_ENABLED;
- } else {
- /* Disable or not filtered */
-
- if (enable) {
- /* if record is enabled, do nothing */
- if (rec->flags & FTRACE_FL_ENABLED)
- return 0;
-
- rec->flags |= FTRACE_FL_ENABLED;
-
- } else {
-
- /* if record is not enabled, do nothing */
- if (!(rec->flags & FTRACE_FL_ENABLED))
- return 0;
-
- rec->flags &= ~FTRACE_FL_ENABLED;
- }
+ if (enable && !(rec->flags & FTRACE_FL_NOTRACE)) {
+ if (!ftrace_filtered || (rec->flags & FTRACE_FL_FILTER))
+ flag = FTRACE_FL_ENABLED;
}
- if (rec->flags & FTRACE_FL_ENABLED)
+ /* If the state of this record hasn't changed, then do nothing */
+ if ((rec->flags & FTRACE_FL_ENABLED) == flag)
+ return 0;
+
+ if (flag) {
+ rec->flags |= FTRACE_FL_ENABLED;
return ftrace_make_call(rec, ftrace_addr);
- else
- return ftrace_make_nop(NULL, rec, ftrace_addr);
+ }
+
+ rec->flags &= ~FTRACE_FL_ENABLED;
+ return ftrace_make_nop(NULL, rec, ftrace_addr);
}
static void ftrace_replace_code(int enable)
@@ -1375,7 +1339,6 @@
unsigned flags;
unsigned char buffer[FTRACE_BUFF_MAX+1];
unsigned buffer_idx;
- unsigned filtered;
};
static void *
@@ -1438,18 +1401,13 @@
{
struct ftrace_func_probe *rec;
struct hlist_node *hnd = v;
- char str[KSYM_SYMBOL_LEN];
rec = hlist_entry(hnd, struct ftrace_func_probe, node);
if (rec->ops->print)
return rec->ops->print(m, rec->ip, rec->ops, rec->data);
- kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
- seq_printf(m, "%s:", str);
-
- kallsyms_lookup((unsigned long)rec->ops->func, NULL, NULL, NULL, str);
- seq_printf(m, "%s", str);
+ seq_printf(m, "%pf:%pf", (void *)rec->ip, (void *)rec->ops->func);
if (rec->data)
seq_printf(m, ":%p", rec->data);
@@ -1547,7 +1505,6 @@
{
struct ftrace_iterator *iter = m->private;
struct dyn_ftrace *rec = v;
- char str[KSYM_SYMBOL_LEN];
if (iter->flags & FTRACE_ITER_HASH)
return t_hash_show(m, v);
@@ -1560,9 +1517,7 @@
if (!rec)
return 0;
- kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
-
- seq_printf(m, "%s\n", str);
+ seq_printf(m, "%pf\n", (void *)rec->ip);
return 0;
}
@@ -1601,17 +1556,6 @@
return ret;
}
-int ftrace_avail_release(struct inode *inode, struct file *file)
-{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct ftrace_iterator *iter = m->private;
-
- seq_release(inode, file);
- kfree(iter);
-
- return 0;
-}
-
static int
ftrace_failures_open(struct inode *inode, struct file *file)
{
@@ -2278,7 +2222,11 @@
read++;
cnt--;
- if (!(iter->flags & ~FTRACE_ITER_CONT)) {
+ /*
+ * If the parser haven't finished with the last write,
+ * continue reading the user input without skipping spaces.
+ */
+ if (!(iter->flags & FTRACE_ITER_CONT)) {
/* skip white space */
while (cnt && isspace(ch)) {
ret = get_user(ch, ubuf++);
@@ -2288,8 +2236,9 @@
cnt--;
}
+ /* only spaces were written */
if (isspace(ch)) {
- file->f_pos += read;
+ *ppos += read;
ret = read;
goto out;
}
@@ -2312,19 +2261,18 @@
}
if (isspace(ch)) {
- iter->filtered++;
iter->buffer[iter->buffer_idx] = 0;
ret = ftrace_process_regex(iter->buffer,
iter->buffer_idx, enable);
if (ret)
goto out;
iter->buffer_idx = 0;
- } else
+ } else {
iter->flags |= FTRACE_ITER_CONT;
+ iter->buffer[iter->buffer_idx++] = ch;
+ }
-
- file->f_pos += read;
-
+ *ppos += read;
ret = read;
out:
mutex_unlock(&ftrace_regex_lock);
@@ -2443,7 +2391,6 @@
iter = file->private_data;
if (iter->buffer_idx) {
- iter->filtered++;
iter->buffer[iter->buffer_idx] = 0;
ftrace_match_records(iter->buffer, iter->buffer_idx, enable);
}
@@ -2474,14 +2421,14 @@
.open = ftrace_avail_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = ftrace_avail_release,
+ .release = seq_release_private,
};
static const struct file_operations ftrace_failures_fops = {
.open = ftrace_failures_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = ftrace_avail_release,
+ .release = seq_release_private,
};
static const struct file_operations ftrace_filter_fops = {
@@ -2543,7 +2490,6 @@
static int g_show(struct seq_file *m, void *v)
{
unsigned long *ptr = v;
- char str[KSYM_SYMBOL_LEN];
if (!ptr)
return 0;
@@ -2553,9 +2499,7 @@
return 0;
}
- kallsyms_lookup(*ptr, NULL, NULL, NULL, str);
-
- seq_printf(m, "%s\n", str);
+ seq_printf(m, "%pf\n", v);
return 0;
}
diff --git a/kernel/trace/kmemtrace.c b/kernel/trace/kmemtrace.c
index 1edaa95..81b1645 100644
--- a/kernel/trace/kmemtrace.c
+++ b/kernel/trace/kmemtrace.c
@@ -183,11 +183,9 @@
static int kmem_trace_init(struct trace_array *tr)
{
- int cpu;
kmemtrace_array = tr;
- for_each_cpu(cpu, cpu_possible_mask)
- tracing_reset(tr, cpu);
+ tracing_reset_online_cpus(tr);
kmemtrace_start_probes();
@@ -239,12 +237,52 @@
};
static enum print_line_t
-kmemtrace_print_alloc_user(struct trace_iterator *iter,
- struct kmemtrace_alloc_entry *entry)
+kmemtrace_print_alloc(struct trace_iterator *iter, int flags)
{
- struct kmemtrace_user_event_alloc *ev_alloc;
struct trace_seq *s = &iter->seq;
+ struct kmemtrace_alloc_entry *entry;
+ int ret;
+
+ trace_assign_type(entry, iter->ent);
+
+ ret = trace_seq_printf(s, "type_id %d call_site %pF ptr %lu "
+ "bytes_req %lu bytes_alloc %lu gfp_flags %lu node %d\n",
+ entry->type_id, (void *)entry->call_site, (unsigned long)entry->ptr,
+ (unsigned long)entry->bytes_req, (unsigned long)entry->bytes_alloc,
+ (unsigned long)entry->gfp_flags, entry->node);
+
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+ return TRACE_TYPE_HANDLED;
+}
+
+static enum print_line_t
+kmemtrace_print_free(struct trace_iterator *iter, int flags)
+{
+ struct trace_seq *s = &iter->seq;
+ struct kmemtrace_free_entry *entry;
+ int ret;
+
+ trace_assign_type(entry, iter->ent);
+
+ ret = trace_seq_printf(s, "type_id %d call_site %pF ptr %lu\n",
+ entry->type_id, (void *)entry->call_site,
+ (unsigned long)entry->ptr);
+
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+ return TRACE_TYPE_HANDLED;
+}
+
+static enum print_line_t
+kmemtrace_print_alloc_user(struct trace_iterator *iter, int flags)
+{
+ struct trace_seq *s = &iter->seq;
+ struct kmemtrace_alloc_entry *entry;
struct kmemtrace_user_event *ev;
+ struct kmemtrace_user_event_alloc *ev_alloc;
+
+ trace_assign_type(entry, iter->ent);
ev = trace_seq_reserve(s, sizeof(*ev));
if (!ev)
@@ -271,12 +309,14 @@
}
static enum print_line_t
-kmemtrace_print_free_user(struct trace_iterator *iter,
- struct kmemtrace_free_entry *entry)
+kmemtrace_print_free_user(struct trace_iterator *iter, int flags)
{
struct trace_seq *s = &iter->seq;
+ struct kmemtrace_free_entry *entry;
struct kmemtrace_user_event *ev;
+ trace_assign_type(entry, iter->ent);
+
ev = trace_seq_reserve(s, sizeof(*ev));
if (!ev)
return TRACE_TYPE_PARTIAL_LINE;
@@ -294,12 +334,14 @@
/* The two other following provide a more minimalistic output */
static enum print_line_t
-kmemtrace_print_alloc_compress(struct trace_iterator *iter,
- struct kmemtrace_alloc_entry *entry)
+kmemtrace_print_alloc_compress(struct trace_iterator *iter)
{
+ struct kmemtrace_alloc_entry *entry;
struct trace_seq *s = &iter->seq;
int ret;
+ trace_assign_type(entry, iter->ent);
+
/* Alloc entry */
ret = trace_seq_printf(s, " + ");
if (!ret)
@@ -345,29 +387,24 @@
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
- /* Node */
- ret = trace_seq_printf(s, "%4d ", entry->node);
+ /* Node and call site*/
+ ret = trace_seq_printf(s, "%4d %pf\n", entry->node,
+ (void *)entry->call_site);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
- /* Call site */
- ret = seq_print_ip_sym(s, entry->call_site, 0);
- if (!ret)
- return TRACE_TYPE_PARTIAL_LINE;
-
- if (!trace_seq_printf(s, "\n"))
- return TRACE_TYPE_PARTIAL_LINE;
-
return TRACE_TYPE_HANDLED;
}
static enum print_line_t
-kmemtrace_print_free_compress(struct trace_iterator *iter,
- struct kmemtrace_free_entry *entry)
+kmemtrace_print_free_compress(struct trace_iterator *iter)
{
+ struct kmemtrace_free_entry *entry;
struct trace_seq *s = &iter->seq;
int ret;
+ trace_assign_type(entry, iter->ent);
+
/* Free entry */
ret = trace_seq_printf(s, " - ");
if (!ret)
@@ -401,19 +438,11 @@
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
- /* Skip node */
- ret = trace_seq_printf(s, " ");
+ /* Skip node and print call site*/
+ ret = trace_seq_printf(s, " %pf\n", (void *)entry->call_site);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
- /* Call site */
- ret = seq_print_ip_sym(s, entry->call_site, 0);
- if (!ret)
- return TRACE_TYPE_PARTIAL_LINE;
-
- if (!trace_seq_printf(s, "\n"))
- return TRACE_TYPE_PARTIAL_LINE;
-
return TRACE_TYPE_HANDLED;
}
@@ -421,32 +450,31 @@
{
struct trace_entry *entry = iter->ent;
+ if (!(kmem_tracer_flags.val & TRACE_KMEM_OPT_MINIMAL))
+ return TRACE_TYPE_UNHANDLED;
+
switch (entry->type) {
- case TRACE_KMEM_ALLOC: {
- struct kmemtrace_alloc_entry *field;
-
- trace_assign_type(field, entry);
- if (kmem_tracer_flags.val & TRACE_KMEM_OPT_MINIMAL)
- return kmemtrace_print_alloc_compress(iter, field);
- else
- return kmemtrace_print_alloc_user(iter, field);
- }
-
- case TRACE_KMEM_FREE: {
- struct kmemtrace_free_entry *field;
-
- trace_assign_type(field, entry);
- if (kmem_tracer_flags.val & TRACE_KMEM_OPT_MINIMAL)
- return kmemtrace_print_free_compress(iter, field);
- else
- return kmemtrace_print_free_user(iter, field);
- }
-
+ case TRACE_KMEM_ALLOC:
+ return kmemtrace_print_alloc_compress(iter);
+ case TRACE_KMEM_FREE:
+ return kmemtrace_print_free_compress(iter);
default:
return TRACE_TYPE_UNHANDLED;
}
}
+static struct trace_event kmem_trace_alloc = {
+ .type = TRACE_KMEM_ALLOC,
+ .trace = kmemtrace_print_alloc,
+ .binary = kmemtrace_print_alloc_user,
+};
+
+static struct trace_event kmem_trace_free = {
+ .type = TRACE_KMEM_FREE,
+ .trace = kmemtrace_print_free,
+ .binary = kmemtrace_print_free_user,
+};
+
static struct tracer kmem_tracer __read_mostly = {
.name = "kmemtrace",
.init = kmem_trace_init,
@@ -463,6 +491,21 @@
static int __init init_kmem_tracer(void)
{
- return register_tracer(&kmem_tracer);
+ if (!register_ftrace_event(&kmem_trace_alloc)) {
+ pr_warning("Warning: could not register kmem events\n");
+ return 1;
+ }
+
+ if (!register_ftrace_event(&kmem_trace_free)) {
+ pr_warning("Warning: could not register kmem events\n");
+ return 1;
+ }
+
+ if (!register_tracer(&kmem_tracer)) {
+ pr_warning("Warning: could not register the kmem tracer\n");
+ return 1;
+ }
+
+ return 0;
}
device_initcall(init_kmem_tracer);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index a330513..454e74e 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -218,17 +218,12 @@
static inline int rb_null_event(struct ring_buffer_event *event)
{
- return event->type_len == RINGBUF_TYPE_PADDING
- && event->time_delta == 0;
-}
-
-static inline int rb_discarded_event(struct ring_buffer_event *event)
-{
- return event->type_len == RINGBUF_TYPE_PADDING && event->time_delta;
+ return event->type_len == RINGBUF_TYPE_PADDING && !event->time_delta;
}
static void rb_event_set_padding(struct ring_buffer_event *event)
{
+ /* padding has a NULL time_delta */
event->type_len = RINGBUF_TYPE_PADDING;
event->time_delta = 0;
}
@@ -322,6 +317,14 @@
unsigned char data[]; /* data of buffer page */
};
+/*
+ * Note, the buffer_page list must be first. The buffer pages
+ * are allocated in cache lines, which means that each buffer
+ * page will be at the beginning of a cache line, and thus
+ * the least significant bits will be zero. We use this to
+ * add flags in the list struct pointers, to make the ring buffer
+ * lockless.
+ */
struct buffer_page {
struct list_head list; /* list of buffer pages */
local_t write; /* index for next write */
@@ -330,6 +333,21 @@
struct buffer_data_page *page; /* Actual data page */
};
+/*
+ * The buffer page counters, write and entries, must be reset
+ * atomically when crossing page boundaries. To synchronize this
+ * update, two counters are inserted into the number. One is
+ * the actual counter for the write position or count on the page.
+ *
+ * The other is a counter of updaters. Before an update happens
+ * the update partition of the counter is incremented. This will
+ * allow the updater to update the counter atomically.
+ *
+ * The counter is 20 bits, and the state data is 12.
+ */
+#define RB_WRITE_MASK 0xfffff
+#define RB_WRITE_INTCNT (1 << 20)
+
static void rb_init_page(struct buffer_data_page *bpage)
{
local_set(&bpage->commit, 0);
@@ -403,21 +421,20 @@
struct ring_buffer_per_cpu {
int cpu;
struct ring_buffer *buffer;
- spinlock_t reader_lock; /* serialize readers */
+ spinlock_t reader_lock; /* serialize readers */
raw_spinlock_t lock;
struct lock_class_key lock_key;
- struct list_head pages;
+ struct list_head *pages;
struct buffer_page *head_page; /* read from head */
struct buffer_page *tail_page; /* write to tail */
struct buffer_page *commit_page; /* committed pages */
struct buffer_page *reader_page;
- unsigned long nmi_dropped;
- unsigned long commit_overrun;
- unsigned long overrun;
- unsigned long read;
+ local_t commit_overrun;
+ local_t overrun;
local_t entries;
local_t committing;
local_t commits;
+ unsigned long read;
u64 write_stamp;
u64 read_stamp;
atomic_t record_disabled;
@@ -450,14 +467,19 @@
};
/* buffer may be either ring_buffer or ring_buffer_per_cpu */
-#define RB_WARN_ON(buffer, cond) \
- ({ \
- int _____ret = unlikely(cond); \
- if (_____ret) { \
- atomic_inc(&buffer->record_disabled); \
- WARN_ON(1); \
- } \
- _____ret; \
+#define RB_WARN_ON(b, cond) \
+ ({ \
+ int _____ret = unlikely(cond); \
+ if (_____ret) { \
+ if (__same_type(*(b), struct ring_buffer_per_cpu)) { \
+ struct ring_buffer_per_cpu *__b = \
+ (void *)b; \
+ atomic_inc(&__b->buffer->record_disabled); \
+ } else \
+ atomic_inc(&b->record_disabled); \
+ WARN_ON(1); \
+ } \
+ _____ret; \
})
/* Up this if you want to test the TIME_EXTENTS and normalization */
@@ -489,6 +511,390 @@
}
EXPORT_SYMBOL_GPL(ring_buffer_normalize_time_stamp);
+/*
+ * Making the ring buffer lockless makes things tricky.
+ * Although writes only happen on the CPU that they are on,
+ * and they only need to worry about interrupts. Reads can
+ * happen on any CPU.
+ *
+ * The reader page is always off the ring buffer, but when the
+ * reader finishes with a page, it needs to swap its page with
+ * a new one from the buffer. The reader needs to take from
+ * the head (writes go to the tail). But if a writer is in overwrite
+ * mode and wraps, it must push the head page forward.
+ *
+ * Here lies the problem.
+ *
+ * The reader must be careful to replace only the head page, and
+ * not another one. As described at the top of the file in the
+ * ASCII art, the reader sets its old page to point to the next
+ * page after head. It then sets the page after head to point to
+ * the old reader page. But if the writer moves the head page
+ * during this operation, the reader could end up with the tail.
+ *
+ * We use cmpxchg to help prevent this race. We also do something
+ * special with the page before head. We set the LSB to 1.
+ *
+ * When the writer must push the page forward, it will clear the
+ * bit that points to the head page, move the head, and then set
+ * the bit that points to the new head page.
+ *
+ * We also don't want an interrupt coming in and moving the head
+ * page on another writer. Thus we use the second LSB to catch
+ * that too. Thus:
+ *
+ * head->list->prev->next bit 1 bit 0
+ * ------- -------
+ * Normal page 0 0
+ * Points to head page 0 1
+ * New head page 1 0
+ *
+ * Note we can not trust the prev pointer of the head page, because:
+ *
+ * +----+ +-----+ +-----+
+ * | |------>| T |---X--->| N |
+ * | |<------| | | |
+ * +----+ +-----+ +-----+
+ * ^ ^ |
+ * | +-----+ | |
+ * +----------| R |----------+ |
+ * | |<-----------+
+ * +-----+
+ *
+ * Key: ---X--> HEAD flag set in pointer
+ * T Tail page
+ * R Reader page
+ * N Next page
+ *
+ * (see __rb_reserve_next() to see where this happens)
+ *
+ * What the above shows is that the reader just swapped out
+ * the reader page with a page in the buffer, but before it
+ * could make the new header point back to the new page added
+ * it was preempted by a writer. The writer moved forward onto
+ * the new page added by the reader and is about to move forward
+ * again.
+ *
+ * You can see, it is legitimate for the previous pointer of
+ * the head (or any page) not to point back to itself. But only
+ * temporarially.
+ */
+
+#define RB_PAGE_NORMAL 0UL
+#define RB_PAGE_HEAD 1UL
+#define RB_PAGE_UPDATE 2UL
+
+
+#define RB_FLAG_MASK 3UL
+
+/* PAGE_MOVED is not part of the mask */
+#define RB_PAGE_MOVED 4UL
+
+/*
+ * rb_list_head - remove any bit
+ */
+static struct list_head *rb_list_head(struct list_head *list)
+{
+ unsigned long val = (unsigned long)list;
+
+ return (struct list_head *)(val & ~RB_FLAG_MASK);
+}
+
+/*
+ * rb_is_head_page - test if the give page is the head page
+ *
+ * Because the reader may move the head_page pointer, we can
+ * not trust what the head page is (it may be pointing to
+ * the reader page). But if the next page is a header page,
+ * its flags will be non zero.
+ */
+static int inline
+rb_is_head_page(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *page, struct list_head *list)
+{
+ unsigned long val;
+
+ val = (unsigned long)list->next;
+
+ if ((val & ~RB_FLAG_MASK) != (unsigned long)&page->list)
+ return RB_PAGE_MOVED;
+
+ return val & RB_FLAG_MASK;
+}
+
+/*
+ * rb_is_reader_page
+ *
+ * The unique thing about the reader page, is that, if the
+ * writer is ever on it, the previous pointer never points
+ * back to the reader page.
+ */
+static int rb_is_reader_page(struct buffer_page *page)
+{
+ struct list_head *list = page->list.prev;
+
+ return rb_list_head(list->next) != &page->list;
+}
+
+/*
+ * rb_set_list_to_head - set a list_head to be pointing to head.
+ */
+static void rb_set_list_to_head(struct ring_buffer_per_cpu *cpu_buffer,
+ struct list_head *list)
+{
+ unsigned long *ptr;
+
+ ptr = (unsigned long *)&list->next;
+ *ptr |= RB_PAGE_HEAD;
+ *ptr &= ~RB_PAGE_UPDATE;
+}
+
+/*
+ * rb_head_page_activate - sets up head page
+ */
+static void rb_head_page_activate(struct ring_buffer_per_cpu *cpu_buffer)
+{
+ struct buffer_page *head;
+
+ head = cpu_buffer->head_page;
+ if (!head)
+ return;
+
+ /*
+ * Set the previous list pointer to have the HEAD flag.
+ */
+ rb_set_list_to_head(cpu_buffer, head->list.prev);
+}
+
+static void rb_list_head_clear(struct list_head *list)
+{
+ unsigned long *ptr = (unsigned long *)&list->next;
+
+ *ptr &= ~RB_FLAG_MASK;
+}
+
+/*
+ * rb_head_page_dactivate - clears head page ptr (for free list)
+ */
+static void
+rb_head_page_deactivate(struct ring_buffer_per_cpu *cpu_buffer)
+{
+ struct list_head *hd;
+
+ /* Go through the whole list and clear any pointers found. */
+ rb_list_head_clear(cpu_buffer->pages);
+
+ list_for_each(hd, cpu_buffer->pages)
+ rb_list_head_clear(hd);
+}
+
+static int rb_head_page_set(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *head,
+ struct buffer_page *prev,
+ int old_flag, int new_flag)
+{
+ struct list_head *list;
+ unsigned long val = (unsigned long)&head->list;
+ unsigned long ret;
+
+ list = &prev->list;
+
+ val &= ~RB_FLAG_MASK;
+
+ ret = (unsigned long)cmpxchg(&list->next,
+ val | old_flag, val | new_flag);
+
+ /* check if the reader took the page */
+ if ((ret & ~RB_FLAG_MASK) != val)
+ return RB_PAGE_MOVED;
+
+ return ret & RB_FLAG_MASK;
+}
+
+static int rb_head_page_set_update(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *head,
+ struct buffer_page *prev,
+ int old_flag)
+{
+ return rb_head_page_set(cpu_buffer, head, prev,
+ old_flag, RB_PAGE_UPDATE);
+}
+
+static int rb_head_page_set_head(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *head,
+ struct buffer_page *prev,
+ int old_flag)
+{
+ return rb_head_page_set(cpu_buffer, head, prev,
+ old_flag, RB_PAGE_HEAD);
+}
+
+static int rb_head_page_set_normal(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *head,
+ struct buffer_page *prev,
+ int old_flag)
+{
+ return rb_head_page_set(cpu_buffer, head, prev,
+ old_flag, RB_PAGE_NORMAL);
+}
+
+static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page **bpage)
+{
+ struct list_head *p = rb_list_head((*bpage)->list.next);
+
+ *bpage = list_entry(p, struct buffer_page, list);
+}
+
+static struct buffer_page *
+rb_set_head_page(struct ring_buffer_per_cpu *cpu_buffer)
+{
+ struct buffer_page *head;
+ struct buffer_page *page;
+ struct list_head *list;
+ int i;
+
+ if (RB_WARN_ON(cpu_buffer, !cpu_buffer->head_page))
+ return NULL;
+
+ /* sanity check */
+ list = cpu_buffer->pages;
+ if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev->next) != list))
+ return NULL;
+
+ page = head = cpu_buffer->head_page;
+ /*
+ * It is possible that the writer moves the header behind
+ * where we started, and we miss in one loop.
+ * A second loop should grab the header, but we'll do
+ * three loops just because I'm paranoid.
+ */
+ for (i = 0; i < 3; i++) {
+ do {
+ if (rb_is_head_page(cpu_buffer, page, page->list.prev)) {
+ cpu_buffer->head_page = page;
+ return page;
+ }
+ rb_inc_page(cpu_buffer, &page);
+ } while (page != head);
+ }
+
+ RB_WARN_ON(cpu_buffer, 1);
+
+ return NULL;
+}
+
+static int rb_head_page_replace(struct buffer_page *old,
+ struct buffer_page *new)
+{
+ unsigned long *ptr = (unsigned long *)&old->list.prev->next;
+ unsigned long val;
+ unsigned long ret;
+
+ val = *ptr & ~RB_FLAG_MASK;
+ val |= RB_PAGE_HEAD;
+
+ ret = cmpxchg(ptr, val, &new->list);
+
+ return ret == val;
+}
+
+/*
+ * rb_tail_page_update - move the tail page forward
+ *
+ * Returns 1 if moved tail page, 0 if someone else did.
+ */
+static int rb_tail_page_update(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *tail_page,
+ struct buffer_page *next_page)
+{
+ struct buffer_page *old_tail;
+ unsigned long old_entries;
+ unsigned long old_write;
+ int ret = 0;
+
+ /*
+ * The tail page now needs to be moved forward.
+ *
+ * We need to reset the tail page, but without messing
+ * with possible erasing of data brought in by interrupts
+ * that have moved the tail page and are currently on it.
+ *
+ * We add a counter to the write field to denote this.
+ */
+ old_write = local_add_return(RB_WRITE_INTCNT, &next_page->write);
+ old_entries = local_add_return(RB_WRITE_INTCNT, &next_page->entries);
+
+ /*
+ * Just make sure we have seen our old_write and synchronize
+ * with any interrupts that come in.
+ */
+ barrier();
+
+ /*
+ * If the tail page is still the same as what we think
+ * it is, then it is up to us to update the tail
+ * pointer.
+ */
+ if (tail_page == cpu_buffer->tail_page) {
+ /* Zero the write counter */
+ unsigned long val = old_write & ~RB_WRITE_MASK;
+ unsigned long eval = old_entries & ~RB_WRITE_MASK;
+
+ /*
+ * This will only succeed if an interrupt did
+ * not come in and change it. In which case, we
+ * do not want to modify it.
+ *
+ * We add (void) to let the compiler know that we do not care
+ * about the return value of these functions. We use the
+ * cmpxchg to only update if an interrupt did not already
+ * do it for us. If the cmpxchg fails, we don't care.
+ */
+ (void)local_cmpxchg(&next_page->write, old_write, val);
+ (void)local_cmpxchg(&next_page->entries, old_entries, eval);
+
+ /*
+ * No need to worry about races with clearing out the commit.
+ * it only can increment when a commit takes place. But that
+ * only happens in the outer most nested commit.
+ */
+ local_set(&next_page->page->commit, 0);
+
+ old_tail = cmpxchg(&cpu_buffer->tail_page,
+ tail_page, next_page);
+
+ if (old_tail == tail_page)
+ ret = 1;
+ }
+
+ return ret;
+}
+
+static int rb_check_bpage(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *bpage)
+{
+ unsigned long val = (unsigned long)bpage;
+
+ if (RB_WARN_ON(cpu_buffer, val & RB_FLAG_MASK))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * rb_check_list - make sure a pointer to a list has the last bits zero
+ */
+static int rb_check_list(struct ring_buffer_per_cpu *cpu_buffer,
+ struct list_head *list)
+{
+ if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev) != list->prev))
+ return 1;
+ if (RB_WARN_ON(cpu_buffer, rb_list_head(list->next) != list->next))
+ return 1;
+ return 0;
+}
+
/**
* check_pages - integrity check of buffer pages
* @cpu_buffer: CPU buffer with pages to test
@@ -498,14 +904,19 @@
*/
static int rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer)
{
- struct list_head *head = &cpu_buffer->pages;
+ struct list_head *head = cpu_buffer->pages;
struct buffer_page *bpage, *tmp;
+ rb_head_page_deactivate(cpu_buffer);
+
if (RB_WARN_ON(cpu_buffer, head->next->prev != head))
return -1;
if (RB_WARN_ON(cpu_buffer, head->prev->next != head))
return -1;
+ if (rb_check_list(cpu_buffer, head))
+ return -1;
+
list_for_each_entry_safe(bpage, tmp, head, list) {
if (RB_WARN_ON(cpu_buffer,
bpage->list.next->prev != &bpage->list))
@@ -513,25 +924,33 @@
if (RB_WARN_ON(cpu_buffer,
bpage->list.prev->next != &bpage->list))
return -1;
+ if (rb_check_list(cpu_buffer, &bpage->list))
+ return -1;
}
+ rb_head_page_activate(cpu_buffer);
+
return 0;
}
static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
unsigned nr_pages)
{
- struct list_head *head = &cpu_buffer->pages;
struct buffer_page *bpage, *tmp;
unsigned long addr;
LIST_HEAD(pages);
unsigned i;
+ WARN_ON(!nr_pages);
+
for (i = 0; i < nr_pages; i++) {
bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()),
GFP_KERNEL, cpu_to_node(cpu_buffer->cpu));
if (!bpage)
goto free_pages;
+
+ rb_check_bpage(cpu_buffer, bpage);
+
list_add(&bpage->list, &pages);
addr = __get_free_page(GFP_KERNEL);
@@ -541,7 +960,13 @@
rb_init_page(bpage->page);
}
- list_splice(&pages, head);
+ /*
+ * The ring buffer page list is a circular list that does not
+ * start and end with a list head. All page list items point to
+ * other pages.
+ */
+ cpu_buffer->pages = pages.next;
+ list_del(&pages);
rb_check_pages(cpu_buffer);
@@ -573,13 +998,14 @@
spin_lock_init(&cpu_buffer->reader_lock);
lockdep_set_class(&cpu_buffer->reader_lock, buffer->reader_lock_key);
cpu_buffer->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
- INIT_LIST_HEAD(&cpu_buffer->pages);
bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()),
GFP_KERNEL, cpu_to_node(cpu));
if (!bpage)
goto fail_free_buffer;
+ rb_check_bpage(cpu_buffer, bpage);
+
cpu_buffer->reader_page = bpage;
addr = __get_free_page(GFP_KERNEL);
if (!addr)
@@ -594,9 +1020,11 @@
goto fail_free_reader;
cpu_buffer->head_page
- = list_entry(cpu_buffer->pages.next, struct buffer_page, list);
+ = list_entry(cpu_buffer->pages, struct buffer_page, list);
cpu_buffer->tail_page = cpu_buffer->commit_page = cpu_buffer->head_page;
+ rb_head_page_activate(cpu_buffer);
+
return cpu_buffer;
fail_free_reader:
@@ -609,15 +1037,22 @@
static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer)
{
- struct list_head *head = &cpu_buffer->pages;
+ struct list_head *head = cpu_buffer->pages;
struct buffer_page *bpage, *tmp;
free_buffer_page(cpu_buffer->reader_page);
- list_for_each_entry_safe(bpage, tmp, head, list) {
- list_del_init(&bpage->list);
+ rb_head_page_deactivate(cpu_buffer);
+
+ if (head) {
+ list_for_each_entry_safe(bpage, tmp, head, list) {
+ list_del_init(&bpage->list);
+ free_buffer_page(bpage);
+ }
+ bpage = list_entry(head, struct buffer_page, list);
free_buffer_page(bpage);
}
+
kfree(cpu_buffer);
}
@@ -760,15 +1195,17 @@
atomic_inc(&cpu_buffer->record_disabled);
synchronize_sched();
+ rb_head_page_deactivate(cpu_buffer);
+
for (i = 0; i < nr_pages; i++) {
- if (RB_WARN_ON(cpu_buffer, list_empty(&cpu_buffer->pages)))
+ if (RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)))
return;
- p = cpu_buffer->pages.next;
+ p = cpu_buffer->pages->next;
bpage = list_entry(p, struct buffer_page, list);
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
- if (RB_WARN_ON(cpu_buffer, list_empty(&cpu_buffer->pages)))
+ if (RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)))
return;
rb_reset_cpu(cpu_buffer);
@@ -790,15 +1227,19 @@
atomic_inc(&cpu_buffer->record_disabled);
synchronize_sched();
+ spin_lock_irq(&cpu_buffer->reader_lock);
+ rb_head_page_deactivate(cpu_buffer);
+
for (i = 0; i < nr_pages; i++) {
if (RB_WARN_ON(cpu_buffer, list_empty(pages)))
return;
p = pages->next;
bpage = list_entry(p, struct buffer_page, list);
list_del_init(&bpage->list);
- list_add_tail(&bpage->list, &cpu_buffer->pages);
+ list_add_tail(&bpage->list, cpu_buffer->pages);
}
rb_reset_cpu(cpu_buffer);
+ spin_unlock_irq(&cpu_buffer->reader_lock);
rb_check_pages(cpu_buffer);
@@ -949,21 +1390,14 @@
}
static inline struct ring_buffer_event *
-rb_head_event(struct ring_buffer_per_cpu *cpu_buffer)
-{
- return __rb_page_index(cpu_buffer->head_page,
- cpu_buffer->head_page->read);
-}
-
-static inline struct ring_buffer_event *
rb_iter_head_event(struct ring_buffer_iter *iter)
{
return __rb_page_index(iter->head_page, iter->head);
}
-static inline unsigned rb_page_write(struct buffer_page *bpage)
+static inline unsigned long rb_page_write(struct buffer_page *bpage)
{
- return local_read(&bpage->write);
+ return local_read(&bpage->write) & RB_WRITE_MASK;
}
static inline unsigned rb_page_commit(struct buffer_page *bpage)
@@ -971,6 +1405,11 @@
return local_read(&bpage->page->commit);
}
+static inline unsigned long rb_page_entries(struct buffer_page *bpage)
+{
+ return local_read(&bpage->entries) & RB_WRITE_MASK;
+}
+
/* Size is determined by what has been commited */
static inline unsigned rb_page_size(struct buffer_page *bpage)
{
@@ -983,22 +1422,6 @@
return rb_page_commit(cpu_buffer->commit_page);
}
-static inline unsigned rb_head_size(struct ring_buffer_per_cpu *cpu_buffer)
-{
- return rb_page_commit(cpu_buffer->head_page);
-}
-
-static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer,
- struct buffer_page **bpage)
-{
- struct list_head *p = (*bpage)->list.next;
-
- if (p == &cpu_buffer->pages)
- p = p->next;
-
- *bpage = list_entry(p, struct buffer_page, list);
-}
-
static inline unsigned
rb_event_index(struct ring_buffer_event *event)
{
@@ -1024,6 +1447,8 @@
static void
rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer)
{
+ unsigned long max_count;
+
/*
* We only race with interrupts and NMIs on this CPU.
* If we own the commit event, then we can commit
@@ -1033,9 +1458,16 @@
* assign the commit to the tail.
*/
again:
+ max_count = cpu_buffer->buffer->pages * 100;
+
while (cpu_buffer->commit_page != cpu_buffer->tail_page) {
- cpu_buffer->commit_page->page->commit =
- cpu_buffer->commit_page->write;
+ if (RB_WARN_ON(cpu_buffer, !(--max_count)))
+ return;
+ if (RB_WARN_ON(cpu_buffer,
+ rb_is_reader_page(cpu_buffer->tail_page)))
+ return;
+ local_set(&cpu_buffer->commit_page->page->commit,
+ rb_page_write(cpu_buffer->commit_page));
rb_inc_page(cpu_buffer, &cpu_buffer->commit_page);
cpu_buffer->write_stamp =
cpu_buffer->commit_page->page->time_stamp;
@@ -1044,8 +1476,12 @@
}
while (rb_commit_index(cpu_buffer) !=
rb_page_write(cpu_buffer->commit_page)) {
- cpu_buffer->commit_page->page->commit =
- cpu_buffer->commit_page->write;
+
+ local_set(&cpu_buffer->commit_page->page->commit,
+ rb_page_write(cpu_buffer->commit_page));
+ RB_WARN_ON(cpu_buffer,
+ local_read(&cpu_buffer->commit_page->page->commit) &
+ ~RB_WRITE_MASK);
barrier();
}
@@ -1078,7 +1514,7 @@
* to the head page instead of next.
*/
if (iter->head_page == cpu_buffer->reader_page)
- iter->head_page = cpu_buffer->head_page;
+ iter->head_page = rb_set_head_page(cpu_buffer);
else
rb_inc_page(cpu_buffer, &iter->head_page);
@@ -1122,6 +1558,163 @@
}
}
+/*
+ * rb_handle_head_page - writer hit the head page
+ *
+ * Returns: +1 to retry page
+ * 0 to continue
+ * -1 on error
+ */
+static int
+rb_handle_head_page(struct ring_buffer_per_cpu *cpu_buffer,
+ struct buffer_page *tail_page,
+ struct buffer_page *next_page)
+{
+ struct buffer_page *new_head;
+ int entries;
+ int type;
+ int ret;
+
+ entries = rb_page_entries(next_page);
+
+ /*
+ * The hard part is here. We need to move the head
+ * forward, and protect against both readers on
+ * other CPUs and writers coming in via interrupts.
+ */
+ type = rb_head_page_set_update(cpu_buffer, next_page, tail_page,
+ RB_PAGE_HEAD);
+
+ /*
+ * type can be one of four:
+ * NORMAL - an interrupt already moved it for us
+ * HEAD - we are the first to get here.
+ * UPDATE - we are the interrupt interrupting
+ * a current move.
+ * MOVED - a reader on another CPU moved the next
+ * pointer to its reader page. Give up
+ * and try again.
+ */
+
+ switch (type) {
+ case RB_PAGE_HEAD:
+ /*
+ * We changed the head to UPDATE, thus
+ * it is our responsibility to update
+ * the counters.
+ */
+ local_add(entries, &cpu_buffer->overrun);
+
+ /*
+ * The entries will be zeroed out when we move the
+ * tail page.
+ */
+
+ /* still more to do */
+ break;
+
+ case RB_PAGE_UPDATE:
+ /*
+ * This is an interrupt that interrupt the
+ * previous update. Still more to do.
+ */
+ break;
+ case RB_PAGE_NORMAL:
+ /*
+ * An interrupt came in before the update
+ * and processed this for us.
+ * Nothing left to do.
+ */
+ return 1;
+ case RB_PAGE_MOVED:
+ /*
+ * The reader is on another CPU and just did
+ * a swap with our next_page.
+ * Try again.
+ */
+ return 1;
+ default:
+ RB_WARN_ON(cpu_buffer, 1); /* WTF??? */
+ return -1;
+ }
+
+ /*
+ * Now that we are here, the old head pointer is
+ * set to UPDATE. This will keep the reader from
+ * swapping the head page with the reader page.
+ * The reader (on another CPU) will spin till
+ * we are finished.
+ *
+ * We just need to protect against interrupts
+ * doing the job. We will set the next pointer
+ * to HEAD. After that, we set the old pointer
+ * to NORMAL, but only if it was HEAD before.
+ * otherwise we are an interrupt, and only
+ * want the outer most commit to reset it.
+ */
+ new_head = next_page;
+ rb_inc_page(cpu_buffer, &new_head);
+
+ ret = rb_head_page_set_head(cpu_buffer, new_head, next_page,
+ RB_PAGE_NORMAL);
+
+ /*
+ * Valid returns are:
+ * HEAD - an interrupt came in and already set it.
+ * NORMAL - One of two things:
+ * 1) We really set it.
+ * 2) A bunch of interrupts came in and moved
+ * the page forward again.
+ */
+ switch (ret) {
+ case RB_PAGE_HEAD:
+ case RB_PAGE_NORMAL:
+ /* OK */
+ break;
+ default:
+ RB_WARN_ON(cpu_buffer, 1);
+ return -1;
+ }
+
+ /*
+ * It is possible that an interrupt came in,
+ * set the head up, then more interrupts came in
+ * and moved it again. When we get back here,
+ * the page would have been set to NORMAL but we
+ * just set it back to HEAD.
+ *
+ * How do you detect this? Well, if that happened
+ * the tail page would have moved.
+ */
+ if (ret == RB_PAGE_NORMAL) {
+ /*
+ * If the tail had moved passed next, then we need
+ * to reset the pointer.
+ */
+ if (cpu_buffer->tail_page != tail_page &&
+ cpu_buffer->tail_page != next_page)
+ rb_head_page_set_normal(cpu_buffer, new_head,
+ next_page,
+ RB_PAGE_HEAD);
+ }
+
+ /*
+ * If this was the outer most commit (the one that
+ * changed the original pointer from HEAD to UPDATE),
+ * then it is up to us to reset it to NORMAL.
+ */
+ if (type == RB_PAGE_HEAD) {
+ ret = rb_head_page_set_normal(cpu_buffer, next_page,
+ tail_page,
+ RB_PAGE_UPDATE);
+ if (RB_WARN_ON(cpu_buffer,
+ ret != RB_PAGE_UPDATE))
+ return -1;
+ }
+
+ return 0;
+}
+
static unsigned rb_calculate_event_length(unsigned length)
{
struct ring_buffer_event event; /* Used only for sizeof array */
@@ -1185,9 +1778,6 @@
event->type_len = RINGBUF_TYPE_PADDING;
/* time delta must be non zero */
event->time_delta = 1;
- /* Account for this as an entry */
- local_inc(&tail_page->entries);
- local_inc(&cpu_buffer->entries);
/* Set write to end of buffer */
length = (tail + length) - BUF_PAGE_SIZE;
@@ -1200,96 +1790,93 @@
struct buffer_page *commit_page,
struct buffer_page *tail_page, u64 *ts)
{
- struct buffer_page *next_page, *head_page, *reader_page;
struct ring_buffer *buffer = cpu_buffer->buffer;
- bool lock_taken = false;
- unsigned long flags;
+ struct buffer_page *next_page;
+ int ret;
next_page = tail_page;
- local_irq_save(flags);
- /*
- * Since the write to the buffer is still not
- * fully lockless, we must be careful with NMIs.
- * The locks in the writers are taken when a write
- * crosses to a new page. The locks protect against
- * races with the readers (this will soon be fixed
- * with a lockless solution).
- *
- * Because we can not protect against NMIs, and we
- * want to keep traces reentrant, we need to manage
- * what happens when we are in an NMI.
- *
- * NMIs can happen after we take the lock.
- * If we are in an NMI, only take the lock
- * if it is not already taken. Otherwise
- * simply fail.
- */
- if (unlikely(in_nmi())) {
- if (!__raw_spin_trylock(&cpu_buffer->lock)) {
- cpu_buffer->nmi_dropped++;
- goto out_reset;
- }
- } else
- __raw_spin_lock(&cpu_buffer->lock);
-
- lock_taken = true;
-
rb_inc_page(cpu_buffer, &next_page);
- head_page = cpu_buffer->head_page;
- reader_page = cpu_buffer->reader_page;
-
- /* we grabbed the lock before incrementing */
- if (RB_WARN_ON(cpu_buffer, next_page == reader_page))
- goto out_reset;
-
/*
* If for some reason, we had an interrupt storm that made
* it all the way around the buffer, bail, and warn
* about it.
*/
if (unlikely(next_page == commit_page)) {
- cpu_buffer->commit_overrun++;
+ local_inc(&cpu_buffer->commit_overrun);
goto out_reset;
}
- if (next_page == head_page) {
- if (!(buffer->flags & RB_FL_OVERWRITE))
- goto out_reset;
+ /*
+ * This is where the fun begins!
+ *
+ * We are fighting against races between a reader that
+ * could be on another CPU trying to swap its reader
+ * page with the buffer head.
+ *
+ * We are also fighting against interrupts coming in and
+ * moving the head or tail on us as well.
+ *
+ * If the next page is the head page then we have filled
+ * the buffer, unless the commit page is still on the
+ * reader page.
+ */
+ if (rb_is_head_page(cpu_buffer, next_page, &tail_page->list)) {
- /* tail_page has not moved yet? */
- if (tail_page == cpu_buffer->tail_page) {
- /* count overflows */
- cpu_buffer->overrun +=
- local_read(&head_page->entries);
+ /*
+ * If the commit is not on the reader page, then
+ * move the header page.
+ */
+ if (!rb_is_reader_page(cpu_buffer->commit_page)) {
+ /*
+ * If we are not in overwrite mode,
+ * this is easy, just stop here.
+ */
+ if (!(buffer->flags & RB_FL_OVERWRITE))
+ goto out_reset;
- rb_inc_page(cpu_buffer, &head_page);
- cpu_buffer->head_page = head_page;
- cpu_buffer->head_page->read = 0;
+ ret = rb_handle_head_page(cpu_buffer,
+ tail_page,
+ next_page);
+ if (ret < 0)
+ goto out_reset;
+ if (ret)
+ goto out_again;
+ } else {
+ /*
+ * We need to be careful here too. The
+ * commit page could still be on the reader
+ * page. We could have a small buffer, and
+ * have filled up the buffer with events
+ * from interrupts and such, and wrapped.
+ *
+ * Note, if the tail page is also the on the
+ * reader_page, we let it move out.
+ */
+ if (unlikely((cpu_buffer->commit_page !=
+ cpu_buffer->tail_page) &&
+ (cpu_buffer->commit_page ==
+ cpu_buffer->reader_page))) {
+ local_inc(&cpu_buffer->commit_overrun);
+ goto out_reset;
+ }
}
}
- /*
- * If the tail page is still the same as what we think
- * it is, then it is up to us to update the tail
- * pointer.
- */
- if (tail_page == cpu_buffer->tail_page) {
- local_set(&next_page->write, 0);
- local_set(&next_page->entries, 0);
- local_set(&next_page->page->commit, 0);
- cpu_buffer->tail_page = next_page;
-
- /* reread the time stamp */
+ ret = rb_tail_page_update(cpu_buffer, tail_page, next_page);
+ if (ret) {
+ /*
+ * Nested commits always have zero deltas, so
+ * just reread the time stamp
+ */
*ts = rb_time_stamp(buffer, cpu_buffer->cpu);
- cpu_buffer->tail_page->page->time_stamp = *ts;
+ next_page->page->time_stamp = *ts;
}
- rb_reset_tail(cpu_buffer, tail_page, tail, length);
+ out_again:
- __raw_spin_unlock(&cpu_buffer->lock);
- local_irq_restore(flags);
+ rb_reset_tail(cpu_buffer, tail_page, tail, length);
/* fail and let the caller try again */
return ERR_PTR(-EAGAIN);
@@ -1298,9 +1885,6 @@
/* reset write */
rb_reset_tail(cpu_buffer, tail_page, tail, length);
- if (likely(lock_taken))
- __raw_spin_unlock(&cpu_buffer->lock);
- local_irq_restore(flags);
return NULL;
}
@@ -1317,6 +1901,9 @@
barrier();
tail_page = cpu_buffer->tail_page;
write = local_add_return(length, &tail_page->write);
+
+ /* set write to only the index of the write */
+ write &= RB_WRITE_MASK;
tail = write - length;
/* See if we shot pass the end of this buffer page */
@@ -1361,12 +1948,16 @@
bpage = cpu_buffer->tail_page;
if (bpage->page == (void *)addr && rb_page_write(bpage) == old_index) {
+ unsigned long write_mask =
+ local_read(&bpage->write) & ~RB_WRITE_MASK;
/*
* This is on the tail page. It is possible that
* a write could come in and move the tail page
* and write to the next page. That is fine
* because we just shorten what is on this page.
*/
+ old_index += write_mask;
+ new_index += write_mask;
index = local_cmpxchg(&bpage->write, old_index, new_index);
if (index == old_index)
return 1;
@@ -1482,7 +2073,8 @@
}
static struct ring_buffer_event *
-rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer,
+rb_reserve_next_event(struct ring_buffer *buffer,
+ struct ring_buffer_per_cpu *cpu_buffer,
unsigned long length)
{
struct ring_buffer_event *event;
@@ -1492,6 +2084,21 @@
rb_start_commit(cpu_buffer);
+#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
+ /*
+ * Due to the ability to swap a cpu buffer from a buffer
+ * it is possible it was swapped before we committed.
+ * (committing stops a swap). We check for it here and
+ * if it happened, we have to fail the write.
+ */
+ barrier();
+ if (unlikely(ACCESS_ONCE(cpu_buffer->buffer) != buffer)) {
+ local_dec(&cpu_buffer->committing);
+ local_dec(&cpu_buffer->commits);
+ return NULL;
+ }
+#endif
+
length = rb_calculate_event_length(length);
again:
/*
@@ -1652,7 +2259,7 @@
if (length > BUF_MAX_DATA_SIZE)
goto out;
- event = rb_reserve_next_event(cpu_buffer, length);
+ event = rb_reserve_next_event(buffer, cpu_buffer, length);
if (!event)
goto out;
@@ -1675,18 +2282,23 @@
}
EXPORT_SYMBOL_GPL(ring_buffer_lock_reserve);
-static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer,
+static void
+rb_update_write_stamp(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
- local_inc(&cpu_buffer->entries);
-
/*
* The event first in the commit queue updates the
* time stamp.
*/
if (rb_event_is_commit(cpu_buffer, event))
cpu_buffer->write_stamp += event->time_delta;
+}
+static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer,
+ struct ring_buffer_event *event)
+{
+ local_inc(&cpu_buffer->entries);
+ rb_update_write_stamp(cpu_buffer, event);
rb_end_commit(cpu_buffer);
}
@@ -1733,32 +2345,57 @@
event->time_delta = 1;
}
-/**
- * ring_buffer_event_discard - discard any event in the ring buffer
- * @event: the event to discard
- *
- * Sometimes a event that is in the ring buffer needs to be ignored.
- * This function lets the user discard an event in the ring buffer
- * and then that event will not be read later.
- *
- * Note, it is up to the user to be careful with this, and protect
- * against races. If the user discards an event that has been consumed
- * it is possible that it could corrupt the ring buffer.
+/*
+ * Decrement the entries to the page that an event is on.
+ * The event does not even need to exist, only the pointer
+ * to the page it is on. This may only be called before the commit
+ * takes place.
*/
-void ring_buffer_event_discard(struct ring_buffer_event *event)
+static inline void
+rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
+ struct ring_buffer_event *event)
{
- rb_event_discard(event);
+ unsigned long addr = (unsigned long)event;
+ struct buffer_page *bpage = cpu_buffer->commit_page;
+ struct buffer_page *start;
+
+ addr &= PAGE_MASK;
+
+ /* Do the likely case first */
+ if (likely(bpage->page == (void *)addr)) {
+ local_dec(&bpage->entries);
+ return;
+ }
+
+ /*
+ * Because the commit page may be on the reader page we
+ * start with the next page and check the end loop there.
+ */
+ rb_inc_page(cpu_buffer, &bpage);
+ start = bpage;
+ do {
+ if (bpage->page == (void *)addr) {
+ local_dec(&bpage->entries);
+ return;
+ }
+ rb_inc_page(cpu_buffer, &bpage);
+ } while (bpage != start);
+
+ /* commit not part of this buffer?? */
+ RB_WARN_ON(cpu_buffer, 1);
}
-EXPORT_SYMBOL_GPL(ring_buffer_event_discard);
/**
* ring_buffer_commit_discard - discard an event that has not been committed
* @buffer: the ring buffer
* @event: non committed event to discard
*
- * This is similar to ring_buffer_event_discard but must only be
- * performed on an event that has not been committed yet. The difference
- * is that this will also try to free the event from the ring buffer
+ * Sometimes an event that is in the ring buffer needs to be ignored.
+ * This function lets the user discard an event in the ring buffer
+ * and then that event will not be read later.
+ *
+ * This function only works if it is called before the the item has been
+ * committed. It will try to free the event from the ring buffer
* if another event has not been added behind it.
*
* If another event has been added behind it, it will set the event
@@ -1786,14 +2423,15 @@
*/
RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing));
+ rb_decrement_entry(cpu_buffer, event);
if (rb_try_to_discard(cpu_buffer, event))
goto out;
/*
* The commit is still visible by the reader, so we
- * must increment entries.
+ * must still update the timestamp.
*/
- local_inc(&cpu_buffer->entries);
+ rb_update_write_stamp(cpu_buffer, event);
out:
rb_end_commit(cpu_buffer);
@@ -1854,7 +2492,7 @@
if (length > BUF_MAX_DATA_SIZE)
goto out;
- event = rb_reserve_next_event(cpu_buffer, length);
+ event = rb_reserve_next_event(buffer, cpu_buffer, length);
if (!event)
goto out;
@@ -1875,9 +2513,13 @@
static int rb_per_cpu_empty(struct ring_buffer_per_cpu *cpu_buffer)
{
struct buffer_page *reader = cpu_buffer->reader_page;
- struct buffer_page *head = cpu_buffer->head_page;
+ struct buffer_page *head = rb_set_head_page(cpu_buffer);
struct buffer_page *commit = cpu_buffer->commit_page;
+ /* In case of error, head will be NULL */
+ if (unlikely(!head))
+ return 1;
+
return reader->read == rb_page_commit(reader) &&
(commit == reader ||
(commit == head &&
@@ -1968,7 +2610,7 @@
return 0;
cpu_buffer = buffer->buffers[cpu];
- ret = (local_read(&cpu_buffer->entries) - cpu_buffer->overrun)
+ ret = (local_read(&cpu_buffer->entries) - local_read(&cpu_buffer->overrun))
- cpu_buffer->read;
return ret;
@@ -1989,33 +2631,13 @@
return 0;
cpu_buffer = buffer->buffers[cpu];
- ret = cpu_buffer->overrun;
+ ret = local_read(&cpu_buffer->overrun);
return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu);
/**
- * ring_buffer_nmi_dropped_cpu - get the number of nmis that were dropped
- * @buffer: The ring buffer
- * @cpu: The per CPU buffer to get the number of overruns from
- */
-unsigned long ring_buffer_nmi_dropped_cpu(struct ring_buffer *buffer, int cpu)
-{
- struct ring_buffer_per_cpu *cpu_buffer;
- unsigned long ret;
-
- if (!cpumask_test_cpu(cpu, buffer->cpumask))
- return 0;
-
- cpu_buffer = buffer->buffers[cpu];
- ret = cpu_buffer->nmi_dropped;
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(ring_buffer_nmi_dropped_cpu);
-
-/**
* ring_buffer_commit_overrun_cpu - get the number of overruns caused by commits
* @buffer: The ring buffer
* @cpu: The per CPU buffer to get the number of overruns from
@@ -2030,7 +2652,7 @@
return 0;
cpu_buffer = buffer->buffers[cpu];
- ret = cpu_buffer->commit_overrun;
+ ret = local_read(&cpu_buffer->commit_overrun);
return ret;
}
@@ -2053,7 +2675,7 @@
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
entries += (local_read(&cpu_buffer->entries) -
- cpu_buffer->overrun) - cpu_buffer->read;
+ local_read(&cpu_buffer->overrun)) - cpu_buffer->read;
}
return entries;
@@ -2076,7 +2698,7 @@
/* if you care about this being correct, lock the buffer */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
- overruns += cpu_buffer->overrun;
+ overruns += local_read(&cpu_buffer->overrun);
}
return overruns;
@@ -2089,8 +2711,10 @@
/* Iterator usage is expected to have record disabled */
if (list_empty(&cpu_buffer->reader_page->list)) {
- iter->head_page = cpu_buffer->head_page;
- iter->head = cpu_buffer->head_page->read;
+ iter->head_page = rb_set_head_page(cpu_buffer);
+ if (unlikely(!iter->head_page))
+ return;
+ iter->head = iter->head_page->read;
} else {
iter->head_page = cpu_buffer->reader_page;
iter->head = cpu_buffer->reader_page->read;
@@ -2207,6 +2831,7 @@
struct buffer_page *reader = NULL;
unsigned long flags;
int nr_loops = 0;
+ int ret;
local_irq_save(flags);
__raw_spin_lock(&cpu_buffer->lock);
@@ -2240,30 +2865,56 @@
goto out;
/*
- * Splice the empty reader page into the list around the head.
* Reset the reader page to size zero.
*/
-
- reader = cpu_buffer->head_page;
- cpu_buffer->reader_page->list.next = reader->list.next;
- cpu_buffer->reader_page->list.prev = reader->list.prev;
-
local_set(&cpu_buffer->reader_page->write, 0);
local_set(&cpu_buffer->reader_page->entries, 0);
local_set(&cpu_buffer->reader_page->page->commit, 0);
- /* Make the reader page now replace the head */
- reader->list.prev->next = &cpu_buffer->reader_page->list;
- reader->list.next->prev = &cpu_buffer->reader_page->list;
+ spin:
+ /*
+ * Splice the empty reader page into the list around the head.
+ */
+ reader = rb_set_head_page(cpu_buffer);
+ cpu_buffer->reader_page->list.next = reader->list.next;
+ cpu_buffer->reader_page->list.prev = reader->list.prev;
/*
- * If the tail is on the reader, then we must set the head
- * to the inserted page, otherwise we set it one before.
+ * cpu_buffer->pages just needs to point to the buffer, it
+ * has no specific buffer page to point to. Lets move it out
+ * of our way so we don't accidently swap it.
*/
- cpu_buffer->head_page = cpu_buffer->reader_page;
+ cpu_buffer->pages = reader->list.prev;
- if (cpu_buffer->commit_page != reader)
- rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
+ /* The reader page will be pointing to the new head */
+ rb_set_list_to_head(cpu_buffer, &cpu_buffer->reader_page->list);
+
+ /*
+ * Here's the tricky part.
+ *
+ * We need to move the pointer past the header page.
+ * But we can only do that if a writer is not currently
+ * moving it. The page before the header page has the
+ * flag bit '1' set if it is pointing to the page we want.
+ * but if the writer is in the process of moving it
+ * than it will be '2' or already moved '0'.
+ */
+
+ ret = rb_head_page_replace(reader, cpu_buffer->reader_page);
+
+ /*
+ * If we did not convert it, then we must try again.
+ */
+ if (!ret)
+ goto spin;
+
+ /*
+ * Yeah! We succeeded in replacing the page.
+ *
+ * Now make the new head point back to the reader page.
+ */
+ reader->list.next->prev = &cpu_buffer->reader_page->list;
+ rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
/* Finally update the reader page to the new head */
cpu_buffer->reader_page = reader;
@@ -2292,8 +2943,7 @@
event = rb_reader_event(cpu_buffer);
- if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX
- || rb_discarded_event(event))
+ if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
cpu_buffer->read++;
rb_update_read_stamp(cpu_buffer, event);
@@ -2525,10 +3175,8 @@
spin_unlock(&cpu_buffer->reader_lock);
local_irq_restore(flags);
- if (event && event->type_len == RINGBUF_TYPE_PADDING) {
- cpu_relax();
+ if (event && event->type_len == RINGBUF_TYPE_PADDING)
goto again;
- }
return event;
}
@@ -2553,10 +3201,8 @@
event = rb_iter_peek(iter, ts);
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
- if (event && event->type_len == RINGBUF_TYPE_PADDING) {
- cpu_relax();
+ if (event && event->type_len == RINGBUF_TYPE_PADDING)
goto again;
- }
return event;
}
@@ -2602,10 +3248,8 @@
out:
preempt_enable();
- if (event && event->type_len == RINGBUF_TYPE_PADDING) {
- cpu_relax();
+ if (event && event->type_len == RINGBUF_TYPE_PADDING)
goto again;
- }
return event;
}
@@ -2685,21 +3329,19 @@
struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
unsigned long flags;
- again:
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+ again:
event = rb_iter_peek(iter, ts);
if (!event)
goto out;
+ if (event->type_len == RINGBUF_TYPE_PADDING)
+ goto again;
+
rb_advance_iter(iter);
out:
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
- if (event && event->type_len == RINGBUF_TYPE_PADDING) {
- cpu_relax();
- goto again;
- }
-
return event;
}
EXPORT_SYMBOL_GPL(ring_buffer_read);
@@ -2717,8 +3359,10 @@
static void
rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
{
+ rb_head_page_deactivate(cpu_buffer);
+
cpu_buffer->head_page
- = list_entry(cpu_buffer->pages.next, struct buffer_page, list);
+ = list_entry(cpu_buffer->pages, struct buffer_page, list);
local_set(&cpu_buffer->head_page->write, 0);
local_set(&cpu_buffer->head_page->entries, 0);
local_set(&cpu_buffer->head_page->page->commit, 0);
@@ -2734,16 +3378,17 @@
local_set(&cpu_buffer->reader_page->page->commit, 0);
cpu_buffer->reader_page->read = 0;
- cpu_buffer->nmi_dropped = 0;
- cpu_buffer->commit_overrun = 0;
- cpu_buffer->overrun = 0;
- cpu_buffer->read = 0;
+ local_set(&cpu_buffer->commit_overrun, 0);
+ local_set(&cpu_buffer->overrun, 0);
local_set(&cpu_buffer->entries, 0);
local_set(&cpu_buffer->committing, 0);
local_set(&cpu_buffer->commits, 0);
+ cpu_buffer->read = 0;
cpu_buffer->write_stamp = 0;
cpu_buffer->read_stamp = 0;
+
+ rb_head_page_activate(cpu_buffer);
}
/**
@@ -2763,12 +3408,16 @@
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+ if (RB_WARN_ON(cpu_buffer, local_read(&cpu_buffer->committing)))
+ goto out;
+
__raw_spin_lock(&cpu_buffer->lock);
rb_reset_cpu(cpu_buffer);
__raw_spin_unlock(&cpu_buffer->lock);
+ out:
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
atomic_dec(&cpu_buffer->record_disabled);
@@ -2851,6 +3500,7 @@
}
EXPORT_SYMBOL_GPL(ring_buffer_empty_cpu);
+#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
/**
* ring_buffer_swap_cpu - swap a CPU buffer between two ring buffers
* @buffer_a: One buffer to swap with
@@ -2905,20 +3555,28 @@
atomic_inc(&cpu_buffer_a->record_disabled);
atomic_inc(&cpu_buffer_b->record_disabled);
+ ret = -EBUSY;
+ if (local_read(&cpu_buffer_a->committing))
+ goto out_dec;
+ if (local_read(&cpu_buffer_b->committing))
+ goto out_dec;
+
buffer_a->buffers[cpu] = cpu_buffer_b;
buffer_b->buffers[cpu] = cpu_buffer_a;
cpu_buffer_b->buffer = buffer_a;
cpu_buffer_a->buffer = buffer_b;
+ ret = 0;
+
+out_dec:
atomic_dec(&cpu_buffer_a->record_disabled);
atomic_dec(&cpu_buffer_b->record_disabled);
-
- ret = 0;
out:
return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu);
+#endif /* CONFIG_RING_BUFFER_ALLOW_SWAP */
/**
* ring_buffer_alloc_read_page - allocate a page to read from buffer
@@ -3091,7 +3749,7 @@
read = 0;
} else {
/* update the entry counter */
- cpu_buffer->read += local_read(&reader->entries);
+ cpu_buffer->read += rb_page_entries(reader);
/* swap the pages */
rb_init_page(bpage);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index c22b40f..5c75dee 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -43,14 +43,11 @@
#define TRACE_BUFFER_FLAGS (RB_FL_OVERWRITE)
-unsigned long __read_mostly tracing_max_latency;
-unsigned long __read_mostly tracing_thresh;
-
/*
* On boot up, the ring buffer is set to the minimum size, so that
* we do not waste memory on systems that are not using tracing.
*/
-static int ring_buffer_expanded;
+int ring_buffer_expanded;
/*
* We need to change this state when a selftest is running.
@@ -64,7 +61,7 @@
/*
* If a tracer is running, we do not want to run SELFTEST.
*/
-static bool __read_mostly tracing_selftest_disabled;
+bool __read_mostly tracing_selftest_disabled;
/* For tracers that don't implement custom flags */
static struct tracer_opt dummy_tracer_opt[] = {
@@ -89,7 +86,7 @@
*/
static int tracing_disabled = 1;
-static DEFINE_PER_CPU(local_t, ftrace_cpu_disabled);
+DEFINE_PER_CPU(local_t, ftrace_cpu_disabled);
static inline void ftrace_disable_cpu(void)
{
@@ -172,10 +169,11 @@
static DEFINE_PER_CPU(struct trace_array_cpu, global_trace_cpu);
-int filter_current_check_discard(struct ftrace_event_call *call, void *rec,
+int filter_current_check_discard(struct ring_buffer *buffer,
+ struct ftrace_event_call *call, void *rec,
struct ring_buffer_event *event)
{
- return filter_check_discard(call, rec, global_trace.buffer, event);
+ return filter_check_discard(call, rec, buffer, event);
}
EXPORT_SYMBOL_GPL(filter_current_check_discard);
@@ -266,6 +264,9 @@
TRACE_ITER_ANNOTATE | TRACE_ITER_CONTEXT_INFO | TRACE_ITER_SLEEP_TIME |
TRACE_ITER_GRAPH_TIME;
+static int trace_stop_count;
+static DEFINE_SPINLOCK(tracing_start_lock);
+
/**
* trace_wake_up - wake up tasks waiting for trace input
*
@@ -323,50 +324,20 @@
"printk-msg-only",
"context-info",
"latency-format",
- "global-clock",
"sleep-time",
"graph-time",
NULL
};
-/*
- * ftrace_max_lock is used to protect the swapping of buffers
- * when taking a max snapshot. The buffers themselves are
- * protected by per_cpu spinlocks. But the action of the swap
- * needs its own lock.
- *
- * This is defined as a raw_spinlock_t in order to help
- * with performance when lockdep debugging is enabled.
- */
-static raw_spinlock_t ftrace_max_lock =
- (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+static struct {
+ u64 (*func)(void);
+ const char *name;
+} trace_clocks[] = {
+ { trace_clock_local, "local" },
+ { trace_clock_global, "global" },
+};
-/*
- * Copy the new maximum trace into the separate maximum-trace
- * structure. (this way the maximum trace is permanently saved,
- * for later retrieval via /sys/kernel/debug/tracing/latency_trace)
- */
-static void
-__update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
-{
- struct trace_array_cpu *data = tr->data[cpu];
-
- max_tr.cpu = cpu;
- max_tr.time_start = data->preempt_timestamp;
-
- data = max_tr.data[cpu];
- data->saved_latency = tracing_max_latency;
-
- memcpy(data->comm, tsk->comm, TASK_COMM_LEN);
- data->pid = tsk->pid;
- data->uid = task_uid(tsk);
- data->nice = tsk->static_prio - 20 - MAX_RT_PRIO;
- data->policy = tsk->policy;
- data->rt_priority = tsk->rt_priority;
-
- /* record this tasks comm */
- tracing_record_cmdline(tsk);
-}
+int trace_clock_id;
ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf, size_t cnt)
{
@@ -411,6 +382,56 @@
return cnt;
}
+/*
+ * ftrace_max_lock is used to protect the swapping of buffers
+ * when taking a max snapshot. The buffers themselves are
+ * protected by per_cpu spinlocks. But the action of the swap
+ * needs its own lock.
+ *
+ * This is defined as a raw_spinlock_t in order to help
+ * with performance when lockdep debugging is enabled.
+ *
+ * It is also used in other places outside the update_max_tr
+ * so it needs to be defined outside of the
+ * CONFIG_TRACER_MAX_TRACE.
+ */
+static raw_spinlock_t ftrace_max_lock =
+ (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+
+#ifdef CONFIG_TRACER_MAX_TRACE
+unsigned long __read_mostly tracing_max_latency;
+unsigned long __read_mostly tracing_thresh;
+
+/*
+ * Copy the new maximum trace into the separate maximum-trace
+ * structure. (this way the maximum trace is permanently saved,
+ * for later retrieval via /sys/kernel/debug/tracing/latency_trace)
+ */
+static void
+__update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
+{
+ struct trace_array_cpu *data = tr->data[cpu];
+ struct trace_array_cpu *max_data = tr->data[cpu];
+
+ max_tr.cpu = cpu;
+ max_tr.time_start = data->preempt_timestamp;
+
+ max_data = max_tr.data[cpu];
+ max_data->saved_latency = tracing_max_latency;
+ max_data->critical_start = data->critical_start;
+ max_data->critical_end = data->critical_end;
+
+ memcpy(data->comm, tsk->comm, TASK_COMM_LEN);
+ max_data->pid = tsk->pid;
+ max_data->uid = task_uid(tsk);
+ max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO;
+ max_data->policy = tsk->policy;
+ max_data->rt_priority = tsk->rt_priority;
+
+ /* record this tasks comm */
+ tracing_record_cmdline(tsk);
+}
+
/**
* update_max_tr - snapshot all trace buffers from global_trace to max_tr
* @tr: tracer
@@ -425,16 +446,15 @@
{
struct ring_buffer *buf = tr->buffer;
+ if (trace_stop_count)
+ return;
+
WARN_ON_ONCE(!irqs_disabled());
__raw_spin_lock(&ftrace_max_lock);
tr->buffer = max_tr.buffer;
max_tr.buffer = buf;
- ftrace_disable_cpu();
- ring_buffer_reset(tr->buffer);
- ftrace_enable_cpu();
-
__update_max_tr(tr, tsk, cpu);
__raw_spin_unlock(&ftrace_max_lock);
}
@@ -452,21 +472,35 @@
{
int ret;
+ if (trace_stop_count)
+ return;
+
WARN_ON_ONCE(!irqs_disabled());
__raw_spin_lock(&ftrace_max_lock);
ftrace_disable_cpu();
- ring_buffer_reset(max_tr.buffer);
ret = ring_buffer_swap_cpu(max_tr.buffer, tr->buffer, cpu);
+ if (ret == -EBUSY) {
+ /*
+ * We failed to swap the buffer due to a commit taking
+ * place on this CPU. We fail to record, but we reset
+ * the max trace buffer (no one writes directly to it)
+ * and flag that it failed.
+ */
+ trace_array_printk(&max_tr, _THIS_IP_,
+ "Failed to swap buffers due to commit in progress\n");
+ }
+
ftrace_enable_cpu();
- WARN_ON_ONCE(ret && ret != -EAGAIN);
+ WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY);
__update_max_tr(tr, tsk, cpu);
__raw_spin_unlock(&ftrace_max_lock);
}
+#endif /* CONFIG_TRACER_MAX_TRACE */
/**
* register_tracer - register a tracer with the ftrace system.
@@ -523,7 +557,6 @@
if (type->selftest && !tracing_selftest_disabled) {
struct tracer *saved_tracer = current_trace;
struct trace_array *tr = &global_trace;
- int i;
/*
* Run a selftest on this tracer.
@@ -532,8 +565,7 @@
* internal tracing to verify that everything is in order.
* If we fail, we do not register this tracer.
*/
- for_each_tracing_cpu(i)
- tracing_reset(tr, i);
+ tracing_reset_online_cpus(tr);
current_trace = type;
/* the test is responsible for initializing and enabling */
@@ -546,8 +578,7 @@
goto out;
}
/* Only reset on passing, to avoid touching corrupted buffers */
- for_each_tracing_cpu(i)
- tracing_reset(tr, i);
+ tracing_reset_online_cpus(tr);
printk(KERN_CONT "PASSED\n");
}
@@ -622,21 +653,42 @@
mutex_unlock(&trace_types_lock);
}
-void tracing_reset(struct trace_array *tr, int cpu)
+static void __tracing_reset(struct trace_array *tr, int cpu)
{
ftrace_disable_cpu();
ring_buffer_reset_cpu(tr->buffer, cpu);
ftrace_enable_cpu();
}
+void tracing_reset(struct trace_array *tr, int cpu)
+{
+ struct ring_buffer *buffer = tr->buffer;
+
+ ring_buffer_record_disable(buffer);
+
+ /* Make sure all commits have finished */
+ synchronize_sched();
+ __tracing_reset(tr, cpu);
+
+ ring_buffer_record_enable(buffer);
+}
+
void tracing_reset_online_cpus(struct trace_array *tr)
{
+ struct ring_buffer *buffer = tr->buffer;
int cpu;
+ ring_buffer_record_disable(buffer);
+
+ /* Make sure all commits have finished */
+ synchronize_sched();
+
tr->time_start = ftrace_now(tr->cpu);
for_each_online_cpu(cpu)
- tracing_reset(tr, cpu);
+ __tracing_reset(tr, cpu);
+
+ ring_buffer_record_enable(buffer);
}
void tracing_reset_current(int cpu)
@@ -667,9 +719,6 @@
cmdline_idx = 0;
}
-static int trace_stop_count;
-static DEFINE_SPINLOCK(tracing_start_lock);
-
/**
* ftrace_off_permanent - disable all ftrace code permanently
*
@@ -850,14 +899,15 @@
}
EXPORT_SYMBOL_GPL(tracing_generic_entry_update);
-struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
- int type,
- unsigned long len,
- unsigned long flags, int pc)
+struct ring_buffer_event *
+trace_buffer_lock_reserve(struct ring_buffer *buffer,
+ int type,
+ unsigned long len,
+ unsigned long flags, int pc)
{
struct ring_buffer_event *event;
- event = ring_buffer_lock_reserve(tr->buffer, len);
+ event = ring_buffer_lock_reserve(buffer, len);
if (event != NULL) {
struct trace_entry *ent = ring_buffer_event_data(event);
@@ -867,58 +917,60 @@
return event;
}
-static void ftrace_trace_stack(struct trace_array *tr,
- unsigned long flags, int skip, int pc);
-static void ftrace_trace_userstack(struct trace_array *tr,
- unsigned long flags, int pc);
-static inline void __trace_buffer_unlock_commit(struct trace_array *tr,
- struct ring_buffer_event *event,
- unsigned long flags, int pc,
- int wake)
+static inline void
+__trace_buffer_unlock_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event,
+ unsigned long flags, int pc,
+ int wake)
{
- ring_buffer_unlock_commit(tr->buffer, event);
+ ring_buffer_unlock_commit(buffer, event);
- ftrace_trace_stack(tr, flags, 6, pc);
- ftrace_trace_userstack(tr, flags, pc);
+ ftrace_trace_stack(buffer, flags, 6, pc);
+ ftrace_trace_userstack(buffer, flags, pc);
if (wake)
trace_wake_up();
}
-void trace_buffer_unlock_commit(struct trace_array *tr,
- struct ring_buffer_event *event,
- unsigned long flags, int pc)
+void trace_buffer_unlock_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event,
+ unsigned long flags, int pc)
{
- __trace_buffer_unlock_commit(tr, event, flags, pc, 1);
+ __trace_buffer_unlock_commit(buffer, event, flags, pc, 1);
}
struct ring_buffer_event *
-trace_current_buffer_lock_reserve(int type, unsigned long len,
+trace_current_buffer_lock_reserve(struct ring_buffer **current_rb,
+ int type, unsigned long len,
unsigned long flags, int pc)
{
- return trace_buffer_lock_reserve(&global_trace,
+ *current_rb = global_trace.buffer;
+ return trace_buffer_lock_reserve(*current_rb,
type, len, flags, pc);
}
EXPORT_SYMBOL_GPL(trace_current_buffer_lock_reserve);
-void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
+void trace_current_buffer_unlock_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event,
unsigned long flags, int pc)
{
- __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 1);
+ __trace_buffer_unlock_commit(buffer, event, flags, pc, 1);
}
EXPORT_SYMBOL_GPL(trace_current_buffer_unlock_commit);
-void trace_nowake_buffer_unlock_commit(struct ring_buffer_event *event,
- unsigned long flags, int pc)
+void trace_nowake_buffer_unlock_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event,
+ unsigned long flags, int pc)
{
- __trace_buffer_unlock_commit(&global_trace, event, flags, pc, 0);
+ __trace_buffer_unlock_commit(buffer, event, flags, pc, 0);
}
EXPORT_SYMBOL_GPL(trace_nowake_buffer_unlock_commit);
-void trace_current_buffer_discard_commit(struct ring_buffer_event *event)
+void trace_current_buffer_discard_commit(struct ring_buffer *buffer,
+ struct ring_buffer_event *event)
{
- ring_buffer_discard_commit(global_trace.buffer, event);
+ ring_buffer_discard_commit(buffer, event);
}
EXPORT_SYMBOL_GPL(trace_current_buffer_discard_commit);
@@ -928,6 +980,7 @@
int pc)
{
struct ftrace_event_call *call = &event_function;
+ struct ring_buffer *buffer = tr->buffer;
struct ring_buffer_event *event;
struct ftrace_entry *entry;
@@ -935,7 +988,7 @@
if (unlikely(local_read(&__get_cpu_var(ftrace_cpu_disabled))))
return;
- event = trace_buffer_lock_reserve(tr, TRACE_FN, sizeof(*entry),
+ event = trace_buffer_lock_reserve(buffer, TRACE_FN, sizeof(*entry),
flags, pc);
if (!event)
return;
@@ -943,58 +996,10 @@
entry->ip = ip;
entry->parent_ip = parent_ip;
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
}
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static int __trace_graph_entry(struct trace_array *tr,
- struct ftrace_graph_ent *trace,
- unsigned long flags,
- int pc)
-{
- struct ftrace_event_call *call = &event_funcgraph_entry;
- struct ring_buffer_event *event;
- struct ftrace_graph_ent_entry *entry;
-
- if (unlikely(local_read(&__get_cpu_var(ftrace_cpu_disabled))))
- return 0;
-
- event = trace_buffer_lock_reserve(&global_trace, TRACE_GRAPH_ENT,
- sizeof(*entry), flags, pc);
- if (!event)
- return 0;
- entry = ring_buffer_event_data(event);
- entry->graph_ent = *trace;
- if (!filter_current_check_discard(call, entry, event))
- ring_buffer_unlock_commit(global_trace.buffer, event);
-
- return 1;
-}
-
-static void __trace_graph_return(struct trace_array *tr,
- struct ftrace_graph_ret *trace,
- unsigned long flags,
- int pc)
-{
- struct ftrace_event_call *call = &event_funcgraph_exit;
- struct ring_buffer_event *event;
- struct ftrace_graph_ret_entry *entry;
-
- if (unlikely(local_read(&__get_cpu_var(ftrace_cpu_disabled))))
- return;
-
- event = trace_buffer_lock_reserve(&global_trace, TRACE_GRAPH_RET,
- sizeof(*entry), flags, pc);
- if (!event)
- return;
- entry = ring_buffer_event_data(event);
- entry->ret = *trace;
- if (!filter_current_check_discard(call, entry, event))
- ring_buffer_unlock_commit(global_trace.buffer, event);
-}
-#endif
-
void
ftrace(struct trace_array *tr, struct trace_array_cpu *data,
unsigned long ip, unsigned long parent_ip, unsigned long flags,
@@ -1004,17 +1009,17 @@
trace_function(tr, ip, parent_ip, flags, pc);
}
-static void __ftrace_trace_stack(struct trace_array *tr,
+#ifdef CONFIG_STACKTRACE
+static void __ftrace_trace_stack(struct ring_buffer *buffer,
unsigned long flags,
int skip, int pc)
{
-#ifdef CONFIG_STACKTRACE
struct ftrace_event_call *call = &event_kernel_stack;
struct ring_buffer_event *event;
struct stack_entry *entry;
struct stack_trace trace;
- event = trace_buffer_lock_reserve(tr, TRACE_STACK,
+ event = trace_buffer_lock_reserve(buffer, TRACE_STACK,
sizeof(*entry), flags, pc);
if (!event)
return;
@@ -1027,32 +1032,28 @@
trace.entries = entry->caller;
save_stack_trace(&trace);
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
-#endif
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
}
-static void ftrace_trace_stack(struct trace_array *tr,
- unsigned long flags,
- int skip, int pc)
+void ftrace_trace_stack(struct ring_buffer *buffer, unsigned long flags,
+ int skip, int pc)
{
if (!(trace_flags & TRACE_ITER_STACKTRACE))
return;
- __ftrace_trace_stack(tr, flags, skip, pc);
+ __ftrace_trace_stack(buffer, flags, skip, pc);
}
-void __trace_stack(struct trace_array *tr,
- unsigned long flags,
- int skip, int pc)
+void __trace_stack(struct trace_array *tr, unsigned long flags, int skip,
+ int pc)
{
- __ftrace_trace_stack(tr, flags, skip, pc);
+ __ftrace_trace_stack(tr->buffer, flags, skip, pc);
}
-static void ftrace_trace_userstack(struct trace_array *tr,
- unsigned long flags, int pc)
+void
+ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
{
-#ifdef CONFIG_STACKTRACE
struct ftrace_event_call *call = &event_user_stack;
struct ring_buffer_event *event;
struct userstack_entry *entry;
@@ -1061,7 +1062,7 @@
if (!(trace_flags & TRACE_ITER_USERSTACKTRACE))
return;
- event = trace_buffer_lock_reserve(tr, TRACE_USER_STACK,
+ event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
sizeof(*entry), flags, pc);
if (!event)
return;
@@ -1075,9 +1076,8 @@
trace.entries = entry->caller;
save_stack_trace_user(&trace);
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
-#endif
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
}
#ifdef UNUSED
@@ -1087,6 +1087,8 @@
}
#endif /* UNUSED */
+#endif /* CONFIG_STACKTRACE */
+
static void
ftrace_trace_special(void *__tr,
unsigned long arg1, unsigned long arg2, unsigned long arg3,
@@ -1094,9 +1096,10 @@
{
struct ring_buffer_event *event;
struct trace_array *tr = __tr;
+ struct ring_buffer *buffer = tr->buffer;
struct special_entry *entry;
- event = trace_buffer_lock_reserve(tr, TRACE_SPECIAL,
+ event = trace_buffer_lock_reserve(buffer, TRACE_SPECIAL,
sizeof(*entry), 0, pc);
if (!event)
return;
@@ -1104,7 +1107,7 @@
entry->arg1 = arg1;
entry->arg2 = arg2;
entry->arg3 = arg3;
- trace_buffer_unlock_commit(tr, event, 0, pc);
+ trace_buffer_unlock_commit(buffer, event, 0, pc);
}
void
@@ -1115,62 +1118,6 @@
}
void
-tracing_sched_switch_trace(struct trace_array *tr,
- struct task_struct *prev,
- struct task_struct *next,
- unsigned long flags, int pc)
-{
- struct ftrace_event_call *call = &event_context_switch;
- struct ring_buffer_event *event;
- struct ctx_switch_entry *entry;
-
- event = trace_buffer_lock_reserve(tr, TRACE_CTX,
- sizeof(*entry), flags, pc);
- if (!event)
- return;
- entry = ring_buffer_event_data(event);
- entry->prev_pid = prev->pid;
- entry->prev_prio = prev->prio;
- entry->prev_state = prev->state;
- entry->next_pid = next->pid;
- entry->next_prio = next->prio;
- entry->next_state = next->state;
- entry->next_cpu = task_cpu(next);
-
- if (!filter_check_discard(call, entry, tr->buffer, event))
- trace_buffer_unlock_commit(tr, event, flags, pc);
-}
-
-void
-tracing_sched_wakeup_trace(struct trace_array *tr,
- struct task_struct *wakee,
- struct task_struct *curr,
- unsigned long flags, int pc)
-{
- struct ftrace_event_call *call = &event_wakeup;
- struct ring_buffer_event *event;
- struct ctx_switch_entry *entry;
-
- event = trace_buffer_lock_reserve(tr, TRACE_WAKE,
- sizeof(*entry), flags, pc);
- if (!event)
- return;
- entry = ring_buffer_event_data(event);
- entry->prev_pid = curr->pid;
- entry->prev_prio = curr->prio;
- entry->prev_state = curr->state;
- entry->next_pid = wakee->pid;
- entry->next_prio = wakee->prio;
- entry->next_state = wakee->state;
- entry->next_cpu = task_cpu(wakee);
-
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
- ftrace_trace_stack(tr, flags, 6, pc);
- ftrace_trace_userstack(tr, flags, pc);
-}
-
-void
ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3)
{
struct trace_array *tr = &global_trace;
@@ -1194,68 +1141,6 @@
local_irq_restore(flags);
}
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-int trace_graph_entry(struct ftrace_graph_ent *trace)
-{
- struct trace_array *tr = &global_trace;
- struct trace_array_cpu *data;
- unsigned long flags;
- long disabled;
- int ret;
- int cpu;
- int pc;
-
- if (!ftrace_trace_task(current))
- return 0;
-
- if (!ftrace_graph_addr(trace->func))
- return 0;
-
- local_irq_save(flags);
- cpu = raw_smp_processor_id();
- data = tr->data[cpu];
- disabled = atomic_inc_return(&data->disabled);
- if (likely(disabled == 1)) {
- pc = preempt_count();
- ret = __trace_graph_entry(tr, trace, flags, pc);
- } else {
- ret = 0;
- }
- /* Only do the atomic if it is not already set */
- if (!test_tsk_trace_graph(current))
- set_tsk_trace_graph(current);
-
- atomic_dec(&data->disabled);
- local_irq_restore(flags);
-
- return ret;
-}
-
-void trace_graph_return(struct ftrace_graph_ret *trace)
-{
- struct trace_array *tr = &global_trace;
- struct trace_array_cpu *data;
- unsigned long flags;
- long disabled;
- int cpu;
- int pc;
-
- local_irq_save(flags);
- cpu = raw_smp_processor_id();
- data = tr->data[cpu];
- disabled = atomic_inc_return(&data->disabled);
- if (likely(disabled == 1)) {
- pc = preempt_count();
- __trace_graph_return(tr, trace, flags, pc);
- }
- if (!trace->depth)
- clear_tsk_trace_graph(current);
- atomic_dec(&data->disabled);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-
/**
* trace_vbprintk - write binary msg to tracing buffer
*
@@ -1268,6 +1153,7 @@
struct ftrace_event_call *call = &event_bprint;
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
struct trace_array *tr = &global_trace;
struct trace_array_cpu *data;
struct bprint_entry *entry;
@@ -1300,7 +1186,9 @@
goto out_unlock;
size = sizeof(*entry) + sizeof(u32) * len;
- event = trace_buffer_lock_reserve(tr, TRACE_BPRINT, size, flags, pc);
+ buffer = tr->buffer;
+ event = trace_buffer_lock_reserve(buffer, TRACE_BPRINT, size,
+ flags, pc);
if (!event)
goto out_unlock;
entry = ring_buffer_event_data(event);
@@ -1308,8 +1196,8 @@
entry->fmt = fmt;
memcpy(entry->buf, trace_buf, sizeof(u32) * len);
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
out_unlock:
__raw_spin_unlock(&trace_buf_lock);
@@ -1324,14 +1212,30 @@
}
EXPORT_SYMBOL_GPL(trace_vbprintk);
-int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
+int trace_array_printk(struct trace_array *tr,
+ unsigned long ip, const char *fmt, ...)
+{
+ int ret;
+ va_list ap;
+
+ if (!(trace_flags & TRACE_ITER_PRINTK))
+ return 0;
+
+ va_start(ap, fmt);
+ ret = trace_array_vprintk(tr, ip, fmt, ap);
+ va_end(ap);
+ return ret;
+}
+
+int trace_array_vprintk(struct trace_array *tr,
+ unsigned long ip, const char *fmt, va_list args)
{
static raw_spinlock_t trace_buf_lock = __RAW_SPIN_LOCK_UNLOCKED;
static char trace_buf[TRACE_BUF_SIZE];
struct ftrace_event_call *call = &event_print;
struct ring_buffer_event *event;
- struct trace_array *tr = &global_trace;
+ struct ring_buffer *buffer;
struct trace_array_cpu *data;
int cpu, len = 0, size, pc;
struct print_entry *entry;
@@ -1359,7 +1263,9 @@
trace_buf[len] = 0;
size = sizeof(*entry) + len + 1;
- event = trace_buffer_lock_reserve(tr, TRACE_PRINT, size, irq_flags, pc);
+ buffer = tr->buffer;
+ event = trace_buffer_lock_reserve(buffer, TRACE_PRINT, size,
+ irq_flags, pc);
if (!event)
goto out_unlock;
entry = ring_buffer_event_data(event);
@@ -1367,8 +1273,8 @@
memcpy(&entry->buf, trace_buf, len);
entry->buf[len] = 0;
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
out_unlock:
__raw_spin_unlock(&trace_buf_lock);
@@ -1380,6 +1286,11 @@
return len;
}
+
+int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
+{
+ return trace_array_printk(&global_trace, ip, fmt, args);
+}
EXPORT_SYMBOL_GPL(trace_vprintk);
enum trace_file_type {
@@ -1519,6 +1430,37 @@
return ent;
}
+static void tracing_iter_reset(struct trace_iterator *iter, int cpu)
+{
+ struct trace_array *tr = iter->tr;
+ struct ring_buffer_event *event;
+ struct ring_buffer_iter *buf_iter;
+ unsigned long entries = 0;
+ u64 ts;
+
+ tr->data[cpu]->skipped_entries = 0;
+
+ if (!iter->buffer_iter[cpu])
+ return;
+
+ buf_iter = iter->buffer_iter[cpu];
+ ring_buffer_iter_reset(buf_iter);
+
+ /*
+ * We could have the case with the max latency tracers
+ * that a reset never took place on a cpu. This is evident
+ * by the timestamp being before the start of the buffer.
+ */
+ while ((event = ring_buffer_iter_peek(buf_iter, &ts))) {
+ if (ts >= iter->tr->time_start)
+ break;
+ entries++;
+ ring_buffer_read(buf_iter, NULL);
+ }
+
+ tr->data[cpu]->skipped_entries = entries;
+}
+
/*
* No necessary locking here. The worst thing which can
* happen is loosing events consumed at the same time
@@ -1557,10 +1499,9 @@
if (cpu_file == TRACE_PIPE_ALL_CPU) {
for_each_tracing_cpu(cpu)
- ring_buffer_iter_reset(iter->buffer_iter[cpu]);
+ tracing_iter_reset(iter, cpu);
} else
- ring_buffer_iter_reset(iter->buffer_iter[cpu_file]);
-
+ tracing_iter_reset(iter, cpu_file);
ftrace_enable_cpu();
@@ -1609,16 +1550,32 @@
struct trace_array *tr = iter->tr;
struct trace_array_cpu *data = tr->data[tr->cpu];
struct tracer *type = current_trace;
- unsigned long total;
- unsigned long entries;
+ unsigned long entries = 0;
+ unsigned long total = 0;
+ unsigned long count;
const char *name = "preemption";
+ int cpu;
if (type)
name = type->name;
- entries = ring_buffer_entries(iter->tr->buffer);
- total = entries +
- ring_buffer_overruns(iter->tr->buffer);
+
+ for_each_tracing_cpu(cpu) {
+ count = ring_buffer_entries_cpu(tr->buffer, cpu);
+ /*
+ * If this buffer has skipped entries, then we hold all
+ * entries for the trace and we need to ignore the
+ * ones before the time stamp.
+ */
+ if (tr->data[cpu]->skipped_entries) {
+ count -= tr->data[cpu]->skipped_entries;
+ /* total is the same as the entries */
+ total += count;
+ } else
+ total += count +
+ ring_buffer_overrun_cpu(tr->buffer, cpu);
+ entries += count;
+ }
seq_printf(m, "# %s latency trace v1.1.5 on %s\n",
name, UTS_RELEASE);
@@ -1660,7 +1617,7 @@
seq_puts(m, "\n# => ended at: ");
seq_print_ip_sym(&iter->seq, data->critical_end, sym_flags);
trace_print_seq(m, &iter->seq);
- seq_puts(m, "#\n");
+ seq_puts(m, "\n#\n");
}
seq_puts(m, "#\n");
@@ -1679,6 +1636,9 @@
if (cpumask_test_cpu(iter->cpu, iter->started))
return;
+ if (iter->tr->data[iter->cpu]->skipped_entries)
+ return;
+
cpumask_set_cpu(iter->cpu, iter->started);
/* Don't print started cpu buffer for the first entry of the trace */
@@ -1941,19 +1901,23 @@
if (ring_buffer_overruns(iter->tr->buffer))
iter->iter_flags |= TRACE_FILE_ANNOTATE;
+ /* stop the trace while dumping */
+ tracing_stop();
+
if (iter->cpu_file == TRACE_PIPE_ALL_CPU) {
for_each_tracing_cpu(cpu) {
iter->buffer_iter[cpu] =
ring_buffer_read_start(iter->tr->buffer, cpu);
+ tracing_iter_reset(iter, cpu);
}
} else {
cpu = iter->cpu_file;
iter->buffer_iter[cpu] =
ring_buffer_read_start(iter->tr->buffer, cpu);
+ tracing_iter_reset(iter, cpu);
}
- /* TODO stop tracer */
ret = seq_open(file, &tracer_seq_ops);
if (ret < 0) {
fail_ret = ERR_PTR(ret);
@@ -1963,9 +1927,6 @@
m = file->private_data;
m->private = iter;
- /* stop the trace while dumping */
- tracing_stop();
-
mutex_unlock(&trace_types_lock);
return iter;
@@ -1976,6 +1937,7 @@
ring_buffer_read_finish(iter->buffer_iter[cpu]);
}
free_cpumask_var(iter->started);
+ tracing_start();
fail:
mutex_unlock(&trace_types_lock);
kfree(iter->trace);
@@ -2257,8 +2219,8 @@
len += 3; /* "no" and newline */
}
- /* +2 for \n and \0 */
- buf = kmalloc(len + 2, GFP_KERNEL);
+ /* +1 for \0 */
+ buf = kmalloc(len + 1, GFP_KERNEL);
if (!buf) {
mutex_unlock(&trace_types_lock);
return -ENOMEM;
@@ -2281,7 +2243,7 @@
}
mutex_unlock(&trace_types_lock);
- WARN_ON(r >= len + 2);
+ WARN_ON(r >= len + 1);
r = simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
@@ -2292,23 +2254,23 @@
/* Try to assign a tracer specific option */
static int set_tracer_option(struct tracer *trace, char *cmp, int neg)
{
- struct tracer_flags *trace_flags = trace->flags;
+ struct tracer_flags *tracer_flags = trace->flags;
struct tracer_opt *opts = NULL;
int ret = 0, i = 0;
int len;
- for (i = 0; trace_flags->opts[i].name; i++) {
- opts = &trace_flags->opts[i];
+ for (i = 0; tracer_flags->opts[i].name; i++) {
+ opts = &tracer_flags->opts[i];
len = strlen(opts->name);
if (strncmp(cmp, opts->name, len) == 0) {
- ret = trace->set_flag(trace_flags->val,
+ ret = trace->set_flag(tracer_flags->val,
opts->bit, !neg);
break;
}
}
/* Not found */
- if (!trace_flags->opts[i].name)
+ if (!tracer_flags->opts[i].name)
return -EINVAL;
/* Refused to handle */
@@ -2316,9 +2278,9 @@
return ret;
if (neg)
- trace_flags->val &= ~opts->bit;
+ tracer_flags->val &= ~opts->bit;
else
- trace_flags->val |= opts->bit;
+ tracer_flags->val |= opts->bit;
return 0;
}
@@ -2333,22 +2295,6 @@
trace_flags |= mask;
else
trace_flags &= ~mask;
-
- if (mask == TRACE_ITER_GLOBAL_CLK) {
- u64 (*func)(void);
-
- if (enabled)
- func = trace_clock_global;
- else
- func = trace_clock_local;
-
- mutex_lock(&trace_types_lock);
- ring_buffer_set_clock(global_trace.buffer, func);
-
- if (max_tr.buffer)
- ring_buffer_set_clock(max_tr.buffer, func);
- mutex_unlock(&trace_types_lock);
- }
}
static ssize_t
@@ -3316,6 +3262,62 @@
return cnt;
}
+static ssize_t tracing_clock_read(struct file *filp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ char buf[64];
+ int bufiter = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(trace_clocks); i++)
+ bufiter += snprintf(buf + bufiter, sizeof(buf) - bufiter,
+ "%s%s%s%s", i ? " " : "",
+ i == trace_clock_id ? "[" : "", trace_clocks[i].name,
+ i == trace_clock_id ? "]" : "");
+ bufiter += snprintf(buf + bufiter, sizeof(buf) - bufiter, "\n");
+
+ return simple_read_from_buffer(ubuf, cnt, ppos, buf, bufiter);
+}
+
+static ssize_t tracing_clock_write(struct file *filp, const char __user *ubuf,
+ size_t cnt, loff_t *fpos)
+{
+ char buf[64];
+ const char *clockstr;
+ int i;
+
+ if (cnt >= sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, cnt))
+ return -EFAULT;
+
+ buf[cnt] = 0;
+
+ clockstr = strstrip(buf);
+
+ for (i = 0; i < ARRAY_SIZE(trace_clocks); i++) {
+ if (strcmp(trace_clocks[i].name, clockstr) == 0)
+ break;
+ }
+ if (i == ARRAY_SIZE(trace_clocks))
+ return -EINVAL;
+
+ trace_clock_id = i;
+
+ mutex_lock(&trace_types_lock);
+
+ ring_buffer_set_clock(global_trace.buffer, trace_clocks[i].func);
+ if (max_tr.buffer)
+ ring_buffer_set_clock(max_tr.buffer, trace_clocks[i].func);
+
+ mutex_unlock(&trace_types_lock);
+
+ *fpos += cnt;
+
+ return cnt;
+}
+
static const struct file_operations tracing_max_lat_fops = {
.open = tracing_open_generic,
.read = tracing_max_lat_read,
@@ -3353,6 +3355,12 @@
.write = tracing_mark_write,
};
+static const struct file_operations trace_clock_fops = {
+ .open = tracing_open_generic,
+ .read = tracing_clock_read,
+ .write = tracing_clock_write,
+};
+
struct ftrace_buffer_info {
struct trace_array *tr;
void *spare;
@@ -3633,9 +3641,6 @@
cnt = ring_buffer_commit_overrun_cpu(tr->buffer, cpu);
trace_seq_printf(s, "commit overrun: %ld\n", cnt);
- cnt = ring_buffer_nmi_dropped_cpu(tr->buffer, cpu);
- trace_seq_printf(s, "nmi dropped: %ld\n", cnt);
-
count = simple_read_from_buffer(ubuf, count, ppos, s->buffer, s->len);
kfree(s);
@@ -3896,17 +3901,9 @@
if (ret < 0)
return ret;
- switch (val) {
- case 0:
- trace_flags &= ~(1 << index);
- break;
- case 1:
- trace_flags |= 1 << index;
- break;
-
- default:
+ if (val != 0 && val != 1)
return -EINVAL;
- }
+ set_tracer_flags(1 << index, val);
*ppos += cnt;
@@ -4074,11 +4071,13 @@
trace_create_file("current_tracer", 0644, d_tracer,
&global_trace, &set_tracer_fops);
+#ifdef CONFIG_TRACER_MAX_TRACE
trace_create_file("tracing_max_latency", 0644, d_tracer,
&tracing_max_latency, &tracing_max_lat_fops);
trace_create_file("tracing_thresh", 0644, d_tracer,
&tracing_thresh, &tracing_max_lat_fops);
+#endif
trace_create_file("README", 0444, d_tracer,
NULL, &tracing_readme_fops);
@@ -4095,6 +4094,9 @@
trace_create_file("saved_cmdlines", 0444, d_tracer,
NULL, &tracing_saved_cmdlines_fops);
+ trace_create_file("trace_clock", 0644, d_tracer, NULL,
+ &trace_clock_fops);
+
#ifdef CONFIG_DYNAMIC_FTRACE
trace_create_file("dyn_ftrace_total_info", 0444, d_tracer,
&ftrace_update_tot_cnt, &tracing_dyn_info_fops);
@@ -4273,7 +4275,6 @@
__init static int tracer_alloc_buffers(void)
{
- struct trace_array_cpu *data;
int ring_buf_size;
int i;
int ret = -ENOMEM;
@@ -4323,7 +4324,7 @@
/* Allocate the first page for all buffers */
for_each_tracing_cpu(i) {
- data = global_trace.data[i] = &per_cpu(global_trace_cpu, i);
+ global_trace.data[i] = &per_cpu(global_trace_cpu, i);
max_tr.data[i] = &per_cpu(max_data, i);
}
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 8b9f4f6..fa1dccb 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -34,8 +34,6 @@
TRACE_GRAPH_ENT,
TRACE_USER_STACK,
TRACE_HW_BRANCHES,
- TRACE_SYSCALL_ENTER,
- TRACE_SYSCALL_EXIT,
TRACE_KMEM_ALLOC,
TRACE_KMEM_FREE,
TRACE_POWER,
@@ -236,9 +234,6 @@
atomic_t disabled;
void *buffer_page; /* ring buffer spare */
- /* these fields get copied into max-trace: */
- unsigned long trace_idx;
- unsigned long overrun;
unsigned long saved_latency;
unsigned long critical_start;
unsigned long critical_end;
@@ -246,6 +241,7 @@
unsigned long nice;
unsigned long policy;
unsigned long rt_priority;
+ unsigned long skipped_entries;
cycle_t preempt_timestamp;
pid_t pid;
uid_t uid;
@@ -319,10 +315,6 @@
TRACE_KMEM_ALLOC); \
IF_ASSIGN(var, ent, struct kmemtrace_free_entry, \
TRACE_KMEM_FREE); \
- IF_ASSIGN(var, ent, struct syscall_trace_enter, \
- TRACE_SYSCALL_ENTER); \
- IF_ASSIGN(var, ent, struct syscall_trace_exit, \
- TRACE_SYSCALL_EXIT); \
__ftrace_bad_type(); \
} while (0)
@@ -423,12 +415,13 @@
struct ring_buffer_event;
-struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
- int type,
- unsigned long len,
- unsigned long flags,
- int pc);
-void trace_buffer_unlock_commit(struct trace_array *tr,
+struct ring_buffer_event *
+trace_buffer_lock_reserve(struct ring_buffer *buffer,
+ int type,
+ unsigned long len,
+ unsigned long flags,
+ int pc);
+void trace_buffer_unlock_commit(struct ring_buffer *buffer,
struct ring_buffer_event *event,
unsigned long flags, int pc);
@@ -467,6 +460,7 @@
void trace_graph_return(struct ftrace_graph_ret *trace);
int trace_graph_entry(struct ftrace_graph_ent *trace);
+void set_graph_array(struct trace_array *tr);
void tracing_start_cmdline_record(void);
void tracing_stop_cmdline_record(void);
@@ -478,16 +472,40 @@
extern unsigned long nsecs_to_usecs(unsigned long nsecs);
+#ifdef CONFIG_TRACER_MAX_TRACE
extern unsigned long tracing_max_latency;
extern unsigned long tracing_thresh;
void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu);
void update_max_tr_single(struct trace_array *tr,
struct task_struct *tsk, int cpu);
+#endif /* CONFIG_TRACER_MAX_TRACE */
-void __trace_stack(struct trace_array *tr,
- unsigned long flags,
- int skip, int pc);
+#ifdef CONFIG_STACKTRACE
+void ftrace_trace_stack(struct ring_buffer *buffer, unsigned long flags,
+ int skip, int pc);
+
+void ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags,
+ int pc);
+
+void __trace_stack(struct trace_array *tr, unsigned long flags, int skip,
+ int pc);
+#else
+static inline void ftrace_trace_stack(struct trace_array *tr,
+ unsigned long flags, int skip, int pc)
+{
+}
+
+static inline void ftrace_trace_userstack(struct trace_array *tr,
+ unsigned long flags, int pc)
+{
+}
+
+static inline void __trace_stack(struct trace_array *tr, unsigned long flags,
+ int skip, int pc)
+{
+}
+#endif /* CONFIG_STACKTRACE */
extern cycle_t ftrace_now(int cpu);
@@ -513,6 +531,10 @@
extern int DYN_FTRACE_TEST_NAME(void);
#endif
+extern int ring_buffer_expanded;
+extern bool tracing_selftest_disabled;
+DECLARE_PER_CPU(local_t, ftrace_cpu_disabled);
+
#ifdef CONFIG_FTRACE_STARTUP_TEST
extern int trace_selftest_startup_function(struct tracer *trace,
struct trace_array *tr);
@@ -544,9 +566,16 @@
trace_vbprintk(unsigned long ip, const char *fmt, va_list args);
extern int
trace_vprintk(unsigned long ip, const char *fmt, va_list args);
+extern int
+trace_array_vprintk(struct trace_array *tr,
+ unsigned long ip, const char *fmt, va_list args);
+int trace_array_printk(struct trace_array *tr,
+ unsigned long ip, const char *fmt, ...);
extern unsigned long trace_flags;
+extern int trace_clock_id;
+
/* Standard output formatting function used for function return traces */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern enum print_line_t print_graph_function(struct trace_iterator *iter);
@@ -635,9 +664,8 @@
TRACE_ITER_PRINTK_MSGONLY = 0x10000,
TRACE_ITER_CONTEXT_INFO = 0x20000, /* Print pid/cpu/time */
TRACE_ITER_LATENCY_FMT = 0x40000,
- TRACE_ITER_GLOBAL_CLK = 0x80000,
- TRACE_ITER_SLEEP_TIME = 0x100000,
- TRACE_ITER_GRAPH_TIME = 0x200000,
+ TRACE_ITER_SLEEP_TIME = 0x80000,
+ TRACE_ITER_GRAPH_TIME = 0x100000,
};
/*
@@ -734,6 +762,7 @@
struct list_head link;
char *name;
char *type;
+ int filter_type;
int offset;
int size;
int is_signed;
@@ -743,13 +772,15 @@
int n_preds;
struct filter_pred **preds;
char *filter_string;
+ bool no_reset;
};
struct event_subsystem {
struct list_head list;
const char *name;
struct dentry *entry;
- void *filter;
+ struct event_filter *filter;
+ int nr_events;
};
struct filter_pred;
@@ -777,6 +808,7 @@
char *filter_string);
extern void print_subsystem_event_filter(struct event_subsystem *system,
struct trace_seq *s);
+extern int filter_assign_type(const char *type);
static inline int
filter_check_discard(struct ftrace_event_call *call, void *rec,
diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c
index a29ef23..19bfc75 100644
--- a/kernel/trace/trace_boot.c
+++ b/kernel/trace/trace_boot.c
@@ -41,14 +41,12 @@
static int boot_trace_init(struct trace_array *tr)
{
- int cpu;
boot_trace = tr;
if (!tr)
return 0;
- for_each_cpu(cpu, cpu_possible_mask)
- tracing_reset(tr, cpu);
+ tracing_reset_online_cpus(tr);
tracing_sched_switch_assign_trace(tr);
return 0;
@@ -132,6 +130,7 @@
void trace_boot_call(struct boot_trace_call *bt, initcall_t fn)
{
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
struct trace_boot_call *entry;
struct trace_array *tr = boot_trace;
@@ -144,13 +143,14 @@
sprint_symbol(bt->func, (unsigned long)fn);
preempt_disable();
- event = trace_buffer_lock_reserve(tr, TRACE_BOOT_CALL,
+ buffer = tr->buffer;
+ event = trace_buffer_lock_reserve(buffer, TRACE_BOOT_CALL,
sizeof(*entry), 0, 0);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
entry->boot_call = *bt;
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ trace_buffer_unlock_commit(buffer, event, 0, 0);
out:
preempt_enable();
}
@@ -158,6 +158,7 @@
void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn)
{
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
struct trace_boot_ret *entry;
struct trace_array *tr = boot_trace;
@@ -167,13 +168,14 @@
sprint_symbol(bt->func, (unsigned long)fn);
preempt_disable();
- event = trace_buffer_lock_reserve(tr, TRACE_BOOT_RET,
+ buffer = tr->buffer;
+ event = trace_buffer_lock_reserve(buffer, TRACE_BOOT_RET,
sizeof(*entry), 0, 0);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
entry->boot_ret = *bt;
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ trace_buffer_unlock_commit(buffer, event, 0, 0);
out:
preempt_enable();
}
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index e75276a..78b1ed2 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -17,6 +17,8 @@
#include <linux/ctype.h>
#include <linux/delay.h>
+#include <asm/setup.h>
+
#include "trace_output.h"
#define TRACE_SYSTEM "TRACE_SYSTEM"
@@ -25,8 +27,9 @@
LIST_HEAD(ftrace_events);
-int trace_define_field(struct ftrace_event_call *call, char *type,
- char *name, int offset, int size, int is_signed)
+int trace_define_field(struct ftrace_event_call *call, const char *type,
+ const char *name, int offset, int size, int is_signed,
+ int filter_type)
{
struct ftrace_event_field *field;
@@ -42,9 +45,15 @@
if (!field->type)
goto err;
+ if (filter_type == FILTER_OTHER)
+ field->filter_type = filter_assign_type(type);
+ else
+ field->filter_type = filter_type;
+
field->offset = offset;
field->size = size;
field->is_signed = is_signed;
+
list_add(&field->link, &call->fields);
return 0;
@@ -60,6 +69,29 @@
}
EXPORT_SYMBOL_GPL(trace_define_field);
+#define __common_field(type, item) \
+ ret = trace_define_field(call, #type, "common_" #item, \
+ offsetof(typeof(ent), item), \
+ sizeof(ent.item), \
+ is_signed_type(type), FILTER_OTHER); \
+ if (ret) \
+ return ret;
+
+int trace_define_common_fields(struct ftrace_event_call *call)
+{
+ int ret;
+ struct trace_entry ent;
+
+ __common_field(unsigned short, type);
+ __common_field(unsigned char, flags);
+ __common_field(unsigned char, preempt_count);
+ __common_field(int, pid);
+ __common_field(int, tgid);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(trace_define_common_fields);
+
#ifdef CONFIG_MODULES
static void trace_destroy_fields(struct ftrace_event_call *call)
@@ -84,14 +116,14 @@
if (call->enabled) {
call->enabled = 0;
tracing_stop_cmdline_record();
- call->unregfunc();
+ call->unregfunc(call->data);
}
break;
case 1:
if (!call->enabled) {
call->enabled = 1;
tracing_start_cmdline_record();
- call->regfunc();
+ call->regfunc(call->data);
}
break;
}
@@ -574,7 +606,7 @@
trace_seq_printf(s, "format:\n");
trace_write_header(s);
- r = call->show_format(s);
+ r = call->show_format(call, s);
if (!r) {
/*
* ug! The format output is bigger than a PAGE!!
@@ -849,8 +881,10 @@
/* First see if we did not already create this dir */
list_for_each_entry(system, &event_subsystems, list) {
- if (strcmp(system->name, name) == 0)
+ if (strcmp(system->name, name) == 0) {
+ system->nr_events++;
return system->entry;
+ }
}
/* need to create new entry */
@@ -869,6 +903,7 @@
return d_events;
}
+ system->nr_events = 1;
system->name = kstrdup(name, GFP_KERNEL);
if (!system->name) {
debugfs_remove(system->entry);
@@ -920,15 +955,6 @@
if (strcmp(call->system, TRACE_SYSTEM) != 0)
d_events = event_subsystem_dir(call->system, d_events);
- if (call->raw_init) {
- ret = call->raw_init();
- if (ret < 0) {
- pr_warning("Could not initialize trace point"
- " events/%s\n", call->name);
- return ret;
- }
- }
-
call->dir = debugfs_create_dir(call->name, d_events);
if (!call->dir) {
pr_warning("Could not create debugfs "
@@ -945,7 +971,7 @@
id);
if (call->define_fields) {
- ret = call->define_fields();
+ ret = call->define_fields(call);
if (ret < 0) {
pr_warning("Could not initialize trace point"
" events/%s\n", call->name);
@@ -987,6 +1013,32 @@
struct file_operations filter;
};
+static void remove_subsystem_dir(const char *name)
+{
+ struct event_subsystem *system;
+
+ if (strcmp(name, TRACE_SYSTEM) == 0)
+ return;
+
+ list_for_each_entry(system, &event_subsystems, list) {
+ if (strcmp(system->name, name) == 0) {
+ if (!--system->nr_events) {
+ struct event_filter *filter = system->filter;
+
+ debugfs_remove_recursive(system->entry);
+ list_del(&system->list);
+ if (filter) {
+ kfree(filter->filter_string);
+ kfree(filter);
+ }
+ kfree(system->name);
+ kfree(system);
+ }
+ break;
+ }
+ }
+}
+
static struct ftrace_module_file_ops *
trace_create_file_ops(struct module *mod)
{
@@ -1027,6 +1079,7 @@
struct ftrace_module_file_ops *file_ops = NULL;
struct ftrace_event_call *call, *start, *end;
struct dentry *d_events;
+ int ret;
start = mod->trace_events;
end = mod->trace_events + mod->num_trace_events;
@@ -1042,7 +1095,15 @@
/* The linker may leave blanks */
if (!call->name)
continue;
-
+ if (call->raw_init) {
+ ret = call->raw_init();
+ if (ret < 0) {
+ if (ret != -ENOSYS)
+ pr_warning("Could not initialize trace "
+ "point events/%s\n", call->name);
+ continue;
+ }
+ }
/*
* This module has events, create file ops for this module
* if not already done.
@@ -1077,6 +1138,7 @@
list_del(&call->list);
trace_destroy_fields(call);
destroy_preds(call);
+ remove_subsystem_dir(call->system);
}
}
@@ -1133,6 +1195,18 @@
extern struct ftrace_event_call __start_ftrace_events[];
extern struct ftrace_event_call __stop_ftrace_events[];
+static char bootup_event_buf[COMMAND_LINE_SIZE] __initdata;
+
+static __init int setup_trace_event(char *str)
+{
+ strlcpy(bootup_event_buf, str, COMMAND_LINE_SIZE);
+ ring_buffer_expanded = 1;
+ tracing_selftest_disabled = 1;
+
+ return 1;
+}
+__setup("trace_event=", setup_trace_event);
+
static __init int event_trace_init(void)
{
struct ftrace_event_call *call;
@@ -1140,6 +1214,8 @@
struct dentry *entry;
struct dentry *d_events;
int ret;
+ char *buf = bootup_event_buf;
+ char *token;
d_tracer = tracing_init_dentry();
if (!d_tracer)
@@ -1179,12 +1255,34 @@
/* The linker may leave blanks */
if (!call->name)
continue;
+ if (call->raw_init) {
+ ret = call->raw_init();
+ if (ret < 0) {
+ if (ret != -ENOSYS)
+ pr_warning("Could not initialize trace "
+ "point events/%s\n", call->name);
+ continue;
+ }
+ }
list_add(&call->list, &ftrace_events);
event_create_dir(call, d_events, &ftrace_event_id_fops,
&ftrace_enable_fops, &ftrace_event_filter_fops,
&ftrace_event_format_fops);
}
+ while (true) {
+ token = strsep(&buf, ",");
+
+ if (!token)
+ break;
+ if (!*token)
+ continue;
+
+ ret = ftrace_set_clr_event(token, 1);
+ if (ret)
+ pr_warning("Failed to enable trace event: %s\n", token);
+ }
+
ret = register_module_notifier(&trace_module_nb);
if (ret)
pr_warning("Failed to register trace events module notifier\n");
@@ -1340,6 +1438,7 @@
function_test_events_call(unsigned long ip, unsigned long parent_ip)
{
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
struct ftrace_entry *entry;
unsigned long flags;
long disabled;
@@ -1357,7 +1456,8 @@
local_save_flags(flags);
- event = trace_current_buffer_lock_reserve(TRACE_FN, sizeof(*entry),
+ event = trace_current_buffer_lock_reserve(&buffer,
+ TRACE_FN, sizeof(*entry),
flags, pc);
if (!event)
goto out;
@@ -1365,7 +1465,7 @@
entry->ip = ip;
entry->parent_ip = parent_ip;
- trace_nowake_buffer_unlock_commit(event, flags, pc);
+ trace_nowake_buffer_unlock_commit(buffer, event, flags, pc);
out:
atomic_dec(&per_cpu(test_event_disable, cpu));
@@ -1392,10 +1492,10 @@
static __init int event_trace_self_tests_init(void)
{
-
- event_trace_self_tests();
-
- event_trace_self_test_with_function();
+ if (!tracing_selftest_disabled) {
+ event_trace_self_tests();
+ event_trace_self_test_with_function();
+ }
return 0;
}
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index f32dc9d..93660fb 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -163,6 +163,20 @@
return match;
}
+/* Filter predicate for char * pointers */
+static int filter_pred_pchar(struct filter_pred *pred, void *event,
+ int val1, int val2)
+{
+ char **addr = (char **)(event + pred->offset);
+ int cmp, match;
+
+ cmp = strncmp(*addr, pred->str_val, pred->str_len);
+
+ match = (!cmp) ^ pred->not;
+
+ return match;
+}
+
/*
* Filter predicate for dynamic sized arrays of characters.
* These are implemented through a list of strings at the end
@@ -176,11 +190,13 @@
static int filter_pred_strloc(struct filter_pred *pred, void *event,
int val1, int val2)
{
- unsigned short str_loc = *(unsigned short *)(event + pred->offset);
+ u32 str_item = *(u32 *)(event + pred->offset);
+ int str_loc = str_item & 0xffff;
+ int str_len = str_item >> 16;
char *addr = (char *)(event + str_loc);
int cmp, match;
- cmp = strncmp(addr, pred->str_val, pred->str_len);
+ cmp = strncmp(addr, pred->str_val, str_len);
match = (!cmp) ^ pred->not;
@@ -293,7 +309,7 @@
struct event_filter *filter = call->filter;
mutex_lock(&event_mutex);
- if (filter->filter_string)
+ if (filter && filter->filter_string)
trace_seq_printf(s, "%s\n", filter->filter_string);
else
trace_seq_printf(s, "none\n");
@@ -306,7 +322,7 @@
struct event_filter *filter = system->filter;
mutex_lock(&event_mutex);
- if (filter->filter_string)
+ if (filter && filter->filter_string)
trace_seq_printf(s, "%s\n", filter->filter_string);
else
trace_seq_printf(s, "none\n");
@@ -374,6 +390,9 @@
struct event_filter *filter = call->filter;
int i;
+ if (!filter)
+ return;
+
for (i = 0; i < MAX_FILTER_PRED; i++) {
if (filter->preds[i])
filter_free_pred(filter->preds[i]);
@@ -384,17 +403,19 @@
call->filter = NULL;
}
-int init_preds(struct ftrace_event_call *call)
+static int init_preds(struct ftrace_event_call *call)
{
struct event_filter *filter;
struct filter_pred *pred;
int i;
+ if (call->filter)
+ return 0;
+
filter = call->filter = kzalloc(sizeof(*filter), GFP_KERNEL);
if (!call->filter)
return -ENOMEM;
- call->filter_active = 0;
filter->n_preds = 0;
filter->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred), GFP_KERNEL);
@@ -416,30 +437,55 @@
return -ENOMEM;
}
-EXPORT_SYMBOL_GPL(init_preds);
-static void filter_free_subsystem_preds(struct event_subsystem *system)
+static int init_subsystem_preds(struct event_subsystem *system)
{
- struct event_filter *filter = system->filter;
struct ftrace_event_call *call;
- int i;
-
- if (filter->n_preds) {
- for (i = 0; i < filter->n_preds; i++)
- filter_free_pred(filter->preds[i]);
- kfree(filter->preds);
- filter->preds = NULL;
- filter->n_preds = 0;
- }
+ int err;
list_for_each_entry(call, &ftrace_events, list) {
if (!call->define_fields)
continue;
- if (!strcmp(call->system, system->name)) {
- filter_disable_preds(call);
- remove_filter_string(call->filter);
+ if (strcmp(call->system, system->name) != 0)
+ continue;
+
+ err = init_preds(call);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+enum {
+ FILTER_DISABLE_ALL,
+ FILTER_INIT_NO_RESET,
+ FILTER_SKIP_NO_RESET,
+};
+
+static void filter_free_subsystem_preds(struct event_subsystem *system,
+ int flag)
+{
+ struct ftrace_event_call *call;
+
+ list_for_each_entry(call, &ftrace_events, list) {
+ if (!call->define_fields)
+ continue;
+
+ if (strcmp(call->system, system->name) != 0)
+ continue;
+
+ if (flag == FILTER_INIT_NO_RESET) {
+ call->filter->no_reset = false;
+ continue;
}
+
+ if (flag == FILTER_SKIP_NO_RESET && call->filter->no_reset)
+ continue;
+
+ filter_disable_preds(call);
+ remove_filter_string(call->filter);
}
}
@@ -468,12 +514,7 @@
return 0;
}
-enum {
- FILTER_STATIC_STRING = 1,
- FILTER_DYN_STRING
-};
-
-static int is_string_field(const char *type)
+int filter_assign_type(const char *type)
{
if (strstr(type, "__data_loc") && strstr(type, "char"))
return FILTER_DYN_STRING;
@@ -481,12 +522,19 @@
if (strchr(type, '[') && strstr(type, "char"))
return FILTER_STATIC_STRING;
- return 0;
+ return FILTER_OTHER;
+}
+
+static bool is_string_field(struct ftrace_event_field *field)
+{
+ return field->filter_type == FILTER_DYN_STRING ||
+ field->filter_type == FILTER_STATIC_STRING ||
+ field->filter_type == FILTER_PTR_STRING;
}
static int is_legal_op(struct ftrace_event_field *field, int op)
{
- if (is_string_field(field->type) && (op != OP_EQ && op != OP_NE))
+ if (is_string_field(field) && (op != OP_EQ && op != OP_NE))
return 0;
return 1;
@@ -537,22 +585,24 @@
static int filter_add_pred(struct filter_parse_state *ps,
struct ftrace_event_call *call,
- struct filter_pred *pred)
+ struct filter_pred *pred,
+ bool dry_run)
{
struct ftrace_event_field *field;
filter_pred_fn_t fn;
unsigned long long val;
- int string_type;
int ret;
pred->fn = filter_pred_none;
if (pred->op == OP_AND) {
pred->pop_n = 2;
- return filter_add_pred_fn(ps, call, pred, filter_pred_and);
+ fn = filter_pred_and;
+ goto add_pred_fn;
} else if (pred->op == OP_OR) {
pred->pop_n = 2;
- return filter_add_pred_fn(ps, call, pred, filter_pred_or);
+ fn = filter_pred_or;
+ goto add_pred_fn;
}
field = find_event_field(call, pred->field_name);
@@ -568,16 +618,17 @@
return -EINVAL;
}
- string_type = is_string_field(field->type);
- if (string_type) {
- if (string_type == FILTER_STATIC_STRING)
- fn = filter_pred_string;
- else
- fn = filter_pred_strloc;
+ if (is_string_field(field)) {
pred->str_len = field->size;
- if (pred->op == OP_NE)
- pred->not = 1;
- return filter_add_pred_fn(ps, call, pred, fn);
+
+ if (field->filter_type == FILTER_STATIC_STRING)
+ fn = filter_pred_string;
+ else if (field->filter_type == FILTER_DYN_STRING)
+ fn = filter_pred_strloc;
+ else {
+ fn = filter_pred_pchar;
+ pred->str_len = strlen(pred->str_val);
+ }
} else {
if (field->is_signed)
ret = strict_strtoll(pred->str_val, 0, &val);
@@ -588,41 +639,33 @@
return -EINVAL;
}
pred->val = val;
- }
- fn = select_comparison_fn(pred->op, field->size, field->is_signed);
- if (!fn) {
- parse_error(ps, FILT_ERR_INVALID_OP, 0);
- return -EINVAL;
+ fn = select_comparison_fn(pred->op, field->size,
+ field->is_signed);
+ if (!fn) {
+ parse_error(ps, FILT_ERR_INVALID_OP, 0);
+ return -EINVAL;
+ }
}
if (pred->op == OP_NE)
pred->not = 1;
- return filter_add_pred_fn(ps, call, pred, fn);
+add_pred_fn:
+ if (!dry_run)
+ return filter_add_pred_fn(ps, call, pred, fn);
+ return 0;
}
static int filter_add_subsystem_pred(struct filter_parse_state *ps,
struct event_subsystem *system,
struct filter_pred *pred,
- char *filter_string)
+ char *filter_string,
+ bool dry_run)
{
- struct event_filter *filter = system->filter;
struct ftrace_event_call *call;
int err = 0;
-
- if (!filter->preds) {
- filter->preds = kzalloc(MAX_FILTER_PRED * sizeof(pred),
- GFP_KERNEL);
-
- if (!filter->preds)
- return -ENOMEM;
- }
-
- if (filter->n_preds == MAX_FILTER_PRED) {
- parse_error(ps, FILT_ERR_TOO_MANY_PREDS, 0);
- return -ENOSPC;
- }
+ bool fail = true;
list_for_each_entry(call, &ftrace_events, list) {
@@ -632,19 +675,24 @@
if (strcmp(call->system, system->name))
continue;
- err = filter_add_pred(ps, call, pred);
- if (err) {
- filter_free_subsystem_preds(system);
- parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
- goto out;
- }
- replace_filter_string(call->filter, filter_string);
+ if (call->filter->no_reset)
+ continue;
+
+ err = filter_add_pred(ps, call, pred, dry_run);
+ if (err)
+ call->filter->no_reset = true;
+ else
+ fail = false;
+
+ if (!dry_run)
+ replace_filter_string(call->filter, filter_string);
}
- filter->preds[filter->n_preds] = pred;
- filter->n_preds++;
-out:
- return err;
+ if (fail) {
+ parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
+ return err;
+ }
+ return 0;
}
static void parse_init(struct filter_parse_state *ps,
@@ -1003,12 +1051,14 @@
static int replace_preds(struct event_subsystem *system,
struct ftrace_event_call *call,
struct filter_parse_state *ps,
- char *filter_string)
+ char *filter_string,
+ bool dry_run)
{
char *operand1 = NULL, *operand2 = NULL;
struct filter_pred *pred;
struct postfix_elt *elt;
int err;
+ int n_preds = 0;
err = check_preds(ps);
if (err)
@@ -1027,24 +1077,14 @@
continue;
}
+ if (n_preds++ == MAX_FILTER_PRED) {
+ parse_error(ps, FILT_ERR_TOO_MANY_PREDS, 0);
+ return -ENOSPC;
+ }
+
if (elt->op == OP_AND || elt->op == OP_OR) {
pred = create_logical_pred(elt->op);
- if (!pred)
- return -ENOMEM;
- if (call) {
- err = filter_add_pred(ps, call, pred);
- filter_free_pred(pred);
- } else {
- err = filter_add_subsystem_pred(ps, system,
- pred, filter_string);
- if (err)
- filter_free_pred(pred);
- }
- if (err)
- return err;
-
- operand1 = operand2 = NULL;
- continue;
+ goto add_pred;
}
if (!operand1 || !operand2) {
@@ -1053,17 +1093,15 @@
}
pred = create_pred(elt->op, operand1, operand2);
+add_pred:
if (!pred)
return -ENOMEM;
- if (call) {
- err = filter_add_pred(ps, call, pred);
- filter_free_pred(pred);
- } else {
+ if (call)
+ err = filter_add_pred(ps, call, pred, false);
+ else
err = filter_add_subsystem_pred(ps, system, pred,
- filter_string);
- if (err)
- filter_free_pred(pred);
- }
+ filter_string, dry_run);
+ filter_free_pred(pred);
if (err)
return err;
@@ -1081,6 +1119,10 @@
mutex_lock(&event_mutex);
+ err = init_preds(call);
+ if (err)
+ goto out_unlock;
+
if (!strcmp(strstrip(filter_string), "0")) {
filter_disable_preds(call);
remove_filter_string(call->filter);
@@ -1103,7 +1145,7 @@
goto out;
}
- err = replace_preds(NULL, call, ps, filter_string);
+ err = replace_preds(NULL, call, ps, filter_string, false);
if (err)
append_filter_err(ps, call->filter);
@@ -1126,8 +1168,12 @@
mutex_lock(&event_mutex);
+ err = init_subsystem_preds(system);
+ if (err)
+ goto out_unlock;
+
if (!strcmp(strstrip(filter_string), "0")) {
- filter_free_subsystem_preds(system);
+ filter_free_subsystem_preds(system, FILTER_DISABLE_ALL);
remove_filter_string(system->filter);
mutex_unlock(&event_mutex);
return 0;
@@ -1138,7 +1184,6 @@
if (!ps)
goto out_unlock;
- filter_free_subsystem_preds(system);
replace_filter_string(system->filter, filter_string);
parse_init(ps, filter_ops, filter_string);
@@ -1148,9 +1193,23 @@
goto out;
}
- err = replace_preds(system, NULL, ps, filter_string);
- if (err)
+ filter_free_subsystem_preds(system, FILTER_INIT_NO_RESET);
+
+ /* try to see the filter can be applied to which events */
+ err = replace_preds(system, NULL, ps, filter_string, true);
+ if (err) {
append_filter_err(ps, system->filter);
+ goto out;
+ }
+
+ filter_free_subsystem_preds(system, FILTER_SKIP_NO_RESET);
+
+ /* really apply the filter to the events */
+ err = replace_preds(system, NULL, ps, filter_string, false);
+ if (err) {
+ append_filter_err(ps, system->filter);
+ filter_free_subsystem_preds(system, 2);
+ }
out:
filter_opstack_clear(ps);
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index d06cf89..df1bf6e 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -60,7 +60,8 @@
#undef TRACE_EVENT_FORMAT
#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt) \
static int \
-ftrace_format_##call(struct trace_seq *s) \
+ftrace_format_##call(struct ftrace_event_call *unused, \
+ struct trace_seq *s) \
{ \
struct args field; \
int ret; \
@@ -76,7 +77,8 @@
#define TRACE_EVENT_FORMAT_NOFILTER(call, proto, args, fmt, tstruct, \
tpfmt) \
static int \
-ftrace_format_##call(struct trace_seq *s) \
+ftrace_format_##call(struct ftrace_event_call *unused, \
+ struct trace_seq *s) \
{ \
struct args field; \
int ret; \
@@ -117,7 +119,7 @@
#undef TRACE_EVENT_FORMAT
#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt) \
-int ftrace_define_fields_##call(void); \
+int ftrace_define_fields_##call(struct ftrace_event_call *event_call); \
static int ftrace_raw_init_event_##call(void); \
\
struct ftrace_event_call __used \
@@ -133,7 +135,6 @@
static int ftrace_raw_init_event_##call(void) \
{ \
INIT_LIST_HEAD(&event_##call.fields); \
- init_preds(&event_##call); \
return 0; \
} \
@@ -156,7 +157,8 @@
#define TRACE_FIELD(type, item, assign) \
ret = trace_define_field(event_call, #type, #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), is_signed_type(type)); \
+ sizeof(field.item), \
+ is_signed_type(type), FILTER_OTHER); \
if (ret) \
return ret;
@@ -164,7 +166,7 @@
#define TRACE_FIELD_SPECIAL(type, item, len, cmd) \
ret = trace_define_field(event_call, #type "[" #len "]", #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), 0); \
+ sizeof(field.item), 0, FILTER_OTHER); \
if (ret) \
return ret;
@@ -172,7 +174,8 @@
#define TRACE_FIELD_SIGN(type, item, assign, is_signed) \
ret = trace_define_field(event_call, #type, #item, \
offsetof(typeof(field), item), \
- sizeof(field.item), is_signed); \
+ sizeof(field.item), is_signed, \
+ FILTER_OTHER); \
if (ret) \
return ret;
@@ -182,17 +185,14 @@
#undef TRACE_EVENT_FORMAT
#define TRACE_EVENT_FORMAT(call, proto, args, fmt, tstruct, tpfmt) \
int \
-ftrace_define_fields_##call(void) \
+ftrace_define_fields_##call(struct ftrace_event_call *event_call) \
{ \
- struct ftrace_event_call *event_call = &event_##call; \
struct args field; \
int ret; \
\
- __common_field(unsigned char, type, 0); \
- __common_field(unsigned char, flags, 0); \
- __common_field(unsigned char, preempt_count, 0); \
- __common_field(int, pid, 1); \
- __common_field(int, tgid, 1); \
+ ret = trace_define_common_fields(event_call); \
+ if (ret) \
+ return ret; \
\
tstruct; \
\
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 75ef000..5b01b94 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -288,11 +288,9 @@
ftrace_trace_onoff_print(struct seq_file *m, unsigned long ip,
struct ftrace_probe_ops *ops, void *data)
{
- char str[KSYM_SYMBOL_LEN];
long count = (long)data;
- kallsyms_lookup(ip, NULL, NULL, NULL, str);
- seq_printf(m, "%s:", str);
+ seq_printf(m, "%pf:", (void *)ip);
if (ops == &traceon_probe_ops)
seq_printf(m, "traceon");
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 420ec348..b3749a2 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -52,7 +52,7 @@
.opts = trace_opts
};
-/* pid on the last trace processed */
+static struct trace_array *graph_array;
/* Add a function return address to the trace stack on thread info.*/
@@ -166,10 +166,123 @@
return ret;
}
+static int __trace_graph_entry(struct trace_array *tr,
+ struct ftrace_graph_ent *trace,
+ unsigned long flags,
+ int pc)
+{
+ struct ftrace_event_call *call = &event_funcgraph_entry;
+ struct ring_buffer_event *event;
+ struct ring_buffer *buffer = tr->buffer;
+ struct ftrace_graph_ent_entry *entry;
+
+ if (unlikely(local_read(&__get_cpu_var(ftrace_cpu_disabled))))
+ return 0;
+
+ event = trace_buffer_lock_reserve(buffer, TRACE_GRAPH_ENT,
+ sizeof(*entry), flags, pc);
+ if (!event)
+ return 0;
+ entry = ring_buffer_event_data(event);
+ entry->graph_ent = *trace;
+ if (!filter_current_check_discard(buffer, call, entry, event))
+ ring_buffer_unlock_commit(buffer, event);
+
+ return 1;
+}
+
+int trace_graph_entry(struct ftrace_graph_ent *trace)
+{
+ struct trace_array *tr = graph_array;
+ struct trace_array_cpu *data;
+ unsigned long flags;
+ long disabled;
+ int ret;
+ int cpu;
+ int pc;
+
+ if (unlikely(!tr))
+ return 0;
+
+ if (!ftrace_trace_task(current))
+ return 0;
+
+ if (!ftrace_graph_addr(trace->func))
+ return 0;
+
+ local_irq_save(flags);
+ cpu = raw_smp_processor_id();
+ data = tr->data[cpu];
+ disabled = atomic_inc_return(&data->disabled);
+ if (likely(disabled == 1)) {
+ pc = preempt_count();
+ ret = __trace_graph_entry(tr, trace, flags, pc);
+ } else {
+ ret = 0;
+ }
+ /* Only do the atomic if it is not already set */
+ if (!test_tsk_trace_graph(current))
+ set_tsk_trace_graph(current);
+
+ atomic_dec(&data->disabled);
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+static void __trace_graph_return(struct trace_array *tr,
+ struct ftrace_graph_ret *trace,
+ unsigned long flags,
+ int pc)
+{
+ struct ftrace_event_call *call = &event_funcgraph_exit;
+ struct ring_buffer_event *event;
+ struct ring_buffer *buffer = tr->buffer;
+ struct ftrace_graph_ret_entry *entry;
+
+ if (unlikely(local_read(&__get_cpu_var(ftrace_cpu_disabled))))
+ return;
+
+ event = trace_buffer_lock_reserve(buffer, TRACE_GRAPH_RET,
+ sizeof(*entry), flags, pc);
+ if (!event)
+ return;
+ entry = ring_buffer_event_data(event);
+ entry->ret = *trace;
+ if (!filter_current_check_discard(buffer, call, entry, event))
+ ring_buffer_unlock_commit(buffer, event);
+}
+
+void trace_graph_return(struct ftrace_graph_ret *trace)
+{
+ struct trace_array *tr = graph_array;
+ struct trace_array_cpu *data;
+ unsigned long flags;
+ long disabled;
+ int cpu;
+ int pc;
+
+ local_irq_save(flags);
+ cpu = raw_smp_processor_id();
+ data = tr->data[cpu];
+ disabled = atomic_inc_return(&data->disabled);
+ if (likely(disabled == 1)) {
+ pc = preempt_count();
+ __trace_graph_return(tr, trace, flags, pc);
+ }
+ if (!trace->depth)
+ clear_tsk_trace_graph(current);
+ atomic_dec(&data->disabled);
+ local_irq_restore(flags);
+}
+
static int graph_trace_init(struct trace_array *tr)
{
- int ret = register_ftrace_graph(&trace_graph_return,
- &trace_graph_entry);
+ int ret;
+
+ graph_array = tr;
+ ret = register_ftrace_graph(&trace_graph_return,
+ &trace_graph_entry);
if (ret)
return ret;
tracing_start_cmdline_record();
@@ -177,49 +290,30 @@
return 0;
}
+void set_graph_array(struct trace_array *tr)
+{
+ graph_array = tr;
+}
+
static void graph_trace_reset(struct trace_array *tr)
{
tracing_stop_cmdline_record();
unregister_ftrace_graph();
}
-static inline int log10_cpu(int nb)
-{
- if (nb / 100)
- return 3;
- if (nb / 10)
- return 2;
- return 1;
-}
+static int max_bytes_for_cpu;
static enum print_line_t
print_graph_cpu(struct trace_seq *s, int cpu)
{
- int i;
int ret;
- int log10_this = log10_cpu(cpu);
- int log10_all = log10_cpu(cpumask_weight(cpu_online_mask));
-
/*
* Start with a space character - to make it stand out
* to the right a bit when trace output is pasted into
* email:
*/
- ret = trace_seq_printf(s, " ");
-
- /*
- * Tricky - we space the CPU field according to the max
- * number of online CPUs. On a 2-cpu system it would take
- * a maximum of 1 digit - on a 128 cpu system it would
- * take up to 3 digits:
- */
- for (i = 0; i < log10_all - log10_this; i++) {
- ret = trace_seq_printf(s, " ");
- if (!ret)
- return TRACE_TYPE_PARTIAL_LINE;
- }
- ret = trace_seq_printf(s, "%d) ", cpu);
+ ret = trace_seq_printf(s, " %*d) ", max_bytes_for_cpu, cpu);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
@@ -565,11 +659,7 @@
return TRACE_TYPE_PARTIAL_LINE;
}
- ret = seq_print_ip_sym(s, call->func, 0);
- if (!ret)
- return TRACE_TYPE_PARTIAL_LINE;
-
- ret = trace_seq_printf(s, "();\n");
+ ret = trace_seq_printf(s, "%pf();\n", (void *)call->func);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
@@ -612,11 +702,7 @@
return TRACE_TYPE_PARTIAL_LINE;
}
- ret = seq_print_ip_sym(s, call->func, 0);
- if (!ret)
- return TRACE_TYPE_PARTIAL_LINE;
-
- ret = trace_seq_printf(s, "() {\n");
+ ret = trace_seq_printf(s, "%pf() {\n", (void *)call->func);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
@@ -934,6 +1020,8 @@
static __init int init_graph_trace(void)
{
+ max_bytes_for_cpu = snprintf(NULL, 0, "%d", nr_cpu_ids - 1);
+
return register_tracer(&graph_trace);
}
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index b923d13..5555b75 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -178,7 +178,6 @@
out:
data->critical_sequence = max_sequence;
data->preempt_timestamp = ftrace_now(cpu);
- tracing_reset(tr, cpu);
trace_function(tr, CALLER_ADDR0, parent_ip, flags, pc);
}
@@ -208,7 +207,6 @@
data->critical_sequence = max_sequence;
data->preempt_timestamp = ftrace_now(cpu);
data->critical_start = parent_ip ? : ip;
- tracing_reset(tr, cpu);
local_save_flags(flags);
@@ -379,6 +377,7 @@
irqsoff_trace = tr;
/* make sure that the tracer is visible */
smp_wmb();
+ tracing_reset_online_cpus(tr);
start_irqsoff_tracer(tr);
}
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index d53b45e..c4c9bbd 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -307,11 +307,12 @@
struct trace_array_cpu *data,
struct mmiotrace_rw *rw)
{
+ struct ring_buffer *buffer = tr->buffer;
struct ring_buffer_event *event;
struct trace_mmiotrace_rw *entry;
int pc = preempt_count();
- event = trace_buffer_lock_reserve(tr, TRACE_MMIO_RW,
+ event = trace_buffer_lock_reserve(buffer, TRACE_MMIO_RW,
sizeof(*entry), 0, pc);
if (!event) {
atomic_inc(&dropped_count);
@@ -319,7 +320,7 @@
}
entry = ring_buffer_event_data(event);
entry->rw = *rw;
- trace_buffer_unlock_commit(tr, event, 0, pc);
+ trace_buffer_unlock_commit(buffer, event, 0, pc);
}
void mmio_trace_rw(struct mmiotrace_rw *rw)
@@ -333,11 +334,12 @@
struct trace_array_cpu *data,
struct mmiotrace_map *map)
{
+ struct ring_buffer *buffer = tr->buffer;
struct ring_buffer_event *event;
struct trace_mmiotrace_map *entry;
int pc = preempt_count();
- event = trace_buffer_lock_reserve(tr, TRACE_MMIO_MAP,
+ event = trace_buffer_lock_reserve(buffer, TRACE_MMIO_MAP,
sizeof(*entry), 0, pc);
if (!event) {
atomic_inc(&dropped_count);
@@ -345,7 +347,7 @@
}
entry = ring_buffer_event_data(event);
entry->map = *map;
- trace_buffer_unlock_commit(tr, event, 0, pc);
+ trace_buffer_unlock_commit(buffer, event, 0, pc);
}
void mmio_trace_mapping(struct mmiotrace_map *map)
diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
index 8a30d98..fe1a00f 100644
--- a/kernel/trace/trace_power.c
+++ b/kernel/trace/trace_power.c
@@ -38,6 +38,7 @@
{
struct ftrace_event_call *call = &event_power;
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
struct trace_power *entry;
struct trace_array_cpu *data;
struct trace_array *tr = power_trace;
@@ -45,18 +46,20 @@
if (!trace_power_enabled)
return;
+ buffer = tr->buffer;
+
preempt_disable();
it->end = ktime_get();
data = tr->data[smp_processor_id()];
- event = trace_buffer_lock_reserve(tr, TRACE_POWER,
+ event = trace_buffer_lock_reserve(buffer, TRACE_POWER,
sizeof(*entry), 0, 0);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
entry->state_data = *it;
- if (!filter_check_discard(call, entry, tr->buffer, event))
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ if (!filter_check_discard(call, entry, buffer, event))
+ trace_buffer_unlock_commit(buffer, event, 0, 0);
out:
preempt_enable();
}
@@ -66,6 +69,7 @@
{
struct ftrace_event_call *call = &event_power;
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
struct trace_power *entry;
struct trace_array_cpu *data;
struct trace_array *tr = power_trace;
@@ -73,6 +77,8 @@
if (!trace_power_enabled)
return;
+ buffer = tr->buffer;
+
memset(it, 0, sizeof(struct power_trace));
it->state = level;
it->type = type;
@@ -81,14 +87,14 @@
it->end = it->stamp;
data = tr->data[smp_processor_id()];
- event = trace_buffer_lock_reserve(tr, TRACE_POWER,
+ event = trace_buffer_lock_reserve(buffer, TRACE_POWER,
sizeof(*entry), 0, 0);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
entry->state_data = *it;
- if (!filter_check_discard(call, entry, tr->buffer, event))
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ if (!filter_check_discard(call, entry, buffer, event))
+ trace_buffer_unlock_commit(buffer, event, 0, 0);
out:
preempt_enable();
}
@@ -144,14 +150,12 @@
static int power_trace_init(struct trace_array *tr)
{
- int cpu;
power_trace = tr;
trace_power_enabled = 1;
tracing_power_register();
- for_each_cpu(cpu, cpu_possible_mask)
- tracing_reset(tr, cpu);
+ tracing_reset_online_cpus(tr);
return 0;
}
diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c
index a98106d..5fca0f5 100644
--- a/kernel/trace/trace_sched_switch.c
+++ b/kernel/trace/trace_sched_switch.c
@@ -20,6 +20,35 @@
static DEFINE_MUTEX(sched_register_mutex);
static int sched_stopped;
+
+void
+tracing_sched_switch_trace(struct trace_array *tr,
+ struct task_struct *prev,
+ struct task_struct *next,
+ unsigned long flags, int pc)
+{
+ struct ftrace_event_call *call = &event_context_switch;
+ struct ring_buffer *buffer = tr->buffer;
+ struct ring_buffer_event *event;
+ struct ctx_switch_entry *entry;
+
+ event = trace_buffer_lock_reserve(buffer, TRACE_CTX,
+ sizeof(*entry), flags, pc);
+ if (!event)
+ return;
+ entry = ring_buffer_event_data(event);
+ entry->prev_pid = prev->pid;
+ entry->prev_prio = prev->prio;
+ entry->prev_state = prev->state;
+ entry->next_pid = next->pid;
+ entry->next_prio = next->prio;
+ entry->next_state = next->state;
+ entry->next_cpu = task_cpu(next);
+
+ if (!filter_check_discard(call, entry, buffer, event))
+ trace_buffer_unlock_commit(buffer, event, flags, pc);
+}
+
static void
probe_sched_switch(struct rq *__rq, struct task_struct *prev,
struct task_struct *next)
@@ -49,6 +78,36 @@
local_irq_restore(flags);
}
+void
+tracing_sched_wakeup_trace(struct trace_array *tr,
+ struct task_struct *wakee,
+ struct task_struct *curr,
+ unsigned long flags, int pc)
+{
+ struct ftrace_event_call *call = &event_wakeup;
+ struct ring_buffer_event *event;
+ struct ctx_switch_entry *entry;
+ struct ring_buffer *buffer = tr->buffer;
+
+ event = trace_buffer_lock_reserve(buffer, TRACE_WAKE,
+ sizeof(*entry), flags, pc);
+ if (!event)
+ return;
+ entry = ring_buffer_event_data(event);
+ entry->prev_pid = curr->pid;
+ entry->prev_prio = curr->prio;
+ entry->prev_state = curr->state;
+ entry->next_pid = wakee->pid;
+ entry->next_prio = wakee->prio;
+ entry->next_state = wakee->state;
+ entry->next_cpu = task_cpu(wakee);
+
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
+ ftrace_trace_stack(tr->buffer, flags, 6, pc);
+ ftrace_trace_userstack(tr->buffer, flags, pc);
+}
+
static void
probe_sched_wakeup(struct rq *__rq, struct task_struct *wakee, int success)
{
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index eacb272..ad69f10 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -186,11 +186,6 @@
static void __wakeup_reset(struct trace_array *tr)
{
- int cpu;
-
- for_each_possible_cpu(cpu)
- tracing_reset(tr, cpu);
-
wakeup_cpu = -1;
wakeup_prio = -1;
@@ -204,6 +199,8 @@
{
unsigned long flags;
+ tracing_reset_online_cpus(tr);
+
local_irq_save(flags);
__raw_spin_lock(&wakeup_lock);
__wakeup_reset(tr);
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 00dd648..d2cdbab 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -288,6 +288,7 @@
* to detect and recover from possible hangs
*/
tracing_reset_online_cpus(tr);
+ set_graph_array(tr);
ret = register_ftrace_graph(&trace_graph_return,
&trace_graph_entry_watchdog);
if (ret) {
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 6a2a9d4..0f6facb 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -186,43 +186,33 @@
};
static void *
-t_next(struct seq_file *m, void *v, loff_t *pos)
+__next(struct seq_file *m, loff_t *pos)
{
- long i;
+ long n = *pos - 1;
- (*pos)++;
-
- if (v == SEQ_START_TOKEN)
- i = 0;
- else {
- i = *(long *)v;
- i++;
- }
-
- if (i >= max_stack_trace.nr_entries ||
- stack_dump_trace[i] == ULONG_MAX)
+ if (n >= max_stack_trace.nr_entries || stack_dump_trace[n] == ULONG_MAX)
return NULL;
- m->private = (void *)i;
-
+ m->private = (void *)n;
return &m->private;
}
+static void *
+t_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return __next(m, pos);
+}
+
static void *t_start(struct seq_file *m, loff_t *pos)
{
- void *t = SEQ_START_TOKEN;
- loff_t l = 0;
-
local_irq_disable();
__raw_spin_lock(&max_stack_lock);
if (*pos == 0)
return SEQ_START_TOKEN;
- for (; t && l < *pos; t = t_next(m, t, &l))
- ;
-
- return t;
+ return __next(m, pos);
}
static void t_stop(struct seq_file *m, void *p)
@@ -234,15 +224,8 @@
static int trace_lookup_stack(struct seq_file *m, long i)
{
unsigned long addr = stack_dump_trace[i];
-#ifdef CONFIG_KALLSYMS
- char str[KSYM_SYMBOL_LEN];
- sprint_symbol(str, addr);
-
- return seq_printf(m, "%s\n", str);
-#else
- return seq_printf(m, "%p\n", (void*)addr);
-#endif
+ return seq_printf(m, "%pF\n", (void *)addr);
}
static void print_disabled(struct seq_file *m)
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index aea321c..a4bb239 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -49,7 +49,8 @@
* but it will at least advance closer to the next one
* to be released.
*/
-static struct rb_node *release_next(struct rb_node *node)
+static struct rb_node *release_next(struct tracer_stat *ts,
+ struct rb_node *node)
{
struct stat_node *snode;
struct rb_node *parent = rb_parent(node);
@@ -67,6 +68,8 @@
parent->rb_right = NULL;
snode = container_of(node, struct stat_node, node);
+ if (ts->stat_release)
+ ts->stat_release(snode->stat);
kfree(snode);
return parent;
@@ -78,7 +81,7 @@
struct rb_node *node = session->stat_root.rb_node;
while (node)
- node = release_next(node);
+ node = release_next(session->ts, node);
session->stat_root = RB_ROOT;
}
@@ -200,17 +203,21 @@
{
struct stat_session *session = s->private;
struct rb_node *node;
+ int n = *pos;
int i;
/* Prevent from tracer switch or rbtree modification */
mutex_lock(&session->stat_mutex);
/* If we are in the beginning of the file, print the headers */
- if (!*pos && session->ts->stat_headers)
- return SEQ_START_TOKEN;
+ if (session->ts->stat_headers) {
+ if (n == 0)
+ return SEQ_START_TOKEN;
+ n--;
+ }
node = rb_first(&session->stat_root);
- for (i = 0; node && i < *pos; i++)
+ for (i = 0; node && i < n; i++)
node = rb_next(node);
return node;
diff --git a/kernel/trace/trace_stat.h b/kernel/trace/trace_stat.h
index f3546a2..8f03914 100644
--- a/kernel/trace/trace_stat.h
+++ b/kernel/trace/trace_stat.h
@@ -18,6 +18,8 @@
int (*stat_cmp)(void *p1, void *p2);
/* Print a stat entry */
int (*stat_show)(struct seq_file *s, void *p);
+ /* Release an entry */
+ void (*stat_release)(void *stat);
/* Print the headers of your stat entries */
int (*stat_headers)(struct seq_file *s);
};
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 5e57964..8712ce3 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -1,30 +1,18 @@
#include <trace/syscall.h>
+#include <trace/events/syscalls.h>
#include <linux/kernel.h>
+#include <linux/ftrace.h>
+#include <linux/perf_counter.h>
#include <asm/syscall.h>
#include "trace_output.h"
#include "trace.h"
-/* Keep a counter of the syscall tracing users */
-static int refcount;
-
-/* Prevent from races on thread flags toggling */
static DEFINE_MUTEX(syscall_trace_lock);
-
-/* Option to display the parameters types */
-enum {
- TRACE_SYSCALLS_OPT_TYPES = 0x1,
-};
-
-static struct tracer_opt syscalls_opts[] = {
- { TRACER_OPT(syscall_arg_type, TRACE_SYSCALLS_OPT_TYPES) },
- { }
-};
-
-static struct tracer_flags syscalls_flags = {
- .val = 0, /* By default: no parameters types */
- .opts = syscalls_opts
-};
+static int sys_refcount_enter;
+static int sys_refcount_exit;
+static DECLARE_BITMAP(enabled_enter_syscalls, NR_syscalls);
+static DECLARE_BITMAP(enabled_exit_syscalls, NR_syscalls);
enum print_line_t
print_syscall_enter(struct trace_iterator *iter, int flags)
@@ -35,35 +23,46 @@
struct syscall_metadata *entry;
int i, ret, syscall;
- trace_assign_type(trace, ent);
-
+ trace = (typeof(trace))ent;
syscall = trace->nr;
-
entry = syscall_nr_to_meta(syscall);
+
if (!entry)
goto end;
+ if (entry->enter_id != ent->type) {
+ WARN_ON_ONCE(1);
+ goto end;
+ }
+
ret = trace_seq_printf(s, "%s(", entry->name);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
for (i = 0; i < entry->nb_args; i++) {
/* parameter types */
- if (syscalls_flags.val & TRACE_SYSCALLS_OPT_TYPES) {
+ if (trace_flags & TRACE_ITER_VERBOSE) {
ret = trace_seq_printf(s, "%s ", entry->types[i]);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
}
/* parameter values */
- ret = trace_seq_printf(s, "%s: %lx%s ", entry->args[i],
+ ret = trace_seq_printf(s, "%s: %lx%s", entry->args[i],
trace->args[i],
- i == entry->nb_args - 1 ? ")" : ",");
+ i == entry->nb_args - 1 ? "" : ", ");
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
}
+ ret = trace_seq_putc(s, ')');
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+
end:
- trace_seq_printf(s, "\n");
+ ret = trace_seq_putc(s, '\n');
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+
return TRACE_TYPE_HANDLED;
}
@@ -77,16 +76,20 @@
struct syscall_metadata *entry;
int ret;
- trace_assign_type(trace, ent);
-
+ trace = (typeof(trace))ent;
syscall = trace->nr;
-
entry = syscall_nr_to_meta(syscall);
+
if (!entry) {
trace_seq_printf(s, "\n");
return TRACE_TYPE_HANDLED;
}
+ if (entry->exit_id != ent->type) {
+ WARN_ON_ONCE(1);
+ return TRACE_TYPE_UNHANDLED;
+ }
+
ret = trace_seq_printf(s, "%s -> 0x%lx\n", entry->name,
trace->ret);
if (!ret)
@@ -95,62 +98,140 @@
return TRACE_TYPE_HANDLED;
}
-void start_ftrace_syscalls(void)
+extern char *__bad_type_size(void);
+
+#define SYSCALL_FIELD(type, name) \
+ sizeof(type) != sizeof(trace.name) ? \
+ __bad_type_size() : \
+ #type, #name, offsetof(typeof(trace), name), sizeof(trace.name)
+
+int syscall_enter_format(struct ftrace_event_call *call, struct trace_seq *s)
{
- unsigned long flags;
- struct task_struct *g, *t;
+ int i;
+ int nr;
+ int ret;
+ struct syscall_metadata *entry;
+ struct syscall_trace_enter trace;
+ int offset = offsetof(struct syscall_trace_enter, args);
- mutex_lock(&syscall_trace_lock);
+ nr = syscall_name_to_nr(call->data);
+ entry = syscall_nr_to_meta(nr);
- /* Don't enable the flag on the tasks twice */
- if (++refcount != 1)
- goto unlock;
+ if (!entry)
+ return 0;
- arch_init_ftrace_syscalls();
- read_lock_irqsave(&tasklist_lock, flags);
+ ret = trace_seq_printf(s, "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n",
+ SYSCALL_FIELD(int, nr));
+ if (!ret)
+ return 0;
- do_each_thread(g, t) {
- set_tsk_thread_flag(t, TIF_SYSCALL_FTRACE);
- } while_each_thread(g, t);
+ for (i = 0; i < entry->nb_args; i++) {
+ ret = trace_seq_printf(s, "\tfield:%s %s;", entry->types[i],
+ entry->args[i]);
+ if (!ret)
+ return 0;
+ ret = trace_seq_printf(s, "\toffset:%d;\tsize:%zu;\n", offset,
+ sizeof(unsigned long));
+ if (!ret)
+ return 0;
+ offset += sizeof(unsigned long);
+ }
- read_unlock_irqrestore(&tasklist_lock, flags);
+ trace_seq_puts(s, "\nprint fmt: \"");
+ for (i = 0; i < entry->nb_args; i++) {
+ ret = trace_seq_printf(s, "%s: 0x%%0%zulx%s", entry->args[i],
+ sizeof(unsigned long),
+ i == entry->nb_args - 1 ? "" : ", ");
+ if (!ret)
+ return 0;
+ }
+ trace_seq_putc(s, '"');
-unlock:
- mutex_unlock(&syscall_trace_lock);
+ for (i = 0; i < entry->nb_args; i++) {
+ ret = trace_seq_printf(s, ", ((unsigned long)(REC->%s))",
+ entry->args[i]);
+ if (!ret)
+ return 0;
+ }
+
+ return trace_seq_putc(s, '\n');
}
-void stop_ftrace_syscalls(void)
+int syscall_exit_format(struct ftrace_event_call *call, struct trace_seq *s)
{
- unsigned long flags;
- struct task_struct *g, *t;
+ int ret;
+ struct syscall_trace_exit trace;
- mutex_lock(&syscall_trace_lock);
+ ret = trace_seq_printf(s,
+ "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
+ "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n",
+ SYSCALL_FIELD(int, nr),
+ SYSCALL_FIELD(unsigned long, ret));
+ if (!ret)
+ return 0;
- /* There are perhaps still some users */
- if (--refcount)
- goto unlock;
-
- read_lock_irqsave(&tasklist_lock, flags);
-
- do_each_thread(g, t) {
- clear_tsk_thread_flag(t, TIF_SYSCALL_FTRACE);
- } while_each_thread(g, t);
-
- read_unlock_irqrestore(&tasklist_lock, flags);
-
-unlock:
- mutex_unlock(&syscall_trace_lock);
+ return trace_seq_printf(s, "\nprint fmt: \"0x%%lx\", REC->ret\n");
}
-void ftrace_syscall_enter(struct pt_regs *regs)
+int syscall_enter_define_fields(struct ftrace_event_call *call)
+{
+ struct syscall_trace_enter trace;
+ struct syscall_metadata *meta;
+ int ret;
+ int nr;
+ int i;
+ int offset = offsetof(typeof(trace), args);
+
+ nr = syscall_name_to_nr(call->data);
+ meta = syscall_nr_to_meta(nr);
+
+ if (!meta)
+ return 0;
+
+ ret = trace_define_common_fields(call);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < meta->nb_args; i++) {
+ ret = trace_define_field(call, meta->types[i],
+ meta->args[i], offset,
+ sizeof(unsigned long), 0,
+ FILTER_OTHER);
+ offset += sizeof(unsigned long);
+ }
+
+ return ret;
+}
+
+int syscall_exit_define_fields(struct ftrace_event_call *call)
+{
+ struct syscall_trace_exit trace;
+ int ret;
+
+ ret = trace_define_common_fields(call);
+ if (ret)
+ return ret;
+
+ ret = trace_define_field(call, SYSCALL_FIELD(unsigned long, ret), 0,
+ FILTER_OTHER);
+
+ return ret;
+}
+
+void ftrace_syscall_enter(struct pt_regs *regs, long id)
{
struct syscall_trace_enter *entry;
struct syscall_metadata *sys_data;
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
int size;
int syscall_nr;
syscall_nr = syscall_get_nr(current, regs);
+ if (syscall_nr < 0)
+ return;
+ if (!test_bit(syscall_nr, enabled_enter_syscalls))
+ return;
sys_data = syscall_nr_to_meta(syscall_nr);
if (!sys_data)
@@ -158,8 +239,8 @@
size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
- event = trace_current_buffer_lock_reserve(TRACE_SYSCALL_ENTER, size,
- 0, 0);
+ event = trace_current_buffer_lock_reserve(&buffer, sys_data->enter_id,
+ size, 0, 0);
if (!event)
return;
@@ -167,24 +248,30 @@
entry->nr = syscall_nr;
syscall_get_arguments(current, regs, 0, sys_data->nb_args, entry->args);
- trace_current_buffer_unlock_commit(event, 0, 0);
- trace_wake_up();
+ if (!filter_current_check_discard(buffer, sys_data->enter_event,
+ entry, event))
+ trace_current_buffer_unlock_commit(buffer, event, 0, 0);
}
-void ftrace_syscall_exit(struct pt_regs *regs)
+void ftrace_syscall_exit(struct pt_regs *regs, long ret)
{
struct syscall_trace_exit *entry;
struct syscall_metadata *sys_data;
struct ring_buffer_event *event;
+ struct ring_buffer *buffer;
int syscall_nr;
syscall_nr = syscall_get_nr(current, regs);
+ if (syscall_nr < 0)
+ return;
+ if (!test_bit(syscall_nr, enabled_exit_syscalls))
+ return;
sys_data = syscall_nr_to_meta(syscall_nr);
if (!sys_data)
return;
- event = trace_current_buffer_lock_reserve(TRACE_SYSCALL_EXIT,
+ event = trace_current_buffer_lock_reserve(&buffer, sys_data->exit_id,
sizeof(*entry), 0, 0);
if (!event)
return;
@@ -193,58 +280,244 @@
entry->nr = syscall_nr;
entry->ret = syscall_get_return_value(current, regs);
- trace_current_buffer_unlock_commit(event, 0, 0);
- trace_wake_up();
+ if (!filter_current_check_discard(buffer, sys_data->exit_event,
+ entry, event))
+ trace_current_buffer_unlock_commit(buffer, event, 0, 0);
}
-static int init_syscall_tracer(struct trace_array *tr)
+int reg_event_syscall_enter(void *ptr)
{
- start_ftrace_syscalls();
+ int ret = 0;
+ int num;
+ char *name;
- return 0;
-}
-
-static void reset_syscall_tracer(struct trace_array *tr)
-{
- stop_ftrace_syscalls();
- tracing_reset_online_cpus(tr);
-}
-
-static struct trace_event syscall_enter_event = {
- .type = TRACE_SYSCALL_ENTER,
- .trace = print_syscall_enter,
-};
-
-static struct trace_event syscall_exit_event = {
- .type = TRACE_SYSCALL_EXIT,
- .trace = print_syscall_exit,
-};
-
-static struct tracer syscall_tracer __read_mostly = {
- .name = "syscall",
- .init = init_syscall_tracer,
- .reset = reset_syscall_tracer,
- .flags = &syscalls_flags,
-};
-
-__init int register_ftrace_syscalls(void)
-{
- int ret;
-
- ret = register_ftrace_event(&syscall_enter_event);
- if (!ret) {
- printk(KERN_WARNING "event %d failed to register\n",
- syscall_enter_event.type);
- WARN_ON_ONCE(1);
+ name = (char *)ptr;
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return -ENOSYS;
+ mutex_lock(&syscall_trace_lock);
+ if (!sys_refcount_enter)
+ ret = register_trace_sys_enter(ftrace_syscall_enter);
+ if (ret) {
+ pr_info("event trace: Could not activate"
+ "syscall entry trace point");
+ } else {
+ set_bit(num, enabled_enter_syscalls);
+ sys_refcount_enter++;
}
-
- ret = register_ftrace_event(&syscall_exit_event);
- if (!ret) {
- printk(KERN_WARNING "event %d failed to register\n",
- syscall_exit_event.type);
- WARN_ON_ONCE(1);
- }
-
- return register_tracer(&syscall_tracer);
+ mutex_unlock(&syscall_trace_lock);
+ return ret;
}
-device_initcall(register_ftrace_syscalls);
+
+void unreg_event_syscall_enter(void *ptr)
+{
+ int num;
+ char *name;
+
+ name = (char *)ptr;
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return;
+ mutex_lock(&syscall_trace_lock);
+ sys_refcount_enter--;
+ clear_bit(num, enabled_enter_syscalls);
+ if (!sys_refcount_enter)
+ unregister_trace_sys_enter(ftrace_syscall_enter);
+ mutex_unlock(&syscall_trace_lock);
+}
+
+int reg_event_syscall_exit(void *ptr)
+{
+ int ret = 0;
+ int num;
+ char *name;
+
+ name = (char *)ptr;
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return -ENOSYS;
+ mutex_lock(&syscall_trace_lock);
+ if (!sys_refcount_exit)
+ ret = register_trace_sys_exit(ftrace_syscall_exit);
+ if (ret) {
+ pr_info("event trace: Could not activate"
+ "syscall exit trace point");
+ } else {
+ set_bit(num, enabled_exit_syscalls);
+ sys_refcount_exit++;
+ }
+ mutex_unlock(&syscall_trace_lock);
+ return ret;
+}
+
+void unreg_event_syscall_exit(void *ptr)
+{
+ int num;
+ char *name;
+
+ name = (char *)ptr;
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return;
+ mutex_lock(&syscall_trace_lock);
+ sys_refcount_exit--;
+ clear_bit(num, enabled_exit_syscalls);
+ if (!sys_refcount_exit)
+ unregister_trace_sys_exit(ftrace_syscall_exit);
+ mutex_unlock(&syscall_trace_lock);
+}
+
+struct trace_event event_syscall_enter = {
+ .trace = print_syscall_enter,
+};
+
+struct trace_event event_syscall_exit = {
+ .trace = print_syscall_exit,
+};
+
+#ifdef CONFIG_EVENT_PROFILE
+
+static DECLARE_BITMAP(enabled_prof_enter_syscalls, NR_syscalls);
+static DECLARE_BITMAP(enabled_prof_exit_syscalls, NR_syscalls);
+static int sys_prof_refcount_enter;
+static int sys_prof_refcount_exit;
+
+static void prof_syscall_enter(struct pt_regs *regs, long id)
+{
+ struct syscall_trace_enter *rec;
+ struct syscall_metadata *sys_data;
+ int syscall_nr;
+ int size;
+
+ syscall_nr = syscall_get_nr(current, regs);
+ if (!test_bit(syscall_nr, enabled_prof_enter_syscalls))
+ return;
+
+ sys_data = syscall_nr_to_meta(syscall_nr);
+ if (!sys_data)
+ return;
+
+ /* get the size after alignment with the u32 buffer size field */
+ size = sizeof(unsigned long) * sys_data->nb_args + sizeof(*rec);
+ size = ALIGN(size + sizeof(u32), sizeof(u64));
+ size -= sizeof(u32);
+
+ do {
+ char raw_data[size];
+
+ /* zero the dead bytes from align to not leak stack to user */
+ *(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
+
+ rec = (struct syscall_trace_enter *) raw_data;
+ tracing_generic_entry_update(&rec->ent, 0, 0);
+ rec->ent.type = sys_data->enter_id;
+ rec->nr = syscall_nr;
+ syscall_get_arguments(current, regs, 0, sys_data->nb_args,
+ (unsigned long *)&rec->args);
+ perf_tpcounter_event(sys_data->enter_id, 0, 1, rec, size);
+ } while(0);
+}
+
+int reg_prof_syscall_enter(char *name)
+{
+ int ret = 0;
+ int num;
+
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return -ENOSYS;
+
+ mutex_lock(&syscall_trace_lock);
+ if (!sys_prof_refcount_enter)
+ ret = register_trace_sys_enter(prof_syscall_enter);
+ if (ret) {
+ pr_info("event trace: Could not activate"
+ "syscall entry trace point");
+ } else {
+ set_bit(num, enabled_prof_enter_syscalls);
+ sys_prof_refcount_enter++;
+ }
+ mutex_unlock(&syscall_trace_lock);
+ return ret;
+}
+
+void unreg_prof_syscall_enter(char *name)
+{
+ int num;
+
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return;
+
+ mutex_lock(&syscall_trace_lock);
+ sys_prof_refcount_enter--;
+ clear_bit(num, enabled_prof_enter_syscalls);
+ if (!sys_prof_refcount_enter)
+ unregister_trace_sys_enter(prof_syscall_enter);
+ mutex_unlock(&syscall_trace_lock);
+}
+
+static void prof_syscall_exit(struct pt_regs *regs, long ret)
+{
+ struct syscall_metadata *sys_data;
+ struct syscall_trace_exit rec;
+ int syscall_nr;
+
+ syscall_nr = syscall_get_nr(current, regs);
+ if (!test_bit(syscall_nr, enabled_prof_exit_syscalls))
+ return;
+
+ sys_data = syscall_nr_to_meta(syscall_nr);
+ if (!sys_data)
+ return;
+
+ tracing_generic_entry_update(&rec.ent, 0, 0);
+ rec.ent.type = sys_data->exit_id;
+ rec.nr = syscall_nr;
+ rec.ret = syscall_get_return_value(current, regs);
+
+ perf_tpcounter_event(sys_data->exit_id, 0, 1, &rec, sizeof(rec));
+}
+
+int reg_prof_syscall_exit(char *name)
+{
+ int ret = 0;
+ int num;
+
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return -ENOSYS;
+
+ mutex_lock(&syscall_trace_lock);
+ if (!sys_prof_refcount_exit)
+ ret = register_trace_sys_exit(prof_syscall_exit);
+ if (ret) {
+ pr_info("event trace: Could not activate"
+ "syscall entry trace point");
+ } else {
+ set_bit(num, enabled_prof_exit_syscalls);
+ sys_prof_refcount_exit++;
+ }
+ mutex_unlock(&syscall_trace_lock);
+ return ret;
+}
+
+void unreg_prof_syscall_exit(char *name)
+{
+ int num;
+
+ num = syscall_name_to_nr(name);
+ if (num < 0 || num >= NR_syscalls)
+ return;
+
+ mutex_lock(&syscall_trace_lock);
+ sys_prof_refcount_exit--;
+ clear_bit(num, enabled_prof_exit_syscalls);
+ if (!sys_prof_refcount_exit)
+ unregister_trace_sys_exit(prof_syscall_exit);
+ mutex_unlock(&syscall_trace_lock);
+}
+
+#endif
+
+
diff --git a/kernel/trace/trace_workqueue.c b/kernel/trace/trace_workqueue.c
index 97fcea4..40cafb0 100644
--- a/kernel/trace/trace_workqueue.c
+++ b/kernel/trace/trace_workqueue.c
@@ -9,6 +9,7 @@
#include <trace/events/workqueue.h>
#include <linux/list.h>
#include <linux/percpu.h>
+#include <linux/kref.h>
#include "trace_stat.h"
#include "trace.h"
@@ -16,6 +17,7 @@
/* A cpu workqueue thread */
struct cpu_workqueue_stats {
struct list_head list;
+ struct kref kref;
int cpu;
pid_t pid;
/* Can be inserted from interrupt or user context, need to be atomic */
@@ -39,6 +41,11 @@
static DEFINE_PER_CPU(struct workqueue_global_stats, all_workqueue_stat);
#define workqueue_cpu_stat(cpu) (&per_cpu(all_workqueue_stat, cpu))
+static void cpu_workqueue_stat_free(struct kref *kref)
+{
+ kfree(container_of(kref, struct cpu_workqueue_stats, kref));
+}
+
/* Insertion of a work */
static void
probe_workqueue_insertion(struct task_struct *wq_thread,
@@ -96,8 +103,8 @@
return;
}
INIT_LIST_HEAD(&cws->list);
+ kref_init(&cws->kref);
cws->cpu = cpu;
-
cws->pid = wq_thread->pid;
spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
@@ -118,7 +125,7 @@
list) {
if (node->pid == wq_thread->pid) {
list_del(&node->list);
- kfree(node);
+ kref_put(&node->kref, cpu_workqueue_stat_free);
goto found;
}
}
@@ -137,9 +144,11 @@
spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
- if (!list_empty(&workqueue_cpu_stat(cpu)->list))
+ if (!list_empty(&workqueue_cpu_stat(cpu)->list)) {
ret = list_entry(workqueue_cpu_stat(cpu)->list.next,
struct cpu_workqueue_stats, list);
+ kref_get(&ret->kref);
+ }
spin_unlock_irqrestore(&workqueue_cpu_stat(cpu)->lock, flags);
@@ -162,9 +171,9 @@
static void *workqueue_stat_next(void *prev, int idx)
{
struct cpu_workqueue_stats *prev_cws = prev;
+ struct cpu_workqueue_stats *ret;
int cpu = prev_cws->cpu;
unsigned long flags;
- void *ret = NULL;
spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
if (list_is_last(&prev_cws->list, &workqueue_cpu_stat(cpu)->list)) {
@@ -175,11 +184,14 @@
return NULL;
} while (!(ret = workqueue_stat_start_cpu(cpu)));
return ret;
+ } else {
+ ret = list_entry(prev_cws->list.next,
+ struct cpu_workqueue_stats, list);
+ kref_get(&ret->kref);
}
spin_unlock_irqrestore(&workqueue_cpu_stat(cpu)->lock, flags);
- return list_entry(prev_cws->list.next, struct cpu_workqueue_stats,
- list);
+ return ret;
}
static int workqueue_stat_show(struct seq_file *s, void *p)
@@ -203,6 +215,13 @@
return 0;
}
+static void workqueue_stat_release(void *stat)
+{
+ struct cpu_workqueue_stats *node = stat;
+
+ kref_put(&node->kref, cpu_workqueue_stat_free);
+}
+
static int workqueue_stat_headers(struct seq_file *s)
{
seq_printf(s, "# CPU INSERTED EXECUTED NAME\n");
@@ -215,6 +234,7 @@
.stat_start = workqueue_stat_start,
.stat_next = workqueue_stat_next,
.stat_show = workqueue_stat_show,
+ .stat_release = workqueue_stat_release,
.stat_headers = workqueue_stat_headers
};
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index 1ef5d3a..9489a0a 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -24,6 +24,7 @@
#include <linux/tracepoint.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/sched.h>
extern struct tracepoint __start___tracepoints[];
extern struct tracepoint __stop___tracepoints[];
@@ -242,6 +243,11 @@
{
WARN_ON(strcmp((*entry)->name, elem->name) != 0);
+ if (elem->regfunc && !elem->state && active)
+ elem->regfunc();
+ else if (elem->unregfunc && elem->state && !active)
+ elem->unregfunc();
+
/*
* rcu_assign_pointer has a smp_wmb() which makes sure that the new
* probe callbacks array is consistent before setting a pointer to it.
@@ -261,6 +267,9 @@
*/
static void disable_tracepoint(struct tracepoint *elem)
{
+ if (elem->unregfunc && elem->state)
+ elem->unregfunc();
+
elem->state = 0;
rcu_assign_pointer(elem->funcs, NULL);
}
@@ -554,9 +563,6 @@
switch (val) {
case MODULE_STATE_COMING:
- tracepoint_update_probe_range(mod->tracepoints,
- mod->tracepoints + mod->num_tracepoints);
- break;
case MODULE_STATE_GOING:
tracepoint_update_probe_range(mod->tracepoints,
mod->tracepoints + mod->num_tracepoints);
@@ -577,3 +583,41 @@
__initcall(init_tracepoints);
#endif /* CONFIG_MODULES */
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+
+/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
+static int sys_tracepoint_refcount;
+
+void syscall_regfunc(void)
+{
+ unsigned long flags;
+ struct task_struct *g, *t;
+
+ if (!sys_tracepoint_refcount) {
+ read_lock_irqsave(&tasklist_lock, flags);
+ do_each_thread(g, t) {
+ /* Skip kernel threads. */
+ if (t->mm)
+ set_tsk_thread_flag(t, TIF_SYSCALL_TRACEPOINT);
+ } while_each_thread(g, t);
+ read_unlock_irqrestore(&tasklist_lock, flags);
+ }
+ sys_tracepoint_refcount++;
+}
+
+void syscall_unregfunc(void)
+{
+ unsigned long flags;
+ struct task_struct *g, *t;
+
+ sys_tracepoint_refcount--;
+ if (!sys_tracepoint_refcount) {
+ read_lock_irqsave(&tasklist_lock, flags);
+ do_each_thread(g, t) {
+ clear_tsk_thread_flag(t, TIF_SYSCALL_TRACEPOINT);
+ } while_each_thread(g, t);
+ read_unlock_irqrestore(&tasklist_lock, flags);
+ }
+}
+#endif
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 0668795..addfe2d 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -317,8 +317,6 @@
if (cwq->wq->freezeable)
set_freezable();
- set_user_nice(current, -5);
-
for (;;) {
prepare_to_wait(&cwq->more_work, &wait, TASK_INTERRUPTIBLE);
if (!freezing(current) &&
@@ -600,7 +598,12 @@
* schedule_work - put work task in global workqueue
* @work: job to be done
*
- * This puts a job in the kernel-global workqueue.
+ * Returns zero if @work was already on the kernel-global workqueue and
+ * non-zero otherwise.
+ *
+ * This puts a job in the kernel-global workqueue if it was not already
+ * queued and leaves it in the same position on the kernel-global
+ * workqueue otherwise.
*/
int schedule_work(struct work_struct *work)
{
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 12327b2..7dbd5d9 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -653,6 +653,21 @@
This is a relatively cheap check but if you care about maximum
performance, say N.
+config DEBUG_CREDENTIALS
+ bool "Debug credential management"
+ depends on DEBUG_KERNEL
+ help
+ Enable this to turn on some debug checking for credential
+ management. The additional code keeps track of the number of
+ pointers from task_structs to any given cred struct, and checks to
+ see that this number never exceeds the usage count of the cred
+ struct.
+
+ Furthermore, if SELinux is enabled, this also checks that the
+ security pointer in the cred struct is never seen to be invalid.
+
+ If unsure, say N.
+
#
# Select this config option from the architecture Kconfig, if it
# it is preferred to always offer frame pointers as a config
@@ -725,7 +740,7 @@
config RCU_CPU_STALL_DETECTOR
bool "Check for stalled CPUs delaying RCU grace periods"
- depends on CLASSIC_RCU || TREE_RCU
+ depends on TREE_RCU || TREE_PREEMPT_RCU
default n
help
This option causes RCU to printk information on which
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 65b0d99..58a9f9f 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -156,9 +156,13 @@
return true;
/* driver filter on and initialized */
- if (current_driver && dev->driver == current_driver)
+ if (current_driver && dev && dev->driver == current_driver)
return true;
+ /* driver filter on, but we can't filter on a NULL device... */
+ if (!dev)
+ return false;
+
if (current_driver || !current_driver_name[0])
return false;
@@ -183,17 +187,17 @@
return ret;
}
-#define err_printk(dev, entry, format, arg...) do { \
- error_count += 1; \
- if (driver_filter(dev) && \
- (show_all_errors || show_num_errors > 0)) { \
- WARN(1, "%s %s: " format, \
- dev_driver_string(dev), \
- dev_name(dev) , ## arg); \
- dump_entry_trace(entry); \
- } \
- if (!show_all_errors && show_num_errors > 0) \
- show_num_errors -= 1; \
+#define err_printk(dev, entry, format, arg...) do { \
+ error_count += 1; \
+ if (driver_filter(dev) && \
+ (show_all_errors || show_num_errors > 0)) { \
+ WARN(1, "%s %s: " format, \
+ dev ? dev_driver_string(dev) : "NULL", \
+ dev ? dev_name(dev) : "NULL", ## arg); \
+ dump_entry_trace(entry); \
+ } \
+ if (!show_all_errors && show_num_errors > 0) \
+ show_num_errors -= 1; \
} while (0);
/*
diff --git a/lib/flex_array.c b/lib/flex_array.c
index 08f1636..7baed2f 100644
--- a/lib/flex_array.c
+++ b/lib/flex_array.c
@@ -99,7 +99,8 @@
* capacity in the base structure. Also note that no effort is made
* to efficiently pack objects across page boundaries.
*/
-struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags)
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+ gfp_t flags)
{
struct flex_array *ret;
int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
@@ -115,16 +116,14 @@
return ret;
}
-static int fa_element_to_part_nr(struct flex_array *fa, int element_nr)
+static int fa_element_to_part_nr(struct flex_array *fa,
+ unsigned int element_nr)
{
return element_nr / __elements_per_part(fa->element_size);
}
/**
* flex_array_free_parts - just free the second-level pages
- * @src: address of data to copy into the array
- * @element_nr: index of the position in which to insert
- * the new element.
*
* This is to be used in cases where the base 'struct flex_array'
* has been statically allocated and should not be free.
@@ -146,14 +145,12 @@
kfree(fa);
}
-static int fa_index_inside_part(struct flex_array *fa, int element_nr)
+static unsigned int index_inside_part(struct flex_array *fa,
+ unsigned int element_nr)
{
- return element_nr % __elements_per_part(fa->element_size);
-}
+ unsigned int part_offset;
-static int index_inside_part(struct flex_array *fa, int element_nr)
-{
- int part_offset = fa_index_inside_part(fa, element_nr);
+ part_offset = element_nr % __elements_per_part(fa->element_size);
return part_offset * fa->element_size;
}
@@ -188,7 +185,8 @@
*
* Locking must be provided by the caller.
*/
-int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags)
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+ gfp_t flags)
{
int part_nr = fa_element_to_part_nr(fa, element_nr);
struct flex_array_part *part;
@@ -198,10 +196,11 @@
return -ENOSPC;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
- else
+ else {
part = __fa_get_part(fa, part_nr, flags);
- if (!part)
- return -ENOMEM;
+ if (!part)
+ return -ENOMEM;
+ }
dst = &part->elements[index_inside_part(fa, element_nr)];
memcpy(dst, src, fa->element_size);
return 0;
@@ -219,7 +218,8 @@
*
* Locking must be provided by the caller.
*/
-int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags)
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+ unsigned int end, gfp_t flags)
{
int start_part;
int end_part;
@@ -250,18 +250,19 @@
*
* Locking must be provided by the caller.
*/
-void *flex_array_get(struct flex_array *fa, int element_nr)
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr)
{
int part_nr = fa_element_to_part_nr(fa, element_nr);
struct flex_array_part *part;
if (element_nr >= fa->total_nr_elements)
return NULL;
- if (!fa->parts[part_nr])
- return NULL;
if (elements_fit_in_base(fa))
part = (struct flex_array_part *)&fa->parts[0];
- else
+ else {
part = fa->parts[part_nr];
+ if (!part)
+ return NULL;
+ }
return &part->elements[index_inside_part(fa, element_nr)];
}
diff --git a/lib/is_single_threaded.c b/lib/is_single_threaded.c
index f1ed2fe..bd2bea9 100644
--- a/lib/is_single_threaded.c
+++ b/lib/is_single_threaded.c
@@ -12,34 +12,47 @@
#include <linux/sched.h>
-/**
- * is_single_threaded - Determine if a thread group is single-threaded or not
- * @p: A task in the thread group in question
- *
- * This returns true if the thread group to which a task belongs is single
- * threaded, false if it is not.
+/*
+ * Returns true if the task does not share ->mm with another thread/process.
*/
-bool is_single_threaded(struct task_struct *p)
+bool current_is_single_threaded(void)
{
- struct task_struct *g, *t;
- struct mm_struct *mm = p->mm;
+ struct task_struct *task = current;
+ struct mm_struct *mm = task->mm;
+ struct task_struct *p, *t;
+ bool ret;
- if (atomic_read(&p->signal->count) != 1)
- goto no;
+ if (atomic_read(&task->signal->live) != 1)
+ return false;
- if (atomic_read(&p->mm->mm_users) != 1) {
- read_lock(&tasklist_lock);
- do_each_thread(g, t) {
- if (t->mm == mm && t != p)
- goto no_unlock;
- } while_each_thread(g, t);
- read_unlock(&tasklist_lock);
+ if (atomic_read(&mm->mm_users) == 1)
+ return true;
+
+ ret = false;
+ rcu_read_lock();
+ for_each_process(p) {
+ if (unlikely(p->flags & PF_KTHREAD))
+ continue;
+ if (unlikely(p == task->group_leader))
+ continue;
+
+ t = p;
+ do {
+ if (unlikely(t->mm == mm))
+ goto found;
+ if (likely(t->mm))
+ break;
+ /*
+ * t->mm == NULL. Make sure next_thread/next_task
+ * will see other CLONE_VM tasks which might be
+ * forked before exiting.
+ */
+ smp_rmb();
+ } while_each_thread(p, t);
}
+ ret = true;
+found:
+ rcu_read_unlock();
- return true;
-
-no_unlock:
- read_unlock(&tasklist_lock);
-no:
- return false;
+ return ret;
}
diff --git a/lib/lmb.c b/lib/lmb.c
index e4a6482..0343c05 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -429,7 +429,7 @@
return lmb.memory.size;
}
-u64 __init lmb_end_of_DRAM(void)
+u64 lmb_end_of_DRAM(void)
{
int idx = lmb.memory.cnt - 1;
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index bffe6d7..ac25cd2 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -114,46 +114,11 @@
__setup("swiotlb=", setup_io_tlb_npages);
/* make io_tlb_overflow tunable too? */
-void * __weak __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
-{
- return alloc_bootmem_low_pages(size);
-}
-
-void * __weak swiotlb_alloc(unsigned order, unsigned long nslabs)
-{
- return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-}
-
-dma_addr_t __weak swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
- return paddr;
-}
-
-phys_addr_t __weak swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-{
- return baddr;
-}
-
+/* Note that this doesn't work with highmem page */
static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
volatile void *address)
{
- return swiotlb_phys_to_bus(hwdev, virt_to_phys(address));
-}
-
-void * __weak swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t address)
-{
- return phys_to_virt(swiotlb_bus_to_phys(hwdev, address));
-}
-
-int __weak swiotlb_arch_address_needs_mapping(struct device *hwdev,
- dma_addr_t addr, size_t size)
-{
- return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
-}
-
-int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
-{
- return 0;
+ return phys_to_dma(hwdev, virt_to_phys(address));
}
static void swiotlb_print_info(unsigned long bytes)
@@ -189,7 +154,7 @@
/*
* Get IO TLB memory from the low pages
*/
- io_tlb_start = swiotlb_alloc_boot(bytes, io_tlb_nslabs);
+ io_tlb_start = alloc_bootmem_low_pages(bytes);
if (!io_tlb_start)
panic("Cannot allocate SWIOTLB buffer");
io_tlb_end = io_tlb_start + bytes;
@@ -245,7 +210,8 @@
bytes = io_tlb_nslabs << IO_TLB_SHIFT;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
- io_tlb_start = swiotlb_alloc(order, io_tlb_nslabs);
+ io_tlb_start = (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
+ order);
if (io_tlb_start)
break;
order--;
@@ -315,20 +281,10 @@
return -ENOMEM;
}
-static inline int
-address_needs_mapping(struct device *hwdev, dma_addr_t addr, size_t size)
+static int is_swiotlb_buffer(phys_addr_t paddr)
{
- return swiotlb_arch_address_needs_mapping(hwdev, addr, size);
-}
-
-static inline int range_needs_mapping(phys_addr_t paddr, size_t size)
-{
- return swiotlb_force || swiotlb_arch_range_needs_mapping(paddr, size);
-}
-
-static int is_swiotlb_buffer(char *addr)
-{
- return addr >= io_tlb_start && addr < io_tlb_end;
+ return paddr >= virt_to_phys(io_tlb_start) &&
+ paddr < virt_to_phys(io_tlb_end);
}
/*
@@ -561,9 +517,7 @@
dma_mask = hwdev->coherent_dma_mask;
ret = (void *)__get_free_pages(flags, order);
- if (ret &&
- !is_buffer_dma_capable(dma_mask, swiotlb_virt_to_bus(hwdev, ret),
- size)) {
+ if (ret && swiotlb_virt_to_bus(hwdev, ret) + size > dma_mask) {
/*
* The allocated memory isn't reachable by the device.
*/
@@ -585,7 +539,7 @@
dev_addr = swiotlb_virt_to_bus(hwdev, ret);
/* Confirm address can be DMA'd by device */
- if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) {
+ if (dev_addr + size > dma_mask) {
printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
(unsigned long long)dma_mask,
(unsigned long long)dev_addr);
@@ -601,11 +555,13 @@
void
swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
- dma_addr_t dma_handle)
+ dma_addr_t dev_addr)
{
+ phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
+
WARN_ON(irqs_disabled());
- if (!is_swiotlb_buffer(vaddr))
- free_pages((unsigned long) vaddr, get_order(size));
+ if (!is_swiotlb_buffer(paddr))
+ free_pages((unsigned long)vaddr, get_order(size));
else
/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
@@ -625,12 +581,15 @@
printk(KERN_ERR "DMA: Out of SW-IOMMU space for %zu bytes at "
"device %s\n", size, dev ? dev_name(dev) : "?");
- if (size > io_tlb_overflow && do_panic) {
- if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
- panic("DMA: Memory would be corrupted\n");
- if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
- panic("DMA: Random memory would be DMAed\n");
- }
+ if (size <= io_tlb_overflow || !do_panic)
+ return;
+
+ if (dir == DMA_BIDIRECTIONAL)
+ panic("DMA: Random memory could be DMA accessed\n");
+ if (dir == DMA_FROM_DEVICE)
+ panic("DMA: Random memory could be DMA written\n");
+ if (dir == DMA_TO_DEVICE)
+ panic("DMA: Random memory could be DMA read\n");
}
/*
@@ -646,7 +605,7 @@
struct dma_attrs *attrs)
{
phys_addr_t phys = page_to_phys(page) + offset;
- dma_addr_t dev_addr = swiotlb_phys_to_bus(dev, phys);
+ dma_addr_t dev_addr = phys_to_dma(dev, phys);
void *map;
BUG_ON(dir == DMA_NONE);
@@ -655,8 +614,7 @@
* we can safely return the device addr and not worry about bounce
* buffering it.
*/
- if (!address_needs_mapping(dev, dev_addr, size) &&
- !range_needs_mapping(phys, size))
+ if (dma_capable(dev, dev_addr, size) && !swiotlb_force)
return dev_addr;
/*
@@ -673,7 +631,7 @@
/*
* Ensure that the address returned is DMA'ble
*/
- if (address_needs_mapping(dev, dev_addr, size))
+ if (!dma_capable(dev, dev_addr, size))
panic("map_single: bounce buffer is not DMA'ble");
return dev_addr;
@@ -691,19 +649,25 @@
static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, int dir)
{
- char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
+ phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
BUG_ON(dir == DMA_NONE);
- if (is_swiotlb_buffer(dma_addr)) {
- do_unmap_single(hwdev, dma_addr, size, dir);
+ if (is_swiotlb_buffer(paddr)) {
+ do_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
return;
}
if (dir != DMA_FROM_DEVICE)
return;
- dma_mark_clean(dma_addr, size);
+ /*
+ * phys_to_virt doesn't work with hihgmem page but we could
+ * call dma_mark_clean() with hihgmem page here. However, we
+ * are fine since dma_mark_clean() is null on POWERPC. We can
+ * make dma_mark_clean() take a physical address if necessary.
+ */
+ dma_mark_clean(phys_to_virt(paddr), size);
}
void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
@@ -728,19 +692,19 @@
swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, int dir, int target)
{
- char *dma_addr = swiotlb_bus_to_virt(hwdev, dev_addr);
+ phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
BUG_ON(dir == DMA_NONE);
- if (is_swiotlb_buffer(dma_addr)) {
- sync_single(hwdev, dma_addr, size, dir, target);
+ if (is_swiotlb_buffer(paddr)) {
+ sync_single(hwdev, phys_to_virt(paddr), size, dir, target);
return;
}
if (dir != DMA_FROM_DEVICE)
return;
- dma_mark_clean(dma_addr, size);
+ dma_mark_clean(phys_to_virt(paddr), size);
}
void
@@ -817,10 +781,10 @@
for_each_sg(sgl, sg, nelems, i) {
phys_addr_t paddr = sg_phys(sg);
- dma_addr_t dev_addr = swiotlb_phys_to_bus(hwdev, paddr);
+ dma_addr_t dev_addr = phys_to_dma(hwdev, paddr);
- if (range_needs_mapping(paddr, sg->length) ||
- address_needs_mapping(hwdev, dev_addr, sg->length)) {
+ if (swiotlb_force ||
+ !dma_capable(hwdev, dev_addr, sg->length)) {
void *map = map_single(hwdev, sg_phys(sg),
sg->length, dir);
if (!map) {
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 756ccaf..cb8a112 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -25,6 +25,7 @@
#include <linux/kallsyms.h>
#include <linux/uaccess.h>
#include <linux/ioport.h>
+#include <net/addrconf.h>
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
@@ -630,60 +631,156 @@
}
static char *mac_address_string(char *buf, char *end, u8 *addr,
- struct printf_spec spec)
+ struct printf_spec spec, const char *fmt)
{
- char mac_addr[6 * 3]; /* (6 * 2 hex digits), 5 colons and trailing zero */
+ char mac_addr[sizeof("xx:xx:xx:xx:xx:xx")];
char *p = mac_addr;
int i;
for (i = 0; i < 6; i++) {
p = pack_hex_byte(p, addr[i]);
- if (!(spec.flags & SPECIAL) && i != 5)
+ if (fmt[0] == 'M' && i != 5)
*p++ = ':';
}
*p = '\0';
- spec.flags &= ~SPECIAL;
return string(buf, end, mac_addr, spec);
}
-static char *ip6_addr_string(char *buf, char *end, u8 *addr,
- struct printf_spec spec)
+static char *ip4_string(char *p, const u8 *addr, bool leading_zeros)
{
- char ip6_addr[8 * 5]; /* (8 * 4 hex digits), 7 colons and trailing zero */
- char *p = ip6_addr;
int i;
+ for (i = 0; i < 4; i++) {
+ char temp[3]; /* hold each IP quad in reverse order */
+ int digits = put_dec_trunc(temp, addr[i]) - temp;
+ if (leading_zeros) {
+ if (digits < 3)
+ *p++ = '0';
+ if (digits < 2)
+ *p++ = '0';
+ }
+ /* reverse the digits in the quad */
+ while (digits--)
+ *p++ = temp[digits];
+ if (i < 3)
+ *p++ = '.';
+ }
+
+ *p = '\0';
+ return p;
+}
+
+static char *ip6_compressed_string(char *p, const struct in6_addr *addr)
+{
+ int i;
+ int j;
+ int range;
+ unsigned char zerolength[8];
+ int longest = 1;
+ int colonpos = -1;
+ u16 word;
+ u8 hi;
+ u8 lo;
+ bool needcolon = false;
+ bool useIPv4 = ipv6_addr_v4mapped(addr) || ipv6_addr_is_isatap(addr);
+
+ memset(zerolength, 0, sizeof(zerolength));
+
+ if (useIPv4)
+ range = 6;
+ else
+ range = 8;
+
+ /* find position of longest 0 run */
+ for (i = 0; i < range; i++) {
+ for (j = i; j < range; j++) {
+ if (addr->s6_addr16[j] != 0)
+ break;
+ zerolength[i]++;
+ }
+ }
+ for (i = 0; i < range; i++) {
+ if (zerolength[i] > longest) {
+ longest = zerolength[i];
+ colonpos = i;
+ }
+ }
+
+ /* emit address */
+ for (i = 0; i < range; i++) {
+ if (i == colonpos) {
+ if (needcolon || i == 0)
+ *p++ = ':';
+ *p++ = ':';
+ needcolon = false;
+ i += longest - 1;
+ continue;
+ }
+ if (needcolon) {
+ *p++ = ':';
+ needcolon = false;
+ }
+ /* hex u16 without leading 0s */
+ word = ntohs(addr->s6_addr16[i]);
+ hi = word >> 8;
+ lo = word & 0xff;
+ if (hi) {
+ if (hi > 0x0f)
+ p = pack_hex_byte(p, hi);
+ else
+ *p++ = hex_asc_lo(hi);
+ }
+ if (hi || lo > 0x0f)
+ p = pack_hex_byte(p, lo);
+ else
+ *p++ = hex_asc_lo(lo);
+ needcolon = true;
+ }
+
+ if (useIPv4) {
+ if (needcolon)
+ *p++ = ':';
+ p = ip4_string(p, &addr->s6_addr[12], false);
+ }
+
+ *p = '\0';
+ return p;
+}
+
+static char *ip6_string(char *p, const struct in6_addr *addr, const char *fmt)
+{
+ int i;
for (i = 0; i < 8; i++) {
- p = pack_hex_byte(p, addr[2 * i]);
- p = pack_hex_byte(p, addr[2 * i + 1]);
- if (!(spec.flags & SPECIAL) && i != 7)
+ p = pack_hex_byte(p, addr->s6_addr[2 * i]);
+ p = pack_hex_byte(p, addr->s6_addr[2 * i + 1]);
+ if (fmt[0] == 'I' && i != 7)
*p++ = ':';
}
+
*p = '\0';
- spec.flags &= ~SPECIAL;
+ return p;
+}
+
+static char *ip6_addr_string(char *buf, char *end, const u8 *addr,
+ struct printf_spec spec, const char *fmt)
+{
+ char ip6_addr[sizeof("xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:255.255.255.255")];
+
+ if (fmt[0] == 'I' && fmt[2] == 'c')
+ ip6_compressed_string(ip6_addr, (const struct in6_addr *)addr);
+ else
+ ip6_string(ip6_addr, (const struct in6_addr *)addr, fmt);
return string(buf, end, ip6_addr, spec);
}
-static char *ip4_addr_string(char *buf, char *end, u8 *addr,
- struct printf_spec spec)
+static char *ip4_addr_string(char *buf, char *end, const u8 *addr,
+ struct printf_spec spec, const char *fmt)
{
- char ip4_addr[4 * 4]; /* (4 * 3 decimal digits), 3 dots and trailing zero */
- char temp[3]; /* hold each IP quad in reverse order */
- char *p = ip4_addr;
- int i, digits;
+ char ip4_addr[sizeof("255.255.255.255")];
- for (i = 0; i < 4; i++) {
- digits = put_dec_trunc(temp, addr[i]) - temp;
- /* reverse the digits in the quad */
- while (digits--)
- *p++ = temp[digits];
- if (i != 3)
- *p++ = '.';
- }
- *p = '\0';
- spec.flags &= ~SPECIAL;
+ ip4_string(ip4_addr, addr, fmt[0] == 'i');
return string(buf, end, ip4_addr, spec);
}
@@ -702,11 +799,15 @@
* addresses (not the name nor the flags)
* - 'M' For a 6-byte MAC address, it prints the address in the
* usual colon-separated hex notation
- * - 'I' [46] for IPv4/IPv6 addresses printed in the usual way (dot-separated
- * decimal for v4 and colon separated network-order 16 bit hex for v6)
- * - 'i' [46] for 'raw' IPv4/IPv6 addresses, IPv6 omits the colons, IPv4 is
- * currently the same
- *
+ * - 'm' For a 6-byte MAC address, it prints the hex address without colons
+ * - 'I' [46] for IPv4/IPv6 addresses printed in the usual way
+ * IPv4 uses dot-separated decimal without leading 0's (1.2.3.4)
+ * IPv6 uses colon separated network-order 16 bit hex with leading 0's
+ * - 'i' [46] for 'raw' IPv4/IPv6 addresses
+ * IPv6 omits the colons (01020304...0f)
+ * IPv4 uses dot-separated decimal with leading 0's (010.123.045.006)
+ * - 'I6c' for IPv6 addresses printed as specified by
+ * http://www.ietf.org/id/draft-kawamura-ipv6-text-representation-03.txt
* Note: The difference between 'S' and 'F' is that on ia64 and ppc64
* function pointers are really function descriptors, which contain a
* pointer to the real address.
@@ -726,20 +827,24 @@
return symbol_string(buf, end, ptr, spec, *fmt);
case 'R':
return resource_string(buf, end, ptr, spec);
- case 'm':
- spec.flags |= SPECIAL;
- /* Fallthrough */
- case 'M':
- return mac_address_string(buf, end, ptr, spec);
- case 'i':
- spec.flags |= SPECIAL;
- /* Fallthrough */
- case 'I':
- if (fmt[1] == '6')
- return ip6_addr_string(buf, end, ptr, spec);
- if (fmt[1] == '4')
- return ip4_addr_string(buf, end, ptr, spec);
- spec.flags &= ~SPECIAL;
+ case 'M': /* Colon separated: 00:01:02:03:04:05 */
+ case 'm': /* Contiguous: 000102030405 */
+ return mac_address_string(buf, end, ptr, spec, fmt);
+ case 'I': /* Formatted IP supported
+ * 4: 1.2.3.4
+ * 6: 0001:0203:...:0708
+ * 6c: 1::708 or 1::1.2.3.4
+ */
+ case 'i': /* Contiguous:
+ * 4: 001.002.003.004
+ * 6: 000102...0f
+ */
+ switch (fmt[1]) {
+ case '6':
+ return ip6_addr_string(buf, end, ptr, spec, fmt);
+ case '4':
+ return ip4_addr_string(buf, end, ptr, spec, fmt);
+ }
break;
}
spec.flags |= SMALL;
diff --git a/mm/Makefile b/mm/Makefile
index 5e0bd64..147a7a7 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -8,7 +8,7 @@
vmalloc.o
obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
- maccess.o page_alloc.o page-writeback.o pdflush.o \
+ maccess.o page_alloc.o page-writeback.o \
readahead.o swap.o truncate.o vmscan.o shmem.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o mm_init.o $(mmu-y)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index c86edd2..d3ca0da 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -1,8 +1,11 @@
#include <linux/wait.h>
#include <linux/backing-dev.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/writeback.h>
@@ -14,6 +17,7 @@
EXPORT_SYMBOL(default_unplug_io_fn);
struct backing_dev_info default_backing_dev_info = {
+ .name = "default",
.ra_pages = VM_MAX_READAHEAD * 1024 / PAGE_CACHE_SIZE,
.state = 0,
.capabilities = BDI_CAP_MAP_COPY,
@@ -22,6 +26,18 @@
EXPORT_SYMBOL_GPL(default_backing_dev_info);
static struct class *bdi_class;
+DEFINE_SPINLOCK(bdi_lock);
+LIST_HEAD(bdi_list);
+LIST_HEAD(bdi_pending_list);
+
+static struct task_struct *sync_supers_tsk;
+static struct timer_list sync_supers_timer;
+
+static int bdi_sync_supers(void *);
+static void sync_supers_timer_fn(unsigned long);
+static void arm_supers_timer(void);
+
+static void bdi_add_default_flusher_task(struct backing_dev_info *bdi);
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
@@ -37,9 +53,29 @@
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
struct backing_dev_info *bdi = m->private;
+ struct bdi_writeback *wb;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
+ unsigned long nr_dirty, nr_io, nr_more_io, nr_wb;
+ struct inode *inode;
+
+ /*
+ * inode lock is enough here, the bdi->wb_list is protected by
+ * RCU on the reader side
+ */
+ nr_wb = nr_dirty = nr_io = nr_more_io = 0;
+ spin_lock(&inode_lock);
+ list_for_each_entry(wb, &bdi->wb_list, list) {
+ nr_wb++;
+ list_for_each_entry(inode, &wb->b_dirty, i_list)
+ nr_dirty++;
+ list_for_each_entry(inode, &wb->b_io, i_list)
+ nr_io++;
+ list_for_each_entry(inode, &wb->b_more_io, i_list)
+ nr_more_io++;
+ }
+ spin_unlock(&inode_lock);
get_dirty_limits(&background_thresh, &dirty_thresh, &bdi_thresh, bdi);
@@ -49,12 +85,22 @@
"BdiReclaimable: %8lu kB\n"
"BdiDirtyThresh: %8lu kB\n"
"DirtyThresh: %8lu kB\n"
- "BackgroundThresh: %8lu kB\n",
+ "BackgroundThresh: %8lu kB\n"
+ "WriteBack threads:%8lu\n"
+ "b_dirty: %8lu\n"
+ "b_io: %8lu\n"
+ "b_more_io: %8lu\n"
+ "bdi_list: %8u\n"
+ "state: %8lx\n"
+ "wb_mask: %8lx\n"
+ "wb_list: %8u\n"
+ "wb_cnt: %8u\n",
(unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
(unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
- K(bdi_thresh),
- K(dirty_thresh),
- K(background_thresh));
+ K(bdi_thresh), K(dirty_thresh),
+ K(background_thresh), nr_wb, nr_dirty, nr_io, nr_more_io,
+ !list_empty(&bdi->bdi_list), bdi->state, bdi->wb_mask,
+ !list_empty(&bdi->wb_list), bdi->wb_cnt);
#undef K
return 0;
@@ -185,6 +231,13 @@
{
int err;
+ sync_supers_tsk = kthread_run(bdi_sync_supers, NULL, "sync_supers");
+ BUG_ON(IS_ERR(sync_supers_tsk));
+
+ init_timer(&sync_supers_timer);
+ setup_timer(&sync_supers_timer, sync_supers_timer_fn, 0);
+ arm_supers_timer();
+
err = bdi_init(&default_backing_dev_info);
if (!err)
bdi_register(&default_backing_dev_info, NULL, "default");
@@ -193,6 +246,248 @@
}
subsys_initcall(default_bdi_init);
+static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
+{
+ memset(wb, 0, sizeof(*wb));
+
+ wb->bdi = bdi;
+ wb->last_old_flush = jiffies;
+ INIT_LIST_HEAD(&wb->b_dirty);
+ INIT_LIST_HEAD(&wb->b_io);
+ INIT_LIST_HEAD(&wb->b_more_io);
+}
+
+static void bdi_task_init(struct backing_dev_info *bdi,
+ struct bdi_writeback *wb)
+{
+ struct task_struct *tsk = current;
+
+ spin_lock(&bdi->wb_lock);
+ list_add_tail_rcu(&wb->list, &bdi->wb_list);
+ spin_unlock(&bdi->wb_lock);
+
+ tsk->flags |= PF_FLUSHER | PF_SWAPWRITE;
+ set_freezable();
+
+ /*
+ * Our parent may run at a different priority, just set us to normal
+ */
+ set_user_nice(tsk, 0);
+}
+
+static int bdi_start_fn(void *ptr)
+{
+ struct bdi_writeback *wb = ptr;
+ struct backing_dev_info *bdi = wb->bdi;
+ int ret;
+
+ /*
+ * Add us to the active bdi_list
+ */
+ spin_lock(&bdi_lock);
+ list_add(&bdi->bdi_list, &bdi_list);
+ spin_unlock(&bdi_lock);
+
+ bdi_task_init(bdi, wb);
+
+ /*
+ * Clear pending bit and wakeup anybody waiting to tear us down
+ */
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
+
+ ret = bdi_writeback_task(wb);
+
+ /*
+ * Remove us from the list
+ */
+ spin_lock(&bdi->wb_lock);
+ list_del_rcu(&wb->list);
+ spin_unlock(&bdi->wb_lock);
+
+ /*
+ * Flush any work that raced with us exiting. No new work
+ * will be added, since this bdi isn't discoverable anymore.
+ */
+ if (!list_empty(&bdi->work_list))
+ wb_do_writeback(wb, 1);
+
+ wb->task = NULL;
+ return ret;
+}
+
+int bdi_has_dirty_io(struct backing_dev_info *bdi)
+{
+ return wb_has_dirty_io(&bdi->wb);
+}
+
+static void bdi_flush_io(struct backing_dev_info *bdi)
+{
+ struct writeback_control wbc = {
+ .bdi = bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .older_than_this = NULL,
+ .range_cyclic = 1,
+ .nr_to_write = 1024,
+ };
+
+ writeback_inodes_wbc(&wbc);
+}
+
+/*
+ * kupdated() used to do this. We cannot do it from the bdi_forker_task()
+ * or we risk deadlocking on ->s_umount. The longer term solution would be
+ * to implement sync_supers_bdi() or similar and simply do it from the
+ * bdi writeback tasks individually.
+ */
+static int bdi_sync_supers(void *unused)
+{
+ set_user_nice(current, 0);
+
+ while (!kthread_should_stop()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+
+ /*
+ * Do this periodically, like kupdated() did before.
+ */
+ sync_supers();
+ }
+
+ return 0;
+}
+
+static void arm_supers_timer(void)
+{
+ unsigned long next;
+
+ next = msecs_to_jiffies(dirty_writeback_interval * 10) + jiffies;
+ mod_timer(&sync_supers_timer, round_jiffies_up(next));
+}
+
+static void sync_supers_timer_fn(unsigned long unused)
+{
+ wake_up_process(sync_supers_tsk);
+ arm_supers_timer();
+}
+
+static int bdi_forker_task(void *ptr)
+{
+ struct bdi_writeback *me = ptr;
+
+ bdi_task_init(me->bdi, me);
+
+ for (;;) {
+ struct backing_dev_info *bdi, *tmp;
+ struct bdi_writeback *wb;
+
+ /*
+ * Temporary measure, we want to make sure we don't see
+ * dirty data on the default backing_dev_info
+ */
+ if (wb_has_dirty_io(me) || !list_empty(&me->bdi->work_list))
+ wb_do_writeback(me, 0);
+
+ spin_lock(&bdi_lock);
+
+ /*
+ * Check if any existing bdi's have dirty data without
+ * a thread registered. If so, set that up.
+ */
+ list_for_each_entry_safe(bdi, tmp, &bdi_list, bdi_list) {
+ if (bdi->wb.task)
+ continue;
+ if (list_empty(&bdi->work_list) &&
+ !bdi_has_dirty_io(bdi))
+ continue;
+
+ bdi_add_default_flusher_task(bdi);
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (list_empty(&bdi_pending_list)) {
+ unsigned long wait;
+
+ spin_unlock(&bdi_lock);
+ wait = msecs_to_jiffies(dirty_writeback_interval * 10);
+ schedule_timeout(wait);
+ try_to_freeze();
+ continue;
+ }
+
+ __set_current_state(TASK_RUNNING);
+
+ /*
+ * This is our real job - check for pending entries in
+ * bdi_pending_list, and create the tasks that got added
+ */
+ bdi = list_entry(bdi_pending_list.next, struct backing_dev_info,
+ bdi_list);
+ list_del_init(&bdi->bdi_list);
+ spin_unlock(&bdi_lock);
+
+ wb = &bdi->wb;
+ wb->task = kthread_run(bdi_start_fn, wb, "flush-%s",
+ dev_name(bdi->dev));
+ /*
+ * If task creation fails, then readd the bdi to
+ * the pending list and force writeout of the bdi
+ * from this forker thread. That will free some memory
+ * and we can try again.
+ */
+ if (IS_ERR(wb->task)) {
+ wb->task = NULL;
+
+ /*
+ * Add this 'bdi' to the back, so we get
+ * a chance to flush other bdi's to free
+ * memory.
+ */
+ spin_lock(&bdi_lock);
+ list_add_tail(&bdi->bdi_list, &bdi_pending_list);
+ spin_unlock(&bdi_lock);
+
+ bdi_flush_io(bdi);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Add the default flusher task that gets created for any bdi
+ * that has dirty data pending writeout
+ */
+void static bdi_add_default_flusher_task(struct backing_dev_info *bdi)
+{
+ if (!bdi_cap_writeback_dirty(bdi))
+ return;
+
+ if (WARN_ON(!test_bit(BDI_registered, &bdi->state))) {
+ printk(KERN_ERR "bdi %p/%s is not registered!\n",
+ bdi, bdi->name);
+ return;
+ }
+
+ /*
+ * Check with the helper whether to proceed adding a task. Will only
+ * abort if we two or more simultanous calls to
+ * bdi_add_default_flusher_task() occured, further additions will block
+ * waiting for previous additions to finish.
+ */
+ if (!test_and_set_bit(BDI_pending, &bdi->state)) {
+ list_move_tail(&bdi->bdi_list, &bdi_pending_list);
+
+ /*
+ * We are now on the pending list, wake up bdi_forker_task()
+ * to finish the job and add us back to the active bdi_list
+ */
+ wake_up_process(default_backing_dev_info.wb.task);
+ }
+}
+
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
@@ -211,9 +506,35 @@
goto exit;
}
- bdi->dev = dev;
- bdi_debug_register(bdi, dev_name(dev));
+ spin_lock(&bdi_lock);
+ list_add_tail(&bdi->bdi_list, &bdi_list);
+ spin_unlock(&bdi_lock);
+ bdi->dev = dev;
+
+ /*
+ * Just start the forker thread for our default backing_dev_info,
+ * and add other bdi's to the list. They will get a thread created
+ * on-demand when they need it.
+ */
+ if (bdi_cap_flush_forker(bdi)) {
+ struct bdi_writeback *wb = &bdi->wb;
+
+ wb->task = kthread_run(bdi_forker_task, wb, "bdi-%s",
+ dev_name(dev));
+ if (IS_ERR(wb->task)) {
+ wb->task = NULL;
+ ret = -ENOMEM;
+
+ spin_lock(&bdi_lock);
+ list_del(&bdi->bdi_list);
+ spin_unlock(&bdi_lock);
+ goto exit;
+ }
+ }
+
+ bdi_debug_register(bdi, dev_name(dev));
+ set_bit(BDI_registered, &bdi->state);
exit:
return ret;
}
@@ -225,9 +546,42 @@
}
EXPORT_SYMBOL(bdi_register_dev);
+/*
+ * Remove bdi from the global list and shutdown any threads we have running
+ */
+static void bdi_wb_shutdown(struct backing_dev_info *bdi)
+{
+ struct bdi_writeback *wb;
+
+ if (!bdi_cap_writeback_dirty(bdi))
+ return;
+
+ /*
+ * If setup is pending, wait for that to complete first
+ */
+ wait_on_bit(&bdi->state, BDI_pending, bdi_sched_wait,
+ TASK_UNINTERRUPTIBLE);
+
+ /*
+ * Make sure nobody finds us on the bdi_list anymore
+ */
+ spin_lock(&bdi_lock);
+ list_del(&bdi->bdi_list);
+ spin_unlock(&bdi_lock);
+
+ /*
+ * Finally, kill the kernel threads. We don't need to be RCU
+ * safe anymore, since the bdi is gone from visibility.
+ */
+ list_for_each_entry(wb, &bdi->wb_list, list)
+ kthread_stop(wb->task);
+}
+
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ if (!bdi_cap_flush_forker(bdi))
+ bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
device_unregister(bdi->dev);
bdi->dev = NULL;
@@ -237,14 +591,25 @@
int bdi_init(struct backing_dev_info *bdi)
{
- int i;
- int err;
+ int i, err;
bdi->dev = NULL;
bdi->min_ratio = 0;
bdi->max_ratio = 100;
bdi->max_prop_frac = PROP_FRAC_BASE;
+ spin_lock_init(&bdi->wb_lock);
+ INIT_LIST_HEAD(&bdi->bdi_list);
+ INIT_LIST_HEAD(&bdi->wb_list);
+ INIT_LIST_HEAD(&bdi->work_list);
+
+ bdi_wb_init(&bdi->wb, bdi);
+
+ /*
+ * Just one thread support for now, hard code mask and count
+ */
+ bdi->wb_mask = 1;
+ bdi->wb_cnt = 1;
for (i = 0; i < NR_BDI_STAT_ITEMS; i++) {
err = percpu_counter_init(&bdi->bdi_stat[i], 0);
@@ -269,6 +634,8 @@
{
int i;
+ WARN_ON(bdi_has_dirty_io(bdi));
+
bdi_unregister(bdi);
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 701740c..555d5d2 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -521,7 +521,11 @@
region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
start_off);
memset(region, 0, size);
- kmemleak_alloc(region, size, 1, 0);
+ /*
+ * The min_count is set to 0 so that bootmem allocated blocks
+ * are never reported as leaks.
+ */
+ kmemleak_alloc(region, size, 0, 0);
return region;
}
diff --git a/mm/filemap.c b/mm/filemap.c
index ccea3b6..dd51c68e 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -39,11 +39,10 @@
/*
* FIXME: remove all knowledge of the buffer layer from the core VM
*/
-#include <linux/buffer_head.h> /* for generic_osync_inode */
+#include <linux/buffer_head.h> /* for try_to_free_buffers */
#include <asm/mman.h>
-
/*
* Shared mappings implemented 30.11.1994. It's not fully working yet,
* though.
@@ -307,68 +306,24 @@
}
/**
- * sync_page_range - write and wait on all pages in the passed range
- * @inode: target inode
- * @mapping: target address_space
- * @pos: beginning offset in pages to write
- * @count: number of bytes to write
+ * filemap_fdatawait_range - wait for all under-writeback pages to complete in a given range
+ * @mapping: address space structure to wait for
+ * @start: offset in bytes where the range starts
+ * @end: offset in bytes where the range ends (inclusive)
*
- * Write and wait upon all the pages in the passed range. This is a "data
- * integrity" operation. It waits upon in-flight writeout before starting and
- * waiting upon new writeout. If there was an IO error, return it.
+ * Walk the list of under-writeback pages of the given address space
+ * in the given range and wait for all of them.
*
- * We need to re-take i_mutex during the generic_osync_inode list walk because
- * it is otherwise livelockable.
+ * This is just a simple wrapper so that callers don't have to convert offsets
+ * to page indexes themselves
*/
-int sync_page_range(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count)
+int filemap_fdatawait_range(struct address_space *mapping, loff_t start,
+ loff_t end)
{
- pgoff_t start = pos >> PAGE_CACHE_SHIFT;
- pgoff_t end = (pos + count - 1) >> PAGE_CACHE_SHIFT;
- int ret;
-
- if (!mapping_cap_writeback_dirty(mapping) || !count)
- return 0;
- ret = filemap_fdatawrite_range(mapping, pos, pos + count - 1);
- if (ret == 0) {
- mutex_lock(&inode->i_mutex);
- ret = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- mutex_unlock(&inode->i_mutex);
- }
- if (ret == 0)
- ret = wait_on_page_writeback_range(mapping, start, end);
- return ret;
+ return wait_on_page_writeback_range(mapping, start >> PAGE_CACHE_SHIFT,
+ end >> PAGE_CACHE_SHIFT);
}
-EXPORT_SYMBOL(sync_page_range);
-
-/**
- * sync_page_range_nolock - write & wait on all pages in the passed range without locking
- * @inode: target inode
- * @mapping: target address_space
- * @pos: beginning offset in pages to write
- * @count: number of bytes to write
- *
- * Note: Holding i_mutex across sync_page_range_nolock() is not a good idea
- * as it forces O_SYNC writers to different parts of the same file
- * to be serialised right until io completion.
- */
-int sync_page_range_nolock(struct inode *inode, struct address_space *mapping,
- loff_t pos, loff_t count)
-{
- pgoff_t start = pos >> PAGE_CACHE_SHIFT;
- pgoff_t end = (pos + count - 1) >> PAGE_CACHE_SHIFT;
- int ret;
-
- if (!mapping_cap_writeback_dirty(mapping) || !count)
- return 0;
- ret = filemap_fdatawrite_range(mapping, pos, pos + count - 1);
- if (ret == 0)
- ret = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- if (ret == 0)
- ret = wait_on_page_writeback_range(mapping, start, end);
- return ret;
-}
-EXPORT_SYMBOL(sync_page_range_nolock);
+EXPORT_SYMBOL(filemap_fdatawait_range);
/**
* filemap_fdatawait - wait for all under-writeback pages to complete
@@ -2167,20 +2122,7 @@
}
*ppos = end;
}
-
- /*
- * Sync the fs metadata but not the minor inode changes and
- * of course not the data as we did direct DMA for the IO.
- * i_mutex is held, which protects generic_osync_inode() from
- * livelocking. AIO O_DIRECT ops attempt to sync metadata here.
- */
out:
- if ((written >= 0 || written == -EIOCBQUEUED) &&
- ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- int err = generic_osync_inode(inode, mapping, OSYNC_METADATA);
- if (err < 0)
- written = err;
- }
return written;
}
EXPORT_SYMBOL(generic_file_direct_write);
@@ -2312,8 +2254,6 @@
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
- const struct address_space_operations *a_ops = mapping->a_ops;
- struct inode *inode = mapping->host;
ssize_t status;
struct iov_iter i;
@@ -2323,16 +2263,6 @@
if (likely(status >= 0)) {
written += status;
*ppos = pos + status;
-
- /*
- * For now, when the user asks for O_SYNC, we'll actually give
- * O_DSYNC
- */
- if (unlikely((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- if (!a_ops->writepage || !is_sync_kiocb(iocb))
- status = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
- }
}
/*
@@ -2348,9 +2278,27 @@
}
EXPORT_SYMBOL(generic_file_buffered_write);
-static ssize_t
-__generic_file_aio_write_nolock(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t *ppos)
+/**
+ * __generic_file_aio_write - write data to a file
+ * @iocb: IO state structure (file, offset, etc.)
+ * @iov: vector with data to write
+ * @nr_segs: number of segments in the vector
+ * @ppos: position where to write
+ *
+ * This function does all the work needed for actually writing data to a
+ * file. It does all basic checks, removes SUID from the file, updates
+ * modification times and calls proper subroutines depending on whether we
+ * do direct IO or a standard buffered write.
+ *
+ * It expects i_mutex to be grabbed unless we work on a block device or similar
+ * object which does not need locking at all.
+ *
+ * This function does *not* take care of syncing data in case of O_SYNC write.
+ * A caller has to handle it. This is mainly due to the fact that we want to
+ * avoid syncing under i_mutex.
+ */
+ssize_t __generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t *ppos)
{
struct file *file = iocb->ki_filp;
struct address_space * mapping = file->f_mapping;
@@ -2447,51 +2395,37 @@
current->backing_dev_info = NULL;
return written ? written : err;
}
+EXPORT_SYMBOL(__generic_file_aio_write);
-ssize_t generic_file_aio_write_nolock(struct kiocb *iocb,
- const struct iovec *iov, unsigned long nr_segs, loff_t pos)
-{
- struct file *file = iocb->ki_filp;
- struct address_space *mapping = file->f_mapping;
- struct inode *inode = mapping->host;
- ssize_t ret;
-
- BUG_ON(iocb->ki_pos != pos);
-
- ret = __generic_file_aio_write_nolock(iocb, iov, nr_segs,
- &iocb->ki_pos);
-
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
- ssize_t err;
-
- err = sync_page_range_nolock(inode, mapping, pos, ret);
- if (err < 0)
- ret = err;
- }
- return ret;
-}
-EXPORT_SYMBOL(generic_file_aio_write_nolock);
-
+/**
+ * generic_file_aio_write - write data to a file
+ * @iocb: IO state structure
+ * @iov: vector with data to write
+ * @nr_segs: number of segments in the vector
+ * @pos: position in file where to write
+ *
+ * This is a wrapper around __generic_file_aio_write() to be used by most
+ * filesystems. It takes care of syncing the file in case of O_SYNC file
+ * and acquires i_mutex as needed.
+ */
ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct file *file = iocb->ki_filp;
- struct address_space *mapping = file->f_mapping;
- struct inode *inode = mapping->host;
+ struct inode *inode = file->f_mapping->host;
ssize_t ret;
BUG_ON(iocb->ki_pos != pos);
mutex_lock(&inode->i_mutex);
- ret = __generic_file_aio_write_nolock(iocb, iov, nr_segs,
- &iocb->ki_pos);
+ ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
mutex_unlock(&inode->i_mutex);
- if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ if (ret > 0 || ret == -EIOCBQUEUED) {
ssize_t err;
- err = sync_page_range(inode, mapping, pos, ret);
- if (err < 0)
+ err = generic_write_sync(file, pos, ret);
+ if (err < 0 && ret > 0)
ret = err;
}
return ret;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index cafdcee..b16d636 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -234,6 +234,7 @@
return 1UL << (hstate->order + PAGE_SHIFT);
}
+EXPORT_SYMBOL_GPL(vma_kernel_pagesize);
/*
* Return the page size being used by the MMU to back a VMA. In the majority
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 4872673..4ea4510 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -92,11 +92,13 @@
#include <linux/string.h>
#include <linux/nodemask.h>
#include <linux/mm.h>
+#include <linux/workqueue.h>
#include <asm/sections.h>
#include <asm/processor.h>
#include <asm/atomic.h>
+#include <linux/kmemcheck.h>
#include <linux/kmemleak.h>
/*
@@ -107,6 +109,7 @@
#define SECS_FIRST_SCAN 60 /* delay before the first scan */
#define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */
#define GRAY_LIST_PASSES 25 /* maximum number of gray list scans */
+#define MAX_SCAN_SIZE 4096 /* maximum size of a scanned block */
#define BYTES_PER_POINTER sizeof(void *)
@@ -120,6 +123,9 @@
size_t length;
};
+#define KMEMLEAK_GREY 0
+#define KMEMLEAK_BLACK -1
+
/*
* Structure holding the metadata for each allocated memory block.
* Modifications to such objects should be made while holding the
@@ -161,6 +167,15 @@
/* flag set on newly allocated objects */
#define OBJECT_NEW (1 << 3)
+/* number of bytes to print per line; must be 16 or 32 */
+#define HEX_ROW_SIZE 16
+/* number of bytes to print at a time (1, 2, 4, 8) */
+#define HEX_GROUP_SIZE 1
+/* include ASCII after the hex output */
+#define HEX_ASCII 1
+/* max number of lines to be printed */
+#define HEX_MAX_LINES 2
+
/* the list of all allocated objects */
static LIST_HEAD(object_list);
/* the list of gray-colored objects (see color_gray comment below) */
@@ -228,11 +243,14 @@
int min_count; /* minimum reference count */
unsigned long offset; /* scan area offset */
size_t length; /* scan area length */
+ unsigned long trace[MAX_TRACE]; /* stack trace */
+ unsigned int trace_len; /* stack trace length */
};
/* early logging buffer and current position */
-static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE];
-static int crt_early_log;
+static struct early_log
+ early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE] __initdata;
+static int crt_early_log __initdata;
static void kmemleak_disable(void);
@@ -255,6 +273,35 @@
} while (0)
/*
+ * Printing of the objects hex dump to the seq file. The number of lines to be
+ * printed is limited to HEX_MAX_LINES to prevent seq file spamming. The
+ * actual number of printed bytes depends on HEX_ROW_SIZE. It must be called
+ * with the object->lock held.
+ */
+static void hex_dump_object(struct seq_file *seq,
+ struct kmemleak_object *object)
+{
+ const u8 *ptr = (const u8 *)object->pointer;
+ int i, len, remaining;
+ unsigned char linebuf[HEX_ROW_SIZE * 5];
+
+ /* limit the number of lines to HEX_MAX_LINES */
+ remaining = len =
+ min(object->size, (size_t)(HEX_MAX_LINES * HEX_ROW_SIZE));
+
+ seq_printf(seq, " hex dump (first %d bytes):\n", len);
+ for (i = 0; i < len; i += HEX_ROW_SIZE) {
+ int linelen = min(remaining, HEX_ROW_SIZE);
+
+ remaining -= HEX_ROW_SIZE;
+ hex_dump_to_buffer(ptr + i, linelen, HEX_ROW_SIZE,
+ HEX_GROUP_SIZE, linebuf, sizeof(linebuf),
+ HEX_ASCII);
+ seq_printf(seq, " %s\n", linebuf);
+ }
+}
+
+/*
* Object colors, encoded with count and min_count:
* - white - orphan object, not enough references to it (count < min_count)
* - gray - not orphan, not marked as false positive (min_count == 0) or
@@ -264,19 +311,21 @@
* Newly created objects don't have any color assigned (object->count == -1)
* before the next memory scan when they become white.
*/
-static int color_white(const struct kmemleak_object *object)
+static bool color_white(const struct kmemleak_object *object)
{
- return object->count != -1 && object->count < object->min_count;
+ return object->count != KMEMLEAK_BLACK &&
+ object->count < object->min_count;
}
-static int color_gray(const struct kmemleak_object *object)
+static bool color_gray(const struct kmemleak_object *object)
{
- return object->min_count != -1 && object->count >= object->min_count;
+ return object->min_count != KMEMLEAK_BLACK &&
+ object->count >= object->min_count;
}
-static int color_black(const struct kmemleak_object *object)
+static bool color_black(const struct kmemleak_object *object)
{
- return object->min_count == -1;
+ return object->min_count == KMEMLEAK_BLACK;
}
/*
@@ -284,7 +333,7 @@
* not be deleted and have a minimum age to avoid false positives caused by
* pointers temporarily stored in CPU registers.
*/
-static int unreferenced_object(struct kmemleak_object *object)
+static bool unreferenced_object(struct kmemleak_object *object)
{
return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
time_before_eq(object->jiffies + jiffies_min_age,
@@ -304,6 +353,7 @@
object->pointer, object->size);
seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu\n",
object->comm, object->pid, object->jiffies);
+ hex_dump_object(seq, object);
seq_printf(seq, " backtrace:\n");
for (i = 0; i < object->trace_len; i++) {
@@ -330,6 +380,7 @@
object->comm, object->pid, object->jiffies);
pr_notice(" min_count = %d\n", object->min_count);
pr_notice(" count = %d\n", object->count);
+ pr_notice(" flags = 0x%lx\n", object->flags);
pr_notice(" backtrace:\n");
print_stack_trace(&trace, 4);
}
@@ -434,21 +485,36 @@
}
/*
+ * Save stack trace to the given array of MAX_TRACE size.
+ */
+static int __save_stack_trace(unsigned long *trace)
+{
+ struct stack_trace stack_trace;
+
+ stack_trace.max_entries = MAX_TRACE;
+ stack_trace.nr_entries = 0;
+ stack_trace.entries = trace;
+ stack_trace.skip = 2;
+ save_stack_trace(&stack_trace);
+
+ return stack_trace.nr_entries;
+}
+
+/*
* Create the metadata (struct kmemleak_object) corresponding to an allocated
* memory block and add it to the object_list and object_tree_root.
*/
-static void create_object(unsigned long ptr, size_t size, int min_count,
- gfp_t gfp)
+static struct kmemleak_object *create_object(unsigned long ptr, size_t size,
+ int min_count, gfp_t gfp)
{
unsigned long flags;
struct kmemleak_object *object;
struct prio_tree_node *node;
- struct stack_trace trace;
object = kmem_cache_alloc(object_cache, gfp & GFP_KMEMLEAK_MASK);
if (!object) {
kmemleak_stop("Cannot allocate a kmemleak_object structure\n");
- return;
+ return NULL;
}
INIT_LIST_HEAD(&object->object_list);
@@ -482,18 +548,14 @@
}
/* kernel backtrace */
- trace.max_entries = MAX_TRACE;
- trace.nr_entries = 0;
- trace.entries = object->trace;
- trace.skip = 1;
- save_stack_trace(&trace);
- object->trace_len = trace.nr_entries;
+ object->trace_len = __save_stack_trace(object->trace);
INIT_PRIO_TREE_NODE(&object->tree_node);
object->tree_node.start = ptr;
object->tree_node.last = ptr + size - 1;
write_lock_irqsave(&kmemleak_lock, flags);
+
min_addr = min(min_addr, ptr);
max_addr = max(max_addr, ptr + size);
node = prio_tree_insert(&object_tree_root, &object->tree_node);
@@ -504,20 +566,19 @@
* random memory blocks.
*/
if (node != &object->tree_node) {
- unsigned long flags;
-
kmemleak_stop("Cannot insert 0x%lx into the object search tree "
"(already existing)\n", ptr);
object = lookup_object(ptr, 1);
- spin_lock_irqsave(&object->lock, flags);
+ spin_lock(&object->lock);
dump_object_info(object);
- spin_unlock_irqrestore(&object->lock, flags);
+ spin_unlock(&object->lock);
goto out;
}
list_add_tail_rcu(&object->object_list, &object_list);
out:
write_unlock_irqrestore(&kmemleak_lock, flags);
+ return object;
}
/*
@@ -604,25 +665,46 @@
put_object(object);
}
+
+static void __paint_it(struct kmemleak_object *object, int color)
+{
+ object->min_count = color;
+ if (color == KMEMLEAK_BLACK)
+ object->flags |= OBJECT_NO_SCAN;
+}
+
+static void paint_it(struct kmemleak_object *object, int color)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&object->lock, flags);
+ __paint_it(object, color);
+ spin_unlock_irqrestore(&object->lock, flags);
+}
+
+static void paint_ptr(unsigned long ptr, int color)
+{
+ struct kmemleak_object *object;
+
+ object = find_and_get_object(ptr, 0);
+ if (!object) {
+ kmemleak_warn("Trying to color unknown object "
+ "at 0x%08lx as %s\n", ptr,
+ (color == KMEMLEAK_GREY) ? "Grey" :
+ (color == KMEMLEAK_BLACK) ? "Black" : "Unknown");
+ return;
+ }
+ paint_it(object, color);
+ put_object(object);
+}
+
/*
* Make a object permanently as gray-colored so that it can no longer be
* reported as a leak. This is used in general to mark a false positive.
*/
static void make_gray_object(unsigned long ptr)
{
- unsigned long flags;
- struct kmemleak_object *object;
-
- object = find_and_get_object(ptr, 0);
- if (!object) {
- kmemleak_warn("Graying unknown object at 0x%08lx\n", ptr);
- return;
- }
-
- spin_lock_irqsave(&object->lock, flags);
- object->min_count = 0;
- spin_unlock_irqrestore(&object->lock, flags);
- put_object(object);
+ paint_ptr(ptr, KMEMLEAK_GREY);
}
/*
@@ -631,19 +713,7 @@
*/
static void make_black_object(unsigned long ptr)
{
- unsigned long flags;
- struct kmemleak_object *object;
-
- object = find_and_get_object(ptr, 0);
- if (!object) {
- kmemleak_warn("Blacking unknown object at 0x%08lx\n", ptr);
- return;
- }
-
- spin_lock_irqsave(&object->lock, flags);
- object->min_count = -1;
- spin_unlock_irqrestore(&object->lock, flags);
- put_object(object);
+ paint_ptr(ptr, KMEMLEAK_BLACK);
}
/*
@@ -715,14 +785,15 @@
* Log an early kmemleak_* call to the early_log buffer. These calls will be
* processed later once kmemleak is fully initialized.
*/
-static void log_early(int op_type, const void *ptr, size_t size,
- int min_count, unsigned long offset, size_t length)
+static void __init log_early(int op_type, const void *ptr, size_t size,
+ int min_count, unsigned long offset, size_t length)
{
unsigned long flags;
struct early_log *log;
if (crt_early_log >= ARRAY_SIZE(early_log)) {
- pr_warning("Early log buffer exceeded\n");
+ pr_warning("Early log buffer exceeded, "
+ "please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n");
kmemleak_disable();
return;
}
@@ -739,16 +810,45 @@
log->min_count = min_count;
log->offset = offset;
log->length = length;
+ if (op_type == KMEMLEAK_ALLOC)
+ log->trace_len = __save_stack_trace(log->trace);
crt_early_log++;
local_irq_restore(flags);
}
/*
+ * Log an early allocated block and populate the stack trace.
+ */
+static void early_alloc(struct early_log *log)
+{
+ struct kmemleak_object *object;
+ unsigned long flags;
+ int i;
+
+ if (!atomic_read(&kmemleak_enabled) || !log->ptr || IS_ERR(log->ptr))
+ return;
+
+ /*
+ * RCU locking needed to ensure object is not freed via put_object().
+ */
+ rcu_read_lock();
+ object = create_object((unsigned long)log->ptr, log->size,
+ log->min_count, GFP_KERNEL);
+ spin_lock_irqsave(&object->lock, flags);
+ for (i = 0; i < log->trace_len; i++)
+ object->trace[i] = log->trace[i];
+ object->trace_len = log->trace_len;
+ spin_unlock_irqrestore(&object->lock, flags);
+ rcu_read_unlock();
+}
+
+/*
* Memory allocation function callback. This function is called from the
* kernel allocators when a new block is allocated (kmem_cache_alloc, kmalloc,
* vmalloc etc.).
*/
-void kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp)
+void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count,
+ gfp_t gfp)
{
pr_debug("%s(0x%p, %zu, %d)\n", __func__, ptr, size, min_count);
@@ -763,7 +863,7 @@
* Memory freeing function callback. This function is called from the kernel
* allocators when a block is freed (kmem_cache_free, kfree, vfree etc.).
*/
-void kmemleak_free(const void *ptr)
+void __ref kmemleak_free(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
@@ -778,7 +878,7 @@
* Partial memory freeing function callback. This function is usually called
* from bootmem allocator when (part of) a memory block is freed.
*/
-void kmemleak_free_part(const void *ptr, size_t size)
+void __ref kmemleak_free_part(const void *ptr, size_t size)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
@@ -793,7 +893,7 @@
* Mark an already allocated memory block as a false positive. This will cause
* the block to no longer be reported as leak and always be scanned.
*/
-void kmemleak_not_leak(const void *ptr)
+void __ref kmemleak_not_leak(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
@@ -809,7 +909,7 @@
* corresponding block is not a leak and does not contain any references to
* other allocated memory blocks.
*/
-void kmemleak_ignore(const void *ptr)
+void __ref kmemleak_ignore(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
@@ -823,8 +923,8 @@
/*
* Limit the range to be scanned in an allocated memory block.
*/
-void kmemleak_scan_area(const void *ptr, unsigned long offset, size_t length,
- gfp_t gfp)
+void __ref kmemleak_scan_area(const void *ptr, unsigned long offset,
+ size_t length, gfp_t gfp)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
@@ -838,7 +938,7 @@
/*
* Inform kmemleak not to scan the given memory block.
*/
-void kmemleak_no_scan(const void *ptr)
+void __ref kmemleak_no_scan(const void *ptr)
{
pr_debug("%s(0x%p)\n", __func__, ptr);
@@ -882,15 +982,22 @@
unsigned long *end = _end - (BYTES_PER_POINTER - 1);
for (ptr = start; ptr < end; ptr++) {
- unsigned long flags;
- unsigned long pointer = *ptr;
struct kmemleak_object *object;
+ unsigned long flags;
+ unsigned long pointer;
if (allow_resched)
cond_resched();
if (scan_should_stop())
break;
+ /* don't scan uninitialized memory */
+ if (!kmemcheck_is_obj_initialized((unsigned long)ptr,
+ BYTES_PER_POINTER))
+ continue;
+
+ pointer = *ptr;
+
object = find_and_get_object(pointer, 1);
if (!object)
continue;
@@ -949,10 +1056,21 @@
if (!(object->flags & OBJECT_ALLOCATED))
/* already freed object */
goto out;
- if (hlist_empty(&object->area_list))
- scan_block((void *)object->pointer,
- (void *)(object->pointer + object->size), object, 0);
- else
+ if (hlist_empty(&object->area_list)) {
+ void *start = (void *)object->pointer;
+ void *end = (void *)(object->pointer + object->size);
+
+ while (start < end && (object->flags & OBJECT_ALLOCATED) &&
+ !(object->flags & OBJECT_NO_SCAN)) {
+ scan_block(start, min(start + MAX_SCAN_SIZE, end),
+ object, 0);
+ start += MAX_SCAN_SIZE;
+
+ spin_unlock_irqrestore(&object->lock, flags);
+ cond_resched();
+ spin_lock_irqsave(&object->lock, flags);
+ }
+ } else
hlist_for_each_entry(area, elem, &object->area_list, node)
scan_block((void *)(object->pointer + area->offset),
(void *)(object->pointer + area->offset
@@ -970,7 +1088,6 @@
{
unsigned long flags;
struct kmemleak_object *object, *tmp;
- struct task_struct *task;
int i;
int new_leaks = 0;
int gray_list_pass = 0;
@@ -1037,15 +1154,16 @@
}
/*
- * Scanning the task stacks may introduce false negatives and it is
- * not enabled by default.
+ * Scanning the task stacks (may introduce false negatives).
*/
if (kmemleak_stack_scan) {
+ struct task_struct *p, *g;
+
read_lock(&tasklist_lock);
- for_each_process(task)
- scan_block(task_stack_page(task),
- task_stack_page(task) + THREAD_SIZE,
- NULL, 0);
+ do_each_thread(g, p) {
+ scan_block(task_stack_page(p), task_stack_page(p) +
+ THREAD_SIZE, NULL, 0);
+ } while_each_thread(g, p);
read_unlock(&tasklist_lock);
}
@@ -1170,7 +1288,7 @@
* Start the automatic memory scanning thread. This function must be called
* with the scan_mutex held.
*/
-void start_scan_thread(void)
+static void start_scan_thread(void)
{
if (scan_thread)
return;
@@ -1185,7 +1303,7 @@
* Stop the automatic memory scanning thread. This function must be called
* with the scan_mutex held.
*/
-void stop_scan_thread(void)
+static void stop_scan_thread(void)
{
if (scan_thread) {
kthread_stop(scan_thread);
@@ -1294,6 +1412,49 @@
return seq_release(inode, file);
}
+static int dump_str_object_info(const char *str)
+{
+ unsigned long flags;
+ struct kmemleak_object *object;
+ unsigned long addr;
+
+ addr= simple_strtoul(str, NULL, 0);
+ object = find_and_get_object(addr, 0);
+ if (!object) {
+ pr_info("Unknown object at 0x%08lx\n", addr);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&object->lock, flags);
+ dump_object_info(object);
+ spin_unlock_irqrestore(&object->lock, flags);
+
+ put_object(object);
+ return 0;
+}
+
+/*
+ * We use grey instead of black to ensure we can do future scans on the same
+ * objects. If we did not do future scans these black objects could
+ * potentially contain references to newly allocated objects in the future and
+ * we'd end up with false positives.
+ */
+static void kmemleak_clear(void)
+{
+ struct kmemleak_object *object;
+ unsigned long flags;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(object, &object_list, object_list) {
+ spin_lock_irqsave(&object->lock, flags);
+ if ((object->flags & OBJECT_REPORTED) &&
+ unreferenced_object(object))
+ __paint_it(object, KMEMLEAK_GREY);
+ spin_unlock_irqrestore(&object->lock, flags);
+ }
+ rcu_read_unlock();
+}
+
/*
* File write operation to configure kmemleak at run-time. The following
* commands can be written to the /sys/kernel/debug/kmemleak file:
@@ -1305,6 +1466,9 @@
* scan=... - set the automatic memory scanning period in seconds (0 to
* disable it)
* scan - trigger a memory scan
+ * clear - mark all current reported unreferenced kmemleak objects as
+ * grey to ignore printing them
+ * dump=... - dump information about the object found at the given address
*/
static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
size_t size, loff_t *ppos)
@@ -1345,6 +1509,10 @@
}
} else if (strncmp(buf, "scan", 4) == 0)
kmemleak_scan();
+ else if (strncmp(buf, "clear", 5) == 0)
+ kmemleak_clear();
+ else if (strncmp(buf, "dump=", 5) == 0)
+ ret = dump_str_object_info(buf + 5);
else
ret = -EINVAL;
@@ -1371,7 +1539,7 @@
* Perform the freeing of the kmemleak internal objects after waiting for any
* current memory scan to complete.
*/
-static int kmemleak_cleanup_thread(void *arg)
+static void kmemleak_do_cleanup(struct work_struct *work)
{
struct kmemleak_object *object;
@@ -1383,22 +1551,9 @@
delete_object_full(object->pointer);
rcu_read_unlock();
mutex_unlock(&scan_mutex);
-
- return 0;
}
-/*
- * Start the clean-up thread.
- */
-static void kmemleak_cleanup(void)
-{
- struct task_struct *cleanup_thread;
-
- cleanup_thread = kthread_run(kmemleak_cleanup_thread, NULL,
- "kmemleak-clean");
- if (IS_ERR(cleanup_thread))
- pr_warning("Failed to create the clean-up thread\n");
-}
+static DECLARE_WORK(cleanup_work, kmemleak_do_cleanup);
/*
* Disable kmemleak. No memory allocation/freeing will be traced once this
@@ -1416,7 +1571,7 @@
/* check whether it is too early for a kernel thread */
if (atomic_read(&kmemleak_initialized))
- kmemleak_cleanup();
+ schedule_work(&cleanup_work);
pr_info("Kernel memory leak detector disabled\n");
}
@@ -1469,8 +1624,7 @@
switch (log->op_type) {
case KMEMLEAK_ALLOC:
- kmemleak_alloc(log->ptr, log->size, log->min_count,
- GFP_KERNEL);
+ early_alloc(log);
break;
case KMEMLEAK_FREE:
kmemleak_free(log->ptr);
@@ -1513,7 +1667,7 @@
* after setting kmemleak_initialized and we may end up with
* two clean-up threads but serialized by scan_mutex.
*/
- kmemleak_cleanup();
+ schedule_work(&cleanup_work);
return -ENOMEM;
}
diff --git a/mm/nommu.c b/mm/nommu.c
index 4bde489..66e81e7 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1352,6 +1352,7 @@
}
vma->vm_region = region;
+ add_nommu_region(region);
/* set up the mapping */
if (file && vma->vm_flags & VM_SHARED)
@@ -1361,8 +1362,6 @@
if (ret < 0)
goto error_put_region;
- add_nommu_region(region);
-
/* okay... we have a mapping; now we have to register it */
result = vma->vm_start;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 81627eb..25e7770 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -36,15 +36,6 @@
#include <linux/pagevec.h>
/*
- * The maximum number of pages to writeout in a single bdflush/kupdate
- * operation. We do this so we don't hold I_SYNC against an inode for
- * enormous amounts of time, which would block a userspace task which has
- * been forced to throttle against that inode. Also, the code reevaluates
- * the dirty each time it has written this many pages.
- */
-#define MAX_WRITEBACK_PAGES 1024
-
-/*
* After a CPU has dirtied this many pages, balance_dirty_pages_ratelimited
* will look to see if it needs to force writeback or throttling.
*/
@@ -117,8 +108,6 @@
/* End of sysctl-exported parameters */
-static void background_writeout(unsigned long _min_pages);
-
/*
* Scale the writeback cache size proportional to the relative writeout speeds.
*
@@ -320,15 +309,13 @@
/*
*
*/
-static DEFINE_SPINLOCK(bdi_lock);
static unsigned int bdi_min_ratio;
int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio)
{
int ret = 0;
- unsigned long flags;
- spin_lock_irqsave(&bdi_lock, flags);
+ spin_lock(&bdi_lock);
if (min_ratio > bdi->max_ratio) {
ret = -EINVAL;
} else {
@@ -340,27 +327,26 @@
ret = -EINVAL;
}
}
- spin_unlock_irqrestore(&bdi_lock, flags);
+ spin_unlock(&bdi_lock);
return ret;
}
int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned max_ratio)
{
- unsigned long flags;
int ret = 0;
if (max_ratio > 100)
return -EINVAL;
- spin_lock_irqsave(&bdi_lock, flags);
+ spin_lock(&bdi_lock);
if (bdi->min_ratio > max_ratio) {
ret = -EINVAL;
} else {
bdi->max_ratio = max_ratio;
bdi->max_prop_frac = (PROP_FRAC_BASE * max_ratio) / 100;
}
- spin_unlock_irqrestore(&bdi_lock, flags);
+ spin_unlock(&bdi_lock);
return ret;
}
@@ -546,7 +532,7 @@
* up.
*/
if (bdi_nr_reclaimable > bdi_thresh) {
- writeback_inodes(&wbc);
+ writeback_inodes_wbc(&wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
&bdi_thresh, bdi);
@@ -575,7 +561,7 @@
if (pages_written >= write_chunk)
break; /* We've done our duty */
- congestion_wait(BLK_RW_ASYNC, HZ/10);
+ schedule_timeout(1);
}
if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
@@ -594,10 +580,18 @@
* background_thresh, to keep the amount of dirty memory low.
*/
if ((laptop_mode && pages_written) ||
- (!laptop_mode && (global_page_state(NR_FILE_DIRTY)
- + global_page_state(NR_UNSTABLE_NFS)
- > background_thresh)))
- pdflush_operation(background_writeout, 0);
+ (!laptop_mode && ((nr_writeback = global_page_state(NR_FILE_DIRTY)
+ + global_page_state(NR_UNSTABLE_NFS))
+ > background_thresh))) {
+ struct writeback_control wbc = {
+ .bdi = bdi,
+ .sync_mode = WB_SYNC_NONE,
+ .nr_to_write = nr_writeback,
+ };
+
+
+ bdi_start_writeback(&wbc);
+ }
}
void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -681,153 +675,35 @@
}
}
-/*
- * writeback at least _min_pages, and keep writing until the amount of dirty
- * memory is less than the background threshold, or until we're all clean.
- */
-static void background_writeout(unsigned long _min_pages)
-{
- long min_pages = _min_pages;
- struct writeback_control wbc = {
- .bdi = NULL,
- .sync_mode = WB_SYNC_NONE,
- .older_than_this = NULL,
- .nr_to_write = 0,
- .nonblocking = 1,
- .range_cyclic = 1,
- };
-
- for ( ; ; ) {
- unsigned long background_thresh;
- unsigned long dirty_thresh;
-
- get_dirty_limits(&background_thresh, &dirty_thresh, NULL, NULL);
- if (global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) < background_thresh
- && min_pages <= 0)
- break;
- wbc.more_io = 0;
- wbc.encountered_congestion = 0;
- wbc.nr_to_write = MAX_WRITEBACK_PAGES;
- wbc.pages_skipped = 0;
- writeback_inodes(&wbc);
- min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
- if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
- /* Wrote less than expected */
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(BLK_RW_ASYNC, HZ/10);
- else
- break;
- }
- }
-}
-
-/*
- * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
- * the whole world. Returns 0 if a pdflush thread was dispatched. Returns
- * -1 if all pdflush threads were busy.
- */
-int wakeup_pdflush(long nr_pages)
-{
- if (nr_pages == 0)
- nr_pages = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS);
- return pdflush_operation(background_writeout, nr_pages);
-}
-
-static void wb_timer_fn(unsigned long unused);
static void laptop_timer_fn(unsigned long unused);
-static DEFINE_TIMER(wb_timer, wb_timer_fn, 0, 0);
static DEFINE_TIMER(laptop_mode_wb_timer, laptop_timer_fn, 0, 0);
/*
- * Periodic writeback of "old" data.
- *
- * Define "old": the first time one of an inode's pages is dirtied, we mark the
- * dirtying-time in the inode's address_space. So this periodic writeback code
- * just walks the superblock inode list, writing back any inodes which are
- * older than a specific point in time.
- *
- * Try to run once per dirty_writeback_interval. But if a writeback event
- * takes longer than a dirty_writeback_interval interval, then leave a
- * one-second gap.
- *
- * older_than_this takes precedence over nr_to_write. So we'll only write back
- * all dirty pages if they are all attached to "old" mappings.
- */
-static void wb_kupdate(unsigned long arg)
-{
- unsigned long oldest_jif;
- unsigned long start_jif;
- unsigned long next_jif;
- long nr_to_write;
- struct writeback_control wbc = {
- .bdi = NULL,
- .sync_mode = WB_SYNC_NONE,
- .older_than_this = &oldest_jif,
- .nr_to_write = 0,
- .nonblocking = 1,
- .for_kupdate = 1,
- .range_cyclic = 1,
- };
-
- sync_supers();
-
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
- start_jif = jiffies;
- next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
- nr_to_write = global_page_state(NR_FILE_DIRTY) +
- global_page_state(NR_UNSTABLE_NFS) +
- (inodes_stat.nr_inodes - inodes_stat.nr_unused);
- while (nr_to_write > 0) {
- wbc.more_io = 0;
- wbc.encountered_congestion = 0;
- wbc.nr_to_write = MAX_WRITEBACK_PAGES;
- writeback_inodes(&wbc);
- if (wbc.nr_to_write > 0) {
- if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(BLK_RW_ASYNC, HZ/10);
- else
- break; /* All the old data is written */
- }
- nr_to_write -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
- }
- if (time_before(next_jif, jiffies + HZ))
- next_jif = jiffies + HZ;
- if (dirty_writeback_interval)
- mod_timer(&wb_timer, next_jif);
-}
-
-/*
* sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
*/
int dirty_writeback_centisecs_handler(ctl_table *table, int write,
struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
{
proc_dointvec(table, write, file, buffer, length, ppos);
- if (dirty_writeback_interval)
- mod_timer(&wb_timer, jiffies +
- msecs_to_jiffies(dirty_writeback_interval * 10));
- else
- del_timer(&wb_timer);
return 0;
}
-static void wb_timer_fn(unsigned long unused)
+static void do_laptop_sync(struct work_struct *work)
{
- if (pdflush_operation(wb_kupdate, 0) < 0)
- mod_timer(&wb_timer, jiffies + HZ); /* delay 1 second */
-}
-
-static void laptop_flush(unsigned long unused)
-{
- sys_sync();
+ wakeup_flusher_threads(0);
+ kfree(work);
}
static void laptop_timer_fn(unsigned long unused)
{
- pdflush_operation(laptop_flush, 0);
+ struct work_struct *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work) {
+ INIT_WORK(work, do_laptop_sync);
+ schedule_work(work);
+ }
}
/*
@@ -910,8 +786,6 @@
{
int shift;
- mod_timer(&wb_timer,
- jiffies + msecs_to_jiffies(dirty_writeback_interval * 10));
writeback_set_ratelimit();
register_cpu_notifier(&ratelimit_nb);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5cc986e..a0de15f 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -817,13 +817,15 @@
* agressive about taking ownership of free pages
*/
if (unlikely(current_order >= (pageblock_order >> 1)) ||
- start_migratetype == MIGRATE_RECLAIMABLE) {
+ start_migratetype == MIGRATE_RECLAIMABLE ||
+ page_group_by_mobility_disabled) {
unsigned long pages;
pages = move_freepages_block(zone, page,
start_migratetype);
/* Claim the whole block if over half of it is free */
- if (pages >= (1 << (pageblock_order-1)))
+ if (pages >= (1 << (pageblock_order-1)) ||
+ page_group_by_mobility_disabled)
set_pageblock_migratetype(page,
start_migratetype);
diff --git a/mm/pdflush.c b/mm/pdflush.c
deleted file mode 100644
index 235ac44..0000000
--- a/mm/pdflush.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * mm/pdflush.c - worker threads for writing back filesystem data
- *
- * Copyright (C) 2002, Linus Torvalds.
- *
- * 09Apr2002 Andrew Morton
- * Initial version
- * 29Feb2004 kaos@sgi.com
- * Move worker thread creation to kthread to avoid chewing
- * up stack space with nested calls to kernel_thread.
- */
-
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/signal.h>
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/fs.h> /* Needed by writeback.h */
-#include <linux/writeback.h> /* Prototypes pdflush_operation() */
-#include <linux/kthread.h>
-#include <linux/cpuset.h>
-#include <linux/freezer.h>
-
-
-/*
- * Minimum and maximum number of pdflush instances
- */
-#define MIN_PDFLUSH_THREADS 2
-#define MAX_PDFLUSH_THREADS 8
-
-static void start_one_pdflush_thread(void);
-
-
-/*
- * The pdflush threads are worker threads for writing back dirty data.
- * Ideally, we'd like one thread per active disk spindle. But the disk
- * topology is very hard to divine at this level. Instead, we take
- * care in various places to prevent more than one pdflush thread from
- * performing writeback against a single filesystem. pdflush threads
- * have the PF_FLUSHER flag set in current->flags to aid in this.
- */
-
-/*
- * All the pdflush threads. Protected by pdflush_lock
- */
-static LIST_HEAD(pdflush_list);
-static DEFINE_SPINLOCK(pdflush_lock);
-
-/*
- * The count of currently-running pdflush threads. Protected
- * by pdflush_lock.
- *
- * Readable by sysctl, but not writable. Published to userspace at
- * /proc/sys/vm/nr_pdflush_threads.
- */
-int nr_pdflush_threads = 0;
-
-/*
- * The time at which the pdflush thread pool last went empty
- */
-static unsigned long last_empty_jifs;
-
-/*
- * The pdflush thread.
- *
- * Thread pool management algorithm:
- *
- * - The minimum and maximum number of pdflush instances are bound
- * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
- *
- * - If there have been no idle pdflush instances for 1 second, create
- * a new one.
- *
- * - If the least-recently-went-to-sleep pdflush thread has been asleep
- * for more than one second, terminate a thread.
- */
-
-/*
- * A structure for passing work to a pdflush thread. Also for passing
- * state information between pdflush threads. Protected by pdflush_lock.
- */
-struct pdflush_work {
- struct task_struct *who; /* The thread */
- void (*fn)(unsigned long); /* A callback function */
- unsigned long arg0; /* An argument to the callback */
- struct list_head list; /* On pdflush_list, when idle */
- unsigned long when_i_went_to_sleep;
-};
-
-static int __pdflush(struct pdflush_work *my_work)
-{
- current->flags |= PF_FLUSHER | PF_SWAPWRITE;
- set_freezable();
- my_work->fn = NULL;
- my_work->who = current;
- INIT_LIST_HEAD(&my_work->list);
-
- spin_lock_irq(&pdflush_lock);
- for ( ; ; ) {
- struct pdflush_work *pdf;
-
- set_current_state(TASK_INTERRUPTIBLE);
- list_move(&my_work->list, &pdflush_list);
- my_work->when_i_went_to_sleep = jiffies;
- spin_unlock_irq(&pdflush_lock);
- schedule();
- try_to_freeze();
- spin_lock_irq(&pdflush_lock);
- if (!list_empty(&my_work->list)) {
- /*
- * Someone woke us up, but without removing our control
- * structure from the global list. swsusp will do this
- * in try_to_freeze()->refrigerator(). Handle it.
- */
- my_work->fn = NULL;
- continue;
- }
- if (my_work->fn == NULL) {
- printk("pdflush: bogus wakeup\n");
- continue;
- }
- spin_unlock_irq(&pdflush_lock);
-
- (*my_work->fn)(my_work->arg0);
-
- spin_lock_irq(&pdflush_lock);
-
- /*
- * Thread creation: For how long have there been zero
- * available threads?
- *
- * To throttle creation, we reset last_empty_jifs.
- */
- if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
- if (list_empty(&pdflush_list)) {
- if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
- last_empty_jifs = jiffies;
- nr_pdflush_threads++;
- spin_unlock_irq(&pdflush_lock);
- start_one_pdflush_thread();
- spin_lock_irq(&pdflush_lock);
- }
- }
- }
-
- my_work->fn = NULL;
-
- /*
- * Thread destruction: For how long has the sleepiest
- * thread slept?
- */
- if (list_empty(&pdflush_list))
- continue;
- if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
- continue;
- pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
- if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
- /* Limit exit rate */
- pdf->when_i_went_to_sleep = jiffies;
- break; /* exeunt */
- }
- }
- nr_pdflush_threads--;
- spin_unlock_irq(&pdflush_lock);
- return 0;
-}
-
-/*
- * Of course, my_work wants to be just a local in __pdflush(). It is
- * separated out in this manner to hopefully prevent the compiler from
- * performing unfortunate optimisations against the auto variables. Because
- * these are visible to other tasks and CPUs. (No problem has actually
- * been observed. This is just paranoia).
- */
-static int pdflush(void *dummy)
-{
- struct pdflush_work my_work;
- cpumask_var_t cpus_allowed;
-
- /*
- * Since the caller doesn't even check kthread_run() worked, let's not
- * freak out too much if this fails.
- */
- if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
- printk(KERN_WARNING "pdflush failed to allocate cpumask\n");
- return 0;
- }
-
- /*
- * pdflush can spend a lot of time doing encryption via dm-crypt. We
- * don't want to do that at keventd's priority.
- */
- set_user_nice(current, 0);
-
- /*
- * Some configs put our parent kthread in a limited cpuset,
- * which kthread() overrides, forcing cpus_allowed == cpu_all_mask.
- * Our needs are more modest - cut back to our cpusets cpus_allowed.
- * This is needed as pdflush's are dynamically created and destroyed.
- * The boottime pdflush's are easily placed w/o these 2 lines.
- */
- cpuset_cpus_allowed(current, cpus_allowed);
- set_cpus_allowed_ptr(current, cpus_allowed);
- free_cpumask_var(cpus_allowed);
-
- return __pdflush(&my_work);
-}
-
-/*
- * Attempt to wake up a pdflush thread, and get it to do some work for you.
- * Returns zero if it indeed managed to find a worker thread, and passed your
- * payload to it.
- */
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0)
-{
- unsigned long flags;
- int ret = 0;
-
- BUG_ON(fn == NULL); /* Hard to diagnose if it's deferred */
-
- spin_lock_irqsave(&pdflush_lock, flags);
- if (list_empty(&pdflush_list)) {
- ret = -1;
- } else {
- struct pdflush_work *pdf;
-
- pdf = list_entry(pdflush_list.next, struct pdflush_work, list);
- list_del_init(&pdf->list);
- if (list_empty(&pdflush_list))
- last_empty_jifs = jiffies;
- pdf->fn = fn;
- pdf->arg0 = arg0;
- wake_up_process(pdf->who);
- }
- spin_unlock_irqrestore(&pdflush_lock, flags);
-
- return ret;
-}
-
-static void start_one_pdflush_thread(void)
-{
- struct task_struct *k;
-
- k = kthread_run(pdflush, NULL, "pdflush");
- if (unlikely(IS_ERR(k))) {
- spin_lock_irq(&pdflush_lock);
- nr_pdflush_threads--;
- spin_unlock_irq(&pdflush_lock);
- }
-}
-
-static int __init pdflush_init(void)
-{
- int i;
-
- /*
- * Pre-set nr_pdflush_threads... If we fail to create,
- * the count will be decremented.
- */
- nr_pdflush_threads = MIN_PDFLUSH_THREADS;
-
- for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
- start_one_pdflush_thread();
- return 0;
-}
-
-module_init(pdflush_init);
diff --git a/mm/percpu.c b/mm/percpu.c
index 5fe3784..3311c89 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -197,7 +197,12 @@
static bool pcpu_chunk_page_occupied(struct pcpu_chunk *chunk,
int page_idx)
{
- return *pcpu_chunk_pagep(chunk, 0, page_idx) != NULL;
+ /*
+ * Any possible cpu id can be used here, so there's no need to
+ * worry about preemption or cpu hotplug.
+ */
+ return *pcpu_chunk_pagep(chunk, raw_smp_processor_id(),
+ page_idx) != NULL;
}
/* set the pointer to a chunk in a page struct */
@@ -297,6 +302,14 @@
return pcpu_first_chunk;
}
+ /*
+ * The address is relative to unit0 which might be unused and
+ * thus unmapped. Offset the address to the unit space of the
+ * current processor before looking it up in the vmalloc
+ * space. Note that any possible cpu id can be used here, so
+ * there's no need to worry about preemption or cpu hotplug.
+ */
+ addr += raw_smp_processor_id() * pcpu_unit_size;
return pcpu_get_page_chunk(vmalloc_to_page(addr));
}
diff --git a/mm/rmap.c b/mm/rmap.c
index 836c6c6..0895b5c 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -358,6 +358,7 @@
*/
if (vma->vm_flags & VM_LOCKED) {
*mapcount = 1; /* break early from loop */
+ *vm_flags |= VM_LOCKED;
goto out_unmap;
}
diff --git a/mm/shmem.c b/mm/shmem.c
index d713239..5a0b3d4 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2446,7 +2446,7 @@
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
- .permission = shmem_permission,
+ .check_acl = shmem_check_acl,
#endif
};
@@ -2469,7 +2469,7 @@
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
- .permission = shmem_permission,
+ .check_acl = shmem_check_acl,
#endif
};
@@ -2480,7 +2480,7 @@
.getxattr = generic_getxattr,
.listxattr = generic_listxattr,
.removexattr = generic_removexattr,
- .permission = shmem_permission,
+ .check_acl = shmem_check_acl,
#endif
};
diff --git a/mm/shmem_acl.c b/mm/shmem_acl.c
index 606a8e7..df2c87f 100644
--- a/mm/shmem_acl.c
+++ b/mm/shmem_acl.c
@@ -157,7 +157,7 @@
/**
* shmem_check_acl - check_acl() callback for generic_permission()
*/
-static int
+int
shmem_check_acl(struct inode *inode, int mask)
{
struct posix_acl *acl = shmem_get_acl(inode, ACL_TYPE_ACCESS);
@@ -169,12 +169,3 @@
}
return -EAGAIN;
}
-
-/**
- * shmem_permission - permission() inode operation
- */
-int
-shmem_permission(struct inode *inode, int mask)
-{
- return generic_permission(inode, mask, shmem_check_acl);
-}
diff --git a/mm/slob.c b/mm/slob.c
index 9641da3..837ebd6 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -692,3 +692,8 @@
{
slob_ready = 1;
}
+
+void __init kmem_cache_init_late(void)
+{
+ /* Nothing to do */
+}
diff --git a/mm/slub.c b/mm/slub.c
index b9f1491..417ed84 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -141,6 +141,13 @@
SLAB_POISON | SLAB_STORE_USER)
/*
+ * Debugging flags that require metadata to be stored in the slab. These get
+ * disabled when slub_debug=O is used and a cache's min order increases with
+ * metadata.
+ */
+#define DEBUG_METADATA_FLAGS (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER)
+
+/*
* Set of flags that will prevent slab merging
*/
#define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
@@ -325,6 +332,7 @@
#endif
static char *slub_debug_slabs;
+static int disable_higher_order_debug;
/*
* Object debugging
@@ -646,7 +654,7 @@
slab_err(s, page, "Padding overwritten. 0x%p-0x%p", fault, end - 1);
print_section("Padding", end - remainder, remainder);
- restore_bytes(s, "slab padding", POISON_INUSE, start, end);
+ restore_bytes(s, "slab padding", POISON_INUSE, end - remainder, end);
return 0;
}
@@ -976,6 +984,15 @@
*/
goto check_slabs;
+ if (tolower(*str) == 'o') {
+ /*
+ * Avoid enabling debugging on caches if its minimum order
+ * would increase as a result.
+ */
+ disable_higher_order_debug = 1;
+ goto out;
+ }
+
slub_debug = 0;
if (*str == '-')
/*
@@ -1026,8 +1043,8 @@
* Enable debugging if selected on the kernel commandline.
*/
if (slub_debug && (!slub_debug_slabs ||
- strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs)) == 0))
- flags |= slub_debug;
+ !strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs))))
+ flags |= slub_debug;
return flags;
}
@@ -1109,8 +1126,7 @@
}
if (kmemcheck_enabled
- && !(s->flags & (SLAB_NOTRACK | DEBUG_DEFAULT_FLAGS)))
- {
+ && !(s->flags & (SLAB_NOTRACK | DEBUG_DEFAULT_FLAGS))) {
int pages = 1 << oo_order(oo);
kmemcheck_alloc_shadow(page, oo_order(oo), flags, node);
@@ -1560,6 +1576,10 @@
"default order: %d, min order: %d\n", s->name, s->objsize,
s->size, oo_order(s->oo), oo_order(s->min));
+ if (oo_order(s->min) > get_order(s->objsize))
+ printk(KERN_WARNING " %s debugging increased min order, use "
+ "slub_debug=O to disable.\n", s->name);
+
for_each_online_node(node) {
struct kmem_cache_node *n = get_node(s, node);
unsigned long nr_slabs;
@@ -2001,7 +2021,7 @@
return order;
fraction /= 2;
}
- min_objects --;
+ min_objects--;
}
/*
@@ -2400,6 +2420,7 @@
* on bootup.
*/
align = calculate_alignment(flags, align, s->objsize);
+ s->align = align;
/*
* SLUB stores one object immediately after another beginning from
@@ -2452,6 +2473,18 @@
if (!calculate_sizes(s, -1))
goto error;
+ if (disable_higher_order_debug) {
+ /*
+ * Disable debugging flags that store metadata if the min slab
+ * order increased.
+ */
+ if (get_order(s->size) > get_order(s->objsize)) {
+ s->flags &= ~DEBUG_METADATA_FLAGS;
+ s->offset = 0;
+ if (!calculate_sizes(s, -1))
+ goto error;
+ }
+ }
/*
* The larger the object size is, the more pages we want on the partial
@@ -2594,8 +2627,6 @@
*/
void kmem_cache_destroy(struct kmem_cache *s)
{
- if (s->flags & SLAB_DESTROY_BY_RCU)
- rcu_barrier();
down_write(&slub_lock);
s->refcount--;
if (!s->refcount) {
@@ -2606,6 +2637,8 @@
"still has objects.\n", s->name, __func__);
dump_stack();
}
+ if (s->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
sysfs_slab_remove(s);
} else
up_write(&slub_lock);
@@ -2790,6 +2823,11 @@
2 /* 192 */
};
+static inline int size_index_elem(size_t bytes)
+{
+ return (bytes - 1) / 8;
+}
+
static struct kmem_cache *get_slab(size_t size, gfp_t flags)
{
int index;
@@ -2798,7 +2836,7 @@
if (!size)
return ZERO_SIZE_PTR;
- index = size_index[(size - 1) / 8];
+ index = size_index[size_index_elem(size)];
} else
index = fls(size - 1);
@@ -3156,10 +3194,12 @@
slab_state = PARTIAL;
/* Caches that are not of the two-to-the-power-of size */
- if (KMALLOC_MIN_SIZE <= 64) {
+ if (KMALLOC_MIN_SIZE <= 32) {
create_kmalloc_cache(&kmalloc_caches[1],
"kmalloc-96", 96, GFP_NOWAIT);
caches++;
+ }
+ if (KMALLOC_MIN_SIZE <= 64) {
create_kmalloc_cache(&kmalloc_caches[2],
"kmalloc-192", 192, GFP_NOWAIT);
caches++;
@@ -3186,17 +3226,28 @@
BUILD_BUG_ON(KMALLOC_MIN_SIZE > 256 ||
(KMALLOC_MIN_SIZE & (KMALLOC_MIN_SIZE - 1)));
- for (i = 8; i < KMALLOC_MIN_SIZE; i += 8)
- size_index[(i - 1) / 8] = KMALLOC_SHIFT_LOW;
+ for (i = 8; i < KMALLOC_MIN_SIZE; i += 8) {
+ int elem = size_index_elem(i);
+ if (elem >= ARRAY_SIZE(size_index))
+ break;
+ size_index[elem] = KMALLOC_SHIFT_LOW;
+ }
- if (KMALLOC_MIN_SIZE == 128) {
+ if (KMALLOC_MIN_SIZE == 64) {
+ /*
+ * The 96 byte size cache is not used if the alignment
+ * is 64 byte.
+ */
+ for (i = 64 + 8; i <= 96; i += 8)
+ size_index[size_index_elem(i)] = 7;
+ } else if (KMALLOC_MIN_SIZE == 128) {
/*
* The 192 byte sized cache is not used if the alignment
* is 128 byte. Redirect kmalloc to use the 256 byte cache
* instead.
*/
for (i = 128 + 8; i <= 192; i += 8)
- size_index[(i - 1) / 8] = 8;
+ size_index[size_index_elem(i)] = 8;
}
slab_state = UP;
@@ -4543,8 +4594,11 @@
}
err = sysfs_create_group(&s->kobj, &slab_attr_group);
- if (err)
+ if (err) {
+ kobject_del(&s->kobj);
+ kobject_put(&s->kobj);
return err;
+ }
kobject_uevent(&s->kobj, KOBJ_ADD);
if (!unmergeable) {
/* Setup first alias */
@@ -4726,7 +4780,7 @@
static int __init slab_proc_init(void)
{
- proc_create("slabinfo",S_IWUSR|S_IRUGO,NULL,&proc_slabinfo_operations);
+ proc_create("slabinfo", S_IRUGO, NULL, &proc_slabinfo_operations);
return 0;
}
module_init(slab_proc_init);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 42cd38e..5ae6b8b 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -34,6 +34,7 @@
};
static struct backing_dev_info swap_backing_dev_info = {
+ .name = "swap",
.capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_SWAP_BACKED,
.unplug_io_fn = swap_unplug_io_fn,
};
diff --git a/mm/vmscan.c b/mm/vmscan.c
index dea7abd..ba8228e 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -630,9 +630,14 @@
referenced = page_referenced(page, 1,
sc->mem_cgroup, &vm_flags);
- /* In active use or really unfreeable? Activate it. */
+ /*
+ * In active use or really unfreeable? Activate it.
+ * If page which have PG_mlocked lost isoltation race,
+ * try_to_unmap moves it to unevictable list
+ */
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
- referenced && page_mapping_inuse(page))
+ referenced && page_mapping_inuse(page)
+ && !(vm_flags & VM_LOCKED))
goto activate_locked;
/*
@@ -1715,7 +1720,7 @@
*/
if (total_scanned > sc->swap_cluster_max +
sc->swap_cluster_max / 2) {
- wakeup_pdflush(laptop_mode ? 0 : total_scanned);
+ wakeup_flusher_threads(laptop_mode ? 0 : total_scanned);
sc->may_writepage = 1;
}
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index fe64908..8836575 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -225,12 +225,6 @@
return -EOPNOTSUPP;
}
- /* The real device must be up and operating in order to
- * assosciate a VLAN device with it.
- */
- if (!(real_dev->flags & IFF_UP))
- return -ENETDOWN;
-
if (__find_vlan_dev(real_dev, vlan_id) != NULL)
return -EEXIST;
@@ -336,12 +330,13 @@
snprintf(name, IFNAMSIZ, "vlan%.4i", vlan_id);
}
- new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name,
- vlan_setup);
+ new_dev = alloc_netdev_mq(sizeof(struct vlan_dev_info), name,
+ vlan_setup, real_dev->num_tx_queues);
if (new_dev == NULL)
return -ENOBUFS;
+ new_dev->real_num_tx_queues = real_dev->real_num_tx_queues;
dev_net_set(new_dev, net);
/* need 4 bytes for extra VLAN header info,
* hope the underlying device can handle it.
@@ -397,6 +392,9 @@
vlandev->features &= ~dev->vlan_features;
vlandev->features |= dev->features & dev->vlan_features;
vlandev->gso_max_size = dev->gso_max_size;
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
+#endif
if (old_features != vlandev->features)
netdev_features_change(vlandev);
@@ -468,6 +466,19 @@
}
break;
+ case NETDEV_CHANGEMTU:
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = vlan_group_get_device(grp, i);
+ if (!vlandev)
+ continue;
+
+ if (vlandev->mtu <= dev->mtu)
+ continue;
+
+ dev_set_mtu(vlandev, dev->mtu);
+ }
+ break;
+
case NETDEV_FEAT_CHANGE:
/* Propagate device features to underlying device */
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 96bad8f..4198ec5 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -288,10 +288,14 @@
return rc;
}
-static int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
- struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
+ int i = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
+ unsigned int len;
+ int ret;
/* Handle non-VLAN frames if they are sent to us, for example by DHCP.
*
@@ -317,29 +321,43 @@
vlan_dev_info(dev)->cnt_inc_headroom_on_tx++;
}
- txq->tx_packets++;
- txq->tx_bytes += skb->len;
skb->dev = vlan_dev_info(dev)->real_dev;
- dev_queue_xmit(skb);
+ len = skb->len;
+ ret = dev_queue_xmit(skb);
+
+ if (likely(ret == NET_XMIT_SUCCESS)) {
+ txq->tx_packets++;
+ txq->tx_bytes += len;
+ } else
+ txq->tx_dropped++;
+
return NETDEV_TX_OK;
}
-static int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
- struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
+ int i = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
u16 vlan_tci;
+ unsigned int len;
+ int ret;
vlan_tci = vlan_dev_info(dev)->vlan_id;
vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
- txq->tx_packets++;
- txq->tx_bytes += skb->len;
-
skb->dev = vlan_dev_info(dev)->real_dev;
- dev_queue_xmit(skb);
+ len = skb->len;
+ ret = dev_queue_xmit(skb);
+
+ if (likely(ret == NET_XMIT_SUCCESS)) {
+ txq->tx_packets++;
+ txq->tx_bytes += len;
+ } else
+ txq->tx_dropped++;
+
return NETDEV_TX_OK;
}
@@ -561,6 +579,55 @@
return err;
}
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+static int vlan_dev_fcoe_ddp_setup(struct net_device *dev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc)
+{
+ struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+ const struct net_device_ops *ops = real_dev->netdev_ops;
+ int rc = 0;
+
+ if (ops->ndo_fcoe_ddp_setup)
+ rc = ops->ndo_fcoe_ddp_setup(real_dev, xid, sgl, sgc);
+
+ return rc;
+}
+
+static int vlan_dev_fcoe_ddp_done(struct net_device *dev, u16 xid)
+{
+ struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+ const struct net_device_ops *ops = real_dev->netdev_ops;
+ int len = 0;
+
+ if (ops->ndo_fcoe_ddp_done)
+ len = ops->ndo_fcoe_ddp_done(real_dev, xid);
+
+ return len;
+}
+
+static int vlan_dev_fcoe_enable(struct net_device *dev)
+{
+ struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+ const struct net_device_ops *ops = real_dev->netdev_ops;
+ int rc = -EINVAL;
+
+ if (ops->ndo_fcoe_enable)
+ rc = ops->ndo_fcoe_enable(real_dev);
+ return rc;
+}
+
+static int vlan_dev_fcoe_disable(struct net_device *dev)
+{
+ struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+ const struct net_device_ops *ops = real_dev->netdev_ops;
+ int rc = -EINVAL;
+
+ if (ops->ndo_fcoe_disable)
+ rc = ops->ndo_fcoe_disable(real_dev);
+ return rc;
+}
+#endif
+
static void vlan_dev_change_rx_flags(struct net_device *dev, int change)
{
struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
@@ -635,6 +702,10 @@
if (is_zero_ether_addr(dev->broadcast))
memcpy(dev->broadcast, real_dev->broadcast, dev->addr_len);
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ dev->fcoe_ddp_xid = real_dev->fcoe_ddp_xid;
+#endif
+
if (real_dev->features & NETIF_F_HW_VLAN_TX) {
dev->header_ops = real_dev->header_ops;
dev->hard_header_len = real_dev->hard_header_len;
@@ -715,6 +786,12 @@
.ndo_change_rx_flags = vlan_dev_change_rx_flags,
.ndo_do_ioctl = vlan_dev_ioctl,
.ndo_neigh_setup = vlan_dev_neigh_setup,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
+ .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
+ .ndo_fcoe_enable = vlan_dev_fcoe_enable,
+ .ndo_fcoe_disable = vlan_dev_fcoe_disable,
+#endif
};
static const struct net_device_ops vlan_netdev_accel_ops = {
@@ -731,6 +808,12 @@
.ndo_change_rx_flags = vlan_dev_change_rx_flags,
.ndo_do_ioctl = vlan_dev_ioctl,
.ndo_neigh_setup = vlan_dev_neigh_setup,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
+ .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
+ .ndo_fcoe_enable = vlan_dev_fcoe_enable,
+ .ndo_fcoe_disable = vlan_dev_fcoe_disable,
+#endif
};
void vlan_setup(struct net_device *dev)
diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c
index e9c91dc..343146e 100644
--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -100,6 +100,25 @@
return 0;
}
+static int vlan_get_tx_queues(struct net *net,
+ struct nlattr *tb[],
+ unsigned int *num_tx_queues,
+ unsigned int *real_num_tx_queues)
+{
+ struct net_device *real_dev;
+
+ if (!tb[IFLA_LINK])
+ return -EINVAL;
+
+ real_dev = __dev_get_by_index(net, nla_get_u32(tb[IFLA_LINK]));
+ if (!real_dev)
+ return -ENODEV;
+
+ *num_tx_queues = real_dev->num_tx_queues;
+ *real_num_tx_queues = real_dev->real_num_tx_queues;
+ return 0;
+}
+
static int vlan_newlink(struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
@@ -216,6 +235,7 @@
.maxtype = IFLA_VLAN_MAX,
.policy = vlan_policy,
.priv_size = sizeof(struct vlan_dev_info),
+ .get_tx_queues = vlan_get_tx_queues,
.setup = vlan_setup,
.validate = vlan_validate,
.newlink = vlan_newlink,
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index b55a091..6262c33 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -107,7 +107,7 @@
*/
/* Strings */
-static const char *vlan_name_type_str[VLAN_NAME_TYPE_HIGHEST] = {
+static const char *const vlan_name_type_str[VLAN_NAME_TYPE_HIGHEST] = {
[VLAN_NAME_TYPE_RAW_PLUS_VID] = "VLAN_NAME_TYPE_RAW_PLUS_VID",
[VLAN_NAME_TYPE_PLUS_VID_NO_PAD] = "VLAN_NAME_TYPE_PLUS_VID_NO_PAD",
[VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD] = "VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD",
diff --git a/net/9p/client.c b/net/9p/client.c
index 787ccdd..5bf5f22 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -60,9 +60,9 @@
p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...);
/**
- * v9fs_parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @v9ses: existing v9fs session information
+ * parse_options - parse mount options into client structure
+ * @opts: options string passed from mount
+ * @clnt: existing v9fs client information
*
* Return 0 upon success, -ERRNO upon failure
*/
@@ -232,7 +232,7 @@
/**
* p9_tag_init - setup tags structure and contents
- * @tags: tags structure from the client struct
+ * @c: v9fs client struct
*
* This initializes the tags structure for each client instance.
*
@@ -258,7 +258,7 @@
/**
* p9_tag_cleanup - cleans up tags structure and reclaims resources
- * @tags: tags structure from the client struct
+ * @c: v9fs client struct
*
* This frees resources associated with the tags structure
*
@@ -411,14 +411,9 @@
if (c->dotu)
err = -ecode;
- if (!err) {
+ if (!err || !IS_ERR_VALUE(err))
err = p9_errstr2errno(ename, strlen(ename));
- /* string match failed */
- if (!err)
- err = -ESERVERFAULT;
- }
-
P9_DPRINTK(P9_DEBUG_9P, "<<< RERROR (%d) %s\n", -ecode, ename);
kfree(ename);
@@ -430,8 +425,8 @@
/**
* p9_client_flush - flush (cancel) a request
- * c: client state
- * req: request to cancel
+ * @c: client state
+ * @oldreq: request to cancel
*
* This sents a flush for a particular requests and links
* the flush request to the original request. The current
diff --git a/net/9p/error.c b/net/9p/error.c
index fdebe43..5251851 100644
--- a/net/9p/error.c
+++ b/net/9p/error.c
@@ -239,7 +239,7 @@
errstr[len] = 0;
printk(KERN_ERR "%s: server reported unknown error %s\n",
__func__, errstr);
- errno = 1;
+ errno = ESERVERFAULT;
}
return -errno;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 8c2588e..8d934dd 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -119,8 +119,8 @@
* @wpos: write position for current frame
* @wsize: amount of data to write for current frame
* @wbuf: current write buffer
+ * @poll_pending_link: pending links to be polled per conn
* @poll_wait: array of wait_q's for various worker threads
- * @poll_waddr: ????
* @pt: poll state
* @rq: current read work
* @wq: current write work
@@ -700,9 +700,9 @@
}
/**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into p9_fd_opts structure
+ * @params: options string passed from mount
+ * @opts: fd transport-specific structure to parse options into
*
* Returns 0 upon success, -ERRNO upon failure
*/
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index ac49900..65cb29d 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -67,14 +67,15 @@
* @pd: Protection Domain pointer
* @qp: Queue Pair pointer
* @cq: Completion Queue pointer
+ * @dm_mr: DMA Memory Region pointer
* @lkey: The local access only memory region key
* @timeout: Number of uSecs to wait for connection management events
* @sq_depth: The depth of the Send Queue
* @sq_sem: Semaphore for the SQ
* @rq_depth: The depth of the Receive Queue.
+ * @rq_count: Count of requests in the Receive Queue.
* @addr: The remote peer's address
* @req_lock: Protects the active request list
- * @send_wait: Wait list when the SQ fills up
* @cm_done: Completion event for connection management tracking
*/
struct p9_trans_rdma {
@@ -154,9 +155,9 @@
};
/**
- * parse_options - parse mount options into session structure
- * @options: options string passed from mount
- * @opts: transport-specific structure to parse options into
+ * parse_opts - parse mount options into rdma options structure
+ * @params: options string passed from mount
+ * @opts: rdma transport-specific structure to parse options into
*
* Returns 0 upon success, -ERRNO upon failure
*/
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index a49484e..9bf0b73 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -57,11 +57,9 @@
* @initialized: whether the channel is initialized
* @inuse: whether the channel is in use
* @lock: protects multiple elements within this structure
+ * @client: client instance
* @vdev: virtio dev associated with this channel
* @vq: virtio queue associated with this channel
- * @tagpool: accounting for tag ids (and request slots)
- * @reqs: array of request slots
- * @max_tag: current number of request_slots allocated
* @sg: scatter gather list which is used to pack a request (protected?)
*
* We keep all per-channel information in a structure.
@@ -92,7 +90,7 @@
/**
* p9_virtio_close - reclaim resources of a channel
- * @trans: transport state
+ * @client: client instance
*
* This reclaims a channel by freeing its resources and
* reseting its inuse flag.
@@ -181,9 +179,8 @@
/**
* p9_virtio_request - issue a request
- * @t: transport state
- * @tc: &p9_fcall request to transmit
- * @rc: &p9_fcall to put reponse into
+ * @client: client instance issuing the request
+ * @req: request to be issued
*
*/
diff --git a/net/Kconfig b/net/Kconfig
index 7051b97..041c35e 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -23,6 +23,26 @@
if NET
+config WANT_COMPAT_NETLINK_MESSAGES
+ bool
+ help
+ This option can be selected by other options that need compat
+ netlink messages.
+
+config COMPAT_NETLINK_MESSAGES
+ def_bool y
+ depends on COMPAT
+ depends on WIRELESS_EXT || WANT_COMPAT_NETLINK_MESSAGES
+ help
+ This option makes it possible to send different netlink messages
+ to tasks depending on whether the task is a compat task or not. To
+ achieve this, you need to set skb_shinfo(skb)->frag_list to the
+ compat skb before sending the skb, the netlink code will sort out
+ which message to actually pass to the task.
+
+ Newly written code should NEVER need this option but do
+ compat-independent messages instead!
+
menu "Networking options"
source "net/packet/Kconfig"
diff --git a/net/Makefile b/net/Makefile
index ba324ae..1542e72 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -24,7 +24,6 @@
endif
obj-$(CONFIG_PACKET) += packet/
obj-$(CONFIG_NET_KEY) += key/
-obj-$(CONFIG_NET_SCHED) += sched/
obj-$(CONFIG_BRIDGE) += bridge/
obj-$(CONFIG_NET_DSA) += dsa/
obj-$(CONFIG_IPX) += ipx/
diff --git a/net/appletalk/aarp.c b/net/appletalk/aarp.c
index 89f99d3..9d4adfd 100644
--- a/net/appletalk/aarp.c
+++ b/net/appletalk/aarp.c
@@ -599,7 +599,7 @@
/* Non ELAP we cannot do. */
if (dev->type != ARPHRD_ETHER)
- return -1;
+ goto free_it;
skb->dev = dev;
skb->protocol = htons(ETH_P_ATALK);
@@ -634,7 +634,7 @@
if (!a) {
/* Whoops slipped... good job it's an unreliable protocol 8) */
write_unlock_bh(&aarp_lock);
- return -1;
+ goto free_it;
}
/* Set up the queue */
@@ -663,15 +663,21 @@
write_unlock_bh(&aarp_lock);
/* Tell the ddp layer we have taken over for this frame. */
- return 0;
+ goto sent;
sendit:
if (skb->sk)
skb->priority = skb->sk->sk_priority;
- dev_queue_xmit(skb);
+ if (dev_queue_xmit(skb))
+ goto drop;
sent:
- return 1;
+ return NET_XMIT_SUCCESS;
+free_it:
+ kfree_skb(skb);
+drop:
+ return NET_XMIT_DROP;
}
+EXPORT_SYMBOL(aarp_send_ddp);
/*
* An entry in the aarp unresolved queue has become resolved. Send
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 875eda5..4a6ff2b 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1270,8 +1270,10 @@
struct net_device_stats *stats;
/* This needs to be able to handle ipddp"N" devices */
- if (!dev)
- return -ENODEV;
+ if (!dev) {
+ kfree_skb(skb);
+ return NET_RX_DROP;
+ }
skb->protocol = htons(ETH_P_IP);
skb_pull(skb, 13);
@@ -1281,8 +1283,7 @@
stats = netdev_priv(dev);
stats->rx_packets++;
stats->rx_bytes += skb->len + 13;
- netif_rx(skb); /* Send the SKB up to a higher place. */
- return 0;
+ return netif_rx(skb); /* Send the SKB up to a higher place. */
}
#else
/* make it easy for gcc to optimize this test out, i.e. kill the code */
@@ -1290,9 +1291,8 @@
#define handle_ip_over_ddp(skb) 0
#endif
-static void atalk_route_packet(struct sk_buff *skb, struct net_device *dev,
- struct ddpehdr *ddp, __u16 len_hops,
- int origlen)
+static int atalk_route_packet(struct sk_buff *skb, struct net_device *dev,
+ struct ddpehdr *ddp, __u16 len_hops, int origlen)
{
struct atalk_route *rt;
struct atalk_addr ta;
@@ -1359,8 +1359,6 @@
/* 22 bytes - 12 ether, 2 len, 3 802.2 5 snap */
struct sk_buff *nskb = skb_realloc_headroom(skb, 32);
kfree_skb(skb);
- if (!nskb)
- goto out;
skb = nskb;
} else
skb = skb_unshare(skb, GFP_ATOMIC);
@@ -1369,12 +1367,16 @@
* If the buffer didn't vanish into the lack of space bitbucket we can
* send it.
*/
- if (skb && aarp_send_ddp(rt->dev, skb, &ta, NULL) == -1)
- goto free_it;
-out:
- return;
+ if (skb == NULL)
+ goto drop;
+
+ if (aarp_send_ddp(rt->dev, skb, &ta, NULL) == NET_XMIT_DROP)
+ return NET_RX_DROP;
+ return NET_XMIT_SUCCESS;
free_it:
kfree_skb(skb);
+drop:
+ return NET_RX_DROP;
}
/**
@@ -1400,7 +1402,7 @@
__u16 len_hops;
if (!net_eq(dev_net(dev), &init_net))
- goto freeit;
+ goto drop;
/* Don't mangle buffer if shared */
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
@@ -1408,7 +1410,7 @@
/* Size check and make sure header is contiguous */
if (!pskb_may_pull(skb, sizeof(*ddp)))
- goto freeit;
+ goto drop;
ddp = ddp_hdr(skb);
@@ -1426,7 +1428,7 @@
if (skb->len < sizeof(*ddp) || skb->len < (len_hops & 1023)) {
pr_debug("AppleTalk: dropping corrupted frame (deh_len=%u, "
"skb->len=%u)\n", len_hops & 1023, skb->len);
- goto freeit;
+ goto drop;
}
/*
@@ -1436,7 +1438,7 @@
if (ddp->deh_sum &&
atalk_checksum(skb, len_hops & 1023) != ddp->deh_sum)
/* Not a valid AppleTalk frame - dustbin time */
- goto freeit;
+ goto drop;
/* Check the packet is aimed at us */
if (!ddp->deh_dnet) /* Net 0 is 'this network' */
@@ -1448,8 +1450,7 @@
/* Not ours, so we route the packet via the correct
* AppleTalk iface
*/
- atalk_route_packet(skb, dev, ddp, len_hops, origlen);
- goto out;
+ return atalk_route_packet(skb, dev, ddp, len_hops, origlen);
}
/* if IP over DDP is not selected this code will be optimized out */
@@ -1465,18 +1466,21 @@
sock = atalk_search_socket(&tosat, atif);
if (!sock) /* But not one of our sockets */
- goto freeit;
+ goto drop;
/* Queue packet (standard) */
skb->sk = sock;
if (sock_queue_rcv_skb(sock, skb) < 0)
- goto freeit;
-out:
- return 0;
-freeit:
+ goto drop;
+
+ return NET_RX_SUCCESS;
+
+drop:
kfree_skb(skb);
- goto out;
+out:
+ return NET_RX_DROP;
+
}
/*
@@ -1652,10 +1656,10 @@
if (skb2) {
loopback = 1;
SOCK_DEBUG(sk, "SK %p: send out(copy).\n", sk);
- if (aarp_send_ddp(dev, skb2,
- &usat->sat_addr, NULL) == -1)
- kfree_skb(skb2);
- /* else queued/sent above in the aarp queue */
+ /*
+ * If it fails it is queued/sent above in the aarp queue
+ */
+ aarp_send_ddp(dev, skb2, &usat->sat_addr, NULL);
}
}
@@ -1685,9 +1689,10 @@
usat = &gsat;
}
- if (aarp_send_ddp(dev, skb, &usat->sat_addr, NULL) == -1)
- kfree_skb(skb);
- /* else queued/sent above in the aarp queue */
+ /*
+ * If it fails it is queued/sent above in the aarp queue
+ */
+ aarp_send_ddp(dev, skb, &usat->sat_addr, NULL);
}
SOCK_DEBUG(sk, "SK %p: Done write (%Zd).\n", sk, len);
@@ -1865,7 +1870,6 @@
static unsigned char ddp_snap_id[] = { 0x08, 0x00, 0x07, 0x80, 0x9B };
/* Export symbols for use by drivers when AppleTalk is a module */
-EXPORT_SYMBOL(aarp_send_ddp);
EXPORT_SYMBOL(atrtr_get_dev);
EXPORT_SYMBOL(atalk_find_dev_addr);
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 2912665f..26a646d 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -69,7 +69,7 @@
struct net_device *device;
/* keep old push, pop functions for chaining */
void (*old_push) (struct atm_vcc * vcc, struct sk_buff * skb);
- /* void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb); */
+ void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb);
enum br2684_encaps encaps;
struct list_head brvccs;
#ifdef CONFIG_ATM_BR2684_IPFILTER
@@ -142,6 +142,22 @@
return NULL;
}
+/* chained vcc->pop function. Check if we should wake the netif_queue */
+static void br2684_pop(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ struct br2684_vcc *brvcc = BR2684_VCC(vcc);
+ struct net_device *net_dev = skb->dev;
+
+ pr_debug("br2684_pop(vcc %p ; net_dev %p )\n", vcc, net_dev);
+ brvcc->old_pop(vcc, skb);
+
+ if (!net_dev)
+ return;
+
+ if (atm_may_send(vcc, 0))
+ netif_wake_queue(net_dev);
+
+}
/*
* Send a packet out a particular vcc. Not to useful right now, but paves
* the way for multiple vcc's per itf. Returns true if we can send,
@@ -200,20 +216,19 @@
ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
- if (!atm_may_send(atmvcc, skb->truesize)) {
- /*
- * We free this here for now, because we cannot know in a higher
- * layer whether the skb pointer it supplied wasn't freed yet.
- * Now, it always is.
- */
- dev_kfree_skb(skb);
- return 0;
- }
atomic_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc);
ATM_SKB(skb)->atm_options = atmvcc->atm_options;
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
atmvcc->send(atmvcc, skb);
+
+ if (!atm_may_send(atmvcc, 0)) {
+ netif_stop_queue(brvcc->device);
+ /*check for race with br2684_pop*/
+ if (atm_may_send(atmvcc, 0))
+ netif_start_queue(brvcc->device);
+ }
+
return 1;
}
@@ -223,7 +238,8 @@
return list_empty(&brdev->brvccs) ? NULL : list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
}
-static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t br2684_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct br2684_dev *brdev = BRPRIV(dev);
struct br2684_vcc *brvcc;
@@ -238,7 +254,7 @@
/* netif_stop_queue(dev); */
dev_kfree_skb(skb);
read_unlock(&devs_lock);
- return 0;
+ return NETDEV_TX_OK;
}
if (!br2684_xmit_vcc(skb, dev, brvcc)) {
/*
@@ -252,7 +268,7 @@
dev->stats.tx_fifo_errors++;
}
read_unlock(&devs_lock);
- return 0;
+ return NETDEV_TX_OK;
}
/*
@@ -503,8 +519,10 @@
atmvcc->user_back = brvcc;
brvcc->encaps = (enum br2684_encaps)be.encaps;
brvcc->old_push = atmvcc->push;
+ brvcc->old_pop = atmvcc->pop;
barrier();
atmvcc->push = br2684_push;
+ atmvcc->pop = br2684_pop;
__skb_queue_head_init(&queue);
rq = &sk_atm(atmvcc)->sk_receive_queue;
diff --git a/net/atm/clip.c b/net/atm/clip.c
index e65a3b1..64629c3 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -267,7 +267,7 @@
kfree_skb(skb);
}
-static struct neigh_ops clip_neigh_ops = {
+static const struct neigh_ops clip_neigh_ops = {
.family = AF_INET,
.solicit = clip_neigh_solicit,
.error_report = clip_neigh_error,
@@ -360,7 +360,8 @@
return 0;
}
-static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t clip_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct clip_priv *clip_priv = PRIV(dev);
struct atmarp_entry *entry;
@@ -373,7 +374,7 @@
printk(KERN_ERR "clip_start_xmit: skb_dst(skb) == NULL\n");
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
if (!skb_dst(skb)->neighbour) {
#if 0
@@ -387,7 +388,7 @@
printk(KERN_ERR "clip_start_xmit: NO NEIGHBOUR !\n");
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
entry = NEIGH2ENTRY(skb_dst(skb)->neighbour);
if (!entry->vccs) {
@@ -402,7 +403,7 @@
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
}
- return 0;
+ return NETDEV_TX_OK;
}
pr_debug("neigh %p, vccs %p\n", entry, entry->vccs);
ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc;
@@ -421,14 +422,14 @@
old = xchg(&entry->vccs->xoff, 1); /* assume XOFF ... */
if (old) {
printk(KERN_WARNING "clip_start_xmit: XOFF->XOFF transition\n");
- return 0;
+ return NETDEV_TX_OK;
}
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
vcc->send(vcc, skb);
if (atm_may_send(vcc, 0)) {
entry->vccs->xoff = 0;
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&clip_priv->xoff_lock, flags);
netif_stop_queue(dev); /* XOFF -> throttle immediately */
@@ -440,7 +441,7 @@
of the brief netif_stop_queue. If this isn't true or if it
changes, use netif_wake_queue instead. */
spin_unlock_irqrestore(&clip_priv->xoff_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
static int clip_mkip(struct atm_vcc *vcc, int timeout)
diff --git a/net/atm/lec.c b/net/atm/lec.c
index ff2e594..b2d6445 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -59,7 +59,8 @@
*/
static int lec_open(struct net_device *dev);
-static int lec_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t lec_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static int lec_close(struct net_device *dev);
static void lec_init(struct net_device *dev);
static struct lec_arp_table *lec_arp_find(struct lec_priv *priv,
@@ -247,7 +248,8 @@
netif_wake_queue(dev);
}
-static int lec_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lec_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct sk_buff *skb2;
struct lec_priv *priv = netdev_priv(dev);
@@ -289,7 +291,7 @@
skb2 = skb_realloc_headroom(skb, LEC_HEADER_LEN);
kfree_skb(skb);
if (skb2 == NULL)
- return 0;
+ return NETDEV_TX_OK;
skb = skb2;
}
skb_push(skb, 2);
@@ -307,7 +309,7 @@
skb2 = skb_realloc_headroom(skb, LEC_HEADER_LEN);
kfree_skb(skb);
if (skb2 == NULL)
- return 0;
+ return NETDEV_TX_OK;
skb = skb2;
}
#endif
@@ -345,7 +347,7 @@
dev_kfree_skb(skb);
if (skb2 == NULL) {
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
skb = skb2;
}
@@ -416,7 +418,7 @@
if (entry)
lec_arp_put(entry);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
/* The inverse routine to net_open(). */
@@ -935,9 +937,9 @@
}
#ifdef CONFIG_PROC_FS
-static char *lec_arp_get_status_string(unsigned char status)
+static const char *lec_arp_get_status_string(unsigned char status)
{
- static char *lec_arp_status_string[] = {
+ static const char *const lec_arp_status_string[] = {
"ESI_UNKNOWN ",
"ESI_ARP_PENDING ",
"ESI_VC_PENDING ",
@@ -1121,7 +1123,8 @@
static int lec_seq_show(struct seq_file *seq, void *v)
{
- static char lec_banner[] = "Itf MAC ATM destination"
+ static const char lec_banner[] =
+ "Itf MAC ATM destination"
" Status Flags "
"VPI/VCI Recv VPI/VCI\n";
@@ -1505,7 +1508,7 @@
}
#if DEBUG_ARP_TABLE
-static char *get_status_string(unsigned char st)
+static const char *get_status_string(unsigned char st)
{
switch (st) {
case ESI_UNKNOWN:
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index e5bf114..38a6cb0 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -73,7 +73,8 @@
static int msg_from_mpoad(struct atm_vcc *vcc, struct sk_buff *skb);
static void mpc_push(struct atm_vcc *vcc, struct sk_buff *skb);
-static int mpc_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t mpc_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static int mpoa_event_listener(struct notifier_block *mpoa_notifier, unsigned long event, void *dev);
static void mpc_timer_refresh(void);
static void mpc_cache_check( unsigned long checking_time );
@@ -528,7 +529,8 @@
/*
* Probably needs some error checks and locking, not sure...
*/
-static int mpc_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t mpc_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
{
struct mpoa_client *mpc;
struct ethhdr *eth;
@@ -554,7 +556,7 @@
while (i < mpc->number_of_mps_macs) {
if (!compare_ether_addr(eth->h_dest, (mpc->mps_macs + i*ETH_ALEN)))
if ( send_via_shortcut(skb, mpc) == 0 ) /* try shortcut */
- return 0; /* success! */
+ return NETDEV_TX_OK; /* success! */
i++;
}
diff --git a/net/atm/proc.c b/net/atm/proc.c
index 38de5ff..ab8419a 100644
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
@@ -151,8 +151,9 @@
static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
{
- static const char *class_name[] = { "off","UBR","CBR","VBR","ABR" };
- static const char *aal_name[] = {
+ static const char *const class_name[] =
+ {"off","UBR","CBR","VBR","ABR"};
+ static const char *const aal_name[] = {
"---", "1", "2", "3/4", /* 0- 3 */
"???", "5", "???", "???", /* 4- 7 */
"???", "???", "???", "???", /* 8-11 */
@@ -178,7 +179,7 @@
static const char *vcc_state(struct atm_vcc *vcc)
{
- static const char *map[] = { ATM_VS2TXT_MAP };
+ static const char *const map[] = { ATM_VS2TXT_MAP };
return map[ATM_VF2VS(vcc->flags)];
}
@@ -335,7 +336,7 @@
static int svc_seq_show(struct seq_file *seq, void *v)
{
- static char atm_svc_banner[] =
+ static const char atm_svc_banner[] =
"Itf VPI VCI State Remote\n";
if (v == SEQ_START_TOKEN)
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 59fdb1d..ed37168 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -34,6 +34,7 @@
config BT_L2CAP
tristate "L2CAP protocol support"
depends on BT
+ select CRC16
help
L2CAP (Logical Link Control and Adaptation Protocol) provides
connection oriented and connection-less data transport. L2CAP
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 0250e06..8cfb5a8 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -49,7 +49,7 @@
static DEFINE_RWLOCK(bt_proto_lock);
static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
-static const char *bt_key_strings[BT_MAX_PROTO] = {
+static const char *const bt_key_strings[BT_MAX_PROTO] = {
"sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
"sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
"sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
@@ -61,7 +61,7 @@
};
static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
-static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
+static const char *const bt_slock_key_strings[BT_MAX_PROTO] = {
"slock-AF_BLUETOOTH-BTPROTO_L2CAP",
"slock-AF_BLUETOOTH-BTPROTO_HCI",
"slock-AF_BLUETOOTH-BTPROTO_SCO",
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 52a6ce0..cafe9f5 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -533,6 +533,10 @@
return conn ? &conn->dev : NULL;
}
+static struct device_type bnep_type = {
+ .name = "bluetooth",
+};
+
int bnep_add_connection(struct bnep_connadd_req *req, struct socket *sock)
{
struct net_device *dev;
@@ -586,6 +590,7 @@
#endif
SET_NETDEV_DEV(dev, bnep_get_device(s));
+ SET_NETDEV_DEVTYPE(dev, &bnep_type);
err = register_netdev(dev);
if (err) {
diff --git a/net/bluetooth/bnep/netdev.c b/net/bluetooth/bnep/netdev.c
index d7a0e97..26fb831 100644
--- a/net/bluetooth/bnep/netdev.c
+++ b/net/bluetooth/bnep/netdev.c
@@ -165,7 +165,8 @@
}
#endif
-static int bnep_net_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t bnep_net_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct bnep_session *s = netdev_priv(dev);
struct sock *sk = s->sock->sk;
@@ -175,14 +176,14 @@
#ifdef CONFIG_BT_BNEP_MC_FILTER
if (bnep_net_mc_filter(skb, s)) {
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
#endif
#ifdef CONFIG_BT_BNEP_PROTO_FILTER
if (bnep_net_proto_filter(skb, s)) {
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
#endif
@@ -203,7 +204,7 @@
netif_stop_queue(dev);
}
- return 0;
+ return NETDEV_TX_OK;
}
static const struct net_device_ops bnep_netdev_ops = {
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index fa47d5d..a975098 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -246,6 +246,8 @@
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
+ atomic_set(&conn->devref, 0);
+
hci_conn_init_sysfs(conn);
tasklet_enable(&hdev->tx_task);
@@ -288,7 +290,7 @@
skb_queue_purge(&conn->data_q);
- hci_conn_del_sysfs(conn);
+ hci_conn_put_device(conn);
hci_dev_put(hdev);
@@ -583,6 +585,19 @@
hci_dev_unlock(hdev);
}
+void hci_conn_hold_device(struct hci_conn *conn)
+{
+ atomic_inc(&conn->devref);
+}
+EXPORT_SYMBOL(hci_conn_hold_device);
+
+void hci_conn_put_device(struct hci_conn *conn)
+{
+ if (atomic_dec_and_test(&conn->devref))
+ hci_conn_del_sysfs(conn);
+}
+EXPORT_SYMBOL(hci_conn_put_device);
+
int hci_get_conn_list(void __user *arg)
{
struct hci_conn_list_req req, *cl;
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 406ad07..e1da8f6 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -911,7 +911,7 @@
hdev->reassembly[i] = NULL;
init_waitqueue_head(&hdev->req_wait_q);
- init_MUTEX(&hdev->req_lock);
+ mutex_init(&hdev->req_lock);
inquiry_cache_init(hdev);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 184ba0a..e99fe38 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -887,6 +887,7 @@
} else
conn->state = BT_CONNECTED;
+ hci_conn_hold_device(conn);
hci_conn_add_sysfs(conn);
if (test_bit(HCI_AUTH, &hdev->flags))
@@ -1693,6 +1694,7 @@
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
+ hci_conn_hold_device(conn);
hci_conn_add_sysfs(conn);
break;
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index b186768..09bedeb 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -40,6 +40,7 @@
#include <linux/input.h>
#include <linux/hid.h>
+#include <linux/hidraw.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -92,10 +93,14 @@
{
__module_get(THIS_MODULE);
list_add(&session->list, &hidp_session_list);
+
+ hci_conn_hold_device(session->conn);
}
static void __hidp_unlink_session(struct hidp_session *session)
{
+ hci_conn_put_device(session->conn);
+
list_del(&session->list);
module_put(THIS_MODULE);
}
@@ -374,6 +379,7 @@
/* Kill session thread */
atomic_inc(&session->terminate);
+ hidp_schedule(session);
}
}
@@ -573,7 +579,11 @@
if (session->hid) {
if (session->hid->claimed & HID_CLAIMED_INPUT)
hidinput_disconnect(session->hid);
+ if (session->hid->claimed & HID_CLAIMED_HIDRAW)
+ hidraw_disconnect(session->hid);
+
hid_destroy_device(session->hid);
+ session->hid = NULL;
}
/* Wakeup user-space polling for socket errors */
@@ -601,25 +611,27 @@
{
bdaddr_t *src = &bt_sk(session->ctrl_sock->sk)->src;
bdaddr_t *dst = &bt_sk(session->ctrl_sock->sk)->dst;
+ struct device *device = NULL;
struct hci_dev *hdev;
- struct hci_conn *conn;
hdev = hci_get_route(dst, src);
if (!hdev)
return NULL;
- conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
+ session->conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
+ if (session->conn)
+ device = &session->conn->dev;
hci_dev_put(hdev);
- return conn ? &conn->dev : NULL;
+ return device;
}
static int hidp_setup_input(struct hidp_session *session,
struct hidp_connadd_req *req)
{
struct input_dev *input;
- int i;
+ int err, i;
input = input_allocate_device();
if (!input)
@@ -666,7 +678,13 @@
input->event = hidp_input_event;
- return input_register_device(input);
+ err = input_register_device(input);
+ if (err < 0) {
+ hci_conn_put_device(session->conn);
+ return err;
+ }
+
+ return 0;
}
static int hidp_open(struct hid_device *hid)
@@ -748,13 +766,11 @@
{
struct hid_device *hid;
bdaddr_t src, dst;
- int ret;
+ int err;
hid = hid_allocate_device();
- if (IS_ERR(hid)) {
- ret = PTR_ERR(session->hid);
- goto err;
- }
+ if (IS_ERR(hid))
+ return PTR_ERR(session->hid);
session->hid = hid;
session->req = req;
@@ -776,16 +792,17 @@
hid->dev.parent = hidp_get_device(session);
hid->ll_driver = &hidp_hid_driver;
- ret = hid_add_device(hid);
- if (ret)
- goto err_hid;
+ err = hid_add_device(hid);
+ if (err < 0)
+ goto failed;
return 0;
-err_hid:
+
+failed:
hid_destroy_device(hid);
session->hid = NULL;
-err:
- return ret;
+
+ return err;
}
int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, struct socket *intr_sock)
@@ -835,13 +852,13 @@
if (req->rd_size > 0) {
err = hidp_setup_hid(session, req);
if (err && err != -ENODEV)
- goto err_skb;
+ goto purge;
}
if (!session->hid) {
err = hidp_setup_input(session, req);
if (err < 0)
- goto err_skb;
+ goto purge;
}
__hidp_link_session(session);
@@ -869,13 +886,20 @@
__hidp_unlink_session(session);
- if (session->input)
+ if (session->input) {
input_unregister_device(session->input);
- if (session->hid)
+ session->input = NULL;
+ }
+
+ if (session->hid) {
hid_destroy_device(session->hid);
-err_skb:
+ session->hid = NULL;
+ }
+
+purge:
skb_queue_purge(&session->ctrl_transmit);
skb_queue_purge(&session->intr_transmit);
+
failed:
up_write(&hidp_session_sem);
diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h
index e503c89..faf3d74 100644
--- a/net/bluetooth/hidp/hidp.h
+++ b/net/bluetooth/hidp/hidp.h
@@ -126,6 +126,8 @@
struct hidp_session {
struct list_head list;
+ struct hci_conn *conn;
+
struct socket *ctrl_sock;
struct socket *intr_sock;
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index bd0a4c1..b030125 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -41,6 +41,7 @@
#include <linux/list.h>
#include <linux/device.h>
#include <linux/uaccess.h>
+#include <linux/crc16.h>
#include <net/sock.h>
#include <asm/system.h>
@@ -50,7 +51,9 @@
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
-#define VERSION "2.13"
+#define VERSION "2.14"
+
+static int enable_ertm = 0;
static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
static u8 l2cap_fixed_chan[8] = { 0x02, };
@@ -331,6 +334,48 @@
return hci_send_acl(conn->hcon, skb, 0);
}
+static inline int l2cap_send_sframe(struct l2cap_pinfo *pi, u16 control)
+{
+ struct sk_buff *skb;
+ struct l2cap_hdr *lh;
+ struct l2cap_conn *conn = pi->conn;
+ int count, hlen = L2CAP_HDR_SIZE + 2;
+
+ if (pi->fcs == L2CAP_FCS_CRC16)
+ hlen += 2;
+
+ BT_DBG("pi %p, control 0x%2.2x", pi, control);
+
+ count = min_t(unsigned int, conn->mtu, hlen);
+ control |= L2CAP_CTRL_FRAME_TYPE;
+
+ skb = bt_skb_alloc(count, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
+ lh->len = cpu_to_le16(hlen - L2CAP_HDR_SIZE);
+ lh->cid = cpu_to_le16(pi->dcid);
+ put_unaligned_le16(control, skb_put(skb, 2));
+
+ if (pi->fcs == L2CAP_FCS_CRC16) {
+ u16 fcs = crc16(0, (u8 *)lh, count - 2);
+ put_unaligned_le16(fcs, skb_put(skb, 2));
+ }
+
+ return hci_send_acl(pi->conn->hcon, skb, 0);
+}
+
+static inline int l2cap_send_rr_or_rnr(struct l2cap_pinfo *pi, u16 control)
+{
+ if (pi->conn_state & L2CAP_CONN_LOCAL_BUSY)
+ control |= L2CAP_SUPER_RCV_NOT_READY;
+ else
+ control |= L2CAP_SUPER_RCV_READY;
+
+ return l2cap_send_sframe(pi, control);
+}
+
static void l2cap_do_start(struct sock *sk)
{
struct l2cap_conn *conn = l2cap_pi(sk)->conn;
@@ -364,6 +409,16 @@
}
}
+static void l2cap_send_disconn_req(struct l2cap_conn *conn, struct sock *sk)
+{
+ struct l2cap_disconn_req req;
+
+ req.dcid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
+ l2cap_send_cmd(conn, l2cap_get_ident(conn),
+ L2CAP_DISCONN_REQ, sizeof(req), &req);
+}
+
/* ---- L2CAP connections ---- */
static void l2cap_conn_start(struct l2cap_conn *conn)
{
@@ -648,15 +703,10 @@
case BT_CONFIG:
if (sk->sk_type == SOCK_SEQPACKET) {
struct l2cap_conn *conn = l2cap_pi(sk)->conn;
- struct l2cap_disconn_req req;
sk->sk_state = BT_DISCONN;
l2cap_sock_set_timer(sk, sk->sk_sndtimeo);
-
- req.dcid = cpu_to_le16(l2cap_pi(sk)->dcid);
- req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
- l2cap_send_cmd(conn, l2cap_get_ident(conn),
- L2CAP_DISCONN_REQ, sizeof(req), &req);
+ l2cap_send_disconn_req(conn, sk);
} else
l2cap_chan_del(sk, reason);
break;
@@ -715,12 +765,16 @@
pi->imtu = l2cap_pi(parent)->imtu;
pi->omtu = l2cap_pi(parent)->omtu;
+ pi->mode = l2cap_pi(parent)->mode;
+ pi->fcs = l2cap_pi(parent)->fcs;
pi->sec_level = l2cap_pi(parent)->sec_level;
pi->role_switch = l2cap_pi(parent)->role_switch;
pi->force_reliable = l2cap_pi(parent)->force_reliable;
} else {
pi->imtu = L2CAP_DEFAULT_MTU;
pi->omtu = 0;
+ pi->mode = L2CAP_MODE_BASIC;
+ pi->fcs = L2CAP_FCS_CRC16;
pi->sec_level = BT_SECURITY_LOW;
pi->role_switch = 0;
pi->force_reliable = 0;
@@ -956,6 +1010,19 @@
goto done;
}
+ switch (l2cap_pi(sk)->mode) {
+ case L2CAP_MODE_BASIC:
+ break;
+ case L2CAP_MODE_ERTM:
+ case L2CAP_MODE_STREAMING:
+ if (enable_ertm)
+ break;
+ /* fall through */
+ default:
+ err = -ENOTSUPP;
+ goto done;
+ }
+
switch (sk->sk_state) {
case BT_CONNECT:
case BT_CONNECT2:
@@ -1007,6 +1074,19 @@
goto done;
}
+ switch (l2cap_pi(sk)->mode) {
+ case L2CAP_MODE_BASIC:
+ break;
+ case L2CAP_MODE_ERTM:
+ case L2CAP_MODE_STREAMING:
+ if (enable_ertm)
+ break;
+ /* fall through */
+ default:
+ err = -ENOTSUPP;
+ goto done;
+ }
+
if (!l2cap_pi(sk)->psm) {
bdaddr_t *src = &bt_sk(sk)->src;
u16 psm;
@@ -1117,39 +1197,219 @@
return 0;
}
-static inline int l2cap_do_send(struct sock *sk, struct msghdr *msg, int len)
+static void l2cap_monitor_timeout(unsigned long arg)
+{
+ struct sock *sk = (void *) arg;
+ u16 control;
+
+ bh_lock_sock(sk);
+ if (l2cap_pi(sk)->retry_count >= l2cap_pi(sk)->remote_max_tx) {
+ l2cap_send_disconn_req(l2cap_pi(sk)->conn, sk);
+ return;
+ }
+
+ l2cap_pi(sk)->retry_count++;
+ __mod_monitor_timer();
+
+ control = L2CAP_CTRL_POLL;
+ l2cap_send_rr_or_rnr(l2cap_pi(sk), control);
+ bh_unlock_sock(sk);
+}
+
+static void l2cap_retrans_timeout(unsigned long arg)
+{
+ struct sock *sk = (void *) arg;
+ u16 control;
+
+ bh_lock_sock(sk);
+ l2cap_pi(sk)->retry_count = 1;
+ __mod_monitor_timer();
+
+ l2cap_pi(sk)->conn_state |= L2CAP_CONN_WAIT_F;
+
+ control = L2CAP_CTRL_POLL;
+ l2cap_send_rr_or_rnr(l2cap_pi(sk), control);
+ bh_unlock_sock(sk);
+}
+
+static void l2cap_drop_acked_frames(struct sock *sk)
+{
+ struct sk_buff *skb;
+
+ while ((skb = skb_peek(TX_QUEUE(sk)))) {
+ if (bt_cb(skb)->tx_seq == l2cap_pi(sk)->expected_ack_seq)
+ break;
+
+ skb = skb_dequeue(TX_QUEUE(sk));
+ kfree_skb(skb);
+
+ l2cap_pi(sk)->unacked_frames--;
+ }
+
+ if (!l2cap_pi(sk)->unacked_frames)
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+
+ return;
+}
+
+static inline int l2cap_do_send(struct sock *sk, struct sk_buff *skb)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ int err;
+
+ BT_DBG("sk %p, skb %p len %d", sk, skb, skb->len);
+
+ err = hci_send_acl(pi->conn->hcon, skb, 0);
+ if (err < 0)
+ kfree_skb(skb);
+
+ return err;
+}
+
+static int l2cap_streaming_send(struct sock *sk)
+{
+ struct sk_buff *skb, *tx_skb;
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ u16 control, fcs;
+ int err;
+
+ while ((skb = sk->sk_send_head)) {
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+
+ control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+ control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
+ put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+
+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16) {
+ fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
+ put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
+ }
+
+ err = l2cap_do_send(sk, tx_skb);
+ if (err < 0) {
+ l2cap_send_disconn_req(pi->conn, sk);
+ return err;
+ }
+
+ pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
+
+ if (skb_queue_is_last(TX_QUEUE(sk), skb))
+ sk->sk_send_head = NULL;
+ else
+ sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
+
+ skb = skb_dequeue(TX_QUEUE(sk));
+ kfree_skb(skb);
+ }
+ return 0;
+}
+
+static int l2cap_retransmit_frame(struct sock *sk, u8 tx_seq)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct sk_buff *skb, *tx_skb;
+ u16 control, fcs;
+ int err;
+
+ skb = skb_peek(TX_QUEUE(sk));
+ do {
+ if (bt_cb(skb)->tx_seq != tx_seq) {
+ if (skb_queue_is_last(TX_QUEUE(sk), skb))
+ break;
+ skb = skb_queue_next(TX_QUEUE(sk), skb);
+ continue;
+ }
+
+ if (pi->remote_max_tx &&
+ bt_cb(skb)->retries == pi->remote_max_tx) {
+ l2cap_send_disconn_req(pi->conn, sk);
+ break;
+ }
+
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+ bt_cb(skb)->retries++;
+ control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+ control |= (pi->req_seq << L2CAP_CTRL_REQSEQ_SHIFT)
+ | (tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
+ put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+
+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16) {
+ fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
+ put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
+ }
+
+ err = l2cap_do_send(sk, tx_skb);
+ if (err < 0) {
+ l2cap_send_disconn_req(pi->conn, sk);
+ return err;
+ }
+ break;
+ } while(1);
+ return 0;
+}
+
+static int l2cap_ertm_send(struct sock *sk)
+{
+ struct sk_buff *skb, *tx_skb;
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ u16 control, fcs;
+ int err;
+
+ if (pi->conn_state & L2CAP_CONN_WAIT_F)
+ return 0;
+
+ while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk))
+ && !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) {
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+
+ if (pi->remote_max_tx &&
+ bt_cb(skb)->retries == pi->remote_max_tx) {
+ l2cap_send_disconn_req(pi->conn, sk);
+ break;
+ }
+
+ bt_cb(skb)->retries++;
+
+ control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+ control |= (pi->req_seq << L2CAP_CTRL_REQSEQ_SHIFT)
+ | (pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
+ put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+
+
+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16) {
+ fcs = crc16(0, (u8 *)skb->data, tx_skb->len - 2);
+ put_unaligned_le16(fcs, skb->data + tx_skb->len - 2);
+ }
+
+ err = l2cap_do_send(sk, tx_skb);
+ if (err < 0) {
+ l2cap_send_disconn_req(pi->conn, sk);
+ return err;
+ }
+ __mod_retrans_timer();
+
+ bt_cb(skb)->tx_seq = pi->next_tx_seq;
+ pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
+
+ pi->unacked_frames++;
+
+ if (skb_queue_is_last(TX_QUEUE(sk), skb))
+ sk->sk_send_head = NULL;
+ else
+ sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
+ }
+
+ return 0;
+}
+
+static inline int l2cap_skbuff_fromiovec(struct sock *sk, struct msghdr *msg, int len, int count, struct sk_buff *skb)
{
struct l2cap_conn *conn = l2cap_pi(sk)->conn;
- struct sk_buff *skb, **frag;
- int err, hlen, count, sent = 0;
- struct l2cap_hdr *lh;
-
- BT_DBG("sk %p len %d", sk, len);
-
- /* First fragment (with L2CAP header) */
- if (sk->sk_type == SOCK_DGRAM)
- hlen = L2CAP_HDR_SIZE + 2;
- else
- hlen = L2CAP_HDR_SIZE;
-
- count = min_t(unsigned int, (conn->mtu - hlen), len);
-
- skb = bt_skb_send_alloc(sk, hlen + count,
- msg->msg_flags & MSG_DONTWAIT, &err);
- if (!skb)
- return err;
-
- /* Create L2CAP header */
- lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
- lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
- lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
-
- if (sk->sk_type == SOCK_DGRAM)
- put_unaligned(l2cap_pi(sk)->psm, (__le16 *) skb_put(skb, 2));
+ struct sk_buff **frag;
+ int err, sent = 0;
if (memcpy_fromiovec(skb_put(skb, count), msg->msg_iov, count)) {
- err = -EFAULT;
- goto fail;
+ return -EFAULT;
}
sent += count;
@@ -1162,33 +1422,173 @@
*frag = bt_skb_send_alloc(sk, count, msg->msg_flags & MSG_DONTWAIT, &err);
if (!*frag)
- goto fail;
-
- if (memcpy_fromiovec(skb_put(*frag, count), msg->msg_iov, count)) {
- err = -EFAULT;
- goto fail;
- }
+ return -EFAULT;
+ if (memcpy_fromiovec(skb_put(*frag, count), msg->msg_iov, count))
+ return -EFAULT;
sent += count;
len -= count;
frag = &(*frag)->next;
}
- err = hci_send_acl(conn->hcon, skb, 0);
- if (err < 0)
- goto fail;
return sent;
+}
-fail:
- kfree_skb(skb);
- return err;
+static struct sk_buff *l2cap_create_connless_pdu(struct sock *sk, struct msghdr *msg, size_t len)
+{
+ struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sk_buff *skb;
+ int err, count, hlen = L2CAP_HDR_SIZE + 2;
+ struct l2cap_hdr *lh;
+
+ BT_DBG("sk %p len %d", sk, (int)len);
+
+ count = min_t(unsigned int, (conn->mtu - hlen), len);
+ skb = bt_skb_send_alloc(sk, count + hlen,
+ msg->msg_flags & MSG_DONTWAIT, &err);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ /* Create L2CAP header */
+ lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
+ lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
+ put_unaligned_le16(l2cap_pi(sk)->psm, skb_put(skb, 2));
+
+ err = l2cap_skbuff_fromiovec(sk, msg, len, count, skb);
+ if (unlikely(err < 0)) {
+ kfree_skb(skb);
+ return ERR_PTR(err);
+ }
+ return skb;
+}
+
+static struct sk_buff *l2cap_create_basic_pdu(struct sock *sk, struct msghdr *msg, size_t len)
+{
+ struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sk_buff *skb;
+ int err, count, hlen = L2CAP_HDR_SIZE;
+ struct l2cap_hdr *lh;
+
+ BT_DBG("sk %p len %d", sk, (int)len);
+
+ count = min_t(unsigned int, (conn->mtu - hlen), len);
+ skb = bt_skb_send_alloc(sk, count + hlen,
+ msg->msg_flags & MSG_DONTWAIT, &err);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ /* Create L2CAP header */
+ lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
+ lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
+
+ err = l2cap_skbuff_fromiovec(sk, msg, len, count, skb);
+ if (unlikely(err < 0)) {
+ kfree_skb(skb);
+ return ERR_PTR(err);
+ }
+ return skb;
+}
+
+static struct sk_buff *l2cap_create_iframe_pdu(struct sock *sk, struct msghdr *msg, size_t len, u16 control, u16 sdulen)
+{
+ struct l2cap_conn *conn = l2cap_pi(sk)->conn;
+ struct sk_buff *skb;
+ int err, count, hlen = L2CAP_HDR_SIZE + 2;
+ struct l2cap_hdr *lh;
+
+ BT_DBG("sk %p len %d", sk, (int)len);
+
+ if (sdulen)
+ hlen += 2;
+
+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16)
+ hlen += 2;
+
+ count = min_t(unsigned int, (conn->mtu - hlen), len);
+ skb = bt_skb_send_alloc(sk, count + hlen,
+ msg->msg_flags & MSG_DONTWAIT, &err);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ /* Create L2CAP header */
+ lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
+ lh->cid = cpu_to_le16(l2cap_pi(sk)->dcid);
+ lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
+ put_unaligned_le16(control, skb_put(skb, 2));
+ if (sdulen)
+ put_unaligned_le16(sdulen, skb_put(skb, 2));
+
+ err = l2cap_skbuff_fromiovec(sk, msg, len, count, skb);
+ if (unlikely(err < 0)) {
+ kfree_skb(skb);
+ return ERR_PTR(err);
+ }
+
+ if (l2cap_pi(sk)->fcs == L2CAP_FCS_CRC16)
+ put_unaligned_le16(0, skb_put(skb, 2));
+
+ bt_cb(skb)->retries = 0;
+ return skb;
+}
+
+static inline int l2cap_sar_segment_sdu(struct sock *sk, struct msghdr *msg, size_t len)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct sk_buff *skb;
+ struct sk_buff_head sar_queue;
+ u16 control;
+ size_t size = 0;
+
+ __skb_queue_head_init(&sar_queue);
+ control = L2CAP_SDU_START;
+ skb = l2cap_create_iframe_pdu(sk, msg, pi->max_pdu_size, control, len);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ __skb_queue_tail(&sar_queue, skb);
+ len -= pi->max_pdu_size;
+ size +=pi->max_pdu_size;
+ control = 0;
+
+ while (len > 0) {
+ size_t buflen;
+
+ if (len > pi->max_pdu_size) {
+ control |= L2CAP_SDU_CONTINUE;
+ buflen = pi->max_pdu_size;
+ } else {
+ control |= L2CAP_SDU_END;
+ buflen = len;
+ }
+
+ skb = l2cap_create_iframe_pdu(sk, msg, buflen, control, 0);
+ if (IS_ERR(skb)) {
+ skb_queue_purge(&sar_queue);
+ return PTR_ERR(skb);
+ }
+
+ __skb_queue_tail(&sar_queue, skb);
+ len -= buflen;
+ size += buflen;
+ control = 0;
+ }
+ skb_queue_splice_tail(&sar_queue, TX_QUEUE(sk));
+ if (sk->sk_send_head == NULL)
+ sk->sk_send_head = sar_queue.next;
+
+ return size;
}
static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
- int err = 0;
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct sk_buff *skb;
+ u16 control;
+ int err;
BT_DBG("sock %p, sk %p", sock, sk);
@@ -1200,16 +1600,73 @@
return -EOPNOTSUPP;
/* Check outgoing MTU */
- if (sk->sk_type != SOCK_RAW && len > l2cap_pi(sk)->omtu)
+ if (sk->sk_type == SOCK_SEQPACKET && pi->mode == L2CAP_MODE_BASIC
+ && len > pi->omtu)
return -EINVAL;
lock_sock(sk);
- if (sk->sk_state == BT_CONNECTED)
- err = l2cap_do_send(sk, msg, len);
- else
+ if (sk->sk_state != BT_CONNECTED) {
err = -ENOTCONN;
+ goto done;
+ }
+ /* Connectionless channel */
+ if (sk->sk_type == SOCK_DGRAM) {
+ skb = l2cap_create_connless_pdu(sk, msg, len);
+ err = l2cap_do_send(sk, skb);
+ goto done;
+ }
+
+ switch (pi->mode) {
+ case L2CAP_MODE_BASIC:
+ /* Create a basic PDU */
+ skb = l2cap_create_basic_pdu(sk, msg, len);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ goto done;
+ }
+
+ err = l2cap_do_send(sk, skb);
+ if (!err)
+ err = len;
+ break;
+
+ case L2CAP_MODE_ERTM:
+ case L2CAP_MODE_STREAMING:
+ /* Entire SDU fits into one PDU */
+ if (len <= pi->max_pdu_size) {
+ control = L2CAP_SDU_UNSEGMENTED;
+ skb = l2cap_create_iframe_pdu(sk, msg, len, control, 0);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ goto done;
+ }
+ __skb_queue_tail(TX_QUEUE(sk), skb);
+ if (sk->sk_send_head == NULL)
+ sk->sk_send_head = skb;
+ } else {
+ /* Segment SDU into multiples PDUs */
+ err = l2cap_sar_segment_sdu(sk, msg, len);
+ if (err < 0)
+ goto done;
+ }
+
+ if (pi->mode == L2CAP_MODE_STREAMING)
+ err = l2cap_streaming_send(sk);
+ else
+ err = l2cap_ertm_send(sk);
+
+ if (!err)
+ err = len;
+ break;
+
+ default:
+ BT_DBG("bad state %1.1x", pi->mode);
+ err = -EINVAL;
+ }
+
+done:
release_sock(sk);
return err;
}
@@ -1257,7 +1714,8 @@
opts.imtu = l2cap_pi(sk)->imtu;
opts.omtu = l2cap_pi(sk)->omtu;
opts.flush_to = l2cap_pi(sk)->flush_to;
- opts.mode = L2CAP_MODE_BASIC;
+ opts.mode = l2cap_pi(sk)->mode;
+ opts.fcs = l2cap_pi(sk)->fcs;
len = min_t(unsigned int, sizeof(opts), optlen);
if (copy_from_user((char *) &opts, optval, len)) {
@@ -1265,8 +1723,10 @@
break;
}
- l2cap_pi(sk)->imtu = opts.imtu;
- l2cap_pi(sk)->omtu = opts.omtu;
+ l2cap_pi(sk)->imtu = opts.imtu;
+ l2cap_pi(sk)->omtu = opts.omtu;
+ l2cap_pi(sk)->mode = opts.mode;
+ l2cap_pi(sk)->fcs = opts.fcs;
break;
case L2CAP_LM:
@@ -1379,7 +1839,8 @@
opts.imtu = l2cap_pi(sk)->imtu;
opts.omtu = l2cap_pi(sk)->omtu;
opts.flush_to = l2cap_pi(sk)->flush_to;
- opts.mode = L2CAP_MODE_BASIC;
+ opts.mode = l2cap_pi(sk)->mode;
+ opts.fcs = l2cap_pi(sk)->fcs;
len = min_t(unsigned int, len, sizeof(opts));
if (copy_to_user(optval, (char *) &opts, len))
@@ -1708,16 +2169,108 @@
*ptr += L2CAP_CONF_OPT_SIZE + len;
}
+static int l2cap_mode_supported(__u8 mode, __u32 feat_mask)
+{
+ u32 local_feat_mask = l2cap_feat_mask;
+ if (enable_ertm)
+ local_feat_mask |= L2CAP_FEAT_ERTM | L2CAP_FEAT_STREAMING;
+
+ switch (mode) {
+ case L2CAP_MODE_ERTM:
+ return L2CAP_FEAT_ERTM & feat_mask & local_feat_mask;
+ case L2CAP_MODE_STREAMING:
+ return L2CAP_FEAT_STREAMING & feat_mask & local_feat_mask;
+ default:
+ return 0x00;
+ }
+}
+
+static inline __u8 l2cap_select_mode(__u8 mode, __u16 remote_feat_mask)
+{
+ switch (mode) {
+ case L2CAP_MODE_STREAMING:
+ case L2CAP_MODE_ERTM:
+ if (l2cap_mode_supported(mode, remote_feat_mask))
+ return mode;
+ /* fall through */
+ default:
+ return L2CAP_MODE_BASIC;
+ }
+}
+
static int l2cap_build_conf_req(struct sock *sk, void *data)
{
struct l2cap_pinfo *pi = l2cap_pi(sk);
struct l2cap_conf_req *req = data;
+ struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_ERTM };
void *ptr = req->data;
BT_DBG("sk %p", sk);
- if (pi->imtu != L2CAP_DEFAULT_MTU)
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
+ if (pi->num_conf_req || pi->num_conf_rsp)
+ goto done;
+
+ switch (pi->mode) {
+ case L2CAP_MODE_STREAMING:
+ case L2CAP_MODE_ERTM:
+ pi->conf_state |= L2CAP_CONF_STATE2_DEVICE;
+ if (!l2cap_mode_supported(pi->mode, pi->conn->feat_mask))
+ l2cap_send_disconn_req(pi->conn, sk);
+ break;
+ default:
+ pi->mode = l2cap_select_mode(rfc.mode, pi->conn->feat_mask);
+ break;
+ }
+
+done:
+ switch (pi->mode) {
+ case L2CAP_MODE_BASIC:
+ if (pi->imtu != L2CAP_DEFAULT_MTU)
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
+ break;
+
+ case L2CAP_MODE_ERTM:
+ rfc.mode = L2CAP_MODE_ERTM;
+ rfc.txwin_size = L2CAP_DEFAULT_TX_WINDOW;
+ rfc.max_transmit = L2CAP_DEFAULT_MAX_TX;
+ rfc.retrans_timeout = 0;
+ rfc.monitor_timeout = 0;
+ rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
+ if (!(pi->conn->feat_mask & L2CAP_FEAT_FCS))
+ break;
+
+ if (pi->fcs == L2CAP_FCS_NONE ||
+ pi->conf_state & L2CAP_CONF_NO_FCS_RECV) {
+ pi->fcs = L2CAP_FCS_NONE;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, pi->fcs);
+ }
+ break;
+
+ case L2CAP_MODE_STREAMING:
+ rfc.mode = L2CAP_MODE_STREAMING;
+ rfc.txwin_size = 0;
+ rfc.max_transmit = 0;
+ rfc.retrans_timeout = 0;
+ rfc.monitor_timeout = 0;
+ rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
+ if (!(pi->conn->feat_mask & L2CAP_FEAT_FCS))
+ break;
+
+ if (pi->fcs == L2CAP_FCS_NONE ||
+ pi->conf_state & L2CAP_CONF_NO_FCS_RECV) {
+ pi->fcs = L2CAP_FCS_NONE;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, pi->fcs);
+ }
+ break;
+ }
/* FIXME: Need actual value of the flush timeout */
//if (flush_to != L2CAP_DEFAULT_FLUSH_TO)
@@ -1767,6 +2320,12 @@
memcpy(&rfc, (void *) val, olen);
break;
+ case L2CAP_CONF_FCS:
+ if (val == L2CAP_FCS_NONE)
+ pi->conf_state |= L2CAP_CONF_NO_FCS_RECV;
+
+ break;
+
default:
if (hint)
break;
@@ -1777,30 +2336,83 @@
}
}
+ if (pi->num_conf_rsp || pi->num_conf_req)
+ goto done;
+
+ switch (pi->mode) {
+ case L2CAP_MODE_STREAMING:
+ case L2CAP_MODE_ERTM:
+ pi->conf_state |= L2CAP_CONF_STATE2_DEVICE;
+ if (!l2cap_mode_supported(pi->mode, pi->conn->feat_mask))
+ return -ECONNREFUSED;
+ break;
+ default:
+ pi->mode = l2cap_select_mode(rfc.mode, pi->conn->feat_mask);
+ break;
+ }
+
+done:
+ if (pi->mode != rfc.mode) {
+ result = L2CAP_CONF_UNACCEPT;
+ rfc.mode = pi->mode;
+
+ if (pi->num_conf_rsp == 1)
+ return -ECONNREFUSED;
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+ }
+
+
if (result == L2CAP_CONF_SUCCESS) {
/* Configure output options and let the other side know
* which ones we don't like. */
- if (rfc.mode == L2CAP_MODE_BASIC) {
- if (mtu < pi->omtu)
- result = L2CAP_CONF_UNACCEPT;
- else {
- pi->omtu = mtu;
- pi->conf_state |= L2CAP_CONF_OUTPUT_DONE;
- }
+ if (mtu < L2CAP_DEFAULT_MIN_MTU)
+ result = L2CAP_CONF_UNACCEPT;
+ else {
+ pi->omtu = mtu;
+ pi->conf_state |= L2CAP_CONF_MTU_DONE;
+ }
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
- } else {
+ switch (rfc.mode) {
+ case L2CAP_MODE_BASIC:
+ pi->fcs = L2CAP_FCS_NONE;
+ pi->conf_state |= L2CAP_CONF_MODE_DONE;
+ break;
+
+ case L2CAP_MODE_ERTM:
+ pi->remote_tx_win = rfc.txwin_size;
+ pi->remote_max_tx = rfc.max_transmit;
+ pi->max_pdu_size = rfc.max_pdu_size;
+
+ rfc.retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
+ rfc.monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
+
+ pi->conf_state |= L2CAP_CONF_MODE_DONE;
+ break;
+
+ case L2CAP_MODE_STREAMING:
+ pi->remote_tx_win = rfc.txwin_size;
+ pi->max_pdu_size = rfc.max_pdu_size;
+
+ pi->conf_state |= L2CAP_CONF_MODE_DONE;
+ break;
+
+ default:
result = L2CAP_CONF_UNACCEPT;
memset(&rfc, 0, sizeof(rfc));
- rfc.mode = L2CAP_MODE_BASIC;
-
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
- sizeof(rfc), (unsigned long) &rfc);
+ rfc.mode = pi->mode;
}
- }
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
+ if (result == L2CAP_CONF_SUCCESS)
+ pi->conf_state |= L2CAP_CONF_OUTPUT_DONE;
+ }
rsp->scid = cpu_to_le16(pi->dcid);
rsp->result = cpu_to_le16(result);
rsp->flags = cpu_to_le16(0x0000);
@@ -1808,6 +2420,73 @@
return ptr - data;
}
+static int l2cap_parse_conf_rsp(struct sock *sk, void *rsp, int len, void *data, u16 *result)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct l2cap_conf_req *req = data;
+ void *ptr = req->data;
+ int type, olen;
+ unsigned long val;
+ struct l2cap_conf_rfc rfc;
+
+ BT_DBG("sk %p, rsp %p, len %d, req %p", sk, rsp, len, data);
+
+ while (len >= L2CAP_CONF_OPT_SIZE) {
+ len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
+
+ switch (type) {
+ case L2CAP_CONF_MTU:
+ if (val < L2CAP_DEFAULT_MIN_MTU) {
+ *result = L2CAP_CONF_UNACCEPT;
+ pi->omtu = L2CAP_DEFAULT_MIN_MTU;
+ } else
+ pi->omtu = val;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
+ break;
+
+ case L2CAP_CONF_FLUSH_TO:
+ pi->flush_to = val;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_FLUSH_TO,
+ 2, pi->flush_to);
+ break;
+
+ case L2CAP_CONF_RFC:
+ if (olen == sizeof(rfc))
+ memcpy(&rfc, (void *)val, olen);
+
+ if ((pi->conf_state & L2CAP_CONF_STATE2_DEVICE) &&
+ rfc.mode != pi->mode)
+ return -ECONNREFUSED;
+
+ pi->mode = rfc.mode;
+ pi->fcs = 0;
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+ break;
+ }
+ }
+
+ if (*result == L2CAP_CONF_SUCCESS) {
+ switch (rfc.mode) {
+ case L2CAP_MODE_ERTM:
+ pi->remote_tx_win = rfc.txwin_size;
+ pi->retrans_timeout = rfc.retrans_timeout;
+ pi->monitor_timeout = rfc.monitor_timeout;
+ pi->max_pdu_size = le16_to_cpu(rfc.max_pdu_size);
+ break;
+ case L2CAP_MODE_STREAMING:
+ pi->max_pdu_size = le16_to_cpu(rfc.max_pdu_size);
+ break;
+ }
+ }
+
+ req->dcid = cpu_to_le16(pi->dcid);
+ req->flags = cpu_to_le16(0x0000);
+
+ return ptr - data;
+}
+
static int l2cap_build_conf_rsp(struct sock *sk, void *data, u16 result, u16 flags)
{
struct l2cap_conf_rsp *rsp = data;
@@ -1994,6 +2673,7 @@
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(sk, req), req);
+ l2cap_pi(sk)->num_conf_req++;
break;
case L2CAP_CR_PEND:
@@ -2052,10 +2732,13 @@
/* Complete config. */
len = l2cap_parse_conf_req(sk, rsp);
- if (len < 0)
+ if (len < 0) {
+ l2cap_send_disconn_req(conn, sk);
goto unlock;
+ }
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
+ l2cap_pi(sk)->num_conf_rsp++;
/* Reset config buffer. */
l2cap_pi(sk)->conf_len = 0;
@@ -2064,7 +2747,22 @@
goto unlock;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
+ if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV)
+ || l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
+ l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+
sk->sk_state = BT_CONNECTED;
+ l2cap_pi(sk)->next_tx_seq = 0;
+ l2cap_pi(sk)->expected_ack_seq = 0;
+ l2cap_pi(sk)->unacked_frames = 0;
+
+ setup_timer(&l2cap_pi(sk)->retrans_timer,
+ l2cap_retrans_timeout, (unsigned long) sk);
+ setup_timer(&l2cap_pi(sk)->monitor_timer,
+ l2cap_monitor_timeout, (unsigned long) sk);
+
+ __skb_queue_head_init(TX_QUEUE(sk));
+ __skb_queue_head_init(SREJ_QUEUE(sk));
l2cap_chan_ready(sk);
goto unlock;
}
@@ -2073,6 +2771,7 @@
u8 buf[64];
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(sk, buf), buf);
+ l2cap_pi(sk)->num_conf_req++;
}
unlock:
@@ -2102,29 +2801,32 @@
break;
case L2CAP_CONF_UNACCEPT:
- if (++l2cap_pi(sk)->conf_retry < L2CAP_CONF_MAX_RETRIES) {
- char req[128];
- /* It does not make sense to adjust L2CAP parameters
- * that are currently defined in the spec. We simply
- * resend config request that we sent earlier. It is
- * stupid, but it helps qualification testing which
- * expects at least some response from us. */
- l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
- l2cap_build_conf_req(sk, req), req);
- goto done;
+ if (l2cap_pi(sk)->num_conf_rsp <= L2CAP_CONF_MAX_CONF_RSP) {
+ int len = cmd->len - sizeof(*rsp);
+ char req[64];
+
+ /* throw out any old stored conf requests */
+ result = L2CAP_CONF_SUCCESS;
+ len = l2cap_parse_conf_rsp(sk, rsp->data,
+ len, req, &result);
+ if (len < 0) {
+ l2cap_send_disconn_req(conn, sk);
+ goto done;
+ }
+
+ l2cap_send_cmd(conn, l2cap_get_ident(conn),
+ L2CAP_CONF_REQ, len, req);
+ l2cap_pi(sk)->num_conf_req++;
+ if (result != L2CAP_CONF_SUCCESS)
+ goto done;
+ break;
}
default:
sk->sk_state = BT_DISCONN;
sk->sk_err = ECONNRESET;
l2cap_sock_set_timer(sk, HZ * 5);
- {
- struct l2cap_disconn_req req;
- req.dcid = cpu_to_le16(l2cap_pi(sk)->dcid);
- req.scid = cpu_to_le16(l2cap_pi(sk)->scid);
- l2cap_send_cmd(conn, l2cap_get_ident(conn),
- L2CAP_DISCONN_REQ, sizeof(req), &req);
- }
+ l2cap_send_disconn_req(conn, sk);
goto done;
}
@@ -2134,7 +2836,16 @@
l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
+ if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV)
+ || l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
+ l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+
sk->sk_state = BT_CONNECTED;
+ l2cap_pi(sk)->expected_tx_seq = 0;
+ l2cap_pi(sk)->buffer_seq = 0;
+ l2cap_pi(sk)->num_to_ack = 0;
+ __skb_queue_head_init(TX_QUEUE(sk));
+ __skb_queue_head_init(SREJ_QUEUE(sk));
l2cap_chan_ready(sk);
}
@@ -2165,6 +2876,11 @@
sk->sk_shutdown = SHUTDOWN_MASK;
+ skb_queue_purge(TX_QUEUE(sk));
+ skb_queue_purge(SREJ_QUEUE(sk));
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+ del_timer(&l2cap_pi(sk)->monitor_timer);
+
l2cap_chan_del(sk, ECONNRESET);
bh_unlock_sock(sk);
@@ -2187,6 +2903,11 @@
if (!sk)
return 0;
+ skb_queue_purge(TX_QUEUE(sk));
+ skb_queue_purge(SREJ_QUEUE(sk));
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+ del_timer(&l2cap_pi(sk)->monitor_timer);
+
l2cap_chan_del(sk, 0);
bh_unlock_sock(sk);
@@ -2205,10 +2926,14 @@
if (type == L2CAP_IT_FEAT_MASK) {
u8 buf[8];
+ u32 feat_mask = l2cap_feat_mask;
struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) buf;
rsp->type = cpu_to_le16(L2CAP_IT_FEAT_MASK);
rsp->result = cpu_to_le16(L2CAP_IR_SUCCESS);
- put_unaligned(cpu_to_le32(l2cap_feat_mask), (__le32 *) rsp->data);
+ if (enable_ertm)
+ feat_mask |= L2CAP_FEAT_ERTM | L2CAP_FEAT_STREAMING
+ | L2CAP_FEAT_FCS;
+ put_unaligned_le32(feat_mask, rsp->data);
l2cap_send_cmd(conn, cmd->ident,
L2CAP_INFO_RSP, sizeof(buf), buf);
} else if (type == L2CAP_IT_FIXED_CHAN) {
@@ -2359,9 +3084,374 @@
kfree_skb(skb);
}
+static int l2cap_check_fcs(struct l2cap_pinfo *pi, struct sk_buff *skb)
+{
+ u16 our_fcs, rcv_fcs;
+ int hdr_size = L2CAP_HDR_SIZE + 2;
+
+ if (pi->fcs == L2CAP_FCS_CRC16) {
+ skb_trim(skb, skb->len - 2);
+ rcv_fcs = get_unaligned_le16(skb->data + skb->len);
+ our_fcs = crc16(0, skb->data - hdr_size, skb->len + hdr_size);
+
+ if (our_fcs != rcv_fcs)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void l2cap_add_to_srej_queue(struct sock *sk, struct sk_buff *skb, u8 tx_seq, u8 sar)
+{
+ struct sk_buff *next_skb;
+
+ bt_cb(skb)->tx_seq = tx_seq;
+ bt_cb(skb)->sar = sar;
+
+ next_skb = skb_peek(SREJ_QUEUE(sk));
+ if (!next_skb) {
+ __skb_queue_tail(SREJ_QUEUE(sk), skb);
+ return;
+ }
+
+ do {
+ if (bt_cb(next_skb)->tx_seq > tx_seq) {
+ __skb_queue_before(SREJ_QUEUE(sk), next_skb, skb);
+ return;
+ }
+
+ if (skb_queue_is_last(SREJ_QUEUE(sk), next_skb))
+ break;
+
+ } while((next_skb = skb_queue_next(SREJ_QUEUE(sk), next_skb)));
+
+ __skb_queue_tail(SREJ_QUEUE(sk), skb);
+}
+
+static int l2cap_sar_reassembly_sdu(struct sock *sk, struct sk_buff *skb, u16 control)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct sk_buff *_skb;
+ int err = -EINVAL;
+
+ switch (control & L2CAP_CTRL_SAR) {
+ case L2CAP_SDU_UNSEGMENTED:
+ if (pi->conn_state & L2CAP_CONN_SAR_SDU) {
+ kfree_skb(pi->sdu);
+ break;
+ }
+
+ err = sock_queue_rcv_skb(sk, skb);
+ if (!err)
+ return 0;
+
+ break;
+
+ case L2CAP_SDU_START:
+ if (pi->conn_state & L2CAP_CONN_SAR_SDU) {
+ kfree_skb(pi->sdu);
+ break;
+ }
+
+ pi->sdu_len = get_unaligned_le16(skb->data);
+ skb_pull(skb, 2);
+
+ pi->sdu = bt_skb_alloc(pi->sdu_len, GFP_ATOMIC);
+ if (!pi->sdu) {
+ err = -ENOMEM;
+ break;
+ }
+
+ memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+
+ pi->conn_state |= L2CAP_CONN_SAR_SDU;
+ pi->partial_sdu_len = skb->len;
+ err = 0;
+ break;
+
+ case L2CAP_SDU_CONTINUE:
+ if (!(pi->conn_state & L2CAP_CONN_SAR_SDU))
+ break;
+
+ memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+
+ pi->partial_sdu_len += skb->len;
+ if (pi->partial_sdu_len > pi->sdu_len)
+ kfree_skb(pi->sdu);
+ else
+ err = 0;
+
+ break;
+
+ case L2CAP_SDU_END:
+ if (!(pi->conn_state & L2CAP_CONN_SAR_SDU))
+ break;
+
+ memcpy(skb_put(pi->sdu, skb->len), skb->data, skb->len);
+
+ pi->conn_state &= ~L2CAP_CONN_SAR_SDU;
+ pi->partial_sdu_len += skb->len;
+
+ if (pi->partial_sdu_len == pi->sdu_len) {
+ _skb = skb_clone(pi->sdu, GFP_ATOMIC);
+ err = sock_queue_rcv_skb(sk, _skb);
+ if (err < 0)
+ kfree_skb(_skb);
+ }
+ kfree_skb(pi->sdu);
+ err = 0;
+
+ break;
+ }
+
+ kfree_skb(skb);
+ return err;
+}
+
+static void l2cap_check_srej_gap(struct sock *sk, u8 tx_seq)
+{
+ struct sk_buff *skb;
+ u16 control = 0;
+
+ while((skb = skb_peek(SREJ_QUEUE(sk)))) {
+ if (bt_cb(skb)->tx_seq != tx_seq)
+ break;
+
+ skb = skb_dequeue(SREJ_QUEUE(sk));
+ control |= bt_cb(skb)->sar << L2CAP_CTRL_SAR_SHIFT;
+ l2cap_sar_reassembly_sdu(sk, skb, control);
+ l2cap_pi(sk)->buffer_seq_srej =
+ (l2cap_pi(sk)->buffer_seq_srej + 1) % 64;
+ tx_seq++;
+ }
+}
+
+static void l2cap_resend_srejframe(struct sock *sk, u8 tx_seq)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct srej_list *l, *tmp;
+ u16 control;
+
+ list_for_each_entry_safe(l,tmp, SREJ_LIST(sk), list) {
+ if (l->tx_seq == tx_seq) {
+ list_del(&l->list);
+ kfree(l);
+ return;
+ }
+ control = L2CAP_SUPER_SELECT_REJECT;
+ control |= l->tx_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ l2cap_send_sframe(pi, control);
+ list_del(&l->list);
+ list_add_tail(&l->list, SREJ_LIST(sk));
+ }
+}
+
+static void l2cap_send_srejframe(struct sock *sk, u8 tx_seq)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ struct srej_list *new;
+ u16 control;
+
+ while (tx_seq != pi->expected_tx_seq) {
+ control = L2CAP_SUPER_SELECT_REJECT;
+ control |= pi->expected_tx_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ if (pi->conn_state & L2CAP_CONN_SEND_PBIT) {
+ control |= L2CAP_CTRL_POLL;
+ pi->conn_state &= ~L2CAP_CONN_SEND_PBIT;
+ }
+ l2cap_send_sframe(pi, control);
+
+ new = kzalloc(sizeof(struct srej_list), GFP_ATOMIC);
+ new->tx_seq = pi->expected_tx_seq++;
+ list_add_tail(&new->list, SREJ_LIST(sk));
+ }
+ pi->expected_tx_seq++;
+}
+
+static inline int l2cap_data_channel_iframe(struct sock *sk, u16 rx_control, struct sk_buff *skb)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ u8 tx_seq = __get_txseq(rx_control);
+ u16 tx_control = 0;
+ u8 sar = rx_control >> L2CAP_CTRL_SAR_SHIFT;
+ int err = 0;
+
+ BT_DBG("sk %p rx_control 0x%4.4x len %d", sk, rx_control, skb->len);
+
+ if (tx_seq == pi->expected_tx_seq)
+ goto expected;
+
+ if (pi->conn_state & L2CAP_CONN_SREJ_SENT) {
+ struct srej_list *first;
+
+ first = list_first_entry(SREJ_LIST(sk),
+ struct srej_list, list);
+ if (tx_seq == first->tx_seq) {
+ l2cap_add_to_srej_queue(sk, skb, tx_seq, sar);
+ l2cap_check_srej_gap(sk, tx_seq);
+
+ list_del(&first->list);
+ kfree(first);
+
+ if (list_empty(SREJ_LIST(sk))) {
+ pi->buffer_seq = pi->buffer_seq_srej;
+ pi->conn_state &= ~L2CAP_CONN_SREJ_SENT;
+ }
+ } else {
+ struct srej_list *l;
+ l2cap_add_to_srej_queue(sk, skb, tx_seq, sar);
+
+ list_for_each_entry(l, SREJ_LIST(sk), list) {
+ if (l->tx_seq == tx_seq) {
+ l2cap_resend_srejframe(sk, tx_seq);
+ return 0;
+ }
+ }
+ l2cap_send_srejframe(sk, tx_seq);
+ }
+ } else {
+ pi->conn_state |= L2CAP_CONN_SREJ_SENT;
+
+ INIT_LIST_HEAD(SREJ_LIST(sk));
+ pi->buffer_seq_srej = pi->buffer_seq;
+
+ __skb_queue_head_init(SREJ_QUEUE(sk));
+ l2cap_add_to_srej_queue(sk, skb, tx_seq, sar);
+
+ pi->conn_state |= L2CAP_CONN_SEND_PBIT;
+
+ l2cap_send_srejframe(sk, tx_seq);
+ }
+ return 0;
+
+expected:
+ pi->expected_tx_seq = (pi->expected_tx_seq + 1) % 64;
+
+ if (pi->conn_state & L2CAP_CONN_SREJ_SENT) {
+ l2cap_add_to_srej_queue(sk, skb, tx_seq, sar);
+ return 0;
+ }
+
+ pi->buffer_seq = (pi->buffer_seq + 1) % 64;
+
+ err = l2cap_sar_reassembly_sdu(sk, skb, rx_control);
+ if (err < 0)
+ return err;
+
+ pi->num_to_ack = (pi->num_to_ack + 1) % L2CAP_DEFAULT_NUM_TO_ACK;
+ if (pi->num_to_ack == L2CAP_DEFAULT_NUM_TO_ACK - 1) {
+ tx_control |= L2CAP_SUPER_RCV_READY;
+ tx_control |= pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+ l2cap_send_sframe(pi, tx_control);
+ }
+ return 0;
+}
+
+static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, struct sk_buff *skb)
+{
+ struct l2cap_pinfo *pi = l2cap_pi(sk);
+ u8 tx_seq = __get_reqseq(rx_control);
+
+ BT_DBG("sk %p rx_control 0x%4.4x len %d", sk, rx_control, skb->len);
+
+ switch (rx_control & L2CAP_CTRL_SUPERVISE) {
+ case L2CAP_SUPER_RCV_READY:
+ if (rx_control & L2CAP_CTRL_POLL) {
+ u16 control = L2CAP_CTRL_FINAL;
+ control |= L2CAP_SUPER_RCV_READY |
+ (pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT);
+ l2cap_send_sframe(l2cap_pi(sk), control);
+ pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+
+ } else if (rx_control & L2CAP_CTRL_FINAL) {
+ pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ pi->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(sk);
+
+ if (!(pi->conn_state & L2CAP_CONN_WAIT_F))
+ break;
+
+ pi->conn_state &= ~L2CAP_CONN_WAIT_F;
+ del_timer(&pi->monitor_timer);
+
+ if (pi->unacked_frames > 0)
+ __mod_retrans_timer();
+ } else {
+ pi->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(sk);
+
+ if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY)
+ && (pi->unacked_frames > 0))
+ __mod_retrans_timer();
+
+ l2cap_ertm_send(sk);
+ pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+ }
+ break;
+
+ case L2CAP_SUPER_REJECT:
+ pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+
+ pi->expected_ack_seq = __get_reqseq(rx_control);
+ l2cap_drop_acked_frames(sk);
+
+ sk->sk_send_head = TX_QUEUE(sk)->next;
+ pi->next_tx_seq = pi->expected_ack_seq;
+
+ l2cap_ertm_send(sk);
+
+ break;
+
+ case L2CAP_SUPER_SELECT_REJECT:
+ pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
+
+ if (rx_control & L2CAP_CTRL_POLL) {
+ l2cap_retransmit_frame(sk, tx_seq);
+ pi->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(sk);
+ l2cap_ertm_send(sk);
+ if (pi->conn_state & L2CAP_CONN_WAIT_F) {
+ pi->srej_save_reqseq = tx_seq;
+ pi->conn_state |= L2CAP_CONN_SREJ_ACT;
+ }
+ } else if (rx_control & L2CAP_CTRL_FINAL) {
+ if ((pi->conn_state & L2CAP_CONN_SREJ_ACT) &&
+ pi->srej_save_reqseq == tx_seq)
+ pi->srej_save_reqseq &= ~L2CAP_CONN_SREJ_ACT;
+ else
+ l2cap_retransmit_frame(sk, tx_seq);
+ }
+ else {
+ l2cap_retransmit_frame(sk, tx_seq);
+ if (pi->conn_state & L2CAP_CONN_WAIT_F) {
+ pi->srej_save_reqseq = tx_seq;
+ pi->conn_state |= L2CAP_CONN_SREJ_ACT;
+ }
+ }
+ break;
+
+ case L2CAP_SUPER_RCV_NOT_READY:
+ pi->conn_state |= L2CAP_CONN_REMOTE_BUSY;
+ pi->expected_ack_seq = tx_seq;
+ l2cap_drop_acked_frames(sk);
+
+ del_timer(&l2cap_pi(sk)->retrans_timer);
+ if (rx_control & L2CAP_CTRL_POLL) {
+ u16 control = L2CAP_CTRL_FINAL;
+ l2cap_send_rr_or_rnr(l2cap_pi(sk), control);
+ }
+ break;
+ }
+
+ return 0;
+}
+
static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk_buff *skb)
{
struct sock *sk;
+ struct l2cap_pinfo *pi;
+ u16 control, len;
+ u8 tx_seq;
+ int err;
sk = l2cap_get_chan_by_scid(&conn->chan_list, cid);
if (!sk) {
@@ -2369,22 +3459,91 @@
goto drop;
}
+ pi = l2cap_pi(sk);
+
BT_DBG("sk %p, len %d", sk, skb->len);
if (sk->sk_state != BT_CONNECTED)
goto drop;
- if (l2cap_pi(sk)->imtu < skb->len)
- goto drop;
+ switch (pi->mode) {
+ case L2CAP_MODE_BASIC:
+ /* If socket recv buffers overflows we drop data here
+ * which is *bad* because L2CAP has to be reliable.
+ * But we don't have any other choice. L2CAP doesn't
+ * provide flow control mechanism. */
- /* If socket recv buffers overflows we drop data here
- * which is *bad* because L2CAP has to be reliable.
- * But we don't have any other choice. L2CAP doesn't
- * provide flow control mechanism. */
+ if (pi->imtu < skb->len)
+ goto drop;
- if (!sock_queue_rcv_skb(sk, skb))
+ if (!sock_queue_rcv_skb(sk, skb))
+ goto done;
+ break;
+
+ case L2CAP_MODE_ERTM:
+ control = get_unaligned_le16(skb->data);
+ skb_pull(skb, 2);
+ len = skb->len;
+
+ if (__is_sar_start(control))
+ len -= 2;
+
+ if (pi->fcs == L2CAP_FCS_CRC16)
+ len -= 2;
+
+ /*
+ * We can just drop the corrupted I-frame here.
+ * Receiver will miss it and start proper recovery
+ * procedures and ask retransmission.
+ */
+ if (len > L2CAP_DEFAULT_MAX_PDU_SIZE)
+ goto drop;
+
+ if (l2cap_check_fcs(pi, skb))
+ goto drop;
+
+ if (__is_iframe(control))
+ err = l2cap_data_channel_iframe(sk, control, skb);
+ else
+ err = l2cap_data_channel_sframe(sk, control, skb);
+
+ if (!err)
+ goto done;
+ break;
+
+ case L2CAP_MODE_STREAMING:
+ control = get_unaligned_le16(skb->data);
+ skb_pull(skb, 2);
+ len = skb->len;
+
+ if (__is_sar_start(control))
+ len -= 2;
+
+ if (pi->fcs == L2CAP_FCS_CRC16)
+ len -= 2;
+
+ if (len > L2CAP_DEFAULT_MAX_PDU_SIZE || __is_sframe(control))
+ goto drop;
+
+ if (l2cap_check_fcs(pi, skb))
+ goto drop;
+
+ tx_seq = __get_txseq(control);
+
+ if (pi->expected_tx_seq == tx_seq)
+ pi->expected_tx_seq = (pi->expected_tx_seq + 1) % 64;
+ else
+ pi->expected_tx_seq = tx_seq + 1;
+
+ err = l2cap_sar_reassembly_sdu(sk, skb, control);
+
goto done;
+ default:
+ BT_DBG("sk %p: bad mode 0x%2.2x", sk, l2cap_pi(sk)->mode);
+ break;
+ }
+
drop:
kfree_skb(skb);
@@ -2433,6 +3592,11 @@
cid = __le16_to_cpu(lh->cid);
len = __le16_to_cpu(lh->len);
+ if (len != skb->len) {
+ kfree_skb(skb);
+ return;
+ }
+
BT_DBG("len %d, cid 0x%4.4x", len, cid);
switch (cid) {
@@ -2441,7 +3605,7 @@
break;
case L2CAP_CID_CONN_LESS:
- psm = get_unaligned((__le16 *) skb->data);
+ psm = get_unaligned_le16(skb->data);
skb_pull(skb, 2);
l2cap_conless_channel(conn, psm, skb);
break;
@@ -2828,6 +3992,9 @@
module_init(l2cap_init);
module_exit(l2cap_exit);
+module_param(enable_ertm, bool, 0644);
+MODULE_PARM_DESC(enable_ertm, "Enable enhanced retransmission mode");
+
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 94b3388..25692bc 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -244,6 +244,33 @@
auth_type);
}
+static void rfcomm_session_timeout(unsigned long arg)
+{
+ struct rfcomm_session *s = (void *) arg;
+
+ BT_DBG("session %p state %ld", s, s->state);
+
+ set_bit(RFCOMM_TIMED_OUT, &s->flags);
+ rfcomm_session_put(s);
+ rfcomm_schedule(RFCOMM_SCHED_TIMEO);
+}
+
+static void rfcomm_session_set_timer(struct rfcomm_session *s, long timeout)
+{
+ BT_DBG("session %p state %ld timeout %ld", s, s->state, timeout);
+
+ if (!mod_timer(&s->timer, jiffies + timeout))
+ rfcomm_session_hold(s);
+}
+
+static void rfcomm_session_clear_timer(struct rfcomm_session *s)
+{
+ BT_DBG("session %p state %ld", s, s->state);
+
+ if (timer_pending(&s->timer) && del_timer(&s->timer))
+ rfcomm_session_put(s);
+}
+
/* ---- RFCOMM DLCs ---- */
static void rfcomm_dlc_timeout(unsigned long arg)
{
@@ -320,6 +347,7 @@
rfcomm_session_hold(s);
+ rfcomm_session_clear_timer(s);
rfcomm_dlc_hold(d);
list_add(&d->list, &s->dlcs);
d->session = s;
@@ -335,6 +363,9 @@
d->session = NULL;
rfcomm_dlc_put(d);
+ if (list_empty(&s->dlcs))
+ rfcomm_session_set_timer(s, RFCOMM_IDLE_TIMEOUT);
+
rfcomm_session_put(s);
}
@@ -567,6 +598,8 @@
BT_DBG("session %p sock %p", s, sock);
+ setup_timer(&s->timer, rfcomm_session_timeout, (unsigned long) s);
+
INIT_LIST_HEAD(&s->dlcs);
s->state = state;
s->sock = sock;
@@ -598,6 +631,7 @@
if (state == BT_CONNECTED)
rfcomm_send_disc(s, 0);
+ rfcomm_session_clear_timer(s);
sock_release(s->sock);
kfree(s);
@@ -639,6 +673,7 @@
__rfcomm_dlc_close(d, err);
}
+ rfcomm_session_clear_timer(s);
rfcomm_session_put(s);
}
@@ -1879,6 +1914,12 @@
struct rfcomm_session *s;
s = list_entry(p, struct rfcomm_session, list);
+ if (test_and_clear_bit(RFCOMM_TIMED_OUT, &s->flags)) {
+ s->state = BT_DISCONN;
+ rfcomm_send_disc(s, 0);
+ continue;
+ }
+
if (s->state == BT_LISTEN) {
rfcomm_accept_connection(s);
continue;
@@ -2080,7 +2121,7 @@
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
- int ret;
+ int err;
l2cap_load();
@@ -2088,33 +2129,35 @@
rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- ret = PTR_ERR(rfcomm_thread);
- goto out_thread;
+ err = PTR_ERR(rfcomm_thread);
+ goto unregister;
}
if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");
- ret = rfcomm_init_ttys();
- if (ret)
- goto out_tty;
+ err = rfcomm_init_ttys();
+ if (err < 0)
+ goto stop;
- ret = rfcomm_init_sockets();
- if (ret)
- goto out_sock;
+ err = rfcomm_init_sockets();
+ if (err < 0)
+ goto cleanup;
BT_INFO("RFCOMM ver %s", VERSION);
return 0;
-out_sock:
+cleanup:
rfcomm_cleanup_ttys();
-out_tty:
+
+stop:
kthread_stop(rfcomm_thread);
-out_thread:
+
+unregister:
hci_unregister_cb(&rfcomm_cb);
- return ret;
+ return err;
}
static void __exit rfcomm_exit(void)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 51ae0c3..13c27f1 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -359,20 +359,9 @@
sock_put(sk);
}
-/* Close socket.
- * Must be called on unlocked socket.
- */
-static void sco_sock_close(struct sock *sk)
+static void __sco_sock_close(struct sock *sk)
{
- struct sco_conn *conn;
-
- sco_sock_clear_timer(sk);
-
- lock_sock(sk);
-
- conn = sco_pi(sk)->conn;
-
- BT_DBG("sk %p state %d conn %p socket %p", sk, sk->sk_state, conn, sk->sk_socket);
+ BT_DBG("sk %p state %d socket %p", sk, sk->sk_state, sk->sk_socket);
switch (sk->sk_state) {
case BT_LISTEN:
@@ -390,9 +379,15 @@
sock_set_flag(sk, SOCK_ZAPPED);
break;
}
+}
+/* Must be called on unlocked socket. */
+static void sco_sock_close(struct sock *sk)
+{
+ sco_sock_clear_timer(sk);
+ lock_sock(sk);
+ __sco_sock_close(sk);
release_sock(sk);
-
sco_sock_kill(sk);
}
@@ -748,6 +743,30 @@
return err;
}
+static int sco_sock_shutdown(struct socket *sock, int how)
+{
+ struct sock *sk = sock->sk;
+ int err = 0;
+
+ BT_DBG("sock %p, sk %p", sock, sk);
+
+ if (!sk)
+ return 0;
+
+ lock_sock(sk);
+ if (!sk->sk_shutdown) {
+ sk->sk_shutdown = SHUTDOWN_MASK;
+ sco_sock_clear_timer(sk);
+ __sco_sock_close(sk);
+
+ if (sock_flag(sk, SOCK_LINGER) && sk->sk_lingertime)
+ err = bt_sock_wait_state(sk, BT_CLOSED,
+ sk->sk_lingertime);
+ }
+ release_sock(sk);
+ return err;
+}
+
static int sco_sock_release(struct socket *sock)
{
struct sock *sk = sock->sk;
@@ -969,7 +988,7 @@
.ioctl = bt_sock_ioctl,
.mmap = sock_no_mmap,
.socketpair = sock_no_socketpair,
- .shutdown = sock_no_shutdown,
+ .shutdown = sco_sock_shutdown,
.setsockopt = sco_sock_setsockopt,
.getsockopt = sco_sock_getsockopt
};
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 18538d7..07a0777 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -20,7 +20,7 @@
#include "br_private.h"
/* net device transmit always called with no BH (preempt_disabled) */
-int br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
const unsigned char *dest = skb->data;
@@ -39,7 +39,7 @@
else
br_flood_deliver(br, skb);
- return 0;
+ return NETDEV_TX_OK;
}
static int br_dev_open(struct net_device *dev)
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index d2c27c8..bc1704a 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -22,7 +22,8 @@
static inline int should_deliver(const struct net_bridge_port *p,
const struct sk_buff *skb)
{
- return (skb->dev != p->dev && p->state == BR_STATE_FORWARDING);
+ return (((p->flags & BR_HAIRPIN_MODE) || skb->dev != p->dev) &&
+ p->state == BR_STATE_FORWARDING);
}
static inline unsigned packet_length(const struct sk_buff *skb)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index eb404dc..142ebac 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -256,6 +256,7 @@
p->path_cost = port_cost(dev);
p->priority = 0x8000 >> BR_PORT_BITS;
p->port_no = index;
+ p->flags = 0;
br_init_port(p);
p->state = BR_STATE_DISABLED;
br_stp_port_timer_init(p);
@@ -263,6 +264,10 @@
return p;
}
+static struct device_type br_type = {
+ .name = "bridge",
+};
+
int br_add_bridge(struct net *net, const char *name)
{
struct net_device *dev;
@@ -279,6 +284,8 @@
goto out_free;
}
+ SET_NETDEV_DEVTYPE(dev, &br_type);
+
ret = register_netdevice(dev);
if (ret)
goto out_free;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index d22f611..907a82e 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -359,7 +359,7 @@
},
.proto = 0,
};
- struct in_device *in_dev = in_dev_get(dev);
+ struct in_device *in_dev = __in_dev_get_rcu(dev);
/* If err equals -EHOSTUNREACH the error is due to a
* martian destination or due to the fact that
@@ -905,46 +905,62 @@
* For br_nf_post_routing, we need (prio = NF_BR_PRI_LAST), because
* ip_refrag() can return NF_STOLEN. */
static struct nf_hook_ops br_nf_ops[] __read_mostly = {
- { .hook = br_nf_pre_routing,
- .owner = THIS_MODULE,
- .pf = PF_BRIDGE,
- .hooknum = NF_BR_PRE_ROUTING,
- .priority = NF_BR_PRI_BRNF, },
- { .hook = br_nf_local_in,
- .owner = THIS_MODULE,
- .pf = PF_BRIDGE,
- .hooknum = NF_BR_LOCAL_IN,
- .priority = NF_BR_PRI_BRNF, },
- { .hook = br_nf_forward_ip,
- .owner = THIS_MODULE,
- .pf = PF_BRIDGE,
- .hooknum = NF_BR_FORWARD,
- .priority = NF_BR_PRI_BRNF - 1, },
- { .hook = br_nf_forward_arp,
- .owner = THIS_MODULE,
- .pf = PF_BRIDGE,
- .hooknum = NF_BR_FORWARD,
- .priority = NF_BR_PRI_BRNF, },
- { .hook = br_nf_local_out,
- .owner = THIS_MODULE,
- .pf = PF_BRIDGE,
- .hooknum = NF_BR_LOCAL_OUT,
- .priority = NF_BR_PRI_FIRST, },
- { .hook = br_nf_post_routing,
- .owner = THIS_MODULE,
- .pf = PF_BRIDGE,
- .hooknum = NF_BR_POST_ROUTING,
- .priority = NF_BR_PRI_LAST, },
- { .hook = ip_sabotage_in,
- .owner = THIS_MODULE,
- .pf = PF_INET,
- .hooknum = NF_INET_PRE_ROUTING,
- .priority = NF_IP_PRI_FIRST, },
- { .hook = ip_sabotage_in,
- .owner = THIS_MODULE,
- .pf = PF_INET6,
- .hooknum = NF_INET_PRE_ROUTING,
- .priority = NF_IP6_PRI_FIRST, },
+ {
+ .hook = br_nf_pre_routing,
+ .owner = THIS_MODULE,
+ .pf = PF_BRIDGE,
+ .hooknum = NF_BR_PRE_ROUTING,
+ .priority = NF_BR_PRI_BRNF,
+ },
+ {
+ .hook = br_nf_local_in,
+ .owner = THIS_MODULE,
+ .pf = PF_BRIDGE,
+ .hooknum = NF_BR_LOCAL_IN,
+ .priority = NF_BR_PRI_BRNF,
+ },
+ {
+ .hook = br_nf_forward_ip,
+ .owner = THIS_MODULE,
+ .pf = PF_BRIDGE,
+ .hooknum = NF_BR_FORWARD,
+ .priority = NF_BR_PRI_BRNF - 1,
+ },
+ {
+ .hook = br_nf_forward_arp,
+ .owner = THIS_MODULE,
+ .pf = PF_BRIDGE,
+ .hooknum = NF_BR_FORWARD,
+ .priority = NF_BR_PRI_BRNF,
+ },
+ {
+ .hook = br_nf_local_out,
+ .owner = THIS_MODULE,
+ .pf = PF_BRIDGE,
+ .hooknum = NF_BR_LOCAL_OUT,
+ .priority = NF_BR_PRI_FIRST,
+ },
+ {
+ .hook = br_nf_post_routing,
+ .owner = THIS_MODULE,
+ .pf = PF_BRIDGE,
+ .hooknum = NF_BR_POST_ROUTING,
+ .priority = NF_BR_PRI_LAST,
+ },
+ {
+ .hook = ip_sabotage_in,
+ .owner = THIS_MODULE,
+ .pf = PF_INET,
+ .hooknum = NF_INET_PRE_ROUTING,
+ .priority = NF_IP_PRI_FIRST,
+ },
+ {
+ .hook = ip_sabotage_in,
+ .owner = THIS_MODULE,
+ .pf = PF_INET6,
+ .hooknum = NF_INET_PRE_ROUTING,
+ .priority = NF_IP6_PRI_FIRST,
+ },
};
#ifdef CONFIG_SYSCTL
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index d5b5537..2114e45 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -81,6 +81,9 @@
struct timer_list message_age_timer;
struct kobject kobj;
struct rcu_head rcu;
+
+ unsigned long flags;
+#define BR_HAIRPIN_MODE 0x00000001
};
struct net_bridge
@@ -140,7 +143,8 @@
/* br_device.c */
extern void br_dev_setup(struct net_device *dev);
-extern int br_dev_xmit(struct sk_buff *skb, struct net_device *dev);
+extern netdev_tx_t br_dev_xmit(struct sk_buff *skb,
+ struct net_device *dev);
/* br_fdb.c */
extern int br_fdb_init(void);
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 0660515..fd3f8d6 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -21,7 +21,7 @@
*/
#define MESSAGE_AGE_INCR ((HZ < 256) ? 1 : (HZ/256))
-static const char *br_port_state_names[] = {
+static const char *const br_port_state_names[] = {
[BR_STATE_DISABLED] = "disabled",
[BR_STATE_LISTENING] = "listening",
[BR_STATE_LEARNING] = "learning",
diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c
index 4a3cdf8..820643a 100644
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -143,6 +143,22 @@
}
static BRPORT_ATTR(flush, S_IWUSR, NULL, store_flush);
+static ssize_t show_hairpin_mode(struct net_bridge_port *p, char *buf)
+{
+ int hairpin_mode = (p->flags & BR_HAIRPIN_MODE) ? 1 : 0;
+ return sprintf(buf, "%d\n", hairpin_mode);
+}
+static ssize_t store_hairpin_mode(struct net_bridge_port *p, unsigned long v)
+{
+ if (v)
+ p->flags |= BR_HAIRPIN_MODE;
+ else
+ p->flags &= ~BR_HAIRPIN_MODE;
+ return 0;
+}
+static BRPORT_ATTR(hairpin_mode, S_IRUGO | S_IWUSR,
+ show_hairpin_mode, store_hairpin_mode);
+
static struct brport_attribute *brport_attrs[] = {
&brport_attr_path_cost,
&brport_attr_priority,
@@ -159,6 +175,7 @@
&brport_attr_forward_delay_timer,
&brport_attr_hold_timer,
&brport_attr_flush,
+ &brport_attr_hairpin_mode,
NULL
};
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index a94f3cc..e4ea3fd 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -50,14 +50,6 @@
unsigned char ip_dst[4];
};
-static void print_MAC(const unsigned char *p)
-{
- int i;
-
- for (i = 0; i < ETH_ALEN; i++, p++)
- printk("%02x%c", *p, i == ETH_ALEN - 1 ? ' ':':');
-}
-
static void
print_ports(const struct sk_buff *skb, uint8_t protocol, int offset)
{
@@ -88,14 +80,11 @@
unsigned int bitmask;
spin_lock_bh(&ebt_log_lock);
- printk("<%c>%s IN=%s OUT=%s MAC source = ", '0' + loginfo->u.log.level,
- prefix, in ? in->name : "", out ? out->name : "");
-
- print_MAC(eth_hdr(skb)->h_source);
- printk("MAC dest = ");
- print_MAC(eth_hdr(skb)->h_dest);
-
- printk("proto = 0x%04x", ntohs(eth_hdr(skb)->h_proto));
+ printk("<%c>%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
+ '0' + loginfo->u.log.level, prefix,
+ in ? in->name : "", out ? out->name : "",
+ eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest,
+ ntohs(eth_hdr(skb)->h_proto));
if (loginfo->type == NF_LOG_TYPE_LOG)
bitmask = loginfo->u.log.logflags;
@@ -171,12 +160,8 @@
printk(" INCOMPLETE ARP payload");
goto out;
}
- printk(" ARP MAC SRC=");
- print_MAC(ap->mac_src);
- printk(" ARP IP SRC=%pI4", ap->ip_src);
- printk(" ARP MAC DST=");
- print_MAC(ap->mac_dst);
- printk(" ARP IP DST=%pI4", ap->ip_dst);
+ printk(" ARP MAC SRC=%pM ARP IP SRC=%pI4 ARP MAC DST=%pM ARP IP DST=%pI4",
+ ap->mac_src, ap->ip_src, ap->mac_dst, ap->ip_dst);
}
}
out:
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index 133eeae..ce50688 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -266,7 +266,7 @@
if (uloginfo->qthreshold > EBT_ULOG_MAX_QLEN)
uloginfo->qthreshold = EBT_ULOG_MAX_QLEN;
- return 0;
+ return true;
}
static struct xt_target ebt_ulog_tg_reg __read_mostly = {
diff --git a/net/bridge/netfilter/ebtable_broute.c b/net/bridge/netfilter/ebtable_broute.c
index c751111..d32ab13 100644
--- a/net/bridge/netfilter/ebtable_broute.c
+++ b/net/bridge/netfilter/ebtable_broute.c
@@ -41,7 +41,7 @@
return 0;
}
-static struct ebt_table broute_table =
+static const struct ebt_table broute_table =
{
.name = "broute",
.table = &initial_table,
diff --git a/net/bridge/netfilter/ebtable_filter.c b/net/bridge/netfilter/ebtable_filter.c
index a5eea72..60b1a6c 100644
--- a/net/bridge/netfilter/ebtable_filter.c
+++ b/net/bridge/netfilter/ebtable_filter.c
@@ -50,7 +50,7 @@
return 0;
}
-static struct ebt_table frame_filter =
+static const struct ebt_table frame_filter =
{
.name = "filter",
.table = &initial_table,
@@ -77,21 +77,21 @@
{
.hook = ebt_in_hook,
.owner = THIS_MODULE,
- .pf = PF_BRIDGE,
+ .pf = NFPROTO_BRIDGE,
.hooknum = NF_BR_LOCAL_IN,
.priority = NF_BR_PRI_FILTER_BRIDGED,
},
{
.hook = ebt_in_hook,
.owner = THIS_MODULE,
- .pf = PF_BRIDGE,
+ .pf = NFPROTO_BRIDGE,
.hooknum = NF_BR_FORWARD,
.priority = NF_BR_PRI_FILTER_BRIDGED,
},
{
.hook = ebt_out_hook,
.owner = THIS_MODULE,
- .pf = PF_BRIDGE,
+ .pf = NFPROTO_BRIDGE,
.hooknum = NF_BR_LOCAL_OUT,
.priority = NF_BR_PRI_FILTER_OTHER,
},
diff --git a/net/bridge/netfilter/ebtable_nat.c b/net/bridge/netfilter/ebtable_nat.c
index 6024c55..4a98804 100644
--- a/net/bridge/netfilter/ebtable_nat.c
+++ b/net/bridge/netfilter/ebtable_nat.c
@@ -77,21 +77,21 @@
{
.hook = ebt_nat_out,
.owner = THIS_MODULE,
- .pf = PF_BRIDGE,
+ .pf = NFPROTO_BRIDGE,
.hooknum = NF_BR_LOCAL_OUT,
.priority = NF_BR_PRI_NAT_DST_OTHER,
},
{
.hook = ebt_nat_out,
.owner = THIS_MODULE,
- .pf = PF_BRIDGE,
+ .pf = NFPROTO_BRIDGE,
.hooknum = NF_BR_POST_ROUTING,
.priority = NF_BR_PRI_NAT_SRC,
},
{
.hook = ebt_nat_in,
.owner = THIS_MODULE,
- .pf = PF_BRIDGE,
+ .pf = NFPROTO_BRIDGE,
.hooknum = NF_BR_PRE_ROUTING,
.priority = NF_BR_PRI_NAT_DST_BRIDGED,
},
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 37928d5..bd1c654 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1103,23 +1103,24 @@
return ret;
}
-struct ebt_table *ebt_register_table(struct net *net, struct ebt_table *table)
+struct ebt_table *
+ebt_register_table(struct net *net, const struct ebt_table *input_table)
{
struct ebt_table_info *newinfo;
- struct ebt_table *t;
+ struct ebt_table *t, *table;
struct ebt_replace_kernel *repl;
int ret, i, countersize;
void *p;
- if (!table || !(repl = table->table) || !repl->entries ||
- repl->entries_size == 0 ||
- repl->counters || table->private) {
+ if (input_table == NULL || (repl = input_table->table) == NULL ||
+ repl->entries == 0 || repl->entries_size == 0 ||
+ repl->counters != NULL || input_table->private != NULL) {
BUGPRINT("Bad table data for ebt_register_table!!!\n");
return ERR_PTR(-EINVAL);
}
/* Don't add one table to multiple lists. */
- table = kmemdup(table, sizeof(struct ebt_table), GFP_KERNEL);
+ table = kmemdup(input_table, sizeof(struct ebt_table), GFP_KERNEL);
if (!table) {
ret = -ENOMEM;
goto out;
diff --git a/net/can/af_can.c b/net/can/af_can.c
index e733725..ef1c43a 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -651,12 +651,16 @@
struct can_frame *cf = (struct can_frame *)skb->data;
int matches;
- if (dev->type != ARPHRD_CAN || !net_eq(dev_net(dev), &init_net)) {
- kfree_skb(skb);
- return 0;
- }
+ if (!net_eq(dev_net(dev), &init_net))
+ goto drop;
- BUG_ON(skb->len != sizeof(struct can_frame) || cf->can_dlc > 8);
+ if (WARN_ONCE(dev->type != ARPHRD_CAN ||
+ skb->len != sizeof(struct can_frame) ||
+ cf->can_dlc > 8,
+ "PF_CAN: dropped non conform skbuf: "
+ "dev type %d, len %d, can_dlc %d\n",
+ dev->type, skb->len, cf->can_dlc))
+ goto drop;
/* update statistics */
can_stats.rx_frames++;
@@ -682,7 +686,11 @@
can_stats.matches_delta++;
}
- return 0;
+ return NET_RX_SUCCESS;
+
+drop:
+ kfree_skb(skb);
+ return NET_RX_DROP;
}
/*
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 72720c7..597da4f 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -46,6 +46,7 @@
#include <linux/hrtimer.h>
#include <linux/list.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/uio.h>
#include <linux/net.h>
#include <linux/netdevice.h>
@@ -146,23 +147,18 @@
return "???";
}
-static int bcm_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int bcm_proc_show(struct seq_file *m, void *v)
{
- int len = 0;
- struct sock *sk = (struct sock *)data;
+ struct sock *sk = (struct sock *)m->private;
struct bcm_sock *bo = bcm_sk(sk);
struct bcm_op *op;
- len += snprintf(page + len, PAGE_SIZE - len, ">>> socket %p",
- sk->sk_socket);
- len += snprintf(page + len, PAGE_SIZE - len, " / sk %p", sk);
- len += snprintf(page + len, PAGE_SIZE - len, " / bo %p", bo);
- len += snprintf(page + len, PAGE_SIZE - len, " / dropped %lu",
- bo->dropped_usr_msgs);
- len += snprintf(page + len, PAGE_SIZE - len, " / bound %s",
- bcm_proc_getifname(bo->ifindex));
- len += snprintf(page + len, PAGE_SIZE - len, " <<<\n");
+ seq_printf(m, ">>> socket %p", sk->sk_socket);
+ seq_printf(m, " / sk %p", sk);
+ seq_printf(m, " / bo %p", bo);
+ seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs);
+ seq_printf(m, " / bound %s", bcm_proc_getifname(bo->ifindex));
+ seq_printf(m, " <<<\n");
list_for_each_entry(op, &bo->rx_ops, list) {
@@ -172,71 +168,62 @@
if (!op->frames_abs)
continue;
- len += snprintf(page + len, PAGE_SIZE - len,
- "rx_op: %03X %-5s ",
+ seq_printf(m, "rx_op: %03X %-5s ",
op->can_id, bcm_proc_getifname(op->ifindex));
- len += snprintf(page + len, PAGE_SIZE - len, "[%d]%c ",
- op->nframes,
+ seq_printf(m, "[%d]%c ", op->nframes,
(op->flags & RX_CHECK_DLC)?'d':' ');
if (op->kt_ival1.tv64)
- len += snprintf(page + len, PAGE_SIZE - len,
- "timeo=%lld ",
+ seq_printf(m, "timeo=%lld ",
(long long)
ktime_to_us(op->kt_ival1));
if (op->kt_ival2.tv64)
- len += snprintf(page + len, PAGE_SIZE - len,
- "thr=%lld ",
+ seq_printf(m, "thr=%lld ",
(long long)
ktime_to_us(op->kt_ival2));
- len += snprintf(page + len, PAGE_SIZE - len,
- "# recv %ld (%ld) => reduction: ",
+ seq_printf(m, "# recv %ld (%ld) => reduction: ",
op->frames_filtered, op->frames_abs);
reduction = 100 - (op->frames_filtered * 100) / op->frames_abs;
- len += snprintf(page + len, PAGE_SIZE - len, "%s%ld%%\n",
+ seq_printf(m, "%s%ld%%\n",
(reduction == 100)?"near ":"", reduction);
-
- if (len > PAGE_SIZE - 200) {
- /* mark output cut off */
- len += snprintf(page + len, PAGE_SIZE - len, "(..)\n");
- break;
- }
}
list_for_each_entry(op, &bo->tx_ops, list) {
- len += snprintf(page + len, PAGE_SIZE - len,
- "tx_op: %03X %s [%d] ",
+ seq_printf(m, "tx_op: %03X %s [%d] ",
op->can_id, bcm_proc_getifname(op->ifindex),
op->nframes);
if (op->kt_ival1.tv64)
- len += snprintf(page + len, PAGE_SIZE - len, "t1=%lld ",
+ seq_printf(m, "t1=%lld ",
(long long) ktime_to_us(op->kt_ival1));
if (op->kt_ival2.tv64)
- len += snprintf(page + len, PAGE_SIZE - len, "t2=%lld ",
+ seq_printf(m, "t2=%lld ",
(long long) ktime_to_us(op->kt_ival2));
- len += snprintf(page + len, PAGE_SIZE - len, "# sent %ld\n",
- op->frames_abs);
-
- if (len > PAGE_SIZE - 100) {
- /* mark output cut off */
- len += snprintf(page + len, PAGE_SIZE - len, "(..)\n");
- break;
- }
+ seq_printf(m, "# sent %ld\n", op->frames_abs);
}
-
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
-
- *eof = 1;
- return len;
+ seq_putc(m, '\n');
+ return 0;
}
+static int bcm_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, bcm_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations bcm_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = bcm_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface
* of the given bcm tx op
@@ -1515,9 +1502,9 @@
if (proc_dir) {
/* unique socket address as filename */
sprintf(bo->procname, "%p", sock);
- bo->bcm_proc_read = create_proc_read_entry(bo->procname, 0644,
- proc_dir,
- bcm_read_proc, sk);
+ bo->bcm_proc_read = proc_create_data(bo->procname, 0644,
+ proc_dir,
+ &bcm_proc_fops, sk);
}
return 0;
diff --git a/net/can/proc.c b/net/can/proc.c
index 1463653..9b9ad29 100644
--- a/net/can/proc.c
+++ b/net/can/proc.c
@@ -196,8 +196,8 @@
*
*/
-static int can_print_rcvlist(char *page, int len, struct hlist_head *rx_list,
- struct net_device *dev)
+static void can_print_rcvlist(struct seq_file *m, struct hlist_head *rx_list,
+ struct net_device *dev)
{
struct receiver *r;
struct hlist_node *n;
@@ -208,199 +208,188 @@
" %-5s %08X %08x %08x %08x %8ld %s\n" :
" %-5s %03X %08x %08lx %08lx %8ld %s\n";
- len += snprintf(page + len, PAGE_SIZE - len, fmt,
- DNAME(dev), r->can_id, r->mask,
+ seq_printf(m, fmt, DNAME(dev), r->can_id, r->mask,
(unsigned long)r->func, (unsigned long)r->data,
r->matches, r->ident);
-
- /* does a typical line fit into the current buffer? */
-
- /* 100 Bytes before end of buffer */
- if (len > PAGE_SIZE - 100) {
- /* mark output cut off */
- len += snprintf(page + len, PAGE_SIZE - len,
- " (..)\n");
- break;
- }
}
rcu_read_unlock();
-
- return len;
}
-static int can_print_recv_banner(char *page, int len)
+static void can_print_recv_banner(struct seq_file *m)
{
/*
* can1. 00000000 00000000 00000000
* ....... 0 tp20
*/
- len += snprintf(page + len, PAGE_SIZE - len,
- " device can_id can_mask function"
+ seq_puts(m, " device can_id can_mask function"
" userdata matches ident\n");
-
- return len;
}
-static int can_proc_read_stats(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int can_stats_proc_show(struct seq_file *m, void *v)
{
- int len = 0;
+ seq_putc(m, '\n');
+ seq_printf(m, " %8ld transmitted frames (TXF)\n", can_stats.tx_frames);
+ seq_printf(m, " %8ld received frames (RXF)\n", can_stats.rx_frames);
+ seq_printf(m, " %8ld matched frames (RXMF)\n", can_stats.matches);
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld transmitted frames (TXF)\n",
- can_stats.tx_frames);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld received frames (RXF)\n", can_stats.rx_frames);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld matched frames (RXMF)\n", can_stats.matches);
-
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
+ seq_putc(m, '\n');
if (can_stattimer.function == can_stat_update) {
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld %% total match ratio (RXMR)\n",
+ seq_printf(m, " %8ld %% total match ratio (RXMR)\n",
can_stats.total_rx_match_ratio);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld frames/s total tx rate (TXR)\n",
+ seq_printf(m, " %8ld frames/s total tx rate (TXR)\n",
can_stats.total_tx_rate);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld frames/s total rx rate (RXR)\n",
+ seq_printf(m, " %8ld frames/s total rx rate (RXR)\n",
can_stats.total_rx_rate);
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
+ seq_putc(m, '\n');
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld %% current match ratio (CRXMR)\n",
+ seq_printf(m, " %8ld %% current match ratio (CRXMR)\n",
can_stats.current_rx_match_ratio);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld frames/s current tx rate (CTXR)\n",
+ seq_printf(m, " %8ld frames/s current tx rate (CTXR)\n",
can_stats.current_tx_rate);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld frames/s current rx rate (CRXR)\n",
+ seq_printf(m, " %8ld frames/s current rx rate (CRXR)\n",
can_stats.current_rx_rate);
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
+ seq_putc(m, '\n');
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld %% max match ratio (MRXMR)\n",
+ seq_printf(m, " %8ld %% max match ratio (MRXMR)\n",
can_stats.max_rx_match_ratio);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld frames/s max tx rate (MTXR)\n",
+ seq_printf(m, " %8ld frames/s max tx rate (MTXR)\n",
can_stats.max_tx_rate);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld frames/s max rx rate (MRXR)\n",
+ seq_printf(m, " %8ld frames/s max rx rate (MRXR)\n",
can_stats.max_rx_rate);
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
+ seq_putc(m, '\n');
}
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld current receive list entries (CRCV)\n",
+ seq_printf(m, " %8ld current receive list entries (CRCV)\n",
can_pstats.rcv_entries);
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld maximum receive list entries (MRCV)\n",
+ seq_printf(m, " %8ld maximum receive list entries (MRCV)\n",
can_pstats.rcv_entries_max);
if (can_pstats.stats_reset)
- len += snprintf(page + len, PAGE_SIZE - len,
- "\n %8ld statistic resets (STR)\n",
+ seq_printf(m, "\n %8ld statistic resets (STR)\n",
can_pstats.stats_reset);
if (can_pstats.user_reset)
- len += snprintf(page + len, PAGE_SIZE - len,
- " %8ld user statistic resets (USTR)\n",
+ seq_printf(m, " %8ld user statistic resets (USTR)\n",
can_pstats.user_reset);
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
-
- *eof = 1;
- return len;
+ seq_putc(m, '\n');
+ return 0;
}
-static int can_proc_read_reset_stats(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int can_stats_proc_open(struct inode *inode, struct file *file)
{
- int len = 0;
+ return single_open(file, can_stats_proc_show, NULL);
+}
+static const struct file_operations can_stats_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = can_stats_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int can_reset_stats_proc_show(struct seq_file *m, void *v)
+{
user_reset = 1;
if (can_stattimer.function == can_stat_update) {
- len += snprintf(page + len, PAGE_SIZE - len,
- "Scheduled statistic reset #%ld.\n",
+ seq_printf(m, "Scheduled statistic reset #%ld.\n",
can_pstats.stats_reset + 1);
} else {
if (can_stats.jiffies_init != jiffies)
can_init_stats();
- len += snprintf(page + len, PAGE_SIZE - len,
- "Performed statistic reset #%ld.\n",
+ seq_printf(m, "Performed statistic reset #%ld.\n",
can_pstats.stats_reset);
}
-
- *eof = 1;
- return len;
+ return 0;
}
-static int can_proc_read_version(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int can_reset_stats_proc_open(struct inode *inode, struct file *file)
{
- int len = 0;
-
- len += snprintf(page + len, PAGE_SIZE - len, "%s\n",
- CAN_VERSION_STRING);
- *eof = 1;
- return len;
+ return single_open(file, can_reset_stats_proc_show, NULL);
}
-static int can_proc_read_rcvlist(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static const struct file_operations can_reset_stats_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = can_reset_stats_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int can_version_proc_show(struct seq_file *m, void *v)
+{
+ seq_printf(m, "%s\n", CAN_VERSION_STRING);
+ return 0;
+}
+
+static int can_version_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, can_version_proc_show, NULL);
+}
+
+static const struct file_operations can_version_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = can_version_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int can_rcvlist_proc_show(struct seq_file *m, void *v)
{
/* double cast to prevent GCC warning */
- int idx = (int)(long)data;
- int len = 0;
+ int idx = (int)(long)m->private;
struct dev_rcv_lists *d;
struct hlist_node *n;
- len += snprintf(page + len, PAGE_SIZE - len,
- "\nreceive list '%s':\n", rx_list_name[idx]);
+ seq_printf(m, "\nreceive list '%s':\n", rx_list_name[idx]);
rcu_read_lock();
hlist_for_each_entry_rcu(d, n, &can_rx_dev_list, list) {
if (!hlist_empty(&d->rx[idx])) {
- len = can_print_recv_banner(page, len);
- len = can_print_rcvlist(page, len, &d->rx[idx], d->dev);
+ can_print_recv_banner(m);
+ can_print_rcvlist(m, &d->rx[idx], d->dev);
} else
- len += snprintf(page + len, PAGE_SIZE - len,
- " (%s: no entry)\n", DNAME(d->dev));
-
- /* exit on end of buffer? */
- if (len > PAGE_SIZE - 100)
- break;
+ seq_printf(m, " (%s: no entry)\n", DNAME(d->dev));
}
rcu_read_unlock();
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
-
- *eof = 1;
- return len;
+ seq_putc(m, '\n');
+ return 0;
}
-static int can_proc_read_rcvlist_sff(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int can_rcvlist_proc_open(struct inode *inode, struct file *file)
{
- int len = 0;
+ return single_open(file, can_rcvlist_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations can_rcvlist_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = can_rcvlist_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int can_rcvlist_sff_proc_show(struct seq_file *m, void *v)
+{
struct dev_rcv_lists *d;
struct hlist_node *n;
/* RX_SFF */
- len += snprintf(page + len, PAGE_SIZE - len,
- "\nreceive list 'rx_sff':\n");
+ seq_puts(m, "\nreceive list 'rx_sff':\n");
rcu_read_lock();
hlist_for_each_entry_rcu(d, n, &can_rx_dev_list, list) {
@@ -413,46 +402,38 @@
}
if (!all_empty) {
- len = can_print_recv_banner(page, len);
+ can_print_recv_banner(m);
for (i = 0; i < 0x800; i++) {
- if (!hlist_empty(&d->rx_sff[i]) &&
- len < PAGE_SIZE - 100)
- len = can_print_rcvlist(page, len,
- &d->rx_sff[i],
- d->dev);
+ if (!hlist_empty(&d->rx_sff[i]))
+ can_print_rcvlist(m, &d->rx_sff[i],
+ d->dev);
}
} else
- len += snprintf(page + len, PAGE_SIZE - len,
- " (%s: no entry)\n", DNAME(d->dev));
-
- /* exit on end of buffer? */
- if (len > PAGE_SIZE - 100)
- break;
+ seq_printf(m, " (%s: no entry)\n", DNAME(d->dev));
}
rcu_read_unlock();
- len += snprintf(page + len, PAGE_SIZE - len, "\n");
-
- *eof = 1;
- return len;
+ seq_putc(m, '\n');
+ return 0;
}
+static int can_rcvlist_sff_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, can_rcvlist_sff_proc_show, NULL);
+}
+
+static const struct file_operations can_rcvlist_sff_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = can_rcvlist_sff_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* proc utility functions
*/
-static struct proc_dir_entry *can_create_proc_readentry(const char *name,
- mode_t mode,
- read_proc_t *read_proc,
- void *data)
-{
- if (can_dir)
- return create_proc_read_entry(name, mode, can_dir, read_proc,
- data);
- else
- return NULL;
-}
-
static void can_remove_proc_readentry(const char *name)
{
if (can_dir)
@@ -474,24 +455,24 @@
}
/* own procfs entries from the AF_CAN core */
- pde_version = can_create_proc_readentry(CAN_PROC_VERSION, 0644,
- can_proc_read_version, NULL);
- pde_stats = can_create_proc_readentry(CAN_PROC_STATS, 0644,
- can_proc_read_stats, NULL);
- pde_reset_stats = can_create_proc_readentry(CAN_PROC_RESET_STATS, 0644,
- can_proc_read_reset_stats, NULL);
- pde_rcvlist_err = can_create_proc_readentry(CAN_PROC_RCVLIST_ERR, 0644,
- can_proc_read_rcvlist, (void *)RX_ERR);
- pde_rcvlist_all = can_create_proc_readentry(CAN_PROC_RCVLIST_ALL, 0644,
- can_proc_read_rcvlist, (void *)RX_ALL);
- pde_rcvlist_fil = can_create_proc_readentry(CAN_PROC_RCVLIST_FIL, 0644,
- can_proc_read_rcvlist, (void *)RX_FIL);
- pde_rcvlist_inv = can_create_proc_readentry(CAN_PROC_RCVLIST_INV, 0644,
- can_proc_read_rcvlist, (void *)RX_INV);
- pde_rcvlist_eff = can_create_proc_readentry(CAN_PROC_RCVLIST_EFF, 0644,
- can_proc_read_rcvlist, (void *)RX_EFF);
- pde_rcvlist_sff = can_create_proc_readentry(CAN_PROC_RCVLIST_SFF, 0644,
- can_proc_read_rcvlist_sff, NULL);
+ pde_version = proc_create(CAN_PROC_VERSION, 0644, can_dir,
+ &can_version_proc_fops);
+ pde_stats = proc_create(CAN_PROC_STATS, 0644, can_dir,
+ &can_stats_proc_fops);
+ pde_reset_stats = proc_create(CAN_PROC_RESET_STATS, 0644, can_dir,
+ &can_reset_stats_proc_fops);
+ pde_rcvlist_err = proc_create_data(CAN_PROC_RCVLIST_ERR, 0644, can_dir,
+ &can_rcvlist_proc_fops, (void *)RX_ERR);
+ pde_rcvlist_all = proc_create_data(CAN_PROC_RCVLIST_ALL, 0644, can_dir,
+ &can_rcvlist_proc_fops, (void *)RX_ALL);
+ pde_rcvlist_fil = proc_create_data(CAN_PROC_RCVLIST_FIL, 0644, can_dir,
+ &can_rcvlist_proc_fops, (void *)RX_FIL);
+ pde_rcvlist_inv = proc_create_data(CAN_PROC_RCVLIST_INV, 0644, can_dir,
+ &can_rcvlist_proc_fops, (void *)RX_INV);
+ pde_rcvlist_eff = proc_create_data(CAN_PROC_RCVLIST_EFF, 0644, can_dir,
+ &can_rcvlist_proc_fops, (void *)RX_EFF);
+ pde_rcvlist_sff = proc_create(CAN_PROC_RCVLIST_SFF, 0644, can_dir,
+ &can_rcvlist_sff_proc_fops);
}
/*
diff --git a/net/compat.c b/net/compat.c
index 8d73905..12728b1 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -743,6 +743,18 @@
return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
}
+asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned flags)
+{
+ return sys_recv(fd, buf, len, flags | MSG_CMSG_COMPAT);
+}
+
+asmlinkage long compat_sys_recvfrom(int fd, void __user *buf, size_t len,
+ unsigned flags, struct sockaddr __user *addr,
+ int __user *addrlen)
+{
+ return sys_recvfrom(fd, buf, len, flags | MSG_CMSG_COMPAT, addr, addrlen);
+}
+
asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
{
int ret;
@@ -788,10 +800,11 @@
ret = sys_sendto(a0, compat_ptr(a1), a[2], a[3], compat_ptr(a[4]), a[5]);
break;
case SYS_RECV:
- ret = sys_recv(a0, compat_ptr(a1), a[2], a[3]);
+ ret = compat_sys_recv(a0, compat_ptr(a1), a[2], a[3]);
break;
case SYS_RECVFROM:
- ret = sys_recvfrom(a0, compat_ptr(a1), a[2], a[3], compat_ptr(a[4]), compat_ptr(a[5]));
+ ret = compat_sys_recvfrom(a0, compat_ptr(a1), a[2], a[3],
+ compat_ptr(a[4]), compat_ptr(a[5]));
break;
case SYS_SHUTDOWN:
ret = sys_shutdown(a0,a1);
diff --git a/net/core/datagram.c b/net/core/datagram.c
index b0fe692..1c6cf3a 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -55,6 +55,7 @@
#include <net/checksum.h>
#include <net/sock.h>
#include <net/tcp_states.h>
+#include <trace/events/skb.h>
/*
* Is a socket 'connection oriented' ?
@@ -284,6 +285,8 @@
int i, copy = start - offset;
struct sk_buff *frag_iter;
+ trace_skb_copy_datagram_iovec(skb, len);
+
/* Copy header. */
if (copy > 0) {
if (copy > len)
diff --git a/net/core/dev.c b/net/core/dev.c
index 6a94475..8494547 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -191,7 +191,6 @@
* semaphore held.
*/
DEFINE_RWLOCK(dev_base_lock);
-
EXPORT_SYMBOL(dev_base_lock);
#define NETDEV_HASHBITS 8
@@ -248,6 +247,7 @@
*/
DEFINE_PER_CPU(struct softnet_data, softnet_data);
+EXPORT_PER_CPU_SYMBOL(softnet_data);
#ifdef CONFIG_LOCKDEP
/*
@@ -269,10 +269,10 @@
ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL,
ARPHRD_FCFABRIC, ARPHRD_IEEE802_TR, ARPHRD_IEEE80211,
ARPHRD_IEEE80211_PRISM, ARPHRD_IEEE80211_RADIOTAP, ARPHRD_PHONET,
- ARPHRD_PHONET_PIPE, ARPHRD_IEEE802154, ARPHRD_IEEE802154_PHY,
+ ARPHRD_PHONET_PIPE, ARPHRD_IEEE802154,
ARPHRD_VOID, ARPHRD_NONE};
-static const char *netdev_lock_name[] =
+static const char *const netdev_lock_name[] =
{"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25",
"_xmit_PRONET", "_xmit_CHAOS", "_xmit_IEEE802", "_xmit_ARCNET",
"_xmit_APPLETLK", "_xmit_DLCI", "_xmit_ATM", "_xmit_METRICOM",
@@ -287,7 +287,7 @@
"_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL",
"_xmit_FCFABRIC", "_xmit_IEEE802_TR", "_xmit_IEEE80211",
"_xmit_IEEE80211_PRISM", "_xmit_IEEE80211_RADIOTAP", "_xmit_PHONET",
- "_xmit_PHONET_PIPE", "_xmit_IEEE802154", "_xmit_IEEE802154_PHY",
+ "_xmit_PHONET_PIPE", "_xmit_IEEE802154",
"_xmit_VOID", "_xmit_NONE"};
static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)];
@@ -381,6 +381,7 @@
}
spin_unlock_bh(&ptype_lock);
}
+EXPORT_SYMBOL(dev_add_pack);
/**
* __dev_remove_pack - remove packet handler
@@ -418,6 +419,8 @@
out:
spin_unlock_bh(&ptype_lock);
}
+EXPORT_SYMBOL(__dev_remove_pack);
+
/**
* dev_remove_pack - remove packet handler
* @pt: packet type declaration
@@ -436,6 +439,7 @@
synchronize_net();
}
+EXPORT_SYMBOL(dev_remove_pack);
/******************************************************************************
@@ -499,6 +503,7 @@
}
return 0;
}
+EXPORT_SYMBOL(netdev_boot_setup_check);
/**
@@ -591,6 +596,7 @@
}
return NULL;
}
+EXPORT_SYMBOL(__dev_get_by_name);
/**
* dev_get_by_name - find a device by its name
@@ -615,6 +621,7 @@
read_unlock(&dev_base_lock);
return dev;
}
+EXPORT_SYMBOL(dev_get_by_name);
/**
* __dev_get_by_index - find a device by its ifindex
@@ -640,6 +647,7 @@
}
return NULL;
}
+EXPORT_SYMBOL(__dev_get_by_index);
/**
@@ -664,6 +672,7 @@
read_unlock(&dev_base_lock);
return dev;
}
+EXPORT_SYMBOL(dev_get_by_index);
/**
* dev_getbyhwaddr - find a device by its hardware address
@@ -693,7 +702,6 @@
return NULL;
}
-
EXPORT_SYMBOL(dev_getbyhwaddr);
struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type)
@@ -707,7 +715,6 @@
return NULL;
}
-
EXPORT_SYMBOL(__dev_getfirstbyhwtype);
struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type)
@@ -721,7 +728,6 @@
rtnl_unlock();
return dev;
}
-
EXPORT_SYMBOL(dev_getfirstbyhwtype);
/**
@@ -736,7 +742,8 @@
* dev_put to indicate they have finished with it.
*/
-struct net_device * dev_get_by_flags(struct net *net, unsigned short if_flags, unsigned short mask)
+struct net_device *dev_get_by_flags(struct net *net, unsigned short if_flags,
+ unsigned short mask)
{
struct net_device *dev, *ret;
@@ -752,6 +759,7 @@
read_unlock(&dev_base_lock);
return ret;
}
+EXPORT_SYMBOL(dev_get_by_flags);
/**
* dev_valid_name - check if name is okay for network device
@@ -777,6 +785,7 @@
}
return 1;
}
+EXPORT_SYMBOL(dev_valid_name);
/**
* __dev_alloc_name - allocate a name for a device
@@ -870,6 +879,7 @@
strlcpy(dev->name, buf, IFNAMSIZ);
return ret;
}
+EXPORT_SYMBOL(dev_alloc_name);
/**
@@ -906,8 +916,7 @@
err = dev_alloc_name(dev, newname);
if (err < 0)
return err;
- }
- else if (__dev_get_by_name(net, newname))
+ } else if (__dev_get_by_name(net, newname))
return -EEXIST;
else
strlcpy(dev->name, newname, IFNAMSIZ);
@@ -970,7 +979,7 @@
return 0;
}
- dev->ifalias = krealloc(dev->ifalias, len+1, GFP_KERNEL);
+ dev->ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL);
if (!dev->ifalias)
return -ENOMEM;
@@ -1006,6 +1015,7 @@
rtmsg_ifinfo(RTM_NEWLINK, dev, 0);
}
}
+EXPORT_SYMBOL(netdev_state_change);
void netdev_bonding_change(struct net_device *dev)
{
@@ -1031,9 +1041,10 @@
dev = __dev_get_by_name(net, name);
read_unlock(&dev_base_lock);
- if (!dev && capable(CAP_SYS_MODULE))
+ if (!dev && capable(CAP_NET_ADMIN))
request_module("%s", name);
}
+EXPORT_SYMBOL(dev_load);
/**
* dev_open - prepare an interface for use.
@@ -1118,6 +1129,7 @@
return ret;
}
+EXPORT_SYMBOL(dev_open);
/**
* dev_close - shutdown an interface.
@@ -1184,6 +1196,7 @@
return 0;
}
+EXPORT_SYMBOL(dev_close);
/**
@@ -1279,6 +1292,7 @@
raw_notifier_chain_unregister(&netdev_chain, nb);
goto unlock;
}
+EXPORT_SYMBOL(register_netdevice_notifier);
/**
* unregister_netdevice_notifier - unregister a network notifier block
@@ -1299,6 +1313,7 @@
rtnl_unlock();
return err;
}
+EXPORT_SYMBOL(unregister_netdevice_notifier);
/**
* call_netdevice_notifiers - call all network notifier blocks
@@ -1321,11 +1336,13 @@
{
atomic_inc(&netstamp_needed);
}
+EXPORT_SYMBOL(net_enable_timestamp);
void net_disable_timestamp(void)
{
atomic_dec(&netstamp_needed);
}
+EXPORT_SYMBOL(net_disable_timestamp);
static inline void net_timestamp(struct sk_buff *skb)
{
@@ -1359,7 +1376,7 @@
if ((ptype->dev == dev || !ptype->dev) &&
(ptype->af_packet_priv == NULL ||
(struct sock *)ptype->af_packet_priv != skb->sk)) {
- struct sk_buff *skb2= skb_clone(skb, GFP_ATOMIC);
+ struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2)
break;
@@ -1527,6 +1544,7 @@
out:
return ret;
}
+EXPORT_SYMBOL(skb_checksum_help);
/**
* skb_gso_segment - Perform segmentation on skb.
@@ -1589,7 +1607,6 @@
return segs;
}
-
EXPORT_SYMBOL(skb_gso_segment);
/* Take action when hardware reception checksum errors are detected. */
@@ -1704,7 +1721,7 @@
skb_dst_drop(skb);
rc = ops->ndo_start_xmit(skb, dev);
- if (rc == 0)
+ if (rc == NETDEV_TX_OK)
txq_trans_update(txq);
/*
* TODO: if skb_orphan() was called by
@@ -1730,7 +1747,7 @@
skb->next = nskb->next;
nskb->next = NULL;
rc = ops->ndo_start_xmit(nskb, dev);
- if (unlikely(rc)) {
+ if (unlikely(rc != NETDEV_TX_OK)) {
nskb->next = skb->next;
skb->next = nskb;
return rc;
@@ -1744,7 +1761,7 @@
out_kfree_skb:
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static u32 skb_tx_hashrnd;
@@ -1755,7 +1772,7 @@
if (skb_rx_queue_recorded(skb)) {
hash = skb_get_rx_queue(skb);
- while (unlikely (hash >= dev->real_num_tx_queues))
+ while (unlikely(hash >= dev->real_num_tx_queues))
hash -= dev->real_num_tx_queues;
return hash;
}
@@ -1786,6 +1803,40 @@
return netdev_get_tx_queue(dev, queue_index);
}
+static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
+ struct net_device *dev,
+ struct netdev_queue *txq)
+{
+ spinlock_t *root_lock = qdisc_lock(q);
+ int rc;
+
+ spin_lock(root_lock);
+ if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
+ kfree_skb(skb);
+ rc = NET_XMIT_DROP;
+ } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) &&
+ !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) {
+ /*
+ * This is a work-conserving queue; there are no old skbs
+ * waiting to be sent out; and the qdisc is not running -
+ * xmit the skb directly.
+ */
+ __qdisc_update_bstats(q, skb->len);
+ if (sch_direct_xmit(skb, q, dev, txq, root_lock))
+ __qdisc_run(q);
+ else
+ clear_bit(__QDISC_STATE_RUNNING, &q->state);
+
+ rc = NET_XMIT_SUCCESS;
+ } else {
+ rc = qdisc_enqueue_root(skb, q);
+ qdisc_run(q);
+ }
+ spin_unlock(root_lock);
+
+ return rc;
+}
+
/**
* dev_queue_xmit - transmit a buffer
* @skb: buffer to transmit
@@ -1856,22 +1907,10 @@
q = rcu_dereference(txq->qdisc);
#ifdef CONFIG_NET_CLS_ACT
- skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_EGRESS);
+ skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS);
#endif
if (q->enqueue) {
- spinlock_t *root_lock = qdisc_lock(q);
-
- spin_lock(root_lock);
-
- if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
- kfree_skb(skb);
- rc = NET_XMIT_DROP;
- } else {
- rc = qdisc_enqueue_root(skb, q);
- qdisc_run(q);
- }
- spin_unlock(root_lock);
-
+ rc = __dev_xmit_skb(skb, q, dev, txq);
goto out;
}
@@ -1895,7 +1934,7 @@
HARD_TX_LOCK(dev, txq, cpu);
if (!netif_tx_queue_stopped(txq)) {
- rc = 0;
+ rc = NET_XMIT_SUCCESS;
if (!dev_hard_start_xmit(skb, dev, txq)) {
HARD_TX_UNLOCK(dev, txq);
goto out;
@@ -1924,6 +1963,7 @@
rcu_read_unlock_bh();
return rc;
}
+EXPORT_SYMBOL(dev_queue_xmit);
/*=======================================================================
@@ -1990,6 +2030,7 @@
kfree_skb(skb);
return NET_RX_DROP;
}
+EXPORT_SYMBOL(netif_rx);
int netif_rx_ni(struct sk_buff *skb)
{
@@ -2003,7 +2044,6 @@
return err;
}
-
EXPORT_SYMBOL(netif_rx_ni);
static void net_tx_action(struct softirq_action *h)
@@ -2076,7 +2116,7 @@
/* This hook is defined here for ATM LANE */
int (*br_fdb_test_addr_hook)(struct net_device *dev,
unsigned char *addr) __read_mostly;
-EXPORT_SYMBOL(br_fdb_test_addr_hook);
+EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook);
#endif
/*
@@ -2085,7 +2125,7 @@
*/
struct sk_buff *(*br_handle_frame_hook)(struct net_bridge_port *p,
struct sk_buff *skb) __read_mostly;
-EXPORT_SYMBOL(br_handle_frame_hook);
+EXPORT_SYMBOL_GPL(br_handle_frame_hook);
static inline struct sk_buff *handle_bridge(struct sk_buff *skb,
struct packet_type **pt_prev, int *ret,
@@ -2336,6 +2376,7 @@
rcu_read_unlock();
return ret;
}
+EXPORT_SYMBOL(netif_receive_skb);
/* Network device is going away, flush any packets still pending */
static void flush_backlog(void *arg)
@@ -2852,7 +2893,7 @@
goto out;
}
-static gifconf_func_t * gifconf_list [NPROTO];
+static gifconf_func_t *gifconf_list[NPROTO];
/**
* register_gifconf - register a SIOCGIF handler
@@ -2863,13 +2904,14 @@
* that is passed must not be freed or reused until it has been replaced
* by another handler.
*/
-int register_gifconf(unsigned int family, gifconf_func_t * gifconf)
+int register_gifconf(unsigned int family, gifconf_func_t *gifconf)
{
if (family >= NPROTO)
return -EINVAL;
gifconf_list[family] = gifconf;
return 0;
}
+EXPORT_SYMBOL(register_gifconf);
/*
@@ -3080,7 +3122,7 @@
seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x\n",
s->total, s->dropped, s->time_squeeze, 0,
0, 0, 0, 0, /* was fastroute */
- s->cpu_collision );
+ s->cpu_collision);
return 0;
}
@@ -3316,6 +3358,7 @@
rtmsg_ifinfo(RTM_NEWLINK, slave, IFF_SLAVE);
return 0;
}
+EXPORT_SYMBOL(netdev_set_master);
static void dev_change_rx_flags(struct net_device *dev, int flags)
{
@@ -3394,6 +3437,7 @@
dev_set_rx_mode(dev);
return err;
}
+EXPORT_SYMBOL(dev_set_promiscuity);
/**
* dev_set_allmulti - update allmulti count on a device
@@ -3437,6 +3481,7 @@
}
return 0;
}
+EXPORT_SYMBOL(dev_set_allmulti);
/*
* Upload unicast and multicast address lists to device and
@@ -3927,6 +3972,7 @@
}
return err;
}
+EXPORT_SYMBOL_GPL(__dev_addr_sync);
void __dev_addr_unsync(struct dev_addr_list **to, int *to_count,
struct dev_addr_list **from, int *from_count)
@@ -3946,6 +3992,7 @@
da = next;
}
}
+EXPORT_SYMBOL_GPL(__dev_addr_unsync);
/**
* dev_unicast_sync - Synchronize device's unicast list to another device
@@ -4064,6 +4111,7 @@
return flags;
}
+EXPORT_SYMBOL(dev_get_flags);
/**
* dev_change_flags - change device settings
@@ -4114,12 +4162,13 @@
}
if (dev->flags & IFF_UP &&
- ((old_flags ^ dev->flags) &~ (IFF_UP | IFF_PROMISC | IFF_ALLMULTI |
+ ((old_flags ^ dev->flags) & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI |
IFF_VOLATILE)))
call_netdevice_notifiers(NETDEV_CHANGE, dev);
if ((flags ^ dev->gflags) & IFF_PROMISC) {
- int inc = (flags & IFF_PROMISC) ? +1 : -1;
+ int inc = (flags & IFF_PROMISC) ? 1 : -1;
+
dev->gflags ^= IFF_PROMISC;
dev_set_promiscuity(dev, inc);
}
@@ -4129,7 +4178,8 @@
IFF_ALLMULTI is requested not asking us and not reporting.
*/
if ((flags ^ dev->gflags) & IFF_ALLMULTI) {
- int inc = (flags & IFF_ALLMULTI) ? +1 : -1;
+ int inc = (flags & IFF_ALLMULTI) ? 1 : -1;
+
dev->gflags ^= IFF_ALLMULTI;
dev_set_allmulti(dev, inc);
}
@@ -4141,6 +4191,7 @@
return ret;
}
+EXPORT_SYMBOL(dev_change_flags);
/**
* dev_set_mtu - Change maximum transfer unit
@@ -4174,6 +4225,7 @@
call_netdevice_notifiers(NETDEV_CHANGEMTU, dev);
return err;
}
+EXPORT_SYMBOL(dev_set_mtu);
/**
* dev_set_mac_address - Change Media Access Control Address
@@ -4198,6 +4250,7 @@
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
return err;
}
+EXPORT_SYMBOL(dev_set_mac_address);
/*
* Perform the SIOCxIFxxx calls, inside read_lock(dev_base_lock)
@@ -4211,56 +4264,56 @@
return -ENODEV;
switch (cmd) {
- case SIOCGIFFLAGS: /* Get interface flags */
- ifr->ifr_flags = (short) dev_get_flags(dev);
- return 0;
+ case SIOCGIFFLAGS: /* Get interface flags */
+ ifr->ifr_flags = (short) dev_get_flags(dev);
+ return 0;
- case SIOCGIFMETRIC: /* Get the metric on the interface
- (currently unused) */
- ifr->ifr_metric = 0;
- return 0;
+ case SIOCGIFMETRIC: /* Get the metric on the interface
+ (currently unused) */
+ ifr->ifr_metric = 0;
+ return 0;
- case SIOCGIFMTU: /* Get the MTU of a device */
- ifr->ifr_mtu = dev->mtu;
- return 0;
+ case SIOCGIFMTU: /* Get the MTU of a device */
+ ifr->ifr_mtu = dev->mtu;
+ return 0;
- case SIOCGIFHWADDR:
- if (!dev->addr_len)
- memset(ifr->ifr_hwaddr.sa_data, 0, sizeof ifr->ifr_hwaddr.sa_data);
- else
- memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr,
- min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len));
- ifr->ifr_hwaddr.sa_family = dev->type;
- return 0;
+ case SIOCGIFHWADDR:
+ if (!dev->addr_len)
+ memset(ifr->ifr_hwaddr.sa_data, 0, sizeof ifr->ifr_hwaddr.sa_data);
+ else
+ memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr,
+ min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len));
+ ifr->ifr_hwaddr.sa_family = dev->type;
+ return 0;
- case SIOCGIFSLAVE:
- err = -EINVAL;
- break;
+ case SIOCGIFSLAVE:
+ err = -EINVAL;
+ break;
- case SIOCGIFMAP:
- ifr->ifr_map.mem_start = dev->mem_start;
- ifr->ifr_map.mem_end = dev->mem_end;
- ifr->ifr_map.base_addr = dev->base_addr;
- ifr->ifr_map.irq = dev->irq;
- ifr->ifr_map.dma = dev->dma;
- ifr->ifr_map.port = dev->if_port;
- return 0;
+ case SIOCGIFMAP:
+ ifr->ifr_map.mem_start = dev->mem_start;
+ ifr->ifr_map.mem_end = dev->mem_end;
+ ifr->ifr_map.base_addr = dev->base_addr;
+ ifr->ifr_map.irq = dev->irq;
+ ifr->ifr_map.dma = dev->dma;
+ ifr->ifr_map.port = dev->if_port;
+ return 0;
- case SIOCGIFINDEX:
- ifr->ifr_ifindex = dev->ifindex;
- return 0;
+ case SIOCGIFINDEX:
+ ifr->ifr_ifindex = dev->ifindex;
+ return 0;
- case SIOCGIFTXQLEN:
- ifr->ifr_qlen = dev->tx_queue_len;
- return 0;
+ case SIOCGIFTXQLEN:
+ ifr->ifr_qlen = dev->tx_queue_len;
+ return 0;
- default:
- /* dev_ioctl() should ensure this case
- * is never reached
- */
- WARN_ON(1);
- err = -EINVAL;
- break;
+ default:
+ /* dev_ioctl() should ensure this case
+ * is never reached
+ */
+ WARN_ON(1);
+ err = -EINVAL;
+ break;
}
return err;
@@ -4281,92 +4334,91 @@
ops = dev->netdev_ops;
switch (cmd) {
- case SIOCSIFFLAGS: /* Set interface flags */
- return dev_change_flags(dev, ifr->ifr_flags);
+ case SIOCSIFFLAGS: /* Set interface flags */
+ return dev_change_flags(dev, ifr->ifr_flags);
- case SIOCSIFMETRIC: /* Set the metric on the interface
- (currently unused) */
- return -EOPNOTSUPP;
+ case SIOCSIFMETRIC: /* Set the metric on the interface
+ (currently unused) */
+ return -EOPNOTSUPP;
- case SIOCSIFMTU: /* Set the MTU of a device */
- return dev_set_mtu(dev, ifr->ifr_mtu);
+ case SIOCSIFMTU: /* Set the MTU of a device */
+ return dev_set_mtu(dev, ifr->ifr_mtu);
- case SIOCSIFHWADDR:
- return dev_set_mac_address(dev, &ifr->ifr_hwaddr);
+ case SIOCSIFHWADDR:
+ return dev_set_mac_address(dev, &ifr->ifr_hwaddr);
- case SIOCSIFHWBROADCAST:
- if (ifr->ifr_hwaddr.sa_family != dev->type)
- return -EINVAL;
- memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data,
- min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len));
- call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- return 0;
+ case SIOCSIFHWBROADCAST:
+ if (ifr->ifr_hwaddr.sa_family != dev->type)
+ return -EINVAL;
+ memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data,
+ min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len));
+ call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ return 0;
- case SIOCSIFMAP:
- if (ops->ndo_set_config) {
- if (!netif_device_present(dev))
- return -ENODEV;
- return ops->ndo_set_config(dev, &ifr->ifr_map);
+ case SIOCSIFMAP:
+ if (ops->ndo_set_config) {
+ if (!netif_device_present(dev))
+ return -ENODEV;
+ return ops->ndo_set_config(dev, &ifr->ifr_map);
+ }
+ return -EOPNOTSUPP;
+
+ case SIOCADDMULTI:
+ if ((!ops->ndo_set_multicast_list && !ops->ndo_set_rx_mode) ||
+ ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
+ return -EINVAL;
+ if (!netif_device_present(dev))
+ return -ENODEV;
+ return dev_mc_add(dev, ifr->ifr_hwaddr.sa_data,
+ dev->addr_len, 1);
+
+ case SIOCDELMULTI:
+ if ((!ops->ndo_set_multicast_list && !ops->ndo_set_rx_mode) ||
+ ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
+ return -EINVAL;
+ if (!netif_device_present(dev))
+ return -ENODEV;
+ return dev_mc_delete(dev, ifr->ifr_hwaddr.sa_data,
+ dev->addr_len, 1);
+
+ case SIOCSIFTXQLEN:
+ if (ifr->ifr_qlen < 0)
+ return -EINVAL;
+ dev->tx_queue_len = ifr->ifr_qlen;
+ return 0;
+
+ case SIOCSIFNAME:
+ ifr->ifr_newname[IFNAMSIZ-1] = '\0';
+ return dev_change_name(dev, ifr->ifr_newname);
+
+ /*
+ * Unknown or private ioctl
+ */
+ default:
+ if ((cmd >= SIOCDEVPRIVATE &&
+ cmd <= SIOCDEVPRIVATE + 15) ||
+ cmd == SIOCBONDENSLAVE ||
+ cmd == SIOCBONDRELEASE ||
+ cmd == SIOCBONDSETHWADDR ||
+ cmd == SIOCBONDSLAVEINFOQUERY ||
+ cmd == SIOCBONDINFOQUERY ||
+ cmd == SIOCBONDCHANGEACTIVE ||
+ cmd == SIOCGMIIPHY ||
+ cmd == SIOCGMIIREG ||
+ cmd == SIOCSMIIREG ||
+ cmd == SIOCBRADDIF ||
+ cmd == SIOCBRDELIF ||
+ cmd == SIOCSHWTSTAMP ||
+ cmd == SIOCWANDEV) {
+ err = -EOPNOTSUPP;
+ if (ops->ndo_do_ioctl) {
+ if (netif_device_present(dev))
+ err = ops->ndo_do_ioctl(dev, ifr, cmd);
+ else
+ err = -ENODEV;
}
- return -EOPNOTSUPP;
-
- case SIOCADDMULTI:
- if ((!ops->ndo_set_multicast_list && !ops->ndo_set_rx_mode) ||
- ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
- return -EINVAL;
- if (!netif_device_present(dev))
- return -ENODEV;
- return dev_mc_add(dev, ifr->ifr_hwaddr.sa_data,
- dev->addr_len, 1);
-
- case SIOCDELMULTI:
- if ((!ops->ndo_set_multicast_list && !ops->ndo_set_rx_mode) ||
- ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
- return -EINVAL;
- if (!netif_device_present(dev))
- return -ENODEV;
- return dev_mc_delete(dev, ifr->ifr_hwaddr.sa_data,
- dev->addr_len, 1);
-
- case SIOCSIFTXQLEN:
- if (ifr->ifr_qlen < 0)
- return -EINVAL;
- dev->tx_queue_len = ifr->ifr_qlen;
- return 0;
-
- case SIOCSIFNAME:
- ifr->ifr_newname[IFNAMSIZ-1] = '\0';
- return dev_change_name(dev, ifr->ifr_newname);
-
- /*
- * Unknown or private ioctl
- */
-
- default:
- if ((cmd >= SIOCDEVPRIVATE &&
- cmd <= SIOCDEVPRIVATE + 15) ||
- cmd == SIOCBONDENSLAVE ||
- cmd == SIOCBONDRELEASE ||
- cmd == SIOCBONDSETHWADDR ||
- cmd == SIOCBONDSLAVEINFOQUERY ||
- cmd == SIOCBONDINFOQUERY ||
- cmd == SIOCBONDCHANGEACTIVE ||
- cmd == SIOCGMIIPHY ||
- cmd == SIOCGMIIREG ||
- cmd == SIOCSMIIREG ||
- cmd == SIOCBRADDIF ||
- cmd == SIOCBRDELIF ||
- cmd == SIOCSHWTSTAMP ||
- cmd == SIOCWANDEV) {
- err = -EOPNOTSUPP;
- if (ops->ndo_do_ioctl) {
- if (netif_device_present(dev))
- err = ops->ndo_do_ioctl(dev, ifr, cmd);
- else
- err = -ENODEV;
- }
- } else
- err = -EINVAL;
+ } else
+ err = -EINVAL;
}
return err;
@@ -4423,135 +4475,135 @@
*/
switch (cmd) {
- /*
- * These ioctl calls:
- * - can be done by all.
- * - atomic and do not require locking.
- * - return a value
- */
- case SIOCGIFFLAGS:
- case SIOCGIFMETRIC:
- case SIOCGIFMTU:
- case SIOCGIFHWADDR:
- case SIOCGIFSLAVE:
- case SIOCGIFMAP:
- case SIOCGIFINDEX:
- case SIOCGIFTXQLEN:
- dev_load(net, ifr.ifr_name);
- read_lock(&dev_base_lock);
- ret = dev_ifsioc_locked(net, &ifr, cmd);
- read_unlock(&dev_base_lock);
- if (!ret) {
- if (colon)
- *colon = ':';
- if (copy_to_user(arg, &ifr,
- sizeof(struct ifreq)))
- ret = -EFAULT;
- }
- return ret;
+ /*
+ * These ioctl calls:
+ * - can be done by all.
+ * - atomic and do not require locking.
+ * - return a value
+ */
+ case SIOCGIFFLAGS:
+ case SIOCGIFMETRIC:
+ case SIOCGIFMTU:
+ case SIOCGIFHWADDR:
+ case SIOCGIFSLAVE:
+ case SIOCGIFMAP:
+ case SIOCGIFINDEX:
+ case SIOCGIFTXQLEN:
+ dev_load(net, ifr.ifr_name);
+ read_lock(&dev_base_lock);
+ ret = dev_ifsioc_locked(net, &ifr, cmd);
+ read_unlock(&dev_base_lock);
+ if (!ret) {
+ if (colon)
+ *colon = ':';
+ if (copy_to_user(arg, &ifr,
+ sizeof(struct ifreq)))
+ ret = -EFAULT;
+ }
+ return ret;
- case SIOCETHTOOL:
- dev_load(net, ifr.ifr_name);
- rtnl_lock();
- ret = dev_ethtool(net, &ifr);
- rtnl_unlock();
- if (!ret) {
- if (colon)
- *colon = ':';
- if (copy_to_user(arg, &ifr,
- sizeof(struct ifreq)))
- ret = -EFAULT;
- }
- return ret;
+ case SIOCETHTOOL:
+ dev_load(net, ifr.ifr_name);
+ rtnl_lock();
+ ret = dev_ethtool(net, &ifr);
+ rtnl_unlock();
+ if (!ret) {
+ if (colon)
+ *colon = ':';
+ if (copy_to_user(arg, &ifr,
+ sizeof(struct ifreq)))
+ ret = -EFAULT;
+ }
+ return ret;
- /*
- * These ioctl calls:
- * - require superuser power.
- * - require strict serialization.
- * - return a value
- */
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSIFNAME:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ /*
+ * These ioctl calls:
+ * - require superuser power.
+ * - require strict serialization.
+ * - return a value
+ */
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSIFNAME:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ dev_load(net, ifr.ifr_name);
+ rtnl_lock();
+ ret = dev_ifsioc(net, &ifr, cmd);
+ rtnl_unlock();
+ if (!ret) {
+ if (colon)
+ *colon = ':';
+ if (copy_to_user(arg, &ifr,
+ sizeof(struct ifreq)))
+ ret = -EFAULT;
+ }
+ return ret;
+
+ /*
+ * These ioctl calls:
+ * - require superuser power.
+ * - require strict serialization.
+ * - do not return a value
+ */
+ case SIOCSIFFLAGS:
+ case SIOCSIFMETRIC:
+ case SIOCSIFMTU:
+ case SIOCSIFMAP:
+ case SIOCSIFHWADDR:
+ case SIOCSIFSLAVE:
+ case SIOCADDMULTI:
+ case SIOCDELMULTI:
+ case SIOCSIFHWBROADCAST:
+ case SIOCSIFTXQLEN:
+ case SIOCSMIIREG:
+ case SIOCBONDENSLAVE:
+ case SIOCBONDRELEASE:
+ case SIOCBONDSETHWADDR:
+ case SIOCBONDCHANGEACTIVE:
+ case SIOCBRADDIF:
+ case SIOCBRDELIF:
+ case SIOCSHWTSTAMP:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* fall through */
+ case SIOCBONDSLAVEINFOQUERY:
+ case SIOCBONDINFOQUERY:
+ dev_load(net, ifr.ifr_name);
+ rtnl_lock();
+ ret = dev_ifsioc(net, &ifr, cmd);
+ rtnl_unlock();
+ return ret;
+
+ case SIOCGIFMEM:
+ /* Get the per device memory space. We can add this but
+ * currently do not support it */
+ case SIOCSIFMEM:
+ /* Set the per device memory buffer space.
+ * Not applicable in our case */
+ case SIOCSIFLINK:
+ return -EINVAL;
+
+ /*
+ * Unknown or private ioctl.
+ */
+ default:
+ if (cmd == SIOCWANDEV ||
+ (cmd >= SIOCDEVPRIVATE &&
+ cmd <= SIOCDEVPRIVATE + 15)) {
dev_load(net, ifr.ifr_name);
rtnl_lock();
ret = dev_ifsioc(net, &ifr, cmd);
rtnl_unlock();
- if (!ret) {
- if (colon)
- *colon = ':';
- if (copy_to_user(arg, &ifr,
+ if (!ret && copy_to_user(arg, &ifr,
sizeof(struct ifreq)))
- ret = -EFAULT;
- }
+ ret = -EFAULT;
return ret;
-
- /*
- * These ioctl calls:
- * - require superuser power.
- * - require strict serialization.
- * - do not return a value
- */
- case SIOCSIFFLAGS:
- case SIOCSIFMETRIC:
- case SIOCSIFMTU:
- case SIOCSIFMAP:
- case SIOCSIFHWADDR:
- case SIOCSIFSLAVE:
- case SIOCADDMULTI:
- case SIOCDELMULTI:
- case SIOCSIFHWBROADCAST:
- case SIOCSIFTXQLEN:
- case SIOCSMIIREG:
- case SIOCBONDENSLAVE:
- case SIOCBONDRELEASE:
- case SIOCBONDSETHWADDR:
- case SIOCBONDCHANGEACTIVE:
- case SIOCBRADDIF:
- case SIOCBRDELIF:
- case SIOCSHWTSTAMP:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- /* fall through */
- case SIOCBONDSLAVEINFOQUERY:
- case SIOCBONDINFOQUERY:
- dev_load(net, ifr.ifr_name);
- rtnl_lock();
- ret = dev_ifsioc(net, &ifr, cmd);
- rtnl_unlock();
- return ret;
-
- case SIOCGIFMEM:
- /* Get the per device memory space. We can add this but
- * currently do not support it */
- case SIOCSIFMEM:
- /* Set the per device memory buffer space.
- * Not applicable in our case */
- case SIOCSIFLINK:
- return -EINVAL;
-
- /*
- * Unknown or private ioctl.
- */
- default:
- if (cmd == SIOCWANDEV ||
- (cmd >= SIOCDEVPRIVATE &&
- cmd <= SIOCDEVPRIVATE + 15)) {
- dev_load(net, ifr.ifr_name);
- rtnl_lock();
- ret = dev_ifsioc(net, &ifr, cmd);
- rtnl_unlock();
- if (!ret && copy_to_user(arg, &ifr,
- sizeof(struct ifreq)))
- ret = -EFAULT;
- return ret;
- }
- /* Take care of Wireless Extensions */
- if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
- return wext_handle_ioctl(net, &ifr, cmd, arg);
- return -EINVAL;
+ }
+ /* Take care of Wireless Extensions */
+ if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
+ return wext_handle_ioctl(net, &ifr, cmd, arg);
+ return -EINVAL;
}
}
@@ -4816,6 +4868,7 @@
dev->netdev_ops->ndo_uninit(dev);
goto out;
}
+EXPORT_SYMBOL(register_netdevice);
/**
* init_dummy_netdev - init a dummy network device for NAPI
@@ -5168,6 +5221,7 @@
/* will free via device release */
put_device(&dev->dev);
}
+EXPORT_SYMBOL(free_netdev);
/**
* synchronize_net - Synchronize with packet receive processing
@@ -5180,6 +5234,7 @@
might_sleep();
synchronize_rcu();
}
+EXPORT_SYMBOL(synchronize_net);
/**
* unregister_netdevice - remove device from the kernel
@@ -5200,6 +5255,7 @@
/* Finish processing unregister after unlock */
net_set_todo(dev);
}
+EXPORT_SYMBOL(unregister_netdevice);
/**
* unregister_netdev - remove device from the kernel
@@ -5218,7 +5274,6 @@
unregister_netdevice(dev);
rtnl_unlock();
}
-
EXPORT_SYMBOL(unregister_netdev);
/**
@@ -5347,6 +5402,7 @@
out:
return err;
}
+EXPORT_SYMBOL_GPL(dev_change_net_namespace);
static int dev_cpu_callback(struct notifier_block *nfb,
unsigned long action,
@@ -5407,7 +5463,7 @@
unsigned long mask)
{
/* If device needs checksumming, downgrade to it. */
- if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
+ if (all & NETIF_F_NO_CSUM && !(one & NETIF_F_NO_CSUM))
all ^= NETIF_F_NO_CSUM | (one & NETIF_F_ALL_CSUM);
else if (mask & NETIF_F_ALL_CSUM) {
/* If one device supports v4/v6 checksumming, set for all. */
@@ -5633,41 +5689,3 @@
late_initcall_sync(initialize_hashrnd);
-EXPORT_SYMBOL(__dev_get_by_index);
-EXPORT_SYMBOL(__dev_get_by_name);
-EXPORT_SYMBOL(__dev_remove_pack);
-EXPORT_SYMBOL(dev_valid_name);
-EXPORT_SYMBOL(dev_add_pack);
-EXPORT_SYMBOL(dev_alloc_name);
-EXPORT_SYMBOL(dev_close);
-EXPORT_SYMBOL(dev_get_by_flags);
-EXPORT_SYMBOL(dev_get_by_index);
-EXPORT_SYMBOL(dev_get_by_name);
-EXPORT_SYMBOL(dev_open);
-EXPORT_SYMBOL(dev_queue_xmit);
-EXPORT_SYMBOL(dev_remove_pack);
-EXPORT_SYMBOL(dev_set_allmulti);
-EXPORT_SYMBOL(dev_set_promiscuity);
-EXPORT_SYMBOL(dev_change_flags);
-EXPORT_SYMBOL(dev_set_mtu);
-EXPORT_SYMBOL(dev_set_mac_address);
-EXPORT_SYMBOL(free_netdev);
-EXPORT_SYMBOL(netdev_boot_setup_check);
-EXPORT_SYMBOL(netdev_set_master);
-EXPORT_SYMBOL(netdev_state_change);
-EXPORT_SYMBOL(netif_receive_skb);
-EXPORT_SYMBOL(netif_rx);
-EXPORT_SYMBOL(register_gifconf);
-EXPORT_SYMBOL(register_netdevice);
-EXPORT_SYMBOL(register_netdevice_notifier);
-EXPORT_SYMBOL(skb_checksum_help);
-EXPORT_SYMBOL(synchronize_net);
-EXPORT_SYMBOL(unregister_netdevice);
-EXPORT_SYMBOL(unregister_netdevice_notifier);
-EXPORT_SYMBOL(net_enable_timestamp);
-EXPORT_SYMBOL(net_disable_timestamp);
-EXPORT_SYMBOL(dev_get_flags);
-
-EXPORT_SYMBOL(dev_load);
-
-EXPORT_PER_CPU_SYMBOL(softnet_data);
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 9d66fa9..0a113f2 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -52,6 +52,7 @@
struct dm_hw_stat_delta {
struct net_device *dev;
+ unsigned long last_rx;
struct list_head list;
struct rcu_head rcu;
unsigned long last_drop_val;
@@ -180,17 +181,25 @@
struct dm_hw_stat_delta *new_stat;
/*
- * Ratelimit our check time to dm_hw_check_delta jiffies
+ * Don't check napi structures with no associated device
*/
- if (!time_after(jiffies, napi->dev->last_rx + dm_hw_check_delta))
+ if (!napi->dev)
return;
rcu_read_lock();
list_for_each_entry_rcu(new_stat, &hw_stats_list, list) {
+ /*
+ * only add a note to our monitor buffer if:
+ * 1) this is the dev we received on
+ * 2) its after the last_rx delta
+ * 3) our rx_dropped count has gone up
+ */
if ((new_stat->dev == napi->dev) &&
+ (time_after(jiffies, new_stat->last_rx + dm_hw_check_delta)) &&
(napi->dev->stats.rx_dropped != new_stat->last_drop_val)) {
trace_drop_common(NULL, NULL);
new_stat->last_drop_val = napi->dev->stats.rx_dropped;
+ new_stat->last_rx = jiffies;
break;
}
}
@@ -286,6 +295,7 @@
goto out;
new_stat->dev = dev;
+ new_stat->last_rx = jiffies;
INIT_RCU_HEAD(&new_stat->rcu);
spin_lock(&trace_state_lock);
list_add_rcu(&new_stat->list, &hw_stats_list);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index d9d5160..4c12ddb 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -30,10 +30,17 @@
return netif_carrier_ok(dev) ? 1 : 0;
}
+u32 ethtool_op_get_rx_csum(struct net_device *dev)
+{
+ return (dev->features & NETIF_F_ALL_CSUM) != 0;
+}
+EXPORT_SYMBOL(ethtool_op_get_rx_csum);
+
u32 ethtool_op_get_tx_csum(struct net_device *dev)
{
return (dev->features & NETIF_F_ALL_CSUM) != 0;
}
+EXPORT_SYMBOL(ethtool_op_get_tx_csum);
int ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
{
@@ -891,6 +898,19 @@
return actor(dev, edata.data);
}
+static int ethtool_flash_device(struct net_device *dev, char __user *useraddr)
+{
+ struct ethtool_flash efl;
+
+ if (copy_from_user(&efl, useraddr, sizeof(efl)))
+ return -EFAULT;
+
+ if (!dev->ethtool_ops->flash_device)
+ return -EOPNOTSUPP;
+
+ return dev->ethtool_ops->flash_device(dev, &efl);
+}
+
/* The main entry point in this file. Called from net/core/dev.c */
int dev_ethtool(struct net *net, struct ifreq *ifr)
@@ -1004,7 +1024,9 @@
break;
case ETHTOOL_GRXCSUM:
rc = ethtool_get_value(dev, useraddr, ethcmd,
- dev->ethtool_ops->get_rx_csum);
+ (dev->ethtool_ops->get_rx_csum ?
+ dev->ethtool_ops->get_rx_csum :
+ ethtool_op_get_rx_csum));
break;
case ETHTOOL_SRXCSUM:
rc = ethtool_set_rx_csum(dev, useraddr);
@@ -1068,7 +1090,9 @@
break;
case ETHTOOL_GFLAGS:
rc = ethtool_get_value(dev, useraddr, ethcmd,
- dev->ethtool_ops->get_flags);
+ (dev->ethtool_ops->get_flags ?
+ dev->ethtool_ops->get_flags :
+ ethtool_op_get_flags));
break;
case ETHTOOL_SFLAGS:
rc = ethtool_set_value(dev, useraddr,
@@ -1100,6 +1124,9 @@
case ETHTOOL_SGRO:
rc = ethtool_set_gro(dev, useraddr);
break;
+ case ETHTOOL_FLASHDEV:
+ rc = ethtool_flash_device(dev, useraddr);
+ break;
default:
rc = -EOPNOTSUPP;
}
@@ -1116,7 +1143,6 @@
EXPORT_SYMBOL(ethtool_op_get_link);
EXPORT_SYMBOL(ethtool_op_get_sg);
EXPORT_SYMBOL(ethtool_op_get_tso);
-EXPORT_SYMBOL(ethtool_op_get_tx_csum);
EXPORT_SYMBOL(ethtool_op_set_sg);
EXPORT_SYMBOL(ethtool_op_set_tso);
EXPORT_SYMBOL(ethtool_op_set_tx_csum);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 163b4f5..e587e68 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -692,75 +692,74 @@
hh->hh_output = neigh->ops->hh_output;
}
-static void neigh_periodic_timer(unsigned long arg)
+static void neigh_periodic_work(struct work_struct *work)
{
- struct neigh_table *tbl = (struct neigh_table *)arg;
+ struct neigh_table *tbl = container_of(work, struct neigh_table, gc_work.work);
struct neighbour *n, **np;
- unsigned long expire, now = jiffies;
+ unsigned int i;
NEIGH_CACHE_STAT_INC(tbl, periodic_gc_runs);
- write_lock(&tbl->lock);
+ write_lock_bh(&tbl->lock);
/*
* periodically recompute ReachableTime from random function
*/
- if (time_after(now, tbl->last_rand + 300 * HZ)) {
+ if (time_after(jiffies, tbl->last_rand + 300 * HZ)) {
struct neigh_parms *p;
- tbl->last_rand = now;
+ tbl->last_rand = jiffies;
for (p = &tbl->parms; p; p = p->next)
p->reachable_time =
neigh_rand_reach_time(p->base_reachable_time);
}
- np = &tbl->hash_buckets[tbl->hash_chain_gc];
- tbl->hash_chain_gc = ((tbl->hash_chain_gc + 1) & tbl->hash_mask);
+ for (i = 0 ; i <= tbl->hash_mask; i++) {
+ np = &tbl->hash_buckets[i];
- while ((n = *np) != NULL) {
- unsigned int state;
+ while ((n = *np) != NULL) {
+ unsigned int state;
- write_lock(&n->lock);
+ write_lock(&n->lock);
- state = n->nud_state;
- if (state & (NUD_PERMANENT | NUD_IN_TIMER)) {
+ state = n->nud_state;
+ if (state & (NUD_PERMANENT | NUD_IN_TIMER)) {
+ write_unlock(&n->lock);
+ goto next_elt;
+ }
+
+ if (time_before(n->used, n->confirmed))
+ n->used = n->confirmed;
+
+ if (atomic_read(&n->refcnt) == 1 &&
+ (state == NUD_FAILED ||
+ time_after(jiffies, n->used + n->parms->gc_staletime))) {
+ *np = n->next;
+ n->dead = 1;
+ write_unlock(&n->lock);
+ neigh_cleanup_and_release(n);
+ continue;
+ }
write_unlock(&n->lock);
- goto next_elt;
- }
-
- if (time_before(n->used, n->confirmed))
- n->used = n->confirmed;
-
- if (atomic_read(&n->refcnt) == 1 &&
- (state == NUD_FAILED ||
- time_after(now, n->used + n->parms->gc_staletime))) {
- *np = n->next;
- n->dead = 1;
- write_unlock(&n->lock);
- neigh_cleanup_and_release(n);
- continue;
- }
- write_unlock(&n->lock);
next_elt:
- np = &n->next;
+ np = &n->next;
+ }
+ /*
+ * It's fine to release lock here, even if hash table
+ * grows while we are preempted.
+ */
+ write_unlock_bh(&tbl->lock);
+ cond_resched();
+ write_lock_bh(&tbl->lock);
}
-
/* Cycle through all hash buckets every base_reachable_time/2 ticks.
* ARP entry timeouts range from 1/2 base_reachable_time to 3/2
* base_reachable_time.
*/
- expire = tbl->parms.base_reachable_time >> 1;
- expire /= (tbl->hash_mask + 1);
- if (!expire)
- expire = 1;
-
- if (expire>HZ)
- mod_timer(&tbl->gc_timer, round_jiffies(now + expire));
- else
- mod_timer(&tbl->gc_timer, now + expire);
-
- write_unlock(&tbl->lock);
+ schedule_delayed_work(&tbl->gc_work,
+ tbl->parms.base_reachable_time >> 1);
+ write_unlock_bh(&tbl->lock);
}
static __inline__ int neigh_max_probes(struct neighbour *n)
@@ -1316,7 +1315,7 @@
}
EXPORT_SYMBOL(pneigh_enqueue);
-static inline struct neigh_parms *lookup_neigh_params(struct neigh_table *tbl,
+static inline struct neigh_parms *lookup_neigh_parms(struct neigh_table *tbl,
struct net *net, int ifindex)
{
struct neigh_parms *p;
@@ -1337,7 +1336,7 @@
struct net *net = dev_net(dev);
const struct net_device_ops *ops = dev->netdev_ops;
- ref = lookup_neigh_params(tbl, net, 0);
+ ref = lookup_neigh_parms(tbl, net, 0);
if (!ref)
return NULL;
@@ -1442,10 +1441,8 @@
get_random_bytes(&tbl->hash_rnd, sizeof(tbl->hash_rnd));
rwlock_init(&tbl->lock);
- setup_timer(&tbl->gc_timer, neigh_periodic_timer, (unsigned long)tbl);
- tbl->gc_timer.expires = now + 1;
- add_timer(&tbl->gc_timer);
-
+ INIT_DELAYED_WORK_DEFERRABLE(&tbl->gc_work, neigh_periodic_work);
+ schedule_delayed_work(&tbl->gc_work, tbl->parms.reachable_time);
setup_timer(&tbl->proxy_timer, neigh_proxy_process, (unsigned long)tbl);
skb_queue_head_init_class(&tbl->proxy_queue,
&neigh_table_proxy_queue_class);
@@ -1482,7 +1479,8 @@
struct neigh_table **tp;
/* It is not clean... Fix it to unload IPv6 module safely */
- del_timer_sync(&tbl->gc_timer);
+ cancel_delayed_work(&tbl->gc_work);
+ flush_scheduled_work();
del_timer_sync(&tbl->proxy_timer);
pneigh_queue_purge(&tbl->proxy_queue);
neigh_ifdown(tbl, NULL);
@@ -1752,7 +1750,6 @@
.ndtc_last_rand = jiffies_to_msecs(rand_delta),
.ndtc_hash_rnd = tbl->hash_rnd,
.ndtc_hash_mask = tbl->hash_mask,
- .ndtc_hash_chain_gc = tbl->hash_chain_gc,
.ndtc_proxy_qlen = tbl->proxy_queue.qlen,
};
@@ -1906,7 +1903,7 @@
if (tbp[NDTPA_IFINDEX])
ifindex = nla_get_u32(tbp[NDTPA_IFINDEX]);
- p = lookup_neigh_params(tbl, net, ifindex);
+ p = lookup_neigh_parms(tbl, net, ifindex);
if (p == NULL) {
err = -ENOENT;
goto errout_tbl_lock;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 3994680..ad91e9e 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -141,7 +141,7 @@
return -EINVAL;
}
-static const char *operstates[] = {
+static const char *const operstates[] = {
"unknown",
"notpresent", /* currently unused */
"down",
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 1972830..1c1af27 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -6,6 +6,8 @@
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/idr.h>
+#include <linux/rculist.h>
+#include <linux/nsproxy.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
@@ -127,7 +129,7 @@
rv = setup_net(net);
if (rv == 0) {
rtnl_lock();
- list_add_tail(&net->list, &net_namespace_list);
+ list_add_tail_rcu(&net->list, &net_namespace_list);
rtnl_unlock();
}
mutex_unlock(&net_mutex);
@@ -156,9 +158,16 @@
/* Don't let anyone else find us. */
rtnl_lock();
- list_del(&net->list);
+ list_del_rcu(&net->list);
rtnl_unlock();
+ /*
+ * Another CPU might be rcu-iterating the list, wait for it.
+ * This needs to be before calling the exit() notifiers, so
+ * the rcu_barrier() below isn't sufficient alone.
+ */
+ synchronize_rcu();
+
/* Run all of the network namespace exit methods */
list_for_each_entry_reverse(ops, &pernet_list, list) {
if (ops->exit)
@@ -193,6 +202,26 @@
}
#endif
+struct net *get_net_ns_by_pid(pid_t pid)
+{
+ struct task_struct *tsk;
+ struct net *net;
+
+ /* Lookup the network namespace */
+ net = ERR_PTR(-ESRCH);
+ rcu_read_lock();
+ tsk = find_task_by_vpid(pid);
+ if (tsk) {
+ struct nsproxy *nsproxy;
+ nsproxy = task_nsproxy(tsk);
+ if (nsproxy)
+ net = get_net(nsproxy->net_ns);
+ }
+ rcu_read_unlock();
+ return net;
+}
+EXPORT_SYMBOL_GPL(get_net_ns_by_pid);
+
static int __init net_ns_init(void)
{
struct net_generic *ng;
@@ -219,7 +248,7 @@
panic("Could not setup the initial network namespace");
rtnl_lock();
- list_add_tail(&init_net.list, &net_namespace_list);
+ list_add_tail_rcu(&init_net.list, &net_namespace_list);
rtnl_unlock();
mutex_unlock(&net_mutex);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index df30feb..0b4d0d3 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -9,6 +9,7 @@
* Copyright (C) 2002 Red Hat, Inc.
*/
+#include <linux/moduleparam.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/string.h>
@@ -50,6 +51,9 @@
static void zap_completion_queue(void);
static void arp_reply(struct sk_buff *skb);
+static unsigned int carrier_timeout = 4;
+module_param(carrier_timeout, uint, 0644);
+
static void queue_process(struct work_struct *work)
{
struct netpoll_info *npinfo =
@@ -319,6 +323,11 @@
udelay(USEC_PER_POLL);
}
+
+ WARN_ONCE(!irqs_disabled(),
+ "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n",
+ dev->name, ops->ndo_start_xmit);
+
local_irq_restore(flags);
}
@@ -732,7 +741,7 @@
}
atleast = jiffies + HZ/10;
- atmost = jiffies + 4*HZ;
+ atmost = jiffies + carrier_timeout * HZ;
while (!netif_carrier_ok(ndev)) {
if (time_after(jiffies, atmost)) {
printk(KERN_NOTICE
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 19b8c20..0bcecbf 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -131,6 +131,7 @@
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/capability.h>
+#include <linux/hrtimer.h>
#include <linux/freezer.h>
#include <linux/delay.h>
#include <linux/timer.h>
@@ -162,14 +163,13 @@
#include <asm/byteorder.h>
#include <linux/rcupdate.h>
#include <linux/bitops.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/timex.h>
+#include <linux/uaccess.h>
#include <asm/dma.h>
-#include <asm/uaccess.h>
#include <asm/div64.h> /* do_div */
-#include <asm/timex.h>
-#define VERSION "pktgen v2.70: Packet Generator for packet performance testing.\n"
-
+#define VERSION "2.72"
#define IP_NAME_SZ 32
#define MAX_MPLS_LABELS 16 /* This is the max label stack depth */
#define MPLS_STACK_BOTTOM htonl(0x00000100)
@@ -206,7 +206,7 @@
#define PKTGEN_MAGIC 0xbe9be955
#define PG_PROC_DIR "pktgen"
#define PGCTRL "pgctrl"
-static struct proc_dir_entry *pg_proc_dir = NULL;
+static struct proc_dir_entry *pg_proc_dir;
#define MAX_CFLOWS 65536
@@ -231,9 +231,9 @@
*/
struct proc_dir_entry *entry; /* proc file */
struct pktgen_thread *pg_thread;/* the owner */
- struct list_head list; /* Used for chaining in the thread's run-queue */
+ struct list_head list; /* chaining in the thread's run-queue */
- int running; /* if this changes to false, the test will stop */
+ int running; /* if false, the test will stop */
/* If min != max, then we will either do a linear iteration, or
* we will do a random selection from within the range.
@@ -246,33 +246,37 @@
int max_pkt_size; /* = ETH_ZLEN; */
int pkt_overhead; /* overhead for MPLS, VLANs, IPSEC etc */
int nfrags;
- __u32 delay_us; /* Default delay */
- __u32 delay_ns;
+ u64 delay; /* nano-seconds */
+
__u64 count; /* Default No packets to send */
__u64 sofar; /* How many pkts we've sent so far */
__u64 tx_bytes; /* How many bytes we've transmitted */
- __u64 errors; /* Errors when trying to transmit, pkts will be re-sent */
+ __u64 errors; /* Errors when trying to transmit,
+ pkts will be re-sent */
/* runtime counters relating to clone_skb */
- __u64 next_tx_us; /* timestamp of when to tx next */
- __u32 next_tx_ns;
__u64 allocated_skbs;
__u32 clone_count;
int last_ok; /* Was last skb sent?
- * Or a failed transmit of some sort? This will keep
- * sequence numbers in order, for example.
+ * Or a failed transmit of some sort?
+ * This will keep sequence numbers in order
*/
- __u64 started_at; /* micro-seconds */
- __u64 stopped_at; /* micro-seconds */
- __u64 idle_acc; /* micro-seconds */
+ ktime_t next_tx;
+ ktime_t started_at;
+ ktime_t stopped_at;
+ u64 idle_acc; /* nano-seconds */
+
__u32 seq_num;
- int clone_skb; /* Use multiple SKBs during packet gen. If this number
- * is greater than 1, then that many copies of the same
- * packet will be sent before a new packet is allocated.
- * For instance, if you want to send 1024 identical packets
- * before creating a new packet, set clone_skb to 1024.
+ int clone_skb; /*
+ * Use multiple SKBs during packet gen.
+ * If this number is greater than 1, then
+ * that many copies of the same packet will be
+ * sent before a new packet is allocated.
+ * If you want to send 1024 identical packets
+ * before creating a new packet,
+ * set clone_skb to 1024.
*/
char dst_min[IP_NAME_SZ]; /* IP, ie 1.2.3.4 */
@@ -304,8 +308,10 @@
__u16 udp_dst_max; /* exclusive, dest UDP port */
/* DSCP + ECN */
- __u8 tos; /* six most significant bits of (former) IPv4 TOS are for dscp codepoint */
- __u8 traffic_class; /* ditto for the (former) Traffic Class in IPv6 (see RFC 3260, sec. 4) */
+ __u8 tos; /* six MSB of (former) IPv4 TOS
+ are for dscp codepoint */
+ __u8 traffic_class; /* ditto for the (former) Traffic Class in IPv6
+ (see RFC 3260, sec. 4) */
/* MPLS */
unsigned nr_labels; /* Depth of stack, 0 = no MPLS */
@@ -346,15 +352,17 @@
*/
__u16 pad; /* pad out the hh struct to an even 16 bytes */
- struct sk_buff *skb; /* skb we are to transmit next, mainly used for when we
+ struct sk_buff *skb; /* skb we are to transmit next, used for when we
* are transmitting the same one multiple times
*/
- struct net_device *odev; /* The out-going device. Note that the device should
- * have it's pg_info pointer pointing back to this
- * device. This will be set when the user specifies
- * the out-going device name (not when the inject is
- * started as it used to do.)
- */
+ struct net_device *odev; /* The out-going device.
+ * Note that the device should have it's
+ * pg_info pointer pointing back to this
+ * device.
+ * Set when the user specifies the out-going
+ * device name (not when the inject is
+ * started as it used to do.)
+ */
struct flow_state *flows;
unsigned cflows; /* Concurrent flows (config) */
unsigned lflow; /* Flow length (config) */
@@ -379,13 +387,14 @@
};
struct pktgen_thread {
- spinlock_t if_lock;
+ spinlock_t if_lock; /* for list of devices */
struct list_head if_list; /* All device here */
struct list_head th_list;
struct task_struct *tsk;
char result[512];
- /* Field for thread to receive "posted" events terminate, stop ifs etc. */
+ /* Field for thread to receive "posted" events terminate,
+ stop ifs etc. */
u32 control;
int cpu;
@@ -397,24 +406,22 @@
#define REMOVE 1
#define FIND 0
-/** Convert to micro-seconds */
-static inline __u64 tv_to_us(const struct timeval *tv)
+static inline ktime_t ktime_now(void)
{
- __u64 us = tv->tv_usec;
- us += (__u64) tv->tv_sec * (__u64) 1000000;
- return us;
+ struct timespec ts;
+ ktime_get_ts(&ts);
+
+ return timespec_to_ktime(ts);
}
-static __u64 getCurUs(void)
+/* This works even if 32 bit because of careful byte order choice */
+static inline int ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
{
- struct timeval tv;
- do_gettimeofday(&tv);
- return tv_to_us(&tv);
+ return cmp1.tv64 < cmp2.tv64;
}
-/* old include end */
-
-static char version[] __initdata = VERSION;
+static const char version[] =
+ "pktgen " VERSION ": Packet Generator for packet performance testing.\n";
static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *i);
static int pktgen_add_device(struct pktgen_thread *t, const char *ifname);
@@ -424,7 +431,7 @@
static void pktgen_run_all_threads(void);
static void pktgen_reset_all_threads(void);
static void pktgen_stop_all_threads_ifs(void);
-static int pktgen_stop_device(struct pktgen_dev *pkt_dev);
+
static void pktgen_stop(struct pktgen_thread *t);
static void pktgen_clear_counters(struct pktgen_dev *pkt_dev);
@@ -432,10 +439,10 @@
static unsigned int fmt_ip6(char *s, const char ip[16]);
/* Module parameters, defaults. */
-static int pg_count_d = 1000; /* 1000 pkts by default */
-static int pg_delay_d;
-static int pg_clone_skb_d;
-static int debug;
+static int pg_count_d __read_mostly = 1000;
+static int pg_delay_d __read_mostly;
+static int pg_clone_skb_d __read_mostly;
+static int debug __read_mostly;
static DEFINE_MUTEX(pktgen_thread_lock);
static LIST_HEAD(pktgen_threads);
@@ -451,12 +458,12 @@
static int pgctrl_show(struct seq_file *seq, void *v)
{
- seq_puts(seq, VERSION);
+ seq_puts(seq, version);
return 0;
}
-static ssize_t pgctrl_write(struct file *file, const char __user * buf,
- size_t count, loff_t * ppos)
+static ssize_t pgctrl_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
{
int err = 0;
char data[128];
@@ -509,10 +516,9 @@
static int pktgen_if_show(struct seq_file *seq, void *v)
{
- struct pktgen_dev *pkt_dev = seq->private;
- __u64 sa;
- __u64 stopped;
- __u64 now = getCurUs();
+ const struct pktgen_dev *pkt_dev = seq->private;
+ ktime_t stopped;
+ u64 idle;
seq_printf(seq,
"Params: count %llu min_pkt_size: %u max_pkt_size: %u\n",
@@ -520,9 +526,8 @@
pkt_dev->max_pkt_size);
seq_printf(seq,
- " frags: %d delay: %u clone_skb: %d ifname: %s\n",
- pkt_dev->nfrags,
- 1000 * pkt_dev->delay_us + pkt_dev->delay_ns,
+ " frags: %d delay: %llu clone_skb: %d ifname: %s\n",
+ pkt_dev->nfrags, (unsigned long long) pkt_dev->delay,
pkt_dev->clone_skb, pkt_dev->odev->name);
seq_printf(seq, " flows: %u flowlen: %u\n", pkt_dev->cflows,
@@ -549,11 +554,14 @@
" daddr: %s min_daddr: %s max_daddr: %s\n", b1,
b2, b3);
- } else
+ } else {
seq_printf(seq,
- " dst_min: %s dst_max: %s\n src_min: %s src_max: %s\n",
- pkt_dev->dst_min, pkt_dev->dst_max, pkt_dev->src_min,
- pkt_dev->src_max);
+ " dst_min: %s dst_max: %s\n",
+ pkt_dev->dst_min, pkt_dev->dst_max);
+ seq_printf(seq,
+ " src_min: %s src_max: %s\n",
+ pkt_dev->src_min, pkt_dev->src_max);
+ }
seq_puts(seq, " src_mac: ");
@@ -565,7 +573,8 @@
seq_printf(seq, "%pM\n", pkt_dev->dst_mac);
seq_printf(seq,
- " udp_src_min: %d udp_src_max: %d udp_dst_min: %d udp_dst_max: %d\n",
+ " udp_src_min: %d udp_src_max: %d"
+ " udp_dst_min: %d udp_dst_max: %d\n",
pkt_dev->udp_src_min, pkt_dev->udp_src_max,
pkt_dev->udp_dst_min, pkt_dev->udp_dst_max);
@@ -581,23 +590,21 @@
i == pkt_dev->nr_labels-1 ? "\n" : ", ");
}
- if (pkt_dev->vlan_id != 0xffff) {
+ if (pkt_dev->vlan_id != 0xffff)
seq_printf(seq, " vlan_id: %u vlan_p: %u vlan_cfi: %u\n",
- pkt_dev->vlan_id, pkt_dev->vlan_p, pkt_dev->vlan_cfi);
- }
+ pkt_dev->vlan_id, pkt_dev->vlan_p,
+ pkt_dev->vlan_cfi);
- if (pkt_dev->svlan_id != 0xffff) {
+ if (pkt_dev->svlan_id != 0xffff)
seq_printf(seq, " svlan_id: %u vlan_p: %u vlan_cfi: %u\n",
- pkt_dev->svlan_id, pkt_dev->svlan_p, pkt_dev->svlan_cfi);
- }
+ pkt_dev->svlan_id, pkt_dev->svlan_p,
+ pkt_dev->svlan_cfi);
- if (pkt_dev->tos) {
+ if (pkt_dev->tos)
seq_printf(seq, " tos: 0x%02x\n", pkt_dev->tos);
- }
- if (pkt_dev->traffic_class) {
+ if (pkt_dev->traffic_class)
seq_printf(seq, " traffic_class: 0x%02x\n", pkt_dev->traffic_class);
- }
seq_printf(seq, " Flags: ");
@@ -654,17 +661,21 @@
seq_puts(seq, "\n");
- sa = pkt_dev->started_at;
- stopped = pkt_dev->stopped_at;
- if (pkt_dev->running)
- stopped = now; /* not really stopped, more like last-running-at */
+ /* not really stopped, more like last-running-at */
+ stopped = pkt_dev->running ? ktime_now() : pkt_dev->stopped_at;
+ idle = pkt_dev->idle_acc;
+ do_div(idle, NSEC_PER_USEC);
seq_printf(seq,
- "Current:\n pkts-sofar: %llu errors: %llu\n started: %lluus stopped: %lluus idle: %lluus\n",
+ "Current:\n pkts-sofar: %llu errors: %llu\n",
(unsigned long long)pkt_dev->sofar,
- (unsigned long long)pkt_dev->errors, (unsigned long long)sa,
- (unsigned long long)stopped,
- (unsigned long long)pkt_dev->idle_acc);
+ (unsigned long long)pkt_dev->errors);
+
+ seq_printf(seq,
+ " started: %lluus stopped: %lluus idle: %lluus\n",
+ (unsigned long long) ktime_to_us(pkt_dev->started_at),
+ (unsigned long long) ktime_to_us(stopped),
+ (unsigned long long) idle);
seq_printf(seq,
" seq_num: %d cur_dst_mac_offset: %d cur_src_mac_offset: %d\n",
@@ -696,7 +707,8 @@
}
-static int hex32_arg(const char __user *user_buffer, unsigned long maxlen, __u32 *num)
+static int hex32_arg(const char __user *user_buffer, unsigned long maxlen,
+ __u32 *num)
{
int i = 0;
*num = 0;
@@ -846,9 +858,9 @@
/* Read variable name */
len = strn_len(&user_buffer[i], sizeof(name) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
memset(name, 0, sizeof(name));
if (copy_from_user(name, &user_buffer[i], len))
return -EFAULT;
@@ -872,9 +884,9 @@
if (!strcmp(name, "min_pkt_size")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value < 14 + 20 + 8)
value = 14 + 20 + 8;
@@ -889,9 +901,9 @@
if (!strcmp(name, "max_pkt_size")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value < 14 + 20 + 8)
value = 14 + 20 + 8;
@@ -908,9 +920,9 @@
if (!strcmp(name, "pkt_size")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value < 14 + 20 + 8)
value = 14 + 20 + 8;
@@ -925,9 +937,9 @@
if (!strcmp(name, "debug")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
debug = value;
sprintf(pg_result, "OK: debug=%u", debug);
@@ -936,9 +948,9 @@
if (!strcmp(name, "frags")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
pkt_dev->nfrags = value;
sprintf(pg_result, "OK: frags=%u", pkt_dev->nfrags);
@@ -946,26 +958,24 @@
}
if (!strcmp(name, "delay")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
- if (value == 0x7FFFFFFF) {
- pkt_dev->delay_us = 0x7FFFFFFF;
- pkt_dev->delay_ns = 0;
- } else {
- pkt_dev->delay_us = value / 1000;
- pkt_dev->delay_ns = value % 1000;
- }
- sprintf(pg_result, "OK: delay=%u",
- 1000 * pkt_dev->delay_us + pkt_dev->delay_ns);
+ if (value == 0x7FFFFFFF)
+ pkt_dev->delay = ULLONG_MAX;
+ else
+ pkt_dev->delay = (u64)value * NSEC_PER_USEC;
+
+ sprintf(pg_result, "OK: delay=%llu",
+ (unsigned long long) pkt_dev->delay);
return count;
}
if (!strcmp(name, "udp_src_min")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value != pkt_dev->udp_src_min) {
pkt_dev->udp_src_min = value;
@@ -976,9 +986,9 @@
}
if (!strcmp(name, "udp_dst_min")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value != pkt_dev->udp_dst_min) {
pkt_dev->udp_dst_min = value;
@@ -989,9 +999,9 @@
}
if (!strcmp(name, "udp_src_max")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value != pkt_dev->udp_src_max) {
pkt_dev->udp_src_max = value;
@@ -1002,9 +1012,9 @@
}
if (!strcmp(name, "udp_dst_max")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value != pkt_dev->udp_dst_max) {
pkt_dev->udp_dst_max = value;
@@ -1015,9 +1025,9 @@
}
if (!strcmp(name, "clone_skb")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
pkt_dev->clone_skb = value;
@@ -1026,9 +1036,9 @@
}
if (!strcmp(name, "count")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
pkt_dev->count = value;
sprintf(pg_result, "OK: count=%llu",
@@ -1037,9 +1047,9 @@
}
if (!strcmp(name, "src_mac_count")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (pkt_dev->src_mac_count != value) {
pkt_dev->src_mac_count = value;
@@ -1051,9 +1061,9 @@
}
if (!strcmp(name, "dst_mac_count")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (pkt_dev->dst_mac_count != value) {
pkt_dev->dst_mac_count = value;
@@ -1067,9 +1077,9 @@
char f[32];
memset(f, 0, 32);
len = strn_len(&user_buffer[i], sizeof(f) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
if (copy_from_user(f, &user_buffer[i], len))
return -EFAULT;
i += len;
@@ -1168,9 +1178,8 @@
}
if (!strcmp(name, "dst_min") || !strcmp(name, "dst")) {
len = strn_len(&user_buffer[i], sizeof(pkt_dev->dst_min) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
if (copy_from_user(buf, &user_buffer[i], len))
return -EFAULT;
@@ -1190,9 +1199,9 @@
}
if (!strcmp(name, "dst_max")) {
len = strn_len(&user_buffer[i], sizeof(pkt_dev->dst_max) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
if (copy_from_user(buf, &user_buffer[i], len))
return -EFAULT;
@@ -1303,9 +1312,9 @@
}
if (!strcmp(name, "src_min")) {
len = strn_len(&user_buffer[i], sizeof(pkt_dev->src_min) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
if (copy_from_user(buf, &user_buffer[i], len))
return -EFAULT;
buf[len] = 0;
@@ -1324,9 +1333,9 @@
}
if (!strcmp(name, "src_max")) {
len = strn_len(&user_buffer[i], sizeof(pkt_dev->src_max) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
if (copy_from_user(buf, &user_buffer[i], len))
return -EFAULT;
buf[len] = 0;
@@ -1350,9 +1359,9 @@
memcpy(old_dmac, pkt_dev->dst_mac, ETH_ALEN);
len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
memset(valstr, 0, sizeof(valstr));
if (copy_from_user(valstr, &user_buffer[i], len))
return -EFAULT;
@@ -1392,9 +1401,9 @@
memcpy(old_smac, pkt_dev->src_mac, ETH_ALEN);
len = strn_len(&user_buffer[i], sizeof(valstr) - 1);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
memset(valstr, 0, sizeof(valstr));
if (copy_from_user(valstr, &user_buffer[i], len))
return -EFAULT;
@@ -1435,9 +1444,9 @@
if (!strcmp(name, "flows")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value > MAX_CFLOWS)
value = MAX_CFLOWS;
@@ -1449,9 +1458,9 @@
if (!strcmp(name, "flowlen")) {
len = num_arg(&user_buffer[i], 10, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
pkt_dev->lflow = value;
sprintf(pg_result, "OK: flowlen=%u", pkt_dev->lflow);
@@ -1460,9 +1469,9 @@
if (!strcmp(name, "queue_map_min")) {
len = num_arg(&user_buffer[i], 5, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
pkt_dev->queue_map_min = value;
sprintf(pg_result, "OK: queue_map_min=%u", pkt_dev->queue_map_min);
@@ -1471,9 +1480,9 @@
if (!strcmp(name, "queue_map_max")) {
len = num_arg(&user_buffer[i], 5, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
pkt_dev->queue_map_max = value;
sprintf(pg_result, "OK: queue_map_max=%u", pkt_dev->queue_map_max);
@@ -1505,9 +1514,9 @@
if (!strcmp(name, "vlan_id")) {
len = num_arg(&user_buffer[i], 4, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (value <= 4095) {
pkt_dev->vlan_id = value; /* turn on VLAN */
@@ -1532,9 +1541,9 @@
if (!strcmp(name, "vlan_p")) {
len = num_arg(&user_buffer[i], 1, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if ((value <= 7) && (pkt_dev->vlan_id != 0xffff)) {
pkt_dev->vlan_p = value;
@@ -1547,9 +1556,9 @@
if (!strcmp(name, "vlan_cfi")) {
len = num_arg(&user_buffer[i], 1, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if ((value <= 1) && (pkt_dev->vlan_id != 0xffff)) {
pkt_dev->vlan_cfi = value;
@@ -1562,9 +1571,9 @@
if (!strcmp(name, "svlan_id")) {
len = num_arg(&user_buffer[i], 4, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if ((value <= 4095) && ((pkt_dev->vlan_id != 0xffff))) {
pkt_dev->svlan_id = value; /* turn on SVLAN */
@@ -1589,9 +1598,9 @@
if (!strcmp(name, "svlan_p")) {
len = num_arg(&user_buffer[i], 1, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if ((value <= 7) && (pkt_dev->svlan_id != 0xffff)) {
pkt_dev->svlan_p = value;
@@ -1604,9 +1613,9 @@
if (!strcmp(name, "svlan_cfi")) {
len = num_arg(&user_buffer[i], 1, &value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if ((value <= 1) && (pkt_dev->svlan_id != 0xffff)) {
pkt_dev->svlan_cfi = value;
@@ -1620,9 +1629,9 @@
if (!strcmp(name, "tos")) {
__u32 tmp_value = 0;
len = hex32_arg(&user_buffer[i], 2, &tmp_value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (len == 2) {
pkt_dev->tos = tmp_value;
@@ -1636,9 +1645,9 @@
if (!strcmp(name, "traffic_class")) {
__u32 tmp_value = 0;
len = hex32_arg(&user_buffer[i], 2, &tmp_value);
- if (len < 0) {
+ if (len < 0)
return len;
- }
+
i += len;
if (len == 2) {
pkt_dev->traffic_class = tmp_value;
@@ -1670,7 +1679,7 @@
static int pktgen_thread_show(struct seq_file *seq, void *v)
{
struct pktgen_thread *t = seq->private;
- struct pktgen_dev *pkt_dev;
+ const struct pktgen_dev *pkt_dev;
BUG_ON(!t);
@@ -1873,8 +1882,10 @@
remove_proc_entry(pkt_dev->entry->name, pg_proc_dir);
- pkt_dev->entry = create_proc_entry(dev->name, 0600,
- pg_proc_dir);
+ pkt_dev->entry = proc_create_data(dev->name, 0600,
+ pg_proc_dir,
+ &pktgen_if_fops,
+ pkt_dev);
if (!pkt_dev->entry)
printk(KERN_ERR "pktgen: can't move proc "
" entry for '%s'\n", dev->name);
@@ -1908,13 +1919,14 @@
return NOTIFY_DONE;
}
-static struct net_device *pktgen_dev_get_by_name(struct pktgen_dev *pkt_dev, const char *ifname)
+static struct net_device *pktgen_dev_get_by_name(struct pktgen_dev *pkt_dev,
+ const char *ifname)
{
char b[IFNAMSIZ+5];
int i = 0;
- for(i=0; ifname[i] != '@'; i++) {
- if(i == IFNAMSIZ)
+ for (i = 0; ifname[i] != '@'; i++) {
+ if (i == IFNAMSIZ)
break;
b[i] = ifname[i];
@@ -1981,7 +1993,7 @@
printk(KERN_WARNING "pktgen: WARNING: Requested "
"queue_map_min (zero-based) (%d) exceeds valid range "
"[0 - %d] for (%d) queues on %s, resetting\n",
- pkt_dev->queue_map_min, (ntxq ?: 1)- 1, ntxq,
+ pkt_dev->queue_map_min, (ntxq ?: 1) - 1, ntxq,
pkt_dev->odev->name);
pkt_dev->queue_map_min = ntxq - 1;
}
@@ -1989,7 +2001,7 @@
printk(KERN_WARNING "pktgen: WARNING: Requested "
"queue_map_max (zero-based) (%d) exceeds valid range "
"[0 - %d] for (%d) queues on %s, resetting\n",
- pkt_dev->queue_map_max, (ntxq ?: 1)- 1, ntxq,
+ pkt_dev->queue_map_max, (ntxq ?: 1) - 1, ntxq,
pkt_dev->odev->name);
pkt_dev->queue_map_max = ntxq - 1;
}
@@ -2030,7 +2042,8 @@
*/
rcu_read_lock();
- if ((idev = __in6_dev_get(pkt_dev->odev)) != NULL) {
+ idev = __in6_dev_get(pkt_dev->odev);
+ if (idev) {
struct inet6_ifaddr *ifp;
read_lock_bh(&idev->lock);
@@ -2089,27 +2102,40 @@
pkt_dev->nflows = 0;
}
-static void spin(struct pktgen_dev *pkt_dev, __u64 spin_until_us)
+
+static void spin(struct pktgen_dev *pkt_dev, ktime_t spin_until)
{
- __u64 start;
- __u64 now;
+ ktime_t start;
+ s32 remaining;
+ struct hrtimer_sleeper t;
- start = now = getCurUs();
- while (now < spin_until_us) {
- /* TODO: optimize sleeping behavior */
- if (spin_until_us - now > jiffies_to_usecs(1) + 1)
- schedule_timeout_interruptible(1);
- else if (spin_until_us - now > 100) {
- if (!pkt_dev->running)
- return;
- if (need_resched())
+ hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ hrtimer_set_expires(&t.timer, spin_until);
+
+ remaining = ktime_to_us(hrtimer_expires_remaining(&t.timer));
+ if (remaining <= 0)
+ return;
+
+ start = ktime_now();
+ if (remaining < 100)
+ udelay(remaining); /* really small just spin */
+ else {
+ /* see do_nanosleep */
+ hrtimer_init_sleeper(&t, current);
+ do {
+ set_current_state(TASK_INTERRUPTIBLE);
+ hrtimer_start_expires(&t.timer, HRTIMER_MODE_ABS);
+ if (!hrtimer_active(&t.timer))
+ t.task = NULL;
+
+ if (likely(t.task))
schedule();
- }
- now = getCurUs();
+ hrtimer_cancel(&t.timer);
+ } while (t.task && pkt_dev->running && !signal_pending(current));
+ __set_current_state(TASK_RUNNING);
}
-
- pkt_dev->idle_acc += now - start;
+ pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), start));
}
static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
@@ -2120,13 +2146,9 @@
pkt_dev->pkt_overhead += SVLAN_TAG_SIZE(pkt_dev);
}
-static inline int f_seen(struct pktgen_dev *pkt_dev, int flow)
+static inline int f_seen(const struct pktgen_dev *pkt_dev, int flow)
{
-
- if (pkt_dev->flows[flow].flags & F_INIT)
- return 1;
- else
- return 0;
+ return !!(pkt_dev->flows[flow].flags & F_INIT);
}
static inline int f_pick(struct pktgen_dev *pkt_dev)
@@ -2174,7 +2196,7 @@
if (x) {
pkt_dev->flows[flow].x = x;
set_pkt_overhead(pkt_dev);
- pkt_dev->pkt_overhead+=x->props.header_len;
+ pkt_dev->pkt_overhead += x->props.header_len;
}
}
@@ -2313,18 +2335,18 @@
if (!(pkt_dev->flags & F_IPV6)) {
- if ((imn = ntohl(pkt_dev->saddr_min)) < (imx =
- ntohl(pkt_dev->
- saddr_max))) {
+ imn = ntohl(pkt_dev->saddr_min);
+ imx = ntohl(pkt_dev->saddr_max);
+ if (imn < imx) {
__u32 t;
if (pkt_dev->flags & F_IPSRC_RND)
t = random32() % (imx - imn) + imn;
else {
t = ntohl(pkt_dev->cur_saddr);
t++;
- if (t > imx) {
+ if (t > imx)
t = imn;
- }
+
}
pkt_dev->cur_saddr = htonl(t);
}
@@ -2435,14 +2457,14 @@
if (err)
goto error;
- x->curlft.bytes +=skb->len;
+ x->curlft.bytes += skb->len;
x->curlft.packets++;
error:
spin_unlock(&x->lock);
return err;
}
-static inline void free_SAs(struct pktgen_dev *pkt_dev)
+static void free_SAs(struct pktgen_dev *pkt_dev)
{
if (pkt_dev->cflows) {
/* let go of the SAs if we have them */
@@ -2457,7 +2479,7 @@
}
}
-static inline int process_ipsec(struct pktgen_dev *pkt_dev,
+static int process_ipsec(struct pktgen_dev *pkt_dev,
struct sk_buff *skb, __be16 protocol)
{
if (pkt_dev->flags & F_IPSEC_ON) {
@@ -2467,11 +2489,11 @@
int ret;
__u8 *eth;
nhead = x->props.header_len - skb_headroom(skb);
- if (nhead >0) {
+ if (nhead > 0) {
ret = pskb_expand_head(skb, nhead, 0, GFP_ATOMIC);
if (ret < 0) {
printk(KERN_ERR "Error expanding "
- "ipsec packet %d\n",ret);
+ "ipsec packet %d\n", ret);
goto err;
}
}
@@ -2481,13 +2503,13 @@
ret = pktgen_output_ipsec(skb, pkt_dev);
if (ret) {
printk(KERN_ERR "Error creating ipsec "
- "packet %d\n",ret);
+ "packet %d\n", ret);
goto err;
}
/* restore ll */
eth = (__u8 *) skb_push(skb, ETH_HLEN);
memcpy(eth, pkt_dev->hh, 12);
- *(u16 *) & eth[12] = protocol;
+ *(u16 *) ð[12] = protocol;
}
}
return 1;
@@ -2500,9 +2522,9 @@
static void mpls_push(__be32 *mpls, struct pktgen_dev *pkt_dev)
{
unsigned i;
- for (i = 0; i < pkt_dev->nr_labels; i++) {
+ for (i = 0; i < pkt_dev->nr_labels; i++)
*mpls++ = pkt_dev->labels[i] & ~MPLS_STACK_BOTTOM;
- }
+
mpls--;
*mpls |= MPLS_STACK_BOTTOM;
}
@@ -2543,8 +2565,9 @@
mod_cur_headers(pkt_dev);
datalen = (odev->hard_header_len + 16) & ~0xf;
- skb = alloc_skb(pkt_dev->cur_pkt_size + 64 + datalen +
- pkt_dev->pkt_overhead, GFP_ATOMIC);
+ skb = __netdev_alloc_skb(odev,
+ pkt_dev->cur_pkt_size + 64
+ + datalen + pkt_dev->pkt_overhead, GFP_NOWAIT);
if (!skb) {
sprintf(pkt_dev->result, "No memory");
return NULL;
@@ -2668,8 +2691,9 @@
}
}
- /* Stamp the time, and sequence number, convert them to network byte order */
-
+ /* Stamp the time, and sequence number,
+ * convert them to network byte order
+ */
if (pgh) {
struct timeval timestamp;
@@ -2882,8 +2906,9 @@
queue_map = pkt_dev->cur_queue_map;
mod_cur_headers(pkt_dev);
- skb = alloc_skb(pkt_dev->cur_pkt_size + 64 + 16 +
- pkt_dev->pkt_overhead, GFP_ATOMIC);
+ skb = __netdev_alloc_skb(odev,
+ pkt_dev->cur_pkt_size + 64
+ + 16 + pkt_dev->pkt_overhead, GFP_NOWAIT);
if (!skb) {
sprintf(pkt_dev->result, "No memory");
return NULL;
@@ -2922,7 +2947,7 @@
udph = udp_hdr(skb);
memcpy(eth, pkt_dev->hh, 12);
- *(__be16 *) & eth[12] = protocol;
+ *(__be16 *) ð[12] = protocol;
/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 -
@@ -3016,8 +3041,10 @@
}
}
- /* Stamp the time, and sequence number, convert them to network byte order */
- /* should we update cloned packets too ? */
+ /* Stamp the time, and sequence number,
+ * convert them to network byte order
+ * should we update cloned packets too ?
+ */
if (pgh) {
struct timeval timestamp;
@@ -3033,8 +3060,8 @@
return skb;
}
-static inline struct sk_buff *fill_packet(struct net_device *odev,
- struct pktgen_dev *pkt_dev)
+static struct sk_buff *fill_packet(struct net_device *odev,
+ struct pktgen_dev *pkt_dev)
{
if (pkt_dev->flags & F_IPV6)
return fill_packet_ipv6(odev, pkt_dev);
@@ -3072,9 +3099,9 @@
pktgen_clear_counters(pkt_dev);
pkt_dev->running = 1; /* Cranke yeself! */
pkt_dev->skb = NULL;
- pkt_dev->started_at = getCurUs();
- pkt_dev->next_tx_us = getCurUs(); /* Transmit immediately */
- pkt_dev->next_tx_ns = 0;
+ pkt_dev->started_at =
+ pkt_dev->next_tx = ktime_now();
+
set_pkt_overhead(pkt_dev);
strcpy(pkt_dev->result, "Starting");
@@ -3101,17 +3128,14 @@
mutex_unlock(&pktgen_thread_lock);
}
-static int thread_is_running(struct pktgen_thread *t)
+static int thread_is_running(const struct pktgen_thread *t)
{
- struct pktgen_dev *pkt_dev;
- int res = 0;
+ const struct pktgen_dev *pkt_dev;
list_for_each_entry(pkt_dev, &t->if_list, list)
- if (pkt_dev->running) {
- res = 1;
- break;
- }
- return res;
+ if (pkt_dev->running)
+ return 1;
+ return 0;
}
static int pktgen_wait_thread_run(struct pktgen_thread *t)
@@ -3168,7 +3192,8 @@
mutex_unlock(&pktgen_thread_lock);
- schedule_timeout_interruptible(msecs_to_jiffies(125)); /* Propagate thread->control */
+ /* Propagate thread->control */
+ schedule_timeout_interruptible(msecs_to_jiffies(125));
pktgen_wait_all_threads_run();
}
@@ -3186,35 +3211,29 @@
mutex_unlock(&pktgen_thread_lock);
- schedule_timeout_interruptible(msecs_to_jiffies(125)); /* Propagate thread->control */
+ /* Propagate thread->control */
+ schedule_timeout_interruptible(msecs_to_jiffies(125));
pktgen_wait_all_threads_run();
}
static void show_results(struct pktgen_dev *pkt_dev, int nr_frags)
{
- __u64 total_us, bps, mbps, pps, idle;
+ __u64 bps, mbps, pps;
char *p = pkt_dev->result;
+ ktime_t elapsed = ktime_sub(pkt_dev->stopped_at,
+ pkt_dev->started_at);
+ ktime_t idle = ns_to_ktime(pkt_dev->idle_acc);
- total_us = pkt_dev->stopped_at - pkt_dev->started_at;
-
- idle = pkt_dev->idle_acc;
-
- p += sprintf(p, "OK: %llu(c%llu+d%llu) usec, %llu (%dbyte,%dfrags)\n",
- (unsigned long long)total_us,
- (unsigned long long)(total_us - idle),
- (unsigned long long)idle,
+ p += sprintf(p, "OK: %llu(c%llu+d%llu) nsec, %llu (%dbyte,%dfrags)\n",
+ (unsigned long long)ktime_to_us(elapsed),
+ (unsigned long long)ktime_to_us(ktime_sub(elapsed, idle)),
+ (unsigned long long)ktime_to_us(idle),
(unsigned long long)pkt_dev->sofar,
pkt_dev->cur_pkt_size, nr_frags);
- pps = pkt_dev->sofar * USEC_PER_SEC;
-
- while ((total_us >> 32) != 0) {
- pps >>= 1;
- total_us >>= 1;
- }
-
- do_div(pps, total_us);
+ pps = div64_u64(pkt_dev->sofar * NSEC_PER_SEC,
+ ktime_to_ns(elapsed));
bps = pps * 8 * pkt_dev->cur_pkt_size;
@@ -3228,7 +3247,6 @@
}
/* Set stopped-at timer, remove from running list, do counters & statistics */
-
static int pktgen_stop_device(struct pktgen_dev *pkt_dev)
{
int nr_frags = pkt_dev->skb ? skb_shinfo(pkt_dev->skb)->nr_frags : -1;
@@ -3239,7 +3257,9 @@
return -EINVAL;
}
- pkt_dev->stopped_at = getCurUs();
+ kfree_skb(pkt_dev->skb);
+ pkt_dev->skb = NULL;
+ pkt_dev->stopped_at = ktime_now();
pkt_dev->running = 0;
show_results(pkt_dev, nr_frags);
@@ -3258,7 +3278,7 @@
continue;
if (best == NULL)
best = pkt_dev;
- else if (pkt_dev->next_tx_us < best->next_tx_us)
+ else if (ktime_lt(pkt_dev->next_tx, best->next_tx))
best = pkt_dev;
}
if_unlock(t);
@@ -3275,9 +3295,6 @@
list_for_each_entry(pkt_dev, &t->if_list, list) {
pktgen_stop_device(pkt_dev);
- kfree_skb(pkt_dev->skb);
-
- pkt_dev->skb = NULL;
}
if_unlock(t);
@@ -3348,30 +3365,37 @@
mutex_unlock(&pktgen_thread_lock);
}
-static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev)
+static void idle(struct pktgen_dev *pkt_dev)
+{
+ ktime_t idle_start = ktime_now();
+
+ if (need_resched())
+ schedule();
+ else
+ cpu_relax();
+
+ pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), idle_start));
+}
+
+
+static void pktgen_xmit(struct pktgen_dev *pkt_dev)
{
struct net_device *odev = pkt_dev->odev;
- int (*xmit)(struct sk_buff *, struct net_device *)
+ netdev_tx_t (*xmit)(struct sk_buff *, struct net_device *)
= odev->netdev_ops->ndo_start_xmit;
struct netdev_queue *txq;
- __u64 idle_start = 0;
u16 queue_map;
int ret;
- if (pkt_dev->delay_us || pkt_dev->delay_ns) {
- u64 now;
-
- now = getCurUs();
- if (now < pkt_dev->next_tx_us)
- spin(pkt_dev, pkt_dev->next_tx_us);
+ if (pkt_dev->delay) {
+ spin(pkt_dev, pkt_dev->next_tx);
/* This is max DELAY, this has special meaning of
* "never transmit"
*/
- if (pkt_dev->delay_us == 0x7FFFFFFF) {
- pkt_dev->next_tx_us = getCurUs() + pkt_dev->delay_us;
- pkt_dev->next_tx_ns = pkt_dev->delay_ns;
- goto out;
+ if (pkt_dev->delay == ULLONG_MAX) {
+ pkt_dev->next_tx = ktime_add_ns(ktime_now(), ULONG_MAX);
+ return;
}
}
@@ -3383,47 +3407,32 @@
}
txq = netdev_get_tx_queue(odev, queue_map);
- if (netif_tx_queue_stopped(txq) ||
- netif_tx_queue_frozen(txq) ||
- need_resched()) {
- idle_start = getCurUs();
-
- if (!netif_running(odev)) {
+ /* Did we saturate the queue already? */
+ if (netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)) {
+ /* If device is down, then all queues are permnantly frozen */
+ if (netif_running(odev))
+ idle(pkt_dev);
+ else
pktgen_stop_device(pkt_dev);
- kfree_skb(pkt_dev->skb);
- pkt_dev->skb = NULL;
- goto out;
- }
- if (need_resched())
- schedule();
-
- pkt_dev->idle_acc += getCurUs() - idle_start;
-
- if (netif_tx_queue_stopped(txq) ||
- netif_tx_queue_frozen(txq)) {
- pkt_dev->next_tx_us = getCurUs(); /* TODO */
- pkt_dev->next_tx_ns = 0;
- goto out; /* Try the next interface */
- }
+ return;
}
- if (pkt_dev->last_ok || !pkt_dev->skb) {
- if ((++pkt_dev->clone_count >= pkt_dev->clone_skb)
- || (!pkt_dev->skb)) {
- /* build a new pkt */
- kfree_skb(pkt_dev->skb);
+ if (!pkt_dev->skb || (pkt_dev->last_ok &&
+ ++pkt_dev->clone_count >= pkt_dev->clone_skb)) {
+ /* build a new pkt */
+ kfree_skb(pkt_dev->skb);
- pkt_dev->skb = fill_packet(odev, pkt_dev);
- if (pkt_dev->skb == NULL) {
- printk(KERN_ERR "pktgen: ERROR: couldn't "
- "allocate skb in fill_packet.\n");
- schedule();
- pkt_dev->clone_count--; /* back out increment, OOM */
- goto out;
- }
- pkt_dev->allocated_skbs++;
- pkt_dev->clone_count = 0; /* reset counter */
+ pkt_dev->skb = fill_packet(odev, pkt_dev);
+ if (pkt_dev->skb == NULL) {
+ printk(KERN_ERR "pktgen: ERROR: couldn't "
+ "allocate skb in fill_packet.\n");
+ schedule();
+ pkt_dev->clone_count--; /* back out increment, OOM */
+ return;
}
+
+ pkt_dev->allocated_skbs++;
+ pkt_dev->clone_count = 0; /* reset counter */
}
/* fill_packet() might have changed the queue */
@@ -3431,73 +3440,53 @@
txq = netdev_get_tx_queue(odev, queue_map);
__netif_tx_lock_bh(txq);
- if (!netif_tx_queue_stopped(txq) &&
- !netif_tx_queue_frozen(txq)) {
-
+ if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
+ pkt_dev->last_ok = 0;
+ else {
atomic_inc(&(pkt_dev->skb->users));
- retry_now:
+
+ retry_now:
ret = (*xmit)(pkt_dev->skb, odev);
- if (likely(ret == NETDEV_TX_OK)) {
+ switch (ret) {
+ case NETDEV_TX_OK:
txq_trans_update(txq);
pkt_dev->last_ok = 1;
pkt_dev->sofar++;
pkt_dev->seq_num++;
pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
-
- } else if (ret == NETDEV_TX_LOCKED
- && (odev->features & NETIF_F_LLTX)) {
+ break;
+ case NETDEV_TX_LOCKED:
cpu_relax();
goto retry_now;
- } else { /* Retry it next time */
-
- atomic_dec(&(pkt_dev->skb->users));
-
- if (debug && net_ratelimit())
- printk(KERN_INFO "pktgen: Hard xmit error\n");
-
+ default: /* Drivers are not supposed to return other values! */
+ if (net_ratelimit())
+ pr_info("pktgen: %s xmit error: %d\n",
+ odev->name, ret);
pkt_dev->errors++;
+ /* fallthru */
+ case NETDEV_TX_BUSY:
+ /* Retry it next time */
+ atomic_dec(&(pkt_dev->skb->users));
pkt_dev->last_ok = 0;
}
- pkt_dev->next_tx_us = getCurUs();
- pkt_dev->next_tx_ns = 0;
-
- pkt_dev->next_tx_us += pkt_dev->delay_us;
- pkt_dev->next_tx_ns += pkt_dev->delay_ns;
-
- if (pkt_dev->next_tx_ns > 1000) {
- pkt_dev->next_tx_us++;
- pkt_dev->next_tx_ns -= 1000;
- }
+ if (pkt_dev->delay)
+ pkt_dev->next_tx = ktime_add_ns(ktime_now(),
+ pkt_dev->delay);
}
-
- else { /* Retry it next time */
- pkt_dev->last_ok = 0;
- pkt_dev->next_tx_us = getCurUs(); /* TODO */
- pkt_dev->next_tx_ns = 0;
- }
-
__netif_tx_unlock_bh(txq);
/* If pkt_dev->count is zero, then run forever */
if ((pkt_dev->count != 0) && (pkt_dev->sofar >= pkt_dev->count)) {
- if (atomic_read(&(pkt_dev->skb->users)) != 1) {
- idle_start = getCurUs();
- while (atomic_read(&(pkt_dev->skb->users)) != 1) {
- if (signal_pending(current)) {
- break;
- }
- schedule();
- }
- pkt_dev->idle_acc += getCurUs() - idle_start;
+ while (atomic_read(&(pkt_dev->skb->users)) != 1) {
+ if (signal_pending(current))
+ break;
+ idle(pkt_dev);
}
/* Done with this */
pktgen_stop_device(pkt_dev);
- kfree_skb(pkt_dev->skb);
- pkt_dev->skb = NULL;
}
-out:;
}
/*
@@ -3516,7 +3505,8 @@
init_waitqueue_head(&t->queue);
complete(&t->start_done);
- pr_debug("pktgen: starting pktgen/%d: pid=%d\n", cpu, task_pid_nr(current));
+ pr_debug("pktgen: starting pktgen/%d: pid=%d\n",
+ cpu, task_pid_nr(current));
set_current_state(TASK_INTERRUPTIBLE);
@@ -3651,8 +3641,7 @@
pkt_dev->max_pkt_size = ETH_ZLEN;
pkt_dev->nfrags = 0;
pkt_dev->clone_skb = pg_clone_skb_d;
- pkt_dev->delay_us = pg_delay_d / 1000;
- pkt_dev->delay_ns = pg_delay_d % 1000;
+ pkt_dev->delay = pg_delay_d;
pkt_dev->count = pg_count_d;
pkt_dev->sofar = 0;
pkt_dev->udp_src_min = 9; /* sink port */
@@ -3864,10 +3853,15 @@
module_init(pg_init);
module_exit(pg_cleanup);
-MODULE_AUTHOR("Robert Olsson <robert.olsson@its.uu.se");
+MODULE_AUTHOR("Robert Olsson <robert.olsson@its.uu.se>");
MODULE_DESCRIPTION("Packet Generator tool");
MODULE_LICENSE("GPL");
+MODULE_VERSION(VERSION);
module_param(pg_count_d, int, 0);
+MODULE_PARM_DESC(pg_count_d, "Default number of packets to inject");
module_param(pg_delay_d, int, 0);
+MODULE_PARM_DESC(pg_delay_d, "Default delay between packets (nanoseconds)");
module_param(pg_clone_skb_d, int, 0);
+MODULE_PARM_DESC(pg_clone_skb_d, "Default number of copies of the same packet");
module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Enable debugging of pktgen module");
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index d78030f..eb42873 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -35,7 +35,6 @@
#include <linux/security.h>
#include <linux/mutex.h>
#include <linux/if_addr.h>
-#include <linux/nsproxy.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -52,6 +51,7 @@
#include <net/pkt_sched.h>
#include <net/fib_rules.h>
#include <net/rtnetlink.h>
+#include <net/net_namespace.h>
struct rtnl_link
{
@@ -606,7 +606,6 @@
int type, u32 pid, u32 seq, u32 change,
unsigned int flags)
{
- struct netdev_queue *txq;
struct ifinfomsg *ifm;
struct nlmsghdr *nlh;
const struct net_device_stats *stats;
@@ -637,9 +636,8 @@
if (dev->master)
NLA_PUT_U32(skb, IFLA_MASTER, dev->master->ifindex);
- txq = netdev_get_tx_queue(dev, 0);
- if (txq->qdisc_sleeping)
- NLA_PUT_STRING(skb, IFLA_QDISC, txq->qdisc_sleeping->ops->id);
+ if (dev->qdisc)
+ NLA_PUT_STRING(skb, IFLA_QDISC, dev->qdisc->ops->id);
if (dev->ifalias)
NLA_PUT_STRING(skb, IFLA_IFALIAS, dev->ifalias);
@@ -725,25 +723,6 @@
[IFLA_INFO_DATA] = { .type = NLA_NESTED },
};
-static struct net *get_net_ns_by_pid(pid_t pid)
-{
- struct task_struct *tsk;
- struct net *net;
-
- /* Lookup the network namespace */
- net = ERR_PTR(-ESRCH);
- rcu_read_lock();
- tsk = find_task_by_vpid(pid);
- if (tsk) {
- struct nsproxy *nsproxy;
- nsproxy = task_nsproxy(tsk);
- if (nsproxy)
- net = get_net(nsproxy->net_ns);
- }
- rcu_read_unlock();
- return net;
-}
-
static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[])
{
if (dev) {
@@ -993,12 +972,20 @@
{
int err;
struct net_device *dev;
+ unsigned int num_queues = 1;
+ unsigned int real_num_queues = 1;
+ if (ops->get_tx_queues) {
+ err = ops->get_tx_queues(net, tb, &num_queues, &real_num_queues);
+ if (err)
+ goto err;
+ }
err = -ENOMEM;
- dev = alloc_netdev(ops->priv_size, ifname, ops->setup);
+ dev = alloc_netdev_mq(ops->priv_size, ifname, ops->setup, num_queues);
if (!dev)
goto err;
+ dev->real_num_tx_queues = real_num_queues;
if (strchr(dev->name, '%')) {
err = dev_alloc_name(dev, dev->name);
if (err < 0)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 9e0597d..80a9616 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -559,9 +559,6 @@
#endif
#endif
new->vlan_tci = old->vlan_tci;
-#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
- new->do_not_encrypt = old->do_not_encrypt;
-#endif
skb_copy_secmark(new, old);
}
diff --git a/net/core/sock.c b/net/core/sock.c
index bbb25be..30d5446 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -142,7 +142,7 @@
* strings build-time, so that runtime initialization of socket
* locks is fast):
*/
-static const char *af_family_key_strings[AF_MAX+1] = {
+static const char *const af_family_key_strings[AF_MAX+1] = {
"sk_lock-AF_UNSPEC", "sk_lock-AF_UNIX" , "sk_lock-AF_INET" ,
"sk_lock-AF_AX25" , "sk_lock-AF_IPX" , "sk_lock-AF_APPLETALK",
"sk_lock-AF_NETROM", "sk_lock-AF_BRIDGE" , "sk_lock-AF_ATMPVC" ,
@@ -158,7 +158,7 @@
"sk_lock-AF_IEEE802154",
"sk_lock-AF_MAX"
};
-static const char *af_family_slock_key_strings[AF_MAX+1] = {
+static const char *const af_family_slock_key_strings[AF_MAX+1] = {
"slock-AF_UNSPEC", "slock-AF_UNIX" , "slock-AF_INET" ,
"slock-AF_AX25" , "slock-AF_IPX" , "slock-AF_APPLETALK",
"slock-AF_NETROM", "slock-AF_BRIDGE" , "slock-AF_ATMPVC" ,
@@ -174,7 +174,7 @@
"slock-AF_IEEE802154",
"slock-AF_MAX"
};
-static const char *af_family_clock_key_strings[AF_MAX+1] = {
+static const char *const af_family_clock_key_strings[AF_MAX+1] = {
"clock-AF_UNSPEC", "clock-AF_UNIX" , "clock-AF_INET" ,
"clock-AF_AX25" , "clock-AF_IPX" , "clock-AF_APPLETALK",
"clock-AF_NETROM", "clock-AF_BRIDGE" , "clock-AF_ATMPVC" ,
@@ -482,6 +482,8 @@
sk->sk_reuse = valbool;
break;
case SO_TYPE:
+ case SO_PROTOCOL:
+ case SO_DOMAIN:
case SO_ERROR:
ret = -ENOPROTOOPT;
break;
@@ -764,6 +766,14 @@
v.val = sk->sk_type;
break;
+ case SO_PROTOCOL:
+ v.val = sk->sk_protocol;
+ break;
+
+ case SO_DOMAIN:
+ v.val = sk->sk_family;
+ break;
+
case SO_ERROR:
v.val = -sock_error(sk);
if (v.val == 0)
@@ -1025,6 +1035,7 @@
sk->sk_prot = sk->sk_prot_creator = prot;
sock_lock_init(sk);
sock_net_set(sk, get_net(net));
+ atomic_set(&sk->sk_wmem_alloc, 1);
}
return sk;
@@ -1872,7 +1883,6 @@
*/
smp_wmb();
atomic_set(&sk->sk_refcnt, 1);
- atomic_set(&sk->sk_wmem_alloc, 1);
atomic_set(&sk->sk_drops, 0);
}
EXPORT_SYMBOL(sock_init_data);
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 8379496..e0879bf 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -64,6 +64,7 @@
[DCB_ATTR_CAP] = {.type = NLA_NESTED},
[DCB_ATTR_PFC_STATE] = {.type = NLA_U8},
[DCB_ATTR_BCN] = {.type = NLA_NESTED},
+ [DCB_ATTR_APP] = {.type = NLA_NESTED},
};
/* DCB priority flow control to User Priority nested attributes */
@@ -158,6 +159,13 @@
[DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},
};
+/* DCB APP nested attributes. */
+static struct nla_policy dcbnl_app_nest[DCB_APP_ATTR_MAX + 1] = {
+ [DCB_APP_ATTR_IDTYPE] = {.type = NLA_U8},
+ [DCB_APP_ATTR_ID] = {.type = NLA_U16},
+ [DCB_APP_ATTR_PRIORITY] = {.type = NLA_U8},
+};
+
/* standard netlink reply call */
static int dcbnl_reply(u8 value, u8 event, u8 cmd, u8 attr, u32 pid,
u32 seq, u16 flags)
@@ -536,6 +544,120 @@
return ret;
}
+static int dcbnl_getapp(struct net_device *netdev, struct nlattr **tb,
+ u32 pid, u32 seq, u16 flags)
+{
+ struct sk_buff *dcbnl_skb;
+ struct nlmsghdr *nlh;
+ struct dcbmsg *dcb;
+ struct nlattr *app_nest;
+ struct nlattr *app_tb[DCB_APP_ATTR_MAX + 1];
+ u16 id;
+ u8 up, idtype;
+ int ret = -EINVAL;
+
+ if (!tb[DCB_ATTR_APP] || !netdev->dcbnl_ops->getapp)
+ goto out;
+
+ ret = nla_parse_nested(app_tb, DCB_APP_ATTR_MAX, tb[DCB_ATTR_APP],
+ dcbnl_app_nest);
+ if (ret)
+ goto out;
+
+ ret = -EINVAL;
+ /* all must be non-null */
+ if ((!app_tb[DCB_APP_ATTR_IDTYPE]) ||
+ (!app_tb[DCB_APP_ATTR_ID]))
+ goto out;
+
+ /* either by eth type or by socket number */
+ idtype = nla_get_u8(app_tb[DCB_APP_ATTR_IDTYPE]);
+ if ((idtype != DCB_APP_IDTYPE_ETHTYPE) &&
+ (idtype != DCB_APP_IDTYPE_PORTNUM))
+ goto out;
+
+ id = nla_get_u16(app_tb[DCB_APP_ATTR_ID]);
+ up = netdev->dcbnl_ops->getapp(netdev, idtype, id);
+
+ /* send this back */
+ dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!dcbnl_skb)
+ goto out;
+
+ nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
+ dcb = NLMSG_DATA(nlh);
+ dcb->dcb_family = AF_UNSPEC;
+ dcb->cmd = DCB_CMD_GAPP;
+
+ app_nest = nla_nest_start(dcbnl_skb, DCB_ATTR_APP);
+ ret = nla_put_u8(dcbnl_skb, DCB_APP_ATTR_IDTYPE, idtype);
+ if (ret)
+ goto out_cancel;
+
+ ret = nla_put_u16(dcbnl_skb, DCB_APP_ATTR_ID, id);
+ if (ret)
+ goto out_cancel;
+
+ ret = nla_put_u8(dcbnl_skb, DCB_APP_ATTR_PRIORITY, up);
+ if (ret)
+ goto out_cancel;
+
+ nla_nest_end(dcbnl_skb, app_nest);
+ nlmsg_end(dcbnl_skb, nlh);
+
+ ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
+ if (ret)
+ goto nlmsg_failure;
+
+ goto out;
+
+out_cancel:
+ nla_nest_cancel(dcbnl_skb, app_nest);
+nlmsg_failure:
+ kfree_skb(dcbnl_skb);
+out:
+ return ret;
+}
+
+static int dcbnl_setapp(struct net_device *netdev, struct nlattr **tb,
+ u32 pid, u32 seq, u16 flags)
+{
+ int ret = -EINVAL;
+ u16 id;
+ u8 up, idtype;
+ struct nlattr *app_tb[DCB_APP_ATTR_MAX + 1];
+
+ if (!tb[DCB_ATTR_APP] || !netdev->dcbnl_ops->setapp)
+ goto out;
+
+ ret = nla_parse_nested(app_tb, DCB_APP_ATTR_MAX, tb[DCB_ATTR_APP],
+ dcbnl_app_nest);
+ if (ret)
+ goto out;
+
+ ret = -EINVAL;
+ /* all must be non-null */
+ if ((!app_tb[DCB_APP_ATTR_IDTYPE]) ||
+ (!app_tb[DCB_APP_ATTR_ID]) ||
+ (!app_tb[DCB_APP_ATTR_PRIORITY]))
+ goto out;
+
+ /* either by eth type or by socket number */
+ idtype = nla_get_u8(app_tb[DCB_APP_ATTR_IDTYPE]);
+ if ((idtype != DCB_APP_IDTYPE_ETHTYPE) &&
+ (idtype != DCB_APP_IDTYPE_PORTNUM))
+ goto out;
+
+ id = nla_get_u16(app_tb[DCB_APP_ATTR_ID]);
+ up = nla_get_u8(app_tb[DCB_APP_ATTR_PRIORITY]);
+
+ ret = dcbnl_reply(netdev->dcbnl_ops->setapp(netdev, idtype, id, up),
+ RTM_SETDCB, DCB_CMD_SAPP, DCB_ATTR_APP,
+ pid, seq, flags);
+out:
+ return ret;
+}
+
static int __dcbnl_pg_getcfg(struct net_device *netdev, struct nlattr **tb,
u32 pid, u32 seq, u16 flags, int dir)
{
@@ -1093,6 +1215,14 @@
ret = dcbnl_bcn_setcfg(netdev, tb, pid, nlh->nlmsg_seq,
nlh->nlmsg_flags);
goto out;
+ case DCB_CMD_GAPP:
+ ret = dcbnl_getapp(netdev, tb, pid, nlh->nlmsg_seq,
+ nlh->nlmsg_flags);
+ goto out;
+ case DCB_CMD_SAPP:
+ ret = dcbnl_setapp(netdev, tb, pid, nlh->nlmsg_seq,
+ nlh->nlmsg_flags);
+ goto out;
default:
goto errout;
}
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index a27b7f4..f596ce1 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -52,7 +52,7 @@
#ifdef CONFIG_IP_DCCP_CCID3_DEBUG
static const char *ccid3_tx_state_name(enum ccid3_hc_tx_states state)
{
- static char *ccid3_state_names[] = {
+ static const char *const ccid3_state_names[] = {
[TFRC_SSTATE_NO_SENT] = "NO_SENT",
[TFRC_SSTATE_NO_FBACK] = "NO_FBACK",
[TFRC_SSTATE_FBACK] = "FBACK",
@@ -646,7 +646,7 @@
#ifdef CONFIG_IP_DCCP_CCID3_DEBUG
static const char *ccid3_rx_state_name(enum ccid3_hc_rx_states state)
{
- static char *ccid3_rx_state_names[] = {
+ static const char *const ccid3_rx_state_names[] = {
[TFRC_RSTATE_NO_DATA] = "NO_DATA",
[TFRC_RSTATE_DATA] = "DATA",
[TFRC_RSTATE_TERM] = "TERM",
diff --git a/net/dccp/feat.c b/net/dccp/feat.c
index b04160a..972b8dc 100644
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -213,7 +213,7 @@
*/
static const char *dccp_feat_fname(const u8 feat)
{
- static const char *feature_names[] = {
+ static const char *const feature_names[] = {
[DCCPF_RESERVED] = "Reserved",
[DCCPF_CCID] = "CCID",
[DCCPF_SHORT_SEQNOS] = "Allow Short Seqnos",
@@ -236,8 +236,9 @@
return feature_names[feat];
}
-static const char *dccp_feat_sname[] = { "DEFAULT", "INITIALISING", "CHANGING",
- "UNSTABLE", "STABLE" };
+static const char *const dccp_feat_sname[] = {
+ "DEFAULT", "INITIALISING", "CHANGING", "UNSTABLE", "STABLE",
+};
#ifdef CONFIG_IP_DCCP_DEBUG
static const char *dccp_feat_oname(const u8 opt)
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index a0a36c9..d01c00d 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -880,7 +880,7 @@
goto discard_it;
}
-static struct inet_connection_sock_af_ops dccp_ipv4_af_ops = {
+static const struct inet_connection_sock_af_ops dccp_ipv4_af_ops = {
.queue_xmit = ip_queue_xmit,
.send_check = dccp_v4_send_check,
.rebuild_header = inet_sk_rebuild_header,
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 3e70faa..64f011c 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -35,8 +35,8 @@
/* The per-net dccp.v6_ctl_sk is used for sending RSTs and ACKs */
-static struct inet_connection_sock_af_ops dccp_ipv6_mapped;
-static struct inet_connection_sock_af_ops dccp_ipv6_af_ops;
+static const struct inet_connection_sock_af_ops dccp_ipv6_mapped;
+static const struct inet_connection_sock_af_ops dccp_ipv6_af_ops;
static void dccp_v6_hash(struct sock *sk)
{
@@ -1055,7 +1055,7 @@
return err;
}
-static struct inet_connection_sock_af_ops dccp_ipv6_af_ops = {
+static const struct inet_connection_sock_af_ops dccp_ipv6_af_ops = {
.queue_xmit = inet6_csk_xmit,
.send_check = dccp_v6_send_check,
.rebuild_header = inet6_sk_rebuild_header,
@@ -1076,7 +1076,7 @@
/*
* DCCP over IPv4 via INET6 API
*/
-static struct inet_connection_sock_af_ops dccp_ipv6_mapped = {
+static const struct inet_connection_sock_af_ops dccp_ipv6_mapped = {
.queue_xmit = ip_queue_xmit,
.send_check = dccp_v4_send_check,
.rebuild_header = inet_sk_rebuild_header,
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 1bca920..923db06 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -124,7 +124,7 @@
const char *dccp_packet_name(const int type)
{
- static const char *dccp_packet_names[] = {
+ static const char *const dccp_packet_names[] = {
[DCCP_PKT_REQUEST] = "REQUEST",
[DCCP_PKT_RESPONSE] = "RESPONSE",
[DCCP_PKT_DATA] = "DATA",
@@ -147,7 +147,7 @@
const char *dccp_state_name(const int state)
{
- static char *dccp_state_names[] = {
+ static const char *const dccp_state_names[] = {
[DCCP_OPEN] = "OPEN",
[DCCP_REQUESTING] = "REQUESTING",
[DCCP_PARTOPEN] = "PARTOPEN",
diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c
index 923786b..794b5bf 100644
--- a/net/decnet/dn_neigh.c
+++ b/net/decnet/dn_neigh.c
@@ -59,7 +59,7 @@
/*
* For talking to broadcast devices: Ethernet & PPP
*/
-static struct neigh_ops dn_long_ops = {
+static const struct neigh_ops dn_long_ops = {
.family = AF_DECnet,
.error_report = dn_long_error_report,
.output = dn_long_output,
@@ -71,7 +71,7 @@
/*
* For talking to pointopoint and multidrop devices: DDCMP and X.25
*/
-static struct neigh_ops dn_short_ops = {
+static const struct neigh_ops dn_short_ops = {
.family = AF_DECnet,
.error_report = dn_short_error_report,
.output = dn_short_output,
@@ -83,7 +83,7 @@
/*
* For talking to DECnet phase III nodes
*/
-static struct neigh_ops dn_phase3_ops = {
+static const struct neigh_ops dn_phase3_ops = {
.family = AF_DECnet,
.error_report = dn_short_error_report, /* Can use short version here */
.output = dn_phase3_output,
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 1d6ca8a..9383d3e 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -774,7 +774,7 @@
kfree_skb(skb);
- return NET_RX_BAD;
+ return NET_RX_DROP;
}
static int dn_rt_set_next_hop(struct dn_route *rt, struct dn_fib_res *res)
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 41055f3..4b0ea05 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -169,13 +169,13 @@
int port, char *name);
/* tag_dsa.c */
-int dsa_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t dsa_xmit(struct sk_buff *skb, struct net_device *dev);
/* tag_edsa.c */
-int edsa_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
/* tag_trailer.c */
-int trailer_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
#endif
diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c
index 8fa25ba..cdf2d28 100644
--- a/net/dsa/tag_dsa.c
+++ b/net/dsa/tag_dsa.c
@@ -15,7 +15,7 @@
#define DSA_HLEN 4
-int dsa_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t dsa_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
u8 *dsa_header;
diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c
index 815607b..8f53948 100644
--- a/net/dsa/tag_edsa.c
+++ b/net/dsa/tag_edsa.c
@@ -16,7 +16,7 @@
#define DSA_HLEN 4
#define EDSA_HLEN 8
-int edsa_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
u8 *edsa_header;
diff --git a/net/dsa/tag_trailer.c b/net/dsa/tag_trailer.c
index 1c3e30c..a85c829 100644
--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
@@ -13,7 +13,7 @@
#include <linux/netdevice.h>
#include "dsa_priv.h"
-int trailer_xmit(struct sk_buff *skb, struct net_device *dev)
+netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct sk_buff *nskb;
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index f0bbc57..0e0254f 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -1073,7 +1073,7 @@
skb->protocol = htons(ETH_P_IP);
skb_pull(skb, sizeof(struct ec_framehdr));
netif_rx(skb);
- return 0;
+ return NET_RX_SUCCESS;
}
sk = ec_listening_socket(hdr->port, hdr->src_stn, hdr->src_net);
@@ -1084,7 +1084,7 @@
hdr->port))
goto drop;
- return 0;
+ return NET_RX_SUCCESS;
drop:
kfree_skb(skb);
diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile
index f99338a..4068a9f 100644
--- a/net/ieee802154/Makefile
+++ b/net/ieee802154/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_IEEE802154) += nl802154.o af_802154.o
+obj-$(CONFIG_IEEE802154) += nl802154.o af_802154.o wpan-class.o
nl802154-y := netlink.o nl_policy.o
af_802154-y := af_ieee802154.o raw.o dgram.o
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index af66180..cd949d5 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -34,8 +34,8 @@
#include <net/tcp_states.h>
#include <net/route.h>
-#include <net/ieee802154/af_ieee802154.h>
-#include <net/ieee802154/netdevice.h>
+#include <net/af_ieee802154.h>
+#include <net/ieee802154_netdev.h>
#include "af802154.h"
@@ -147,9 +147,7 @@
dev_load(sock_net(sk), ifr.ifr_name);
dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
- if ((dev->type == ARPHRD_IEEE802154 ||
- dev->type == ARPHRD_IEEE802154_PHY) &&
- dev->netdev_ops->ndo_do_ioctl)
+ if (dev->type == ARPHRD_IEEE802154 && dev->netdev_ops->ndo_do_ioctl)
ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq)))
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index ba8b214..77ae685 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -26,9 +26,9 @@
#include <linux/if_arp.h>
#include <linux/list.h>
#include <net/sock.h>
-#include <net/ieee802154/af_ieee802154.h>
-#include <net/ieee802154/mac_def.h>
-#include <net/ieee802154/netdevice.h>
+#include <net/af_ieee802154.h>
+#include <net/ieee802154.h>
+#include <net/ieee802154_netdev.h>
#include <asm/ioctls.h>
@@ -40,9 +40,11 @@
struct dgram_sock {
struct sock sk;
- int bound;
struct ieee802154_addr src_addr;
struct ieee802154_addr dst_addr;
+
+ unsigned bound:1;
+ unsigned want_ack:1;
};
static inline struct dgram_sock *dgram_sk(const struct sock *sk)
@@ -50,7 +52,6 @@
return container_of(sk, struct dgram_sock, sk);
}
-
static void dgram_hash(struct sock *sk)
{
write_lock_bh(&dgram_lock);
@@ -73,6 +74,7 @@
ro->dst_addr.addr_type = IEEE802154_ADDR_LONG;
ro->dst_addr.pan_id = 0xffff;
+ ro->want_ack = 1;
memset(&ro->dst_addr.hwaddr, 0xff, sizeof(ro->dst_addr.hwaddr));
return 0;
}
@@ -86,18 +88,18 @@
{
struct sockaddr_ieee802154 *addr = (struct sockaddr_ieee802154 *)uaddr;
struct dgram_sock *ro = dgram_sk(sk);
- int err = 0;
+ int err = -EINVAL;
struct net_device *dev;
+ lock_sock(sk);
+
ro->bound = 0;
if (len < sizeof(*addr))
- return -EINVAL;
+ goto out;
if (addr->family != AF_IEEE802154)
- return -EINVAL;
-
- lock_sock(sk);
+ goto out;
dev = ieee802154_get_dev(sock_net(sk), &addr->addr);
if (!dev) {
@@ -113,6 +115,7 @@
memcpy(&ro->src_addr, &addr->addr, sizeof(struct ieee802154_addr));
ro->bound = 1;
+ err = 0;
out_put:
dev_put(dev);
out:
@@ -235,7 +238,10 @@
skb_reset_network_header(skb);
- mac_cb(skb)->flags = IEEE802154_FC_TYPE_DATA | MAC_CB_FLAG_ACKREQ;
+ mac_cb(skb)->flags = IEEE802154_FC_TYPE_DATA;
+ if (ro->want_ack)
+ mac_cb(skb)->flags |= MAC_CB_FLAG_ACKREQ;
+
mac_cb(skb)->seq = ieee802154_mlme_ops(dev)->get_dsn(dev);
err = dev_hard_header(skb, dev, ETH_P_IEEE802154, &ro->dst_addr,
ro->bound ? &ro->src_addr : NULL, size);
@@ -380,13 +386,59 @@
static int dgram_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
- return -EOPNOTSUPP;
+ struct dgram_sock *ro = dgram_sk(sk);
+
+ int val, len;
+
+ if (level != SOL_IEEE802154)
+ return -EOPNOTSUPP;
+
+ if (get_user(len, optlen))
+ return -EFAULT;
+
+ len = min_t(unsigned int, len, sizeof(int));
+
+ switch (optname) {
+ case WPAN_WANTACK:
+ val = ro->want_ack;
+ break;
+ default:
+ return -ENOPROTOOPT;
+ }
+
+ if (put_user(len, optlen))
+ return -EFAULT;
+ if (copy_to_user(optval, &val, len))
+ return -EFAULT;
+ return 0;
}
static int dgram_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user optlen)
{
- return -EOPNOTSUPP;
+ struct dgram_sock *ro = dgram_sk(sk);
+ int val;
+ int err = 0;
+
+ if (optlen < sizeof(int))
+ return -EINVAL;
+
+ if (get_user(val, (int __user *)optval))
+ return -EFAULT;
+
+ lock_sock(sk);
+
+ switch (optname) {
+ case WPAN_WANTACK:
+ ro->want_ack = !!val;
+ break;
+ default:
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ release_sock(sk);
+ return err;
}
struct proto ieee802154_dgram_prot = {
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index 27eda9f..2106ecb 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -19,6 +19,7 @@
* Written by:
* Sergey Lapin <slapin@ossfans.org>
* Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
*/
#include <linux/kernel.h>
@@ -26,10 +27,12 @@
#include <linux/netdevice.h>
#include <net/netlink.h>
#include <net/genetlink.h>
+#include <net/sock.h>
#include <linux/nl802154.h>
-#include <net/ieee802154/af_ieee802154.h>
-#include <net/ieee802154/nl802154.h>
-#include <net/ieee802154/netdevice.h>
+#include <net/af_ieee802154.h>
+#include <net/nl802154.h>
+#include <net/ieee802154.h>
+#include <net/ieee802154_netdev.h>
static unsigned int ieee802154_seq_num;
@@ -73,7 +76,7 @@
/* XXX: nlh is right at the start of msg */
void *hdr = genlmsg_data(NLMSG_DATA(msg->data));
- if (!genlmsg_end(msg, hdr))
+ if (genlmsg_end(msg, hdr) < 0)
goto out;
return genlmsg_multicast(msg, 0, ieee802154_coord_mcgrp.id,
@@ -229,7 +232,7 @@
EXPORT_SYMBOL(ieee802154_nl_beacon_indic);
int ieee802154_nl_scan_confirm(struct net_device *dev,
- u8 status, u8 scan_type, u32 unscanned,
+ u8 status, u8 scan_type, u32 unscanned, u8 page,
u8 *edl/* , struct list_head *pan_desc_list */)
{
struct sk_buff *msg;
@@ -248,6 +251,7 @@
NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, scan_type);
NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, unscanned);
+ NLA_PUT_U8(msg, IEEE802154_ATTR_PAGE, page);
if (edl)
NLA_PUT(msg, IEEE802154_ATTR_ED_LIST, 27, edl);
@@ -260,6 +264,60 @@
}
EXPORT_SYMBOL(ieee802154_nl_scan_confirm);
+int ieee802154_nl_start_confirm(struct net_device *dev, u8 status)
+{
+ struct sk_buff *msg;
+
+ pr_debug("%s\n", __func__);
+
+ msg = ieee802154_nl_create(0, IEEE802154_START_CONF);
+ if (!msg)
+ return -ENOBUFS;
+
+ NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+ NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+ NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+ dev->dev_addr);
+
+ NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+ return ieee802154_nl_finish(msg);
+
+nla_put_failure:
+ nlmsg_free(msg);
+ return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_start_confirm);
+
+static int ieee802154_nl_fill_iface(struct sk_buff *msg, u32 pid,
+ u32 seq, int flags, struct net_device *dev)
+{
+ void *hdr;
+
+ pr_debug("%s\n", __func__);
+
+ hdr = genlmsg_put(msg, 0, seq, &ieee802154_coordinator_family, flags,
+ IEEE802154_LIST_IFACE);
+ if (!hdr)
+ goto out;
+
+ NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+ NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+
+ NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+ dev->dev_addr);
+ NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR,
+ ieee802154_mlme_ops(dev)->get_short_addr(dev));
+ NLA_PUT_U16(msg, IEEE802154_ATTR_PAN_ID,
+ ieee802154_mlme_ops(dev)->get_pan_id(dev));
+ return genlmsg_end(msg, hdr);
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+out:
+ return -EMSGSIZE;
+}
+
/* Requests from userspace */
static struct net_device *ieee802154_nl_get_dev(struct genl_info *info)
{
@@ -272,7 +330,7 @@
dev = dev_get_by_name(&init_net, name);
} else if (info->attrs[IEEE802154_ATTR_DEV_INDEX])
dev = dev_get_by_index(&init_net,
- nla_get_u32(info->attrs[IEEE802154_ATTR_DEV_INDEX]));
+ nla_get_u32(info->attrs[IEEE802154_ATTR_DEV_INDEX]));
else
return NULL;
@@ -292,6 +350,7 @@
{
struct net_device *dev;
struct ieee802154_addr addr;
+ u8 page;
int ret = -EINVAL;
if (!info->attrs[IEEE802154_ATTR_CHANNEL] ||
@@ -317,8 +376,14 @@
}
addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+ if (info->attrs[IEEE802154_ATTR_PAGE])
+ page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
+ else
+ page = 0;
+
ret = ieee802154_mlme_ops(dev)->assoc_req(dev, &addr,
nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]),
+ page,
nla_get_u8(info->attrs[IEEE802154_ATTR_CAPABILITY]));
dev_put(dev);
@@ -401,6 +466,7 @@
struct ieee802154_addr addr;
u8 channel, bcn_ord, sf_ord;
+ u8 page;
int pan_coord, blx, coord_realign;
int ret;
@@ -431,7 +497,19 @@
blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
- ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel,
+ if (info->attrs[IEEE802154_ATTR_PAGE])
+ page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
+ else
+ page = 0;
+
+
+ if (addr.short_addr == IEEE802154_ADDR_BROADCAST) {
+ ieee802154_nl_start_confirm(dev, IEEE802154_NO_SHORT_ADDRESS);
+ dev_put(dev);
+ return -EINVAL;
+ }
+
+ ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel, page,
bcn_ord, sf_ord, pan_coord, blx, coord_realign);
dev_put(dev);
@@ -445,6 +523,7 @@
u8 type;
u32 channels;
u8 duration;
+ u8 page;
if (!info->attrs[IEEE802154_ATTR_SCAN_TYPE] ||
!info->attrs[IEEE802154_ATTR_CHANNELS] ||
@@ -459,13 +538,80 @@
channels = nla_get_u32(info->attrs[IEEE802154_ATTR_CHANNELS]);
duration = nla_get_u8(info->attrs[IEEE802154_ATTR_DURATION]);
- ret = ieee802154_mlme_ops(dev)->scan_req(dev, type, channels,
+ if (info->attrs[IEEE802154_ATTR_PAGE])
+ page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
+ else
+ page = 0;
+
+
+ ret = ieee802154_mlme_ops(dev)->scan_req(dev, type, channels, page,
duration);
dev_put(dev);
return ret;
}
+static int ieee802154_list_iface(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ /* Request for interface name, index, type, IEEE address,
+ PAN Id, short address */
+ struct sk_buff *msg;
+ struct net_device *dev = NULL;
+ int rc = -ENOBUFS;
+
+ pr_debug("%s\n", __func__);
+
+ dev = ieee802154_nl_get_dev(info);
+ if (!dev)
+ return -ENODEV;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg)
+ goto out_dev;
+
+ rc = ieee802154_nl_fill_iface(msg, info->snd_pid, info->snd_seq,
+ 0, dev);
+ if (rc < 0)
+ goto out_free;
+
+ dev_put(dev);
+
+ return genlmsg_unicast(&init_net, msg, info->snd_pid);
+out_free:
+ nlmsg_free(msg);
+out_dev:
+ dev_put(dev);
+ return rc;
+
+}
+
+static int ieee802154_dump_iface(struct sk_buff *skb,
+ struct netlink_callback *cb)
+{
+ struct net *net = sock_net(skb->sk);
+ struct net_device *dev;
+ int idx;
+ int s_idx = cb->args[0];
+
+ pr_debug("%s\n", __func__);
+
+ idx = 0;
+ for_each_netdev(net, dev) {
+ if (idx < s_idx || (dev->type != ARPHRD_IEEE802154))
+ goto cont;
+
+ if (ieee802154_nl_fill_iface(skb, NETLINK_CB(cb->skb).pid,
+ cb->nlh->nlmsg_seq, NLM_F_MULTI, dev) < 0)
+ break;
+cont:
+ idx++;
+ }
+ cb->args[0] = idx;
+
+ return skb->len;
+}
+
#define IEEE802154_OP(_cmd, _func) \
{ \
.cmd = _cmd, \
@@ -475,12 +621,22 @@
.flags = GENL_ADMIN_PERM, \
}
+#define IEEE802154_DUMP(_cmd, _func, _dump) \
+ { \
+ .cmd = _cmd, \
+ .policy = ieee802154_policy, \
+ .doit = _func, \
+ .dumpit = _dump, \
+ }
+
static struct genl_ops ieee802154_coordinator_ops[] = {
IEEE802154_OP(IEEE802154_ASSOCIATE_REQ, ieee802154_associate_req),
IEEE802154_OP(IEEE802154_ASSOCIATE_RESP, ieee802154_associate_resp),
IEEE802154_OP(IEEE802154_DISASSOCIATE_REQ, ieee802154_disassociate_req),
IEEE802154_OP(IEEE802154_SCAN_REQ, ieee802154_scan_req),
IEEE802154_OP(IEEE802154_START_REQ, ieee802154_start_req),
+ IEEE802154_DUMP(IEEE802154_LIST_IFACE, ieee802154_list_iface,
+ ieee802154_dump_iface),
};
static int __init ieee802154_nl_init(void)
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index c7d71d1..2363ebe 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -24,7 +24,7 @@
#define NLA_HW_ADDR NLA_U64
-struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
+const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
[IEEE802154_ATTR_DEV_NAME] = { .type = NLA_STRING, },
[IEEE802154_ATTR_DEV_INDEX] = { .type = NLA_U32, },
@@ -33,6 +33,7 @@
[IEEE802154_ATTR_HW_ADDR] = { .type = NLA_HW_ADDR, },
[IEEE802154_ATTR_PAN_ID] = { .type = NLA_U16, },
[IEEE802154_ATTR_CHANNEL] = { .type = NLA_U8, },
+ [IEEE802154_ATTR_PAGE] = { .type = NLA_U8, },
[IEEE802154_ATTR_COORD_SHORT_ADDR] = { .type = NLA_U16, },
[IEEE802154_ATTR_COORD_HW_ADDR] = { .type = NLA_HW_ADDR, },
[IEEE802154_ATTR_COORD_PAN_ID] = { .type = NLA_U16, },
@@ -50,3 +51,4 @@
[IEEE802154_ATTR_DURATION] = { .type = NLA_U8, },
[IEEE802154_ATTR_ED_LIST] = { .len = 27 },
};
+
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
index 9315977..4681501 100644
--- a/net/ieee802154/raw.c
+++ b/net/ieee802154/raw.c
@@ -26,7 +26,7 @@
#include <linux/if_arp.h>
#include <linux/list.h>
#include <net/sock.h>
-#include <net/ieee802154/af_ieee802154.h>
+#include <net/af_ieee802154.h>
#include "af802154.h"
@@ -74,8 +74,7 @@
goto out;
}
- if (dev->type != ARPHRD_IEEE802154_PHY &&
- dev->type != ARPHRD_IEEE802154) {
+ if (dev->type != ARPHRD_IEEE802154) {
err = -ENODEV;
goto out_put;
}
diff --git a/net/ieee802154/wpan-class.c b/net/ieee802154/wpan-class.c
new file mode 100644
index 0000000..f306604
--- /dev/null
+++ b/net/ieee802154/wpan-class.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include <net/wpan-phy.h>
+
+#define MASTER_SHOW_COMPLEX(name, format_string, args...) \
+static ssize_t name ## _show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct wpan_phy *phy = container_of(dev, struct wpan_phy, dev); \
+ int ret; \
+ \
+ mutex_lock(&phy->pib_lock); \
+ ret = sprintf(buf, format_string "\n", args); \
+ mutex_unlock(&phy->pib_lock); \
+ return ret; \
+}
+
+#define MASTER_SHOW(field, format_string) \
+ MASTER_SHOW_COMPLEX(field, format_string, phy->field)
+
+MASTER_SHOW(current_channel, "%d");
+MASTER_SHOW(current_page, "%d");
+MASTER_SHOW(channels_supported, "%#x");
+MASTER_SHOW_COMPLEX(transmit_power, "%d +- %d dB",
+ ((signed char) (phy->transmit_power << 2)) >> 2,
+ (phy->transmit_power >> 6) ? (phy->transmit_power >> 6) * 3 : 1 );
+MASTER_SHOW(cca_mode, "%d");
+
+static struct device_attribute pmib_attrs[] = {
+ __ATTR_RO(current_channel),
+ __ATTR_RO(current_page),
+ __ATTR_RO(channels_supported),
+ __ATTR_RO(transmit_power),
+ __ATTR_RO(cca_mode),
+ {},
+};
+
+static void wpan_phy_release(struct device *d)
+{
+ struct wpan_phy *phy = container_of(d, struct wpan_phy, dev);
+ kfree(phy);
+}
+
+static struct class wpan_phy_class = {
+ .name = "ieee802154",
+ .dev_release = wpan_phy_release,
+ .dev_attrs = pmib_attrs,
+};
+
+static DEFINE_MUTEX(wpan_phy_mutex);
+static int wpan_phy_idx;
+
+static int wpan_phy_match(struct device *dev, void *data)
+{
+ return !strcmp(dev_name(dev), (const char *)data);
+}
+
+struct wpan_phy *wpan_phy_find(const char *str)
+{
+ struct device *dev;
+
+ if (WARN_ON(!str))
+ return NULL;
+
+ dev = class_find_device(&wpan_phy_class, NULL,
+ (void *)str, wpan_phy_match);
+ if (!dev)
+ return NULL;
+
+ return container_of(dev, struct wpan_phy, dev);
+}
+EXPORT_SYMBOL(wpan_phy_find);
+
+static int wpan_phy_idx_valid(int idx)
+{
+ return idx >= 0;
+}
+
+struct wpan_phy *wpan_phy_alloc(size_t priv_size)
+{
+ struct wpan_phy *phy = kzalloc(sizeof(*phy) + priv_size,
+ GFP_KERNEL);
+
+ mutex_lock(&wpan_phy_mutex);
+ phy->idx = wpan_phy_idx++;
+ if (unlikely(!wpan_phy_idx_valid(phy->idx))) {
+ wpan_phy_idx--;
+ mutex_unlock(&wpan_phy_mutex);
+ kfree(phy);
+ return NULL;
+ }
+ mutex_unlock(&wpan_phy_mutex);
+
+ mutex_init(&phy->pib_lock);
+
+ device_initialize(&phy->dev);
+ dev_set_name(&phy->dev, "wpan-phy%d", phy->idx);
+
+ phy->dev.class = &wpan_phy_class;
+
+ return phy;
+}
+EXPORT_SYMBOL(wpan_phy_alloc);
+
+int wpan_phy_register(struct device *parent, struct wpan_phy *phy)
+{
+ phy->dev.parent = parent;
+
+ return device_add(&phy->dev);
+}
+EXPORT_SYMBOL(wpan_phy_register);
+
+void wpan_phy_unregister(struct wpan_phy *phy)
+{
+ device_del(&phy->dev);
+}
+EXPORT_SYMBOL(wpan_phy_unregister);
+
+void wpan_phy_free(struct wpan_phy *phy)
+{
+ put_device(&phy->dev);
+}
+EXPORT_SYMBOL(wpan_phy_free);
+
+static int __init wpan_phy_class_init(void)
+{
+ return class_register(&wpan_phy_class);
+}
+subsys_initcall(wpan_phy_class_init);
+
+static void __exit wpan_phy_class_exit(void)
+{
+ class_unregister(&wpan_phy_class);
+}
+module_exit(wpan_phy_class_exit);
+
+MODULE_DESCRIPTION("IEEE 802.15.4 device class");
+MODULE_LICENSE("GPL v2");
+
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 566ea6c..6c30a73 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -124,7 +124,6 @@
static DEFINE_SPINLOCK(inetsw_lock);
struct ipv4_config ipv4_config;
-
EXPORT_SYMBOL(ipv4_config);
/* New destruction routine */
@@ -139,12 +138,12 @@
sk_mem_reclaim(sk);
if (sk->sk_type == SOCK_STREAM && sk->sk_state != TCP_CLOSE) {
- printk("Attempt to release TCP socket in state %d %p\n",
+ pr_err("Attempt to release TCP socket in state %d %p\n",
sk->sk_state, sk);
return;
}
if (!sock_flag(sk, SOCK_DEAD)) {
- printk("Attempt to release alive inet socket %p\n", sk);
+ pr_err("Attempt to release alive inet socket %p\n", sk);
return;
}
@@ -157,6 +156,7 @@
dst_release(sk->sk_dst_cache);
sk_refcnt_debug_dec(sk);
}
+EXPORT_SYMBOL(inet_sock_destruct);
/*
* The routines beyond this point handle the behaviour of an AF_INET
@@ -219,6 +219,7 @@
release_sock(sk);
return err;
}
+EXPORT_SYMBOL(inet_listen);
u32 inet_ehash_secret __read_mostly;
EXPORT_SYMBOL(inet_ehash_secret);
@@ -435,9 +436,11 @@
}
return 0;
}
+EXPORT_SYMBOL(inet_release);
/* It is off by default, see below. */
int sysctl_ip_nonlocal_bind __read_mostly;
+EXPORT_SYMBOL(sysctl_ip_nonlocal_bind);
int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
@@ -519,6 +522,7 @@
out:
return err;
}
+EXPORT_SYMBOL(inet_bind);
int inet_dgram_connect(struct socket *sock, struct sockaddr * uaddr,
int addr_len, int flags)
@@ -532,6 +536,7 @@
return -EAGAIN;
return sk->sk_prot->connect(sk, (struct sockaddr *)uaddr, addr_len);
}
+EXPORT_SYMBOL(inet_dgram_connect);
static long inet_wait_for_connect(struct sock *sk, long timeo)
{
@@ -641,6 +646,7 @@
sock->state = SS_DISCONNECTING;
goto out;
}
+EXPORT_SYMBOL(inet_stream_connect);
/*
* Accept a pending connection. The TCP layer now gives BSD semantics.
@@ -668,6 +674,7 @@
do_err:
return err;
}
+EXPORT_SYMBOL(inet_accept);
/*
@@ -699,6 +706,7 @@
*uaddr_len = sizeof(*sin);
return 0;
}
+EXPORT_SYMBOL(inet_getname);
int inet_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
size_t size)
@@ -711,9 +719,11 @@
return sk->sk_prot->sendmsg(iocb, sk, msg, size);
}
+EXPORT_SYMBOL(inet_sendmsg);
-static ssize_t inet_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags)
+static ssize_t inet_sendpage(struct socket *sock, struct page *page, int offset,
+ size_t size, int flags)
{
struct sock *sk = sock->sk;
@@ -780,6 +790,7 @@
release_sock(sk);
return err;
}
+EXPORT_SYMBOL(inet_shutdown);
/*
* ioctl() calls you can issue on an INET socket. Most of these are
@@ -798,44 +809,45 @@
struct net *net = sock_net(sk);
switch (cmd) {
- case SIOCGSTAMP:
- err = sock_get_timestamp(sk, (struct timeval __user *)arg);
- break;
- case SIOCGSTAMPNS:
- err = sock_get_timestampns(sk, (struct timespec __user *)arg);
- break;
- case SIOCADDRT:
- case SIOCDELRT:
- case SIOCRTMSG:
- err = ip_rt_ioctl(net, cmd, (void __user *)arg);
- break;
- case SIOCDARP:
- case SIOCGARP:
- case SIOCSARP:
- err = arp_ioctl(net, cmd, (void __user *)arg);
- break;
- case SIOCGIFADDR:
- case SIOCSIFADDR:
- case SIOCGIFBRDADDR:
- case SIOCSIFBRDADDR:
- case SIOCGIFNETMASK:
- case SIOCSIFNETMASK:
- case SIOCGIFDSTADDR:
- case SIOCSIFDSTADDR:
- case SIOCSIFPFLAGS:
- case SIOCGIFPFLAGS:
- case SIOCSIFFLAGS:
- err = devinet_ioctl(net, cmd, (void __user *)arg);
- break;
- default:
- if (sk->sk_prot->ioctl)
- err = sk->sk_prot->ioctl(sk, cmd, arg);
- else
- err = -ENOIOCTLCMD;
- break;
+ case SIOCGSTAMP:
+ err = sock_get_timestamp(sk, (struct timeval __user *)arg);
+ break;
+ case SIOCGSTAMPNS:
+ err = sock_get_timestampns(sk, (struct timespec __user *)arg);
+ break;
+ case SIOCADDRT:
+ case SIOCDELRT:
+ case SIOCRTMSG:
+ err = ip_rt_ioctl(net, cmd, (void __user *)arg);
+ break;
+ case SIOCDARP:
+ case SIOCGARP:
+ case SIOCSARP:
+ err = arp_ioctl(net, cmd, (void __user *)arg);
+ break;
+ case SIOCGIFADDR:
+ case SIOCSIFADDR:
+ case SIOCGIFBRDADDR:
+ case SIOCSIFBRDADDR:
+ case SIOCGIFNETMASK:
+ case SIOCSIFNETMASK:
+ case SIOCGIFDSTADDR:
+ case SIOCSIFDSTADDR:
+ case SIOCSIFPFLAGS:
+ case SIOCGIFPFLAGS:
+ case SIOCSIFFLAGS:
+ err = devinet_ioctl(net, cmd, (void __user *)arg);
+ break;
+ default:
+ if (sk->sk_prot->ioctl)
+ err = sk->sk_prot->ioctl(sk, cmd, arg);
+ else
+ err = -ENOIOCTLCMD;
+ break;
}
return err;
}
+EXPORT_SYMBOL(inet_ioctl);
const struct proto_ops inet_stream_ops = {
.family = PF_INET,
@@ -862,6 +874,7 @@
.compat_getsockopt = compat_sock_common_getsockopt,
#endif
};
+EXPORT_SYMBOL(inet_stream_ops);
const struct proto_ops inet_dgram_ops = {
.family = PF_INET,
@@ -887,6 +900,7 @@
.compat_getsockopt = compat_sock_common_getsockopt,
#endif
};
+EXPORT_SYMBOL(inet_dgram_ops);
/*
* For SOCK_RAW sockets; should be the same as inet_dgram_ops but without
@@ -1016,6 +1030,7 @@
p->type);
goto out;
}
+EXPORT_SYMBOL(inet_register_protosw);
void inet_unregister_protosw(struct inet_protosw *p)
{
@@ -1031,6 +1046,7 @@
synchronize_net();
}
}
+EXPORT_SYMBOL(inet_unregister_protosw);
/*
* Shall we try to damage output packets if routing dev changes?
@@ -1141,7 +1157,6 @@
return err;
}
-
EXPORT_SYMBOL(inet_sk_rebuild_header);
static int inet_gso_send_check(struct sk_buff *skb)
@@ -1187,6 +1202,7 @@
int proto;
int ihl;
int id;
+ unsigned int offset = 0;
if (!(features & NETIF_F_V4_CSUM))
features &= ~NETIF_F_SG;
@@ -1229,7 +1245,14 @@
skb = segs;
do {
iph = ip_hdr(skb);
- iph->id = htons(id++);
+ if (proto == IPPROTO_UDP) {
+ iph->id = htons(id);
+ iph->frag_off = htons(offset >> 3);
+ if (skb->next != NULL)
+ iph->frag_off |= htons(IP_MF);
+ offset += (skb->len - skb->mac_len - iph->ihl * 4);
+ } else
+ iph->id = htons(id++);
iph->tot_len = htons(skb->len - skb->mac_len);
iph->check = 0;
iph->check = ip_fast_csum(skb_network_header(skb), iph->ihl);
@@ -1361,7 +1384,6 @@
}
return rc;
}
-
EXPORT_SYMBOL_GPL(inet_ctl_sock_create);
unsigned long snmp_fold_field(void *mib[], int offt)
@@ -1425,6 +1447,8 @@
static struct net_protocol udp_protocol = {
.handler = udp_rcv,
.err_handler = udp_err,
+ .gso_send_check = udp4_ufo_send_check,
+ .gso_segment = udp4_ufo_fragment,
.no_policy = 1,
.netns_ok = 1,
};
@@ -1666,19 +1690,3 @@
MODULE_ALIAS_NETPROTO(PF_INET);
-EXPORT_SYMBOL(inet_accept);
-EXPORT_SYMBOL(inet_bind);
-EXPORT_SYMBOL(inet_dgram_connect);
-EXPORT_SYMBOL(inet_dgram_ops);
-EXPORT_SYMBOL(inet_getname);
-EXPORT_SYMBOL(inet_ioctl);
-EXPORT_SYMBOL(inet_listen);
-EXPORT_SYMBOL(inet_register_protosw);
-EXPORT_SYMBOL(inet_release);
-EXPORT_SYMBOL(inet_sendmsg);
-EXPORT_SYMBOL(inet_shutdown);
-EXPORT_SYMBOL(inet_sock_destruct);
-EXPORT_SYMBOL(inet_stream_connect);
-EXPORT_SYMBOL(inet_stream_ops);
-EXPORT_SYMBOL(inet_unregister_protosw);
-EXPORT_SYMBOL(sysctl_ip_nonlocal_bind);
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 090e999..4e80f33 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -130,7 +130,7 @@
static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
static void parp_redo(struct sk_buff *skb);
-static struct neigh_ops arp_generic_ops = {
+static const struct neigh_ops arp_generic_ops = {
.family = AF_INET,
.solicit = arp_solicit,
.error_report = arp_error_report,
@@ -140,7 +140,7 @@
.queue_xmit = dev_queue_xmit,
};
-static struct neigh_ops arp_hh_ops = {
+static const struct neigh_ops arp_hh_ops = {
.family = AF_INET,
.solicit = arp_solicit,
.error_report = arp_error_report,
@@ -150,7 +150,7 @@
.queue_xmit = dev_queue_xmit,
};
-static struct neigh_ops arp_direct_ops = {
+static const struct neigh_ops arp_direct_ops = {
.family = AF_INET,
.output = dev_queue_xmit,
.connected_output = dev_queue_xmit,
@@ -158,7 +158,7 @@
.queue_xmit = dev_queue_xmit,
};
-struct neigh_ops arp_broken_ops = {
+const struct neigh_ops arp_broken_ops = {
.family = AF_INET,
.solicit = arp_solicit,
.error_report = arp_error_report,
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 63c2fa7..291bdf5 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -48,7 +48,7 @@
* Patrick McHardy <kaber@trash.net>
*/
-#define VERSION "0.408"
+#define VERSION "0.409"
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -164,6 +164,14 @@
static struct tnode *halve(struct trie *t, struct tnode *tn);
/* tnodes to free after resize(); protected by RTNL */
static struct tnode *tnode_free_head;
+static size_t tnode_free_size;
+
+/*
+ * synchronize_rcu after call_rcu for that many pages; it should be especially
+ * useful before resizing the root node with PREEMPT_NONE configs; the value was
+ * obtained experimentally, aiming to avoid visible slowdown.
+ */
+static const int sync_pages = 128;
static struct kmem_cache *fn_alias_kmem __read_mostly;
static struct kmem_cache *trie_leaf_kmem __read_mostly;
@@ -317,8 +325,7 @@
static const int halve_threshold = 25;
static const int inflate_threshold = 50;
static const int halve_threshold_root = 15;
-static const int inflate_threshold_root = 25;
-
+static const int inflate_threshold_root = 30;
static void __alias_free_mem(struct rcu_head *head)
{
@@ -393,6 +400,8 @@
BUG_ON(IS_LEAF(tn));
tn->tnode_free = tnode_free_head;
tnode_free_head = tn;
+ tnode_free_size += sizeof(struct tnode) +
+ (sizeof(struct node *) << tn->bits);
}
static void tnode_free_flush(void)
@@ -404,6 +413,11 @@
tn->tnode_free = NULL;
tnode_free(tn);
}
+
+ if (tnode_free_size >= PAGE_SIZE * sync_pages) {
+ tnode_free_size = 0;
+ synchronize_rcu();
+ }
}
static struct leaf *leaf_new(void)
@@ -499,14 +513,14 @@
rcu_assign_pointer(tn->child[i], n);
}
+#define MAX_WORK 10
static struct node *resize(struct trie *t, struct tnode *tn)
{
int i;
- int err = 0;
struct tnode *old_tn;
int inflate_threshold_use;
int halve_threshold_use;
- int max_resize;
+ int max_work;
if (!tn)
return NULL;
@@ -521,18 +535,7 @@
}
/* One child */
if (tn->empty_children == tnode_child_length(tn) - 1)
- for (i = 0; i < tnode_child_length(tn); i++) {
- struct node *n;
-
- n = tn->child[i];
- if (!n)
- continue;
-
- /* compress one level */
- node_set_parent(n, NULL);
- tnode_free_safe(tn);
- return n;
- }
+ goto one_child;
/*
* Double as long as the resulting node has a number of
* nonempty nodes that are above the threshold.
@@ -601,14 +604,17 @@
/* Keep root node larger */
- if (!tn->parent)
+ if (!node_parent((struct node*) tn)) {
inflate_threshold_use = inflate_threshold_root;
- else
+ halve_threshold_use = halve_threshold_root;
+ }
+ else {
inflate_threshold_use = inflate_threshold;
+ halve_threshold_use = halve_threshold;
+ }
- err = 0;
- max_resize = 10;
- while ((tn->full_children > 0 && max_resize-- &&
+ max_work = MAX_WORK;
+ while ((tn->full_children > 0 && max_work-- &&
50 * (tn->full_children + tnode_child_length(tn)
- tn->empty_children)
>= inflate_threshold_use * tnode_child_length(tn))) {
@@ -625,35 +631,19 @@
}
}
- if (max_resize < 0) {
- if (!tn->parent)
- pr_warning("Fix inflate_threshold_root."
- " Now=%d size=%d bits\n",
- inflate_threshold_root, tn->bits);
- else
- pr_warning("Fix inflate_threshold."
- " Now=%d size=%d bits\n",
- inflate_threshold, tn->bits);
- }
-
check_tnode(tn);
+ /* Return if at least one inflate is run */
+ if( max_work != MAX_WORK)
+ return (struct node *) tn;
+
/*
* Halve as long as the number of empty children in this
* node is above threshold.
*/
-
- /* Keep root node larger */
-
- if (!tn->parent)
- halve_threshold_use = halve_threshold_root;
- else
- halve_threshold_use = halve_threshold;
-
- err = 0;
- max_resize = 10;
- while (tn->bits > 1 && max_resize-- &&
+ max_work = MAX_WORK;
+ while (tn->bits > 1 && max_work-- &&
100 * (tnode_child_length(tn) - tn->empty_children) <
halve_threshold_use * tnode_child_length(tn)) {
@@ -668,19 +658,10 @@
}
}
- if (max_resize < 0) {
- if (!tn->parent)
- pr_warning("Fix halve_threshold_root."
- " Now=%d size=%d bits\n",
- halve_threshold_root, tn->bits);
- else
- pr_warning("Fix halve_threshold."
- " Now=%d size=%d bits\n",
- halve_threshold, tn->bits);
- }
/* Only one child remains */
- if (tn->empty_children == tnode_child_length(tn) - 1)
+ if (tn->empty_children == tnode_child_length(tn) - 1) {
+one_child:
for (i = 0; i < tnode_child_length(tn); i++) {
struct node *n;
@@ -694,7 +675,7 @@
tnode_free_safe(tn);
return n;
}
-
+ }
return (struct node *) tn;
}
@@ -1435,7 +1416,7 @@
cindex = tkey_extract_bits(mask_pfx(key, current_prefix_length),
pos, bits);
- n = tnode_get_child(pn, cindex);
+ n = tnode_get_child_rcu(pn, cindex);
if (n == NULL) {
#ifdef CONFIG_IP_FIB_TRIE_STATS
@@ -1570,7 +1551,7 @@
if (chopped_off <= pn->bits) {
cindex &= ~(1 << (chopped_off-1));
} else {
- struct tnode *parent = node_parent((struct node *) pn);
+ struct tnode *parent = node_parent_rcu((struct node *) pn);
if (!parent)
goto failed;
@@ -1783,7 +1764,7 @@
static struct leaf *trie_nextleaf(struct leaf *l)
{
struct node *c = (struct node *) l;
- struct tnode *p = node_parent(c);
+ struct tnode *p = node_parent_rcu(c);
if (!p)
return NULL; /* trie with just one leaf */
@@ -2391,7 +2372,7 @@
}
}
-static const char *rtn_type_names[__RTN_MAX] = {
+static const char *const rtn_type_names[__RTN_MAX] = {
[RTN_UNSPEC] = "UNSPEC",
[RTN_UNICAST] = "UNICAST",
[RTN_LOCAL] = "LOCAL",
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 61283f9..13f0781 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -218,8 +218,8 @@
/* We purged the entire slot, anything left? */
if (twdr->tw_count)
need_timer = 1;
+ twdr->slot = ((twdr->slot + 1) & (INET_TWDR_TWKILL_SLOTS - 1));
}
- twdr->slot = ((twdr->slot + 1) & (INET_TWDR_TWKILL_SLOTS - 1));
if (need_timer)
mod_timer(&twdr->tw_timer, jiffies + twdr->period);
out:
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 82c11dd..533afaa 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -662,7 +662,7 @@
return(0);
}
-static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct net_device_stats *stats = &tunnel->dev->stats;
@@ -821,7 +821,7 @@
stats->tx_dropped++;
dev_kfree_skb(skb);
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
if (skb->sk)
skb_set_owner_w(new_skb, skb->sk);
@@ -889,7 +889,7 @@
IPTUNNEL_XMIT();
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
tx_error_icmp:
dst_link_failure(skb);
@@ -898,7 +898,7 @@
stats->tx_errors++;
dev_kfree_skb(skb);
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
static int ipgre_tunnel_bind_dev(struct net_device *dev)
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 7d08210..9fe5d7b 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -813,6 +813,8 @@
inet->cork.addr = ipc->addr;
}
rt = *rtp;
+ if (unlikely(!rt))
+ return -EFAULT;
/*
* We steal reference to this route, caller should not release it
*/
@@ -1302,7 +1304,7 @@
err = ip_local_out(skb);
if (err) {
if (err > 0)
- err = inet->recverr ? net_xmit_errno(err) : 0;
+ err = net_xmit_errno(err);
if (err)
goto error;
}
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 93e2b78..62548cb 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -387,7 +387,7 @@
* and that skb is filled properly by that function.
*/
-static int ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct net_device_stats *stats = &tunnel->dev->stats;
@@ -486,7 +486,7 @@
stats->tx_dropped++;
dev_kfree_skb(skb);
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
if (skb->sk)
skb_set_owner_w(new_skb, skb->sk);
@@ -524,7 +524,7 @@
IPTUNNEL_XMIT();
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
tx_error_icmp:
dst_link_failure(skb);
@@ -532,7 +532,7 @@
stats->tx_errors++;
dev_kfree_skb(skb);
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
static void ipip_tunnel_bind_dev(struct net_device *dev)
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 9a8da5e..65d421c 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -201,7 +201,7 @@
#ifdef CONFIG_IP_PIMSM
-static int reg_vif_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t reg_vif_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net *net = dev_net(dev);
@@ -212,7 +212,7 @@
IGMPMSG_WHOLEPKT);
read_unlock(&mrt_lock);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static const struct net_device_ops reg_vif_netdev_ops = {
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 7505dff..27774c9 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -8,7 +8,7 @@
* Copyright (C) 2002 David S. Miller (davem@redhat.com)
*
*/
-
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
@@ -341,15 +341,11 @@
}
/* All zeroes == unconditional rule. */
-static inline int unconditional(const struct arpt_arp *arp)
+static inline bool unconditional(const struct arpt_arp *arp)
{
- unsigned int i;
+ static const struct arpt_arp uncond;
- for (i = 0; i < sizeof(*arp)/sizeof(__u32); i++)
- if (((__u32 *)arp)[i])
- return 0;
-
- return 1;
+ return memcmp(arp, &uncond, sizeof(uncond)) == 0;
}
/* Figures out from what hook each rule can be called: returns 0 if
@@ -537,12 +533,28 @@
return ret;
}
+static bool check_underflow(struct arpt_entry *e)
+{
+ const struct arpt_entry_target *t;
+ unsigned int verdict;
+
+ if (!unconditional(&e->arp))
+ return false;
+ t = arpt_get_target(e);
+ if (strcmp(t->u.user.name, XT_STANDARD_TARGET) != 0)
+ return false;
+ verdict = ((struct arpt_standard_target *)t)->verdict;
+ verdict = -verdict - 1;
+ return verdict == NF_DROP || verdict == NF_ACCEPT;
+}
+
static inline int check_entry_size_and_hooks(struct arpt_entry *e,
struct xt_table_info *newinfo,
unsigned char *base,
unsigned char *limit,
const unsigned int *hook_entries,
const unsigned int *underflows,
+ unsigned int valid_hooks,
unsigned int *i)
{
unsigned int h;
@@ -562,15 +574,21 @@
/* Check hooks & underflows */
for (h = 0; h < NF_ARP_NUMHOOKS; h++) {
+ if (!(valid_hooks & (1 << h)))
+ continue;
if ((unsigned char *)e - base == hook_entries[h])
newinfo->hook_entry[h] = hook_entries[h];
- if ((unsigned char *)e - base == underflows[h])
+ if ((unsigned char *)e - base == underflows[h]) {
+ if (!check_underflow(e)) {
+ pr_err("Underflows must be unconditional and "
+ "use the STANDARD target with "
+ "ACCEPT/DROP\n");
+ return -EINVAL;
+ }
newinfo->underflow[h] = underflows[h];
+ }
}
- /* FIXME: underflows must be unconditional, standard verdicts
- < 0 (not ARPT_RETURN). --RR */
-
/* Clear counters and comefrom */
e->counters = ((struct xt_counters) { 0, 0 });
e->comefrom = 0;
@@ -630,7 +648,7 @@
newinfo,
entry0,
entry0 + size,
- hook_entries, underflows, &i);
+ hook_entries, underflows, valid_hooks, &i);
duprintf("translate_table: ARPT_ENTRY_ITERATE gives %d\n", ret);
if (ret != 0)
return ret;
@@ -1760,7 +1778,8 @@
return ret;
}
-struct xt_table *arpt_register_table(struct net *net, struct xt_table *table,
+struct xt_table *arpt_register_table(struct net *net,
+ const struct xt_table *table,
const struct arpt_replace *repl)
{
int ret;
diff --git a/net/ipv4/netfilter/arptable_filter.c b/net/ipv4/netfilter/arptable_filter.c
index 6ecfdae..9733760 100644
--- a/net/ipv4/netfilter/arptable_filter.c
+++ b/net/ipv4/netfilter/arptable_filter.c
@@ -15,7 +15,7 @@
#define FILTER_VALID_HOOKS ((1 << NF_ARP_IN) | (1 << NF_ARP_OUT) | \
(1 << NF_ARP_FORWARD))
-static struct
+static const struct
{
struct arpt_replace repl;
struct arpt_standard entries[3];
@@ -45,7 +45,7 @@
.term = ARPT_ERROR_INIT,
};
-static struct xt_table packet_filter = {
+static const struct xt_table packet_filter = {
.name = "filter",
.valid_hooks = FILTER_VALID_HOOKS,
.me = THIS_MODULE,
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index fdefae6..cde755d 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -8,6 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/cache.h>
#include <linux/capability.h>
#include <linux/skbuff.h>
@@ -190,16 +191,11 @@
/* All zeroes == unconditional rule. */
/* Mildly perf critical (only if packet tracing is on) */
-static inline int
-unconditional(const struct ipt_ip *ip)
+static inline bool unconditional(const struct ipt_ip *ip)
{
- unsigned int i;
+ static const struct ipt_ip uncond;
- for (i = 0; i < sizeof(*ip)/sizeof(__u32); i++)
- if (((__u32 *)ip)[i])
- return 0;
-
- return 1;
+ return memcmp(ip, &uncond, sizeof(uncond)) == 0;
#undef FWINV
}
@@ -315,7 +311,6 @@
static const char nulldevname[IFNAMSIZ] __attribute__((aligned(sizeof(long))));
const struct iphdr *ip;
- u_int16_t datalen;
bool hotdrop = false;
/* Initializing verdict to NF_DROP keeps gcc happy. */
unsigned int verdict = NF_DROP;
@@ -328,7 +323,6 @@
/* Initialization */
ip = ip_hdr(skb);
- datalen = skb->len - ip->ihl * 4;
indev = in ? in->name : nulldevname;
outdev = out ? out->name : nulldevname;
/* We handle fragments by dealing with the first fragment as
@@ -427,8 +421,6 @@
#endif
/* Target might have changed stuff. */
ip = ip_hdr(skb);
- datalen = skb->len - ip->ihl * 4;
-
if (verdict == IPT_CONTINUE)
e = ipt_next_entry(e);
else
@@ -716,6 +708,21 @@
return ret;
}
+static bool check_underflow(struct ipt_entry *e)
+{
+ const struct ipt_entry_target *t;
+ unsigned int verdict;
+
+ if (!unconditional(&e->ip))
+ return false;
+ t = ipt_get_target(e);
+ if (strcmp(t->u.user.name, XT_STANDARD_TARGET) != 0)
+ return false;
+ verdict = ((struct ipt_standard_target *)t)->verdict;
+ verdict = -verdict - 1;
+ return verdict == NF_DROP || verdict == NF_ACCEPT;
+}
+
static int
check_entry_size_and_hooks(struct ipt_entry *e,
struct xt_table_info *newinfo,
@@ -723,6 +730,7 @@
unsigned char *limit,
const unsigned int *hook_entries,
const unsigned int *underflows,
+ unsigned int valid_hooks,
unsigned int *i)
{
unsigned int h;
@@ -742,15 +750,21 @@
/* Check hooks & underflows */
for (h = 0; h < NF_INET_NUMHOOKS; h++) {
+ if (!(valid_hooks & (1 << h)))
+ continue;
if ((unsigned char *)e - base == hook_entries[h])
newinfo->hook_entry[h] = hook_entries[h];
- if ((unsigned char *)e - base == underflows[h])
+ if ((unsigned char *)e - base == underflows[h]) {
+ if (!check_underflow(e)) {
+ pr_err("Underflows must be unconditional and "
+ "use the STANDARD target with "
+ "ACCEPT/DROP\n");
+ return -EINVAL;
+ }
newinfo->underflow[h] = underflows[h];
+ }
}
- /* FIXME: underflows must be unconditional, standard verdicts
- < 0 (not IPT_RETURN). --RR */
-
/* Clear counters and comefrom */
e->counters = ((struct xt_counters) { 0, 0 });
e->comefrom = 0;
@@ -813,7 +827,7 @@
newinfo,
entry0,
entry0 + size,
- hook_entries, underflows, &i);
+ hook_entries, underflows, valid_hooks, &i);
if (ret != 0)
return ret;
@@ -2051,7 +2065,8 @@
return ret;
}
-struct xt_table *ipt_register_table(struct net *net, struct xt_table *table,
+struct xt_table *ipt_register_table(struct net *net,
+ const struct xt_table *table,
const struct ipt_replace *repl)
{
int ret;
diff --git a/net/ipv4/netfilter/iptable_filter.c b/net/ipv4/netfilter/iptable_filter.c
index c30a969..df566cb 100644
--- a/net/ipv4/netfilter/iptable_filter.c
+++ b/net/ipv4/netfilter/iptable_filter.c
@@ -53,11 +53,11 @@
.term = IPT_ERROR_INIT, /* ERROR */
};
-static struct xt_table packet_filter = {
+static const struct xt_table packet_filter = {
.name = "filter",
.valid_hooks = FILTER_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET,
+ .af = NFPROTO_IPV4,
};
/* The work comes in here from netfilter.c. */
@@ -102,21 +102,21 @@
{
.hook = ipt_local_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP_PRI_FILTER,
},
{
.hook = ipt_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP_PRI_FILTER,
},
{
.hook = ipt_local_out_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_FILTER,
},
diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c
index 4087614..036047f 100644
--- a/net/ipv4/netfilter/iptable_mangle.c
+++ b/net/ipv4/netfilter/iptable_mangle.c
@@ -28,7 +28,7 @@
(1 << NF_INET_POST_ROUTING))
/* Ouch - five different hooks? Maybe this should be a config option..... -- BC */
-static struct
+static const struct
{
struct ipt_replace repl;
struct ipt_standard entries[5];
@@ -64,11 +64,11 @@
.term = IPT_ERROR_INIT, /* ERROR */
};
-static struct xt_table packet_mangler = {
+static const struct xt_table packet_mangler = {
.name = "mangle",
.valid_hooks = MANGLE_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET,
+ .af = NFPROTO_IPV4,
};
/* The work comes in here from netfilter.c. */
@@ -162,35 +162,35 @@
{
.hook = ipt_pre_routing_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP_PRI_MANGLE,
},
{
.hook = ipt_local_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP_PRI_MANGLE,
},
{
.hook = ipt_forward_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP_PRI_MANGLE,
},
{
.hook = ipt_local_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_MANGLE,
},
{
.hook = ipt_post_routing_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP_PRI_MANGLE,
},
diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c
index e5356da..993edc2 100644
--- a/net/ipv4/netfilter/iptable_raw.c
+++ b/net/ipv4/netfilter/iptable_raw.c
@@ -9,7 +9,7 @@
#define RAW_VALID_HOOKS ((1 << NF_INET_PRE_ROUTING) | (1 << NF_INET_LOCAL_OUT))
-static struct
+static const struct
{
struct ipt_replace repl;
struct ipt_standard entries[2];
@@ -36,11 +36,11 @@
.term = IPT_ERROR_INIT, /* ERROR */
};
-static struct xt_table packet_raw = {
+static const struct xt_table packet_raw = {
.name = "raw",
.valid_hooks = RAW_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET,
+ .af = NFPROTO_IPV4,
};
/* The work comes in here from netfilter.c. */
@@ -74,14 +74,14 @@
static struct nf_hook_ops ipt_ops[] __read_mostly = {
{
.hook = ipt_hook,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP_PRI_RAW,
.owner = THIS_MODULE,
},
{
.hook = ipt_local_hook,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_RAW,
.owner = THIS_MODULE,
diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c
index 29ab630..99eb76c6 100644
--- a/net/ipv4/netfilter/iptable_security.c
+++ b/net/ipv4/netfilter/iptable_security.c
@@ -27,7 +27,7 @@
(1 << NF_INET_FORWARD) | \
(1 << NF_INET_LOCAL_OUT)
-static struct
+static const struct
{
struct ipt_replace repl;
struct ipt_standard entries[3];
@@ -57,11 +57,11 @@
.term = IPT_ERROR_INIT, /* ERROR */
};
-static struct xt_table security_table = {
+static const struct xt_table security_table = {
.name = "security",
.valid_hooks = SECURITY_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET,
+ .af = NFPROTO_IPV4,
};
static unsigned int
@@ -105,21 +105,21 @@
{
.hook = ipt_local_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP_PRI_SECURITY,
},
{
.hook = ipt_forward_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP_PRI_SECURITY,
},
{
.hook = ipt_local_out_hook,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_SECURITY,
},
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index 7d2ead7..aa95bb8 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -26,6 +26,7 @@
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
#include <net/netfilter/nf_nat_helper.h>
#include <net/netfilter/ipv4/nf_defrag_ipv4.h>
+#include <net/netfilter/nf_log.h>
int (*nf_nat_seq_adjust_hook)(struct sk_buff *skb,
struct nf_conn *ct,
@@ -113,8 +114,11 @@
ret = helper->help(skb, skb_network_offset(skb) + ip_hdrlen(skb),
ct, ctinfo);
- if (ret != NF_ACCEPT)
+ if (ret != NF_ACCEPT) {
+ nf_log_packet(NFPROTO_IPV4, hooknum, skb, in, out, NULL,
+ "nf_ct_%s: dropping packet", helper->name);
return ret;
+ }
if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status)) {
typeof(nf_nat_seq_adjust_hook) seq_adjust;
@@ -158,28 +162,28 @@
{
.hook = ipv4_conntrack_in,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP_PRI_CONNTRACK,
},
{
.hook = ipv4_conntrack_local,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_CONNTRACK,
},
{
.hook = ipv4_confirm,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP_PRI_CONNTRACK_CONFIRM,
},
{
.hook = ipv4_confirm,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP_PRI_CONNTRACK_CONFIRM,
},
@@ -256,11 +260,11 @@
tuple.dst.u3.ip = inet->daddr;
tuple.dst.u.tcp.port = inet->dport;
tuple.src.l3num = PF_INET;
- tuple.dst.protonum = IPPROTO_TCP;
+ tuple.dst.protonum = sk->sk_protocol;
- /* We only do TCP at the moment: is there a better way? */
- if (strcmp(sk->sk_prot->name, "TCP")) {
- pr_debug("SO_ORIGINAL_DST: Not a TCP socket\n");
+ /* We only do TCP and SCTP at the moment: is there a better way? */
+ if (sk->sk_protocol != IPPROTO_TCP && sk->sk_protocol != IPPROTO_SCTP) {
+ pr_debug("SO_ORIGINAL_DST: Not a TCP/SCTP socket\n");
return -ENOPROTOOPT;
}
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 3229e0a..68afc6e 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -212,7 +212,7 @@
maxip = ntohl(range->max_ip);
j = jhash_2words((__force u32)tuple->src.u3.ip,
range->flags & IP_NAT_RANGE_PERSISTENT ?
- (__force u32)tuple->dst.u3.ip : 0, 0);
+ 0 : (__force u32)tuple->dst.u3.ip, 0);
j = ((u64)j * (maxip - minip + 1)) >> 32;
*var_ipp = htonl(minip + j);
}
@@ -620,7 +620,7 @@
};
static int
-nfnetlink_parse_nat(struct nlattr *nat,
+nfnetlink_parse_nat(const struct nlattr *nat,
const struct nf_conn *ct, struct nf_nat_range *range)
{
struct nlattr *tb[CTA_NAT_MAX+1];
@@ -656,7 +656,7 @@
static int
nfnetlink_parse_nat_setup(struct nf_conn *ct,
enum nf_nat_manip_type manip,
- struct nlattr *attr)
+ const struct nlattr *attr)
{
struct nf_nat_range range;
@@ -671,7 +671,7 @@
static int
nfnetlink_parse_nat_setup(struct nf_conn *ct,
enum nf_nat_manip_type manip,
- struct nlattr *attr)
+ const struct nlattr *attr)
{
return -EOPNOTSUPP;
}
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index 6348a79..9e81e0d 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -28,7 +28,7 @@
(1 << NF_INET_POST_ROUTING) | \
(1 << NF_INET_LOCAL_OUT))
-static struct
+static const struct
{
struct ipt_replace repl;
struct ipt_standard entries[3];
@@ -58,11 +58,11 @@
.term = IPT_ERROR_INIT, /* ERROR */
};
-static struct xt_table nat_table = {
+static const struct xt_table nat_table = {
.name = "nat",
.valid_hooks = NAT_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET,
+ .af = NFPROTO_IPV4,
};
/* Source NAT */
diff --git a/net/ipv4/netfilter/nf_nat_standalone.c b/net/ipv4/netfilter/nf_nat_standalone.c
index 5567bd0..5f41d01 100644
--- a/net/ipv4/netfilter/nf_nat_standalone.c
+++ b/net/ipv4/netfilter/nf_nat_standalone.c
@@ -251,7 +251,7 @@
{
.hook = nf_nat_in,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP_PRI_NAT_DST,
},
@@ -259,7 +259,7 @@
{
.hook = nf_nat_out,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP_PRI_NAT_SRC,
},
@@ -267,7 +267,7 @@
{
.hook = nf_nat_local_fn,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP_PRI_NAT_DST,
},
@@ -275,7 +275,7 @@
{
.hook = nf_nat_fn,
.owner = THIS_MODULE,
- .pf = PF_INET,
+ .pf = NFPROTO_IPV4,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP_PRI_NAT_SRC,
},
diff --git a/net/ipv4/protocol.c b/net/ipv4/protocol.c
index ea50da0..a2e5fc0 100644
--- a/net/ipv4/protocol.c
+++ b/net/ipv4/protocol.c
@@ -22,26 +22,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
+#include <linux/cache.h>
#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/inet.h>
#include <linux/netdevice.h>
-#include <linux/timer.h>
-#include <net/ip.h>
+#include <linux/spinlock.h>
#include <net/protocol.h>
-#include <linux/skbuff.h>
-#include <net/sock.h>
-#include <net/icmp.h>
-#include <net/udp.h>
-#include <net/ipip.h>
-#include <linux/igmp.h>
struct net_protocol *inet_protos[MAX_INET_PROTOS] ____cacheline_aligned_in_smp;
static DEFINE_SPINLOCK(inet_proto_lock);
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 2979f14..ebb1e58 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -375,7 +375,7 @@
err = NF_HOOK(PF_INET, NF_INET_LOCAL_OUT, skb, NULL, rt->u.dst.dev,
dst_output);
if (err > 0)
- err = inet->recverr ? net_xmit_errno(err) : 0;
+ err = net_xmit_errno(err);
if (err)
goto error;
out:
@@ -386,6 +386,8 @@
kfree_skb(skb);
error:
IP_INC_STATS(net, IPSTATS_MIB_OUTDISCARDS);
+ if (err == -ENOBUFS && !inet->recverr)
+ err = 0;
return err;
}
@@ -576,8 +578,11 @@
&ipc, &rt, msg->msg_flags);
if (err)
ip_flush_pending_frames(sk);
- else if (!(msg->msg_flags & MSG_MORE))
+ else if (!(msg->msg_flags & MSG_MORE)) {
err = ip_push_pending_frames(sk);
+ if (err == -ENOBUFS && !inet->recverr)
+ err = 0;
+ }
release_sock(sk);
}
done:
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 278f46f..91867d3 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1514,13 +1514,17 @@
void ip_rt_send_redirect(struct sk_buff *skb)
{
struct rtable *rt = skb_rtable(skb);
- struct in_device *in_dev = in_dev_get(rt->u.dst.dev);
+ struct in_device *in_dev;
+ int log_martians;
- if (!in_dev)
+ rcu_read_lock();
+ in_dev = __in_dev_get_rcu(rt->u.dst.dev);
+ if (!in_dev || !IN_DEV_TX_REDIRECTS(in_dev)) {
+ rcu_read_unlock();
return;
-
- if (!IN_DEV_TX_REDIRECTS(in_dev))
- goto out;
+ }
+ log_martians = IN_DEV_LOG_MARTIANS(in_dev);
+ rcu_read_unlock();
/* No redirected packets during ip_rt_redirect_silence;
* reset the algorithm.
@@ -1533,7 +1537,7 @@
*/
if (rt->u.dst.rate_tokens >= ip_rt_redirect_number) {
rt->u.dst.rate_last = jiffies;
- goto out;
+ return;
}
/* Check for load limit; set rate_last to the latest sent
@@ -1547,7 +1551,7 @@
rt->u.dst.rate_last = jiffies;
++rt->u.dst.rate_tokens;
#ifdef CONFIG_IP_ROUTE_VERBOSE
- if (IN_DEV_LOG_MARTIANS(in_dev) &&
+ if (log_martians &&
rt->u.dst.rate_tokens == ip_rt_redirect_number &&
net_ratelimit())
printk(KERN_WARNING "host %pI4/if%d ignores redirects for %pI4 to %pI4.\n",
@@ -1555,8 +1559,6 @@
&rt->rt_dst, &rt->rt_gateway);
#endif
}
-out:
- in_dev_put(in_dev);
}
static int ip_error(struct sk_buff *skb)
@@ -3442,7 +3444,7 @@
printk(KERN_ERR "Unable to create route proc files\n");
#ifdef CONFIG_XFRM
xfrm_init();
- xfrm4_init();
+ xfrm4_init(ip_rt_max_size);
#endif
rtnl_register(PF_INET, RTM_GETROUTE, inet_rtm_getroute, NULL);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 9114524..edeea06 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1839,7 +1839,7 @@
/* Unread data was tossed, zap the connection. */
NET_INC_STATS_USER(sock_net(sk), LINUX_MIB_TCPABORTONCLOSE);
tcp_set_state(sk, TCP_CLOSE);
- tcp_send_active_reset(sk, GFP_KERNEL);
+ tcp_send_active_reset(sk, sk->sk_allocation);
} else if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime) {
/* Check zero linger _after_ checking for unread data. */
sk->sk_prot->disconnect(sk, 0);
@@ -2336,13 +2336,13 @@
val = !!(tp->nonagle&TCP_NAGLE_CORK);
break;
case TCP_KEEPIDLE:
- val = (tp->keepalive_time ? : sysctl_tcp_keepalive_time) / HZ;
+ val = keepalive_time_when(tp) / HZ;
break;
case TCP_KEEPINTVL:
- val = (tp->keepalive_intvl ? : sysctl_tcp_keepalive_intvl) / HZ;
+ val = keepalive_intvl_when(tp) / HZ;
break;
case TCP_KEEPCNT:
- val = tp->keepalive_probes ? : sysctl_tcp_keepalive_probes;
+ val = keepalive_probes(tp);
break;
case TCP_SYNCNT:
val = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
@@ -2658,7 +2658,7 @@
EXPORT_SYMBOL(tcp_free_md5sig_pool);
-static struct tcp_md5sig_pool **__tcp_alloc_md5sig_pool(void)
+static struct tcp_md5sig_pool **__tcp_alloc_md5sig_pool(struct sock *sk)
{
int cpu;
struct tcp_md5sig_pool **pool;
@@ -2671,7 +2671,7 @@
struct tcp_md5sig_pool *p;
struct crypto_hash *hash;
- p = kzalloc(sizeof(*p), GFP_KERNEL);
+ p = kzalloc(sizeof(*p), sk->sk_allocation);
if (!p)
goto out_free;
*per_cpu_ptr(pool, cpu) = p;
@@ -2688,7 +2688,7 @@
return NULL;
}
-struct tcp_md5sig_pool **tcp_alloc_md5sig_pool(void)
+struct tcp_md5sig_pool **tcp_alloc_md5sig_pool(struct sock *sk)
{
struct tcp_md5sig_pool **pool;
int alloc = 0;
@@ -2709,7 +2709,7 @@
if (alloc) {
/* we cannot hold spinlock here because this may sleep. */
- struct tcp_md5sig_pool **p = __tcp_alloc_md5sig_pool();
+ struct tcp_md5sig_pool **p = __tcp_alloc_md5sig_pool(sk);
spin_lock_bh(&tcp_md5sig_pool_lock);
if (!p) {
tcp_md5sig_users--;
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index e92beb9..6428b34 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -116,7 +116,7 @@
spin_lock(&tcp_cong_list_lock);
ca = tcp_ca_find(name);
#ifdef CONFIG_MODULES
- if (!ca && capable(CAP_SYS_MODULE)) {
+ if (!ca && capable(CAP_NET_ADMIN)) {
spin_unlock(&tcp_cong_list_lock);
request_module("tcp_%s", name);
@@ -246,7 +246,7 @@
#ifdef CONFIG_MODULES
/* not found attempt to autoload module */
- if (!ca && capable(CAP_SYS_MODULE)) {
+ if (!ca && capable(CAP_NET_ADMIN)) {
rcu_read_unlock();
request_module("tcp_%s", name);
rcu_read_lock();
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 2bdb0da..af6d6fa 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -685,7 +685,7 @@
* is invisible. Actually, Linux-2.4 also generates erratic
* ACKs in some circumstances.
*/
- inet_csk(sk)->icsk_rto = (tp->srtt >> 3) + tp->rttvar;
+ inet_csk(sk)->icsk_rto = __tcp_set_rto(tp);
/* 2. Fixups made earlier cannot be right.
* If we do not estimate RTO correctly without them,
@@ -696,8 +696,7 @@
/* NOTE: clamping at TCP_RTO_MIN is not required, current algo
* guarantees that rto is higher.
*/
- if (inet_csk(sk)->icsk_rto > TCP_RTO_MAX)
- inet_csk(sk)->icsk_rto = TCP_RTO_MAX;
+ tcp_bound_rto(sk);
}
/* Save metrics learned by this TCP session.
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 6d88219..0543561 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -328,26 +328,29 @@
*
*/
-void tcp_v4_err(struct sk_buff *skb, u32 info)
+void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
{
- struct iphdr *iph = (struct iphdr *)skb->data;
- struct tcphdr *th = (struct tcphdr *)(skb->data + (iph->ihl << 2));
+ struct iphdr *iph = (struct iphdr *)icmp_skb->data;
+ struct tcphdr *th = (struct tcphdr *)(icmp_skb->data + (iph->ihl << 2));
+ struct inet_connection_sock *icsk;
struct tcp_sock *tp;
struct inet_sock *inet;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
+ const int type = icmp_hdr(icmp_skb)->type;
+ const int code = icmp_hdr(icmp_skb)->code;
struct sock *sk;
+ struct sk_buff *skb;
__u32 seq;
+ __u32 remaining;
int err;
- struct net *net = dev_net(skb->dev);
+ struct net *net = dev_net(icmp_skb->dev);
- if (skb->len < (iph->ihl << 2) + 8) {
+ if (icmp_skb->len < (iph->ihl << 2) + 8) {
ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
return;
}
sk = inet_lookup(net, &tcp_hashinfo, iph->daddr, th->dest,
- iph->saddr, th->source, inet_iif(skb));
+ iph->saddr, th->source, inet_iif(icmp_skb));
if (!sk) {
ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
return;
@@ -367,6 +370,7 @@
if (sk->sk_state == TCP_CLOSE)
goto out;
+ icsk = inet_csk(sk);
tp = tcp_sk(sk);
seq = ntohl(th->seq);
if (sk->sk_state != TCP_LISTEN &&
@@ -393,6 +397,39 @@
}
err = icmp_err_convert[code].errno;
+ /* check if icmp_skb allows revert of backoff
+ * (see draft-zimmermann-tcp-lcd) */
+ if (code != ICMP_NET_UNREACH && code != ICMP_HOST_UNREACH)
+ break;
+ if (seq != tp->snd_una || !icsk->icsk_retransmits ||
+ !icsk->icsk_backoff)
+ break;
+
+ icsk->icsk_backoff--;
+ inet_csk(sk)->icsk_rto = __tcp_set_rto(tp) <<
+ icsk->icsk_backoff;
+ tcp_bound_rto(sk);
+
+ skb = tcp_write_queue_head(sk);
+ BUG_ON(!skb);
+
+ remaining = icsk->icsk_rto - min(icsk->icsk_rto,
+ tcp_time_stamp - TCP_SKB_CB(skb)->when);
+
+ if (remaining) {
+ inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
+ remaining, TCP_RTO_MAX);
+ } else if (sock_owned_by_user(sk)) {
+ /* RTO revert clocked out retransmission,
+ * but socket is locked. Will defer. */
+ inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
+ HZ/20, TCP_RTO_MAX);
+ } else {
+ /* RTO revert clocked out retransmission.
+ * Will retransmit now */
+ tcp_retransmit_timer(sk);
+ }
+
break;
case ICMP_TIME_EXCEEDED:
err = EHOSTUNREACH;
@@ -849,7 +886,7 @@
}
sk->sk_route_caps &= ~NETIF_F_GSO_MASK;
}
- if (tcp_alloc_md5sig_pool() == NULL) {
+ if (tcp_alloc_md5sig_pool(sk) == NULL) {
kfree(newkey);
return -ENOMEM;
}
@@ -970,8 +1007,9 @@
if (!tcp_sk(sk)->md5sig_info) {
struct tcp_sock *tp = tcp_sk(sk);
- struct tcp_md5sig_info *p = kzalloc(sizeof(*p), GFP_KERNEL);
+ struct tcp_md5sig_info *p;
+ p = kzalloc(sizeof(*p), sk->sk_allocation);
if (!p)
return -EINVAL;
@@ -979,7 +1017,7 @@
sk->sk_route_caps &= ~NETIF_F_GSO_MASK;
}
- newkey = kmemdup(cmd.tcpm_key, cmd.tcpm_keylen, GFP_KERNEL);
+ newkey = kmemdup(cmd.tcpm_key, cmd.tcpm_keylen, sk->sk_allocation);
if (!newkey)
return -ENOMEM;
return tcp_v4_md5_do_add(sk, sin->sin_addr.s_addr,
@@ -1158,7 +1196,7 @@
};
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
+static const struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
.md5_lookup = tcp_v4_reqsk_md5_lookup,
.calc_md5_hash = tcp_v4_md5_hash_skb,
};
@@ -1717,7 +1755,7 @@
return 0;
}
-struct inet_connection_sock_af_ops ipv4_specific = {
+const struct inet_connection_sock_af_ops ipv4_specific = {
.queue_xmit = ip_queue_xmit,
.send_check = tcp_v4_send_check,
.rebuild_header = inet_sk_rebuild_header,
@@ -1737,7 +1775,7 @@
};
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_sock_af_ops tcp_sock_ipv4_specific = {
+static const struct tcp_sock_af_ops tcp_sock_ipv4_specific = {
.md5_lookup = tcp_v4_md5_lookup,
.calc_md5_hash = tcp_v4_md5_hash_skb,
.md5_add = tcp_v4_md5_add_func,
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index f8d67cc..e48c37d 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -322,7 +322,7 @@
if (key != NULL) {
memcpy(&tcptw->tw_md5_key, key->key, key->keylen);
tcptw->tw_md5_keylen = key->keylen;
- if (tcp_alloc_md5sig_pool() == NULL)
+ if (tcp_alloc_md5sig_pool(sk) == NULL)
BUG();
}
} while (0);
@@ -657,29 +657,6 @@
child = inet_csk(sk)->icsk_af_ops->syn_recv_sock(sk, skb, req, NULL);
if (child == NULL)
goto listen_overflow;
-#ifdef CONFIG_TCP_MD5SIG
- else {
- /* Copy over the MD5 key from the original socket */
- struct tcp_md5sig_key *key;
- struct tcp_sock *tp = tcp_sk(sk);
- key = tp->af_specific->md5_lookup(sk, child);
- if (key != NULL) {
- /*
- * We're using one, so create a matching key on the
- * newsk structure. If we fail to get memory then we
- * end up not copying the key across. Shucks.
- */
- char *newkey = kmemdup(key->key, key->keylen,
- GFP_ATOMIC);
- if (newkey) {
- if (!tcp_alloc_md5sig_pool())
- BUG();
- tp->af_specific->md5_add(child, child, newkey,
- key->keylen);
- }
- }
- }
-#endif
inet_csk_reqsk_queue_unlink(sk, req, prev);
inet_csk_reqsk_queue_removed(sk, req);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index bd62712..5200aab 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -59,6 +59,7 @@
/* By default, RFC2861 behavior. */
int sysctl_tcp_slow_start_after_idle __read_mostly = 1;
+/* Account for new data that has been sent to the network. */
static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -142,6 +143,7 @@
tp->snd_cwnd_used = 0;
}
+/* Congestion state accounting after a packet has been sent. */
static void tcp_event_data_sent(struct tcp_sock *tp,
struct sk_buff *skb, struct sock *sk)
{
@@ -161,6 +163,7 @@
icsk->icsk_ack.pingpong = 1;
}
+/* Account for an ACK we sent. */
static inline void tcp_event_ack_sent(struct sock *sk, unsigned int pkts)
{
tcp_dec_quickack_mode(sk, pkts);
@@ -276,6 +279,7 @@
return new_win;
}
+/* Packet ECN state for a SYN-ACK */
static inline void TCP_ECN_send_synack(struct tcp_sock *tp, struct sk_buff *skb)
{
TCP_SKB_CB(skb)->flags &= ~TCPCB_FLAG_CWR;
@@ -283,6 +287,7 @@
TCP_SKB_CB(skb)->flags &= ~TCPCB_FLAG_ECE;
}
+/* Packet ECN state for a SYN. */
static inline void TCP_ECN_send_syn(struct sock *sk, struct sk_buff *skb)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -301,6 +306,9 @@
th->ece = 1;
}
+/* Set up ECN state for a packet on a ESTABLISHED socket that is about to
+ * be sent.
+ */
static inline void TCP_ECN_send(struct sock *sk, struct sk_buff *skb,
int tcp_header_len)
{
@@ -362,7 +370,9 @@
__u32 tsval, tsecr; /* need to include OPTION_TS */
};
-/* Beware: Something in the Internet is very sensitive to the ordering of
+/* Write previously computed TCP options to the packet.
+ *
+ * Beware: Something in the Internet is very sensitive to the ordering of
* TCP options, we learned this through the hard way, so be careful here.
* Luckily we can at least blame others for their non-compliance but from
* inter-operatibility perspective it seems that we're somewhat stuck with
@@ -445,6 +455,9 @@
}
}
+/* Compute TCP options for SYN packets. This is not the final
+ * network wire format yet.
+ */
static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb,
struct tcp_out_options *opts,
struct tcp_md5sig_key **md5) {
@@ -493,6 +506,7 @@
return size;
}
+/* Set up TCP options for SYN-ACKs. */
static unsigned tcp_synack_options(struct sock *sk,
struct request_sock *req,
unsigned mss, struct sk_buff *skb,
@@ -541,6 +555,9 @@
return size;
}
+/* Compute TCP options for ESTABLISHED sockets. This is not the
+ * final wire format yet.
+ */
static unsigned tcp_established_options(struct sock *sk, struct sk_buff *skb,
struct tcp_out_options *opts,
struct tcp_md5sig_key **md5) {
@@ -705,7 +722,7 @@
return net_xmit_eval(err);
}
-/* This routine just queue's the buffer
+/* This routine just queues the buffer for sending.
*
* NOTE: probe0 timer is not checked, do not forget tcp_push_pending_frames,
* otherwise socket can stall.
@@ -722,6 +739,7 @@
sk_mem_charge(sk, skb->truesize);
}
+/* Initialize TSO segments for a packet. */
static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb,
unsigned int mss_now)
{
@@ -909,6 +927,7 @@
skb->len = skb->data_len;
}
+/* Remove acked data from a packet in the transmit queue. */
int tcp_trim_head(struct sock *sk, struct sk_buff *skb, u32 len)
{
if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
@@ -937,7 +956,7 @@
return 0;
}
-/* Not accounting for SACKs here. */
+/* Calculate MSS. Not accounting for SACKs here. */
int tcp_mtu_to_mss(struct sock *sk, int pmtu)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -981,6 +1000,7 @@
return mtu;
}
+/* MTU probing init per socket */
void tcp_mtup_init(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -1143,7 +1163,8 @@
return 0;
}
-/* This must be invoked the first time we consider transmitting
+/* Intialize TSO state of a skb.
+ * This must be invoked the first time we consider transmitting
* SKB onto the wire.
*/
static int tcp_init_tso_segs(struct sock *sk, struct sk_buff *skb,
@@ -1158,6 +1179,7 @@
return tso_segs;
}
+/* Minshall's variant of the Nagle send check. */
static inline int tcp_minshall_check(const struct tcp_sock *tp)
{
return after(tp->snd_sml, tp->snd_una) &&
@@ -1242,6 +1264,7 @@
return cwnd_quota;
}
+/* Test if sending is allowed right now. */
int tcp_may_send_now(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -1378,6 +1401,10 @@
}
/* Create a new MTU probe if we are ready.
+ * MTU probe is regularly attempting to increase the path MTU by
+ * deliberately sending larger packets. This discovers routing
+ * changes resulting in larger path MTUs.
+ *
* Returns 0 if we should wait to probe (no cwnd available),
* 1 if a probe was sent,
* -1 otherwise
@@ -1790,6 +1817,7 @@
sk_wmem_free_skb(sk, next_skb);
}
+/* Check if coalescing SKBs is legal. */
static int tcp_can_collapse(struct sock *sk, struct sk_buff *skb)
{
if (tcp_skb_pcount(skb) > 1)
@@ -1808,6 +1836,9 @@
return 1;
}
+/* Collapse packets in the retransmit queue to make to create
+ * less packets on the wire. This is only done on retransmission.
+ */
static void tcp_retrans_try_collapse(struct sock *sk, struct sk_buff *to,
int space)
{
@@ -1957,6 +1988,9 @@
return err;
}
+/* Check if we forward retransmits are possible in the current
+ * window/congestion state.
+ */
static int tcp_can_forward_retransmit(struct sock *sk)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
@@ -2101,7 +2135,8 @@
} else {
/* Socket is locked, keep trying until memory is available. */
for (;;) {
- skb = alloc_skb_fclone(MAX_TCP_HEADER, GFP_KERNEL);
+ skb = alloc_skb_fclone(MAX_TCP_HEADER,
+ sk->sk_allocation);
if (skb)
break;
yield();
@@ -2145,7 +2180,8 @@
TCP_INC_STATS(sock_net(sk), TCP_MIB_OUTRSTS);
}
-/* WARNING: This routine must only be called when we have already sent
+/* Send a crossed SYN-ACK during socket establishment.
+ * WARNING: This routine must only be called when we have already sent
* a SYN packet that crossed the incoming SYN that caused this routine
* to get called. If this assumption fails then the initial rcv_wnd
* and rcv_wscale values will not be correct.
@@ -2180,9 +2216,7 @@
return tcp_transmit_skb(sk, skb, 1, GFP_ATOMIC);
}
-/*
- * Prepare a SYN-ACK.
- */
+/* Prepare a SYN-ACK. */
struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
struct request_sock *req)
{
@@ -2269,9 +2303,7 @@
return skb;
}
-/*
- * Do all connect socket setups that can be done AF independent.
- */
+/* Do all connect socket setups that can be done AF independent. */
static void tcp_connect_init(struct sock *sk)
{
struct dst_entry *dst = __sk_dst_get(sk);
@@ -2330,9 +2362,7 @@
tcp_clear_retrans(tp);
}
-/*
- * Build a SYN and send it off.
- */
+/* Build a SYN and send it off. */
int tcp_connect(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -2359,7 +2389,7 @@
sk->sk_wmem_queued += buff->truesize;
sk_mem_charge(sk, buff->truesize);
tp->packets_out += tcp_skb_pcount(buff);
- tcp_transmit_skb(sk, buff, 1, GFP_KERNEL);
+ tcp_transmit_skb(sk, buff, 1, sk->sk_allocation);
/* We change tp->snd_nxt after the tcp_transmit_skb() call
* in order to make this packet get counted in tcpOutSegs.
@@ -2493,6 +2523,7 @@
return tcp_transmit_skb(sk, skb, 0, GFP_ATOMIC);
}
+/* Initiate keepalive or window probe from timer. */
int tcp_write_wakeup(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index b144a26..cdb2ca7 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -137,13 +137,14 @@
{
struct inet_connection_sock *icsk = inet_csk(sk);
int retry_until;
+ bool do_reset;
if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
if (icsk->icsk_retransmits)
dst_negative_advice(&sk->sk_dst_cache);
retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
} else {
- if (icsk->icsk_retransmits >= sysctl_tcp_retries1) {
+ if (retransmits_timed_out(sk, sysctl_tcp_retries1)) {
/* Black hole detection */
tcp_mtu_probing(icsk, sk);
@@ -155,13 +156,15 @@
const int alive = (icsk->icsk_rto < TCP_RTO_MAX);
retry_until = tcp_orphan_retries(sk, alive);
+ do_reset = alive ||
+ !retransmits_timed_out(sk, retry_until);
- if (tcp_out_of_resources(sk, alive || icsk->icsk_retransmits < retry_until))
+ if (tcp_out_of_resources(sk, do_reset))
return 1;
}
}
- if (icsk->icsk_retransmits >= retry_until) {
+ if (retransmits_timed_out(sk, retry_until)) {
/* Has it gone just too far? */
tcp_write_err(sk);
return 1;
@@ -279,7 +282,7 @@
* The TCP retransmit timer.
*/
-static void tcp_retransmit_timer(struct sock *sk)
+void tcp_retransmit_timer(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
@@ -385,7 +388,7 @@
out_reset_timer:
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, TCP_RTO_MAX);
- if (icsk->icsk_retransmits > sysctl_tcp_retries1)
+ if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1))
__sk_dst_reset(sk);
out:;
@@ -499,8 +502,7 @@
elapsed = tcp_time_stamp - tp->rcv_tstamp;
if (elapsed >= keepalive_time_when(tp)) {
- if ((!tp->keepalive_probes && icsk->icsk_probes_out >= sysctl_tcp_keepalive_probes) ||
- (tp->keepalive_probes && icsk->icsk_probes_out >= tp->keepalive_probes)) {
+ if (icsk->icsk_probes_out >= keepalive_probes(tp)) {
tcp_send_active_reset(sk, GFP_ATOMIC);
tcp_write_err(sk);
goto out;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 80e3812..ebaaa7f 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -110,11 +110,12 @@
EXPORT_SYMBOL(udp_table);
int sysctl_udp_mem[3] __read_mostly;
-int sysctl_udp_rmem_min __read_mostly;
-int sysctl_udp_wmem_min __read_mostly;
-
EXPORT_SYMBOL(sysctl_udp_mem);
+
+int sysctl_udp_rmem_min __read_mostly;
EXPORT_SYMBOL(sysctl_udp_rmem_min);
+
+int sysctl_udp_wmem_min __read_mostly;
EXPORT_SYMBOL(sysctl_udp_wmem_min);
atomic_t udp_memory_allocated;
@@ -158,7 +159,7 @@
*/
int udp_lib_get_port(struct sock *sk, unsigned short snum,
int (*saddr_comp)(const struct sock *sk1,
- const struct sock *sk2 ) )
+ const struct sock *sk2))
{
struct udp_hslot *hslot;
struct udp_table *udptable = sk->sk_prot->h.udp_table;
@@ -221,14 +222,15 @@
fail:
return error;
}
+EXPORT_SYMBOL(udp_lib_get_port);
static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
{
struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
- return ( !ipv6_only_sock(sk2) &&
- (!inet1->rcv_saddr || !inet2->rcv_saddr ||
- inet1->rcv_saddr == inet2->rcv_saddr ));
+ return (!ipv6_only_sock(sk2) &&
+ (!inet1->rcv_saddr || !inet2->rcv_saddr ||
+ inet1->rcv_saddr == inet2->rcv_saddr));
}
int udp_v4_get_port(struct sock *sk, unsigned short snum)
@@ -383,8 +385,8 @@
void __udp4_lib_err(struct sk_buff *skb, u32 info, struct udp_table *udptable)
{
struct inet_sock *inet;
- struct iphdr *iph = (struct iphdr*)skb->data;
- struct udphdr *uh = (struct udphdr*)(skb->data+(iph->ihl<<2));
+ struct iphdr *iph = (struct iphdr *)skb->data;
+ struct udphdr *uh = (struct udphdr *)(skb->data+(iph->ihl<<2));
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct sock *sk;
@@ -439,7 +441,7 @@
if (!harderr || sk->sk_state != TCP_ESTABLISHED)
goto out;
} else {
- ip_icmp_error(sk, skb, err, uh->dest, info, (u8*)(uh+1));
+ ip_icmp_error(sk, skb, err, uh->dest, info, (u8 *)(uh+1));
}
sk->sk_err = err;
sk->sk_error_report(sk);
@@ -474,7 +476,7 @@
* (checksum field must be zeroed out)
*/
static void udp4_hwcsum_outgoing(struct sock *sk, struct sk_buff *skb,
- __be32 src, __be32 dst, int len )
+ __be32 src, __be32 dst, int len)
{
unsigned int offset;
struct udphdr *uh = udp_hdr(skb);
@@ -545,7 +547,7 @@
} else if (skb->ip_summed == CHECKSUM_PARTIAL) { /* UDP hardware csum */
- udp4_hwcsum_outgoing(sk, skb, fl->fl4_src,fl->fl4_dst, up->len);
+ udp4_hwcsum_outgoing(sk, skb, fl->fl4_src, fl->fl4_dst, up->len);
goto send;
} else /* `normal' UDP */
@@ -553,18 +555,24 @@
/* add protocol-dependent pseudo-header */
uh->check = csum_tcpudp_magic(fl->fl4_src, fl->fl4_dst, up->len,
- sk->sk_protocol, csum );
+ sk->sk_protocol, csum);
if (uh->check == 0)
uh->check = CSUM_MANGLED_0;
send:
err = ip_push_pending_frames(sk);
+ if (err) {
+ if (err == -ENOBUFS && !inet->recverr) {
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_SNDBUFERRORS, is_udplite);
+ err = 0;
+ }
+ } else
+ UDP_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_OUTDATAGRAMS, is_udplite);
out:
up->len = 0;
up->pending = 0;
- if (!err)
- UDP_INC_STATS_USER(sock_net(sk),
- UDP_MIB_OUTDATAGRAMS, is_udplite);
return err;
}
@@ -592,7 +600,7 @@
* Check the flags.
*/
- if (msg->msg_flags&MSG_OOB) /* Mirror BSD error message compatibility */
+ if (msg->msg_flags & MSG_OOB) /* Mirror BSD error message compatibility */
return -EOPNOTSUPP;
ipc.opt = NULL;
@@ -619,7 +627,7 @@
* Get and verify the address.
*/
if (msg->msg_name) {
- struct sockaddr_in * usin = (struct sockaddr_in*)msg->msg_name;
+ struct sockaddr_in * usin = (struct sockaddr_in *)msg->msg_name;
if (msg->msg_namelen < sizeof(*usin))
return -EINVAL;
if (usin->sin_family != AF_INET) {
@@ -684,7 +692,7 @@
}
if (connected)
- rt = (struct rtable*)sk_dst_check(sk, 0);
+ rt = (struct rtable *)sk_dst_check(sk, 0);
if (rt == NULL) {
struct flowi fl = { .oif = ipc.oif,
@@ -782,6 +790,7 @@
err = 0;
goto out;
}
+EXPORT_SYMBOL(udp_sendmsg);
int udp_sendpage(struct sock *sk, struct page *page, int offset,
size_t size, int flags)
@@ -871,6 +880,7 @@
return 0;
}
+EXPORT_SYMBOL(udp_ioctl);
/*
* This should be easy, if there is something there we
@@ -892,7 +902,7 @@
* Check any passed addresses
*/
if (addr_len)
- *addr_len=sizeof(*sin);
+ *addr_len = sizeof(*sin);
if (flags & MSG_ERRQUEUE)
return ip_recv_error(sk, msg, len);
@@ -923,9 +933,11 @@
if (skb_csum_unnecessary(skb))
err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr),
- msg->msg_iov, copied );
+ msg->msg_iov, copied);
else {
- err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov);
+ err = skb_copy_and_csum_datagram_iovec(skb,
+ sizeof(struct udphdr),
+ msg->msg_iov);
if (err == -EINVAL)
goto csum_copy_err;
@@ -941,8 +953,7 @@
sock_recv_timestamp(msg, sk, skb);
/* Copy the address. */
- if (sin)
- {
+ if (sin) {
sin->sin_family = AF_INET;
sin->sin_port = udp_hdr(skb)->source;
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
@@ -995,6 +1006,7 @@
sk_dst_reset(sk);
return 0;
}
+EXPORT_SYMBOL(udp_disconnect);
void udp_lib_unhash(struct sock *sk)
{
@@ -1044,7 +1056,7 @@
* Note that in the success and error cases, the skb is assumed to
* have either been requeued or freed.
*/
-int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
+int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
struct udp_sock *up = udp_sk(sk);
int rc;
@@ -1214,7 +1226,7 @@
if (uh->check == 0) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else if (skb->ip_summed == CHECKSUM_COMPLETE) {
- if (!csum_tcpudp_magic(iph->saddr, iph->daddr, skb->len,
+ if (!csum_tcpudp_magic(iph->saddr, iph->daddr, skb->len,
proto, skb->csum))
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
@@ -1355,7 +1367,7 @@
int err = 0;
int is_udplite = IS_UDPLITE(sk);
- if (optlen<sizeof(int))
+ if (optlen < sizeof(int))
return -EINVAL;
if (get_user(val, (int __user *)optval))
@@ -1426,6 +1438,7 @@
return err;
}
+EXPORT_SYMBOL(udp_lib_setsockopt);
int udp_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, int optlen)
@@ -1453,7 +1466,7 @@
struct udp_sock *up = udp_sk(sk);
int val, len;
- if (get_user(len,optlen))
+ if (get_user(len, optlen))
return -EFAULT;
len = min_t(unsigned int, len, sizeof(int));
@@ -1486,10 +1499,11 @@
if (put_user(len, optlen))
return -EFAULT;
- if (copy_to_user(optval, &val,len))
+ if (copy_to_user(optval, &val, len))
return -EFAULT;
return 0;
}
+EXPORT_SYMBOL(udp_lib_getsockopt);
int udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
@@ -1528,9 +1542,9 @@
int is_lite = IS_UDPLITE(sk);
/* Check for false positives due to checksum errors */
- if ( (mask & POLLRDNORM) &&
- !(file->f_flags & O_NONBLOCK) &&
- !(sk->sk_shutdown & RCV_SHUTDOWN)){
+ if ((mask & POLLRDNORM) &&
+ !(file->f_flags & O_NONBLOCK) &&
+ !(sk->sk_shutdown & RCV_SHUTDOWN)) {
struct sk_buff_head *rcvq = &sk->sk_receive_queue;
struct sk_buff *skb;
@@ -1552,6 +1566,7 @@
return mask;
}
+EXPORT_SYMBOL(udp_poll);
struct proto udp_prot = {
.name = "UDP",
@@ -1582,6 +1597,7 @@
.compat_getsockopt = compat_udp_getsockopt,
#endif
};
+EXPORT_SYMBOL(udp_prot);
/* ------------------------------------------------------------------------ */
#ifdef CONFIG_PROC_FS
@@ -1703,11 +1719,13 @@
rc = -ENOMEM;
return rc;
}
+EXPORT_SYMBOL(udp_proc_register);
void udp_proc_unregister(struct net *net, struct udp_seq_afinfo *afinfo)
{
proc_net_remove(net, afinfo->name);
}
+EXPORT_SYMBOL(udp_proc_unregister);
/* ------------------------------------------------------------------------ */
static void udp4_format_sock(struct sock *sp, struct seq_file *f,
@@ -1741,7 +1759,7 @@
int len;
udp4_format_sock(v, seq, state->bucket, &len);
- seq_printf(seq, "%*s\n", 127 - len ,"");
+ seq_printf(seq, "%*s\n", 127 - len, "");
}
return 0;
}
@@ -1816,16 +1834,64 @@
sysctl_udp_wmem_min = SK_MEM_QUANTUM;
}
-EXPORT_SYMBOL(udp_disconnect);
-EXPORT_SYMBOL(udp_ioctl);
-EXPORT_SYMBOL(udp_prot);
-EXPORT_SYMBOL(udp_sendmsg);
-EXPORT_SYMBOL(udp_lib_getsockopt);
-EXPORT_SYMBOL(udp_lib_setsockopt);
-EXPORT_SYMBOL(udp_poll);
-EXPORT_SYMBOL(udp_lib_get_port);
+int udp4_ufo_send_check(struct sk_buff *skb)
+{
+ const struct iphdr *iph;
+ struct udphdr *uh;
-#ifdef CONFIG_PROC_FS
-EXPORT_SYMBOL(udp_proc_register);
-EXPORT_SYMBOL(udp_proc_unregister);
-#endif
+ if (!pskb_may_pull(skb, sizeof(*uh)))
+ return -EINVAL;
+
+ iph = ip_hdr(skb);
+ uh = udp_hdr(skb);
+
+ uh->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, skb->len,
+ IPPROTO_UDP, 0);
+ skb->csum_start = skb_transport_header(skb) - skb->head;
+ skb->csum_offset = offsetof(struct udphdr, check);
+ skb->ip_summed = CHECKSUM_PARTIAL;
+ return 0;
+}
+
+struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb, int features)
+{
+ struct sk_buff *segs = ERR_PTR(-EINVAL);
+ unsigned int mss;
+ int offset;
+ __wsum csum;
+
+ mss = skb_shinfo(skb)->gso_size;
+ if (unlikely(skb->len <= mss))
+ goto out;
+
+ if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
+ /* Packet is from an untrusted source, reset gso_segs. */
+ int type = skb_shinfo(skb)->gso_type;
+
+ if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY) ||
+ !(type & (SKB_GSO_UDP))))
+ goto out;
+
+ skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
+
+ segs = NULL;
+ goto out;
+ }
+
+ /* Do software UFO. Complete and fill in the UDP checksum as HW cannot
+ * do checksum of UDP packets sent as multiple IP fragments.
+ */
+ offset = skb->csum_start - skb_headroom(skb);
+ csum = skb_checksum(skb, offset, skb->len - offset, 0);
+ offset += skb->csum_offset;
+ *(__sum16 *)(skb->data + offset) = csum_fold(csum);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Fragment the skb. IP headers of the fragments are updated in
+ * inet_gso_segment()
+ */
+ segs = skb_segment(skb, features);
+out:
+ return segs;
+}
+
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 0071ee6..74fb2eb 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -264,6 +264,22 @@
.fill_dst = xfrm4_fill_dst,
};
+#ifdef CONFIG_SYSCTL
+static struct ctl_table xfrm4_policy_table[] = {
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "xfrm4_gc_thresh",
+ .data = &xfrm4_dst_ops.gc_thresh,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+ { }
+};
+
+static struct ctl_table_header *sysctl_hdr;
+#endif
+
static void __init xfrm4_policy_init(void)
{
xfrm_policy_register_afinfo(&xfrm4_policy_afinfo);
@@ -271,12 +287,31 @@
static void __exit xfrm4_policy_fini(void)
{
+#ifdef CONFIG_SYSCTL
+ if (sysctl_hdr)
+ unregister_net_sysctl_table(sysctl_hdr);
+#endif
xfrm_policy_unregister_afinfo(&xfrm4_policy_afinfo);
}
-void __init xfrm4_init(void)
+void __init xfrm4_init(int rt_max_size)
{
xfrm4_state_init();
xfrm4_policy_init();
+ /*
+ * Select a default value for the gc_thresh based on the main route
+ * table hash size. It seems to me the worst case scenario is when
+ * we have ipsec operating in transport mode, in which we create a
+ * dst_entry per socket. The xfrm gc algorithm starts trying to remove
+ * entries at gc_thresh, and prevents new allocations as 2*gc_thresh
+ * so lets set an initial xfrm gc_thresh value at the rt_max_size/2.
+ * That will let us store an ipsec connection per route table entry,
+ * and start cleaning when were 1/2 full
+ */
+ xfrm4_dst_ops.gc_thresh = rt_max_size/2;
+#ifdef CONFIG_SYSCTL
+ sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv4_ctl_path,
+ xfrm4_policy_table);
+#endif
}
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 43b3c9f..c9b3690 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1371,12 +1371,14 @@
/* Gets referenced address, destroys ifaddr */
-static void addrconf_dad_stop(struct inet6_ifaddr *ifp)
+static void addrconf_dad_stop(struct inet6_ifaddr *ifp, int dad_failed)
{
if (ifp->flags&IFA_F_PERMANENT) {
spin_lock_bh(&ifp->lock);
addrconf_del_timer(ifp);
ifp->flags |= IFA_F_TENTATIVE;
+ if (dad_failed)
+ ifp->flags |= IFA_F_DADFAILED;
spin_unlock_bh(&ifp->lock);
in6_ifa_put(ifp);
#ifdef CONFIG_IPV6_PRIVACY
@@ -1422,7 +1424,7 @@
}
}
- addrconf_dad_stop(ifp);
+ addrconf_dad_stop(ifp, 1);
}
/* Join to solicited addr multicast group. */
@@ -2778,7 +2780,7 @@
idev->cnf.accept_dad < 1 ||
!(ifp->flags&IFA_F_TENTATIVE) ||
ifp->flags & IFA_F_NODAD) {
- ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC);
+ ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC|IFA_F_DADFAILED);
spin_unlock_bh(&ifp->lock);
read_unlock_bh(&idev->lock);
@@ -2795,7 +2797,7 @@
* - otherwise, kill it.
*/
in6_ifa_hold(ifp);
- addrconf_dad_stop(ifp);
+ addrconf_dad_stop(ifp, 0);
return;
}
@@ -2829,7 +2831,7 @@
* DAD was successful
*/
- ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC);
+ ifp->flags &= ~(IFA_F_TENTATIVE|IFA_F_OPTIMISTIC|IFA_F_DADFAILED);
spin_unlock_bh(&ifp->lock);
read_unlock_bh(&idev->lock);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index caa0278..a123a32 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -306,8 +306,10 @@
v4addr != htonl(INADDR_ANY) &&
chk_addr_ret != RTN_LOCAL &&
chk_addr_ret != RTN_MULTICAST &&
- chk_addr_ret != RTN_BROADCAST)
+ chk_addr_ret != RTN_BROADCAST) {
+ err = -EADDRNOTAVAIL;
goto out;
+ }
} else {
if (addr_type != IPV6_ADDR_ANY) {
struct net_device *dev = NULL;
@@ -772,6 +774,11 @@
struct sk_buff *segs = ERR_PTR(-EINVAL);
struct ipv6hdr *ipv6h;
struct inet6_protocol *ops;
+ int proto;
+ struct frag_hdr *fptr;
+ unsigned int unfrag_ip6hlen;
+ u8 *prevhdr;
+ int offset = 0;
if (!(features & NETIF_F_V6_CSUM))
features &= ~NETIF_F_SG;
@@ -791,10 +798,9 @@
__skb_pull(skb, sizeof(*ipv6h));
segs = ERR_PTR(-EPROTONOSUPPORT);
+ proto = ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr);
rcu_read_lock();
- ops = rcu_dereference(inet6_protos[
- ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr)]);
-
+ ops = rcu_dereference(inet6_protos[proto]);
if (likely(ops && ops->gso_segment)) {
skb_reset_transport_header(skb);
segs = ops->gso_segment(skb, features);
@@ -808,6 +814,16 @@
ipv6h = ipv6_hdr(skb);
ipv6h->payload_len = htons(skb->len - skb->mac_len -
sizeof(*ipv6h));
+ if (proto == IPPROTO_UDP) {
+ unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+ fptr = (struct frag_hdr *)(skb_network_header(skb) +
+ unfrag_ip6hlen);
+ fptr->frag_off = htons(offset);
+ if (skb->next != NULL)
+ fptr->frag_off |= htons(IP6_MF);
+ offset += (ntohs(ipv6h->payload_len) -
+ sizeof(struct frag_hdr));
+ }
}
out:
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index eab62a7..e2325f6 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -323,7 +323,7 @@
int iif = 0;
int addr_type = 0;
int len;
- int hlimit, tclass;
+ int hlimit;
int err = 0;
if ((u8 *)hdr < skb->head ||
@@ -469,10 +469,6 @@
if (hlimit < 0)
hlimit = ip6_dst_hoplimit(dst);
- tclass = np->tclass;
- if (tclass < 0)
- tclass = 0;
-
msg.skb = skb;
msg.offset = skb_network_offset(skb);
msg.type = type;
@@ -488,8 +484,8 @@
err = ip6_append_data(sk, icmpv6_getfrag, &msg,
len + sizeof(struct icmp6hdr),
- sizeof(struct icmp6hdr),
- hlimit, tclass, NULL, &fl, (struct rt6_info*)dst,
+ sizeof(struct icmp6hdr), hlimit,
+ np->tclass, NULL, &fl, (struct rt6_info*)dst,
MSG_DONTWAIT);
if (err) {
ip6_flush_pending_frames(sk);
@@ -522,7 +518,6 @@
struct dst_entry *dst;
int err = 0;
int hlimit;
- int tclass;
saddr = &ipv6_hdr(skb)->daddr;
@@ -562,10 +557,6 @@
if (hlimit < 0)
hlimit = ip6_dst_hoplimit(dst);
- tclass = np->tclass;
- if (tclass < 0)
- tclass = 0;
-
idev = in6_dev_get(skb->dev);
msg.skb = skb;
@@ -573,7 +564,7 @@
msg.type = ICMPV6_ECHO_REPLY;
err = ip6_append_data(sk, icmpv6_getfrag, &msg, skb->len + sizeof(struct icmp6hdr),
- sizeof(struct icmp6hdr), hlimit, tclass, NULL, &fl,
+ sizeof(struct icmp6hdr), hlimit, np->tclass, NULL, &fl,
(struct rt6_info*)dst, MSG_DONTWAIT);
if (err) {
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 52ee1dc..0e93ca5 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -164,12 +164,6 @@
dst_free(&rt->u.dst);
}
-#ifdef CONFIG_IPV6_MULTIPLE_TABLES
-#define FIB_TABLE_HASHSZ 256
-#else
-#define FIB_TABLE_HASHSZ 1
-#endif
-
static void fib6_link_table(struct net *net, struct fib6_table *tb)
{
unsigned int h;
@@ -180,7 +174,7 @@
*/
rwlock_init(&tb->tb6_lock);
- h = tb->tb6_id & (FIB_TABLE_HASHSZ - 1);
+ h = tb->tb6_id & (FIB6_TABLE_HASHSZ - 1);
/*
* No protection necessary, this is the only list mutatation
@@ -231,7 +225,7 @@
if (id == 0)
id = RT6_TABLE_MAIN;
- h = id & (FIB_TABLE_HASHSZ - 1);
+ h = id & (FIB6_TABLE_HASHSZ - 1);
rcu_read_lock();
head = &net->ipv6.fib_table_hash[h];
hlist_for_each_entry_rcu(tb, node, head, tb6_hlist) {
@@ -382,7 +376,7 @@
arg.net = net;
w->args = &arg;
- for (h = s_h; h < FIB_TABLE_HASHSZ; h++, s_e = 0) {
+ for (h = s_h; h < FIB6_TABLE_HASHSZ; h++, s_e = 0) {
e = 0;
head = &net->ipv6.fib_table_hash[h];
hlist_for_each_entry(tb, node, head, tb6_hlist) {
@@ -1368,7 +1362,7 @@
unsigned int h;
rcu_read_lock();
- for (h = 0; h < FIB_TABLE_HASHSZ; h++) {
+ for (h = 0; h < FIB6_TABLE_HASHSZ; h++) {
head = &net->ipv6.fib_table_hash[h];
hlist_for_each_entry_rcu(table, node, head, tb6_hlist) {
write_lock_bh(&table->tb6_lock);
@@ -1483,7 +1477,7 @@
if (!net->ipv6.rt6_stats)
goto out_timer;
- net->ipv6.fib_table_hash = kcalloc(FIB_TABLE_HASHSZ,
+ net->ipv6.fib_table_hash = kcalloc(FIB6_TABLE_HASHSZ,
sizeof(*net->ipv6.fib_table_hash),
GFP_KERNEL);
if (!net->ipv6.fib_table_hash)
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 6d6a427..2d9cbaa 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -63,7 +63,7 @@
if (skb->pkt_type == PACKET_OTHERHOST) {
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
rcu_read_lock();
@@ -133,7 +133,7 @@
if (ipv6_parse_hopopts(skb) < 0) {
IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
rcu_read_unlock();
- return 0;
+ return NET_RX_DROP;
}
}
@@ -149,7 +149,7 @@
drop:
rcu_read_unlock();
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
/*
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 87f8419..cd48801a 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -57,18 +57,6 @@
static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
-static __inline__ void ipv6_select_ident(struct sk_buff *skb, struct frag_hdr *fhdr)
-{
- static u32 ipv6_fragmentation_id = 1;
- static DEFINE_SPINLOCK(ip6_id_lock);
-
- spin_lock_bh(&ip6_id_lock);
- fhdr->identification = htonl(ipv6_fragmentation_id);
- if (++ipv6_fragmentation_id == 0)
- ipv6_fragmentation_id = 1;
- spin_unlock_bh(&ip6_id_lock);
-}
-
int __ip6_local_out(struct sk_buff *skb)
{
int len;
@@ -206,7 +194,8 @@
struct ipv6hdr *hdr;
u8 proto = fl->proto;
int seg_len = skb->len;
- int hlimit, tclass;
+ int hlimit = -1;
+ int tclass = 0;
u32 mtu;
if (opt) {
@@ -249,19 +238,13 @@
/*
* Fill in the IPv6 header
*/
-
- hlimit = -1;
- if (np)
+ if (np) {
+ tclass = np->tclass;
hlimit = np->hop_limit;
+ }
if (hlimit < 0)
hlimit = ip6_dst_hoplimit(dst);
- tclass = -1;
- if (np)
- tclass = np->tclass;
- if (tclass < 0)
- tclass = 0;
-
*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | fl->fl6_flowlabel;
hdr->payload_len = htons(seg_len);
@@ -706,7 +689,7 @@
skb_reset_network_header(skb);
memcpy(skb_network_header(skb), tmp_hdr, hlen);
- ipv6_select_ident(skb, fh);
+ ipv6_select_ident(fh);
fh->nexthdr = nexthdr;
fh->reserved = 0;
fh->frag_off = htons(IP6_MF);
@@ -844,7 +827,7 @@
fh->nexthdr = nexthdr;
fh->reserved = 0;
if (!frag_id) {
- ipv6_select_ident(skb, fh);
+ ipv6_select_ident(fh);
frag_id = fh->identification;
} else
fh->identification = frag_id;
@@ -1087,11 +1070,13 @@
if (!err) {
struct frag_hdr fhdr;
- /* specify the length of each IP datagram fragment*/
- skb_shinfo(skb)->gso_size = mtu - fragheaderlen -
- sizeof(struct frag_hdr);
+ /* Specify the length of each IPv6 datagram fragment.
+ * It has to be a multiple of 8.
+ */
+ skb_shinfo(skb)->gso_size = (mtu - fragheaderlen -
+ sizeof(struct frag_hdr)) & ~7;
skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
- ipv6_select_ident(skb, &fhdr);
+ ipv6_select_ident(&fhdr);
skb_shinfo(skb)->ip6_frag_id = fhdr.identification;
__skb_queue_tail(&sk->sk_write_queue, skb);
@@ -1526,7 +1511,7 @@
err = ip6_local_out(skb);
if (err) {
if (err > 0)
- err = np->recverr ? net_xmit_errno(err) : 0;
+ err = net_xmit_errno(err);
if (err)
goto error;
}
@@ -1535,6 +1520,7 @@
ip6_cork_release(inet, np);
return err;
error:
+ IP6_INC_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
goto out;
}
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 51f410e..7d25bbe 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1036,7 +1036,7 @@
return 0;
}
-static int
+static netdev_tx_t
ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip6_tnl *t = netdev_priv(dev);
@@ -1063,14 +1063,14 @@
goto tx_err;
t->recursion--;
- return 0;
+ return NETDEV_TX_OK;
tx_err:
stats->tx_errors++;
stats->tx_dropped++;
kfree_skb(skb);
t->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
static void ip6_tnl_set_cap(struct ip6_tnl *t)
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index c769f15..5c8d737 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -204,7 +204,7 @@
return 0;
}
-static struct seq_operations ip6mr_vif_seq_ops = {
+static const struct seq_operations ip6mr_vif_seq_ops = {
.start = ip6mr_vif_seq_start,
.next = ip6mr_vif_seq_next,
.stop = ip6mr_vif_seq_stop,
@@ -217,7 +217,7 @@
sizeof(struct ipmr_vif_iter));
}
-static struct file_operations ip6mr_vif_fops = {
+static const struct file_operations ip6mr_vif_fops = {
.owner = THIS_MODULE,
.open = ip6mr_vif_open,
.read = seq_read,
@@ -341,7 +341,7 @@
sizeof(struct ipmr_mfc_iter));
}
-static struct file_operations ip6mr_mfc_fops = {
+static const struct file_operations ip6mr_mfc_fops = {
.owner = THIS_MODULE,
.open = ipmr_mfc_open,
.read = seq_read,
@@ -416,7 +416,8 @@
/* Service routines creating virtual interfaces: PIMREG */
-static int reg_vif_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t reg_vif_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct net *net = dev_net(dev);
@@ -427,7 +428,7 @@
MRT6MSG_WHOLEPKT);
read_unlock(&mrt_lock);
kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static const struct net_device_ops reg_vif_netdev_ops = {
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index a7fdf9a..f5e0682 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -315,6 +315,9 @@
goto e_inval;
if (val < -1 || val > 0xff)
goto e_inval;
+ /* RFC 3542, 6.5: default traffic class of 0x0 */
+ if (val == -1)
+ val = 0;
np->tclass = val;
retv = 0;
break;
@@ -1037,8 +1040,6 @@
case IPV6_TCLASS:
val = np->tclass;
- if (val < 0)
- val = 0;
break;
case IPV6_RECVTCLASS:
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 4b264ed..71c3dac 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2107,7 +2107,6 @@
for (j=0; j<i; j++)
(void) ip6_mc_del1_src(pmc, sfmode, &psfsrc[i]);
} else if (isexclude != (pmc->mca_sfcount[MCAST_EXCLUDE] != 0)) {
- struct inet6_dev *idev = pmc->idev;
struct ip6_sf_list *psf;
/* filter mode change */
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 9eb68e9..7015478 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -98,7 +98,7 @@
static void pndisc_destructor(struct pneigh_entry *n);
static void pndisc_redo(struct sk_buff *skb);
-static struct neigh_ops ndisc_generic_ops = {
+static const struct neigh_ops ndisc_generic_ops = {
.family = AF_INET6,
.solicit = ndisc_solicit,
.error_report = ndisc_error_report,
@@ -108,7 +108,7 @@
.queue_xmit = dev_queue_xmit,
};
-static struct neigh_ops ndisc_hh_ops = {
+static const struct neigh_ops ndisc_hh_ops = {
.family = AF_INET6,
.solicit = ndisc_solicit,
.error_report = ndisc_error_report,
@@ -119,7 +119,7 @@
};
-static struct neigh_ops ndisc_direct_ops = {
+static const struct neigh_ops ndisc_direct_ops = {
.family = AF_INET6,
.output = dev_queue_xmit,
.connected_output = dev_queue_xmit,
@@ -955,8 +955,8 @@
*/
if (skb->pkt_type != PACKET_LOOPBACK)
ND_PRINTK1(KERN_WARNING
- "ICMPv6 NA: someone advertises our address on %s!\n",
- ifp->idev->dev->name);
+ "ICMPv6 NA: someone advertises our address %pI6 on %s!\n",
+ &ifp->addr, ifp->idev->dev->name);
in6_ifa_put(ifp);
return;
}
@@ -1151,10 +1151,6 @@
skb->dev->name);
return;
}
- if (in6_dev->cnf.forwarding || !in6_dev->cnf.accept_ra) {
- in6_dev_put(in6_dev);
- return;
- }
if (!ndisc_parse_options(opt, optlen, &ndopts)) {
in6_dev_put(in6_dev);
@@ -1163,6 +1159,10 @@
return;
}
+ /* skip route and link configuration on routers */
+ if (in6_dev->cnf.forwarding || !in6_dev->cnf.accept_ra)
+ goto skip_linkparms;
+
#ifdef CONFIG_IPV6_NDISC_NODETYPE
/* skip link-specific parameters from interior routers */
if (skb->ndisc_nodetype == NDISC_NODETYPE_NODEFAULT)
@@ -1283,9 +1283,7 @@
}
}
-#ifdef CONFIG_IPV6_NDISC_NODETYPE
skip_linkparms:
-#endif
/*
* Process options.
@@ -1312,6 +1310,10 @@
NEIGH_UPDATE_F_ISROUTER);
}
+ /* skip route and link configuration on routers */
+ if (in6_dev->cnf.forwarding || !in6_dev->cnf.accept_ra)
+ goto out;
+
#ifdef CONFIG_IPV6_ROUTE_INFO
if (in6_dev->cnf.accept_ra_rtr_pref && ndopts.nd_opts_ri) {
struct nd_opt_hdr *p;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index ced1f2c..cc9f8ef 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/capability.h>
#include <linux/in.h>
#include <linux/skbuff.h>
@@ -222,16 +222,11 @@
/* All zeroes == unconditional rule. */
/* Mildly perf critical (only if packet tracing is on) */
-static inline int
-unconditional(const struct ip6t_ip6 *ipv6)
+static inline bool unconditional(const struct ip6t_ip6 *ipv6)
{
- unsigned int i;
+ static const struct ip6t_ip6 uncond;
- for (i = 0; i < sizeof(*ipv6); i++)
- if (((char *)ipv6)[i])
- break;
-
- return (i == sizeof(*ipv6));
+ return memcmp(ipv6, &uncond, sizeof(uncond)) == 0;
}
#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
@@ -745,6 +740,21 @@
return ret;
}
+static bool check_underflow(struct ip6t_entry *e)
+{
+ const struct ip6t_entry_target *t;
+ unsigned int verdict;
+
+ if (!unconditional(&e->ipv6))
+ return false;
+ t = ip6t_get_target(e);
+ if (strcmp(t->u.user.name, XT_STANDARD_TARGET) != 0)
+ return false;
+ verdict = ((struct ip6t_standard_target *)t)->verdict;
+ verdict = -verdict - 1;
+ return verdict == NF_DROP || verdict == NF_ACCEPT;
+}
+
static int
check_entry_size_and_hooks(struct ip6t_entry *e,
struct xt_table_info *newinfo,
@@ -752,6 +762,7 @@
unsigned char *limit,
const unsigned int *hook_entries,
const unsigned int *underflows,
+ unsigned int valid_hooks,
unsigned int *i)
{
unsigned int h;
@@ -771,15 +782,21 @@
/* Check hooks & underflows */
for (h = 0; h < NF_INET_NUMHOOKS; h++) {
+ if (!(valid_hooks & (1 << h)))
+ continue;
if ((unsigned char *)e - base == hook_entries[h])
newinfo->hook_entry[h] = hook_entries[h];
- if ((unsigned char *)e - base == underflows[h])
+ if ((unsigned char *)e - base == underflows[h]) {
+ if (!check_underflow(e)) {
+ pr_err("Underflows must be unconditional and "
+ "use the STANDARD target with "
+ "ACCEPT/DROP\n");
+ return -EINVAL;
+ }
newinfo->underflow[h] = underflows[h];
+ }
}
- /* FIXME: underflows must be unconditional, standard verdicts
- < 0 (not IP6T_RETURN). --RR */
-
/* Clear counters and comefrom */
e->counters = ((struct xt_counters) { 0, 0 });
e->comefrom = 0;
@@ -842,7 +859,7 @@
newinfo,
entry0,
entry0 + size,
- hook_entries, underflows, &i);
+ hook_entries, underflows, valid_hooks, &i);
if (ret != 0)
return ret;
@@ -2083,7 +2100,8 @@
return ret;
}
-struct xt_table *ip6t_register_table(struct net *net, struct xt_table *table,
+struct xt_table *ip6t_register_table(struct net *net,
+ const struct xt_table *table,
const struct ip6t_replace *repl)
{
int ret;
diff --git a/net/ipv6/netfilter/ip6t_eui64.c b/net/ipv6/netfilter/ip6t_eui64.c
index db610ba..ca287f6 100644
--- a/net/ipv6/netfilter/ip6t_eui64.c
+++ b/net/ipv6/netfilter/ip6t_eui64.c
@@ -23,7 +23,6 @@
eui64_mt6(const struct sk_buff *skb, const struct xt_match_param *par)
{
unsigned char eui64[8];
- int i = 0;
if (!(skb_mac_header(skb) >= skb->head &&
skb_mac_header(skb) + ETH_HLEN <= skb->data) &&
@@ -42,12 +41,8 @@
eui64[4] = 0xfe;
eui64[0] ^= 0x02;
- i = 0;
- while (ipv6_hdr(skb)->saddr.s6_addr[8 + i] == eui64[i]
- && i < 8)
- i++;
-
- if (i == 8)
+ if (!memcmp(ipv6_hdr(skb)->saddr.s6_addr + 8, eui64,
+ sizeof(eui64)))
return true;
}
}
diff --git a/net/ipv6/netfilter/ip6table_filter.c b/net/ipv6/netfilter/ip6table_filter.c
index ef5a0a3..6f4383a 100644
--- a/net/ipv6/netfilter/ip6table_filter.c
+++ b/net/ipv6/netfilter/ip6table_filter.c
@@ -51,11 +51,11 @@
.term = IP6T_ERROR_INIT, /* ERROR */
};
-static struct xt_table packet_filter = {
+static const struct xt_table packet_filter = {
.name = "filter",
.valid_hooks = FILTER_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET6,
+ .af = NFPROTO_IPV6,
};
/* The work comes in here from netfilter.c. */
@@ -95,21 +95,21 @@
{
.hook = ip6t_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP6_PRI_FILTER,
},
{
.hook = ip6t_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP6_PRI_FILTER,
},
{
.hook = ip6t_local_out_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_FILTER,
},
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index ab0d398..0ad9143 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -21,7 +21,7 @@
(1 << NF_INET_LOCAL_OUT) | \
(1 << NF_INET_POST_ROUTING))
-static struct
+static const struct
{
struct ip6t_replace repl;
struct ip6t_standard entries[5];
@@ -57,11 +57,11 @@
.term = IP6T_ERROR_INIT, /* ERROR */
};
-static struct xt_table packet_mangler = {
+static const struct xt_table packet_mangler = {
.name = "mangle",
.valid_hooks = MANGLE_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET6,
+ .af = NFPROTO_IPV6,
};
/* The work comes in here from netfilter.c. */
@@ -136,35 +136,35 @@
{
.hook = ip6t_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP6_PRI_MANGLE,
},
{
.hook = ip6t_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP6_PRI_MANGLE,
},
{
.hook = ip6t_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP6_PRI_MANGLE,
},
{
.hook = ip6t_local_out_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_MANGLE,
},
{
.hook = ip6t_post_routing_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP6_PRI_MANGLE,
},
diff --git a/net/ipv6/netfilter/ip6table_raw.c b/net/ipv6/netfilter/ip6table_raw.c
index 4b792b6..ed1a118 100644
--- a/net/ipv6/netfilter/ip6table_raw.c
+++ b/net/ipv6/netfilter/ip6table_raw.c
@@ -8,7 +8,7 @@
#define RAW_VALID_HOOKS ((1 << NF_INET_PRE_ROUTING) | (1 << NF_INET_LOCAL_OUT))
-static struct
+static const struct
{
struct ip6t_replace repl;
struct ip6t_standard entries[2];
@@ -35,11 +35,11 @@
.term = IP6T_ERROR_INIT, /* ERROR */
};
-static struct xt_table packet_raw = {
+static const struct xt_table packet_raw = {
.name = "raw",
.valid_hooks = RAW_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET6,
+ .af = NFPROTO_IPV6,
};
/* The work comes in here from netfilter.c. */
@@ -68,14 +68,14 @@
static struct nf_hook_ops ip6t_ops[] __read_mostly = {
{
.hook = ip6t_pre_routing_hook,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP6_PRI_FIRST,
.owner = THIS_MODULE,
},
{
.hook = ip6t_local_out_hook,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_FIRST,
.owner = THIS_MODULE,
diff --git a/net/ipv6/netfilter/ip6table_security.c b/net/ipv6/netfilter/ip6table_security.c
index 0ea37ff..41b444c 100644
--- a/net/ipv6/netfilter/ip6table_security.c
+++ b/net/ipv6/netfilter/ip6table_security.c
@@ -26,7 +26,7 @@
(1 << NF_INET_FORWARD) | \
(1 << NF_INET_LOCAL_OUT)
-static struct
+static const struct
{
struct ip6t_replace repl;
struct ip6t_standard entries[3];
@@ -56,11 +56,11 @@
.term = IP6T_ERROR_INIT, /* ERROR */
};
-static struct xt_table security_table = {
+static const struct xt_table security_table = {
.name = "security",
.valid_hooks = SECURITY_VALID_HOOKS,
.me = THIS_MODULE,
- .af = AF_INET6,
+ .af = NFPROTO_IPV6,
};
static unsigned int
@@ -101,21 +101,21 @@
{
.hook = ip6t_local_in_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP6_PRI_SECURITY,
},
{
.hook = ip6t_forward_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_FORWARD,
.priority = NF_IP6_PRI_SECURITY,
},
{
.hook = ip6t_local_out_hook,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_SECURITY,
},
diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
index 2a15c2d..5f2ec20 100644
--- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
@@ -27,6 +27,7 @@
#include <net/netfilter/nf_conntrack_l3proto.h>
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+#include <net/netfilter/nf_log.h>
static bool ipv6_pkt_to_tuple(const struct sk_buff *skb, unsigned int nhoff,
struct nf_conntrack_tuple *tuple)
@@ -176,8 +177,11 @@
}
ret = helper->help(skb, protoff, ct, ctinfo);
- if (ret != NF_ACCEPT)
+ if (ret != NF_ACCEPT) {
+ nf_log_packet(NFPROTO_IPV6, hooknum, skb, in, out, NULL,
+ "nf_ct_%s: dropping packet", helper->name);
return ret;
+ }
out:
/* We've seen it coming out the other side: confirm it */
return nf_conntrack_confirm(skb);
@@ -265,42 +269,42 @@
{
.hook = ipv6_defrag,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP6_PRI_CONNTRACK_DEFRAG,
},
{
.hook = ipv6_conntrack_in,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_PRE_ROUTING,
.priority = NF_IP6_PRI_CONNTRACK,
},
{
.hook = ipv6_conntrack_local,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_CONNTRACK,
},
{
.hook = ipv6_defrag,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_CONNTRACK_DEFRAG,
},
{
.hook = ipv6_confirm,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_POST_ROUTING,
.priority = NF_IP6_PRI_LAST,
},
{
.hook = ipv6_confirm,
.owner = THIS_MODULE,
- .pf = PF_INET6,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_IN,
.priority = NF_IP6_PRI_LAST-1,
},
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 590ddef..c9605c3 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -101,7 +101,7 @@
};
/* RFC 4293 v6 ICMPMsgStatsTable; named items for RFC 2466 compatibility */
-static char *icmp6type2name[256] = {
+static const char *const icmp6type2name[256] = {
[ICMPV6_DEST_UNREACH] = "DestUnreachs",
[ICMPV6_PKT_TOOBIG] = "PktTooBigs",
[ICMPV6_TIME_EXCEED] = "TimeExcds",
@@ -144,7 +144,7 @@
/* print by name -- deprecated items */
for (i = 0; i < ICMP6MSG_MIB_MAX; i++) {
int icmptype;
- char *p;
+ const char *p;
icmptype = i & 0xff;
p = icmp6type2name[icmptype];
diff --git a/net/ipv6/protocol.c b/net/ipv6/protocol.c
index 9ab7891..568864f 100644
--- a/net/ipv6/protocol.c
+++ b/net/ipv6/protocol.c
@@ -20,20 +20,9 @@
* - Removed unused variable 'inet6_protocol_base'
* - Modified inet6_del_protocol() to correctly maintain copy bit.
*/
-
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/net.h>
-#include <linux/in6.h>
+#include <linux/module.h>
#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/sock.h>
-#include <net/snmp.h>
-
-#include <net/ipv6.h>
+#include <linux/spinlock.h>
#include <net/protocol.h>
struct inet6_protocol *inet6_protos[MAX_INET_PROTOS];
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index d6c3c1c..7d675b8 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -642,7 +642,7 @@
err = NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, rt->u.dst.dev,
dst_output);
if (err > 0)
- err = np->recverr ? net_xmit_errno(err) : 0;
+ err = net_xmit_errno(err);
if (err)
goto error;
out:
@@ -653,6 +653,8 @@
kfree_skb(skb);
error:
IP6_INC_STATS(sock_net(sk), rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
+ if (err == -ENOBUFS && !np->recverr)
+ err = 0;
return err;
}
@@ -877,11 +879,8 @@
hlimit = ip6_dst_hoplimit(dst);
}
- if (tclass < 0) {
+ if (tclass < 0)
tclass = np->tclass;
- if (tclass < 0)
- tclass = 0;
- }
if (msg->msg_flags&MSG_CONFIRM)
goto do_confirm;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 1473ee0..9ccfef3 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -665,7 +665,7 @@
net->ipv6.sysctl.ip6_rt_gc_elasticity = 1;
net->ipv6.sysctl.ip6_rt_gc_min_interval = 0;
- ip6_dst_gc(net->ipv6.ip6_dst_ops);
+ ip6_dst_gc(&net->ipv6.ip6_dst_ops);
net->ipv6.sysctl.ip6_rt_gc_elasticity =
saved_rt_elasticity;
@@ -970,7 +970,7 @@
if (unlikely(idev == NULL))
return NULL;
- rt = ip6_dst_alloc(net->ipv6.ip6_dst_ops);
+ rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
if (unlikely(rt == NULL)) {
in6_dev_put(idev);
goto out;
@@ -1060,7 +1060,7 @@
static int ip6_dst_gc(struct dst_ops *ops)
{
unsigned long now = jiffies;
- struct net *net = ops->dst_net;
+ struct net *net = container_of(ops, struct net, ipv6.ip6_dst_ops);
int rt_min_interval = net->ipv6.sysctl.ip6_rt_gc_min_interval;
int rt_max_size = net->ipv6.sysctl.ip6_rt_max_size;
int rt_elasticity = net->ipv6.sysctl.ip6_rt_gc_elasticity;
@@ -1154,7 +1154,7 @@
goto out;
}
- rt = ip6_dst_alloc(net->ipv6.ip6_dst_ops);
+ rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
if (rt == NULL) {
err = -ENOMEM;
@@ -1643,7 +1643,7 @@
static struct rt6_info * ip6_rt_copy(struct rt6_info *ort)
{
struct net *net = dev_net(ort->rt6i_dev);
- struct rt6_info *rt = ip6_dst_alloc(net->ipv6.ip6_dst_ops);
+ struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
if (rt) {
rt->u.dst.input = ort->u.dst.input;
@@ -1923,7 +1923,7 @@
int anycast)
{
struct net *net = dev_net(idev->dev);
- struct rt6_info *rt = ip6_dst_alloc(net->ipv6.ip6_dst_ops);
+ struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
struct neighbour *neigh;
if (rt == NULL)
@@ -2501,7 +2501,7 @@
net->ipv6.rt6_stats->fib_rt_alloc,
net->ipv6.rt6_stats->fib_rt_entries,
net->ipv6.rt6_stats->fib_rt_cache,
- atomic_read(&net->ipv6.ip6_dst_ops->entries),
+ atomic_read(&net->ipv6.ip6_dst_ops.entries),
net->ipv6.rt6_stats->fib_discarded_routes);
return 0;
@@ -2637,7 +2637,7 @@
if (table) {
table[0].data = &net->ipv6.sysctl.flush_delay;
- table[1].data = &net->ipv6.ip6_dst_ops->gc_thresh;
+ table[1].data = &net->ipv6.ip6_dst_ops.gc_thresh;
table[2].data = &net->ipv6.sysctl.ip6_rt_max_size;
table[3].data = &net->ipv6.sysctl.ip6_rt_gc_min_interval;
table[4].data = &net->ipv6.sysctl.ip6_rt_gc_timeout;
@@ -2655,12 +2655,8 @@
{
int ret = -ENOMEM;
- net->ipv6.ip6_dst_ops = kmemdup(&ip6_dst_ops_template,
- sizeof(*net->ipv6.ip6_dst_ops),
- GFP_KERNEL);
- if (!net->ipv6.ip6_dst_ops)
- goto out;
- net->ipv6.ip6_dst_ops->dst_net = hold_net(net);
+ memcpy(&net->ipv6.ip6_dst_ops, &ip6_dst_ops_template,
+ sizeof(net->ipv6.ip6_dst_ops));
net->ipv6.ip6_null_entry = kmemdup(&ip6_null_entry_template,
sizeof(*net->ipv6.ip6_null_entry),
@@ -2669,7 +2665,7 @@
goto out_ip6_dst_ops;
net->ipv6.ip6_null_entry->u.dst.path =
(struct dst_entry *)net->ipv6.ip6_null_entry;
- net->ipv6.ip6_null_entry->u.dst.ops = net->ipv6.ip6_dst_ops;
+ net->ipv6.ip6_null_entry->u.dst.ops = &net->ipv6.ip6_dst_ops;
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
@@ -2679,7 +2675,7 @@
goto out_ip6_null_entry;
net->ipv6.ip6_prohibit_entry->u.dst.path =
(struct dst_entry *)net->ipv6.ip6_prohibit_entry;
- net->ipv6.ip6_prohibit_entry->u.dst.ops = net->ipv6.ip6_dst_ops;
+ net->ipv6.ip6_prohibit_entry->u.dst.ops = &net->ipv6.ip6_dst_ops;
net->ipv6.ip6_blk_hole_entry = kmemdup(&ip6_blk_hole_entry_template,
sizeof(*net->ipv6.ip6_blk_hole_entry),
@@ -2688,7 +2684,7 @@
goto out_ip6_prohibit_entry;
net->ipv6.ip6_blk_hole_entry->u.dst.path =
(struct dst_entry *)net->ipv6.ip6_blk_hole_entry;
- net->ipv6.ip6_blk_hole_entry->u.dst.ops = net->ipv6.ip6_dst_ops;
+ net->ipv6.ip6_blk_hole_entry->u.dst.ops = &net->ipv6.ip6_dst_ops;
#endif
net->ipv6.sysctl.flush_delay = 0;
@@ -2717,8 +2713,6 @@
kfree(net->ipv6.ip6_null_entry);
#endif
out_ip6_dst_ops:
- release_net(net->ipv6.ip6_dst_ops->dst_net);
- kfree(net->ipv6.ip6_dst_ops);
goto out;
}
@@ -2733,8 +2727,6 @@
kfree(net->ipv6.ip6_prohibit_entry);
kfree(net->ipv6.ip6_blk_hole_entry);
#endif
- release_net(net->ipv6.ip6_dst_ops->dst_net);
- kfree(net->ipv6.ip6_dst_ops);
}
static struct pernet_operations ip6_route_net_ops = {
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 98b7327d..0ae4f64 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -609,7 +609,8 @@
* and that skb is filled properly by that function.
*/
-static int ipip6_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
struct net_device_stats *stats = &tunnel->dev->stats;
@@ -753,7 +754,7 @@
stats->tx_dropped++;
dev_kfree_skb(skb);
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
if (skb->sk)
skb_set_owner_w(new_skb, skb->sk);
@@ -778,7 +779,7 @@
iph->version = 4;
iph->ihl = sizeof(struct iphdr)>>2;
if (mtu > IPV6_MIN_MTU)
- iph->frag_off = htons(IP_DF);
+ iph->frag_off = tiph->frag_off;
else
iph->frag_off = 0;
@@ -794,7 +795,7 @@
IPTUNNEL_XMIT();
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
tx_error_icmp:
dst_link_failure(skb);
@@ -802,7 +803,7 @@
stats->tx_errors++;
dev_kfree_skb(skb);
tunnel->recursion--;
- return 0;
+ return NETDEV_TX_OK;
}
static void ipip6_tunnel_bind_dev(struct net_device *dev)
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index a031034..0dc6a4e 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -40,7 +40,7 @@
{ .ctl_name = 0 }
};
-static ctl_table ipv6_table[] = {
+static ctl_table ipv6_rotable[] = {
{
.ctl_name = NET_IPV6_MLD_MAX_MSF,
.procname = "mld_max_msf",
@@ -130,7 +130,7 @@
{
int err = -ENOMEM;
- ip6_header = register_net_sysctl_rotable(net_ipv6_ctl_path, ipv6_table);
+ ip6_header = register_net_sysctl_rotable(net_ipv6_ctl_path, ipv6_rotable);
if (ip6_header == NULL)
goto out;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index d849dd5..3aae0f2 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -75,11 +75,11 @@
static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb);
-static struct inet_connection_sock_af_ops ipv6_mapped;
-static struct inet_connection_sock_af_ops ipv6_specific;
+static const struct inet_connection_sock_af_ops ipv6_mapped;
+static const struct inet_connection_sock_af_ops ipv6_specific;
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_sock_af_ops tcp_sock_ipv6_specific;
-static struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific;
+static const struct tcp_sock_af_ops tcp_sock_ipv6_specific;
+static const struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific;
#else
static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk,
struct in6_addr *addr)
@@ -591,7 +591,7 @@
}
sk->sk_route_caps &= ~NETIF_F_GSO_MASK;
}
- if (tcp_alloc_md5sig_pool() == NULL) {
+ if (tcp_alloc_md5sig_pool(sk) == NULL) {
kfree(newkey);
return -ENOMEM;
}
@@ -894,7 +894,7 @@
};
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
+static const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
.md5_lookup = tcp_v6_reqsk_md5_lookup,
.calc_md5_hash = tcp_v6_md5_hash_skb,
};
@@ -1003,6 +1003,7 @@
skb_reserve(buff, MAX_HEADER + sizeof(struct ipv6hdr) + tot_len);
t1 = (struct tcphdr *) skb_push(buff, tot_len);
+ skb_reset_transport_header(skb);
/* Swap the send and the receive. */
memset(t1, 0, sizeof(*t1));
@@ -1760,7 +1761,7 @@
return 0;
}
-static struct inet_connection_sock_af_ops ipv6_specific = {
+static const struct inet_connection_sock_af_ops ipv6_specific = {
.queue_xmit = inet6_csk_xmit,
.send_check = tcp_v6_send_check,
.rebuild_header = inet6_sk_rebuild_header,
@@ -1780,7 +1781,7 @@
};
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_sock_af_ops tcp_sock_ipv6_specific = {
+static const struct tcp_sock_af_ops tcp_sock_ipv6_specific = {
.md5_lookup = tcp_v6_md5_lookup,
.calc_md5_hash = tcp_v6_md5_hash_skb,
.md5_add = tcp_v6_md5_add_func,
@@ -1792,7 +1793,7 @@
* TCP over IPv4 via INET6 API
*/
-static struct inet_connection_sock_af_ops ipv6_mapped = {
+static const struct inet_connection_sock_af_ops ipv6_mapped = {
.queue_xmit = ip_queue_xmit,
.send_check = tcp_v4_send_check,
.rebuild_header = inet_sk_rebuild_header,
@@ -1812,7 +1813,7 @@
};
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific = {
+static const struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific = {
.md5_lookup = tcp_v4_md5_lookup,
.calc_md5_hash = tcp_v4_md5_hash_skb,
.md5_add = tcp_v6_md5_add_func,
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 33b59bd..1640406 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -638,6 +638,47 @@
}
}
+/**
+ * udp6_hwcsum_outgoing - handle outgoing HW checksumming
+ * @sk: socket we are sending on
+ * @skb: sk_buff containing the filled-in UDP header
+ * (checksum field must be zeroed out)
+ */
+static void udp6_hwcsum_outgoing(struct sock *sk, struct sk_buff *skb,
+ const struct in6_addr *saddr,
+ const struct in6_addr *daddr, int len)
+{
+ unsigned int offset;
+ struct udphdr *uh = udp_hdr(skb);
+ __wsum csum = 0;
+
+ if (skb_queue_len(&sk->sk_write_queue) == 1) {
+ /* Only one fragment on the socket. */
+ skb->csum_start = skb_transport_header(skb) - skb->head;
+ skb->csum_offset = offsetof(struct udphdr, check);
+ uh->check = ~csum_ipv6_magic(saddr, daddr, len, IPPROTO_UDP, 0);
+ } else {
+ /*
+ * HW-checksum won't work as there are two or more
+ * fragments on the socket so that all csums of sk_buffs
+ * should be together
+ */
+ offset = skb_transport_offset(skb);
+ skb->csum = skb_checksum(skb, offset, skb->len - offset, 0);
+
+ skb->ip_summed = CHECKSUM_NONE;
+
+ skb_queue_walk(&sk->sk_write_queue, skb) {
+ csum = csum_add(csum, skb->csum);
+ }
+
+ uh->check = csum_ipv6_magic(saddr, daddr, len, IPPROTO_UDP,
+ csum);
+ if (uh->check == 0)
+ uh->check = CSUM_MANGLED_0;
+ }
+}
+
/*
* Sending
*/
@@ -668,7 +709,11 @@
if (is_udplite)
csum = udplite_csum_outgoing(sk, skb);
- else
+ else if (skb->ip_summed == CHECKSUM_PARTIAL) { /* UDP hardware csum */
+ udp6_hwcsum_outgoing(sk, skb, &fl->fl6_src, &fl->fl6_dst,
+ up->len);
+ goto send;
+ } else
csum = udp_csum_outgoing(sk, skb);
/* add protocol-dependent pseudo-header */
@@ -677,13 +722,20 @@
if (uh->check == 0)
uh->check = CSUM_MANGLED_0;
+send:
err = ip6_push_pending_frames(sk);
+ if (err) {
+ if (err == -ENOBUFS && !inet6_sk(sk)->recverr) {
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_SNDBUFERRORS, is_udplite);
+ err = 0;
+ }
+ } else
+ UDP6_INC_STATS_USER(sock_net(sk),
+ UDP_MIB_OUTDATAGRAMS, is_udplite);
out:
up->len = 0;
up->pending = 0;
- if (!err)
- UDP6_INC_STATS_USER(sock_net(sk),
- UDP_MIB_OUTDATAGRAMS, is_udplite);
return err;
}
@@ -900,11 +952,8 @@
hlimit = ip6_dst_hoplimit(dst);
}
- if (tclass < 0) {
+ if (tclass < 0)
tclass = np->tclass;
- if (tclass < 0)
- tclass = 0;
- }
if (msg->msg_flags&MSG_CONFIRM)
goto do_confirm;
@@ -1032,9 +1081,102 @@
}
#endif
+static int udp6_ufo_send_check(struct sk_buff *skb)
+{
+ struct ipv6hdr *ipv6h;
+ struct udphdr *uh;
+
+ if (!pskb_may_pull(skb, sizeof(*uh)))
+ return -EINVAL;
+
+ ipv6h = ipv6_hdr(skb);
+ uh = udp_hdr(skb);
+
+ uh->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr, skb->len,
+ IPPROTO_UDP, 0);
+ skb->csum_start = skb_transport_header(skb) - skb->head;
+ skb->csum_offset = offsetof(struct udphdr, check);
+ skb->ip_summed = CHECKSUM_PARTIAL;
+ return 0;
+}
+
+static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, int features)
+{
+ struct sk_buff *segs = ERR_PTR(-EINVAL);
+ unsigned int mss;
+ unsigned int unfrag_ip6hlen, unfrag_len;
+ struct frag_hdr *fptr;
+ u8 *mac_start, *prevhdr;
+ u8 nexthdr;
+ u8 frag_hdr_sz = sizeof(struct frag_hdr);
+ int offset;
+ __wsum csum;
+
+ mss = skb_shinfo(skb)->gso_size;
+ if (unlikely(skb->len <= mss))
+ goto out;
+
+ if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
+ /* Packet is from an untrusted source, reset gso_segs. */
+ int type = skb_shinfo(skb)->gso_type;
+
+ if (unlikely(type & ~(SKB_GSO_UDP | SKB_GSO_DODGY) ||
+ !(type & (SKB_GSO_UDP))))
+ goto out;
+
+ skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
+
+ segs = NULL;
+ goto out;
+ }
+
+ /* Do software UFO. Complete and fill in the UDP checksum as HW cannot
+ * do checksum of UDP packets sent as multiple IP fragments.
+ */
+ offset = skb->csum_start - skb_headroom(skb);
+ csum = skb_checksum(skb, offset, skb->len- offset, 0);
+ offset += skb->csum_offset;
+ *(__sum16 *)(skb->data + offset) = csum_fold(csum);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Check if there is enough headroom to insert fragment header. */
+ if ((skb_headroom(skb) < frag_hdr_sz) &&
+ pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
+ goto out;
+
+ /* Find the unfragmentable header and shift it left by frag_hdr_sz
+ * bytes to insert fragment header.
+ */
+ unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+ nexthdr = *prevhdr;
+ *prevhdr = NEXTHDR_FRAGMENT;
+ unfrag_len = skb_network_header(skb) - skb_mac_header(skb) +
+ unfrag_ip6hlen;
+ mac_start = skb_mac_header(skb);
+ memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len);
+
+ skb->mac_header -= frag_hdr_sz;
+ skb->network_header -= frag_hdr_sz;
+
+ fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
+ fptr->nexthdr = nexthdr;
+ fptr->reserved = 0;
+ ipv6_select_ident(fptr);
+
+ /* Fragment the skb. ipv6 header and the remaining fields of the
+ * fragment header are updated in ipv6_gso_segment()
+ */
+ segs = skb_segment(skb, features);
+
+out:
+ return segs;
+}
+
static struct inet6_protocol udpv6_protocol = {
.handler = udpv6_rcv,
.err_handler = udpv6_err,
+ .gso_send_check = udp6_ufo_send_check,
+ .gso_segment = udp6_ufo_fragment,
.flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
};
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 3a3c677..8ec3d45 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -306,9 +306,26 @@
xfrm_policy_unregister_afinfo(&xfrm6_policy_afinfo);
}
+#ifdef CONFIG_SYSCTL
+static struct ctl_table xfrm6_policy_table[] = {
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "xfrm6_gc_thresh",
+ .data = &xfrm6_dst_ops.gc_thresh,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+ { }
+};
+
+static struct ctl_table_header *sysctl_hdr;
+#endif
+
int __init xfrm6_init(void)
{
int ret;
+ unsigned int gc_thresh;
ret = xfrm6_policy_init();
if (ret)
@@ -317,6 +334,23 @@
ret = xfrm6_state_init();
if (ret)
goto out_policy;
+ /*
+ * We need a good default value for the xfrm6 gc threshold.
+ * In ipv4 we set it to the route hash table size * 8, which
+ * is half the size of the maximaum route cache for ipv4. It
+ * would be good to do the same thing for v6, except the table is
+ * constructed differently here. Here each table for a net namespace
+ * can have FIB_TABLE_HASHSZ entries, so lets go with the same
+ * computation that we used for ipv4 here. Also, lets keep the initial
+ * gc_thresh to a minimum of 1024, since, the ipv6 route cache defaults
+ * to that as a minimum as well
+ */
+ gc_thresh = FIB6_TABLE_HASHSZ * 8;
+ xfrm6_dst_ops.gc_thresh = (gc_thresh < 1024) ? 1024 : gc_thresh;
+#ifdef CONFIG_SYSCTL
+ sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv6_ctl_path,
+ xfrm6_policy_table);
+#endif
out:
return ret;
out_policy:
@@ -326,6 +360,10 @@
void xfrm6_fini(void)
{
+#ifdef CONFIG_SYSCTL
+ if (sysctl_hdr)
+ unregister_net_sysctl_table(sysctl_hdr);
+#endif
//xfrm6_input_fini();
xfrm6_policy_fini();
xfrm6_state_fini();
diff --git a/net/irda/ircomm/ircomm_event.c b/net/irda/ircomm/ircomm_event.c
index c35b3ef..d78554f 100644
--- a/net/irda/ircomm/ircomm_event.c
+++ b/net/irda/ircomm/ircomm_event.c
@@ -49,7 +49,7 @@
static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event,
struct sk_buff *skb, struct ircomm_info *info);
-char *ircomm_state[] = {
+const char *const ircomm_state[] = {
"IRCOMM_IDLE",
"IRCOMM_WAITI",
"IRCOMM_WAITR",
@@ -57,7 +57,7 @@
};
#ifdef CONFIG_IRDA_DEBUG
-static char *ircomm_event[] = {
+static const char *const ircomm_event[] = {
"IRCOMM_CONNECT_REQUEST",
"IRCOMM_CONNECT_RESPONSE",
"IRCOMM_TTP_CONNECT_INDICATION",
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
index 9032a1d..eafc010 100644
--- a/net/irda/ircomm/ircomm_tty_attach.c
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -80,7 +80,7 @@
struct sk_buff *skb,
struct ircomm_tty_info *info);
-char *ircomm_tty_state[] = {
+const char *const ircomm_tty_state[] = {
"IRCOMM_TTY_IDLE",
"IRCOMM_TTY_SEARCH",
"IRCOMM_TTY_QUERY_PARAMETERS",
@@ -91,7 +91,7 @@
};
#ifdef CONFIG_IRDA_DEBUG
-static char *ircomm_tty_event[] = {
+static const char *const ircomm_tty_event[] = {
"IRCOMM_TTY_ATTACH_CABLE",
"IRCOMM_TTY_DETACH_CABLE",
"IRCOMM_TTY_DATA_REQUEST",
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index 4a105dc..294e34d 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -44,7 +44,7 @@
#ifdef CONFIG_IRDA_DEBUG
/* FIXME: This one should go in irlmp.c */
-static const char *ias_charset_types[] = {
+static const char *const ias_charset_types[] = {
"CS_ASCII",
"CS_ISO_8859_1",
"CS_ISO_8859_2",
@@ -966,7 +966,7 @@
#ifdef CONFIG_PROC_FS
-static const char *ias_value_types[] = {
+static const char *const ias_value_types[] = {
"IAS_MISSING",
"IAS_INTEGER",
"IAS_OCT_SEQ",
diff --git a/net/irda/irlan/irlan_common.c b/net/irda/irlan/irlan_common.c
index 774d73a..6211682 100644
--- a/net/irda/irlan/irlan_common.c
+++ b/net/irda/irlan/irlan_common.c
@@ -69,14 +69,14 @@
static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */
#ifdef CONFIG_PROC_FS
-static const char *irlan_access[] = {
+static const char *const irlan_access[] = {
"UNKNOWN",
"DIRECT",
"PEER",
"HOSTED"
};
-static const char *irlan_media[] = {
+static const char *const irlan_media[] = {
"UNKNOWN",
"802.3",
"802.5"
diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c
index 724bcf9..7b6b631 100644
--- a/net/irda/irlan/irlan_eth.c
+++ b/net/irda/irlan/irlan_eth.c
@@ -41,7 +41,8 @@
static int irlan_eth_open(struct net_device *dev);
static int irlan_eth_close(struct net_device *dev);
-static int irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static void irlan_eth_set_multicast_list( struct net_device *dev);
static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev);
@@ -162,7 +163,8 @@
* Transmits ethernet frames over IrDA link.
*
*/
-static int irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct irlan_cb *self = netdev_priv(dev);
int ret;
@@ -177,7 +179,7 @@
/* Did the realloc succeed? */
if (new_skb == NULL)
- return 0;
+ return NETDEV_TX_OK;
/* Use the new skb instead */
skb = new_skb;
@@ -209,7 +211,7 @@
self->stats.tx_bytes += skb->len;
}
- return 0;
+ return NETDEV_TX_OK;
}
/*
diff --git a/net/irda/irlap.c b/net/irda/irlap.c
index e4965b7..356e65b 100644
--- a/net/irda/irlap.c
+++ b/net/irda/irlap.c
@@ -63,7 +63,7 @@
struct qos_info *qos_user);
#ifdef CONFIG_IRDA_DEBUG
-static char *lap_reasons[] = {
+static const char *const lap_reasons[] = {
"ERROR, NOT USED",
"LAP_DISC_INDICATION",
"LAP_NO_RESPONSE",
diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
index 16c4ef0..c5c5195 100644
--- a/net/irda/irlap_event.c
+++ b/net/irda/irlap_event.c
@@ -78,7 +78,7 @@
struct sk_buff *, struct irlap_info *);
#ifdef CONFIG_IRDA_DEBUG
-static const char *irlap_event[] = {
+static const char *const irlap_event[] = {
"DISCOVERY_REQUEST",
"CONNECT_REQUEST",
"CONNECT_RESPONSE",
@@ -120,7 +120,7 @@
};
#endif /* CONFIG_IRDA_DEBUG */
-const char *irlap_state[] = {
+const char *const irlap_state[] = {
"LAP_NDM",
"LAP_QUERY",
"LAP_REPLY",
diff --git a/net/irda/irlmp_event.c b/net/irda/irlmp_event.c
index 78cce0c..c1fb5db 100644
--- a/net/irda/irlmp_event.c
+++ b/net/irda/irlmp_event.c
@@ -33,13 +33,13 @@
#include <net/irda/irlmp_frame.h>
#include <net/irda/irlmp_event.h>
-const char *irlmp_state[] = {
+const char *const irlmp_state[] = {
"LAP_STANDBY",
"LAP_U_CONNECT",
"LAP_ACTIVE",
};
-const char *irlsap_state[] = {
+const char *const irlsap_state[] = {
"LSAP_DISCONNECTED",
"LSAP_CONNECT",
"LSAP_CONNECT_PEND",
@@ -49,7 +49,7 @@
};
#ifdef CONFIG_IRDA_DEBUG
-static const char *irlmp_event[] = {
+static const char *const irlmp_event[] = {
"LM_CONNECT_REQUEST",
"LM_CONNECT_CONFIRM",
"LM_CONNECT_RESPONSE",
diff --git a/net/irda/irnet/irnet_ppp.h b/net/irda/irnet/irnet_ppp.h
index d9f8bd4..b5df241 100644
--- a/net/irda/irnet/irnet_ppp.h
+++ b/net/irda/irnet/irnet_ppp.h
@@ -95,7 +95,7 @@
/**************************** VARIABLES ****************************/
/* Filesystem callbacks (to call us) */
-static struct file_operations irnet_device_fops =
+static const struct file_operations irnet_device_fops =
{
.owner = THIS_MODULE,
.read = dev_irnet_read,
diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c
index 8dd7ed7..476b307 100644
--- a/net/irda/irnetlink.c
+++ b/net/irda/irnetlink.c
@@ -115,7 +115,7 @@
genlmsg_end(msg, hdr);
- return genlmsg_unicast(msg, info->snd_pid);
+ return genlmsg_reply(msg, info);
err_out:
nlmsg_free(msg);
diff --git a/net/irda/irproc.c b/net/irda/irproc.c
index 8ff1861..318766e 100644
--- a/net/irda/irproc.c
+++ b/net/irda/irproc.c
@@ -34,21 +34,21 @@
#include <net/irda/irlap.h>
#include <net/irda/irlmp.h>
-extern struct file_operations discovery_seq_fops;
-extern struct file_operations irlap_seq_fops;
-extern struct file_operations irlmp_seq_fops;
-extern struct file_operations irttp_seq_fops;
-extern struct file_operations irias_seq_fops;
+extern const struct file_operations discovery_seq_fops;
+extern const struct file_operations irlap_seq_fops;
+extern const struct file_operations irlmp_seq_fops;
+extern const struct file_operations irttp_seq_fops;
+extern const struct file_operations irias_seq_fops;
struct irda_entry {
const char *name;
- struct file_operations *fops;
+ const struct file_operations *fops;
};
struct proc_dir_entry *proc_irda;
EXPORT_SYMBOL(proc_irda);
-static struct irda_entry irda_dirs[] = {
+static const struct irda_entry irda_dirs[] = {
{"discovery", &discovery_seq_fops},
{"irttp", &irttp_seq_fops},
{"irlmp", &irlmp_seq_fops},
diff --git a/net/key/af_key.c b/net/key/af_key.c
index dba9abd..4e98193 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3705,7 +3705,7 @@
read_unlock(&pfkey_table_lock);
}
-static struct seq_operations pfkey_seq_ops = {
+static const struct seq_operations pfkey_seq_ops = {
.start = pfkey_seq_start,
.next = pfkey_seq_next,
.stop = pfkey_seq_stop,
@@ -3718,7 +3718,7 @@
sizeof(struct seq_net_private));
}
-static struct file_operations pfkey_proc_ops = {
+static const struct file_operations pfkey_proc_ops = {
.open = pfkey_seq_open,
.read = seq_read,
.llseek = seq_lseek,
diff --git a/net/lapb/lapb_iface.c b/net/lapb/lapb_iface.c
index 2ba1bc4..bda96d1 100644
--- a/net/lapb/lapb_iface.c
+++ b/net/lapb/lapb_iface.c
@@ -407,7 +407,7 @@
return lapb->callbacks.data_indication(lapb->dev, skb);
kfree_skb(skb);
- return NET_RX_CN_HIGH; /* For now; must be != NET_RX_DROP */
+ return NET_RX_SUCCESS; /* For now; must be != NET_RX_DROP */
}
int lapb_data_transmit(struct lapb_cb *lapb, struct sk_buff *skb)
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 9208cf5..c45eee1 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -914,6 +914,7 @@
struct llc_sock *llc = llc_sk(sk);
int rc = 0;
+ memset(&sllc, 0, sizeof(sllc));
lock_sock(sk);
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c
index f97be47..be47ac427 100644
--- a/net/llc/llc_proc.c
+++ b/net/llc/llc_proc.c
@@ -143,7 +143,7 @@
return 0;
}
-static char *llc_conn_state_names[] = {
+static const char *const llc_conn_state_names[] = {
[LLC_CONN_STATE_ADM] = "adm",
[LLC_CONN_STATE_SETUP] = "setup",
[LLC_CONN_STATE_NORMAL] = "normal",
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 7836ee9..4d5543a 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -6,7 +6,6 @@
select CRYPTO_ARC4
select CRYPTO_AES
select CRC32
- select WIRELESS_EXT
---help---
This option enables the hardware independent IEEE 802.11
networking stack.
@@ -14,24 +13,7 @@
comment "CFG80211 needs to be enabled for MAC80211"
depends on CFG80211=n
-config MAC80211_DEFAULT_PS
- bool "enable powersave by default"
- depends on MAC80211
- default y
- help
- This option enables powersave mode by default.
-
- If this causes your applications to misbehave you should fix your
- applications instead -- they need to register their network
- latency requirement, see Documentation/power/pm_qos_interface.txt.
-
-config MAC80211_DEFAULT_PS_VALUE
- int
- default 1 if MAC80211_DEFAULT_PS
- default 0
-
-menu "Rate control algorithm selection"
- depends on MAC80211 != n
+if MAC80211 != n
config MAC80211_RC_PID
bool "PID controller based rate control algorithm" if EMBEDDED
@@ -78,17 +60,17 @@
default "pid" if MAC80211_RC_DEFAULT_PID
default ""
-endmenu
+endif
config MAC80211_MESH
bool "Enable mac80211 mesh networking (pre-802.11s) support"
depends on MAC80211 && EXPERIMENTAL
- depends on BROKEN
---help---
This options enables support of Draft 802.11s mesh networking.
- The implementation is based on Draft 1.08 of the Mesh Networking
- amendment. For more information visit http://o11s.org/.
-
+ The implementation is based on Draft 2.08 of the Mesh Networking
+ amendment. However, no compliance with that draft is claimed or even
+ possible, as drafts leave a number of identifiers to be defined after
+ ratification. For more information visit http://o11s.org/.
config MAC80211_LEDS
bool "Enable LED triggers"
@@ -222,3 +204,15 @@
and show them in debugfs.
If unsure, say N.
+
+config MAC80211_DRIVER_API_TRACER
+ bool "Driver API tracer"
+ depends on MAC80211_DEBUG_MENU
+ depends on EVENT_TRACING
+ help
+ Say Y here to make mac80211 register with the ftrace
+ framework for the driver API -- you can see which
+ driver methods it is calling then by looking at the
+ trace.
+
+ If unsure, say N.
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 0e3ab88..9f3cf71 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -3,7 +3,6 @@
# mac80211 objects
mac80211-y := \
main.o \
- wext.o \
sta_info.o \
wep.o \
wpa.o \
@@ -41,6 +40,9 @@
mac80211-$(CONFIG_PM) += pm.o
+mac80211-$(CONFIG_MAC80211_DRIVER_API_TRACER) += driver-trace.o
+CFLAGS_driver-trace.o := -I$(src)
+
# objects for PID algorithm
rc80211_pid-y := rc80211_pid_algo.o
rc80211_pid-$(CONFIG_MAC80211_DEBUGFS) += rc80211_pid_debugfs.o
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index a24e598..bd765f3 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -391,9 +391,6 @@
if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) {
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
- /* mark queue as pending, it is stopped already */
- __set_bit(IEEE80211_QUEUE_STOP_REASON_PENDING,
- &local->queue_stop_reasons[queue]);
/* copy over remaining packets */
skb_queue_splice_tail_init(
&sta->ampdu_mlme.tid_tx[tid]->pending,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 3f47276..5608f6c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -57,36 +57,21 @@
return 0;
}
-static int ieee80211_del_iface(struct wiphy *wiphy, int ifindex)
+static int ieee80211_del_iface(struct wiphy *wiphy, struct net_device *dev)
{
- struct net_device *dev;
- struct ieee80211_sub_if_data *sdata;
-
- /* we're under RTNL */
- dev = __dev_get_by_index(&init_net, ifindex);
- if (!dev)
- return -ENODEV;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- ieee80211_if_remove(sdata);
+ ieee80211_if_remove(IEEE80211_DEV_TO_SUB_IF(dev));
return 0;
}
-static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
+static int ieee80211_change_iface(struct wiphy *wiphy,
+ struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
- struct net_device *dev;
struct ieee80211_sub_if_data *sdata;
int ret;
- /* we're under RTNL */
- dev = __dev_get_by_index(&init_net, ifindex);
- if (!dev)
- return -ENODEV;
-
if (!nl80211_type_check(type))
return -EINVAL;
@@ -338,6 +323,8 @@
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ sinfo->generation = sdata->local->sta_generation;
+
sinfo->filled = STATION_INFO_INACTIVE_TIME |
STATION_INFO_RX_BYTES |
STATION_INFO_TX_BYTES |
@@ -924,6 +911,8 @@
else
memset(next_hop, 0, ETH_ALEN);
+ pinfo->generation = mesh_paths_generation;
+
pinfo->filled = MPATH_INFO_FRAME_QLEN |
MPATH_INFO_DSN |
MPATH_INFO_METRIC |
@@ -1177,123 +1166,29 @@
static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_auth_request *req)
{
- struct ieee80211_sub_if_data *sdata;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- switch (req->auth_type) {
- case NL80211_AUTHTYPE_OPEN_SYSTEM:
- sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_OPEN;
- break;
- case NL80211_AUTHTYPE_SHARED_KEY:
- sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_SHARED_KEY;
- break;
- case NL80211_AUTHTYPE_FT:
- sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_FT;
- break;
- case NL80211_AUTHTYPE_NETWORK_EAP:
- sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_LEAP;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- memcpy(sdata->u.mgd.bssid, req->peer_addr, ETH_ALEN);
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
- sdata->u.mgd.flags |= IEEE80211_STA_BSSID_SET;
-
- /* TODO: req->chan */
- sdata->u.mgd.flags |= IEEE80211_STA_AUTO_CHANNEL_SEL;
-
- if (req->ssid) {
- sdata->u.mgd.flags |= IEEE80211_STA_SSID_SET;
- memcpy(sdata->u.mgd.ssid, req->ssid, req->ssid_len);
- sdata->u.mgd.ssid_len = req->ssid_len;
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
- }
-
- kfree(sdata->u.mgd.sme_auth_ie);
- sdata->u.mgd.sme_auth_ie = NULL;
- sdata->u.mgd.sme_auth_ie_len = 0;
- if (req->ie) {
- sdata->u.mgd.sme_auth_ie = kmalloc(req->ie_len, GFP_KERNEL);
- if (sdata->u.mgd.sme_auth_ie == NULL)
- return -ENOMEM;
- memcpy(sdata->u.mgd.sme_auth_ie, req->ie, req->ie_len);
- sdata->u.mgd.sme_auth_ie_len = req->ie_len;
- }
-
- sdata->u.mgd.flags |= IEEE80211_STA_EXT_SME;
- sdata->u.mgd.state = IEEE80211_STA_MLME_DIRECT_PROBE;
- ieee80211_sta_req_auth(sdata);
- return 0;
+ return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req);
}
static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_assoc_request *req)
{
- struct ieee80211_sub_if_data *sdata;
- int ret;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (memcmp(sdata->u.mgd.bssid, req->peer_addr, ETH_ALEN) != 0 ||
- !(sdata->u.mgd.flags & IEEE80211_STA_AUTHENTICATED))
- return -ENOLINK; /* not authenticated */
-
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
- sdata->u.mgd.flags |= IEEE80211_STA_BSSID_SET;
-
- /* TODO: req->chan */
- sdata->u.mgd.flags |= IEEE80211_STA_AUTO_CHANNEL_SEL;
-
- if (req->ssid) {
- sdata->u.mgd.flags |= IEEE80211_STA_SSID_SET;
- memcpy(sdata->u.mgd.ssid, req->ssid, req->ssid_len);
- sdata->u.mgd.ssid_len = req->ssid_len;
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
- } else
- sdata->u.mgd.flags |= IEEE80211_STA_AUTO_SSID_SEL;
-
- ret = ieee80211_sta_set_extra_ie(sdata, req->ie, req->ie_len);
- if (ret && ret != -EALREADY)
- return ret;
-
- if (req->use_mfp) {
- sdata->u.mgd.mfp = IEEE80211_MFP_REQUIRED;
- sdata->u.mgd.flags |= IEEE80211_STA_MFP_ENABLED;
- } else {
- sdata->u.mgd.mfp = IEEE80211_MFP_DISABLED;
- sdata->u.mgd.flags &= ~IEEE80211_STA_MFP_ENABLED;
- }
-
- if (req->control_port)
- sdata->u.mgd.flags |= IEEE80211_STA_CONTROL_PORT;
- else
- sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
-
- sdata->u.mgd.flags |= IEEE80211_STA_EXT_SME;
- sdata->u.mgd.state = IEEE80211_STA_MLME_ASSOCIATE;
- ieee80211_sta_req_auth(sdata);
- return 0;
+ return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
}
static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_deauth_request *req)
+ struct cfg80211_deauth_request *req,
+ void *cookie)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- /* TODO: req->ie, req->peer_addr */
- return ieee80211_sta_deauthenticate(sdata, req->reason_code);
+ return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev),
+ req, cookie);
}
static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
- struct cfg80211_disassoc_request *req)
+ struct cfg80211_disassoc_request *req,
+ void *cookie)
{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- /* TODO: req->ie, req->peer_addr */
- return ieee80211_sta_disassociate(sdata, req->reason_code);
+ return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev),
+ req, cookie);
}
static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
@@ -1374,6 +1269,16 @@
return 0;
}
+static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
+ u8 *addr)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN);
+
+ return 0;
+}
+
static void ieee80211_rfkill_poll(struct wiphy *wiphy)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
@@ -1381,6 +1286,85 @@
drv_rfkill_poll(local);
}
+#ifdef CONFIG_NL80211_TESTMODE
+static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+
+ if (!local->ops->testmode_cmd)
+ return -EOPNOTSUPP;
+
+ return local->ops->testmode_cmd(&local->hw, data, len);
+}
+#endif
+
+static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
+ bool enabled, int timeout)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf = &local->hw.conf;
+
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
+ return -EOPNOTSUPP;
+
+ if (enabled == sdata->u.mgd.powersave &&
+ timeout == conf->dynamic_ps_timeout)
+ return 0;
+
+ sdata->u.mgd.powersave = enabled;
+ conf->dynamic_ps_timeout = timeout;
+
+ if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+
+ ieee80211_recalc_ps(local, -1);
+
+ return 0;
+}
+
+static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *addr,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ int i, err = -EINVAL;
+ u32 target_rate;
+ struct ieee80211_supported_band *sband;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+ /* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
+ * target_rate = X, rate->fixed = 1 means only rate X
+ * target_rate = X, rate->fixed = 0 means all rates <= X */
+ sdata->max_ratectrl_rateidx = -1;
+ sdata->force_unicast_rateidx = -1;
+
+ if (mask->fixed)
+ target_rate = mask->fixed / 100;
+ else if (mask->maxrate)
+ target_rate = mask->maxrate / 100;
+ else
+ return 0;
+
+ for (i=0; i< sband->n_bitrates; i++) {
+ struct ieee80211_rate *brate = &sband->bitrates[i];
+ int this_rate = brate->bitrate;
+
+ if (target_rate == this_rate) {
+ sdata->max_ratectrl_rateidx = i;
+ if (mask->fixed)
+ sdata->force_unicast_rateidx = i;
+ err = 0;
+ break;
+ }
+ }
+
+ return err;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -1422,5 +1406,9 @@
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
+ .set_wds_peer = ieee80211_set_wds_peer,
.rfkill_poll = ieee80211_rfkill_poll,
+ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
+ .set_power_mgmt = ieee80211_set_power_mgmt,
+ .set_bitrate_mask = ieee80211_set_bitrate_mask,
};
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 6c439cd..96991b6 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -175,7 +175,7 @@
for (q = 0; q < local->hw.queues; q++)
res += sprintf(buf + res, "%02d: %#.8lx/%d\n", q,
local->queue_stop_reasons[q],
- __netif_subqueue_stopped(local->mdev, q));
+ skb_queue_len(&local->pending[q]));
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
return simple_read_from_buffer(user_buf, count, ppos, buf, res);
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index e342032..61234e7 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -95,33 +95,9 @@
IEEE80211_IF_FILE(max_ratectrl_rateidx, max_ratectrl_rateidx, DEC);
/* STA attributes */
-IEEE80211_IF_FILE(state, u.mgd.state, DEC);
IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
-IEEE80211_IF_FILE(prev_bssid, u.mgd.prev_bssid, MAC);
-IEEE80211_IF_FILE(ssid_len, u.mgd.ssid_len, SIZE);
IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
-IEEE80211_IF_FILE(ap_capab, u.mgd.ap_capab, HEX);
IEEE80211_IF_FILE(capab, u.mgd.capab, HEX);
-IEEE80211_IF_FILE(extra_ie_len, u.mgd.extra_ie_len, SIZE);
-IEEE80211_IF_FILE(auth_tries, u.mgd.auth_tries, DEC);
-IEEE80211_IF_FILE(assoc_tries, u.mgd.assoc_tries, DEC);
-IEEE80211_IF_FILE(auth_algs, u.mgd.auth_algs, HEX);
-IEEE80211_IF_FILE(auth_alg, u.mgd.auth_alg, DEC);
-IEEE80211_IF_FILE(auth_transaction, u.mgd.auth_transaction, DEC);
-
-static ssize_t ieee80211_if_fmt_flags(
- const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
-{
- return scnprintf(buf, buflen, "%s%s%s%s%s%s%s\n",
- sdata->u.mgd.flags & IEEE80211_STA_SSID_SET ? "SSID\n" : "",
- sdata->u.mgd.flags & IEEE80211_STA_BSSID_SET ? "BSSID\n" : "",
- sdata->u.mgd.flags & IEEE80211_STA_PREV_BSSID_SET ? "prev BSSID\n" : "",
- sdata->u.mgd.flags & IEEE80211_STA_AUTHENTICATED ? "AUTH\n" : "",
- sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED ? "ASSOC\n" : "",
- sdata->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL ? "PROBEREQ POLL\n" : "",
- sdata->vif.bss_conf.use_cts_prot ? "CTS prot\n" : "");
-}
-__IEEE80211_IF_FILE(flags);
/* AP attributes */
IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC);
@@ -140,6 +116,8 @@
#ifdef CONFIG_MAC80211_MESH
/* Mesh stats attributes */
+IEEE80211_IF_FILE(fwded_mcast, u.mesh.mshstats.fwded_mcast, DEC);
+IEEE80211_IF_FILE(fwded_unicast, u.mesh.mshstats.fwded_unicast, DEC);
IEEE80211_IF_FILE(fwded_frames, u.mesh.mshstats.fwded_frames, DEC);
IEEE80211_IF_FILE(dropped_frames_ttl, u.mesh.mshstats.dropped_frames_ttl, DEC);
IEEE80211_IF_FILE(dropped_frames_no_route,
@@ -184,20 +162,9 @@
DEBUGFS_ADD(force_unicast_rateidx, sta);
DEBUGFS_ADD(max_ratectrl_rateidx, sta);
- DEBUGFS_ADD(state, sta);
DEBUGFS_ADD(bssid, sta);
- DEBUGFS_ADD(prev_bssid, sta);
- DEBUGFS_ADD(ssid_len, sta);
DEBUGFS_ADD(aid, sta);
- DEBUGFS_ADD(ap_capab, sta);
DEBUGFS_ADD(capab, sta);
- DEBUGFS_ADD(extra_ie_len, sta);
- DEBUGFS_ADD(auth_tries, sta);
- DEBUGFS_ADD(assoc_tries, sta);
- DEBUGFS_ADD(auth_algs, sta);
- DEBUGFS_ADD(auth_alg, sta);
- DEBUGFS_ADD(auth_transaction, sta);
- DEBUGFS_ADD(flags, sta);
}
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
@@ -240,6 +207,8 @@
{
sdata->mesh_stats_dir = debugfs_create_dir("mesh_stats",
sdata->debugfsdir);
+ MESHSTATS_ADD(fwded_mcast);
+ MESHSTATS_ADD(fwded_unicast);
MESHSTATS_ADD(fwded_frames);
MESHSTATS_ADD(dropped_frames_ttl);
MESHSTATS_ADD(dropped_frames_no_route);
@@ -317,20 +286,9 @@
DEBUGFS_DEL(force_unicast_rateidx, sta);
DEBUGFS_DEL(max_ratectrl_rateidx, sta);
- DEBUGFS_DEL(state, sta);
DEBUGFS_DEL(bssid, sta);
- DEBUGFS_DEL(prev_bssid, sta);
- DEBUGFS_DEL(ssid_len, sta);
DEBUGFS_DEL(aid, sta);
- DEBUGFS_DEL(ap_capab, sta);
DEBUGFS_DEL(capab, sta);
- DEBUGFS_DEL(extra_ie_len, sta);
- DEBUGFS_DEL(auth_tries, sta);
- DEBUGFS_DEL(assoc_tries, sta);
- DEBUGFS_DEL(auth_algs, sta);
- DEBUGFS_DEL(auth_alg, sta);
- DEBUGFS_DEL(auth_transaction, sta);
- DEBUGFS_DEL(flags, sta);
}
static void del_ap_files(struct ieee80211_sub_if_data *sdata)
@@ -373,6 +331,8 @@
static void del_mesh_stats(struct ieee80211_sub_if_data *sdata)
{
+ MESHSTATS_DEL(fwded_mcast);
+ MESHSTATS_DEL(fwded_unicast);
MESHSTATS_DEL(fwded_frames);
MESHSTATS_DEL(dropped_frames_ttl);
MESHSTATS_DEL(dropped_frames_no_route);
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 90230c7..33a2e89 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -120,45 +120,38 @@
static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- char buf[768], *p = buf;
+ char buf[30 + STA_TID_NUM * 70], *p = buf;
int i;
struct sta_info *sta = file->private_data;
- p += scnprintf(p, sizeof(buf)+buf-p, "Agg state for STA is:\n");
- p += scnprintf(p, sizeof(buf)+buf-p, " STA next dialog_token is %d \n "
- "TIDs info is: \n TID :",
- (sta->ampdu_mlme.dialog_token_allocator + 1));
- for (i = 0; i < STA_TID_NUM; i++)
- p += scnprintf(p, sizeof(buf)+buf-p, "%5d", i);
- p += scnprintf(p, sizeof(buf)+buf-p, "\n RX :");
- for (i = 0; i < STA_TID_NUM; i++)
- p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
- sta->ampdu_mlme.tid_state_rx[i]);
+ spin_lock_bh(&sta->lock);
+ p += scnprintf(p, sizeof(buf)+buf-p, "next dialog_token is %#02x\n",
+ sta->ampdu_mlme.dialog_token_allocator + 1);
+ for (i = 0; i < STA_TID_NUM; i++) {
+ p += scnprintf(p, sizeof(buf)+buf-p, "TID %02d:", i);
+ p += scnprintf(p, sizeof(buf)+buf-p, " RX=%x",
+ sta->ampdu_mlme.tid_state_rx[i]);
+ p += scnprintf(p, sizeof(buf)+buf-p, "/DTKN=%#.2x",
+ sta->ampdu_mlme.tid_state_rx[i] ?
+ sta->ampdu_mlme.tid_rx[i]->dialog_token : 0);
+ p += scnprintf(p, sizeof(buf)+buf-p, "/SSN=%#.3x",
+ sta->ampdu_mlme.tid_state_rx[i] ?
+ sta->ampdu_mlme.tid_rx[i]->ssn : 0);
- p += scnprintf(p, sizeof(buf)+buf-p, "\n DTKN:");
- for (i = 0; i < STA_TID_NUM; i++)
- p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
- sta->ampdu_mlme.tid_state_rx[i] ?
- sta->ampdu_mlme.tid_rx[i]->dialog_token : 0);
-
- p += scnprintf(p, sizeof(buf)+buf-p, "\n TX :");
- for (i = 0; i < STA_TID_NUM; i++)
- p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
- sta->ampdu_mlme.tid_state_tx[i]);
-
- p += scnprintf(p, sizeof(buf)+buf-p, "\n DTKN:");
- for (i = 0; i < STA_TID_NUM; i++)
- p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
- sta->ampdu_mlme.tid_state_tx[i] ?
- sta->ampdu_mlme.tid_tx[i]->dialog_token : 0);
-
- p += scnprintf(p, sizeof(buf)+buf-p, "\n SSN :");
- for (i = 0; i < STA_TID_NUM; i++)
- p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
- sta->ampdu_mlme.tid_state_tx[i] ?
- sta->ampdu_mlme.tid_tx[i]->ssn : 0);
-
- p += scnprintf(p, sizeof(buf)+buf-p, "\n");
+ p += scnprintf(p, sizeof(buf)+buf-p, " TX=%x",
+ sta->ampdu_mlme.tid_state_tx[i]);
+ p += scnprintf(p, sizeof(buf)+buf-p, "/DTKN=%#.2x",
+ sta->ampdu_mlme.tid_state_tx[i] ?
+ sta->ampdu_mlme.tid_tx[i]->dialog_token : 0);
+ p += scnprintf(p, sizeof(buf)+buf-p, "/SSN=%#.3x",
+ sta->ampdu_mlme.tid_state_tx[i] ?
+ sta->ampdu_mlme.tid_tx[i]->ssn : 0);
+ p += scnprintf(p, sizeof(buf)+buf-p, "/pending=%03d",
+ sta->ampdu_mlme.tid_state_tx[i] ?
+ skb_queue_len(&sta->ampdu_mlme.tid_tx[i]->pending) : 0);
+ p += scnprintf(p, sizeof(buf)+buf-p, "\n");
+ }
+ spin_unlock_bh(&sta->lock);
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
}
@@ -203,6 +196,22 @@
DEBUGFS_ADD(inactive_ms);
DEBUGFS_ADD(last_seq_ctrl);
DEBUGFS_ADD(agg_status);
+ DEBUGFS_ADD(dev);
+ DEBUGFS_ADD(rx_packets);
+ DEBUGFS_ADD(tx_packets);
+ DEBUGFS_ADD(rx_bytes);
+ DEBUGFS_ADD(tx_bytes);
+ DEBUGFS_ADD(rx_duplicates);
+ DEBUGFS_ADD(rx_fragments);
+ DEBUGFS_ADD(rx_dropped);
+ DEBUGFS_ADD(tx_fragments);
+ DEBUGFS_ADD(tx_filtered);
+ DEBUGFS_ADD(tx_retry_failed);
+ DEBUGFS_ADD(tx_retry_count);
+ DEBUGFS_ADD(last_signal);
+ DEBUGFS_ADD(last_qual);
+ DEBUGFS_ADD(last_noise);
+ DEBUGFS_ADD(wep_weak_iv_count);
}
void ieee80211_sta_debugfs_remove(struct sta_info *sta)
@@ -212,6 +221,23 @@
DEBUGFS_DEL(inactive_ms);
DEBUGFS_DEL(last_seq_ctrl);
DEBUGFS_DEL(agg_status);
+ DEBUGFS_DEL(aid);
+ DEBUGFS_DEL(dev);
+ DEBUGFS_DEL(rx_packets);
+ DEBUGFS_DEL(tx_packets);
+ DEBUGFS_DEL(rx_bytes);
+ DEBUGFS_DEL(tx_bytes);
+ DEBUGFS_DEL(rx_duplicates);
+ DEBUGFS_DEL(rx_fragments);
+ DEBUGFS_DEL(rx_dropped);
+ DEBUGFS_DEL(tx_fragments);
+ DEBUGFS_DEL(tx_filtered);
+ DEBUGFS_DEL(tx_retry_failed);
+ DEBUGFS_DEL(tx_retry_count);
+ DEBUGFS_DEL(last_signal);
+ DEBUGFS_DEL(last_qual);
+ DEBUGFS_DEL(last_noise);
+ DEBUGFS_DEL(wep_weak_iv_count);
debugfs_remove(sta->debugfs.dir);
sta->debugfs.dir = NULL;
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index b13446a..020a94a 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -3,6 +3,7 @@
#include <net/mac80211.h>
#include "ieee80211_i.h"
+#include "driver-trace.h"
static inline int drv_tx(struct ieee80211_local *local, struct sk_buff *skb)
{
@@ -11,29 +12,49 @@
static inline int drv_start(struct ieee80211_local *local)
{
- return local->ops->start(&local->hw);
+ int ret;
+
+ local->started = true;
+ smp_mb();
+ ret = local->ops->start(&local->hw);
+ trace_drv_start(local, ret);
+ return ret;
}
static inline void drv_stop(struct ieee80211_local *local)
{
local->ops->stop(&local->hw);
+ trace_drv_stop(local);
+
+ /* sync away all work on the tasklet before clearing started */
+ tasklet_disable(&local->tasklet);
+ tasklet_enable(&local->tasklet);
+
+ barrier();
+
+ local->started = false;
}
static inline int drv_add_interface(struct ieee80211_local *local,
struct ieee80211_if_init_conf *conf)
{
- return local->ops->add_interface(&local->hw, conf);
+ int ret = local->ops->add_interface(&local->hw, conf);
+ trace_drv_add_interface(local, conf->mac_addr, conf->vif, ret);
+ return ret;
}
static inline void drv_remove_interface(struct ieee80211_local *local,
struct ieee80211_if_init_conf *conf)
{
local->ops->remove_interface(&local->hw, conf);
+ trace_drv_remove_interface(local, conf->mac_addr, conf->vif);
}
static inline int drv_config(struct ieee80211_local *local, u32 changed)
{
- return local->ops->config(&local->hw, changed);
+ int ret = local->ops->config(&local->hw, changed);
+ trace_drv_config(local, changed, ret);
+ return ret;
}
static inline void drv_bss_info_changed(struct ieee80211_local *local,
@@ -43,24 +64,45 @@
{
if (local->ops->bss_info_changed)
local->ops->bss_info_changed(&local->hw, vif, info, changed);
+ trace_drv_bss_info_changed(local, vif, info, changed);
+}
+
+static inline u64 drv_prepare_multicast(struct ieee80211_local *local,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ u64 ret = 0;
+
+ if (local->ops->prepare_multicast)
+ ret = local->ops->prepare_multicast(&local->hw, mc_count,
+ mc_list);
+
+ trace_drv_prepare_multicast(local, mc_count, ret);
+
+ return ret;
}
static inline void drv_configure_filter(struct ieee80211_local *local,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count,
- struct dev_addr_list *mc_list)
+ u64 multicast)
{
+ might_sleep();
+
local->ops->configure_filter(&local->hw, changed_flags, total_flags,
- mc_count, mc_list);
+ multicast);
+ trace_drv_configure_filter(local, changed_flags, total_flags,
+ multicast);
}
static inline int drv_set_tim(struct ieee80211_local *local,
struct ieee80211_sta *sta, bool set)
{
+ int ret = 0;
if (local->ops->set_tim)
- return local->ops->set_tim(&local->hw, sta, set);
- return 0;
+ ret = local->ops->set_tim(&local->hw, sta, set);
+ trace_drv_set_tim(local, sta, set, ret);
+ return ret;
}
static inline int drv_set_key(struct ieee80211_local *local,
@@ -68,7 +110,9 @@
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
- return local->ops->set_key(&local->hw, cmd, vif, sta, key);
+ int ret = local->ops->set_key(&local->hw, cmd, vif, sta, key);
+ trace_drv_set_key(local, cmd, vif, sta, key, ret);
+ return ret;
}
static inline void drv_update_tkip_key(struct ieee80211_local *local,
@@ -79,32 +123,41 @@
if (local->ops->update_tkip_key)
local->ops->update_tkip_key(&local->hw, conf, address,
iv32, phase1key);
+ trace_drv_update_tkip_key(local, conf, address, iv32);
}
static inline int drv_hw_scan(struct ieee80211_local *local,
struct cfg80211_scan_request *req)
{
- return local->ops->hw_scan(&local->hw, req);
+ int ret = local->ops->hw_scan(&local->hw, req);
+ trace_drv_hw_scan(local, req, ret);
+ return ret;
}
static inline void drv_sw_scan_start(struct ieee80211_local *local)
{
if (local->ops->sw_scan_start)
local->ops->sw_scan_start(&local->hw);
+ trace_drv_sw_scan_start(local);
}
static inline void drv_sw_scan_complete(struct ieee80211_local *local)
{
if (local->ops->sw_scan_complete)
local->ops->sw_scan_complete(&local->hw);
+ trace_drv_sw_scan_complete(local);
}
static inline int drv_get_stats(struct ieee80211_local *local,
struct ieee80211_low_level_stats *stats)
{
- if (!local->ops->get_stats)
- return -EOPNOTSUPP;
- return local->ops->get_stats(&local->hw, stats);
+ int ret = -EOPNOTSUPP;
+
+ if (local->ops->get_stats)
+ ret = local->ops->get_stats(&local->hw, stats);
+ trace_drv_get_stats(local, stats, ret);
+
+ return ret;
}
static inline void drv_get_tkip_seq(struct ieee80211_local *local,
@@ -112,14 +165,17 @@
{
if (local->ops->get_tkip_seq)
local->ops->get_tkip_seq(&local->hw, hw_key_idx, iv32, iv16);
+ trace_drv_get_tkip_seq(local, hw_key_idx, iv32, iv16);
}
static inline int drv_set_rts_threshold(struct ieee80211_local *local,
u32 value)
{
+ int ret = 0;
if (local->ops->set_rts_threshold)
- return local->ops->set_rts_threshold(&local->hw, value);
- return 0;
+ ret = local->ops->set_rts_threshold(&local->hw, value);
+ trace_drv_set_rts_threshold(local, value, ret);
+ return ret;
}
static inline void drv_sta_notify(struct ieee80211_local *local,
@@ -129,46 +185,57 @@
{
if (local->ops->sta_notify)
local->ops->sta_notify(&local->hw, vif, cmd, sta);
+ trace_drv_sta_notify(local, vif, cmd, sta);
}
static inline int drv_conf_tx(struct ieee80211_local *local, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
+ int ret = -EOPNOTSUPP;
if (local->ops->conf_tx)
- return local->ops->conf_tx(&local->hw, queue, params);
- return -EOPNOTSUPP;
+ ret = local->ops->conf_tx(&local->hw, queue, params);
+ trace_drv_conf_tx(local, queue, params, ret);
+ return ret;
}
static inline int drv_get_tx_stats(struct ieee80211_local *local,
struct ieee80211_tx_queue_stats *stats)
{
- return local->ops->get_tx_stats(&local->hw, stats);
+ int ret = local->ops->get_tx_stats(&local->hw, stats);
+ trace_drv_get_tx_stats(local, stats, ret);
+ return ret;
}
static inline u64 drv_get_tsf(struct ieee80211_local *local)
{
+ u64 ret = -1ULL;
if (local->ops->get_tsf)
- return local->ops->get_tsf(&local->hw);
- return -1ULL;
+ ret = local->ops->get_tsf(&local->hw);
+ trace_drv_get_tsf(local, ret);
+ return ret;
}
static inline void drv_set_tsf(struct ieee80211_local *local, u64 tsf)
{
if (local->ops->set_tsf)
local->ops->set_tsf(&local->hw, tsf);
+ trace_drv_set_tsf(local, tsf);
}
static inline void drv_reset_tsf(struct ieee80211_local *local)
{
if (local->ops->reset_tsf)
local->ops->reset_tsf(&local->hw);
+ trace_drv_reset_tsf(local);
}
static inline int drv_tx_last_beacon(struct ieee80211_local *local)
{
+ int ret = 1;
if (local->ops->tx_last_beacon)
- return local->ops->tx_last_beacon(&local->hw);
- return 1;
+ ret = local->ops->tx_last_beacon(&local->hw);
+ trace_drv_tx_last_beacon(local, ret);
+ return ret;
}
static inline int drv_ampdu_action(struct ieee80211_local *local,
@@ -176,10 +243,12 @@
struct ieee80211_sta *sta, u16 tid,
u16 *ssn)
{
+ int ret = -EOPNOTSUPP;
if (local->ops->ampdu_action)
- return local->ops->ampdu_action(&local->hw, action,
- sta, tid, ssn);
- return -EOPNOTSUPP;
+ ret = local->ops->ampdu_action(&local->hw, action,
+ sta, tid, ssn);
+ trace_drv_ampdu_action(local, action, sta, tid, ssn, ret);
+ return ret;
}
diff --git a/net/mac80211/driver-trace.c b/net/mac80211/driver-trace.c
new file mode 100644
index 0000000..8ed8711
--- /dev/null
+++ b/net/mac80211/driver-trace.c
@@ -0,0 +1,9 @@
+/* bug in tracepoint.h, it should include this */
+#include <linux/module.h>
+
+/* sparse isn't too happy with all macros... */
+#ifndef __CHECKER__
+#include "driver-ops.h"
+#define CREATE_TRACE_POINTS
+#include "driver-trace.h"
+#endif
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
new file mode 100644
index 0000000..37b9051
--- /dev/null
+++ b/net/mac80211/driver-trace.h
@@ -0,0 +1,672 @@
+#if !defined(__MAC80211_DRIVER_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __MAC80211_DRIVER_TRACE
+
+#include <linux/tracepoint.h>
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+#if !defined(CONFIG_MAC80211_DRIVER_API_TRACER) || defined(__CHECKER__)
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, ...) \
+static inline void trace_ ## name(proto) {}
+#endif
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mac80211
+
+#define MAXNAME 32
+#define LOCAL_ENTRY __array(char, wiphy_name, 32)
+#define LOCAL_ASSIGN strlcpy(__entry->wiphy_name, wiphy_name(local->hw.wiphy), MAXNAME)
+#define LOCAL_PR_FMT "%s"
+#define LOCAL_PR_ARG __entry->wiphy_name
+
+#define STA_ENTRY __array(char, sta_addr, ETH_ALEN)
+#define STA_ASSIGN (sta ? memcpy(__entry->sta_addr, sta->addr, ETH_ALEN) : memset(__entry->sta_addr, 0, ETH_ALEN))
+#define STA_PR_FMT " sta:%pM"
+#define STA_PR_ARG __entry->sta_addr
+
+#define VIF_ENTRY __field(enum nl80211_iftype, vif_type) __field(void *, vif)
+#define VIF_ASSIGN __entry->vif_type = vif ? vif->type : 0; __entry->vif = vif
+#define VIF_PR_FMT " vif:%p(%d)"
+#define VIF_PR_ARG __entry->vif, __entry->vif_type
+
+TRACE_EVENT(drv_start,
+ TP_PROTO(struct ieee80211_local *local, int ret),
+
+ TP_ARGS(local, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(drv_stop,
+ TP_PROTO(struct ieee80211_local *local),
+
+ TP_ARGS(local),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(drv_add_interface,
+ TP_PROTO(struct ieee80211_local *local,
+ const u8 *addr,
+ struct ieee80211_vif *vif,
+ int ret),
+
+ TP_ARGS(local, addr, vif, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ __array(char, addr, 6)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ memcpy(__entry->addr, addr, 6);
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " addr:%pM ret:%d",
+ LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_remove_interface,
+ TP_PROTO(struct ieee80211_local *local,
+ const u8 *addr, struct ieee80211_vif *vif),
+
+ TP_ARGS(local, addr, vif),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ __array(char, addr, 6)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ memcpy(__entry->addr, addr, 6);
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " addr:%pM",
+ LOCAL_PR_ARG, VIF_PR_ARG, __entry->addr
+ )
+);
+
+TRACE_EVENT(drv_config,
+ TP_PROTO(struct ieee80211_local *local,
+ u32 changed,
+ int ret),
+
+ TP_ARGS(local, changed, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u32, changed)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->changed = changed;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " ch:%#x ret:%d",
+ LOCAL_PR_ARG, __entry->changed, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_bss_info_changed,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info,
+ u32 changed),
+
+ TP_ARGS(local, vif, info, changed),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ __field(bool, assoc)
+ __field(u16, aid)
+ __field(bool, cts)
+ __field(bool, shortpre)
+ __field(bool, shortslot)
+ __field(u8, dtimper)
+ __field(u16, bcnint)
+ __field(u16, assoc_cap)
+ __field(u64, timestamp)
+ __field(u32, basic_rates)
+ __field(u32, changed)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ __entry->changed = changed;
+ __entry->aid = info->aid;
+ __entry->assoc = info->assoc;
+ __entry->shortpre = info->use_short_preamble;
+ __entry->cts = info->use_cts_prot;
+ __entry->shortslot = info->use_short_slot;
+ __entry->dtimper = info->dtim_period;
+ __entry->bcnint = info->beacon_int;
+ __entry->assoc_cap = info->assoc_capability;
+ __entry->timestamp = info->timestamp;
+ __entry->basic_rates = info->basic_rates;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " changed:%#x",
+ LOCAL_PR_ARG, VIF_PR_ARG, __entry->changed
+ )
+);
+
+TRACE_EVENT(drv_prepare_multicast,
+ TP_PROTO(struct ieee80211_local *local, int mc_count, u64 ret),
+
+ TP_ARGS(local, mc_count, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(int, mc_count)
+ __field(u64, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->mc_count = mc_count;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " prepare mc (%d): %llx",
+ LOCAL_PR_ARG, __entry->mc_count,
+ (unsigned long long) __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_configure_filter,
+ TP_PROTO(struct ieee80211_local *local,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast),
+
+ TP_ARGS(local, changed_flags, total_flags, multicast),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(unsigned int, changed)
+ __field(unsigned int, total)
+ __field(u64, multicast)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->changed = changed_flags;
+ __entry->total = *total_flags;
+ __entry->multicast = multicast;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " changed:%#x total:%#x",
+ LOCAL_PR_ARG, __entry->changed, __entry->total
+ )
+);
+
+TRACE_EVENT(drv_set_tim,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sta *sta, bool set, int ret),
+
+ TP_ARGS(local, sta, set, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ STA_ENTRY
+ __field(bool, set)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ STA_ASSIGN;
+ __entry->set = set;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT STA_PR_FMT " set:%d ret:%d",
+ LOCAL_PR_ARG, STA_PR_FMT, __entry->set, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_set_key,
+ TP_PROTO(struct ieee80211_local *local,
+ enum set_key_cmd cmd, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key, int ret),
+
+ TP_ARGS(local, cmd, vif, sta, key, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ STA_ENTRY
+ __field(enum ieee80211_key_alg, alg)
+ __field(u8, hw_key_idx)
+ __field(u8, flags)
+ __field(s8, keyidx)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ STA_ASSIGN;
+ __entry->alg = key->alg;
+ __entry->flags = key->flags;
+ __entry->keyidx = key->keyidx;
+ __entry->hw_key_idx = key->hw_key_idx;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " ret:%d",
+ LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_update_tkip_key,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_key_conf *conf,
+ const u8 *address, u32 iv32),
+
+ TP_ARGS(local, conf, address, iv32),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __array(u8, addr, 6)
+ __field(u32, iv32)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ memcpy(__entry->addr, address, 6);
+ __entry->iv32 = iv32;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " addr:%pM iv32:%#x",
+ LOCAL_PR_ARG, __entry->addr, __entry->iv32
+ )
+);
+
+TRACE_EVENT(drv_hw_scan,
+ TP_PROTO(struct ieee80211_local *local,
+ struct cfg80211_scan_request *req, int ret),
+
+ TP_ARGS(local, req, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " ret:%d",
+ LOCAL_PR_ARG, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_sw_scan_start,
+ TP_PROTO(struct ieee80211_local *local),
+
+ TP_ARGS(local),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(drv_sw_scan_complete,
+ TP_PROTO(struct ieee80211_local *local),
+
+ TP_ARGS(local),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(drv_get_stats,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_low_level_stats *stats,
+ int ret),
+
+ TP_ARGS(local, stats, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(int, ret)
+ __field(unsigned int, ackfail)
+ __field(unsigned int, rtsfail)
+ __field(unsigned int, fcserr)
+ __field(unsigned int, rtssucc)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ __entry->ackfail = stats->dot11ACKFailureCount;
+ __entry->rtsfail = stats->dot11RTSFailureCount;
+ __entry->fcserr = stats->dot11FCSErrorCount;
+ __entry->rtssucc = stats->dot11RTSSuccessCount;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " ret:%d",
+ LOCAL_PR_ARG, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_get_tkip_seq,
+ TP_PROTO(struct ieee80211_local *local,
+ u8 hw_key_idx, u32 *iv32, u16 *iv16),
+
+ TP_ARGS(local, hw_key_idx, iv32, iv16),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u8, hw_key_idx)
+ __field(u32, iv32)
+ __field(u16, iv16)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->hw_key_idx = hw_key_idx;
+ __entry->iv32 = *iv32;
+ __entry->iv16 = *iv16;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(drv_set_rts_threshold,
+ TP_PROTO(struct ieee80211_local *local, u32 value, int ret),
+
+ TP_ARGS(local, value, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u32, value)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ __entry->value = value;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " value:%d ret:%d",
+ LOCAL_PR_ARG, __entry->value, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_sta_notify,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_vif *vif,
+ enum sta_notify_cmd cmd,
+ struct ieee80211_sta *sta),
+
+ TP_ARGS(local, vif, cmd, sta),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ STA_ENTRY
+ __field(u32, cmd)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ STA_ASSIGN;
+ __entry->cmd = cmd;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " cmd:%d",
+ LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->cmd
+ )
+);
+
+TRACE_EVENT(drv_conf_tx,
+ TP_PROTO(struct ieee80211_local *local, u16 queue,
+ const struct ieee80211_tx_queue_params *params,
+ int ret),
+
+ TP_ARGS(local, queue, params, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u16, queue)
+ __field(u16, txop)
+ __field(u16, cw_min)
+ __field(u16, cw_max)
+ __field(u8, aifs)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->queue = queue;
+ __entry->ret = ret;
+ __entry->txop = params->txop;
+ __entry->cw_max = params->cw_max;
+ __entry->cw_min = params->cw_min;
+ __entry->aifs = params->aifs;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " queue:%d ret:%d",
+ LOCAL_PR_ARG, __entry->queue, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_get_tx_stats,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_tx_queue_stats *stats,
+ int ret),
+
+ TP_ARGS(local, stats, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " ret:%d",
+ LOCAL_PR_ARG, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_get_tsf,
+ TP_PROTO(struct ieee80211_local *local, u64 ret),
+
+ TP_ARGS(local, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u64, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " ret:%llu",
+ LOCAL_PR_ARG, (unsigned long long)__entry->ret
+ )
+);
+
+TRACE_EVENT(drv_set_tsf,
+ TP_PROTO(struct ieee80211_local *local, u64 tsf),
+
+ TP_ARGS(local, tsf),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(u64, tsf)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->tsf = tsf;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " tsf:%llu",
+ LOCAL_PR_ARG, (unsigned long long)__entry->tsf
+ )
+);
+
+TRACE_EVENT(drv_reset_tsf,
+ TP_PROTO(struct ieee80211_local *local),
+
+ TP_ARGS(local),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT, LOCAL_PR_ARG
+ )
+);
+
+TRACE_EVENT(drv_tx_last_beacon,
+ TP_PROTO(struct ieee80211_local *local, int ret),
+
+ TP_ARGS(local, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ __entry->ret = ret;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT " ret:%d",
+ LOCAL_PR_ARG, __entry->ret
+ )
+);
+
+TRACE_EVENT(drv_ampdu_action,
+ TP_PROTO(struct ieee80211_local *local,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid,
+ u16 *ssn, int ret),
+
+ TP_ARGS(local, action, sta, tid, ssn, ret),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ STA_ENTRY
+ __field(u32, action)
+ __field(u16, tid)
+ __field(u16, ssn)
+ __field(int, ret)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ STA_ASSIGN;
+ __entry->ret = ret;
+ __entry->action = action;
+ __entry->tid = tid;
+ __entry->ssn = *ssn;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT STA_PR_FMT " action:%d tid:%d ret:%d",
+ LOCAL_PR_ARG, STA_PR_ARG, __entry->action, __entry->tid, __entry->ret
+ )
+);
+#endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE driver-trace
+#include <trace/define_trace.h>
diff --git a/net/mac80211/event.c b/net/mac80211/event.c
index f288d01..01ae759 100644
--- a/net/mac80211/event.c
+++ b/net/mac80211/event.c
@@ -7,8 +7,7 @@
*
* mac80211 - events
*/
-
-#include <net/iw_handler.h>
+#include <net/cfg80211.h>
#include "ieee80211_i.h"
/*
@@ -17,26 +16,12 @@
* driver or is still in the frame), it should provide that information.
*/
void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
- struct ieee80211_hdr *hdr, const u8 *tsc)
+ struct ieee80211_hdr *hdr, const u8 *tsc,
+ gfp_t gfp)
{
- union iwreq_data wrqu;
- char *buf = kmalloc(128, GFP_ATOMIC);
-
- if (buf) {
- /* TODO: needed parameters: count, key type, TSC */
- sprintf(buf, "MLME-MICHAELMICFAILURE.indication("
- "keyid=%d %scast addr=%pM)",
- keyidx, hdr->addr1[0] & 0x01 ? "broad" : "uni",
- hdr->addr2);
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = strlen(buf);
- wireless_send_event(sdata->dev, IWEVCUSTOM, &wrqu, buf);
- kfree(buf);
- }
-
cfg80211_michael_mic_failure(sdata->dev, hdr->addr2,
(hdr->addr1[0] & 0x01) ?
NL80211_KEYTYPE_GROUP :
NL80211_KEYTYPE_PAIRWISE,
- keyidx, tsc);
+ keyidx, tsc, gfp);
}
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 0b30277..920ec87 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -57,7 +57,7 @@
*/
if (auth_alg == WLAN_AUTH_OPEN && auth_transaction == 1)
ieee80211_send_auth(sdata, 2, WLAN_AUTH_OPEN, NULL, 0,
- sdata->u.ibss.bssid, 0);
+ sdata->u.ibss.bssid, NULL, 0, 0);
}
static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
@@ -494,7 +494,7 @@
capability = WLAN_CAPABILITY_IBSS;
- if (sdata->default_key)
+ if (ifibss->privacy)
capability |= WLAN_CAPABILITY_PRIVACY;
else
sdata->drop_unencrypted = 0;
@@ -524,9 +524,8 @@
return;
capability = WLAN_CAPABILITY_IBSS;
- if (sdata->default_key)
+ if (ifibss->privacy)
capability |= WLAN_CAPABILITY_PRIVACY;
-
if (ifibss->fixed_bssid)
bssid = ifibss->bssid;
if (ifibss->fixed_channel)
@@ -705,7 +704,7 @@
struct ieee80211_mgmt *mgmt;
u16 fc;
- rx_status = (struct ieee80211_rx_status *) skb->cb;
+ rx_status = IEEE80211_SKB_RXCB(skb);
mgmt = (struct ieee80211_mgmt *) skb->data;
fc = le16_to_cpu(mgmt->frame_control);
@@ -743,7 +742,7 @@
if (!netif_running(sdata->dev))
return;
- if (local->sw_scanning || local->hw_scanning)
+ if (local->scanning)
return;
if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_ADHOC))
@@ -782,7 +781,7 @@
}
set_bit(IEEE80211_IBSS_REQ_RUN, &ifibss->request);
- queue_work(local->hw.workqueue, &ifibss->work);
+ ieee80211_queue_work(&local->hw, &ifibss->work);
}
#ifdef CONFIG_PM
@@ -836,8 +835,7 @@
}
ieee80211_rx_result
-ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status)
+ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_mgmt *mgmt;
@@ -852,11 +850,10 @@
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
- memcpy(skb->cb, rx_status, sizeof(*rx_status));
case IEEE80211_STYPE_PROBE_REQ:
case IEEE80211_STYPE_AUTH:
skb_queue_tail(&sdata->u.ibss.skb_queue, skb);
- queue_work(local->hw.workqueue, &sdata->u.ibss.work);
+ ieee80211_queue_work(&local->hw, &sdata->u.ibss.work);
return RX_QUEUED;
}
@@ -874,6 +871,8 @@
} else
sdata->u.ibss.fixed_bssid = false;
+ sdata->u.ibss.privacy = params->privacy;
+
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
sdata->u.ibss.channel = params->channel;
@@ -913,7 +912,7 @@
ieee80211_recalc_idle(sdata->local);
set_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
- queue_work(sdata->local->hw.workqueue, &sdata->u.ibss.work);
+ ieee80211_queue_work(&sdata->local->hw, &sdata->u.ibss.work);
return 0;
}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 68eb505..588005c8 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -24,7 +24,6 @@
#include <linux/spinlock.h>
#include <linux/etherdevice.h>
#include <net/cfg80211.h>
-#include <net/iw_handler.h>
#include <net/mac80211.h>
#include "key.h"
#include "sta_info.h"
@@ -213,7 +212,9 @@
};
struct mesh_stats {
- __u32 fwded_frames; /* Mesh forwarded frames */
+ __u32 fwded_mcast; /* Mesh forwarded multicast frames */
+ __u32 fwded_unicast; /* Mesh forwarded unicast frames */
+ __u32 fwded_frames; /* Mesh total forwarded frames */
__u32 dropped_frames_ttl; /* Not transmitted since mesh_ttl == 0*/
__u32 dropped_frames_no_route; /* Not transmitted, no route found */
atomic_t estab_plinks;
@@ -227,86 +228,81 @@
u8 flags;
};
-/* flags used in struct ieee80211_if_managed.flags */
-#define IEEE80211_STA_SSID_SET BIT(0)
-#define IEEE80211_STA_BSSID_SET BIT(1)
-#define IEEE80211_STA_PREV_BSSID_SET BIT(2)
-#define IEEE80211_STA_AUTHENTICATED BIT(3)
-#define IEEE80211_STA_ASSOCIATED BIT(4)
-#define IEEE80211_STA_PROBEREQ_POLL BIT(5)
-#define IEEE80211_STA_CREATE_IBSS BIT(6)
-#define IEEE80211_STA_CONTROL_PORT BIT(7)
-#define IEEE80211_STA_WMM_ENABLED BIT(8)
-/* hole at 9, please re-use */
-#define IEEE80211_STA_AUTO_SSID_SEL BIT(10)
-#define IEEE80211_STA_AUTO_BSSID_SEL BIT(11)
-#define IEEE80211_STA_AUTO_CHANNEL_SEL BIT(12)
-#define IEEE80211_STA_PRIVACY_INVOKED BIT(13)
-#define IEEE80211_STA_TKIP_WEP_USED BIT(14)
-#define IEEE80211_STA_CSA_RECEIVED BIT(15)
-#define IEEE80211_STA_MFP_ENABLED BIT(16)
-#define IEEE80211_STA_EXT_SME BIT(17)
-/* flags for MLME request */
-#define IEEE80211_STA_REQ_SCAN 0
-#define IEEE80211_STA_REQ_AUTH 1
-#define IEEE80211_STA_REQ_RUN 2
+enum ieee80211_mgd_state {
+ IEEE80211_MGD_STATE_IDLE,
+ IEEE80211_MGD_STATE_PROBE,
+ IEEE80211_MGD_STATE_AUTH,
+ IEEE80211_MGD_STATE_ASSOC,
+};
-/* bitfield of allowed auth algs */
-#define IEEE80211_AUTH_ALG_OPEN BIT(0)
-#define IEEE80211_AUTH_ALG_SHARED_KEY BIT(1)
-#define IEEE80211_AUTH_ALG_LEAP BIT(2)
-#define IEEE80211_AUTH_ALG_FT BIT(3)
+struct ieee80211_mgd_work {
+ struct list_head list;
+ struct ieee80211_bss *bss;
+ int ie_len;
+ u8 prev_bssid[ETH_ALEN];
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+ unsigned long timeout;
+ enum ieee80211_mgd_state state;
+ u16 auth_alg, auth_transaction;
+
+ int tries;
+
+ u8 key[WLAN_KEY_LEN_WEP104];
+ u8 key_len, key_idx;
+
+ /* must be last */
+ u8 ie[0]; /* for auth or assoc frame, not probe */
+};
+
+/* flags used in struct ieee80211_if_managed.flags */
+enum ieee80211_sta_flags {
+ IEEE80211_STA_BEACON_POLL = BIT(0),
+ IEEE80211_STA_CONNECTION_POLL = BIT(1),
+ IEEE80211_STA_CONTROL_PORT = BIT(2),
+ IEEE80211_STA_WMM_ENABLED = BIT(3),
+ IEEE80211_STA_DISABLE_11N = BIT(4),
+ IEEE80211_STA_CSA_RECEIVED = BIT(5),
+ IEEE80211_STA_MFP_ENABLED = BIT(6),
+};
+
+/* flags for MLME request */
+enum ieee80211_sta_request {
+ IEEE80211_STA_REQ_SCAN,
+};
struct ieee80211_if_managed {
struct timer_list timer;
+ struct timer_list conn_mon_timer;
+ struct timer_list bcn_mon_timer;
struct timer_list chswitch_timer;
struct work_struct work;
+ struct work_struct monitor_work;
struct work_struct chswitch_work;
struct work_struct beacon_loss_work;
- u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
+ unsigned long probe_timeout;
+ int probe_send_count;
- u8 ssid[IEEE80211_MAX_SSID_LEN];
- size_t ssid_len;
+ struct mutex mtx;
+ struct ieee80211_bss *associated;
+ struct ieee80211_mgd_work *old_associate_work;
+ struct list_head work_list;
- enum {
- IEEE80211_STA_MLME_DISABLED,
- IEEE80211_STA_MLME_DIRECT_PROBE,
- IEEE80211_STA_MLME_AUTHENTICATE,
- IEEE80211_STA_MLME_ASSOCIATE,
- IEEE80211_STA_MLME_ASSOCIATED,
- } state;
+ u8 bssid[ETH_ALEN];
u16 aid;
- u16 ap_capab, capab;
- u8 *extra_ie; /* to be added to the end of AssocReq */
- size_t extra_ie_len;
-
- /* The last AssocReq/Resp IEs */
- u8 *assocreq_ies, *assocresp_ies;
- size_t assocreq_ies_len, assocresp_ies_len;
+ u16 capab;
struct sk_buff_head skb_queue;
- int assoc_scan_tries; /* number of scans done pre-association */
- int direct_probe_tries; /* retries for direct probes */
- int auth_tries; /* retries for auth req */
- int assoc_tries; /* retries for assoc req */
-
unsigned long timers_running; /* used for quiesce/restart */
bool powersave; /* powersave requested for this iface */
unsigned long request;
- unsigned long last_probe;
- unsigned long last_beacon;
-
unsigned int flags;
- unsigned int auth_algs; /* bitfield of allowed auth algs */
- int auth_alg; /* currently used IEEE 802.11 authentication algorithm */
- int auth_transaction;
-
u32 beacon_crc;
enum {
@@ -316,10 +312,6 @@
} mfp; /* management frame protection */
int wmm_last_param_set;
-
- /* Extra IE data for management frames */
- u8 *sme_auth_ie;
- size_t sme_auth_ie_len;
};
enum ieee80211_ibss_request {
@@ -339,6 +331,7 @@
bool fixed_bssid;
bool fixed_channel;
+ bool privacy;
u8 bssid[ETH_ALEN];
u8 ssid[IEEE80211_MAX_SSID_LEN];
@@ -364,7 +357,7 @@
unsigned long timers_running;
- bool housekeeping;
+ unsigned long wrkq_flags;
u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN];
size_t mesh_id_len;
@@ -374,6 +367,10 @@
u8 mesh_pm_id[4];
/* Congestion Control Mode Identifier */
u8 mesh_cc_id[4];
+ /* Synchronization Protocol Identifier */
+ u8 mesh_sp_id[4];
+ /* Authentication Protocol Identifier */
+ u8 mesh_auth_id[4];
/* Local mesh Destination Sequence Number */
u32 dsn;
/* Last used PREQ ID */
@@ -478,20 +475,9 @@
union {
struct {
struct dentry *drop_unencrypted;
- struct dentry *state;
struct dentry *bssid;
- struct dentry *prev_bssid;
- struct dentry *ssid_len;
struct dentry *aid;
- struct dentry *ap_capab;
struct dentry *capab;
- struct dentry *extra_ie_len;
- struct dentry *auth_tries;
- struct dentry *assoc_tries;
- struct dentry *auth_algs;
- struct dentry *auth_alg;
- struct dentry *auth_transaction;
- struct dentry *flags;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
} sta;
@@ -526,6 +512,8 @@
#ifdef CONFIG_MAC80211_MESH
struct dentry *mesh_stats_dir;
struct {
+ struct dentry *fwded_mcast;
+ struct dentry *fwded_unicast;
struct dentry *fwded_frames;
struct dentry *dropped_frames_ttl;
struct dentry *dropped_frames_no_route;
@@ -588,12 +576,44 @@
IEEE80211_QUEUE_STOP_REASON_CSA,
IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
IEEE80211_QUEUE_STOP_REASON_SUSPEND,
- IEEE80211_QUEUE_STOP_REASON_PENDING,
IEEE80211_QUEUE_STOP_REASON_SKB_ADD,
};
-struct ieee80211_master_priv {
- struct ieee80211_local *local;
+/**
+ * mac80211 scan flags - currently active scan mode
+ *
+ * @SCAN_SW_SCANNING: We're currently in the process of scanning but may as
+ * well be on the operating channel
+ * @SCAN_HW_SCANNING: The hardware is scanning for us, we have no way to
+ * determine if we are on the operating channel or not
+ * @SCAN_OFF_CHANNEL: We're off our operating channel for scanning,
+ * gets only set in conjunction with SCAN_SW_SCANNING
+ */
+enum {
+ SCAN_SW_SCANNING,
+ SCAN_HW_SCANNING,
+ SCAN_OFF_CHANNEL,
+};
+
+/**
+ * enum mac80211_scan_state - scan state machine states
+ *
+ * @SCAN_DECISION: Main entry point to the scan state machine, this state
+ * determines if we should keep on scanning or switch back to the
+ * operating channel
+ * @SCAN_SET_CHANNEL: Set the next channel to be scanned
+ * @SCAN_SEND_PROBE: Send probe requests and wait for probe responses
+ * @SCAN_LEAVE_OPER_CHANNEL: Leave the operating channel, notify the AP
+ * about us leaving the channel and stop all associated STA interfaces
+ * @SCAN_ENTER_OPER_CHANNEL: Enter the operating channel again, notify the
+ * AP about us being back and restart all associated STA interfaces
+ */
+enum mac80211_scan_state {
+ SCAN_DECISION,
+ SCAN_SET_CHANNEL,
+ SCAN_SEND_PROBE,
+ SCAN_LEAVE_OPER_CHANNEL,
+ SCAN_ENTER_OPER_CHANNEL,
};
struct ieee80211_local {
@@ -604,17 +624,33 @@
const struct ieee80211_ops *ops;
+ /*
+ * private workqueue to mac80211. mac80211 makes this accessible
+ * via ieee80211_queue_work()
+ */
+ struct workqueue_struct *workqueue;
+
unsigned long queue_stop_reasons[IEEE80211_MAX_QUEUES];
/* also used to protect ampdu_ac_queue and amdpu_ac_stop_refcnt */
spinlock_t queue_stop_reason_lock;
- struct net_device *mdev; /* wmaster# - "master" 802.11 device */
int open_count;
int monitors, cooked_mntrs;
/* number of interfaces with corresponding FIF_ flags */
- int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss;
+ int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss, fif_pspoll;
unsigned int filter_flags; /* FIF_* */
struct iw_statistics wstats;
+
+ /* protects the aggregated multicast list and filter calls */
+ spinlock_t filter_lock;
+
+ /* used for uploading changed mc list */
+ struct work_struct reconfig_filter;
+
+ /* aggregated multicast list */
+ struct dev_addr_list *mc_list;
+ int mc_count;
+
bool tim_in_locked_section; /* see ieee80211_beacon_get() */
/*
@@ -631,6 +667,9 @@
*/
bool quiescing;
+ /* device is started */
+ bool started;
+
int tx_headroom; /* required headroom for hardware/radiotap */
/* Tasklet and skb queue to process calls from IRQ mode. All frames
@@ -653,6 +692,7 @@
struct list_head sta_list;
struct sta_info *sta_hash[STA_HASH_SIZE];
struct timer_list sta_cleanup;
+ int sta_generation;
struct sk_buff_head pending[IEEE80211_MAX_QUEUES];
struct tasklet_struct tx_pending_tasklet;
@@ -687,9 +727,9 @@
/* Scanning and BSS list */
struct mutex scan_mtx;
- bool sw_scanning, hw_scanning;
+ unsigned long scanning;
struct cfg80211_ssid scan_ssid;
- struct cfg80211_scan_request int_scan_req;
+ struct cfg80211_scan_request *int_scan_req;
struct cfg80211_scan_request *scan_req;
struct ieee80211_channel *scan_channel;
const u8 *orig_ies;
@@ -697,7 +737,7 @@
int scan_channel_idx;
int scan_ies_len;
- enum { SCAN_SET_CHANNEL, SCAN_SEND_PROBE } scan_state;
+ enum mac80211_scan_state next_scan_state;
struct delayed_work scan_work;
struct ieee80211_sub_if_data *scan_sdata;
enum nl80211_channel_type oper_channel_type;
@@ -834,10 +874,6 @@
static inline struct ieee80211_sub_if_data *
IEEE80211_DEV_TO_SUB_IF(struct net_device *dev)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-
- BUG_ON(!local || local->mdev == dev);
-
return netdev_priv(dev);
}
@@ -937,21 +973,20 @@
void ieee80211_configure_filter(struct ieee80211_local *local);
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
-/* wireless extensions */
-extern const struct iw_handler_def ieee80211_iw_handler_def;
-
/* STA code */
void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata);
+int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_auth_request *req);
+int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_assoc_request *req);
+int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_deauth_request *req,
+ void *cookie);
+int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_disassoc_request *req,
+ void *cookie);
ieee80211_rx_result ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status);
-int ieee80211_sta_commit(struct ieee80211_sub_if_data *sdata);
-int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len);
-int ieee80211_sta_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len);
-int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid);
-void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata);
-int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason);
-int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason);
+ struct sk_buff *skb);
void ieee80211_send_pspoll(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency);
@@ -967,8 +1002,7 @@
void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata);
ieee80211_rx_result
-ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status);
+ieee80211_ibss_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
u8 *bssid, u8 *addr, u32 supp_rates);
int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
@@ -983,16 +1017,9 @@
const u8 *ssid, u8 ssid_len);
int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
struct cfg80211_scan_request *req);
-int ieee80211_scan_results(struct ieee80211_local *local,
- struct iw_request_info *info,
- char *buf, size_t len);
void ieee80211_scan_cancel(struct ieee80211_local *local);
ieee80211_rx_result
-ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status);
-int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
- const char *ie, size_t len);
+ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local);
struct ieee80211_bss *
@@ -1008,8 +1035,6 @@
u8 *ssid, u8 ssid_len);
void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss);
-void ieee80211_rx_bss_remove(struct ieee80211_sub_if_data *sdata, u8 *bssid,
- int freq, u8 *ssid, u8 ssid_len);
/* interface handling */
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
@@ -1025,9 +1050,10 @@
/* tx handling */
void ieee80211_clear_tx_pending(struct ieee80211_local *local);
void ieee80211_tx_pending(unsigned long data);
-int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev);
-int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev);
-int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
+netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
/* HT */
void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
@@ -1065,6 +1091,7 @@
/* Suspend/resume and hw reconfiguration */
int ieee80211_reconfig(struct ieee80211_local *local);
+void ieee80211_stop_device(struct ieee80211_local *local);
#ifdef CONFIG_PM
int __ieee80211_suspend(struct ieee80211_hw *hw);
@@ -1092,7 +1119,8 @@
int ieee80211_frame_duration(struct ieee80211_local *local, size_t len,
int rate, int erp, int short_preamble);
void mac80211_ev_michael_mic_failure(struct ieee80211_sub_if_data *sdata, int keyidx,
- struct ieee80211_hdr *hdr, const u8 *tsc);
+ struct ieee80211_hdr *hdr, const u8 *tsc,
+ gfp_t gfp);
void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata);
void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
int encrypt);
@@ -1129,8 +1157,8 @@
void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
u16 transaction, u16 auth_alg,
- u8 *extra, size_t extra_len,
- const u8 *bssid, int encrypt);
+ u8 *extra, size_t extra_len, const u8 *bssid,
+ const u8 *key, u8 key_len, u8 key_idx);
int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
const u8 *ie, size_t ie_len);
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index b7c8a44..b8295cb 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -190,10 +190,6 @@
ETH_ALEN);
}
- if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0)
- memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr,
- ETH_ALEN);
-
/*
* Validate the MAC address for this device.
*/
@@ -224,18 +220,15 @@
local->fif_fcsfail++;
if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
local->fif_plcpfail++;
- if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+ if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) {
local->fif_control++;
+ local->fif_pspoll++;
+ }
if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
local->fif_other_bss++;
- netif_addr_lock_bh(local->mdev);
ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
break;
- case NL80211_IFTYPE_STATION:
- sdata->u.mgd.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
- /* fall through */
default:
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
@@ -246,12 +239,15 @@
if (ieee80211_vif_is_mesh(&sdata->vif)) {
local->fif_other_bss++;
- netif_addr_lock_bh(local->mdev);
ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
ieee80211_start_mesh(sdata);
+ } else if (sdata->vif.type == NL80211_IFTYPE_AP) {
+ local->fif_pspoll++;
+
+ ieee80211_configure_filter(local);
}
+
changed |= ieee80211_reset_erp_info(sdata);
ieee80211_bss_info_change_notify(sdata, changed);
ieee80211_enable_keys(sdata);
@@ -281,15 +277,6 @@
}
}
- if (local->open_count == 0) {
- res = dev_open(local->mdev);
- WARN_ON(res);
- if (res)
- goto err_del_interface;
- tasklet_enable(&local->tx_pending_tasklet);
- tasklet_enable(&local->tasklet);
- }
-
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
@@ -323,7 +310,7 @@
* to fix this.
*/
if (sdata->vif.type == NL80211_IFTYPE_STATION)
- queue_work(local->hw.workqueue, &sdata->u.mgd.work);
+ ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
netif_tx_start_all_queues(dev);
@@ -346,7 +333,10 @@
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_init_conf conf;
struct sta_info *sta;
+ unsigned long flags;
+ struct sk_buff *skb, *tmp;
u32 hw_reconf_flags = 0;
+ int i;
/*
* Stop TX on this interface first.
@@ -366,18 +356,6 @@
rcu_read_unlock();
/*
- * Announce that we are leaving the network, in case we are a
- * station interface type. This must be done before removing
- * all stations associated with sta_info_flush, otherwise STA
- * information will be gone and no announce being done.
- */
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.state != IEEE80211_STA_MLME_DISABLED)
- ieee80211_sta_deauthenticate(sdata,
- WLAN_REASON_DEAUTH_LEAVING);
- }
-
- /*
* Remove all stations associated with this interface.
*
* This must be done before calling ops->remove_interface()
@@ -408,13 +386,24 @@
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_dec(&local->iff_promiscs);
- dev_mc_unsync(local->mdev, dev);
+ if (sdata->vif.type == NL80211_IFTYPE_AP)
+ local->fif_pspoll--;
+
+ netif_addr_lock_bh(dev);
+ spin_lock_bh(&local->filter_lock);
+ __dev_addr_unsync(&local->mc_list, &local->mc_count,
+ &dev->mc_list, &dev->mc_count);
+ spin_unlock_bh(&local->filter_lock);
+ netif_addr_unlock_bh(dev);
+
+ ieee80211_configure_filter(local);
+
del_timer_sync(&local->dynamic_ps_timer);
cancel_work_sync(&local->dynamic_ps_enable_work);
/* APs need special treatment */
if (sdata->vif.type == NL80211_IFTYPE_AP) {
- struct ieee80211_sub_if_data *vlan, *tmp;
+ struct ieee80211_sub_if_data *vlan, *tmpsdata;
struct beacon_data *old_beacon = sdata->u.ap.beacon;
/* remove beacon */
@@ -423,7 +412,7 @@
kfree(old_beacon);
/* down all dependent devices, that is VLANs */
- list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
+ list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
WARN_ON(!list_empty(&sdata->u.ap.vlans));
@@ -452,29 +441,30 @@
local->fif_fcsfail--;
if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
local->fif_plcpfail--;
- if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+ if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) {
+ local->fif_pspoll--;
local->fif_control--;
+ }
if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
local->fif_other_bss--;
- netif_addr_lock_bh(local->mdev);
ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
break;
case NL80211_IFTYPE_STATION:
- memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
del_timer_sync(&sdata->u.mgd.chswitch_timer);
del_timer_sync(&sdata->u.mgd.timer);
+ del_timer_sync(&sdata->u.mgd.conn_mon_timer);
+ del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
/*
- * If the timer fired while we waited for it, it will have
- * requeued the work. Now the work will be running again
+ * If any of the timers fired while we waited for it, it will
+ * have queued its work. Now the work will be running again
* but will not rearm the timer again because it checks
* whether the interface is running, which, at this point,
* it no longer is.
*/
cancel_work_sync(&sdata->u.mgd.work);
cancel_work_sync(&sdata->u.mgd.chswitch_work);
-
+ cancel_work_sync(&sdata->u.mgd.monitor_work);
cancel_work_sync(&sdata->u.mgd.beacon_loss_work);
/*
@@ -485,12 +475,6 @@
*/
synchronize_rcu();
skb_queue_purge(&sdata->u.mgd.skb_queue);
-
- sdata->u.mgd.flags &= ~(IEEE80211_STA_PRIVACY_INVOKED |
- IEEE80211_STA_TKIP_WEP_USED);
- kfree(sdata->u.mgd.extra_ie);
- sdata->u.mgd.extra_ie = NULL;
- sdata->u.mgd.extra_ie_len = 0;
/* fall through */
case NL80211_IFTYPE_ADHOC:
if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
@@ -507,37 +491,23 @@
local->fif_other_bss--;
atomic_dec(&local->iff_allmultis);
- netif_addr_lock_bh(local->mdev);
ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
ieee80211_stop_mesh(sdata);
}
/* fall through */
default:
- if (local->scan_sdata == sdata) {
- if (!local->ops->hw_scan)
- cancel_delayed_work_sync(&local->scan_work);
- /*
- * The software scan can no longer run now, so we can
- * clear out the scan_sdata reference. However, the
- * hardware scan may still be running. The complete
- * function must be prepared to handle a NULL value.
- */
- local->scan_sdata = NULL;
- /*
- * The memory barrier guarantees that another CPU
- * that is hardware-scanning will now see the fact
- * that this interface is gone.
- */
- smp_mb();
- /*
- * If software scanning, complete the scan but since
- * the scan_sdata is NULL already don't send out a
- * scan event to userspace -- the scan is incomplete.
- */
- if (local->sw_scanning)
- ieee80211_scan_completed(&local->hw, true);
+ if (local->scan_sdata == sdata)
+ ieee80211_scan_cancel(local);
+
+ /*
+ * Disable beaconing for AP and mesh, IBSS can't
+ * still be joined to a network at this point.
+ */
+ if (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT) {
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_BEACON_ENABLED);
}
conf.vif = &sdata->vif;
@@ -555,17 +525,8 @@
ieee80211_recalc_ps(local, -1);
if (local->open_count == 0) {
- if (netif_running(local->mdev))
- dev_close(local->mdev);
-
- drv_stop(local);
-
- ieee80211_led_radio(local, false);
-
- flush_workqueue(local->hw.workqueue);
-
- tasklet_disable(&local->tx_pending_tasklet);
- tasklet_disable(&local->tasklet);
+ ieee80211_clear_tx_pending(local);
+ ieee80211_stop_device(local);
/* no reconfiguring after stop! */
hw_reconf_flags = 0;
@@ -575,6 +536,18 @@
if (hw_reconf_flags)
ieee80211_hw_config(local, hw_reconf_flags);
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
+ skb_queue_walk_safe(&local->pending[i], skb, tmp) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ if (info->control.vif == &sdata->vif) {
+ __skb_unlink(skb, &local->pending[i]);
+ dev_kfree_skb_irq(skb);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
return 0;
}
@@ -604,8 +577,11 @@
atomic_dec(&local->iff_promiscs);
sdata->flags ^= IEEE80211_SDATA_PROMISC;
}
-
- dev_mc_sync(local->mdev, dev);
+ spin_lock_bh(&local->filter_lock);
+ __dev_addr_sync(&local->mc_list, &local->mc_count,
+ &dev->mc_list, &dev->mc_count);
+ spin_unlock_bh(&local->filter_lock);
+ ieee80211_queue_work(&local->hw, &local->reconfig_filter);
}
/*
@@ -652,11 +628,6 @@
kfree_skb(sdata->u.ibss.presp);
break;
case NL80211_IFTYPE_STATION:
- kfree(sdata->u.mgd.extra_ie);
- kfree(sdata->u.mgd.assocreq_ies);
- kfree(sdata->u.mgd.assocresp_ies);
- kfree(sdata->u.mgd.sme_auth_ie);
- break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
@@ -695,7 +666,6 @@
{
ether_setup(dev);
dev->netdev_ops = &ieee80211_dataif_ops;
- dev->wireless_handlers = &ieee80211_iw_handler_def;
dev->destructor = free_netdev;
}
@@ -784,6 +754,10 @@
return 0;
}
+static struct device_type wiphy_type = {
+ .name = "wlan",
+};
+
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct net_device **new_dev, enum nl80211_iftype type,
struct vif_params *params)
@@ -798,6 +772,7 @@
name, ieee80211_if_setup);
if (!ndev)
return -ENOMEM;
+ dev_net_set(ndev, wiphy_net(local->hw.wiphy));
ndev->needed_headroom = local->tx_headroom +
4*6 /* four MAC addresses */
@@ -814,7 +789,7 @@
memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
- ndev->features |= NETIF_F_NETNS_LOCAL;
+ SET_NETDEV_DEVTYPE(ndev, &wiphy_type);
/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
sdata = netdev_priv(ndev);
@@ -931,7 +906,7 @@
struct ieee80211_sub_if_data *sdata;
int count = 0;
- if (local->hw_scanning || local->sw_scanning)
+ if (local->scanning)
return ieee80211_idle_off(local, "scanning");
list_for_each_entry(sdata, &local->interfaces, list) {
@@ -939,7 +914,8 @@
continue;
/* do not count disabled managed interfaces */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- sdata->u.mgd.state == IEEE80211_STA_MLME_DISABLED)
+ !sdata->u.mgd.associated &&
+ list_empty(&sdata->u.mgd.work_list))
continue;
/* do not count unused IBSS interfaces */
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index ce26756..659a42d 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -67,6 +67,8 @@
*
* @key: key to add to do item for
* @flag: todo flag(s)
+ *
+ * Must be called with IRQs or softirqs disabled.
*/
static void add_todo(struct ieee80211_key *key, u32 flag)
{
@@ -140,9 +142,9 @@
ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
if (!ret) {
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
if (ret && ret != -ENOSPC && ret != -EOPNOTSUPP)
@@ -164,12 +166,12 @@
if (!key || !key->local->ops->set_key)
return;
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) {
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
return;
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
sta = get_sta_for_key(key);
sdata = key->sdata;
@@ -188,9 +190,9 @@
wiphy_name(key->local->hw.wiphy),
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
@@ -437,14 +439,14 @@
__ieee80211_key_replace(sdata, sta, old_key, key);
- spin_unlock_irqrestore(&sdata->local->key_lock, flags);
-
/* free old key later */
add_todo(old_key, KEY_FLAG_TODO_DELETE);
add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS);
if (netif_running(sdata->dev))
add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD);
+
+ spin_unlock_irqrestore(&sdata->local->key_lock, flags);
}
static void __ieee80211_key_free(struct ieee80211_key *key)
@@ -547,7 +549,7 @@
*/
synchronize_rcu();
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
while (!list_empty(&todo_list)) {
key = list_first_entry(&todo_list, struct ieee80211_key, todo);
list_del_init(&key->todo);
@@ -558,7 +560,7 @@
KEY_FLAG_TODO_HWACCEL_REMOVE |
KEY_FLAG_TODO_DELETE);
key->flags &= ~todoflags;
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
work_done = false;
@@ -591,9 +593,9 @@
WARN_ON(!work_done);
- spin_lock(&todo_lock);
+ spin_lock_bh(&todo_lock);
}
- spin_unlock(&todo_lock);
+ spin_unlock_bh(&todo_lock);
}
void ieee80211_key_todo(void)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 092a017..797f539 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -50,9 +50,9 @@
} __attribute__ ((packed));
-/* must be called under mdev tx lock */
void ieee80211_configure_filter(struct ieee80211_local *local)
{
+ u64 mc;
unsigned int changed_flags;
unsigned int new_flags = 0;
@@ -62,7 +62,7 @@
if (atomic_read(&local->iff_allmultis))
new_flags |= FIF_ALLMULTI;
- if (local->monitors)
+ if (local->monitors || local->scanning)
new_flags |= FIF_BCN_PRBRESP_PROMISC;
if (local->fif_fcsfail)
@@ -77,77 +77,29 @@
if (local->fif_other_bss)
new_flags |= FIF_OTHER_BSS;
+ if (local->fif_pspoll)
+ new_flags |= FIF_PSPOLL;
+
+ spin_lock_bh(&local->filter_lock);
changed_flags = local->filter_flags ^ new_flags;
+ mc = drv_prepare_multicast(local, local->mc_count, local->mc_list);
+ spin_unlock_bh(&local->filter_lock);
+
/* be a bit nasty */
new_flags |= (1<<31);
- drv_configure_filter(local, changed_flags, &new_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, changed_flags, &new_flags, mc);
WARN_ON(new_flags & (1<<31));
local->filter_flags = new_flags & ~(1<<31);
}
-/* master interface */
-
-static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
+static void ieee80211_reconfig_filter(struct work_struct *work)
{
- memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
- return ETH_ALEN;
-}
-
-static const struct header_ops ieee80211_header_ops = {
- .create = eth_header,
- .parse = header_parse_80211,
- .rebuild = eth_rebuild_header,
- .cache = eth_header_cache,
- .cache_update = eth_header_cache_update,
-};
-
-static int ieee80211_master_open(struct net_device *dev)
-{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
- struct ieee80211_sub_if_data *sdata;
- int res = -EOPNOTSUPP;
-
- /* we hold the RTNL here so can safely walk the list */
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (netif_running(sdata->dev)) {
- res = 0;
- break;
- }
- }
-
- if (res)
- return res;
-
- netif_tx_start_all_queues(local->mdev);
-
- return 0;
-}
-
-static int ieee80211_master_stop(struct net_device *dev)
-{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
- struct ieee80211_sub_if_data *sdata;
-
- /* we hold the RTNL here so can safely walk the list */
- list_for_each_entry(sdata, &local->interfaces, list)
- if (netif_running(sdata->dev))
- dev_close(sdata->dev);
-
- return 0;
-}
-
-static void ieee80211_master_set_multicast_list(struct net_device *dev)
-{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, reconfig_filter);
ieee80211_configure_filter(local);
}
@@ -259,7 +211,8 @@
}
if (changed & BSS_CHANGED_BEACON_ENABLED) {
- if (local->sw_scanning) {
+ if (local->quiescing || !netif_running(sdata->dev) ||
+ test_bit(SCAN_SW_SCANNING, &local->scanning)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
/*
@@ -288,9 +241,6 @@
drv_bss_info_changed(local, &sdata->vif,
&sdata->vif.bss_conf, changed);
-
- /* DEPRECATED */
- local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
@@ -310,7 +260,6 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int tmp;
- skb->dev = local->mdev;
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
@@ -330,19 +279,16 @@
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
struct sk_buff *skb;
- struct ieee80211_rx_status rx_status;
struct ieee80211_ra_tid *ra_tid;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
- /* status is in skb->cb */
- memcpy(&rx_status, skb->cb, sizeof(rx_status));
/* Clear skb->pkt_type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
- __ieee80211_rx(local_to_hw(local), skb, &rx_status);
+ ieee80211_rx(local_to_hw(local), skb);
break;
case IEEE80211_TX_STATUS_MSG:
skb->pkt_type = 0;
@@ -375,6 +321,31 @@
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ /*
+ * XXX: This is temporary!
+ *
+ * The problem here is that when we get here, the driver will
+ * quite likely have pretty much overwritten info->control by
+ * using info->driver_data or info->rate_driver_data. Thus,
+ * when passing out the frame to the driver again, we would be
+ * passing completely bogus data since the driver would then
+ * expect a properly filled info->control. In mac80211 itself
+ * the same problem occurs, since we need info->control.vif
+ * internally.
+ *
+ * To fix this, we should send the frame through TX processing
+ * again. However, it's not that simple, since the frame will
+ * have been software-encrypted (if applicable) already, and
+ * encrypting it again doesn't do much good. So to properly do
+ * that, we not only have to skip the actual 'raw' encryption
+ * (key selection etc. still has to be done!) but also the
+ * sequence number assignment since that impacts the crypto
+ * encapsulation, of course.
+ *
+ * Hence, for now, fix the bug by just dropping the frame.
+ */
+ goto drop;
+
sta->tx_filtered_count++;
/*
@@ -428,6 +399,7 @@
return;
}
+ drop:
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "%s: dropped TX filtered frame, "
@@ -510,6 +482,8 @@
}
rate_control_tx_status(local, sband, sta, skb);
+ if (ieee80211_vif_is_mesh(&sta->sdata->vif))
+ ieee80211s_update_metric(local, sta, skb);
}
rcu_read_unlock();
@@ -685,6 +659,7 @@
if (!wiphy)
return NULL;
+ wiphy->netnsok = true;
wiphy->privid = mac80211_wiphy_privid;
/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
@@ -711,7 +686,6 @@
local->hw.max_rates = 1;
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
- local->hw.conf.radio_enabled = true;
local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
@@ -719,13 +693,15 @@
mutex_init(&local->scan_mtx);
spin_lock_init(&local->key_lock);
-
+ spin_lock_init(&local->filter_lock);
spin_lock_init(&local->queue_stop_reason_lock);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
INIT_WORK(&local->restart_work, ieee80211_restart_work);
+ INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
+
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
INIT_WORK(&local->dynamic_ps_disable_work,
@@ -739,12 +715,10 @@
skb_queue_head_init(&local->pending[i]);
tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
(unsigned long)local);
- tasklet_disable(&local->tx_pending_tasklet);
tasklet_init(&local->tasklet,
ieee80211_tasklet_handler,
(unsigned long) local);
- tasklet_disable(&local->tasklet);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
@@ -755,30 +729,11 @@
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
-static const struct net_device_ops ieee80211_master_ops = {
- .ndo_start_xmit = ieee80211_master_start_xmit,
- .ndo_open = ieee80211_master_open,
- .ndo_stop = ieee80211_master_stop,
- .ndo_set_multicast_list = ieee80211_master_set_multicast_list,
- .ndo_select_queue = ieee80211_select_queue,
-};
-
-static void ieee80211_master_setup(struct net_device *mdev)
-{
- mdev->type = ARPHRD_IEEE80211;
- mdev->netdev_ops = &ieee80211_master_ops;
- mdev->header_ops = &ieee80211_header_ops;
- mdev->tx_queue_len = 1000;
- mdev->addr_len = ETH_ALEN;
-}
-
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
int result;
enum ieee80211_band band;
- struct net_device *mdev;
- struct ieee80211_master_priv *mpriv;
int channels, i, j, max_bitrates;
bool supp_ht;
static const u32 cipher_suites[] = {
@@ -818,9 +773,9 @@
supp_ht = supp_ht || sband->ht_cap.ht_supported;
}
- local->int_scan_req.n_channels = channels;
- local->int_scan_req.channels = kzalloc(sizeof(void *) * channels, GFP_KERNEL);
- if (!local->int_scan_req.channels)
+ local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
+ sizeof(void *) * channels, GFP_KERNEL);
+ if (!local->int_scan_req)
return -ENOMEM;
/* if low-level driver supports AP, we also support VLAN */
@@ -877,19 +832,9 @@
if (hw->queues > IEEE80211_MAX_QUEUES)
hw->queues = IEEE80211_MAX_QUEUES;
- mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv),
- "wmaster%d", ieee80211_master_setup,
- hw->queues);
- if (!mdev)
- goto fail_mdev_alloc;
-
- mpriv = netdev_priv(mdev);
- mpriv->local = local;
- local->mdev = mdev;
-
- local->hw.workqueue =
+ local->workqueue =
create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
- if (!local->hw.workqueue) {
+ if (!local->workqueue) {
result = -ENOMEM;
goto fail_workqueue;
}
@@ -921,17 +866,6 @@
}
rtnl_lock();
- result = dev_alloc_name(local->mdev, local->mdev->name);
- if (result < 0)
- goto fail_dev;
-
- memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
- SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
- local->mdev->features |= NETIF_F_NETNS_LOCAL;
-
- result = register_netdevice(local->mdev);
- if (result < 0)
- goto fail_dev;
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
@@ -956,13 +890,13 @@
/* alloc internal scan request */
i = 0;
- local->int_scan_req.ssids = &local->scan_ssid;
- local->int_scan_req.n_ssids = 1;
+ local->int_scan_req->ssids = &local->scan_ssid;
+ local->int_scan_req->n_ssids = 1;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!hw->wiphy->bands[band])
continue;
for (j = 0; j < hw->wiphy->bands[band]->n_channels; j++) {
- local->int_scan_req.channels[i] =
+ local->int_scan_req->channels[i] =
&hw->wiphy->bands[band]->channels[j];
i++;
}
@@ -984,23 +918,17 @@
ieee80211_led_exit(local);
ieee80211_remove_interfaces(local);
fail_rate:
- unregister_netdevice(local->mdev);
- local->mdev = NULL;
- fail_dev:
rtnl_unlock();
ieee80211_wep_free(local);
fail_wep:
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
- destroy_workqueue(local->hw.workqueue);
+ destroy_workqueue(local->workqueue);
fail_workqueue:
- if (local->mdev)
- free_netdev(local->mdev);
- fail_mdev_alloc:
wiphy_unregister(local->hw.wiphy);
fail_wiphy_register:
- kfree(local->int_scan_req.channels);
+ kfree(local->int_scan_req);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
@@ -1022,15 +950,12 @@
* because the driver cannot be handing us frames any
* more and the tasklet is killed.
*/
-
- /* First, we remove all virtual interfaces. */
ieee80211_remove_interfaces(local);
- /* then, finally, remove the master interface */
- unregister_netdevice(local->mdev);
-
rtnl_unlock();
+ cancel_work_sync(&local->reconfig_filter);
+
ieee80211_clear_tx_pending(local);
sta_info_stop(local);
rate_control_deinitialize(local);
@@ -1043,12 +968,11 @@
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
- destroy_workqueue(local->hw.workqueue);
+ destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
- free_netdev(local->mdev);
- kfree(local->int_scan_req.channels);
+ kfree(local->int_scan_req);
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 11cf45b..f7364e5 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -18,8 +18,11 @@
#define PP_OFFSET 1 /* Path Selection Protocol */
#define PM_OFFSET 5 /* Path Selection Metric */
#define CC_OFFSET 9 /* Congestion Control Mode */
-#define CAPAB_OFFSET 17
-#define ACCEPT_PLINKS 0x80
+#define SP_OFFSET 13 /* Synchronization Protocol */
+#define AUTH_OFFSET 17 /* Authentication Protocol */
+#define CAPAB_OFFSET 22
+#define CAPAB_ACCEPT_PLINKS 0x80
+#define CAPAB_FORWARDING 0x10
#define TMR_RUNNING_HK 0
#define TMR_RUNNING_MP 1
@@ -47,14 +50,14 @@
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
- ifmsh->housekeeping = true;
+ ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
if (local->quiescing) {
set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
return;
}
- queue_work(local->hw.workqueue, &ifmsh->work);
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
}
/**
@@ -84,7 +87,9 @@
memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
- memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0)
+ memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
+ memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
+ memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
return true;
return false;
@@ -97,7 +102,7 @@
*/
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
{
- return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0;
+ return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
}
/**
@@ -123,11 +128,18 @@
void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
{
- u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff};
+ u8 oui[3] = {0x00, 0x0F, 0xAC};
- memcpy(sta->mesh_pp_id, def_id, 4);
- memcpy(sta->mesh_pm_id, def_id, 4);
- memcpy(sta->mesh_cc_id, def_id, 4);
+ memcpy(sta->mesh_pp_id, oui, sizeof(oui));
+ memcpy(sta->mesh_pm_id, oui, sizeof(oui));
+ memcpy(sta->mesh_cc_id, oui, sizeof(oui));
+ memcpy(sta->mesh_sp_id, oui, sizeof(oui));
+ memcpy(sta->mesh_auth_id, oui, sizeof(oui));
+ sta->mesh_pp_id[sizeof(oui)] = 0;
+ sta->mesh_pm_id[sizeof(oui)] = 0;
+ sta->mesh_cc_id[sizeof(oui)] = 0xff;
+ sta->mesh_sp_id[sizeof(oui)] = 0xff;
+ sta->mesh_auth_id[sizeof(oui)] = 0x0;
}
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
@@ -245,7 +257,7 @@
if (sdata->u.mesh.mesh_id_len)
memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
- pos = skb_put(skb, 21);
+ pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
*pos++ = WLAN_EID_MESH_CONFIG;
*pos++ = IEEE80211_MESH_CONFIG_LEN;
/* Version */
@@ -263,15 +275,22 @@
memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
pos += 4;
- /* Channel precedence:
- * Not running simple channel unification protocol
- */
- memset(pos, 0x00, 4);
+ /* Synchronization protocol identifier */
+ memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
pos += 4;
+ /* Authentication Protocol identifier */
+ memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
+ pos += 4;
+
+ /* Mesh Formation Info */
+ memset(pos, 0x00, 1);
+ pos += 1;
+
/* Mesh capability */
sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
- *pos++ = sdata->u.mesh.accepting_plinks ? ACCEPT_PLINKS : 0x00;
+ *pos = CAPAB_FORWARDING;
+ *pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
*pos++ = 0x00;
return;
@@ -320,30 +339,6 @@
return newtbl;
}
-static void __mesh_table_free(struct mesh_table *tbl)
-{
- kfree(tbl->hash_buckets);
- kfree(tbl->hashwlock);
- kfree(tbl);
-}
-
-void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
-{
- struct hlist_head *mesh_hash;
- struct hlist_node *p, *q;
- int i;
-
- mesh_hash = tbl->hash_buckets;
- for (i = 0; i <= tbl->hash_mask; i++) {
- spin_lock(&tbl->hashwlock[i]);
- hlist_for_each_safe(p, q, &mesh_hash[i]) {
- tbl->free_node(p, free_leafs);
- atomic_dec(&tbl->entries);
- }
- spin_unlock(&tbl->hashwlock[i]);
- }
- __mesh_table_free(tbl);
-}
static void ieee80211_mesh_path_timer(unsigned long data)
{
@@ -357,63 +352,79 @@
return;
}
- queue_work(local->hw.workqueue, &ifmsh->work);
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
}
-struct mesh_table *mesh_table_grow(struct mesh_table *tbl)
-{
- struct mesh_table *newtbl;
- struct hlist_head *oldhash;
- struct hlist_node *p, *q;
- int i;
-
- if (atomic_read(&tbl->entries)
- < tbl->mean_chain_len * (tbl->hash_mask + 1))
- goto endgrow;
-
- newtbl = mesh_table_alloc(tbl->size_order + 1);
- if (!newtbl)
- goto endgrow;
-
- newtbl->free_node = tbl->free_node;
- newtbl->mean_chain_len = tbl->mean_chain_len;
- newtbl->copy_node = tbl->copy_node;
- atomic_set(&newtbl->entries, atomic_read(&tbl->entries));
-
- oldhash = tbl->hash_buckets;
- for (i = 0; i <= tbl->hash_mask; i++)
- hlist_for_each(p, &oldhash[i])
- if (tbl->copy_node(p, newtbl) < 0)
- goto errcopy;
-
- return newtbl;
-
-errcopy:
- for (i = 0; i <= newtbl->hash_mask; i++) {
- hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
- tbl->free_node(p, 0);
+/**
+ * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
+ * @hdr: 802.11 frame header
+ * @fc: frame control field
+ * @meshda: destination address in the mesh
+ * @meshsa: source address address in the mesh. Same as TA, as frame is
+ * locally originated.
+ *
+ * Return the length of the 802.11 (does not include a mesh control header)
+ */
+int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, char
+ *meshda, char *meshsa) {
+ if (is_multicast_ether_addr(meshda)) {
+ *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
+ /* DA TA SA */
+ memcpy(hdr->addr1, meshda, ETH_ALEN);
+ memcpy(hdr->addr2, meshsa, ETH_ALEN);
+ memcpy(hdr->addr3, meshsa, ETH_ALEN);
+ return 24;
+ } else {
+ *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
+ IEEE80211_FCTL_TODS);
+ /* RA TA DA SA */
+ memset(hdr->addr1, 0, ETH_ALEN); /* RA is resolved later */
+ memcpy(hdr->addr2, meshsa, ETH_ALEN);
+ memcpy(hdr->addr3, meshda, ETH_ALEN);
+ memcpy(hdr->addr4, meshsa, ETH_ALEN);
+ return 30;
}
- __mesh_table_free(newtbl);
-endgrow:
- return NULL;
}
/**
* ieee80211_new_mesh_header - create a new mesh header
* @meshhdr: uninitialized mesh header
* @sdata: mesh interface to be used
+ * @addr4: addr4 of the mesh frame (1st in ae header)
+ * may be NULL
+ * @addr5: addr5 of the mesh frame (1st or 2nd in ae header)
+ * may be NULL unless addr6 is present
+ * @addr6: addr6 of the mesh frame (2nd or 3rd in ae header)
+ * may be NULL unless addr5 is present
*
* Return the header length.
*/
int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
- struct ieee80211_sub_if_data *sdata)
+ struct ieee80211_sub_if_data *sdata, char *addr4,
+ char *addr5, char *addr6)
{
- meshhdr->flags = 0;
+ int aelen = 0;
+ memset(meshhdr, 0, sizeof(meshhdr));
meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
sdata->u.mesh.mesh_seqnum++;
-
- return 6;
+ if (addr4) {
+ meshhdr->flags |= MESH_FLAGS_AE_A4;
+ aelen += ETH_ALEN;
+ memcpy(meshhdr->eaddr1, addr4, ETH_ALEN);
+ }
+ if (addr5 && addr6) {
+ meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
+ aelen += 2 * ETH_ALEN;
+ if (!addr4) {
+ memcpy(meshhdr->eaddr1, addr5, ETH_ALEN);
+ memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
+ } else {
+ memcpy(meshhdr->eaddr2, addr5, ETH_ALEN);
+ memcpy(meshhdr->eaddr3, addr6, ETH_ALEN);
+ }
+ }
+ return 6 + aelen;
}
static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
@@ -433,7 +444,6 @@
if (free_plinks != sdata->u.mesh.accepting_plinks)
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
- ifmsh->housekeeping = false;
mod_timer(&ifmsh->housekeeping_timer,
round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
}
@@ -470,10 +480,12 @@
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee80211_local *local = sdata->local;
- ifmsh->housekeeping = true;
- queue_work(local->hw.workqueue, &ifmsh->work);
+ ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
+ sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
- BSS_CHANGED_BEACON_ENABLED);
+ BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON_INT);
}
void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
@@ -568,7 +580,7 @@
ifmsh = &sdata->u.mesh;
- rx_status = (struct ieee80211_rx_status *) skb->cb;
+ rx_status = IEEE80211_SKB_RXCB(skb);
mgmt = (struct ieee80211_mgmt *) skb->data;
stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
@@ -597,7 +609,7 @@
if (!netif_running(sdata->dev))
return;
- if (local->sw_scanning || local->hw_scanning)
+ if (local->scanning)
return;
while ((skb = skb_dequeue(&ifmsh->skb_queue)))
@@ -608,7 +620,13 @@
ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
mesh_path_start_discovery(sdata);
- if (ifmsh->housekeeping)
+ if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
+ mesh_mpath_table_grow();
+
+ if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
+ mesh_mpp_table_grow();
+
+ if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
ieee80211_mesh_housekeeping(sdata, ifmsh);
}
@@ -619,7 +637,7 @@
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list)
if (ieee80211_vif_is_mesh(&sdata->vif))
- queue_work(local->hw.workqueue, &sdata->u.mesh.work);
+ ieee80211_queue_work(&local->hw, &sdata->u.mesh.work);
rcu_read_unlock();
}
@@ -671,8 +689,7 @@
}
ieee80211_rx_result
-ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status)
+ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
@@ -686,12 +703,14 @@
fc = le16_to_cpu(mgmt->frame_control);
switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_ACTION:
+ if (skb->len < IEEE80211_MIN_ACTION_SIZE)
+ return RX_DROP_MONITOR;
+ /* fall through */
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
- case IEEE80211_STYPE_ACTION:
- memcpy(skb->cb, rx_status, sizeof(*rx_status));
skb_queue_tail(&ifmsh->skb_queue, skb);
- queue_work(local->hw.workqueue, &ifmsh->work);
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
return RX_QUEUED;
}
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index c7d7281..dd1c193 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -44,6 +44,23 @@
};
/**
+ * enum mesh_deferred_task_flags - mac80211 mesh deferred tasks
+ *
+ *
+ *
+ * @MESH_WORK_HOUSEKEEPING: run the periodic mesh housekeeping tasks
+ * @MESH_WORK_GROW_MPATH_TABLE: the mesh path table is full and needs
+ * to grow.
+ * @MESH_WORK_GROW_MPP_TABLE: the mesh portals table is full and needs to
+ * grow
+ */
+enum mesh_deferred_task_flags {
+ MESH_WORK_HOUSEKEEPING,
+ MESH_WORK_GROW_MPATH_TABLE,
+ MESH_WORK_GROW_MPP_TABLE,
+};
+
+/**
* struct mesh_path - mac80211 mesh path structure
*
* @dst: mesh path destination mac address
@@ -61,7 +78,7 @@
* retry
* @discovery_retries: number of discovery retries
* @flags: mesh path flags, as specified on &enum mesh_path_flags
- * @state_lock: mesh pat state lock
+ * @state_lock: mesh path state lock
*
*
* The combination of dst and sdata is unique in the mesh path table. Since the
@@ -174,6 +191,7 @@
*/
#define MESH_PATH_REFRESH_TIME 1000
#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
+#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units */
#define MESH_MAX_PREQ_RETRIES 4
#define MESH_PATH_EXPIRE (600 * HZ)
@@ -193,8 +211,11 @@
/* Public interfaces */
/* Various */
+int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
+ char *da, char *sa);
int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
- struct ieee80211_sub_if_data *sdata);
+ struct ieee80211_sub_if_data *sdata, char *addr4,
+ char *addr5, char *addr6);
int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
struct ieee80211_sub_if_data *sdata);
bool mesh_matches_local(struct ieee802_11_elems *ie,
@@ -205,11 +226,12 @@
void mesh_rmc_free(struct ieee80211_sub_if_data *sdata);
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata);
void ieee80211s_init(void);
+void ieee80211s_update_metric(struct ieee80211_local *local,
+ struct sta_info *stainfo, struct sk_buff *skb);
void ieee80211s_stop(void);
void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata);
ieee80211_rx_result
-ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status);
+ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata);
@@ -247,7 +269,8 @@
/* Mesh tables */
struct mesh_table *mesh_table_alloc(int size_order);
void mesh_table_free(struct mesh_table *tbl, bool free_leafs);
-struct mesh_table *mesh_table_grow(struct mesh_table *tbl);
+void mesh_mpath_table_grow(void);
+void mesh_mpp_table_grow(void);
u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
struct mesh_table *tbl);
/* Mesh paths */
@@ -266,6 +289,8 @@
void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata);
void mesh_path_restart(struct ieee80211_sub_if_data *sdata);
+extern int mesh_paths_generation;
+
#ifdef CONFIG_MAC80211_MESH
extern int mesh_allocated;
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index f49ef28..e12a786 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -201,6 +201,24 @@
return 0;
}
+void ieee80211s_update_metric(struct ieee80211_local *local,
+ struct sta_info *stainfo, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ int failed;
+
+ if (!ieee80211_is_data(hdr->frame_control))
+ return;
+
+ failed = !(txinfo->flags & IEEE80211_TX_STAT_ACK);
+
+ /* moving average, scaled to 100 */
+ stainfo->fail_avg = ((80 * stainfo->fail_avg + 5) / 100 + 20 * failed);
+ if (stainfo->fail_avg > 95)
+ mesh_plink_broken(stainfo);
+}
+
static u32 airtime_link_metric_get(struct ieee80211_local *local,
struct sta_info *sta)
{
@@ -397,7 +415,8 @@
static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
- u8 *preq_elem, u32 metric) {
+ u8 *preq_elem, u32 metric)
+{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_path *mpath;
u8 *dst_addr, *orig_addr;
@@ -430,7 +449,7 @@
if ((!(mpath->flags & MESH_PATH_DSN_VALID)) ||
DSN_LT(mpath->dsn, dst_dsn)) {
mpath->dsn = dst_dsn;
- mpath->flags &= MESH_PATH_DSN_VALID;
+ mpath->flags |= MESH_PATH_DSN_VALID;
} else if ((!(dst_flags & MP_F_DO)) &&
(mpath->flags & MESH_PATH_ACTIVE)) {
reply = true;
@@ -478,6 +497,7 @@
hopcount, ttl, cpu_to_le32(lifetime),
cpu_to_le32(metric), cpu_to_le32(preq_id),
sdata);
+ ifmsh->mshstats.fwded_mcast++;
ifmsh->mshstats.fwded_frames++;
}
}
@@ -536,6 +556,8 @@
cpu_to_le32(lifetime), cpu_to_le32(metric),
0, sdata);
rcu_read_unlock();
+
+ sdata->u.mesh.mshstats.fwded_unicast++;
sdata->u.mesh.mshstats.fwded_frames++;
return;
@@ -660,14 +682,14 @@
spin_unlock(&ifmsh->mesh_preq_queue_lock);
if (time_after(jiffies, ifmsh->last_preq + min_preq_int_jiff(sdata)))
- queue_work(sdata->local->hw.workqueue, &ifmsh->work);
+ ieee80211_queue_work(&sdata->local->hw, &ifmsh->work);
else if (time_before(jiffies, ifmsh->last_preq)) {
/* avoid long wait if did not send preqs for a long time
* and jiffies wrapped around
*/
ifmsh->last_preq = jiffies - min_preq_int_jiff(sdata) - 1;
- queue_work(sdata->local->hw.workqueue, &ifmsh->work);
+ ieee80211_queue_work(&sdata->local->hw, &ifmsh->work);
} else
mod_timer(&ifmsh->mesh_path_timer, ifmsh->last_preq +
min_preq_int_jiff(sdata));
@@ -686,11 +708,11 @@
u8 ttl, dst_flags;
u32 lifetime;
- spin_lock(&ifmsh->mesh_preq_queue_lock);
+ spin_lock_bh(&ifmsh->mesh_preq_queue_lock);
if (!ifmsh->preq_queue_len ||
time_before(jiffies, ifmsh->last_preq +
min_preq_int_jiff(sdata))) {
- spin_unlock(&ifmsh->mesh_preq_queue_lock);
+ spin_unlock_bh(&ifmsh->mesh_preq_queue_lock);
return;
}
@@ -698,7 +720,7 @@
struct mesh_preq_queue, list);
list_del(&preq_node->list);
--ifmsh->preq_queue_len;
- spin_unlock(&ifmsh->mesh_preq_queue_lock);
+ spin_unlock_bh(&ifmsh->mesh_preq_queue_lock);
rcu_read_lock();
mpath = mesh_path_lookup(preq_node->dst, sdata);
@@ -784,7 +806,6 @@
mesh_path_add(dst_addr, sdata);
mpath = mesh_path_lookup(dst_addr, sdata);
if (!mpath) {
- dev_kfree_skb(skb);
sdata->u.mesh.mshstats.dropped_frames_no_route++;
err = -ENOSPC;
goto endlookup;
@@ -792,7 +813,7 @@
}
if (mpath->flags & MESH_PATH_ACTIVE) {
- if (time_after(jiffies, mpath->exp_time -
+ if (time_after(jiffies, mpath->exp_time +
msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time))
&& !memcmp(sdata->dev->dev_addr, hdr->addr4,
ETH_ALEN)
@@ -804,17 +825,17 @@
memcpy(hdr->addr1, mpath->next_hop->sta.addr,
ETH_ALEN);
} else {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (!(mpath->flags & MESH_PATH_RESOLVING)) {
/* Start discovery only if it is not running yet */
mesh_queue_preq(mpath, PREQ_Q_F_START);
}
if (skb_queue_len(&mpath->frame_queue) >=
- MESH_FRAME_QUEUE_LEN) {
- skb_to_free = mpath->frame_queue.next;
- skb_unlink(skb_to_free, &mpath->frame_queue);
- }
+ MESH_FRAME_QUEUE_LEN)
+ skb_to_free = skb_dequeue(&mpath->frame_queue);
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
skb_queue_tail(&mpath->frame_queue, skb);
if (skb_to_free)
mesh_path_discard_frame(skb_to_free, sdata);
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 479597e..751c4d0 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -38,6 +38,71 @@
static struct mesh_table *mesh_paths;
static struct mesh_table *mpp_paths; /* Store paths for MPP&MAP */
+int mesh_paths_generation;
+static void __mesh_table_free(struct mesh_table *tbl)
+{
+ kfree(tbl->hash_buckets);
+ kfree(tbl->hashwlock);
+ kfree(tbl);
+}
+
+void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
+{
+ struct hlist_head *mesh_hash;
+ struct hlist_node *p, *q;
+ int i;
+
+ mesh_hash = tbl->hash_buckets;
+ for (i = 0; i <= tbl->hash_mask; i++) {
+ spin_lock(&tbl->hashwlock[i]);
+ hlist_for_each_safe(p, q, &mesh_hash[i]) {
+ tbl->free_node(p, free_leafs);
+ atomic_dec(&tbl->entries);
+ }
+ spin_unlock(&tbl->hashwlock[i]);
+ }
+ __mesh_table_free(tbl);
+}
+
+static struct mesh_table *mesh_table_grow(struct mesh_table *tbl)
+{
+ struct mesh_table *newtbl;
+ struct hlist_head *oldhash;
+ struct hlist_node *p, *q;
+ int i;
+
+ if (atomic_read(&tbl->entries)
+ < tbl->mean_chain_len * (tbl->hash_mask + 1))
+ goto endgrow;
+
+ newtbl = mesh_table_alloc(tbl->size_order + 1);
+ if (!newtbl)
+ goto endgrow;
+
+ newtbl->free_node = tbl->free_node;
+ newtbl->mean_chain_len = tbl->mean_chain_len;
+ newtbl->copy_node = tbl->copy_node;
+ atomic_set(&newtbl->entries, atomic_read(&tbl->entries));
+
+ oldhash = tbl->hash_buckets;
+ for (i = 0; i <= tbl->hash_mask; i++)
+ hlist_for_each(p, &oldhash[i])
+ if (tbl->copy_node(p, newtbl) < 0)
+ goto errcopy;
+
+ return newtbl;
+
+errcopy:
+ for (i = 0; i <= newtbl->hash_mask; i++) {
+ hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
+ tbl->free_node(p, 0);
+ }
+ __mesh_table_free(newtbl);
+endgrow:
+ return NULL;
+}
+
+
/* This lock will have the grow table function as writer and add / delete nodes
* as readers. When reading the table (i.e. doing lookups) we are well protected
* by RCU
@@ -55,7 +120,25 @@
*/
void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta)
{
+ struct sk_buff *skb;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff_head tmpq;
+ unsigned long flags;
+
rcu_assign_pointer(mpath->next_hop, sta);
+
+ __skb_queue_head_init(&tmpq);
+
+ spin_lock_irqsave(&mpath->frame_queue.lock, flags);
+
+ while ((skb = __skb_dequeue(&mpath->frame_queue)) != NULL) {
+ hdr = (struct ieee80211_hdr *) skb->data;
+ memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN);
+ __skb_queue_tail(&tmpq, skb);
+ }
+
+ skb_queue_splice(&tmpq, &mpath->frame_queue);
+ spin_unlock_irqrestore(&mpath->frame_queue.lock, flags);
}
@@ -167,6 +250,8 @@
*/
int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ struct ieee80211_local *local = sdata->local;
struct mesh_path *mpath, *new_mpath;
struct mpath_node *node, *new_node;
struct hlist_head *bucket;
@@ -175,8 +260,6 @@
int err = 0;
u32 hash_idx;
- might_sleep();
-
if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
return -ENOTSUPP;
@@ -188,11 +271,11 @@
return -ENOSPC;
err = -ENOMEM;
- new_mpath = kzalloc(sizeof(struct mesh_path), GFP_KERNEL);
+ new_mpath = kzalloc(sizeof(struct mesh_path), GFP_ATOMIC);
if (!new_mpath)
goto err_path_alloc;
- new_node = kmalloc(sizeof(struct mpath_node), GFP_KERNEL);
+ new_node = kmalloc(sizeof(struct mpath_node), GFP_ATOMIC);
if (!new_node)
goto err_node_alloc;
@@ -225,23 +308,13 @@
mesh_paths->mean_chain_len * (mesh_paths->hash_mask + 1))
grow = 1;
+ mesh_paths_generation++;
+
spin_unlock(&mesh_paths->hashwlock[hash_idx]);
read_unlock(&pathtbl_resize_lock);
if (grow) {
- struct mesh_table *oldtbl, *newtbl;
-
- write_lock(&pathtbl_resize_lock);
- oldtbl = mesh_paths;
- newtbl = mesh_table_grow(mesh_paths);
- if (!newtbl) {
- write_unlock(&pathtbl_resize_lock);
- return 0;
- }
- rcu_assign_pointer(mesh_paths, newtbl);
- write_unlock(&pathtbl_resize_lock);
-
- synchronize_rcu();
- mesh_table_free(oldtbl, false);
+ set_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags);
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
}
return 0;
@@ -256,9 +329,46 @@
return err;
}
+void mesh_mpath_table_grow(void)
+{
+ struct mesh_table *oldtbl, *newtbl;
+
+ write_lock(&pathtbl_resize_lock);
+ oldtbl = mesh_paths;
+ newtbl = mesh_table_grow(mesh_paths);
+ if (!newtbl) {
+ write_unlock(&pathtbl_resize_lock);
+ return;
+ }
+ rcu_assign_pointer(mesh_paths, newtbl);
+ write_unlock(&pathtbl_resize_lock);
+
+ synchronize_rcu();
+ mesh_table_free(oldtbl, false);
+}
+
+void mesh_mpp_table_grow(void)
+{
+ struct mesh_table *oldtbl, *newtbl;
+
+ write_lock(&pathtbl_resize_lock);
+ oldtbl = mpp_paths;
+ newtbl = mesh_table_grow(mpp_paths);
+ if (!newtbl) {
+ write_unlock(&pathtbl_resize_lock);
+ return;
+ }
+ rcu_assign_pointer(mpp_paths, newtbl);
+ write_unlock(&pathtbl_resize_lock);
+
+ synchronize_rcu();
+ mesh_table_free(oldtbl, false);
+}
int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ struct ieee80211_local *local = sdata->local;
struct mesh_path *mpath, *new_mpath;
struct mpath_node *node, *new_node;
struct hlist_head *bucket;
@@ -267,8 +377,6 @@
int err = 0;
u32 hash_idx;
- might_sleep();
-
if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
return -ENOTSUPP;
@@ -277,11 +385,11 @@
return -ENOTSUPP;
err = -ENOMEM;
- new_mpath = kzalloc(sizeof(struct mesh_path), GFP_KERNEL);
+ new_mpath = kzalloc(sizeof(struct mesh_path), GFP_ATOMIC);
if (!new_mpath)
goto err_path_alloc;
- new_node = kmalloc(sizeof(struct mpath_node), GFP_KERNEL);
+ new_node = kmalloc(sizeof(struct mpath_node), GFP_ATOMIC);
if (!new_node)
goto err_node_alloc;
@@ -315,20 +423,8 @@
spin_unlock(&mpp_paths->hashwlock[hash_idx]);
read_unlock(&pathtbl_resize_lock);
if (grow) {
- struct mesh_table *oldtbl, *newtbl;
-
- write_lock(&pathtbl_resize_lock);
- oldtbl = mpp_paths;
- newtbl = mesh_table_grow(mpp_paths);
- if (!newtbl) {
- write_unlock(&pathtbl_resize_lock);
- return 0;
- }
- rcu_assign_pointer(mpp_paths, newtbl);
- write_unlock(&pathtbl_resize_lock);
-
- synchronize_rcu();
- mesh_table_free(oldtbl, false);
+ set_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags);
+ ieee80211_queue_work(&local->hw, &ifmsh->work);
}
return 0;
@@ -466,6 +562,7 @@
err = -ENXIO;
enddel:
+ mesh_paths_generation++;
spin_unlock(&mesh_paths->hashwlock[hash_idx]);
read_unlock(&pathtbl_resize_lock);
return err;
@@ -481,11 +578,9 @@
*/
void mesh_path_tx_pending(struct mesh_path *mpath)
{
- struct sk_buff *skb;
-
- while ((skb = skb_dequeue(&mpath->frame_queue)) &&
- (mpath->flags & MESH_PATH_ACTIVE))
- dev_queue_xmit(skb);
+ if (mpath->flags & MESH_PATH_ACTIVE)
+ ieee80211_add_pending_skbs(mpath->sdata->local,
+ &mpath->frame_queue);
}
/**
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index cb14253..ffcbad7 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -409,7 +409,7 @@
baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt;
if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) {
baseaddr += 4;
- baselen -= 4;
+ baselen += 4;
}
ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
if (!elems.peer_link) {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 07e7e41..97a278a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -27,45 +27,101 @@
#include "rate.h"
#include "led.h"
-#define IEEE80211_ASSOC_SCANS_MAX_TRIES 2
#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
#define IEEE80211_ASSOC_MAX_TRIES 3
-#define IEEE80211_MONITORING_INTERVAL (2 * HZ)
-#define IEEE80211_PROBE_WAIT (HZ / 5)
-#define IEEE80211_PROBE_IDLE_TIME (60 * HZ)
-#define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
+#define IEEE80211_MAX_PROBE_TRIES 5
+
+/*
+ * beacon loss detection timeout
+ * XXX: should depend on beacon interval
+ */
+#define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
+/*
+ * Time the connection can be idle before we probe
+ * it to see if we can still talk to the AP.
+ */
+#define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
+/*
+ * Time we wait for a probe response after sending
+ * a probe request because of beacon loss or for
+ * checking the connection still works.
+ */
+#define IEEE80211_PROBE_WAIT (HZ / 2)
#define TMR_RUNNING_TIMER 0
#define TMR_RUNNING_CHANSW 1
+/*
+ * All cfg80211 functions have to be called outside a locked
+ * section so that they can acquire a lock themselves... This
+ * is much simpler than queuing up things in cfg80211, but we
+ * do need some indirection for that here.
+ */
+enum rx_mgmt_action {
+ /* no action required */
+ RX_MGMT_NONE,
+
+ /* caller must call cfg80211_send_rx_auth() */
+ RX_MGMT_CFG80211_AUTH,
+
+ /* caller must call cfg80211_send_rx_assoc() */
+ RX_MGMT_CFG80211_ASSOC,
+
+ /* caller must call cfg80211_send_deauth() */
+ RX_MGMT_CFG80211_DEAUTH,
+
+ /* caller must call cfg80211_send_disassoc() */
+ RX_MGMT_CFG80211_DISASSOC,
+
+ /* caller must call cfg80211_auth_timeout() & free work */
+ RX_MGMT_CFG80211_AUTH_TO,
+
+ /* caller must call cfg80211_assoc_timeout() & free work */
+ RX_MGMT_CFG80211_ASSOC_TO,
+};
+
/* utils */
+static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed *ifmgd)
+{
+ WARN_ON(!mutex_is_locked(&ifmgd->mtx));
+}
+
+/*
+ * We can have multiple work items (and connection probing)
+ * scheduling this timer, but we need to take care to only
+ * reschedule it when it should fire _earlier_ than it was
+ * asked for before, or if it's not pending right now. This
+ * function ensures that. Note that it then is required to
+ * run this function for all timeouts after the first one
+ * has happened -- the work that runs from this timer will
+ * do that.
+ */
+static void run_again(struct ieee80211_if_managed *ifmgd,
+ unsigned long timeout)
+{
+ ASSERT_MGD_MTX(ifmgd);
+
+ if (!timer_pending(&ifmgd->timer) ||
+ time_before(timeout, ifmgd->timer.expires))
+ mod_timer(&ifmgd->timer, timeout);
+}
+
+static void mod_beacon_timer(struct ieee80211_sub_if_data *sdata)
+{
+ if (sdata->local->hw.flags & IEEE80211_HW_BEACON_FILTER)
+ return;
+
+ mod_timer(&sdata->u.mgd.bcn_mon_timer,
+ round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME));
+}
+
static int ecw2cw(int ecw)
{
return (1 << ecw) - 1;
}
-static u8 *ieee80211_bss_get_ie(struct ieee80211_bss *bss, u8 ie)
-{
- u8 *end, *pos;
-
- pos = bss->cbss.information_elements;
- if (pos == NULL)
- return NULL;
- end = pos + bss->cbss.len_information_elements;
-
- while (pos + 1 < end) {
- if (pos + 2 + pos[1] > end)
- break;
- if (pos[0] == ie)
- return pos;
- pos += 2 + pos[1];
- }
-
- return NULL;
-}
-
static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
struct ieee80211_supported_band *sband,
u32 *rates)
@@ -94,11 +150,10 @@
*/
static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
struct ieee80211_ht_info *hti,
- u16 ap_ht_cap_flags)
+ const u8 *bssid, u16 ap_ht_cap_flags)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct sta_info *sta;
u32 changed = 0;
u16 ht_opmode;
@@ -147,12 +202,10 @@
ieee80211_hw_config(local, 0);
rcu_read_lock();
-
- sta = sta_info_get(local, ifmgd->bssid);
+ sta = sta_info_get(local, bssid);
if (sta)
rate_control_rate_update(local, sband, sta,
IEEE80211_RC_HT_CHANGED);
-
rcu_read_unlock();
}
@@ -175,23 +228,24 @@
/* frame sending functions */
-static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
+static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
- u8 *pos, *ies, *ht_ie;
+ u8 *pos;
+ const u8 *ies, *ht_ie;
int i, len, count, rates_len, supp_rates_len;
u16 capab;
- struct ieee80211_bss *bss;
int wmm = 0;
struct ieee80211_supported_band *sband;
u32 rates = 0;
skb = dev_alloc_skb(local->hw.extra_tx_headroom +
- sizeof(*mgmt) + 200 + ifmgd->extra_ie_len +
- ifmgd->ssid_len);
+ sizeof(*mgmt) + 200 + wk->ie_len +
+ wk->ssid_len);
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer for assoc "
"frame\n", sdata->dev->name);
@@ -210,45 +264,35 @@
capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
}
- bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
- local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
- if (bss) {
- if (bss->cbss.capability & WLAN_CAPABILITY_PRIVACY)
- capab |= WLAN_CAPABILITY_PRIVACY;
- if (bss->wmm_used)
- wmm = 1;
+ if (wk->bss->cbss.capability & WLAN_CAPABILITY_PRIVACY)
+ capab |= WLAN_CAPABILITY_PRIVACY;
+ if (wk->bss->wmm_used)
+ wmm = 1;
- /* get all rates supported by the device and the AP as
- * some APs don't like getting a superset of their rates
- * in the association request (e.g. D-Link DAP 1353 in
- * b-only mode) */
- rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+ /* get all rates supported by the device and the AP as
+ * some APs don't like getting a superset of their rates
+ * in the association request (e.g. D-Link DAP 1353 in
+ * b-only mode) */
+ rates_len = ieee80211_compatible_rates(wk->bss, sband, &rates);
- if ((bss->cbss.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
- (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
- capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
-
- ieee80211_rx_bss_put(local, bss);
- } else {
- rates = ~0;
- rates_len = sband->n_bitrates;
- }
+ if ((wk->bss->cbss.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
+ (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
+ capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
- memcpy(mgmt->da, ifmgd->bssid, ETH_ALEN);
+ memcpy(mgmt->da, wk->bss->cbss.bssid, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
- memcpy(mgmt->bssid, ifmgd->bssid, ETH_ALEN);
+ memcpy(mgmt->bssid, wk->bss->cbss.bssid, ETH_ALEN);
- if (ifmgd->flags & IEEE80211_STA_PREV_BSSID_SET) {
+ if (!is_zero_ether_addr(wk->prev_bssid)) {
skb_put(skb, 10);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_REASSOC_REQ);
mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
mgmt->u.reassoc_req.listen_interval =
cpu_to_le16(local->hw.conf.listen_interval);
- memcpy(mgmt->u.reassoc_req.current_ap, ifmgd->prev_bssid,
+ memcpy(mgmt->u.reassoc_req.current_ap, wk->prev_bssid,
ETH_ALEN);
} else {
skb_put(skb, 4);
@@ -260,10 +304,10 @@
}
/* SSID */
- ies = pos = skb_put(skb, 2 + ifmgd->ssid_len);
+ ies = pos = skb_put(skb, 2 + wk->ssid_len);
*pos++ = WLAN_EID_SSID;
- *pos++ = ifmgd->ssid_len;
- memcpy(pos, ifmgd->ssid, ifmgd->ssid_len);
+ *pos++ = wk->ssid_len;
+ memcpy(pos, wk->ssid, wk->ssid_len);
/* add all rates which were marked to be used above */
supp_rates_len = rates_len;
@@ -318,9 +362,9 @@
}
}
- if (ifmgd->extra_ie) {
- pos = skb_put(skb, ifmgd->extra_ie_len);
- memcpy(pos, ifmgd->extra_ie, ifmgd->extra_ie_len);
+ if (wk->ie_len && wk->ie) {
+ pos = skb_put(skb, wk->ie_len);
+ memcpy(pos, wk->ie, wk->ie_len);
}
if (wmm && (ifmgd->flags & IEEE80211_STA_WMM_ENABLED)) {
@@ -345,9 +389,9 @@
*/
if (wmm && (ifmgd->flags & IEEE80211_STA_WMM_ENABLED) &&
sband->ht_cap.ht_supported &&
- (ht_ie = ieee80211_bss_get_ie(bss, WLAN_EID_HT_INFORMATION)) &&
+ (ht_ie = ieee80211_bss_get_ie(&wk->bss->cbss, WLAN_EID_HT_INFORMATION)) &&
ht_ie[1] >= sizeof(struct ieee80211_ht_info) &&
- (!(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED))) {
+ (!(ifmgd->flags & IEEE80211_STA_DISABLE_11N))) {
struct ieee80211_ht_info *ht_info =
(struct ieee80211_ht_info *)(ht_ie + 2);
u16 cap = sband->ht_cap.cap;
@@ -382,18 +426,13 @@
memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
}
- kfree(ifmgd->assocreq_ies);
- ifmgd->assocreq_ies_len = (skb->data + skb->len) - ies;
- ifmgd->assocreq_ies = kmalloc(ifmgd->assocreq_ies_len, GFP_KERNEL);
- if (ifmgd->assocreq_ies)
- memcpy(ifmgd->assocreq_ies, ies, ifmgd->assocreq_ies_len);
-
ieee80211_tx_skb(sdata, skb, 0);
}
static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
- u16 stype, u16 reason)
+ const u8 *bssid, u16 stype, u16 reason,
+ void *cookie)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -410,18 +449,18 @@
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
- memcpy(mgmt->da, ifmgd->bssid, ETH_ALEN);
+ memcpy(mgmt->da, bssid, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
- memcpy(mgmt->bssid, ifmgd->bssid, ETH_ALEN);
+ memcpy(mgmt->bssid, bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype);
skb_put(skb, 2);
/* u.deauth.reason_code == u.disassoc.reason_code */
mgmt->u.deauth.reason_code = cpu_to_le16(reason);
if (stype == IEEE80211_STYPE_DEAUTH)
- cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, skb->len);
+ cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len, cookie);
else
- cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, skb->len);
+ cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len, cookie);
ieee80211_tx_skb(sdata, skb, ifmgd->flags & IEEE80211_STA_MFP_ENABLED);
}
@@ -494,28 +533,26 @@
{
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
- struct ieee80211_bss *bss;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
if (!netif_running(sdata->dev))
return;
- bss = ieee80211_rx_bss_get(sdata->local, ifmgd->bssid,
- sdata->local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
- if (!bss)
- goto exit;
+ mutex_lock(&ifmgd->mtx);
+ if (!ifmgd->associated)
+ goto out;
sdata->local->oper_channel = sdata->local->csa_channel;
- /* XXX: shouldn't really modify cfg80211-owned data! */
- if (!ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL))
- bss->cbss.channel = sdata->local->oper_channel;
+ ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL);
- ieee80211_rx_bss_put(sdata->local, bss);
-exit:
- ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
+ /* XXX: shouldn't really modify cfg80211-owned data! */
+ ifmgd->associated->cbss.channel = sdata->local->oper_channel;
+
ieee80211_wake_queues_by_reason(&sdata->local->hw,
IEEE80211_QUEUE_STOP_REASON_CSA);
+ out:
+ ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
+ mutex_unlock(&ifmgd->mtx);
}
static void ieee80211_chswitch_timer(unsigned long data)
@@ -529,7 +566,7 @@
return;
}
- queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
+ ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
}
void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
@@ -540,10 +577,12 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
- if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATED)
+ ASSERT_MGD_MTX(ifmgd);
+
+ if (!ifmgd->associated)
return;
- if (sdata->local->sw_scanning || sdata->local->hw_scanning)
+ if (sdata->local->scanning)
return;
/* Disregard subsequent beacons if we are already running a timer
@@ -559,7 +598,7 @@
sdata->local->csa_channel = new_ch;
if (sw_elem->count <= 1) {
- queue_work(sdata->local->hw.workqueue, &ifmgd->chswitch_work);
+ ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
} else {
ieee80211_stop_queues_by_reason(&sdata->local->hw,
IEEE80211_QUEUE_STOP_REASON_CSA);
@@ -601,7 +640,7 @@
* If we are scanning right now then the parameters will
* take effect when scan finishes.
*/
- if (local->hw_scanning || local->sw_scanning)
+ if (local->scanning)
return;
if (conf->dynamic_ps_timeout > 0 &&
@@ -651,8 +690,9 @@
}
if (count == 1 && found->u.mgd.powersave &&
- (found->u.mgd.flags & IEEE80211_STA_ASSOCIATED) &&
- !(found->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL)) {
+ found->u.mgd.associated && list_empty(&found->u.mgd.work_list) &&
+ !(found->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL))) {
s32 beaconint_us;
if (latency < 0)
@@ -724,7 +764,7 @@
if (local->quiescing || local->suspended)
return;
- queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
+ ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
}
/* MLME */
@@ -806,9 +846,6 @@
u16 capab, bool erp_valid, u8 erp)
{
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-#endif
u32 changed = 0;
bool use_protection;
bool use_short_preamble;
@@ -825,42 +862,16 @@
use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
if (use_protection != bss_conf->use_cts_prot) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: CTS protection %s (BSSID=%pM)\n",
- sdata->dev->name,
- use_protection ? "enabled" : "disabled",
- ifmgd->bssid);
- }
-#endif
bss_conf->use_cts_prot = use_protection;
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
if (use_short_preamble != bss_conf->use_short_preamble) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: switched to %s barker preamble"
- " (BSSID=%pM)\n",
- sdata->dev->name,
- use_short_preamble ? "short" : "long",
- ifmgd->bssid);
- }
-#endif
bss_conf->use_short_preamble = use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
if (use_short_slot != bss_conf->use_short_slot) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: switched to %s slot time"
- " (BSSID=%pM)\n",
- sdata->dev->name,
- use_short_slot ? "short" : "long",
- ifmgd->bssid);
- }
-#endif
bss_conf->use_short_slot = use_short_slot;
changed |= BSS_CHANGED_ERP_SLOT;
}
@@ -868,105 +879,31 @@
return changed;
}
-static void ieee80211_sta_send_apinfo(struct ieee80211_sub_if_data *sdata)
-{
- union iwreq_data wrqu;
-
- memset(&wrqu, 0, sizeof(wrqu));
- if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED)
- memcpy(wrqu.ap_addr.sa_data, sdata->u.mgd.bssid, ETH_ALEN);
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
- wireless_send_event(sdata->dev, SIOCGIWAP, &wrqu, NULL);
-}
-
-static void ieee80211_sta_send_associnfo(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- char *buf;
- size_t len;
- int i;
- union iwreq_data wrqu;
-
- if (!ifmgd->assocreq_ies && !ifmgd->assocresp_ies)
- return;
-
- buf = kmalloc(50 + 2 * (ifmgd->assocreq_ies_len +
- ifmgd->assocresp_ies_len), GFP_KERNEL);
- if (!buf)
- return;
-
- len = sprintf(buf, "ASSOCINFO(");
- if (ifmgd->assocreq_ies) {
- len += sprintf(buf + len, "ReqIEs=");
- for (i = 0; i < ifmgd->assocreq_ies_len; i++) {
- len += sprintf(buf + len, "%02x",
- ifmgd->assocreq_ies[i]);
- }
- }
- if (ifmgd->assocresp_ies) {
- if (ifmgd->assocreq_ies)
- len += sprintf(buf + len, " ");
- len += sprintf(buf + len, "RespIEs=");
- for (i = 0; i < ifmgd->assocresp_ies_len; i++) {
- len += sprintf(buf + len, "%02x",
- ifmgd->assocresp_ies[i]);
- }
- }
- len += sprintf(buf + len, ")");
-
- if (len > IW_CUSTOM_MAX) {
- len = sprintf(buf, "ASSOCRESPIE=");
- for (i = 0; i < ifmgd->assocresp_ies_len; i++) {
- len += sprintf(buf + len, "%02x",
- ifmgd->assocresp_ies[i]);
- }
- }
-
- if (len <= IW_CUSTOM_MAX) {
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = len;
- wireless_send_event(sdata->dev, IWEVCUSTOM, &wrqu, buf);
- }
-
- kfree(buf);
-}
-
-
static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk,
u32 bss_info_changed)
{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- struct ieee80211_conf *conf = &local_to_hw(local)->conf;
-
- struct ieee80211_bss *bss;
+ struct ieee80211_bss *bss = wk->bss;
bss_info_changed |= BSS_CHANGED_ASSOC;
- ifmgd->flags |= IEEE80211_STA_ASSOCIATED;
+ /* set timing information */
+ sdata->vif.bss_conf.beacon_int = bss->cbss.beacon_interval;
+ sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
+ sdata->vif.bss_conf.dtim_period = bss->dtim_period;
- bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
- conf->channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
- if (bss) {
- /* set timing information */
- sdata->vif.bss_conf.beacon_int = bss->cbss.beacon_interval;
- sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
- sdata->vif.bss_conf.dtim_period = bss->dtim_period;
+ bss_info_changed |= BSS_CHANGED_BEACON_INT;
+ bss_info_changed |= ieee80211_handle_bss_capability(sdata,
+ bss->cbss.capability, bss->has_erp_value, bss->erp_value);
- bss_info_changed |= BSS_CHANGED_BEACON_INT;
- bss_info_changed |= ieee80211_handle_bss_capability(sdata,
- bss->cbss.capability, bss->has_erp_value, bss->erp_value);
+ sdata->u.mgd.associated = bss;
+ sdata->u.mgd.old_associate_work = wk;
+ memcpy(sdata->u.mgd.bssid, bss->cbss.bssid, ETH_ALEN);
- cfg80211_hold_bss(&bss->cbss);
+ /* just to be sure */
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
- ieee80211_rx_bss_put(local, bss);
- }
-
- ifmgd->flags |= IEEE80211_STA_PREV_BSSID_SET;
- memcpy(ifmgd->prev_bssid, sdata->u.mgd.bssid, ETH_ALEN);
- ieee80211_sta_send_associnfo(sdata);
-
- ifmgd->last_probe = jiffies;
ieee80211_led_assoc(local, 1);
sdata->vif.bss_conf.assoc = 1;
@@ -982,176 +919,157 @@
ieee80211_bss_info_change_notify(sdata, bss_info_changed);
- /* will be same as sdata */
- if (local->ps_sdata) {
- mutex_lock(&local->iflist_mtx);
- ieee80211_recalc_ps(local, -1);
- mutex_unlock(&local->iflist_mtx);
- }
+ mutex_lock(&local->iflist_mtx);
+ ieee80211_recalc_ps(local, -1);
+ mutex_unlock(&local->iflist_mtx);
netif_tx_start_all_queues(sdata->dev);
netif_carrier_on(sdata->dev);
-
- ieee80211_sta_send_apinfo(sdata);
}
-static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
+static enum rx_mgmt_action __must_check
+ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- ifmgd->direct_probe_tries++;
- if (ifmgd->direct_probe_tries > IEEE80211_AUTH_MAX_TRIES) {
+ wk->tries++;
+ if (wk->tries > IEEE80211_AUTH_MAX_TRIES) {
printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n",
- sdata->dev->name, ifmgd->bssid);
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(local);
- cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
+ sdata->dev->name, wk->bss->cbss.bssid);
/*
* Most likely AP is not in the range so remove the
- * bss information associated to the AP
+ * bss struct for that AP.
*/
- ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
- sdata->local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
+ cfg80211_unlink_bss(local->hw.wiphy, &wk->bss->cbss);
/*
* We might have a pending scan which had no chance to run yet
- * due to state == IEEE80211_STA_MLME_DIRECT_PROBE.
- * Hence, queue the STAs work again
+ * due to work needing to be done. Hence, queue the STAs work
+ * again for that.
*/
- queue_work(local->hw.workqueue, &ifmgd->work);
- return;
+ ieee80211_queue_work(&local->hw, &ifmgd->work);
+ return RX_MGMT_CFG80211_AUTH_TO;
}
- printk(KERN_DEBUG "%s: direct probe to AP %pM try %d\n",
- sdata->dev->name, ifmgd->bssid,
- ifmgd->direct_probe_tries);
+ printk(KERN_DEBUG "%s: direct probe to AP %pM (try %d)\n",
+ sdata->dev->name, wk->bss->cbss.bssid,
+ wk->tries);
- ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE;
-
- /* Direct probe is sent to broadcast address as some APs
+ /*
+ * Direct probe is sent to broadcast address as some APs
* will not answer to direct packet in unassociated state.
*/
- ieee80211_send_probe_req(sdata, NULL,
- ifmgd->ssid, ifmgd->ssid_len, NULL, 0);
+ ieee80211_send_probe_req(sdata, NULL, wk->ssid, wk->ssid_len, NULL, 0);
- mod_timer(&ifmgd->timer, jiffies + IEEE80211_AUTH_TIMEOUT);
+ wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+ run_again(ifmgd, wk->timeout);
+
+ return RX_MGMT_NONE;
}
-static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata)
+static enum rx_mgmt_action __must_check
+ieee80211_authenticate(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- u8 *ies;
- size_t ies_len;
- ifmgd->auth_tries++;
- if (ifmgd->auth_tries > IEEE80211_AUTH_MAX_TRIES) {
+ wk->tries++;
+ if (wk->tries > IEEE80211_AUTH_MAX_TRIES) {
printk(KERN_DEBUG "%s: authentication with AP %pM"
" timed out\n",
- sdata->dev->name, ifmgd->bssid);
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(local);
- cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
- ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
- sdata->local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
+ sdata->dev->name, wk->bss->cbss.bssid);
+
+ /*
+ * Most likely AP is not in the range so remove the
+ * bss struct for that AP.
+ */
+ cfg80211_unlink_bss(local->hw.wiphy, &wk->bss->cbss);
/*
* We might have a pending scan which had no chance to run yet
- * due to state == IEEE80211_STA_MLME_AUTHENTICATE.
- * Hence, queue the STAs work again
+ * due to work needing to be done. Hence, queue the STAs work
+ * again for that.
*/
- queue_work(local->hw.workqueue, &ifmgd->work);
- return;
+ ieee80211_queue_work(&local->hw, &ifmgd->work);
+ return RX_MGMT_CFG80211_AUTH_TO;
}
- ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE;
- printk(KERN_DEBUG "%s: authenticate with AP %pM\n",
- sdata->dev->name, ifmgd->bssid);
+ printk(KERN_DEBUG "%s: authenticate with AP %pM (try %d)\n",
+ sdata->dev->name, wk->bss->cbss.bssid, wk->tries);
- if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
- ies = ifmgd->sme_auth_ie;
- ies_len = ifmgd->sme_auth_ie_len;
- } else {
- ies = NULL;
- ies_len = 0;
- }
- ieee80211_send_auth(sdata, 1, ifmgd->auth_alg, ies, ies_len,
- ifmgd->bssid, 0);
- ifmgd->auth_transaction = 2;
+ ieee80211_send_auth(sdata, 1, wk->auth_alg, wk->ie, wk->ie_len,
+ wk->bss->cbss.bssid, NULL, 0, 0);
+ wk->auth_transaction = 2;
- mod_timer(&ifmgd->timer, jiffies + IEEE80211_AUTH_TIMEOUT);
+ wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
+ run_again(ifmgd, wk->timeout);
+
+ return RX_MGMT_NONE;
}
-/*
- * The disassoc 'reason' argument can be either our own reason
- * if self disconnected or a reason code from the AP.
- */
static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
- bool deauth, bool self_disconnected,
- u16 reason)
+ bool deauth)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- struct ieee80211_conf *conf = &local_to_hw(local)->conf;
- struct ieee80211_bss *bss;
struct sta_info *sta;
u32 changed = 0, config_changed = 0;
+ u8 bssid[ETH_ALEN];
+
+ ASSERT_MGD_MTX(ifmgd);
+
+ if (WARN_ON(!ifmgd->associated))
+ return;
+
+ memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN);
+
+ ifmgd->associated = NULL;
+ memset(ifmgd->bssid, 0, ETH_ALEN);
if (deauth) {
- ifmgd->direct_probe_tries = 0;
- ifmgd->auth_tries = 0;
+ kfree(ifmgd->old_associate_work);
+ ifmgd->old_associate_work = NULL;
+ } else {
+ struct ieee80211_mgd_work *wk = ifmgd->old_associate_work;
+
+ wk->state = IEEE80211_MGD_STATE_IDLE;
+ list_add(&wk->list, &ifmgd->work_list);
}
- ifmgd->assoc_scan_tries = 0;
- ifmgd->assoc_tries = 0;
+
+ /*
+ * we need to commit the associated = NULL change because the
+ * scan code uses that to determine whether this iface should
+ * go to/wake up from powersave or not -- and could otherwise
+ * wake the queues erroneously.
+ */
+ smp_mb();
+
+ /*
+ * Thus, we can only afterwards stop the queues -- to account
+ * for the case where another CPU is finishing a scan at this
+ * time -- we don't want the scan code to enable queues.
+ */
netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev);
rcu_read_lock();
- sta = sta_info_get(local, ifmgd->bssid);
+ sta = sta_info_get(local, bssid);
if (sta)
ieee80211_sta_tear_down_BA_sessions(sta);
rcu_read_unlock();
- bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
- conf->channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
-
- if (bss) {
- cfg80211_unhold_bss(&bss->cbss);
- ieee80211_rx_bss_put(local, bss);
- }
-
- if (self_disconnected) {
- if (deauth)
- ieee80211_send_deauth_disassoc(sdata,
- IEEE80211_STYPE_DEAUTH, reason);
- else
- ieee80211_send_deauth_disassoc(sdata,
- IEEE80211_STYPE_DISASSOC, reason);
- }
-
- ifmgd->flags &= ~IEEE80211_STA_ASSOCIATED;
changed |= ieee80211_reset_erp_info(sdata);
ieee80211_led_assoc(local, 0);
changed |= BSS_CHANGED_ASSOC;
sdata->vif.bss_conf.assoc = false;
- ieee80211_sta_send_apinfo(sdata);
-
- if (self_disconnected || reason == WLAN_REASON_DISASSOC_STA_HAS_LEFT) {
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
- sdata->local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
- }
-
ieee80211_set_wmm_default(sdata);
ieee80211_recalc_idle(local);
@@ -1180,7 +1098,7 @@
rcu_read_lock();
- sta = sta_info_get(local, ifmgd->bssid);
+ sta = sta_info_get(local, bssid);
if (!sta) {
rcu_read_unlock();
return;
@@ -1193,83 +1111,42 @@
sta_info_destroy(sta);
}
-static int ieee80211_sta_wep_configured(struct ieee80211_sub_if_data *sdata)
-{
- if (!sdata || !sdata->default_key ||
- sdata->default_key->conf.alg != ALG_WEP)
- return 0;
- return 1;
-}
-
-static int ieee80211_privacy_mismatch(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_bss *bss;
- int bss_privacy;
- int wep_privacy;
- int privacy_invoked;
-
- if (!ifmgd || (ifmgd->flags & IEEE80211_STA_EXT_SME))
- return 0;
-
- bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
- local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
- if (!bss)
- return 0;
-
- bss_privacy = !!(bss->cbss.capability & WLAN_CAPABILITY_PRIVACY);
- wep_privacy = !!ieee80211_sta_wep_configured(sdata);
- privacy_invoked = !!(ifmgd->flags & IEEE80211_STA_PRIVACY_INVOKED);
-
- ieee80211_rx_bss_put(local, bss);
-
- if ((bss_privacy == wep_privacy) || (bss_privacy == privacy_invoked))
- return 0;
-
- return 1;
-}
-
-static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
+static enum rx_mgmt_action __must_check
+ieee80211_associate(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- ifmgd->assoc_tries++;
- if (ifmgd->assoc_tries > IEEE80211_ASSOC_MAX_TRIES) {
+ wk->tries++;
+ if (wk->tries > IEEE80211_ASSOC_MAX_TRIES) {
printk(KERN_DEBUG "%s: association with AP %pM"
" timed out\n",
- sdata->dev->name, ifmgd->bssid);
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(local);
- cfg80211_send_assoc_timeout(sdata->dev, ifmgd->bssid);
- ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
- sdata->local->hw.conf.channel->center_freq,
- ifmgd->ssid, ifmgd->ssid_len);
+ sdata->dev->name, wk->bss->cbss.bssid);
+
+ /*
+ * Most likely AP is not in the range so remove the
+ * bss struct for that AP.
+ */
+ cfg80211_unlink_bss(local->hw.wiphy, &wk->bss->cbss);
+
/*
* We might have a pending scan which had no chance to run yet
- * due to state == IEEE80211_STA_MLME_ASSOCIATE.
- * Hence, queue the STAs work again
+ * due to work needing to be done. Hence, queue the STAs work
+ * again for that.
*/
- queue_work(local->hw.workqueue, &ifmgd->work);
- return;
+ ieee80211_queue_work(&local->hw, &ifmgd->work);
+ return RX_MGMT_CFG80211_ASSOC_TO;
}
- ifmgd->state = IEEE80211_STA_MLME_ASSOCIATE;
- printk(KERN_DEBUG "%s: associate with AP %pM\n",
- sdata->dev->name, ifmgd->bssid);
- if (ieee80211_privacy_mismatch(sdata)) {
- printk(KERN_DEBUG "%s: mismatch in privacy configuration and "
- "mixed-cell disabled - abort association\n", sdata->dev->name);
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(local);
- return;
- }
+ printk(KERN_DEBUG "%s: associate with AP %pM (try %d)\n",
+ sdata->dev->name, wk->bss->cbss.bssid, wk->tries);
+ ieee80211_send_assoc(sdata, wk);
- ieee80211_send_assoc(sdata);
+ wk->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
+ run_again(ifmgd, wk->timeout);
- mod_timer(&ifmgd->timer, jiffies + IEEE80211_ASSOC_TIMEOUT);
+ return RX_MGMT_NONE;
}
void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
@@ -1280,12 +1157,84 @@
* from AP because we know that the connection is working both ways
* at that time. But multicast frames (and hence also beacons) must
* be ignored here, because we need to trigger the timer during
- * data idle periods for sending the periodical probe request to
- * the AP.
+ * data idle periods for sending the periodic probe request to the
+ * AP we're connected to.
*/
- if (!is_multicast_ether_addr(hdr->addr1))
- mod_timer(&sdata->u.mgd.timer,
- jiffies + IEEE80211_MONITORING_INTERVAL);
+ if (is_multicast_ether_addr(hdr->addr1))
+ return;
+
+ mod_timer(&sdata->u.mgd.conn_mon_timer,
+ round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
+}
+
+static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ const u8 *ssid;
+
+ ssid = ieee80211_bss_get_ie(&ifmgd->associated->cbss, WLAN_EID_SSID);
+ ieee80211_send_probe_req(sdata, ifmgd->associated->cbss.bssid,
+ ssid + 2, ssid[1], NULL, 0);
+
+ ifmgd->probe_send_count++;
+ ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
+ run_again(ifmgd, ifmgd->probe_timeout);
+}
+
+static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
+ bool beacon)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ bool already = false;
+
+ if (!netif_running(sdata->dev))
+ return;
+
+ if (sdata->local->scanning)
+ return;
+
+ mutex_lock(&ifmgd->mtx);
+
+ if (!ifmgd->associated)
+ goto out;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (beacon && net_ratelimit())
+ printk(KERN_DEBUG "%s: detected beacon loss from AP "
+ "- sending probe request\n", sdata->dev->name);
+#endif
+
+ /*
+ * The driver/our work has already reported this event or the
+ * connection monitoring has kicked in and we have already sent
+ * a probe request. Or maybe the AP died and the driver keeps
+ * reporting until we disassociate...
+ *
+ * In either case we have to ignore the current call to this
+ * function (except for setting the correct probe reason bit)
+ * because otherwise we would reset the timer every time and
+ * never check whether we received a probe response!
+ */
+ if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL))
+ already = true;
+
+ if (beacon)
+ ifmgd->flags |= IEEE80211_STA_BEACON_POLL;
+ else
+ ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
+
+ if (already)
+ goto out;
+
+ mutex_lock(&sdata->local->iflist_mtx);
+ ieee80211_recalc_ps(sdata->local, -1);
+ mutex_unlock(&sdata->local->iflist_mtx);
+
+ ifmgd->probe_send_count = 0;
+ ieee80211_mgd_probe_ap_send(sdata);
+ out:
+ mutex_unlock(&ifmgd->mtx);
}
void ieee80211_beacon_loss_work(struct work_struct *work)
@@ -1293,147 +1242,28 @@
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data,
u.mgd.beacon_loss_work);
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- /*
- * The driver has already reported this event and we have
- * already sent a probe request. Maybe the AP died and the
- * driver keeps reporting until we disassociate... We have
- * to ignore that because otherwise we would continually
- * reset the timer and never check whether we received a
- * probe response!
- */
- if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
- return;
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
- "- sending probe request\n", sdata->dev->name,
- sdata->u.mgd.bssid);
- }
-#endif
-
- ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
-
- mutex_lock(&sdata->local->iflist_mtx);
- ieee80211_recalc_ps(sdata->local, -1);
- mutex_unlock(&sdata->local->iflist_mtx);
-
- ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
- ifmgd->ssid_len, NULL, 0);
-
- mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT);
+ ieee80211_mgd_probe_ap(sdata, true);
}
void ieee80211_beacon_loss(struct ieee80211_vif *vif)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- queue_work(sdata->local->hw.workqueue,
- &sdata->u.mgd.beacon_loss_work);
+ ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_loss_work);
}
EXPORT_SYMBOL(ieee80211_beacon_loss);
-static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
+static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk)
{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
- unsigned long last_rx;
- bool disassoc = false;
-
- /* TODO: start monitoring current AP signal quality and number of
- * missed beacons. Scan other channels every now and then and search
- * for better APs. */
- /* TODO: remove expired BSSes */
-
- ifmgd->state = IEEE80211_STA_MLME_ASSOCIATED;
-
- rcu_read_lock();
-
- sta = sta_info_get(local, ifmgd->bssid);
- if (!sta) {
- printk(KERN_DEBUG "%s: No STA entry for own AP %pM\n",
- sdata->dev->name, ifmgd->bssid);
- disassoc = true;
- rcu_read_unlock();
- goto out;
- }
-
- last_rx = sta->last_rx;
- rcu_read_unlock();
-
- if ((ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) &&
- time_after(jiffies, last_rx + IEEE80211_PROBE_WAIT)) {
- printk(KERN_DEBUG "%s: no probe response from AP %pM "
- "- disassociating\n",
- sdata->dev->name, ifmgd->bssid);
- disassoc = true;
- ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
- goto out;
- }
-
- /*
- * Beacon filtering is only enabled with power save and then the
- * stack should not check for beacon loss.
- */
- if (!((local->hw.flags & IEEE80211_HW_BEACON_FILTER) &&
- (local->hw.conf.flags & IEEE80211_CONF_PS)) &&
- time_after(jiffies,
- ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: beacon loss from AP %pM "
- "- sending probe request\n",
- sdata->dev->name, ifmgd->bssid);
- }
-#endif
- ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
- mutex_lock(&local->iflist_mtx);
- ieee80211_recalc_ps(local, -1);
- mutex_unlock(&local->iflist_mtx);
- ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
- ifmgd->ssid_len, NULL, 0);
- mod_timer(&ifmgd->timer, jiffies + IEEE80211_PROBE_WAIT);
- goto out;
- }
-
- if (time_after(jiffies, last_rx + IEEE80211_PROBE_IDLE_TIME)) {
- ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
- mutex_lock(&local->iflist_mtx);
- ieee80211_recalc_ps(local, -1);
- mutex_unlock(&local->iflist_mtx);
- ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
- ifmgd->ssid_len, NULL, 0);
- }
-
- out:
- if (!disassoc)
- mod_timer(&ifmgd->timer,
- jiffies + IEEE80211_MONITORING_INTERVAL);
- else
- ieee80211_set_disassoc(sdata, true, true,
- WLAN_REASON_PREV_AUTH_NOT_VALID);
-}
-
-
-static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
+ wk->state = IEEE80211_MGD_STATE_IDLE;
printk(KERN_DEBUG "%s: authenticated\n", sdata->dev->name);
- ifmgd->flags |= IEEE80211_STA_AUTHENTICATED;
- if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
- /* Wait for SME to request association */
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(sdata->local);
- } else
- ieee80211_associate(sdata);
}
static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk,
struct ieee80211_mgmt *mgmt,
size_t len)
{
@@ -1444,161 +1274,133 @@
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
if (!elems.challenge)
return;
- ieee80211_send_auth(sdata, 3, sdata->u.mgd.auth_alg,
+ ieee80211_send_auth(sdata, 3, wk->auth_alg,
elems.challenge - 2, elems.challenge_len + 2,
- sdata->u.mgd.bssid, 1);
- sdata->u.mgd.auth_transaction = 4;
+ wk->bss->cbss.bssid,
+ wk->key, wk->key_len, wk->key_idx);
+ wk->auth_transaction = 4;
}
-static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len)
+static enum rx_mgmt_action __must_check
+ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len)
{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u16 auth_alg, auth_transaction, status_code;
- if (ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE)
- return;
+ if (wk->state != IEEE80211_MGD_STATE_AUTH)
+ return RX_MGMT_NONE;
if (len < 24 + 6)
- return;
+ return RX_MGMT_NONE;
- if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN) != 0)
- return;
+ if (memcmp(wk->bss->cbss.bssid, mgmt->sa, ETH_ALEN) != 0)
+ return RX_MGMT_NONE;
- if (memcmp(ifmgd->bssid, mgmt->bssid, ETH_ALEN) != 0)
- return;
+ if (memcmp(wk->bss->cbss.bssid, mgmt->bssid, ETH_ALEN) != 0)
+ return RX_MGMT_NONE;
auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
status_code = le16_to_cpu(mgmt->u.auth.status_code);
- if (auth_alg != ifmgd->auth_alg ||
- auth_transaction != ifmgd->auth_transaction)
- return;
+ if (auth_alg != wk->auth_alg ||
+ auth_transaction != wk->auth_transaction)
+ return RX_MGMT_NONE;
if (status_code != WLAN_STATUS_SUCCESS) {
- if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
- u8 algs[3];
- const int num_algs = ARRAY_SIZE(algs);
- int i, pos;
- algs[0] = algs[1] = algs[2] = 0xff;
- if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_OPEN)
- algs[0] = WLAN_AUTH_OPEN;
- if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_SHARED_KEY)
- algs[1] = WLAN_AUTH_SHARED_KEY;
- if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_LEAP)
- algs[2] = WLAN_AUTH_LEAP;
- if (ifmgd->auth_alg == WLAN_AUTH_OPEN)
- pos = 0;
- else if (ifmgd->auth_alg == WLAN_AUTH_SHARED_KEY)
- pos = 1;
- else
- pos = 2;
- for (i = 0; i < num_algs; i++) {
- pos++;
- if (pos >= num_algs)
- pos = 0;
- if (algs[pos] == ifmgd->auth_alg ||
- algs[pos] == 0xff)
- continue;
- if (algs[pos] == WLAN_AUTH_SHARED_KEY &&
- !ieee80211_sta_wep_configured(sdata))
- continue;
- ifmgd->auth_alg = algs[pos];
- break;
- }
- }
- return;
+ list_del(&wk->list);
+ kfree(wk);
+ return RX_MGMT_CFG80211_AUTH;
}
- switch (ifmgd->auth_alg) {
+ switch (wk->auth_alg) {
case WLAN_AUTH_OPEN:
case WLAN_AUTH_LEAP:
case WLAN_AUTH_FT:
- ieee80211_auth_completed(sdata);
- cfg80211_send_rx_auth(sdata->dev, (u8 *) mgmt, len);
- break;
+ ieee80211_auth_completed(sdata, wk);
+ return RX_MGMT_CFG80211_AUTH;
case WLAN_AUTH_SHARED_KEY:
- if (ifmgd->auth_transaction == 4) {
- ieee80211_auth_completed(sdata);
- cfg80211_send_rx_auth(sdata->dev, (u8 *) mgmt, len);
+ if (wk->auth_transaction == 4) {
+ ieee80211_auth_completed(sdata, wk);
+ return RX_MGMT_CFG80211_AUTH;
} else
- ieee80211_auth_challenge(sdata, mgmt, len);
+ ieee80211_auth_challenge(sdata, wk, mgmt, len);
break;
}
+
+ return RX_MGMT_NONE;
}
-static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len)
+static enum rx_mgmt_action __must_check
+ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ const u8 *bssid = NULL;
u16 reason_code;
if (len < 24 + 2)
- return;
+ return RX_MGMT_NONE;
- if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN))
- return;
+ ASSERT_MGD_MTX(ifmgd);
+
+ if (wk)
+ bssid = wk->bss->cbss.bssid;
+ else
+ bssid = ifmgd->associated->cbss.bssid;
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
- if (ifmgd->flags & IEEE80211_STA_AUTHENTICATED)
- printk(KERN_DEBUG "%s: deauthenticated (Reason: %u)\n",
- sdata->dev->name, reason_code);
+ printk(KERN_DEBUG "%s: deauthenticated from %pM (Reason: %u)\n",
+ sdata->dev->name, bssid, reason_code);
- if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) &&
- (ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE ||
- ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE ||
- ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)) {
- ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE;
- mod_timer(&ifmgd->timer, jiffies +
- IEEE80211_RETRY_AUTH_INTERVAL);
+ if (!wk) {
+ ieee80211_set_disassoc(sdata, true);
+ } else {
+ list_del(&wk->list);
+ kfree(wk);
}
- ieee80211_set_disassoc(sdata, true, false, 0);
- ifmgd->flags &= ~IEEE80211_STA_AUTHENTICATED;
- cfg80211_send_deauth(sdata->dev, (u8 *) mgmt, len);
+ return RX_MGMT_CFG80211_DEAUTH;
}
-static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len)
+static enum rx_mgmt_action __must_check
+ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u16 reason_code;
if (len < 24 + 2)
- return;
+ return RX_MGMT_NONE;
- if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN))
- return;
+ ASSERT_MGD_MTX(ifmgd);
+
+ if (WARN_ON(!ifmgd->associated))
+ return RX_MGMT_NONE;
+
+ if (WARN_ON(memcmp(ifmgd->associated->cbss.bssid, mgmt->sa, ETH_ALEN)))
+ return RX_MGMT_NONE;
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
- if (ifmgd->flags & IEEE80211_STA_ASSOCIATED)
- printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n",
- sdata->dev->name, reason_code);
+ printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n",
+ sdata->dev->name, reason_code);
- if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) &&
- ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED) {
- ifmgd->state = IEEE80211_STA_MLME_ASSOCIATE;
- mod_timer(&ifmgd->timer, jiffies +
- IEEE80211_RETRY_AUTH_INTERVAL);
- }
-
- ieee80211_set_disassoc(sdata, false, false, reason_code);
- cfg80211_send_disassoc(sdata->dev, (u8 *) mgmt, len);
+ ieee80211_set_disassoc(sdata, false);
+ return RX_MGMT_CFG80211_DISASSOC;
}
-static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len,
- int reassoc)
+static enum rx_mgmt_action __must_check
+ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgd_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len,
+ bool reassoc)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
@@ -1614,17 +1416,16 @@
bool have_higher_than_11mbit = false, newsta = false;
u16 ap_ht_cap_flags;
- /* AssocResp and ReassocResp have identical structure, so process both
- * of them in this function. */
-
- if (ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE)
- return;
+ /*
+ * AssocResp and ReassocResp have identical structure, so process both
+ * of them in this function.
+ */
if (len < 24 + 6)
- return;
+ return RX_MGMT_NONE;
- if (memcmp(ifmgd->bssid, mgmt->sa, ETH_ALEN) != 0)
- return;
+ if (memcmp(wk->bss->cbss.bssid, mgmt->sa, ETH_ALEN) != 0)
+ return RX_MGMT_NONE;
capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
@@ -1647,26 +1448,18 @@
printk(KERN_DEBUG "%s: AP rejected association temporarily; "
"comeback duration %u TU (%u ms)\n",
sdata->dev->name, tu, ms);
+ wk->timeout = jiffies + msecs_to_jiffies(ms);
if (ms > IEEE80211_ASSOC_TIMEOUT)
- mod_timer(&ifmgd->timer,
- jiffies + msecs_to_jiffies(ms));
- return;
+ run_again(ifmgd, jiffies + msecs_to_jiffies(ms));
+ return RX_MGMT_NONE;
}
if (status_code != WLAN_STATUS_SUCCESS) {
printk(KERN_DEBUG "%s: AP denied association (code=%d)\n",
sdata->dev->name, status_code);
- /* if this was a reassociation, ensure we try a "full"
- * association next time. This works around some broken APs
- * which do not correctly reject reassociation requests. */
- ifmgd->flags &= ~IEEE80211_STA_PREV_BSSID_SET;
- cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len);
- if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
- /* Wait for SME to decide what to do next */
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(local);
- }
- return;
+ list_del(&wk->list);
+ kfree(wk);
+ return RX_MGMT_CFG80211_ASSOC;
}
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
@@ -1677,52 +1470,36 @@
if (!elems.supp_rates) {
printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
sdata->dev->name);
- return;
+ return RX_MGMT_NONE;
}
printk(KERN_DEBUG "%s: associated\n", sdata->dev->name);
ifmgd->aid = aid;
- ifmgd->ap_capab = capab_info;
-
- kfree(ifmgd->assocresp_ies);
- ifmgd->assocresp_ies_len = len - (pos - (u8 *) mgmt);
- ifmgd->assocresp_ies = kmalloc(ifmgd->assocresp_ies_len, GFP_KERNEL);
- if (ifmgd->assocresp_ies)
- memcpy(ifmgd->assocresp_ies, pos, ifmgd->assocresp_ies_len);
rcu_read_lock();
/* Add STA entry for the AP */
- sta = sta_info_get(local, ifmgd->bssid);
+ sta = sta_info_get(local, wk->bss->cbss.bssid);
if (!sta) {
newsta = true;
- sta = sta_info_alloc(sdata, ifmgd->bssid, GFP_ATOMIC);
+ rcu_read_unlock();
+
+ sta = sta_info_alloc(sdata, wk->bss->cbss.bssid, GFP_KERNEL);
if (!sta) {
printk(KERN_DEBUG "%s: failed to alloc STA entry for"
" the AP\n", sdata->dev->name);
- rcu_read_unlock();
- return;
+ return RX_MGMT_NONE;
}
- /* update new sta with its last rx activity */
- sta->last_rx = jiffies;
+ set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC |
+ WLAN_STA_ASSOC_AP);
+ if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
+ set_sta_flags(sta, WLAN_STA_AUTHORIZED);
+
+ rcu_read_lock();
}
- /*
- * FIXME: Do we really need to update the sta_info's information here?
- * We already know about the AP (we found it in our list) so it
- * should already be filled with the right info, no?
- * As is stands, all this is racy because typically we assume
- * the information that is filled in here (except flags) doesn't
- * change while a STA structure is alive. As such, it should move
- * to between the sta_info_alloc() and sta_info_insert() above.
- */
-
- set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP);
- if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
- set_sta_flags(sta, WLAN_STA_AUTHORIZED);
-
rates = 0;
basic_rates = 0;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
@@ -1771,8 +1548,7 @@
else
sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
- /* If TKIP/WEP is used, no need to parse AP's HT capabilities */
- if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED))
+ if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
elems.ht_cap_elem, &sta->sta.ht_cap);
@@ -1792,7 +1568,7 @@
printk(KERN_DEBUG "%s: failed to insert STA entry for"
" the AP (error %d)\n", sdata->dev->name, err);
rcu_read_unlock();
- return;
+ return RX_MGMT_NONE;
}
}
@@ -1806,24 +1582,29 @@
if (elems.ht_info_elem && elems.wmm_param &&
(ifmgd->flags & IEEE80211_STA_WMM_ENABLED) &&
- !(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED))
+ !(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
+ wk->bss->cbss.bssid,
ap_ht_cap_flags);
+ /* delete work item -- must be before set_associated for PS */
+ list_del(&wk->list);
+
/* set AID and assoc capability,
* ieee80211_set_associated() will tell the driver */
bss_conf->aid = aid;
bss_conf->assoc_capability = capab_info;
- ieee80211_set_associated(sdata, changed);
+ /* this will take ownership of wk */
+ ieee80211_set_associated(sdata, wk, changed);
/*
- * initialise the time of last beacon to be the association time,
- * otherwise beacon loss check will trigger immediately
+ * Start timer to probe the connection to the AP now.
+ * Also start the timer that will detect beacon loss.
*/
- ifmgd->last_beacon = jiffies;
+ ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
+ mod_beacon_timer(sdata);
- ieee80211_associated(sdata);
- cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, len);
+ return RX_MGMT_CFG80211_ASSOC;
}
@@ -1851,23 +1632,25 @@
bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
channel, beacon);
- if (!bss)
+ if (bss)
+ ieee80211_rx_bss_put(local, bss);
+
+ if (!sdata->u.mgd.associated)
return;
if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) &&
- (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN) == 0)) {
+ (memcmp(mgmt->bssid, sdata->u.mgd.associated->cbss.bssid,
+ ETH_ALEN) == 0)) {
struct ieee80211_channel_sw_ie *sw_elem =
(struct ieee80211_channel_sw_ie *)elems->ch_switch_elem;
ieee80211_sta_process_chanswitch(sdata, sw_elem, bss);
}
-
- ieee80211_rx_bss_put(local, bss);
}
static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len,
+ struct ieee80211_mgd_work *wk,
+ struct ieee80211_mgmt *mgmt, size_t len,
struct ieee80211_rx_status *rx_status)
{
struct ieee80211_if_managed *ifmgd;
@@ -1876,6 +1659,8 @@
ifmgd = &sdata->u.mgd;
+ ASSERT_MGD_MTX(ifmgd);
+
if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
return; /* ignore ProbeResp to foreign address */
@@ -1889,17 +1674,32 @@
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
/* direct probe may be part of the association flow */
- if (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE) {
+ if (wk && wk->state == IEEE80211_MGD_STATE_PROBE) {
printk(KERN_DEBUG "%s direct probe responded\n",
sdata->dev->name);
- ieee80211_authenticate(sdata);
+ wk->tries = 0;
+ wk->state = IEEE80211_MGD_STATE_AUTH;
+ WARN_ON(ieee80211_authenticate(sdata, wk) != RX_MGMT_NONE);
}
- if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
- ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+ if (ifmgd->associated &&
+ memcmp(mgmt->bssid, ifmgd->associated->cbss.bssid, ETH_ALEN) == 0 &&
+ ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL)) {
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_ps(sdata->local, -1);
mutex_unlock(&sdata->local->iflist_mtx);
+ /*
+ * We've received a probe response, but are not sure whether
+ * we have or will be receiving any beacons or data, so let's
+ * schedule the timers again, just in case.
+ */
+ mod_beacon_timer(sdata);
+ mod_timer(&ifmgd->conn_mon_timer,
+ round_jiffies_up(jiffies +
+ IEEE80211_CONNECTION_IDLE_TIME));
}
}
@@ -1937,6 +1737,9 @@
bool erp_valid, directed_tim = false;
u8 erp_value = 0;
u32 ncrc;
+ u8 *bssid;
+
+ ASSERT_MGD_MTX(ifmgd);
/* Process beacon from the current BSS */
baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
@@ -1946,23 +1749,41 @@
if (rx_status->freq != local->hw.conf.channel->center_freq)
return;
- if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED) ||
- memcmp(ifmgd->bssid, mgmt->bssid, ETH_ALEN) != 0)
+ /*
+ * We might have received a number of frames, among them a
+ * disassoc frame and a beacon...
+ */
+ if (!ifmgd->associated)
return;
- if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
+ bssid = ifmgd->associated->cbss.bssid;
+
+ /*
+ * And in theory even frames from a different AP we were just
+ * associated to a split-second ago!
+ */
+ if (memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0)
+ return;
+
+ if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: cancelling probereq poll due "
"to a received beacon\n", sdata->dev->name);
}
#endif
- ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+ ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
}
+ /*
+ * Push the beacon loss detection into the future since
+ * we are processing a beacon from the AP just now.
+ */
+ mod_beacon_timer(sdata);
+
ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
len - baselen, &elems,
@@ -2019,15 +1840,15 @@
if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
- !(ifmgd->flags & IEEE80211_STA_TKIP_WEP_USED)) {
+ !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) {
struct sta_info *sta;
struct ieee80211_supported_band *sband;
u16 ap_ht_cap_flags;
rcu_read_lock();
- sta = sta_info_get(local, ifmgd->bssid);
- if (!sta) {
+ sta = sta_info_get(local, bssid);
+ if (WARN_ON(!sta)) {
rcu_read_unlock();
return;
}
@@ -2042,15 +1863,11 @@
rcu_read_unlock();
changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
- ap_ht_cap_flags);
+ bssid, ap_ht_cap_flags);
}
+ /* Note: country IE parsing is done for us by cfg80211 */
if (elems.country_elem) {
- /* Note we are only reviewing this on beacons
- * for the BSSID we are associated to */
- regulatory_hint_11d(local->hw.wiphy,
- elems.country_elem, elems.country_elem_len);
-
/* TODO: IBSS also needs this */
if (elems.pwr_constr_elem)
ieee80211_handle_pwr_constr(sdata,
@@ -2063,8 +1880,7 @@
}
ieee80211_rx_result ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status)
+ struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_mgmt *mgmt;
@@ -2080,14 +1896,14 @@
case IEEE80211_STYPE_PROBE_REQ:
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
- memcpy(skb->cb, rx_status, sizeof(*rx_status));
case IEEE80211_STYPE_AUTH:
case IEEE80211_STYPE_ASSOC_RESP:
case IEEE80211_STYPE_REASSOC_RESP:
case IEEE80211_STYPE_DEAUTH:
case IEEE80211_STYPE_DISASSOC:
+ case IEEE80211_STYPE_ACTION:
skb_queue_tail(&sdata->u.mgd.skb_queue, skb);
- queue_work(local->hw.workqueue, &sdata->u.mgd.work);
+ ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
return RX_QUEUED;
}
@@ -2097,40 +1913,119 @@
static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_rx_status *rx_status;
struct ieee80211_mgmt *mgmt;
+ struct ieee80211_mgd_work *wk;
+ enum rx_mgmt_action rma = RX_MGMT_NONE;
u16 fc;
rx_status = (struct ieee80211_rx_status *) skb->cb;
mgmt = (struct ieee80211_mgmt *) skb->data;
fc = le16_to_cpu(mgmt->frame_control);
- switch (fc & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_PROBE_RESP:
- ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len,
- rx_status);
- break;
- case IEEE80211_STYPE_BEACON:
- ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
- rx_status);
- break;
- case IEEE80211_STYPE_AUTH:
- ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
- break;
- case IEEE80211_STYPE_ASSOC_RESP:
- ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len, 0);
- break;
- case IEEE80211_STYPE_REASSOC_RESP:
- ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len, 1);
- break;
- case IEEE80211_STYPE_DEAUTH:
- ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
- break;
- case IEEE80211_STYPE_DISASSOC:
- ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
+ mutex_lock(&ifmgd->mtx);
+
+ if (ifmgd->associated &&
+ memcmp(ifmgd->associated->cbss.bssid, mgmt->bssid,
+ ETH_ALEN) == 0) {
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_BEACON:
+ ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
+ rx_status);
+ break;
+ case IEEE80211_STYPE_PROBE_RESP:
+ ieee80211_rx_mgmt_probe_resp(sdata, NULL, mgmt,
+ skb->len, rx_status);
+ break;
+ case IEEE80211_STYPE_DEAUTH:
+ rma = ieee80211_rx_mgmt_deauth(sdata, NULL,
+ mgmt, skb->len);
+ break;
+ case IEEE80211_STYPE_DISASSOC:
+ rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
+ break;
+ case IEEE80211_STYPE_ACTION:
+ /* XXX: differentiate, can only happen for CSA now! */
+ ieee80211_sta_process_chanswitch(sdata,
+ &mgmt->u.action.u.chan_switch.sw_elem,
+ ifmgd->associated);
+ break;
+ }
+ mutex_unlock(&ifmgd->mtx);
+
+ switch (rma) {
+ case RX_MGMT_NONE:
+ /* no action */
+ break;
+ case RX_MGMT_CFG80211_DEAUTH:
+ cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len,
+ NULL);
+ break;
+ case RX_MGMT_CFG80211_DISASSOC:
+ cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len,
+ NULL);
+ break;
+ default:
+ WARN(1, "unexpected: %d", rma);
+ }
+ goto out;
+ }
+
+ list_for_each_entry(wk, &ifmgd->work_list, list) {
+ if (memcmp(wk->bss->cbss.bssid, mgmt->bssid, ETH_ALEN) != 0)
+ continue;
+
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_PROBE_RESP:
+ ieee80211_rx_mgmt_probe_resp(sdata, wk, mgmt, skb->len,
+ rx_status);
+ break;
+ case IEEE80211_STYPE_AUTH:
+ rma = ieee80211_rx_mgmt_auth(sdata, wk, mgmt, skb->len);
+ break;
+ case IEEE80211_STYPE_ASSOC_RESP:
+ rma = ieee80211_rx_mgmt_assoc_resp(sdata, wk, mgmt,
+ skb->len, false);
+ break;
+ case IEEE80211_STYPE_REASSOC_RESP:
+ rma = ieee80211_rx_mgmt_assoc_resp(sdata, wk, mgmt,
+ skb->len, true);
+ break;
+ case IEEE80211_STYPE_DEAUTH:
+ rma = ieee80211_rx_mgmt_deauth(sdata, wk, mgmt,
+ skb->len);
+ break;
+ }
+ /*
+ * We've processed this frame for that work, so it can't
+ * belong to another work struct.
+ * NB: this is also required for correctness because the
+ * called functions can free 'wk', and for 'rma'!
+ */
break;
}
+ mutex_unlock(&ifmgd->mtx);
+
+ switch (rma) {
+ case RX_MGMT_NONE:
+ /* no action */
+ break;
+ case RX_MGMT_CFG80211_AUTH:
+ cfg80211_send_rx_auth(sdata->dev, (u8 *) mgmt, skb->len);
+ break;
+ case RX_MGMT_CFG80211_ASSOC:
+ cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, skb->len);
+ break;
+ case RX_MGMT_CFG80211_DEAUTH:
+ cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len, NULL);
+ break;
+ default:
+ WARN(1, "unexpected: %d", rma);
+ }
+
+ out:
kfree_skb(skb);
}
@@ -2146,125 +2041,9 @@
return;
}
- set_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request);
- queue_work(local->hw.workqueue, &ifmgd->work);
+ ieee80211_queue_work(&local->hw, &ifmgd->work);
}
-static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
-
- /* Reset own TSF to allow time synchronization work. */
- drv_reset_tsf(local);
-
- ifmgd->wmm_last_param_set = -1; /* allow any WMM update */
-
-
- if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_OPEN)
- ifmgd->auth_alg = WLAN_AUTH_OPEN;
- else if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_SHARED_KEY)
- ifmgd->auth_alg = WLAN_AUTH_SHARED_KEY;
- else if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_LEAP)
- ifmgd->auth_alg = WLAN_AUTH_LEAP;
- else if (ifmgd->auth_algs & IEEE80211_AUTH_ALG_FT)
- ifmgd->auth_alg = WLAN_AUTH_FT;
- else
- ifmgd->auth_alg = WLAN_AUTH_OPEN;
- ifmgd->auth_transaction = -1;
- ifmgd->flags &= ~IEEE80211_STA_ASSOCIATED;
- ifmgd->assoc_scan_tries = 0;
- ifmgd->direct_probe_tries = 0;
- ifmgd->auth_tries = 0;
- ifmgd->assoc_tries = 0;
- netif_tx_stop_all_queues(sdata->dev);
- netif_carrier_off(sdata->dev);
-}
-
-static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_bss *bss;
- u8 *bssid = ifmgd->bssid, *ssid = ifmgd->ssid;
- u8 ssid_len = ifmgd->ssid_len;
- u16 capa_mask = WLAN_CAPABILITY_ESS;
- u16 capa_val = WLAN_CAPABILITY_ESS;
- struct ieee80211_channel *chan = local->oper_channel;
-
- if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) &&
- ifmgd->flags & (IEEE80211_STA_AUTO_SSID_SEL |
- IEEE80211_STA_AUTO_BSSID_SEL |
- IEEE80211_STA_AUTO_CHANNEL_SEL)) {
- capa_mask |= WLAN_CAPABILITY_PRIVACY;
- if (sdata->default_key)
- capa_val |= WLAN_CAPABILITY_PRIVACY;
- }
-
- if (ifmgd->flags & IEEE80211_STA_AUTO_CHANNEL_SEL)
- chan = NULL;
-
- if (ifmgd->flags & IEEE80211_STA_AUTO_BSSID_SEL)
- bssid = NULL;
-
- if (ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL) {
- ssid = NULL;
- ssid_len = 0;
- }
-
- bss = (void *)cfg80211_get_bss(local->hw.wiphy, chan,
- bssid, ssid, ssid_len,
- capa_mask, capa_val);
-
- if (bss) {
- local->oper_channel = bss->cbss.channel;
- local->oper_channel_type = NL80211_CHAN_NO_HT;
- ieee80211_hw_config(local, 0);
-
- if (!(ifmgd->flags & IEEE80211_STA_SSID_SET))
- ieee80211_sta_set_ssid(sdata, bss->ssid,
- bss->ssid_len);
- ieee80211_sta_set_bssid(sdata, bss->cbss.bssid);
- ieee80211_sta_def_wmm_params(sdata, bss->supp_rates_len,
- bss->supp_rates);
- if (sdata->u.mgd.mfp == IEEE80211_MFP_REQUIRED)
- sdata->u.mgd.flags |= IEEE80211_STA_MFP_ENABLED;
- else
- sdata->u.mgd.flags &= ~IEEE80211_STA_MFP_ENABLED;
-
- /* Send out direct probe if no probe resp was received or
- * the one we have is outdated
- */
- if (!bss->last_probe_resp ||
- time_after(jiffies, bss->last_probe_resp
- + IEEE80211_SCAN_RESULT_EXPIRE))
- ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE;
- else
- ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE;
-
- ieee80211_rx_bss_put(local, bss);
- ieee80211_sta_reset_auth(sdata);
- return 0;
- } else {
- if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) {
-
- ifmgd->assoc_scan_tries++;
-
- ieee80211_request_internal_scan(sdata, ifmgd->ssid,
- ssid_len);
-
- ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE;
- set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
- } else {
- ifmgd->assoc_scan_tries = 0;
- ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_recalc_idle(local);
- }
- }
- return -1;
-}
-
-
static void ieee80211_sta_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
@@ -2272,89 +2051,206 @@
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd;
struct sk_buff *skb;
+ struct ieee80211_mgd_work *wk, *tmp;
+ LIST_HEAD(free_work);
+ enum rx_mgmt_action rma;
+ bool anybusy = false;
if (!netif_running(sdata->dev))
return;
- if (local->sw_scanning || local->hw_scanning)
+ if (local->scanning)
return;
if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
return;
/*
- * Nothing should have been stuffed into the workqueue during
- * the suspend->resume cycle. If this WARN is seen then there
- * is a bug with either the driver suspend or something in
- * mac80211 stuffing into the workqueue which we haven't yet
- * cleared during mac80211's suspend cycle.
+ * ieee80211_queue_work() should have picked up most cases,
+ * here we'll pick the the rest.
*/
- if (WARN_ON(local->suspended))
+ if (WARN(local->suspended, "STA MLME work scheduled while "
+ "going to suspend\n"))
return;
ifmgd = &sdata->u.mgd;
+ /* first process frames to avoid timing out while a frame is pending */
while ((skb = skb_dequeue(&ifmgd->skb_queue)))
ieee80211_sta_rx_queued_mgmt(sdata, skb);
- if (ifmgd->state != IEEE80211_STA_MLME_DIRECT_PROBE &&
- ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE &&
- ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE &&
- test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request)) {
- queue_delayed_work(local->hw.workqueue, &local->scan_work,
- round_jiffies_relative(0));
- return;
+ /* then process the rest of the work */
+ mutex_lock(&ifmgd->mtx);
+
+ if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL) &&
+ ifmgd->associated) {
+ u8 bssid[ETH_ALEN];
+
+ memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN);
+ if (time_is_after_jiffies(ifmgd->probe_timeout))
+ run_again(ifmgd, ifmgd->probe_timeout);
+
+ else if (ifmgd->probe_send_count < IEEE80211_MAX_PROBE_TRIES) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "No probe response from AP %pM"
+ " after %dms, try %d\n", bssid,
+ (1000 * IEEE80211_PROBE_WAIT)/HZ,
+ ifmgd->probe_send_count);
+#endif
+ ieee80211_mgd_probe_ap_send(sdata);
+ } else {
+ /*
+ * We actually lost the connection ... or did we?
+ * Let's make sure!
+ */
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ printk(KERN_DEBUG "No probe response from AP %pM"
+ " after %dms, disconnecting.\n",
+ bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
+ ieee80211_set_disassoc(sdata, true);
+ mutex_unlock(&ifmgd->mtx);
+ /*
+ * must be outside lock due to cfg80211,
+ * but that's not a problem.
+ */
+ ieee80211_send_deauth_disassoc(sdata, bssid,
+ IEEE80211_STYPE_DEAUTH,
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+ NULL);
+ mutex_lock(&ifmgd->mtx);
+ }
}
- if (test_and_clear_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request)) {
- if (ieee80211_sta_config_auth(sdata))
- return;
- clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request);
- } else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request))
- return;
ieee80211_recalc_idle(local);
- switch (ifmgd->state) {
- case IEEE80211_STA_MLME_DISABLED:
- break;
- case IEEE80211_STA_MLME_DIRECT_PROBE:
- ieee80211_direct_probe(sdata);
- break;
- case IEEE80211_STA_MLME_AUTHENTICATE:
- ieee80211_authenticate(sdata);
- break;
- case IEEE80211_STA_MLME_ASSOCIATE:
- ieee80211_associate(sdata);
- break;
- case IEEE80211_STA_MLME_ASSOCIATED:
- ieee80211_associated(sdata);
- break;
- default:
- WARN_ON(1);
- break;
+ list_for_each_entry_safe(wk, tmp, &ifmgd->work_list, list) {
+ if (time_is_after_jiffies(wk->timeout)) {
+ /*
+ * This work item isn't supposed to be worked on
+ * right now, but take care to adjust the timer
+ * properly.
+ */
+ run_again(ifmgd, wk->timeout);
+ continue;
+ }
+
+ switch (wk->state) {
+ default:
+ WARN_ON(1);
+ /* fall through */
+ case IEEE80211_MGD_STATE_IDLE:
+ /* nothing */
+ rma = RX_MGMT_NONE;
+ break;
+ case IEEE80211_MGD_STATE_PROBE:
+ rma = ieee80211_direct_probe(sdata, wk);
+ break;
+ case IEEE80211_MGD_STATE_AUTH:
+ rma = ieee80211_authenticate(sdata, wk);
+ break;
+ case IEEE80211_MGD_STATE_ASSOC:
+ rma = ieee80211_associate(sdata, wk);
+ break;
+ }
+
+ switch (rma) {
+ case RX_MGMT_NONE:
+ /* no action required */
+ break;
+ case RX_MGMT_CFG80211_AUTH_TO:
+ case RX_MGMT_CFG80211_ASSOC_TO:
+ list_del(&wk->list);
+ list_add(&wk->list, &free_work);
+ wk->tries = rma; /* small abuse but only local */
+ break;
+ default:
+ WARN(1, "unexpected: %d", rma);
+ }
}
- if (ieee80211_privacy_mismatch(sdata)) {
- printk(KERN_DEBUG "%s: privacy configuration mismatch and "
- "mixed-cell disabled - disassociate\n", sdata->dev->name);
-
- ieee80211_set_disassoc(sdata, false, true,
- WLAN_REASON_UNSPECIFIED);
+ list_for_each_entry(wk, &ifmgd->work_list, list) {
+ if (wk->state != IEEE80211_MGD_STATE_IDLE) {
+ anybusy = true;
+ break;
+ }
}
+ if (!anybusy &&
+ test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request))
+ ieee80211_queue_delayed_work(&local->hw,
+ &local->scan_work,
+ round_jiffies_relative(0));
+
+ mutex_unlock(&ifmgd->mtx);
+
+ list_for_each_entry_safe(wk, tmp, &free_work, list) {
+ switch (wk->tries) {
+ case RX_MGMT_CFG80211_AUTH_TO:
+ cfg80211_send_auth_timeout(sdata->dev,
+ wk->bss->cbss.bssid);
+ break;
+ case RX_MGMT_CFG80211_ASSOC_TO:
+ cfg80211_send_assoc_timeout(sdata->dev,
+ wk->bss->cbss.bssid);
+ break;
+ default:
+ WARN(1, "unexpected: %d", wk->tries);
+ }
+
+ list_del(&wk->list);
+ kfree(wk);
+ }
+
+ ieee80211_recalc_idle(local);
+}
+
+static void ieee80211_sta_bcn_mon_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata =
+ (struct ieee80211_sub_if_data *) data;
+ struct ieee80211_local *local = sdata->local;
+
+ if (local->quiescing)
+ return;
+
+ ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_loss_work);
+}
+
+static void ieee80211_sta_conn_mon_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata =
+ (struct ieee80211_sub_if_data *) data;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ struct ieee80211_local *local = sdata->local;
+
+ if (local->quiescing)
+ return;
+
+ ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
+}
+
+static void ieee80211_sta_monitor_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ u.mgd.monitor_work);
+
+ ieee80211_mgd_probe_ap(sdata, false);
}
static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
{
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- /*
- * Need to update last_beacon to avoid beacon loss
- * test to trigger.
- */
- sdata->u.mgd.last_beacon = jiffies;
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL);
-
- queue_work(sdata->local->hw.workqueue,
+ /* let's probe the connection once */
+ ieee80211_queue_work(&sdata->local->hw,
+ &sdata->u.mgd.monitor_work);
+ /* and do all the other regular work too */
+ ieee80211_queue_work(&sdata->local->hw,
&sdata->u.mgd.work);
}
}
@@ -2378,6 +2274,11 @@
cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
+
+ cancel_work_sync(&ifmgd->monitor_work);
+ /* these will just be re-established on connection */
+ del_timer_sync(&ifmgd->conn_mon_timer);
+ del_timer_sync(&ifmgd->bcn_mon_timer);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
@@ -2395,185 +2296,30 @@
void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd;
- u32 hw_flags;
ifmgd = &sdata->u.mgd;
INIT_WORK(&ifmgd->work, ieee80211_sta_work);
+ INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
INIT_WORK(&ifmgd->beacon_loss_work, ieee80211_beacon_loss_work);
setup_timer(&ifmgd->timer, ieee80211_sta_timer,
(unsigned long) sdata);
+ setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
+ (unsigned long) sdata);
+ setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
+ (unsigned long) sdata);
setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
(unsigned long) sdata);
skb_queue_head_init(&ifmgd->skb_queue);
+ INIT_LIST_HEAD(&ifmgd->work_list);
+
ifmgd->capab = WLAN_CAPABILITY_ESS;
- ifmgd->auth_algs = IEEE80211_AUTH_ALG_OPEN |
- IEEE80211_AUTH_ALG_SHARED_KEY;
- ifmgd->flags |= IEEE80211_STA_CREATE_IBSS |
- IEEE80211_STA_AUTO_BSSID_SEL |
- IEEE80211_STA_AUTO_CHANNEL_SEL;
+ ifmgd->flags = 0;
if (sdata->local->hw.queues >= 4)
ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
- hw_flags = sdata->local->hw.flags;
-
- if (hw_flags & IEEE80211_HW_SUPPORTS_PS) {
- ifmgd->powersave = CONFIG_MAC80211_DEFAULT_PS_VALUE;
- sdata->local->hw.conf.dynamic_ps_timeout = 500;
- }
-}
-
-/* configuration hooks */
-void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct ieee80211_local *local = sdata->local;
-
- if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
- return;
-
- if ((ifmgd->flags & (IEEE80211_STA_BSSID_SET |
- IEEE80211_STA_AUTO_BSSID_SEL)) &&
- (ifmgd->flags & (IEEE80211_STA_SSID_SET |
- IEEE80211_STA_AUTO_SSID_SEL))) {
-
- if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
- ieee80211_set_disassoc(sdata, true, true,
- WLAN_REASON_DEAUTH_LEAVING);
-
- if (ifmgd->ssid_len == 0) {
- /*
- * Only allow association to be started if a valid SSID
- * is configured.
- */
- return;
- }
-
- if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) ||
- ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE)
- set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
- else if (ifmgd->flags & IEEE80211_STA_EXT_SME)
- set_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request);
- queue_work(local->hw.workqueue, &ifmgd->work);
- }
-}
-
-int ieee80211_sta_commit(struct ieee80211_sub_if_data *sdata)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
- if (ifmgd->ssid_len)
- ifmgd->flags |= IEEE80211_STA_SSID_SET;
- else
- ifmgd->flags &= ~IEEE80211_STA_SSID_SET;
-
- return 0;
-}
-
-int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t len)
-{
- struct ieee80211_if_managed *ifmgd;
-
- if (len > IEEE80211_MAX_SSID_LEN)
- return -EINVAL;
-
- ifmgd = &sdata->u.mgd;
-
- if (ifmgd->ssid_len != len || memcmp(ifmgd->ssid, ssid, len) != 0) {
- if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
- ieee80211_set_disassoc(sdata, true, true,
- WLAN_REASON_DEAUTH_LEAVING);
-
- /*
- * Do not use reassociation if SSID is changed (different ESS).
- */
- ifmgd->flags &= ~IEEE80211_STA_PREV_BSSID_SET;
- memset(ifmgd->ssid, 0, sizeof(ifmgd->ssid));
- memcpy(ifmgd->ssid, ssid, len);
- ifmgd->ssid_len = len;
- }
-
- return ieee80211_sta_commit(sdata);
-}
-
-int ieee80211_sta_get_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size_t *len)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- memcpy(ssid, ifmgd->ssid, ifmgd->ssid_len);
- *len = ifmgd->ssid_len;
- return 0;
-}
-
-int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
- if (compare_ether_addr(bssid, ifmgd->bssid) != 0 &&
- ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
- ieee80211_set_disassoc(sdata, true, true,
- WLAN_REASON_DEAUTH_LEAVING);
-
- if (is_valid_ether_addr(bssid)) {
- memcpy(ifmgd->bssid, bssid, ETH_ALEN);
- ifmgd->flags |= IEEE80211_STA_BSSID_SET;
- } else {
- memset(ifmgd->bssid, 0, ETH_ALEN);
- ifmgd->flags &= ~IEEE80211_STA_BSSID_SET;
- }
-
- return ieee80211_sta_commit(sdata);
-}
-
-int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
- const char *ie, size_t len)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
- if (len == 0 && ifmgd->extra_ie_len == 0)
- return -EALREADY;
-
- if (len == ifmgd->extra_ie_len && ifmgd->extra_ie &&
- memcmp(ifmgd->extra_ie, ie, len) == 0)
- return -EALREADY;
-
- kfree(ifmgd->extra_ie);
- if (len == 0) {
- ifmgd->extra_ie = NULL;
- ifmgd->extra_ie_len = 0;
- return 0;
- }
- ifmgd->extra_ie = kmalloc(len, GFP_KERNEL);
- if (!ifmgd->extra_ie) {
- ifmgd->extra_ie_len = 0;
- return -ENOMEM;
- }
- memcpy(ifmgd->extra_ie, ie, len);
- ifmgd->extra_ie_len = len;
- return 0;
-}
-
-int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason)
-{
- printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
- sdata->dev->name, reason);
-
- ieee80211_set_disassoc(sdata, true, true, reason);
- return 0;
-}
-
-int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason)
-{
- struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
-
- printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
- sdata->dev->name, reason);
-
- if (!(ifmgd->flags & IEEE80211_STA_ASSOCIATED))
- return -ENOLINK;
-
- ieee80211_set_disassoc(sdata, false, true, reason);
- return 0;
+ mutex_init(&ifmgd->mtx);
}
/* scan finished notification */
@@ -2602,3 +2348,225 @@
return 0;
}
+
+/* config hooks */
+int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_auth_request *req)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ const u8 *ssid;
+ struct ieee80211_mgd_work *wk;
+ u16 auth_alg;
+
+ switch (req->auth_type) {
+ case NL80211_AUTHTYPE_OPEN_SYSTEM:
+ auth_alg = WLAN_AUTH_OPEN;
+ break;
+ case NL80211_AUTHTYPE_SHARED_KEY:
+ auth_alg = WLAN_AUTH_SHARED_KEY;
+ break;
+ case NL80211_AUTHTYPE_FT:
+ auth_alg = WLAN_AUTH_FT;
+ break;
+ case NL80211_AUTHTYPE_NETWORK_EAP:
+ auth_alg = WLAN_AUTH_LEAP;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ wk = kzalloc(sizeof(*wk) + req->ie_len, GFP_KERNEL);
+ if (!wk)
+ return -ENOMEM;
+
+ wk->bss = (void *)req->bss;
+
+ if (req->ie && req->ie_len) {
+ memcpy(wk->ie, req->ie, req->ie_len);
+ wk->ie_len = req->ie_len;
+ }
+
+ if (req->key && req->key_len) {
+ wk->key_len = req->key_len;
+ wk->key_idx = req->key_idx;
+ memcpy(wk->key, req->key, req->key_len);
+ }
+
+ ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
+ memcpy(wk->ssid, ssid + 2, ssid[1]);
+ wk->ssid_len = ssid[1];
+
+ wk->state = IEEE80211_MGD_STATE_PROBE;
+ wk->auth_alg = auth_alg;
+ wk->timeout = jiffies; /* run right away */
+
+ /*
+ * XXX: if still associated need to tell AP that we're going
+ * to sleep and then change channel etc.
+ */
+ sdata->local->oper_channel = req->bss->channel;
+ ieee80211_hw_config(sdata->local, 0);
+
+ mutex_lock(&ifmgd->mtx);
+ list_add(&wk->list, &sdata->u.mgd.work_list);
+ mutex_unlock(&ifmgd->mtx);
+
+ ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.work);
+ return 0;
+}
+
+int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_assoc_request *req)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ struct ieee80211_mgd_work *wk, *found = NULL;
+ int i, err;
+
+ mutex_lock(&ifmgd->mtx);
+
+ list_for_each_entry(wk, &ifmgd->work_list, list) {
+ if (&wk->bss->cbss == req->bss &&
+ wk->state == IEEE80211_MGD_STATE_IDLE) {
+ found = wk;
+ break;
+ }
+ }
+
+ if (!found) {
+ err = -ENOLINK;
+ goto out;
+ }
+
+ list_del(&found->list);
+
+ wk = krealloc(found, sizeof(*wk) + req->ie_len, GFP_KERNEL);
+ if (!wk) {
+ list_add(&found->list, &ifmgd->work_list);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ list_add(&wk->list, &ifmgd->work_list);
+
+ ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N;
+
+ for (i = 0; i < req->crypto.n_ciphers_pairwise; i++)
+ if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
+ req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
+ req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
+
+ sdata->local->oper_channel = req->bss->channel;
+ ieee80211_hw_config(sdata->local, 0);
+
+ if (req->ie && req->ie_len) {
+ memcpy(wk->ie, req->ie, req->ie_len);
+ wk->ie_len = req->ie_len;
+ } else
+ wk->ie_len = 0;
+
+ if (req->prev_bssid)
+ memcpy(wk->prev_bssid, req->prev_bssid, ETH_ALEN);
+
+ wk->state = IEEE80211_MGD_STATE_ASSOC;
+ wk->tries = 0;
+ wk->timeout = jiffies; /* run right away */
+
+ if (req->use_mfp) {
+ ifmgd->mfp = IEEE80211_MFP_REQUIRED;
+ ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
+ } else {
+ ifmgd->mfp = IEEE80211_MFP_DISABLED;
+ ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
+ }
+
+ if (req->crypto.control_port)
+ ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
+ else
+ ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
+
+ ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.work);
+
+ err = 0;
+
+ out:
+ mutex_unlock(&ifmgd->mtx);
+ return err;
+}
+
+int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_deauth_request *req,
+ void *cookie)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ struct ieee80211_mgd_work *wk;
+ const u8 *bssid = NULL;
+
+ printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
+ sdata->dev->name, req->reason_code);
+
+ mutex_lock(&ifmgd->mtx);
+
+ if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) {
+ bssid = req->bss->bssid;
+ ieee80211_set_disassoc(sdata, true);
+ } else list_for_each_entry(wk, &ifmgd->work_list, list) {
+ if (&wk->bss->cbss == req->bss) {
+ bssid = req->bss->bssid;
+ list_del(&wk->list);
+ kfree(wk);
+ break;
+ }
+ }
+
+ /*
+ * cfg80211 should catch this ... but it's racy since
+ * we can receive a deauth frame, process it, hand it
+ * to cfg80211 while that's in a locked section already
+ * trying to tell us that the user wants to disconnect.
+ */
+ if (!bssid) {
+ mutex_unlock(&ifmgd->mtx);
+ return -ENOLINK;
+ }
+
+ mutex_unlock(&ifmgd->mtx);
+
+ ieee80211_send_deauth_disassoc(sdata, bssid,
+ IEEE80211_STYPE_DEAUTH, req->reason_code,
+ cookie);
+
+ return 0;
+}
+
+int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_disassoc_request *req,
+ void *cookie)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+ printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
+ sdata->dev->name, req->reason_code);
+
+ mutex_lock(&ifmgd->mtx);
+
+ /*
+ * cfg80211 should catch this ... but it's racy since
+ * we can receive a disassoc frame, process it, hand it
+ * to cfg80211 while that's in a locked section already
+ * trying to tell us that the user wants to disconnect.
+ */
+ if (&ifmgd->associated->cbss != req->bss) {
+ mutex_unlock(&ifmgd->mtx);
+ return -ENOLINK;
+ }
+
+ ieee80211_set_disassoc(sdata, false);
+
+ mutex_unlock(&ifmgd->mtx);
+
+ ieee80211_send_deauth_disassoc(sdata, req->bss->bssid,
+ IEEE80211_STYPE_DISASSOC, req->reason_code,
+ cookie);
+ return 0;
+}
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 5e3d476..e535f1c 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -26,7 +26,7 @@
/* make quiescing visible to timers everywhere */
mb();
- flush_workqueue(local->hw.workqueue);
+ flush_workqueue(local->workqueue);
/* Don't try to run timers while suspended. */
del_timer_sync(&local->sta_cleanup);
@@ -96,6 +96,10 @@
if (!netif_running(sdata->dev))
continue;
+ /* disable beaconing */
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_BEACON_ENABLED);
+
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
conf.mac_addr = sdata->dev->dev_addr;
@@ -103,17 +107,8 @@
}
/* stop hardware - this must stop RX */
- if (local->open_count) {
- ieee80211_led_radio(local, false);
- drv_stop(local);
- }
-
- /*
- * flush again, in case driver queued work -- it
- * shouldn't be doing (or cancel everything in the
- * stop callback) that but better safe than sorry.
- */
- flush_workqueue(local->hw.workqueue);
+ if (local->open_count)
+ ieee80211_stop_device(local);
local->suspended = true;
/* need suspended to be visible before quiescing is false */
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 4641f00..b33efc4 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -198,6 +198,35 @@
kfree(ctrl_ref);
}
+static bool rc_no_data_or_no_ack(struct ieee80211_tx_rate_control *txrc)
+{
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ __le16 fc;
+
+ fc = hdr->frame_control;
+
+ return ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !ieee80211_is_data(fc));
+}
+
+bool rate_control_send_low(struct ieee80211_sta *sta,
+ void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
+
+ if (!sta || !priv_sta || rc_no_data_or_no_ack(txrc)) {
+ info->control.rates[0].idx = rate_lowest_index(txrc->sband, sta);
+ info->control.rates[0].count =
+ (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+ 1 : txrc->hw->max_rate_tries;
+ return true;
+ }
+ return false;
+}
+EXPORT_SYMBOL(rate_control_send_low);
+
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_tx_rate_control *txrc)
@@ -258,7 +287,7 @@
struct rate_control_ref *ref, *old;
ASSERT_RTNL();
- if (local->open_count || netif_running(local->mdev))
+ if (local->open_count)
return -EBUSY;
ref = rate_control_alloc(name, local);
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 37771ab..7c51429 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -70,20 +70,6 @@
return i;
}
-static inline bool
-use_low_rate(struct sk_buff *skb)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- u16 fc;
-
- fc = le16_to_cpu(hdr->frame_control);
-
- return ((info->flags & IEEE80211_TX_CTL_NO_ACK) ||
- (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA);
-}
-
-
static void
minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
{
@@ -232,7 +218,6 @@
void *priv_sta, struct ieee80211_tx_rate_control *txrc)
{
struct sk_buff *skb = txrc->skb;
- struct ieee80211_supported_band *sband = txrc->sband;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct minstrel_sta_info *mi = priv_sta;
struct minstrel_priv *mp = priv;
@@ -245,14 +230,8 @@
int mrr_ndx[3];
int sample_rate;
- if (!sta || !mi || use_low_rate(skb)) {
- ar[0].idx = rate_lowest_index(sband, sta);
- if (info->flags & IEEE80211_TX_CTL_NO_ACK)
- ar[0].count = 1;
- else
- ar[0].count = mp->max_retry;
+ if (rate_control_send_low(sta, priv_sta, txrc))
return;
- }
mrr = mp->has_mrr && !txrc->rts && !txrc->bss_conf->use_cts_prot;
diff --git a/net/mac80211/rc80211_minstrel.h b/net/mac80211/rc80211_minstrel.h
index 869fe0e..38bf4168 100644
--- a/net/mac80211/rc80211_minstrel.h
+++ b/net/mac80211/rc80211_minstrel.h
@@ -33,7 +33,6 @@
/* per-rate throughput */
u32 cur_tp;
- u32 throughput;
u64 succ_hist;
u64 att_hist;
diff --git a/net/mac80211/rc80211_minstrel_debugfs.c b/net/mac80211/rc80211_minstrel_debugfs.c
index 98f4807..a715d94 100644
--- a/net/mac80211/rc80211_minstrel_debugfs.c
+++ b/net/mac80211/rc80211_minstrel_debugfs.c
@@ -83,7 +83,7 @@
p += sprintf(p, "%3u%s", mr->bitrate / 2,
(mr->bitrate & 1 ? ".5" : " "));
- tp = ((mr->cur_tp * 96) / 18000) >> 10;
+ tp = mr->cur_tp / ((18000 << 10) / 96);
prob = mr->cur_prob / 18;
eprob = mr->probability / 18;
@@ -139,7 +139,7 @@
return 0;
}
-static struct file_operations minstrel_stat_fops = {
+static const struct file_operations minstrel_stat_fops = {
.owner = THIS_MODULE,
.open = minstrel_stats_open,
.read = minstrel_stats_read,
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index a0bef76..699d3ed 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -169,19 +169,9 @@
* still a good measurement and copy it. */
if (unlikely(spinfo->tx_num_xmit == 0))
pf = spinfo->last_pf;
- else {
- /* XXX: BAD HACK!!! */
- struct sta_info *si = container_of(sta, struct sta_info, sta);
-
+ else
pf = spinfo->tx_num_failed * 100 / spinfo->tx_num_xmit;
- if (ieee80211_vif_is_mesh(&si->sdata->vif) && pf == 100)
- mesh_plink_broken(si);
- pf <<= RC_PID_ARITH_SHIFT;
- si->fail_avg = ((pf + (spinfo->last_pf << 3)) / 9)
- >> RC_PID_ARITH_SHIFT;
- }
-
spinfo->tx_num_xmit = 0;
spinfo->tx_num_failed = 0;
@@ -276,11 +266,9 @@
{
struct sk_buff *skb = txrc->skb;
struct ieee80211_supported_band *sband = txrc->sband;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct rc_pid_sta_info *spinfo = priv_sta;
int rateidx;
- u16 fc;
if (txrc->rts)
info->control.rates[0].count =
@@ -290,16 +278,8 @@
txrc->hw->conf.short_frame_max_tx_count;
/* Send management frames and NO_ACK data using lowest rate. */
- fc = le16_to_cpu(hdr->frame_control);
- if (!sta || !spinfo ||
- (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- info->flags & IEEE80211_TX_CTL_NO_ACK) {
- info->control.rates[0].idx = rate_lowest_index(sband, sta);
- if (info->flags & IEEE80211_TX_CTL_NO_ACK)
- info->control.rates[0].count = 1;
-
+ if (rate_control_send_low(sta, priv_sta, txrc))
return;
- }
rateidx = spinfo->txrate_idx;
@@ -321,7 +301,6 @@
struct rc_pid_sta_info *spinfo = priv_sta;
struct rc_pid_info *pinfo = priv;
struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
- struct sta_info *si;
int i, j, tmp;
bool s;
@@ -358,9 +337,6 @@
}
spinfo->txrate_idx = rate_lowest_index(sband, sta);
- /* HACK */
- si = container_of(sta, struct sta_info, sta);
- si->fail_avg = 0;
}
static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c
index a08a9b5..a59043fb 100644
--- a/net/mac80211/rc80211_pid_debugfs.c
+++ b/net/mac80211/rc80211_pid_debugfs.c
@@ -198,7 +198,7 @@
#undef RC_PID_PRINT_BUF_SIZE
-static struct file_operations rc_pid_fop_events = {
+static const struct file_operations rc_pid_fop_events = {
.owner = THIS_MODULE,
.read = rate_control_pid_events_read,
.poll = rate_control_pid_events_poll,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 0936fc2..c01588f 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -30,7 +30,6 @@
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
- struct ieee80211_rx_status *status,
u16 mpdu_seq_num,
int bar_req);
/*
@@ -59,11 +58,11 @@
return skb;
}
-static inline int should_drop_frame(struct ieee80211_rx_status *status,
- struct sk_buff *skb,
+static inline int should_drop_frame(struct sk_buff *skb,
int present_fcs_len,
int radiotap_len)
{
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
@@ -111,10 +110,10 @@
static void
ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
struct sk_buff *skb,
- struct ieee80211_rx_status *status,
struct ieee80211_rate *rate,
int rtap_len)
{
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_radiotap_header *rthdr;
unsigned char *pos;
@@ -220,9 +219,9 @@
*/
static struct sk_buff *
ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb,
- struct ieee80211_rx_status *status,
struct ieee80211_rate *rate)
{
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(origskb);
struct ieee80211_sub_if_data *sdata;
int needed_headroom = 0;
struct sk_buff *skb, *skb2;
@@ -248,8 +247,7 @@
present_fcs_len = FCS_LEN;
if (!local->monitors) {
- if (should_drop_frame(status, origskb, present_fcs_len,
- rtap_len)) {
+ if (should_drop_frame(origskb, present_fcs_len, rtap_len)) {
dev_kfree_skb(origskb);
return NULL;
}
@@ -257,7 +255,7 @@
return remove_monitor_info(local, origskb, rtap_len);
}
- if (should_drop_frame(status, origskb, present_fcs_len, rtap_len)) {
+ if (should_drop_frame(origskb, present_fcs_len, rtap_len)) {
/* only need to expand headroom if necessary */
skb = origskb;
origskb = NULL;
@@ -289,7 +287,7 @@
/* if necessary, prepend radiotap information */
if (!(status->flag & RX_FLAG_RADIOTAP))
- ieee80211_add_rx_radiotap_header(local, skb, status, rate,
+ ieee80211_add_rx_radiotap_header(local, skb, rate,
needed_headroom);
skb_reset_mac_header(skb);
@@ -420,13 +418,13 @@
struct ieee80211_local *local = rx->local;
struct sk_buff *skb = rx->skb;
- if (unlikely(local->hw_scanning))
- return ieee80211_scan_rx(rx->sdata, skb, rx->status);
+ if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning)))
+ return ieee80211_scan_rx(rx->sdata, skb);
- if (unlikely(local->sw_scanning)) {
+ if (unlikely(test_bit(SCAN_SW_SCANNING, &local->scanning) &&
+ (rx->flags & IEEE80211_RX_IN_SCAN))) {
/* drop all the other packets during a software scan anyway */
- if (ieee80211_scan_rx(rx->sdata, skb, rx->status)
- != RX_QUEUED)
+ if (ieee80211_scan_rx(rx->sdata, skb) != RX_QUEUED)
dev_kfree_skb(skb);
return RX_QUEUED;
}
@@ -491,12 +489,21 @@
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ char *dev_addr = rx->dev->dev_addr;
if (ieee80211_is_data(hdr->frame_control)) {
- if (!ieee80211_has_a4(hdr->frame_control))
- return RX_DROP_MONITOR;
- if (memcmp(hdr->addr4, rx->dev->dev_addr, ETH_ALEN) == 0)
- return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ if (ieee80211_has_tods(hdr->frame_control) ||
+ !ieee80211_has_fromds(hdr->frame_control))
+ return RX_DROP_MONITOR;
+ if (memcmp(hdr->addr3, dev_addr, ETH_ALEN) == 0)
+ return RX_DROP_MONITOR;
+ } else {
+ if (!ieee80211_has_a4(hdr->frame_control))
+ return RX_DROP_MONITOR;
+ if (memcmp(hdr->addr4, dev_addr, ETH_ALEN) == 0)
+ return RX_DROP_MONITOR;
+ }
}
/* If there is not an established peer link and this is not a peer link
@@ -529,7 +536,7 @@
if (ieee80211_is_data(hdr->frame_control) &&
is_multicast_ether_addr(hdr->addr1) &&
- mesh_rmc_check(hdr->addr4, msh_h_get(hdr, hdrlen), rx->sdata))
+ mesh_rmc_check(hdr->addr3, msh_h_get(hdr, hdrlen), rx->sdata))
return RX_DROP_MONITOR;
#undef msh_h_get
@@ -785,7 +792,7 @@
struct ieee80211_local *local = sdata->local;
atomic_inc(&sdata->bss->num_sta_ps);
- set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
+ set_sta_flags(sta, WLAN_STA_PS);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
@@ -801,7 +808,7 @@
atomic_dec(&sdata->bss->num_sta_ps);
- clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
+ clear_sta_flags(sta, WLAN_STA_PS);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
if (!skb_queue_empty(&sta->ps_tx_buf))
@@ -836,28 +843,22 @@
if (!sta)
return RX_CONTINUE;
- /* Update last_rx only for IBSS packets which are for the current
- * BSSID to avoid keeping the current IBSS network alive in cases where
- * other STAs are using different BSSID. */
+ /*
+ * Update last_rx only for IBSS packets which are for the current
+ * BSSID to avoid keeping the current IBSS network alive in cases
+ * where other STAs start using different BSSID.
+ */
if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) {
u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
NL80211_IFTYPE_ADHOC);
if (compare_ether_addr(bssid, rx->sdata->u.ibss.bssid) == 0)
sta->last_rx = jiffies;
- } else
- if (!is_multicast_ether_addr(hdr->addr1) ||
- rx->sdata->vif.type == NL80211_IFTYPE_STATION) {
- /* Update last_rx only for unicast frames in order to prevent
- * the Probe Request frames (the only broadcast frames from a
- * STA in infrastructure mode) from keeping a connection alive.
+ } else if (!is_multicast_ether_addr(hdr->addr1)) {
+ /*
* Mesh beacons will update last_rx when if they are found to
* match the current local configuration when processed.
*/
- if (rx->sdata->vif.type == NL80211_IFTYPE_STATION &&
- ieee80211_is_beacon(hdr->frame_control)) {
- rx->sdata->u.mgd.last_beacon = jiffies;
- } else
- sta->last_rx = jiffies;
+ sta->last_rx = jiffies;
}
if (!(rx->flags & IEEE80211_RX_RA_MATCH))
@@ -1125,14 +1126,15 @@
skb_queue_empty(&rx->sta->ps_tx_buf);
if (skb) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr =
(struct ieee80211_hdr *) skb->data;
/*
- * Tell TX path to send one frame even though the STA may
+ * Tell TX path to send this frame even though the STA may
* still remain is PS mode after this frame exchange.
*/
- set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
+ info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n",
@@ -1147,7 +1149,7 @@
else
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
- dev_queue_xmit(skb);
+ ieee80211_add_pending_skb(rx->local, skb);
if (no_pending_pkts)
sta_info_clear_tim_bit(rx->sta);
@@ -1487,10 +1489,13 @@
struct ieee80211s_hdr *mesh_hdr;
unsigned int hdrlen;
struct sk_buff *skb = rx->skb, *fwd_skb;
+ struct ieee80211_local *local = rx->local;
+ struct ieee80211_sub_if_data *sdata;
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+ sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
if (!ieee80211_is_data(hdr->frame_control))
return RX_CONTINUE;
@@ -1499,11 +1504,10 @@
/* illegal frame */
return RX_DROP_MONITOR;
- if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6){
- struct ieee80211_sub_if_data *sdata;
+ if (!is_multicast_ether_addr(hdr->addr1) &&
+ (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6)) {
struct mesh_path *mppath;
- sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
rcu_read_lock();
mppath = mpp_path_lookup(mesh_hdr->eaddr2, sdata);
if (!mppath) {
@@ -1518,7 +1522,9 @@
rcu_read_unlock();
}
- if (compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
+ /* Frame has reached destination. Don't forward */
+ if (!is_multicast_ether_addr(hdr->addr1) &&
+ compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
return RX_CONTINUE;
mesh_hdr->ttl--;
@@ -1529,6 +1535,8 @@
dropped_frames_ttl);
else {
struct ieee80211_hdr *fwd_hdr;
+ struct ieee80211_tx_info *info;
+
fwd_skb = skb_copy(skb, GFP_ATOMIC);
if (!fwd_skb && net_ratelimit())
@@ -1536,19 +1544,40 @@
rx->dev->name);
fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data;
- /*
- * Save TA to addr1 to send TA a path error if a
- * suitable next hop is not found
- */
- memcpy(fwd_hdr->addr1, fwd_hdr->addr2, ETH_ALEN);
memcpy(fwd_hdr->addr2, rx->dev->dev_addr, ETH_ALEN);
- fwd_skb->dev = rx->local->mdev;
- fwd_skb->iif = rx->dev->ifindex;
- dev_queue_xmit(fwd_skb);
+ info = IEEE80211_SKB_CB(fwd_skb);
+ memset(info, 0, sizeof(*info));
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
+ info->control.vif = &rx->sdata->vif;
+ ieee80211_select_queue(local, fwd_skb);
+ if (is_multicast_ether_addr(fwd_hdr->addr1))
+ IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
+ fwded_mcast);
+ else {
+ int err;
+ /*
+ * Save TA to addr1 to send TA a path error if a
+ * suitable next hop is not found
+ */
+ memcpy(fwd_hdr->addr1, fwd_hdr->addr2,
+ ETH_ALEN);
+ err = mesh_nexthop_lookup(fwd_skb, sdata);
+ /* Failed to immediately resolve next hop:
+ * fwded frame was dropped or will be added
+ * later to the pending skb queue. */
+ if (err)
+ return RX_DROP_MONITOR;
+
+ IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
+ fwded_unicast);
+ }
+ IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
+ fwded_frames);
+ ieee80211_add_pending_skb(local, fwd_skb);
}
}
- if (is_multicast_ether_addr(hdr->addr3) ||
+ if (is_multicast_ether_addr(hdr->addr1) ||
rx->dev->flags & IFF_PROMISC)
return RX_CONTINUE;
else
@@ -1620,7 +1649,7 @@
/* manage reordering buffer according to requested */
/* sequence number */
rcu_read_lock();
- ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL,
+ ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL,
start_seq_num, 1);
rcu_read_unlock();
return RX_DROP_UNUSABLE;
@@ -1644,12 +1673,7 @@
if (compare_ether_addr(mgmt->sa, sdata->u.mgd.bssid) != 0 ||
compare_ether_addr(mgmt->bssid, sdata->u.mgd.bssid) != 0) {
- /* Not from the current AP. */
- return;
- }
-
- if (sdata->u.mgd.state == IEEE80211_STA_MLME_ASSOCIATE) {
- /* Association in progress; ignore SA Query */
+ /* Not from the current AP or not associated yet. */
return;
}
@@ -1686,7 +1710,6 @@
struct ieee80211_local *local = rx->local;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
- struct ieee80211_bss *bss;
int len = rx->skb->len;
if (!ieee80211_is_action(mgmt->frame_control))
@@ -1764,17 +1787,7 @@
if (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN))
return RX_DROP_MONITOR;
- bss = ieee80211_rx_bss_get(local, sdata->u.mgd.bssid,
- local->hw.conf.channel->center_freq,
- sdata->u.mgd.ssid,
- sdata->u.mgd.ssid_len);
- if (!bss)
- return RX_DROP_MONITOR;
-
- ieee80211_sta_process_chanswitch(sdata,
- &mgmt->u.action.u.chan_switch.sw_elem, bss);
- ieee80211_rx_bss_put(local, bss);
- break;
+ return ieee80211_sta_rx_mgmt(sdata, rx->skb);
}
break;
case WLAN_CATEGORY_SA_QUERY:
@@ -1817,19 +1830,18 @@
return RX_DROP_MONITOR;
if (ieee80211_vif_is_mesh(&sdata->vif))
- return ieee80211_mesh_rx_mgmt(sdata, rx->skb, rx->status);
+ return ieee80211_mesh_rx_mgmt(sdata, rx->skb);
if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return ieee80211_ibss_rx_mgmt(sdata, rx->skb, rx->status);
+ return ieee80211_ibss_rx_mgmt(sdata, rx->skb);
if (sdata->vif.type == NL80211_IFTYPE_STATION)
- return ieee80211_sta_rx_mgmt(sdata, rx->skb, rx->status);
+ return ieee80211_sta_rx_mgmt(sdata, rx->skb);
return RX_DROP_MONITOR;
}
-static void ieee80211_rx_michael_mic_report(struct net_device *dev,
- struct ieee80211_hdr *hdr,
+static void ieee80211_rx_michael_mic_report(struct ieee80211_hdr *hdr,
struct ieee80211_rx_data *rx)
{
int keyidx;
@@ -1866,7 +1878,8 @@
!ieee80211_is_auth(hdr->frame_control))
goto ignore;
- mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL);
+ mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL,
+ GFP_ATOMIC);
ignore:
dev_kfree_skb(rx->skb);
rx->skb = NULL;
@@ -2028,13 +2041,8 @@
case NL80211_IFTYPE_STATION:
if (!bssid)
return 0;
- if (!ieee80211_bssid_match(bssid, sdata->u.mgd.bssid)) {
- if (!(rx->flags & IEEE80211_RX_IN_SCAN))
- return 0;
- rx->flags &= ~IEEE80211_RX_RA_MATCH;
- } else if (!multicast &&
- compare_ether_addr(sdata->dev->dev_addr,
- hdr->addr1) != 0) {
+ if (!multicast &&
+ compare_ether_addr(sdata->dev->dev_addr, hdr->addr1) != 0) {
if (!(sdata->dev->flags & IFF_PROMISC))
return 0;
rx->flags &= ~IEEE80211_RX_RA_MATCH;
@@ -2114,9 +2122,9 @@
*/
static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
struct sk_buff *skb,
- struct ieee80211_rx_status *status,
struct ieee80211_rate *rate)
{
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hdr *hdr;
@@ -2143,11 +2151,12 @@
}
if ((status->flag & RX_FLAG_MMIC_ERROR)) {
- ieee80211_rx_michael_mic_report(local->mdev, hdr, &rx);
+ ieee80211_rx_michael_mic_report(hdr, &rx);
return;
}
- if (unlikely(local->sw_scanning || local->hw_scanning))
+ if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
+ test_bit(SCAN_OFF_CHANNEL, &local->scanning)))
rx.flags |= IEEE80211_RX_IN_SCAN;
ieee80211_parse_qos(&rx);
@@ -2227,20 +2236,21 @@
{
struct ieee80211_supported_band *sband;
struct ieee80211_rate *rate;
- struct ieee80211_rx_status status;
+ struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
+ struct ieee80211_rx_status *status;
- if (!tid_agg_rx->reorder_buf[index])
+ if (!skb)
goto no_frame;
+ status = IEEE80211_SKB_RXCB(skb);
+
/* release the reordered frames to stack */
- memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, sizeof(status));
- sband = hw->wiphy->bands[status.band];
- if (status.flag & RX_FLAG_HT)
+ sband = hw->wiphy->bands[status->band];
+ if (status->flag & RX_FLAG_HT)
rate = sband->bitrates; /* TODO: HT rates */
else
- rate = &sband->bitrates[status.rate_idx];
- __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
- &status, rate);
+ rate = &sband->bitrates[status->rate_idx];
+ __ieee80211_rx_handle_packet(hw, skb, rate);
tid_agg_rx->stored_mpdu_num--;
tid_agg_rx->reorder_buf[index] = NULL;
@@ -2265,7 +2275,6 @@
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
- struct ieee80211_rx_status *rxstatus,
u16 mpdu_seq_num,
int bar_req)
{
@@ -2324,8 +2333,6 @@
/* put the frame in the reordering buffer */
tid_agg_rx->reorder_buf[index] = skb;
tid_agg_rx->reorder_time[index] = jiffies;
- memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
- sizeof(*rxstatus));
tid_agg_rx->stored_mpdu_num++;
/* release the buffer until next missing frame */
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
@@ -2374,8 +2381,7 @@
}
static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
- struct sk_buff *skb,
- struct ieee80211_rx_status *status)
+ struct sk_buff *skb)
{
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
@@ -2424,7 +2430,7 @@
/* according to mpdu sequence number deal with reordering buffer */
mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
- ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status,
+ ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb,
mpdu_seq_num, 0);
end_reorder:
return ret;
@@ -2434,24 +2440,20 @@
* This is the receive path handler. It is called by a low level driver when an
* 802.11 MPDU is received from the hardware.
*/
-void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_rx_status *status)
+void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_rate *rate = NULL;
struct ieee80211_supported_band *sband;
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
- if (status->band < 0 ||
- status->band >= IEEE80211_NUM_BANDS) {
- WARN_ON(1);
- return;
- }
+ if (WARN_ON(status->band < 0 ||
+ status->band >= IEEE80211_NUM_BANDS))
+ goto drop;
sband = local->hw.wiphy->bands[status->band];
- if (!sband) {
- WARN_ON(1);
- return;
- }
+ if (WARN_ON(!sband))
+ goto drop;
/*
* If we're suspending, it is possible although not too likely
@@ -2460,16 +2462,21 @@
* that might, for example, cause stations to be added or other
* driver callbacks be invoked.
*/
- if (unlikely(local->quiescing || local->suspended)) {
- kfree_skb(skb);
- return;
- }
+ if (unlikely(local->quiescing || local->suspended))
+ goto drop;
+
+ /*
+ * The same happens when we're not even started,
+ * but that's worth a warning.
+ */
+ if (WARN_ON(!local->started))
+ goto drop;
if (status->flag & RX_FLAG_HT) {
/* rate_idx is MCS index */
if (WARN_ON(status->rate_idx < 0 ||
status->rate_idx >= 76))
- return;
+ goto drop;
/* HT rates are not in the table - use the highest legacy rate
* for now since other parts of mac80211 may not yet be fully
* MCS aware. */
@@ -2477,7 +2484,7 @@
} else {
if (WARN_ON(status->rate_idx < 0 ||
status->rate_idx >= sband->n_bitrates))
- return;
+ goto drop;
rate = &sband->bitrates[status->rate_idx];
}
@@ -2494,7 +2501,7 @@
* if it was previously present.
* Also, frames with less than 16 bytes are dropped.
*/
- skb = ieee80211_rx_monitor(local, skb, status, rate);
+ skb = ieee80211_rx_monitor(local, skb, rate);
if (!skb) {
rcu_read_unlock();
return;
@@ -2512,25 +2519,25 @@
* frames from other than operational channel), but that should not
* happen in normal networks.
*/
- if (!ieee80211_rx_reorder_ampdu(local, skb, status))
- __ieee80211_rx_handle_packet(hw, skb, status, rate);
+ if (!ieee80211_rx_reorder_ampdu(local, skb))
+ __ieee80211_rx_handle_packet(hw, skb, rate);
rcu_read_unlock();
+
+ return;
+ drop:
+ kfree_skb(skb);
}
-EXPORT_SYMBOL(__ieee80211_rx);
+EXPORT_SYMBOL(ieee80211_rx);
/* This is a version of the rx handler that can be called from hard irq
* context. Post the skb on the queue and schedule the tasklet */
-void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_rx_status *status)
+void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
BUILD_BUG_ON(sizeof(struct ieee80211_rx_status) > sizeof(skb->cb));
- skb->dev = local->mdev;
- /* copy status into skb->cb for use by tasklet */
- memcpy(skb->cb, status, sizeof(*status));
skb->pkt_type = IEEE80211_RX_MSG;
skb_queue_tail(&local->skb_queue, skb);
tasklet_schedule(&local->tasklet);
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 2a8d09a..0399011 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -18,7 +18,6 @@
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
-#include <net/iw_handler.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
@@ -26,7 +25,7 @@
#define IEEE80211_PROBE_DELAY (HZ / 33)
#define IEEE80211_CHANNEL_TIME (HZ / 33)
-#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 5)
+#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8)
struct ieee80211_bss *
ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
@@ -121,23 +120,10 @@
return bss;
}
-void ieee80211_rx_bss_remove(struct ieee80211_sub_if_data *sdata, u8 *bssid,
- int freq, u8 *ssid, u8 ssid_len)
-{
- struct ieee80211_bss *bss;
- struct ieee80211_local *local = sdata->local;
-
- bss = ieee80211_rx_bss_get(local, bssid, freq, ssid, ssid_len);
- if (bss) {
- cfg80211_unlink_bss(local->hw.wiphy, (void *)bss);
- ieee80211_rx_bss_put(local, bss);
- }
-}
-
ieee80211_rx_result
-ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status)
+ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
{
+ struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_mgmt *mgmt;
struct ieee80211_bss *bss;
u8 *elements;
@@ -278,7 +264,7 @@
mutex_lock(&local->scan_mtx);
- if (WARN_ON(!local->hw_scanning && !local->sw_scanning)) {
+ if (WARN_ON(!local->scanning)) {
mutex_unlock(&local->scan_mtx);
return;
}
@@ -288,16 +274,16 @@
return;
}
- if (local->hw_scanning)
+ if (test_bit(SCAN_HW_SCANNING, &local->scanning))
ieee80211_restore_scan_ies(local);
- if (local->scan_req != &local->int_scan_req)
+ if (local->scan_req != local->int_scan_req)
cfg80211_scan_done(local->scan_req, aborted);
local->scan_req = NULL;
+ local->scan_sdata = NULL;
- was_hw_scan = local->hw_scanning;
- local->hw_scanning = false;
- local->sw_scanning = false;
+ was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
+ local->scanning = 0;
local->scan_channel = NULL;
/* we only have to protect scan_req and hw/sw scan */
@@ -307,16 +293,7 @@
if (was_hw_scan)
goto done;
- netif_tx_lock_bh(local->mdev);
- netif_addr_lock(local->mdev);
- local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC;
- drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
-
- netif_addr_unlock(local->mdev);
- netif_tx_unlock_bh(local->mdev);
+ ieee80211_configure_filter(local);
drv_sw_scan_complete(local);
@@ -327,7 +304,7 @@
/* Tell AP we're back */
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
+ if (sdata->u.mgd.associated) {
ieee80211_scan_ps_disable(sdata);
netif_tx_wake_all_queues(sdata->dev);
}
@@ -382,30 +359,24 @@
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
- netif_tx_stop_all_queues(sdata->dev);
- ieee80211_scan_ps_enable(sdata);
- }
- } else
+ /*
+ * only handle non-STA interfaces here, STA interfaces
+ * are handled in the scan state machine
+ */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
netif_tx_stop_all_queues(sdata->dev);
}
mutex_unlock(&local->iflist_mtx);
- local->scan_state = SCAN_SET_CHANNEL;
+ local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
- netif_addr_lock_bh(local->mdev);
- local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
- drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
- netif_addr_unlock_bh(local->mdev);
+ ieee80211_configure_filter(local);
/* TODO: start scan as soon as all nullfunc frames are ACKed */
- queue_delayed_work(local->hw.workqueue, &local->scan_work,
- IEEE80211_CHANNEL_TIME);
+ ieee80211_queue_delayed_work(&local->hw,
+ &local->scan_work,
+ IEEE80211_CHANNEL_TIME);
return 0;
}
@@ -441,20 +412,18 @@
local->scan_req = req;
local->scan_sdata = sdata;
- if (req != &local->int_scan_req &&
+ if (req != local->int_scan_req &&
sdata->vif.type == NL80211_IFTYPE_STATION &&
- (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE ||
- ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE ||
- ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE)) {
- /* actually wait for the assoc to finish/time out */
+ !list_empty(&ifmgd->work_list)) {
+ /* actually wait for the work it's doing to finish/time out */
set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
return 0;
}
if (local->ops->hw_scan)
- local->hw_scanning = true;
+ __set_bit(SCAN_HW_SCANNING, &local->scanning);
else
- local->sw_scanning = true;
+ __set_bit(SCAN_SW_SCANNING, &local->scanning);
/*
* Kicking off the scan need not be protected,
* only the scan variable stuff, since now
@@ -477,11 +446,9 @@
mutex_lock(&local->scan_mtx);
if (rc) {
- if (local->ops->hw_scan) {
- local->hw_scanning = false;
+ if (local->ops->hw_scan)
ieee80211_restore_scan_ies(local);
- } else
- local->sw_scanning = false;
+ local->scanning = 0;
ieee80211_recalc_idle(local);
@@ -492,13 +459,195 @@
return rc;
}
+static int ieee80211_scan_state_decision(struct ieee80211_local *local,
+ unsigned long *next_delay)
+{
+ bool associated = false;
+ struct ieee80211_sub_if_data *sdata;
+
+ /* if no more bands/channels left, complete scan and advance to the idle state */
+ if (local->scan_channel_idx >= local->scan_req->n_channels) {
+ ieee80211_scan_completed(&local->hw, false);
+ return 1;
+ }
+
+ /* check if at least one STA interface is associated */
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->u.mgd.associated) {
+ associated = true;
+ break;
+ }
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+
+ if (local->scan_channel) {
+ /*
+ * we're currently scanning a different channel, let's
+ * switch back to the operating channel now if at least
+ * one interface is associated. Otherwise just scan the
+ * next channel
+ */
+ if (associated)
+ local->next_scan_state = SCAN_ENTER_OPER_CHANNEL;
+ else
+ local->next_scan_state = SCAN_SET_CHANNEL;
+ } else {
+ /*
+ * we're on the operating channel currently, let's
+ * leave that channel now to scan another one
+ */
+ local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
+ }
+
+ *next_delay = 0;
+ return 0;
+}
+
+static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
+ unsigned long *next_delay)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ /*
+ * notify the AP about us leaving the channel and stop all STA interfaces
+ */
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ netif_tx_stop_all_queues(sdata->dev);
+ if (sdata->u.mgd.associated)
+ ieee80211_scan_ps_enable(sdata);
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+
+ __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
+
+ /* advance to the next channel to be scanned */
+ *next_delay = HZ / 10;
+ local->next_scan_state = SCAN_SET_CHANNEL;
+}
+
+static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *local,
+ unsigned long *next_delay)
+{
+ struct ieee80211_sub_if_data *sdata = local->scan_sdata;
+
+ /* switch back to the operating channel */
+ local->scan_channel = NULL;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+
+ /*
+ * notify the AP about us being back and restart all STA interfaces
+ */
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+
+ /* Tell AP we're back */
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->u.mgd.associated)
+ ieee80211_scan_ps_disable(sdata);
+ netif_tx_wake_all_queues(sdata->dev);
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+
+ __clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
+
+ *next_delay = HZ / 5;
+ local->next_scan_state = SCAN_DECISION;
+}
+
+static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
+ unsigned long *next_delay)
+{
+ int skip;
+ struct ieee80211_channel *chan;
+ struct ieee80211_sub_if_data *sdata = local->scan_sdata;
+
+ skip = 0;
+ chan = local->scan_req->channels[local->scan_channel_idx];
+
+ if (chan->flags & IEEE80211_CHAN_DISABLED ||
+ (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+ chan->flags & IEEE80211_CHAN_NO_IBSS))
+ skip = 1;
+
+ if (!skip) {
+ local->scan_channel = chan;
+ if (ieee80211_hw_config(local,
+ IEEE80211_CONF_CHANGE_CHANNEL))
+ skip = 1;
+ }
+
+ /* advance state machine to next channel/band */
+ local->scan_channel_idx++;
+
+ if (skip) {
+ /* if we skip this channel return to the decision state */
+ local->next_scan_state = SCAN_DECISION;
+ return;
+ }
+
+ /*
+ * Probe delay is used to update the NAV, cf. 11.1.3.2.2
+ * (which unfortunately doesn't say _why_ step a) is done,
+ * but it waits for the probe delay or until a frame is
+ * received - and the received frame would update the NAV).
+ * For now, we do not support waiting until a frame is
+ * received.
+ *
+ * In any case, it is not necessary for a passive scan.
+ */
+ if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
+ !local->scan_req->n_ssids) {
+ *next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+ local->next_scan_state = SCAN_DECISION;
+ return;
+ }
+
+ /* active scan, send probes */
+ *next_delay = IEEE80211_PROBE_DELAY;
+ local->next_scan_state = SCAN_SEND_PROBE;
+}
+
+static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
+ unsigned long *next_delay)
+{
+ int i;
+ struct ieee80211_sub_if_data *sdata = local->scan_sdata;
+
+ for (i = 0; i < local->scan_req->n_ssids; i++)
+ ieee80211_send_probe_req(
+ sdata, NULL,
+ local->scan_req->ssids[i].ssid,
+ local->scan_req->ssids[i].ssid_len,
+ local->scan_req->ie, local->scan_req->ie_len);
+
+ /*
+ * After sending probe requests, wait for probe responses
+ * on the channel.
+ */
+ *next_delay = IEEE80211_CHANNEL_TIME;
+ local->next_scan_state = SCAN_DECISION;
+}
+
void ieee80211_scan_work(struct work_struct *work)
{
struct ieee80211_local *local =
container_of(work, struct ieee80211_local, scan_work.work);
struct ieee80211_sub_if_data *sdata = local->scan_sdata;
- struct ieee80211_channel *chan;
- int skip, i;
unsigned long next_delay = 0;
mutex_lock(&local->scan_mtx);
@@ -507,11 +656,12 @@
return;
}
- if (local->scan_req && !(local->sw_scanning || local->hw_scanning)) {
+ if (local->scan_req && !local->scanning) {
struct cfg80211_scan_request *req = local->scan_req;
int rc;
local->scan_req = NULL;
+ local->scan_sdata = NULL;
rc = __ieee80211_start_scan(sdata, req);
mutex_unlock(&local->scan_mtx);
@@ -531,72 +681,32 @@
return;
}
- switch (local->scan_state) {
- case SCAN_SET_CHANNEL:
- /* if no more bands/channels left, complete scan */
- if (local->scan_channel_idx >= local->scan_req->n_channels) {
- ieee80211_scan_completed(&local->hw, false);
- return;
- }
- skip = 0;
- chan = local->scan_req->channels[local->scan_channel_idx];
-
- if (chan->flags & IEEE80211_CHAN_DISABLED ||
- (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
- chan->flags & IEEE80211_CHAN_NO_IBSS))
- skip = 1;
-
- if (!skip) {
- local->scan_channel = chan;
- if (ieee80211_hw_config(local,
- IEEE80211_CONF_CHANGE_CHANNEL))
- skip = 1;
- }
-
- /* advance state machine to next channel/band */
- local->scan_channel_idx++;
-
- if (skip)
+ /*
+ * as long as no delay is required advance immediately
+ * without scheduling a new work
+ */
+ do {
+ switch (local->next_scan_state) {
+ case SCAN_DECISION:
+ if (ieee80211_scan_state_decision(local, &next_delay))
+ return;
break;
-
- /*
- * Probe delay is used to update the NAV, cf. 11.1.3.2.2
- * (which unfortunately doesn't say _why_ step a) is done,
- * but it waits for the probe delay or until a frame is
- * received - and the received frame would update the NAV).
- * For now, we do not support waiting until a frame is
- * received.
- *
- * In any case, it is not necessary for a passive scan.
- */
- if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
- !local->scan_req->n_ssids) {
- next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+ case SCAN_SET_CHANNEL:
+ ieee80211_scan_state_set_channel(local, &next_delay);
+ break;
+ case SCAN_SEND_PROBE:
+ ieee80211_scan_state_send_probe(local, &next_delay);
+ break;
+ case SCAN_LEAVE_OPER_CHANNEL:
+ ieee80211_scan_state_leave_oper_channel(local, &next_delay);
+ break;
+ case SCAN_ENTER_OPER_CHANNEL:
+ ieee80211_scan_state_enter_oper_channel(local, &next_delay);
break;
}
+ } while (next_delay == 0);
- next_delay = IEEE80211_PROBE_DELAY;
- local->scan_state = SCAN_SEND_PROBE;
- break;
- case SCAN_SEND_PROBE:
- for (i = 0; i < local->scan_req->n_ssids; i++)
- ieee80211_send_probe_req(
- sdata, NULL,
- local->scan_req->ssids[i].ssid,
- local->scan_req->ssids[i].ssid_len,
- local->scan_req->ie, local->scan_req->ie_len);
-
- /*
- * After sending probe requests, wait for probe responses
- * on the channel.
- */
- next_delay = IEEE80211_CHANNEL_TIME;
- local->scan_state = SCAN_SET_CHANNEL;
- break;
- }
-
- queue_delayed_work(local->hw.workqueue, &local->scan_work,
- next_delay);
+ ieee80211_queue_delayed_work(&local->hw, &local->scan_work, next_delay);
}
int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
@@ -623,10 +733,10 @@
if (local->scan_req)
goto unlock;
- memcpy(local->int_scan_req.ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
- local->int_scan_req.ssids[0].ssid_len = ssid_len;
+ memcpy(local->int_scan_req->ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
+ local->int_scan_req->ssids[0].ssid_len = ssid_len;
- ret = __ieee80211_start_scan(sdata, &sdata->local->int_scan_req);
+ ret = __ieee80211_start_scan(sdata, sdata->local->int_scan_req);
unlock:
mutex_unlock(&local->scan_mtx);
return ret;
@@ -634,7 +744,7 @@
void ieee80211_scan_cancel(struct ieee80211_local *local)
{
- bool swscan;
+ bool abortscan;
cancel_delayed_work_sync(&local->scan_work);
@@ -643,9 +753,10 @@
* queued -- mostly at suspend under RTNL.
*/
mutex_lock(&local->scan_mtx);
- swscan = local->sw_scanning;
+ abortscan = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
+ (!local->scanning && local->scan_req);
mutex_unlock(&local->scan_mtx);
- if (swscan)
+ if (abortscan)
ieee80211_scan_completed(&local->hw, true);
}
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index a360bce..eec0014 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -349,6 +349,7 @@
goto out_free;
}
list_add(&sta->list, &local->sta_list);
+ local->sta_generation++;
local->num_sta++;
sta_info_hash_add(local, sta);
@@ -485,6 +486,7 @@
}
local->num_sta--;
+ local->sta_generation++;
if (local->ops->sta_notify) {
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 49a1a1f..ccc3adf 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -30,7 +30,6 @@
* @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
* @WLAN_STA_WME: Station is a QoS-STA.
* @WLAN_STA_WDS: Station is one of our WDS peers.
- * @WLAN_STA_PSPOLL: Station has just PS-polled us.
* @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
* IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
* frame to this station is transmitted.
@@ -47,7 +46,6 @@
WLAN_STA_ASSOC_AP = 1<<5,
WLAN_STA_WME = 1<<6,
WLAN_STA_WDS = 1<<7,
- WLAN_STA_PSPOLL = 1<<8,
WLAN_STA_CLEAR_PS_FILT = 1<<9,
WLAN_STA_MFP = 1<<10,
WLAN_STA_SUSPEND = 1<<11
@@ -308,6 +306,23 @@
struct dentry *inactive_ms;
struct dentry *last_seq_ctrl;
struct dentry *agg_status;
+ struct dentry *aid;
+ struct dentry *dev;
+ struct dentry *rx_packets;
+ struct dentry *tx_packets;
+ struct dentry *rx_bytes;
+ struct dentry *tx_bytes;
+ struct dentry *rx_duplicates;
+ struct dentry *rx_fragments;
+ struct dentry *rx_dropped;
+ struct dentry *tx_fragments;
+ struct dentry *tx_filtered;
+ struct dentry *tx_retry_failed;
+ struct dentry *tx_retry_count;
+ struct dentry *last_signal;
+ struct dentry *last_qual;
+ struct dentry *last_noise;
+ struct dentry *wep_weak_iv_count;
bool add_has_run;
} debugfs;
#endif
@@ -342,17 +357,6 @@
spin_unlock_irqrestore(&sta->flaglock, irqfl);
}
-static inline void set_and_clear_sta_flags(struct sta_info *sta,
- const u32 set, const u32 clear)
-{
- unsigned long irqfl;
-
- spin_lock_irqsave(&sta->flaglock, irqfl);
- sta->flags |= set;
- sta->flags &= ~clear;
- spin_unlock_irqrestore(&sta->flaglock, irqfl);
-}
-
static inline u32 test_sta_flags(struct sta_info *sta, const u32 flags)
{
u32 ret;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 3a8922c..5143d20 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -192,7 +192,7 @@
if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED))
return TX_CONTINUE;
- if (unlikely(tx->local->sw_scanning) &&
+ if (unlikely(test_bit(SCAN_OFF_CHANNEL, &tx->local->scanning)) &&
!ieee80211_is_probe_req(hdr->frame_control) &&
!ieee80211_is_nullfunc(hdr->frame_control))
/*
@@ -317,30 +317,30 @@
if (!atomic_read(&tx->sdata->bss->num_sta_ps))
return TX_CONTINUE;
- /* buffered in mac80211 */
- if (tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) {
- if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
- purge_old_ps_buffers(tx->local);
- if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
- AP_MAX_BC_BUFFER) {
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: BC TX buffer full - "
- "dropping the oldest frame\n",
- tx->dev->name);
- }
-#endif
- dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf));
- } else
- tx->local->total_ps_buffered++;
- skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb);
- return TX_QUEUED;
+ /* buffered in hardware */
+ if (!(tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING)) {
+ info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
+
+ return TX_CONTINUE;
}
- /* buffered in hardware */
- info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
+ /* buffered in mac80211 */
+ if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
+ purge_old_ps_buffers(tx->local);
- return TX_CONTINUE;
+ if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= AP_MAX_BC_BUFFER) {
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: BC TX buffer full - dropping the oldest frame\n",
+ tx->dev->name);
+#endif
+ dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf));
+ } else
+ tx->local->total_ps_buffered++;
+
+ skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb);
+
+ return TX_QUEUED;
}
static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta,
@@ -373,7 +373,7 @@
staflags = get_sta_flags(sta);
if (unlikely((staflags & WLAN_STA_PS) &&
- !(staflags & WLAN_STA_PSPOLL))) {
+ !(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE))) {
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %pM aid %d: PS buffer (entries "
"before %d)\n",
@@ -400,6 +400,7 @@
sta_info_set_tim_bit(sta);
info->control.jiffies = jiffies;
+ info->control.vif = &tx->sdata->vif;
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
skb_queue_tail(&sta->ps_tx_buf, tx->skb);
return TX_QUEUED;
@@ -411,24 +412,7 @@
sta->sta.addr);
}
#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
- if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) {
- /*
- * The sleeping station with pending data is now snoozing.
- * It queried us for its buffered frames and will go back
- * to deep sleep once it got everything.
- *
- * inform the driver, in case the hardware does powersave
- * frame filtering and keeps a station blacklist on its own
- * (e.g: p54), so that frames can be delivered unimpeded.
- *
- * Note: It should be safe to disable the filter now.
- * As, it is really unlikely that we still have any pending
- * frame for this station in the hw's buffers/fifos left,
- * that is not rejected with a unsuccessful tx_status yet.
- */
- info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
- }
return TX_CONTINUE;
}
@@ -451,7 +435,7 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
- if (unlikely(tx->skb->do_not_encrypt))
+ if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT))
tx->key = NULL;
else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
tx->key = key;
@@ -497,7 +481,7 @@
}
if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
- tx->skb->do_not_encrypt = 1;
+ info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
return TX_CONTINUE;
}
@@ -512,6 +496,7 @@
int i, len;
bool inval = false, rts = false, short_preamble = false;
struct ieee80211_tx_rate_control txrc;
+ u32 sta_flags;
memset(&txrc, 0, sizeof(txrc));
@@ -544,7 +529,26 @@
(tx->sta && test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))))
txrc.short_preamble = short_preamble = true;
+ sta_flags = tx->sta ? get_sta_flags(tx->sta) : 0;
+ /*
+ * Lets not bother rate control if we're associated and cannot
+ * talk to the sta. This should not happen.
+ */
+ if (WARN(test_bit(SCAN_SW_SCANNING, &tx->local->scanning) &&
+ (sta_flags & WLAN_STA_ASSOC) &&
+ !rate_usable_index_exists(sband, &tx->sta->sta),
+ "%s: Dropped data frame as no usable bitrate found while "
+ "scanning and associated. Target station: "
+ "%pM on %d GHz band\n",
+ tx->dev->name, hdr->addr1,
+ tx->channel->band ? 5 : 2))
+ return TX_DROP;
+
+ /*
+ * If we're associated with the sta at this point we know we can at
+ * least send the frame at the lowest bit rate.
+ */
rate_control_get_rate(tx->sdata, tx->sta, &txrc);
if (unlikely(info->control.rates[0].idx < 0))
@@ -676,7 +680,7 @@
* number, if we have no matching interface then we
* neither assign one ourselves nor ask the driver to.
*/
- if (unlikely(!info->control.vif))
+ if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR))
return TX_CONTINUE;
if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
@@ -696,7 +700,6 @@
/* for pure STA mode without beacons, we can do it */
hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number);
tx->sdata->sequence_number += 0x10;
- tx->sdata->sequence_number &= IEEE80211_SCTL_SEQ;
return TX_CONTINUE;
}
@@ -754,9 +757,7 @@
memcpy(tmp->cb, skb->cb, sizeof(tmp->cb));
skb_copy_queue_mapping(tmp, skb);
tmp->priority = skb->priority;
- tmp->do_not_encrypt = skb->do_not_encrypt;
tmp->dev = skb->dev;
- tmp->iif = skb->iif;
/* copy header and data */
memcpy(skb_put(tmp, hdrlen), skb->data, hdrlen);
@@ -784,7 +785,7 @@
/*
* Warn when submitting a fragmented A-MPDU frame and drop it.
- * This scenario is handled in __ieee80211_tx_prepare but extra
+ * This scenario is handled in ieee80211_tx_prepare but extra
* caution taken here as fragmented ampdu may cause Tx stop.
*/
if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU))
@@ -842,6 +843,23 @@
}
static ieee80211_tx_result debug_noinline
+ieee80211_tx_h_stats(struct ieee80211_tx_data *tx)
+{
+ struct sk_buff *skb = tx->skb;
+
+ if (!tx->sta)
+ return TX_CONTINUE;
+
+ tx->sta->tx_packets++;
+ do {
+ tx->sta->tx_fragments++;
+ tx->sta->tx_bytes += skb->len;
+ } while ((skb = skb->next));
+
+ return TX_CONTINUE;
+}
+
+static ieee80211_tx_result debug_noinline
ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx)
{
if (!tx->key)
@@ -885,23 +903,6 @@
return TX_CONTINUE;
}
-static ieee80211_tx_result debug_noinline
-ieee80211_tx_h_stats(struct ieee80211_tx_data *tx)
-{
- struct sk_buff *skb = tx->skb;
-
- if (!tx->sta)
- return TX_CONTINUE;
-
- tx->sta->tx_packets++;
- do {
- tx->sta->tx_fragments++;
- tx->sta->tx_bytes += skb->len;
- } while ((skb = skb->next));
-
- return TX_CONTINUE;
-}
-
/* actual transmit path */
/*
@@ -923,11 +924,12 @@
struct ieee80211_radiotap_header *rthdr =
(struct ieee80211_radiotap_header *) skb->data;
struct ieee80211_supported_band *sband;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len);
sband = tx->local->hw.wiphy->bands[tx->channel->band];
- skb->do_not_encrypt = 1;
+ info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
tx->flags &= ~IEEE80211_TX_FRAGMENTED;
/*
@@ -965,7 +967,7 @@
skb_trim(skb, skb->len - FCS_LEN);
}
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
- tx->skb->do_not_encrypt = 0;
+ info->flags &= ~IEEE80211_TX_INTFL_DONT_ENCRYPT;
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
tx->flags |= IEEE80211_TX_FRAGMENTED;
break;
@@ -998,13 +1000,12 @@
* initialises @tx
*/
static ieee80211_tx_result
-__ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
- struct sk_buff *skb,
- struct net_device *dev)
+ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_tx_data *tx,
+ struct sk_buff *skb)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_hdr *hdr;
- struct ieee80211_sub_if_data *sdata;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int hdrlen, tid;
u8 *qc, *state;
@@ -1012,9 +1013,9 @@
memset(tx, 0, sizeof(*tx));
tx->skb = skb;
- tx->dev = dev; /* use original interface */
+ tx->dev = sdata->dev; /* use original interface */
tx->local = local;
- tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ tx->sdata = sdata;
tx->channel = local->hw.conf.channel;
/*
* Set this flag (used below to indicate "automatic fragmentation"),
@@ -1023,7 +1024,6 @@
tx->flags |= IEEE80211_TX_FRAGMENTED;
/* process and remove the injection radiotap header */
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) {
if (!__ieee80211_parse_tx_radiotap(tx, skb))
return TX_DROP;
@@ -1075,6 +1075,7 @@
} else if (*state != HT_AGG_STATE_IDLE) {
/* in progress */
queued = true;
+ info->control.vif = &sdata->vif;
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
__skb_queue_tail(&tid_tx->pending, skb);
}
@@ -1119,50 +1120,29 @@
return TX_CONTINUE;
}
-/*
- * NB: @tx is uninitialised when passed in here
- */
-static int ieee80211_tx_prepare(struct ieee80211_local *local,
- struct ieee80211_tx_data *tx,
- struct sk_buff *skb)
-{
- struct net_device *dev;
-
- dev = dev_get_by_index(&init_net, skb->iif);
- if (unlikely(dev && !is_ieee80211_device(local, dev))) {
- dev_put(dev);
- dev = NULL;
- }
- if (unlikely(!dev))
- return -ENODEV;
- /*
- * initialises tx with control
- *
- * return value is safe to ignore here because this function
- * can only be invoked for multicast frames
- *
- * XXX: clean up
- */
- __ieee80211_tx_prepare(tx, skb, dev);
- dev_put(dev);
- return 0;
-}
-
static int __ieee80211_tx(struct ieee80211_local *local,
struct sk_buff **skbp,
- struct sta_info *sta)
+ struct sta_info *sta,
+ bool txpending)
{
struct sk_buff *skb = *skbp, *next;
struct ieee80211_tx_info *info;
+ struct ieee80211_sub_if_data *sdata;
+ unsigned long flags;
int ret, len;
bool fragm = false;
- local->mdev->trans_start = jiffies;
-
while (skb) {
- if (ieee80211_queue_stopped(&local->hw,
- skb_get_queue_mapping(skb)))
- return IEEE80211_TX_PENDING;
+ int q = skb_get_queue_mapping(skb);
+
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ ret = IEEE80211_TX_OK;
+ if (local->queue_stop_reasons[q] ||
+ (!txpending && !skb_queue_empty(&local->pending[q])))
+ ret = IEEE80211_TX_PENDING;
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+ if (ret != IEEE80211_TX_OK)
+ return ret;
info = IEEE80211_SKB_CB(skb);
@@ -1172,13 +1152,35 @@
next = skb->next;
len = skb->len;
+
+ if (next)
+ info->flags |= IEEE80211_TX_CTL_MORE_FRAMES;
+
+ sdata = vif_to_sdata(info->control.vif);
+
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_MONITOR:
+ info->control.vif = NULL;
+ break;
+ case NL80211_IFTYPE_AP_VLAN:
+ info->control.vif = &container_of(sdata->bss,
+ struct ieee80211_sub_if_data, u.ap)->vif;
+ break;
+ default:
+ /* keep */
+ break;
+ }
+
ret = drv_tx(local, skb);
if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) {
dev_kfree_skb(skb);
ret = NETDEV_TX_OK;
}
- if (ret != NETDEV_TX_OK)
+ if (ret != NETDEV_TX_OK) {
+ info->control.vif = &sdata->vif;
return IEEE80211_TX_AGAIN;
+ }
+
*skbp = skb = next;
ieee80211_led_tx(local, 1);
fragm = true;
@@ -1210,9 +1212,9 @@
CALL_TXH(ieee80211_tx_h_sequence)
CALL_TXH(ieee80211_tx_h_fragment)
/* handlers after fragment must be aware of tx info fragmentation! */
+ CALL_TXH(ieee80211_tx_h_stats)
CALL_TXH(ieee80211_tx_h_encrypt)
CALL_TXH(ieee80211_tx_h_calculate_duration)
- CALL_TXH(ieee80211_tx_h_stats)
#undef CALL_TXH
txh_done:
@@ -1234,10 +1236,10 @@
return 0;
}
-static void ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
- bool txpending)
+static void ieee80211_tx(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, bool txpending)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_tx_data tx;
ieee80211_tx_result res_prepare;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -1248,8 +1250,6 @@
queue = skb_get_queue_mapping(skb);
- WARN_ON(!txpending && !skb_queue_empty(&local->pending[queue]));
-
if (unlikely(skb->len < 10)) {
dev_kfree_skb(skb);
return;
@@ -1258,7 +1258,7 @@
rcu_read_lock();
/* initialises tx */
- res_prepare = __ieee80211_tx_prepare(&tx, skb, dev);
+ res_prepare = ieee80211_tx_prepare(sdata, &tx, skb);
if (unlikely(res_prepare == TX_DROP)) {
dev_kfree_skb(skb);
@@ -1277,7 +1277,7 @@
retries = 0;
retry:
- ret = __ieee80211_tx(local, &tx.skb, tx.sta);
+ ret = __ieee80211_tx(local, &tx.skb, tx.sta, txpending);
switch (ret) {
case IEEE80211_TX_OK:
break;
@@ -1295,34 +1295,35 @@
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
- if (__netif_subqueue_stopped(local->mdev, queue)) {
+ if (local->queue_stop_reasons[queue] ||
+ !skb_queue_empty(&local->pending[queue])) {
+ /*
+ * if queue is stopped, queue up frames for later
+ * transmission from the tasklet
+ */
do {
next = skb->next;
skb->next = NULL;
if (unlikely(txpending))
- skb_queue_head(&local->pending[queue],
- skb);
+ __skb_queue_head(&local->pending[queue],
+ skb);
else
- skb_queue_tail(&local->pending[queue],
- skb);
+ __skb_queue_tail(&local->pending[queue],
+ skb);
} while ((skb = next));
- /*
- * Make sure nobody will enable the queue on us
- * (without going through the tasklet) nor disable the
- * netdev queue underneath the pending handling code.
- */
- __set_bit(IEEE80211_QUEUE_STOP_REASON_PENDING,
- &local->queue_stop_reasons[queue]);
-
spin_unlock_irqrestore(&local->queue_stop_reason_lock,
flags);
} else {
+ /*
+ * otherwise retry, but this is a race condition or
+ * a driver bug (which we warn about if it persists)
+ */
spin_unlock_irqrestore(&local->queue_stop_reason_lock,
flags);
retries++;
- if (WARN(retries > 10, "tx refused but queue active"))
+ if (WARN(retries > 10, "tx refused but queue active\n"))
goto drop;
goto retry;
}
@@ -1383,44 +1384,25 @@
return 0;
}
-int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct net_device *odev = NULL;
- struct ieee80211_sub_if_data *osdata;
+ struct ieee80211_sub_if_data *tmp_sdata;
int headroom;
bool may_encrypt;
- enum {
- NOT_MONITOR,
- FOUND_SDATA,
- UNKNOWN_ADDRESS,
- } monitor_iface = NOT_MONITOR;
- if (skb->iif)
- odev = dev_get_by_index(&init_net, skb->iif);
- if (unlikely(odev && !is_ieee80211_device(local, odev))) {
- dev_put(odev);
- odev = NULL;
- }
- if (unlikely(!odev)) {
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "%s: Discarded packet with nonexistent "
- "originating device\n", dev->name);
-#endif
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
+ dev_hold(sdata->dev);
if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
local->hw.conf.dynamic_ps_timeout > 0 &&
- !local->sw_scanning && !local->hw_scanning && local->ps_sdata) {
+ !(local->scanning) && local->ps_sdata) {
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
ieee80211_stop_queues_by_reason(&local->hw,
IEEE80211_QUEUE_STOP_REASON_PS);
- queue_work(local->hw.workqueue,
+ ieee80211_queue_work(&local->hw,
&local->dynamic_ps_disable_work);
}
@@ -1428,31 +1410,13 @@
msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
}
- memset(info, 0, sizeof(*info));
-
info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
- osdata = IEEE80211_DEV_TO_SUB_IF(odev);
-
- if (ieee80211_vif_is_mesh(&osdata->vif) &&
- ieee80211_is_data(hdr->frame_control)) {
- if (is_multicast_ether_addr(hdr->addr3))
- memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
- else
- if (mesh_nexthop_lookup(skb, osdata)) {
- dev_put(odev);
- return NETDEV_TX_OK;
- }
- if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
- IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
- fwded_frames);
- } else if (unlikely(osdata->vif.type == NL80211_IFTYPE_MONITOR)) {
- struct ieee80211_sub_if_data *sdata;
+ if (unlikely(sdata->vif.type == NL80211_IFTYPE_MONITOR)) {
int hdrlen;
u16 len_rthdr;
info->flags |= IEEE80211_TX_CTL_INJECTED;
- monitor_iface = UNKNOWN_ADDRESS;
len_rthdr = ieee80211_get_radiotap_len(skb->data);
hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
@@ -1471,20 +1435,17 @@
*/
rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces,
+ list_for_each_entry_rcu(tmp_sdata, &local->interfaces,
list) {
- if (!netif_running(sdata->dev))
+ if (!netif_running(tmp_sdata->dev))
continue;
- if (sdata->vif.type != NL80211_IFTYPE_AP)
+ if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
continue;
- if (compare_ether_addr(sdata->dev->dev_addr,
+ if (compare_ether_addr(tmp_sdata->dev->dev_addr,
hdr->addr2)) {
- dev_hold(sdata->dev);
- dev_put(odev);
- osdata = sdata;
- odev = osdata->dev;
- skb->iif = sdata->dev->ifindex;
- monitor_iface = FOUND_SDATA;
+ dev_hold(tmp_sdata->dev);
+ dev_put(sdata->dev);
+ sdata = tmp_sdata;
break;
}
}
@@ -1492,40 +1453,44 @@
}
}
- may_encrypt = !skb->do_not_encrypt;
+ may_encrypt = !(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT);
- headroom = osdata->local->tx_headroom;
+ headroom = local->tx_headroom;
if (may_encrypt)
headroom += IEEE80211_ENCRYPT_HEADROOM;
headroom -= skb_headroom(skb);
headroom = max_t(int, 0, headroom);
- if (ieee80211_skb_resize(osdata->local, skb, headroom, may_encrypt)) {
+ if (ieee80211_skb_resize(local, skb, headroom, may_encrypt)) {
dev_kfree_skb(skb);
- dev_put(odev);
- return NETDEV_TX_OK;
+ dev_put(sdata->dev);
+ return;
}
- if (osdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- osdata = container_of(osdata->bss,
- struct ieee80211_sub_if_data,
- u.ap);
- if (likely(monitor_iface != UNKNOWN_ADDRESS))
- info->control.vif = &osdata->vif;
+ info->control.vif = &sdata->vif;
- ieee80211_tx(odev, skb, false);
- dev_put(odev);
+ if (ieee80211_vif_is_mesh(&sdata->vif) &&
+ ieee80211_is_data(hdr->frame_control) &&
+ !is_multicast_ether_addr(hdr->addr1))
+ if (mesh_nexthop_lookup(skb, sdata)) {
+ /* skb queued: don't free */
+ dev_put(sdata->dev);
+ return;
+ }
- return NETDEV_TX_OK;
+ ieee80211_select_queue(local, skb);
+ ieee80211_tx(sdata, skb, false);
+ dev_put(sdata->dev);
}
-int ieee80211_monitor_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_channel *chan = local->hw.conf.channel;
struct ieee80211_radiotap_header *prthdr =
(struct ieee80211_radiotap_header *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u16 len_rthdr;
/*
@@ -1563,15 +1528,6 @@
if (unlikely(skb->len < len_rthdr))
goto fail; /* skb too short for claimed rt header extent */
- skb->dev = local->mdev;
-
- /* needed because we set skb device to master */
- skb->iif = dev->ifindex;
-
- /* sometimes we do encrypt injected frames, will be fixed
- * up in radiotap parser if not wanted */
- skb->do_not_encrypt = 0;
-
/*
* fix up the pointers accounting for the radiotap
* header still being in there. We are being given
@@ -1586,8 +1542,10 @@
skb_set_network_header(skb, len_rthdr);
skb_set_transport_header(skb, len_rthdr);
- /* pass the radiotap header up to the next stage intact */
- dev_queue_xmit(skb);
+ memset(info, 0, sizeof(*info));
+
+ /* pass the radiotap header up to xmit */
+ ieee80211_xmit(IEEE80211_DEV_TO_SUB_IF(dev), skb);
return NETDEV_TX_OK;
fail:
@@ -1610,11 +1568,12 @@
* encapsulated packet will then be passed to master interface, wlan#.11, for
* transmission (through low-level driver).
*/
-int ieee80211_subif_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
+netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int ret = NETDEV_TX_BUSY, head_need;
u16 ethertype, hdrlen, meshhdrlen = 0;
__le16 fc;
@@ -1627,7 +1586,7 @@
u32 sta_flags = 0;
if (unlikely(skb->len < ETH_HLEN)) {
- ret = 0;
+ ret = NETDEV_TX_OK;
goto fail;
}
@@ -1660,52 +1619,58 @@
break;
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
- fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
if (!sdata->u.mesh.mshcfg.dot11MeshTTL) {
/* Do not send frames with mesh_ttl == 0 */
sdata->u.mesh.mshstats.dropped_frames_ttl++;
- ret = 0;
+ ret = NETDEV_TX_OK;
goto fail;
}
- memset(&mesh_hdr, 0, sizeof(mesh_hdr));
if (compare_ether_addr(dev->dev_addr,
skb->data + ETH_ALEN) == 0) {
- /* RA TA DA SA */
- memset(hdr.addr1, 0, ETH_ALEN);
- memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
- memcpy(hdr.addr3, skb->data, ETH_ALEN);
- memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
- meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata);
+ hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
+ skb->data, skb->data + ETH_ALEN);
+ meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
+ sdata, NULL, NULL, NULL);
} else {
/* packet from other interface */
struct mesh_path *mppath;
+ int is_mesh_mcast = 1;
+ char *mesh_da;
- memset(hdr.addr1, 0, ETH_ALEN);
- memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
- memcpy(hdr.addr4, dev->dev_addr, ETH_ALEN);
-
+ rcu_read_lock();
if (is_multicast_ether_addr(skb->data))
- memcpy(hdr.addr3, skb->data, ETH_ALEN);
+ /* DA TA mSA AE:SA */
+ mesh_da = skb->data;
else {
- rcu_read_lock();
mppath = mpp_path_lookup(skb->data, sdata);
- if (mppath)
- memcpy(hdr.addr3, mppath->mpp, ETH_ALEN);
- else
- memset(hdr.addr3, 0xff, ETH_ALEN);
- rcu_read_unlock();
+ if (mppath) {
+ /* RA TA mDA mSA AE:DA SA */
+ mesh_da = mppath->mpp;
+ is_mesh_mcast = 0;
+ } else
+ /* DA TA mSA AE:SA */
+ mesh_da = dev->broadcast;
}
+ hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
+ mesh_da, dev->dev_addr);
+ rcu_read_unlock();
+ if (is_mesh_mcast)
+ meshhdrlen =
+ ieee80211_new_mesh_header(&mesh_hdr,
+ sdata,
+ skb->data + ETH_ALEN,
+ NULL,
+ NULL);
+ else
+ meshhdrlen =
+ ieee80211_new_mesh_header(&mesh_hdr,
+ sdata,
+ NULL,
+ skb->data,
+ skb->data + ETH_ALEN);
- mesh_hdr.flags |= MESH_FLAGS_AE_A5_A6;
- mesh_hdr.ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
- put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &mesh_hdr.seqnum);
- memcpy(mesh_hdr.eaddr1, skb->data, ETH_ALEN);
- memcpy(mesh_hdr.eaddr2, skb->data + ETH_ALEN, ETH_ALEN);
- sdata->u.mesh.mesh_seqnum++;
- meshhdrlen = 18;
}
- hdrlen = 30;
break;
#endif
case NL80211_IFTYPE_STATION:
@@ -1724,7 +1689,7 @@
hdrlen = 24;
break;
default:
- ret = 0;
+ ret = NETDEV_TX_OK;
goto fail;
}
@@ -1766,7 +1731,7 @@
I802_DEBUG_INC(local->tx_handlers_drop_unauth_port);
- ret = 0;
+ ret = NETDEV_TX_OK;
goto fail;
}
@@ -1842,9 +1807,6 @@
nh_pos += hdrlen;
h_pos += hdrlen;
- skb->iif = dev->ifindex;
-
- skb->dev = local->mdev;
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
@@ -1855,13 +1817,15 @@
skb_set_network_header(skb, nh_pos);
skb_set_transport_header(skb, h_pos);
- dev->trans_start = jiffies;
- dev_queue_xmit(skb);
+ memset(info, 0, sizeof(*info));
- return 0;
+ dev->trans_start = jiffies;
+ ieee80211_xmit(sdata, skb);
+
+ return NETDEV_TX_OK;
fail:
- if (!ret)
+ if (ret == NETDEV_TX_OK)
dev_kfree_skb(skb);
return ret;
@@ -1887,101 +1851,74 @@
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
struct ieee80211_hdr *hdr;
- struct net_device *dev;
int ret;
bool result = true;
- /* does interface still exist? */
- dev = dev_get_by_index(&init_net, skb->iif);
- if (!dev) {
- dev_kfree_skb(skb);
- return true;
- }
-
- /* validate info->control.vif against skb->iif */
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- sdata = container_of(sdata->bss,
- struct ieee80211_sub_if_data,
- u.ap);
-
- if (unlikely(info->control.vif && info->control.vif != &sdata->vif)) {
- dev_kfree_skb(skb);
- result = true;
- goto out;
- }
+ sdata = vif_to_sdata(info->control.vif);
if (info->flags & IEEE80211_TX_INTFL_NEED_TXPROCESSING) {
- ieee80211_tx(dev, skb, true);
+ ieee80211_tx(sdata, skb, true);
} else {
hdr = (struct ieee80211_hdr *)skb->data;
sta = sta_info_get(local, hdr->addr1);
- ret = __ieee80211_tx(local, &skb, sta);
+ ret = __ieee80211_tx(local, &skb, sta, true);
if (ret != IEEE80211_TX_OK)
result = false;
}
- out:
- dev_put(dev);
-
return result;
}
/*
- * Transmit all pending packets. Called from tasklet, locks master device
- * TX lock so that no new packets can come in.
+ * Transmit all pending packets. Called from tasklet.
*/
void ieee80211_tx_pending(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *)data;
- struct net_device *dev = local->mdev;
unsigned long flags;
int i;
- bool next;
+ bool txok;
rcu_read_lock();
- netif_tx_lock_bh(dev);
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
for (i = 0; i < local->hw.queues; i++) {
/*
* If queue is stopped by something other than due to pending
* frames, or we have no pending frames, proceed to next queue.
*/
- spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
- next = false;
- if (local->queue_stop_reasons[i] !=
- BIT(IEEE80211_QUEUE_STOP_REASON_PENDING) ||
+ if (local->queue_stop_reasons[i] ||
skb_queue_empty(&local->pending[i]))
- next = true;
- spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
-
- if (next)
continue;
- /*
- * start the queue now to allow processing our packets,
- * we're under the tx lock here anyway so nothing will
- * happen as a result of this
- */
- netif_start_subqueue(local->mdev, i);
-
while (!skb_queue_empty(&local->pending[i])) {
- struct sk_buff *skb = skb_dequeue(&local->pending[i]);
+ struct sk_buff *skb = __skb_dequeue(&local->pending[i]);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_sub_if_data *sdata;
- if (!ieee80211_tx_pending_skb(local, skb)) {
- skb_queue_head(&local->pending[i], skb);
- break;
+ if (WARN_ON(!info->control.vif)) {
+ kfree_skb(skb);
+ continue;
}
+
+ sdata = vif_to_sdata(info->control.vif);
+ dev_hold(sdata->dev);
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock,
+ flags);
+
+ txok = ieee80211_tx_pending_skb(local, skb);
+ dev_put(sdata->dev);
+ if (!txok)
+ __skb_queue_head(&local->pending[i], skb);
+ spin_lock_irqsave(&local->queue_stop_reason_lock,
+ flags);
+ if (!txok)
+ break;
}
-
- /* Start regular packet processing again. */
- if (skb_queue_empty(&local->pending[i]))
- ieee80211_wake_queue_by_reason(&local->hw, i,
- IEEE80211_QUEUE_STOP_REASON_PENDING);
}
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- netif_tx_unlock_bh(dev);
rcu_read_unlock();
}
@@ -2156,8 +2093,7 @@
info = IEEE80211_SKB_CB(skb);
- skb->do_not_encrypt = 1;
-
+ info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
info->band = band;
/*
* XXX: For now, always use the lowest rate
@@ -2228,9 +2164,6 @@
sdata = vif_to_sdata(vif);
bss = &sdata->u.ap;
- if (!bss)
- return NULL;
-
rcu_read_lock();
beacon = rcu_dereference(bss->beacon);
@@ -2256,7 +2189,7 @@
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
}
- if (!ieee80211_tx_prepare(local, &tx, skb))
+ if (!ieee80211_tx_prepare(sdata, &tx, skb))
break;
dev_kfree_skb_any(skb);
}
@@ -2276,3 +2209,24 @@
return skb;
}
EXPORT_SYMBOL(ieee80211_get_buffered_bc);
+
+void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
+ int encrypt)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ skb_set_mac_header(skb, 0);
+ skb_set_network_header(skb, 0);
+ skb_set_transport_header(skb, 0);
+
+ if (!encrypt)
+ info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ /*
+ * The other path calling ieee80211_xmit is from the tasklet,
+ * and while we can handle concurrent transmissions locking
+ * requirements are that we do not come into tx with bhs on.
+ */
+ local_bh_disable();
+ ieee80211_xmit(sdata, skb);
+ local_bh_enable();
+}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 915e777..dd65643 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -31,6 +31,7 @@
#include "mesh.h"
#include "wme.h"
#include "led.h"
+#include "wep.h"
/* privid for wiphys to determine whether they belong to us or not */
void *mac80211_wiphy_privid = &mac80211_wiphy_privid;
@@ -274,16 +275,12 @@
__clear_bit(reason, &local->queue_stop_reasons[queue]);
- if (!skb_queue_empty(&local->pending[queue]) &&
- local->queue_stop_reasons[queue] ==
- BIT(IEEE80211_QUEUE_STOP_REASON_PENDING))
- tasklet_schedule(&local->tx_pending_tasklet);
-
if (local->queue_stop_reasons[queue] != 0)
/* someone still has this queue stopped */
return;
- netif_wake_subqueue(local->mdev, queue);
+ if (!skb_queue_empty(&local->pending[queue]))
+ tasklet_schedule(&local->tx_pending_tasklet);
}
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
@@ -312,14 +309,6 @@
if (WARN_ON(queue >= hw->queues))
return;
- /*
- * Only stop if it was previously running, this is necessary
- * for correct pending packets handling because there we may
- * start (but not wake) the queue and rely on that.
- */
- if (!local->queue_stop_reasons[queue])
- netif_stop_subqueue(local->mdev, queue);
-
__set_bit(reason, &local->queue_stop_reasons[queue]);
}
@@ -347,11 +336,16 @@
struct ieee80211_hw *hw = &local->hw;
unsigned long flags;
int queue = skb_get_queue_mapping(skb);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ if (WARN_ON(!info->control.vif)) {
+ kfree(skb);
+ return;
+ }
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
__ieee80211_stop_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
- __ieee80211_stop_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_PENDING);
- skb_queue_tail(&local->pending[queue], skb);
+ __skb_queue_tail(&local->pending[queue], skb);
__ieee80211_wake_queue(hw, queue, IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
}
@@ -370,18 +364,21 @@
IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
while ((skb = skb_dequeue(skbs))) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ if (WARN_ON(!info->control.vif)) {
+ kfree(skb);
+ continue;
+ }
+
ret++;
queue = skb_get_queue_mapping(skb);
- skb_queue_tail(&local->pending[queue], skb);
+ __skb_queue_tail(&local->pending[queue], skb);
}
- for (i = 0; i < hw->queues; i++) {
- if (ret)
- __ieee80211_stop_queue(hw, i,
- IEEE80211_QUEUE_STOP_REASON_PENDING);
+ for (i = 0; i < hw->queues; i++)
__ieee80211_wake_queue(hw, i,
IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
- }
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
return ret;
@@ -412,11 +409,16 @@
int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue)
{
struct ieee80211_local *local = hw_to_local(hw);
+ unsigned long flags;
+ int ret;
if (WARN_ON(queue >= hw->queues))
return true;
- return __netif_subqueue_stopped(local->mdev, queue);
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ ret = !!local->queue_stop_reasons[queue];
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+ return ret;
}
EXPORT_SYMBOL(ieee80211_queue_stopped);
@@ -509,6 +511,46 @@
}
EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
+/*
+ * Nothing should have been stuffed into the workqueue during
+ * the suspend->resume cycle. If this WARN is seen then there
+ * is a bug with either the driver suspend or something in
+ * mac80211 stuffing into the workqueue which we haven't yet
+ * cleared during mac80211's suspend cycle.
+ */
+static bool ieee80211_can_queue_work(struct ieee80211_local *local)
+{
+ if (WARN(local->suspended, "queueing ieee80211 work while "
+ "going to suspend\n"))
+ return false;
+
+ return true;
+}
+
+void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ if (!ieee80211_can_queue_work(local))
+ return;
+
+ queue_work(local->workqueue, work);
+}
+EXPORT_SYMBOL(ieee80211_queue_work);
+
+void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
+ struct delayed_work *dwork,
+ unsigned long delay)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ if (!ieee80211_can_queue_work(local))
+ return;
+
+ queue_delayed_work(local->workqueue, dwork, delay);
+}
+EXPORT_SYMBOL(ieee80211_queue_delayed_work);
+
void ieee802_11_parse_elems(u8 *start, size_t len,
struct ieee802_11_elems *elems)
{
@@ -760,20 +802,6 @@
ieee80211_set_wmm_default(sdata);
}
-void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- int encrypt)
-{
- skb->dev = sdata->local->mdev;
- skb_set_mac_header(skb, 0);
- skb_set_network_header(skb, 0);
- skb_set_transport_header(skb, 0);
-
- skb->iif = sdata->dev->ifindex;
- skb->do_not_encrypt = !encrypt;
-
- dev_queue_xmit(skb);
-}
-
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band)
{
@@ -804,12 +832,13 @@
void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
u16 transaction, u16 auth_alg,
- u8 *extra, size_t extra_len,
- const u8 *bssid, int encrypt)
+ u8 *extra, size_t extra_len, const u8 *bssid,
+ const u8 *key, u8 key_len, u8 key_idx)
{
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
+ int err;
skb = dev_alloc_skb(local->hw.extra_tx_headroom +
sizeof(*mgmt) + 6 + extra_len);
@@ -824,8 +853,6 @@
memset(mgmt, 0, 24 + 6);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_AUTH);
- if (encrypt)
- mgmt->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
memcpy(mgmt->da, bssid, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, bssid, ETH_ALEN);
@@ -835,7 +862,13 @@
if (extra)
memcpy(skb_put(skb, extra_len), extra, extra_len);
- ieee80211_tx_skb(sdata, skb, encrypt);
+ if (auth_alg == WLAN_AUTH_SHARED_KEY && transaction == 3) {
+ mgmt->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+ err = ieee80211_wep_encrypt(local, skb, key, key_len, key_idx);
+ WARN_ON(err);
+ }
+
+ ieee80211_tx_skb(sdata, skb, 0);
}
int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
@@ -974,6 +1007,16 @@
return supp_rates;
}
+void ieee80211_stop_device(struct ieee80211_local *local)
+{
+ ieee80211_led_radio(local, false);
+
+ cancel_work_sync(&local->reconfig_filter);
+ drv_stop(local);
+
+ flush_workqueue(local->workqueue);
+}
+
int ieee80211_reconfig(struct ieee80211_local *local)
{
struct ieee80211_hw *hw = &local->hw;
@@ -1043,9 +1086,7 @@
/* reconfigure hardware */
ieee80211_hw_config(local, ~0);
- netif_addr_lock_bh(local->mdev);
ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
/* Finally also reconfigure all the BSS information */
list_for_each_entry(sdata, &local->interfaces, list) {
@@ -1121,3 +1162,4 @@
#endif
return 0;
}
+
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index ef73105..8a980f1 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -67,10 +67,10 @@
static void ieee80211_wep_get_iv(struct ieee80211_local *local,
- struct ieee80211_key *key, u8 *iv)
+ int keylen, int keyidx, u8 *iv)
{
local->wep_iv++;
- if (ieee80211_wep_weak_iv(local->wep_iv, key->conf.keylen))
+ if (ieee80211_wep_weak_iv(local->wep_iv, keylen))
local->wep_iv += 0x0100;
if (!iv)
@@ -79,13 +79,13 @@
*iv++ = (local->wep_iv >> 16) & 0xff;
*iv++ = (local->wep_iv >> 8) & 0xff;
*iv++ = local->wep_iv & 0xff;
- *iv++ = key->conf.keyidx << 6;
+ *iv++ = keyidx << 6;
}
static u8 *ieee80211_wep_add_iv(struct ieee80211_local *local,
struct sk_buff *skb,
- struct ieee80211_key *key)
+ int keylen, int keyidx)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
unsigned int hdrlen;
@@ -100,7 +100,7 @@
hdrlen = ieee80211_hdrlen(hdr->frame_control);
newhdr = skb_push(skb, WEP_IV_LEN);
memmove(newhdr, newhdr + WEP_IV_LEN, hdrlen);
- ieee80211_wep_get_iv(local, key, newhdr + hdrlen);
+ ieee80211_wep_get_iv(local, keylen, keyidx, newhdr + hdrlen);
return newhdr + hdrlen;
}
@@ -144,43 +144,32 @@
*
* WEP frame payload: IV + TX key idx, RC4(data), ICV = RC4(CRC32(data))
*/
-int ieee80211_wep_encrypt(struct ieee80211_local *local, struct sk_buff *skb,
- struct ieee80211_key *key)
+int ieee80211_wep_encrypt(struct ieee80211_local *local,
+ struct sk_buff *skb,
+ const u8 *key, int keylen, int keyidx)
{
- u32 klen;
- u8 *rc4key, *iv;
+ u8 *iv;
size_t len;
+ u8 rc4key[3 + WLAN_KEY_LEN_WEP104];
- if (!key || key->conf.alg != ALG_WEP)
+ iv = ieee80211_wep_add_iv(local, skb, keylen, keyidx);
+ if (!iv)
return -1;
- klen = 3 + key->conf.keylen;
- rc4key = kmalloc(klen, GFP_ATOMIC);
- if (!rc4key)
- return -1;
-
- iv = ieee80211_wep_add_iv(local, skb, key);
- if (!iv) {
- kfree(rc4key);
- return -1;
- }
-
len = skb->len - (iv + WEP_IV_LEN - skb->data);
/* Prepend 24-bit IV to RC4 key */
memcpy(rc4key, iv, 3);
/* Copy rest of the WEP key (the secret part) */
- memcpy(rc4key + 3, key->conf.key, key->conf.keylen);
+ memcpy(rc4key + 3, key, keylen);
/* Add room for ICV */
skb_put(skb, WEP_ICV_LEN);
- ieee80211_wep_encrypt_data(local->wep_tx_tfm, rc4key, klen,
+ ieee80211_wep_encrypt_data(local->wep_tx_tfm, rc4key, keylen + 3,
iv + WEP_IV_LEN, len);
- kfree(rc4key);
-
return 0;
}
@@ -216,8 +205,9 @@
* failure. If frame is OK, IV and ICV will be removed, i.e., decrypted payload
* is moved to the beginning of the skb and skb length will be reduced.
*/
-int ieee80211_wep_decrypt(struct ieee80211_local *local, struct sk_buff *skb,
- struct ieee80211_key *key)
+static int ieee80211_wep_decrypt(struct ieee80211_local *local,
+ struct sk_buff *skb,
+ struct ieee80211_key *key)
{
u32 klen;
u8 *rc4key;
@@ -314,12 +304,16 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (!(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) {
- if (ieee80211_wep_encrypt(tx->local, skb, tx->key))
+ if (ieee80211_wep_encrypt(tx->local, skb, tx->key->conf.key,
+ tx->key->conf.keylen,
+ tx->key->conf.keyidx))
return -1;
} else {
info->control.hw_key = &tx->key->conf;
if (tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) {
- if (!ieee80211_wep_add_iv(tx->local, skb, tx->key))
+ if (!ieee80211_wep_add_iv(tx->local, skb,
+ tx->key->conf.keylen,
+ tx->key->conf.keyidx))
return -1;
}
}
diff --git a/net/mac80211/wep.h b/net/mac80211/wep.h
index d3f0db4..fe29d7e 100644
--- a/net/mac80211/wep.h
+++ b/net/mac80211/wep.h
@@ -20,12 +20,11 @@
void ieee80211_wep_free(struct ieee80211_local *local);
void ieee80211_wep_encrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key,
size_t klen, u8 *data, size_t data_len);
+int ieee80211_wep_encrypt(struct ieee80211_local *local,
+ struct sk_buff *skb,
+ const u8 *key, int keylen, int keyidx);
int ieee80211_wep_decrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key,
size_t klen, u8 *data, size_t data_len);
-int ieee80211_wep_encrypt(struct ieee80211_local *local, struct sk_buff *skb,
- struct ieee80211_key *key);
-int ieee80211_wep_decrypt(struct ieee80211_local *local, struct sk_buff *skb,
- struct ieee80211_key *key);
bool ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key);
ieee80211_rx_result
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
deleted file mode 100644
index 1da81f4..0000000
--- a/net/mac80211/wext.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * Copyright 2002-2005, Instant802 Networks, Inc.
- * Copyright 2005-2006, Devicescape Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/skbuff.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <asm/uaccess.h>
-
-#include <net/mac80211.h>
-#include "ieee80211_i.h"
-#include "led.h"
-#include "rate.h"
-#include "wpa.h"
-#include "aes_ccm.h"
-
-
-static int ieee80211_ioctl_siwgenie(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra)
-{
- struct ieee80211_sub_if_data *sdata;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- int ret = ieee80211_sta_set_extra_ie(sdata, extra, data->length);
- if (ret && ret != -EALREADY)
- return ret;
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
- sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
- sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
- if (ret != -EALREADY)
- ieee80211_sta_req_auth(sdata);
- return 0;
- }
-
- return -EOPNOTSUPP;
-}
-
-static int ieee80211_ioctl_siwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_channel *chan;
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
- else if (sdata->vif.type == NL80211_IFTYPE_STATION)
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_CHANNEL_SEL;
-
- /* freq->e == 0: freq->m = channel; otherwise freq = m * 10^e */
- if (freq->e == 0) {
- if (freq->m < 0) {
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- sdata->u.mgd.flags |=
- IEEE80211_STA_AUTO_CHANNEL_SEL;
- return 0;
- } else
- chan = ieee80211_get_channel(local->hw.wiphy,
- ieee80211_channel_to_frequency(freq->m));
- } else {
- int i, div = 1000000;
- for (i = 0; i < freq->e; i++)
- div /= 10;
- if (div <= 0)
- return -EINVAL;
- chan = ieee80211_get_channel(local->hw.wiphy, freq->m / div);
- }
-
- if (!chan)
- return -EINVAL;
-
- if (chan->flags & IEEE80211_CHAN_DISABLED)
- return -EINVAL;
-
- /*
- * no change except maybe auto -> fixed, ignore the HT
- * setting so you can fix a channel you're on already
- */
- if (local->oper_channel == chan)
- return 0;
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- ieee80211_sta_req_auth(sdata);
-
- local->oper_channel = chan;
- local->oper_channel_type = NL80211_CHAN_NO_HT;
- ieee80211_hw_config(local, 0);
-
- return 0;
-}
-
-
-static int ieee80211_ioctl_giwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
-
- freq->m = local->oper_channel->center_freq;
- freq->e = 6;
-
- return 0;
-}
-
-
-static int ieee80211_ioctl_siwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- size_t len = data->length;
- int ret;
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
-
- /* iwconfig uses nul termination in SSID.. */
- if (len > 0 && ssid[len - 1] == '\0')
- len--;
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (data->flags)
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
- else
- sdata->u.mgd.flags |= IEEE80211_STA_AUTO_SSID_SEL;
-
- ret = ieee80211_sta_set_ssid(sdata, ssid, len);
- if (ret)
- return ret;
-
- sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
- sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
- ieee80211_sta_req_auth(sdata);
- return 0;
- }
-
- return -EOPNOTSUPP;
-}
-
-
-static int ieee80211_ioctl_giwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *ssid)
-{
- size_t len;
- struct ieee80211_sub_if_data *sdata;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- int res = ieee80211_sta_get_ssid(sdata, ssid, &len);
- if (res == 0) {
- data->length = len;
- data->flags = 1;
- } else
- data->flags = 0;
- return res;
- }
-
- return -EOPNOTSUPP;
-}
-
-
-static int ieee80211_ioctl_siwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- int ret;
-
- if (is_zero_ether_addr((u8 *) &ap_addr->sa_data))
- sdata->u.mgd.flags |= IEEE80211_STA_AUTO_BSSID_SEL |
- IEEE80211_STA_AUTO_CHANNEL_SEL;
- else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
- sdata->u.mgd.flags |= IEEE80211_STA_AUTO_BSSID_SEL;
- else
- sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
- ret = ieee80211_sta_set_bssid(sdata, (u8 *) &ap_addr->sa_data);
- if (ret)
- return ret;
- sdata->u.mgd.flags &= ~IEEE80211_STA_EXT_SME;
- sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
- ieee80211_sta_req_auth(sdata);
- return 0;
- } else if (sdata->vif.type == NL80211_IFTYPE_WDS) {
- /*
- * If it is necessary to update the WDS peer address
- * while the interface is running, then we need to do
- * more work here, namely if it is running we need to
- * add a new and remove the old STA entry, this is
- * normally handled by _open() and _stop().
- */
- if (netif_running(dev))
- return -EBUSY;
-
- memcpy(&sdata->u.wds.remote_addr, (u8 *) &ap_addr->sa_data,
- ETH_ALEN);
-
- return 0;
- }
-
- return -EOPNOTSUPP;
-}
-
-
-static int ieee80211_ioctl_giwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.state == IEEE80211_STA_MLME_ASSOCIATED) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, sdata->u.mgd.bssid, ETH_ALEN);
- } else
- memset(&ap_addr->sa_data, 0, ETH_ALEN);
- return 0;
- } else if (sdata->vif.type == NL80211_IFTYPE_WDS) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
- return 0;
- }
-
- return -EOPNOTSUPP;
-}
-
-
-static int ieee80211_ioctl_siwrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rate, char *extra)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- int i, err = -EINVAL;
- u32 target_rate = rate->value / 100000;
- struct ieee80211_sub_if_data *sdata;
- struct ieee80211_supported_band *sband;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
- /* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
- * target_rate = X, rate->fixed = 1 means only rate X
- * target_rate = X, rate->fixed = 0 means all rates <= X */
- sdata->max_ratectrl_rateidx = -1;
- sdata->force_unicast_rateidx = -1;
- if (rate->value < 0)
- return 0;
-
- for (i=0; i< sband->n_bitrates; i++) {
- struct ieee80211_rate *brate = &sband->bitrates[i];
- int this_rate = brate->bitrate;
-
- if (target_rate == this_rate) {
- sdata->max_ratectrl_rateidx = i;
- if (rate->fixed)
- sdata->force_unicast_rateidx = i;
- err = 0;
- break;
- }
- }
- return err;
-}
-
-static int ieee80211_ioctl_giwrate(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rate, char *extra)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct sta_info *sta;
- struct ieee80211_sub_if_data *sdata;
- struct ieee80211_supported_band *sband;
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- return -EOPNOTSUPP;
-
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
- rcu_read_lock();
-
- sta = sta_info_get(local, sdata->u.mgd.bssid);
-
- if (sta && !(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS))
- rate->value = sband->bitrates[sta->last_tx_rate.idx].bitrate;
- else
- rate->value = 0;
-
- rcu_read_unlock();
-
- if (!sta)
- return -ENODEV;
-
- rate->value *= 100000;
-
- return 0;
-}
-
-static int ieee80211_ioctl_siwpower(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *wrq,
- char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_conf *conf = &local->hw.conf;
- int timeout = 0;
- bool ps;
-
- if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
- return -EOPNOTSUPP;
-
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- return -EINVAL;
-
- if (wrq->disabled) {
- ps = false;
- timeout = 0;
- goto set;
- }
-
- switch (wrq->flags & IW_POWER_MODE) {
- case IW_POWER_ON: /* If not specified */
- case IW_POWER_MODE: /* If set all mask */
- case IW_POWER_ALL_R: /* If explicitely state all */
- ps = true;
- break;
- default: /* Otherwise we ignore */
- return -EINVAL;
- }
-
- if (wrq->flags & ~(IW_POWER_MODE | IW_POWER_TIMEOUT))
- return -EINVAL;
-
- if (wrq->flags & IW_POWER_TIMEOUT)
- timeout = wrq->value / 1000;
-
- set:
- if (ps == sdata->u.mgd.powersave && timeout == conf->dynamic_ps_timeout)
- return 0;
-
- sdata->u.mgd.powersave = ps;
- conf->dynamic_ps_timeout = timeout;
-
- if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
-
- ieee80211_recalc_ps(local, -1);
-
- return 0;
-}
-
-static int ieee80211_ioctl_giwpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
- wrqu->power.disabled = !sdata->u.mgd.powersave;
-
- return 0;
-}
-
-static int ieee80211_ioctl_siwauth(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *data, char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- int ret = 0;
-
- switch (data->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- case IW_AUTH_CIPHER_GROUP:
- case IW_AUTH_WPA_ENABLED:
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- case IW_AUTH_KEY_MGMT:
- case IW_AUTH_CIPHER_GROUP_MGMT:
- break;
- case IW_AUTH_CIPHER_PAIRWISE:
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (data->value & (IW_AUTH_CIPHER_WEP40 |
- IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_TKIP))
- sdata->u.mgd.flags |=
- IEEE80211_STA_TKIP_WEP_USED;
- else
- sdata->u.mgd.flags &=
- ~IEEE80211_STA_TKIP_WEP_USED;
- }
- break;
- case IW_AUTH_DROP_UNENCRYPTED:
- sdata->drop_unencrypted = !!data->value;
- break;
- case IW_AUTH_PRIVACY_INVOKED:
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- ret = -EINVAL;
- else {
- sdata->u.mgd.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
- /*
- * Privacy invoked by wpa_supplicant, store the
- * value and allow associating to a protected
- * network without having a key up front.
- */
- if (data->value)
- sdata->u.mgd.flags |=
- IEEE80211_STA_PRIVACY_INVOKED;
- }
- break;
- case IW_AUTH_80211_AUTH_ALG:
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- sdata->u.mgd.auth_algs = data->value;
- else
- ret = -EOPNOTSUPP;
- break;
- case IW_AUTH_MFP:
- if (!(sdata->local->hw.flags & IEEE80211_HW_MFP_CAPABLE)) {
- ret = -EOPNOTSUPP;
- break;
- }
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- switch (data->value) {
- case IW_AUTH_MFP_DISABLED:
- sdata->u.mgd.mfp = IEEE80211_MFP_DISABLED;
- break;
- case IW_AUTH_MFP_OPTIONAL:
- sdata->u.mgd.mfp = IEEE80211_MFP_OPTIONAL;
- break;
- case IW_AUTH_MFP_REQUIRED:
- sdata->u.mgd.mfp = IEEE80211_MFP_REQUIRED;
- break;
- default:
- ret = -EINVAL;
- }
- } else
- ret = -EOPNOTSUPP;
- break;
- default:
- ret = -EOPNOTSUPP;
- break;
- }
- return ret;
-}
-
-/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
-static struct iw_statistics *ieee80211_get_wireless_stats(struct net_device *dev)
-{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct iw_statistics *wstats = &local->wstats;
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct sta_info *sta = NULL;
-
- rcu_read_lock();
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- sta = sta_info_get(local, sdata->u.mgd.bssid);
-
- if (!sta) {
- wstats->discard.fragment = 0;
- wstats->discard.misc = 0;
- wstats->qual.qual = 0;
- wstats->qual.level = 0;
- wstats->qual.noise = 0;
- wstats->qual.updated = IW_QUAL_ALL_INVALID;
- } else {
- wstats->qual.updated = 0;
- /*
- * mirror what cfg80211 does for iwrange/scan results,
- * otherwise userspace gets confused.
- */
- if (local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
- IEEE80211_HW_SIGNAL_DBM)) {
- wstats->qual.updated |= IW_QUAL_LEVEL_UPDATED;
- wstats->qual.updated |= IW_QUAL_QUAL_UPDATED;
- } else {
- wstats->qual.updated |= IW_QUAL_LEVEL_INVALID;
- wstats->qual.updated |= IW_QUAL_QUAL_INVALID;
- }
-
- if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) {
- wstats->qual.level = sta->last_signal;
- wstats->qual.qual = sta->last_signal;
- } else if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
- int sig = sta->last_signal;
-
- wstats->qual.updated |= IW_QUAL_DBM;
- wstats->qual.level = sig;
- if (sig < -110)
- sig = -110;
- else if (sig > -40)
- sig = -40;
- wstats->qual.qual = sig + 110;
- }
-
- if (local->hw.flags & IEEE80211_HW_NOISE_DBM) {
- /*
- * This assumes that if driver reports noise, it also
- * reports signal in dBm.
- */
- wstats->qual.noise = sta->last_noise;
- wstats->qual.updated |= IW_QUAL_NOISE_UPDATED;
- } else {
- wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
- }
- }
-
- rcu_read_unlock();
-
- return wstats;
-}
-
-static int ieee80211_ioctl_giwauth(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *data, char *extra)
-{
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- int ret = 0;
-
- switch (data->flags & IW_AUTH_INDEX) {
- case IW_AUTH_80211_AUTH_ALG:
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- data->value = sdata->u.mgd.auth_algs;
- else
- ret = -EOPNOTSUPP;
- break;
- default:
- ret = -EOPNOTSUPP;
- break;
- }
- return ret;
-}
-
-
-/* Structures to export the Wireless Handlers */
-
-static const iw_handler ieee80211_handler[] =
-{
- (iw_handler) NULL, /* SIOCSIWCOMMIT */
- (iw_handler) cfg80211_wext_giwname, /* SIOCGIWNAME */
- (iw_handler) NULL, /* SIOCSIWNWID */
- (iw_handler) NULL, /* SIOCGIWNWID */
- (iw_handler) ieee80211_ioctl_siwfreq, /* SIOCSIWFREQ */
- (iw_handler) ieee80211_ioctl_giwfreq, /* SIOCGIWFREQ */
- (iw_handler) cfg80211_wext_siwmode, /* SIOCSIWMODE */
- (iw_handler) cfg80211_wext_giwmode, /* SIOCGIWMODE */
- (iw_handler) NULL, /* SIOCSIWSENS */
- (iw_handler) NULL, /* SIOCGIWSENS */
- (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */
- (iw_handler) cfg80211_wext_giwrange, /* SIOCGIWRANGE */
- (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */
- (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */
- (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */
- (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */
- (iw_handler) NULL, /* SIOCSIWSPY */
- (iw_handler) NULL, /* SIOCGIWSPY */
- (iw_handler) NULL, /* SIOCSIWTHRSPY */
- (iw_handler) NULL, /* SIOCGIWTHRSPY */
- (iw_handler) ieee80211_ioctl_siwap, /* SIOCSIWAP */
- (iw_handler) ieee80211_ioctl_giwap, /* SIOCGIWAP */
- (iw_handler) cfg80211_wext_siwmlme, /* SIOCSIWMLME */
- (iw_handler) NULL, /* SIOCGIWAPLIST */
- (iw_handler) cfg80211_wext_siwscan, /* SIOCSIWSCAN */
- (iw_handler) cfg80211_wext_giwscan, /* SIOCGIWSCAN */
- (iw_handler) ieee80211_ioctl_siwessid, /* SIOCSIWESSID */
- (iw_handler) ieee80211_ioctl_giwessid, /* SIOCGIWESSID */
- (iw_handler) NULL, /* SIOCSIWNICKN */
- (iw_handler) NULL, /* SIOCGIWNICKN */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) ieee80211_ioctl_siwrate, /* SIOCSIWRATE */
- (iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */
- (iw_handler) cfg80211_wext_siwrts, /* SIOCSIWRTS */
- (iw_handler) cfg80211_wext_giwrts, /* SIOCGIWRTS */
- (iw_handler) cfg80211_wext_siwfrag, /* SIOCSIWFRAG */
- (iw_handler) cfg80211_wext_giwfrag, /* SIOCGIWFRAG */
- (iw_handler) cfg80211_wext_siwtxpower, /* SIOCSIWTXPOW */
- (iw_handler) cfg80211_wext_giwtxpower, /* SIOCGIWTXPOW */
- (iw_handler) cfg80211_wext_siwretry, /* SIOCSIWRETRY */
- (iw_handler) cfg80211_wext_giwretry, /* SIOCGIWRETRY */
- (iw_handler) cfg80211_wext_siwencode, /* SIOCSIWENCODE */
- (iw_handler) cfg80211_wext_giwencode, /* SIOCGIWENCODE */
- (iw_handler) ieee80211_ioctl_siwpower, /* SIOCSIWPOWER */
- (iw_handler) ieee80211_ioctl_giwpower, /* SIOCGIWPOWER */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) ieee80211_ioctl_siwgenie, /* SIOCSIWGENIE */
- (iw_handler) NULL, /* SIOCGIWGENIE */
- (iw_handler) ieee80211_ioctl_siwauth, /* SIOCSIWAUTH */
- (iw_handler) ieee80211_ioctl_giwauth, /* SIOCGIWAUTH */
- (iw_handler) cfg80211_wext_siwencodeext, /* SIOCSIWENCODEEXT */
- (iw_handler) NULL, /* SIOCGIWENCODEEXT */
- (iw_handler) NULL, /* SIOCSIWPMKSA */
- (iw_handler) NULL, /* -- hole -- */
-};
-
-const struct iw_handler_def ieee80211_iw_handler_def =
-{
- .num_standard = ARRAY_SIZE(ieee80211_handler),
- .standard = (iw_handler *) ieee80211_handler,
- .get_wireless_stats = ieee80211_get_wireless_stats,
-};
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 116a923..b19b769 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -85,10 +85,8 @@
return ieee802_1d_to_ac[skb->priority];
}
-u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb)
+void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb)
{
- struct ieee80211_master_priv *mpriv = netdev_priv(dev);
- struct ieee80211_local *local = mpriv->local;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
u16 queue;
u8 tid;
@@ -113,5 +111,5 @@
*p = 0;
}
- return queue;
+ skb_set_queue_mapping(skb, queue);
}
diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h
index 7520d2e..d4fd87c 100644
--- a/net/mac80211/wme.h
+++ b/net/mac80211/wme.h
@@ -20,6 +20,7 @@
extern const int ieee802_1d_to_ac[8];
-u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb);
+void ieee80211_select_queue(struct ieee80211_local *local,
+ struct sk_buff *skb);
#endif /* _WME_H */
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index dcfae88..7077869 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -122,7 +122,8 @@
return RX_DROP_UNUSABLE;
mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
- (void *) skb->data, NULL);
+ (void *) skb->data, NULL,
+ GFP_ATOMIC);
return RX_DROP_UNUSABLE;
}
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index 201b8ea..3c7e427 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -18,6 +18,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
@@ -262,12 +265,12 @@
if (vseq->delta || vseq->previous_delta) {
if(after(seq, vseq->init_seq)) {
th->seq = htonl(seq + vseq->delta);
- IP_VS_DBG(9, "vs_fix_seq(): added delta (%d) to seq\n",
- vseq->delta);
+ IP_VS_DBG(9, "%s(): added delta (%d) to seq\n",
+ __func__, vseq->delta);
} else {
th->seq = htonl(seq + vseq->previous_delta);
- IP_VS_DBG(9, "vs_fix_seq(): added previous_delta "
- "(%d) to seq\n", vseq->previous_delta);
+ IP_VS_DBG(9, "%s(): added previous_delta (%d) to seq\n",
+ __func__, vseq->previous_delta);
}
}
}
@@ -291,14 +294,14 @@
to receive next, so compare it with init_seq+delta */
if(after(ack_seq, vseq->init_seq+vseq->delta)) {
th->ack_seq = htonl(ack_seq - vseq->delta);
- IP_VS_DBG(9, "vs_fix_ack_seq(): subtracted delta "
- "(%d) from ack_seq\n", vseq->delta);
+ IP_VS_DBG(9, "%s(): subtracted delta "
+ "(%d) from ack_seq\n", __func__, vseq->delta);
} else {
th->ack_seq = htonl(ack_seq - vseq->previous_delta);
- IP_VS_DBG(9, "vs_fix_ack_seq(): subtracted "
+ IP_VS_DBG(9, "%s(): subtracted "
"previous_delta (%d) from ack_seq\n",
- vseq->previous_delta);
+ __func__, vseq->previous_delta);
}
}
}
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 77bfdfe..27c30cf 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -22,6 +22,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/net.h>
@@ -150,8 +153,8 @@
atomic_inc(&cp->refcnt);
ret = 1;
} else {
- IP_VS_ERR("ip_vs_conn_hash(): request for already hashed, "
- "called from %p\n", __builtin_return_address(0));
+ pr_err("%s(): request for already hashed, called from %pF\n",
+ __func__, __builtin_return_address(0));
ret = 0;
}
@@ -689,7 +692,7 @@
cp = kmem_cache_zalloc(ip_vs_conn_cachep, GFP_ATOMIC);
if (cp == NULL) {
- IP_VS_ERR_RL("ip_vs_conn_new: no memory available.\n");
+ IP_VS_ERR_RL("%s(): no memory\n", __func__);
return NULL;
}
@@ -1073,10 +1076,10 @@
return -ENOMEM;
}
- IP_VS_INFO("Connection hash table configured "
- "(size=%d, memory=%ldKbytes)\n",
- IP_VS_CONN_TAB_SIZE,
- (long)(IP_VS_CONN_TAB_SIZE*sizeof(struct list_head))/1024);
+ pr_info("Connection hash table configured "
+ "(size=%d, memory=%ldKbytes)\n",
+ IP_VS_CONN_TAB_SIZE,
+ (long)(IP_VS_CONN_TAB_SIZE*sizeof(struct list_head))/1024);
IP_VS_DBG(0, "Each connection entry needs %Zd bytes at least\n",
sizeof(struct ip_vs_conn));
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 8dddb17..b95699f 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -24,6 +24,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ip.h>
@@ -388,9 +391,9 @@
*/
if (!svc->fwmark && pptr[1] != svc->port) {
if (!svc->port)
- IP_VS_ERR("Schedule: port zero only supported "
- "in persistent services, "
- "check your ipvs configuration\n");
+ pr_err("Schedule: port zero only supported "
+ "in persistent services, "
+ "check your ipvs configuration\n");
return NULL;
}
@@ -462,7 +465,7 @@
ip_vs_service_put(svc);
/* create a new connection entry */
- IP_VS_DBG(6, "ip_vs_leave: create a cache_bypass entry\n");
+ IP_VS_DBG(6, "%s(): create a cache_bypass entry\n", __func__);
cp = ip_vs_conn_new(svc->af, iph.protocol,
&iph.saddr, pptr[0],
&iph.daddr, pptr[1],
@@ -664,8 +667,8 @@
unsigned int verdict = NF_DROP;
if (IP_VS_FWD_METHOD(cp) != 0) {
- IP_VS_ERR("shouldn't reach here, because the box is on the "
- "half connection in the tun/dr module.\n");
+ pr_err("shouldn't reach here, because the box is on the "
+ "half connection in the tun/dr module.\n");
}
/* Ensure the checksum is correct */
@@ -1256,7 +1259,7 @@
struct ip_vs_iphdr iph;
struct ip_vs_protocol *pp;
struct ip_vs_conn *cp;
- int ret, restart, af;
+ int ret, restart, af, pkts;
af = (skb->protocol == htons(ETH_P_IP)) ? AF_INET : AF_INET6;
@@ -1274,13 +1277,24 @@
return NF_ACCEPT;
}
- if (unlikely(iph.protocol == IPPROTO_ICMP)) {
- int related, verdict = ip_vs_in_icmp(skb, &related, hooknum);
+#ifdef CONFIG_IP_VS_IPV6
+ if (af == AF_INET6) {
+ if (unlikely(iph.protocol == IPPROTO_ICMPV6)) {
+ int related, verdict = ip_vs_in_icmp_v6(skb, &related, hooknum);
- if (related)
- return verdict;
- ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
- }
+ if (related)
+ return verdict;
+ ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
+ }
+ } else
+#endif
+ if (unlikely(iph.protocol == IPPROTO_ICMP)) {
+ int related, verdict = ip_vs_in_icmp(skb, &related, hooknum);
+
+ if (related)
+ return verdict;
+ ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
+ }
/* Protocol supported? */
pp = ip_vs_proto_get(iph.protocol);
@@ -1343,12 +1357,12 @@
* Sync connection if it is about to close to
* encorage the standby servers to update the connections timeout
*/
- atomic_inc(&cp->in_pkts);
+ pkts = atomic_add_return(1, &cp->in_pkts);
if (af == AF_INET &&
(ip_vs_sync_state & IP_VS_STATE_MASTER) &&
(((cp->protocol != IPPROTO_TCP ||
cp->state == IP_VS_TCP_S_ESTABLISHED) &&
- (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1]
+ (pkts % sysctl_ip_vs_sync_threshold[1]
== sysctl_ip_vs_sync_threshold[0])) ||
((cp->protocol == IPPROTO_TCP) && (cp->old_state != cp->state) &&
((cp->state == IP_VS_TCP_S_FIN_WAIT) ||
@@ -1487,7 +1501,7 @@
ret = ip_vs_control_init();
if (ret < 0) {
- IP_VS_ERR("can't setup control.\n");
+ pr_err("can't setup control.\n");
goto cleanup_estimator;
}
@@ -1495,23 +1509,23 @@
ret = ip_vs_app_init();
if (ret < 0) {
- IP_VS_ERR("can't setup application helper.\n");
+ pr_err("can't setup application helper.\n");
goto cleanup_protocol;
}
ret = ip_vs_conn_init();
if (ret < 0) {
- IP_VS_ERR("can't setup connection table.\n");
+ pr_err("can't setup connection table.\n");
goto cleanup_app;
}
ret = nf_register_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
if (ret < 0) {
- IP_VS_ERR("can't register hooks.\n");
+ pr_err("can't register hooks.\n");
goto cleanup_conn;
}
- IP_VS_INFO("ipvs loaded.\n");
+ pr_info("ipvs loaded.\n");
return ret;
cleanup_conn:
@@ -1534,7 +1548,7 @@
ip_vs_protocol_cleanup();
ip_vs_control_cleanup();
ip_vs_estimator_cleanup();
- IP_VS_INFO("ipvs unloaded.\n");
+ pr_info("ipvs unloaded.\n");
}
module_init(ip_vs_init);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 7c1333c..fba2892 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -18,6 +18,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -340,8 +343,8 @@
unsigned hash;
if (svc->flags & IP_VS_SVC_F_HASHED) {
- IP_VS_ERR("ip_vs_svc_hash(): request for already hashed, "
- "called from %p\n", __builtin_return_address(0));
+ pr_err("%s(): request for already hashed, called from %pF\n",
+ __func__, __builtin_return_address(0));
return 0;
}
@@ -374,8 +377,8 @@
static int ip_vs_svc_unhash(struct ip_vs_service *svc)
{
if (!(svc->flags & IP_VS_SVC_F_HASHED)) {
- IP_VS_ERR("ip_vs_svc_unhash(): request for unhash flagged, "
- "called from %p\n", __builtin_return_address(0));
+ pr_err("%s(): request for unhash flagged, called from %pF\n",
+ __func__, __builtin_return_address(0));
return 0;
}
@@ -841,7 +844,7 @@
dest = kzalloc(sizeof(struct ip_vs_dest), GFP_ATOMIC);
if (dest == NULL) {
- IP_VS_ERR("ip_vs_new_dest: kmalloc failed.\n");
+ pr_err("%s(): no memory.\n", __func__);
return -ENOMEM;
}
@@ -885,13 +888,13 @@
EnterFunction(2);
if (udest->weight < 0) {
- IP_VS_ERR("ip_vs_add_dest(): server weight less than zero\n");
+ pr_err("%s(): server weight less than zero\n", __func__);
return -ERANGE;
}
if (udest->l_threshold > udest->u_threshold) {
- IP_VS_ERR("ip_vs_add_dest(): lower threshold is higher than "
- "upper threshold\n");
+ pr_err("%s(): lower threshold is higher than upper threshold\n",
+ __func__);
return -ERANGE;
}
@@ -903,7 +906,7 @@
dest = ip_vs_lookup_dest(svc, &daddr, dport);
if (dest != NULL) {
- IP_VS_DBG(1, "ip_vs_add_dest(): dest already exists\n");
+ IP_VS_DBG(1, "%s(): dest already exists\n", __func__);
return -EEXIST;
}
@@ -997,13 +1000,13 @@
EnterFunction(2);
if (udest->weight < 0) {
- IP_VS_ERR("ip_vs_edit_dest(): server weight less than zero\n");
+ pr_err("%s(): server weight less than zero\n", __func__);
return -ERANGE;
}
if (udest->l_threshold > udest->u_threshold) {
- IP_VS_ERR("ip_vs_edit_dest(): lower threshold is higher than "
- "upper threshold\n");
+ pr_err("%s(): lower threshold is higher than upper threshold\n",
+ __func__);
return -ERANGE;
}
@@ -1015,7 +1018,7 @@
dest = ip_vs_lookup_dest(svc, &daddr, dport);
if (dest == NULL) {
- IP_VS_DBG(1, "ip_vs_edit_dest(): dest doesn't exist\n");
+ IP_VS_DBG(1, "%s(): dest doesn't exist\n", __func__);
return -ENOENT;
}
@@ -1115,7 +1118,7 @@
dest = ip_vs_lookup_dest(svc, &udest->addr, dport);
if (dest == NULL) {
- IP_VS_DBG(1, "ip_vs_del_dest(): destination not found!\n");
+ IP_VS_DBG(1, "%s(): destination not found!\n", __func__);
return -ENOENT;
}
@@ -1161,8 +1164,7 @@
/* Lookup the scheduler by 'u->sched_name' */
sched = ip_vs_scheduler_get(u->sched_name);
if (sched == NULL) {
- IP_VS_INFO("Scheduler module ip_vs_%s not found\n",
- u->sched_name);
+ pr_info("Scheduler module ip_vs_%s not found\n", u->sched_name);
ret = -ENOENT;
goto out_mod_dec;
}
@@ -1176,7 +1178,7 @@
svc = kzalloc(sizeof(struct ip_vs_service), GFP_ATOMIC);
if (svc == NULL) {
- IP_VS_DBG(1, "ip_vs_add_service: kmalloc failed.\n");
+ IP_VS_DBG(1, "%s(): no memory\n", __func__);
ret = -ENOMEM;
goto out_err;
}
@@ -1259,8 +1261,7 @@
*/
sched = ip_vs_scheduler_get(u->sched_name);
if (sched == NULL) {
- IP_VS_INFO("Scheduler module ip_vs_%s not found\n",
- u->sched_name);
+ pr_info("Scheduler module ip_vs_%s not found\n", u->sched_name);
return -ENOENT;
}
old_sched = sched;
@@ -2077,8 +2078,8 @@
return -EPERM;
if (len != set_arglen[SET_CMDID(cmd)]) {
- IP_VS_ERR("set_ctl: len %u != %u\n",
- len, set_arglen[SET_CMDID(cmd)]);
+ pr_err("set_ctl: len %u != %u\n",
+ len, set_arglen[SET_CMDID(cmd)]);
return -EINVAL;
}
@@ -2129,9 +2130,9 @@
/* Check for valid protocol: TCP or UDP, even for fwmark!=0 */
if (usvc.protocol != IPPROTO_TCP && usvc.protocol != IPPROTO_UDP) {
- IP_VS_ERR("set_ctl: invalid protocol: %d %pI4:%d %s\n",
- usvc.protocol, &usvc.addr.ip,
- ntohs(usvc.port), usvc.sched_name);
+ pr_err("set_ctl: invalid protocol: %d %pI4:%d %s\n",
+ usvc.protocol, &usvc.addr.ip,
+ ntohs(usvc.port), usvc.sched_name);
ret = -EFAULT;
goto out_unlock;
}
@@ -2356,8 +2357,8 @@
return -EPERM;
if (*len < get_arglen[GET_CMDID(cmd)]) {
- IP_VS_ERR("get_ctl: len %u < %u\n",
- *len, get_arglen[GET_CMDID(cmd)]);
+ pr_err("get_ctl: len %u < %u\n",
+ *len, get_arglen[GET_CMDID(cmd)]);
return -EINVAL;
}
@@ -2402,7 +2403,7 @@
size = sizeof(*get) +
sizeof(struct ip_vs_service_entry) * get->num_services;
if (*len != size) {
- IP_VS_ERR("length: %u != %u\n", *len, size);
+ pr_err("length: %u != %u\n", *len, size);
ret = -EINVAL;
goto out;
}
@@ -2442,7 +2443,7 @@
size = sizeof(*get) +
sizeof(struct ip_vs_dest_entry) * get->num_dests;
if (*len != size) {
- IP_VS_ERR("length: %u != %u\n", *len, size);
+ pr_err("length: %u != %u\n", *len, size);
ret = -EINVAL;
goto out;
}
@@ -3170,7 +3171,7 @@
else if (cmd == IPVS_CMD_GET_CONFIG)
reply_cmd = IPVS_CMD_SET_CONFIG;
else {
- IP_VS_ERR("unknown Generic Netlink command\n");
+ pr_err("unknown Generic Netlink command\n");
return -EINVAL;
}
@@ -3231,11 +3232,11 @@
}
genlmsg_end(msg, reply);
- ret = genlmsg_unicast(msg, info->snd_pid);
+ ret = genlmsg_reply(msg, info);
goto out;
nla_put_failure:
- IP_VS_ERR("not enough space in Netlink message\n");
+ pr_err("not enough space in Netlink message\n");
ret = -EMSGSIZE;
out_err:
@@ -3366,13 +3367,13 @@
ret = nf_register_sockopt(&ip_vs_sockopts);
if (ret) {
- IP_VS_ERR("cannot register sockopt.\n");
+ pr_err("cannot register sockopt.\n");
return ret;
}
ret = ip_vs_genl_register();
if (ret) {
- IP_VS_ERR("cannot register Generic Netlink interface.\n");
+ pr_err("cannot register Generic Netlink interface.\n");
nf_unregister_sockopt(&ip_vs_sockopts);
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_dh.c b/net/netfilter/ipvs/ip_vs_dh.c
index a9dac74..fe3e188 100644
--- a/net/netfilter/ipvs/ip_vs_dh.c
+++ b/net/netfilter/ipvs/ip_vs_dh.c
@@ -35,6 +35,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/ip.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -147,7 +150,7 @@
tbl = kmalloc(sizeof(struct ip_vs_dh_bucket)*IP_VS_DH_TAB_SIZE,
GFP_ATOMIC);
if (tbl == NULL) {
- IP_VS_ERR("ip_vs_dh_init_svc(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return -ENOMEM;
}
svc->sched_data = tbl;
@@ -214,7 +217,7 @@
ip_vs_fill_iphdr(svc->af, skb_network_header(skb), &iph);
- IP_VS_DBG(6, "ip_vs_dh_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
tbl = (struct ip_vs_dh_bucket *)svc->sched_data;
dest = ip_vs_dh_get(svc->af, tbl, &iph.daddr);
diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c
index 2eb2860..702b53c 100644
--- a/net/netfilter/ipvs/ip_vs_est.c
+++ b/net/netfilter/ipvs/ip_vs_est.c
@@ -11,6 +11,10 @@
* Changes:
*
*/
+
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/slab.h>
diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index 428edbf..33e2c79 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -22,6 +22,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
@@ -382,8 +385,8 @@
ret = register_ip_vs_app_inc(app, app->protocol, ports[i]);
if (ret)
break;
- IP_VS_INFO("%s: loaded support on port[%d] = %d\n",
- app->name, i, ports[i]);
+ pr_info("%s: loaded support on port[%d] = %d\n",
+ app->name, i, ports[i]);
}
if (ret)
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 3eb5e26..c1757f3 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -39,6 +39,9 @@
* me to write this module.
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/ip.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -199,7 +202,7 @@
if (!en) {
en = kmalloc(sizeof(*en), GFP_ATOMIC);
if (!en) {
- IP_VS_ERR("ip_vs_lblc_new(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return NULL;
}
@@ -332,7 +335,7 @@
*/
tbl = kmalloc(sizeof(*tbl), GFP_ATOMIC);
if (tbl == NULL) {
- IP_VS_ERR("ip_vs_lblc_init_svc(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return -ENOMEM;
}
svc->sched_data = tbl;
@@ -477,7 +480,7 @@
ip_vs_fill_iphdr(svc->af, skb_network_header(skb), &iph);
- IP_VS_DBG(6, "ip_vs_lblc_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
/* First look in our cache */
read_lock(&svc->sched_lock);
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index c04ce56..715b57f 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -37,6 +37,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/ip.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -108,7 +111,7 @@
e = kmalloc(sizeof(*e), GFP_ATOMIC);
if (e == NULL) {
- IP_VS_ERR("ip_vs_dest_set_insert(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return NULL;
}
@@ -202,8 +205,9 @@
}
}
- IP_VS_DBG_BUF(6, "ip_vs_dest_set_min: server %s:%d "
+ IP_VS_DBG_BUF(6, "%s(): server %s:%d "
"activeconns %d refcnt %d weight %d overhead %d\n",
+ __func__,
IP_VS_DBG_ADDR(least->af, &least->addr),
ntohs(least->port),
atomic_read(&least->activeconns),
@@ -249,8 +253,9 @@
}
}
- IP_VS_DBG_BUF(6, "ip_vs_dest_set_max: server %s:%d "
+ IP_VS_DBG_BUF(6, "%s(): server %s:%d "
"activeconns %d refcnt %d weight %d overhead %d\n",
+ __func__,
IP_VS_DBG_ADDR(most->af, &most->addr), ntohs(most->port),
atomic_read(&most->activeconns),
atomic_read(&most->refcnt),
@@ -374,7 +379,7 @@
if (!en) {
en = kmalloc(sizeof(*en), GFP_ATOMIC);
if (!en) {
- IP_VS_ERR("ip_vs_lblcr_new(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return NULL;
}
@@ -508,7 +513,7 @@
*/
tbl = kmalloc(sizeof(*tbl), GFP_ATOMIC);
if (tbl == NULL) {
- IP_VS_ERR("ip_vs_lblcr_init_svc(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return -ENOMEM;
}
svc->sched_data = tbl;
@@ -654,7 +659,7 @@
ip_vs_fill_iphdr(svc->af, skb_network_header(skb), &iph);
- IP_VS_DBG(6, "ip_vs_lblcr_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
/* First look in our cache */
read_lock(&svc->sched_lock);
diff --git a/net/netfilter/ipvs/ip_vs_lc.c b/net/netfilter/ipvs/ip_vs_lc.c
index d0dadc8..4f69db1 100644
--- a/net/netfilter/ipvs/ip_vs_lc.c
+++ b/net/netfilter/ipvs/ip_vs_lc.c
@@ -14,6 +14,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
@@ -44,7 +47,7 @@
struct ip_vs_dest *dest, *least = NULL;
unsigned int loh = 0, doh;
- IP_VS_DBG(6, "ip_vs_lc_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
/*
* Simply select the server with the least number of
diff --git a/net/netfilter/ipvs/ip_vs_nq.c b/net/netfilter/ipvs/ip_vs_nq.c
index 694952d..c413e18 100644
--- a/net/netfilter/ipvs/ip_vs_nq.c
+++ b/net/netfilter/ipvs/ip_vs_nq.c
@@ -31,6 +31,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
@@ -57,7 +60,7 @@
struct ip_vs_dest *dest, *least = NULL;
unsigned int loh = 0, doh;
- IP_VS_DBG(6, "ip_vs_nq_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
/*
* We calculate the load of each dest server as follows:
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index a01520e..3e76716 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -13,6 +13,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
@@ -124,7 +127,8 @@
* Set timeout value for state specified by name
*/
int
-ip_vs_set_state_timeout(int *table, int num, char **names, char *name, int to)
+ip_vs_set_state_timeout(int *table, int num, const char *const *names,
+ const char *name, int to)
{
int i;
@@ -181,7 +185,7 @@
&ih->daddr, ntohs(pptr[1]));
}
- printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
+ pr_debug("%s: %s\n", msg, buf);
}
#ifdef CONFIG_IP_VS_IPV6
@@ -215,7 +219,7 @@
&ih->daddr, ntohs(pptr[1]));
}
- printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
+ pr_debug("%s: %s\n", msg, buf);
}
#endif
@@ -259,7 +263,7 @@
#ifdef CONFIG_IP_VS_PROTO_ESP
REGISTER_PROTOCOL(&ip_vs_protocol_esp);
#endif
- IP_VS_INFO("Registered protocols (%s)\n", &protocols[2]);
+ pr_info("Registered protocols (%s)\n", &protocols[2]);
return 0;
}
diff --git a/net/netfilter/ipvs/ip_vs_proto_ah_esp.c b/net/netfilter/ipvs/ip_vs_proto_ah_esp.c
index 79f56c1..c30b43c 100644
--- a/net/netfilter/ipvs/ip_vs_proto_ah_esp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_ah_esp.c
@@ -10,6 +10,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/module.h>
@@ -138,7 +141,7 @@
sprintf(buf, "%s %pI4->%pI4",
pp->name, &ih->saddr, &ih->daddr);
- printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
+ pr_debug("%s: %s\n", msg, buf);
}
#ifdef CONFIG_IP_VS_IPV6
@@ -156,7 +159,7 @@
sprintf(buf, "%s %pI6->%pI6",
pp->name, &ih->saddr, &ih->daddr);
- printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
+ pr_debug("%s: %s\n", msg, buf);
}
#endif
diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c
index 8cba418..91d28e0 100644
--- a/net/netfilter/ipvs/ip_vs_proto_tcp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c
@@ -13,6 +13,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/kernel.h>
#include <linux/ip.h>
#include <linux/tcp.h> /* for tcphdr */
@@ -374,7 +377,7 @@
[IP_VS_TCP_S_LAST] = 2*HZ,
};
-static char * tcp_state_name_table[IP_VS_TCP_S_LAST+1] = {
+static const char *const tcp_state_name_table[IP_VS_TCP_S_LAST+1] = {
[IP_VS_TCP_S_NONE] = "NONE",
[IP_VS_TCP_S_ESTABLISHED] = "ESTABLISHED",
[IP_VS_TCP_S_SYN_SENT] = "SYN_SENT",
@@ -661,7 +664,7 @@
break;
spin_unlock(&tcp_app_lock);
- IP_VS_DBG_BUF(9, "%s: Binding conn %s:%u->"
+ IP_VS_DBG_BUF(9, "%s(): Binding conn %s:%u->"
"%s:%u to app %s on port %u\n",
__func__,
IP_VS_DBG_ADDR(cp->af, &cp->caddr),
diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c
index d2930a7..e7a6885 100644
--- a/net/netfilter/ipvs/ip_vs_proto_udp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_udp.c
@@ -13,6 +13,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/kernel.h>
@@ -442,7 +445,7 @@
break;
spin_unlock(&udp_app_lock);
- IP_VS_DBG_BUF(9, "%s: Binding conn %s:%u->"
+ IP_VS_DBG_BUF(9, "%s(): Binding conn %s:%u->"
"%s:%u to app %s on port %u\n",
__func__,
IP_VS_DBG_ADDR(cp->af, &cp->caddr),
@@ -469,7 +472,7 @@
[IP_VS_UDP_S_LAST] = 2*HZ,
};
-static char * udp_state_name_table[IP_VS_UDP_S_LAST+1] = {
+static const char *const udp_state_name_table[IP_VS_UDP_S_LAST+1] = {
[IP_VS_UDP_S_NORMAL] = "UDP",
[IP_VS_UDP_S_LAST] = "BUG!",
};
diff --git a/net/netfilter/ipvs/ip_vs_rr.c b/net/netfilter/ipvs/ip_vs_rr.c
index 2d16ab7..e210f37 100644
--- a/net/netfilter/ipvs/ip_vs_rr.c
+++ b/net/netfilter/ipvs/ip_vs_rr.c
@@ -19,6 +19,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
@@ -48,7 +51,7 @@
struct list_head *p, *q;
struct ip_vs_dest *dest;
- IP_VS_DBG(6, "ip_vs_rr_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
write_lock(&svc->sched_lock);
p = (struct list_head *)svc->sched_data;
diff --git a/net/netfilter/ipvs/ip_vs_sched.c b/net/netfilter/ipvs/ip_vs_sched.c
index a46ad9e..bbc1ac7 100644
--- a/net/netfilter/ipvs/ip_vs_sched.c
+++ b/net/netfilter/ipvs/ip_vs_sched.c
@@ -17,6 +17,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
@@ -44,11 +47,11 @@
int ret;
if (svc == NULL) {
- IP_VS_ERR("ip_vs_bind_scheduler(): svc arg NULL\n");
+ pr_err("%s(): svc arg NULL\n", __func__);
return -EINVAL;
}
if (scheduler == NULL) {
- IP_VS_ERR("ip_vs_bind_scheduler(): scheduler arg NULL\n");
+ pr_err("%s(): scheduler arg NULL\n", __func__);
return -EINVAL;
}
@@ -57,7 +60,7 @@
if (scheduler->init_service) {
ret = scheduler->init_service(svc);
if (ret) {
- IP_VS_ERR("ip_vs_bind_scheduler(): init error\n");
+ pr_err("%s(): init error\n", __func__);
return ret;
}
}
@@ -74,19 +77,19 @@
struct ip_vs_scheduler *sched;
if (svc == NULL) {
- IP_VS_ERR("ip_vs_unbind_scheduler(): svc arg NULL\n");
+ pr_err("%s(): svc arg NULL\n", __func__);
return -EINVAL;
}
sched = svc->scheduler;
if (sched == NULL) {
- IP_VS_ERR("ip_vs_unbind_scheduler(): svc isn't bound\n");
+ pr_err("%s(): svc isn't bound\n", __func__);
return -EINVAL;
}
if (sched->done_service) {
if (sched->done_service(svc) != 0) {
- IP_VS_ERR("ip_vs_unbind_scheduler(): done error\n");
+ pr_err("%s(): done error\n", __func__);
return -EINVAL;
}
}
@@ -103,8 +106,7 @@
{
struct ip_vs_scheduler *sched;
- IP_VS_DBG(2, "ip_vs_sched_getbyname(): sched_name \"%s\"\n",
- sched_name);
+ IP_VS_DBG(2, "%s(): sched_name \"%s\"\n", __func__, sched_name);
read_lock_bh(&__ip_vs_sched_lock);
@@ -170,12 +172,12 @@
struct ip_vs_scheduler *sched;
if (!scheduler) {
- IP_VS_ERR("register_ip_vs_scheduler(): NULL arg\n");
+ pr_err("%s(): NULL arg\n", __func__);
return -EINVAL;
}
if (!scheduler->name) {
- IP_VS_ERR("register_ip_vs_scheduler(): NULL scheduler_name\n");
+ pr_err("%s(): NULL scheduler_name\n", __func__);
return -EINVAL;
}
@@ -187,8 +189,8 @@
if (!list_empty(&scheduler->n_list)) {
write_unlock_bh(&__ip_vs_sched_lock);
ip_vs_use_count_dec();
- IP_VS_ERR("register_ip_vs_scheduler(): [%s] scheduler "
- "already linked\n", scheduler->name);
+ pr_err("%s(): [%s] scheduler already linked\n",
+ __func__, scheduler->name);
return -EINVAL;
}
@@ -200,9 +202,8 @@
if (strcmp(scheduler->name, sched->name) == 0) {
write_unlock_bh(&__ip_vs_sched_lock);
ip_vs_use_count_dec();
- IP_VS_ERR("register_ip_vs_scheduler(): [%s] scheduler "
- "already existed in the system\n",
- scheduler->name);
+ pr_err("%s(): [%s] scheduler already existed "
+ "in the system\n", __func__, scheduler->name);
return -EINVAL;
}
}
@@ -212,7 +213,7 @@
list_add(&scheduler->n_list, &ip_vs_schedulers);
write_unlock_bh(&__ip_vs_sched_lock);
- IP_VS_INFO("[%s] scheduler registered.\n", scheduler->name);
+ pr_info("[%s] scheduler registered.\n", scheduler->name);
return 0;
}
@@ -224,15 +225,15 @@
int unregister_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
{
if (!scheduler) {
- IP_VS_ERR( "unregister_ip_vs_scheduler(): NULL arg\n");
+ pr_err("%s(): NULL arg\n", __func__);
return -EINVAL;
}
write_lock_bh(&__ip_vs_sched_lock);
if (list_empty(&scheduler->n_list)) {
write_unlock_bh(&__ip_vs_sched_lock);
- IP_VS_ERR("unregister_ip_vs_scheduler(): [%s] scheduler "
- "is not in the list. failed\n", scheduler->name);
+ pr_err("%s(): [%s] scheduler is not in the list. failed\n",
+ __func__, scheduler->name);
return -EINVAL;
}
@@ -245,7 +246,7 @@
/* decrease the module use count */
ip_vs_use_count_dec();
- IP_VS_INFO("[%s] scheduler unregistered.\n", scheduler->name);
+ pr_info("[%s] scheduler unregistered.\n", scheduler->name);
return 0;
}
diff --git a/net/netfilter/ipvs/ip_vs_sed.c b/net/netfilter/ipvs/ip_vs_sed.c
index 20e4657..1ab75a9 100644
--- a/net/netfilter/ipvs/ip_vs_sed.c
+++ b/net/netfilter/ipvs/ip_vs_sed.c
@@ -35,6 +35,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
@@ -61,7 +64,7 @@
struct ip_vs_dest *dest, *least;
unsigned int loh, doh;
- IP_VS_DBG(6, "ip_vs_sed_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
/*
* We calculate the load of each dest server as follows:
diff --git a/net/netfilter/ipvs/ip_vs_sh.c b/net/netfilter/ipvs/ip_vs_sh.c
index 75709eb..8e6cfd3 100644
--- a/net/netfilter/ipvs/ip_vs_sh.c
+++ b/net/netfilter/ipvs/ip_vs_sh.c
@@ -32,6 +32,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/ip.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -144,7 +147,7 @@
tbl = kmalloc(sizeof(struct ip_vs_sh_bucket)*IP_VS_SH_TAB_SIZE,
GFP_ATOMIC);
if (tbl == NULL) {
- IP_VS_ERR("ip_vs_sh_init_svc(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return -ENOMEM;
}
svc->sched_data = tbl;
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 5c48378..e177f0d 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -17,6 +17,9 @@
* Justin Ossevoort : Fix endian problem on sync message size.
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/inetdevice.h>
@@ -243,7 +246,7 @@
if (!curr_sb) {
if (!(curr_sb=ip_vs_sync_buff_create())) {
spin_unlock(&curr_sb_lock);
- IP_VS_ERR("ip_vs_sync_buff_create failed.\n");
+ pr_err("ip_vs_sync_buff_create failed.\n");
return;
}
}
@@ -409,7 +412,7 @@
if (dest)
atomic_dec(&dest->refcnt);
if (!cp) {
- IP_VS_ERR("ip_vs_conn_new failed\n");
+ pr_err("ip_vs_conn_new failed\n");
return;
}
} else if (!cp->dest) {
@@ -577,8 +580,8 @@
addr = inet_select_addr(dev, 0, RT_SCOPE_UNIVERSE);
if (!addr)
- IP_VS_ERR("You probably need to specify IP address on "
- "multicast interface.\n");
+ pr_err("You probably need to specify IP address on "
+ "multicast interface.\n");
IP_VS_DBG(7, "binding socket with (%s) %pI4\n",
ifname, &addr);
@@ -602,13 +605,13 @@
/* First create a socket */
result = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock);
if (result < 0) {
- IP_VS_ERR("Error during creation of socket; terminating\n");
+ pr_err("Error during creation of socket; terminating\n");
return ERR_PTR(result);
}
result = set_mcast_if(sock->sk, ip_vs_master_mcast_ifn);
if (result < 0) {
- IP_VS_ERR("Error setting outbound mcast interface\n");
+ pr_err("Error setting outbound mcast interface\n");
goto error;
}
@@ -617,14 +620,14 @@
result = bind_mcastif_addr(sock, ip_vs_master_mcast_ifn);
if (result < 0) {
- IP_VS_ERR("Error binding address of the mcast interface\n");
+ pr_err("Error binding address of the mcast interface\n");
goto error;
}
result = sock->ops->connect(sock, (struct sockaddr *) &mcast_addr,
sizeof(struct sockaddr), 0);
if (result < 0) {
- IP_VS_ERR("Error connecting to the multicast addr\n");
+ pr_err("Error connecting to the multicast addr\n");
goto error;
}
@@ -647,7 +650,7 @@
/* First create a socket */
result = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock);
if (result < 0) {
- IP_VS_ERR("Error during creation of socket; terminating\n");
+ pr_err("Error during creation of socket; terminating\n");
return ERR_PTR(result);
}
@@ -657,7 +660,7 @@
result = sock->ops->bind(sock, (struct sockaddr *) &mcast_addr,
sizeof(struct sockaddr));
if (result < 0) {
- IP_VS_ERR("Error binding to the multicast addr\n");
+ pr_err("Error binding to the multicast addr\n");
goto error;
}
@@ -666,7 +669,7 @@
(struct in_addr *) &mcast_addr.sin_addr,
ip_vs_backup_mcast_ifn);
if (result < 0) {
- IP_VS_ERR("Error joining to the multicast group\n");
+ pr_err("Error joining to the multicast group\n");
goto error;
}
@@ -706,7 +709,7 @@
msg->size = htons(msg->size);
if (ip_vs_send_async(sock, (char *)msg, msize) != msize)
- IP_VS_ERR("ip_vs_send_async error\n");
+ pr_err("ip_vs_send_async error\n");
}
static int
@@ -737,9 +740,9 @@
struct ip_vs_sync_thread_data *tinfo = data;
struct ip_vs_sync_buff *sb;
- IP_VS_INFO("sync thread started: state = MASTER, mcast_ifn = %s, "
- "syncid = %d\n",
- ip_vs_master_mcast_ifn, ip_vs_master_syncid);
+ pr_info("sync thread started: state = MASTER, mcast_ifn = %s, "
+ "syncid = %d\n",
+ ip_vs_master_mcast_ifn, ip_vs_master_syncid);
while (!kthread_should_stop()) {
while ((sb = sb_dequeue())) {
@@ -780,9 +783,9 @@
struct ip_vs_sync_thread_data *tinfo = data;
int len;
- IP_VS_INFO("sync thread started: state = BACKUP, mcast_ifn = %s, "
- "syncid = %d\n",
- ip_vs_backup_mcast_ifn, ip_vs_backup_syncid);
+ pr_info("sync thread started: state = BACKUP, mcast_ifn = %s, "
+ "syncid = %d\n",
+ ip_vs_backup_mcast_ifn, ip_vs_backup_syncid);
while (!kthread_should_stop()) {
wait_event_interruptible(*tinfo->sock->sk->sk_sleep,
@@ -794,7 +797,7 @@
len = ip_vs_receive(tinfo->sock, tinfo->buf,
sync_recv_mesg_maxlen);
if (len <= 0) {
- IP_VS_ERR("receiving message error\n");
+ pr_err("receiving message error\n");
break;
}
@@ -824,7 +827,7 @@
int (*threadfn)(void *data);
int result = -ENOMEM;
- IP_VS_DBG(7, "%s: pid %d\n", __func__, task_pid_nr(current));
+ IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
IP_VS_DBG(7, "Each ip_vs_sync_conn entry needs %Zd bytes\n",
sizeof(struct ip_vs_sync_conn));
@@ -901,14 +904,14 @@
int stop_sync_thread(int state)
{
- IP_VS_DBG(7, "%s: pid %d\n", __func__, task_pid_nr(current));
+ IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
if (state == IP_VS_STATE_MASTER) {
if (!sync_master_thread)
return -ESRCH;
- IP_VS_INFO("stopping master sync thread %d ...\n",
- task_pid_nr(sync_master_thread));
+ pr_info("stopping master sync thread %d ...\n",
+ task_pid_nr(sync_master_thread));
/*
* The lock synchronizes with sb_queue_tail(), so that we don't
@@ -925,8 +928,8 @@
if (!sync_backup_thread)
return -ESRCH;
- IP_VS_INFO("stopping backup sync thread %d ...\n",
- task_pid_nr(sync_backup_thread));
+ pr_info("stopping backup sync thread %d ...\n",
+ task_pid_nr(sync_backup_thread));
ip_vs_sync_state &= ~IP_VS_STATE_BACKUP;
kthread_stop(sync_backup_thread);
diff --git a/net/netfilter/ipvs/ip_vs_wlc.c b/net/netfilter/ipvs/ip_vs_wlc.c
index 8e94256..bbddfdb 100644
--- a/net/netfilter/ipvs/ip_vs_wlc.c
+++ b/net/netfilter/ipvs/ip_vs_wlc.c
@@ -19,6 +19,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
diff --git a/net/netfilter/ipvs/ip_vs_wrr.c b/net/netfilter/ipvs/ip_vs_wrr.c
index f7d74ef..6182e8e 100644
--- a/net/netfilter/ipvs/ip_vs_wrr.c
+++ b/net/netfilter/ipvs/ip_vs_wrr.c
@@ -18,6 +18,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/net.h>
@@ -74,11 +77,12 @@
static int ip_vs_wrr_max_weight(struct ip_vs_service *svc)
{
struct ip_vs_dest *dest;
- int weight = 0;
+ int new_weight, weight = 0;
list_for_each_entry(dest, &svc->destinations, n_list) {
- if (atomic_read(&dest->weight) > weight)
- weight = atomic_read(&dest->weight);
+ new_weight = atomic_read(&dest->weight);
+ if (new_weight > weight)
+ weight = new_weight;
}
return weight;
@@ -94,7 +98,7 @@
*/
mark = kmalloc(sizeof(struct ip_vs_wrr_mark), GFP_ATOMIC);
if (mark == NULL) {
- IP_VS_ERR("ip_vs_wrr_init_svc(): no memory\n");
+ pr_err("%s(): no memory\n", __func__);
return -ENOMEM;
}
mark->cl = &svc->destinations;
@@ -141,7 +145,7 @@
struct ip_vs_wrr_mark *mark = svc->sched_data;
struct list_head *p;
- IP_VS_DBG(6, "ip_vs_wrr_schedule(): Scheduling...\n");
+ IP_VS_DBG(6, "%s(): Scheduling...\n", __func__);
/*
* This loop will always terminate, because mark->cw in (0, max_weight]
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index 5874657..30b3189 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -13,6 +13,9 @@
*
*/
+#define KMSG_COMPONENT "IPVS"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/kernel.h>
#include <linux/tcp.h> /* for tcphdr */
#include <net/ip.h>
@@ -235,8 +238,8 @@
EnterFunction(10);
if (ip_route_output_key(&init_net, &rt, &fl)) {
- IP_VS_DBG_RL("ip_vs_bypass_xmit(): ip_route_output error, dest: %pI4\n",
- &iph->daddr);
+ IP_VS_DBG_RL("%s(): ip_route_output error, dest: %pI4\n",
+ __func__, &iph->daddr);
goto tx_error_icmp;
}
@@ -245,7 +248,7 @@
if ((skb->len > mtu) && (iph->frag_off & htons(IP_DF))) {
ip_rt_put(rt);
icmp_send(skb, ICMP_DEST_UNREACH,ICMP_FRAG_NEEDED, htonl(mtu));
- IP_VS_DBG_RL("ip_vs_bypass_xmit(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -299,8 +302,8 @@
rt = (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl);
if (!rt) {
- IP_VS_DBG_RL("ip_vs_bypass_xmit_v6(): ip6_route_output error, dest: %pI6\n",
- &iph->daddr);
+ IP_VS_DBG_RL("%s(): ip6_route_output error, dest: %pI6\n",
+ __func__, &iph->daddr);
goto tx_error_icmp;
}
@@ -309,7 +312,7 @@
if (skb->len > mtu) {
dst_release(&rt->u.dst);
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
- IP_VS_DBG_RL("ip_vs_bypass_xmit_v6(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -536,9 +539,9 @@
EnterFunction(10);
if (skb->protocol != htons(ETH_P_IP)) {
- IP_VS_DBG_RL("ip_vs_tunnel_xmit(): protocol error, "
+ IP_VS_DBG_RL("%s(): protocol error, "
"ETH_P_IP: %d, skb protocol: %d\n",
- htons(ETH_P_IP), skb->protocol);
+ __func__, htons(ETH_P_IP), skb->protocol);
goto tx_error;
}
@@ -550,7 +553,7 @@
mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
if (mtu < 68) {
ip_rt_put(rt);
- IP_VS_DBG_RL("ip_vs_tunnel_xmit(): mtu less than 68\n");
+ IP_VS_DBG_RL("%s(): mtu less than 68\n", __func__);
goto tx_error;
}
if (skb_dst(skb))
@@ -562,7 +565,7 @@
&& mtu < ntohs(old_iph->tot_len)) {
icmp_send(skb, ICMP_DEST_UNREACH,ICMP_FRAG_NEEDED, htonl(mtu));
ip_rt_put(rt);
- IP_VS_DBG_RL("ip_vs_tunnel_xmit(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -578,7 +581,7 @@
if (!new_skb) {
ip_rt_put(rt);
kfree_skb(skb);
- IP_VS_ERR_RL("ip_vs_tunnel_xmit(): no memory\n");
+ IP_VS_ERR_RL("%s(): no memory\n", __func__);
return NF_STOLEN;
}
kfree_skb(skb);
@@ -646,9 +649,9 @@
EnterFunction(10);
if (skb->protocol != htons(ETH_P_IPV6)) {
- IP_VS_DBG_RL("ip_vs_tunnel_xmit_v6(): protocol error, "
+ IP_VS_DBG_RL("%s(): protocol error, "
"ETH_P_IPV6: %d, skb protocol: %d\n",
- htons(ETH_P_IPV6), skb->protocol);
+ __func__, htons(ETH_P_IPV6), skb->protocol);
goto tx_error;
}
@@ -662,7 +665,7 @@
/* TODO IPv6: do we need this check in IPv6? */
if (mtu < 1280) {
dst_release(&rt->u.dst);
- IP_VS_DBG_RL("ip_vs_tunnel_xmit_v6(): mtu less than 1280\n");
+ IP_VS_DBG_RL("%s(): mtu less than 1280\n", __func__);
goto tx_error;
}
if (skb_dst(skb))
@@ -671,7 +674,7 @@
if (mtu < ntohs(old_iph->payload_len) + sizeof(struct ipv6hdr)) {
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
dst_release(&rt->u.dst);
- IP_VS_DBG_RL("ip_vs_tunnel_xmit_v6(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -687,7 +690,7 @@
if (!new_skb) {
dst_release(&rt->u.dst);
kfree_skb(skb);
- IP_VS_ERR_RL("ip_vs_tunnel_xmit_v6(): no memory\n");
+ IP_VS_ERR_RL("%s(): no memory\n", __func__);
return NF_STOLEN;
}
kfree_skb(skb);
@@ -760,7 +763,7 @@
if ((iph->frag_off & htons(IP_DF)) && skb->len > mtu) {
icmp_send(skb, ICMP_DEST_UNREACH,ICMP_FRAG_NEEDED, htonl(mtu));
ip_rt_put(rt);
- IP_VS_DBG_RL("ip_vs_dr_xmit(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -813,7 +816,7 @@
if (skb->len > mtu) {
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
dst_release(&rt->u.dst);
- IP_VS_DBG_RL("ip_vs_dr_xmit_v6(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -888,7 +891,7 @@
if ((skb->len > mtu) && (ip_hdr(skb)->frag_off & htons(IP_DF))) {
ip_rt_put(rt);
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
- IP_VS_DBG_RL("ip_vs_in_icmp(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
@@ -963,7 +966,7 @@
if (skb->len > mtu) {
dst_release(&rt->u.dst);
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, skb->dev);
- IP_VS_DBG_RL("ip_vs_in_icmp(): frag needed\n");
+ IP_VS_DBG_RL("%s(): frag needed\n", __func__);
goto tx_error;
}
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index b5869b9..b371098 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -47,7 +47,7 @@
int (*nfnetlink_parse_nat_setup_hook)(struct nf_conn *ct,
enum nf_nat_manip_type manip,
- struct nlattr *attr) __read_mostly;
+ const struct nlattr *attr) __read_mostly;
EXPORT_SYMBOL_GPL(nfnetlink_parse_nat_setup_hook);
DEFINE_SPINLOCK(nf_conntrack_lock);
@@ -1089,14 +1089,14 @@
}
EXPORT_SYMBOL_GPL(nf_conntrack_flush_report);
-static void nf_ct_release_dying_list(void)
+static void nf_ct_release_dying_list(struct net *net)
{
struct nf_conntrack_tuple_hash *h;
struct nf_conn *ct;
struct hlist_nulls_node *n;
spin_lock_bh(&nf_conntrack_lock);
- hlist_nulls_for_each_entry(h, n, &init_net.ct.dying, hnnode) {
+ hlist_nulls_for_each_entry(h, n, &net->ct.dying, hnnode) {
ct = nf_ct_tuplehash_to_ctrack(h);
/* never fails to remove them, no listeners at this point */
nf_ct_kill(ct);
@@ -1115,7 +1115,7 @@
{
i_see_dead_people:
nf_ct_iterate_cleanup(net, kill_all, NULL);
- nf_ct_release_dying_list();
+ nf_ct_release_dying_list(net);
if (atomic_read(&net->ct.count) != 0) {
schedule();
goto i_see_dead_people;
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 49479d1..59d8064 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -704,7 +704,8 @@
}
static int
-ctnetlink_parse_tuple(struct nlattr *cda[], struct nf_conntrack_tuple *tuple,
+ctnetlink_parse_tuple(const struct nlattr * const cda[],
+ struct nf_conntrack_tuple *tuple,
enum ctattr_tuple type, u_int8_t l3num)
{
struct nlattr *tb[CTA_TUPLE_MAX+1];
@@ -740,7 +741,7 @@
}
static inline int
-ctnetlink_parse_help(struct nlattr *attr, char **helper_name)
+ctnetlink_parse_help(const struct nlattr *attr, char **helper_name)
{
struct nlattr *tb[CTA_HELP_MAX+1];
@@ -764,7 +765,8 @@
static int
ctnetlink_del_conntrack(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[])
{
struct nf_conntrack_tuple_hash *h;
struct nf_conntrack_tuple tuple;
@@ -823,7 +825,8 @@
static int
ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[])
{
struct nf_conntrack_tuple_hash *h;
struct nf_conntrack_tuple tuple;
@@ -884,7 +887,7 @@
static int
ctnetlink_parse_nat_setup(struct nf_conn *ct,
enum nf_nat_manip_type manip,
- struct nlattr *attr)
+ const struct nlattr *attr)
{
typeof(nfnetlink_parse_nat_setup_hook) parse_nat_setup;
@@ -914,7 +917,7 @@
#endif
static int
-ctnetlink_change_status(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_status(struct nf_conn *ct, const struct nlattr * const cda[])
{
unsigned long d;
unsigned int status = ntohl(nla_get_be32(cda[CTA_STATUS]));
@@ -940,7 +943,7 @@
}
static int
-ctnetlink_change_nat(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_nat(struct nf_conn *ct, const struct nlattr * const cda[])
{
#ifdef CONFIG_NF_NAT_NEEDED
int ret;
@@ -966,7 +969,7 @@
}
static inline int
-ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_helper(struct nf_conn *ct, const struct nlattr * const cda[])
{
struct nf_conntrack_helper *helper;
struct nf_conn_help *help = nfct_help(ct);
@@ -1028,7 +1031,7 @@
}
static inline int
-ctnetlink_change_timeout(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_timeout(struct nf_conn *ct, const struct nlattr * const cda[])
{
u_int32_t timeout = ntohl(nla_get_be32(cda[CTA_TIMEOUT]));
@@ -1042,9 +1045,10 @@
}
static inline int
-ctnetlink_change_protoinfo(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_protoinfo(struct nf_conn *ct, const struct nlattr * const cda[])
{
- struct nlattr *tb[CTA_PROTOINFO_MAX+1], *attr = cda[CTA_PROTOINFO];
+ const struct nlattr *attr = cda[CTA_PROTOINFO];
+ struct nlattr *tb[CTA_PROTOINFO_MAX+1];
struct nf_conntrack_l4proto *l4proto;
int err = 0;
@@ -1061,7 +1065,7 @@
#ifdef CONFIG_NF_NAT_NEEDED
static inline int
-change_nat_seq_adj(struct nf_nat_seq *natseq, struct nlattr *attr)
+change_nat_seq_adj(struct nf_nat_seq *natseq, const struct nlattr * const attr)
{
struct nlattr *cda[CTA_NAT_SEQ_MAX+1];
@@ -1089,7 +1093,8 @@
}
static int
-ctnetlink_change_nat_seq_adj(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_nat_seq_adj(struct nf_conn *ct,
+ const struct nlattr * const cda[])
{
int ret = 0;
struct nf_conn_nat *nat = nfct_nat(ct);
@@ -1120,7 +1125,8 @@
#endif
static int
-ctnetlink_change_conntrack(struct nf_conn *ct, struct nlattr *cda[])
+ctnetlink_change_conntrack(struct nf_conn *ct,
+ const struct nlattr * const cda[])
{
int err;
@@ -1169,7 +1175,7 @@
}
static struct nf_conn *
-ctnetlink_create_conntrack(struct nlattr *cda[],
+ctnetlink_create_conntrack(const struct nlattr * const cda[],
struct nf_conntrack_tuple *otuple,
struct nf_conntrack_tuple *rtuple,
u8 u3)
@@ -1304,7 +1310,8 @@
static int
ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[])
{
struct nf_conntrack_tuple otuple, rtuple;
struct nf_conntrack_tuple_hash *h = NULL;
@@ -1629,7 +1636,8 @@
static int
ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[])
{
struct nf_conntrack_tuple tuple;
struct nf_conntrack_expect *exp;
@@ -1689,7 +1697,8 @@
static int
ctnetlink_del_expect(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[])
{
struct nf_conntrack_expect *exp;
struct nf_conntrack_tuple tuple;
@@ -1767,13 +1776,15 @@
return 0;
}
static int
-ctnetlink_change_expect(struct nf_conntrack_expect *x, struct nlattr *cda[])
+ctnetlink_change_expect(struct nf_conntrack_expect *x,
+ const struct nlattr * const cda[])
{
return -EOPNOTSUPP;
}
static int
-ctnetlink_create_expect(struct nlattr *cda[], u_int8_t u3, u32 pid, int report)
+ctnetlink_create_expect(const struct nlattr * const cda[], u_int8_t u3,
+ u32 pid, int report)
{
struct nf_conntrack_tuple tuple, mask, master_tuple;
struct nf_conntrack_tuple_hash *h = NULL;
@@ -1831,7 +1842,8 @@
static int
ctnetlink_new_expect(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *cda[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const cda[])
{
struct nf_conntrack_tuple tuple;
struct nf_conntrack_expect *exp;
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 92761a9..eedc0c1 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -170,7 +170,7 @@
if (err < 0)
return err;
- err = nc->call(nfnl, skb, nlh, cda);
+ err = nc->call(nfnl, skb, nlh, (const struct nlattr **)cda);
if (err == -EAGAIN)
goto replay;
return err;
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 66a6dd5..f900dc3 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -694,7 +694,8 @@
static int
nfulnl_recv_unsupp(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *nfqa[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const nfqa[])
{
return -ENOTSUPP;
}
@@ -716,7 +717,8 @@
static int
nfulnl_recv_config(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *nfula[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const nfula[])
{
struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
u_int16_t group_num = ntohs(nfmsg->res_id);
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 71daa09..7a9dec9 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -608,7 +608,8 @@
static int
nfqnl_recv_verdict(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *nfqa[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const nfqa[])
{
struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
u_int16_t queue_num = ntohs(nfmsg->res_id);
@@ -670,7 +671,8 @@
static int
nfqnl_recv_unsupp(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *nfqa[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const nfqa[])
{
return -ENOTSUPP;
}
@@ -687,7 +689,8 @@
static int
nfqnl_recv_config(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *nfqa[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const nfqa[])
{
struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
u_int16_t queue_num = ntohs(nfmsg->res_id);
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 025d1a0..a6ac83a 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -736,16 +736,17 @@
}
EXPORT_SYMBOL_GPL(xt_replace_table);
-struct xt_table *xt_register_table(struct net *net, struct xt_table *table,
+struct xt_table *xt_register_table(struct net *net,
+ const struct xt_table *input_table,
struct xt_table_info *bootstrap,
struct xt_table_info *newinfo)
{
int ret;
struct xt_table_info *private;
- struct xt_table *t;
+ struct xt_table *t, *table;
/* Don't add one object to multiple lists. */
- table = kmemdup(table, sizeof(struct xt_table), GFP_KERNEL);
+ table = kmemdup(input_table, sizeof(struct xt_table), GFP_KERNEL);
if (!table) {
ret = -ENOMEM;
goto out;
diff --git a/net/netfilter/xt_CONNMARK.c b/net/netfilter/xt_CONNMARK.c
index d6e5ab4..5934570 100644
--- a/net/netfilter/xt_CONNMARK.c
+++ b/net/netfilter/xt_CONNMARK.c
@@ -36,45 +36,6 @@
#include <net/netfilter/nf_conntrack_ecache.h>
static unsigned int
-connmark_tg_v0(struct sk_buff *skb, const struct xt_target_param *par)
-{
- const struct xt_connmark_target_info *markinfo = par->targinfo;
- struct nf_conn *ct;
- enum ip_conntrack_info ctinfo;
- u_int32_t diff;
- u_int32_t mark;
- u_int32_t newmark;
-
- ct = nf_ct_get(skb, &ctinfo);
- if (ct) {
- switch(markinfo->mode) {
- case XT_CONNMARK_SET:
- newmark = (ct->mark & ~markinfo->mask) | markinfo->mark;
- if (newmark != ct->mark) {
- ct->mark = newmark;
- nf_conntrack_event_cache(IPCT_MARK, ct);
- }
- break;
- case XT_CONNMARK_SAVE:
- newmark = (ct->mark & ~markinfo->mask) |
- (skb->mark & markinfo->mask);
- if (ct->mark != newmark) {
- ct->mark = newmark;
- nf_conntrack_event_cache(IPCT_MARK, ct);
- }
- break;
- case XT_CONNMARK_RESTORE:
- mark = skb->mark;
- diff = (ct->mark ^ mark) & markinfo->mask;
- skb->mark = mark ^ diff;
- break;
- }
- }
-
- return XT_CONTINUE;
-}
-
-static unsigned int
connmark_tg(struct sk_buff *skb, const struct xt_target_param *par)
{
const struct xt_connmark_tginfo1 *info = par->targinfo;
@@ -112,30 +73,6 @@
return XT_CONTINUE;
}
-static bool connmark_tg_check_v0(const struct xt_tgchk_param *par)
-{
- const struct xt_connmark_target_info *matchinfo = par->targinfo;
-
- if (matchinfo->mode == XT_CONNMARK_RESTORE) {
- if (strcmp(par->table, "mangle") != 0) {
- printk(KERN_WARNING "CONNMARK: restore can only be "
- "called from \"mangle\" table, not \"%s\"\n",
- par->table);
- return false;
- }
- }
- if (matchinfo->mark > 0xffffffff || matchinfo->mask > 0xffffffff) {
- printk(KERN_WARNING "CONNMARK: Only supports 32bit mark\n");
- return false;
- }
- if (nf_ct_l3proto_try_module_get(par->family) < 0) {
- printk(KERN_WARNING "can't load conntrack support for "
- "proto=%u\n", par->family);
- return false;
- }
- return true;
-}
-
static bool connmark_tg_check(const struct xt_tgchk_param *par)
{
if (nf_ct_l3proto_try_module_get(par->family) < 0) {
@@ -151,74 +88,25 @@
nf_ct_l3proto_module_put(par->family);
}
-#ifdef CONFIG_COMPAT
-struct compat_xt_connmark_target_info {
- compat_ulong_t mark, mask;
- u_int8_t mode;
- u_int8_t __pad1;
- u_int16_t __pad2;
-};
-
-static void connmark_tg_compat_from_user_v0(void *dst, void *src)
-{
- const struct compat_xt_connmark_target_info *cm = src;
- struct xt_connmark_target_info m = {
- .mark = cm->mark,
- .mask = cm->mask,
- .mode = cm->mode,
- };
- memcpy(dst, &m, sizeof(m));
-}
-
-static int connmark_tg_compat_to_user_v0(void __user *dst, void *src)
-{
- const struct xt_connmark_target_info *m = src;
- struct compat_xt_connmark_target_info cm = {
- .mark = m->mark,
- .mask = m->mask,
- .mode = m->mode,
- };
- return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
-}
-#endif /* CONFIG_COMPAT */
-
-static struct xt_target connmark_tg_reg[] __read_mostly = {
- {
- .name = "CONNMARK",
- .revision = 0,
- .family = NFPROTO_UNSPEC,
- .checkentry = connmark_tg_check_v0,
- .destroy = connmark_tg_destroy,
- .target = connmark_tg_v0,
- .targetsize = sizeof(struct xt_connmark_target_info),
-#ifdef CONFIG_COMPAT
- .compatsize = sizeof(struct compat_xt_connmark_target_info),
- .compat_from_user = connmark_tg_compat_from_user_v0,
- .compat_to_user = connmark_tg_compat_to_user_v0,
-#endif
- .me = THIS_MODULE
- },
- {
- .name = "CONNMARK",
- .revision = 1,
- .family = NFPROTO_UNSPEC,
- .checkentry = connmark_tg_check,
- .target = connmark_tg,
- .targetsize = sizeof(struct xt_connmark_tginfo1),
- .destroy = connmark_tg_destroy,
- .me = THIS_MODULE,
- },
+static struct xt_target connmark_tg_reg __read_mostly = {
+ .name = "CONNMARK",
+ .revision = 1,
+ .family = NFPROTO_UNSPEC,
+ .checkentry = connmark_tg_check,
+ .target = connmark_tg,
+ .targetsize = sizeof(struct xt_connmark_tginfo1),
+ .destroy = connmark_tg_destroy,
+ .me = THIS_MODULE,
};
static int __init connmark_tg_init(void)
{
- return xt_register_targets(connmark_tg_reg,
- ARRAY_SIZE(connmark_tg_reg));
+ return xt_register_target(&connmark_tg_reg);
}
static void __exit connmark_tg_exit(void)
{
- xt_unregister_targets(connmark_tg_reg, ARRAY_SIZE(connmark_tg_reg));
+ xt_unregister_target(&connmark_tg_reg);
}
module_init(connmark_tg_init);
diff --git a/net/netfilter/xt_DSCP.c b/net/netfilter/xt_DSCP.c
index 6a347e7..74ce892 100644
--- a/net/netfilter/xt_DSCP.c
+++ b/net/netfilter/xt_DSCP.c
@@ -18,7 +18,6 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_DSCP.h>
-#include <linux/netfilter_ipv4/ipt_TOS.h>
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("Xtables: DSCP/TOS field modification");
@@ -73,41 +72,6 @@
}
static unsigned int
-tos_tg_v0(struct sk_buff *skb, const struct xt_target_param *par)
-{
- const struct ipt_tos_target_info *info = par->targinfo;
- struct iphdr *iph = ip_hdr(skb);
- u_int8_t oldtos;
-
- if ((iph->tos & IPTOS_TOS_MASK) != info->tos) {
- if (!skb_make_writable(skb, sizeof(struct iphdr)))
- return NF_DROP;
-
- iph = ip_hdr(skb);
- oldtos = iph->tos;
- iph->tos = (iph->tos & IPTOS_PREC_MASK) | info->tos;
- csum_replace2(&iph->check, htons(oldtos), htons(iph->tos));
- }
-
- return XT_CONTINUE;
-}
-
-static bool tos_tg_check_v0(const struct xt_tgchk_param *par)
-{
- const struct ipt_tos_target_info *info = par->targinfo;
- const uint8_t tos = info->tos;
-
- if (tos != IPTOS_LOWDELAY && tos != IPTOS_THROUGHPUT &&
- tos != IPTOS_RELIABILITY && tos != IPTOS_MINCOST &&
- tos != IPTOS_NORMALSVC) {
- printk(KERN_WARNING "TOS: bad tos value %#x\n", tos);
- return false;
- }
-
- return true;
-}
-
-static unsigned int
tos_tg(struct sk_buff *skb, const struct xt_target_param *par)
{
const struct xt_tos_target_info *info = par->targinfo;
@@ -168,16 +132,6 @@
},
{
.name = "TOS",
- .revision = 0,
- .family = NFPROTO_IPV4,
- .table = "mangle",
- .target = tos_tg_v0,
- .targetsize = sizeof(struct ipt_tos_target_info),
- .checkentry = tos_tg_check_v0,
- .me = THIS_MODULE,
- },
- {
- .name = "TOS",
.revision = 1,
.family = NFPROTO_IPV4,
.table = "mangle",
diff --git a/net/netfilter/xt_MARK.c b/net/netfilter/xt_MARK.c
index 67574bc..225f8d1 100644
--- a/net/netfilter/xt_MARK.c
+++ b/net/netfilter/xt_MARK.c
@@ -25,39 +25,6 @@
MODULE_ALIAS("ip6t_MARK");
static unsigned int
-mark_tg_v0(struct sk_buff *skb, const struct xt_target_param *par)
-{
- const struct xt_mark_target_info *markinfo = par->targinfo;
-
- skb->mark = markinfo->mark;
- return XT_CONTINUE;
-}
-
-static unsigned int
-mark_tg_v1(struct sk_buff *skb, const struct xt_target_param *par)
-{
- const struct xt_mark_target_info_v1 *markinfo = par->targinfo;
- int mark = 0;
-
- switch (markinfo->mode) {
- case XT_MARK_SET:
- mark = markinfo->mark;
- break;
-
- case XT_MARK_AND:
- mark = skb->mark & markinfo->mark;
- break;
-
- case XT_MARK_OR:
- mark = skb->mark | markinfo->mark;
- break;
- }
-
- skb->mark = mark;
- return XT_CONTINUE;
-}
-
-static unsigned int
mark_tg(struct sk_buff *skb, const struct xt_target_param *par)
{
const struct xt_mark_tginfo2 *info = par->targinfo;
@@ -66,135 +33,23 @@
return XT_CONTINUE;
}
-static bool mark_tg_check_v0(const struct xt_tgchk_param *par)
-{
- const struct xt_mark_target_info *markinfo = par->targinfo;
-
- if (markinfo->mark > 0xffffffff) {
- printk(KERN_WARNING "MARK: Only supports 32bit wide mark\n");
- return false;
- }
- return true;
-}
-
-static bool mark_tg_check_v1(const struct xt_tgchk_param *par)
-{
- const struct xt_mark_target_info_v1 *markinfo = par->targinfo;
-
- if (markinfo->mode != XT_MARK_SET
- && markinfo->mode != XT_MARK_AND
- && markinfo->mode != XT_MARK_OR) {
- printk(KERN_WARNING "MARK: unknown mode %u\n",
- markinfo->mode);
- return false;
- }
- if (markinfo->mark > 0xffffffff) {
- printk(KERN_WARNING "MARK: Only supports 32bit wide mark\n");
- return false;
- }
- return true;
-}
-
-#ifdef CONFIG_COMPAT
-struct compat_xt_mark_target_info {
- compat_ulong_t mark;
-};
-
-static void mark_tg_compat_from_user_v0(void *dst, void *src)
-{
- const struct compat_xt_mark_target_info *cm = src;
- struct xt_mark_target_info m = {
- .mark = cm->mark,
- };
- memcpy(dst, &m, sizeof(m));
-}
-
-static int mark_tg_compat_to_user_v0(void __user *dst, void *src)
-{
- const struct xt_mark_target_info *m = src;
- struct compat_xt_mark_target_info cm = {
- .mark = m->mark,
- };
- return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
-}
-
-struct compat_xt_mark_target_info_v1 {
- compat_ulong_t mark;
- u_int8_t mode;
- u_int8_t __pad1;
- u_int16_t __pad2;
-};
-
-static void mark_tg_compat_from_user_v1(void *dst, void *src)
-{
- const struct compat_xt_mark_target_info_v1 *cm = src;
- struct xt_mark_target_info_v1 m = {
- .mark = cm->mark,
- .mode = cm->mode,
- };
- memcpy(dst, &m, sizeof(m));
-}
-
-static int mark_tg_compat_to_user_v1(void __user *dst, void *src)
-{
- const struct xt_mark_target_info_v1 *m = src;
- struct compat_xt_mark_target_info_v1 cm = {
- .mark = m->mark,
- .mode = m->mode,
- };
- return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
-}
-#endif /* CONFIG_COMPAT */
-
-static struct xt_target mark_tg_reg[] __read_mostly = {
- {
- .name = "MARK",
- .family = NFPROTO_UNSPEC,
- .revision = 0,
- .checkentry = mark_tg_check_v0,
- .target = mark_tg_v0,
- .targetsize = sizeof(struct xt_mark_target_info),
-#ifdef CONFIG_COMPAT
- .compatsize = sizeof(struct compat_xt_mark_target_info),
- .compat_from_user = mark_tg_compat_from_user_v0,
- .compat_to_user = mark_tg_compat_to_user_v0,
-#endif
- .table = "mangle",
- .me = THIS_MODULE,
- },
- {
- .name = "MARK",
- .family = NFPROTO_UNSPEC,
- .revision = 1,
- .checkentry = mark_tg_check_v1,
- .target = mark_tg_v1,
- .targetsize = sizeof(struct xt_mark_target_info_v1),
-#ifdef CONFIG_COMPAT
- .compatsize = sizeof(struct compat_xt_mark_target_info_v1),
- .compat_from_user = mark_tg_compat_from_user_v1,
- .compat_to_user = mark_tg_compat_to_user_v1,
-#endif
- .table = "mangle",
- .me = THIS_MODULE,
- },
- {
- .name = "MARK",
- .revision = 2,
- .family = NFPROTO_UNSPEC,
- .target = mark_tg,
- .targetsize = sizeof(struct xt_mark_tginfo2),
- .me = THIS_MODULE,
- },
+static struct xt_target mark_tg_reg __read_mostly = {
+ .name = "MARK",
+ .revision = 2,
+ .family = NFPROTO_UNSPEC,
+ .target = mark_tg,
+ .targetsize = sizeof(struct xt_mark_tginfo2),
+ .me = THIS_MODULE,
};
static int __init mark_tg_init(void)
{
- return xt_register_targets(mark_tg_reg, ARRAY_SIZE(mark_tg_reg));
+ return xt_register_target(&mark_tg_reg);
}
static void __exit mark_tg_exit(void)
{
- xt_unregister_targets(mark_tg_reg, ARRAY_SIZE(mark_tg_reg));
+ xt_unregister_target(&mark_tg_reg);
}
module_init(mark_tg_init);
diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c
index 86cacab..122aa8b 100644
--- a/net/netfilter/xt_connmark.c
+++ b/net/netfilter/xt_connmark.c
@@ -47,36 +47,6 @@
return ((ct->mark & info->mask) == info->mark) ^ info->invert;
}
-static bool
-connmark_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct xt_connmark_info *info = par->matchinfo;
- const struct nf_conn *ct;
- enum ip_conntrack_info ctinfo;
-
- ct = nf_ct_get(skb, &ctinfo);
- if (!ct)
- return false;
-
- return ((ct->mark & info->mask) == info->mark) ^ info->invert;
-}
-
-static bool connmark_mt_check_v0(const struct xt_mtchk_param *par)
-{
- const struct xt_connmark_info *cm = par->matchinfo;
-
- if (cm->mark > 0xffffffff || cm->mask > 0xffffffff) {
- printk(KERN_WARNING "connmark: only support 32bit mark\n");
- return false;
- }
- if (nf_ct_l3proto_try_module_get(par->family) < 0) {
- printk(KERN_WARNING "can't load conntrack support for "
- "proto=%u\n", par->family);
- return false;
- }
- return true;
-}
-
static bool connmark_mt_check(const struct xt_mtchk_param *par)
{
if (nf_ct_l3proto_try_module_get(par->family) < 0) {
@@ -92,74 +62,25 @@
nf_ct_l3proto_module_put(par->family);
}
-#ifdef CONFIG_COMPAT
-struct compat_xt_connmark_info {
- compat_ulong_t mark, mask;
- u_int8_t invert;
- u_int8_t __pad1;
- u_int16_t __pad2;
-};
-
-static void connmark_mt_compat_from_user_v0(void *dst, void *src)
-{
- const struct compat_xt_connmark_info *cm = src;
- struct xt_connmark_info m = {
- .mark = cm->mark,
- .mask = cm->mask,
- .invert = cm->invert,
- };
- memcpy(dst, &m, sizeof(m));
-}
-
-static int connmark_mt_compat_to_user_v0(void __user *dst, void *src)
-{
- const struct xt_connmark_info *m = src;
- struct compat_xt_connmark_info cm = {
- .mark = m->mark,
- .mask = m->mask,
- .invert = m->invert,
- };
- return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
-}
-#endif /* CONFIG_COMPAT */
-
-static struct xt_match connmark_mt_reg[] __read_mostly = {
- {
- .name = "connmark",
- .revision = 0,
- .family = NFPROTO_UNSPEC,
- .checkentry = connmark_mt_check_v0,
- .match = connmark_mt_v0,
- .destroy = connmark_mt_destroy,
- .matchsize = sizeof(struct xt_connmark_info),
-#ifdef CONFIG_COMPAT
- .compatsize = sizeof(struct compat_xt_connmark_info),
- .compat_from_user = connmark_mt_compat_from_user_v0,
- .compat_to_user = connmark_mt_compat_to_user_v0,
-#endif
- .me = THIS_MODULE
- },
- {
- .name = "connmark",
- .revision = 1,
- .family = NFPROTO_UNSPEC,
- .checkentry = connmark_mt_check,
- .match = connmark_mt,
- .matchsize = sizeof(struct xt_connmark_mtinfo1),
- .destroy = connmark_mt_destroy,
- .me = THIS_MODULE,
- },
+static struct xt_match connmark_mt_reg __read_mostly = {
+ .name = "connmark",
+ .revision = 1,
+ .family = NFPROTO_UNSPEC,
+ .checkentry = connmark_mt_check,
+ .match = connmark_mt,
+ .matchsize = sizeof(struct xt_connmark_mtinfo1),
+ .destroy = connmark_mt_destroy,
+ .me = THIS_MODULE,
};
static int __init connmark_mt_init(void)
{
- return xt_register_matches(connmark_mt_reg,
- ARRAY_SIZE(connmark_mt_reg));
+ return xt_register_match(&connmark_mt_reg);
}
static void __exit connmark_mt_exit(void)
{
- xt_unregister_matches(connmark_mt_reg, ARRAY_SIZE(connmark_mt_reg));
+ xt_unregister_match(&connmark_mt_reg);
}
module_init(connmark_mt_init);
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index fc58180..6dc4652 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -19,101 +19,12 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Marc Boucher <marc@mbsi.ca>");
-MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@medozas.de>");
MODULE_DESCRIPTION("Xtables: connection tracking state match");
MODULE_ALIAS("ipt_conntrack");
MODULE_ALIAS("ip6t_conntrack");
static bool
-conntrack_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct xt_conntrack_info *sinfo = par->matchinfo;
- const struct nf_conn *ct;
- enum ip_conntrack_info ctinfo;
- unsigned int statebit;
-
- ct = nf_ct_get(skb, &ctinfo);
-
-#define FWINV(bool, invflg) ((bool) ^ !!(sinfo->invflags & (invflg)))
-
- if (ct == &nf_conntrack_untracked)
- statebit = XT_CONNTRACK_STATE_UNTRACKED;
- else if (ct)
- statebit = XT_CONNTRACK_STATE_BIT(ctinfo);
- else
- statebit = XT_CONNTRACK_STATE_INVALID;
-
- if (sinfo->flags & XT_CONNTRACK_STATE) {
- if (ct) {
- if (test_bit(IPS_SRC_NAT_BIT, &ct->status))
- statebit |= XT_CONNTRACK_STATE_SNAT;
- if (test_bit(IPS_DST_NAT_BIT, &ct->status))
- statebit |= XT_CONNTRACK_STATE_DNAT;
- }
- if (FWINV((statebit & sinfo->statemask) == 0,
- XT_CONNTRACK_STATE))
- return false;
- }
-
- if (ct == NULL) {
- if (sinfo->flags & ~XT_CONNTRACK_STATE)
- return false;
- return true;
- }
-
- if (sinfo->flags & XT_CONNTRACK_PROTO &&
- FWINV(nf_ct_protonum(ct) !=
- sinfo->tuple[IP_CT_DIR_ORIGINAL].dst.protonum,
- XT_CONNTRACK_PROTO))
- return false;
-
- if (sinfo->flags & XT_CONNTRACK_ORIGSRC &&
- FWINV((ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip &
- sinfo->sipmsk[IP_CT_DIR_ORIGINAL].s_addr) !=
- sinfo->tuple[IP_CT_DIR_ORIGINAL].src.ip,
- XT_CONNTRACK_ORIGSRC))
- return false;
-
- if (sinfo->flags & XT_CONNTRACK_ORIGDST &&
- FWINV((ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip &
- sinfo->dipmsk[IP_CT_DIR_ORIGINAL].s_addr) !=
- sinfo->tuple[IP_CT_DIR_ORIGINAL].dst.ip,
- XT_CONNTRACK_ORIGDST))
- return false;
-
- if (sinfo->flags & XT_CONNTRACK_REPLSRC &&
- FWINV((ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip &
- sinfo->sipmsk[IP_CT_DIR_REPLY].s_addr) !=
- sinfo->tuple[IP_CT_DIR_REPLY].src.ip,
- XT_CONNTRACK_REPLSRC))
- return false;
-
- if (sinfo->flags & XT_CONNTRACK_REPLDST &&
- FWINV((ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip &
- sinfo->dipmsk[IP_CT_DIR_REPLY].s_addr) !=
- sinfo->tuple[IP_CT_DIR_REPLY].dst.ip,
- XT_CONNTRACK_REPLDST))
- return false;
-
- if (sinfo->flags & XT_CONNTRACK_STATUS &&
- FWINV((ct->status & sinfo->statusmask) == 0,
- XT_CONNTRACK_STATUS))
- return false;
-
- if(sinfo->flags & XT_CONNTRACK_EXPIRES) {
- unsigned long expires = timer_pending(&ct->timeout) ?
- (ct->timeout.expires - jiffies)/HZ : 0;
-
- if (FWINV(!(expires >= sinfo->expires_min &&
- expires <= sinfo->expires_max),
- XT_CONNTRACK_EXPIRES))
- return false;
- }
- return true;
-#undef FWINV
-}
-
-static bool
conntrack_addrcmp(const union nf_inet_addr *kaddr,
const union nf_inet_addr *uaddr,
const union nf_inet_addr *umask, unsigned int l3proto)
@@ -337,73 +248,9 @@
conntrack_mt_destroy(par);
}
-#ifdef CONFIG_COMPAT
-struct compat_xt_conntrack_info
-{
- compat_uint_t statemask;
- compat_uint_t statusmask;
- struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX];
- struct in_addr sipmsk[IP_CT_DIR_MAX];
- struct in_addr dipmsk[IP_CT_DIR_MAX];
- compat_ulong_t expires_min;
- compat_ulong_t expires_max;
- u_int8_t flags;
- u_int8_t invflags;
-};
-
-static void conntrack_mt_compat_from_user_v0(void *dst, void *src)
-{
- const struct compat_xt_conntrack_info *cm = src;
- struct xt_conntrack_info m = {
- .statemask = cm->statemask,
- .statusmask = cm->statusmask,
- .expires_min = cm->expires_min,
- .expires_max = cm->expires_max,
- .flags = cm->flags,
- .invflags = cm->invflags,
- };
- memcpy(m.tuple, cm->tuple, sizeof(m.tuple));
- memcpy(m.sipmsk, cm->sipmsk, sizeof(m.sipmsk));
- memcpy(m.dipmsk, cm->dipmsk, sizeof(m.dipmsk));
- memcpy(dst, &m, sizeof(m));
-}
-
-static int conntrack_mt_compat_to_user_v0(void __user *dst, void *src)
-{
- const struct xt_conntrack_info *m = src;
- struct compat_xt_conntrack_info cm = {
- .statemask = m->statemask,
- .statusmask = m->statusmask,
- .expires_min = m->expires_min,
- .expires_max = m->expires_max,
- .flags = m->flags,
- .invflags = m->invflags,
- };
- memcpy(cm.tuple, m->tuple, sizeof(cm.tuple));
- memcpy(cm.sipmsk, m->sipmsk, sizeof(cm.sipmsk));
- memcpy(cm.dipmsk, m->dipmsk, sizeof(cm.dipmsk));
- return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
-}
-#endif
-
static struct xt_match conntrack_mt_reg[] __read_mostly = {
{
.name = "conntrack",
- .revision = 0,
- .family = NFPROTO_IPV4,
- .match = conntrack_mt_v0,
- .checkentry = conntrack_mt_check,
- .destroy = conntrack_mt_destroy,
- .matchsize = sizeof(struct xt_conntrack_info),
- .me = THIS_MODULE,
-#ifdef CONFIG_COMPAT
- .compatsize = sizeof(struct compat_xt_conntrack_info),
- .compat_from_user = conntrack_mt_compat_from_user_v0,
- .compat_to_user = conntrack_mt_compat_to_user_v0,
-#endif
- },
- {
- .name = "conntrack",
.revision = 1,
.family = NFPROTO_UNSPEC,
.matchsize = sizeof(struct xt_conntrack_mtinfo1),
diff --git a/net/netfilter/xt_dscp.c b/net/netfilter/xt_dscp.c
index c3f8085..0280d3a 100644
--- a/net/netfilter/xt_dscp.c
+++ b/net/netfilter/xt_dscp.c
@@ -15,7 +15,6 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_dscp.h>
-#include <linux/netfilter_ipv4/ipt_tos.h>
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("Xtables: DSCP/TOS field match");
@@ -55,14 +54,6 @@
return true;
}
-static bool
-tos_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct ipt_tos_info *info = par->matchinfo;
-
- return (ip_hdr(skb)->tos == info->tos) ^ info->invert;
-}
-
static bool tos_mt(const struct sk_buff *skb, const struct xt_match_param *par)
{
const struct xt_tos_match_info *info = par->matchinfo;
@@ -94,14 +85,6 @@
},
{
.name = "tos",
- .revision = 0,
- .family = NFPROTO_IPV4,
- .match = tos_mt_v0,
- .matchsize = sizeof(struct ipt_tos_info),
- .me = THIS_MODULE,
- },
- {
- .name = "tos",
.revision = 1,
.family = NFPROTO_IPV4,
.match = tos_mt,
diff --git a/net/netfilter/xt_iprange.c b/net/netfilter/xt_iprange.c
index 501f9b6..ffc9638 100644
--- a/net/netfilter/xt_iprange.c
+++ b/net/netfilter/xt_iprange.c
@@ -14,40 +14,6 @@
#include <linux/ipv6.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_iprange.h>
-#include <linux/netfilter_ipv4/ipt_iprange.h>
-
-static bool
-iprange_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct ipt_iprange_info *info = par->matchinfo;
- const struct iphdr *iph = ip_hdr(skb);
-
- if (info->flags & IPRANGE_SRC) {
- if ((ntohl(iph->saddr) < ntohl(info->src.min_ip)
- || ntohl(iph->saddr) > ntohl(info->src.max_ip))
- ^ !!(info->flags & IPRANGE_SRC_INV)) {
- pr_debug("src IP %pI4 NOT in range %s%pI4-%pI4\n",
- &iph->saddr,
- info->flags & IPRANGE_SRC_INV ? "(INV) " : "",
- &info->src.min_ip,
- &info->src.max_ip);
- return false;
- }
- }
- if (info->flags & IPRANGE_DST) {
- if ((ntohl(iph->daddr) < ntohl(info->dst.min_ip)
- || ntohl(iph->daddr) > ntohl(info->dst.max_ip))
- ^ !!(info->flags & IPRANGE_DST_INV)) {
- pr_debug("dst IP %pI4 NOT in range %s%pI4-%pI4\n",
- &iph->daddr,
- info->flags & IPRANGE_DST_INV ? "(INV) " : "",
- &info->dst.min_ip,
- &info->dst.max_ip);
- return false;
- }
- }
- return true;
-}
static bool
iprange_mt4(const struct sk_buff *skb, const struct xt_match_param *par)
@@ -127,14 +93,6 @@
static struct xt_match iprange_mt_reg[] __read_mostly = {
{
.name = "iprange",
- .revision = 0,
- .family = NFPROTO_IPV4,
- .match = iprange_mt_v0,
- .matchsize = sizeof(struct ipt_iprange_info),
- .me = THIS_MODULE,
- },
- {
- .name = "iprange",
.revision = 1,
.family = NFPROTO_IPV4,
.match = iprange_mt4,
@@ -164,7 +122,8 @@
module_init(iprange_mt_init);
module_exit(iprange_mt_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>, Jan Engelhardt <jengelh@computergmbh.de>");
+MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@medozas.de>");
MODULE_DESCRIPTION("Xtables: arbitrary IPv4 range matching");
MODULE_ALIAS("ipt_iprange");
MODULE_ALIAS("ip6t_iprange");
diff --git a/net/netfilter/xt_mark.c b/net/netfilter/xt_mark.c
index 10b9e34..1db07d8 100644
--- a/net/netfilter/xt_mark.c
+++ b/net/netfilter/xt_mark.c
@@ -3,7 +3,7 @@
*
* (C) 1999-2001 Marc Boucher <marc@mbsi.ca>
* Copyright © CC Computer Consultants GmbH, 2007 - 2008
- * Jan Engelhardt <jengelh@computergmbh.de>
+ * Jan Engelhardt <jengelh@medozas.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,14 +23,6 @@
MODULE_ALIAS("ip6t_mark");
static bool
-mark_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct xt_mark_info *info = par->matchinfo;
-
- return ((skb->mark & info->mask) == info->mark) ^ info->invert;
-}
-
-static bool
mark_mt(const struct sk_buff *skb, const struct xt_match_param *par)
{
const struct xt_mark_mtinfo1 *info = par->matchinfo;
@@ -38,81 +30,23 @@
return ((skb->mark & info->mask) == info->mark) ^ info->invert;
}
-static bool mark_mt_check_v0(const struct xt_mtchk_param *par)
-{
- const struct xt_mark_info *minfo = par->matchinfo;
-
- if (minfo->mark > 0xffffffff || minfo->mask > 0xffffffff) {
- printk(KERN_WARNING "mark: only supports 32bit mark\n");
- return false;
- }
- return true;
-}
-
-#ifdef CONFIG_COMPAT
-struct compat_xt_mark_info {
- compat_ulong_t mark, mask;
- u_int8_t invert;
- u_int8_t __pad1;
- u_int16_t __pad2;
-};
-
-static void mark_mt_compat_from_user_v0(void *dst, void *src)
-{
- const struct compat_xt_mark_info *cm = src;
- struct xt_mark_info m = {
- .mark = cm->mark,
- .mask = cm->mask,
- .invert = cm->invert,
- };
- memcpy(dst, &m, sizeof(m));
-}
-
-static int mark_mt_compat_to_user_v0(void __user *dst, void *src)
-{
- const struct xt_mark_info *m = src;
- struct compat_xt_mark_info cm = {
- .mark = m->mark,
- .mask = m->mask,
- .invert = m->invert,
- };
- return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
-}
-#endif /* CONFIG_COMPAT */
-
-static struct xt_match mark_mt_reg[] __read_mostly = {
- {
- .name = "mark",
- .revision = 0,
- .family = NFPROTO_UNSPEC,
- .checkentry = mark_mt_check_v0,
- .match = mark_mt_v0,
- .matchsize = sizeof(struct xt_mark_info),
-#ifdef CONFIG_COMPAT
- .compatsize = sizeof(struct compat_xt_mark_info),
- .compat_from_user = mark_mt_compat_from_user_v0,
- .compat_to_user = mark_mt_compat_to_user_v0,
-#endif
- .me = THIS_MODULE,
- },
- {
- .name = "mark",
- .revision = 1,
- .family = NFPROTO_UNSPEC,
- .match = mark_mt,
- .matchsize = sizeof(struct xt_mark_mtinfo1),
- .me = THIS_MODULE,
- },
+static struct xt_match mark_mt_reg __read_mostly = {
+ .name = "mark",
+ .revision = 1,
+ .family = NFPROTO_UNSPEC,
+ .match = mark_mt,
+ .matchsize = sizeof(struct xt_mark_mtinfo1),
+ .me = THIS_MODULE,
};
static int __init mark_mt_init(void)
{
- return xt_register_matches(mark_mt_reg, ARRAY_SIZE(mark_mt_reg));
+ return xt_register_match(&mark_mt_reg);
}
static void __exit mark_mt_exit(void)
{
- xt_unregister_matches(mark_mt_reg, ARRAY_SIZE(mark_mt_reg));
+ xt_unregister_match(&mark_mt_reg);
}
module_init(mark_mt_init);
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 0f482e2..63e1905 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -70,7 +70,8 @@
}
static int xt_osf_add_callback(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *osf_attrs[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const osf_attrs[])
{
struct xt_osf_user_finger *f;
struct xt_osf_finger *kf = NULL, *sf;
@@ -112,7 +113,8 @@
}
static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb,
- struct nlmsghdr *nlh, struct nlattr *osf_attrs[])
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const osf_attrs[])
{
struct xt_osf_user_finger *f;
struct xt_osf_finger *sf;
diff --git a/net/netfilter/xt_owner.c b/net/netfilter/xt_owner.c
index 22b2a5e..d24c76d 100644
--- a/net/netfilter/xt_owner.c
+++ b/net/netfilter/xt_owner.c
@@ -5,7 +5,6 @@
* (C) 2000 Marc Boucher <marc@mbsi.ca>
*
* Copyright © CC Computer Consultants GmbH, 2007 - 2008
- * <jengelh@computergmbh.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,60 +16,6 @@
#include <net/sock.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_owner.h>
-#include <linux/netfilter_ipv4/ipt_owner.h>
-#include <linux/netfilter_ipv6/ip6t_owner.h>
-
-static bool
-owner_mt_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct ipt_owner_info *info = par->matchinfo;
- const struct file *filp;
-
- if (skb->sk == NULL || skb->sk->sk_socket == NULL)
- return false;
-
- filp = skb->sk->sk_socket->file;
- if (filp == NULL)
- return false;
-
- if (info->match & IPT_OWNER_UID)
- if ((filp->f_cred->fsuid != info->uid) ^
- !!(info->invert & IPT_OWNER_UID))
- return false;
-
- if (info->match & IPT_OWNER_GID)
- if ((filp->f_cred->fsgid != info->gid) ^
- !!(info->invert & IPT_OWNER_GID))
- return false;
-
- return true;
-}
-
-static bool
-owner_mt6_v0(const struct sk_buff *skb, const struct xt_match_param *par)
-{
- const struct ip6t_owner_info *info = par->matchinfo;
- const struct file *filp;
-
- if (skb->sk == NULL || skb->sk->sk_socket == NULL)
- return false;
-
- filp = skb->sk->sk_socket->file;
- if (filp == NULL)
- return false;
-
- if (info->match & IP6T_OWNER_UID)
- if ((filp->f_cred->fsuid != info->uid) ^
- !!(info->invert & IP6T_OWNER_UID))
- return false;
-
- if (info->match & IP6T_OWNER_GID)
- if ((filp->f_cred->fsgid != info->gid) ^
- !!(info->invert & IP6T_OWNER_GID))
- return false;
-
- return true;
-}
static bool
owner_mt(const struct sk_buff *skb, const struct xt_match_param *par)
@@ -107,81 +52,30 @@
return true;
}
-static bool owner_mt_check_v0(const struct xt_mtchk_param *par)
-{
- const struct ipt_owner_info *info = par->matchinfo;
-
- if (info->match & (IPT_OWNER_PID | IPT_OWNER_SID | IPT_OWNER_COMM)) {
- printk(KERN_WARNING KBUILD_MODNAME
- ": PID, SID and command matching is not "
- "supported anymore\n");
- return false;
- }
-
- return true;
-}
-
-static bool owner_mt6_check_v0(const struct xt_mtchk_param *par)
-{
- const struct ip6t_owner_info *info = par->matchinfo;
-
- if (info->match & (IP6T_OWNER_PID | IP6T_OWNER_SID)) {
- printk(KERN_WARNING KBUILD_MODNAME
- ": PID and SID matching is not supported anymore\n");
- return false;
- }
-
- return true;
-}
-
-static struct xt_match owner_mt_reg[] __read_mostly = {
- {
- .name = "owner",
- .revision = 0,
- .family = NFPROTO_IPV4,
- .match = owner_mt_v0,
- .matchsize = sizeof(struct ipt_owner_info),
- .checkentry = owner_mt_check_v0,
- .hooks = (1 << NF_INET_LOCAL_OUT) |
- (1 << NF_INET_POST_ROUTING),
- .me = THIS_MODULE,
- },
- {
- .name = "owner",
- .revision = 0,
- .family = NFPROTO_IPV6,
- .match = owner_mt6_v0,
- .matchsize = sizeof(struct ip6t_owner_info),
- .checkentry = owner_mt6_check_v0,
- .hooks = (1 << NF_INET_LOCAL_OUT) |
- (1 << NF_INET_POST_ROUTING),
- .me = THIS_MODULE,
- },
- {
- .name = "owner",
- .revision = 1,
- .family = NFPROTO_UNSPEC,
- .match = owner_mt,
- .matchsize = sizeof(struct xt_owner_match_info),
- .hooks = (1 << NF_INET_LOCAL_OUT) |
- (1 << NF_INET_POST_ROUTING),
- .me = THIS_MODULE,
- },
+static struct xt_match owner_mt_reg __read_mostly = {
+ .name = "owner",
+ .revision = 1,
+ .family = NFPROTO_UNSPEC,
+ .match = owner_mt,
+ .matchsize = sizeof(struct xt_owner_match_info),
+ .hooks = (1 << NF_INET_LOCAL_OUT) |
+ (1 << NF_INET_POST_ROUTING),
+ .me = THIS_MODULE,
};
static int __init owner_mt_init(void)
{
- return xt_register_matches(owner_mt_reg, ARRAY_SIZE(owner_mt_reg));
+ return xt_register_match(&owner_mt_reg);
}
static void __exit owner_mt_exit(void)
{
- xt_unregister_matches(owner_mt_reg, ARRAY_SIZE(owner_mt_reg));
+ xt_unregister_match(&owner_mt_reg);
}
module_init(owner_mt_init);
module_exit(owner_mt_exit);
-MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@medozas.de>");
MODULE_DESCRIPTION("Xtables: socket owner matching");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_owner");
diff --git a/net/netfilter/xt_quota.c b/net/netfilter/xt_quota.c
index 98fc190..390b7d0 100644
--- a/net/netfilter/xt_quota.c
+++ b/net/netfilter/xt_quota.c
@@ -52,7 +52,7 @@
q->master = kmalloc(sizeof(*q->master), GFP_KERNEL);
if (q->master == NULL)
- return -ENOMEM;
+ return false;
q->master->quota = q->quota;
return true;
diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index 16e6c43..6ce0020 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -185,8 +185,7 @@
return 0;
cfg_unlbl_map_add_failure:
- if (entry != NULL)
- kfree(entry->domain);
+ kfree(entry->domain);
kfree(entry);
kfree(addrmap);
kfree(map4);
@@ -385,8 +384,7 @@
cfg_cipsov4_map_add_failure:
cipso_v4_doi_putdef(doi_def);
- if (entry != NULL)
- kfree(entry->domain);
+ kfree(entry->domain);
kfree(entry);
kfree(addrmap);
kfree(addrinfo);
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 2936fa3..d0ff382 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -83,6 +83,11 @@
struct module *module;
};
+struct listeners_rcu_head {
+ struct rcu_head rcu_head;
+ void *ptr;
+};
+
#define NETLINK_KERNEL_SOCKET 0x1
#define NETLINK_RECV_PKTINFO 0x2
#define NETLINK_BROADCAST_SEND_ERROR 0x4
@@ -1356,7 +1361,7 @@
struct netlink_sock *nlk = nlk_sk(sk);
int noblock = flags&MSG_DONTWAIT;
size_t copied;
- struct sk_buff *skb;
+ struct sk_buff *skb, *frag __maybe_unused = NULL;
int err;
if (flags&MSG_OOB)
@@ -1368,6 +1373,35 @@
if (skb == NULL)
goto out;
+#ifdef CONFIG_COMPAT_NETLINK_MESSAGES
+ if (unlikely(skb_shinfo(skb)->frag_list)) {
+ bool need_compat = !!(flags & MSG_CMSG_COMPAT);
+
+ /*
+ * If this skb has a frag_list, then here that means that
+ * we will have to use the frag_list skb for compat tasks
+ * and the regular skb for non-compat tasks.
+ *
+ * The skb might (and likely will) be cloned, so we can't
+ * just reset frag_list and go on with things -- we need to
+ * keep that. For the compat case that's easy -- simply get
+ * a reference to the compat skb and free the regular one
+ * including the frag. For the non-compat case, we need to
+ * avoid sending the frag to the user -- so assign NULL but
+ * restore it below before freeing the skb.
+ */
+ if (need_compat) {
+ struct sk_buff *compskb = skb_shinfo(skb)->frag_list;
+ skb_get(compskb);
+ kfree_skb(skb);
+ skb = compskb;
+ } else {
+ frag = skb_shinfo(skb)->frag_list;
+ skb_shinfo(skb)->frag_list = NULL;
+ }
+ }
+#endif
+
msg->msg_namelen = 0;
copied = skb->len;
@@ -1398,6 +1432,11 @@
siocb->scm->creds = *NETLINK_CREDS(skb);
if (flags & MSG_TRUNC)
copied = skb->len;
+
+#ifdef CONFIG_COMPAT_NETLINK_MESSAGES
+ skb_shinfo(skb)->frag_list = frag;
+#endif
+
skb_free_datagram(sk, skb);
if (nlk->cb && atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2)
@@ -1453,7 +1492,8 @@
if (groups < 32)
groups = 32;
- listeners = kzalloc(NLGRPSZ(groups), GFP_KERNEL);
+ listeners = kzalloc(NLGRPSZ(groups) + sizeof(struct listeners_rcu_head),
+ GFP_KERNEL);
if (!listeners)
goto out_sock_release;
@@ -1501,6 +1541,14 @@
EXPORT_SYMBOL(netlink_kernel_release);
+static void netlink_free_old_listeners(struct rcu_head *rcu_head)
+{
+ struct listeners_rcu_head *lrh;
+
+ lrh = container_of(rcu_head, struct listeners_rcu_head, rcu_head);
+ kfree(lrh->ptr);
+}
+
/**
* netlink_change_ngroups - change number of multicast groups
*
@@ -1516,6 +1564,7 @@
int netlink_change_ngroups(struct sock *sk, unsigned int groups)
{
unsigned long *listeners, *old = NULL;
+ struct listeners_rcu_head *old_rcu_head;
struct netlink_table *tbl = &nl_table[sk->sk_protocol];
int err = 0;
@@ -1524,7 +1573,9 @@
netlink_table_grab();
if (NLGRPSZ(tbl->groups) < NLGRPSZ(groups)) {
- listeners = kzalloc(NLGRPSZ(groups), GFP_ATOMIC);
+ listeners = kzalloc(NLGRPSZ(groups) +
+ sizeof(struct listeners_rcu_head),
+ GFP_ATOMIC);
if (!listeners) {
err = -ENOMEM;
goto out_ungrab;
@@ -1532,16 +1583,24 @@
old = tbl->listeners;
memcpy(listeners, old, NLGRPSZ(tbl->groups));
rcu_assign_pointer(tbl->listeners, listeners);
+ /*
+ * Free the old memory after an RCU grace period so we
+ * don't leak it. We use call_rcu() here in order to be
+ * able to call this function from atomic contexts. The
+ * allocation of this memory will have reserved enough
+ * space for struct listeners_rcu_head at the end.
+ */
+ old_rcu_head = (void *)(tbl->listeners +
+ NLGRPLONGS(tbl->groups));
+ old_rcu_head->ptr = old;
+ call_rcu(&old_rcu_head->rcu_head, netlink_free_old_listeners);
}
tbl->groups = groups;
out_ungrab:
netlink_table_ungrab();
- synchronize_rcu();
- kfree(old);
return err;
}
-EXPORT_SYMBOL(netlink_change_ngroups);
/**
* netlink_clear_multicast_users - kick off multicast listeners
@@ -1564,7 +1623,6 @@
netlink_table_ungrab();
}
-EXPORT_SYMBOL(netlink_clear_multicast_users);
void netlink_set_nonroot(int protocol, unsigned int flags)
{
@@ -1647,7 +1705,7 @@
}
int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
- struct nlmsghdr *nlh,
+ const struct nlmsghdr *nlh,
int (*dump)(struct sk_buff *skb,
struct netlink_callback *),
int (*done)(struct netlink_callback *))
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index eed4c6a..66f6ba0 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -18,8 +18,6 @@
#include <net/sock.h>
#include <net/genetlink.h>
-struct sock *genl_sock = NULL;
-
static DEFINE_MUTEX(genl_mutex); /* serialization of message processing */
static inline void genl_lock(void)
@@ -138,7 +136,7 @@
{
int id;
unsigned long *new_groups;
- int err;
+ int err = 0;
BUG_ON(grp->name[0] == '\0');
@@ -175,10 +173,31 @@
mc_groups_longs++;
}
- err = netlink_change_ngroups(genl_sock,
- mc_groups_longs * BITS_PER_LONG);
- if (err)
- goto out;
+ if (family->netnsok) {
+ struct net *net;
+
+ rcu_read_lock();
+ for_each_net_rcu(net) {
+ err = netlink_change_ngroups(net->genl_sock,
+ mc_groups_longs * BITS_PER_LONG);
+ if (err) {
+ /*
+ * No need to roll back, can only fail if
+ * memory allocation fails and then the
+ * number of _possible_ groups has been
+ * increased on some sockets which is ok.
+ */
+ rcu_read_unlock();
+ goto out;
+ }
+ }
+ rcu_read_unlock();
+ } else {
+ err = netlink_change_ngroups(init_net.genl_sock,
+ mc_groups_longs * BITS_PER_LONG);
+ if (err)
+ goto out;
+ }
grp->id = id;
set_bit(id, mc_groups);
@@ -195,8 +214,14 @@
static void __genl_unregister_mc_group(struct genl_family *family,
struct genl_multicast_group *grp)
{
+ struct net *net;
BUG_ON(grp->family != family);
- netlink_clear_multicast_users(genl_sock, grp->id);
+
+ rcu_read_lock();
+ for_each_net_rcu(net)
+ netlink_clear_multicast_users(net->genl_sock, grp->id);
+ rcu_read_unlock();
+
clear_bit(grp->id, mc_groups);
list_del(&grp->list);
genl_ctrl_event(CTRL_CMD_DELMCAST_GRP, grp);
@@ -467,6 +492,7 @@
{
struct genl_ops *ops;
struct genl_family *family;
+ struct net *net = sock_net(skb->sk);
struct genl_info info;
struct genlmsghdr *hdr = nlmsg_data(nlh);
int hdrlen, err;
@@ -475,6 +501,10 @@
if (family == NULL)
return -ENOENT;
+ /* this family doesn't exist in this netns */
+ if (!family->netnsok && !net_eq(net, &init_net))
+ return -ENOENT;
+
hdrlen = GENL_HDRLEN + family->hdrsize;
if (nlh->nlmsg_len < nlmsg_msg_size(hdrlen))
return -EINVAL;
@@ -492,7 +522,7 @@
return -EOPNOTSUPP;
genl_unlock();
- err = netlink_dump_start(genl_sock, skb, nlh,
+ err = netlink_dump_start(net->genl_sock, skb, nlh,
ops->dumpit, ops->done);
genl_lock();
return err;
@@ -514,6 +544,7 @@
info.genlhdr = nlmsg_data(nlh);
info.userhdr = nlmsg_data(nlh) + GENL_HDRLEN;
info.attrs = family->attrbuf;
+ genl_info_net_set(&info, net);
return ops->doit(skb, &info);
}
@@ -534,6 +565,7 @@
.name = "nlctrl",
.version = 0x2,
.maxattr = CTRL_ATTR_MAX,
+ .netnsok = true,
};
static int ctrl_fill_info(struct genl_family *family, u32 pid, u32 seq,
@@ -650,6 +682,7 @@
int i, n = 0;
struct genl_family *rt;
+ struct net *net = sock_net(skb->sk);
int chains_to_skip = cb->args[0];
int fams_to_skip = cb->args[1];
@@ -658,6 +691,8 @@
continue;
n = 0;
list_for_each_entry(rt, genl_family_chain(i), family_list) {
+ if (!rt->netnsok && !net_eq(net, &init_net))
+ continue;
if (++n < fams_to_skip)
continue;
if (ctrl_fill_info(rt, NETLINK_CB(cb->skb).pid,
@@ -729,6 +764,7 @@
if (info->attrs[CTRL_ATTR_FAMILY_ID]) {
u16 id = nla_get_u16(info->attrs[CTRL_ATTR_FAMILY_ID]);
res = genl_family_find_byid(id);
+ err = -ENOENT;
}
if (info->attrs[CTRL_ATTR_FAMILY_NAME]) {
@@ -736,49 +772,61 @@
name = nla_data(info->attrs[CTRL_ATTR_FAMILY_NAME]);
res = genl_family_find_byname(name);
+ err = -ENOENT;
}
- if (res == NULL) {
- err = -ENOENT;
- goto errout;
+ if (res == NULL)
+ return err;
+
+ if (!res->netnsok && !net_eq(genl_info_net(info), &init_net)) {
+ /* family doesn't exist here */
+ return -ENOENT;
}
msg = ctrl_build_family_msg(res, info->snd_pid, info->snd_seq,
CTRL_CMD_NEWFAMILY);
- if (IS_ERR(msg)) {
- err = PTR_ERR(msg);
- goto errout;
- }
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
- err = genlmsg_reply(msg, info);
-errout:
- return err;
+ return genlmsg_reply(msg, info);
}
static int genl_ctrl_event(int event, void *data)
{
struct sk_buff *msg;
+ struct genl_family *family;
+ struct genl_multicast_group *grp;
- if (genl_sock == NULL)
+ /* genl is still initialising */
+ if (!init_net.genl_sock)
return 0;
switch (event) {
case CTRL_CMD_NEWFAMILY:
case CTRL_CMD_DELFAMILY:
- msg = ctrl_build_family_msg(data, 0, 0, event);
- if (IS_ERR(msg))
- return PTR_ERR(msg);
-
- genlmsg_multicast(msg, 0, GENL_ID_CTRL, GFP_KERNEL);
+ family = data;
+ msg = ctrl_build_family_msg(family, 0, 0, event);
break;
case CTRL_CMD_NEWMCAST_GRP:
case CTRL_CMD_DELMCAST_GRP:
+ grp = data;
+ family = grp->family;
msg = ctrl_build_mcgrp_msg(data, 0, 0, event);
- if (IS_ERR(msg))
- return PTR_ERR(msg);
-
- genlmsg_multicast(msg, 0, GENL_ID_CTRL, GFP_KERNEL);
break;
+ default:
+ return -EINVAL;
+ }
+
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
+
+ if (!family->netnsok) {
+ genlmsg_multicast_netns(&init_net, msg, 0,
+ GENL_ID_CTRL, GFP_KERNEL);
+ } else {
+ rcu_read_lock();
+ genlmsg_multicast_allns(msg, 0, GENL_ID_CTRL, GFP_ATOMIC);
+ rcu_read_unlock();
}
return 0;
@@ -795,6 +843,33 @@
.name = "notify",
};
+static int __net_init genl_pernet_init(struct net *net)
+{
+ /* we'll bump the group number right afterwards */
+ net->genl_sock = netlink_kernel_create(net, NETLINK_GENERIC, 0,
+ genl_rcv, &genl_mutex,
+ THIS_MODULE);
+
+ if (!net->genl_sock && net_eq(net, &init_net))
+ panic("GENL: Cannot initialize generic netlink\n");
+
+ if (!net->genl_sock)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __net_exit genl_pernet_exit(struct net *net)
+{
+ netlink_kernel_release(net->genl_sock);
+ net->genl_sock = NULL;
+}
+
+static struct pernet_operations genl_pernet_ops = {
+ .init = genl_pernet_init,
+ .exit = genl_pernet_exit,
+};
+
static int __init genl_init(void)
{
int i, err;
@@ -804,36 +879,67 @@
err = genl_register_family(&genl_ctrl);
if (err < 0)
- goto errout;
+ goto problem;
err = genl_register_ops(&genl_ctrl, &genl_ctrl_ops);
if (err < 0)
- goto errout_register;
+ goto problem;
netlink_set_nonroot(NETLINK_GENERIC, NL_NONROOT_RECV);
- /* we'll bump the group number right afterwards */
- genl_sock = netlink_kernel_create(&init_net, NETLINK_GENERIC, 0,
- genl_rcv, &genl_mutex, THIS_MODULE);
- if (genl_sock == NULL)
- panic("GENL: Cannot initialize generic netlink\n");
+ err = register_pernet_subsys(&genl_pernet_ops);
+ if (err)
+ goto problem;
err = genl_register_mc_group(&genl_ctrl, ¬ify_grp);
if (err < 0)
- goto errout_register;
+ goto problem;
return 0;
-errout_register:
- genl_unregister_family(&genl_ctrl);
-errout:
+problem:
panic("GENL: Cannot register controller: %d\n", err);
}
subsys_initcall(genl_init);
-EXPORT_SYMBOL(genl_sock);
EXPORT_SYMBOL(genl_register_ops);
EXPORT_SYMBOL(genl_unregister_ops);
EXPORT_SYMBOL(genl_register_family);
EXPORT_SYMBOL(genl_unregister_family);
+
+static int genlmsg_mcast(struct sk_buff *skb, u32 pid, unsigned long group,
+ gfp_t flags)
+{
+ struct sk_buff *tmp;
+ struct net *net, *prev = NULL;
+ int err;
+
+ for_each_net_rcu(net) {
+ if (prev) {
+ tmp = skb_clone(skb, flags);
+ if (!tmp) {
+ err = -ENOMEM;
+ goto error;
+ }
+ err = nlmsg_multicast(prev->genl_sock, tmp,
+ pid, group, flags);
+ if (err)
+ goto error;
+ }
+
+ prev = net;
+ }
+
+ return nlmsg_multicast(prev->genl_sock, skb, pid, group, flags);
+ error:
+ kfree_skb(skb);
+ return err;
+}
+
+int genlmsg_multicast_allns(struct sk_buff *skb, u32 pid, unsigned int group,
+ gfp_t flags)
+{
+ return genlmsg_mcast(skb, pid, group, flags);
+}
+EXPORT_SYMBOL(genlmsg_multicast_allns);
diff --git a/net/netrom/nr_dev.c b/net/netrom/nr_dev.c
index 3513724..7aa11b0 100644
--- a/net/netrom/nr_dev.c
+++ b/net/netrom/nr_dev.c
@@ -169,7 +169,7 @@
return 0;
}
-static int nr_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t nr_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net_device_stats *stats = &dev->stats;
unsigned int len = skb->len;
@@ -177,13 +177,13 @@
if (!nr_route_frame(skb, NULL)) {
kfree_skb(skb);
stats->tx_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
stats->tx_packets++;
stats->tx_bytes += len;
- return 0;
+ return NETDEV_TX_OK;
}
static const struct header_ops nr_header_ops = {
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ebe5718..d3d52c66 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -137,8 +137,7 @@
/* Private packet socket structures. */
-struct packet_mclist
-{
+struct packet_mclist {
struct packet_mclist *next;
int ifindex;
int count;
@@ -149,8 +148,7 @@
/* identical to struct packet_mreq except it has
* a longer address field.
*/
-struct packet_mreq_max
-{
+struct packet_mreq_max {
int mr_ifindex;
unsigned short mr_type;
unsigned short mr_alen;
@@ -162,7 +160,7 @@
int closing, int tx_ring);
struct packet_ring_buffer {
- char * *pg_vec;
+ char **pg_vec;
unsigned int head;
unsigned int frames_per_block;
unsigned int frame_size;
@@ -239,7 +237,7 @@
flush_dcache_page(virt_to_page(&h.h2->tp_status));
break;
default:
- printk(KERN_ERR "TPACKET version not supported\n");
+ pr_err("TPACKET version not supported\n");
BUG();
}
@@ -265,7 +263,7 @@
flush_dcache_page(virt_to_page(&h.h2->tp_status));
return h.h2->tp_status;
default:
- printk(KERN_ERR "TPACKET version not supported\n");
+ pr_err("TPACKET version not supported\n");
BUG();
return 0;
}
@@ -327,7 +325,7 @@
WARN_ON(atomic_read(&sk->sk_wmem_alloc));
if (!sock_flag(sk, SOCK_DEAD)) {
- printk("Attempt to release alive packet socket: %p\n", sk);
+ pr_err("Attempt to release alive packet socket: %p\n", sk);
return;
}
@@ -339,7 +337,8 @@
static const struct proto_ops packet_ops_spkt;
-static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev)
{
struct sock *sk;
struct sockaddr_pkt *spkt;
@@ -368,7 +367,8 @@
if (dev_net(dev) != sock_net(sk))
goto out;
- if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ if (skb == NULL)
goto oom;
/* drop any routing info */
@@ -394,7 +394,7 @@
* to prevent sockets using all the memory up.
*/
- if (sock_queue_rcv_skb(sk,skb) == 0)
+ if (sock_queue_rcv_skb(sk, skb) == 0)
return 0;
out:
@@ -413,25 +413,23 @@
struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
- struct sockaddr_pkt *saddr=(struct sockaddr_pkt *)msg->msg_name;
+ struct sockaddr_pkt *saddr = (struct sockaddr_pkt *)msg->msg_name;
struct sk_buff *skb;
struct net_device *dev;
- __be16 proto=0;
+ __be16 proto = 0;
int err;
/*
* Get and verify the address.
*/
- if (saddr)
- {
+ if (saddr) {
if (msg->msg_namelen < sizeof(struct sockaddr))
- return(-EINVAL);
- if (msg->msg_namelen==sizeof(struct sockaddr_pkt))
- proto=saddr->spkt_protocol;
- }
- else
- return(-ENOTCONN); /* SOCK_PACKET must be sent giving an address */
+ return -EINVAL;
+ if (msg->msg_namelen == sizeof(struct sockaddr_pkt))
+ proto = saddr->spkt_protocol;
+ } else
+ return -ENOTCONN; /* SOCK_PACKET must be sent giving an address */
/*
* Find the device first to size check it
@@ -448,8 +446,8 @@
goto out_unlock;
/*
- * You may not queue a frame bigger than the mtu. This is the lowest level
- * raw protocol and you must do your own fragmentation at this level.
+ * You may not queue a frame bigger than the mtu. This is the lowest level
+ * raw protocol and you must do your own fragmentation at this level.
*/
err = -EMSGSIZE;
@@ -460,9 +458,9 @@
skb = sock_wmalloc(sk, len + LL_RESERVED_SPACE(dev), 0, GFP_KERNEL);
/*
- * If the write buffer is full, then tough. At this level the user gets to
- * deal with the problem - do your own algorithmic backoffs. That's far
- * more flexible.
+ * If the write buffer is full, then tough. At this level the user
+ * gets to deal with the problem - do your own algorithmic backoffs.
+ * That's far more flexible.
*/
if (skb == NULL)
@@ -488,7 +486,7 @@
}
/* Returns -EFAULT on error */
- err = memcpy_fromiovec(skb_put(skb,len), msg->msg_iov, len);
+ err = memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len);
skb->protocol = proto;
skb->dev = dev;
skb->priority = sk->sk_priority;
@@ -501,7 +499,7 @@
dev_queue_xmit(skb);
dev_put(dev);
- return(len);
+ return len;
out_free:
kfree_skb(skb);
@@ -537,12 +535,13 @@
we will not harm anyone.
*/
-static int packet_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev)
{
struct sock *sk;
struct sockaddr_ll *sll;
struct packet_sock *po;
- u8 * skb_head = skb->data;
+ u8 *skb_head = skb->data;
int skb_len = skb->len;
unsigned int snaplen, res;
@@ -648,7 +647,8 @@
}
#ifdef CONFIG_PACKET_MMAP
-static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev)
{
struct sock *sk;
struct packet_sock *po;
@@ -658,7 +658,7 @@
struct tpacket2_hdr *h2;
void *raw;
} h;
- u8 * skb_head = skb->data;
+ u8 *skb_head = skb->data;
int skb_len = skb->len;
unsigned int snaplen, res;
unsigned long status = TP_STATUS_LOSING|TP_STATUS_USER;
@@ -821,7 +821,7 @@
static void tpacket_destruct_skb(struct sk_buff *skb)
{
struct packet_sock *po = pkt_sk(skb->sk);
- void * ph;
+ void *ph;
BUG_ON(skb == NULL);
@@ -836,9 +836,9 @@
sock_wfree(skb);
}
-static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff * skb,
- void * frame, struct net_device *dev, int size_max,
- __be16 proto, unsigned char * addr)
+static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff *skb,
+ void *frame, struct net_device *dev, int size_max,
+ __be16 proto, unsigned char *addr)
{
union {
struct tpacket_hdr *h1;
@@ -867,8 +867,7 @@
break;
}
if (unlikely(tp_len > size_max)) {
- printk(KERN_ERR "packet size is too long (%d > %d)\n",
- tp_len, size_max);
+ pr_err("packet size is too long (%d > %d)\n", tp_len, size_max);
return -EMSGSIZE;
}
@@ -883,12 +882,11 @@
NULL, tp_len);
if (unlikely(err < 0))
return -EINVAL;
- } else if (dev->hard_header_len ) {
+ } else if (dev->hard_header_len) {
/* net device doesn't like empty head */
if (unlikely(tp_len <= dev->hard_header_len)) {
- printk(KERN_ERR "packet size is too short "
- "(%d < %d)\n", tp_len,
- dev->hard_header_len);
+ pr_err("packet size is too short (%d < %d)\n",
+ tp_len, dev->hard_header_len);
return -EINVAL;
}
@@ -917,9 +915,8 @@
nr_frags = skb_shinfo(skb)->nr_frags;
if (unlikely(nr_frags >= MAX_SKB_FRAGS)) {
- printk(KERN_ERR "Packet exceed the number "
- "of skb frags(%lu)\n",
- MAX_SKB_FRAGS);
+ pr_err("Packet exceed the number of skb frags(%lu)\n",
+ MAX_SKB_FRAGS);
return -EFAULT;
}
@@ -944,8 +941,8 @@
struct net_device *dev;
__be16 proto;
int ifindex, err, reserve = 0;
- void * ph;
- struct sockaddr_ll *saddr=(struct sockaddr_ll *)msg->msg_name;
+ void *ph;
+ struct sockaddr_ll *saddr = (struct sockaddr_ll *)msg->msg_name;
int tp_len, size_max;
unsigned char *addr;
int len_sum = 0;
@@ -1038,8 +1035,7 @@
goto out_xmit;
packet_increment_head(&po->tx_ring);
len_sum += tp_len;
- }
- while (likely((ph != NULL) || ((!(msg->msg_flags & MSG_DONTWAIT))
+ } while (likely((ph != NULL) || ((!(msg->msg_flags & MSG_DONTWAIT))
&& (atomic_read(&po->tx_ring.pending))))
);
@@ -1064,7 +1060,7 @@
struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
- struct sockaddr_ll *saddr=(struct sockaddr_ll *)msg->msg_name;
+ struct sockaddr_ll *saddr = (struct sockaddr_ll *)msg->msg_name;
struct sk_buff *skb;
struct net_device *dev;
__be16 proto;
@@ -1110,7 +1106,7 @@
skb = sock_alloc_send_skb(sk, len + LL_ALLOCATED_SPACE(dev),
msg->msg_flags & MSG_DONTWAIT, &err);
- if (skb==NULL)
+ if (skb == NULL)
goto out_unlock;
skb_reserve(skb, LL_RESERVED_SPACE(dev));
@@ -1122,7 +1118,7 @@
goto out_free;
/* Returns -EFAULT on error */
- err = memcpy_fromiovec(skb_put(skb,len), msg->msg_iov, len);
+ err = memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len);
if (err)
goto out_free;
@@ -1140,7 +1136,7 @@
dev_put(dev);
- return(len);
+ return len;
out_free:
kfree_skb(skb);
@@ -1283,9 +1279,10 @@
* Bind a packet socket to a device
*/
-static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr, int addr_len)
+static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr,
+ int addr_len)
{
- struct sock *sk=sock->sk;
+ struct sock *sk = sock->sk;
char name[15];
struct net_device *dev;
int err = -ENODEV;
@@ -1296,7 +1293,7 @@
if (addr_len != sizeof(struct sockaddr))
return -EINVAL;
- strlcpy(name,uaddr->sa_data,sizeof(name));
+ strlcpy(name, uaddr->sa_data, sizeof(name));
dev = dev_get_by_name(sock_net(sk), name);
if (dev) {
@@ -1308,8 +1305,8 @@
static int packet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
- struct sockaddr_ll *sll = (struct sockaddr_ll*)uaddr;
- struct sock *sk=sock->sk;
+ struct sockaddr_ll *sll = (struct sockaddr_ll *)uaddr;
+ struct sock *sk = sock->sk;
struct net_device *dev = NULL;
int err;
@@ -1404,7 +1401,7 @@
sk_add_node(sk, &net->packet.sklist);
sock_prot_inuse_add(net, &packet_proto, 1);
write_unlock_bh(&net->packet.sklist_lock);
- return(0);
+ return 0;
out:
return err;
}
@@ -1441,7 +1438,7 @@
* but then it will block.
*/
- skb=skb_recv_datagram(sk,flags,flags&MSG_DONTWAIT,&err);
+ skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &err);
/*
* An error occurred so return it. Because skb_recv_datagram()
@@ -1469,10 +1466,9 @@
*/
copied = skb->len;
- if (copied > len)
- {
- copied=len;
- msg->msg_flags|=MSG_TRUNC;
+ if (copied > len) {
+ copied = len;
+ msg->msg_flags |= MSG_TRUNC;
}
err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
@@ -1539,7 +1535,7 @@
struct net_device *dev;
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
- struct sockaddr_ll *sll = (struct sockaddr_ll*)uaddr;
+ struct sockaddr_ll *sll = (struct sockaddr_ll *)uaddr;
if (peer)
return -EOPNOTSUPP;
@@ -1584,14 +1580,15 @@
else
return dev_unicast_delete(dev, i->addr);
break;
- default:;
+ default:
+ break;
}
return 0;
}
static void packet_dev_mclist(struct net_device *dev, struct packet_mclist *i, int what)
{
- for ( ; i; i=i->next) {
+ for ( ; i; i = i->next) {
if (i->ifindex == dev->ifindex)
packet_dev_mc(dev, i, what);
}
@@ -1693,7 +1690,8 @@
struct net_device *dev;
po->mclist = ml->next;
- if ((dev = dev_get_by_index(sock_net(sk), ml->ifindex)) != NULL) {
+ dev = dev_get_by_index(sock_net(sk), ml->ifindex);
+ if (dev != NULL) {
packet_dev_mc(dev, ml, -1);
dev_put(dev);
}
@@ -1723,7 +1721,7 @@
return -EINVAL;
if (len > sizeof(mreq))
len = sizeof(mreq);
- if (copy_from_user(&mreq,optval,len))
+ if (copy_from_user(&mreq, optval, len))
return -EFAULT;
if (len < (mreq.mr_alen + offsetof(struct packet_mreq, mr_address)))
return -EINVAL;
@@ -1740,9 +1738,9 @@
{
struct tpacket_req req;
- if (optlen<sizeof(req))
+ if (optlen < sizeof(req))
return -EINVAL;
- if (copy_from_user(&req,optval,sizeof(req)))
+ if (copy_from_user(&req, optval, sizeof(req)))
return -EFAULT;
return packet_set_ring(sk, &req, 0, optname == PACKET_TX_RING);
}
@@ -1750,9 +1748,9 @@
{
int val;
- if (optlen!=sizeof(val))
+ if (optlen != sizeof(val))
return -EINVAL;
- if (copy_from_user(&val,optval,sizeof(val)))
+ if (copy_from_user(&val, optval, sizeof(val)))
return -EFAULT;
pkt_sk(sk)->copy_thresh = val;
@@ -1985,51 +1983,51 @@
struct sock *sk = sock->sk;
switch (cmd) {
- case SIOCOUTQ:
- {
- int amount = sk_wmem_alloc_get(sk);
+ case SIOCOUTQ:
+ {
+ int amount = sk_wmem_alloc_get(sk);
- return put_user(amount, (int __user *)arg);
- }
- case SIOCINQ:
- {
- struct sk_buff *skb;
- int amount = 0;
+ return put_user(amount, (int __user *)arg);
+ }
+ case SIOCINQ:
+ {
+ struct sk_buff *skb;
+ int amount = 0;
- spin_lock_bh(&sk->sk_receive_queue.lock);
- skb = skb_peek(&sk->sk_receive_queue);
- if (skb)
- amount = skb->len;
- spin_unlock_bh(&sk->sk_receive_queue.lock);
- return put_user(amount, (int __user *)arg);
- }
- case SIOCGSTAMP:
- return sock_get_timestamp(sk, (struct timeval __user *)arg);
- case SIOCGSTAMPNS:
- return sock_get_timestampns(sk, (struct timespec __user *)arg);
+ spin_lock_bh(&sk->sk_receive_queue.lock);
+ skb = skb_peek(&sk->sk_receive_queue);
+ if (skb)
+ amount = skb->len;
+ spin_unlock_bh(&sk->sk_receive_queue.lock);
+ return put_user(amount, (int __user *)arg);
+ }
+ case SIOCGSTAMP:
+ return sock_get_timestamp(sk, (struct timeval __user *)arg);
+ case SIOCGSTAMPNS:
+ return sock_get_timestampns(sk, (struct timespec __user *)arg);
#ifdef CONFIG_INET
- case SIOCADDRT:
- case SIOCDELRT:
- case SIOCDARP:
- case SIOCGARP:
- case SIOCSARP:
- case SIOCGIFADDR:
- case SIOCSIFADDR:
- case SIOCGIFBRDADDR:
- case SIOCSIFBRDADDR:
- case SIOCGIFNETMASK:
- case SIOCSIFNETMASK:
- case SIOCGIFDSTADDR:
- case SIOCSIFDSTADDR:
- case SIOCSIFFLAGS:
- if (!net_eq(sock_net(sk), &init_net))
- return -ENOIOCTLCMD;
- return inet_dgram_ops.ioctl(sock, cmd, arg);
+ case SIOCADDRT:
+ case SIOCDELRT:
+ case SIOCDARP:
+ case SIOCGARP:
+ case SIOCSARP:
+ case SIOCGIFADDR:
+ case SIOCSIFADDR:
+ case SIOCGIFBRDADDR:
+ case SIOCSIFBRDADDR:
+ case SIOCGIFNETMASK:
+ case SIOCSIFNETMASK:
+ case SIOCGIFDSTADDR:
+ case SIOCSIFDSTADDR:
+ case SIOCSIFFLAGS:
+ if (!net_eq(sock_net(sk), &init_net))
+ return -ENOIOCTLCMD;
+ return inet_dgram_ops.ioctl(sock, cmd, arg);
#endif
- default:
- return -ENOIOCTLCMD;
+ default:
+ return -ENOIOCTLCMD;
}
return 0;
}
@@ -2039,7 +2037,7 @@
#define packet_poll datagram_poll
#else
-static unsigned int packet_poll(struct file * file, struct socket *sock,
+static unsigned int packet_poll(struct file *file, struct socket *sock,
poll_table *wait)
{
struct sock *sk = sock->sk;
@@ -2069,7 +2067,7 @@
static void packet_mm_open(struct vm_area_struct *vma)
{
struct file *file = vma->vm_file;
- struct socket * sock = file->private_data;
+ struct socket *sock = file->private_data;
struct sock *sk = sock->sk;
if (sk)
@@ -2079,7 +2077,7 @@
static void packet_mm_close(struct vm_area_struct *vma)
{
struct file *file = vma->vm_file;
- struct socket * sock = file->private_data;
+ struct socket *sock = file->private_data;
struct sock *sk = sock->sk;
if (sk)
@@ -2087,8 +2085,8 @@
}
static struct vm_operations_struct packet_mmap_ops = {
- .open = packet_mm_open,
- .close =packet_mm_close,
+ .open = packet_mm_open,
+ .close = packet_mm_close,
};
static void free_pg_vec(char **pg_vec, unsigned int order, unsigned int len)
@@ -2239,8 +2237,8 @@
skb_queue_purge(rb_queue);
#undef XC
if (atomic_read(&po->mapped))
- printk(KERN_DEBUG "packet_mmap: vma is busy: %d\n",
- atomic_read(&po->mapped));
+ pr_err("packet_mmap: vma is busy: %d\n",
+ atomic_read(&po->mapped));
}
mutex_unlock(&po->pg_vec_lock);
@@ -2303,7 +2301,7 @@
int pg_num;
for (pg_num = 0; pg_num < rb->pg_vec_pages;
- pg_num++,page++) {
+ pg_num++, page++) {
err = vm_insert_page(vma, start, page);
if (unlikely(err))
goto out;
@@ -2372,7 +2370,7 @@
};
static struct notifier_block packet_netdev_notifier = {
- .notifier_call =packet_notifier,
+ .notifier_call = packet_notifier,
};
#ifdef CONFIG_PROC_FS
@@ -2402,7 +2400,7 @@
++*pos;
return (v == SEQ_START_TOKEN)
? sk_head(&net->packet.sklist)
- : sk_next((struct sock*)v) ;
+ : sk_next((struct sock *)v) ;
}
static void packet_seq_stop(struct seq_file *seq, void *v)
@@ -2430,7 +2428,7 @@
po->running,
atomic_read(&s->sk_rmem_alloc),
sock_i_uid(s),
- sock_i_ino(s) );
+ sock_i_ino(s));
}
return 0;
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index e087862..ef5c75c 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -159,8 +159,11 @@
static int pn_backlog_rcv(struct sock *sk, struct sk_buff *skb)
{
int err = sock_queue_rcv_skb(sk, skb);
- if (err < 0)
+ if (err < 0) {
kfree_skb(skb);
+ if (err == -ENOMEM)
+ atomic_inc(&sk->sk_drops);
+ }
return err ? NET_RX_DROP : NET_RX_SUCCESS;
}
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 480839d..d183509 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -183,7 +183,7 @@
return 0;
}
-static int gprs_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t gprs_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct gprs_dev *gp = netdev_priv(dev);
struct sock *sk = gp->sk;
@@ -195,7 +195,7 @@
break;
default:
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
skb_orphan(skb);
@@ -215,7 +215,7 @@
netif_stop_queue(dev);
if (pep_writeable(sk))
netif_wake_queue(dev);
- return 0;
+ return NETDEV_TX_OK;
}
static int gprs_set_mtu(struct net_device *dev, int new_mtu)
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index eef833e..b8252d2 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -346,8 +346,10 @@
break;
case PNS_PEP_CTRL_REQ:
- if (skb_queue_len(&pn->ctrlreq_queue) >= PNPIPE_CTRLREQ_MAX)
+ if (skb_queue_len(&pn->ctrlreq_queue) >= PNPIPE_CTRLREQ_MAX) {
+ atomic_inc(&sk->sk_drops);
break;
+ }
__skb_pull(skb, 4);
queue = &pn->ctrlreq_queue;
goto queue;
@@ -358,10 +360,13 @@
err = sock_queue_rcv_skb(sk, skb);
if (!err)
return 0;
+ if (err == -ENOMEM)
+ atomic_inc(&sk->sk_drops);
break;
}
if (pn->rx_credits == 0) {
+ atomic_inc(&sk->sk_drops);
err = -ENOBUFS;
break;
}
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index c2b77a6..2f65dca 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -27,6 +27,8 @@
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/phonet.h>
+#include <linux/proc_fs.h>
+#include <linux/if_arp.h>
#include <net/sock.h>
#include <net/netns/generic.h>
#include <net/phonet/pn_dev.h>
@@ -194,14 +196,37 @@
return err;
}
+/* automatically configure a Phonet device, if supported */
+static int phonet_device_autoconf(struct net_device *dev)
+{
+ struct if_phonet_req req;
+ int ret;
+
+ if (!dev->netdev_ops->ndo_do_ioctl)
+ return -EOPNOTSUPP;
+
+ ret = dev->netdev_ops->ndo_do_ioctl(dev, (struct ifreq *)&req,
+ SIOCPNGAUTOCONF);
+ if (ret < 0)
+ return ret;
+ return phonet_address_add(dev, req.ifr_phonet_autoconf.device);
+}
+
/* notify Phonet of device events */
static int phonet_device_notify(struct notifier_block *me, unsigned long what,
void *arg)
{
struct net_device *dev = arg;
- if (what == NETDEV_UNREGISTER)
+ switch (what) {
+ case NETDEV_REGISTER:
+ if (dev->type == ARPHRD_PHONET)
+ phonet_device_autoconf(dev);
+ break;
+ case NETDEV_UNREGISTER:
phonet_device_destroy(dev);
+ break;
+ }
return 0;
}
@@ -218,6 +243,11 @@
if (!pnn)
return -ENOMEM;
+ if (!proc_net_fops_create(net, "phonet", 0, &pn_sock_seq_fops)) {
+ kfree(pnn);
+ return -ENOMEM;
+ }
+
INIT_LIST_HEAD(&pnn->pndevs.list);
spin_lock_init(&pnn->pndevs.lock);
net_assign_generic(net, phonet_net_id, pnn);
@@ -233,6 +263,8 @@
for_each_netdev(net, dev)
phonet_device_destroy(dev);
rtnl_unlock();
+
+ proc_net_remove(net, "phonet");
kfree(pnn);
}
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index f8b4cee..d21fd35 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -147,7 +147,7 @@
if (fill_addr(skb, pnd->netdev, addr << 2,
NETLINK_CB(cb->skb).pid,
- cb->nlh->nlmsg_seq, RTM_NEWADDR))
+ cb->nlh->nlmsg_seq, RTM_NEWADDR) < 0)
goto out;
}
}
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index ada2a35..7a4ee39 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -412,3 +412,102 @@
return 0;
}
EXPORT_SYMBOL(pn_sock_get_port);
+
+#ifdef CONFIG_PROC_FS
+static struct sock *pn_sock_get_idx(struct seq_file *seq, loff_t pos)
+{
+ struct net *net = seq_file_net(seq);
+ struct hlist_node *node;
+ struct sock *sknode;
+
+ sk_for_each(sknode, node, &pnsocks.hlist) {
+ if (!net_eq(net, sock_net(sknode)))
+ continue;
+ if (!pos)
+ return sknode;
+ pos--;
+ }
+ return NULL;
+}
+
+static struct sock *pn_sock_get_next(struct seq_file *seq, struct sock *sk)
+{
+ struct net *net = seq_file_net(seq);
+
+ do
+ sk = sk_next(sk);
+ while (sk && !net_eq(net, sock_net(sk)));
+
+ return sk;
+}
+
+static void *pn_sock_seq_start(struct seq_file *seq, loff_t *pos)
+ __acquires(pnsocks.lock)
+{
+ spin_lock_bh(&pnsocks.lock);
+ return *pos ? pn_sock_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *pn_sock_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct sock *sk;
+
+ if (v == SEQ_START_TOKEN)
+ sk = pn_sock_get_idx(seq, 0);
+ else
+ sk = pn_sock_get_next(seq, v);
+ (*pos)++;
+ return sk;
+}
+
+static void pn_sock_seq_stop(struct seq_file *seq, void *v)
+ __releases(pnsocks.lock)
+{
+ spin_unlock_bh(&pnsocks.lock);
+}
+
+static int pn_sock_seq_show(struct seq_file *seq, void *v)
+{
+ int len;
+
+ if (v == SEQ_START_TOKEN)
+ seq_printf(seq, "%s%n", "pt loc rem rs st tx_queue rx_queue "
+ " uid inode ref pointer drops", &len);
+ else {
+ struct sock *sk = v;
+ struct pn_sock *pn = pn_sk(sk);
+
+ seq_printf(seq, "%2d %04X:%04X:%02X %02X %08X:%08X %5d %lu "
+ "%d %p %d%n",
+ sk->sk_protocol, pn->sobject, 0, pn->resource,
+ sk->sk_state,
+ sk_wmem_alloc_get(sk), sk_rmem_alloc_get(sk),
+ sock_i_uid(sk), sock_i_ino(sk),
+ atomic_read(&sk->sk_refcnt), sk,
+ atomic_read(&sk->sk_drops), &len);
+ }
+ seq_printf(seq, "%*s\n", 127 - len, "");
+ return 0;
+}
+
+static const struct seq_operations pn_sock_seq_ops = {
+ .start = pn_sock_seq_start,
+ .next = pn_sock_seq_next,
+ .stop = pn_sock_seq_stop,
+ .show = pn_sock_seq_show,
+};
+
+static int pn_sock_open(struct inode *inode, struct file *file)
+{
+ return seq_open_net(inode, file, &pn_sock_seq_ops,
+ sizeof(struct seq_net_private));
+}
+
+const struct file_operations pn_sock_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = pn_sock_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net,
+};
+#endif
diff --git a/net/rds/Kconfig b/net/rds/Kconfig
index 796773b..ec753b3 100644
--- a/net/rds/Kconfig
+++ b/net/rds/Kconfig
@@ -1,14 +1,28 @@
config RDS
- tristate "Reliable Datagram Sockets (RDS) (EXPERIMENTAL)"
- depends on INET && INFINIBAND_IPOIB && EXPERIMENTAL
- depends on INFINIBAND && INFINIBAND_ADDR_TRANS
+ tristate "The RDS Protocol (EXPERIMENTAL)"
+ depends on INET && EXPERIMENTAL
---help---
- RDS provides reliable, sequenced delivery of datagrams
- over Infiniband.
+ The RDS (Reliable Datagram Sockets) protocol provides reliable,
+ sequenced delivery of datagrams over Infiniband, iWARP,
+ or TCP.
+
+config RDS_RDMA
+ tristate "RDS over Infiniband and iWARP"
+ depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS
+ ---help---
+ Allow RDS to use Infiniband and iWARP as a transport.
+ This transport supports RDMA operations.
+
+config RDS_TCP
+ tristate "RDS over TCP"
+ depends on RDS
+ ---help---
+ Allow RDS to use TCP as a transport.
+ This transport does not support RDMA operations.
config RDS_DEBUG
- bool "Debugging messages"
+ bool "RDS debugging messages"
depends on RDS
default n
diff --git a/net/rds/Makefile b/net/rds/Makefile
index 51f2758..b46eca1 100644
--- a/net/rds/Makefile
+++ b/net/rds/Makefile
@@ -1,13 +1,20 @@
obj-$(CONFIG_RDS) += rds.o
rds-y := af_rds.o bind.o cong.o connection.o info.o message.o \
recv.o send.o stats.o sysctl.o threads.o transport.o \
- loop.o page.o rdma.o \
- rdma_transport.o \
+ loop.o page.o rdma.o
+
+obj-$(CONFIG_RDS_RDMA) += rds_rdma.o
+rds_rdma-objs := rdma_transport.o \
ib.o ib_cm.o ib_recv.o ib_ring.o ib_send.o ib_stats.o \
ib_sysctl.o ib_rdma.o \
iw.o iw_cm.o iw_recv.o iw_ring.o iw_send.o iw_stats.o \
iw_sysctl.o iw_rdma.o
+
+obj-$(CONFIG_RDS_TCP) += rds_tcp.o
+rds_tcp-objs := tcp.o tcp_connect.o tcp_listen.o tcp_recv.o \
+ tcp_send.o tcp_stats.o
+
ifeq ($(CONFIG_RDS_DEBUG), y)
EXTRA_CFLAGS += -DDEBUG
endif
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index b11e7e5..108ed2e 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -39,7 +39,6 @@
#include "rds.h"
#include "rdma.h"
-#include "rdma_transport.h"
/* this is just used for stats gathering :/ */
static DEFINE_SPINLOCK(rds_sock_lock);
@@ -509,7 +508,6 @@
static void __exit rds_exit(void)
{
- rds_rdma_exit();
sock_unregister(rds_family_ops.family);
proto_unregister(&rds_proto);
rds_conn_exit();
@@ -549,14 +547,8 @@
rds_info_register_func(RDS_INFO_SOCKETS, rds_sock_info);
rds_info_register_func(RDS_INFO_RECV_MESSAGES, rds_sock_inc_info);
- /* ib/iwarp transports currently compiled-in */
- ret = rds_rdma_init();
- if (ret)
- goto out_sock;
goto out;
-out_sock:
- sock_unregister(rds_family_ops.family);
out_proto:
proto_unregister(&rds_proto);
out_stats:
diff --git a/net/rds/bind.c b/net/rds/bind.c
index c17cc39..5d95fc0 100644
--- a/net/rds/bind.c
+++ b/net/rds/bind.c
@@ -187,6 +187,9 @@
if (trans == NULL) {
ret = -EADDRNOTAVAIL;
rds_remove_bound(rs);
+ if (printk_ratelimit())
+ printk(KERN_INFO "RDS: rds_bind() could not find a transport, "
+ "load rds_tcp or rds_rdma?\n");
goto out;
}
diff --git a/net/rds/cong.c b/net/rds/cong.c
index 710e459..dd2711d 100644
--- a/net/rds/cong.c
+++ b/net/rds/cong.c
@@ -254,6 +254,7 @@
read_unlock_irqrestore(&rds_cong_monitor_lock, flags);
}
}
+EXPORT_SYMBOL_GPL(rds_cong_map_updated);
int rds_cong_updated_since(unsigned long *recent)
{
diff --git a/net/rds/connection.c b/net/rds/connection.c
index d14445c..cc8b568 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -126,7 +126,7 @@
struct rds_transport *trans, gfp_t gfp,
int is_outgoing)
{
- struct rds_connection *conn, *tmp, *parent = NULL;
+ struct rds_connection *conn, *parent = NULL;
struct hlist_head *head = rds_conn_bucket(laddr, faddr);
unsigned long flags;
int ret;
@@ -155,7 +155,6 @@
}
INIT_HLIST_NODE(&conn->c_hash_node);
- conn->c_version = RDS_PROTOCOL_3_0;
conn->c_laddr = laddr;
conn->c_faddr = faddr;
spin_lock_init(&conn->c_lock);
@@ -211,26 +210,40 @@
trans->t_name ? trans->t_name : "[unknown]",
is_outgoing ? "(outgoing)" : "");
+ /*
+ * Since we ran without holding the conn lock, someone could
+ * have created the same conn (either normal or passive) in the
+ * interim. We check while holding the lock. If we won, we complete
+ * init and return our conn. If we lost, we rollback and return the
+ * other one.
+ */
spin_lock_irqsave(&rds_conn_lock, flags);
- if (parent == NULL) {
- tmp = rds_conn_lookup(head, laddr, faddr, trans);
- if (tmp == NULL)
- hlist_add_head(&conn->c_hash_node, head);
- } else {
- tmp = parent->c_passive;
- if (!tmp)
+ if (parent) {
+ /* Creating passive conn */
+ if (parent->c_passive) {
+ trans->conn_free(conn->c_transport_data);
+ kmem_cache_free(rds_conn_slab, conn);
+ conn = parent->c_passive;
+ } else {
parent->c_passive = conn;
- }
-
- if (tmp) {
- trans->conn_free(conn->c_transport_data);
- kmem_cache_free(rds_conn_slab, conn);
- conn = tmp;
+ rds_cong_add_conn(conn);
+ rds_conn_count++;
+ }
} else {
- rds_cong_add_conn(conn);
- rds_conn_count++;
- }
+ /* Creating normal conn */
+ struct rds_connection *found;
+ found = rds_conn_lookup(head, laddr, faddr, trans);
+ if (found) {
+ trans->conn_free(conn->c_transport_data);
+ kmem_cache_free(rds_conn_slab, conn);
+ conn = found;
+ } else {
+ hlist_add_head(&conn->c_hash_node, head);
+ rds_cong_add_conn(conn);
+ rds_conn_count++;
+ }
+ }
spin_unlock_irqrestore(&rds_conn_lock, flags);
out:
@@ -242,12 +255,14 @@
{
return __rds_conn_create(laddr, faddr, trans, gfp, 0);
}
+EXPORT_SYMBOL_GPL(rds_conn_create);
struct rds_connection *rds_conn_create_outgoing(__be32 laddr, __be32 faddr,
struct rds_transport *trans, gfp_t gfp)
{
return __rds_conn_create(laddr, faddr, trans, gfp, 1);
}
+EXPORT_SYMBOL_GPL(rds_conn_create_outgoing);
void rds_conn_destroy(struct rds_connection *conn)
{
@@ -290,6 +305,7 @@
rds_conn_count--;
}
+EXPORT_SYMBOL_GPL(rds_conn_destroy);
static void rds_conn_message_info(struct socket *sock, unsigned int len,
struct rds_info_iterator *iter,
@@ -393,6 +409,7 @@
spin_unlock_irqrestore(&rds_conn_lock, flags);
}
+EXPORT_SYMBOL_GPL(rds_for_each_conn_info);
static int rds_conn_info_visitor(struct rds_connection *conn,
void *buffer)
@@ -468,6 +485,7 @@
atomic_set(&conn->c_state, RDS_CONN_ERROR);
queue_work(rds_wq, &conn->c_down_w);
}
+EXPORT_SYMBOL_GPL(rds_conn_drop);
/*
* An error occurred on the connection
diff --git a/net/rds/ib.c b/net/rds/ib.c
index b9bcd32..536ebe5 100644
--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -43,11 +43,14 @@
unsigned int fmr_pool_size = RDS_FMR_POOL_SIZE;
unsigned int fmr_message_size = RDS_FMR_SIZE + 1; /* +1 allows for unaligned MRs */
+unsigned int rds_ib_retry_count = RDS_IB_DEFAULT_RETRY_COUNT;
module_param(fmr_pool_size, int, 0444);
MODULE_PARM_DESC(fmr_pool_size, " Max number of fmr per HCA");
module_param(fmr_message_size, int, 0444);
MODULE_PARM_DESC(fmr_message_size, " Max size of a RDMA transfer");
+module_param(rds_ib_retry_count, int, 0444);
+MODULE_PARM_DESC(rds_ib_retry_count, " Number of hw retries before reporting an error");
struct list_head rds_ib_devices;
@@ -82,9 +85,6 @@
rds_ibdev->max_wrs = dev_attr->max_qp_wr;
rds_ibdev->max_sge = min(dev_attr->max_sge, RDS_IB_MAX_SGE);
- rds_ibdev->fmr_page_shift = max(9, ffs(dev_attr->page_size_cap) - 1);
- rds_ibdev->fmr_page_size = 1 << rds_ibdev->fmr_page_shift;
- rds_ibdev->fmr_page_mask = ~((u64) rds_ibdev->fmr_page_size - 1);
rds_ibdev->fmr_max_remaps = dev_attr->max_map_per_fmr?: 32;
rds_ibdev->max_fmrs = dev_attr->max_fmr ?
min_t(unsigned int, dev_attr->max_fmr, fmr_pool_size) :
@@ -282,6 +282,7 @@
.flush_mrs = rds_ib_flush_mrs,
.t_owner = THIS_MODULE,
.t_name = "infiniband",
+ .t_type = RDS_TRANS_IB
};
int __init rds_ib_init(void)
diff --git a/net/rds/ib.h b/net/rds/ib.h
index 455ae73..1378b85 100644
--- a/net/rds/ib.h
+++ b/net/rds/ib.h
@@ -15,6 +15,8 @@
#define RDS_IB_DEFAULT_RECV_WR 1024
#define RDS_IB_DEFAULT_SEND_WR 256
+#define RDS_IB_DEFAULT_RETRY_COUNT 2
+
#define RDS_IB_SUPPORTED_PROTOCOLS 0x00000003 /* minor versions supported */
extern struct list_head rds_ib_devices;
@@ -157,9 +159,6 @@
struct ib_pd *pd;
struct ib_mr *mr;
struct rds_ib_mr_pool *mr_pool;
- int fmr_page_shift;
- int fmr_page_size;
- u64 fmr_page_mask;
unsigned int fmr_max_remaps;
unsigned int max_fmrs;
int max_sge;
@@ -247,6 +246,7 @@
extern unsigned int fmr_pool_size;
extern unsigned int fmr_message_size;
+extern unsigned int rds_ib_retry_count;
extern spinlock_t ib_nodev_conns_lock;
extern struct list_head ib_nodev_conns;
@@ -355,17 +355,25 @@
/*
* Helper functions for getting/setting the header and data SGEs in
* RDS packets (not RDMA)
+ *
+ * From version 3.1 onwards, header is in front of data in the sge.
*/
static inline struct ib_sge *
rds_ib_header_sge(struct rds_ib_connection *ic, struct ib_sge *sge)
{
- return &sge[0];
+ if (ic->conn->c_version > RDS_PROTOCOL_3_0)
+ return &sge[0];
+ else
+ return &sge[1];
}
static inline struct ib_sge *
rds_ib_data_sge(struct rds_ib_connection *ic, struct ib_sge *sge)
{
- return &sge[1];
+ if (ic->conn->c_version > RDS_PROTOCOL_3_0)
+ return &sge[1];
+ else
+ return &sge[0];
}
#endif
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index f8e40e1..c2d372f 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -98,21 +98,34 @@
struct ib_qp_attr qp_attr;
int err;
- if (event->param.conn.private_data_len) {
+ if (event->param.conn.private_data_len >= sizeof(*dp)) {
dp = event->param.conn.private_data;
- rds_ib_set_protocol(conn,
+ /* make sure it isn't empty data */
+ if (dp->dp_protocol_major) {
+ rds_ib_set_protocol(conn,
RDS_PROTOCOL(dp->dp_protocol_major,
- dp->dp_protocol_minor));
- rds_ib_set_flow_control(conn, be32_to_cpu(dp->dp_credit));
+ dp->dp_protocol_minor));
+ rds_ib_set_flow_control(conn, be32_to_cpu(dp->dp_credit));
+ }
}
printk(KERN_NOTICE "RDS/IB: connected to %pI4 version %u.%u%s\n",
- &conn->c_laddr,
+ &conn->c_faddr,
RDS_PROTOCOL_MAJOR(conn->c_version),
RDS_PROTOCOL_MINOR(conn->c_version),
ic->i_flowctl ? ", flow control" : "");
+ /*
+ * Init rings and fill recv. this needs to wait until protocol negotiation
+ * is complete, since ring layout is different from 3.0 to 3.1.
+ */
+ rds_ib_send_init_ring(ic);
+ rds_ib_recv_init_ring(ic);
+ /* Post receive buffers - as a side effect, this will update
+ * the posted credit count. */
+ rds_ib_recv_refill(conn, GFP_KERNEL, GFP_HIGHUSER, 1);
+
/* Tune RNR behavior */
rds_ib_tune_rnr(ic, &qp_attr);
@@ -145,7 +158,7 @@
/* XXX tune these? */
conn_param->responder_resources = 1;
conn_param->initiator_depth = 1;
- conn_param->retry_count = 7;
+ conn_param->retry_count = min_t(unsigned int, rds_ib_retry_count, 7);
conn_param->rnr_retry_count = 7;
if (dp) {
@@ -190,9 +203,9 @@
rdma_notify(ic->i_cm_id, IB_EVENT_COMM_EST);
break;
default:
- printk(KERN_WARNING "RDS/ib: unhandled QP event %u "
- "on connection to %pI4\n", event->event,
- &conn->c_faddr);
+ rds_ib_conn_error(conn, "RDS/IB: Fatal QP Event %u "
+ "- connection %pI4->%pI4, reconnecting\n",
+ event->event, &conn->c_laddr, &conn->c_faddr);
break;
}
}
@@ -321,7 +334,7 @@
rdsdebug("send allocation failed\n");
goto out;
}
- rds_ib_send_init_ring(ic);
+ memset(ic->i_sends, 0, ic->i_send_ring.w_nr * sizeof(struct rds_ib_send_work));
ic->i_recvs = vmalloc(ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work));
if (ic->i_recvs == NULL) {
@@ -329,14 +342,10 @@
rdsdebug("recv allocation failed\n");
goto out;
}
+ memset(ic->i_recvs, 0, ic->i_recv_ring.w_nr * sizeof(struct rds_ib_recv_work));
- rds_ib_recv_init_ring(ic);
rds_ib_recv_init_ack(ic);
- /* Post receive buffers - as a side effect, this will update
- * the posted credit count. */
- rds_ib_recv_refill(conn, GFP_KERNEL, GFP_HIGHUSER, 1);
-
rdsdebug("conn %p pd %p mr %p cq %p %p\n", conn, ic->i_pd, ic->i_mr,
ic->i_send_cq, ic->i_recv_cq);
@@ -344,19 +353,32 @@
return ret;
}
-static u32 rds_ib_protocol_compatible(const struct rds_ib_connect_private *dp)
+static u32 rds_ib_protocol_compatible(struct rdma_cm_event *event)
{
+ const struct rds_ib_connect_private *dp = event->param.conn.private_data;
u16 common;
u32 version = 0;
- /* rdma_cm private data is odd - when there is any private data in the
+ /*
+ * rdma_cm private data is odd - when there is any private data in the
* request, we will be given a pretty large buffer without telling us the
* original size. The only way to tell the difference is by looking at
* the contents, which are initialized to zero.
* If the protocol version fields aren't set, this is a connection attempt
* from an older version. This could could be 3.0 or 2.0 - we can't tell.
- * We really should have changed this for OFED 1.3 :-( */
- if (dp->dp_protocol_major == 0)
+ * We really should have changed this for OFED 1.3 :-(
+ */
+
+ /* Be paranoid. RDS always has privdata */
+ if (!event->param.conn.private_data_len) {
+ printk(KERN_NOTICE "RDS incoming connection has no private data, "
+ "rejecting\n");
+ return 0;
+ }
+
+ /* Even if len is crap *now* I still want to check it. -ASG */
+ if (event->param.conn.private_data_len < sizeof (*dp)
+ || dp->dp_protocol_major == 0)
return RDS_PROTOCOL_3_0;
common = be16_to_cpu(dp->dp_protocol_minor_mask) & RDS_IB_SUPPORTED_PROTOCOLS;
@@ -388,7 +410,7 @@
int err, destroy = 1;
/* Check whether the remote protocol version matches ours. */
- version = rds_ib_protocol_compatible(dp);
+ version = rds_ib_protocol_compatible(event);
if (!version)
goto out;
diff --git a/net/rds/ib_rdma.c b/net/rds/ib_rdma.c
index 81033af..ef3ab5b 100644
--- a/net/rds/ib_rdma.c
+++ b/net/rds/ib_rdma.c
@@ -211,7 +211,7 @@
pool->fmr_attr.max_pages = fmr_message_size;
pool->fmr_attr.max_maps = rds_ibdev->fmr_max_remaps;
- pool->fmr_attr.page_shift = rds_ibdev->fmr_page_shift;
+ pool->fmr_attr.page_shift = PAGE_SHIFT;
pool->max_free_pinned = rds_ibdev->max_fmrs * fmr_message_size / 4;
/* We never allow more than max_items MRs to be allocated.
@@ -349,13 +349,13 @@
unsigned int dma_len = ib_sg_dma_len(dev, &scat[i]);
u64 dma_addr = ib_sg_dma_address(dev, &scat[i]);
- if (dma_addr & ~rds_ibdev->fmr_page_mask) {
+ if (dma_addr & ~PAGE_MASK) {
if (i > 0)
return -EINVAL;
else
++page_cnt;
}
- if ((dma_addr + dma_len) & ~rds_ibdev->fmr_page_mask) {
+ if ((dma_addr + dma_len) & ~PAGE_MASK) {
if (i < sg_dma_len - 1)
return -EINVAL;
else
@@ -365,7 +365,7 @@
len += dma_len;
}
- page_cnt += len >> rds_ibdev->fmr_page_shift;
+ page_cnt += len >> PAGE_SHIFT;
if (page_cnt > fmr_message_size)
return -EINVAL;
@@ -378,9 +378,9 @@
unsigned int dma_len = ib_sg_dma_len(dev, &scat[i]);
u64 dma_addr = ib_sg_dma_address(dev, &scat[i]);
- for (j = 0; j < dma_len; j += rds_ibdev->fmr_page_size)
+ for (j = 0; j < dma_len; j += PAGE_SIZE)
dma_pages[page_cnt++] =
- (dma_addr & rds_ibdev->fmr_page_mask) + j;
+ (dma_addr & PAGE_MASK) + j;
}
ret = ib_map_phys_fmr(ibmr->fmr,
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index 5709bad..cd7a6cf 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -555,6 +555,47 @@
return rds_ib_get_ack(ic);
}
+static struct rds_header *rds_ib_get_header(struct rds_connection *conn,
+ struct rds_ib_recv_work *recv,
+ u32 data_len)
+{
+ struct rds_ib_connection *ic = conn->c_transport_data;
+ void *hdr_buff = &ic->i_recv_hdrs[recv - ic->i_recvs];
+ void *addr;
+ u32 misplaced_hdr_bytes;
+
+ /*
+ * Support header at the front (RDS 3.1+) as well as header-at-end.
+ *
+ * Cases:
+ * 1) header all in header buff (great!)
+ * 2) header all in data page (copy all to header buff)
+ * 3) header split across hdr buf + data page
+ * (move bit in hdr buff to end before copying other bit from data page)
+ */
+ if (conn->c_version > RDS_PROTOCOL_3_0 || data_len == RDS_FRAG_SIZE)
+ return hdr_buff;
+
+ if (data_len <= (RDS_FRAG_SIZE - sizeof(struct rds_header))) {
+ addr = kmap_atomic(recv->r_frag->f_page, KM_SOFTIRQ0);
+ memcpy(hdr_buff,
+ addr + recv->r_frag->f_offset + data_len,
+ sizeof(struct rds_header));
+ kunmap_atomic(addr, KM_SOFTIRQ0);
+ return hdr_buff;
+ }
+
+ misplaced_hdr_bytes = (sizeof(struct rds_header) - (RDS_FRAG_SIZE - data_len));
+
+ memmove(hdr_buff + misplaced_hdr_bytes, hdr_buff, misplaced_hdr_bytes);
+
+ addr = kmap_atomic(recv->r_frag->f_page, KM_SOFTIRQ0);
+ memcpy(hdr_buff, addr + recv->r_frag->f_offset + data_len,
+ sizeof(struct rds_header) - misplaced_hdr_bytes);
+ kunmap_atomic(addr, KM_SOFTIRQ0);
+ return hdr_buff;
+}
+
/*
* It's kind of lame that we're copying from the posted receive pages into
* long-lived bitmaps. We could have posted the bitmaps and rdma written into
@@ -645,7 +686,7 @@
};
static void rds_ib_process_recv(struct rds_connection *conn,
- struct rds_ib_recv_work *recv, u32 byte_len,
+ struct rds_ib_recv_work *recv, u32 data_len,
struct rds_ib_ack_state *state)
{
struct rds_ib_connection *ic = conn->c_transport_data;
@@ -655,9 +696,9 @@
/* XXX shut down the connection if port 0,0 are seen? */
rdsdebug("ic %p ibinc %p recv %p byte len %u\n", ic, ibinc, recv,
- byte_len);
+ data_len);
- if (byte_len < sizeof(struct rds_header)) {
+ if (data_len < sizeof(struct rds_header)) {
rds_ib_conn_error(conn, "incoming message "
"from %pI4 didn't inclue a "
"header, disconnecting and "
@@ -665,9 +706,9 @@
&conn->c_faddr);
return;
}
- byte_len -= sizeof(struct rds_header);
+ data_len -= sizeof(struct rds_header);
- ihdr = &ic->i_recv_hdrs[recv - ic->i_recvs];
+ ihdr = rds_ib_get_header(conn, recv, data_len);
/* Validate the checksum. */
if (!rds_message_verify_checksum(ihdr)) {
@@ -687,7 +728,7 @@
if (ihdr->h_credit)
rds_ib_send_add_credits(conn, ihdr->h_credit);
- if (ihdr->h_sport == 0 && ihdr->h_dport == 0 && byte_len == 0) {
+ if (ihdr->h_sport == 0 && ihdr->h_dport == 0 && data_len == 0) {
/* This is an ACK-only packet. The fact that it gets
* special treatment here is that historically, ACKs
* were rather special beasts.
diff --git a/net/rds/ib_stats.c b/net/rds/ib_stats.c
index 02e3e3d..8d84883 100644
--- a/net/rds/ib_stats.c
+++ b/net/rds/ib_stats.c
@@ -39,7 +39,7 @@
DEFINE_PER_CPU(struct rds_ib_statistics, rds_ib_stats) ____cacheline_aligned;
-static char *rds_ib_stat_names[] = {
+static const char *const rds_ib_stat_names[] = {
"ib_connect_raced",
"ib_listen_closed_stale",
"ib_tx_cq_call",
diff --git a/net/rds/ib_sysctl.c b/net/rds/ib_sysctl.c
index d87830d..84b5ffcb 100644
--- a/net/rds/ib_sysctl.c
+++ b/net/rds/ib_sysctl.c
@@ -53,7 +53,17 @@
static unsigned long rds_ib_sysctl_max_unsig_bytes_min = 1;
static unsigned long rds_ib_sysctl_max_unsig_bytes_max = ~0UL;
-unsigned int rds_ib_sysctl_flow_control = 1;
+/*
+ * This sysctl does nothing.
+ *
+ * Backwards compatibility with RDS 3.0 wire protocol
+ * disables initial FC credit exchange.
+ * If it's ever possible to drop 3.0 support,
+ * setting this to 1 and moving init/refill of send/recv
+ * rings from ib_cm_connect_complete() back into ib_setup_qp()
+ * will cause credits to be added before protocol negotiation.
+ */
+unsigned int rds_ib_sysctl_flow_control = 0;
ctl_table rds_ib_sysctl_table[] = {
{
diff --git a/net/rds/info.c b/net/rds/info.c
index 62aeef3..814a91a 100644
--- a/net/rds/info.c
+++ b/net/rds/info.c
@@ -79,6 +79,7 @@
rds_info_funcs[offset] = func;
spin_unlock(&rds_info_lock);
}
+EXPORT_SYMBOL_GPL(rds_info_register_func);
void rds_info_deregister_func(int optname, rds_info_func func)
{
@@ -91,6 +92,7 @@
rds_info_funcs[offset] = NULL;
spin_unlock(&rds_info_lock);
}
+EXPORT_SYMBOL_GPL(rds_info_deregister_func);
/*
* Typically we hold an atomic kmap across multiple rds_info_copy() calls
@@ -137,6 +139,7 @@
}
}
}
+EXPORT_SYMBOL_GPL(rds_info_copy);
/*
* @optval points to the userspace buffer that the information snapshot
diff --git a/net/rds/iw.c b/net/rds/iw.c
index d16e1cb..db224f7 100644
--- a/net/rds/iw.c
+++ b/net/rds/iw.c
@@ -83,23 +83,16 @@
rds_iwdev->max_wrs = dev_attr->max_qp_wr;
rds_iwdev->max_sge = min(dev_attr->max_sge, RDS_IW_MAX_SGE);
- rds_iwdev->page_shift = max(PAGE_SHIFT, ffs(dev_attr->page_size_cap) - 1);
-
rds_iwdev->dev = device;
rds_iwdev->pd = ib_alloc_pd(device);
if (IS_ERR(rds_iwdev->pd))
goto free_dev;
if (!rds_iwdev->dma_local_lkey) {
- if (device->node_type != RDMA_NODE_RNIC) {
- rds_iwdev->mr = ib_get_dma_mr(rds_iwdev->pd,
- IB_ACCESS_LOCAL_WRITE);
- } else {
- rds_iwdev->mr = ib_get_dma_mr(rds_iwdev->pd,
- IB_ACCESS_REMOTE_READ |
- IB_ACCESS_REMOTE_WRITE |
- IB_ACCESS_LOCAL_WRITE);
- }
+ rds_iwdev->mr = ib_get_dma_mr(rds_iwdev->pd,
+ IB_ACCESS_REMOTE_READ |
+ IB_ACCESS_REMOTE_WRITE |
+ IB_ACCESS_LOCAL_WRITE);
if (IS_ERR(rds_iwdev->mr))
goto err_pd;
} else
@@ -291,6 +284,7 @@
.flush_mrs = rds_iw_flush_mrs,
.t_owner = THIS_MODULE,
.t_name = "iwarp",
+ .t_type = RDS_TRANS_IWARP,
.t_prefer_loopback = 1,
};
diff --git a/net/rds/iw.h b/net/rds/iw.h
index 0715dde..dd72b62 100644
--- a/net/rds/iw.h
+++ b/net/rds/iw.h
@@ -181,7 +181,6 @@
struct ib_pd *pd;
struct ib_mr *mr;
struct rds_iw_mr_pool *mr_pool;
- int page_shift;
int max_sge;
unsigned int max_wrs;
unsigned int dma_local_lkey:1;
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index dcdb37d..de4a1b1 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -263,18 +263,12 @@
}
static u64 *rds_iw_map_scatterlist(struct rds_iw_device *rds_iwdev,
- struct rds_iw_scatterlist *sg,
- unsigned int dma_page_shift)
+ struct rds_iw_scatterlist *sg)
{
struct ib_device *dev = rds_iwdev->dev;
u64 *dma_pages = NULL;
- u64 dma_mask;
- unsigned int dma_page_size;
int i, j, ret;
- dma_page_size = 1 << dma_page_shift;
- dma_mask = dma_page_size - 1;
-
WARN_ON(sg->dma_len);
sg->dma_len = ib_dma_map_sg(dev, sg->list, sg->len, DMA_BIDIRECTIONAL);
@@ -295,18 +289,18 @@
sg->bytes += dma_len;
end_addr = dma_addr + dma_len;
- if (dma_addr & dma_mask) {
+ if (dma_addr & PAGE_MASK) {
if (i > 0)
goto out_unmap;
- dma_addr &= ~dma_mask;
+ dma_addr &= ~PAGE_MASK;
}
- if (end_addr & dma_mask) {
+ if (end_addr & PAGE_MASK) {
if (i < sg->dma_len - 1)
goto out_unmap;
- end_addr = (end_addr + dma_mask) & ~dma_mask;
+ end_addr = (end_addr + PAGE_MASK) & ~PAGE_MASK;
}
- sg->dma_npages += (end_addr - dma_addr) >> dma_page_shift;
+ sg->dma_npages += (end_addr - dma_addr) >> PAGE_SHIFT;
}
/* Now gather the dma addrs into one list */
@@ -325,8 +319,8 @@
u64 end_addr;
end_addr = dma_addr + dma_len;
- dma_addr &= ~dma_mask;
- for (; dma_addr < end_addr; dma_addr += dma_page_size)
+ dma_addr &= ~PAGE_MASK;
+ for (; dma_addr < end_addr; dma_addr += PAGE_SIZE)
dma_pages[j++] = dma_addr;
BUG_ON(j > sg->dma_npages);
}
@@ -727,7 +721,7 @@
f_wr.wr.fast_reg.rkey = mapping->m_rkey;
f_wr.wr.fast_reg.page_list = ibmr->page_list;
f_wr.wr.fast_reg.page_list_len = mapping->m_sg.dma_len;
- f_wr.wr.fast_reg.page_shift = ibmr->device->page_shift;
+ f_wr.wr.fast_reg.page_shift = PAGE_SHIFT;
f_wr.wr.fast_reg.access_flags = IB_ACCESS_LOCAL_WRITE |
IB_ACCESS_REMOTE_READ |
IB_ACCESS_REMOTE_WRITE;
@@ -780,9 +774,7 @@
rds_iw_set_scatterlist(&mapping->m_sg, sg, sg_len);
- dma_pages = rds_iw_map_scatterlist(rds_iwdev,
- &mapping->m_sg,
- rds_iwdev->page_shift);
+ dma_pages = rds_iw_map_scatterlist(rds_iwdev, &mapping->m_sg);
if (IS_ERR(dma_pages)) {
ret = PTR_ERR(dma_pages);
dma_pages = NULL;
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 44a6a05..1f5abe3 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -779,7 +779,7 @@
send->s_wr.wr.fast_reg.rkey = send->s_mr->rkey;
send->s_wr.wr.fast_reg.page_list = send->s_page_list;
send->s_wr.wr.fast_reg.page_list_len = nent;
- send->s_wr.wr.fast_reg.page_shift = rds_iwdev->page_shift;
+ send->s_wr.wr.fast_reg.page_shift = PAGE_SHIFT;
send->s_wr.wr.fast_reg.access_flags = IB_ACCESS_REMOTE_WRITE;
send->s_wr.wr.fast_reg.iova_start = sg_addr;
diff --git a/net/rds/iw_stats.c b/net/rds/iw_stats.c
index ccc7e8f..d33ea79 100644
--- a/net/rds/iw_stats.c
+++ b/net/rds/iw_stats.c
@@ -39,7 +39,7 @@
DEFINE_PER_CPU(struct rds_iw_statistics, rds_iw_stats) ____cacheline_aligned;
-static char *rds_iw_stat_names[] = {
+static const char *const rds_iw_stat_names[] = {
"iw_connect_raced",
"iw_listen_closed_stale",
"iw_tx_cq_call",
diff --git a/net/rds/message.c b/net/rds/message.c
index 5a15dc8..ca50a8e 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -50,6 +50,7 @@
rdsdebug("addref rm %p ref %d\n", rm, atomic_read(&rm->m_refcount));
atomic_inc(&rm->m_refcount);
}
+EXPORT_SYMBOL_GPL(rds_message_addref);
/*
* This relies on dma_map_sg() not touching sg[].page during merging.
@@ -92,6 +93,7 @@
kfree(rm);
}
}
+EXPORT_SYMBOL_GPL(rds_message_put);
void rds_message_inc_free(struct rds_incoming *inc)
{
@@ -108,6 +110,7 @@
hdr->h_sequence = cpu_to_be64(seq);
hdr->h_exthdr[0] = RDS_EXTHDR_NONE;
}
+EXPORT_SYMBOL_GPL(rds_message_populate_header);
int rds_message_add_extension(struct rds_header *hdr,
unsigned int type, const void *data, unsigned int len)
@@ -133,6 +136,7 @@
dst[len] = RDS_EXTHDR_NONE;
return 1;
}
+EXPORT_SYMBOL_GPL(rds_message_add_extension);
/*
* If a message has extension headers, retrieve them here.
@@ -208,6 +212,7 @@
ext_hdr.h_rdma_offset = cpu_to_be32(offset);
return rds_message_add_extension(hdr, RDS_EXTHDR_RDMA_DEST, &ext_hdr, sizeof(ext_hdr));
}
+EXPORT_SYMBOL_GPL(rds_message_add_rdma_dest_extension);
struct rds_message *rds_message_alloc(unsigned int nents, gfp_t gfp)
{
@@ -399,4 +404,5 @@
if (waitqueue_active(&rds_message_flush_waitq))
wake_up(&rds_message_flush_waitq);
}
+EXPORT_SYMBOL_GPL(rds_message_unmapped);
diff --git a/net/rds/page.c b/net/rds/page.c
index c460743..55c21ef 100644
--- a/net/rds/page.c
+++ b/net/rds/page.c
@@ -81,6 +81,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(rds_page_copy_user);
/*
* Message allocation uses this to build up regions of a message.
diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c
index 7d0f901..9ece910 100644
--- a/net/rds/rdma_transport.c
+++ b/net/rds/rdma_transport.c
@@ -101,7 +101,7 @@
break;
case RDMA_CM_EVENT_DISCONNECTED:
- printk(KERN_WARNING "RDS/IW: DISCONNECT event - dropping connection "
+ printk(KERN_WARNING "RDS/RDMA: DISCONNECT event - dropping connection "
"%pI4->%pI4\n", &conn->c_laddr,
&conn->c_faddr);
rds_conn_drop(conn);
@@ -132,12 +132,12 @@
cm_id = rdma_create_id(rds_rdma_cm_event_handler, NULL, RDMA_PS_TCP);
if (IS_ERR(cm_id)) {
ret = PTR_ERR(cm_id);
- printk(KERN_ERR "RDS/IW: failed to setup listener, "
+ printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
"rdma_create_id() returned %d\n", ret);
goto out;
}
- sin.sin_family = PF_INET,
+ sin.sin_family = AF_INET,
sin.sin_addr.s_addr = (__force u32)htonl(INADDR_ANY);
sin.sin_port = (__force u16)htons(RDS_PORT);
@@ -147,14 +147,14 @@
*/
ret = rdma_bind_addr(cm_id, (struct sockaddr *)&sin);
if (ret) {
- printk(KERN_ERR "RDS/IW: failed to setup listener, "
+ printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
"rdma_bind_addr() returned %d\n", ret);
goto out;
}
ret = rdma_listen(cm_id, 128);
if (ret) {
- printk(KERN_ERR "RDS/IW: failed to setup listener, "
+ printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
"rdma_listen() returned %d\n", ret);
goto out;
}
@@ -203,6 +203,7 @@
out:
return ret;
}
+module_init(rds_rdma_init);
void rds_rdma_exit(void)
{
@@ -211,4 +212,9 @@
rds_ib_exit();
rds_iw_exit();
}
+module_exit(rds_rdma_exit);
+
+MODULE_AUTHOR("Oracle Corporation <rds-devel@oss.oracle.com>");
+MODULE_DESCRIPTION("RDS: IB/iWARP transport");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/net/rds/rds.h b/net/rds/rds.h
index dbe1112..85d6f89 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -311,11 +311,17 @@
* flag and header.
*/
+#define RDS_TRANS_IB 0
+#define RDS_TRANS_IWARP 1
+#define RDS_TRANS_TCP 2
+#define RDS_TRANS_COUNT 3
+
struct rds_transport {
char t_name[TRANSNAMSIZ];
struct list_head t_item;
struct module *t_owner;
unsigned int t_prefer_loopback:1;
+ unsigned int t_type;
int (*laddr_check)(__be32 addr);
int (*conn_alloc)(struct rds_connection *conn, gfp_t gfp);
@@ -652,7 +658,8 @@
int __init rds_stats_init(void);
void rds_stats_exit(void);
void rds_stats_info_copy(struct rds_info_iterator *iter,
- uint64_t *values, char **names, size_t nr);
+ uint64_t *values, const char *const *names,
+ size_t nr);
/* sysctl.c */
int __init rds_sysctl_init(void);
diff --git a/net/rds/recv.c b/net/rds/recv.c
index f2118c5..fdff33c 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -46,12 +46,14 @@
inc->i_saddr = saddr;
inc->i_rdma_cookie = 0;
}
+EXPORT_SYMBOL_GPL(rds_inc_init);
void rds_inc_addref(struct rds_incoming *inc)
{
rdsdebug("addref inc %p ref %d\n", inc, atomic_read(&inc->i_refcount));
atomic_inc(&inc->i_refcount);
}
+EXPORT_SYMBOL_GPL(rds_inc_addref);
void rds_inc_put(struct rds_incoming *inc)
{
@@ -62,6 +64,7 @@
inc->i_conn->c_trans->inc_free(inc);
}
}
+EXPORT_SYMBOL_GPL(rds_inc_put);
static void rds_recv_rcvbuf_delta(struct rds_sock *rs, struct sock *sk,
struct rds_cong_map *map,
@@ -237,6 +240,7 @@
if (rs)
rds_sock_put(rs);
}
+EXPORT_SYMBOL_GPL(rds_recv_incoming);
/*
* be very careful here. This is being called as the condition in
@@ -409,18 +413,18 @@
if (msg_flags & MSG_OOB)
goto out;
- /* If there are pending notifications, do those - and nothing else */
- if (!list_empty(&rs->rs_notify_queue)) {
- ret = rds_notify_queue_get(rs, msg);
- goto out;
- }
-
- if (rs->rs_cong_notify) {
- ret = rds_notify_cong(rs, msg);
- goto out;
- }
-
while (1) {
+ /* If there are pending notifications, do those - and nothing else */
+ if (!list_empty(&rs->rs_notify_queue)) {
+ ret = rds_notify_queue_get(rs, msg);
+ break;
+ }
+
+ if (rs->rs_cong_notify) {
+ ret = rds_notify_cong(rs, msg);
+ break;
+ }
+
if (!rds_next_incoming(rs, &inc)) {
if (nonblock) {
ret = -EAGAIN;
@@ -428,7 +432,9 @@
}
timeo = wait_event_interruptible_timeout(*sk->sk_sleep,
- rds_next_incoming(rs, &inc),
+ (!list_empty(&rs->rs_notify_queue)
+ || rs->rs_cong_notify
+ || rds_next_incoming(rs, &inc)),
timeo);
rdsdebug("recvmsg woke inc %p timeo %ld\n", inc,
timeo);
diff --git a/net/rds/send.c b/net/rds/send.c
index a4a7f42..28c88ff 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -439,6 +439,7 @@
sock_put(rds_rs_to_sk(rs));
}
}
+EXPORT_SYMBOL_GPL(rds_rdma_send_complete);
/*
* This is the same as rds_rdma_send_complete except we
@@ -494,6 +495,7 @@
return found;
}
+EXPORT_SYMBOL_GPL(rds_send_get_message);
/*
* This removes messages from the socket's list if they're on it. The list
@@ -610,6 +612,7 @@
/* now remove the messages from the sock list as needed */
rds_send_remove_from_sock(&list, RDS_RDMA_SUCCESS);
}
+EXPORT_SYMBOL_GPL(rds_send_drop_acked);
void rds_send_drop_to(struct rds_sock *rs, struct sockaddr_in *dest)
{
diff --git a/net/rds/stats.c b/net/rds/stats.c
index 6371468..7598eb0 100644
--- a/net/rds/stats.c
+++ b/net/rds/stats.c
@@ -37,10 +37,11 @@
#include "rds.h"
DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats);
+EXPORT_PER_CPU_SYMBOL_GPL(rds_stats);
/* :.,$s/unsigned long\>.*\<s_\(.*\);/"\1",/g */
-static char *rds_stat_names[] = {
+static const char *const rds_stat_names[] = {
"conn_reset",
"recv_drop_bad_checksum",
"recv_drop_old_seq",
@@ -77,7 +78,7 @@
};
void rds_stats_info_copy(struct rds_info_iterator *iter,
- uint64_t *values, char **names, size_t nr)
+ uint64_t *values, const char *const *names, size_t nr)
{
struct rds_info_counter ctr;
size_t i;
@@ -90,6 +91,7 @@
rds_info_copy(iter, &ctr, sizeof(ctr));
}
}
+EXPORT_SYMBOL_GPL(rds_stats_info_copy);
/*
* This gives global counters across all the transports. The strings
diff --git a/net/rds/tcp.c b/net/rds/tcp.c
new file mode 100644
index 0000000..b5198ae
--- /dev/null
+++ b/net/rds/tcp.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (c) 2006 Oracle. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/in.h>
+#include <net/tcp.h>
+
+#include "rds.h"
+#include "tcp.h"
+
+/* only for info exporting */
+static DEFINE_SPINLOCK(rds_tcp_tc_list_lock);
+static LIST_HEAD(rds_tcp_tc_list);
+unsigned int rds_tcp_tc_count;
+
+/* Track rds_tcp_connection structs so they can be cleaned up */
+static DEFINE_SPINLOCK(rds_tcp_conn_lock);
+static LIST_HEAD(rds_tcp_conn_list);
+
+static struct kmem_cache *rds_tcp_conn_slab;
+
+#define RDS_TCP_DEFAULT_BUFSIZE (128 * 1024)
+
+/* doing it this way avoids calling tcp_sk() */
+void rds_tcp_nonagle(struct socket *sock)
+{
+ mm_segment_t oldfs = get_fs();
+ int val = 1;
+
+ set_fs(KERNEL_DS);
+ sock->ops->setsockopt(sock, SOL_TCP, TCP_NODELAY, (char __user *)&val,
+ sizeof(val));
+ set_fs(oldfs);
+}
+
+void rds_tcp_tune(struct socket *sock)
+{
+ struct sock *sk = sock->sk;
+
+ rds_tcp_nonagle(sock);
+
+ /*
+ * We're trying to saturate gigabit with the default,
+ * see svc_sock_setbufsize().
+ */
+ lock_sock(sk);
+ sk->sk_sndbuf = RDS_TCP_DEFAULT_BUFSIZE;
+ sk->sk_rcvbuf = RDS_TCP_DEFAULT_BUFSIZE;
+ sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
+ release_sock(sk);
+}
+
+u32 rds_tcp_snd_nxt(struct rds_tcp_connection *tc)
+{
+ return tcp_sk(tc->t_sock->sk)->snd_nxt;
+}
+
+u32 rds_tcp_snd_una(struct rds_tcp_connection *tc)
+{
+ return tcp_sk(tc->t_sock->sk)->snd_una;
+}
+
+void rds_tcp_restore_callbacks(struct socket *sock,
+ struct rds_tcp_connection *tc)
+{
+ rdsdebug("restoring sock %p callbacks from tc %p\n", sock, tc);
+ write_lock_bh(&sock->sk->sk_callback_lock);
+
+ /* done under the callback_lock to serialize with write_space */
+ spin_lock(&rds_tcp_tc_list_lock);
+ list_del_init(&tc->t_list_item);
+ rds_tcp_tc_count--;
+ spin_unlock(&rds_tcp_tc_list_lock);
+
+ tc->t_sock = NULL;
+
+ sock->sk->sk_write_space = tc->t_orig_write_space;
+ sock->sk->sk_data_ready = tc->t_orig_data_ready;
+ sock->sk->sk_state_change = tc->t_orig_state_change;
+ sock->sk->sk_user_data = NULL;
+
+ write_unlock_bh(&sock->sk->sk_callback_lock);
+}
+
+/*
+ * This is the only path that sets tc->t_sock. Send and receive trust that
+ * it is set. The RDS_CONN_CONNECTED bit protects those paths from being
+ * called while it isn't set.
+ */
+void rds_tcp_set_callbacks(struct socket *sock, struct rds_connection *conn)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+
+ rdsdebug("setting sock %p callbacks to tc %p\n", sock, tc);
+ write_lock_bh(&sock->sk->sk_callback_lock);
+
+ /* done under the callback_lock to serialize with write_space */
+ spin_lock(&rds_tcp_tc_list_lock);
+ list_add_tail(&tc->t_list_item, &rds_tcp_tc_list);
+ rds_tcp_tc_count++;
+ spin_unlock(&rds_tcp_tc_list_lock);
+
+ /* accepted sockets need our listen data ready undone */
+ if (sock->sk->sk_data_ready == rds_tcp_listen_data_ready)
+ sock->sk->sk_data_ready = sock->sk->sk_user_data;
+
+ tc->t_sock = sock;
+ tc->conn = conn;
+ tc->t_orig_data_ready = sock->sk->sk_data_ready;
+ tc->t_orig_write_space = sock->sk->sk_write_space;
+ tc->t_orig_state_change = sock->sk->sk_state_change;
+
+ sock->sk->sk_user_data = conn;
+ sock->sk->sk_data_ready = rds_tcp_data_ready;
+ sock->sk->sk_write_space = rds_tcp_write_space;
+ sock->sk->sk_state_change = rds_tcp_state_change;
+
+ write_unlock_bh(&sock->sk->sk_callback_lock);
+}
+
+static void rds_tcp_tc_info(struct socket *sock, unsigned int len,
+ struct rds_info_iterator *iter,
+ struct rds_info_lengths *lens)
+{
+ struct rds_info_tcp_socket tsinfo;
+ struct rds_tcp_connection *tc;
+ unsigned long flags;
+ struct sockaddr_in sin;
+ int sinlen;
+
+ spin_lock_irqsave(&rds_tcp_tc_list_lock, flags);
+
+ if (len / sizeof(tsinfo) < rds_tcp_tc_count)
+ goto out;
+
+ list_for_each_entry(tc, &rds_tcp_tc_list, t_list_item) {
+
+ sock->ops->getname(sock, (struct sockaddr *)&sin, &sinlen, 0);
+ tsinfo.local_addr = sin.sin_addr.s_addr;
+ tsinfo.local_port = sin.sin_port;
+ sock->ops->getname(sock, (struct sockaddr *)&sin, &sinlen, 1);
+ tsinfo.peer_addr = sin.sin_addr.s_addr;
+ tsinfo.peer_port = sin.sin_port;
+
+ tsinfo.hdr_rem = tc->t_tinc_hdr_rem;
+ tsinfo.data_rem = tc->t_tinc_data_rem;
+ tsinfo.last_sent_nxt = tc->t_last_sent_nxt;
+ tsinfo.last_expected_una = tc->t_last_expected_una;
+ tsinfo.last_seen_una = tc->t_last_seen_una;
+
+ rds_info_copy(iter, &tsinfo, sizeof(tsinfo));
+ }
+
+out:
+ lens->nr = rds_tcp_tc_count;
+ lens->each = sizeof(tsinfo);
+
+ spin_unlock_irqrestore(&rds_tcp_tc_list_lock, flags);
+}
+
+static int rds_tcp_laddr_check(__be32 addr)
+{
+ if (inet_addr_type(&init_net, addr) == RTN_LOCAL)
+ return 0;
+ return -EADDRNOTAVAIL;
+}
+
+static int rds_tcp_conn_alloc(struct rds_connection *conn, gfp_t gfp)
+{
+ struct rds_tcp_connection *tc;
+
+ tc = kmem_cache_alloc(rds_tcp_conn_slab, gfp);
+ if (tc == NULL)
+ return -ENOMEM;
+
+ tc->t_sock = NULL;
+ tc->t_tinc = NULL;
+ tc->t_tinc_hdr_rem = sizeof(struct rds_header);
+ tc->t_tinc_data_rem = 0;
+
+ conn->c_transport_data = tc;
+
+ spin_lock_irq(&rds_tcp_conn_lock);
+ list_add_tail(&tc->t_tcp_node, &rds_tcp_conn_list);
+ spin_unlock_irq(&rds_tcp_conn_lock);
+
+ rdsdebug("alloced tc %p\n", conn->c_transport_data);
+ return 0;
+}
+
+static void rds_tcp_conn_free(void *arg)
+{
+ struct rds_tcp_connection *tc = arg;
+ rdsdebug("freeing tc %p\n", tc);
+ kmem_cache_free(rds_tcp_conn_slab, tc);
+}
+
+static void rds_tcp_destroy_conns(void)
+{
+ struct rds_tcp_connection *tc, *_tc;
+ LIST_HEAD(tmp_list);
+
+ /* avoid calling conn_destroy with irqs off */
+ spin_lock_irq(&rds_tcp_conn_lock);
+ list_splice(&rds_tcp_conn_list, &tmp_list);
+ INIT_LIST_HEAD(&rds_tcp_conn_list);
+ spin_unlock_irq(&rds_tcp_conn_lock);
+
+ list_for_each_entry_safe(tc, _tc, &tmp_list, t_tcp_node) {
+ if (tc->conn->c_passive)
+ rds_conn_destroy(tc->conn->c_passive);
+ rds_conn_destroy(tc->conn);
+ }
+}
+
+void rds_tcp_exit(void)
+{
+ rds_info_deregister_func(RDS_INFO_TCP_SOCKETS, rds_tcp_tc_info);
+ rds_tcp_listen_stop();
+ rds_tcp_destroy_conns();
+ rds_trans_unregister(&rds_tcp_transport);
+ rds_tcp_recv_exit();
+ kmem_cache_destroy(rds_tcp_conn_slab);
+}
+module_exit(rds_tcp_exit);
+
+struct rds_transport rds_tcp_transport = {
+ .laddr_check = rds_tcp_laddr_check,
+ .xmit_prepare = rds_tcp_xmit_prepare,
+ .xmit_complete = rds_tcp_xmit_complete,
+ .xmit_cong_map = rds_tcp_xmit_cong_map,
+ .xmit = rds_tcp_xmit,
+ .recv = rds_tcp_recv,
+ .conn_alloc = rds_tcp_conn_alloc,
+ .conn_free = rds_tcp_conn_free,
+ .conn_connect = rds_tcp_conn_connect,
+ .conn_shutdown = rds_tcp_conn_shutdown,
+ .inc_copy_to_user = rds_tcp_inc_copy_to_user,
+ .inc_purge = rds_tcp_inc_purge,
+ .inc_free = rds_tcp_inc_free,
+ .stats_info_copy = rds_tcp_stats_info_copy,
+ .exit = rds_tcp_exit,
+ .t_owner = THIS_MODULE,
+ .t_name = "tcp",
+ .t_type = RDS_TRANS_TCP,
+ .t_prefer_loopback = 1,
+};
+
+int __init rds_tcp_init(void)
+{
+ int ret;
+
+ rds_tcp_conn_slab = kmem_cache_create("rds_tcp_connection",
+ sizeof(struct rds_tcp_connection),
+ 0, 0, NULL);
+ if (rds_tcp_conn_slab == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = rds_tcp_recv_init();
+ if (ret)
+ goto out_slab;
+
+ ret = rds_trans_register(&rds_tcp_transport);
+ if (ret)
+ goto out_recv;
+
+ ret = rds_tcp_listen_init();
+ if (ret)
+ goto out_register;
+
+ rds_info_register_func(RDS_INFO_TCP_SOCKETS, rds_tcp_tc_info);
+
+ goto out;
+
+out_register:
+ rds_trans_unregister(&rds_tcp_transport);
+out_recv:
+ rds_tcp_recv_exit();
+out_slab:
+ kmem_cache_destroy(rds_tcp_conn_slab);
+out:
+ return ret;
+}
+module_init(rds_tcp_init);
+
+MODULE_AUTHOR("Oracle Corporation <rds-devel@oss.oracle.com>");
+MODULE_DESCRIPTION("RDS: TCP transport");
+MODULE_LICENSE("Dual BSD/GPL");
+
diff --git a/net/rds/tcp.h b/net/rds/tcp.h
new file mode 100644
index 0000000..844fa6b
--- /dev/null
+++ b/net/rds/tcp.h
@@ -0,0 +1,93 @@
+#ifndef _RDS_TCP_H
+#define _RDS_TCP_H
+
+#define RDS_TCP_PORT 16385
+
+struct rds_tcp_incoming {
+ struct rds_incoming ti_inc;
+ struct sk_buff_head ti_skb_list;
+};
+
+struct rds_tcp_connection {
+
+ struct list_head t_tcp_node;
+ struct rds_connection *conn;
+ struct socket *t_sock;
+ void *t_orig_write_space;
+ void *t_orig_data_ready;
+ void *t_orig_state_change;
+
+ struct rds_tcp_incoming *t_tinc;
+ size_t t_tinc_hdr_rem;
+ size_t t_tinc_data_rem;
+
+ /* XXX error report? */
+ struct work_struct t_conn_w;
+ struct work_struct t_send_w;
+ struct work_struct t_down_w;
+ struct work_struct t_recv_w;
+
+ /* for info exporting only */
+ struct list_head t_list_item;
+ u32 t_last_sent_nxt;
+ u32 t_last_expected_una;
+ u32 t_last_seen_una;
+};
+
+struct rds_tcp_statistics {
+ uint64_t s_tcp_data_ready_calls;
+ uint64_t s_tcp_write_space_calls;
+ uint64_t s_tcp_sndbuf_full;
+ uint64_t s_tcp_connect_raced;
+ uint64_t s_tcp_listen_closed_stale;
+};
+
+/* tcp.c */
+int __init rds_tcp_init(void);
+void rds_tcp_exit(void);
+void rds_tcp_tune(struct socket *sock);
+void rds_tcp_nonagle(struct socket *sock);
+void rds_tcp_set_callbacks(struct socket *sock, struct rds_connection *conn);
+void rds_tcp_restore_callbacks(struct socket *sock,
+ struct rds_tcp_connection *tc);
+u32 rds_tcp_snd_nxt(struct rds_tcp_connection *tc);
+u32 rds_tcp_snd_una(struct rds_tcp_connection *tc);
+u64 rds_tcp_map_seq(struct rds_tcp_connection *tc, u32 seq);
+extern struct rds_transport rds_tcp_transport;
+
+/* tcp_connect.c */
+int rds_tcp_conn_connect(struct rds_connection *conn);
+void rds_tcp_conn_shutdown(struct rds_connection *conn);
+void rds_tcp_state_change(struct sock *sk);
+
+/* tcp_listen.c */
+int __init rds_tcp_listen_init(void);
+void rds_tcp_listen_stop(void);
+void rds_tcp_listen_data_ready(struct sock *sk, int bytes);
+
+/* tcp_recv.c */
+int __init rds_tcp_recv_init(void);
+void rds_tcp_recv_exit(void);
+void rds_tcp_data_ready(struct sock *sk, int bytes);
+int rds_tcp_recv(struct rds_connection *conn);
+void rds_tcp_inc_purge(struct rds_incoming *inc);
+void rds_tcp_inc_free(struct rds_incoming *inc);
+int rds_tcp_inc_copy_to_user(struct rds_incoming *inc, struct iovec *iov,
+ size_t size);
+
+/* tcp_send.c */
+void rds_tcp_xmit_prepare(struct rds_connection *conn);
+void rds_tcp_xmit_complete(struct rds_connection *conn);
+int rds_tcp_xmit(struct rds_connection *conn, struct rds_message *rm,
+ unsigned int hdr_off, unsigned int sg, unsigned int off);
+void rds_tcp_write_space(struct sock *sk);
+int rds_tcp_xmit_cong_map(struct rds_connection *conn,
+ struct rds_cong_map *map, unsigned long offset);
+
+/* tcp_stats.c */
+DECLARE_PER_CPU(struct rds_tcp_statistics, rds_tcp_stats);
+#define rds_tcp_stats_inc(member) rds_stats_inc_which(rds_tcp_stats, member)
+unsigned int rds_tcp_stats_info_copy(struct rds_info_iterator *iter,
+ unsigned int avail);
+
+#endif
diff --git a/net/rds/tcp_connect.c b/net/rds/tcp_connect.c
new file mode 100644
index 0000000..211522f
--- /dev/null
+++ b/net/rds/tcp_connect.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2006 Oracle. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/in.h>
+#include <net/tcp.h>
+
+#include "rds.h"
+#include "tcp.h"
+
+void rds_tcp_state_change(struct sock *sk)
+{
+ void (*state_change)(struct sock *sk);
+ struct rds_connection *conn;
+ struct rds_tcp_connection *tc;
+
+ read_lock(&sk->sk_callback_lock);
+ conn = sk->sk_user_data;
+ if (conn == NULL) {
+ state_change = sk->sk_state_change;
+ goto out;
+ }
+ tc = conn->c_transport_data;
+ state_change = tc->t_orig_state_change;
+
+ rdsdebug("sock %p state_change to %d\n", tc->t_sock, sk->sk_state);
+
+ switch(sk->sk_state) {
+ /* ignore connecting sockets as they make progress */
+ case TCP_SYN_SENT:
+ case TCP_SYN_RECV:
+ break;
+ case TCP_ESTABLISHED:
+ rds_connect_complete(conn);
+ break;
+ case TCP_CLOSE:
+ rds_conn_drop(conn);
+ default:
+ break;
+ }
+out:
+ read_unlock(&sk->sk_callback_lock);
+ state_change(sk);
+}
+
+int rds_tcp_conn_connect(struct rds_connection *conn)
+{
+ struct socket *sock = NULL;
+ struct sockaddr_in src, dest;
+ int ret;
+
+ ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+ if (ret < 0)
+ goto out;
+
+ rds_tcp_tune(sock);
+
+ src.sin_family = AF_INET;
+ src.sin_addr.s_addr = (__force u32)conn->c_laddr;
+ src.sin_port = (__force u16)htons(0);
+
+ ret = sock->ops->bind(sock, (struct sockaddr *)&src, sizeof(src));
+ if (ret) {
+ rdsdebug("bind failed with %d at address %u.%u.%u.%u\n",
+ ret, NIPQUAD(conn->c_laddr));
+ goto out;
+ }
+
+ dest.sin_family = AF_INET;
+ dest.sin_addr.s_addr = (__force u32)conn->c_faddr;
+ dest.sin_port = (__force u16)htons(RDS_TCP_PORT);
+
+ /*
+ * once we call connect() we can start getting callbacks and they
+ * own the socket
+ */
+ rds_tcp_set_callbacks(sock, conn);
+ ret = sock->ops->connect(sock, (struct sockaddr *)&dest, sizeof(dest),
+ O_NONBLOCK);
+ sock = NULL;
+
+ rdsdebug("connect to address %u.%u.%u.%u returned %d\n",
+ NIPQUAD(conn->c_faddr), ret);
+ if (ret == -EINPROGRESS)
+ ret = 0;
+
+out:
+ if (sock)
+ sock_release(sock);
+ return ret;
+}
+
+/*
+ * Before killing the tcp socket this needs to serialize with callbacks. The
+ * caller has already grabbed the sending sem so we're serialized with other
+ * senders.
+ *
+ * TCP calls the callbacks with the sock lock so we hold it while we reset the
+ * callbacks to those set by TCP. Our callbacks won't execute again once we
+ * hold the sock lock.
+ */
+void rds_tcp_conn_shutdown(struct rds_connection *conn)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ struct socket *sock = tc->t_sock;
+
+ rdsdebug("shutting down conn %p tc %p sock %p\n", conn, tc, sock);
+
+ if (sock) {
+ sock->ops->shutdown(sock, RCV_SHUTDOWN | SEND_SHUTDOWN);
+ lock_sock(sock->sk);
+ rds_tcp_restore_callbacks(sock, tc); /* tc->tc_sock = NULL */
+
+ release_sock(sock->sk);
+ sock_release(sock);
+ };
+
+ if (tc->t_tinc) {
+ rds_inc_put(&tc->t_tinc->ti_inc);
+ tc->t_tinc = NULL;
+ }
+ tc->t_tinc_hdr_rem = sizeof(struct rds_header);
+ tc->t_tinc_data_rem = 0;
+}
diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c
new file mode 100644
index 0000000..24b743e
--- /dev/null
+++ b/net/rds/tcp_listen.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2006 Oracle. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/in.h>
+#include <net/tcp.h>
+
+#include "rds.h"
+#include "tcp.h"
+
+/*
+ * cheesy, but simple..
+ */
+static void rds_tcp_accept_worker(struct work_struct *work);
+static DECLARE_WORK(rds_tcp_listen_work, rds_tcp_accept_worker);
+static struct socket *rds_tcp_listen_sock;
+
+static int rds_tcp_accept_one(struct socket *sock)
+{
+ struct socket *new_sock = NULL;
+ struct rds_connection *conn;
+ int ret;
+ struct inet_sock *inet;
+
+ ret = sock_create_lite(sock->sk->sk_family, sock->sk->sk_type,
+ sock->sk->sk_protocol, &new_sock);
+ if (ret)
+ goto out;
+
+ new_sock->type = sock->type;
+ new_sock->ops = sock->ops;
+ ret = sock->ops->accept(sock, new_sock, O_NONBLOCK);
+ if (ret < 0)
+ goto out;
+
+ rds_tcp_tune(new_sock);
+
+ inet = inet_sk(new_sock->sk);
+
+ rdsdebug("accepted tcp %u.%u.%u.%u:%u -> %u.%u.%u.%u:%u\n",
+ NIPQUAD(inet->saddr), ntohs(inet->sport),
+ NIPQUAD(inet->daddr), ntohs(inet->dport));
+
+ conn = rds_conn_create(inet->saddr, inet->daddr, &rds_tcp_transport,
+ GFP_KERNEL);
+ if (IS_ERR(conn)) {
+ ret = PTR_ERR(conn);
+ goto out;
+ }
+
+ /*
+ * see the comment above rds_queue_delayed_reconnect()
+ */
+ if (!rds_conn_transition(conn, RDS_CONN_DOWN, RDS_CONN_CONNECTING)) {
+ if (rds_conn_state(conn) == RDS_CONN_UP)
+ rds_tcp_stats_inc(s_tcp_listen_closed_stale);
+ else
+ rds_tcp_stats_inc(s_tcp_connect_raced);
+ rds_conn_drop(conn);
+ ret = 0;
+ goto out;
+ }
+
+ rds_tcp_set_callbacks(new_sock, conn);
+ rds_connect_complete(conn);
+ new_sock = NULL;
+ ret = 0;
+
+out:
+ if (new_sock)
+ sock_release(new_sock);
+ return ret;
+}
+
+static void rds_tcp_accept_worker(struct work_struct *work)
+{
+ while (rds_tcp_accept_one(rds_tcp_listen_sock) == 0)
+ cond_resched();
+}
+
+void rds_tcp_listen_data_ready(struct sock *sk, int bytes)
+{
+ void (*ready)(struct sock *sk, int bytes);
+
+ rdsdebug("listen data ready sk %p\n", sk);
+
+ read_lock(&sk->sk_callback_lock);
+ ready = sk->sk_user_data;
+ if (ready == NULL) { /* check for teardown race */
+ ready = sk->sk_data_ready;
+ goto out;
+ }
+
+ /*
+ * ->sk_data_ready is also called for a newly established child socket
+ * before it has been accepted and the accepter has set up their
+ * data_ready.. we only want to queue listen work for our listening
+ * socket
+ */
+ if (sk->sk_state == TCP_LISTEN)
+ queue_work(rds_wq, &rds_tcp_listen_work);
+
+out:
+ read_unlock(&sk->sk_callback_lock);
+ ready(sk, bytes);
+}
+
+int __init rds_tcp_listen_init(void)
+{
+ struct sockaddr_in sin;
+ struct socket *sock = NULL;
+ int ret;
+
+ ret = sock_create(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock);
+ if (ret < 0)
+ goto out;
+
+ sock->sk->sk_reuse = 1;
+ rds_tcp_nonagle(sock);
+
+ write_lock_bh(&sock->sk->sk_callback_lock);
+ sock->sk->sk_user_data = sock->sk->sk_data_ready;
+ sock->sk->sk_data_ready = rds_tcp_listen_data_ready;
+ write_unlock_bh(&sock->sk->sk_callback_lock);
+
+ sin.sin_family = PF_INET,
+ sin.sin_addr.s_addr = (__force u32)htonl(INADDR_ANY);
+ sin.sin_port = (__force u16)htons(RDS_TCP_PORT);
+
+ ret = sock->ops->bind(sock, (struct sockaddr *)&sin, sizeof(sin));
+ if (ret < 0)
+ goto out;
+
+ ret = sock->ops->listen(sock, 64);
+ if (ret < 0)
+ goto out;
+
+ rds_tcp_listen_sock = sock;
+ sock = NULL;
+out:
+ if (sock)
+ sock_release(sock);
+ return ret;
+}
+
+void rds_tcp_listen_stop(void)
+{
+ struct socket *sock = rds_tcp_listen_sock;
+ struct sock *sk;
+
+ if (sock == NULL)
+ return;
+
+ sk = sock->sk;
+
+ /* serialize with and prevent further callbacks */
+ lock_sock(sk);
+ write_lock_bh(&sk->sk_callback_lock);
+ if (sk->sk_user_data) {
+ sk->sk_data_ready = sk->sk_user_data;
+ sk->sk_user_data = NULL;
+ }
+ write_unlock_bh(&sk->sk_callback_lock);
+ release_sock(sk);
+
+ /* wait for accepts to stop and close the socket */
+ flush_workqueue(rds_wq);
+ sock_release(sock);
+ rds_tcp_listen_sock = NULL;
+}
diff --git a/net/rds/tcp_recv.c b/net/rds/tcp_recv.c
new file mode 100644
index 0000000..c00daff
--- /dev/null
+++ b/net/rds/tcp_recv.c
@@ -0,0 +1,356 @@
+/*
+ * Copyright (c) 2006 Oracle. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+#include <linux/kernel.h>
+#include <net/tcp.h>
+
+#include "rds.h"
+#include "tcp.h"
+
+static struct kmem_cache *rds_tcp_incoming_slab;
+
+void rds_tcp_inc_purge(struct rds_incoming *inc)
+{
+ struct rds_tcp_incoming *tinc;
+ tinc = container_of(inc, struct rds_tcp_incoming, ti_inc);
+ rdsdebug("purging tinc %p inc %p\n", tinc, inc);
+ skb_queue_purge(&tinc->ti_skb_list);
+}
+
+void rds_tcp_inc_free(struct rds_incoming *inc)
+{
+ struct rds_tcp_incoming *tinc;
+ tinc = container_of(inc, struct rds_tcp_incoming, ti_inc);
+ rds_tcp_inc_purge(inc);
+ rdsdebug("freeing tinc %p inc %p\n", tinc, inc);
+ kmem_cache_free(rds_tcp_incoming_slab, tinc);
+}
+
+/*
+ * this is pretty lame, but, whatever.
+ */
+int rds_tcp_inc_copy_to_user(struct rds_incoming *inc, struct iovec *first_iov,
+ size_t size)
+{
+ struct rds_tcp_incoming *tinc;
+ struct iovec *iov, tmp;
+ struct sk_buff *skb;
+ unsigned long to_copy, skb_off;
+ int ret = 0;
+
+ if (size == 0)
+ goto out;
+
+ tinc = container_of(inc, struct rds_tcp_incoming, ti_inc);
+ iov = first_iov;
+ tmp = *iov;
+
+ skb_queue_walk(&tinc->ti_skb_list, skb) {
+ skb_off = 0;
+ while (skb_off < skb->len) {
+ while (tmp.iov_len == 0) {
+ iov++;
+ tmp = *iov;
+ }
+
+ to_copy = min(tmp.iov_len, size);
+ to_copy = min(to_copy, skb->len - skb_off);
+
+ rdsdebug("ret %d size %zu skb %p skb_off %lu "
+ "skblen %d iov_base %p iov_len %zu cpy %lu\n",
+ ret, size, skb, skb_off, skb->len,
+ tmp.iov_base, tmp.iov_len, to_copy);
+
+ /* modifies tmp as it copies */
+ if (skb_copy_datagram_iovec(skb, skb_off, &tmp,
+ to_copy)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ size -= to_copy;
+ ret += to_copy;
+ skb_off += to_copy;
+ if (size == 0)
+ goto out;
+ }
+ }
+out:
+ return ret;
+}
+
+/*
+ * We have a series of skbs that have fragmented pieces of the congestion
+ * bitmap. They must add up to the exact size of the congestion bitmap. We
+ * use the skb helpers to copy those into the pages that make up the in-memory
+ * congestion bitmap for the remote address of this connection. We then tell
+ * the congestion core that the bitmap has been changed so that it can wake up
+ * sleepers.
+ *
+ * This is racing with sending paths which are using test_bit to see if the
+ * bitmap indicates that their recipient is congested.
+ */
+
+static void rds_tcp_cong_recv(struct rds_connection *conn,
+ struct rds_tcp_incoming *tinc)
+{
+ struct sk_buff *skb;
+ unsigned int to_copy, skb_off;
+ unsigned int map_off;
+ unsigned int map_page;
+ struct rds_cong_map *map;
+ int ret;
+
+ /* catch completely corrupt packets */
+ if (be32_to_cpu(tinc->ti_inc.i_hdr.h_len) != RDS_CONG_MAP_BYTES)
+ return;
+
+ map_page = 0;
+ map_off = 0;
+ map = conn->c_fcong;
+
+ skb_queue_walk(&tinc->ti_skb_list, skb) {
+ skb_off = 0;
+ while (skb_off < skb->len) {
+ to_copy = min_t(unsigned int, PAGE_SIZE - map_off,
+ skb->len - skb_off);
+
+ BUG_ON(map_page >= RDS_CONG_MAP_PAGES);
+
+ /* only returns 0 or -error */
+ ret = skb_copy_bits(skb, skb_off,
+ (void *)map->m_page_addrs[map_page] + map_off,
+ to_copy);
+ BUG_ON(ret != 0);
+
+ skb_off += to_copy;
+ map_off += to_copy;
+ if (map_off == PAGE_SIZE) {
+ map_off = 0;
+ map_page++;
+ }
+ }
+ }
+
+ rds_cong_map_updated(map, ~(u64) 0);
+}
+
+struct rds_tcp_desc_arg {
+ struct rds_connection *conn;
+ gfp_t gfp;
+ enum km_type km;
+};
+
+static int rds_tcp_data_recv(read_descriptor_t *desc, struct sk_buff *skb,
+ unsigned int offset, size_t len)
+{
+ struct rds_tcp_desc_arg *arg = desc->arg.data;
+ struct rds_connection *conn = arg->conn;
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ struct rds_tcp_incoming *tinc = tc->t_tinc;
+ struct sk_buff *clone;
+ size_t left = len, to_copy;
+
+ rdsdebug("tcp data tc %p skb %p offset %u len %zu\n", tc, skb, offset,
+ len);
+
+ /*
+ * tcp_read_sock() interprets partial progress as an indication to stop
+ * processing.
+ */
+ while (left) {
+ if (tinc == NULL) {
+ tinc = kmem_cache_alloc(rds_tcp_incoming_slab,
+ arg->gfp);
+ if (tinc == NULL) {
+ desc->error = -ENOMEM;
+ goto out;
+ }
+ tc->t_tinc = tinc;
+ rdsdebug("alloced tinc %p\n", tinc);
+ rds_inc_init(&tinc->ti_inc, conn, conn->c_faddr);
+ /*
+ * XXX * we might be able to use the __ variants when
+ * we've already serialized at a higher level.
+ */
+ skb_queue_head_init(&tinc->ti_skb_list);
+ }
+
+ if (left && tc->t_tinc_hdr_rem) {
+ to_copy = min(tc->t_tinc_hdr_rem, left);
+ rdsdebug("copying %zu header from skb %p\n", to_copy,
+ skb);
+ skb_copy_bits(skb, offset,
+ (char *)&tinc->ti_inc.i_hdr +
+ sizeof(struct rds_header) -
+ tc->t_tinc_hdr_rem,
+ to_copy);
+ tc->t_tinc_hdr_rem -= to_copy;
+ left -= to_copy;
+ offset += to_copy;
+
+ if (tc->t_tinc_hdr_rem == 0) {
+ /* could be 0 for a 0 len message */
+ tc->t_tinc_data_rem =
+ be32_to_cpu(tinc->ti_inc.i_hdr.h_len);
+ }
+ }
+
+ if (left && tc->t_tinc_data_rem) {
+ clone = skb_clone(skb, arg->gfp);
+ if (clone == NULL) {
+ desc->error = -ENOMEM;
+ goto out;
+ }
+
+ to_copy = min(tc->t_tinc_data_rem, left);
+ pskb_pull(clone, offset);
+ pskb_trim(clone, to_copy);
+ skb_queue_tail(&tinc->ti_skb_list, clone);
+
+ rdsdebug("skb %p data %p len %d off %u to_copy %zu -> "
+ "clone %p data %p len %d\n",
+ skb, skb->data, skb->len, offset, to_copy,
+ clone, clone->data, clone->len);
+
+ tc->t_tinc_data_rem -= to_copy;
+ left -= to_copy;
+ offset += to_copy;
+ }
+
+ if (tc->t_tinc_hdr_rem == 0 && tc->t_tinc_data_rem == 0) {
+ if (tinc->ti_inc.i_hdr.h_flags == RDS_FLAG_CONG_BITMAP)
+ rds_tcp_cong_recv(conn, tinc);
+ else
+ rds_recv_incoming(conn, conn->c_faddr,
+ conn->c_laddr, &tinc->ti_inc,
+ arg->gfp, arg->km);
+
+ tc->t_tinc_hdr_rem = sizeof(struct rds_header);
+ tc->t_tinc_data_rem = 0;
+ tc->t_tinc = NULL;
+ rds_inc_put(&tinc->ti_inc);
+ tinc = NULL;
+ }
+ }
+out:
+ rdsdebug("returning len %zu left %zu skb len %d rx queue depth %d\n",
+ len, left, skb->len,
+ skb_queue_len(&tc->t_sock->sk->sk_receive_queue));
+ return len - left;
+}
+
+/* the caller has to hold the sock lock */
+int rds_tcp_read_sock(struct rds_connection *conn, gfp_t gfp, enum km_type km)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ struct socket *sock = tc->t_sock;
+ read_descriptor_t desc;
+ struct rds_tcp_desc_arg arg;
+
+ /* It's like glib in the kernel! */
+ arg.conn = conn;
+ arg.gfp = gfp;
+ arg.km = km;
+ desc.arg.data = &arg;
+ desc.error = 0;
+ desc.count = 1; /* give more than one skb per call */
+
+ tcp_read_sock(sock->sk, &desc, rds_tcp_data_recv);
+ rdsdebug("tcp_read_sock for tc %p gfp 0x%x returned %d\n", tc, gfp,
+ desc.error);
+
+ return desc.error;
+}
+
+/*
+ * We hold the sock lock to serialize our rds_tcp_recv->tcp_read_sock from
+ * data_ready.
+ *
+ * if we fail to allocate we're in trouble.. blindly wait some time before
+ * trying again to see if the VM can free up something for us.
+ */
+int rds_tcp_recv(struct rds_connection *conn)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ struct socket *sock = tc->t_sock;
+ int ret = 0;
+
+ rdsdebug("recv worker conn %p tc %p sock %p\n", conn, tc, sock);
+
+ lock_sock(sock->sk);
+ ret = rds_tcp_read_sock(conn, GFP_KERNEL, KM_USER0);
+ release_sock(sock->sk);
+
+ return ret;
+}
+
+void rds_tcp_data_ready(struct sock *sk, int bytes)
+{
+ void (*ready)(struct sock *sk, int bytes);
+ struct rds_connection *conn;
+ struct rds_tcp_connection *tc;
+
+ rdsdebug("data ready sk %p bytes %d\n", sk, bytes);
+
+ read_lock(&sk->sk_callback_lock);
+ conn = sk->sk_user_data;
+ if (conn == NULL) { /* check for teardown race */
+ ready = sk->sk_data_ready;
+ goto out;
+ }
+
+ tc = conn->c_transport_data;
+ ready = tc->t_orig_data_ready;
+ rds_tcp_stats_inc(s_tcp_data_ready_calls);
+
+ if (rds_tcp_read_sock(conn, GFP_ATOMIC, KM_SOFTIRQ0) == -ENOMEM)
+ queue_delayed_work(rds_wq, &conn->c_recv_w, 0);
+out:
+ read_unlock(&sk->sk_callback_lock);
+ ready(sk, bytes);
+}
+
+int __init rds_tcp_recv_init(void)
+{
+ rds_tcp_incoming_slab = kmem_cache_create("rds_tcp_incoming",
+ sizeof(struct rds_tcp_incoming),
+ 0, 0, NULL);
+ if (rds_tcp_incoming_slab == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+void rds_tcp_recv_exit(void)
+{
+ kmem_cache_destroy(rds_tcp_incoming_slab);
+}
diff --git a/net/rds/tcp_send.c b/net/rds/tcp_send.c
new file mode 100644
index 0000000..ab545e0
--- /dev/null
+++ b/net/rds/tcp_send.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2006 Oracle. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/in.h>
+#include <net/tcp.h>
+
+#include "rds.h"
+#include "tcp.h"
+
+static void rds_tcp_cork(struct socket *sock, int val)
+{
+ mm_segment_t oldfs;
+
+ oldfs = get_fs();
+ set_fs(KERNEL_DS);
+ sock->ops->setsockopt(sock, SOL_TCP, TCP_CORK, (char __user *)&val,
+ sizeof(val));
+ set_fs(oldfs);
+}
+
+void rds_tcp_xmit_prepare(struct rds_connection *conn)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+
+ rds_tcp_cork(tc->t_sock, 1);
+}
+
+void rds_tcp_xmit_complete(struct rds_connection *conn)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+
+ rds_tcp_cork(tc->t_sock, 0);
+}
+
+/* the core send_sem serializes this with other xmit and shutdown */
+int rds_tcp_sendmsg(struct socket *sock, void *data, unsigned int len)
+{
+ struct kvec vec = {
+ .iov_base = data,
+ .iov_len = len,
+ };
+ struct msghdr msg = {
+ .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL,
+ };
+
+ return kernel_sendmsg(sock, &msg, &vec, 1, vec.iov_len);
+}
+
+/* the core send_sem serializes this with other xmit and shutdown */
+int rds_tcp_xmit_cong_map(struct rds_connection *conn,
+ struct rds_cong_map *map, unsigned long offset)
+{
+ static struct rds_header rds_tcp_map_header = {
+ .h_flags = RDS_FLAG_CONG_BITMAP,
+ };
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ unsigned long i;
+ int ret;
+ int copied = 0;
+
+ /* Some problem claims cpu_to_be32(constant) isn't a constant. */
+ rds_tcp_map_header.h_len = cpu_to_be32(RDS_CONG_MAP_BYTES);
+
+ if (offset < sizeof(struct rds_header)) {
+ ret = rds_tcp_sendmsg(tc->t_sock,
+ (void *)&rds_tcp_map_header + offset,
+ sizeof(struct rds_header) - offset);
+ if (ret <= 0)
+ return ret;
+ offset += ret;
+ copied = ret;
+ if (offset < sizeof(struct rds_header))
+ return ret;
+ }
+
+ offset -= sizeof(struct rds_header);
+ i = offset / PAGE_SIZE;
+ offset = offset % PAGE_SIZE;
+ BUG_ON(i >= RDS_CONG_MAP_PAGES);
+
+ do {
+ ret = tc->t_sock->ops->sendpage(tc->t_sock,
+ virt_to_page(map->m_page_addrs[i]),
+ offset, PAGE_SIZE - offset,
+ MSG_DONTWAIT);
+ if (ret <= 0)
+ break;
+ copied += ret;
+ offset += ret;
+ if (offset == PAGE_SIZE) {
+ offset = 0;
+ i++;
+ }
+ } while (i < RDS_CONG_MAP_PAGES);
+
+ return copied ? copied : ret;
+}
+
+/* the core send_sem serializes this with other xmit and shutdown */
+int rds_tcp_xmit(struct rds_connection *conn, struct rds_message *rm,
+ unsigned int hdr_off, unsigned int sg, unsigned int off)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ int done = 0;
+ int ret = 0;
+
+ if (hdr_off == 0) {
+ /*
+ * m_ack_seq is set to the sequence number of the last byte of
+ * header and data. see rds_tcp_is_acked().
+ */
+ tc->t_last_sent_nxt = rds_tcp_snd_nxt(tc);
+ rm->m_ack_seq = tc->t_last_sent_nxt +
+ sizeof(struct rds_header) +
+ be32_to_cpu(rm->m_inc.i_hdr.h_len) - 1;
+ smp_mb__before_clear_bit();
+ set_bit(RDS_MSG_HAS_ACK_SEQ, &rm->m_flags);
+ tc->t_last_expected_una = rm->m_ack_seq + 1;
+
+ rdsdebug("rm %p tcp nxt %u ack_seq %llu\n",
+ rm, rds_tcp_snd_nxt(tc),
+ (unsigned long long)rm->m_ack_seq);
+ }
+
+ if (hdr_off < sizeof(struct rds_header)) {
+ /* see rds_tcp_write_space() */
+ set_bit(SOCK_NOSPACE, &tc->t_sock->sk->sk_socket->flags);
+
+ ret = rds_tcp_sendmsg(tc->t_sock,
+ (void *)&rm->m_inc.i_hdr + hdr_off,
+ sizeof(rm->m_inc.i_hdr) - hdr_off);
+ if (ret < 0)
+ goto out;
+ done += ret;
+ if (hdr_off + done != sizeof(struct rds_header))
+ goto out;
+ }
+
+ while (sg < rm->m_nents) {
+ ret = tc->t_sock->ops->sendpage(tc->t_sock,
+ sg_page(&rm->m_sg[sg]),
+ rm->m_sg[sg].offset + off,
+ rm->m_sg[sg].length - off,
+ MSG_DONTWAIT|MSG_NOSIGNAL);
+ rdsdebug("tcp sendpage %p:%u:%u ret %d\n", (void *)sg_page(&rm->m_sg[sg]),
+ rm->m_sg[sg].offset + off, rm->m_sg[sg].length - off,
+ ret);
+ if (ret <= 0)
+ break;
+
+ off += ret;
+ done += ret;
+ if (off == rm->m_sg[sg].length) {
+ off = 0;
+ sg++;
+ }
+ }
+
+out:
+ if (ret <= 0) {
+ /* write_space will hit after EAGAIN, all else fatal */
+ if (ret == -EAGAIN) {
+ rds_tcp_stats_inc(s_tcp_sndbuf_full);
+ ret = 0;
+ } else {
+ printk(KERN_WARNING "RDS/tcp: send to %u.%u.%u.%u "
+ "returned %d, disconnecting and reconnecting\n",
+ NIPQUAD(conn->c_faddr), ret);
+ rds_conn_drop(conn);
+ }
+ }
+ if (done == 0)
+ done = ret;
+ return done;
+}
+
+/*
+ * rm->m_ack_seq is set to the tcp sequence number that corresponds to the
+ * last byte of the message, including the header. This means that the
+ * entire message has been received if rm->m_ack_seq is "before" the next
+ * unacked byte of the TCP sequence space. We have to do very careful
+ * wrapping 32bit comparisons here.
+ */
+static int rds_tcp_is_acked(struct rds_message *rm, uint64_t ack)
+{
+ if (!test_bit(RDS_MSG_HAS_ACK_SEQ, &rm->m_flags))
+ return 0;
+ return (__s32)((u32)rm->m_ack_seq - (u32)ack) < 0;
+}
+
+void rds_tcp_write_space(struct sock *sk)
+{
+ void (*write_space)(struct sock *sk);
+ struct rds_connection *conn;
+ struct rds_tcp_connection *tc;
+
+ read_lock(&sk->sk_callback_lock);
+ conn = sk->sk_user_data;
+ if (conn == NULL) {
+ write_space = sk->sk_write_space;
+ goto out;
+ }
+
+ tc = conn->c_transport_data;
+ rdsdebug("write_space for tc %p\n", tc);
+ write_space = tc->t_orig_write_space;
+ rds_tcp_stats_inc(s_tcp_write_space_calls);
+
+ rdsdebug("tcp una %u\n", rds_tcp_snd_una(tc));
+ tc->t_last_seen_una = rds_tcp_snd_una(tc);
+ rds_send_drop_acked(conn, rds_tcp_snd_una(tc), rds_tcp_is_acked);
+
+ queue_delayed_work(rds_wq, &conn->c_send_w, 0);
+out:
+ read_unlock(&sk->sk_callback_lock);
+
+ /*
+ * write_space is only called when data leaves tcp's send queue if
+ * SOCK_NOSPACE is set. We set SOCK_NOSPACE every time we put
+ * data in tcp's send queue because we use write_space to parse the
+ * sequence numbers and notice that rds messages have been fully
+ * received.
+ *
+ * tcp's write_space clears SOCK_NOSPACE if the send queue has more
+ * than a certain amount of space. So we need to set it again *after*
+ * we call tcp's write_space or else we might only get called on the
+ * first of a series of incoming tcp acks.
+ */
+ write_space(sk);
+
+ if (sk->sk_socket)
+ set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
+}
diff --git a/net/rds/tcp_stats.c b/net/rds/tcp_stats.c
new file mode 100644
index 0000000..d5898d0
--- /dev/null
+++ b/net/rds/tcp_stats.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2006 Oracle. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+#include <linux/percpu.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+
+#include "rds.h"
+#include "tcp.h"
+
+DEFINE_PER_CPU(struct rds_tcp_statistics, rds_tcp_stats)
+ ____cacheline_aligned;
+
+static const char const *rds_tcp_stat_names[] = {
+ "tcp_data_ready_calls",
+ "tcp_write_space_calls",
+ "tcp_sndbuf_full",
+ "tcp_connect_raced",
+ "tcp_listen_closed_stale",
+};
+
+unsigned int rds_tcp_stats_info_copy(struct rds_info_iterator *iter,
+ unsigned int avail)
+{
+ struct rds_tcp_statistics stats = {0, };
+ uint64_t *src;
+ uint64_t *sum;
+ size_t i;
+ int cpu;
+
+ if (avail < ARRAY_SIZE(rds_tcp_stat_names))
+ goto out;
+
+ for_each_online_cpu(cpu) {
+ src = (uint64_t *)&(per_cpu(rds_tcp_stats, cpu));
+ sum = (uint64_t *)&stats;
+ for (i = 0; i < sizeof(stats) / sizeof(uint64_t); i++)
+ *(sum++) += *(src++);
+ }
+
+ rds_stats_info_copy(iter, (uint64_t *)&stats, rds_tcp_stat_names,
+ ARRAY_SIZE(rds_tcp_stat_names));
+out:
+ return ARRAY_SIZE(rds_tcp_stat_names);
+}
diff --git a/net/rds/threads.c b/net/rds/threads.c
index 828a1bf..dd7e0ca 100644
--- a/net/rds/threads.c
+++ b/net/rds/threads.c
@@ -68,6 +68,7 @@
* (TCP, IB/RDMA) to provide the necessary synchronisation.
*/
struct workqueue_struct *rds_wq;
+EXPORT_SYMBOL_GPL(rds_wq);
void rds_connect_complete(struct rds_connection *conn)
{
@@ -89,6 +90,7 @@
queue_delayed_work(rds_wq, &conn->c_send_w, 0);
queue_delayed_work(rds_wq, &conn->c_recv_w, 0);
}
+EXPORT_SYMBOL_GPL(rds_connect_complete);
/*
* This random exponential backoff is relied on to eventually resolve racing
diff --git a/net/rds/transport.c b/net/rds/transport.c
index 767da61..7e10679 100644
--- a/net/rds/transport.c
+++ b/net/rds/transport.c
@@ -37,7 +37,7 @@
#include "rds.h"
#include "loop.h"
-static LIST_HEAD(rds_transports);
+static struct rds_transport *transports[RDS_TRANS_COUNT];
static DECLARE_RWSEM(rds_trans_sem);
int rds_trans_register(struct rds_transport *trans)
@@ -46,36 +46,44 @@
down_write(&rds_trans_sem);
- list_add_tail(&trans->t_item, &rds_transports);
- printk(KERN_INFO "Registered RDS/%s transport\n", trans->t_name);
+ if (transports[trans->t_type])
+ printk(KERN_ERR "RDS Transport type %d already registered\n",
+ trans->t_type);
+ else {
+ transports[trans->t_type] = trans;
+ printk(KERN_INFO "Registered RDS/%s transport\n", trans->t_name);
+ }
up_write(&rds_trans_sem);
return 0;
}
+EXPORT_SYMBOL_GPL(rds_trans_register);
void rds_trans_unregister(struct rds_transport *trans)
{
down_write(&rds_trans_sem);
- list_del_init(&trans->t_item);
+ transports[trans->t_type] = NULL;
printk(KERN_INFO "Unregistered RDS/%s transport\n", trans->t_name);
up_write(&rds_trans_sem);
}
+EXPORT_SYMBOL_GPL(rds_trans_unregister);
struct rds_transport *rds_trans_get_preferred(__be32 addr)
{
- struct rds_transport *trans;
struct rds_transport *ret = NULL;
+ int i;
if (IN_LOOPBACK(ntohl(addr)))
return &rds_loop_transport;
down_read(&rds_trans_sem);
- list_for_each_entry(trans, &rds_transports, t_item) {
- if (trans->laddr_check(addr) == 0) {
- ret = trans;
+ for (i = 0; i < RDS_TRANS_COUNT; i++)
+ {
+ if (transports[i] && (transports[i]->laddr_check(addr) == 0)) {
+ ret = transports[i];
break;
}
}
@@ -97,12 +105,15 @@
struct rds_transport *trans;
unsigned int total = 0;
unsigned int part;
+ int i;
rds_info_iter_unmap(iter);
down_read(&rds_trans_sem);
- list_for_each_entry(trans, &rds_transports, t_item) {
- if (trans->stats_info_copy == NULL)
+ for (i = 0; i < RDS_TRANS_COUNT; i++)
+ {
+ trans = transports[i];
+ if (!trans || !trans->stats_info_copy)
continue;
part = trans->stats_info_copy(iter, avail);
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 2fc4a17..dbeaf29 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -589,11 +589,13 @@
return "wimax";
case RFKILL_TYPE_WWAN:
return "wwan";
+ case RFKILL_TYPE_GPS:
+ return "gps";
default:
BUG();
}
- BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_WWAN + 1);
+ BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_GPS + 1);
}
static ssize_t rfkill_type_show(struct device *dev,
@@ -1091,10 +1093,16 @@
struct rfkill_event ev;
/* we don't need the 'hard' variable but accept it */
- if (count < sizeof(ev) - 1)
+ if (count < RFKILL_EVENT_SIZE_V1 - 1)
return -EINVAL;
- if (copy_from_user(&ev, buf, sizeof(ev) - 1))
+ /*
+ * Copy as much data as we can accept into our 'ev' buffer,
+ * but tell userspace how much we've copied so it can determine
+ * our API version even in a write() call, if it cares.
+ */
+ count = min(count, sizeof(ev));
+ if (copy_from_user(&ev, buf, count))
return -EFAULT;
if (ev.op != RFKILL_OP_CHANGE && ev.op != RFKILL_OP_CHANGE_ALL)
diff --git a/net/rose/rose_dev.c b/net/rose/rose_dev.c
index 389d6e0..424b893 100644
--- a/net/rose/rose_dev.c
+++ b/net/rose/rose_dev.c
@@ -131,7 +131,7 @@
return 0;
}
-static int rose_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t rose_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net_device_stats *stats = &dev->stats;
@@ -141,7 +141,7 @@
}
dev_kfree_skb(skb);
stats->tx_errors++;
- return 0;
+ return NETDEV_TX_OK;
}
static const struct header_ops rose_header_ops = {
diff --git a/net/rxrpc/ar-ack.c b/net/rxrpc/ar-ack.c
index 3ac1672..c9f1f0a 100644
--- a/net/rxrpc/ar-ack.c
+++ b/net/rxrpc/ar-ack.c
@@ -20,7 +20,7 @@
static unsigned rxrpc_ack_defer = 1;
-static const char *rxrpc_acks[] = {
+static const char *const rxrpc_acks[] = {
"---", "REQ", "DUP", "OOS", "WIN", "MEM", "PNG", "PNR", "DLY", "IDL",
"-?-"
};
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 54d950c..f14e71b 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Linux Traffic Control Unit.
#
-obj-y := sch_generic.o
+obj-y := sch_generic.o sch_mq.o
obj-$(CONFIG_NET_SCHED) += sch_api.o sch_blackhole.o
obj-$(CONFIG_NET_CLS) += cls_api.o
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 9d03cc3..2dfb3e7 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -1011,7 +1011,7 @@
}
static struct nlattr *
-find_dump_kind(struct nlmsghdr *n)
+find_dump_kind(const struct nlmsghdr *n)
{
struct nlattr *tb1, *tb2[TCA_ACT_MAX+1];
struct nlattr *tb[TCA_ACT_MAX_PRIO + 1];
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 09cdcdf..6a53694 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -168,8 +168,7 @@
/* Find qdisc */
if (!parent) {
- struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0);
- q = dev_queue->qdisc_sleeping;
+ q = dev->qdisc;
parent = q->handle;
} else {
q = qdisc_lookup(dev, TC_H_MAJ(t->tcm_parent));
@@ -181,6 +180,9 @@
if ((cops = q->ops->cl_ops) == NULL)
return -EINVAL;
+ if (cops->tcf_chain == NULL)
+ return -EOPNOTSUPP;
+
/* Do we search for filter, attached to class? */
if (TC_H_MIN(parent)) {
cl = cops->get(q, parent);
@@ -405,7 +407,6 @@
static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
{
struct net *net = sock_net(skb->sk);
- struct netdev_queue *dev_queue;
int t;
int s_t;
struct net_device *dev;
@@ -424,15 +425,16 @@
if ((dev = dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
return skb->len;
- dev_queue = netdev_get_tx_queue(dev, 0);
if (!tcm->tcm_parent)
- q = dev_queue->qdisc_sleeping;
+ q = dev->qdisc;
else
q = qdisc_lookup(dev, TC_H_MAJ(tcm->tcm_parent));
if (!q)
goto out;
if ((cops = q->ops->cl_ops) == NULL)
goto errout;
+ if (cops->tcf_chain == NULL)
+ goto errout;
if (TC_H_MIN(tcm->tcm_parent)) {
cl = cops->get(q, tcm->tcm_parent);
if (cl == 0)
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 24d17ce..692d9a4 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -207,7 +207,7 @@
static void qdisc_list_add(struct Qdisc *q)
{
if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS))
- list_add_tail(&q->list, &qdisc_root_sleeping(q)->list);
+ list_add_tail(&q->list, &qdisc_dev(q)->qdisc->list);
}
void qdisc_list_del(struct Qdisc *q)
@@ -219,17 +219,11 @@
struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle)
{
- unsigned int i;
struct Qdisc *q;
- for (i = 0; i < dev->num_tx_queues; i++) {
- struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
- struct Qdisc *txq_root = txq->qdisc_sleeping;
-
- q = qdisc_match_from_root(txq_root, handle);
- if (q)
- goto out;
- }
+ q = qdisc_match_from_root(dev->qdisc, handle);
+ if (q)
+ goto out;
q = qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
out:
@@ -616,32 +610,6 @@
return i>0 ? autohandle : 0;
}
-/* Attach toplevel qdisc to device queue. */
-
-static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
- struct Qdisc *qdisc)
-{
- struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
- spinlock_t *root_lock;
-
- root_lock = qdisc_lock(oqdisc);
- spin_lock_bh(root_lock);
-
- /* Prune old scheduler */
- if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
- qdisc_reset(oqdisc);
-
- /* ... and graft new one */
- if (qdisc == NULL)
- qdisc = &noop_qdisc;
- dev_queue->qdisc_sleeping = qdisc;
- rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc);
-
- spin_unlock_bh(root_lock);
-
- return oqdisc;
-}
-
void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n)
{
const struct Qdisc_class_ops *cops;
@@ -710,6 +678,11 @@
if (dev->flags & IFF_UP)
dev_deactivate(dev);
+ if (new && new->ops->attach) {
+ new->ops->attach(new);
+ num_q = 0;
+ }
+
for (i = 0; i < num_q; i++) {
struct netdev_queue *dev_queue = &dev->rx_queue;
@@ -720,22 +693,27 @@
if (new && i > 0)
atomic_inc(&new->refcnt);
- notify_and_destroy(skb, n, classid, old, new);
+ qdisc_destroy(old);
}
+ notify_and_destroy(skb, n, classid, dev->qdisc, new);
+ if (new && !new->ops->attach)
+ atomic_inc(&new->refcnt);
+ dev->qdisc = new ? : &noop_qdisc;
+
if (dev->flags & IFF_UP)
dev_activate(dev);
} else {
const struct Qdisc_class_ops *cops = parent->ops->cl_ops;
- err = -EINVAL;
-
- if (cops) {
+ err = -EOPNOTSUPP;
+ if (cops && cops->graft) {
unsigned long cl = cops->get(parent, classid);
if (cl) {
err = cops->graft(parent, cl, new, &old);
cops->put(parent, cl);
- }
+ } else
+ err = -ENOENT;
}
if (!err)
notify_and_destroy(skb, n, classid, old, new);
@@ -755,7 +733,8 @@
static struct Qdisc *
qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
- u32 parent, u32 handle, struct nlattr **tca, int *errp)
+ struct Qdisc *p, u32 parent, u32 handle,
+ struct nlattr **tca, int *errp)
{
int err;
struct nlattr *kind = tca[TCA_KIND];
@@ -832,24 +811,21 @@
if (tca[TCA_RATE]) {
spinlock_t *root_lock;
+ err = -EOPNOTSUPP;
+ if (sch->flags & TCQ_F_MQROOT)
+ goto err_out4;
+
if ((sch->parent != TC_H_ROOT) &&
- !(sch->flags & TCQ_F_INGRESS))
+ !(sch->flags & TCQ_F_INGRESS) &&
+ (!p || !(p->flags & TCQ_F_MQROOT)))
root_lock = qdisc_root_sleeping_lock(sch);
else
root_lock = qdisc_lock(sch);
err = gen_new_estimator(&sch->bstats, &sch->rate_est,
root_lock, tca[TCA_RATE]);
- if (err) {
- /*
- * Any broken qdiscs that would require
- * a ops->reset() here? The qdisc was never
- * in action so it shouldn't be necessary.
- */
- if (ops->destroy)
- ops->destroy(sch);
- goto err_out3;
- }
+ if (err)
+ goto err_out4;
}
qdisc_list_add(sch);
@@ -865,6 +841,15 @@
err_out:
*errp = err;
return NULL;
+
+err_out4:
+ /*
+ * Any broken qdiscs that would require a ops->reset() here?
+ * The qdisc was never in action so it shouldn't be necessary.
+ */
+ if (ops->destroy)
+ ops->destroy(sch);
+ goto err_out3;
}
static int qdisc_change(struct Qdisc *sch, struct nlattr **tca)
@@ -889,13 +874,16 @@
qdisc_put_stab(sch->stab);
sch->stab = stab;
- if (tca[TCA_RATE])
+ if (tca[TCA_RATE]) {
/* NB: ignores errors from replace_estimator
because change can't be undone. */
+ if (sch->flags & TCQ_F_MQROOT)
+ goto out;
gen_replace_estimator(&sch->bstats, &sch->rate_est,
qdisc_root_sleeping_lock(sch),
tca[TCA_RATE]);
-
+ }
+out:
return 0;
}
@@ -974,9 +962,7 @@
q = dev->rx_queue.qdisc_sleeping;
}
} else {
- struct netdev_queue *dev_queue;
- dev_queue = netdev_get_tx_queue(dev, 0);
- q = dev_queue->qdisc_sleeping;
+ q = dev->qdisc;
}
if (!q)
return -ENOENT;
@@ -1044,9 +1030,7 @@
q = dev->rx_queue.qdisc_sleeping;
}
} else {
- struct netdev_queue *dev_queue;
- dev_queue = netdev_get_tx_queue(dev, 0);
- q = dev_queue->qdisc_sleeping;
+ q = dev->qdisc;
}
/* It may be default qdisc, ignore it */
@@ -1123,13 +1107,19 @@
if (!(n->nlmsg_flags&NLM_F_CREATE))
return -ENOENT;
if (clid == TC_H_INGRESS)
- q = qdisc_create(dev, &dev->rx_queue,
+ q = qdisc_create(dev, &dev->rx_queue, p,
tcm->tcm_parent, tcm->tcm_parent,
tca, &err);
- else
- q = qdisc_create(dev, netdev_get_tx_queue(dev, 0),
+ else {
+ unsigned int ntx = 0;
+
+ if (p && p->ops->cl_ops && p->ops->cl_ops->select_queue)
+ ntx = p->ops->cl_ops->select_queue(p, tcm);
+
+ q = qdisc_create(dev, netdev_get_tx_queue(dev, ntx), p,
tcm->tcm_parent, tcm->tcm_handle,
tca, &err);
+ }
if (q == NULL) {
if (err == -EAGAIN)
goto replay;
@@ -1291,8 +1281,7 @@
s_q_idx = 0;
q_idx = 0;
- dev_queue = netdev_get_tx_queue(dev, 0);
- if (tc_dump_qdisc_root(dev_queue->qdisc_sleeping, skb, cb, &q_idx, s_q_idx) < 0)
+ if (tc_dump_qdisc_root(dev->qdisc, skb, cb, &q_idx, s_q_idx) < 0)
goto done;
dev_queue = &dev->rx_queue;
@@ -1323,7 +1312,6 @@
static int tc_ctl_tclass(struct sk_buff *skb, struct nlmsghdr *n, void *arg)
{
struct net *net = sock_net(skb->sk);
- struct netdev_queue *dev_queue;
struct tcmsg *tcm = NLMSG_DATA(n);
struct nlattr *tca[TCA_MAX + 1];
struct net_device *dev;
@@ -1361,7 +1349,6 @@
/* Step 1. Determine qdisc handle X:0 */
- dev_queue = netdev_get_tx_queue(dev, 0);
if (pid != TC_H_ROOT) {
u32 qid1 = TC_H_MAJ(pid);
@@ -1372,7 +1359,7 @@
} else if (qid1) {
qid = qid1;
} else if (qid == 0)
- qid = dev_queue->qdisc_sleeping->handle;
+ qid = dev->qdisc->handle;
/* Now qid is genuine qdisc handle consistent
both with parent and child.
@@ -1383,7 +1370,7 @@
pid = TC_H_MAKE(qid, pid);
} else {
if (qid == 0)
- qid = dev_queue->qdisc_sleeping->handle;
+ qid = dev->qdisc->handle;
}
/* OK. Locate qdisc */
@@ -1417,7 +1404,9 @@
goto out;
break;
case RTM_DELTCLASS:
- err = cops->delete(q, cl);
+ err = -EOPNOTSUPP;
+ if (cops->delete)
+ err = cops->delete(q, cl);
if (err == 0)
tclass_notify(skb, n, q, cl, RTM_DELTCLASS);
goto out;
@@ -1431,7 +1420,9 @@
}
new_cl = cl;
- err = cops->change(q, clid, pid, tca, &new_cl);
+ err = -EOPNOTSUPP;
+ if (cops->change)
+ err = cops->change(q, clid, pid, tca, &new_cl);
if (err == 0)
tclass_notify(skb, n, q, new_cl, RTM_NEWTCLASS);
@@ -1456,6 +1447,8 @@
nlh = NLMSG_NEW(skb, pid, seq, event, sizeof(*tcm), flags);
tcm = NLMSG_DATA(nlh);
tcm->tcm_family = AF_UNSPEC;
+ tcm->tcm__pad1 = 0;
+ tcm->tcm__pad2 = 0;
tcm->tcm_ifindex = qdisc_dev(q)->ifindex;
tcm->tcm_parent = q->handle;
tcm->tcm_handle = q->handle;
@@ -1584,8 +1577,7 @@
s_t = cb->args[0];
t = 0;
- dev_queue = netdev_get_tx_queue(dev, 0);
- if (tc_dump_tclass_root(dev_queue->qdisc_sleeping, skb, tcm, cb, &t, s_t) < 0)
+ if (tc_dump_tclass_root(dev->qdisc, skb, tcm, cb, &t, s_t) < 0)
goto done;
dev_queue = &dev->rx_queue;
@@ -1705,6 +1697,7 @@
{
register_qdisc(&pfifo_qdisc_ops);
register_qdisc(&bfifo_qdisc_ops);
+ register_qdisc(&mq_qdisc_ops);
proc_net_fops_create(&init_net, "psched", 0, &psched_fops);
rtnl_register(PF_UNSPEC, RTM_NEWQDISC, tc_modify_qdisc, NULL);
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index d5798e1..5b132c4 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1621,29 +1621,25 @@
{
struct cbq_class *cl = (struct cbq_class*)arg;
- if (cl) {
- if (new == NULL) {
- new = qdisc_create_dflt(qdisc_dev(sch), sch->dev_queue,
- &pfifo_qdisc_ops,
- cl->common.classid);
- if (new == NULL)
- return -ENOBUFS;
- } else {
+ if (new == NULL) {
+ new = qdisc_create_dflt(qdisc_dev(sch), sch->dev_queue,
+ &pfifo_qdisc_ops, cl->common.classid);
+ if (new == NULL)
+ return -ENOBUFS;
+ } else {
#ifdef CONFIG_NET_CLS_ACT
- if (cl->police == TC_POLICE_RECLASSIFY)
- new->reshape_fail = cbq_reshape_fail;
+ if (cl->police == TC_POLICE_RECLASSIFY)
+ new->reshape_fail = cbq_reshape_fail;
#endif
- }
- sch_tree_lock(sch);
- *old = cl->q;
- cl->q = new;
- qdisc_tree_decrease_qlen(*old, (*old)->q.qlen);
- qdisc_reset(*old);
- sch_tree_unlock(sch);
-
- return 0;
}
- return -ENOENT;
+ sch_tree_lock(sch);
+ *old = cl->q;
+ cl->q = new;
+ qdisc_tree_decrease_qlen(*old, (*old)->q.qlen);
+ qdisc_reset(*old);
+ sch_tree_unlock(sch);
+
+ return 0;
}
static struct Qdisc *
@@ -1651,7 +1647,7 @@
{
struct cbq_class *cl = (struct cbq_class*)arg;
- return cl ? cl->q : NULL;
+ return cl->q;
}
static void cbq_qlen_notify(struct Qdisc *sch, unsigned long arg)
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 27d0381..4ae6aa5 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -37,15 +37,11 @@
* - updates to tree and tree walking are only done under the rtnl mutex.
*/
-static inline int qdisc_qlen(struct Qdisc *q)
-{
- return q->q.qlen;
-}
-
static inline int dev_requeue_skb(struct sk_buff *skb, struct Qdisc *q)
{
q->gso_skb = skb;
q->qstats.requeues++;
+ q->q.qlen++; /* it's still part of the queue */
__netif_schedule(q);
return 0;
@@ -61,9 +57,11 @@
/* check the reason of requeuing without tx lock first */
txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
- if (!netif_tx_queue_stopped(txq) && !netif_tx_queue_frozen(txq))
+ if (!netif_tx_queue_stopped(txq) &&
+ !netif_tx_queue_frozen(txq)) {
q->gso_skb = NULL;
- else
+ q->q.qlen--;
+ } else
skb = NULL;
} else {
skb = q->dequeue(q);
@@ -103,44 +101,23 @@
}
/*
- * NOTE: Called under qdisc_lock(q) with locally disabled BH.
- *
- * __QDISC_STATE_RUNNING guarantees only one CPU can process
- * this qdisc at a time. qdisc_lock(q) serializes queue accesses for
- * this queue.
- *
- * netif_tx_lock serializes accesses to device driver.
- *
- * qdisc_lock(q) and netif_tx_lock are mutually exclusive,
- * if one is grabbed, another must be free.
- *
- * Note, that this procedure can be called by a watchdog timer
+ * Transmit one skb, and handle the return status as required. Holding the
+ * __QDISC_STATE_RUNNING bit guarantees that only one CPU can execute this
+ * function.
*
* Returns to the caller:
* 0 - queue is empty or throttled.
* >0 - queue is not empty.
- *
*/
-static inline int qdisc_restart(struct Qdisc *q)
+int sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q,
+ struct net_device *dev, struct netdev_queue *txq,
+ spinlock_t *root_lock)
{
- struct netdev_queue *txq;
int ret = NETDEV_TX_BUSY;
- struct net_device *dev;
- spinlock_t *root_lock;
- struct sk_buff *skb;
-
- /* Dequeue packet */
- if (unlikely((skb = dequeue_skb(q)) == NULL))
- return 0;
-
- root_lock = qdisc_lock(q);
/* And release qdisc */
spin_unlock(root_lock);
- dev = qdisc_dev(q);
- txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
-
HARD_TX_LOCK(dev, txq, smp_processor_id());
if (!netif_tx_queue_stopped(txq) &&
!netif_tx_queue_frozen(txq))
@@ -177,6 +154,44 @@
return ret;
}
+/*
+ * NOTE: Called under qdisc_lock(q) with locally disabled BH.
+ *
+ * __QDISC_STATE_RUNNING guarantees only one CPU can process
+ * this qdisc at a time. qdisc_lock(q) serializes queue accesses for
+ * this queue.
+ *
+ * netif_tx_lock serializes accesses to device driver.
+ *
+ * qdisc_lock(q) and netif_tx_lock are mutually exclusive,
+ * if one is grabbed, another must be free.
+ *
+ * Note, that this procedure can be called by a watchdog timer
+ *
+ * Returns to the caller:
+ * 0 - queue is empty or throttled.
+ * >0 - queue is not empty.
+ *
+ */
+static inline int qdisc_restart(struct Qdisc *q)
+{
+ struct netdev_queue *txq;
+ struct net_device *dev;
+ spinlock_t *root_lock;
+ struct sk_buff *skb;
+
+ /* Dequeue packet */
+ skb = dequeue_skb(q);
+ if (unlikely(!skb))
+ return 0;
+
+ root_lock = qdisc_lock(q);
+ dev = qdisc_dev(q);
+ txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
+
+ return sch_direct_xmit(skb, q, dev, txq, root_lock);
+}
+
void __qdisc_run(struct Qdisc *q)
{
unsigned long start_time = jiffies;
@@ -391,18 +406,38 @@
#define PFIFO_FAST_BANDS 3
-static inline struct sk_buff_head *prio2list(struct sk_buff *skb,
- struct Qdisc *qdisc)
+/*
+ * Private data for a pfifo_fast scheduler containing:
+ * - queues for the three band
+ * - bitmap indicating which of the bands contain skbs
+ */
+struct pfifo_fast_priv {
+ u32 bitmap;
+ struct sk_buff_head q[PFIFO_FAST_BANDS];
+};
+
+/*
+ * Convert a bitmap to the first band number where an skb is queued, where:
+ * bitmap=0 means there are no skbs on any band.
+ * bitmap=1 means there is an skb on band 0.
+ * bitmap=7 means there are skbs on all 3 bands, etc.
+ */
+static const int bitmap2band[] = {-1, 0, 1, 0, 2, 0, 1, 0};
+
+static inline struct sk_buff_head *band2list(struct pfifo_fast_priv *priv,
+ int band)
{
- struct sk_buff_head *list = qdisc_priv(qdisc);
- return list + prio2band[skb->priority & TC_PRIO_MAX];
+ return priv->q + band;
}
static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc* qdisc)
{
- struct sk_buff_head *list = prio2list(skb, qdisc);
+ if (skb_queue_len(&qdisc->q) < qdisc_dev(qdisc)->tx_queue_len) {
+ int band = prio2band[skb->priority & TC_PRIO_MAX];
+ struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+ struct sk_buff_head *list = band2list(priv, band);
- if (skb_queue_len(list) < qdisc_dev(qdisc)->tx_queue_len) {
+ priv->bitmap |= (1 << band);
qdisc->q.qlen++;
return __qdisc_enqueue_tail(skb, qdisc, list);
}
@@ -412,14 +447,18 @@
static struct sk_buff *pfifo_fast_dequeue(struct Qdisc* qdisc)
{
- int prio;
- struct sk_buff_head *list = qdisc_priv(qdisc);
+ struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+ int band = bitmap2band[priv->bitmap];
- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
- if (!skb_queue_empty(list + prio)) {
- qdisc->q.qlen--;
- return __qdisc_dequeue_head(qdisc, list + prio);
- }
+ if (likely(band >= 0)) {
+ struct sk_buff_head *list = band2list(priv, band);
+ struct sk_buff *skb = __qdisc_dequeue_head(qdisc, list);
+
+ qdisc->q.qlen--;
+ if (skb_queue_empty(list))
+ priv->bitmap &= ~(1 << band);
+
+ return skb;
}
return NULL;
@@ -427,12 +466,13 @@
static struct sk_buff *pfifo_fast_peek(struct Qdisc* qdisc)
{
- int prio;
- struct sk_buff_head *list = qdisc_priv(qdisc);
+ struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+ int band = bitmap2band[priv->bitmap];
- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
- if (!skb_queue_empty(list + prio))
- return skb_peek(list + prio);
+ if (band >= 0) {
+ struct sk_buff_head *list = band2list(priv, band);
+
+ return skb_peek(list);
}
return NULL;
@@ -441,11 +481,12 @@
static void pfifo_fast_reset(struct Qdisc* qdisc)
{
int prio;
- struct sk_buff_head *list = qdisc_priv(qdisc);
+ struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
- __qdisc_reset_queue(qdisc, list + prio);
+ __qdisc_reset_queue(qdisc, band2list(priv, prio));
+ priv->bitmap = 0;
qdisc->qstats.backlog = 0;
qdisc->q.qlen = 0;
}
@@ -465,17 +506,17 @@
static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt)
{
int prio;
- struct sk_buff_head *list = qdisc_priv(qdisc);
+ struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
- skb_queue_head_init(list + prio);
+ skb_queue_head_init(band2list(priv, prio));
return 0;
}
-static struct Qdisc_ops pfifo_fast_ops __read_mostly = {
+struct Qdisc_ops pfifo_fast_ops __read_mostly = {
.id = "pfifo_fast",
- .priv_size = PFIFO_FAST_BANDS * sizeof(struct sk_buff_head),
+ .priv_size = sizeof(struct pfifo_fast_priv),
.enqueue = pfifo_fast_enqueue,
.dequeue = pfifo_fast_dequeue,
.peek = pfifo_fast_peek,
@@ -547,8 +588,11 @@
if (ops->reset)
ops->reset(qdisc);
- kfree_skb(qdisc->gso_skb);
- qdisc->gso_skb = NULL;
+ if (qdisc->gso_skb) {
+ kfree_skb(qdisc->gso_skb);
+ qdisc->gso_skb = NULL;
+ qdisc->q.qlen = 0;
+ }
}
EXPORT_SYMBOL(qdisc_reset);
@@ -579,17 +623,29 @@
}
EXPORT_SYMBOL(qdisc_destroy);
-static bool dev_all_qdisc_sleeping_noop(struct net_device *dev)
+/* Attach toplevel qdisc to device queue. */
+struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
+ struct Qdisc *qdisc)
{
- unsigned int i;
+ struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
+ spinlock_t *root_lock;
- for (i = 0; i < dev->num_tx_queues; i++) {
- struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+ root_lock = qdisc_lock(oqdisc);
+ spin_lock_bh(root_lock);
- if (txq->qdisc_sleeping != &noop_qdisc)
- return false;
- }
- return true;
+ /* Prune old scheduler */
+ if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
+ qdisc_reset(oqdisc);
+
+ /* ... and graft new one */
+ if (qdisc == NULL)
+ qdisc = &noop_qdisc;
+ dev_queue->qdisc_sleeping = qdisc;
+ rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc);
+
+ spin_unlock_bh(root_lock);
+
+ return oqdisc;
}
static void attach_one_default_qdisc(struct net_device *dev,
@@ -605,12 +661,35 @@
printk(KERN_INFO "%s: activation failed\n", dev->name);
return;
}
+
+ /* Can by-pass the queue discipline for default qdisc */
+ qdisc->flags |= TCQ_F_CAN_BYPASS;
} else {
qdisc = &noqueue_qdisc;
}
dev_queue->qdisc_sleeping = qdisc;
}
+static void attach_default_qdiscs(struct net_device *dev)
+{
+ struct netdev_queue *txq;
+ struct Qdisc *qdisc;
+
+ txq = netdev_get_tx_queue(dev, 0);
+
+ if (!netif_is_multiqueue(dev) || dev->tx_queue_len == 0) {
+ netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL);
+ dev->qdisc = txq->qdisc_sleeping;
+ atomic_inc(&dev->qdisc->refcnt);
+ } else {
+ qdisc = qdisc_create_dflt(dev, txq, &mq_qdisc_ops, TC_H_ROOT);
+ if (qdisc) {
+ qdisc->ops->attach(qdisc);
+ dev->qdisc = qdisc;
+ }
+ }
+}
+
static void transition_one_qdisc(struct net_device *dev,
struct netdev_queue *dev_queue,
void *_need_watchdog)
@@ -638,8 +717,8 @@
virtual interfaces
*/
- if (dev_all_qdisc_sleeping_noop(dev))
- netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL);
+ if (dev->qdisc == &noop_qdisc)
+ attach_default_qdiscs(dev);
if (!netif_carrier_ok(dev))
/* Delay activation until next carrier-on event */
@@ -730,6 +809,7 @@
void dev_init_scheduler(struct net_device *dev)
{
+ dev->qdisc = &noop_qdisc;
netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
@@ -755,5 +835,8 @@
{
netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
+ qdisc_destroy(dev->qdisc);
+ dev->qdisc = &noop_qdisc;
+
WARN_ON(timer_pending(&dev->watchdog_timer));
}
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index dad0144..375d64c 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1203,8 +1203,6 @@
{
struct hfsc_class *cl = (struct hfsc_class *)arg;
- if (cl == NULL)
- return -ENOENT;
if (cl->level > 0)
return -EINVAL;
if (new == NULL) {
@@ -1228,7 +1226,7 @@
{
struct hfsc_class *cl = (struct hfsc_class *)arg;
- if (cl != NULL && cl->level == 0)
+ if (cl->level == 0)
return cl->qdisc;
return NULL;
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index ec4d463..85acab9 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1117,30 +1117,29 @@
{
struct htb_class *cl = (struct htb_class *)arg;
- if (cl && !cl->level) {
- if (new == NULL &&
- (new = qdisc_create_dflt(qdisc_dev(sch), sch->dev_queue,
- &pfifo_qdisc_ops,
- cl->common.classid))
- == NULL)
- return -ENOBUFS;
- sch_tree_lock(sch);
- *old = cl->un.leaf.q;
- cl->un.leaf.q = new;
- if (*old != NULL) {
- qdisc_tree_decrease_qlen(*old, (*old)->q.qlen);
- qdisc_reset(*old);
- }
- sch_tree_unlock(sch);
- return 0;
+ if (cl->level)
+ return -EINVAL;
+ if (new == NULL &&
+ (new = qdisc_create_dflt(qdisc_dev(sch), sch->dev_queue,
+ &pfifo_qdisc_ops,
+ cl->common.classid)) == NULL)
+ return -ENOBUFS;
+
+ sch_tree_lock(sch);
+ *old = cl->un.leaf.q;
+ cl->un.leaf.q = new;
+ if (*old != NULL) {
+ qdisc_tree_decrease_qlen(*old, (*old)->q.qlen);
+ qdisc_reset(*old);
}
- return -ENOENT;
+ sch_tree_unlock(sch);
+ return 0;
}
static struct Qdisc *htb_leaf(struct Qdisc *sch, unsigned long arg)
{
struct htb_class *cl = (struct htb_class *)arg;
- return (cl && !cl->level) ? cl->un.leaf.q : NULL;
+ return !cl->level ? cl->un.leaf.q : NULL;
}
static void htb_qlen_notify(struct Qdisc *sch, unsigned long arg)
diff --git a/net/sched/sch_ingress.c b/net/sched/sch_ingress.c
index 4a2b773..a9e646b 100644
--- a/net/sched/sch_ingress.c
+++ b/net/sched/sch_ingress.c
@@ -22,12 +22,6 @@
/* ------------------------- Class/flow operations ------------------------- */
-static int ingress_graft(struct Qdisc *sch, unsigned long arg,
- struct Qdisc *new, struct Qdisc **old)
-{
- return -EOPNOTSUPP;
-}
-
static struct Qdisc *ingress_leaf(struct Qdisc *sch, unsigned long arg)
{
return NULL;
@@ -48,12 +42,6 @@
{
}
-static int ingress_change(struct Qdisc *sch, u32 classid, u32 parent,
- struct nlattr **tca, unsigned long *arg)
-{
- return 0;
-}
-
static void ingress_walk(struct Qdisc *sch, struct qdisc_walker *walker)
{
return;
@@ -123,11 +111,9 @@
}
static const struct Qdisc_class_ops ingress_class_ops = {
- .graft = ingress_graft,
.leaf = ingress_leaf,
.get = ingress_get,
.put = ingress_put,
- .change = ingress_change,
.walk = ingress_walk,
.tcf_chain = ingress_find_tcf,
.bind_tcf = ingress_bind_filter,
diff --git a/net/sched/sch_mq.c b/net/sched/sch_mq.c
new file mode 100644
index 0000000..dd5ee02
--- /dev/null
+++ b/net/sched/sch_mq.c
@@ -0,0 +1,235 @@
+/*
+ * net/sched/sch_mq.c Classful multiqueue dummy scheduler
+ *
+ * Copyright (c) 2009 Patrick McHardy <kaber@trash.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <net/netlink.h>
+#include <net/pkt_sched.h>
+
+struct mq_sched {
+ struct Qdisc **qdiscs;
+};
+
+static void mq_destroy(struct Qdisc *sch)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ struct mq_sched *priv = qdisc_priv(sch);
+ unsigned int ntx;
+
+ if (!priv->qdiscs)
+ return;
+ for (ntx = 0; ntx < dev->num_tx_queues && priv->qdiscs[ntx]; ntx++)
+ qdisc_destroy(priv->qdiscs[ntx]);
+ kfree(priv->qdiscs);
+}
+
+static int mq_init(struct Qdisc *sch, struct nlattr *opt)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ struct mq_sched *priv = qdisc_priv(sch);
+ struct netdev_queue *dev_queue;
+ struct Qdisc *qdisc;
+ unsigned int ntx;
+
+ if (sch->parent != TC_H_ROOT)
+ return -EOPNOTSUPP;
+
+ if (!netif_is_multiqueue(dev))
+ return -EOPNOTSUPP;
+
+ /* pre-allocate qdiscs, attachment can't fail */
+ priv->qdiscs = kcalloc(dev->num_tx_queues, sizeof(priv->qdiscs[0]),
+ GFP_KERNEL);
+ if (priv->qdiscs == NULL)
+ return -ENOMEM;
+
+ for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
+ dev_queue = netdev_get_tx_queue(dev, ntx);
+ qdisc = qdisc_create_dflt(dev, dev_queue, &pfifo_fast_ops,
+ TC_H_MAKE(TC_H_MAJ(sch->handle),
+ TC_H_MIN(ntx + 1)));
+ if (qdisc == NULL)
+ goto err;
+ qdisc->flags |= TCQ_F_CAN_BYPASS;
+ priv->qdiscs[ntx] = qdisc;
+ }
+
+ sch->flags |= TCQ_F_MQROOT;
+ return 0;
+
+err:
+ mq_destroy(sch);
+ return -ENOMEM;
+}
+
+static void mq_attach(struct Qdisc *sch)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ struct mq_sched *priv = qdisc_priv(sch);
+ struct Qdisc *qdisc;
+ unsigned int ntx;
+
+ for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
+ qdisc = priv->qdiscs[ntx];
+ qdisc = dev_graft_qdisc(qdisc->dev_queue, qdisc);
+ if (qdisc)
+ qdisc_destroy(qdisc);
+ }
+ kfree(priv->qdiscs);
+ priv->qdiscs = NULL;
+}
+
+static int mq_dump(struct Qdisc *sch, struct sk_buff *skb)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ struct Qdisc *qdisc;
+ unsigned int ntx;
+
+ sch->q.qlen = 0;
+ memset(&sch->bstats, 0, sizeof(sch->bstats));
+ memset(&sch->qstats, 0, sizeof(sch->qstats));
+
+ for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
+ qdisc = netdev_get_tx_queue(dev, ntx)->qdisc_sleeping;
+ spin_lock_bh(qdisc_lock(qdisc));
+ sch->q.qlen += qdisc->q.qlen;
+ sch->bstats.bytes += qdisc->bstats.bytes;
+ sch->bstats.packets += qdisc->bstats.packets;
+ sch->qstats.qlen += qdisc->qstats.qlen;
+ sch->qstats.backlog += qdisc->qstats.backlog;
+ sch->qstats.drops += qdisc->qstats.drops;
+ sch->qstats.requeues += qdisc->qstats.requeues;
+ sch->qstats.overlimits += qdisc->qstats.overlimits;
+ spin_unlock_bh(qdisc_lock(qdisc));
+ }
+ return 0;
+}
+
+static struct netdev_queue *mq_queue_get(struct Qdisc *sch, unsigned long cl)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ unsigned long ntx = cl - 1;
+
+ if (ntx >= dev->num_tx_queues)
+ return NULL;
+ return netdev_get_tx_queue(dev, ntx);
+}
+
+static unsigned int mq_select_queue(struct Qdisc *sch, struct tcmsg *tcm)
+{
+ unsigned int ntx = TC_H_MIN(tcm->tcm_parent);
+
+ if (!mq_queue_get(sch, ntx))
+ return 0;
+ return ntx - 1;
+}
+
+static int mq_graft(struct Qdisc *sch, unsigned long cl, struct Qdisc *new,
+ struct Qdisc **old)
+{
+ struct netdev_queue *dev_queue = mq_queue_get(sch, cl);
+ struct net_device *dev = qdisc_dev(sch);
+
+ if (dev->flags & IFF_UP)
+ dev_deactivate(dev);
+
+ *old = dev_graft_qdisc(dev_queue, new);
+
+ if (dev->flags & IFF_UP)
+ dev_activate(dev);
+ return 0;
+}
+
+static struct Qdisc *mq_leaf(struct Qdisc *sch, unsigned long cl)
+{
+ struct netdev_queue *dev_queue = mq_queue_get(sch, cl);
+
+ return dev_queue->qdisc_sleeping;
+}
+
+static unsigned long mq_get(struct Qdisc *sch, u32 classid)
+{
+ unsigned int ntx = TC_H_MIN(classid);
+
+ if (!mq_queue_get(sch, ntx))
+ return 0;
+ return ntx;
+}
+
+static void mq_put(struct Qdisc *sch, unsigned long cl)
+{
+ return;
+}
+
+static int mq_dump_class(struct Qdisc *sch, unsigned long cl,
+ struct sk_buff *skb, struct tcmsg *tcm)
+{
+ struct netdev_queue *dev_queue = mq_queue_get(sch, cl);
+
+ tcm->tcm_parent = TC_H_ROOT;
+ tcm->tcm_handle |= TC_H_MIN(cl);
+ tcm->tcm_info = dev_queue->qdisc_sleeping->handle;
+ return 0;
+}
+
+static int mq_dump_class_stats(struct Qdisc *sch, unsigned long cl,
+ struct gnet_dump *d)
+{
+ struct netdev_queue *dev_queue = mq_queue_get(sch, cl);
+
+ sch = dev_queue->qdisc_sleeping;
+ if (gnet_stats_copy_basic(d, &sch->bstats) < 0 ||
+ gnet_stats_copy_queue(d, &sch->qstats) < 0)
+ return -1;
+ return 0;
+}
+
+static void mq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
+{
+ struct net_device *dev = qdisc_dev(sch);
+ unsigned int ntx;
+
+ if (arg->stop)
+ return;
+
+ arg->count = arg->skip;
+ for (ntx = arg->skip; ntx < dev->num_tx_queues; ntx++) {
+ if (arg->fn(sch, ntx + 1, arg) < 0) {
+ arg->stop = 1;
+ break;
+ }
+ arg->count++;
+ }
+}
+
+static const struct Qdisc_class_ops mq_class_ops = {
+ .select_queue = mq_select_queue,
+ .graft = mq_graft,
+ .leaf = mq_leaf,
+ .get = mq_get,
+ .put = mq_put,
+ .walk = mq_walk,
+ .dump = mq_dump_class,
+ .dump_stats = mq_dump_class_stats,
+};
+
+struct Qdisc_ops mq_qdisc_ops __read_mostly = {
+ .cl_ops = &mq_class_ops,
+ .id = "mq",
+ .priv_size = sizeof(struct mq_sched),
+ .init = mq_init,
+ .destroy = mq_destroy,
+ .attach = mq_attach,
+ .dump = mq_dump,
+ .owner = THIS_MODULE,
+};
diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c
index 9127312..069f81c 100644
--- a/net/sched/sch_multiq.c
+++ b/net/sched/sch_multiq.c
@@ -298,9 +298,6 @@
struct multiq_sched_data *q = qdisc_priv(sch);
unsigned long band = arg - 1;
- if (band >= q->bands)
- return -EINVAL;
-
if (new == NULL)
new = &noop_qdisc;
@@ -320,9 +317,6 @@
struct multiq_sched_data *q = qdisc_priv(sch);
unsigned long band = arg - 1;
- if (band >= q->bands)
- return NULL;
-
return q->queues[band];
}
@@ -348,36 +342,13 @@
return;
}
-static int multiq_change(struct Qdisc *sch, u32 handle, u32 parent,
- struct nlattr **tca, unsigned long *arg)
-{
- unsigned long cl = *arg;
- struct multiq_sched_data *q = qdisc_priv(sch);
-
- if (cl - 1 > q->bands)
- return -ENOENT;
- return 0;
-}
-
-static int multiq_delete(struct Qdisc *sch, unsigned long cl)
-{
- struct multiq_sched_data *q = qdisc_priv(sch);
- if (cl - 1 > q->bands)
- return -ENOENT;
- return 0;
-}
-
-
static int multiq_dump_class(struct Qdisc *sch, unsigned long cl,
struct sk_buff *skb, struct tcmsg *tcm)
{
struct multiq_sched_data *q = qdisc_priv(sch);
- if (cl - 1 > q->bands)
- return -ENOENT;
tcm->tcm_handle |= TC_H_MIN(cl);
- if (q->queues[cl-1])
- tcm->tcm_info = q->queues[cl-1]->handle;
+ tcm->tcm_info = q->queues[cl-1]->handle;
return 0;
}
@@ -430,8 +401,6 @@
.leaf = multiq_leaf,
.get = multiq_get,
.put = multiq_put,
- .change = multiq_change,
- .delete = multiq_delete,
.walk = multiq_walk,
.tcf_chain = multiq_find_tcf,
.bind_tcf = multiq_bind,
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 94cecef..0f73c41 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -262,9 +262,6 @@
struct prio_sched_data *q = qdisc_priv(sch);
unsigned long band = arg - 1;
- if (band >= q->bands)
- return -EINVAL;
-
if (new == NULL)
new = &noop_qdisc;
@@ -284,9 +281,6 @@
struct prio_sched_data *q = qdisc_priv(sch);
unsigned long band = arg - 1;
- if (band >= q->bands)
- return NULL;
-
return q->queues[band];
}
@@ -311,35 +305,13 @@
return;
}
-static int prio_change(struct Qdisc *sch, u32 handle, u32 parent, struct nlattr **tca, unsigned long *arg)
-{
- unsigned long cl = *arg;
- struct prio_sched_data *q = qdisc_priv(sch);
-
- if (cl - 1 > q->bands)
- return -ENOENT;
- return 0;
-}
-
-static int prio_delete(struct Qdisc *sch, unsigned long cl)
-{
- struct prio_sched_data *q = qdisc_priv(sch);
- if (cl - 1 > q->bands)
- return -ENOENT;
- return 0;
-}
-
-
static int prio_dump_class(struct Qdisc *sch, unsigned long cl, struct sk_buff *skb,
struct tcmsg *tcm)
{
struct prio_sched_data *q = qdisc_priv(sch);
- if (cl - 1 > q->bands)
- return -ENOENT;
tcm->tcm_handle |= TC_H_MIN(cl);
- if (q->queues[cl-1])
- tcm->tcm_info = q->queues[cl-1]->handle;
+ tcm->tcm_info = q->queues[cl-1]->handle;
return 0;
}
@@ -392,8 +364,6 @@
.leaf = prio_leaf,
.get = prio_get,
.put = prio_put,
- .change = prio_change,
- .delete = prio_delete,
.walk = prio_walk,
.tcf_chain = prio_find_tcf,
.bind_tcf = prio_bind,
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 2bdf241..072cdf4 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -268,8 +268,6 @@
{
struct red_sched_data *q = qdisc_priv(sch);
- if (cl != 1)
- return -ENOENT;
tcm->tcm_handle |= TC_H_MIN(1);
tcm->tcm_info = q->qdisc->handle;
return 0;
@@ -308,17 +306,6 @@
return;
}
-static int red_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
- struct nlattr **tca, unsigned long *arg)
-{
- return -ENOSYS;
-}
-
-static int red_delete(struct Qdisc *sch, unsigned long cl)
-{
- return -ENOSYS;
-}
-
static void red_walk(struct Qdisc *sch, struct qdisc_walker *walker)
{
if (!walker->stop) {
@@ -331,20 +318,12 @@
}
}
-static struct tcf_proto **red_find_tcf(struct Qdisc *sch, unsigned long cl)
-{
- return NULL;
-}
-
static const struct Qdisc_class_ops red_class_ops = {
.graft = red_graft,
.leaf = red_leaf,
.get = red_get,
.put = red_put,
- .change = red_change_class,
- .delete = red_delete,
.walk = red_walk,
- .tcf_chain = red_find_tcf,
.dump = red_dump_class,
};
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 8706920..cb21380 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -496,12 +496,6 @@
return -1;
}
-static int sfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
- struct nlattr **tca, unsigned long *arg)
-{
- return -EOPNOTSUPP;
-}
-
static unsigned long sfq_get(struct Qdisc *sch, u32 classid)
{
return 0;
@@ -560,7 +554,6 @@
static const struct Qdisc_class_ops sfq_class_ops = {
.get = sfq_get,
- .change = sfq_change_class,
.tcf_chain = sfq_find_tcf,
.dump = sfq_dump_class,
.dump_stats = sfq_dump_class_stats,
diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c
index e22dfe8..8fb8107 100644
--- a/net/sched/sch_tbf.c
+++ b/net/sched/sch_tbf.c
@@ -368,9 +368,6 @@
{
struct tbf_sched_data *q = qdisc_priv(sch);
- if (cl != 1) /* only one class */
- return -ENOENT;
-
tcm->tcm_handle |= TC_H_MIN(1);
tcm->tcm_info = q->qdisc->handle;
@@ -410,17 +407,6 @@
{
}
-static int tbf_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
- struct nlattr **tca, unsigned long *arg)
-{
- return -ENOSYS;
-}
-
-static int tbf_delete(struct Qdisc *sch, unsigned long arg)
-{
- return -ENOSYS;
-}
-
static void tbf_walk(struct Qdisc *sch, struct qdisc_walker *walker)
{
if (!walker->stop) {
@@ -433,21 +419,13 @@
}
}
-static struct tcf_proto **tbf_find_tcf(struct Qdisc *sch, unsigned long cl)
-{
- return NULL;
-}
-
static const struct Qdisc_class_ops tbf_class_ops =
{
.graft = tbf_graft,
.leaf = tbf_leaf,
.get = tbf_get,
.put = tbf_put,
- .change = tbf_change_class,
- .delete = tbf_delete,
.walk = tbf_walk,
- .tcf_chain = tbf_find_tcf,
.dump = tbf_dump_class,
};
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 9c002b6..5a002c2 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -268,7 +268,7 @@
return __teql_resolve(skb, skb_res, dev);
}
-static int teql_master_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t teql_master_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct teql_master *master = netdev_priv(dev);
struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
@@ -307,14 +307,14 @@
if (!netif_tx_queue_stopped(slave_txq) &&
!netif_tx_queue_frozen(slave_txq) &&
- slave_ops->ndo_start_xmit(skb, slave) == 0) {
+ slave_ops->ndo_start_xmit(skb, slave) == NETDEV_TX_OK) {
txq_trans_update(slave_txq);
__netif_tx_unlock(slave_txq);
master->slaves = NEXT_SLAVE(q);
netif_wake_queue(dev);
txq->tx_packets++;
txq->tx_bytes += length;
- return 0;
+ return NETDEV_TX_OK;
}
__netif_tx_unlock(slave_txq);
}
@@ -323,7 +323,7 @@
break;
case 1:
master->slaves = NEXT_SLAVE(q);
- return 0;
+ return NETDEV_TX_OK;
default:
nores = 1;
break;
@@ -345,7 +345,7 @@
drop:
txq->tx_dropped++;
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
static int teql_master_open(struct net_device *dev)
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 525864b..8450960 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -112,6 +112,7 @@
asoc->cookie_life.tv_usec = (sp->assocparams.sasoc_cookie_life % 1000)
* 1000;
asoc->frag_point = 0;
+ asoc->user_frag = sp->user_frag;
/* Set the association max_retrans and RTO values from the
* socket values.
@@ -202,6 +203,7 @@
asoc->a_rwnd = asoc->rwnd;
asoc->rwnd_over = 0;
+ asoc->rwnd_press = 0;
/* Use my own max window until I learn something better. */
asoc->peer.rwnd = SCTP_DEFAULT_MAXWINDOW;
@@ -582,6 +584,33 @@
asoc->addip_last_asconf->transport == peer)
asoc->addip_last_asconf->transport = NULL;
+ /* If we have something on the transmitted list, we have to
+ * save it off. The best place is the active path.
+ */
+ if (!list_empty(&peer->transmitted)) {
+ struct sctp_transport *active = asoc->peer.active_path;
+ struct sctp_chunk *ch;
+
+ /* Reset the transport of each chunk on this list */
+ list_for_each_entry(ch, &peer->transmitted,
+ transmitted_list) {
+ ch->transport = NULL;
+ ch->rtt_in_progress = 0;
+ }
+
+ list_splice_tail_init(&peer->transmitted,
+ &active->transmitted);
+
+ /* Start a T3 timer here in case it wasn't running so
+ * that these migrated packets have a chance to get
+ * retrnasmitted.
+ */
+ if (!timer_pending(&active->T3_rtx_timer))
+ if (!mod_timer(&active->T3_rtx_timer,
+ jiffies + active->rto))
+ sctp_transport_hold(active);
+ }
+
asoc->peer.transport_count--;
sctp_transport_free(peer);
@@ -651,13 +680,15 @@
*/
peer->param_flags = asoc->param_flags;
+ sctp_transport_route(peer, NULL, sp);
+
/* Initialize the pmtu of the transport. */
- if (peer->param_flags & SPP_PMTUD_ENABLE)
- sctp_transport_pmtu(peer);
- else if (asoc->pathmtu)
- peer->pathmtu = asoc->pathmtu;
- else
- peer->pathmtu = SCTP_DEFAULT_MAXSEGMENT;
+ if (peer->param_flags & SPP_PMTUD_DISABLE) {
+ if (asoc->pathmtu)
+ peer->pathmtu = asoc->pathmtu;
+ else
+ peer->pathmtu = SCTP_DEFAULT_MAXSEGMENT;
+ }
/* If this is the first transport addr on this association,
* initialize the association PMTU to the peer's PMTU.
@@ -673,7 +704,7 @@
"%d\n", asoc, asoc->pathmtu);
peer->pmtu_pending = 0;
- asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu);
+ asoc->frag_point = sctp_frag_point(asoc, asoc->pathmtu);
/* The asoc->peer.port might not be meaningful yet, but
* initialize the packet structure anyway.
@@ -810,11 +841,16 @@
break;
case SCTP_TRANSPORT_DOWN:
- /* if the transort was never confirmed, do not transition it
- * to inactive state.
+ /* If the transport was never confirmed, do not transition it
+ * to inactive state. Also, release the cached route since
+ * there may be a better route next time.
*/
if (transport->state != SCTP_UNCONFIRMED)
transport->state = SCTP_INACTIVE;
+ else {
+ dst_release(transport->dst);
+ transport->dst = NULL;
+ }
spc_state = SCTP_ADDR_UNREACHABLE;
break;
@@ -1324,9 +1360,8 @@
}
if (pmtu) {
- struct sctp_sock *sp = sctp_sk(asoc->base.sk);
asoc->pathmtu = pmtu;
- asoc->frag_point = sctp_frag_point(sp, pmtu);
+ asoc->frag_point = sctp_frag_point(asoc, pmtu);
}
SCTP_DEBUG_PRINTK("%s: asoc:%p, pmtu:%d, frag_point:%d\n",
@@ -1369,6 +1404,17 @@
asoc->rwnd += len;
}
+ /* If we had window pressure, start recovering it
+ * once our rwnd had reached the accumulated pressure
+ * threshold. The idea is to recover slowly, but up
+ * to the initial advertised window.
+ */
+ if (asoc->rwnd_press && asoc->rwnd >= asoc->rwnd_press) {
+ int change = min(asoc->pathmtu, asoc->rwnd_press);
+ asoc->rwnd += change;
+ asoc->rwnd_press -= change;
+ }
+
SCTP_DEBUG_PRINTK("%s: asoc %p rwnd increased by %d to (%u, %u) "
"- %u\n", __func__, asoc, len, asoc->rwnd,
asoc->rwnd_over, asoc->a_rwnd);
@@ -1401,17 +1447,38 @@
/* Decrease asoc's rwnd by len. */
void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned len)
{
+ int rx_count;
+ int over = 0;
+
SCTP_ASSERT(asoc->rwnd, "rwnd zero", return);
SCTP_ASSERT(!asoc->rwnd_over, "rwnd_over not zero", return);
+
+ if (asoc->ep->rcvbuf_policy)
+ rx_count = atomic_read(&asoc->rmem_alloc);
+ else
+ rx_count = atomic_read(&asoc->base.sk->sk_rmem_alloc);
+
+ /* If we've reached or overflowed our receive buffer, announce
+ * a 0 rwnd if rwnd would still be positive. Store the
+ * the pottential pressure overflow so that the window can be restored
+ * back to original value.
+ */
+ if (rx_count >= asoc->base.sk->sk_rcvbuf)
+ over = 1;
+
if (asoc->rwnd >= len) {
asoc->rwnd -= len;
+ if (over) {
+ asoc->rwnd_press = asoc->rwnd;
+ asoc->rwnd = 0;
+ }
} else {
asoc->rwnd_over = len - asoc->rwnd;
asoc->rwnd = 0;
}
- SCTP_DEBUG_PRINTK("%s: asoc %p rwnd decreased by %d to (%u, %u)\n",
+ SCTP_DEBUG_PRINTK("%s: asoc %p rwnd decreased by %d to (%u, %u, %u)\n",
__func__, asoc, len, asoc->rwnd,
- asoc->rwnd_over);
+ asoc->rwnd_over, asoc->rwnd_press);
}
/* Build the bind address list for the association based on info from the
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index 6d5944a..13a6fba 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -510,9 +510,28 @@
* of requested destination address, sender and receiver
* SHOULD include all of its addresses with level greater
* than or equal to L.
+ *
+ * Address scoping can be selectively controlled via sysctl
+ * option
*/
- if (addr_scope <= scope)
+ switch (sctp_scope_policy) {
+ case SCTP_SCOPE_POLICY_DISABLE:
return 1;
+ case SCTP_SCOPE_POLICY_ENABLE:
+ if (addr_scope <= scope)
+ return 1;
+ break;
+ case SCTP_SCOPE_POLICY_PRIVATE:
+ if (addr_scope <= scope || SCTP_SCOPE_PRIVATE == addr_scope)
+ return 1;
+ break;
+ case SCTP_SCOPE_POLICY_LINK:
+ if (addr_scope <= scope || SCTP_SCOPE_LINK == addr_scope)
+ return 1;
+ break;
+ default:
+ break;
+ }
return 0;
}
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index 1748ef9..acf7c4d 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -59,6 +59,7 @@
msg->can_abandon = 0;
msg->expires_at = 0;
INIT_LIST_HEAD(&msg->chunks);
+ msg->msg_size = 0;
}
/* Allocate and initialize datamsg. */
@@ -73,6 +74,19 @@
return msg;
}
+void sctp_datamsg_free(struct sctp_datamsg *msg)
+{
+ struct sctp_chunk *chunk;
+
+ /* This doesn't have to be a _safe vairant because
+ * sctp_chunk_free() only drops the refs.
+ */
+ list_for_each_entry(chunk, &msg->chunks, frag_list)
+ sctp_chunk_free(chunk);
+
+ sctp_datamsg_put(msg);
+}
+
/* Final destructruction of datamsg memory. */
static void sctp_datamsg_destroy(struct sctp_datamsg *msg)
{
@@ -142,6 +156,7 @@
{
sctp_datamsg_hold(msg);
chunk->msg = msg;
+ msg->msg_size += chunk->skb->len;
}
@@ -158,6 +173,7 @@
{
int max, whole, i, offset, over, err;
int len, first_len;
+ int max_data;
struct sctp_chunk *chunk;
struct sctp_datamsg *msg;
struct list_head *pos, *temp;
@@ -179,8 +195,14 @@
__func__, msg, msg->expires_at, jiffies);
}
- max = asoc->frag_point;
+ /* This is the biggest possible DATA chunk that can fit into
+ * the packet
+ */
+ max_data = asoc->pathmtu -
+ sctp_sk(asoc->base.sk)->pf->af->net_header_len -
+ sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk);
+ max = asoc->frag_point;
/* If the the peer requested that we authenticate DATA chunks
* we need to accound for bundling of the AUTH chunks along with
* DATA.
@@ -189,23 +211,41 @@
struct sctp_hmac *hmac_desc = sctp_auth_asoc_get_hmac(asoc);
if (hmac_desc)
- max -= WORD_ROUND(sizeof(sctp_auth_chunk_t) +
+ max_data -= WORD_ROUND(sizeof(sctp_auth_chunk_t) +
hmac_desc->hmac_len);
}
+ /* Now, check if we need to reduce our max */
+ if (max > max_data)
+ max = max_data;
+
whole = 0;
first_len = max;
- /* Encourage Cookie-ECHO bundling. */
- if (asoc->state < SCTP_STATE_COOKIE_ECHOED) {
- whole = msg_len / (max - SCTP_ARBITRARY_COOKIE_ECHO_LEN);
+ /* Check to see if we have a pending SACK and try to let it be bundled
+ * with this message. Do this if we don't have any data queued already.
+ * To check that, look at out_qlen and retransmit list.
+ * NOTE: we will not reduce to account for SACK, if the message would
+ * not have been fragmented.
+ */
+ if (timer_pending(&asoc->timers[SCTP_EVENT_TIMEOUT_SACK]) &&
+ asoc->outqueue.out_qlen == 0 &&
+ list_empty(&asoc->outqueue.retransmit) &&
+ msg_len > max)
+ max_data -= WORD_ROUND(sizeof(sctp_sack_chunk_t));
- /* Account for the DATA to be bundled with the COOKIE-ECHO. */
- if (whole) {
- first_len = max - SCTP_ARBITRARY_COOKIE_ECHO_LEN;
- msg_len -= first_len;
- whole = 1;
- }
+ /* Encourage Cookie-ECHO bundling. */
+ if (asoc->state < SCTP_STATE_COOKIE_ECHOED)
+ max_data -= SCTP_ARBITRARY_COOKIE_ECHO_LEN;
+
+ /* Now that we adjusted completely, reset first_len */
+ if (first_len > max_data)
+ first_len = max_data;
+
+ /* Account for a different sized first fragment */
+ if (msg_len >= first_len) {
+ msg_len -= first_len;
+ whole = 1;
}
/* How many full sized? How many bytes leftover? */
diff --git a/net/sctp/debug.c b/net/sctp/debug.c
index 7ff548a..bf24fa6 100644
--- a/net/sctp/debug.c
+++ b/net/sctp/debug.c
@@ -52,7 +52,7 @@
#endif /* SCTP_DEBUG */
/* These are printable forms of Chunk ID's from section 3.1. */
-static const char *sctp_cid_tbl[SCTP_NUM_BASE_CHUNK_TYPES] = {
+static const char *const sctp_cid_tbl[SCTP_NUM_BASE_CHUNK_TYPES] = {
"DATA",
"INIT",
"INIT_ACK",
@@ -97,7 +97,7 @@
}
/* These are printable forms of the states. */
-const char *sctp_state_tbl[SCTP_STATE_NUM_STATES] = {
+const char *const sctp_state_tbl[SCTP_STATE_NUM_STATES] = {
"STATE_EMPTY",
"STATE_CLOSED",
"STATE_COOKIE_WAIT",
@@ -110,7 +110,7 @@
};
/* Events that could change the state of an association. */
-const char *sctp_evttype_tbl[] = {
+const char *const sctp_evttype_tbl[] = {
"EVENT_T_unknown",
"EVENT_T_CHUNK",
"EVENT_T_TIMEOUT",
@@ -119,7 +119,7 @@
};
/* Return value of a state function */
-const char *sctp_status_tbl[] = {
+const char *const sctp_status_tbl[] = {
"DISPOSITION_DISCARD",
"DISPOSITION_CONSUME",
"DISPOSITION_NOMEM",
@@ -132,7 +132,7 @@
};
/* Printable forms of primitives */
-static const char *sctp_primitive_tbl[SCTP_NUM_PRIMITIVE_TYPES] = {
+static const char *const sctp_primitive_tbl[SCTP_NUM_PRIMITIVE_TYPES] = {
"PRIMITIVE_ASSOCIATE",
"PRIMITIVE_SHUTDOWN",
"PRIMITIVE_ABORT",
@@ -149,7 +149,7 @@
return "unknown_primitive";
}
-static const char *sctp_other_tbl[] = {
+static const char *const sctp_other_tbl[] = {
"NO_PENDING_TSN",
"ICMP_PROTO_UNREACH",
};
@@ -162,7 +162,7 @@
return "unknown 'other' event";
}
-static const char *sctp_timer_tbl[] = {
+static const char *const sctp_timer_tbl[] = {
"TIMEOUT_NONE",
"TIMEOUT_T1_COOKIE",
"TIMEOUT_T1_INIT",
diff --git a/net/sctp/output.c b/net/sctp/output.c
index b94c211..5cbda8f 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -61,8 +61,24 @@
#include <net/sctp/checksum.h>
/* Forward declarations for private helpers. */
-static sctp_xmit_t sctp_packet_append_data(struct sctp_packet *packet,
+static sctp_xmit_t sctp_packet_can_append_data(struct sctp_packet *packet,
struct sctp_chunk *chunk);
+static void sctp_packet_append_data(struct sctp_packet *packet,
+ struct sctp_chunk *chunk);
+static sctp_xmit_t sctp_packet_will_fit(struct sctp_packet *packet,
+ struct sctp_chunk *chunk,
+ u16 chunk_len);
+
+static void sctp_packet_reset(struct sctp_packet *packet)
+{
+ packet->size = packet->overhead;
+ packet->has_cookie_echo = 0;
+ packet->has_sack = 0;
+ packet->has_data = 0;
+ packet->has_auth = 0;
+ packet->ipfragok = 0;
+ packet->auth = NULL;
+}
/* Config a packet.
* This appears to be a followup set of initializations.
@@ -75,13 +91,8 @@
SCTP_DEBUG_PRINTK("%s: packet:%p vtag:0x%x\n", __func__,
packet, vtag);
+ sctp_packet_reset(packet);
packet->vtag = vtag;
- packet->has_cookie_echo = 0;
- packet->has_sack = 0;
- packet->has_auth = 0;
- packet->has_data = 0;
- packet->ipfragok = 0;
- packet->auth = NULL;
if (ecn_capable && sctp_packet_empty(packet)) {
chunk = sctp_get_ecne_prepend(packet->transport->asoc);
@@ -119,15 +130,9 @@
}
overhead += sizeof(struct sctphdr);
packet->overhead = overhead;
- packet->size = overhead;
+ sctp_packet_reset(packet);
packet->vtag = 0;
- packet->has_cookie_echo = 0;
- packet->has_sack = 0;
- packet->has_auth = 0;
- packet->has_data = 0;
- packet->ipfragok = 0;
packet->malloced = 0;
- packet->auth = NULL;
return packet;
}
@@ -204,7 +209,7 @@
/* See if this is an auth chunk we are bundling or if
* auth is already bundled.
*/
- if (chunk->chunk_hdr->type == SCTP_CID_AUTH || pkt->auth)
+ if (chunk->chunk_hdr->type == SCTP_CID_AUTH || pkt->has_auth)
return retval;
/* if the peer did not request this chunk to be authenticated,
@@ -234,18 +239,19 @@
if (sctp_chunk_is_data(chunk) && !pkt->has_sack &&
!pkt->has_cookie_echo) {
struct sctp_association *asoc;
+ struct timer_list *timer;
asoc = pkt->transport->asoc;
+ timer = &asoc->timers[SCTP_EVENT_TIMEOUT_SACK];
- if (asoc->a_rwnd > asoc->rwnd) {
+ /* If the SACK timer is running, we have a pending SACK */
+ if (timer_pending(timer)) {
struct sctp_chunk *sack;
asoc->a_rwnd = asoc->rwnd;
sack = sctp_make_sack(asoc);
if (sack) {
- struct timer_list *timer;
retval = sctp_packet_append_chunk(pkt, sack);
asoc->peer.sack_needed = 0;
- timer = &asoc->timers[SCTP_EVENT_TIMEOUT_SACK];
- if (timer_pending(timer) && del_timer(timer))
+ if (del_timer(timer))
sctp_association_put(asoc);
}
}
@@ -261,13 +267,20 @@
{
sctp_xmit_t retval = SCTP_XMIT_OK;
__u16 chunk_len = WORD_ROUND(ntohs(chunk->chunk_hdr->length));
- size_t psize;
- size_t pmtu;
- int too_big;
SCTP_DEBUG_PRINTK("%s: packet:%p chunk:%p\n", __func__, packet,
chunk);
+ /* Data chunks are special. Before seeing what else we can
+ * bundle into this packet, check to see if we are allowed to
+ * send this DATA.
+ */
+ if (sctp_chunk_is_data(chunk)) {
+ retval = sctp_packet_can_append_data(packet, chunk);
+ if (retval != SCTP_XMIT_OK)
+ goto finish;
+ }
+
/* Try to bundle AUTH chunk */
retval = sctp_packet_bundle_auth(packet, chunk);
if (retval != SCTP_XMIT_OK)
@@ -278,51 +291,16 @@
if (retval != SCTP_XMIT_OK)
goto finish;
- psize = packet->size;
- pmtu = ((packet->transport->asoc) ?
- (packet->transport->asoc->pathmtu) :
- (packet->transport->pathmtu));
+ /* Check to see if this chunk will fit into the packet */
+ retval = sctp_packet_will_fit(packet, chunk, chunk_len);
+ if (retval != SCTP_XMIT_OK)
+ goto finish;
- too_big = (psize + chunk_len > pmtu);
-
- /* Decide if we need to fragment or resubmit later. */
- if (too_big) {
- /* It's OK to fragmet at IP level if any one of the following
- * is true:
- * 1. The packet is empty (meaning this chunk is greater
- * the MTU)
- * 2. The chunk we are adding is a control chunk
- * 3. The packet doesn't have any data in it yet and data
- * requires authentication.
- */
- if (sctp_packet_empty(packet) || !sctp_chunk_is_data(chunk) ||
- (!packet->has_data && chunk->auth)) {
- /* We no longer do re-fragmentation.
- * Just fragment at the IP layer, if we
- * actually hit this condition
- */
- packet->ipfragok = 1;
- goto append;
-
- } else {
- retval = SCTP_XMIT_PMTU_FULL;
- goto finish;
- }
- }
-
-append:
- /* We believe that this chunk is OK to add to the packet (as
- * long as we have the cwnd for it).
- */
-
- /* DATA is a special case since we must examine both rwnd and cwnd
- * before we send DATA.
- */
+ /* We believe that this chunk is OK to add to the packet */
switch (chunk->chunk_hdr->type) {
case SCTP_CID_DATA:
- retval = sctp_packet_append_data(packet, chunk);
- if (SCTP_XMIT_OK != retval)
- goto finish;
+ /* Account for the data being in the packet */
+ sctp_packet_append_data(packet, chunk);
/* Disallow SACK bundling after DATA. */
packet->has_sack = 1;
/* Disallow AUTH bundling after DATA */
@@ -598,7 +576,7 @@
(*tp->af_specific->sctp_xmit)(nskb, tp);
out:
- packet->size = packet->overhead;
+ sctp_packet_reset(packet);
return err;
no_route:
kfree_skb(nskb);
@@ -632,16 +610,15 @@
* 2nd Level Abstractions
********************************************************************/
-/* This private function handles the specifics of appending DATA chunks. */
-static sctp_xmit_t sctp_packet_append_data(struct sctp_packet *packet,
+/* This private function check to see if a chunk can be added */
+static sctp_xmit_t sctp_packet_can_append_data(struct sctp_packet *packet,
struct sctp_chunk *chunk)
{
sctp_xmit_t retval = SCTP_XMIT_OK;
- size_t datasize, rwnd, inflight;
+ size_t datasize, rwnd, inflight, flight_size;
struct sctp_transport *transport = packet->transport;
__u32 max_burst_bytes;
struct sctp_association *asoc = transport->asoc;
- struct sctp_sock *sp = sctp_sk(asoc->base.sk);
struct sctp_outq *q = &asoc->outqueue;
/* RFC 2960 6.1 Transmission of DATA Chunks
@@ -658,7 +635,8 @@
*/
rwnd = asoc->peer.rwnd;
- inflight = asoc->outqueue.outstanding_bytes;
+ inflight = q->outstanding_bytes;
+ flight_size = transport->flight_size;
datasize = sctp_data_size(chunk);
@@ -681,8 +659,8 @@
* cwnd = flightsize + Max.Burst * MTU
*/
max_burst_bytes = asoc->max_burst * asoc->pathmtu;
- if ((transport->flight_size + max_burst_bytes) < transport->cwnd) {
- transport->cwnd = transport->flight_size + max_burst_bytes;
+ if ((flight_size + max_burst_bytes) < transport->cwnd) {
+ transport->cwnd = flight_size + max_burst_bytes;
SCTP_DEBUG_PRINTK("%s: cwnd limited by max_burst: "
"transport: %p, cwnd: %d, "
"ssthresh: %d, flight_size: %d, "
@@ -707,7 +685,7 @@
* ignore the value of cwnd and SHOULD NOT delay retransmission.
*/
if (chunk->fast_retransmit != SCTP_NEED_FRTX)
- if (transport->flight_size >= transport->cwnd) {
+ if (flight_size >= transport->cwnd) {
retval = SCTP_XMIT_RWND_FULL;
goto finish;
}
@@ -717,20 +695,36 @@
* if any previously transmitted data on the connection remains
* unacknowledged.
*/
- if (!sp->nodelay && sctp_packet_empty(packet) &&
- q->outstanding_bytes && sctp_state(asoc, ESTABLISHED)) {
- unsigned len = datasize + q->out_qlen;
+ if (!sctp_sk(asoc->base.sk)->nodelay && sctp_packet_empty(packet) &&
+ inflight && sctp_state(asoc, ESTABLISHED)) {
+ unsigned max = transport->pathmtu - packet->overhead;
+ unsigned len = chunk->skb->len + q->out_qlen;
/* Check whether this chunk and all the rest of pending
* data will fit or delay in hopes of bundling a full
* sized packet.
+ * Don't delay large message writes that may have been
+ * fragmeneted into small peices.
*/
- if (len < asoc->frag_point) {
+ if ((len < max) && (chunk->msg->msg_size < max)) {
retval = SCTP_XMIT_NAGLE_DELAY;
goto finish;
}
}
+finish:
+ return retval;
+}
+
+/* This private function does management things when adding DATA chunk */
+static void sctp_packet_append_data(struct sctp_packet *packet,
+ struct sctp_chunk *chunk)
+{
+ struct sctp_transport *transport = packet->transport;
+ size_t datasize = sctp_data_size(chunk);
+ struct sctp_association *asoc = transport->asoc;
+ u32 rwnd = asoc->peer.rwnd;
+
/* Keep track of how many bytes are in flight over this transport. */
transport->flight_size += datasize;
@@ -753,7 +747,45 @@
/* Has been accepted for transmission. */
if (!asoc->peer.prsctp_capable)
chunk->msg->can_abandon = 0;
+}
-finish:
+static sctp_xmit_t sctp_packet_will_fit(struct sctp_packet *packet,
+ struct sctp_chunk *chunk,
+ u16 chunk_len)
+{
+ size_t psize;
+ size_t pmtu;
+ int too_big;
+ sctp_xmit_t retval = SCTP_XMIT_OK;
+
+ psize = packet->size;
+ pmtu = ((packet->transport->asoc) ?
+ (packet->transport->asoc->pathmtu) :
+ (packet->transport->pathmtu));
+
+ too_big = (psize + chunk_len > pmtu);
+
+ /* Decide if we need to fragment or resubmit later. */
+ if (too_big) {
+ /* It's OK to fragmet at IP level if any one of the following
+ * is true:
+ * 1. The packet is empty (meaning this chunk is greater
+ * the MTU)
+ * 2. The chunk we are adding is a control chunk
+ * 3. The packet doesn't have any data in it yet and data
+ * requires authentication.
+ */
+ if (sctp_packet_empty(packet) || !sctp_chunk_is_data(chunk) ||
+ (!packet->has_data && chunk->auth)) {
+ /* We no longer do re-fragmentation.
+ * Just fragment at the IP layer, if we
+ * actually hit this condition
+ */
+ packet->ipfragok = 1;
+ } else {
+ retval = SCTP_XMIT_PMTU_FULL;
+ }
+ }
+
return retval;
}
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index d765fc5..c9f20e2 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -406,8 +406,9 @@
* not be retransmitted
*/
if (!chunk->tsn_gap_acked) {
- chunk->transport->flight_size -=
- sctp_data_size(chunk);
+ if (chunk->transport)
+ chunk->transport->flight_size -=
+ sctp_data_size(chunk);
q->outstanding_bytes -= sctp_data_size(chunk);
q->asoc->peer.rwnd += (sctp_data_size(chunk) +
sizeof(struct sk_buff));
@@ -443,7 +444,8 @@
q->asoc->peer.rwnd += (sctp_data_size(chunk) +
sizeof(struct sk_buff));
q->outstanding_bytes -= sctp_data_size(chunk);
- transport->flight_size -= sctp_data_size(chunk);
+ if (chunk->transport)
+ transport->flight_size -= sctp_data_size(chunk);
/* sctpimpguide-05 Section 2.8.2
* M5) If a T3-rtx timer expires, the
@@ -1310,6 +1312,7 @@
__u32 rtt;
__u8 restart_timer = 0;
int bytes_acked = 0;
+ int migrate_bytes = 0;
/* These state variables are for coherent debug output. --xguo */
@@ -1343,8 +1346,9 @@
* considering it as 'outstanding'.
*/
if (!tchunk->tsn_gap_acked) {
- tchunk->transport->flight_size -=
- sctp_data_size(tchunk);
+ if (tchunk->transport)
+ tchunk->transport->flight_size -=
+ sctp_data_size(tchunk);
q->outstanding_bytes -= sctp_data_size(tchunk);
}
continue;
@@ -1378,6 +1382,20 @@
rtt);
}
}
+
+ /* If the chunk hasn't been marked as ACKED,
+ * mark it and account bytes_acked if the
+ * chunk had a valid transport (it will not
+ * have a transport if ASCONF had deleted it
+ * while DATA was outstanding).
+ */
+ if (!tchunk->tsn_gap_acked) {
+ tchunk->tsn_gap_acked = 1;
+ bytes_acked += sctp_data_size(tchunk);
+ if (!tchunk->transport)
+ migrate_bytes += sctp_data_size(tchunk);
+ }
+
if (TSN_lte(tsn, sack_ctsn)) {
/* RFC 2960 6.3.2 Retransmission Timer Rules
*
@@ -1391,8 +1409,6 @@
restart_timer = 1;
if (!tchunk->tsn_gap_acked) {
- tchunk->tsn_gap_acked = 1;
- bytes_acked += sctp_data_size(tchunk);
/*
* SFR-CACC algorithm:
* 2) If the SACK contains gap acks
@@ -1432,10 +1448,6 @@
* older than that newly acknowledged DATA
* chunk, are qualified as 'Stray DATA chunks'.
*/
- if (!tchunk->tsn_gap_acked) {
- tchunk->tsn_gap_acked = 1;
- bytes_acked += sctp_data_size(tchunk);
- }
list_add_tail(lchunk, &tlist);
}
@@ -1491,7 +1503,8 @@
tsn);
tchunk->tsn_gap_acked = 0;
- bytes_acked -= sctp_data_size(tchunk);
+ if (tchunk->transport)
+ bytes_acked -= sctp_data_size(tchunk);
/* RFC 2960 6.3.2 Retransmission Timer Rules
*
@@ -1561,6 +1574,14 @@
#endif /* SCTP_DEBUG */
if (transport) {
if (bytes_acked) {
+ /* We may have counted DATA that was migrated
+ * to this transport due to DEL-IP operation.
+ * Subtract those bytes, since the were never
+ * send on this transport and shouldn't be
+ * credited to this transport.
+ */
+ bytes_acked -= migrate_bytes;
+
/* 8.2. When an outstanding TSN is acknowledged,
* the endpoint shall clear the error counter of
* the destination transport address to which the
@@ -1589,7 +1610,7 @@
transport->flight_size -= bytes_acked;
if (transport->flight_size == 0)
transport->partial_bytes_acked = 0;
- q->outstanding_bytes -= bytes_acked;
+ q->outstanding_bytes -= bytes_acked + migrate_bytes;
} else {
/* RFC 2960 6.1, sctpimpguide-06 2.15.2
* When a sender is doing zero window probing, it
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index f268910..d093cbf 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -512,10 +512,8 @@
{
struct proc_dir_entry *p;
- p = create_proc_entry("remaddr", S_IRUGO, proc_net_sctp);
+ p = proc_create("remaddr", S_IRUGO, proc_net_sctp, &sctp_remaddr_seq_fops);
if (!p)
return -ENOMEM;
- p->proc_fops = &sctp_remaddr_seq_fops;
-
return 0;
}
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index a76da65..60093be 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -431,16 +431,14 @@
* of requested destination address, sender and receiver
* SHOULD include all of its addresses with level greater
* than or equal to L.
+ *
+ * IPv4 scoping can be controlled through sysctl option
+ * net.sctp.addr_scope_policy
*/
static sctp_scope_t sctp_v4_scope(union sctp_addr *addr)
{
sctp_scope_t retval;
- /* Should IPv4 scoping be a sysctl configurable option
- * so users can turn it off (default on) for certain
- * unconventional networking environments?
- */
-
/* Check for unusable SCTP addresses. */
if (IS_IPV4_UNUSABLE_ADDRESS(addr->v4.sin_addr.s_addr)) {
retval = SCTP_SCOPE_UNUSABLE;
@@ -1259,6 +1257,9 @@
/* Disable AUTH by default. */
sctp_auth_enable = 0;
+ /* Set SCOPE policy to enabled */
+ sctp_scope_policy = SCTP_SCOPE_POLICY_ENABLE;
+
sctp_sysctl_register();
INIT_LIST_HEAD(&sctp_address_families);
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 61cc607..9d881a6 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2861,6 +2861,11 @@
addr_param = (union sctp_addr_param *)
((void *)asconf_param + sizeof(sctp_addip_param_t));
+ if (asconf_param->param_hdr.type != SCTP_PARAM_ADD_IP &&
+ asconf_param->param_hdr.type != SCTP_PARAM_DEL_IP &&
+ asconf_param->param_hdr.type != SCTP_PARAM_SET_PRIMARY)
+ return SCTP_ERROR_UNKNOWN_PARAM;
+
switch (addr_param->v4.param_hdr.type) {
case SCTP_PARAM_IPV6_ADDRESS:
if (!asoc->peer.ipv6_address)
@@ -2958,9 +2963,6 @@
sctp_assoc_set_primary(asoc, peer);
break;
- default:
- return SCTP_ERROR_UNKNOWN_PARAM;
- break;
}
return SCTP_ERROR_NO_ERROR;
@@ -3104,7 +3106,7 @@
}
/* Process a asconf parameter that is successfully acked. */
-static int sctp_asconf_param_success(struct sctp_association *asoc,
+static void sctp_asconf_param_success(struct sctp_association *asoc,
sctp_addip_param_t *asconf_param)
{
struct sctp_af *af;
@@ -3113,7 +3115,6 @@
union sctp_addr_param *addr_param;
struct sctp_transport *transport;
struct sctp_sockaddr_entry *saddr;
- int retval = 0;
addr_param = (union sctp_addr_param *)
((void *)asconf_param + sizeof(sctp_addip_param_t));
@@ -3133,10 +3134,18 @@
saddr->state = SCTP_ADDR_SRC;
}
local_bh_enable();
+ list_for_each_entry(transport, &asoc->peer.transport_addr_list,
+ transports) {
+ if (transport->state == SCTP_ACTIVE)
+ continue;
+ dst_release(transport->dst);
+ sctp_transport_route(transport, NULL,
+ sctp_sk(asoc->base.sk));
+ }
break;
case SCTP_PARAM_DEL_IP:
local_bh_disable();
- retval = sctp_del_bind_addr(bp, &addr);
+ sctp_del_bind_addr(bp, &addr);
local_bh_enable();
list_for_each_entry(transport, &asoc->peer.transport_addr_list,
transports) {
@@ -3148,8 +3157,6 @@
default:
break;
}
-
- return retval;
}
/* Get the corresponding ASCONF response error code from the ASCONF_ACK chunk
@@ -3266,7 +3273,7 @@
switch (err_code) {
case SCTP_ERROR_NO_ERROR:
- retval = sctp_asconf_param_success(asoc, asconf_param);
+ sctp_asconf_param_success(asoc, asconf_param);
break;
case SCTP_ERROR_RSRC_LOW:
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 86426aa..8674d49 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -440,14 +440,26 @@
/* The check for association's overall error counter exceeding the
* threshold is done in the state function.
*/
- /* When probing UNCONFIRMED addresses, the association overall
- * error count is NOT incremented
+ /* We are here due to a timer expiration. If the timer was
+ * not a HEARTBEAT, then normal error tracking is done.
+ * If the timer was a heartbeat, we only increment error counts
+ * when we already have an outstanding HEARTBEAT that has not
+ * been acknowledged.
+ * Additionaly, some tranport states inhibit error increments.
*/
- if (transport->state != SCTP_UNCONFIRMED)
+ if (!is_hb) {
asoc->overall_error_count++;
+ if (transport->state != SCTP_INACTIVE)
+ transport->error_count++;
+ } else if (transport->hb_sent) {
+ if (transport->state != SCTP_UNCONFIRMED)
+ asoc->overall_error_count++;
+ if (transport->state != SCTP_INACTIVE)
+ transport->error_count++;
+ }
if (transport->state != SCTP_INACTIVE &&
- (transport->error_count++ >= transport->pathmaxrxt)) {
+ (transport->error_count > transport->pathmaxrxt)) {
SCTP_DEBUG_PRINTK_IPADDR("transport_strike:association %p",
" transport IP: port:%d failed.\n",
asoc,
@@ -931,6 +943,27 @@
}
+/* Send the whole message, chunk by chunk, to the outqueue.
+ * This way the whole message is queued up and bundling if
+ * encouraged for small fragments.
+ */
+static int sctp_cmd_send_msg(struct sctp_association *asoc,
+ struct sctp_datamsg *msg)
+{
+ struct sctp_chunk *chunk;
+ int error = 0;
+
+ list_for_each_entry(chunk, &msg->chunks, frag_list) {
+ error = sctp_outq_tail(&asoc->outqueue, chunk);
+ if (error)
+ break;
+ }
+
+ return error;
+}
+
+
+
/* These three macros allow us to pull the debugging code out of the
* main flow of sctp_do_sm() to keep attention focused on the real
* functionality there.
@@ -1500,7 +1533,8 @@
case SCTP_CMD_PROCESS_CTSN:
/* Dummy up a SACK for processing. */
sackh.cum_tsn_ack = cmd->obj.be32;
- sackh.a_rwnd = 0;
+ sackh.a_rwnd = asoc->peer.rwnd +
+ asoc->outqueue.outstanding_bytes;
sackh.num_gap_ack_blocks = 0;
sackh.num_dup_tsns = 0;
sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_SACK,
@@ -1575,7 +1609,13 @@
case SCTP_CMD_UPDATE_INITTAG:
asoc->peer.i.init_tag = cmd->obj.u32;
break;
-
+ case SCTP_CMD_SEND_MSG:
+ if (!asoc->outqueue.cork) {
+ sctp_outq_cork(&asoc->outqueue);
+ local_cork = 1;
+ }
+ error = sctp_cmd_send_msg(asoc, cmd->obj.msg);
+ break;
default:
printk(KERN_WARNING "Impossible command: %u, %p\n",
cmd->verb, cmd->obj.ptr);
@@ -1593,9 +1633,9 @@
*/
if (asoc && SCTP_EVENT_T_CHUNK == event_type && chunk) {
if (chunk->end_of_packet || chunk->singleton)
- sctp_outq_uncork(&asoc->outqueue);
+ error = sctp_outq_uncork(&asoc->outqueue);
} else if (local_cork)
- sctp_outq_uncork(&asoc->outqueue);
+ error = sctp_outq_uncork(&asoc->outqueue);
return error;
nomem:
error = -ENOMEM;
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 7288192..c8fae19 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -334,6 +334,15 @@
if (!sctp_chunk_length_valid(chunk, sizeof(sctp_init_chunk_t)))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
+ /* If the INIT is coming toward a closing socket, we'll send back
+ * and ABORT. Essentially, this catches the race of INIT being
+ * backloged to the socket at the same time as the user isses close().
+ * Since the socket and all its associations are going away, we
+ * can treat this OOTB
+ */
+ if (sctp_sstate(ep->base.sk, CLOSING))
+ return sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands);
+
/* Verify the INIT chunk before processing it. */
err_chunk = NULL;
if (!sctp_verify_init(asoc, chunk->chunk_hdr->type,
@@ -962,7 +971,7 @@
{
struct sctp_transport *transport = (struct sctp_transport *) arg;
- if (asoc->overall_error_count > asoc->max_retrans) {
+ if (asoc->overall_error_count >= asoc->max_retrans) {
sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
SCTP_ERROR(ETIMEDOUT));
/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
@@ -1106,7 +1115,8 @@
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
/* Make sure that the HEARTBEAT-ACK chunk has a valid length. */
- if (!sctp_chunk_length_valid(chunk, sizeof(sctp_heartbeat_chunk_t)))
+ if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t) +
+ sizeof(sctp_sender_hb_info_t)))
return sctp_sf_violation_chunklen(ep, asoc, type, arg,
commands);
@@ -2561,6 +2571,12 @@
chunk->subh.shutdown_hdr = sdh;
ctsn = ntohl(sdh->cum_tsn_ack);
+ if (TSN_lt(ctsn, asoc->ctsn_ack_point)) {
+ SCTP_DEBUG_PRINTK("ctsn %x\n", ctsn);
+ SCTP_DEBUG_PRINTK("ctsn_ack_point %x\n", asoc->ctsn_ack_point);
+ return SCTP_DISPOSITION_DISCARD;
+ }
+
/* If Cumulative TSN Ack beyond the max tsn currently
* send, terminating the association and respond to the
* sender with an ABORT.
@@ -2624,6 +2640,7 @@
{
struct sctp_chunk *chunk = arg;
sctp_shutdownhdr_t *sdh;
+ __u32 ctsn;
if (!sctp_vtag_verify(chunk, asoc))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -2635,12 +2652,19 @@
commands);
sdh = (sctp_shutdownhdr_t *)chunk->skb->data;
+ ctsn = ntohl(sdh->cum_tsn_ack);
+
+ if (TSN_lt(ctsn, asoc->ctsn_ack_point)) {
+ SCTP_DEBUG_PRINTK("ctsn %x\n", ctsn);
+ SCTP_DEBUG_PRINTK("ctsn_ack_point %x\n", asoc->ctsn_ack_point);
+ return SCTP_DISPOSITION_DISCARD;
+ }
/* If Cumulative TSN Ack beyond the max tsn currently
* send, terminating the association and respond to the
* sender with an ABORT.
*/
- if (!TSN_lt(ntohl(sdh->cum_tsn_ack), asoc->next_tsn))
+ if (!TSN_lt(ctsn, asoc->next_tsn))
return sctp_sf_violation_ctsn(ep, asoc, type, arg, commands);
/* verify, by checking the Cumulative TSN Ack field of the
@@ -2867,6 +2891,9 @@
goto discard_force;
case SCTP_IERROR_NO_DATA:
goto consume;
+ case SCTP_IERROR_PROTO_VIOLATION:
+ return sctp_sf_abort_violation(ep, asoc, chunk, commands,
+ (u8 *)chunk->subh.data_hdr, sizeof(sctp_datahdr_t));
default:
BUG();
}
@@ -2977,6 +3004,9 @@
break;
case SCTP_IERROR_NO_DATA:
goto consume;
+ case SCTP_IERROR_PROTO_VIOLATION:
+ return sctp_sf_abort_violation(ep, asoc, chunk, commands,
+ (u8 *)chunk->subh.data_hdr, sizeof(sctp_datahdr_t));
default:
BUG();
}
@@ -3519,6 +3549,12 @@
asconf_ack = sctp_assoc_lookup_asconf_ack(asoc, hdr->serial);
if (!asconf_ack)
return SCTP_DISPOSITION_DISCARD;
+
+ /* Reset the transport so that we select the correct one
+ * this time around. This is to make sure that we don't
+ * accidentally use a stale transport that's been removed.
+ */
+ asconf_ack->transport = NULL;
} else {
/* ADDIP 5.2 E5) Otherwise, the ASCONF Chunk is discarded since
* it must be either a stale packet or from an attacker.
@@ -4546,9 +4582,9 @@
void *arg,
sctp_cmd_seq_t *commands)
{
- struct sctp_chunk *chunk = arg;
+ struct sctp_datamsg *msg = arg;
- sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(chunk));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SEND_MSG, SCTP_DATAMSG(msg));
return SCTP_DISPOSITION_CONSUME;
}
@@ -5847,6 +5883,9 @@
__u32 tsn;
struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
struct sock *sk = asoc->base.sk;
+ u16 ssn;
+ u16 sid;
+ u8 ordered = 0;
data_hdr = chunk->subh.data_hdr = (sctp_datahdr_t *)chunk->skb->data;
skb_pull(chunk->skb, sizeof(sctp_datahdr_t));
@@ -5986,8 +6025,10 @@
*/
if (chunk->chunk_hdr->flags & SCTP_DATA_UNORDERED)
SCTP_INC_STATS(SCTP_MIB_INUNORDERCHUNKS);
- else
+ else {
SCTP_INC_STATS(SCTP_MIB_INORDERCHUNKS);
+ ordered = 1;
+ }
/* RFC 2960 6.5 Stream Identifier and Stream Sequence Number
*
@@ -5997,7 +6038,8 @@
* with cause set to "Invalid Stream Identifier" (See Section 3.3.10)
* and discard the DATA chunk.
*/
- if (ntohs(data_hdr->stream) >= asoc->c.sinit_max_instreams) {
+ sid = ntohs(data_hdr->stream);
+ if (sid >= asoc->c.sinit_max_instreams) {
/* Mark tsn as received even though we drop it */
sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_TSN, SCTP_U32(tsn));
@@ -6010,6 +6052,18 @@
return SCTP_IERROR_BAD_STREAM;
}
+ /* Check to see if the SSN is possible for this TSN.
+ * The biggest gap we can record is 4K wide. Since SSNs wrap
+ * at an unsigned short, there is no way that an SSN can
+ * wrap and for a valid TSN. We can simply check if the current
+ * SSN is smaller then the next expected one. If it is, it wrapped
+ * and is invalid.
+ */
+ ssn = ntohs(data_hdr->ssn);
+ if (ordered && SSN_lt(ssn, sctp_ssn_peek(&asoc->ssnmap->in, sid))) {
+ return SCTP_IERROR_PROTO_VIOLATION;
+ }
+
/* Send the data up to the user. Note: Schedule the
* SCTP_CMD_CHUNK_ULP cmd before the SCTP_CMD_GEN_SACK, as the SACK
* chunk needs the updated rwnd.
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 971890d..89af37a 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1361,6 +1361,7 @@
sctp_lock_sock(sk);
sk->sk_shutdown = SHUTDOWN_MASK;
+ sk->sk_state = SCTP_SS_CLOSING;
ep = sctp_sk(sk)->ep;
@@ -1813,20 +1814,22 @@
sctp_set_owner_w(chunk);
chunk->transport = chunk_tp;
-
- /* Send it to the lower layers. Note: all chunks
- * must either fail or succeed. The lower layer
- * works that way today. Keep it that way or this
- * breaks.
- */
- err = sctp_primitive_SEND(asoc, chunk);
- /* Did the lower layer accept the chunk? */
- if (err)
- sctp_chunk_free(chunk);
- SCTP_DEBUG_PRINTK("We sent primitively.\n");
}
- sctp_datamsg_put(datamsg);
+ /* Send it to the lower layers. Note: all chunks
+ * must either fail or succeed. The lower layer
+ * works that way today. Keep it that way or this
+ * breaks.
+ */
+ err = sctp_primitive_SEND(asoc, datamsg);
+ /* Did the lower layer accept the chunk? */
+ if (err)
+ sctp_datamsg_free(datamsg);
+ else
+ sctp_datamsg_put(datamsg);
+
+ SCTP_DEBUG_PRINTK("We sent primitively.\n");
+
if (err)
goto out_free;
else
@@ -2240,7 +2243,7 @@
sctp_assoc_sync_pmtu(asoc);
} else if (asoc) {
asoc->pathmtu = params->spp_pathmtu;
- sctp_frag_point(sp, params->spp_pathmtu);
+ sctp_frag_point(asoc, params->spp_pathmtu);
} else {
sp->pathmtu = params->spp_pathmtu;
}
@@ -2877,15 +2880,10 @@
val -= sizeof(struct sctphdr) +
sizeof(struct sctp_data_chunk);
}
-
- asoc->frag_point = val;
+ asoc->user_frag = val;
+ asoc->frag_point = sctp_frag_point(asoc, asoc->pathmtu);
} else {
sp->user_frag = val;
-
- /* Update the frag_point of the existing associations. */
- list_for_each_entry(asoc, &(sp->ep->asocs), asocs) {
- asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu);
- }
}
return 0;
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index 63eabbc..ab7151d 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -51,6 +51,7 @@
static int int_max = INT_MAX;
static int sack_timer_min = 1;
static int sack_timer_max = 500;
+static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
extern int sysctl_sctp_mem[3];
extern int sysctl_sctp_rmem[3];
@@ -272,6 +273,17 @@
.proc_handler = proc_dointvec,
.strategy = sysctl_intvec
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "addr_scope_policy",
+ .data = &sctp_scope_policy,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &addr_scope_max,
+ },
{ .ctl_name = 0 }
};
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index e5dde45..c256e48 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -503,6 +503,9 @@
transport->ssthresh = max(transport->cwnd/2,
4*transport->asoc->pathmtu);
transport->cwnd = transport->asoc->pathmtu;
+
+ /* T3-rtx also clears fast recovery on the transport */
+ transport->fast_recovery = 0;
break;
case SCTP_LOWER_CWND_FAST_RTX:
diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile
index db73fd2..9d2fca5 100644
--- a/net/sunrpc/Makefile
+++ b/net/sunrpc/Makefile
@@ -10,7 +10,7 @@
sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \
auth.o auth_null.o auth_unix.o auth_generic.o \
svc.o svcsock.o svcauth.o svcauth_unix.o \
- rpcb_clnt.o timer.o xdr.o \
+ addr.o rpcb_clnt.o timer.o xdr.o \
sunrpc_syms.o cache.o rpc_pipe.o \
svc_xprt.o
sunrpc-$(CONFIG_NFS_V4_1) += backchannel_rqst.o bc_svc.o
diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
new file mode 100644
index 0000000..22e8fd8
--- /dev/null
+++ b/net/sunrpc/addr.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright 2009, Oracle. All rights reserved.
+ *
+ * Convert socket addresses to presentation addresses and universal
+ * addresses, and vice versa.
+ *
+ * Universal addresses are introduced by RFC 1833 and further refined by
+ * recent RFCs describing NFSv4. The universal address format is part
+ * of the external (network) interface provided by rpcbind version 3
+ * and 4, and by NFSv4. Such an address is a string containing a
+ * presentation format IP address followed by a port number in
+ * "hibyte.lobyte" format.
+ *
+ * IPv6 addresses can also include a scope ID, typically denoted by
+ * a '%' followed by a device name or a non-negative integer. Refer to
+ * RFC 4291, Section 2.2 for details on IPv6 presentation formats.
+ */
+
+#include <net/ipv6.h>
+#include <linux/sunrpc/clnt.h>
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+
+static size_t rpc_ntop6_noscopeid(const struct sockaddr *sap,
+ char *buf, const int buflen)
+{
+ const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+ const struct in6_addr *addr = &sin6->sin6_addr;
+
+ /*
+ * RFC 4291, Section 2.2.2
+ *
+ * Shorthanded ANY address
+ */
+ if (ipv6_addr_any(addr))
+ return snprintf(buf, buflen, "::");
+
+ /*
+ * RFC 4291, Section 2.2.2
+ *
+ * Shorthanded loopback address
+ */
+ if (ipv6_addr_loopback(addr))
+ return snprintf(buf, buflen, "::1");
+
+ /*
+ * RFC 4291, Section 2.2.3
+ *
+ * Special presentation address format for mapped v4
+ * addresses.
+ */
+ if (ipv6_addr_v4mapped(addr))
+ return snprintf(buf, buflen, "::ffff:%pI4",
+ &addr->s6_addr32[3]);
+
+ /*
+ * RFC 4291, Section 2.2.1
+ *
+ * To keep the result as short as possible, especially
+ * since we don't shorthand, we don't want leading zeros
+ * in each halfword, so avoid %pI6.
+ */
+ return snprintf(buf, buflen, "%x:%x:%x:%x:%x:%x:%x:%x",
+ ntohs(addr->s6_addr16[0]), ntohs(addr->s6_addr16[1]),
+ ntohs(addr->s6_addr16[2]), ntohs(addr->s6_addr16[3]),
+ ntohs(addr->s6_addr16[4]), ntohs(addr->s6_addr16[5]),
+ ntohs(addr->s6_addr16[6]), ntohs(addr->s6_addr16[7]));
+}
+
+static size_t rpc_ntop6(const struct sockaddr *sap,
+ char *buf, const size_t buflen)
+{
+ const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+ char scopebuf[IPV6_SCOPE_ID_LEN];
+ size_t len;
+ int rc;
+
+ len = rpc_ntop6_noscopeid(sap, buf, buflen);
+ if (unlikely(len == 0))
+ return len;
+
+ if (!(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_SITELOCAL))
+ return len;
+
+ rc = snprintf(scopebuf, sizeof(scopebuf), "%c%u",
+ IPV6_SCOPE_DELIMITER, sin6->sin6_scope_id);
+ if (unlikely((size_t)rc > sizeof(scopebuf)))
+ return 0;
+
+ len += rc;
+ if (unlikely(len > buflen))
+ return 0;
+
+ strcat(buf, scopebuf);
+ return len;
+}
+
+#else /* !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)) */
+
+static size_t rpc_ntop6_noscopeid(const struct sockaddr *sap,
+ char *buf, const int buflen)
+{
+ return 0;
+}
+
+static size_t rpc_ntop6(const struct sockaddr *sap,
+ char *buf, const size_t buflen)
+{
+ return 0;
+}
+
+#endif /* !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)) */
+
+static int rpc_ntop4(const struct sockaddr *sap,
+ char *buf, const size_t buflen)
+{
+ const struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+
+ return snprintf(buf, buflen, "%pI4", &sin->sin_addr);
+}
+
+/**
+ * rpc_ntop - construct a presentation address in @buf
+ * @sap: socket address
+ * @buf: construction area
+ * @buflen: size of @buf, in bytes
+ *
+ * Plants a %NUL-terminated string in @buf and returns the length
+ * of the string, excluding the %NUL. Otherwise zero is returned.
+ */
+size_t rpc_ntop(const struct sockaddr *sap, char *buf, const size_t buflen)
+{
+ switch (sap->sa_family) {
+ case AF_INET:
+ return rpc_ntop4(sap, buf, buflen);
+ case AF_INET6:
+ return rpc_ntop6(sap, buf, buflen);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rpc_ntop);
+
+static size_t rpc_pton4(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+ u8 *addr = (u8 *)&sin->sin_addr.s_addr;
+
+ if (buflen > INET_ADDRSTRLEN || salen < sizeof(struct sockaddr_in))
+ return 0;
+
+ memset(sap, 0, sizeof(struct sockaddr_in));
+
+ if (in4_pton(buf, buflen, addr, '\0', NULL) == 0)
+ return 0;
+
+ sin->sin_family = AF_INET;
+ return sizeof(struct sockaddr_in);;
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static int rpc_parse_scope_id(const char *buf, const size_t buflen,
+ const char *delim, struct sockaddr_in6 *sin6)
+{
+ char *p;
+ size_t len;
+
+ if ((buf + buflen) == delim)
+ return 1;
+
+ if (*delim != IPV6_SCOPE_DELIMITER)
+ return 0;
+
+ if (!(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_SITELOCAL))
+ return 0;
+
+ len = (buf + buflen) - delim - 1;
+ p = kstrndup(delim + 1, len, GFP_KERNEL);
+ if (p) {
+ unsigned long scope_id = 0;
+ struct net_device *dev;
+
+ dev = dev_get_by_name(&init_net, p);
+ if (dev != NULL) {
+ scope_id = dev->ifindex;
+ dev_put(dev);
+ } else {
+ if (strict_strtoul(p, 10, &scope_id) == 0) {
+ kfree(p);
+ return 0;
+ }
+ }
+
+ kfree(p);
+
+ sin6->sin6_scope_id = scope_id;
+ return 1;
+ }
+
+ return 0;
+}
+
+static size_t rpc_pton6(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+ u8 *addr = (u8 *)&sin6->sin6_addr.in6_u;
+ const char *delim;
+
+ if (buflen > (INET6_ADDRSTRLEN + IPV6_SCOPE_ID_LEN) ||
+ salen < sizeof(struct sockaddr_in6))
+ return 0;
+
+ memset(sap, 0, sizeof(struct sockaddr_in6));
+
+ if (in6_pton(buf, buflen, addr, IPV6_SCOPE_DELIMITER, &delim) == 0)
+ return 0;
+
+ if (!rpc_parse_scope_id(buf, buflen, delim, sin6))
+ return 0;
+
+ sin6->sin6_family = AF_INET6;
+ return sizeof(struct sockaddr_in6);
+}
+#else
+static size_t rpc_pton6(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ return 0;
+}
+#endif
+
+/**
+ * rpc_pton - Construct a sockaddr in @sap
+ * @buf: C string containing presentation format IP address
+ * @buflen: length of presentation address in bytes
+ * @sap: buffer into which to plant socket address
+ * @salen: size of buffer in bytes
+ *
+ * Returns the size of the socket address if successful; otherwise
+ * zero is returned.
+ *
+ * Plants a socket address in @sap and returns the size of the
+ * socket address, if successful. Returns zero if an error
+ * occurred.
+ */
+size_t rpc_pton(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ unsigned int i;
+
+ for (i = 0; i < buflen; i++)
+ if (buf[i] == ':')
+ return rpc_pton6(buf, buflen, sap, salen);
+ return rpc_pton4(buf, buflen, sap, salen);
+}
+EXPORT_SYMBOL_GPL(rpc_pton);
+
+/**
+ * rpc_sockaddr2uaddr - Construct a universal address string from @sap.
+ * @sap: socket address
+ *
+ * Returns a %NUL-terminated string in dynamically allocated memory;
+ * otherwise NULL is returned if an error occurred. Caller must
+ * free the returned string.
+ */
+char *rpc_sockaddr2uaddr(const struct sockaddr *sap)
+{
+ char portbuf[RPCBIND_MAXUADDRPLEN];
+ char addrbuf[RPCBIND_MAXUADDRLEN];
+ unsigned short port;
+
+ switch (sap->sa_family) {
+ case AF_INET:
+ if (rpc_ntop4(sap, addrbuf, sizeof(addrbuf)) == 0)
+ return NULL;
+ port = ntohs(((struct sockaddr_in *)sap)->sin_port);
+ break;
+ case AF_INET6:
+ if (rpc_ntop6_noscopeid(sap, addrbuf, sizeof(addrbuf)) == 0)
+ return NULL;
+ port = ntohs(((struct sockaddr_in6 *)sap)->sin6_port);
+ break;
+ default:
+ return NULL;
+ }
+
+ if (snprintf(portbuf, sizeof(portbuf),
+ ".%u.%u", port >> 8, port & 0xff) > (int)sizeof(portbuf))
+ return NULL;
+
+ if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) > sizeof(addrbuf))
+ return NULL;
+
+ return kstrdup(addrbuf, GFP_KERNEL);
+}
+EXPORT_SYMBOL_GPL(rpc_sockaddr2uaddr);
+
+/**
+ * rpc_uaddr2sockaddr - convert a universal address to a socket address.
+ * @uaddr: C string containing universal address to convert
+ * @uaddr_len: length of universal address string
+ * @sap: buffer into which to plant socket address
+ * @salen: size of buffer
+ *
+ * Returns the size of the socket address if successful; otherwise
+ * zero is returned.
+ */
+size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len,
+ struct sockaddr *sap, const size_t salen)
+{
+ char *c, buf[RPCBIND_MAXUADDRLEN];
+ unsigned long portlo, porthi;
+ unsigned short port;
+
+ if (uaddr_len > sizeof(buf))
+ return 0;
+
+ memcpy(buf, uaddr, uaddr_len);
+
+ buf[uaddr_len] = '\n';
+ buf[uaddr_len + 1] = '\0';
+
+ c = strrchr(buf, '.');
+ if (unlikely(c == NULL))
+ return 0;
+ if (unlikely(strict_strtoul(c + 1, 10, &portlo) != 0))
+ return 0;
+ if (unlikely(portlo > 255))
+ return 0;
+
+ c[0] = '\n';
+ c[1] = '\0';
+
+ c = strrchr(buf, '.');
+ if (unlikely(c == NULL))
+ return 0;
+ if (unlikely(strict_strtoul(c + 1, 10, &porthi) != 0))
+ return 0;
+ if (unlikely(porthi > 255))
+ return 0;
+
+ port = (unsigned short)((porthi << 8) | portlo);
+
+ c[0] = '\0';
+
+ if (rpc_pton(buf, strlen(buf), sap, salen) == 0)
+ return 0;
+
+ switch (sap->sa_family) {
+ case AF_INET:
+ ((struct sockaddr_in *)sap)->sin_port = htons(port);
+ return sizeof(struct sockaddr_in);
+ case AF_INET6:
+ ((struct sockaddr_in6 *)sap)->sin6_port = htons(port);
+ return sizeof(struct sockaddr_in6);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rpc_uaddr2sockaddr);
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 66d458f..fc6a43c 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -89,8 +89,8 @@
static DECLARE_WAIT_QUEUE_HEAD(pipe_version_waitqueue);
static void gss_free_ctx(struct gss_cl_ctx *);
-static struct rpc_pipe_ops gss_upcall_ops_v0;
-static struct rpc_pipe_ops gss_upcall_ops_v1;
+static const struct rpc_pipe_ops gss_upcall_ops_v0;
+static const struct rpc_pipe_ops gss_upcall_ops_v1;
static inline struct gss_cl_ctx *
gss_get_ctx(struct gss_cl_ctx *ctx)
@@ -777,7 +777,7 @@
* that we supported only the old pipe. So we instead create
* the new pipe first.
*/
- gss_auth->dentry[1] = rpc_mkpipe(clnt->cl_dentry,
+ gss_auth->dentry[1] = rpc_mkpipe(clnt->cl_path.dentry,
"gssd",
clnt, &gss_upcall_ops_v1,
RPC_PIPE_WAIT_FOR_OPEN);
@@ -786,7 +786,7 @@
goto err_put_mech;
}
- gss_auth->dentry[0] = rpc_mkpipe(clnt->cl_dentry,
+ gss_auth->dentry[0] = rpc_mkpipe(clnt->cl_path.dentry,
gss_auth->mech->gm_name,
clnt, &gss_upcall_ops_v0,
RPC_PIPE_WAIT_FOR_OPEN);
@@ -1507,7 +1507,7 @@
.crunwrap_resp = gss_unwrap_resp,
};
-static struct rpc_pipe_ops gss_upcall_ops_v0 = {
+static const struct rpc_pipe_ops gss_upcall_ops_v0 = {
.upcall = gss_pipe_upcall,
.downcall = gss_pipe_downcall,
.destroy_msg = gss_pipe_destroy_msg,
@@ -1515,7 +1515,7 @@
.release_pipe = gss_pipe_release,
};
-static struct rpc_pipe_ops gss_upcall_ops_v1 = {
+static const struct rpc_pipe_ops gss_upcall_ops_v1 = {
.upcall = gss_pipe_upcall,
.downcall = gss_pipe_downcall,
.destroy_msg = gss_pipe_destroy_msg,
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 2278a50..2e6a148 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -181,6 +181,11 @@
(*bpp)[-1] = '\n';
}
+static int rsi_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, rsi_request);
+}
+
static int rsi_parse(struct cache_detail *cd,
char *mesg, int mlen)
@@ -270,7 +275,7 @@
.hash_table = rsi_table,
.name = "auth.rpcsec.init",
.cache_put = rsi_put,
- .cache_request = rsi_request,
+ .cache_upcall = rsi_upcall,
.cache_parse = rsi_parse,
.match = rsi_match,
.init = rsi_init,
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index ff0c230..45cdaff 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -27,10 +27,12 @@
#include <linux/net.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/pagemap.h>
#include <asm/ioctls.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/cache.h>
#include <linux/sunrpc/stats.h>
+#include <linux/sunrpc/rpc_pipe_fs.h>
#define RPCDBG_FACILITY RPCDBG_CACHE
@@ -175,7 +177,13 @@
}
EXPORT_SYMBOL_GPL(sunrpc_cache_update);
-static int cache_make_upcall(struct cache_detail *detail, struct cache_head *h);
+static int cache_make_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ if (!cd->cache_upcall)
+ return -EINVAL;
+ return cd->cache_upcall(cd, h);
+}
+
/*
* This is the generic cache management routine for all
* the authentication caches.
@@ -284,76 +292,11 @@
static struct cache_detail *current_detail;
static int current_index;
-static const struct file_operations cache_file_operations;
-static const struct file_operations content_file_operations;
-static const struct file_operations cache_flush_operations;
-
static void do_cache_clean(struct work_struct *work);
static DECLARE_DELAYED_WORK(cache_cleaner, do_cache_clean);
-static void remove_cache_proc_entries(struct cache_detail *cd)
+static void sunrpc_init_cache_detail(struct cache_detail *cd)
{
- if (cd->proc_ent == NULL)
- return;
- if (cd->flush_ent)
- remove_proc_entry("flush", cd->proc_ent);
- if (cd->channel_ent)
- remove_proc_entry("channel", cd->proc_ent);
- if (cd->content_ent)
- remove_proc_entry("content", cd->proc_ent);
- cd->proc_ent = NULL;
- remove_proc_entry(cd->name, proc_net_rpc);
-}
-
-#ifdef CONFIG_PROC_FS
-static int create_cache_proc_entries(struct cache_detail *cd)
-{
- struct proc_dir_entry *p;
-
- cd->proc_ent = proc_mkdir(cd->name, proc_net_rpc);
- if (cd->proc_ent == NULL)
- goto out_nomem;
- cd->channel_ent = cd->content_ent = NULL;
-
- p = proc_create_data("flush", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent, &cache_flush_operations, cd);
- cd->flush_ent = p;
- if (p == NULL)
- goto out_nomem;
-
- if (cd->cache_request || cd->cache_parse) {
- p = proc_create_data("channel", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent, &cache_file_operations, cd);
- cd->channel_ent = p;
- if (p == NULL)
- goto out_nomem;
- }
- if (cd->cache_show) {
- p = proc_create_data("content", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent, &content_file_operations, cd);
- cd->content_ent = p;
- if (p == NULL)
- goto out_nomem;
- }
- return 0;
-out_nomem:
- remove_cache_proc_entries(cd);
- return -ENOMEM;
-}
-#else /* CONFIG_PROC_FS */
-static int create_cache_proc_entries(struct cache_detail *cd)
-{
- return 0;
-}
-#endif
-
-int cache_register(struct cache_detail *cd)
-{
- int ret;
-
- ret = create_cache_proc_entries(cd);
- if (ret)
- return ret;
rwlock_init(&cd->hash_lock);
INIT_LIST_HEAD(&cd->queue);
spin_lock(&cache_list_lock);
@@ -367,11 +310,9 @@
/* start the cleaning process */
schedule_delayed_work(&cache_cleaner, 0);
- return 0;
}
-EXPORT_SYMBOL_GPL(cache_register);
-void cache_unregister(struct cache_detail *cd)
+static void sunrpc_destroy_cache_detail(struct cache_detail *cd)
{
cache_purge(cd);
spin_lock(&cache_list_lock);
@@ -386,7 +327,6 @@
list_del_init(&cd->others);
write_unlock(&cd->hash_lock);
spin_unlock(&cache_list_lock);
- remove_cache_proc_entries(cd);
if (list_empty(&cache_list)) {
/* module must be being unloaded so its safe to kill the worker */
cancel_delayed_work_sync(&cache_cleaner);
@@ -395,7 +335,6 @@
out:
printk(KERN_ERR "nfsd: failed to unregister %s cache\n", cd->name);
}
-EXPORT_SYMBOL_GPL(cache_unregister);
/* clean cache tries to find something to clean
* and cleans it.
@@ -687,18 +626,18 @@
int offset; /* if non-0, we have a refcnt on next request */
};
-static ssize_t
-cache_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
+static ssize_t cache_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *ppos, struct cache_detail *cd)
{
struct cache_reader *rp = filp->private_data;
struct cache_request *rq;
- struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int err;
if (count == 0)
return 0;
- mutex_lock(&queue_io_mutex); /* protect against multiple concurrent
+ mutex_lock(&inode->i_mutex); /* protect against multiple concurrent
* readers on this file */
again:
spin_lock(&queue_lock);
@@ -711,7 +650,7 @@
}
if (rp->q.list.next == &cd->queue) {
spin_unlock(&queue_lock);
- mutex_unlock(&queue_io_mutex);
+ mutex_unlock(&inode->i_mutex);
BUG_ON(rp->offset);
return 0;
}
@@ -758,49 +697,90 @@
}
if (err == -EAGAIN)
goto again;
- mutex_unlock(&queue_io_mutex);
+ mutex_unlock(&inode->i_mutex);
return err ? err : count;
}
-static char write_buf[8192]; /* protected by queue_io_mutex */
-
-static ssize_t
-cache_write(struct file *filp, const char __user *buf, size_t count,
- loff_t *ppos)
+static ssize_t cache_do_downcall(char *kaddr, const char __user *buf,
+ size_t count, struct cache_detail *cd)
{
- int err;
- struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+ ssize_t ret;
- if (count == 0)
- return 0;
- if (count >= sizeof(write_buf))
- return -EINVAL;
-
- mutex_lock(&queue_io_mutex);
-
- if (copy_from_user(write_buf, buf, count)) {
- mutex_unlock(&queue_io_mutex);
+ if (copy_from_user(kaddr, buf, count))
return -EFAULT;
- }
- write_buf[count] = '\0';
- if (cd->cache_parse)
- err = cd->cache_parse(cd, write_buf, count);
- else
- err = -EINVAL;
+ kaddr[count] = '\0';
+ ret = cd->cache_parse(cd, kaddr, count);
+ if (!ret)
+ ret = count;
+ return ret;
+}
+static ssize_t cache_slow_downcall(const char __user *buf,
+ size_t count, struct cache_detail *cd)
+{
+ static char write_buf[8192]; /* protected by queue_io_mutex */
+ ssize_t ret = -EINVAL;
+
+ if (count >= sizeof(write_buf))
+ goto out;
+ mutex_lock(&queue_io_mutex);
+ ret = cache_do_downcall(write_buf, buf, count, cd);
mutex_unlock(&queue_io_mutex);
- return err ? err : count;
+out:
+ return ret;
+}
+
+static ssize_t cache_downcall(struct address_space *mapping,
+ const char __user *buf,
+ size_t count, struct cache_detail *cd)
+{
+ struct page *page;
+ char *kaddr;
+ ssize_t ret = -ENOMEM;
+
+ if (count >= PAGE_CACHE_SIZE)
+ goto out_slow;
+
+ page = find_or_create_page(mapping, 0, GFP_KERNEL);
+ if (!page)
+ goto out_slow;
+
+ kaddr = kmap(page);
+ ret = cache_do_downcall(kaddr, buf, count, cd);
+ kunmap(page);
+ unlock_page(page);
+ page_cache_release(page);
+ return ret;
+out_slow:
+ return cache_slow_downcall(buf, count, cd);
+}
+
+static ssize_t cache_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos,
+ struct cache_detail *cd)
+{
+ struct address_space *mapping = filp->f_mapping;
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ ssize_t ret = -EINVAL;
+
+ if (!cd->cache_parse)
+ goto out;
+
+ mutex_lock(&inode->i_mutex);
+ ret = cache_downcall(mapping, buf, count, cd);
+ mutex_unlock(&inode->i_mutex);
+out:
+ return ret;
}
static DECLARE_WAIT_QUEUE_HEAD(queue_wait);
-static unsigned int
-cache_poll(struct file *filp, poll_table *wait)
+static unsigned int cache_poll(struct file *filp, poll_table *wait,
+ struct cache_detail *cd)
{
unsigned int mask;
struct cache_reader *rp = filp->private_data;
struct cache_queue *cq;
- struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
poll_wait(filp, &queue_wait, wait);
@@ -822,14 +802,13 @@
return mask;
}
-static int
-cache_ioctl(struct inode *ino, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static int cache_ioctl(struct inode *ino, struct file *filp,
+ unsigned int cmd, unsigned long arg,
+ struct cache_detail *cd)
{
int len = 0;
struct cache_reader *rp = filp->private_data;
struct cache_queue *cq;
- struct cache_detail *cd = PDE(ino)->data;
if (cmd != FIONREAD || !rp)
return -EINVAL;
@@ -852,15 +831,15 @@
return put_user(len, (int __user *)arg);
}
-static int
-cache_open(struct inode *inode, struct file *filp)
+static int cache_open(struct inode *inode, struct file *filp,
+ struct cache_detail *cd)
{
struct cache_reader *rp = NULL;
+ if (!cd || !try_module_get(cd->owner))
+ return -EACCES;
nonseekable_open(inode, filp);
if (filp->f_mode & FMODE_READ) {
- struct cache_detail *cd = PDE(inode)->data;
-
rp = kmalloc(sizeof(*rp), GFP_KERNEL);
if (!rp)
return -ENOMEM;
@@ -875,11 +854,10 @@
return 0;
}
-static int
-cache_release(struct inode *inode, struct file *filp)
+static int cache_release(struct inode *inode, struct file *filp,
+ struct cache_detail *cd)
{
struct cache_reader *rp = filp->private_data;
- struct cache_detail *cd = PDE(inode)->data;
if (rp) {
spin_lock(&queue_lock);
@@ -903,23 +881,12 @@
cd->last_close = get_seconds();
atomic_dec(&cd->readers);
}
+ module_put(cd->owner);
return 0;
}
-static const struct file_operations cache_file_operations = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = cache_read,
- .write = cache_write,
- .poll = cache_poll,
- .ioctl = cache_ioctl, /* for FIONREAD */
- .open = cache_open,
- .release = cache_release,
-};
-
-
static void queue_loose(struct cache_detail *detail, struct cache_head *ch)
{
struct cache_queue *cq;
@@ -1020,15 +987,21 @@
if (detail->last_warn != detail->last_close) {
detail->last_warn = detail->last_close;
if (detail->warn_no_listener)
- detail->warn_no_listener(detail);
+ detail->warn_no_listener(detail, detail->last_close != 0);
}
}
/*
- * register an upcall request to user-space.
+ * register an upcall request to user-space and queue it up for read() by the
+ * upcall daemon.
+ *
* Each request is at most one page long.
*/
-static int cache_make_upcall(struct cache_detail *detail, struct cache_head *h)
+int sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h,
+ void (*cache_request)(struct cache_detail *,
+ struct cache_head *,
+ char **,
+ int *))
{
char *buf;
@@ -1036,9 +1009,6 @@
char *bp;
int len;
- if (detail->cache_request == NULL)
- return -EINVAL;
-
if (atomic_read(&detail->readers) == 0 &&
detail->last_close < get_seconds() - 30) {
warn_no_listener(detail);
@@ -1057,7 +1027,7 @@
bp = buf; len = PAGE_SIZE;
- detail->cache_request(detail, h, &bp, &len);
+ cache_request(detail, h, &bp, &len);
if (len < 0) {
kfree(buf);
@@ -1075,6 +1045,7 @@
wake_up(&queue_wait);
return 0;
}
+EXPORT_SYMBOL_GPL(sunrpc_cache_pipe_upcall);
/*
* parse a message from user-space and pass it
@@ -1242,11 +1213,13 @@
.show = c_show,
};
-static int content_open(struct inode *inode, struct file *file)
+static int content_open(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
{
struct handle *han;
- struct cache_detail *cd = PDE(inode)->data;
+ if (!cd || !try_module_get(cd->owner))
+ return -EACCES;
han = __seq_open_private(file, &cache_content_op, sizeof(*han));
if (han == NULL)
return -ENOMEM;
@@ -1255,17 +1228,33 @@
return 0;
}
-static const struct file_operations content_file_operations = {
- .open = content_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release_private,
-};
+static int content_release(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
+{
+ int ret = seq_release_private(inode, file);
+ module_put(cd->owner);
+ return ret;
+}
+
+static int open_flush(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
+{
+ if (!cd || !try_module_get(cd->owner))
+ return -EACCES;
+ return nonseekable_open(inode, file);
+}
+
+static int release_flush(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
+{
+ module_put(cd->owner);
+ return 0;
+}
static ssize_t read_flush(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos,
+ struct cache_detail *cd)
{
- struct cache_detail *cd = PDE(file->f_path.dentry->d_inode)->data;
char tbuf[20];
unsigned long p = *ppos;
size_t len;
@@ -1283,10 +1272,10 @@
return len;
}
-static ssize_t write_flush(struct file * file, const char __user * buf,
- size_t count, loff_t *ppos)
+static ssize_t write_flush(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos,
+ struct cache_detail *cd)
{
- struct cache_detail *cd = PDE(file->f_path.dentry->d_inode)->data;
char tbuf[20];
char *ep;
long flushtime;
@@ -1307,8 +1296,343 @@
return count;
}
-static const struct file_operations cache_flush_operations = {
- .open = nonseekable_open,
- .read = read_flush,
- .write = write_flush,
+static ssize_t cache_read_procfs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return cache_read(filp, buf, count, ppos, cd);
+}
+
+static ssize_t cache_write_procfs(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return cache_write(filp, buf, count, ppos, cd);
+}
+
+static unsigned int cache_poll_procfs(struct file *filp, poll_table *wait)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return cache_poll(filp, wait, cd);
+}
+
+static int cache_ioctl_procfs(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return cache_ioctl(inode, filp, cmd, arg, cd);
+}
+
+static int cache_open_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return cache_open(inode, filp, cd);
+}
+
+static int cache_release_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return cache_release(inode, filp, cd);
+}
+
+static const struct file_operations cache_file_operations_procfs = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = cache_read_procfs,
+ .write = cache_write_procfs,
+ .poll = cache_poll_procfs,
+ .ioctl = cache_ioctl_procfs, /* for FIONREAD */
+ .open = cache_open_procfs,
+ .release = cache_release_procfs,
};
+
+static int content_open_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return content_open(inode, filp, cd);
+}
+
+static int content_release_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return content_release(inode, filp, cd);
+}
+
+static const struct file_operations content_file_operations_procfs = {
+ .open = content_open_procfs,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = content_release_procfs,
+};
+
+static int open_flush_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return open_flush(inode, filp, cd);
+}
+
+static int release_flush_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return release_flush(inode, filp, cd);
+}
+
+static ssize_t read_flush_procfs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return read_flush(filp, buf, count, ppos, cd);
+}
+
+static ssize_t write_flush_procfs(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return write_flush(filp, buf, count, ppos, cd);
+}
+
+static const struct file_operations cache_flush_operations_procfs = {
+ .open = open_flush_procfs,
+ .read = read_flush_procfs,
+ .write = write_flush_procfs,
+ .release = release_flush_procfs,
+};
+
+static void remove_cache_proc_entries(struct cache_detail *cd)
+{
+ if (cd->u.procfs.proc_ent == NULL)
+ return;
+ if (cd->u.procfs.flush_ent)
+ remove_proc_entry("flush", cd->u.procfs.proc_ent);
+ if (cd->u.procfs.channel_ent)
+ remove_proc_entry("channel", cd->u.procfs.proc_ent);
+ if (cd->u.procfs.content_ent)
+ remove_proc_entry("content", cd->u.procfs.proc_ent);
+ cd->u.procfs.proc_ent = NULL;
+ remove_proc_entry(cd->name, proc_net_rpc);
+}
+
+#ifdef CONFIG_PROC_FS
+static int create_cache_proc_entries(struct cache_detail *cd)
+{
+ struct proc_dir_entry *p;
+
+ cd->u.procfs.proc_ent = proc_mkdir(cd->name, proc_net_rpc);
+ if (cd->u.procfs.proc_ent == NULL)
+ goto out_nomem;
+ cd->u.procfs.channel_ent = NULL;
+ cd->u.procfs.content_ent = NULL;
+
+ p = proc_create_data("flush", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->u.procfs.proc_ent,
+ &cache_flush_operations_procfs, cd);
+ cd->u.procfs.flush_ent = p;
+ if (p == NULL)
+ goto out_nomem;
+
+ if (cd->cache_upcall || cd->cache_parse) {
+ p = proc_create_data("channel", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->u.procfs.proc_ent,
+ &cache_file_operations_procfs, cd);
+ cd->u.procfs.channel_ent = p;
+ if (p == NULL)
+ goto out_nomem;
+ }
+ if (cd->cache_show) {
+ p = proc_create_data("content", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->u.procfs.proc_ent,
+ &content_file_operations_procfs, cd);
+ cd->u.procfs.content_ent = p;
+ if (p == NULL)
+ goto out_nomem;
+ }
+ return 0;
+out_nomem:
+ remove_cache_proc_entries(cd);
+ return -ENOMEM;
+}
+#else /* CONFIG_PROC_FS */
+static int create_cache_proc_entries(struct cache_detail *cd)
+{
+ return 0;
+}
+#endif
+
+int cache_register(struct cache_detail *cd)
+{
+ int ret;
+
+ sunrpc_init_cache_detail(cd);
+ ret = create_cache_proc_entries(cd);
+ if (ret)
+ sunrpc_destroy_cache_detail(cd);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cache_register);
+
+void cache_unregister(struct cache_detail *cd)
+{
+ remove_cache_proc_entries(cd);
+ sunrpc_destroy_cache_detail(cd);
+}
+EXPORT_SYMBOL_GPL(cache_unregister);
+
+static ssize_t cache_read_pipefs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return cache_read(filp, buf, count, ppos, cd);
+}
+
+static ssize_t cache_write_pipefs(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return cache_write(filp, buf, count, ppos, cd);
+}
+
+static unsigned int cache_poll_pipefs(struct file *filp, poll_table *wait)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return cache_poll(filp, wait, cd);
+}
+
+static int cache_ioctl_pipefs(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return cache_ioctl(inode, filp, cmd, arg, cd);
+}
+
+static int cache_open_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return cache_open(inode, filp, cd);
+}
+
+static int cache_release_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return cache_release(inode, filp, cd);
+}
+
+const struct file_operations cache_file_operations_pipefs = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = cache_read_pipefs,
+ .write = cache_write_pipefs,
+ .poll = cache_poll_pipefs,
+ .ioctl = cache_ioctl_pipefs, /* for FIONREAD */
+ .open = cache_open_pipefs,
+ .release = cache_release_pipefs,
+};
+
+static int content_open_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return content_open(inode, filp, cd);
+}
+
+static int content_release_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return content_release(inode, filp, cd);
+}
+
+const struct file_operations content_file_operations_pipefs = {
+ .open = content_open_pipefs,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = content_release_pipefs,
+};
+
+static int open_flush_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return open_flush(inode, filp, cd);
+}
+
+static int release_flush_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return release_flush(inode, filp, cd);
+}
+
+static ssize_t read_flush_pipefs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return read_flush(filp, buf, count, ppos, cd);
+}
+
+static ssize_t write_flush_pipefs(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return write_flush(filp, buf, count, ppos, cd);
+}
+
+const struct file_operations cache_flush_operations_pipefs = {
+ .open = open_flush_pipefs,
+ .read = read_flush_pipefs,
+ .write = write_flush_pipefs,
+ .release = release_flush_pipefs,
+};
+
+int sunrpc_cache_register_pipefs(struct dentry *parent,
+ const char *name, mode_t umode,
+ struct cache_detail *cd)
+{
+ struct qstr q;
+ struct dentry *dir;
+ int ret = 0;
+
+ sunrpc_init_cache_detail(cd);
+ q.name = name;
+ q.len = strlen(name);
+ q.hash = full_name_hash(q.name, q.len);
+ dir = rpc_create_cache_dir(parent, &q, umode, cd);
+ if (!IS_ERR(dir))
+ cd->u.pipefs.dir = dir;
+ else {
+ sunrpc_destroy_cache_detail(cd);
+ ret = PTR_ERR(dir);
+ }
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sunrpc_cache_register_pipefs);
+
+void sunrpc_cache_unregister_pipefs(struct cache_detail *cd)
+{
+ rpc_remove_cache_dir(cd->u.pipefs.dir);
+ cd->u.pipefs.dir = NULL;
+ sunrpc_destroy_cache_detail(cd);
+}
+EXPORT_SYMBOL_GPL(sunrpc_cache_unregister_pipefs);
+
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index ebfcf9b..fac0ca9 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -27,6 +27,8 @@
#include <linux/types.h>
#include <linux/kallsyms.h>
#include <linux/mm.h>
+#include <linux/namei.h>
+#include <linux/mount.h>
#include <linux/slab.h>
#include <linux/utsname.h>
#include <linux/workqueue.h>
@@ -97,33 +99,49 @@
rpc_setup_pipedir(struct rpc_clnt *clnt, char *dir_name)
{
static uint32_t clntid;
+ struct nameidata nd;
+ struct path path;
+ char name[15];
+ struct qstr q = {
+ .name = name,
+ };
int error;
- clnt->cl_vfsmnt = ERR_PTR(-ENOENT);
- clnt->cl_dentry = ERR_PTR(-ENOENT);
+ clnt->cl_path.mnt = ERR_PTR(-ENOENT);
+ clnt->cl_path.dentry = ERR_PTR(-ENOENT);
if (dir_name == NULL)
return 0;
- clnt->cl_vfsmnt = rpc_get_mount();
- if (IS_ERR(clnt->cl_vfsmnt))
- return PTR_ERR(clnt->cl_vfsmnt);
+ path.mnt = rpc_get_mount();
+ if (IS_ERR(path.mnt))
+ return PTR_ERR(path.mnt);
+ error = vfs_path_lookup(path.mnt->mnt_root, path.mnt, dir_name, 0, &nd);
+ if (error)
+ goto err;
for (;;) {
- snprintf(clnt->cl_pathname, sizeof(clnt->cl_pathname),
- "%s/clnt%x", dir_name,
- (unsigned int)clntid++);
- clnt->cl_pathname[sizeof(clnt->cl_pathname) - 1] = '\0';
- clnt->cl_dentry = rpc_mkdir(clnt->cl_pathname, clnt);
- if (!IS_ERR(clnt->cl_dentry))
- return 0;
- error = PTR_ERR(clnt->cl_dentry);
+ q.len = snprintf(name, sizeof(name), "clnt%x", (unsigned int)clntid++);
+ name[sizeof(name) - 1] = '\0';
+ q.hash = full_name_hash(q.name, q.len);
+ path.dentry = rpc_create_client_dir(nd.path.dentry, &q, clnt);
+ if (!IS_ERR(path.dentry))
+ break;
+ error = PTR_ERR(path.dentry);
if (error != -EEXIST) {
- printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n",
- clnt->cl_pathname, error);
- rpc_put_mount();
- return error;
+ printk(KERN_INFO "RPC: Couldn't create pipefs entry"
+ " %s/%s, error %d\n",
+ dir_name, name, error);
+ goto err_path_put;
}
}
+ path_put(&nd.path);
+ clnt->cl_path = path;
+ return 0;
+err_path_put:
+ path_put(&nd.path);
+err:
+ rpc_put_mount();
+ return error;
}
static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, struct rpc_xprt *xprt)
@@ -231,8 +249,8 @@
return clnt;
out_no_auth:
- if (!IS_ERR(clnt->cl_dentry)) {
- rpc_rmdir(clnt->cl_dentry);
+ if (!IS_ERR(clnt->cl_path.dentry)) {
+ rpc_remove_client_dir(clnt->cl_path.dentry);
rpc_put_mount();
}
out_no_path:
@@ -423,8 +441,8 @@
dprintk("RPC: destroying %s client for %s\n",
clnt->cl_protname, clnt->cl_server);
- if (!IS_ERR(clnt->cl_dentry)) {
- rpc_rmdir(clnt->cl_dentry);
+ if (!IS_ERR(clnt->cl_path.dentry)) {
+ rpc_remove_client_dir(clnt->cl_path.dentry);
rpc_put_mount();
}
if (clnt->cl_parent != clnt) {
@@ -937,6 +955,7 @@
rpc_task_force_reencode(struct rpc_task *task)
{
task->tk_rqstp->rq_snd_buf.len = 0;
+ task->tk_rqstp->rq_bytes_sent = 0;
}
static inline void
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 9ced062..7f676bd 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -26,6 +26,7 @@
#include <linux/sunrpc/clnt.h>
#include <linux/workqueue.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
+#include <linux/sunrpc/cache.h>
static struct vfsmount *rpc_mount __read_mostly;
static int rpc_mount_count;
@@ -125,7 +126,7 @@
rpc_close_pipes(struct inode *inode)
{
struct rpc_inode *rpci = RPC_I(inode);
- struct rpc_pipe_ops *ops;
+ const struct rpc_pipe_ops *ops;
int need_release;
mutex_lock(&inode->i_mutex);
@@ -398,66 +399,12 @@
/*
- * We have a single directory with 1 node in it.
- */
-enum {
- RPCAUTH_Root = 1,
- RPCAUTH_lockd,
- RPCAUTH_mount,
- RPCAUTH_nfs,
- RPCAUTH_portmap,
- RPCAUTH_statd,
- RPCAUTH_nfsd4_cb,
- RPCAUTH_RootEOF
-};
-
-/*
* Description of fs contents.
*/
struct rpc_filelist {
- char *name;
+ const char *name;
const struct file_operations *i_fop;
- int mode;
-};
-
-static struct rpc_filelist files[] = {
- [RPCAUTH_lockd] = {
- .name = "lockd",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_mount] = {
- .name = "mount",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_nfs] = {
- .name = "nfs",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_portmap] = {
- .name = "portmap",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_statd] = {
- .name = "statd",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_nfsd4_cb] = {
- .name = "nfsd4_cb",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
-};
-
-enum {
- RPCAUTH_info = 2,
- RPCAUTH_EOF
-};
-
-static struct rpc_filelist authfiles[] = {
- [RPCAUTH_info] = {
- .name = "info",
- .i_fop = &rpc_info_operations,
- .mode = S_IFREG | S_IRUSR,
- },
+ umode_t mode;
};
struct vfsmount *rpc_get_mount(void)
@@ -469,11 +416,13 @@
return ERR_PTR(err);
return rpc_mount;
}
+EXPORT_SYMBOL_GPL(rpc_get_mount);
void rpc_put_mount(void)
{
simple_release_fs(&rpc_mount, &rpc_mount_count);
}
+EXPORT_SYMBOL_GPL(rpc_put_mount);
static int rpc_delete_dentry(struct dentry *dentry)
{
@@ -484,39 +433,8 @@
.d_delete = rpc_delete_dentry,
};
-static int
-rpc_lookup_parent(char *path, struct nameidata *nd)
-{
- struct vfsmount *mnt;
-
- if (path[0] == '\0')
- return -ENOENT;
-
- mnt = rpc_get_mount();
- if (IS_ERR(mnt)) {
- printk(KERN_WARNING "%s: %s failed to mount "
- "pseudofilesystem \n", __FILE__, __func__);
- return PTR_ERR(mnt);
- }
-
- if (vfs_path_lookup(mnt->mnt_root, mnt, path, LOOKUP_PARENT, nd)) {
- printk(KERN_WARNING "%s: %s failed to find path %s\n",
- __FILE__, __func__, path);
- rpc_put_mount();
- return -ENOENT;
- }
- return 0;
-}
-
-static void
-rpc_release_path(struct nameidata *nd)
-{
- path_put(&nd->path);
- rpc_put_mount();
-}
-
static struct inode *
-rpc_get_inode(struct super_block *sb, int mode)
+rpc_get_inode(struct super_block *sb, umode_t mode)
{
struct inode *inode = new_inode(sb);
if (!inode)
@@ -534,212 +452,274 @@
return inode;
}
-/*
- * FIXME: This probably has races.
- */
-static void rpc_depopulate(struct dentry *parent,
- unsigned long start, unsigned long eof)
-{
- struct inode *dir = parent->d_inode;
- struct list_head *pos, *next;
- struct dentry *dentry, *dvec[10];
- int n = 0;
-
- mutex_lock_nested(&dir->i_mutex, I_MUTEX_CHILD);
-repeat:
- spin_lock(&dcache_lock);
- list_for_each_safe(pos, next, &parent->d_subdirs) {
- dentry = list_entry(pos, struct dentry, d_u.d_child);
- if (!dentry->d_inode ||
- dentry->d_inode->i_ino < start ||
- dentry->d_inode->i_ino >= eof)
- continue;
- spin_lock(&dentry->d_lock);
- if (!d_unhashed(dentry)) {
- dget_locked(dentry);
- __d_drop(dentry);
- spin_unlock(&dentry->d_lock);
- dvec[n++] = dentry;
- if (n == ARRAY_SIZE(dvec))
- break;
- } else
- spin_unlock(&dentry->d_lock);
- }
- spin_unlock(&dcache_lock);
- if (n) {
- do {
- dentry = dvec[--n];
- if (S_ISREG(dentry->d_inode->i_mode))
- simple_unlink(dir, dentry);
- else if (S_ISDIR(dentry->d_inode->i_mode))
- simple_rmdir(dir, dentry);
- d_delete(dentry);
- dput(dentry);
- } while (n);
- goto repeat;
- }
- mutex_unlock(&dir->i_mutex);
-}
-
-static int
-rpc_populate(struct dentry *parent,
- struct rpc_filelist *files,
- int start, int eof)
-{
- struct inode *inode, *dir = parent->d_inode;
- void *private = RPC_I(dir)->private;
- struct dentry *dentry;
- int mode, i;
-
- mutex_lock(&dir->i_mutex);
- for (i = start; i < eof; i++) {
- dentry = d_alloc_name(parent, files[i].name);
- if (!dentry)
- goto out_bad;
- dentry->d_op = &rpc_dentry_operations;
- mode = files[i].mode;
- inode = rpc_get_inode(dir->i_sb, mode);
- if (!inode) {
- dput(dentry);
- goto out_bad;
- }
- inode->i_ino = i;
- if (files[i].i_fop)
- inode->i_fop = files[i].i_fop;
- if (private)
- rpc_inode_setowner(inode, private);
- if (S_ISDIR(mode))
- inc_nlink(dir);
- d_add(dentry, inode);
- fsnotify_create(dir, dentry);
- }
- mutex_unlock(&dir->i_mutex);
- return 0;
-out_bad:
- mutex_unlock(&dir->i_mutex);
- printk(KERN_WARNING "%s: %s failed to populate directory %s\n",
- __FILE__, __func__, parent->d_name.name);
- return -ENOMEM;
-}
-
-static int
-__rpc_mkdir(struct inode *dir, struct dentry *dentry)
+static int __rpc_create_common(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private)
{
struct inode *inode;
- inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUGO | S_IXUGO);
+ BUG_ON(!d_unhashed(dentry));
+ inode = rpc_get_inode(dir->i_sb, mode);
if (!inode)
goto out_err;
inode->i_ino = iunique(dir->i_sb, 100);
- d_instantiate(dentry, inode);
- inc_nlink(dir);
- fsnotify_mkdir(dir, dentry);
+ if (i_fop)
+ inode->i_fop = i_fop;
+ if (private)
+ rpc_inode_setowner(inode, private);
+ d_add(dentry, inode);
return 0;
out_err:
printk(KERN_WARNING "%s: %s failed to allocate inode for dentry %s\n",
__FILE__, __func__, dentry->d_name.name);
+ dput(dentry);
return -ENOMEM;
}
-static int
-__rpc_rmdir(struct inode *dir, struct dentry *dentry)
+static int __rpc_create(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private)
{
- int error;
- error = simple_rmdir(dir, dentry);
- if (!error)
- d_delete(dentry);
- return error;
+ int err;
+
+ err = __rpc_create_common(dir, dentry, S_IFREG | mode, i_fop, private);
+ if (err)
+ return err;
+ fsnotify_create(dir, dentry);
+ return 0;
}
-static struct dentry *
-rpc_lookup_create(struct dentry *parent, const char *name, int len, int exclusive)
+static int __rpc_mkdir(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private)
+{
+ int err;
+
+ err = __rpc_create_common(dir, dentry, S_IFDIR | mode, i_fop, private);
+ if (err)
+ return err;
+ inc_nlink(dir);
+ fsnotify_mkdir(dir, dentry);
+ return 0;
+}
+
+static int __rpc_mkpipe(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private,
+ const struct rpc_pipe_ops *ops,
+ int flags)
+{
+ struct rpc_inode *rpci;
+ int err;
+
+ err = __rpc_create_common(dir, dentry, S_IFIFO | mode, i_fop, private);
+ if (err)
+ return err;
+ rpci = RPC_I(dentry->d_inode);
+ rpci->nkern_readwriters = 1;
+ rpci->private = private;
+ rpci->flags = flags;
+ rpci->ops = ops;
+ fsnotify_create(dir, dentry);
+ return 0;
+}
+
+static int __rpc_rmdir(struct inode *dir, struct dentry *dentry)
+{
+ int ret;
+
+ dget(dentry);
+ ret = simple_rmdir(dir, dentry);
+ d_delete(dentry);
+ dput(dentry);
+ return ret;
+}
+
+static int __rpc_unlink(struct inode *dir, struct dentry *dentry)
+{
+ int ret;
+
+ dget(dentry);
+ ret = simple_unlink(dir, dentry);
+ d_delete(dentry);
+ dput(dentry);
+ return ret;
+}
+
+static int __rpc_rmpipe(struct inode *dir, struct dentry *dentry)
+{
+ struct inode *inode = dentry->d_inode;
+ struct rpc_inode *rpci = RPC_I(inode);
+
+ rpci->nkern_readwriters--;
+ if (rpci->nkern_readwriters != 0)
+ return 0;
+ rpc_close_pipes(inode);
+ return __rpc_unlink(dir, dentry);
+}
+
+static struct dentry *__rpc_lookup_create(struct dentry *parent,
+ struct qstr *name)
+{
+ struct dentry *dentry;
+
+ dentry = d_lookup(parent, name);
+ if (!dentry) {
+ dentry = d_alloc(parent, name);
+ if (!dentry) {
+ dentry = ERR_PTR(-ENOMEM);
+ goto out_err;
+ }
+ }
+ if (!dentry->d_inode)
+ dentry->d_op = &rpc_dentry_operations;
+out_err:
+ return dentry;
+}
+
+static struct dentry *__rpc_lookup_create_exclusive(struct dentry *parent,
+ struct qstr *name)
+{
+ struct dentry *dentry;
+
+ dentry = __rpc_lookup_create(parent, name);
+ if (dentry->d_inode == NULL)
+ return dentry;
+ dput(dentry);
+ return ERR_PTR(-EEXIST);
+}
+
+/*
+ * FIXME: This probably has races.
+ */
+static void __rpc_depopulate(struct dentry *parent,
+ const struct rpc_filelist *files,
+ int start, int eof)
{
struct inode *dir = parent->d_inode;
struct dentry *dentry;
+ struct qstr name;
+ int i;
+
+ for (i = start; i < eof; i++) {
+ name.name = files[i].name;
+ name.len = strlen(files[i].name);
+ name.hash = full_name_hash(name.name, name.len);
+ dentry = d_lookup(parent, &name);
+
+ if (dentry == NULL)
+ continue;
+ if (dentry->d_inode == NULL)
+ goto next;
+ switch (dentry->d_inode->i_mode & S_IFMT) {
+ default:
+ BUG();
+ case S_IFREG:
+ __rpc_unlink(dir, dentry);
+ break;
+ case S_IFDIR:
+ __rpc_rmdir(dir, dentry);
+ }
+next:
+ dput(dentry);
+ }
+}
+
+static void rpc_depopulate(struct dentry *parent,
+ const struct rpc_filelist *files,
+ int start, int eof)
+{
+ struct inode *dir = parent->d_inode;
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_CHILD);
+ __rpc_depopulate(parent, files, start, eof);
+ mutex_unlock(&dir->i_mutex);
+}
+
+static int rpc_populate(struct dentry *parent,
+ const struct rpc_filelist *files,
+ int start, int eof,
+ void *private)
+{
+ struct inode *dir = parent->d_inode;
+ struct dentry *dentry;
+ int i, err;
+
+ mutex_lock(&dir->i_mutex);
+ for (i = start; i < eof; i++) {
+ struct qstr q;
+
+ q.name = files[i].name;
+ q.len = strlen(files[i].name);
+ q.hash = full_name_hash(q.name, q.len);
+ dentry = __rpc_lookup_create_exclusive(parent, &q);
+ err = PTR_ERR(dentry);
+ if (IS_ERR(dentry))
+ goto out_bad;
+ switch (files[i].mode & S_IFMT) {
+ default:
+ BUG();
+ case S_IFREG:
+ err = __rpc_create(dir, dentry,
+ files[i].mode,
+ files[i].i_fop,
+ private);
+ break;
+ case S_IFDIR:
+ err = __rpc_mkdir(dir, dentry,
+ files[i].mode,
+ NULL,
+ private);
+ }
+ if (err != 0)
+ goto out_bad;
+ }
+ mutex_unlock(&dir->i_mutex);
+ return 0;
+out_bad:
+ __rpc_depopulate(parent, files, start, eof);
+ mutex_unlock(&dir->i_mutex);
+ printk(KERN_WARNING "%s: %s failed to populate directory %s\n",
+ __FILE__, __func__, parent->d_name.name);
+ return err;
+}
+
+static struct dentry *rpc_mkdir_populate(struct dentry *parent,
+ struct qstr *name, umode_t mode, void *private,
+ int (*populate)(struct dentry *, void *), void *args_populate)
+{
+ struct dentry *dentry;
+ struct inode *dir = parent->d_inode;
+ int error;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- dentry = lookup_one_len(name, parent, len);
+ dentry = __rpc_lookup_create_exclusive(parent, name);
if (IS_ERR(dentry))
+ goto out;
+ error = __rpc_mkdir(dir, dentry, mode, NULL, private);
+ if (error != 0)
goto out_err;
- if (!dentry->d_inode)
- dentry->d_op = &rpc_dentry_operations;
- else if (exclusive) {
- dput(dentry);
- dentry = ERR_PTR(-EEXIST);
- goto out_err;
+ if (populate != NULL) {
+ error = populate(dentry, args_populate);
+ if (error)
+ goto err_rmdir;
}
- return dentry;
-out_err:
- mutex_unlock(&dir->i_mutex);
- return dentry;
-}
-
-static struct dentry *
-rpc_lookup_negative(char *path, struct nameidata *nd)
-{
- struct dentry *dentry;
- int error;
-
- if ((error = rpc_lookup_parent(path, nd)) != 0)
- return ERR_PTR(error);
- dentry = rpc_lookup_create(nd->path.dentry, nd->last.name, nd->last.len,
- 1);
- if (IS_ERR(dentry))
- rpc_release_path(nd);
- return dentry;
-}
-
-/**
- * rpc_mkdir - Create a new directory in rpc_pipefs
- * @path: path from the rpc_pipefs root to the new directory
- * @rpc_client: rpc client to associate with this directory
- *
- * This creates a directory at the given @path associated with
- * @rpc_clnt, which will contain a file named "info" with some basic
- * information about the client, together with any "pipes" that may
- * later be created using rpc_mkpipe().
- */
-struct dentry *
-rpc_mkdir(char *path, struct rpc_clnt *rpc_client)
-{
- struct nameidata nd;
- struct dentry *dentry;
- struct inode *dir;
- int error;
-
- dentry = rpc_lookup_negative(path, &nd);
- if (IS_ERR(dentry))
- return dentry;
- dir = nd.path.dentry->d_inode;
- if ((error = __rpc_mkdir(dir, dentry)) != 0)
- goto err_dput;
- RPC_I(dentry->d_inode)->private = rpc_client;
- error = rpc_populate(dentry, authfiles,
- RPCAUTH_info, RPCAUTH_EOF);
- if (error)
- goto err_depopulate;
- dget(dentry);
out:
mutex_unlock(&dir->i_mutex);
- rpc_release_path(&nd);
return dentry;
-err_depopulate:
- rpc_depopulate(dentry, RPCAUTH_info, RPCAUTH_EOF);
+err_rmdir:
__rpc_rmdir(dir, dentry);
-err_dput:
- dput(dentry);
- printk(KERN_WARNING "%s: %s() failed to create directory %s (errno = %d)\n",
- __FILE__, __func__, path, error);
+out_err:
dentry = ERR_PTR(error);
goto out;
}
-/**
- * rpc_rmdir - Remove a directory created with rpc_mkdir()
- * @dentry: directory to remove
- */
-int
-rpc_rmdir(struct dentry *dentry)
+static int rpc_rmdir_depopulate(struct dentry *dentry,
+ void (*depopulate)(struct dentry *))
{
struct dentry *parent;
struct inode *dir;
@@ -748,9 +728,9 @@
parent = dget_parent(dentry);
dir = parent->d_inode;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- rpc_depopulate(dentry, RPCAUTH_info, RPCAUTH_EOF);
+ if (depopulate != NULL)
+ depopulate(dentry);
error = __rpc_rmdir(dir, dentry);
- dput(dentry);
mutex_unlock(&dir->i_mutex);
dput(parent);
return error;
@@ -776,50 +756,54 @@
* The @private argument passed here will be available to all these methods
* from the file pointer, via RPC_I(file->f_dentry->d_inode)->private.
*/
-struct dentry *
-rpc_mkpipe(struct dentry *parent, const char *name, void *private, struct rpc_pipe_ops *ops, int flags)
+struct dentry *rpc_mkpipe(struct dentry *parent, const char *name,
+ void *private, const struct rpc_pipe_ops *ops,
+ int flags)
{
struct dentry *dentry;
- struct inode *dir, *inode;
- struct rpc_inode *rpci;
+ struct inode *dir = parent->d_inode;
+ umode_t umode = S_IFIFO | S_IRUSR | S_IWUSR;
+ struct qstr q;
+ int err;
- dentry = rpc_lookup_create(parent, name, strlen(name), 0);
+ if (ops->upcall == NULL)
+ umode &= ~S_IRUGO;
+ if (ops->downcall == NULL)
+ umode &= ~S_IWUGO;
+
+ q.name = name;
+ q.len = strlen(name);
+ q.hash = full_name_hash(q.name, q.len),
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
+ dentry = __rpc_lookup_create(parent, &q);
if (IS_ERR(dentry))
- return dentry;
- dir = parent->d_inode;
+ goto out;
if (dentry->d_inode) {
- rpci = RPC_I(dentry->d_inode);
+ struct rpc_inode *rpci = RPC_I(dentry->d_inode);
if (rpci->private != private ||
rpci->ops != ops ||
rpci->flags != flags) {
dput (dentry);
- dentry = ERR_PTR(-EBUSY);
+ err = -EBUSY;
+ goto out_err;
}
rpci->nkern_readwriters++;
goto out;
}
- inode = rpc_get_inode(dir->i_sb, S_IFIFO | S_IRUSR | S_IWUSR);
- if (!inode)
- goto err_dput;
- inode->i_ino = iunique(dir->i_sb, 100);
- inode->i_fop = &rpc_pipe_fops;
- d_instantiate(dentry, inode);
- rpci = RPC_I(inode);
- rpci->private = private;
- rpci->flags = flags;
- rpci->ops = ops;
- rpci->nkern_readwriters = 1;
- fsnotify_create(dir, dentry);
- dget(dentry);
+
+ err = __rpc_mkpipe(dir, dentry, umode, &rpc_pipe_fops,
+ private, ops, flags);
+ if (err)
+ goto out_err;
out:
mutex_unlock(&dir->i_mutex);
return dentry;
-err_dput:
- dput(dentry);
- dentry = ERR_PTR(-ENOMEM);
+out_err:
+ dentry = ERR_PTR(err);
printk(KERN_WARNING "%s: %s() failed to create pipe %s/%s (errno = %d)\n",
__FILE__, __func__, parent->d_name.name, name,
- -ENOMEM);
+ err);
goto out;
}
EXPORT_SYMBOL_GPL(rpc_mkpipe);
@@ -842,19 +826,107 @@
parent = dget_parent(dentry);
dir = parent->d_inode;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- if (--RPC_I(dentry->d_inode)->nkern_readwriters == 0) {
- rpc_close_pipes(dentry->d_inode);
- error = simple_unlink(dir, dentry);
- if (!error)
- d_delete(dentry);
- }
- dput(dentry);
+ error = __rpc_rmpipe(dir, dentry);
mutex_unlock(&dir->i_mutex);
dput(parent);
return error;
}
EXPORT_SYMBOL_GPL(rpc_unlink);
+enum {
+ RPCAUTH_info,
+ RPCAUTH_EOF
+};
+
+static const struct rpc_filelist authfiles[] = {
+ [RPCAUTH_info] = {
+ .name = "info",
+ .i_fop = &rpc_info_operations,
+ .mode = S_IFREG | S_IRUSR,
+ },
+};
+
+static int rpc_clntdir_populate(struct dentry *dentry, void *private)
+{
+ return rpc_populate(dentry,
+ authfiles, RPCAUTH_info, RPCAUTH_EOF,
+ private);
+}
+
+static void rpc_clntdir_depopulate(struct dentry *dentry)
+{
+ rpc_depopulate(dentry, authfiles, RPCAUTH_info, RPCAUTH_EOF);
+}
+
+/**
+ * rpc_create_client_dir - Create a new rpc_client directory in rpc_pipefs
+ * @path: path from the rpc_pipefs root to the new directory
+ * @rpc_client: rpc client to associate with this directory
+ *
+ * This creates a directory at the given @path associated with
+ * @rpc_clnt, which will contain a file named "info" with some basic
+ * information about the client, together with any "pipes" that may
+ * later be created using rpc_mkpipe().
+ */
+struct dentry *rpc_create_client_dir(struct dentry *dentry,
+ struct qstr *name,
+ struct rpc_clnt *rpc_client)
+{
+ return rpc_mkdir_populate(dentry, name, S_IRUGO | S_IXUGO, NULL,
+ rpc_clntdir_populate, rpc_client);
+}
+
+/**
+ * rpc_remove_client_dir - Remove a directory created with rpc_create_client_dir()
+ * @dentry: directory to remove
+ */
+int rpc_remove_client_dir(struct dentry *dentry)
+{
+ return rpc_rmdir_depopulate(dentry, rpc_clntdir_depopulate);
+}
+
+static const struct rpc_filelist cache_pipefs_files[3] = {
+ [0] = {
+ .name = "channel",
+ .i_fop = &cache_file_operations_pipefs,
+ .mode = S_IFREG|S_IRUSR|S_IWUSR,
+ },
+ [1] = {
+ .name = "content",
+ .i_fop = &content_file_operations_pipefs,
+ .mode = S_IFREG|S_IRUSR,
+ },
+ [2] = {
+ .name = "flush",
+ .i_fop = &cache_flush_operations_pipefs,
+ .mode = S_IFREG|S_IRUSR|S_IWUSR,
+ },
+};
+
+static int rpc_cachedir_populate(struct dentry *dentry, void *private)
+{
+ return rpc_populate(dentry,
+ cache_pipefs_files, 0, 3,
+ private);
+}
+
+static void rpc_cachedir_depopulate(struct dentry *dentry)
+{
+ rpc_depopulate(dentry, cache_pipefs_files, 0, 3);
+}
+
+struct dentry *rpc_create_cache_dir(struct dentry *parent, struct qstr *name,
+ mode_t umode, struct cache_detail *cd)
+{
+ return rpc_mkdir_populate(parent, name, umode, NULL,
+ rpc_cachedir_populate, cd);
+}
+
+void rpc_remove_cache_dir(struct dentry *dentry)
+{
+ rpc_rmdir_depopulate(dentry, rpc_cachedir_depopulate);
+}
+
/*
* populate the filesystem
*/
@@ -866,6 +938,51 @@
#define RPCAUTH_GSSMAGIC 0x67596969
+/*
+ * We have a single directory with 1 node in it.
+ */
+enum {
+ RPCAUTH_lockd,
+ RPCAUTH_mount,
+ RPCAUTH_nfs,
+ RPCAUTH_portmap,
+ RPCAUTH_statd,
+ RPCAUTH_nfsd4_cb,
+ RPCAUTH_cache,
+ RPCAUTH_RootEOF
+};
+
+static const struct rpc_filelist files[] = {
+ [RPCAUTH_lockd] = {
+ .name = "lockd",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_mount] = {
+ .name = "mount",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_nfs] = {
+ .name = "nfs",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_portmap] = {
+ .name = "portmap",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_statd] = {
+ .name = "statd",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_nfsd4_cb] = {
+ .name = "nfsd4_cb",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_cache] = {
+ .name = "cache",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+};
+
static int
rpc_fill_super(struct super_block *sb, void *data, int silent)
{
@@ -886,7 +1003,7 @@
iput(inode);
return -ENOMEM;
}
- if (rpc_populate(root, files, RPCAUTH_Root + 1, RPCAUTH_RootEOF))
+ if (rpc_populate(root, files, RPCAUTH_lockd, RPCAUTH_RootEOF, NULL))
goto out;
sb->s_root = root;
return 0;
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index beee6da..830faf4 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -75,6 +75,37 @@
#define RPCB_OWNER_STRING "0"
#define RPCB_MAXOWNERLEN sizeof(RPCB_OWNER_STRING)
+/*
+ * XDR data type sizes
+ */
+#define RPCB_program_sz (1)
+#define RPCB_version_sz (1)
+#define RPCB_protocol_sz (1)
+#define RPCB_port_sz (1)
+#define RPCB_boolean_sz (1)
+
+#define RPCB_netid_sz (1 + XDR_QUADLEN(RPCBIND_MAXNETIDLEN))
+#define RPCB_addr_sz (1 + XDR_QUADLEN(RPCBIND_MAXUADDRLEN))
+#define RPCB_ownerstring_sz (1 + XDR_QUADLEN(RPCB_MAXOWNERLEN))
+
+/*
+ * XDR argument and result sizes
+ */
+#define RPCB_mappingargs_sz (RPCB_program_sz + RPCB_version_sz + \
+ RPCB_protocol_sz + RPCB_port_sz)
+#define RPCB_getaddrargs_sz (RPCB_program_sz + RPCB_version_sz + \
+ RPCB_netid_sz + RPCB_addr_sz + \
+ RPCB_ownerstring_sz)
+
+#define RPCB_getportres_sz RPCB_port_sz
+#define RPCB_setres_sz RPCB_boolean_sz
+
+/*
+ * Note that RFC 1833 does not put any size restrictions on the
+ * address string returned by the remote rpcbind database.
+ */
+#define RPCB_getaddrres_sz RPCB_addr_sz
+
static void rpcb_getport_done(struct rpc_task *, void *);
static void rpcb_map_release(void *data);
static struct rpc_program rpcb_program;
@@ -122,6 +153,7 @@
rpcb_wake_rpcbind_waiters(map->r_xprt, map->r_status);
xprt_put(map->r_xprt);
+ kfree(map->r_addr);
kfree(map);
}
@@ -268,12 +300,9 @@
const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
struct rpcbind_args *map = msg->rpc_argp;
unsigned short port = ntohs(sin->sin_port);
- char buf[32];
+ int result;
- /* Construct AF_INET universal address */
- snprintf(buf, sizeof(buf), "%pI4.%u.%u",
- &sin->sin_addr.s_addr, port >> 8, port & 0xff);
- map->r_addr = buf;
+ map->r_addr = rpc_sockaddr2uaddr(sap);
dprintk("RPC: %sregistering [%u, %u, %s, '%s'] with "
"local rpcbind\n", (port ? "" : "un"),
@@ -284,7 +313,9 @@
if (port)
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
- return rpcb_register_call(RPCBVERS_4, msg);
+ result = rpcb_register_call(RPCBVERS_4, msg);
+ kfree(map->r_addr);
+ return result;
}
/*
@@ -296,16 +327,9 @@
const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)sap;
struct rpcbind_args *map = msg->rpc_argp;
unsigned short port = ntohs(sin6->sin6_port);
- char buf[64];
+ int result;
- /* Construct AF_INET6 universal address */
- if (ipv6_addr_any(&sin6->sin6_addr))
- snprintf(buf, sizeof(buf), "::.%u.%u",
- port >> 8, port & 0xff);
- else
- snprintf(buf, sizeof(buf), "%pI6.%u.%u",
- &sin6->sin6_addr, port >> 8, port & 0xff);
- map->r_addr = buf;
+ map->r_addr = rpc_sockaddr2uaddr(sap);
dprintk("RPC: %sregistering [%u, %u, %s, '%s'] with "
"local rpcbind\n", (port ? "" : "un"),
@@ -316,7 +340,9 @@
if (port)
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
- return rpcb_register_call(RPCBVERS_4, msg);
+ result = rpcb_register_call(RPCBVERS_4, msg);
+ kfree(map->r_addr);
+ return result;
}
static int rpcb_unregister_all_protofamilies(struct rpc_message *msg)
@@ -428,7 +454,7 @@
struct rpc_message msg = {
.rpc_proc = &rpcb_procedures2[RPCBPROC_GETPORT],
.rpc_argp = &map,
- .rpc_resp = &map.r_port,
+ .rpc_resp = &map,
};
struct rpc_clnt *rpcb_clnt;
int status;
@@ -458,7 +484,7 @@
struct rpc_message msg = {
.rpc_proc = proc,
.rpc_argp = map,
- .rpc_resp = &map->r_port,
+ .rpc_resp = map,
};
struct rpc_task_setup task_setup_data = {
.rpc_client = rpcb_clnt,
@@ -539,6 +565,7 @@
goto bailout_nofree;
}
+ /* Parent transport's destination address */
salen = rpc_peeraddr(clnt, sap, sizeof(addr));
/* Don't ever use rpcbind v2 for AF_INET6 requests */
@@ -589,11 +616,22 @@
map->r_prot = xprt->prot;
map->r_port = 0;
map->r_xprt = xprt_get(xprt);
- map->r_netid = rpc_peeraddr2str(clnt, RPC_DISPLAY_NETID);
- map->r_addr = rpc_peeraddr2str(rpcb_clnt, RPC_DISPLAY_UNIVERSAL_ADDR);
- map->r_owner = "";
map->r_status = -EIO;
+ switch (bind_version) {
+ case RPCBVERS_4:
+ case RPCBVERS_3:
+ map->r_netid = rpc_peeraddr2str(clnt, RPC_DISPLAY_NETID);
+ map->r_addr = rpc_sockaddr2uaddr(sap);
+ map->r_owner = "";
+ break;
+ case RPCBVERS_2:
+ map->r_addr = NULL;
+ break;
+ default:
+ BUG();
+ }
+
child = rpcb_call_async(rpcb_clnt, map, proc);
rpc_release_client(rpcb_clnt);
if (IS_ERR(child)) {
@@ -656,176 +694,278 @@
* XDR functions for rpcbind
*/
-static int rpcb_encode_mapping(struct rpc_rqst *req, __be32 *p,
- struct rpcbind_args *rpcb)
+static int rpcb_enc_mapping(struct rpc_rqst *req, __be32 *p,
+ const struct rpcbind_args *rpcb)
{
- dprintk("RPC: encoding rpcb request (%u, %u, %d, %u)\n",
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+
+ dprintk("RPC: %5u encoding PMAP_%s call (%u, %u, %d, %u)\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name,
rpcb->r_prog, rpcb->r_vers, rpcb->r_prot, rpcb->r_port);
+
+ xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+
+ p = xdr_reserve_space(&xdr, sizeof(__be32) * RPCB_mappingargs_sz);
+ if (unlikely(p == NULL))
+ return -EIO;
+
*p++ = htonl(rpcb->r_prog);
*p++ = htonl(rpcb->r_vers);
*p++ = htonl(rpcb->r_prot);
- *p++ = htonl(rpcb->r_port);
+ *p = htonl(rpcb->r_port);
- req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
return 0;
}
-static int rpcb_decode_getport(struct rpc_rqst *req, __be32 *p,
- unsigned short *portp)
+static int rpcb_dec_getport(struct rpc_rqst *req, __be32 *p,
+ struct rpcbind_args *rpcb)
{
- *portp = (unsigned short) ntohl(*p++);
- dprintk("RPC: rpcb getport result: %u\n",
- *portp);
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+ unsigned long port;
+
+ xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+ rpcb->r_port = 0;
+
+ p = xdr_inline_decode(&xdr, sizeof(__be32));
+ if (unlikely(p == NULL))
+ return -EIO;
+
+ port = ntohl(*p);
+ dprintk("RPC: %5u PMAP_%s result: %lu\n", task->tk_pid,
+ task->tk_msg.rpc_proc->p_name, port);
+ if (unlikely(port > USHORT_MAX))
+ return -EIO;
+
+ rpcb->r_port = port;
return 0;
}
-static int rpcb_decode_set(struct rpc_rqst *req, __be32 *p,
- unsigned int *boolp)
+static int rpcb_dec_set(struct rpc_rqst *req, __be32 *p,
+ unsigned int *boolp)
{
- *boolp = (unsigned int) ntohl(*p++);
- dprintk("RPC: rpcb set/unset call %s\n",
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+
+ xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+ p = xdr_inline_decode(&xdr, sizeof(__be32));
+ if (unlikely(p == NULL))
+ return -EIO;
+
+ *boolp = 0;
+ if (*p)
+ *boolp = 1;
+
+ dprintk("RPC: %5u RPCB_%s call %s\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name,
(*boolp ? "succeeded" : "failed"));
return 0;
}
-static int rpcb_encode_getaddr(struct rpc_rqst *req, __be32 *p,
- struct rpcbind_args *rpcb)
+static int encode_rpcb_string(struct xdr_stream *xdr, const char *string,
+ const u32 maxstrlen)
{
- dprintk("RPC: encoding rpcb request (%u, %u, %s)\n",
- rpcb->r_prog, rpcb->r_vers, rpcb->r_addr);
- *p++ = htonl(rpcb->r_prog);
- *p++ = htonl(rpcb->r_vers);
+ u32 len;
+ __be32 *p;
- p = xdr_encode_string(p, rpcb->r_netid);
- p = xdr_encode_string(p, rpcb->r_addr);
- p = xdr_encode_string(p, rpcb->r_owner);
+ if (unlikely(string == NULL))
+ return -EIO;
+ len = strlen(string);
+ if (unlikely(len > maxstrlen))
+ return -EIO;
- req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+ p = xdr_reserve_space(xdr, sizeof(__be32) + len);
+ if (unlikely(p == NULL))
+ return -EIO;
+ xdr_encode_opaque(p, string, len);
return 0;
}
-static int rpcb_decode_getaddr(struct rpc_rqst *req, __be32 *p,
- unsigned short *portp)
+static int rpcb_enc_getaddr(struct rpc_rqst *req, __be32 *p,
+ const struct rpcbind_args *rpcb)
{
- char *addr;
- u32 addr_len;
- int c, i, f, first, val;
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
- *portp = 0;
- addr_len = ntohl(*p++);
+ dprintk("RPC: %5u encoding RPCB_%s call (%u, %u, '%s', '%s')\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name,
+ rpcb->r_prog, rpcb->r_vers,
+ rpcb->r_netid, rpcb->r_addr);
- if (addr_len == 0) {
- dprintk("RPC: rpcb_decode_getaddr: "
- "service is not registered\n");
+ xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+
+ p = xdr_reserve_space(&xdr,
+ sizeof(__be32) * (RPCB_program_sz + RPCB_version_sz));
+ if (unlikely(p == NULL))
+ return -EIO;
+ *p++ = htonl(rpcb->r_prog);
+ *p = htonl(rpcb->r_vers);
+
+ if (encode_rpcb_string(&xdr, rpcb->r_netid, RPCBIND_MAXNETIDLEN))
+ return -EIO;
+ if (encode_rpcb_string(&xdr, rpcb->r_addr, RPCBIND_MAXUADDRLEN))
+ return -EIO;
+ if (encode_rpcb_string(&xdr, rpcb->r_owner, RPCB_MAXOWNERLEN))
+ return -EIO;
+
+ return 0;
+}
+
+static int rpcb_dec_getaddr(struct rpc_rqst *req, __be32 *p,
+ struct rpcbind_args *rpcb)
+{
+ struct sockaddr_storage address;
+ struct sockaddr *sap = (struct sockaddr *)&address;
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+ u32 len;
+
+ rpcb->r_port = 0;
+
+ xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+ p = xdr_inline_decode(&xdr, sizeof(__be32));
+ if (unlikely(p == NULL))
+ goto out_fail;
+ len = ntohl(*p);
+
+ /*
+ * If the returned universal address is a null string,
+ * the requested RPC service was not registered.
+ */
+ if (len == 0) {
+ dprintk("RPC: %5u RPCB reply: program not registered\n",
+ task->tk_pid);
return 0;
}
- /*
- * Simple sanity check.
- */
- if (addr_len > RPCBIND_MAXUADDRLEN)
- goto out_err;
+ if (unlikely(len > RPCBIND_MAXUADDRLEN))
+ goto out_fail;
- /*
- * Start at the end and walk backwards until the first dot
- * is encountered. When the second dot is found, we have
- * both parts of the port number.
- */
- addr = (char *)p;
- val = 0;
- first = 1;
- f = 1;
- for (i = addr_len - 1; i > 0; i--) {
- c = addr[i];
- if (c >= '0' && c <= '9') {
- val += (c - '0') * f;
- f *= 10;
- } else if (c == '.') {
- if (first) {
- *portp = val;
- val = first = 0;
- f = 1;
- } else {
- *portp |= (val << 8);
- break;
- }
- }
- }
+ p = xdr_inline_decode(&xdr, len);
+ if (unlikely(p == NULL))
+ goto out_fail;
+ dprintk("RPC: %5u RPCB_%s reply: %s\n", task->tk_pid,
+ task->tk_msg.rpc_proc->p_name, (char *)p);
- /*
- * Simple sanity check. If we never saw a dot in the reply,
- * then this was probably just garbage.
- */
- if (first)
- goto out_err;
+ if (rpc_uaddr2sockaddr((char *)p, len, sap, sizeof(address)) == 0)
+ goto out_fail;
+ rpcb->r_port = rpc_get_port(sap);
- dprintk("RPC: rpcb_decode_getaddr port=%u\n", *portp);
return 0;
-out_err:
- dprintk("RPC: rpcbind server returned malformed reply\n");
+out_fail:
+ dprintk("RPC: %5u malformed RPCB_%s reply\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name);
return -EIO;
}
-#define RPCB_program_sz (1u)
-#define RPCB_version_sz (1u)
-#define RPCB_protocol_sz (1u)
-#define RPCB_port_sz (1u)
-#define RPCB_boolean_sz (1u)
-
-#define RPCB_netid_sz (1+XDR_QUADLEN(RPCBIND_MAXNETIDLEN))
-#define RPCB_addr_sz (1+XDR_QUADLEN(RPCBIND_MAXUADDRLEN))
-#define RPCB_ownerstring_sz (1+XDR_QUADLEN(RPCB_MAXOWNERLEN))
-
-#define RPCB_mappingargs_sz RPCB_program_sz+RPCB_version_sz+ \
- RPCB_protocol_sz+RPCB_port_sz
-#define RPCB_getaddrargs_sz RPCB_program_sz+RPCB_version_sz+ \
- RPCB_netid_sz+RPCB_addr_sz+ \
- RPCB_ownerstring_sz
-
-#define RPCB_setres_sz RPCB_boolean_sz
-#define RPCB_getportres_sz RPCB_port_sz
-
-/*
- * Note that RFC 1833 does not put any size restrictions on the
- * address string returned by the remote rpcbind database.
- */
-#define RPCB_getaddrres_sz RPCB_addr_sz
-
-#define PROC(proc, argtype, restype) \
- [RPCBPROC_##proc] = { \
- .p_proc = RPCBPROC_##proc, \
- .p_encode = (kxdrproc_t) rpcb_encode_##argtype, \
- .p_decode = (kxdrproc_t) rpcb_decode_##restype, \
- .p_arglen = RPCB_##argtype##args_sz, \
- .p_replen = RPCB_##restype##res_sz, \
- .p_statidx = RPCBPROC_##proc, \
- .p_timer = 0, \
- .p_name = #proc, \
- }
-
/*
* Not all rpcbind procedures described in RFC 1833 are implemented
* since the Linux kernel RPC code requires only these.
*/
+
static struct rpc_procinfo rpcb_procedures2[] = {
- PROC(SET, mapping, set),
- PROC(UNSET, mapping, set),
- PROC(GETPORT, mapping, getport),
+ [RPCBPROC_SET] = {
+ .p_proc = RPCBPROC_SET,
+ .p_encode = (kxdrproc_t)rpcb_enc_mapping,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_mappingargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_SET,
+ .p_timer = 0,
+ .p_name = "SET",
+ },
+ [RPCBPROC_UNSET] = {
+ .p_proc = RPCBPROC_UNSET,
+ .p_encode = (kxdrproc_t)rpcb_enc_mapping,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_mappingargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_UNSET,
+ .p_timer = 0,
+ .p_name = "UNSET",
+ },
+ [RPCBPROC_GETPORT] = {
+ .p_proc = RPCBPROC_GETPORT,
+ .p_encode = (kxdrproc_t)rpcb_enc_mapping,
+ .p_decode = (kxdrproc_t)rpcb_dec_getport,
+ .p_arglen = RPCB_mappingargs_sz,
+ .p_replen = RPCB_getportres_sz,
+ .p_statidx = RPCBPROC_GETPORT,
+ .p_timer = 0,
+ .p_name = "GETPORT",
+ },
};
static struct rpc_procinfo rpcb_procedures3[] = {
- PROC(SET, getaddr, set),
- PROC(UNSET, getaddr, set),
- PROC(GETADDR, getaddr, getaddr),
+ [RPCBPROC_SET] = {
+ .p_proc = RPCBPROC_SET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_SET,
+ .p_timer = 0,
+ .p_name = "SET",
+ },
+ [RPCBPROC_UNSET] = {
+ .p_proc = RPCBPROC_UNSET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_UNSET,
+ .p_timer = 0,
+ .p_name = "UNSET",
+ },
+ [RPCBPROC_GETADDR] = {
+ .p_proc = RPCBPROC_GETADDR,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_getaddr,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_getaddrres_sz,
+ .p_statidx = RPCBPROC_GETADDR,
+ .p_timer = 0,
+ .p_name = "GETADDR",
+ },
};
static struct rpc_procinfo rpcb_procedures4[] = {
- PROC(SET, getaddr, set),
- PROC(UNSET, getaddr, set),
- PROC(GETADDR, getaddr, getaddr),
- PROC(GETVERSADDR, getaddr, getaddr),
+ [RPCBPROC_SET] = {
+ .p_proc = RPCBPROC_SET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_SET,
+ .p_timer = 0,
+ .p_name = "SET",
+ },
+ [RPCBPROC_UNSET] = {
+ .p_proc = RPCBPROC_UNSET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_UNSET,
+ .p_timer = 0,
+ .p_name = "UNSET",
+ },
+ [RPCBPROC_GETADDR] = {
+ .p_proc = RPCBPROC_GETADDR,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_getaddr,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_getaddrres_sz,
+ .p_statidx = RPCBPROC_GETADDR,
+ .p_timer = 0,
+ .p_name = "GETADDR",
+ },
};
static struct rpcb_info rpcb_next_version[] = {
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index adaa819..8cce921 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -69,5 +69,5 @@
rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
MODULE_LICENSE("GPL");
-module_init(init_sunrpc);
+fs_initcall(init_sunrpc); /* Ensure we're initialised before nfs */
module_exit(cleanup_sunrpc);
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 5c865e2..6caffa3 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -171,6 +171,11 @@
(*bpp)[-1] = '\n';
}
+static int ip_map_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, ip_map_request);
+}
+
static struct ip_map *ip_map_lookup(char *class, struct in6_addr *addr);
static int ip_map_update(struct ip_map *ipm, struct unix_domain *udom, time_t expiry);
@@ -289,7 +294,7 @@
.hash_table = ip_table,
.name = "auth.unix.ip",
.cache_put = ip_map_put,
- .cache_request = ip_map_request,
+ .cache_upcall = ip_map_upcall,
.cache_parse = ip_map_parse,
.cache_show = ip_map_show,
.match = ip_map_match,
@@ -523,6 +528,11 @@
(*bpp)[-1] = '\n';
}
+static int unix_gid_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, unix_gid_request);
+}
+
static struct unix_gid *unix_gid_lookup(uid_t uid);
extern struct cache_detail unix_gid_cache;
@@ -622,7 +632,7 @@
.hash_table = gid_table,
.name = "auth.unix.gid",
.cache_put = unix_gid_put,
- .cache_request = unix_gid_request,
+ .cache_upcall = unix_gid_upcall,
.cache_parse = unix_gid_parse,
.cache_show = unix_gid_show,
.match = unix_gid_match,
diff --git a/net/sunrpc/timer.c b/net/sunrpc/timer.c
index 31becbf..dd82434 100644
--- a/net/sunrpc/timer.c
+++ b/net/sunrpc/timer.c
@@ -25,8 +25,13 @@
#define RPC_RTO_INIT (HZ/5)
#define RPC_RTO_MIN (HZ/10)
-void
-rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
+/**
+ * rpc_init_rtt - Initialize an RPC RTT estimator context
+ * @rt: context to initialize
+ * @timeo: initial timeout value, in jiffies
+ *
+ */
+void rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
{
unsigned long init = 0;
unsigned i;
@@ -43,12 +48,16 @@
}
EXPORT_SYMBOL_GPL(rpc_init_rtt);
-/*
+/**
+ * rpc_update_rtt - Update an RPC RTT estimator context
+ * @rt: context to update
+ * @timer: timer array index (request type)
+ * @m: recent actual RTT, in jiffies
+ *
* NB: When computing the smoothed RTT and standard deviation,
* be careful not to produce negative intermediate results.
*/
-void
-rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m)
+void rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m)
{
long *srtt, *sdrtt;
@@ -79,21 +88,25 @@
}
EXPORT_SYMBOL_GPL(rpc_update_rtt);
-/*
- * Estimate rto for an nfs rpc sent via. an unreliable datagram.
- * Use the mean and mean deviation of rtt for the appropriate type of rpc
- * for the frequent rpcs and a default for the others.
- * The justification for doing "other" this way is that these rpcs
- * happen so infrequently that timer est. would probably be stale.
- * Also, since many of these rpcs are
- * non-idempotent, a conservative timeout is desired.
+/**
+ * rpc_calc_rto - Provide an estimated timeout value
+ * @rt: context to use for calculation
+ * @timer: timer array index (request type)
+ *
+ * Estimate RTO for an NFS RPC sent via an unreliable datagram. Use
+ * the mean and mean deviation of RTT for the appropriate type of RPC
+ * for frequently issued RPCs, and a fixed default for the others.
+ *
+ * The justification for doing "other" this way is that these RPCs
+ * happen so infrequently that timer estimation would probably be
+ * stale. Also, since many of these RPCs are non-idempotent, a
+ * conservative timeout is desired.
+ *
* getattr, lookup,
* read, write, commit - A+4D
* other - timeo
*/
-
-unsigned long
-rpc_calc_rto(struct rpc_rtt *rt, unsigned timer)
+unsigned long rpc_calc_rto(struct rpc_rtt *rt, unsigned timer)
{
unsigned long res;
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index 406e26d..8bd690c 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -24,7 +24,7 @@
unsigned int quadlen = XDR_QUADLEN(obj->len);
p[quadlen] = 0; /* zero trailing bytes */
- *p++ = htonl(obj->len);
+ *p++ = cpu_to_be32(obj->len);
memcpy(p, obj->data, obj->len);
return p + XDR_QUADLEN(obj->len);
}
@@ -35,7 +35,7 @@
{
unsigned int len;
- if ((len = ntohl(*p++)) > XDR_MAX_NETOBJ)
+ if ((len = be32_to_cpu(*p++)) > XDR_MAX_NETOBJ)
return NULL;
obj->len = len;
obj->data = (u8 *) p;
@@ -83,7 +83,7 @@
*/
__be32 *xdr_encode_opaque(__be32 *p, const void *ptr, unsigned int nbytes)
{
- *p++ = htonl(nbytes);
+ *p++ = cpu_to_be32(nbytes);
return xdr_encode_opaque_fixed(p, ptr, nbytes);
}
EXPORT_SYMBOL_GPL(xdr_encode_opaque);
@@ -101,7 +101,7 @@
{
u32 len;
- len = ntohl(*p++);
+ len = be32_to_cpu(*p++);
if (len > maxlen)
return NULL;
*lenp = len;
@@ -771,7 +771,7 @@
status = read_bytes_from_xdr_buf(buf, base, &raw, sizeof(*obj));
if (status)
return status;
- *obj = ntohl(raw);
+ *obj = be32_to_cpu(raw);
return 0;
}
EXPORT_SYMBOL_GPL(xdr_decode_word);
@@ -779,7 +779,7 @@
int
xdr_encode_word(struct xdr_buf *buf, unsigned int base, u32 obj)
{
- __be32 raw = htonl(obj);
+ __be32 raw = cpu_to_be32(obj);
return write_bytes_to_xdr_buf(buf, base, &raw, sizeof(obj));
}
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 1dd6123..9a63f66 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -168,47 +168,25 @@
static void
xprt_rdma_format_addresses(struct rpc_xprt *xprt)
{
- struct sockaddr_in *addr = (struct sockaddr_in *)
+ struct sockaddr *sap = (struct sockaddr *)
&rpcx_to_rdmad(xprt).addr;
- char *buf;
+ struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+ char buf[64];
- buf = kzalloc(20, GFP_KERNEL);
- if (buf)
- snprintf(buf, 20, "%pI4", &addr->sin_addr.s_addr);
- xprt->address_strings[RPC_DISPLAY_ADDR] = buf;
+ (void)rpc_ntop(sap, buf, sizeof(buf));
+ xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
- buf = kzalloc(8, GFP_KERNEL);
- if (buf)
- snprintf(buf, 8, "%u", ntohs(addr->sin_port));
- xprt->address_strings[RPC_DISPLAY_PORT] = buf;
+ (void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
xprt->address_strings[RPC_DISPLAY_PROTO] = "rdma";
- buf = kzalloc(48, GFP_KERNEL);
- if (buf)
- snprintf(buf, 48, "addr=%pI4 port=%u proto=%s",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port), "rdma");
- xprt->address_strings[RPC_DISPLAY_ALL] = buf;
+ (void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
+ NIPQUAD(sin->sin_addr.s_addr));
+ xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
- buf = kzalloc(10, GFP_KERNEL);
- if (buf)
- snprintf(buf, 10, "%02x%02x%02x%02x",
- NIPQUAD(addr->sin_addr.s_addr));
- xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf)
- snprintf(buf, 8, "%4hx", ntohs(addr->sin_port));
- xprt->address_strings[RPC_DISPLAY_HEX_PORT] = buf;
-
- buf = kzalloc(30, GFP_KERNEL);
- if (buf)
- snprintf(buf, 30, "%pI4.%u.%u",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port) >> 8,
- ntohs(addr->sin_port) & 0xff);
- xprt->address_strings[RPC_DISPLAY_UNIVERSAL_ADDR] = buf;
+ (void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
/* netid */
xprt->address_strings[RPC_DISPLAY_NETID] = "rdma";
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 83c73c4..62438f3 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -248,8 +248,8 @@
* Connection of transports
*/
struct delayed_work connect_worker;
- struct sockaddr_storage addr;
- unsigned short port;
+ struct sockaddr_storage srcaddr;
+ unsigned short srcport;
/*
* UDP socket buffer size parameters
@@ -296,117 +296,60 @@
return (struct sockaddr_in6 *) &xprt->addr;
}
-static void xs_format_ipv4_peer_addresses(struct rpc_xprt *xprt,
- const char *protocol,
- const char *netid)
+static void xs_format_common_peer_addresses(struct rpc_xprt *xprt)
{
- struct sockaddr_in *addr = xs_addr_in(xprt);
- char *buf;
+ struct sockaddr *sap = xs_addr(xprt);
+ struct sockaddr_in6 *sin6;
+ struct sockaddr_in *sin;
+ char buf[128];
- buf = kzalloc(20, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 20, "%pI4", &addr->sin_addr.s_addr);
+ (void)rpc_ntop(sap, buf, sizeof(buf));
+ xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
+
+ switch (sap->sa_family) {
+ case AF_INET:
+ sin = xs_addr_in(xprt);
+ (void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
+ NIPQUAD(sin->sin_addr.s_addr));
+ break;
+ case AF_INET6:
+ sin6 = xs_addr_in6(xprt);
+ (void)snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
+ break;
+ default:
+ BUG();
}
- xprt->address_strings[RPC_DISPLAY_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%u",
- ntohs(addr->sin_port));
- }
- xprt->address_strings[RPC_DISPLAY_PORT] = buf;
-
- xprt->address_strings[RPC_DISPLAY_PROTO] = protocol;
-
- buf = kzalloc(48, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 48, "addr=%pI4 port=%u proto=%s",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port),
- protocol);
- }
- xprt->address_strings[RPC_DISPLAY_ALL] = buf;
-
- buf = kzalloc(10, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 10, "%02x%02x%02x%02x",
- NIPQUAD(addr->sin_addr.s_addr));
- }
- xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%4hx",
- ntohs(addr->sin_port));
- }
- xprt->address_strings[RPC_DISPLAY_HEX_PORT] = buf;
-
- buf = kzalloc(30, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 30, "%pI4.%u.%u",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port) >> 8,
- ntohs(addr->sin_port) & 0xff);
- }
- xprt->address_strings[RPC_DISPLAY_UNIVERSAL_ADDR] = buf;
-
- xprt->address_strings[RPC_DISPLAY_NETID] = netid;
+ xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
}
-static void xs_format_ipv6_peer_addresses(struct rpc_xprt *xprt,
- const char *protocol,
- const char *netid)
+static void xs_format_common_peer_ports(struct rpc_xprt *xprt)
{
- struct sockaddr_in6 *addr = xs_addr_in6(xprt);
- char *buf;
+ struct sockaddr *sap = xs_addr(xprt);
+ char buf[128];
- buf = kzalloc(40, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 40, "%pI6",&addr->sin6_addr);
- }
- xprt->address_strings[RPC_DISPLAY_ADDR] = buf;
+ (void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%u",
- ntohs(addr->sin6_port));
- }
- xprt->address_strings[RPC_DISPLAY_PORT] = buf;
+ (void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
+}
+static void xs_format_peer_addresses(struct rpc_xprt *xprt,
+ const char *protocol,
+ const char *netid)
+{
xprt->address_strings[RPC_DISPLAY_PROTO] = protocol;
-
- buf = kzalloc(64, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 64, "addr=%pI6 port=%u proto=%s",
- &addr->sin6_addr,
- ntohs(addr->sin6_port),
- protocol);
- }
- xprt->address_strings[RPC_DISPLAY_ALL] = buf;
-
- buf = kzalloc(36, GFP_KERNEL);
- if (buf)
- snprintf(buf, 36, "%pi6", &addr->sin6_addr);
-
- xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%4hx",
- ntohs(addr->sin6_port));
- }
- xprt->address_strings[RPC_DISPLAY_HEX_PORT] = buf;
-
- buf = kzalloc(50, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 50, "%pI6.%u.%u",
- &addr->sin6_addr,
- ntohs(addr->sin6_port) >> 8,
- ntohs(addr->sin6_port) & 0xff);
- }
- xprt->address_strings[RPC_DISPLAY_UNIVERSAL_ADDR] = buf;
-
xprt->address_strings[RPC_DISPLAY_NETID] = netid;
+ xs_format_common_peer_addresses(xprt);
+ xs_format_common_peer_ports(xprt);
+}
+
+static void xs_update_peer_port(struct rpc_xprt *xprt)
+{
+ kfree(xprt->address_strings[RPC_DISPLAY_HEX_PORT]);
+ kfree(xprt->address_strings[RPC_DISPLAY_PORT]);
+
+ xs_format_common_peer_ports(xprt);
}
static void xs_free_peer_addresses(struct rpc_xprt *xprt)
@@ -1587,25 +1530,15 @@
*/
static void xs_set_port(struct rpc_xprt *xprt, unsigned short port)
{
- struct sockaddr *addr = xs_addr(xprt);
-
dprintk("RPC: setting port for xprt %p to %u\n", xprt, port);
- switch (addr->sa_family) {
- case AF_INET:
- ((struct sockaddr_in *)addr)->sin_port = htons(port);
- break;
- case AF_INET6:
- ((struct sockaddr_in6 *)addr)->sin6_port = htons(port);
- break;
- default:
- BUG();
- }
+ rpc_set_port(xs_addr(xprt), port);
+ xs_update_peer_port(xprt);
}
static unsigned short xs_get_srcport(struct sock_xprt *transport, struct socket *sock)
{
- unsigned short port = transport->port;
+ unsigned short port = transport->srcport;
if (port == 0 && transport->xprt.resvport)
port = xs_get_random_port();
@@ -1614,8 +1547,8 @@
static unsigned short xs_next_srcport(struct sock_xprt *transport, struct socket *sock, unsigned short port)
{
- if (transport->port != 0)
- transport->port = 0;
+ if (transport->srcport != 0)
+ transport->srcport = 0;
if (!transport->xprt.resvport)
return 0;
if (port <= xprt_min_resvport || port > xprt_max_resvport)
@@ -1633,7 +1566,7 @@
unsigned short port = xs_get_srcport(transport, sock);
unsigned short last;
- sa = (struct sockaddr_in *)&transport->addr;
+ sa = (struct sockaddr_in *)&transport->srcaddr;
myaddr.sin_addr = sa->sin_addr;
do {
myaddr.sin_port = htons(port);
@@ -1642,7 +1575,7 @@
if (port == 0)
break;
if (err == 0) {
- transport->port = port;
+ transport->srcport = port;
break;
}
last = port;
@@ -1666,7 +1599,7 @@
unsigned short port = xs_get_srcport(transport, sock);
unsigned short last;
- sa = (struct sockaddr_in6 *)&transport->addr;
+ sa = (struct sockaddr_in6 *)&transport->srcaddr;
myaddr.sin6_addr = sa->sin6_addr;
do {
myaddr.sin6_port = htons(port);
@@ -1675,7 +1608,7 @@
if (port == 0)
break;
if (err == 0) {
- transport->port = port;
+ transport->srcport = port;
break;
}
last = port;
@@ -1780,8 +1713,11 @@
goto out;
}
- dprintk("RPC: worker connecting xprt %p to address: %s\n",
- xprt, xprt->address_strings[RPC_DISPLAY_ALL]);
+ dprintk("RPC: worker connecting xprt %p via %s to "
+ "%s (port %s)\n", xprt,
+ xprt->address_strings[RPC_DISPLAY_PROTO],
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT]);
xs_udp_finish_connecting(xprt, sock);
status = 0;
@@ -1822,8 +1758,11 @@
goto out;
}
- dprintk("RPC: worker connecting xprt %p to address: %s\n",
- xprt, xprt->address_strings[RPC_DISPLAY_ALL]);
+ dprintk("RPC: worker connecting xprt %p via %s to "
+ "%s (port %s)\n", xprt,
+ xprt->address_strings[RPC_DISPLAY_PROTO],
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT]);
xs_udp_finish_connecting(xprt, sock);
status = 0;
@@ -1948,8 +1887,11 @@
goto out_eagain;
}
- dprintk("RPC: worker connecting xprt %p to address: %s\n",
- xprt, xprt->address_strings[RPC_DISPLAY_ALL]);
+ dprintk("RPC: worker connecting xprt %p via %s to "
+ "%s (port %s)\n", xprt,
+ xprt->address_strings[RPC_DISPLAY_PROTO],
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT]);
status = xs_tcp_finish_connecting(xprt, sock);
dprintk("RPC: %p connect status %d connected %d sock state %d\n",
@@ -2120,7 +2062,7 @@
struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
seq_printf(seq, "\txprt:\tudp %u %lu %lu %lu %lu %Lu %Lu\n",
- transport->port,
+ transport->srcport,
xprt->stat.bind_count,
xprt->stat.sends,
xprt->stat.recvs,
@@ -2144,7 +2086,7 @@
idle_time = (long)(jiffies - xprt->last_used) / HZ;
seq_printf(seq, "\txprt:\ttcp %u %lu %lu %lu %ld %lu %lu %lu %Lu %Lu\n",
- transport->port,
+ transport->srcport,
xprt->stat.bind_count,
xprt->stat.connect_count,
xprt->stat.connect_time,
@@ -2223,7 +2165,7 @@
memcpy(&xprt->addr, args->dstaddr, args->addrlen);
xprt->addrlen = args->addrlen;
if (args->srcaddr)
- memcpy(&new->addr, args->srcaddr, args->addrlen);
+ memcpy(&new->srcaddr, args->srcaddr, args->addrlen);
return xprt;
}
@@ -2272,7 +2214,7 @@
INIT_DELAYED_WORK(&transport->connect_worker,
xs_udp_connect_worker4);
- xs_format_ipv4_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP);
+ xs_format_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP);
break;
case AF_INET6:
if (((struct sockaddr_in6 *)addr)->sin6_port != htons(0))
@@ -2280,15 +2222,22 @@
INIT_DELAYED_WORK(&transport->connect_worker,
xs_udp_connect_worker6);
- xs_format_ipv6_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP6);
+ xs_format_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP6);
break;
default:
kfree(xprt);
return ERR_PTR(-EAFNOSUPPORT);
}
- dprintk("RPC: set up transport to address %s\n",
- xprt->address_strings[RPC_DISPLAY_ALL]);
+ if (xprt_bound(xprt))
+ dprintk("RPC: set up xprt to %s (port %s) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
+ else
+ dprintk("RPC: set up xprt to %s (autobind) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
if (try_module_get(THIS_MODULE))
return xprt;
@@ -2337,23 +2286,33 @@
if (((struct sockaddr_in *)addr)->sin_port != htons(0))
xprt_set_bound(xprt);
- INIT_DELAYED_WORK(&transport->connect_worker, xs_tcp_connect_worker4);
- xs_format_ipv4_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP);
+ INIT_DELAYED_WORK(&transport->connect_worker,
+ xs_tcp_connect_worker4);
+ xs_format_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP);
break;
case AF_INET6:
if (((struct sockaddr_in6 *)addr)->sin6_port != htons(0))
xprt_set_bound(xprt);
- INIT_DELAYED_WORK(&transport->connect_worker, xs_tcp_connect_worker6);
- xs_format_ipv6_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP6);
+ INIT_DELAYED_WORK(&transport->connect_worker,
+ xs_tcp_connect_worker6);
+ xs_format_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP6);
break;
default:
kfree(xprt);
return ERR_PTR(-EAFNOSUPPORT);
}
- dprintk("RPC: set up transport to address %s\n",
- xprt->address_strings[RPC_DISPLAY_ALL]);
+ if (xprt_bound(xprt))
+ dprintk("RPC: set up xprt to %s (port %s) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
+ else
+ dprintk("RPC: set up xprt to %s (autobind) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
+
if (try_module_get(THIS_MODULE))
return xprt;
@@ -2412,3 +2371,55 @@
xprt_unregister_transport(&xs_udp_transport);
xprt_unregister_transport(&xs_tcp_transport);
}
+
+static int param_set_uint_minmax(const char *val, struct kernel_param *kp,
+ unsigned int min, unsigned int max)
+{
+ unsigned long num;
+ int ret;
+
+ if (!val)
+ return -EINVAL;
+ ret = strict_strtoul(val, 0, &num);
+ if (ret == -EINVAL || num < min || num > max)
+ return -EINVAL;
+ *((unsigned int *)kp->arg) = num;
+ return 0;
+}
+
+static int param_set_portnr(const char *val, struct kernel_param *kp)
+{
+ return param_set_uint_minmax(val, kp,
+ RPC_MIN_RESVPORT,
+ RPC_MAX_RESVPORT);
+}
+
+static int param_get_portnr(char *buffer, struct kernel_param *kp)
+{
+ return param_get_uint(buffer, kp);
+}
+#define param_check_portnr(name, p) \
+ __param_check(name, p, unsigned int);
+
+module_param_named(min_resvport, xprt_min_resvport, portnr, 0644);
+module_param_named(max_resvport, xprt_max_resvport, portnr, 0644);
+
+static int param_set_slot_table_size(const char *val, struct kernel_param *kp)
+{
+ return param_set_uint_minmax(val, kp,
+ RPC_MIN_SLOT_TABLE,
+ RPC_MAX_SLOT_TABLE);
+}
+
+static int param_get_slot_table_size(char *buffer, struct kernel_param *kp)
+{
+ return param_get_uint(buffer, kp);
+}
+#define param_check_slot_table_size(name, p) \
+ __param_check(name, p, unsigned int);
+
+module_param_named(tcp_slot_table_entries, xprt_tcp_slot_table_entries,
+ slot_table_size, 0644);
+module_param_named(udp_slot_table_entries, xprt_udp_slot_table_entries,
+ slot_table_size, 0644);
+
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index a7a3677..327011f 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -119,7 +119,7 @@
warn("Media <%s> rejected, no broadcast address\n", name);
goto exit;
}
- if ((bearer_priority < TIPC_MIN_LINK_PRI) &&
+ if ((bearer_priority < TIPC_MIN_LINK_PRI) ||
(bearer_priority > TIPC_MAX_LINK_PRI)) {
warn("Media <%s> rejected, illegal priority (%u)\n", name,
bearer_priority);
diff --git a/net/tipc/netlink.c b/net/tipc/netlink.c
index 3c57005..7bda8e3 100644
--- a/net/tipc/netlink.c
+++ b/net/tipc/netlink.c
@@ -62,7 +62,7 @@
rep_nlh = nlmsg_hdr(rep_buf);
memcpy(rep_nlh, req_nlh, hdr_space);
rep_nlh->nlmsg_len = rep_buf->len;
- genlmsg_unicast(rep_buf, NETLINK_CB(skb).pid);
+ genlmsg_unicast(&init_net, rep_buf, NETLINK_CB(skb).pid);
}
return 0;
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 1848693..e8254e8 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1748,6 +1748,12 @@
value = jiffies_to_msecs(sk->sk_rcvtimeo);
/* no need to set "res", since already 0 at this point */
break;
+ case TIPC_NODE_RECVQ_DEPTH:
+ value = (u32)atomic_read(&tipc_queue_size);
+ break;
+ case TIPC_SOCK_RECVQ_DEPTH:
+ value = skb_queue_len(&sk->sk_receive_queue);
+ break;
default:
res = -EINVAL;
}
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index fc3ebb9..51ab497 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1501,6 +1501,7 @@
struct sk_buff *skb;
int sent = 0;
struct scm_cookie tmp_scm;
+ bool fds_sent = false;
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
@@ -1562,12 +1563,14 @@
size = min_t(int, size, skb_tailroom(skb));
memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred));
- if (siocb->scm->fp) {
+ /* Only send the fds in the first buffer */
+ if (siocb->scm->fp && !fds_sent) {
err = unix_attach_fds(siocb->scm, skb);
if (err) {
kfree_skb(skb);
goto out_err;
}
+ fds_sent = true;
}
err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 4428dd5..abf7ca3 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,6 +1,47 @@
config CFG80211
- tristate "Improved wireless configuration API"
+ tristate "cfg80211 - wireless configuration API"
depends on RFKILL || !RFKILL
+ ---help---
+ cfg80211 is the Linux wireless LAN (802.11) configuration API.
+ Enable this if you have a wireless device.
+
+ For more information refer to documentation on the wireless wiki:
+
+ http://wireless.kernel.org/en/developers/Documentation/cfg80211
+
+ When built as a module it will be called cfg80211.
+
+config NL80211_TESTMODE
+ bool "nl80211 testmode command"
+ depends on CFG80211
+ help
+ The nl80211 testmode command helps implementing things like
+ factory calibration or validation tools for wireless chips.
+
+ Select this option ONLY for kernels that are specifically
+ built for such purposes.
+
+ Debugging tools that are supposed to end up in the hands of
+ users should better be implemented with debugfs.
+
+ Say N.
+
+config CFG80211_DEVELOPER_WARNINGS
+ bool "enable developer warnings"
+ depends on CFG80211
+ default n
+ help
+ This option enables some additional warnings that help
+ cfg80211 developers and driver developers, but that can
+ trigger due to races with userspace.
+
+ For example, when a driver reports that it was disconnected
+ from the AP, but the user disconnects manually at the same
+ time, the warning might trigger spuriously due to races.
+
+ Say Y only if you are developing cfg80211 or a driver based
+ on it (or mac80211).
+
config CFG80211_REG_DEBUG
bool "cfg80211 regulatory debugging"
@@ -8,9 +49,29 @@
default n
---help---
You can enable this if you want to debug regulatory changes.
+ For more information on cfg80211 regulatory refer to the wireless
+ wiki:
+
+ http://wireless.kernel.org/en/developers/Regulatory
If unsure, say N.
+config CFG80211_DEFAULT_PS
+ bool "enable powersave by default"
+ depends on CFG80211
+ default y
+ help
+ This option enables powersave mode by default.
+
+ If this causes your applications to misbehave you should fix your
+ applications instead -- they need to register their network
+ latency requirement, see Documentation/power/pm_qos_interface.txt.
+
+config CFG80211_DEFAULT_PS_VALUE
+ int
+ default 1 if CFG80211_DEFAULT_PS
+ default 0
+
config CFG80211_DEBUGFS
bool "cfg80211 DebugFS entries"
depends on CFG80211 && DEBUG_FS
@@ -35,19 +96,13 @@
config WIRELESS_EXT
bool "Wireless extensions"
- default n
+ default y
---help---
This option enables the legacy wireless extensions
(wireless network interface configuration via ioctls.)
- Wireless extensions will be replaced by cfg80211 and
- will be required only by legacy drivers that implement
- wireless extension handlers. This option does not
- affect the wireless-extension backward compatibility
- code in cfg80211.
-
- Say N (if you can) unless you know you need wireless
- extensions for external modules.
+ Say Y unless you've upgraded all your userspace to use
+ nl80211 instead of wireless extensions.
config WIRELESS_EXT_SYSFS
bool "Wireless extensions sysfs files"
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index f78c483..3ecaa91 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -5,8 +5,9 @@
obj-$(CONFIG_LIB80211_CRYPT_CCMP) += lib80211_crypt_ccmp.o
obj-$(CONFIG_LIB80211_CRYPT_TKIP) += lib80211_crypt_tkip.o
-cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o mlme.o ibss.o
+cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o
cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
-cfg80211-$(CONFIG_WIRELESS_EXT) += wext-compat.o
+cfg80211-$(CONFIG_WIRELESS_EXT) += wext-compat.o wext-sme.o
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
new file mode 100644
index 0000000..a46ac6c
--- /dev/null
+++ b/net/wireless/chan.c
@@ -0,0 +1,89 @@
+/*
+ * This file contains helper code to handle channel
+ * settings and keeping track of what is possible at
+ * any point in time.
+ *
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ */
+
+#include <net/cfg80211.h>
+#include "core.h"
+
+struct ieee80211_channel *
+rdev_fixed_channel(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *for_wdev)
+{
+ struct wireless_dev *wdev;
+ struct ieee80211_channel *result = NULL;
+
+ WARN_ON(!mutex_is_locked(&rdev->devlist_mtx));
+
+ list_for_each_entry(wdev, &rdev->netdev_list, list) {
+ if (wdev == for_wdev)
+ continue;
+
+ /*
+ * Lock manually to tell lockdep about allowed
+ * nesting here if for_wdev->mtx is held already.
+ * This is ok as it's all under the rdev devlist
+ * mutex and as such can only be done once at any
+ * given time.
+ */
+ mutex_lock_nested(&wdev->mtx, SINGLE_DEPTH_NESTING);
+ if (wdev->current_bss)
+ result = wdev->current_bss->pub.channel;
+ wdev_unlock(wdev);
+
+ if (result)
+ break;
+ }
+
+ return result;
+}
+
+int rdev_set_freq(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *for_wdev,
+ int freq, enum nl80211_channel_type channel_type)
+{
+ struct ieee80211_channel *chan;
+ struct ieee80211_sta_ht_cap *ht_cap;
+ int result;
+
+ if (rdev_fixed_channel(rdev, for_wdev))
+ return -EBUSY;
+
+ if (!rdev->ops->set_channel)
+ return -EOPNOTSUPP;
+
+ chan = ieee80211_get_channel(&rdev->wiphy, freq);
+
+ /* Primary channel not allowed */
+ if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
+ return -EINVAL;
+
+ if (channel_type == NL80211_CHAN_HT40MINUS &&
+ chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
+ return -EINVAL;
+ else if (channel_type == NL80211_CHAN_HT40PLUS &&
+ chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
+ return -EINVAL;
+
+ ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
+
+ if (channel_type != NL80211_CHAN_NO_HT) {
+ if (!ht_cap->ht_supported)
+ return -EINVAL;
+
+ if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
+ ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
+ return -EINVAL;
+ }
+
+ result = rdev->ops->set_channel(&rdev->wiphy, chan, channel_type);
+ if (result)
+ return result;
+
+ rdev->channel = chan;
+
+ return 0;
+}
diff --git a/net/wireless/core.c b/net/wireless/core.c
index d585029..45b2be3 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -12,6 +12,7 @@
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
+#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
@@ -19,6 +20,7 @@
#include "core.h"
#include "sysfs.h"
#include "debugfs.h"
+#include "wext-compat.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
@@ -30,12 +32,11 @@
/* RCU might be appropriate here since we usually
* only read the list, and that can happen quite
* often because we need to do it for each command */
-LIST_HEAD(cfg80211_drv_list);
+LIST_HEAD(cfg80211_rdev_list);
+int cfg80211_rdev_list_generation;
/*
- * This is used to protect the cfg80211_drv_list, cfg80211_regdomain,
- * country_ie_regdomain, the reg_beacon_list and the the last regulatory
- * request receipt (last_request).
+ * This is used to protect the cfg80211_rdev_list
*/
DEFINE_MUTEX(cfg80211_mutex);
@@ -43,18 +44,18 @@
static struct dentry *ieee80211_debugfs_dir;
/* requires cfg80211_mutex to be held! */
-struct cfg80211_registered_device *cfg80211_drv_by_wiphy_idx(int wiphy_idx)
+struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
{
- struct cfg80211_registered_device *result = NULL, *drv;
+ struct cfg80211_registered_device *result = NULL, *rdev;
if (!wiphy_idx_valid(wiphy_idx))
return NULL;
assert_cfg80211_lock();
- list_for_each_entry(drv, &cfg80211_drv_list, list) {
- if (drv->wiphy_idx == wiphy_idx) {
- result = drv;
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+ if (rdev->wiphy_idx == wiphy_idx) {
+ result = rdev;
break;
}
}
@@ -64,32 +65,32 @@
int get_wiphy_idx(struct wiphy *wiphy)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
if (!wiphy)
return WIPHY_IDX_STALE;
- drv = wiphy_to_dev(wiphy);
- return drv->wiphy_idx;
+ rdev = wiphy_to_dev(wiphy);
+ return rdev->wiphy_idx;
}
-/* requires cfg80211_drv_mutex to be held! */
+/* requires cfg80211_rdev_mutex to be held! */
struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
if (!wiphy_idx_valid(wiphy_idx))
return NULL;
assert_cfg80211_lock();
- drv = cfg80211_drv_by_wiphy_idx(wiphy_idx);
- if (!drv)
+ rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
+ if (!rdev)
return NULL;
- return &drv->wiphy;
+ return &rdev->wiphy;
}
/* requires cfg80211_mutex to be held! */
struct cfg80211_registered_device *
-__cfg80211_drv_from_info(struct genl_info *info)
+__cfg80211_rdev_from_info(struct genl_info *info)
{
int ifindex;
struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
@@ -99,14 +100,14 @@
assert_cfg80211_lock();
if (info->attrs[NL80211_ATTR_WIPHY]) {
- bywiphyidx = cfg80211_drv_by_wiphy_idx(
+ bywiphyidx = cfg80211_rdev_by_wiphy_idx(
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
err = -ENODEV;
}
if (info->attrs[NL80211_ATTR_IFINDEX]) {
ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
- dev = dev_get_by_index(&init_net, ifindex);
+ dev = dev_get_by_index(genl_info_net(info), ifindex);
if (dev) {
if (dev->ieee80211_ptr)
byifidx =
@@ -134,54 +135,48 @@
struct cfg80211_registered_device *
cfg80211_get_dev_from_info(struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
mutex_lock(&cfg80211_mutex);
- drv = __cfg80211_drv_from_info(info);
+ rdev = __cfg80211_rdev_from_info(info);
/* if it is not an error we grab the lock on
* it to assure it won't be going away while
* we operate on it */
- if (!IS_ERR(drv))
- mutex_lock(&drv->mtx);
+ if (!IS_ERR(rdev))
+ mutex_lock(&rdev->mtx);
mutex_unlock(&cfg80211_mutex);
- return drv;
+ return rdev;
}
struct cfg80211_registered_device *
-cfg80211_get_dev_from_ifindex(int ifindex)
+cfg80211_get_dev_from_ifindex(struct net *net, int ifindex)
{
- struct cfg80211_registered_device *drv = ERR_PTR(-ENODEV);
+ struct cfg80211_registered_device *rdev = ERR_PTR(-ENODEV);
struct net_device *dev;
mutex_lock(&cfg80211_mutex);
- dev = dev_get_by_index(&init_net, ifindex);
+ dev = dev_get_by_index(net, ifindex);
if (!dev)
goto out;
if (dev->ieee80211_ptr) {
- drv = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
- mutex_lock(&drv->mtx);
+ rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
+ mutex_lock(&rdev->mtx);
} else
- drv = ERR_PTR(-ENODEV);
+ rdev = ERR_PTR(-ENODEV);
dev_put(dev);
out:
mutex_unlock(&cfg80211_mutex);
- return drv;
-}
-
-void cfg80211_put_dev(struct cfg80211_registered_device *drv)
-{
- BUG_ON(IS_ERR(drv));
- mutex_unlock(&drv->mtx);
+ return rdev;
}
/* requires cfg80211_mutex to be held */
int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev2;
int wiphy_idx, taken = -1, result, digits;
assert_cfg80211_lock();
@@ -207,8 +202,8 @@
return 0;
/* Ensure another device does not already have this name. */
- list_for_each_entry(drv, &cfg80211_drv_list, list)
- if (strcmp(newname, dev_name(&drv->wiphy.dev)) == 0)
+ list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
+ if (strcmp(newname, dev_name(&rdev2->wiphy.dev)) == 0)
return -EINVAL;
result = device_rename(&rdev->wiphy.dev, newname);
@@ -228,28 +223,64 @@
return 0;
}
+int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
+ struct net *net)
+{
+ struct wireless_dev *wdev;
+ int err = 0;
+
+ if (!rdev->wiphy.netnsok)
+ return -EOPNOTSUPP;
+
+ list_for_each_entry(wdev, &rdev->netdev_list, list) {
+ wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
+ err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
+ if (err)
+ break;
+ wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
+ }
+
+ if (err) {
+ /* failed -- clean up to old netns */
+ net = wiphy_net(&rdev->wiphy);
+
+ list_for_each_entry_continue_reverse(wdev, &rdev->netdev_list,
+ list) {
+ wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
+ err = dev_change_net_namespace(wdev->netdev, net,
+ "wlan%d");
+ WARN_ON(err);
+ wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
+ }
+ }
+
+ wiphy_net_set(&rdev->wiphy, net);
+
+ return err;
+}
+
static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
{
- struct cfg80211_registered_device *drv = data;
+ struct cfg80211_registered_device *rdev = data;
- drv->ops->rfkill_poll(&drv->wiphy);
+ rdev->ops->rfkill_poll(&rdev->wiphy);
}
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
- struct cfg80211_registered_device *drv = data;
+ struct cfg80211_registered_device *rdev = data;
struct wireless_dev *wdev;
if (!blocked)
return 0;
rtnl_lock();
- mutex_lock(&drv->devlist_mtx);
+ mutex_lock(&rdev->devlist_mtx);
- list_for_each_entry(wdev, &drv->netdev_list, list)
+ list_for_each_entry(wdev, &rdev->netdev_list, list)
dev_close(wdev->netdev);
- mutex_unlock(&drv->devlist_mtx);
+ mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
return 0;
@@ -257,10 +288,25 @@
static void cfg80211_rfkill_sync_work(struct work_struct *work)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
- drv = container_of(work, struct cfg80211_registered_device, rfkill_sync);
- cfg80211_rfkill_set_block(drv, rfkill_blocked(drv->rfkill));
+ rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync);
+ cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill));
+}
+
+static void cfg80211_event_work(struct work_struct *work)
+{
+ struct cfg80211_registered_device *rdev;
+
+ rdev = container_of(work, struct cfg80211_registered_device,
+ event_work);
+
+ rtnl_lock();
+ cfg80211_lock_rdev(rdev);
+
+ cfg80211_process_rdev_events(rdev);
+ cfg80211_unlock_rdev(rdev);
+ rtnl_unlock();
}
/* exported functions */
@@ -269,76 +315,90 @@
{
static int wiphy_counter;
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int alloc_size;
- WARN_ON(!ops->add_key && ops->del_key);
- WARN_ON(ops->add_key && !ops->del_key);
+ WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
+ WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
+ WARN_ON(ops->connect && !ops->disconnect);
+ WARN_ON(ops->join_ibss && !ops->leave_ibss);
+ WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
+ WARN_ON(ops->add_station && !ops->del_station);
+ WARN_ON(ops->add_mpath && !ops->del_mpath);
- alloc_size = sizeof(*drv) + sizeof_priv;
+ alloc_size = sizeof(*rdev) + sizeof_priv;
- drv = kzalloc(alloc_size, GFP_KERNEL);
- if (!drv)
+ rdev = kzalloc(alloc_size, GFP_KERNEL);
+ if (!rdev)
return NULL;
- drv->ops = ops;
+ rdev->ops = ops;
mutex_lock(&cfg80211_mutex);
- drv->wiphy_idx = wiphy_counter++;
+ rdev->wiphy_idx = wiphy_counter++;
- if (unlikely(!wiphy_idx_valid(drv->wiphy_idx))) {
+ if (unlikely(!wiphy_idx_valid(rdev->wiphy_idx))) {
wiphy_counter--;
mutex_unlock(&cfg80211_mutex);
/* ugh, wrapped! */
- kfree(drv);
+ kfree(rdev);
return NULL;
}
mutex_unlock(&cfg80211_mutex);
/* give it a proper name */
- dev_set_name(&drv->wiphy.dev, PHY_NAME "%d", drv->wiphy_idx);
+ dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
- mutex_init(&drv->mtx);
- mutex_init(&drv->devlist_mtx);
- INIT_LIST_HEAD(&drv->netdev_list);
- spin_lock_init(&drv->bss_lock);
- INIT_LIST_HEAD(&drv->bss_list);
+ mutex_init(&rdev->mtx);
+ mutex_init(&rdev->devlist_mtx);
+ INIT_LIST_HEAD(&rdev->netdev_list);
+ spin_lock_init(&rdev->bss_lock);
+ INIT_LIST_HEAD(&rdev->bss_list);
+ INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
- device_initialize(&drv->wiphy.dev);
- drv->wiphy.dev.class = &ieee80211_class;
- drv->wiphy.dev.platform_data = drv;
+ device_initialize(&rdev->wiphy.dev);
+ rdev->wiphy.dev.class = &ieee80211_class;
+ rdev->wiphy.dev.platform_data = rdev;
- drv->rfkill_ops.set_block = cfg80211_rfkill_set_block;
- drv->rfkill = rfkill_alloc(dev_name(&drv->wiphy.dev),
- &drv->wiphy.dev, RFKILL_TYPE_WLAN,
- &drv->rfkill_ops, drv);
+ rdev->wiphy.ps_default = CONFIG_CFG80211_DEFAULT_PS_VALUE;
- if (!drv->rfkill) {
- kfree(drv);
+ wiphy_net_set(&rdev->wiphy, &init_net);
+
+ rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
+ rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
+ &rdev->wiphy.dev, RFKILL_TYPE_WLAN,
+ &rdev->rfkill_ops, rdev);
+
+ if (!rdev->rfkill) {
+ kfree(rdev);
return NULL;
}
- INIT_WORK(&drv->rfkill_sync, cfg80211_rfkill_sync_work);
+ INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work);
+ INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
+ INIT_WORK(&rdev->event_work, cfg80211_event_work);
+
+ init_waitqueue_head(&rdev->dev_wait);
/*
* Initialize wiphy parameters to IEEE 802.11 MIB default values.
* Fragmentation and RTS threshold are disabled by default with the
* special -1 value.
*/
- drv->wiphy.retry_short = 7;
- drv->wiphy.retry_long = 4;
- drv->wiphy.frag_threshold = (u32) -1;
- drv->wiphy.rts_threshold = (u32) -1;
+ rdev->wiphy.retry_short = 7;
+ rdev->wiphy.retry_long = 4;
+ rdev->wiphy.frag_threshold = (u32) -1;
+ rdev->wiphy.rts_threshold = (u32) -1;
- return &drv->wiphy;
+ return &rdev->wiphy;
}
EXPORT_SYMBOL(wiphy_new);
int wiphy_register(struct wiphy *wiphy)
{
- struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
int res;
enum ieee80211_band band;
struct ieee80211_supported_band *sband;
@@ -346,9 +406,6 @@
int i;
u16 ifmodes = wiphy->interface_modes;
- if (WARN_ON(wiphy->max_scan_ssids < 1))
- return -EINVAL;
-
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
@@ -395,11 +452,11 @@
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
- res = device_add(&drv->wiphy.dev);
+ res = device_add(&rdev->wiphy.dev);
if (res)
return res;
- res = rfkill_register(drv->rfkill);
+ res = rfkill_register(rdev->rfkill);
if (res)
goto out_rm_dev;
@@ -408,16 +465,17 @@
/* set up regulatory info */
wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
- list_add(&drv->list, &cfg80211_drv_list);
+ list_add(&rdev->list, &cfg80211_rdev_list);
+ cfg80211_rdev_list_generation++;
mutex_unlock(&cfg80211_mutex);
/* add to debugfs */
- drv->wiphy.debugfsdir =
- debugfs_create_dir(wiphy_name(&drv->wiphy),
+ rdev->wiphy.debugfsdir =
+ debugfs_create_dir(wiphy_name(&rdev->wiphy),
ieee80211_debugfs_dir);
- if (IS_ERR(drv->wiphy.debugfsdir))
- drv->wiphy.debugfsdir = NULL;
+ if (IS_ERR(rdev->wiphy.debugfsdir))
+ rdev->wiphy.debugfsdir = NULL;
if (wiphy->custom_regulatory) {
struct regulatory_request request;
@@ -430,83 +488,101 @@
nl80211_send_reg_change_event(&request);
}
- cfg80211_debugfs_drv_add(drv);
+ cfg80211_debugfs_rdev_add(rdev);
return 0;
out_rm_dev:
- device_del(&drv->wiphy.dev);
+ device_del(&rdev->wiphy.dev);
return res;
}
EXPORT_SYMBOL(wiphy_register);
void wiphy_rfkill_start_polling(struct wiphy *wiphy)
{
- struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- if (!drv->ops->rfkill_poll)
+ if (!rdev->ops->rfkill_poll)
return;
- drv->rfkill_ops.poll = cfg80211_rfkill_poll;
- rfkill_resume_polling(drv->rfkill);
+ rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
+ rfkill_resume_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_start_polling);
void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
{
- struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- rfkill_pause_polling(drv->rfkill);
+ rfkill_pause_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
void wiphy_unregister(struct wiphy *wiphy)
{
- struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- rfkill_unregister(drv->rfkill);
+ rfkill_unregister(rdev->rfkill);
/* protect the device list */
mutex_lock(&cfg80211_mutex);
- BUG_ON(!list_empty(&drv->netdev_list));
+ wait_event(rdev->dev_wait, ({
+ int __count;
+ mutex_lock(&rdev->devlist_mtx);
+ __count = rdev->opencount;
+ mutex_unlock(&rdev->devlist_mtx);
+ __count == 0;}));
+
+ mutex_lock(&rdev->devlist_mtx);
+ BUG_ON(!list_empty(&rdev->netdev_list));
+ mutex_unlock(&rdev->devlist_mtx);
/*
- * Try to grab drv->mtx. If a command is still in progress,
+ * First remove the hardware from everywhere, this makes
+ * it impossible to find from userspace.
+ */
+ cfg80211_debugfs_rdev_del(rdev);
+ list_del(&rdev->list);
+
+ /*
+ * Try to grab rdev->mtx. If a command is still in progress,
* hopefully the driver will refuse it since it's tearing
* down the device already. We wait for this command to complete
* before unlinking the item from the list.
* Note: as codified by the BUG_ON above we cannot get here if
- * a virtual interface is still associated. Hence, we can only
- * get to lock contention here if userspace issues a command
- * that identified the hardware by wiphy index.
+ * a virtual interface is still present. Hence, we can only get
+ * to lock contention here if userspace issues a command that
+ * identified the hardware by wiphy index.
*/
- mutex_lock(&drv->mtx);
- /* unlock again before freeing */
- mutex_unlock(&drv->mtx);
-
- cfg80211_debugfs_drv_del(drv);
+ cfg80211_lock_rdev(rdev);
+ /* nothing */
+ cfg80211_unlock_rdev(rdev);
/* If this device got a regulatory hint tell core its
* free to listen now to a new shiny device regulatory hint */
reg_device_remove(wiphy);
- list_del(&drv->list);
- device_del(&drv->wiphy.dev);
- debugfs_remove(drv->wiphy.debugfsdir);
+ cfg80211_rdev_list_generation++;
+ device_del(&rdev->wiphy.dev);
+ debugfs_remove(rdev->wiphy.debugfsdir);
mutex_unlock(&cfg80211_mutex);
+
+ flush_work(&rdev->scan_done_wk);
+ cancel_work_sync(&rdev->conn_work);
+ flush_work(&rdev->event_work);
}
EXPORT_SYMBOL(wiphy_unregister);
-void cfg80211_dev_free(struct cfg80211_registered_device *drv)
+void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
{
struct cfg80211_internal_bss *scan, *tmp;
- rfkill_destroy(drv->rfkill);
- mutex_destroy(&drv->mtx);
- mutex_destroy(&drv->devlist_mtx);
- list_for_each_entry_safe(scan, tmp, &drv->bss_list, list)
+ rfkill_destroy(rdev->rfkill);
+ mutex_destroy(&rdev->mtx);
+ mutex_destroy(&rdev->devlist_mtx);
+ list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
cfg80211_put_bss(&scan->pub);
- kfree(drv);
+ kfree(rdev);
}
void wiphy_free(struct wiphy *wiphy)
@@ -517,68 +593,181 @@
void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
{
- struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- if (rfkill_set_hw_state(drv->rfkill, blocked))
- schedule_work(&drv->rfkill_sync);
+ if (rfkill_set_hw_state(rdev->rfkill, blocked))
+ schedule_work(&rdev->rfkill_sync);
}
EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
+static void wdev_cleanup_work(struct work_struct *work)
+{
+ struct wireless_dev *wdev;
+ struct cfg80211_registered_device *rdev;
+
+ wdev = container_of(work, struct wireless_dev, cleanup_work);
+ rdev = wiphy_to_dev(wdev->wiphy);
+
+ cfg80211_lock_rdev(rdev);
+
+ if (WARN_ON(rdev->scan_req && rdev->scan_req->dev == wdev->netdev)) {
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, true);
+ }
+
+ cfg80211_unlock_rdev(rdev);
+
+ mutex_lock(&rdev->devlist_mtx);
+ rdev->opencount--;
+ mutex_unlock(&rdev->devlist_mtx);
+ wake_up(&rdev->dev_wait);
+
+ dev_put(wdev->netdev);
+}
+
static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
unsigned long state,
void *ndev)
{
struct net_device *dev = ndev;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
- if (!dev->ieee80211_ptr)
+ if (!wdev)
return NOTIFY_DONE;
- rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
+ rdev = wiphy_to_dev(wdev->wiphy);
- WARN_ON(dev->ieee80211_ptr->iftype == NL80211_IFTYPE_UNSPECIFIED);
+ WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
switch (state) {
case NETDEV_REGISTER:
+ /*
+ * NB: cannot take rdev->mtx here because this may be
+ * called within code protected by it when interfaces
+ * are added with nl80211.
+ */
+ mutex_init(&wdev->mtx);
+ INIT_WORK(&wdev->cleanup_work, wdev_cleanup_work);
+ INIT_LIST_HEAD(&wdev->event_list);
+ spin_lock_init(&wdev->event_lock);
mutex_lock(&rdev->devlist_mtx);
- list_add(&dev->ieee80211_ptr->list, &rdev->netdev_list);
+ list_add(&wdev->list, &rdev->netdev_list);
+ rdev->devlist_generation++;
+ /* can only change netns with wiphy */
+ dev->features |= NETIF_F_NETNS_LOCAL;
+
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
printk(KERN_ERR "wireless: failed to add phy80211 "
"symlink to netdev!\n");
}
- dev->ieee80211_ptr->netdev = dev;
-#ifdef CONFIG_WIRELESS_EXT
- dev->ieee80211_ptr->wext.default_key = -1;
- dev->ieee80211_ptr->wext.default_mgmt_key = -1;
-#endif
+ wdev->netdev = dev;
+ wdev->sme_state = CFG80211_SME_IDLE;
mutex_unlock(&rdev->devlist_mtx);
+#ifdef CONFIG_WIRELESS_EXT
+ if (!dev->wireless_handlers)
+ dev->wireless_handlers = &cfg80211_wext_handler;
+ wdev->wext.default_key = -1;
+ wdev->wext.default_mgmt_key = -1;
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+ wdev->wext.ps = wdev->wiphy->ps_default;
+ wdev->wext.ps_timeout = 100;
+ if (rdev->ops->set_power_mgmt)
+ if (rdev->ops->set_power_mgmt(wdev->wiphy, dev,
+ wdev->wext.ps,
+ wdev->wext.ps_timeout)) {
+ /* assume this means it's off */
+ wdev->wext.ps = false;
+ }
+#endif
break;
case NETDEV_GOING_DOWN:
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ cfg80211_leave_ibss(rdev, dev, true);
break;
- if (!dev->ieee80211_ptr->ssid_len)
+ case NL80211_IFTYPE_STATION:
+ wdev_lock(wdev);
+#ifdef CONFIG_WIRELESS_EXT
+ kfree(wdev->wext.ie);
+ wdev->wext.ie = NULL;
+ wdev->wext.ie_len = 0;
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+#endif
+ __cfg80211_disconnect(rdev, dev,
+ WLAN_REASON_DEAUTH_LEAVING, true);
+ cfg80211_mlme_down(rdev, dev);
+ wdev_unlock(wdev);
break;
- cfg80211_leave_ibss(rdev, dev, true);
+ default:
+ break;
+ }
+ break;
+ case NETDEV_DOWN:
+ dev_hold(dev);
+ schedule_work(&wdev->cleanup_work);
break;
case NETDEV_UP:
+ /*
+ * If we have a really quick DOWN/UP succession we may
+ * have this work still pending ... cancel it and see
+ * if it was pending, in which case we need to account
+ * for some of the work it would have done.
+ */
+ if (cancel_work_sync(&wdev->cleanup_work)) {
+ mutex_lock(&rdev->devlist_mtx);
+ rdev->opencount--;
+ mutex_unlock(&rdev->devlist_mtx);
+ dev_put(dev);
+ }
#ifdef CONFIG_WIRELESS_EXT
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
- break;
- if (!dev->ieee80211_ptr->wext.ibss.ssid_len)
- break;
- cfg80211_join_ibss(rdev, dev, &dev->ieee80211_ptr->wext.ibss);
- break;
-#endif
- case NETDEV_UNREGISTER:
+ cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
- if (!list_empty(&dev->ieee80211_ptr->list)) {
+ wdev_lock(wdev);
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ cfg80211_ibss_wext_join(rdev, wdev);
+ break;
+ case NL80211_IFTYPE_STATION:
+ cfg80211_mgd_wext_connect(rdev, wdev);
+ break;
+ default:
+ break;
+ }
+ wdev_unlock(wdev);
+ rdev->opencount++;
+ mutex_unlock(&rdev->devlist_mtx);
+ cfg80211_unlock_rdev(rdev);
+#endif
+ break;
+ case NETDEV_UNREGISTER:
+ /*
+ * NB: cannot take rdev->mtx here because this may be
+ * called within code protected by it when interfaces
+ * are removed with nl80211.
+ */
+ mutex_lock(&rdev->devlist_mtx);
+ /*
+ * It is possible to get NETDEV_UNREGISTER
+ * multiple times. To detect that, check
+ * that the interface is still on the list
+ * of registered interfaces, and only then
+ * remove and clean it up.
+ */
+ if (!list_empty(&wdev->list)) {
sysfs_remove_link(&dev->dev.kobj, "phy80211");
- list_del_init(&dev->ieee80211_ptr->list);
+ list_del_init(&wdev->list);
+ rdev->devlist_generation++;
+#ifdef CONFIG_WIRELESS_EXT
+ kfree(wdev->wext.keys);
+#endif
}
mutex_unlock(&rdev->devlist_mtx);
break;
case NETDEV_PRE_UP:
+ if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
+ return notifier_from_errno(-EOPNOTSUPP);
if (rfkill_blocked(rdev->rfkill))
return notifier_from_errno(-ERFKILL);
break;
@@ -591,10 +780,32 @@
.notifier_call = cfg80211_netdev_notifier_call,
};
-static int cfg80211_init(void)
+static void __net_exit cfg80211_pernet_exit(struct net *net)
+{
+ struct cfg80211_registered_device *rdev;
+
+ rtnl_lock();
+ mutex_lock(&cfg80211_mutex);
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+ if (net_eq(wiphy_net(&rdev->wiphy), net))
+ WARN_ON(cfg80211_switch_netns(rdev, &init_net));
+ }
+ mutex_unlock(&cfg80211_mutex);
+ rtnl_unlock();
+}
+
+static struct pernet_operations cfg80211_pernet_ops = {
+ .exit = cfg80211_pernet_exit,
+};
+
+static int __init cfg80211_init(void)
{
int err;
+ err = register_pernet_device(&cfg80211_pernet_ops);
+ if (err)
+ goto out_fail_pernet;
+
err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
@@ -622,9 +833,10 @@
out_fail_notifier:
wiphy_sysfs_exit();
out_fail_sysfs:
+ unregister_pernet_device(&cfg80211_pernet_ops);
+out_fail_pernet:
return err;
}
-
subsys_initcall(cfg80211_init);
static void cfg80211_exit(void)
@@ -634,5 +846,6 @@
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
regulatory_exit();
+ unregister_pernet_device(&cfg80211_pernet_ops);
}
module_exit(cfg80211_exit);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index bfa340c..2a33d8b 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -49,6 +49,9 @@
/* associate netdev list */
struct mutex devlist_mtx;
struct list_head netdev_list;
+ int devlist_generation;
+ int opencount; /* also protected by devlist_mtx */
+ wait_queue_head_t dev_wait;
/* BSSes/scanning */
spinlock_t bss_lock;
@@ -57,6 +60,17 @@
u32 bss_generation;
struct cfg80211_scan_request *scan_req; /* protected by RTNL */
unsigned long suspend_at;
+ struct work_struct scan_done_wk;
+
+#ifdef CONFIG_NL80211_TESTMODE
+ struct genl_info *testmode_info;
+#endif
+
+ struct work_struct conn_work;
+ struct work_struct event_work;
+
+ /* current channel */
+ struct ieee80211_channel *channel;
#ifdef CONFIG_CFG80211_DEBUGFS
/* Debugfs entries */
@@ -89,13 +103,14 @@
}
extern struct mutex cfg80211_mutex;
-extern struct list_head cfg80211_drv_list;
+extern struct list_head cfg80211_rdev_list;
+extern int cfg80211_rdev_list_generation;
#define assert_cfg80211_lock() WARN_ON(!mutex_is_locked(&cfg80211_mutex))
/*
* You can use this to mark a wiphy_idx as not having an associated wiphy.
- * It guarantees cfg80211_drv_by_wiphy_idx(wiphy_idx) will return NULL
+ * It guarantees cfg80211_rdev_by_wiphy_idx(wiphy_idx) will return NULL
*/
#define WIPHY_IDX_STALE -1
@@ -104,17 +119,40 @@
struct rb_node rbn;
unsigned long ts;
struct kref ref;
- bool hold, ies_allocated;
+ atomic_t hold;
+ bool ies_allocated;
/* must be last because of priv member */
struct cfg80211_bss pub;
};
-struct cfg80211_registered_device *cfg80211_drv_by_wiphy_idx(int wiphy_idx);
+static inline struct cfg80211_internal_bss *bss_from_pub(struct cfg80211_bss *pub)
+{
+ return container_of(pub, struct cfg80211_internal_bss, pub);
+}
+
+static inline void cfg80211_ref_bss(struct cfg80211_internal_bss *bss)
+{
+ kref_get(&bss->ref);
+}
+
+static inline void cfg80211_hold_bss(struct cfg80211_internal_bss *bss)
+{
+ atomic_inc(&bss->hold);
+}
+
+static inline void cfg80211_unhold_bss(struct cfg80211_internal_bss *bss)
+{
+ int r = atomic_dec_return(&bss->hold);
+ WARN_ON(r < 0);
+}
+
+
+struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx);
int get_wiphy_idx(struct wiphy *wiphy);
struct cfg80211_registered_device *
-__cfg80211_drv_from_info(struct genl_info *info);
+__cfg80211_rdev_from_info(struct genl_info *info);
/*
* This function returns a pointer to the driver
@@ -122,12 +160,12 @@
* If successful, it returns non-NULL and also locks
* the driver's mutex!
*
- * This means that you need to call cfg80211_put_dev()
+ * This means that you need to call cfg80211_unlock_rdev()
* before being allowed to acquire &cfg80211_mutex!
*
* This is necessary because we need to lock the global
* mutex to get an item off the list safely, and then
- * we lock the drv mutex so it doesn't go away under us.
+ * we lock the rdev mutex so it doesn't go away under us.
*
* We don't want to keep cfg80211_mutex locked
* for all the time in order to allow requests on
@@ -139,19 +177,93 @@
extern struct cfg80211_registered_device *
cfg80211_get_dev_from_info(struct genl_info *info);
-/* requires cfg80211_drv_mutex to be held! */
+/* requires cfg80211_rdev_mutex to be held! */
struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx);
/* identical to cfg80211_get_dev_from_info but only operate on ifindex */
extern struct cfg80211_registered_device *
-cfg80211_get_dev_from_ifindex(int ifindex);
+cfg80211_get_dev_from_ifindex(struct net *net, int ifindex);
-extern void cfg80211_put_dev(struct cfg80211_registered_device *drv);
+int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
+ struct net *net);
+
+static inline void cfg80211_lock_rdev(struct cfg80211_registered_device *rdev)
+{
+ mutex_lock(&rdev->mtx);
+}
+
+static inline void cfg80211_unlock_rdev(struct cfg80211_registered_device *rdev)
+{
+ BUG_ON(IS_ERR(rdev) || !rdev);
+ mutex_unlock(&rdev->mtx);
+}
+
+static inline void wdev_lock(struct wireless_dev *wdev)
+ __acquires(wdev)
+{
+ mutex_lock(&wdev->mtx);
+ __acquire(wdev->mtx);
+}
+
+static inline void wdev_unlock(struct wireless_dev *wdev)
+ __releases(wdev)
+{
+ __release(wdev->mtx);
+ mutex_unlock(&wdev->mtx);
+}
+
+#define ASSERT_RDEV_LOCK(rdev) WARN_ON(!mutex_is_locked(&(rdev)->mtx));
+#define ASSERT_WDEV_LOCK(wdev) WARN_ON(!mutex_is_locked(&(wdev)->mtx));
+
+enum cfg80211_event_type {
+ EVENT_CONNECT_RESULT,
+ EVENT_ROAMED,
+ EVENT_DISCONNECTED,
+ EVENT_IBSS_JOINED,
+};
+
+struct cfg80211_event {
+ struct list_head list;
+ enum cfg80211_event_type type;
+
+ union {
+ struct {
+ u8 bssid[ETH_ALEN];
+ const u8 *req_ie;
+ const u8 *resp_ie;
+ size_t req_ie_len;
+ size_t resp_ie_len;
+ u16 status;
+ } cr;
+ struct {
+ u8 bssid[ETH_ALEN];
+ const u8 *req_ie;
+ const u8 *resp_ie;
+ size_t req_ie_len;
+ size_t resp_ie_len;
+ } rm;
+ struct {
+ const u8 *ie;
+ size_t ie_len;
+ u16 reason;
+ } dc;
+ struct {
+ u8 bssid[ETH_ALEN];
+ } ij;
+ };
+};
+
+struct cfg80211_cached_keys {
+ struct key_params params[6];
+ u8 data[6][WLAN_MAX_KEY_LEN];
+ int def, defmgmt;
+};
+
/* free object */
-extern void cfg80211_dev_free(struct cfg80211_registered_device *drv);
+extern void cfg80211_dev_free(struct cfg80211_registered_device *rdev);
-extern int cfg80211_dev_rename(struct cfg80211_registered_device *drv,
+extern int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname);
void ieee80211_set_bitrate_flags(struct wiphy *wiphy);
@@ -163,15 +275,124 @@
unsigned long age_secs);
/* IBSS */
+int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_ibss_params *params,
+ struct cfg80211_cached_keys *connkeys);
int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- struct cfg80211_ibss_params *params);
+ struct cfg80211_ibss_params *params,
+ struct cfg80211_cached_keys *connkeys);
void cfg80211_clear_ibss(struct net_device *dev, bool nowext);
int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
struct net_device *dev, bool nowext);
+void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid);
+int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
+/* MLME */
+int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_auth_type auth_type,
+ const u8 *bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len,
+ const u8 *key, int key_len, int key_idx);
+int cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, struct ieee80211_channel *chan,
+ enum nl80211_auth_type auth_type, const u8 *bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len,
+ const u8 *key, int key_len, int key_idx);
+int __cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ const u8 *bssid, const u8 *prev_bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len, bool use_mfp,
+ struct cfg80211_crypto_settings *crypt);
+int cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, struct ieee80211_channel *chan,
+ const u8 *bssid, const u8 *prev_bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len, bool use_mfp,
+ struct cfg80211_crypto_settings *crypt);
+int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason);
+int cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason);
+int cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason);
+void cfg80211_mlme_down(struct cfg80211_registered_device *rdev,
+ struct net_device *dev);
+void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len,
+ u16 status, bool wextev,
+ struct cfg80211_bss *bss);
+
+/* SME */
+int __cfg80211_connect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_connect_params *connect,
+ struct cfg80211_cached_keys *connkeys,
+ const u8 *prev_bssid);
+int cfg80211_connect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_connect_params *connect,
+ struct cfg80211_cached_keys *connkeys);
+int __cfg80211_disconnect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, u16 reason,
+ bool wextev);
+int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, u16 reason,
+ bool wextev);
+void __cfg80211_roamed(struct wireless_dev *wdev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len);
+int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
+void cfg80211_conn_work(struct work_struct *work);
+bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev);
/* internal helpers */
-int cfg80211_validate_key_settings(struct key_params *params, int key_idx,
+int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
+ struct key_params *params, int key_idx,
const u8 *mac_addr);
+void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
+ size_t ie_len, u16 reason, bool from_ap);
+void cfg80211_sme_scan_done(struct net_device *dev);
+void cfg80211_sme_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
+void cfg80211_sme_disassoc(struct net_device *dev, int idx);
+void __cfg80211_scan_done(struct work_struct *wk);
+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak);
+void cfg80211_upload_connect_keys(struct wireless_dev *wdev);
+int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, enum nl80211_iftype ntype,
+ u32 *flags, struct vif_params *params);
+void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev);
+
+struct ieee80211_channel *
+rdev_fixed_channel(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *for_wdev);
+int rdev_set_freq(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *for_wdev,
+ int freq, enum nl80211_channel_type channel_type);
+
+#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
+#define CFG80211_DEV_WARN_ON(cond) WARN_ON(cond)
+#else
+/*
+ * Trick to enable using it as a condition,
+ * and also not give a warning when it's
+ * not used that way.
+ */
+#define CFG80211_DEV_WARN_ON(cond) ({bool __r = (cond); __r; })
+#endif
#endif /* __NET_WIRELESS_CORE_H */
diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
index 679ddfc..13d93d8 100644
--- a/net/wireless/debugfs.c
+++ b/net/wireless/debugfs.c
@@ -104,15 +104,15 @@
};
#define DEBUGFS_ADD(name) \
- drv->debugfs.name = debugfs_create_file(#name, S_IRUGO, phyd, \
- &drv->wiphy, &name## _ops);
+ rdev->debugfs.name = debugfs_create_file(#name, S_IRUGO, phyd, \
+ &rdev->wiphy, &name## _ops);
#define DEBUGFS_DEL(name) \
- debugfs_remove(drv->debugfs.name); \
- drv->debugfs.name = NULL;
+ debugfs_remove(rdev->debugfs.name); \
+ rdev->debugfs.name = NULL;
-void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv)
+void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev)
{
- struct dentry *phyd = drv->wiphy.debugfsdir;
+ struct dentry *phyd = rdev->wiphy.debugfsdir;
DEBUGFS_ADD(rts_threshold);
DEBUGFS_ADD(fragmentation_threshold);
@@ -121,7 +121,7 @@
DEBUGFS_ADD(ht40allow_map);
}
-void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv)
+void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev)
{
DEBUGFS_DEL(rts_threshold);
DEBUGFS_DEL(fragmentation_threshold);
diff --git a/net/wireless/debugfs.h b/net/wireless/debugfs.h
index c226983..6419b6d 100644
--- a/net/wireless/debugfs.h
+++ b/net/wireless/debugfs.h
@@ -2,13 +2,13 @@
#define __CFG80211_DEBUGFS_H
#ifdef CONFIG_CFG80211_DEBUGFS
-void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv);
-void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv);
+void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev);
+void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev);
#else
static inline
-void cfg80211_debugfs_drv_add(struct cfg80211_registered_device *drv) {}
+void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev) {}
static inline
-void cfg80211_debugfs_drv_del(struct cfg80211_registered_device *drv) {}
+void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev) {}
#endif
#endif /* __CFG80211_DEBUGFS_H */
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index a4a1c34..c883389 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -7,10 +7,11 @@
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/cfg80211.h>
+#include "wext-compat.h"
#include "nl80211.h"
-void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp)
+void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_bss *bss;
@@ -21,10 +22,7 @@
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return;
- if (WARN_ON(!wdev->ssid_len))
- return;
-
- if (memcmp(bssid, wdev->bssid, ETH_ALEN) == 0)
+ if (!wdev->ssid_len)
return;
bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
@@ -36,39 +34,76 @@
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
- cfg80211_put_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
}
- cfg80211_hold_bss(bss);
- wdev->current_bss = bss;
- memcpy(wdev->bssid, bssid, ETH_ALEN);
+ cfg80211_hold_bss(bss_from_pub(bss));
+ wdev->current_bss = bss_from_pub(bss);
- nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid, gfp);
+ cfg80211_upload_connect_keys(wdev);
+
+ nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
+ GFP_KERNEL);
#ifdef CONFIG_WIRELESS_EXT
memset(&wrqu, 0, sizeof(wrqu));
memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
#endif
}
-EXPORT_SYMBOL(cfg80211_ibss_joined);
-int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
- struct net_device *dev,
- struct cfg80211_ibss_params *params)
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_event *ev;
+ unsigned long flags;
+
+ CFG80211_DEV_WARN_ON(!wdev->ssid_len);
+
+ ev = kzalloc(sizeof(*ev), gfp);
+ if (!ev)
+ return;
+
+ ev->type = EVENT_IBSS_JOINED;
+ memcpy(ev->cr.bssid, bssid, ETH_ALEN);
+
+ spin_lock_irqsave(&wdev->event_lock, flags);
+ list_add_tail(&ev->list, &wdev->event_list);
+ spin_unlock_irqrestore(&wdev->event_lock, flags);
+ schedule_work(&rdev->event_work);
+}
+EXPORT_SYMBOL(cfg80211_ibss_joined);
+
+int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_ibss_params *params,
+ struct cfg80211_cached_keys *connkeys)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct ieee80211_channel *chan;
int err;
+ ASSERT_WDEV_LOCK(wdev);
+
+ chan = rdev_fixed_channel(rdev, wdev);
+ if (chan && chan != params->channel)
+ return -EBUSY;
+
if (wdev->ssid_len)
return -EALREADY;
+ if (WARN_ON(wdev->connect_keys))
+ kfree(wdev->connect_keys);
+ wdev->connect_keys = connkeys;
+
#ifdef CONFIG_WIRELESS_EXT
wdev->wext.ibss.channel = params->channel;
#endif
err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
-
- if (err)
+ if (err) {
+ wdev->connect_keys = NULL;
return err;
+ }
memcpy(wdev->ssid, params->ssid, params->ssid_len);
wdev->ssid_len = params->ssid_len;
@@ -76,45 +111,107 @@
return 0;
}
-void cfg80211_clear_ibss(struct net_device *dev, bool nowext)
+int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_ibss_params *params,
+ struct cfg80211_cached_keys *connkeys)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+ err = __cfg80211_join_ibss(rdev, dev, params, connkeys);
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return err;
+}
+
+static void __cfg80211_clear_ibss(struct net_device *dev, bool nowext)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ int i;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ kfree(wdev->connect_keys);
+ wdev->connect_keys = NULL;
+
+ /*
+ * Delete all the keys ... pairwise keys can't really
+ * exist any more anyway, but default keys might.
+ */
+ if (rdev->ops->del_key)
+ for (i = 0; i < 6; i++)
+ rdev->ops->del_key(wdev->wiphy, dev, i, NULL);
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
- cfg80211_put_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
}
wdev->current_bss = NULL;
wdev->ssid_len = 0;
- memset(wdev->bssid, 0, ETH_ALEN);
#ifdef CONFIG_WIRELESS_EXT
if (!nowext)
wdev->wext.ibss.ssid_len = 0;
#endif
}
-int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
- struct net_device *dev, bool nowext)
+void cfg80211_clear_ibss(struct net_device *dev, bool nowext)
{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ wdev_lock(wdev);
+ __cfg80211_clear_ibss(dev, nowext);
+ wdev_unlock(wdev);
+}
+
+static int __cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, bool nowext)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (!wdev->ssid_len)
+ return -ENOLINK;
+
err = rdev->ops->leave_ibss(&rdev->wiphy, dev);
if (err)
return err;
- cfg80211_clear_ibss(dev, nowext);
+ __cfg80211_clear_ibss(dev, nowext);
return 0;
}
-#ifdef CONFIG_WIRELESS_EXT
-static int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev)
+int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, bool nowext)
{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_leave_ibss(rdev, dev, nowext);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+#ifdef CONFIG_WIRELESS_EXT
+int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ struct cfg80211_cached_keys *ck = NULL;
enum ieee80211_band band;
- int i;
+ int i, err;
+
+ ASSERT_WDEV_LOCK(wdev);
if (!wdev->wext.ibss.beacon_interval)
wdev->wext.ibss.beacon_interval = 100;
@@ -154,43 +251,66 @@
if (!netif_running(wdev->netdev))
return 0;
- return cfg80211_join_ibss(wiphy_to_dev(wdev->wiphy),
- wdev->netdev, &wdev->wext.ibss);
+ if (wdev->wext.keys)
+ wdev->wext.keys->def = wdev->wext.default_key;
+
+ wdev->wext.ibss.privacy = wdev->wext.default_key != -1;
+
+ if (wdev->wext.keys) {
+ ck = kmemdup(wdev->wext.keys, sizeof(*ck), GFP_KERNEL);
+ if (!ck)
+ return -ENOMEM;
+ for (i = 0; i < 6; i++)
+ ck->params[i].key = ck->data[i];
+ }
+ err = __cfg80211_join_ibss(rdev, wdev->netdev,
+ &wdev->wext.ibss, ck);
+ if (err)
+ kfree(ck);
+
+ return err;
}
int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
+ struct iw_freq *wextfreq, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- struct ieee80211_channel *chan;
- int err;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct ieee80211_channel *chan = NULL;
+ int err, freq;
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
- if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+ if (!rdev->ops->join_ibss)
return -EOPNOTSUPP;
- chan = cfg80211_wext_freq(wdev->wiphy, freq);
- if (chan && IS_ERR(chan))
- return PTR_ERR(chan);
+ freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
+ if (freq < 0)
+ return freq;
- if (chan &&
- (chan->flags & IEEE80211_CHAN_NO_IBSS ||
- chan->flags & IEEE80211_CHAN_DISABLED))
- return -EINVAL;
+ if (freq) {
+ chan = ieee80211_get_channel(wdev->wiphy, freq);
+ if (!chan)
+ return -EINVAL;
+ if (chan->flags & IEEE80211_CHAN_NO_IBSS ||
+ chan->flags & IEEE80211_CHAN_DISABLED)
+ return -EINVAL;
+ }
if (wdev->wext.ibss.channel == chan)
return 0;
- if (wdev->ssid_len) {
- err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
- dev, true);
- if (err)
- return err;
- }
+ wdev_lock(wdev);
+ err = 0;
+ if (wdev->ssid_len)
+ err = __cfg80211_leave_ibss(rdev, dev, true);
+ wdev_unlock(wdev);
+
+ if (err)
+ return err;
if (chan) {
wdev->wext.ibss.channel = chan;
@@ -200,10 +320,14 @@
wdev->wext.ibss.channel_fixed = false;
}
- return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+ err = cfg80211_ibss_wext_join(rdev, wdev);
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return err;
}
-/* temporary symbol - mark GPL - in the future the handler won't be */
-EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwfreq);
int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
struct iw_request_info *info,
@@ -216,10 +340,12 @@
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
+ wdev_lock(wdev);
if (wdev->current_bss)
- chan = wdev->current_bss->channel;
+ chan = wdev->current_bss->pub.channel;
else if (wdev->wext.ibss.channel)
chan = wdev->wext.ibss.channel;
+ wdev_unlock(wdev);
if (chan) {
freq->m = chan->center_freq;
@@ -230,14 +356,13 @@
/* no channel if not joining */
return -EINVAL;
}
-/* temporary symbol - mark GPL - in the future the handler won't be */
-EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwfreq);
int cfg80211_ibss_wext_siwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
size_t len = data->length;
int err;
@@ -245,15 +370,17 @@
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
- if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+ if (!rdev->ops->join_ibss)
return -EOPNOTSUPP;
- if (wdev->ssid_len) {
- err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
- dev, true);
- if (err)
- return err;
- }
+ wdev_lock(wdev);
+ err = 0;
+ if (wdev->ssid_len)
+ err = __cfg80211_leave_ibss(rdev, dev, true);
+ wdev_unlock(wdev);
+
+ if (err)
+ return err;
/* iwconfig uses nul termination in SSID.. */
if (len > 0 && ssid[len - 1] == '\0')
@@ -263,10 +390,14 @@
memcpy(wdev->wext.ibss.ssid, ssid, len);
wdev->wext.ibss.ssid_len = len;
- return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+ err = cfg80211_ibss_wext_join(rdev, wdev);
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return err;
}
-/* temporary symbol - mark GPL - in the future the handler won't be */
-EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwessid);
int cfg80211_ibss_wext_giwessid(struct net_device *dev,
struct iw_request_info *info,
@@ -280,6 +411,7 @@
data->flags = 0;
+ wdev_lock(wdev);
if (wdev->ssid_len) {
data->flags = 1;
data->length = wdev->ssid_len;
@@ -289,17 +421,17 @@
data->length = wdev->wext.ibss.ssid_len;
memcpy(ssid, wdev->wext.ibss.ssid, data->length);
}
+ wdev_unlock(wdev);
return 0;
}
-/* temporary symbol - mark GPL - in the future the handler won't be */
-EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwessid);
int cfg80211_ibss_wext_siwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
u8 *bssid = ap_addr->sa_data;
int err;
@@ -307,7 +439,7 @@
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
- if (!wiphy_to_dev(wdev->wiphy)->ops->join_ibss)
+ if (!rdev->ops->join_ibss)
return -EOPNOTSUPP;
if (ap_addr->sa_family != ARPHRD_ETHER)
@@ -326,12 +458,14 @@
compare_ether_addr(bssid, wdev->wext.ibss.bssid) == 0)
return 0;
- if (wdev->ssid_len) {
- err = cfg80211_leave_ibss(wiphy_to_dev(wdev->wiphy),
- dev, true);
- if (err)
- return err;
- }
+ wdev_lock(wdev);
+ err = 0;
+ if (wdev->ssid_len)
+ err = __cfg80211_leave_ibss(rdev, dev, true);
+ wdev_unlock(wdev);
+
+ if (err)
+ return err;
if (bssid) {
memcpy(wdev->wext.bssid, bssid, ETH_ALEN);
@@ -339,10 +473,14 @@
} else
wdev->wext.ibss.bssid = NULL;
- return cfg80211_ibss_wext_join(wiphy_to_dev(wdev->wiphy), wdev);
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+ err = cfg80211_ibss_wext_join(rdev, wdev);
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return err;
}
-/* temporary symbol - mark GPL - in the future the handler won't be */
-EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_siwap);
int cfg80211_ibss_wext_giwap(struct net_device *dev,
struct iw_request_info *info,
@@ -356,14 +494,16 @@
ap_addr->sa_family = ARPHRD_ETHER;
- if (wdev->wext.ibss.bssid) {
+ wdev_lock(wdev);
+ if (wdev->current_bss)
+ memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN);
+ else if (wdev->wext.ibss.bssid)
memcpy(ap_addr->sa_data, wdev->wext.ibss.bssid, ETH_ALEN);
- return 0;
- }
+ else
+ memset(ap_addr->sa_data, 0, ETH_ALEN);
- memcpy(ap_addr->sa_data, wdev->bssid, ETH_ALEN);
+ wdev_unlock(wdev);
+
return 0;
}
-/* temporary symbol - mark GPL - in the future the handler won't be */
-EXPORT_SYMBOL_GPL(cfg80211_ibss_wext_giwap);
#endif
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 4218436..79d2eec 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -8,75 +8,652 @@
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/nl80211.h>
+#include <linux/wireless.h>
#include <net/cfg80211.h>
+#include <net/iw_handler.h>
#include "core.h"
#include "nl80211.h"
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len)
{
- struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_send_rx_auth(rdev, dev, buf, len);
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
+ u8 *bssid = mgmt->bssid;
+ int i;
+ u16 status = le16_to_cpu(mgmt->u.auth.status_code);
+ bool done = false;
+
+ wdev_lock(wdev);
+
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (wdev->authtry_bsses[i] &&
+ memcmp(wdev->authtry_bsses[i]->pub.bssid, bssid,
+ ETH_ALEN) == 0) {
+ if (status == WLAN_STATUS_SUCCESS) {
+ wdev->auth_bsses[i] = wdev->authtry_bsses[i];
+ } else {
+ cfg80211_unhold_bss(wdev->authtry_bsses[i]);
+ cfg80211_put_bss(&wdev->authtry_bsses[i]->pub);
+ }
+ wdev->authtry_bsses[i] = NULL;
+ done = true;
+ break;
+ }
+ }
+
+ WARN_ON(!done);
+
+ nl80211_send_rx_auth(rdev, dev, buf, len, GFP_KERNEL);
+ cfg80211_sme_rx_auth(dev, buf, len);
+
+ wdev_unlock(wdev);
}
EXPORT_SYMBOL(cfg80211_send_rx_auth);
void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len)
{
- struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ u16 status_code;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_send_rx_assoc(rdev, dev, buf, len);
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
+ u8 *ie = mgmt->u.assoc_resp.variable;
+ int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
+ struct cfg80211_internal_bss *bss = NULL;
+
+ wdev_lock(wdev);
+
+ status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
+
+ /*
+ * This is a bit of a hack, we don't notify userspace of
+ * a (re-)association reply if we tried to send a reassoc
+ * and got a reject -- we only try again with an assoc
+ * frame instead of reassoc.
+ */
+ if (status_code != WLAN_STATUS_SUCCESS && wdev->conn &&
+ cfg80211_sme_failed_reassoc(wdev))
+ goto out;
+
+ nl80211_send_rx_assoc(rdev, dev, buf, len, GFP_KERNEL);
+
+ if (status_code == WLAN_STATUS_SUCCESS) {
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (!wdev->auth_bsses[i])
+ continue;
+ if (memcmp(wdev->auth_bsses[i]->pub.bssid, mgmt->bssid,
+ ETH_ALEN) == 0) {
+ bss = wdev->auth_bsses[i];
+ wdev->auth_bsses[i] = NULL;
+ /* additional reference to drop hold */
+ cfg80211_ref_bss(bss);
+ break;
+ }
+ }
+
+ WARN_ON(!bss);
+ }
+
+ if (!wdev->conn && wdev->sme_state == CFG80211_SME_IDLE) {
+ /*
+ * This is for the userspace SME, the CONNECTING
+ * state will be changed to CONNECTED by
+ * __cfg80211_connect_result() below.
+ */
+ wdev->sme_state = CFG80211_SME_CONNECTING;
+ }
+
+ /* this consumes one bss reference (unless bss is NULL) */
+ __cfg80211_connect_result(dev, mgmt->bssid, NULL, 0, ie, len - ieoffs,
+ status_code,
+ status_code == WLAN_STATUS_SUCCESS,
+ bss ? &bss->pub : NULL);
+ /* drop hold now, and also reference acquired above */
+ if (bss) {
+ cfg80211_unhold_bss(bss);
+ cfg80211_put_bss(&bss->pub);
+ }
+
+ out:
+ wdev_unlock(wdev);
}
EXPORT_SYMBOL(cfg80211_send_rx_assoc);
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len)
+static void __cfg80211_send_deauth(struct net_device *dev,
+ const u8 *buf, size_t len)
{
- struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_send_deauth(rdev, dev, buf, len);
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
+ const u8 *bssid = mgmt->bssid;
+ int i;
+ bool done = false;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ nl80211_send_deauth(rdev, dev, buf, len, GFP_KERNEL);
+
+ if (wdev->current_bss &&
+ memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
+ done = true;
+ cfg80211_unhold_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
+ wdev->current_bss = NULL;
+ } else for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (wdev->auth_bsses[i] &&
+ memcmp(wdev->auth_bsses[i]->pub.bssid, bssid, ETH_ALEN) == 0) {
+ cfg80211_unhold_bss(wdev->auth_bsses[i]);
+ cfg80211_put_bss(&wdev->auth_bsses[i]->pub);
+ wdev->auth_bsses[i] = NULL;
+ done = true;
+ break;
+ }
+ if (wdev->authtry_bsses[i] &&
+ memcmp(wdev->authtry_bsses[i]->pub.bssid, bssid, ETH_ALEN) == 0) {
+ cfg80211_unhold_bss(wdev->authtry_bsses[i]);
+ cfg80211_put_bss(&wdev->authtry_bsses[i]->pub);
+ wdev->authtry_bsses[i] = NULL;
+ done = true;
+ break;
+ }
+ }
+
+ WARN_ON(!done);
+
+ if (wdev->sme_state == CFG80211_SME_CONNECTED) {
+ u16 reason_code;
+ bool from_ap;
+
+ reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
+
+ from_ap = memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0;
+ __cfg80211_disconnected(dev, NULL, 0, reason_code, from_ap);
+ } else if (wdev->sme_state == CFG80211_SME_CONNECTING) {
+ __cfg80211_connect_result(dev, mgmt->bssid, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ false, NULL);
+ }
+}
+
+
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
+ void *cookie)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ BUG_ON(cookie && wdev != cookie);
+
+ if (cookie) {
+ /* called within callback */
+ __cfg80211_send_deauth(dev, buf, len);
+ } else {
+ wdev_lock(wdev);
+ __cfg80211_send_deauth(dev, buf, len);
+ wdev_unlock(wdev);
+ }
}
EXPORT_SYMBOL(cfg80211_send_deauth);
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len)
+static void __cfg80211_send_disassoc(struct net_device *dev,
+ const u8 *buf, size_t len)
{
- struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_send_disassoc(rdev, dev, buf, len);
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
+ const u8 *bssid = mgmt->bssid;
+ int i;
+ u16 reason_code;
+ bool from_ap;
+ bool done = false;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ nl80211_send_disassoc(rdev, dev, buf, len, GFP_KERNEL);
+
+ if (wdev->sme_state != CFG80211_SME_CONNECTED)
+ return;
+
+ if (wdev->current_bss &&
+ memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (wdev->authtry_bsses[i] || wdev->auth_bsses[i])
+ continue;
+ wdev->auth_bsses[i] = wdev->current_bss;
+ wdev->current_bss = NULL;
+ done = true;
+ cfg80211_sme_disassoc(dev, i);
+ break;
+ }
+ WARN_ON(!done);
+ } else
+ WARN_ON(1);
+
+
+ reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
+
+ from_ap = memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0;
+ __cfg80211_disconnected(dev, NULL, 0, reason_code, from_ap);
+}
+
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
+ void *cookie)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ BUG_ON(cookie && wdev != cookie);
+
+ if (cookie) {
+ /* called within callback */
+ __cfg80211_send_disassoc(dev, buf, len);
+ } else {
+ wdev_lock(wdev);
+ __cfg80211_send_disassoc(dev, buf, len);
+ wdev_unlock(wdev);
+ }
}
EXPORT_SYMBOL(cfg80211_send_disassoc);
-static void cfg80211_wext_disconnected(struct net_device *dev)
-{
-#ifdef CONFIG_WIRELESS_EXT
- union iwreq_data wrqu;
- memset(&wrqu, 0, sizeof(wrqu));
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
-#endif
-}
-
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr)
{
- struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_send_auth_timeout(rdev, dev, addr);
- cfg80211_wext_disconnected(dev);
+ int i;
+ bool done = false;
+
+ wdev_lock(wdev);
+
+ nl80211_send_auth_timeout(rdev, dev, addr, GFP_KERNEL);
+ if (wdev->sme_state == CFG80211_SME_CONNECTING)
+ __cfg80211_connect_result(dev, addr, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ false, NULL);
+
+ for (i = 0; addr && i < MAX_AUTH_BSSES; i++) {
+ if (wdev->authtry_bsses[i] &&
+ memcmp(wdev->authtry_bsses[i]->pub.bssid,
+ addr, ETH_ALEN) == 0) {
+ cfg80211_unhold_bss(wdev->authtry_bsses[i]);
+ cfg80211_put_bss(&wdev->authtry_bsses[i]->pub);
+ wdev->authtry_bsses[i] = NULL;
+ done = true;
+ break;
+ }
+ }
+
+ WARN_ON(!done);
+
+ wdev_unlock(wdev);
}
EXPORT_SYMBOL(cfg80211_send_auth_timeout);
void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr)
{
- struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_send_assoc_timeout(rdev, dev, addr);
- cfg80211_wext_disconnected(dev);
+ int i;
+ bool done = false;
+
+ wdev_lock(wdev);
+
+ nl80211_send_assoc_timeout(rdev, dev, addr, GFP_KERNEL);
+ if (wdev->sme_state == CFG80211_SME_CONNECTING)
+ __cfg80211_connect_result(dev, addr, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ false, NULL);
+
+ for (i = 0; addr && i < MAX_AUTH_BSSES; i++) {
+ if (wdev->auth_bsses[i] &&
+ memcmp(wdev->auth_bsses[i]->pub.bssid,
+ addr, ETH_ALEN) == 0) {
+ cfg80211_unhold_bss(wdev->auth_bsses[i]);
+ cfg80211_put_bss(&wdev->auth_bsses[i]->pub);
+ wdev->auth_bsses[i] = NULL;
+ done = true;
+ break;
+ }
+ }
+
+ WARN_ON(!done);
+
+ wdev_unlock(wdev);
}
EXPORT_SYMBOL(cfg80211_send_assoc_timeout);
void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
enum nl80211_key_type key_type, int key_id,
- const u8 *tsc)
+ const u8 *tsc, gfp_t gfp)
{
struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- nl80211_michael_mic_failure(rdev, dev, addr, key_type, key_id, tsc);
+#ifdef CONFIG_WIRELESS_EXT
+ union iwreq_data wrqu;
+ char *buf = kmalloc(128, gfp);
+
+ if (buf) {
+ sprintf(buf, "MLME-MICHAELMICFAILURE.indication("
+ "keyid=%d %scast addr=%pM)", key_id,
+ key_type == NL80211_KEYTYPE_GROUP ? "broad" : "uni",
+ addr);
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+ kfree(buf);
+ }
+#endif
+
+ nl80211_michael_mic_failure(rdev, dev, addr, key_type, key_id, tsc, gfp);
}
EXPORT_SYMBOL(cfg80211_michael_mic_failure);
+
+/* some MLME handling for userspace SME */
+int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_auth_type auth_type,
+ const u8 *bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len,
+ const u8 *key, int key_len, int key_idx)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_auth_request req;
+ struct cfg80211_internal_bss *bss;
+ int i, err, slot = -1, nfree = 0;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (auth_type == NL80211_AUTHTYPE_SHARED_KEY)
+ if (!key || !key_len || key_idx < 0 || key_idx > 4)
+ return -EINVAL;
+
+ if (wdev->current_bss &&
+ memcmp(bssid, wdev->current_bss->pub.bssid, ETH_ALEN) == 0)
+ return -EALREADY;
+
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (wdev->authtry_bsses[i] &&
+ memcmp(bssid, wdev->authtry_bsses[i]->pub.bssid,
+ ETH_ALEN) == 0)
+ return -EALREADY;
+ if (wdev->auth_bsses[i] &&
+ memcmp(bssid, wdev->auth_bsses[i]->pub.bssid,
+ ETH_ALEN) == 0)
+ return -EALREADY;
+ }
+
+ memset(&req, 0, sizeof(req));
+
+ req.ie = ie;
+ req.ie_len = ie_len;
+ req.auth_type = auth_type;
+ req.bss = cfg80211_get_bss(&rdev->wiphy, chan, bssid, ssid, ssid_len,
+ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+ req.key = key;
+ req.key_len = key_len;
+ req.key_idx = key_idx;
+ if (!req.bss)
+ return -ENOENT;
+
+ bss = bss_from_pub(req.bss);
+
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (!wdev->auth_bsses[i] && !wdev->authtry_bsses[i]) {
+ slot = i;
+ nfree++;
+ }
+ }
+
+ /* we need one free slot for disassoc and one for this auth */
+ if (nfree < 2) {
+ err = -ENOSPC;
+ goto out;
+ }
+
+ wdev->authtry_bsses[slot] = bss;
+ cfg80211_hold_bss(bss);
+
+ err = rdev->ops->auth(&rdev->wiphy, dev, &req);
+ if (err) {
+ wdev->authtry_bsses[slot] = NULL;
+ cfg80211_unhold_bss(bss);
+ }
+
+ out:
+ if (err)
+ cfg80211_put_bss(req.bss);
+ return err;
+}
+
+int cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, struct ieee80211_channel *chan,
+ enum nl80211_auth_type auth_type, const u8 *bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len,
+ const u8 *key, int key_len, int key_idx)
+{
+ int err;
+
+ wdev_lock(dev->ieee80211_ptr);
+ err = __cfg80211_mlme_auth(rdev, dev, chan, auth_type, bssid,
+ ssid, ssid_len, ie, ie_len,
+ key, key_len, key_idx);
+ wdev_unlock(dev->ieee80211_ptr);
+
+ return err;
+}
+
+int __cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ const u8 *bssid, const u8 *prev_bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len, bool use_mfp,
+ struct cfg80211_crypto_settings *crypt)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_assoc_request req;
+ struct cfg80211_internal_bss *bss;
+ int i, err, slot = -1;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ memset(&req, 0, sizeof(req));
+
+ if (wdev->current_bss)
+ return -EALREADY;
+
+ req.ie = ie;
+ req.ie_len = ie_len;
+ memcpy(&req.crypto, crypt, sizeof(req.crypto));
+ req.use_mfp = use_mfp;
+ req.prev_bssid = prev_bssid;
+ req.bss = cfg80211_get_bss(&rdev->wiphy, chan, bssid, ssid, ssid_len,
+ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+ if (!req.bss)
+ return -ENOENT;
+
+ bss = bss_from_pub(req.bss);
+
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (bss == wdev->auth_bsses[i]) {
+ slot = i;
+ break;
+ }
+ }
+
+ if (slot < 0) {
+ err = -ENOTCONN;
+ goto out;
+ }
+
+ err = rdev->ops->assoc(&rdev->wiphy, dev, &req);
+ out:
+ /* still a reference in wdev->auth_bsses[slot] */
+ cfg80211_put_bss(req.bss);
+ return err;
+}
+
+int cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ const u8 *bssid, const u8 *prev_bssid,
+ const u8 *ssid, int ssid_len,
+ const u8 *ie, int ie_len, bool use_mfp,
+ struct cfg80211_crypto_settings *crypt)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_mlme_assoc(rdev, dev, chan, bssid, prev_bssid,
+ ssid, ssid_len, ie, ie_len, use_mfp, crypt);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_deauth_request req;
+ int i;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ memset(&req, 0, sizeof(req));
+ req.reason_code = reason;
+ req.ie = ie;
+ req.ie_len = ie_len;
+ if (wdev->current_bss &&
+ memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
+ req.bss = &wdev->current_bss->pub;
+ } else for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (wdev->auth_bsses[i] &&
+ memcmp(bssid, wdev->auth_bsses[i]->pub.bssid, ETH_ALEN) == 0) {
+ req.bss = &wdev->auth_bsses[i]->pub;
+ break;
+ }
+ if (wdev->authtry_bsses[i] &&
+ memcmp(bssid, wdev->authtry_bsses[i]->pub.bssid, ETH_ALEN) == 0) {
+ req.bss = &wdev->authtry_bsses[i]->pub;
+ break;
+ }
+ }
+
+ if (!req.bss)
+ return -ENOTCONN;
+
+ return rdev->ops->deauth(&rdev->wiphy, dev, &req, wdev);
+}
+
+int cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_mlme_deauth(rdev, dev, bssid, ie, ie_len, reason);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+static int __cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_disassoc_request req;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (wdev->sme_state != CFG80211_SME_CONNECTED)
+ return -ENOTCONN;
+
+ if (WARN_ON(!wdev->current_bss))
+ return -ENOTCONN;
+
+ memset(&req, 0, sizeof(req));
+ req.reason_code = reason;
+ req.ie = ie;
+ req.ie_len = ie_len;
+ if (memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0)
+ req.bss = &wdev->current_bss->pub;
+ else
+ return -ENOTCONN;
+
+ return rdev->ops->disassoc(&rdev->wiphy, dev, &req, wdev);
+}
+
+int cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *bssid,
+ const u8 *ie, int ie_len, u16 reason)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_mlme_disassoc(rdev, dev, bssid, ie, ie_len, reason);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+void cfg80211_mlme_down(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_deauth_request req;
+ int i;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (!rdev->ops->deauth)
+ return;
+
+ memset(&req, 0, sizeof(req));
+ req.reason_code = WLAN_REASON_DEAUTH_LEAVING;
+ req.ie = NULL;
+ req.ie_len = 0;
+
+ if (wdev->current_bss) {
+ req.bss = &wdev->current_bss->pub;
+ rdev->ops->deauth(&rdev->wiphy, dev, &req, wdev);
+ if (wdev->current_bss) {
+ cfg80211_unhold_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
+ wdev->current_bss = NULL;
+ }
+ }
+
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (wdev->auth_bsses[i]) {
+ req.bss = &wdev->auth_bsses[i]->pub;
+ rdev->ops->deauth(&rdev->wiphy, dev, &req, wdev);
+ if (wdev->auth_bsses[i]) {
+ cfg80211_unhold_bss(wdev->auth_bsses[i]);
+ cfg80211_put_bss(&wdev->auth_bsses[i]->pub);
+ wdev->auth_bsses[i] = NULL;
+ }
+ }
+ if (wdev->authtry_bsses[i]) {
+ req.bss = &wdev->authtry_bsses[i]->pub;
+ rdev->ops->deauth(&rdev->wiphy, dev, &req, wdev);
+ if (wdev->authtry_bsses[i]) {
+ cfg80211_unhold_bss(wdev->authtry_bsses[i]);
+ cfg80211_put_bss(&wdev->authtry_bsses[i]->pub);
+ wdev->authtry_bsses[i] = NULL;
+ }
+ }
+ }
+}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 634496b..eddab09 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -14,8 +14,10 @@
#include <linux/rtnetlink.h>
#include <linux/netlink.h>
#include <linux/etherdevice.h>
+#include <net/net_namespace.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
+#include <net/sock.h>
#include "core.h"
#include "nl80211.h"
#include "reg.h"
@@ -27,27 +29,29 @@
.hdrsize = 0, /* no private header */
.version = 1, /* no particular meaning now */
.maxattr = NL80211_ATTR_MAX,
+ .netnsok = true,
};
-/* internal helper: get drv and dev */
-static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
- struct cfg80211_registered_device **drv,
+/* internal helper: get rdev and dev */
+static int get_rdev_dev_by_info_ifindex(struct genl_info *info,
+ struct cfg80211_registered_device **rdev,
struct net_device **dev)
{
+ struct nlattr **attrs = info->attrs;
int ifindex;
if (!attrs[NL80211_ATTR_IFINDEX])
return -EINVAL;
ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
- *dev = dev_get_by_index(&init_net, ifindex);
+ *dev = dev_get_by_index(genl_info_net(info), ifindex);
if (!*dev)
return -ENODEV;
- *drv = cfg80211_get_dev_from_ifindex(ifindex);
- if (IS_ERR(*drv)) {
+ *rdev = cfg80211_get_dev_from_ifindex(genl_info_net(info), ifindex);
+ if (IS_ERR(*rdev)) {
dev_put(*dev);
- return PTR_ERR(*drv);
+ return PTR_ERR(*rdev);
}
return 0;
@@ -71,7 +75,9 @@
[NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 },
[NL80211_ATTR_MAC] = { .type = NLA_BINARY, .len = ETH_ALEN },
+ [NL80211_ATTR_PREV_BSSID] = { .type = NLA_BINARY, .len = ETH_ALEN },
+ [NL80211_ATTR_KEY] = { .type = NLA_NESTED, },
[NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY,
.len = WLAN_MAX_KEY_LEN },
[NL80211_ATTR_KEY_IDX] = { .type = NLA_U8 },
@@ -128,6 +134,21 @@
.len = sizeof(struct nl80211_sta_flag_update),
},
[NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG },
+ [NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG },
+ [NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
+ [NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
+ [NL80211_ATTR_PID] = { .type = NLA_U32 },
+};
+
+/* policy for the attributes */
+static struct nla_policy
+nl80211_key_policy[NL80211_KEY_MAX + 1] __read_mostly = {
+ [NL80211_KEY_DATA] = { .type = NLA_BINARY, .len = WLAN_MAX_KEY_LEN },
+ [NL80211_KEY_IDX] = { .type = NLA_U8 },
+ [NL80211_KEY_CIPHER] = { .type = NLA_U32 },
+ [NL80211_KEY_SEQ] = { .type = NLA_BINARY, .len = 8 },
+ [NL80211_KEY_DEFAULT] = { .type = NLA_FLAG },
+ [NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG },
};
/* IE validation */
@@ -194,6 +215,177 @@
/* netlink command implementations */
+struct key_parse {
+ struct key_params p;
+ int idx;
+ bool def, defmgmt;
+};
+
+static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k)
+{
+ struct nlattr *tb[NL80211_KEY_MAX + 1];
+ int err = nla_parse_nested(tb, NL80211_KEY_MAX, key,
+ nl80211_key_policy);
+ if (err)
+ return err;
+
+ k->def = !!tb[NL80211_KEY_DEFAULT];
+ k->defmgmt = !!tb[NL80211_KEY_DEFAULT_MGMT];
+
+ if (tb[NL80211_KEY_IDX])
+ k->idx = nla_get_u8(tb[NL80211_KEY_IDX]);
+
+ if (tb[NL80211_KEY_DATA]) {
+ k->p.key = nla_data(tb[NL80211_KEY_DATA]);
+ k->p.key_len = nla_len(tb[NL80211_KEY_DATA]);
+ }
+
+ if (tb[NL80211_KEY_SEQ]) {
+ k->p.seq = nla_data(tb[NL80211_KEY_SEQ]);
+ k->p.seq_len = nla_len(tb[NL80211_KEY_SEQ]);
+ }
+
+ if (tb[NL80211_KEY_CIPHER])
+ k->p.cipher = nla_get_u32(tb[NL80211_KEY_CIPHER]);
+
+ return 0;
+}
+
+static int nl80211_parse_key_old(struct genl_info *info, struct key_parse *k)
+{
+ if (info->attrs[NL80211_ATTR_KEY_DATA]) {
+ k->p.key = nla_data(info->attrs[NL80211_ATTR_KEY_DATA]);
+ k->p.key_len = nla_len(info->attrs[NL80211_ATTR_KEY_DATA]);
+ }
+
+ if (info->attrs[NL80211_ATTR_KEY_SEQ]) {
+ k->p.seq = nla_data(info->attrs[NL80211_ATTR_KEY_SEQ]);
+ k->p.seq_len = nla_len(info->attrs[NL80211_ATTR_KEY_SEQ]);
+ }
+
+ if (info->attrs[NL80211_ATTR_KEY_IDX])
+ k->idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
+
+ if (info->attrs[NL80211_ATTR_KEY_CIPHER])
+ k->p.cipher = nla_get_u32(info->attrs[NL80211_ATTR_KEY_CIPHER]);
+
+ k->def = !!info->attrs[NL80211_ATTR_KEY_DEFAULT];
+ k->defmgmt = !!info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT];
+
+ return 0;
+}
+
+static int nl80211_parse_key(struct genl_info *info, struct key_parse *k)
+{
+ int err;
+
+ memset(k, 0, sizeof(*k));
+ k->idx = -1;
+
+ if (info->attrs[NL80211_ATTR_KEY])
+ err = nl80211_parse_key_new(info->attrs[NL80211_ATTR_KEY], k);
+ else
+ err = nl80211_parse_key_old(info, k);
+
+ if (err)
+ return err;
+
+ if (k->def && k->defmgmt)
+ return -EINVAL;
+
+ if (k->idx != -1) {
+ if (k->defmgmt) {
+ if (k->idx < 4 || k->idx > 5)
+ return -EINVAL;
+ } else if (k->def) {
+ if (k->idx < 0 || k->idx > 3)
+ return -EINVAL;
+ } else {
+ if (k->idx < 0 || k->idx > 5)
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static struct cfg80211_cached_keys *
+nl80211_parse_connkeys(struct cfg80211_registered_device *rdev,
+ struct nlattr *keys)
+{
+ struct key_parse parse;
+ struct nlattr *key;
+ struct cfg80211_cached_keys *result;
+ int rem, err, def = 0;
+
+ result = kzalloc(sizeof(*result), GFP_KERNEL);
+ if (!result)
+ return ERR_PTR(-ENOMEM);
+
+ result->def = -1;
+ result->defmgmt = -1;
+
+ nla_for_each_nested(key, keys, rem) {
+ memset(&parse, 0, sizeof(parse));
+ parse.idx = -1;
+
+ err = nl80211_parse_key_new(key, &parse);
+ if (err)
+ goto error;
+ err = -EINVAL;
+ if (!parse.p.key)
+ goto error;
+ if (parse.idx < 0 || parse.idx > 4)
+ goto error;
+ if (parse.def) {
+ if (def)
+ goto error;
+ def = 1;
+ result->def = parse.idx;
+ } else if (parse.defmgmt)
+ goto error;
+ err = cfg80211_validate_key_settings(rdev, &parse.p,
+ parse.idx, NULL);
+ if (err)
+ goto error;
+ result->params[parse.idx].cipher = parse.p.cipher;
+ result->params[parse.idx].key_len = parse.p.key_len;
+ result->params[parse.idx].key = result->data[parse.idx];
+ memcpy(result->data[parse.idx], parse.p.key, parse.p.key_len);
+ }
+
+ return result;
+ error:
+ kfree(result);
+ return ERR_PTR(err);
+}
+
+static int nl80211_key_allowed(struct wireless_dev *wdev)
+{
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (!netif_running(wdev->netdev))
+ return -ENETDOWN;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ if (!wdev->current_bss)
+ return -ENOLINK;
+ break;
+ case NL80211_IFTYPE_STATION:
+ if (wdev->sme_state != CFG80211_SME_CONNECTED)
+ return -ENOLINK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *dev)
{
@@ -216,6 +408,9 @@
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->wiphy_idx);
NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
+ NLA_PUT_U32(msg, NL80211_ATTR_GENERATION,
+ cfg80211_rdev_list_generation);
+
NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_SHORT,
dev->wiphy.retry_short);
NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_LONG,
@@ -345,8 +540,23 @@
CMD(deauth, DEAUTHENTICATE);
CMD(disassoc, DISASSOCIATE);
CMD(join_ibss, JOIN_IBSS);
+ if (dev->wiphy.netnsok) {
+ i++;
+ NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
+ }
#undef CMD
+
+ if (dev->ops->connect || dev->ops->auth) {
+ i++;
+ NLA_PUT_U32(msg, i, NL80211_CMD_CONNECT);
+ }
+
+ if (dev->ops->disconnect || dev->ops->deauth) {
+ i++;
+ NLA_PUT_U32(msg, i, NL80211_CMD_DISCONNECT);
+ }
+
nla_nest_end(msg, nl_cmds);
return genlmsg_end(msg, hdr);
@@ -363,7 +573,9 @@
struct cfg80211_registered_device *dev;
mutex_lock(&cfg80211_mutex);
- list_for_each_entry(dev, &cfg80211_drv_list, list) {
+ list_for_each_entry(dev, &cfg80211_rdev_list, list) {
+ if (!net_eq(wiphy_net(&dev->wiphy), sock_net(skb->sk)))
+ continue;
if (++idx <= start)
continue;
if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).pid,
@@ -396,14 +608,14 @@
if (nl80211_send_wiphy(msg, info->snd_pid, info->snd_seq, 0, dev) < 0)
goto out_free;
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(dev);
- return genlmsg_unicast(msg, info->snd_pid);
+ return genlmsg_reply(msg, info);
out_free:
nlmsg_free(msg);
out_err:
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(dev);
return -ENOBUFS;
}
@@ -445,7 +657,7 @@
mutex_lock(&cfg80211_mutex);
- rdev = __cfg80211_drv_from_info(info);
+ rdev = __cfg80211_rdev_from_info(info);
if (IS_ERR(rdev)) {
mutex_unlock(&cfg80211_mutex);
result = PTR_ERR(rdev);
@@ -492,15 +704,8 @@
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
- struct ieee80211_channel *chan;
- struct ieee80211_sta_ht_cap *ht_cap;
u32 freq;
- if (!rdev->ops->set_channel) {
- result = -EOPNOTSUPP;
- goto bad_res;
- }
-
result = -EINVAL;
if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
@@ -514,38 +719,10 @@
}
freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
- chan = ieee80211_get_channel(&rdev->wiphy, freq);
- /* Primary channel not allowed */
- if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
- goto bad_res;
-
- if (channel_type == NL80211_CHAN_HT40MINUS &&
- (chan->flags & IEEE80211_CHAN_NO_HT40MINUS))
- goto bad_res;
- else if (channel_type == NL80211_CHAN_HT40PLUS &&
- (chan->flags & IEEE80211_CHAN_NO_HT40PLUS))
- goto bad_res;
-
- /*
- * At this point we know if that if HT40 was requested
- * we are allowed to use it and the extension channel
- * exists.
- */
-
- ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
-
- /* no HT capabilities or intolerant */
- if (channel_type != NL80211_CHAN_NO_HT) {
- if (!ht_cap->ht_supported)
- goto bad_res;
- if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
- (ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT))
- goto bad_res;
- }
-
- result = rdev->ops->set_channel(&rdev->wiphy, chan,
- channel_type);
+ mutex_lock(&rdev->devlist_mtx);
+ result = rdev_set_freq(rdev, NULL, freq, channel_type);
+ mutex_unlock(&rdev->devlist_mtx);
if (result)
goto bad_res;
}
@@ -651,6 +828,11 @@
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, dev->name);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, dev->ieee80211_ptr->iftype);
+
+ NLA_PUT_U32(msg, NL80211_ATTR_GENERATION,
+ rdev->devlist_generation ^
+ (cfg80211_rdev_list_generation << 2));
+
return genlmsg_end(msg, hdr);
nla_put_failure:
@@ -664,32 +846,34 @@
int if_idx = 0;
int wp_start = cb->args[0];
int if_start = cb->args[1];
- struct cfg80211_registered_device *dev;
+ struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
mutex_lock(&cfg80211_mutex);
- list_for_each_entry(dev, &cfg80211_drv_list, list) {
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+ if (!net_eq(wiphy_net(&rdev->wiphy), sock_net(skb->sk)))
+ continue;
if (wp_idx < wp_start) {
wp_idx++;
continue;
}
if_idx = 0;
- mutex_lock(&dev->devlist_mtx);
- list_for_each_entry(wdev, &dev->netdev_list, list) {
+ mutex_lock(&rdev->devlist_mtx);
+ list_for_each_entry(wdev, &rdev->netdev_list, list) {
if (if_idx < if_start) {
if_idx++;
continue;
}
if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
- dev, wdev->netdev) < 0) {
- mutex_unlock(&dev->devlist_mtx);
+ rdev, wdev->netdev) < 0) {
+ mutex_unlock(&rdev->devlist_mtx);
goto out;
}
if_idx++;
}
- mutex_unlock(&dev->devlist_mtx);
+ mutex_unlock(&rdev->devlist_mtx);
wp_idx++;
}
@@ -709,7 +893,7 @@
struct net_device *netdev;
int err;
- err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
+ err = get_rdev_dev_by_info_ifindex(info, &dev, &netdev);
if (err)
return err;
@@ -722,15 +906,15 @@
goto out_free;
dev_put(netdev);
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(dev);
- return genlmsg_unicast(msg, info->snd_pid);
+ return genlmsg_reply(msg, info);
out_free:
nlmsg_free(msg);
out_err:
dev_put(netdev);
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(dev);
return -ENOBUFS;
}
@@ -765,9 +949,9 @@
static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct vif_params params;
- int err, ifindex;
+ int err;
enum nl80211_iftype otype, ntype;
struct net_device *dev;
u32 _flags, *flags = NULL;
@@ -777,13 +961,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- ifindex = dev->ifindex;
otype = ntype = dev->ieee80211_ptr->iftype;
- dev_put(dev);
if (info->attrs[NL80211_ATTR_IFTYPE]) {
ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
@@ -795,12 +977,6 @@
}
}
- if (!drv->ops->change_virtual_intf ||
- !(drv->wiphy.interface_modes & (1 << ntype))) {
- err = -EOPNOTSUPP;
- goto unlock;
- }
-
if (info->attrs[NL80211_ATTR_MESH_ID]) {
if (ntype != NL80211_IFTYPE_MESH_POINT) {
err = -EINVAL;
@@ -826,21 +1002,13 @@
}
if (change)
- err = drv->ops->change_virtual_intf(&drv->wiphy, ifindex,
- ntype, flags, ¶ms);
+ err = cfg80211_change_iface(rdev, dev, ntype, flags, ¶ms);
else
err = 0;
- dev = __dev_get_by_index(&init_net, ifindex);
- WARN_ON(!dev || (!err && dev->ieee80211_ptr->iftype != ntype));
-
- if (dev && !err && (ntype != otype)) {
- if (otype == NL80211_IFTYPE_ADHOC)
- cfg80211_clear_ibss(dev, false);
- }
-
unlock:
- cfg80211_put_dev(drv);
+ dev_put(dev);
+ cfg80211_unlock_rdev(rdev);
unlock_rtnl:
rtnl_unlock();
return err;
@@ -848,7 +1016,7 @@
static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct vif_params params;
int err;
enum nl80211_iftype type = NL80211_IFTYPE_UNSPECIFIED;
@@ -867,14 +1035,14 @@
rtnl_lock();
- drv = cfg80211_get_dev_from_info(info);
- if (IS_ERR(drv)) {
- err = PTR_ERR(drv);
+ rdev = cfg80211_get_dev_from_info(info);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
goto unlock_rtnl;
}
- if (!drv->ops->add_virtual_intf ||
- !(drv->wiphy.interface_modes & (1 << type))) {
+ if (!rdev->ops->add_virtual_intf ||
+ !(rdev->wiphy.interface_modes & (1 << type))) {
err = -EOPNOTSUPP;
goto unlock;
}
@@ -888,12 +1056,12 @@
err = parse_monitor_flags(type == NL80211_IFTYPE_MONITOR ?
info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
&flags);
- err = drv->ops->add_virtual_intf(&drv->wiphy,
+ err = rdev->ops->add_virtual_intf(&rdev->wiphy,
nla_data(info->attrs[NL80211_ATTR_IFNAME]),
type, err ? NULL : &flags, ¶ms);
unlock:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
unlock_rtnl:
rtnl_unlock();
return err;
@@ -901,27 +1069,26 @@
static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
- int ifindex, err;
+ struct cfg80211_registered_device *rdev;
+ int err;
struct net_device *dev;
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- ifindex = dev->ifindex;
- dev_put(dev);
- if (!drv->ops->del_virtual_intf) {
+ if (!rdev->ops->del_virtual_intf) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->del_virtual_intf(&drv->wiphy, ifindex);
+ err = rdev->ops->del_virtual_intf(&rdev->wiphy, dev);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
+ dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
@@ -930,10 +1097,12 @@
struct get_key_cookie {
struct sk_buff *msg;
int error;
+ int idx;
};
static void get_key_callback(void *c, struct key_params *params)
{
+ struct nlattr *key;
struct get_key_cookie *cookie = c;
if (params->key)
@@ -948,6 +1117,26 @@
NLA_PUT_U32(cookie->msg, NL80211_ATTR_KEY_CIPHER,
params->cipher);
+ key = nla_nest_start(cookie->msg, NL80211_ATTR_KEY);
+ if (!key)
+ goto nla_put_failure;
+
+ if (params->key)
+ NLA_PUT(cookie->msg, NL80211_KEY_DATA,
+ params->key_len, params->key);
+
+ if (params->seq)
+ NLA_PUT(cookie->msg, NL80211_KEY_SEQ,
+ params->seq_len, params->seq);
+
+ if (params->cipher)
+ NLA_PUT_U32(cookie->msg, NL80211_KEY_CIPHER,
+ params->cipher);
+
+ NLA_PUT_U8(cookie->msg, NL80211_ATTR_KEY_IDX, cookie->idx);
+
+ nla_nest_end(cookie->msg, key);
+
return;
nla_put_failure:
cookie->error = 1;
@@ -955,7 +1144,7 @@
static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
u8 key_idx = 0;
@@ -977,11 +1166,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->get_key) {
+ if (!rdev->ops->get_key) {
err = -EOPNOTSUPP;
goto out;
}
@@ -1001,13 +1190,14 @@
}
cookie.msg = msg;
+ cookie.idx = key_idx;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_idx);
if (mac_addr)
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
- err = drv->ops->get_key(&drv->wiphy, dev, key_idx, mac_addr,
+ err = rdev->ops->get_key(&rdev->wiphy, dev, key_idx, mac_addr,
&cookie, get_key_callback);
if (err)
@@ -1017,7 +1207,7 @@
goto nla_put_failure;
genlmsg_end(msg, hdr);
- err = genlmsg_unicast(msg, info->snd_pid);
+ err = genlmsg_reply(msg, info);
goto out;
nla_put_failure:
@@ -1025,7 +1215,7 @@
free_msg:
nlmsg_free(msg);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -1035,57 +1225,57 @@
static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
+ struct key_parse key;
int err;
struct net_device *dev;
- u8 key_idx;
int (*func)(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index);
- if (!info->attrs[NL80211_ATTR_KEY_IDX])
+ err = nl80211_parse_key(info, &key);
+ if (err)
+ return err;
+
+ if (key.idx < 0)
return -EINVAL;
- key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
-
- if (info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT]) {
- if (key_idx < 4 || key_idx > 5)
- return -EINVAL;
- } else if (key_idx > 3)
- return -EINVAL;
-
- /* currently only support setting default key */
- if (!info->attrs[NL80211_ATTR_KEY_DEFAULT] &&
- !info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT])
+ /* only support setting default key */
+ if (!key.def && !key.defmgmt)
return -EINVAL;
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (info->attrs[NL80211_ATTR_KEY_DEFAULT])
- func = drv->ops->set_default_key;
+ if (key.def)
+ func = rdev->ops->set_default_key;
else
- func = drv->ops->set_default_mgmt_key;
+ func = rdev->ops->set_default_mgmt_key;
if (!func) {
err = -EOPNOTSUPP;
goto out;
}
- err = func(&drv->wiphy, dev, key_idx);
+ wdev_lock(dev->ieee80211_ptr);
+ err = nl80211_key_allowed(dev->ieee80211_ptr);
+ if (!err)
+ err = func(&rdev->wiphy, dev, key.idx);
+
#ifdef CONFIG_WIRELESS_EXT
if (!err) {
- if (func == drv->ops->set_default_key)
- dev->ieee80211_ptr->wext.default_key = key_idx;
+ if (func == rdev->ops->set_default_key)
+ dev->ieee80211_ptr->wext.default_key = key.idx;
else
- dev->ieee80211_ptr->wext.default_mgmt_key = key_idx;
+ dev->ieee80211_ptr->wext.default_mgmt_key = key.idx;
}
#endif
+ wdev_unlock(dev->ieee80211_ptr);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
@@ -1096,62 +1286,47 @@
static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
- int err, i;
+ struct cfg80211_registered_device *rdev;
+ int err;
struct net_device *dev;
- struct key_params params;
- u8 key_idx = 0;
+ struct key_parse key;
u8 *mac_addr = NULL;
- memset(¶ms, 0, sizeof(params));
+ err = nl80211_parse_key(info, &key);
+ if (err)
+ return err;
- if (!info->attrs[NL80211_ATTR_KEY_CIPHER])
+ if (!key.p.key)
return -EINVAL;
- if (info->attrs[NL80211_ATTR_KEY_DATA]) {
- params.key = nla_data(info->attrs[NL80211_ATTR_KEY_DATA]);
- params.key_len = nla_len(info->attrs[NL80211_ATTR_KEY_DATA]);
- }
-
- if (info->attrs[NL80211_ATTR_KEY_SEQ]) {
- params.seq = nla_data(info->attrs[NL80211_ATTR_KEY_SEQ]);
- params.seq_len = nla_len(info->attrs[NL80211_ATTR_KEY_SEQ]);
- }
-
- if (info->attrs[NL80211_ATTR_KEY_IDX])
- key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
-
- params.cipher = nla_get_u32(info->attrs[NL80211_ATTR_KEY_CIPHER]);
-
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
- if (cfg80211_validate_key_settings(¶ms, key_idx, mac_addr))
- return -EINVAL;
-
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- for (i = 0; i < drv->wiphy.n_cipher_suites; i++)
- if (params.cipher == drv->wiphy.cipher_suites[i])
- break;
- if (i == drv->wiphy.n_cipher_suites) {
- err = -EINVAL;
- goto out;
- }
-
- if (!drv->ops->add_key) {
+ if (!rdev->ops->add_key) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->add_key(&drv->wiphy, dev, key_idx, mac_addr, ¶ms);
+ if (cfg80211_validate_key_settings(rdev, &key.p, key.idx, mac_addr)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ wdev_lock(dev->ieee80211_ptr);
+ err = nl80211_key_allowed(dev->ieee80211_ptr);
+ if (!err)
+ err = rdev->ops->add_key(&rdev->wiphy, dev, key.idx,
+ mac_addr, &key.p);
+ wdev_unlock(dev->ieee80211_ptr);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -1161,45 +1336,47 @@
static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
- u8 key_idx = 0;
u8 *mac_addr = NULL;
+ struct key_parse key;
- if (info->attrs[NL80211_ATTR_KEY_IDX])
- key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
-
- if (key_idx > 5)
- return -EINVAL;
+ err = nl80211_parse_key(info, &key);
+ if (err)
+ return err;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->del_key) {
+ if (!rdev->ops->del_key) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->del_key(&drv->wiphy, dev, key_idx, mac_addr);
+ wdev_lock(dev->ieee80211_ptr);
+ err = nl80211_key_allowed(dev->ieee80211_ptr);
+ if (!err)
+ err = rdev->ops->del_key(&rdev->wiphy, dev, key.idx, mac_addr);
#ifdef CONFIG_WIRELESS_EXT
if (!err) {
- if (key_idx == dev->ieee80211_ptr->wext.default_key)
+ if (key.idx == dev->ieee80211_ptr->wext.default_key)
dev->ieee80211_ptr->wext.default_key = -1;
- else if (key_idx == dev->ieee80211_ptr->wext.default_mgmt_key)
+ else if (key.idx == dev->ieee80211_ptr->wext.default_mgmt_key)
dev->ieee80211_ptr->wext.default_mgmt_key = -1;
}
#endif
+ wdev_unlock(dev->ieee80211_ptr);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
@@ -1212,7 +1389,7 @@
{
int (*call)(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *info);
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
struct beacon_parameters params;
@@ -1223,7 +1400,7 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
@@ -1242,10 +1419,10 @@
goto out;
}
- call = drv->ops->add_beacon;
+ call = rdev->ops->add_beacon;
break;
case NL80211_CMD_SET_BEACON:
- call = drv->ops->set_beacon;
+ call = rdev->ops->set_beacon;
break;
default:
WARN_ON(1);
@@ -1291,10 +1468,10 @@
goto out;
}
- err = call(&drv->wiphy, dev, ¶ms);
+ err = call(&rdev->wiphy, dev, ¶ms);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -1304,17 +1481,17 @@
static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->del_beacon) {
+ if (!rdev->ops->del_beacon) {
err = -EOPNOTSUPP;
goto out;
}
@@ -1323,10 +1500,10 @@
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->del_beacon(&drv->wiphy, dev);
+ err = rdev->ops->del_beacon(&rdev->wiphy, dev);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -1433,6 +1610,8 @@
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
+ NLA_PUT_U32(msg, NL80211_ATTR_GENERATION, sinfo->generation);
+
sinfoattr = nla_nest_start(msg, NL80211_ATTR_STA_INFO);
if (!sinfoattr)
goto nla_put_failure;
@@ -1520,13 +1699,13 @@
rtnl_lock();
- netdev = __dev_get_by_index(&init_net, ifidx);
+ netdev = __dev_get_by_index(sock_net(skb->sk), ifidx);
if (!netdev) {
err = -ENODEV;
goto out_rtnl;
}
- dev = cfg80211_get_dev_from_ifindex(ifidx);
+ dev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_rtnl;
@@ -1560,7 +1739,7 @@
cb->args[1] = sta_idx;
err = skb->len;
out_err:
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(dev);
out_rtnl:
rtnl_unlock();
@@ -1569,7 +1748,7 @@
static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
struct station_info sinfo;
@@ -1585,16 +1764,16 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->get_station) {
+ if (!rdev->ops->get_station) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->get_station(&drv->wiphy, dev, mac_addr, &sinfo);
+ err = rdev->ops->get_station(&rdev->wiphy, dev, mac_addr, &sinfo);
if (err)
goto out;
@@ -1606,13 +1785,13 @@
dev, mac_addr, &sinfo) < 0)
goto out_free;
- err = genlmsg_unicast(msg, info->snd_pid);
+ err = genlmsg_reply(msg, info);
goto out;
out_free:
nlmsg_free(msg);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -1623,14 +1802,16 @@
/*
* Get vlan interface making sure it is on the right wiphy.
*/
-static int get_vlan(struct nlattr *vlanattr,
+static int get_vlan(struct genl_info *info,
struct cfg80211_registered_device *rdev,
struct net_device **vlan)
{
+ struct nlattr *vlanattr = info->attrs[NL80211_ATTR_STA_VLAN];
*vlan = NULL;
if (vlanattr) {
- *vlan = dev_get_by_index(&init_net, nla_get_u32(vlanattr));
+ *vlan = dev_get_by_index(genl_info_net(info),
+ nla_get_u32(vlanattr));
if (!*vlan)
return -ENODEV;
if (!(*vlan)->ieee80211_ptr)
@@ -1643,7 +1824,7 @@
static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
struct station_parameters params;
@@ -1685,11 +1866,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
+ err = get_vlan(info, rdev, ¶ms.vlan);
if (err)
goto out;
@@ -1738,17 +1919,17 @@
if (err)
goto out;
- if (!drv->ops->change_station) {
+ if (!rdev->ops->change_station) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->change_station(&drv->wiphy, dev, mac_addr, ¶ms);
+ err = rdev->ops->change_station(&rdev->wiphy, dev, mac_addr, ¶ms);
out:
if (params.vlan)
dev_put(params.vlan);
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -1758,7 +1939,7 @@
static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
struct station_parameters params;
@@ -1798,11 +1979,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
+ err = get_vlan(info, rdev, ¶ms.vlan);
if (err)
goto out;
@@ -1838,7 +2019,7 @@
if (err)
goto out;
- if (!drv->ops->add_station) {
+ if (!rdev->ops->add_station) {
err = -EOPNOTSUPP;
goto out;
}
@@ -1848,12 +2029,12 @@
goto out;
}
- err = drv->ops->add_station(&drv->wiphy, dev, mac_addr, ¶ms);
+ err = rdev->ops->add_station(&rdev->wiphy, dev, mac_addr, ¶ms);
out:
if (params.vlan)
dev_put(params.vlan);
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -1863,7 +2044,7 @@
static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
u8 *mac_addr = NULL;
@@ -1873,7 +2054,7 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
@@ -1884,15 +2065,15 @@
goto out;
}
- if (!drv->ops->del_station) {
+ if (!rdev->ops->del_station) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->del_station(&drv->wiphy, dev, mac_addr);
+ err = rdev->ops->del_station(&rdev->wiphy, dev, mac_addr);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -1916,6 +2097,8 @@
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, dst);
NLA_PUT(msg, NL80211_ATTR_MPATH_NEXT_HOP, ETH_ALEN, next_hop);
+ NLA_PUT_U32(msg, NL80211_ATTR_GENERATION, pinfo->generation);
+
pinfoattr = nla_nest_start(msg, NL80211_ATTR_MPATH_INFO);
if (!pinfoattr)
goto nla_put_failure;
@@ -1979,13 +2162,13 @@
rtnl_lock();
- netdev = __dev_get_by_index(&init_net, ifidx);
+ netdev = __dev_get_by_index(sock_net(skb->sk), ifidx);
if (!netdev) {
err = -ENODEV;
goto out_rtnl;
}
- dev = cfg80211_get_dev_from_ifindex(ifidx);
+ dev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_rtnl;
@@ -1998,7 +2181,7 @@
if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
- goto out;
+ goto out_err;
}
while (1) {
@@ -2023,7 +2206,7 @@
cb->args[1] = path_idx;
err = skb->len;
out_err:
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(dev);
out_rtnl:
rtnl_unlock();
@@ -2032,7 +2215,7 @@
static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
struct mpath_info pinfo;
@@ -2049,11 +2232,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->get_mpath) {
+ if (!rdev->ops->get_mpath) {
err = -EOPNOTSUPP;
goto out;
}
@@ -2063,7 +2246,7 @@
goto out;
}
- err = drv->ops->get_mpath(&drv->wiphy, dev, dst, next_hop, &pinfo);
+ err = rdev->ops->get_mpath(&rdev->wiphy, dev, dst, next_hop, &pinfo);
if (err)
goto out;
@@ -2075,13 +2258,13 @@
dev, dst, next_hop, &pinfo) < 0)
goto out_free;
- err = genlmsg_unicast(msg, info->snd_pid);
+ err = genlmsg_reply(msg, info);
goto out;
out_free:
nlmsg_free(msg);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2091,7 +2274,7 @@
static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
u8 *dst = NULL;
@@ -2108,11 +2291,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->change_mpath) {
+ if (!rdev->ops->change_mpath) {
err = -EOPNOTSUPP;
goto out;
}
@@ -2127,10 +2310,10 @@
goto out;
}
- err = drv->ops->change_mpath(&drv->wiphy, dev, dst, next_hop);
+ err = rdev->ops->change_mpath(&rdev->wiphy, dev, dst, next_hop);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2139,7 +2322,7 @@
}
static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
u8 *dst = NULL;
@@ -2156,11 +2339,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->add_mpath) {
+ if (!rdev->ops->add_mpath) {
err = -EOPNOTSUPP;
goto out;
}
@@ -2175,10 +2358,10 @@
goto out;
}
- err = drv->ops->add_mpath(&drv->wiphy, dev, dst, next_hop);
+ err = rdev->ops->add_mpath(&rdev->wiphy, dev, dst, next_hop);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2188,7 +2371,7 @@
static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
u8 *dst = NULL;
@@ -2198,19 +2381,19 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->del_mpath) {
+ if (!rdev->ops->del_mpath) {
err = -EOPNOTSUPP;
goto out;
}
- err = drv->ops->del_mpath(&drv->wiphy, dev, dst);
+ err = rdev->ops->del_mpath(&rdev->wiphy, dev, dst);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2220,7 +2403,7 @@
static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
int err;
struct net_device *dev;
struct bss_parameters params;
@@ -2249,11 +2432,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->change_bss) {
+ if (!rdev->ops->change_bss) {
err = -EOPNOTSUPP;
goto out;
}
@@ -2263,10 +2446,10 @@
goto out;
}
- err = drv->ops->change_bss(&drv->wiphy, dev, ¶ms);
+ err = rdev->ops->change_bss(&rdev->wiphy, dev, ¶ms);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2357,7 +2540,7 @@
static int nl80211_get_mesh_params(struct sk_buff *skb,
struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct mesh_config cur_params;
int err;
struct net_device *dev;
@@ -2368,17 +2551,17 @@
rtnl_lock();
/* Look up our device */
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->get_mesh_params) {
+ if (!rdev->ops->get_mesh_params) {
err = -EOPNOTSUPP;
goto out;
}
/* Get the mesh params */
- err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
+ err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, &cur_params);
if (err)
goto out;
@@ -2424,7 +2607,7 @@
cur_params.dot11MeshHWMPnetDiameterTraversalTime);
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
- err = genlmsg_unicast(msg, info->snd_pid);
+ err = genlmsg_reply(msg, info);
goto out;
nla_put_failure:
@@ -2432,7 +2615,7 @@
err = -EMSGSIZE;
out:
/* Cleanup */
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2470,7 +2653,7 @@
{
int err;
u32 mask;
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
struct mesh_config cfg;
struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1];
@@ -2485,11 +2668,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- if (!drv->ops->set_mesh_params) {
+ if (!rdev->ops->set_mesh_params) {
err = -EOPNOTSUPP;
goto out;
}
@@ -2534,11 +2717,11 @@
nla_get_u16);
/* Apply changes */
- err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
+ err = rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask);
out:
/* cleanup */
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2612,7 +2795,7 @@
nla_nest_end(msg, nl_reg_rules);
genlmsg_end(msg, hdr);
- err = genlmsg_unicast(msg, info->snd_pid);
+ err = genlmsg_reply(msg, info);
goto out;
nla_put_failure:
@@ -2698,16 +2881,41 @@
return r;
}
+static int validate_scan_freqs(struct nlattr *freqs)
+{
+ struct nlattr *attr1, *attr2;
+ int n_channels = 0, tmp1, tmp2;
+
+ nla_for_each_nested(attr1, freqs, tmp1) {
+ n_channels++;
+ /*
+ * Some hardware has a limited channel list for
+ * scanning, and it is pretty much nonsensical
+ * to scan for a channel twice, so disallow that
+ * and don't require drivers to check that the
+ * channel list they get isn't longer than what
+ * they can scan, as long as they can scan all
+ * the channels they registered at once.
+ */
+ nla_for_each_nested(attr2, freqs, tmp2)
+ if (attr1 != attr2 &&
+ nla_get_u32(attr1) == nla_get_u32(attr2))
+ return 0;
+ }
+
+ return n_channels;
+}
+
static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
struct cfg80211_scan_request *request;
struct cfg80211_ssid *ssid;
struct ieee80211_channel *channel;
struct nlattr *attr;
struct wiphy *wiphy;
- int err, tmp, n_ssids = 0, n_channels = 0, i;
+ int err, tmp, n_ssids = 0, n_channels, i;
enum ieee80211_band band;
size_t ie_len;
@@ -2716,13 +2924,13 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto out_rtnl;
- wiphy = &drv->wiphy;
+ wiphy = &rdev->wiphy;
- if (!drv->ops->scan) {
+ if (!rdev->ops->scan) {
err = -EOPNOTSUPP;
goto out;
}
@@ -2732,19 +2940,21 @@
goto out;
}
- if (drv->scan_req) {
+ if (rdev->scan_req) {
err = -EBUSY;
goto out;
}
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
- nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp)
- n_channels++;
+ n_channels = validate_scan_freqs(
+ info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
if (!n_channels) {
err = -EINVAL;
goto out;
}
} else {
+ n_channels = 0;
+
for (band = 0; band < IEEE80211_NUM_BANDS; band++)
if (wiphy->bands[band])
n_channels += wiphy->bands[band]->n_channels;
@@ -2778,10 +2988,9 @@
goto out;
}
- request->channels = (void *)((char *)request + sizeof(*request));
request->n_channels = n_channels;
if (n_ssids)
- request->ssids = (void *)(request->channels + n_channels);
+ request->ssids = (void *)&request->channels[n_channels];
request->n_ssids = n_ssids;
if (ie_len) {
if (request->ssids)
@@ -2836,19 +3045,24 @@
request->ie_len);
}
- request->ifidx = dev->ifindex;
- request->wiphy = &drv->wiphy;
+ request->dev = dev;
+ request->wiphy = &rdev->wiphy;
- drv->scan_req = request;
- err = drv->ops->scan(&drv->wiphy, dev, request);
+ rdev->scan_req = request;
+ err = rdev->ops->scan(&rdev->wiphy, dev, request);
+
+ if (!err) {
+ nl80211_send_scan_start(rdev, dev);
+ dev_hold(dev);
+ }
out_free:
if (err) {
- drv->scan_req = NULL;
+ rdev->scan_req = NULL;
kfree(request);
}
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
out_rtnl:
rtnl_unlock();
@@ -2858,20 +3072,23 @@
static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *rdev,
- struct net_device *dev,
- struct cfg80211_bss *res)
+ struct wireless_dev *wdev,
+ struct cfg80211_internal_bss *intbss)
{
+ struct cfg80211_bss *res = &intbss->pub;
void *hdr;
struct nlattr *bss;
+ int i;
+
+ ASSERT_WDEV_LOCK(wdev);
hdr = nl80211hdr_put(msg, pid, seq, flags,
NL80211_CMD_NEW_SCAN_RESULTS);
if (!hdr)
return -1;
- NLA_PUT_U32(msg, NL80211_ATTR_SCAN_GENERATION,
- rdev->bss_generation);
- NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+ NLA_PUT_U32(msg, NL80211_ATTR_GENERATION, rdev->bss_generation);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, wdev->netdev->ifindex);
bss = nla_nest_start(msg, NL80211_ATTR_BSS);
if (!bss)
@@ -2900,6 +3117,28 @@
break;
}
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ if (intbss == wdev->current_bss)
+ NLA_PUT_U32(msg, NL80211_BSS_STATUS,
+ NL80211_BSS_STATUS_ASSOCIATED);
+ else for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (intbss != wdev->auth_bsses[i])
+ continue;
+ NLA_PUT_U32(msg, NL80211_BSS_STATUS,
+ NL80211_BSS_STATUS_AUTHENTICATED);
+ break;
+ }
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ if (intbss == wdev->current_bss)
+ NLA_PUT_U32(msg, NL80211_BSS_STATUS,
+ NL80211_BSS_STATUS_IBSS_JOINED);
+ break;
+ default:
+ break;
+ }
+
nla_nest_end(msg, bss);
return genlmsg_end(msg, hdr);
@@ -2912,9 +3151,10 @@
static int nl80211_dump_scan(struct sk_buff *skb,
struct netlink_callback *cb)
{
- struct cfg80211_registered_device *dev;
- struct net_device *netdev;
+ struct cfg80211_registered_device *rdev;
+ struct net_device *dev;
struct cfg80211_internal_bss *scan;
+ struct wireless_dev *wdev;
int ifidx = cb->args[0];
int start = cb->args[1], idx = 0;
int err;
@@ -2935,58 +3175,83 @@
cb->args[0] = ifidx;
}
- netdev = dev_get_by_index(&init_net, ifidx);
- if (!netdev)
+ dev = dev_get_by_index(sock_net(skb->sk), ifidx);
+ if (!dev)
return -ENODEV;
- dev = cfg80211_get_dev_from_ifindex(ifidx);
- if (IS_ERR(dev)) {
- err = PTR_ERR(dev);
+ rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
goto out_put_netdev;
}
- spin_lock_bh(&dev->bss_lock);
- cfg80211_bss_expire(dev);
+ wdev = dev->ieee80211_ptr;
- list_for_each_entry(scan, &dev->bss_list, list) {
+ wdev_lock(wdev);
+ spin_lock_bh(&rdev->bss_lock);
+ cfg80211_bss_expire(rdev);
+
+ list_for_each_entry(scan, &rdev->bss_list, list) {
if (++idx <= start)
continue;
if (nl80211_send_bss(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
- dev, netdev, &scan->pub) < 0) {
+ rdev, wdev, scan) < 0) {
idx--;
goto out;
}
}
out:
- spin_unlock_bh(&dev->bss_lock);
+ spin_unlock_bh(&rdev->bss_lock);
+ wdev_unlock(wdev);
cb->args[1] = idx;
err = skb->len;
- cfg80211_put_dev(dev);
+ cfg80211_unlock_rdev(rdev);
out_put_netdev:
- dev_put(netdev);
+ dev_put(dev);
return err;
}
static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type)
{
- return auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM ||
- auth_type == NL80211_AUTHTYPE_SHARED_KEY ||
- auth_type == NL80211_AUTHTYPE_FT ||
- auth_type == NL80211_AUTHTYPE_NETWORK_EAP;
+ return auth_type <= NL80211_AUTHTYPE_MAX;
}
+static bool nl80211_valid_wpa_versions(u32 wpa_versions)
+{
+ return !(wpa_versions & ~(NL80211_WPA_VERSION_1 |
+ NL80211_WPA_VERSION_2));
+}
+
+static bool nl80211_valid_akm_suite(u32 akm)
+{
+ return akm == WLAN_AKM_SUITE_8021X ||
+ akm == WLAN_AKM_SUITE_PSK;
+}
+
+static bool nl80211_valid_cipher_suite(u32 cipher)
+{
+ return cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ cipher == WLAN_CIPHER_SUITE_WEP104 ||
+ cipher == WLAN_CIPHER_SUITE_TKIP ||
+ cipher == WLAN_CIPHER_SUITE_CCMP ||
+ cipher == WLAN_CIPHER_SUITE_AES_CMAC;
+}
+
+
static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
- struct cfg80211_auth_request req;
- struct wiphy *wiphy;
- int err;
+ struct ieee80211_channel *chan;
+ const u8 *bssid, *ssid, *ie = NULL;
+ int err, ssid_len, ie_len = 0;
+ enum nl80211_auth_type auth_type;
+ struct key_parse key;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
@@ -2997,13 +3262,38 @@
if (!info->attrs[NL80211_ATTR_AUTH_TYPE])
return -EINVAL;
+ if (!info->attrs[NL80211_ATTR_SSID])
+ return -EINVAL;
+
+ if (!info->attrs[NL80211_ATTR_WIPHY_FREQ])
+ return -EINVAL;
+
+ err = nl80211_parse_key(info, &key);
+ if (err)
+ return err;
+
+ if (key.idx >= 0) {
+ if (!key.p.key || !key.p.key_len)
+ return -EINVAL;
+ if ((key.p.cipher != WLAN_CIPHER_SUITE_WEP40 ||
+ key.p.key_len != WLAN_KEY_LEN_WEP40) &&
+ (key.p.cipher != WLAN_CIPHER_SUITE_WEP104 ||
+ key.p.key_len != WLAN_KEY_LEN_WEP104))
+ return -EINVAL;
+ if (key.idx > 4)
+ return -EINVAL;
+ } else {
+ key.p.key_len = 0;
+ key.p.key = NULL;
+ }
+
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->auth) {
+ if (!rdev->ops->auth) {
err = -EOPNOTSUPP;
goto out;
}
@@ -3018,69 +3308,130 @@
goto out;
}
- wiphy = &drv->wiphy;
- memset(&req, 0, sizeof(req));
-
- req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
-
- if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
- req.chan = ieee80211_get_channel(
- wiphy,
- nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
- if (!req.chan) {
- err = -EINVAL;
- goto out;
- }
- }
-
- if (info->attrs[NL80211_ATTR_SSID]) {
- req.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
- req.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
- }
-
- if (info->attrs[NL80211_ATTR_IE]) {
- req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
- req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
- }
-
- req.auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
- if (!nl80211_valid_auth_type(req.auth_type)) {
+ bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ chan = ieee80211_get_channel(&rdev->wiphy,
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (!chan || (chan->flags & IEEE80211_CHAN_DISABLED)) {
err = -EINVAL;
goto out;
}
- err = drv->ops->auth(&drv->wiphy, dev, &req);
+ ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
+ ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
+
+ if (info->attrs[NL80211_ATTR_IE]) {
+ ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+ ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ }
+
+ auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
+ if (!nl80211_valid_auth_type(auth_type)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = cfg80211_mlme_auth(rdev, dev, chan, auth_type, bssid,
+ ssid, ssid_len, ie, ie_len,
+ key.p.key, key.p.key_len, key.idx);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
+static int nl80211_crypto_settings(struct genl_info *info,
+ struct cfg80211_crypto_settings *settings,
+ int cipher_limit)
+{
+ memset(settings, 0, sizeof(*settings));
+
+ settings->control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
+
+ if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) {
+ void *data;
+ int len, i;
+
+ data = nla_data(info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]);
+ len = nla_len(info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]);
+ settings->n_ciphers_pairwise = len / sizeof(u32);
+
+ if (len % sizeof(u32))
+ return -EINVAL;
+
+ if (settings->n_ciphers_pairwise > cipher_limit)
+ return -EINVAL;
+
+ memcpy(settings->ciphers_pairwise, data, len);
+
+ for (i = 0; i < settings->n_ciphers_pairwise; i++)
+ if (!nl80211_valid_cipher_suite(
+ settings->ciphers_pairwise[i]))
+ return -EINVAL;
+ }
+
+ if (info->attrs[NL80211_ATTR_CIPHER_SUITE_GROUP]) {
+ settings->cipher_group =
+ nla_get_u32(info->attrs[NL80211_ATTR_CIPHER_SUITE_GROUP]);
+ if (!nl80211_valid_cipher_suite(settings->cipher_group))
+ return -EINVAL;
+ }
+
+ if (info->attrs[NL80211_ATTR_WPA_VERSIONS]) {
+ settings->wpa_versions =
+ nla_get_u32(info->attrs[NL80211_ATTR_WPA_VERSIONS]);
+ if (!nl80211_valid_wpa_versions(settings->wpa_versions))
+ return -EINVAL;
+ }
+
+ if (info->attrs[NL80211_ATTR_AKM_SUITES]) {
+ void *data;
+ int len, i;
+
+ data = nla_data(info->attrs[NL80211_ATTR_AKM_SUITES]);
+ len = nla_len(info->attrs[NL80211_ATTR_AKM_SUITES]);
+ settings->n_akm_suites = len / sizeof(u32);
+
+ if (len % sizeof(u32))
+ return -EINVAL;
+
+ memcpy(settings->akm_suites, data, len);
+
+ for (i = 0; i < settings->n_ciphers_pairwise; i++)
+ if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
- struct cfg80211_assoc_request req;
- struct wiphy *wiphy;
- int err;
+ struct cfg80211_crypto_settings crypto;
+ struct ieee80211_channel *chan, *fixedchan;
+ const u8 *bssid, *ssid, *ie = NULL, *prev_bssid = NULL;
+ int err, ssid_len, ie_len = 0;
+ bool use_mfp = false;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC] ||
- !info->attrs[NL80211_ATTR_SSID])
+ !info->attrs[NL80211_ATTR_SSID] ||
+ !info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->assoc) {
+ if (!rdev->ops->assoc) {
err = -EOPNOTSUPP;
goto out;
}
@@ -3095,46 +3446,54 @@
goto out;
}
- wiphy = &drv->wiphy;
- memset(&req, 0, sizeof(req));
+ bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
-
- if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
- req.chan = ieee80211_get_channel(
- wiphy,
- nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
- if (!req.chan) {
- err = -EINVAL;
- goto out;
- }
+ chan = ieee80211_get_channel(&rdev->wiphy,
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (!chan || (chan->flags & IEEE80211_CHAN_DISABLED)) {
+ err = -EINVAL;
+ goto out;
}
- req.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
- req.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
+ mutex_lock(&rdev->devlist_mtx);
+ fixedchan = rdev_fixed_channel(rdev, NULL);
+ if (fixedchan && chan != fixedchan) {
+ err = -EBUSY;
+ mutex_unlock(&rdev->devlist_mtx);
+ goto out;
+ }
+ mutex_unlock(&rdev->devlist_mtx);
+
+ ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
+ ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
if (info->attrs[NL80211_ATTR_IE]) {
- req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
- req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+ ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
if (info->attrs[NL80211_ATTR_USE_MFP]) {
- enum nl80211_mfp use_mfp =
+ enum nl80211_mfp mfp =
nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]);
- if (use_mfp == NL80211_MFP_REQUIRED)
- req.use_mfp = true;
- else if (use_mfp != NL80211_MFP_NO) {
+ if (mfp == NL80211_MFP_REQUIRED)
+ use_mfp = true;
+ else if (mfp != NL80211_MFP_NO) {
err = -EINVAL;
goto out;
}
}
- req.control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
+ if (info->attrs[NL80211_ATTR_PREV_BSSID])
+ prev_bssid = nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]);
- err = drv->ops->assoc(&drv->wiphy, dev, &req);
+ err = nl80211_crypto_settings(info, &crypto, 1);
+ if (!err)
+ err = cfg80211_mlme_assoc(rdev, dev, chan, bssid, prev_bssid,
+ ssid, ssid_len, ie, ie_len, use_mfp,
+ &crypto);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -3143,11 +3502,11 @@
static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
- struct cfg80211_deauth_request req;
- struct wiphy *wiphy;
- int err;
+ const u8 *ie = NULL, *bssid;
+ int err, ie_len = 0;
+ u16 reason_code;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
@@ -3160,11 +3519,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->deauth) {
+ if (!rdev->ops->deauth) {
err = -EOPNOTSUPP;
goto out;
}
@@ -3179,27 +3538,24 @@
goto out;
}
- wiphy = &drv->wiphy;
- memset(&req, 0, sizeof(req));
+ bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
-
- req.reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
- if (req.reason_code == 0) {
+ reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+ if (reason_code == 0) {
/* Reason Code 0 is reserved */
err = -EINVAL;
goto out;
}
if (info->attrs[NL80211_ATTR_IE]) {
- req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
- req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+ ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
- err = drv->ops->deauth(&drv->wiphy, dev, &req);
+ err = cfg80211_mlme_deauth(rdev, dev, bssid, ie, ie_len, reason_code);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -3208,11 +3564,11 @@
static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
- struct cfg80211_disassoc_request req;
- struct wiphy *wiphy;
- int err;
+ const u8 *ie = NULL, *bssid;
+ int err, ie_len = 0;
+ u16 reason_code;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
@@ -3225,11 +3581,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->disassoc) {
+ if (!rdev->ops->disassoc) {
err = -EOPNOTSUPP;
goto out;
}
@@ -3244,27 +3600,24 @@
goto out;
}
- wiphy = &drv->wiphy;
- memset(&req, 0, sizeof(req));
+ bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- req.peer_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
-
- req.reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
- if (req.reason_code == 0) {
+ reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+ if (reason_code == 0) {
/* Reason Code 0 is reserved */
err = -EINVAL;
goto out;
}
if (info->attrs[NL80211_ATTR_IE]) {
- req.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
- req.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+ ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
- err = drv->ops->disassoc(&drv->wiphy, dev, &req);
+ err = cfg80211_mlme_disassoc(rdev, dev, bssid, ie, ie_len, reason_code);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
@@ -3273,10 +3626,11 @@
static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
struct cfg80211_ibss_params ibss;
struct wiphy *wiphy;
+ struct cfg80211_cached_keys *connkeys = NULL;
int err;
memset(&ibss, 0, sizeof(ibss));
@@ -3300,11 +3654,11 @@
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->join_ibss) {
+ if (!rdev->ops->join_ibss) {
err = -EOPNOTSUPP;
goto out;
}
@@ -3319,7 +3673,7 @@
goto out;
}
- wiphy = &drv->wiphy;
+ wiphy = &rdev->wiphy;
if (info->attrs[NL80211_ATTR_MAC])
ibss.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
@@ -3341,30 +3695,43 @@
}
ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
+ ibss.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
- err = cfg80211_join_ibss(drv, dev, &ibss);
+ if (ibss.privacy && info->attrs[NL80211_ATTR_KEYS]) {
+ connkeys = nl80211_parse_connkeys(rdev,
+ info->attrs[NL80211_ATTR_KEYS]);
+ if (IS_ERR(connkeys)) {
+ err = PTR_ERR(connkeys);
+ connkeys = NULL;
+ goto out;
+ }
+ }
+
+ err = cfg80211_join_ibss(rdev, dev, &ibss, connkeys);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
+ if (err)
+ kfree(connkeys);
rtnl_unlock();
return err;
}
static int nl80211_leave_ibss(struct sk_buff *skb, struct genl_info *info)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct net_device *dev;
int err;
rtnl_lock();
- err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
if (err)
goto unlock_rtnl;
- if (!drv->ops->leave_ibss) {
+ if (!rdev->ops->leave_ibss) {
err = -EOPNOTSUPP;
goto out;
}
@@ -3379,16 +3746,313 @@
goto out;
}
- err = cfg80211_leave_ibss(drv, dev, false);
+ err = cfg80211_leave_ibss(rdev, dev, false);
out:
- cfg80211_put_dev(drv);
+ cfg80211_unlock_rdev(rdev);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
+#ifdef CONFIG_NL80211_TESTMODE
+static struct genl_multicast_group nl80211_testmode_mcgrp = {
+ .name = "testmode",
+};
+
+static int nl80211_testmode_do(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ int err;
+
+ if (!info->attrs[NL80211_ATTR_TESTDATA])
+ return -EINVAL;
+
+ rtnl_lock();
+
+ rdev = cfg80211_get_dev_from_info(info);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
+ goto unlock_rtnl;
+ }
+
+ err = -EOPNOTSUPP;
+ if (rdev->ops->testmode_cmd) {
+ rdev->testmode_info = info;
+ err = rdev->ops->testmode_cmd(&rdev->wiphy,
+ nla_data(info->attrs[NL80211_ATTR_TESTDATA]),
+ nla_len(info->attrs[NL80211_ATTR_TESTDATA]));
+ rdev->testmode_info = NULL;
+ }
+
+ cfg80211_unlock_rdev(rdev);
+
+ unlock_rtnl:
+ rtnl_unlock();
+ return err;
+}
+
+static struct sk_buff *
+__cfg80211_testmode_alloc_skb(struct cfg80211_registered_device *rdev,
+ int approxlen, u32 pid, u32 seq, gfp_t gfp)
+{
+ struct sk_buff *skb;
+ void *hdr;
+ struct nlattr *data;
+
+ skb = nlmsg_new(approxlen + 100, gfp);
+ if (!skb)
+ return NULL;
+
+ hdr = nl80211hdr_put(skb, pid, seq, 0, NL80211_CMD_TESTMODE);
+ if (!hdr) {
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ NLA_PUT_U32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ data = nla_nest_start(skb, NL80211_ATTR_TESTDATA);
+
+ ((void **)skb->cb)[0] = rdev;
+ ((void **)skb->cb)[1] = hdr;
+ ((void **)skb->cb)[2] = data;
+
+ return skb;
+
+ nla_put_failure:
+ kfree_skb(skb);
+ return NULL;
+}
+
+struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
+ int approxlen)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ if (WARN_ON(!rdev->testmode_info))
+ return NULL;
+
+ return __cfg80211_testmode_alloc_skb(rdev, approxlen,
+ rdev->testmode_info->snd_pid,
+ rdev->testmode_info->snd_seq,
+ GFP_KERNEL);
+}
+EXPORT_SYMBOL(cfg80211_testmode_alloc_reply_skb);
+
+int cfg80211_testmode_reply(struct sk_buff *skb)
+{
+ struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
+ void *hdr = ((void **)skb->cb)[1];
+ struct nlattr *data = ((void **)skb->cb)[2];
+
+ if (WARN_ON(!rdev->testmode_info)) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ nla_nest_end(skb, data);
+ genlmsg_end(skb, hdr);
+ return genlmsg_reply(skb, rdev->testmode_info);
+}
+EXPORT_SYMBOL(cfg80211_testmode_reply);
+
+struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
+ int approxlen, gfp_t gfp)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ return __cfg80211_testmode_alloc_skb(rdev, approxlen, 0, 0, gfp);
+}
+EXPORT_SYMBOL(cfg80211_testmode_alloc_event_skb);
+
+void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
+{
+ void *hdr = ((void **)skb->cb)[1];
+ struct nlattr *data = ((void **)skb->cb)[2];
+
+ nla_nest_end(skb, data);
+ genlmsg_end(skb, hdr);
+ genlmsg_multicast(skb, 0, nl80211_testmode_mcgrp.id, gfp);
+}
+EXPORT_SYMBOL(cfg80211_testmode_event);
+#endif
+
+static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ struct net_device *dev;
+ struct cfg80211_connect_params connect;
+ struct wiphy *wiphy;
+ struct cfg80211_cached_keys *connkeys = NULL;
+ int err;
+
+ memset(&connect, 0, sizeof(connect));
+
+ if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+ return -EINVAL;
+
+ if (!info->attrs[NL80211_ATTR_SSID] ||
+ !nla_len(info->attrs[NL80211_ATTR_SSID]))
+ return -EINVAL;
+
+ if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
+ connect.auth_type =
+ nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
+ if (!nl80211_valid_auth_type(connect.auth_type))
+ return -EINVAL;
+ } else
+ connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+
+ connect.privacy = info->attrs[NL80211_ATTR_PRIVACY];
+
+ err = nl80211_crypto_settings(info, &connect.crypto,
+ NL80211_MAX_NR_CIPHER_SUITES);
+ if (err)
+ return err;
+ rtnl_lock();
+
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+ if (err)
+ goto unlock_rtnl;
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ wiphy = &rdev->wiphy;
+
+ if (info->attrs[NL80211_ATTR_MAC])
+ connect.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ connect.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
+ connect.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
+
+ if (info->attrs[NL80211_ATTR_IE]) {
+ connect.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+ connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+ }
+
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
+ connect.channel =
+ ieee80211_get_channel(wiphy,
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (!connect.channel ||
+ connect.channel->flags & IEEE80211_CHAN_DISABLED) {
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
+ if (connect.privacy && info->attrs[NL80211_ATTR_KEYS]) {
+ connkeys = nl80211_parse_connkeys(rdev,
+ info->attrs[NL80211_ATTR_KEYS]);
+ if (IS_ERR(connkeys)) {
+ err = PTR_ERR(connkeys);
+ connkeys = NULL;
+ goto out;
+ }
+ }
+
+ err = cfg80211_connect(rdev, dev, &connect, connkeys);
+
+out:
+ cfg80211_unlock_rdev(rdev);
+ dev_put(dev);
+unlock_rtnl:
+ if (err)
+ kfree(connkeys);
+ rtnl_unlock();
+ return err;
+}
+
+static int nl80211_disconnect(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ struct net_device *dev;
+ int err;
+ u16 reason;
+
+ if (!info->attrs[NL80211_ATTR_REASON_CODE])
+ reason = WLAN_REASON_DEAUTH_LEAVING;
+ else
+ reason = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
+
+ if (reason == 0)
+ return -EINVAL;
+
+ rtnl_lock();
+
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+ if (err)
+ goto unlock_rtnl;
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ err = cfg80211_disconnect(rdev, dev, reason, true);
+
+out:
+ cfg80211_unlock_rdev(rdev);
+ dev_put(dev);
+unlock_rtnl:
+ rtnl_unlock();
+ return err;
+}
+
+static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev;
+ struct net *net;
+ int err;
+ u32 pid;
+
+ if (!info->attrs[NL80211_ATTR_PID])
+ return -EINVAL;
+
+ pid = nla_get_u32(info->attrs[NL80211_ATTR_PID]);
+
+ rtnl_lock();
+
+ rdev = cfg80211_get_dev_from_info(info);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
+ goto out;
+ }
+
+ net = get_net_ns_by_pid(pid);
+ if (IS_ERR(net)) {
+ err = PTR_ERR(net);
+ goto out;
+ }
+
+ err = 0;
+
+ /* check if anything to do */
+ if (net_eq(wiphy_net(&rdev->wiphy), net))
+ goto out_put_net;
+
+ err = cfg80211_switch_netns(rdev, net);
+ out_put_net:
+ put_net(net);
+ out:
+ cfg80211_unlock_rdev(rdev);
+ rtnl_unlock();
+ return err;
+}
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
@@ -3602,6 +4266,32 @@
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+#ifdef CONFIG_NL80211_TESTMODE
+ {
+ .cmd = NL80211_CMD_TESTMODE,
+ .doit = nl80211_testmode_do,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+#endif
+ {
+ .cmd = NL80211_CMD_CONNECT,
+ .doit = nl80211_connect,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = NL80211_CMD_DISCONNECT,
+ .doit = nl80211_disconnect,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = NL80211_CMD_SET_WIPHY_NETNS,
+ .doit = nl80211_wiphy_netns,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
.name = "mlme",
@@ -3633,7 +4323,8 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_config_mcgrp.id, GFP_KERNEL);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_config_mcgrp.id, GFP_KERNEL);
}
static int nl80211_add_scan_req(struct sk_buff *msg,
@@ -3643,6 +4334,8 @@
struct nlattr *nest;
int i;
+ ASSERT_RDEV_LOCK(rdev);
+
if (WARN_ON(!req))
return 0;
@@ -3668,11 +4361,11 @@
return -ENOBUFS;
}
-static int nl80211_send_scan_donemsg(struct sk_buff *msg,
- struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- u32 pid, u32 seq, int flags,
- u32 cmd)
+static int nl80211_send_scan_msg(struct sk_buff *msg,
+ struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ u32 pid, u32 seq, int flags,
+ u32 cmd)
{
void *hdr;
@@ -3693,6 +4386,25 @@
return -EMSGSIZE;
}
+void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev)
+{
+ struct sk_buff *msg;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg)
+ return;
+
+ if (nl80211_send_scan_msg(msg, rdev, netdev, 0, 0, 0,
+ NL80211_CMD_TRIGGER_SCAN) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_scan_mcgrp.id, GFP_KERNEL);
+}
+
void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
struct net_device *netdev)
{
@@ -3702,13 +4414,14 @@
if (!msg)
return;
- if (nl80211_send_scan_donemsg(msg, rdev, netdev, 0, 0, 0,
- NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
+ if (nl80211_send_scan_msg(msg, rdev, netdev, 0, 0, 0,
+ NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
nlmsg_free(msg);
return;
}
- genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_scan_mcgrp.id, GFP_KERNEL);
}
void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
@@ -3720,13 +4433,14 @@
if (!msg)
return;
- if (nl80211_send_scan_donemsg(msg, rdev, netdev, 0, 0, 0,
- NL80211_CMD_SCAN_ABORTED) < 0) {
+ if (nl80211_send_scan_msg(msg, rdev, netdev, 0, 0, 0,
+ NL80211_CMD_SCAN_ABORTED) < 0) {
nlmsg_free(msg);
return;
}
- genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_scan_mcgrp.id, GFP_KERNEL);
}
/*
@@ -3775,7 +4489,10 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_KERNEL);
+ rcu_read_lock();
+ genlmsg_multicast_allns(msg, 0, nl80211_regulatory_mcgrp.id,
+ GFP_ATOMIC);
+ rcu_read_unlock();
return;
@@ -3787,12 +4504,12 @@
static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
const u8 *buf, size_t len,
- enum nl80211_commands cmd)
+ enum nl80211_commands cmd, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
@@ -3811,7 +4528,8 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
@@ -3820,42 +4538,45 @@
}
void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, const u8 *buf, size_t len)
+ struct net_device *netdev, const u8 *buf,
+ size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
- NL80211_CMD_AUTHENTICATE);
+ NL80211_CMD_AUTHENTICATE, gfp);
}
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
- size_t len)
+ size_t len, gfp_t gfp)
{
- nl80211_send_mlme_event(rdev, netdev, buf, len, NL80211_CMD_ASSOCIATE);
+ nl80211_send_mlme_event(rdev, netdev, buf, len,
+ NL80211_CMD_ASSOCIATE, gfp);
}
void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, const u8 *buf, size_t len)
+ struct net_device *netdev, const u8 *buf,
+ size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
- NL80211_CMD_DEAUTHENTICATE);
+ NL80211_CMD_DEAUTHENTICATE, gfp);
}
void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
- size_t len)
+ size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
- NL80211_CMD_DISASSOCIATE);
+ NL80211_CMD_DISASSOCIATE, gfp);
}
static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, int cmd,
- const u8 *addr)
+ const u8 *addr, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
@@ -3875,7 +4596,8 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
@@ -3884,16 +4606,145 @@
}
void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, const u8 *addr)
+ struct net_device *netdev, const u8 *addr,
+ gfp_t gfp)
{
nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_AUTHENTICATE,
- addr);
+ addr, gfp);
}
void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, const u8 *addr)
+ struct net_device *netdev, const u8 *addr,
+ gfp_t gfp)
{
- nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_ASSOCIATE, addr);
+ nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_ASSOCIATE,
+ addr, gfp);
+}
+
+void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len,
+ u16 status, gfp_t gfp)
+{
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_CONNECT);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+ if (bssid)
+ NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
+ NLA_PUT_U16(msg, NL80211_ATTR_STATUS_CODE, status);
+ if (req_ie)
+ NLA_PUT(msg, NL80211_ATTR_REQ_IE, req_ie_len, req_ie);
+ if (resp_ie)
+ NLA_PUT(msg, NL80211_ATTR_RESP_IE, resp_ie_len, resp_ie);
+
+ if (genlmsg_end(msg, hdr) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+
+}
+
+void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp)
+{
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_ROAM);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+ NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
+ if (req_ie)
+ NLA_PUT(msg, NL80211_ATTR_REQ_IE, req_ie_len, req_ie);
+ if (resp_ie)
+ NLA_PUT(msg, NL80211_ATTR_RESP_IE, resp_ie_len, resp_ie);
+
+ if (genlmsg_end(msg, hdr) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+
+}
+
+void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u16 reason,
+ const u8 *ie, size_t ie_len, bool from_ap)
+{
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_DISCONNECT);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+ if (from_ap && reason)
+ NLA_PUT_U16(msg, NL80211_ATTR_REASON_CODE, reason);
+ if (from_ap)
+ NLA_PUT_FLAG(msg, NL80211_ATTR_DISCONNECTED_BY_AP);
+ if (ie)
+ NLA_PUT(msg, NL80211_ATTR_IE, ie_len, ie);
+
+ if (genlmsg_end(msg, hdr) < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, GFP_KERNEL);
+ return;
+
+ nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ nlmsg_free(msg);
+
}
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
@@ -3922,7 +4773,8 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
@@ -3933,12 +4785,12 @@
void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type, int key_id,
- const u8 *tsc)
+ const u8 *tsc, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
@@ -3962,7 +4814,8 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
@@ -4015,7 +4868,10 @@
return;
}
- genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_ATOMIC);
+ rcu_read_lock();
+ genlmsg_multicast_allns(msg, 0, nl80211_regulatory_mcgrp.id,
+ GFP_ATOMIC);
+ rcu_read_unlock();
return;
@@ -4051,6 +4907,12 @@
if (err)
goto err_out;
+#ifdef CONFIG_NL80211_TESTMODE
+ err = genl_register_mc_group(&nl80211_fam, &nl80211_testmode_mcgrp);
+ if (err)
+ goto err_out;
+#endif
+
return 0;
err_out:
genl_unregister_family(&nl80211_fam);
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index 5c12ad1..44cc2a7 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -3,39 +3,54 @@
#include "core.h"
-extern int nl80211_init(void);
-extern void nl80211_exit(void);
-extern void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev);
-extern void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
- struct net_device *netdev);
-extern void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
- struct net_device *netdev);
-extern void nl80211_send_reg_change_event(struct regulatory_request *request);
-extern void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- const u8 *buf, size_t len);
-extern void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- const u8 *buf, size_t len);
-extern void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
+int nl80211_init(void);
+void nl80211_exit(void);
+void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev);
+void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev);
+void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev);
+void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev);
+void nl80211_send_reg_change_event(struct regulatory_request *request);
+void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev,
+ const u8 *addr, gfp_t gfp);
+void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
- const u8 *buf, size_t len);
-extern void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- const u8 *buf, size_t len);
-extern void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- const u8 *addr);
-extern void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- const u8 *addr);
-extern void
+ const u8 *addr, gfp_t gfp);
+void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len,
+ u16 status, gfp_t gfp);
+void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u16 reason,
+ const u8 *ie, size_t ie_len, bool from_ap);
+
+void
nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type,
- int key_id, const u8 *tsc);
+ int key_id, const u8 *tsc, gfp_t gfp);
-extern void
+void
nl80211_send_beacon_hint_event(struct wiphy *wiphy,
struct ieee80211_channel *channel_before,
struct ieee80211_channel *channel_after);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 75a406d..f256dff 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -62,6 +62,16 @@
*/
static const struct ieee80211_regdomain *country_ie_regdomain;
+/*
+ * Protects static reg.c components:
+ * - cfg80211_world_regdom
+ * - cfg80211_regdom
+ * - country_ie_regdomain
+ * - last_request
+ */
+DEFINE_MUTEX(reg_mutex);
+#define assert_reg_lock() WARN_ON(!mutex_is_locked(®_mutex))
+
/* Used to queue up regulatory hints */
static LIST_HEAD(reg_requests_list);
static spinlock_t reg_requests_lock;
@@ -113,11 +123,7 @@
static const struct ieee80211_regdomain *cfg80211_world_regdom =
&world_regdom;
-#ifdef CONFIG_WIRELESS_OLD_REGULATORY
-static char *ieee80211_regdom = "US";
-#else
static char *ieee80211_regdom = "00";
-#endif
module_param(ieee80211_regdom, charp, 0444);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
@@ -1012,7 +1018,6 @@
map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
return;
@@ -1021,7 +1026,6 @@
chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = min(chan->orig_mag,
(int) MBI_TO_DBI(power_rule->max_antenna_gain));
- chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
if (chan->orig_mpwr)
chan->max_power = min(chan->orig_mpwr,
(int) MBM_TO_DBM(power_rule->max_eirp));
@@ -1061,10 +1065,10 @@
static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
- list_for_each_entry(drv, &cfg80211_drv_list, list)
- wiphy_update_regulatory(&drv->wiphy, initiator);
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list)
+ wiphy_update_regulatory(&rdev->wiphy, initiator);
}
static void handle_reg_beacon(struct wiphy *wiphy,
@@ -1298,7 +1302,7 @@
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
- assert_cfg80211_lock();
+ assert_reg_lock();
sband = wiphy->bands[band];
BUG_ON(chan_idx >= sband->n_channels);
@@ -1323,7 +1327,6 @@
chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
}
@@ -1347,14 +1350,14 @@
enum ieee80211_band band;
unsigned int bands_set = 0;
- mutex_lock(&cfg80211_mutex);
+ mutex_lock(®_mutex);
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!wiphy->bands[band])
continue;
handle_band_custom(wiphy, band, regd);
bands_set++;
}
- mutex_unlock(&cfg80211_mutex);
+ mutex_unlock(®_mutex);
/*
* no point in calling this if it won't have any effect
@@ -1421,7 +1424,7 @@
if (last_wiphy != wiphy) {
/*
* Two cards with two APs claiming different
- * different Country IE alpha2s. We could
+ * Country IE alpha2s. We could
* intersect them, but that seems unlikely
* to be correct. Reject second one for now.
*/
@@ -1500,7 +1503,7 @@
* Returns zero if all went fine, %-EALREADY if a regulatory domain had
* already been set or other standard error codes.
*
- * Caller must hold &cfg80211_mutex
+ * Caller must hold &cfg80211_mutex and ®_mutex
*/
static int __regulatory_hint(struct wiphy *wiphy,
struct regulatory_request *pending_request)
@@ -1575,6 +1578,7 @@
BUG_ON(!reg_request->alpha2);
mutex_lock(&cfg80211_mutex);
+ mutex_lock(®_mutex);
if (wiphy_idx_valid(reg_request->wiphy_idx))
wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx);
@@ -1590,6 +1594,7 @@
if (r == -EALREADY && wiphy && wiphy->strict_regulatory)
wiphy_update_regulatory(wiphy, reg_request->initiator);
out:
+ mutex_unlock(®_mutex);
mutex_unlock(&cfg80211_mutex);
}
@@ -1615,9 +1620,13 @@
/* Processes beacon hints -- this has nothing to do with country IEs */
static void reg_process_pending_beacon_hints(void)
{
- struct cfg80211_registered_device *drv;
+ struct cfg80211_registered_device *rdev;
struct reg_beacon *pending_beacon, *tmp;
+ /*
+ * No need to hold the reg_mutex here as we just touch wiphys
+ * and do not read or access regulatory variables.
+ */
mutex_lock(&cfg80211_mutex);
/* This goes through the _pending_ beacon list */
@@ -1634,8 +1643,8 @@
list_del_init(&pending_beacon->list);
/* Applies the beacon hint to current wiphys */
- list_for_each_entry(drv, &cfg80211_drv_list, list)
- wiphy_update_new_beacon(&drv->wiphy, pending_beacon);
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list)
+ wiphy_update_new_beacon(&rdev->wiphy, pending_beacon);
/* Remembers the beacon hint for new wiphys or reg changes */
list_add_tail(&pending_beacon->list, ®_beacon_list);
@@ -1739,12 +1748,13 @@
}
EXPORT_SYMBOL(regulatory_hint);
+/* Caller must hold reg_mutex */
static bool reg_same_country_ie_hint(struct wiphy *wiphy,
u32 country_ie_checksum)
{
struct wiphy *request_wiphy;
- assert_cfg80211_lock();
+ assert_reg_lock();
if (unlikely(last_request->initiator !=
NL80211_REGDOM_SET_BY_COUNTRY_IE))
@@ -1767,6 +1777,10 @@
return false;
}
+/*
+ * We hold wdev_lock() here so we cannot hold cfg80211_mutex() and
+ * therefore cannot iterate over the rdev list here.
+ */
void regulatory_hint_11d(struct wiphy *wiphy,
u8 *country_ie,
u8 country_ie_len)
@@ -1777,12 +1791,10 @@
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request;
- mutex_lock(&cfg80211_mutex);
+ mutex_lock(®_mutex);
- if (unlikely(!last_request)) {
- mutex_unlock(&cfg80211_mutex);
- return;
- }
+ if (unlikely(!last_request))
+ goto out;
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
@@ -1808,54 +1820,14 @@
env = ENVIRON_OUTDOOR;
/*
- * We will run this for *every* beacon processed for the BSSID, so
- * we optimize an early check to exit out early if we don't have to
- * do anything
+ * We will run this only upon a successful connection on cfg80211.
+ * We leave conflict resolution to the workqueue, where can hold
+ * cfg80211_mutex.
*/
if (likely(last_request->initiator ==
NL80211_REGDOM_SET_BY_COUNTRY_IE &&
- wiphy_idx_valid(last_request->wiphy_idx))) {
- struct cfg80211_registered_device *drv_last_ie;
-
- drv_last_ie =
- cfg80211_drv_by_wiphy_idx(last_request->wiphy_idx);
-
- /*
- * Lets keep this simple -- we trust the first AP
- * after we intersect with CRDA
- */
- if (likely(&drv_last_ie->wiphy == wiphy)) {
- /*
- * Ignore IEs coming in on this wiphy with
- * the same alpha2 and environment cap
- */
- if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2,
- alpha2) &&
- env == drv_last_ie->env)) {
- goto out;
- }
- /*
- * the wiphy moved on to another BSSID or the AP
- * was reconfigured. XXX: We need to deal with the
- * case where the user suspends and goes to goes
- * to another country, and then gets IEs from an
- * AP with different settings
- */
- goto out;
- } else {
- /*
- * Ignore IEs coming in on two separate wiphys with
- * the same alpha2 and environment cap
- */
- if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2,
- alpha2) &&
- env == drv_last_ie->env)) {
- goto out;
- }
- /* We could potentially intersect though */
- goto out;
- }
- }
+ wiphy_idx_valid(last_request->wiphy_idx)))
+ goto out;
rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
if (!rd)
@@ -1890,7 +1862,7 @@
request->country_ie_checksum = checksum;
request->country_ie_env = env;
- mutex_unlock(&cfg80211_mutex);
+ mutex_unlock(®_mutex);
queue_regulatory_request(request);
@@ -1899,9 +1871,8 @@
free_rd_out:
kfree(rd);
out:
- mutex_unlock(&cfg80211_mutex);
+ mutex_unlock(®_mutex);
}
-EXPORT_SYMBOL(regulatory_hint_11d);
static bool freq_is_chan_12_13_14(u16 freq)
{
@@ -1996,14 +1967,14 @@
if (last_request->initiator ==
NL80211_REGDOM_SET_BY_COUNTRY_IE) {
- struct cfg80211_registered_device *drv;
- drv = cfg80211_drv_by_wiphy_idx(
+ struct cfg80211_registered_device *rdev;
+ rdev = cfg80211_rdev_by_wiphy_idx(
last_request->wiphy_idx);
- if (drv) {
+ if (rdev) {
printk(KERN_INFO "cfg80211: Current regulatory "
"domain updated by AP to: %c%c\n",
- drv->country_ie_alpha2[0],
- drv->country_ie_alpha2[1]);
+ rdev->country_ie_alpha2[0],
+ rdev->country_ie_alpha2[1]);
} else
printk(KERN_INFO "cfg80211: Current regulatory "
"domain intersected: \n");
@@ -2064,7 +2035,7 @@
static int __set_regdom(const struct ieee80211_regdomain *rd)
{
const struct ieee80211_regdomain *intersected_rd = NULL;
- struct cfg80211_registered_device *drv = NULL;
+ struct cfg80211_registered_device *rdev = NULL;
struct wiphy *request_wiphy;
/* Some basic sanity checks first */
@@ -2203,11 +2174,11 @@
if (!intersected_rd)
return -EINVAL;
- drv = wiphy_to_dev(request_wiphy);
+ rdev = wiphy_to_dev(request_wiphy);
- drv->country_ie_alpha2[0] = rd->alpha2[0];
- drv->country_ie_alpha2[1] = rd->alpha2[1];
- drv->env = last_request->country_ie_env;
+ rdev->country_ie_alpha2[0] = rd->alpha2[0];
+ rdev->country_ie_alpha2[1] = rd->alpha2[1];
+ rdev->env = last_request->country_ie_env;
BUG_ON(intersected_rd == rd);
@@ -2232,10 +2203,13 @@
assert_cfg80211_lock();
+ mutex_lock(®_mutex);
+
/* Note that this doesn't update the wiphys, this is done below */
r = __set_regdom(rd);
if (r) {
kfree(rd);
+ mutex_unlock(®_mutex);
return r;
}
@@ -2250,6 +2224,8 @@
nl80211_send_reg_change_event(last_request);
+ mutex_unlock(®_mutex);
+
return r;
}
@@ -2260,16 +2236,20 @@
assert_cfg80211_lock();
+ mutex_lock(®_mutex);
+
kfree(wiphy->regd);
if (last_request)
request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
if (!request_wiphy || request_wiphy != wiphy)
- return;
+ goto out;
last_request->wiphy_idx = WIPHY_IDX_STALE;
last_request->country_ie_env = ENVIRON_ANY;
+out:
+ mutex_unlock(®_mutex);
}
int regulatory_init(void)
@@ -2288,22 +2268,12 @@
printk(KERN_INFO "cfg80211: Using static regulatory domain info\n");
print_regdomain_info(cfg80211_regdomain);
- /*
- * The old code still requests for a new regdomain and if
- * you have CRDA you get it updated, otherwise you get
- * stuck with the static values. Since "EU" is not a valid
- * ISO / IEC 3166 alpha2 code we can't expect userpace to
- * give us a regulatory domain for it. We need last_request
- * iniitalized though so lets just send a request which we
- * know will be ignored... this crap will be removed once
- * OLD_REG dies.
- */
- err = regulatory_hint_core(ieee80211_regdom);
#else
cfg80211_regdomain = cfg80211_world_regdom;
- err = regulatory_hint_core(ieee80211_regdom);
#endif
+ /* We always try to get an update for the static regdomain */
+ err = regulatory_hint_core(cfg80211_regdomain->alpha2);
if (err) {
if (err == -ENOMEM)
return err;
@@ -2322,6 +2292,13 @@
#endif
}
+ /*
+ * Finally, if the user set the module parameter treat it
+ * as a user hint.
+ */
+ if (!is_world_regdom(ieee80211_regdom))
+ regulatory_hint_user(ieee80211_regdom);
+
return 0;
}
@@ -2333,6 +2310,7 @@
cancel_work_sync(®_work);
mutex_lock(&cfg80211_mutex);
+ mutex_lock(®_mutex);
reset_regdomains();
@@ -2371,5 +2349,6 @@
}
spin_unlock(®_requests_lock);
+ mutex_unlock(®_mutex);
mutex_unlock(&cfg80211_mutex);
}
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 4e167a8..3362c7c 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -37,4 +37,19 @@
struct ieee80211_channel *beacon_chan,
gfp_t gfp);
+/**
+ * regulatory_hint_11d - hints a country IE as a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ * conflicts)
+ * @country_ie: pointer to the country IE
+ * @country_ie_len: length of the country IE
+ *
+ * We will intersect the rd with the what CRDA tells us should apply
+ * for the alpha2 this country IE belongs to, this prevents APs from
+ * sending us incorrect or outdated information against a country.
+ */
+void regulatory_hint_11d(struct wiphy *wiphy,
+ u8 *country_ie,
+ u8 country_ie_len);
+
#endif /* __NET_WIRELESS_REG_H */
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 7e595ce..4c210c2 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -14,29 +14,41 @@
#include <net/iw_handler.h>
#include "core.h"
#include "nl80211.h"
+#include "wext-compat.h"
-#define IEEE80211_SCAN_RESULT_EXPIRE (10 * HZ)
+#define IEEE80211_SCAN_RESULT_EXPIRE (15 * HZ)
-void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool leak)
{
+ struct cfg80211_scan_request *request;
struct net_device *dev;
#ifdef CONFIG_WIRELESS_EXT
union iwreq_data wrqu;
#endif
- dev = dev_get_by_index(&init_net, request->ifidx);
- if (!dev)
- goto out;
+ ASSERT_RDEV_LOCK(rdev);
- WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
+ request = rdev->scan_req;
- if (aborted)
- nl80211_send_scan_aborted(wiphy_to_dev(request->wiphy), dev);
+ if (!request)
+ return;
+
+ dev = request->dev;
+
+ /*
+ * This must be before sending the other events!
+ * Otherwise, wpa_supplicant gets completely confused with
+ * wext events.
+ */
+ cfg80211_sme_scan_done(dev);
+
+ if (request->aborted)
+ nl80211_send_scan_aborted(rdev, dev);
else
- nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
+ nl80211_send_scan_done(rdev, dev);
#ifdef CONFIG_WIRELESS_EXT
- if (!aborted) {
+ if (!request->aborted) {
memset(&wrqu, 0, sizeof(wrqu));
wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
@@ -45,9 +57,38 @@
dev_put(dev);
- out:
- wiphy_to_dev(request->wiphy)->scan_req = NULL;
- kfree(request);
+ rdev->scan_req = NULL;
+
+ /*
+ * OK. If this is invoked with "leak" then we can't
+ * free this ... but we've cleaned it up anyway. The
+ * driver failed to call the scan_done callback, so
+ * all bets are off, it might still be trying to use
+ * the scan request or not ... if it accesses the dev
+ * in there (it shouldn't anyway) then it may crash.
+ */
+ if (!leak)
+ kfree(request);
+}
+
+void __cfg80211_scan_done(struct work_struct *wk)
+{
+ struct cfg80211_registered_device *rdev;
+
+ rdev = container_of(wk, struct cfg80211_registered_device,
+ scan_done_wk);
+
+ cfg80211_lock_rdev(rdev);
+ ___cfg80211_scan_done(rdev, false);
+ cfg80211_unlock_rdev(rdev);
+}
+
+void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
+{
+ WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
+
+ request->aborted = aborted;
+ schedule_work(&wiphy_to_dev(request->wiphy)->scan_done_wk);
}
EXPORT_SYMBOL(cfg80211_scan_done);
@@ -62,6 +103,8 @@
if (bss->ies_allocated)
kfree(bss->pub.information_elements);
+ BUG_ON(atomic_read(&bss->hold));
+
kfree(bss);
}
@@ -84,8 +127,9 @@
bool expired = false;
list_for_each_entry_safe(bss, tmp, &dev->bss_list, list) {
- if (bss->hold ||
- !time_after(jiffies, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE))
+ if (atomic_read(&bss->hold))
+ continue;
+ if (!time_after(jiffies, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE))
continue;
list_del(&bss->list);
rb_erase(&bss->rbn, &dev->bss_tree);
@@ -97,7 +141,7 @@
dev->bss_generation++;
}
-static u8 *find_ie(u8 num, u8 *ies, size_t len)
+static u8 *find_ie(u8 num, u8 *ies, int len)
{
while (len > 2 && ies[0] != num) {
len -= ies[1] + 2;
@@ -539,6 +583,7 @@
spin_lock_bh(&dev->bss_lock);
list_del(&bss->list);
+ dev->bss_generation++;
rb_erase(&bss->rbn, &dev->bss_tree);
spin_unlock_bh(&dev->bss_lock);
@@ -547,30 +592,6 @@
}
EXPORT_SYMBOL(cfg80211_unlink_bss);
-void cfg80211_hold_bss(struct cfg80211_bss *pub)
-{
- struct cfg80211_internal_bss *bss;
-
- if (!pub)
- return;
-
- bss = container_of(pub, struct cfg80211_internal_bss, pub);
- bss->hold = true;
-}
-EXPORT_SYMBOL(cfg80211_hold_bss);
-
-void cfg80211_unhold_bss(struct cfg80211_bss *pub)
-{
- struct cfg80211_internal_bss *bss;
-
- if (!pub)
- return;
-
- bss = container_of(pub, struct cfg80211_internal_bss, pub);
- bss->hold = false;
-}
-EXPORT_SYMBOL(cfg80211_unhold_bss);
-
#ifdef CONFIG_WIRELESS_EXT
int cfg80211_wext_siwscan(struct net_device *dev,
struct iw_request_info *info,
@@ -586,7 +607,10 @@
if (!netif_running(dev))
return -ENETDOWN;
- rdev = cfg80211_get_dev_from_ifindex(dev->ifindex);
+ if (wrqu->data.length == sizeof(struct iw_scan_req))
+ wreq = (struct iw_scan_req *)extra;
+
+ rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
@@ -598,9 +622,14 @@
wiphy = &rdev->wiphy;
- for (band = 0; band < IEEE80211_NUM_BANDS; band++)
- if (wiphy->bands[band])
- n_channels += wiphy->bands[band]->n_channels;
+ /* Determine number of channels, needed to allocate creq */
+ if (wreq && wreq->num_channels)
+ n_channels = wreq->num_channels;
+ else {
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+ if (wiphy->bands[band])
+ n_channels += wiphy->bands[band]->n_channels;
+ }
creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
n_channels * sizeof(void *),
@@ -611,28 +640,47 @@
}
creq->wiphy = wiphy;
- creq->ifidx = dev->ifindex;
- creq->ssids = (void *)(creq + 1);
- creq->channels = (void *)(creq->ssids + 1);
+ creq->dev = dev;
+ /* SSIDs come after channels */
+ creq->ssids = (void *)&creq->channels[n_channels];
creq->n_channels = n_channels;
creq->n_ssids = 1;
- /* all channels */
+ /* translate "Scan on frequencies" request */
i = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
int j;
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+
+ /* If we have a wireless request structure and the
+ * wireless request specifies frequencies, then search
+ * for the matching hardware channel.
+ */
+ if (wreq && wreq->num_channels) {
+ int k;
+ int wiphy_freq = wiphy->bands[band]->channels[j].center_freq;
+ for (k = 0; k < wreq->num_channels; k++) {
+ int wext_freq = wreq->channel_list[k].m / 100000;
+ if (wext_freq == wiphy_freq)
+ goto wext_freq_found;
+ }
+ goto wext_freq_not_found;
+ }
+
+ wext_freq_found:
creq->channels[i] = &wiphy->bands[band]->channels[j];
i++;
+ wext_freq_not_found: ;
}
}
- /* translate scan request */
- if (wrqu->data.length == sizeof(struct iw_scan_req)) {
- wreq = (struct iw_scan_req *)extra;
+ /* Set real number of channels specified in creq->channels[] */
+ creq->n_channels = i;
+ /* translate "Scan for SSID" request */
+ if (wreq) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
if (wreq->essid_len > IEEE80211_MAX_SSID_LEN)
return -EINVAL;
@@ -648,9 +696,12 @@
if (err) {
rdev->scan_req = NULL;
kfree(creq);
+ } else {
+ nl80211_send_scan_start(rdev, dev);
+ dev_hold(dev);
}
out:
- cfg80211_put_dev(rdev);
+ cfg80211_unlock_rdev(rdev);
return err;
}
EXPORT_SYMBOL_GPL(cfg80211_wext_siwscan);
@@ -941,7 +992,7 @@
if (!netif_running(dev))
return -ENETDOWN;
- rdev = cfg80211_get_dev_from_ifindex(dev->ifindex);
+ rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
@@ -959,7 +1010,7 @@
}
out:
- cfg80211_put_dev(rdev);
+ cfg80211_unlock_rdev(rdev);
return res;
}
EXPORT_SYMBOL_GPL(cfg80211_wext_giwscan);
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
new file mode 100644
index 0000000..6830788
--- /dev/null
+++ b/net/wireless/sme.c
@@ -0,0 +1,933 @@
+/*
+ * SME code for cfg80211's connect emulation.
+ *
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <linux/workqueue.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <net/cfg80211.h>
+#include <net/rtnetlink.h>
+#include "nl80211.h"
+#include "reg.h"
+
+struct cfg80211_conn {
+ struct cfg80211_connect_params params;
+ /* these are sub-states of the _CONNECTING sme_state */
+ enum {
+ CFG80211_CONN_IDLE,
+ CFG80211_CONN_SCANNING,
+ CFG80211_CONN_SCAN_AGAIN,
+ CFG80211_CONN_AUTHENTICATE_NEXT,
+ CFG80211_CONN_AUTHENTICATING,
+ CFG80211_CONN_ASSOCIATE_NEXT,
+ CFG80211_CONN_ASSOCIATING,
+ } state;
+ u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
+ u8 *ie;
+ size_t ie_len;
+ bool auto_auth, prev_bssid_valid;
+};
+
+
+static int cfg80211_conn_scan(struct wireless_dev *wdev)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_scan_request *request;
+ int n_channels, err;
+
+ ASSERT_RTNL();
+ ASSERT_RDEV_LOCK(rdev);
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (rdev->scan_req)
+ return -EBUSY;
+
+ if (wdev->conn->params.channel) {
+ n_channels = 1;
+ } else {
+ enum ieee80211_band band;
+ n_channels = 0;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!wdev->wiphy->bands[band])
+ continue;
+ n_channels += wdev->wiphy->bands[band]->n_channels;
+ }
+ }
+ request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) +
+ sizeof(request->channels[0]) * n_channels,
+ GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+
+ if (wdev->conn->params.channel)
+ request->channels[0] = wdev->conn->params.channel;
+ else {
+ int i = 0, j;
+ enum ieee80211_band band;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!wdev->wiphy->bands[band])
+ continue;
+ for (j = 0; j < wdev->wiphy->bands[band]->n_channels;
+ i++, j++)
+ request->channels[i] =
+ &wdev->wiphy->bands[band]->channels[j];
+ }
+ }
+ request->n_channels = n_channels;
+ request->ssids = (void *)&request->channels[n_channels];
+ request->n_ssids = 1;
+
+ memcpy(request->ssids[0].ssid, wdev->conn->params.ssid,
+ wdev->conn->params.ssid_len);
+ request->ssids[0].ssid_len = wdev->conn->params.ssid_len;
+
+ request->dev = wdev->netdev;
+ request->wiphy = &rdev->wiphy;
+
+ rdev->scan_req = request;
+
+ err = rdev->ops->scan(wdev->wiphy, wdev->netdev, request);
+ if (!err) {
+ wdev->conn->state = CFG80211_CONN_SCANNING;
+ nl80211_send_scan_start(rdev, wdev->netdev);
+ dev_hold(wdev->netdev);
+ } else {
+ rdev->scan_req = NULL;
+ kfree(request);
+ }
+ return err;
+}
+
+static int cfg80211_conn_do_work(struct wireless_dev *wdev)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_connect_params *params;
+ const u8 *prev_bssid = NULL;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (!wdev->conn)
+ return 0;
+
+ params = &wdev->conn->params;
+
+ switch (wdev->conn->state) {
+ case CFG80211_CONN_SCAN_AGAIN:
+ return cfg80211_conn_scan(wdev);
+ case CFG80211_CONN_AUTHENTICATE_NEXT:
+ BUG_ON(!rdev->ops->auth);
+ wdev->conn->state = CFG80211_CONN_AUTHENTICATING;
+ return __cfg80211_mlme_auth(rdev, wdev->netdev,
+ params->channel, params->auth_type,
+ params->bssid,
+ params->ssid, params->ssid_len,
+ NULL, 0,
+ params->key, params->key_len,
+ params->key_idx);
+ case CFG80211_CONN_ASSOCIATE_NEXT:
+ BUG_ON(!rdev->ops->assoc);
+ wdev->conn->state = CFG80211_CONN_ASSOCIATING;
+ if (wdev->conn->prev_bssid_valid)
+ prev_bssid = wdev->conn->prev_bssid;
+ err = __cfg80211_mlme_assoc(rdev, wdev->netdev,
+ params->channel, params->bssid,
+ prev_bssid,
+ params->ssid, params->ssid_len,
+ params->ie, params->ie_len,
+ false, ¶ms->crypto);
+ if (err)
+ __cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
+ NULL, 0,
+ WLAN_REASON_DEAUTH_LEAVING);
+ return err;
+ default:
+ return 0;
+ }
+}
+
+void cfg80211_conn_work(struct work_struct *work)
+{
+ struct cfg80211_registered_device *rdev =
+ container_of(work, struct cfg80211_registered_device, conn_work);
+ struct wireless_dev *wdev;
+
+ rtnl_lock();
+ cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->devlist_mtx);
+
+ list_for_each_entry(wdev, &rdev->netdev_list, list) {
+ wdev_lock(wdev);
+ if (!netif_running(wdev->netdev)) {
+ wdev_unlock(wdev);
+ continue;
+ }
+ if (wdev->sme_state != CFG80211_SME_CONNECTING) {
+ wdev_unlock(wdev);
+ continue;
+ }
+ if (cfg80211_conn_do_work(wdev))
+ __cfg80211_connect_result(
+ wdev->netdev,
+ wdev->conn->params.bssid,
+ NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ false, NULL);
+ wdev_unlock(wdev);
+ }
+
+ mutex_unlock(&rdev->devlist_mtx);
+ cfg80211_unlock_rdev(rdev);
+ rtnl_unlock();
+}
+
+static bool cfg80211_get_conn_bss(struct wireless_dev *wdev)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_bss *bss;
+ u16 capa = WLAN_CAPABILITY_ESS;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (wdev->conn->params.privacy)
+ capa |= WLAN_CAPABILITY_PRIVACY;
+
+ bss = cfg80211_get_bss(wdev->wiphy, NULL, wdev->conn->params.bssid,
+ wdev->conn->params.ssid,
+ wdev->conn->params.ssid_len,
+ WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY,
+ capa);
+ if (!bss)
+ return false;
+
+ memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN);
+ wdev->conn->params.bssid = wdev->conn->bssid;
+ wdev->conn->params.channel = bss->channel;
+ wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
+ schedule_work(&rdev->conn_work);
+
+ cfg80211_put_bss(bss);
+ return true;
+}
+
+static void __cfg80211_sme_scan_done(struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (wdev->sme_state != CFG80211_SME_CONNECTING)
+ return;
+
+ if (!wdev->conn)
+ return;
+
+ if (wdev->conn->state != CFG80211_CONN_SCANNING &&
+ wdev->conn->state != CFG80211_CONN_SCAN_AGAIN)
+ return;
+
+ if (!cfg80211_get_conn_bss(wdev)) {
+ /* not found */
+ if (wdev->conn->state == CFG80211_CONN_SCAN_AGAIN)
+ schedule_work(&rdev->conn_work);
+ else
+ __cfg80211_connect_result(
+ wdev->netdev,
+ wdev->conn->params.bssid,
+ NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ false, NULL);
+ }
+}
+
+void cfg80211_sme_scan_done(struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
+ wdev_lock(wdev);
+ __cfg80211_sme_scan_done(dev);
+ wdev_unlock(wdev);
+ mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
+}
+
+void cfg80211_sme_rx_auth(struct net_device *dev,
+ const u8 *buf, size_t len)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct wiphy *wiphy = wdev->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
+ u16 status_code = le16_to_cpu(mgmt->u.auth.status_code);
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ /* should only RX auth frames when connecting */
+ if (wdev->sme_state != CFG80211_SME_CONNECTING)
+ return;
+
+ if (WARN_ON(!wdev->conn))
+ return;
+
+ if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
+ wdev->conn->auto_auth &&
+ wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) {
+ /* select automatically between only open, shared, leap */
+ switch (wdev->conn->params.auth_type) {
+ case NL80211_AUTHTYPE_OPEN_SYSTEM:
+ if (wdev->connect_keys)
+ wdev->conn->params.auth_type =
+ NL80211_AUTHTYPE_SHARED_KEY;
+ else
+ wdev->conn->params.auth_type =
+ NL80211_AUTHTYPE_NETWORK_EAP;
+ break;
+ case NL80211_AUTHTYPE_SHARED_KEY:
+ wdev->conn->params.auth_type =
+ NL80211_AUTHTYPE_NETWORK_EAP;
+ break;
+ default:
+ /* huh? */
+ wdev->conn->params.auth_type =
+ NL80211_AUTHTYPE_OPEN_SYSTEM;
+ break;
+ }
+ wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
+ schedule_work(&rdev->conn_work);
+ } else if (status_code != WLAN_STATUS_SUCCESS) {
+ __cfg80211_connect_result(dev, mgmt->bssid, NULL, 0, NULL, 0,
+ status_code, false, NULL);
+ } else if (wdev->sme_state == CFG80211_SME_CONNECTING &&
+ wdev->conn->state == CFG80211_CONN_AUTHENTICATING) {
+ wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
+ schedule_work(&rdev->conn_work);
+ }
+}
+
+bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev)
+{
+ struct wiphy *wiphy = wdev->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ if (WARN_ON(!wdev->conn))
+ return false;
+
+ if (!wdev->conn->prev_bssid_valid)
+ return false;
+
+ /*
+ * Some stupid APs don't accept reassoc, so we
+ * need to fall back to trying regular assoc.
+ */
+ wdev->conn->prev_bssid_valid = false;
+ wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
+ schedule_work(&rdev->conn_work);
+
+ return true;
+}
+
+void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len,
+ u16 status, bool wextev,
+ struct cfg80211_bss *bss)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ u8 *country_ie;
+#ifdef CONFIG_WIRELESS_EXT
+ union iwreq_data wrqu;
+#endif
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return;
+
+ if (wdev->sme_state != CFG80211_SME_CONNECTING)
+ return;
+
+ nl80211_send_connect_result(wiphy_to_dev(wdev->wiphy), dev,
+ bssid, req_ie, req_ie_len,
+ resp_ie, resp_ie_len,
+ status, GFP_KERNEL);
+
+#ifdef CONFIG_WIRELESS_EXT
+ if (wextev) {
+ if (req_ie && status == WLAN_STATUS_SUCCESS) {
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = req_ie_len;
+ wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, req_ie);
+ }
+
+ if (resp_ie && status == WLAN_STATUS_SUCCESS) {
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = resp_ie_len;
+ wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, resp_ie);
+ }
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ if (bssid && status == WLAN_STATUS_SUCCESS) {
+ memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
+ memcpy(wdev->wext.prev_bssid, bssid, ETH_ALEN);
+ wdev->wext.prev_bssid_valid = true;
+ }
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ }
+#endif
+
+ if (wdev->current_bss) {
+ cfg80211_unhold_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
+ wdev->current_bss = NULL;
+ }
+
+ if (wdev->conn)
+ wdev->conn->state = CFG80211_CONN_IDLE;
+
+ if (status != WLAN_STATUS_SUCCESS) {
+ wdev->sme_state = CFG80211_SME_IDLE;
+ if (wdev->conn)
+ kfree(wdev->conn->ie);
+ kfree(wdev->conn);
+ wdev->conn = NULL;
+ kfree(wdev->connect_keys);
+ wdev->connect_keys = NULL;
+ wdev->ssid_len = 0;
+ return;
+ }
+
+ if (!bss)
+ bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
+ wdev->ssid, wdev->ssid_len,
+ WLAN_CAPABILITY_ESS,
+ WLAN_CAPABILITY_ESS);
+
+ if (WARN_ON(!bss))
+ return;
+
+ cfg80211_hold_bss(bss_from_pub(bss));
+ wdev->current_bss = bss_from_pub(bss);
+
+ wdev->sme_state = CFG80211_SME_CONNECTED;
+ cfg80211_upload_connect_keys(wdev);
+
+ country_ie = (u8 *) ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY);
+
+ if (!country_ie)
+ return;
+
+ /*
+ * ieee80211_bss_get_ie() ensures we can access:
+ * - country_ie + 2, the start of the country ie data, and
+ * - and country_ie[1] which is the IE length
+ */
+ regulatory_hint_11d(wdev->wiphy,
+ country_ie + 2,
+ country_ie[1]);
+}
+
+void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len,
+ u16 status, gfp_t gfp)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_event *ev;
+ unsigned long flags;
+
+ CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTING);
+
+ ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp);
+ if (!ev)
+ return;
+
+ ev->type = EVENT_CONNECT_RESULT;
+ if (bssid)
+ memcpy(ev->cr.bssid, bssid, ETH_ALEN);
+ ev->cr.req_ie = ((u8 *)ev) + sizeof(*ev);
+ ev->cr.req_ie_len = req_ie_len;
+ memcpy((void *)ev->cr.req_ie, req_ie, req_ie_len);
+ ev->cr.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len;
+ ev->cr.resp_ie_len = resp_ie_len;
+ memcpy((void *)ev->cr.resp_ie, resp_ie, resp_ie_len);
+ ev->cr.status = status;
+
+ spin_lock_irqsave(&wdev->event_lock, flags);
+ list_add_tail(&ev->list, &wdev->event_list);
+ spin_unlock_irqrestore(&wdev->event_lock, flags);
+ schedule_work(&rdev->event_work);
+}
+EXPORT_SYMBOL(cfg80211_connect_result);
+
+void __cfg80211_roamed(struct wireless_dev *wdev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len)
+{
+ struct cfg80211_bss *bss;
+#ifdef CONFIG_WIRELESS_EXT
+ union iwreq_data wrqu;
+#endif
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return;
+
+ if (wdev->sme_state != CFG80211_SME_CONNECTED)
+ return;
+
+ /* internal error -- how did we get to CONNECTED w/o BSS? */
+ if (WARN_ON(!wdev->current_bss)) {
+ return;
+ }
+
+ cfg80211_unhold_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
+ wdev->current_bss = NULL;
+
+ bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
+ wdev->ssid, wdev->ssid_len,
+ WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
+
+ if (WARN_ON(!bss))
+ return;
+
+ cfg80211_hold_bss(bss_from_pub(bss));
+ wdev->current_bss = bss_from_pub(bss);
+
+ nl80211_send_roamed(wiphy_to_dev(wdev->wiphy), wdev->netdev, bssid,
+ req_ie, req_ie_len, resp_ie, resp_ie_len,
+ GFP_KERNEL);
+
+#ifdef CONFIG_WIRELESS_EXT
+ if (req_ie) {
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = req_ie_len;
+ wireless_send_event(wdev->netdev, IWEVASSOCREQIE,
+ &wrqu, req_ie);
+ }
+
+ if (resp_ie) {
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = resp_ie_len;
+ wireless_send_event(wdev->netdev, IWEVASSOCRESPIE,
+ &wrqu, resp_ie);
+ }
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
+ memcpy(wdev->wext.prev_bssid, bssid, ETH_ALEN);
+ wdev->wext.prev_bssid_valid = true;
+ wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL);
+#endif
+}
+
+void cfg80211_roamed(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len,
+ const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_event *ev;
+ unsigned long flags;
+
+ CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTED);
+
+ ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp);
+ if (!ev)
+ return;
+
+ ev->type = EVENT_ROAMED;
+ memcpy(ev->rm.bssid, bssid, ETH_ALEN);
+ ev->rm.req_ie = ((u8 *)ev) + sizeof(*ev);
+ ev->rm.req_ie_len = req_ie_len;
+ memcpy((void *)ev->rm.req_ie, req_ie, req_ie_len);
+ ev->rm.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len;
+ ev->rm.resp_ie_len = resp_ie_len;
+ memcpy((void *)ev->rm.resp_ie, resp_ie, resp_ie_len);
+
+ spin_lock_irqsave(&wdev->event_lock, flags);
+ list_add_tail(&ev->list, &wdev->event_list);
+ spin_unlock_irqrestore(&wdev->event_lock, flags);
+ schedule_work(&rdev->event_work);
+}
+EXPORT_SYMBOL(cfg80211_roamed);
+
+void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
+ size_t ie_len, u16 reason, bool from_ap)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ int i;
+#ifdef CONFIG_WIRELESS_EXT
+ union iwreq_data wrqu;
+#endif
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return;
+
+ if (wdev->sme_state != CFG80211_SME_CONNECTED)
+ return;
+
+ if (wdev->current_bss) {
+ cfg80211_unhold_bss(wdev->current_bss);
+ cfg80211_put_bss(&wdev->current_bss->pub);
+ }
+
+ wdev->current_bss = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
+ wdev->ssid_len = 0;
+
+ if (wdev->conn) {
+ const u8 *bssid;
+ int ret;
+
+ kfree(wdev->conn->ie);
+ wdev->conn->ie = NULL;
+ kfree(wdev->conn);
+ wdev->conn = NULL;
+
+ /*
+ * If this disconnect was due to a disassoc, we
+ * we might still have an auth BSS around. For
+ * the userspace SME that's currently expected,
+ * but for the kernel SME (nl80211 CONNECT or
+ * wireless extensions) we want to clear up all
+ * state.
+ */
+ for (i = 0; i < MAX_AUTH_BSSES; i++) {
+ if (!wdev->auth_bsses[i])
+ continue;
+ bssid = wdev->auth_bsses[i]->pub.bssid;
+ ret = __cfg80211_mlme_deauth(rdev, dev, bssid, NULL, 0,
+ WLAN_REASON_DEAUTH_LEAVING);
+ WARN(ret, "deauth failed: %d\n", ret);
+ }
+ }
+
+ nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap);
+
+ /*
+ * Delete all the keys ... pairwise keys can't really
+ * exist any more anyway, but default keys might.
+ */
+ if (rdev->ops->del_key)
+ for (i = 0; i < 6; i++)
+ rdev->ops->del_key(wdev->wiphy, dev, i, NULL);
+
+#ifdef CONFIG_WIRELESS_EXT
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+#endif
+}
+
+void cfg80211_disconnected(struct net_device *dev, u16 reason,
+ u8 *ie, size_t ie_len, gfp_t gfp)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_event *ev;
+ unsigned long flags;
+
+ CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTED);
+
+ ev = kzalloc(sizeof(*ev) + ie_len, gfp);
+ if (!ev)
+ return;
+
+ ev->type = EVENT_DISCONNECTED;
+ ev->dc.ie = ((u8 *)ev) + sizeof(*ev);
+ ev->dc.ie_len = ie_len;
+ memcpy((void *)ev->dc.ie, ie, ie_len);
+ ev->dc.reason = reason;
+
+ spin_lock_irqsave(&wdev->event_lock, flags);
+ list_add_tail(&ev->list, &wdev->event_list);
+ spin_unlock_irqrestore(&wdev->event_lock, flags);
+ schedule_work(&rdev->event_work);
+}
+EXPORT_SYMBOL(cfg80211_disconnected);
+
+int __cfg80211_connect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_connect_params *connect,
+ struct cfg80211_cached_keys *connkeys,
+ const u8 *prev_bssid)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct ieee80211_channel *chan;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (wdev->sme_state != CFG80211_SME_IDLE)
+ return -EALREADY;
+
+ chan = rdev_fixed_channel(rdev, wdev);
+ if (chan && chan != connect->channel)
+ return -EBUSY;
+
+ if (WARN_ON(wdev->connect_keys)) {
+ kfree(wdev->connect_keys);
+ wdev->connect_keys = NULL;
+ }
+
+ if (connkeys && connkeys->def >= 0) {
+ int idx;
+ u32 cipher;
+
+ idx = connkeys->def;
+ cipher = connkeys->params[idx].cipher;
+ /* If given a WEP key we may need it for shared key auth */
+ if (cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ cipher == WLAN_CIPHER_SUITE_WEP104) {
+ connect->key_idx = idx;
+ connect->key = connkeys->params[idx].key;
+ connect->key_len = connkeys->params[idx].key_len;
+
+ /*
+ * If ciphers are not set (e.g. when going through
+ * iwconfig), we have to set them appropriately here.
+ */
+ if (connect->crypto.cipher_group == 0)
+ connect->crypto.cipher_group = cipher;
+
+ if (connect->crypto.n_ciphers_pairwise == 0) {
+ connect->crypto.n_ciphers_pairwise = 1;
+ connect->crypto.ciphers_pairwise[0] = cipher;
+ }
+ }
+ }
+
+ if (!rdev->ops->connect) {
+ if (!rdev->ops->auth || !rdev->ops->assoc)
+ return -EOPNOTSUPP;
+
+ if (WARN_ON(wdev->conn))
+ return -EINPROGRESS;
+
+ wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL);
+ if (!wdev->conn)
+ return -ENOMEM;
+
+ /*
+ * Copy all parameters, and treat explicitly IEs, BSSID, SSID.
+ */
+ memcpy(&wdev->conn->params, connect, sizeof(*connect));
+ if (connect->bssid) {
+ wdev->conn->params.bssid = wdev->conn->bssid;
+ memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN);
+ }
+
+ if (connect->ie) {
+ wdev->conn->ie = kmemdup(connect->ie, connect->ie_len,
+ GFP_KERNEL);
+ wdev->conn->params.ie = wdev->conn->ie;
+ if (!wdev->conn->ie) {
+ kfree(wdev->conn);
+ wdev->conn = NULL;
+ return -ENOMEM;
+ }
+ }
+
+ if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) {
+ wdev->conn->auto_auth = true;
+ /* start with open system ... should mostly work */
+ wdev->conn->params.auth_type =
+ NL80211_AUTHTYPE_OPEN_SYSTEM;
+ } else {
+ wdev->conn->auto_auth = false;
+ }
+
+ memcpy(wdev->ssid, connect->ssid, connect->ssid_len);
+ wdev->ssid_len = connect->ssid_len;
+ wdev->conn->params.ssid = wdev->ssid;
+ wdev->conn->params.ssid_len = connect->ssid_len;
+
+ /* don't care about result -- but fill bssid & channel */
+ if (!wdev->conn->params.bssid || !wdev->conn->params.channel)
+ cfg80211_get_conn_bss(wdev);
+
+ wdev->sme_state = CFG80211_SME_CONNECTING;
+ wdev->connect_keys = connkeys;
+
+ if (prev_bssid) {
+ memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN);
+ wdev->conn->prev_bssid_valid = true;
+ }
+
+ /* we're good if we have both BSSID and channel */
+ if (wdev->conn->params.bssid && wdev->conn->params.channel) {
+ wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
+ err = cfg80211_conn_do_work(wdev);
+ } else {
+ /* otherwise we'll need to scan for the AP first */
+ err = cfg80211_conn_scan(wdev);
+ /*
+ * If we can't scan right now, then we need to scan again
+ * after the current scan finished, since the parameters
+ * changed (unless we find a good AP anyway).
+ */
+ if (err == -EBUSY) {
+ err = 0;
+ wdev->conn->state = CFG80211_CONN_SCAN_AGAIN;
+ }
+ }
+ if (err) {
+ kfree(wdev->conn->ie);
+ kfree(wdev->conn);
+ wdev->conn = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
+ wdev->connect_keys = NULL;
+ wdev->ssid_len = 0;
+ }
+
+ return err;
+ } else {
+ wdev->sme_state = CFG80211_SME_CONNECTING;
+ wdev->connect_keys = connkeys;
+ err = rdev->ops->connect(&rdev->wiphy, dev, connect);
+ if (err) {
+ wdev->connect_keys = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
+ return err;
+ }
+
+ memcpy(wdev->ssid, connect->ssid, connect->ssid_len);
+ wdev->ssid_len = connect->ssid_len;
+
+ return 0;
+ }
+}
+
+int cfg80211_connect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_connect_params *connect,
+ struct cfg80211_cached_keys *connkeys)
+{
+ int err;
+
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(dev->ieee80211_ptr);
+ err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL);
+ wdev_unlock(dev->ieee80211_ptr);
+ mutex_unlock(&rdev->devlist_mtx);
+
+ return err;
+}
+
+int __cfg80211_disconnect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, u16 reason, bool wextev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (wdev->sme_state == CFG80211_SME_IDLE)
+ return -EINVAL;
+
+ kfree(wdev->connect_keys);
+ wdev->connect_keys = NULL;
+
+ if (!rdev->ops->disconnect) {
+ if (!rdev->ops->deauth)
+ return -EOPNOTSUPP;
+
+ /* was it connected by userspace SME? */
+ if (!wdev->conn) {
+ cfg80211_mlme_down(rdev, dev);
+ return 0;
+ }
+
+ if (wdev->sme_state == CFG80211_SME_CONNECTING &&
+ (wdev->conn->state == CFG80211_CONN_SCANNING ||
+ wdev->conn->state == CFG80211_CONN_SCAN_AGAIN)) {
+ wdev->sme_state = CFG80211_SME_IDLE;
+ kfree(wdev->conn->ie);
+ kfree(wdev->conn);
+ wdev->conn = NULL;
+ wdev->ssid_len = 0;
+ return 0;
+ }
+
+ /* wdev->conn->params.bssid must be set if > SCANNING */
+ err = __cfg80211_mlme_deauth(rdev, dev,
+ wdev->conn->params.bssid,
+ NULL, 0, reason);
+ if (err)
+ return err;
+ } else {
+ err = rdev->ops->disconnect(&rdev->wiphy, dev, reason);
+ if (err)
+ return err;
+ }
+
+ if (wdev->sme_state == CFG80211_SME_CONNECTED)
+ __cfg80211_disconnected(dev, NULL, 0, 0, false);
+ else if (wdev->sme_state == CFG80211_SME_CONNECTING)
+ __cfg80211_connect_result(dev, NULL, NULL, 0, NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ wextev, NULL);
+
+ return 0;
+}
+
+int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ u16 reason, bool wextev)
+{
+ int err;
+
+ wdev_lock(dev->ieee80211_ptr);
+ err = __cfg80211_disconnect(rdev, dev, reason, wextev);
+ wdev_unlock(dev->ieee80211_ptr);
+
+ return err;
+}
+
+void cfg80211_sme_disassoc(struct net_device *dev, int idx)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ u8 bssid[ETH_ALEN];
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (!wdev->conn)
+ return;
+
+ if (wdev->conn->state == CFG80211_CONN_IDLE)
+ return;
+
+ /*
+ * Ok, so the association was made by this SME -- we don't
+ * want it any more so deauthenticate too.
+ */
+
+ if (!wdev->auth_bsses[idx])
+ return;
+
+ memcpy(bssid, wdev->auth_bsses[idx]->pub.bssid, ETH_ALEN);
+ if (__cfg80211_mlme_deauth(rdev, dev, bssid,
+ NULL, 0, WLAN_REASON_DEAUTH_LEAVING)) {
+ /* whatever -- assume gone anyway */
+ cfg80211_unhold_bss(wdev->auth_bsses[idx]);
+ cfg80211_put_bss(&wdev->auth_bsses[idx]->pub);
+ wdev->auth_bsses[idx] = NULL;
+ }
+}
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 2555069..3fc2df8 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -141,9 +141,12 @@
set_mandatory_flags_band(wiphy->bands[band], band);
}
-int cfg80211_validate_key_settings(struct key_params *params, int key_idx,
+int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
+ struct key_params *params, int key_idx,
const u8 *mac_addr)
{
+ int i;
+
if (key_idx > 5)
return -EINVAL;
@@ -197,6 +200,12 @@
}
}
+ for (i = 0; i < rdev->wiphy.n_cipher_suites; i++)
+ if (params->cipher == rdev->wiphy.cipher_suites[i])
+ break;
+ if (i == rdev->wiphy.n_cipher_suites)
+ return -EINVAL;
+
return 0;
}
@@ -265,11 +274,11 @@
switch (ae) {
case 0:
return 6;
- case 1:
+ case MESH_FLAGS_AE_A4:
return 12;
- case 2:
+ case MESH_FLAGS_AE_A5_A6:
return 18;
- case 3:
+ case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6):
return 24;
default:
return 6;
@@ -324,10 +333,18 @@
}
break;
case cpu_to_le16(IEEE80211_FCTL_FROMDS):
- if (iftype != NL80211_IFTYPE_STATION ||
+ if ((iftype != NL80211_IFTYPE_STATION &&
+ iftype != NL80211_IFTYPE_MESH_POINT) ||
(is_multicast_ether_addr(dst) &&
!compare_ether_addr(src, addr)))
return -1;
+ if (iftype == NL80211_IFTYPE_MESH_POINT) {
+ struct ieee80211s_hdr *meshdr =
+ (struct ieee80211s_hdr *) (skb->data + hdrlen);
+ hdrlen += ieee80211_get_mesh_hdrlen(meshdr);
+ if (meshdr->flags & MESH_FLAGS_AE_A4)
+ memcpy(src, meshdr->eaddr1, ETH_ALEN);
+ }
break;
case cpu_to_le16(0):
if (iftype != NL80211_IFTYPE_ADHOC)
@@ -502,3 +519,166 @@
return dscp >> 5;
}
EXPORT_SYMBOL(cfg80211_classify8021d);
+
+const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie)
+{
+ u8 *end, *pos;
+
+ pos = bss->information_elements;
+ if (pos == NULL)
+ return NULL;
+ end = pos + bss->len_information_elements;
+
+ while (pos + 1 < end) {
+ if (pos + 2 + pos[1] > end)
+ break;
+ if (pos[0] == ie)
+ return pos;
+ pos += 2 + pos[1];
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(ieee80211_bss_get_ie);
+
+void cfg80211_upload_connect_keys(struct wireless_dev *wdev)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct net_device *dev = wdev->netdev;
+ int i;
+
+ if (!wdev->connect_keys)
+ return;
+
+ for (i = 0; i < 6; i++) {
+ if (!wdev->connect_keys->params[i].cipher)
+ continue;
+ if (rdev->ops->add_key(wdev->wiphy, dev, i, NULL,
+ &wdev->connect_keys->params[i])) {
+ printk(KERN_ERR "%s: failed to set key %d\n",
+ dev->name, i);
+ continue;
+ }
+ if (wdev->connect_keys->def == i)
+ if (rdev->ops->set_default_key(wdev->wiphy, dev, i)) {
+ printk(KERN_ERR "%s: failed to set defkey %d\n",
+ dev->name, i);
+ continue;
+ }
+ if (wdev->connect_keys->defmgmt == i)
+ if (rdev->ops->set_default_mgmt_key(wdev->wiphy, dev, i))
+ printk(KERN_ERR "%s: failed to set mgtdef %d\n",
+ dev->name, i);
+ }
+
+ kfree(wdev->connect_keys);
+ wdev->connect_keys = NULL;
+}
+
+static void cfg80211_process_wdev_events(struct wireless_dev *wdev)
+{
+ struct cfg80211_event *ev;
+ unsigned long flags;
+ const u8 *bssid = NULL;
+
+ spin_lock_irqsave(&wdev->event_lock, flags);
+ while (!list_empty(&wdev->event_list)) {
+ ev = list_first_entry(&wdev->event_list,
+ struct cfg80211_event, list);
+ list_del(&ev->list);
+ spin_unlock_irqrestore(&wdev->event_lock, flags);
+
+ wdev_lock(wdev);
+ switch (ev->type) {
+ case EVENT_CONNECT_RESULT:
+ if (!is_zero_ether_addr(ev->cr.bssid))
+ bssid = ev->cr.bssid;
+ __cfg80211_connect_result(
+ wdev->netdev, bssid,
+ ev->cr.req_ie, ev->cr.req_ie_len,
+ ev->cr.resp_ie, ev->cr.resp_ie_len,
+ ev->cr.status,
+ ev->cr.status == WLAN_STATUS_SUCCESS,
+ NULL);
+ break;
+ case EVENT_ROAMED:
+ __cfg80211_roamed(wdev, ev->rm.bssid,
+ ev->rm.req_ie, ev->rm.req_ie_len,
+ ev->rm.resp_ie, ev->rm.resp_ie_len);
+ break;
+ case EVENT_DISCONNECTED:
+ __cfg80211_disconnected(wdev->netdev,
+ ev->dc.ie, ev->dc.ie_len,
+ ev->dc.reason, true);
+ break;
+ case EVENT_IBSS_JOINED:
+ __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid);
+ break;
+ }
+ wdev_unlock(wdev);
+
+ kfree(ev);
+
+ spin_lock_irqsave(&wdev->event_lock, flags);
+ }
+ spin_unlock_irqrestore(&wdev->event_lock, flags);
+}
+
+void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev)
+{
+ struct wireless_dev *wdev;
+
+ ASSERT_RTNL();
+ ASSERT_RDEV_LOCK(rdev);
+
+ mutex_lock(&rdev->devlist_mtx);
+
+ list_for_each_entry(wdev, &rdev->netdev_list, list)
+ cfg80211_process_wdev_events(wdev);
+
+ mutex_unlock(&rdev->devlist_mtx);
+}
+
+int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, enum nl80211_iftype ntype,
+ u32 *flags, struct vif_params *params)
+{
+ int err;
+ enum nl80211_iftype otype = dev->ieee80211_ptr->iftype;
+
+ ASSERT_RDEV_LOCK(rdev);
+
+ /* don't support changing VLANs, you just re-create them */
+ if (otype == NL80211_IFTYPE_AP_VLAN)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->change_virtual_intf ||
+ !(rdev->wiphy.interface_modes & (1 << ntype)))
+ return -EOPNOTSUPP;
+
+ if (ntype != otype) {
+ switch (otype) {
+ case NL80211_IFTYPE_ADHOC:
+ cfg80211_leave_ibss(rdev, dev, false);
+ break;
+ case NL80211_IFTYPE_STATION:
+ cfg80211_disconnect(rdev, dev,
+ WLAN_REASON_DEAUTH_LEAVING, true);
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* mesh should be handled? */
+ break;
+ default:
+ break;
+ }
+
+ cfg80211_process_rdev_events(rdev);
+ }
+
+ err = rdev->ops->change_virtual_intf(&rdev->wiphy, dev,
+ ntype, flags, params);
+
+ WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype);
+
+ return err;
+}
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index d030c53..429dd06 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -14,6 +14,7 @@
#include <linux/etherdevice.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
+#include "wext-compat.h"
#include "core.h"
int cfg80211_wext_giwname(struct net_device *dev,
@@ -69,18 +70,8 @@
enum nl80211_iftype type;
int ret;
- if (!wdev)
- return -EOPNOTSUPP;
-
rdev = wiphy_to_dev(wdev->wiphy);
- if (!rdev->ops->change_virtual_intf)
- return -EOPNOTSUPP;
-
- /* don't support changing VLANs, you just re-create them */
- if (wdev->iftype == NL80211_IFTYPE_AP_VLAN)
- return -EOPNOTSUPP;
-
switch (*mode) {
case IW_MODE_INFRA:
type = NL80211_IFTYPE_STATION;
@@ -103,9 +94,9 @@
memset(&vifparams, 0, sizeof(vifparams));
- ret = rdev->ops->change_virtual_intf(wdev->wiphy, dev->ifindex, type,
- NULL, &vifparams);
- WARN_ON(!ret && wdev->iftype != type);
+ cfg80211_lock_rdev(rdev);
+ ret = cfg80211_change_iface(rdev, dev, type, NULL, &vifparams);
+ cfg80211_unlock_rdev(rdev);
return ret;
}
@@ -154,7 +145,7 @@
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct iw_range *range = (struct iw_range *) extra;
enum ieee80211_band band;
- int c = 0;
+ int i, c = 0;
if (!wdev)
return -EOPNOTSUPP;
@@ -173,9 +164,6 @@
range->min_frag = 256;
range->max_frag = 2346;
- range->encoding_size[0] = 5;
- range->encoding_size[1] = 13;
- range->num_encoding_sizes = 2;
range->max_encoding_tokens = 4;
range->max_qual.updated = IW_QUAL_NOISE_INVALID;
@@ -204,11 +192,31 @@
range->avg_qual.noise = range->max_qual.noise / 2;
range->avg_qual.updated = range->max_qual.updated;
- range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
- IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
+ for (i = 0; i < wdev->wiphy->n_cipher_suites; i++) {
+ switch (wdev->wiphy->cipher_suites[i]) {
+ case WLAN_CIPHER_SUITE_TKIP:
+ range->enc_capa |= (IW_ENC_CAPA_CIPHER_TKIP |
+ IW_ENC_CAPA_WPA);
+ break;
+
+ case WLAN_CIPHER_SUITE_CCMP:
+ range->enc_capa |= (IW_ENC_CAPA_CIPHER_CCMP |
+ IW_ENC_CAPA_WPA2);
+ break;
+
+ case WLAN_CIPHER_SUITE_WEP40:
+ range->encoding_size[range->num_encoding_sizes++] =
+ WLAN_KEY_LEN_WEP40;
+ break;
+
+ case WLAN_CIPHER_SUITE_WEP104:
+ range->encoding_size[range->num_encoding_sizes++] =
+ WLAN_KEY_LEN_WEP104;
+ break;
+ }
+ }
for (band = 0; band < IEEE80211_NUM_BANDS; band ++) {
- int i;
struct ieee80211_supported_band *sband;
sband = wdev->wiphy->bands[band];
@@ -236,97 +244,40 @@
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
- range->scan_capa |= IW_SCAN_CAPA_ESSID;
+ if (wdev->wiphy->max_scan_ssids > 0)
+ range->scan_capa |= IW_SCAN_CAPA_ESSID;
return 0;
}
EXPORT_SYMBOL_GPL(cfg80211_wext_giwrange);
-int cfg80211_wext_siwmlme(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra)
-{
- struct wireless_dev *wdev = dev->ieee80211_ptr;
- struct iw_mlme *mlme = (struct iw_mlme *)extra;
- struct cfg80211_registered_device *rdev;
- union {
- struct cfg80211_disassoc_request disassoc;
- struct cfg80211_deauth_request deauth;
- } cmd;
-
- if (!wdev)
- return -EOPNOTSUPP;
-
- rdev = wiphy_to_dev(wdev->wiphy);
-
- if (wdev->iftype != NL80211_IFTYPE_STATION)
- return -EINVAL;
-
- if (mlme->addr.sa_family != ARPHRD_ETHER)
- return -EINVAL;
-
- memset(&cmd, 0, sizeof(cmd));
-
- switch (mlme->cmd) {
- case IW_MLME_DEAUTH:
- if (!rdev->ops->deauth)
- return -EOPNOTSUPP;
- cmd.deauth.peer_addr = mlme->addr.sa_data;
- cmd.deauth.reason_code = mlme->reason_code;
- return rdev->ops->deauth(wdev->wiphy, dev, &cmd.deauth);
- case IW_MLME_DISASSOC:
- if (!rdev->ops->disassoc)
- return -EOPNOTSUPP;
- cmd.disassoc.peer_addr = mlme->addr.sa_data;
- cmd.disassoc.reason_code = mlme->reason_code;
- return rdev->ops->disassoc(wdev->wiphy, dev, &cmd.disassoc);
- default:
- return -EOPNOTSUPP;
- }
-}
-EXPORT_SYMBOL_GPL(cfg80211_wext_siwmlme);
-
/**
* cfg80211_wext_freq - get wext frequency for non-"auto"
* @wiphy: the wiphy
* @freq: the wext freq encoding
*
- * Returns a channel, %NULL for auto, or an ERR_PTR for errors!
+ * Returns a frequency, or a negative error code, or 0 for auto.
*/
-struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy,
- struct iw_freq *freq)
+int cfg80211_wext_freq(struct wiphy *wiphy, struct iw_freq *freq)
{
- struct ieee80211_channel *chan;
- int f;
-
/*
- * Parse frequency - return NULL for auto and
+ * Parse frequency - return 0 for auto and
* -EINVAL for impossible things.
*/
if (freq->e == 0) {
if (freq->m < 0)
- return NULL;
- f = ieee80211_channel_to_frequency(freq->m);
+ return 0;
+ return ieee80211_channel_to_frequency(freq->m);
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div <= 0)
- return ERR_PTR(-EINVAL);
- f = freq->m / div;
+ return -EINVAL;
+ return freq->m / div;
}
-
- /*
- * Look up channel struct and return -EINVAL when
- * it cannot be found.
- */
- chan = ieee80211_get_channel(wiphy, f);
- if (!chan)
- return ERR_PTR(-EINVAL);
- return chan;
}
-EXPORT_SYMBOL_GPL(cfg80211_wext_freq);
int cfg80211_wext_siwrts(struct net_device *dev,
struct iw_request_info *info,
@@ -479,15 +430,32 @@
}
EXPORT_SYMBOL_GPL(cfg80211_wext_giwretry);
-static int cfg80211_set_encryption(struct cfg80211_registered_device *rdev,
- struct net_device *dev, const u8 *addr,
- bool remove, bool tx_key, int idx,
- struct key_params *params)
+static int __cfg80211_set_encryption(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *addr,
+ bool remove, bool tx_key, int idx,
+ struct key_params *params)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- int err;
+ int err, i;
+
+ if (!wdev->wext.keys) {
+ wdev->wext.keys = kzalloc(sizeof(*wdev->wext.keys),
+ GFP_KERNEL);
+ if (!wdev->wext.keys)
+ return -ENOMEM;
+ for (i = 0; i < 6; i++)
+ wdev->wext.keys->params[i].key =
+ wdev->wext.keys->data[i];
+ }
+
+ if (wdev->iftype != NL80211_IFTYPE_ADHOC &&
+ wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC) {
+ if (!wdev->current_bss)
+ return -ENOLINK;
+
if (!rdev->ops->set_default_mgmt_key)
return -EOPNOTSUPP;
@@ -497,8 +465,14 @@
return -EINVAL;
if (remove) {
- err = rdev->ops->del_key(&rdev->wiphy, dev, idx, addr);
+ err = 0;
+ if (wdev->current_bss)
+ err = rdev->ops->del_key(&rdev->wiphy, dev, idx, addr);
if (!err) {
+ if (!addr) {
+ wdev->wext.keys->params[idx].key_len = 0;
+ wdev->wext.keys->params[idx].cipher = 0;
+ }
if (idx == wdev->wext.default_key)
wdev->wext.default_key = -1;
else if (idx == wdev->wext.default_mgmt_key)
@@ -512,36 +486,65 @@
return 0;
return err;
- } else {
- if (addr)
- tx_key = false;
+ }
- if (cfg80211_validate_key_settings(params, idx, addr))
- return -EINVAL;
+ if (addr)
+ tx_key = false;
+ if (cfg80211_validate_key_settings(rdev, params, idx, addr))
+ return -EINVAL;
+
+ err = 0;
+ if (wdev->current_bss)
err = rdev->ops->add_key(&rdev->wiphy, dev, idx, addr, params);
- if (err)
- return err;
+ if (err)
+ return err;
- if (tx_key || (!addr && wdev->wext.default_key == -1)) {
+ if (!addr) {
+ wdev->wext.keys->params[idx] = *params;
+ memcpy(wdev->wext.keys->data[idx],
+ params->key, params->key_len);
+ wdev->wext.keys->params[idx].key =
+ wdev->wext.keys->data[idx];
+ }
+
+ if ((params->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ params->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+ (tx_key || (!addr && wdev->wext.default_key == -1))) {
+ if (wdev->current_bss)
err = rdev->ops->set_default_key(&rdev->wiphy,
dev, idx);
- if (!err)
- wdev->wext.default_key = idx;
- return err;
- }
+ if (!err)
+ wdev->wext.default_key = idx;
+ return err;
+ }
- if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC &&
- (tx_key || (!addr && wdev->wext.default_mgmt_key == -1))) {
+ if (params->cipher == WLAN_CIPHER_SUITE_AES_CMAC &&
+ (tx_key || (!addr && wdev->wext.default_mgmt_key == -1))) {
+ if (wdev->current_bss)
err = rdev->ops->set_default_mgmt_key(&rdev->wiphy,
dev, idx);
- if (!err)
- wdev->wext.default_mgmt_key = idx;
- return err;
- }
-
- return 0;
+ if (!err)
+ wdev->wext.default_mgmt_key = idx;
+ return err;
}
+
+ return 0;
+}
+
+static int cfg80211_set_encryption(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *addr,
+ bool remove, bool tx_key, int idx,
+ struct key_params *params)
+{
+ int err;
+
+ wdev_lock(dev->ieee80211_ptr);
+ err = __cfg80211_set_encryption(rdev, dev, addr, remove,
+ tx_key, idx, params);
+ wdev_unlock(dev->ieee80211_ptr);
+
+ return err;
}
int cfg80211_wext_siwencode(struct net_device *dev,
@@ -554,6 +557,10 @@
bool remove = false;
struct key_params params;
+ if (wdev->iftype != NL80211_IFTYPE_STATION &&
+ wdev->iftype != NL80211_IFTYPE_ADHOC)
+ return -EOPNOTSUPP;
+
/* no use -- only MFP (set_default_mgmt_key) is optional */
if (!rdev->ops->del_key ||
!rdev->ops->add_key ||
@@ -574,9 +581,14 @@
remove = true;
else if (erq->length == 0) {
/* No key data - just set the default TX key index */
- err = rdev->ops->set_default_key(&rdev->wiphy, dev, idx);
+ err = 0;
+ wdev_lock(wdev);
+ if (wdev->current_bss)
+ err = rdev->ops->set_default_key(&rdev->wiphy,
+ dev, idx);
if (!err)
wdev->wext.default_key = idx;
+ wdev_unlock(wdev);
return err;
}
@@ -609,6 +621,10 @@
struct key_params params;
u32 cipher;
+ if (wdev->iftype != NL80211_IFTYPE_STATION &&
+ wdev->iftype != NL80211_IFTYPE_ADHOC)
+ return -EOPNOTSUPP;
+
/* no use -- only MFP (set_default_mgmt_key) is optional */
if (!rdev->ops->del_key ||
!rdev->ops->add_key ||
@@ -682,37 +698,15 @@
}
EXPORT_SYMBOL_GPL(cfg80211_wext_siwencodeext);
-struct giwencode_cookie {
- size_t buflen;
- char *keybuf;
-};
-
-static void giwencode_get_key_cb(void *cookie, struct key_params *params)
-{
- struct giwencode_cookie *data = cookie;
-
- if (!params->key) {
- data->buflen = 0;
- return;
- }
-
- data->buflen = min_t(size_t, data->buflen, params->key_len);
- memcpy(data->keybuf, params->key, data->buflen);
-}
-
int cfg80211_wext_giwencode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *keybuf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
- int idx, err;
- struct giwencode_cookie data = {
- .keybuf = keybuf,
- .buflen = erq->length,
- };
+ int idx;
- if (!rdev->ops->get_key)
+ if (wdev->iftype != NL80211_IFTYPE_STATION &&
+ wdev->iftype != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
idx = erq->flags & IW_ENCODE_INDEX;
@@ -727,24 +721,70 @@
erq->flags = idx + 1;
- err = rdev->ops->get_key(&rdev->wiphy, dev, idx, NULL, &data,
- giwencode_get_key_cb);
- if (!err) {
- erq->length = data.buflen;
- erq->flags |= IW_ENCODE_ENABLED;
- return 0;
- }
-
- if (err == -ENOENT) {
+ if (!wdev->wext.keys || !wdev->wext.keys->params[idx].cipher) {
erq->flags |= IW_ENCODE_DISABLED;
erq->length = 0;
return 0;
}
- return err;
+ erq->length = min_t(size_t, erq->length,
+ wdev->wext.keys->params[idx].key_len);
+ memcpy(keybuf, wdev->wext.keys->params[idx].key, erq->length);
+ erq->flags |= IW_ENCODE_ENABLED;
+
+ return 0;
}
EXPORT_SYMBOL_GPL(cfg80211_wext_giwencode);
+int cfg80211_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *wextfreq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ int freq, err;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ return cfg80211_mgd_wext_siwfreq(dev, info, wextfreq, extra);
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_ibss_wext_siwfreq(dev, info, wextfreq, extra);
+ default:
+ freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
+ if (freq < 0)
+ return freq;
+ if (freq == 0)
+ return -EINVAL;
+ mutex_lock(&rdev->devlist_mtx);
+ err = rdev_set_freq(rdev, NULL, freq, NL80211_CHAN_NO_HT);
+ mutex_unlock(&rdev->devlist_mtx);
+ return err;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwfreq);
+
+int cfg80211_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_STATION:
+ return cfg80211_mgd_wext_giwfreq(dev, info, freq, extra);
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
+ default:
+ if (!rdev->channel)
+ return -EINVAL;
+ freq->m = rdev->channel->center_freq;
+ freq->e = 6;
+ return 0;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwfreq);
+
int cfg80211_wext_siwtxpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *data, char *extra)
@@ -827,3 +867,547 @@
return 0;
}
EXPORT_SYMBOL_GPL(cfg80211_wext_giwtxpower);
+
+static int cfg80211_set_auth_alg(struct wireless_dev *wdev,
+ s32 auth_alg)
+{
+ int nr_alg = 0;
+
+ if (!auth_alg)
+ return -EINVAL;
+
+ if (auth_alg & ~(IW_AUTH_ALG_OPEN_SYSTEM |
+ IW_AUTH_ALG_SHARED_KEY |
+ IW_AUTH_ALG_LEAP))
+ return -EINVAL;
+
+ if (auth_alg & IW_AUTH_ALG_OPEN_SYSTEM) {
+ nr_alg++;
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM;
+ }
+
+ if (auth_alg & IW_AUTH_ALG_SHARED_KEY) {
+ nr_alg++;
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_SHARED_KEY;
+ }
+
+ if (auth_alg & IW_AUTH_ALG_LEAP) {
+ nr_alg++;
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_NETWORK_EAP;
+ }
+
+ if (nr_alg > 1)
+ wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+
+ return 0;
+}
+
+static int cfg80211_set_wpa_version(struct wireless_dev *wdev, u32 wpa_versions)
+{
+ wdev->wext.connect.crypto.wpa_versions = 0;
+
+ if (wpa_versions & ~(IW_AUTH_WPA_VERSION_WPA |
+ IW_AUTH_WPA_VERSION_WPA2|
+ IW_AUTH_WPA_VERSION_DISABLED))
+ return -EINVAL;
+
+ if ((wpa_versions & IW_AUTH_WPA_VERSION_DISABLED) &&
+ (wpa_versions & (IW_AUTH_WPA_VERSION_WPA|
+ IW_AUTH_WPA_VERSION_WPA2)))
+ return -EINVAL;
+
+ if (wpa_versions & IW_AUTH_WPA_VERSION_DISABLED)
+ wdev->wext.connect.crypto.wpa_versions &=
+ ~(NL80211_WPA_VERSION_1|NL80211_WPA_VERSION_2);
+
+ if (wpa_versions & IW_AUTH_WPA_VERSION_WPA)
+ wdev->wext.connect.crypto.wpa_versions |=
+ NL80211_WPA_VERSION_1;
+
+ if (wpa_versions & IW_AUTH_WPA_VERSION_WPA2)
+ wdev->wext.connect.crypto.wpa_versions |=
+ NL80211_WPA_VERSION_2;
+
+ return 0;
+}
+
+static int cfg80211_set_cipher_group(struct wireless_dev *wdev, u32 cipher)
+{
+ wdev->wext.connect.crypto.cipher_group = 0;
+
+ if (cipher & IW_AUTH_CIPHER_WEP40)
+ wdev->wext.connect.crypto.cipher_group =
+ WLAN_CIPHER_SUITE_WEP40;
+ else if (cipher & IW_AUTH_CIPHER_WEP104)
+ wdev->wext.connect.crypto.cipher_group =
+ WLAN_CIPHER_SUITE_WEP104;
+ else if (cipher & IW_AUTH_CIPHER_TKIP)
+ wdev->wext.connect.crypto.cipher_group =
+ WLAN_CIPHER_SUITE_TKIP;
+ else if (cipher & IW_AUTH_CIPHER_CCMP)
+ wdev->wext.connect.crypto.cipher_group =
+ WLAN_CIPHER_SUITE_CCMP;
+ else if (cipher & IW_AUTH_CIPHER_AES_CMAC)
+ wdev->wext.connect.crypto.cipher_group =
+ WLAN_CIPHER_SUITE_AES_CMAC;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+static int cfg80211_set_cipher_pairwise(struct wireless_dev *wdev, u32 cipher)
+{
+ int nr_ciphers = 0;
+ u32 *ciphers_pairwise = wdev->wext.connect.crypto.ciphers_pairwise;
+
+ if (cipher & IW_AUTH_CIPHER_WEP40) {
+ ciphers_pairwise[nr_ciphers] = WLAN_CIPHER_SUITE_WEP40;
+ nr_ciphers++;
+ }
+
+ if (cipher & IW_AUTH_CIPHER_WEP104) {
+ ciphers_pairwise[nr_ciphers] = WLAN_CIPHER_SUITE_WEP104;
+ nr_ciphers++;
+ }
+
+ if (cipher & IW_AUTH_CIPHER_TKIP) {
+ ciphers_pairwise[nr_ciphers] = WLAN_CIPHER_SUITE_TKIP;
+ nr_ciphers++;
+ }
+
+ if (cipher & IW_AUTH_CIPHER_CCMP) {
+ ciphers_pairwise[nr_ciphers] = WLAN_CIPHER_SUITE_CCMP;
+ nr_ciphers++;
+ }
+
+ if (cipher & IW_AUTH_CIPHER_AES_CMAC) {
+ ciphers_pairwise[nr_ciphers] = WLAN_CIPHER_SUITE_AES_CMAC;
+ nr_ciphers++;
+ }
+
+ BUILD_BUG_ON(NL80211_MAX_NR_CIPHER_SUITES < 5);
+
+ wdev->wext.connect.crypto.n_ciphers_pairwise = nr_ciphers;
+
+ return 0;
+}
+
+
+static int cfg80211_set_key_mgt(struct wireless_dev *wdev, u32 key_mgt)
+{
+ int nr_akm_suites = 0;
+
+ if (key_mgt & ~(IW_AUTH_KEY_MGMT_802_1X |
+ IW_AUTH_KEY_MGMT_PSK))
+ return -EINVAL;
+
+ if (key_mgt & IW_AUTH_KEY_MGMT_802_1X) {
+ wdev->wext.connect.crypto.akm_suites[nr_akm_suites] =
+ WLAN_AKM_SUITE_8021X;
+ nr_akm_suites++;
+ }
+
+ if (key_mgt & IW_AUTH_KEY_MGMT_PSK) {
+ wdev->wext.connect.crypto.akm_suites[nr_akm_suites] =
+ WLAN_AKM_SUITE_PSK;
+ nr_akm_suites++;
+ }
+
+ wdev->wext.connect.crypto.n_akm_suites = nr_akm_suites;
+
+ return 0;
+}
+
+int cfg80211_wext_siwauth(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *data, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
+ switch (data->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_PRIVACY_INVOKED:
+ wdev->wext.connect.privacy = data->value;
+ return 0;
+ case IW_AUTH_WPA_VERSION:
+ return cfg80211_set_wpa_version(wdev, data->value);
+ case IW_AUTH_CIPHER_GROUP:
+ return cfg80211_set_cipher_group(wdev, data->value);
+ case IW_AUTH_KEY_MGMT:
+ return cfg80211_set_key_mgt(wdev, data->value);
+ case IW_AUTH_CIPHER_PAIRWISE:
+ return cfg80211_set_cipher_pairwise(wdev, data->value);
+ case IW_AUTH_80211_AUTH_ALG:
+ return cfg80211_set_auth_alg(wdev, data->value);
+ case IW_AUTH_WPA_ENABLED:
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ case IW_AUTH_DROP_UNENCRYPTED:
+ case IW_AUTH_MFP:
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwauth);
+
+int cfg80211_wext_giwauth(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *data, char *extra)
+{
+ /* XXX: what do we need? */
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwauth);
+
+int cfg80211_wext_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ bool ps = wdev->wext.ps;
+ int timeout = wdev->wext.ps_timeout;
+ int err;
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EINVAL;
+
+ if (!rdev->ops->set_power_mgmt)
+ return -EOPNOTSUPP;
+
+ if (wrq->disabled) {
+ ps = false;
+ } else {
+ switch (wrq->flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ ps = true;
+ break;
+ default: /* Otherwise we ignore */
+ return -EINVAL;
+ }
+
+ if (wrq->flags & ~(IW_POWER_MODE | IW_POWER_TIMEOUT))
+ return -EINVAL;
+
+ if (wrq->flags & IW_POWER_TIMEOUT)
+ timeout = wrq->value / 1000;
+ }
+
+ err = rdev->ops->set_power_mgmt(wdev->wiphy, dev, ps, timeout);
+ if (err)
+ return err;
+
+ wdev->wext.ps = ps;
+ wdev->wext.ps_timeout = timeout;
+
+ return 0;
+
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwpower);
+
+int cfg80211_wext_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *wrq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ wrq->disabled = !wdev->wext.ps;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwpower);
+
+static int cfg80211_wds_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *addr, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ int err;
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_WDS))
+ return -EINVAL;
+
+ if (addr->sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ if (!rdev->ops->set_wds_peer)
+ return -EOPNOTSUPP;
+
+ err = rdev->ops->set_wds_peer(wdev->wiphy, dev, (u8 *) &addr->sa_data);
+ if (err)
+ return err;
+
+ memcpy(&wdev->wext.bssid, (u8 *) &addr->sa_data, ETH_ALEN);
+
+ return 0;
+}
+
+static int cfg80211_wds_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *addr, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_WDS))
+ return -EINVAL;
+
+ addr->sa_family = ARPHRD_ETHER;
+ memcpy(&addr->sa_data, wdev->wext.bssid, ETH_ALEN);
+
+ return 0;
+}
+
+int cfg80211_wext_siwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct cfg80211_bitrate_mask mask;
+
+ if (!rdev->ops->set_bitrate_mask)
+ return -EOPNOTSUPP;
+
+ mask.fixed = 0;
+ mask.maxrate = 0;
+
+ if (rate->value < 0) {
+ /* nothing */
+ } else if (rate->fixed) {
+ mask.fixed = rate->value / 1000; /* kbps */
+ } else {
+ mask.maxrate = rate->value / 1000; /* kbps */
+ }
+
+ return rdev->ops->set_bitrate_mask(wdev->wiphy, dev, NULL, &mask);
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwrate);
+
+int cfg80211_wext_giwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ /* we are under RTNL - globally locked - so can use a static struct */
+ static struct station_info sinfo;
+ u8 addr[ETH_ALEN];
+ int err;
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->get_station)
+ return -EOPNOTSUPP;
+
+ err = 0;
+ wdev_lock(wdev);
+ if (wdev->current_bss)
+ memcpy(addr, wdev->current_bss->pub.bssid, ETH_ALEN);
+ else
+ err = -EOPNOTSUPP;
+ wdev_unlock(wdev);
+ if (err)
+ return err;
+
+ err = rdev->ops->get_station(&rdev->wiphy, dev, addr, &sinfo);
+ if (err)
+ return err;
+
+ if (!(sinfo.filled & STATION_INFO_TX_BITRATE))
+ return -EOPNOTSUPP;
+
+ rate->value = 0;
+
+ if (!(sinfo.txrate.flags & RATE_INFO_FLAGS_MCS))
+ rate->value = 100000 * sinfo.txrate.legacy;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwrate);
+
+/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
+struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ /* we are under RTNL - globally locked - so can use static structs */
+ static struct iw_statistics wstats;
+ static struct station_info sinfo;
+ u8 bssid[ETH_ALEN];
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION)
+ return NULL;
+
+ if (!rdev->ops->get_station)
+ return NULL;
+
+ /* Grab BSSID of current BSS, if any */
+ wdev_lock(wdev);
+ if (!wdev->current_bss) {
+ wdev_unlock(wdev);
+ return NULL;
+ }
+ memcpy(bssid, wdev->current_bss->pub.bssid, ETH_ALEN);
+ wdev_unlock(wdev);
+
+ if (rdev->ops->get_station(&rdev->wiphy, dev, bssid, &sinfo))
+ return NULL;
+
+ memset(&wstats, 0, sizeof(wstats));
+
+ switch (rdev->wiphy.signal_type) {
+ case CFG80211_SIGNAL_TYPE_MBM:
+ if (sinfo.filled & STATION_INFO_SIGNAL) {
+ int sig = sinfo.signal;
+ wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
+ wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
+ wstats.qual.updated |= IW_QUAL_DBM;
+ wstats.qual.level = sig;
+ if (sig < -110)
+ sig = -110;
+ else if (sig > -40)
+ sig = -40;
+ wstats.qual.qual = sig + 110;
+ break;
+ }
+ case CFG80211_SIGNAL_TYPE_UNSPEC:
+ if (sinfo.filled & STATION_INFO_SIGNAL) {
+ wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
+ wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
+ wstats.qual.level = sinfo.signal;
+ wstats.qual.qual = sinfo.signal;
+ break;
+ }
+ default:
+ wstats.qual.updated |= IW_QUAL_LEVEL_INVALID;
+ wstats.qual.updated |= IW_QUAL_QUAL_INVALID;
+ }
+
+ wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
+
+ return &wstats;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wireless_stats);
+
+int cfg80211_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_ibss_wext_siwap(dev, info, ap_addr, extra);
+ case NL80211_IFTYPE_STATION:
+ return cfg80211_mgd_wext_siwap(dev, info, ap_addr, extra);
+ case NL80211_IFTYPE_WDS:
+ return cfg80211_wds_wext_siwap(dev, info, ap_addr, extra);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwap);
+
+int cfg80211_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_ibss_wext_giwap(dev, info, ap_addr, extra);
+ case NL80211_IFTYPE_STATION:
+ return cfg80211_mgd_wext_giwap(dev, info, ap_addr, extra);
+ case NL80211_IFTYPE_WDS:
+ return cfg80211_wds_wext_giwap(dev, info, ap_addr, extra);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwap);
+
+int cfg80211_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_ibss_wext_siwessid(dev, info, data, ssid);
+ case NL80211_IFTYPE_STATION:
+ return cfg80211_mgd_wext_siwessid(dev, info, data, ssid);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwessid);
+
+int cfg80211_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ switch (wdev->iftype) {
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_ibss_wext_giwessid(dev, info, data, ssid);
+ case NL80211_IFTYPE_STATION:
+ return cfg80211_mgd_wext_giwessid(dev, info, data, ssid);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_giwessid);
+
+static const iw_handler cfg80211_handlers[] = {
+ [IW_IOCTL_IDX(SIOCGIWNAME)] = (iw_handler) cfg80211_wext_giwname,
+ [IW_IOCTL_IDX(SIOCSIWFREQ)] = (iw_handler) cfg80211_wext_siwfreq,
+ [IW_IOCTL_IDX(SIOCGIWFREQ)] = (iw_handler) cfg80211_wext_giwfreq,
+ [IW_IOCTL_IDX(SIOCSIWMODE)] = (iw_handler) cfg80211_wext_siwmode,
+ [IW_IOCTL_IDX(SIOCGIWMODE)] = (iw_handler) cfg80211_wext_giwmode,
+ [IW_IOCTL_IDX(SIOCGIWRANGE)] = (iw_handler) cfg80211_wext_giwrange,
+ [IW_IOCTL_IDX(SIOCSIWAP)] = (iw_handler) cfg80211_wext_siwap,
+ [IW_IOCTL_IDX(SIOCGIWAP)] = (iw_handler) cfg80211_wext_giwap,
+ [IW_IOCTL_IDX(SIOCSIWMLME)] = (iw_handler) cfg80211_wext_siwmlme,
+ [IW_IOCTL_IDX(SIOCSIWSCAN)] = (iw_handler) cfg80211_wext_siwscan,
+ [IW_IOCTL_IDX(SIOCGIWSCAN)] = (iw_handler) cfg80211_wext_giwscan,
+ [IW_IOCTL_IDX(SIOCSIWESSID)] = (iw_handler) cfg80211_wext_siwessid,
+ [IW_IOCTL_IDX(SIOCGIWESSID)] = (iw_handler) cfg80211_wext_giwessid,
+ [IW_IOCTL_IDX(SIOCSIWRATE)] = (iw_handler) cfg80211_wext_siwrate,
+ [IW_IOCTL_IDX(SIOCGIWRATE)] = (iw_handler) cfg80211_wext_giwrate,
+ [IW_IOCTL_IDX(SIOCSIWRTS)] = (iw_handler) cfg80211_wext_siwrts,
+ [IW_IOCTL_IDX(SIOCGIWRTS)] = (iw_handler) cfg80211_wext_giwrts,
+ [IW_IOCTL_IDX(SIOCSIWFRAG)] = (iw_handler) cfg80211_wext_siwfrag,
+ [IW_IOCTL_IDX(SIOCGIWFRAG)] = (iw_handler) cfg80211_wext_giwfrag,
+ [IW_IOCTL_IDX(SIOCSIWTXPOW)] = (iw_handler) cfg80211_wext_siwtxpower,
+ [IW_IOCTL_IDX(SIOCGIWTXPOW)] = (iw_handler) cfg80211_wext_giwtxpower,
+ [IW_IOCTL_IDX(SIOCSIWRETRY)] = (iw_handler) cfg80211_wext_siwretry,
+ [IW_IOCTL_IDX(SIOCGIWRETRY)] = (iw_handler) cfg80211_wext_giwretry,
+ [IW_IOCTL_IDX(SIOCSIWENCODE)] = (iw_handler) cfg80211_wext_siwencode,
+ [IW_IOCTL_IDX(SIOCGIWENCODE)] = (iw_handler) cfg80211_wext_giwencode,
+ [IW_IOCTL_IDX(SIOCSIWPOWER)] = (iw_handler) cfg80211_wext_siwpower,
+ [IW_IOCTL_IDX(SIOCGIWPOWER)] = (iw_handler) cfg80211_wext_giwpower,
+ [IW_IOCTL_IDX(SIOCSIWGENIE)] = (iw_handler) cfg80211_wext_siwgenie,
+ [IW_IOCTL_IDX(SIOCSIWAUTH)] = (iw_handler) cfg80211_wext_siwauth,
+ [IW_IOCTL_IDX(SIOCGIWAUTH)] = (iw_handler) cfg80211_wext_giwauth,
+ [IW_IOCTL_IDX(SIOCSIWENCODEEXT)]= (iw_handler) cfg80211_wext_siwencodeext,
+};
+
+const struct iw_handler_def cfg80211_wext_handler = {
+ .num_standard = ARRAY_SIZE(cfg80211_handlers),
+ .standard = cfg80211_handlers,
+ .get_wireless_stats = cfg80211_wireless_stats,
+};
diff --git a/net/wireless/wext-compat.h b/net/wireless/wext-compat.h
new file mode 100644
index 0000000..20b3dae
--- /dev/null
+++ b/net/wireless/wext-compat.h
@@ -0,0 +1,49 @@
+#ifndef __WEXT_COMPAT
+#define __WEXT_COMPAT
+
+#include <net/iw_handler.h>
+#include <linux/wireless.h>
+
+int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_ibss_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_ibss_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_ibss_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_ibss_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+
+int cfg80211_mgd_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_mgd_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra);
+int cfg80211_mgd_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_mgd_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra);
+int cfg80211_mgd_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+int cfg80211_mgd_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid);
+
+int cfg80211_wext_freq(struct wiphy *wiphy, struct iw_freq *freq);
+
+
+extern const struct iw_handler_def cfg80211_wext_handler;
+#endif /* __WEXT_COMPAT */
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
new file mode 100644
index 0000000..d16cd9e
--- /dev/null
+++ b/net/wireless/wext-sme.c
@@ -0,0 +1,404 @@
+/*
+ * cfg80211 wext compat for managed mode.
+ *
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <net/cfg80211.h>
+#include "wext-compat.h"
+#include "nl80211.h"
+
+int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ struct cfg80211_cached_keys *ck = NULL;
+ const u8 *prev_bssid = NULL;
+ int err, i;
+
+ ASSERT_RDEV_LOCK(rdev);
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (!netif_running(wdev->netdev))
+ return 0;
+
+ wdev->wext.connect.ie = wdev->wext.ie;
+ wdev->wext.connect.ie_len = wdev->wext.ie_len;
+ wdev->wext.connect.privacy = wdev->wext.default_key != -1;
+
+ if (wdev->wext.keys) {
+ wdev->wext.keys->def = wdev->wext.default_key;
+ wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key;
+ }
+
+ if (!wdev->wext.connect.ssid_len)
+ return 0;
+
+ if (wdev->wext.keys) {
+ ck = kmemdup(wdev->wext.keys, sizeof(*ck), GFP_KERNEL);
+ if (!ck)
+ return -ENOMEM;
+ for (i = 0; i < 6; i++)
+ ck->params[i].key = ck->data[i];
+ }
+
+ if (wdev->wext.prev_bssid_valid)
+ prev_bssid = wdev->wext.prev_bssid;
+
+ err = __cfg80211_connect(rdev, wdev->netdev,
+ &wdev->wext.connect, ck, prev_bssid);
+ if (err)
+ kfree(ck);
+
+ return err;
+}
+
+int cfg80211_mgd_wext_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *wextfreq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ struct ieee80211_channel *chan = NULL;
+ int err, freq;
+
+ /* call only for station! */
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return -EINVAL;
+
+ freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
+ if (freq < 0)
+ return freq;
+
+ if (freq) {
+ chan = ieee80211_get_channel(wdev->wiphy, freq);
+ if (!chan)
+ return -EINVAL;
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ return -EINVAL;
+ }
+
+ cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+
+ if (wdev->sme_state != CFG80211_SME_IDLE) {
+ bool event = true;
+
+ if (wdev->wext.connect.channel == chan) {
+ err = 0;
+ goto out;
+ }
+
+ /* if SSID set, we'll try right again, avoid event */
+ if (wdev->wext.connect.ssid_len)
+ event = false;
+ err = __cfg80211_disconnect(rdev, dev,
+ WLAN_REASON_DEAUTH_LEAVING, event);
+ if (err)
+ goto out;
+ }
+
+
+ wdev->wext.connect.channel = chan;
+
+ /* SSID is not set, we just want to switch channel */
+ if (chan && !wdev->wext.connect.ssid_len) {
+ err = rdev_set_freq(rdev, wdev, freq, NL80211_CHAN_NO_HT);
+ goto out;
+ }
+
+ err = cfg80211_mgd_wext_connect(rdev, wdev);
+ out:
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+ cfg80211_unlock_rdev(rdev);
+ return err;
+}
+
+int cfg80211_mgd_wext_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct ieee80211_channel *chan = NULL;
+
+ /* call only for station! */
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return -EINVAL;
+
+ wdev_lock(wdev);
+ if (wdev->current_bss)
+ chan = wdev->current_bss->pub.channel;
+ else if (wdev->wext.connect.channel)
+ chan = wdev->wext.connect.channel;
+ wdev_unlock(wdev);
+
+ if (chan) {
+ freq->m = chan->center_freq;
+ freq->e = 6;
+ return 0;
+ }
+
+ /* no channel if not joining */
+ return -EINVAL;
+}
+
+int cfg80211_mgd_wext_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ size_t len = data->length;
+ int err;
+
+ /* call only for station! */
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return -EINVAL;
+
+ if (!data->flags)
+ len = 0;
+
+ /* iwconfig uses nul termination in SSID.. */
+ if (len > 0 && ssid[len - 1] == '\0')
+ len--;
+
+ cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+
+ err = 0;
+
+ if (wdev->sme_state != CFG80211_SME_IDLE) {
+ bool event = true;
+
+ if (wdev->wext.connect.ssid && len &&
+ len == wdev->wext.connect.ssid_len &&
+ memcmp(wdev->wext.connect.ssid, ssid, len) == 0)
+ goto out;
+
+ /* if SSID set now, we'll try to connect, avoid event */
+ if (len)
+ event = false;
+ err = __cfg80211_disconnect(rdev, dev,
+ WLAN_REASON_DEAUTH_LEAVING, event);
+ if (err)
+ goto out;
+ }
+
+ wdev->wext.prev_bssid_valid = false;
+ wdev->wext.connect.ssid = wdev->wext.ssid;
+ memcpy(wdev->wext.ssid, ssid, len);
+ wdev->wext.connect.ssid_len = len;
+
+ wdev->wext.connect.crypto.control_port = false;
+
+ err = cfg80211_mgd_wext_connect(rdev, wdev);
+ out:
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+ cfg80211_unlock_rdev(rdev);
+ return err;
+}
+
+int cfg80211_mgd_wext_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ /* call only for station! */
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return -EINVAL;
+
+ data->flags = 0;
+
+ wdev_lock(wdev);
+ if (wdev->current_bss) {
+ const u8 *ie = ieee80211_bss_get_ie(&wdev->current_bss->pub,
+ WLAN_EID_SSID);
+ if (ie) {
+ data->flags = 1;
+ data->length = ie[1];
+ memcpy(ssid, ie + 2, data->length);
+ }
+ } else if (wdev->wext.connect.ssid && wdev->wext.connect.ssid_len) {
+ data->flags = 1;
+ data->length = wdev->wext.connect.ssid_len;
+ memcpy(ssid, wdev->wext.connect.ssid, data->length);
+ } else
+ data->flags = 0;
+ wdev_unlock(wdev);
+
+ return 0;
+}
+
+int cfg80211_mgd_wext_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ u8 *bssid = ap_addr->sa_data;
+ int err;
+
+ /* call only for station! */
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return -EINVAL;
+
+ if (ap_addr->sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ /* automatic mode */
+ if (is_zero_ether_addr(bssid) || is_broadcast_ether_addr(bssid))
+ bssid = NULL;
+
+ cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->devlist_mtx);
+ wdev_lock(wdev);
+
+ if (wdev->sme_state != CFG80211_SME_IDLE) {
+ err = 0;
+ /* both automatic */
+ if (!bssid && !wdev->wext.connect.bssid)
+ goto out;
+
+ /* fixed already - and no change */
+ if (wdev->wext.connect.bssid && bssid &&
+ compare_ether_addr(bssid, wdev->wext.connect.bssid) == 0)
+ goto out;
+
+ err = __cfg80211_disconnect(rdev, dev,
+ WLAN_REASON_DEAUTH_LEAVING, false);
+ if (err)
+ goto out;
+ }
+
+ if (bssid) {
+ memcpy(wdev->wext.bssid, bssid, ETH_ALEN);
+ wdev->wext.connect.bssid = wdev->wext.bssid;
+ } else
+ wdev->wext.connect.bssid = NULL;
+
+ err = cfg80211_mgd_wext_connect(rdev, wdev);
+ out:
+ wdev_unlock(wdev);
+ mutex_unlock(&rdev->devlist_mtx);
+ cfg80211_unlock_rdev(rdev);
+ return err;
+}
+
+int cfg80211_mgd_wext_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ /* call only for station! */
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
+ return -EINVAL;
+
+ ap_addr->sa_family = ARPHRD_ETHER;
+
+ wdev_lock(wdev);
+ if (wdev->current_bss)
+ memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN);
+ else if (wdev->wext.connect.bssid)
+ memcpy(ap_addr->sa_data, wdev->wext.connect.bssid, ETH_ALEN);
+ else
+ memset(ap_addr->sa_data, 0, ETH_ALEN);
+ wdev_unlock(wdev);
+
+ return 0;
+}
+
+int cfg80211_wext_siwgenie(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+ u8 *ie = extra;
+ int ie_len = data->length, err;
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
+ if (!ie_len)
+ ie = NULL;
+
+ wdev_lock(wdev);
+
+ /* no change */
+ err = 0;
+ if (wdev->wext.ie_len == ie_len &&
+ memcmp(wdev->wext.ie, ie, ie_len) == 0)
+ goto out;
+
+ if (ie_len) {
+ ie = kmemdup(extra, ie_len, GFP_KERNEL);
+ if (!ie) {
+ err = -ENOMEM;
+ goto out;
+ }
+ } else
+ ie = NULL;
+
+ kfree(wdev->wext.ie);
+ wdev->wext.ie = ie;
+ wdev->wext.ie_len = ie_len;
+
+ if (wdev->sme_state != CFG80211_SME_IDLE) {
+ err = __cfg80211_disconnect(rdev, dev,
+ WLAN_REASON_DEAUTH_LEAVING, false);
+ if (err)
+ goto out;
+ }
+
+ /* userspace better not think we'll reconnect */
+ err = 0;
+ out:
+ wdev_unlock(wdev);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwgenie);
+
+int cfg80211_wext_siwmlme(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct iw_mlme *mlme = (struct iw_mlme *)extra;
+ struct cfg80211_registered_device *rdev;
+ int err;
+
+ if (!wdev)
+ return -EOPNOTSUPP;
+
+ rdev = wiphy_to_dev(wdev->wiphy);
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION)
+ return -EINVAL;
+
+ if (mlme->addr.sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ wdev_lock(wdev);
+ switch (mlme->cmd) {
+ case IW_MLME_DEAUTH:
+ case IW_MLME_DISASSOC:
+ err = __cfg80211_disconnect(rdev, dev, mlme->reason_code,
+ true);
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+ wdev_unlock(wdev);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cfg80211_wext_siwmlme);
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
index 252c201..5b4a0ce 100644
--- a/net/wireless/wext.c
+++ b/net/wireless/wext.c
@@ -417,6 +417,21 @@
IW_EV_QUAL_LEN, /* IW_HEADER_TYPE_QUAL */
};
+#ifdef CONFIG_COMPAT
+static const int compat_event_type_size[] = {
+ IW_EV_COMPAT_LCP_LEN, /* IW_HEADER_TYPE_NULL */
+ 0,
+ IW_EV_COMPAT_CHAR_LEN, /* IW_HEADER_TYPE_CHAR */
+ 0,
+ IW_EV_COMPAT_UINT_LEN, /* IW_HEADER_TYPE_UINT */
+ IW_EV_COMPAT_FREQ_LEN, /* IW_HEADER_TYPE_FREQ */
+ IW_EV_COMPAT_ADDR_LEN, /* IW_HEADER_TYPE_ADDR */
+ 0,
+ IW_EV_COMPAT_POINT_LEN, /* Without variable payload */
+ IW_EV_COMPAT_PARAM_LEN, /* IW_HEADER_TYPE_PARAM */
+ IW_EV_COMPAT_QUAL_LEN, /* IW_HEADER_TYPE_QUAL */
+};
+#endif
/************************ COMMON SUBROUTINES ************************/
/*
@@ -610,6 +625,11 @@
{
/* Get stats from the driver */
struct iw_statistics *stats = get_wireless_stats(dev);
+ static struct iw_statistics nullstats = {};
+
+ /* show device if it's wireless regardless of current stats */
+ if (!stats && dev->wireless_handlers)
+ stats = &nullstats;
if (stats) {
seq_printf(seq, "%6s: %04x %3d%c %3d%c %3d%c %6d %6d %6d "
@@ -628,7 +648,9 @@
stats->discard.nwid, stats->discard.code,
stats->discard.fragment, stats->discard.retries,
stats->discard.misc, stats->miss.beacon);
- stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
+
+ if (stats != &nullstats)
+ stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
}
}
@@ -1250,65 +1272,57 @@
}
#endif
-/************************* EVENT PROCESSING *************************/
-/*
- * Process events generated by the wireless layer or the driver.
- * Most often, the event will be propagated through rtnetlink
- */
+static int __net_init wext_pernet_init(struct net *net)
+{
+ skb_queue_head_init(&net->wext_nlevents);
+ return 0;
+}
-/* ---------------------------------------------------------------- */
-/*
- * Locking...
- * ----------
- *
- * Thanks to Herbert Xu <herbert@gondor.apana.org.au> for fixing
- * the locking issue in here and implementing this code !
- *
- * The issue : wireless_send_event() is often called in interrupt context,
- * while the Netlink layer can never be called in interrupt context.
- * The fully formed RtNetlink events are queued, and then a tasklet is run
- * to feed those to Netlink.
- * The skb_queue is interrupt safe, and its lock is not held while calling
- * Netlink, so there is no possibility of dealock.
- * Jean II
- */
+static void __net_exit wext_pernet_exit(struct net *net)
+{
+ skb_queue_purge(&net->wext_nlevents);
+}
-static struct sk_buff_head wireless_nlevent_queue;
+static struct pernet_operations wext_pernet_ops = {
+ .init = wext_pernet_init,
+ .exit = wext_pernet_exit,
+};
static int __init wireless_nlevent_init(void)
{
- skb_queue_head_init(&wireless_nlevent_queue);
- return 0;
+ return register_pernet_subsys(&wext_pernet_ops);
}
subsys_initcall(wireless_nlevent_init);
-static void wireless_nlevent_process(unsigned long data)
+/* Process events generated by the wireless layer or the driver. */
+static void wireless_nlevent_process(struct work_struct *work)
{
struct sk_buff *skb;
+ struct net *net;
- while ((skb = skb_dequeue(&wireless_nlevent_queue)))
- rtnl_notify(skb, &init_net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
+ rtnl_lock();
+
+ for_each_net(net) {
+ while ((skb = skb_dequeue(&net->wext_nlevents)))
+ rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
+ GFP_KERNEL);
+ }
+
+ rtnl_unlock();
}
-static DECLARE_TASKLET(wireless_nlevent_tasklet, wireless_nlevent_process, 0);
+static DECLARE_WORK(wireless_nlevent_work, wireless_nlevent_process);
-/* ---------------------------------------------------------------- */
-/*
- * Fill a rtnetlink message with our event data.
- * Note that we propage only the specified event and don't dump the
- * current wireless config. Dumping the wireless config is far too
- * expensive (for each parameter, the driver need to query the hardware).
- */
-static int rtnetlink_fill_iwinfo(struct sk_buff *skb, struct net_device *dev,
- int type, char *event, int event_len)
+static struct nlmsghdr *rtnetlink_ifinfo_prep(struct net_device *dev,
+ struct sk_buff *skb)
{
struct ifinfomsg *r;
struct nlmsghdr *nlh;
- nlh = nlmsg_put(skb, 0, 0, type, sizeof(*r), 0);
- if (nlh == NULL)
- return -EMSGSIZE;
+ nlh = nlmsg_put(skb, 0, 0, RTM_NEWLINK, sizeof(*r), 0);
+ if (!nlh)
+ return NULL;
r = nlmsg_data(nlh);
r->ifi_family = AF_UNSPEC;
@@ -1319,48 +1333,14 @@
r->ifi_change = 0; /* Wireless changes don't affect those flags */
NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
- /* Add the wireless events in the netlink packet */
- NLA_PUT(skb, IFLA_WIRELESS, event_len, event);
- return nlmsg_end(skb, nlh);
-
-nla_put_failure:
+ return nlh;
+ nla_put_failure:
nlmsg_cancel(skb, nlh);
- return -EMSGSIZE;
+ return NULL;
}
-/* ---------------------------------------------------------------- */
-/*
- * Create and broadcast and send it on the standard rtnetlink socket
- * This is a pure clone rtmsg_ifinfo() in net/core/rtnetlink.c
- * Andrzej Krzysztofowicz mandated that I used a IFLA_XXX field
- * within a RTM_NEWLINK event.
- */
-static void rtmsg_iwinfo(struct net_device *dev, char *event, int event_len)
-{
- struct sk_buff *skb;
- int err;
- if (!net_eq(dev_net(dev), &init_net))
- return;
-
- skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
- if (!skb)
- return;
-
- err = rtnetlink_fill_iwinfo(skb, dev, RTM_NEWLINK, event, event_len);
- if (err < 0) {
- WARN_ON(err == -EMSGSIZE);
- kfree_skb(skb);
- return;
- }
-
- NETLINK_CB(skb).dst_group = RTNLGRP_LINK;
- skb_queue_tail(&wireless_nlevent_queue, skb);
- tasklet_schedule(&wireless_nlevent_tasklet);
-}
-
-/* ---------------------------------------------------------------- */
/*
* Main event dispatcher. Called from other parts and drivers.
* Send the event on the appropriate channels.
@@ -1369,7 +1349,7 @@
void wireless_send_event(struct net_device * dev,
unsigned int cmd,
union iwreq_data * wrqu,
- char * extra)
+ const char * extra)
{
const struct iw_ioctl_description * descr = NULL;
int extra_len = 0;
@@ -1379,6 +1359,25 @@
int wrqu_off = 0; /* Offset in wrqu */
/* Don't "optimise" the following variable, it will crash */
unsigned cmd_index; /* *MUST* be unsigned */
+ struct sk_buff *skb;
+ struct nlmsghdr *nlh;
+ struct nlattr *nla;
+#ifdef CONFIG_COMPAT
+ struct __compat_iw_event *compat_event;
+ struct compat_iw_point compat_wrqu;
+ struct sk_buff *compskb;
+#endif
+
+ /*
+ * Nothing in the kernel sends scan events with data, be safe.
+ * This is necessary because we cannot fix up scan event data
+ * for compat, due to being contained in 'extra', but normally
+ * applications are required to retrieve the scan data anyway
+ * and no data is included in the event, this codifies that
+ * practice.
+ */
+ if (WARN_ON(cmd == SIOCGIWSCAN && extra))
+ extra = NULL;
/* Get the description of the Event */
if (cmd <= SIOCIWLAST) {
@@ -1426,25 +1425,107 @@
hdr_len = event_type_size[descr->header_type];
event_len = hdr_len + extra_len;
- /* Create temporary buffer to hold the event */
- event = kmalloc(event_len, GFP_ATOMIC);
- if (event == NULL)
+ /*
+ * The problem for 64/32 bit.
+ *
+ * On 64-bit, a regular event is laid out as follows:
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | event.len | event.cmd | p a d d i n g |
+ * | wrqu data ... (with the correct size) |
+ *
+ * This padding exists because we manipulate event->u,
+ * and 'event' is not packed.
+ *
+ * An iw_point event is laid out like this instead:
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | event.len | event.cmd | p a d d i n g |
+ * | iwpnt.len | iwpnt.flg | p a d d i n g |
+ * | extra data ...
+ *
+ * The second padding exists because struct iw_point is extended,
+ * but this depends on the platform...
+ *
+ * On 32-bit, all the padding shouldn't be there.
+ */
+
+ skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ if (!skb)
return;
- /* Fill event */
+ /* Send via the RtNetlink event channel */
+ nlh = rtnetlink_ifinfo_prep(dev, skb);
+ if (WARN_ON(!nlh)) {
+ kfree_skb(skb);
+ return;
+ }
+
+ /* Add the wireless events in the netlink packet */
+ nla = nla_reserve(skb, IFLA_WIRELESS, event_len);
+ if (!nla) {
+ kfree_skb(skb);
+ return;
+ }
+ event = nla_data(nla);
+
+ /* Fill event - first clear to avoid data leaking */
+ memset(event, 0, hdr_len);
event->len = event_len;
event->cmd = cmd;
memcpy(&event->u, ((char *) wrqu) + wrqu_off, hdr_len - IW_EV_LCP_LEN);
- if (extra)
+ if (extra_len)
memcpy(((char *) event) + hdr_len, extra, extra_len);
+ nlmsg_end(skb, nlh);
+#ifdef CONFIG_COMPAT
+ hdr_len = compat_event_type_size[descr->header_type];
+ event_len = hdr_len + extra_len;
+
+ compskb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ if (!compskb) {
+ kfree_skb(skb);
+ return;
+ }
+
/* Send via the RtNetlink event channel */
- rtmsg_iwinfo(dev, (char *) event, event_len);
+ nlh = rtnetlink_ifinfo_prep(dev, compskb);
+ if (WARN_ON(!nlh)) {
+ kfree_skb(skb);
+ kfree_skb(compskb);
+ return;
+ }
- /* Cleanup */
- kfree(event);
+ /* Add the wireless events in the netlink packet */
+ nla = nla_reserve(compskb, IFLA_WIRELESS, event_len);
+ if (!nla) {
+ kfree_skb(skb);
+ kfree_skb(compskb);
+ return;
+ }
+ compat_event = nla_data(nla);
- return; /* Always success, I guess ;-) */
+ compat_event->len = event_len;
+ compat_event->cmd = cmd;
+ if (descr->header_type == IW_HEADER_TYPE_POINT) {
+ compat_wrqu.length = wrqu->data.length;
+ compat_wrqu.flags = wrqu->data.flags;
+ memcpy(&compat_event->pointer,
+ ((char *) &compat_wrqu) + IW_EV_COMPAT_POINT_OFF,
+ hdr_len - IW_EV_COMPAT_LCP_LEN);
+ if (extra_len)
+ memcpy(((char *) compat_event) + hdr_len,
+ extra, extra_len);
+ } else {
+ /* extra_len must be zero, so no if (extra) needed */
+ memcpy(&compat_event->pointer, wrqu,
+ hdr_len - IW_EV_COMPAT_LCP_LEN);
+ }
+
+ nlmsg_end(compskb, nlh);
+
+ skb_shinfo(skb)->frag_list = compskb;
+#endif
+ skb_queue_tail(&dev_net(dev)->wext_nlevents, skb);
+ schedule_work(&wireless_nlevent_work);
}
EXPORT_SYMBOL(wireless_send_event);
diff --git a/net/xfrm/xfrm_proc.c b/net/xfrm/xfrm_proc.c
index a2adb51..fef8db5 100644
--- a/net/xfrm/xfrm_proc.c
+++ b/net/xfrm/xfrm_proc.c
@@ -60,7 +60,7 @@
return single_open_net(inode, file, xfrm_statistics_seq_show);
}
-static struct file_operations xfrm_statistics_seq_fops = {
+static const struct file_operations xfrm_statistics_seq_fops = {
.owner = THIS_MODULE,
.open = xfrm_statistics_seq_open,
.read = seq_read,
diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
index 4e764b3..1041b67 100644
--- a/samples/kprobes/kretprobe_example.c
+++ b/samples/kprobes/kretprobe_example.c
@@ -23,6 +23,7 @@
#include <linux/kprobes.h>
#include <linux/ktime.h>
#include <linux/limits.h>
+#include <linux/sched.h>
static char func_name[NAME_MAX] = "do_fork";
module_param_string(func, func_name, NAME_MAX, S_IRUGO);
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 911ba7f..090d300 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -57,7 +57,6 @@
# call mcount (offset: 0x5)
# [...]
# ret
-# .globl my_func
# other_func:
# [...]
# call mcount (offset: 0x1b)
diff --git a/security/Makefile b/security/Makefile
index b56e7f9..95ecc06 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -16,9 +16,7 @@
# Must precede capability.o in order to stack properly.
obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o
obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o
-ifeq ($(CONFIG_AUDIT),y)
-obj-$(CONFIG_SECURITY_SMACK) += lsm_audit.o
-endif
+obj-$(CONFIG_AUDIT) += lsm_audit.o
obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o
obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o
obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o
diff --git a/security/capability.c b/security/capability.c
index 88f752e..fce07a7 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -373,6 +373,11 @@
return 0;
}
+static int cap_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ return 0;
+}
+
static void cap_cred_free(struct cred *cred)
{
}
@@ -386,6 +391,10 @@
{
}
+static void cap_cred_transfer(struct cred *new, const struct cred *old)
+{
+}
+
static int cap_kernel_act_as(struct cred *new, u32 secid)
{
return 0;
@@ -396,6 +405,11 @@
return 0;
}
+static int cap_kernel_module_request(void)
+{
+ return 0;
+}
+
static int cap_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags)
{
return 0;
@@ -701,10 +715,26 @@
{
}
+
+
static void cap_req_classify_flow(const struct request_sock *req,
struct flowi *fl)
{
}
+
+static int cap_tun_dev_create(void)
+{
+ return 0;
+}
+
+static void cap_tun_dev_post_create(struct sock *sk)
+{
+}
+
+static int cap_tun_dev_attach(struct sock *sk)
+{
+ return 0;
+}
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
@@ -792,6 +822,20 @@
{
}
+static int cap_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return 0;
+}
+
+static int cap_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return 0;
+}
+
+static int cap_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ return 0;
+}
#ifdef CONFIG_KEYS
static int cap_key_alloc(struct key *key, const struct cred *cred,
unsigned long flags)
@@ -815,6 +859,13 @@
return 0;
}
+static int cap_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key)
+{
+ return 0;
+}
+
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
@@ -854,7 +905,7 @@
void security_fixup_ops(struct security_operations *ops)
{
- set_to_cap_if_null(ops, ptrace_may_access);
+ set_to_cap_if_null(ops, ptrace_access_check);
set_to_cap_if_null(ops, ptrace_traceme);
set_to_cap_if_null(ops, capget);
set_to_cap_if_null(ops, capset);
@@ -940,11 +991,14 @@
set_to_cap_if_null(ops, file_receive);
set_to_cap_if_null(ops, dentry_open);
set_to_cap_if_null(ops, task_create);
+ set_to_cap_if_null(ops, cred_alloc_blank);
set_to_cap_if_null(ops, cred_free);
set_to_cap_if_null(ops, cred_prepare);
set_to_cap_if_null(ops, cred_commit);
+ set_to_cap_if_null(ops, cred_transfer);
set_to_cap_if_null(ops, kernel_act_as);
set_to_cap_if_null(ops, kernel_create_files_as);
+ set_to_cap_if_null(ops, kernel_module_request);
set_to_cap_if_null(ops, task_setuid);
set_to_cap_if_null(ops, task_fix_setuid);
set_to_cap_if_null(ops, task_setgid);
@@ -992,6 +1046,9 @@
set_to_cap_if_null(ops, secid_to_secctx);
set_to_cap_if_null(ops, secctx_to_secid);
set_to_cap_if_null(ops, release_secctx);
+ set_to_cap_if_null(ops, inode_notifysecctx);
+ set_to_cap_if_null(ops, inode_setsecctx);
+ set_to_cap_if_null(ops, inode_getsecctx);
#ifdef CONFIG_SECURITY_NETWORK
set_to_cap_if_null(ops, unix_stream_connect);
set_to_cap_if_null(ops, unix_may_send);
@@ -1020,6 +1077,9 @@
set_to_cap_if_null(ops, inet_csk_clone);
set_to_cap_if_null(ops, inet_conn_established);
set_to_cap_if_null(ops, req_classify_flow);
+ set_to_cap_if_null(ops, tun_dev_create);
+ set_to_cap_if_null(ops, tun_dev_post_create);
+ set_to_cap_if_null(ops, tun_dev_attach);
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
set_to_cap_if_null(ops, xfrm_policy_alloc_security);
@@ -1038,6 +1098,7 @@
set_to_cap_if_null(ops, key_free);
set_to_cap_if_null(ops, key_permission);
set_to_cap_if_null(ops, key_getsecurity);
+ set_to_cap_if_null(ops, key_session_to_parent);
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
set_to_cap_if_null(ops, audit_rule_init);
diff --git a/security/commoncap.c b/security/commoncap.c
index e3097c0..fe30751 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -101,7 +101,7 @@
}
/**
- * cap_ptrace_may_access - Determine whether the current process may access
+ * cap_ptrace_access_check - Determine whether the current process may access
* another
* @child: The process to be accessed
* @mode: The mode of attachment.
@@ -109,7 +109,7 @@
* Determine whether a process may access another, returning 0 if permission
* granted, -ve if denied.
*/
-int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
+int cap_ptrace_access_check(struct task_struct *child, unsigned int mode)
{
int ret = 0;
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 63003a6..46642a1 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -45,9 +45,9 @@
{
struct hash_desc desc;
struct scatterlist sg[1];
- loff_t i_size;
+ loff_t i_size, offset = 0;
char *rbuf;
- int rc, offset = 0;
+ int rc;
rc = init_desc(&desc);
if (rc != 0)
@@ -67,6 +67,8 @@
rc = rbuf_len;
break;
}
+ if (rbuf_len == 0)
+ break;
offset += rbuf_len;
sg_init_one(sg, rbuf, rbuf_len);
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 101c512..b85e61b 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -249,7 +249,11 @@
struct inode *inode = path->dentry->d_inode;
struct ima_iint_cache *iint;
- if (!ima_initialized || !S_ISREG(inode->i_mode))
+ /* The inode may already have been freed, freeing the iint
+ * with it. Verify the inode is not NULL before dereferencing
+ * it.
+ */
+ if (!ima_initialized || !inode || !S_ISREG(inode->i_mode))
return;
iint = ima_iint_find_insert_get(inode);
if (!iint)
@@ -262,6 +266,8 @@
else if (mask & (MAY_READ | MAY_EXEC))
iint->readcount--;
mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
}
/*
@@ -291,6 +297,8 @@
if (file->f_mode & FMODE_WRITE)
iint->writecount++;
mutex_unlock(&iint->mutex);
+
+ kref_put(&iint->refcount, iint_free);
}
EXPORT_SYMBOL_GPL(ima_counts_get);
diff --git a/security/keys/Makefile b/security/keys/Makefile
index 747a464..74d5447 100644
--- a/security/keys/Makefile
+++ b/security/keys/Makefile
@@ -3,6 +3,7 @@
#
obj-y := \
+ gc.o \
key.o \
keyring.o \
keyctl.o \
diff --git a/security/keys/compat.c b/security/keys/compat.c
index c766c68..792c0a6 100644
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -82,6 +82,9 @@
case KEYCTL_GET_SECURITY:
return keyctl_get_security(arg2, compat_ptr(arg3), arg4);
+ case KEYCTL_SESSION_TO_PARENT:
+ return keyctl_session_to_parent();
+
default:
return -EOPNOTSUPP;
}
diff --git a/security/keys/gc.c b/security/keys/gc.c
new file mode 100644
index 0000000..1e616ae
--- /dev/null
+++ b/security/keys/gc.c
@@ -0,0 +1,194 @@
+/* Key garbage collector
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <keys/keyring-type.h>
+#include "internal.h"
+
+/*
+ * Delay between key revocation/expiry in seconds
+ */
+unsigned key_gc_delay = 5 * 60;
+
+/*
+ * Reaper
+ */
+static void key_gc_timer_func(unsigned long);
+static void key_garbage_collector(struct work_struct *);
+static DEFINE_TIMER(key_gc_timer, key_gc_timer_func, 0, 0);
+static DECLARE_WORK(key_gc_work, key_garbage_collector);
+static key_serial_t key_gc_cursor; /* the last key the gc considered */
+static unsigned long key_gc_executing;
+static time_t key_gc_next_run = LONG_MAX;
+
+/*
+ * Schedule a garbage collection run
+ * - precision isn't particularly important
+ */
+void key_schedule_gc(time_t gc_at)
+{
+ unsigned long expires;
+ time_t now = current_kernel_time().tv_sec;
+
+ kenter("%ld", gc_at - now);
+
+ gc_at += key_gc_delay;
+
+ if (now >= gc_at) {
+ schedule_work(&key_gc_work);
+ } else if (gc_at < key_gc_next_run) {
+ expires = jiffies + (gc_at - now) * HZ;
+ mod_timer(&key_gc_timer, expires);
+ }
+}
+
+/*
+ * The garbage collector timer kicked off
+ */
+static void key_gc_timer_func(unsigned long data)
+{
+ kenter("");
+ key_gc_next_run = LONG_MAX;
+ schedule_work(&key_gc_work);
+}
+
+/*
+ * Garbage collect pointers from a keyring
+ * - return true if we altered the keyring
+ */
+static bool key_gc_keyring(struct key *keyring, time_t limit)
+ __releases(key_serial_lock)
+{
+ struct keyring_list *klist;
+ struct key *key;
+ int loop;
+
+ kenter("%x", key_serial(keyring));
+
+ if (test_bit(KEY_FLAG_REVOKED, &keyring->flags))
+ goto dont_gc;
+
+ /* scan the keyring looking for dead keys */
+ klist = rcu_dereference(keyring->payload.subscriptions);
+ if (!klist)
+ goto dont_gc;
+
+ for (loop = klist->nkeys - 1; loop >= 0; loop--) {
+ key = klist->keys[loop];
+ if (test_bit(KEY_FLAG_DEAD, &key->flags) ||
+ (key->expiry > 0 && key->expiry <= limit))
+ goto do_gc;
+ }
+
+dont_gc:
+ kleave(" = false");
+ return false;
+
+do_gc:
+ key_gc_cursor = keyring->serial;
+ key_get(keyring);
+ spin_unlock(&key_serial_lock);
+ keyring_gc(keyring, limit);
+ key_put(keyring);
+ kleave(" = true");
+ return true;
+}
+
+/*
+ * Garbage collector for keys
+ * - this involves scanning the keyrings for dead, expired and revoked keys
+ * that have overstayed their welcome
+ */
+static void key_garbage_collector(struct work_struct *work)
+{
+ struct rb_node *rb;
+ key_serial_t cursor;
+ struct key *key, *xkey;
+ time_t new_timer = LONG_MAX, limit;
+
+ kenter("");
+
+ if (test_and_set_bit(0, &key_gc_executing)) {
+ key_schedule_gc(current_kernel_time().tv_sec);
+ return;
+ }
+
+ limit = current_kernel_time().tv_sec;
+ if (limit > key_gc_delay)
+ limit -= key_gc_delay;
+ else
+ limit = key_gc_delay;
+
+ spin_lock(&key_serial_lock);
+
+ if (RB_EMPTY_ROOT(&key_serial_tree))
+ goto reached_the_end;
+
+ cursor = key_gc_cursor;
+ if (cursor < 0)
+ cursor = 0;
+
+ /* find the first key above the cursor */
+ key = NULL;
+ rb = key_serial_tree.rb_node;
+ while (rb) {
+ xkey = rb_entry(rb, struct key, serial_node);
+ if (cursor < xkey->serial) {
+ key = xkey;
+ rb = rb->rb_left;
+ } else if (cursor > xkey->serial) {
+ rb = rb->rb_right;
+ } else {
+ rb = rb_next(rb);
+ if (!rb)
+ goto reached_the_end;
+ key = rb_entry(rb, struct key, serial_node);
+ break;
+ }
+ }
+
+ if (!key)
+ goto reached_the_end;
+
+ /* trawl through the keys looking for keyrings */
+ for (;;) {
+ if (key->expiry > 0 && key->expiry < new_timer)
+ new_timer = key->expiry;
+
+ if (key->type == &key_type_keyring &&
+ key_gc_keyring(key, limit)) {
+ /* the gc ate our lock */
+ schedule_work(&key_gc_work);
+ goto no_unlock;
+ }
+
+ rb = rb_next(&key->serial_node);
+ if (!rb) {
+ key_gc_cursor = 0;
+ break;
+ }
+ key = rb_entry(rb, struct key, serial_node);
+ }
+
+out:
+ spin_unlock(&key_serial_lock);
+no_unlock:
+ clear_bit(0, &key_gc_executing);
+ if (new_timer < LONG_MAX)
+ key_schedule_gc(new_timer);
+
+ kleave("");
+ return;
+
+reached_the_end:
+ key_gc_cursor = 0;
+ goto out;
+}
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 9fb679c..24ba030 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -124,11 +124,18 @@
struct key *dest_keyring,
unsigned long flags);
-extern key_ref_t lookup_user_key(key_serial_t id, int create, int partial,
+extern key_ref_t lookup_user_key(key_serial_t id, unsigned long flags,
key_perm_t perm);
+#define KEY_LOOKUP_CREATE 0x01
+#define KEY_LOOKUP_PARTIAL 0x02
+#define KEY_LOOKUP_FOR_UNLINK 0x04
extern long join_session_keyring(const char *name);
+extern unsigned key_gc_delay;
+extern void keyring_gc(struct key *keyring, time_t limit);
+extern void key_schedule_gc(time_t expiry_at);
+
/*
* check to see whether permission is granted to use a key in the desired way
*/
@@ -194,6 +201,7 @@
extern long keyctl_assume_authority(key_serial_t);
extern long keyctl_get_security(key_serial_t keyid, char __user *buffer,
size_t buflen);
+extern long keyctl_session_to_parent(void);
/*
* debugging key validation
diff --git a/security/keys/key.c b/security/keys/key.c
index 4a1297d..08531ad 100644
--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -500,6 +500,7 @@
set_bit(KEY_FLAG_INSTANTIATED, &key->flags);
now = current_kernel_time();
key->expiry = now.tv_sec + timeout;
+ key_schedule_gc(key->expiry);
if (test_and_clear_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags))
awaken = 1;
@@ -642,10 +643,8 @@
goto error;
found:
- /* pretend it doesn't exist if it's dead */
- if (atomic_read(&key->usage) == 0 ||
- test_bit(KEY_FLAG_DEAD, &key->flags) ||
- key->type == &key_type_dead)
+ /* pretend it doesn't exist if it is awaiting deletion */
+ if (atomic_read(&key->usage) == 0)
goto not_found;
/* this races with key_put(), but that doesn't matter since key_put()
@@ -890,6 +889,9 @@
*/
void key_revoke(struct key *key)
{
+ struct timespec now;
+ time_t time;
+
key_check(key);
/* make sure no one's trying to change or use the key when we mark it
@@ -902,6 +904,14 @@
key->type->revoke)
key->type->revoke(key);
+ /* set the death time to no more than the expiry time */
+ now = current_kernel_time();
+ time = now.tv_sec;
+ if (key->revoked_at == 0 || key->revoked_at > time) {
+ key->revoked_at = time;
+ key_schedule_gc(key->revoked_at);
+ }
+
up_write(&key->sem);
} /* end key_revoke() */
@@ -958,8 +968,10 @@
for (_n = rb_first(&key_serial_tree); _n; _n = rb_next(_n)) {
key = rb_entry(_n, struct key, serial_node);
- if (key->type == ktype)
+ if (key->type == ktype) {
key->type = &key_type_dead;
+ set_bit(KEY_FLAG_DEAD, &key->flags);
+ }
}
spin_unlock(&key_serial_lock);
@@ -984,6 +996,8 @@
spin_unlock(&key_serial_lock);
up_write(&key_types_sem);
+ key_schedule_gc(0);
+
} /* end unregister_key_type() */
EXPORT_SYMBOL(unregister_key_type);
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 7f09fb8..74c9685 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -103,7 +103,7 @@
}
/* find the target keyring (which must be writable) */
- keyring_ref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error3;
@@ -185,7 +185,8 @@
/* get the destination keyring if specified */
dest_ref = NULL;
if (destringid) {
- dest_ref = lookup_user_key(destringid, 1, 0, KEY_WRITE);
+ dest_ref = lookup_user_key(destringid, KEY_LOOKUP_CREATE,
+ KEY_WRITE);
if (IS_ERR(dest_ref)) {
ret = PTR_ERR(dest_ref);
goto error3;
@@ -233,9 +234,11 @@
long keyctl_get_keyring_ID(key_serial_t id, int create)
{
key_ref_t key_ref;
+ unsigned long lflags;
long ret;
- key_ref = lookup_user_key(id, create, 0, KEY_SEARCH);
+ lflags = create ? KEY_LOOKUP_CREATE : 0;
+ key_ref = lookup_user_key(id, lflags, KEY_SEARCH);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
@@ -309,7 +312,7 @@
}
/* find the target key (which must be writable) */
- key_ref = lookup_user_key(id, 0, 0, KEY_WRITE);
+ key_ref = lookup_user_key(id, 0, KEY_WRITE);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
@@ -337,10 +340,16 @@
key_ref_t key_ref;
long ret;
- key_ref = lookup_user_key(id, 0, 0, KEY_WRITE);
+ key_ref = lookup_user_key(id, 0, KEY_WRITE);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
- goto error;
+ if (ret != -EACCES)
+ goto error;
+ key_ref = lookup_user_key(id, 0, KEY_SETATTR);
+ if (IS_ERR(key_ref)) {
+ ret = PTR_ERR(key_ref);
+ goto error;
+ }
}
key_revoke(key_ref_to_ptr(key_ref));
@@ -363,7 +372,7 @@
key_ref_t keyring_ref;
long ret;
- keyring_ref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
@@ -389,13 +398,13 @@
key_ref_t keyring_ref, key_ref;
long ret;
- keyring_ref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
}
- key_ref = lookup_user_key(id, 1, 0, KEY_LINK);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE, KEY_LINK);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
@@ -423,13 +432,13 @@
key_ref_t keyring_ref, key_ref;
long ret;
- keyring_ref = lookup_user_key(ringid, 0, 0, KEY_WRITE);
+ keyring_ref = lookup_user_key(ringid, 0, KEY_WRITE);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error;
}
- key_ref = lookup_user_key(id, 0, 0, 0);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_FOR_UNLINK, 0);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error2;
@@ -465,7 +474,7 @@
char *tmpbuf;
long ret;
- key_ref = lookup_user_key(keyid, 0, 1, KEY_VIEW);
+ key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_VIEW);
if (IS_ERR(key_ref)) {
/* viewing a key under construction is permitted if we have the
* authorisation token handy */
@@ -474,7 +483,8 @@
if (!IS_ERR(instkey)) {
key_put(instkey);
key_ref = lookup_user_key(keyid,
- 0, 1, 0);
+ KEY_LOOKUP_PARTIAL,
+ 0);
if (!IS_ERR(key_ref))
goto okay;
}
@@ -558,7 +568,7 @@
}
/* get the keyring at which to begin the search */
- keyring_ref = lookup_user_key(ringid, 0, 0, KEY_SEARCH);
+ keyring_ref = lookup_user_key(ringid, 0, KEY_SEARCH);
if (IS_ERR(keyring_ref)) {
ret = PTR_ERR(keyring_ref);
goto error2;
@@ -567,7 +577,8 @@
/* get the destination keyring if specified */
dest_ref = NULL;
if (destringid) {
- dest_ref = lookup_user_key(destringid, 1, 0, KEY_WRITE);
+ dest_ref = lookup_user_key(destringid, KEY_LOOKUP_CREATE,
+ KEY_WRITE);
if (IS_ERR(dest_ref)) {
ret = PTR_ERR(dest_ref);
goto error3;
@@ -637,7 +648,7 @@
long ret;
/* find the key first */
- key_ref = lookup_user_key(keyid, 0, 0, 0);
+ key_ref = lookup_user_key(keyid, 0, 0);
if (IS_ERR(key_ref)) {
ret = -ENOKEY;
goto error;
@@ -700,7 +711,8 @@
if (uid == (uid_t) -1 && gid == (gid_t) -1)
goto error;
- key_ref = lookup_user_key(id, 1, 1, KEY_SETATTR);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
+ KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
@@ -805,7 +817,8 @@
if (perm & ~(KEY_POS_ALL | KEY_USR_ALL | KEY_GRP_ALL | KEY_OTH_ALL))
goto error;
- key_ref = lookup_user_key(id, 1, 1, KEY_SETATTR);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
+ KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
@@ -847,7 +860,7 @@
/* if a specific keyring is nominated by ID, then use that */
if (ringid > 0) {
- dkref = lookup_user_key(ringid, 1, 0, KEY_WRITE);
+ dkref = lookup_user_key(ringid, KEY_LOOKUP_CREATE, KEY_WRITE);
if (IS_ERR(dkref))
return PTR_ERR(dkref);
*_dest_keyring = key_ref_to_ptr(dkref);
@@ -1083,7 +1096,8 @@
time_t expiry;
long ret;
- key_ref = lookup_user_key(id, 1, 1, KEY_SETATTR);
+ key_ref = lookup_user_key(id, KEY_LOOKUP_CREATE | KEY_LOOKUP_PARTIAL,
+ KEY_SETATTR);
if (IS_ERR(key_ref)) {
ret = PTR_ERR(key_ref);
goto error;
@@ -1101,6 +1115,7 @@
}
key->expiry = expiry;
+ key_schedule_gc(key->expiry);
up_write(&key->sem);
key_put(key);
@@ -1170,7 +1185,7 @@
char *context;
long ret;
- key_ref = lookup_user_key(keyid, 0, 1, KEY_VIEW);
+ key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_VIEW);
if (IS_ERR(key_ref)) {
if (PTR_ERR(key_ref) != -EACCES)
return PTR_ERR(key_ref);
@@ -1182,7 +1197,7 @@
return PTR_ERR(key_ref);
key_put(instkey);
- key_ref = lookup_user_key(keyid, 0, 1, 0);
+ key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, 0);
if (IS_ERR(key_ref))
return PTR_ERR(key_ref);
}
@@ -1213,6 +1228,105 @@
return ret;
}
+/*
+ * attempt to install the calling process's session keyring on the process's
+ * parent process
+ * - the keyring must exist and must grant us LINK permission
+ * - implements keyctl(KEYCTL_SESSION_TO_PARENT)
+ */
+long keyctl_session_to_parent(void)
+{
+ struct task_struct *me, *parent;
+ const struct cred *mycred, *pcred;
+ struct cred *cred, *oldcred;
+ key_ref_t keyring_r;
+ int ret;
+
+ keyring_r = lookup_user_key(KEY_SPEC_SESSION_KEYRING, 0, KEY_LINK);
+ if (IS_ERR(keyring_r))
+ return PTR_ERR(keyring_r);
+
+ /* our parent is going to need a new cred struct, a new tgcred struct
+ * and new security data, so we allocate them here to prevent ENOMEM in
+ * our parent */
+ ret = -ENOMEM;
+ cred = cred_alloc_blank();
+ if (!cred)
+ goto error_keyring;
+
+ cred->tgcred->session_keyring = key_ref_to_ptr(keyring_r);
+ keyring_r = NULL;
+
+ me = current;
+ write_lock_irq(&tasklist_lock);
+
+ parent = me->real_parent;
+ ret = -EPERM;
+
+ /* the parent mustn't be init and mustn't be a kernel thread */
+ if (parent->pid <= 1 || !parent->mm)
+ goto not_permitted;
+
+ /* the parent must be single threaded */
+ if (atomic_read(&parent->signal->count) != 1)
+ goto not_permitted;
+
+ /* the parent and the child must have different session keyrings or
+ * there's no point */
+ mycred = current_cred();
+ pcred = __task_cred(parent);
+ if (mycred == pcred ||
+ mycred->tgcred->session_keyring == pcred->tgcred->session_keyring)
+ goto already_same;
+
+ /* the parent must have the same effective ownership and mustn't be
+ * SUID/SGID */
+ if (pcred-> uid != mycred->euid ||
+ pcred->euid != mycred->euid ||
+ pcred->suid != mycred->euid ||
+ pcred-> gid != mycred->egid ||
+ pcred->egid != mycred->egid ||
+ pcred->sgid != mycred->egid)
+ goto not_permitted;
+
+ /* the keyrings must have the same UID */
+ if (pcred ->tgcred->session_keyring->uid != mycred->euid ||
+ mycred->tgcred->session_keyring->uid != mycred->euid)
+ goto not_permitted;
+
+ /* the LSM must permit the replacement of the parent's keyring with the
+ * keyring from this process */
+ ret = security_key_session_to_parent(mycred, pcred,
+ key_ref_to_ptr(keyring_r));
+ if (ret < 0)
+ goto not_permitted;
+
+ /* if there's an already pending keyring replacement, then we replace
+ * that */
+ oldcred = parent->replacement_session_keyring;
+
+ /* the replacement session keyring is applied just prior to userspace
+ * restarting */
+ parent->replacement_session_keyring = cred;
+ cred = NULL;
+ set_ti_thread_flag(task_thread_info(parent), TIF_NOTIFY_RESUME);
+
+ write_unlock_irq(&tasklist_lock);
+ if (oldcred)
+ put_cred(oldcred);
+ return 0;
+
+already_same:
+ ret = 0;
+not_permitted:
+ put_cred(cred);
+ return ret;
+
+error_keyring:
+ key_ref_put(keyring_r);
+ return ret;
+}
+
/*****************************************************************************/
/*
* the key control system call
@@ -1298,6 +1412,9 @@
(char __user *) arg3,
(size_t) arg4);
+ case KEYCTL_SESSION_TO_PARENT:
+ return keyctl_session_to_parent();
+
default:
return -EOPNOTSUPP;
}
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index 3dba81c..ac977f6 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -1000,3 +1000,88 @@
}
} /* end keyring_revoke() */
+
+/*
+ * Determine whether a key is dead
+ */
+static bool key_is_dead(struct key *key, time_t limit)
+{
+ return test_bit(KEY_FLAG_DEAD, &key->flags) ||
+ (key->expiry > 0 && key->expiry <= limit);
+}
+
+/*
+ * Collect garbage from the contents of a keyring
+ */
+void keyring_gc(struct key *keyring, time_t limit)
+{
+ struct keyring_list *klist, *new;
+ struct key *key;
+ int loop, keep, max;
+
+ kenter("%x", key_serial(keyring));
+
+ down_write(&keyring->sem);
+
+ klist = keyring->payload.subscriptions;
+ if (!klist)
+ goto just_return;
+
+ /* work out how many subscriptions we're keeping */
+ keep = 0;
+ for (loop = klist->nkeys - 1; loop >= 0; loop--)
+ if (!key_is_dead(klist->keys[loop], limit));
+ keep++;
+
+ if (keep == klist->nkeys)
+ goto just_return;
+
+ /* allocate a new keyring payload */
+ max = roundup(keep, 4);
+ new = kmalloc(sizeof(struct keyring_list) + max * sizeof(struct key *),
+ GFP_KERNEL);
+ if (!new)
+ goto just_return;
+ new->maxkeys = max;
+ new->nkeys = 0;
+ new->delkey = 0;
+
+ /* install the live keys
+ * - must take care as expired keys may be updated back to life
+ */
+ keep = 0;
+ for (loop = klist->nkeys - 1; loop >= 0; loop--) {
+ key = klist->keys[loop];
+ if (!key_is_dead(key, limit)) {
+ if (keep >= max)
+ goto discard_new;
+ new->keys[keep++] = key_get(key);
+ }
+ }
+ new->nkeys = keep;
+
+ /* adjust the quota */
+ key_payload_reserve(keyring,
+ sizeof(struct keyring_list) +
+ KEYQUOTA_LINK_BYTES * keep);
+
+ if (keep == 0) {
+ rcu_assign_pointer(keyring->payload.subscriptions, NULL);
+ kfree(new);
+ } else {
+ rcu_assign_pointer(keyring->payload.subscriptions, new);
+ }
+
+ up_write(&keyring->sem);
+
+ call_rcu(&klist->rcu, keyring_clear_rcu_disposal);
+ kleave(" [yes]");
+ return;
+
+discard_new:
+ new->nkeys = keep;
+ keyring_clear_rcu_disposal(&new->rcu);
+just_return:
+ up_write(&keyring->sem);
+ kleave(" [no]");
+}
diff --git a/security/keys/proc.c b/security/keys/proc.c
index 769f9bd..9d01021 100644
--- a/security/keys/proc.c
+++ b/security/keys/proc.c
@@ -91,59 +91,94 @@
*/
#ifdef CONFIG_KEYS_DEBUG_PROC_KEYS
-static struct rb_node *__key_serial_next(struct rb_node *n)
+static struct rb_node *key_serial_next(struct rb_node *n)
{
+ struct user_namespace *user_ns = current_user_ns();
+
+ n = rb_next(n);
while (n) {
struct key *key = rb_entry(n, struct key, serial_node);
- if (key->user->user_ns == current_user_ns())
+ if (key->user->user_ns == user_ns)
break;
n = rb_next(n);
}
return n;
}
-static struct rb_node *key_serial_next(struct rb_node *n)
-{
- return __key_serial_next(rb_next(n));
-}
-
-static struct rb_node *key_serial_first(struct rb_root *r)
-{
- struct rb_node *n = rb_first(r);
- return __key_serial_next(n);
-}
-
static int proc_keys_open(struct inode *inode, struct file *file)
{
return seq_open(file, &proc_keys_ops);
+}
+static struct key *find_ge_key(key_serial_t id)
+{
+ struct user_namespace *user_ns = current_user_ns();
+ struct rb_node *n = key_serial_tree.rb_node;
+ struct key *minkey = NULL;
+
+ while (n) {
+ struct key *key = rb_entry(n, struct key, serial_node);
+ if (id < key->serial) {
+ if (!minkey || minkey->serial > key->serial)
+ minkey = key;
+ n = n->rb_left;
+ } else if (id > key->serial) {
+ n = n->rb_right;
+ } else {
+ minkey = key;
+ break;
+ }
+ key = NULL;
+ }
+
+ if (!minkey)
+ return NULL;
+
+ for (;;) {
+ if (minkey->user->user_ns == user_ns)
+ return minkey;
+ n = rb_next(&minkey->serial_node);
+ if (!n)
+ return NULL;
+ minkey = rb_entry(n, struct key, serial_node);
+ }
}
static void *proc_keys_start(struct seq_file *p, loff_t *_pos)
+ __acquires(key_serial_lock)
{
- struct rb_node *_p;
- loff_t pos = *_pos;
+ key_serial_t pos = *_pos;
+ struct key *key;
spin_lock(&key_serial_lock);
- _p = key_serial_first(&key_serial_tree);
- while (pos > 0 && _p) {
- pos--;
- _p = key_serial_next(_p);
- }
+ if (*_pos > INT_MAX)
+ return NULL;
+ key = find_ge_key(pos);
+ if (!key)
+ return NULL;
+ *_pos = key->serial;
+ return &key->serial_node;
+}
- return _p;
-
+static inline key_serial_t key_node_serial(struct rb_node *n)
+{
+ struct key *key = rb_entry(n, struct key, serial_node);
+ return key->serial;
}
static void *proc_keys_next(struct seq_file *p, void *v, loff_t *_pos)
{
- (*_pos)++;
- return key_serial_next((struct rb_node *) v);
+ struct rb_node *n;
+ n = key_serial_next(v);
+ if (n)
+ *_pos = key_node_serial(n);
+ return n;
}
static void proc_keys_stop(struct seq_file *p, void *v)
+ __releases(key_serial_lock)
{
spin_unlock(&key_serial_lock);
}
@@ -174,11 +209,9 @@
/* come up with a suitable timeout value */
if (key->expiry == 0) {
memcpy(xbuf, "perm", 5);
- }
- else if (now.tv_sec >= key->expiry) {
+ } else if (now.tv_sec >= key->expiry) {
memcpy(xbuf, "expd", 5);
- }
- else {
+ } else {
timo = key->expiry - now.tv_sec;
if (timo < 60)
@@ -218,9 +251,7 @@
seq_putc(m, '\n');
rcu_read_unlock();
-
return 0;
-
}
#endif /* CONFIG_KEYS_DEBUG_PROC_KEYS */
@@ -246,6 +277,7 @@
struct rb_node *n = rb_first(r);
return __key_user_next(n);
}
+
/*****************************************************************************/
/*
* implement "/proc/key-users" to provides a list of the key users
@@ -253,10 +285,10 @@
static int proc_key_users_open(struct inode *inode, struct file *file)
{
return seq_open(file, &proc_key_users_ops);
-
}
static void *proc_key_users_start(struct seq_file *p, loff_t *_pos)
+ __acquires(key_user_lock)
{
struct rb_node *_p;
loff_t pos = *_pos;
@@ -270,17 +302,16 @@
}
return _p;
-
}
static void *proc_key_users_next(struct seq_file *p, void *v, loff_t *_pos)
{
(*_pos)++;
return key_user_next((struct rb_node *) v);
-
}
static void proc_key_users_stop(struct seq_file *p, void *v)
+ __releases(key_user_lock)
{
spin_unlock(&key_user_lock);
}
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 276d278..5c23afb 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -17,6 +17,7 @@
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/security.h>
#include <linux/user_namespace.h>
#include <asm/uaccess.h>
#include "internal.h"
@@ -487,7 +488,7 @@
* - don't create special keyrings unless so requested
* - partially constructed keys aren't found unless requested
*/
-key_ref_t lookup_user_key(key_serial_t id, int create, int partial,
+key_ref_t lookup_user_key(key_serial_t id, unsigned long lflags,
key_perm_t perm)
{
struct request_key_auth *rka;
@@ -503,7 +504,7 @@
switch (id) {
case KEY_SPEC_THREAD_KEYRING:
if (!cred->thread_keyring) {
- if (!create)
+ if (!(lflags & KEY_LOOKUP_CREATE))
goto error;
ret = install_thread_keyring();
@@ -521,7 +522,7 @@
case KEY_SPEC_PROCESS_KEYRING:
if (!cred->tgcred->process_keyring) {
- if (!create)
+ if (!(lflags & KEY_LOOKUP_CREATE))
goto error;
ret = install_process_keyring();
@@ -642,7 +643,14 @@
break;
}
- if (!partial) {
+ /* unlink does not use the nominated key in any way, so can skip all
+ * the permission checks as it is only concerned with the keyring */
+ if (lflags & KEY_LOOKUP_FOR_UNLINK) {
+ ret = 0;
+ goto error;
+ }
+
+ if (!(lflags & KEY_LOOKUP_PARTIAL)) {
ret = wait_for_key_construction(key, true);
switch (ret) {
case -ERESTARTSYS:
@@ -660,7 +668,8 @@
}
ret = -EIO;
- if (!partial && !test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
+ if (!(lflags & KEY_LOOKUP_PARTIAL) &&
+ !test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
goto invalid_key;
/* check the permissions */
@@ -702,7 +711,7 @@
/* only permit this if there's a single thread in the thread group -
* this avoids us having to adjust the creds on all threads and risking
* ENOMEM */
- if (!is_single_threaded(current))
+ if (!current_is_single_threaded())
return -EMLINK;
new = prepare_creds();
@@ -760,3 +769,51 @@
abort_creds(new);
return ret;
}
+
+/*
+ * Replace a process's session keyring when that process resumes userspace on
+ * behalf of one of its children
+ */
+void key_replace_session_keyring(void)
+{
+ const struct cred *old;
+ struct cred *new;
+
+ if (!current->replacement_session_keyring)
+ return;
+
+ write_lock_irq(&tasklist_lock);
+ new = current->replacement_session_keyring;
+ current->replacement_session_keyring = NULL;
+ write_unlock_irq(&tasklist_lock);
+
+ if (!new)
+ return;
+
+ old = current_cred();
+ new-> uid = old-> uid;
+ new-> euid = old-> euid;
+ new-> suid = old-> suid;
+ new->fsuid = old->fsuid;
+ new-> gid = old-> gid;
+ new-> egid = old-> egid;
+ new-> sgid = old-> sgid;
+ new->fsgid = old->fsgid;
+ new->user = get_uid(old->user);
+ new->group_info = get_group_info(old->group_info);
+
+ new->securebits = old->securebits;
+ new->cap_inheritable = old->cap_inheritable;
+ new->cap_permitted = old->cap_permitted;
+ new->cap_effective = old->cap_effective;
+ new->cap_bset = old->cap_bset;
+
+ new->jit_keyring = old->jit_keyring;
+ new->thread_keyring = key_get(old->thread_keyring);
+ new->tgcred->tgid = old->tgcred->tgid;
+ new->tgcred->process_keyring = key_get(old->tgcred->process_keyring);
+
+ security_transfer_creds(new, old);
+
+ commit_creds(new);
+}
diff --git a/security/keys/sysctl.c b/security/keys/sysctl.c
index b611d49..5e05dc0 100644
--- a/security/keys/sysctl.c
+++ b/security/keys/sysctl.c
@@ -13,6 +13,8 @@
#include <linux/sysctl.h>
#include "internal.h"
+static const int zero, one = 1, max = INT_MAX;
+
ctl_table key_sysctls[] = {
{
.ctl_name = CTL_UNNUMBERED,
@@ -20,7 +22,9 @@
.data = &key_quota_maxkeys,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
},
{
.ctl_name = CTL_UNNUMBERED,
@@ -28,7 +32,9 @@
.data = &key_quota_maxbytes,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
},
{
.ctl_name = CTL_UNNUMBERED,
@@ -36,7 +42,9 @@
.data = &key_quota_root_maxkeys,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
},
{
.ctl_name = CTL_UNNUMBERED,
@@ -44,7 +52,19 @@
.data = &key_quota_root_maxbytes,
.maxlen = sizeof(unsigned),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &one,
+ .extra2 = (void *) &max,
+ },
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "gc_delay",
+ .data = &key_gc_delay,
+ .maxlen = sizeof(unsigned),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = (void *) &zero,
+ .extra2 = (void *) &max,
},
{ .ctl_name = 0 }
};
diff --git a/security/lsm_audit.c b/security/lsm_audit.c
index 94b8684..500aad0 100644
--- a/security/lsm_audit.c
+++ b/security/lsm_audit.c
@@ -220,6 +220,8 @@
}
switch (a->type) {
+ case LSM_AUDIT_NO_AUDIT:
+ return;
case LSM_AUDIT_DATA_IPC:
audit_log_format(ab, " key=%d ", a->u.ipc_id);
break;
diff --git a/security/security.c b/security/security.c
index dc7674f..c4c6732 100644
--- a/security/security.c
+++ b/security/security.c
@@ -124,9 +124,9 @@
/* Security operations */
-int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
+int security_ptrace_access_check(struct task_struct *child, unsigned int mode)
{
- return security_ops->ptrace_may_access(child, mode);
+ return security_ops->ptrace_access_check(child, mode);
}
int security_ptrace_traceme(struct task_struct *parent)
@@ -684,6 +684,11 @@
return security_ops->task_create(clone_flags);
}
+int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ return security_ops->cred_alloc_blank(cred, gfp);
+}
+
void security_cred_free(struct cred *cred)
{
security_ops->cred_free(cred);
@@ -699,6 +704,11 @@
security_ops->cred_commit(new, old);
}
+void security_transfer_creds(struct cred *new, const struct cred *old)
+{
+ security_ops->cred_transfer(new, old);
+}
+
int security_kernel_act_as(struct cred *new, u32 secid)
{
return security_ops->kernel_act_as(new, secid);
@@ -709,6 +719,11 @@
return security_ops->kernel_create_files_as(new, inode);
}
+int security_kernel_module_request(void)
+{
+ return security_ops->kernel_module_request();
+}
+
int security_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags)
{
return security_ops->task_setuid(id0, id1, id2, flags);
@@ -959,6 +974,24 @@
}
EXPORT_SYMBOL(security_release_secctx);
+int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return security_ops->inode_notifysecctx(inode, ctx, ctxlen);
+}
+EXPORT_SYMBOL(security_inode_notifysecctx);
+
+int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return security_ops->inode_setsecctx(dentry, ctx, ctxlen);
+}
+EXPORT_SYMBOL(security_inode_setsecctx);
+
+int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ return security_ops->inode_getsecctx(inode, ctx, ctxlen);
+}
+EXPORT_SYMBOL(security_inode_getsecctx);
+
#ifdef CONFIG_SECURITY_NETWORK
int security_unix_stream_connect(struct socket *sock, struct socket *other,
@@ -1112,6 +1145,24 @@
security_ops->inet_conn_established(sk, skb);
}
+int security_tun_dev_create(void)
+{
+ return security_ops->tun_dev_create();
+}
+EXPORT_SYMBOL(security_tun_dev_create);
+
+void security_tun_dev_post_create(struct sock *sk)
+{
+ return security_ops->tun_dev_post_create(sk);
+}
+EXPORT_SYMBOL(security_tun_dev_post_create);
+
+int security_tun_dev_attach(struct sock *sk)
+{
+ return security_ops->tun_dev_attach(sk);
+}
+EXPORT_SYMBOL(security_tun_dev_attach);
+
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
@@ -1218,6 +1269,13 @@
return security_ops->key_getsecurity(key, _buffer);
}
+int security_key_session_to_parent(const struct cred *cred,
+ const struct cred *parent_cred,
+ struct key *key)
+{
+ return security_ops->key_session_to_parent(cred, parent_cred, key);
+}
+
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index b2ab608..e3d1901 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -137,7 +137,7 @@
* @tclass: target security class
* @av: access vector
*/
-void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av)
+static void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av)
{
const char **common_pts = NULL;
u32 common_base = 0;
@@ -492,23 +492,35 @@
return node;
}
-static inline void avc_print_ipv6_addr(struct audit_buffer *ab,
- struct in6_addr *addr, __be16 port,
- char *name1, char *name2)
+/**
+ * avc_audit_pre_callback - SELinux specific information
+ * will be called by generic audit code
+ * @ab: the audit buffer
+ * @a: audit_data
+ */
+static void avc_audit_pre_callback(struct audit_buffer *ab, void *a)
{
- if (!ipv6_addr_any(addr))
- audit_log_format(ab, " %s=%pI6", name1, addr);
- if (port)
- audit_log_format(ab, " %s=%d", name2, ntohs(port));
+ struct common_audit_data *ad = a;
+ audit_log_format(ab, "avc: %s ",
+ ad->selinux_audit_data.denied ? "denied" : "granted");
+ avc_dump_av(ab, ad->selinux_audit_data.tclass,
+ ad->selinux_audit_data.audited);
+ audit_log_format(ab, " for ");
}
-static inline void avc_print_ipv4_addr(struct audit_buffer *ab, __be32 addr,
- __be16 port, char *name1, char *name2)
+/**
+ * avc_audit_post_callback - SELinux specific information
+ * will be called by generic audit code
+ * @ab: the audit buffer
+ * @a: audit_data
+ */
+static void avc_audit_post_callback(struct audit_buffer *ab, void *a)
{
- if (addr)
- audit_log_format(ab, " %s=%pI4", name1, &addr);
- if (port)
- audit_log_format(ab, " %s=%d", name2, ntohs(port));
+ struct common_audit_data *ad = a;
+ audit_log_format(ab, " ");
+ avc_dump_query(ab, ad->selinux_audit_data.ssid,
+ ad->selinux_audit_data.tsid,
+ ad->selinux_audit_data.tclass);
}
/**
@@ -532,13 +544,10 @@
*/
void avc_audit(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
- struct av_decision *avd, int result, struct avc_audit_data *a)
+ struct av_decision *avd, int result, struct common_audit_data *a)
{
- struct task_struct *tsk = current;
- struct inode *inode = NULL;
+ struct common_audit_data stack_data;
u32 denied, audited;
- struct audit_buffer *ab;
-
denied = requested & ~avd->allowed;
if (denied) {
audited = denied;
@@ -551,144 +560,20 @@
if (!(audited & avd->auditallow))
return;
}
-
- ab = audit_log_start(current->audit_context, GFP_ATOMIC, AUDIT_AVC);
- if (!ab)
- return; /* audit_panic has been called */
- audit_log_format(ab, "avc: %s ", denied ? "denied" : "granted");
- avc_dump_av(ab, tclass, audited);
- audit_log_format(ab, " for ");
- if (a && a->tsk)
- tsk = a->tsk;
- if (tsk && tsk->pid) {
- audit_log_format(ab, " pid=%d comm=", tsk->pid);
- audit_log_untrustedstring(ab, tsk->comm);
+ if (!a) {
+ a = &stack_data;
+ memset(a, 0, sizeof(*a));
+ a->type = LSM_AUDIT_NO_AUDIT;
}
- if (a) {
- switch (a->type) {
- case AVC_AUDIT_DATA_IPC:
- audit_log_format(ab, " key=%d", a->u.ipc_id);
- break;
- case AVC_AUDIT_DATA_CAP:
- audit_log_format(ab, " capability=%d", a->u.cap);
- break;
- case AVC_AUDIT_DATA_FS:
- if (a->u.fs.path.dentry) {
- struct dentry *dentry = a->u.fs.path.dentry;
- if (a->u.fs.path.mnt) {
- audit_log_d_path(ab, "path=",
- &a->u.fs.path);
- } else {
- audit_log_format(ab, " name=");
- audit_log_untrustedstring(ab, dentry->d_name.name);
- }
- inode = dentry->d_inode;
- } else if (a->u.fs.inode) {
- struct dentry *dentry;
- inode = a->u.fs.inode;
- dentry = d_find_alias(inode);
- if (dentry) {
- audit_log_format(ab, " name=");
- audit_log_untrustedstring(ab, dentry->d_name.name);
- dput(dentry);
- }
- }
- if (inode)
- audit_log_format(ab, " dev=%s ino=%lu",
- inode->i_sb->s_id,
- inode->i_ino);
- break;
- case AVC_AUDIT_DATA_NET:
- if (a->u.net.sk) {
- struct sock *sk = a->u.net.sk;
- struct unix_sock *u;
- int len = 0;
- char *p = NULL;
-
- switch (sk->sk_family) {
- case AF_INET: {
- struct inet_sock *inet = inet_sk(sk);
-
- avc_print_ipv4_addr(ab, inet->rcv_saddr,
- inet->sport,
- "laddr", "lport");
- avc_print_ipv4_addr(ab, inet->daddr,
- inet->dport,
- "faddr", "fport");
- break;
- }
- case AF_INET6: {
- struct inet_sock *inet = inet_sk(sk);
- struct ipv6_pinfo *inet6 = inet6_sk(sk);
-
- avc_print_ipv6_addr(ab, &inet6->rcv_saddr,
- inet->sport,
- "laddr", "lport");
- avc_print_ipv6_addr(ab, &inet6->daddr,
- inet->dport,
- "faddr", "fport");
- break;
- }
- case AF_UNIX:
- u = unix_sk(sk);
- if (u->dentry) {
- struct path path = {
- .dentry = u->dentry,
- .mnt = u->mnt
- };
- audit_log_d_path(ab, "path=",
- &path);
- break;
- }
- if (!u->addr)
- break;
- len = u->addr->len-sizeof(short);
- p = &u->addr->name->sun_path[0];
- audit_log_format(ab, " path=");
- if (*p)
- audit_log_untrustedstring(ab, p);
- else
- audit_log_n_hex(ab, p, len);
- break;
- }
- }
-
- switch (a->u.net.family) {
- case AF_INET:
- avc_print_ipv4_addr(ab, a->u.net.v4info.saddr,
- a->u.net.sport,
- "saddr", "src");
- avc_print_ipv4_addr(ab, a->u.net.v4info.daddr,
- a->u.net.dport,
- "daddr", "dest");
- break;
- case AF_INET6:
- avc_print_ipv6_addr(ab, &a->u.net.v6info.saddr,
- a->u.net.sport,
- "saddr", "src");
- avc_print_ipv6_addr(ab, &a->u.net.v6info.daddr,
- a->u.net.dport,
- "daddr", "dest");
- break;
- }
- if (a->u.net.netif > 0) {
- struct net_device *dev;
-
- /* NOTE: we always use init's namespace */
- dev = dev_get_by_index(&init_net,
- a->u.net.netif);
- if (dev) {
- audit_log_format(ab, " netif=%s",
- dev->name);
- dev_put(dev);
- }
- }
- break;
- }
- }
- audit_log_format(ab, " ");
- avc_dump_query(ab, ssid, tsid, tclass);
- audit_log_end(ab);
+ a->selinux_audit_data.tclass = tclass;
+ a->selinux_audit_data.requested = requested;
+ a->selinux_audit_data.ssid = ssid;
+ a->selinux_audit_data.tsid = tsid;
+ a->selinux_audit_data.audited = audited;
+ a->selinux_audit_data.denied = denied;
+ a->lsm_pre_audit = avc_audit_pre_callback;
+ a->lsm_post_audit = avc_audit_post_callback;
+ common_lsm_audit(a);
}
/**
@@ -956,7 +841,7 @@
* another -errno upon other errors.
*/
int avc_has_perm(u32 ssid, u32 tsid, u16 tclass,
- u32 requested, struct avc_audit_data *auditdata)
+ u32 requested, struct common_audit_data *auditdata)
{
struct av_decision avd;
int rc;
@@ -970,3 +855,9 @@
{
return avc_cache.latest_notif;
}
+
+void avc_disable(void)
+{
+ if (avc_node_cachep)
+ kmem_cache_destroy(avc_node_cachep);
+}
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 8d8b69c..417f7c9 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -13,8 +13,8 @@
* Eric Paris <eparis@redhat.com>
* Copyright (C) 2004-2005 Trusted Computer Solutions, Inc.
* <dgoeddel@trustedcs.com>
- * Copyright (C) 2006, 2007 Hewlett-Packard Development Company, L.P.
- * Paul Moore <paul.moore@hp.com>
+ * Copyright (C) 2006, 2007, 2009 Hewlett-Packard Development Company, L.P.
+ * Paul Moore <paul.moore@hp.com>
* Copyright (C) 2007 Hitachi Software Engineering Co., Ltd.
* Yuichi Nakamura <ynakam@hitachisoft.jp>
*
@@ -448,6 +448,10 @@
sbsec->behavior > ARRAY_SIZE(labeling_behaviors))
sbsec->flags &= ~SE_SBLABELSUPP;
+ /* Special handling for sysfs. Is genfs but also has setxattr handler*/
+ if (strncmp(sb->s_type->name, "sysfs", sizeof("sysfs")) == 0)
+ sbsec->flags |= SE_SBLABELSUPP;
+
/* Initialize the root inode. */
rc = inode_doinit_with_dentry(root_inode, root);
@@ -1479,14 +1483,14 @@
const struct cred *cred,
int cap, int audit)
{
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct av_decision avd;
u16 sclass;
u32 sid = cred_sid(cred);
u32 av = CAP_TO_MASK(cap);
int rc;
- AVC_AUDIT_DATA_INIT(&ad, CAP);
+ COMMON_AUDIT_DATA_INIT(&ad, CAP);
ad.tsk = tsk;
ad.u.cap = cap;
@@ -1525,12 +1529,14 @@
static int inode_has_perm(const struct cred *cred,
struct inode *inode,
u32 perms,
- struct avc_audit_data *adp)
+ struct common_audit_data *adp)
{
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid;
+ validate_creds(cred);
+
if (unlikely(IS_PRIVATE(inode)))
return 0;
@@ -1539,7 +1545,7 @@
if (!adp) {
adp = &ad;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.inode = inode;
}
@@ -1555,9 +1561,9 @@
u32 av)
{
struct inode *inode = dentry->d_inode;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.mnt = mnt;
ad.u.fs.path.dentry = dentry;
return inode_has_perm(cred, inode, av, &ad);
@@ -1577,11 +1583,11 @@
{
struct file_security_struct *fsec = file->f_security;
struct inode *inode = file->f_path.dentry->d_inode;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = cred_sid(cred);
int rc;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path = file->f_path;
if (sid != fsec->sid) {
@@ -1612,7 +1618,7 @@
struct inode_security_struct *dsec;
struct superblock_security_struct *sbsec;
u32 sid, newsid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int rc;
dsec = dir->i_security;
@@ -1621,7 +1627,7 @@
sid = tsec->sid;
newsid = tsec->create_sid;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry;
rc = avc_has_perm(sid, dsec->sid, SECCLASS_DIR,
@@ -1665,7 +1671,7 @@
{
struct inode_security_struct *dsec, *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
u32 av;
int rc;
@@ -1673,7 +1679,7 @@
dsec = dir->i_security;
isec = dentry->d_inode->i_security;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry;
av = DIR__SEARCH;
@@ -1708,7 +1714,7 @@
struct dentry *new_dentry)
{
struct inode_security_struct *old_dsec, *new_dsec, *old_isec, *new_isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
u32 av;
int old_is_dir, new_is_dir;
@@ -1719,7 +1725,7 @@
old_is_dir = S_ISDIR(old_dentry->d_inode->i_mode);
new_dsec = new_dir->i_security;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = old_dentry;
rc = avc_has_perm(sid, old_dsec->sid, SECCLASS_DIR,
@@ -1761,7 +1767,7 @@
static int superblock_has_perm(const struct cred *cred,
struct super_block *sb,
u32 perms,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
struct superblock_security_struct *sbsec;
u32 sid = cred_sid(cred);
@@ -1855,12 +1861,12 @@
/* Hook functions begin here. */
-static int selinux_ptrace_may_access(struct task_struct *child,
+static int selinux_ptrace_access_check(struct task_struct *child,
unsigned int mode)
{
int rc;
- rc = cap_ptrace_may_access(child, mode);
+ rc = cap_ptrace_access_check(child, mode);
if (rc)
return rc;
@@ -2101,7 +2107,7 @@
const struct task_security_struct *old_tsec;
struct task_security_struct *new_tsec;
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct inode *inode = bprm->file->f_path.dentry->d_inode;
int rc;
@@ -2139,7 +2145,7 @@
return rc;
}
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path = bprm->file->f_path;
if (bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)
@@ -2232,7 +2238,7 @@
static inline void flush_unauthorized_files(const struct cred *cred,
struct files_struct *files)
{
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct file *file, *devnull = NULL;
struct tty_struct *tty;
struct fdtable *fdt;
@@ -2266,7 +2272,7 @@
/* Revalidate access to inherited open files. */
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
spin_lock(&files->file_lock);
for (;;) {
@@ -2515,7 +2521,7 @@
static int selinux_sb_kern_mount(struct super_block *sb, int flags, void *data)
{
const struct cred *cred = current_cred();
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int rc;
rc = superblock_doinit(sb, data);
@@ -2526,7 +2532,7 @@
if (flags & MS_KERNMOUNT)
return 0;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = sb->s_root;
return superblock_has_perm(cred, sb, FILESYSTEM__MOUNT, &ad);
}
@@ -2534,9 +2540,9 @@
static int selinux_sb_statfs(struct dentry *dentry)
{
const struct cred *cred = current_cred();
- struct avc_audit_data ad;
+ struct common_audit_data ad;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry->d_sb->s_root;
return superblock_has_perm(cred, dentry->d_sb, FILESYSTEM__GETATTR, &ad);
}
@@ -2711,12 +2717,18 @@
static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr)
{
const struct cred *cred = current_cred();
+ unsigned int ia_valid = iattr->ia_valid;
- if (iattr->ia_valid & ATTR_FORCE)
- return 0;
+ /* ATTR_FORCE is just used for ATTR_KILL_S[UG]ID. */
+ if (ia_valid & ATTR_FORCE) {
+ ia_valid &= ~(ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_MODE |
+ ATTR_FORCE);
+ if (!ia_valid)
+ return 0;
+ }
- if (iattr->ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID |
- ATTR_ATIME_SET | ATTR_MTIME_SET))
+ if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID |
+ ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET))
return dentry_has_perm(cred, NULL, dentry, FILE__SETATTR);
return dentry_has_perm(cred, NULL, dentry, FILE__WRITE);
@@ -2756,7 +2768,7 @@
struct inode *inode = dentry->d_inode;
struct inode_security_struct *isec = inode->i_security;
struct superblock_security_struct *sbsec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 newsid, sid = current_sid();
int rc = 0;
@@ -2770,7 +2782,7 @@
if (!is_owner_or_cap(inode))
return -EPERM;
- AVC_AUDIT_DATA_INIT(&ad, FS);
+ COMMON_AUDIT_DATA_INIT(&ad, FS);
ad.u.fs.path.dentry = dentry;
rc = avc_has_perm(sid, isec->sid, isec->sclass,
@@ -2915,6 +2927,7 @@
return rc;
isec->sid = newsid;
+ isec->initialized = 1;
return 0;
}
@@ -2939,11 +2952,6 @@
const struct cred *cred = current_cred();
struct inode *inode = file->f_path.dentry->d_inode;
- if (!mask) {
- /* No permission to check. Existence test. */
- return 0;
- }
-
/* file_mask_to_av won't add FILE__WRITE if MAY_APPEND is set */
if ((file->f_flags & O_APPEND) && (mask & MAY_WRITE))
mask |= MAY_APPEND;
@@ -2954,10 +2962,20 @@
static int selinux_file_permission(struct file *file, int mask)
{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ struct file_security_struct *fsec = file->f_security;
+ struct inode_security_struct *isec = inode->i_security;
+ u32 sid = current_sid();
+
if (!mask)
/* No permission to check. Existence test. */
return 0;
+ if (sid == fsec->sid && fsec->isid == isec->sid &&
+ fsec->pseqno == avc_policy_seqno())
+ /* No change since dentry_open check. */
+ return 0;
+
return selinux_revalidate_file_permission(file, mask);
}
@@ -3220,12 +3238,29 @@
}
/*
+ * allocate the SELinux part of blank credentials
+ */
+static int selinux_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ struct task_security_struct *tsec;
+
+ tsec = kzalloc(sizeof(struct task_security_struct), gfp);
+ if (!tsec)
+ return -ENOMEM;
+
+ cred->security = tsec;
+ return 0;
+}
+
+/*
* detach and free the LSM part of a set of credentials
*/
static void selinux_cred_free(struct cred *cred)
{
struct task_security_struct *tsec = cred->security;
- cred->security = NULL;
+
+ BUG_ON((unsigned long) cred->security < PAGE_SIZE);
+ cred->security = (void *) 0x7UL;
kfree(tsec);
}
@@ -3249,6 +3284,17 @@
}
/*
+ * transfer the SELinux data to a blank set of creds
+ */
+static void selinux_cred_transfer(struct cred *new, const struct cred *old)
+{
+ const struct task_security_struct *old_tsec = old->security;
+ struct task_security_struct *tsec = new->security;
+
+ *tsec = *old_tsec;
+}
+
+/*
* set the security data for a kernel service
* - all the creation contexts are set to unlabelled
*/
@@ -3292,6 +3338,11 @@
return 0;
}
+static int selinux_kernel_module_request(void)
+{
+ return task_has_system(current, SYSTEM__MODULE_REQUEST);
+}
+
static int selinux_task_setpgid(struct task_struct *p, pid_t pgid)
{
return current_has_perm(p, PROCESS__SETPGID);
@@ -3409,7 +3460,7 @@
/* Returns error only if unable to parse addresses */
static int selinux_parse_skb_ipv4(struct sk_buff *skb,
- struct avc_audit_data *ad, u8 *proto)
+ struct common_audit_data *ad, u8 *proto)
{
int offset, ihlen, ret = -EINVAL;
struct iphdr _iph, *ih;
@@ -3490,7 +3541,7 @@
/* Returns error only if unable to parse addresses */
static int selinux_parse_skb_ipv6(struct sk_buff *skb,
- struct avc_audit_data *ad, u8 *proto)
+ struct common_audit_data *ad, u8 *proto)
{
u8 nexthdr;
int ret = -EINVAL, offset;
@@ -3561,7 +3612,7 @@
#endif /* IPV6 */
-static int selinux_parse_skb(struct sk_buff *skb, struct avc_audit_data *ad,
+static int selinux_parse_skb(struct sk_buff *skb, struct common_audit_data *ad,
char **_addrp, int src, u8 *proto)
{
char *addrp;
@@ -3643,7 +3694,7 @@
u32 perms)
{
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid;
int err = 0;
@@ -3653,7 +3704,7 @@
goto out;
sid = task_sid(task);
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sk = sock->sk;
err = avc_has_perm(sid, isec->sid, isec->sclass, perms, &ad);
@@ -3740,7 +3791,7 @@
if (family == PF_INET || family == PF_INET6) {
char *addrp;
struct inode_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct sockaddr_in *addr4 = NULL;
struct sockaddr_in6 *addr6 = NULL;
unsigned short snum;
@@ -3769,7 +3820,7 @@
snum, &sid);
if (err)
goto out;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sport = htons(snum);
ad.u.net.family = family;
err = avc_has_perm(isec->sid, sid,
@@ -3802,7 +3853,7 @@
if (err)
goto out;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sport = htons(snum);
ad.u.net.family = family;
@@ -3836,7 +3887,7 @@
isec = SOCK_INODE(sock)->i_security;
if (isec->sclass == SECCLASS_TCP_SOCKET ||
isec->sclass == SECCLASS_DCCP_SOCKET) {
- struct avc_audit_data ad;
+ struct common_audit_data ad;
struct sockaddr_in *addr4 = NULL;
struct sockaddr_in6 *addr6 = NULL;
unsigned short snum;
@@ -3861,7 +3912,7 @@
perm = (isec->sclass == SECCLASS_TCP_SOCKET) ?
TCP_SOCKET__NAME_CONNECT : DCCP_SOCKET__NAME_CONNECT;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.dport = htons(snum);
ad.u.net.family = sk->sk_family;
err = avc_has_perm(isec->sid, sid, isec->sclass, perm, &ad);
@@ -3951,13 +4002,13 @@
struct sk_security_struct *ssec;
struct inode_security_struct *isec;
struct inode_security_struct *other_isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int err;
isec = SOCK_INODE(sock)->i_security;
other_isec = SOCK_INODE(other)->i_security;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sk = other->sk;
err = avc_has_perm(isec->sid, other_isec->sid,
@@ -3983,13 +4034,13 @@
{
struct inode_security_struct *isec;
struct inode_security_struct *other_isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
int err;
isec = SOCK_INODE(sock)->i_security;
other_isec = SOCK_INODE(other)->i_security;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.sk = other->sk;
err = avc_has_perm(isec->sid, other_isec->sid,
@@ -4002,7 +4053,7 @@
static int selinux_inet_sys_rcv_skb(int ifindex, char *addrp, u16 family,
u32 peer_sid,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
int err;
u32 if_sid;
@@ -4030,10 +4081,10 @@
struct sk_security_struct *sksec = sk->sk_security;
u32 peer_sid;
u32 sk_sid = sksec->sid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = skb->iif;
ad.u.net.family = family;
err = selinux_parse_skb(skb, &ad, &addrp, 1, NULL);
@@ -4071,7 +4122,7 @@
struct sk_security_struct *sksec = sk->sk_security;
u16 family = sk->sk_family;
u32 sk_sid = sksec->sid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
u8 secmark_active;
u8 peerlbl_active;
@@ -4095,7 +4146,7 @@
if (!secmark_active && !peerlbl_active)
return 0;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = skb->iif;
ad.u.net.family = family;
err = selinux_parse_skb(skb, &ad, &addrp, 1, NULL);
@@ -4309,6 +4360,59 @@
fl->secid = req->secid;
}
+static int selinux_tun_dev_create(void)
+{
+ u32 sid = current_sid();
+
+ /* we aren't taking into account the "sockcreate" SID since the socket
+ * that is being created here is not a socket in the traditional sense,
+ * instead it is a private sock, accessible only to the kernel, and
+ * representing a wide range of network traffic spanning multiple
+ * connections unlike traditional sockets - check the TUN driver to
+ * get a better understanding of why this socket is special */
+
+ return avc_has_perm(sid, sid, SECCLASS_TUN_SOCKET, TUN_SOCKET__CREATE,
+ NULL);
+}
+
+static void selinux_tun_dev_post_create(struct sock *sk)
+{
+ struct sk_security_struct *sksec = sk->sk_security;
+
+ /* we don't currently perform any NetLabel based labeling here and it
+ * isn't clear that we would want to do so anyway; while we could apply
+ * labeling without the support of the TUN user the resulting labeled
+ * traffic from the other end of the connection would almost certainly
+ * cause confusion to the TUN user that had no idea network labeling
+ * protocols were being used */
+
+ /* see the comments in selinux_tun_dev_create() about why we don't use
+ * the sockcreate SID here */
+
+ sksec->sid = current_sid();
+ sksec->sclass = SECCLASS_TUN_SOCKET;
+}
+
+static int selinux_tun_dev_attach(struct sock *sk)
+{
+ struct sk_security_struct *sksec = sk->sk_security;
+ u32 sid = current_sid();
+ int err;
+
+ err = avc_has_perm(sid, sksec->sid, SECCLASS_TUN_SOCKET,
+ TUN_SOCKET__RELABELFROM, NULL);
+ if (err)
+ return err;
+ err = avc_has_perm(sid, sid, SECCLASS_TUN_SOCKET,
+ TUN_SOCKET__RELABELTO, NULL);
+ if (err)
+ return err;
+
+ sksec->sid = sid;
+
+ return 0;
+}
+
static int selinux_nlmsg_perm(struct sock *sk, struct sk_buff *skb)
{
int err = 0;
@@ -4353,7 +4457,7 @@
int err;
char *addrp;
u32 peer_sid;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u8 secmark_active;
u8 netlbl_active;
u8 peerlbl_active;
@@ -4370,7 +4474,7 @@
if (selinux_skb_peerlbl_sid(skb, family, &peer_sid) != 0)
return NF_DROP;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = ifindex;
ad.u.net.family = family;
if (selinux_parse_skb(skb, &ad, &addrp, 1, NULL) != 0)
@@ -4458,7 +4562,7 @@
{
struct sock *sk = skb->sk;
struct sk_security_struct *sksec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
u8 proto;
@@ -4466,7 +4570,7 @@
return NF_ACCEPT;
sksec = sk->sk_security;
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = ifindex;
ad.u.net.family = family;
if (selinux_parse_skb(skb, &ad, &addrp, 0, &proto))
@@ -4490,7 +4594,7 @@
u32 secmark_perm;
u32 peer_sid;
struct sock *sk;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
char *addrp;
u8 secmark_active;
u8 peerlbl_active;
@@ -4549,7 +4653,7 @@
secmark_perm = PACKET__SEND;
}
- AVC_AUDIT_DATA_INIT(&ad, NET);
+ COMMON_AUDIT_DATA_INIT(&ad, NET);
ad.u.net.netif = ifindex;
ad.u.net.family = family;
if (selinux_parse_skb(skb, &ad, &addrp, 0, NULL))
@@ -4619,13 +4723,13 @@
static int selinux_netlink_recv(struct sk_buff *skb, int capability)
{
int err;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
err = cap_netlink_recv(skb, capability);
if (err)
return err;
- AVC_AUDIT_DATA_INIT(&ad, CAP);
+ COMMON_AUDIT_DATA_INIT(&ad, CAP);
ad.u.cap = capability;
return avc_has_perm(NETLINK_CB(skb).sid, NETLINK_CB(skb).sid,
@@ -4684,12 +4788,12 @@
u32 perms)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = ipc_perms->security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = ipc_perms->key;
return avc_has_perm(sid, isec->sid, isec->sclass, perms, &ad);
@@ -4709,7 +4813,7 @@
static int selinux_msg_queue_alloc_security(struct msg_queue *msq)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
@@ -4719,7 +4823,7 @@
isec = msq->q_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
rc = avc_has_perm(sid, isec->sid, SECCLASS_MSGQ,
@@ -4739,12 +4843,12 @@
static int selinux_msg_queue_associate(struct msg_queue *msq, int msqflg)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = msq->q_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
return avc_has_perm(sid, isec->sid, SECCLASS_MSGQ,
@@ -4783,7 +4887,7 @@
{
struct ipc_security_struct *isec;
struct msg_security_struct *msec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
@@ -4804,7 +4908,7 @@
return rc;
}
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
/* Can this process write to the queue? */
@@ -4828,14 +4932,14 @@
{
struct ipc_security_struct *isec;
struct msg_security_struct *msec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = task_sid(target);
int rc;
isec = msq->q_perm.security;
msec = msg->security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = msq->q_perm.key;
rc = avc_has_perm(sid, isec->sid,
@@ -4850,7 +4954,7 @@
static int selinux_shm_alloc_security(struct shmid_kernel *shp)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
@@ -4860,7 +4964,7 @@
isec = shp->shm_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = shp->shm_perm.key;
rc = avc_has_perm(sid, isec->sid, SECCLASS_SHM,
@@ -4880,12 +4984,12 @@
static int selinux_shm_associate(struct shmid_kernel *shp, int shmflg)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = shp->shm_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = shp->shm_perm.key;
return avc_has_perm(sid, isec->sid, SECCLASS_SHM,
@@ -4942,7 +5046,7 @@
static int selinux_sem_alloc_security(struct sem_array *sma)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
int rc;
@@ -4952,7 +5056,7 @@
isec = sma->sem_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = sma->sem_perm.key;
rc = avc_has_perm(sid, isec->sid, SECCLASS_SEM,
@@ -4972,12 +5076,12 @@
static int selinux_sem_associate(struct sem_array *sma, int semflg)
{
struct ipc_security_struct *isec;
- struct avc_audit_data ad;
+ struct common_audit_data ad;
u32 sid = current_sid();
isec = sma->sem_perm.security;
- AVC_AUDIT_DATA_INIT(&ad, IPC);
+ COMMON_AUDIT_DATA_INIT(&ad, IPC);
ad.u.ipc_id = sma->sem_perm.key;
return avc_has_perm(sid, isec->sid, SECCLASS_SEM,
@@ -5195,7 +5299,7 @@
/* Only allow single threaded processes to change context */
error = -EPERM;
- if (!is_single_threaded(p)) {
+ if (!current_is_single_threaded()) {
error = security_bounded_transition(tsec->sid, sid);
if (error)
goto abort_change;
@@ -5252,6 +5356,32 @@
kfree(secdata);
}
+/*
+ * called with inode->i_mutex locked
+ */
+static int selinux_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
+}
+
+/*
+ * called with inode->i_mutex locked
+ */
+static int selinux_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return __vfs_setxattr_noperm(dentry, XATTR_NAME_SELINUX, ctx, ctxlen, 0);
+}
+
+static int selinux_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ int len = 0;
+ len = selinux_inode_getsecurity(inode, XATTR_SELINUX_SUFFIX,
+ ctx, true);
+ if (len < 0)
+ return len;
+ *ctxlen = len;
+ return 0;
+}
#ifdef CONFIG_KEYS
static int selinux_key_alloc(struct key *k, const struct cred *cred,
@@ -5323,7 +5453,7 @@
static struct security_operations selinux_ops = {
.name = "selinux",
- .ptrace_may_access = selinux_ptrace_may_access,
+ .ptrace_access_check = selinux_ptrace_access_check,
.ptrace_traceme = selinux_ptrace_traceme,
.capget = selinux_capget,
.capset = selinux_capset,
@@ -5396,10 +5526,13 @@
.dentry_open = selinux_dentry_open,
.task_create = selinux_task_create,
+ .cred_alloc_blank = selinux_cred_alloc_blank,
.cred_free = selinux_cred_free,
.cred_prepare = selinux_cred_prepare,
+ .cred_transfer = selinux_cred_transfer,
.kernel_act_as = selinux_kernel_act_as,
.kernel_create_files_as = selinux_kernel_create_files_as,
+ .kernel_module_request = selinux_kernel_module_request,
.task_setpgid = selinux_task_setpgid,
.task_getpgid = selinux_task_getpgid,
.task_getsid = selinux_task_getsid,
@@ -5448,6 +5581,9 @@
.secid_to_secctx = selinux_secid_to_secctx,
.secctx_to_secid = selinux_secctx_to_secid,
.release_secctx = selinux_release_secctx,
+ .inode_notifysecctx = selinux_inode_notifysecctx,
+ .inode_setsecctx = selinux_inode_setsecctx,
+ .inode_getsecctx = selinux_inode_getsecctx,
.unix_stream_connect = selinux_socket_unix_stream_connect,
.unix_may_send = selinux_socket_unix_may_send,
@@ -5477,6 +5613,9 @@
.inet_csk_clone = selinux_inet_csk_clone,
.inet_conn_established = selinux_inet_conn_established,
.req_classify_flow = selinux_req_classify_flow,
+ .tun_dev_create = selinux_tun_dev_create,
+ .tun_dev_post_create = selinux_tun_dev_post_create,
+ .tun_dev_attach = selinux_tun_dev_attach,
#ifdef CONFIG_SECURITY_NETWORK_XFRM
.xfrm_policy_alloc_security = selinux_xfrm_policy_alloc,
@@ -5691,6 +5830,9 @@
selinux_disabled = 1;
selinux_enabled = 0;
+ /* Try to destroy the avc node cache */
+ avc_disable();
+
/* Reset security_ops to the secondary module, dummy or capability. */
security_ops = secondary_ops;
diff --git a/security/selinux/include/av_inherit.h b/security/selinux/include/av_inherit.h
index 8377a4b..abedcd7 100644
--- a/security/selinux/include/av_inherit.h
+++ b/security/selinux/include/av_inherit.h
@@ -15,6 +15,7 @@
S_(SECCLASS_KEY_SOCKET, socket, 0x00400000UL)
S_(SECCLASS_UNIX_STREAM_SOCKET, socket, 0x00400000UL)
S_(SECCLASS_UNIX_DGRAM_SOCKET, socket, 0x00400000UL)
+ S_(SECCLASS_TUN_SOCKET, socket, 0x00400000UL)
S_(SECCLASS_IPC, ipc, 0x00000200UL)
S_(SECCLASS_SEM, ipc, 0x00000200UL)
S_(SECCLASS_MSGQ, ipc, 0x00000200UL)
diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h
index 31df1d7..2b683ad 100644
--- a/security/selinux/include/av_perm_to_string.h
+++ b/security/selinux/include/av_perm_to_string.h
@@ -107,6 +107,7 @@
S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_READ, "syslog_read")
S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_MOD, "syslog_mod")
S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_CONSOLE, "syslog_console")
+ S_(SECCLASS_SYSTEM, SYSTEM__MODULE_REQUEST, "module_request")
S_(SECCLASS_CAPABILITY, CAPABILITY__CHOWN, "chown")
S_(SECCLASS_CAPABILITY, CAPABILITY__DAC_OVERRIDE, "dac_override")
S_(SECCLASS_CAPABILITY, CAPABILITY__DAC_READ_SEARCH, "dac_read_search")
diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h
index d645192..0546d61 100644
--- a/security/selinux/include/av_permissions.h
+++ b/security/selinux/include/av_permissions.h
@@ -423,6 +423,28 @@
#define UNIX_DGRAM_SOCKET__RECV_MSG 0x00080000UL
#define UNIX_DGRAM_SOCKET__SEND_MSG 0x00100000UL
#define UNIX_DGRAM_SOCKET__NAME_BIND 0x00200000UL
+#define TUN_SOCKET__IOCTL 0x00000001UL
+#define TUN_SOCKET__READ 0x00000002UL
+#define TUN_SOCKET__WRITE 0x00000004UL
+#define TUN_SOCKET__CREATE 0x00000008UL
+#define TUN_SOCKET__GETATTR 0x00000010UL
+#define TUN_SOCKET__SETATTR 0x00000020UL
+#define TUN_SOCKET__LOCK 0x00000040UL
+#define TUN_SOCKET__RELABELFROM 0x00000080UL
+#define TUN_SOCKET__RELABELTO 0x00000100UL
+#define TUN_SOCKET__APPEND 0x00000200UL
+#define TUN_SOCKET__BIND 0x00000400UL
+#define TUN_SOCKET__CONNECT 0x00000800UL
+#define TUN_SOCKET__LISTEN 0x00001000UL
+#define TUN_SOCKET__ACCEPT 0x00002000UL
+#define TUN_SOCKET__GETOPT 0x00004000UL
+#define TUN_SOCKET__SETOPT 0x00008000UL
+#define TUN_SOCKET__SHUTDOWN 0x00010000UL
+#define TUN_SOCKET__RECVFROM 0x00020000UL
+#define TUN_SOCKET__SENDTO 0x00040000UL
+#define TUN_SOCKET__RECV_MSG 0x00080000UL
+#define TUN_SOCKET__SEND_MSG 0x00100000UL
+#define TUN_SOCKET__NAME_BIND 0x00200000UL
#define PROCESS__FORK 0x00000001UL
#define PROCESS__TRANSITION 0x00000002UL
#define PROCESS__SIGCHLD 0x00000004UL
@@ -508,6 +530,7 @@
#define SYSTEM__SYSLOG_READ 0x00000002UL
#define SYSTEM__SYSLOG_MOD 0x00000004UL
#define SYSTEM__SYSLOG_CONSOLE 0x00000008UL
+#define SYSTEM__MODULE_REQUEST 0x00000010UL
#define CAPABILITY__CHOWN 0x00000001UL
#define CAPABILITY__DAC_OVERRIDE 0x00000002UL
#define CAPABILITY__DAC_READ_SEARCH 0x00000004UL
diff --git a/security/selinux/include/avc.h b/security/selinux/include/avc.h
index d12ff1a..e94e82f 100644
--- a/security/selinux/include/avc.h
+++ b/security/selinux/include/avc.h
@@ -13,6 +13,7 @@
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/audit.h>
+#include <linux/lsm_audit.h>
#include <linux/in6.h>
#include <linux/path.h>
#include <asm/system.h>
@@ -36,48 +37,6 @@
struct sock;
struct sk_buff;
-/* Auxiliary data to use in generating the audit record. */
-struct avc_audit_data {
- char type;
-#define AVC_AUDIT_DATA_FS 1
-#define AVC_AUDIT_DATA_NET 2
-#define AVC_AUDIT_DATA_CAP 3
-#define AVC_AUDIT_DATA_IPC 4
- struct task_struct *tsk;
- union {
- struct {
- struct path path;
- struct inode *inode;
- } fs;
- struct {
- int netif;
- struct sock *sk;
- u16 family;
- __be16 dport;
- __be16 sport;
- union {
- struct {
- __be32 daddr;
- __be32 saddr;
- } v4;
- struct {
- struct in6_addr daddr;
- struct in6_addr saddr;
- } v6;
- } fam;
- } net;
- int cap;
- int ipc_id;
- } u;
-};
-
-#define v4info fam.v4
-#define v6info fam.v6
-
-/* Initialize an AVC audit data structure. */
-#define AVC_AUDIT_DATA_INIT(_d,_t) \
- { memset((_d), 0, sizeof(struct avc_audit_data)); (_d)->type = AVC_AUDIT_DATA_##_t; }
-
/*
* AVC statistics
*/
@@ -98,7 +57,9 @@
void avc_audit(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
- struct av_decision *avd, int result, struct avc_audit_data *auditdata);
+ struct av_decision *avd,
+ int result,
+ struct common_audit_data *a);
#define AVC_STRICT 1 /* Ignore permissive mode. */
int avc_has_perm_noaudit(u32 ssid, u32 tsid,
@@ -108,7 +69,7 @@
int avc_has_perm(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
- struct avc_audit_data *auditdata);
+ struct common_audit_data *auditdata);
u32 avc_policy_seqno(void);
@@ -127,13 +88,13 @@
u32 events, u32 ssid, u32 tsid,
u16 tclass, u32 perms);
-/* Shows permission in human readable form */
-void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av);
-
/* Exported to selinuxfs */
int avc_get_hash_stats(char *page);
extern unsigned int avc_cache_threshold;
+/* Attempt to free avc node cache */
+void avc_disable(void);
+
#ifdef CONFIG_SECURITY_SELINUX_AVC_STATS
DECLARE_PER_CPU(struct avc_cache_stats, avc_cache_stats);
#endif
diff --git a/security/selinux/include/class_to_string.h b/security/selinux/include/class_to_string.h
index 21ec786..7ab9299 100644
--- a/security/selinux/include/class_to_string.h
+++ b/security/selinux/include/class_to_string.h
@@ -77,3 +77,4 @@
S_(NULL)
S_(NULL)
S_("kernel_service")
+ S_("tun_socket")
diff --git a/security/selinux/include/flask.h b/security/selinux/include/flask.h
index 882f27d..f248500 100644
--- a/security/selinux/include/flask.h
+++ b/security/selinux/include/flask.h
@@ -53,6 +53,7 @@
#define SECCLASS_PEER 68
#define SECCLASS_CAPABILITY2 69
#define SECCLASS_KERNEL_SERVICE 74
+#define SECCLASS_TUN_SOCKET 75
/*
* Security identifier indices for initial entities
diff --git a/security/selinux/include/netlabel.h b/security/selinux/include/netlabel.h
index b4b5b9b..8d73842 100644
--- a/security/selinux/include/netlabel.h
+++ b/security/selinux/include/netlabel.h
@@ -59,7 +59,7 @@
int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
struct sk_buff *skb,
u16 family,
- struct avc_audit_data *ad);
+ struct common_audit_data *ad);
int selinux_netlbl_socket_setsockopt(struct socket *sock,
int level,
int optname);
@@ -129,7 +129,7 @@
static inline int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
struct sk_buff *skb,
u16 family,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
return 0;
}
diff --git a/security/selinux/include/xfrm.h b/security/selinux/include/xfrm.h
index 289e24b..13128f9 100644
--- a/security/selinux/include/xfrm.h
+++ b/security/selinux/include/xfrm.h
@@ -41,9 +41,9 @@
}
int selinux_xfrm_sock_rcv_skb(u32 sid, struct sk_buff *skb,
- struct avc_audit_data *ad);
+ struct common_audit_data *ad);
int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad, u8 proto);
+ struct common_audit_data *ad, u8 proto);
int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall);
static inline void selinux_xfrm_notify_policyload(void)
@@ -57,13 +57,13 @@
}
static inline int selinux_xfrm_sock_rcv_skb(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
return 0;
}
static inline int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad, u8 proto)
+ struct common_audit_data *ad, u8 proto)
{
return 0;
}
diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
index 2e98441..e688237 100644
--- a/security/selinux/netlabel.c
+++ b/security/selinux/netlabel.c
@@ -342,7 +342,7 @@
int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
struct sk_buff *skb,
u16 family,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
int rc;
u32 nlbl_sid;
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 500e6f7..ff17820 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -22,6 +22,11 @@
*
* Added validation of kernel classes and permissions
*
+ * Updated: KaiGai Kohei <kaigai@ak.jp.nec.com>
+ *
+ * Added support for bounds domain and audit messaged on masked permissions
+ *
+ * Copyright (C) 2008, 2009 NEC Corporation
* Copyright (C) 2006, 2007 Hewlett-Packard Development Company, L.P.
* Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
* Copyright (C) 2003 - 2004, 2006 Tresys Technology, LLC
@@ -279,6 +284,95 @@
}
/*
+ * security_dump_masked_av - dumps masked permissions during
+ * security_compute_av due to RBAC, MLS/Constraint and Type bounds.
+ */
+static int dump_masked_av_helper(void *k, void *d, void *args)
+{
+ struct perm_datum *pdatum = d;
+ char **permission_names = args;
+
+ BUG_ON(pdatum->value < 1 || pdatum->value > 32);
+
+ permission_names[pdatum->value - 1] = (char *)k;
+
+ return 0;
+}
+
+static void security_dump_masked_av(struct context *scontext,
+ struct context *tcontext,
+ u16 tclass,
+ u32 permissions,
+ const char *reason)
+{
+ struct common_datum *common_dat;
+ struct class_datum *tclass_dat;
+ struct audit_buffer *ab;
+ char *tclass_name;
+ char *scontext_name = NULL;
+ char *tcontext_name = NULL;
+ char *permission_names[32];
+ int index, length;
+ bool need_comma = false;
+
+ if (!permissions)
+ return;
+
+ tclass_name = policydb.p_class_val_to_name[tclass - 1];
+ tclass_dat = policydb.class_val_to_struct[tclass - 1];
+ common_dat = tclass_dat->comdatum;
+
+ /* init permission_names */
+ if (common_dat &&
+ hashtab_map(common_dat->permissions.table,
+ dump_masked_av_helper, permission_names) < 0)
+ goto out;
+
+ if (hashtab_map(tclass_dat->permissions.table,
+ dump_masked_av_helper, permission_names) < 0)
+ goto out;
+
+ /* get scontext/tcontext in text form */
+ if (context_struct_to_string(scontext,
+ &scontext_name, &length) < 0)
+ goto out;
+
+ if (context_struct_to_string(tcontext,
+ &tcontext_name, &length) < 0)
+ goto out;
+
+ /* audit a message */
+ ab = audit_log_start(current->audit_context,
+ GFP_ATOMIC, AUDIT_SELINUX_ERR);
+ if (!ab)
+ goto out;
+
+ audit_log_format(ab, "op=security_compute_av reason=%s "
+ "scontext=%s tcontext=%s tclass=%s perms=",
+ reason, scontext_name, tcontext_name, tclass_name);
+
+ for (index = 0; index < 32; index++) {
+ u32 mask = (1 << index);
+
+ if ((mask & permissions) == 0)
+ continue;
+
+ audit_log_format(ab, "%s%s",
+ need_comma ? "," : "",
+ permission_names[index]
+ ? permission_names[index] : "????");
+ need_comma = true;
+ }
+ audit_log_end(ab);
+out:
+ /* release scontext/tcontext */
+ kfree(tcontext_name);
+ kfree(scontext_name);
+
+ return;
+}
+
+/*
* security_boundary_permission - drops violated permissions
* on boundary constraint.
*/
@@ -347,28 +441,12 @@
}
if (masked) {
- struct audit_buffer *ab;
- char *stype_name
- = policydb.p_type_val_to_name[source->value - 1];
- char *ttype_name
- = policydb.p_type_val_to_name[target->value - 1];
- char *tclass_name
- = policydb.p_class_val_to_name[tclass - 1];
-
/* mask violated permissions */
avd->allowed &= ~masked;
- /* notice to userspace via audit message */
- ab = audit_log_start(current->audit_context,
- GFP_ATOMIC, AUDIT_SELINUX_ERR);
- if (!ab)
- return;
-
- audit_log_format(ab, "av boundary violation: "
- "source=%s target=%s tclass=%s",
- stype_name, ttype_name, tclass_name);
- avc_dump_av(ab, tclass, masked);
- audit_log_end(ab);
+ /* audit masked permissions */
+ security_dump_masked_av(scontext, tcontext,
+ tclass, masked, "bounds");
}
}
@@ -480,7 +558,7 @@
if ((constraint->permissions & (avd->allowed)) &&
!constraint_expr_eval(scontext, tcontext, NULL,
constraint->expr)) {
- avd->allowed = (avd->allowed) & ~(constraint->permissions);
+ avd->allowed &= ~(constraint->permissions);
}
constraint = constraint->next;
}
@@ -499,8 +577,8 @@
break;
}
if (!ra)
- avd->allowed = (avd->allowed) & ~(PROCESS__TRANSITION |
- PROCESS__DYNTRANSITION);
+ avd->allowed &= ~(PROCESS__TRANSITION |
+ PROCESS__DYNTRANSITION);
}
/*
@@ -687,6 +765,26 @@
}
index = type->bounds;
}
+
+ if (rc) {
+ char *old_name = NULL;
+ char *new_name = NULL;
+ int length;
+
+ if (!context_struct_to_string(old_context,
+ &old_name, &length) &&
+ !context_struct_to_string(new_context,
+ &new_name, &length)) {
+ audit_log(current->audit_context,
+ GFP_ATOMIC, AUDIT_SELINUX_ERR,
+ "op=security_bounded_transition "
+ "result=denied "
+ "oldcontext=%s newcontext=%s",
+ old_name, new_name);
+ }
+ kfree(new_name);
+ kfree(old_name);
+ }
out:
read_unlock(&policy_rwlock);
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 72b1845..f3cb9ed 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -401,7 +401,7 @@
* gone thru the IPSec process.
*/
int selinux_xfrm_sock_rcv_skb(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad)
+ struct common_audit_data *ad)
{
int i, rc = 0;
struct sec_path *sp;
@@ -442,7 +442,7 @@
* checked in the selinux_xfrm_state_pol_flow_match hook above.
*/
int selinux_xfrm_postroute_last(u32 isec_sid, struct sk_buff *skb,
- struct avc_audit_data *ad, u8 proto)
+ struct common_audit_data *ad, u8 proto)
{
struct dst_entry *dst;
int rc = 0;
diff --git a/security/smack/smack.h b/security/smack/smack.h
index 243bec1..c6e9aca 100644
--- a/security/smack/smack.h
+++ b/security/smack/smack.h
@@ -275,7 +275,7 @@
{
memset(a, 0, sizeof(*a));
a->a.type = type;
- a->a.function = func;
+ a->a.smack_audit_data.function = func;
}
static inline void smk_ad_setfield_u_tsk(struct smk_audit_info *a,
diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c
index 513dc1a..0f9ac81 100644
--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -240,8 +240,9 @@
static void smack_log_callback(struct audit_buffer *ab, void *a)
{
struct common_audit_data *ad = a;
- struct smack_audit_data *sad = &ad->lsm_priv.smack_audit_data;
- audit_log_format(ab, "lsm=SMACK fn=%s action=%s", ad->function,
+ struct smack_audit_data *sad = &ad->smack_audit_data;
+ audit_log_format(ab, "lsm=SMACK fn=%s action=%s",
+ ad->smack_audit_data.function,
sad->result ? "denied" : "granted");
audit_log_format(ab, " subject=");
audit_log_untrustedstring(ab, sad->subject);
@@ -274,11 +275,11 @@
if (result == 0 && (log_policy & SMACK_AUDIT_ACCEPT) == 0)
return;
- if (a->function == NULL)
- a->function = "unknown";
+ if (a->smack_audit_data.function == NULL)
+ a->smack_audit_data.function = "unknown";
/* end preparing the audit data */
- sad = &a->lsm_priv.smack_audit_data;
+ sad = &a->smack_audit_data;
smack_str_from_perm(request_buffer, request);
sad->subject = subject_label;
sad->object = object_label;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0023182..acae7ef4 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -91,7 +91,7 @@
*/
/**
- * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
+ * smack_ptrace_access_check - Smack approval on PTRACE_ATTACH
* @ctp: child task pointer
* @mode: ptrace attachment mode
*
@@ -99,13 +99,13 @@
*
* Do the capability checks, and require read and write.
*/
-static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
+static int smack_ptrace_access_check(struct task_struct *ctp, unsigned int mode)
{
int rc;
struct smk_audit_info ad;
char *sp, *tsp;
- rc = cap_ptrace_may_access(ctp, mode);
+ rc = cap_ptrace_access_check(ctp, mode);
if (rc != 0)
return rc;
@@ -1080,6 +1080,22 @@
*/
/**
+ * smack_cred_alloc_blank - "allocate" blank task-level security credentials
+ * @new: the new credentials
+ * @gfp: the atomicity of any memory allocations
+ *
+ * Prepare a blank set of credentials for modification. This must allocate all
+ * the memory the LSM module might require such that cred_transfer() can
+ * complete without error.
+ */
+static int smack_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+ cred->security = NULL;
+ return 0;
+}
+
+
+/**
* smack_cred_free - "free" task-level security credentials
* @cred: the credentials in question
*
@@ -1117,6 +1133,18 @@
}
/**
+ * smack_cred_transfer - Transfer the old credentials to the new credentials
+ * @new: the new credentials
+ * @old: the original credentials
+ *
+ * Fill in a set of blank credentials from another set of credentials.
+ */
+static void smack_cred_transfer(struct cred *new, const struct cred *old)
+{
+ new->security = old->security;
+}
+
+/**
* smack_kernel_act_as - Set the subjective context in a set of credentials
* @new: points to the set of credentials to be modified.
* @secid: specifies the security ID to be set
@@ -1638,6 +1666,7 @@
if (strcmp(name, XATTR_SMACK_SUFFIX) == 0) {
nsp->smk_inode = sp;
+ nsp->smk_flags |= SMK_INODE_INSTANT;
return 0;
}
/*
@@ -2464,7 +2493,7 @@
/*
* Perfectly reasonable for this to be NULL
*/
- if (sip == NULL || sip->sin_family != PF_INET)
+ if (sip == NULL || sip->sin_family != AF_INET)
return 0;
return smack_netlabel_send(sock->sk, sip);
@@ -3029,10 +3058,31 @@
{
}
+static int smack_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+ return smack_inode_setsecurity(inode, XATTR_SMACK_SUFFIX, ctx, ctxlen, 0);
+}
+
+static int smack_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+ return __vfs_setxattr_noperm(dentry, XATTR_NAME_SMACK, ctx, ctxlen, 0);
+}
+
+static int smack_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+ int len = 0;
+ len = smack_inode_getsecurity(inode, XATTR_SMACK_SUFFIX, ctx, true);
+
+ if (len < 0)
+ return len;
+ *ctxlen = len;
+ return 0;
+}
+
struct security_operations smack_ops = {
.name = "smack",
- .ptrace_may_access = smack_ptrace_may_access,
+ .ptrace_access_check = smack_ptrace_access_check,
.ptrace_traceme = smack_ptrace_traceme,
.syslog = smack_syslog,
@@ -3073,9 +3123,11 @@
.file_send_sigiotask = smack_file_send_sigiotask,
.file_receive = smack_file_receive,
+ .cred_alloc_blank = smack_cred_alloc_blank,
.cred_free = smack_cred_free,
.cred_prepare = smack_cred_prepare,
.cred_commit = smack_cred_commit,
+ .cred_transfer = smack_cred_transfer,
.kernel_act_as = smack_kernel_act_as,
.kernel_create_files_as = smack_kernel_create_files_as,
.task_setpgid = smack_task_setpgid,
@@ -3155,6 +3207,9 @@
.secid_to_secctx = smack_secid_to_secctx,
.secctx_to_secid = smack_secctx_to_secid,
.release_secctx = smack_release_secctx,
+ .inode_notifysecctx = smack_inode_notifysecctx,
+ .inode_setsecctx = smack_inode_setsecctx,
+ .inode_getsecctx = smack_inode_getsecctx,
};
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index fdd1f4b8..3c8bd8e 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -1285,6 +1285,36 @@
}
/**
+ * tomoyo_delete_domain - Delete a domain.
+ *
+ * @domainname: The name of domain.
+ *
+ * Returns 0.
+ */
+static int tomoyo_delete_domain(char *domainname)
+{
+ struct tomoyo_domain_info *domain;
+ struct tomoyo_path_info name;
+
+ name.name = domainname;
+ tomoyo_fill_path_info(&name);
+ down_write(&tomoyo_domain_list_lock);
+ /* Is there an active domain? */
+ list_for_each_entry(domain, &tomoyo_domain_list, list) {
+ /* Never delete tomoyo_kernel_domain */
+ if (domain == &tomoyo_kernel_domain)
+ continue;
+ if (domain->is_deleted ||
+ tomoyo_pathcmp(domain->domainname, &name))
+ continue;
+ domain->is_deleted = true;
+ break;
+ }
+ up_write(&tomoyo_domain_list_lock);
+ return 0;
+}
+
+/**
* tomoyo_write_domain_policy - Write domain policy.
*
* @head: Pointer to "struct tomoyo_io_buffer".
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index 6d6ba09..31df541 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -339,8 +339,6 @@
const char *tomoyo_get_msg(const bool is_enforce);
/* Convert single path operation to operation name. */
const char *tomoyo_sp2keyword(const u8 operation);
-/* Delete a domain. */
-int tomoyo_delete_domain(char *data);
/* Create "alias" entry in exception policy. */
int tomoyo_write_alias_policy(char *data, const bool is_delete);
/*
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index 1d8b169..fcf52ac 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -717,38 +717,6 @@
return tomoyo_update_alias_entry(data, cp, is_delete);
}
-/* Domain create/delete handler. */
-
-/**
- * tomoyo_delete_domain - Delete a domain.
- *
- * @domainname: The name of domain.
- *
- * Returns 0.
- */
-int tomoyo_delete_domain(char *domainname)
-{
- struct tomoyo_domain_info *domain;
- struct tomoyo_path_info name;
-
- name.name = domainname;
- tomoyo_fill_path_info(&name);
- down_write(&tomoyo_domain_list_lock);
- /* Is there an active domain? */
- list_for_each_entry(domain, &tomoyo_domain_list, list) {
- /* Never delete tomoyo_kernel_domain */
- if (domain == &tomoyo_kernel_domain)
- continue;
- if (domain->is_deleted ||
- tomoyo_pathcmp(domain->domainname, &name))
- continue;
- domain->is_deleted = true;
- break;
- }
- up_write(&tomoyo_domain_list_lock);
- return 0;
-}
-
/**
* tomoyo_find_or_assign_new_domain - Create a domain.
*
@@ -818,13 +786,11 @@
/**
* tomoyo_find_next_domain - Find a domain.
*
- * @bprm: Pointer to "struct linux_binprm".
- * @next_domain: Pointer to pointer to "struct tomoyo_domain_info".
+ * @bprm: Pointer to "struct linux_binprm".
*
* Returns 0 on success, negative value otherwise.
*/
-int tomoyo_find_next_domain(struct linux_binprm *bprm,
- struct tomoyo_domain_info **next_domain)
+int tomoyo_find_next_domain(struct linux_binprm *bprm)
{
/*
* This function assumes that the size of buffer returned by
@@ -946,9 +912,11 @@
tomoyo_set_domain_flag(old_domain, false,
TOMOYO_DOMAIN_FLAGS_TRANSITION_FAILED);
out:
+ if (!domain)
+ domain = old_domain;
+ bprm->cred->security = domain;
tomoyo_free(real_program_name);
tomoyo_free(symlink_program_name);
- *next_domain = domain ? domain : old_domain;
tomoyo_free(tmp);
return retval;
}
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 3194d09..9548a09 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -14,6 +14,12 @@
#include "tomoyo.h"
#include "realpath.h"
+static int tomoyo_cred_alloc_blank(struct cred *new, gfp_t gfp)
+{
+ new->security = NULL;
+ return 0;
+}
+
static int tomoyo_cred_prepare(struct cred *new, const struct cred *old,
gfp_t gfp)
{
@@ -25,6 +31,15 @@
return 0;
}
+static void tomoyo_cred_transfer(struct cred *new, const struct cred *old)
+{
+ /*
+ * Since "struct tomoyo_domain_info *" is a sharable pointer,
+ * we don't need to duplicate.
+ */
+ new->security = old->security;
+}
+
static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
{
int rc;
@@ -61,14 +76,8 @@
* Execute permission is checked against pathname passed to do_execve()
* using current domain.
*/
- if (!domain) {
- struct tomoyo_domain_info *next_domain = NULL;
- int retval = tomoyo_find_next_domain(bprm, &next_domain);
-
- if (!retval)
- bprm->cred->security = next_domain;
- return retval;
- }
+ if (!domain)
+ return tomoyo_find_next_domain(bprm);
/*
* Read permission is checked against interpreters using next domain.
* '1' is the result of open_to_namei_flags(O_RDONLY).
@@ -268,7 +277,9 @@
*/
static struct security_operations tomoyo_security_ops = {
.name = "tomoyo",
+ .cred_alloc_blank = tomoyo_cred_alloc_blank,
.cred_prepare = tomoyo_cred_prepare,
+ .cred_transfer = tomoyo_cred_transfer,
.bprm_set_creds = tomoyo_bprm_set_creds,
.bprm_check_security = tomoyo_bprm_check_security,
#ifdef CONFIG_SYSCTL
diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h
index 0fd588a..cd6ba0b 100644
--- a/security/tomoyo/tomoyo.h
+++ b/security/tomoyo/tomoyo.h
@@ -31,8 +31,7 @@
struct path *path2);
int tomoyo_check_rewrite_permission(struct tomoyo_domain_info *domain,
struct file *filp);
-int tomoyo_find_next_domain(struct linux_binprm *bprm,
- struct tomoyo_domain_info **next_domain);
+int tomoyo_find_next_domain(struct linux_binprm *bprm);
/* Index numbers for Access Controls. */
diff --git a/sound/Kconfig b/sound/Kconfig
index 1eceb85..439e15c 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -32,6 +32,34 @@
bool
default n
+config SOUND_OSS_CORE_PRECLAIM
+ bool "Preclaim OSS device numbers"
+ depends on SOUND_OSS_CORE
+ default y
+ help
+ With this option enabled, the kernel will claim all OSS device
+ numbers if any OSS support (native or emulation) is enabled
+ whether the respective module is loaded or not and try to load the
+ appropriate module using sound-slot/service-* and char-major-*
+ module aliases when one of the device numbers is opened. With
+ this option disabled, kernel will only claim actually in-use
+ device numbers and opening a missing device will generate only the
+ standard char-major-* aliases.
+
+ The only visible difference is use of additional module aliases
+ and whether OSS sound devices appear multiple times in
+ /proc/devices. sound-slot/service-* module aliases are scheduled
+ to be removed (ie. PRECLAIM won't be available) and this option is
+ to make the transition easier. This option can be overridden
+ during boot using the kernel parameter soundcore.preclaim_oss.
+
+ Disabling this allows alternative OSS implementations.
+
+ Please read Documentation/feature-removal-schedule.txt for
+ details.
+
+ If unusre, say Y.
+
source "sound/oss/dmasound/Kconfig"
if !M68K
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index c570ebd..4e34d19 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -170,6 +170,13 @@
struct snd_ac97_bus *ac97_bus;
struct snd_ac97_template ac97_template;
int ret;
+ pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
+
+ if (dev->id >= 0) {
+ dev_err(&dev->dev, "PXA2xx has only one AC97 port.\n");
+ ret = -ENXIO;
+ goto err_dev;
+ }
ret = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
THIS_MODULE, 0, &card);
@@ -200,6 +207,8 @@
snprintf(card->longname, sizeof(card->longname),
"%s (%s)", dev->dev.driver->name, card->mixername);
+ if (pdata && pdata->codec_pdata[0])
+ snd_ac97_dev_add_pdata(ac97_bus->codec[0], pdata->codec_pdata[0]);
snd_card_set_dev(card, &dev->dev);
ret = snd_card_register(card);
if (ret == 0) {
@@ -212,6 +221,7 @@
err:
if (card)
snd_card_free(card);
+err_dev:
return ret;
}
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 6205f37..743ac6a 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -136,6 +136,9 @@
{
struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
+ if (!prtd || !prtd->params)
+ return 0;
+
DCSR(prtd->dma_ch) &= ~DCSR_RUN;
DCSR(prtd->dma_ch) = 0;
DCMD(prtd->dma_ch) = 0;
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 6061fb5..c15682a 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -206,4 +206,8 @@
config SND_VMASTER
bool
+config SND_DMA_SGBUF
+ def_bool y
+ depends on X86
+
source "sound/core/seq/Kconfig"
diff --git a/sound/core/Makefile b/sound/core/Makefile
index 4229052..350a08d 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -13,7 +13,7 @@
pcm_memory.o
snd-page-alloc-y := memalloc.o
-snd-page-alloc-$(CONFIG_HAS_DMA) += sgbuf.o
+snd-page-alloc-$(CONFIG_SND_DMA_SGBUF) += sgbuf.o
snd-rawmidi-objs := rawmidi.o
snd-timer-objs := timer.o
diff --git a/sound/core/control.c b/sound/core/control.c
index 17b8d47..a8b7fab 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -414,7 +414,7 @@
EXPORT_SYMBOL(snd_ctl_remove_id);
/**
- * snd_ctl_remove_unlocked_id - remove the unlocked control of the given id and release it
+ * snd_ctl_remove_user_ctl - remove and release the unlocked user control
* @file: active control handle
* @id: the control id to remove
*
@@ -423,8 +423,8 @@
*
* Returns 0 if successful, or a negative error code on failure.
*/
-static int snd_ctl_remove_unlocked_id(struct snd_ctl_file * file,
- struct snd_ctl_elem_id *id)
+static int snd_ctl_remove_user_ctl(struct snd_ctl_file * file,
+ struct snd_ctl_elem_id *id)
{
struct snd_card *card = file->card;
struct snd_kcontrol *kctl;
@@ -433,15 +433,23 @@
down_write(&card->controls_rwsem);
kctl = snd_ctl_find_id(card, id);
if (kctl == NULL) {
- up_write(&card->controls_rwsem);
- return -ENOENT;
+ ret = -ENOENT;
+ goto error;
+ }
+ if (!(kctl->vd[0].access & SNDRV_CTL_ELEM_ACCESS_USER)) {
+ ret = -EINVAL;
+ goto error;
}
for (idx = 0; idx < kctl->count; idx++)
if (kctl->vd[idx].owner != NULL && kctl->vd[idx].owner != file) {
- up_write(&card->controls_rwsem);
- return -EBUSY;
+ ret = -EBUSY;
+ goto error;
}
ret = snd_ctl_remove(card, kctl);
+ if (ret < 0)
+ goto error;
+ card->user_ctl_count--;
+error:
up_write(&card->controls_rwsem);
return ret;
}
@@ -951,7 +959,7 @@
if (card->user_ctl_count >= MAX_USER_CONTROLS)
return -ENOMEM;
- if (info->count > 1024)
+ if (info->count < 1)
return -EINVAL;
access = info->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
(info->access & (SNDRV_CTL_ELEM_ACCESS_READWRITE|
@@ -1052,18 +1060,10 @@
struct snd_ctl_elem_id __user *_id)
{
struct snd_ctl_elem_id id;
- int err;
if (copy_from_user(&id, _id, sizeof(id)))
return -EFAULT;
- err = snd_ctl_remove_unlocked_id(file, &id);
- if (! err) {
- struct snd_card *card = file->card;
- down_write(&card->controls_rwsem);
- card->user_ctl_count--;
- up_write(&card->controls_rwsem);
- }
- return err;
+ return snd_ctl_remove_user_ctl(file, &id);
}
static int snd_ctl_subscribe_events(struct snd_ctl_file *file, int __user *ptr)
diff --git a/sound/core/info.c b/sound/core/info.c
index 35df614..d749a0d 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -88,12 +88,10 @@
char *nbuf;
nsize = PAGE_ALIGN(nsize);
- nbuf = kmalloc(nsize, GFP_KERNEL);
+ nbuf = krealloc(buffer->buffer, nsize, GFP_KERNEL);
if (! nbuf)
return -ENOMEM;
- memcpy(nbuf, buffer->buffer, buffer->len);
- kfree(buffer->buffer);
buffer->buffer = nbuf;
buffer->len = nsize;
return 0;
@@ -108,7 +106,7 @@
*
* Returns the size of output string.
*/
-int snd_iprintf(struct snd_info_buffer *buffer, char *fmt,...)
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...)
{
va_list args;
int len, res;
@@ -727,7 +725,7 @@
* Returns the updated pointer of the original string so that
* it can be used for the next call.
*/
-char *snd_info_get_str(char *dest, char *src, int len)
+const char *snd_info_get_str(char *dest, const char *src, int len)
{
int c;
diff --git a/sound/core/init.c b/sound/core/init.c
index d5d40d7..ec4a50c 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -31,6 +31,14 @@
#include <sound/control.h>
#include <sound/info.h>
+/* monitor files for graceful shutdown (hotplug) */
+struct snd_monitor_file {
+ struct file *file;
+ const struct file_operations *disconnected_f_op;
+ struct list_head shutdown_list; /* still need to shutdown */
+ struct list_head list; /* link of monitor files */
+};
+
static DEFINE_SPINLOCK(shutdown_lock);
static LIST_HEAD(shutdown_files);
diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c
index 1b3534d..9e92441 100644
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -199,6 +199,8 @@
case SNDRV_DMA_TYPE_DEV:
dmab->area = snd_malloc_dev_pages(device, size, &dmab->addr);
break;
+#endif
+#ifdef CONFIG_SND_DMA_SGBUF
case SNDRV_DMA_TYPE_DEV_SG:
snd_malloc_sgbuf_pages(device, size, dmab, NULL);
break;
@@ -269,6 +271,8 @@
case SNDRV_DMA_TYPE_DEV:
snd_free_dev_pages(dmab->dev.dev, dmab->bytes, dmab->area, dmab->addr);
break;
+#endif
+#ifdef CONFIG_SND_DMA_SGBUF
case SNDRV_DMA_TYPE_DEV_SG:
snd_free_sgbuf_pages(dmab);
break;
diff --git a/sound/core/misc.c b/sound/core/misc.c
index a9710e0..23a032c 100644
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -24,6 +24,20 @@
#include <linux/ioport.h>
#include <sound/core.h>
+#ifdef CONFIG_SND_DEBUG
+
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+#define DEFAULT_DEBUG_LEVEL 2
+#else
+#define DEFAULT_DEBUG_LEVEL 1
+#endif
+
+static int debug = DEFAULT_DEBUG_LEVEL;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0 = disable)");
+
+#endif /* CONFIG_SND_DEBUG */
+
void release_and_free_resource(struct resource *res)
{
if (res) {
@@ -35,46 +49,53 @@
EXPORT_SYMBOL(release_and_free_resource);
#ifdef CONFIG_SND_VERBOSE_PRINTK
-void snd_verbose_printk(const char *file, int line, const char *format, ...)
+/* strip the leading path if the given path is absolute */
+static const char *sanity_file_name(const char *path)
{
- va_list args;
-
- if (format[0] == '<' && format[1] >= '0' && format[1] <= '7' && format[2] == '>') {
- char tmp[] = "<0>";
- tmp[1] = format[1];
- printk("%sALSA %s:%d: ", tmp, file, line);
- format += 3;
- } else {
- printk("ALSA %s:%d: ", file, line);
- }
- va_start(args, format);
- vprintk(format, args);
- va_end(args);
+ if (*path == '/')
+ return strrchr(path, '/') + 1;
+ else
+ return path;
}
-EXPORT_SYMBOL(snd_verbose_printk);
+/* print file and line with a certain printk prefix */
+static int print_snd_pfx(unsigned int level, const char *path, int line,
+ const char *format)
+{
+ const char *file = sanity_file_name(path);
+ char tmp[] = "<0>";
+ const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
+ int ret = 0;
+
+ if (format[0] == '<' && format[2] == '>') {
+ tmp[1] = format[1];
+ pfx = tmp;
+ ret = 1;
+ }
+ printk("%sALSA %s:%d: ", pfx, file, line);
+ return ret;
+}
+#else
+#define print_snd_pfx(level, path, line, format) 0
#endif
-#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK)
-void snd_verbose_printd(const char *file, int line, const char *format, ...)
+#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+void __snd_printk(unsigned int level, const char *path, int line,
+ const char *format, ...)
{
va_list args;
- if (format[0] == '<' && format[1] >= '0' && format[1] <= '7' && format[2] == '>') {
- char tmp[] = "<0>";
- tmp[1] = format[1];
- printk("%sALSA %s:%d: ", tmp, file, line);
- format += 3;
- } else {
- printk(KERN_DEBUG "ALSA %s:%d: ", file, line);
- }
+#ifdef CONFIG_SND_DEBUG
+ if (debug < level)
+ return;
+#endif
va_start(args, format);
+ if (print_snd_pfx(level, path, line, format))
+ format += 3; /* skip the printk level-prefix */
vprintk(format, args);
va_end(args);
-
}
-
-EXPORT_SYMBOL(snd_verbose_printd);
+EXPORT_SYMBOL_GPL(__snd_printk);
#endif
#ifdef CONFIG_PCI
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index 5dcd8a5..7724238 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -1154,7 +1154,8 @@
struct snd_info_buffer *buffer)
{
struct snd_mixer_oss *mixer = entry->private_data;
- char line[128], str[32], idxstr[16], *cptr;
+ char line[128], str[32], idxstr[16];
+ const char *cptr;
int ch, idx;
struct snd_mixer_oss_assign_table *tbl;
struct slot *slot;
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index dbe406b..d9c9635 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1043,10 +1043,15 @@
runtime->oss.channels = params_channels(params);
runtime->oss.rate = params_rate(params);
- runtime->oss.params = 0;
- runtime->oss.prepare = 1;
vfree(runtime->oss.buffer);
runtime->oss.buffer = vmalloc(runtime->oss.period_bytes);
+ if (!runtime->oss.buffer) {
+ err = -ENOMEM;
+ goto failure;
+ }
+
+ runtime->oss.params = 0;
+ runtime->oss.prepare = 1;
runtime->oss.buffer_used = 0;
if (runtime->dma_area)
snd_pcm_format_set_silence(runtime->format, runtime->dma_area, bytes_to_samples(runtime, runtime->dma_bytes));
@@ -2836,7 +2841,8 @@
struct snd_info_buffer *buffer)
{
struct snd_pcm_str *pstr = entry->private_data;
- char line[128], str[32], task_name[32], *ptr;
+ char line[128], str[32], task_name[32];
+ const char *ptr;
int idx1;
struct snd_pcm_oss_setup *setup, *setup1, template;
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 145931a..0c14401 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -162,18 +162,7 @@
return -ENOIOCTLCMD;
}
-#ifdef CONFIG_SND_VERBOSE_PROCFS
-
-#define STATE(v) [SNDRV_PCM_STATE_##v] = #v
-#define STREAM(v) [SNDRV_PCM_STREAM_##v] = #v
-#define READY(v) [SNDRV_PCM_READY_##v] = #v
-#define XRUN(v) [SNDRV_PCM_XRUN_##v] = #v
-#define SILENCE(v) [SNDRV_PCM_SILENCE_##v] = #v
-#define TSTAMP(v) [SNDRV_PCM_TSTAMP_##v] = #v
-#define ACCESS(v) [SNDRV_PCM_ACCESS_##v] = #v
-#define START(v) [SNDRV_PCM_START_##v] = #v
#define FORMAT(v) [SNDRV_PCM_FORMAT_##v] = #v
-#define SUBFORMAT(v) [SNDRV_PCM_SUBFORMAT_##v] = #v
static char *snd_pcm_format_names[] = {
FORMAT(S8),
@@ -216,10 +205,23 @@
FORMAT(U18_3BE),
};
-static const char *snd_pcm_format_name(snd_pcm_format_t format)
+const char *snd_pcm_format_name(snd_pcm_format_t format)
{
return snd_pcm_format_names[format];
}
+EXPORT_SYMBOL_GPL(snd_pcm_format_name);
+
+#ifdef CONFIG_SND_VERBOSE_PROCFS
+
+#define STATE(v) [SNDRV_PCM_STATE_##v] = #v
+#define STREAM(v) [SNDRV_PCM_STREAM_##v] = #v
+#define READY(v) [SNDRV_PCM_READY_##v] = #v
+#define XRUN(v) [SNDRV_PCM_XRUN_##v] = #v
+#define SILENCE(v) [SNDRV_PCM_SILENCE_##v] = #v
+#define TSTAMP(v) [SNDRV_PCM_TSTAMP_##v] = #v
+#define ACCESS(v) [SNDRV_PCM_ACCESS_##v] = #v
+#define START(v) [SNDRV_PCM_START_##v] = #v
+#define SUBFORMAT(v) [SNDRV_PCM_SUBFORMAT_##v] = #v
static char *snd_pcm_stream_names[] = {
STREAM(PLAYBACK),
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 72cfd47..30f4108 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -197,12 +197,16 @@
avail = snd_pcm_capture_avail(runtime);
if (avail > runtime->avail_max)
runtime->avail_max = avail;
- if (avail >= runtime->stop_threshold) {
- if (substream->runtime->status->state == SNDRV_PCM_STATE_DRAINING)
+ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) {
+ if (avail >= runtime->buffer_size) {
snd_pcm_drain_done(substream);
- else
+ return -EPIPE;
+ }
+ } else {
+ if (avail >= runtime->stop_threshold) {
xrun(substream);
- return -EPIPE;
+ return -EPIPE;
+ }
}
if (avail >= runtime->control->avail_min)
wake_up(&runtime->sleep);
@@ -943,47 +947,24 @@
int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask)
{
unsigned int k;
- int changed = 0;
+ struct snd_interval list_range;
if (!count) {
i->empty = 1;
return -EINVAL;
}
+ snd_interval_any(&list_range);
+ list_range.min = UINT_MAX;
+ list_range.max = 0;
for (k = 0; k < count; k++) {
if (mask && !(mask & (1 << k)))
continue;
- if (i->min == list[k] && !i->openmin)
- goto _l1;
- if (i->min < list[k]) {
- i->min = list[k];
- i->openmin = 0;
- changed = 1;
- goto _l1;
- }
- }
- i->empty = 1;
- return -EINVAL;
- _l1:
- for (k = count; k-- > 0;) {
- if (mask && !(mask & (1 << k)))
+ if (!snd_interval_test(i, list[k]))
continue;
- if (i->max == list[k] && !i->openmax)
- goto _l2;
- if (i->max > list[k]) {
- i->max = list[k];
- i->openmax = 0;
- changed = 1;
- goto _l2;
- }
+ list_range.min = min(list_range.min, list[k]);
+ list_range.max = max(list_range.max, list[k]);
}
- i->empty = 1;
- return -EINVAL;
- _l2:
- if (snd_interval_checkempty(i)) {
- i->empty = 1;
- return -EINVAL;
- }
- return changed;
+ return snd_interval_refine(i, &list_range);
}
EXPORT_SYMBOL(snd_interval_list);
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index a6d4280..caa7796 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -304,6 +304,7 @@
EXPORT_SYMBOL(snd_pcm_lib_preallocate_pages_for_all);
+#ifdef CONFIG_SND_DMA_SGBUF
/**
* snd_pcm_sgbuf_ops_page - get the page struct at the given offset
* @substream: the pcm substream instance
@@ -349,6 +350,7 @@
return size;
}
EXPORT_SYMBOL(snd_pcm_sgbuf_get_chunk_size);
+#endif /* CONFIG_SND_DMA_SGBUF */
/**
* snd_pcm_lib_malloc_pages - allocate the DMA buffer
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index ac2150e..59e5fbe 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1343,8 +1343,6 @@
static int snd_pcm_pre_drain_init(struct snd_pcm_substream *substream, int state)
{
- if (substream->f_flags & O_NONBLOCK)
- return -EAGAIN;
substream->runtime->trigger_master = substream;
return 0;
}
@@ -1392,7 +1390,6 @@
struct drain_rec {
struct snd_pcm_substream *substream;
wait_queue_t wait;
- snd_pcm_uframes_t stop_threshold;
};
static int snd_pcm_drop(struct snd_pcm_substream *substream);
@@ -1404,13 +1401,15 @@
* After this call, all streams are supposed to be either SETUP or DRAINING
* (capture only) state.
*/
-static int snd_pcm_drain(struct snd_pcm_substream *substream)
+static int snd_pcm_drain(struct snd_pcm_substream *substream,
+ struct file *file)
{
struct snd_card *card;
struct snd_pcm_runtime *runtime;
struct snd_pcm_substream *s;
int result = 0;
int i, num_drecs;
+ int nonblock = 0;
struct drain_rec *drec, drec_tmp, *d;
card = substream->pcm->card;
@@ -1428,6 +1427,15 @@
}
}
+ if (file) {
+ if (file->f_flags & O_NONBLOCK)
+ nonblock = 1;
+ } else if (substream->f_flags & O_NONBLOCK)
+ nonblock = 1;
+
+ if (nonblock)
+ goto lock; /* no need to allocate waitqueues */
+
/* allocate temporary record for drain sync */
down_read(&snd_pcm_link_rwsem);
if (snd_pcm_stream_linked(substream)) {
@@ -1449,16 +1457,11 @@
d->substream = s;
init_waitqueue_entry(&d->wait, current);
add_wait_queue(&runtime->sleep, &d->wait);
- /* stop_threshold fixup to avoid endless loop when
- * stop_threshold > buffer_size
- */
- d->stop_threshold = runtime->stop_threshold;
- if (runtime->stop_threshold > runtime->buffer_size)
- runtime->stop_threshold = runtime->buffer_size;
}
}
up_read(&snd_pcm_link_rwsem);
+ lock:
snd_pcm_stream_lock_irq(substream);
/* resume pause */
if (substream->runtime->status->state == SNDRV_PCM_STATE_PAUSED)
@@ -1466,9 +1469,12 @@
/* pre-start/stop - all running streams are changed to DRAINING state */
result = snd_pcm_action(&snd_pcm_action_drain_init, substream, 0);
- if (result < 0) {
- snd_pcm_stream_unlock_irq(substream);
- goto _error;
+ if (result < 0)
+ goto unlock;
+ /* in non-blocking, we don't wait in ioctl but let caller poll */
+ if (nonblock) {
+ result = -EAGAIN;
+ goto unlock;
}
for (;;) {
@@ -1504,18 +1510,18 @@
}
}
+ unlock:
snd_pcm_stream_unlock_irq(substream);
- _error:
- for (i = 0; i < num_drecs; i++) {
- d = &drec[i];
- runtime = d->substream->runtime;
- remove_wait_queue(&runtime->sleep, &d->wait);
- runtime->stop_threshold = d->stop_threshold;
+ if (!nonblock) {
+ for (i = 0; i < num_drecs; i++) {
+ d = &drec[i];
+ runtime = d->substream->runtime;
+ remove_wait_queue(&runtime->sleep, &d->wait);
+ }
+ if (drec != &drec_tmp)
+ kfree(drec);
}
-
- if (drec != &drec_tmp)
- kfree(drec);
snd_power_unlock(card);
return result;
@@ -2208,6 +2214,9 @@
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
@@ -2253,6 +2262,9 @@
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
@@ -2299,6 +2311,9 @@
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
@@ -2345,6 +2360,9 @@
case SNDRV_PCM_STATE_XRUN:
ret = -EPIPE;
goto __end;
+ case SNDRV_PCM_STATE_SUSPENDED:
+ ret = -ESTRPIPE;
+ goto __end;
default:
ret = -EBADFD;
goto __end;
@@ -2544,7 +2562,7 @@
return snd_pcm_hw_params_old_user(substream, arg);
#endif
case SNDRV_PCM_IOCTL_DRAIN:
- return snd_pcm_drain(substream);
+ return snd_pcm_drain(substream, file);
case SNDRV_PCM_IOCTL_DROP:
return snd_pcm_drop(substream);
case SNDRV_PCM_IOCTL_PAUSE:
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index 473247c..c0adc14 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -274,7 +274,7 @@
return err;
substream->opened = 1;
if (substream->use_count++ == 0)
- substream->active_sensing = 1;
+ substream->active_sensing = 0;
if (mode & SNDRV_RAWMIDI_LFLG_APPEND)
substream->append = 1;
rmidi->streams[substream->stream].substream_opened++;
diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c
index 0a711d2..9dfb2f7 100644
--- a/sound/core/seq/oss/seq_oss_midi.c
+++ b/sound/core/seq/oss/seq_oss_midi.c
@@ -20,6 +20,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <sound/asoundef.h>
#include "seq_oss_midi.h"
#include "seq_oss_readq.h"
#include "seq_oss_timer.h"
@@ -476,19 +477,20 @@
ev.source.port = dp->port;
if (dp->seq_mode == SNDRV_SEQ_OSS_MODE_SYNTH) {
ev.type = SNDRV_SEQ_EVENT_SENSING;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* active sensing */
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
}
for (c = 0; c < 16; c++) {
ev.type = SNDRV_SEQ_EVENT_CONTROLLER;
ev.data.control.channel = c;
- ev.data.control.param = 123;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* all notes off */
+ ev.data.control.param = MIDI_CTL_ALL_NOTES_OFF;
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
if (dp->seq_mode == SNDRV_SEQ_OSS_MODE_MUSIC) {
- ev.data.control.param = 121;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* reset all controllers */
+ ev.data.control.param =
+ MIDI_CTL_RESET_CONTROLLERS;
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
ev.type = SNDRV_SEQ_EVENT_PITCHBEND;
ev.data.control.value = 0;
- snd_seq_oss_dispatch(dp, &ev, 0, 0); /* bender off */
+ snd_seq_oss_dispatch(dp, &ev, 0, 0);
}
}
}
diff --git a/sound/core/seq/seq_midi.c b/sound/core/seq/seq_midi.c
index 4d26146..ebaf1b5 100644
--- a/sound/core/seq/seq_midi.c
+++ b/sound/core/seq/seq_midi.c
@@ -120,7 +120,8 @@
return -EINVAL;
runtime = substream->runtime;
if ((tmp = runtime->avail) < count) {
- snd_printd("warning, output event was lost (count = %i, available = %i)\n", count, tmp);
+ if (printk_ratelimit())
+ snd_printk(KERN_ERR "MIDI output buffer overrun\n");
return -ENOMEM;
}
if (snd_rawmidi_kernel_write(substream, buf, count) < count)
@@ -236,6 +237,7 @@
memset(¶ms, 0, sizeof(params));
params.avail_min = 1;
params.buffer_size = output_buffer_size;
+ params.no_active_sensing = 1;
if ((err = snd_rawmidi_output_params(msynth->output_rfile.output, ¶ms)) < 0) {
snd_rawmidi_kernel_release(&msynth->output_rfile);
return err;
@@ -248,12 +250,9 @@
static int midisynth_unuse(void *private_data, struct snd_seq_port_subscribe *info)
{
struct seq_midisynth *msynth = private_data;
- unsigned char buf = 0xff; /* MIDI reset */
if (snd_BUG_ON(!msynth->output_rfile.output))
return -EINVAL;
- /* sending single MIDI reset message to shut the device up */
- snd_rawmidi_kernel_write(msynth->output_rfile.output, &buf, 1);
snd_rawmidi_drain_output(msynth->output_rfile.output);
return snd_rawmidi_kernel_release(&msynth->output_rfile);
}
diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c
index 257624b..3b9b550 100644
--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -353,7 +353,8 @@
*
* The optional argument @tlv can be used to specify the TLV information
* for dB scale of the master control. It should be a single element
- * with #SNDRV_CTL_TLVT_DB_SCALE type, and should be the max 0dB.
+ * with #SNDRV_CTL_TLVT_DB_SCALE, #SNDRV_CTL_TLV_DB_MINMAX or
+ * #SNDRV_CTL_TLVT_DB_MINMAX_MUTE type, and should be the max 0dB.
*/
struct snd_kcontrol *snd_ctl_make_virtual_master(char *name,
const unsigned int *tlv)
@@ -384,7 +385,10 @@
kctl->private_free = master_free;
/* additional (constant) TLV read */
- if (tlv && tlv[0] == SNDRV_CTL_TLVT_DB_SCALE) {
+ if (tlv &&
+ (tlv[0] == SNDRV_CTL_TLVT_DB_SCALE ||
+ tlv[0] == SNDRV_CTL_TLVT_DB_MINMAX ||
+ tlv[0] == SNDRV_CTL_TLVT_DB_MINMAX_MUTE)) {
kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
memcpy(master->tlv, tlv, sizeof(master->tlv));
kctl->tlv.p = master->tlv;
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index 54239d2..6ba066c 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -25,12 +25,15 @@
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/wait.h>
+#include <linux/hrtimer.h>
+#include <linux/math64.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/tlv.h>
#include <sound/pcm.h>
#include <sound/rawmidi.h>
+#include <sound/info.h>
#include <sound/initval.h>
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
@@ -39,7 +42,7 @@
MODULE_SUPPORTED_DEVICE("{{ALSA,Dummy soundcard}}");
#define MAX_PCM_DEVICES 4
-#define MAX_PCM_SUBSTREAMS 16
+#define MAX_PCM_SUBSTREAMS 128
#define MAX_MIDI_DEVICES 2
#if 0 /* emu10k1 emulation */
@@ -148,6 +151,10 @@
static int pcm_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8};
//static int midi_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
+#ifdef CONFIG_HIGH_RES_TIMERS
+static int hrtimer = 1;
+#endif
+static int fake_buffer = 1;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for dummy soundcard.");
@@ -161,6 +168,12 @@
MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for dummy driver.");
//module_param_array(midi_devs, int, NULL, 0444);
//MODULE_PARM_DESC(midi_devs, "MIDI devices # (0-2) for dummy driver.");
+module_param(fake_buffer, bool, 0444);
+MODULE_PARM_DESC(fake_buffer, "Fake buffer allocations.");
+#ifdef CONFIG_HIGH_RES_TIMERS
+module_param(hrtimer, bool, 0644);
+MODULE_PARM_DESC(hrtimer, "Use hrtimer as the timer source.");
+#endif
static struct platform_device *devices[SNDRV_CARDS];
@@ -171,119 +184,324 @@
#define MIXER_ADDR_CD 4
#define MIXER_ADDR_LAST 4
+struct dummy_timer_ops {
+ int (*create)(struct snd_pcm_substream *);
+ void (*free)(struct snd_pcm_substream *);
+ int (*prepare)(struct snd_pcm_substream *);
+ int (*start)(struct snd_pcm_substream *);
+ int (*stop)(struct snd_pcm_substream *);
+ snd_pcm_uframes_t (*pointer)(struct snd_pcm_substream *);
+};
+
struct snd_dummy {
struct snd_card *card;
struct snd_pcm *pcm;
spinlock_t mixer_lock;
int mixer_volume[MIXER_ADDR_LAST+1][2];
int capture_source[MIXER_ADDR_LAST+1][2];
+ const struct dummy_timer_ops *timer_ops;
};
-struct snd_dummy_pcm {
- struct snd_dummy *dummy;
+/*
+ * system timer interface
+ */
+
+struct dummy_systimer_pcm {
spinlock_t lock;
struct timer_list timer;
- unsigned int pcm_buffer_size;
- unsigned int pcm_period_size;
- unsigned int pcm_bps; /* bytes per second */
- unsigned int pcm_hz; /* HZ */
- unsigned int pcm_irq_pos; /* IRQ position */
- unsigned int pcm_buf_pos; /* position in buffer */
+ unsigned long base_time;
+ unsigned int frac_pos; /* fractional sample position (based HZ) */
+ unsigned int frac_period_rest;
+ unsigned int frac_buffer_size; /* buffer_size * HZ */
+ unsigned int frac_period_size; /* period_size * HZ */
+ unsigned int rate;
+ int elapsed;
struct snd_pcm_substream *substream;
};
-
-static inline void snd_card_dummy_pcm_timer_start(struct snd_dummy_pcm *dpcm)
+static void dummy_systimer_rearm(struct dummy_systimer_pcm *dpcm)
{
- dpcm->timer.expires = 1 + jiffies;
+ dpcm->timer.expires = jiffies +
+ (dpcm->frac_period_rest + dpcm->rate - 1) / dpcm->rate;
add_timer(&dpcm->timer);
}
-static inline void snd_card_dummy_pcm_timer_stop(struct snd_dummy_pcm *dpcm)
+static void dummy_systimer_update(struct dummy_systimer_pcm *dpcm)
{
- del_timer(&dpcm->timer);
+ unsigned long delta;
+
+ delta = jiffies - dpcm->base_time;
+ if (!delta)
+ return;
+ dpcm->base_time += delta;
+ delta *= dpcm->rate;
+ dpcm->frac_pos += delta;
+ while (dpcm->frac_pos >= dpcm->frac_buffer_size)
+ dpcm->frac_pos -= dpcm->frac_buffer_size;
+ while (dpcm->frac_period_rest <= delta) {
+ dpcm->elapsed++;
+ dpcm->frac_period_rest += dpcm->frac_period_size;
+ }
+ dpcm->frac_period_rest -= delta;
}
-static int snd_card_dummy_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+static int dummy_systimer_start(struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm = runtime->private_data;
- int err = 0;
-
+ struct dummy_systimer_pcm *dpcm = substream->runtime->private_data;
spin_lock(&dpcm->lock);
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- snd_card_dummy_pcm_timer_start(dpcm);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- snd_card_dummy_pcm_timer_stop(dpcm);
- break;
- default:
- err = -EINVAL;
- break;
- }
+ dpcm->base_time = jiffies;
+ dummy_systimer_rearm(dpcm);
spin_unlock(&dpcm->lock);
return 0;
}
-static int snd_card_dummy_pcm_prepare(struct snd_pcm_substream *substream)
+static int dummy_systimer_stop(struct snd_pcm_substream *substream)
+{
+ struct dummy_systimer_pcm *dpcm = substream->runtime->private_data;
+ spin_lock(&dpcm->lock);
+ del_timer(&dpcm->timer);
+ spin_unlock(&dpcm->lock);
+ return 0;
+}
+
+static int dummy_systimer_prepare(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm = runtime->private_data;
- int bps;
+ struct dummy_systimer_pcm *dpcm = runtime->private_data;
- bps = snd_pcm_format_width(runtime->format) * runtime->rate *
- runtime->channels / 8;
-
- if (bps <= 0)
- return -EINVAL;
-
- dpcm->pcm_bps = bps;
- dpcm->pcm_hz = HZ;
- dpcm->pcm_buffer_size = snd_pcm_lib_buffer_bytes(substream);
- dpcm->pcm_period_size = snd_pcm_lib_period_bytes(substream);
- dpcm->pcm_irq_pos = 0;
- dpcm->pcm_buf_pos = 0;
-
- snd_pcm_format_set_silence(runtime->format, runtime->dma_area,
- bytes_to_samples(runtime, runtime->dma_bytes));
+ dpcm->frac_pos = 0;
+ dpcm->rate = runtime->rate;
+ dpcm->frac_buffer_size = runtime->buffer_size * HZ;
+ dpcm->frac_period_size = runtime->period_size * HZ;
+ dpcm->frac_period_rest = dpcm->frac_period_size;
+ dpcm->elapsed = 0;
return 0;
}
-static void snd_card_dummy_pcm_timer_function(unsigned long data)
+static void dummy_systimer_callback(unsigned long data)
{
- struct snd_dummy_pcm *dpcm = (struct snd_dummy_pcm *)data;
+ struct dummy_systimer_pcm *dpcm = (struct dummy_systimer_pcm *)data;
unsigned long flags;
+ int elapsed = 0;
spin_lock_irqsave(&dpcm->lock, flags);
- dpcm->timer.expires = 1 + jiffies;
- add_timer(&dpcm->timer);
- dpcm->pcm_irq_pos += dpcm->pcm_bps;
- dpcm->pcm_buf_pos += dpcm->pcm_bps;
- dpcm->pcm_buf_pos %= dpcm->pcm_buffer_size * dpcm->pcm_hz;
- if (dpcm->pcm_irq_pos >= dpcm->pcm_period_size * dpcm->pcm_hz) {
- dpcm->pcm_irq_pos %= dpcm->pcm_period_size * dpcm->pcm_hz;
- spin_unlock_irqrestore(&dpcm->lock, flags);
+ dummy_systimer_update(dpcm);
+ dummy_systimer_rearm(dpcm);
+ elapsed = dpcm->elapsed;
+ dpcm->elapsed = 0;
+ spin_unlock_irqrestore(&dpcm->lock, flags);
+ if (elapsed)
snd_pcm_period_elapsed(dpcm->substream);
- } else
- spin_unlock_irqrestore(&dpcm->lock, flags);
}
-static snd_pcm_uframes_t snd_card_dummy_pcm_pointer(struct snd_pcm_substream *substream)
+static snd_pcm_uframes_t
+dummy_systimer_pointer(struct snd_pcm_substream *substream)
+{
+ struct dummy_systimer_pcm *dpcm = substream->runtime->private_data;
+ snd_pcm_uframes_t pos;
+
+ spin_lock(&dpcm->lock);
+ dummy_systimer_update(dpcm);
+ pos = dpcm->frac_pos / HZ;
+ spin_unlock(&dpcm->lock);
+ return pos;
+}
+
+static int dummy_systimer_create(struct snd_pcm_substream *substream)
+{
+ struct dummy_systimer_pcm *dpcm;
+
+ dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL);
+ if (!dpcm)
+ return -ENOMEM;
+ substream->runtime->private_data = dpcm;
+ init_timer(&dpcm->timer);
+ dpcm->timer.data = (unsigned long) dpcm;
+ dpcm->timer.function = dummy_systimer_callback;
+ spin_lock_init(&dpcm->lock);
+ dpcm->substream = substream;
+ return 0;
+}
+
+static void dummy_systimer_free(struct snd_pcm_substream *substream)
+{
+ kfree(substream->runtime->private_data);
+}
+
+static struct dummy_timer_ops dummy_systimer_ops = {
+ .create = dummy_systimer_create,
+ .free = dummy_systimer_free,
+ .prepare = dummy_systimer_prepare,
+ .start = dummy_systimer_start,
+ .stop = dummy_systimer_stop,
+ .pointer = dummy_systimer_pointer,
+};
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+/*
+ * hrtimer interface
+ */
+
+struct dummy_hrtimer_pcm {
+ ktime_t base_time;
+ ktime_t period_time;
+ atomic_t running;
+ struct hrtimer timer;
+ struct tasklet_struct tasklet;
+ struct snd_pcm_substream *substream;
+};
+
+static void dummy_hrtimer_pcm_elapsed(unsigned long priv)
+{
+ struct dummy_hrtimer_pcm *dpcm = (struct dummy_hrtimer_pcm *)priv;
+ if (atomic_read(&dpcm->running))
+ snd_pcm_period_elapsed(dpcm->substream);
+}
+
+static enum hrtimer_restart dummy_hrtimer_callback(struct hrtimer *timer)
+{
+ struct dummy_hrtimer_pcm *dpcm;
+
+ dpcm = container_of(timer, struct dummy_hrtimer_pcm, timer);
+ if (!atomic_read(&dpcm->running))
+ return HRTIMER_NORESTART;
+ tasklet_schedule(&dpcm->tasklet);
+ hrtimer_forward_now(timer, dpcm->period_time);
+ return HRTIMER_RESTART;
+}
+
+static int dummy_hrtimer_start(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm = substream->runtime->private_data;
+
+ dpcm->base_time = hrtimer_cb_get_time(&dpcm->timer);
+ hrtimer_start(&dpcm->timer, dpcm->period_time, HRTIMER_MODE_REL);
+ atomic_set(&dpcm->running, 1);
+ return 0;
+}
+
+static int dummy_hrtimer_stop(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm = substream->runtime->private_data;
+
+ atomic_set(&dpcm->running, 0);
+ hrtimer_cancel(&dpcm->timer);
+ return 0;
+}
+
+static inline void dummy_hrtimer_sync(struct dummy_hrtimer_pcm *dpcm)
+{
+ tasklet_kill(&dpcm->tasklet);
+}
+
+static snd_pcm_uframes_t
+dummy_hrtimer_pointer(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm = runtime->private_data;
+ struct dummy_hrtimer_pcm *dpcm = runtime->private_data;
+ u64 delta;
+ u32 pos;
- return bytes_to_frames(runtime, dpcm->pcm_buf_pos / dpcm->pcm_hz);
+ delta = ktime_us_delta(hrtimer_cb_get_time(&dpcm->timer),
+ dpcm->base_time);
+ delta = div_u64(delta * runtime->rate + 999999, 1000000);
+ div_u64_rem(delta, runtime->buffer_size, &pos);
+ return pos;
}
-static struct snd_pcm_hardware snd_card_dummy_playback =
+static int dummy_hrtimer_prepare(struct snd_pcm_substream *substream)
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID),
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct dummy_hrtimer_pcm *dpcm = runtime->private_data;
+ unsigned int period, rate;
+ long sec;
+ unsigned long nsecs;
+
+ dummy_hrtimer_sync(dpcm);
+ period = runtime->period_size;
+ rate = runtime->rate;
+ sec = period / rate;
+ period %= rate;
+ nsecs = div_u64((u64)period * 1000000000UL + rate - 1, rate);
+ dpcm->period_time = ktime_set(sec, nsecs);
+
+ return 0;
+}
+
+static int dummy_hrtimer_create(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm;
+
+ dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL);
+ if (!dpcm)
+ return -ENOMEM;
+ substream->runtime->private_data = dpcm;
+ hrtimer_init(&dpcm->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ dpcm->timer.function = dummy_hrtimer_callback;
+ dpcm->substream = substream;
+ atomic_set(&dpcm->running, 0);
+ tasklet_init(&dpcm->tasklet, dummy_hrtimer_pcm_elapsed,
+ (unsigned long)dpcm);
+ return 0;
+}
+
+static void dummy_hrtimer_free(struct snd_pcm_substream *substream)
+{
+ struct dummy_hrtimer_pcm *dpcm = substream->runtime->private_data;
+ dummy_hrtimer_sync(dpcm);
+ kfree(dpcm);
+}
+
+static struct dummy_timer_ops dummy_hrtimer_ops = {
+ .create = dummy_hrtimer_create,
+ .free = dummy_hrtimer_free,
+ .prepare = dummy_hrtimer_prepare,
+ .start = dummy_hrtimer_start,
+ .stop = dummy_hrtimer_stop,
+ .pointer = dummy_hrtimer_pointer,
+};
+
+#endif /* CONFIG_HIGH_RES_TIMERS */
+
+/*
+ * PCM interface
+ */
+
+static int dummy_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ return dummy->timer_ops->start(substream);
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ return dummy->timer_ops->stop(substream);
+ }
+ return -EINVAL;
+}
+
+static int dummy_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+
+ return dummy->timer_ops->prepare(substream);
+}
+
+static snd_pcm_uframes_t dummy_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+
+ return dummy->timer_ops->pointer(substream);
+}
+
+static struct snd_pcm_hardware dummy_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_MMAP_VALID),
.formats = USE_FORMATS,
.rates = USE_RATE,
.rate_min = USE_RATE_MIN,
@@ -298,141 +516,152 @@
.fifo_size = 0,
};
-static struct snd_pcm_hardware snd_card_dummy_capture =
+static int dummy_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID),
- .formats = USE_FORMATS,
- .rates = USE_RATE,
- .rate_min = USE_RATE_MIN,
- .rate_max = USE_RATE_MAX,
- .channels_min = USE_CHANNELS_MIN,
- .channels_max = USE_CHANNELS_MAX,
- .buffer_bytes_max = MAX_BUFFER_SIZE,
- .period_bytes_min = 64,
- .period_bytes_max = MAX_PERIOD_SIZE,
- .periods_min = USE_PERIODS_MIN,
- .periods_max = USE_PERIODS_MAX,
- .fifo_size = 0,
-};
-
-static void snd_card_dummy_runtime_free(struct snd_pcm_runtime *runtime)
-{
- kfree(runtime->private_data);
+ if (fake_buffer) {
+ /* runtime->dma_bytes has to be set manually to allow mmap */
+ substream->runtime->dma_bytes = params_buffer_bytes(hw_params);
+ return 0;
+ }
+ return snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
}
-static int snd_card_dummy_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
+static int dummy_pcm_hw_free(struct snd_pcm_substream *substream)
{
- return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
-}
-
-static int snd_card_dummy_hw_free(struct snd_pcm_substream *substream)
-{
+ if (fake_buffer)
+ return 0;
return snd_pcm_lib_free_pages(substream);
}
-static struct snd_dummy_pcm *new_pcm_stream(struct snd_pcm_substream *substream)
+static int dummy_pcm_open(struct snd_pcm_substream *substream)
{
- struct snd_dummy_pcm *dpcm;
-
- dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL);
- if (! dpcm)
- return dpcm;
- init_timer(&dpcm->timer);
- dpcm->timer.data = (unsigned long) dpcm;
- dpcm->timer.function = snd_card_dummy_pcm_timer_function;
- spin_lock_init(&dpcm->lock);
- dpcm->substream = substream;
- return dpcm;
-}
-
-static int snd_card_dummy_playback_open(struct snd_pcm_substream *substream)
-{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm;
int err;
- if ((dpcm = new_pcm_stream(substream)) == NULL)
- return -ENOMEM;
- runtime->private_data = dpcm;
- /* makes the infrastructure responsible for freeing dpcm */
- runtime->private_free = snd_card_dummy_runtime_free;
- runtime->hw = snd_card_dummy_playback;
+ dummy->timer_ops = &dummy_systimer_ops;
+#ifdef CONFIG_HIGH_RES_TIMERS
+ if (hrtimer)
+ dummy->timer_ops = &dummy_hrtimer_ops;
+#endif
+
+ err = dummy->timer_ops->create(substream);
+ if (err < 0)
+ return err;
+
+ runtime->hw = dummy_pcm_hardware;
if (substream->pcm->device & 1) {
runtime->hw.info &= ~SNDRV_PCM_INFO_INTERLEAVED;
runtime->hw.info |= SNDRV_PCM_INFO_NONINTERLEAVED;
}
if (substream->pcm->device & 2)
- runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP|SNDRV_PCM_INFO_MMAP_VALID);
- err = add_playback_constraints(runtime);
- if (err < 0)
+ runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ err = add_playback_constraints(substream->runtime);
+ else
+ err = add_capture_constraints(substream->runtime);
+ if (err < 0) {
+ dummy->timer_ops->free(substream);
return err;
-
- return 0;
-}
-
-static int snd_card_dummy_capture_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_dummy_pcm *dpcm;
- int err;
-
- if ((dpcm = new_pcm_stream(substream)) == NULL)
- return -ENOMEM;
- runtime->private_data = dpcm;
- /* makes the infrastructure responsible for freeing dpcm */
- runtime->private_free = snd_card_dummy_runtime_free;
- runtime->hw = snd_card_dummy_capture;
- if (substream->pcm->device == 1) {
- runtime->hw.info &= ~SNDRV_PCM_INFO_INTERLEAVED;
- runtime->hw.info |= SNDRV_PCM_INFO_NONINTERLEAVED;
}
- if (substream->pcm->device & 2)
- runtime->hw.info &= ~(SNDRV_PCM_INFO_MMAP|SNDRV_PCM_INFO_MMAP_VALID);
- err = add_capture_constraints(runtime);
- if (err < 0)
- return err;
-
return 0;
}
-static int snd_card_dummy_playback_close(struct snd_pcm_substream *substream)
+static int dummy_pcm_close(struct snd_pcm_substream *substream)
{
+ struct snd_dummy *dummy = snd_pcm_substream_chip(substream);
+ dummy->timer_ops->free(substream);
return 0;
}
-static int snd_card_dummy_capture_close(struct snd_pcm_substream *substream)
+/*
+ * dummy buffer handling
+ */
+
+static void *dummy_page[2];
+
+static void free_fake_buffer(void)
{
+ if (fake_buffer) {
+ int i;
+ for (i = 0; i < 2; i++)
+ if (dummy_page[i]) {
+ free_page((unsigned long)dummy_page[i]);
+ dummy_page[i] = NULL;
+ }
+ }
+}
+
+static int alloc_fake_buffer(void)
+{
+ int i;
+
+ if (!fake_buffer)
+ return 0;
+ for (i = 0; i < 2; i++) {
+ dummy_page[i] = (void *)get_zeroed_page(GFP_KERNEL);
+ if (!dummy_page[i]) {
+ free_fake_buffer();
+ return -ENOMEM;
+ }
+ }
return 0;
}
-static struct snd_pcm_ops snd_card_dummy_playback_ops = {
- .open = snd_card_dummy_playback_open,
- .close = snd_card_dummy_playback_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_card_dummy_hw_params,
- .hw_free = snd_card_dummy_hw_free,
- .prepare = snd_card_dummy_pcm_prepare,
- .trigger = snd_card_dummy_pcm_trigger,
- .pointer = snd_card_dummy_pcm_pointer,
+static int dummy_pcm_copy(struct snd_pcm_substream *substream,
+ int channel, snd_pcm_uframes_t pos,
+ void __user *dst, snd_pcm_uframes_t count)
+{
+ return 0; /* do nothing */
+}
+
+static int dummy_pcm_silence(struct snd_pcm_substream *substream,
+ int channel, snd_pcm_uframes_t pos,
+ snd_pcm_uframes_t count)
+{
+ return 0; /* do nothing */
+}
+
+static struct page *dummy_pcm_page(struct snd_pcm_substream *substream,
+ unsigned long offset)
+{
+ return virt_to_page(dummy_page[substream->stream]); /* the same page */
+}
+
+static struct snd_pcm_ops dummy_pcm_ops = {
+ .open = dummy_pcm_open,
+ .close = dummy_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dummy_pcm_hw_params,
+ .hw_free = dummy_pcm_hw_free,
+ .prepare = dummy_pcm_prepare,
+ .trigger = dummy_pcm_trigger,
+ .pointer = dummy_pcm_pointer,
};
-static struct snd_pcm_ops snd_card_dummy_capture_ops = {
- .open = snd_card_dummy_capture_open,
- .close = snd_card_dummy_capture_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_card_dummy_hw_params,
- .hw_free = snd_card_dummy_hw_free,
- .prepare = snd_card_dummy_pcm_prepare,
- .trigger = snd_card_dummy_pcm_trigger,
- .pointer = snd_card_dummy_pcm_pointer,
+static struct snd_pcm_ops dummy_pcm_ops_no_buf = {
+ .open = dummy_pcm_open,
+ .close = dummy_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dummy_pcm_hw_params,
+ .hw_free = dummy_pcm_hw_free,
+ .prepare = dummy_pcm_prepare,
+ .trigger = dummy_pcm_trigger,
+ .pointer = dummy_pcm_pointer,
+ .copy = dummy_pcm_copy,
+ .silence = dummy_pcm_silence,
+ .page = dummy_pcm_page,
};
static int __devinit snd_card_dummy_pcm(struct snd_dummy *dummy, int device,
int substreams)
{
struct snd_pcm *pcm;
+ struct snd_pcm_ops *ops;
int err;
err = snd_pcm_new(dummy->card, "Dummy PCM", device,
@@ -440,17 +669,28 @@
if (err < 0)
return err;
dummy->pcm = pcm;
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_card_dummy_playback_ops);
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_dummy_capture_ops);
+ if (fake_buffer)
+ ops = &dummy_pcm_ops_no_buf;
+ else
+ ops = &dummy_pcm_ops;
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, ops);
pcm->private_data = dummy;
pcm->info_flags = 0;
strcpy(pcm->name, "Dummy PCM");
- snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- 0, 64*1024);
+ if (!fake_buffer) {
+ snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ 0, 64*1024);
+ }
return 0;
}
+/*
+ * mixer interface
+ */
+
#define DUMMY_VOLUME(xname, xindex, addr) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
@@ -581,6 +821,131 @@
return 0;
}
+#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_PROC_FS)
+/*
+ * proc interface
+ */
+static void print_formats(struct snd_info_buffer *buffer)
+{
+ int i;
+
+ for (i = 0; i < SNDRV_PCM_FORMAT_LAST; i++) {
+ if (dummy_pcm_hardware.formats & (1ULL << i))
+ snd_iprintf(buffer, " %s", snd_pcm_format_name(i));
+ }
+}
+
+static void print_rates(struct snd_info_buffer *buffer)
+{
+ static int rates[] = {
+ 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000,
+ 64000, 88200, 96000, 176400, 192000,
+ };
+ int i;
+
+ if (dummy_pcm_hardware.rates & SNDRV_PCM_RATE_CONTINUOUS)
+ snd_iprintf(buffer, " continuous");
+ if (dummy_pcm_hardware.rates & SNDRV_PCM_RATE_KNOT)
+ snd_iprintf(buffer, " knot");
+ for (i = 0; i < ARRAY_SIZE(rates); i++)
+ if (dummy_pcm_hardware.rates & (1 << i))
+ snd_iprintf(buffer, " %d", rates[i]);
+}
+
+#define get_dummy_int_ptr(ofs) \
+ (unsigned int *)((char *)&dummy_pcm_hardware + (ofs))
+#define get_dummy_ll_ptr(ofs) \
+ (unsigned long long *)((char *)&dummy_pcm_hardware + (ofs))
+
+struct dummy_hw_field {
+ const char *name;
+ const char *format;
+ unsigned int offset;
+ unsigned int size;
+};
+#define FIELD_ENTRY(item, fmt) { \
+ .name = #item, \
+ .format = fmt, \
+ .offset = offsetof(struct snd_pcm_hardware, item), \
+ .size = sizeof(dummy_pcm_hardware.item) }
+
+static struct dummy_hw_field fields[] = {
+ FIELD_ENTRY(formats, "%#llx"),
+ FIELD_ENTRY(rates, "%#x"),
+ FIELD_ENTRY(rate_min, "%d"),
+ FIELD_ENTRY(rate_max, "%d"),
+ FIELD_ENTRY(channels_min, "%d"),
+ FIELD_ENTRY(channels_max, "%d"),
+ FIELD_ENTRY(buffer_bytes_max, "%ld"),
+ FIELD_ENTRY(period_bytes_min, "%ld"),
+ FIELD_ENTRY(period_bytes_max, "%ld"),
+ FIELD_ENTRY(periods_min, "%d"),
+ FIELD_ENTRY(periods_max, "%d"),
+};
+
+static void dummy_proc_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fields); i++) {
+ snd_iprintf(buffer, "%s ", fields[i].name);
+ if (fields[i].size == sizeof(int))
+ snd_iprintf(buffer, fields[i].format,
+ *get_dummy_int_ptr(fields[i].offset));
+ else
+ snd_iprintf(buffer, fields[i].format,
+ *get_dummy_ll_ptr(fields[i].offset));
+ if (!strcmp(fields[i].name, "formats"))
+ print_formats(buffer);
+ else if (!strcmp(fields[i].name, "rates"))
+ print_rates(buffer);
+ snd_iprintf(buffer, "\n");
+ }
+}
+
+static void dummy_proc_write(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ char line[64];
+
+ while (!snd_info_get_line(buffer, line, sizeof(line))) {
+ char item[20];
+ const char *ptr;
+ unsigned long long val;
+ int i;
+
+ ptr = snd_info_get_str(item, line, sizeof(item));
+ for (i = 0; i < ARRAY_SIZE(fields); i++) {
+ if (!strcmp(item, fields[i].name))
+ break;
+ }
+ if (i >= ARRAY_SIZE(fields))
+ continue;
+ snd_info_get_str(item, ptr, sizeof(item));
+ if (strict_strtoull(item, 0, &val))
+ continue;
+ if (fields[i].size == sizeof(int))
+ *get_dummy_int_ptr(fields[i].offset) = val;
+ else
+ *get_dummy_ll_ptr(fields[i].offset) = val;
+ }
+}
+
+static void __devinit dummy_proc_init(struct snd_dummy *chip)
+{
+ struct snd_info_entry *entry;
+
+ if (!snd_card_proc_new(chip->card, "dummy_pcm", &entry)) {
+ snd_info_set_text_ops(entry, chip, dummy_proc_read);
+ entry->c.text.write = dummy_proc_write;
+ entry->mode |= S_IWUSR;
+ }
+}
+#else
+#define dummy_proc_init(x)
+#endif /* CONFIG_SND_DEBUG && CONFIG_PROC_FS */
+
static int __devinit snd_dummy_probe(struct platform_device *devptr)
{
struct snd_card *card;
@@ -610,6 +975,8 @@
strcpy(card->shortname, "Dummy");
sprintf(card->longname, "Dummy %i", dev + 1);
+ dummy_proc_init(dummy);
+
snd_card_set_dev(card, &devptr->dev);
err = snd_card_register(card);
@@ -670,6 +1037,7 @@
for (i = 0; i < ARRAY_SIZE(devices); ++i)
platform_device_unregister(devices[i]);
platform_driver_unregister(&snd_dummy_driver);
+ free_fake_buffer();
}
static int __init alsa_card_dummy_init(void)
@@ -680,6 +1048,12 @@
if (err < 0)
return err;
+ err = alloc_fake_buffer();
+ if (err < 0) {
+ platform_driver_unregister(&snd_dummy_driver);
+ return err;
+ }
+
cards = 0;
for (i = 0; i < SNDRV_CARDS; i++) {
struct platform_device *device;
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index 3ee0269..02f79d2 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -1,5 +1,5 @@
/*
- * Driver for C-Media's CMI8330 soundcards.
+ * Driver for C-Media's CMI8330 and CMI8329 soundcards.
* Copyright (c) by George Talusan <gstalusan@uwaterloo.ca>
* http://www.undergrad.math.uwaterloo.ca/~gstalusa
*
@@ -35,7 +35,7 @@
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
- * The driver "magically" routes the capturing to the CMI8330 codec,
+ * The driver "magically" routes the capturing to the AD1848 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
@@ -64,7 +64,7 @@
/*
*/
MODULE_AUTHOR("George Talusan <gstalusan@uwaterloo.ca>");
-MODULE_DESCRIPTION("C-Media CMI8330");
+MODULE_DESCRIPTION("C-Media CMI8330/CMI8329");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}");
@@ -86,38 +86,38 @@
static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard.");
+MODULE_PARM_DESC(index, "Index value for CMI8330/CMI8329 soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for CMI8330 soundcard.");
+MODULE_PARM_DESC(id, "ID string for CMI8330/CMI8329 soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable CMI8330 soundcard.");
+MODULE_PARM_DESC(enable, "Enable CMI8330/CMI8329 soundcard.");
#ifdef CONFIG_PNP
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
module_param_array(sbport, long, NULL, 0444);
-MODULE_PARM_DESC(sbport, "Port # for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver.");
module_param_array(sbirq, int, NULL, 0444);
-MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma8, int, NULL, 0444);
-MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver.");
module_param_array(sbdma16, int, NULL, 0444);
-MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330 SB driver.");
+MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver.");
module_param_array(wssport, long, NULL, 0444);
-MODULE_PARM_DESC(wssport, "Port # for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssirq, int, NULL, 0444);
-MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver.");
module_param_array(wssdma, int, NULL, 0444);
-MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
+MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver.");
module_param_array(fmport, long, NULL, 0444);
-MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver.");
+MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver.");
module_param_array(mpuport, long, NULL, 0444);
-MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver.");
+MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver.");
module_param_array(mpuirq, int, NULL, 0444);
-MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port.");
+MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
@@ -156,6 +156,11 @@
typedef int (*snd_pcm_open_callback_t)(struct snd_pcm_substream *);
+enum card_type {
+ CMI8330,
+ CMI8329
+};
+
struct snd_cmi8330 {
#ifdef CONFIG_PNP
struct pnp_dev *cap;
@@ -172,11 +177,14 @@
snd_pcm_open_callback_t open;
void *private_data; /* sb or wss */
} streams[2];
+
+ enum card_type type;
};
#ifdef CONFIG_PNP
static struct pnp_card_device_id snd_cmi8330_pnpids[] = {
+ { .id = "CMI0001", .devs = { { "@X@0001" }, { "@@@0001" }, { "@H@0001" }, { "A@@0001" } } },
{ .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } },
{ .id = "" }
};
@@ -304,7 +312,7 @@
unsigned int idx;
int err;
- strcpy(card->mixername, "CMI8330/C3D");
+ strcpy(card->mixername, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) {
err = snd_ctl_add(card,
@@ -329,6 +337,9 @@
struct pnp_dev *pdev;
int err;
+ /* CMI8329 has a device with ID A@@0001, CMI8330 does not */
+ acard->type = (id->devs[3].id[0]) ? CMI8329 : CMI8330;
+
acard->cap = pnp_request_card_device(card, id->devs[0].id, NULL);
if (acard->cap == NULL)
return -EBUSY;
@@ -345,38 +356,45 @@
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
+ snd_printk(KERN_ERR "AD1848 PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
wssdma[dev] = pnp_dma(pdev, 0);
wssirq[dev] = pnp_irq(pdev, 0);
- fmport[dev] = pnp_port_start(pdev, 1);
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
pdev = acard->play;
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D (SB16) PnP configure failure\n");
+ snd_printk(KERN_ERR "SB16 PnP configure failure\n");
return -EBUSY;
}
sbport[dev] = pnp_port_start(pdev, 0);
sbdma8[dev] = pnp_dma(pdev, 0);
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
+ /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
+ if (fmport[dev] == SNDRV_AUTO_PORT) {
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
+ else
+ fmport[dev] = 0x388; /* Or hardwired */
+ }
/* allocate MPU-401 resources */
pdev = acard->mpu;
err = pnp_activate_dev(pdev);
- if (err < 0) {
- snd_printk(KERN_ERR
- "CMI8330/C3D (MPU-401) PnP configure failure\n");
- return -EBUSY;
+ if (err < 0)
+ snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n");
+ else {
+ mpuport[dev] = pnp_port_start(pdev, 0);
+ mpuirq[dev] = pnp_irq(pdev, 0);
}
- mpuport[dev] = pnp_port_start(pdev, 0);
- mpuirq[dev] = pnp_irq(pdev, 0);
return 0;
}
#endif
@@ -430,9 +448,9 @@
snd_cmi8330_capture_open
};
- if ((err = snd_pcm_new(card, "CMI8330", 0, 1, 1, &pcm)) < 0)
+ if ((err = snd_pcm_new(card, (chip->type == CMI8329) ? "CMI8329" : "CMI8330", 0, 1, 1, &pcm)) < 0)
return err;
- strcpy(pcm->name, "CMI8330");
+ strcpy(pcm->name, (chip->type == CMI8329) ? "CMI8329" : "CMI8330");
pcm->private_data = chip;
/* SB16 */
@@ -527,11 +545,11 @@
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
- snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
+ snd_printk(KERN_ERR PFX "AD1848 device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
- snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
+ snd_printk(KERN_ERR PFX "AD1848 not found during probe\n");
return -ENODEV;
}
@@ -541,11 +559,11 @@
sbdma8[dev],
sbdma16[dev],
SB_HW_AUTO, &acard->sb)) < 0) {
- snd_printk(KERN_ERR PFX "(SB16) device busy??\n");
+ snd_printk(KERN_ERR PFX "SB16 device busy??\n");
return err;
}
if (acard->sb->hardware != SB_HW_16) {
- snd_printk(KERN_ERR PFX "(SB16) not found during probe\n");
+ snd_printk(KERN_ERR PFX "SB16 not found during probe\n");
return err;
}
@@ -585,8 +603,8 @@
mpuport[dev]);
}
- strcpy(card->driver, "CMI8330/C3D");
- strcpy(card->shortname, "C-Media CMI8330/C3D");
+ strcpy(card->driver, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D");
+ strcpy(card->shortname, (acard->type == CMI8329) ? "C-Media CMI8329" : "C-Media CMI8330/C3D");
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
card->shortname,
acard->wss->port,
diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c
index a40be0c..782b3b8 100644
--- a/sound/oss/midibuf.c
+++ b/sound/oss/midibuf.c
@@ -127,15 +127,16 @@
for (dev = 0; dev < num_midis; dev++)
if (midi_devs[dev] != NULL && midi_out_buf[dev] != NULL)
{
- int ok = 1;
-
- while (DATA_AVAIL(midi_out_buf[dev]) && ok)
+ while (DATA_AVAIL(midi_out_buf[dev]))
{
+ int ok;
int c = midi_out_buf[dev]->queue[midi_out_buf[dev]->head];
spin_unlock_irqrestore(&lock,flags);/* Give some time to others */
ok = midi_devs[dev]->outputc(dev, c);
spin_lock_irqsave(&lock, flags);
+ if (!ok)
+ break;
midi_out_buf[dev]->head = (midi_out_buf[dev]->head + 1) % MAX_QUEUE_SIZE;
midi_out_buf[dev]->len--;
}
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c
index 187f727..6713110 100644
--- a/sound/oss/vwsnd.c
+++ b/sound/oss/vwsnd.c
@@ -628,7 +628,7 @@
ASSERT(!(buffer_paddr & 0xFF));
chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8);
- chan->cfgval = (!LI_CCFG_LOCK |
+ chan->cfgval = ((chan->cfgval & ~LI_CCFG_LOCK) |
SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) |
desc->direction |
mode |
@@ -638,9 +638,9 @@
tmask = 13 - fragshift; /* See Lithium DMA Notes above. */
ASSERT(size >= 2 && size <= 7);
ASSERT(tmask >= 1 && tmask <= 7);
- chan->ctlval = (!LI_CCTL_RESET |
+ chan->ctlval = ((chan->ctlval & ~LI_CCTL_RESET) |
SHIFT_FIELD(size, LI_CCTL_SIZE) |
- !LI_CCTL_DMA_ENABLE |
+ (chan->ctlval & ~LI_CCTL_DMA_ENABLE) |
SHIFT_FIELD(tmask, LI_CCTL_TMASK) |
SHIFT_FIELD(0, LI_CCTL_TPTR));
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 748f6b7..fb5ee3c 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -135,11 +135,11 @@
config SND_AZT3328
- tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Aztech AZF3328 / PCI168"
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
+ select SND_RAWMIDI
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index c551006..b458d20 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -310,12 +310,16 @@
unsigned int res;
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
res = snd_ali_5451_peek(codec,port);
if (!(res & 0x8000))
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_ali_5451_poke(codec, port, res & ~0x8000);
snd_printdd("ali_codec_ready: codec is not ready.\n ");
return -EIO;
@@ -327,15 +331,17 @@
unsigned long dwChk1,dwChk2;
dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
- dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
-
end_time = jiffies + msecs_to_jiffies(250);
- do {
+
+ for (;;) {
dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
if (dwChk2 != dwChk1)
return 0;
+ if (!time_after_eq(end_time, jiffies))
+ break;
schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
+ }
+
snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n");
return -EIO;
}
@@ -472,45 +478,6 @@
return 0;
}
-#ifdef CODEC_RESET
-
-static int snd_ali_reset_codec(struct snd_ali *codec)
-{
- struct pci_dev *pci_dev;
- unsigned char bVal;
- unsigned int dwVal;
- unsigned short wCount, wReg;
-
- pci_dev = codec->pci_m1533;
-
- pci_read_config_dword(pci_dev, 0x7c, &dwVal);
- pci_write_config_dword(pci_dev, 0x7c, dwVal | 0x08000000);
- udelay(5000);
- pci_read_config_dword(pci_dev, 0x7c, &dwVal);
- pci_write_config_dword(pci_dev, 0x7c, dwVal & 0xf7ffffff);
- udelay(5000);
-
- bVal = inb(ALI_REG(codec,ALI_SCTRL));
- bVal |= 0x02;
- outb(ALI_REG(codec,ALI_SCTRL),bVal);
- udelay(5000);
- bVal = inb(ALI_REG(codec,ALI_SCTRL));
- bVal &= 0xfd;
- outb(ALI_REG(codec,ALI_SCTRL),bVal);
- udelay(15000);
-
- wCount = 200;
- while (wCount--) {
- wReg = snd_ali_codec_read(codec->ac97, AC97_POWERDOWN);
- if ((wReg & 0x000f) == 0x000f)
- return 0;
- udelay(5000);
- }
- return -1;
-}
-
-#endif
-
/*
* ALI 5451 Controller
*/
@@ -555,22 +522,6 @@
outl(gc, ALI_REG(codec, ALI_GC_CIR));
}
-#if 0 /* not used */
-static void snd_ali_enable_voice_irq(struct snd_ali *codec,
- unsigned int channel)
-{
- unsigned int mask;
- struct snd_ali_channel_control *pchregs = &(codec->chregs);
-
- snd_ali_printk("enable_voice_irq channel=%d\n",channel);
-
- mask = 1 << (channel & 0x1f);
- pchregs->data.ainten = inl(ALI_REG(codec, pchregs->regs.ainten));
- pchregs->data.ainten |= mask;
- outl(pchregs->data.ainten, ALI_REG(codec, pchregs->regs.ainten));
-}
-#endif
-
static void snd_ali_disable_voice_irq(struct snd_ali *codec,
unsigned int channel)
{
@@ -671,16 +622,6 @@
}
}
-#if 0 /* not used */
-static void snd_ali_start_voice(struct snd_ali *codec, unsigned int channel)
-{
- unsigned int mask = 1 << (channel & 0x1f);
-
- snd_ali_printk("start_voice: channel=%d\n",channel);
- outl(mask, ALI_REG(codec,codec->chregs.regs.start));
-}
-#endif
-
static void snd_ali_stop_voice(struct snd_ali *codec, unsigned int channel)
{
unsigned int mask = 1 << (channel & 0x1f);
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index f290bc5..8451a01 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1,6 +1,6 @@
/*
* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
- * Copyright (C) 2002, 2005 - 2008 by Andreas Mohr <andi AT lisas.de>
+ * Copyright (C) 2002, 2005 - 2009 by Andreas Mohr <andi AT lisas.de>
*
* Framework borrowed from Bart Hartgers's als4000.c.
* Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
@@ -10,6 +10,13 @@
* PCI168 A/AP, sub ID 8000
* Please give me feedback in case you try my driver with one of these!!
*
+ * Keywords: Windows XP Vista 168nt4-125.zip 168win95-125.zip PCI 168 download
+ * (XP/Vista do not support this card at all but every Linux distribution
+ * has very good support out of the box;
+ * just to make sure that the right people hit this and get to know that,
+ * despite the high level of Internet ignorance - as usual :-P -
+ * about very good support for this card - on Linux!)
+ *
* GPL LICENSE
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -71,10 +78,11 @@
* - built-in General DirectX timer having a 20 bits counter
* with 1us resolution (see below!)
* - I2S serial output port for external DAC
+ * [FIXME: 3.3V or 5V level? maximum rate is 66.2kHz right?]
* - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI
* - supports hardware volume control
* - single chip low cost solution (128 pin QFP)
- * - supports programmable Sub-vendor and Sub-system ID
+ * - supports programmable Sub-vendor and Sub-system ID [24C02 SEEPROM chip]
* required for Microsoft's logo compliance (FIXME: where?)
* At least the Trident 4D Wave DX has one bit somewhere
* to enable writes to PCI subsystem VID registers, that should be it.
@@ -82,6 +90,7 @@
* some custom data starting at 0x80. What kind of config settings
* are located in our extended PCI space anyway??
* - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms
+ * [TDA1517P chip]
*
* Note that this driver now is actually *better* than the Windows driver,
* since it additionally supports the card's 1MHz DirectX timer - just try
@@ -146,10 +155,15 @@
* to read the Digital Enhanced Game Port. Not sure whether it is fixable.
*
* TODO
+ * - use PCI_VDEVICE
+ * - verify driver status on x86_64
+ * - test multi-card driver operation
+ * - (ab)use 1MHz DirectX timer as kernel clocksource
* - test MPU401 MIDI playback etc.
* - add more power micro-management (disable various units of the card
- * as long as they're unused). However this requires more I/O ports which I
- * haven't figured out yet and which thus might not even exist...
+ * as long as they're unused, to improve audio quality and save power).
+ * However this requires more I/O ports which I haven't figured out yet
+ * and which thus might not even exist...
* The standard suspend/resume functionality could probably make use of
* some improvement, too...
* - figure out what all unknown port bits are responsible for
@@ -185,25 +199,46 @@
#define SUPPORT_GAMEPORT 1
#endif
+/* === Debug settings ===
+ Further diagnostic functionality than the settings below
+ does not need to be provided, since one can easily write a bash script
+ to dump the card's I/O ports (those listed in lspci -v -v):
+ function dump()
+ {
+ local descr=$1; local addr=$2; local count=$3
+
+ echo "${descr}: ${count} @ ${addr}:"
+ dd if=/dev/port skip=$[${addr}] count=${count} bs=1 2>/dev/null| hexdump -C
+ }
+ and then use something like
+ "dump joy200 0x200 8", "dump mpu388 0x388 4", "dump joy 0xb400 8",
+ "dump codec00 0xa800 32", "dump mixer 0xb800 64", "dump synth 0xbc00 8",
+ possibly within a "while true; do ... sleep 1; done" loop.
+ Tweaking ports could be done using
+ VALSTRING="`printf "%02x" $value`"
+ printf "\x""$VALSTRING"|dd of=/dev/port seek=$[${addr}] bs=1 2>/dev/null
+*/
+
#define DEBUG_MISC 0
#define DEBUG_CALLS 0
#define DEBUG_MIXER 0
-#define DEBUG_PLAY_REC 0
+#define DEBUG_CODEC 0
#define DEBUG_IO 0
#define DEBUG_TIMER 0
#define DEBUG_GAME 0
+#define DEBUG_PM 0
#define MIXER_TESTING 0
#if DEBUG_MISC
-#define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args)
+#define snd_azf3328_dbgmisc(format, args...) printk(KERN_DEBUG format, ##args)
#else
#define snd_azf3328_dbgmisc(format, args...)
#endif
#if DEBUG_CALLS
#define snd_azf3328_dbgcalls(format, args...) printk(format, ##args)
-#define snd_azf3328_dbgcallenter() printk(KERN_ERR "--> %s\n", __func__)
-#define snd_azf3328_dbgcallleave() printk(KERN_ERR "<-- %s\n", __func__)
+#define snd_azf3328_dbgcallenter() printk(KERN_DEBUG "--> %s\n", __func__)
+#define snd_azf3328_dbgcallleave() printk(KERN_DEBUG "<-- %s\n", __func__)
#else
#define snd_azf3328_dbgcalls(format, args...)
#define snd_azf3328_dbgcallenter()
@@ -216,10 +251,10 @@
#define snd_azf3328_dbgmixer(format, args...)
#endif
-#if DEBUG_PLAY_REC
-#define snd_azf3328_dbgplay(format, args...) printk(KERN_DEBUG format, ##args)
+#if DEBUG_CODEC
+#define snd_azf3328_dbgcodec(format, args...) printk(KERN_DEBUG format, ##args)
#else
-#define snd_azf3328_dbgplay(format, args...)
+#define snd_azf3328_dbgcodec(format, args...)
#endif
#if DEBUG_MISC
@@ -234,6 +269,12 @@
#define snd_azf3328_dbggame(format, args...)
#endif
+#if DEBUG_PM
+#define snd_azf3328_dbgpm(format, args...) printk(KERN_DEBUG format, ##args)
+#else
+#define snd_azf3328_dbgpm(format, args...)
+#endif
+
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for AZF3328 soundcard.");
@@ -250,22 +291,23 @@
module_param(seqtimer_scaling, int, 0444);
MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128.");
-struct snd_azf3328_audio_stream {
+struct snd_azf3328_codec_data {
+ unsigned long io_base;
struct snd_pcm_substream *substream;
- int enabled;
- int running;
- unsigned long portbase;
+ bool running;
+ const char *name;
};
-enum snd_azf3328_stream_index {
- AZF_PLAYBACK = 0,
- AZF_CAPTURE = 1,
+enum snd_azf3328_codec_type {
+ AZF_CODEC_PLAYBACK = 0,
+ AZF_CODEC_CAPTURE = 1,
+ AZF_CODEC_I2S_OUT = 2,
};
struct snd_azf3328 {
/* often-used fields towards beginning, then grouped */
- unsigned long codec_io; /* usually 0xb000, size 128 */
+ unsigned long ctrl_io; /* usually 0xb000, size 128 */
unsigned long game_io; /* usually 0xb400, size 8 */
unsigned long mpu_io; /* usually 0xb800, size 4 */
unsigned long opl3_io; /* usually 0xbc00, size 8 */
@@ -275,15 +317,17 @@
struct snd_timer *timer;
- struct snd_pcm *pcm;
- struct snd_azf3328_audio_stream audio_stream[2];
+ struct snd_pcm *pcm[3];
+
+ /* playback, recording and I2S out codecs */
+ struct snd_azf3328_codec_data codecs[3];
struct snd_card *card;
struct snd_rawmidi *rmidi;
#ifdef SUPPORT_GAMEPORT
struct gameport *gameport;
- int axes[4];
+ u16 axes[4];
#endif
struct pci_dev *pci;
@@ -293,16 +337,16 @@
* If we need to add more registers here, then we might try to fold this
* into some transparent combined shadow register handling with
* CONFIG_PM register storage below, but that's slightly difficult. */
- u16 shadow_reg_codec_6AH;
+ u16 shadow_reg_ctrl_6AH;
#ifdef CONFIG_PM
/* register value containers for power management
- * Note: not always full I/O range preserved (just like Win driver!) */
- u16 saved_regs_codec[AZF_IO_SIZE_CODEC_PM / 2];
- u16 saved_regs_game [AZF_IO_SIZE_GAME_PM / 2];
- u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2];
- u16 saved_regs_opl3 [AZF_IO_SIZE_OPL3_PM / 2];
- u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2];
+ * Note: not always full I/O range preserved (similar to Win driver!) */
+ u32 saved_regs_ctrl[AZF_ALIGN(AZF_IO_SIZE_CTRL_PM) / 4];
+ u32 saved_regs_game[AZF_ALIGN(AZF_IO_SIZE_GAME_PM) / 4];
+ u32 saved_regs_mpu[AZF_ALIGN(AZF_IO_SIZE_MPU_PM) / 4];
+ u32 saved_regs_opl3[AZF_ALIGN(AZF_IO_SIZE_OPL3_PM) / 4];
+ u32 saved_regs_mixer[AZF_ALIGN(AZF_IO_SIZE_MIXER_PM) / 4];
#endif
};
@@ -316,7 +360,7 @@
static int
-snd_azf3328_io_reg_setb(unsigned reg, u8 mask, int do_set)
+snd_azf3328_io_reg_setb(unsigned reg, u8 mask, bool do_set)
{
u8 prev = inb(reg), new;
@@ -331,39 +375,72 @@
}
static inline void
-snd_azf3328_codec_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value)
+snd_azf3328_codec_outb(const struct snd_azf3328_codec_data *codec,
+ unsigned reg,
+ u8 value
+)
{
- outb(value, chip->codec_io + reg);
+ outb(value, codec->io_base + reg);
}
static inline u8
-snd_azf3328_codec_inb(const struct snd_azf3328 *chip, unsigned reg)
+snd_azf3328_codec_inb(const struct snd_azf3328_codec_data *codec, unsigned reg)
{
- return inb(chip->codec_io + reg);
+ return inb(codec->io_base + reg);
}
static inline void
-snd_azf3328_codec_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
+snd_azf3328_codec_outw(const struct snd_azf3328_codec_data *codec,
+ unsigned reg,
+ u16 value
+)
{
- outw(value, chip->codec_io + reg);
+ outw(value, codec->io_base + reg);
}
static inline u16
-snd_azf3328_codec_inw(const struct snd_azf3328 *chip, unsigned reg)
+snd_azf3328_codec_inw(const struct snd_azf3328_codec_data *codec, unsigned reg)
{
- return inw(chip->codec_io + reg);
+ return inw(codec->io_base + reg);
}
static inline void
-snd_azf3328_codec_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value)
+snd_azf3328_codec_outl(const struct snd_azf3328_codec_data *codec,
+ unsigned reg,
+ u32 value
+)
{
- outl(value, chip->codec_io + reg);
+ outl(value, codec->io_base + reg);
}
static inline u32
-snd_azf3328_codec_inl(const struct snd_azf3328 *chip, unsigned reg)
+snd_azf3328_codec_inl(const struct snd_azf3328_codec_data *codec, unsigned reg)
{
- return inl(chip->codec_io + reg);
+ return inl(codec->io_base + reg);
+}
+
+static inline void
+snd_azf3328_ctrl_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value)
+{
+ outb(value, chip->ctrl_io + reg);
+}
+
+static inline u8
+snd_azf3328_ctrl_inb(const struct snd_azf3328 *chip, unsigned reg)
+{
+ return inb(chip->ctrl_io + reg);
+}
+
+static inline void
+snd_azf3328_ctrl_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value)
+{
+ outw(value, chip->ctrl_io + reg);
+}
+
+static inline void
+snd_azf3328_ctrl_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value)
+{
+ outl(value, chip->ctrl_io + reg);
}
static inline void
@@ -404,13 +481,13 @@
#define AZF_MUTE_BIT 0x80
-static int
+static bool
snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip,
- unsigned reg, int do_mute
+ unsigned reg, bool do_mute
)
{
unsigned long portbase = chip->mixer_io + reg + 1;
- int updated;
+ bool updated;
/* the mute bit is on the *second* (i.e. right) register of a
* left/right channel setting */
@@ -569,7 +646,7 @@
{
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
struct azf3328_mixer_reg reg;
- unsigned int oreg, val;
+ u16 oreg, val;
snd_azf3328_dbgcallenter();
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
@@ -600,7 +677,7 @@
{
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
struct azf3328_mixer_reg reg;
- unsigned int oreg, nreg, val;
+ u16 oreg, nreg, val;
snd_azf3328_dbgcallenter();
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
@@ -709,7 +786,7 @@
{
struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol);
struct azf3328_mixer_reg reg;
- unsigned int oreg, nreg, val;
+ u16 oreg, nreg, val;
snd_azf3328_mixer_reg_decode(®, kcontrol->private_value);
oreg = snd_azf3328_mixer_inw(chip, reg.reg);
@@ -867,14 +944,15 @@
static void
snd_azf3328_codec_setfmt(struct snd_azf3328 *chip,
- unsigned reg,
+ enum snd_azf3328_codec_type codec_type,
enum azf_freq_t bitrate,
unsigned int format_width,
unsigned int channels
)
{
- u16 val = 0xff00;
unsigned long flags;
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
+ u16 val = 0xff00;
snd_azf3328_dbgcallenter();
switch (bitrate) {
@@ -917,7 +995,7 @@
spin_lock_irqsave(&chip->reg_lock, flags);
/* set bitrate/format */
- snd_azf3328_codec_outw(chip, reg, val);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_SOUNDFORMAT, val);
/* changing the bitrate/format settings switches off the
* audio output with an annoying click in case of 8/16bit format change
@@ -926,11 +1004,11 @@
* (FIXME: yes, it works, but what exactly am I doing here?? :)
* FIXME: does this have some side effects for full-duplex
* or other dramatic side effects? */
- if (reg == IDX_IO_PLAY_SOUNDFORMAT) /* only do it for playback */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) |
- DMA_PLAY_SOMETHING1 |
- DMA_PLAY_SOMETHING2 |
+ if (codec_type == AZF_CODEC_PLAYBACK) /* only do it for playback */
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS) |
+ DMA_RUN_SOMETHING1 |
+ DMA_RUN_SOMETHING2 |
SOMETHING_ALMOST_ALWAYS_SET |
DMA_EPILOGUE_SOMETHING |
DMA_SOMETHING_ELSE
@@ -942,112 +1020,134 @@
static inline void
snd_azf3328_codec_setfmt_lowpower(struct snd_azf3328 *chip,
- unsigned reg
+ enum snd_azf3328_codec_type codec_type
)
{
/* choose lowest frequency for low power consumption.
* While this will cause louder noise due to rather coarse frequency,
* it should never matter since output should always
* get disabled properly when idle anyway. */
- snd_azf3328_codec_setfmt(chip, reg, AZF_FREQ_4000, 8, 1);
+ snd_azf3328_codec_setfmt(chip, codec_type, AZF_FREQ_4000, 8, 1);
}
static void
-snd_azf3328_codec_reg_6AH_update(struct snd_azf3328 *chip,
+snd_azf3328_ctrl_reg_6AH_update(struct snd_azf3328 *chip,
unsigned bitmask,
- int enable
+ bool enable
)
{
- if (enable)
- chip->shadow_reg_codec_6AH &= ~bitmask;
+ bool do_mask = !enable;
+ if (do_mask)
+ chip->shadow_reg_ctrl_6AH |= bitmask;
else
- chip->shadow_reg_codec_6AH |= bitmask;
- snd_azf3328_dbgplay("6AH_update mask 0x%04x enable %d: val 0x%04x\n",
- bitmask, enable, chip->shadow_reg_codec_6AH);
- snd_azf3328_codec_outw(chip, IDX_IO_6AH, chip->shadow_reg_codec_6AH);
+ chip->shadow_reg_ctrl_6AH &= ~bitmask;
+ snd_azf3328_dbgcodec("6AH_update mask 0x%04x do_mask %d: val 0x%04x\n",
+ bitmask, do_mask, chip->shadow_reg_ctrl_6AH);
+ snd_azf3328_ctrl_outw(chip, IDX_IO_6AH, chip->shadow_reg_ctrl_6AH);
}
static inline void
-snd_azf3328_codec_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_ctrl_enable_codecs(struct snd_azf3328 *chip, bool enable)
{
- snd_azf3328_dbgplay("codec_enable %d\n", enable);
+ snd_azf3328_dbgcodec("codec_enable %d\n", enable);
/* no idea what exactly is being done here, but I strongly assume it's
* PM related */
- snd_azf3328_codec_reg_6AH_update(
+ snd_azf3328_ctrl_reg_6AH_update(
chip, IO_6A_PAUSE_PLAYBACK_BIT8, enable
);
}
static void
-snd_azf3328_codec_activity(struct snd_azf3328 *chip,
- enum snd_azf3328_stream_index stream_type,
- int enable
+snd_azf3328_ctrl_codec_activity(struct snd_azf3328 *chip,
+ enum snd_azf3328_codec_type codec_type,
+ bool enable
)
{
- int need_change = (chip->audio_stream[stream_type].running != enable);
+ struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
+ bool need_change = (codec->running != enable);
- snd_azf3328_dbgplay(
- "codec_activity: type %d, enable %d, need_change %d\n",
- stream_type, enable, need_change
+ snd_azf3328_dbgcodec(
+ "codec_activity: %s codec, enable %d, need_change %d\n",
+ codec->name, enable, need_change
);
if (need_change) {
- enum snd_azf3328_stream_index other =
- (stream_type == AZF_PLAYBACK) ?
- AZF_CAPTURE : AZF_PLAYBACK;
- /* small check to prevent shutting down the other party
- * in case it's active */
- if ((enable) || !(chip->audio_stream[other].running))
- snd_azf3328_codec_enable(chip, enable);
+ static const struct {
+ enum snd_azf3328_codec_type other1;
+ enum snd_azf3328_codec_type other2;
+ } peer_codecs[3] =
+ { { AZF_CODEC_CAPTURE, AZF_CODEC_I2S_OUT },
+ { AZF_CODEC_PLAYBACK, AZF_CODEC_I2S_OUT },
+ { AZF_CODEC_PLAYBACK, AZF_CODEC_CAPTURE } };
+ bool call_function;
+
+ if (enable)
+ /* if enable codec, call enable_codecs func
+ to enable codec supply... */
+ call_function = 1;
+ else {
+ /* ...otherwise call enable_codecs func
+ (which globally shuts down operation of codecs)
+ only in case the other codecs are currently
+ not active either! */
+ call_function =
+ ((!chip->codecs[peer_codecs[codec_type].other1]
+ .running)
+ && (!chip->codecs[peer_codecs[codec_type].other2]
+ .running));
+ }
+ if (call_function)
+ snd_azf3328_ctrl_enable_codecs(chip, enable);
/* ...and adjust clock, too
* (reduce noise and power consumption) */
if (!enable)
snd_azf3328_codec_setfmt_lowpower(
chip,
- chip->audio_stream[stream_type].portbase
- + IDX_IO_PLAY_SOUNDFORMAT
+ codec_type
);
+ codec->running = enable;
}
- chip->audio_stream[stream_type].running = enable;
}
static void
-snd_azf3328_setdmaa(struct snd_azf3328 *chip,
- long unsigned int addr,
- unsigned int count,
- unsigned int size,
- enum snd_azf3328_stream_index stream_type
+snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip,
+ enum snd_azf3328_codec_type codec_type,
+ unsigned long addr,
+ unsigned int count,
+ unsigned int size
)
{
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
snd_azf3328_dbgcallenter();
- if (!chip->audio_stream[stream_type].running) {
- /* AZF3328 uses a two buffer pointer DMA playback approach */
+ if (!codec->running) {
+ /* AZF3328 uses a two buffer pointer DMA transfer approach */
- unsigned long flags, portbase, addr_area2;
+ unsigned long flags, addr_area2;
/* width 32bit (prevent overflow): */
- unsigned long count_areas, count_tmp;
+ u32 count_areas, lengths;
- portbase = chip->audio_stream[stream_type].portbase;
count_areas = size/2;
addr_area2 = addr+count_areas;
count_areas--; /* max. index */
- snd_azf3328_dbgplay("set DMA: buf1 %08lx[%lu], buf2 %08lx[%lu]\n", addr, count_areas, addr_area2, count_areas);
+ snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n",
+ addr, count_areas, addr_area2, count_areas);
/* build combined I/O buffer length word */
- count_tmp = count_areas;
- count_areas |= (count_tmp << 16);
+ lengths = (count_areas << 16) | (count_areas);
spin_lock_irqsave(&chip->reg_lock, flags);
- outl(addr, portbase + IDX_IO_PLAY_DMA_START_1);
- outl(addr_area2, portbase + IDX_IO_PLAY_DMA_START_2);
- outl(count_areas, portbase + IDX_IO_PLAY_DMA_LEN_1);
+ snd_azf3328_codec_outl(codec, IDX_IO_CODEC_DMA_START_1, addr);
+ snd_azf3328_codec_outl(codec, IDX_IO_CODEC_DMA_START_2,
+ addr_area2);
+ snd_azf3328_codec_outl(codec, IDX_IO_CODEC_DMA_LENGTHS,
+ lengths);
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
snd_azf3328_dbgcallleave();
}
static int
-snd_azf3328_playback_prepare(struct snd_pcm_substream *substream)
+snd_azf3328_codec_prepare(struct snd_pcm_substream *substream)
{
#if 0
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
@@ -1058,157 +1158,161 @@
snd_azf3328_dbgcallenter();
#if 0
- snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
+ snd_azf3328_codec_setfmt(chip, AZF_CODEC_...,
runtime->rate,
snd_pcm_format_width(runtime->format),
runtime->channels);
- snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_PLAYBACK);
+ snd_azf3328_codec_setdmaa(chip, AZF_CODEC_...,
+ runtime->dma_addr, count, size);
#endif
snd_azf3328_dbgcallleave();
return 0;
}
static int
-snd_azf3328_capture_prepare(struct snd_pcm_substream *substream)
-{
-#if 0
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- unsigned int size = snd_pcm_lib_buffer_bytes(substream);
- unsigned int count = snd_pcm_lib_period_bytes(substream);
-#endif
-
- snd_azf3328_dbgcallenter();
-#if 0
- snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
- runtime->rate,
- snd_pcm_format_width(runtime->format),
- runtime->channels);
- snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_CAPTURE);
-#endif
- snd_azf3328_dbgcallleave();
- return 0;
-}
-
-static int
-snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+snd_azf3328_codec_trigger(enum snd_azf3328_codec_type codec_type,
+ struct snd_pcm_substream *substream, int cmd)
{
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
struct snd_pcm_runtime *runtime = substream->runtime;
int result = 0;
- unsigned int status1;
- int previously_muted;
+ u16 flags1;
+ bool previously_muted = 0;
+ bool is_playback_codec = (AZF_CODEC_PLAYBACK == codec_type);
- snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd);
+ snd_azf3328_dbgcalls("snd_azf3328_codec_trigger cmd %d\n", cmd);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- snd_azf3328_dbgplay("START PLAYBACK\n");
+ snd_azf3328_dbgcodec("START %s\n", codec->name);
- /* mute WaveOut (avoid clicking during setup) */
- previously_muted =
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
+ if (is_playback_codec) {
+ /* mute WaveOut (avoid clicking during setup) */
+ previously_muted =
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 1
+ );
+ }
- snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT,
+ snd_azf3328_codec_setfmt(chip, codec_type,
runtime->rate,
snd_pcm_format_width(runtime->format),
runtime->channels);
spin_lock(&chip->reg_lock);
/* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
+ flags1 = snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS);
- /* stop playback */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ /* stop transfer */
+ flags1 &= ~DMA_RESUME;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
/* FIXME: clear interrupts or what??? */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_IRQTYPE, 0xffff);
spin_unlock(&chip->reg_lock);
- snd_azf3328_setdmaa(chip, runtime->dma_addr,
+ snd_azf3328_codec_setdmaa(chip, codec_type, runtime->dma_addr,
snd_pcm_lib_period_bytes(substream),
- snd_pcm_lib_buffer_bytes(substream),
- AZF_PLAYBACK);
+ snd_pcm_lib_buffer_bytes(substream)
+ );
spin_lock(&chip->reg_lock);
#ifdef WIN9X
/* FIXME: enable playback/recording??? */
- status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 |= DMA_RUN_SOMETHING1 | DMA_RUN_SOMETHING2;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
- /* start playback again */
+ /* start transfer again */
/* FIXME: what is this value (0x0010)??? */
- status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
#else /* NT4 */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
0x0000);
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- DMA_PLAY_SOMETHING1);
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- DMA_PLAY_SOMETHING1 |
- DMA_PLAY_SOMETHING2);
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ DMA_RUN_SOMETHING1);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ DMA_RUN_SOMETHING1 |
+ DMA_RUN_SOMETHING2);
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
DMA_RESUME |
SOMETHING_ALMOST_ALWAYS_SET |
DMA_EPILOGUE_SOMETHING |
DMA_SOMETHING_ELSE);
#endif
spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 1);
+ snd_azf3328_ctrl_codec_activity(chip, codec_type, 1);
- /* now unmute WaveOut */
- if (!previously_muted)
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
+ if (is_playback_codec) {
+ /* now unmute WaveOut */
+ if (!previously_muted)
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 0
+ );
+ }
- snd_azf3328_dbgplay("STARTED PLAYBACK\n");
+ snd_azf3328_dbgcodec("STARTED %s\n", codec->name);
break;
case SNDRV_PCM_TRIGGER_RESUME:
- snd_azf3328_dbgplay("RESUME PLAYBACK\n");
- /* resume playback if we were active */
+ snd_azf3328_dbgcodec("RESUME %s\n", codec->name);
+ /* resume codec if we were active */
spin_lock(&chip->reg_lock);
- if (chip->audio_stream[AZF_PLAYBACK].running)
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME);
+ if (codec->running)
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ snd_azf3328_codec_inw(
+ codec, IDX_IO_CODEC_DMA_FLAGS
+ ) | DMA_RESUME
+ );
spin_unlock(&chip->reg_lock);
break;
case SNDRV_PCM_TRIGGER_STOP:
- snd_azf3328_dbgplay("STOP PLAYBACK\n");
+ snd_azf3328_dbgcodec("STOP %s\n", codec->name);
- /* mute WaveOut (avoid clicking during setup) */
- previously_muted =
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
+ if (is_playback_codec) {
+ /* mute WaveOut (avoid clicking during setup) */
+ previously_muted =
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 1
+ );
+ }
spin_lock(&chip->reg_lock);
/* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS);
+ flags1 = snd_azf3328_codec_inw(codec, IDX_IO_CODEC_DMA_FLAGS);
- /* stop playback */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ /* stop transfer */
+ flags1 &= ~DMA_RESUME;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
/* hmm, is this really required? we're resetting the same bit
* immediately thereafter... */
- status1 |= DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 |= DMA_RUN_SOMETHING1;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
- status1 &= ~DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1);
+ flags1 &= ~DMA_RUN_SOMETHING1;
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS, flags1);
spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0);
+ snd_azf3328_ctrl_codec_activity(chip, codec_type, 0);
- /* now unmute WaveOut */
- if (!previously_muted)
- snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0);
+ if (is_playback_codec) {
+ /* now unmute WaveOut */
+ if (!previously_muted)
+ snd_azf3328_mixer_set_mute(
+ chip, IDX_MIXER_WAVEOUT, 0
+ );
+ }
- snd_azf3328_dbgplay("STOPPED PLAYBACK\n");
+ snd_azf3328_dbgcodec("STOPPED %s\n", codec->name);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
- snd_azf3328_dbgplay("SUSPEND PLAYBACK\n");
- /* make sure playback is stopped */
- snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) & ~DMA_RESUME);
+ snd_azf3328_dbgcodec("SUSPEND %s\n", codec->name);
+ /* make sure codec is stopped */
+ snd_azf3328_codec_outw(codec, IDX_IO_CODEC_DMA_FLAGS,
+ snd_azf3328_codec_inw(
+ codec, IDX_IO_CODEC_DMA_FLAGS
+ ) & ~DMA_RESUME
+ );
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
@@ -1217,7 +1321,7 @@
snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
break;
default:
- printk(KERN_ERR "FIXME: unknown trigger mode!\n");
+ snd_printk(KERN_ERR "FIXME: unknown trigger mode!\n");
return -EINVAL;
}
@@ -1225,172 +1329,74 @@
return result;
}
-/* this is just analogous to playback; I'm not quite sure whether recording
- * should actually be triggered like that */
static int
-snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+snd_azf3328_codec_playback_trigger(struct snd_pcm_substream *substream, int cmd)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
- int result = 0;
- unsigned int status1;
+ return snd_azf3328_codec_trigger(AZF_CODEC_PLAYBACK, substream, cmd);
+}
- snd_azf3328_dbgcalls("snd_azf3328_capture_trigger cmd %d\n", cmd);
+static int
+snd_azf3328_codec_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ return snd_azf3328_codec_trigger(AZF_CODEC_CAPTURE, substream, cmd);
+}
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
-
- snd_azf3328_dbgplay("START CAPTURE\n");
-
- snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT,
- runtime->rate,
- snd_pcm_format_width(runtime->format),
- runtime->channels);
-
- spin_lock(&chip->reg_lock);
- /* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
-
- /* stop recording */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- /* FIXME: clear interrupts or what??? */
- snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff);
- spin_unlock(&chip->reg_lock);
-
- snd_azf3328_setdmaa(chip, runtime->dma_addr,
- snd_pcm_lib_period_bytes(substream),
- snd_pcm_lib_buffer_bytes(substream),
- AZF_CAPTURE);
-
- spin_lock(&chip->reg_lock);
-#ifdef WIN9X
- /* FIXME: enable playback/recording??? */
- status1 |= DMA_PLAY_SOMETHING1 | DMA_PLAY_SOMETHING2;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- /* start capture again */
- /* FIXME: what is this value (0x0010)??? */
- status1 |= DMA_RESUME | DMA_EPILOGUE_SOMETHING;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-#else
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- 0x0000);
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- DMA_PLAY_SOMETHING1);
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- DMA_PLAY_SOMETHING1 |
- DMA_PLAY_SOMETHING2);
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- DMA_RESUME |
- SOMETHING_ALMOST_ALWAYS_SET |
- DMA_EPILOGUE_SOMETHING |
- DMA_SOMETHING_ELSE);
-#endif
- spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_CAPTURE, 1);
-
- snd_azf3328_dbgplay("STARTED CAPTURE\n");
- break;
- case SNDRV_PCM_TRIGGER_RESUME:
- snd_azf3328_dbgplay("RESUME CAPTURE\n");
- /* resume recording if we were active */
- spin_lock(&chip->reg_lock);
- if (chip->audio_stream[AZF_CAPTURE].running)
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME);
- spin_unlock(&chip->reg_lock);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- snd_azf3328_dbgplay("STOP CAPTURE\n");
-
- spin_lock(&chip->reg_lock);
- /* first, remember current value: */
- status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS);
-
- /* stop recording */
- status1 &= ~DMA_RESUME;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- status1 |= DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
-
- status1 &= ~DMA_PLAY_SOMETHING1;
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1);
- spin_unlock(&chip->reg_lock);
- snd_azf3328_codec_activity(chip, AZF_CAPTURE, 0);
-
- snd_azf3328_dbgplay("STOPPED CAPTURE\n");
- break;
- case SNDRV_PCM_TRIGGER_SUSPEND:
- snd_azf3328_dbgplay("SUSPEND CAPTURE\n");
- /* make sure recording is stopped */
- snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS,
- snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) & ~DMA_RESUME);
- break;
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_PUSH NIY!\n");
- break;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- snd_printk(KERN_ERR "FIXME: SNDRV_PCM_TRIGGER_PAUSE_RELEASE NIY!\n");
- break;
- default:
- printk(KERN_ERR "FIXME: unknown trigger mode!\n");
- return -EINVAL;
- }
-
- snd_azf3328_dbgcallleave();
- return result;
+static int
+snd_azf3328_codec_i2s_out_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ return snd_azf3328_codec_trigger(AZF_CODEC_I2S_OUT, substream, cmd);
}
static snd_pcm_uframes_t
-snd_azf3328_playback_pointer(struct snd_pcm_substream *substream)
+snd_azf3328_codec_pointer(struct snd_pcm_substream *substream,
+ enum snd_azf3328_codec_type codec_type
+)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ const struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ const struct snd_azf3328_codec_data *codec = &chip->codecs[codec_type];
unsigned long bufptr, result;
snd_pcm_uframes_t frmres;
#ifdef QUERY_HARDWARE
- bufptr = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_START_1);
+ bufptr = snd_azf3328_codec_inl(codec, IDX_IO_CODEC_DMA_START_1);
#else
bufptr = substream->runtime->dma_addr;
#endif
- result = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_CURRPOS);
+ result = snd_azf3328_codec_inl(codec, IDX_IO_CODEC_DMA_CURRPOS);
/* calculate offset */
result -= bufptr;
frmres = bytes_to_frames( substream->runtime, result);
- snd_azf3328_dbgplay("PLAY @ 0x%8lx, frames %8ld\n", result, frmres);
+ snd_azf3328_dbgcodec("%s @ 0x%8lx, frames %8ld\n",
+ codec->name, result, frmres);
return frmres;
}
static snd_pcm_uframes_t
-snd_azf3328_capture_pointer(struct snd_pcm_substream *substream)
+snd_azf3328_codec_playback_pointer(struct snd_pcm_substream *substream)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- unsigned long bufptr, result;
- snd_pcm_uframes_t frmres;
+ return snd_azf3328_codec_pointer(substream, AZF_CODEC_PLAYBACK);
+}
-#ifdef QUERY_HARDWARE
- bufptr = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_START_1);
-#else
- bufptr = substream->runtime->dma_addr;
-#endif
- result = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_CURRPOS);
+static snd_pcm_uframes_t
+snd_azf3328_codec_capture_pointer(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_codec_pointer(substream, AZF_CODEC_CAPTURE);
+}
- /* calculate offset */
- result -= bufptr;
- frmres = bytes_to_frames( substream->runtime, result);
- snd_azf3328_dbgplay("REC @ 0x%8lx, frames %8ld\n", result, frmres);
- return frmres;
+static snd_pcm_uframes_t
+snd_azf3328_codec_i2s_out_pointer(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_codec_pointer(substream, AZF_CODEC_I2S_OUT);
}
/******************************************************************/
#ifdef SUPPORT_GAMEPORT
static inline void
-snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip,
+ bool enable
+)
{
snd_azf3328_io_reg_setb(
chip->game_io+IDX_GAME_HWCONFIG,
@@ -1400,7 +1406,9 @@
}
static inline void
-snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip, int enable)
+snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip,
+ bool enable
+)
{
snd_azf3328_io_reg_setb(
chip->game_io+IDX_GAME_HWCONFIG,
@@ -1409,10 +1417,27 @@
);
}
-static inline void
-snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, int enable)
+static void
+snd_azf3328_gameport_set_counter_frequency(struct snd_azf3328 *chip,
+ unsigned int freq_cfg
+)
{
- snd_azf3328_codec_reg_6AH_update(
+ snd_azf3328_io_reg_setb(
+ chip->game_io+IDX_GAME_HWCONFIG,
+ 0x02,
+ (freq_cfg & 1) != 0
+ );
+ snd_azf3328_io_reg_setb(
+ chip->game_io+IDX_GAME_HWCONFIG,
+ 0x04,
+ (freq_cfg & 2) != 0
+ );
+}
+
+static inline void
+snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, bool enable)
+{
+ snd_azf3328_ctrl_reg_6AH_update(
chip, IO_6A_SOMETHING2_GAMEPORT, enable
);
}
@@ -1447,6 +1472,8 @@
break;
}
+ snd_azf3328_gameport_set_counter_frequency(chip,
+ GAME_HWCFG_ADC_COUNTER_FREQ_STD);
snd_azf3328_gameport_axis_circuit_enable(chip, (res == 0));
return res;
@@ -1458,6 +1485,8 @@
struct snd_azf3328 *chip = gameport_get_port_data(gameport);
snd_azf3328_dbggame("gameport_close\n");
+ snd_azf3328_gameport_set_counter_frequency(chip,
+ GAME_HWCFG_ADC_COUNTER_FREQ_1_200);
snd_azf3328_gameport_axis_circuit_enable(chip, 0);
}
@@ -1491,7 +1520,7 @@
val = snd_azf3328_game_inb(chip, IDX_GAME_AXES_CONFIG);
if (val & GAME_AXES_SAMPLING_READY) {
- for (i = 0; i < 4; ++i) {
+ for (i = 0; i < ARRAY_SIZE(chip->axes); ++i) {
/* configure the axis to read */
val = (i << 4) | 0x0f;
snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val);
@@ -1514,7 +1543,7 @@
snd_azf3328_game_outw(chip, IDX_GAME_AXIS_VALUE, 0xffff);
spin_unlock_irqrestore(&chip->reg_lock, flags);
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < ARRAY_SIZE(chip->axes); i++) {
axes[i] = chip->axes[i];
if (axes[i] == 0xffff)
axes[i] = -1;
@@ -1552,6 +1581,8 @@
/* DISABLE legacy address: we don't need it! */
snd_azf3328_gameport_legacy_address_enable(chip, 0);
+ snd_azf3328_gameport_set_counter_frequency(chip,
+ GAME_HWCFG_ADC_COUNTER_FREQ_1_200);
snd_azf3328_gameport_axis_circuit_enable(chip, 0);
gameport_register_port(chip->gameport);
@@ -1585,40 +1616,77 @@
static inline void
snd_azf3328_irq_log_unknown_type(u8 which)
{
- snd_azf3328_dbgplay(
+ snd_azf3328_dbgcodec(
"azt3328: unknown IRQ type (%x) occurred, please report!\n",
which
);
}
+static inline void
+snd_azf3328_codec_interrupt(struct snd_azf3328 *chip, u8 status)
+{
+ u8 which;
+ enum snd_azf3328_codec_type codec_type;
+ const struct snd_azf3328_codec_data *codec;
+
+ for (codec_type = AZF_CODEC_PLAYBACK;
+ codec_type <= AZF_CODEC_I2S_OUT;
+ ++codec_type) {
+
+ /* skip codec if there's no interrupt for it */
+ if (!(status & (1 << codec_type)))
+ continue;
+
+ codec = &chip->codecs[codec_type];
+
+ spin_lock(&chip->reg_lock);
+ which = snd_azf3328_codec_inb(codec, IDX_IO_CODEC_IRQTYPE);
+ /* ack all IRQ types immediately */
+ snd_azf3328_codec_outb(codec, IDX_IO_CODEC_IRQTYPE, which);
+ spin_unlock(&chip->reg_lock);
+
+ if ((chip->pcm[codec_type]) && (codec->substream)) {
+ snd_pcm_period_elapsed(codec->substream);
+ snd_azf3328_dbgcodec("%s period done (#%x), @ %x\n",
+ codec->name,
+ which,
+ snd_azf3328_codec_inl(
+ codec, IDX_IO_CODEC_DMA_CURRPOS
+ )
+ );
+ } else
+ printk(KERN_WARNING "azt3328: irq handler problem!\n");
+ if (which & IRQ_SOMETHING)
+ snd_azf3328_irq_log_unknown_type(which);
+ }
+}
+
static irqreturn_t
snd_azf3328_interrupt(int irq, void *dev_id)
{
struct snd_azf3328 *chip = dev_id;
- u8 status, which;
-#if DEBUG_PLAY_REC
+ u8 status;
+#if DEBUG_CODEC
static unsigned long irq_count;
#endif
- status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS);
+ status = snd_azf3328_ctrl_inb(chip, IDX_IO_IRQSTATUS);
/* fast path out, to ease interrupt sharing */
if (!(status &
- (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER)
+ (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_I2S_OUT
+ |IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER)
))
return IRQ_NONE; /* must be interrupt for another device */
- snd_azf3328_dbgplay(
- "irq_count %ld! IDX_IO_PLAY_FLAGS %04x, "
- "IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n",
+ snd_azf3328_dbgcodec(
+ "irq_count %ld! IDX_IO_IRQSTATUS %04x\n",
irq_count++ /* debug-only */,
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS),
- snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE),
status
);
if (status & IRQ_TIMER) {
- /* snd_azf3328_dbgplay("timer %ld\n",
+ /* snd_azf3328_dbgcodec("timer %ld\n",
snd_azf3328_codec_inl(chip, IDX_IO_TIMER_VALUE)
& TIMER_VALUE_MASK
); */
@@ -1626,71 +1694,36 @@
snd_timer_interrupt(chip->timer, chip->timer->sticks);
/* ACK timer */
spin_lock(&chip->reg_lock);
- snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07);
+ snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x07);
spin_unlock(&chip->reg_lock);
- snd_azf3328_dbgplay("azt3328: timer IRQ\n");
+ snd_azf3328_dbgcodec("azt3328: timer IRQ\n");
}
- if (status & IRQ_PLAYBACK) {
- spin_lock(&chip->reg_lock);
- which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE);
- /* ack all IRQ types immediately */
- snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which);
- spin_unlock(&chip->reg_lock);
- if (chip->pcm && chip->audio_stream[AZF_PLAYBACK].substream) {
- snd_pcm_period_elapsed(
- chip->audio_stream[AZF_PLAYBACK].substream
- );
- snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n",
- which,
- snd_azf3328_codec_inl(
- chip, IDX_IO_PLAY_DMA_CURRPOS
- )
- );
- } else
- printk(KERN_WARNING "azt3328: irq handler problem!\n");
- if (which & IRQ_PLAY_SOMETHING)
- snd_azf3328_irq_log_unknown_type(which);
- }
- if (status & IRQ_RECORDING) {
- spin_lock(&chip->reg_lock);
- which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE);
- /* ack all IRQ types immediately */
- snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which);
- spin_unlock(&chip->reg_lock);
+ if (status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_I2S_OUT))
+ snd_azf3328_codec_interrupt(chip, status);
- if (chip->pcm && chip->audio_stream[AZF_CAPTURE].substream) {
- snd_pcm_period_elapsed(
- chip->audio_stream[AZF_CAPTURE].substream
- );
- snd_azf3328_dbgplay("REC period done (#%x), @ %x\n",
- which,
- snd_azf3328_codec_inl(
- chip, IDX_IO_REC_DMA_CURRPOS
- )
- );
- } else
- printk(KERN_WARNING "azt3328: irq handler problem!\n");
- if (which & IRQ_REC_SOMETHING)
- snd_azf3328_irq_log_unknown_type(which);
- }
if (status & IRQ_GAMEPORT)
snd_azf3328_gameport_interrupt(chip);
+
/* MPU401 has less critical IRQ requirements
* than timer and playback/recording, right? */
if (status & IRQ_MPU401) {
snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data);
/* hmm, do we have to ack the IRQ here somehow?
- * If so, then I don't know how... */
- snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n");
+ * If so, then I don't know how yet... */
+ snd_azf3328_dbgcodec("azt3328: MPU401 IRQ\n");
}
return IRQ_HANDLED;
}
/*****************************************************************/
-static const struct snd_pcm_hardware snd_azf3328_playback =
+/* as long as we think we have identical snd_pcm_hardware parameters
+ for playback, capture and i2s out, we can use the same physical struct
+ since the struct is simply being copied into a member.
+*/
+static const struct snd_pcm_hardware snd_azf3328_hardware =
{
/* FIXME!! Correct? */
.info = SNDRV_PCM_INFO_MMAP |
@@ -1718,31 +1751,6 @@
.fifo_size = 0,
};
-static const struct snd_pcm_hardware snd_azf3328_capture =
-{
- /* FIXME */
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
- .formats = SNDRV_PCM_FMTBIT_S8 |
- SNDRV_PCM_FMTBIT_U8 |
- SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_U16_LE,
- .rates = SNDRV_PCM_RATE_5512 |
- SNDRV_PCM_RATE_8000_48000 |
- SNDRV_PCM_RATE_KNOT,
- .rate_min = AZF_FREQ_4000,
- .rate_max = AZF_FREQ_66200,
- .channels_min = 1,
- .channels_max = 2,
- .buffer_bytes_max = 65536,
- .period_bytes_min = 64,
- .period_bytes_max = 65536,
- .periods_min = 1,
- .periods_max = 1024,
- .fifo_size = 0,
-};
-
static unsigned int snd_azf3328_fixed_rates[] = {
AZF_FREQ_4000,
@@ -1770,14 +1778,19 @@
/*****************************************************************/
static int
-snd_azf3328_playback_open(struct snd_pcm_substream *substream)
+snd_azf3328_pcm_open(struct snd_pcm_substream *substream,
+ enum snd_azf3328_codec_type codec_type
+)
{
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_PLAYBACK].substream = substream;
- runtime->hw = snd_azf3328_playback;
+ chip->codecs[codec_type].substream = substream;
+
+ /* same parameters for all our codecs - at least we think so... */
+ runtime->hw = snd_azf3328_hardware;
+
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&snd_azf3328_hw_constraints_rates);
snd_azf3328_dbgcallleave();
@@ -1785,16 +1798,32 @@
}
static int
+snd_azf3328_playback_open(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_open(substream, AZF_CODEC_PLAYBACK);
+}
+
+static int
snd_azf3328_capture_open(struct snd_pcm_substream *substream)
{
+ return snd_azf3328_pcm_open(substream, AZF_CODEC_CAPTURE);
+}
+
+static int
+snd_azf3328_i2s_out_open(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_open(substream, AZF_CODEC_I2S_OUT);
+}
+
+static int
+snd_azf3328_pcm_close(struct snd_pcm_substream *substream,
+ enum snd_azf3328_codec_type codec_type
+)
+{
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_CAPTURE].substream = substream;
- runtime->hw = snd_azf3328_capture;
- snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
- &snd_azf3328_hw_constraints_rates);
+ chip->codecs[codec_type].substream = NULL;
snd_azf3328_dbgcallleave();
return 0;
}
@@ -1802,23 +1831,19 @@
static int
snd_azf3328_playback_close(struct snd_pcm_substream *substream)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
-
- snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_PLAYBACK].substream = NULL;
- snd_azf3328_dbgcallleave();
- return 0;
+ return snd_azf3328_pcm_close(substream, AZF_CODEC_PLAYBACK);
}
static int
snd_azf3328_capture_close(struct snd_pcm_substream *substream)
{
- struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
+ return snd_azf3328_pcm_close(substream, AZF_CODEC_CAPTURE);
+}
- snd_azf3328_dbgcallenter();
- chip->audio_stream[AZF_CAPTURE].substream = NULL;
- snd_azf3328_dbgcallleave();
- return 0;
+static int
+snd_azf3328_i2s_out_close(struct snd_pcm_substream *substream)
+{
+ return snd_azf3328_pcm_close(substream, AZF_CODEC_I2S_OUT);
}
/******************************************************************/
@@ -1829,9 +1854,9 @@
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_azf3328_hw_params,
.hw_free = snd_azf3328_hw_free,
- .prepare = snd_azf3328_playback_prepare,
- .trigger = snd_azf3328_playback_trigger,
- .pointer = snd_azf3328_playback_pointer
+ .prepare = snd_azf3328_codec_prepare,
+ .trigger = snd_azf3328_codec_playback_trigger,
+ .pointer = snd_azf3328_codec_playback_pointer
};
static struct snd_pcm_ops snd_azf3328_capture_ops = {
@@ -1840,30 +1865,67 @@
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_azf3328_hw_params,
.hw_free = snd_azf3328_hw_free,
- .prepare = snd_azf3328_capture_prepare,
- .trigger = snd_azf3328_capture_trigger,
- .pointer = snd_azf3328_capture_pointer
+ .prepare = snd_azf3328_codec_prepare,
+ .trigger = snd_azf3328_codec_capture_trigger,
+ .pointer = snd_azf3328_codec_capture_pointer
+};
+
+static struct snd_pcm_ops snd_azf3328_i2s_out_ops = {
+ .open = snd_azf3328_i2s_out_open,
+ .close = snd_azf3328_i2s_out_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_azf3328_hw_params,
+ .hw_free = snd_azf3328_hw_free,
+ .prepare = snd_azf3328_codec_prepare,
+ .trigger = snd_azf3328_codec_i2s_out_trigger,
+ .pointer = snd_azf3328_codec_i2s_out_pointer
};
static int __devinit
-snd_azf3328_pcm(struct snd_azf3328 *chip, int device)
+snd_azf3328_pcm(struct snd_azf3328 *chip)
{
+enum { AZF_PCMDEV_STD, AZF_PCMDEV_I2S_OUT, NUM_AZF_PCMDEVS }; /* pcm devices */
+
struct snd_pcm *pcm;
int err;
snd_azf3328_dbgcallenter();
- if ((err = snd_pcm_new(chip->card, "AZF3328 DSP", device, 1, 1, &pcm)) < 0)
+
+ err = snd_pcm_new(chip->card, "AZF3328 DSP", AZF_PCMDEV_STD,
+ 1, 1, &pcm);
+ if (err < 0)
return err;
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_azf3328_playback_ops);
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_azf3328_capture_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_azf3328_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_azf3328_capture_ops);
pcm->private_data = chip;
pcm->info_flags = 0;
strcpy(pcm->name, chip->card->shortname);
- chip->pcm = pcm;
+ /* same pcm object for playback/capture (see snd_pcm_new() above) */
+ chip->pcm[AZF_CODEC_PLAYBACK] = pcm;
+ chip->pcm[AZF_CODEC_CAPTURE] = pcm;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
- snd_dma_pci_data(chip->pci), 64*1024, 64*1024);
+ snd_dma_pci_data(chip->pci),
+ 64*1024, 64*1024);
+
+ err = snd_pcm_new(chip->card, "AZF3328 I2S OUT", AZF_PCMDEV_I2S_OUT,
+ 1, 0, &pcm);
+ if (err < 0)
+ return err;
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_azf3328_i2s_out_ops);
+
+ pcm->private_data = chip;
+ pcm->info_flags = 0;
+ strcpy(pcm->name, chip->card->shortname);
+ chip->pcm[AZF_CODEC_I2S_OUT] = pcm;
+
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+ snd_dma_pci_data(chip->pci),
+ 64*1024, 64*1024);
snd_azf3328_dbgcallleave();
return 0;
@@ -1902,7 +1964,7 @@
snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay);
delay |= TIMER_COUNTDOWN_ENABLE | TIMER_IRQ_ENABLE;
spin_lock_irqsave(&chip->reg_lock, flags);
- snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay);
+ snd_azf3328_ctrl_outl(chip, IDX_IO_TIMER_VALUE, delay);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_azf3328_dbgcallleave();
return 0;
@@ -1919,7 +1981,7 @@
spin_lock_irqsave(&chip->reg_lock, flags);
/* disable timer countdown and interrupt */
/* FIXME: should we write TIMER_IRQ_ACK here? */
- snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
+ snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_azf3328_dbgcallleave();
return 0;
@@ -2035,7 +2097,7 @@
outb(val, reg);
- printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n",
+ printk(KERN_DEBUG "reg %04x bit %d: %02x %02x %02x\n",
reg, bit, val, valoff, valon
);
}
@@ -2048,9 +2110,9 @@
u16 tmp;
snd_azf3328_dbgmisc(
- "codec_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, "
+ "ctrl_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, "
"opl3_io 0x%lx, mixer_io 0x%lx, irq %d\n",
- chip->codec_io, chip->game_io, chip->mpu_io,
+ chip->ctrl_io, chip->game_io, chip->mpu_io,
chip->opl3_io, chip->mixer_io, chip->irq
);
@@ -2083,9 +2145,9 @@
inb(0x38c + tmp)
);
- for (tmp = 0; tmp < AZF_IO_SIZE_CODEC; tmp += 2)
- snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n",
- tmp, snd_azf3328_codec_inw(chip, tmp)
+ for (tmp = 0; tmp < AZF_IO_SIZE_CTRL; tmp += 2)
+ snd_azf3328_dbgmisc("ctrl 0x%02x: 0x%04x\n",
+ tmp, snd_azf3328_ctrl_inw(chip, tmp)
);
for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2)
@@ -2106,7 +2168,8 @@
static struct snd_device_ops ops = {
.dev_free = snd_azf3328_dev_free,
};
- u16 tmp;
+ u8 dma_init;
+ enum snd_azf3328_codec_type codec_type;
*rchip = NULL;
@@ -2138,14 +2201,21 @@
if (err < 0)
goto out_err;
- chip->codec_io = pci_resource_start(pci, 0);
+ chip->ctrl_io = pci_resource_start(pci, 0);
chip->game_io = pci_resource_start(pci, 1);
chip->mpu_io = pci_resource_start(pci, 2);
- chip->opl3_io = pci_resource_start(pci, 3);
+ chip->opl3_io = pci_resource_start(pci, 3);
chip->mixer_io = pci_resource_start(pci, 4);
- chip->audio_stream[AZF_PLAYBACK].portbase = chip->codec_io + 0x00;
- chip->audio_stream[AZF_CAPTURE].portbase = chip->codec_io + 0x20;
+ chip->codecs[AZF_CODEC_PLAYBACK].io_base =
+ chip->ctrl_io + AZF_IO_OFFS_CODEC_PLAYBACK;
+ chip->codecs[AZF_CODEC_PLAYBACK].name = "PLAYBACK";
+ chip->codecs[AZF_CODEC_CAPTURE].io_base =
+ chip->ctrl_io + AZF_IO_OFFS_CODEC_CAPTURE;
+ chip->codecs[AZF_CODEC_CAPTURE].name = "CAPTURE";
+ chip->codecs[AZF_CODEC_I2S_OUT].io_base =
+ chip->ctrl_io + AZF_IO_OFFS_CODEC_I2S_OUT;
+ chip->codecs[AZF_CODEC_I2S_OUT].name = "I2S_OUT";
if (request_irq(pci->irq, snd_azf3328_interrupt,
IRQF_SHARED, card->shortname, chip)) {
@@ -2168,20 +2238,25 @@
if (err < 0)
goto out_err;
- /* shutdown codecs to save power */
- /* have snd_azf3328_codec_activity() act properly */
- chip->audio_stream[AZF_PLAYBACK].running = 1;
- snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0);
+ /* standard codec init stuff */
+ /* default DMA init value */
+ dma_init = DMA_RUN_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE;
- /* standard chip init stuff */
- /* default IRQ init value */
- tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE;
+ for (codec_type = AZF_CODEC_PLAYBACK;
+ codec_type <= AZF_CODEC_I2S_OUT; ++codec_type) {
+ struct snd_azf3328_codec_data *codec =
+ &chip->codecs[codec_type];
- spin_lock_irq(&chip->reg_lock);
- snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp);
- snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp);
- snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp);
- spin_unlock_irq(&chip->reg_lock);
+ /* shutdown codecs to save power */
+ /* have ...ctrl_codec_activity() act properly */
+ codec->running = 1;
+ snd_azf3328_ctrl_codec_activity(chip, codec_type, 0);
+
+ spin_lock_irq(&chip->reg_lock);
+ snd_azf3328_codec_outb(codec, IDX_IO_CODEC_DMA_FLAGS,
+ dma_init);
+ spin_unlock_irq(&chip->reg_lock);
+ }
snd_card_set_dev(card, &pci->dev);
@@ -2229,8 +2304,11 @@
card->private_data = chip;
+ /* chose to use MPU401_HW_AZT2320 ID instead of MPU401_HW_MPU401,
+ since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
- card, 0, MPU401_HW_MPU401, chip->mpu_io, MPU401_INFO_INTEGRATED,
+ card, 0,
+ MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
pci->irq, 0, &chip->rmidi
);
if (err < 0) {
@@ -2244,7 +2322,7 @@
if (err < 0)
goto out_err;
- err = snd_azf3328_pcm(chip, 0);
+ err = snd_azf3328_pcm(chip);
if (err < 0)
goto out_err;
@@ -2266,14 +2344,14 @@
opl3->private_data = chip;
sprintf(card->longname, "%s at 0x%lx, irq %i",
- card->shortname, chip->codec_io, chip->irq);
+ card->shortname, chip->ctrl_io, chip->irq);
err = snd_card_register(card);
if (err < 0)
goto out_err;
#ifdef MODULE
- printk(
+ printk(KERN_INFO
"azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168.\n"
"azt3328: Hardware was completely undocumented, unfortunately.\n"
"azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n"
@@ -2308,36 +2386,52 @@
}
#ifdef CONFIG_PM
+static inline void
+snd_azf3328_suspend_regs(unsigned long io_addr, unsigned count, u32 *saved_regs)
+{
+ unsigned reg;
+
+ for (reg = 0; reg < count; ++reg) {
+ *saved_regs = inl(io_addr);
+ snd_azf3328_dbgpm("suspend: io 0x%04lx: 0x%08x\n",
+ io_addr, *saved_regs);
+ ++saved_regs;
+ io_addr += sizeof(*saved_regs);
+ }
+}
+
static int
snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state)
{
struct snd_card *card = pci_get_drvdata(pci);
struct snd_azf3328 *chip = card->private_data;
- unsigned reg;
+ u16 *saved_regs_ctrl_u16;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- snd_pcm_suspend_all(chip->pcm);
+ snd_pcm_suspend_all(chip->pcm[AZF_CODEC_PLAYBACK]);
+ snd_pcm_suspend_all(chip->pcm[AZF_CODEC_I2S_OUT]);
- for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg)
- chip->saved_regs_mixer[reg] = inw(chip->mixer_io + reg * 2);
+ snd_azf3328_suspend_regs(chip->mixer_io,
+ ARRAY_SIZE(chip->saved_regs_mixer), chip->saved_regs_mixer);
/* make sure to disable master volume etc. to prevent looping sound */
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1);
snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1);
- for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg)
- chip->saved_regs_codec[reg] = inw(chip->codec_io + reg * 2);
+ snd_azf3328_suspend_regs(chip->ctrl_io,
+ ARRAY_SIZE(chip->saved_regs_ctrl), chip->saved_regs_ctrl);
/* manually store the one currently relevant write-only reg, too */
- chip->saved_regs_codec[IDX_IO_6AH / 2] = chip->shadow_reg_codec_6AH;
+ saved_regs_ctrl_u16 = (u16 *)chip->saved_regs_ctrl;
+ saved_regs_ctrl_u16[IDX_IO_6AH / 2] = chip->shadow_reg_ctrl_6AH;
- for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg)
- chip->saved_regs_game[reg] = inw(chip->game_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg)
- chip->saved_regs_mpu[reg] = inw(chip->mpu_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg)
- chip->saved_regs_opl3[reg] = inw(chip->opl3_io + reg * 2);
+ snd_azf3328_suspend_regs(chip->game_io,
+ ARRAY_SIZE(chip->saved_regs_game), chip->saved_regs_game);
+ snd_azf3328_suspend_regs(chip->mpu_io,
+ ARRAY_SIZE(chip->saved_regs_mpu), chip->saved_regs_mpu);
+ snd_azf3328_suspend_regs(chip->opl3_io,
+ ARRAY_SIZE(chip->saved_regs_opl3), chip->saved_regs_opl3);
pci_disable_device(pci);
pci_save_state(pci);
@@ -2345,12 +2439,28 @@
return 0;
}
+static inline void
+snd_azf3328_resume_regs(const u32 *saved_regs,
+ unsigned long io_addr,
+ unsigned count
+)
+{
+ unsigned reg;
+
+ for (reg = 0; reg < count; ++reg) {
+ outl(*saved_regs, io_addr);
+ snd_azf3328_dbgpm("resume: io 0x%04lx: 0x%08x --> 0x%08x\n",
+ io_addr, *saved_regs, inl(io_addr));
+ ++saved_regs;
+ io_addr += sizeof(*saved_regs);
+ }
+}
+
static int
snd_azf3328_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
- struct snd_azf3328 *chip = card->private_data;
- unsigned reg;
+ const struct snd_azf3328 *chip = card->private_data;
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
@@ -2362,16 +2472,24 @@
}
pci_set_master(pci);
- for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg)
- outw(chip->saved_regs_game[reg], chip->game_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg)
- outw(chip->saved_regs_mpu[reg], chip->mpu_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg)
- outw(chip->saved_regs_opl3[reg], chip->opl3_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg)
- outw(chip->saved_regs_mixer[reg], chip->mixer_io + reg * 2);
- for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg)
- outw(chip->saved_regs_codec[reg], chip->codec_io + reg * 2);
+ snd_azf3328_resume_regs(chip->saved_regs_game, chip->game_io,
+ ARRAY_SIZE(chip->saved_regs_game));
+ snd_azf3328_resume_regs(chip->saved_regs_mpu, chip->mpu_io,
+ ARRAY_SIZE(chip->saved_regs_mpu));
+ snd_azf3328_resume_regs(chip->saved_regs_opl3, chip->opl3_io,
+ ARRAY_SIZE(chip->saved_regs_opl3));
+
+ snd_azf3328_resume_regs(chip->saved_regs_mixer, chip->mixer_io,
+ ARRAY_SIZE(chip->saved_regs_mixer));
+
+ /* unfortunately with 32bit transfers, IDX_MIXER_PLAY_MASTER (0x02)
+ and IDX_MIXER_RESET (offset 0x00) get touched at the same time,
+ resulting in a mixer reset condition persisting until _after_
+ master vol was restored. Thus master vol needs an extra restore. */
+ outw(((u16 *)chip->saved_regs_mixer)[1], chip->mixer_io + 2);
+
+ snd_azf3328_resume_regs(chip->saved_regs_ctrl, chip->ctrl_io,
+ ARRAY_SIZE(chip->saved_regs_ctrl));
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
index 974e051..6f46b97 100644
--- a/sound/pci/azt3328.h
+++ b/sound/pci/azt3328.h
@@ -6,50 +6,59 @@
/*** main I/O area port indices ***/
/* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
-#define AZF_IO_SIZE_CODEC 0x80
-#define AZF_IO_SIZE_CODEC_PM 0x70
+#define AZF_IO_SIZE_CTRL 0x80
+#define AZF_IO_SIZE_CTRL_PM 0x70
-/* the driver initialisation suggests a layout of 4 main areas:
- * from 0x00 (playback), from 0x20 (recording) and from 0x40 (maybe MPU401??).
+/* the driver initialisation suggests a layout of 4 areas
+ * within the main card control I/O:
+ * from 0x00 (playback codec), from 0x20 (recording codec)
+ * and from 0x40 (most certainly I2S out codec).
* And another area from 0x60 to 0x6f (DirectX timer, IRQ management,
* power management etc.???). */
-/** playback area **/
-#define IDX_IO_PLAY_FLAGS 0x00 /* PU:0x0000 */
+#define AZF_IO_OFFS_CODEC_PLAYBACK 0x00
+#define AZF_IO_OFFS_CODEC_CAPTURE 0x20
+#define AZF_IO_OFFS_CODEC_I2S_OUT 0x40
+
+#define IDX_IO_CODEC_DMA_FLAGS 0x00 /* PU:0x0000 */
/* able to reactivate output after output muting due to 8/16bit
* output change, just like 0x0002.
* 0x0001 is the only bit that's able to start the DMA counter */
- #define DMA_RESUME 0x0001 /* paused if cleared ? */
+ #define DMA_RESUME 0x0001 /* paused if cleared? */
/* 0x0002 *temporarily* set during DMA stopping. hmm
* both 0x0002 and 0x0004 set in playback setup. */
/* able to reactivate output after output muting due to 8/16bit
* output change, just like 0x0001. */
- #define DMA_PLAY_SOMETHING1 0x0002 /* \ alternated (toggled) */
+ #define DMA_RUN_SOMETHING1 0x0002 /* \ alternated (toggled) */
/* 0x0004: NOT able to reactivate output */
- #define DMA_PLAY_SOMETHING2 0x0004 /* / bits */
+ #define DMA_RUN_SOMETHING2 0x0004 /* / bits */
#define SOMETHING_ALMOST_ALWAYS_SET 0x0008 /* ???; can be modified */
#define DMA_EPILOGUE_SOMETHING 0x0010
#define DMA_SOMETHING_ELSE 0x0020 /* ??? */
- #define SOMETHING_UNMODIFIABLE 0xffc0 /* unused ? not modifiable */
-#define IDX_IO_PLAY_IRQTYPE 0x02 /* PU:0x0001 */
+ #define SOMETHING_UNMODIFIABLE 0xffc0 /* unused? not modifiable */
+#define IDX_IO_CODEC_IRQTYPE 0x02 /* PU:0x0001 */
/* write back to flags in case flags are set, in order to ACK IRQ in handler
* (bit 1 of port 0x64 indicates interrupt for one of these three types)
* sometimes in this case it just writes 0xffff to globally ACK all IRQs
* settings written are not reflected when reading back, though.
- * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows ? */
- #define IRQ_PLAY_SOMETHING 0x0001 /* something & ACK */
- #define IRQ_FINISHED_PLAYBUF_1 0x0002 /* 1st dmabuf finished & ACK */
- #define IRQ_FINISHED_PLAYBUF_2 0x0004 /* 2nd dmabuf finished & ACK */
+ * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows? */
+ #define IRQ_SOMETHING 0x0001 /* something & ACK */
+ #define IRQ_FINISHED_DMABUF_1 0x0002 /* 1st dmabuf finished & ACK */
+ #define IRQ_FINISHED_DMABUF_2 0x0004 /* 2nd dmabuf finished & ACK */
#define IRQMASK_SOME_STATUS_1 0x0008 /* \ related bits */
#define IRQMASK_SOME_STATUS_2 0x0010 /* / (checked together in loop) */
- #define IRQMASK_UNMODIFIABLE 0xffe0 /* unused ? not modifiable */
-#define IDX_IO_PLAY_DMA_START_1 0x04 /* start address of 1st DMA play area, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_START_2 0x08 /* start address of 2nd DMA play area, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_LEN_1 0x0c /* length of 1st DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_DMA_LEN_2 0x0e /* length of 2nd DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
-#define IDX_IO_PLAY_DMA_CURROFS 0x14 /* offset within current DMA play area, PU:0x0000 */
-#define IDX_IO_PLAY_SOUNDFORMAT 0x16 /* PU:0x0010 */
+ #define IRQMASK_UNMODIFIABLE 0xffe0 /* unused? not modifiable */
+ /* start address of 1st DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_1 0x04
+ /* start address of 2nd DMA transfer area, PU:0x00000000 */
+#define IDX_IO_CODEC_DMA_START_2 0x08
+ /* both lengths of DMA transfer areas, PU:0x00000000
+ length1: offset 0x0c, length2: offset 0x0e */
+#define IDX_IO_CODEC_DMA_LENGTHS 0x0c
+#define IDX_IO_CODEC_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
+ /* offset within current DMA transfer area, PU:0x0000 */
+#define IDX_IO_CODEC_DMA_CURROFS 0x14
+#define IDX_IO_CODEC_SOUNDFORMAT 0x16 /* PU:0x0010 */
/* all unspecified bits can't be modified */
#define SOUNDFORMAT_FREQUENCY_MASK 0x000f
#define SOUNDFORMAT_XTAL1 0x00
@@ -76,6 +85,7 @@
#define SOUNDFORMAT_FLAG_16BIT 0x0010
#define SOUNDFORMAT_FLAG_2CHANNELS 0x0020
+
/* define frequency helpers, for maximum value safety */
enum azf_freq_t {
#define AZF_FREQ(rate) AZF_FREQ_##rate = rate
@@ -96,29 +106,6 @@
#undef AZF_FREQ
};
-/** recording area (see also: playback bit flag definitions) **/
-#define IDX_IO_REC_FLAGS 0x20 /* ??, PU:0x0000 */
-#define IDX_IO_REC_IRQTYPE 0x22 /* ??, PU:0x0000 */
- #define IRQ_REC_SOMETHING 0x0001 /* something & ACK */
- #define IRQ_FINISHED_RECBUF_1 0x0002 /* 1st dmabuf finished & ACK */
- #define IRQ_FINISHED_RECBUF_2 0x0004 /* 2nd dmabuf finished & ACK */
- /* hmm, maybe these are just the corresponding *recording* flags ?
- * but OTOH they are most likely at port 0x22 instead */
- #define IRQMASK_SOME_STATUS_1 0x0008 /* \ related bits */
- #define IRQMASK_SOME_STATUS_2 0x0010 /* / (checked together in loop) */
-#define IDX_IO_REC_DMA_START_1 0x24 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_START_2 0x28 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_LEN_1 0x2c /* PU:0x0000 */
-#define IDX_IO_REC_DMA_LEN_2 0x2e /* PU:0x0000 */
-#define IDX_IO_REC_DMA_CURRPOS 0x30 /* PU:0x00000000 */
-#define IDX_IO_REC_DMA_CURROFS 0x34 /* PU:0x00000000 */
-#define IDX_IO_REC_SOUNDFORMAT 0x36 /* PU:0x0000 */
-
-/** hmm, what is this I/O area for? MPU401?? or external DAC via I2S?? (after playback, recording, ???, timer) **/
-#define IDX_IO_SOMETHING_FLAGS 0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init, PU:0x0000 */
-/* general */
-#define IDX_IO_42H 0x42 /* PU:0x0001 */
-
/** DirectX timer, main interrupt area (FIXME: and something else?) **/
#define IDX_IO_TIMER_VALUE 0x60 /* found this timer area by pure luck :-) */
/* timer countdown value; triggers IRQ when timer is finished */
@@ -133,17 +120,19 @@
#define IDX_IO_IRQSTATUS 0x64
/* some IRQ bit in here might also be used to signal a power-management timer
* timeout, to request shutdown of the chip (e.g. AD1815JS has such a thing).
- * Some OPL3 hardware (e.g. in LM4560) has some special timer hardware which
- * can trigger an OPL3 timer IRQ, so maybe there's such a thing as well... */
+ * OPL3 hardware contains several timers which confusingly in most cases
+ * are NOT routed to an IRQ, but some designs (e.g. LM4560) DO support that,
+ * so I wouldn't be surprised at all to discover that AZF3328
+ * supports that thing as well... */
#define IRQ_PLAYBACK 0x0001
#define IRQ_RECORDING 0x0002
- #define IRQ_UNKNOWN1 0x0004 /* most probably I2S port */
+ #define IRQ_I2S_OUT 0x0004 /* this IS I2S, right!? (untested) */
#define IRQ_GAMEPORT 0x0008 /* Interrupt of Digital(ly) Enhanced Game Port */
#define IRQ_MPU401 0x0010
#define IRQ_TIMER 0x0020 /* DirectX timer */
- #define IRQ_UNKNOWN2 0x0040 /* probably unused, or possibly I2S port? */
- #define IRQ_UNKNOWN3 0x0080 /* probably unused, or possibly I2S port? */
+ #define IRQ_UNKNOWN2 0x0040 /* probably unused, or possibly OPL3 timer? */
+ #define IRQ_UNKNOWN3 0x0080 /* probably unused, or possibly OPL3 timer? */
#define IDX_IO_66H 0x66 /* writing 0xffff returns 0x0000 */
/* this is set to e.g. 0x3ff or 0x300, and writable;
* maybe some buffer limit, but I couldn't find out more, PU:0x00ff: */
@@ -206,7 +195,7 @@
/*** Gameport area port indices ***/
/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
#define AZF_IO_SIZE_GAME 0x08
-#define AZF_IO_SIZE_GAME_PM 0x06
+#define AZF_IO_SIZE_GAME_PM 0x06
enum {
AZF_GAME_LEGACY_IO_PORT = 0x200
@@ -272,6 +261,12 @@
* 11 --> 1/200: */
#define GAME_HWCFG_ADC_COUNTER_FREQ_MASK 0x06
+ /* FIXME: these values might be reversed... */
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_STD 0
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_1_2 1
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_1_20 2
+ #define GAME_HWCFG_ADC_COUNTER_FREQ_1_200 3
+
/* enable gameport legacy I/O address (0x200)
* I was unable to locate any configurability for a different address: */
#define GAME_HWCFG_LEGACY_ADDRESS_ENABLE 0x08
@@ -281,6 +276,7 @@
#define AZF_IO_SIZE_MPU_PM 0x04
/*** OPL3 synth ***/
+/* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
#define AZF_IO_SIZE_OPL3 0x08
#define AZF_IO_SIZE_OPL3_PM 0x06
/* hmm, given that a standard OPL3 has 4 registers only,
@@ -340,4 +336,7 @@
#define SET_CHAN_LEFT 1
#define SET_CHAN_RIGHT 2
+/* helper macro to align I/O port ranges to 32bit I/O width */
+#define AZF_ALIGN(x) (((x) + 3) & (~3))
+
#endif /* __SOUND_AZT3328_H */
diff --git a/sound/pci/cs46xx/cs46xx_lib.h b/sound/pci/cs46xx/cs46xx_lib.h
index 4eb55aa..b518949 100644
--- a/sound/pci/cs46xx/cs46xx_lib.h
+++ b/sound/pci/cs46xx/cs46xx_lib.h
@@ -35,7 +35,7 @@
#ifdef CONFIG_SND_CS46XX_NEW_DSP
-#define CS46XX_MIN_PERIOD_SIZE 1
+#define CS46XX_MIN_PERIOD_SIZE 64
#define CS46XX_MAX_PERIOD_SIZE 1024*1024
#else
#define CS46XX_MIN_PERIOD_SIZE 2048
diff --git a/sound/pci/ctxfi/ct20k2reg.h b/sound/pci/ctxfi/ct20k2reg.h
index 2d07986..e0394e3 100644
--- a/sound/pci/ctxfi/ct20k2reg.h
+++ b/sound/pci/ctxfi/ct20k2reg.h
@@ -11,9 +11,12 @@
/* Timer Registers */
-#define TIMER_TIMR 0x1B7004
-#define INTERRUPT_GIP 0x1B7010
-#define INTERRUPT_GIE 0x1B7014
+#define WC 0x1b7000
+#define TIMR 0x1b7004
+# define TIMR_IE (1<<15)
+# define TIMR_IP (1<<14)
+#define GIP 0x1b7010
+#define GIE 0x1b7014
/* I2C Registers */
#define I2C_IF_ADDRESS 0x1B9000
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
index a7f4a67..fee35cf 100644
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -63,7 +63,7 @@
hw = amixer->rsc.hw;
hw->amixer_set_mode(amixer->rsc.ctrl_blk, AMIXER_Y_IMMEDIATE);
amixer->input = rsc;
- if (NULL == rsc)
+ if (!rsc)
hw->amixer_set_x(amixer->rsc.ctrl_blk, BLANK_SLOT);
else
hw->amixer_set_x(amixer->rsc.ctrl_blk,
@@ -99,7 +99,7 @@
hw = amixer->rsc.hw;
amixer->sum = sum;
- if (NULL == sum) {
+ if (!sum) {
hw->amixer_set_se(amixer->rsc.ctrl_blk, 0);
} else {
hw->amixer_set_se(amixer->rsc.ctrl_blk, 1);
@@ -124,20 +124,20 @@
/* Program master and conjugate resources */
amixer->rsc.ops->master(&amixer->rsc);
- if (NULL != input)
+ if (input)
input->ops->master(input);
- if (NULL != sum)
+ if (sum)
sum->rsc.ops->master(&sum->rsc);
for (i = 0; i < amixer->rsc.msr; i++) {
hw->amixer_set_dirty_all(amixer->rsc.ctrl_blk);
- if (NULL != input) {
+ if (input) {
hw->amixer_set_x(amixer->rsc.ctrl_blk,
input->ops->output_slot(input));
input->ops->next_conj(input);
}
- if (NULL != sum) {
+ if (sum) {
hw->amixer_set_sadr(amixer->rsc.ctrl_blk,
sum->rsc.ops->index(&sum->rsc));
sum->rsc.ops->next_conj(&sum->rsc);
@@ -147,10 +147,10 @@
amixer->rsc.ops->next_conj(&amixer->rsc);
}
amixer->rsc.ops->master(&amixer->rsc);
- if (NULL != input)
+ if (input)
input->ops->master(input);
- if (NULL != sum)
+ if (sum)
sum->rsc.ops->master(&sum->rsc);
return 0;
@@ -303,7 +303,7 @@
*ramixer_mgr = NULL;
amixer_mgr = kzalloc(sizeof(*amixer_mgr), GFP_KERNEL);
- if (NULL == amixer_mgr)
+ if (!amixer_mgr)
return -ENOMEM;
err = rsc_mgr_init(&amixer_mgr->mgr, AMIXER, AMIXER_RESOURCE_NUM, hw);
@@ -456,7 +456,7 @@
*rsum_mgr = NULL;
sum_mgr = kzalloc(sizeof(*sum_mgr), GFP_KERNEL);
- if (NULL == sum_mgr)
+ if (!sum_mgr)
return -ENOMEM;
err = rsc_mgr_init(&sum_mgr->mgr, SUM, SUM_RESOURCE_NUM, hw);
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index a49c766..b1b3a64 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -136,7 +136,7 @@
struct snd_pcm_runtime *runtime;
struct ct_vm *vm;
- if (NULL == apcm->substream)
+ if (!apcm->substream)
return 0;
runtime = apcm->substream->runtime;
@@ -144,7 +144,7 @@
apcm->vm_block = vm->map(vm, apcm->substream, runtime->dma_bytes);
- if (NULL == apcm->vm_block)
+ if (!apcm->vm_block)
return -ENOENT;
return 0;
@@ -154,7 +154,7 @@
{
struct ct_vm *vm;
- if (NULL == apcm->vm_block)
+ if (!apcm->vm_block)
return;
vm = atc->vm;
@@ -231,16 +231,16 @@
static int select_rom(unsigned int pitch)
{
- if ((pitch > 0x00428f5c) && (pitch < 0x01b851ec)) {
+ if (pitch > 0x00428f5c && pitch < 0x01b851ec) {
/* 0.26 <= pitch <= 1.72 */
return 1;
- } else if ((0x01d66666 == pitch) || (0x01d66667 == pitch)) {
+ } else if (pitch == 0x01d66666 || pitch == 0x01d66667) {
/* pitch == 1.8375 */
return 2;
- } else if (0x02000000 == pitch) {
+ } else if (pitch == 0x02000000) {
/* pitch == 2 */
return 3;
- } else if ((pitch >= 0x0) && (pitch <= 0x08000000)) {
+ } else if (pitch >= 0x0 && pitch <= 0x08000000) {
/* 0 <= pitch <= 8 */
return 0;
} else {
@@ -283,7 +283,7 @@
/* Get AMIXER resource */
n_amixer = (n_amixer < 2) ? 2 : n_amixer;
apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
- if (NULL == apcm->amixers) {
+ if (!apcm->amixers) {
err = -ENOMEM;
goto error1;
}
@@ -311,7 +311,7 @@
INIT_VOL, atc->pcm[i+device*2]);
mutex_unlock(&atc->atc_mutex);
src = src->ops->next_interleave(src);
- if (NULL == src)
+ if (!src)
src = apcm->src;
}
@@ -334,7 +334,7 @@
struct srcimp *srcimp;
int i;
- if (NULL != apcm->srcimps) {
+ if (apcm->srcimps) {
for (i = 0; i < apcm->n_srcimp; i++) {
srcimp = apcm->srcimps[i];
srcimp->ops->unmap(srcimp);
@@ -345,7 +345,7 @@
apcm->srcimps = NULL;
}
- if (NULL != apcm->srccs) {
+ if (apcm->srccs) {
for (i = 0; i < apcm->n_srcc; i++) {
src_mgr->put_src(src_mgr, apcm->srccs[i]);
apcm->srccs[i] = NULL;
@@ -354,7 +354,7 @@
apcm->srccs = NULL;
}
- if (NULL != apcm->amixers) {
+ if (apcm->amixers) {
for (i = 0; i < apcm->n_amixer; i++) {
amixer_mgr->put_amixer(amixer_mgr, apcm->amixers[i]);
apcm->amixers[i] = NULL;
@@ -363,17 +363,17 @@
apcm->amixers = NULL;
}
- if (NULL != apcm->mono) {
+ if (apcm->mono) {
sum_mgr->put_sum(sum_mgr, apcm->mono);
apcm->mono = NULL;
}
- if (NULL != apcm->src) {
+ if (apcm->src) {
src_mgr->put_src(src_mgr, apcm->src);
apcm->src = NULL;
}
- if (NULL != apcm->vm_block) {
+ if (apcm->vm_block) {
/* Undo device virtual mem map */
ct_unmap_audio_buffer(atc, apcm);
apcm->vm_block = NULL;
@@ -419,7 +419,7 @@
src->ops->set_state(src, SRC_STATE_OFF);
src->ops->commit_write(src);
- if (NULL != apcm->srccs) {
+ if (apcm->srccs) {
for (i = 0; i < apcm->n_srcc; i++) {
src = apcm->srccs[i];
src->ops->set_bm(src, 0);
@@ -544,18 +544,18 @@
if (n_srcc) {
apcm->srccs = kzalloc(sizeof(void *)*n_srcc, GFP_KERNEL);
- if (NULL == apcm->srccs)
+ if (!apcm->srccs)
return -ENOMEM;
}
if (n_amixer) {
apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
- if (NULL == apcm->amixers) {
+ if (!apcm->amixers) {
err = -ENOMEM;
goto error1;
}
}
apcm->srcimps = kzalloc(sizeof(void *)*n_srcimp, GFP_KERNEL);
- if (NULL == apcm->srcimps) {
+ if (!apcm->srcimps) {
err = -ENOMEM;
goto error1;
}
@@ -818,7 +818,7 @@
/* Get AMIXER resource */
n_amixer = (n_amixer < 2) ? 2 : n_amixer;
apcm->amixers = kzalloc(sizeof(void *)*n_amixer, GFP_KERNEL);
- if (NULL == apcm->amixers) {
+ if (!apcm->amixers) {
err = -ENOMEM;
goto error1;
}
@@ -919,7 +919,7 @@
amixer = apcm->amixers[i];
amixer->ops->setup(amixer, &src->rsc, INIT_VOL, NULL);
src = src->ops->next_interleave(src);
- if (NULL == src)
+ if (!src)
src = apcm->src;
}
/* Connect to SPDIFOO */
@@ -1121,7 +1121,7 @@
struct ct_mixer *mixer = NULL;
/* disconnect internal mixer objects */
- if (NULL != atc->mixer) {
+ if (atc->mixer) {
mixer = atc->mixer;
mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
mixer->set_input_right(mixer, MIX_LINE_IN, NULL);
@@ -1131,7 +1131,7 @@
mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
}
- if (NULL != atc->daios) {
+ if (atc->daios) {
daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
for (i = 0; i < atc->n_daio; i++) {
daio = atc->daios[i];
@@ -1149,7 +1149,7 @@
atc->daios = NULL;
}
- if (NULL != atc->pcm) {
+ if (atc->pcm) {
sum_mgr = atc->rsc_mgrs[SUM];
for (i = 0; i < atc->n_pcm; i++)
sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
@@ -1158,7 +1158,7 @@
atc->pcm = NULL;
}
- if (NULL != atc->srcs) {
+ if (atc->srcs) {
src_mgr = atc->rsc_mgrs[SRC];
for (i = 0; i < atc->n_src; i++)
src_mgr->put_src(src_mgr, atc->srcs[i]);
@@ -1167,7 +1167,7 @@
atc->srcs = NULL;
}
- if (NULL != atc->srcimps) {
+ if (atc->srcimps) {
srcimp_mgr = atc->rsc_mgrs[SRCIMP];
for (i = 0; i < atc->n_srcimp; i++) {
srcimp = atc->srcimps[i];
@@ -1185,7 +1185,7 @@
{
int i = 0;
- if (NULL == atc)
+ if (!atc)
return 0;
if (atc->timer) {
@@ -1196,21 +1196,20 @@
atc_release_resources(atc);
/* Destroy internal mixer objects */
- if (NULL != atc->mixer)
+ if (atc->mixer)
ct_mixer_destroy(atc->mixer);
for (i = 0; i < NUM_RSCTYP; i++) {
- if ((NULL != rsc_mgr_funcs[i].destroy) &&
- (NULL != atc->rsc_mgrs[i]))
+ if (rsc_mgr_funcs[i].destroy && atc->rsc_mgrs[i])
rsc_mgr_funcs[i].destroy(atc->rsc_mgrs[i]);
}
- if (NULL != atc->hw)
+ if (atc->hw)
destroy_hw_obj((struct hw *)atc->hw);
/* Destroy device virtual memory manager object */
- if (NULL != atc->vm) {
+ if (atc->vm) {
ct_vm_destroy(atc->vm);
atc->vm = NULL;
}
@@ -1275,7 +1274,7 @@
alsa_dev_funcs[MIXER].public_name = atc->chip_name;
for (i = 0; i < NUM_CTALSADEVS; i++) {
- if (NULL == alsa_dev_funcs[i].create)
+ if (!alsa_dev_funcs[i].create)
continue;
err = alsa_dev_funcs[i].create(atc, i,
@@ -1312,7 +1311,7 @@
return err;
for (i = 0; i < NUM_RSCTYP; i++) {
- if (NULL == rsc_mgr_funcs[i].create)
+ if (!rsc_mgr_funcs[i].create)
continue;
err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]);
@@ -1339,19 +1338,19 @@
int err, i;
atc->daios = kzalloc(sizeof(void *)*(DAIONUM), GFP_KERNEL);
- if (NULL == atc->daios)
+ if (!atc->daios)
return -ENOMEM;
atc->srcs = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
- if (NULL == atc->srcs)
+ if (!atc->srcs)
return -ENOMEM;
atc->srcimps = kzalloc(sizeof(void *)*(2*2), GFP_KERNEL);
- if (NULL == atc->srcimps)
+ if (!atc->srcimps)
return -ENOMEM;
atc->pcm = kzalloc(sizeof(void *)*(2*4), GFP_KERNEL);
- if (NULL == atc->pcm)
+ if (!atc->pcm)
return -ENOMEM;
daio_mgr = (struct daio_mgr *)atc->rsc_mgrs[DAIO];
@@ -1648,7 +1647,7 @@
*ratc = NULL;
atc = kzalloc(sizeof(*atc), GFP_KERNEL);
- if (NULL == atc)
+ if (!atc)
return -ENOMEM;
/* Set operations */
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
index deb6cfa..af56eb9 100644
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -173,7 +173,7 @@
int i;
entry = kzalloc((sizeof(*entry) * daio->rscl.msr), GFP_KERNEL);
- if (NULL == entry)
+ if (!entry)
return -ENOMEM;
/* Program master and conjugate resources */
@@ -201,7 +201,7 @@
int i;
entry = kzalloc((sizeof(*entry) * daio->rscr.msr), GFP_KERNEL);
- if (NULL == entry)
+ if (!entry)
return -ENOMEM;
/* Program master and conjugate resources */
@@ -228,7 +228,7 @@
struct daio *daio = &dao->daio;
int i;
- if (NULL == dao->imappers[0])
+ if (!dao->imappers[0])
return 0;
entry = dao->imappers[0];
@@ -252,7 +252,7 @@
struct daio *daio = &dao->daio;
int i;
- if (NULL == dao->imappers[daio->rscl.msr])
+ if (!dao->imappers[daio->rscl.msr])
return 0;
entry = dao->imappers[daio->rscl.msr];
@@ -408,7 +408,7 @@
return err;
dao->imappers = kzalloc(sizeof(void *)*desc->msr*2, GFP_KERNEL);
- if (NULL == dao->imappers) {
+ if (!dao->imappers) {
err = -ENOMEM;
goto error1;
}
@@ -442,11 +442,11 @@
static int dao_rsc_uninit(struct dao *dao)
{
- if (NULL != dao->imappers) {
- if (NULL != dao->imappers[0])
+ if (dao->imappers) {
+ if (dao->imappers[0])
dao_clear_left_input(dao);
- if (NULL != dao->imappers[dao->daio.rscl.msr])
+ if (dao->imappers[dao->daio.rscl.msr])
dao_clear_right_input(dao);
kfree(dao->imappers);
@@ -555,7 +555,7 @@
/* Allocate mem for daio resource */
if (desc->type <= DAIO_OUT_MAX) {
dao = kzalloc(sizeof(*dao), GFP_KERNEL);
- if (NULL == dao) {
+ if (!dao) {
err = -ENOMEM;
goto error;
}
@@ -566,7 +566,7 @@
*rdaio = &dao->daio;
} else {
dai = kzalloc(sizeof(*dai), GFP_KERNEL);
- if (NULL == dai) {
+ if (!dai) {
err = -ENOMEM;
goto error;
}
@@ -583,9 +583,9 @@
return 0;
error:
- if (NULL != dao)
+ if (dao)
kfree(dao);
- else if (NULL != dai)
+ else if (dai)
kfree(dai);
spin_lock_irqsave(&mgr->mgr_lock, flags);
@@ -663,7 +663,7 @@
int err;
spin_lock_irqsave(&mgr->imap_lock, flags);
- if ((0 == entry->addr) && (mgr->init_imap_added)) {
+ if (!entry->addr && mgr->init_imap_added) {
input_mapper_delete(&mgr->imappers, mgr->init_imap,
daio_map_op, mgr);
mgr->init_imap_added = 0;
@@ -707,7 +707,7 @@
*rdaio_mgr = NULL;
daio_mgr = kzalloc(sizeof(*daio_mgr), GFP_KERNEL);
- if (NULL == daio_mgr)
+ if (!daio_mgr)
return -ENOMEM;
err = rsc_mgr_init(&daio_mgr->mgr, DAIO, DAIO_RESOURCE_NUM, hw);
@@ -718,7 +718,7 @@
spin_lock_init(&daio_mgr->imap_lock);
INIT_LIST_HEAD(&daio_mgr->imappers);
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
- if (NULL == entry) {
+ if (!entry) {
err = -ENOMEM;
goto error2;
}
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index ad3e1d1..0cf400f 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -168,7 +168,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -494,7 +494,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -515,7 +515,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -702,7 +702,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -723,7 +723,7 @@
*rblk = NULL;
/*blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;*/
@@ -909,7 +909,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -958,7 +958,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -1152,7 +1152,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
blk->i2sctl = hw_read_20kx(hw, I2SCTL);
@@ -1808,7 +1808,7 @@
/* By default, Hendrix card UAA Bar0 should be using memory... */
io_base = pci_resource_start(pci, 0);
mem_base = ioremap(io_base, pci_resource_len(pci, 0));
- if (NULL == mem_base)
+ if (!mem_base)
return -ENOENT;
/* Read current mode from Mode Change Register */
@@ -1977,7 +1977,7 @@
hw->irq = -1;
- if (NULL != ((void *)hw->mem_base))
+ if (hw->mem_base)
iounmap((void *)hw->mem_base);
hw->mem_base = (unsigned long)NULL;
@@ -2274,7 +2274,7 @@
*rhw = NULL;
hw20k1 = kzalloc(sizeof(*hw20k1), GFP_KERNEL);
- if (NULL == hw20k1)
+ if (!hw20k1)
return -ENOMEM;
spin_lock_init(&hw20k1->reg_20k1_lock);
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index dec46d0..b6b11bf 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -166,7 +166,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -492,7 +492,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -513,7 +513,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -702,7 +702,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -891,7 +891,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -941,7 +941,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
*rblk = blk;
@@ -1092,7 +1092,7 @@
*rblk = NULL;
blk = kzalloc(sizeof(*blk), GFP_KERNEL);
- if (NULL == blk)
+ if (!blk)
return -ENOMEM;
for (i = 0; i < 8; i++) {
@@ -1112,6 +1112,26 @@
return 0;
}
+/* Timer interrupt */
+static int set_timer_irq(struct hw *hw, int enable)
+{
+ hw_write_20kx(hw, GIE, enable ? IT_INT : 0);
+ return 0;
+}
+
+static int set_timer_tick(struct hw *hw, unsigned int ticks)
+{
+ if (ticks)
+ ticks |= TIMR_IE | TIMR_IP;
+ hw_write_20kx(hw, TIMR, ticks);
+ return 0;
+}
+
+static unsigned int get_wc(struct hw *hw)
+{
+ return hw_read_20kx(hw, WC);
+}
+
/* Card hardware initialization block */
struct dac_conf {
unsigned int msr; /* master sample rate in rsrs */
@@ -1841,6 +1861,22 @@
return 0;
}
+static irqreturn_t ct_20k2_interrupt(int irq, void *dev_id)
+{
+ struct hw *hw = dev_id;
+ unsigned int status;
+
+ status = hw_read_20kx(hw, GIP);
+ if (!status)
+ return IRQ_NONE;
+
+ if (hw->irq_callback)
+ hw->irq_callback(hw->irq_callback_data, status);
+
+ hw_write_20kx(hw, GIP, status);
+ return IRQ_HANDLED;
+}
+
static int hw_card_start(struct hw *hw)
{
int err = 0;
@@ -1868,7 +1904,7 @@
hw->io_base = pci_resource_start(hw->pci, 2);
hw->mem_base = (unsigned long)ioremap(hw->io_base,
pci_resource_len(hw->pci, 2));
- if (NULL == (void *)hw->mem_base) {
+ if (!hw->mem_base) {
err = -ENOENT;
goto error2;
}
@@ -1879,12 +1915,15 @@
set_field(&gctl, GCTL_UAA, 0);
hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
- /*if ((err = request_irq(pci->irq, ct_atc_interrupt, IRQF_SHARED,
- atc->chip_details->nm_card, hw))) {
- goto error3;
+ if (hw->irq < 0) {
+ err = request_irq(pci->irq, ct_20k2_interrupt, IRQF_SHARED,
+ "ctxfi", hw);
+ if (err < 0) {
+ printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+ goto error2;
+ }
+ hw->irq = pci->irq;
}
- hw->irq = pci->irq;
- */
pci_set_master(pci);
@@ -1923,7 +1962,7 @@
hw->irq = -1;
- if (NULL != ((void *)hw->mem_base))
+ if (hw->mem_base)
iounmap((void *)hw->mem_base);
hw->mem_base = (unsigned long)NULL;
@@ -1972,7 +2011,7 @@
hw_write_20kx(hw, GLOBAL_CNTL_GCTL, gctl);
/* Reset all global pending interrupts */
- hw_write_20kx(hw, INTERRUPT_GIE, 0);
+ hw_write_20kx(hw, GIE, 0);
/* Reset all SRC pending interrupts */
hw_write_20kx(hw, SRC_IP, 0);
@@ -2149,6 +2188,10 @@
.daio_mgr_set_imapnxt = daio_mgr_set_imapnxt,
.daio_mgr_set_imapaddr = daio_mgr_set_imapaddr,
.daio_mgr_commit_write = daio_mgr_commit_write,
+
+ .set_timer_irq = set_timer_irq,
+ .set_timer_tick = set_timer_tick,
+ .get_wc = get_wc,
};
int __devinit create_20k2_hw_obj(struct hw **rhw)
diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
index f26d7cd..15c1e72 100644
--- a/sound/pci/ctxfi/ctmixer.c
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -654,7 +654,7 @@
int err;
kctl = snd_ctl_new1(new, mixer->atc);
- if (NULL == kctl)
+ if (!kctl)
return -ENOMEM;
if (SNDRV_CTL_ELEM_IFACE_PCM == kctl->id.iface)
@@ -837,17 +837,17 @@
*rmixer = NULL;
/* Allocate mem for mixer obj */
mixer = kzalloc(sizeof(*mixer), GFP_KERNEL);
- if (NULL == mixer)
+ if (!mixer)
return -ENOMEM;
mixer->amixers = kzalloc(sizeof(void *)*(NUM_CT_AMIXERS*CHN_NUM),
GFP_KERNEL);
- if (NULL == mixer->amixers) {
+ if (!mixer->amixers) {
err = -ENOMEM;
goto error1;
}
mixer->sums = kzalloc(sizeof(void *)*(NUM_CT_SUMS*CHN_NUM), GFP_KERNEL);
- if (NULL == mixer->sums) {
+ if (!mixer->sums) {
err = -ENOMEM;
goto error2;
}
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 60ea231..d0dc227 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -97,7 +97,7 @@
{
struct ct_atc_pcm *apcm = atc_pcm;
- if (NULL == apcm->substream)
+ if (!apcm->substream)
return;
snd_pcm_period_elapsed(apcm->substream);
@@ -123,7 +123,7 @@
int err;
apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
- if (NULL == apcm)
+ if (!apcm)
return -ENOMEM;
apcm->substream = substream;
@@ -271,7 +271,7 @@
int err;
apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
- if (NULL == apcm)
+ if (!apcm)
return -ENOMEM;
apcm->started = 0;
diff --git a/sound/pci/ctxfi/ctresource.c b/sound/pci/ctxfi/ctresource.c
index 889c495..7dfaf67 100644
--- a/sound/pci/ctxfi/ctresource.c
+++ b/sound/pci/ctxfi/ctresource.c
@@ -144,7 +144,7 @@
rsc->msr = msr;
rsc->hw = hw;
rsc->ops = &rsc_generic_ops;
- if (NULL == hw) {
+ if (!hw) {
rsc->ctrl_blk = NULL;
return 0;
}
@@ -216,7 +216,7 @@
mgr->type = NUM_RSCTYP;
mgr->rscs = kzalloc(((amount + 8 - 1) / 8), GFP_KERNEL);
- if (NULL == mgr->rscs)
+ if (!mgr->rscs)
return -ENOMEM;
switch (type) {
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
index df43a5c..c749fa7 100644
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -441,7 +441,7 @@
else
src = kzalloc(sizeof(*src), GFP_KERNEL);
- if (NULL == src) {
+ if (!src) {
err = -ENOMEM;
goto error1;
}
@@ -550,7 +550,7 @@
*rsrc_mgr = NULL;
src_mgr = kzalloc(sizeof(*src_mgr), GFP_KERNEL);
- if (NULL == src_mgr)
+ if (!src_mgr)
return -ENOMEM;
err = rsc_mgr_init(&src_mgr->mgr, SRC, SRC_RESOURCE_NUM, hw);
@@ -679,7 +679,7 @@
/* Reserve memory for imapper nodes */
srcimp->imappers = kzalloc(sizeof(struct imapper)*desc->msr,
GFP_KERNEL);
- if (NULL == srcimp->imappers) {
+ if (!srcimp->imappers) {
err = -ENOMEM;
goto error1;
}
@@ -833,7 +833,7 @@
*rsrcimp_mgr = NULL;
srcimp_mgr = kzalloc(sizeof(*srcimp_mgr), GFP_KERNEL);
- if (NULL == srcimp_mgr)
+ if (!srcimp_mgr)
return -ENOMEM;
err = rsc_mgr_init(&srcimp_mgr->mgr, SRCIMP, SRCIMP_RESOURCE_NUM, hw);
@@ -844,7 +844,7 @@
spin_lock_init(&srcimp_mgr->imap_lock);
INIT_LIST_HEAD(&srcimp_mgr->imappers);
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
- if (NULL == entry) {
+ if (!entry) {
err = -ENOMEM;
goto error2;
}
diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c
index 67665a7..6b78752 100644
--- a/sound/pci/ctxfi/ctvmem.c
+++ b/sound/pci/ctxfi/ctvmem.c
@@ -60,7 +60,7 @@
}
block = kzalloc(sizeof(*block), GFP_KERNEL);
- if (NULL == block)
+ if (!block)
goto out;
block->addr = entry->addr;
@@ -181,7 +181,7 @@
*rvm = NULL;
vm = kzalloc(sizeof(*vm), GFP_KERNEL);
- if (NULL == vm)
+ if (!vm)
return -ENOMEM;
mutex_init(&vm->lock);
@@ -189,7 +189,7 @@
/* Allocate page table pages */
for (i = 0; i < CT_PTP_NUM; i++) {
vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (NULL == vm->ptp[i])
+ if (!vm->ptp[i])
break;
}
if (!i) {
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 04438f1..55545e0 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -46,6 +46,20 @@
Say Y here to enable the jack plugging notification via
input layer.
+config SND_HDA_PATCH_LOADER
+ bool "Support initialization patch loading for HD-audio"
+ depends on EXPERIMENTAL
+ select FW_LOADER
+ select SND_HDA_HWDEP
+ select SND_HDA_RECONFIG
+ help
+ Say Y here to allow the HD-audio driver to load a pseudo
+ firmware file ("patch") for overriding the BIOS setup at
+ start up. The "patch" file can be specified via patch module
+ option, such as patch=hda-init.
+
+ This option turns on hwdep and reconfig features automatically.
+
config SND_HDA_CODEC_REALTEK
bool "Build Realtek HD-audio codec support"
default y
@@ -134,6 +148,19 @@
def_bool y
depends on SND_HDA_CODEC_INTELHDMI
+config SND_HDA_CODEC_CIRRUS
+ bool "Build Cirrus Logic codec support"
+ depends on SND_HDA_INTEL
+ default y
+ help
+ Say Y here to include Cirrus Logic codec support in
+ snd-hda-intel driver, such as CS4206.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-cirrus.
+ This module is automatically loaded at probing.
+
config SND_HDA_CODEC_CONEXANT
bool "Build Conexant HD-audio codec support"
default y
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index e3081d4..315a1c4 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -13,6 +13,7 @@
snd-hda-codec-idt-objs := patch_sigmatel.o
snd-hda-codec-si3054-objs := patch_si3054.o
snd-hda-codec-atihdmi-objs := patch_atihdmi.o
+snd-hda-codec-cirrus-objs := patch_cirrus.o
snd-hda-codec-ca0110-objs := patch_ca0110.o
snd-hda-codec-conexant-objs := patch_conexant.o
snd-hda-codec-via-objs := patch_via.o
@@ -41,6 +42,9 @@
ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
endif
+ifdef CONFIG_SND_HDA_CODEC_CIRRUS
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cirrus.o
+endif
ifdef CONFIG_SND_HDA_CODEC_CA0110
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-ca0110.o
endif
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index b0275a0..3f51a98 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -24,6 +24,7 @@
#include <linux/workqueue.h>
#include <sound/core.h>
#include "hda_beep.h"
+#include "hda_local.h"
enum {
DIGBEEP_HZ_STEP = 46875, /* 46.875 Hz */
@@ -118,6 +119,9 @@
struct hda_beep *beep;
int err;
+ if (!snd_hda_get_bool_hint(codec, "beep"))
+ return 0; /* disabled explicitly */
+
beep = kzalloc(sizeof(*beep), GFP_KERNEL);
if (beep == NULL)
return -ENOMEM;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index c7df01b..af989f6 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -44,6 +44,7 @@
/* codec vendor labels */
static struct hda_vendor_id hda_vendor_ids[] = {
{ 0x1002, "ATI" },
+ { 0x1013, "Cirrus Logic" },
{ 0x1057, "Motorola" },
{ 0x1095, "Silicon Image" },
{ 0x10de, "Nvidia" },
@@ -150,7 +151,14 @@
{
u32 val;
- val = (u32)(codec->addr & 0x0f) << 28;
+ if ((codec->addr & ~0xf) || (direct & ~1) || (nid & ~0x7f) ||
+ (verb & ~0xfff) || (parm & ~0xffff)) {
+ printk(KERN_ERR "hda-codec: out of range cmd %x:%x:%x:%x:%x\n",
+ codec->addr, direct, nid, verb, parm);
+ return ~0;
+ }
+
+ val = (u32)codec->addr << 28;
val |= (u32)direct << 27;
val |= (u32)nid << 20;
val |= verb << 8;
@@ -167,6 +175,9 @@
struct hda_bus *bus = codec->bus;
int err;
+ if (cmd == ~0)
+ return -1;
+
if (res)
*res = -1;
again:
@@ -291,11 +302,20 @@
unsigned int parm;
int i, conn_len, conns;
unsigned int shift, num_elems, mask;
+ unsigned int wcaps;
hda_nid_t prev_nid;
if (snd_BUG_ON(!conn_list || max_conns <= 0))
return -EINVAL;
+ wcaps = get_wcaps(codec, nid);
+ if (!(wcaps & AC_WCAP_CONN_LIST) &&
+ get_wcaps_type(wcaps) != AC_WID_VOL_KNB) {
+ snd_printk(KERN_WARNING "hda_codec: "
+ "connection list not available for 0x%x\n", nid);
+ return -EINVAL;
+ }
+
parm = snd_hda_param_read(codec, nid, AC_PAR_CONNLIST_LEN);
if (parm & AC_CLIST_LONG) {
/* long form */
@@ -316,6 +336,8 @@
/* single connection */
parm = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_LIST, 0);
+ if (parm == -1 && codec->bus->rirb_error)
+ return -EIO;
conn_list[0] = parm & mask;
return 1;
}
@@ -327,9 +349,12 @@
int range_val;
hda_nid_t val, n;
- if (i % num_elems == 0)
+ if (i % num_elems == 0) {
parm = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_LIST, i);
+ if (parm == -1 && codec->bus->rirb_error)
+ return -EIO;
+ }
range_val = !!(parm & (1 << (shift-1))); /* ranges */
val = parm & mask;
if (val == 0) {
@@ -727,8 +752,7 @@
for (i = 0; i < codec->num_nodes; i++, nid++) {
struct hda_pincfg *pin;
unsigned int wcaps = get_wcaps(codec, nid);
- unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
- AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wcaps);
if (wid_type != AC_WID_PIN)
continue;
pin = snd_array_new(&codec->init_pins);
@@ -891,7 +915,7 @@
* Returns 0 if successful, or a negative error code.
*/
int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- int do_init, struct hda_codec **codecp)
+ struct hda_codec **codecp)
{
struct hda_codec *codec;
char component[31];
@@ -984,11 +1008,6 @@
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D0);
- if (do_init) {
- err = snd_hda_codec_configure(codec);
- if (err < 0)
- goto error;
- }
snd_hda_codec_proc_new(codec);
snd_hda_create_hwdep(codec);
@@ -1042,6 +1061,7 @@
err = init_unsol_queue(codec->bus);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_configure);
/**
* snd_hda_codec_setup_stream - set up the codec for streaming
@@ -2356,16 +2376,20 @@
hda_nid_t nid;
int i;
- snd_hda_codec_write(codec, fg, 0, AC_VERB_SET_POWER_STATE,
+ /* this delay seems necessary to avoid click noise at power-down */
+ if (power_state == AC_PWRST_D3)
+ msleep(100);
+ snd_hda_codec_read(codec, fg, 0, AC_VERB_SET_POWER_STATE,
power_state);
- msleep(10); /* partial workaround for "azx_get_response timeout" */
+ /* partial workaround for "azx_get_response timeout" */
+ if (power_state == AC_PWRST_D0)
+ msleep(10);
nid = codec->start_nid;
for (i = 0; i < codec->num_nodes; i++, nid++) {
unsigned int wcaps = get_wcaps(codec, nid);
if (wcaps & AC_WCAP_POWER) {
- unsigned int wid_type = (wcaps & AC_WCAP_TYPE) >>
- AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wcaps);
if (power_state == AC_PWRST_D3 &&
wid_type == AC_WID_PIN) {
unsigned int pincap;
@@ -2573,7 +2597,7 @@
case 20:
case 24:
case 32:
- if (maxbps >= 32)
+ if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE)
val |= 0x40;
else if (maxbps >= 24)
val |= 0x30;
@@ -2700,11 +2724,12 @@
bps = 20;
}
}
- else if (streams == AC_SUPFMT_FLOAT32) {
- /* should be exclusive */
+ if (streams & AC_SUPFMT_FLOAT32) {
formats |= SNDRV_PCM_FMTBIT_FLOAT_LE;
- bps = 32;
- } else if (streams == AC_SUPFMT_AC3) {
+ if (!bps)
+ bps = 32;
+ }
+ if (streams == AC_SUPFMT_AC3) {
/* should be exclusive */
/* temporary hack: we have still no proper support
* for the direct AC3 stream...
@@ -3102,7 +3127,7 @@
tbl = q;
if (tbl->value >= 0 && tbl->value < num_configs) {
-#ifdef CONFIG_SND_DEBUG_DETECT
+#ifdef CONFIG_SND_DEBUG_VERBOSE
char tmp[10];
const char *model = NULL;
if (models)
@@ -3655,8 +3680,7 @@
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
- unsigned int wid_type =
- (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wid_caps);
unsigned int def_conf;
short assoc, loc;
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 1b75f28..99552fb 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -830,7 +830,8 @@
int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp,
struct hda_bus **busp);
int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- int do_init, struct hda_codec **codecp);
+ struct hda_codec **codecp);
+int snd_hda_codec_configure(struct hda_codec *codec);
/*
* low level functions
@@ -938,6 +939,13 @@
#define snd_hda_codec_needs_resume(codec) 1
#endif
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+/*
+ * patch firmware
+ */
+int snd_hda_load_patch(struct hda_bus *bus, const char *patch);
+#endif
+
/*
* Codec modularization
*/
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 1d5797a..b36f6c5 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -121,11 +121,17 @@
if (node == NULL)
return -ENOMEM;
node->nid = nid;
- nconns = snd_hda_get_connections(codec, nid, conn_list,
- HDA_MAX_CONNECTIONS);
- if (nconns < 0) {
- kfree(node);
- return nconns;
+ node->wid_caps = get_wcaps(codec, nid);
+ node->type = get_wcaps_type(node->wid_caps);
+ if (node->wid_caps & AC_WCAP_CONN_LIST) {
+ nconns = snd_hda_get_connections(codec, nid, conn_list,
+ HDA_MAX_CONNECTIONS);
+ if (nconns < 0) {
+ kfree(node);
+ return nconns;
+ }
+ } else {
+ nconns = 0;
}
if (nconns <= ARRAY_SIZE(node->slist))
node->conn_list = node->slist;
@@ -140,8 +146,6 @@
}
memcpy(node->conn_list, conn_list, nconns * sizeof(hda_nid_t));
node->nconns = nconns;
- node->wid_caps = get_wcaps(codec, nid);
- node->type = (node->wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
if (node->type == AC_WID_PIN) {
node->pin_caps = snd_hda_query_pin_caps(codec, node->nid);
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 6812fbe..cc24e67 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -24,6 +24,7 @@
#include <linux/compat.h>
#include <linux/mutex.h>
#include <linux/ctype.h>
+#include <linux/firmware.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
@@ -312,12 +313,8 @@
return len;
}
-static ssize_t init_verbs_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int parse_init_verbs(struct hda_codec *codec, const char *buf)
{
- struct snd_hwdep *hwdep = dev_get_drvdata(dev);
- struct hda_codec *codec = hwdep->private_data;
struct hda_verb *v;
int nid, verb, param;
@@ -331,6 +328,18 @@
v->nid = nid;
v->verb = verb;
v->param = param;
+ return 0;
+}
+
+static ssize_t init_verbs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ int err = parse_init_verbs(codec, buf);
+ if (err < 0)
+ return err;
return count;
}
@@ -376,19 +385,15 @@
#define MAX_HINTS 1024
-static ssize_t hints_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int parse_hints(struct hda_codec *codec, const char *buf)
{
- struct snd_hwdep *hwdep = dev_get_drvdata(dev);
- struct hda_codec *codec = hwdep->private_data;
char *key, *val;
struct hda_hint *hint;
while (isspace(*buf))
buf++;
if (!*buf || *buf == '#' || *buf == '\n')
- return count;
+ return 0;
if (*buf == '=')
return -EINVAL;
key = kstrndup_noeol(buf, 1024);
@@ -411,7 +416,7 @@
kfree(hint->key);
hint->key = key;
hint->val = val;
- return count;
+ return 0;
}
/* allocate a new hint entry */
if (codec->hints.used >= MAX_HINTS)
@@ -424,6 +429,18 @@
}
hint->key = key;
hint->val = val;
+ return 0;
+}
+
+static ssize_t hints_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ int err = parse_hints(codec, buf);
+ if (err < 0)
+ return err;
return count;
}
@@ -469,20 +486,24 @@
#define MAX_PIN_CONFIGS 32
+static int parse_user_pin_configs(struct hda_codec *codec, const char *buf)
+{
+ int nid, cfg;
+
+ if (sscanf(buf, "%i %i", &nid, &cfg) != 2)
+ return -EINVAL;
+ if (!nid)
+ return -EINVAL;
+ return snd_hda_add_pincfg(codec, &codec->user_pins, nid, cfg);
+}
+
static ssize_t user_pin_configs_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct snd_hwdep *hwdep = dev_get_drvdata(dev);
struct hda_codec *codec = hwdep->private_data;
- int nid, cfg;
- int err;
-
- if (sscanf(buf, "%i %i", &nid, &cfg) != 2)
- return -EINVAL;
- if (!nid)
- return -EINVAL;
- err = snd_hda_add_pincfg(codec, &codec->user_pins, nid, cfg);
+ int err = parse_user_pin_configs(codec, buf);
if (err < 0)
return err;
return count;
@@ -553,3 +574,180 @@
EXPORT_SYMBOL_HDA(snd_hda_get_bool_hint);
#endif /* CONFIG_SND_HDA_RECONFIG */
+
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+
+/* parser mode */
+enum {
+ LINE_MODE_NONE,
+ LINE_MODE_CODEC,
+ LINE_MODE_MODEL,
+ LINE_MODE_PINCFG,
+ LINE_MODE_VERB,
+ LINE_MODE_HINT,
+ NUM_LINE_MODES,
+};
+
+static inline int strmatch(const char *a, const char *b)
+{
+ return strnicmp(a, b, strlen(b)) == 0;
+}
+
+/* parse the contents after the line "[codec]"
+ * accept only the line with three numbers, and assign the current codec
+ */
+static void parse_codec_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ unsigned int vendorid, subid, caddr;
+ struct hda_codec *codec;
+
+ *codecp = NULL;
+ if (sscanf(buf, "%i %i %i", &vendorid, &subid, &caddr) == 3) {
+ list_for_each_entry(codec, &bus->codec_list, list) {
+ if (codec->addr == caddr) {
+ *codecp = codec;
+ break;
+ }
+ }
+ }
+}
+
+/* parse the contents after the other command tags, [pincfg], [verb],
+ * [hint] and [model]
+ * just pass to the sysfs helper (only when any codec was specified)
+ */
+static void parse_pincfg_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ parse_user_pin_configs(*codecp, buf);
+}
+
+static void parse_verb_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ parse_init_verbs(*codecp, buf);
+}
+
+static void parse_hint_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ parse_hints(*codecp, buf);
+}
+
+static void parse_model_mode(char *buf, struct hda_bus *bus,
+ struct hda_codec **codecp)
+{
+ if (!*codecp)
+ return;
+ kfree((*codecp)->modelname);
+ (*codecp)->modelname = kstrdup(buf, GFP_KERNEL);
+}
+
+struct hda_patch_item {
+ const char *tag;
+ void (*parser)(char *buf, struct hda_bus *bus, struct hda_codec **retc);
+};
+
+static struct hda_patch_item patch_items[NUM_LINE_MODES] = {
+ [LINE_MODE_CODEC] = { "[codec]", parse_codec_mode },
+ [LINE_MODE_MODEL] = { "[model]", parse_model_mode },
+ [LINE_MODE_VERB] = { "[verb]", parse_verb_mode },
+ [LINE_MODE_PINCFG] = { "[pincfg]", parse_pincfg_mode },
+ [LINE_MODE_HINT] = { "[hint]", parse_hint_mode },
+};
+
+/* check the line starting with '[' -- change the parser mode accodingly */
+static int parse_line_mode(char *buf, struct hda_bus *bus)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(patch_items); i++) {
+ if (!patch_items[i].tag)
+ continue;
+ if (strmatch(buf, patch_items[i].tag))
+ return i;
+ }
+ return LINE_MODE_NONE;
+}
+
+/* copy one line from the buffer in fw, and update the fields in fw
+ * return zero if it reaches to the end of the buffer, or non-zero
+ * if successfully copied a line
+ *
+ * the spaces at the beginning and the end of the line are stripped
+ */
+static int get_line_from_fw(char *buf, int size, struct firmware *fw)
+{
+ int len;
+ const char *p = fw->data;
+ while (isspace(*p) && fw->size) {
+ p++;
+ fw->size--;
+ }
+ if (!fw->size)
+ return 0;
+ if (size < fw->size)
+ size = fw->size;
+
+ for (len = 0; len < fw->size; len++) {
+ if (!*p)
+ break;
+ if (*p == '\n') {
+ p++;
+ len++;
+ break;
+ }
+ if (len < size)
+ *buf++ = *p++;
+ }
+ *buf = 0;
+ fw->size -= len;
+ fw->data = p;
+ remove_trail_spaces(buf);
+ return 1;
+}
+
+/*
+ * load a "patch" firmware file and parse it
+ */
+int snd_hda_load_patch(struct hda_bus *bus, const char *patch)
+{
+ int err;
+ const struct firmware *fw;
+ struct firmware tmp;
+ char buf[128];
+ struct hda_codec *codec;
+ int line_mode;
+ struct device *dev = bus->card->dev;
+
+ if (snd_BUG_ON(!dev))
+ return -ENODEV;
+ err = request_firmware(&fw, patch, dev);
+ if (err < 0) {
+ printk(KERN_ERR "hda-codec: Cannot load the patch '%s'\n",
+ patch);
+ return err;
+ }
+
+ tmp = *fw;
+ line_mode = LINE_MODE_NONE;
+ codec = NULL;
+ while (get_line_from_fw(buf, sizeof(buf) - 1, &tmp)) {
+ if (!*buf || *buf == '#' || *buf == '\n')
+ continue;
+ if (*buf == '[')
+ line_mode = parse_line_mode(buf, bus);
+ else if (patch_items[line_mode].parser)
+ patch_items[line_mode].parser(buf, bus, &codec);
+ }
+ release_firmware(fw);
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_load_patch);
+#endif /* CONFIG_SND_HDA_PATCH_LOADER */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 175f07a..20a66f8 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -61,6 +61,9 @@
static int probe_only[SNDRV_CARDS];
static int single_cmd;
static int enable_msi;
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+static char *patch[SNDRV_CARDS];
+#endif
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
@@ -84,6 +87,10 @@
"(for debugging only).");
module_param(enable_msi, int, 0444);
MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+module_param_array(patch, charp, NULL, 0444);
+MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface.");
+#endif
#ifdef CONFIG_SND_HDA_POWER_SAVE
static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
@@ -1331,8 +1338,7 @@
[AZX_DRIVER_TERA] = 1,
};
-static int __devinit azx_codec_create(struct azx *chip, const char *model,
- int no_init)
+static int __devinit azx_codec_create(struct azx *chip, const char *model)
{
struct hda_bus_template bus_temp;
int c, codecs, err;
@@ -1391,7 +1397,7 @@
for (c = 0; c < max_slots; c++) {
if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
struct hda_codec *codec;
- err = snd_hda_codec_new(chip->bus, c, !no_init, &codec);
+ err = snd_hda_codec_new(chip->bus, c, &codec);
if (err < 0)
continue;
codecs++;
@@ -1401,7 +1407,16 @@
snd_printk(KERN_ERR SFX "no codecs initialized\n");
return -ENXIO;
}
+ return 0;
+}
+/* configure each codec instance */
+static int __devinit azx_codec_configure(struct azx *chip)
+{
+ struct hda_codec *codec;
+ list_for_each_entry(codec, &chip->bus->codec_list, list) {
+ snd_hda_codec_configure(codec);
+ }
return 0;
}
@@ -2284,6 +2299,30 @@
}
}
+/*
+ * white-list for enable_msi
+ */
+static struct snd_pci_quirk msi_white_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x103c, 0x3607, "HP Compa CQ40", 1),
+ {}
+};
+
+static void __devinit check_msi(struct azx *chip)
+{
+ const struct snd_pci_quirk *q;
+
+ chip->msi = enable_msi;
+ if (chip->msi)
+ return;
+ q = snd_pci_quirk_lookup(chip->pci, msi_white_list);
+ if (q) {
+ printk(KERN_INFO
+ "hda_intel: msi for device %04x:%04x set to %d\n",
+ q->subvendor, q->subdevice, q->value);
+ chip->msi = q->value;
+ }
+}
+
/*
* constructor
@@ -2318,7 +2357,7 @@
chip->pci = pci;
chip->irq = -1;
chip->driver_type = driver_type;
- chip->msi = enable_msi;
+ check_msi(chip);
chip->dev_index = dev;
INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work);
@@ -2526,15 +2565,32 @@
return err;
}
+ /* set this here since it's referred in snd_hda_load_patch() */
+ snd_card_set_dev(card, &pci->dev);
+
err = azx_create(card, pci, dev, pci_id->driver_data, &chip);
if (err < 0)
goto out_free;
card->private_data = chip;
/* create codec instances */
- err = azx_codec_create(chip, model[dev], probe_only[dev]);
+ err = azx_codec_create(chip, model[dev]);
if (err < 0)
goto out_free;
+#ifdef CONFIG_SND_HDA_PATCH_LOADER
+ if (patch[dev]) {
+ snd_printk(KERN_ERR SFX "Applying patch firmware '%s'\n",
+ patch[dev]);
+ err = snd_hda_load_patch(chip->bus, patch[dev]);
+ if (err < 0)
+ goto out_free;
+ }
+#endif
+ if (!probe_only[dev]) {
+ err = azx_codec_configure(chip);
+ if (err < 0)
+ goto out_free;
+ }
/* create PCM streams */
err = snd_hda_build_pcms(chip->bus);
@@ -2546,8 +2602,6 @@
if (err < 0)
goto out_free;
- snd_card_set_dev(card, &pci->dev);
-
err = snd_card_register(card);
if (err < 0)
goto out_free;
@@ -2649,11 +2703,15 @@
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC },
#endif
- /* AMD Generic, PCI class code and Vendor ID for HD Audio */
+ /* AMD/ATI Generic, PCI class code and Vendor ID for HD Audio */
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_GENERIC },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID),
+ .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+ .class_mask = 0xffffff,
+ .driver_data = AZX_DRIVER_GENERIC },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 8334901..5f1dcc5 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -99,7 +99,6 @@
int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
unsigned int *tlv, const char **slaves);
int snd_hda_codec_reset(struct hda_codec *codec);
-int snd_hda_codec_configure(struct hda_codec *codec);
/* amp value bits */
#define HDA_AMP_MUTE 0x80
@@ -408,6 +407,19 @@
return codec->wcaps[nid - codec->start_nid];
}
+/* get the widget type from widget capability bits */
+#define get_wcaps_type(wcaps) (((wcaps) & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT)
+
+static inline unsigned int get_wcaps_channels(u32 wcaps)
+{
+ unsigned int chans;
+
+ chans = (wcaps & AC_WCAP_CHAN_CNT_EXT) >> 13;
+ chans = ((chans << 1) | 1) + 1;
+
+ return chans;
+}
+
u32 query_amp_caps(struct hda_codec *codec, hda_nid_t nid, int direction);
int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
unsigned int caps);
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 418c5d1..95f24e4 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -508,17 +508,14 @@
unsigned int wid_caps =
snd_hda_param_read(codec, nid,
AC_PAR_AUDIO_WIDGET_CAP);
- unsigned int wid_type =
- (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type = get_wcaps_type(wid_caps);
hda_nid_t conn[HDA_MAX_CONNECTIONS];
int conn_len = 0;
snd_iprintf(buffer, "Node 0x%02x [%s] wcaps 0x%x:", nid,
get_wid_type_name(wid_type), wid_caps);
if (wid_caps & AC_WCAP_STEREO) {
- unsigned int chans;
- chans = (wid_caps & AC_WCAP_CHAN_CNT_EXT) >> 13;
- chans = ((chans << 1) | 1) + 1;
+ unsigned int chans = get_wcaps_channels(wid_caps);
if (chans == 2)
snd_iprintf(buffer, " Stereo");
else
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 403588c..215e72a 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -2982,7 +2982,8 @@
board_config = snd_hda_check_board_config(codec, AD1988_MODEL_LAST,
ad1988_models, ad1988_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...\n");
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = AD1988_AUTO;
}
@@ -3702,19 +3703,29 @@
* Port F: Internal speakers
*/
-static struct hda_input_mux ad1884a_laptop_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 }, /* port-B */
- { "Internal Mic", 0x1 }, /* port-C */
- { "Dock Mic", 0x4 }, /* port-E */
- { "Mix", 0x3 },
- },
-};
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+ int mute = (!ucontrol->value.integer.value[0] &&
+ !ucontrol->value.integer.value[1]);
+ /* toggle GPIO1 according to the mute state */
+ snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ mute ? 0x02 : 0x0);
+ return ret;
+}
static struct snd_kcontrol_new ad1884a_laptop_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = ad1884a_mobile_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+ },
HDA_CODEC_MUTE("Dock Playback Switch", 0x12, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
@@ -3729,36 +3740,9 @@
HDA_CODEC_VOLUME("Dock Mic Boost", 0x25, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x0d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x0d, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
{ } /* end */
};
-static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
- int mute = (!ucontrol->value.integer.value[0] &&
- !ucontrol->value.integer.value[1]);
- /* toggle GPIO1 according to the mute state */
- snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
- mute ? 0x02 : 0x0);
- return ret;
-}
-
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
/*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
@@ -3828,6 +3812,63 @@
return 0;
}
+/* mute internal speaker if HP or docking HP is plugged */
+static void ad1884a_laptop_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x11, 0, AC_VERB_GET_PIN_SENSE, 0);
+ present &= AC_PINSENSE_PRESENCE;
+ if (!present) {
+ present = snd_hda_codec_read(codec, 0x12, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ present &= AC_PINSENSE_PRESENCE;
+ }
+ snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_EAPD_BTLENABLE,
+ present ? 0x00 : 0x02);
+}
+
+/* switch to external mic if plugged */
+static void ad1884a_laptop_automic(struct hda_codec *codec)
+{
+ unsigned int idx;
+
+ if (snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0) &
+ AC_PINSENSE_PRESENCE)
+ idx = 0;
+ else if (snd_hda_codec_read(codec, 0x1c, 0, AC_VERB_GET_PIN_SENSE, 0) &
+ AC_PINSENSE_PRESENCE)
+ idx = 4;
+ else
+ idx = 1;
+ snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL, idx);
+}
+
+/* unsolicited event for HP jack sensing */
+static void ad1884a_laptop_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_laptop_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1884a_laptop_automic(codec);
+ break;
+ }
+}
+
+/* initialize jack-sensing, too */
+static int ad1884a_laptop_init(struct hda_codec *codec)
+{
+ ad198x_init(codec);
+ ad1884a_laptop_automute(codec);
+ ad1884a_laptop_automic(codec);
+ return 0;
+}
+
/* additional verbs for laptop model */
static struct hda_verb ad1884a_laptop_verbs[] = {
/* Port-A (HP) pin - always unmuted */
@@ -3844,11 +3885,19 @@
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-D (docking line-out) pin - default unmuted */
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x12, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ {0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ /* allow to touch GPIO1 (for mute control) */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
{ } /* end */
};
@@ -4008,6 +4057,7 @@
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
+ SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x7010, "HP laptop", AD1884A_MOBILE),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
{}
};
@@ -4057,9 +4107,8 @@
spec->mixers[0] = ad1884a_laptop_mixers;
spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
spec->multiout.dig_out_nid = 0;
- spec->input_mux = &ad1884a_laptop_capture_source;
- codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
- codec->patch_ops.init = ad1884a_hp_init;
+ codec->patch_ops.unsol_event = ad1884a_laptop_unsol_event;
+ codec->patch_ops.init = ad1884a_laptop_init;
/* set the upper-limit for mixer amp to 0dB for avoiding the
* possible damage by overloading
*/
diff --git a/sound/pci/hda/patch_atihdmi.c b/sound/pci/hda/patch_atihdmi.c
index 233e477..fb684f0 100644
--- a/sound/pci/hda/patch_atihdmi.c
+++ b/sound/pci/hda/patch_atihdmi.c
@@ -141,8 +141,7 @@
/* FIXME: we must check ELD and change the PCM parameters dynamically
*/
chans = get_wcaps(codec, CVT_NID);
- chans = (chans & AC_WCAP_CHAN_CNT_EXT) >> 13;
- chans = ((chans << 1) | 1) + 1;
+ chans = get_wcaps_channels(chans);
info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = chans;
return 0;
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index 019ca7c..d08353d 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -459,8 +459,7 @@
nid = codec->start_nid;
for (i = 0; i < codec->num_nodes; i++, nid++) {
unsigned int wcaps = get_wcaps(codec, nid);
- unsigned int type = (wcaps & AC_WCAP_TYPE) >>
- AC_WCAP_TYPE_SHIFT;
+ unsigned int type = get_wcaps_type(wcaps);
if (type != AC_WID_AUD_IN)
continue;
if (snd_hda_get_connections(codec, nid, &pin, 1) != 1)
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
new file mode 100644
index 0000000..8ba3068
--- /dev/null
+++ b/sound/pci/hda/patch_cirrus.c
@@ -0,0 +1,1194 @@
+/*
+ * HD audio interface patch for Cirrus Logic CS420x chip
+ *
+ * Copyright (c) 2009 Takashi Iwai <tiwai@suse.de>
+ *
+ * This driver is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <sound/core.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+/*
+ */
+
+struct cs_spec {
+ int board_config;
+ struct auto_pin_cfg autocfg;
+ struct hda_multi_out multiout;
+ struct snd_kcontrol *vmaster_sw;
+ struct snd_kcontrol *vmaster_vol;
+
+ hda_nid_t dac_nid[AUTO_CFG_MAX_OUTS];
+ hda_nid_t slave_dig_outs[2];
+
+ unsigned int input_idx[AUTO_PIN_LAST];
+ unsigned int capsrc_idx[AUTO_PIN_LAST];
+ hda_nid_t adc_nid[AUTO_PIN_LAST];
+ unsigned int adc_idx[AUTO_PIN_LAST];
+ unsigned int num_inputs;
+ unsigned int cur_input;
+ unsigned int automic_idx;
+ hda_nid_t cur_adc;
+ unsigned int cur_adc_stream_tag;
+ unsigned int cur_adc_format;
+ hda_nid_t dig_in;
+
+ struct hda_bind_ctls *capture_bind[2];
+
+ unsigned int gpio_mask;
+ unsigned int gpio_dir;
+ unsigned int gpio_data;
+
+ struct hda_pcm pcm_rec[2]; /* PCM information */
+
+ unsigned int hp_detect:1;
+ unsigned int mic_detect:1;
+};
+
+/* available models */
+enum {
+ CS420X_MBP55,
+ CS420X_AUTO,
+ CS420X_MODELS
+};
+
+/* Vendor-specific processing widget */
+#define CS420X_VENDOR_NID 0x11
+#define CS_DIG_OUT1_PIN_NID 0x10
+#define CS_DIG_OUT2_PIN_NID 0x15
+#define CS_DMIC1_PIN_NID 0x12
+#define CS_DMIC2_PIN_NID 0x0e
+
+/* coef indices */
+#define IDX_SPDIF_STAT 0x0000
+#define IDX_SPDIF_CTL 0x0001
+#define IDX_ADC_CFG 0x0002
+/* SZC bitmask, 4 modes below:
+ * 0 = immediate,
+ * 1 = digital immediate, analog zero-cross
+ * 2 = digtail & analog soft-ramp
+ * 3 = digital soft-ramp, analog zero-cross
+ */
+#define CS_COEF_ADC_SZC_MASK (3 << 0)
+#define CS_COEF_ADC_MIC_SZC_MODE (3 << 0) /* SZC setup for mic */
+#define CS_COEF_ADC_LI_SZC_MODE (3 << 0) /* SZC setup for line-in */
+/* PGA mode: 0 = differential, 1 = signle-ended */
+#define CS_COEF_ADC_MIC_PGA_MODE (1 << 5) /* PGA setup for mic */
+#define CS_COEF_ADC_LI_PGA_MODE (1 << 6) /* PGA setup for line-in */
+#define IDX_DAC_CFG 0x0003
+/* SZC bitmask, 4 modes below:
+ * 0 = Immediate
+ * 1 = zero-cross
+ * 2 = soft-ramp
+ * 3 = soft-ramp on zero-cross
+ */
+#define CS_COEF_DAC_HP_SZC_MODE (3 << 0) /* nid 0x02 */
+#define CS_COEF_DAC_LO_SZC_MODE (3 << 2) /* nid 0x03 */
+#define CS_COEF_DAC_SPK_SZC_MODE (3 << 4) /* nid 0x04 */
+
+#define IDX_BEEP_CFG 0x0004
+/* 0x0008 - test reg key */
+/* 0x0009 - 0x0014 -> 12 test regs */
+/* 0x0015 - visibility reg */
+
+
+static inline int cs_vendor_coef_get(struct hda_codec *codec, unsigned int idx)
+{
+ snd_hda_codec_write(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_SET_COEF_INDEX, idx);
+ return snd_hda_codec_read(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_GET_PROC_COEF, 0);
+}
+
+static inline void cs_vendor_coef_set(struct hda_codec *codec, unsigned int idx,
+ unsigned int coef)
+{
+ snd_hda_codec_write(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_SET_COEF_INDEX, idx);
+ snd_hda_codec_write(codec, CS420X_VENDOR_NID, 0,
+ AC_VERB_SET_PROC_COEF, coef);
+}
+
+
+#define HP_EVENT 1
+#define MIC_EVENT 2
+
+/*
+ * PCM callbacks
+ */
+static int cs_playback_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
+ hinfo);
+}
+
+static int cs_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
+ stream_tag, format, substream);
+}
+
+static int cs_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Digital out
+ */
+static int cs_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_open(codec, &spec->multiout);
+}
+
+static int cs_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int cs_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+ format, substream);
+}
+
+static int cs_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
+}
+
+/*
+ * Analog capture
+ */
+static int cs_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ spec->cur_adc = spec->adc_nid[spec->cur_input];
+ spec->cur_adc_stream_tag = stream_tag;
+ spec->cur_adc_format = format;
+ snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
+ return 0;
+}
+
+static int cs_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct cs_spec *spec = codec->spec;
+ snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ spec->cur_adc = 0;
+ return 0;
+}
+
+/*
+ */
+static struct hda_pcm_stream cs_pcm_analog_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .ops = {
+ .open = cs_playback_pcm_open,
+ .prepare = cs_playback_pcm_prepare,
+ .cleanup = cs_playback_pcm_cleanup
+ },
+};
+
+static struct hda_pcm_stream cs_pcm_analog_capture = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .ops = {
+ .prepare = cs_capture_pcm_prepare,
+ .cleanup = cs_capture_pcm_cleanup
+ },
+};
+
+static struct hda_pcm_stream cs_pcm_digital_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+ .ops = {
+ .open = cs_dig_playback_pcm_open,
+ .close = cs_dig_playback_pcm_close,
+ .prepare = cs_dig_playback_pcm_prepare,
+ .cleanup = cs_dig_playback_pcm_cleanup
+ },
+};
+
+static struct hda_pcm_stream cs_pcm_digital_capture = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
+static int cs_build_pcms(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct hda_pcm *info = spec->pcm_rec;
+
+ codec->pcm_info = info;
+ codec->num_pcms = 0;
+
+ info->name = "Cirrus Analog";
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = cs_pcm_analog_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dac_nid[0];
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max =
+ spec->multiout.max_channels;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] = cs_pcm_analog_capture;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid =
+ spec->adc_nid[spec->cur_input];
+ codec->num_pcms++;
+
+ if (!spec->multiout.dig_out_nid && !spec->dig_in)
+ return 0;
+
+ info++;
+ info->name = "Cirrus Digital";
+ info->pcm_type = spec->autocfg.dig_out_type[0];
+ if (!info->pcm_type)
+ info->pcm_type = HDA_PCM_TYPE_SPDIF;
+ if (spec->multiout.dig_out_nid) {
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+ cs_pcm_digital_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
+ spec->multiout.dig_out_nid;
+ }
+ if (spec->dig_in) {
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] =
+ cs_pcm_digital_capture;
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in;
+ }
+ codec->num_pcms++;
+
+ return 0;
+}
+
+/*
+ * parse codec topology
+ */
+
+static hda_nid_t get_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+ hda_nid_t dac;
+ if (!pin)
+ return 0;
+ if (snd_hda_get_connections(codec, pin, &dac, 1) != 1)
+ return 0;
+ return dac;
+}
+
+static int is_ext_mic(struct hda_codec *codec, unsigned int idx)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t pin = cfg->input_pins[idx];
+ unsigned int val = snd_hda_query_pin_caps(codec, pin);
+ if (!(val & AC_PINCAP_PRES_DETECT))
+ return 0;
+ val = snd_hda_codec_get_pincfg(codec, pin);
+ return (get_defcfg_connect(val) == AC_JACK_PORT_COMPLEX);
+}
+
+static hda_nid_t get_adc(struct hda_codec *codec, hda_nid_t pin,
+ unsigned int *idxp)
+{
+ int i;
+ hda_nid_t nid;
+
+ nid = codec->start_nid;
+ for (i = 0; i < codec->num_nodes; i++, nid++) {
+ hda_nid_t pins[2];
+ unsigned int type;
+ int j, nums;
+ type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
+ >> AC_WCAP_TYPE_SHIFT;
+ if (type != AC_WID_AUD_IN)
+ continue;
+ nums = snd_hda_get_connections(codec, nid, pins,
+ ARRAY_SIZE(pins));
+ if (nums <= 0)
+ continue;
+ for (j = 0; j < nums; j++) {
+ if (pins[j] == pin) {
+ *idxp = j;
+ return nid;
+ }
+ }
+ }
+ return 0;
+}
+
+static int is_active_pin(struct hda_codec *codec, hda_nid_t nid)
+{
+ unsigned int val;
+ val = snd_hda_codec_get_pincfg(codec, nid);
+ return (get_defcfg_connect(val) != AC_JACK_PORT_NONE);
+}
+
+static int parse_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i, extra_nids;
+ hda_nid_t dac;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ dac = get_dac(codec, cfg->line_out_pins[i]);
+ if (!dac)
+ break;
+ spec->dac_nid[i] = dac;
+ }
+ spec->multiout.num_dacs = i;
+ spec->multiout.dac_nids = spec->dac_nid;
+ spec->multiout.max_channels = i * 2;
+
+ /* add HP and speakers */
+ extra_nids = 0;
+ for (i = 0; i < cfg->hp_outs; i++) {
+ dac = get_dac(codec, cfg->hp_pins[i]);
+ if (!dac)
+ break;
+ if (!i)
+ spec->multiout.hp_nid = dac;
+ else
+ spec->multiout.extra_out_nid[extra_nids++] = dac;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ dac = get_dac(codec, cfg->speaker_pins[i]);
+ if (!dac)
+ break;
+ spec->multiout.extra_out_nid[extra_nids++] = dac;
+ }
+
+ if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ cfg->speaker_outs = cfg->line_outs;
+ memcpy(cfg->speaker_pins, cfg->line_out_pins,
+ sizeof(cfg->speaker_pins));
+ cfg->line_outs = 0;
+ }
+
+ return 0;
+}
+
+static int parse_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t pin = cfg->input_pins[i];
+ if (!pin)
+ continue;
+ spec->input_idx[spec->num_inputs] = i;
+ spec->capsrc_idx[i] = spec->num_inputs++;
+ spec->cur_input = i;
+ spec->adc_nid[i] = get_adc(codec, pin, &spec->adc_idx[i]);
+ }
+ if (!spec->num_inputs)
+ return 0;
+
+ /* check whether the automatic mic switch is available */
+ if (spec->num_inputs == 2 &&
+ spec->adc_nid[AUTO_PIN_MIC] && spec->adc_nid[AUTO_PIN_FRONT_MIC]) {
+ if (is_ext_mic(codec, cfg->input_pins[AUTO_PIN_FRONT_MIC])) {
+ if (!is_ext_mic(codec, cfg->input_pins[AUTO_PIN_MIC])) {
+ spec->mic_detect = 1;
+ spec->automic_idx = AUTO_PIN_FRONT_MIC;
+ }
+ } else {
+ if (is_ext_mic(codec, cfg->input_pins[AUTO_PIN_MIC])) {
+ spec->mic_detect = 1;
+ spec->automic_idx = AUTO_PIN_MIC;
+ }
+ }
+ }
+ return 0;
+}
+
+
+static int parse_digital_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t nid;
+
+ if (!cfg->dig_outs)
+ return 0;
+ if (snd_hda_get_connections(codec, cfg->dig_out_pins[0], &nid, 1) < 1)
+ return 0;
+ spec->multiout.dig_out_nid = nid;
+ spec->multiout.share_spdif = 1;
+ if (cfg->dig_outs > 1 &&
+ snd_hda_get_connections(codec, cfg->dig_out_pins[1], &nid, 1) > 0) {
+ spec->slave_dig_outs[0] = nid;
+ codec->slave_dig_outs = spec->slave_dig_outs;
+ }
+ return 0;
+}
+
+static int parse_digital_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int idx;
+
+ if (cfg->dig_in_pin)
+ spec->dig_in = get_adc(codec, cfg->dig_in_pin, &idx);
+ return 0;
+}
+
+/*
+ * create mixer controls
+ */
+
+static const char *dir_sfx[2] = { "Playback", "Capture" };
+
+static int add_mute(struct hda_codec *codec, const char *name, int index,
+ unsigned int pval, int dir, struct snd_kcontrol **kctlp)
+{
+ char tmp[44];
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_MUTE_IDX(tmp, index, 0, 0, HDA_OUTPUT);
+ knew.private_value = pval;
+ snprintf(tmp, sizeof(tmp), "%s %s Switch", name, dir_sfx[dir]);
+ *kctlp = snd_ctl_new1(&knew, codec);
+ return snd_hda_ctl_add(codec, *kctlp);
+}
+
+static int add_volume(struct hda_codec *codec, const char *name,
+ int index, unsigned int pval, int dir,
+ struct snd_kcontrol **kctlp)
+{
+ char tmp[32];
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
+ knew.private_value = pval;
+ snprintf(tmp, sizeof(tmp), "%s %s Volume", name, dir_sfx[dir]);
+ *kctlp = snd_ctl_new1(&knew, codec);
+ return snd_hda_ctl_add(codec, *kctlp);
+}
+
+static void fix_volume_caps(struct hda_codec *codec, hda_nid_t dac)
+{
+ unsigned int caps;
+
+ /* set the upper-limit for mixer amp to 0dB */
+ caps = query_amp_caps(codec, dac, HDA_OUTPUT);
+ caps &= ~(0x7f << AC_AMPCAP_NUM_STEPS_SHIFT);
+ caps |= ((caps >> AC_AMPCAP_OFFSET_SHIFT) & 0x7f)
+ << AC_AMPCAP_NUM_STEPS_SHIFT;
+ snd_hda_override_amp_caps(codec, dac, HDA_OUTPUT, caps);
+}
+
+static int add_vmaster(struct hda_codec *codec, hda_nid_t dac)
+{
+ struct cs_spec *spec = codec->spec;
+ unsigned int tlv[4];
+ int err;
+
+ spec->vmaster_sw =
+ snd_ctl_make_virtual_master("Master Playback Switch", NULL);
+ err = snd_hda_ctl_add(codec, spec->vmaster_sw);
+ if (err < 0)
+ return err;
+
+ snd_hda_set_vmaster_tlv(codec, dac, HDA_OUTPUT, tlv);
+ spec->vmaster_vol =
+ snd_ctl_make_virtual_master("Master Playback Volume", tlv);
+ err = snd_hda_ctl_add(codec, spec->vmaster_vol);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int add_output(struct hda_codec *codec, hda_nid_t dac, int idx,
+ int num_ctls, int type)
+{
+ struct cs_spec *spec = codec->spec;
+ const char *name;
+ int err, index;
+ struct snd_kcontrol *kctl;
+ static char *speakers[] = {
+ "Front Speaker", "Surround Speaker", "Bass Speaker"
+ };
+ static char *line_outs[] = {
+ "Front Line-Out", "Surround Line-Out", "Bass Line-Out"
+ };
+
+ fix_volume_caps(codec, dac);
+ if (!spec->vmaster_sw) {
+ err = add_vmaster(codec, dac);
+ if (err < 0)
+ return err;
+ }
+
+ index = 0;
+ switch (type) {
+ case AUTO_PIN_HP_OUT:
+ name = "Headphone";
+ index = idx;
+ break;
+ case AUTO_PIN_SPEAKER_OUT:
+ if (num_ctls > 1)
+ name = speakers[idx];
+ else
+ name = "Speaker";
+ break;
+ default:
+ if (num_ctls > 1)
+ name = line_outs[idx];
+ else
+ name = "Line-Out";
+ break;
+ }
+
+ err = add_mute(codec, name, index,
+ HDA_COMPOSE_AMP_VAL(dac, 3, 0, HDA_OUTPUT), 0, &kctl);
+ if (err < 0)
+ return err;
+ err = snd_ctl_add_slave(spec->vmaster_sw, kctl);
+ if (err < 0)
+ return err;
+
+ err = add_volume(codec, name, index,
+ HDA_COMPOSE_AMP_VAL(dac, 3, 0, HDA_OUTPUT), 0, &kctl);
+ if (err < 0)
+ return err;
+ err = snd_ctl_add_slave(spec->vmaster_vol, kctl);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int build_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i, err;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ err = add_output(codec, get_dac(codec, cfg->line_out_pins[i]),
+ i, cfg->line_outs, cfg->line_out_type);
+ if (err < 0)
+ return err;
+ }
+ for (i = 0; i < cfg->hp_outs; i++) {
+ err = add_output(codec, get_dac(codec, cfg->hp_pins[i]),
+ i, cfg->hp_outs, AUTO_PIN_HP_OUT);
+ if (err < 0)
+ return err;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ err = add_output(codec, get_dac(codec, cfg->speaker_pins[i]),
+ i, cfg->speaker_outs, AUTO_PIN_SPEAKER_OUT);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/*
+ */
+
+static struct snd_kcontrol_new cs_capture_ctls[] = {
+ HDA_BIND_SW("Capture Switch", 0),
+ HDA_BIND_VOL("Capture Volume", 0),
+};
+
+static int change_cur_input(struct hda_codec *codec, unsigned int idx,
+ int force)
+{
+ struct cs_spec *spec = codec->spec;
+
+ if (spec->cur_input == idx && !force)
+ return 0;
+ if (spec->cur_adc && spec->cur_adc != spec->adc_nid[idx]) {
+ /* stream is running, let's swap the current ADC */
+ snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+ spec->cur_adc = spec->adc_nid[idx];
+ snd_hda_codec_setup_stream(codec, spec->cur_adc,
+ spec->cur_adc_stream_tag, 0,
+ spec->cur_adc_format);
+ }
+ snd_hda_codec_write(codec, spec->cur_adc, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ spec->adc_idx[idx]);
+ spec->cur_input = idx;
+ return 1;
+}
+
+static int cs_capture_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs_spec *spec = codec->spec;
+ unsigned int idx;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = spec->num_inputs;
+ if (uinfo->value.enumerated.item >= spec->num_inputs)
+ uinfo->value.enumerated.item = spec->num_inputs - 1;
+ idx = spec->input_idx[uinfo->value.enumerated.item];
+ strcpy(uinfo->value.enumerated.name, auto_pin_cfg_labels[idx]);
+ return 0;
+}
+
+static int cs_capture_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs_spec *spec = codec->spec;
+ ucontrol->value.enumerated.item[0] = spec->capsrc_idx[spec->cur_input];
+ return 0;
+}
+
+static int cs_capture_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct cs_spec *spec = codec->spec;
+ unsigned int idx = ucontrol->value.enumerated.item[0];
+
+ if (idx >= spec->num_inputs)
+ return -EINVAL;
+ idx = spec->input_idx[idx];
+ return change_cur_input(codec, idx, 0);
+}
+
+static struct snd_kcontrol_new cs_capture_source = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = cs_capture_source_info,
+ .get = cs_capture_source_get,
+ .put = cs_capture_source_put,
+};
+
+static struct hda_bind_ctls *make_bind_capture(struct hda_codec *codec,
+ struct hda_ctl_ops *ops)
+{
+ struct cs_spec *spec = codec->spec;
+ struct hda_bind_ctls *bind;
+ int i, n;
+
+ bind = kzalloc(sizeof(*bind) + sizeof(long) * (spec->num_inputs + 1),
+ GFP_KERNEL);
+ if (!bind)
+ return NULL;
+ bind->ops = ops;
+ n = 0;
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (!spec->adc_nid[i])
+ continue;
+ bind->values[n++] =
+ HDA_COMPOSE_AMP_VAL(spec->adc_nid[i], 3,
+ spec->adc_idx[i], HDA_INPUT);
+ }
+ return bind;
+}
+
+static int build_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ int i, err;
+
+ if (!spec->num_inputs)
+ return 0;
+
+ /* make bind-capture */
+ spec->capture_bind[0] = make_bind_capture(codec, &snd_hda_bind_sw);
+ spec->capture_bind[1] = make_bind_capture(codec, &snd_hda_bind_vol);
+ for (i = 0; i < 2; i++) {
+ struct snd_kcontrol *kctl;
+ if (!spec->capture_bind[i])
+ return -ENOMEM;
+ kctl = snd_ctl_new1(&cs_capture_ctls[i], codec);
+ if (!kctl)
+ return -ENOMEM;
+ kctl->private_value = (long)spec->capture_bind[i];
+ err = snd_hda_ctl_add(codec, kctl);
+ if (err < 0)
+ return err;
+ }
+
+ if (spec->num_inputs > 1 && !spec->mic_detect) {
+ err = snd_hda_ctl_add(codec,
+ snd_ctl_new1(&cs_capture_source, codec));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ */
+
+static int build_digital_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ int err;
+
+ if (!spec->multiout.dig_out_nid)
+ return 0;
+
+ err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
+ if (err < 0)
+ return err;
+ err = snd_hda_create_spdif_share_sw(codec, &spec->multiout);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int build_digital_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ if (spec->dig_in)
+ return snd_hda_create_spdif_in_ctls(codec, spec->dig_in);
+ return 0;
+}
+
+/*
+ * auto-mute and auto-mic switching
+ */
+
+static void cs_automute(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int caps, present, hp_present;
+ hda_nid_t nid;
+ int i;
+
+ hp_present = 0;
+ for (i = 0; i < cfg->hp_outs; i++) {
+ nid = cfg->hp_pins[i];
+ caps = snd_hda_query_pin_caps(codec, nid);
+ if (!(caps & AC_PINCAP_PRES_DETECT))
+ continue;
+ if (caps & AC_PINCAP_TRIG_REQ)
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_SENSE, 0);
+ present = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ hp_present |= (present & AC_PINSENSE_PRESENCE) != 0;
+ if (hp_present)
+ break;
+ }
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ nid = cfg->speaker_pins[i];
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ hp_present ? 0 : PIN_OUT);
+ }
+ if (spec->board_config == CS420X_MBP55) {
+ unsigned int gpio = hp_present ? 0x02 : 0x08;
+ snd_hda_codec_write(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_DATA, gpio);
+ }
+}
+
+static void cs_automic(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t nid;
+ unsigned int caps, present;
+
+ nid = cfg->input_pins[spec->automic_idx];
+ caps = snd_hda_query_pin_caps(codec, nid);
+ if (caps & AC_PINCAP_TRIG_REQ)
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ present = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ if (present & AC_PINSENSE_PRESENCE)
+ change_cur_input(codec, spec->automic_idx, 0);
+ else {
+ unsigned int imic = (spec->automic_idx == AUTO_PIN_MIC) ?
+ AUTO_PIN_FRONT_MIC : AUTO_PIN_MIC;
+ change_cur_input(codec, imic, 0);
+ }
+}
+
+/*
+ */
+
+static void init_output(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ /* mute first */
+ for (i = 0; i < spec->multiout.num_dacs; i++)
+ snd_hda_codec_write(codec, spec->multiout.dac_nids[i], 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ if (spec->multiout.hp_nid)
+ snd_hda_codec_write(codec, spec->multiout.hp_nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ for (i = 0; i < ARRAY_SIZE(spec->multiout.extra_out_nid); i++) {
+ if (!spec->multiout.extra_out_nid[i])
+ break;
+ snd_hda_codec_write(codec, spec->multiout.extra_out_nid[i], 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ }
+
+ /* set appropriate pin controls */
+ for (i = 0; i < cfg->line_outs; i++)
+ snd_hda_codec_write(codec, cfg->line_out_pins[i], 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ for (i = 0; i < cfg->hp_outs; i++) {
+ hda_nid_t nid = cfg->hp_pins[i];
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+ if (!cfg->speaker_outs)
+ continue;
+ if (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP) {
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | HP_EVENT);
+ spec->hp_detect = 1;
+ }
+ }
+ for (i = 0; i < cfg->speaker_outs; i++)
+ snd_hda_codec_write(codec, cfg->speaker_pins[i], 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ if (spec->hp_detect)
+ cs_automute(codec);
+}
+
+static void init_input(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int coef;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ unsigned int ctl;
+ hda_nid_t pin = cfg->input_pins[i];
+ if (!pin || !spec->adc_nid[i])
+ continue;
+ /* set appropriate pin control and mute first */
+ ctl = PIN_IN;
+ if (i <= AUTO_PIN_FRONT_MIC) {
+ unsigned int caps = snd_hda_query_pin_caps(codec, pin);
+ caps >>= AC_PINCAP_VREF_SHIFT;
+ if (caps & AC_PINCAP_VREF_80)
+ ctl = PIN_VREF80;
+ }
+ snd_hda_codec_write(codec, pin, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, ctl);
+ snd_hda_codec_write(codec, spec->adc_nid[i], 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_MUTE(spec->adc_idx[i]));
+ if (spec->mic_detect && spec->automic_idx == i)
+ snd_hda_codec_write(codec, pin, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | MIC_EVENT);
+ }
+ change_cur_input(codec, spec->cur_input, 1);
+ if (spec->mic_detect)
+ cs_automic(codec);
+
+ coef = 0x000a; /* ADC1/2 - Digital and Analog Soft Ramp */
+ if (is_active_pin(codec, CS_DMIC2_PIN_NID))
+ coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */
+ if (is_active_pin(codec, CS_DMIC1_PIN_NID))
+ coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0
+ * No effect if SPDIF_OUT2 is slected in
+ * IDX_SPDIF_CTL.
+ */
+ cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
+}
+
+static struct hda_verb cs_coef_init_verbs[] = {
+ {0x11, AC_VERB_SET_PROC_STATE, 1},
+ {0x11, AC_VERB_SET_COEF_INDEX, IDX_DAC_CFG},
+ {0x11, AC_VERB_SET_PROC_COEF,
+ (0x002a /* DAC1/2/3 SZCMode Soft Ramp */
+ | 0x0040 /* Mute DACs on FIFO error */
+ | 0x1000 /* Enable DACs High Pass Filter */
+ | 0x0400 /* Disable Coefficient Auto increment */
+ )},
+ /* Beep */
+ {0x11, AC_VERB_SET_COEF_INDEX, IDX_DAC_CFG},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x0007}, /* Enable Beep thru DAC1/2/3 */
+
+ {} /* terminator */
+};
+
+/* SPDIF setup */
+static void init_digital(struct hda_codec *codec)
+{
+ unsigned int coef;
+
+ coef = 0x0002; /* SRC_MUTE soft-mute on SPDIF (if no lock) */
+ coef |= 0x0008; /* Replace with mute on error */
+ if (is_active_pin(codec, CS_DIG_OUT2_PIN_NID))
+ coef |= 0x4000; /* RX to TX1 or TX2 Loopthru / SPDIF2
+ * SPDIF_OUT2 is shared with GPIO1 and
+ * DMIC_SDA2.
+ */
+ cs_vendor_coef_set(codec, IDX_SPDIF_CTL, coef);
+}
+
+static int cs_init(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+
+ snd_hda_sequence_write(codec, cs_coef_init_verbs);
+
+ if (spec->gpio_mask) {
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_MASK,
+ spec->gpio_mask);
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DIRECTION,
+ spec->gpio_dir);
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ spec->gpio_data);
+ }
+
+ init_output(codec);
+ init_input(codec);
+ init_digital(codec);
+ return 0;
+}
+
+static int cs_build_controls(struct hda_codec *codec)
+{
+ int err;
+
+ err = build_output(codec);
+ if (err < 0)
+ return err;
+ err = build_input(codec);
+ if (err < 0)
+ return err;
+ err = build_digital_output(codec);
+ if (err < 0)
+ return err;
+ err = build_digital_input(codec);
+ if (err < 0)
+ return err;
+ return cs_init(codec);
+}
+
+static void cs_free(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ kfree(spec->capture_bind[0]);
+ kfree(spec->capture_bind[1]);
+ kfree(codec->spec);
+}
+
+static void cs_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ switch ((res >> 26) & 0x7f) {
+ case HP_EVENT:
+ cs_automute(codec);
+ break;
+ case MIC_EVENT:
+ cs_automic(codec);
+ break;
+ }
+}
+
+static struct hda_codec_ops cs_patch_ops = {
+ .build_controls = cs_build_controls,
+ .build_pcms = cs_build_pcms,
+ .init = cs_init,
+ .free = cs_free,
+ .unsol_event = cs_unsol_event,
+};
+
+static int cs_parse_auto_config(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ int err;
+
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+ if (err < 0)
+ return err;
+
+ err = parse_output(codec);
+ if (err < 0)
+ return err;
+ err = parse_input(codec);
+ if (err < 0)
+ return err;
+ err = parse_digital_output(codec);
+ if (err < 0)
+ return err;
+ err = parse_digital_input(codec);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static const char *cs420x_models[CS420X_MODELS] = {
+ [CS420X_MBP55] = "mbp55",
+ [CS420X_AUTO] = "auto",
+};
+
+
+static struct snd_pci_quirk cs420x_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x10de, 0xcb79, "MacBookPro 5,5", CS420X_MBP55),
+ {} /* terminator */
+};
+
+struct cs_pincfg {
+ hda_nid_t nid;
+ u32 val;
+};
+
+static struct cs_pincfg mbp55_pincfgs[] = {
+ { 0x09, 0x012b4030 },
+ { 0x0a, 0x90100121 },
+ { 0x0b, 0x90100120 },
+ { 0x0c, 0x400000f0 },
+ { 0x0d, 0x90a00110 },
+ { 0x0e, 0x400000f0 },
+ { 0x0f, 0x400000f0 },
+ { 0x10, 0x014be040 },
+ { 0x12, 0x400000f0 },
+ { 0x15, 0x400000f0 },
+ {} /* terminator */
+};
+
+static struct cs_pincfg *cs_pincfgs[CS420X_MODELS] = {
+ [CS420X_MBP55] = mbp55_pincfgs,
+};
+
+static void fix_pincfg(struct hda_codec *codec, int model)
+{
+ const struct cs_pincfg *cfg = cs_pincfgs[model];
+ if (!cfg)
+ return;
+ for (; cfg->nid; cfg++)
+ snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+}
+
+
+static int patch_cs420x(struct hda_codec *codec)
+{
+ struct cs_spec *spec;
+ int err;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ codec->spec = spec;
+
+ spec->board_config =
+ snd_hda_check_board_config(codec, CS420X_MODELS,
+ cs420x_models, cs420x_cfg_tbl);
+ if (spec->board_config >= 0)
+ fix_pincfg(codec, spec->board_config);
+
+ switch (spec->board_config) {
+ case CS420X_MBP55:
+ /* GPIO1 = headphones */
+ /* GPIO3 = speakers */
+ spec->gpio_mask = 0x0a;
+ spec->gpio_dir = 0x0a;
+ break;
+ }
+
+ err = cs_parse_auto_config(codec);
+ if (err < 0)
+ goto error;
+
+ codec->patch_ops = cs_patch_ops;
+
+ return 0;
+
+ error:
+ kfree(codec->spec);
+ codec->spec = NULL;
+ return err;
+}
+
+
+/*
+ * patch entries
+ */
+static struct hda_codec_preset snd_hda_preset_cirrus[] = {
+ { .id = 0x10134206, .name = "CS4206", .patch = patch_cs420x },
+ { .id = 0x10134207, .name = "CS4207", .patch = patch_cs420x },
+ {} /* terminator */
+};
+
+MODULE_ALIAS("snd-hda-codec-id:10134206");
+MODULE_ALIAS("snd-hda-codec-id:10134207");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cirrus Logic HD-audio codec");
+
+static struct hda_codec_preset_list cirrus_list = {
+ .preset = snd_hda_preset_cirrus,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_cirrus_init(void)
+{
+ return snd_hda_add_codec_preset(&cirrus_list);
+}
+
+static void __exit patch_cirrus_exit(void)
+{
+ snd_hda_delete_codec_preset(&cirrus_list);
+}
+
+module_init(patch_cirrus_init)
+module_exit(patch_cirrus_exit)
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index c921264..780e1a7 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -635,7 +635,8 @@
cmi9880_models,
cmi9880_cfg_tbl);
if (spec->board_config < 0) {
- snd_printdd(KERN_INFO "hda_codec: Unknown model for CMI9880\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
spec->board_config = CMI_AUTO; /* try everything */
}
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index ac868c5..9d899ed 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -108,6 +108,8 @@
struct hda_input_mux private_imux;
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
+ unsigned int dell_automute;
+ unsigned int port_d_mode;
};
static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo,
@@ -1908,6 +1910,480 @@
return 0;
}
+/* Conexant 5066 specific */
+
+static hda_nid_t cxt5066_dac_nids[1] = { 0x10 };
+static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 };
+static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 };
+#define CXT5066_SPDIF_OUT 0x21
+
+static struct hda_channel_mode cxt5066_modes[1] = {
+ { 2, NULL },
+};
+
+static void cxt5066_update_speaker(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ unsigned int pinctl;
+
+ snd_printdd("CXT5066: update speaker, hp_present=%d\n",
+ spec->hp_present);
+
+ /* Port A (HP) */
+ pinctl = ((spec->hp_present & 1) && spec->cur_eapd) ? PIN_HP : 0;
+ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+
+ /* Port D (HP/LO) */
+ pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
+ ? spec->port_d_mode : 0;
+ snd_hda_codec_write(codec, 0x1c, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+
+ /* CLASS_D AMP */
+ pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
+ snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl);
+
+ if (spec->dell_automute) {
+ /* DELL AIO Port Rule: PortA > PortD > IntSpk */
+ pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
+ ? PIN_OUT : 0;
+ snd_hda_codec_write(codec, 0x1c, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl);
+ }
+}
+
+/* turn on/off EAPD (+ mute HP) as a master switch */
+static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+
+ if (!cxt_eapd_put(kcontrol, ucontrol))
+ return 0;
+
+ cxt5066_update_speaker(codec);
+ return 1;
+}
+
+/* toggle input of built-in and mic jack appropriately */
+static void cxt5066_automic(struct hda_codec *codec)
+{
+ static struct hda_verb ext_mic_present[] = {
+ /* enable external mic, port B */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* switch to external mic input */
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0},
+
+ /* disable internal mic, port C */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {}
+ };
+ static struct hda_verb ext_mic_absent[] = {
+ /* enable internal mic, port C */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* switch to internal mic input */
+ {0x17, AC_VERB_SET_CONNECT_SEL, 1},
+
+ /* disable external mic, port B */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {}
+ };
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x1a, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ if (present) {
+ snd_printdd("CXT5066: external microphone detected\n");
+ snd_hda_sequence_write(codec, ext_mic_present);
+ } else {
+ snd_printdd("CXT5066: external microphone absent\n");
+ snd_hda_sequence_write(codec, ext_mic_absent);
+ }
+}
+
+/* mute internal speaker if HP is plugged */
+static void cxt5066_hp_automute(struct hda_codec *codec)
+{
+ struct conexant_spec *spec = codec->spec;
+ unsigned int portA, portD;
+
+ /* Port A */
+ portA = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0)
+ & AC_PINSENSE_PRESENCE;
+
+ /* Port D */
+ portD = (snd_hda_codec_read(codec, 0x1c, 0, AC_VERB_GET_PIN_SENSE, 0)
+ & AC_PINSENSE_PRESENCE) << 1;
+
+ spec->hp_present = !!(portA | portD);
+ snd_printdd("CXT5066: hp automute portA=%x portD=%x present=%d\n",
+ portA, portD, spec->hp_present);
+ cxt5066_update_speaker(codec);
+}
+
+/* unsolicited event for jack sensing */
+static void cxt5066_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ snd_printdd("CXT5066: unsol event %x (%x)\n", res, res >> 26);
+ switch (res >> 26) {
+ case CONEXANT_HP_EVENT:
+ cxt5066_hp_automute(codec);
+ break;
+ case CONEXANT_MIC_EVENT:
+ cxt5066_automic(codec);
+ break;
+ }
+}
+
+static const struct hda_input_mux cxt5066_analog_mic_boost = {
+ .num_items = 5,
+ .items = {
+ { "0dB", 0 },
+ { "10dB", 1 },
+ { "20dB", 2 },
+ { "30dB", 3 },
+ { "40dB", 4 },
+ },
+};
+
+static int cxt5066_mic_boost_mux_enum_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ return snd_hda_input_mux_info(&cxt5066_analog_mic_boost, uinfo);
+}
+
+static int cxt5066_mic_boost_mux_enum_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int val;
+
+ val = snd_hda_codec_read(codec, 0x17, 0,
+ AC_VERB_GET_AMP_GAIN_MUTE, AC_AMP_GET_OUTPUT);
+
+ ucontrol->value.enumerated.item[0] = val & AC_AMP_GAIN;
+ return 0;
+}
+
+static int cxt5066_mic_boost_mux_enum_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ const struct hda_input_mux *imux = &cxt5066_analog_mic_boost;
+ unsigned int idx;
+
+ if (!imux->num_items)
+ return 0;
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+
+ snd_hda_codec_write_cache(codec, 0x17, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT | AC_AMP_SET_OUTPUT |
+ imux->items[idx].index);
+
+ return 1;
+}
+
+static struct hda_input_mux cxt5066_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic B", 0 },
+ { "Mic C", 1 },
+ { "Mic E", 2 },
+ { "Mic F", 3 },
+ },
+};
+
+static struct hda_bind_ctls cxt5066_bind_capture_vol_others = {
+ .ops = &snd_hda_bind_vol,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 2, HDA_INPUT),
+ 0
+ },
+};
+
+static struct hda_bind_ctls cxt5066_bind_capture_sw_others = {
+ .ops = &snd_hda_bind_sw,
+ .values = {
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 2, HDA_INPUT),
+ 0
+ },
+};
+
+static struct snd_kcontrol_new cxt5066_mixer_master[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x10, 0x00, HDA_OUTPUT),
+ {}
+};
+
+static struct snd_kcontrol_new cxt5066_mixer_master_olpc[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK,
+ .info = snd_hda_mixer_amp_volume_info,
+ .get = snd_hda_mixer_amp_volume_get,
+ .put = snd_hda_mixer_amp_volume_put,
+ .tlv = { .c = snd_hda_mixer_amp_tlv },
+ /* offset by 28 volume steps to limit minimum gain to -46dB */
+ .private_value =
+ HDA_COMPOSE_AMP_VAL_OFS(0x10, 3, 0, HDA_OUTPUT, 28),
+ },
+ {}
+};
+
+static struct snd_kcontrol_new cxt5066_mixers[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = cxt_eapd_info,
+ .get = cxt_eapd_get,
+ .put = cxt5066_hp_master_sw_put,
+ .private_value = 0x1d,
+ },
+
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog Mic Boost Capture Enum",
+ .info = cxt5066_mic_boost_mux_enum_info,
+ .get = cxt5066_mic_boost_mux_enum_get,
+ .put = cxt5066_mic_boost_mux_enum_put,
+ },
+
+ HDA_BIND_VOL("Capture Volume", &cxt5066_bind_capture_vol_others),
+ HDA_BIND_SW("Capture Switch", &cxt5066_bind_capture_sw_others),
+ {}
+};
+
+static struct hda_verb cxt5066_init_verbs[] = {
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port B */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, /* Port C */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Port F */
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Port E */
+
+ /* Speakers */
+ {0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1f, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* HP, Amp */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1c, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* DAC1 */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Node 14 connections: 0x17 0x18 0x23 0x24 0x27 */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
+ /* no digital microphone support yet */
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Audio input selector */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x3},
+
+ /* SPDIF route: PCM */
+ {0x20, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x22, AC_VERB_SET_CONNECT_SEL, 0x0},
+
+ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x22, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+ /* EAPD */
+ {0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+
+ /* not handling these yet */
+ {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1d, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x1e, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x20, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ {0x22, AC_VERB_SET_UNSOLICITED_ENABLE, 0},
+ { } /* end */
+};
+
+static struct hda_verb cxt5066_init_verbs_olpc[] = {
+ /* Port A: headphones */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* Port B: external microphone */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* Port C: internal microphone */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+
+ /* Port D: unused */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Port E: unused, but has primary EAPD */
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+
+ /* Port F: unused */
+ {0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Port G: internal speakers */
+ {0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1f, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+ /* DAC1 */
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* DAC2: unused */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x50},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+
+ /* Disable digital microphone port */
+ {0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* Audio input selectors */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x3},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+
+ /* Disable SPDIF */
+ {0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+ {0x22, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+ /* enable unsolicited events for Port A and B */
+ {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+ {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
+ { } /* end */
+};
+
+static struct hda_verb cxt5066_init_verbs_portd_lo[] = {
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ { } /* end */
+};
+
+/* initialize jack-sensing, too */
+static int cxt5066_init(struct hda_codec *codec)
+{
+ snd_printdd("CXT5066: init\n");
+ conexant_init(codec);
+ if (codec->patch_ops.unsol_event) {
+ cxt5066_hp_automute(codec);
+ cxt5066_automic(codec);
+ }
+ return 0;
+}
+
+enum {
+ CXT5066_LAPTOP, /* Laptops w/ EAPD support */
+ CXT5066_DELL_LAPTOP, /* Dell Laptop */
+ CXT5066_OLPC_XO_1_5, /* OLPC XO 1.5 */
+ CXT5066_MODELS
+};
+
+static const char *cxt5066_models[CXT5066_MODELS] = {
+ [CXT5066_LAPTOP] = "laptop",
+ [CXT5066_DELL_LAPTOP] = "dell-laptop",
+ [CXT5066_OLPC_XO_1_5] = "olpc-xo-1_5",
+};
+
+static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
+ CXT5066_LAPTOP),
+ SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
+ CXT5066_DELL_LAPTOP),
+ {}
+};
+
+static int patch_cxt5066(struct hda_codec *codec)
+{
+ struct conexant_spec *spec;
+ int board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ codec->spec = spec;
+
+ codec->patch_ops = conexant_patch_ops;
+ codec->patch_ops.init = cxt5066_init;
+
+ spec->dell_automute = 0;
+ spec->multiout.max_channels = 2;
+ spec->multiout.num_dacs = ARRAY_SIZE(cxt5066_dac_nids);
+ spec->multiout.dac_nids = cxt5066_dac_nids;
+ spec->multiout.dig_out_nid = CXT5066_SPDIF_OUT;
+ spec->num_adc_nids = 1;
+ spec->adc_nids = cxt5066_adc_nids;
+ spec->capsrc_nids = cxt5066_capsrc_nids;
+ spec->input_mux = &cxt5066_capture_source;
+
+ spec->port_d_mode = PIN_HP;
+
+ spec->num_init_verbs = 1;
+ spec->init_verbs[0] = cxt5066_init_verbs;
+ spec->num_channel_mode = ARRAY_SIZE(cxt5066_modes);
+ spec->channel_mode = cxt5066_modes;
+ spec->cur_adc = 0;
+ spec->cur_adc_idx = 0;
+
+ board_config = snd_hda_check_board_config(codec, CXT5066_MODELS,
+ cxt5066_models, cxt5066_cfg_tbl);
+ switch (board_config) {
+ default:
+ case CXT5066_LAPTOP:
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+ break;
+ case CXT5066_DELL_LAPTOP:
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+
+ spec->port_d_mode = PIN_OUT;
+ spec->init_verbs[spec->num_init_verbs] = cxt5066_init_verbs_portd_lo;
+ spec->num_init_verbs++;
+ spec->dell_automute = 1;
+ break;
+ case CXT5066_OLPC_XO_1_5:
+ codec->patch_ops.unsol_event = cxt5066_unsol_event;
+ spec->init_verbs[0] = cxt5066_init_verbs_olpc;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc;
+ spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+ spec->port_d_mode = 0;
+
+ /* no S/PDIF out */
+ spec->multiout.dig_out_nid = 0;
+
+ /* input source automatically selected */
+ spec->input_mux = NULL;
+ break;
+ }
+
+ return 0;
+}
/*
*/
@@ -1919,12 +2395,15 @@
.patch = patch_cxt5047 },
{ .id = 0x14f15051, .name = "CX20561 (Hermosa)",
.patch = patch_cxt5051 },
+ { .id = 0x14f15066, .name = "CX20582 (Pebble)",
+ .patch = patch_cxt5066 },
{} /* terminator */
};
MODULE_ALIAS("snd-hda-codec-id:14f15045");
MODULE_ALIAS("snd-hda-codec-id:14f15047");
MODULE_ALIAS("snd-hda-codec-id:14f15051");
+MODULE_ALIAS("snd-hda-codec-id:14f15066");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Conexant HD-audio codec");
diff --git a/sound/pci/hda/patch_intelhdmi.c b/sound/pci/hda/patch_intelhdmi.c
index fcc77fe..01a18ed 100644
--- a/sound/pci/hda/patch_intelhdmi.c
+++ b/sound/pci/hda/patch_intelhdmi.c
@@ -33,8 +33,8 @@
#include "hda_codec.h"
#include "hda_local.h"
-#define CVT_NID 0x02 /* audio converter */
-#define PIN_NID 0x03 /* HDMI output pin */
+static hda_nid_t cvt_nid; /* audio converter */
+static hda_nid_t pin_nid; /* HDMI output pin */
#define INTEL_HDMI_EVENT_TAG 0x08
@@ -44,30 +44,6 @@
struct hdmi_eld sink_eld;
};
-static struct hda_verb pinout_enable_verb[] = {
- {PIN_NID, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {} /* terminator */
-};
-
-static struct hda_verb unsolicited_response_verb[] = {
- {PIN_NID, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN |
- INTEL_HDMI_EVENT_TAG},
- {}
-};
-
-static struct hda_verb def_chan_map[] = {
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x00},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x11},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x22},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x33},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x44},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x55},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x66},
- {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x77},
- {}
-};
-
-
struct hdmi_audio_infoframe {
u8 type; /* 0x84 */
u8 ver; /* 0x01 */
@@ -244,11 +220,12 @@
static void hdmi_enable_output(struct hda_codec *codec)
{
/* Unmute */
- if (get_wcaps(codec, PIN_NID) & AC_WCAP_OUT_AMP)
- snd_hda_codec_write(codec, PIN_NID, 0,
+ if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
+ snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
/* Enable pin out */
- snd_hda_sequence_write(codec, pinout_enable_verb);
+ snd_hda_codec_write(codec, pin_nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
}
/*
@@ -256,8 +233,8 @@
*/
static void hdmi_start_infoframe_trans(struct hda_codec *codec)
{
- hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
- snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+ hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+ snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
AC_DIPXMIT_BEST);
}
@@ -266,20 +243,20 @@
*/
static void hdmi_stop_infoframe_trans(struct hda_codec *codec)
{
- hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
- snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+ hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+ snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
AC_DIPXMIT_DISABLE);
}
static int hdmi_get_channel_count(struct hda_codec *codec)
{
- return 1 + snd_hda_codec_read(codec, CVT_NID, 0,
+ return 1 + snd_hda_codec_read(codec, cvt_nid, 0,
AC_VERB_GET_CVT_CHAN_COUNT, 0);
}
static void hdmi_set_channel_count(struct hda_codec *codec, int chs)
{
- snd_hda_codec_write(codec, CVT_NID, 0,
+ snd_hda_codec_write(codec, cvt_nid, 0,
AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
if (chs != hdmi_get_channel_count(codec))
@@ -294,7 +271,7 @@
int slot;
for (i = 0; i < 8; i++) {
- slot = snd_hda_codec_read(codec, CVT_NID, 0,
+ slot = snd_hda_codec_read(codec, cvt_nid, 0,
AC_VERB_GET_HDMI_CHAN_SLOT, i);
printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
slot >> 4, slot & 0x7);
@@ -307,7 +284,7 @@
struct intel_hdmi_spec *spec = codec->spec;
struct hdmi_eld *eld = &spec->sink_eld;
- if (!snd_hdmi_get_eld(eld, codec, PIN_NID))
+ if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
}
@@ -322,11 +299,11 @@
int i;
int size;
- size = snd_hdmi_get_eld_size(codec, PIN_NID);
+ size = snd_hdmi_get_eld_size(codec, pin_nid);
printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
for (i = 0; i < 8; i++) {
- size = snd_hda_codec_read(codec, PIN_NID, 0,
+ size = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_SIZE, i);
printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
}
@@ -340,15 +317,15 @@
int size;
int pi, bi;
for (i = 0; i < 8; i++) {
- size = snd_hda_codec_read(codec, PIN_NID, 0,
+ size = snd_hda_codec_read(codec, pin_nid, 0,
AC_VERB_GET_HDMI_DIP_SIZE, i);
if (size == 0)
continue;
- hdmi_set_dip_index(codec, PIN_NID, i, 0x0);
+ hdmi_set_dip_index(codec, pin_nid, i, 0x0);
for (j = 1; j < 1000; j++) {
- hdmi_write_dip_byte(codec, PIN_NID, 0x0);
- hdmi_get_dip_index(codec, PIN_NID, &pi, &bi);
+ hdmi_write_dip_byte(codec, pin_nid, 0x0);
+ hdmi_get_dip_index(codec, pin_nid, &pi, &bi);
if (pi != i)
snd_printd(KERN_INFO "dip index %d: %d != %d\n",
bi, pi, i);
@@ -376,9 +353,9 @@
sum += params[i];
ai->checksum = - sum;
- hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+ hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
for (i = 0; i < sizeof(ai); i++)
- hdmi_write_dip_byte(codec, PIN_NID, params[i]);
+ hdmi_write_dip_byte(codec, pin_nid, params[i]);
}
/*
@@ -465,6 +442,8 @@
static void hdmi_setup_channel_mapping(struct hda_codec *codec,
struct hdmi_audio_infoframe *ai)
{
+ int i;
+
if (!ai->CA)
return;
@@ -473,7 +452,11 @@
* ALSA sequence is front/surr/clfe/side?
*/
- snd_hda_sequence_write(codec, def_chan_map);
+ for (i = 0; i < 8; i++)
+ snd_hda_codec_write(codec, cvt_nid, 0,
+ AC_VERB_SET_HDMI_CHAN_SLOT,
+ (i << 4) | i);
+
hdmi_debug_channel_mapping(codec);
}
@@ -597,7 +580,6 @@
.substreams = 1,
.channels_min = 2,
.channels_max = 8,
- .nid = CVT_NID, /* NID to query formats and rates and setup streams */
.ops = {
.open = intel_hdmi_playback_pcm_open,
.close = intel_hdmi_playback_pcm_close,
@@ -613,6 +595,9 @@
codec->num_pcms = 1;
codec->pcm_info = info;
+ /* NID to query formats and rates and setup streams */
+ intel_hdmi_pcm_playback.nid = cvt_nid;
+
info->name = "INTEL HDMI";
info->pcm_type = HDA_PCM_TYPE_HDMI;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = intel_hdmi_pcm_playback;
@@ -636,8 +621,9 @@
{
hdmi_enable_output(codec);
- snd_hda_sequence_write(codec, unsolicited_response_verb);
-
+ snd_hda_codec_write(codec, pin_nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | INTEL_HDMI_EVENT_TAG);
return 0;
}
@@ -657,7 +643,7 @@
.unsol_event = intel_hdmi_unsol_event,
};
-static int patch_intel_hdmi(struct hda_codec *codec)
+static int do_patch_intel_hdmi(struct hda_codec *codec)
{
struct intel_hdmi_spec *spec;
@@ -667,7 +653,7 @@
spec->multiout.num_dacs = 0; /* no analog */
spec->multiout.max_channels = 8;
- spec->multiout.dig_out_nid = CVT_NID;
+ spec->multiout.dig_out_nid = cvt_nid;
codec->spec = spec;
codec->patch_ops = intel_hdmi_patch_ops;
@@ -679,12 +665,27 @@
return 0;
}
+static int patch_intel_hdmi(struct hda_codec *codec)
+{
+ cvt_nid = 0x02;
+ pin_nid = 0x03;
+ return do_patch_intel_hdmi(codec);
+}
+
+static int patch_intel_hdmi_ibexpeak(struct hda_codec *codec)
+{
+ cvt_nid = 0x02;
+ pin_nid = 0x04;
+ return do_patch_intel_hdmi(codec);
+}
+
static struct hda_codec_preset snd_hda_preset_intelhdmi[] = {
{ .id = 0x808629fb, .name = "G45 DEVCL", .patch = patch_intel_hdmi },
{ .id = 0x80862801, .name = "G45 DEVBLC", .patch = patch_intel_hdmi },
{ .id = 0x80862802, .name = "G45 DEVCTG", .patch = patch_intel_hdmi },
{ .id = 0x80862803, .name = "G45 DEVELK", .patch = patch_intel_hdmi },
{ .id = 0x80862804, .name = "G45 DEVIBX", .patch = patch_intel_hdmi },
+ { .id = 0x80860054, .name = "Q57 DEVIBX", .patch = patch_intel_hdmi_ibexpeak },
{ .id = 0x10951392, .name = "SiI1392 HDMI", .patch = patch_intel_hdmi },
{} /* terminator */
};
@@ -694,6 +695,7 @@
MODULE_ALIAS("snd-hda-codec-id:80862802");
MODULE_ALIAS("snd-hda-codec-id:80862803");
MODULE_ALIAS("snd-hda-codec-id:80862804");
+MODULE_ALIAS("snd-hda-codec-id:80860054");
MODULE_ALIAS("snd-hda-codec-id:10951392");
MODULE_LICENSE("GPL");
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index f5792e2..c8435c9 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -377,6 +377,7 @@
*/
static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+ { .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
@@ -385,6 +386,7 @@
};
MODULE_ALIAS("snd-hda-codec-id:10de0002");
+MODULE_ALIAS("snd-hda-codec-id:10de0003");
MODULE_ALIAS("snd-hda-codec-id:10de0006");
MODULE_ALIAS("snd-hda-codec-id:10de0007");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6f683e4..7ed47f6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -208,12 +208,6 @@
ALC885_MBP3,
ALC885_MB5,
ALC885_IMAC24,
- ALC882_AUTO,
- ALC882_MODEL_LAST,
-};
-
-/* ALC883 models */
-enum {
ALC883_3ST_2ch_DIG,
ALC883_3ST_6ch_DIG,
ALC883_3ST_6ch,
@@ -226,6 +220,7 @@
ALC888_ACER_ASPIRE_4930G,
ALC888_ACER_ASPIRE_6530G,
ALC888_ACER_ASPIRE_8930G,
+ ALC888_ACER_ASPIRE_7730G,
ALC883_MEDION,
ALC883_MEDION_MD2,
ALC883_LAPTOP_EAPD,
@@ -237,17 +232,20 @@
ALC888_3ST_HP,
ALC888_6ST_DELL,
ALC883_MITAC,
+ ALC883_CLEVO_M540R,
ALC883_CLEVO_M720,
ALC883_FUJITSU_PI2515,
ALC888_FUJITSU_XA3530,
ALC883_3ST_6ch_INTEL,
+ ALC889A_INTEL,
+ ALC889_INTEL,
ALC888_ASUS_M90V,
ALC888_ASUS_EEE1601,
ALC889A_MB31,
ALC1200_ASUS_P5Q,
ALC883_SONY_VAIO_TT,
- ALC883_AUTO,
- ALC883_MODEL_LAST,
+ ALC882_AUTO,
+ ALC882_MODEL_LAST,
};
/* for GPIO Poll */
@@ -262,6 +260,14 @@
ALC_INIT_GPIO3,
};
+struct alc_mic_route {
+ hda_nid_t pin;
+ unsigned char mux_idx;
+ unsigned char amix_idx;
+};
+
+#define MUX_IDX_UNDEF ((unsigned char)-1)
+
struct alc_spec {
/* codec parameterization */
struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
@@ -304,6 +310,8 @@
unsigned int num_mux_defs;
const struct hda_input_mux *input_mux;
unsigned int cur_mux[3];
+ struct alc_mic_route ext_mic;
+ struct alc_mic_route int_mic;
/* channel model */
const struct hda_channel_mode *channel_mode;
@@ -320,6 +328,8 @@
struct snd_array kctls;
struct hda_input_mux private_imux[3];
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
+ hda_nid_t private_adc_nids[AUTO_CFG_MAX_OUTS];
+ hda_nid_t private_capsrc_nids[AUTO_CFG_MAX_OUTS];
/* hooks */
void (*init_hook)(struct hda_codec *codec);
@@ -329,6 +339,7 @@
unsigned int sense_updated: 1;
unsigned int jack_present: 1;
unsigned int master_sw: 1;
+ unsigned int auto_mic:1;
/* other flags */
unsigned int no_analog :1; /* digital I/O only */
@@ -370,6 +381,7 @@
unsigned int num_mux_defs;
const struct hda_input_mux *input_mux;
void (*unsol_event)(struct hda_codec *, unsigned int);
+ void (*setup)(struct hda_codec *);
void (*init_hook)(struct hda_codec *);
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_amp_list *loopbacks;
@@ -417,7 +429,7 @@
mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
imux = &spec->input_mux[mux_idx];
- type = (get_wcaps(codec, nid) & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_AUD_MIX) {
/* Matrix-mixer style (e.g. ALC882) */
unsigned int *cur_val = &spec->cur_mux[adc_idx];
@@ -842,9 +854,10 @@
/*
* set up from the preset table
*/
-static void setup_preset(struct alc_spec *spec,
+static void setup_preset(struct hda_codec *codec,
const struct alc_config_preset *preset)
{
+ struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
@@ -886,6 +899,9 @@
#ifdef CONFIG_SND_HDA_POWER_SAVE
spec->loopback.amplist = preset->loopbacks;
#endif
+
+ if (preset->setup)
+ preset->setup(codec);
}
/* Enable GPIO mask and set output */
@@ -965,30 +981,64 @@
}
}
-#if 0 /* it's broken in some cases -- temporarily disabled */
+static int get_connection_index(struct hda_codec *codec, hda_nid_t mux,
+ hda_nid_t nid)
+{
+ hda_nid_t conn[HDA_MAX_NUM_INPUTS];
+ int i, nums;
+
+ nums = snd_hda_get_connections(codec, mux, conn, ARRAY_SIZE(conn));
+ for (i = 0; i < nums; i++)
+ if (conn[i] == nid)
+ return i;
+ return -1;
+}
+
static void alc_mic_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int present;
- unsigned int mic_nid = spec->autocfg.input_pins[AUTO_PIN_MIC];
- unsigned int fmic_nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC];
- unsigned int mix_nid = spec->capsrc_nids[0];
- unsigned int capsrc_idx_mic, capsrc_idx_fmic;
+ struct alc_mic_route *dead, *alive;
+ unsigned int present, type;
+ hda_nid_t cap_nid;
- capsrc_idx_mic = mic_nid - 0x18;
- capsrc_idx_fmic = fmic_nid - 0x18;
- present = snd_hda_codec_read(codec, mic_nid, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, mix_nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (capsrc_idx_mic << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, mix_nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (capsrc_idx_fmic << 8) | (present ? 0x80 : 0));
- snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, capsrc_idx_fmic,
- HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ if (!spec->auto_mic)
+ return;
+ if (!spec->int_mic.pin || !spec->ext_mic.pin)
+ return;
+ if (snd_BUG_ON(!spec->adc_nids))
+ return;
+
+ cap_nid = spec->capsrc_nids ? spec->capsrc_nids[0] : spec->adc_nids[0];
+
+ present = snd_hda_codec_read(codec, spec->ext_mic.pin, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ present &= AC_PINSENSE_PRESENCE;
+ if (present) {
+ alive = &spec->ext_mic;
+ dead = &spec->int_mic;
+ } else {
+ alive = &spec->int_mic;
+ dead = &spec->ext_mic;
+ }
+
+ type = get_wcaps_type(get_wcaps(codec, cap_nid));
+ if (type == AC_WID_AUD_MIX) {
+ /* Matrix-mixer style (e.g. ALC882) */
+ snd_hda_codec_amp_stereo(codec, cap_nid, HDA_INPUT,
+ alive->mux_idx,
+ HDA_AMP_MUTE, 0);
+ snd_hda_codec_amp_stereo(codec, cap_nid, HDA_INPUT,
+ dead->mux_idx,
+ HDA_AMP_MUTE, HDA_AMP_MUTE);
+ } else {
+ /* MUX style (e.g. ALC880) */
+ snd_hda_codec_write_cache(codec, cap_nid, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ alive->mux_idx);
+ }
+
+ /* FIXME: analog mixer */
}
-#else
-#define alc_mic_automute(codec) do {} while(0) /* NOP */
-#endif /* disabled */
/* unsolicited event for HP jack sensing */
static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res)
@@ -1031,6 +1081,16 @@
AC_VERB_SET_PROC_COEF, 0x3030);
}
+static void alc889_coef_init(struct hda_codec *codec)
+{
+ unsigned int tmp;
+
+ snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
+ tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
+ snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7);
+ snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010);
+}
+
static void alc_auto_init_amp(struct hda_codec *codec, int type)
{
unsigned int tmp;
@@ -1088,15 +1148,7 @@
case 0x10ec0885:
case 0x10ec0887:
case 0x10ec0889:
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_COEF_INDEX, 7);
- tmp = snd_hda_codec_read(codec, 0x20, 0,
- AC_VERB_GET_PROC_COEF, 0);
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_COEF_INDEX, 7);
- snd_hda_codec_write(codec, 0x20, 0,
- AC_VERB_SET_PROC_COEF,
- tmp | 0x2010);
+ alc889_coef_init(codec);
break;
case 0x10ec0888:
alc888_coef_init(codec);
@@ -1142,6 +1194,55 @@
spec->unsol_event = alc_sku_unsol_event;
}
+static void alc_init_auto_mic(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t fixed, ext;
+ int i;
+
+ /* there must be only two mic inputs exclusively */
+ for (i = AUTO_PIN_LINE; i < AUTO_PIN_LAST; i++)
+ if (cfg->input_pins[i])
+ return;
+
+ fixed = ext = 0;
+ for (i = AUTO_PIN_MIC; i <= AUTO_PIN_FRONT_MIC; i++) {
+ hda_nid_t nid = cfg->input_pins[i];
+ unsigned int defcfg;
+ if (!nid)
+ return;
+ defcfg = snd_hda_codec_get_pincfg(codec, nid);
+ switch (get_defcfg_connect(defcfg)) {
+ case AC_JACK_PORT_FIXED:
+ if (fixed)
+ return; /* already occupied */
+ fixed = nid;
+ break;
+ case AC_JACK_PORT_COMPLEX:
+ if (ext)
+ return; /* already occupied */
+ ext = nid;
+ break;
+ default:
+ return; /* invalid entry */
+ }
+ }
+ if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
+ return; /* no unsol support */
+ snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n",
+ ext, fixed);
+ spec->ext_mic.pin = ext;
+ spec->int_mic.pin = fixed;
+ spec->ext_mic.mux_idx = MUX_IDX_UNDEF; /* set later */
+ spec->int_mic.mux_idx = MUX_IDX_UNDEF; /* set later */
+ spec->auto_mic = 1;
+ snd_hda_codec_write_cache(codec, spec->ext_mic.pin, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | ALC880_MIC_EVENT);
+ spec->unsol_event = alc_sku_unsol_event;
+}
+
/* check subsystem ID and set up device-specific initialization;
* return 1 if initialized, 0 if invalid SSID
*/
@@ -1243,6 +1344,7 @@
}
alc_init_auto_hp(codec);
+ alc_init_auto_mic(codec);
return 1;
}
@@ -1255,6 +1357,7 @@
"Enable default setup for auto mode as fallback\n");
spec->init_amp = ALC_INIT_DEFAULT;
alc_init_auto_hp(codec);
+ alc_init_auto_mic(codec);
}
}
@@ -1436,7 +1539,25 @@
alc_automute_amp(codec);
}
-static void alc888_fujitsu_xa3530_init_hook(struct hda_codec *codec)
+static void alc889_automute_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x16;
+ spec->autocfg.speaker_pins[2] = 0x17;
+ spec->autocfg.speaker_pins[3] = 0x19;
+ spec->autocfg.speaker_pins[4] = 0x1a;
+}
+
+static void alc889_intel_init_hook(struct hda_codec *codec)
+{
+ alc889_coef_init(codec);
+ alc_automute_amp(codec);
+}
+
+static void alc888_fujitsu_xa3530_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -1444,7 +1565,6 @@
spec->autocfg.hp_pins[1] = 0x1b; /* hp */
spec->autocfg.speaker_pins[0] = 0x14; /* speaker */
spec->autocfg.speaker_pins[1] = 0x15; /* bass */
- alc_automute_amp(codec);
}
/*
@@ -1643,16 +1763,15 @@
{ } /* end */
};
-static void alc888_acer_aspire_4930g_init_hook(struct hda_codec *codec)
+static void alc888_acer_aspire_4930g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
-static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec)
+static void alc888_acer_aspire_6530g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -1660,10 +1779,9 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x17;
- alc_automute_amp(codec);
}
-static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
+static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -1671,7 +1789,6 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x1b;
- alc_automute_amp(codec);
}
/*
@@ -2651,13 +2768,17 @@
snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
}
-static void alc880_uniwill_init_hook(struct hda_codec *codec)
+static void alc880_uniwill_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x16;
+}
+
+static void alc880_uniwill_init_hook(struct hda_codec *codec)
+{
alc_automute_amp(codec);
alc880_uniwill_mic_automute(codec);
}
@@ -2678,13 +2799,12 @@
}
}
-static void alc880_uniwill_p53_init_hook(struct hda_codec *codec)
+static void alc880_uniwill_p53_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
@@ -2947,13 +3067,12 @@
};
/* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_init_hook(struct hda_codec *codec)
+static void alc880_lg_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x17;
- alc_automute_amp(codec);
}
/*
@@ -3032,13 +3151,12 @@
};
/* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_lw_init_hook(struct hda_codec *codec)
+static void alc880_lg_lw_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
static struct snd_kcontrol_new alc880_medion_rim_mixer[] = {
@@ -3104,13 +3222,12 @@
alc880_medion_rim_automute(codec);
}
-static void alc880_medion_rim_init_hook(struct hda_codec *codec)
+static void alc880_medion_rim_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- alc880_medion_rim_automute(codec);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -3977,7 +4094,8 @@
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_f1734_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
- .init_hook = alc880_uniwill_p53_init_hook,
+ .setup = alc880_uniwill_p53_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_ASUS] = {
.mixers = { alc880_asus_mixer },
@@ -4054,6 +4172,7 @@
.need_dac_fix = 1,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_unsol_event,
+ .setup = alc880_uniwill_setup,
.init_hook = alc880_uniwill_init_hook,
},
[ALC880_UNIWILL_P53] = {
@@ -4066,7 +4185,8 @@
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
- .init_hook = alc880_uniwill_p53_init_hook,
+ .setup = alc880_uniwill_p53_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_FUJITSU] = {
.mixers = { alc880_fujitsu_mixer },
@@ -4080,7 +4200,8 @@
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
- .init_hook = alc880_uniwill_p53_init_hook,
+ .setup = alc880_uniwill_p53_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_CLEVO] = {
.mixers = { alc880_three_stack_mixer },
@@ -4106,7 +4227,8 @@
.need_dac_fix = 1,
.input_mux = &alc880_lg_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc880_lg_init_hook,
+ .setup = alc880_lg_setup,
+ .init_hook = alc_automute_amp,
#ifdef CONFIG_SND_HDA_POWER_SAVE
.loopbacks = alc880_lg_loopbacks,
#endif
@@ -4122,7 +4244,8 @@
.channel_mode = alc880_lg_lw_modes,
.input_mux = &alc880_lg_lw_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc880_lg_lw_init_hook,
+ .setup = alc880_lg_lw_setup,
+ .init_hook = alc_automute_amp,
},
[ALC880_MEDION_RIM] = {
.mixers = { alc880_medion_rim_mixer },
@@ -4136,7 +4259,8 @@
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_medion_rim_capture_source,
.unsol_event = alc880_medion_rim_unsol_event,
- .init_hook = alc880_medion_rim_init_hook,
+ .setup = alc880_medion_rim_setup,
+ .init_hook = alc880_medion_rim_automute,
},
#ifdef CONFIG_SND_DEBUG
[ALC880_TEST] = {
@@ -4189,8 +4313,6 @@
#define alc880_fixed_pin_idx(nid) ((nid) - 0x14)
#define alc880_is_multi_pin(nid) ((nid) >= 0x18)
#define alc880_multi_pin_idx(nid) ((nid) - 0x18)
-#define alc880_is_input_pin(nid) ((nid) >= 0x18)
-#define alc880_input_pin_idx(nid) ((nid) - 0x18)
#define alc880_idx_to_dac(nid) ((nid) + 0x02)
#define alc880_dac_to_idx(nid) ((nid) - 0x02)
#define alc880_idx_to_mixer(nid) ((nid) + 0x0c)
@@ -4278,13 +4400,19 @@
if (err < 0)
return err;
} else {
- sprintf(name, "%s Playback Volume", chname[i]);
+ const char *pfx;
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = chname[i];
+ sprintf(name, "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0,
HDA_OUTPUT));
if (err < 0)
return err;
- sprintf(name, "%s Playback Switch", chname[i]);
+ sprintf(name, "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 2,
HDA_INPUT));
@@ -4358,31 +4486,61 @@
return 0;
}
-/* create playback/capture controls for input pins */
-static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
+static int alc_is_input_pin(struct hda_codec *codec, hda_nid_t nid)
{
+ unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
+ return (pincap & AC_PINCAP_IN) != 0;
+}
+
+/* create playback/capture controls for input pins */
+static int alc_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg,
+ hda_nid_t mixer,
+ hda_nid_t cap1, hda_nid_t cap2)
+{
+ struct alc_spec *spec = codec->spec;
struct hda_input_mux *imux = &spec->private_imux[0];
int i, err, idx;
for (i = 0; i < AUTO_PIN_LAST; i++) {
- if (alc880_is_input_pin(cfg->input_pins[i])) {
- idx = alc880_input_pin_idx(cfg->input_pins[i]);
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i],
- idx, 0x0b);
- if (err < 0)
- return err;
+ hda_nid_t pin;
+
+ pin = cfg->input_pins[i];
+ if (!alc_is_input_pin(codec, pin))
+ continue;
+
+ if (mixer) {
+ idx = get_connection_index(codec, mixer, pin);
+ if (idx >= 0) {
+ err = new_analog_input(spec, pin,
+ auto_pin_cfg_labels[i],
+ idx, mixer);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (!cap1)
+ continue;
+ idx = get_connection_index(codec, cap1, pin);
+ if (idx < 0 && cap2)
+ idx = get_connection_index(codec, cap2, pin);
+ if (idx >= 0) {
imux->items[imux->num_items].label =
auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index =
- alc880_input_pin_idx(cfg->input_pins[i]);
+ imux->items[imux->num_items].index = idx;
imux->num_items++;
}
}
return 0;
}
+static int alc880_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x08, 0x09);
+}
+
static void alc_set_pin_output(struct hda_codec *codec, hda_nid_t nid,
unsigned int pin_type)
{
@@ -4448,7 +4606,7 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc880_is_input_pin(nid)) {
+ if (alc_is_input_pin(codec, nid)) {
alc_set_input_pin(codec, nid, i);
if (nid != ALC880_PIN_CD_NID &&
(get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
@@ -4491,7 +4649,7 @@
"Headphone");
if (err < 0)
return err;
- err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc880_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -4505,12 +4663,6 @@
&dig_nid, 1);
if (err < 0)
continue;
- if (dig_nid > 0x7f) {
- printk(KERN_ERR "alc880_auto: invalid dig_nid "
- "connection 0x%x for NID 0x%x\n", dig_nid,
- spec->autocfg.dig_out_pins[i]);
- continue;
- }
if (!i)
spec->multiout.dig_out_nid = dig_nid;
else {
@@ -4547,8 +4699,42 @@
alc_inithook(codec);
}
-static void set_capture_mixer(struct alc_spec *spec)
+/* check the ADC/MUX contains all input pins; some ADC/MUX contains only
+ * one of two digital mic pins, e.g. on ALC272
+ */
+static void fixup_automic_adc(struct hda_codec *codec)
{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ hda_nid_t cap = spec->capsrc_nids ?
+ spec->capsrc_nids[i] : spec->adc_nids[i];
+ int iidx, eidx;
+
+ iidx = get_connection_index(codec, cap, spec->int_mic.pin);
+ if (iidx < 0)
+ continue;
+ eidx = get_connection_index(codec, cap, spec->ext_mic.pin);
+ if (eidx < 0)
+ continue;
+ spec->int_mic.mux_idx = iidx;
+ spec->ext_mic.mux_idx = eidx;
+ if (spec->capsrc_nids)
+ spec->capsrc_nids += i;
+ spec->adc_nids += i;
+ spec->num_adc_nids = 1;
+ return;
+ }
+ snd_printd(KERN_INFO "hda_codec: %s: "
+ "No ADC/MUX containing both 0x%x and 0x%x pins\n",
+ codec->chip_name, spec->int_mic.pin, spec->ext_mic.pin);
+ spec->auto_mic = 0; /* disable auto-mic to be sure */
+}
+
+static void set_capture_mixer(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
static struct snd_kcontrol_new *caps[2][3] = {
{ alc_capture_mixer_nosrc1,
alc_capture_mixer_nosrc2,
@@ -4559,7 +4745,10 @@
};
if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
int mux;
- if (spec->input_mux && spec->input_mux->num_items > 1)
+ if (spec->auto_mic) {
+ mux = 0;
+ fixup_automic_adc(codec);
+ } else if (spec->input_mux && spec->input_mux->num_items > 1)
mux = 1;
else
mux = 0;
@@ -4590,8 +4779,8 @@
alc880_models,
alc880_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC880_AUTO;
}
@@ -4616,7 +4805,7 @@
}
if (board_config != ALC880_AUTO)
- setup_preset(spec, &alc880_presets[board_config]);
+ setup_preset(codec, &alc880_presets[board_config]);
spec->stream_analog_playback = &alc880_pcm_analog_playback;
spec->stream_analog_capture = &alc880_pcm_analog_capture;
@@ -4629,7 +4818,7 @@
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, alc880_adc_nids[0]);
/* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wcap = get_wcaps_type(wcap);
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc880_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
@@ -4638,7 +4827,7 @@
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
}
}
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x0c;
@@ -5830,7 +6019,14 @@
nid = cfg->line_out_pins[0];
if (nid) {
- err = alc260_add_playback_controls(spec, nid, "Front", &vols);
+ const char *pfx;
+ if (!cfg->speaker_pins[0] && !cfg->hp_pins[0])
+ pfx = "Master";
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = "Front";
+ err = alc260_add_playback_controls(spec, nid, pfx, &vols);
if (err < 0)
return err;
}
@@ -5853,39 +6049,10 @@
}
/* create playback/capture controls for input pins */
-static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec,
+static int alc260_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, err, idx;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- if (cfg->input_pins[i] >= 0x12) {
- idx = cfg->input_pins[i] - 0x12;
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx,
- 0x07);
- if (err < 0)
- return err;
- imux->items[imux->num_items].label =
- auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx;
- imux->num_items++;
- }
- if (cfg->input_pins[i] >= 0x0f && cfg->input_pins[i] <= 0x10){
- idx = cfg->input_pins[i] - 0x09;
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx,
- 0x07);
- if (err < 0)
- return err;
- imux->items[imux->num_items].label =
- auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx;
- imux->num_items++;
- }
- }
- return 0;
+ return alc_auto_create_input_ctls(codec, cfg, 0x07, 0x04, 0x05);
}
static void alc260_auto_set_output_and_unmute(struct hda_codec *codec,
@@ -5999,7 +6166,7 @@
return err;
if (!spec->kctls.list)
return 0; /* can't find valid BIOS pin config */
- err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc260_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -6234,8 +6401,7 @@
alc260_models,
alc260_cfg_tbl);
if (board_config < 0) {
- snd_printd(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n",
+ snd_printd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
codec->chip_name);
board_config = ALC260_AUTO;
}
@@ -6261,7 +6427,7 @@
}
if (board_config != ALC260_AUTO)
- setup_preset(spec, &alc260_presets[board_config]);
+ setup_preset(codec, &alc260_presets[board_config]);
spec->stream_analog_playback = &alc260_pcm_analog_playback;
spec->stream_analog_capture = &alc260_pcm_analog_capture;
@@ -6272,7 +6438,7 @@
if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x04 is valid */
unsigned int wcap = get_wcaps(codec, 0x04);
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wcap = get_wcaps_type(wcap);
/* get type */
if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
spec->adc_nids = alc260_adc_nids_alt;
@@ -6282,7 +6448,7 @@
spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
}
}
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x08;
@@ -6301,7 +6467,7 @@
/*
- * ALC882 support
+ * ALC882/883/885/888/889 support
*
* ALC882 is almost identical with ALC880 but has cleaner and more flexible
* configuration. Each pin widget can choose any input DACs and a mixer.
@@ -6313,22 +6479,35 @@
*/
#define ALC882_DIGOUT_NID 0x06
#define ALC882_DIGIN_NID 0x0a
+#define ALC883_DIGOUT_NID ALC882_DIGOUT_NID
+#define ALC883_DIGIN_NID ALC882_DIGIN_NID
+#define ALC1200_DIGOUT_NID 0x10
+
static struct hda_channel_mode alc882_ch_modes[1] = {
{ 8, NULL }
};
+/* DACs */
static hda_nid_t alc882_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
};
+#define alc883_dac_nids alc882_dac_nids
-/* identical with ALC880 */
+/* ADCs */
#define alc882_adc_nids alc880_adc_nids
#define alc882_adc_nids_alt alc880_adc_nids_alt
+#define alc883_adc_nids alc882_adc_nids_alt
+static hda_nid_t alc883_adc_nids_alt[1] = { 0x08 };
+static hda_nid_t alc883_adc_nids_rev[2] = { 0x09, 0x08 };
+#define alc889_adc_nids alc880_adc_nids
static hda_nid_t alc882_capsrc_nids[3] = { 0x24, 0x23, 0x22 };
static hda_nid_t alc882_capsrc_nids_alt[2] = { 0x23, 0x22 };
+#define alc883_capsrc_nids alc882_capsrc_nids_alt
+static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 };
+#define alc889_capsrc_nids alc882_capsrc_nids
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
@@ -6343,6 +6522,17 @@
},
};
+#define alc883_capture_source alc882_capture_source
+
+static struct hda_input_mux alc889_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Front Mic", 0x0 },
+ { "Mic", 0x3 },
+ { "Line", 0x2 },
+ },
+};
+
static struct hda_input_mux mb5_capture_source = {
.num_items = 3,
.items = {
@@ -6352,6 +6542,77 @@
},
};
+static struct hda_input_mux alc883_3stack_6ch_intel = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x1 },
+ { "Front Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc883_lenovo_101e_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x1 },
+ { "Line", 0x2 },
+ },
+};
+
+static struct hda_input_mux alc883_lenovo_nb0763_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "iMic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ { "Int Mic", 0x1 },
+ },
+};
+
+static struct hda_input_mux alc883_lenovo_sky_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc883_asus_eee1601_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ },
+};
+
+static struct hda_input_mux alc889A_mb31_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ /* Front Mic (0x01) unused */
+ { "Line", 0x2 },
+ /* Line 2 (0x03) unused */
+ /* CD (0x04) unsused? */
+ },
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_channel_mode alc883_3ST_2ch_modes[1] = {
+ { 2, NULL }
+};
+
/*
* 2ch mode
*/
@@ -6364,6 +6625,18 @@
};
/*
+ * 4ch mode
+ */
+static struct hda_verb alc882_3ST_ch4_init[] = {
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
* 6ch mode
*/
static struct hda_verb alc882_3ST_ch6_init[] = {
@@ -6376,11 +6649,60 @@
{ } /* end */
};
-static struct hda_channel_mode alc882_3ST_6ch_modes[2] = {
+static struct hda_channel_mode alc882_3ST_6ch_modes[3] = {
{ 2, alc882_3ST_ch2_init },
+ { 4, alc882_3ST_ch4_init },
{ 6, alc882_3ST_ch6_init },
};
+#define alc883_3ST_6ch_modes alc882_3ST_6ch_modes
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_3ST_ch2_clevo_init[] = {
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_3ST_ch4_clevo_init[] = {
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_3ST_ch6_clevo_init[] = {
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_3ST_6ch_clevo_modes[3] = {
+ { 2, alc883_3ST_ch2_clevo_init },
+ { 4, alc883_3ST_ch4_clevo_init },
+ { 6, alc883_3ST_ch6_clevo_init },
+};
+
+
/*
* 6ch mode
*/
@@ -6423,9 +6745,9 @@
};
/*
- * 6ch mode
+ * 4ch mode
*/
-static struct hda_verb alc885_mbp_ch6_init[] = {
+static struct hda_verb alc885_mbp_ch4_init[] = {
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
@@ -6434,9 +6756,9 @@
{ } /* end */
};
-static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
+static struct hda_channel_mode alc885_mbp_4ch_modes[2] = {
{ 2, alc885_mbp_ch2_init },
- { 6, alc885_mbp_ch6_init },
+ { 4, alc885_mbp_ch4_init },
};
/*
@@ -6468,6 +6790,189 @@
{ 6, alc885_mb5_ch6_init },
};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_4ST_ch2_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_4ST_ch4_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_4ST_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_4ST_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
+ { 2, alc883_4ST_ch2_init },
+ { 4, alc883_4ST_ch4_init },
+ { 6, alc883_4ST_ch6_init },
+ { 8, alc883_4ST_ch8_init },
+};
+
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc883_3ST_ch2_intel_init[] = {
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc883_3ST_ch4_intel_init[] = {
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_3ST_ch6_intel_init[] = {
+ { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_3ST_6ch_intel_modes[3] = {
+ { 2, alc883_3ST_ch2_intel_init },
+ { 4, alc883_3ST_ch4_intel_init },
+ { 6, alc883_3ST_ch6_intel_init },
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc889_ch2_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc889_ch6_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc889_ch8_intel_init[] = {
+ { 0x14, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x19, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { 0x16, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x03 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc889_8ch_intel_modes[3] = {
+ { 2, alc889_ch2_intel_init },
+ { 6, alc889_ch6_intel_init },
+ { 8, alc889_ch8_intel_init },
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc883_sixstack_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc883_sixstack_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc883_sixstack_modes[2] = {
+ { 6, alc883_sixstack_ch6_init },
+ { 8, alc883_sixstack_ch8_init },
+};
+
+
/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
* Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
*/
@@ -6497,10 +7002,11 @@
};
static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0e, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
@@ -6603,7 +7109,7 @@
{ } /* end */
};
-static struct hda_verb alc882_init_verbs[] = {
+static struct hda_verb alc882_base_init_verbs[] = {
/* Front mixer: unmute input/output amp left and right (volume = 0) */
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
@@ -6621,6 +7127,13 @@
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* mute analog input loopbacks */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -6655,11 +7168,6 @@
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
@@ -6670,9 +7178,6 @@
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* ADC1: mute amp left and right */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
/* ADC2: mute amp left and right */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -6683,6 +7188,18 @@
{ }
};
+static struct hda_verb alc882_adc1_init_verbs[] = {
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* ADC1: mute amp left and right */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ { }
+};
+
static struct hda_verb alc882_eapd_verbs[] = {
/* change to EAPD mode */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
@@ -6690,6 +7207,110 @@
{ }
};
+static struct hda_verb alc889_eapd_verbs[] = {
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
+};
+
+static struct hda_verb alc_hp15_unsol_verbs[] = {
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
+};
+
+static struct hda_verb alc885_init_verbs[] = {
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Rear mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* CLFE mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Side mixer */
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ /* mute analog input loopbacks */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+
+ /* Front HP Pin: output 0 (0x0c) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Rear Pin: output 1 (0x0d) */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x19, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* Side Pin: output 3 (0x0f) */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ /* Mic (rear) pin: input vref at 80% */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ /* Mixer elements: 0x18, , 0x1a, 0x1b */
+ /* Input mixer1 */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ /* ADC2: mute amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ /* ADC3: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+
+ { }
+};
+
+static struct hda_verb alc885_init_input_verbs[] = {
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ { }
+};
+
+
+/* Unmute Selector 24h and set the default input to front mic */
+static struct hda_verb alc889_init_input_verbs[] = {
+ {0x24, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ { }
+};
+
+
+#define alc883_init_verbs alc882_base_init_verbs
+
/* Mac Pro test */
static struct snd_kcontrol_new alc882_macpro_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -6814,14 +7435,18 @@
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* HP mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* HP Pin: output 0 (0x0d) */
+ /* HP Pin: output 0 (0x0e) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Mic (rear) pin: input vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
@@ -6893,23 +7518,21 @@
};
/* Toggle speaker-output according to the hp-jack state */
-static void alc885_imac24_automute_init_hook(struct hda_codec *codec)
+static void alc885_imac24_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x18;
spec->autocfg.speaker_pins[1] = 0x1a;
- alc_automute_amp(codec);
}
-static void alc885_mbp3_init_hook(struct hda_codec *codec)
+static void alc885_mbp3_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
@@ -6937,13 +7560,12 @@
spec->jack_present ? 1 : 3);
}
-static void alc882_targa_init_hook(struct hda_codec *codec)
+static void alc882_targa_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- alc882_targa_automute(codec);
}
static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res)
@@ -7031,18 +7653,16 @@
static void alc885_imac24_init_hook(struct hda_codec *codec)
{
alc885_macpro_init_hook(codec);
- alc885_imac24_automute_init_hook(codec);
+ alc_automute_amp(codec);
}
/*
* generic initialization of ADC, input mixers and output mixers
*/
-static struct hda_verb alc882_auto_init_verbs[] = {
+static struct hda_verb alc883_auto_init_verbs[] = {
/*
* Unmute ADC0-2 and set the default input to mic-in
*/
- {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -7083,11 +7703,6 @@
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
@@ -7102,820 +7717,6 @@
{ }
};
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-#define alc882_loopbacks alc880_loopbacks
-#endif
-
-/* pcm configuration: identical with ALC880 */
-#define alc882_pcm_analog_playback alc880_pcm_analog_playback
-#define alc882_pcm_analog_capture alc880_pcm_analog_capture
-#define alc882_pcm_digital_playback alc880_pcm_digital_playback
-#define alc882_pcm_digital_capture alc880_pcm_digital_capture
-
-/*
- * configuration and preset
- */
-static const char *alc882_models[ALC882_MODEL_LAST] = {
- [ALC882_3ST_DIG] = "3stack-dig",
- [ALC882_6ST_DIG] = "6stack-dig",
- [ALC882_ARIMA] = "arima",
- [ALC882_W2JC] = "w2jc",
- [ALC882_TARGA] = "targa",
- [ALC882_ASUS_A7J] = "asus-a7j",
- [ALC882_ASUS_A7M] = "asus-a7m",
- [ALC885_MACPRO] = "macpro",
- [ALC885_MB5] = "mb5",
- [ALC885_MBP3] = "mbp3",
- [ALC885_IMAC24] = "imac24",
- [ALC882_AUTO] = "auto",
-};
-
-static struct snd_pci_quirk alc882_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J),
- SND_PCI_QUIRK(0x1043, 0x1243, "Asus A7J", ALC882_ASUS_A7J),
- SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_ASUS_A7M),
- SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC),
- SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */
- SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA),
- {}
-};
-
-static struct alc_config_preset alc882_presets[] = {
- [ALC882_3ST_DIG] = {
- .mixers = { alc882_base_mixer },
- .init_verbs = { alc882_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
- .channel_mode = alc882_ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_6ST_DIG] = {
- .mixers = { alc882_base_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
- .channel_mode = alc882_sixstack_modes,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_ARIMA] = {
- .mixers = { alc882_base_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_eapd_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
- .channel_mode = alc882_sixstack_modes,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_W2JC] = {
- .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_eapd_verbs,
- alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- .dig_out_nid = ALC882_DIGOUT_NID,
- },
- [ALC885_MBP3] = {
- .mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
- .init_verbs = { alc885_mbp3_init_verbs,
- alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mbp_6ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes),
- .input_mux = &alc882_capture_source,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc885_mbp3_init_hook,
- },
- [ALC885_MB5] = {
- .mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
- .init_verbs = { alc885_mb5_init_verbs,
- alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mb5_6ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
- .input_mux = &mb5_capture_source,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- },
- [ALC885_MACPRO] = {
- .mixers = { alc882_macpro_mixer },
- .init_verbs = { alc882_macpro_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
- .channel_mode = alc882_ch_modes,
- .input_mux = &alc882_capture_source,
- .init_hook = alc885_macpro_init_hook,
- },
- [ALC885_IMAC24] = {
- .mixers = { alc885_imac24_mixer },
- .init_verbs = { alc885_imac24_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .dig_in_nid = ALC882_DIGIN_NID,
- .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
- .channel_mode = alc882_ch_modes,
- .input_mux = &alc882_capture_source,
- .unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc885_imac24_init_hook,
- },
- [ALC882_TARGA] = {
- .mixers = { alc882_targa_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc880_gpio3_init_verbs,
- alc882_targa_verbs},
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
- .adc_nids = alc882_adc_nids,
- .capsrc_nids = alc882_capsrc_nids,
- .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
- .channel_mode = alc882_3ST_6ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- .unsol_event = alc882_targa_unsol_event,
- .init_hook = alc882_targa_init_hook,
- },
- [ALC882_ASUS_A7J] = {
- .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_asus_a7j_verbs},
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
- .adc_nids = alc882_adc_nids,
- .capsrc_nids = alc882_capsrc_nids,
- .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
- .channel_mode = alc882_3ST_6ch_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- },
- [ALC882_ASUS_A7M] = {
- .mixers = { alc882_asus_a7m_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_eapd_verbs,
- alc880_gpio1_init_verbs,
- alc882_asus_a7m_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
- .dac_nids = alc882_dac_nids,
- .dig_out_nid = ALC882_DIGOUT_NID,
- .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
- .channel_mode = alc880_threestack_modes,
- .need_dac_fix = 1,
- .input_mux = &alc882_capture_source,
- },
-};
-
-
-/*
- * Pin config fixes
- */
-enum {
- PINFIX_ABIT_AW9D_MAX
-};
-
-static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
- { 0x15, 0x01080104 }, /* side */
- { 0x16, 0x01011012 }, /* rear */
- { 0x17, 0x01016011 }, /* clfe */
- { }
-};
-
-static const struct alc_pincfg *alc882_pin_fixes[] = {
- [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix,
-};
-
-static struct snd_pci_quirk alc882_pinfix_tbl[] = {
- SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
- {}
-};
-
-/*
- * BIOS auto configuration
- */
-static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
- hda_nid_t nid, int pin_type,
- int dac_idx)
-{
- /* set as output */
- struct alc_spec *spec = codec->spec;
- int idx;
-
- alc_set_pin_output(codec, nid, pin_type);
- if (spec->multiout.dac_nids[dac_idx] == 0x25)
- idx = 4;
- else
- idx = spec->multiout.dac_nids[dac_idx] - 2;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
-
-}
-
-static void alc882_auto_init_multi_out(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int i;
-
- for (i = 0; i <= HDA_SIDE; i++) {
- hda_nid_t nid = spec->autocfg.line_out_pins[i];
- int pin_type = get_pin_type(spec->autocfg.line_out_type);
- if (nid)
- alc882_auto_set_output_and_unmute(codec, nid, pin_type,
- i);
- }
-}
-
-static void alc882_auto_init_hp_out(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- hda_nid_t pin;
-
- pin = spec->autocfg.hp_pins[0];
- if (pin) /* connect to front */
- /* use dac 0 */
- alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
- pin = spec->autocfg.speaker_pins[0];
- if (pin)
- alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
-}
-
-#define alc882_is_input_pin(nid) alc880_is_input_pin(nid)
-#define ALC882_PIN_CD_NID ALC880_PIN_CD_NID
-
-static void alc882_auto_init_analog_input(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int i;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- hda_nid_t nid = spec->autocfg.input_pins[i];
- if (!nid)
- continue;
- alc_set_input_pin(codec, nid, AUTO_PIN_FRONT_MIC /*i*/);
- if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP)
- snd_hda_codec_write(codec, nid, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_OUT_MUTE);
- }
-}
-
-static void alc882_auto_init_input_src(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int c;
-
- for (c = 0; c < spec->num_adc_nids; c++) {
- hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
- hda_nid_t nid = spec->capsrc_nids[c];
- unsigned int mux_idx;
- const struct hda_input_mux *imux;
- int conns, mute, idx, item;
-
- conns = snd_hda_get_connections(codec, nid, conn_list,
- ARRAY_SIZE(conn_list));
- if (conns < 0)
- continue;
- mux_idx = c >= spec->num_mux_defs ? 0 : c;
- imux = &spec->input_mux[mux_idx];
- for (idx = 0; idx < conns; idx++) {
- /* if the current connection is the selected one,
- * unmute it as default - otherwise mute it
- */
- mute = AMP_IN_MUTE(idx);
- for (item = 0; item < imux->num_items; item++) {
- if (imux->items[item].index == idx) {
- if (spec->cur_mux[c] == item)
- mute = AMP_IN_UNMUTE(idx);
- break;
- }
- }
- /* check if we have a selector or mixer
- * we could check for the widget type instead, but
- * just check for Amp-In presence (in case of mixer
- * without amp-in there is something wrong, this
- * function shouldn't be used or capsrc nid is wrong)
- */
- if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)
- snd_hda_codec_write(codec, nid, 0,
- AC_VERB_SET_AMP_GAIN_MUTE,
- mute);
- else if (mute != AMP_IN_MUTE(idx))
- snd_hda_codec_write(codec, nid, 0,
- AC_VERB_SET_CONNECT_SEL,
- idx);
- }
- }
-}
-
-/* add mic boosts if needed */
-static int alc_auto_add_mic_boost(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int err;
- hda_nid_t nid;
-
- nid = spec->autocfg.input_pins[AUTO_PIN_MIC];
- if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Mic Boost",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
- if (err < 0)
- return err;
- }
- nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC];
- if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Front Mic Boost",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
-/* almost identical with ALC880 parser... */
-static int alc882_parse_auto_config(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- int err = alc880_parse_auto_config(codec);
-
- if (err < 0)
- return err;
- else if (!err)
- return 0; /* no config found */
-
- err = alc_auto_add_mic_boost(codec);
- if (err < 0)
- return err;
-
- /* hack - override the init verbs */
- spec->init_verbs[0] = alc882_auto_init_verbs;
-
- return 1; /* config found */
-}
-
-/* additional initialization for auto-configuration model */
-static void alc882_auto_init(struct hda_codec *codec)
-{
- struct alc_spec *spec = codec->spec;
- alc882_auto_init_multi_out(codec);
- alc882_auto_init_hp_out(codec);
- alc882_auto_init_analog_input(codec);
- alc882_auto_init_input_src(codec);
- if (spec->unsol_event)
- alc_inithook(codec);
-}
-
-static int patch_alc883(struct hda_codec *codec); /* called in patch_alc882() */
-
-static int patch_alc882(struct hda_codec *codec)
-{
- struct alc_spec *spec;
- int err, board_config;
-
- spec = kzalloc(sizeof(*spec), GFP_KERNEL);
- if (spec == NULL)
- return -ENOMEM;
-
- codec->spec = spec;
-
- board_config = snd_hda_check_board_config(codec, ALC882_MODEL_LAST,
- alc882_models,
- alc882_cfg_tbl);
-
- if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
- /* Pick up systems that don't supply PCI SSID */
- switch (codec->subsystem_id) {
- case 0x106b0c00: /* Mac Pro */
- board_config = ALC885_MACPRO;
- break;
- case 0x106b1000: /* iMac 24 */
- case 0x106b2800: /* AppleTV */
- case 0x106b3e00: /* iMac 24 Aluminium */
- board_config = ALC885_IMAC24;
- break;
- case 0x106b00a0: /* MacBookPro3,1 - Another revision */
- case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
- case 0x106b00a4: /* MacbookPro4,1 */
- case 0x106b2c00: /* Macbook Pro rev3 */
- /* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
- case 0x106b3800: /* MacbookPro4,1 - latter revision */
- board_config = ALC885_MBP3;
- break;
- case 0x106b3f00: /* Macbook 5,1 */
- case 0x106b4000: /* Macbook Pro 5,1 - FIXME: HP jack sense
- * seems not working, so apparently
- * no perfect solution yet
- */
- board_config = ALC885_MB5;
- break;
- default:
- /* ALC889A is handled better as ALC888-compatible */
- if (codec->revision_id == 0x100101 ||
- codec->revision_id == 0x100103) {
- alc_free(codec);
- return patch_alc883(codec);
- }
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n",
- codec->chip_name);
- board_config = ALC882_AUTO;
- }
- }
-
- alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes);
-
- if (board_config == ALC882_AUTO) {
- /* automatic parse from the BIOS config */
- err = alc882_parse_auto_config(codec);
- if (err < 0) {
- alc_free(codec);
- return err;
- } else if (!err) {
- printk(KERN_INFO
- "hda_codec: Cannot set up configuration "
- "from BIOS. Using base mode...\n");
- board_config = ALC882_3ST_DIG;
- }
- }
-
- err = snd_hda_attach_beep_device(codec, 0x1);
- if (err < 0) {
- alc_free(codec);
- return err;
- }
-
- if (board_config != ALC882_AUTO)
- setup_preset(spec, &alc882_presets[board_config]);
-
- spec->stream_analog_playback = &alc882_pcm_analog_playback;
- spec->stream_analog_capture = &alc882_pcm_analog_capture;
- /* FIXME: setup DAC5 */
- /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/
- spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
-
- spec->stream_digital_playback = &alc882_pcm_digital_playback;
- spec->stream_digital_capture = &alc882_pcm_digital_capture;
-
- if (!spec->adc_nids && spec->input_mux) {
- /* check whether NID 0x07 is valid */
- unsigned int wcap = get_wcaps(codec, 0x07);
- /* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wcap != AC_WID_AUD_IN) {
- spec->adc_nids = alc882_adc_nids_alt;
- spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
- spec->capsrc_nids = alc882_capsrc_nids_alt;
- } else {
- spec->adc_nids = alc882_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
- spec->capsrc_nids = alc882_capsrc_nids;
- }
- }
- set_capture_mixer(spec);
- set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
-
- spec->vmaster_nid = 0x0c;
-
- codec->patch_ops = alc_patch_ops;
- if (board_config == ALC882_AUTO)
- spec->init_hook = alc882_auto_init;
-#ifdef CONFIG_SND_HDA_POWER_SAVE
- if (!spec->loopback.amplist)
- spec->loopback.amplist = alc882_loopbacks;
-#endif
- codec->proc_widget_hook = print_realtek_coef;
-
- return 0;
-}
-
-/*
- * ALC883 support
- *
- * ALC883 is almost identical with ALC880 but has cleaner and more flexible
- * configuration. Each pin widget can choose any input DACs and a mixer.
- * Each ADC is connected from a mixer of all inputs. This makes possible
- * 6-channel independent captures.
- *
- * In addition, an independent DAC for the multi-playback (not used in this
- * driver yet).
- */
-#define ALC883_DIGOUT_NID 0x06
-#define ALC883_DIGIN_NID 0x0a
-
-#define ALC1200_DIGOUT_NID 0x10
-
-static hda_nid_t alc883_dac_nids[4] = {
- /* front, rear, clfe, rear_surr */
- 0x02, 0x03, 0x04, 0x05
-};
-
-static hda_nid_t alc883_adc_nids[2] = {
- /* ADC1-2 */
- 0x08, 0x09,
-};
-
-static hda_nid_t alc883_adc_nids_alt[1] = {
- /* ADC1 */
- 0x08,
-};
-
-static hda_nid_t alc883_adc_nids_rev[2] = {
- /* ADC2-1 */
- 0x09, 0x08
-};
-
-#define alc889_adc_nids alc880_adc_nids
-
-static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 };
-
-static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 };
-
-#define alc889_capsrc_nids alc882_capsrc_nids
-
-/* input MUX */
-/* FIXME: should be a matrix-type input source selection */
-
-static struct hda_input_mux alc883_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_3stack_6ch_intel = {
- .num_items = 4,
- .items = {
- { "Mic", 0x1 },
- { "Front Mic", 0x0 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_lenovo_101e_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 },
- { "Line", 0x2 },
- },
-};
-
-static struct hda_input_mux alc883_lenovo_nb0763_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "iMic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- { "Int Mic", 0x1 },
- },
-};
-
-static struct hda_input_mux alc883_lenovo_sky_capture_source = {
- .num_items = 3,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x4 },
- },
-};
-
-static struct hda_input_mux alc883_asus_eee1601_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- { "Line", 0x2 },
- },
-};
-
-static struct hda_input_mux alc889A_mb31_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x0 },
- /* Front Mic (0x01) unused */
- { "Line", 0x2 },
- /* Line 2 (0x03) unused */
- /* CD (0x04) unsused? */
- },
-};
-
-/*
- * 2ch mode
- */
-static struct hda_channel_mode alc883_3ST_2ch_modes[1] = {
- { 2, NULL }
-};
-
-/*
- * 2ch mode
- */
-static struct hda_verb alc883_3ST_ch2_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
-
-/*
- * 4ch mode
- */
-static struct hda_verb alc883_3ST_ch4_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_3ST_ch6_init[] = {
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-static struct hda_channel_mode alc883_3ST_6ch_modes[3] = {
- { 2, alc883_3ST_ch2_init },
- { 4, alc883_3ST_ch4_init },
- { 6, alc883_3ST_ch6_init },
-};
-
-
-/*
- * 2ch mode
- */
-static struct hda_verb alc883_4ST_ch2_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
-
-/*
- * 4ch mode
- */
-static struct hda_verb alc883_4ST_ch4_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_4ST_ch6_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 8ch mode
- */
-static struct hda_verb alc883_4ST_ch8_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03 },
- { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-static struct hda_channel_mode alc883_4ST_8ch_modes[4] = {
- { 2, alc883_4ST_ch2_init },
- { 4, alc883_4ST_ch4_init },
- { 6, alc883_4ST_ch6_init },
- { 8, alc883_4ST_ch8_init },
-};
-
-
-/*
- * 2ch mode
- */
-static struct hda_verb alc883_3ST_ch2_intel_init[] = {
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { } /* end */
-};
-
-/*
- * 4ch mode
- */
-static struct hda_verb alc883_3ST_ch4_intel_init[] = {
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_3ST_ch6_intel_init[] = {
- { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x19, AC_VERB_SET_CONNECT_SEL, 0x02 },
- { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
- { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { } /* end */
-};
-
-static struct hda_channel_mode alc883_3ST_6ch_intel_modes[3] = {
- { 2, alc883_3ST_ch2_intel_init },
- { 4, alc883_3ST_ch4_intel_init },
- { 6, alc883_3ST_ch6_intel_init },
-};
-
-/*
- * 6ch mode
- */
-static struct hda_verb alc883_sixstack_ch6_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
-
-/*
- * 8ch mode
- */
-static struct hda_verb alc883_sixstack_ch8_init[] = {
- { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- { } /* end */
-};
-
-static struct hda_channel_mode alc883_sixstack_modes[2] = {
- { 6, alc883_sixstack_ch6_init },
- { 8, alc883_sixstack_ch8_init },
-};
-
/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
static struct hda_verb alc889A_mb31_ch2_init[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP as front */
@@ -7966,34 +7767,7 @@
{ }
};
-/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
- * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
- */
-
-static struct snd_kcontrol_new alc883_base_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
- HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
- HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
- HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- { } /* end */
-};
+#define alc883_base_mixer alc882_base_mixer
static struct snd_kcontrol_new alc883_mitac_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -8104,6 +7878,30 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc885_8ch_intel_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0,
+ HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x1b, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc883_fivestack_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -8344,93 +8142,14 @@
{ } /* end */
};
-static struct hda_verb alc883_init_verbs[] = {
- /* ADC1: mute amp left and right */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC2: mute amp left and right */
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Front mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Rear mixer */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* CLFE mixer */
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Side mixer */
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
- /* mute analog input loopbacks */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /* Front Pin: output 0 (0x0c) */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Rear Pin: output 1 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
- /* CLFE Pin: output 2 (0x0e) */
- {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* Side Pin: output 3 (0x0f) */
- {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Front Mic pin: input vref at 80% */
- {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: input */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line-2 In: Headphone output (output 0 - 0x0c) */
- {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* CD pin widget for input */
- {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer2 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer3 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- { }
-};
-
/* toggle speaker-output according to the hp-jack state */
-static void alc883_mitac_init_hook(struct hda_codec *codec)
+static void alc883_mitac_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x17;
- alc_automute_amp(codec);
}
/* auto-toggle front mic */
@@ -8462,6 +8181,22 @@
{ } /* end */
};
+static struct hda_verb alc883_clevo_m540r_verbs[] = {
+ /* HP */
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Int speaker */
+ /*{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},*/
+
+ /* enable unsolicited event */
+ /*
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN},
+ */
+
+ { } /* end */
+};
+
static struct hda_verb alc883_clevo_m720_verbs[] = {
/* HP */
{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -8585,7 +8320,7 @@
{ } /* end */
};
-static void alc888_3st_hp_init_hook(struct hda_codec *codec)
+static void alc888_3st_hp_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -8593,7 +8328,6 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x16;
spec->autocfg.speaker_pins[2] = 0x18;
- alc_automute_amp(codec);
}
static struct hda_verb alc888_3st_hp_verbs[] = {
@@ -8690,13 +8424,12 @@
};
/* toggle speaker-output according to the hp-jack state */
-static void alc883_medion_md2_init_hook(struct hda_codec *codec)
+static void alc883_medion_md2_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
/* toggle speaker-output according to the hp-jack state */
@@ -8713,12 +8446,16 @@
HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
}
-static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
+static void alc883_clevo_m720_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
+}
+
+static void alc883_clevo_m720_init_hook(struct hda_codec *codec)
+{
alc_automute_amp(codec);
alc883_clevo_m720_mic_automute(codec);
}
@@ -8737,22 +8474,20 @@
}
/* toggle speaker-output according to the hp-jack state */
-static void alc883_2ch_fujitsu_pi2515_init_hook(struct hda_codec *codec)
+static void alc883_2ch_fujitsu_pi2515_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
-static void alc883_haier_w66_init_hook(struct hda_codec *codec)
+static void alc883_haier_w66_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
@@ -8791,14 +8526,13 @@
}
/* toggle speaker-output according to the hp-jack state */
-static void alc883_acer_aspire_init_hook(struct hda_codec *codec)
+static void alc883_acer_aspire_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x15;
spec->autocfg.speaker_pins[1] = 0x16;
- alc_automute_amp(codec);
}
static struct hda_verb alc883_acer_eapd_verbs[] = {
@@ -8819,7 +8553,14 @@
{ }
};
-static void alc888_6st_dell_init_hook(struct hda_codec *codec)
+static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ { } /* end */
+};
+
+static void alc888_6st_dell_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -8828,10 +8569,9 @@
spec->autocfg.speaker_pins[1] = 0x15;
spec->autocfg.speaker_pins[2] = 0x16;
spec->autocfg.speaker_pins[3] = 0x17;
- alc_automute_amp(codec);
}
-static void alc888_lenovo_sky_init_hook(struct hda_codec *codec)
+static void alc888_lenovo_sky_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -8841,82 +8581,17 @@
spec->autocfg.speaker_pins[2] = 0x16;
spec->autocfg.speaker_pins[3] = 0x17;
spec->autocfg.speaker_pins[4] = 0x1a;
- alc_automute_amp(codec);
}
-static void alc883_vaiott_init_hook(struct hda_codec *codec)
+static void alc883_vaiott_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x17;
- alc_automute_amp(codec);
}
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static struct hda_verb alc883_auto_init_verbs[] = {
- /*
- * Unmute ADC0-2 and set the default input to mic-in
- */
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
- * mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for
- * front panel mic (mic 2)
- */
- /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
- {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-
- /*
- * Set up output mixers (0x0c - 0x0f)
- */
- /* set vol=0 to output mixers */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* set up input amps for analog loopback */
- /* Amp Indices: DAC = 0, mixer = 1 */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1 */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- /* Input mixer2 */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- /* {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
- { }
-};
-
static struct hda_verb alc888_asus_m90v_verbs[] = {
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
@@ -8927,19 +8602,7 @@
{ } /* end */
};
-static void alc883_nb_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
-}
-
-static void alc883_M90V_init_hook(struct hda_codec *codec)
+static void alc883_mode2_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -8947,26 +8610,11 @@
spec->autocfg.speaker_pins[0] = 0x14;
spec->autocfg.speaker_pins[1] = 0x15;
spec->autocfg.speaker_pins[2] = 0x16;
- alc_automute_pin(codec);
-}
-
-static void alc883_mode2_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC880_MIC_EVENT:
- alc883_nb_mic_automute(codec);
- break;
- default:
- alc_sku_unsol_event(codec, res);
- break;
- }
-}
-
-static void alc883_mode2_inithook(struct hda_codec *codec)
-{
- alc883_M90V_init_hook(codec);
- alc883_nb_mic_automute(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->int_mic.pin = 0x19;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
static struct hda_verb alc888_asus_eee1601_verbs[] = {
@@ -9027,25 +8675,44 @@
alc889A_mb31_automute(codec);
}
+
#ifdef CONFIG_SND_HDA_POWER_SAVE
-#define alc883_loopbacks alc880_loopbacks
+#define alc882_loopbacks alc880_loopbacks
#endif
/* pcm configuration: identical with ALC880 */
-#define alc883_pcm_analog_playback alc880_pcm_analog_playback
-#define alc883_pcm_analog_capture alc880_pcm_analog_capture
-#define alc883_pcm_analog_alt_capture alc880_pcm_analog_alt_capture
-#define alc883_pcm_digital_playback alc880_pcm_digital_playback
-#define alc883_pcm_digital_capture alc880_pcm_digital_capture
+#define alc882_pcm_analog_playback alc880_pcm_analog_playback
+#define alc882_pcm_analog_capture alc880_pcm_analog_capture
+#define alc882_pcm_digital_playback alc880_pcm_digital_playback
+#define alc882_pcm_digital_capture alc880_pcm_digital_capture
+
+static hda_nid_t alc883_slave_dig_outs[] = {
+ ALC1200_DIGOUT_NID, 0,
+};
+
+static hda_nid_t alc1200_slave_dig_outs[] = {
+ ALC883_DIGOUT_NID, 0,
+};
/*
* configuration and preset
*/
-static const char *alc883_models[ALC883_MODEL_LAST] = {
- [ALC883_3ST_2ch_DIG] = "3stack-dig",
+static const char *alc882_models[ALC882_MODEL_LAST] = {
+ [ALC882_3ST_DIG] = "3stack-dig",
+ [ALC882_6ST_DIG] = "6stack-dig",
+ [ALC882_ARIMA] = "arima",
+ [ALC882_W2JC] = "w2jc",
+ [ALC882_TARGA] = "targa",
+ [ALC882_ASUS_A7J] = "asus-a7j",
+ [ALC882_ASUS_A7M] = "asus-a7m",
+ [ALC885_MACPRO] = "macpro",
+ [ALC885_MB5] = "mb5",
+ [ALC885_MBP3] = "mbp3",
+ [ALC885_IMAC24] = "imac24",
+ [ALC883_3ST_2ch_DIG] = "3stack-2ch-dig",
[ALC883_3ST_6ch_DIG] = "3stack-6ch-dig",
[ALC883_3ST_6ch] = "3stack-6ch",
- [ALC883_6ST_DIG] = "6stack-dig",
+ [ALC883_6ST_DIG] = "alc883-6stack-dig",
[ALC883_TARGA_DIG] = "targa-dig",
[ALC883_TARGA_2ch_DIG] = "targa-2ch-dig",
[ALC883_TARGA_8ch_DIG] = "targa-8ch-dig",
@@ -9054,6 +8721,7 @@
[ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g",
[ALC888_ACER_ASPIRE_6530G] = "acer-aspire-6530g",
[ALC888_ACER_ASPIRE_8930G] = "acer-aspire-8930g",
+ [ALC888_ACER_ASPIRE_7730G] = "acer-aspire-7730g",
[ALC883_MEDION] = "medion",
[ALC883_MEDION_MD2] = "medion-md2",
[ALC883_LAPTOP_EAPD] = "laptop-eapd",
@@ -9065,18 +8733,22 @@
[ALC888_3ST_HP] = "3stack-hp",
[ALC888_6ST_DELL] = "6stack-dell",
[ALC883_MITAC] = "mitac",
+ [ALC883_CLEVO_M540R] = "clevo-m540r",
[ALC883_CLEVO_M720] = "clevo-m720",
[ALC883_FUJITSU_PI2515] = "fujitsu-pi2515",
[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
[ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel",
+ [ALC889A_INTEL] = "intel-alc889a",
+ [ALC889_INTEL] = "intel-x58",
[ALC1200_ASUS_P5Q] = "asus-p5q",
[ALC889A_MB31] = "mb31",
[ALC883_SONY_VAIO_TT] = "sony-vaio-tt",
- [ALC883_AUTO] = "auto",
+ [ALC882_AUTO] = "auto",
};
-static struct snd_pci_quirk alc883_cfg_tbl[] = {
- SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC883_3ST_6ch_DIG),
+static struct snd_pci_quirk alc882_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG),
+
SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x010a, "Acer Ferrari 5000", ALC883_ACER_ASPIRE),
@@ -9091,40 +8763,56 @@
ALC888_ACER_ASPIRE_8930G),
SND_PCI_QUIRK(0x1025, 0x0146, "Acer Aspire 6935G",
ALC888_ACER_ASPIRE_8930G),
- SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
- SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
+ SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC882_AUTO),
+ SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC882_AUTO),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC888_ACER_ASPIRE_6530G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC888_ACER_ASPIRE_6530G),
+ SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
+ ALC888_ACER_ASPIRE_7730G),
/* default Acer -- disabled as it causes more problems.
* model=auto should work fine now
*/
/* SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), */
+
SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
+
SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x2a66, "HP Acacia", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a72, "HP Educ.ar", ALC888_3ST_HP),
+
+ SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J),
+ SND_PCI_QUIRK(0x1043, 0x1243, "Asus A7J", ALC882_ASUS_A7J),
+ SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_ASUS_A7M),
SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V),
+ SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC),
+ SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
+ SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1043, 0x8284, "Asus Z37E", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q-EM HDMI", ALC1200_ASUS_P5Q),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
+
+ SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
- SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch),
- SND_PCI_QUIRK(0x1458, 0xa002, "MSI", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
+
SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG),
SND_PCI_QUIRK(0x1462, 0x0579, "MSI", ALC883_TARGA_2ch_DIG),
+ SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */
SND_PCI_QUIRK(0x1462, 0x2fb3, "MSI", ALC883_TARGA_2ch_DIG),
+ SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x3729, "MSI S420", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3783, "NEC S970", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3b7f, "MSI", ALC883_TARGA_2ch_DIG),
@@ -9133,6 +8821,7 @@
SND_PCI_QUIRK(0x1462, 0x3fc3, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3fcc, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x3fdf, "MSI", ALC883_TARGA_DIG),
+ SND_PCI_QUIRK(0x1462, 0x42cd, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4314, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4319, "MSI", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x4324, "MSI", ALC883_TARGA_DIG),
@@ -9146,11 +8835,15 @@
SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7350, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0xa422, "MSI", ALC883_TARGA_2ch_DIG),
+ SND_PCI_QUIRK(0x1462, 0xaa08, "MSI", ALC883_TARGA_2ch_DIG),
+
SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720),
SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720),
+ SND_PCI_QUIRK(0x1558, 0x5409, "Clevo laptop M540R", ALC883_CLEVO_M540R),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
+ /* SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA), */
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
ALC883_FUJITSU_PI2515),
@@ -9165,24 +8858,186 @@
SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
+
SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL),
SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL),
SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
- SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC889_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x0021, "Intel IbexPeak", ALC889A_INTEL),
+ SND_PCI_QUIRK(0x8086, 0x3b56, "Intel IbexPeak", ALC889A_INTEL),
SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
- SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC883_SONY_VAIO_TT),
+
{}
};
-static hda_nid_t alc883_slave_dig_outs[] = {
- ALC1200_DIGOUT_NID, 0,
+/* codec SSID table for Intel Mac */
+static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC885_MACPRO),
+ SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
+ SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
+ /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently
+ * no perfect solution yet
+ */
+ SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
+ {} /* terminator */
};
-static hda_nid_t alc1200_slave_dig_outs[] = {
- ALC883_DIGOUT_NID, 0,
-};
-
-static struct alc_config_preset alc883_presets[] = {
+static struct alc_config_preset alc882_presets[] = {
+ [ALC882_3ST_DIG] = {
+ .mixers = { alc882_base_mixer },
+ .init_verbs = { alc882_base_init_verbs,
+ alc882_adc1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_6ST_DIG] = {
+ .mixers = { alc882_base_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs,
+ alc882_adc1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
+ .channel_mode = alc882_sixstack_modes,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_ARIMA] = {
+ .mixers = { alc882_base_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_eapd_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
+ .channel_mode = alc882_sixstack_modes,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_W2JC] = {
+ .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_eapd_verbs, alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
+ .channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ },
+ [ALC885_MBP3] = {
+ .mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc885_mbp3_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = 2,
+ .dac_nids = alc882_dac_nids,
+ .hp_nid = 0x04,
+ .channel_mode = alc885_mbp_4ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
+ .input_mux = &alc882_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_mbp3_setup,
+ .init_hook = alc_automute_amp,
+ },
+ [ALC885_MB5] = {
+ .mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc885_mb5_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .channel_mode = alc885_mb5_6ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
+ .input_mux = &mb5_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ },
+ [ALC885_MACPRO] = {
+ .mixers = { alc882_macpro_mixer },
+ .init_verbs = { alc882_macpro_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .input_mux = &alc882_capture_source,
+ .init_hook = alc885_macpro_init_hook,
+ },
+ [ALC885_IMAC24] = {
+ .mixers = { alc885_imac24_mixer },
+ .init_verbs = { alc885_imac24_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
+ .channel_mode = alc882_ch_modes,
+ .input_mux = &alc882_capture_source,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc885_imac24_setup,
+ .init_hook = alc885_imac24_init_hook,
+ },
+ [ALC882_TARGA] = {
+ .mixers = { alc882_targa_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc880_gpio3_init_verbs, alc882_targa_verbs},
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
+ .adc_nids = alc882_adc_nids,
+ .capsrc_nids = alc882_capsrc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
+ .channel_mode = alc882_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ .unsol_event = alc882_targa_unsol_event,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
+ },
+ [ALC882_ASUS_A7J] = {
+ .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_asus_a7j_verbs},
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
+ .adc_nids = alc882_adc_nids,
+ .capsrc_nids = alc882_capsrc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes),
+ .channel_mode = alc882_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ },
+ [ALC882_ASUS_A7M] = {
+ .mixers = { alc882_asus_a7m_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
+ alc882_eapd_verbs, alc880_gpio1_init_verbs,
+ alc882_asus_a7m_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
+ .channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ },
[ALC883_3ST_2ch_DIG] = {
.mixers = { alc883_3ST_2ch_mixer },
.init_verbs = { alc883_init_verbs },
@@ -9229,6 +9084,46 @@
.need_dac_fix = 1,
.input_mux = &alc883_3stack_6ch_intel,
},
+ [ALC889A_INTEL] = {
+ .mixers = { alc885_8ch_intel_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc885_init_verbs, alc885_init_input_verbs,
+ alc_hp15_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+ .adc_nids = alc889_adc_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .slave_dig_outs = alc883_slave_dig_outs,
+ .num_channel_mode = ARRAY_SIZE(alc889_8ch_intel_modes),
+ .channel_mode = alc889_8ch_intel_modes,
+ .capsrc_nids = alc889_capsrc_nids,
+ .input_mux = &alc889_capture_source,
+ .setup = alc889_automute_setup,
+ .init_hook = alc_automute_amp,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .need_dac_fix = 1,
+ },
+ [ALC889_INTEL] = {
+ .mixers = { alc885_8ch_intel_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc885_init_verbs, alc889_init_input_verbs,
+ alc889_eapd_verbs, alc_hp15_unsol_verbs},
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc889_adc_nids),
+ .adc_nids = alc889_adc_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .slave_dig_outs = alc883_slave_dig_outs,
+ .num_channel_mode = ARRAY_SIZE(alc889_8ch_intel_modes),
+ .channel_mode = alc889_8ch_intel_modes,
+ .capsrc_nids = alc889_capsrc_nids,
+ .input_mux = &alc889_capture_source,
+ .setup = alc889_automute_setup,
+ .init_hook = alc889_intel_init_hook,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .need_dac_fix = 1,
+ },
[ALC883_6ST_DIG] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
.init_verbs = { alc883_init_verbs },
@@ -9252,7 +9147,8 @@
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_targa_unsol_event,
- .init_hook = alc883_targa_init_hook,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
},
[ALC883_TARGA_2ch_DIG] = {
.mixers = { alc883_targa_2ch_mixer},
@@ -9267,7 +9163,8 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_targa_unsol_event,
- .init_hook = alc883_targa_init_hook,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
},
[ALC883_TARGA_8ch_DIG] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
@@ -9285,7 +9182,8 @@
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_targa_unsol_event,
- .init_hook = alc883_targa_init_hook,
+ .setup = alc882_targa_setup,
+ .init_hook = alc882_targa_automute,
},
[ALC883_ACER] = {
.mixers = { alc883_base_mixer },
@@ -9311,7 +9209,8 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_acer_aspire_init_hook,
+ .setup = alc883_acer_aspire_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ACER_ASPIRE_4930G] = {
.mixers = { alc888_base_mixer,
@@ -9331,7 +9230,8 @@
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_2_capture_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_acer_aspire_4930g_init_hook,
+ .setup = alc888_acer_aspire_4930g_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ACER_ASPIRE_6530G] = {
.mixers = { alc888_acer_aspire_6530_mixer },
@@ -9349,7 +9249,8 @@
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_acer_aspire_6530_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_acer_aspire_6530g_init_hook,
+ .setup = alc888_acer_aspire_6530g_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ACER_ASPIRE_8930G] = {
.mixers = { alc888_base_mixer,
@@ -9370,7 +9271,28 @@
ARRAY_SIZE(alc889_capture_sources),
.input_mux = alc889_capture_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc889_acer_aspire_8930g_init_hook,
+ .setup = alc889_acer_aspire_8930g_setup,
+ .init_hook = alc_automute_amp,
+ },
+ [ALC888_ACER_ASPIRE_7730G] = {
+ .mixers = { alc883_3ST_6ch_mixer,
+ alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+ alc888_acer_aspire_7730G_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+ .adc_nids = alc883_adc_nids_rev,
+ .capsrc_nids = alc883_capsrc_nids_rev,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+ .channel_mode = alc883_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .const_channel_count = 6,
+ .input_mux = &alc883_capture_source,
+ .unsol_event = alc_automute_amp_unsol_event,
+ .setup = alc888_acer_aspire_6530g_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_MEDION] = {
.mixers = { alc883_fivestack_mixer,
@@ -9395,7 +9317,8 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_medion_md2_init_hook,
+ .setup = alc883_medion_md2_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_LAPTOP_EAPD] = {
.mixers = { alc883_base_mixer },
@@ -9406,6 +9329,21 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
},
+ [ALC883_CLEVO_M540R] = {
+ .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs, alc883_clevo_m540r_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_clevo_modes),
+ .channel_mode = alc883_3ST_6ch_clevo_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc883_capture_source,
+ /* This machine has the hardware HP auto-muting, thus
+ * we need no software mute via unsol event
+ */
+ },
[ALC883_CLEVO_M720] = {
.mixers = { alc883_clevo_m720_mixer },
.init_verbs = { alc883_init_verbs, alc883_clevo_m720_verbs },
@@ -9416,6 +9354,7 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc883_clevo_m720_unsol_event,
+ .setup = alc883_clevo_m720_setup,
.init_hook = alc883_clevo_m720_init_hook,
},
[ALC883_LENOVO_101E_2ch] = {
@@ -9441,7 +9380,8 @@
.need_dac_fix = 1,
.input_mux = &alc883_lenovo_nb0763_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_medion_md2_init_hook,
+ .setup = alc883_medion_md2_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_LENOVO_MS7195_DIG] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9466,7 +9406,8 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_haier_w66_init_hook,
+ .setup = alc883_haier_w66_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_3ST_HP] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9478,7 +9419,8 @@
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_3st_hp_init_hook,
+ .setup = alc888_3st_hp_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_6ST_DELL] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
@@ -9491,7 +9433,8 @@
.channel_mode = alc883_sixstack_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_6st_dell_init_hook,
+ .setup = alc888_6st_dell_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_MITAC] = {
.mixers = { alc883_mitac_mixer },
@@ -9502,7 +9445,8 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_mitac_init_hook,
+ .setup = alc883_mitac_setup,
+ .init_hook = alc_automute_amp,
},
[ALC883_FUJITSU_PI2515] = {
.mixers = { alc883_2ch_fujitsu_pi2515_mixer },
@@ -9515,7 +9459,8 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_fujitsu_pi2515_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_2ch_fujitsu_pi2515_init_hook,
+ .setup = alc883_2ch_fujitsu_pi2515_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_FUJITSU_XA3530] = {
.mixers = { alc888_base_mixer, alc883_chmode_mixer },
@@ -9533,7 +9478,8 @@
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_2_capture_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_fujitsu_xa3530_init_hook,
+ .setup = alc888_fujitsu_xa3530_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_LENOVO_SKY] = {
.mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer },
@@ -9546,7 +9492,8 @@
.need_dac_fix = 1,
.input_mux = &alc883_lenovo_sky_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_lenovo_sky_init_hook,
+ .setup = alc888_lenovo_sky_setup,
+ .init_hook = alc_automute_amp,
},
[ALC888_ASUS_M90V] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
@@ -9559,8 +9506,9 @@
.channel_mode = alc883_3ST_6ch_modes,
.need_dac_fix = 1,
.input_mux = &alc883_fujitsu_pi2515_capture_source,
- .unsol_event = alc883_mode2_unsol_event,
- .init_hook = alc883_mode2_inithook,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc883_mode2_setup,
+ .init_hook = alc_inithook,
},
[ALC888_ASUS_EEE1601] = {
.mixers = { alc883_asus_eee1601_mixer },
@@ -9613,15 +9561,45 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc883_vaiott_init_hook,
+ .setup = alc883_vaiott_setup,
+ .init_hook = alc_automute_amp,
},
};
/*
+ * Pin config fixes
+ */
+enum {
+ PINFIX_ABIT_AW9D_MAX
+};
+
+static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
+ { 0x15, 0x01080104 }, /* side */
+ { 0x16, 0x01011012 }, /* rear */
+ { 0x17, 0x01016011 }, /* clfe */
+ { }
+};
+
+static const struct alc_pincfg *alc882_pin_fixes[] = {
+ [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix,
+};
+
+static struct snd_pci_quirk alc882_pinfix_tbl[] = {
+ SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
+ {}
+};
+
+/*
* BIOS auto configuration
*/
-static void alc883_auto_set_output_and_unmute(struct hda_codec *codec,
+static int alc882_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x23, 0x22);
+}
+
+static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
int dac_idx)
{
@@ -9638,7 +9616,7 @@
}
-static void alc883_auto_init_multi_out(struct hda_codec *codec)
+static void alc882_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
@@ -9647,12 +9625,12 @@
hda_nid_t nid = spec->autocfg.line_out_pins[i];
int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
- alc883_auto_set_output_and_unmute(codec, nid, pin_type,
+ alc882_auto_set_output_and_unmute(codec, nid, pin_type,
i);
}
}
-static void alc883_auto_init_hp_out(struct hda_codec *codec)
+static void alc882_auto_init_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
@@ -9660,91 +9638,191 @@
pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
/* use dac 0 */
- alc883_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+ alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
pin = spec->autocfg.speaker_pins[0];
if (pin)
- alc883_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+ alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
}
-#define alc883_is_input_pin(nid) alc880_is_input_pin(nid)
-#define ALC883_PIN_CD_NID ALC880_PIN_CD_NID
-
-static void alc883_auto_init_analog_input(struct hda_codec *codec)
+static void alc882_auto_init_analog_input(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc883_is_input_pin(nid)) {
- alc_set_input_pin(codec, nid, i);
- if (nid != ALC883_PIN_CD_NID &&
- (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
+ if (!nid)
+ continue;
+ alc_set_input_pin(codec, nid, i);
+ if (get_wcaps(codec, nid) & AC_WCAP_OUT_AMP)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+}
+
+static void alc882_auto_init_input_src(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int c;
+
+ for (c = 0; c < spec->num_adc_nids; c++) {
+ hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
+ hda_nid_t nid = spec->capsrc_nids[c];
+ unsigned int mux_idx;
+ const struct hda_input_mux *imux;
+ int conns, mute, idx, item;
+
+ conns = snd_hda_get_connections(codec, nid, conn_list,
+ ARRAY_SIZE(conn_list));
+ if (conns < 0)
+ continue;
+ mux_idx = c >= spec->num_mux_defs ? 0 : c;
+ imux = &spec->input_mux[mux_idx];
+ for (idx = 0; idx < conns; idx++) {
+ /* if the current connection is the selected one,
+ * unmute it as default - otherwise mute it
+ */
+ mute = AMP_IN_MUTE(idx);
+ for (item = 0; item < imux->num_items; item++) {
+ if (imux->items[item].index == idx) {
+ if (spec->cur_mux[c] == item)
+ mute = AMP_IN_UNMUTE(idx);
+ break;
+ }
+ }
+ /* check if we have a selector or mixer
+ * we could check for the widget type instead, but
+ * just check for Amp-In presence (in case of mixer
+ * without amp-in there is something wrong, this
+ * function shouldn't be used or capsrc nid is wrong)
+ */
+ if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
- AMP_OUT_MUTE);
+ mute);
+ else if (mute != AMP_IN_MUTE(idx))
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ idx);
}
}
}
-#define alc883_auto_init_input_src alc882_auto_init_input_src
-
-/* almost identical with ALC880 parser... */
-static int alc883_parse_auto_config(struct hda_codec *codec)
+/* add mic boosts if needed */
+static int alc_auto_add_mic_boost(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- int err = alc880_parse_auto_config(codec);
- struct auto_pin_cfg *cfg = &spec->autocfg;
- int i;
+ int err;
+ hda_nid_t nid;
+ nid = spec->autocfg.input_pins[AUTO_PIN_MIC];
+ if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Mic Boost",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ nid = spec->autocfg.input_pins[AUTO_PIN_FRONT_MIC];
+ if (nid && (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Front Mic Boost",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/* almost identical with ALC880 parser... */
+static int alc882_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ static hda_nid_t alc882_ignore[] = { 0x1d, 0 };
+ int i, err;
+
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc882_ignore);
if (err < 0)
return err;
- else if (!err)
- return 0; /* no config found */
+ if (!spec->autocfg.line_outs)
+ return 0; /* can't find valid BIOS pin config */
+
+ err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
+ "Speaker");
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+ "Headphone");
+ if (err < 0)
+ return err;
+ err = alc882_auto_create_input_ctls(codec, &spec->autocfg);
+ if (err < 0)
+ return err;
+
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+ /* check multiple SPDIF-out (for recent codecs) */
+ for (i = 0; i < spec->autocfg.dig_outs; i++) {
+ hda_nid_t dig_nid;
+ err = snd_hda_get_connections(codec,
+ spec->autocfg.dig_out_pins[i],
+ &dig_nid, 1);
+ if (err < 0)
+ continue;
+ if (!i)
+ spec->multiout.dig_out_nid = dig_nid;
+ else {
+ spec->multiout.slave_dig_outs = spec->slave_dig_outs;
+ spec->slave_dig_outs[i - 1] = dig_nid;
+ if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ break;
+ }
+ }
+ if (spec->autocfg.dig_in_pin)
+ spec->dig_in_nid = ALC880_DIGIN_NID;
+
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
+
+ add_verb(spec, alc883_auto_init_verbs);
+ /* if ADC 0x07 is available, initialize it, too */
+ if (get_wcaps_type(get_wcaps(codec, 0x07)) == AC_WID_AUD_IN)
+ add_verb(spec, alc882_adc1_init_verbs);
+
+ spec->num_mux_defs = 1;
+ spec->input_mux = &spec->private_imux[0];
+
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14);
err = alc_auto_add_mic_boost(codec);
if (err < 0)
return err;
- /* hack - override the init verbs */
- spec->init_verbs[0] = alc883_auto_init_verbs;
-
- /* setup input_mux for ALC889 */
- if (codec->vendor_id == 0x10ec0889) {
- /* digital-mic input pin is excluded in alc880_auto_create..()
- * because it's under 0x18
- */
- if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
- cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
- struct hda_input_mux *imux = &spec->private_imux[0];
- for (i = 1; i < 3; i++)
- memcpy(&spec->private_imux[i],
- &spec->private_imux[0],
- sizeof(spec->private_imux[0]));
- imux->items[imux->num_items].label = "Int DMic";
- imux->items[imux->num_items].index = 0x0b;
- imux->num_items++;
- spec->num_mux_defs = 3;
- spec->input_mux = spec->private_imux;
- }
- }
-
return 1; /* config found */
}
/* additional initialization for auto-configuration model */
-static void alc883_auto_init(struct hda_codec *codec)
+static void alc882_auto_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- alc883_auto_init_multi_out(codec);
- alc883_auto_init_hp_out(codec);
- alc883_auto_init_analog_input(codec);
- alc883_auto_init_input_src(codec);
+ alc882_auto_init_multi_out(codec);
+ alc882_auto_init_hp_out(codec);
+ alc882_auto_init_analog_input(codec);
+ alc882_auto_init_input_src(codec);
if (spec->unsol_event)
alc_inithook(codec);
}
-static int patch_alc883(struct hda_codec *codec)
+static int patch_alc882(struct hda_codec *codec)
{
struct alc_spec *spec;
int err, board_config;
@@ -9755,28 +9833,35 @@
codec->spec = spec;
- alc_fix_pll_init(codec, 0x20, 0x0a, 10);
-
- board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
- alc883_models,
- alc883_cfg_tbl);
- if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
- /* Pick up systems that don't supply PCI SSID */
- switch (codec->subsystem_id) {
- case 0x106b3600: /* Macbook 3.1 */
- board_config = ALC889A_MB31;
- break;
- default:
- printk(KERN_INFO
- "hda_codec: Unknown model for %s, trying "
- "auto-probe from BIOS...\n", codec->chip_name);
- board_config = ALC883_AUTO;
- }
+ switch (codec->vendor_id) {
+ case 0x10ec0882:
+ case 0x10ec0885:
+ break;
+ default:
+ /* ALC883 and variants */
+ alc_fix_pll_init(codec, 0x20, 0x0a, 10);
+ break;
}
- if (board_config == ALC883_AUTO) {
+ board_config = snd_hda_check_board_config(codec, ALC882_MODEL_LAST,
+ alc882_models,
+ alc882_cfg_tbl);
+
+ if (board_config < 0 || board_config >= ALC882_MODEL_LAST)
+ board_config = snd_hda_check_board_codec_sid_config(codec,
+ ALC882_MODEL_LAST, alc882_models, alc882_ssid_cfg_tbl);
+
+ if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
+ board_config = ALC882_AUTO;
+ }
+
+ alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes);
+
+ if (board_config == ALC882_AUTO) {
/* automatic parse from the BIOS config */
- err = alc883_parse_auto_config(codec);
+ err = alc882_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
@@ -9784,7 +9869,7 @@
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
- board_config = ALC883_3ST_2ch_DIG;
+ board_config = ALC882_3ST_DIG;
}
}
@@ -9794,63 +9879,61 @@
return err;
}
- if (board_config != ALC883_AUTO)
- setup_preset(spec, &alc883_presets[board_config]);
+ if (board_config != ALC882_AUTO)
+ setup_preset(codec, &alc882_presets[board_config]);
- switch (codec->vendor_id) {
- case 0x10ec0888:
- if (!spec->num_adc_nids) {
- spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
- spec->adc_nids = alc883_adc_nids;
- }
- if (!spec->capsrc_nids)
- spec->capsrc_nids = alc883_capsrc_nids;
+ spec->stream_analog_playback = &alc882_pcm_analog_playback;
+ spec->stream_analog_capture = &alc882_pcm_analog_capture;
+ /* FIXME: setup DAC5 */
+ /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/
+ spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;
+
+ spec->stream_digital_playback = &alc882_pcm_digital_playback;
+ spec->stream_digital_capture = &alc882_pcm_digital_capture;
+
+ if (codec->vendor_id == 0x10ec0888)
spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
- break;
- case 0x10ec0889:
- if (!spec->num_adc_nids) {
- spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids);
- spec->adc_nids = alc889_adc_nids;
+
+ if (!spec->adc_nids && spec->input_mux) {
+ int i;
+ spec->num_adc_nids = 0;
+ for (i = 0; i < ARRAY_SIZE(alc882_adc_nids); i++) {
+ hda_nid_t cap;
+ hda_nid_t nid = alc882_adc_nids[i];
+ unsigned int wcap = get_wcaps(codec, nid);
+ /* get type */
+ wcap = get_wcaps_type(wcap);
+ if (wcap != AC_WID_AUD_IN)
+ continue;
+ spec->private_adc_nids[spec->num_adc_nids] = nid;
+ err = snd_hda_get_connections(codec, nid, &cap, 1);
+ if (err < 0)
+ continue;
+ spec->private_capsrc_nids[spec->num_adc_nids] = cap;
+ spec->num_adc_nids++;
}
- if (!spec->capsrc_nids)
- spec->capsrc_nids = alc889_capsrc_nids;
- break;
- default:
- if (!spec->num_adc_nids) {
- spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
- spec->adc_nids = alc883_adc_nids;
- }
- if (!spec->capsrc_nids)
- spec->capsrc_nids = alc883_capsrc_nids;
- break;
+ spec->adc_nids = spec->private_adc_nids;
+ spec->capsrc_nids = spec->private_capsrc_nids;
}
- spec->stream_analog_playback = &alc883_pcm_analog_playback;
- spec->stream_analog_capture = &alc883_pcm_analog_capture;
- spec->stream_analog_alt_capture = &alc883_pcm_analog_alt_capture;
-
- spec->stream_digital_playback = &alc883_pcm_digital_playback;
- spec->stream_digital_capture = &alc883_pcm_digital_capture;
-
- if (!spec->cap_mixer)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x0c;
codec->patch_ops = alc_patch_ops;
- if (board_config == ALC883_AUTO)
- spec->init_hook = alc883_auto_init;
-
+ if (board_config == ALC882_AUTO)
+ spec->init_hook = alc882_auto_init;
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (!spec->loopback.amplist)
- spec->loopback.amplist = alc883_loopbacks;
+ spec->loopback.amplist = alc882_loopbacks;
#endif
codec->proc_widget_hook = print_realtek_coef;
return 0;
}
+
/*
* ALC262 support
*/
@@ -10026,13 +10109,12 @@
};
/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc262_hp_t5735_init_hook(struct hda_codec *codec)
+static void alc262_hp_t5735_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
- alc_automute_amp(codec);
}
static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
@@ -10189,22 +10271,20 @@
alc262_hippo_automute(codec);
}
-static void alc262_hippo_init_hook(struct hda_codec *codec)
+static void alc262_hippo_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc262_hippo_automute(codec);
}
-static void alc262_hippo1_init_hook(struct hda_codec *codec)
+static void alc262_hippo1_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
- alc262_hippo_automute(codec);
}
@@ -10261,13 +10341,12 @@
};
/* unsolicited event for HP jack sensing */
-static void alc262_tyan_init_hook(struct hda_codec *codec)
+static void alc262_tyan_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x15;
- alc_automute_amp(codec);
}
@@ -10359,12 +10438,6 @@
{ }
};
-static struct hda_verb alc262_hippo_unsol_verbs[] = {
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- {}
-};
-
static struct hda_verb alc262_hippo1_unsol_verbs[] = {
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
@@ -10385,14 +10458,6 @@
{}
};
-static struct hda_input_mux alc262_dmic_capture_source = {
- .num_items = 2,
- .items = {
- { "Int DMic", 0x9 },
- { "Mic", 0x0 },
- },
-};
-
static struct snd_kcontrol_new alc262_toshiba_s06_mixer[] = {
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
@@ -10414,35 +10479,17 @@
{}
};
-static void alc262_dmic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x22, 0,
- AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x09);
-}
-
-
-/* unsolicited event for HP jack sensing */
-static void alc262_toshiba_s06_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc262_dmic_automute(codec);
- else
- alc_sku_unsol_event(codec, res);
-}
-
-static void alc262_toshiba_s06_init_hook(struct hda_codec *codec)
+static void alc262_toshiba_s06_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_pin(codec);
- alc262_dmic_automute(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 9;
+ spec->auto_mic = 1;
}
/*
@@ -10860,104 +10907,111 @@
{ } /* end */
};
+/* We use two mixers depending on the output pin; 0x16 is a mono output
+ * and thus it's bound with a different mixer.
+ * This function returns which mixer amp should be used.
+ */
+static int alc262_check_volbit(hda_nid_t nid)
+{
+ if (!nid)
+ return 0;
+ else if (nid == 0x16)
+ return 2;
+ else
+ return 1;
+}
+
+static int alc262_add_out_vol_ctl(struct alc_spec *spec, hda_nid_t nid,
+ const char *pfx, int *vbits)
+{
+ char name[32];
+ unsigned long val;
+ int vbit;
+
+ vbit = alc262_check_volbit(nid);
+ if (!vbit)
+ return 0;
+ if (*vbits & vbit) /* a volume control for this mixer already there */
+ return 0;
+ *vbits |= vbit;
+ snprintf(name, sizeof(name), "%s Playback Volume", pfx);
+ if (vbit == 2)
+ val = HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT);
+ else
+ val = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT);
+ return add_control(spec, ALC_CTL_WIDGET_VOL, name, val);
+}
+
+static int alc262_add_out_sw_ctl(struct alc_spec *spec, hda_nid_t nid,
+ const char *pfx)
+{
+ char name[32];
+ unsigned long val;
+
+ if (!nid)
+ return 0;
+ snprintf(name, sizeof(name), "%s Playback Switch", pfx);
+ if (nid == 0x16)
+ val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
+ else
+ val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ return add_control(spec, ALC_CTL_WIDGET_MUTE, name, val);
+}
+
/* add playback controls from the parsed DAC table */
static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
- hda_nid_t nid;
+ const char *pfx;
+ int vbits;
int err;
spec->multiout.num_dacs = 1; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
spec->multiout.dac_nids[0] = 2;
- nid = cfg->line_out_pins[0];
- if (nid) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Front Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Front Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- }
-
- nid = cfg->speaker_pins[0];
- if (nid) {
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- nid = cfg->hp_pins[0];
- if (nid) {
- /* spec->multiout.hp_nid = 2; */
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Headphone Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- return 0;
-}
-
-static int alc262_auto_create_analog_input_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- int err;
-
- err = alc880_auto_create_analog_input_ctls(spec, cfg);
+ if (!cfg->speaker_pins[0] && !cfg->hp_pins[0])
+ pfx = "Master";
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = "Front";
+ err = alc262_add_out_sw_ctl(spec, cfg->line_out_pins[0], pfx);
if (err < 0)
return err;
- /* digital-mic input pin is excluded in alc880_auto_create..()
- * because it's under 0x18
- */
- if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
- cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
- struct hda_input_mux *imux = &spec->private_imux[0];
- imux->items[imux->num_items].label = "Int Mic";
- imux->items[imux->num_items].index = 0x09;
- imux->num_items++;
- }
+ err = alc262_add_out_sw_ctl(spec, cfg->speaker_pins[0], "Speaker");
+ if (err < 0)
+ return err;
+ err = alc262_add_out_sw_ctl(spec, cfg->hp_pins[0], "Headphone");
+ if (err < 0)
+ return err;
+
+ vbits = alc262_check_volbit(cfg->line_out_pins[0]) |
+ alc262_check_volbit(cfg->speaker_pins[0]) |
+ alc262_check_volbit(cfg->hp_pins[0]);
+ if (vbits == 1 || vbits == 2)
+ pfx = "Master"; /* only one mixer is used */
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ else
+ pfx = "Front";
+ vbits = 0;
+ err = alc262_add_out_vol_ctl(spec, cfg->line_out_pins[0], pfx, &vbits);
+ if (err < 0)
+ return err;
+ err = alc262_add_out_vol_ctl(spec, cfg->speaker_pins[0], "Speaker",
+ &vbits);
+ if (err < 0)
+ return err;
+ err = alc262_add_out_vol_ctl(spec, cfg->hp_pins[0], "Headphone",
+ &vbits);
+ if (err < 0)
+ return err;
return 0;
}
+#define alc262_auto_create_input_ctls \
+ alc880_auto_create_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
@@ -11275,7 +11329,7 @@
err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc262_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -11406,7 +11460,7 @@
},
[ALC262_HIPPO] = {
.mixers = { alc262_hippo_mixer },
- .init_verbs = { alc262_init_verbs, alc262_hippo_unsol_verbs},
+ .init_verbs = { alc262_init_verbs, alc_hp15_unsol_verbs},
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
.hp_nid = 0x03,
@@ -11415,7 +11469,8 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_HIPPO_1] = {
.mixers = { alc262_hippo1_mixer },
@@ -11428,7 +11483,8 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo1_init_hook,
+ .setup = alc262_hippo1_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_FUJITSU] = {
.mixers = { alc262_fujitsu_mixer },
@@ -11491,7 +11547,8 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc262_hp_t5735_init_hook,
+ .setup = alc262_hp_t5735_setup,
+ .init_hook = alc_automute_amp,
},
[ALC262_HP_RP5700] = {
.mixers = { alc262_hp_rp5700_mixer },
@@ -11522,11 +11579,13 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_BENQ_T31] = {
.mixers = { alc262_benq_t31_mixer },
- .init_verbs = { alc262_init_verbs, alc262_benq_t31_EAPD_verbs, alc262_hippo_unsol_verbs },
+ .init_verbs = { alc262_init_verbs, alc262_benq_t31_EAPD_verbs,
+ alc_hp15_unsol_verbs },
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
.hp_nid = 0x03,
@@ -11534,7 +11593,8 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_ULTRA] = {
.mixers = { alc262_ultra_mixer },
@@ -11586,9 +11646,9 @@
.dig_out_nid = ALC262_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
- .input_mux = &alc262_dmic_capture_source,
- .unsol_event = alc262_toshiba_s06_unsol_event,
- .init_hook = alc262_toshiba_s06_init_hook,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc262_toshiba_s06_setup,
+ .init_hook = alc_inithook,
},
[ALC262_TOSHIBA_RX1] = {
.mixers = { alc262_toshiba_rx1_mixer },
@@ -11600,7 +11660,8 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc262_hippo_unsol_event,
- .init_hook = alc262_hippo_init_hook,
+ .setup = alc262_hippo_setup,
+ .init_hook = alc262_hippo_automute,
},
[ALC262_TYAN] = {
.mixers = { alc262_tyan_mixer },
@@ -11613,7 +11674,8 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc262_tyan_init_hook,
+ .setup = alc262_tyan_setup,
+ .init_hook = alc_automute_amp,
},
};
@@ -11648,8 +11710,8 @@
alc262_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC262_AUTO;
}
@@ -11676,7 +11738,7 @@
}
if (board_config != ALC262_AUTO)
- setup_preset(spec, &alc262_presets[board_config]);
+ setup_preset(codec, &alc262_presets[board_config]);
spec->stream_analog_playback = &alc262_pcm_analog_playback;
spec->stream_analog_capture = &alc262_pcm_analog_capture;
@@ -11702,7 +11764,7 @@
unsigned int wcap = get_wcaps(codec, 0x07);
/* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wcap = get_wcaps_type(wcap);
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc262_adc_nids_alt;
spec->num_adc_nids =
@@ -11717,7 +11779,7 @@
}
}
if (!spec->cap_mixer && !spec->no_analog)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
if (!spec->no_analog)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
@@ -11809,14 +11871,6 @@
{ } /* end */
};
-static struct hda_input_mux alc268_acer_lc_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x6 },
- { "E-Mic", 0x0 },
- },
-};
-
/* Acer specific */
/* bind volumes of both NID 0x02 and 0x03 */
static struct hda_bind_ctls alc268_acer_bind_master_vol = {
@@ -11935,7 +11989,8 @@
/* unsolicited event for HP jack sensing */
#define alc268_toshiba_unsol_event alc262_hippo_unsol_event
-#define alc268_toshiba_init_hook alc262_hippo_init_hook
+#define alc268_toshiba_setup alc262_hippo_setup
+#define alc268_toshiba_automute alc262_hippo_automute
static void alc268_acer_unsol_event(struct hda_codec *codec,
unsigned int res)
@@ -11965,30 +12020,33 @@
AMP_IN_MUTE(0), bits);
}
-
-static void alc268_acer_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_CONNECT_SEL,
- present ? 0x0 : 0x6);
-}
-
static void alc268_acer_lc_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- if ((res >> 26) == ALC880_HP_EVENT)
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
alc268_aspire_one_speaker_automute(codec);
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc268_acer_mic_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
+}
+
+static void alc268_acer_lc_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 6;
+ spec->auto_mic = 1;
}
static void alc268_acer_lc_init_hook(struct hda_codec *codec)
{
alc268_aspire_one_speaker_automute(codec);
- alc268_acer_mic_automute(codec);
+ alc_mic_automute(codec);
}
static struct snd_kcontrol_new alc268_dell_mixer[] = {
@@ -12006,17 +12064,22 @@
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_MIC_EVENT | AC_USRSP_EN},
{ }
};
/* mute/unmute internal speaker according to the hp jack and mute state */
-static void alc268_dell_init_hook(struct hda_codec *codec)
+static void alc268_dell_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_pin(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
static struct snd_kcontrol_new alc267_quanta_il1_mixer[] = {
@@ -12037,38 +12100,16 @@
{ }
};
-static void alc267_quanta_il1_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL,
- present ? 0x00 : 0x01);
-}
-
-static void alc267_quanta_il1_init_hook(struct hda_codec *codec)
+static void alc267_quanta_il1_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
-
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_pin(codec);
- alc267_quanta_il1_mic_automute(codec);
-}
-
-static void alc267_quanta_il1_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC880_MIC_EVENT:
- alc267_quanta_il1_mic_automute(codec);
- break;
- default:
- alc_sku_unsol_event(codec, res);
- break;
- }
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
/*
@@ -12148,21 +12189,16 @@
{ }
};
+static struct snd_kcontrol_new alc268_capture_nosrc_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+ _DEFINE_CAPSRC(1),
{ } /* end */
};
@@ -12171,18 +12207,7 @@
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+ _DEFINE_CAPSRC(2),
{ } /* end */
};
@@ -12269,26 +12294,38 @@
const char *ctlname, int idx)
{
char name[32];
+ hda_nid_t dac;
int err;
sprintf(name, "%s Playback Volume", ctlname);
- if (nid == 0x14) {
+ switch (nid) {
+ case 0x14:
+ case 0x16:
+ dac = 0x02;
+ break;
+ case 0x15:
+ dac = 0x03;
+ break;
+ default:
+ return 0;
+ }
+ if (spec->multiout.dac_nids[0] != dac &&
+ spec->multiout.dac_nids[1] != dac) {
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x02, 3, idx,
+ HDA_COMPOSE_AMP_VAL(dac, 3, idx,
HDA_OUTPUT));
if (err < 0)
return err;
- } else if (nid == 0x15) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(0x03, 3, idx,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else
- return -1;
+ spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
+ }
+
sprintf(name, "%s Playback Switch", ctlname);
- err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ if (nid != 0x16)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
+ else /* mono */
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 2, idx, HDA_OUTPUT));
if (err < 0)
return err;
return 0;
@@ -12301,14 +12338,19 @@
hda_nid_t nid;
int err;
- spec->multiout.num_dacs = 2; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.dac_nids[0] = 2;
- spec->multiout.dac_nids[1] = 3;
nid = cfg->line_out_pins[0];
- if (nid)
- alc268_new_analog_output(spec, nid, "Front", 0);
+ if (nid) {
+ const char *name;
+ if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ name = "Speaker";
+ else
+ name = "Front";
+ err = alc268_new_analog_output(spec, nid, name, 0);
+ if (err < 0)
+ return err;
+ }
nid = cfg->speaker_pins[0];
if (nid == 0x1d) {
@@ -12317,16 +12359,23 @@
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
if (err < 0)
return err;
+ } else {
+ err = alc268_new_analog_output(spec, nid, "Speaker", 0);
+ if (err < 0)
+ return err;
}
nid = cfg->hp_pins[0];
- if (nid)
- alc268_new_analog_output(spec, nid, "Headphone", 0);
+ if (nid) {
+ err = alc268_new_analog_output(spec, nid, "Headphone", 0);
+ if (err < 0)
+ return err;
+ }
nid = cfg->line_out_pins[1] | cfg->line_out_pins[2];
if (nid == 0x16) {
err = add_control(spec, ALC_CTL_WIDGET_MUTE,
"Mono Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_INPUT));
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT));
if (err < 0)
return err;
}
@@ -12334,38 +12383,46 @@
}
/* create playback/capture controls for input pins */
-static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec,
+static int alc268_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, idx1;
+ return alc_auto_create_input_ctls(codec, cfg, 0, 0x23, 0x24);
+}
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- switch(cfg->input_pins[i]) {
- case 0x18:
- idx1 = 0; /* Mic 1 */
- break;
- case 0x19:
- idx1 = 1; /* Mic 2 */
- break;
- case 0x1a:
- idx1 = 2; /* Line In */
- break;
- case 0x1c:
- idx1 = 3; /* CD */
- break;
- case 0x12:
- case 0x13:
- idx1 = 6; /* digital mics */
- break;
- default:
- continue;
- }
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx1;
- imux->num_items++;
+static void alc268_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type)
+{
+ int idx;
+
+ alc_set_pin_output(codec, nid, pin_type);
+ if (nid == 0x14 || nid == 0x16)
+ idx = 0;
+ else
+ idx = 1;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
+}
+
+static void alc268_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t nid = spec->autocfg.line_out_pins[0];
+ if (nid) {
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
+ alc268_auto_set_output_and_unmute(codec, nid, pin_type);
}
- return 0;
+}
+
+static void alc268_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pins[0];
+ if (pin)
+ alc268_auto_set_output_and_unmute(codec, pin, PIN_HP);
+ pin = spec->autocfg.speaker_pins[0];
+ if (pin)
+ alc268_auto_set_output_and_unmute(codec, pin, PIN_OUT);
}
static void alc268_auto_init_mono_speaker_out(struct hda_codec *codec)
@@ -12376,9 +12433,10 @@
hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
unsigned int dac_vol1, dac_vol2;
- if (speaker_nid) {
+ if (line_nid == 0x1d || speaker_nid == 0x1d) {
snd_hda_codec_write(codec, speaker_nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ /* mute mixer inputs from 0x1d */
snd_hda_codec_write(codec, 0x0f, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_IN_UNMUTE(1));
@@ -12386,6 +12444,7 @@
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_IN_UNMUTE(1));
} else {
+ /* unmute mixer inputs from 0x1d */
snd_hda_codec_write(codec, 0x0f, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
snd_hda_codec_write(codec, 0x10, 0,
@@ -12442,7 +12501,7 @@
err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- err = alc268_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc268_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -12461,7 +12520,7 @@
add_mixer(spec, alc268_beep_mixer);
add_verb(spec, alc268_volume_init_verbs);
- spec->num_mux_defs = 1;
+ spec->num_mux_defs = 2;
spec->input_mux = &spec->private_imux[0];
err = alc_auto_add_mic_boost(codec);
@@ -12473,8 +12532,6 @@
return 1;
}
-#define alc268_auto_init_multi_out alc882_auto_init_multi_out
-#define alc268_auto_init_hp_out alc882_auto_init_hp_out
#define alc268_auto_init_analog_input alc882_auto_init_analog_input
/* init callback for auto-configuration model -- overriding the default init */
@@ -12517,8 +12574,11 @@
ALC268_ACER_ASPIRE_ONE),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
+ /* almost compatible with toshiba but with optional digital outs;
+ * auto-probing seems working fine
+ */
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP TX25xx series",
- ALC268_TOSHIBA),
+ ALC268_AUTO),
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
@@ -12539,7 +12599,8 @@
static struct alc_config_preset alc268_presets[] = {
[ALC267_QUANTA_IL1] = {
- .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
+ .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer,
+ alc268_capture_nosrc_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc267_quanta_il1_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
@@ -12549,9 +12610,9 @@
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
- .input_mux = &alc268_capture_source,
- .unsol_event = alc267_quanta_il1_unsol_event,
- .init_hook = alc267_quanta_il1_init_hook,
+ .unsol_event = alc_sku_unsol_event,
+ .setup = alc267_quanta_il1_setup,
+ .init_hook = alc_inithook,
},
[ALC268_3ST] = {
.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
@@ -12583,10 +12644,11 @@
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
.unsol_event = alc268_toshiba_unsol_event,
- .init_hook = alc268_toshiba_init_hook,
+ .setup = alc268_toshiba_setup,
+ .init_hook = alc268_toshiba_automute,
},
[ALC268_ACER] = {
- .mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
+ .mixers = { alc268_acer_mixer, alc268_capture_nosrc_mixer,
alc268_beep_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_verbs },
@@ -12622,7 +12684,7 @@
[ALC268_ACER_ASPIRE_ONE] = {
.mixers = { alc268_acer_aspire_one_mixer,
alc268_beep_mixer,
- alc268_capture_alt_mixer },
+ alc268_capture_nosrc_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_aspire_one_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
@@ -12633,22 +12695,26 @@
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
- .input_mux = &alc268_acer_lc_capture_source,
.unsol_event = alc268_acer_lc_unsol_event,
+ .setup = alc268_acer_lc_setup,
.init_hook = alc268_acer_lc_init_hook,
},
[ALC268_DELL] = {
- .mixers = { alc268_dell_mixer, alc268_beep_mixer },
+ .mixers = { alc268_dell_mixer, alc268_beep_mixer,
+ alc268_capture_nosrc_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_dell_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.dac_nids = alc268_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
+ .adc_nids = alc268_adc_nids_alt,
+ .capsrc_nids = alc268_capsrc_nids,
.hp_nid = 0x02,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.unsol_event = alc_sku_unsol_event,
- .init_hook = alc268_dell_init_hook,
- .input_mux = &alc268_capture_source,
+ .setup = alc268_dell_setup,
+ .init_hook = alc_inithook,
},
[ALC268_ZEPTO] = {
.mixers = { alc268_base_mixer, alc268_capture_alt_mixer,
@@ -12665,8 +12731,8 @@
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
- .unsol_event = alc268_toshiba_unsol_event,
- .init_hook = alc268_toshiba_init_hook
+ .setup = alc268_toshiba_setup,
+ .init_hook = alc268_toshiba_automute,
},
#ifdef CONFIG_SND_DEBUG
[ALC268_TEST] = {
@@ -12708,8 +12774,8 @@
ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC268_AUTO;
}
@@ -12728,7 +12794,7 @@
}
if (board_config != ALC268_AUTO)
- setup_preset(spec, &alc268_presets[board_config]);
+ setup_preset(codec, &alc268_presets[board_config]);
spec->stream_analog_playback = &alc268_pcm_analog_playback;
spec->stream_analog_capture = &alc268_pcm_analog_capture;
@@ -12765,11 +12831,15 @@
int i;
/* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
+ wcap = get_wcaps_type(wcap);
+ if (spec->auto_mic ||
+ wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
spec->adc_nids = alc268_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt);
- add_mixer(spec, alc268_capture_alt_mixer);
+ if (spec->auto_mic || spec->input_mux->num_items == 1)
+ add_mixer(spec, alc268_capture_nosrc_mixer);
+ else
+ add_mixer(spec, alc268_capture_alt_mixer);
} else {
spec->adc_nids = alc268_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids);
@@ -12780,6 +12850,8 @@
for (i = 0; i < spec->num_adc_nids; i++)
snd_hda_codec_write_cache(codec, alc268_capsrc_nids[i],
0, AC_VERB_SET_CONNECT_SEL,
+ i < spec->num_mux_defs ?
+ spec->input_mux[i].items[0].index :
spec->input_mux->items[0].index);
}
@@ -12814,22 +12886,6 @@
* not a mux!
*/
-static struct hda_input_mux alc269_eeepc_dmic_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x5 },
- { "e-Mic", 0x0 },
- },
-};
-
-static struct hda_input_mux alc269_eeepc_amic_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x1 },
- { "e-Mic", 0x0 },
- },
-};
-
#define alc269_modes alc260_modes
#define alc269_capture_source alc880_lg_lw_capture_source
@@ -12991,16 +13047,6 @@
AC_VERB_SET_PROC_COEF, 0x480);
}
-static void alc269_quanta_fl1_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x1);
-}
-
static void alc269_lifebook_mic_autoswitch(struct hda_codec *codec)
{
unsigned int present_laptop;
@@ -13027,10 +13073,14 @@
static void alc269_quanta_fl1_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- if ((res >> 26) == ALC880_HP_EVENT)
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
alc269_quanta_fl1_speaker_automute(codec);
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc269_quanta_fl1_mic_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
}
static void alc269_lifebook_unsol_event(struct hda_codec *codec,
@@ -13042,10 +13092,20 @@
alc269_lifebook_mic_autoswitch(codec);
}
+static void alc269_quanta_fl1_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
+}
+
static void alc269_quanta_fl1_init_hook(struct hda_codec *codec)
{
alc269_quanta_fl1_speaker_automute(codec);
- alc269_quanta_fl1_mic_automute(codec);
+ alc_mic_automute(codec);
}
static void alc269_lifebook_init_hook(struct hda_codec *codec)
@@ -13090,60 +13150,44 @@
AMP_IN_MUTE(0), bits);
}
-static void alc269_eeepc_dmic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x23, 0,
- AC_VERB_SET_CONNECT_SEL, (present ? 0 : 5));
-}
-
-static void alc269_eeepc_amic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
-}
-
/* unsolicited event for HP jack sensing */
-static void alc269_eeepc_dmic_unsol_event(struct hda_codec *codec,
+static void alc269_eeepc_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- if ((res >> 26) == ALC880_HP_EVENT)
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
alc269_speaker_automute(codec);
-
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc269_eeepc_dmic_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc_mic_automute(codec);
+ break;
+ }
}
-static void alc269_eeepc_dmic_inithook(struct hda_codec *codec)
+static void alc269_eeepc_dmic_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 5;
+ spec->auto_mic = 1;
+}
+
+static void alc269_eeepc_amic_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
+}
+
+static void alc269_eeepc_inithook(struct hda_codec *codec)
{
alc269_speaker_automute(codec);
- alc269_eeepc_dmic_automute(codec);
-}
-
-/* unsolicited event for HP jack sensing */
-static void alc269_eeepc_amic_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- if ((res >> 26) == ALC880_HP_EVENT)
- alc269_speaker_automute(codec);
-
- if ((res >> 26) == ALC880_MIC_EVENT)
- alc269_eeepc_amic_automute(codec);
-}
-
-static void alc269_eeepc_amic_inithook(struct hda_codec *codec)
-{
- alc269_speaker_automute(codec);
- alc269_eeepc_amic_automute(codec);
+ alc_mic_automute(codec);
}
/*
@@ -13216,89 +13260,10 @@
{ }
};
-/* add playback controls from the parsed DAC table */
-static int alc269_auto_create_multi_out_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- hda_nid_t nid;
- int err;
-
- spec->multiout.num_dacs = 1; /* only use one dac */
- spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.dac_nids[0] = 2;
-
- nid = cfg->line_out_pins[0];
- if (nid) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Front Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Front Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- }
-
- nid = cfg->speaker_pins[0];
- if (nid) {
- if (!cfg->line_out_pins[0]) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- nid = cfg->hp_pins[0];
- if (nid) {
- /* spec->multiout.hp_nid = 2; */
- if (!cfg->line_out_pins[0] && !cfg->speaker_pins[0]) {
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Headphone Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- if (nid == 0x16) {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- } else {
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- }
- return 0;
-}
-
-#define alc269_auto_create_analog_input_ctls \
- alc262_auto_create_analog_input_ctls
+#define alc269_auto_create_multi_out_ctls \
+ alc268_auto_create_multi_out_ctls
+#define alc269_auto_create_input_ctls \
+ alc268_auto_create_input_ctls
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc269_loopbacks alc880_loopbacks
@@ -13348,7 +13313,7 @@
err = alc269_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- err = alc269_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc269_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -13373,15 +13338,15 @@
return err;
if (!spec->cap_mixer && !spec->no_analog)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
alc_ssid_check(codec, 0x15, 0x1b, 0x14);
return 1;
}
-#define alc269_auto_init_multi_out alc882_auto_init_multi_out
-#define alc269_auto_init_hp_out alc882_auto_init_hp_out
+#define alc269_auto_init_multi_out alc268_auto_init_multi_out
+#define alc269_auto_init_hp_out alc268_auto_init_hp_out
#define alc269_auto_init_analog_input alc882_auto_init_analog_input
@@ -13449,6 +13414,7 @@
.channel_mode = alc269_modes,
.input_mux = &alc269_capture_source,
.unsol_event = alc269_quanta_fl1_unsol_event,
+ .setup = alc269_quanta_fl1_setup,
.init_hook = alc269_quanta_fl1_init_hook,
},
[ALC269_ASUS_EEEPC_P703] = {
@@ -13461,9 +13427,9 @@
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .input_mux = &alc269_eeepc_amic_capture_source,
- .unsol_event = alc269_eeepc_amic_unsol_event,
- .init_hook = alc269_eeepc_amic_inithook,
+ .unsol_event = alc269_eeepc_unsol_event,
+ .setup = alc269_eeepc_amic_setup,
+ .init_hook = alc269_eeepc_inithook,
},
[ALC269_ASUS_EEEPC_P901] = {
.mixers = { alc269_eeepc_mixer },
@@ -13475,9 +13441,9 @@
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .input_mux = &alc269_eeepc_dmic_capture_source,
- .unsol_event = alc269_eeepc_dmic_unsol_event,
- .init_hook = alc269_eeepc_dmic_inithook,
+ .unsol_event = alc269_eeepc_unsol_event,
+ .setup = alc269_eeepc_dmic_setup,
+ .init_hook = alc269_eeepc_inithook,
},
[ALC269_FUJITSU] = {
.mixers = { alc269_fujitsu_mixer },
@@ -13489,9 +13455,9 @@
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc269_modes),
.channel_mode = alc269_modes,
- .input_mux = &alc269_eeepc_dmic_capture_source,
- .unsol_event = alc269_eeepc_dmic_unsol_event,
- .init_hook = alc269_eeepc_dmic_inithook,
+ .unsol_event = alc269_eeepc_unsol_event,
+ .setup = alc269_eeepc_dmic_setup,
+ .init_hook = alc269_eeepc_inithook,
},
[ALC269_LIFEBOOK] = {
.mixers = { alc269_lifebook_mixer },
@@ -13526,8 +13492,8 @@
alc269_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC269_AUTO;
}
@@ -13552,7 +13518,7 @@
}
if (board_config != ALC269_AUTO)
- setup_preset(spec, &alc269_presets[board_config]);
+ setup_preset(codec, &alc269_presets[board_config]);
if (codec->subsystem_id == 0x17aa3bf8) {
/* Due to a hardware problem on Lenovo Ideadpad, we need to
@@ -13571,7 +13537,7 @@
spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
spec->capsrc_nids = alc269_capsrc_nids;
if (!spec->cap_mixer)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
spec->vmaster_nid = 0x02;
@@ -14121,23 +14087,23 @@
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, /* set Mic 1 */
@@ -14209,64 +14175,96 @@
},
};
+static hda_nid_t alc861_look_for_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t mix, srcs[5];
+ int i, j, num;
+
+ if (snd_hda_get_connections(codec, pin, &mix, 1) != 1)
+ return 0;
+ num = snd_hda_get_connections(codec, mix, srcs, ARRAY_SIZE(srcs));
+ if (num < 0)
+ return 0;
+ for (i = 0; i < num; i++) {
+ unsigned int type;
+ type = get_wcaps_type(get_wcaps(codec, srcs[i]));
+ if (type != AC_WID_AUD_OUT)
+ continue;
+ for (j = 0; j < spec->multiout.num_dacs; j++)
+ if (spec->multiout.dac_nids[j] == srcs[i])
+ break;
+ if (j >= spec->multiout.num_dacs)
+ return srcs[i];
+ }
+ return 0;
+}
+
/* fill in the dac_nids table from the parsed pin configuration */
-static int alc861_auto_fill_dac_nids(struct alc_spec *spec,
+static int alc861_auto_fill_dac_nids(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
+ struct alc_spec *spec = codec->spec;
int i;
- hda_nid_t nid;
+ hda_nid_t nid, dac;
spec->multiout.dac_nids = spec->private_dac_nids;
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
- if (nid) {
- if (i >= ARRAY_SIZE(alc861_dac_nids))
- continue;
- spec->multiout.dac_nids[i] = alc861_dac_nids[i];
- }
+ dac = alc861_look_for_dac(codec, nid);
+ if (!dac)
+ continue;
+ spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
}
- spec->multiout.num_dacs = cfg->line_outs;
return 0;
}
-/* add playback controls from the parsed DAC table */
-static int alc861_auto_create_multi_out_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
+static int alc861_create_out_sw(struct hda_codec *codec, const char *pfx,
+ hda_nid_t nid, unsigned int chs)
{
char name[32];
+ snprintf(name, sizeof(name), "%s Playback Switch", pfx);
+ return add_control(codec->spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+}
+
+/* add playback controls from the parsed DAC table */
+static int alc861_auto_create_multi_out_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ struct alc_spec *spec = codec->spec;
static const char *chname[4] = {
"Front", "Surround", NULL /*CLFE*/, "Side"
};
hda_nid_t nid;
- int i, idx, err;
+ int i, err;
+
+ if (cfg->line_outs == 1) {
+ const char *pfx = NULL;
+ if (!cfg->hp_outs)
+ pfx = "Master";
+ else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ if (pfx) {
+ nid = spec->multiout.dac_nids[0];
+ return alc861_create_out_sw(codec, pfx, nid, 3);
+ }
+ }
for (i = 0; i < cfg->line_outs; i++) {
nid = spec->multiout.dac_nids[i];
if (!nid)
continue;
- if (nid == 0x05) {
+ if (i == 2) {
/* Center/LFE */
- err = add_control(spec, ALC_CTL_BIND_MUTE,
- "Center Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 1, 0,
- HDA_OUTPUT));
+ err = alc861_create_out_sw(codec, "Center", nid, 1);
if (err < 0)
return err;
- err = add_control(spec, ALC_CTL_BIND_MUTE,
- "LFE Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
+ err = alc861_create_out_sw(codec, "LFE", nid, 2);
if (err < 0)
return err;
} else {
- for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1;
- idx++)
- if (nid == alc861_dac_nids[idx])
- break;
- sprintf(name, "%s Playback Switch", chname[idx]);
- err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
+ err = alc861_create_out_sw(codec, chname[i], nid, 3);
if (err < 0)
return err;
}
@@ -14274,8 +14272,9 @@
return 0;
}
-static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
+static int alc861_auto_create_hp_ctls(struct hda_codec *codec, hda_nid_t pin)
{
+ struct alc_spec *spec = codec->spec;
int err;
hda_nid_t nid;
@@ -14283,70 +14282,49 @@
return 0;
if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) {
- nid = 0x03;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- spec->multiout.hp_nid = nid;
+ nid = alc861_look_for_dac(codec, pin);
+ if (nid) {
+ err = alc861_create_out_sw(codec, "Headphone", nid, 3);
+ if (err < 0)
+ return err;
+ spec->multiout.hp_nid = nid;
+ }
}
return 0;
}
/* create playback/capture controls for input pins */
-static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec,
+static int alc861_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, err, idx, idx1;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- switch (cfg->input_pins[i]) {
- case 0x0c:
- idx1 = 1;
- idx = 2; /* Line In */
- break;
- case 0x0f:
- idx1 = 2;
- idx = 2; /* Line In */
- break;
- case 0x0d:
- idx1 = 0;
- idx = 1; /* Mic In */
- break;
- case 0x10:
- idx1 = 3;
- idx = 1; /* Mic In */
- break;
- case 0x11:
- idx1 = 4;
- idx = 0; /* CD */
- break;
- default:
- continue;
- }
-
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx, 0x15);
- if (err < 0)
- return err;
-
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx1;
- imux->num_items++;
- }
- return 0;
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x08, 0);
}
static void alc861_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid,
- int pin_type, int dac_idx)
+ int pin_type, hda_nid_t dac)
{
+ hda_nid_t mix, srcs[5];
+ int i, num;
+
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pin_type);
- snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_UNMUTE);
+ if (snd_hda_get_connections(codec, nid, &mix, 1) != 1)
+ return;
+ num = snd_hda_get_connections(codec, mix, srcs, ARRAY_SIZE(srcs));
+ if (num < 0)
+ return;
+ for (i = 0; i < num; i++) {
+ unsigned int mute;
+ if (srcs[i] == dac || srcs[i] == 0x15)
+ mute = AMP_IN_UNMUTE(i);
+ else
+ mute = AMP_IN_MUTE(i);
+ snd_hda_codec_write(codec, mix, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ mute);
+ }
}
static void alc861_auto_init_multi_out(struct hda_codec *codec)
@@ -14369,12 +14347,13 @@
hda_nid_t pin;
pin = spec->autocfg.hp_pins[0];
- if (pin) /* connect to front */
+ if (pin)
alc861_auto_set_output_and_unmute(codec, pin, PIN_HP,
- spec->multiout.dac_nids[0]);
+ spec->multiout.hp_nid);
pin = spec->autocfg.speaker_pins[0];
if (pin)
- alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+ alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+ spec->multiout.dac_nids[0]);
}
static void alc861_auto_init_analog_input(struct hda_codec *codec)
@@ -14406,16 +14385,16 @@
if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- err = alc861_auto_fill_dac_nids(spec, &spec->autocfg);
+ err = alc861_auto_fill_dac_nids(codec, &spec->autocfg);
if (err < 0)
return err;
- err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ err = alc861_auto_create_multi_out_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
- err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+ err = alc861_auto_create_hp_ctls(codec, spec->autocfg.hp_pins[0]);
if (err < 0)
return err;
- err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc861_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -14434,7 +14413,7 @@
spec->adc_nids = alc861_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
alc_ssid_check(codec, 0x0e, 0x0f, 0x0b);
@@ -14627,8 +14606,8 @@
alc861_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC861_AUTO;
}
@@ -14653,7 +14632,7 @@
}
if (board_config != ALC861_AUTO)
- setup_preset(spec, &alc861_presets[board_config]);
+ setup_preset(codec, &alc861_presets[board_config]);
spec->stream_analog_playback = &alc861_pcm_analog_playback;
spec->stream_analog_capture = &alc861_pcm_analog_capture;
@@ -15056,12 +15035,15 @@
HDA_AMP_MUTE, bits);
}
-static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
+static void alc861vd_lenovo_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
-
spec->autocfg.hp_pins[0] = 0x1b;
spec->autocfg.speaker_pins[0] = 0x14;
+}
+
+static void alc861vd_lenovo_init_hook(struct hda_codec *codec)
+{
alc_automute_amp(codec);
alc861vd_lenovo_mic_automute(codec);
}
@@ -15125,13 +15107,12 @@
};
/* toggle speaker-output according to the hp-jack state */
-static void alc861vd_dallas_init_hook(struct hda_codec *codec)
+static void alc861vd_dallas_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- alc_automute_amp(codec);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -15245,6 +15226,7 @@
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_capture_source,
.unsol_event = alc861vd_lenovo_unsol_event,
+ .setup = alc861vd_lenovo_setup,
.init_hook = alc861vd_lenovo_init_hook,
},
[ALC861VD_DALLAS] = {
@@ -15256,7 +15238,8 @@
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_dallas_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc861vd_dallas_init_hook,
+ .setup = alc861vd_dallas_setup,
+ .init_hook = alc_automute_amp,
},
[ALC861VD_HP] = {
.mixers = { alc861vd_hp_mixer },
@@ -15268,7 +15251,8 @@
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_hp_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc861vd_dallas_init_hook,
+ .setup = alc861vd_dallas_setup,
+ .init_hook = alc_automute_amp,
},
[ALC660VD_ASUS_V1S] = {
.mixers = { alc861vd_lenovo_mixer },
@@ -15283,6 +15267,7 @@
.channel_mode = alc861vd_3stack_2ch_modes,
.input_mux = &alc861vd_capture_source,
.unsol_event = alc861vd_lenovo_unsol_event,
+ .setup = alc861vd_lenovo_setup,
.init_hook = alc861vd_lenovo_init_hook,
},
};
@@ -15290,6 +15275,13 @@
/*
* BIOS auto configuration
*/
+static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+}
+
+
static void alc861vd_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type, int dac_idx)
{
@@ -15324,7 +15316,6 @@
alc861vd_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
}
-#define alc861vd_is_input_pin(nid) alc880_is_input_pin(nid)
#define ALC861VD_PIN_CD_NID ALC880_PIN_CD_NID
static void alc861vd_auto_init_analog_input(struct hda_codec *codec)
@@ -15334,7 +15325,7 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc861vd_is_input_pin(nid)) {
+ if (alc_is_input_pin(codec, nid)) {
alc_set_input_pin(codec, nid, i);
if (nid != ALC861VD_PIN_CD_NID &&
(get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
@@ -15398,13 +15389,25 @@
if (err < 0)
return err;
} else {
- sprintf(name, "%s Playback Volume", chname[i]);
+ const char *pfx;
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ if (!cfg->hp_pins)
+ pfx = "Speaker";
+ else
+ pfx = "PCM";
+ } else
+ pfx = chname[i];
+ sprintf(name, "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid_v, 3, 0,
HDA_OUTPUT));
if (err < 0)
return err;
- sprintf(name, "%s Playback Switch", chname[i]);
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ sprintf(name, "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_BIND_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid_s, 3, 2,
HDA_INPUT));
@@ -15497,7 +15500,7 @@
"Headphone");
if (err < 0)
return err;
- err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ err = alc861vd_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -15551,8 +15554,8 @@
alc861vd_cfg_tbl);
if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC861VD_AUTO;
}
@@ -15577,7 +15580,7 @@
}
if (board_config != ALC861VD_AUTO)
- setup_preset(spec, &alc861vd_presets[board_config]);
+ setup_preset(codec, &alc861vd_presets[board_config]);
if (codec->vendor_id == 0x10ec0660) {
/* always turn on EAPD */
@@ -15597,7 +15600,7 @@
if (!spec->capsrc_nids)
spec->capsrc_nids = alc861vd_capsrc_nids;
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
spec->vmaster_nid = 0x02;
@@ -15638,9 +15641,9 @@
0x02, 0x03
};
-static hda_nid_t alc662_adc_nids[1] = {
+static hda_nid_t alc662_adc_nids[2] = {
/* ADC1-2 */
- 0x09,
+ 0x09, 0x08
};
static hda_nid_t alc272_adc_nids[1] = {
@@ -15648,7 +15651,7 @@
0x08,
};
-static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc662_capsrc_nids[2] = { 0x22, 0x23 };
static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
@@ -15672,14 +15675,6 @@
},
};
-static struct hda_input_mux alc662_eeepc_capture_source = {
- .num_items = 2,
- .items = {
- { "i-Mic", 0x1 },
- { "e-Mic", 0x0 },
- },
-};
-
static struct hda_input_mux alc663_capture_source = {
.num_items = 3,
.items = {
@@ -15689,23 +15684,7 @@
},
};
-static struct hda_input_mux alc663_m51va_capture_source = {
- .num_items = 2,
- .items = {
- { "Ext-Mic", 0x0 },
- { "D-Mic", 0x9 },
- },
-};
-
-#if 1 /* set to 0 for testing other input sources below */
-static struct hda_input_mux alc272_nc10_capture_source = {
- .num_items = 2,
- .items = {
- { "Autoselect Mic", 0x0 },
- { "Internal Mic", 0x1 },
- },
-};
-#else
+#if 0 /* set to 1 for testing other input sources below */
static struct hda_input_mux alc272_nc10_capture_source = {
.num_items = 16,
.items = {
@@ -16374,47 +16353,44 @@
alc662_lenovo_101e_ispeaker_automute(codec);
}
-static void alc662_eeepc_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
- snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
-}
-
/* unsolicited event for HP jack sensing */
static void alc662_eeepc_unsol_event(struct hda_codec *codec,
unsigned int res)
{
if ((res >> 26) == ALC880_MIC_EVENT)
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
else
alc262_hippo_unsol_event(codec, res);
}
-static void alc662_eeepc_inithook(struct hda_codec *codec)
+static void alc662_eeepc_setup(struct hda_codec *codec)
{
- alc262_hippo1_init_hook(codec);
- alc662_eeepc_mic_automute(codec);
+ struct alc_spec *spec = codec->spec;
+
+ alc262_hippo1_setup(codec);
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x19;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
}
-static void alc662_eeepc_ep20_inithook(struct hda_codec *codec)
+static void alc662_eeepc_inithook(struct hda_codec *codec)
+{
+ alc262_hippo_automute(codec);
+ alc_mic_automute(codec);
+}
+
+static void alc662_eeepc_ep20_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
spec->autocfg.speaker_pins[0] = 0x1b;
- alc262_hippo_master_update(codec);
}
+#define alc662_eeepc_ep20_inithook alc262_hippo_master_update
+
static void alc663_m51va_speaker_automute(struct hda_codec *codec)
{
unsigned int present;
@@ -16525,23 +16501,6 @@
}
}
-static void alc663_m51va_mic_automute(struct hda_codec *codec)
-{
- unsigned int present;
-
- present = snd_hda_codec_read(codec, 0x18, 0,
- AC_VERB_GET_PIN_SENSE, 0)
- & AC_PINSENSE_PRESENCE;
- snd_hda_codec_write_cache(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write_cache(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x00 << 8) | (present ? 0 : 0x80));
- snd_hda_codec_write_cache(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x09 << 8) | (present ? 0x80 : 0));
- snd_hda_codec_write_cache(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x09 << 8) | (present ? 0x80 : 0));
-}
-
static void alc663_m51va_unsol_event(struct hda_codec *codec,
unsigned int res)
{
@@ -16550,36 +16509,32 @@
alc663_m51va_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc663_m51va_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+static void alc663_m51va_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ spec->ext_mic.pin = 0x18;
+ spec->ext_mic.mux_idx = 0;
+ spec->int_mic.pin = 0x12;
+ spec->int_mic.mux_idx = 1;
+ spec->auto_mic = 1;
+}
+
static void alc663_m51va_inithook(struct hda_codec *codec)
{
alc663_m51va_speaker_automute(codec);
- alc663_m51va_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode1 ******************************/
-static void alc663_mode1_unsol_event(struct hda_codec *codec,
- unsigned int res)
-{
- switch (res >> 26) {
- case ALC880_HP_EVENT:
- alc663_m51va_speaker_automute(codec);
- break;
- case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
- break;
- }
-}
+#define alc663_mode1_unsol_event alc663_m51va_unsol_event
+#define alc663_mode1_setup alc663_m51va_setup
+#define alc663_mode1_inithook alc663_m51va_inithook
-static void alc663_mode1_inithook(struct hda_codec *codec)
-{
- alc663_m51va_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
-}
/* ***************** Mode2 ******************************/
static void alc662_mode2_unsol_event(struct hda_codec *codec,
unsigned int res)
@@ -16589,15 +16544,17 @@
alc662_f5z_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc662_mode2_setup alc663_m51va_setup
+
static void alc662_mode2_inithook(struct hda_codec *codec)
{
alc662_f5z_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode3 ******************************/
static void alc663_mode3_unsol_event(struct hda_codec *codec,
@@ -16608,15 +16565,17 @@
alc663_two_hp_m1_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode3_setup alc663_m51va_setup
+
static void alc663_mode3_inithook(struct hda_codec *codec)
{
alc663_two_hp_m1_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode4 ******************************/
static void alc663_mode4_unsol_event(struct hda_codec *codec,
@@ -16627,15 +16586,17 @@
alc663_21jd_two_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode4_setup alc663_m51va_setup
+
static void alc663_mode4_inithook(struct hda_codec *codec)
{
alc663_21jd_two_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode5 ******************************/
static void alc663_mode5_unsol_event(struct hda_codec *codec,
@@ -16646,15 +16607,17 @@
alc663_15jd_two_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode5_setup alc663_m51va_setup
+
static void alc663_mode5_inithook(struct hda_codec *codec)
{
alc663_15jd_two_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
/* ***************** Mode6 ******************************/
static void alc663_mode6_unsol_event(struct hda_codec *codec,
@@ -16665,15 +16628,17 @@
alc663_two_hp_m2_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_mode6_setup alc663_m51va_setup
+
static void alc663_mode6_inithook(struct hda_codec *codec)
{
alc663_two_hp_m2_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
static void alc663_g71v_hp_automute(struct hda_codec *codec)
@@ -16715,16 +16680,18 @@
alc663_g71v_front_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_g71v_setup alc663_m51va_setup
+
static void alc663_g71v_inithook(struct hda_codec *codec)
{
alc663_g71v_front_automute(codec);
alc663_g71v_hp_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
static void alc663_g50v_unsol_event(struct hda_codec *codec,
@@ -16735,15 +16702,17 @@
alc663_m51va_speaker_automute(codec);
break;
case ALC880_MIC_EVENT:
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
break;
}
}
+#define alc663_g50v_setup alc663_m51va_setup
+
static void alc663_g50v_inithook(struct hda_codec *codec)
{
alc663_m51va_speaker_automute(codec);
- alc662_eeepc_mic_automute(codec);
+ alc_mic_automute(codec);
}
static struct snd_kcontrol_new alc662_ecs_mixer[] = {
@@ -16947,8 +16916,8 @@
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc662_eeepc_unsol_event,
+ .setup = alc662_eeepc_setup,
.init_hook = alc662_eeepc_inithook,
},
[ALC662_ASUS_EEEPC_EP20] = {
@@ -16962,6 +16931,7 @@
.channel_mode = alc662_3ST_6ch_modes,
.input_mux = &alc662_lenovo_101e_capture_source,
.unsol_event = alc662_eeepc_unsol_event,
+ .setup = alc662_eeepc_ep20_setup,
.init_hook = alc662_eeepc_ep20_inithook,
},
[ALC662_ECS] = {
@@ -16972,8 +16942,8 @@
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc662_eeepc_unsol_event,
+ .setup = alc662_eeepc_setup,
.init_hook = alc662_eeepc_inithook,
},
[ALC663_ASUS_M51VA] = {
@@ -16984,8 +16954,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
+ .setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
[ALC663_ASUS_G71V] = {
@@ -16996,8 +16966,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_g71v_unsol_event,
+ .setup = alc663_g71v_setup,
.init_hook = alc663_g71v_inithook,
},
[ALC663_ASUS_H13] = {
@@ -17007,7 +16977,6 @@
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
.init_hook = alc663_m51va_inithook,
},
@@ -17021,6 +16990,7 @@
.channel_mode = alc662_3ST_6ch_modes,
.input_mux = &alc663_capture_source,
.unsol_event = alc663_g50v_unsol_event,
+ .setup = alc663_g50v_setup,
.init_hook = alc663_g50v_inithook,
},
[ALC663_ASUS_MODE1] = {
@@ -17034,8 +17004,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode1_unsol_event,
+ .setup = alc663_mode1_setup,
.init_hook = alc663_mode1_inithook,
},
[ALC662_ASUS_MODE2] = {
@@ -17048,8 +17018,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc662_mode2_unsol_event,
+ .setup = alc662_mode2_setup,
.init_hook = alc662_mode2_inithook,
},
[ALC663_ASUS_MODE3] = {
@@ -17063,8 +17033,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode3_unsol_event,
+ .setup = alc663_mode3_setup,
.init_hook = alc663_mode3_inithook,
},
[ALC663_ASUS_MODE4] = {
@@ -17078,8 +17048,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode4_unsol_event,
+ .setup = alc663_mode4_setup,
.init_hook = alc663_mode4_inithook,
},
[ALC663_ASUS_MODE5] = {
@@ -17093,8 +17063,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode5_unsol_event,
+ .setup = alc663_mode5_setup,
.init_hook = alc663_mode5_inithook,
},
[ALC663_ASUS_MODE6] = {
@@ -17108,8 +17078,8 @@
.dig_out_nid = ALC662_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc662_eeepc_capture_source,
.unsol_event = alc663_mode6_unsol_event,
+ .setup = alc663_mode6_setup,
.init_hook = alc663_mode6_inithook,
},
[ALC272_DELL] = {
@@ -17123,8 +17093,8 @@
.num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
.capsrc_nids = alc272_capsrc_nids,
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
+ .setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
[ALC272_DELL_ZM1] = {
@@ -17135,11 +17105,11 @@
.dac_nids = alc662_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.adc_nids = alc662_adc_nids,
- .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .num_adc_nids = 1,
.capsrc_nids = alc662_capsrc_nids,
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc663_m51va_capture_source,
.unsol_event = alc663_m51va_unsol_event,
+ .setup = alc663_m51va_setup,
.init_hook = alc663_m51va_inithook,
},
[ALC272_SAMSUNG_NC10] = {
@@ -17150,8 +17120,9 @@
.dac_nids = alc272_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
.channel_mode = alc662_3ST_2ch_modes,
- .input_mux = &alc272_nc10_capture_source,
+ /*.input_mux = &alc272_nc10_capture_source,*/
.unsol_event = alc663_mode4_unsol_event,
+ .setup = alc663_mode4_setup,
.init_hook = alc663_mode4_inithook,
},
};
@@ -17203,13 +17174,25 @@
if (err < 0)
return err;
} else {
- sprintf(name, "%s Playback Volume", chname[i]);
+ const char *pfx;
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ if (!cfg->hp_pins)
+ pfx = "Speaker";
+ else
+ pfx = "PCM";
+ } else
+ pfx = chname[i];
+ sprintf(name, "%s Playback Volume", pfx);
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0,
HDA_OUTPUT));
if (err < 0)
return err;
- sprintf(name, "%s Playback Switch", chname[i]);
+ if (cfg->line_outs == 1 &&
+ cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+ pfx = "Speaker";
+ sprintf(name, "%s Playback Switch", pfx);
err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(alc880_idx_to_mixer(i),
3, 0, HDA_INPUT));
@@ -17271,62 +17254,9 @@
return 0;
}
-/* return the index of the src widget from the connection list of the nid.
- * return -1 if not found
- */
-static int alc662_input_pin_idx(struct hda_codec *codec, hda_nid_t nid,
- hda_nid_t src)
-{
- hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
- int i, conns;
-
- conns = snd_hda_get_connections(codec, nid, conn_list,
- ARRAY_SIZE(conn_list));
- if (conns < 0)
- return -1;
- for (i = 0; i < conns; i++)
- if (conn_list[i] == src)
- return i;
- return -1;
-}
-
-static int alc662_is_input_pin(struct hda_codec *codec, hda_nid_t nid)
-{
- unsigned int pincap = snd_hda_query_pin_caps(codec, nid);
- return (pincap & AC_PINCAP_IN) != 0;
-}
-
/* create playback/capture controls for input pins */
-static int alc662_auto_create_analog_input_ctls(struct hda_codec *codec,
- const struct auto_pin_cfg *cfg)
-{
- struct alc_spec *spec = codec->spec;
- struct hda_input_mux *imux = &spec->private_imux[0];
- int i, err, idx;
-
- for (i = 0; i < AUTO_PIN_LAST; i++) {
- if (alc662_is_input_pin(codec, cfg->input_pins[i])) {
- idx = alc662_input_pin_idx(codec, 0x0b,
- cfg->input_pins[i]);
- if (idx >= 0) {
- err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i],
- idx, 0x0b);
- if (err < 0)
- return err;
- }
- idx = alc662_input_pin_idx(codec, 0x22,
- cfg->input_pins[i]);
- if (idx >= 0) {
- imux->items[imux->num_items].label =
- auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = idx;
- imux->num_items++;
- }
- }
- }
- return 0;
-}
+#define alc662_auto_create_input_ctls \
+ alc880_auto_create_input_ctls
static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
@@ -17380,7 +17310,7 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if (alc662_is_input_pin(codec, nid)) {
+ if (alc_is_input_pin(codec, nid)) {
alc_set_input_pin(codec, nid, i);
if (nid != ALC662_PIN_CD_NID &&
(get_wcaps(codec, nid) & AC_WCAP_OUT_AMP))
@@ -17421,7 +17351,7 @@
"Headphone");
if (err < 0)
return err;
- err = alc662_auto_create_analog_input_ctls(codec, &spec->autocfg);
+ err = alc662_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -17478,8 +17408,8 @@
alc662_models,
alc662_cfg_tbl);
if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for %s, "
- "trying auto-probe from BIOS...\n", codec->chip_name);
+ printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
board_config = ALC662_AUTO;
}
@@ -17504,7 +17434,7 @@
}
if (board_config != ALC662_AUTO)
- setup_preset(spec, &alc662_presets[board_config]);
+ setup_preset(codec, &alc662_presets[board_config]);
spec->stream_analog_playback = &alc662_pcm_analog_playback;
spec->stream_analog_capture = &alc662_pcm_analog_capture;
@@ -17520,7 +17450,7 @@
spec->capsrc_nids = alc662_capsrc_nids;
if (!spec->cap_mixer)
- set_capture_mixer(spec);
+ set_capture_mixer(codec);
if (codec->vendor_id == 0x10ec0662)
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
else
@@ -17556,23 +17486,23 @@
{ .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
{ .id = 0x10ec0862, .name = "ALC861-VD", .patch = patch_alc861vd },
{ .id = 0x10ec0662, .rev = 0x100002, .name = "ALC662 rev2",
- .patch = patch_alc883 },
+ .patch = patch_alc882 },
{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
.patch = patch_alc662 },
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
- { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 },
+ { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
{ .id = 0x10ec0885, .rev = 0x100101, .name = "ALC889A",
- .patch = patch_alc882 }, /* should be patch_alc883() in future */
+ .patch = patch_alc882 },
{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
- .patch = patch_alc882 }, /* should be patch_alc883() in future */
+ .patch = patch_alc882 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
- { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 },
+ { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
- .patch = patch_alc883 },
- { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
- { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 },
+ .patch = patch_alc882 },
+ { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc882 },
+ { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6990cfc..e31e53d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -40,6 +40,8 @@
STAC_INSERT_EVENT,
STAC_PWR_EVENT,
STAC_HP_EVENT,
+ STAC_LO_EVENT,
+ STAC_MIC_EVENT,
};
enum {
@@ -81,6 +83,7 @@
STAC_DELL_M6_DMIC,
STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
+ STAC_ALIENWARE_M17X,
STAC_92HD73XX_MODELS
};
@@ -177,6 +180,12 @@
struct snd_jack *jack;
};
+struct sigmatel_mic_route {
+ hda_nid_t pin;
+ unsigned char mux_idx;
+ unsigned char dmux_idx;
+};
+
struct sigmatel_spec {
struct snd_kcontrol_new *mixers[4];
unsigned int num_mixers;
@@ -188,6 +197,7 @@
unsigned int hp_detect: 1;
unsigned int spdif_mute: 1;
unsigned int check_volume_offset:1;
+ unsigned int auto_mic:1;
/* gpio lines */
unsigned int eapd_mask;
@@ -219,7 +229,6 @@
/* playback */
struct hda_input_mux *mono_mux;
- struct hda_input_mux *amp_mux;
unsigned int cur_mmux;
struct hda_multi_out multiout;
hda_nid_t dac_nids[5];
@@ -239,6 +248,15 @@
unsigned int num_dmuxes;
hda_nid_t *smux_nids;
unsigned int num_smuxes;
+ unsigned int num_analog_muxes;
+
+ unsigned long *capvols; /* amp-volume attr: HDA_COMPOSE_AMP_VAL() */
+ unsigned long *capsws; /* amp-mute attr: HDA_COMPOSE_AMP_VAL() */
+ unsigned int num_caps; /* number of capture volume/switch elements */
+
+ struct sigmatel_mic_route ext_mic;
+ struct sigmatel_mic_route int_mic;
+
const char **spdif_labels;
hda_nid_t dig_in_nid;
@@ -263,7 +281,6 @@
unsigned int cur_smux[2];
unsigned int cur_amux;
hda_nid_t *amp_nids;
- unsigned int num_amps;
unsigned int powerdown_adcs;
/* i/o switches */
@@ -282,7 +299,6 @@
struct hda_input_mux private_dimux;
struct hda_input_mux private_imux;
struct hda_input_mux private_smux;
- struct hda_input_mux private_amp_mux;
struct hda_input_mux private_mono_mux;
};
@@ -311,11 +327,6 @@
0x1a, 0x1b
};
-#define DELL_M6_AMP 2
-static hda_nid_t stac92hd73xx_amp_nids[3] = {
- 0x0b, 0x0c, 0x0e
-};
-
#define STAC92HD73XX_NUM_DMICS 2
static hda_nid_t stac92hd73xx_dmic_nids[STAC92HD73XX_NUM_DMICS + 1] = {
0x13, 0x14, 0
@@ -323,8 +334,8 @@
#define STAC92HD73_DAC_COUNT 5
-static hda_nid_t stac92hd73xx_mux_nids[4] = {
- 0x28, 0x29, 0x2a, 0x2b,
+static hda_nid_t stac92hd73xx_mux_nids[2] = {
+ 0x20, 0x21,
};
static hda_nid_t stac92hd73xx_dmux_nids[2] = {
@@ -335,14 +346,16 @@
0x22, 0x23,
};
-#define STAC92HD83XXX_NUM_DMICS 2
-static hda_nid_t stac92hd83xxx_dmic_nids[STAC92HD83XXX_NUM_DMICS + 1] = {
- 0x11, 0x12, 0
+#define STAC92HD73XX_NUM_CAPS 2
+static unsigned long stac92hd73xx_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x20, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
};
+#define stac92hd73xx_capsws stac92hd73xx_capvols
#define STAC92HD83_DAC_COUNT 3
-static hda_nid_t stac92hd83xxx_dmux_nids[2] = {
+static hda_nid_t stac92hd83xxx_mux_nids[2] = {
0x17, 0x18,
};
@@ -362,9 +375,12 @@
0x03, 0x0c, 0x20, 0x40,
};
-static hda_nid_t stac92hd83xxx_amp_nids[1] = {
- 0xc,
+#define STAC92HD83XXX_NUM_CAPS 2
+static unsigned long stac92hd83xxx_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x18, 3, 0, HDA_OUTPUT),
};
+#define stac92hd83xxx_capsws stac92hd83xxx_capvols
static hda_nid_t stac92hd71bxx_pwr_nids[3] = {
0x0a, 0x0d, 0x0f
@@ -395,6 +411,13 @@
0x22, 0
};
+#define STAC92HD71BXX_NUM_CAPS 2
+static unsigned long stac92hd71bxx_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x1c, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1d, 3, 0, HDA_OUTPUT),
+};
+#define stac92hd71bxx_capsws stac92hd71bxx_capvols
+
static hda_nid_t stac925x_adc_nids[1] = {
0x03,
};
@@ -416,6 +439,13 @@
0x14,
};
+static unsigned long stac925x_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_OUTPUT),
+};
+static unsigned long stac925x_capsws[] = {
+ HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
+};
+
static hda_nid_t stac922x_adc_nids[2] = {
0x06, 0x07,
};
@@ -424,6 +454,13 @@
0x12, 0x13,
};
+#define STAC922X_NUM_CAPS 2
+static unsigned long stac922x_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x18, 3, 0, HDA_INPUT),
+};
+#define stac922x_capsws stac922x_capvols
+
static hda_nid_t stac927x_slave_dig_outs[2] = {
0x1f, 0,
};
@@ -453,6 +490,18 @@
0x13, 0x14, 0
};
+#define STAC927X_NUM_CAPS 3
+static unsigned long stac927x_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x18, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x19, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_INPUT),
+};
+static unsigned long stac927x_capsws[] = {
+ HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1c, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1d, 3, 0, HDA_OUTPUT),
+};
+
static const char *stac927x_spdif_labels[5] = {
"Digital Playback", "ADAT", "Analog Mux 1",
"Analog Mux 2", "Analog Mux 3"
@@ -479,6 +528,16 @@
0x17, 0x18, 0
};
+#define STAC9205_NUM_CAPS 2
+static unsigned long stac9205_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x1b, 3, 0, HDA_INPUT),
+ HDA_COMPOSE_AMP_VAL(0x1c, 3, 0, HDA_INPUT),
+};
+static unsigned long stac9205_capsws[] = {
+ HDA_COMPOSE_AMP_VAL(0x1d, 3, 0, HDA_OUTPUT),
+ HDA_COMPOSE_AMP_VAL(0x1e, 3, 0, HDA_OUTPUT),
+};
+
static hda_nid_t stac9200_pin_nids[8] = {
0x08, 0x09, 0x0d, 0x0e,
0x0f, 0x10, 0x11, 0x12,
@@ -529,34 +588,6 @@
0x21, 0x22,
};
-#define stac92xx_amp_volume_info snd_hda_mixer_amp_volume_info
-
-static int stac92xx_amp_volume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->amp_nids[spec->cur_amux];
-
- kcontrol->private_value ^= get_amp_nid(kcontrol);
- kcontrol->private_value |= nid;
-
- return snd_hda_mixer_amp_volume_get(kcontrol, ucontrol);
-}
-
-static int stac92xx_amp_volume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->amp_nids[spec->cur_amux];
-
- kcontrol->private_value ^= get_amp_nid(kcontrol);
- kcontrol->private_value |= nid;
-
- return snd_hda_mixer_amp_volume_put(kcontrol, ucontrol);
-}
-
static int stac92xx_dmux_enum_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
@@ -693,9 +724,35 @@
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct sigmatel_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int idx, prev_idx;
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- spec->mux_nids[adc_idx], &spec->cur_mux[adc_idx]);
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ prev_idx = spec->cur_mux[adc_idx];
+ if (prev_idx == idx)
+ return 0;
+ if (idx < spec->num_analog_muxes) {
+ snd_hda_codec_write_cache(codec, spec->mux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[idx].index);
+ if (prev_idx >= spec->num_analog_muxes) {
+ imux = spec->dinput_mux;
+ /* 0 = analog */
+ snd_hda_codec_write_cache(codec,
+ spec->dmux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[0].index);
+ }
+ } else {
+ imux = spec->dinput_mux;
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[idx - 1].index);
+ }
+ spec->cur_mux[adc_idx] = idx;
+ return 1;
}
static int stac92xx_mono_mux_enum_info(struct snd_kcontrol *kcontrol,
@@ -726,41 +783,6 @@
spec->mono_nid, &spec->cur_mmux);
}
-static int stac92xx_amp_mux_enum_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- return snd_hda_input_mux_info(spec->amp_mux, uinfo);
-}
-
-static int stac92xx_amp_mux_enum_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
-
- ucontrol->value.enumerated.item[0] = spec->cur_amux;
- return 0;
-}
-
-static int stac92xx_amp_mux_enum_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct sigmatel_spec *spec = codec->spec;
- struct snd_kcontrol *ctl =
- snd_hda_find_mixer_ctl(codec, "Amp Capture Volume");
- if (!ctl)
- return -EINVAL;
-
- snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE |
- SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
-
- return snd_hda_input_mux_put(codec, spec->amp_mux, ucontrol,
- 0, &spec->cur_amux);
-}
-
#define stac92xx_aloopback_info snd_ctl_boolean_mono_info
static int stac92xx_aloopback_get(struct snd_kcontrol *kcontrol,
@@ -828,84 +850,16 @@
{}
};
-static struct hda_verb stac92hd73xx_6ch_core_init[] = {
- /* set master volume and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {}
-};
-
static struct hda_verb dell_eq_core_init[] = {
/* set master volume to max value without distortion
* and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00},
{}
};
-static struct hda_verb dell_m6_core_init[] = {
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x00},
- {}
-};
-
-static struct hda_verb stac92hd73xx_8ch_core_init[] = {
+static struct hda_verb stac92hd73xx_core_init[] = {
/* set master volume and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x03},
- {}
-};
-
-static struct hda_verb stac92hd73xx_10ch_core_init[] = {
- /* set master volume and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* dac3 is connected to import3 mux */
- { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb07f},
- /* setup adcs to point to mixer */
- { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* setup import muxs */
- { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x2b, AC_VERB_SET_CONNECT_SEL, 0x03},
{}
};
@@ -925,19 +879,6 @@
{}
};
-#define HD_DISABLE_PORTF 1
-static struct hda_verb stac92hd71bxx_analog_core_init[] = {
- /* start of config #1 */
-
- /* connect port 0f to audio mixer */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2},
- /* start of config #2 */
-
- /* set master volume and direct control */
- { 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- {}
-};
-
static struct hda_verb stac92hd71bxx_unmute_core_init[] = {
/* unmute right and left channels for nodes 0x0f, 0xa, 0x0d */
{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -996,31 +937,6 @@
.put = stac92xx_mono_mux_enum_put, \
}
-#define STAC_AMP_MUX \
- { \
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = "Amp Selector Capture Switch", \
- .count = 1, \
- .info = stac92xx_amp_mux_enum_info, \
- .get = stac92xx_amp_mux_enum_get, \
- .put = stac92xx_amp_mux_enum_put, \
- }
-
-#define STAC_AMP_VOL(xname, nid, chs, idx, dir) \
- { \
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = 0, \
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
- SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
- SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
- .info = stac92xx_amp_volume_info, \
- .get = stac92xx_amp_volume_get, \
- .put = stac92xx_amp_volume_put, \
- .tlv = { .c = snd_hda_mixer_amp_tlv }, \
- .private_value = HDA_COMPOSE_AMP_VAL(nid, chs, idx, dir) \
- }
-
#define STAC_ANALOG_LOOPBACK(verb_read, verb_write, cnt) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
@@ -1051,34 +967,6 @@
{ } /* end */
};
-#define DELL_M6_MIXER 6
-static struct snd_kcontrol_new stac92hd73xx_6ch_mixer[] = {
- /* start of config #1 */
- HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT),
-
- /* start of config #2 */
- HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT),
-
- { } /* end */
-};
-
static struct snd_kcontrol_new stac92hd73xx_6ch_loopback[] = {
STAC_ANALOG_LOOPBACK(0xFA0, 0x7A1, 3),
{}
@@ -1094,134 +982,14 @@
{}
};
-static struct snd_kcontrol_new stac92hd73xx_8ch_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT),
- { } /* end */
-};
-
-static struct snd_kcontrol_new stac92hd73xx_10ch_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x20, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x20, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x21, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("Front Mic Mixer Capture Volume", 0x1d, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Mixer Capture Switch", 0x1d, 0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Mic Mixer Capture Volume", 0x1d, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Mixer Capture Switch", 0x1d, 0x1, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Mixer Capture Volume", 0x1d, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Mixer Capture Switch", 0x1d, 0x2, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC Mixer Capture Volume", 0x1d, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC Mixer Capture Switch", 0x1d, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("CD Mixer Capture Volume", 0x1d, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Mixer Capture Switch", 0x1d, 0x4, HDA_INPUT),
- { } /* end */
-};
-
-
-static struct snd_kcontrol_new stac92hd83xxx_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x1b, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("DAC0 Capture Switch", 0x1b, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x1b, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("DAC1 Capture Switch", 0x1b, 0x4, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Front Mic Capture Volume", 0x1b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Capture Switch", 0x1b, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Capture Volume", 0x1b, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Capture Switch", 0x1b, 0x2, HDA_INPUT),
-
- /*
- HDA_CODEC_VOLUME("Mic Capture Volume", 0x1b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Capture Switch", 0x1b 0x1, HDA_INPUT),
- */
- { } /* end */
-};
-
-static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- /* analog pc-beep replaced with digital beep support */
- /*
- HDA_CODEC_VOLUME("PC Beep Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("PC Beep Switch", 0x17, 0x2, HDA_INPUT),
- */
-
- HDA_CODEC_MUTE("Import0 Mux Capture Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Import0 Mux Capture Volume", 0x17, 0x0, HDA_INPUT),
-
- HDA_CODEC_MUTE("Import1 Mux Capture Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Import1 Mux Capture Volume", 0x17, 0x1, HDA_INPUT),
-
- HDA_CODEC_MUTE("DAC0 Capture Switch", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x17, 0x3, HDA_INPUT),
-
- HDA_CODEC_MUTE("DAC1 Capture Switch", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x17, 0x4, HDA_INPUT),
- { } /* end */
-};
static struct snd_kcontrol_new stac92hd71bxx_loopback[] = {
STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2)
};
-static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
static struct snd_kcontrol_new stac925x_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
- { } /* end */
-};
-
-static struct snd_kcontrol_new stac9205_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1d, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1c, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1e, 0x0, HDA_OUTPUT),
{ } /* end */
};
@@ -1230,29 +998,6 @@
{}
};
-/* This needs to be generated dynamically based on sequence */
-static struct snd_kcontrol_new stac922x_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_INPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_INPUT),
- { } /* end */
-};
-
-
-static struct snd_kcontrol_new stac927x_mixer[] = {
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1b, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x19, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1c, 0x0, HDA_OUTPUT),
-
- HDA_CODEC_VOLUME_IDX("Capture Volume", 0x2, 0x1A, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 0x2, 0x1d, 0x0, HDA_OUTPUT),
- { } /* end */
-};
-
static struct snd_kcontrol_new stac927x_loopback[] = {
STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1),
{}
@@ -1310,16 +1055,19 @@
int err;
int i;
- err = snd_hda_add_new_ctls(codec, spec->mixer);
- if (err < 0)
- return err;
+ if (spec->mixer) {
+ err = snd_hda_add_new_ctls(codec, spec->mixer);
+ if (err < 0)
+ return err;
+ }
for (i = 0; i < spec->num_mixers; i++) {
err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
if (err < 0)
return err;
}
- if (spec->num_dmuxes > 0) {
+ if (!spec->auto_mic && spec->num_dmuxes > 0 &&
+ snd_hda_get_bool_hint(codec, "separate_dmux") == 1) {
stac_dmux_mixer.count = spec->num_dmuxes;
err = snd_hda_ctl_add(codec,
snd_ctl_new1(&stac_dmux_mixer, codec));
@@ -1766,12 +1514,20 @@
0x4f0000f0,
};
+static unsigned int alienware_m17x_pin_configs[13] = {
+ 0x0321101f, 0x0321101f, 0x03a11020, 0x03014020,
+ 0x90170110, 0x4f0000f0, 0x4f0000f0, 0x4f0000f0,
+ 0x4f0000f0, 0x90a60160, 0x4f0000f0, 0x4f0000f0,
+ 0x904601b0,
+};
+
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
[STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
[STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
[STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
+ [STAC_ALIENWARE_M17X] = alienware_m17x_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
@@ -1783,6 +1539,7 @@
[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
[STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
+ [STAC_ALIENWARE_M17X] = "alienware",
};
static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
@@ -1820,6 +1577,12 @@
{} /* terminator */
};
+static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
+ {} /* terminator */
+};
+
static unsigned int ref92hd83xxx_pin_configs[10] = {
0x02214030, 0x02211010, 0x02a19020, 0x02170130,
0x01014050, 0x01819040, 0x01014020, 0x90a3014e,
@@ -1927,6 +1690,8 @@
"HP mini 1000", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361b,
"HP HDX", STAC_HP_HDX), /* HDX16 */
+ SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
+ "HP", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
"unknown Dell", STAC_DELL_M4_1),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0234,
@@ -2642,8 +2407,7 @@
return 0;
}
-static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid,
- unsigned char type);
+static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid);
static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -2657,7 +2421,7 @@
/* check to be sure that the ports are upto date with
* switch changes
*/
- stac_issue_unsol_event(codec, nid, STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, nid);
return 1;
}
@@ -2790,7 +2554,7 @@
* appropriately according to the pin direction
*/
if (spec->hp_detect)
- stac_issue_unsol_event(codec, nid, STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, nid);
return 1;
}
@@ -2859,8 +2623,6 @@
STAC_CTL_WIDGET_VOL,
STAC_CTL_WIDGET_MUTE,
STAC_CTL_WIDGET_MONO_MUX,
- STAC_CTL_WIDGET_AMP_MUX,
- STAC_CTL_WIDGET_AMP_VOL,
STAC_CTL_WIDGET_HP_SWITCH,
STAC_CTL_WIDGET_IO_SWITCH,
STAC_CTL_WIDGET_CLFE_SWITCH,
@@ -2871,8 +2633,6 @@
HDA_CODEC_VOLUME(NULL, 0, 0, 0),
HDA_CODEC_MUTE(NULL, 0, 0, 0),
STAC_MONO_MUX,
- STAC_AMP_MUX,
- STAC_AMP_VOL(NULL, 0, 0, 0, 0),
STAC_CODEC_HP_SWITCH(NULL),
STAC_CODEC_IO_SWITCH(NULL, 0),
STAC_CODEC_CLFE_SWITCH(NULL, 0),
@@ -2973,6 +2733,8 @@
struct snd_kcontrol_new *knew;
struct hda_input_mux *imux = &spec->private_imux;
+ if (spec->auto_mic)
+ return 0; /* no need for input source */
if (!spec->num_adcs || imux->num_items <= 1)
return 0; /* no need for input source control */
knew = stac_control_new(spec, &stac_input_src_temp,
@@ -3066,7 +2828,7 @@
HDA_MAX_CONNECTIONS);
for (j = 0; j < conn_len; j++) {
wcaps = get_wcaps(codec, conn[j]);
- wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ wtype = get_wcaps_type(wcaps);
/* we check only analog outputs */
if (wtype != AC_WID_AUD_OUT || (wcaps & AC_WCAP_DIGITAL))
continue;
@@ -3325,6 +3087,21 @@
return 0;
}
+static int stac92xx_add_capvol_ctls(struct hda_codec *codec, unsigned long vol,
+ unsigned long sw, int idx)
+{
+ int err;
+ err = stac92xx_add_control_idx(codec->spec, STAC_CTL_WIDGET_VOL, idx,
+ "Capture Volume", vol);
+ if (err < 0)
+ return err;
+ err = stac92xx_add_control_idx(codec->spec, STAC_CTL_WIDGET_MUTE, idx,
+ "Capture Switch", sw);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
/* add playback controls from the parsed DAC table */
static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
@@ -3398,7 +3175,7 @@
spec->mono_nid,
con_lst,
HDA_MAX_NUM_INPUTS);
- if (!num_cons || num_cons > ARRAY_SIZE(stac92xx_mono_labels))
+ if (num_cons <= 0 || num_cons > ARRAY_SIZE(stac92xx_mono_labels))
return -EINVAL;
for (i = 0; i < num_cons; i++) {
@@ -3412,37 +3189,6 @@
"Mono Mux", spec->mono_nid);
}
-/* labels for amp mux outputs */
-static const char *stac92xx_amp_labels[3] = {
- "Front Microphone", "Microphone", "Line In",
-};
-
-/* create amp out controls mux on capable codecs */
-static int stac92xx_auto_create_amp_output_ctls(struct hda_codec *codec)
-{
- struct sigmatel_spec *spec = codec->spec;
- struct hda_input_mux *amp_mux = &spec->private_amp_mux;
- int i, err;
-
- for (i = 0; i < spec->num_amps; i++) {
- amp_mux->items[amp_mux->num_items].label =
- stac92xx_amp_labels[i];
- amp_mux->items[amp_mux->num_items].index = i;
- amp_mux->num_items++;
- }
-
- if (spec->num_amps > 1) {
- err = stac92xx_add_control(spec, STAC_CTL_WIDGET_AMP_MUX,
- "Amp Selector Capture Switch", 0);
- if (err < 0)
- return err;
- }
- return stac92xx_add_control(spec, STAC_CTL_WIDGET_AMP_VOL,
- "Amp Capture Volume",
- HDA_COMPOSE_AMP_VAL(spec->amp_nids[0], 3, 0, HDA_INPUT));
-}
-
-
/* create PC beep volume controls */
static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec,
hda_nid_t nid)
@@ -3511,19 +3257,33 @@
static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- int wcaps, nid, i, err = 0;
+ int i, j, err = 0;
for (i = 0; i < spec->num_muxes; i++) {
+ hda_nid_t nid;
+ unsigned int wcaps;
+ unsigned long val;
+
nid = spec->mux_nids[i];
wcaps = get_wcaps(codec, nid);
+ if (!(wcaps & AC_WCAP_OUT_AMP))
+ continue;
- if (wcaps & AC_WCAP_OUT_AMP) {
- err = stac92xx_add_control_idx(spec,
- STAC_CTL_WIDGET_VOL, i, "Mux Capture Volume",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
+ /* check whether already the same control was created as
+ * normal Capture Volume.
+ */
+ val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ for (j = 0; j < spec->num_caps; j++) {
+ if (spec->capvols[j] == val)
+ break;
}
+ if (j < spec->num_caps)
+ continue;
+
+ err = stac92xx_add_control_idx(spec, STAC_CTL_WIDGET_VOL, i,
+ "Mux Capture Volume", val);
+ if (err < 0)
+ return err;
}
return 0;
};
@@ -3544,7 +3304,7 @@
spec->smux_nids[0],
con_lst,
HDA_MAX_NUM_INPUTS);
- if (!num_cons)
+ if (num_cons <= 0)
return -EINVAL;
if (!labels)
@@ -3565,101 +3325,231 @@
"Digital Mic 3", "Digital Mic 4"
};
+static int get_connection_index(struct hda_codec *codec, hda_nid_t mux,
+ hda_nid_t nid)
+{
+ hda_nid_t conn[HDA_MAX_NUM_INPUTS];
+ int i, nums;
+
+ nums = snd_hda_get_connections(codec, mux, conn, ARRAY_SIZE(conn));
+ for (i = 0; i < nums; i++)
+ if (conn[i] == nid)
+ return i;
+ return -1;
+}
+
+/* create a volume assigned to the given pin (only if supported) */
+/* return 1 if the volume control is created */
+static int create_elem_capture_vol(struct hda_codec *codec, hda_nid_t nid,
+ const char *label, int direction)
+{
+ unsigned int caps, nums;
+ char name[32];
+ int err;
+
+ if (direction == HDA_OUTPUT)
+ caps = AC_WCAP_OUT_AMP;
+ else
+ caps = AC_WCAP_IN_AMP;
+ if (!(get_wcaps(codec, nid) & caps))
+ return 0;
+ caps = query_amp_caps(codec, nid, direction);
+ nums = (caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT;
+ if (!nums)
+ return 0;
+ snprintf(name, sizeof(name), "%s Capture Volume", label);
+ err = stac92xx_add_control(codec->spec, STAC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, direction));
+ if (err < 0)
+ return err;
+ return 1;
+}
+
/* create playback/capture controls for input pins on dmic capable codecs */
static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
struct sigmatel_spec *spec = codec->spec;
+ struct hda_input_mux *imux = &spec->private_imux;
struct hda_input_mux *dimux = &spec->private_dimux;
- hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
- int err, i, j;
- char name[32];
+ int err, i, active_mics;
+ unsigned int def_conf;
dimux->items[dimux->num_items].label = stac92xx_dmic_labels[0];
dimux->items[dimux->num_items].index = 0;
dimux->num_items++;
+ active_mics = 0;
+ for (i = 0; i < spec->num_dmics; i++) {
+ /* check the validity: sometimes it's a dead vendor-spec node */
+ if (get_wcaps_type(get_wcaps(codec, spec->dmic_nids[i]))
+ != AC_WID_PIN)
+ continue;
+ def_conf = snd_hda_codec_get_pincfg(codec, spec->dmic_nids[i]);
+ if (get_defcfg_connect(def_conf) != AC_JACK_PORT_NONE)
+ active_mics++;
+ }
+
for (i = 0; i < spec->num_dmics; i++) {
hda_nid_t nid;
int index;
- int num_cons;
- unsigned int wcaps;
- unsigned int def_conf;
+ const char *label;
- def_conf = snd_hda_codec_get_pincfg(codec, spec->dmic_nids[i]);
+ nid = spec->dmic_nids[i];
+ if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+ continue;
+ def_conf = snd_hda_codec_get_pincfg(codec, nid);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
- nid = spec->dmic_nids[i];
- num_cons = snd_hda_get_connections(codec,
- spec->dmux_nids[0],
- con_lst,
- HDA_MAX_NUM_INPUTS);
- for (j = 0; j < num_cons; j++)
- if (con_lst[j] == nid) {
- index = j;
- goto found;
- }
- continue;
-found:
- wcaps = get_wcaps(codec, nid) &
- (AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
+ index = get_connection_index(codec, spec->dmux_nids[0], nid);
+ if (index < 0)
+ continue;
- if (wcaps) {
- sprintf(name, "%s Capture Volume",
- stac92xx_dmic_labels[dimux->num_items]);
+ if (active_mics == 1)
+ label = "Digital Mic";
+ else
+ label = stac92xx_dmic_labels[dimux->num_items];
- err = stac92xx_add_control(spec,
- STAC_CTL_WIDGET_VOL,
- name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- (wcaps & AC_WCAP_OUT_AMP) ?
- HDA_OUTPUT : HDA_INPUT));
+ err = create_elem_capture_vol(codec, nid, label, HDA_INPUT);
+ if (err < 0)
+ return err;
+ if (!err) {
+ err = create_elem_capture_vol(codec, nid, label,
+ HDA_OUTPUT);
if (err < 0)
return err;
}
- dimux->items[dimux->num_items].label =
- stac92xx_dmic_labels[dimux->num_items];
+ dimux->items[dimux->num_items].label = label;
dimux->items[dimux->num_items].index = index;
dimux->num_items++;
+ if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) {
+ imux->items[imux->num_items].label = label;
+ imux->items[imux->num_items].index = index;
+ imux->num_items++;
+ }
}
return 0;
}
+static int check_mic_pin(struct hda_codec *codec, hda_nid_t nid,
+ hda_nid_t *fixed, hda_nid_t *ext)
+{
+ unsigned int cfg;
+
+ if (!nid)
+ return 0;
+ cfg = snd_hda_codec_get_pincfg(codec, nid);
+ switch (get_defcfg_connect(cfg)) {
+ case AC_JACK_PORT_FIXED:
+ if (*fixed)
+ return 1; /* already occupied */
+ *fixed = nid;
+ break;
+ case AC_JACK_PORT_COMPLEX:
+ if (*ext)
+ return 1; /* already occupied */
+ *ext = nid;
+ break;
+ }
+ return 0;
+}
+
+static int set_mic_route(struct hda_codec *codec,
+ struct sigmatel_mic_route *mic,
+ hda_nid_t pin)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ mic->pin = pin;
+ for (i = AUTO_PIN_MIC; i <= AUTO_PIN_FRONT_MIC; i++)
+ if (pin == cfg->input_pins[i])
+ break;
+ if (i <= AUTO_PIN_FRONT_MIC) {
+ /* analog pin */
+ mic->dmux_idx = 0;
+ i = get_connection_index(codec, spec->mux_nids[0], pin);
+ if (i < 0)
+ return -1;
+ mic->mux_idx = i;
+ } else if (spec->dmux_nids) {
+ /* digital pin */
+ mic->mux_idx = 0;
+ i = get_connection_index(codec, spec->dmux_nids[0], pin);
+ if (i < 0)
+ return -1;
+ mic->dmux_idx = i;
+ }
+ return 0;
+}
+
+/* return non-zero if the device is for automatic mic switch */
+static int stac_check_auto_mic(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t fixed, ext;
+ int i;
+
+ for (i = AUTO_PIN_LINE; i < AUTO_PIN_LAST; i++) {
+ if (cfg->input_pins[i])
+ return 0; /* must be exclusively mics */
+ }
+ fixed = ext = 0;
+ for (i = AUTO_PIN_MIC; i <= AUTO_PIN_FRONT_MIC; i++)
+ if (check_mic_pin(codec, cfg->input_pins[i], &fixed, &ext))
+ return 0;
+ for (i = 0; i < spec->num_dmics; i++)
+ if (check_mic_pin(codec, spec->dmic_nids[i], &fixed, &ext))
+ return 0;
+ if (!fixed || !ext)
+ return 0;
+ if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
+ return 0; /* no unsol support */
+ if (set_mic_route(codec, &spec->ext_mic, ext) ||
+ set_mic_route(codec, &spec->int_mic, fixed))
+ return 0; /* something is wrong */
+ return 1;
+}
+
/* create playback/capture controls for input pins */
static int stac92xx_auto_create_analog_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
{
struct sigmatel_spec *spec = codec->spec;
struct hda_input_mux *imux = &spec->private_imux;
- hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
- int i, j, k;
+ int i, j;
for (i = 0; i < AUTO_PIN_LAST; i++) {
- int index;
+ hda_nid_t nid = cfg->input_pins[i];
+ int index, err;
- if (!cfg->input_pins[i])
+ if (!nid)
continue;
index = -1;
for (j = 0; j < spec->num_muxes; j++) {
- int num_cons;
- num_cons = snd_hda_get_connections(codec,
- spec->mux_nids[j],
- con_lst,
- HDA_MAX_NUM_INPUTS);
- for (k = 0; k < num_cons; k++)
- if (con_lst[k] == cfg->input_pins[i]) {
- index = k;
- goto found;
- }
+ index = get_connection_index(codec, spec->mux_nids[j],
+ nid);
+ if (index >= 0)
+ break;
}
- continue;
- found:
+ if (index < 0)
+ continue;
+
+ err = create_elem_capture_vol(codec, nid,
+ auto_pin_cfg_labels[i],
+ HDA_INPUT);
+ if (err < 0)
+ return err;
+
imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = index;
imux->num_items++;
}
+ spec->num_analog_muxes = imux->num_items;
if (imux->num_items) {
/*
@@ -3711,7 +3601,7 @@
{
struct sigmatel_spec *spec = codec->spec;
int hp_swap = 0;
- int err;
+ int i, err;
if ((err = snd_hda_parse_pin_def_config(codec,
&spec->autocfg,
@@ -3751,11 +3641,10 @@
if (snd_hda_get_connections(codec,
spec->autocfg.mono_out_pin, conn_list, 1) &&
snd_hda_get_connections(codec, conn_list[0],
- conn_list, 1)) {
+ conn_list, 1) > 0) {
int wcaps = get_wcaps(codec, conn_list[0]);
- int wid_type = (wcaps & AC_WCAP_TYPE)
- >> AC_WCAP_TYPE_SHIFT;
+ int wid_type = get_wcaps_type(wcaps);
/* LR swap check, some stac925x have a mux that
* changes the DACs output path instead of the
* mono-mux path.
@@ -3846,6 +3735,21 @@
spec->autocfg.line_outs = 0;
}
+ if (stac_check_auto_mic(codec)) {
+ spec->auto_mic = 1;
+ /* only one capture for auto-mic */
+ spec->num_adcs = 1;
+ spec->num_caps = 1;
+ spec->num_muxes = 1;
+ }
+
+ for (i = 0; i < spec->num_caps; i++) {
+ err = stac92xx_add_capvol_ctls(codec, spec->capvols[i],
+ spec->capsws[i], i);
+ if (err < 0)
+ return err;
+ }
+
err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
@@ -3855,11 +3759,6 @@
if (err < 0)
return err;
}
- if (spec->num_amps > 0) {
- err = stac92xx_auto_create_amp_output_ctls(codec);
- if (err < 0)
- return err;
- }
if (spec->num_dmics > 0 && !spec->dinput_mux)
if ((err = stac92xx_auto_create_dmic_input_ctls(codec,
&spec->autocfg)) < 0)
@@ -3896,7 +3795,6 @@
spec->dinput_mux = &spec->private_dimux;
spec->sinput_mux = &spec->private_smux;
spec->mono_mux = &spec->private_mono_mux;
- spec->amp_mux = &spec->private_amp_mux;
return 1;
}
@@ -4108,14 +4006,14 @@
}
static struct sigmatel_event *stac_get_event(struct hda_codec *codec,
- hda_nid_t nid, unsigned char type)
+ hda_nid_t nid)
{
struct sigmatel_spec *spec = codec->spec;
struct sigmatel_event *event = spec->events.list;
int i;
for (i = 0; i < spec->events.used; i++, event++) {
- if (event->nid == nid && event->type == type)
+ if (event->nid == nid)
return event;
}
return NULL;
@@ -4135,24 +4033,32 @@
return NULL;
}
-static void enable_pin_detect(struct hda_codec *codec, hda_nid_t nid,
- unsigned int type)
+/* check if given nid is a valid pin and no other events are assigned
+ * to it. If OK, assign the event, set the unsol flag, and returns 1.
+ * Otherwise, returns zero.
+ */
+static int enable_pin_detect(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int type)
{
struct sigmatel_event *event;
int tag;
if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
- return;
- event = stac_get_event(codec, nid, type);
- if (event)
+ return 0;
+ event = stac_get_event(codec, nid);
+ if (event) {
+ if (event->type != type)
+ return 0;
tag = event->tag;
- else
+ } else {
tag = stac_add_event(codec->spec, nid, type, 0);
- if (tag < 0)
- return;
+ if (tag < 0)
+ return 0;
+ }
snd_hda_codec_write_cache(codec, nid, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | tag);
+ return 1;
}
static int is_nid_hp_pin(struct auto_pin_cfg *cfg, hda_nid_t nid)
@@ -4245,20 +4151,36 @@
hda_nid_t nid = cfg->hp_pins[i];
enable_pin_detect(codec, nid, STAC_HP_EVENT);
}
+ if (cfg->line_out_type == AUTO_PIN_LINE_OUT &&
+ cfg->speaker_outs > 0) {
+ /* enable pin-detect for line-outs as well */
+ for (i = 0; i < cfg->line_outs; i++) {
+ hda_nid_t nid = cfg->line_out_pins[i];
+ enable_pin_detect(codec, nid, STAC_LO_EVENT);
+ }
+ }
+
/* force to enable the first line-out; the others are set up
* in unsol_event
*/
stac92xx_auto_set_pinctl(codec, spec->autocfg.line_out_pins[0],
AC_PINCTL_OUT_EN);
/* fake event to set up pins */
- stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0],
- STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
} else {
stac92xx_auto_init_multi_out(codec);
stac92xx_auto_init_hp_out(codec);
for (i = 0; i < cfg->hp_outs; i++)
stac_toggle_power_map(codec, cfg->hp_pins[i], 1);
}
+ if (spec->auto_mic) {
+ /* initialize connection to analog input */
+ if (spec->dmux_nids)
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
+ AC_VERB_SET_CONNECT_SEL, 0);
+ if (enable_pin_detect(codec, spec->ext_mic.pin, STAC_MIC_EVENT))
+ stac_issue_unsol_event(codec, spec->ext_mic.pin);
+ }
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = cfg->input_pins[i];
if (nid) {
@@ -4285,10 +4207,9 @@
}
conf = snd_hda_codec_get_pincfg(codec, nid);
if (get_defcfg_connect(conf) != AC_JACK_PORT_FIXED) {
- enable_pin_detect(codec, nid,
- STAC_INSERT_EVENT);
- stac_issue_unsol_event(codec, nid,
- STAC_INSERT_EVENT);
+ if (enable_pin_detect(codec, nid,
+ STAC_INSERT_EVENT))
+ stac_issue_unsol_event(codec, nid);
}
}
}
@@ -4333,10 +4254,8 @@
stac_toggle_power_map(codec, nid, 1);
continue;
}
- if (!stac_get_event(codec, nid, STAC_INSERT_EVENT)) {
- enable_pin_detect(codec, nid, STAC_PWR_EVENT);
- stac_issue_unsol_event(codec, nid, STAC_PWR_EVENT);
- }
+ if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+ stac_issue_unsol_event(codec, nid);
}
if (spec->dac_list)
stac92xx_power_down(codec);
@@ -4440,6 +4359,48 @@
return 0;
}
+static void stac92xx_line_out_detect(struct hda_codec *codec,
+ int presence)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (presence)
+ break;
+ presence = get_pin_presence(codec, cfg->line_out_pins[i]);
+ if (presence) {
+ unsigned int pinctl;
+ pinctl = snd_hda_codec_read(codec,
+ cfg->line_out_pins[i], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ if (pinctl & AC_PINCTL_IN_EN)
+ presence = 0; /* mic- or line-input */
+ }
+ }
+
+ if (presence) {
+ /* disable speakers */
+ for (i = 0; i < cfg->speaker_outs; i++)
+ stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
+ AC_PINCTL_OUT_EN);
+ if (spec->eapd_mask && spec->eapd_switch)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
+ } else {
+ /* enable speakers */
+ for (i = 0; i < cfg->speaker_outs; i++)
+ stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
+ AC_PINCTL_OUT_EN);
+ if (spec->eapd_mask && spec->eapd_switch)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data |
+ spec->eapd_mask);
+ }
+}
+
/* return non-zero if the hp-pin of the given array index isn't
* a jack-detection target
*/
@@ -4492,13 +4453,6 @@
for (i = 0; i < cfg->line_outs; i++)
stac92xx_reset_pinctl(codec, cfg->line_out_pins[i],
AC_PINCTL_OUT_EN);
- for (i = 0; i < cfg->speaker_outs; i++)
- stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
- AC_PINCTL_OUT_EN);
- if (spec->eapd_mask && spec->eapd_switch)
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data &
- ~spec->eapd_mask);
} else {
/* enable lineouts */
if (spec->hp_switch)
@@ -4507,14 +4461,8 @@
for (i = 0; i < cfg->line_outs; i++)
stac92xx_set_pinctl(codec, cfg->line_out_pins[i],
AC_PINCTL_OUT_EN);
- for (i = 0; i < cfg->speaker_outs; i++)
- stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
- AC_PINCTL_OUT_EN);
- if (spec->eapd_mask && spec->eapd_switch)
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data |
- spec->eapd_mask);
}
+ stac92xx_line_out_detect(codec, presence);
/* toggle hp outs */
for (i = 0; i < cfg->hp_outs; i++) {
unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN;
@@ -4599,10 +4547,28 @@
}
}
-static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid,
- unsigned char type)
+static void stac92xx_mic_detect(struct hda_codec *codec)
{
- struct sigmatel_event *event = stac_get_event(codec, nid, type);
+ struct sigmatel_spec *spec = codec->spec;
+ struct sigmatel_mic_route *mic;
+
+ if (get_pin_presence(codec, spec->ext_mic.pin))
+ mic = &spec->ext_mic;
+ else
+ mic = &spec->int_mic;
+ if (mic->dmux_idx)
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ mic->dmux_idx);
+ else
+ snd_hda_codec_write_cache(codec, spec->mux_nids[0], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ mic->mux_idx);
+}
+
+static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid)
+{
+ struct sigmatel_event *event = stac_get_event(codec, nid);
if (!event)
return;
codec->patch_ops.unsol_event(codec, (unsigned)event->tag << 26);
@@ -4621,8 +4587,18 @@
switch (event->type) {
case STAC_HP_EVENT:
+ case STAC_LO_EVENT:
stac92xx_hp_detect(codec);
- /* fallthru */
+ break;
+ case STAC_MIC_EVENT:
+ stac92xx_mic_detect(codec);
+ break;
+ }
+
+ switch (event->type) {
+ case STAC_HP_EVENT:
+ case STAC_LO_EVENT:
+ case STAC_MIC_EVENT:
case STAC_INSERT_EVENT:
case STAC_PWR_EVENT:
if (spec->num_pwrs > 0)
@@ -4713,8 +4689,7 @@
snd_hda_codec_resume_cache(codec);
/* fake event to set up pins again to override cached values */
if (spec->hp_detect)
- stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0],
- STAC_HP_EVENT);
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0]);
return 0;
}
@@ -4754,6 +4729,19 @@
static int stac92xx_suspend(struct hda_codec *codec, pm_message_t state)
{
struct sigmatel_spec *spec = codec->spec;
+ int i;
+ hda_nid_t nid;
+
+ /* reset each pin before powering down DAC/ADC to avoid click noise */
+ nid = codec->start_nid;
+ for (i = 0; i < codec->num_nodes; i++, nid++) {
+ unsigned int wcaps = get_wcaps(codec, nid);
+ unsigned int wid_type = get_wcaps_type(wcaps);
+ if (wid_type == AC_WID_PIN)
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
+ }
+
if (spec->eapd_mask)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
@@ -4790,7 +4778,8 @@
stac9200_models,
stac9200_cfg_tbl);
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9200, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac9200_brd_tbl[spec->board_config]);
@@ -4862,8 +4851,8 @@
stac925x_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x,"
- "using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac925x_brd_tbl[spec->board_config]);
@@ -4893,6 +4882,9 @@
spec->init = stac925x_core_init;
spec->mixer = stac925x_mixer;
+ spec->num_caps = 1;
+ spec->capvols = stac925x_capvols;
+ spec->capsws = stac925x_capsws;
err = stac92xx_parse_auto_config(codec, 0x8, 0x7);
if (!err) {
@@ -4914,16 +4906,6 @@
return 0;
}
-static struct hda_input_mux stac92hd73xx_dmux = {
- .num_items = 4,
- .items = {
- { "Analog Inputs", 0x0b },
- { "Digital Mic 1", 0x09 },
- { "Digital Mic 2", 0x0a },
- { "CD", 0x08 },
- }
-};
-
static int patch_stac92hd73xx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
@@ -4943,10 +4925,16 @@
STAC_92HD73XX_MODELS,
stac92hd73xx_models,
stac92hd73xx_cfg_tbl);
+ /* check codec subsystem id if not found */
+ if (spec->board_config < 0)
+ spec->board_config =
+ snd_hda_check_board_codec_sid_config(codec,
+ STAC_92HD73XX_MODELS, stac92hd73xx_models,
+ stac92hd73xx_codec_id_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- " STAC92HD73XX, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac92hd73xx_brd_tbl[spec->board_config]);
@@ -4959,20 +4947,15 @@
"number of channels defaulting to DAC count\n");
num_dacs = STAC92HD73_DAC_COUNT;
}
+ spec->init = stac92hd73xx_core_init;
switch (num_dacs) {
case 0x3: /* 6 Channel */
- spec->mixer = stac92hd73xx_6ch_mixer;
- spec->init = stac92hd73xx_6ch_core_init;
spec->aloopback_ctl = stac92hd73xx_6ch_loopback;
break;
case 0x4: /* 8 Channel */
- spec->mixer = stac92hd73xx_8ch_mixer;
- spec->init = stac92hd73xx_8ch_core_init;
spec->aloopback_ctl = stac92hd73xx_8ch_loopback;
break;
case 0x5: /* 10 Channel */
- spec->mixer = stac92hd73xx_10ch_mixer;
- spec->init = stac92hd73xx_10ch_core_init;
spec->aloopback_ctl = stac92hd73xx_10ch_loopback;
break;
}
@@ -4987,14 +4970,14 @@
spec->dmic_nids = stac92hd73xx_dmic_nids;
spec->dmux_nids = stac92hd73xx_dmux_nids;
spec->smux_nids = stac92hd73xx_smux_nids;
- spec->amp_nids = stac92hd73xx_amp_nids;
- spec->num_amps = ARRAY_SIZE(stac92hd73xx_amp_nids);
spec->num_muxes = ARRAY_SIZE(stac92hd73xx_mux_nids);
spec->num_adcs = ARRAY_SIZE(stac92hd73xx_adc_nids);
spec->num_dmuxes = ARRAY_SIZE(stac92hd73xx_dmux_nids);
- memcpy(&spec->private_dimux, &stac92hd73xx_dmux,
- sizeof(stac92hd73xx_dmux));
+
+ spec->num_caps = STAC92HD73XX_NUM_CAPS;
+ spec->capvols = stac92hd73xx_capvols;
+ spec->capsws = stac92hd73xx_capsws;
switch (spec->board_config) {
case STAC_DELL_EQ:
@@ -5004,43 +4987,40 @@
case STAC_DELL_M6_DMIC:
case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
- spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
- spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
spec->eapd_switch = 0;
- spec->num_amps = 1;
- if (spec->board_config != STAC_DELL_EQ)
- spec->init = dell_m6_core_init;
switch (spec->board_config) {
case STAC_DELL_M6_AMIC: /* Analog Mics */
snd_hda_codec_set_pincfg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
- spec->private_dimux.num_items = 1;
break;
case STAC_DELL_M6_DMIC: /* Digital Mics */
snd_hda_codec_set_pincfg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
- spec->private_dimux.num_items = 2;
break;
case STAC_DELL_M6_BOTH: /* Both */
snd_hda_codec_set_pincfg(codec, 0x0b, 0x90A70170);
snd_hda_codec_set_pincfg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
- spec->private_dimux.num_items = 2;
break;
}
break;
+ case STAC_ALIENWARE_M17X:
+ spec->num_dmics = STAC92HD73XX_NUM_DMICS;
+ spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 0;
+ break;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
spec->eapd_switch = 1;
+ break;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
}
- spec->dinput_mux = &spec->private_dimux;
spec->num_pwrs = ARRAY_SIZE(stac92hd73xx_pwr_nids);
spec->pwr_nids = stac92hd73xx_pwr_nids;
@@ -5072,15 +5052,6 @@
return 0;
}
-static struct hda_input_mux stac92hd83xxx_dmux = {
- .num_items = 3,
- .items = {
- { "Analog Inputs", 0x03 },
- { "Digital Mic 1", 0x04 },
- { "Digital Mic 2", 0x05 },
- }
-};
-
static int patch_stac92hd83xxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
@@ -5097,32 +5068,30 @@
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->mono_nid = 0x19;
spec->digbeep_nid = 0x21;
- spec->dmic_nids = stac92hd83xxx_dmic_nids;
- spec->dmux_nids = stac92hd83xxx_dmux_nids;
+ spec->mux_nids = stac92hd83xxx_mux_nids;
+ spec->num_muxes = ARRAY_SIZE(stac92hd83xxx_mux_nids);
spec->adc_nids = stac92hd83xxx_adc_nids;
+ spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
spec->pwr_nids = stac92hd83xxx_pwr_nids;
- spec->amp_nids = stac92hd83xxx_amp_nids;
spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = spec->dac_nids;
spec->init = stac92hd83xxx_core_init;
- spec->mixer = stac92hd83xxx_mixer;
spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
- spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
- spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
- spec->num_amps = ARRAY_SIZE(stac92hd83xxx_amp_nids);
- spec->num_dmics = STAC92HD83XXX_NUM_DMICS;
- spec->dinput_mux = &stac92hd83xxx_dmux;
spec->pin_nids = stac92hd83xxx_pin_nids;
+ spec->num_caps = STAC92HD83XXX_NUM_CAPS;
+ spec->capvols = stac92hd83xxx_capvols;
+ spec->capsws = stac92hd83xxx_capsws;
+
spec->board_config = snd_hda_check_board_config(codec,
STAC_92HD83XXX_MODELS,
stac92hd83xxx_models,
stac92hd83xxx_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- " STAC92HD83XXX, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac92hd83xxx_brd_tbl[spec->board_config]);
@@ -5164,6 +5133,8 @@
num_dacs = snd_hda_get_connections(codec, nid,
conn, STAC92HD83_DAC_COUNT + 1) - 1;
+ if (num_dacs < 0)
+ num_dacs = STAC92HD83_DAC_COUNT;
/* set port X to select the last DAC
*/
@@ -5177,25 +5148,6 @@
return 0;
}
-static struct hda_input_mux stac92hd71bxx_dmux_nomixer = {
- .num_items = 3,
- .items = {
- { "Analog Inputs", 0x00 },
- { "Digital Mic 1", 0x02 },
- { "Digital Mic 2", 0x03 },
- }
-};
-
-static struct hda_input_mux stac92hd71bxx_dmux_amixer = {
- .num_items = 4,
- .items = {
- { "Analog Inputs", 0x00 },
- { "Mixer", 0x01 },
- { "Digital Mic 1", 0x02 },
- { "Digital Mic 2", 0x03 },
- }
-};
-
/* get the pin connection (fixed, none, etc) */
static unsigned int stac_get_defcfg_connect(struct hda_codec *codec, int idx)
{
@@ -5256,7 +5208,6 @@
struct sigmatel_spec *spec;
struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init;
int err = 0;
- unsigned int ndmic_nids = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
@@ -5285,8 +5236,8 @@
stac92hd71bxx_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- " STAC92HD71BXX, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac92hd71bxx_brd_tbl[spec->board_config]);
@@ -5301,6 +5252,10 @@
spec->dmic_nids = stac92hd71bxx_dmic_nids;
spec->dmux_nids = stac92hd71bxx_dmux_nids;
+ spec->num_caps = STAC92HD71BXX_NUM_CAPS;
+ spec->capvols = stac92hd71bxx_capvols;
+ spec->capsws = stac92hd71bxx_capsws;
+
switch (codec->vendor_id) {
case 0x111d76b6: /* 4 Port without Analog Mixer */
case 0x111d76b7:
@@ -5308,24 +5263,13 @@
/* fallthru */
case 0x111d76b4: /* 6 Port without Analog Mixer */
case 0x111d76b5:
- memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_nomixer,
- sizeof(stac92hd71bxx_dmux_nomixer));
- spec->mixer = stac92hd71bxx_mixer;
spec->init = stac92hd71bxx_core_init;
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
spec->num_dmics = stac92hd71bxx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
STAC92HD71BXX_NUM_DMICS);
- if (spec->num_dmics) {
- spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- spec->dinput_mux = &spec->private_dimux;
- ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1;
- }
break;
case 0x111d7608: /* 5 Port with Analog Mixer */
- memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer,
- sizeof(stac92hd71bxx_dmux_amixer));
- spec->private_dimux.num_items--;
switch (spec->board_config) {
case STAC_HP_M4:
/* Enable VREF power saving on GPIO1 detect */
@@ -5347,11 +5291,8 @@
/* no output amps */
spec->num_pwrs = 0;
- spec->mixer = stac92hd71bxx_analog_mixer;
- spec->dinput_mux = &spec->private_dimux;
-
/* disable VSW */
- spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF];
+ spec->init = stac92hd71bxx_core_init;
unmute_init++;
snd_hda_codec_set_pincfg(codec, 0x0f, 0x40f000f0);
snd_hda_codec_set_pincfg(codec, 0x19, 0x40f000f3);
@@ -5359,8 +5300,6 @@
spec->num_dmics = stac92hd71bxx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
STAC92HD71BXX_NUM_DMICS - 1);
- spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 2;
break;
case 0x111d7603: /* 6 Port with Analog Mixer */
if ((codec->revision_id & 0xf) == 1)
@@ -5370,17 +5309,12 @@
spec->num_pwrs = 0;
/* fallthru */
default:
- memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer,
- sizeof(stac92hd71bxx_dmux_amixer));
- spec->dinput_mux = &spec->private_dimux;
- spec->mixer = stac92hd71bxx_analog_mixer;
- spec->init = stac92hd71bxx_analog_core_init;
+ spec->init = stac92hd71bxx_core_init;
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
spec->num_dmics = stac92hd71bxx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
STAC92HD71BXX_NUM_DMICS);
- spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
- ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1;
+ break;
}
if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
@@ -5408,6 +5342,7 @@
spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
+ spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
switch (spec->board_config) {
@@ -5462,8 +5397,6 @@
#endif
spec->multiout.dac_nids = spec->dac_nids;
- if (spec->dinput_mux)
- spec->private_dimux.num_items += spec->num_dmics - ndmic_nids;
err = stac92xx_parse_auto_config(codec, 0x21, 0);
if (!err) {
@@ -5541,8 +5474,8 @@
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC922x, "
- "using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac922x_brd_tbl[spec->board_config]);
@@ -5555,7 +5488,10 @@
spec->num_pwrs = 0;
spec->init = stac922x_core_init;
- spec->mixer = stac922x_mixer;
+
+ spec->num_caps = STAC922X_NUM_CAPS;
+ spec->capvols = stac922x_capvols;
+ spec->capsws = stac922x_capsws;
spec->multiout.dac_nids = spec->dac_nids;
@@ -5604,8 +5540,8 @@
stac927x_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for"
- "STAC927x, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac927x_brd_tbl[spec->board_config]);
@@ -5630,7 +5566,6 @@
spec->num_dmics = 0;
spec->init = d965_core_init;
- spec->mixer = stac927x_mixer;
break;
case STAC_DELL_BIOS:
switch (codec->subsystem_id) {
@@ -5662,7 +5597,6 @@
spec->num_dmics = STAC927X_NUM_DMICS;
spec->init = d965_core_init;
- spec->mixer = stac927x_mixer;
spec->dmux_nids = stac927x_dmux_nids;
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
break;
@@ -5675,9 +5609,12 @@
spec->num_dmics = 0;
spec->init = stac927x_core_init;
- spec->mixer = stac927x_mixer;
}
+ spec->num_caps = STAC927X_NUM_CAPS;
+ spec->capvols = stac927x_capvols;
+ spec->capsws = stac927x_capsws;
+
spec->num_pwrs = 0;
spec->aloopback_ctl = stac927x_loopback;
spec->aloopback_mask = 0x40;
@@ -5739,7 +5676,8 @@
stac9205_cfg_tbl);
again:
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9205, using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac9205_brd_tbl[spec->board_config]);
@@ -5758,9 +5696,12 @@
spec->num_pwrs = 0;
spec->init = stac9205_core_init;
- spec->mixer = stac9205_mixer;
spec->aloopback_ctl = stac9205_loopback;
+ spec->num_caps = STAC9205_NUM_CAPS;
+ spec->capvols = stac9205_capvols;
+ spec->capsws = stac9205_capsws;
+
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
/* Turn on/off EAPD per HP plugging */
@@ -5835,12 +5776,6 @@
{}
};
-static struct snd_kcontrol_new stac9872_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT),
- { } /* end */
-};
-
static hda_nid_t stac9872_pin_nids[] = {
0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x11, 0x13, 0x14,
@@ -5854,6 +5789,11 @@
0x15
};
+static unsigned long stac9872_capvols[] = {
+ HDA_COMPOSE_AMP_VAL(0x09, 3, 0, HDA_INPUT),
+};
+#define stac9872_capsws stac9872_capvols
+
static unsigned int stac9872_vaio_pin_configs[9] = {
0x03211020, 0x411111f0, 0x411111f0, 0x03a15030,
0x411111f0, 0x90170110, 0x411111f0, 0x411111f0,
@@ -5891,8 +5831,8 @@
stac9872_models,
stac9872_cfg_tbl);
if (spec->board_config < 0)
- snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9872, "
- "using BIOS defaults\n");
+ snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+ codec->chip_name);
else
stac92xx_set_config_regs(codec,
stac9872_brd_tbl[spec->board_config]);
@@ -5902,8 +5842,10 @@
spec->adc_nids = stac9872_adc_nids;
spec->num_muxes = ARRAY_SIZE(stac9872_mux_nids);
spec->mux_nids = stac9872_mux_nids;
- spec->mixer = stac9872_mixer;
spec->init = stac9872_core_init;
+ spec->num_caps = 1;
+ spec->capvols = stac9872_capvols;
+ spec->capsws = stac9872_capsws;
err = stac92xx_parse_auto_config(codec, 0x10, 0x12);
if (err < 0) {
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 9008b4b..ee89db9 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1339,8 +1339,7 @@
for (i = 0; i < spec->num_adc_nids; i++) {
nid = spec->adc_nids[i];
while (nid) {
- type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
- >> AC_WCAP_TYPE_SHIFT;
+ type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_PIN)
break;
n = snd_hda_get_connections(codec, nid, conn,
@@ -1395,6 +1394,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708_capture_mixer;
spec->num_mixers++;
}
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index adc909e..9da2dae 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -379,6 +379,15 @@
unsigned char (*set_mclk)(struct snd_ice1712 *ice, unsigned int rate);
void (*set_spdif_clock)(struct snd_ice1712 *ice);
+#ifdef CONFIG_PM
+ int (*pm_suspend)(struct snd_ice1712 *);
+ int (*pm_resume)(struct snd_ice1712 *);
+ int pm_suspend_enabled:1;
+ int pm_saved_is_spdif_master:1;
+ unsigned int pm_saved_spdif_ctrl;
+ unsigned char pm_saved_spdif_cfg;
+ unsigned int pm_saved_route;
+#endif
};
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index cc84a83..af6e001 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -560,6 +560,7 @@
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
spin_lock(&ice->reg_lock);
old = inb(ICEMT1724(ice, DMA_CONTROL));
if (cmd == SNDRV_PCM_TRIGGER_START)
@@ -570,6 +571,10 @@
spin_unlock(&ice->reg_lock);
break;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ /* apps will have to restart stream */
+ break;
+
default:
return -EINVAL;
}
@@ -2262,7 +2267,7 @@
-static void __devinit snd_vt1724_chip_reset(struct snd_ice1712 *ice)
+static void snd_vt1724_chip_reset(struct snd_ice1712 *ice)
{
outb(VT1724_RESET , ICEREG1724(ice, CONTROL));
inb(ICEREG1724(ice, CONTROL)); /* pci posting flush */
@@ -2272,7 +2277,7 @@
msleep(10);
}
-static int __devinit snd_vt1724_chip_init(struct snd_ice1712 *ice)
+static int snd_vt1724_chip_init(struct snd_ice1712 *ice)
{
outb(ice->eeprom.data[ICE_EEP2_SYSCONF], ICEREG1724(ice, SYS_CFG));
outb(ice->eeprom.data[ICE_EEP2_ACLINK], ICEREG1724(ice, AC97_CFG));
@@ -2287,6 +2292,14 @@
outb(0, ICEREG1724(ice, POWERDOWN));
+ /* MPU_RX and TX irq masks are cleared later dynamically */
+ outb(VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX , ICEREG1724(ice, IRQMASK));
+
+ /* don't handle FIFO overrun/underruns (just yet),
+ * since they cause machine lockups
+ */
+ outb(VT1724_MULTI_FIFO_ERR, ICEMT1724(ice, DMA_INT_MASK));
+
return 0;
}
@@ -2431,6 +2444,8 @@
snd_vt1724_proc_init(ice);
synchronize_irq(pci->irq);
+ card->private_data = ice;
+
err = pci_request_regions(pci, "ICE1724");
if (err < 0) {
kfree(ice);
@@ -2459,14 +2474,6 @@
return -EIO;
}
- /* MPU_RX and TX irq masks are cleared later dynamically */
- outb(VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX , ICEREG1724(ice, IRQMASK));
-
- /* don't handle FIFO overrun/underruns (just yet),
- * since they cause machine lockups
- */
- outb(VT1724_MULTI_FIFO_ERR, ICEMT1724(ice, DMA_INT_MASK));
-
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, ice, &ops);
if (err < 0) {
snd_vt1724_free(ice);
@@ -2650,11 +2657,96 @@
pci_set_drvdata(pci, NULL);
}
+#ifdef CONFIG_PM
+static int snd_vt1724_suspend(struct pci_dev *pci, pm_message_t state)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_ice1712 *ice = card->private_data;
+
+ if (!ice->pm_suspend_enabled)
+ return 0;
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+
+ snd_pcm_suspend_all(ice->pcm);
+ snd_pcm_suspend_all(ice->pcm_pro);
+ snd_pcm_suspend_all(ice->pcm_ds);
+ snd_ac97_suspend(ice->ac97);
+
+ spin_lock_irq(&ice->reg_lock);
+ ice->pm_saved_is_spdif_master = ice->is_spdif_master(ice);
+ ice->pm_saved_spdif_ctrl = inw(ICEMT1724(ice, SPDIF_CTRL));
+ ice->pm_saved_spdif_cfg = inb(ICEREG1724(ice, SPDIF_CFG));
+ ice->pm_saved_route = inl(ICEMT1724(ice, ROUTE_PLAYBACK));
+ spin_unlock_irq(&ice->reg_lock);
+
+ if (ice->pm_suspend)
+ ice->pm_suspend(ice);
+
+ pci_disable_device(pci);
+ pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
+ return 0;
+}
+
+static int snd_vt1724_resume(struct pci_dev *pci)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_ice1712 *ice = card->private_data;
+
+ if (!ice->pm_suspend_enabled)
+ return 0;
+
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
+
+ if (pci_enable_device(pci) < 0) {
+ snd_card_disconnect(card);
+ return -EIO;
+ }
+
+ pci_set_master(pci);
+
+ snd_vt1724_chip_reset(ice);
+
+ if (snd_vt1724_chip_init(ice) < 0) {
+ snd_card_disconnect(card);
+ return -EIO;
+ }
+
+ if (ice->pm_resume)
+ ice->pm_resume(ice);
+
+ if (ice->pm_saved_is_spdif_master) {
+ /* switching to external clock via SPDIF */
+ ice->set_spdif_clock(ice);
+ } else {
+ /* internal on-card clock */
+ snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
+ }
+
+ update_spdif_bits(ice, ice->pm_saved_spdif_ctrl);
+
+ outb(ice->pm_saved_spdif_cfg, ICEREG1724(ice, SPDIF_CFG));
+ outl(ice->pm_saved_route, ICEMT1724(ice, ROUTE_PLAYBACK));
+
+ if (ice->ac97)
+ snd_ac97_resume(ice->ac97);
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ return 0;
+}
+#endif
+
static struct pci_driver driver = {
.name = "ICE1724",
.id_table = snd_vt1724_ids,
.probe = snd_vt1724_probe,
.remove = __devexit_p(snd_vt1724_remove),
+#ifdef CONFIG_PM
+ .suspend = snd_vt1724_suspend,
+ .resume = snd_vt1724_resume,
+#endif
};
static int __init alsa_card_ice1724_init(void)
diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c
index 043a938..c75515f 100644
--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -1077,7 +1077,7 @@
/*
* initialize the chip
*/
-static int __devinit prodigy_hd2_init(struct snd_ice1712 *ice)
+static void ak4396_init(struct snd_ice1712 *ice)
{
static unsigned short ak4396_inits[] = {
AK4396_CTRL1, 0x87, /* I2S Normal Mode, 24 bit */
@@ -1087,9 +1087,37 @@
AK4396_RCH_ATT, 0x00,
};
- struct prodigy_hifi_spec *spec;
unsigned int i;
+ /* initialize ak4396 codec */
+ /* reset codec */
+ ak4396_write(ice, AK4396_CTRL1, 0x86);
+ msleep(100);
+ ak4396_write(ice, AK4396_CTRL1, 0x87);
+
+ for (i = 0; i < ARRAY_SIZE(ak4396_inits); i += 2)
+ ak4396_write(ice, ak4396_inits[i], ak4396_inits[i+1]);
+}
+
+#ifdef CONFIG_PM
+static int __devinit prodigy_hd2_resume(struct snd_ice1712 *ice)
+{
+ /* initialize ak4396 codec and restore previous mixer volumes */
+ struct prodigy_hifi_spec *spec = ice->spec;
+ int i;
+ mutex_lock(&ice->gpio_mutex);
+ ak4396_init(ice);
+ for (i = 0; i < 2; i++)
+ ak4396_write(ice, AK4396_LCH_ATT + i, spec->vol[i] & 0xff);
+ mutex_unlock(&ice->gpio_mutex);
+ return 0;
+}
+#endif
+
+static int __devinit prodigy_hd2_init(struct snd_ice1712 *ice)
+{
+ struct prodigy_hifi_spec *spec;
+
ice->vt1720 = 0;
ice->vt1724 = 1;
@@ -1112,14 +1140,12 @@
return -ENOMEM;
ice->spec = spec;
- /* initialize ak4396 codec */
- /* reset codec */
- ak4396_write(ice, AK4396_CTRL1, 0x86);
- msleep(100);
- ak4396_write(ice, AK4396_CTRL1, 0x87);
-
- for (i = 0; i < ARRAY_SIZE(ak4396_inits); i += 2)
- ak4396_write(ice, ak4396_inits[i], ak4396_inits[i+1]);
+#ifdef CONFIG_PM
+ ice->pm_resume = &prodigy_hd2_resume;
+ ice->pm_suspend_enabled = 1;
+#endif
+
+ ak4396_init(ice);
return 0;
}
diff --git a/sound/pci/oxygen/oxygen_io.c b/sound/pci/oxygen/oxygen_io.c
index c1eb923..09b2b2a 100644
--- a/sound/pci/oxygen/oxygen_io.c
+++ b/sound/pci/oxygen/oxygen_io.c
@@ -215,17 +215,8 @@
void oxygen_write_i2c(struct oxygen *chip, u8 device, u8 map, u8 data)
{
- unsigned long timeout;
-
/* should not need more than about 300 us */
- timeout = jiffies + msecs_to_jiffies(1);
- do {
- if (!(oxygen_read16(chip, OXYGEN_2WIRE_BUS_STATUS)
- & OXYGEN_2WIRE_BUSY))
- break;
- udelay(1);
- cond_resched();
- } while (time_after_eq(timeout, jiffies));
+ msleep(1);
oxygen_write8(chip, OXYGEN_2WIRE_MAP, map);
oxygen_write8(chip, OXYGEN_2WIRE_DATA, data);
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index 312251d..9a8936e 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -260,6 +260,9 @@
* chip didn't if the first EEPROM word was overwritten.
*/
subdevice = oxygen_read_eeprom(chip, 2);
+ /* use default ID if EEPROM is missing */
+ if (subdevice == 0xffff)
+ subdevice = 0x8788;
/*
* We use only the subsystem device ID for searching because it is
* unique even without the subsystem vendor ID, which may have been
diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c
index 3b5ca70..ef2345d 100644
--- a/sound/pci/oxygen/oxygen_pcm.c
+++ b/sound/pci/oxygen/oxygen_pcm.c
@@ -469,9 +469,11 @@
oxygen_write16_masked(chip, OXYGEN_I2S_MULTICH_FORMAT,
oxygen_rate(hw_params) |
chip->model.dac_i2s_format |
+ oxygen_i2s_mclk(hw_params) |
oxygen_i2s_bits(hw_params),
OXYGEN_I2S_RATE_MASK |
OXYGEN_I2S_FORMAT_MASK |
+ OXYGEN_I2S_MCLK_MASK |
OXYGEN_I2S_BITS_MASK);
oxygen_update_dac_routing(chip);
oxygen_update_spdif_source(chip);
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 3da5c02..7bb827c 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -3294,15 +3294,33 @@
char *clock_source;
int x;
- if (hdsp_check_for_iobox (hdsp)) {
- snd_iprintf(buffer, "No I/O box connected.\nPlease connect one and upload firmware.\n");
+ status = hdsp_read(hdsp, HDSP_statusRegister);
+ status2 = hdsp_read(hdsp, HDSP_status2Register);
+
+ snd_iprintf(buffer, "%s (Card #%d)\n", hdsp->card_name,
+ hdsp->card->number + 1);
+ snd_iprintf(buffer, "Buffers: capture %p playback %p\n",
+ hdsp->capture_buffer, hdsp->playback_buffer);
+ snd_iprintf(buffer, "IRQ: %d Registers bus: 0x%lx VM: 0x%lx\n",
+ hdsp->irq, hdsp->port, (unsigned long)hdsp->iobase);
+ snd_iprintf(buffer, "Control register: 0x%x\n", hdsp->control_register);
+ snd_iprintf(buffer, "Control2 register: 0x%x\n",
+ hdsp->control2_register);
+ snd_iprintf(buffer, "Status register: 0x%x\n", status);
+ snd_iprintf(buffer, "Status2 register: 0x%x\n", status2);
+
+ if (hdsp_check_for_iobox(hdsp)) {
+ snd_iprintf(buffer, "No I/O box connected.\n"
+ "Please connect one and upload firmware.\n");
return;
- }
+ }
if (hdsp_check_for_firmware(hdsp, 0)) {
if (hdsp->state & HDSP_FirmwareCached) {
if (snd_hdsp_load_firmware_from_cache(hdsp) != 0) {
- snd_iprintf(buffer, "Firmware loading from cache failed, please upload manually.\n");
+ snd_iprintf(buffer, "Firmware loading from "
+ "cache failed, "
+ "please upload manually.\n");
return;
}
} else {
@@ -3319,18 +3337,6 @@
}
}
- status = hdsp_read(hdsp, HDSP_statusRegister);
- status2 = hdsp_read(hdsp, HDSP_status2Register);
-
- snd_iprintf(buffer, "%s (Card #%d)\n", hdsp->card_name, hdsp->card->number + 1);
- snd_iprintf(buffer, "Buffers: capture %p playback %p\n",
- hdsp->capture_buffer, hdsp->playback_buffer);
- snd_iprintf(buffer, "IRQ: %d Registers bus: 0x%lx VM: 0x%lx\n",
- hdsp->irq, hdsp->port, (unsigned long)hdsp->iobase);
- snd_iprintf(buffer, "Control register: 0x%x\n", hdsp->control_register);
- snd_iprintf(buffer, "Control2 register: 0x%x\n", hdsp->control2_register);
- snd_iprintf(buffer, "Status register: 0x%x\n", status);
- snd_iprintf(buffer, "Status2 register: 0x%x\n", status2);
snd_iprintf(buffer, "FIFO status: %d\n", hdsp_read(hdsp, HDSP_fifoStatus) & 0xff);
snd_iprintf(buffer, "MIDI1 Output status: 0x%x\n", hdsp_read(hdsp, HDSP_midiStatusOut0));
snd_iprintf(buffer, "MIDI1 Input status: 0x%x\n", hdsp_read(hdsp, HDSP_midiStatusIn0));
@@ -3351,7 +3357,6 @@
snd_iprintf(buffer, "\n");
-
switch (hdsp_clock_source(hdsp)) {
case HDSP_CLOCK_SOURCE_AUTOSYNC:
clock_source = "AutoSync";
diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c
index 6416d3f..a69e774 100644
--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -885,10 +885,10 @@
struct vx_core *_chip = snd_kcontrol_chip(kcontrol);
struct snd_vx222 *chip = (struct snd_vx222 *)_chip;
if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[0] > MIC_LEVEL_MAX)
return -EINVAL;
if (ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] < MIC_LEVEL_MAX)
+ ucontrol->value.integer.value[1] > MIC_LEVEL_MAX)
return -EINVAL;
mutex_lock(&_chip->mixer_mutex);
if (chip->input_level[0] != ucontrol->value.integer.value[0] ||
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index 2f09252..5518371 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -834,7 +834,7 @@
status = snd_ymfpci_readw(chip, YDSXGR_INTFLAG);
if (status & 1) {
if (chip->timer)
- snd_timer_interrupt(chip->timer, chip->timer->sticks);
+ snd_timer_interrupt(chip->timer, chip->timer_ticks);
}
snd_ymfpci_writew(chip, YDSXGR_INTFLAG, status);
@@ -1885,8 +1885,18 @@
unsigned int count;
chip = snd_timer_chip(timer);
- count = (timer->sticks << 1) - 1;
spin_lock_irqsave(&chip->reg_lock, flags);
+ if (timer->sticks > 1) {
+ chip->timer_ticks = timer->sticks;
+ count = timer->sticks - 1;
+ } else {
+ /*
+ * Divisor 1 is not allowed; fake it by using divisor 2 and
+ * counting two ticks for each interrupt.
+ */
+ chip->timer_ticks = 2;
+ count = 2 - 1;
+ }
snd_ymfpci_writew(chip, YDSXGR_TIMERCOUNT, count);
snd_ymfpci_writeb(chip, YDSXGR_TIMERCTRL, 0x03);
spin_unlock_irqrestore(&chip->reg_lock, flags);
@@ -1909,14 +1919,14 @@
unsigned long *num, unsigned long *den)
{
*num = 1;
- *den = 48000;
+ *den = 96000;
return 0;
}
static struct snd_timer_hardware snd_ymfpci_timer_hw = {
.flags = SNDRV_TIMER_HW_AUTO,
- .resolution = 20833, /* 1/fs = 20.8333...us */
- .ticks = 0x8000,
+ .resolution = 10417, /* 1 / 96 kHz = 10.41666...us */
+ .ticks = 0x10000,
.start = snd_ymfpci_timer_start,
.stop = snd_ymfpci_timer_stop,
.precise_resolution = snd_ymfpci_timer_precise_resolution,
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index d3e786a..b1749bc 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -29,6 +29,7 @@
source "sound/soc/blackfin/Kconfig"
source "sound/soc/davinci/Kconfig"
source "sound/soc/fsl/Kconfig"
+source "sound/soc/imx/Kconfig"
source "sound/soc/omap/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/s3c24xx/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 6f1e28d..0c5eac0 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -1,4 +1,4 @@
-snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o
+snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
obj-$(CONFIG_SND_SOC) += codecs/
@@ -7,6 +7,7 @@
obj-$(CONFIG_SND_SOC) += blackfin/
obj-$(CONFIG_SND_SOC) += davinci/
obj-$(CONFIG_SND_SOC) += fsl/
+obj-$(CONFIG_SND_SOC) += imx/
obj-$(CONFIG_SND_SOC) += omap/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += s3c24xx/
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 173a239..885ba01 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -56,133 +56,32 @@
#define MCLK_RATE 12000000
+/*
+ * As shipped the board does not have inputs. However, it is relatively
+ * straightforward to modify the board to hook them up so support is left
+ * in the driver.
+ */
+#undef ENABLE_MIC_INPUT
+
static struct clk *mclk;
-static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- int ret;
-
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
- MCLK_RATE, SND_SOC_CLOCK_IN);
- if (ret < 0) {
- clk_disable(mclk);
- return ret;
- }
-
- return 0;
-}
-
-static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-
- dev_dbg(rtd->socdev->dev, "shutdown");
-}
-
static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- struct atmel_ssc_info *ssc_p = cpu_dai->private_data;
- struct ssc_device *ssc = ssc_p->ssc;
int ret;
- unsigned int rate;
- int cmr_div, period;
-
- if (ssc == NULL) {
- printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n");
- return -EINVAL;
- }
-
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
- if (ret < 0)
- return ret;
-
- /*
- * The SSC clock dividers depend on the sample rate. The CMR.DIV
- * field divides the system master clock MCK to drive the SSC TK
- * signal which provides the codec BCLK. The TCMR.PERIOD and
- * RCMR.PERIOD fields further divide the BCLK signal to drive
- * the SSC TF and RF signals which provide the codec DACLRC and
- * ADCLRC clocks.
- *
- * The dividers were determined through trial and error, where a
- * CMR.DIV value is chosen such that the resulting BCLK value is
- * divisible, or almost divisible, by (2 * sample rate), and then
- * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
- */
- rate = params_rate(params);
-
- switch (rate) {
- case 8000:
- cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */
- period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */
- break;
- case 11025:
- cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */
- period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */
- break;
- case 16000:
- cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */
- period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */
- break;
- case 22050:
- cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */
- period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */
- break;
- case 32000:
- cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */
- period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */
- break;
- case 44100:
- cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
- period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */
- break;
- case 48000:
- cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */
- period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */
- break;
- case 88200:
- cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
- period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */
- break;
- case 96000:
- cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */
- period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */
- break;
- default:
- printk(KERN_WARNING "unsupported rate %d"
- " on at91sam9g20ek board\n", rate);
- return -EINVAL;
- }
-
- /* set the MCK divider for BCLK */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div);
- if (ret < 0)
- return ret;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- /* set the BCLK divider for DACLRC */
- ret = snd_soc_dai_set_clkdiv(cpu_dai,
- ATMEL_SSC_TCMR_PERIOD, period);
- } else {
- /* set the BCLK divider for ADCLRC */
- ret = snd_soc_dai_set_clkdiv(cpu_dai,
- ATMEL_SSC_RCMR_PERIOD, period);
- }
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
@@ -190,9 +89,7 @@
}
static struct snd_soc_ops at91sam9g20ek_ops = {
- .startup = at91sam9g20ek_startup,
.hw_params = at91sam9g20ek_hw_params,
- .shutdown = at91sam9g20ek_shutdown,
};
static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
@@ -241,10 +138,20 @@
*/
static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
{
+ struct snd_soc_dai *codec_dai = &codec->dai[0];
+ int ret;
+
printk(KERN_DEBUG
"at91sam9g20ek_wm8731 "
": at91sam9g20ek_wm8731_init() called\n");
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ MCLK_RATE, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret);
+ return ret;
+ }
+
/* Add specific widgets */
snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
@@ -255,8 +162,13 @@
snd_soc_dapm_nc_pin(codec, "RLINEIN");
snd_soc_dapm_nc_pin(codec, "LLINEIN");
- /* always connected */
+#ifdef ENABLE_MIC_INPUT
snd_soc_dapm_enable_pin(codec, "Int Mic");
+#else
+ snd_soc_dapm_nc_pin(codec, "Int Mic");
+#endif
+
+ /* always connected */
snd_soc_dapm_enable_pin(codec, "Ext Spk");
snd_soc_dapm_sync(codec);
@@ -281,38 +193,6 @@
.set_bias_level = at91sam9g20ek_set_bias_level,
};
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct snd_soc_device at91sam9g20ek_snd_devdata = {
.card = &snd_soc_at91sam9g20ek,
.codec_dev = &soc_codec_dev_wm8731,
@@ -367,10 +247,6 @@
}
ssc_p->ssc = ssc;
- ret = wm8731_i2c_register();
- if (ret != 0)
- goto err_ssc;
-
at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
if (!at91sam9g20ek_snd_device) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c
index 479d7bd..a521aa9 100644
--- a/sound/soc/au1x/psc-ac97.c
+++ b/sound/soc/au1x/psc-ac97.c
@@ -1,8 +1,8 @@
/*
* Au12x0/Au1550 PSC ALSA ASoC audio support.
*
- * (c) 2007-2008 MSC Vertriebsges.m.b.H.,
- * Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2007-2009 MSC Vertriebsges.m.b.H.,
+ * Manuel Lauss <manuel.lauss@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include <linux/suspend.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -29,6 +30,9 @@
#include "psc.h"
+/* how often to retry failed codec register reads/writes */
+#define AC97_RW_RETRIES 5
+
#define AC97_DIR \
(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
@@ -45,6 +49,9 @@
#define AC97PCR_CLRFIFO(stype) \
((stype) == PCM_TX ? PSC_AC97PCR_TC : PSC_AC97PCR_RC)
+#define AC97STAT_BUSY(stype) \
+ ((stype) == PCM_TX ? PSC_AC97STAT_TB : PSC_AC97STAT_RB)
+
/* instance data. There can be only one, MacLeod!!!! */
static struct au1xpsc_audio_data *au1xpsc_ac97_workdata;
@@ -54,24 +61,33 @@
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
- unsigned short data, tmo;
-
- au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg), AC97_CDC(pscdata));
- au_sync();
-
- tmo = 1000;
- while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)) && --tmo)
- udelay(2);
-
- if (!tmo)
- data = 0xffff;
- else
- data = au_readl(AC97_CDC(pscdata)) & 0xffff;
+ unsigned short data, retry, tmo;
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
- return data;
+ retry = AC97_RW_RETRIES;
+ do {
+ mutex_lock(&pscdata->lock);
+
+ au_writel(PSC_AC97CDC_RD | PSC_AC97CDC_INDX(reg),
+ AC97_CDC(pscdata));
+ au_sync();
+
+ tmo = 2000;
+ while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
+ && --tmo)
+ udelay(2);
+
+ data = au_readl(AC97_CDC(pscdata)) & 0xffff;
+
+ au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ au_sync();
+
+ mutex_unlock(&pscdata->lock);
+ } while (--retry && !tmo);
+
+ return retry ? data : 0xffff;
}
/* AC97 controller writes to codec register */
@@ -80,16 +96,29 @@
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
- unsigned int tmo;
-
- au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff), AC97_CDC(pscdata));
- au_sync();
- tmo = 1000;
- while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)) && --tmo)
- au_sync();
+ unsigned int tmo, retry;
au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
au_sync();
+
+ retry = AC97_RW_RETRIES;
+ do {
+ mutex_lock(&pscdata->lock);
+
+ au_writel(PSC_AC97CDC_INDX(reg) | (val & 0xffff),
+ AC97_CDC(pscdata));
+ au_sync();
+
+ tmo = 2000;
+ while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
+ && --tmo)
+ udelay(2);
+
+ au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
+ au_sync();
+
+ mutex_unlock(&pscdata->lock);
+ } while (--retry && !tmo);
}
/* AC97 controller asserts a warm reset */
@@ -129,9 +158,9 @@
au_sync();
/* wait for PSC to indicate it's ready */
- i = 100000;
+ i = 1000;
while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_SR)) && (--i))
- au_sync();
+ msleep(1);
if (i == 0) {
printk(KERN_ERR "au1xpsc-ac97: PSC not ready!\n");
@@ -143,9 +172,9 @@
au_sync();
/* wait for AC97 core to become ready */
- i = 100000;
+ i = 1000;
while (!((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && (--i))
- au_sync();
+ msleep(1);
if (i == 0)
printk(KERN_ERR "au1xpsc-ac97: AC97 ctrl not ready\n");
}
@@ -165,12 +194,12 @@
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
- unsigned long r, stat;
+ unsigned long r, ro, stat;
int chans, stype = SUBSTREAM_TYPE(substream);
chans = params_channels(params);
- r = au_readl(AC97_CFG(pscdata));
+ r = ro = au_readl(AC97_CFG(pscdata));
stat = au_readl(AC97_STAT(pscdata));
/* already active? */
@@ -180,9 +209,6 @@
(pscdata->rate != params_rate(params)))
return -EINVAL;
} else {
- /* disable AC97 device controller first */
- au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
- au_sync();
/* set sample bitdepth: REG[24:21]=(BITS-2)/2 */
r &= ~PSC_AC97CFG_LEN_MASK;
@@ -199,14 +225,40 @@
r |= PSC_AC97CFG_RXSLOT_ENA(4);
}
- /* finally enable the AC97 controller again */
+ /* do we need to poke the hardware? */
+ if (!(r ^ ro))
+ goto out;
+
+ /* ac97 engine is about to be disabled */
+ mutex_lock(&pscdata->lock);
+
+ /* disable AC97 device controller first... */
+ au_writel(r & ~PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
+ au_sync();
+
+ /* ...wait for it... */
+ while (au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)
+ asm volatile ("nop");
+
+ /* ...write config... */
+ au_writel(r, AC97_CFG(pscdata));
+ au_sync();
+
+ /* ...enable the AC97 controller again... */
au_writel(r | PSC_AC97CFG_DE_ENABLE, AC97_CFG(pscdata));
au_sync();
+ /* ...and wait for ready bit */
+ while (!(au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR))
+ asm volatile ("nop");
+
+ mutex_unlock(&pscdata->lock);
+
pscdata->cfg = r;
pscdata->rate = params_rate(params);
}
+out:
return 0;
}
@@ -222,6 +274,8 @@
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
+ au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
+ au_sync();
au_writel(AC97PCR_START(stype), AC97_PCR(pscdata));
au_sync();
break;
@@ -229,6 +283,13 @@
case SNDRV_PCM_TRIGGER_SUSPEND:
au_writel(AC97PCR_STOP(stype), AC97_PCR(pscdata));
au_sync();
+
+ while (au_readl(AC97_STAT(pscdata)) & AC97STAT_BUSY(stype))
+ asm volatile ("nop");
+
+ au_writel(AC97PCR_CLRFIFO(stype), AC97_PCR(pscdata));
+ au_sync();
+
break;
default:
ret = -EINVAL;
@@ -251,6 +312,8 @@
if (!au1xpsc_ac97_workdata)
return -ENOMEM;
+ mutex_init(&au1xpsc_ac97_workdata->lock);
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
ret = -ENODEV;
@@ -269,9 +332,9 @@
goto out1;
/* configuration: max dma trigger threshold, enable ac97 */
- au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
- PSC_AC97CFG_TT_FIFO8 |
- PSC_AC97CFG_DE_ENABLE;
+ au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
+ PSC_AC97CFG_TT_FIFO8 |
+ PSC_AC97CFG_DE_ENABLE;
/* preserve PSC clock source set up by platform (dev.platform_data
* is already occupied by soc layer)
@@ -386,4 +449,4 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Au12x0/Au1550 PSC AC97 ALSA ASoC audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
+MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
diff --git a/sound/soc/au1x/psc.h b/sound/soc/au1x/psc.h
index 8fdb1a04..3f474e8 100644
--- a/sound/soc/au1x/psc.h
+++ b/sound/soc/au1x/psc.h
@@ -29,6 +29,7 @@
unsigned long pm[2];
struct resource *ioarea;
+ struct mutex lock;
};
#define PCM_TX 0
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index 811596f..ac927ff 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -7,6 +7,15 @@
mode (supports single stereo In/Out).
You will also need to select the audio interfaces to support below.
+config SND_BF5XX_TDM
+ tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+ depends on (BLACKFIN && SND_SOC)
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in TDM
+ mode.
+ You will also need to select the audio interfaces to support below.
+
config SND_BF5XX_SOC_SSM2602
tristate "SoC SSM2602 Audio support for BF52x ezkit"
depends on SND_BF5XX_I2S
@@ -69,12 +78,24 @@
tristate
select SND_BF5XX_SOC_SPORT
+config SND_BF5XX_SOC_TDM
+ tristate
+ select SND_BF5XX_SOC_SPORT
+
config SND_BF5XX_SOC_AC97
tristate
select AC97_BUS
select SND_SOC_AC97_BUS
select SND_BF5XX_SOC_SPORT
+config SND_BF5XX_SOC_AD1836
+ tristate "SoC AD1836 Audio support for BF5xx"
+ depends on SND_BF5XX_TDM
+ select SND_BF5XX_SOC_TDM
+ select SND_SOC_AD1836
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
config SND_BF5XX_SOC_AD1980
tristate "SoC AD1980/1 Audio support for BF5xx"
depends on SND_BF5XX_AC97
@@ -83,9 +104,17 @@
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+config SND_BF5XX_SOC_AD1938
+ tristate "SoC AD1938 Audio support for Blackfin"
+ depends on SND_BF5XX_TDM
+ select SND_BF5XX_SOC_TDM
+ select SND_SOC_AD1938
+ help
+ Say Y if you want to add support for AD1938 codec on Blackfin.
+
config SND_BF5XX_SPORT_NUM
int "Set a SPORT for Sound chip"
- depends on (SND_BF5XX_I2S || SND_BF5XX_AC97)
+ depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
range 0 3 if BF54x
range 0 1 if !BF54x
default 0
diff --git a/sound/soc/blackfin/Makefile b/sound/soc/blackfin/Makefile
index 97bb37a..87e3042 100644
--- a/sound/soc/blackfin/Makefile
+++ b/sound/soc/blackfin/Makefile
@@ -1,21 +1,29 @@
# Blackfin Platform Support
snd-bf5xx-ac97-objs := bf5xx-ac97-pcm.o
snd-bf5xx-i2s-objs := bf5xx-i2s-pcm.o
+snd-bf5xx-tdm-objs := bf5xx-tdm-pcm.o
snd-soc-bf5xx-sport-objs := bf5xx-sport.o
snd-soc-bf5xx-ac97-objs := bf5xx-ac97.o
snd-soc-bf5xx-i2s-objs := bf5xx-i2s.o
+snd-soc-bf5xx-tdm-objs := bf5xx-tdm.o
obj-$(CONFIG_SND_BF5XX_AC97) += snd-bf5xx-ac97.o
obj-$(CONFIG_SND_BF5XX_I2S) += snd-bf5xx-i2s.o
+obj-$(CONFIG_SND_BF5XX_TDM) += snd-bf5xx-tdm.o
obj-$(CONFIG_SND_BF5XX_SOC_SPORT) += snd-soc-bf5xx-sport.o
obj-$(CONFIG_SND_BF5XX_SOC_AC97) += snd-soc-bf5xx-ac97.o
obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o
+obj-$(CONFIG_SND_BF5XX_SOC_TDM) += snd-soc-bf5xx-tdm.o
# Blackfin Machine Support
+snd-ad1836-objs := bf5xx-ad1836.o
snd-ad1980-objs := bf5xx-ad1980.o
snd-ssm2602-objs := bf5xx-ssm2602.o
snd-ad73311-objs := bf5xx-ad73311.o
+snd-ad1938-objs := bf5xx-ad1938.o
+obj-$(CONFIG_SND_BF5XX_SOC_AD1836) += snd-ad1836.o
obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o
obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o
obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o
+obj-$(CONFIG_SND_BF5XX_SOC_AD1938) += snd-ad1938.o
diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c
index b1ed423..2758b90 100644
--- a/sound/soc/blackfin/bf5xx-ac97.c
+++ b/sound/soc/blackfin/bf5xx-ac97.c
@@ -277,28 +277,24 @@
if (!dai->active)
return 0;
- ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
+ ret = sport_set_multichannel(sport, 16, 0x1F, 1);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
+ ret = sport_config_rx(sport, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
+ ret = sport_config_tx(sport, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- if (dai->capture.active)
- sport_rx_start(sport);
- if (dai->playback.active)
- sport_tx_start(sport);
return 0;
}
diff --git a/sound/soc/blackfin/bf5xx-ad1836.c b/sound/soc/blackfin/bf5xx-ad1836.c
new file mode 100644
index 0000000..cd361e3
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-ad1836.c
@@ -0,0 +1,128 @@
+/*
+ * File: sound/soc/blackfin/bf5xx-ad1836.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Aug 4 2009
+ * Description: Board driver for ad1836 sound chip
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm_params.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#include "../codecs/ad1836.h"
+#include "bf5xx-sport.h"
+
+#include "bf5xx-tdm-pcm.h"
+#include "bf5xx-tdm.h"
+
+static struct snd_soc_card bf5xx_ad1836;
+
+static int bf5xx_ad1836_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ cpu_dai->private_data = sport_handle;
+ return 0;
+}
+
+static int bf5xx_ad1836_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret = 0;
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops bf5xx_ad1836_ops = {
+ .startup = bf5xx_ad1836_startup,
+ .hw_params = bf5xx_ad1836_hw_params,
+};
+
+static struct snd_soc_dai_link bf5xx_ad1836_dai = {
+ .name = "ad1836",
+ .stream_name = "AD1836",
+ .cpu_dai = &bf5xx_tdm_dai,
+ .codec_dai = &ad1836_dai,
+ .ops = &bf5xx_ad1836_ops,
+};
+
+static struct snd_soc_card bf5xx_ad1836 = {
+ .name = "bf5xx_ad1836",
+ .platform = &bf5xx_tdm_soc_platform,
+ .dai_link = &bf5xx_ad1836_dai,
+ .num_links = 1,
+};
+
+static struct snd_soc_device bf5xx_ad1836_snd_devdata = {
+ .card = &bf5xx_ad1836,
+ .codec_dev = &soc_codec_dev_ad1836,
+};
+
+static struct platform_device *bfxx_ad1836_snd_device;
+
+static int __init bf5xx_ad1836_init(void)
+{
+ int ret;
+
+ bfxx_ad1836_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bfxx_ad1836_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(bfxx_ad1836_snd_device, &bf5xx_ad1836_snd_devdata);
+ bf5xx_ad1836_snd_devdata.dev = &bfxx_ad1836_snd_device->dev;
+ ret = platform_device_add(bfxx_ad1836_snd_device);
+
+ if (ret)
+ platform_device_put(bfxx_ad1836_snd_device);
+
+ return ret;
+}
+
+static void __exit bf5xx_ad1836_exit(void)
+{
+ platform_device_unregister(bfxx_ad1836_snd_device);
+}
+
+module_init(bf5xx_ad1836_init);
+module_exit(bf5xx_ad1836_exit);
+
+/* Module information */
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("ALSA SoC AD1836 board driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/blackfin/bf5xx-ad1938.c b/sound/soc/blackfin/bf5xx-ad1938.c
new file mode 100644
index 0000000..08269e9
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-ad1938.c
@@ -0,0 +1,142 @@
+/*
+ * File: sound/soc/blackfin/bf5xx-ad1938.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Thur June 4 2009
+ * Description: Board driver for ad1938 sound chip
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm_params.h>
+
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#include "../codecs/ad1938.h"
+#include "bf5xx-sport.h"
+
+#include "bf5xx-tdm-pcm.h"
+#include "bf5xx-tdm.h"
+
+static struct snd_soc_card bf5xx_ad1938;
+
+static int bf5xx_ad1938_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ cpu_dai->private_data = sport_handle;
+ return 0;
+}
+
+static int bf5xx_ad1938_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret = 0;
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set codec DAI slots, 8 channels, all channels are enabled */
+ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xFF, 8);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops bf5xx_ad1938_ops = {
+ .startup = bf5xx_ad1938_startup,
+ .hw_params = bf5xx_ad1938_hw_params,
+};
+
+static struct snd_soc_dai_link bf5xx_ad1938_dai = {
+ .name = "ad1938",
+ .stream_name = "AD1938",
+ .cpu_dai = &bf5xx_tdm_dai,
+ .codec_dai = &ad1938_dai,
+ .ops = &bf5xx_ad1938_ops,
+};
+
+static struct snd_soc_card bf5xx_ad1938 = {
+ .name = "bf5xx_ad1938",
+ .platform = &bf5xx_tdm_soc_platform,
+ .dai_link = &bf5xx_ad1938_dai,
+ .num_links = 1,
+};
+
+static struct snd_soc_device bf5xx_ad1938_snd_devdata = {
+ .card = &bf5xx_ad1938,
+ .codec_dev = &soc_codec_dev_ad1938,
+};
+
+static struct platform_device *bfxx_ad1938_snd_device;
+
+static int __init bf5xx_ad1938_init(void)
+{
+ int ret;
+
+ bfxx_ad1938_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bfxx_ad1938_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(bfxx_ad1938_snd_device, &bf5xx_ad1938_snd_devdata);
+ bf5xx_ad1938_snd_devdata.dev = &bfxx_ad1938_snd_device->dev;
+ ret = platform_device_add(bfxx_ad1938_snd_device);
+
+ if (ret)
+ platform_device_put(bfxx_ad1938_snd_device);
+
+ return ret;
+}
+
+static void __exit bf5xx_ad1938_exit(void)
+{
+ platform_device_unregister(bfxx_ad1938_snd_device);
+}
+
+module_init(bf5xx_ad1938_init);
+module_exit(bf5xx_ad1938_exit);
+
+/* Module information */
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("ALSA SoC AD1938 board driver");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c
index edfbdc0..9825b71 100644
--- a/sound/soc/blackfin/bf5xx-ad73311.c
+++ b/sound/soc/blackfin/bf5xx-ad73311.c
@@ -203,23 +203,23 @@
.codec_dev = &soc_codec_dev_ad73311,
};
-static struct platform_device *bf52x_ad73311_snd_device;
+static struct platform_device *bf5xx_ad73311_snd_device;
static int __init bf5xx_ad73311_init(void)
{
int ret;
pr_debug("%s enter\n", __func__);
- bf52x_ad73311_snd_device = platform_device_alloc("soc-audio", -1);
- if (!bf52x_ad73311_snd_device)
+ bf5xx_ad73311_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bf5xx_ad73311_snd_device)
return -ENOMEM;
- platform_set_drvdata(bf52x_ad73311_snd_device, &bf5xx_ad73311_snd_devdata);
- bf5xx_ad73311_snd_devdata.dev = &bf52x_ad73311_snd_device->dev;
- ret = platform_device_add(bf52x_ad73311_snd_device);
+ platform_set_drvdata(bf5xx_ad73311_snd_device, &bf5xx_ad73311_snd_devdata);
+ bf5xx_ad73311_snd_devdata.dev = &bf5xx_ad73311_snd_device->dev;
+ ret = platform_device_add(bf5xx_ad73311_snd_device);
if (ret)
- platform_device_put(bf52x_ad73311_snd_device);
+ platform_device_put(bf5xx_ad73311_snd_device);
return ret;
}
@@ -227,7 +227,7 @@
static void __exit bf5xx_ad73311_exit(void)
{
pr_debug("%s enter\n", __func__);
- platform_device_unregister(bf52x_ad73311_snd_device);
+ platform_device_unregister(bf5xx_ad73311_snd_device);
}
module_init(bf5xx_ad73311_init);
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c
index af06904..876abad 100644
--- a/sound/soc/blackfin/bf5xx-i2s.c
+++ b/sound/soc/blackfin/bf5xx-i2s.c
@@ -259,22 +259,18 @@
if (!dai->active)
return 0;
- ret = sport_config_rx(sport_handle, RFSR | RCKFE, RSFSE|0x1f, 0, 0);
+ ret = sport_config_rx(sport, RFSR | RCKFE, RSFSE|0x1f, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- ret = sport_config_tx(sport_handle, TFSR | TCKFE, TSFSE|0x1f, 0, 0);
+ ret = sport_config_tx(sport, TFSR | TCKFE, TSFSE|0x1f, 0, 0);
if (ret) {
pr_err("SPORT is busy!\n");
return -EBUSY;
}
- if (dai->capture.active)
- sport_rx_start(sport);
- if (dai->playback.active)
- sport_tx_start(sport);
return 0;
}
diff --git a/sound/soc/blackfin/bf5xx-ssm2602.c b/sound/soc/blackfin/bf5xx-ssm2602.c
index bc0cdde..3a00fa4 100644
--- a/sound/soc/blackfin/bf5xx-ssm2602.c
+++ b/sound/soc/blackfin/bf5xx-ssm2602.c
@@ -148,24 +148,24 @@
.codec_data = &bf5xx_ssm2602_setup,
};
-static struct platform_device *bf52x_ssm2602_snd_device;
+static struct platform_device *bf5xx_ssm2602_snd_device;
static int __init bf5xx_ssm2602_init(void)
{
int ret;
pr_debug("%s enter\n", __func__);
- bf52x_ssm2602_snd_device = platform_device_alloc("soc-audio", -1);
- if (!bf52x_ssm2602_snd_device)
+ bf5xx_ssm2602_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!bf5xx_ssm2602_snd_device)
return -ENOMEM;
- platform_set_drvdata(bf52x_ssm2602_snd_device,
+ platform_set_drvdata(bf5xx_ssm2602_snd_device,
&bf5xx_ssm2602_snd_devdata);
- bf5xx_ssm2602_snd_devdata.dev = &bf52x_ssm2602_snd_device->dev;
- ret = platform_device_add(bf52x_ssm2602_snd_device);
+ bf5xx_ssm2602_snd_devdata.dev = &bf5xx_ssm2602_snd_device->dev;
+ ret = platform_device_add(bf5xx_ssm2602_snd_device);
if (ret)
- platform_device_put(bf52x_ssm2602_snd_device);
+ platform_device_put(bf5xx_ssm2602_snd_device);
return ret;
}
@@ -173,7 +173,7 @@
static void __exit bf5xx_ssm2602_exit(void)
{
pr_debug("%s enter\n", __func__);
- platform_device_unregister(bf52x_ssm2602_snd_device);
+ platform_device_unregister(bf5xx_ssm2602_snd_device);
}
module_init(bf5xx_ssm2602_init);
diff --git a/sound/soc/blackfin/bf5xx-tdm-pcm.c b/sound/soc/blackfin/bf5xx-tdm-pcm.c
new file mode 100644
index 0000000..ccb5e82
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-tdm-pcm.c
@@ -0,0 +1,330 @@
+/*
+ * File: sound/soc/blackfin/bf5xx-tdm-pcm.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Tue June 06 2009
+ * Description: DMA driver for tdm codec
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+
+#include "bf5xx-tdm-pcm.h"
+#include "bf5xx-tdm.h"
+#include "bf5xx-sport.h"
+
+#define PCM_BUFFER_MAX 0x10000
+#define FRAGMENT_SIZE_MIN (4*1024)
+#define FRAGMENTS_MIN 2
+#define FRAGMENTS_MAX 32
+
+static void bf5xx_dma_irq(void *data)
+{
+ struct snd_pcm_substream *pcm = data;
+ snd_pcm_period_elapsed(pcm);
+}
+
+static const struct snd_pcm_hardware bf5xx_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_RESUME),
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .rates = SNDRV_PCM_RATE_48000,
+ .channels_min = 2,
+ .channels_max = 8,
+ .buffer_bytes_max = PCM_BUFFER_MAX,
+ .period_bytes_min = FRAGMENT_SIZE_MIN,
+ .period_bytes_max = PCM_BUFFER_MAX/2,
+ .periods_min = FRAGMENTS_MIN,
+ .periods_max = FRAGMENTS_MAX,
+};
+
+static int bf5xx_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ size_t size = bf5xx_pcm_hardware.buffer_bytes_max;
+ snd_pcm_lib_malloc_pages(substream, size * 4);
+
+ return 0;
+}
+
+static int bf5xx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ snd_pcm_lib_free_pages(substream);
+
+ return 0;
+}
+
+static int bf5xx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
+ int fragsize_bytes = frames_to_bytes(runtime, runtime->period_size);
+
+ fragsize_bytes /= runtime->channels;
+ /* inflate the fragsize to match the dma width of SPORT */
+ fragsize_bytes *= 8;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ sport_set_tx_callback(sport, bf5xx_dma_irq, substream);
+ sport_config_tx_dma(sport, runtime->dma_area,
+ runtime->periods, fragsize_bytes);
+ } else {
+ sport_set_rx_callback(sport, bf5xx_dma_irq, substream);
+ sport_config_rx_dma(sport, runtime->dma_area,
+ runtime->periods, fragsize_bytes);
+ }
+
+ return 0;
+}
+
+static int bf5xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sport_tx_start(sport);
+ else
+ sport_rx_start(sport);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sport_tx_stop(sport);
+ else
+ sport_rx_stop(sport);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t bf5xx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
+ unsigned int diff;
+ snd_pcm_uframes_t frames;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ diff = sport_curr_offset_tx(sport);
+ frames = diff / (8*4); /* 32 bytes per frame */
+ } else {
+ diff = sport_curr_offset_rx(sport);
+ frames = diff / (8*4);
+ }
+ return frames;
+}
+
+static int bf5xx_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &bf5xx_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ goto out;
+
+ if (sport_handle != NULL)
+ runtime->private_data = sport_handle;
+ else {
+ pr_err("sport_handle is NULL\n");
+ ret = -ENODEV;
+ }
+out:
+ return ret;
+}
+
+static int bf5xx_pcm_copy(struct snd_pcm_substream *substream, int channel,
+ snd_pcm_uframes_t pos, void *buf, snd_pcm_uframes_t count)
+{
+ unsigned int *src;
+ unsigned int *dst;
+ int i;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ src = buf;
+ dst = (unsigned int *)substream->runtime->dma_area;
+
+ dst += pos * 8;
+ while (count--) {
+ for (i = 0; i < substream->runtime->channels; i++)
+ *(dst + i) = *src++;
+ dst += 8;
+ }
+ } else {
+ src = (unsigned int *)substream->runtime->dma_area;
+ dst = buf;
+
+ src += pos * 8;
+ while (count--) {
+ for (i = 0; i < substream->runtime->channels; i++)
+ *dst++ = *(src+i);
+ src += 8;
+ }
+ }
+
+ return 0;
+}
+
+static int bf5xx_pcm_silence(struct snd_pcm_substream *substream,
+ int channel, snd_pcm_uframes_t pos, snd_pcm_uframes_t count)
+{
+ unsigned char *buf = substream->runtime->dma_area;
+ buf += pos * 8 * 4;
+ memset(buf, '\0', count * 8 * 4);
+
+ return 0;
+}
+
+
+struct snd_pcm_ops bf5xx_pcm_tdm_ops = {
+ .open = bf5xx_pcm_open,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = bf5xx_pcm_hw_params,
+ .hw_free = bf5xx_pcm_hw_free,
+ .prepare = bf5xx_pcm_prepare,
+ .trigger = bf5xx_pcm_trigger,
+ .pointer = bf5xx_pcm_pointer,
+ .copy = bf5xx_pcm_copy,
+ .silence = bf5xx_pcm_silence,
+};
+
+static int bf5xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = bf5xx_pcm_hardware.buffer_bytes_max;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_coherent(pcm->card->dev, size * 4,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area) {
+ pr_err("Failed to allocate dma memory \
+ Please increase uncached DMA memory region\n");
+ return -ENOMEM;
+ }
+ buf->bytes = size;
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sport_handle->tx_buf = buf->area;
+ else
+ sport_handle->rx_buf = buf->area;
+
+ return 0;
+}
+
+static void bf5xx_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+ dma_free_coherent(NULL, buf->bytes, buf->area, 0);
+ buf->area = NULL;
+ }
+ if (sport_handle)
+ sport_done(sport_handle);
+}
+
+static u64 bf5xx_pcm_dmamask = DMA_BIT_MASK(32);
+
+static int bf5xx_pcm_tdm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &bf5xx_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ if (dai->playback.channels_min) {
+ ret = bf5xx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ ret = bf5xx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+out:
+ return ret;
+}
+
+struct snd_soc_platform bf5xx_tdm_soc_platform = {
+ .name = "bf5xx-audio",
+ .pcm_ops = &bf5xx_pcm_tdm_ops,
+ .pcm_new = bf5xx_pcm_tdm_new,
+ .pcm_free = bf5xx_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(bf5xx_tdm_soc_platform);
+
+static int __init bfin_pcm_tdm_init(void)
+{
+ return snd_soc_register_platform(&bf5xx_tdm_soc_platform);
+}
+module_init(bfin_pcm_tdm_init);
+
+static void __exit bfin_pcm_tdm_exit(void)
+{
+ snd_soc_unregister_platform(&bf5xx_tdm_soc_platform);
+}
+module_exit(bfin_pcm_tdm_exit);
+
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("ADI Blackfin TDM PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/blackfin/bf5xx-tdm-pcm.h b/sound/soc/blackfin/bf5xx-tdm-pcm.h
new file mode 100644
index 0000000..ddc5047
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-tdm-pcm.h
@@ -0,0 +1,21 @@
+/*
+ * sound/soc/blackfin/bf5xx-tdm-pcm.h -- ALSA PCM interface for the Blackfin
+ *
+ * Copyright 2009 Analog Device Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BF5XX_TDM_PCM_H
+#define _BF5XX_TDM_PCM_H
+
+struct bf5xx_pcm_dma_params {
+ char *name; /* stream identifier */
+};
+
+/* platform data */
+extern struct snd_soc_platform bf5xx_tdm_soc_platform;
+
+#endif
diff --git a/sound/soc/blackfin/bf5xx-tdm.c b/sound/soc/blackfin/bf5xx-tdm.c
new file mode 100644
index 0000000..3096bad
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-tdm.c
@@ -0,0 +1,343 @@
+/*
+ * File: sound/soc/blackfin/bf5xx-tdm.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Thurs June 04 2009
+ * Description: Blackfin I2S(TDM) CPU DAI driver
+ * Even though TDM mode can be as part of I2S DAI, but there
+ * are so much difference in configuration and data flow,
+ * it's very ugly to integrate I2S and TDM into a module
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/irq.h>
+#include <asm/portmux.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include "bf5xx-sport.h"
+#include "bf5xx-tdm.h"
+
+struct bf5xx_tdm_port {
+ u16 tcr1;
+ u16 rcr1;
+ u16 tcr2;
+ u16 rcr2;
+ int configured;
+};
+
+static struct bf5xx_tdm_port bf5xx_tdm;
+static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
+
+static struct sport_param sport_params[2] = {
+ {
+ .dma_rx_chan = CH_SPORT0_RX,
+ .dma_tx_chan = CH_SPORT0_TX,
+ .err_irq = IRQ_SPORT0_ERROR,
+ .regs = (struct sport_register *)SPORT0_TCR1,
+ },
+ {
+ .dma_rx_chan = CH_SPORT1_RX,
+ .dma_tx_chan = CH_SPORT1_TX,
+ .err_irq = IRQ_SPORT1_ERROR,
+ .regs = (struct sport_register *)SPORT1_TCR1,
+ }
+};
+
+/*
+ * Setting the TFS pin selector for SPORT 0 based on whether the selected
+ * port id F or G. If the port is F then no conflict should exist for the
+ * TFS. When Port G is selected and EMAC then there is a conflict between
+ * the PHY interrupt line and TFS. Current settings prevent the conflict
+ * by ignoring the TFS pin when Port G is selected. This allows both
+ * ssm2602 using Port G and EMAC concurrently.
+ */
+#ifdef CONFIG_BF527_SPORT0_PORTF
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
+#else
+#define LOCAL_SPORT0_TFS (0)
+#endif
+
+static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0},
+ {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI,
+ P_SPORT1_RSCLK, P_SPORT1_TFS, 0} };
+
+static int bf5xx_tdm_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ int ret = 0;
+
+ /* interface format:support TDM,slave mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown DAI format type\n", __func__);
+ ret = -EINVAL;
+ break;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ case SND_SOC_DAIFMT_CBM_CFS:
+ case SND_SOC_DAIFMT_CBS_CFM:
+ ret = -EINVAL;
+ break;
+ default:
+ printk(KERN_ERR "%s: Unknown DAI master type\n", __func__);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int bf5xx_tdm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int ret = 0;
+
+ bf5xx_tdm.tcr2 &= ~0x1f;
+ bf5xx_tdm.rcr2 &= ~0x1f;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bf5xx_tdm.tcr2 |= 31;
+ bf5xx_tdm.rcr2 |= 31;
+ sport_handle->wdsize = 4;
+ break;
+ /* at present, we only support 32bit transfer */
+ default:
+ pr_err("not supported PCM format yet\n");
+ return -EINVAL;
+ break;
+ }
+
+ if (!bf5xx_tdm.configured) {
+ /*
+ * TX and RX are not independent,they are enabled at the
+ * same time, even if only one side is running. So, we
+ * need to configure both of them at the time when the first
+ * stream is opened.
+ *
+ * CPU DAI:slave mode.
+ */
+ ret = sport_config_rx(sport_handle, bf5xx_tdm.rcr1,
+ bf5xx_tdm.rcr2, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ return -EBUSY;
+ }
+
+ ret = sport_config_tx(sport_handle, bf5xx_tdm.tcr1,
+ bf5xx_tdm.tcr2, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ return -EBUSY;
+ }
+
+ bf5xx_tdm.configured = 1;
+ }
+
+ return 0;
+}
+
+static void bf5xx_tdm_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ /* No active stream, SPORT is allowed to be configured again. */
+ if (!dai->active)
+ bf5xx_tdm.configured = 0;
+}
+
+#ifdef CONFIG_PM
+static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
+{
+ struct sport_device *sport =
+ (struct sport_device *)dai->private_data;
+
+ if (!dai->active)
+ return 0;
+ if (dai->capture.active)
+ sport_rx_stop(sport);
+ if (dai->playback.active)
+ sport_tx_stop(sport);
+ return 0;
+}
+
+static int bf5xx_tdm_resume(struct snd_soc_dai *dai)
+{
+ int ret;
+ struct sport_device *sport =
+ (struct sport_device *)dai->private_data;
+
+ if (!dai->active)
+ return 0;
+
+ ret = sport_set_multichannel(sport, 8, 0xFF, 1);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ }
+
+ ret = sport_config_rx(sport, IRFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ }
+
+ ret = sport_config_tx(sport, ITFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ }
+
+ return 0;
+}
+
+#else
+#define bf5xx_tdm_suspend NULL
+#define bf5xx_tdm_resume NULL
+#endif
+
+static struct snd_soc_dai_ops bf5xx_tdm_dai_ops = {
+ .hw_params = bf5xx_tdm_hw_params,
+ .set_fmt = bf5xx_tdm_set_dai_fmt,
+ .shutdown = bf5xx_tdm_shutdown,
+};
+
+struct snd_soc_dai bf5xx_tdm_dai = {
+ .name = "bf5xx-tdm",
+ .id = 0,
+ .suspend = bf5xx_tdm_suspend,
+ .resume = bf5xx_tdm_resume,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,},
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,},
+ .ops = &bf5xx_tdm_dai_ops,
+};
+EXPORT_SYMBOL_GPL(bf5xx_tdm_dai);
+
+static int __devinit bfin_tdm_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
+ pr_err("Requesting Peripherals failed\n");
+ return -EFAULT;
+ }
+
+ /* request DMA for SPORT */
+ sport_handle = sport_init(&sport_params[sport_num], 4, \
+ 8 * sizeof(u32), NULL);
+ if (!sport_handle) {
+ peripheral_free_list(&sport_req[sport_num][0]);
+ return -ENODEV;
+ }
+
+ /* SPORT works in TDM mode */
+ ret = sport_set_multichannel(sport_handle, 8, 0xFF, 1);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ goto sport_config_err;
+ }
+
+ ret = sport_config_rx(sport_handle, IRFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ goto sport_config_err;
+ }
+
+ ret = sport_config_tx(sport_handle, ITFS, 0x1F, 0, 0);
+ if (ret) {
+ pr_err("SPORT is busy!\n");
+ ret = -EBUSY;
+ goto sport_config_err;
+ }
+
+ ret = snd_soc_register_dai(&bf5xx_tdm_dai);
+ if (ret) {
+ pr_err("Failed to register DAI: %d\n", ret);
+ goto sport_config_err;
+ }
+ return 0;
+
+sport_config_err:
+ peripheral_free_list(&sport_req[sport_num][0]);
+ return ret;
+}
+
+static int __devexit bfin_tdm_remove(struct platform_device *pdev)
+{
+ peripheral_free_list(&sport_req[sport_num][0]);
+ snd_soc_unregister_dai(&bf5xx_tdm_dai);
+
+ return 0;
+}
+
+static struct platform_driver bfin_tdm_driver = {
+ .probe = bfin_tdm_probe,
+ .remove = __devexit_p(bfin_tdm_remove),
+ .driver = {
+ .name = "bfin-tdm",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bfin_tdm_init(void)
+{
+ return platform_driver_register(&bfin_tdm_driver);
+}
+module_init(bfin_tdm_init);
+
+static void __exit bfin_tdm_exit(void)
+{
+ platform_driver_unregister(&bfin_tdm_driver);
+}
+module_exit(bfin_tdm_exit);
+
+/* Module information */
+MODULE_AUTHOR("Barry Song");
+MODULE_DESCRIPTION("TDM driver for ADI Blackfin");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/blackfin/bf5xx-tdm.h b/sound/soc/blackfin/bf5xx-tdm.h
new file mode 100644
index 0000000..618ec3d
--- /dev/null
+++ b/sound/soc/blackfin/bf5xx-tdm.h
@@ -0,0 +1,14 @@
+/*
+ * sound/soc/blackfin/bf5xx-tdm.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BF5XX_TDM_H
+#define _BF5XX_TDM_H
+
+extern struct snd_soc_dai bf5xx_tdm_dai;
+
+#endif
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index bbc97fd..0edca93 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -12,11 +12,15 @@
tristate "Build all ASoC CODEC drivers"
select SND_SOC_L3
select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
+ select SND_SOC_AD1836 if SPI_MASTER
+ select SND_SOC_AD1938 if SPI_MASTER
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
select SND_SOC_AD73311 if I2C
select SND_SOC_AK4104 if SPI_MASTER
select SND_SOC_AK4535 if I2C
+ select SND_SOC_AK4642 if I2C
select SND_SOC_CS4270 if I2C
+ select SND_SOC_MAX9877 if I2C
select SND_SOC_PCM3008
select SND_SOC_SPDIF
select SND_SOC_SSM2602 if I2C
@@ -30,18 +34,23 @@
select SND_SOC_WM8350 if MFD_WM8350
select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8523 if I2C
select SND_SOC_WM8580 if I2C
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
+ select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
select SND_SOC_WM8940 if I2C
select SND_SOC_WM8960 if I2C
+ select SND_SOC_WM8961 if I2C
select SND_SOC_WM8971 if I2C
+ select SND_SOC_WM8974 if I2C
select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8990 if I2C
+ select SND_SOC_WM8993 if I2C
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
@@ -57,11 +66,21 @@
If unsure select "N".
+config SND_SOC_WM_HUBS
+ tristate
+ default y if SND_SOC_WM8993=y
+ default m if SND_SOC_WM8993=m
config SND_SOC_AC97_CODEC
tristate
select SND_AC97_CODEC
+config SND_SOC_AD1836
+ tristate
+
+config SND_SOC_AD1938
+ tristate
+
config SND_SOC_AD1980
tristate
@@ -74,6 +93,9 @@
config SND_SOC_AK4535
tristate
+config SND_SOC_AK4642
+ tristate
+
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate
@@ -86,6 +108,9 @@
bool
depends on SND_SOC_CS4270
+config SND_SOC_CX20442
+ tristate
+
config SND_SOC_L3
tristate
@@ -129,6 +154,9 @@
config SND_SOC_WM8510
tristate
+config SND_SOC_WM8523
+ tristate
+
config SND_SOC_WM8580
tristate
@@ -144,6 +172,9 @@
config SND_SOC_WM8753
tristate
+config SND_SOC_WM8776
+ tristate
+
config SND_SOC_WM8900
tristate
@@ -156,15 +187,24 @@
config SND_SOC_WM8960
tristate
+config SND_SOC_WM8961
+ tristate
+
config SND_SOC_WM8971
tristate
+config SND_SOC_WM8974
+ tristate
+
config SND_SOC_WM8988
tristate
config SND_SOC_WM8990
tristate
+config SND_SOC_WM8993
+ tristate
+
config SND_SOC_WM9081
tristate
@@ -176,3 +216,7 @@
config SND_SOC_WM9713
tristate
+
+# Amp
+config SND_SOC_MAX9877
+ tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 8b75305..fb4af28 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -1,9 +1,13 @@
snd-soc-ac97-objs := ac97.o
+snd-soc-ad1836-objs := ad1836.o
+snd-soc-ad1938-objs := ad1938.o
snd-soc-ad1980-objs := ad1980.o
snd-soc-ad73311-objs := ad73311.o
snd-soc-ak4104-objs := ak4104.o
snd-soc-ak4535-objs := ak4535.o
+snd-soc-ak4642-objs := ak4642.o
snd-soc-cs4270-objs := cs4270.o
+snd-soc-cx20442-objs := cx20442.o
snd-soc-l3-objs := l3.o
snd-soc-pcm3008-objs := pcm3008.o
snd-soc-spdif-objs := spdif_transciever.o
@@ -18,29 +22,42 @@
snd-soc-wm8350-objs := wm8350.o
snd-soc-wm8400-objs := wm8400.o
snd-soc-wm8510-objs := wm8510.o
+snd-soc-wm8523-objs := wm8523.o
snd-soc-wm8580-objs := wm8580.o
snd-soc-wm8728-objs := wm8728.o
snd-soc-wm8731-objs := wm8731.o
snd-soc-wm8750-objs := wm8750.o
snd-soc-wm8753-objs := wm8753.o
+snd-soc-wm8776-objs := wm8776.o
snd-soc-wm8900-objs := wm8900.o
snd-soc-wm8903-objs := wm8903.o
snd-soc-wm8940-objs := wm8940.o
snd-soc-wm8960-objs := wm8960.o
+snd-soc-wm8961-objs := wm8961.o
snd-soc-wm8971-objs := wm8971.o
+snd-soc-wm8974-objs := wm8974.o
snd-soc-wm8988-objs := wm8988.o
snd-soc-wm8990-objs := wm8990.o
+snd-soc-wm8993-objs := wm8993.o
snd-soc-wm9081-objs := wm9081.o
snd-soc-wm9705-objs := wm9705.o
snd-soc-wm9712-objs := wm9712.o
snd-soc-wm9713-objs := wm9713.o
+snd-soc-wm-hubs-objs := wm_hubs.o
+
+# Amp
+snd-soc-max9877-objs := max9877.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
+obj-$(CONFIG_SND_SOC_AD1836) += snd-soc-ad1836.o
+obj-$(CONFIG_SND_SOC_AD1938) += snd-soc-ad1938.o
obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o
obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o
obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o
+obj-$(CONFIG_SND_SOC_AK4642) += snd-soc-ak4642.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
+obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o
@@ -55,19 +72,28 @@
obj-$(CONFIG_SND_SOC_WM8350) += snd-soc-wm8350.o
obj-$(CONFIG_SND_SOC_WM8400) += snd-soc-wm8400.o
obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o
+obj-$(CONFIG_SND_SOC_WM8523) += snd-soc-wm8523.o
obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o
obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o
obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o
obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o
obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
+obj-$(CONFIG_SND_SOC_WM8776) += snd-soc-wm8776.o
obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
+obj-$(CONFIG_SND_SOC_WM8974) += snd-soc-wm8974.o
obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o
obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o
+obj-$(CONFIG_SND_SOC_WM8961) += snd-soc-wm8961.o
obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
+obj-$(CONFIG_SND_SOC_WM8993) += snd-soc-wm8993.o
obj-$(CONFIG_SND_SOC_WM9081) += snd-soc-wm9081.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
+obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
+
+# Amp
+obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c
new file mode 100644
index 0000000..3612bb9
--- /dev/null
+++ b/sound/soc/codecs/ad1836.c
@@ -0,0 +1,446 @@
+/*
+ * File: sound/soc/codecs/ad1836.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Aug 04 2009
+ * Description: Driver for AD1836 sound chip
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-dapm.h>
+#include <linux/spi/spi.h>
+#include "ad1836.h"
+
+/* codec private data */
+struct ad1836_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[AD1836_NUM_REGS];
+};
+
+static struct snd_soc_codec *ad1836_codec;
+struct snd_soc_codec_device soc_codec_dev_ad1836;
+static int ad1836_register(struct ad1836_priv *ad1836);
+static void ad1836_unregister(struct ad1836_priv *ad1836);
+
+/*
+ * AD1836 volume/mute/de-emphasis etc. controls
+ */
+static const char *ad1836_deemp[] = {"None", "44.1kHz", "32kHz", "48kHz"};
+
+static const struct soc_enum ad1836_deemp_enum =
+ SOC_ENUM_SINGLE(AD1836_DAC_CTRL1, 8, 4, ad1836_deemp);
+
+static const struct snd_kcontrol_new ad1836_snd_controls[] = {
+ /* DAC volume control */
+ SOC_DOUBLE_R("DAC1 Volume", AD1836_DAC_L1_VOL,
+ AD1836_DAC_R1_VOL, 0, 0x3FF, 0),
+ SOC_DOUBLE_R("DAC2 Volume", AD1836_DAC_L2_VOL,
+ AD1836_DAC_R2_VOL, 0, 0x3FF, 0),
+ SOC_DOUBLE_R("DAC3 Volume", AD1836_DAC_L3_VOL,
+ AD1836_DAC_R3_VOL, 0, 0x3FF, 0),
+
+ /* ADC switch control */
+ SOC_DOUBLE("ADC1 Switch", AD1836_ADC_CTRL2, AD1836_ADCL1_MUTE,
+ AD1836_ADCR1_MUTE, 1, 1),
+ SOC_DOUBLE("ADC2 Switch", AD1836_ADC_CTRL2, AD1836_ADCL2_MUTE,
+ AD1836_ADCR2_MUTE, 1, 1),
+
+ /* DAC switch control */
+ SOC_DOUBLE("DAC1 Switch", AD1836_DAC_CTRL2, AD1836_DACL1_MUTE,
+ AD1836_DACR1_MUTE, 1, 1),
+ SOC_DOUBLE("DAC2 Switch", AD1836_DAC_CTRL2, AD1836_DACL2_MUTE,
+ AD1836_DACR2_MUTE, 1, 1),
+ SOC_DOUBLE("DAC3 Switch", AD1836_DAC_CTRL2, AD1836_DACL3_MUTE,
+ AD1836_DACR3_MUTE, 1, 1),
+
+ /* ADC high-pass filter */
+ SOC_SINGLE("ADC High Pass Filter Switch", AD1836_ADC_CTRL1,
+ AD1836_ADC_HIGHPASS_FILTER, 1, 0),
+
+ /* DAC de-emphasis */
+ SOC_ENUM("Playback Deemphasis", ad1836_deemp_enum),
+};
+
+static const struct snd_soc_dapm_widget ad1836_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("DAC", "Playback", AD1836_DAC_CTRL1,
+ AD1836_DAC_POWERDOWN, 1),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SUPPLY("ADC_PWR", AD1836_ADC_CTRL1,
+ AD1836_ADC_POWERDOWN, 1, NULL, 0),
+ SND_SOC_DAPM_OUTPUT("DAC1OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC2OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC3OUT"),
+ SND_SOC_DAPM_INPUT("ADC1IN"),
+ SND_SOC_DAPM_INPUT("ADC2IN"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DAC", NULL, "ADC_PWR" },
+ { "ADC", NULL, "ADC_PWR" },
+ { "DAC1OUT", "DAC1 Switch", "DAC" },
+ { "DAC2OUT", "DAC2 Switch", "DAC" },
+ { "DAC3OUT", "DAC3 Switch", "DAC" },
+ { "ADC", "ADC1 Switch", "ADC1IN" },
+ { "ADC", "ADC2 Switch", "ADC2IN" },
+};
+
+/*
+ * DAI ops entries
+ */
+
+static int ad1836_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ /* at present, we support adc aux mode to interface with
+ * blackfin sport tdm mode
+ */
+ case SND_SOC_DAIFMT_DSP_A:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ /* ALCLK,ABCLK are both output, AD1836 can only be master */
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ad1836_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int word_len = 0;
+
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ word_len = 3;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ word_len = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ case SNDRV_PCM_FORMAT_S32_LE:
+ word_len = 0;
+ break;
+ }
+
+ snd_soc_update_bits(codec, AD1836_DAC_CTRL1,
+ AD1836_DAC_WORD_LEN_MASK, word_len);
+
+ snd_soc_update_bits(codec, AD1836_ADC_CTRL2,
+ AD1836_ADC_WORD_LEN_MASK, word_len);
+
+ return 0;
+}
+
+
+/*
+ * interface to read/write ad1836 register
+ */
+#define AD1836_SPI_REG_SHFT 12
+#define AD1836_SPI_READ (1 << 11)
+#define AD1836_SPI_VAL_MSK 0x3FF
+
+/*
+ * write to the ad1836 register space
+ */
+
+static int ad1836_write_reg(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ int ret = 0;
+
+ if (value != reg_cache[reg]) {
+ unsigned short buf;
+ struct spi_transfer t = {
+ .tx_buf = &buf,
+ .len = 2,
+ };
+ struct spi_message m;
+
+ buf = (reg << AD1836_SPI_REG_SHFT) |
+ (value & AD1836_SPI_VAL_MSK);
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(codec->control_data, &m);
+ if (ret == 0)
+ reg_cache[reg] = value;
+ }
+
+ return ret;
+}
+
+/*
+ * read from the ad1836 register space cache
+ */
+static unsigned int ad1836_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *reg_cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ return reg_cache[reg];
+}
+
+static int __devinit ad1836_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_codec *codec;
+ struct ad1836_priv *ad1836;
+
+ ad1836 = kzalloc(sizeof(struct ad1836_priv), GFP_KERNEL);
+ if (ad1836 == NULL)
+ return -ENOMEM;
+
+ codec = &ad1836->codec;
+ codec->control_data = spi;
+ codec->dev = &spi->dev;
+
+ dev_set_drvdata(&spi->dev, ad1836);
+
+ return ad1836_register(ad1836);
+}
+
+static int __devexit ad1836_spi_remove(struct spi_device *spi)
+{
+ struct ad1836_priv *ad1836 = dev_get_drvdata(&spi->dev);
+
+ ad1836_unregister(ad1836);
+ return 0;
+}
+
+static struct spi_driver ad1836_spi_driver = {
+ .driver = {
+ .name = "ad1836-spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad1836_spi_probe,
+ .remove = __devexit_p(ad1836_spi_remove),
+};
+
+static struct snd_soc_dai_ops ad1836_dai_ops = {
+ .hw_params = ad1836_hw_params,
+ .set_fmt = ad1836_set_dai_fmt,
+};
+
+/* codec DAI instance */
+struct snd_soc_dai ad1836_dai = {
+ .name = "AD1836",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 6,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 4,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .ops = &ad1836_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ad1836_dai);
+
+static int ad1836_register(struct ad1836_priv *ad1836)
+{
+ int ret;
+ struct snd_soc_codec *codec = &ad1836->codec;
+
+ if (ad1836_codec) {
+ dev_err(codec->dev, "Another ad1836 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+ codec->private_data = ad1836;
+ codec->reg_cache = ad1836->reg_cache;
+ codec->reg_cache_size = AD1836_NUM_REGS;
+ codec->name = "AD1836";
+ codec->owner = THIS_MODULE;
+ codec->dai = &ad1836_dai;
+ codec->num_dai = 1;
+ codec->write = ad1836_write_reg;
+ codec->read = ad1836_read_reg_cache;
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ ad1836_dai.dev = codec->dev;
+ ad1836_codec = codec;
+
+ /* default setting for ad1836 */
+ /* de-emphasis: 48kHz, power-on dac */
+ codec->write(codec, AD1836_DAC_CTRL1, 0x300);
+ /* unmute dac channels */
+ codec->write(codec, AD1836_DAC_CTRL2, 0x0);
+ /* high-pass filter enable, power-on adc */
+ codec->write(codec, AD1836_ADC_CTRL1, 0x100);
+ /* unmute adc channles, adc aux mode */
+ codec->write(codec, AD1836_ADC_CTRL2, 0x180);
+ /* left/right diff:PGA/MUX */
+ codec->write(codec, AD1836_ADC_CTRL3, 0x3A);
+ /* volume */
+ codec->write(codec, AD1836_DAC_L1_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_R1_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_L2_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_R2_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_L3_VOL, 0x3FF);
+ codec->write(codec, AD1836_DAC_R3_VOL, 0x3FF);
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ kfree(ad1836);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&ad1836_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ kfree(ad1836);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ad1836_unregister(struct ad1836_priv *ad1836)
+{
+ snd_soc_unregister_dai(&ad1836_dai);
+ snd_soc_unregister_codec(&ad1836->codec);
+ kfree(ad1836);
+ ad1836_codec = NULL;
+}
+
+static int ad1836_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (ad1836_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = ad1836_codec;
+ codec = ad1836_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, ad1836_snd_controls,
+ ARRAY_SIZE(ad1836_snd_controls));
+ snd_soc_dapm_new_controls(codec, ad1836_dapm_widgets,
+ ARRAY_SIZE(ad1836_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int ad1836_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ad1836 = {
+ .probe = ad1836_probe,
+ .remove = ad1836_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ad1836);
+
+static int __init ad1836_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&ad1836_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register ad1836 SPI driver: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+module_init(ad1836_init);
+
+static void __exit ad1836_exit(void)
+{
+ spi_unregister_driver(&ad1836_spi_driver);
+}
+module_exit(ad1836_exit);
+
+MODULE_DESCRIPTION("ASoC ad1836 driver");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h
new file mode 100644
index 0000000..7660ee6
--- /dev/null
+++ b/sound/soc/codecs/ad1836.h
@@ -0,0 +1,64 @@
+/*
+ * File: sound/soc/codecs/ad1836.h
+ * Based on:
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: Aug 04, 2009
+ * Description: definitions for AD1836 registers
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AD1836_H__
+#define __AD1836_H__
+
+#define AD1836_DAC_CTRL1 0
+#define AD1836_DAC_POWERDOWN 2
+#define AD1836_DAC_SERFMT_MASK 0xE0
+#define AD1836_DAC_SERFMT_PCK256 (0x4 << 5)
+#define AD1836_DAC_SERFMT_PCK128 (0x5 << 5)
+#define AD1836_DAC_WORD_LEN_MASK 0x18
+
+#define AD1836_DAC_CTRL2 1
+#define AD1836_DACL1_MUTE 0
+#define AD1836_DACR1_MUTE 1
+#define AD1836_DACL2_MUTE 2
+#define AD1836_DACR2_MUTE 3
+#define AD1836_DACL3_MUTE 4
+#define AD1836_DACR3_MUTE 5
+
+#define AD1836_DAC_L1_VOL 2
+#define AD1836_DAC_R1_VOL 3
+#define AD1836_DAC_L2_VOL 4
+#define AD1836_DAC_R2_VOL 5
+#define AD1836_DAC_L3_VOL 6
+#define AD1836_DAC_R3_VOL 7
+
+#define AD1836_ADC_CTRL1 12
+#define AD1836_ADC_POWERDOWN 7
+#define AD1836_ADC_HIGHPASS_FILTER 8
+
+#define AD1836_ADC_CTRL2 13
+#define AD1836_ADCL1_MUTE 0
+#define AD1836_ADCR1_MUTE 1
+#define AD1836_ADCL2_MUTE 2
+#define AD1836_ADCR2_MUTE 3
+#define AD1836_ADC_WORD_LEN_MASK 0x30
+#define AD1836_ADC_SERFMT_MASK (7 << 6)
+#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
+#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
+
+#define AD1836_ADC_CTRL3 14
+
+#define AD1836_NUM_REGS 16
+
+extern struct snd_soc_dai ad1836_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ad1836;
+#endif
diff --git a/sound/soc/codecs/ad1938.c b/sound/soc/codecs/ad1938.c
new file mode 100644
index 0000000..e62b277
--- /dev/null
+++ b/sound/soc/codecs/ad1938.c
@@ -0,0 +1,682 @@
+/*
+ * File: sound/soc/codecs/ad1938.c
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: June 04 2009
+ * Description: Driver for AD1938 sound chip
+ *
+ * Modified:
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/soc-dapm.h>
+#include <linux/spi/spi.h>
+#include "ad1938.h"
+
+/* codec private data */
+struct ad1938_priv {
+ struct snd_soc_codec codec;
+ u8 reg_cache[AD1938_NUM_REGS];
+};
+
+static struct snd_soc_codec *ad1938_codec;
+struct snd_soc_codec_device soc_codec_dev_ad1938;
+static int ad1938_register(struct ad1938_priv *ad1938);
+static void ad1938_unregister(struct ad1938_priv *ad1938);
+
+/*
+ * AD1938 volume/mute/de-emphasis etc. controls
+ */
+static const char *ad1938_deemp[] = {"None", "48kHz", "44.1kHz", "32kHz"};
+
+static const struct soc_enum ad1938_deemp_enum =
+ SOC_ENUM_SINGLE(AD1938_DAC_CTRL2, 1, 4, ad1938_deemp);
+
+static const struct snd_kcontrol_new ad1938_snd_controls[] = {
+ /* DAC volume control */
+ SOC_DOUBLE_R("DAC1 Volume", AD1938_DAC_L1_VOL,
+ AD1938_DAC_R1_VOL, 0, 0xFF, 1),
+ SOC_DOUBLE_R("DAC2 Volume", AD1938_DAC_L2_VOL,
+ AD1938_DAC_R2_VOL, 0, 0xFF, 1),
+ SOC_DOUBLE_R("DAC3 Volume", AD1938_DAC_L3_VOL,
+ AD1938_DAC_R3_VOL, 0, 0xFF, 1),
+ SOC_DOUBLE_R("DAC4 Volume", AD1938_DAC_L4_VOL,
+ AD1938_DAC_R4_VOL, 0, 0xFF, 1),
+
+ /* ADC switch control */
+ SOC_DOUBLE("ADC1 Switch", AD1938_ADC_CTRL0, AD1938_ADCL1_MUTE,
+ AD1938_ADCR1_MUTE, 1, 1),
+ SOC_DOUBLE("ADC2 Switch", AD1938_ADC_CTRL0, AD1938_ADCL2_MUTE,
+ AD1938_ADCR2_MUTE, 1, 1),
+
+ /* DAC switch control */
+ SOC_DOUBLE("DAC1 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL1_MUTE,
+ AD1938_DACR1_MUTE, 1, 1),
+ SOC_DOUBLE("DAC2 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL2_MUTE,
+ AD1938_DACR2_MUTE, 1, 1),
+ SOC_DOUBLE("DAC3 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL3_MUTE,
+ AD1938_DACR3_MUTE, 1, 1),
+ SOC_DOUBLE("DAC4 Switch", AD1938_DAC_CHNL_MUTE, AD1938_DACL4_MUTE,
+ AD1938_DACR4_MUTE, 1, 1),
+
+ /* ADC high-pass filter */
+ SOC_SINGLE("ADC High Pass Filter Switch", AD1938_ADC_CTRL0,
+ AD1938_ADC_HIGHPASS_FILTER, 1, 0),
+
+ /* DAC de-emphasis */
+ SOC_ENUM("Playback Deemphasis", ad1938_deemp_enum),
+};
+
+static const struct snd_soc_dapm_widget ad1938_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("DAC", "Playback", AD1938_DAC_CTRL0, 0, 1),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SUPPLY("ADC_PWR", AD1938_ADC_CTRL0, 0, 1, NULL, 0),
+ SND_SOC_DAPM_OUTPUT("DAC1OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC2OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC3OUT"),
+ SND_SOC_DAPM_OUTPUT("DAC4OUT"),
+ SND_SOC_DAPM_INPUT("ADC1IN"),
+ SND_SOC_DAPM_INPUT("ADC2IN"),
+};
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DAC", NULL, "ADC_PWR" },
+ { "ADC", NULL, "ADC_PWR" },
+ { "DAC1OUT", "DAC1 Switch", "DAC" },
+ { "DAC2OUT", "DAC2 Switch", "DAC" },
+ { "DAC3OUT", "DAC3 Switch", "DAC" },
+ { "DAC4OUT", "DAC4 Switch", "DAC" },
+ { "ADC", "ADC1 Switch", "ADC1IN" },
+ { "ADC", "ADC2 Switch", "ADC2IN" },
+};
+
+/*
+ * DAI ops entries
+ */
+
+static int ad1938_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int reg;
+
+ reg = codec->read(codec, AD1938_DAC_CTRL2);
+ reg = (mute > 0) ? reg | AD1938_DAC_MASTER_MUTE : reg &
+ (~AD1938_DAC_MASTER_MUTE);
+ codec->write(codec, AD1938_DAC_CTRL2, reg);
+
+ return 0;
+}
+
+static inline int ad1938_pll_powerctrl(struct snd_soc_codec *codec, int cmd)
+{
+ int reg = codec->read(codec, AD1938_PLL_CLK_CTRL0);
+ reg = (cmd > 0) ? reg & (~AD1938_PLL_POWERDOWN) : reg |
+ AD1938_PLL_POWERDOWN;
+ codec->write(codec, AD1938_PLL_CLK_CTRL0, reg);
+
+ return 0;
+}
+
+static int ad1938_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int mask, int slots, int width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int dac_reg = codec->read(codec, AD1938_DAC_CTRL1);
+ int adc_reg = codec->read(codec, AD1938_ADC_CTRL2);
+
+ dac_reg &= ~AD1938_DAC_CHAN_MASK;
+ adc_reg &= ~AD1938_ADC_CHAN_MASK;
+
+ switch (slots) {
+ case 2:
+ dac_reg |= AD1938_DAC_2_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_2_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ case 4:
+ dac_reg |= AD1938_DAC_4_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_4_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ case 8:
+ dac_reg |= AD1938_DAC_8_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_8_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ case 16:
+ dac_reg |= AD1938_DAC_16_CHANNELS << AD1938_DAC_CHAN_SHFT;
+ adc_reg |= AD1938_ADC_16_CHANNELS << AD1938_ADC_CHAN_SHFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ codec->write(codec, AD1938_DAC_CTRL1, dac_reg);
+ codec->write(codec, AD1938_ADC_CTRL2, adc_reg);
+
+ return 0;
+}
+
+static int ad1938_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int adc_reg, dac_reg;
+
+ adc_reg = codec->read(codec, AD1938_ADC_CTRL2);
+ dac_reg = codec->read(codec, AD1938_DAC_CTRL1);
+
+ /* At present, the driver only support AUX ADC mode(SND_SOC_DAIFMT_I2S
+ * with TDM) and ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A)
+ */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ adc_reg &= ~AD1938_ADC_SERFMT_MASK;
+ adc_reg |= AD1938_ADC_SERFMT_TDM;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ adc_reg &= ~AD1938_ADC_SERFMT_MASK;
+ adc_reg |= AD1938_ADC_SERFMT_AUX;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF: /* normal bit clock + frame */
+ adc_reg &= ~AD1938_ADC_LEFT_HIGH;
+ adc_reg &= ~AD1938_ADC_BCLK_INV;
+ dac_reg &= ~AD1938_DAC_LEFT_HIGH;
+ dac_reg &= ~AD1938_DAC_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF: /* normal bclk + invert frm */
+ adc_reg |= AD1938_ADC_LEFT_HIGH;
+ adc_reg &= ~AD1938_ADC_BCLK_INV;
+ dac_reg |= AD1938_DAC_LEFT_HIGH;
+ dac_reg &= ~AD1938_DAC_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF: /* invert bclk + normal frm */
+ adc_reg &= ~AD1938_ADC_LEFT_HIGH;
+ adc_reg |= AD1938_ADC_BCLK_INV;
+ dac_reg &= ~AD1938_DAC_LEFT_HIGH;
+ dac_reg |= AD1938_DAC_BCLK_INV;
+ break;
+
+ case SND_SOC_DAIFMT_IB_IF: /* invert bclk + frm */
+ adc_reg |= AD1938_ADC_LEFT_HIGH;
+ adc_reg |= AD1938_ADC_BCLK_INV;
+ dac_reg |= AD1938_DAC_LEFT_HIGH;
+ dac_reg |= AD1938_DAC_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM: /* codec clk & frm master */
+ adc_reg |= AD1938_ADC_LCR_MASTER;
+ adc_reg |= AD1938_ADC_BCLK_MASTER;
+ dac_reg |= AD1938_DAC_LCR_MASTER;
+ dac_reg |= AD1938_DAC_BCLK_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM: /* codec clk slave & frm master */
+ adc_reg |= AD1938_ADC_LCR_MASTER;
+ adc_reg &= ~AD1938_ADC_BCLK_MASTER;
+ dac_reg |= AD1938_DAC_LCR_MASTER;
+ dac_reg &= ~AD1938_DAC_BCLK_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS: /* codec clk master & frame slave */
+ adc_reg &= ~AD1938_ADC_LCR_MASTER;
+ adc_reg |= AD1938_ADC_BCLK_MASTER;
+ dac_reg &= ~AD1938_DAC_LCR_MASTER;
+ dac_reg |= AD1938_DAC_BCLK_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS: /* codec clk & frm slave */
+ adc_reg &= ~AD1938_ADC_LCR_MASTER;
+ adc_reg &= ~AD1938_ADC_BCLK_MASTER;
+ dac_reg &= ~AD1938_DAC_LCR_MASTER;
+ dac_reg &= ~AD1938_DAC_BCLK_MASTER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ codec->write(codec, AD1938_ADC_CTRL2, adc_reg);
+ codec->write(codec, AD1938_DAC_CTRL1, dac_reg);
+
+ return 0;
+}
+
+static int ad1938_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int word_len = 0, reg = 0;
+
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ word_len = 3;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ word_len = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ case SNDRV_PCM_FORMAT_S32_LE:
+ word_len = 0;
+ break;
+ }
+
+ reg = codec->read(codec, AD1938_DAC_CTRL2);
+ reg = (reg & (~AD1938_DAC_WORD_LEN_MASK)) | word_len;
+ codec->write(codec, AD1938_DAC_CTRL2, reg);
+
+ reg = codec->read(codec, AD1938_ADC_CTRL1);
+ reg = (reg & (~AD1938_ADC_WORD_LEN_MASK)) | word_len;
+ codec->write(codec, AD1938_ADC_CTRL1, reg);
+
+ return 0;
+}
+
+static int ad1938_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ ad1938_pll_powerctrl(codec, 1);
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ case SND_SOC_BIAS_OFF:
+ ad1938_pll_powerctrl(codec, 0);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+/*
+ * interface to read/write ad1938 register
+ */
+
+#define AD1938_SPI_ADDR 0x4
+#define AD1938_SPI_READ 0x1
+#define AD1938_SPI_BUFLEN 3
+
+/*
+ * write to the ad1938 register space
+ */
+
+static int ad1938_write_reg(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 *reg_cache = codec->reg_cache;
+ int ret = 0;
+
+ if (value != reg_cache[reg]) {
+ uint8_t buf[AD1938_SPI_BUFLEN];
+ struct spi_transfer t = {
+ .tx_buf = buf,
+ .len = AD1938_SPI_BUFLEN,
+ };
+ struct spi_message m;
+
+ buf[0] = AD1938_SPI_ADDR << 1;
+ buf[1] = reg;
+ buf[2] = value;
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(codec->control_data, &m);
+ if (ret == 0)
+ reg_cache[reg] = value;
+ }
+
+ return ret;
+}
+
+/*
+ * read from the ad1938 register space cache
+ */
+
+static unsigned int ad1938_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u8 *reg_cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ return reg_cache[reg];
+}
+
+/*
+ * read from the ad1938 register space
+ */
+
+static unsigned int ad1938_read_reg(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ char w_buf[AD1938_SPI_BUFLEN];
+ char r_buf[AD1938_SPI_BUFLEN];
+ int ret;
+
+ struct spi_transfer t = {
+ .tx_buf = w_buf,
+ .rx_buf = r_buf,
+ .len = AD1938_SPI_BUFLEN,
+ };
+ struct spi_message m;
+
+ w_buf[0] = (AD1938_SPI_ADDR << 1) | AD1938_SPI_READ;
+ w_buf[1] = reg;
+ w_buf[2] = 0;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(codec->control_data, &m);
+ if (ret == 0)
+ return r_buf[2];
+ else
+ return -EIO;
+}
+
+static int ad1938_fill_cache(struct snd_soc_codec *codec)
+{
+ int i;
+ u8 *reg_cache = codec->reg_cache;
+ struct spi_device *spi = codec->control_data;
+
+ for (i = 0; i < codec->reg_cache_size; i++) {
+ int ret = ad1938_read_reg(codec, i);
+ if (ret == -EIO) {
+ dev_err(&spi->dev, "AD1938 SPI read failure\n");
+ return ret;
+ }
+ reg_cache[i] = ret;
+ }
+
+ return 0;
+}
+
+static int __devinit ad1938_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_codec *codec;
+ struct ad1938_priv *ad1938;
+
+ ad1938 = kzalloc(sizeof(struct ad1938_priv), GFP_KERNEL);
+ if (ad1938 == NULL)
+ return -ENOMEM;
+
+ codec = &ad1938->codec;
+ codec->control_data = spi;
+ codec->dev = &spi->dev;
+
+ dev_set_drvdata(&spi->dev, ad1938);
+
+ return ad1938_register(ad1938);
+}
+
+static int __devexit ad1938_spi_remove(struct spi_device *spi)
+{
+ struct ad1938_priv *ad1938 = dev_get_drvdata(&spi->dev);
+
+ ad1938_unregister(ad1938);
+ return 0;
+}
+
+static struct spi_driver ad1938_spi_driver = {
+ .driver = {
+ .name = "ad1938",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad1938_spi_probe,
+ .remove = __devexit_p(ad1938_spi_remove),
+};
+
+static struct snd_soc_dai_ops ad1938_dai_ops = {
+ .hw_params = ad1938_hw_params,
+ .digital_mute = ad1938_mute,
+ .set_tdm_slot = ad1938_set_tdm_slot,
+ .set_fmt = ad1938_set_dai_fmt,
+};
+
+/* codec DAI instance */
+struct snd_soc_dai ad1938_dai = {
+ .name = "AD1938",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 4,
+ .rates = SNDRV_PCM_RATE_48000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+ .ops = &ad1938_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ad1938_dai);
+
+static int ad1938_register(struct ad1938_priv *ad1938)
+{
+ int ret;
+ struct snd_soc_codec *codec = &ad1938->codec;
+
+ if (ad1938_codec) {
+ dev_err(codec->dev, "Another ad1938 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+ codec->private_data = ad1938;
+ codec->reg_cache = ad1938->reg_cache;
+ codec->reg_cache_size = AD1938_NUM_REGS;
+ codec->name = "AD1938";
+ codec->owner = THIS_MODULE;
+ codec->dai = &ad1938_dai;
+ codec->num_dai = 1;
+ codec->write = ad1938_write_reg;
+ codec->read = ad1938_read_reg_cache;
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ ad1938_dai.dev = codec->dev;
+ ad1938_codec = codec;
+
+ /* default setting for ad1938 */
+
+ /* unmute dac channels */
+ codec->write(codec, AD1938_DAC_CHNL_MUTE, 0x0);
+ /* de-emphasis: 48kHz, powedown dac */
+ codec->write(codec, AD1938_DAC_CTRL2, 0x1A);
+ /* powerdown dac, dac in tdm mode */
+ codec->write(codec, AD1938_DAC_CTRL0, 0x41);
+ /* high-pass filter enable */
+ codec->write(codec, AD1938_ADC_CTRL0, 0x3);
+ /* sata delay=1, adc aux mode */
+ codec->write(codec, AD1938_ADC_CTRL1, 0x43);
+ /* pll input: mclki/xi */
+ codec->write(codec, AD1938_PLL_CLK_CTRL0, 0x9D);
+ codec->write(codec, AD1938_PLL_CLK_CTRL1, 0x04);
+
+ ad1938_fill_cache(codec);
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ kfree(ad1938);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&ad1938_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ kfree(ad1938);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ad1938_unregister(struct ad1938_priv *ad1938)
+{
+ ad1938_set_bias_level(&ad1938->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&ad1938_dai);
+ snd_soc_unregister_codec(&ad1938->codec);
+ kfree(ad1938);
+ ad1938_codec = NULL;
+}
+
+static int ad1938_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (ad1938_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = ad1938_codec;
+ codec = ad1938_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, ad1938_snd_controls,
+ ARRAY_SIZE(ad1938_snd_controls));
+ snd_soc_dapm_new_controls(codec, ad1938_dapm_widgets,
+ ARRAY_SIZE(ad1938_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+ snd_soc_dapm_new_widgets(codec);
+
+ ad1938_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int ad1938_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ad1938_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ ad1938_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int ad1938_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
+ ad1938_set_bias_level(codec, SND_SOC_BIAS_ON);
+
+ return 0;
+}
+#else
+#define ad1938_suspend NULL
+#define ad1938_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_ad1938 = {
+ .probe = ad1938_probe,
+ .remove = ad1938_remove,
+ .suspend = ad1938_suspend,
+ .resume = ad1938_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ad1938);
+
+static int __init ad1938_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&ad1938_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register ad1938 SPI driver: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+module_init(ad1938_init);
+
+static void __exit ad1938_exit(void)
+{
+ spi_unregister_driver(&ad1938_spi_driver);
+}
+module_exit(ad1938_exit);
+
+MODULE_DESCRIPTION("ASoC ad1938 driver");
+MODULE_AUTHOR("Barry Song ");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ad1938.h b/sound/soc/codecs/ad1938.h
new file mode 100644
index 0000000..fe3c48c
--- /dev/null
+++ b/sound/soc/codecs/ad1938.h
@@ -0,0 +1,100 @@
+/*
+ * File: sound/soc/codecs/ad1836.h
+ * Based on:
+ * Author: Barry Song <Barry.Song@analog.com>
+ *
+ * Created: May 25, 2009
+ * Description: definitions for AD1938 registers
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AD1938_H__
+#define __AD1938_H__
+
+#define AD1938_PLL_CLK_CTRL0 0
+#define AD1938_PLL_POWERDOWN 0x01
+#define AD1938_PLL_CLK_CTRL1 1
+#define AD1938_DAC_CTRL0 2
+#define AD1938_DAC_POWERDOWN 0x01
+#define AD1938_DAC_SERFMT_MASK 0xC0
+#define AD1938_DAC_SERFMT_STEREO (0 << 6)
+#define AD1938_DAC_SERFMT_TDM (1 << 6)
+#define AD1938_DAC_CTRL1 3
+#define AD1938_DAC_2_CHANNELS 0
+#define AD1938_DAC_4_CHANNELS 1
+#define AD1938_DAC_8_CHANNELS 2
+#define AD1938_DAC_16_CHANNELS 3
+#define AD1938_DAC_CHAN_SHFT 1
+#define AD1938_DAC_CHAN_MASK (3 << AD1938_DAC_CHAN_SHFT)
+#define AD1938_DAC_LCR_MASTER (1 << 4)
+#define AD1938_DAC_BCLK_MASTER (1 << 5)
+#define AD1938_DAC_LEFT_HIGH (1 << 3)
+#define AD1938_DAC_BCLK_INV (1 << 7)
+#define AD1938_DAC_CTRL2 4
+#define AD1938_DAC_WORD_LEN_MASK 0xC
+#define AD1938_DAC_MASTER_MUTE 1
+#define AD1938_DAC_CHNL_MUTE 5
+#define AD1938_DACL1_MUTE 0
+#define AD1938_DACR1_MUTE 1
+#define AD1938_DACL2_MUTE 2
+#define AD1938_DACR2_MUTE 3
+#define AD1938_DACL3_MUTE 4
+#define AD1938_DACR3_MUTE 5
+#define AD1938_DACL4_MUTE 6
+#define AD1938_DACR4_MUTE 7
+#define AD1938_DAC_L1_VOL 6
+#define AD1938_DAC_R1_VOL 7
+#define AD1938_DAC_L2_VOL 8
+#define AD1938_DAC_R2_VOL 9
+#define AD1938_DAC_L3_VOL 10
+#define AD1938_DAC_R3_VOL 11
+#define AD1938_DAC_L4_VOL 12
+#define AD1938_DAC_R4_VOL 13
+#define AD1938_ADC_CTRL0 14
+#define AD1938_ADC_POWERDOWN 0x01
+#define AD1938_ADC_HIGHPASS_FILTER 1
+#define AD1938_ADCL1_MUTE 2
+#define AD1938_ADCR1_MUTE 3
+#define AD1938_ADCL2_MUTE 4
+#define AD1938_ADCR2_MUTE 5
+#define AD1938_ADC_CTRL1 15
+#define AD1938_ADC_SERFMT_MASK 0x60
+#define AD1938_ADC_SERFMT_STEREO (0 << 5)
+#define AD1938_ADC_SERFMT_TDM (1 << 2)
+#define AD1938_ADC_SERFMT_AUX (2 << 5)
+#define AD1938_ADC_WORD_LEN_MASK 0x3
+#define AD1938_ADC_CTRL2 16
+#define AD1938_ADC_2_CHANNELS 0
+#define AD1938_ADC_4_CHANNELS 1
+#define AD1938_ADC_8_CHANNELS 2
+#define AD1938_ADC_16_CHANNELS 3
+#define AD1938_ADC_CHAN_SHFT 4
+#define AD1938_ADC_CHAN_MASK (3 << AD1938_ADC_CHAN_SHFT)
+#define AD1938_ADC_LCR_MASTER (1 << 3)
+#define AD1938_ADC_BCLK_MASTER (1 << 6)
+#define AD1938_ADC_LEFT_HIGH (1 << 2)
+#define AD1938_ADC_BCLK_INV (1 << 1)
+
+#define AD1938_NUM_REGS 17
+
+extern struct snd_soc_dai ad1938_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ad1938;
+#endif
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index dd33802..0abec0d 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -59,21 +59,6 @@
return cache[reg];
}
-static inline unsigned int ak4535_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u8 data;
- data = reg;
-
- if (codec->hw_write(codec->control_data, &data, 1) != 1)
- return -EIO;
-
- if (codec->hw_read(codec->control_data, &data, 1) != 1)
- return -EIO;
-
- return data;
-};
-
/*
* write ak4535 register cache
*/
@@ -635,7 +620,6 @@
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
codec->hw_write = (hw_write_t)i2c_master_send;
- codec->hw_read = (hw_read_t)i2c_master_recv;
ret = ak4535_add_i2c_device(pdev, setup);
}
#endif
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
new file mode 100644
index 0000000..e057c7b
--- /dev/null
+++ b/sound/soc/codecs/ak4642.c
@@ -0,0 +1,502 @@
+/*
+ * ak4642.c -- AK4642/AK4643 ALSA Soc Audio driver
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on wm8731.c by Richard Purdie
+ * Based on ak4535.c by Richard Purdie
+ * Based on wm8753.c by Liam Girdwood
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* ** CAUTION **
+ *
+ * This is very simple driver.
+ * It can use headphone output / stereo input only
+ *
+ * AK4642 is not tested.
+ * AK4643 is tested.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "ak4642.h"
+
+#define AK4642_VERSION "0.0.1"
+
+#define PW_MGMT1 0x00
+#define PW_MGMT2 0x01
+#define SG_SL1 0x02
+#define SG_SL2 0x03
+#define MD_CTL1 0x04
+#define MD_CTL2 0x05
+#define TIMER 0x06
+#define ALC_CTL1 0x07
+#define ALC_CTL2 0x08
+#define L_IVC 0x09
+#define L_DVC 0x0a
+#define ALC_CTL3 0x0b
+#define R_IVC 0x0c
+#define R_DVC 0x0d
+#define MD_CTL3 0x0e
+#define MD_CTL4 0x0f
+#define PW_MGMT3 0x10
+#define DF_S 0x11
+#define FIL3_0 0x12
+#define FIL3_1 0x13
+#define FIL3_2 0x14
+#define FIL3_3 0x15
+#define EQ_0 0x16
+#define EQ_1 0x17
+#define EQ_2 0x18
+#define EQ_3 0x19
+#define EQ_4 0x1a
+#define EQ_5 0x1b
+#define FIL1_0 0x1c
+#define FIL1_1 0x1d
+#define FIL1_2 0x1e
+#define FIL1_3 0x1f
+#define PW_MGMT4 0x20
+#define MD_CTL5 0x21
+#define LO_MS 0x22
+#define HP_MS 0x23
+#define SPK_MS 0x24
+
+#define AK4642_CACHEREGNUM 0x25
+
+struct snd_soc_codec_device soc_codec_dev_ak4642;
+
+/* codec private data */
+struct ak4642_priv {
+ struct snd_soc_codec codec;
+ unsigned int sysclk;
+};
+
+static struct snd_soc_codec *ak4642_codec;
+
+/*
+ * ak4642 register cache
+ */
+static const u16 ak4642_reg[AK4642_CACHEREGNUM] = {
+ 0x0000, 0x0000, 0x0001, 0x0000,
+ 0x0002, 0x0000, 0x0000, 0x0000,
+ 0x00e1, 0x00e1, 0x0018, 0x0000,
+ 0x00e1, 0x0018, 0x0011, 0x0008,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000,
+};
+
+/*
+ * read ak4642 register cache
+ */
+static inline unsigned int ak4642_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= AK4642_CACHEREGNUM)
+ return -1;
+ return cache[reg];
+}
+
+/*
+ * write ak4642 register cache
+ */
+static inline void ak4642_write_reg_cache(struct snd_soc_codec *codec,
+ u16 reg, unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= AK4642_CACHEREGNUM)
+ return;
+
+ cache[reg] = value;
+}
+
+/*
+ * write to the AK4642 register space
+ */
+static int ak4642_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 data[2];
+
+ /* data is
+ * D15..D8 AK4642 register offset
+ * D7...D0 register data
+ */
+ data[0] = reg & 0xff;
+ data[1] = value & 0xff;
+
+ if (codec->hw_write(codec->control_data, data, 2) == 2) {
+ ak4642_write_reg_cache(codec, reg, value);
+ return 0;
+ } else
+ return -EIO;
+}
+
+static int ak4642_sync(struct snd_soc_codec *codec)
+{
+ u16 *cache = codec->reg_cache;
+ int i, r = 0;
+
+ for (i = 0; i < AK4642_CACHEREGNUM; i++)
+ r |= ak4642_write(codec, i, cache[i]);
+
+ return r;
+};
+
+static int ak4642_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ struct snd_soc_codec *codec = dai->codec;
+
+ if (is_play) {
+ /*
+ * start headphone output
+ *
+ * PLL, Master Mode
+ * Audio I/F Format :MSB justified (ADC & DAC)
+ * Sampling Frequency: 44.1kHz
+ * Digital Volume: −8dB
+ * Bass Boost Level : Middle
+ *
+ * This operation came from example code of
+ * "ASAHI KASEI AK4642" (japanese) manual p97.
+ *
+ * Example code use 0x39, 0x79 value for 0x01 address,
+ * But we need MCKO (0x02) bit now
+ */
+ ak4642_write(codec, 0x05, 0x27);
+ ak4642_write(codec, 0x0f, 0x09);
+ ak4642_write(codec, 0x0e, 0x19);
+ ak4642_write(codec, 0x09, 0x91);
+ ak4642_write(codec, 0x0c, 0x91);
+ ak4642_write(codec, 0x0a, 0x28);
+ ak4642_write(codec, 0x0d, 0x28);
+ ak4642_write(codec, 0x00, 0x64);
+ ak4642_write(codec, 0x01, 0x3b); /* + MCKO bit */
+ ak4642_write(codec, 0x01, 0x7b); /* + MCKO bit */
+ } else {
+ /*
+ * start stereo input
+ *
+ * PLL Master Mode
+ * Audio I/F Format:MSB justified (ADC & DAC)
+ * Sampling Frequency:44.1kHz
+ * Pre MIC AMP:+20dB
+ * MIC Power On
+ * ALC setting:Refer to Table 35
+ * ALC bit=“1”
+ *
+ * This operation came from example code of
+ * "ASAHI KASEI AK4642" (japanese) manual p94.
+ */
+ ak4642_write(codec, 0x05, 0x27);
+ ak4642_write(codec, 0x02, 0x05);
+ ak4642_write(codec, 0x06, 0x3c);
+ ak4642_write(codec, 0x08, 0xe1);
+ ak4642_write(codec, 0x0b, 0x00);
+ ak4642_write(codec, 0x07, 0x21);
+ ak4642_write(codec, 0x00, 0x41);
+ ak4642_write(codec, 0x10, 0x01);
+ }
+
+ return 0;
+}
+
+static void ak4642_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ struct snd_soc_codec *codec = dai->codec;
+
+ if (is_play) {
+ /* stop headphone output */
+ ak4642_write(codec, 0x01, 0x3b);
+ ak4642_write(codec, 0x01, 0x0b);
+ ak4642_write(codec, 0x00, 0x40);
+ ak4642_write(codec, 0x0e, 0x11);
+ ak4642_write(codec, 0x0f, 0x08);
+ } else {
+ /* stop stereo input */
+ ak4642_write(codec, 0x00, 0x40);
+ ak4642_write(codec, 0x10, 0x00);
+ ak4642_write(codec, 0x07, 0x01);
+ }
+}
+
+static int ak4642_dai_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct ak4642_priv *ak4642 = codec->private_data;
+
+ ak4642->sysclk = freq;
+ return 0;
+}
+
+static struct snd_soc_dai_ops ak4642_dai_ops = {
+ .startup = ak4642_dai_startup,
+ .shutdown = ak4642_dai_shutdown,
+ .set_sysclk = ak4642_dai_set_sysclk,
+};
+
+struct snd_soc_dai ak4642_dai = {
+ .name = "AK4642",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE },
+ .ops = &ak4642_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ak4642_dai);
+
+static int ak4642_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ ak4642_sync(codec);
+ return 0;
+}
+
+/*
+ * initialise the AK4642 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int ak4642_init(struct ak4642_priv *ak4642)
+{
+ struct snd_soc_codec *codec = &ak4642->codec;
+ int ret = 0;
+
+ if (ak4642_codec) {
+ dev_err(codec->dev, "Another ak4642 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = ak4642;
+ codec->name = "AK4642";
+ codec->owner = THIS_MODULE;
+ codec->read = ak4642_read_reg_cache;
+ codec->write = ak4642_write;
+ codec->dai = &ak4642_dai;
+ codec->num_dai = 1;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->reg_cache_size = ARRAY_SIZE(ak4642_reg);
+ codec->reg_cache = kmemdup(ak4642_reg,
+ sizeof(ak4642_reg), GFP_KERNEL);
+
+ if (!codec->reg_cache)
+ return -ENOMEM;
+
+ ak4642_dai.dev = codec->dev;
+ ak4642_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto reg_cache_err;
+ }
+
+ ret = snd_soc_register_dai(&ak4642_dai);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ goto reg_cache_err;
+ }
+
+ /*
+ * clock setting
+ *
+ * Audio I/F Format: MSB justified (ADC & DAC)
+ * BICK frequency at Master Mode: 64fs
+ * Input Master Clock Select at PLL Mode: 11.2896MHz
+ * MCKO: Enable
+ * Sampling Frequency: 44.1kHz
+ *
+ * This operation came from example code of
+ * "ASAHI KASEI AK4642" (japanese) manual p89.
+ *
+ * please fix-me
+ */
+ ak4642_write(codec, 0x01, 0x08);
+ ak4642_write(codec, 0x04, 0x4a);
+ ak4642_write(codec, 0x05, 0x27);
+ ak4642_write(codec, 0x00, 0x40);
+ ak4642_write(codec, 0x01, 0x0b);
+
+ return ret;
+
+reg_cache_err:
+ kfree(codec->reg_cache);
+ codec->reg_cache = NULL;
+
+ return ret;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static int ak4642_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct ak4642_priv *ak4642;
+ struct snd_soc_codec *codec;
+ int ret;
+
+ ak4642 = kzalloc(sizeof(struct ak4642_priv), GFP_KERNEL);
+ if (!ak4642)
+ return -ENOMEM;
+
+ codec = &ak4642->codec;
+ codec->dev = &i2c->dev;
+
+ i2c_set_clientdata(i2c, ak4642);
+ codec->control_data = i2c;
+
+ ret = ak4642_init(ak4642);
+ if (ret < 0)
+ printk(KERN_ERR "failed to initialise AK4642\n");
+
+ return ret;
+}
+
+static int ak4642_i2c_remove(struct i2c_client *client)
+{
+ struct ak4642_priv *ak4642 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_dai(&ak4642_dai);
+ snd_soc_unregister_codec(&ak4642->codec);
+ kfree(ak4642->codec.reg_cache);
+ kfree(ak4642);
+ ak4642_codec = NULL;
+
+ return 0;
+}
+
+static const struct i2c_device_id ak4642_i2c_id[] = {
+ { "ak4642", 0 },
+ { "ak4643", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ak4642_i2c_id);
+
+static struct i2c_driver ak4642_i2c_driver = {
+ .driver = {
+ .name = "AK4642 I2C Codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = ak4642_i2c_probe,
+ .remove = ak4642_i2c_remove,
+ .id_table = ak4642_i2c_id,
+};
+
+#endif
+
+static int ak4642_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ int ret;
+
+ if (!ak4642_codec) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = ak4642_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "ak4642: failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "ak4642: failed to register card\n");
+ goto card_err;
+ }
+
+ dev_info(&pdev->dev, "AK4642 Audio Codec %s", AK4642_VERSION);
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+
+}
+
+/* power down chip */
+static int ak4642_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ak4642 = {
+ .probe = ak4642_probe,
+ .remove = ak4642_remove,
+ .resume = ak4642_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ak4642);
+
+static int __init ak4642_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&ak4642_i2c_driver);
+#endif
+ return ret;
+
+}
+module_init(ak4642_modinit);
+
+static void __exit ak4642_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&ak4642_i2c_driver);
+#endif
+
+}
+module_exit(ak4642_exit);
+
+MODULE_DESCRIPTION("Soc AK4642 driver");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ak4642.h b/sound/soc/codecs/ak4642.h
new file mode 100644
index 0000000..e476833
--- /dev/null
+++ b/sound/soc/codecs/ak4642.h
@@ -0,0 +1,20 @@
+/*
+ * ak4642.h -- AK4642 Soc Audio driver
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ak4535.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _AK4642_H
+#define _AK4642_H
+
+extern struct snd_soc_dai ak4642_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ak4642;
+
+#endif
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index a32b822..ca1e24a 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -806,15 +806,30 @@
{
struct cs4270_private *cs4270 = i2c_get_clientdata(client);
struct snd_soc_codec *codec = &cs4270->codec;
- int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
- return snd_soc_write(codec, CS4270_PWRCTL, reg);
+ return snd_soc_suspend_device(codec->dev);
}
static int cs4270_i2c_resume(struct i2c_client *client)
{
struct cs4270_private *cs4270 = i2c_get_clientdata(client);
struct snd_soc_codec *codec = &cs4270->codec;
+
+ return snd_soc_resume_device(codec->dev);
+}
+
+static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct snd_soc_codec *codec = cs4270_codec;
+ int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+
+ return snd_soc_write(codec, CS4270_PWRCTL, reg);
+}
+
+static int cs4270_soc_resume(struct platform_device *pdev)
+{
+ struct snd_soc_codec *codec = cs4270_codec;
+ struct i2c_client *i2c_client = codec->control_data;
int reg;
/* In case the device was put to hard reset during sleep, we need to
@@ -825,7 +840,7 @@
for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
u8 val = snd_soc_read(codec, reg);
- if (i2c_smbus_write_byte_data(client, reg, val)) {
+ if (i2c_smbus_write_byte_data(i2c_client, reg, val)) {
dev_err(codec->dev, "i2c write failed\n");
return -EIO;
}
@@ -840,6 +855,8 @@
#else
#define cs4270_i2c_suspend NULL
#define cs4270_i2c_resume NULL
+#define cs4270_soc_suspend NULL
+#define cs4270_soc_resume NULL
#endif /* CONFIG_PM */
/*
@@ -868,7 +885,9 @@
*/
struct snd_soc_codec_device soc_codec_device_cs4270 = {
.probe = cs4270_probe,
- .remove = cs4270_remove
+ .remove = cs4270_remove,
+ .suspend = cs4270_soc_suspend,
+ .resume = cs4270_soc_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_device_cs4270);
diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c
new file mode 100644
index 0000000..38eac9c
--- /dev/null
+++ b/sound/soc/codecs/cx20442.c
@@ -0,0 +1,501 @@
+/*
+ * cx20442.c -- CX20442 ALSA Soc Audio driver
+ *
+ * Copyright 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * Initially based on sound/soc/codecs/wm8400.c
+ * Copyright 2008, 2009 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/tty.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/soc-dapm.h>
+
+#include "cx20442.h"
+
+
+struct cx20442_priv {
+ struct snd_soc_codec codec;
+ u8 reg_cache[1];
+};
+
+#define CX20442_PM 0x0
+
+#define CX20442_TELIN 0
+#define CX20442_TELOUT 1
+#define CX20442_MIC 2
+#define CX20442_SPKOUT 3
+#define CX20442_AGC 4
+
+static const struct snd_soc_dapm_widget cx20442_dapm_widgets[] = {
+ SND_SOC_DAPM_OUTPUT("TELOUT"),
+ SND_SOC_DAPM_OUTPUT("SPKOUT"),
+ SND_SOC_DAPM_OUTPUT("AGCOUT"),
+
+ SND_SOC_DAPM_MIXER("SPKOUT Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA("TELOUT Amp", CX20442_PM, CX20442_TELOUT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("SPKOUT Amp", CX20442_PM, CX20442_SPKOUT, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("SPKOUT AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0),
+
+ SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0),
+
+ SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_MICBIAS("TELIN Bias", CX20442_PM, CX20442_TELIN, 0),
+ SND_SOC_DAPM_MICBIAS("MIC Bias", CX20442_PM, CX20442_MIC, 0),
+
+ SND_SOC_DAPM_PGA("MIC AGC", CX20442_PM, CX20442_AGC, 0, NULL, 0),
+
+ SND_SOC_DAPM_INPUT("TELIN"),
+ SND_SOC_DAPM_INPUT("MIC"),
+ SND_SOC_DAPM_INPUT("AGCIN"),
+};
+
+static const struct snd_soc_dapm_route cx20442_audio_map[] = {
+ {"TELOUT", NULL, "TELOUT Amp"},
+
+ {"SPKOUT", NULL, "SPKOUT Mixer"},
+ {"SPKOUT Mixer", NULL, "SPKOUT Amp"},
+
+ {"TELOUT Amp", NULL, "DAC"},
+ {"SPKOUT Amp", NULL, "DAC"},
+
+ {"SPKOUT Mixer", NULL, "SPKOUT AGC"},
+ {"SPKOUT AGC", NULL, "AGCIN"},
+
+ {"AGCOUT", NULL, "MIC AGC"},
+ {"MIC AGC", NULL, "MIC"},
+
+ {"MIC Bias", NULL, "MIC"},
+ {"Input Mixer", NULL, "MIC Bias"},
+
+ {"TELIN Bias", NULL, "TELIN"},
+ {"Input Mixer", NULL, "TELIN Bias"},
+
+ {"ADC", NULL, "Input Mixer"},
+};
+
+static int cx20442_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, cx20442_dapm_widgets,
+ ARRAY_SIZE(cx20442_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, cx20442_audio_map,
+ ARRAY_SIZE(cx20442_audio_map));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+static unsigned int cx20442_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u8 *reg_cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ return reg_cache[reg];
+}
+
+enum v253_vls {
+ V253_VLS_NONE = 0,
+ V253_VLS_T,
+ V253_VLS_L,
+ V253_VLS_LT,
+ V253_VLS_S,
+ V253_VLS_ST,
+ V253_VLS_M,
+ V253_VLS_MST,
+ V253_VLS_S1,
+ V253_VLS_S1T,
+ V253_VLS_MS1T,
+ V253_VLS_M1,
+ V253_VLS_M1ST,
+ V253_VLS_M1S1T,
+ V253_VLS_H,
+ V253_VLS_HT,
+ V253_VLS_MS,
+ V253_VLS_MS1,
+ V253_VLS_M1S,
+ V253_VLS_M1S1,
+ V253_VLS_TEST,
+};
+
+static int cx20442_pm_to_v253_vls(u8 value)
+{
+ switch (value & ~(1 << CX20442_AGC)) {
+ case 0:
+ return V253_VLS_T;
+ case (1 << CX20442_SPKOUT):
+ case (1 << CX20442_MIC):
+ case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC):
+ return V253_VLS_M1S1;
+ case (1 << CX20442_TELOUT):
+ case (1 << CX20442_TELIN):
+ case (1 << CX20442_TELOUT) | (1 << CX20442_TELIN):
+ return V253_VLS_L;
+ case (1 << CX20442_TELOUT) | (1 << CX20442_MIC):
+ return V253_VLS_NONE;
+ }
+ return -EINVAL;
+}
+static int cx20442_pm_to_v253_vsp(u8 value)
+{
+ switch (value & ~(1 << CX20442_AGC)) {
+ case (1 << CX20442_SPKOUT):
+ case (1 << CX20442_MIC):
+ case (1 << CX20442_SPKOUT) | (1 << CX20442_MIC):
+ return (bool)(value & (1 << CX20442_AGC));
+ }
+ return (value & (1 << CX20442_AGC)) ? -EINVAL : 0;
+}
+
+static int cx20442_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 *reg_cache = codec->reg_cache;
+ int vls, vsp, old, len;
+ char buf[18];
+
+ if (reg >= codec->reg_cache_size)
+ return -EINVAL;
+
+ /* hw_write and control_data pointers required for talking to the modem
+ * are expected to be set by the line discipline initialization code */
+ if (!codec->hw_write || !codec->control_data)
+ return -EIO;
+
+ old = reg_cache[reg];
+ reg_cache[reg] = value;
+
+ vls = cx20442_pm_to_v253_vls(value);
+ if (vls < 0)
+ return vls;
+
+ vsp = cx20442_pm_to_v253_vsp(value);
+ if (vsp < 0)
+ return vsp;
+
+ if ((vls == V253_VLS_T) ||
+ (vls == cx20442_pm_to_v253_vls(old))) {
+ if (vsp == cx20442_pm_to_v253_vsp(old))
+ return 0;
+ len = snprintf(buf, ARRAY_SIZE(buf), "at+vsp=%d\r", vsp);
+ } else if (vsp == cx20442_pm_to_v253_vsp(old))
+ len = snprintf(buf, ARRAY_SIZE(buf), "at+vls=%d\r", vls);
+ else
+ len = snprintf(buf, ARRAY_SIZE(buf),
+ "at+vls=%d;+vsp=%d\r", vls, vsp);
+
+ if (unlikely(len > (ARRAY_SIZE(buf) - 1)))
+ return -ENOMEM;
+
+ dev_dbg(codec->dev, "%s: %s\n", __func__, buf);
+ if (codec->hw_write(codec->control_data, buf, len) != len)
+ return -EIO;
+
+ return 0;
+}
+
+
+/* Moved up here as line discipline referres it during initialization */
+static struct snd_soc_codec *cx20442_codec;
+
+
+/*
+ * Line discpline related code
+ *
+ * Any of the callback functions below can be used in two ways:
+ * 1) registerd by a machine driver as one of line discipline operations,
+ * 2) called from a machine's provided line discipline callback function
+ * in case when extra machine specific code must be run as well.
+ */
+
+/* Modem init: echo off, digital speaker off, quiet off, voice mode */
+static const char *v253_init = "ate0m0q0+fclass=8\r";
+
+/* Line discipline .open() */
+static int v253_open(struct tty_struct *tty)
+{
+ struct snd_soc_codec *codec = cx20442_codec;
+ int ret, len = strlen(v253_init);
+
+ /* Doesn't make sense without write callback */
+ if (!tty->ops->write)
+ return -EINVAL;
+
+ /* Pass the codec structure address for use by other ldisc callbacks */
+ tty->disc_data = codec;
+
+ if (tty->ops->write(tty, v253_init, len) != len) {
+ ret = -EIO;
+ goto err;
+ }
+ /* Actual setup will be performed after the modem responds. */
+ return 0;
+err:
+ tty->disc_data = NULL;
+ return ret;
+}
+
+/* Line discipline .close() */
+static void v253_close(struct tty_struct *tty)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+
+ tty->disc_data = NULL;
+
+ if (!codec)
+ return;
+
+ /* Prevent the codec driver from further accessing the modem */
+ codec->hw_write = NULL;
+ codec->control_data = NULL;
+ codec->pop_time = 0;
+}
+
+/* Line discipline .hangup() */
+static int v253_hangup(struct tty_struct *tty)
+{
+ v253_close(tty);
+ return 0;
+}
+
+/* Line discipline .receive_buf() */
+static void v253_receive(struct tty_struct *tty,
+ const unsigned char *cp, char *fp, int count)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+
+ if (!codec)
+ return;
+
+ if (!codec->control_data) {
+ /* First modem response, complete setup procedure */
+
+ /* Set up codec driver access to modem controls */
+ codec->control_data = tty;
+ codec->hw_write = (hw_write_t)tty->ops->write;
+ codec->pop_time = 1;
+ }
+}
+
+/* Line discipline .write_wakeup() */
+static void v253_wakeup(struct tty_struct *tty)
+{
+}
+
+struct tty_ldisc_ops v253_ops = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "cx20442",
+ .owner = THIS_MODULE,
+ .open = v253_open,
+ .close = v253_close,
+ .hangup = v253_hangup,
+ .receive_buf = v253_receive,
+ .write_wakeup = v253_wakeup,
+};
+EXPORT_SYMBOL_GPL(v253_ops);
+
+
+/*
+ * Codec DAI
+ */
+
+struct snd_soc_dai cx20442_dai = {
+ .name = "CX20442",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+};
+EXPORT_SYMBOL_GPL(cx20442_dai);
+
+static int cx20442_codec_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret;
+
+ if (!cx20442_codec) {
+ dev_err(&pdev->dev, "cx20442 not yet discovered\n");
+ return -ENODEV;
+ }
+ codec = cx20442_codec;
+
+ socdev->card->codec = codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ cx20442_add_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int cx20442_codec_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device cx20442_codec_dev = {
+ .probe = cx20442_codec_probe,
+ .remove = cx20442_codec_remove,
+};
+EXPORT_SYMBOL_GPL(cx20442_codec_dev);
+
+static int cx20442_register(struct cx20442_priv *cx20442)
+{
+ struct snd_soc_codec *codec = &cx20442->codec;
+ int ret;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->name = "CX20442";
+ codec->owner = THIS_MODULE;
+ codec->private_data = cx20442;
+
+ codec->dai = &cx20442_dai;
+ codec->num_dai = 1;
+
+ codec->reg_cache = &cx20442->reg_cache;
+ codec->reg_cache_size = ARRAY_SIZE(cx20442->reg_cache);
+ codec->read = cx20442_read_reg_cache;
+ codec->write = cx20442_write;
+
+ codec->bias_level = SND_SOC_BIAS_OFF;
+
+ cx20442_dai.dev = codec->dev;
+
+ cx20442_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&cx20442_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ cx20442_codec = NULL;
+ kfree(cx20442);
+ return ret;
+}
+
+static void cx20442_unregister(struct cx20442_priv *cx20442)
+{
+ snd_soc_unregister_dai(&cx20442_dai);
+ snd_soc_unregister_codec(&cx20442->codec);
+
+ cx20442_codec = NULL;
+ kfree(cx20442);
+}
+
+static int cx20442_platform_probe(struct platform_device *pdev)
+{
+ struct cx20442_priv *cx20442;
+ struct snd_soc_codec *codec;
+
+ cx20442 = kzalloc(sizeof(struct cx20442_priv), GFP_KERNEL);
+ if (cx20442 == NULL)
+ return -ENOMEM;
+
+ codec = &cx20442->codec;
+
+ codec->control_data = NULL;
+ codec->hw_write = NULL;
+ codec->pop_time = 0;
+
+ codec->dev = &pdev->dev;
+ platform_set_drvdata(pdev, cx20442);
+
+ return cx20442_register(cx20442);
+}
+
+static int __exit cx20442_platform_remove(struct platform_device *pdev)
+{
+ struct cx20442_priv *cx20442 = platform_get_drvdata(pdev);
+
+ cx20442_unregister(cx20442);
+ return 0;
+}
+
+static struct platform_driver cx20442_platform_driver = {
+ .driver = {
+ .name = "cx20442",
+ .owner = THIS_MODULE,
+ },
+ .probe = cx20442_platform_probe,
+ .remove = __exit_p(cx20442_platform_remove),
+};
+
+static int __init cx20442_init(void)
+{
+ return platform_driver_register(&cx20442_platform_driver);
+}
+module_init(cx20442_init);
+
+static void __exit cx20442_exit(void)
+{
+ platform_driver_unregister(&cx20442_platform_driver);
+}
+module_exit(cx20442_exit);
+
+MODULE_DESCRIPTION("ASoC CX20442-11 voice modem codec driver");
+MODULE_AUTHOR("Janusz Krzysztofik");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cx20442");
diff --git a/sound/soc/codecs/cx20442.h b/sound/soc/codecs/cx20442.h
new file mode 100644
index 0000000..688a5eb
--- /dev/null
+++ b/sound/soc/codecs/cx20442.h
@@ -0,0 +1,20 @@
+/*
+ * cx20442.h -- audio driver for CX20442
+ *
+ * Copyright 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _CX20442_CODEC_H
+#define _CX20442_CODEC_H
+
+extern struct snd_soc_dai cx20442_dai;
+extern struct snd_soc_codec_device cx20442_codec_dev;
+extern struct tty_ldisc_ops v253_ops;
+
+#endif
diff --git a/sound/soc/codecs/max9877.c b/sound/soc/codecs/max9877.c
new file mode 100644
index 0000000..9e7e964
--- /dev/null
+++ b/sound/soc/codecs/max9877.c
@@ -0,0 +1,308 @@
+/*
+ * max9877.c -- amp driver for max9877
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include "max9877.h"
+
+static struct i2c_client *i2c;
+
+static u8 max9877_regs[5] = { 0x40, 0x00, 0x00, 0x00, 0x49 };
+
+static void max9877_write_regs(void)
+{
+ unsigned int i;
+ u8 data[6];
+
+ data[0] = MAX9877_INPUT_MODE;
+ for (i = 0; i < ARRAY_SIZE(max9877_regs); i++)
+ data[i + 1] = max9877_regs[i];
+
+ if (i2c_master_send(i2c, data, 6) != 6)
+ dev_err(&i2c->dev, "i2c write failed\n");
+}
+
+static int max9877_get_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+ unsigned int invert = mc->invert;
+
+ ucontrol->value.integer.value[0] = (max9877_regs[reg] >> shift) & mask;
+
+ if (invert)
+ ucontrol->value.integer.value[0] =
+ mask - ucontrol->value.integer.value[0];
+
+ return 0;
+}
+
+static int max9877_set_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+ unsigned int invert = mc->invert;
+ unsigned int val = (ucontrol->value.integer.value[0] & mask);
+
+ if (invert)
+ val = mask - val;
+
+ if (((max9877_regs[reg] >> shift) & mask) == val)
+ return 0;
+
+ max9877_regs[reg] &= ~(mask << shift);
+ max9877_regs[reg] |= val << shift;
+ max9877_write_regs();
+
+ return 1;
+}
+
+static int max9877_get_2reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+
+ ucontrol->value.integer.value[0] = (max9877_regs[reg] >> shift) & mask;
+ ucontrol->value.integer.value[1] = (max9877_regs[reg2] >> shift) & mask;
+
+ return 0;
+}
+
+static int max9877_set_2reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
+ unsigned int shift = mc->shift;
+ unsigned int mask = mc->max;
+ unsigned int val = (ucontrol->value.integer.value[0] & mask);
+ unsigned int val2 = (ucontrol->value.integer.value[1] & mask);
+ unsigned int change = 1;
+
+ if (((max9877_regs[reg] >> shift) & mask) == val)
+ change = 0;
+
+ if (((max9877_regs[reg2] >> shift) & mask) == val2)
+ change = 0;
+
+ if (change) {
+ max9877_regs[reg] &= ~(mask << shift);
+ max9877_regs[reg] |= val << shift;
+ max9877_regs[reg2] &= ~(mask << shift);
+ max9877_regs[reg2] |= val2 << shift;
+ max9877_write_regs();
+ }
+
+ return change;
+}
+
+static int max9877_get_out_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OUTMODE_MASK;
+
+ if (value)
+ value -= 1;
+
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int max9877_set_out_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = ucontrol->value.integer.value[0];
+
+ value += 1;
+
+ if ((max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OUTMODE_MASK) == value)
+ return 0;
+
+ max9877_regs[MAX9877_OUTPUT_MODE] &= ~MAX9877_OUTMODE_MASK;
+ max9877_regs[MAX9877_OUTPUT_MODE] |= value;
+ max9877_write_regs();
+ return 1;
+}
+
+static int max9877_get_osc_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = (max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OSC_MASK);
+
+ value = value >> MAX9877_OSC_OFFSET;
+
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int max9877_set_osc_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 value = ucontrol->value.integer.value[0];
+
+ value = value << MAX9877_OSC_OFFSET;
+ if ((max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OSC_MASK) == value)
+ return 0;
+
+ max9877_regs[MAX9877_OUTPUT_MODE] &= ~MAX9877_OSC_MASK;
+ max9877_regs[MAX9877_OUTPUT_MODE] |= value;
+ max9877_write_regs();
+ return 1;
+}
+
+static const unsigned int max9877_pgain_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 1, TLV_DB_SCALE_ITEM(0, 900, 0),
+ 2, 2, TLV_DB_SCALE_ITEM(2000, 0, 0),
+};
+
+static const unsigned int max9877_output_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 7, TLV_DB_SCALE_ITEM(-7900, 400, 1),
+ 8, 15, TLV_DB_SCALE_ITEM(-4700, 300, 0),
+ 16, 23, TLV_DB_SCALE_ITEM(-2300, 200, 0),
+ 24, 31, TLV_DB_SCALE_ITEM(-700, 100, 0),
+};
+
+static const char *max9877_out_mode[] = {
+ "INA -> SPK",
+ "INA -> HP",
+ "INA -> SPK and HP",
+ "INB -> SPK",
+ "INB -> HP",
+ "INB -> SPK and HP",
+ "INA + INB -> SPK",
+ "INA + INB -> HP",
+ "INA + INB -> SPK and HP",
+};
+
+static const char *max9877_osc_mode[] = {
+ "1176KHz",
+ "1100KHz",
+ "700KHz",
+};
+
+static const struct soc_enum max9877_enum[] = {
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(max9877_out_mode), max9877_out_mode),
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(max9877_osc_mode), max9877_osc_mode),
+};
+
+static const struct snd_kcontrol_new max9877_controls[] = {
+ SOC_SINGLE_EXT_TLV("MAX9877 PGAINA Playback Volume",
+ MAX9877_INPUT_MODE, 0, 2, 0,
+ max9877_get_reg, max9877_set_reg, max9877_pgain_tlv),
+ SOC_SINGLE_EXT_TLV("MAX9877 PGAINB Playback Volume",
+ MAX9877_INPUT_MODE, 2, 2, 0,
+ max9877_get_reg, max9877_set_reg, max9877_pgain_tlv),
+ SOC_SINGLE_EXT_TLV("MAX9877 Amp Speaker Playback Volume",
+ MAX9877_SPK_VOLUME, 0, 31, 0,
+ max9877_get_reg, max9877_set_reg, max9877_output_tlv),
+ SOC_DOUBLE_R_EXT_TLV("MAX9877 Amp HP Playback Volume",
+ MAX9877_HPL_VOLUME, MAX9877_HPR_VOLUME, 0, 31, 0,
+ max9877_get_2reg, max9877_set_2reg, max9877_output_tlv),
+ SOC_SINGLE_EXT("MAX9877 INB Stereo Switch",
+ MAX9877_INPUT_MODE, 4, 1, 1,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 INA Stereo Switch",
+ MAX9877_INPUT_MODE, 5, 1, 1,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 Zero-crossing detection Switch",
+ MAX9877_INPUT_MODE, 6, 1, 0,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 Bypass Mode Switch",
+ MAX9877_OUTPUT_MODE, 6, 1, 0,
+ max9877_get_reg, max9877_set_reg),
+ SOC_SINGLE_EXT("MAX9877 Shutdown Mode Switch",
+ MAX9877_OUTPUT_MODE, 7, 1, 1,
+ max9877_get_reg, max9877_set_reg),
+ SOC_ENUM_EXT("MAX9877 Output Mode", max9877_enum[0],
+ max9877_get_out_mode, max9877_set_out_mode),
+ SOC_ENUM_EXT("MAX9877 Oscillator Mode", max9877_enum[1],
+ max9877_get_osc_mode, max9877_set_osc_mode),
+};
+
+/* This function is called from ASoC machine driver */
+int max9877_add_controls(struct snd_soc_codec *codec)
+{
+ return snd_soc_add_controls(codec, max9877_controls,
+ ARRAY_SIZE(max9877_controls));
+}
+EXPORT_SYMBOL_GPL(max9877_add_controls);
+
+static int __devinit max9877_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ i2c = client;
+
+ max9877_write_regs();
+
+ return 0;
+}
+
+static __devexit int max9877_i2c_remove(struct i2c_client *client)
+{
+ i2c = NULL;
+
+ return 0;
+}
+
+static const struct i2c_device_id max9877_i2c_id[] = {
+ { "max9877", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max9877_i2c_id);
+
+static struct i2c_driver max9877_i2c_driver = {
+ .driver = {
+ .name = "max9877",
+ .owner = THIS_MODULE,
+ },
+ .probe = max9877_i2c_probe,
+ .remove = __devexit_p(max9877_i2c_remove),
+ .id_table = max9877_i2c_id,
+};
+
+static int __init max9877_init(void)
+{
+ return i2c_add_driver(&max9877_i2c_driver);
+}
+module_init(max9877_init);
+
+static void __exit max9877_exit(void)
+{
+ i2c_del_driver(&max9877_i2c_driver);
+}
+module_exit(max9877_exit);
+
+MODULE_DESCRIPTION("ASoC MAX9877 amp driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/max9877.h b/sound/soc/codecs/max9877.h
new file mode 100644
index 0000000..6da7229
--- /dev/null
+++ b/sound/soc/codecs/max9877.h
@@ -0,0 +1,37 @@
+/*
+ * max9877.h -- amp driver for max9877
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _MAX9877_H
+#define _MAX9877_H
+
+#define MAX9877_INPUT_MODE 0x00
+#define MAX9877_SPK_VOLUME 0x01
+#define MAX9877_HPL_VOLUME 0x02
+#define MAX9877_HPR_VOLUME 0x03
+#define MAX9877_OUTPUT_MODE 0x04
+
+/* MAX9877_INPUT_MODE */
+#define MAX9877_INB (1 << 4)
+#define MAX9877_INA (1 << 5)
+#define MAX9877_ZCD (1 << 6)
+
+/* MAX9877_OUTPUT_MODE */
+#define MAX9877_OUTMODE_MASK (15 << 0)
+#define MAX9877_OSC_MASK (3 << 4)
+#define MAX9877_OSC_OFFSET 4
+#define MAX9877_BYPASS (1 << 6)
+#define MAX9877_SHDN (1 << 7)
+
+extern int max9877_add_controls(struct snd_soc_codec *codec);
+
+#endif
diff --git a/sound/soc/codecs/spdif_transciever.c b/sound/soc/codecs/spdif_transciever.c
index 218b33a..a631911 100644
--- a/sound/soc/codecs/spdif_transciever.c
+++ b/sound/soc/codecs/spdif_transciever.c
@@ -21,6 +21,8 @@
#include "spdif_transciever.h"
+MODULE_LICENSE("GPL");
+
#define STUB_RATES SNDRV_PCM_RATE_8000_96000
#define STUB_FORMATS SNDRV_PCM_FMTBIT_S16_LE
@@ -34,6 +36,7 @@
.formats = STUB_FORMATS,
},
};
+EXPORT_SYMBOL_GPL(dit_stub_dai);
static int spdif_dit_probe(struct platform_device *pdev)
{
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
index 8ad4b7b..befc648 100644
--- a/sound/soc/codecs/stac9766.c
+++ b/sound/soc/codecs/stac9766.c
@@ -149,7 +149,7 @@
stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
return 0;
}
- if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+ if (reg / 2 >= ARRAY_SIZE(stac9766_reg))
return -EIO;
soc_ac97_ops.write(codec->ac97, reg, val);
@@ -168,7 +168,7 @@
stac9766_ac97_write(codec, AC97_INT_PAGING, 1);
return val;
}
- if (reg / 2 > ARRAY_SIZE(stac9766_reg))
+ if (reg / 2 >= ARRAY_SIZE(stac9766_reg))
return -EIO;
if (reg == AC97_RESET || reg == AC97_GPIO_STATUS ||
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index cb0d1bf..3395cf9 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -53,6 +53,7 @@
/* codec private data */
struct aic3x_priv {
+ struct snd_soc_codec codec;
unsigned int sysclk;
int master;
};
@@ -145,8 +146,8 @@
u8 *value)
{
*value = reg & 0xff;
- if (codec->hw_read(codec->control_data, value, 1) != 1)
- return -EIO;
+
+ value[0] = i2c_smbus_read_byte_data(codec->control_data, value[0]);
aic3x_write_reg_cache(codec, reg, *value);
return 0;
@@ -1156,11 +1157,13 @@
* initialise the AIC3X driver
* register the mixer and dsp interfaces with the kernel
*/
-static int aic3x_init(struct snd_soc_device *socdev)
+static int aic3x_init(struct snd_soc_codec *codec)
{
- struct snd_soc_codec *codec = socdev->card->codec;
- struct aic3x_setup_data *setup = socdev->codec_data;
- int reg, ret = 0;
+ int reg;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "tlv320aic3x";
codec->owner = THIS_MODULE;
@@ -1177,13 +1180,6 @@
aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT);
aic3x_write(codec, AIC3X_RESET, SOFT_RESET);
- /* register pcms */
- ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
- if (ret < 0) {
- printk(KERN_ERR "aic3x: failed to create pcms\n");
- goto pcm_err;
- }
-
/* DAC default volume and mute */
aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
@@ -1250,30 +1246,51 @@
/* off, with power on */
aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- /* setup GPIO functions */
- aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4);
- aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4);
-
- snd_soc_add_controls(codec, aic3x_snd_controls,
- ARRAY_SIZE(aic3x_snd_controls));
- aic3x_add_widgets(codec);
- ret = snd_soc_init_card(socdev);
- if (ret < 0) {
- printk(KERN_ERR "aic3x: failed to register card\n");
- goto card_err;
- }
-
- return ret;
-
-card_err:
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-pcm_err:
- kfree(codec->reg_cache);
- return ret;
+ return 0;
}
-static struct snd_soc_device *aic3x_socdev;
+static struct snd_soc_codec *aic3x_codec;
+
+static int aic3x_register(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ ret = aic3x_init(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to initialise device\n");
+ return ret;
+ }
+
+ aic3x_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register codec\n");
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&aic3x_dai);
+ if (ret) {
+ dev_err(codec->dev, "Failed to register dai\n");
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int aic3x_unregister(struct aic3x_priv *aic3x)
+{
+ aic3x_set_bias_level(&aic3x->codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_unregister_dai(&aic3x_dai);
+ snd_soc_unregister_codec(&aic3x->codec);
+
+ kfree(aic3x);
+ aic3x_codec = NULL;
+
+ return 0;
+}
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
@@ -1288,28 +1305,36 @@
static int aic3x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct snd_soc_device *socdev = aic3x_socdev;
- struct snd_soc_codec *codec = socdev->card->codec;
- int ret;
+ struct snd_soc_codec *codec;
+ struct aic3x_priv *aic3x;
- i2c_set_clientdata(i2c, codec);
+ aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
+ if (aic3x == NULL) {
+ dev_err(&i2c->dev, "failed to create private data\n");
+ return -ENOMEM;
+ }
+
+ codec = &aic3x->codec;
+ codec->dev = &i2c->dev;
+ codec->private_data = aic3x;
codec->control_data = i2c;
+ codec->hw_write = (hw_write_t) i2c_master_send;
- ret = aic3x_init(socdev);
- if (ret < 0)
- printk(KERN_ERR "aic3x: failed to initialise AIC3X\n");
- return ret;
+ i2c_set_clientdata(i2c, aic3x);
+
+ return aic3x_register(codec);
}
static int aic3x_i2c_remove(struct i2c_client *client)
{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- kfree(codec->reg_cache);
- return 0;
+ struct aic3x_priv *aic3x = i2c_get_clientdata(client);
+
+ return aic3x_unregister(aic3x);
}
static const struct i2c_device_id aic3x_i2c_id[] = {
{ "tlv320aic3x", 0 },
+ { "tlv320aic33", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
@@ -1320,56 +1345,28 @@
.name = "aic3x I2C Codec",
.owner = THIS_MODULE,
},
- .probe = aic3x_i2c_probe,
+ .probe = aic3x_i2c_probe,
.remove = aic3x_i2c_remove,
.id_table = aic3x_i2c_id,
};
-static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)
+static inline void aic3x_i2c_init(void)
{
- value[0] = i2c_smbus_read_byte_data(client, value[0]);
- return (len == 1);
-}
-
-static int aic3x_add_i2c_device(struct platform_device *pdev,
- const struct aic3x_setup_data *setup)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
int ret;
ret = i2c_add_driver(&aic3x_i2c_driver);
- if (ret != 0) {
- dev_err(&pdev->dev, "can't add i2c driver\n");
- return ret;
- }
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = setup->i2c_address;
- strlcpy(info.type, "tlv320aic3x", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(setup->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "can't get i2c adapter %d\n",
- setup->i2c_bus);
- goto err_driver;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- goto err_driver;
- }
-
- return 0;
-
-err_driver:
- i2c_del_driver(&aic3x_i2c_driver);
- return -ENODEV;
+ if (ret)
+ printk(KERN_ERR "%s: error regsitering i2c driver, %d\n",
+ __func__, ret);
}
+
+static inline void aic3x_i2c_exit(void)
+{
+ i2c_del_driver(&aic3x_i2c_driver);
+}
+#else
+static inline void aic3x_i2c_init(void) { }
+static inline void aic3x_i2c_exit(void) { }
#endif
static int aic3x_probe(struct platform_device *pdev)
@@ -1377,43 +1374,51 @@
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct aic3x_setup_data *setup;
struct snd_soc_codec *codec;
- struct aic3x_priv *aic3x;
int ret = 0;
- printk(KERN_INFO "AIC3X Audio Codec %s\n", AIC3X_VERSION);
-
- setup = socdev->codec_data;
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
-
- aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
- if (aic3x == NULL) {
- kfree(codec);
- return -ENOMEM;
+ codec = aic3x_codec;
+ if (!codec) {
+ dev_err(&pdev->dev, "Codec not registered\n");
+ return -ENODEV;
}
- codec->private_data = aic3x;
socdev->card->codec = codec;
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
+ setup = socdev->codec_data;
- aic3x_socdev = socdev;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- if (setup->i2c_address) {
- codec->hw_write = (hw_write_t) i2c_master_send;
- codec->hw_read = (hw_read_t) aic3x_i2c_read;
- ret = aic3x_add_i2c_device(pdev, setup);
+ if (setup) {
+ /* setup GPIO functions */
+ aic3x_write(codec, AIC3X_GPIO1_REG,
+ (setup->gpio_func[0] & 0xf) << 4);
+ aic3x_write(codec, AIC3X_GPIO2_REG,
+ (setup->gpio_func[1] & 0xf) << 4);
}
-#else
- /* Add other interfaces here */
-#endif
- if (ret != 0) {
- kfree(codec->private_data);
- kfree(codec);
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "aic3x: failed to create pcms\n");
+ goto pcm_err;
}
+
+ snd_soc_add_controls(codec, aic3x_snd_controls,
+ ARRAY_SIZE(aic3x_snd_controls));
+
+ aic3x_add_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "aic3x: failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+pcm_err:
+ kfree(codec->reg_cache);
return ret;
}
@@ -1428,12 +1433,8 @@
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- i2c_unregister_device(codec->control_data);
- i2c_del_driver(&aic3x_i2c_driver);
-#endif
- kfree(codec->private_data);
- kfree(codec);
+
+ kfree(codec->reg_cache);
return 0;
}
@@ -1448,13 +1449,15 @@
static int __init aic3x_modinit(void)
{
- return snd_soc_register_dai(&aic3x_dai);
+ aic3x_i2c_init();
+
+ return 0;
}
module_init(aic3x_modinit);
static void __exit aic3x_exit(void)
{
- snd_soc_unregister_dai(&aic3x_dai);
+ aic3x_i2c_exit();
}
module_exit(aic3x_exit);
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index ac827e5..9af1c88 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -282,8 +282,6 @@
int aic3x_button_pressed(struct snd_soc_codec *codec);
struct aic3x_setup_data {
- int i2c_bus;
- unsigned short i2c_address;
unsigned int gpio_func[2];
};
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 4dbb853..4df7c6c 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -225,55 +225,11 @@
return;
if (mute) {
- /* Bypass the reg_cache and mute the volumes
- * Headset mute is done in it's own event handler
- * Things to mute: Earpiece, PreDrivL/R, CarkitL/R
- */
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_EAR_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_EAR_GAIN),
- TWL4030_REG_EAR_CTL);
-
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PREDL_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PREDL_GAIN),
- TWL4030_REG_PREDL_CTL);
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PREDR_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PREDR_GAIN),
- TWL4030_REG_PREDL_CTL);
-
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKL_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PRECKL_GAIN),
- TWL4030_REG_PRECKL_CTL);
- reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL);
- twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
- reg_val & (~TWL4030_PRECKR_GAIN),
- TWL4030_REG_PRECKR_CTL);
-
/* Disable PLL */
reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
reg_val &= ~TWL4030_APLL_EN;
twl4030_write(codec, TWL4030_REG_APLL_CTL, reg_val);
} else {
- /* Restore the volumes
- * Headset mute is done in it's own event handler
- * Things to restore: Earpiece, PreDrivL/R, CarkitL/R
- */
- twl4030_write(codec, TWL4030_REG_EAR_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_EAR_CTL));
-
- twl4030_write(codec, TWL4030_REG_PREDL_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PREDL_CTL));
- twl4030_write(codec, TWL4030_REG_PREDR_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PREDR_CTL));
-
- twl4030_write(codec, TWL4030_REG_PRECKL_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PRECKL_CTL));
- twl4030_write(codec, TWL4030_REG_PRECKR_CTL,
- twl4030_read_reg_cache(codec, TWL4030_REG_PRECKR_CTL));
-
/* Enable PLL */
reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
reg_val |= TWL4030_APLL_EN;
@@ -443,16 +399,20 @@
/* Left analog microphone selection */
static const struct snd_kcontrol_new twl4030_dapm_analoglmic_controls[] = {
- SOC_DAPM_SINGLE("Main mic", TWL4030_REG_ANAMICL, 0, 1, 0),
- SOC_DAPM_SINGLE("Headset mic", TWL4030_REG_ANAMICL, 1, 1, 0),
- SOC_DAPM_SINGLE("AUXL", TWL4030_REG_ANAMICL, 2, 1, 0),
- SOC_DAPM_SINGLE("Carkit mic", TWL4030_REG_ANAMICL, 3, 1, 0),
+ SOC_DAPM_SINGLE("Main Mic Capture Switch",
+ TWL4030_REG_ANAMICL, 0, 1, 0),
+ SOC_DAPM_SINGLE("Headset Mic Capture Switch",
+ TWL4030_REG_ANAMICL, 1, 1, 0),
+ SOC_DAPM_SINGLE("AUXL Capture Switch",
+ TWL4030_REG_ANAMICL, 2, 1, 0),
+ SOC_DAPM_SINGLE("Carkit Mic Capture Switch",
+ TWL4030_REG_ANAMICL, 3, 1, 0),
};
/* Right analog microphone selection */
static const struct snd_kcontrol_new twl4030_dapm_analogrmic_controls[] = {
- SOC_DAPM_SINGLE("Sub mic", TWL4030_REG_ANAMICR, 0, 1, 0),
- SOC_DAPM_SINGLE("AUXR", TWL4030_REG_ANAMICR, 2, 1, 0),
+ SOC_DAPM_SINGLE("Sub Mic Capture Switch", TWL4030_REG_ANAMICR, 0, 1, 0),
+ SOC_DAPM_SINGLE("AUXR Capture Switch", TWL4030_REG_ANAMICR, 2, 1, 0),
};
/* TX1 L/R Analog/Digital microphone selection */
@@ -560,6 +520,41 @@
return 0;
}
+/*
+ * Output PGA builder:
+ * Handle the muting and unmuting of the given output (turning off the
+ * amplifier associated with the output pin)
+ * On mute bypass the reg_cache and mute the volume
+ * On unmute: restore the register content
+ * Outputs handled in this way: Earpiece, PreDrivL/R, CarkitL/R
+ */
+#define TWL4030_OUTPUT_PGA(pin_name, reg, mask) \
+static int pin_name##pga_event(struct snd_soc_dapm_widget *w, \
+ struct snd_kcontrol *kcontrol, int event) \
+{ \
+ u8 reg_val; \
+ \
+ switch (event) { \
+ case SND_SOC_DAPM_POST_PMU: \
+ twl4030_write(w->codec, reg, \
+ twl4030_read_reg_cache(w->codec, reg)); \
+ break; \
+ case SND_SOC_DAPM_POST_PMD: \
+ reg_val = twl4030_read_reg_cache(w->codec, reg); \
+ twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, \
+ reg_val & (~mask), \
+ reg); \
+ break; \
+ } \
+ return 0; \
+}
+
+TWL4030_OUTPUT_PGA(earpiece, TWL4030_REG_EAR_CTL, TWL4030_EAR_GAIN);
+TWL4030_OUTPUT_PGA(predrivel, TWL4030_REG_PREDL_CTL, TWL4030_PREDL_GAIN);
+TWL4030_OUTPUT_PGA(predriver, TWL4030_REG_PREDR_CTL, TWL4030_PREDR_GAIN);
+TWL4030_OUTPUT_PGA(carkitl, TWL4030_REG_PRECKL_CTL, TWL4030_PRECKL_GAIN);
+TWL4030_OUTPUT_PGA(carkitr, TWL4030_REG_PRECKR_CTL, TWL4030_PRECKR_GAIN);
+
static void handsfree_ramp(struct snd_soc_codec *codec, int reg, int ramp)
{
unsigned char hs_ctl;
@@ -620,6 +615,9 @@
static void headset_ramp(struct snd_soc_codec *codec, int ramp)
{
+ struct snd_soc_device *socdev = codec->socdev;
+ struct twl4030_setup_data *setup = socdev->codec_data;
+
unsigned char hs_gain, hs_pop;
struct twl4030_priv *twl4030 = codec->private_data;
/* Base values for ramp delay calculation: 2^19 - 2^26 */
@@ -629,6 +627,17 @@
hs_gain = twl4030_read_reg_cache(codec, TWL4030_REG_HS_GAIN_SET);
hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+ /* Enable external mute control, this dramatically reduces
+ * the pop-noise */
+ if (setup && setup->hs_extmute) {
+ if (setup->set_hs_extmute) {
+ setup->set_hs_extmute(1);
+ } else {
+ hs_pop |= TWL4030_EXTMUTE;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+ }
+ }
+
if (ramp) {
/* Headset ramp-up according to the TRM */
hs_pop |= TWL4030_VMID_EN;
@@ -636,6 +645,9 @@
twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hs_gain);
hs_pop |= TWL4030_RAMP_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+ /* Wait ramp delay time + 1, so the VMID can settle */
+ mdelay((ramp_base[(hs_pop & TWL4030_RAMP_DELAY) >> 2] /
+ twl4030->sysclk) + 1);
} else {
/* Headset ramp-down _not_ according to
* the TRM, but in a way that it is working */
@@ -652,6 +664,16 @@
hs_pop &= ~TWL4030_VMID_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
}
+
+ /* Disable external mute */
+ if (setup && setup->hs_extmute) {
+ if (setup->set_hs_extmute) {
+ setup->set_hs_extmute(0);
+ } else {
+ hs_pop &= ~TWL4030_EXTMUTE;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+ }
+ }
}
static int headsetlpga_event(struct snd_soc_dapm_widget *w,
@@ -712,7 +734,19 @@
reg = twl4030_read_reg_cache(w->codec, m->reg);
- if (m->reg <= TWL4030_REG_ARXR2_APGA_CTL) {
+ /*
+ * bypass_state[0:3] - analog HiFi bypass
+ * bypass_state[4] - analog voice bypass
+ * bypass_state[5] - digital voice bypass
+ * bypass_state[6:7] - digital HiFi bypass
+ */
+ if (m->reg == TWL4030_REG_VSTPGA) {
+ /* Voice digital bypass */
+ if (reg)
+ twl4030->bypass_state |= (1 << 5);
+ else
+ twl4030->bypass_state &= ~(1 << 5);
+ } else if (m->reg <= TWL4030_REG_ARXR2_APGA_CTL) {
/* Analog bypass */
if (reg & (1 << m->shift))
twl4030->bypass_state |=
@@ -726,12 +760,6 @@
twl4030->bypass_state |= (1 << 4);
else
twl4030->bypass_state &= ~(1 << 4);
- } else if (m->reg == TWL4030_REG_VSTPGA) {
- /* Voice digital bypass */
- if (reg)
- twl4030->bypass_state |= (1 << 5);
- else
- twl4030->bypass_state &= ~(1 << 5);
} else {
/* Digital bypass */
if (reg & (0x7 << m->shift))
@@ -924,7 +952,7 @@
ARRAY_SIZE(twl4030_op_modes_texts),
twl4030_op_modes_texts);
-int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
+static int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -1005,6 +1033,16 @@
*/
static DECLARE_TLV_DB_SCALE(input_gain_tlv, 0, 600, 0);
+/* AVADC clock priority */
+static const char *twl4030_avadc_clk_priority_texts[] = {
+ "Voice high priority", "HiFi high priority"
+};
+
+static const struct soc_enum twl4030_avadc_clk_priority_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_AVADC_CTL, 2,
+ ARRAY_SIZE(twl4030_avadc_clk_priority_texts),
+ twl4030_avadc_clk_priority_texts);
+
static const char *twl4030_rampdelay_texts[] = {
"27/20/14 ms", "55/40/27 ms", "109/81/55 ms", "218/161/109 ms",
"437/323/218 ms", "874/645/437 ms", "1748/1291/874 ms",
@@ -1106,6 +1144,8 @@
SOC_DOUBLE_TLV("Analog Capture Volume", TWL4030_REG_ANAMIC_GAIN,
0, 3, 5, 0, input_gain_tlv),
+ SOC_ENUM("AVADC Clock Priority", twl4030_avadc_clk_priority_enum),
+
SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum),
SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum),
@@ -1208,13 +1248,22 @@
SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_earpiece_controls[0],
ARRAY_SIZE(twl4030_dapm_earpiece_controls)),
+ SND_SOC_DAPM_PGA_E("Earpiece PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, earpiecepga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
/* PreDrivL/R */
SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_predrivel_controls[0],
ARRAY_SIZE(twl4030_dapm_predrivel_controls)),
+ SND_SOC_DAPM_PGA_E("PredriveL PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, predrivelpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_predriver_controls[0],
ARRAY_SIZE(twl4030_dapm_predriver_controls)),
+ SND_SOC_DAPM_PGA_E("PredriveR PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, predriverpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
/* HeadsetL/R */
SND_SOC_DAPM_MIXER("HeadsetL Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_hsol_controls[0],
@@ -1232,22 +1281,28 @@
SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_carkitl_controls[0],
ARRAY_SIZE(twl4030_dapm_carkitl_controls)),
+ SND_SOC_DAPM_PGA_E("CarkitL PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, carkitlpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_carkitr_controls[0],
ARRAY_SIZE(twl4030_dapm_carkitr_controls)),
+ SND_SOC_DAPM_PGA_E("CarkitR PGA", SND_SOC_NOPM,
+ 0, 0, NULL, 0, carkitrpga_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
/* Output MUX controls */
/* HandsfreeL/R */
SND_SOC_DAPM_MUX("HandsfreeL Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_handsfreel_control),
- SND_SOC_DAPM_SWITCH("HandsfreeL Switch", SND_SOC_NOPM, 0, 0,
+ SND_SOC_DAPM_SWITCH("HandsfreeL", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_handsfreelmute_control),
SND_SOC_DAPM_PGA_E("HandsfreeL PGA", SND_SOC_NOPM,
0, 0, NULL, 0, handsfreelpga_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MUX("HandsfreeR Mux", SND_SOC_NOPM, 5, 0,
&twl4030_dapm_handsfreer_control),
- SND_SOC_DAPM_SWITCH("HandsfreeR Switch", SND_SOC_NOPM, 0, 0,
+ SND_SOC_DAPM_SWITCH("HandsfreeR", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_handsfreermute_control),
SND_SOC_DAPM_PGA_E("HandsfreeR PGA", SND_SOC_NOPM,
0, 0, NULL, 0, handsfreerpga_event,
@@ -1282,11 +1337,11 @@
SND_SOC_DAPM_POST_REG),
/* Analog input mixers for the capture amplifiers */
- SND_SOC_DAPM_MIXER("Analog Left Capture Route",
+ SND_SOC_DAPM_MIXER("Analog Left",
TWL4030_REG_ANAMICL, 4, 0,
&twl4030_dapm_analoglmic_controls[0],
ARRAY_SIZE(twl4030_dapm_analoglmic_controls)),
- SND_SOC_DAPM_MIXER("Analog Right Capture Route",
+ SND_SOC_DAPM_MIXER("Analog Right",
TWL4030_REG_ANAMICR, 4, 0,
&twl4030_dapm_analogrmic_controls[0],
ARRAY_SIZE(twl4030_dapm_analogrmic_controls)),
@@ -1326,16 +1381,19 @@
{"Earpiece Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"Earpiece Mixer", "AudioL2", "Analog L2 Playback Mixer"},
{"Earpiece Mixer", "AudioR1", "Analog R1 Playback Mixer"},
+ {"Earpiece PGA", NULL, "Earpiece Mixer"},
/* PreDrivL */
{"PredriveL Mixer", "Voice", "Analog Voice Playback Mixer"},
{"PredriveL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"PredriveL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
{"PredriveL Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+ {"PredriveL PGA", NULL, "PredriveL Mixer"},
/* PreDrivR */
{"PredriveR Mixer", "Voice", "Analog Voice Playback Mixer"},
{"PredriveR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
{"PredriveR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
{"PredriveR Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+ {"PredriveR PGA", NULL, "PredriveR Mixer"},
/* HeadsetL */
{"HeadsetL Mixer", "Voice", "Analog Voice Playback Mixer"},
{"HeadsetL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
@@ -1350,24 +1408,26 @@
{"CarkitL Mixer", "Voice", "Analog Voice Playback Mixer"},
{"CarkitL Mixer", "AudioL1", "Analog L1 Playback Mixer"},
{"CarkitL Mixer", "AudioL2", "Analog L2 Playback Mixer"},
+ {"CarkitL PGA", NULL, "CarkitL Mixer"},
/* CarkitR */
{"CarkitR Mixer", "Voice", "Analog Voice Playback Mixer"},
{"CarkitR Mixer", "AudioR1", "Analog R1 Playback Mixer"},
{"CarkitR Mixer", "AudioR2", "Analog R2 Playback Mixer"},
+ {"CarkitR PGA", NULL, "CarkitR Mixer"},
/* HandsfreeL */
{"HandsfreeL Mux", "Voice", "Analog Voice Playback Mixer"},
{"HandsfreeL Mux", "AudioL1", "Analog L1 Playback Mixer"},
{"HandsfreeL Mux", "AudioL2", "Analog L2 Playback Mixer"},
{"HandsfreeL Mux", "AudioR2", "Analog R2 Playback Mixer"},
- {"HandsfreeL Switch", "Switch", "HandsfreeL Mux"},
- {"HandsfreeL PGA", NULL, "HandsfreeL Switch"},
+ {"HandsfreeL", "Switch", "HandsfreeL Mux"},
+ {"HandsfreeL PGA", NULL, "HandsfreeL"},
/* HandsfreeR */
{"HandsfreeR Mux", "Voice", "Analog Voice Playback Mixer"},
{"HandsfreeR Mux", "AudioR1", "Analog R1 Playback Mixer"},
{"HandsfreeR Mux", "AudioR2", "Analog R2 Playback Mixer"},
{"HandsfreeR Mux", "AudioL2", "Analog L2 Playback Mixer"},
- {"HandsfreeR Switch", "Switch", "HandsfreeR Mux"},
- {"HandsfreeR PGA", NULL, "HandsfreeR Switch"},
+ {"HandsfreeR", "Switch", "HandsfreeR Mux"},
+ {"HandsfreeR PGA", NULL, "HandsfreeR"},
/* Vibra */
{"Vibra Mux", "AudioL1", "DAC Left1"},
{"Vibra Mux", "AudioR1", "DAC Right1"},
@@ -1377,29 +1437,29 @@
/* outputs */
{"OUTL", NULL, "Analog L2 Playback Mixer"},
{"OUTR", NULL, "Analog R2 Playback Mixer"},
- {"EARPIECE", NULL, "Earpiece Mixer"},
- {"PREDRIVEL", NULL, "PredriveL Mixer"},
- {"PREDRIVER", NULL, "PredriveR Mixer"},
+ {"EARPIECE", NULL, "Earpiece PGA"},
+ {"PREDRIVEL", NULL, "PredriveL PGA"},
+ {"PREDRIVER", NULL, "PredriveR PGA"},
{"HSOL", NULL, "HeadsetL PGA"},
{"HSOR", NULL, "HeadsetR PGA"},
- {"CARKITL", NULL, "CarkitL Mixer"},
- {"CARKITR", NULL, "CarkitR Mixer"},
+ {"CARKITL", NULL, "CarkitL PGA"},
+ {"CARKITR", NULL, "CarkitR PGA"},
{"HFL", NULL, "HandsfreeL PGA"},
{"HFR", NULL, "HandsfreeR PGA"},
{"Vibra Route", "Audio", "Vibra Mux"},
{"VIBRA", NULL, "Vibra Route"},
/* Capture path */
- {"Analog Left Capture Route", "Main mic", "MAINMIC"},
- {"Analog Left Capture Route", "Headset mic", "HSMIC"},
- {"Analog Left Capture Route", "AUXL", "AUXL"},
- {"Analog Left Capture Route", "Carkit mic", "CARKITMIC"},
+ {"Analog Left", "Main Mic Capture Switch", "MAINMIC"},
+ {"Analog Left", "Headset Mic Capture Switch", "HSMIC"},
+ {"Analog Left", "AUXL Capture Switch", "AUXL"},
+ {"Analog Left", "Carkit Mic Capture Switch", "CARKITMIC"},
- {"Analog Right Capture Route", "Sub mic", "SUBMIC"},
- {"Analog Right Capture Route", "AUXR", "AUXR"},
+ {"Analog Right", "Sub Mic Capture Switch", "SUBMIC"},
+ {"Analog Right", "AUXR Capture Switch", "AUXR"},
- {"ADC Physical Left", NULL, "Analog Left Capture Route"},
- {"ADC Physical Right", NULL, "Analog Right Capture Route"},
+ {"ADC Physical Left", NULL, "Analog Left"},
+ {"ADC Physical Right", NULL, "Analog Right"},
{"Digimic0 Enable", NULL, "DIGIMIC0"},
{"Digimic1 Enable", NULL, "DIGIMIC1"},
@@ -1423,11 +1483,11 @@
{"ADC Virtual Right2", NULL, "TX2 Capture Route"},
/* Analog bypass routes */
- {"Right1 Analog Loopback", "Switch", "Analog Right Capture Route"},
- {"Left1 Analog Loopback", "Switch", "Analog Left Capture Route"},
- {"Right2 Analog Loopback", "Switch", "Analog Right Capture Route"},
- {"Left2 Analog Loopback", "Switch", "Analog Left Capture Route"},
- {"Voice Analog Loopback", "Switch", "Analog Left Capture Route"},
+ {"Right1 Analog Loopback", "Switch", "Analog Right"},
+ {"Left1 Analog Loopback", "Switch", "Analog Left"},
+ {"Right2 Analog Loopback", "Switch", "Analog Right"},
+ {"Left2 Analog Loopback", "Switch", "Analog Left"},
+ {"Voice Analog Loopback", "Switch", "Analog Left"},
{"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"},
{"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"},
@@ -1609,8 +1669,6 @@
/* If the substream has 4 channel, do the necessary setup */
if (params_channels(params) == 4) {
- u8 format, mode;
-
format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
@@ -1806,6 +1864,19 @@
return 0;
}
+static int twl4030_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+
+ if (tristate)
+ reg |= TWL4030_AIF_TRI_EN;
+ else
+ reg &= ~TWL4030_AIF_TRI_EN;
+
+ return twl4030_write(codec, TWL4030_REG_AUDIO_IF, reg);
+}
+
/* In case of voice mode, the RX1 L(VRX) for downlink and the TX2 L/R
* (VTXL, VTXR) for uplink has to be enabled/disabled. */
static void twl4030_voice_enable(struct snd_soc_codec *codec, int direction,
@@ -1948,7 +2019,7 @@
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBS_CFM:
+ case SND_SOC_DAIFMT_CBM_CFM:
format &= ~(TWL4030_VIF_SLAVE_EN);
break;
case SND_SOC_DAIFMT_CBS_CFS:
@@ -1980,6 +2051,19 @@
return 0;
}
+static int twl4030_voice_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_VOICE_IF);
+
+ if (tristate)
+ reg |= TWL4030_VIF_TRI_EN;
+ else
+ reg &= ~TWL4030_VIF_TRI_EN;
+
+ return twl4030_write(codec, TWL4030_REG_VOICE_IF, reg);
+}
+
#define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000)
#define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
@@ -1989,6 +2073,7 @@
.hw_params = twl4030_hw_params,
.set_sysclk = twl4030_set_dai_sysclk,
.set_fmt = twl4030_set_dai_fmt,
+ .set_tristate = twl4030_set_tristate,
};
static struct snd_soc_dai_ops twl4030_dai_voice_ops = {
@@ -1997,6 +2082,7 @@
.hw_params = twl4030_voice_hw_params,
.set_sysclk = twl4030_voice_set_dai_sysclk,
.set_fmt = twl4030_voice_set_dai_fmt,
+ .set_tristate = twl4030_voice_set_tristate,
};
struct snd_soc_dai twl4030_dai[] = {
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index fe5f395..2b4bfa2 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -274,6 +274,8 @@
struct twl4030_setup_data {
unsigned int ramp_delay_value;
unsigned int sysclk;
+ unsigned int hs_extmute:1;
+ void (*set_hs_extmute)(int mute);
};
#endif /* End of __TWL4030_AUDIO_H__ */
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 269b108..c33b92e 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -163,7 +163,7 @@
else
mute_reg &= ~(1<<2);
- uda134x_write(codec, UDA134X_DATA010, mute_reg & ~(1<<2));
+ uda134x_write(codec, UDA134X_DATA010, mute_reg);
return 0;
}
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index 5b21594..92ec034 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -5,9 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
- * Improved support for DAPM and audio routing/mixing capabilities,
- * added TLV support.
+ * Copyright (c) 2007-2009 Philipp Zabel <philipp.zabel@gmail.com>
*
* Modified by Richard Purdie <richard@openedhand.com> to fit into SoC
* codec model.
@@ -19,26 +17,32 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/string.h>
#include <linux/slab.h>
#include <linux/errno.h>
-#include <linux/ioctl.h>
+#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/initval.h>
-#include <sound/info.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
+#include <sound/uda1380.h>
#include "uda1380.h"
-static struct work_struct uda1380_work;
static struct snd_soc_codec *uda1380_codec;
+/* codec private data */
+struct uda1380_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[UDA1380_CACHEREGNUM];
+ unsigned int dac_clk;
+ struct work_struct work;
+};
+
/*
* uda1380 register cache
*/
@@ -473,6 +477,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
+ struct uda1380_priv *uda1380 = codec->private_data;
int mixer = uda1380_read_reg_cache(codec, UDA1380_MIXER);
switch (cmd) {
@@ -480,13 +485,13 @@
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
uda1380_write_reg_cache(codec, UDA1380_MIXER,
mixer & ~R14_SILENCE);
- schedule_work(&uda1380_work);
+ schedule_work(&uda1380->work);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
uda1380_write_reg_cache(codec, UDA1380_MIXER,
mixer | R14_SILENCE);
- schedule_work(&uda1380_work);
+ schedule_work(&uda1380->work);
break;
}
return 0;
@@ -670,44 +675,33 @@
return 0;
}
-/*
- * initialise the UDA1380 driver
- * register mixer and dsp interfaces with the kernel
- */
-static int uda1380_init(struct snd_soc_device *socdev, int dac_clk)
+static int uda1380_probe(struct platform_device *pdev)
{
- struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct uda1380_platform_data *pdata;
int ret = 0;
- codec->name = "UDA1380";
- codec->owner = THIS_MODULE;
- codec->read = uda1380_read_reg_cache;
- codec->write = uda1380_write;
- codec->set_bias_level = uda1380_set_bias_level;
- codec->dai = uda1380_dai;
- codec->num_dai = ARRAY_SIZE(uda1380_dai);
- codec->reg_cache = kmemdup(uda1380_reg, sizeof(uda1380_reg),
- GFP_KERNEL);
- if (codec->reg_cache == NULL)
- return -ENOMEM;
- codec->reg_cache_size = ARRAY_SIZE(uda1380_reg);
- codec->reg_cache_step = 1;
- uda1380_reset(codec);
+ if (uda1380_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
- uda1380_codec = codec;
- INIT_WORK(&uda1380_work, uda1380_flush_work);
+ socdev->card->codec = uda1380_codec;
+ codec = uda1380_codec;
+ pdata = codec->dev->platform_data;
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
- pr_err("uda1380: failed to create pcms\n");
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
goto pcm_err;
}
/* power on device */
uda1380_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* set clock input */
- switch (dac_clk) {
+ switch (pdata->dac_clk) {
case UDA1380_DAC_CLK_SYSCLK:
uda1380_write(codec, UDA1380_CLK, 0);
break;
@@ -716,13 +710,12 @@
break;
}
- /* uda1380 init */
snd_soc_add_controls(codec, uda1380_snd_controls,
ARRAY_SIZE(uda1380_snd_controls));
uda1380_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
- pr_err("uda1380: failed to register card\n");
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
goto card_err;
}
@@ -732,36 +725,164 @@
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
pcm_err:
- kfree(codec->reg_cache);
return ret;
}
-static struct snd_soc_device *uda1380_socdev;
+/* power down chip */
+static int uda1380_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ if (codec->control_data)
+ uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_uda1380 = {
+ .probe = uda1380_probe,
+ .remove = uda1380_remove,
+ .suspend = uda1380_suspend,
+ .resume = uda1380_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_uda1380);
+
+static int uda1380_register(struct uda1380_priv *uda1380)
+{
+ int ret, i;
+ struct snd_soc_codec *codec = &uda1380->codec;
+ struct uda1380_platform_data *pdata = codec->dev->platform_data;
+
+ if (uda1380_codec) {
+ dev_err(codec->dev, "Another UDA1380 is registered\n");
+ return -EINVAL;
+ }
+
+ if (!pdata || !pdata->gpio_power || !pdata->gpio_reset)
+ return -EINVAL;
+
+ ret = gpio_request(pdata->gpio_power, "uda1380 power");
+ if (ret)
+ goto err_out;
+ ret = gpio_request(pdata->gpio_reset, "uda1380 reset");
+ if (ret)
+ goto err_gpio;
+
+ gpio_direction_output(pdata->gpio_power, 1);
+
+ /* we may need to have the clock running here - pH5 */
+ gpio_direction_output(pdata->gpio_reset, 1);
+ udelay(5);
+ gpio_set_value(pdata->gpio_reset, 0);
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = uda1380;
+ codec->name = "UDA1380";
+ codec->owner = THIS_MODULE;
+ codec->read = uda1380_read_reg_cache;
+ codec->write = uda1380_write;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = uda1380_set_bias_level;
+ codec->dai = uda1380_dai;
+ codec->num_dai = ARRAY_SIZE(uda1380_dai);
+ codec->reg_cache_size = ARRAY_SIZE(uda1380_reg);
+ codec->reg_cache = &uda1380->reg_cache;
+ codec->reg_cache_step = 1;
+
+ memcpy(codec->reg_cache, uda1380_reg, sizeof(uda1380_reg));
+
+ ret = uda1380_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err_reset;
+ }
+
+ INIT_WORK(&uda1380->work, uda1380_flush_work);
+
+ for (i = 0; i < ARRAY_SIZE(uda1380_dai); i++)
+ uda1380_dai[i].dev = codec->dev;
+
+ uda1380_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err_reset;
+ }
+
+ ret = snd_soc_register_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+ goto err_dai;
+ }
+
+ return 0;
+
+err_dai:
+ snd_soc_unregister_codec(codec);
+err_reset:
+ gpio_set_value(pdata->gpio_power, 0);
+ gpio_free(pdata->gpio_reset);
+err_gpio:
+ gpio_free(pdata->gpio_power);
+err_out:
+ return ret;
+}
+
+static void uda1380_unregister(struct uda1380_priv *uda1380)
+{
+ struct snd_soc_codec *codec = &uda1380->codec;
+ struct uda1380_platform_data *pdata = codec->dev->platform_data;
+
+ snd_soc_unregister_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+ snd_soc_unregister_codec(&uda1380->codec);
+
+ gpio_set_value(pdata->gpio_power, 0);
+ gpio_free(pdata->gpio_reset);
+ gpio_free(pdata->gpio_power);
+
+ kfree(uda1380);
+ uda1380_codec = NULL;
+}
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-
-static int uda1380_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static __devinit int uda1380_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
{
- struct snd_soc_device *socdev = uda1380_socdev;
- struct uda1380_setup_data *setup = socdev->codec_data;
- struct snd_soc_codec *codec = socdev->card->codec;
+ struct uda1380_priv *uda1380;
+ struct snd_soc_codec *codec;
int ret;
- i2c_set_clientdata(i2c, codec);
+ uda1380 = kzalloc(sizeof(struct uda1380_priv), GFP_KERNEL);
+ if (uda1380 == NULL)
+ return -ENOMEM;
+
+ codec = &uda1380->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, uda1380);
codec->control_data = i2c;
- ret = uda1380_init(socdev, setup->dac_clk);
- if (ret < 0)
- pr_err("uda1380: failed to initialise UDA1380\n");
+ codec->dev = &i2c->dev;
+
+ ret = uda1380_register(uda1380);
+ if (ret != 0)
+ kfree(uda1380);
return ret;
}
-static int uda1380_i2c_remove(struct i2c_client *client)
+static int __devexit uda1380_i2c_remove(struct i2c_client *i2c)
{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- kfree(codec->reg_cache);
+ struct uda1380_priv *uda1380 = i2c_get_clientdata(i2c);
+ uda1380_unregister(uda1380);
return 0;
}
@@ -777,120 +898,28 @@
.owner = THIS_MODULE,
},
.probe = uda1380_i2c_probe,
- .remove = uda1380_i2c_remove,
+ .remove = __devexit_p(uda1380_i2c_remove),
.id_table = uda1380_i2c_id,
};
-
-static int uda1380_add_i2c_device(struct platform_device *pdev,
- const struct uda1380_setup_data *setup)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
- int ret;
-
- ret = i2c_add_driver(&uda1380_i2c_driver);
- if (ret != 0) {
- dev_err(&pdev->dev, "can't add i2c driver\n");
- return ret;
- }
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = setup->i2c_address;
- strlcpy(info.type, "uda1380", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(setup->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "can't get i2c adapter %d\n",
- setup->i2c_bus);
- goto err_driver;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- goto err_driver;
- }
-
- return 0;
-
-err_driver:
- i2c_del_driver(&uda1380_i2c_driver);
- return -ENODEV;
-}
#endif
-static int uda1380_probe(struct platform_device *pdev)
-{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct uda1380_setup_data *setup;
- struct snd_soc_codec *codec;
- int ret;
-
- setup = socdev->codec_data;
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
-
- socdev->card->codec = codec;
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
-
- uda1380_socdev = socdev;
- ret = -ENODEV;
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
- ret = uda1380_add_i2c_device(pdev, setup);
- }
-#endif
-
- if (ret != 0)
- kfree(codec);
- return ret;
-}
-
-/* power down chip */
-static int uda1380_remove(struct platform_device *pdev)
-{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
-
- if (codec->control_data)
- uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- i2c_unregister_device(codec->control_data);
- i2c_del_driver(&uda1380_i2c_driver);
-#endif
- kfree(codec);
-
- return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_uda1380 = {
- .probe = uda1380_probe,
- .remove = uda1380_remove,
- .suspend = uda1380_suspend,
- .resume = uda1380_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_uda1380);
-
static int __init uda1380_modinit(void)
{
- return snd_soc_register_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&uda1380_i2c_driver);
+ if (ret != 0)
+ pr_err("Failed to register UDA1380 I2C driver: %d\n", ret);
+#endif
+ return 0;
}
module_init(uda1380_modinit);
static void __exit uda1380_exit(void)
{
- snd_soc_unregister_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&uda1380_i2c_driver);
+#endif
}
module_exit(uda1380_exit);
diff --git a/sound/soc/codecs/uda1380.h b/sound/soc/codecs/uda1380.h
index c55c17a..9cefa8a 100644
--- a/sound/soc/codecs/uda1380.h
+++ b/sound/soc/codecs/uda1380.h
@@ -72,14 +72,6 @@
#define R22_SKIP_DCFIL 0x0002
#define R23_AGC_EN 0x0001
-struct uda1380_setup_data {
- int i2c_bus;
- unsigned short i2c_address;
- int dac_clk;
-#define UDA1380_DAC_CLK_SYSCLK 0
-#define UDA1380_DAC_CLK_WSPLL 1
-};
-
#define UDA1380_DAI_DUPLEX 0 /* playback and capture on single DAI */
#define UDA1380_DAI_PLAYBACK 1 /* playback DAI */
#define UDA1380_DAI_CAPTURE 2 /* capture DAI */
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index e7348d3..3ff0373 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -63,6 +63,8 @@
struct wm8350_jack_data hpl;
struct wm8350_jack_data hpr;
struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+ int fll_freq_out;
+ int fll_freq_in;
};
static unsigned int wm8350_codec_cache_read(struct snd_soc_codec *codec,
@@ -406,7 +408,6 @@
static const char *wm8350_pol[] = { "Normal", "Inv R", "Inv L", "Inv L & R" };
static const char *wm8350_dacmutem[] = { "Normal", "Soft" };
static const char *wm8350_dacmutes[] = { "Fast", "Slow" };
-static const char *wm8350_dacfilter[] = { "Normal", "Sloping" };
static const char *wm8350_adcfilter[] = { "None", "High Pass" };
static const char *wm8350_adchp[] = { "44.1kHz", "8kHz", "16kHz", "32kHz" };
static const char *wm8350_lr[] = { "Left", "Right" };
@@ -416,7 +417,6 @@
SOC_ENUM_SINGLE(WM8350_DAC_CONTROL, 0, 4, wm8350_pol),
SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 14, 2, wm8350_dacmutem),
SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 13, 2, wm8350_dacmutes),
- SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 12, 2, wm8350_dacfilter),
SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 15, 2, wm8350_adcfilter),
SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 8, 4, wm8350_adchp),
SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 0, 4, wm8350_pol),
@@ -444,10 +444,9 @@
0, 255, 0, dac_pcm_tlv),
SOC_ENUM("Playback PCM Mute Function", wm8350_enum[2]),
SOC_ENUM("Playback PCM Mute Speed", wm8350_enum[3]),
- SOC_ENUM("Playback PCM Filter", wm8350_enum[4]),
- SOC_ENUM("Capture PCM Filter", wm8350_enum[5]),
- SOC_ENUM("Capture PCM HP Filter", wm8350_enum[6]),
- SOC_ENUM("Capture ADC Inversion", wm8350_enum[7]),
+ SOC_ENUM("Capture PCM Filter", wm8350_enum[4]),
+ SOC_ENUM("Capture PCM HP Filter", wm8350_enum[5]),
+ SOC_ENUM("Capture ADC Inversion", wm8350_enum[6]),
SOC_WM8350_DOUBLE_R_TLV("Capture PCM Volume",
WM8350_ADC_DIGITAL_VOLUME_L,
WM8350_ADC_DIGITAL_VOLUME_R,
@@ -613,7 +612,7 @@
/* Out4 Capture Mux */
static const struct snd_kcontrol_new wm8350_out4_capture_controls =
-SOC_DAPM_ENUM("Route", wm8350_enum[8]);
+SOC_DAPM_ENUM("Route", wm8350_enum[7]);
static const struct snd_soc_dapm_widget wm8350_dapm_widgets[] = {
@@ -993,6 +992,7 @@
struct snd_soc_dai *codec_dai)
{
struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8350 *wm8350 = codec->control_data;
u16 iface = wm8350_codec_read(codec, WM8350_AI_FORMATING) &
~WM8350_AIF_WL_MASK;
@@ -1012,6 +1012,19 @@
}
wm8350_codec_write(codec, WM8350_AI_FORMATING, iface);
+
+ /* The sloping stopband filter is recommended for use with
+ * lower sample rates to improve performance.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (params_rate(params) < 24000)
+ wm8350_set_bits(wm8350, WM8350_DAC_MUTE_VOLUME,
+ WM8350_DAC_SB_FILT);
+ else
+ wm8350_clear_bits(wm8350, WM8350_DAC_MUTE_VOLUME,
+ WM8350_DAC_SB_FILT);
+ }
+
return 0;
}
@@ -1093,10 +1106,14 @@
{
struct snd_soc_codec *codec = codec_dai->codec;
struct wm8350 *wm8350 = codec->control_data;
+ struct wm8350_data *priv = codec->private_data;
struct _fll_div fll_div;
int ret = 0;
u16 fll_1, fll_4;
+ if (freq_in == priv->fll_freq_in && freq_out == priv->fll_freq_out)
+ return 0;
+
/* power down FLL - we need to do this for reconfiguration */
wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4,
WM8350_FLL_ENA | WM8350_FLL_OSC_ENA);
@@ -1131,6 +1148,9 @@
wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_FLL_OSC_ENA);
wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_FLL_ENA);
+ priv->fll_freq_out = freq_out;
+ priv->fll_freq_in = freq_in;
+
return 0;
}
@@ -1660,6 +1680,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8350_codec_suspend(struct platform_device *pdev, pm_message_t m)
+{
+ return snd_soc_suspend_device(&pdev->dev);
+}
+
+static int wm8350_codec_resume(struct platform_device *pdev)
+{
+ return snd_soc_resume_device(&pdev->dev);
+}
+#else
+#define wm8350_codec_suspend NULL
+#define wm8350_codec_resume NULL
+#endif
+
static struct platform_driver wm8350_codec_driver = {
.driver = {
.name = "wm8350-codec",
@@ -1667,6 +1702,8 @@
},
.probe = wm8350_codec_probe,
.remove = __devexit_p(wm8350_codec_remove),
+ .suspend = wm8350_codec_suspend,
+ .resume = wm8350_codec_resume,
};
static __init int wm8350_init(void)
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index 502eefa..b9ef4d9 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -1022,10 +1022,15 @@
if (freq_in == wm8400->fll_in && freq_out == wm8400->fll_out)
return 0;
- if (freq_out != 0) {
+ if (freq_out) {
ret = fll_factors(wm8400, &factors, freq_in, freq_out);
if (ret != 0)
return ret;
+ } else {
+ /* Bodge GCC 4.4.0 uninitialised variable warning - it
+ * doesn't seem capable of working out that we exit if
+ * freq_out is 0 before any of the uses. */
+ memset(&factors, 0, sizeof(factors));
}
wm8400->fll_out = freq_out;
@@ -1040,7 +1045,7 @@
reg &= ~WM8400_FLL_OSC_ENA;
wm8400_write(codec, WM8400_FLL_CONTROL_1, reg);
- if (freq_out == 0)
+ if (!freq_out)
return 0;
reg &= ~(WM8400_FLL_REF_FREQ | WM8400_FLL_FRATIO_MASK);
@@ -1553,6 +1558,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8400_pdev_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&pdev->dev);
+}
+
+static int wm8400_pdev_resume(struct platform_device *pdev)
+{
+ return snd_soc_resume_device(&pdev->dev);
+}
+#else
+#define wm8400_pdev_suspend NULL
+#define wm8400_pdev_resume NULL
+#endif
+
static struct platform_driver wm8400_codec_driver = {
.driver = {
.name = "wm8400-codec",
@@ -1560,6 +1580,8 @@
},
.probe = wm8400_codec_probe,
.remove = __exit_p(wm8400_codec_remove),
+ .suspend = wm8400_pdev_suspend,
+ .resume = wm8400_pdev_resume,
};
static int __init wm8400_codec_init(void)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index c8b8dba..060d5d0 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -58,55 +58,7 @@
#define WM8510_POWER1_BIASEN 0x08
#define WM8510_POWER1_BUFIOEN 0x10
-/*
- * read wm8510 register cache
- */
-static inline unsigned int wm8510_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg == WM8510_RESET)
- return 0;
- if (reg >= WM8510_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8510 register cache
- */
-static inline void wm8510_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= WM8510_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-/*
- * write to the WM8510 register space
- */
-static int wm8510_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8510 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8510_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8510_reset(c) wm8510_write(c, WM8510_RESET, 0)
+#define wm8510_reset(c) snd_soc_write(c, WM8510_RESET, 0)
static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" };
static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
@@ -327,27 +279,27 @@
if (freq_in == 0 || freq_out == 0) {
/* Clock CODEC directly from MCLK */
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK);
- wm8510_write(codec, WM8510_CLOCK, reg & 0x0ff);
+ reg = snd_soc_read(codec, WM8510_CLOCK);
+ snd_soc_write(codec, WM8510_CLOCK, reg & 0x0ff);
/* Turn off PLL */
- reg = wm8510_read_reg_cache(codec, WM8510_POWER1);
- wm8510_write(codec, WM8510_POWER1, reg & 0x1df);
+ reg = snd_soc_read(codec, WM8510_POWER1);
+ snd_soc_write(codec, WM8510_POWER1, reg & 0x1df);
return 0;
}
pll_factors(freq_out*4, freq_in);
- wm8510_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n);
- wm8510_write(codec, WM8510_PLLK1, pll_div.k >> 18);
- wm8510_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff);
- wm8510_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff);
- reg = wm8510_read_reg_cache(codec, WM8510_POWER1);
- wm8510_write(codec, WM8510_POWER1, reg | 0x020);
+ snd_soc_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n);
+ snd_soc_write(codec, WM8510_PLLK1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff);
+ reg = snd_soc_read(codec, WM8510_POWER1);
+ snd_soc_write(codec, WM8510_POWER1, reg | 0x020);
/* Run CODEC from PLL instead of MCLK */
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK);
- wm8510_write(codec, WM8510_CLOCK, reg | 0x100);
+ reg = snd_soc_read(codec, WM8510_CLOCK);
+ snd_soc_write(codec, WM8510_CLOCK, reg | 0x100);
return 0;
}
@@ -363,24 +315,24 @@
switch (div_id) {
case WM8510_OPCLKDIV:
- reg = wm8510_read_reg_cache(codec, WM8510_GPIO) & 0x1cf;
- wm8510_write(codec, WM8510_GPIO, reg | div);
+ reg = snd_soc_read(codec, WM8510_GPIO) & 0x1cf;
+ snd_soc_write(codec, WM8510_GPIO, reg | div);
break;
case WM8510_MCLKDIV:
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x11f;
- wm8510_write(codec, WM8510_CLOCK, reg | div);
+ reg = snd_soc_read(codec, WM8510_CLOCK) & 0x11f;
+ snd_soc_write(codec, WM8510_CLOCK, reg | div);
break;
case WM8510_ADCCLK:
- reg = wm8510_read_reg_cache(codec, WM8510_ADC) & 0x1f7;
- wm8510_write(codec, WM8510_ADC, reg | div);
+ reg = snd_soc_read(codec, WM8510_ADC) & 0x1f7;
+ snd_soc_write(codec, WM8510_ADC, reg | div);
break;
case WM8510_DACCLK:
- reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0x1f7;
- wm8510_write(codec, WM8510_DAC, reg | div);
+ reg = snd_soc_read(codec, WM8510_DAC) & 0x1f7;
+ snd_soc_write(codec, WM8510_DAC, reg | div);
break;
case WM8510_BCLKDIV:
- reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1e3;
- wm8510_write(codec, WM8510_CLOCK, reg | div);
+ reg = snd_soc_read(codec, WM8510_CLOCK) & 0x1e3;
+ snd_soc_write(codec, WM8510_CLOCK, reg | div);
break;
default:
return -EINVAL;
@@ -394,7 +346,7 @@
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 iface = 0;
- u16 clk = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1fe;
+ u16 clk = snd_soc_read(codec, WM8510_CLOCK) & 0x1fe;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -441,8 +393,8 @@
return -EINVAL;
}
- wm8510_write(codec, WM8510_IFACE, iface);
- wm8510_write(codec, WM8510_CLOCK, clk);
+ snd_soc_write(codec, WM8510_IFACE, iface);
+ snd_soc_write(codec, WM8510_CLOCK, clk);
return 0;
}
@@ -453,8 +405,8 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 iface = wm8510_read_reg_cache(codec, WM8510_IFACE) & 0x19f;
- u16 adn = wm8510_read_reg_cache(codec, WM8510_ADD) & 0x1f1;
+ u16 iface = snd_soc_read(codec, WM8510_IFACE) & 0x19f;
+ u16 adn = snd_soc_read(codec, WM8510_ADD) & 0x1f1;
/* bit size */
switch (params_format(params)) {
@@ -493,20 +445,20 @@
break;
}
- wm8510_write(codec, WM8510_IFACE, iface);
- wm8510_write(codec, WM8510_ADD, adn);
+ snd_soc_write(codec, WM8510_IFACE, iface);
+ snd_soc_write(codec, WM8510_ADD, adn);
return 0;
}
static int wm8510_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0xffbf;
+ u16 mute_reg = snd_soc_read(codec, WM8510_DAC) & 0xffbf;
if (mute)
- wm8510_write(codec, WM8510_DAC, mute_reg | 0x40);
+ snd_soc_write(codec, WM8510_DAC, mute_reg | 0x40);
else
- wm8510_write(codec, WM8510_DAC, mute_reg);
+ snd_soc_write(codec, WM8510_DAC, mute_reg);
return 0;
}
@@ -514,13 +466,13 @@
static int wm8510_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 power1 = wm8510_read_reg_cache(codec, WM8510_POWER1) & ~0x3;
+ u16 power1 = snd_soc_read(codec, WM8510_POWER1) & ~0x3;
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
power1 |= 0x1; /* VMID 50k */
- wm8510_write(codec, WM8510_POWER1, power1);
+ snd_soc_write(codec, WM8510_POWER1, power1);
break;
case SND_SOC_BIAS_STANDBY:
@@ -528,18 +480,18 @@
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Initial cap charge at VMID 5k */
- wm8510_write(codec, WM8510_POWER1, power1 | 0x3);
+ snd_soc_write(codec, WM8510_POWER1, power1 | 0x3);
mdelay(100);
}
power1 |= 0x2; /* VMID 500k */
- wm8510_write(codec, WM8510_POWER1, power1);
+ snd_soc_write(codec, WM8510_POWER1, power1);
break;
case SND_SOC_BIAS_OFF:
- wm8510_write(codec, WM8510_POWER1, 0);
- wm8510_write(codec, WM8510_POWER2, 0);
- wm8510_write(codec, WM8510_POWER3, 0);
+ snd_soc_write(codec, WM8510_POWER1, 0);
+ snd_soc_write(codec, WM8510_POWER2, 0);
+ snd_soc_write(codec, WM8510_POWER3, 0);
break;
}
@@ -577,6 +529,7 @@
.rates = WM8510_RATES,
.formats = WM8510_FORMATS,},
.ops = &wm8510_dai_ops,
+ .symmetric_rates = 1,
};
EXPORT_SYMBOL_GPL(wm8510_dai);
@@ -612,15 +565,14 @@
* initialise the WM8510 driver
* register the mixer and dsp interfaces with the kernel
*/
-static int wm8510_init(struct snd_soc_device *socdev)
+static int wm8510_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int ret = 0;
codec->name = "WM8510";
codec->owner = THIS_MODULE;
- codec->read = wm8510_read_reg_cache;
- codec->write = wm8510_write;
codec->set_bias_level = wm8510_set_bias_level;
codec->dai = &wm8510_dai;
codec->num_dai = 1;
@@ -630,13 +582,20 @@
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8510: failed to set cache I/O: %d\n",
+ ret);
+ goto err;
+ }
+
wm8510_reset(codec);
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8510: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* power on device */
@@ -655,7 +614,7 @@
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
@@ -678,7 +637,7 @@
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = wm8510_init(socdev);
+ ret = wm8510_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8510\n");
@@ -758,7 +717,7 @@
codec->control_data = spi;
- ret = wm8510_init(socdev);
+ ret = wm8510_init(socdev, SND_SOC_SPI);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8510\n");
@@ -779,30 +738,6 @@
.probe = wm8510_spi_probe,
.remove = __devexit_p(wm8510_spi_remove),
};
-
-static int wm8510_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif /* CONFIG_SPI_MASTER */
static int wm8510_probe(struct platform_device *pdev)
@@ -827,13 +762,11 @@
wm8510_socdev = socdev;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8510_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8510_spi_write;
ret = spi_register_driver(&wm8510_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
new file mode 100644
index 0000000..25870a4
--- /dev/null
+++ b/sound/soc/codecs/wm8523.c
@@ -0,0 +1,699 @@
+/*
+ * wm8523.c -- WM8523 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8523.h"
+
+static struct snd_soc_codec *wm8523_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8523;
+
+#define WM8523_NUM_SUPPLIES 2
+static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
+ "AVDD",
+ "LINEVDD",
+};
+
+#define WM8523_NUM_RATES 7
+
+/* codec private data */
+struct wm8523_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8523_REGISTER_COUNT];
+ struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
+ unsigned int sysclk;
+ unsigned int rate_constraint_list[WM8523_NUM_RATES];
+ struct snd_pcm_hw_constraint_list rate_constraint;
+};
+
+static const u16 wm8523_reg[WM8523_REGISTER_COUNT] = {
+ 0x8523, /* R0 - DEVICE_ID */
+ 0x0001, /* R1 - REVISION */
+ 0x0000, /* R2 - PSCTRL1 */
+ 0x1812, /* R3 - AIF_CTRL1 */
+ 0x0000, /* R4 - AIF_CTRL2 */
+ 0x0001, /* R5 - DAC_CTRL3 */
+ 0x0190, /* R6 - DAC_GAINL */
+ 0x0190, /* R7 - DAC_GAINR */
+ 0x0000, /* R8 - ZERO_DETECT */
+};
+
+static int wm8523_volatile_register(unsigned int reg)
+{
+ switch (reg) {
+ case WM8523_DEVICE_ID:
+ case WM8523_REVISION:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int wm8523_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8523_DEVICE_ID, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0);
+
+static const char *wm8523_zd_count_text[] = {
+ "1024",
+ "2048",
+};
+
+static const struct soc_enum wm8523_zc_count =
+ SOC_ENUM_SINGLE(WM8523_ZERO_DETECT, 0, 2, wm8523_zd_count_text);
+
+static const struct snd_kcontrol_new wm8523_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR,
+ 0, 448, 0, dac_tlv),
+SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0),
+SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0),
+SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1),
+SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0),
+SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0),
+SOC_ENUM("Zero Detect Count", wm8523_zc_count),
+};
+
+static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = {
+SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_OUTPUT("LINEVOUTL"),
+SND_SOC_DAPM_OUTPUT("LINEVOUTR"),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+ { "LINEVOUTL", NULL, "DAC" },
+ { "LINEVOUTR", NULL, "DAC" },
+};
+
+static int wm8523_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8523_dapm_widgets,
+ ARRAY_SIZE(wm8523_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+static struct {
+ int value;
+ int ratio;
+} lrclk_ratios[WM8523_NUM_RATES] = {
+ { 1, 128 },
+ { 2, 192 },
+ { 3, 256 },
+ { 4, 384 },
+ { 5, 512 },
+ { 6, 768 },
+ { 7, 1152 },
+};
+
+static int wm8523_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8523_priv *wm8523 = codec->private_data;
+
+ /* The set of sample rates that can be supported depends on the
+ * MCLK supplied to the CODEC - enforce this.
+ */
+ if (!wm8523->sysclk) {
+ dev_err(codec->dev,
+ "No MCLK configured, call set_sysclk() on init\n");
+ return -EINVAL;
+ }
+
+ return 0;
+ snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &wm8523->rate_constraint);
+
+ return 0;
+}
+
+static int wm8523_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct wm8523_priv *wm8523 = codec->private_data;
+ int i;
+ u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
+ u16 aifctrl2 = snd_soc_read(codec, WM8523_AIF_CTRL2);
+
+ /* Find a supported LRCLK ratio */
+ for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
+ if (wm8523->sysclk / params_rate(params) ==
+ lrclk_ratios[i].ratio)
+ break;
+ }
+
+ /* Should never happen, should be handled by constraints */
+ if (i == ARRAY_SIZE(lrclk_ratios)) {
+ dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n",
+ wm8523->sysclk / params_rate(params));
+ return -EINVAL;
+ }
+
+ aifctrl2 &= ~WM8523_SR_MASK;
+ aifctrl2 |= lrclk_ratios[i].value;
+
+ aifctrl1 &= ~WM8523_WL_MASK;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ aifctrl1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ aifctrl1 |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ aifctrl1 |= 0x18;
+ break;
+ }
+
+ snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
+ snd_soc_write(codec, WM8523_AIF_CTRL2, aifctrl2);
+
+ return 0;
+}
+
+static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8523_priv *wm8523 = codec->private_data;
+ unsigned int val;
+ int i;
+
+ wm8523->sysclk = freq;
+
+ wm8523->rate_constraint.count = 0;
+ for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
+ val = freq / lrclk_ratios[i].ratio;
+ /* Check that it's a standard rate since core can't
+ * cope with others and having the odd rates confuses
+ * constraint matching.
+ */
+ switch (val) {
+ case 8000:
+ case 11025:
+ case 16000:
+ case 22050:
+ case 32000:
+ case 44100:
+ case 48000:
+ case 64000:
+ case 88200:
+ case 96000:
+ case 176400:
+ case 192000:
+ dev_dbg(codec->dev, "Supported sample rate: %dHz\n",
+ val);
+ wm8523->rate_constraint_list[i] = val;
+ wm8523->rate_constraint.count++;
+ break;
+ default:
+ dev_dbg(codec->dev, "Skipping sample rate: %dHz\n",
+ val);
+ }
+ }
+
+ /* Need at least one supported rate... */
+ if (wm8523->rate_constraint.count == 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
+
+ aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK |
+ WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aifctrl1 |= WM8523_AIF_MSTR;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ aifctrl1 |= 0x0002;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aifctrl1 |= 0x0001;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ aifctrl1 |= 0x0003;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ aifctrl1 |= 0x0023;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aifctrl1 |= WM8523_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aifctrl1 |= WM8523_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
+
+ return 0;
+}
+
+static int wm8523_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8523_priv *wm8523 = codec->private_data;
+ int ret, i;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* Full power on */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 3);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to enable supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ /* Initial power up */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 1);
+
+ /* Sync back default/cached values */
+ for (i = WM8523_AIF_CTRL1;
+ i < WM8523_MAX_REGISTER; i++)
+ snd_soc_write(codec, i, wm8523->reg_cache[i]);
+
+
+ msleep(100);
+ }
+
+ /* Power up to mute */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 2);
+
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* The chip runs through the power down sequence for us. */
+ snd_soc_update_bits(codec, WM8523_PSCTRL1,
+ WM8523_SYS_ENA_MASK, 0);
+ msleep(100);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8523_RATES SNDRV_PCM_RATE_8000_192000
+
+#define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8523_dai_ops = {
+ .startup = wm8523_startup,
+ .hw_params = wm8523_hw_params,
+ .set_sysclk = wm8523_set_dai_sysclk,
+ .set_fmt = wm8523_set_dai_fmt,
+};
+
+struct snd_soc_dai wm8523_dai = {
+ .name = "WM8523",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2, /* Mono modes not yet supported */
+ .channels_max = 2,
+ .rates = WM8523_RATES,
+ .formats = WM8523_FORMATS,
+ },
+ .ops = &wm8523_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8523_dai);
+
+#ifdef CONFIG_PM
+static int wm8523_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int wm8523_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8523_suspend NULL
+#define wm8523_resume NULL
+#endif
+
+static int wm8523_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8523_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8523_codec;
+ codec = wm8523_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8523_snd_controls,
+ ARRAY_SIZE(wm8523_snd_controls));
+ wm8523_add_widgets(codec);
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+static int wm8523_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8523 = {
+ .probe = wm8523_probe,
+ .remove = wm8523_remove,
+ .suspend = wm8523_suspend,
+ .resume = wm8523_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8523);
+
+static int wm8523_register(struct wm8523_priv *wm8523,
+ enum snd_soc_control_type control)
+{
+ int ret;
+ struct snd_soc_codec *codec = &wm8523->codec;
+ int i;
+
+ if (wm8523_codec) {
+ dev_err(codec->dev, "Another WM8523 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8523;
+ codec->name = "WM8523";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8523_set_bias_level;
+ codec->dai = &wm8523_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8523_REGISTER_COUNT;
+ codec->reg_cache = &wm8523->reg_cache;
+ codec->volatile_register = wm8523_volatile_register;
+
+ wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
+ wm8523->rate_constraint.count =
+ ARRAY_SIZE(wm8523->rate_constraint_list);
+
+ memcpy(codec->reg_cache, wm8523_reg, sizeof(wm8523_reg));
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
+ wm8523->supplies[i].supply = wm8523_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ ret = snd_soc_read(codec, WM8523_DEVICE_ID);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read ID register\n");
+ goto err_enable;
+ }
+ if (ret != wm8523_reg[WM8523_DEVICE_ID]) {
+ dev_err(codec->dev, "Device is not a WM8523, ID is %x\n", ret);
+ ret = -EINVAL;
+ goto err_enable;
+ }
+
+ ret = snd_soc_read(codec, WM8523_REVISION);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to read revision register\n");
+ goto err_enable;
+ }
+ dev_info(codec->dev, "revision %c\n",
+ (ret & WM8523_CHIP_REV_MASK) + 'A');
+
+ ret = wm8523_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err_enable;
+ }
+
+ wm8523_dai.dev = codec->dev;
+
+ /* Change some default settings - latch VU and enable ZC */
+ wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
+ wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
+
+ wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Bias level configuration will have done an extra enable */
+ regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+
+ wm8523_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&wm8523_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+err:
+ kfree(wm8523);
+ return ret;
+}
+
+static void wm8523_unregister(struct wm8523_priv *wm8523)
+{
+ wm8523_set_bias_level(&wm8523->codec, SND_SOC_BIAS_OFF);
+ regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
+ snd_soc_unregister_dai(&wm8523_dai);
+ snd_soc_unregister_codec(&wm8523->codec);
+ kfree(wm8523);
+ wm8523_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8523_priv *wm8523;
+ struct snd_soc_codec *codec;
+
+ wm8523 = kzalloc(sizeof(struct wm8523_priv), GFP_KERNEL);
+ if (wm8523 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8523->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8523);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8523_register(wm8523, SND_SOC_I2C);
+}
+
+static __devexit int wm8523_i2c_remove(struct i2c_client *client)
+{
+ struct wm8523_priv *wm8523 = i2c_get_clientdata(client);
+ wm8523_unregister(wm8523);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8523_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&i2c->dev);
+}
+
+static int wm8523_i2c_resume(struct i2c_client *i2c)
+{
+ return snd_soc_resume_device(&i2c->dev);
+}
+#else
+#define wm8523_i2c_suspend NULL
+#define wm8523_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8523_i2c_id[] = {
+ { "wm8523", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id);
+
+static struct i2c_driver wm8523_i2c_driver = {
+ .driver = {
+ .name = "WM8523",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8523_i2c_probe,
+ .remove = __devexit_p(wm8523_i2c_remove),
+ .suspend = wm8523_i2c_suspend,
+ .resume = wm8523_i2c_resume,
+ .id_table = wm8523_i2c_id,
+};
+#endif
+
+static int __init wm8523_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8523_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8523 I2C driver: %d\n",
+ ret);
+ }
+#endif
+ return 0;
+}
+module_init(wm8523_modinit);
+
+static void __exit wm8523_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8523_i2c_driver);
+#endif
+}
+module_exit(wm8523_exit);
+
+MODULE_DESCRIPTION("ASoC WM8523 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8523.h b/sound/soc/codecs/wm8523.h
new file mode 100644
index 0000000..1aa9ce3
--- /dev/null
+++ b/sound/soc/codecs/wm8523.h
@@ -0,0 +1,160 @@
+/*
+ * wm8523.h -- WM8423 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics, plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Based on wm8753.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8523_H
+#define _WM8523_H
+
+/*
+ * Register values.
+ */
+#define WM8523_DEVICE_ID 0x00
+#define WM8523_REVISION 0x01
+#define WM8523_PSCTRL1 0x02
+#define WM8523_AIF_CTRL1 0x03
+#define WM8523_AIF_CTRL2 0x04
+#define WM8523_DAC_CTRL3 0x05
+#define WM8523_DAC_GAINL 0x06
+#define WM8523_DAC_GAINR 0x07
+#define WM8523_ZERO_DETECT 0x08
+
+#define WM8523_REGISTER_COUNT 9
+#define WM8523_MAX_REGISTER 0x08
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - DEVICE_ID
+ */
+#define WM8523_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */
+#define WM8523_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */
+#define WM8523_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - REVISION
+ */
+#define WM8523_CHIP_REV_MASK 0x0007 /* CHIP_REV - [2:0] */
+#define WM8523_CHIP_REV_SHIFT 0 /* CHIP_REV - [2:0] */
+#define WM8523_CHIP_REV_WIDTH 3 /* CHIP_REV - [2:0] */
+
+/*
+ * R2 (0x02) - PSCTRL1
+ */
+#define WM8523_SYS_ENA_MASK 0x0003 /* SYS_ENA - [1:0] */
+#define WM8523_SYS_ENA_SHIFT 0 /* SYS_ENA - [1:0] */
+#define WM8523_SYS_ENA_WIDTH 2 /* SYS_ENA - [1:0] */
+
+/*
+ * R3 (0x03) - AIF_CTRL1
+ */
+#define WM8523_TDM_MODE_MASK 0x1800 /* TDM_MODE - [12:11] */
+#define WM8523_TDM_MODE_SHIFT 11 /* TDM_MODE - [12:11] */
+#define WM8523_TDM_MODE_WIDTH 2 /* TDM_MODE - [12:11] */
+#define WM8523_TDM_SLOT_MASK 0x0600 /* TDM_SLOT - [10:9] */
+#define WM8523_TDM_SLOT_SHIFT 9 /* TDM_SLOT - [10:9] */
+#define WM8523_TDM_SLOT_WIDTH 2 /* TDM_SLOT - [10:9] */
+#define WM8523_DEEMPH 0x0100 /* DEEMPH */
+#define WM8523_DEEMPH_MASK 0x0100 /* DEEMPH */
+#define WM8523_DEEMPH_SHIFT 8 /* DEEMPH */
+#define WM8523_DEEMPH_WIDTH 1 /* DEEMPH */
+#define WM8523_AIF_MSTR 0x0080 /* AIF_MSTR */
+#define WM8523_AIF_MSTR_MASK 0x0080 /* AIF_MSTR */
+#define WM8523_AIF_MSTR_SHIFT 7 /* AIF_MSTR */
+#define WM8523_AIF_MSTR_WIDTH 1 /* AIF_MSTR */
+#define WM8523_LRCLK_INV 0x0040 /* LRCLK_INV */
+#define WM8523_LRCLK_INV_MASK 0x0040 /* LRCLK_INV */
+#define WM8523_LRCLK_INV_SHIFT 6 /* LRCLK_INV */
+#define WM8523_LRCLK_INV_WIDTH 1 /* LRCLK_INV */
+#define WM8523_BCLK_INV 0x0020 /* BCLK_INV */
+#define WM8523_BCLK_INV_MASK 0x0020 /* BCLK_INV */
+#define WM8523_BCLK_INV_SHIFT 5 /* BCLK_INV */
+#define WM8523_BCLK_INV_WIDTH 1 /* BCLK_INV */
+#define WM8523_WL_MASK 0x0018 /* WL - [4:3] */
+#define WM8523_WL_SHIFT 3 /* WL - [4:3] */
+#define WM8523_WL_WIDTH 2 /* WL - [4:3] */
+#define WM8523_FMT_MASK 0x0007 /* FMT - [2:0] */
+#define WM8523_FMT_SHIFT 0 /* FMT - [2:0] */
+#define WM8523_FMT_WIDTH 3 /* FMT - [2:0] */
+
+/*
+ * R4 (0x04) - AIF_CTRL2
+ */
+#define WM8523_DAC_OP_MUX_MASK 0x00C0 /* DAC_OP_MUX - [7:6] */
+#define WM8523_DAC_OP_MUX_SHIFT 6 /* DAC_OP_MUX - [7:6] */
+#define WM8523_DAC_OP_MUX_WIDTH 2 /* DAC_OP_MUX - [7:6] */
+#define WM8523_BCLKDIV_MASK 0x0038 /* BCLKDIV - [5:3] */
+#define WM8523_BCLKDIV_SHIFT 3 /* BCLKDIV - [5:3] */
+#define WM8523_BCLKDIV_WIDTH 3 /* BCLKDIV - [5:3] */
+#define WM8523_SR_MASK 0x0007 /* SR - [2:0] */
+#define WM8523_SR_SHIFT 0 /* SR - [2:0] */
+#define WM8523_SR_WIDTH 3 /* SR - [2:0] */
+
+/*
+ * R5 (0x05) - DAC_CTRL3
+ */
+#define WM8523_ZC 0x0010 /* ZC */
+#define WM8523_ZC_MASK 0x0010 /* ZC */
+#define WM8523_ZC_SHIFT 4 /* ZC */
+#define WM8523_ZC_WIDTH 1 /* ZC */
+#define WM8523_DACR 0x0008 /* DACR */
+#define WM8523_DACR_MASK 0x0008 /* DACR */
+#define WM8523_DACR_SHIFT 3 /* DACR */
+#define WM8523_DACR_WIDTH 1 /* DACR */
+#define WM8523_DACL 0x0004 /* DACL */
+#define WM8523_DACL_MASK 0x0004 /* DACL */
+#define WM8523_DACL_SHIFT 2 /* DACL */
+#define WM8523_DACL_WIDTH 1 /* DACL */
+#define WM8523_VOL_UP_RAMP 0x0002 /* VOL_UP_RAMP */
+#define WM8523_VOL_UP_RAMP_MASK 0x0002 /* VOL_UP_RAMP */
+#define WM8523_VOL_UP_RAMP_SHIFT 1 /* VOL_UP_RAMP */
+#define WM8523_VOL_UP_RAMP_WIDTH 1 /* VOL_UP_RAMP */
+#define WM8523_VOL_DOWN_RAMP 0x0001 /* VOL_DOWN_RAMP */
+#define WM8523_VOL_DOWN_RAMP_MASK 0x0001 /* VOL_DOWN_RAMP */
+#define WM8523_VOL_DOWN_RAMP_SHIFT 0 /* VOL_DOWN_RAMP */
+#define WM8523_VOL_DOWN_RAMP_WIDTH 1 /* VOL_DOWN_RAMP */
+
+/*
+ * R6 (0x06) - DAC_GAINL
+ */
+#define WM8523_DACL_VU 0x0200 /* DACL_VU */
+#define WM8523_DACL_VU_MASK 0x0200 /* DACL_VU */
+#define WM8523_DACL_VU_SHIFT 9 /* DACL_VU */
+#define WM8523_DACL_VU_WIDTH 1 /* DACL_VU */
+#define WM8523_DACL_VOL_MASK 0x01FF /* DACL_VOL - [8:0] */
+#define WM8523_DACL_VOL_SHIFT 0 /* DACL_VOL - [8:0] */
+#define WM8523_DACL_VOL_WIDTH 9 /* DACL_VOL - [8:0] */
+
+/*
+ * R7 (0x07) - DAC_GAINR
+ */
+#define WM8523_DACR_VU 0x0200 /* DACR_VU */
+#define WM8523_DACR_VU_MASK 0x0200 /* DACR_VU */
+#define WM8523_DACR_VU_SHIFT 9 /* DACR_VU */
+#define WM8523_DACR_VU_WIDTH 1 /* DACR_VU */
+#define WM8523_DACR_VOL_MASK 0x01FF /* DACR_VOL - [8:0] */
+#define WM8523_DACR_VOL_SHIFT 0 /* DACR_VOL - [8:0] */
+#define WM8523_DACR_VOL_WIDTH 9 /* DACR_VOL - [8:0] */
+
+/*
+ * R8 (0x08) - ZERO_DETECT
+ */
+#define WM8523_ZD_COUNT_MASK 0x0003 /* ZD_COUNT - [1:0] */
+#define WM8523_ZD_COUNT_SHIFT 0 /* ZD_COUNT - [1:0] */
+#define WM8523_ZD_COUNT_WIDTH 2 /* ZD_COUNT - [1:0] */
+
+extern struct snd_soc_dai wm8523_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8523;
+
+#endif
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 86c4b24d..6bded8c 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -24,6 +24,8 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -187,82 +189,22 @@
unsigned int out;
};
+#define WM8580_NUM_SUPPLIES 3
+static const char *wm8580_supply_names[WM8580_NUM_SUPPLIES] = {
+ "AVDD",
+ "DVDD",
+ "PVDD",
+};
+
/* codec private data */
struct wm8580_priv {
struct snd_soc_codec codec;
+ struct regulator_bulk_data supplies[WM8580_NUM_SUPPLIES];
u16 reg_cache[WM8580_MAX_REGISTER + 1];
struct pll_state a;
struct pll_state b;
};
-
-/*
- * read wm8580 register cache
- */
-static inline unsigned int wm8580_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8580_reg));
- return cache[reg];
-}
-
-/*
- * write wm8580 register cache
- */
-static inline void wm8580_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- cache[reg] = value;
-}
-
-/*
- * write to the WM8580 register space
- */
-static int wm8580_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- BUG_ON(reg >= ARRAY_SIZE(wm8580_reg));
-
- /* Registers are 9 bits wide */
- value &= 0x1ff;
-
- switch (reg) {
- case WM8580_RESET:
- /* Uncached */
- break;
- default:
- if (value == wm8580_read_reg_cache(codec, reg))
- return 0;
- }
-
- /* data is
- * D15..D9 WM8580 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8580_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-static inline unsigned int wm8580_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- switch (reg) {
- default:
- return wm8580_read_reg_cache(codec, reg);
- }
-}
-
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
@@ -271,25 +213,22 @@
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ u16 *reg_cache = codec->reg_cache;
unsigned int reg = mc->reg;
unsigned int reg2 = mc->rreg;
int ret;
- u16 val;
/* Clear the register cache so we write without VU set */
- wm8580_write_reg_cache(codec, reg, 0);
- wm8580_write_reg_cache(codec, reg2, 0);
+ reg_cache[reg] = 0;
+ reg_cache[reg2] = 0;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
if (ret < 0)
return ret;
/* Now write again with the volume update bit set */
- val = wm8580_read_reg_cache(codec, reg);
- wm8580_write(codec, reg, val | 0x0100);
-
- val = wm8580_read_reg_cache(codec, reg2);
- wm8580_write(codec, reg2, val | 0x0100);
+ snd_soc_update_bits(codec, reg, 0x100, 0x100);
+ snd_soc_update_bits(codec, reg2, 0x100, 0x100);
return 0;
}
@@ -512,27 +451,27 @@
/* Always disable the PLL - it is not safe to leave it running
* while reprogramming it.
*/
- reg = wm8580_read(codec, WM8580_PWRDN2);
- wm8580_write(codec, WM8580_PWRDN2, reg | pwr_mask);
+ reg = snd_soc_read(codec, WM8580_PWRDN2);
+ snd_soc_write(codec, WM8580_PWRDN2, reg | pwr_mask);
if (!freq_in || !freq_out)
return 0;
- wm8580_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
- wm8580_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0xff);
- wm8580_write(codec, WM8580_PLLA3 + offset,
+ snd_soc_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
+ snd_soc_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8580_PLLA3 + offset,
(pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
- reg = wm8580_read(codec, WM8580_PLLA4 + offset);
- reg &= ~0x3f;
+ reg = snd_soc_read(codec, WM8580_PLLA4 + offset);
+ reg &= ~0x1b;
reg |= pll_div.prescale | pll_div.postscale << 1 |
pll_div.freqmode << 3;
- wm8580_write(codec, WM8580_PLLA4 + offset, reg);
+ snd_soc_write(codec, WM8580_PLLA4 + offset, reg);
/* All done, turn it on */
- reg = wm8580_read(codec, WM8580_PWRDN2);
- wm8580_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
+ reg = snd_soc_read(codec, WM8580_PWRDN2);
+ snd_soc_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
return 0;
}
@@ -547,7 +486,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->id);
+ u16 paifb = snd_soc_read(codec, WM8580_PAIF3 + dai->id);
paifb &= ~WM8580_AIF_LENGTH_MASK;
/* bit size */
@@ -567,7 +506,7 @@
return -EINVAL;
}
- wm8580_write(codec, WM8580_PAIF3 + dai->id, paifb);
+ snd_soc_write(codec, WM8580_PAIF3 + dai->id, paifb);
return 0;
}
@@ -579,8 +518,8 @@
unsigned int aifb;
int can_invert_lrclk;
- aifa = wm8580_read(codec, WM8580_PAIF1 + codec_dai->id);
- aifb = wm8580_read(codec, WM8580_PAIF3 + codec_dai->id);
+ aifa = snd_soc_read(codec, WM8580_PAIF1 + codec_dai->id);
+ aifb = snd_soc_read(codec, WM8580_PAIF3 + codec_dai->id);
aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
@@ -646,8 +585,8 @@
return -EINVAL;
}
- wm8580_write(codec, WM8580_PAIF1 + codec_dai->id, aifa);
- wm8580_write(codec, WM8580_PAIF3 + codec_dai->id, aifb);
+ snd_soc_write(codec, WM8580_PAIF1 + codec_dai->id, aifa);
+ snd_soc_write(codec, WM8580_PAIF3 + codec_dai->id, aifb);
return 0;
}
@@ -660,7 +599,7 @@
switch (div_id) {
case WM8580_MCLK:
- reg = wm8580_read(codec, WM8580_PLLB4);
+ reg = snd_soc_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
switch (div) {
@@ -682,11 +621,11 @@
default:
return -EINVAL;
}
- wm8580_write(codec, WM8580_PLLB4, reg);
+ snd_soc_write(codec, WM8580_PLLB4, reg);
break;
case WM8580_DAC_CLKSEL:
- reg = wm8580_read(codec, WM8580_CLKSEL);
+ reg = snd_soc_read(codec, WM8580_CLKSEL);
reg &= ~WM8580_CLKSEL_DAC_CLKSEL_MASK;
switch (div) {
@@ -704,11 +643,11 @@
default:
return -EINVAL;
}
- wm8580_write(codec, WM8580_CLKSEL, reg);
+ snd_soc_write(codec, WM8580_CLKSEL, reg);
break;
case WM8580_CLKOUTSRC:
- reg = wm8580_read(codec, WM8580_PLLB4);
+ reg = snd_soc_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
switch (div) {
@@ -730,7 +669,7 @@
default:
return -EINVAL;
}
- wm8580_write(codec, WM8580_PLLB4, reg);
+ snd_soc_write(codec, WM8580_PLLB4, reg);
break;
default:
@@ -745,14 +684,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm8580_read(codec, WM8580_DAC_CONTROL5);
+ reg = snd_soc_read(codec, WM8580_DAC_CONTROL5);
if (mute)
reg |= WM8580_DAC_CONTROL5_MUTEALL;
else
reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
- wm8580_write(codec, WM8580_DAC_CONTROL5, reg);
+ snd_soc_write(codec, WM8580_DAC_CONTROL5, reg);
return 0;
}
@@ -769,20 +708,20 @@
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Power up and get individual control of the DACs */
- reg = wm8580_read(codec, WM8580_PWRDN1);
+ reg = snd_soc_read(codec, WM8580_PWRDN1);
reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD);
- wm8580_write(codec, WM8580_PWRDN1, reg);
+ snd_soc_write(codec, WM8580_PWRDN1, reg);
/* Make VMID high impedence */
- reg = wm8580_read(codec, WM8580_ADC_CONTROL1);
+ reg = snd_soc_read(codec, WM8580_ADC_CONTROL1);
reg &= ~0x100;
- wm8580_write(codec, WM8580_ADC_CONTROL1, reg);
+ snd_soc_write(codec, WM8580_ADC_CONTROL1, reg);
}
break;
case SND_SOC_BIAS_OFF:
- reg = wm8580_read(codec, WM8580_PWRDN1);
- wm8580_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
+ reg = snd_soc_read(codec, WM8580_PWRDN1);
+ snd_soc_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
break;
}
codec->bias_level = level;
@@ -893,7 +832,8 @@
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8580);
-static int wm8580_register(struct wm8580_priv *wm8580)
+static int wm8580_register(struct wm8580_priv *wm8580,
+ enum snd_soc_control_type control)
{
int ret, i;
struct snd_soc_codec *codec = &wm8580->codec;
@@ -911,8 +851,6 @@
codec->private_data = wm8580;
codec->name = "WM8580";
codec->owner = THIS_MODULE;
- codec->read = wm8580_read_reg_cache;
- codec->write = wm8580_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8580_set_bias_level;
codec->dai = wm8580_dai;
@@ -922,11 +860,34 @@
memcpy(codec->reg_cache, wm8580_reg, sizeof(wm8580_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8580->supplies); i++)
+ wm8580->supplies[i].supply = wm8580_supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8580->supplies),
+ wm8580->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+ goto err;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8580->supplies),
+ wm8580->supplies);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_regulator_get;
+ }
+
/* Get the codec into a known state */
- ret = wm8580_write(codec, WM8580_RESET, 0);
+ ret = snd_soc_write(codec, WM8580_RESET, 0);
if (ret != 0) {
dev_err(codec->dev, "Failed to reset codec: %d\n", ret);
- goto err;
+ goto err_regulator_enable;
}
for (i = 0; i < ARRAY_SIZE(wm8580_dai); i++)
@@ -939,7 +900,7 @@
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- goto err;
+ goto err_regulator_enable;
}
ret = snd_soc_register_dais(wm8580_dai, ARRAY_SIZE(wm8580_dai));
@@ -952,6 +913,10 @@
err_codec:
snd_soc_unregister_codec(codec);
+err_regulator_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
+err_regulator_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
err:
kfree(wm8580);
return ret;
@@ -962,6 +927,8 @@
wm8580_set_bias_level(&wm8580->codec, SND_SOC_BIAS_OFF);
snd_soc_unregister_dais(wm8580_dai, ARRAY_SIZE(wm8580_dai));
snd_soc_unregister_codec(&wm8580->codec);
+ regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
+ regulator_bulk_free(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
kfree(wm8580);
wm8580_codec = NULL;
}
@@ -978,14 +945,13 @@
return -ENOMEM;
codec = &wm8580->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8580);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8580_register(wm8580);
+ return wm8580_register(wm8580, SND_SOC_I2C);
}
static int wm8580_i2c_remove(struct i2c_client *client)
@@ -995,6 +961,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8580_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8580_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8580_i2c_suspend NULL
+#define wm8580_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8580_i2c_id[] = {
{ "wm8580", 0 },
{ }
@@ -1008,6 +989,8 @@
},
.probe = wm8580_i2c_probe,
.remove = wm8580_i2c_remove,
+ .suspend = wm8580_i2c_suspend,
+ .resume = wm8580_i2c_resume,
.id_table = wm8580_i2c_id,
};
#endif
diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c
index e7ff212..16e969a 100644
--- a/sound/soc/codecs/wm8728.c
+++ b/sound/soc/codecs/wm8728.c
@@ -43,45 +43,6 @@
0x100,
};
-static inline unsigned int wm8728_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8728_reg_defaults));
- return cache[reg];
-}
-
-static inline void wm8728_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8728_reg_defaults));
- cache[reg] = value;
-}
-
-/*
- * write to the WM8728 register space
- */
-static int wm8728_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8728 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8728_write_reg_cache(codec, reg, value);
-
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
static const DECLARE_TLV_DB_SCALE(wm8728_tlv, -12750, 50, 1);
static const struct snd_kcontrol_new wm8728_snd_controls[] = {
@@ -121,12 +82,12 @@
static int wm8728_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+ u16 mute_reg = snd_soc_read(codec, WM8728_DACCTL);
if (mute)
- wm8728_write(codec, WM8728_DACCTL, mute_reg | 1);
+ snd_soc_write(codec, WM8728_DACCTL, mute_reg | 1);
else
- wm8728_write(codec, WM8728_DACCTL, mute_reg & ~1);
+ snd_soc_write(codec, WM8728_DACCTL, mute_reg & ~1);
return 0;
}
@@ -138,7 +99,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 dac = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+ u16 dac = snd_soc_read(codec, WM8728_DACCTL);
dac &= ~0x18;
@@ -155,7 +116,7 @@
return -EINVAL;
}
- wm8728_write(codec, WM8728_DACCTL, dac);
+ snd_soc_write(codec, WM8728_DACCTL, dac);
return 0;
}
@@ -164,7 +125,7 @@
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 iface = wm8728_read_reg_cache(codec, WM8728_IFCTL);
+ u16 iface = snd_soc_read(codec, WM8728_IFCTL);
/* Currently only I2S is supported by the driver, though the
* hardware is more flexible.
@@ -204,7 +165,7 @@
return -EINVAL;
}
- wm8728_write(codec, WM8728_IFCTL, iface);
+ snd_soc_write(codec, WM8728_IFCTL, iface);
return 0;
}
@@ -220,19 +181,19 @@
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Power everything up... */
- reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
- wm8728_write(codec, WM8728_DACCTL, reg & ~0x4);
+ reg = snd_soc_read(codec, WM8728_DACCTL);
+ snd_soc_write(codec, WM8728_DACCTL, reg & ~0x4);
/* ..then sync in the register cache. */
for (i = 0; i < ARRAY_SIZE(wm8728_reg_defaults); i++)
- wm8728_write(codec, i,
- wm8728_read_reg_cache(codec, i));
+ snd_soc_write(codec, i,
+ snd_soc_read(codec, i));
}
break;
case SND_SOC_BIAS_OFF:
- reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
- wm8728_write(codec, WM8728_DACCTL, reg | 0x4);
+ reg = snd_soc_read(codec, WM8728_DACCTL);
+ snd_soc_write(codec, WM8728_DACCTL, reg | 0x4);
break;
}
codec->bias_level = level;
@@ -287,15 +248,14 @@
* initialise the WM8728 driver
* register the mixer and dsp interfaces with the kernel
*/
-static int wm8728_init(struct snd_soc_device *socdev)
+static int wm8728_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int ret = 0;
codec->name = "WM8728";
codec->owner = THIS_MODULE;
- codec->read = wm8728_read_reg_cache;
- codec->write = wm8728_write;
codec->set_bias_level = wm8728_set_bias_level;
codec->dai = &wm8728_dai;
codec->num_dai = 1;
@@ -307,11 +267,18 @@
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8728: failed to configure cache I/O: %d\n",
+ ret);
+ goto err;
+ }
+
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8728: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* power on device */
@@ -331,7 +298,7 @@
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
@@ -357,7 +324,7 @@
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = wm8728_init(socdev);
+ ret = wm8728_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8728\n");
@@ -437,7 +404,7 @@
codec->control_data = spi;
- ret = wm8728_init(socdev);
+ ret = wm8728_init(socdev, SND_SOC_SPI);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8728\n");
@@ -458,30 +425,6 @@
.probe = wm8728_spi_probe,
.remove = __devexit_p(wm8728_spi_remove),
};
-
-static int wm8728_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif /* CONFIG_SPI_MASTER */
static int wm8728_probe(struct platform_device *pdev)
@@ -506,13 +449,11 @@
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8728_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8728_spi_write;
ret = spi_register_driver(&wm8728_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 7a20587..d3fd4f2 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -26,6 +26,7 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
+#include <sound/tlv.h>
#include "wm8731.h"
@@ -39,9 +40,6 @@
unsigned int sysclk;
};
-#ifdef CONFIG_SPI_MASTER
-static int wm8731_spi_write(struct spi_device *spi, const char *data, int len);
-#endif
/*
* wm8731 register cache
@@ -50,60 +48,12 @@
* There is no point in caching the reset register
*/
static const u16 wm8731_reg[WM8731_CACHEREGNUM] = {
- 0x0097, 0x0097, 0x0079, 0x0079,
- 0x000a, 0x0008, 0x009f, 0x000a,
- 0x0000, 0x0000
+ 0x0097, 0x0097, 0x0079, 0x0079,
+ 0x000a, 0x0008, 0x009f, 0x000a,
+ 0x0000, 0x0000
};
-/*
- * read wm8731 register cache
- */
-static inline unsigned int wm8731_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg == WM8731_RESET)
- return 0;
- if (reg >= WM8731_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8731 register cache
- */
-static inline void wm8731_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= WM8731_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-/*
- * write to the WM8731 register space
- */
-static int wm8731_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8731 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8731_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8731_reset(c) wm8731_write(c, WM8731_RESET, 0)
+#define wm8731_reset(c) snd_soc_write(c, WM8731_RESET, 0)
static const char *wm8731_input_select[] = {"Line In", "Mic"};
static const char *wm8731_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
@@ -113,20 +63,26 @@
SOC_ENUM_SINGLE(WM8731_APDIGI, 1, 4, wm8731_deemph),
};
+static const DECLARE_TLV_DB_SCALE(in_tlv, -3450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -1500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+
static const struct snd_kcontrol_new wm8731_snd_controls[] = {
-SOC_DOUBLE_R("Master Playback Volume", WM8731_LOUT1V, WM8731_ROUT1V,
- 0, 127, 0),
+SOC_DOUBLE_R_TLV("Master Playback Volume", WM8731_LOUT1V, WM8731_ROUT1V,
+ 0, 127, 0, out_tlv),
SOC_DOUBLE_R("Master Playback ZC Switch", WM8731_LOUT1V, WM8731_ROUT1V,
7, 1, 0),
-SOC_DOUBLE_R("Capture Volume", WM8731_LINVOL, WM8731_RINVOL, 0, 31, 0),
+SOC_DOUBLE_R_TLV("Capture Volume", WM8731_LINVOL, WM8731_RINVOL, 0, 31, 0,
+ in_tlv),
SOC_DOUBLE_R("Line Capture Switch", WM8731_LINVOL, WM8731_RINVOL, 7, 1, 1),
SOC_SINGLE("Mic Boost (+20dB)", WM8731_APANA, 0, 1, 0),
-SOC_SINGLE("Capture Mic Switch", WM8731_APANA, 1, 1, 1),
+SOC_SINGLE("Mic Capture Switch", WM8731_APANA, 1, 1, 1),
-SOC_SINGLE("Sidetone Playback Volume", WM8731_APANA, 6, 3, 1),
+SOC_SINGLE_TLV("Sidetone Playback Volume", WM8731_APANA, 6, 3, 1,
+ sidetone_tlv),
SOC_SINGLE("ADC High Pass Filter Switch", WM8731_APDIGI, 0, 1, 1),
SOC_SINGLE("Store DC Offset Switch", WM8731_APDIGI, 4, 1, 0),
@@ -260,12 +216,12 @@
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8731_priv *wm8731 = codec->private_data;
- u16 iface = wm8731_read_reg_cache(codec, WM8731_IFACE) & 0xfff3;
+ u16 iface = snd_soc_read(codec, WM8731_IFACE) & 0xfff3;
int i = get_coeff(wm8731->sysclk, params_rate(params));
u16 srate = (coeff_div[i].sr << 2) |
(coeff_div[i].bosr << 1) | coeff_div[i].usb;
- wm8731_write(codec, WM8731_SRATE, srate);
+ snd_soc_write(codec, WM8731_SRATE, srate);
/* bit size */
switch (params_format(params)) {
@@ -279,7 +235,7 @@
break;
}
- wm8731_write(codec, WM8731_IFACE, iface);
+ snd_soc_write(codec, WM8731_IFACE, iface);
return 0;
}
@@ -291,7 +247,7 @@
struct snd_soc_codec *codec = socdev->card->codec;
/* set active */
- wm8731_write(codec, WM8731_ACTIVE, 0x0001);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0001);
return 0;
}
@@ -306,19 +262,19 @@
/* deactivate */
if (!codec->active) {
udelay(50);
- wm8731_write(codec, WM8731_ACTIVE, 0x0);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0);
}
}
static int wm8731_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8731_read_reg_cache(codec, WM8731_APDIGI) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8731_APDIGI) & 0xfff7;
if (mute)
- wm8731_write(codec, WM8731_APDIGI, mute_reg | 0x8);
+ snd_soc_write(codec, WM8731_APDIGI, mute_reg | 0x8);
else
- wm8731_write(codec, WM8731_APDIGI, mute_reg);
+ snd_soc_write(codec, WM8731_APDIGI, mute_reg);
return 0;
}
@@ -396,7 +352,7 @@
}
/* set iface */
- wm8731_write(codec, WM8731_IFACE, iface);
+ snd_soc_write(codec, WM8731_IFACE, iface);
return 0;
}
@@ -412,12 +368,12 @@
break;
case SND_SOC_BIAS_STANDBY:
/* Clear PWROFF, gate CLKOUT, everything else as-is */
- reg = wm8731_read_reg_cache(codec, WM8731_PWR) & 0xff7f;
- wm8731_write(codec, WM8731_PWR, reg | 0x0040);
+ reg = snd_soc_read(codec, WM8731_PWR) & 0xff7f;
+ snd_soc_write(codec, WM8731_PWR, reg | 0x0040);
break;
case SND_SOC_BIAS_OFF:
- wm8731_write(codec, WM8731_ACTIVE, 0x0);
- wm8731_write(codec, WM8731_PWR, 0xffff);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0);
+ snd_soc_write(codec, WM8731_PWR, 0xffff);
break;
}
codec->bias_level = level;
@@ -457,15 +413,17 @@
.rates = WM8731_RATES,
.formats = WM8731_FORMATS,},
.ops = &wm8731_dai_ops,
+ .symmetric_rates = 1,
};
EXPORT_SYMBOL_GPL(wm8731_dai);
+#ifdef CONFIG_PM
static int wm8731_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
- wm8731_write(codec, WM8731_ACTIVE, 0x0);
+ snd_soc_write(codec, WM8731_ACTIVE, 0x0);
wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
@@ -488,6 +446,10 @@
wm8731_set_bias_level(codec, codec->suspend_bias_level);
return 0;
}
+#else
+#define wm8731_suspend NULL
+#define wm8731_resume NULL
+#endif
static int wm8731_probe(struct platform_device *pdev)
{
@@ -547,15 +509,16 @@
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8731);
-static int wm8731_register(struct wm8731_priv *wm8731)
+static int wm8731_register(struct wm8731_priv *wm8731,
+ enum snd_soc_control_type control)
{
int ret;
struct snd_soc_codec *codec = &wm8731->codec;
- u16 reg;
if (wm8731_codec) {
dev_err(codec->dev, "Another WM8731 is registered\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err;
}
mutex_init(&codec->mutex);
@@ -565,8 +528,6 @@
codec->private_data = wm8731;
codec->name = "WM8731";
codec->owner = THIS_MODULE;
- codec->read = wm8731_read_reg_cache;
- codec->write = wm8731_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8731_set_bias_level;
codec->dai = &wm8731_dai;
@@ -576,10 +537,16 @@
memcpy(codec->reg_cache, wm8731_reg, sizeof(wm8731_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
ret = wm8731_reset(codec);
if (ret < 0) {
- dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ goto err;
}
wm8731_dai.dev = codec->dev;
@@ -587,35 +554,36 @@
wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the update bits */
- reg = wm8731_read_reg_cache(codec, WM8731_LOUT1V);
- wm8731_write(codec, WM8731_LOUT1V, reg & ~0x0100);
- reg = wm8731_read_reg_cache(codec, WM8731_ROUT1V);
- wm8731_write(codec, WM8731_ROUT1V, reg & ~0x0100);
- reg = wm8731_read_reg_cache(codec, WM8731_LINVOL);
- wm8731_write(codec, WM8731_LINVOL, reg & ~0x0100);
- reg = wm8731_read_reg_cache(codec, WM8731_RINVOL);
- wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100);
+ snd_soc_update_bits(codec, WM8731_LOUT1V, 0x100, 0);
+ snd_soc_update_bits(codec, WM8731_ROUT1V, 0x100, 0);
+ snd_soc_update_bits(codec, WM8731_LINVOL, 0x100, 0);
+ snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
/* Disable bypass path by default */
- reg = wm8731_read_reg_cache(codec, WM8731_APANA);
- wm8731_write(codec, WM8731_APANA, reg & ~0x4);
+ snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
wm8731_codec = codec;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- return ret;
+ goto err;
}
ret = snd_soc_register_dai(&wm8731_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
- return ret;
+ goto err_codec;
}
return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8731);
+ return ret;
}
static void wm8731_unregister(struct wm8731_priv *wm8731)
@@ -628,30 +596,6 @@
}
#if defined(CONFIG_SPI_MASTER)
-static int wm8731_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
-
static int __devinit wm8731_spi_probe(struct spi_device *spi)
{
struct snd_soc_codec *codec;
@@ -663,12 +607,11 @@
codec = &wm8731->codec;
codec->control_data = spi;
- codec->hw_write = (hw_write_t)wm8731_spi_write;
codec->dev = &spi->dev;
dev_set_drvdata(&spi->dev, wm8731);
- return wm8731_register(wm8731);
+ return wm8731_register(wm8731, SND_SOC_SPI);
}
static int __devexit wm8731_spi_remove(struct spi_device *spi)
@@ -680,6 +623,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8731_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8731_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+#else
+#define wm8731_spi_suspend NULL
+#define wm8731_spi_resume NULL
+#endif
+
static struct spi_driver wm8731_spi_driver = {
.driver = {
.name = "wm8731",
@@ -687,6 +645,8 @@
.owner = THIS_MODULE,
},
.probe = wm8731_spi_probe,
+ .suspend = wm8731_spi_suspend,
+ .resume = wm8731_spi_resume,
.remove = __devexit_p(wm8731_spi_remove),
};
#endif /* CONFIG_SPI_MASTER */
@@ -703,14 +663,13 @@
return -ENOMEM;
codec = &wm8731->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8731);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8731_register(wm8731);
+ return wm8731_register(wm8731, SND_SOC_I2C);
}
static __devexit int wm8731_i2c_remove(struct i2c_client *client)
@@ -720,6 +679,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8731_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&i2c->dev);
+}
+
+static int wm8731_i2c_resume(struct i2c_client *i2c)
+{
+ return snd_soc_resume_device(&i2c->dev);
+}
+#else
+#define wm8731_i2c_suspend NULL
+#define wm8731_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8731_i2c_id[] = {
{ "wm8731", 0 },
{ }
@@ -733,6 +707,8 @@
},
.probe = wm8731_i2c_probe,
.remove = __devexit_p(wm8731_i2c_remove),
+ .suspend = wm8731_i2c_suspend,
+ .resume = wm8731_i2c_resume,
.id_table = wm8731_i2c_id,
};
#endif
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index b64509b..4ba1e7e 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -55,50 +55,7 @@
0x0079, 0x0079, 0x0079, /* 40 */
};
-/*
- * read wm8750 register cache
- */
-static inline unsigned int wm8750_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8750_CACHE_REGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8750 register cache
- */
-static inline void wm8750_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8750_CACHE_REGNUM)
- return;
- cache[reg] = value;
-}
-
-static int wm8750_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8750_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8750_reset(c) wm8750_write(c, WM8750_RESET, 0)
+#define wm8750_reset(c) snd_soc_write(c, WM8750_RESET, 0)
/*
* WM8750 Controls
@@ -594,7 +551,7 @@
return -EINVAL;
}
- wm8750_write(codec, WM8750_IFACE, iface);
+ snd_soc_write(codec, WM8750_IFACE, iface);
return 0;
}
@@ -606,8 +563,8 @@
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8750_priv *wm8750 = codec->private_data;
- u16 iface = wm8750_read_reg_cache(codec, WM8750_IFACE) & 0x1f3;
- u16 srate = wm8750_read_reg_cache(codec, WM8750_SRATE) & 0x1c0;
+ u16 iface = snd_soc_read(codec, WM8750_IFACE) & 0x1f3;
+ u16 srate = snd_soc_read(codec, WM8750_SRATE) & 0x1c0;
int coeff = get_coeff(wm8750->sysclk, params_rate(params));
/* bit size */
@@ -626,9 +583,9 @@
}
/* set iface & srate */
- wm8750_write(codec, WM8750_IFACE, iface);
+ snd_soc_write(codec, WM8750_IFACE, iface);
if (coeff >= 0)
- wm8750_write(codec, WM8750_SRATE, srate |
+ snd_soc_write(codec, WM8750_SRATE, srate |
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
@@ -637,35 +594,35 @@
static int wm8750_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8750_read_reg_cache(codec, WM8750_ADCDAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8750_ADCDAC) & 0xfff7;
if (mute)
- wm8750_write(codec, WM8750_ADCDAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8750_ADCDAC, mute_reg | 0x8);
else
- wm8750_write(codec, WM8750_ADCDAC, mute_reg);
+ snd_soc_write(codec, WM8750_ADCDAC, mute_reg);
return 0;
}
static int wm8750_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8750_read_reg_cache(codec, WM8750_PWR1) & 0xfe3e;
+ u16 pwr_reg = snd_soc_read(codec, WM8750_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x00c0);
+ snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x00c0);
break;
case SND_SOC_BIAS_PREPARE:
/* set vmid to 5k for quick power up */
- wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x01c1);
+ snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x01c1);
break;
case SND_SOC_BIAS_STANDBY:
/* mute dac and set vmid to 500k, enable VREF */
- wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x0141);
+ snd_soc_write(codec, WM8750_PWR1, pwr_reg | 0x0141);
break;
case SND_SOC_BIAS_OFF:
- wm8750_write(codec, WM8750_PWR1, 0x0001);
+ snd_soc_write(codec, WM8750_PWR1, 0x0001);
break;
}
codec->bias_level = level;
@@ -754,15 +711,14 @@
* initialise the WM8750 driver
* register the mixer and dsp interfaces with the kernel
*/
-static int wm8750_init(struct snd_soc_device *socdev)
+static int wm8750_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int reg, ret = 0;
codec->name = "WM8750";
codec->owner = THIS_MODULE;
- codec->read = wm8750_read_reg_cache;
- codec->write = wm8750_write;
codec->set_bias_level = wm8750_set_bias_level;
codec->dai = &wm8750_dai;
codec->num_dai = 1;
@@ -771,13 +727,23 @@
if (codec->reg_cache == NULL)
return -ENOMEM;
- wm8750_reset(codec);
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8750: failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm8750_reset(codec);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8750: failed to reset: %d\n", ret);
+ goto err;
+ }
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8750: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* charge output caps */
@@ -786,22 +752,22 @@
schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(1000));
/* set the update bits */
- reg = wm8750_read_reg_cache(codec, WM8750_LDAC);
- wm8750_write(codec, WM8750_LDAC, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_RDAC);
- wm8750_write(codec, WM8750_RDAC, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_LOUT1V);
- wm8750_write(codec, WM8750_LOUT1V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_ROUT1V);
- wm8750_write(codec, WM8750_ROUT1V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_LOUT2V);
- wm8750_write(codec, WM8750_LOUT2V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_ROUT2V);
- wm8750_write(codec, WM8750_ROUT2V, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_LINVOL);
- wm8750_write(codec, WM8750_LINVOL, reg | 0x0100);
- reg = wm8750_read_reg_cache(codec, WM8750_RINVOL);
- wm8750_write(codec, WM8750_RINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LDAC);
+ snd_soc_write(codec, WM8750_LDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_RDAC);
+ snd_soc_write(codec, WM8750_RDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LOUT1V);
+ snd_soc_write(codec, WM8750_LOUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_ROUT1V);
+ snd_soc_write(codec, WM8750_ROUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LOUT2V);
+ snd_soc_write(codec, WM8750_LOUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_ROUT2V);
+ snd_soc_write(codec, WM8750_ROUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_LINVOL);
+ snd_soc_write(codec, WM8750_LINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8750_RINVOL);
+ snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
snd_soc_add_controls(codec, wm8750_snd_controls,
ARRAY_SIZE(wm8750_snd_controls));
@@ -816,7 +782,7 @@
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
@@ -844,7 +810,7 @@
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = wm8750_init(socdev);
+ ret = wm8750_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8750\n");
@@ -924,7 +890,7 @@
codec->control_data = spi;
- ret = wm8750_init(socdev);
+ ret = wm8750_init(socdev, SND_SOC_SPI);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8750\n");
@@ -945,30 +911,6 @@
.probe = wm8750_spi_probe,
.remove = __devexit_p(wm8750_spi_remove),
};
-
-static int wm8750_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif
static int wm8750_probe(struct platform_device *pdev)
@@ -1002,13 +944,11 @@
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8750_add_i2c_device(pdev, setup);
}
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8750_spi_write;
ret = spi_register_driver(&wm8750_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 49c4b28..d80d414 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1766,6 +1766,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8753_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8753_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8753_i2c_suspend NULL
+#define wm8753_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8753_i2c_id[] = {
{ "wm8753", 0 },
{ }
@@ -1779,6 +1794,8 @@
},
.probe = wm8753_i2c_probe,
.remove = wm8753_i2c_remove,
+ .suspend = wm8753_i2c_suspend,
+ .resume = wm8753_i2c_resume,
.id_table = wm8753_i2c_id,
};
#endif
@@ -1834,6 +1851,22 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8753_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8753_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+
+#else
+#define wm8753_spi_suspend NULL
+#define wm8753_spi_resume NULL
+#endif
+
static struct spi_driver wm8753_spi_driver = {
.driver = {
.name = "wm8753",
@@ -1842,6 +1875,8 @@
},
.probe = wm8753_spi_probe,
.remove = __devexit_p(wm8753_spi_remove),
+ .suspend = wm8753_spi_suspend,
+ .resume = wm8753_spi_resume,
};
#endif
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
new file mode 100644
index 0000000..a9829aa
--- /dev/null
+++ b/sound/soc/codecs/wm8776.c
@@ -0,0 +1,744 @@
+/*
+ * wm8776.c -- WM8776 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Input ALC/limiter support
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8776.h"
+
+static struct snd_soc_codec *wm8776_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8776;
+
+/* codec private data */
+struct wm8776_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8776_CACHEREGNUM];
+ int sysclk[2];
+};
+
+#ifdef CONFIG_SPI_MASTER
+static int wm8776_spi_write(struct spi_device *spi, const char *data, int len);
+#endif
+
+static const u16 wm8776_reg[WM8776_CACHEREGNUM] = {
+ 0x79, 0x79, 0x79, 0xff, 0xff, /* 4 */
+ 0xff, 0x00, 0x90, 0x00, 0x00, /* 9 */
+ 0x22, 0x22, 0x22, 0x08, 0xcf, /* 14 */
+ 0xcf, 0x7b, 0x00, 0x32, 0x00, /* 19 */
+ 0xa6, 0x01, 0x01
+};
+
+static int wm8776_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8776_RESET, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(hp_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -10350, 50, 1);
+
+static const struct snd_kcontrol_new wm8776_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8776_HPLVOL, WM8776_HPRVOL,
+ 0, 127, 0, hp_tlv),
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8776_DACLVOL, WM8776_DACRVOL,
+ 0, 255, 0, dac_tlv),
+SOC_SINGLE("Digital Playback ZC Switch", WM8776_DACCTRL1, 0, 1, 0),
+
+SOC_SINGLE("Deemphasis Switch", WM8776_DACCTRL2, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Volume", WM8776_ADCLVOL, WM8776_ADCRVOL,
+ 0, 255, 0, adc_tlv),
+SOC_DOUBLE("Capture Switch", WM8776_ADCMUX, 7, 6, 1, 1),
+SOC_DOUBLE_R("Capture ZC Switch", WM8776_ADCLVOL, WM8776_ADCRVOL, 8, 1, 0),
+SOC_SINGLE("Capture HPF Switch", WM8776_ADCIFCTRL, 8, 1, 1),
+};
+
+static const struct snd_kcontrol_new inmix_controls[] = {
+SOC_DAPM_SINGLE("AIN1 Switch", WM8776_ADCMUX, 0, 1, 0),
+SOC_DAPM_SINGLE("AIN2 Switch", WM8776_ADCMUX, 1, 1, 0),
+SOC_DAPM_SINGLE("AIN3 Switch", WM8776_ADCMUX, 2, 1, 0),
+SOC_DAPM_SINGLE("AIN4 Switch", WM8776_ADCMUX, 3, 1, 0),
+SOC_DAPM_SINGLE("AIN5 Switch", WM8776_ADCMUX, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new outmix_controls[] = {
+SOC_DAPM_SINGLE("DAC Switch", WM8776_OUTMUX, 0, 1, 0),
+SOC_DAPM_SINGLE("AUX Switch", WM8776_OUTMUX, 1, 1, 0),
+SOC_DAPM_SINGLE("Bypass Switch", WM8776_OUTMUX, 2, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("AUX"),
+SND_SOC_DAPM_INPUT("AUX"),
+
+SND_SOC_DAPM_INPUT("AIN1"),
+SND_SOC_DAPM_INPUT("AIN2"),
+SND_SOC_DAPM_INPUT("AIN3"),
+SND_SOC_DAPM_INPUT("AIN4"),
+SND_SOC_DAPM_INPUT("AIN5"),
+
+SND_SOC_DAPM_MIXER("Input Mixer", WM8776_PWRDOWN, 6, 1,
+ inmix_controls, ARRAY_SIZE(inmix_controls)),
+
+SND_SOC_DAPM_ADC("ADC", "Capture", WM8776_PWRDOWN, 1, 1),
+SND_SOC_DAPM_DAC("DAC", "Playback", WM8776_PWRDOWN, 2, 1),
+
+SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0,
+ outmix_controls, ARRAY_SIZE(outmix_controls)),
+
+SND_SOC_DAPM_PGA("Headphone PGA", WM8776_PWRDOWN, 3, 1, NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("VOUT"),
+
+SND_SOC_DAPM_OUTPUT("HPOUTL"),
+SND_SOC_DAPM_OUTPUT("HPOUTR"),
+};
+
+static const struct snd_soc_dapm_route routes[] = {
+ { "Input Mixer", "AIN1 Switch", "AIN1" },
+ { "Input Mixer", "AIN2 Switch", "AIN2" },
+ { "Input Mixer", "AIN3 Switch", "AIN3" },
+ { "Input Mixer", "AIN4 Switch", "AIN4" },
+ { "Input Mixer", "AIN5 Switch", "AIN5" },
+
+ { "ADC", NULL, "Input Mixer" },
+
+ { "Output Mixer", "DAC Switch", "DAC" },
+ { "Output Mixer", "AUX Switch", "AUX" },
+ { "Output Mixer", "Bypass Switch", "Input Mixer" },
+
+ { "VOUT", NULL, "Output Mixer" },
+
+ { "Headphone PGA", NULL, "Output Mixer" },
+
+ { "HPOUTL", NULL, "Headphone PGA" },
+ { "HPOUTR", NULL, "Headphone PGA" },
+};
+
+static int wm8776_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ int reg, iface, master;
+
+ switch (dai->id) {
+ case WM8776_DAI_DAC:
+ reg = WM8776_DACIFCTRL;
+ master = 0x80;
+ break;
+ case WM8776_DAI_ADC:
+ reg = WM8776_ADCIFCTRL;
+ master = 0x100;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ iface = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ master = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 0x0002;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= 0x0001;
+ break;
+ /* FIXME: CHECK A/B */
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= 0x0003;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ iface |= 0x0007;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= 0x00c;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= 0x008;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= 0x004;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Finally, write out the values */
+ snd_soc_update_bits(codec, reg, 0xf, iface);
+ snd_soc_update_bits(codec, WM8776_MSTRCTRL, 0x180, master);
+
+ return 0;
+}
+
+static int mclk_ratios[] = {
+ 128,
+ 192,
+ 256,
+ 384,
+ 512,
+ 768,
+};
+
+static int wm8776_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8776_priv *wm8776 = codec->private_data;
+ int iface_reg, iface;
+ int ratio_shift, master;
+ int i;
+
+ iface = 0;
+
+ switch (dai->id) {
+ case WM8776_DAI_DAC:
+ iface_reg = WM8776_DACIFCTRL;
+ master = 0x80;
+ ratio_shift = 4;
+ break;
+ case WM8776_DAI_ADC:
+ iface_reg = WM8776_ADCIFCTRL;
+ master = 0x100;
+ ratio_shift = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ /* Set word length */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface |= 0x20;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ iface |= 0x30;
+ break;
+ }
+
+ /* Only need to set MCLK/LRCLK ratio if we're master */
+ if (snd_soc_read(codec, WM8776_MSTRCTRL) & master) {
+ for (i = 0; i < ARRAY_SIZE(mclk_ratios); i++) {
+ if (wm8776->sysclk[dai->id] / params_rate(params)
+ == mclk_ratios[i])
+ break;
+ }
+
+ if (i == ARRAY_SIZE(mclk_ratios)) {
+ dev_err(codec->dev,
+ "Unable to configure MCLK ratio %d/%d\n",
+ wm8776->sysclk[dai->id], params_rate(params));
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "MCLK is %dfs\n", mclk_ratios[i]);
+
+ snd_soc_update_bits(codec, WM8776_MSTRCTRL,
+ 0x7 << ratio_shift, i << ratio_shift);
+ } else {
+ dev_dbg(codec->dev, "DAI in slave mode\n");
+ }
+
+ snd_soc_update_bits(codec, iface_reg, 0x30, iface);
+
+ return 0;
+}
+
+static int wm8776_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ return snd_soc_write(codec, WM8776_DACMUTE, !!mute);
+}
+
+static int wm8776_set_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8776_priv *wm8776 = codec->private_data;
+
+ BUG_ON(dai->id >= ARRAY_SIZE(wm8776->sysclk));
+
+ wm8776->sysclk[dai->id] = freq;
+
+ return 0;
+}
+
+static int wm8776_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Disable the global powerdown; DAPM does the rest */
+ snd_soc_update_bits(codec, WM8776_PWRDOWN, 1, 0);
+ }
+
+ break;
+ case SND_SOC_BIAS_OFF:
+ snd_soc_update_bits(codec, WM8776_PWRDOWN, 1, 1);
+ break;
+ }
+
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8776_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
+ SNDRV_PCM_RATE_96000)
+
+
+#define WM8776_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8776_dac_ops = {
+ .digital_mute = wm8776_mute,
+ .hw_params = wm8776_hw_params,
+ .set_fmt = wm8776_set_fmt,
+ .set_sysclk = wm8776_set_sysclk,
+};
+
+static struct snd_soc_dai_ops wm8776_adc_ops = {
+ .hw_params = wm8776_hw_params,
+ .set_fmt = wm8776_set_fmt,
+ .set_sysclk = wm8776_set_sysclk,
+};
+
+struct snd_soc_dai wm8776_dai[] = {
+ {
+ .name = "WM8776 Playback",
+ .id = WM8776_DAI_DAC,
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8776_RATES,
+ .formats = WM8776_FORMATS,
+ },
+ .ops = &wm8776_dac_ops,
+ },
+ {
+ .name = "WM8776 Capture",
+ .id = WM8776_DAI_ADC,
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8776_RATES,
+ .formats = WM8776_FORMATS,
+ },
+ .ops = &wm8776_adc_ops,
+ },
+};
+EXPORT_SYMBOL_GPL(wm8776_dai);
+
+#ifdef CONFIG_PM
+static int wm8776_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8776_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8776_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ int i;
+ u8 data[2];
+ u16 *cache = codec->reg_cache;
+
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(wm8776_reg); i++) {
+ data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+ data[1] = cache[i] & 0x00ff;
+ codec->hw_write(codec->control_data, data, 2);
+ }
+
+ wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8776_suspend NULL
+#define wm8776_resume NULL
+#endif
+
+static int wm8776_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8776_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8776_codec;
+ codec = wm8776_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8776_snd_controls,
+ ARRAY_SIZE(wm8776_snd_controls));
+ snd_soc_dapm_new_controls(codec, wm8776_dapm_widgets,
+ ARRAY_SIZE(wm8776_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int wm8776_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8776 = {
+ .probe = wm8776_probe,
+ .remove = wm8776_remove,
+ .suspend = wm8776_suspend,
+ .resume = wm8776_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8776);
+
+static int wm8776_register(struct wm8776_priv *wm8776,
+ enum snd_soc_control_type control)
+{
+ int ret, i;
+ struct snd_soc_codec *codec = &wm8776->codec;
+
+ if (wm8776_codec) {
+ dev_err(codec->dev, "Another WM8776 is registered\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8776;
+ codec->name = "WM8776";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8776_set_bias_level;
+ codec->dai = wm8776_dai;
+ codec->num_dai = ARRAY_SIZE(wm8776_dai);
+ codec->reg_cache_size = WM8776_CACHEREGNUM;
+ codec->reg_cache = &wm8776->reg_cache;
+
+ memcpy(codec->reg_cache, wm8776_reg, sizeof(wm8776_reg));
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8776_dai); i++)
+ wm8776_dai[i].dev = codec->dev;
+
+ ret = wm8776_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+ goto err;
+ }
+
+ wm8776_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Latch the update bits; right channel only since we always
+ * update both. */
+ snd_soc_update_bits(codec, WM8776_HPRVOL, 0x100, 0x100);
+ snd_soc_update_bits(codec, WM8776_DACRVOL, 0x100, 0x100);
+
+ wm8776_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dais(wm8776_dai, ARRAY_SIZE(wm8776_dai));
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8776);
+ return ret;
+}
+
+static void wm8776_unregister(struct wm8776_priv *wm8776)
+{
+ wm8776_set_bias_level(&wm8776->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dais(wm8776_dai, ARRAY_SIZE(wm8776_dai));
+ snd_soc_unregister_codec(&wm8776->codec);
+ kfree(wm8776);
+ wm8776_codec = NULL;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int wm8776_spi_write(struct spi_device *spi, const char *data, int len)
+{
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+
+static int __devinit wm8776_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_codec *codec;
+ struct wm8776_priv *wm8776;
+
+ wm8776 = kzalloc(sizeof(struct wm8776_priv), GFP_KERNEL);
+ if (wm8776 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8776->codec;
+ codec->control_data = spi;
+ codec->hw_write = (hw_write_t)wm8776_spi_write;
+ codec->dev = &spi->dev;
+
+ dev_set_drvdata(&spi->dev, wm8776);
+
+ return wm8776_register(wm8776, SND_SOC_SPI);
+}
+
+static int __devexit wm8776_spi_remove(struct spi_device *spi)
+{
+ struct wm8776_priv *wm8776 = dev_get_drvdata(&spi->dev);
+
+ wm8776_unregister(wm8776);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8776_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8776_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+#else
+#define wm8776_spi_suspend NULL
+#define wm8776_spi_resume NULL
+#endif
+
+static struct spi_driver wm8776_spi_driver = {
+ .driver = {
+ .name = "wm8776",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8776_spi_probe,
+ .suspend = wm8776_spi_suspend,
+ .resume = wm8776_spi_resume,
+ .remove = __devexit_p(wm8776_spi_remove),
+};
+#endif /* CONFIG_SPI_MASTER */
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8776_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8776_priv *wm8776;
+ struct snd_soc_codec *codec;
+
+ wm8776 = kzalloc(sizeof(struct wm8776_priv), GFP_KERNEL);
+ if (wm8776 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8776->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8776);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8776_register(wm8776, SND_SOC_I2C);
+}
+
+static __devexit int wm8776_i2c_remove(struct i2c_client *client)
+{
+ struct wm8776_priv *wm8776 = i2c_get_clientdata(client);
+ wm8776_unregister(wm8776);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8776_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&i2c->dev);
+}
+
+static int wm8776_i2c_resume(struct i2c_client *i2c)
+{
+ return snd_soc_resume_device(&i2c->dev);
+}
+#else
+#define wm8776_i2c_suspend NULL
+#define wm8776_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8776_i2c_id[] = {
+ { "wm8776", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8776_i2c_id);
+
+static struct i2c_driver wm8776_i2c_driver = {
+ .driver = {
+ .name = "wm8776",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8776_i2c_probe,
+ .remove = __devexit_p(wm8776_i2c_remove),
+ .suspend = wm8776_i2c_suspend,
+ .resume = wm8776_i2c_resume,
+ .id_table = wm8776_i2c_id,
+};
+#endif
+
+static int __init wm8776_modinit(void)
+{
+ int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8776_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8776 I2C driver: %d\n",
+ ret);
+ }
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ ret = spi_register_driver(&wm8776_spi_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8776 SPI driver: %d\n",
+ ret);
+ }
+#endif
+ return 0;
+}
+module_init(wm8776_modinit);
+
+static void __exit wm8776_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8776_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ spi_unregister_driver(&wm8776_spi_driver);
+#endif
+}
+module_exit(wm8776_exit);
+
+MODULE_DESCRIPTION("ASoC WM8776 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8776.h b/sound/soc/codecs/wm8776.h
new file mode 100644
index 0000000..6606d25
--- /dev/null
+++ b/sound/soc/codecs/wm8776.h
@@ -0,0 +1,51 @@
+/*
+ * wm8776.h -- WM8776 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8776_H
+#define _WM8776_H
+
+/* Registers */
+
+#define WM8776_HPLVOL 0x00
+#define WM8776_HPRVOL 0x01
+#define WM8776_HPMASTER 0x02
+#define WM8776_DACLVOL 0x03
+#define WM8776_DACRVOL 0x04
+#define WM8776_DACMASTER 0x05
+#define WM8776_PHASESWAP 0x06
+#define WM8776_DACCTRL1 0x07
+#define WM8776_DACMUTE 0x08
+#define WM8776_DACCTRL2 0x09
+#define WM8776_DACIFCTRL 0x0a
+#define WM8776_ADCIFCTRL 0x0b
+#define WM8776_MSTRCTRL 0x0c
+#define WM8776_PWRDOWN 0x0d
+#define WM8776_ADCLVOL 0x0e
+#define WM8776_ADCRVOL 0x0f
+#define WM8776_ALCCTRL1 0x10
+#define WM8776_ALCCTRL2 0x11
+#define WM8776_ALCCTRL3 0x12
+#define WM8776_NOISEGATE 0x13
+#define WM8776_LIMITER 0x14
+#define WM8776_ADCMUX 0x15
+#define WM8776_OUTMUX 0x16
+#define WM8776_RESET 0x17
+
+#define WM8776_CACHEREGNUM 0x17
+
+#define WM8776_DAI_DAC 0
+#define WM8776_DAI_ADC 1
+
+extern struct snd_soc_dai wm8776_dai[];
+extern struct snd_soc_codec_device soc_codec_dev_wm8776;
+
+#endif
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 3c78945..5e9c855 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -116,6 +116,7 @@
#define WM8900_REG_CLOCKING2_DAC_CLKDIV 0x1c
#define WM8900_REG_DACCTRL_MUTE 0x004
+#define WM8900_REG_DACCTRL_DAC_SB_FILT 0x100
#define WM8900_REG_DACCTRL_AIF_LRCLKRATE 0x400
#define WM8900_REG_AUDIO3_ADCLRC_DIR 0x0800
@@ -182,111 +183,20 @@
/* Remaining registers all zero */
};
-/*
- * read wm8900 register cache
- */
-static inline unsigned int wm8900_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= WM8900_MAXREG);
-
- if (reg == WM8900_REG_ID)
- return 0;
-
- return cache[reg];
-}
-
-/*
- * write wm8900 register cache
- */
-static inline void wm8900_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= WM8900_MAXREG);
-
- cache[reg] = value;
-}
-
-/*
- * write to the WM8900 register space
- */
-static int wm8900_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- if (value == wm8900_read_reg_cache(codec, reg))
- return 0;
-
- /* data is
- * D15..D9 WM8900 register offset
- * D8...D0 register data
- */
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- wm8900_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 3) == 3)
- return 0;
- else
- return -EIO;
-}
-
-/*
- * Read from the wm8900.
- */
-static unsigned int wm8900_chip_read(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- BUG_ON(reg != WM8900_REG_ID && reg != WM8900_REG_POWER1);
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- printk(KERN_CRIT "i2c_transfer returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-/*
- * Read from the WM8900 register space. Most registers can't be read
- * and are therefore supplied from cache.
- */
-static unsigned int wm8900_read(struct snd_soc_codec *codec, unsigned int reg)
+static int wm8900_volatile_register(unsigned int reg)
{
switch (reg) {
case WM8900_REG_ID:
- return wm8900_chip_read(codec, reg);
+ case WM8900_REG_POWER1:
+ return 1;
default:
- return wm8900_read_reg_cache(codec, reg);
+ return 0;
}
}
static void wm8900_reset(struct snd_soc_codec *codec)
{
- wm8900_write(codec, WM8900_REG_RESET, 0);
+ snd_soc_write(codec, WM8900_REG_RESET, 0);
memcpy(codec->reg_cache, wm8900_reg_defaults,
sizeof(codec->reg_cache));
@@ -296,14 +206,14 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u16 hpctl1 = wm8900_read(codec, WM8900_REG_HPCTL1);
+ u16 hpctl1 = snd_soc_read(codec, WM8900_REG_HPCTL1);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
/* Clamp headphone outputs */
hpctl1 = WM8900_REG_HPCTL1_HP_CLAMP_IP |
WM8900_REG_HPCTL1_HP_CLAMP_OP;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_POST_PMU:
@@ -312,41 +222,41 @@
hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT |
WM8900_REG_HPCTL1_HP_SHORT2 |
WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
msleep(400);
/* Enable the output stage */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_OP;
hpctl1 |= WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Remove the shorts */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT2;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_PRE_PMD:
/* Short the output */
hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Disable the output stage */
hpctl1 &= ~WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
/* Clamp the outputs and power down input */
hpctl1 |= WM8900_REG_HPCTL1_HP_CLAMP_IP |
WM8900_REG_HPCTL1_HP_CLAMP_OP;
hpctl1 &= ~WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
- wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, hpctl1);
break;
case SND_SOC_DAPM_POST_PMD:
/* Disable everything */
- wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, 0);
break;
default:
@@ -439,7 +349,6 @@
SOC_ENUM("DAC Mute Rate", dac_mute_rate),
SOC_SINGLE("DAC Mono Switch", WM8900_REG_DACCTRL, 9, 1, 0),
SOC_ENUM("DAC Deemphasis", dac_deemphasis),
-SOC_SINGLE("DAC Sloping Stopband Filter Switch", WM8900_REG_DACCTRL, 8, 1, 0),
SOC_SINGLE("DAC Sigma-Delta Modulator Clock Switch", WM8900_REG_DACCTRL,
12, 1, 0),
@@ -723,7 +632,7 @@
struct snd_soc_codec *codec = socdev->card->codec;
u16 reg;
- reg = wm8900_read(codec, WM8900_REG_AUDIO1) & ~0x60;
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO1) & ~0x60;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
@@ -741,7 +650,18 @@
return -EINVAL;
}
- wm8900_write(codec, WM8900_REG_AUDIO1, reg);
+ snd_soc_write(codec, WM8900_REG_AUDIO1, reg);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
+
+ if (params_rate(params) <= 24000)
+ reg |= WM8900_REG_DACCTRL_DAC_SB_FILT;
+ else
+ reg &= ~WM8900_REG_DACCTRL_DAC_SB_FILT;
+
+ snd_soc_write(codec, WM8900_REG_DACCTRL, reg);
+ }
return 0;
}
@@ -834,18 +754,18 @@
return 0;
/* The digital side should be disabled during any change. */
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg & (~WM8900_REG_POWER1_FLL_ENA));
/* Disable the FLL? */
if (!freq_in || !freq_out) {
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
reg & (~WM8900_REG_CLOCKING1_MCLK_SRC));
- reg = wm8900_read(codec, WM8900_REG_FLLCTL1);
- wm8900_write(codec, WM8900_REG_FLLCTL1,
+ reg = snd_soc_read(codec, WM8900_REG_FLLCTL1);
+ snd_soc_write(codec, WM8900_REG_FLLCTL1,
reg & (~WM8900_REG_FLLCTL1_OSC_ENA));
wm8900->fll_in = freq_in;
@@ -862,33 +782,33 @@
/* The osclilator *MUST* be enabled before we enable the
* digital circuit. */
- wm8900_write(codec, WM8900_REG_FLLCTL1,
+ snd_soc_write(codec, WM8900_REG_FLLCTL1,
fll_div.fll_ratio | WM8900_REG_FLLCTL1_OSC_ENA);
- wm8900_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
- wm8900_write(codec, WM8900_REG_FLLCTL5,
+ snd_soc_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
+ snd_soc_write(codec, WM8900_REG_FLLCTL5,
(fll_div.fllclk_div << 6) | (fll_div.n & 0x1f));
if (fll_div.k) {
- wm8900_write(codec, WM8900_REG_FLLCTL2,
+ snd_soc_write(codec, WM8900_REG_FLLCTL2,
(fll_div.k >> 8) | 0x100);
- wm8900_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
+ snd_soc_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
} else
- wm8900_write(codec, WM8900_REG_FLLCTL2, 0);
+ snd_soc_write(codec, WM8900_REG_FLLCTL2, 0);
if (fll_div.fll_slow_lock_ref)
- wm8900_write(codec, WM8900_REG_FLLCTL6,
+ snd_soc_write(codec, WM8900_REG_FLLCTL6,
WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF);
else
- wm8900_write(codec, WM8900_REG_FLLCTL6, 0);
+ snd_soc_write(codec, WM8900_REG_FLLCTL6, 0);
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg | WM8900_REG_POWER1_FLL_ENA);
reenable:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
reg | WM8900_REG_CLOCKING1_MCLK_SRC);
return 0;
@@ -908,38 +828,38 @@
switch (div_id) {
case WM8900_BCLK_DIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
div | (reg & WM8900_REG_CLOCKING1_BCLK_MASK));
break;
case WM8900_OPCLK_DIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
- wm8900_write(codec, WM8900_REG_CLOCKING1,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1,
div | (reg & WM8900_REG_CLOCKING1_OPCLK_MASK));
break;
case WM8900_DAC_LRCLK:
- reg = wm8900_read(codec, WM8900_REG_AUDIO4);
- wm8900_write(codec, WM8900_REG_AUDIO4,
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO4);
+ snd_soc_write(codec, WM8900_REG_AUDIO4,
div | (reg & WM8900_LRC_MASK));
break;
case WM8900_ADC_LRCLK:
- reg = wm8900_read(codec, WM8900_REG_AUDIO3);
- wm8900_write(codec, WM8900_REG_AUDIO3,
+ reg = snd_soc_read(codec, WM8900_REG_AUDIO3);
+ snd_soc_write(codec, WM8900_REG_AUDIO3,
div | (reg & WM8900_LRC_MASK));
break;
case WM8900_DAC_CLKDIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
- wm8900_write(codec, WM8900_REG_CLOCKING2,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
+ snd_soc_write(codec, WM8900_REG_CLOCKING2,
div | (reg & WM8900_REG_CLOCKING2_DAC_CLKDIV));
break;
case WM8900_ADC_CLKDIV:
- reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
- wm8900_write(codec, WM8900_REG_CLOCKING2,
+ reg = snd_soc_read(codec, WM8900_REG_CLOCKING2);
+ snd_soc_write(codec, WM8900_REG_CLOCKING2,
div | (reg & WM8900_REG_CLOCKING2_ADC_CLKDIV));
break;
case WM8900_LRCLK_MODE:
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
- wm8900_write(codec, WM8900_REG_DACCTRL,
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
+ snd_soc_write(codec, WM8900_REG_DACCTRL,
div | (reg & WM8900_REG_DACCTRL_AIF_LRCLKRATE));
break;
default:
@@ -956,10 +876,10 @@
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int clocking1, aif1, aif3, aif4;
- clocking1 = wm8900_read(codec, WM8900_REG_CLOCKING1);
- aif1 = wm8900_read(codec, WM8900_REG_AUDIO1);
- aif3 = wm8900_read(codec, WM8900_REG_AUDIO3);
- aif4 = wm8900_read(codec, WM8900_REG_AUDIO4);
+ clocking1 = snd_soc_read(codec, WM8900_REG_CLOCKING1);
+ aif1 = snd_soc_read(codec, WM8900_REG_AUDIO1);
+ aif3 = snd_soc_read(codec, WM8900_REG_AUDIO3);
+ aif4 = snd_soc_read(codec, WM8900_REG_AUDIO4);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1055,10 +975,10 @@
return -EINVAL;
}
- wm8900_write(codec, WM8900_REG_CLOCKING1, clocking1);
- wm8900_write(codec, WM8900_REG_AUDIO1, aif1);
- wm8900_write(codec, WM8900_REG_AUDIO3, aif3);
- wm8900_write(codec, WM8900_REG_AUDIO4, aif4);
+ snd_soc_write(codec, WM8900_REG_CLOCKING1, clocking1);
+ snd_soc_write(codec, WM8900_REG_AUDIO1, aif1);
+ snd_soc_write(codec, WM8900_REG_AUDIO3, aif3);
+ snd_soc_write(codec, WM8900_REG_AUDIO4, aif4);
return 0;
}
@@ -1068,14 +988,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
u16 reg;
- reg = wm8900_read(codec, WM8900_REG_DACCTRL);
+ reg = snd_soc_read(codec, WM8900_REG_DACCTRL);
if (mute)
reg |= WM8900_REG_DACCTRL_MUTE;
else
reg &= ~WM8900_REG_DACCTRL_MUTE;
- wm8900_write(codec, WM8900_REG_DACCTRL, reg);
+ snd_soc_write(codec, WM8900_REG_DACCTRL, reg);
return 0;
}
@@ -1124,11 +1044,11 @@
switch (level) {
case SND_SOC_BIAS_ON:
/* Enable thermal shutdown */
- reg = wm8900_read(codec, WM8900_REG_GPIO);
- wm8900_write(codec, WM8900_REG_GPIO,
+ reg = snd_soc_read(codec, WM8900_REG_GPIO);
+ snd_soc_write(codec, WM8900_REG_GPIO,
reg | WM8900_REG_GPIO_TEMP_ENA);
- reg = wm8900_read(codec, WM8900_REG_ADDCTL);
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ reg = snd_soc_read(codec, WM8900_REG_ADDCTL);
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
reg | WM8900_REG_ADDCTL_TEMP_SD);
break;
@@ -1139,69 +1059,69 @@
/* Charge capacitors if initial power up */
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* STARTUP_BIAS_ENA on */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA);
/* Startup bias mode */
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
WM8900_REG_ADDCTL_BIAS_SRC |
WM8900_REG_ADDCTL_VMID_SOFTST);
/* VMID 2x50k */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA | 0x1);
/* Allow capacitors to charge */
schedule_timeout_interruptible(msecs_to_jiffies(400));
/* Enable bias */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA |
WM8900_REG_POWER1_BIAS_ENA | 0x1);
- wm8900_write(codec, WM8900_REG_ADDCTL, 0);
+ snd_soc_write(codec, WM8900_REG_ADDCTL, 0);
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_BIAS_ENA | 0x1);
}
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
(reg & WM8900_REG_POWER1_FLL_ENA) |
WM8900_REG_POWER1_BIAS_ENA | 0x1);
- wm8900_write(codec, WM8900_REG_POWER2,
+ snd_soc_write(codec, WM8900_REG_POWER2,
WM8900_REG_POWER2_SYSCLK_ENA);
- wm8900_write(codec, WM8900_REG_POWER3, 0);
+ snd_soc_write(codec, WM8900_REG_POWER3, 0);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias enable */
- reg = wm8900_read(codec, WM8900_REG_POWER1);
- wm8900_write(codec, WM8900_REG_POWER1,
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
+ snd_soc_write(codec, WM8900_REG_POWER1,
reg & WM8900_REG_POWER1_STARTUP_BIAS_ENA);
- wm8900_write(codec, WM8900_REG_ADDCTL,
+ snd_soc_write(codec, WM8900_REG_ADDCTL,
WM8900_REG_ADDCTL_BIAS_SRC |
WM8900_REG_ADDCTL_VMID_SOFTST);
/* Discharge caps */
- wm8900_write(codec, WM8900_REG_POWER1,
+ snd_soc_write(codec, WM8900_REG_POWER1,
WM8900_REG_POWER1_STARTUP_BIAS_ENA);
schedule_timeout_interruptible(msecs_to_jiffies(500));
/* Remove clamp */
- wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+ snd_soc_write(codec, WM8900_REG_HPCTL1, 0);
/* Power down */
- wm8900_write(codec, WM8900_REG_ADDCTL, 0);
- wm8900_write(codec, WM8900_REG_POWER1, 0);
- wm8900_write(codec, WM8900_REG_POWER2, 0);
- wm8900_write(codec, WM8900_REG_POWER3, 0);
+ snd_soc_write(codec, WM8900_REG_ADDCTL, 0);
+ snd_soc_write(codec, WM8900_REG_POWER1, 0);
+ snd_soc_write(codec, WM8900_REG_POWER2, 0);
+ snd_soc_write(codec, WM8900_REG_POWER3, 0);
/* Need to let things settle before stopping the clock
* to ensure that restart works, see "Stopping the
* master clock" in the datasheet. */
schedule_timeout_interruptible(msecs_to_jiffies(1));
- wm8900_write(codec, WM8900_REG_POWER2,
+ snd_soc_write(codec, WM8900_REG_POWER2,
WM8900_REG_POWER2_SYSCLK_ENA);
break;
}
@@ -1264,7 +1184,7 @@
if (cache) {
for (i = 0; i < WM8900_MAXREG; i++)
- wm8900_write(codec, i, cache[i]);
+ snd_soc_write(codec, i, cache[i]);
kfree(cache);
} else
dev_err(&pdev->dev, "Unable to allocate register cache\n");
@@ -1297,16 +1217,20 @@
codec->name = "WM8900";
codec->owner = THIS_MODULE;
- codec->read = wm8900_read;
- codec->write = wm8900_write;
codec->dai = &wm8900_dai;
codec->num_dai = 1;
- codec->hw_write = (hw_write_t)i2c_master_send;
codec->control_data = i2c;
codec->set_bias_level = wm8900_set_bias_level;
+ codec->volatile_register = wm8900_volatile_register;
codec->dev = &i2c->dev;
- reg = wm8900_read(codec, WM8900_REG_ID);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ reg = snd_soc_read(codec, WM8900_REG_ID);
if (reg != 0x8900) {
dev_err(&i2c->dev, "Device is not a WM8900 - ID %x\n", reg);
ret = -ENODEV;
@@ -1314,7 +1238,7 @@
}
/* Read back from the chip */
- reg = wm8900_chip_read(codec, WM8900_REG_POWER1);
+ reg = snd_soc_read(codec, WM8900_REG_POWER1);
reg = (reg >> 12) & 0xf;
dev_info(&i2c->dev, "WM8900 revision %d\n", reg);
@@ -1324,29 +1248,29 @@
wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the volume update bits */
- wm8900_write(codec, WM8900_REG_LINVOL,
- wm8900_read(codec, WM8900_REG_LINVOL) | 0x100);
- wm8900_write(codec, WM8900_REG_RINVOL,
- wm8900_read(codec, WM8900_REG_RINVOL) | 0x100);
- wm8900_write(codec, WM8900_REG_LOUT1CTL,
- wm8900_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_ROUT1CTL,
- wm8900_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_LOUT2CTL,
- wm8900_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_ROUT2CTL,
- wm8900_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
- wm8900_write(codec, WM8900_REG_LDAC_DV,
- wm8900_read(codec, WM8900_REG_LDAC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_RDAC_DV,
- wm8900_read(codec, WM8900_REG_RDAC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_LADC_DV,
- wm8900_read(codec, WM8900_REG_LADC_DV) | 0x100);
- wm8900_write(codec, WM8900_REG_RADC_DV,
- wm8900_read(codec, WM8900_REG_RADC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LINVOL,
+ snd_soc_read(codec, WM8900_REG_LINVOL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RINVOL,
+ snd_soc_read(codec, WM8900_REG_RINVOL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LOUT1CTL,
+ snd_soc_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_ROUT1CTL,
+ snd_soc_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LOUT2CTL,
+ snd_soc_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_ROUT2CTL,
+ snd_soc_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LDAC_DV,
+ snd_soc_read(codec, WM8900_REG_LDAC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RDAC_DV,
+ snd_soc_read(codec, WM8900_REG_RDAC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_LADC_DV,
+ snd_soc_read(codec, WM8900_REG_LADC_DV) | 0x100);
+ snd_soc_write(codec, WM8900_REG_RADC_DV,
+ snd_soc_read(codec, WM8900_REG_RADC_DV) | 0x100);
/* Set the DAC and mixer output bias */
- wm8900_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
+ snd_soc_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
wm8900_dai.dev = &i2c->dev;
@@ -1388,6 +1312,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8900_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8900_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8900_i2c_suspend NULL
+#define wm8900_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8900_i2c_id[] = {
{ "wm8900", 0 },
{ }
@@ -1401,6 +1340,8 @@
},
.probe = wm8900_i2c_probe,
.remove = __devexit_p(wm8900_i2c_remove),
+ .suspend = wm8900_i2c_suspend,
+ .resume = wm8900_i2c_resume,
.id_table = wm8900_i2c_id,
};
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index e8d2e3e..fe1307b 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -225,94 +225,18 @@
struct snd_pcm_substream *slave_substream;
};
-
-static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
-
- return cache[reg];
-}
-
-static unsigned int wm8903_hw_read(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- pr_err("i2c_transfer returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-static unsigned int wm8903_read(struct snd_soc_codec *codec,
- unsigned int reg)
+static int wm8903_volatile_register(unsigned int reg)
{
switch (reg) {
case WM8903_SW_RESET_AND_ID:
case WM8903_REVISION_NUMBER:
case WM8903_INTERRUPT_STATUS_1:
case WM8903_WRITE_SEQUENCER_4:
- return wm8903_hw_read(codec, reg);
+ return 1;
default:
- return wm8903_read_reg_cache(codec, reg);
- }
-}
-
-static void wm8903_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
-
- switch (reg) {
- case WM8903_SW_RESET_AND_ID:
- case WM8903_REVISION_NUMBER:
- break;
-
- default:
- cache[reg] = value;
- break;
- }
-}
-
-static int wm8903_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- wm8903_write_reg_cache(codec, reg, value);
-
- /* Data format is 1 byte of address followed by 2 bytes of data */
- data[0] = reg;
- data[1] = (value >> 8) & 0xff;
- data[2] = value & 0xff;
-
- if (codec->hw_write(codec->control_data, data, 3) == 2)
return 0;
- else
- return -EIO;
+ }
}
static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
@@ -323,13 +247,13 @@
BUG_ON(start > 48);
/* Enable the sequencer */
- reg[0] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_0);
+ reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
reg[0] |= WM8903_WSEQ_ENA;
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_3,
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3,
start | WM8903_WSEQ_START);
/* Wait for it to complete. If we have the interrupt wired up then
@@ -339,13 +263,13 @@
do {
msleep(10);
- reg[4] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_4);
+ reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
} while (reg[4] & WM8903_WSEQ_BUSY);
dev_dbg(&i2c->dev, "Sequence complete\n");
/* Disable the sequencer again */
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_0,
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
reg[0] & ~WM8903_WSEQ_ENA);
return 0;
@@ -357,12 +281,12 @@
/* There really ought to be something better we can do here :/ */
for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
- cache[i] = wm8903_hw_read(codec, i);
+ cache[i] = codec->hw_read(codec, i);
}
static void wm8903_reset(struct snd_soc_codec *codec)
{
- wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+ snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0);
memcpy(codec->reg_cache, wm8903_reg_defaults,
sizeof(wm8903_reg_defaults));
}
@@ -423,52 +347,52 @@
}
if (event & SND_SOC_DAPM_PRE_PMU) {
- val = wm8903_read(codec, reg);
+ val = snd_soc_read(codec, reg);
/* Short the output */
val &= ~(WM8903_OUTPUT_SHORT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
}
if (event & SND_SOC_DAPM_POST_PMU) {
- val = wm8903_read(codec, reg);
+ val = snd_soc_read(codec, reg);
val |= (WM8903_OUTPUT_IN << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
val |= (WM8903_OUTPUT_INT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
/* Turn on the output ENA_OUTP */
val |= (WM8903_OUTPUT_OUT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
/* Enable the DC servo */
- dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+ dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
dcs_reg |= dcs_bit;
- wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+ snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
/* Remove the short */
val |= (WM8903_OUTPUT_SHORT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
}
if (event & SND_SOC_DAPM_PRE_PMD) {
- val = wm8903_read(codec, reg);
+ val = snd_soc_read(codec, reg);
/* Short the output */
val &= ~(WM8903_OUTPUT_SHORT << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
/* Disable the DC servo */
- dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0);
+ dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
dcs_reg &= ~dcs_bit;
- wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg);
+ snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
/* Then disable the intermediate and output stages */
val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
WM8903_OUTPUT_IN) << shift);
- wm8903_write(codec, reg, val);
+ snd_soc_write(codec, reg, val);
}
return 0;
@@ -492,13 +416,13 @@
u16 reg;
int ret;
- reg = wm8903_read(codec, WM8903_CLASS_W_0);
+ reg = snd_soc_read(codec, WM8903_CLASS_W_0);
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 0) {
dev_dbg(&i2c->dev, "Disabling Class W\n");
- wm8903_write(codec, WM8903_CLASS_W_0, reg &
+ snd_soc_write(codec, WM8903_CLASS_W_0, reg &
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
}
wm8903->class_w_users++;
@@ -511,7 +435,7 @@
if (!ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 1) {
dev_dbg(&i2c->dev, "Enabling Class W\n");
- wm8903_write(codec, WM8903_CLASS_W_0, reg |
+ snd_soc_write(codec, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
wm8903->class_w_users--;
@@ -715,8 +639,6 @@
SOC_ENUM("DAC Mute Mode", mute_mode),
SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
SOC_ENUM("DAC De-emphasis", dac_deemphasis),
-SOC_SINGLE("DAC Sloping Stopband Filter Switch",
- WM8903_DAC_DIGITAL_1, 11, 1, 0),
SOC_ENUM("DAC Companding Mode", dac_companding),
SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
@@ -1011,55 +933,55 @@
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
- reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+ reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
reg &= ~(WM8903_VMID_RES_MASK);
reg |= WM8903_VMID_RES_50K;
- wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+ snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
- wm8903_write(codec, WM8903_CLOCK_RATES_2,
+ snd_soc_write(codec, WM8903_CLOCK_RATES_2,
WM8903_CLK_SYS_ENA);
/* Change DC servo dither level in startup sequence */
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
- wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
wm8903_run_sequence(codec, 0);
wm8903_sync_reg_cache(codec, codec->reg_cache);
/* Enable low impedence charge pump output */
- reg = wm8903_read(codec,
+ reg = snd_soc_read(codec,
WM8903_CONTROL_INTERFACE_TEST_1);
- wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+ snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
reg | WM8903_TEST_KEY);
- reg2 = wm8903_read(codec, WM8903_CHARGE_PUMP_TEST_1);
- wm8903_write(codec, WM8903_CHARGE_PUMP_TEST_1,
+ reg2 = snd_soc_read(codec, WM8903_CHARGE_PUMP_TEST_1);
+ snd_soc_write(codec, WM8903_CHARGE_PUMP_TEST_1,
reg2 | WM8903_CP_SW_KELVIN_MODE_MASK);
- wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+ snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
reg);
/* By default no bypass paths are enabled so
* enable Class W support.
*/
dev_dbg(&i2c->dev, "Enabling Class W\n");
- wm8903_write(codec, WM8903_CLASS_W_0, reg |
+ snd_soc_write(codec, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
- reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+ reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
reg &= ~(WM8903_VMID_RES_MASK);
reg |= WM8903_VMID_RES_250K;
- wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+ snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg);
break;
case SND_SOC_BIAS_OFF:
wm8903_run_sequence(codec, 32);
- reg = wm8903_read(codec, WM8903_CLOCK_RATES_2);
+ reg = snd_soc_read(codec, WM8903_CLOCK_RATES_2);
reg &= ~WM8903_CLK_SYS_ENA;
- wm8903_write(codec, WM8903_CLOCK_RATES_2, reg);
+ snd_soc_write(codec, WM8903_CLOCK_RATES_2, reg);
break;
}
@@ -1083,7 +1005,7 @@
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
+ u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
@@ -1161,7 +1083,7 @@
return -EINVAL;
}
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
return 0;
}
@@ -1171,14 +1093,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
u16 reg;
- reg = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+ reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
if (mute)
reg |= WM8903_DAC_MUTE;
else
reg &= ~WM8903_DAC_MUTE;
- wm8903_write(codec, WM8903_DAC_DIGITAL_1, reg);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg);
return 0;
}
@@ -1368,17 +1290,24 @@
int cur_val;
int clk_sys;
- u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
- u16 aif2 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_2);
- u16 aif3 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_3);
- u16 clock0 = wm8903_read(codec, WM8903_CLOCK_RATES_0);
- u16 clock1 = wm8903_read(codec, WM8903_CLOCK_RATES_1);
+ u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
+ u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2);
+ u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3);
+ u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0);
+ u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1);
+ u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
if (substream == wm8903->slave_substream) {
dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
return 0;
}
+ /* Enable sloping stopband filter for low sample rates */
+ if (fs <= 24000)
+ dac_digital1 |= WM8903_DAC_SB_FILT;
+ else
+ dac_digital1 &= ~WM8903_DAC_SB_FILT;
+
/* Configure sample rate logic for DSP - choose nearest rate */
dsp_config = 0;
best_val = abs(sample_rates[dsp_config].rate - fs);
@@ -1498,11 +1427,12 @@
aif2 |= bclk_divs[bclk_div].div;
aif3 |= bclk / fs;
- wm8903_write(codec, WM8903_CLOCK_RATES_0, clock0);
- wm8903_write(codec, WM8903_CLOCK_RATES_1, clock1);
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
- wm8903_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
+ snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0);
+ snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
+ snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1);
return 0;
}
@@ -1587,7 +1517,7 @@
if (tmp_cache) {
for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
if (tmp_cache[i] != reg_cache[i])
- wm8903_write(codec, i, tmp_cache[i]);
+ snd_soc_write(codec, i, tmp_cache[i]);
} else {
dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
}
@@ -1618,9 +1548,6 @@
codec->dev = &i2c->dev;
codec->name = "WM8903";
codec->owner = THIS_MODULE;
- codec->read = wm8903_read;
- codec->write = wm8903_write;
- codec->hw_write = (hw_write_t)i2c_master_send;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8903_set_bias_level;
codec->dai = &wm8903_dai;
@@ -1628,18 +1555,25 @@
codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
codec->reg_cache = &wm8903->reg_cache[0];
codec->private_data = wm8903;
+ codec->volatile_register = wm8903_volatile_register;
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
dev_err(&i2c->dev,
"Device with ID register %x is not a WM8903\n", val);
return -ENODEV;
}
- val = wm8903_read(codec, WM8903_REVISION_NUMBER);
+ val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
dev_info(&i2c->dev, "WM8903 revision %d\n",
val & WM8903_CHIP_REV_MASK);
@@ -1649,35 +1583,35 @@
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch volume update bits */
- val = wm8903_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
+ val = snd_soc_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
val |= WM8903_ADCVU;
- wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
- wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
+ snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
+ snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
- val = wm8903_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
+ val = snd_soc_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
val |= WM8903_DACVU;
- wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
- wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
- val = wm8903_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
+ val = snd_soc_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
val |= WM8903_HPOUTVU;
- wm8903_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
- wm8903_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
- val = wm8903_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
+ val = snd_soc_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
val |= WM8903_LINEOUTVU;
- wm8903_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
- wm8903_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
- val = wm8903_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
+ val = snd_soc_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
val |= WM8903_SPKVU;
- wm8903_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
- wm8903_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
+ snd_soc_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
/* Enable DAC soft mute by default */
- val = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+ val = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
val |= WM8903_DAC_MUTEMODE;
- wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
+ snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val);
wm8903_dai.dev = &i2c->dev;
wm8903_codec = codec;
@@ -1721,6 +1655,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8903_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8903_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8903_i2c_suspend NULL
+#define wm8903_i2c_resume NULL
+#endif
+
/* i2c codec control layer */
static const struct i2c_device_id wm8903_i2c_id[] = {
{ "wm8903", 0 },
@@ -1735,6 +1684,8 @@
},
.probe = wm8903_i2c_probe,
.remove = __devexit_p(wm8903_i2c_remove),
+ .suspend = wm8903_i2c_suspend,
+ .resume = wm8903_i2c_resume,
.id_table = wm8903_i2c_id,
};
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index b8e17d6..da97aae 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -106,50 +106,6 @@
0x0000, /* Mono Mixer Control */
};
-static inline unsigned int wm8940_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
-
- if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
- return -1;
-
- return cache[reg];
-}
-
-static inline int wm8940_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- if (reg >= ARRAY_SIZE(wm8940_reg_defaults))
- return -1;
-
- cache[reg] = value;
-
- return 0;
-}
-
-static int wm8940_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- int ret;
- u8 data[3] = { reg,
- (value & 0xff00) >> 8,
- (value & 0x00ff)
- };
-
- wm8940_write_reg_cache(codec, reg, value);
-
- ret = codec->hw_write(codec->control_data, data, 3);
-
- if (ret < 0)
- return ret;
- else if (ret != 3)
- return -EIO;
- return 0;
-}
-
static const char *wm8940_companding[] = { "Off", "NC", "u-law", "A-law" };
static const struct soc_enum wm8940_adc_companding_enum
= SOC_ENUM_SINGLE(WM8940_COMPANDINGCTL, 1, 4, wm8940_companding);
@@ -348,14 +304,14 @@
return ret;
}
-#define wm8940_reset(c) wm8940_write(c, WM8940_SOFTRESET, 0);
+#define wm8940_reset(c) snd_soc_write(c, WM8940_SOFTRESET, 0);
static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFE67;
- u16 clk = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0x1fe;
+ u16 iface = snd_soc_read(codec, WM8940_IFACE) & 0xFE67;
+ u16 clk = snd_soc_read(codec, WM8940_CLOCK) & 0x1fe;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
@@ -366,7 +322,7 @@
default:
return -EINVAL;
}
- wm8940_write(codec, WM8940_CLOCK, clk);
+ snd_soc_write(codec, WM8940_CLOCK, clk);
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
@@ -399,7 +355,7 @@
break;
}
- wm8940_write(codec, WM8940_IFACE, iface);
+ snd_soc_write(codec, WM8940_IFACE, iface);
return 0;
}
@@ -411,9 +367,9 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 iface = wm8940_read_reg_cache(codec, WM8940_IFACE) & 0xFD9F;
- u16 addcntrl = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFF1;
- u16 companding = wm8940_read_reg_cache(codec,
+ u16 iface = snd_soc_read(codec, WM8940_IFACE) & 0xFD9F;
+ u16 addcntrl = snd_soc_read(codec, WM8940_ADDCNTRL) & 0xFFF1;
+ u16 companding = snd_soc_read(codec,
WM8940_COMPANDINGCTL) & 0xFFDF;
int ret;
@@ -442,7 +398,7 @@
case SNDRV_PCM_RATE_48000:
break;
}
- ret = wm8940_write(codec, WM8940_ADDCNTRL, addcntrl);
+ ret = snd_soc_write(codec, WM8940_ADDCNTRL, addcntrl);
if (ret)
goto error_ret;
@@ -462,10 +418,10 @@
iface |= (3 << 5);
break;
}
- ret = wm8940_write(codec, WM8940_COMPANDINGCTL, companding);
+ ret = snd_soc_write(codec, WM8940_COMPANDINGCTL, companding);
if (ret)
goto error_ret;
- ret = wm8940_write(codec, WM8940_IFACE, iface);
+ ret = snd_soc_write(codec, WM8940_IFACE, iface);
error_ret:
return ret;
@@ -474,19 +430,19 @@
static int wm8940_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8940_read_reg_cache(codec, WM8940_DAC) & 0xffbf;
+ u16 mute_reg = snd_soc_read(codec, WM8940_DAC) & 0xffbf;
if (mute)
mute_reg |= 0x40;
- return wm8940_write(codec, WM8940_DAC, mute_reg);
+ return snd_soc_write(codec, WM8940_DAC, mute_reg);
}
static int wm8940_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
u16 val;
- u16 pwr_reg = wm8940_read_reg_cache(codec, WM8940_POWER1) & 0x1F0;
+ u16 pwr_reg = snd_soc_read(codec, WM8940_POWER1) & 0x1F0;
int ret = 0;
switch (level) {
@@ -494,26 +450,26 @@
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
/* Enable thermal shutdown */
- val = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
- ret = wm8940_write(codec, WM8940_OUTPUTCTL, val | 0x2);
+ val = snd_soc_read(codec, WM8940_OUTPUTCTL);
+ ret = snd_soc_write(codec, WM8940_OUTPUTCTL, val | 0x2);
if (ret)
break;
/* set vmid to 75k */
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1);
break;
case SND_SOC_BIAS_PREPARE:
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x1);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x1);
break;
case SND_SOC_BIAS_STANDBY:
/* ensure bufioen and biasen */
pwr_reg |= (1 << 2) | (1 << 3);
/* set vmid to 300k for standby */
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg | 0x2);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg | 0x2);
break;
case SND_SOC_BIAS_OFF:
- ret = wm8940_write(codec, WM8940_POWER1, pwr_reg);
+ ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg);
break;
}
@@ -587,36 +543,36 @@
u16 reg;
/* Turn off PLL */
- reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
- wm8940_write(codec, WM8940_POWER1, reg & 0x1df);
+ reg = snd_soc_read(codec, WM8940_POWER1);
+ snd_soc_write(codec, WM8940_POWER1, reg & 0x1df);
if (freq_in == 0 || freq_out == 0) {
/* Clock CODEC directly from MCLK */
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
- wm8940_write(codec, WM8940_CLOCK, reg & 0x0ff);
+ reg = snd_soc_read(codec, WM8940_CLOCK);
+ snd_soc_write(codec, WM8940_CLOCK, reg & 0x0ff);
/* Pll power down */
- wm8940_write(codec, WM8940_PLLN, (1 << 7));
+ snd_soc_write(codec, WM8940_PLLN, (1 << 7));
return 0;
}
/* Pll is followed by a frequency divide by 4 */
pll_factors(freq_out*4, freq_in);
if (pll_div.k)
- wm8940_write(codec, WM8940_PLLN,
+ snd_soc_write(codec, WM8940_PLLN,
(pll_div.pre_scale << 4) | pll_div.n | (1 << 6));
else /* No factional component */
- wm8940_write(codec, WM8940_PLLN,
+ snd_soc_write(codec, WM8940_PLLN,
(pll_div.pre_scale << 4) | pll_div.n);
- wm8940_write(codec, WM8940_PLLK1, pll_div.k >> 18);
- wm8940_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
- wm8940_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
+ snd_soc_write(codec, WM8940_PLLK1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8940_PLLK2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8940_PLLK3, pll_div.k & 0x1ff);
/* Enable the PLL */
- reg = wm8940_read_reg_cache(codec, WM8940_POWER1);
- wm8940_write(codec, WM8940_POWER1, reg | 0x020);
+ reg = snd_soc_read(codec, WM8940_POWER1);
+ snd_soc_write(codec, WM8940_POWER1, reg | 0x020);
/* Run CODEC from PLL instead of MCLK */
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK);
- wm8940_write(codec, WM8940_CLOCK, reg | 0x100);
+ reg = snd_soc_read(codec, WM8940_CLOCK);
+ snd_soc_write(codec, WM8940_CLOCK, reg | 0x100);
return 0;
}
@@ -648,16 +604,16 @@
switch (div_id) {
case WM8940_BCLKDIV:
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFFEF3;
- ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 2));
+ reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFEF3;
+ ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2));
break;
case WM8940_MCLKDIV:
- reg = wm8940_read_reg_cache(codec, WM8940_CLOCK) & 0xFF1F;
- ret = wm8940_write(codec, WM8940_CLOCK, reg | (div << 5));
+ reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFF1F;
+ ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 5));
break;
case WM8940_OPCLKDIV:
- reg = wm8940_read_reg_cache(codec, WM8940_ADDCNTRL) & 0xFFCF;
- ret = wm8940_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
+ reg = snd_soc_read(codec, WM8940_ADDCNTRL) & 0xFFCF;
+ ret = snd_soc_write(codec, WM8940_ADDCNTRL, reg | (div << 4));
break;
}
return ret;
@@ -808,7 +764,8 @@
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8940);
-static int wm8940_register(struct wm8940_priv *wm8940)
+static int wm8940_register(struct wm8940_priv *wm8940,
+ enum snd_soc_control_type control)
{
struct wm8940_setup_data *pdata = wm8940->codec.dev->platform_data;
struct snd_soc_codec *codec = &wm8940->codec;
@@ -825,8 +782,6 @@
codec->private_data = wm8940;
codec->name = "WM8940";
codec->owner = THIS_MODULE;
- codec->read = wm8940_read_reg_cache;
- codec->write = wm8940_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8940_set_bias_level;
codec->dai = &wm8940_dai;
@@ -834,6 +789,12 @@
codec->reg_cache_size = ARRAY_SIZE(wm8940_reg_defaults);
codec->reg_cache = &wm8940->reg_cache;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret == 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
memcpy(codec->reg_cache, wm8940_reg_defaults,
sizeof(wm8940_reg_defaults));
@@ -847,15 +808,15 @@
wm8940_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- ret = wm8940_write(codec, WM8940_POWER1, 0x180);
+ ret = snd_soc_write(codec, WM8940_POWER1, 0x180);
if (ret < 0)
return ret;
if (!pdata)
dev_warn(codec->dev, "No platform data supplied\n");
else {
- reg = wm8940_read_reg_cache(codec, WM8940_OUTPUTCTL);
- ret = wm8940_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
+ reg = snd_soc_read(codec, WM8940_OUTPUTCTL);
+ ret = snd_soc_write(codec, WM8940_OUTPUTCTL, reg | pdata->vroi);
if (ret < 0)
return ret;
}
@@ -904,7 +865,7 @@
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8940_register(wm8940);
+ return wm8940_register(wm8940, SND_SOC_I2C);
}
static int __devexit wm8940_i2c_remove(struct i2c_client *client)
@@ -916,6 +877,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8940_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8940_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8940_i2c_suspend NULL
+#define wm8940_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8940_i2c_id[] = {
{ "wm8940", 0 },
{ }
@@ -929,6 +905,8 @@
},
.probe = wm8940_i2c_probe,
.remove = __devexit_p(wm8940_i2c_remove),
+ .suspend = wm8940_i2c_suspend,
+ .resume = wm8940_i2c_resume,
.id_table = wm8940_i2c_id,
};
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index e224d8a..f59703b 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -69,61 +69,7 @@
struct snd_soc_codec codec;
};
-/*
- * read wm8960 register cache
- */
-static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg == WM8960_RESET)
- return 0;
- if (reg >= WM8960_CACHEREGNUM)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8960 register cache
- */
-static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec,
- u16 reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg >= WM8960_CACHEREGNUM)
- return;
- cache[reg] = value;
-}
-
-static inline unsigned int wm8960_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- return wm8960_read_reg_cache(codec, reg);
-}
-
-/*
- * write to the WM8960 register space
- */
-static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8960 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8960_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8960_reset(c) wm8960_write(c, WM8960_RESET, 0)
+#define wm8960_reset(c) snd_soc_write(c, WM8960_RESET, 0)
/* enumerated controls */
static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
@@ -420,7 +366,7 @@
}
/* set iface */
- wm8960_write(codec, WM8960_IFACE1, iface);
+ snd_soc_write(codec, WM8960_IFACE1, iface);
return 0;
}
@@ -431,7 +377,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3;
+ u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3;
/* bit size */
switch (params_format(params)) {
@@ -446,19 +392,19 @@
}
/* set iface */
- wm8960_write(codec, WM8960_IFACE1, iface);
+ snd_soc_write(codec, WM8960_IFACE1, iface);
return 0;
}
static int wm8960_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8960_DACCTL1) & 0xfff7;
if (mute)
- wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
+ snd_soc_write(codec, WM8960_DACCTL1, mute_reg | 0x8);
else
- wm8960_write(codec, WM8960_DACCTL1, mute_reg);
+ snd_soc_write(codec, WM8960_DACCTL1, mute_reg);
return 0;
}
@@ -474,16 +420,16 @@
case SND_SOC_BIAS_PREPARE:
/* Set VMID to 2x50k */
- reg = wm8960_read(codec, WM8960_POWER1);
+ reg = snd_soc_read(codec, WM8960_POWER1);
reg &= ~0x180;
reg |= 0x80;
- wm8960_write(codec, WM8960_POWER1, reg);
+ snd_soc_write(codec, WM8960_POWER1, reg);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Enable anti-pop features */
- wm8960_write(codec, WM8960_APOP1,
+ snd_soc_write(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
@@ -491,43 +437,43 @@
reg = WM8960_DISOP;
if (pdata)
reg |= pdata->dres << 4;
- wm8960_write(codec, WM8960_APOP2, reg);
+ snd_soc_write(codec, WM8960_APOP2, reg);
msleep(400);
- wm8960_write(codec, WM8960_APOP2, 0);
+ snd_soc_write(codec, WM8960_APOP2, 0);
/* Enable & ramp VMID at 2x50k */
- reg = wm8960_read(codec, WM8960_POWER1);
+ reg = snd_soc_read(codec, WM8960_POWER1);
reg |= 0x80;
- wm8960_write(codec, WM8960_POWER1, reg);
+ snd_soc_write(codec, WM8960_POWER1, reg);
msleep(100);
/* Enable VREF */
- wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF);
+ snd_soc_write(codec, WM8960_POWER1, reg | WM8960_VREF);
/* Disable anti-pop features */
- wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+ snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
}
/* Set VMID to 2x250k */
- reg = wm8960_read(codec, WM8960_POWER1);
+ reg = snd_soc_read(codec, WM8960_POWER1);
reg &= ~0x180;
reg |= 0x100;
- wm8960_write(codec, WM8960_POWER1, reg);
+ snd_soc_write(codec, WM8960_POWER1, reg);
break;
case SND_SOC_BIAS_OFF:
/* Enable anti-pop features */
- wm8960_write(codec, WM8960_APOP1,
+ snd_soc_write(codec, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
/* Disable VMID and VREF, let them discharge */
- wm8960_write(codec, WM8960_POWER1, 0);
+ snd_soc_write(codec, WM8960_POWER1, 0);
msleep(600);
- wm8960_write(codec, WM8960_APOP1, 0);
+ snd_soc_write(codec, WM8960_APOP1, 0);
break;
}
@@ -610,33 +556,33 @@
/* Disable the PLL: even if we are changing the frequency the
* PLL needs to be disabled while we do so. */
- wm8960_write(codec, WM8960_CLOCK1,
- wm8960_read(codec, WM8960_CLOCK1) & ~1);
- wm8960_write(codec, WM8960_POWER2,
- wm8960_read(codec, WM8960_POWER2) & ~1);
+ snd_soc_write(codec, WM8960_CLOCK1,
+ snd_soc_read(codec, WM8960_CLOCK1) & ~1);
+ snd_soc_write(codec, WM8960_POWER2,
+ snd_soc_read(codec, WM8960_POWER2) & ~1);
if (!freq_in || !freq_out)
return 0;
- reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f;
+ reg = snd_soc_read(codec, WM8960_PLL1) & ~0x3f;
reg |= pll_div.pre_div << 4;
reg |= pll_div.n;
if (pll_div.k) {
reg |= 0x20;
- wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
- wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
- wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
+ snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
+ snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
}
- wm8960_write(codec, WM8960_PLL1, reg);
+ snd_soc_write(codec, WM8960_PLL1, reg);
/* Turn it on */
- wm8960_write(codec, WM8960_POWER2,
- wm8960_read(codec, WM8960_POWER2) | 1);
+ snd_soc_write(codec, WM8960_POWER2,
+ snd_soc_read(codec, WM8960_POWER2) | 1);
msleep(250);
- wm8960_write(codec, WM8960_CLOCK1,
- wm8960_read(codec, WM8960_CLOCK1) | 1);
+ snd_soc_write(codec, WM8960_CLOCK1,
+ snd_soc_read(codec, WM8960_CLOCK1) | 1);
return 0;
}
@@ -649,28 +595,28 @@
switch (div_id) {
case WM8960_SYSCLKSEL:
- reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe;
- wm8960_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1fe;
+ snd_soc_write(codec, WM8960_CLOCK1, reg | div);
break;
case WM8960_SYSCLKDIV:
- reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9;
- wm8960_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1f9;
+ snd_soc_write(codec, WM8960_CLOCK1, reg | div);
break;
case WM8960_DACDIV:
- reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7;
- wm8960_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1c7;
+ snd_soc_write(codec, WM8960_CLOCK1, reg | div);
break;
case WM8960_OPCLKDIV:
- reg = wm8960_read(codec, WM8960_PLL1) & 0x03f;
- wm8960_write(codec, WM8960_PLL1, reg | div);
+ reg = snd_soc_read(codec, WM8960_PLL1) & 0x03f;
+ snd_soc_write(codec, WM8960_PLL1, reg | div);
break;
case WM8960_DCLKDIV:
- reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f;
- wm8960_write(codec, WM8960_CLOCK2, reg | div);
+ reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
+ snd_soc_write(codec, WM8960_CLOCK2, reg | div);
break;
case WM8960_TOCLKSEL:
- reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd;
- wm8960_write(codec, WM8960_ADDCTL1, reg | div);
+ reg = snd_soc_read(codec, WM8960_ADDCTL1) & 0x1fd;
+ snd_soc_write(codec, WM8960_ADDCTL1, reg | div);
break;
default:
return -EINVAL;
@@ -801,7 +747,8 @@
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960);
-static int wm8960_register(struct wm8960_priv *wm8960)
+static int wm8960_register(struct wm8960_priv *wm8960,
+ enum snd_soc_control_type control)
{
struct wm8960_data *pdata = wm8960->codec.dev->platform_data;
struct snd_soc_codec *codec = &wm8960->codec;
@@ -810,7 +757,8 @@
if (wm8960_codec) {
dev_err(codec->dev, "Another WM8960 is registered\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err;
}
if (!pdata) {
@@ -829,8 +777,6 @@
codec->private_data = wm8960;
codec->name = "WM8960";
codec->owner = THIS_MODULE;
- codec->read = wm8960_read_reg_cache;
- codec->write = wm8960_write;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8960_set_bias_level;
codec->dai = &wm8960_dai;
@@ -840,10 +786,16 @@
memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
ret = wm8960_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ goto err;
}
wm8960_dai.dev = codec->dev;
@@ -851,43 +803,48 @@
wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch the update bits */
- reg = wm8960_read(codec, WM8960_LINVOL);
- wm8960_write(codec, WM8960_LINVOL, reg | 0x100);
- reg = wm8960_read(codec, WM8960_RINVOL);
- wm8960_write(codec, WM8960_RINVOL, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LADC);
- wm8960_write(codec, WM8960_LADC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_RADC);
- wm8960_write(codec, WM8960_RADC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LDAC);
- wm8960_write(codec, WM8960_LDAC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_RDAC);
- wm8960_write(codec, WM8960_RDAC, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LOUT1);
- wm8960_write(codec, WM8960_LOUT1, reg | 0x100);
- reg = wm8960_read(codec, WM8960_ROUT1);
- wm8960_write(codec, WM8960_ROUT1, reg | 0x100);
- reg = wm8960_read(codec, WM8960_LOUT2);
- wm8960_write(codec, WM8960_LOUT2, reg | 0x100);
- reg = wm8960_read(codec, WM8960_ROUT2);
- wm8960_write(codec, WM8960_ROUT2, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LINVOL);
+ snd_soc_write(codec, WM8960_LINVOL, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_RINVOL);
+ snd_soc_write(codec, WM8960_RINVOL, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LADC);
+ snd_soc_write(codec, WM8960_LADC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_RADC);
+ snd_soc_write(codec, WM8960_RADC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LDAC);
+ snd_soc_write(codec, WM8960_LDAC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_RDAC);
+ snd_soc_write(codec, WM8960_RDAC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LOUT1);
+ snd_soc_write(codec, WM8960_LOUT1, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_ROUT1);
+ snd_soc_write(codec, WM8960_ROUT1, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_LOUT2);
+ snd_soc_write(codec, WM8960_LOUT2, reg | 0x100);
+ reg = snd_soc_read(codec, WM8960_ROUT2);
+ snd_soc_write(codec, WM8960_ROUT2, reg | 0x100);
wm8960_codec = codec;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- return ret;
+ goto err;
}
ret = snd_soc_register_dai(&wm8960_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
- snd_soc_unregister_codec(codec);
- return ret;
+ goto err_codec;
}
return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8960);
+ return ret;
}
static void wm8960_unregister(struct wm8960_priv *wm8960)
@@ -910,14 +867,13 @@
return -ENOMEM;
codec = &wm8960->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8960);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8960_register(wm8960);
+ return wm8960_register(wm8960, SND_SOC_I2C);
}
static __devexit int wm8960_i2c_remove(struct i2c_client *client)
@@ -927,6 +883,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8960_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8960_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8960_i2c_suspend NULL
+#define wm8960_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8960_i2c_id[] = {
{ "wm8960", 0 },
{ }
@@ -940,6 +911,8 @@
},
.probe = wm8960_i2c_probe,
.remove = __devexit_p(wm8960_i2c_remove),
+ .suspend = wm8960_i2c_suspend,
+ .resume = wm8960_i2c_resume,
.id_table = wm8960_i2c_id,
};
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
new file mode 100644
index 0000000..5030320
--- /dev/null
+++ b/sound/soc/codecs/wm8961.c
@@ -0,0 +1,1265 @@
+/*
+ * wm8961.c -- WM8961 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently unimplemented features:
+ * - ALC
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8961.h"
+
+#define WM8961_MAX_REGISTER 0xFC
+
+static u16 wm8961_reg_defaults[] = {
+ 0x009F, /* R0 - Left Input volume */
+ 0x009F, /* R1 - Right Input volume */
+ 0x0000, /* R2 - LOUT1 volume */
+ 0x0000, /* R3 - ROUT1 volume */
+ 0x0020, /* R4 - Clocking1 */
+ 0x0008, /* R5 - ADC & DAC Control 1 */
+ 0x0000, /* R6 - ADC & DAC Control 2 */
+ 0x000A, /* R7 - Audio Interface 0 */
+ 0x01F4, /* R8 - Clocking2 */
+ 0x0000, /* R9 - Audio Interface 1 */
+ 0x00FF, /* R10 - Left DAC volume */
+ 0x00FF, /* R11 - Right DAC volume */
+ 0x0000, /* R12 */
+ 0x0000, /* R13 */
+ 0x0040, /* R14 - Audio Interface 2 */
+ 0x0000, /* R15 - Software Reset */
+ 0x0000, /* R16 */
+ 0x007B, /* R17 - ALC1 */
+ 0x0000, /* R18 - ALC2 */
+ 0x0032, /* R19 - ALC3 */
+ 0x0000, /* R20 - Noise Gate */
+ 0x00C0, /* R21 - Left ADC volume */
+ 0x00C0, /* R22 - Right ADC volume */
+ 0x0120, /* R23 - Additional control(1) */
+ 0x0000, /* R24 - Additional control(2) */
+ 0x0000, /* R25 - Pwr Mgmt (1) */
+ 0x0000, /* R26 - Pwr Mgmt (2) */
+ 0x0000, /* R27 - Additional Control (3) */
+ 0x0000, /* R28 - Anti-pop */
+ 0x0000, /* R29 */
+ 0x005F, /* R30 - Clocking 3 */
+ 0x0000, /* R31 */
+ 0x0000, /* R32 - ADCL signal path */
+ 0x0000, /* R33 - ADCR signal path */
+ 0x0000, /* R34 */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 */
+ 0x0000, /* R37 */
+ 0x0000, /* R38 */
+ 0x0000, /* R39 */
+ 0x0000, /* R40 - LOUT2 volume */
+ 0x0000, /* R41 - ROUT2 volume */
+ 0x0000, /* R42 */
+ 0x0000, /* R43 */
+ 0x0000, /* R44 */
+ 0x0000, /* R45 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 - Pwr Mgmt (3) */
+ 0x0023, /* R48 - Additional Control (4) */
+ 0x0000, /* R49 - Class D Control 1 */
+ 0x0000, /* R50 */
+ 0x0003, /* R51 - Class D Control 2 */
+ 0x0000, /* R52 */
+ 0x0000, /* R53 */
+ 0x0000, /* R54 */
+ 0x0000, /* R55 */
+ 0x0106, /* R56 - Clocking 4 */
+ 0x0000, /* R57 - DSP Sidetone 0 */
+ 0x0000, /* R58 - DSP Sidetone 1 */
+ 0x0000, /* R59 */
+ 0x0000, /* R60 - DC Servo 0 */
+ 0x0000, /* R61 - DC Servo 1 */
+ 0x0000, /* R62 */
+ 0x015E, /* R63 - DC Servo 3 */
+ 0x0010, /* R64 */
+ 0x0010, /* R65 - DC Servo 5 */
+ 0x0000, /* R66 */
+ 0x0001, /* R67 */
+ 0x0003, /* R68 - Analogue PGA Bias */
+ 0x0000, /* R69 - Analogue HP 0 */
+ 0x0060, /* R70 */
+ 0x01FB, /* R71 - Analogue HP 2 */
+ 0x0000, /* R72 - Charge Pump 1 */
+ 0x0065, /* R73 */
+ 0x005F, /* R74 */
+ 0x0059, /* R75 */
+ 0x006B, /* R76 */
+ 0x0038, /* R77 */
+ 0x000C, /* R78 */
+ 0x000A, /* R79 */
+ 0x006B, /* R80 */
+ 0x0000, /* R81 */
+ 0x0000, /* R82 - Charge Pump B */
+ 0x0087, /* R83 */
+ 0x0000, /* R84 */
+ 0x005C, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 - Write Sequencer 1 */
+ 0x0000, /* R88 - Write Sequencer 2 */
+ 0x0000, /* R89 - Write Sequencer 3 */
+ 0x0000, /* R90 - Write Sequencer 4 */
+ 0x0000, /* R91 - Write Sequencer 5 */
+ 0x0000, /* R92 - Write Sequencer 6 */
+ 0x0000, /* R93 - Write Sequencer 7 */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 */
+ 0x0000, /* R99 */
+ 0x0000, /* R100 */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x0000, /* R104 */
+ 0x0000, /* R105 */
+ 0x0000, /* R106 */
+ 0x0000, /* R107 */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 */
+ 0x0000, /* R112 */
+ 0x0000, /* R113 */
+ 0x0000, /* R114 */
+ 0x0000, /* R115 */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x0000, /* R128 */
+ 0x0000, /* R129 */
+ 0x0000, /* R130 */
+ 0x0000, /* R131 */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 */
+ 0x0000, /* R134 */
+ 0x0000, /* R135 */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0000, /* R140 */
+ 0x0000, /* R141 */
+ 0x0000, /* R142 */
+ 0x0000, /* R143 */
+ 0x0000, /* R144 */
+ 0x0000, /* R145 */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x0000, /* R152 */
+ 0x0000, /* R153 */
+ 0x0000, /* R154 */
+ 0x0000, /* R155 */
+ 0x0000, /* R156 */
+ 0x0000, /* R157 */
+ 0x0000, /* R158 */
+ 0x0000, /* R159 */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 */
+ 0x0000, /* R164 */
+ 0x0000, /* R165 */
+ 0x0000, /* R166 */
+ 0x0000, /* R167 */
+ 0x0000, /* R168 */
+ 0x0000, /* R169 */
+ 0x0000, /* R170 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 */
+ 0x0000, /* R173 */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 */
+ 0x0000, /* R177 */
+ 0x0000, /* R178 */
+ 0x0000, /* R179 */
+ 0x0000, /* R180 */
+ 0x0000, /* R181 */
+ 0x0000, /* R182 */
+ 0x0000, /* R183 */
+ 0x0000, /* R184 */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 */
+ 0x0000, /* R187 */
+ 0x0000, /* R188 */
+ 0x0000, /* R189 */
+ 0x0000, /* R190 */
+ 0x0000, /* R191 */
+ 0x0000, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 */
+ 0x0030, /* R196 */
+ 0x0006, /* R197 */
+ 0x0000, /* R198 */
+ 0x0060, /* R199 */
+ 0x0000, /* R200 */
+ 0x003F, /* R201 */
+ 0x0000, /* R202 */
+ 0x0000, /* R203 */
+ 0x0000, /* R204 */
+ 0x0001, /* R205 */
+ 0x0000, /* R206 */
+ 0x0181, /* R207 */
+ 0x0005, /* R208 */
+ 0x0008, /* R209 */
+ 0x0008, /* R210 */
+ 0x0000, /* R211 */
+ 0x013B, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 */
+ 0x0000, /* R216 */
+ 0x0070, /* R217 */
+ 0x0000, /* R218 */
+ 0x0000, /* R219 */
+ 0x0000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0003, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 */
+ 0x0001, /* R226 */
+ 0x0008, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0x0000, /* R230 */
+ 0x0000, /* R231 */
+ 0x0004, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0080, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0052, /* R245 */
+ 0x0110, /* R246 */
+ 0x0040, /* R247 */
+ 0x0000, /* R248 */
+ 0x0030, /* R249 */
+ 0x0000, /* R250 */
+ 0x0000, /* R251 */
+ 0x0001, /* R252 - General test 1 */
+};
+
+struct wm8961_priv {
+ struct snd_soc_codec codec;
+ int sysclk;
+ u16 reg_cache[WM8961_MAX_REGISTER];
+};
+
+static int wm8961_volatile_register(unsigned int reg)
+{
+ switch (reg) {
+ case WM8961_SOFTWARE_RESET:
+ case WM8961_WRITE_SEQUENCER_7:
+ case WM8961_DC_SERVO_1:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+static int wm8961_reset(struct snd_soc_codec *codec)
+{
+ return snd_soc_write(codec, WM8961_SOFTWARE_RESET, 0);
+}
+
+/*
+ * The headphone output supports special anti-pop sequences giving
+ * silent power up and power down.
+ */
+static int wm8961_hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 hp_reg = snd_soc_read(codec, WM8961_ANALOGUE_HP_0);
+ u16 cp_reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_1);
+ u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
+ u16 dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
+ int timeout = 500;
+
+ if (event & SND_SOC_DAPM_POST_PMU) {
+ /* Make sure the output is shorted */
+ hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Enable the charge pump */
+ cp_reg |= WM8961_CP_ENA;
+ snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg);
+ mdelay(5);
+
+ /* Enable the PGA */
+ pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA;
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+
+ /* Enable the amplifier */
+ hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Second stage enable */
+ hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Enable the DC servo & trigger startup */
+ dcs_reg |=
+ WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR |
+ WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL;
+ dev_dbg(codec->dev, "Enabling DC servo\n");
+
+ snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
+ do {
+ msleep(1);
+ dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
+ } while (--timeout &&
+ dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
+ WM8961_DCS_TRIG_STARTUP_HPL));
+ if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
+ WM8961_DCS_TRIG_STARTUP_HPL))
+ dev_err(codec->dev, "DC servo timed out\n");
+ else
+ dev_dbg(codec->dev, "DC servo startup complete\n");
+
+ /* Enable the output stage */
+ hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Remove the short on the output stage */
+ hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT;
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+ }
+
+ if (event & SND_SOC_DAPM_PRE_PMD) {
+ /* Short the output */
+ hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Disable the output stage */
+ hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Disable DC offset cancellation */
+ dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR |
+ WM8961_DCS_ENA_CHAN_HPL);
+ snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
+
+ /* Finish up */
+ hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA |
+ WM8961_HPL_ENA_DLY | WM8961_HPL_ENA);
+ snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
+
+ /* Disable the PGA */
+ pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA);
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+
+ /* Disable the charge pump */
+ dev_dbg(codec->dev, "Disabling charge pump\n");
+ snd_soc_write(codec, WM8961_CHARGE_PUMP_1,
+ cp_reg & ~WM8961_CP_ENA);
+ }
+
+ return 0;
+}
+
+static int wm8961_spk_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
+ u16 spk_reg = snd_soc_read(codec, WM8961_CLASS_D_CONTROL_1);
+
+ if (event & SND_SOC_DAPM_POST_PMU) {
+ /* Enable the PGA */
+ pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA;
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+
+ /* Enable the amplifier */
+ spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA;
+ snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
+ }
+
+ if (event & SND_SOC_DAPM_PRE_PMD) {
+ /* Enable the amplifier */
+ spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA);
+ snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
+
+ /* Enable the PGA */
+ pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA);
+ snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
+ }
+
+ return 0;
+}
+
+static const char *adc_hpf_text[] = {
+ "Hi-fi", "Voice 1", "Voice 2", "Voice 3",
+};
+
+static const struct soc_enum adc_hpf =
+ SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_2, 7, 4, adc_hpf_text);
+
+static const char *dac_deemph_text[] = {
+ "None", "32kHz", "44.1kHz", "48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+ SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_1, 1, 4, dac_deemph_text);
+
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static unsigned int boost_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 1, TLV_DB_SCALE_ITEM(13, 0, 0),
+ 2, 2, TLV_DB_SCALE_ITEM(20, 0, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(29, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0);
+
+static const struct snd_kcontrol_new wm8961_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
+ 0, 127, 0, out_tlv),
+SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2,
+ 6, 3, 7, 0, hp_sec_tlv),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
+ 7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
+ 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
+ 7, 1, 0),
+SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0),
+
+SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0),
+
+SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0,
+ WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv),
+
+SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0),
+SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
+
+SOC_DOUBLE_R_TLV("Capture Volume",
+ WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME,
+ 1, 119, 0, adc_tlv),
+SOC_DOUBLE_R_TLV("Capture Boost Volume",
+ WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH,
+ 4, 3, 0, boost_tlv),
+SOC_DOUBLE_R_TLV("Capture PGA Volume",
+ WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
+ 0, 62, 0, pga_tlv),
+SOC_DOUBLE_R("Capture PGA ZC Switch",
+ WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
+ 6, 1, 1),
+SOC_DOUBLE_R("Capture PGA Switch",
+ WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
+ 7, 1, 1),
+};
+
+static const char *sidetone_text[] = {
+ "None", "Left", "Right"
+};
+
+static const struct soc_enum dacl_sidetone =
+ SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_0, 2, 3, sidetone_text);
+
+static const struct soc_enum dacr_sidetone =
+ SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_1, 2, 3, sidetone_text);
+
+static const struct snd_kcontrol_new dacl_mux =
+ SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone);
+
+static const struct snd_kcontrol_new dacr_mux =
+ SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone);
+
+static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("LINPUT"),
+SND_SOC_DAPM_INPUT("RINPUT"),
+
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0),
+SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0),
+
+SND_SOC_DAPM_MICBIAS("MICBIAS", WM8961_PWR_MGMT_1, 1, 0),
+
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux),
+
+SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0),
+SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0),
+
+/* Handle as a mono path for DCS */
+SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM,
+ 4, 0, NULL, 0, wm8961_hp_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM,
+ 4, 0, NULL, 0, wm8961_spk_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_OUTPUT("HP_L"),
+SND_SOC_DAPM_OUTPUT("HP_R"),
+SND_SOC_DAPM_OUTPUT("SPK_LN"),
+SND_SOC_DAPM_OUTPUT("SPK_LP"),
+SND_SOC_DAPM_OUTPUT("SPK_RN"),
+SND_SOC_DAPM_OUTPUT("SPK_RP"),
+};
+
+
+static const struct snd_soc_dapm_route audio_paths[] = {
+ { "DACL", NULL, "CLK_DSP" },
+ { "DACL", NULL, "DACL Sidetone" },
+ { "DACR", NULL, "CLK_DSP" },
+ { "DACR", NULL, "DACR Sidetone" },
+
+ { "DACL Sidetone", "Left", "ADCL" },
+ { "DACL Sidetone", "Right", "ADCR" },
+
+ { "DACR Sidetone", "Left", "ADCL" },
+ { "DACR Sidetone", "Right", "ADCR" },
+
+ { "HP_L", NULL, "Headphone Output" },
+ { "HP_R", NULL, "Headphone Output" },
+ { "Headphone Output", NULL, "DACL" },
+ { "Headphone Output", NULL, "DACR" },
+
+ { "SPK_LN", NULL, "Speaker Output" },
+ { "SPK_LP", NULL, "Speaker Output" },
+ { "SPK_RN", NULL, "Speaker Output" },
+ { "SPK_RP", NULL, "Speaker Output" },
+
+ { "Speaker Output", NULL, "DACL" },
+ { "Speaker Output", NULL, "DACR" },
+
+ { "ADCL", NULL, "Left Input" },
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "Right Input" },
+ { "ADCR", NULL, "CLK_DSP" },
+
+ { "Left Input", NULL, "LINPUT" },
+ { "Right Input", NULL, "RINPUT" },
+
+};
+
+/* Values for CLK_SYS_RATE */
+static struct {
+ int ratio;
+ u16 val;
+} wm8961_clk_sys_ratio[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 768, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+/* Values for SAMPLE_RATE */
+static struct {
+ int rate;
+ u16 val;
+} wm8961_srate[] = {
+ { 48000, 0 },
+ { 44100, 0 },
+ { 32000, 1 },
+ { 22050, 2 },
+ { 24000, 2 },
+ { 16000, 3 },
+ { 11250, 4 },
+ { 12000, 4 },
+ { 8000, 5 },
+};
+
+static int wm8961_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8961_priv *wm8961 = codec->private_data;
+ int i, best, target, fs;
+ u16 reg;
+
+ fs = params_rate(params);
+
+ if (!wm8961->sysclk) {
+ dev_err(codec->dev, "MCLK has not been specified\n");
+ return -EINVAL;
+ }
+
+ /* Find the closest sample rate for the filters */
+ best = 0;
+ for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) {
+ if (abs(wm8961_srate[i].rate - fs) <
+ abs(wm8961_srate[best].rate - fs))
+ best = i;
+ }
+ reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_3);
+ reg &= ~WM8961_SAMPLE_RATE_MASK;
+ reg |= wm8961_srate[best].val;
+ snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg);
+ dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n",
+ wm8961_srate[best].rate, fs);
+
+ /* Select a CLK_SYS/fs ratio equal to or higher than required */
+ target = wm8961->sysclk / fs;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) {
+ dev_err(codec->dev,
+ "SYSCLK must be at least 64*fs for DAC\n");
+ return -EINVAL;
+ }
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) {
+ dev_err(codec->dev,
+ "SYSCLK must be at least 256*fs for ADC\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) {
+ if (wm8961_clk_sys_ratio[i].ratio >= target)
+ break;
+ }
+ if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) {
+ dev_err(codec->dev, "Unable to generate CLK_SYS_RATE\n");
+ return -EINVAL;
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n",
+ wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs,
+ wm8961->sysclk / fs);
+
+ reg = snd_soc_read(codec, WM8961_CLOCKING_4);
+ reg &= ~WM8961_CLK_SYS_RATE_MASK;
+ reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT;
+ snd_soc_write(codec, WM8961_CLOCKING_4, reg);
+
+ reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
+ reg &= ~WM8961_WL_MASK;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ reg |= 1 << WM8961_WL_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ reg |= 2 << WM8961_WL_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ reg |= 3 << WM8961_WL_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, reg);
+
+ /* Sloping stop-band filter is recommended for <= 24kHz */
+ reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
+ if (fs <= 24000)
+ reg |= WM8961_DACSLOPE;
+ else
+ reg &= WM8961_DACSLOPE;
+ snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
+
+ return 0;
+}
+
+static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq,
+ int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8961_priv *wm8961 = codec->private_data;
+ u16 reg = snd_soc_read(codec, WM8961_CLOCKING1);
+
+ if (freq > 33000000) {
+ dev_err(codec->dev, "MCLK must be <33MHz\n");
+ return -EINVAL;
+ }
+
+ if (freq > 16500000) {
+ dev_dbg(codec->dev, "Using MCLK/2 for %dHz MCLK\n", freq);
+ reg |= WM8961_MCLKDIV;
+ freq /= 2;
+ } else {
+ dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
+ reg &= WM8961_MCLKDIV;
+ }
+
+ snd_soc_write(codec, WM8961_CLOCKING1, reg);
+
+ wm8961->sysclk = freq;
+
+ return 0;
+}
+
+static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 aif = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
+
+ aif &= ~(WM8961_BCLKINV | WM8961_LRP |
+ WM8961_MS | WM8961_FORMAT_MASK);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif |= WM8961_MS;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif |= 1;
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ aif |= 2;
+ break;
+
+ case SND_SOC_DAIFMT_DSP_B:
+ aif |= WM8961_LRP;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif |= 3;
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ case SND_SOC_DAIFMT_IB_NF:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif |= WM8961_LRP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8961_BCLKINV;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif |= WM8961_BCLKINV | WM8961_LRP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, aif);
+}
+
+static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_2);
+
+ if (tristate)
+ reg |= WM8961_TRIS;
+ else
+ reg &= ~WM8961_TRIS;
+
+ return snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg);
+}
+
+static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_1);
+
+ if (mute)
+ reg |= WM8961_DACMU;
+ else
+ reg &= ~WM8961_DACMU;
+
+ msleep(17);
+
+ return snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_1, reg);
+}
+
+static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 reg;
+
+ switch (div_id) {
+ case WM8961_BCLK:
+ reg = snd_soc_read(codec, WM8961_CLOCKING2);
+ reg &= ~WM8961_BCLKDIV_MASK;
+ reg |= div;
+ snd_soc_write(codec, WM8961_CLOCKING2, reg);
+ break;
+
+ case WM8961_LRCLK:
+ reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_2);
+ reg &= ~WM8961_LRCLK_RATE_MASK;
+ reg |= div;
+ snd_soc_write(codec, WM8961_AUDIO_INTERFACE_2, reg);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8961_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u16 reg;
+
+ /* This is all slightly unusual since we have no bypass paths
+ * and the output amplifier structure means we can just slam
+ * the biases straight up rather than having to ramp them
+ * slowly.
+ */
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ if (codec->bias_level == SND_SOC_BIAS_STANDBY) {
+ /* Enable bias generation */
+ reg = snd_soc_read(codec, WM8961_ANTI_POP);
+ reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN;
+ snd_soc_write(codec, WM8961_ANTI_POP, reg);
+
+ /* VMID=2*50k, VREF */
+ reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
+ reg &= ~WM8961_VMIDSEL_MASK;
+ reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF;
+ snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
+ }
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_PREPARE) {
+ /* VREF off */
+ reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
+ reg &= ~WM8961_VREF;
+ snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
+
+ /* Bias generation off */
+ reg = snd_soc_read(codec, WM8961_ANTI_POP);
+ reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN);
+ snd_soc_write(codec, WM8961_ANTI_POP, reg);
+
+ /* VMID off */
+ reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
+ reg &= ~WM8961_VMIDSEL_MASK;
+ snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ break;
+ }
+
+ codec->bias_level = level;
+
+ return 0;
+}
+
+
+#define WM8961_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8961_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8961_dai_ops = {
+ .hw_params = wm8961_hw_params,
+ .set_sysclk = wm8961_set_sysclk,
+ .set_fmt = wm8961_set_fmt,
+ .digital_mute = wm8961_digital_mute,
+ .set_tristate = wm8961_set_tristate,
+ .set_clkdiv = wm8961_set_clkdiv,
+};
+
+struct snd_soc_dai wm8961_dai = {
+ .name = "WM8961",
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8961_RATES,
+ .formats = WM8961_FORMATS,},
+ .capture = {
+ .stream_name = "HiFi Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8961_RATES,
+ .formats = WM8961_FORMATS,},
+ .ops = &wm8961_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8961_dai);
+
+
+static struct snd_soc_codec *wm8961_codec;
+
+static int wm8961_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8961_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8961_codec;
+ codec = wm8961_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8961_snd_controls,
+ ARRAY_SIZE(wm8961_snd_controls));
+ snd_soc_dapm_new_controls(codec, wm8961_dapm_widgets,
+ ARRAY_SIZE(wm8961_dapm_widgets));
+ snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+static int wm8961_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8961_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8961_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ u16 *reg_cache = codec->reg_cache;
+ int i;
+
+ for (i = 0; i < codec->reg_cache_size; i++) {
+ if (i == WM8961_SOFTWARE_RESET)
+ continue;
+
+ snd_soc_write(codec, i, reg_cache[i]);
+ }
+
+ wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ return 0;
+}
+#else
+#define wm8961_suspend NULL
+#define wm8961_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_wm8961 = {
+ .probe = wm8961_probe,
+ .remove = wm8961_remove,
+ .suspend = wm8961_suspend,
+ .resume = wm8961_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8961);
+
+static int wm8961_register(struct wm8961_priv *wm8961)
+{
+ struct snd_soc_codec *codec = &wm8961->codec;
+ int ret;
+ u16 reg;
+
+ if (wm8961_codec) {
+ dev_err(codec->dev, "Another WM8961 is registered\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8961;
+ codec->name = "WM8961";
+ codec->owner = THIS_MODULE;
+ codec->dai = &wm8961_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = ARRAY_SIZE(wm8961->reg_cache);
+ codec->reg_cache = &wm8961->reg_cache;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8961_set_bias_level;
+ codec->volatile_register = wm8961_volatile_register;
+
+ memcpy(codec->reg_cache, wm8961_reg_defaults,
+ sizeof(wm8961_reg_defaults));
+
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ reg = snd_soc_read(codec, WM8961_SOFTWARE_RESET);
+ if (reg != 0x1801) {
+ dev_err(codec->dev, "Device is not a WM8961: ID=0x%x\n", reg);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* This isn't volatile - readback doesn't correspond to write */
+ reg = codec->hw_read(codec, WM8961_RIGHT_INPUT_VOLUME);
+ dev_info(codec->dev, "WM8961 family %d revision %c\n",
+ (reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT,
+ ((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT)
+ + 'A');
+
+ ret = wm8961_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ return ret;
+ }
+
+ /* Enable class W */
+ reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_B);
+ reg |= WM8961_CP_DYN_PWR_MASK;
+ snd_soc_write(codec, WM8961_CHARGE_PUMP_B, reg);
+
+ /* Latch volume update bits (right channel only, we always
+ * write both out) and default ZC on. */
+ reg = snd_soc_read(codec, WM8961_ROUT1_VOLUME);
+ snd_soc_write(codec, WM8961_ROUT1_VOLUME,
+ reg | WM8961_LO1ZC | WM8961_OUT1VU);
+ snd_soc_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC);
+ reg = snd_soc_read(codec, WM8961_ROUT2_VOLUME);
+ snd_soc_write(codec, WM8961_ROUT2_VOLUME,
+ reg | WM8961_SPKRZC | WM8961_SPKVU);
+ snd_soc_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC);
+
+ reg = snd_soc_read(codec, WM8961_RIGHT_ADC_VOLUME);
+ snd_soc_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU);
+ reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME);
+ snd_soc_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU);
+
+ /* Use soft mute by default */
+ reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
+ reg |= WM8961_DACSMM;
+ snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
+
+ /* Use automatic clocking mode by default; for now this is all
+ * we support.
+ */
+ reg = snd_soc_read(codec, WM8961_CLOCKING_3);
+ reg &= ~WM8961_MANUAL_MODE;
+ snd_soc_write(codec, WM8961_CLOCKING_3, reg);
+
+ wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8961_dai.dev = codec->dev;
+
+ wm8961_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_register_dai(&wm8961_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ snd_soc_unregister_codec(codec);
+ return ret;
+ }
+
+ return 0;
+
+err:
+ kfree(wm8961);
+ return ret;
+}
+
+static void wm8961_unregister(struct wm8961_priv *wm8961)
+{
+ wm8961_set_bias_level(&wm8961->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&wm8961_dai);
+ snd_soc_unregister_codec(&wm8961->codec);
+ kfree(wm8961);
+ wm8961_codec = NULL;
+}
+
+static __devinit int wm8961_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8961_priv *wm8961;
+ struct snd_soc_codec *codec;
+
+ wm8961 = kzalloc(sizeof(struct wm8961_priv), GFP_KERNEL);
+ if (wm8961 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8961->codec;
+
+ i2c_set_clientdata(i2c, wm8961);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8961_register(wm8961);
+}
+
+static __devexit int wm8961_i2c_remove(struct i2c_client *client)
+{
+ struct wm8961_priv *wm8961 = i2c_get_clientdata(client);
+ wm8961_unregister(wm8961);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8961_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8961_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8961_i2c_suspend NULL
+#define wm8961_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8961_i2c_id[] = {
+ { "wm8961", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id);
+
+static struct i2c_driver wm8961_i2c_driver = {
+ .driver = {
+ .name = "wm8961",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8961_i2c_probe,
+ .remove = __devexit_p(wm8961_i2c_remove),
+ .suspend = wm8961_i2c_suspend,
+ .resume = wm8961_i2c_resume,
+ .id_table = wm8961_i2c_id,
+};
+
+static int __init wm8961_modinit(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm8961_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register WM8961 I2C driver: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+module_init(wm8961_modinit);
+
+static void __exit wm8961_exit(void)
+{
+ i2c_del_driver(&wm8961_i2c_driver);
+}
+module_exit(wm8961_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8961 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8961.h b/sound/soc/codecs/wm8961.h
new file mode 100644
index 0000000..5513bfd7
--- /dev/null
+++ b/sound/soc/codecs/wm8961.h
@@ -0,0 +1,866 @@
+/*
+ * wm8961.h -- WM8961 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8961_H
+#define _WM8961_H
+
+#include <sound/soc.h>
+
+extern struct snd_soc_codec_device soc_codec_dev_wm8961;
+extern struct snd_soc_dai wm8961_dai;
+
+#define WM8961_BCLK 1
+#define WM8961_LRCLK 2
+
+#define WM8961_BCLK_DIV_1 0
+#define WM8961_BCLK_DIV_1_5 1
+#define WM8961_BCLK_DIV_2 2
+#define WM8961_BCLK_DIV_3 3
+#define WM8961_BCLK_DIV_4 4
+#define WM8961_BCLK_DIV_5_5 5
+#define WM8961_BCLK_DIV_6 6
+#define WM8961_BCLK_DIV_8 7
+#define WM8961_BCLK_DIV_11 8
+#define WM8961_BCLK_DIV_12 9
+#define WM8961_BCLK_DIV_16 10
+#define WM8961_BCLK_DIV_24 11
+#define WM8961_BCLK_DIV_32 13
+
+
+/*
+ * Register values.
+ */
+#define WM8961_LEFT_INPUT_VOLUME 0x00
+#define WM8961_RIGHT_INPUT_VOLUME 0x01
+#define WM8961_LOUT1_VOLUME 0x02
+#define WM8961_ROUT1_VOLUME 0x03
+#define WM8961_CLOCKING1 0x04
+#define WM8961_ADC_DAC_CONTROL_1 0x05
+#define WM8961_ADC_DAC_CONTROL_2 0x06
+#define WM8961_AUDIO_INTERFACE_0 0x07
+#define WM8961_CLOCKING2 0x08
+#define WM8961_AUDIO_INTERFACE_1 0x09
+#define WM8961_LEFT_DAC_VOLUME 0x0A
+#define WM8961_RIGHT_DAC_VOLUME 0x0B
+#define WM8961_AUDIO_INTERFACE_2 0x0E
+#define WM8961_SOFTWARE_RESET 0x0F
+#define WM8961_ALC1 0x11
+#define WM8961_ALC2 0x12
+#define WM8961_ALC3 0x13
+#define WM8961_NOISE_GATE 0x14
+#define WM8961_LEFT_ADC_VOLUME 0x15
+#define WM8961_RIGHT_ADC_VOLUME 0x16
+#define WM8961_ADDITIONAL_CONTROL_1 0x17
+#define WM8961_ADDITIONAL_CONTROL_2 0x18
+#define WM8961_PWR_MGMT_1 0x19
+#define WM8961_PWR_MGMT_2 0x1A
+#define WM8961_ADDITIONAL_CONTROL_3 0x1B
+#define WM8961_ANTI_POP 0x1C
+#define WM8961_CLOCKING_3 0x1E
+#define WM8961_ADCL_SIGNAL_PATH 0x20
+#define WM8961_ADCR_SIGNAL_PATH 0x21
+#define WM8961_LOUT2_VOLUME 0x28
+#define WM8961_ROUT2_VOLUME 0x29
+#define WM8961_PWR_MGMT_3 0x2F
+#define WM8961_ADDITIONAL_CONTROL_4 0x30
+#define WM8961_CLASS_D_CONTROL_1 0x31
+#define WM8961_CLASS_D_CONTROL_2 0x33
+#define WM8961_CLOCKING_4 0x38
+#define WM8961_DSP_SIDETONE_0 0x39
+#define WM8961_DSP_SIDETONE_1 0x3A
+#define WM8961_DC_SERVO_0 0x3C
+#define WM8961_DC_SERVO_1 0x3D
+#define WM8961_DC_SERVO_3 0x3F
+#define WM8961_DC_SERVO_5 0x41
+#define WM8961_ANALOGUE_PGA_BIAS 0x44
+#define WM8961_ANALOGUE_HP_0 0x45
+#define WM8961_ANALOGUE_HP_2 0x47
+#define WM8961_CHARGE_PUMP_1 0x48
+#define WM8961_CHARGE_PUMP_B 0x52
+#define WM8961_WRITE_SEQUENCER_1 0x57
+#define WM8961_WRITE_SEQUENCER_2 0x58
+#define WM8961_WRITE_SEQUENCER_3 0x59
+#define WM8961_WRITE_SEQUENCER_4 0x5A
+#define WM8961_WRITE_SEQUENCER_5 0x5B
+#define WM8961_WRITE_SEQUENCER_6 0x5C
+#define WM8961_WRITE_SEQUENCER_7 0x5D
+#define WM8961_GENERAL_TEST_1 0xFC
+
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Left Input volume
+ */
+#define WM8961_IPVU 0x0100 /* IPVU */
+#define WM8961_IPVU_MASK 0x0100 /* IPVU */
+#define WM8961_IPVU_SHIFT 8 /* IPVU */
+#define WM8961_IPVU_WIDTH 1 /* IPVU */
+#define WM8961_LINMUTE 0x0080 /* LINMUTE */
+#define WM8961_LINMUTE_MASK 0x0080 /* LINMUTE */
+#define WM8961_LINMUTE_SHIFT 7 /* LINMUTE */
+#define WM8961_LINMUTE_WIDTH 1 /* LINMUTE */
+#define WM8961_LIZC 0x0040 /* LIZC */
+#define WM8961_LIZC_MASK 0x0040 /* LIZC */
+#define WM8961_LIZC_SHIFT 6 /* LIZC */
+#define WM8961_LIZC_WIDTH 1 /* LIZC */
+#define WM8961_LINVOL_MASK 0x003F /* LINVOL - [5:0] */
+#define WM8961_LINVOL_SHIFT 0 /* LINVOL - [5:0] */
+#define WM8961_LINVOL_WIDTH 6 /* LINVOL - [5:0] */
+
+/*
+ * R1 (0x01) - Right Input volume
+ */
+#define WM8961_DEVICE_ID_MASK 0xF000 /* DEVICE_ID - [15:12] */
+#define WM8961_DEVICE_ID_SHIFT 12 /* DEVICE_ID - [15:12] */
+#define WM8961_DEVICE_ID_WIDTH 4 /* DEVICE_ID - [15:12] */
+#define WM8961_CHIP_REV_MASK 0x0E00 /* CHIP_REV - [11:9] */
+#define WM8961_CHIP_REV_SHIFT 9 /* CHIP_REV - [11:9] */
+#define WM8961_CHIP_REV_WIDTH 3 /* CHIP_REV - [11:9] */
+#define WM8961_IPVU 0x0100 /* IPVU */
+#define WM8961_IPVU_MASK 0x0100 /* IPVU */
+#define WM8961_IPVU_SHIFT 8 /* IPVU */
+#define WM8961_IPVU_WIDTH 1 /* IPVU */
+#define WM8961_RINMUTE 0x0080 /* RINMUTE */
+#define WM8961_RINMUTE_MASK 0x0080 /* RINMUTE */
+#define WM8961_RINMUTE_SHIFT 7 /* RINMUTE */
+#define WM8961_RINMUTE_WIDTH 1 /* RINMUTE */
+#define WM8961_RIZC 0x0040 /* RIZC */
+#define WM8961_RIZC_MASK 0x0040 /* RIZC */
+#define WM8961_RIZC_SHIFT 6 /* RIZC */
+#define WM8961_RIZC_WIDTH 1 /* RIZC */
+#define WM8961_RINVOL_MASK 0x003F /* RINVOL - [5:0] */
+#define WM8961_RINVOL_SHIFT 0 /* RINVOL - [5:0] */
+#define WM8961_RINVOL_WIDTH 6 /* RINVOL - [5:0] */
+
+/*
+ * R2 (0x02) - LOUT1 volume
+ */
+#define WM8961_OUT1VU 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_MASK 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_SHIFT 8 /* OUT1VU */
+#define WM8961_OUT1VU_WIDTH 1 /* OUT1VU */
+#define WM8961_LO1ZC 0x0080 /* LO1ZC */
+#define WM8961_LO1ZC_MASK 0x0080 /* LO1ZC */
+#define WM8961_LO1ZC_SHIFT 7 /* LO1ZC */
+#define WM8961_LO1ZC_WIDTH 1 /* LO1ZC */
+#define WM8961_LOUT1VOL_MASK 0x007F /* LOUT1VOL - [6:0] */
+#define WM8961_LOUT1VOL_SHIFT 0 /* LOUT1VOL - [6:0] */
+#define WM8961_LOUT1VOL_WIDTH 7 /* LOUT1VOL - [6:0] */
+
+/*
+ * R3 (0x03) - ROUT1 volume
+ */
+#define WM8961_OUT1VU 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_MASK 0x0100 /* OUT1VU */
+#define WM8961_OUT1VU_SHIFT 8 /* OUT1VU */
+#define WM8961_OUT1VU_WIDTH 1 /* OUT1VU */
+#define WM8961_RO1ZC 0x0080 /* RO1ZC */
+#define WM8961_RO1ZC_MASK 0x0080 /* RO1ZC */
+#define WM8961_RO1ZC_SHIFT 7 /* RO1ZC */
+#define WM8961_RO1ZC_WIDTH 1 /* RO1ZC */
+#define WM8961_ROUT1VOL_MASK 0x007F /* ROUT1VOL - [6:0] */
+#define WM8961_ROUT1VOL_SHIFT 0 /* ROUT1VOL - [6:0] */
+#define WM8961_ROUT1VOL_WIDTH 7 /* ROUT1VOL - [6:0] */
+
+/*
+ * R4 (0x04) - Clocking1
+ */
+#define WM8961_ADCDIV_MASK 0x01C0 /* ADCDIV - [8:6] */
+#define WM8961_ADCDIV_SHIFT 6 /* ADCDIV - [8:6] */
+#define WM8961_ADCDIV_WIDTH 3 /* ADCDIV - [8:6] */
+#define WM8961_DACDIV_MASK 0x0038 /* DACDIV - [5:3] */
+#define WM8961_DACDIV_SHIFT 3 /* DACDIV - [5:3] */
+#define WM8961_DACDIV_WIDTH 3 /* DACDIV - [5:3] */
+#define WM8961_MCLKDIV 0x0004 /* MCLKDIV */
+#define WM8961_MCLKDIV_MASK 0x0004 /* MCLKDIV */
+#define WM8961_MCLKDIV_SHIFT 2 /* MCLKDIV */
+#define WM8961_MCLKDIV_WIDTH 1 /* MCLKDIV */
+
+/*
+ * R5 (0x05) - ADC & DAC Control 1
+ */
+#define WM8961_ADCPOL_MASK 0x0060 /* ADCPOL - [6:5] */
+#define WM8961_ADCPOL_SHIFT 5 /* ADCPOL - [6:5] */
+#define WM8961_ADCPOL_WIDTH 2 /* ADCPOL - [6:5] */
+#define WM8961_DACMU 0x0008 /* DACMU */
+#define WM8961_DACMU_MASK 0x0008 /* DACMU */
+#define WM8961_DACMU_SHIFT 3 /* DACMU */
+#define WM8961_DACMU_WIDTH 1 /* DACMU */
+#define WM8961_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */
+#define WM8961_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */
+#define WM8961_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */
+#define WM8961_ADCHPD 0x0001 /* ADCHPD */
+#define WM8961_ADCHPD_MASK 0x0001 /* ADCHPD */
+#define WM8961_ADCHPD_SHIFT 0 /* ADCHPD */
+#define WM8961_ADCHPD_WIDTH 1 /* ADCHPD */
+
+/*
+ * R6 (0x06) - ADC & DAC Control 2
+ */
+#define WM8961_ADC_HPF_CUT_MASK 0x0180 /* ADC_HPF_CUT - [8:7] */
+#define WM8961_ADC_HPF_CUT_SHIFT 7 /* ADC_HPF_CUT - [8:7] */
+#define WM8961_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [8:7] */
+#define WM8961_DACPOL_MASK 0x0060 /* DACPOL - [6:5] */
+#define WM8961_DACPOL_SHIFT 5 /* DACPOL - [6:5] */
+#define WM8961_DACPOL_WIDTH 2 /* DACPOL - [6:5] */
+#define WM8961_DACSMM 0x0008 /* DACSMM */
+#define WM8961_DACSMM_MASK 0x0008 /* DACSMM */
+#define WM8961_DACSMM_SHIFT 3 /* DACSMM */
+#define WM8961_DACSMM_WIDTH 1 /* DACSMM */
+#define WM8961_DACMR 0x0004 /* DACMR */
+#define WM8961_DACMR_MASK 0x0004 /* DACMR */
+#define WM8961_DACMR_SHIFT 2 /* DACMR */
+#define WM8961_DACMR_WIDTH 1 /* DACMR */
+#define WM8961_DACSLOPE 0x0002 /* DACSLOPE */
+#define WM8961_DACSLOPE_MASK 0x0002 /* DACSLOPE */
+#define WM8961_DACSLOPE_SHIFT 1 /* DACSLOPE */
+#define WM8961_DACSLOPE_WIDTH 1 /* DACSLOPE */
+#define WM8961_DAC_OSR128 0x0001 /* DAC_OSR128 */
+#define WM8961_DAC_OSR128_MASK 0x0001 /* DAC_OSR128 */
+#define WM8961_DAC_OSR128_SHIFT 0 /* DAC_OSR128 */
+#define WM8961_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */
+
+/*
+ * R7 (0x07) - Audio Interface 0
+ */
+#define WM8961_ALRSWAP 0x0100 /* ALRSWAP */
+#define WM8961_ALRSWAP_MASK 0x0100 /* ALRSWAP */
+#define WM8961_ALRSWAP_SHIFT 8 /* ALRSWAP */
+#define WM8961_ALRSWAP_WIDTH 1 /* ALRSWAP */
+#define WM8961_BCLKINV 0x0080 /* BCLKINV */
+#define WM8961_BCLKINV_MASK 0x0080 /* BCLKINV */
+#define WM8961_BCLKINV_SHIFT 7 /* BCLKINV */
+#define WM8961_BCLKINV_WIDTH 1 /* BCLKINV */
+#define WM8961_MS 0x0040 /* MS */
+#define WM8961_MS_MASK 0x0040 /* MS */
+#define WM8961_MS_SHIFT 6 /* MS */
+#define WM8961_MS_WIDTH 1 /* MS */
+#define WM8961_DLRSWAP 0x0020 /* DLRSWAP */
+#define WM8961_DLRSWAP_MASK 0x0020 /* DLRSWAP */
+#define WM8961_DLRSWAP_SHIFT 5 /* DLRSWAP */
+#define WM8961_DLRSWAP_WIDTH 1 /* DLRSWAP */
+#define WM8961_LRP 0x0010 /* LRP */
+#define WM8961_LRP_MASK 0x0010 /* LRP */
+#define WM8961_LRP_SHIFT 4 /* LRP */
+#define WM8961_LRP_WIDTH 1 /* LRP */
+#define WM8961_WL_MASK 0x000C /* WL - [3:2] */
+#define WM8961_WL_SHIFT 2 /* WL - [3:2] */
+#define WM8961_WL_WIDTH 2 /* WL - [3:2] */
+#define WM8961_FORMAT_MASK 0x0003 /* FORMAT - [1:0] */
+#define WM8961_FORMAT_SHIFT 0 /* FORMAT - [1:0] */
+#define WM8961_FORMAT_WIDTH 2 /* FORMAT - [1:0] */
+
+/*
+ * R8 (0x08) - Clocking2
+ */
+#define WM8961_DCLKDIV_MASK 0x01C0 /* DCLKDIV - [8:6] */
+#define WM8961_DCLKDIV_SHIFT 6 /* DCLKDIV - [8:6] */
+#define WM8961_DCLKDIV_WIDTH 3 /* DCLKDIV - [8:6] */
+#define WM8961_CLK_SYS_ENA 0x0020 /* CLK_SYS_ENA */
+#define WM8961_CLK_SYS_ENA_MASK 0x0020 /* CLK_SYS_ENA */
+#define WM8961_CLK_SYS_ENA_SHIFT 5 /* CLK_SYS_ENA */
+#define WM8961_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */
+#define WM8961_CLK_DSP_ENA 0x0010 /* CLK_DSP_ENA */
+#define WM8961_CLK_DSP_ENA_MASK 0x0010 /* CLK_DSP_ENA */
+#define WM8961_CLK_DSP_ENA_SHIFT 4 /* CLK_DSP_ENA */
+#define WM8961_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */
+#define WM8961_BCLKDIV_MASK 0x000F /* BCLKDIV - [3:0] */
+#define WM8961_BCLKDIV_SHIFT 0 /* BCLKDIV - [3:0] */
+#define WM8961_BCLKDIV_WIDTH 4 /* BCLKDIV - [3:0] */
+
+/*
+ * R9 (0x09) - Audio Interface 1
+ */
+#define WM8961_DACCOMP_MASK 0x0018 /* DACCOMP - [4:3] */
+#define WM8961_DACCOMP_SHIFT 3 /* DACCOMP - [4:3] */
+#define WM8961_DACCOMP_WIDTH 2 /* DACCOMP - [4:3] */
+#define WM8961_ADCCOMP_MASK 0x0006 /* ADCCOMP - [2:1] */
+#define WM8961_ADCCOMP_SHIFT 1 /* ADCCOMP - [2:1] */
+#define WM8961_ADCCOMP_WIDTH 2 /* ADCCOMP - [2:1] */
+#define WM8961_LOOPBACK 0x0001 /* LOOPBACK */
+#define WM8961_LOOPBACK_MASK 0x0001 /* LOOPBACK */
+#define WM8961_LOOPBACK_SHIFT 0 /* LOOPBACK */
+#define WM8961_LOOPBACK_WIDTH 1 /* LOOPBACK */
+
+/*
+ * R10 (0x0A) - Left DAC volume
+ */
+#define WM8961_DACVU 0x0100 /* DACVU */
+#define WM8961_DACVU_MASK 0x0100 /* DACVU */
+#define WM8961_DACVU_SHIFT 8 /* DACVU */
+#define WM8961_DACVU_WIDTH 1 /* DACVU */
+#define WM8961_LDACVOL_MASK 0x00FF /* LDACVOL - [7:0] */
+#define WM8961_LDACVOL_SHIFT 0 /* LDACVOL - [7:0] */
+#define WM8961_LDACVOL_WIDTH 8 /* LDACVOL - [7:0] */
+
+/*
+ * R11 (0x0B) - Right DAC volume
+ */
+#define WM8961_DACVU 0x0100 /* DACVU */
+#define WM8961_DACVU_MASK 0x0100 /* DACVU */
+#define WM8961_DACVU_SHIFT 8 /* DACVU */
+#define WM8961_DACVU_WIDTH 1 /* DACVU */
+#define WM8961_RDACVOL_MASK 0x00FF /* RDACVOL - [7:0] */
+#define WM8961_RDACVOL_SHIFT 0 /* RDACVOL - [7:0] */
+#define WM8961_RDACVOL_WIDTH 8 /* RDACVOL - [7:0] */
+
+/*
+ * R14 (0x0E) - Audio Interface 2
+ */
+#define WM8961_LRCLK_RATE_MASK 0x01FF /* LRCLK_RATE - [8:0] */
+#define WM8961_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [8:0] */
+#define WM8961_LRCLK_RATE_WIDTH 9 /* LRCLK_RATE - [8:0] */
+
+/*
+ * R15 (0x0F) - Software Reset
+ */
+#define WM8961_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */
+#define WM8961_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */
+#define WM8961_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */
+
+/*
+ * R17 (0x11) - ALC1
+ */
+#define WM8961_ALCSEL_MASK 0x0180 /* ALCSEL - [8:7] */
+#define WM8961_ALCSEL_SHIFT 7 /* ALCSEL - [8:7] */
+#define WM8961_ALCSEL_WIDTH 2 /* ALCSEL - [8:7] */
+#define WM8961_MAXGAIN_MASK 0x0070 /* MAXGAIN - [6:4] */
+#define WM8961_MAXGAIN_SHIFT 4 /* MAXGAIN - [6:4] */
+#define WM8961_MAXGAIN_WIDTH 3 /* MAXGAIN - [6:4] */
+#define WM8961_ALCL_MASK 0x000F /* ALCL - [3:0] */
+#define WM8961_ALCL_SHIFT 0 /* ALCL - [3:0] */
+#define WM8961_ALCL_WIDTH 4 /* ALCL - [3:0] */
+
+/*
+ * R18 (0x12) - ALC2
+ */
+#define WM8961_ALCZC 0x0080 /* ALCZC */
+#define WM8961_ALCZC_MASK 0x0080 /* ALCZC */
+#define WM8961_ALCZC_SHIFT 7 /* ALCZC */
+#define WM8961_ALCZC_WIDTH 1 /* ALCZC */
+#define WM8961_MINGAIN_MASK 0x0070 /* MINGAIN - [6:4] */
+#define WM8961_MINGAIN_SHIFT 4 /* MINGAIN - [6:4] */
+#define WM8961_MINGAIN_WIDTH 3 /* MINGAIN - [6:4] */
+#define WM8961_HLD_MASK 0x000F /* HLD - [3:0] */
+#define WM8961_HLD_SHIFT 0 /* HLD - [3:0] */
+#define WM8961_HLD_WIDTH 4 /* HLD - [3:0] */
+
+/*
+ * R19 (0x13) - ALC3
+ */
+#define WM8961_ALCMODE 0x0100 /* ALCMODE */
+#define WM8961_ALCMODE_MASK 0x0100 /* ALCMODE */
+#define WM8961_ALCMODE_SHIFT 8 /* ALCMODE */
+#define WM8961_ALCMODE_WIDTH 1 /* ALCMODE */
+#define WM8961_DCY_MASK 0x00F0 /* DCY - [7:4] */
+#define WM8961_DCY_SHIFT 4 /* DCY - [7:4] */
+#define WM8961_DCY_WIDTH 4 /* DCY - [7:4] */
+#define WM8961_ATK_MASK 0x000F /* ATK - [3:0] */
+#define WM8961_ATK_SHIFT 0 /* ATK - [3:0] */
+#define WM8961_ATK_WIDTH 4 /* ATK - [3:0] */
+
+/*
+ * R20 (0x14) - Noise Gate
+ */
+#define WM8961_NGTH_MASK 0x00F8 /* NGTH - [7:3] */
+#define WM8961_NGTH_SHIFT 3 /* NGTH - [7:3] */
+#define WM8961_NGTH_WIDTH 5 /* NGTH - [7:3] */
+#define WM8961_NGG 0x0002 /* NGG */
+#define WM8961_NGG_MASK 0x0002 /* NGG */
+#define WM8961_NGG_SHIFT 1 /* NGG */
+#define WM8961_NGG_WIDTH 1 /* NGG */
+#define WM8961_NGAT 0x0001 /* NGAT */
+#define WM8961_NGAT_MASK 0x0001 /* NGAT */
+#define WM8961_NGAT_SHIFT 0 /* NGAT */
+#define WM8961_NGAT_WIDTH 1 /* NGAT */
+
+/*
+ * R21 (0x15) - Left ADC volume
+ */
+#define WM8961_ADCVU 0x0100 /* ADCVU */
+#define WM8961_ADCVU_MASK 0x0100 /* ADCVU */
+#define WM8961_ADCVU_SHIFT 8 /* ADCVU */
+#define WM8961_ADCVU_WIDTH 1 /* ADCVU */
+#define WM8961_LADCVOL_MASK 0x00FF /* LADCVOL - [7:0] */
+#define WM8961_LADCVOL_SHIFT 0 /* LADCVOL - [7:0] */
+#define WM8961_LADCVOL_WIDTH 8 /* LADCVOL - [7:0] */
+
+/*
+ * R22 (0x16) - Right ADC volume
+ */
+#define WM8961_ADCVU 0x0100 /* ADCVU */
+#define WM8961_ADCVU_MASK 0x0100 /* ADCVU */
+#define WM8961_ADCVU_SHIFT 8 /* ADCVU */
+#define WM8961_ADCVU_WIDTH 1 /* ADCVU */
+#define WM8961_RADCVOL_MASK 0x00FF /* RADCVOL - [7:0] */
+#define WM8961_RADCVOL_SHIFT 0 /* RADCVOL - [7:0] */
+#define WM8961_RADCVOL_WIDTH 8 /* RADCVOL - [7:0] */
+
+/*
+ * R23 (0x17) - Additional control(1)
+ */
+#define WM8961_TSDEN 0x0100 /* TSDEN */
+#define WM8961_TSDEN_MASK 0x0100 /* TSDEN */
+#define WM8961_TSDEN_SHIFT 8 /* TSDEN */
+#define WM8961_TSDEN_WIDTH 1 /* TSDEN */
+#define WM8961_DMONOMIX 0x0010 /* DMONOMIX */
+#define WM8961_DMONOMIX_MASK 0x0010 /* DMONOMIX */
+#define WM8961_DMONOMIX_SHIFT 4 /* DMONOMIX */
+#define WM8961_DMONOMIX_WIDTH 1 /* DMONOMIX */
+#define WM8961_TOEN 0x0001 /* TOEN */
+#define WM8961_TOEN_MASK 0x0001 /* TOEN */
+#define WM8961_TOEN_SHIFT 0 /* TOEN */
+#define WM8961_TOEN_WIDTH 1 /* TOEN */
+
+/*
+ * R24 (0x18) - Additional control(2)
+ */
+#define WM8961_TRIS 0x0008 /* TRIS */
+#define WM8961_TRIS_MASK 0x0008 /* TRIS */
+#define WM8961_TRIS_SHIFT 3 /* TRIS */
+#define WM8961_TRIS_WIDTH 1 /* TRIS */
+
+/*
+ * R25 (0x19) - Pwr Mgmt (1)
+ */
+#define WM8961_VMIDSEL_MASK 0x0180 /* VMIDSEL - [8:7] */
+#define WM8961_VMIDSEL_SHIFT 7 /* VMIDSEL - [8:7] */
+#define WM8961_VMIDSEL_WIDTH 2 /* VMIDSEL - [8:7] */
+#define WM8961_VREF 0x0040 /* VREF */
+#define WM8961_VREF_MASK 0x0040 /* VREF */
+#define WM8961_VREF_SHIFT 6 /* VREF */
+#define WM8961_VREF_WIDTH 1 /* VREF */
+#define WM8961_AINL 0x0020 /* AINL */
+#define WM8961_AINL_MASK 0x0020 /* AINL */
+#define WM8961_AINL_SHIFT 5 /* AINL */
+#define WM8961_AINL_WIDTH 1 /* AINL */
+#define WM8961_AINR 0x0010 /* AINR */
+#define WM8961_AINR_MASK 0x0010 /* AINR */
+#define WM8961_AINR_SHIFT 4 /* AINR */
+#define WM8961_AINR_WIDTH 1 /* AINR */
+#define WM8961_ADCL 0x0008 /* ADCL */
+#define WM8961_ADCL_MASK 0x0008 /* ADCL */
+#define WM8961_ADCL_SHIFT 3 /* ADCL */
+#define WM8961_ADCL_WIDTH 1 /* ADCL */
+#define WM8961_ADCR 0x0004 /* ADCR */
+#define WM8961_ADCR_MASK 0x0004 /* ADCR */
+#define WM8961_ADCR_SHIFT 2 /* ADCR */
+#define WM8961_ADCR_WIDTH 1 /* ADCR */
+#define WM8961_MICB 0x0002 /* MICB */
+#define WM8961_MICB_MASK 0x0002 /* MICB */
+#define WM8961_MICB_SHIFT 1 /* MICB */
+#define WM8961_MICB_WIDTH 1 /* MICB */
+
+/*
+ * R26 (0x1A) - Pwr Mgmt (2)
+ */
+#define WM8961_DACL 0x0100 /* DACL */
+#define WM8961_DACL_MASK 0x0100 /* DACL */
+#define WM8961_DACL_SHIFT 8 /* DACL */
+#define WM8961_DACL_WIDTH 1 /* DACL */
+#define WM8961_DACR 0x0080 /* DACR */
+#define WM8961_DACR_MASK 0x0080 /* DACR */
+#define WM8961_DACR_SHIFT 7 /* DACR */
+#define WM8961_DACR_WIDTH 1 /* DACR */
+#define WM8961_LOUT1_PGA 0x0040 /* LOUT1_PGA */
+#define WM8961_LOUT1_PGA_MASK 0x0040 /* LOUT1_PGA */
+#define WM8961_LOUT1_PGA_SHIFT 6 /* LOUT1_PGA */
+#define WM8961_LOUT1_PGA_WIDTH 1 /* LOUT1_PGA */
+#define WM8961_ROUT1_PGA 0x0020 /* ROUT1_PGA */
+#define WM8961_ROUT1_PGA_MASK 0x0020 /* ROUT1_PGA */
+#define WM8961_ROUT1_PGA_SHIFT 5 /* ROUT1_PGA */
+#define WM8961_ROUT1_PGA_WIDTH 1 /* ROUT1_PGA */
+#define WM8961_SPKL_PGA 0x0010 /* SPKL_PGA */
+#define WM8961_SPKL_PGA_MASK 0x0010 /* SPKL_PGA */
+#define WM8961_SPKL_PGA_SHIFT 4 /* SPKL_PGA */
+#define WM8961_SPKL_PGA_WIDTH 1 /* SPKL_PGA */
+#define WM8961_SPKR_PGA 0x0008 /* SPKR_PGA */
+#define WM8961_SPKR_PGA_MASK 0x0008 /* SPKR_PGA */
+#define WM8961_SPKR_PGA_SHIFT 3 /* SPKR_PGA */
+#define WM8961_SPKR_PGA_WIDTH 1 /* SPKR_PGA */
+
+/*
+ * R27 (0x1B) - Additional Control (3)
+ */
+#define WM8961_SAMPLE_RATE_MASK 0x0007 /* SAMPLE_RATE - [2:0] */
+#define WM8961_SAMPLE_RATE_SHIFT 0 /* SAMPLE_RATE - [2:0] */
+#define WM8961_SAMPLE_RATE_WIDTH 3 /* SAMPLE_RATE - [2:0] */
+
+/*
+ * R28 (0x1C) - Anti-pop
+ */
+#define WM8961_BUFDCOPEN 0x0010 /* BUFDCOPEN */
+#define WM8961_BUFDCOPEN_MASK 0x0010 /* BUFDCOPEN */
+#define WM8961_BUFDCOPEN_SHIFT 4 /* BUFDCOPEN */
+#define WM8961_BUFDCOPEN_WIDTH 1 /* BUFDCOPEN */
+#define WM8961_BUFIOEN 0x0008 /* BUFIOEN */
+#define WM8961_BUFIOEN_MASK 0x0008 /* BUFIOEN */
+#define WM8961_BUFIOEN_SHIFT 3 /* BUFIOEN */
+#define WM8961_BUFIOEN_WIDTH 1 /* BUFIOEN */
+#define WM8961_SOFT_ST 0x0004 /* SOFT_ST */
+#define WM8961_SOFT_ST_MASK 0x0004 /* SOFT_ST */
+#define WM8961_SOFT_ST_SHIFT 2 /* SOFT_ST */
+#define WM8961_SOFT_ST_WIDTH 1 /* SOFT_ST */
+
+/*
+ * R30 (0x1E) - Clocking 3
+ */
+#define WM8961_CLK_TO_DIV_MASK 0x0180 /* CLK_TO_DIV - [8:7] */
+#define WM8961_CLK_TO_DIV_SHIFT 7 /* CLK_TO_DIV - [8:7] */
+#define WM8961_CLK_TO_DIV_WIDTH 2 /* CLK_TO_DIV - [8:7] */
+#define WM8961_CLK_256K_DIV_MASK 0x007E /* CLK_256K_DIV - [6:1] */
+#define WM8961_CLK_256K_DIV_SHIFT 1 /* CLK_256K_DIV - [6:1] */
+#define WM8961_CLK_256K_DIV_WIDTH 6 /* CLK_256K_DIV - [6:1] */
+#define WM8961_MANUAL_MODE 0x0001 /* MANUAL_MODE */
+#define WM8961_MANUAL_MODE_MASK 0x0001 /* MANUAL_MODE */
+#define WM8961_MANUAL_MODE_SHIFT 0 /* MANUAL_MODE */
+#define WM8961_MANUAL_MODE_WIDTH 1 /* MANUAL_MODE */
+
+/*
+ * R32 (0x20) - ADCL signal path
+ */
+#define WM8961_LMICBOOST_MASK 0x0030 /* LMICBOOST - [5:4] */
+#define WM8961_LMICBOOST_SHIFT 4 /* LMICBOOST - [5:4] */
+#define WM8961_LMICBOOST_WIDTH 2 /* LMICBOOST - [5:4] */
+
+/*
+ * R33 (0x21) - ADCR signal path
+ */
+#define WM8961_RMICBOOST_MASK 0x0030 /* RMICBOOST - [5:4] */
+#define WM8961_RMICBOOST_SHIFT 4 /* RMICBOOST - [5:4] */
+#define WM8961_RMICBOOST_WIDTH 2 /* RMICBOOST - [5:4] */
+
+/*
+ * R40 (0x28) - LOUT2 volume
+ */
+#define WM8961_SPKVU 0x0100 /* SPKVU */
+#define WM8961_SPKVU_MASK 0x0100 /* SPKVU */
+#define WM8961_SPKVU_SHIFT 8 /* SPKVU */
+#define WM8961_SPKVU_WIDTH 1 /* SPKVU */
+#define WM8961_SPKLZC 0x0080 /* SPKLZC */
+#define WM8961_SPKLZC_MASK 0x0080 /* SPKLZC */
+#define WM8961_SPKLZC_SHIFT 7 /* SPKLZC */
+#define WM8961_SPKLZC_WIDTH 1 /* SPKLZC */
+#define WM8961_SPKLVOL_MASK 0x007F /* SPKLVOL - [6:0] */
+#define WM8961_SPKLVOL_SHIFT 0 /* SPKLVOL - [6:0] */
+#define WM8961_SPKLVOL_WIDTH 7 /* SPKLVOL - [6:0] */
+
+/*
+ * R41 (0x29) - ROUT2 volume
+ */
+#define WM8961_SPKVU 0x0100 /* SPKVU */
+#define WM8961_SPKVU_MASK 0x0100 /* SPKVU */
+#define WM8961_SPKVU_SHIFT 8 /* SPKVU */
+#define WM8961_SPKVU_WIDTH 1 /* SPKVU */
+#define WM8961_SPKRZC 0x0080 /* SPKRZC */
+#define WM8961_SPKRZC_MASK 0x0080 /* SPKRZC */
+#define WM8961_SPKRZC_SHIFT 7 /* SPKRZC */
+#define WM8961_SPKRZC_WIDTH 1 /* SPKRZC */
+#define WM8961_SPKRVOL_MASK 0x007F /* SPKRVOL - [6:0] */
+#define WM8961_SPKRVOL_SHIFT 0 /* SPKRVOL - [6:0] */
+#define WM8961_SPKRVOL_WIDTH 7 /* SPKRVOL - [6:0] */
+
+/*
+ * R47 (0x2F) - Pwr Mgmt (3)
+ */
+#define WM8961_TEMP_SHUT 0x0002 /* TEMP_SHUT */
+#define WM8961_TEMP_SHUT_MASK 0x0002 /* TEMP_SHUT */
+#define WM8961_TEMP_SHUT_SHIFT 1 /* TEMP_SHUT */
+#define WM8961_TEMP_SHUT_WIDTH 1 /* TEMP_SHUT */
+#define WM8961_TEMP_WARN 0x0001 /* TEMP_WARN */
+#define WM8961_TEMP_WARN_MASK 0x0001 /* TEMP_WARN */
+#define WM8961_TEMP_WARN_SHIFT 0 /* TEMP_WARN */
+#define WM8961_TEMP_WARN_WIDTH 1 /* TEMP_WARN */
+
+/*
+ * R48 (0x30) - Additional Control (4)
+ */
+#define WM8961_TSENSEN 0x0002 /* TSENSEN */
+#define WM8961_TSENSEN_MASK 0x0002 /* TSENSEN */
+#define WM8961_TSENSEN_SHIFT 1 /* TSENSEN */
+#define WM8961_TSENSEN_WIDTH 1 /* TSENSEN */
+#define WM8961_MBSEL 0x0001 /* MBSEL */
+#define WM8961_MBSEL_MASK 0x0001 /* MBSEL */
+#define WM8961_MBSEL_SHIFT 0 /* MBSEL */
+#define WM8961_MBSEL_WIDTH 1 /* MBSEL */
+
+/*
+ * R49 (0x31) - Class D Control 1
+ */
+#define WM8961_SPKR_ENA 0x0080 /* SPKR_ENA */
+#define WM8961_SPKR_ENA_MASK 0x0080 /* SPKR_ENA */
+#define WM8961_SPKR_ENA_SHIFT 7 /* SPKR_ENA */
+#define WM8961_SPKR_ENA_WIDTH 1 /* SPKR_ENA */
+#define WM8961_SPKL_ENA 0x0040 /* SPKL_ENA */
+#define WM8961_SPKL_ENA_MASK 0x0040 /* SPKL_ENA */
+#define WM8961_SPKL_ENA_SHIFT 6 /* SPKL_ENA */
+#define WM8961_SPKL_ENA_WIDTH 1 /* SPKL_ENA */
+
+/*
+ * R51 (0x33) - Class D Control 2
+ */
+#define WM8961_CLASSD_ACGAIN_MASK 0x0007 /* CLASSD_ACGAIN - [2:0] */
+#define WM8961_CLASSD_ACGAIN_SHIFT 0 /* CLASSD_ACGAIN - [2:0] */
+#define WM8961_CLASSD_ACGAIN_WIDTH 3 /* CLASSD_ACGAIN - [2:0] */
+
+/*
+ * R56 (0x38) - Clocking 4
+ */
+#define WM8961_CLK_DCS_DIV_MASK 0x01E0 /* CLK_DCS_DIV - [8:5] */
+#define WM8961_CLK_DCS_DIV_SHIFT 5 /* CLK_DCS_DIV - [8:5] */
+#define WM8961_CLK_DCS_DIV_WIDTH 4 /* CLK_DCS_DIV - [8:5] */
+#define WM8961_CLK_SYS_RATE_MASK 0x001E /* CLK_SYS_RATE - [4:1] */
+#define WM8961_CLK_SYS_RATE_SHIFT 1 /* CLK_SYS_RATE - [4:1] */
+#define WM8961_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [4:1] */
+
+/*
+ * R57 (0x39) - DSP Sidetone 0
+ */
+#define WM8961_ADCR_DAC_SVOL_MASK 0x00F0 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8961_ADCR_DAC_SVOL_SHIFT 4 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8961_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [7:4] */
+#define WM8961_ADC_TO_DACR_MASK 0x000C /* ADC_TO_DACR - [3:2] */
+#define WM8961_ADC_TO_DACR_SHIFT 2 /* ADC_TO_DACR - [3:2] */
+#define WM8961_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [3:2] */
+
+/*
+ * R58 (0x3A) - DSP Sidetone 1
+ */
+#define WM8961_ADCL_DAC_SVOL_MASK 0x00F0 /* ADCL_DAC_SVOL - [7:4] */
+#define WM8961_ADCL_DAC_SVOL_SHIFT 4 /* ADCL_DAC_SVOL - [7:4] */
+#define WM8961_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [7:4] */
+#define WM8961_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */
+#define WM8961_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */
+#define WM8961_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */
+
+/*
+ * R60 (0x3C) - DC Servo 0
+ */
+#define WM8961_DCS_ENA_CHAN_INL 0x0080 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_ENA_CHAN_INL_MASK 0x0080 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_ENA_CHAN_INL_SHIFT 7 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_ENA_CHAN_INL_WIDTH 1 /* DCS_ENA_CHAN_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL 0x0040 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL_MASK 0x0040 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL_SHIFT 6 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_STARTUP_INL_WIDTH 1 /* DCS_TRIG_STARTUP_INL */
+#define WM8961_DCS_TRIG_SERIES_INL 0x0010 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_TRIG_SERIES_INL_MASK 0x0010 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_TRIG_SERIES_INL_SHIFT 4 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_TRIG_SERIES_INL_WIDTH 1 /* DCS_TRIG_SERIES_INL */
+#define WM8961_DCS_ENA_CHAN_INR 0x0008 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_ENA_CHAN_INR_MASK 0x0008 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_ENA_CHAN_INR_SHIFT 3 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_ENA_CHAN_INR_WIDTH 1 /* DCS_ENA_CHAN_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR 0x0004 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR_MASK 0x0004 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR_SHIFT 2 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_STARTUP_INR_WIDTH 1 /* DCS_TRIG_STARTUP_INR */
+#define WM8961_DCS_TRIG_SERIES_INR 0x0001 /* DCS_TRIG_SERIES_INR */
+#define WM8961_DCS_TRIG_SERIES_INR_MASK 0x0001 /* DCS_TRIG_SERIES_INR */
+#define WM8961_DCS_TRIG_SERIES_INR_SHIFT 0 /* DCS_TRIG_SERIES_INR */
+#define WM8961_DCS_TRIG_SERIES_INR_WIDTH 1 /* DCS_TRIG_SERIES_INR */
+
+/*
+ * R61 (0x3D) - DC Servo 1
+ */
+#define WM8961_DCS_ENA_CHAN_HPL 0x0080 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_ENA_CHAN_HPL_MASK 0x0080 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_ENA_CHAN_HPL_SHIFT 7 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_ENA_CHAN_HPL_WIDTH 1 /* DCS_ENA_CHAN_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL 0x0040 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL_MASK 0x0040 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL_SHIFT 6 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_STARTUP_HPL_WIDTH 1 /* DCS_TRIG_STARTUP_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL 0x0010 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL_MASK 0x0010 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL_SHIFT 4 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_TRIG_SERIES_HPL_WIDTH 1 /* DCS_TRIG_SERIES_HPL */
+#define WM8961_DCS_ENA_CHAN_HPR 0x0008 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_ENA_CHAN_HPR_MASK 0x0008 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_ENA_CHAN_HPR_SHIFT 3 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_ENA_CHAN_HPR_WIDTH 1 /* DCS_ENA_CHAN_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR 0x0004 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR_MASK 0x0004 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR_SHIFT 2 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_STARTUP_HPR_WIDTH 1 /* DCS_TRIG_STARTUP_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR 0x0001 /* DCS_TRIG_SERIES_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR_MASK 0x0001 /* DCS_TRIG_SERIES_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR_SHIFT 0 /* DCS_TRIG_SERIES_HPR */
+#define WM8961_DCS_TRIG_SERIES_HPR_WIDTH 1 /* DCS_TRIG_SERIES_HPR */
+
+/*
+ * R63 (0x3F) - DC Servo 3
+ */
+#define WM8961_DCS_FILT_BW_SERIES_MASK 0x0030 /* DCS_FILT_BW_SERIES - [5:4] */
+#define WM8961_DCS_FILT_BW_SERIES_SHIFT 4 /* DCS_FILT_BW_SERIES - [5:4] */
+#define WM8961_DCS_FILT_BW_SERIES_WIDTH 2 /* DCS_FILT_BW_SERIES - [5:4] */
+
+/*
+ * R65 (0x41) - DC Servo 5
+ */
+#define WM8961_DCS_SERIES_NO_HP_MASK 0x007F /* DCS_SERIES_NO_HP - [6:0] */
+#define WM8961_DCS_SERIES_NO_HP_SHIFT 0 /* DCS_SERIES_NO_HP - [6:0] */
+#define WM8961_DCS_SERIES_NO_HP_WIDTH 7 /* DCS_SERIES_NO_HP - [6:0] */
+
+/*
+ * R68 (0x44) - Analogue PGA Bias
+ */
+#define WM8961_HP_PGAS_BIAS_MASK 0x0007 /* HP_PGAS_BIAS - [2:0] */
+#define WM8961_HP_PGAS_BIAS_SHIFT 0 /* HP_PGAS_BIAS - [2:0] */
+#define WM8961_HP_PGAS_BIAS_WIDTH 3 /* HP_PGAS_BIAS - [2:0] */
+
+/*
+ * R69 (0x45) - Analogue HP 0
+ */
+#define WM8961_HPL_RMV_SHORT 0x0080 /* HPL_RMV_SHORT */
+#define WM8961_HPL_RMV_SHORT_MASK 0x0080 /* HPL_RMV_SHORT */
+#define WM8961_HPL_RMV_SHORT_SHIFT 7 /* HPL_RMV_SHORT */
+#define WM8961_HPL_RMV_SHORT_WIDTH 1 /* HPL_RMV_SHORT */
+#define WM8961_HPL_ENA_OUTP 0x0040 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_OUTP_MASK 0x0040 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_OUTP_SHIFT 6 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_OUTP_WIDTH 1 /* HPL_ENA_OUTP */
+#define WM8961_HPL_ENA_DLY 0x0020 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA_DLY_MASK 0x0020 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA_DLY_SHIFT 5 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA_DLY_WIDTH 1 /* HPL_ENA_DLY */
+#define WM8961_HPL_ENA 0x0010 /* HPL_ENA */
+#define WM8961_HPL_ENA_MASK 0x0010 /* HPL_ENA */
+#define WM8961_HPL_ENA_SHIFT 4 /* HPL_ENA */
+#define WM8961_HPL_ENA_WIDTH 1 /* HPL_ENA */
+#define WM8961_HPR_RMV_SHORT 0x0008 /* HPR_RMV_SHORT */
+#define WM8961_HPR_RMV_SHORT_MASK 0x0008 /* HPR_RMV_SHORT */
+#define WM8961_HPR_RMV_SHORT_SHIFT 3 /* HPR_RMV_SHORT */
+#define WM8961_HPR_RMV_SHORT_WIDTH 1 /* HPR_RMV_SHORT */
+#define WM8961_HPR_ENA_OUTP 0x0004 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_OUTP_MASK 0x0004 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_OUTP_SHIFT 2 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_OUTP_WIDTH 1 /* HPR_ENA_OUTP */
+#define WM8961_HPR_ENA_DLY 0x0002 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA_DLY_MASK 0x0002 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA_DLY_SHIFT 1 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA_DLY_WIDTH 1 /* HPR_ENA_DLY */
+#define WM8961_HPR_ENA 0x0001 /* HPR_ENA */
+#define WM8961_HPR_ENA_MASK 0x0001 /* HPR_ENA */
+#define WM8961_HPR_ENA_SHIFT 0 /* HPR_ENA */
+#define WM8961_HPR_ENA_WIDTH 1 /* HPR_ENA */
+
+/*
+ * R71 (0x47) - Analogue HP 2
+ */
+#define WM8961_HPL_VOL_MASK 0x01C0 /* HPL_VOL - [8:6] */
+#define WM8961_HPL_VOL_SHIFT 6 /* HPL_VOL - [8:6] */
+#define WM8961_HPL_VOL_WIDTH 3 /* HPL_VOL - [8:6] */
+#define WM8961_HPR_VOL_MASK 0x0038 /* HPR_VOL - [5:3] */
+#define WM8961_HPR_VOL_SHIFT 3 /* HPR_VOL - [5:3] */
+#define WM8961_HPR_VOL_WIDTH 3 /* HPR_VOL - [5:3] */
+#define WM8961_HP_BIAS_BOOST_MASK 0x0007 /* HP_BIAS_BOOST - [2:0] */
+#define WM8961_HP_BIAS_BOOST_SHIFT 0 /* HP_BIAS_BOOST - [2:0] */
+#define WM8961_HP_BIAS_BOOST_WIDTH 3 /* HP_BIAS_BOOST - [2:0] */
+
+/*
+ * R72 (0x48) - Charge Pump 1
+ */
+#define WM8961_CP_ENA 0x0001 /* CP_ENA */
+#define WM8961_CP_ENA_MASK 0x0001 /* CP_ENA */
+#define WM8961_CP_ENA_SHIFT 0 /* CP_ENA */
+#define WM8961_CP_ENA_WIDTH 1 /* CP_ENA */
+
+/*
+ * R82 (0x52) - Charge Pump B
+ */
+#define WM8961_CP_DYN_PWR_MASK 0x0003 /* CP_DYN_PWR - [1:0] */
+#define WM8961_CP_DYN_PWR_SHIFT 0 /* CP_DYN_PWR - [1:0] */
+#define WM8961_CP_DYN_PWR_WIDTH 2 /* CP_DYN_PWR - [1:0] */
+
+/*
+ * R87 (0x57) - Write Sequencer 1
+ */
+#define WM8961_WSEQ_ENA 0x0020 /* WSEQ_ENA */
+#define WM8961_WSEQ_ENA_MASK 0x0020 /* WSEQ_ENA */
+#define WM8961_WSEQ_ENA_SHIFT 5 /* WSEQ_ENA */
+#define WM8961_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */
+#define WM8961_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8961_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8961_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */
+
+/*
+ * R88 (0x58) - Write Sequencer 2
+ */
+#define WM8961_WSEQ_EOS 0x0100 /* WSEQ_EOS */
+#define WM8961_WSEQ_EOS_MASK 0x0100 /* WSEQ_EOS */
+#define WM8961_WSEQ_EOS_SHIFT 8 /* WSEQ_EOS */
+#define WM8961_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */
+#define WM8961_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */
+#define WM8961_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */
+#define WM8961_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */
+
+/*
+ * R89 (0x59) - Write Sequencer 3
+ */
+#define WM8961_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */
+#define WM8961_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */
+#define WM8961_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */
+
+/*
+ * R90 (0x5A) - Write Sequencer 4
+ */
+#define WM8961_WSEQ_ABORT 0x0100 /* WSEQ_ABORT */
+#define WM8961_WSEQ_ABORT_MASK 0x0100 /* WSEQ_ABORT */
+#define WM8961_WSEQ_ABORT_SHIFT 8 /* WSEQ_ABORT */
+#define WM8961_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */
+#define WM8961_WSEQ_START 0x0080 /* WSEQ_START */
+#define WM8961_WSEQ_START_MASK 0x0080 /* WSEQ_START */
+#define WM8961_WSEQ_START_SHIFT 7 /* WSEQ_START */
+#define WM8961_WSEQ_START_WIDTH 1 /* WSEQ_START */
+#define WM8961_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */
+#define WM8961_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */
+#define WM8961_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */
+
+/*
+ * R91 (0x5B) - Write Sequencer 5
+ */
+#define WM8961_WSEQ_DATA_WIDTH_MASK 0x0070 /* WSEQ_DATA_WIDTH - [6:4] */
+#define WM8961_WSEQ_DATA_WIDTH_SHIFT 4 /* WSEQ_DATA_WIDTH - [6:4] */
+#define WM8961_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [6:4] */
+#define WM8961_WSEQ_DATA_START_MASK 0x000F /* WSEQ_DATA_START - [3:0] */
+#define WM8961_WSEQ_DATA_START_SHIFT 0 /* WSEQ_DATA_START - [3:0] */
+#define WM8961_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [3:0] */
+
+/*
+ * R92 (0x5C) - Write Sequencer 6
+ */
+#define WM8961_WSEQ_DELAY_MASK 0x000F /* WSEQ_DELAY - [3:0] */
+#define WM8961_WSEQ_DELAY_SHIFT 0 /* WSEQ_DELAY - [3:0] */
+#define WM8961_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [3:0] */
+
+/*
+ * R93 (0x5D) - Write Sequencer 7
+ */
+#define WM8961_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */
+#define WM8961_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */
+#define WM8961_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */
+#define WM8961_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */
+
+/*
+ * R252 (0xFC) - General test 1
+ */
+#define WM8961_ARA_ENA 0x0002 /* ARA_ENA */
+#define WM8961_ARA_ENA_MASK 0x0002 /* ARA_ENA */
+#define WM8961_ARA_ENA_SHIFT 1 /* ARA_ENA */
+#define WM8961_ARA_ENA_WIDTH 1 /* ARA_ENA */
+#define WM8961_AUTO_INC 0x0001 /* AUTO_INC */
+#define WM8961_AUTO_INC_MASK 0x0001 /* AUTO_INC */
+#define WM8961_AUTO_INC_SHIFT 0 /* AUTO_INC */
+#define WM8961_AUTO_INC_WIDTH 1 /* AUTO_INC */
+
+#endif
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 032dca2..d66efb0 100644
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -59,44 +59,7 @@
0x0079, 0x0079, 0x0079, /* 40 */
};
-static inline unsigned int wm8971_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg < WM8971_REG_COUNT)
- return cache[reg];
-
- return -1;
-}
-
-static inline void wm8971_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg < WM8971_REG_COUNT)
- cache[reg] = value;
-}
-
-static int wm8971_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8971_write_reg_cache (codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8971_reset(c) wm8971_write(c, WM8971_RESET, 0)
+#define wm8971_reset(c) snd_soc_write(c, WM8971_RESET, 0)
/* WM8971 Controls */
static const char *wm8971_bass[] = { "Linear Control", "Adaptive Boost" };
@@ -521,7 +484,7 @@
return -EINVAL;
}
- wm8971_write(codec, WM8971_IFACE, iface);
+ snd_soc_write(codec, WM8971_IFACE, iface);
return 0;
}
@@ -533,8 +496,8 @@
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8971_priv *wm8971 = codec->private_data;
- u16 iface = wm8971_read_reg_cache(codec, WM8971_IFACE) & 0x1f3;
- u16 srate = wm8971_read_reg_cache(codec, WM8971_SRATE) & 0x1c0;
+ u16 iface = snd_soc_read(codec, WM8971_IFACE) & 0x1f3;
+ u16 srate = snd_soc_read(codec, WM8971_SRATE) & 0x1c0;
int coeff = get_coeff(wm8971->sysclk, params_rate(params));
/* bit size */
@@ -553,9 +516,9 @@
}
/* set iface & srate */
- wm8971_write(codec, WM8971_IFACE, iface);
+ snd_soc_write(codec, WM8971_IFACE, iface);
if (coeff >= 0)
- wm8971_write(codec, WM8971_SRATE, srate |
+ snd_soc_write(codec, WM8971_SRATE, srate |
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
@@ -564,33 +527,33 @@
static int wm8971_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8971_read_reg_cache(codec, WM8971_ADCDAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8971_ADCDAC) & 0xfff7;
if (mute)
- wm8971_write(codec, WM8971_ADCDAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8971_ADCDAC, mute_reg | 0x8);
else
- wm8971_write(codec, WM8971_ADCDAC, mute_reg);
+ snd_soc_write(codec, WM8971_ADCDAC, mute_reg);
return 0;
}
static int wm8971_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
+ u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
+ snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
/* mute dac and set vmid to 500k, enable VREF */
- wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
+ snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
break;
case SND_SOC_BIAS_OFF:
- wm8971_write(codec, WM8971_PWR1, 0x0001);
+ snd_soc_write(codec, WM8971_PWR1, 0x0001);
break;
}
codec->bias_level = level;
@@ -667,8 +630,8 @@
/* charge wm8971 caps */
if (codec->suspend_bias_level == SND_SOC_BIAS_ON) {
- reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
- wm8971_write(codec, WM8971_PWR1, reg | 0x01c0);
+ reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
+ snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->bias_level = SND_SOC_BIAS_ON;
queue_delayed_work(wm8971_workq, &codec->delayed_work,
msecs_to_jiffies(1000));
@@ -677,15 +640,14 @@
return 0;
}
-static int wm8971_init(struct snd_soc_device *socdev)
+static int wm8971_init(struct snd_soc_device *socdev,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = socdev->card->codec;
int reg, ret = 0;
codec->name = "WM8971";
codec->owner = THIS_MODULE;
- codec->read = wm8971_read_reg_cache;
- codec->write = wm8971_write;
codec->set_bias_level = wm8971_set_bias_level;
codec->dai = &wm8971_dai;
codec->reg_cache_size = ARRAY_SIZE(wm8971_reg);
@@ -695,42 +657,48 @@
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8971: failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
wm8971_reset(codec);
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8971: failed to create pcms\n");
- goto pcm_err;
+ goto err;
}
/* charge output caps - set vmid to 5k for quick power up */
- reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
- wm8971_write(codec, WM8971_PWR1, reg | 0x01c0);
+ reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
+ snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
codec->bias_level = SND_SOC_BIAS_STANDBY;
queue_delayed_work(wm8971_workq, &codec->delayed_work,
msecs_to_jiffies(1000));
/* set the update bits */
- reg = wm8971_read_reg_cache(codec, WM8971_LDAC);
- wm8971_write(codec, WM8971_LDAC, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_RDAC);
- wm8971_write(codec, WM8971_RDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_LDAC);
+ snd_soc_write(codec, WM8971_LDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_RDAC);
+ snd_soc_write(codec, WM8971_RDAC, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_LOUT1V);
- wm8971_write(codec, WM8971_LOUT1V, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_ROUT1V);
- wm8971_write(codec, WM8971_ROUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_LOUT1V);
+ snd_soc_write(codec, WM8971_LOUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_ROUT1V);
+ snd_soc_write(codec, WM8971_ROUT1V, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_LOUT2V);
- wm8971_write(codec, WM8971_LOUT2V, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_ROUT2V);
- wm8971_write(codec, WM8971_ROUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_LOUT2V);
+ snd_soc_write(codec, WM8971_LOUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_ROUT2V);
+ snd_soc_write(codec, WM8971_ROUT2V, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_LINVOL);
- wm8971_write(codec, WM8971_LINVOL, reg | 0x0100);
- reg = wm8971_read_reg_cache(codec, WM8971_RINVOL);
- wm8971_write(codec, WM8971_RINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_LINVOL);
+ snd_soc_write(codec, WM8971_LINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8971_RINVOL);
+ snd_soc_write(codec, WM8971_RINVOL, reg | 0x0100);
snd_soc_add_controls(codec, wm8971_snd_controls,
ARRAY_SIZE(wm8971_snd_controls));
@@ -745,7 +713,7 @@
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-pcm_err:
+err:
kfree(codec->reg_cache);
return ret;
}
@@ -767,7 +735,7 @@
codec->control_data = i2c;
- ret = wm8971_init(socdev);
+ ret = wm8971_init(socdev, SND_SOC_I2C);
if (ret < 0)
pr_err("failed to initialise WM8971\n");
@@ -877,7 +845,6 @@
#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8971_add_i2c_device(pdev, setup);
}
#endif
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
new file mode 100644
index 0000000..d8a013a
--- /dev/null
+++ b/sound/soc/codecs/wm8974.c
@@ -0,0 +1,808 @@
+/*
+ * wm8974.c -- WM8974 ALSA Soc Audio driver
+ *
+ * Copyright 2006-2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <linux@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8974.h"
+
+static const u16 wm8974_reg[WM8974_CACHEREGNUM] = {
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0050, 0x0000, 0x0140, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x00ff,
+ 0x0000, 0x0000, 0x0100, 0x00ff,
+ 0x0000, 0x0000, 0x012c, 0x002c,
+ 0x002c, 0x002c, 0x002c, 0x0000,
+ 0x0032, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0038, 0x000b, 0x0032, 0x0000,
+ 0x0008, 0x000c, 0x0093, 0x00e9,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0003, 0x0010, 0x0000, 0x0000,
+ 0x0000, 0x0002, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0039, 0x0000,
+ 0x0000,
+};
+
+#define WM8974_POWER1_BIASEN 0x08
+#define WM8974_POWER1_BUFIOEN 0x10
+
+struct wm8974_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[WM8974_CACHEREGNUM];
+};
+
+static struct snd_soc_codec *wm8974_codec;
+
+#define wm8974_reset(c) snd_soc_write(c, WM8974_RESET, 0)
+
+static const char *wm8974_companding[] = {"Off", "NC", "u-law", "A-law" };
+static const char *wm8974_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz" };
+static const char *wm8974_eqmode[] = {"Capture", "Playback" };
+static const char *wm8974_bw[] = {"Narrow", "Wide" };
+static const char *wm8974_eq1[] = {"80Hz", "105Hz", "135Hz", "175Hz" };
+static const char *wm8974_eq2[] = {"230Hz", "300Hz", "385Hz", "500Hz" };
+static const char *wm8974_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz" };
+static const char *wm8974_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz" };
+static const char *wm8974_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz" };
+static const char *wm8974_alc[] = {"ALC", "Limiter" };
+
+static const struct soc_enum wm8974_enum[] = {
+ SOC_ENUM_SINGLE(WM8974_COMP, 1, 4, wm8974_companding), /* adc */
+ SOC_ENUM_SINGLE(WM8974_COMP, 3, 4, wm8974_companding), /* dac */
+ SOC_ENUM_SINGLE(WM8974_DAC, 4, 4, wm8974_deemp),
+ SOC_ENUM_SINGLE(WM8974_EQ1, 8, 2, wm8974_eqmode),
+
+ SOC_ENUM_SINGLE(WM8974_EQ1, 5, 4, wm8974_eq1),
+ SOC_ENUM_SINGLE(WM8974_EQ2, 8, 2, wm8974_bw),
+ SOC_ENUM_SINGLE(WM8974_EQ2, 5, 4, wm8974_eq2),
+ SOC_ENUM_SINGLE(WM8974_EQ3, 8, 2, wm8974_bw),
+
+ SOC_ENUM_SINGLE(WM8974_EQ3, 5, 4, wm8974_eq3),
+ SOC_ENUM_SINGLE(WM8974_EQ4, 8, 2, wm8974_bw),
+ SOC_ENUM_SINGLE(WM8974_EQ4, 5, 4, wm8974_eq4),
+ SOC_ENUM_SINGLE(WM8974_EQ5, 8, 2, wm8974_bw),
+
+ SOC_ENUM_SINGLE(WM8974_EQ5, 5, 4, wm8974_eq5),
+ SOC_ENUM_SINGLE(WM8974_ALC3, 8, 2, wm8974_alc),
+};
+
+static const char *wm8974_auxmode_text[] = { "Buffer", "Mixer" };
+
+static const struct soc_enum wm8974_auxmode =
+ SOC_ENUM_SINGLE(WM8974_INPUT, 3, 2, wm8974_auxmode_text);
+
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
+static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0);
+
+static const struct snd_kcontrol_new wm8974_snd_controls[] = {
+
+SOC_SINGLE("Digital Loopback Switch", WM8974_COMP, 0, 1, 0),
+
+SOC_ENUM("DAC Companding", wm8974_enum[1]),
+SOC_ENUM("ADC Companding", wm8974_enum[0]),
+
+SOC_ENUM("Playback De-emphasis", wm8974_enum[2]),
+SOC_SINGLE("DAC Inversion Switch", WM8974_DAC, 0, 1, 0),
+
+SOC_SINGLE_TLV("PCM Volume", WM8974_DACVOL, 0, 255, 0, digital_tlv),
+
+SOC_SINGLE("High Pass Filter Switch", WM8974_ADC, 8, 1, 0),
+SOC_SINGLE("High Pass Cut Off", WM8974_ADC, 4, 7, 0),
+SOC_SINGLE("ADC Inversion Switch", WM8974_ADC, 0, 1, 0),
+
+SOC_SINGLE_TLV("Capture Volume", WM8974_ADCVOL, 0, 255, 0, digital_tlv),
+
+SOC_ENUM("Equaliser Function", wm8974_enum[3]),
+SOC_ENUM("EQ1 Cut Off", wm8974_enum[4]),
+SOC_SINGLE_TLV("EQ1 Volume", WM8974_EQ1, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ2 Bandwith", wm8974_enum[5]),
+SOC_ENUM("EQ2 Cut Off", wm8974_enum[6]),
+SOC_SINGLE_TLV("EQ2 Volume", WM8974_EQ2, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ3 Bandwith", wm8974_enum[7]),
+SOC_ENUM("EQ3 Cut Off", wm8974_enum[8]),
+SOC_SINGLE_TLV("EQ3 Volume", WM8974_EQ3, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ4 Bandwith", wm8974_enum[9]),
+SOC_ENUM("EQ4 Cut Off", wm8974_enum[10]),
+SOC_SINGLE_TLV("EQ4 Volume", WM8974_EQ4, 0, 24, 1, eq_tlv),
+
+SOC_ENUM("Equaliser EQ5 Bandwith", wm8974_enum[11]),
+SOC_ENUM("EQ5 Cut Off", wm8974_enum[12]),
+SOC_SINGLE_TLV("EQ5 Volume", WM8974_EQ5, 0, 24, 1, eq_tlv),
+
+SOC_SINGLE("DAC Playback Limiter Switch", WM8974_DACLIM1, 8, 1, 0),
+SOC_SINGLE("DAC Playback Limiter Decay", WM8974_DACLIM1, 4, 15, 0),
+SOC_SINGLE("DAC Playback Limiter Attack", WM8974_DACLIM1, 0, 15, 0),
+
+SOC_SINGLE("DAC Playback Limiter Threshold", WM8974_DACLIM2, 4, 7, 0),
+SOC_SINGLE("DAC Playback Limiter Boost", WM8974_DACLIM2, 0, 15, 0),
+
+SOC_SINGLE("ALC Enable Switch", WM8974_ALC1, 8, 1, 0),
+SOC_SINGLE("ALC Capture Max Gain", WM8974_ALC1, 3, 7, 0),
+SOC_SINGLE("ALC Capture Min Gain", WM8974_ALC1, 0, 7, 0),
+
+SOC_SINGLE("ALC Capture ZC Switch", WM8974_ALC2, 8, 1, 0),
+SOC_SINGLE("ALC Capture Hold", WM8974_ALC2, 4, 7, 0),
+SOC_SINGLE("ALC Capture Target", WM8974_ALC2, 0, 15, 0),
+
+SOC_ENUM("ALC Capture Mode", wm8974_enum[13]),
+SOC_SINGLE("ALC Capture Decay", WM8974_ALC3, 4, 15, 0),
+SOC_SINGLE("ALC Capture Attack", WM8974_ALC3, 0, 15, 0),
+
+SOC_SINGLE("ALC Capture Noise Gate Switch", WM8974_NGATE, 3, 1, 0),
+SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8974_NGATE, 0, 7, 0),
+
+SOC_SINGLE("Capture PGA ZC Switch", WM8974_INPPGA, 7, 1, 0),
+SOC_SINGLE_TLV("Capture PGA Volume", WM8974_INPPGA, 0, 63, 0, inpga_tlv),
+
+SOC_SINGLE("Speaker Playback ZC Switch", WM8974_SPKVOL, 7, 1, 0),
+SOC_SINGLE("Speaker Playback Switch", WM8974_SPKVOL, 6, 1, 1),
+SOC_SINGLE_TLV("Speaker Playback Volume", WM8974_SPKVOL, 0, 63, 0, spk_tlv),
+
+SOC_ENUM("Aux Mode", wm8974_auxmode),
+
+SOC_SINGLE("Capture Boost(+20dB)", WM8974_ADCBOOST, 8, 1, 0),
+SOC_SINGLE("Mono Playback Switch", WM8974_MONOMIX, 6, 1, 1),
+};
+
+/* Speaker Output Mixer */
+static const struct snd_kcontrol_new wm8974_speaker_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Bypass Switch", WM8974_SPKMIX, 1, 1, 0),
+SOC_DAPM_SINGLE("Aux Playback Switch", WM8974_SPKMIX, 5, 1, 0),
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_SPKMIX, 0, 1, 1),
+};
+
+/* Mono Output Mixer */
+static const struct snd_kcontrol_new wm8974_mono_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Bypass Switch", WM8974_MONOMIX, 1, 1, 0),
+SOC_DAPM_SINGLE("Aux Playback Switch", WM8974_MONOMIX, 2, 1, 0),
+SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_MONOMIX, 0, 1, 0),
+};
+
+/* Boost mixer */
+static const struct snd_kcontrol_new wm8974_boost_mixer[] = {
+SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 0),
+};
+
+/* Input PGA */
+static const struct snd_kcontrol_new wm8974_inpga[] = {
+SOC_DAPM_SINGLE("Aux Switch", WM8974_INPUT, 2, 1, 0),
+SOC_DAPM_SINGLE("MicN Switch", WM8974_INPUT, 1, 1, 0),
+SOC_DAPM_SINGLE("MicP Switch", WM8974_INPUT, 0, 1, 0),
+};
+
+/* AUX Input boost vol */
+static const struct snd_kcontrol_new wm8974_aux_boost_controls =
+SOC_DAPM_SINGLE("Aux Volume", WM8974_ADCBOOST, 0, 7, 0);
+
+/* Mic Input boost vol */
+static const struct snd_kcontrol_new wm8974_mic_boost_controls =
+SOC_DAPM_SINGLE("Mic Volume", WM8974_ADCBOOST, 4, 7, 0);
+
+static const struct snd_soc_dapm_widget wm8974_dapm_widgets[] = {
+SND_SOC_DAPM_MIXER("Speaker Mixer", WM8974_POWER3, 2, 0,
+ &wm8974_speaker_mixer_controls[0],
+ ARRAY_SIZE(wm8974_speaker_mixer_controls)),
+SND_SOC_DAPM_MIXER("Mono Mixer", WM8974_POWER3, 3, 0,
+ &wm8974_mono_mixer_controls[0],
+ ARRAY_SIZE(wm8974_mono_mixer_controls)),
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8974_POWER3, 0, 0),
+SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8974_POWER2, 0, 0),
+SND_SOC_DAPM_PGA("Aux Input", WM8974_POWER1, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SpkN Out", WM8974_POWER3, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("SpkP Out", WM8974_POWER3, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Mono Out", WM8974_POWER3, 7, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("Input PGA", WM8974_POWER2, 2, 0, wm8974_inpga,
+ ARRAY_SIZE(wm8974_inpga)),
+SND_SOC_DAPM_MIXER("Boost Mixer", WM8974_POWER2, 4, 0,
+ wm8974_boost_mixer, ARRAY_SIZE(wm8974_boost_mixer)),
+
+SND_SOC_DAPM_MICBIAS("Mic Bias", WM8974_POWER1, 4, 0),
+
+SND_SOC_DAPM_INPUT("MICN"),
+SND_SOC_DAPM_INPUT("MICP"),
+SND_SOC_DAPM_INPUT("AUX"),
+SND_SOC_DAPM_OUTPUT("MONOOUT"),
+SND_SOC_DAPM_OUTPUT("SPKOUTP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTN"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* Mono output mixer */
+ {"Mono Mixer", "PCM Playback Switch", "DAC"},
+ {"Mono Mixer", "Aux Playback Switch", "Aux Input"},
+ {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+ /* Speaker output mixer */
+ {"Speaker Mixer", "PCM Playback Switch", "DAC"},
+ {"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
+ {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
+
+ /* Outputs */
+ {"Mono Out", NULL, "Mono Mixer"},
+ {"MONOOUT", NULL, "Mono Out"},
+ {"SpkN Out", NULL, "Speaker Mixer"},
+ {"SpkP Out", NULL, "Speaker Mixer"},
+ {"SPKOUTN", NULL, "SpkN Out"},
+ {"SPKOUTP", NULL, "SpkP Out"},
+
+ /* Boost Mixer */
+ {"ADC", NULL, "Boost Mixer"},
+ {"Boost Mixer", "Aux Switch", "Aux Input"},
+ {"Boost Mixer", NULL, "Input PGA"},
+ {"Boost Mixer", NULL, "MICP"},
+
+ /* Input PGA */
+ {"Input PGA", "Aux Switch", "Aux Input"},
+ {"Input PGA", "MicN Switch", "MICN"},
+ {"Input PGA", "MicP Switch", "MICP"},
+
+ /* Inputs */
+ {"Aux Input", NULL, "AUX"},
+};
+
+static int wm8974_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8974_dapm_widgets,
+ ARRAY_SIZE(wm8974_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+struct pll_ {
+ unsigned int pre_div:4; /* prescale - 1 */
+ unsigned int n:4;
+ unsigned int k;
+};
+
+static struct pll_ pll_div;
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 24) * 10)
+
+static void pll_factors(unsigned int target, unsigned int source)
+{
+ unsigned long long Kpart;
+ unsigned int K, Ndiv, Nmod;
+
+ Ndiv = target / source;
+ if (Ndiv < 6) {
+ source >>= 1;
+ pll_div.pre_div = 1;
+ Ndiv = target / source;
+ } else
+ pll_div.pre_div = 0;
+
+ if ((Ndiv < 6) || (Ndiv > 12))
+ printk(KERN_WARNING
+ "WM8974 N value %u outwith recommended range!\n",
+ Ndiv);
+
+ pll_div.n = Ndiv;
+ Nmod = target % source;
+ Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, source);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ /* Check if we need to round */
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ K /= 10;
+
+ pll_div.k = K;
+}
+
+static int wm8974_set_dai_pll(struct snd_soc_dai *codec_dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 reg;
+
+ if (freq_in == 0 || freq_out == 0) {
+ /* Clock CODEC directly from MCLK */
+ reg = snd_soc_read(codec, WM8974_CLOCK);
+ snd_soc_write(codec, WM8974_CLOCK, reg & 0x0ff);
+
+ /* Turn off PLL */
+ reg = snd_soc_read(codec, WM8974_POWER1);
+ snd_soc_write(codec, WM8974_POWER1, reg & 0x1df);
+ return 0;
+ }
+
+ pll_factors(freq_out*4, freq_in);
+
+ snd_soc_write(codec, WM8974_PLLN, (pll_div.pre_div << 4) | pll_div.n);
+ snd_soc_write(codec, WM8974_PLLK1, pll_div.k >> 18);
+ snd_soc_write(codec, WM8974_PLLK2, (pll_div.k >> 9) & 0x1ff);
+ snd_soc_write(codec, WM8974_PLLK3, pll_div.k & 0x1ff);
+ reg = snd_soc_read(codec, WM8974_POWER1);
+ snd_soc_write(codec, WM8974_POWER1, reg | 0x020);
+
+ /* Run CODEC from PLL instead of MCLK */
+ reg = snd_soc_read(codec, WM8974_CLOCK);
+ snd_soc_write(codec, WM8974_CLOCK, reg | 0x100);
+
+ return 0;
+}
+
+/*
+ * Configure WM8974 clock dividers.
+ */
+static int wm8974_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+ int div_id, int div)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 reg;
+
+ switch (div_id) {
+ case WM8974_OPCLKDIV:
+ reg = snd_soc_read(codec, WM8974_GPIO) & 0x1cf;
+ snd_soc_write(codec, WM8974_GPIO, reg | div);
+ break;
+ case WM8974_MCLKDIV:
+ reg = snd_soc_read(codec, WM8974_CLOCK) & 0x11f;
+ snd_soc_write(codec, WM8974_CLOCK, reg | div);
+ break;
+ case WM8974_ADCCLK:
+ reg = snd_soc_read(codec, WM8974_ADC) & 0x1f7;
+ snd_soc_write(codec, WM8974_ADC, reg | div);
+ break;
+ case WM8974_DACCLK:
+ reg = snd_soc_read(codec, WM8974_DAC) & 0x1f7;
+ snd_soc_write(codec, WM8974_DAC, reg | div);
+ break;
+ case WM8974_BCLKDIV:
+ reg = snd_soc_read(codec, WM8974_CLOCK) & 0x1e3;
+ snd_soc_write(codec, WM8974_CLOCK, reg | div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8974_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 iface = 0;
+ u16 clk = snd_soc_read(codec, WM8974_CLOCK) & 0x1fe;
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ clk |= 0x0001;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 0x0010;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= 0x0008;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= 0x00018;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= 0x0180;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= 0x0100;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= 0x0080;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, WM8974_IFACE, iface);
+ snd_soc_write(codec, WM8974_CLOCK, clk);
+ return 0;
+}
+
+static int wm8974_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 iface = snd_soc_read(codec, WM8974_IFACE) & 0x19f;
+ u16 adn = snd_soc_read(codec, WM8974_ADD) & 0x1f1;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface |= 0x0020;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface |= 0x0040;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ iface |= 0x0060;
+ break;
+ }
+
+ /* filter coefficient */
+ switch (params_rate(params)) {
+ case SNDRV_PCM_RATE_8000:
+ adn |= 0x5 << 1;
+ break;
+ case SNDRV_PCM_RATE_11025:
+ adn |= 0x4 << 1;
+ break;
+ case SNDRV_PCM_RATE_16000:
+ adn |= 0x3 << 1;
+ break;
+ case SNDRV_PCM_RATE_22050:
+ adn |= 0x2 << 1;
+ break;
+ case SNDRV_PCM_RATE_32000:
+ adn |= 0x1 << 1;
+ break;
+ case SNDRV_PCM_RATE_44100:
+ case SNDRV_PCM_RATE_48000:
+ break;
+ }
+
+ snd_soc_write(codec, WM8974_IFACE, iface);
+ snd_soc_write(codec, WM8974_ADD, adn);
+ return 0;
+}
+
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+ if (mute)
+ snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
+ else
+ snd_soc_write(codec, WM8974_DAC, mute_reg);
+ return 0;
+}
+
+/* liam need to make this lower power with dapm */
+static int wm8974_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u16 power1 = snd_soc_read(codec, WM8974_POWER1) & ~0x3;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ power1 |= 0x1; /* VMID 50k */
+ snd_soc_write(codec, WM8974_POWER1, power1);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ power1 |= WM8974_POWER1_BIASEN | WM8974_POWER1_BUFIOEN;
+
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Initial cap charge at VMID 5k */
+ snd_soc_write(codec, WM8974_POWER1, power1 | 0x3);
+ mdelay(100);
+ }
+
+ power1 |= 0x2; /* VMID 500k */
+ snd_soc_write(codec, WM8974_POWER1, power1);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ snd_soc_write(codec, WM8974_POWER1, 0);
+ snd_soc_write(codec, WM8974_POWER2, 0);
+ snd_soc_write(codec, WM8974_POWER3, 0);
+ break;
+ }
+
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8974_RATES (SNDRV_PCM_RATE_8000_48000)
+
+#define WM8974_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8974_ops = {
+ .hw_params = wm8974_pcm_hw_params,
+ .digital_mute = wm8974_mute,
+ .set_fmt = wm8974_set_dai_fmt,
+ .set_clkdiv = wm8974_set_dai_clkdiv,
+ .set_pll = wm8974_set_dai_pll,
+};
+
+struct snd_soc_dai wm8974_dai = {
+ .name = "WM8974 HiFi",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2, /* Only 1 channel of data */
+ .rates = WM8974_RATES,
+ .formats = WM8974_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2, /* Only 1 channel of data */
+ .rates = WM8974_RATES,
+ .formats = WM8974_FORMATS,},
+ .ops = &wm8974_ops,
+ .symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8974_dai);
+
+static int wm8974_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+
+ wm8974_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int wm8974_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->card->codec;
+ int i;
+ u8 data[2];
+ u16 *cache = codec->reg_cache;
+
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(wm8974_reg); i++) {
+ data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+ data[1] = cache[i] & 0x00ff;
+ codec->hw_write(codec->control_data, data, 2);
+ }
+ wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ wm8974_set_bias_level(codec, codec->suspend_bias_level);
+ return 0;
+}
+
+static int wm8974_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ if (wm8974_codec == NULL) {
+ dev_err(&pdev->dev, "Codec device not registered\n");
+ return -ENODEV;
+ }
+
+ socdev->card->codec = wm8974_codec;
+ codec = wm8974_codec;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+ goto pcm_err;
+ }
+
+ snd_soc_add_controls(codec, wm8974_snd_controls,
+ ARRAY_SIZE(wm8974_snd_controls));
+ wm8974_add_widgets(codec);
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card: %d\n", ret);
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ return ret;
+}
+
+/* power down chip */
+static int wm8974_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8974 = {
+ .probe = wm8974_probe,
+ .remove = wm8974_remove,
+ .suspend = wm8974_suspend,
+ .resume = wm8974_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8974);
+
+static __devinit int wm8974_register(struct wm8974_priv *wm8974)
+{
+ int ret;
+ struct snd_soc_codec *codec = &wm8974->codec;
+
+ if (wm8974_codec) {
+ dev_err(codec->dev, "Another WM8974 is registered\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->private_data = wm8974;
+ codec->name = "WM8974";
+ codec->owner = THIS_MODULE;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8974_set_bias_level;
+ codec->dai = &wm8974_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8974_CACHEREGNUM;
+ codec->reg_cache = &wm8974->reg_cache;
+
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_I2C);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
+ memcpy(codec->reg_cache, wm8974_reg, sizeof(wm8974_reg));
+
+ ret = wm8974_reset(codec);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to issue reset\n");
+ goto err;
+ }
+
+ wm8974_dai.dev = codec->dev;
+
+ wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8974_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&wm8974_dai);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
+ }
+
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ kfree(wm8974);
+ return ret;
+}
+
+static __devexit void wm8974_unregister(struct wm8974_priv *wm8974)
+{
+ wm8974_set_bias_level(&wm8974->codec, SND_SOC_BIAS_OFF);
+ snd_soc_unregister_dai(&wm8974_dai);
+ snd_soc_unregister_codec(&wm8974->codec);
+ kfree(wm8974);
+ wm8974_codec = NULL;
+}
+
+static __devinit int wm8974_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8974_priv *wm8974;
+ struct snd_soc_codec *codec;
+
+ wm8974 = kzalloc(sizeof(struct wm8974_priv), GFP_KERNEL);
+ if (wm8974 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8974->codec;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+
+ i2c_set_clientdata(i2c, wm8974);
+ codec->control_data = i2c;
+
+ codec->dev = &i2c->dev;
+
+ return wm8974_register(wm8974);
+}
+
+static __devexit int wm8974_i2c_remove(struct i2c_client *client)
+{
+ struct wm8974_priv *wm8974 = i2c_get_clientdata(client);
+ wm8974_unregister(wm8974);
+ return 0;
+}
+
+static const struct i2c_device_id wm8974_i2c_id[] = {
+ { "wm8974", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8974_i2c_id);
+
+static struct i2c_driver wm8974_i2c_driver = {
+ .driver = {
+ .name = "WM8974",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8974_i2c_probe,
+ .remove = __devexit_p(wm8974_i2c_remove),
+ .id_table = wm8974_i2c_id,
+};
+
+static int __init wm8974_modinit(void)
+{
+ return i2c_add_driver(&wm8974_i2c_driver);
+}
+module_init(wm8974_modinit);
+
+static void __exit wm8974_exit(void)
+{
+ i2c_del_driver(&wm8974_i2c_driver);
+}
+module_exit(wm8974_exit);
+
+MODULE_DESCRIPTION("ASoC WM8974 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8974.h b/sound/soc/codecs/wm8974.h
new file mode 100644
index 0000000..98de956
--- /dev/null
+++ b/sound/soc/codecs/wm8974.h
@@ -0,0 +1,99 @@
+/*
+ * wm8974.h -- WM8974 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8974_H
+#define _WM8974_H
+
+/* WM8974 register space */
+
+#define WM8974_RESET 0x0
+#define WM8974_POWER1 0x1
+#define WM8974_POWER2 0x2
+#define WM8974_POWER3 0x3
+#define WM8974_IFACE 0x4
+#define WM8974_COMP 0x5
+#define WM8974_CLOCK 0x6
+#define WM8974_ADD 0x7
+#define WM8974_GPIO 0x8
+#define WM8974_DAC 0xa
+#define WM8974_DACVOL 0xb
+#define WM8974_ADC 0xe
+#define WM8974_ADCVOL 0xf
+#define WM8974_EQ1 0x12
+#define WM8974_EQ2 0x13
+#define WM8974_EQ3 0x14
+#define WM8974_EQ4 0x15
+#define WM8974_EQ5 0x16
+#define WM8974_DACLIM1 0x18
+#define WM8974_DACLIM2 0x19
+#define WM8974_NOTCH1 0x1b
+#define WM8974_NOTCH2 0x1c
+#define WM8974_NOTCH3 0x1d
+#define WM8974_NOTCH4 0x1e
+#define WM8974_ALC1 0x20
+#define WM8974_ALC2 0x21
+#define WM8974_ALC3 0x22
+#define WM8974_NGATE 0x23
+#define WM8974_PLLN 0x24
+#define WM8974_PLLK1 0x25
+#define WM8974_PLLK2 0x26
+#define WM8974_PLLK3 0x27
+#define WM8974_ATTEN 0x28
+#define WM8974_INPUT 0x2c
+#define WM8974_INPPGA 0x2d
+#define WM8974_ADCBOOST 0x2f
+#define WM8974_OUTPUT 0x31
+#define WM8974_SPKMIX 0x32
+#define WM8974_SPKVOL 0x36
+#define WM8974_MONOMIX 0x38
+
+#define WM8974_CACHEREGNUM 57
+
+/* Clock divider Id's */
+#define WM8974_OPCLKDIV 0
+#define WM8974_MCLKDIV 1
+#define WM8974_ADCCLK 2
+#define WM8974_DACCLK 3
+#define WM8974_BCLKDIV 4
+
+/* DAC clock dividers */
+#define WM8974_DACCLK_F2 (1 << 3)
+#define WM8974_DACCLK_F4 (0 << 3)
+
+/* ADC clock dividers */
+#define WM8974_ADCCLK_F2 (1 << 3)
+#define WM8974_ADCCLK_F4 (0 << 3)
+
+/* PLL Out dividers */
+#define WM8974_OPCLKDIV_1 (0 << 4)
+#define WM8974_OPCLKDIV_2 (1 << 4)
+#define WM8974_OPCLKDIV_3 (2 << 4)
+#define WM8974_OPCLKDIV_4 (3 << 4)
+
+/* BCLK clock dividers */
+#define WM8974_BCLKDIV_1 (0 << 2)
+#define WM8974_BCLKDIV_2 (1 << 2)
+#define WM8974_BCLKDIV_4 (2 << 2)
+#define WM8974_BCLKDIV_8 (3 << 2)
+#define WM8974_BCLKDIV_16 (4 << 2)
+#define WM8974_BCLKDIV_32 (5 << 2)
+
+/* MCLK clock dividers */
+#define WM8974_MCLKDIV_1 (0 << 5)
+#define WM8974_MCLKDIV_1_5 (1 << 5)
+#define WM8974_MCLKDIV_2 (2 << 5)
+#define WM8974_MCLKDIV_3 (3 << 5)
+#define WM8974_MCLKDIV_4 (4 << 5)
+#define WM8974_MCLKDIV_6 (5 << 5)
+#define WM8974_MCLKDIV_8 (6 << 5)
+#define WM8974_MCLKDIV_12 (7 << 5)
+
+extern struct snd_soc_dai wm8974_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8974;
+
+#endif
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 8c0fdf8..3f530f8 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -57,50 +57,7 @@
};
-/*
- * read wm8988 register cache
- */
-static inline unsigned int wm8988_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8988_NUM_REG)
- return -1;
- return cache[reg];
-}
-
-/*
- * write wm8988 register cache
- */
-static inline void wm8988_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg > WM8988_NUM_REG)
- return;
- cache[reg] = value;
-}
-
-static int wm8988_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8988_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8988_reset(c) wm8988_write(c, WM8988_RESET, 0)
+#define wm8988_reset(c) snd_soc_write(c, WM8988_RESET, 0)
/*
* WM8988 Controls
@@ -226,15 +183,15 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- u16 adctl2 = wm8988_read_reg_cache(codec, WM8988_ADCTL2);
+ u16 adctl2 = snd_soc_read(codec, WM8988_ADCTL2);
/* Use the DAC to gate LRC if active, otherwise use ADC */
- if (wm8988_read_reg_cache(codec, WM8988_PWR2) & 0x180)
+ if (snd_soc_read(codec, WM8988_PWR2) & 0x180)
adctl2 &= ~0x4;
else
adctl2 |= 0x4;
- return wm8988_write(codec, WM8988_ADCTL2, adctl2);
+ return snd_soc_write(codec, WM8988_ADCTL2, adctl2);
}
static const char *wm8988_line_texts[] = {
@@ -619,7 +576,7 @@
return -EINVAL;
}
- wm8988_write(codec, WM8988_IFACE, iface);
+ snd_soc_write(codec, WM8988_IFACE, iface);
return 0;
}
@@ -653,8 +610,8 @@
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
struct wm8988_priv *wm8988 = codec->private_data;
- u16 iface = wm8988_read_reg_cache(codec, WM8988_IFACE) & 0x1f3;
- u16 srate = wm8988_read_reg_cache(codec, WM8988_SRATE) & 0x180;
+ u16 iface = snd_soc_read(codec, WM8988_IFACE) & 0x1f3;
+ u16 srate = snd_soc_read(codec, WM8988_SRATE) & 0x180;
int coeff;
coeff = get_coeff(wm8988->sysclk, params_rate(params));
@@ -685,9 +642,9 @@
}
/* set iface & srate */
- wm8988_write(codec, WM8988_IFACE, iface);
+ snd_soc_write(codec, WM8988_IFACE, iface);
if (coeff >= 0)
- wm8988_write(codec, WM8988_SRATE, srate |
+ snd_soc_write(codec, WM8988_SRATE, srate |
(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
return 0;
@@ -696,19 +653,19 @@
static int wm8988_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8988_read_reg_cache(codec, WM8988_ADCDAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8988_ADCDAC) & 0xfff7;
if (mute)
- wm8988_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8988_ADCDAC, mute_reg | 0x8);
else
- wm8988_write(codec, WM8988_ADCDAC, mute_reg);
+ snd_soc_write(codec, WM8988_ADCDAC, mute_reg);
return 0;
}
static int wm8988_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8988_read_reg_cache(codec, WM8988_PWR1) & ~0x1c1;
+ u16 pwr_reg = snd_soc_read(codec, WM8988_PWR1) & ~0x1c1;
switch (level) {
case SND_SOC_BIAS_ON:
@@ -716,24 +673,24 @@
case SND_SOC_BIAS_PREPARE:
/* VREF, VMID=2x50k, digital enabled */
- wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
+ snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x00c0);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* VREF, VMID=2x5k */
- wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
+ snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x1c1);
/* Charge caps */
msleep(100);
}
/* VREF, VMID=2*500k, digital stopped */
- wm8988_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
+ snd_soc_write(codec, WM8988_PWR1, pwr_reg | 0x0141);
break;
case SND_SOC_BIAS_OFF:
- wm8988_write(codec, WM8988_PWR1, 0x0000);
+ snd_soc_write(codec, WM8988_PWR1, 0x0000);
break;
}
codec->bias_level = level;
@@ -868,7 +825,8 @@
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8988);
-static int wm8988_register(struct wm8988_priv *wm8988)
+static int wm8988_register(struct wm8988_priv *wm8988,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = &wm8988->codec;
int ret;
@@ -887,8 +845,6 @@
codec->private_data = wm8988;
codec->name = "WM8988";
codec->owner = THIS_MODULE;
- codec->read = wm8988_read_reg_cache;
- codec->write = wm8988_write;
codec->dai = &wm8988_dai;
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(wm8988->reg_cache);
@@ -899,23 +855,29 @@
memcpy(codec->reg_cache, wm8988_reg,
sizeof(wm8988_reg));
+ ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
ret = wm8988_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
- return ret;
+ goto err;
}
/* set the update bits (we always update left then right) */
- reg = wm8988_read_reg_cache(codec, WM8988_RADC);
- wm8988_write(codec, WM8988_RADC, reg | 0x100);
- reg = wm8988_read_reg_cache(codec, WM8988_RDAC);
- wm8988_write(codec, WM8988_RDAC, reg | 0x0100);
- reg = wm8988_read_reg_cache(codec, WM8988_ROUT1V);
- wm8988_write(codec, WM8988_ROUT1V, reg | 0x0100);
- reg = wm8988_read_reg_cache(codec, WM8988_ROUT2V);
- wm8988_write(codec, WM8988_ROUT2V, reg | 0x0100);
- reg = wm8988_read_reg_cache(codec, WM8988_RINVOL);
- wm8988_write(codec, WM8988_RINVOL, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_RADC);
+ snd_soc_write(codec, WM8988_RADC, reg | 0x100);
+ reg = snd_soc_read(codec, WM8988_RDAC);
+ snd_soc_write(codec, WM8988_RDAC, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_ROUT1V);
+ snd_soc_write(codec, WM8988_ROUT1V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_ROUT2V);
+ snd_soc_write(codec, WM8988_ROUT2V, reg | 0x0100);
+ reg = snd_soc_read(codec, WM8988_RINVOL);
+ snd_soc_write(codec, WM8988_RINVOL, reg | 0x0100);
wm8988_set_bias_level(&wm8988->codec, SND_SOC_BIAS_STANDBY);
@@ -926,18 +888,20 @@
ret = snd_soc_register_codec(codec);
if (ret != 0) {
dev_err(codec->dev, "Failed to register codec: %d\n", ret);
- return ret;
+ goto err;
}
ret = snd_soc_register_dai(&wm8988_dai);
if (ret != 0) {
dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
snd_soc_unregister_codec(codec);
- return ret;
+ goto err_codec;
}
return 0;
+err_codec:
+ snd_soc_unregister_codec(codec);
err:
kfree(wm8988);
return ret;
@@ -964,14 +928,13 @@
return -ENOMEM;
codec = &wm8988->codec;
- codec->hw_write = (hw_write_t)i2c_master_send;
i2c_set_clientdata(i2c, wm8988);
codec->control_data = i2c;
codec->dev = &i2c->dev;
- return wm8988_register(wm8988);
+ return wm8988_register(wm8988, SND_SOC_I2C);
}
static int wm8988_i2c_remove(struct i2c_client *client)
@@ -981,6 +944,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8988_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm8988_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm8988_i2c_suspend NULL
+#define wm8988_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm8988_i2c_id[] = {
{ "wm8988", 0 },
{ }
@@ -994,35 +972,13 @@
},
.probe = wm8988_i2c_probe,
.remove = wm8988_i2c_remove,
+ .suspend = wm8988_i2c_suspend,
+ .resume = wm8988_i2c_resume,
.id_table = wm8988_i2c_id,
};
#endif
#if defined(CONFIG_SPI_MASTER)
-static int wm8988_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
-
static int __devinit wm8988_spi_probe(struct spi_device *spi)
{
struct wm8988_priv *wm8988;
@@ -1033,13 +989,12 @@
return -ENOMEM;
codec = &wm8988->codec;
- codec->hw_write = (hw_write_t)wm8988_spi_write;
codec->control_data = spi;
codec->dev = &spi->dev;
dev_set_drvdata(&spi->dev, wm8988);
- return wm8988_register(wm8988);
+ return wm8988_register(wm8988, SND_SOC_SPI);
}
static int __devexit wm8988_spi_remove(struct spi_device *spi)
@@ -1051,6 +1006,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm8988_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&spi->dev);
+}
+
+static int wm8988_spi_resume(struct spi_device *spi)
+{
+ return snd_soc_resume_device(&spi->dev);
+}
+#else
+#define wm8988_spi_suspend NULL
+#define wm8988_spi_resume NULL
+#endif
+
static struct spi_driver wm8988_spi_driver = {
.driver = {
.name = "wm8988",
@@ -1059,6 +1029,8 @@
},
.probe = wm8988_spi_probe,
.remove = __devexit_p(wm8988_spi_remove),
+ .suspend = wm8988_spi_suspend,
+ .resume = wm8988_spi_resume,
};
#endif
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index d029818..2d702db 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -108,53 +108,7 @@
0x0000, /* R63 - Driver internal */
};
-/*
- * read wm8990 register cache
- */
-static inline unsigned int wm8990_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg >= ARRAY_SIZE(wm8990_reg));
- return cache[reg];
-}
-
-/*
- * write wm8990 register cache
- */
-static inline void wm8990_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
-
- /* Reset register and reserved registers are uncached */
- if (reg == 0 || reg >= ARRAY_SIZE(wm8990_reg))
- return;
-
- cache[reg] = value;
-}
-
-/*
- * write to the wm8990 register space
- */
-static int wm8990_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[3];
-
- data[0] = reg & 0xFF;
- data[1] = (value >> 8) & 0xFF;
- data[2] = value & 0xFF;
-
- wm8990_write_reg_cache(codec, reg, value);
-
- if (codec->hw_write(codec->control_data, data, 3) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8990_reset(c) wm8990_write(c, WM8990_RESET, 0)
+#define wm8990_reset(c) snd_soc_write(c, WM8990_RESET, 0)
static const DECLARE_TLV_DB_LINEAR(rec_mix_tlv, -1500, 600);
@@ -187,8 +141,8 @@
return ret;
/* now hit the volume update bits (always bit 8) */
- val = wm8990_read_reg_cache(codec, reg);
- return wm8990_write(codec, reg, val | 0x0100);
+ val = snd_soc_read(codec, reg);
+ return snd_soc_write(codec, reg, val | 0x0100);
}
#define SOC_WM899X_OUTPGA_SINGLE_R_TLV(xname, reg, shift, max, invert,\
@@ -427,8 +381,8 @@
{
u16 reg, fakepower;
- reg = wm8990_read_reg_cache(w->codec, WM8990_POWER_MANAGEMENT_2);
- fakepower = wm8990_read_reg_cache(w->codec, WM8990_INTDRIVBITS);
+ reg = snd_soc_read(w->codec, WM8990_POWER_MANAGEMENT_2);
+ fakepower = snd_soc_read(w->codec, WM8990_INTDRIVBITS);
if (fakepower & ((1 << WM8990_INMIXL_PWR_BIT) |
(1 << WM8990_AINLMUX_PWR_BIT))) {
@@ -443,7 +397,7 @@
} else {
reg &= ~WM8990_AINL_ENA;
}
- wm8990_write(w->codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_write(w->codec, WM8990_POWER_MANAGEMENT_2, reg);
return 0;
}
@@ -457,7 +411,7 @@
switch (reg_shift) {
case WM8990_SPEAKER_MIXER | (WM8990_LDSPK_BIT << 8) :
- reg = wm8990_read_reg_cache(w->codec, WM8990_OUTPUT_MIXER1);
+ reg = snd_soc_read(w->codec, WM8990_OUTPUT_MIXER1);
if (reg & WM8990_LDLO) {
printk(KERN_WARNING
"Cannot set as Output Mixer 1 LDLO Set\n");
@@ -465,7 +419,7 @@
}
break;
case WM8990_SPEAKER_MIXER | (WM8990_RDSPK_BIT << 8):
- reg = wm8990_read_reg_cache(w->codec, WM8990_OUTPUT_MIXER2);
+ reg = snd_soc_read(w->codec, WM8990_OUTPUT_MIXER2);
if (reg & WM8990_RDRO) {
printk(KERN_WARNING
"Cannot set as Output Mixer 2 RDRO Set\n");
@@ -473,7 +427,7 @@
}
break;
case WM8990_OUTPUT_MIXER1 | (WM8990_LDLO_BIT << 8):
- reg = wm8990_read_reg_cache(w->codec, WM8990_SPEAKER_MIXER);
+ reg = snd_soc_read(w->codec, WM8990_SPEAKER_MIXER);
if (reg & WM8990_LDSPK) {
printk(KERN_WARNING
"Cannot set as Speaker Mixer LDSPK Set\n");
@@ -481,7 +435,7 @@
}
break;
case WM8990_OUTPUT_MIXER2 | (WM8990_RDRO_BIT << 8):
- reg = wm8990_read_reg_cache(w->codec, WM8990_SPEAKER_MIXER);
+ reg = snd_soc_read(w->codec, WM8990_SPEAKER_MIXER);
if (reg & WM8990_RDSPK) {
printk(KERN_WARNING
"Cannot set as Speaker Mixer RDSPK Set\n");
@@ -1029,24 +983,24 @@
pll_factors(&pll_div, freq_out * 4, freq_in);
/* Turn on PLL */
- reg = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_2);
+ reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
reg |= WM8990_PLL_ENA;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
/* sysclk comes from PLL */
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2);
- wm8990_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC);
/* set up N , fractional mode and pre-divisor if neccessary */
- wm8990_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
+ snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM |
(pll_div.div2?WM8990_PRESCALE:0));
- wm8990_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
- wm8990_write(codec, WM8990_PLL3, (u8)(pll_div.k & 0xFF));
+ snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8));
+ snd_soc_write(codec, WM8990_PLL3, (u8)(pll_div.k & 0xFF));
} else {
/* Turn on PLL */
- reg = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_2);
+ reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
reg &= ~WM8990_PLL_ENA;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg);
}
return 0;
}
@@ -1073,8 +1027,8 @@
struct snd_soc_codec *codec = codec_dai->codec;
u16 audio1, audio3;
- audio1 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_1);
- audio3 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_3);
+ audio1 = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_1);
+ audio3 = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_3);
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1115,8 +1069,8 @@
return -EINVAL;
}
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_3, audio3);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_3, audio3);
return 0;
}
@@ -1128,24 +1082,24 @@
switch (div_id) {
case WM8990_MCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
~WM8990_MCLK_DIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
break;
case WM8990_DACCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
~WM8990_DAC_CLKDIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
break;
case WM8990_ADCCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_2) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_2) &
~WM8990_ADC_CLKDIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_2, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_2, reg | div);
break;
case WM8990_BCLK_DIV:
- reg = wm8990_read_reg_cache(codec, WM8990_CLOCKING_1) &
+ reg = snd_soc_read(codec, WM8990_CLOCKING_1) &
~WM8990_BCLK_DIV_MASK;
- wm8990_write(codec, WM8990_CLOCKING_1, reg | div);
+ snd_soc_write(codec, WM8990_CLOCKING_1, reg | div);
break;
default:
return -EINVAL;
@@ -1164,7 +1118,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
- u16 audio1 = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_1);
+ u16 audio1 = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_1);
audio1 &= ~WM8990_AIF_WL_MASK;
/* bit size */
@@ -1182,7 +1136,7 @@
break;
}
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_1, audio1);
return 0;
}
@@ -1191,12 +1145,12 @@
struct snd_soc_codec *codec = dai->codec;
u16 val;
- val = wm8990_read_reg_cache(codec, WM8990_DAC_CTRL) & ~WM8990_DAC_MUTE;
+ val = snd_soc_read(codec, WM8990_DAC_CTRL) & ~WM8990_DAC_MUTE;
if (mute)
- wm8990_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
+ snd_soc_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
else
- wm8990_write(codec, WM8990_DAC_CTRL, val);
+ snd_soc_write(codec, WM8990_DAC_CTRL, val);
return 0;
}
@@ -1212,21 +1166,21 @@
case SND_SOC_BIAS_PREPARE:
/* VMID=2*50k */
- val = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_1) &
+ val = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_1) &
~WM8990_VMID_MODE_MASK;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x2);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x2);
break;
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Enable all output discharge bits */
- wm8990_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
+ snd_soc_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
WM8990_DIS_RLINE | WM8990_DIS_OUT3 |
WM8990_DIS_OUT4 | WM8990_DIS_LOUT |
WM8990_DIS_ROUT);
/* Enable POBCTRL, SOFT_ST, VMIDTOG and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL |
WM8990_VMIDTOG);
@@ -1234,83 +1188,83 @@
msleep(msecs_to_jiffies(300));
/* Disable VMIDTOG */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL);
/* disable all output discharge bits */
- wm8990_write(codec, WM8990_ANTIPOP1, 0);
+ snd_soc_write(codec, WM8990_ANTIPOP1, 0);
/* Enable outputs */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1b00);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1b00);
msleep(msecs_to_jiffies(50));
/* Enable VMID at 2x50k */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f02);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f02);
msleep(msecs_to_jiffies(100));
/* Enable VREF */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
msleep(msecs_to_jiffies(600));
/* Enable BUFIOEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL |
WM8990_BUFIOEN);
/* Disable outputs */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x3);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x3);
/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_BUFIOEN);
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_BUFIOEN);
/* Enable workaround for ADC clocking issue. */
- wm8990_write(codec, WM8990_EXT_ACCESS_ENA, 0x2);
- wm8990_write(codec, WM8990_EXT_CTL1, 0xa003);
- wm8990_write(codec, WM8990_EXT_ACCESS_ENA, 0);
+ snd_soc_write(codec, WM8990_EXT_ACCESS_ENA, 0x2);
+ snd_soc_write(codec, WM8990_EXT_CTL1, 0xa003);
+ snd_soc_write(codec, WM8990_EXT_ACCESS_ENA, 0);
}
/* VMID=2*250k */
- val = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_1) &
+ val = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_1) &
~WM8990_VMID_MODE_MASK;
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x4);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x4);
break;
case SND_SOC_BIAS_OFF:
/* Enable POBCTRL and SOFT_ST */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_POBCTRL | WM8990_BUFIOEN);
/* Enable POBCTRL, SOFT_ST and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
+ snd_soc_write(codec, WM8990_ANTIPOP2, WM8990_SOFTST |
WM8990_BUFDCOPEN | WM8990_POBCTRL |
WM8990_BUFIOEN);
/* mute DAC */
- val = wm8990_read_reg_cache(codec, WM8990_DAC_CTRL);
- wm8990_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
+ val = snd_soc_read(codec, WM8990_DAC_CTRL);
+ snd_soc_write(codec, WM8990_DAC_CTRL, val | WM8990_DAC_MUTE);
/* Enable any disabled outputs */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f03);
/* Disable VMID */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f01);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x1f01);
msleep(msecs_to_jiffies(300));
/* Enable all output discharge bits */
- wm8990_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
+ snd_soc_write(codec, WM8990_ANTIPOP1, WM8990_DIS_LLINE |
WM8990_DIS_RLINE | WM8990_DIS_OUT3 |
WM8990_DIS_OUT4 | WM8990_DIS_LOUT |
WM8990_DIS_ROUT);
/* Disable VREF */
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, 0x0);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_1, 0x0);
/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
- wm8990_write(codec, WM8990_ANTIPOP2, 0x0);
+ snd_soc_write(codec, WM8990_ANTIPOP2, 0x0);
break;
}
@@ -1411,8 +1365,6 @@
codec->name = "WM8990";
codec->owner = THIS_MODULE;
- codec->read = wm8990_read_reg_cache;
- codec->write = wm8990_write;
codec->set_bias_level = wm8990_set_bias_level;
codec->dai = &wm8990_dai;
codec->num_dai = 2;
@@ -1422,6 +1374,12 @@
if (codec->reg_cache == NULL)
return -ENOMEM;
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8990: failed to set cache I/O: %d\n", ret);
+ goto pcm_err;
+ }
+
wm8990_reset(codec);
/* register pcms */
@@ -1435,18 +1393,18 @@
codec->bias_level = SND_SOC_BIAS_OFF;
wm8990_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- reg = wm8990_read_reg_cache(codec, WM8990_AUDIO_INTERFACE_4);
- wm8990_write(codec, WM8990_AUDIO_INTERFACE_4, reg | WM8990_ALRCGPIO1);
+ reg = snd_soc_read(codec, WM8990_AUDIO_INTERFACE_4);
+ snd_soc_write(codec, WM8990_AUDIO_INTERFACE_4, reg | WM8990_ALRCGPIO1);
- reg = wm8990_read_reg_cache(codec, WM8990_GPIO1_GPIO2) &
+ reg = snd_soc_read(codec, WM8990_GPIO1_GPIO2) &
~WM8990_GPIO1_SEL_MASK;
- wm8990_write(codec, WM8990_GPIO1_GPIO2, reg | 1);
+ snd_soc_write(codec, WM8990_GPIO1_GPIO2, reg | 1);
- reg = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_2);
- wm8990_write(codec, WM8990_POWER_MANAGEMENT_2, reg | WM8990_OPCLK_ENA);
+ reg = snd_soc_read(codec, WM8990_POWER_MANAGEMENT_2);
+ snd_soc_write(codec, WM8990_POWER_MANAGEMENT_2, reg | WM8990_OPCLK_ENA);
- wm8990_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
- wm8990_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
+ snd_soc_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
+ snd_soc_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
snd_soc_add_controls(codec, wm8990_snd_controls,
ARRAY_SIZE(wm8990_snd_controls));
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
new file mode 100644
index 0000000..d998799
--- /dev/null
+++ b/sound/soc/codecs/wm8993.c
@@ -0,0 +1,1675 @@
+/*
+ * wm8993.c -- WM8993 ALSA SoC audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/wm8993.h>
+
+#include "wm8993.h"
+#include "wm_hubs.h"
+
+static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
+ 0x8993, /* R0 - Software Reset */
+ 0x0000, /* R1 - Power Management (1) */
+ 0x6000, /* R2 - Power Management (2) */
+ 0x0000, /* R3 - Power Management (3) */
+ 0x4050, /* R4 - Audio Interface (1) */
+ 0x4000, /* R5 - Audio Interface (2) */
+ 0x01C8, /* R6 - Clocking 1 */
+ 0x0000, /* R7 - Clocking 2 */
+ 0x0000, /* R8 - Audio Interface (3) */
+ 0x0040, /* R9 - Audio Interface (4) */
+ 0x0004, /* R10 - DAC CTRL */
+ 0x00C0, /* R11 - Left DAC Digital Volume */
+ 0x00C0, /* R12 - Right DAC Digital Volume */
+ 0x0000, /* R13 - Digital Side Tone */
+ 0x0300, /* R14 - ADC CTRL */
+ 0x00C0, /* R15 - Left ADC Digital Volume */
+ 0x00C0, /* R16 - Right ADC Digital Volume */
+ 0x0000, /* R17 */
+ 0x0000, /* R18 - GPIO CTRL 1 */
+ 0x0010, /* R19 - GPIO1 */
+ 0x0000, /* R20 - IRQ_DEBOUNCE */
+ 0x0000, /* R21 */
+ 0x8000, /* R22 - GPIOCTRL 2 */
+ 0x0800, /* R23 - GPIO_POL */
+ 0x008B, /* R24 - Left Line Input 1&2 Volume */
+ 0x008B, /* R25 - Left Line Input 3&4 Volume */
+ 0x008B, /* R26 - Right Line Input 1&2 Volume */
+ 0x008B, /* R27 - Right Line Input 3&4 Volume */
+ 0x006D, /* R28 - Left Output Volume */
+ 0x006D, /* R29 - Right Output Volume */
+ 0x0066, /* R30 - Line Outputs Volume */
+ 0x0020, /* R31 - HPOUT2 Volume */
+ 0x0079, /* R32 - Left OPGA Volume */
+ 0x0079, /* R33 - Right OPGA Volume */
+ 0x0003, /* R34 - SPKMIXL Attenuation */
+ 0x0003, /* R35 - SPKMIXR Attenuation */
+ 0x0011, /* R36 - SPKOUT Mixers */
+ 0x0100, /* R37 - SPKOUT Boost */
+ 0x0079, /* R38 - Speaker Volume Left */
+ 0x0079, /* R39 - Speaker Volume Right */
+ 0x0000, /* R40 - Input Mixer2 */
+ 0x0000, /* R41 - Input Mixer3 */
+ 0x0000, /* R42 - Input Mixer4 */
+ 0x0000, /* R43 - Input Mixer5 */
+ 0x0000, /* R44 - Input Mixer6 */
+ 0x0000, /* R45 - Output Mixer1 */
+ 0x0000, /* R46 - Output Mixer2 */
+ 0x0000, /* R47 - Output Mixer3 */
+ 0x0000, /* R48 - Output Mixer4 */
+ 0x0000, /* R49 - Output Mixer5 */
+ 0x0000, /* R50 - Output Mixer6 */
+ 0x0000, /* R51 - HPOUT2 Mixer */
+ 0x0000, /* R52 - Line Mixer1 */
+ 0x0000, /* R53 - Line Mixer2 */
+ 0x0000, /* R54 - Speaker Mixer */
+ 0x0000, /* R55 - Additional Control */
+ 0x0000, /* R56 - AntiPOP1 */
+ 0x0000, /* R57 - AntiPOP2 */
+ 0x0000, /* R58 - MICBIAS */
+ 0x0000, /* R59 */
+ 0x0000, /* R60 - FLL Control 1 */
+ 0x0000, /* R61 - FLL Control 2 */
+ 0x0000, /* R62 - FLL Control 3 */
+ 0x2EE0, /* R63 - FLL Control 4 */
+ 0x0002, /* R64 - FLL Control 5 */
+ 0x2287, /* R65 - Clocking 3 */
+ 0x025F, /* R66 - Clocking 4 */
+ 0x0000, /* R67 - MW Slave Control */
+ 0x0000, /* R68 */
+ 0x0002, /* R69 - Bus Control 1 */
+ 0x0000, /* R70 - Write Sequencer 0 */
+ 0x0000, /* R71 - Write Sequencer 1 */
+ 0x0000, /* R72 - Write Sequencer 2 */
+ 0x0000, /* R73 - Write Sequencer 3 */
+ 0x0000, /* R74 - Write Sequencer 4 */
+ 0x0000, /* R75 - Write Sequencer 5 */
+ 0x1F25, /* R76 - Charge Pump 1 */
+ 0x0000, /* R77 */
+ 0x0000, /* R78 */
+ 0x0000, /* R79 */
+ 0x0000, /* R80 */
+ 0x0000, /* R81 - Class W 0 */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 - DC Servo 0 */
+ 0x054A, /* R85 - DC Servo 1 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 - DC Servo 3 */
+ 0x0000, /* R88 - DC Servo Readback 0 */
+ 0x0000, /* R89 - DC Servo Readback 1 */
+ 0x0000, /* R90 - DC Servo Readback 2 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 */
+ 0x0000, /* R93 */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0100, /* R96 - Analogue HP 0 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 - EQ1 */
+ 0x000C, /* R99 - EQ2 */
+ 0x000C, /* R100 - EQ3 */
+ 0x000C, /* R101 - EQ4 */
+ 0x000C, /* R102 - EQ5 */
+ 0x000C, /* R103 - EQ6 */
+ 0x0FCA, /* R104 - EQ7 */
+ 0x0400, /* R105 - EQ8 */
+ 0x00D8, /* R106 - EQ9 */
+ 0x1EB5, /* R107 - EQ10 */
+ 0xF145, /* R108 - EQ11 */
+ 0x0B75, /* R109 - EQ12 */
+ 0x01C5, /* R110 - EQ13 */
+ 0x1C58, /* R111 - EQ14 */
+ 0xF373, /* R112 - EQ15 */
+ 0x0A54, /* R113 - EQ16 */
+ 0x0558, /* R114 - EQ17 */
+ 0x168E, /* R115 - EQ18 */
+ 0xF829, /* R116 - EQ19 */
+ 0x07AD, /* R117 - EQ20 */
+ 0x1103, /* R118 - EQ21 */
+ 0x0564, /* R119 - EQ22 */
+ 0x0559, /* R120 - EQ23 */
+ 0x4000, /* R121 - EQ24 */
+ 0x0000, /* R122 - Digital Pulls */
+ 0x0F08, /* R123 - DRC Control 1 */
+ 0x0000, /* R124 - DRC Control 2 */
+ 0x0080, /* R125 - DRC Control 3 */
+ 0x0000, /* R126 - DRC Control 4 */
+};
+
+static struct {
+ int ratio;
+ int clk_sys_rate;
+} clk_sys_rates[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 768, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+static struct {
+ int rate;
+ int sample_rate;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 1 },
+ { 16000, 2 },
+ { 22050, 3 },
+ { 24000, 3 },
+ { 32000, 4 },
+ { 44100, 5 },
+ { 48000, 5 },
+};
+
+static struct {
+ int div; /* *10 due to .5s */
+ int bclk_div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 55, 5 },
+ { 60, 6 },
+ { 80, 7 },
+ { 110, 8 },
+ { 120, 9 },
+ { 160, 10 },
+ { 220, 11 },
+ { 240, 12 },
+ { 320, 13 },
+ { 440, 14 },
+ { 480, 15 },
+};
+
+struct wm8993_priv {
+ u16 reg_cache[WM8993_REGISTER_COUNT];
+ struct wm8993_platform_data pdata;
+ struct snd_soc_codec codec;
+ int master;
+ int sysclk_source;
+ int tdm_slots;
+ int tdm_width;
+ unsigned int mclk_rate;
+ unsigned int sysclk_rate;
+ unsigned int fs;
+ unsigned int bclk;
+ int class_w_users;
+ unsigned int fll_fref;
+ unsigned int fll_fout;
+};
+
+static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg)
+{
+ struct i2c_msg xfer[2];
+ u16 data;
+ int ret;
+ struct i2c_client *i2c = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static int wm8993_volatile(unsigned int reg)
+{
+ switch (reg) {
+ case WM8993_SOFTWARE_RESET:
+ case WM8993_DC_SERVO_0:
+ case WM8993_DC_SERVO_READBACK_0:
+ case WM8993_DC_SERVO_READBACK_1:
+ case WM8993_DC_SERVO_READBACK_2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static unsigned int wm8993_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *reg_cache = codec->reg_cache;
+
+ BUG_ON(reg > WM8993_MAX_REGISTER);
+
+ if (wm8993_volatile(reg))
+ return wm8993_read_hw(codec, reg);
+ else
+ return reg_cache[reg];
+}
+
+static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ u8 data[3];
+ int ret;
+
+ BUG_ON(reg > WM8993_MAX_REGISTER);
+
+ /* data is
+ * D15..D9 WM8993 register offset
+ * D8...D0 register data
+ */
+ data[0] = reg;
+ data[1] = value >> 8;
+ data[2] = value & 0x00ff;
+
+ if (!wm8993_volatile(reg))
+ reg_cache[reg] = value;
+
+ ret = codec->hw_write(codec->control_data, data, 3);
+
+ if (ret == 3)
+ return 0;
+ if (ret < 0)
+ return ret;
+ return -EIO;
+}
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_clk_ref_div;
+ u16 n;
+ u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+ unsigned int div;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ fll_div->fll_clk_ref_div = 0;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+ fll_div->fll_clk_ref_div++;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+
+ pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 0;
+ target = Fout * 2;
+ while (target < 90000000) {
+ div++;
+ target *= 2;
+ if (div > 7) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ fll_div->fll_outdiv = div;
+
+ pr_debug("Fvco=%dHz\n", target);
+
+ /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ target /= fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ fll_div->n = Ndiv;
+ Nmod = target % Fref;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll_div->k = K / 10;
+
+ pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+ fll_div->n, fll_div->k,
+ fll_div->fll_fratio, fll_div->fll_outdiv,
+ fll_div->fll_clk_ref_div);
+
+ return 0;
+}
+
+static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ u16 reg1, reg4, reg5;
+ struct _fll_div fll_div;
+ int ret;
+
+ /* Any change? */
+ if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
+ return 0;
+
+ /* Disable the FLL */
+ if (Fout == 0) {
+ dev_dbg(codec->dev, "FLL disabled\n");
+ wm8993->fll_fref = 0;
+ wm8993->fll_fout = 0;
+
+ reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 &= ~WM8993_FLL_ENA;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ return 0;
+ }
+
+ ret = fll_factors(&fll_div, Fref, Fout);
+ if (ret != 0)
+ return ret;
+
+ reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5);
+ reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
+
+ switch (fll_id) {
+ case WM8993_FLL_MCLK:
+ break;
+
+ case WM8993_FLL_LRCLK:
+ reg5 |= 1;
+ break;
+
+ case WM8993_FLL_BCLK:
+ reg5 |= 2;
+ break;
+
+ default:
+ dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+ return -EINVAL;
+ }
+
+ /* Any FLL configuration change requires that the FLL be
+ * disabled first. */
+ reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 &= ~WM8993_FLL_ENA;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ /* Apply the configuration */
+ if (fll_div.k)
+ reg1 |= WM8993_FLL_FRAC_MASK;
+ else
+ reg1 &= ~WM8993_FLL_FRAC_MASK;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ wm8993_write(codec, WM8993_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
+ wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
+
+ reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4);
+ reg4 &= ~WM8993_FLL_N_MASK;
+ reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
+ wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4);
+
+ reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
+ reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
+ wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5);
+
+ /* Enable the FLL */
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
+
+ dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+ wm8993->fll_fref = Fref;
+ wm8993->fll_fout = Fout;
+
+ return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+ struct wm8993_priv *wm8993 = codec->private_data;
+ unsigned int reg;
+
+ /* This should be done on init() for bypass paths */
+ switch (wm8993->sysclk_source) {
+ case WM8993_SYSCLK_MCLK:
+ dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
+
+ reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
+ if (wm8993->mclk_rate > 13500000) {
+ reg |= WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->mclk_rate / 2;
+ } else {
+ reg &= ~WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->mclk_rate;
+ }
+ wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ break;
+
+ case WM8993_SYSCLK_FLL:
+ dev_dbg(codec->dev, "Using %dHz FLL clock\n",
+ wm8993->fll_fout);
+
+ reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg |= WM8993_SYSCLK_SRC;
+ if (wm8993->fll_fout > 13500000) {
+ reg |= WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->fll_fout / 2;
+ } else {
+ reg &= ~WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->fll_fout;
+ }
+ wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ break;
+
+ default:
+ dev_err(codec->dev, "System clock not configured\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
+
+ return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static const unsigned int drc_max_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
+
+static const char *dac_deemph_text[] = {
+ "None",
+ "32kHz",
+ "44.1kHz",
+ "48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+ SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
+
+static const char *adc_hpf_text[] = {
+ "Hi-Fi",
+ "Voice 1",
+ "Voice 2",
+ "Voice 3",
+};
+
+static const struct soc_enum adc_hpf =
+ SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
+
+static const char *drc_path_text[] = {
+ "ADC",
+ "DAC"
+};
+
+static const struct soc_enum drc_path =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
+
+static const char *drc_r0_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "1/16",
+ "0",
+};
+
+static const struct soc_enum drc_r0 =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
+
+static const char *drc_r1_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "0",
+};
+
+static const struct soc_enum drc_r1 =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
+
+static const char *drc_attack_text[] = {
+ "Reserved",
+ "181us",
+ "363us",
+ "726us",
+ "1.45ms",
+ "2.9ms",
+ "5.8ms",
+ "11.6ms",
+ "23.2ms",
+ "46.4ms",
+ "92.8ms",
+ "185.6ms",
+};
+
+static const struct soc_enum drc_attack =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
+
+static const char *drc_decay_text[] = {
+ "186ms",
+ "372ms",
+ "743ms",
+ "1.49s",
+ "2.97ms",
+ "5.94ms",
+ "11.89ms",
+ "23.78ms",
+ "47.56ms",
+};
+
+static const struct soc_enum drc_decay =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
+
+static const char *drc_ff_text[] = {
+ "5 samples",
+ "9 samples",
+};
+
+static const struct soc_enum drc_ff =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
+
+static const char *drc_qr_rate_text[] = {
+ "0.725ms",
+ "1.45ms",
+ "5.8ms",
+};
+
+static const struct soc_enum drc_qr_rate =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
+
+static const char *drc_smooth_text[] = {
+ "Low",
+ "Medium",
+ "High",
+};
+
+static const struct soc_enum drc_smooth =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
+
+static const struct snd_kcontrol_new wm8993_snd_controls[] = {
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
+ 5, 9, 12, 0, sidetone_tlv),
+
+SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
+SOC_ENUM("DRC Path", drc_path),
+SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8993_DRC_CONTROL_2,
+ 2, 60, 1, drc_comp_threash),
+SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
+ 11, 30, 1, drc_comp_amp),
+SOC_ENUM("DRC R0", drc_r0),
+SOC_ENUM("DRC R1", drc_r1),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
+ drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
+ drc_max_tlv),
+SOC_ENUM("DRC Attack Rate", drc_attack),
+SOC_ENUM("DRC Decay Rate", drc_decay),
+SOC_ENUM("DRC FF Delay", drc_ff),
+SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
+SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
+ drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
+SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
+SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
+SOC_ENUM("DRC Smoothing Hysteresis Threashold", drc_smooth),
+SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
+ drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
+ WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
+SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
+SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
+
+SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
+ WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
+SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
+ dac_boost_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+
+SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
+ 2, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
+ 2, 1, 1, wm_hubs_spkmix_tlv),
+};
+
+static const struct snd_kcontrol_new wm8993_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
+};
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ return configure_clock(codec);
+
+ case SND_SOC_DAPM_POST_PMD:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * When used with DAC outputs only the WM8993 charge pump supports
+ * operation in class W mode, providing very low power consumption
+ * when used with digital sources. Enable and disable this mode
+ * automatically depending on the mixer configuration.
+ *
+ * Currently the only supported paths are the direct DAC->headphone
+ * paths (which provide minimum power consumption anyway).
+ */
+static int class_w_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = widget->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret;
+
+ /* Turn it off if we're using the main output mixer */
+ if (ucontrol->value.integer.value[0] == 0) {
+ if (wm8993->class_w_users == 0) {
+ dev_dbg(codec->dev, "Disabling Class W\n");
+ snd_soc_update_bits(codec, WM8993_CLASS_W_0,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V,
+ 0);
+ }
+ wm8993->class_w_users++;
+ }
+
+ /* Implement the change */
+ ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ /* Enable it if we're using the direct DAC path */
+ if (ucontrol->value.integer.value[0] == 1) {
+ if (wm8993->class_w_users == 1) {
+ dev_dbg(codec->dev, "Enabling Class W\n");
+ snd_soc_update_bits(codec, WM8993_CLASS_W_0,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V);
+ }
+ wm8993->class_w_users--;
+ }
+
+ dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
+ wm8993->class_w_users);
+
+ return ret;
+}
+
+#define SOC_DAPM_ENUM_W(xname, xenum) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_enum_double, \
+ .get = snd_soc_dapm_get_enum_double, \
+ .put = class_w_put, \
+ .private_value = (unsigned long)&xenum }
+
+static const char *hp_mux_text[] = {
+ "Mixer",
+ "DAC",
+};
+
+static const struct soc_enum hpl_enum =
+ SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpl_mux =
+ SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
+
+static const struct soc_enum hpr_enum =
+ SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpr_mux =
+ SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
+
+static const struct snd_kcontrol_new left_speaker_mixer[] = {
+SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
+SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_mixer[] = {
+SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
+SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
+};
+
+static const char *aif_text[] = {
+ "Left", "Right"
+};
+
+static const struct soc_enum aifoutl_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
+
+static const struct snd_kcontrol_new aifoutl_mux =
+ SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
+
+static const struct soc_enum aifoutr_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
+
+static const struct snd_kcontrol_new aifoutr_mux =
+ SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
+
+static const struct soc_enum aifinl_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
+
+static const struct snd_kcontrol_new aifinl_mux =
+ SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
+
+static const struct soc_enum aifinr_enum =
+ SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
+
+static const struct snd_kcontrol_new aifinr_mux =
+ SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
+
+static const char *sidetone_text[] = {
+ "None", "Left", "Right"
+};
+
+static const struct soc_enum sidetonel_enum =
+ SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
+
+static const struct snd_kcontrol_new sidetonel_mux =
+ SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
+
+static const struct soc_enum sidetoner_enum =
+ SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
+
+static const struct snd_kcontrol_new sidetoner_mux =
+ SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
+
+static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
+
+SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
+SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
+
+SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
+
+SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
+SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
+
+SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
+SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
+
+SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
+SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
+
+SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
+SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
+
+SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
+ left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
+SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
+ right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
+
+};
+
+static const struct snd_soc_dapm_route routes[] = {
+ { "ADCL", NULL, "CLK_SYS" },
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "CLK_SYS" },
+ { "ADCR", NULL, "CLK_DSP" },
+
+ { "AIFOUTL Mux", "Left", "ADCL" },
+ { "AIFOUTL Mux", "Right", "ADCR" },
+ { "AIFOUTR Mux", "Left", "ADCL" },
+ { "AIFOUTR Mux", "Right", "ADCR" },
+
+ { "AIFOUTL", NULL, "AIFOUTL Mux" },
+ { "AIFOUTR", NULL, "AIFOUTR Mux" },
+
+ { "DACL Mux", "Left", "AIFINL" },
+ { "DACL Mux", "Right", "AIFINR" },
+ { "DACR Mux", "Left", "AIFINL" },
+ { "DACR Mux", "Right", "AIFINR" },
+
+ { "DACL Sidetone", "Left", "ADCL" },
+ { "DACL Sidetone", "Right", "ADCR" },
+ { "DACR Sidetone", "Left", "ADCL" },
+ { "DACR Sidetone", "Right", "ADCR" },
+
+ { "DACL", NULL, "CLK_SYS" },
+ { "DACL", NULL, "CLK_DSP" },
+ { "DACL", NULL, "DACL Mux" },
+ { "DACL", NULL, "DACL Sidetone" },
+ { "DACR", NULL, "CLK_SYS" },
+ { "DACR", NULL, "CLK_DSP" },
+ { "DACR", NULL, "DACR Mux" },
+ { "DACR", NULL, "DACR Sidetone" },
+
+ { "Left Output Mixer", "DAC Switch", "DACL" },
+
+ { "Right Output Mixer", "DAC Switch", "DACR" },
+
+ { "Left Output PGA", NULL, "CLK_SYS" },
+
+ { "Right Output PGA", NULL, "CLK_SYS" },
+
+ { "SPKL", "DAC Switch", "DACL" },
+ { "SPKL", NULL, "CLK_SYS" },
+
+ { "SPKR", "DAC Switch", "DACR" },
+ { "SPKR", NULL, "CLK_SYS" },
+
+ { "Left Headphone Mux", "DAC", "DACL" },
+ { "Right Headphone Mux", "DAC", "DACR" },
+};
+
+static int wm8993_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8993_priv *wm8993 = codec->private_data;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID=2*40k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK, 0x2);
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
+ WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Bring up VMID with fast soft start */
+ snd_soc_update_bits(codec, WM8993_ANTIPOP2,
+ WM8993_STARTUP_BIAS_ENA |
+ WM8993_VMID_BUF_ENA |
+ WM8993_VMID_RAMP_MASK |
+ WM8993_BIAS_SRC,
+ WM8993_STARTUP_BIAS_ENA |
+ WM8993_VMID_BUF_ENA |
+ WM8993_VMID_RAMP_MASK |
+ WM8993_BIAS_SRC);
+
+ /* If either line output is single ended we
+ * need the VMID buffer */
+ if (!wm8993->pdata.lineout1_diff ||
+ !wm8993->pdata.lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+ WM8993_LINEOUT_VMID_BUF_ENA,
+ WM8993_LINEOUT_VMID_BUF_ENA);
+
+ /* VMID=2*40k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK |
+ WM8993_BIAS_ENA,
+ WM8993_BIAS_ENA | 0x2);
+ msleep(32);
+
+ /* Switch to normal bias */
+ snd_soc_update_bits(codec, WM8993_ANTIPOP2,
+ WM8993_BIAS_SRC |
+ WM8993_STARTUP_BIAS_ENA, 0);
+ }
+
+ /* VMID=2*240k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK, 0x4);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
+ WM8993_TSHUT_ENA, 0);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+ WM8993_LINEOUT_VMID_BUF_ENA, 0);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
+ 0);
+ break;
+ }
+
+ codec->bias_level = level;
+
+ return 0;
+}
+
+static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+
+ switch (clk_id) {
+ case WM8993_SYSCLK_MCLK:
+ wm8993->mclk_rate = freq;
+ case WM8993_SYSCLK_FLL:
+ wm8993->sysclk_source = clk_id;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+
+ aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
+ WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
+ aif4 &= ~WM8993_LRCLK_DIR;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ wm8993->master = 0;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif4 |= WM8993_LRCLK_DIR;
+ wm8993->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif1 |= WM8993_BCLK_DIR;
+ wm8993->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif1 |= WM8993_BCLK_DIR;
+ aif4 |= WM8993_LRCLK_DIR;
+ wm8993->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= WM8993_AIF_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x18;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif1 |= 0x8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8993_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8993_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8993_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+
+ return 0;
+}
+
+static int wm8993_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret, i, best, best_val, cur_val;
+ unsigned int clocking1, clocking3, aif1, aif4;
+
+ clocking1 = wm8993_read(codec, WM8993_CLOCKING_1);
+ clocking1 &= ~WM8993_BCLK_DIV_MASK;
+
+ clocking3 = wm8993_read(codec, WM8993_CLOCKING_3);
+ clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
+
+ aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ aif1 &= ~WM8993_AIF_WL_MASK;
+
+ aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ aif4 &= ~WM8993_LRCLK_RATE_MASK;
+
+ /* What BCLK do we need? */
+ wm8993->fs = params_rate(params);
+ wm8993->bclk = 2 * wm8993->fs;
+ if (wm8993->tdm_slots) {
+ dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
+ wm8993->tdm_slots, wm8993->tdm_width);
+ wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
+ } else {
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wm8993->bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wm8993->bclk *= 20;
+ aif1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wm8993->bclk *= 24;
+ aif1 |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wm8993->bclk *= 32;
+ aif1 |= 0x18;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
+
+ ret = configure_clock(codec);
+ if (ret != 0)
+ return ret;
+
+ /* Select nearest CLK_SYS_RATE */
+ best = 0;
+ best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
+ - wm8993->fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ cur_val = abs((wm8993->sysclk_rate /
+ clk_sys_rates[i].ratio) - wm8993->fs);;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+ clk_sys_rates[best].ratio);
+ clocking3 |= (clk_sys_rates[best].clk_sys_rate
+ << WM8993_CLK_SYS_RATE_SHIFT);
+
+ /* SAMPLE_RATE */
+ best = 0;
+ best_val = abs(wm8993->fs - sample_rates[0].rate);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ /* Closest match */
+ cur_val = abs(wm8993->fs - sample_rates[i].rate);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+ sample_rates[best].rate);
+ clocking3 |= (sample_rates[best].sample_rate
+ << WM8993_SAMPLE_RATE_SHIFT);
+
+ /* BCLK_DIV */
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
+ - wm8993->bclk;
+ if (cur_val < 0) /* Table is sorted */
+ break;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
+ dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+ bclk_divs[best].div, wm8993->bclk);
+ clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
+
+ /* LRCLK is a simple fraction of BCLK */
+ dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
+ aif4 |= wm8993->bclk / wm8993->fs;
+
+ wm8993_write(codec, WM8993_CLOCKING_1, clocking1);
+ wm8993_write(codec, WM8993_CLOCKING_3, clocking3);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+
+ /* ReTune Mobile? */
+ if (wm8993->pdata.num_retune_configs) {
+ u16 eq1 = wm8993_read(codec, WM8993_EQ1);
+ struct wm8993_retune_mobile_setting *s;
+
+ best = 0;
+ best_val = abs(wm8993->pdata.retune_configs[0].rate
+ - wm8993->fs);
+ for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
+ cur_val = abs(wm8993->pdata.retune_configs[i].rate
+ - wm8993->fs);
+ if (cur_val < best_val) {
+ best_val = cur_val;
+ best = i;
+ }
+ }
+ s = &wm8993->pdata.retune_configs[best];
+
+ dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
+ s->name, s->rate);
+
+ /* Disable EQ while we reconfigure */
+ snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
+
+ for (i = 1; i < ARRAY_SIZE(s->config); i++)
+ wm8993_write(codec, WM8993_EQ1 + i, s->config[i]);
+
+ snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
+ }
+
+ return 0;
+}
+
+static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ unsigned int reg;
+
+ reg = wm8993_read(codec, WM8993_DAC_CTRL);
+
+ if (mute)
+ reg |= WM8993_DAC_MUTE;
+ else
+ reg &= ~WM8993_DAC_MUTE;
+
+ wm8993_write(codec, WM8993_DAC_CTRL, reg);
+
+ return 0;
+}
+
+static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int aif1 = 0;
+ int aif2 = 0;
+
+ /* Don't need to validate anything if we're turning off TDM */
+ if (slots == 0) {
+ wm8993->tdm_slots = 0;
+ goto out;
+ }
+
+ /* Note that we allow configurations we can't handle ourselves -
+ * for example, we can generate clocks for slots 2 and up even if
+ * we can't use those slots ourselves.
+ */
+ aif1 |= WM8993_AIFADC_TDM;
+ aif2 |= WM8993_AIFDAC_TDM;
+
+ switch (rx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif1 |= WM8993_AIFADC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ switch (tx_mask) {
+ case 3:
+ break;
+ case 0xc:
+ aif2 |= WM8993_AIFDAC_TDM_CHAN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+out:
+ wm8993->tdm_width = slot_width;
+ wm8993->tdm_slots = slots / 2;
+
+ snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
+ WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
+ snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
+ WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops wm8993_ops = {
+ .set_sysclk = wm8993_set_sysclk,
+ .set_fmt = wm8993_set_dai_fmt,
+ .hw_params = wm8993_hw_params,
+ .digital_mute = wm8993_digital_mute,
+ .set_pll = wm8993_set_fll,
+ .set_tdm_slot = wm8993_set_tdm_slot,
+};
+
+#define WM8993_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE |\
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai wm8993_dai = {
+ .name = "WM8993",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8993_RATES,
+ .formats = WM8993_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8993_RATES,
+ .formats = WM8993_FORMATS,
+ },
+ .ops = &wm8993_ops,
+ .symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8993_dai);
+
+static struct snd_soc_codec *wm8993_codec;
+
+static int wm8993_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct wm8993_priv *wm8993;
+ int ret = 0;
+
+ if (!wm8993_codec) {
+ dev_err(&pdev->dev, "I2C device not yet probed\n");
+ goto err;
+ }
+
+ socdev->card->codec = wm8993_codec;
+ codec = wm8993_codec;
+ wm8993 = codec->private_data;
+
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms\n");
+ goto err;
+ }
+
+ snd_soc_add_controls(codec, wm8993_snd_controls,
+ ARRAY_SIZE(wm8993_snd_controls));
+ if (wm8993->pdata.num_retune_configs != 0) {
+ dev_dbg(codec->dev, "Using ReTune Mobile\n");
+ } else {
+ dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
+ snd_soc_add_controls(codec, wm8993_eq_controls,
+ ARRAY_SIZE(wm8993_eq_controls));
+ }
+
+ snd_soc_dapm_new_controls(codec, wm8993_dapm_widgets,
+ ARRAY_SIZE(wm8993_dapm_widgets));
+ wm_hubs_add_analogue_controls(codec);
+
+ snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
+ wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
+ wm8993->pdata.lineout2_diff);
+
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+err:
+ return ret;
+}
+
+static int wm8993_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8993 = {
+ .probe = wm8993_probe,
+ .remove = wm8993_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
+
+static int wm8993_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8993_priv *wm8993;
+ struct snd_soc_codec *codec;
+ unsigned int val;
+ int ret;
+
+ if (wm8993_codec) {
+ dev_err(&i2c->dev, "A WM8993 is already registered\n");
+ return -EINVAL;
+ }
+
+ wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
+ if (wm8993 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8993->codec;
+ if (i2c->dev.platform_data)
+ memcpy(&wm8993->pdata, i2c->dev.platform_data,
+ sizeof(wm8993->pdata));
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->name = "WM8993";
+ codec->read = wm8993_read;
+ codec->write = wm8993_write;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->reg_cache = wm8993->reg_cache;
+ codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8993_set_bias_level;
+ codec->dai = &wm8993_dai;
+ codec->num_dai = 1;
+ codec->private_data = wm8993;
+
+ memcpy(wm8993->reg_cache, wm8993_reg_defaults,
+ sizeof(wm8993->reg_cache));
+
+ i2c_set_clientdata(i2c, wm8993);
+ codec->control_data = i2c;
+ wm8993_codec = codec;
+
+ codec->dev = &i2c->dev;
+
+ val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET);
+ if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
+ dev_err(codec->dev, "Invalid ID register value %x\n", val);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
+ if (ret != 0)
+ goto err;
+
+ /* By default we're using the output mixers */
+ wm8993->class_w_users = 2;
+
+ /* Latch volume update bits and default ZC on */
+ snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
+ WM8993_DAC_VU, WM8993_DAC_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
+ WM8993_ADC_VU, WM8993_ADC_VU);
+
+ /* Manualy manage the HPOUT sequencing for independent stereo
+ * control. */
+ snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
+ WM8993_HPOUT1_AUTO_PU, 0);
+
+ /* Use automatic clock configuration */
+ snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
+
+ if (!wm8993->pdata.lineout1_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
+ WM8993_LINEOUT1_MODE,
+ WM8993_LINEOUT1_MODE);
+ if (!wm8993->pdata.lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
+ WM8993_LINEOUT2_MODE,
+ WM8993_LINEOUT2_MODE);
+
+ if (wm8993->pdata.lineout1fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
+
+ if (wm8993->pdata.lineout2fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
+
+ /* Apply the microphone bias/detection configuration - the
+ * platform data is directly applicable to the register. */
+ snd_soc_update_bits(codec, WM8993_MICBIAS,
+ WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
+ WM8993_MICB1_LVL | WM8993_MICB2_LVL,
+ wm8993->pdata.jd_scthr << WM8993_JD_SCTHR_SHIFT |
+ wm8993->pdata.jd_thr << WM8993_JD_THR_SHIFT |
+ wm8993->pdata.micbias1_lvl |
+ wm8993->pdata.micbias1_lvl << 1);
+
+ ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ if (ret != 0)
+ goto err;
+
+ wm8993_dai.dev = codec->dev;
+
+ ret = snd_soc_register_dai(&wm8993_dai);
+ if (ret != 0)
+ goto err_bias;
+
+ ret = snd_soc_register_codec(codec);
+
+ return 0;
+
+err_bias:
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+err:
+ wm8993_codec = NULL;
+ kfree(wm8993);
+ return ret;
+}
+
+static int wm8993_i2c_remove(struct i2c_client *client)
+{
+ struct wm8993_priv *wm8993 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&wm8993->codec);
+ snd_soc_unregister_dai(&wm8993_dai);
+
+ wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
+ kfree(wm8993);
+
+ return 0;
+}
+
+static const struct i2c_device_id wm8993_i2c_id[] = {
+ { "wm8993", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
+
+static struct i2c_driver wm8993_i2c_driver = {
+ .driver = {
+ .name = "WM8993",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8993_i2c_probe,
+ .remove = wm8993_i2c_remove,
+ .id_table = wm8993_i2c_id,
+};
+
+
+static int __init wm8993_modinit(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm8993_i2c_driver);
+ if (ret != 0)
+ pr_err("WM8993: Unable to register I2C driver: %d\n", ret);
+
+ return ret;
+}
+module_init(wm8993_modinit);
+
+static void __exit wm8993_exit(void)
+{
+ i2c_del_driver(&wm8993_i2c_driver);
+}
+module_exit(wm8993_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8993 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8993.h b/sound/soc/codecs/wm8993.h
new file mode 100644
index 0000000..30e71ca
--- /dev/null
+++ b/sound/soc/codecs/wm8993.h
@@ -0,0 +1,2132 @@
+#ifndef WM8993_H
+#define WM8993_H
+
+extern struct snd_soc_dai wm8993_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8993;
+
+#define WM8993_SYSCLK_MCLK 1
+#define WM8993_SYSCLK_FLL 2
+
+#define WM8993_FLL_MCLK 1
+#define WM8993_FLL_BCLK 2
+#define WM8993_FLL_LRCLK 3
+
+/*
+ * Register values.
+ */
+#define WM8993_SOFTWARE_RESET 0x00
+#define WM8993_POWER_MANAGEMENT_1 0x01
+#define WM8993_POWER_MANAGEMENT_2 0x02
+#define WM8993_POWER_MANAGEMENT_3 0x03
+#define WM8993_AUDIO_INTERFACE_1 0x04
+#define WM8993_AUDIO_INTERFACE_2 0x05
+#define WM8993_CLOCKING_1 0x06
+#define WM8993_CLOCKING_2 0x07
+#define WM8993_AUDIO_INTERFACE_3 0x08
+#define WM8993_AUDIO_INTERFACE_4 0x09
+#define WM8993_DAC_CTRL 0x0A
+#define WM8993_LEFT_DAC_DIGITAL_VOLUME 0x0B
+#define WM8993_RIGHT_DAC_DIGITAL_VOLUME 0x0C
+#define WM8993_DIGITAL_SIDE_TONE 0x0D
+#define WM8993_ADC_CTRL 0x0E
+#define WM8993_LEFT_ADC_DIGITAL_VOLUME 0x0F
+#define WM8993_RIGHT_ADC_DIGITAL_VOLUME 0x10
+#define WM8993_GPIO_CTRL_1 0x12
+#define WM8993_GPIO1 0x13
+#define WM8993_IRQ_DEBOUNCE 0x14
+#define WM8993_GPIOCTRL_2 0x16
+#define WM8993_GPIO_POL 0x17
+#define WM8993_LEFT_LINE_INPUT_1_2_VOLUME 0x18
+#define WM8993_LEFT_LINE_INPUT_3_4_VOLUME 0x19
+#define WM8993_RIGHT_LINE_INPUT_1_2_VOLUME 0x1A
+#define WM8993_RIGHT_LINE_INPUT_3_4_VOLUME 0x1B
+#define WM8993_LEFT_OUTPUT_VOLUME 0x1C
+#define WM8993_RIGHT_OUTPUT_VOLUME 0x1D
+#define WM8993_LINE_OUTPUTS_VOLUME 0x1E
+#define WM8993_HPOUT2_VOLUME 0x1F
+#define WM8993_LEFT_OPGA_VOLUME 0x20
+#define WM8993_RIGHT_OPGA_VOLUME 0x21
+#define WM8993_SPKMIXL_ATTENUATION 0x22
+#define WM8993_SPKMIXR_ATTENUATION 0x23
+#define WM8993_SPKOUT_MIXERS 0x24
+#define WM8993_SPKOUT_BOOST 0x25
+#define WM8993_SPEAKER_VOLUME_LEFT 0x26
+#define WM8993_SPEAKER_VOLUME_RIGHT 0x27
+#define WM8993_INPUT_MIXER2 0x28
+#define WM8993_INPUT_MIXER3 0x29
+#define WM8993_INPUT_MIXER4 0x2A
+#define WM8993_INPUT_MIXER5 0x2B
+#define WM8993_INPUT_MIXER6 0x2C
+#define WM8993_OUTPUT_MIXER1 0x2D
+#define WM8993_OUTPUT_MIXER2 0x2E
+#define WM8993_OUTPUT_MIXER3 0x2F
+#define WM8993_OUTPUT_MIXER4 0x30
+#define WM8993_OUTPUT_MIXER5 0x31
+#define WM8993_OUTPUT_MIXER6 0x32
+#define WM8993_HPOUT2_MIXER 0x33
+#define WM8993_LINE_MIXER1 0x34
+#define WM8993_LINE_MIXER2 0x35
+#define WM8993_SPEAKER_MIXER 0x36
+#define WM8993_ADDITIONAL_CONTROL 0x37
+#define WM8993_ANTIPOP1 0x38
+#define WM8993_ANTIPOP2 0x39
+#define WM8993_MICBIAS 0x3A
+#define WM8993_FLL_CONTROL_1 0x3C
+#define WM8993_FLL_CONTROL_2 0x3D
+#define WM8993_FLL_CONTROL_3 0x3E
+#define WM8993_FLL_CONTROL_4 0x3F
+#define WM8993_FLL_CONTROL_5 0x40
+#define WM8993_CLOCKING_3 0x41
+#define WM8993_CLOCKING_4 0x42
+#define WM8993_MW_SLAVE_CONTROL 0x43
+#define WM8993_BUS_CONTROL_1 0x45
+#define WM8993_WRITE_SEQUENCER_0 0x46
+#define WM8993_WRITE_SEQUENCER_1 0x47
+#define WM8993_WRITE_SEQUENCER_2 0x48
+#define WM8993_WRITE_SEQUENCER_3 0x49
+#define WM8993_WRITE_SEQUENCER_4 0x4A
+#define WM8993_WRITE_SEQUENCER_5 0x4B
+#define WM8993_CHARGE_PUMP_1 0x4C
+#define WM8993_CLASS_W_0 0x51
+#define WM8993_DC_SERVO_0 0x54
+#define WM8993_DC_SERVO_1 0x55
+#define WM8993_DC_SERVO_3 0x57
+#define WM8993_DC_SERVO_READBACK_0 0x58
+#define WM8993_DC_SERVO_READBACK_1 0x59
+#define WM8993_DC_SERVO_READBACK_2 0x5A
+#define WM8993_ANALOGUE_HP_0 0x60
+#define WM8993_EQ1 0x62
+#define WM8993_EQ2 0x63
+#define WM8993_EQ3 0x64
+#define WM8993_EQ4 0x65
+#define WM8993_EQ5 0x66
+#define WM8993_EQ6 0x67
+#define WM8993_EQ7 0x68
+#define WM8993_EQ8 0x69
+#define WM8993_EQ9 0x6A
+#define WM8993_EQ10 0x6B
+#define WM8993_EQ11 0x6C
+#define WM8993_EQ12 0x6D
+#define WM8993_EQ13 0x6E
+#define WM8993_EQ14 0x6F
+#define WM8993_EQ15 0x70
+#define WM8993_EQ16 0x71
+#define WM8993_EQ17 0x72
+#define WM8993_EQ18 0x73
+#define WM8993_EQ19 0x74
+#define WM8993_EQ20 0x75
+#define WM8993_EQ21 0x76
+#define WM8993_EQ22 0x77
+#define WM8993_EQ23 0x78
+#define WM8993_EQ24 0x79
+#define WM8993_DIGITAL_PULLS 0x7A
+#define WM8993_DRC_CONTROL_1 0x7B
+#define WM8993_DRC_CONTROL_2 0x7C
+#define WM8993_DRC_CONTROL_3 0x7D
+#define WM8993_DRC_CONTROL_4 0x7E
+
+#define WM8993_REGISTER_COUNT 0x7F
+#define WM8993_MAX_REGISTER 0x7E
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+#define WM8993_SW_RESET_MASK 0xFFFF /* SW_RESET - [15:0] */
+#define WM8993_SW_RESET_SHIFT 0 /* SW_RESET - [15:0] */
+#define WM8993_SW_RESET_WIDTH 16 /* SW_RESET - [15:0] */
+
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+#define WM8993_SPKOUTR_ENA 0x2000 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTR_ENA_MASK 0x2000 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTR_ENA_SHIFT 13 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTR_ENA_WIDTH 1 /* SPKOUTR_ENA */
+#define WM8993_SPKOUTL_ENA 0x1000 /* SPKOUTL_ENA */
+#define WM8993_SPKOUTL_ENA_MASK 0x1000 /* SPKOUTL_ENA */
+#define WM8993_SPKOUTL_ENA_SHIFT 12 /* SPKOUTL_ENA */
+#define WM8993_SPKOUTL_ENA_WIDTH 1 /* SPKOUTL_ENA */
+#define WM8993_HPOUT2_ENA 0x0800 /* HPOUT2_ENA */
+#define WM8993_HPOUT2_ENA_MASK 0x0800 /* HPOUT2_ENA */
+#define WM8993_HPOUT2_ENA_SHIFT 11 /* HPOUT2_ENA */
+#define WM8993_HPOUT2_ENA_WIDTH 1 /* HPOUT2_ENA */
+#define WM8993_HPOUT1L_ENA 0x0200 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1L_ENA_MASK 0x0200 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1L_ENA_SHIFT 9 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1L_ENA_WIDTH 1 /* HPOUT1L_ENA */
+#define WM8993_HPOUT1R_ENA 0x0100 /* HPOUT1R_ENA */
+#define WM8993_HPOUT1R_ENA_MASK 0x0100 /* HPOUT1R_ENA */
+#define WM8993_HPOUT1R_ENA_SHIFT 8 /* HPOUT1R_ENA */
+#define WM8993_HPOUT1R_ENA_WIDTH 1 /* HPOUT1R_ENA */
+#define WM8993_MICB2_ENA 0x0020 /* MICB2_ENA */
+#define WM8993_MICB2_ENA_MASK 0x0020 /* MICB2_ENA */
+#define WM8993_MICB2_ENA_SHIFT 5 /* MICB2_ENA */
+#define WM8993_MICB2_ENA_WIDTH 1 /* MICB2_ENA */
+#define WM8993_MICB1_ENA 0x0010 /* MICB1_ENA */
+#define WM8993_MICB1_ENA_MASK 0x0010 /* MICB1_ENA */
+#define WM8993_MICB1_ENA_SHIFT 4 /* MICB1_ENA */
+#define WM8993_MICB1_ENA_WIDTH 1 /* MICB1_ENA */
+#define WM8993_VMID_SEL_MASK 0x0006 /* VMID_SEL - [2:1] */
+#define WM8993_VMID_SEL_SHIFT 1 /* VMID_SEL - [2:1] */
+#define WM8993_VMID_SEL_WIDTH 2 /* VMID_SEL - [2:1] */
+#define WM8993_BIAS_ENA 0x0001 /* BIAS_ENA */
+#define WM8993_BIAS_ENA_MASK 0x0001 /* BIAS_ENA */
+#define WM8993_BIAS_ENA_SHIFT 0 /* BIAS_ENA */
+#define WM8993_BIAS_ENA_WIDTH 1 /* BIAS_ENA */
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+#define WM8993_TSHUT_ENA 0x4000 /* TSHUT_ENA */
+#define WM8993_TSHUT_ENA_MASK 0x4000 /* TSHUT_ENA */
+#define WM8993_TSHUT_ENA_SHIFT 14 /* TSHUT_ENA */
+#define WM8993_TSHUT_ENA_WIDTH 1 /* TSHUT_ENA */
+#define WM8993_TSHUT_OPDIS 0x2000 /* TSHUT_OPDIS */
+#define WM8993_TSHUT_OPDIS_MASK 0x2000 /* TSHUT_OPDIS */
+#define WM8993_TSHUT_OPDIS_SHIFT 13 /* TSHUT_OPDIS */
+#define WM8993_TSHUT_OPDIS_WIDTH 1 /* TSHUT_OPDIS */
+#define WM8993_OPCLK_ENA 0x0800 /* OPCLK_ENA */
+#define WM8993_OPCLK_ENA_MASK 0x0800 /* OPCLK_ENA */
+#define WM8993_OPCLK_ENA_SHIFT 11 /* OPCLK_ENA */
+#define WM8993_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */
+#define WM8993_MIXINL_ENA 0x0200 /* MIXINL_ENA */
+#define WM8993_MIXINL_ENA_MASK 0x0200 /* MIXINL_ENA */
+#define WM8993_MIXINL_ENA_SHIFT 9 /* MIXINL_ENA */
+#define WM8993_MIXINL_ENA_WIDTH 1 /* MIXINL_ENA */
+#define WM8993_MIXINR_ENA 0x0100 /* MIXINR_ENA */
+#define WM8993_MIXINR_ENA_MASK 0x0100 /* MIXINR_ENA */
+#define WM8993_MIXINR_ENA_SHIFT 8 /* MIXINR_ENA */
+#define WM8993_MIXINR_ENA_WIDTH 1 /* MIXINR_ENA */
+#define WM8993_IN2L_ENA 0x0080 /* IN2L_ENA */
+#define WM8993_IN2L_ENA_MASK 0x0080 /* IN2L_ENA */
+#define WM8993_IN2L_ENA_SHIFT 7 /* IN2L_ENA */
+#define WM8993_IN2L_ENA_WIDTH 1 /* IN2L_ENA */
+#define WM8993_IN1L_ENA 0x0040 /* IN1L_ENA */
+#define WM8993_IN1L_ENA_MASK 0x0040 /* IN1L_ENA */
+#define WM8993_IN1L_ENA_SHIFT 6 /* IN1L_ENA */
+#define WM8993_IN1L_ENA_WIDTH 1 /* IN1L_ENA */
+#define WM8993_IN2R_ENA 0x0020 /* IN2R_ENA */
+#define WM8993_IN2R_ENA_MASK 0x0020 /* IN2R_ENA */
+#define WM8993_IN2R_ENA_SHIFT 5 /* IN2R_ENA */
+#define WM8993_IN2R_ENA_WIDTH 1 /* IN2R_ENA */
+#define WM8993_IN1R_ENA 0x0010 /* IN1R_ENA */
+#define WM8993_IN1R_ENA_MASK 0x0010 /* IN1R_ENA */
+#define WM8993_IN1R_ENA_SHIFT 4 /* IN1R_ENA */
+#define WM8993_IN1R_ENA_WIDTH 1 /* IN1R_ENA */
+#define WM8993_ADCL_ENA 0x0002 /* ADCL_ENA */
+#define WM8993_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */
+#define WM8993_ADCL_ENA_SHIFT 1 /* ADCL_ENA */
+#define WM8993_ADCL_ENA_WIDTH 1 /* ADCL_ENA */
+#define WM8993_ADCR_ENA 0x0001 /* ADCR_ENA */
+#define WM8993_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */
+#define WM8993_ADCR_ENA_SHIFT 0 /* ADCR_ENA */
+#define WM8993_ADCR_ENA_WIDTH 1 /* ADCR_ENA */
+
+/*
+ * R3 (0x03) - Power Management (3)
+ */
+#define WM8993_LINEOUT1N_ENA 0x2000 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1N_ENA_MASK 0x2000 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1N_ENA_SHIFT 13 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1N_ENA_WIDTH 1 /* LINEOUT1N_ENA */
+#define WM8993_LINEOUT1P_ENA 0x1000 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT1P_ENA_MASK 0x1000 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT1P_ENA_SHIFT 12 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT1P_ENA_WIDTH 1 /* LINEOUT1P_ENA */
+#define WM8993_LINEOUT2N_ENA 0x0800 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2N_ENA_MASK 0x0800 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2N_ENA_SHIFT 11 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2N_ENA_WIDTH 1 /* LINEOUT2N_ENA */
+#define WM8993_LINEOUT2P_ENA 0x0400 /* LINEOUT2P_ENA */
+#define WM8993_LINEOUT2P_ENA_MASK 0x0400 /* LINEOUT2P_ENA */
+#define WM8993_LINEOUT2P_ENA_SHIFT 10 /* LINEOUT2P_ENA */
+#define WM8993_LINEOUT2P_ENA_WIDTH 1 /* LINEOUT2P_ENA */
+#define WM8993_SPKRVOL_ENA 0x0200 /* SPKRVOL_ENA */
+#define WM8993_SPKRVOL_ENA_MASK 0x0200 /* SPKRVOL_ENA */
+#define WM8993_SPKRVOL_ENA_SHIFT 9 /* SPKRVOL_ENA */
+#define WM8993_SPKRVOL_ENA_WIDTH 1 /* SPKRVOL_ENA */
+#define WM8993_SPKLVOL_ENA 0x0100 /* SPKLVOL_ENA */
+#define WM8993_SPKLVOL_ENA_MASK 0x0100 /* SPKLVOL_ENA */
+#define WM8993_SPKLVOL_ENA_SHIFT 8 /* SPKLVOL_ENA */
+#define WM8993_SPKLVOL_ENA_WIDTH 1 /* SPKLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA 0x0080 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA_MASK 0x0080 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA_SHIFT 7 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTLVOL_ENA_WIDTH 1 /* MIXOUTLVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA 0x0040 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA_MASK 0x0040 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA_SHIFT 6 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTRVOL_ENA_WIDTH 1 /* MIXOUTRVOL_ENA */
+#define WM8993_MIXOUTL_ENA 0x0020 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTL_ENA_MASK 0x0020 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTL_ENA_SHIFT 5 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTL_ENA_WIDTH 1 /* MIXOUTL_ENA */
+#define WM8993_MIXOUTR_ENA 0x0010 /* MIXOUTR_ENA */
+#define WM8993_MIXOUTR_ENA_MASK 0x0010 /* MIXOUTR_ENA */
+#define WM8993_MIXOUTR_ENA_SHIFT 4 /* MIXOUTR_ENA */
+#define WM8993_MIXOUTR_ENA_WIDTH 1 /* MIXOUTR_ENA */
+#define WM8993_DACL_ENA 0x0002 /* DACL_ENA */
+#define WM8993_DACL_ENA_MASK 0x0002 /* DACL_ENA */
+#define WM8993_DACL_ENA_SHIFT 1 /* DACL_ENA */
+#define WM8993_DACL_ENA_WIDTH 1 /* DACL_ENA */
+#define WM8993_DACR_ENA 0x0001 /* DACR_ENA */
+#define WM8993_DACR_ENA_MASK 0x0001 /* DACR_ENA */
+#define WM8993_DACR_ENA_SHIFT 0 /* DACR_ENA */
+#define WM8993_DACR_ENA_WIDTH 1 /* DACR_ENA */
+
+/*
+ * R4 (0x04) - Audio Interface (1)
+ */
+#define WM8993_AIFADCL_SRC 0x8000 /* AIFADCL_SRC */
+#define WM8993_AIFADCL_SRC_MASK 0x8000 /* AIFADCL_SRC */
+#define WM8993_AIFADCL_SRC_SHIFT 15 /* AIFADCL_SRC */
+#define WM8993_AIFADCL_SRC_WIDTH 1 /* AIFADCL_SRC */
+#define WM8993_AIFADCR_SRC 0x4000 /* AIFADCR_SRC */
+#define WM8993_AIFADCR_SRC_MASK 0x4000 /* AIFADCR_SRC */
+#define WM8993_AIFADCR_SRC_SHIFT 14 /* AIFADCR_SRC */
+#define WM8993_AIFADCR_SRC_WIDTH 1 /* AIFADCR_SRC */
+#define WM8993_AIFADC_TDM 0x2000 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_MASK 0x2000 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_SHIFT 13 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_WIDTH 1 /* AIFADC_TDM */
+#define WM8993_AIFADC_TDM_CHAN 0x1000 /* AIFADC_TDM_CHAN */
+#define WM8993_AIFADC_TDM_CHAN_MASK 0x1000 /* AIFADC_TDM_CHAN */
+#define WM8993_AIFADC_TDM_CHAN_SHIFT 12 /* AIFADC_TDM_CHAN */
+#define WM8993_AIFADC_TDM_CHAN_WIDTH 1 /* AIFADC_TDM_CHAN */
+#define WM8993_BCLK_DIR 0x0200 /* BCLK_DIR */
+#define WM8993_BCLK_DIR_MASK 0x0200 /* BCLK_DIR */
+#define WM8993_BCLK_DIR_SHIFT 9 /* BCLK_DIR */
+#define WM8993_BCLK_DIR_WIDTH 1 /* BCLK_DIR */
+#define WM8993_AIF_BCLK_INV 0x0100 /* AIF_BCLK_INV */
+#define WM8993_AIF_BCLK_INV_MASK 0x0100 /* AIF_BCLK_INV */
+#define WM8993_AIF_BCLK_INV_SHIFT 8 /* AIF_BCLK_INV */
+#define WM8993_AIF_BCLK_INV_WIDTH 1 /* AIF_BCLK_INV */
+#define WM8993_AIF_LRCLK_INV 0x0080 /* AIF_LRCLK_INV */
+#define WM8993_AIF_LRCLK_INV_MASK 0x0080 /* AIF_LRCLK_INV */
+#define WM8993_AIF_LRCLK_INV_SHIFT 7 /* AIF_LRCLK_INV */
+#define WM8993_AIF_LRCLK_INV_WIDTH 1 /* AIF_LRCLK_INV */
+#define WM8993_AIF_WL_MASK 0x0060 /* AIF_WL - [6:5] */
+#define WM8993_AIF_WL_SHIFT 5 /* AIF_WL - [6:5] */
+#define WM8993_AIF_WL_WIDTH 2 /* AIF_WL - [6:5] */
+#define WM8993_AIF_FMT_MASK 0x0018 /* AIF_FMT - [4:3] */
+#define WM8993_AIF_FMT_SHIFT 3 /* AIF_FMT - [4:3] */
+#define WM8993_AIF_FMT_WIDTH 2 /* AIF_FMT - [4:3] */
+
+/*
+ * R5 (0x05) - Audio Interface (2)
+ */
+#define WM8993_AIFDACL_SRC 0x8000 /* AIFDACL_SRC */
+#define WM8993_AIFDACL_SRC_MASK 0x8000 /* AIFDACL_SRC */
+#define WM8993_AIFDACL_SRC_SHIFT 15 /* AIFDACL_SRC */
+#define WM8993_AIFDACL_SRC_WIDTH 1 /* AIFDACL_SRC */
+#define WM8993_AIFDACR_SRC 0x4000 /* AIFDACR_SRC */
+#define WM8993_AIFDACR_SRC_MASK 0x4000 /* AIFDACR_SRC */
+#define WM8993_AIFDACR_SRC_SHIFT 14 /* AIFDACR_SRC */
+#define WM8993_AIFDACR_SRC_WIDTH 1 /* AIFDACR_SRC */
+#define WM8993_AIFDAC_TDM 0x2000 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_MASK 0x2000 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_SHIFT 13 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_WIDTH 1 /* AIFDAC_TDM */
+#define WM8993_AIFDAC_TDM_CHAN 0x1000 /* AIFDAC_TDM_CHAN */
+#define WM8993_AIFDAC_TDM_CHAN_MASK 0x1000 /* AIFDAC_TDM_CHAN */
+#define WM8993_AIFDAC_TDM_CHAN_SHIFT 12 /* AIFDAC_TDM_CHAN */
+#define WM8993_AIFDAC_TDM_CHAN_WIDTH 1 /* AIFDAC_TDM_CHAN */
+#define WM8993_DAC_BOOST_MASK 0x0C00 /* DAC_BOOST - [11:10] */
+#define WM8993_DAC_BOOST_SHIFT 10 /* DAC_BOOST - [11:10] */
+#define WM8993_DAC_BOOST_WIDTH 2 /* DAC_BOOST - [11:10] */
+#define WM8993_DAC_COMP 0x0010 /* DAC_COMP */
+#define WM8993_DAC_COMP_MASK 0x0010 /* DAC_COMP */
+#define WM8993_DAC_COMP_SHIFT 4 /* DAC_COMP */
+#define WM8993_DAC_COMP_WIDTH 1 /* DAC_COMP */
+#define WM8993_DAC_COMPMODE 0x0008 /* DAC_COMPMODE */
+#define WM8993_DAC_COMPMODE_MASK 0x0008 /* DAC_COMPMODE */
+#define WM8993_DAC_COMPMODE_SHIFT 3 /* DAC_COMPMODE */
+#define WM8993_DAC_COMPMODE_WIDTH 1 /* DAC_COMPMODE */
+#define WM8993_ADC_COMP 0x0004 /* ADC_COMP */
+#define WM8993_ADC_COMP_MASK 0x0004 /* ADC_COMP */
+#define WM8993_ADC_COMP_SHIFT 2 /* ADC_COMP */
+#define WM8993_ADC_COMP_WIDTH 1 /* ADC_COMP */
+#define WM8993_ADC_COMPMODE 0x0002 /* ADC_COMPMODE */
+#define WM8993_ADC_COMPMODE_MASK 0x0002 /* ADC_COMPMODE */
+#define WM8993_ADC_COMPMODE_SHIFT 1 /* ADC_COMPMODE */
+#define WM8993_ADC_COMPMODE_WIDTH 1 /* ADC_COMPMODE */
+#define WM8993_LOOPBACK 0x0001 /* LOOPBACK */
+#define WM8993_LOOPBACK_MASK 0x0001 /* LOOPBACK */
+#define WM8993_LOOPBACK_SHIFT 0 /* LOOPBACK */
+#define WM8993_LOOPBACK_WIDTH 1 /* LOOPBACK */
+
+/*
+ * R6 (0x06) - Clocking 1
+ */
+#define WM8993_TOCLK_RATE 0x8000 /* TOCLK_RATE */
+#define WM8993_TOCLK_RATE_MASK 0x8000 /* TOCLK_RATE */
+#define WM8993_TOCLK_RATE_SHIFT 15 /* TOCLK_RATE */
+#define WM8993_TOCLK_RATE_WIDTH 1 /* TOCLK_RATE */
+#define WM8993_TOCLK_ENA 0x4000 /* TOCLK_ENA */
+#define WM8993_TOCLK_ENA_MASK 0x4000 /* TOCLK_ENA */
+#define WM8993_TOCLK_ENA_SHIFT 14 /* TOCLK_ENA */
+#define WM8993_TOCLK_ENA_WIDTH 1 /* TOCLK_ENA */
+#define WM8993_OPCLK_DIV_MASK 0x1E00 /* OPCLK_DIV - [12:9] */
+#define WM8993_OPCLK_DIV_SHIFT 9 /* OPCLK_DIV - [12:9] */
+#define WM8993_OPCLK_DIV_WIDTH 4 /* OPCLK_DIV - [12:9] */
+#define WM8993_DCLK_DIV_MASK 0x01C0 /* DCLK_DIV - [8:6] */
+#define WM8993_DCLK_DIV_SHIFT 6 /* DCLK_DIV - [8:6] */
+#define WM8993_DCLK_DIV_WIDTH 3 /* DCLK_DIV - [8:6] */
+#define WM8993_BCLK_DIV_MASK 0x001E /* BCLK_DIV - [4:1] */
+#define WM8993_BCLK_DIV_SHIFT 1 /* BCLK_DIV - [4:1] */
+#define WM8993_BCLK_DIV_WIDTH 4 /* BCLK_DIV - [4:1] */
+
+/*
+ * R7 (0x07) - Clocking 2
+ */
+#define WM8993_MCLK_SRC 0x8000 /* MCLK_SRC */
+#define WM8993_MCLK_SRC_MASK 0x8000 /* MCLK_SRC */
+#define WM8993_MCLK_SRC_SHIFT 15 /* MCLK_SRC */
+#define WM8993_MCLK_SRC_WIDTH 1 /* MCLK_SRC */
+#define WM8993_SYSCLK_SRC 0x4000 /* SYSCLK_SRC */
+#define WM8993_SYSCLK_SRC_MASK 0x4000 /* SYSCLK_SRC */
+#define WM8993_SYSCLK_SRC_SHIFT 14 /* SYSCLK_SRC */
+#define WM8993_SYSCLK_SRC_WIDTH 1 /* SYSCLK_SRC */
+#define WM8993_MCLK_DIV 0x1000 /* MCLK_DIV */
+#define WM8993_MCLK_DIV_MASK 0x1000 /* MCLK_DIV */
+#define WM8993_MCLK_DIV_SHIFT 12 /* MCLK_DIV */
+#define WM8993_MCLK_DIV_WIDTH 1 /* MCLK_DIV */
+#define WM8993_MCLK_INV 0x0400 /* MCLK_INV */
+#define WM8993_MCLK_INV_MASK 0x0400 /* MCLK_INV */
+#define WM8993_MCLK_INV_SHIFT 10 /* MCLK_INV */
+#define WM8993_MCLK_INV_WIDTH 1 /* MCLK_INV */
+#define WM8993_ADC_DIV_MASK 0x00E0 /* ADC_DIV - [7:5] */
+#define WM8993_ADC_DIV_SHIFT 5 /* ADC_DIV - [7:5] */
+#define WM8993_ADC_DIV_WIDTH 3 /* ADC_DIV - [7:5] */
+#define WM8993_DAC_DIV_MASK 0x001C /* DAC_DIV - [4:2] */
+#define WM8993_DAC_DIV_SHIFT 2 /* DAC_DIV - [4:2] */
+#define WM8993_DAC_DIV_WIDTH 3 /* DAC_DIV - [4:2] */
+
+/*
+ * R8 (0x08) - Audio Interface (3)
+ */
+#define WM8993_AIF_MSTR1 0x8000 /* AIF_MSTR1 */
+#define WM8993_AIF_MSTR1_MASK 0x8000 /* AIF_MSTR1 */
+#define WM8993_AIF_MSTR1_SHIFT 15 /* AIF_MSTR1 */
+#define WM8993_AIF_MSTR1_WIDTH 1 /* AIF_MSTR1 */
+
+/*
+ * R9 (0x09) - Audio Interface (4)
+ */
+#define WM8993_AIF_TRIS 0x2000 /* AIF_TRIS */
+#define WM8993_AIF_TRIS_MASK 0x2000 /* AIF_TRIS */
+#define WM8993_AIF_TRIS_SHIFT 13 /* AIF_TRIS */
+#define WM8993_AIF_TRIS_WIDTH 1 /* AIF_TRIS */
+#define WM8993_LRCLK_DIR 0x0800 /* LRCLK_DIR */
+#define WM8993_LRCLK_DIR_MASK 0x0800 /* LRCLK_DIR */
+#define WM8993_LRCLK_DIR_SHIFT 11 /* LRCLK_DIR */
+#define WM8993_LRCLK_DIR_WIDTH 1 /* LRCLK_DIR */
+#define WM8993_LRCLK_RATE_MASK 0x07FF /* LRCLK_RATE - [10:0] */
+#define WM8993_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [10:0] */
+#define WM8993_LRCLK_RATE_WIDTH 11 /* LRCLK_RATE - [10:0] */
+
+/*
+ * R10 (0x0A) - DAC CTRL
+ */
+#define WM8993_DAC_OSR128 0x2000 /* DAC_OSR128 */
+#define WM8993_DAC_OSR128_MASK 0x2000 /* DAC_OSR128 */
+#define WM8993_DAC_OSR128_SHIFT 13 /* DAC_OSR128 */
+#define WM8993_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */
+#define WM8993_DAC_MONO 0x0200 /* DAC_MONO */
+#define WM8993_DAC_MONO_MASK 0x0200 /* DAC_MONO */
+#define WM8993_DAC_MONO_SHIFT 9 /* DAC_MONO */
+#define WM8993_DAC_MONO_WIDTH 1 /* DAC_MONO */
+#define WM8993_DAC_SB_FILT 0x0100 /* DAC_SB_FILT */
+#define WM8993_DAC_SB_FILT_MASK 0x0100 /* DAC_SB_FILT */
+#define WM8993_DAC_SB_FILT_SHIFT 8 /* DAC_SB_FILT */
+#define WM8993_DAC_SB_FILT_WIDTH 1 /* DAC_SB_FILT */
+#define WM8993_DAC_MUTERATE 0x0080 /* DAC_MUTERATE */
+#define WM8993_DAC_MUTERATE_MASK 0x0080 /* DAC_MUTERATE */
+#define WM8993_DAC_MUTERATE_SHIFT 7 /* DAC_MUTERATE */
+#define WM8993_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */
+#define WM8993_DAC_UNMUTE_RAMP 0x0040 /* DAC_UNMUTE_RAMP */
+#define WM8993_DAC_UNMUTE_RAMP_MASK 0x0040 /* DAC_UNMUTE_RAMP */
+#define WM8993_DAC_UNMUTE_RAMP_SHIFT 6 /* DAC_UNMUTE_RAMP */
+#define WM8993_DAC_UNMUTE_RAMP_WIDTH 1 /* DAC_UNMUTE_RAMP */
+#define WM8993_DEEMPH_MASK 0x0030 /* DEEMPH - [5:4] */
+#define WM8993_DEEMPH_SHIFT 4 /* DEEMPH - [5:4] */
+#define WM8993_DEEMPH_WIDTH 2 /* DEEMPH - [5:4] */
+#define WM8993_DAC_MUTE 0x0004 /* DAC_MUTE */
+#define WM8993_DAC_MUTE_MASK 0x0004 /* DAC_MUTE */
+#define WM8993_DAC_MUTE_SHIFT 2 /* DAC_MUTE */
+#define WM8993_DAC_MUTE_WIDTH 1 /* DAC_MUTE */
+#define WM8993_DACL_DATINV 0x0002 /* DACL_DATINV */
+#define WM8993_DACL_DATINV_MASK 0x0002 /* DACL_DATINV */
+#define WM8993_DACL_DATINV_SHIFT 1 /* DACL_DATINV */
+#define WM8993_DACL_DATINV_WIDTH 1 /* DACL_DATINV */
+#define WM8993_DACR_DATINV 0x0001 /* DACR_DATINV */
+#define WM8993_DACR_DATINV_MASK 0x0001 /* DACR_DATINV */
+#define WM8993_DACR_DATINV_SHIFT 0 /* DACR_DATINV */
+#define WM8993_DACR_DATINV_WIDTH 1 /* DACR_DATINV */
+
+/*
+ * R11 (0x0B) - Left DAC Digital Volume
+ */
+#define WM8993_DAC_VU 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_MASK 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_SHIFT 8 /* DAC_VU */
+#define WM8993_DAC_VU_WIDTH 1 /* DAC_VU */
+#define WM8993_DACL_VOL_MASK 0x00FF /* DACL_VOL - [7:0] */
+#define WM8993_DACL_VOL_SHIFT 0 /* DACL_VOL - [7:0] */
+#define WM8993_DACL_VOL_WIDTH 8 /* DACL_VOL - [7:0] */
+
+/*
+ * R12 (0x0C) - Right DAC Digital Volume
+ */
+#define WM8993_DAC_VU 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_MASK 0x0100 /* DAC_VU */
+#define WM8993_DAC_VU_SHIFT 8 /* DAC_VU */
+#define WM8993_DAC_VU_WIDTH 1 /* DAC_VU */
+#define WM8993_DACR_VOL_MASK 0x00FF /* DACR_VOL - [7:0] */
+#define WM8993_DACR_VOL_SHIFT 0 /* DACR_VOL - [7:0] */
+#define WM8993_DACR_VOL_WIDTH 8 /* DACR_VOL - [7:0] */
+
+/*
+ * R13 (0x0D) - Digital Side Tone
+ */
+#define WM8993_ADCL_DAC_SVOL_MASK 0x1E00 /* ADCL_DAC_SVOL - [12:9] */
+#define WM8993_ADCL_DAC_SVOL_SHIFT 9 /* ADCL_DAC_SVOL - [12:9] */
+#define WM8993_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [12:9] */
+#define WM8993_ADCR_DAC_SVOL_MASK 0x01E0 /* ADCR_DAC_SVOL - [8:5] */
+#define WM8993_ADCR_DAC_SVOL_SHIFT 5 /* ADCR_DAC_SVOL - [8:5] */
+#define WM8993_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [8:5] */
+#define WM8993_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */
+#define WM8993_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */
+#define WM8993_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */
+#define WM8993_ADC_TO_DACR_MASK 0x0003 /* ADC_TO_DACR - [1:0] */
+#define WM8993_ADC_TO_DACR_SHIFT 0 /* ADC_TO_DACR - [1:0] */
+#define WM8993_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [1:0] */
+
+/*
+ * R14 (0x0E) - ADC CTRL
+ */
+#define WM8993_ADC_OSR128 0x0200 /* ADC_OSR128 */
+#define WM8993_ADC_OSR128_MASK 0x0200 /* ADC_OSR128 */
+#define WM8993_ADC_OSR128_SHIFT 9 /* ADC_OSR128 */
+#define WM8993_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */
+#define WM8993_ADC_HPF 0x0100 /* ADC_HPF */
+#define WM8993_ADC_HPF_MASK 0x0100 /* ADC_HPF */
+#define WM8993_ADC_HPF_SHIFT 8 /* ADC_HPF */
+#define WM8993_ADC_HPF_WIDTH 1 /* ADC_HPF */
+#define WM8993_ADC_HPF_CUT_MASK 0x0060 /* ADC_HPF_CUT - [6:5] */
+#define WM8993_ADC_HPF_CUT_SHIFT 5 /* ADC_HPF_CUT - [6:5] */
+#define WM8993_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [6:5] */
+#define WM8993_ADCL_DATINV 0x0002 /* ADCL_DATINV */
+#define WM8993_ADCL_DATINV_MASK 0x0002 /* ADCL_DATINV */
+#define WM8993_ADCL_DATINV_SHIFT 1 /* ADCL_DATINV */
+#define WM8993_ADCL_DATINV_WIDTH 1 /* ADCL_DATINV */
+#define WM8993_ADCR_DATINV 0x0001 /* ADCR_DATINV */
+#define WM8993_ADCR_DATINV_MASK 0x0001 /* ADCR_DATINV */
+#define WM8993_ADCR_DATINV_SHIFT 0 /* ADCR_DATINV */
+#define WM8993_ADCR_DATINV_WIDTH 1 /* ADCR_DATINV */
+
+/*
+ * R15 (0x0F) - Left ADC Digital Volume
+ */
+#define WM8993_ADC_VU 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_MASK 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_SHIFT 8 /* ADC_VU */
+#define WM8993_ADC_VU_WIDTH 1 /* ADC_VU */
+#define WM8993_ADCL_VOL_MASK 0x00FF /* ADCL_VOL - [7:0] */
+#define WM8993_ADCL_VOL_SHIFT 0 /* ADCL_VOL - [7:0] */
+#define WM8993_ADCL_VOL_WIDTH 8 /* ADCL_VOL - [7:0] */
+
+/*
+ * R16 (0x10) - Right ADC Digital Volume
+ */
+#define WM8993_ADC_VU 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_MASK 0x0100 /* ADC_VU */
+#define WM8993_ADC_VU_SHIFT 8 /* ADC_VU */
+#define WM8993_ADC_VU_WIDTH 1 /* ADC_VU */
+#define WM8993_ADCR_VOL_MASK 0x00FF /* ADCR_VOL - [7:0] */
+#define WM8993_ADCR_VOL_SHIFT 0 /* ADCR_VOL - [7:0] */
+#define WM8993_ADCR_VOL_WIDTH 8 /* ADCR_VOL - [7:0] */
+
+/*
+ * R18 (0x12) - GPIO CTRL 1
+ */
+#define WM8993_JD2_SC_EINT 0x8000 /* JD2_SC_EINT */
+#define WM8993_JD2_SC_EINT_MASK 0x8000 /* JD2_SC_EINT */
+#define WM8993_JD2_SC_EINT_SHIFT 15 /* JD2_SC_EINT */
+#define WM8993_JD2_SC_EINT_WIDTH 1 /* JD2_SC_EINT */
+#define WM8993_JD2_EINT 0x4000 /* JD2_EINT */
+#define WM8993_JD2_EINT_MASK 0x4000 /* JD2_EINT */
+#define WM8993_JD2_EINT_SHIFT 14 /* JD2_EINT */
+#define WM8993_JD2_EINT_WIDTH 1 /* JD2_EINT */
+#define WM8993_WSEQ_EINT 0x2000 /* WSEQ_EINT */
+#define WM8993_WSEQ_EINT_MASK 0x2000 /* WSEQ_EINT */
+#define WM8993_WSEQ_EINT_SHIFT 13 /* WSEQ_EINT */
+#define WM8993_WSEQ_EINT_WIDTH 1 /* WSEQ_EINT */
+#define WM8993_IRQ 0x1000 /* IRQ */
+#define WM8993_IRQ_MASK 0x1000 /* IRQ */
+#define WM8993_IRQ_SHIFT 12 /* IRQ */
+#define WM8993_IRQ_WIDTH 1 /* IRQ */
+#define WM8993_TEMPOK_EINT 0x0800 /* TEMPOK_EINT */
+#define WM8993_TEMPOK_EINT_MASK 0x0800 /* TEMPOK_EINT */
+#define WM8993_TEMPOK_EINT_SHIFT 11 /* TEMPOK_EINT */
+#define WM8993_TEMPOK_EINT_WIDTH 1 /* TEMPOK_EINT */
+#define WM8993_JD1_SC_EINT 0x0400 /* JD1_SC_EINT */
+#define WM8993_JD1_SC_EINT_MASK 0x0400 /* JD1_SC_EINT */
+#define WM8993_JD1_SC_EINT_SHIFT 10 /* JD1_SC_EINT */
+#define WM8993_JD1_SC_EINT_WIDTH 1 /* JD1_SC_EINT */
+#define WM8993_JD1_EINT 0x0200 /* JD1_EINT */
+#define WM8993_JD1_EINT_MASK 0x0200 /* JD1_EINT */
+#define WM8993_JD1_EINT_SHIFT 9 /* JD1_EINT */
+#define WM8993_JD1_EINT_WIDTH 1 /* JD1_EINT */
+#define WM8993_FLL_LOCK_EINT 0x0100 /* FLL_LOCK_EINT */
+#define WM8993_FLL_LOCK_EINT_MASK 0x0100 /* FLL_LOCK_EINT */
+#define WM8993_FLL_LOCK_EINT_SHIFT 8 /* FLL_LOCK_EINT */
+#define WM8993_FLL_LOCK_EINT_WIDTH 1 /* FLL_LOCK_EINT */
+#define WM8993_GPI8_EINT 0x0080 /* GPI8_EINT */
+#define WM8993_GPI8_EINT_MASK 0x0080 /* GPI8_EINT */
+#define WM8993_GPI8_EINT_SHIFT 7 /* GPI8_EINT */
+#define WM8993_GPI8_EINT_WIDTH 1 /* GPI8_EINT */
+#define WM8993_GPI7_EINT 0x0040 /* GPI7_EINT */
+#define WM8993_GPI7_EINT_MASK 0x0040 /* GPI7_EINT */
+#define WM8993_GPI7_EINT_SHIFT 6 /* GPI7_EINT */
+#define WM8993_GPI7_EINT_WIDTH 1 /* GPI7_EINT */
+#define WM8993_GPIO1_EINT 0x0001 /* GPIO1_EINT */
+#define WM8993_GPIO1_EINT_MASK 0x0001 /* GPIO1_EINT */
+#define WM8993_GPIO1_EINT_SHIFT 0 /* GPIO1_EINT */
+#define WM8993_GPIO1_EINT_WIDTH 1 /* GPIO1_EINT */
+
+/*
+ * R19 (0x13) - GPIO1
+ */
+#define WM8993_GPIO1_PU 0x0020 /* GPIO1_PU */
+#define WM8993_GPIO1_PU_MASK 0x0020 /* GPIO1_PU */
+#define WM8993_GPIO1_PU_SHIFT 5 /* GPIO1_PU */
+#define WM8993_GPIO1_PU_WIDTH 1 /* GPIO1_PU */
+#define WM8993_GPIO1_PD 0x0010 /* GPIO1_PD */
+#define WM8993_GPIO1_PD_MASK 0x0010 /* GPIO1_PD */
+#define WM8993_GPIO1_PD_SHIFT 4 /* GPIO1_PD */
+#define WM8993_GPIO1_PD_WIDTH 1 /* GPIO1_PD */
+#define WM8993_GPIO1_SEL_MASK 0x000F /* GPIO1_SEL - [3:0] */
+#define WM8993_GPIO1_SEL_SHIFT 0 /* GPIO1_SEL - [3:0] */
+#define WM8993_GPIO1_SEL_WIDTH 4 /* GPIO1_SEL - [3:0] */
+
+/*
+ * R20 (0x14) - IRQ_DEBOUNCE
+ */
+#define WM8993_JD2_SC_DB 0x8000 /* JD2_SC_DB */
+#define WM8993_JD2_SC_DB_MASK 0x8000 /* JD2_SC_DB */
+#define WM8993_JD2_SC_DB_SHIFT 15 /* JD2_SC_DB */
+#define WM8993_JD2_SC_DB_WIDTH 1 /* JD2_SC_DB */
+#define WM8993_JD2_DB 0x4000 /* JD2_DB */
+#define WM8993_JD2_DB_MASK 0x4000 /* JD2_DB */
+#define WM8993_JD2_DB_SHIFT 14 /* JD2_DB */
+#define WM8993_JD2_DB_WIDTH 1 /* JD2_DB */
+#define WM8993_WSEQ_DB 0x2000 /* WSEQ_DB */
+#define WM8993_WSEQ_DB_MASK 0x2000 /* WSEQ_DB */
+#define WM8993_WSEQ_DB_SHIFT 13 /* WSEQ_DB */
+#define WM8993_WSEQ_DB_WIDTH 1 /* WSEQ_DB */
+#define WM8993_TEMPOK_DB 0x0800 /* TEMPOK_DB */
+#define WM8993_TEMPOK_DB_MASK 0x0800 /* TEMPOK_DB */
+#define WM8993_TEMPOK_DB_SHIFT 11 /* TEMPOK_DB */
+#define WM8993_TEMPOK_DB_WIDTH 1 /* TEMPOK_DB */
+#define WM8993_JD1_SC_DB 0x0400 /* JD1_SC_DB */
+#define WM8993_JD1_SC_DB_MASK 0x0400 /* JD1_SC_DB */
+#define WM8993_JD1_SC_DB_SHIFT 10 /* JD1_SC_DB */
+#define WM8993_JD1_SC_DB_WIDTH 1 /* JD1_SC_DB */
+#define WM8993_JD1_DB 0x0200 /* JD1_DB */
+#define WM8993_JD1_DB_MASK 0x0200 /* JD1_DB */
+#define WM8993_JD1_DB_SHIFT 9 /* JD1_DB */
+#define WM8993_JD1_DB_WIDTH 1 /* JD1_DB */
+#define WM8993_FLL_LOCK_DB 0x0100 /* FLL_LOCK_DB */
+#define WM8993_FLL_LOCK_DB_MASK 0x0100 /* FLL_LOCK_DB */
+#define WM8993_FLL_LOCK_DB_SHIFT 8 /* FLL_LOCK_DB */
+#define WM8993_FLL_LOCK_DB_WIDTH 1 /* FLL_LOCK_DB */
+#define WM8993_GPI8_DB 0x0080 /* GPI8_DB */
+#define WM8993_GPI8_DB_MASK 0x0080 /* GPI8_DB */
+#define WM8993_GPI8_DB_SHIFT 7 /* GPI8_DB */
+#define WM8993_GPI8_DB_WIDTH 1 /* GPI8_DB */
+#define WM8993_GPI7_DB 0x0008 /* GPI7_DB */
+#define WM8993_GPI7_DB_MASK 0x0008 /* GPI7_DB */
+#define WM8993_GPI7_DB_SHIFT 3 /* GPI7_DB */
+#define WM8993_GPI7_DB_WIDTH 1 /* GPI7_DB */
+#define WM8993_GPIO1_DB 0x0001 /* GPIO1_DB */
+#define WM8993_GPIO1_DB_MASK 0x0001 /* GPIO1_DB */
+#define WM8993_GPIO1_DB_SHIFT 0 /* GPIO1_DB */
+#define WM8993_GPIO1_DB_WIDTH 1 /* GPIO1_DB */
+
+/*
+ * R22 (0x16) - GPIOCTRL 2
+ */
+#define WM8993_IM_JD2_EINT 0x2000 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_EINT_MASK 0x2000 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_EINT_SHIFT 13 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_EINT_WIDTH 1 /* IM_JD2_EINT */
+#define WM8993_IM_JD2_SC_EINT 0x1000 /* IM_JD2_SC_EINT */
+#define WM8993_IM_JD2_SC_EINT_MASK 0x1000 /* IM_JD2_SC_EINT */
+#define WM8993_IM_JD2_SC_EINT_SHIFT 12 /* IM_JD2_SC_EINT */
+#define WM8993_IM_JD2_SC_EINT_WIDTH 1 /* IM_JD2_SC_EINT */
+#define WM8993_IM_TEMPOK_EINT 0x0800 /* IM_TEMPOK_EINT */
+#define WM8993_IM_TEMPOK_EINT_MASK 0x0800 /* IM_TEMPOK_EINT */
+#define WM8993_IM_TEMPOK_EINT_SHIFT 11 /* IM_TEMPOK_EINT */
+#define WM8993_IM_TEMPOK_EINT_WIDTH 1 /* IM_TEMPOK_EINT */
+#define WM8993_IM_JD1_SC_EINT 0x0400 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_SC_EINT_MASK 0x0400 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_SC_EINT_SHIFT 10 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_SC_EINT_WIDTH 1 /* IM_JD1_SC_EINT */
+#define WM8993_IM_JD1_EINT 0x0200 /* IM_JD1_EINT */
+#define WM8993_IM_JD1_EINT_MASK 0x0200 /* IM_JD1_EINT */
+#define WM8993_IM_JD1_EINT_SHIFT 9 /* IM_JD1_EINT */
+#define WM8993_IM_JD1_EINT_WIDTH 1 /* IM_JD1_EINT */
+#define WM8993_IM_FLL_LOCK_EINT 0x0100 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_FLL_LOCK_EINT_MASK 0x0100 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_FLL_LOCK_EINT_SHIFT 8 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_FLL_LOCK_EINT_WIDTH 1 /* IM_FLL_LOCK_EINT */
+#define WM8993_IM_GPI8_EINT 0x0040 /* IM_GPI8_EINT */
+#define WM8993_IM_GPI8_EINT_MASK 0x0040 /* IM_GPI8_EINT */
+#define WM8993_IM_GPI8_EINT_SHIFT 6 /* IM_GPI8_EINT */
+#define WM8993_IM_GPI8_EINT_WIDTH 1 /* IM_GPI8_EINT */
+#define WM8993_IM_GPIO1_EINT 0x0020 /* IM_GPIO1_EINT */
+#define WM8993_IM_GPIO1_EINT_MASK 0x0020 /* IM_GPIO1_EINT */
+#define WM8993_IM_GPIO1_EINT_SHIFT 5 /* IM_GPIO1_EINT */
+#define WM8993_IM_GPIO1_EINT_WIDTH 1 /* IM_GPIO1_EINT */
+#define WM8993_GPI8_ENA 0x0010 /* GPI8_ENA */
+#define WM8993_GPI8_ENA_MASK 0x0010 /* GPI8_ENA */
+#define WM8993_GPI8_ENA_SHIFT 4 /* GPI8_ENA */
+#define WM8993_GPI8_ENA_WIDTH 1 /* GPI8_ENA */
+#define WM8993_IM_GPI7_EINT 0x0004 /* IM_GPI7_EINT */
+#define WM8993_IM_GPI7_EINT_MASK 0x0004 /* IM_GPI7_EINT */
+#define WM8993_IM_GPI7_EINT_SHIFT 2 /* IM_GPI7_EINT */
+#define WM8993_IM_GPI7_EINT_WIDTH 1 /* IM_GPI7_EINT */
+#define WM8993_IM_WSEQ_EINT 0x0002 /* IM_WSEQ_EINT */
+#define WM8993_IM_WSEQ_EINT_MASK 0x0002 /* IM_WSEQ_EINT */
+#define WM8993_IM_WSEQ_EINT_SHIFT 1 /* IM_WSEQ_EINT */
+#define WM8993_IM_WSEQ_EINT_WIDTH 1 /* IM_WSEQ_EINT */
+#define WM8993_GPI7_ENA 0x0001 /* GPI7_ENA */
+#define WM8993_GPI7_ENA_MASK 0x0001 /* GPI7_ENA */
+#define WM8993_GPI7_ENA_SHIFT 0 /* GPI7_ENA */
+#define WM8993_GPI7_ENA_WIDTH 1 /* GPI7_ENA */
+
+/*
+ * R23 (0x17) - GPIO_POL
+ */
+#define WM8993_JD2_SC_POL 0x8000 /* JD2_SC_POL */
+#define WM8993_JD2_SC_POL_MASK 0x8000 /* JD2_SC_POL */
+#define WM8993_JD2_SC_POL_SHIFT 15 /* JD2_SC_POL */
+#define WM8993_JD2_SC_POL_WIDTH 1 /* JD2_SC_POL */
+#define WM8993_JD2_POL 0x4000 /* JD2_POL */
+#define WM8993_JD2_POL_MASK 0x4000 /* JD2_POL */
+#define WM8993_JD2_POL_SHIFT 14 /* JD2_POL */
+#define WM8993_JD2_POL_WIDTH 1 /* JD2_POL */
+#define WM8993_WSEQ_POL 0x2000 /* WSEQ_POL */
+#define WM8993_WSEQ_POL_MASK 0x2000 /* WSEQ_POL */
+#define WM8993_WSEQ_POL_SHIFT 13 /* WSEQ_POL */
+#define WM8993_WSEQ_POL_WIDTH 1 /* WSEQ_POL */
+#define WM8993_IRQ_POL 0x1000 /* IRQ_POL */
+#define WM8993_IRQ_POL_MASK 0x1000 /* IRQ_POL */
+#define WM8993_IRQ_POL_SHIFT 12 /* IRQ_POL */
+#define WM8993_IRQ_POL_WIDTH 1 /* IRQ_POL */
+#define WM8993_TEMPOK_POL 0x0800 /* TEMPOK_POL */
+#define WM8993_TEMPOK_POL_MASK 0x0800 /* TEMPOK_POL */
+#define WM8993_TEMPOK_POL_SHIFT 11 /* TEMPOK_POL */
+#define WM8993_TEMPOK_POL_WIDTH 1 /* TEMPOK_POL */
+#define WM8993_JD1_SC_POL 0x0400 /* JD1_SC_POL */
+#define WM8993_JD1_SC_POL_MASK 0x0400 /* JD1_SC_POL */
+#define WM8993_JD1_SC_POL_SHIFT 10 /* JD1_SC_POL */
+#define WM8993_JD1_SC_POL_WIDTH 1 /* JD1_SC_POL */
+#define WM8993_JD1_POL 0x0200 /* JD1_POL */
+#define WM8993_JD1_POL_MASK 0x0200 /* JD1_POL */
+#define WM8993_JD1_POL_SHIFT 9 /* JD1_POL */
+#define WM8993_JD1_POL_WIDTH 1 /* JD1_POL */
+#define WM8993_FLL_LOCK_POL 0x0100 /* FLL_LOCK_POL */
+#define WM8993_FLL_LOCK_POL_MASK 0x0100 /* FLL_LOCK_POL */
+#define WM8993_FLL_LOCK_POL_SHIFT 8 /* FLL_LOCK_POL */
+#define WM8993_FLL_LOCK_POL_WIDTH 1 /* FLL_LOCK_POL */
+#define WM8993_GPI8_POL 0x0080 /* GPI8_POL */
+#define WM8993_GPI8_POL_MASK 0x0080 /* GPI8_POL */
+#define WM8993_GPI8_POL_SHIFT 7 /* GPI8_POL */
+#define WM8993_GPI8_POL_WIDTH 1 /* GPI8_POL */
+#define WM8993_GPI7_POL 0x0040 /* GPI7_POL */
+#define WM8993_GPI7_POL_MASK 0x0040 /* GPI7_POL */
+#define WM8993_GPI7_POL_SHIFT 6 /* GPI7_POL */
+#define WM8993_GPI7_POL_WIDTH 1 /* GPI7_POL */
+#define WM8993_GPIO1_POL 0x0001 /* GPIO1_POL */
+#define WM8993_GPIO1_POL_MASK 0x0001 /* GPIO1_POL */
+#define WM8993_GPIO1_POL_SHIFT 0 /* GPIO1_POL */
+#define WM8993_GPIO1_POL_WIDTH 1 /* GPIO1_POL */
+
+/*
+ * R24 (0x18) - Left Line Input 1&2 Volume
+ */
+#define WM8993_IN1_VU 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_MASK 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_SHIFT 8 /* IN1_VU */
+#define WM8993_IN1_VU_WIDTH 1 /* IN1_VU */
+#define WM8993_IN1L_MUTE 0x0080 /* IN1L_MUTE */
+#define WM8993_IN1L_MUTE_MASK 0x0080 /* IN1L_MUTE */
+#define WM8993_IN1L_MUTE_SHIFT 7 /* IN1L_MUTE */
+#define WM8993_IN1L_MUTE_WIDTH 1 /* IN1L_MUTE */
+#define WM8993_IN1L_ZC 0x0040 /* IN1L_ZC */
+#define WM8993_IN1L_ZC_MASK 0x0040 /* IN1L_ZC */
+#define WM8993_IN1L_ZC_SHIFT 6 /* IN1L_ZC */
+#define WM8993_IN1L_ZC_WIDTH 1 /* IN1L_ZC */
+#define WM8993_IN1L_VOL_MASK 0x001F /* IN1L_VOL - [4:0] */
+#define WM8993_IN1L_VOL_SHIFT 0 /* IN1L_VOL - [4:0] */
+#define WM8993_IN1L_VOL_WIDTH 5 /* IN1L_VOL - [4:0] */
+
+/*
+ * R25 (0x19) - Left Line Input 3&4 Volume
+ */
+#define WM8993_IN2_VU 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_MASK 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_SHIFT 8 /* IN2_VU */
+#define WM8993_IN2_VU_WIDTH 1 /* IN2_VU */
+#define WM8993_IN2L_MUTE 0x0080 /* IN2L_MUTE */
+#define WM8993_IN2L_MUTE_MASK 0x0080 /* IN2L_MUTE */
+#define WM8993_IN2L_MUTE_SHIFT 7 /* IN2L_MUTE */
+#define WM8993_IN2L_MUTE_WIDTH 1 /* IN2L_MUTE */
+#define WM8993_IN2L_ZC 0x0040 /* IN2L_ZC */
+#define WM8993_IN2L_ZC_MASK 0x0040 /* IN2L_ZC */
+#define WM8993_IN2L_ZC_SHIFT 6 /* IN2L_ZC */
+#define WM8993_IN2L_ZC_WIDTH 1 /* IN2L_ZC */
+#define WM8993_IN2L_VOL_MASK 0x001F /* IN2L_VOL - [4:0] */
+#define WM8993_IN2L_VOL_SHIFT 0 /* IN2L_VOL - [4:0] */
+#define WM8993_IN2L_VOL_WIDTH 5 /* IN2L_VOL - [4:0] */
+
+/*
+ * R26 (0x1A) - Right Line Input 1&2 Volume
+ */
+#define WM8993_IN1_VU 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_MASK 0x0100 /* IN1_VU */
+#define WM8993_IN1_VU_SHIFT 8 /* IN1_VU */
+#define WM8993_IN1_VU_WIDTH 1 /* IN1_VU */
+#define WM8993_IN1R_MUTE 0x0080 /* IN1R_MUTE */
+#define WM8993_IN1R_MUTE_MASK 0x0080 /* IN1R_MUTE */
+#define WM8993_IN1R_MUTE_SHIFT 7 /* IN1R_MUTE */
+#define WM8993_IN1R_MUTE_WIDTH 1 /* IN1R_MUTE */
+#define WM8993_IN1R_ZC 0x0040 /* IN1R_ZC */
+#define WM8993_IN1R_ZC_MASK 0x0040 /* IN1R_ZC */
+#define WM8993_IN1R_ZC_SHIFT 6 /* IN1R_ZC */
+#define WM8993_IN1R_ZC_WIDTH 1 /* IN1R_ZC */
+#define WM8993_IN1R_VOL_MASK 0x001F /* IN1R_VOL - [4:0] */
+#define WM8993_IN1R_VOL_SHIFT 0 /* IN1R_VOL - [4:0] */
+#define WM8993_IN1R_VOL_WIDTH 5 /* IN1R_VOL - [4:0] */
+
+/*
+ * R27 (0x1B) - Right Line Input 3&4 Volume
+ */
+#define WM8993_IN2_VU 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_MASK 0x0100 /* IN2_VU */
+#define WM8993_IN2_VU_SHIFT 8 /* IN2_VU */
+#define WM8993_IN2_VU_WIDTH 1 /* IN2_VU */
+#define WM8993_IN2R_MUTE 0x0080 /* IN2R_MUTE */
+#define WM8993_IN2R_MUTE_MASK 0x0080 /* IN2R_MUTE */
+#define WM8993_IN2R_MUTE_SHIFT 7 /* IN2R_MUTE */
+#define WM8993_IN2R_MUTE_WIDTH 1 /* IN2R_MUTE */
+#define WM8993_IN2R_ZC 0x0040 /* IN2R_ZC */
+#define WM8993_IN2R_ZC_MASK 0x0040 /* IN2R_ZC */
+#define WM8993_IN2R_ZC_SHIFT 6 /* IN2R_ZC */
+#define WM8993_IN2R_ZC_WIDTH 1 /* IN2R_ZC */
+#define WM8993_IN2R_VOL_MASK 0x001F /* IN2R_VOL - [4:0] */
+#define WM8993_IN2R_VOL_SHIFT 0 /* IN2R_VOL - [4:0] */
+#define WM8993_IN2R_VOL_WIDTH 5 /* IN2R_VOL - [4:0] */
+
+/*
+ * R28 (0x1C) - Left Output Volume
+ */
+#define WM8993_HPOUT1_VU 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_MASK 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_SHIFT 8 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_WIDTH 1 /* HPOUT1_VU */
+#define WM8993_HPOUT1L_ZC 0x0080 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_ZC_MASK 0x0080 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_ZC_SHIFT 7 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_ZC_WIDTH 1 /* HPOUT1L_ZC */
+#define WM8993_HPOUT1L_MUTE_N 0x0040 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_MUTE_N_MASK 0x0040 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_MUTE_N_SHIFT 6 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_MUTE_N_WIDTH 1 /* HPOUT1L_MUTE_N */
+#define WM8993_HPOUT1L_VOL_MASK 0x003F /* HPOUT1L_VOL - [5:0] */
+#define WM8993_HPOUT1L_VOL_SHIFT 0 /* HPOUT1L_VOL - [5:0] */
+#define WM8993_HPOUT1L_VOL_WIDTH 6 /* HPOUT1L_VOL - [5:0] */
+
+/*
+ * R29 (0x1D) - Right Output Volume
+ */
+#define WM8993_HPOUT1_VU 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_MASK 0x0100 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_SHIFT 8 /* HPOUT1_VU */
+#define WM8993_HPOUT1_VU_WIDTH 1 /* HPOUT1_VU */
+#define WM8993_HPOUT1R_ZC 0x0080 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_ZC_MASK 0x0080 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_ZC_SHIFT 7 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_ZC_WIDTH 1 /* HPOUT1R_ZC */
+#define WM8993_HPOUT1R_MUTE_N 0x0040 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_MUTE_N_MASK 0x0040 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_MUTE_N_SHIFT 6 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_MUTE_N_WIDTH 1 /* HPOUT1R_MUTE_N */
+#define WM8993_HPOUT1R_VOL_MASK 0x003F /* HPOUT1R_VOL - [5:0] */
+#define WM8993_HPOUT1R_VOL_SHIFT 0 /* HPOUT1R_VOL - [5:0] */
+#define WM8993_HPOUT1R_VOL_WIDTH 6 /* HPOUT1R_VOL - [5:0] */
+
+/*
+ * R30 (0x1E) - Line Outputs Volume
+ */
+#define WM8993_LINEOUT1N_MUTE 0x0040 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1N_MUTE_MASK 0x0040 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1N_MUTE_SHIFT 6 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1N_MUTE_WIDTH 1 /* LINEOUT1N_MUTE */
+#define WM8993_LINEOUT1P_MUTE 0x0020 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1P_MUTE_MASK 0x0020 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1P_MUTE_SHIFT 5 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1P_MUTE_WIDTH 1 /* LINEOUT1P_MUTE */
+#define WM8993_LINEOUT1_VOL 0x0010 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT1_VOL_MASK 0x0010 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT1_VOL_SHIFT 4 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT1_VOL_WIDTH 1 /* LINEOUT1_VOL */
+#define WM8993_LINEOUT2N_MUTE 0x0004 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2N_MUTE_MASK 0x0004 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2N_MUTE_SHIFT 2 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2N_MUTE_WIDTH 1 /* LINEOUT2N_MUTE */
+#define WM8993_LINEOUT2P_MUTE 0x0002 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2P_MUTE_MASK 0x0002 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2P_MUTE_SHIFT 1 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2P_MUTE_WIDTH 1 /* LINEOUT2P_MUTE */
+#define WM8993_LINEOUT2_VOL 0x0001 /* LINEOUT2_VOL */
+#define WM8993_LINEOUT2_VOL_MASK 0x0001 /* LINEOUT2_VOL */
+#define WM8993_LINEOUT2_VOL_SHIFT 0 /* LINEOUT2_VOL */
+#define WM8993_LINEOUT2_VOL_WIDTH 1 /* LINEOUT2_VOL */
+
+/*
+ * R31 (0x1F) - HPOUT2 Volume
+ */
+#define WM8993_HPOUT2_MUTE 0x0020 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_MUTE_MASK 0x0020 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_MUTE_SHIFT 5 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_MUTE_WIDTH 1 /* HPOUT2_MUTE */
+#define WM8993_HPOUT2_VOL 0x0010 /* HPOUT2_VOL */
+#define WM8993_HPOUT2_VOL_MASK 0x0010 /* HPOUT2_VOL */
+#define WM8993_HPOUT2_VOL_SHIFT 4 /* HPOUT2_VOL */
+#define WM8993_HPOUT2_VOL_WIDTH 1 /* HPOUT2_VOL */
+
+/*
+ * R32 (0x20) - Left OPGA Volume
+ */
+#define WM8993_MIXOUT_VU 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_MASK 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_SHIFT 8 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_WIDTH 1 /* MIXOUT_VU */
+#define WM8993_MIXOUTL_ZC 0x0080 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_ZC_MASK 0x0080 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_ZC_SHIFT 7 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_ZC_WIDTH 1 /* MIXOUTL_ZC */
+#define WM8993_MIXOUTL_MUTE_N 0x0040 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_MUTE_N_MASK 0x0040 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_MUTE_N_SHIFT 6 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_MUTE_N_WIDTH 1 /* MIXOUTL_MUTE_N */
+#define WM8993_MIXOUTL_VOL_MASK 0x003F /* MIXOUTL_VOL - [5:0] */
+#define WM8993_MIXOUTL_VOL_SHIFT 0 /* MIXOUTL_VOL - [5:0] */
+#define WM8993_MIXOUTL_VOL_WIDTH 6 /* MIXOUTL_VOL - [5:0] */
+
+/*
+ * R33 (0x21) - Right OPGA Volume
+ */
+#define WM8993_MIXOUT_VU 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_MASK 0x0100 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_SHIFT 8 /* MIXOUT_VU */
+#define WM8993_MIXOUT_VU_WIDTH 1 /* MIXOUT_VU */
+#define WM8993_MIXOUTR_ZC 0x0080 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_ZC_MASK 0x0080 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_ZC_SHIFT 7 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_ZC_WIDTH 1 /* MIXOUTR_ZC */
+#define WM8993_MIXOUTR_MUTE_N 0x0040 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_MUTE_N_MASK 0x0040 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_MUTE_N_SHIFT 6 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_MUTE_N_WIDTH 1 /* MIXOUTR_MUTE_N */
+#define WM8993_MIXOUTR_VOL_MASK 0x003F /* MIXOUTR_VOL - [5:0] */
+#define WM8993_MIXOUTR_VOL_SHIFT 0 /* MIXOUTR_VOL - [5:0] */
+#define WM8993_MIXOUTR_VOL_WIDTH 6 /* MIXOUTR_VOL - [5:0] */
+
+/*
+ * R34 (0x22) - SPKMIXL Attenuation
+ */
+#define WM8993_MIXINL_SPKMIXL_VOL 0x0020 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_MIXINL_SPKMIXL_VOL_MASK 0x0020 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_MIXINL_SPKMIXL_VOL_SHIFT 5 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_MIXINL_SPKMIXL_VOL_WIDTH 1 /* MIXINL_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL 0x0010 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL_MASK 0x0010 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL_SHIFT 4 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_IN1LP_SPKMIXL_VOL_WIDTH 1 /* IN1LP_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL 0x0008 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL_MASK 0x0008 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL_SHIFT 3 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_MIXOUTL_SPKMIXL_VOL_WIDTH 1 /* MIXOUTL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL 0x0004 /* DACL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL_MASK 0x0004 /* DACL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL_SHIFT 2 /* DACL_SPKMIXL_VOL */
+#define WM8993_DACL_SPKMIXL_VOL_WIDTH 1 /* DACL_SPKMIXL_VOL */
+#define WM8993_SPKMIXL_VOL_MASK 0x0003 /* SPKMIXL_VOL - [1:0] */
+#define WM8993_SPKMIXL_VOL_SHIFT 0 /* SPKMIXL_VOL - [1:0] */
+#define WM8993_SPKMIXL_VOL_WIDTH 2 /* SPKMIXL_VOL - [1:0] */
+
+/*
+ * R35 (0x23) - SPKMIXR Attenuation
+ */
+#define WM8993_SPKOUT_CLASSAB_MODE 0x0100 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_SPKOUT_CLASSAB_MODE_MASK 0x0100 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_SPKOUT_CLASSAB_MODE_SHIFT 8 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_SPKOUT_CLASSAB_MODE_WIDTH 1 /* SPKOUT_CLASSAB_MODE */
+#define WM8993_MIXINR_SPKMIXR_VOL 0x0020 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_MIXINR_SPKMIXR_VOL_MASK 0x0020 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_MIXINR_SPKMIXR_VOL_SHIFT 5 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_MIXINR_SPKMIXR_VOL_WIDTH 1 /* MIXINR_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL 0x0010 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL_MASK 0x0010 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL_SHIFT 4 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_IN1RP_SPKMIXR_VOL_WIDTH 1 /* IN1RP_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL 0x0008 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL_MASK 0x0008 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL_SHIFT 3 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_MIXOUTR_SPKMIXR_VOL_WIDTH 1 /* MIXOUTR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL 0x0004 /* DACR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL_MASK 0x0004 /* DACR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL_SHIFT 2 /* DACR_SPKMIXR_VOL */
+#define WM8993_DACR_SPKMIXR_VOL_WIDTH 1 /* DACR_SPKMIXR_VOL */
+#define WM8993_SPKMIXR_VOL_MASK 0x0003 /* SPKMIXR_VOL - [1:0] */
+#define WM8993_SPKMIXR_VOL_SHIFT 0 /* SPKMIXR_VOL - [1:0] */
+#define WM8993_SPKMIXR_VOL_WIDTH 2 /* SPKMIXR_VOL - [1:0] */
+
+/*
+ * R36 (0x24) - SPKOUT Mixers
+ */
+#define WM8993_VRX_TO_SPKOUTL 0x0020 /* VRX_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTL_MASK 0x0020 /* VRX_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTL_SHIFT 5 /* VRX_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTL_WIDTH 1 /* VRX_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL 0x0010 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL_MASK 0x0010 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL_SHIFT 4 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXL_TO_SPKOUTL_WIDTH 1 /* SPKMIXL_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL 0x0008 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL_MASK 0x0008 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL_SHIFT 3 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_SPKMIXR_TO_SPKOUTL_WIDTH 1 /* SPKMIXR_TO_SPKOUTL */
+#define WM8993_VRX_TO_SPKOUTR 0x0004 /* VRX_TO_SPKOUTR */
+#define WM8993_VRX_TO_SPKOUTR_MASK 0x0004 /* VRX_TO_SPKOUTR */
+#define WM8993_VRX_TO_SPKOUTR_SHIFT 2 /* VRX_TO_SPKOUTR */
+#define WM8993_VRX_TO_SPKOUTR_WIDTH 1 /* VRX_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR 0x0002 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR_MASK 0x0002 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR_SHIFT 1 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXL_TO_SPKOUTR_WIDTH 1 /* SPKMIXL_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR 0x0001 /* SPKMIXR_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR_MASK 0x0001 /* SPKMIXR_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR_SHIFT 0 /* SPKMIXR_TO_SPKOUTR */
+#define WM8993_SPKMIXR_TO_SPKOUTR_WIDTH 1 /* SPKMIXR_TO_SPKOUTR */
+
+/*
+ * R37 (0x25) - SPKOUT Boost
+ */
+#define WM8993_SPKOUTL_BOOST_MASK 0x0038 /* SPKOUTL_BOOST - [5:3] */
+#define WM8993_SPKOUTL_BOOST_SHIFT 3 /* SPKOUTL_BOOST - [5:3] */
+#define WM8993_SPKOUTL_BOOST_WIDTH 3 /* SPKOUTL_BOOST - [5:3] */
+#define WM8993_SPKOUTR_BOOST_MASK 0x0007 /* SPKOUTR_BOOST - [2:0] */
+#define WM8993_SPKOUTR_BOOST_SHIFT 0 /* SPKOUTR_BOOST - [2:0] */
+#define WM8993_SPKOUTR_BOOST_WIDTH 3 /* SPKOUTR_BOOST - [2:0] */
+
+/*
+ * R38 (0x26) - Speaker Volume Left
+ */
+#define WM8993_SPKOUT_VU 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_MASK 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_SHIFT 8 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_WIDTH 1 /* SPKOUT_VU */
+#define WM8993_SPKOUTL_ZC 0x0080 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_ZC_MASK 0x0080 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_ZC_SHIFT 7 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_ZC_WIDTH 1 /* SPKOUTL_ZC */
+#define WM8993_SPKOUTL_MUTE_N 0x0040 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_MUTE_N_MASK 0x0040 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_MUTE_N_SHIFT 6 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_MUTE_N_WIDTH 1 /* SPKOUTL_MUTE_N */
+#define WM8993_SPKOUTL_VOL_MASK 0x003F /* SPKOUTL_VOL - [5:0] */
+#define WM8993_SPKOUTL_VOL_SHIFT 0 /* SPKOUTL_VOL - [5:0] */
+#define WM8993_SPKOUTL_VOL_WIDTH 6 /* SPKOUTL_VOL - [5:0] */
+
+/*
+ * R39 (0x27) - Speaker Volume Right
+ */
+#define WM8993_SPKOUT_VU 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_MASK 0x0100 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_SHIFT 8 /* SPKOUT_VU */
+#define WM8993_SPKOUT_VU_WIDTH 1 /* SPKOUT_VU */
+#define WM8993_SPKOUTR_ZC 0x0080 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_ZC_MASK 0x0080 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_ZC_SHIFT 7 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_ZC_WIDTH 1 /* SPKOUTR_ZC */
+#define WM8993_SPKOUTR_MUTE_N 0x0040 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_MUTE_N_MASK 0x0040 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_MUTE_N_SHIFT 6 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_MUTE_N_WIDTH 1 /* SPKOUTR_MUTE_N */
+#define WM8993_SPKOUTR_VOL_MASK 0x003F /* SPKOUTR_VOL - [5:0] */
+#define WM8993_SPKOUTR_VOL_SHIFT 0 /* SPKOUTR_VOL - [5:0] */
+#define WM8993_SPKOUTR_VOL_WIDTH 6 /* SPKOUTR_VOL - [5:0] */
+
+/*
+ * R40 (0x28) - Input Mixer2
+ */
+#define WM8993_IN2LP_TO_IN2L 0x0080 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LP_TO_IN2L_MASK 0x0080 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LP_TO_IN2L_SHIFT 7 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LP_TO_IN2L_WIDTH 1 /* IN2LP_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L 0x0040 /* IN2LN_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L_MASK 0x0040 /* IN2LN_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L_SHIFT 6 /* IN2LN_TO_IN2L */
+#define WM8993_IN2LN_TO_IN2L_WIDTH 1 /* IN2LN_TO_IN2L */
+#define WM8993_IN1LP_TO_IN1L 0x0020 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LP_TO_IN1L_MASK 0x0020 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LP_TO_IN1L_SHIFT 5 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LP_TO_IN1L_WIDTH 1 /* IN1LP_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L 0x0010 /* IN1LN_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L_MASK 0x0010 /* IN1LN_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L_SHIFT 4 /* IN1LN_TO_IN1L */
+#define WM8993_IN1LN_TO_IN1L_WIDTH 1 /* IN1LN_TO_IN1L */
+#define WM8993_IN2RP_TO_IN2R 0x0008 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RP_TO_IN2R_MASK 0x0008 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RP_TO_IN2R_SHIFT 3 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RP_TO_IN2R_WIDTH 1 /* IN2RP_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R 0x0004 /* IN2RN_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R_MASK 0x0004 /* IN2RN_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R_SHIFT 2 /* IN2RN_TO_IN2R */
+#define WM8993_IN2RN_TO_IN2R_WIDTH 1 /* IN2RN_TO_IN2R */
+#define WM8993_IN1RP_TO_IN1R 0x0002 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RP_TO_IN1R_MASK 0x0002 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RP_TO_IN1R_SHIFT 1 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RP_TO_IN1R_WIDTH 1 /* IN1RP_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R 0x0001 /* IN1RN_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R_MASK 0x0001 /* IN1RN_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R_SHIFT 0 /* IN1RN_TO_IN1R */
+#define WM8993_IN1RN_TO_IN1R_WIDTH 1 /* IN1RN_TO_IN1R */
+
+/*
+ * R41 (0x29) - Input Mixer3
+ */
+#define WM8993_IN2L_TO_MIXINL 0x0100 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_TO_MIXINL_MASK 0x0100 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_TO_MIXINL_SHIFT 8 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_TO_MIXINL_WIDTH 1 /* IN2L_TO_MIXINL */
+#define WM8993_IN2L_MIXINL_VOL 0x0080 /* IN2L_MIXINL_VOL */
+#define WM8993_IN2L_MIXINL_VOL_MASK 0x0080 /* IN2L_MIXINL_VOL */
+#define WM8993_IN2L_MIXINL_VOL_SHIFT 7 /* IN2L_MIXINL_VOL */
+#define WM8993_IN2L_MIXINL_VOL_WIDTH 1 /* IN2L_MIXINL_VOL */
+#define WM8993_IN1L_TO_MIXINL 0x0020 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_TO_MIXINL_MASK 0x0020 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_TO_MIXINL_SHIFT 5 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_TO_MIXINL_WIDTH 1 /* IN1L_TO_MIXINL */
+#define WM8993_IN1L_MIXINL_VOL 0x0010 /* IN1L_MIXINL_VOL */
+#define WM8993_IN1L_MIXINL_VOL_MASK 0x0010 /* IN1L_MIXINL_VOL */
+#define WM8993_IN1L_MIXINL_VOL_SHIFT 4 /* IN1L_MIXINL_VOL */
+#define WM8993_IN1L_MIXINL_VOL_WIDTH 1 /* IN1L_MIXINL_VOL */
+#define WM8993_MIXOUTL_MIXINL_VOL_MASK 0x0007 /* MIXOUTL_MIXINL_VOL - [2:0] */
+#define WM8993_MIXOUTL_MIXINL_VOL_SHIFT 0 /* MIXOUTL_MIXINL_VOL - [2:0] */
+#define WM8993_MIXOUTL_MIXINL_VOL_WIDTH 3 /* MIXOUTL_MIXINL_VOL - [2:0] */
+
+/*
+ * R42 (0x2A) - Input Mixer4
+ */
+#define WM8993_IN2R_TO_MIXINR 0x0100 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_TO_MIXINR_MASK 0x0100 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_TO_MIXINR_SHIFT 8 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_TO_MIXINR_WIDTH 1 /* IN2R_TO_MIXINR */
+#define WM8993_IN2R_MIXINR_VOL 0x0080 /* IN2R_MIXINR_VOL */
+#define WM8993_IN2R_MIXINR_VOL_MASK 0x0080 /* IN2R_MIXINR_VOL */
+#define WM8993_IN2R_MIXINR_VOL_SHIFT 7 /* IN2R_MIXINR_VOL */
+#define WM8993_IN2R_MIXINR_VOL_WIDTH 1 /* IN2R_MIXINR_VOL */
+#define WM8993_IN1R_TO_MIXINR 0x0020 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_TO_MIXINR_MASK 0x0020 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_TO_MIXINR_SHIFT 5 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_TO_MIXINR_WIDTH 1 /* IN1R_TO_MIXINR */
+#define WM8993_IN1R_MIXINR_VOL 0x0010 /* IN1R_MIXINR_VOL */
+#define WM8993_IN1R_MIXINR_VOL_MASK 0x0010 /* IN1R_MIXINR_VOL */
+#define WM8993_IN1R_MIXINR_VOL_SHIFT 4 /* IN1R_MIXINR_VOL */
+#define WM8993_IN1R_MIXINR_VOL_WIDTH 1 /* IN1R_MIXINR_VOL */
+#define WM8993_MIXOUTR_MIXINR_VOL_MASK 0x0007 /* MIXOUTR_MIXINR_VOL - [2:0] */
+#define WM8993_MIXOUTR_MIXINR_VOL_SHIFT 0 /* MIXOUTR_MIXINR_VOL - [2:0] */
+#define WM8993_MIXOUTR_MIXINR_VOL_WIDTH 3 /* MIXOUTR_MIXINR_VOL - [2:0] */
+
+/*
+ * R43 (0x2B) - Input Mixer5
+ */
+#define WM8993_IN1LP_MIXINL_VOL_MASK 0x01C0 /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8993_IN1LP_MIXINL_VOL_SHIFT 6 /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8993_IN1LP_MIXINL_VOL_WIDTH 3 /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8993_VRX_MIXINL_VOL_MASK 0x0007 /* VRX_MIXINL_VOL - [2:0] */
+#define WM8993_VRX_MIXINL_VOL_SHIFT 0 /* VRX_MIXINL_VOL - [2:0] */
+#define WM8993_VRX_MIXINL_VOL_WIDTH 3 /* VRX_MIXINL_VOL - [2:0] */
+
+/*
+ * R44 (0x2C) - Input Mixer6
+ */
+#define WM8993_IN1RP_MIXINR_VOL_MASK 0x01C0 /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8993_IN1RP_MIXINR_VOL_SHIFT 6 /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8993_IN1RP_MIXINR_VOL_WIDTH 3 /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8993_VRX_MIXINR_VOL_MASK 0x0007 /* VRX_MIXINR_VOL - [2:0] */
+#define WM8993_VRX_MIXINR_VOL_SHIFT 0 /* VRX_MIXINR_VOL - [2:0] */
+#define WM8993_VRX_MIXINR_VOL_WIDTH 3 /* VRX_MIXINR_VOL - [2:0] */
+
+/*
+ * R45 (0x2D) - Output Mixer1
+ */
+#define WM8993_DACL_TO_HPOUT1L 0x0100 /* DACL_TO_HPOUT1L */
+#define WM8993_DACL_TO_HPOUT1L_MASK 0x0100 /* DACL_TO_HPOUT1L */
+#define WM8993_DACL_TO_HPOUT1L_SHIFT 8 /* DACL_TO_HPOUT1L */
+#define WM8993_DACL_TO_HPOUT1L_WIDTH 1 /* DACL_TO_HPOUT1L */
+#define WM8993_MIXINR_TO_MIXOUTL 0x0080 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINR_TO_MIXOUTL_MASK 0x0080 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINR_TO_MIXOUTL_SHIFT 7 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINR_TO_MIXOUTL_WIDTH 1 /* MIXINR_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL 0x0040 /* MIXINL_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL_MASK 0x0040 /* MIXINL_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL_SHIFT 6 /* MIXINL_TO_MIXOUTL */
+#define WM8993_MIXINL_TO_MIXOUTL_WIDTH 1 /* MIXINL_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL 0x0020 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL_MASK 0x0020 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL_SHIFT 5 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2RN_TO_MIXOUTL_WIDTH 1 /* IN2RN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL 0x0010 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL_MASK 0x0010 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL_SHIFT 4 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN2LN_TO_MIXOUTL_WIDTH 1 /* IN2LN_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL 0x0008 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL_MASK 0x0008 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL_SHIFT 3 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1R_TO_MIXOUTL_WIDTH 1 /* IN1R_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL 0x0004 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL_MASK 0x0004 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL_SHIFT 2 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN1L_TO_MIXOUTL_WIDTH 1 /* IN1L_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL 0x0002 /* IN2LP_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL_MASK 0x0002 /* IN2LP_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL_SHIFT 1 /* IN2LP_TO_MIXOUTL */
+#define WM8993_IN2LP_TO_MIXOUTL_WIDTH 1 /* IN2LP_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL 0x0001 /* DACL_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL_MASK 0x0001 /* DACL_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL_SHIFT 0 /* DACL_TO_MIXOUTL */
+#define WM8993_DACL_TO_MIXOUTL_WIDTH 1 /* DACL_TO_MIXOUTL */
+
+/*
+ * R46 (0x2E) - Output Mixer2
+ */
+#define WM8993_DACR_TO_HPOUT1R 0x0100 /* DACR_TO_HPOUT1R */
+#define WM8993_DACR_TO_HPOUT1R_MASK 0x0100 /* DACR_TO_HPOUT1R */
+#define WM8993_DACR_TO_HPOUT1R_SHIFT 8 /* DACR_TO_HPOUT1R */
+#define WM8993_DACR_TO_HPOUT1R_WIDTH 1 /* DACR_TO_HPOUT1R */
+#define WM8993_MIXINL_TO_MIXOUTR 0x0080 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINL_TO_MIXOUTR_MASK 0x0080 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINL_TO_MIXOUTR_SHIFT 7 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINL_TO_MIXOUTR_WIDTH 1 /* MIXINL_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR 0x0040 /* MIXINR_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR_MASK 0x0040 /* MIXINR_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR_SHIFT 6 /* MIXINR_TO_MIXOUTR */
+#define WM8993_MIXINR_TO_MIXOUTR_WIDTH 1 /* MIXINR_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR 0x0020 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR_MASK 0x0020 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR_SHIFT 5 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2LN_TO_MIXOUTR_WIDTH 1 /* IN2LN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR 0x0010 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR_MASK 0x0010 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR_SHIFT 4 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN2RN_TO_MIXOUTR_WIDTH 1 /* IN2RN_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR 0x0008 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR_MASK 0x0008 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR_SHIFT 3 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1L_TO_MIXOUTR_WIDTH 1 /* IN1L_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR 0x0004 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR_MASK 0x0004 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR_SHIFT 2 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN1R_TO_MIXOUTR_WIDTH 1 /* IN1R_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR 0x0002 /* IN2RP_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR_MASK 0x0002 /* IN2RP_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR_SHIFT 1 /* IN2RP_TO_MIXOUTR */
+#define WM8993_IN2RP_TO_MIXOUTR_WIDTH 1 /* IN2RP_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR 0x0001 /* DACR_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR_MASK 0x0001 /* DACR_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR_SHIFT 0 /* DACR_TO_MIXOUTR */
+#define WM8993_DACR_TO_MIXOUTR_WIDTH 1 /* DACR_TO_MIXOUTR */
+
+/*
+ * R47 (0x2F) - Output Mixer3
+ */
+#define WM8993_IN2LP_MIXOUTL_VOL_MASK 0x0E00 /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2LP_MIXOUTL_VOL_SHIFT 9 /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2LP_MIXOUTL_VOL_WIDTH 3 /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2LN_MIXOUTL_VOL_MASK 0x01C0 /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTL_VOL_SHIFT 6 /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTL_VOL_WIDTH 3 /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN1R_MIXOUTL_VOL_MASK 0x0038 /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8993_IN1R_MIXOUTL_VOL_SHIFT 3 /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8993_IN1R_MIXOUTL_VOL_WIDTH 3 /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8993_IN1L_MIXOUTL_VOL_MASK 0x0007 /* IN1L_MIXOUTL_VOL - [2:0] */
+#define WM8993_IN1L_MIXOUTL_VOL_SHIFT 0 /* IN1L_MIXOUTL_VOL - [2:0] */
+#define WM8993_IN1L_MIXOUTL_VOL_WIDTH 3 /* IN1L_MIXOUTL_VOL - [2:0] */
+
+/*
+ * R48 (0x30) - Output Mixer4
+ */
+#define WM8993_IN2RP_MIXOUTR_VOL_MASK 0x0E00 /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2RP_MIXOUTR_VOL_SHIFT 9 /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2RP_MIXOUTR_VOL_WIDTH 3 /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2RN_MIXOUTR_VOL_MASK 0x01C0 /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTR_VOL_SHIFT 6 /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTR_VOL_WIDTH 3 /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN1L_MIXOUTR_VOL_MASK 0x0038 /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8993_IN1L_MIXOUTR_VOL_SHIFT 3 /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8993_IN1L_MIXOUTR_VOL_WIDTH 3 /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8993_IN1R_MIXOUTR_VOL_MASK 0x0007 /* IN1R_MIXOUTR_VOL - [2:0] */
+#define WM8993_IN1R_MIXOUTR_VOL_SHIFT 0 /* IN1R_MIXOUTR_VOL - [2:0] */
+#define WM8993_IN1R_MIXOUTR_VOL_WIDTH 3 /* IN1R_MIXOUTR_VOL - [2:0] */
+
+/*
+ * R49 (0x31) - Output Mixer5
+ */
+#define WM8993_DACL_MIXOUTL_VOL_MASK 0x0E00 /* DACL_MIXOUTL_VOL - [11:9] */
+#define WM8993_DACL_MIXOUTL_VOL_SHIFT 9 /* DACL_MIXOUTL_VOL - [11:9] */
+#define WM8993_DACL_MIXOUTL_VOL_WIDTH 3 /* DACL_MIXOUTL_VOL - [11:9] */
+#define WM8993_IN2RN_MIXOUTL_VOL_MASK 0x01C0 /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTL_VOL_SHIFT 6 /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8993_IN2RN_MIXOUTL_VOL_WIDTH 3 /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8993_MIXINR_MIXOUTL_VOL_MASK 0x0038 /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8993_MIXINR_MIXOUTL_VOL_SHIFT 3 /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8993_MIXINR_MIXOUTL_VOL_WIDTH 3 /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8993_MIXINL_MIXOUTL_VOL_MASK 0x0007 /* MIXINL_MIXOUTL_VOL - [2:0] */
+#define WM8993_MIXINL_MIXOUTL_VOL_SHIFT 0 /* MIXINL_MIXOUTL_VOL - [2:0] */
+#define WM8993_MIXINL_MIXOUTL_VOL_WIDTH 3 /* MIXINL_MIXOUTL_VOL - [2:0] */
+
+/*
+ * R50 (0x32) - Output Mixer6
+ */
+#define WM8993_DACR_MIXOUTR_VOL_MASK 0x0E00 /* DACR_MIXOUTR_VOL - [11:9] */
+#define WM8993_DACR_MIXOUTR_VOL_SHIFT 9 /* DACR_MIXOUTR_VOL - [11:9] */
+#define WM8993_DACR_MIXOUTR_VOL_WIDTH 3 /* DACR_MIXOUTR_VOL - [11:9] */
+#define WM8993_IN2LN_MIXOUTR_VOL_MASK 0x01C0 /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTR_VOL_SHIFT 6 /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8993_IN2LN_MIXOUTR_VOL_WIDTH 3 /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8993_MIXINL_MIXOUTR_VOL_MASK 0x0038 /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8993_MIXINL_MIXOUTR_VOL_SHIFT 3 /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8993_MIXINL_MIXOUTR_VOL_WIDTH 3 /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8993_MIXINR_MIXOUTR_VOL_MASK 0x0007 /* MIXINR_MIXOUTR_VOL - [2:0] */
+#define WM8993_MIXINR_MIXOUTR_VOL_SHIFT 0 /* MIXINR_MIXOUTR_VOL - [2:0] */
+#define WM8993_MIXINR_MIXOUTR_VOL_WIDTH 3 /* MIXINR_MIXOUTR_VOL - [2:0] */
+
+/*
+ * R51 (0x33) - HPOUT2 Mixer
+ */
+#define WM8993_VRX_TO_HPOUT2 0x0020 /* VRX_TO_HPOUT2 */
+#define WM8993_VRX_TO_HPOUT2_MASK 0x0020 /* VRX_TO_HPOUT2 */
+#define WM8993_VRX_TO_HPOUT2_SHIFT 5 /* VRX_TO_HPOUT2 */
+#define WM8993_VRX_TO_HPOUT2_WIDTH 1 /* VRX_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2 0x0010 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2_MASK 0x0010 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2_SHIFT 4 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTLVOL_TO_HPOUT2_WIDTH 1 /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2 0x0008 /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2_MASK 0x0008 /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2_SHIFT 3 /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8993_MIXOUTRVOL_TO_HPOUT2_WIDTH 1 /* MIXOUTRVOL_TO_HPOUT2 */
+
+/*
+ * R52 (0x34) - Line Mixer1
+ */
+#define WM8993_MIXOUTL_TO_LINEOUT1N 0x0040 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTL_TO_LINEOUT1N_MASK 0x0040 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTL_TO_LINEOUT1N_SHIFT 6 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTL_TO_LINEOUT1N_WIDTH 1 /* MIXOUTL_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N 0x0020 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N_MASK 0x0020 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N_SHIFT 5 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_MIXOUTR_TO_LINEOUT1N_WIDTH 1 /* MIXOUTR_TO_LINEOUT1N */
+#define WM8993_LINEOUT1_MODE 0x0010 /* LINEOUT1_MODE */
+#define WM8993_LINEOUT1_MODE_MASK 0x0010 /* LINEOUT1_MODE */
+#define WM8993_LINEOUT1_MODE_SHIFT 4 /* LINEOUT1_MODE */
+#define WM8993_LINEOUT1_MODE_WIDTH 1 /* LINEOUT1_MODE */
+#define WM8993_IN1R_TO_LINEOUT1P 0x0004 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1R_TO_LINEOUT1P_MASK 0x0004 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1R_TO_LINEOUT1P_SHIFT 2 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1R_TO_LINEOUT1P_WIDTH 1 /* IN1R_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P 0x0002 /* IN1L_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P_MASK 0x0002 /* IN1L_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P_SHIFT 1 /* IN1L_TO_LINEOUT1P */
+#define WM8993_IN1L_TO_LINEOUT1P_WIDTH 1 /* IN1L_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P 0x0001 /* MIXOUTL_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P_MASK 0x0001 /* MIXOUTL_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P_SHIFT 0 /* MIXOUTL_TO_LINEOUT1P */
+#define WM8993_MIXOUTL_TO_LINEOUT1P_WIDTH 1 /* MIXOUTL_TO_LINEOUT1P */
+
+/*
+ * R53 (0x35) - Line Mixer2
+ */
+#define WM8993_MIXOUTR_TO_LINEOUT2N 0x0040 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTR_TO_LINEOUT2N_MASK 0x0040 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTR_TO_LINEOUT2N_SHIFT 6 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTR_TO_LINEOUT2N_WIDTH 1 /* MIXOUTR_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N 0x0020 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N_MASK 0x0020 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N_SHIFT 5 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_MIXOUTL_TO_LINEOUT2N_WIDTH 1 /* MIXOUTL_TO_LINEOUT2N */
+#define WM8993_LINEOUT2_MODE 0x0010 /* LINEOUT2_MODE */
+#define WM8993_LINEOUT2_MODE_MASK 0x0010 /* LINEOUT2_MODE */
+#define WM8993_LINEOUT2_MODE_SHIFT 4 /* LINEOUT2_MODE */
+#define WM8993_LINEOUT2_MODE_WIDTH 1 /* LINEOUT2_MODE */
+#define WM8993_IN1L_TO_LINEOUT2P 0x0004 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1L_TO_LINEOUT2P_MASK 0x0004 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1L_TO_LINEOUT2P_SHIFT 2 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1L_TO_LINEOUT2P_WIDTH 1 /* IN1L_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P 0x0002 /* IN1R_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P_MASK 0x0002 /* IN1R_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P_SHIFT 1 /* IN1R_TO_LINEOUT2P */
+#define WM8993_IN1R_TO_LINEOUT2P_WIDTH 1 /* IN1R_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P 0x0001 /* MIXOUTR_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P_MASK 0x0001 /* MIXOUTR_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P_SHIFT 0 /* MIXOUTR_TO_LINEOUT2P */
+#define WM8993_MIXOUTR_TO_LINEOUT2P_WIDTH 1 /* MIXOUTR_TO_LINEOUT2P */
+
+/*
+ * R54 (0x36) - Speaker Mixer
+ */
+#define WM8993_SPKAB_REF_SEL 0x0100 /* SPKAB_REF_SEL */
+#define WM8993_SPKAB_REF_SEL_MASK 0x0100 /* SPKAB_REF_SEL */
+#define WM8993_SPKAB_REF_SEL_SHIFT 8 /* SPKAB_REF_SEL */
+#define WM8993_SPKAB_REF_SEL_WIDTH 1 /* SPKAB_REF_SEL */
+#define WM8993_MIXINL_TO_SPKMIXL 0x0080 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINL_TO_SPKMIXL_MASK 0x0080 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINL_TO_SPKMIXL_SHIFT 7 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINL_TO_SPKMIXL_WIDTH 1 /* MIXINL_TO_SPKMIXL */
+#define WM8993_MIXINR_TO_SPKMIXR 0x0040 /* MIXINR_TO_SPKMIXR */
+#define WM8993_MIXINR_TO_SPKMIXR_MASK 0x0040 /* MIXINR_TO_SPKMIXR */
+#define WM8993_MIXINR_TO_SPKMIXR_SHIFT 6 /* MIXINR_TO_SPKMIXR */
+#define WM8993_MIXINR_TO_SPKMIXR_WIDTH 1 /* MIXINR_TO_SPKMIXR */
+#define WM8993_IN1LP_TO_SPKMIXL 0x0020 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1LP_TO_SPKMIXL_MASK 0x0020 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1LP_TO_SPKMIXL_SHIFT 5 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1LP_TO_SPKMIXL_WIDTH 1 /* IN1LP_TO_SPKMIXL */
+#define WM8993_IN1RP_TO_SPKMIXR 0x0010 /* IN1RP_TO_SPKMIXR */
+#define WM8993_IN1RP_TO_SPKMIXR_MASK 0x0010 /* IN1RP_TO_SPKMIXR */
+#define WM8993_IN1RP_TO_SPKMIXR_SHIFT 4 /* IN1RP_TO_SPKMIXR */
+#define WM8993_IN1RP_TO_SPKMIXR_WIDTH 1 /* IN1RP_TO_SPKMIXR */
+#define WM8993_MIXOUTL_TO_SPKMIXL 0x0008 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTL_TO_SPKMIXL_MASK 0x0008 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTL_TO_SPKMIXL_SHIFT 3 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTL_TO_SPKMIXL_WIDTH 1 /* MIXOUTL_TO_SPKMIXL */
+#define WM8993_MIXOUTR_TO_SPKMIXR 0x0004 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_MIXOUTR_TO_SPKMIXR_MASK 0x0004 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_MIXOUTR_TO_SPKMIXR_SHIFT 2 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_MIXOUTR_TO_SPKMIXR_WIDTH 1 /* MIXOUTR_TO_SPKMIXR */
+#define WM8993_DACL_TO_SPKMIXL 0x0002 /* DACL_TO_SPKMIXL */
+#define WM8993_DACL_TO_SPKMIXL_MASK 0x0002 /* DACL_TO_SPKMIXL */
+#define WM8993_DACL_TO_SPKMIXL_SHIFT 1 /* DACL_TO_SPKMIXL */
+#define WM8993_DACL_TO_SPKMIXL_WIDTH 1 /* DACL_TO_SPKMIXL */
+#define WM8993_DACR_TO_SPKMIXR 0x0001 /* DACR_TO_SPKMIXR */
+#define WM8993_DACR_TO_SPKMIXR_MASK 0x0001 /* DACR_TO_SPKMIXR */
+#define WM8993_DACR_TO_SPKMIXR_SHIFT 0 /* DACR_TO_SPKMIXR */
+#define WM8993_DACR_TO_SPKMIXR_WIDTH 1 /* DACR_TO_SPKMIXR */
+
+/*
+ * R55 (0x37) - Additional Control
+ */
+#define WM8993_LINEOUT1_FB 0x0080 /* LINEOUT1_FB */
+#define WM8993_LINEOUT1_FB_MASK 0x0080 /* LINEOUT1_FB */
+#define WM8993_LINEOUT1_FB_SHIFT 7 /* LINEOUT1_FB */
+#define WM8993_LINEOUT1_FB_WIDTH 1 /* LINEOUT1_FB */
+#define WM8993_LINEOUT2_FB 0x0040 /* LINEOUT2_FB */
+#define WM8993_LINEOUT2_FB_MASK 0x0040 /* LINEOUT2_FB */
+#define WM8993_LINEOUT2_FB_SHIFT 6 /* LINEOUT2_FB */
+#define WM8993_LINEOUT2_FB_WIDTH 1 /* LINEOUT2_FB */
+#define WM8993_VROI 0x0001 /* VROI */
+#define WM8993_VROI_MASK 0x0001 /* VROI */
+#define WM8993_VROI_SHIFT 0 /* VROI */
+#define WM8993_VROI_WIDTH 1 /* VROI */
+
+/*
+ * R56 (0x38) - AntiPOP1
+ */
+#define WM8993_LINEOUT_VMID_BUF_ENA 0x0080 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_LINEOUT_VMID_BUF_ENA_MASK 0x0080 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_LINEOUT_VMID_BUF_ENA_SHIFT 7 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_LINEOUT_VMID_BUF_ENA_WIDTH 1 /* LINEOUT_VMID_BUF_ENA */
+#define WM8993_HPOUT2_IN_ENA 0x0040 /* HPOUT2_IN_ENA */
+#define WM8993_HPOUT2_IN_ENA_MASK 0x0040 /* HPOUT2_IN_ENA */
+#define WM8993_HPOUT2_IN_ENA_SHIFT 6 /* HPOUT2_IN_ENA */
+#define WM8993_HPOUT2_IN_ENA_WIDTH 1 /* HPOUT2_IN_ENA */
+#define WM8993_LINEOUT1_DISCH 0x0020 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT1_DISCH_MASK 0x0020 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT1_DISCH_SHIFT 5 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT1_DISCH_WIDTH 1 /* LINEOUT1_DISCH */
+#define WM8993_LINEOUT2_DISCH 0x0010 /* LINEOUT2_DISCH */
+#define WM8993_LINEOUT2_DISCH_MASK 0x0010 /* LINEOUT2_DISCH */
+#define WM8993_LINEOUT2_DISCH_SHIFT 4 /* LINEOUT2_DISCH */
+#define WM8993_LINEOUT2_DISCH_WIDTH 1 /* LINEOUT2_DISCH */
+
+/*
+ * R57 (0x39) - AntiPOP2
+ */
+#define WM8993_VMID_RAMP_MASK 0x0060 /* VMID_RAMP - [6:5] */
+#define WM8993_VMID_RAMP_SHIFT 5 /* VMID_RAMP - [6:5] */
+#define WM8993_VMID_RAMP_WIDTH 2 /* VMID_RAMP - [6:5] */
+#define WM8993_VMID_BUF_ENA 0x0008 /* VMID_BUF_ENA */
+#define WM8993_VMID_BUF_ENA_MASK 0x0008 /* VMID_BUF_ENA */
+#define WM8993_VMID_BUF_ENA_SHIFT 3 /* VMID_BUF_ENA */
+#define WM8993_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */
+#define WM8993_STARTUP_BIAS_ENA 0x0004 /* STARTUP_BIAS_ENA */
+#define WM8993_STARTUP_BIAS_ENA_MASK 0x0004 /* STARTUP_BIAS_ENA */
+#define WM8993_STARTUP_BIAS_ENA_SHIFT 2 /* STARTUP_BIAS_ENA */
+#define WM8993_STARTUP_BIAS_ENA_WIDTH 1 /* STARTUP_BIAS_ENA */
+#define WM8993_BIAS_SRC 0x0002 /* BIAS_SRC */
+#define WM8993_BIAS_SRC_MASK 0x0002 /* BIAS_SRC */
+#define WM8993_BIAS_SRC_SHIFT 1 /* BIAS_SRC */
+#define WM8993_BIAS_SRC_WIDTH 1 /* BIAS_SRC */
+#define WM8993_VMID_DISCH 0x0001 /* VMID_DISCH */
+#define WM8993_VMID_DISCH_MASK 0x0001 /* VMID_DISCH */
+#define WM8993_VMID_DISCH_SHIFT 0 /* VMID_DISCH */
+#define WM8993_VMID_DISCH_WIDTH 1 /* VMID_DISCH */
+
+/*
+ * R58 (0x3A) - MICBIAS
+ */
+#define WM8993_JD_SCTHR_MASK 0x00C0 /* JD_SCTHR - [7:6] */
+#define WM8993_JD_SCTHR_SHIFT 6 /* JD_SCTHR - [7:6] */
+#define WM8993_JD_SCTHR_WIDTH 2 /* JD_SCTHR - [7:6] */
+#define WM8993_JD_THR_MASK 0x0030 /* JD_THR - [5:4] */
+#define WM8993_JD_THR_SHIFT 4 /* JD_THR - [5:4] */
+#define WM8993_JD_THR_WIDTH 2 /* JD_THR - [5:4] */
+#define WM8993_JD_ENA 0x0004 /* JD_ENA */
+#define WM8993_JD_ENA_MASK 0x0004 /* JD_ENA */
+#define WM8993_JD_ENA_SHIFT 2 /* JD_ENA */
+#define WM8993_JD_ENA_WIDTH 1 /* JD_ENA */
+#define WM8993_MICB2_LVL 0x0002 /* MICB2_LVL */
+#define WM8993_MICB2_LVL_MASK 0x0002 /* MICB2_LVL */
+#define WM8993_MICB2_LVL_SHIFT 1 /* MICB2_LVL */
+#define WM8993_MICB2_LVL_WIDTH 1 /* MICB2_LVL */
+#define WM8993_MICB1_LVL 0x0001 /* MICB1_LVL */
+#define WM8993_MICB1_LVL_MASK 0x0001 /* MICB1_LVL */
+#define WM8993_MICB1_LVL_SHIFT 0 /* MICB1_LVL */
+#define WM8993_MICB1_LVL_WIDTH 1 /* MICB1_LVL */
+
+/*
+ * R60 (0x3C) - FLL Control 1
+ */
+#define WM8993_FLL_FRAC 0x0004 /* FLL_FRAC */
+#define WM8993_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */
+#define WM8993_FLL_FRAC_SHIFT 2 /* FLL_FRAC */
+#define WM8993_FLL_FRAC_WIDTH 1 /* FLL_FRAC */
+#define WM8993_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM8993_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM8993_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM8993_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM8993_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM8993_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM8993_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM8993_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R61 (0x3D) - FLL Control 2
+ */
+#define WM8993_FLL_OUTDIV_MASK 0x0700 /* FLL_OUTDIV - [10:8] */
+#define WM8993_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [10:8] */
+#define WM8993_FLL_OUTDIV_WIDTH 3 /* FLL_OUTDIV - [10:8] */
+#define WM8993_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM8993_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM8993_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM8993_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM8993_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM8993_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R62 (0x3E) - FLL Control 3
+ */
+#define WM8993_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM8993_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM8993_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R63 (0x3F) - FLL Control 4
+ */
+#define WM8993_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM8993_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM8993_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM8993_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM8993_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM8993_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R64 (0x40) - FLL Control 5
+ */
+#define WM8993_FLL_FRC_NCO_VAL_MASK 0x1F80 /* FLL_FRC_NCO_VAL - [12:7] */
+#define WM8993_FLL_FRC_NCO_VAL_SHIFT 7 /* FLL_FRC_NCO_VAL - [12:7] */
+#define WM8993_FLL_FRC_NCO_VAL_WIDTH 6 /* FLL_FRC_NCO_VAL - [12:7] */
+#define WM8993_FLL_FRC_NCO 0x0040 /* FLL_FRC_NCO */
+#define WM8993_FLL_FRC_NCO_MASK 0x0040 /* FLL_FRC_NCO */
+#define WM8993_FLL_FRC_NCO_SHIFT 6 /* FLL_FRC_NCO */
+#define WM8993_FLL_FRC_NCO_WIDTH 1 /* FLL_FRC_NCO */
+#define WM8993_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8993_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8993_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM8993_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */
+#define WM8993_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */
+#define WM8993_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */
+
+/*
+ * R65 (0x41) - Clocking 3
+ */
+#define WM8993_CLK_DCS_DIV_MASK 0x3C00 /* CLK_DCS_DIV - [13:10] */
+#define WM8993_CLK_DCS_DIV_SHIFT 10 /* CLK_DCS_DIV - [13:10] */
+#define WM8993_CLK_DCS_DIV_WIDTH 4 /* CLK_DCS_DIV - [13:10] */
+#define WM8993_SAMPLE_RATE_MASK 0x0380 /* SAMPLE_RATE - [9:7] */
+#define WM8993_SAMPLE_RATE_SHIFT 7 /* SAMPLE_RATE - [9:7] */
+#define WM8993_SAMPLE_RATE_WIDTH 3 /* SAMPLE_RATE - [9:7] */
+#define WM8993_CLK_SYS_RATE_MASK 0x001E /* CLK_SYS_RATE - [4:1] */
+#define WM8993_CLK_SYS_RATE_SHIFT 1 /* CLK_SYS_RATE - [4:1] */
+#define WM8993_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [4:1] */
+#define WM8993_CLK_DSP_ENA 0x0001 /* CLK_DSP_ENA */
+#define WM8993_CLK_DSP_ENA_MASK 0x0001 /* CLK_DSP_ENA */
+#define WM8993_CLK_DSP_ENA_SHIFT 0 /* CLK_DSP_ENA */
+#define WM8993_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */
+
+/*
+ * R66 (0x42) - Clocking 4
+ */
+#define WM8993_DAC_DIV4 0x0200 /* DAC_DIV4 */
+#define WM8993_DAC_DIV4_MASK 0x0200 /* DAC_DIV4 */
+#define WM8993_DAC_DIV4_SHIFT 9 /* DAC_DIV4 */
+#define WM8993_DAC_DIV4_WIDTH 1 /* DAC_DIV4 */
+#define WM8993_CLK_256K_DIV_MASK 0x007E /* CLK_256K_DIV - [6:1] */
+#define WM8993_CLK_256K_DIV_SHIFT 1 /* CLK_256K_DIV - [6:1] */
+#define WM8993_CLK_256K_DIV_WIDTH 6 /* CLK_256K_DIV - [6:1] */
+#define WM8993_SR_MODE 0x0001 /* SR_MODE */
+#define WM8993_SR_MODE_MASK 0x0001 /* SR_MODE */
+#define WM8993_SR_MODE_SHIFT 0 /* SR_MODE */
+#define WM8993_SR_MODE_WIDTH 1 /* SR_MODE */
+
+/*
+ * R67 (0x43) - MW Slave Control
+ */
+#define WM8993_MASK_WRITE_ENA 0x0001 /* MASK_WRITE_ENA */
+#define WM8993_MASK_WRITE_ENA_MASK 0x0001 /* MASK_WRITE_ENA */
+#define WM8993_MASK_WRITE_ENA_SHIFT 0 /* MASK_WRITE_ENA */
+#define WM8993_MASK_WRITE_ENA_WIDTH 1 /* MASK_WRITE_ENA */
+
+/*
+ * R69 (0x45) - Bus Control 1
+ */
+#define WM8993_CLK_SYS_ENA 0x0002 /* CLK_SYS_ENA */
+#define WM8993_CLK_SYS_ENA_MASK 0x0002 /* CLK_SYS_ENA */
+#define WM8993_CLK_SYS_ENA_SHIFT 1 /* CLK_SYS_ENA */
+#define WM8993_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */
+
+/*
+ * R70 (0x46) - Write Sequencer 0
+ */
+#define WM8993_WSEQ_ENA 0x0100 /* WSEQ_ENA */
+#define WM8993_WSEQ_ENA_MASK 0x0100 /* WSEQ_ENA */
+#define WM8993_WSEQ_ENA_SHIFT 8 /* WSEQ_ENA */
+#define WM8993_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */
+#define WM8993_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8993_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8993_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */
+
+/*
+ * R71 (0x47) - Write Sequencer 1
+ */
+#define WM8993_WSEQ_DATA_WIDTH_MASK 0x7000 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8993_WSEQ_DATA_WIDTH_SHIFT 12 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8993_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8993_WSEQ_DATA_START_MASK 0x0F00 /* WSEQ_DATA_START - [11:8] */
+#define WM8993_WSEQ_DATA_START_SHIFT 8 /* WSEQ_DATA_START - [11:8] */
+#define WM8993_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [11:8] */
+#define WM8993_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */
+#define WM8993_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */
+#define WM8993_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */
+
+/*
+ * R72 (0x48) - Write Sequencer 2
+ */
+#define WM8993_WSEQ_EOS 0x4000 /* WSEQ_EOS */
+#define WM8993_WSEQ_EOS_MASK 0x4000 /* WSEQ_EOS */
+#define WM8993_WSEQ_EOS_SHIFT 14 /* WSEQ_EOS */
+#define WM8993_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */
+#define WM8993_WSEQ_DELAY_MASK 0x0F00 /* WSEQ_DELAY - [11:8] */
+#define WM8993_WSEQ_DELAY_SHIFT 8 /* WSEQ_DELAY - [11:8] */
+#define WM8993_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [11:8] */
+#define WM8993_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */
+#define WM8993_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */
+#define WM8993_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */
+
+/*
+ * R73 (0x49) - Write Sequencer 3
+ */
+#define WM8993_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */
+#define WM8993_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */
+#define WM8993_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */
+#define WM8993_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */
+#define WM8993_WSEQ_START 0x0100 /* WSEQ_START */
+#define WM8993_WSEQ_START_MASK 0x0100 /* WSEQ_START */
+#define WM8993_WSEQ_START_SHIFT 8 /* WSEQ_START */
+#define WM8993_WSEQ_START_WIDTH 1 /* WSEQ_START */
+#define WM8993_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */
+#define WM8993_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */
+#define WM8993_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */
+
+/*
+ * R74 (0x4A) - Write Sequencer 4
+ */
+#define WM8993_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */
+#define WM8993_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */
+#define WM8993_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */
+#define WM8993_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */
+
+/*
+ * R75 (0x4B) - Write Sequencer 5
+ */
+#define WM8993_WSEQ_CURRENT_INDEX_MASK 0x003F /* WSEQ_CURRENT_INDEX - [5:0] */
+#define WM8993_WSEQ_CURRENT_INDEX_SHIFT 0 /* WSEQ_CURRENT_INDEX - [5:0] */
+#define WM8993_WSEQ_CURRENT_INDEX_WIDTH 6 /* WSEQ_CURRENT_INDEX - [5:0] */
+
+/*
+ * R76 (0x4C) - Charge Pump 1
+ */
+#define WM8993_CP_ENA 0x8000 /* CP_ENA */
+#define WM8993_CP_ENA_MASK 0x8000 /* CP_ENA */
+#define WM8993_CP_ENA_SHIFT 15 /* CP_ENA */
+#define WM8993_CP_ENA_WIDTH 1 /* CP_ENA */
+
+/*
+ * R81 (0x51) - Class W 0
+ */
+#define WM8993_CP_DYN_FREQ 0x0002 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_FREQ_MASK 0x0002 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_FREQ_SHIFT 1 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_FREQ_WIDTH 1 /* CP_DYN_FREQ */
+#define WM8993_CP_DYN_V 0x0001 /* CP_DYN_V */
+#define WM8993_CP_DYN_V_MASK 0x0001 /* CP_DYN_V */
+#define WM8993_CP_DYN_V_SHIFT 0 /* CP_DYN_V */
+#define WM8993_CP_DYN_V_WIDTH 1 /* CP_DYN_V */
+
+/*
+ * R84 (0x54) - DC Servo 0
+ */
+#define WM8993_DCS_TRIG_SINGLE_1 0x2000 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_1_MASK 0x2000 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_1_SHIFT 13 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_1_WIDTH 1 /* DCS_TRIG_SINGLE_1 */
+#define WM8993_DCS_TRIG_SINGLE_0 0x1000 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SINGLE_0_MASK 0x1000 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SINGLE_0_SHIFT 12 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SINGLE_0_WIDTH 1 /* DCS_TRIG_SINGLE_0 */
+#define WM8993_DCS_TRIG_SERIES_1 0x0200 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_1_MASK 0x0200 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_1_SHIFT 9 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_1_WIDTH 1 /* DCS_TRIG_SERIES_1 */
+#define WM8993_DCS_TRIG_SERIES_0 0x0100 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_SERIES_0_MASK 0x0100 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_SERIES_0_SHIFT 8 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_SERIES_0_WIDTH 1 /* DCS_TRIG_SERIES_0 */
+#define WM8993_DCS_TRIG_STARTUP_1 0x0020 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_1_MASK 0x0020 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_1_SHIFT 5 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_1_WIDTH 1 /* DCS_TRIG_STARTUP_1 */
+#define WM8993_DCS_TRIG_STARTUP_0 0x0010 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_STARTUP_0_MASK 0x0010 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_STARTUP_0_SHIFT 4 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_STARTUP_0_WIDTH 1 /* DCS_TRIG_STARTUP_0 */
+#define WM8993_DCS_TRIG_DAC_WR_1 0x0008 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_1_MASK 0x0008 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_1_SHIFT 3 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_1_WIDTH 1 /* DCS_TRIG_DAC_WR_1 */
+#define WM8993_DCS_TRIG_DAC_WR_0 0x0004 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_TRIG_DAC_WR_0_MASK 0x0004 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_TRIG_DAC_WR_0_SHIFT 2 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_TRIG_DAC_WR_0_WIDTH 1 /* DCS_TRIG_DAC_WR_0 */
+#define WM8993_DCS_ENA_CHAN_1 0x0002 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_1_MASK 0x0002 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_1_SHIFT 1 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_1_WIDTH 1 /* DCS_ENA_CHAN_1 */
+#define WM8993_DCS_ENA_CHAN_0 0x0001 /* DCS_ENA_CHAN_0 */
+#define WM8993_DCS_ENA_CHAN_0_MASK 0x0001 /* DCS_ENA_CHAN_0 */
+#define WM8993_DCS_ENA_CHAN_0_SHIFT 0 /* DCS_ENA_CHAN_0 */
+#define WM8993_DCS_ENA_CHAN_0_WIDTH 1 /* DCS_ENA_CHAN_0 */
+
+/*
+ * R85 (0x55) - DC Servo 1
+ */
+#define WM8993_DCS_SERIES_NO_01_MASK 0x0FE0 /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8993_DCS_SERIES_NO_01_SHIFT 5 /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8993_DCS_SERIES_NO_01_WIDTH 7 /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8993_DCS_TIMER_PERIOD_01_MASK 0x000F /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8993_DCS_TIMER_PERIOD_01_SHIFT 0 /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8993_DCS_TIMER_PERIOD_01_WIDTH 4 /* DCS_TIMER_PERIOD_01 - [3:0] */
+
+/*
+ * R87 (0x57) - DC Servo 3
+ */
+#define WM8993_DCS_DAC_WR_VAL_1_MASK 0xFF00 /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8993_DCS_DAC_WR_VAL_1_SHIFT 8 /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8993_DCS_DAC_WR_VAL_1_WIDTH 8 /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8993_DCS_DAC_WR_VAL_0_MASK 0x00FF /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8993_DCS_DAC_WR_VAL_0_SHIFT 0 /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8993_DCS_DAC_WR_VAL_0_WIDTH 8 /* DCS_DAC_WR_VAL_0 - [7:0] */
+
+/*
+ * R88 (0x58) - DC Servo Readback 0
+ */
+#define WM8993_DCS_DATAPATH_BUSY 0x4000 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_DATAPATH_BUSY_MASK 0x4000 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_DATAPATH_BUSY_SHIFT 14 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_DATAPATH_BUSY_WIDTH 1 /* DCS_DATAPATH_BUSY */
+#define WM8993_DCS_CHANNEL_MASK 0x3000 /* DCS_CHANNEL - [13:12] */
+#define WM8993_DCS_CHANNEL_SHIFT 12 /* DCS_CHANNEL - [13:12] */
+#define WM8993_DCS_CHANNEL_WIDTH 2 /* DCS_CHANNEL - [13:12] */
+#define WM8993_DCS_CAL_COMPLETE_MASK 0x0300 /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8993_DCS_CAL_COMPLETE_SHIFT 8 /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8993_DCS_CAL_COMPLETE_WIDTH 2 /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8993_DCS_DAC_WR_COMPLETE_MASK 0x0030 /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8993_DCS_DAC_WR_COMPLETE_SHIFT 4 /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8993_DCS_DAC_WR_COMPLETE_WIDTH 2 /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8993_DCS_STARTUP_COMPLETE_MASK 0x0003 /* DCS_STARTUP_COMPLETE - [1:0] */
+#define WM8993_DCS_STARTUP_COMPLETE_SHIFT 0 /* DCS_STARTUP_COMPLETE - [1:0] */
+#define WM8993_DCS_STARTUP_COMPLETE_WIDTH 2 /* DCS_STARTUP_COMPLETE - [1:0] */
+
+/*
+ * R89 (0x59) - DC Servo Readback 1
+ */
+#define WM8993_DCS_INTEG_CHAN_1_MASK 0x00FF /* DCS_INTEG_CHAN_1 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_1_SHIFT 0 /* DCS_INTEG_CHAN_1 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_1_WIDTH 8 /* DCS_INTEG_CHAN_1 - [7:0] */
+
+/*
+ * R90 (0x5A) - DC Servo Readback 2
+ */
+#define WM8993_DCS_INTEG_CHAN_0_MASK 0x00FF /* DCS_INTEG_CHAN_0 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_0_SHIFT 0 /* DCS_INTEG_CHAN_0 - [7:0] */
+#define WM8993_DCS_INTEG_CHAN_0_WIDTH 8 /* DCS_INTEG_CHAN_0 - [7:0] */
+
+/*
+ * R96 (0x60) - Analogue HP 0
+ */
+#define WM8993_HPOUT1_AUTO_PU 0x0100 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1_AUTO_PU_MASK 0x0100 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1_AUTO_PU_SHIFT 8 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1_AUTO_PU_WIDTH 1 /* HPOUT1_AUTO_PU */
+#define WM8993_HPOUT1L_RMV_SHORT 0x0080 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_RMV_SHORT_MASK 0x0080 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_RMV_SHORT_SHIFT 7 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_RMV_SHORT_WIDTH 1 /* HPOUT1L_RMV_SHORT */
+#define WM8993_HPOUT1L_OUTP 0x0040 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_OUTP_MASK 0x0040 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_OUTP_SHIFT 6 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_OUTP_WIDTH 1 /* HPOUT1L_OUTP */
+#define WM8993_HPOUT1L_DLY 0x0020 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1L_DLY_MASK 0x0020 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1L_DLY_SHIFT 5 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1L_DLY_WIDTH 1 /* HPOUT1L_DLY */
+#define WM8993_HPOUT1R_RMV_SHORT 0x0008 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_RMV_SHORT_MASK 0x0008 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_RMV_SHORT_SHIFT 3 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_RMV_SHORT_WIDTH 1 /* HPOUT1R_RMV_SHORT */
+#define WM8993_HPOUT1R_OUTP 0x0004 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_OUTP_MASK 0x0004 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_OUTP_SHIFT 2 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_OUTP_WIDTH 1 /* HPOUT1R_OUTP */
+#define WM8993_HPOUT1R_DLY 0x0002 /* HPOUT1R_DLY */
+#define WM8993_HPOUT1R_DLY_MASK 0x0002 /* HPOUT1R_DLY */
+#define WM8993_HPOUT1R_DLY_SHIFT 1 /* HPOUT1R_DLY */
+#define WM8993_HPOUT1R_DLY_WIDTH 1 /* HPOUT1R_DLY */
+
+/*
+ * R98 (0x62) - EQ1
+ */
+#define WM8993_EQ_ENA 0x0001 /* EQ_ENA */
+#define WM8993_EQ_ENA_MASK 0x0001 /* EQ_ENA */
+#define WM8993_EQ_ENA_SHIFT 0 /* EQ_ENA */
+#define WM8993_EQ_ENA_WIDTH 1 /* EQ_ENA */
+
+/*
+ * R99 (0x63) - EQ2
+ */
+#define WM8993_EQ_B1_GAIN_MASK 0x001F /* EQ_B1_GAIN - [4:0] */
+#define WM8993_EQ_B1_GAIN_SHIFT 0 /* EQ_B1_GAIN - [4:0] */
+#define WM8993_EQ_B1_GAIN_WIDTH 5 /* EQ_B1_GAIN - [4:0] */
+
+/*
+ * R100 (0x64) - EQ3
+ */
+#define WM8993_EQ_B2_GAIN_MASK 0x001F /* EQ_B2_GAIN - [4:0] */
+#define WM8993_EQ_B2_GAIN_SHIFT 0 /* EQ_B2_GAIN - [4:0] */
+#define WM8993_EQ_B2_GAIN_WIDTH 5 /* EQ_B2_GAIN - [4:0] */
+
+/*
+ * R101 (0x65) - EQ4
+ */
+#define WM8993_EQ_B3_GAIN_MASK 0x001F /* EQ_B3_GAIN - [4:0] */
+#define WM8993_EQ_B3_GAIN_SHIFT 0 /* EQ_B3_GAIN - [4:0] */
+#define WM8993_EQ_B3_GAIN_WIDTH 5 /* EQ_B3_GAIN - [4:0] */
+
+/*
+ * R102 (0x66) - EQ5
+ */
+#define WM8993_EQ_B4_GAIN_MASK 0x001F /* EQ_B4_GAIN - [4:0] */
+#define WM8993_EQ_B4_GAIN_SHIFT 0 /* EQ_B4_GAIN - [4:0] */
+#define WM8993_EQ_B4_GAIN_WIDTH 5 /* EQ_B4_GAIN - [4:0] */
+
+/*
+ * R103 (0x67) - EQ6
+ */
+#define WM8993_EQ_B5_GAIN_MASK 0x001F /* EQ_B5_GAIN - [4:0] */
+#define WM8993_EQ_B5_GAIN_SHIFT 0 /* EQ_B5_GAIN - [4:0] */
+#define WM8993_EQ_B5_GAIN_WIDTH 5 /* EQ_B5_GAIN - [4:0] */
+
+/*
+ * R104 (0x68) - EQ7
+ */
+#define WM8993_EQ_B1_A_MASK 0xFFFF /* EQ_B1_A - [15:0] */
+#define WM8993_EQ_B1_A_SHIFT 0 /* EQ_B1_A - [15:0] */
+#define WM8993_EQ_B1_A_WIDTH 16 /* EQ_B1_A - [15:0] */
+
+/*
+ * R105 (0x69) - EQ8
+ */
+#define WM8993_EQ_B1_B_MASK 0xFFFF /* EQ_B1_B - [15:0] */
+#define WM8993_EQ_B1_B_SHIFT 0 /* EQ_B1_B - [15:0] */
+#define WM8993_EQ_B1_B_WIDTH 16 /* EQ_B1_B - [15:0] */
+
+/*
+ * R106 (0x6A) - EQ9
+ */
+#define WM8993_EQ_B1_PG_MASK 0xFFFF /* EQ_B1_PG - [15:0] */
+#define WM8993_EQ_B1_PG_SHIFT 0 /* EQ_B1_PG - [15:0] */
+#define WM8993_EQ_B1_PG_WIDTH 16 /* EQ_B1_PG - [15:0] */
+
+/*
+ * R107 (0x6B) - EQ10
+ */
+#define WM8993_EQ_B2_A_MASK 0xFFFF /* EQ_B2_A - [15:0] */
+#define WM8993_EQ_B2_A_SHIFT 0 /* EQ_B2_A - [15:0] */
+#define WM8993_EQ_B2_A_WIDTH 16 /* EQ_B2_A - [15:0] */
+
+/*
+ * R108 (0x6C) - EQ11
+ */
+#define WM8993_EQ_B2_B_MASK 0xFFFF /* EQ_B2_B - [15:0] */
+#define WM8993_EQ_B2_B_SHIFT 0 /* EQ_B2_B - [15:0] */
+#define WM8993_EQ_B2_B_WIDTH 16 /* EQ_B2_B - [15:0] */
+
+/*
+ * R109 (0x6D) - EQ12
+ */
+#define WM8993_EQ_B2_C_MASK 0xFFFF /* EQ_B2_C - [15:0] */
+#define WM8993_EQ_B2_C_SHIFT 0 /* EQ_B2_C - [15:0] */
+#define WM8993_EQ_B2_C_WIDTH 16 /* EQ_B2_C - [15:0] */
+
+/*
+ * R110 (0x6E) - EQ13
+ */
+#define WM8993_EQ_B2_PG_MASK 0xFFFF /* EQ_B2_PG - [15:0] */
+#define WM8993_EQ_B2_PG_SHIFT 0 /* EQ_B2_PG - [15:0] */
+#define WM8993_EQ_B2_PG_WIDTH 16 /* EQ_B2_PG - [15:0] */
+
+/*
+ * R111 (0x6F) - EQ14
+ */
+#define WM8993_EQ_B3_A_MASK 0xFFFF /* EQ_B3_A - [15:0] */
+#define WM8993_EQ_B3_A_SHIFT 0 /* EQ_B3_A - [15:0] */
+#define WM8993_EQ_B3_A_WIDTH 16 /* EQ_B3_A - [15:0] */
+
+/*
+ * R112 (0x70) - EQ15
+ */
+#define WM8993_EQ_B3_B_MASK 0xFFFF /* EQ_B3_B - [15:0] */
+#define WM8993_EQ_B3_B_SHIFT 0 /* EQ_B3_B - [15:0] */
+#define WM8993_EQ_B3_B_WIDTH 16 /* EQ_B3_B - [15:0] */
+
+/*
+ * R113 (0x71) - EQ16
+ */
+#define WM8993_EQ_B3_C_MASK 0xFFFF /* EQ_B3_C - [15:0] */
+#define WM8993_EQ_B3_C_SHIFT 0 /* EQ_B3_C - [15:0] */
+#define WM8993_EQ_B3_C_WIDTH 16 /* EQ_B3_C - [15:0] */
+
+/*
+ * R114 (0x72) - EQ17
+ */
+#define WM8993_EQ_B3_PG_MASK 0xFFFF /* EQ_B3_PG - [15:0] */
+#define WM8993_EQ_B3_PG_SHIFT 0 /* EQ_B3_PG - [15:0] */
+#define WM8993_EQ_B3_PG_WIDTH 16 /* EQ_B3_PG - [15:0] */
+
+/*
+ * R115 (0x73) - EQ18
+ */
+#define WM8993_EQ_B4_A_MASK 0xFFFF /* EQ_B4_A - [15:0] */
+#define WM8993_EQ_B4_A_SHIFT 0 /* EQ_B4_A - [15:0] */
+#define WM8993_EQ_B4_A_WIDTH 16 /* EQ_B4_A - [15:0] */
+
+/*
+ * R116 (0x74) - EQ19
+ */
+#define WM8993_EQ_B4_B_MASK 0xFFFF /* EQ_B4_B - [15:0] */
+#define WM8993_EQ_B4_B_SHIFT 0 /* EQ_B4_B - [15:0] */
+#define WM8993_EQ_B4_B_WIDTH 16 /* EQ_B4_B - [15:0] */
+
+/*
+ * R117 (0x75) - EQ20
+ */
+#define WM8993_EQ_B4_C_MASK 0xFFFF /* EQ_B4_C - [15:0] */
+#define WM8993_EQ_B4_C_SHIFT 0 /* EQ_B4_C - [15:0] */
+#define WM8993_EQ_B4_C_WIDTH 16 /* EQ_B4_C - [15:0] */
+
+/*
+ * R118 (0x76) - EQ21
+ */
+#define WM8993_EQ_B4_PG_MASK 0xFFFF /* EQ_B4_PG - [15:0] */
+#define WM8993_EQ_B4_PG_SHIFT 0 /* EQ_B4_PG - [15:0] */
+#define WM8993_EQ_B4_PG_WIDTH 16 /* EQ_B4_PG - [15:0] */
+
+/*
+ * R119 (0x77) - EQ22
+ */
+#define WM8993_EQ_B5_A_MASK 0xFFFF /* EQ_B5_A - [15:0] */
+#define WM8993_EQ_B5_A_SHIFT 0 /* EQ_B5_A - [15:0] */
+#define WM8993_EQ_B5_A_WIDTH 16 /* EQ_B5_A - [15:0] */
+
+/*
+ * R120 (0x78) - EQ23
+ */
+#define WM8993_EQ_B5_B_MASK 0xFFFF /* EQ_B5_B - [15:0] */
+#define WM8993_EQ_B5_B_SHIFT 0 /* EQ_B5_B - [15:0] */
+#define WM8993_EQ_B5_B_WIDTH 16 /* EQ_B5_B - [15:0] */
+
+/*
+ * R121 (0x79) - EQ24
+ */
+#define WM8993_EQ_B5_PG_MASK 0xFFFF /* EQ_B5_PG - [15:0] */
+#define WM8993_EQ_B5_PG_SHIFT 0 /* EQ_B5_PG - [15:0] */
+#define WM8993_EQ_B5_PG_WIDTH 16 /* EQ_B5_PG - [15:0] */
+
+/*
+ * R122 (0x7A) - Digital Pulls
+ */
+#define WM8993_MCLK_PU 0x0080 /* MCLK_PU */
+#define WM8993_MCLK_PU_MASK 0x0080 /* MCLK_PU */
+#define WM8993_MCLK_PU_SHIFT 7 /* MCLK_PU */
+#define WM8993_MCLK_PU_WIDTH 1 /* MCLK_PU */
+#define WM8993_MCLK_PD 0x0040 /* MCLK_PD */
+#define WM8993_MCLK_PD_MASK 0x0040 /* MCLK_PD */
+#define WM8993_MCLK_PD_SHIFT 6 /* MCLK_PD */
+#define WM8993_MCLK_PD_WIDTH 1 /* MCLK_PD */
+#define WM8993_DACDAT_PU 0x0020 /* DACDAT_PU */
+#define WM8993_DACDAT_PU_MASK 0x0020 /* DACDAT_PU */
+#define WM8993_DACDAT_PU_SHIFT 5 /* DACDAT_PU */
+#define WM8993_DACDAT_PU_WIDTH 1 /* DACDAT_PU */
+#define WM8993_DACDAT_PD 0x0010 /* DACDAT_PD */
+#define WM8993_DACDAT_PD_MASK 0x0010 /* DACDAT_PD */
+#define WM8993_DACDAT_PD_SHIFT 4 /* DACDAT_PD */
+#define WM8993_DACDAT_PD_WIDTH 1 /* DACDAT_PD */
+#define WM8993_LRCLK_PU 0x0008 /* LRCLK_PU */
+#define WM8993_LRCLK_PU_MASK 0x0008 /* LRCLK_PU */
+#define WM8993_LRCLK_PU_SHIFT 3 /* LRCLK_PU */
+#define WM8993_LRCLK_PU_WIDTH 1 /* LRCLK_PU */
+#define WM8993_LRCLK_PD 0x0004 /* LRCLK_PD */
+#define WM8993_LRCLK_PD_MASK 0x0004 /* LRCLK_PD */
+#define WM8993_LRCLK_PD_SHIFT 2 /* LRCLK_PD */
+#define WM8993_LRCLK_PD_WIDTH 1 /* LRCLK_PD */
+#define WM8993_BCLK_PU 0x0002 /* BCLK_PU */
+#define WM8993_BCLK_PU_MASK 0x0002 /* BCLK_PU */
+#define WM8993_BCLK_PU_SHIFT 1 /* BCLK_PU */
+#define WM8993_BCLK_PU_WIDTH 1 /* BCLK_PU */
+#define WM8993_BCLK_PD 0x0001 /* BCLK_PD */
+#define WM8993_BCLK_PD_MASK 0x0001 /* BCLK_PD */
+#define WM8993_BCLK_PD_SHIFT 0 /* BCLK_PD */
+#define WM8993_BCLK_PD_WIDTH 1 /* BCLK_PD */
+
+/*
+ * R123 (0x7B) - DRC Control 1
+ */
+#define WM8993_DRC_ENA 0x8000 /* DRC_ENA */
+#define WM8993_DRC_ENA_MASK 0x8000 /* DRC_ENA */
+#define WM8993_DRC_ENA_SHIFT 15 /* DRC_ENA */
+#define WM8993_DRC_ENA_WIDTH 1 /* DRC_ENA */
+#define WM8993_DRC_DAC_PATH 0x4000 /* DRC_DAC_PATH */
+#define WM8993_DRC_DAC_PATH_MASK 0x4000 /* DRC_DAC_PATH */
+#define WM8993_DRC_DAC_PATH_SHIFT 14 /* DRC_DAC_PATH */
+#define WM8993_DRC_DAC_PATH_WIDTH 1 /* DRC_DAC_PATH */
+#define WM8993_DRC_SMOOTH_ENA 0x0800 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_SMOOTH_ENA_MASK 0x0800 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_SMOOTH_ENA_SHIFT 11 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_SMOOTH_ENA_WIDTH 1 /* DRC_SMOOTH_ENA */
+#define WM8993_DRC_QR_ENA 0x0400 /* DRC_QR_ENA */
+#define WM8993_DRC_QR_ENA_MASK 0x0400 /* DRC_QR_ENA */
+#define WM8993_DRC_QR_ENA_SHIFT 10 /* DRC_QR_ENA */
+#define WM8993_DRC_QR_ENA_WIDTH 1 /* DRC_QR_ENA */
+#define WM8993_DRC_ANTICLIP_ENA 0x0200 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_ANTICLIP_ENA_MASK 0x0200 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_ANTICLIP_ENA_SHIFT 9 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_ANTICLIP_ENA_WIDTH 1 /* DRC_ANTICLIP_ENA */
+#define WM8993_DRC_HYST_ENA 0x0100 /* DRC_HYST_ENA */
+#define WM8993_DRC_HYST_ENA_MASK 0x0100 /* DRC_HYST_ENA */
+#define WM8993_DRC_HYST_ENA_SHIFT 8 /* DRC_HYST_ENA */
+#define WM8993_DRC_HYST_ENA_WIDTH 1 /* DRC_HYST_ENA */
+#define WM8993_DRC_THRESH_HYST_MASK 0x0030 /* DRC_THRESH_HYST - [5:4] */
+#define WM8993_DRC_THRESH_HYST_SHIFT 4 /* DRC_THRESH_HYST - [5:4] */
+#define WM8993_DRC_THRESH_HYST_WIDTH 2 /* DRC_THRESH_HYST - [5:4] */
+#define WM8993_DRC_MINGAIN_MASK 0x000C /* DRC_MINGAIN - [3:2] */
+#define WM8993_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [3:2] */
+#define WM8993_DRC_MINGAIN_WIDTH 2 /* DRC_MINGAIN - [3:2] */
+#define WM8993_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */
+#define WM8993_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */
+#define WM8993_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R124 (0x7C) - DRC Control 2
+ */
+#define WM8993_DRC_ATTACK_RATE_MASK 0xF000 /* DRC_ATTACK_RATE - [15:12] */
+#define WM8993_DRC_ATTACK_RATE_SHIFT 12 /* DRC_ATTACK_RATE - [15:12] */
+#define WM8993_DRC_ATTACK_RATE_WIDTH 4 /* DRC_ATTACK_RATE - [15:12] */
+#define WM8993_DRC_DECAY_RATE_MASK 0x0F00 /* DRC_DECAY_RATE - [11:8] */
+#define WM8993_DRC_DECAY_RATE_SHIFT 8 /* DRC_DECAY_RATE - [11:8] */
+#define WM8993_DRC_DECAY_RATE_WIDTH 4 /* DRC_DECAY_RATE - [11:8] */
+#define WM8993_DRC_THRESH_COMP_MASK 0x00FC /* DRC_THRESH_COMP - [7:2] */
+#define WM8993_DRC_THRESH_COMP_SHIFT 2 /* DRC_THRESH_COMP - [7:2] */
+#define WM8993_DRC_THRESH_COMP_WIDTH 6 /* DRC_THRESH_COMP - [7:2] */
+
+/*
+ * R125 (0x7D) - DRC Control 3
+ */
+#define WM8993_DRC_AMP_COMP_MASK 0xF800 /* DRC_AMP_COMP - [15:11] */
+#define WM8993_DRC_AMP_COMP_SHIFT 11 /* DRC_AMP_COMP - [15:11] */
+#define WM8993_DRC_AMP_COMP_WIDTH 5 /* DRC_AMP_COMP - [15:11] */
+#define WM8993_DRC_R0_SLOPE_COMP_MASK 0x0700 /* DRC_R0_SLOPE_COMP - [10:8] */
+#define WM8993_DRC_R0_SLOPE_COMP_SHIFT 8 /* DRC_R0_SLOPE_COMP - [10:8] */
+#define WM8993_DRC_R0_SLOPE_COMP_WIDTH 3 /* DRC_R0_SLOPE_COMP - [10:8] */
+#define WM8993_DRC_FF_DELAY 0x0080 /* DRC_FF_DELAY */
+#define WM8993_DRC_FF_DELAY_MASK 0x0080 /* DRC_FF_DELAY */
+#define WM8993_DRC_FF_DELAY_SHIFT 7 /* DRC_FF_DELAY */
+#define WM8993_DRC_FF_DELAY_WIDTH 1 /* DRC_FF_DELAY */
+#define WM8993_DRC_THRESH_QR_MASK 0x000C /* DRC_THRESH_QR - [3:2] */
+#define WM8993_DRC_THRESH_QR_SHIFT 2 /* DRC_THRESH_QR - [3:2] */
+#define WM8993_DRC_THRESH_QR_WIDTH 2 /* DRC_THRESH_QR - [3:2] */
+#define WM8993_DRC_RATE_QR_MASK 0x0003 /* DRC_RATE_QR - [1:0] */
+#define WM8993_DRC_RATE_QR_SHIFT 0 /* DRC_RATE_QR - [1:0] */
+#define WM8993_DRC_RATE_QR_WIDTH 2 /* DRC_RATE_QR - [1:0] */
+
+/*
+ * R126 (0x7E) - DRC Control 4
+ */
+#define WM8993_DRC_R1_SLOPE_COMP_MASK 0xE000 /* DRC_R1_SLOPE_COMP - [15:13] */
+#define WM8993_DRC_R1_SLOPE_COMP_SHIFT 13 /* DRC_R1_SLOPE_COMP - [15:13] */
+#define WM8993_DRC_R1_SLOPE_COMP_WIDTH 3 /* DRC_R1_SLOPE_COMP - [15:13] */
+#define WM8993_DRC_STARTUP_GAIN_MASK 0x1F00 /* DRC_STARTUP_GAIN - [12:8] */
+#define WM8993_DRC_STARTUP_GAIN_SHIFT 8 /* DRC_STARTUP_GAIN - [12:8] */
+#define WM8993_DRC_STARTUP_GAIN_WIDTH 5 /* DRC_STARTUP_GAIN - [12:8] */
+
+#endif
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 86fc57e..c64e55a 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -165,87 +165,23 @@
int master;
int fll_fref;
int fll_fout;
+ int tdm_width;
struct wm9081_retune_mobile_config *retune;
};
-static int wm9081_reg_is_volatile(int reg)
+static int wm9081_volatile_register(unsigned int reg)
{
switch (reg) {
+ case WM9081_SOFTWARE_RESET:
+ return 1;
default:
return 0;
}
}
-static unsigned int wm9081_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- BUG_ON(reg > WM9081_MAX_REGISTER);
- return cache[reg];
-}
-
-static unsigned int wm9081_read_hw(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *client = codec->control_data;
-
- BUG_ON(reg > WM9081_MAX_REGISTER);
-
- /* Write register */
- xfer[0].addr = client->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = client->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret != 2) {
- dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
-static unsigned int wm9081_read(struct snd_soc_codec *codec, unsigned int reg)
-{
- if (wm9081_reg_is_volatile(reg))
- return wm9081_read_hw(codec, reg);
- else
- return wm9081_read_reg_cache(codec, reg);
-}
-
-static int wm9081_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- u8 data[3];
-
- BUG_ON(reg > WM9081_MAX_REGISTER);
-
- if (!wm9081_reg_is_volatile(reg))
- cache[reg] = value;
-
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- if (codec->hw_write(codec->control_data, data, 3) == 3)
- return 0;
- else
- return -EIO;
-}
-
static int wm9081_reset(struct snd_soc_codec *codec)
{
- return wm9081_write(codec, WM9081_SOFTWARE_RESET, 0);
+ return snd_soc_write(codec, WM9081_SOFTWARE_RESET, 0);
}
static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
@@ -356,7 +292,7 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg;
- reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+ reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
if (reg & WM9081_SPK_MODE)
ucontrol->value.integer.value[0] = 1;
else
@@ -375,8 +311,8 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- unsigned int reg_pwr = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
- unsigned int reg2 = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_2);
+ unsigned int reg_pwr = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
+ unsigned int reg2 = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_2);
/* Are we changing anything? */
if (ucontrol->value.integer.value[0] ==
@@ -397,7 +333,7 @@
reg2 &= ~WM9081_SPK_MODE;
}
- wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
+ snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_2, reg2);
return 0;
}
@@ -456,7 +392,7 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- unsigned int reg = wm9081_read(codec, WM9081_POWER_MANAGEMENT);
+ unsigned int reg = snd_soc_read(codec, WM9081_POWER_MANAGEMENT);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
@@ -468,7 +404,7 @@
break;
}
- wm9081_write(codec, WM9081_POWER_MANAGEMENT, reg);
+ snd_soc_write(codec, WM9081_POWER_MANAGEMENT, reg);
return 0;
}
@@ -607,7 +543,7 @@
if (ret != 0)
return ret;
- reg5 = wm9081_read(codec, WM9081_FLL_CONTROL_5);
+ reg5 = snd_soc_read(codec, WM9081_FLL_CONTROL_5);
reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
switch (fll_id) {
@@ -621,44 +557,44 @@
}
/* Disable CLK_SYS while we reconfigure */
- clk_sys_reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+ clk_sys_reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
if (clk_sys_reg & WM9081_CLK_SYS_ENA)
- wm9081_write(codec, WM9081_CLOCK_CONTROL_3,
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_3,
clk_sys_reg & ~WM9081_CLK_SYS_ENA);
/* Any FLL configuration change requires that the FLL be
* disabled first. */
- reg1 = wm9081_read(codec, WM9081_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM9081_FLL_CONTROL_1);
reg1 &= ~WM9081_FLL_ENA;
- wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
/* Apply the configuration */
if (fll_div.k)
reg1 |= WM9081_FLL_FRAC_MASK;
else
reg1 &= ~WM9081_FLL_FRAC_MASK;
- wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1);
- wm9081_write(codec, WM9081_FLL_CONTROL_2,
+ snd_soc_write(codec, WM9081_FLL_CONTROL_2,
(fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
(fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
- wm9081_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_3, fll_div.k);
- reg4 = wm9081_read(codec, WM9081_FLL_CONTROL_4);
+ reg4 = snd_soc_read(codec, WM9081_FLL_CONTROL_4);
reg4 &= ~WM9081_FLL_N_MASK;
reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
- wm9081_write(codec, WM9081_FLL_CONTROL_4, reg4);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_4, reg4);
reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
- wm9081_write(codec, WM9081_FLL_CONTROL_5, reg5);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_5, reg5);
/* Enable the FLL */
- wm9081_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
+ snd_soc_write(codec, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
/* Then bring CLK_SYS up again if it was disabled */
if (clk_sys_reg & WM9081_CLK_SYS_ENA)
- wm9081_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
@@ -707,6 +643,10 @@
target > 3000000)
break;
}
+
+ if (i == ARRAY_SIZE(clk_sys_rates))
+ return -EINVAL;
+
} else if (wm9081->fs) {
for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
new_sysclk = clk_sys_rates[i].ratio
@@ -714,6 +654,10 @@
if (new_sysclk > 3000000)
break;
}
+
+ if (i == ARRAY_SIZE(clk_sys_rates))
+ return -EINVAL;
+
} else {
new_sysclk = 12288000;
}
@@ -734,19 +678,19 @@
return -EINVAL;
}
- reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_1);
if (mclkdiv)
reg |= WM9081_MCLKDIV2;
else
reg &= ~WM9081_MCLKDIV2;
- wm9081_write(codec, WM9081_CLOCK_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_1, reg);
- reg = wm9081_read(codec, WM9081_CLOCK_CONTROL_3);
+ reg = snd_soc_read(codec, WM9081_CLOCK_CONTROL_3);
if (fll)
reg |= WM9081_CLK_SRC_SEL;
else
reg &= ~WM9081_CLK_SRC_SEL;
- wm9081_write(codec, WM9081_CLOCK_CONTROL_3, reg);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_3, reg);
dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
@@ -846,76 +790,76 @@
case SND_SOC_BIAS_PREPARE:
/* VMID=2*40k */
- reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+ reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
reg &= ~WM9081_VMID_SEL_MASK;
reg |= 0x2;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Normal bias current */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_STBY_BIAS_ENA;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
break;
case SND_SOC_BIAS_STANDBY:
/* Initial cold start */
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Disable LINEOUT discharge */
- reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+ reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
reg &= ~WM9081_LINEOUT_DISCH;
- wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
/* Select startup bias source */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg |= WM9081_BIAS_SRC | WM9081_BIAS_ENA;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
/* VMID 2*4k; Soft VMID ramp enable */
- reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+ reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
reg |= WM9081_VMID_RAMP | 0x6;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
mdelay(100);
/* Normal bias enable & soft start off */
reg |= WM9081_BIAS_ENA;
reg &= ~WM9081_VMID_RAMP;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Standard bias source */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_BIAS_SRC;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
}
/* VMID 2*240k */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg &= ~WM9081_VMID_SEL_MASK;
reg |= 0x40;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Standby bias current on */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg |= WM9081_STBY_BIAS_ENA;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
break;
case SND_SOC_BIAS_OFF:
/* Startup bias source */
- reg = wm9081_read(codec, WM9081_BIAS_CONTROL_1);
+ reg = snd_soc_read(codec, WM9081_BIAS_CONTROL_1);
reg |= WM9081_BIAS_SRC;
- wm9081_write(codec, WM9081_BIAS_CONTROL_1, reg);
+ snd_soc_write(codec, WM9081_BIAS_CONTROL_1, reg);
/* Disable VMID and biases with soft ramping */
- reg = wm9081_read(codec, WM9081_VMID_CONTROL);
+ reg = snd_soc_read(codec, WM9081_VMID_CONTROL);
reg &= ~(WM9081_VMID_SEL_MASK | WM9081_BIAS_ENA);
reg |= WM9081_VMID_RAMP;
- wm9081_write(codec, WM9081_VMID_CONTROL, reg);
+ snd_soc_write(codec, WM9081_VMID_CONTROL, reg);
/* Actively discharge LINEOUT */
- reg = wm9081_read(codec, WM9081_ANTI_POP_CONTROL);
+ reg = snd_soc_read(codec, WM9081_ANTI_POP_CONTROL);
reg |= WM9081_LINEOUT_DISCH;
- wm9081_write(codec, WM9081_ANTI_POP_CONTROL, reg);
+ snd_soc_write(codec, WM9081_ANTI_POP_CONTROL, reg);
break;
}
@@ -929,7 +873,7 @@
{
struct snd_soc_codec *codec = dai->codec;
struct wm9081_priv *wm9081 = codec->private_data;
- unsigned int aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+ unsigned int aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
@@ -1010,7 +954,7 @@
return -EINVAL;
}
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
return 0;
}
@@ -1024,47 +968,51 @@
int ret, i, best, best_val, cur_val;
unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
- clk_ctrl2 = wm9081_read(codec, WM9081_CLOCK_CONTROL_2);
+ clk_ctrl2 = snd_soc_read(codec, WM9081_CLOCK_CONTROL_2);
clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
- aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+ aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
- aif2 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_2);
+ aif2 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_2);
aif2 &= ~WM9081_AIF_WL_MASK;
- aif3 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_3);
+ aif3 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_3);
aif3 &= ~WM9081_BCLK_DIV_MASK;
- aif4 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_4);
+ aif4 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_4);
aif4 &= ~WM9081_LRCLK_RATE_MASK;
- /* What BCLK do we need? */
wm9081->fs = params_rate(params);
- wm9081->bclk = 2 * wm9081->fs;
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- wm9081->bclk *= 16;
- break;
- case SNDRV_PCM_FORMAT_S20_3LE:
- wm9081->bclk *= 20;
- aif2 |= 0x4;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- wm9081->bclk *= 24;
- aif2 |= 0x8;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- wm9081->bclk *= 32;
- aif2 |= 0xc;
- break;
- default:
- return -EINVAL;
- }
- if (aif1 & WM9081_AIFDAC_TDM_MODE_MASK) {
+ if (wm9081->tdm_width) {
+ /* If TDM is set up then that fixes our BCLK. */
int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
- wm9081->bclk *= slots;
+
+ wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots;
+ } else {
+ /* Otherwise work out a BCLK from the sample size */
+ wm9081->bclk = 2 * wm9081->fs;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wm9081->bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wm9081->bclk *= 20;
+ aif2 |= 0x4;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wm9081->bclk *= 24;
+ aif2 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wm9081->bclk *= 32;
+ aif2 |= 0xc;
+ break;
+ default:
+ return -EINVAL;
+ }
}
dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm9081->bclk);
@@ -1149,22 +1097,22 @@
s->name, s->rate);
/* If the EQ is enabled then disable it while we write out */
- eq1 = wm9081_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
+ eq1 = snd_soc_read(codec, WM9081_EQ_1) & WM9081_EQ_ENA;
if (eq1 & WM9081_EQ_ENA)
- wm9081_write(codec, WM9081_EQ_1, 0);
+ snd_soc_write(codec, WM9081_EQ_1, 0);
/* Write out the other values */
for (i = 1; i < ARRAY_SIZE(s->config); i++)
- wm9081_write(codec, WM9081_EQ_1 + i, s->config[i]);
+ snd_soc_write(codec, WM9081_EQ_1 + i, s->config[i]);
eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
- wm9081_write(codec, WM9081_EQ_1, eq1);
+ snd_soc_write(codec, WM9081_EQ_1, eq1);
}
- wm9081_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_2, aif2);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_3, aif3);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_4, aif4);
return 0;
}
@@ -1174,14 +1122,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm9081_read(codec, WM9081_DAC_DIGITAL_2);
+ reg = snd_soc_read(codec, WM9081_DAC_DIGITAL_2);
if (mute)
reg |= WM9081_DAC_MUTE;
else
reg &= ~WM9081_DAC_MUTE;
- wm9081_write(codec, WM9081_DAC_DIGITAL_2, reg);
+ snd_soc_write(codec, WM9081_DAC_DIGITAL_2, reg);
return 0;
}
@@ -1207,19 +1155,25 @@
}
static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots)
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct snd_soc_codec *codec = dai->codec;
- unsigned int aif1 = wm9081_read(codec, WM9081_AUDIO_INTERFACE_1);
+ struct wm9081_priv *wm9081 = codec->private_data;
+ unsigned int aif1 = snd_soc_read(codec, WM9081_AUDIO_INTERFACE_1);
aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
- if (slots < 1 || slots > 4)
+ if (slots < 0 || slots > 4)
return -EINVAL;
+ wm9081->tdm_width = slot_width;
+
+ if (slots == 0)
+ slots = 1;
+
aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
- switch (mask) {
+ switch (rx_mask) {
case 1:
break;
case 2:
@@ -1235,7 +1189,7 @@
return -EINVAL;
}
- wm9081_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM9081_AUDIO_INTERFACE_1, aif1);
return 0;
}
@@ -1357,7 +1311,7 @@
if (i == WM9081_SOFTWARE_RESET)
continue;
- wm9081_write(codec, i, reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -1377,7 +1331,8 @@
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm9081);
-static int wm9081_register(struct wm9081_priv *wm9081)
+static int wm9081_register(struct wm9081_priv *wm9081,
+ enum snd_soc_control_type control)
{
struct snd_soc_codec *codec = &wm9081->codec;
int ret;
@@ -1396,19 +1351,24 @@
codec->private_data = wm9081;
codec->name = "WM9081";
codec->owner = THIS_MODULE;
- codec->read = wm9081_read;
- codec->write = wm9081_write;
codec->dai = &wm9081_dai;
codec->num_dai = 1;
codec->reg_cache_size = ARRAY_SIZE(wm9081->reg_cache);
codec->reg_cache = &wm9081->reg_cache;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm9081_set_bias_level;
+ codec->volatile_register = wm9081_volatile_register;
memcpy(codec->reg_cache, wm9081_reg_defaults,
sizeof(wm9081_reg_defaults));
- reg = wm9081_read_hw(codec, WM9081_SOFTWARE_RESET);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ reg = snd_soc_read(codec, WM9081_SOFTWARE_RESET);
if (reg != 0x9081) {
dev_err(codec->dev, "Device is not a WM9081: ID=0x%x\n", reg);
ret = -EINVAL;
@@ -1424,10 +1384,10 @@
wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Enable zero cross by default */
- reg = wm9081_read(codec, WM9081_ANALOGUE_LINEOUT);
- wm9081_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
- reg = wm9081_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
- wm9081_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
+ reg = snd_soc_read(codec, WM9081_ANALOGUE_LINEOUT);
+ snd_soc_write(codec, WM9081_ANALOGUE_LINEOUT, reg | WM9081_LINEOUTZC);
+ reg = snd_soc_read(codec, WM9081_ANALOGUE_SPEAKER_PGA);
+ snd_soc_write(codec, WM9081_ANALOGUE_SPEAKER_PGA,
reg | WM9081_SPKPGAZC);
wm9081_dai.dev = codec->dev;
@@ -1482,7 +1442,7 @@
codec->dev = &i2c->dev;
- return wm9081_register(wm9081);
+ return wm9081_register(wm9081, SND_SOC_I2C);
}
static __devexit int wm9081_i2c_remove(struct i2c_client *client)
@@ -1492,6 +1452,21 @@
return 0;
}
+#ifdef CONFIG_PM
+static int wm9081_i2c_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ return snd_soc_suspend_device(&client->dev);
+}
+
+static int wm9081_i2c_resume(struct i2c_client *client)
+{
+ return snd_soc_resume_device(&client->dev);
+}
+#else
+#define wm9081_i2c_suspend NULL
+#define wm9081_i2c_resume NULL
+#endif
+
static const struct i2c_device_id wm9081_i2c_id[] = {
{ "wm9081", 0 },
{ }
@@ -1505,6 +1480,8 @@
},
.probe = wm9081_i2c_probe,
.remove = __devexit_p(wm9081_i2c_remove),
+ .suspend = wm9081_i2c_suspend,
+ .resume = wm9081_i2c_resume,
.id_table = wm9081_i2c_id,
};
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index fa88b46..e7d2840 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -406,7 +406,7 @@
ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm9705: failed to register card\n");
- goto pcm_err;
+ goto reset_err;
}
return 0;
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
new file mode 100644
index 0000000..e542027
--- /dev/null
+++ b/sound/soc/codecs/wm_hubs.c
@@ -0,0 +1,743 @@
+/*
+ * wm_hubs.c -- WM8993/4 common code
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8993.h"
+#include "wm_hubs.h"
+
+const DECLARE_TLV_DB_SCALE(wm_hubs_spkmix_tlv, -300, 300, 0);
+EXPORT_SYMBOL_GPL(wm_hubs_spkmix_tlv);
+
+static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1650, 150, 0);
+static const DECLARE_TLV_DB_SCALE(inmix_sw_tlv, 0, 3000, 0);
+static const DECLARE_TLV_DB_SCALE(inmix_tlv, -1500, 300, 1);
+static const DECLARE_TLV_DB_SCALE(earpiece_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(outmix_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1);
+static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0);
+static const unsigned int spkboost_tlv[] = {
+ TLV_DB_RANGE_HEAD(7),
+ 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
+ 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(line_tlv, -600, 600, 0);
+
+static const char *speaker_ref_text[] = {
+ "SPKVDD/2",
+ "VMID",
+};
+
+static const struct soc_enum speaker_ref =
+ SOC_ENUM_SINGLE(WM8993_SPEAKER_MIXER, 8, 2, speaker_ref_text);
+
+static const char *speaker_mode_text[] = {
+ "Class D",
+ "Class AB",
+};
+
+static const struct soc_enum speaker_mode =
+ SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
+
+static void wait_for_dc_servo(struct snd_soc_codec *codec)
+{
+ unsigned int reg;
+ int count = 0;
+
+ dev_dbg(codec->dev, "Waiting for DC servo...\n");
+ do {
+ count++;
+ msleep(1);
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
+ dev_dbg(codec->dev, "DC servo status: %x\n", reg);
+ } while ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
+ != WM8993_DCS_CAL_COMPLETE_MASK && count < 1000);
+
+ if ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
+ != WM8993_DCS_CAL_COMPLETE_MASK)
+ dev_err(codec->dev, "Timed out waiting for DC Servo\n");
+}
+
+/*
+ * Update the DC servo calibration on gain changes
+ */
+static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+
+ /* Only need to do this if the outputs are active */
+ if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1)
+ & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
+ snd_soc_update_bits(codec,
+ WM8993_DC_SERVO_0,
+ WM8993_DCS_TRIG_SINGLE_0 |
+ WM8993_DCS_TRIG_SINGLE_1,
+ WM8993_DCS_TRIG_SINGLE_0 |
+ WM8993_DCS_TRIG_SINGLE_1);
+
+ return ret;
+}
+
+static const struct snd_kcontrol_new analogue_snd_controls[] = {
+SOC_SINGLE_TLV("IN1L Volume", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN1L Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN1L ZC Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("IN1R Volume", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN1R Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN1R ZC Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 0),
+
+
+SOC_SINGLE_TLV("IN2L Volume", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN2L Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN2L ZC Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("IN2R Volume", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN2R Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN2R ZC Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("MIXINL IN2L Volume", WM8993_INPUT_MIXER3, 7, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINL IN1L Volume", WM8993_INPUT_MIXER3, 4, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINL Output Record Volume", WM8993_INPUT_MIXER3, 0, 7, 0,
+ inmix_tlv),
+SOC_SINGLE_TLV("MIXINL IN1LP Volume", WM8993_INPUT_MIXER5, 6, 7, 0, inmix_tlv),
+SOC_SINGLE_TLV("MIXINL Direct Voice Volume", WM8993_INPUT_MIXER5, 0, 6, 0,
+ inmix_tlv),
+
+SOC_SINGLE_TLV("MIXINR IN2R Volume", WM8993_INPUT_MIXER4, 7, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINR IN1R Volume", WM8993_INPUT_MIXER4, 4, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINR Output Record Volume", WM8993_INPUT_MIXER4, 0, 7, 0,
+ inmix_tlv),
+SOC_SINGLE_TLV("MIXINR IN1RP Volume", WM8993_INPUT_MIXER6, 6, 7, 0, inmix_tlv),
+SOC_SINGLE_TLV("MIXINR Direct Voice Volume", WM8993_INPUT_MIXER6, 0, 6, 0,
+ inmix_tlv),
+
+SOC_SINGLE_TLV("Left Output Mixer IN2RN Volume", WM8993_OUTPUT_MIXER5, 6, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN2LN Volume", WM8993_OUTPUT_MIXER3, 6, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN2LP Volume", WM8993_OUTPUT_MIXER3, 9, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN1L Volume", WM8993_OUTPUT_MIXER3, 0, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN1R Volume", WM8993_OUTPUT_MIXER3, 3, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer Right Input Volume",
+ WM8993_OUTPUT_MIXER5, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer Left Input Volume",
+ WM8993_OUTPUT_MIXER5, 0, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer DAC Volume", WM8993_OUTPUT_MIXER5, 9, 7, 1,
+ outmix_tlv),
+
+SOC_SINGLE_TLV("Right Output Mixer IN2LN Volume",
+ WM8993_OUTPUT_MIXER6, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN2RN Volume",
+ WM8993_OUTPUT_MIXER4, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN1L Volume",
+ WM8993_OUTPUT_MIXER4, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN1R Volume",
+ WM8993_OUTPUT_MIXER4, 0, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN2RP Volume",
+ WM8993_OUTPUT_MIXER4, 9, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Left Input Volume",
+ WM8993_OUTPUT_MIXER6, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Right Input Volume",
+ WM8993_OUTPUT_MIXER6, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer DAC Volume",
+ WM8993_OUTPUT_MIXER6, 9, 7, 1, outmix_tlv),
+
+SOC_DOUBLE_R_TLV("Output Volume", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 0, 63, 0, outpga_tlv),
+SOC_DOUBLE_R("Output Switch", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 6, 1, 0),
+SOC_DOUBLE_R("Output ZC Switch", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 7, 1, 0),
+
+SOC_SINGLE("Earpiece Switch", WM8993_HPOUT2_VOLUME, 5, 1, 1),
+SOC_SINGLE_TLV("Earpiece Volume", WM8993_HPOUT2_VOLUME, 4, 1, 1, earpiece_tlv),
+
+SOC_SINGLE_TLV("SPKL Input Volume", WM8993_SPKMIXL_ATTENUATION,
+ 5, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKL IN1LP Volume", WM8993_SPKMIXL_ATTENUATION,
+ 4, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKL Output Volume", WM8993_SPKMIXL_ATTENUATION,
+ 3, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_SINGLE_TLV("SPKR Input Volume", WM8993_SPKMIXR_ATTENUATION,
+ 5, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKR IN1RP Volume", WM8993_SPKMIXR_ATTENUATION,
+ 4, 1, 1, wm_hubs_spkmix_tlv),
+SOC_SINGLE_TLV("SPKR Output Volume", WM8993_SPKMIXR_ATTENUATION,
+ 3, 1, 1, wm_hubs_spkmix_tlv),
+
+SOC_DOUBLE_R_TLV("Speaker Mixer Volume",
+ WM8993_SPKMIXL_ATTENUATION, WM8993_SPKMIXR_ATTENUATION,
+ 0, 3, 1, spkmixout_tlv),
+SOC_DOUBLE_R_TLV("Speaker Volume",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 0, 63, 0, outpga_tlv),
+SOC_DOUBLE_R("Speaker Switch",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 6, 1, 0),
+SOC_DOUBLE_R("Speaker ZC Switch",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 7, 1, 0),
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+ spkboost_tlv),
+SOC_ENUM("Speaker Reference", speaker_ref),
+SOC_ENUM("Speaker Mode", speaker_mode),
+
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .tlv.p = outpga_tlv,
+ .info = snd_soc_info_volsw_2r,
+ .get = snd_soc_get_volsw_2r, .put = wm8993_put_dc_servo,
+ .private_value = (unsigned long)&(struct soc_mixer_control) {
+ .reg = WM8993_LEFT_OUTPUT_VOLUME,
+ .rreg = WM8993_RIGHT_OUTPUT_VOLUME,
+ .shift = 0, .max = 63
+ },
+},
+SOC_DOUBLE_R("Headphone Switch", WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_RIGHT_OUTPUT_VOLUME, 6, 1, 0),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_RIGHT_OUTPUT_VOLUME, 7, 1, 0),
+
+SOC_SINGLE("LINEOUT1N Switch", WM8993_LINE_OUTPUTS_VOLUME, 6, 1, 1),
+SOC_SINGLE("LINEOUT1P Switch", WM8993_LINE_OUTPUTS_VOLUME, 5, 1, 1),
+SOC_SINGLE_TLV("LINEOUT1 Volume", WM8993_LINE_OUTPUTS_VOLUME, 4, 1, 1,
+ line_tlv),
+
+SOC_SINGLE("LINEOUT2N Switch", WM8993_LINE_OUTPUTS_VOLUME, 2, 1, 1),
+SOC_SINGLE("LINEOUT2P Switch", WM8993_LINE_OUTPUTS_VOLUME, 1, 1, 1),
+SOC_SINGLE_TLV("LINEOUT2 Volume", WM8993_LINE_OUTPUTS_VOLUME, 0, 1, 1,
+ line_tlv),
+};
+
+static int hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ unsigned int reg = snd_soc_read(codec, WM8993_ANALOGUE_HP_0);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, WM8993_CP_ENA);
+
+ msleep(5);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA);
+
+ reg |= WM8993_HPOUT1L_DLY | WM8993_HPOUT1R_DLY;
+ snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
+
+ /* Start the DC servo */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ 0xFFFF,
+ WM8993_DCS_ENA_CHAN_0 |
+ WM8993_DCS_ENA_CHAN_1 |
+ WM8993_DCS_TRIG_STARTUP_1 |
+ WM8993_DCS_TRIG_STARTUP_0);
+ wait_for_dc_servo(codec);
+
+ reg |= WM8993_HPOUT1R_OUTP | WM8993_HPOUT1R_RMV_SHORT |
+ WM8993_HPOUT1L_OUTP | WM8993_HPOUT1L_RMV_SHORT;
+ snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ reg &= ~(WM8993_HPOUT1L_RMV_SHORT |
+ WM8993_HPOUT1L_DLY |
+ WM8993_HPOUT1L_OUTP |
+ WM8993_HPOUT1R_RMV_SHORT |
+ WM8993_HPOUT1R_DLY |
+ WM8993_HPOUT1R_OUTP);
+
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ 0xffff, 0);
+
+ snd_soc_write(codec, WM8993_ANALOGUE_HP_0, reg);
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
+ 0);
+
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static int earpiece_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *control, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 reg = snd_soc_read(codec, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ reg |= WM8993_HPOUT2_IN_ENA;
+ snd_soc_write(codec, WM8993_ANTIPOP1, reg);
+ udelay(50);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ snd_soc_write(codec, WM8993_ANTIPOP1, reg);
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new in1l_pga[] = {
+SOC_DAPM_SINGLE("IN1LP Switch", WM8993_INPUT_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("IN1LN Switch", WM8993_INPUT_MIXER2, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new in1r_pga[] = {
+SOC_DAPM_SINGLE("IN1RP Switch", WM8993_INPUT_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1RN Switch", WM8993_INPUT_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new in2l_pga[] = {
+SOC_DAPM_SINGLE("IN2LP Switch", WM8993_INPUT_MIXER2, 7, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_INPUT_MIXER2, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new in2r_pga[] = {
+SOC_DAPM_SINGLE("IN2RP Switch", WM8993_INPUT_MIXER2, 3, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_INPUT_MIXER2, 2, 1, 0),
+};
+
+static const struct snd_kcontrol_new mixinl[] = {
+SOC_DAPM_SINGLE("IN2L Switch", WM8993_INPUT_MIXER3, 8, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_INPUT_MIXER3, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new mixinr[] = {
+SOC_DAPM_SINGLE("IN2R Switch", WM8993_INPUT_MIXER4, 8, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_INPUT_MIXER4, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_output_mixer[] = {
+SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER1, 7, 1, 0),
+SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER1, 6, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER1, 5, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER1, 4, 1, 0),
+SOC_DAPM_SINGLE("IN2LP Switch", WM8993_OUTPUT_MIXER1, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER1, 3, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER1, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_output_mixer[] = {
+SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER2, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER2, 6, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER2, 4, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER2, 3, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN2RP Switch", WM8993_OUTPUT_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new earpiece_mixer[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_HPOUT2_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_HPOUT2_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_HPOUT2_MIXER, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_speaker_boost[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_SPKOUT_MIXERS, 5, 1, 0),
+SOC_DAPM_SINGLE("SPKL Switch", WM8993_SPKOUT_MIXERS, 4, 1, 0),
+SOC_DAPM_SINGLE("SPKR Switch", WM8993_SPKOUT_MIXERS, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_boost[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_SPKOUT_MIXERS, 2, 1, 0),
+SOC_DAPM_SINGLE("SPKL Switch", WM8993_SPKOUT_MIXERS, 1, 1, 0),
+SOC_DAPM_SINGLE("SPKR Switch", WM8993_SPKOUT_MIXERS, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1_mix[] = {
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER1, 2, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER1, 1, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1n_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 6, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER1, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1p_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2_mix[] = {
+SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2n_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 6, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2p_mix[] = {
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget analogue_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1LN"),
+SND_SOC_DAPM_INPUT("IN1LP"),
+SND_SOC_DAPM_INPUT("IN2LN"),
+SND_SOC_DAPM_INPUT("IN2LP/VXRN"),
+SND_SOC_DAPM_INPUT("IN1RN"),
+SND_SOC_DAPM_INPUT("IN1RP"),
+SND_SOC_DAPM_INPUT("IN2RN"),
+SND_SOC_DAPM_INPUT("IN2RP/VXRP"),
+
+SND_SOC_DAPM_MICBIAS("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0),
+SND_SOC_DAPM_MICBIAS("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0),
+
+SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0,
+ in1l_pga, ARRAY_SIZE(in1l_pga)),
+SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0,
+ in1r_pga, ARRAY_SIZE(in1r_pga)),
+
+SND_SOC_DAPM_MIXER("IN2L PGA", WM8993_POWER_MANAGEMENT_2, 7, 0,
+ in2l_pga, ARRAY_SIZE(in2l_pga)),
+SND_SOC_DAPM_MIXER("IN2R PGA", WM8993_POWER_MANAGEMENT_2, 5, 0,
+ in2r_pga, ARRAY_SIZE(in2r_pga)),
+
+/* Dummy widgets to represent differential paths */
+SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("MIXINL", WM8993_POWER_MANAGEMENT_2, 9, 0,
+ mixinl, ARRAY_SIZE(mixinl)),
+SND_SOC_DAPM_MIXER("MIXINR", WM8993_POWER_MANAGEMENT_2, 8, 0,
+ mixinr, ARRAY_SIZE(mixinr)),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8993_POWER_MANAGEMENT_3, 5, 0,
+ left_output_mixer, ARRAY_SIZE(left_output_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8993_POWER_MANAGEMENT_3, 4, 0,
+ right_output_mixer, ARRAY_SIZE(right_output_mixer)),
+
+SND_SOC_DAPM_PGA("Left Output PGA", WM8993_POWER_MANAGEMENT_3, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Output PGA", WM8993_POWER_MANAGEMENT_3, 6, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_E("Headphone PGA", SND_SOC_NOPM, 0, 0,
+ NULL, 0,
+ hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
+ earpiece_mixer, ARRAY_SIZE(earpiece_mixer)),
+SND_SOC_DAPM_PGA_E("Earpiece Driver", WM8993_POWER_MANAGEMENT_1, 11, 0,
+ NULL, 0, earpiece_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_MIXER("SPKL Boost", SND_SOC_NOPM, 0, 0,
+ left_speaker_boost, ARRAY_SIZE(left_speaker_boost)),
+SND_SOC_DAPM_MIXER("SPKR Boost", SND_SOC_NOPM, 0, 0,
+ right_speaker_boost, ARRAY_SIZE(right_speaker_boost)),
+
+SND_SOC_DAPM_PGA("SPKL Driver", WM8993_POWER_MANAGEMENT_1, 12, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("SPKR Driver", WM8993_POWER_MANAGEMENT_1, 13, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_MIXER("LINEOUT1 Mixer", SND_SOC_NOPM, 0, 0,
+ line1_mix, ARRAY_SIZE(line1_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2 Mixer", SND_SOC_NOPM, 0, 0,
+ line2_mix, ARRAY_SIZE(line2_mix)),
+
+SND_SOC_DAPM_MIXER("LINEOUT1N Mixer", SND_SOC_NOPM, 0, 0,
+ line1n_mix, ARRAY_SIZE(line1n_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT1P Mixer", SND_SOC_NOPM, 0, 0,
+ line1p_mix, ARRAY_SIZE(line1p_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2N Mixer", SND_SOC_NOPM, 0, 0,
+ line2n_mix, ARRAY_SIZE(line2n_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2P Mixer", SND_SOC_NOPM, 0, 0,
+ line2p_mix, ARRAY_SIZE(line2p_mix)),
+
+SND_SOC_DAPM_PGA("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("SPKOUTLP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTLN"),
+SND_SOC_DAPM_OUTPUT("SPKOUTRP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTRN"),
+SND_SOC_DAPM_OUTPUT("HPOUT1L"),
+SND_SOC_DAPM_OUTPUT("HPOUT1R"),
+SND_SOC_DAPM_OUTPUT("HPOUT2P"),
+SND_SOC_DAPM_OUTPUT("HPOUT2N"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1P"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1N"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2P"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2N"),
+};
+
+static const struct snd_soc_dapm_route analogue_routes[] = {
+ { "IN1L PGA", "IN1LP Switch", "IN1LP" },
+ { "IN1L PGA", "IN1LN Switch", "IN1LN" },
+
+ { "IN1R PGA", "IN1RP Switch", "IN1RP" },
+ { "IN1R PGA", "IN1RN Switch", "IN1RN" },
+
+ { "IN2L PGA", "IN2LP Switch", "IN2LP/VXRN" },
+ { "IN2L PGA", "IN2LN Switch", "IN2LN" },
+
+ { "IN2R PGA", "IN2RP Switch", "IN2RP/VXRP" },
+ { "IN2R PGA", "IN2RN Switch", "IN2RN" },
+
+ { "Direct Voice", NULL, "IN2LP/VXRN" },
+ { "Direct Voice", NULL, "IN2RP/VXRP" },
+
+ { "MIXINL", "IN1L Switch", "IN1L PGA" },
+ { "MIXINL", "IN2L Switch", "IN2L PGA" },
+ { "MIXINL", NULL, "Direct Voice" },
+ { "MIXINL", NULL, "IN1LP" },
+ { "MIXINL", NULL, "Left Output Mixer" },
+
+ { "MIXINR", "IN1R Switch", "IN1R PGA" },
+ { "MIXINR", "IN2R Switch", "IN2R PGA" },
+ { "MIXINR", NULL, "Direct Voice" },
+ { "MIXINR", NULL, "IN1RP" },
+ { "MIXINR", NULL, "Right Output Mixer" },
+
+ { "ADCL", NULL, "MIXINL" },
+ { "ADCR", NULL, "MIXINR" },
+
+ { "Left Output Mixer", "Left Input Switch", "MIXINL" },
+ { "Left Output Mixer", "Right Input Switch", "MIXINR" },
+ { "Left Output Mixer", "IN2RN Switch", "IN2RN" },
+ { "Left Output Mixer", "IN2LN Switch", "IN2LN" },
+ { "Left Output Mixer", "IN2LP Switch", "IN2LP/VXRN" },
+ { "Left Output Mixer", "IN1L Switch", "IN1L PGA" },
+ { "Left Output Mixer", "IN1R Switch", "IN1R PGA" },
+
+ { "Right Output Mixer", "Left Input Switch", "MIXINL" },
+ { "Right Output Mixer", "Right Input Switch", "MIXINR" },
+ { "Right Output Mixer", "IN2LN Switch", "IN2LN" },
+ { "Right Output Mixer", "IN2RN Switch", "IN2RN" },
+ { "Right Output Mixer", "IN2RP Switch", "IN2RP/VXRP" },
+ { "Right Output Mixer", "IN1L Switch", "IN1L PGA" },
+ { "Right Output Mixer", "IN1R Switch", "IN1R PGA" },
+
+ { "Left Output PGA", NULL, "Left Output Mixer" },
+ { "Left Output PGA", NULL, "TOCLK" },
+
+ { "Right Output PGA", NULL, "Right Output Mixer" },
+ { "Right Output PGA", NULL, "TOCLK" },
+
+ { "Earpiece Mixer", "Direct Voice Switch", "Direct Voice" },
+ { "Earpiece Mixer", "Left Output Switch", "Left Output PGA" },
+ { "Earpiece Mixer", "Right Output Switch", "Right Output PGA" },
+
+ { "Earpiece Driver", NULL, "Earpiece Mixer" },
+ { "HPOUT2N", NULL, "Earpiece Driver" },
+ { "HPOUT2P", NULL, "Earpiece Driver" },
+
+ { "SPKL", "Input Switch", "MIXINL" },
+ { "SPKL", "IN1LP Switch", "IN1LP" },
+ { "SPKL", "Output Switch", "Left Output Mixer" },
+ { "SPKL", NULL, "TOCLK" },
+
+ { "SPKR", "Input Switch", "MIXINR" },
+ { "SPKR", "IN1RP Switch", "IN1RP" },
+ { "SPKR", "Output Switch", "Right Output Mixer" },
+ { "SPKR", NULL, "TOCLK" },
+
+ { "SPKL Boost", "Direct Voice Switch", "Direct Voice" },
+ { "SPKL Boost", "SPKL Switch", "SPKL" },
+ { "SPKL Boost", "SPKR Switch", "SPKR" },
+
+ { "SPKR Boost", "Direct Voice Switch", "Direct Voice" },
+ { "SPKR Boost", "SPKR Switch", "SPKR" },
+ { "SPKR Boost", "SPKL Switch", "SPKL" },
+
+ { "SPKL Driver", NULL, "SPKL Boost" },
+ { "SPKL Driver", NULL, "CLK_SYS" },
+
+ { "SPKR Driver", NULL, "SPKR Boost" },
+ { "SPKR Driver", NULL, "CLK_SYS" },
+
+ { "SPKOUTLP", NULL, "SPKL Driver" },
+ { "SPKOUTLN", NULL, "SPKL Driver" },
+ { "SPKOUTRP", NULL, "SPKR Driver" },
+ { "SPKOUTRN", NULL, "SPKR Driver" },
+
+ { "Left Headphone Mux", "Mixer", "Left Output Mixer" },
+ { "Right Headphone Mux", "Mixer", "Right Output Mixer" },
+
+ { "Headphone PGA", NULL, "Left Headphone Mux" },
+ { "Headphone PGA", NULL, "Right Headphone Mux" },
+ { "Headphone PGA", NULL, "CLK_SYS" },
+
+ { "HPOUT1L", NULL, "Headphone PGA" },
+ { "HPOUT1R", NULL, "Headphone PGA" },
+
+ { "LINEOUT1N", NULL, "LINEOUT1N Driver" },
+ { "LINEOUT1P", NULL, "LINEOUT1P Driver" },
+ { "LINEOUT2N", NULL, "LINEOUT2N Driver" },
+ { "LINEOUT2P", NULL, "LINEOUT2P Driver" },
+};
+
+static const struct snd_soc_dapm_route lineout1_diff_routes[] = {
+ { "LINEOUT1 Mixer", "IN1L Switch", "IN1L PGA" },
+ { "LINEOUT1 Mixer", "IN1R Switch", "IN1R PGA" },
+ { "LINEOUT1 Mixer", "Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1N Driver", NULL, "LINEOUT1 Mixer" },
+ { "LINEOUT1P Driver", NULL, "LINEOUT1 Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout1_se_routes[] = {
+ { "LINEOUT1N Mixer", "Left Output Switch", "Left Output Mixer" },
+ { "LINEOUT1N Mixer", "Right Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1P Mixer", "Left Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" },
+ { "LINEOUT1P Driver", NULL, "LINEOUT1P Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
+ { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
+ { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
+ { "LINEOUT2 Mixer", "Output Switch", "Right Output Mixer" },
+
+ { "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },
+ { "LINEOUT2P Driver", NULL, "LINEOUT2 Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout2_se_routes[] = {
+ { "LINEOUT2N Mixer", "Left Output Switch", "Left Output Mixer" },
+ { "LINEOUT2N Mixer", "Right Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT2P Mixer", "Right Output Switch", "Right Output Mixer" },
+
+ { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" },
+ { "LINEOUT2P Driver", NULL, "LINEOUT2P Mixer" },
+};
+
+int wm_hubs_add_analogue_controls(struct snd_soc_codec *codec)
+{
+ /* Latch volume update bits & default ZC on */
+ snd_soc_update_bits(codec, WM8993_LEFT_LINE_INPUT_1_2_VOLUME,
+ WM8993_IN1_VU, WM8993_IN1_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_LINE_INPUT_1_2_VOLUME,
+ WM8993_IN1_VU, WM8993_IN1_VU);
+ snd_soc_update_bits(codec, WM8993_LEFT_LINE_INPUT_3_4_VOLUME,
+ WM8993_IN2_VU, WM8993_IN2_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_LINE_INPUT_3_4_VOLUME,
+ WM8993_IN2_VU, WM8993_IN2_VU);
+
+ snd_soc_update_bits(codec, WM8993_SPEAKER_VOLUME_RIGHT,
+ WM8993_SPKOUT_VU, WM8993_SPKOUT_VU);
+
+ snd_soc_update_bits(codec, WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_HPOUT1L_ZC, WM8993_HPOUT1L_ZC);
+ snd_soc_update_bits(codec, WM8993_RIGHT_OUTPUT_VOLUME,
+ WM8993_HPOUT1_VU | WM8993_HPOUT1R_ZC,
+ WM8993_HPOUT1_VU | WM8993_HPOUT1R_ZC);
+
+ snd_soc_update_bits(codec, WM8993_LEFT_OPGA_VOLUME,
+ WM8993_MIXOUTL_ZC, WM8993_MIXOUTL_ZC);
+ snd_soc_update_bits(codec, WM8993_RIGHT_OPGA_VOLUME,
+ WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU,
+ WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU);
+
+ snd_soc_add_controls(codec, analogue_snd_controls,
+ ARRAY_SIZE(analogue_snd_controls));
+
+ snd_soc_dapm_new_controls(codec, analogue_dapm_widgets,
+ ARRAY_SIZE(analogue_dapm_widgets));
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_controls);
+
+int wm_hubs_add_analogue_routes(struct snd_soc_codec *codec,
+ int lineout1_diff, int lineout2_diff)
+{
+ snd_soc_dapm_add_routes(codec, analogue_routes,
+ ARRAY_SIZE(analogue_routes));
+
+ if (lineout1_diff)
+ snd_soc_dapm_add_routes(codec,
+ lineout1_diff_routes,
+ ARRAY_SIZE(lineout1_diff_routes));
+ else
+ snd_soc_dapm_add_routes(codec,
+ lineout1_se_routes,
+ ARRAY_SIZE(lineout1_se_routes));
+
+ if (lineout2_diff)
+ snd_soc_dapm_add_routes(codec,
+ lineout2_diff_routes,
+ ARRAY_SIZE(lineout2_diff_routes));
+ else
+ snd_soc_dapm_add_routes(codec,
+ lineout2_se_routes,
+ ARRAY_SIZE(lineout2_se_routes));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_routes);
+
+MODULE_DESCRIPTION("Shared support for Wolfson hubs products");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h
new file mode 100644
index 0000000..ec09cb6
--- /dev/null
+++ b/sound/soc/codecs/wm_hubs.h
@@ -0,0 +1,24 @@
+/*
+ * wm_hubs.h -- WM899x common code
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM_HUBS_H
+#define _WM_HUBS_H
+
+struct snd_soc_codec;
+
+extern const unsigned int wm_hubs_spkmix_tlv[];
+
+extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *);
+extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int);
+
+#endif
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index 411a710..4dfd4ad 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -9,6 +9,9 @@
config SND_DAVINCI_SOC_I2S
tristate
+config SND_DAVINCI_SOC_MCASP
+ tristate
+
config SND_DAVINCI_SOC_EVM
tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
depends on SND_DAVINCI_SOC
@@ -19,6 +22,16 @@
Say Y if you want to add support for SoC audio on TI
DaVinci DM6446 or DM355 EVM platforms.
+config SND_DM6467_SOC_EVM
+ tristate "SoC Audio support for DaVinci DM6467 EVM"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_DM6467_EVM
+ select SND_DAVINCI_SOC_MCASP
+ select SND_SOC_TLV320AIC3X
+ select SND_SOC_SPDIF
+
+ help
+ Say Y if you want to add support for SoC audio on TI
+
config SND_DAVINCI_SOC_SFFSDR
tristate "SoC Audio support for SFFSDR"
depends on SND_DAVINCI_SOC && MACH_SFFSDR
@@ -28,3 +41,23 @@
help
Say Y if you want to add support for SoC audio on
Lyrtech SFFSDR board.
+
+config SND_DA830_SOC_EVM
+ tristate "SoC Audio support for DA830/OMAP-L137 EVM"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA830_EVM
+ select SND_DAVINCI_SOC_MCASP
+ select SND_SOC_TLV320AIC3X
+
+ help
+ Say Y if you want to add support for SoC audio on TI
+ DA830/OMAP-L137 EVM
+
+config SND_DA850_SOC_EVM
+ tristate "SoC Audio support for DA850/OMAP-L138 EVM"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA850_EVM
+ select SND_DAVINCI_SOC_MCASP
+ select SND_SOC_TLV320AIC3X
+ help
+ Say Y if you want to add support for SoC audio on TI
+ DA850/OMAP-L138 EVM
+
diff --git a/sound/soc/davinci/Makefile b/sound/soc/davinci/Makefile
index ca8bae1..a6939d7 100644
--- a/sound/soc/davinci/Makefile
+++ b/sound/soc/davinci/Makefile
@@ -1,13 +1,18 @@
# DAVINCI Platform Support
snd-soc-davinci-objs := davinci-pcm.o
snd-soc-davinci-i2s-objs := davinci-i2s.o
+snd-soc-davinci-mcasp-objs:= davinci-mcasp.o
obj-$(CONFIG_SND_DAVINCI_SOC) += snd-soc-davinci.o
obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o
+obj-$(CONFIG_SND_DAVINCI_SOC_MCASP) += snd-soc-davinci-mcasp.o
# DAVINCI Machine Support
snd-soc-evm-objs := davinci-evm.o
snd-soc-sffsdr-objs := davinci-sffsdr.o
obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DM6467_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DA830_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DA850_SOC_EVM) += snd-soc-evm.o
obj-$(CONFIG_SND_DAVINCI_SOC_SFFSDR) += snd-soc-sffsdr.o
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 58fd1cb..67414f6 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -14,6 +14,7 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
@@ -27,9 +28,10 @@
#include <mach/mux.h>
#include "../codecs/tlv320aic3x.h"
+#include "../codecs/spdif_transciever.h"
#include "davinci-pcm.h"
#include "davinci-i2s.h"
-
+#include "davinci-mcasp.h"
#define AUDIO_FORMAT (SND_SOC_DAIFMT_DSP_B | \
SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF)
@@ -43,7 +45,7 @@
unsigned sysclk;
/* ASP1 on DM355 EVM is clocked by an external oscillator */
- if (machine_is_davinci_dm355_evm())
+ if (machine_is_davinci_dm355_evm() || machine_is_davinci_dm6467_evm())
sysclk = 27000000;
/* ASP0 in DM6446 EVM is clocked by U55, as configured by
@@ -53,6 +55,10 @@
else if (machine_is_davinci_evm())
sysclk = 12288000;
+ else if (machine_is_davinci_da830_evm() ||
+ machine_is_davinci_da850_evm())
+ sysclk = 24576000;
+
else
return -EINVAL;
@@ -144,6 +150,32 @@
.ops = &evm_ops,
};
+static struct snd_soc_dai_link dm6467_evm_dai[] = {
+ {
+ .name = "TLV320AIC3X",
+ .stream_name = "AIC3X",
+ .cpu_dai = &davinci_mcasp_dai[DAVINCI_MCASP_I2S_DAI],
+ .codec_dai = &aic3x_dai,
+ .init = evm_aic3x_init,
+ .ops = &evm_ops,
+ },
+ {
+ .name = "McASP",
+ .stream_name = "spdif",
+ .cpu_dai = &davinci_mcasp_dai[DAVINCI_MCASP_DIT_DAI],
+ .codec_dai = &dit_stub_dai,
+ .ops = &evm_ops,
+ },
+};
+static struct snd_soc_dai_link da8xx_evm_dai = {
+ .name = "TLV320AIC3X",
+ .stream_name = "AIC3X",
+ .cpu_dai = &davinci_mcasp_dai[DAVINCI_MCASP_I2S_DAI],
+ .codec_dai = &aic3x_dai,
+ .init = evm_aic3x_init,
+ .ops = &evm_ops,
+};
+
/* davinci-evm audio machine driver */
static struct snd_soc_card snd_soc_card_evm = {
.name = "DaVinci EVM",
@@ -152,73 +184,80 @@
.num_links = 1,
};
-/* evm audio private data */
-static struct aic3x_setup_data evm_aic3x_setup = {
- .i2c_bus = 1,
- .i2c_address = 0x1b,
+/* davinci dm6467 evm audio machine driver */
+static struct snd_soc_card dm6467_snd_soc_card_evm = {
+ .name = "DaVinci DM6467 EVM",
+ .platform = &davinci_soc_platform,
+ .dai_link = dm6467_evm_dai,
+ .num_links = ARRAY_SIZE(dm6467_evm_dai),
};
+static struct snd_soc_card da830_snd_soc_card = {
+ .name = "DA830/OMAP-L137 EVM",
+ .dai_link = &da8xx_evm_dai,
+ .platform = &davinci_soc_platform,
+ .num_links = 1,
+};
+
+static struct snd_soc_card da850_snd_soc_card = {
+ .name = "DA850/OMAP-L138 EVM",
+ .dai_link = &da8xx_evm_dai,
+ .platform = &davinci_soc_platform,
+ .num_links = 1,
+};
+
+static struct aic3x_setup_data aic3x_setup;
+
/* evm audio subsystem */
static struct snd_soc_device evm_snd_devdata = {
.card = &snd_soc_card_evm,
.codec_dev = &soc_codec_dev_aic3x,
- .codec_data = &evm_aic3x_setup,
+ .codec_data = &aic3x_setup,
};
-/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
-static struct resource evm_snd_resources[] = {
- {
- .start = DAVINCI_ASP0_BASE,
- .end = DAVINCI_ASP0_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
+/* evm audio subsystem */
+static struct snd_soc_device dm6467_evm_snd_devdata = {
+ .card = &dm6467_snd_soc_card_evm,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &aic3x_setup,
};
-static struct evm_snd_platform_data evm_snd_data = {
- .tx_dma_ch = DAVINCI_DMA_ASP0_TX,
- .rx_dma_ch = DAVINCI_DMA_ASP0_RX,
+/* evm audio subsystem */
+static struct snd_soc_device da830_evm_snd_devdata = {
+ .card = &da830_snd_soc_card,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &aic3x_setup,
};
-/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-static struct resource dm335evm_snd_resources[] = {
- {
- .start = DAVINCI_ASP1_BASE,
- .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct evm_snd_platform_data dm335evm_snd_data = {
- .tx_dma_ch = DAVINCI_DMA_ASP1_TX,
- .rx_dma_ch = DAVINCI_DMA_ASP1_RX,
+static struct snd_soc_device da850_evm_snd_devdata = {
+ .card = &da850_snd_soc_card,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &aic3x_setup,
};
static struct platform_device *evm_snd_device;
static int __init evm_init(void)
{
- struct resource *resources;
- unsigned num_resources;
- struct evm_snd_platform_data *data;
+ struct snd_soc_device *evm_snd_dev_data;
int index;
int ret;
if (machine_is_davinci_evm()) {
- davinci_cfg_reg(DM644X_MCBSP);
-
- resources = evm_snd_resources;
- num_resources = ARRAY_SIZE(evm_snd_resources);
- data = &evm_snd_data;
+ evm_snd_dev_data = &evm_snd_devdata;
index = 0;
} else if (machine_is_davinci_dm355_evm()) {
- /* we don't use ASP1 IRQs, or we'd need to mux them ... */
- davinci_cfg_reg(DM355_EVT8_ASP1_TX);
- davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
- resources = dm335evm_snd_resources;
- num_resources = ARRAY_SIZE(dm335evm_snd_resources);
- data = &dm335evm_snd_data;
+ evm_snd_dev_data = &evm_snd_devdata;
index = 1;
+ } else if (machine_is_davinci_dm6467_evm()) {
+ evm_snd_dev_data = &dm6467_evm_snd_devdata;
+ index = 0;
+ } else if (machine_is_davinci_da830_evm()) {
+ evm_snd_dev_data = &da830_evm_snd_devdata;
+ index = 1;
+ } else if (machine_is_davinci_da850_evm()) {
+ evm_snd_dev_data = &da850_evm_snd_devdata;
+ index = 0;
} else
return -EINVAL;
@@ -226,17 +265,8 @@
if (!evm_snd_device)
return -ENOMEM;
- platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
- evm_snd_devdata.dev = &evm_snd_device->dev;
- platform_device_add_data(evm_snd_device, data, sizeof(*data));
-
- ret = platform_device_add_resources(evm_snd_device, resources,
- num_resources);
- if (ret) {
- platform_device_put(evm_snd_device);
- return ret;
- }
-
+ platform_set_drvdata(evm_snd_device, evm_snd_dev_data);
+ evm_snd_dev_data->dev = &evm_snd_device->dev;
ret = platform_device_add(evm_snd_device);
if (ret)
platform_device_put(evm_snd_device);
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index b1ea52f..12a6c54 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -22,6 +22,8 @@
#include <sound/initval.h>
#include <sound/soc.h>
+#include <mach/asp.h>
+
#include "davinci-pcm.h"
@@ -63,6 +65,7 @@
#define DAVINCI_MCBSP_RCR_RWDLEN1(v) ((v) << 5)
#define DAVINCI_MCBSP_RCR_RFRLEN1(v) ((v) << 8)
#define DAVINCI_MCBSP_RCR_RDATDLY(v) ((v) << 16)
+#define DAVINCI_MCBSP_RCR_RFIG (1 << 18)
#define DAVINCI_MCBSP_RCR_RWDLEN2(v) ((v) << 21)
#define DAVINCI_MCBSP_XCR_XWDLEN1(v) ((v) << 5)
@@ -85,14 +88,6 @@
#define DAVINCI_MCBSP_PCR_FSRM (1 << 10)
#define DAVINCI_MCBSP_PCR_FSXM (1 << 11)
-#define MOD_REG_BIT(val, mask, set) do { \
- if (set) { \
- val |= mask; \
- } else { \
- val &= ~mask; \
- } \
-} while (0)
-
enum {
DAVINCI_MCBSP_WORD_8 = 0,
DAVINCI_MCBSP_WORD_12,
@@ -112,6 +107,10 @@
struct davinci_mcbsp_dev {
void __iomem *base;
+#define MOD_DSP_A 0
+#define MOD_DSP_B 1
+ int mode;
+ u32 pcr;
struct clk *clk;
struct davinci_pcm_dma_params *dma_params[2];
};
@@ -127,96 +126,100 @@
return __raw_readl(dev->base + reg);
}
-static void davinci_mcbsp_start(struct snd_pcm_substream *substream)
+static void toggle_clock(struct davinci_mcbsp_dev *dev, int playback)
+{
+ u32 m = playback ? DAVINCI_MCBSP_PCR_CLKXP : DAVINCI_MCBSP_PCR_CLKRP;
+ /* The clock needs to toggle to complete reset.
+ * So, fake it by toggling the clk polarity.
+ */
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, dev->pcr ^ m);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, dev->pcr);
+}
+
+static void davinci_mcbsp_start(struct davinci_mcbsp_dev *dev,
+ struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_platform *platform = socdev->card->platform;
- u32 w;
- int ret;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ u32 spcr;
+ u32 mask = playback ? DAVINCI_MCBSP_SPCR_XRST : DAVINCI_MCBSP_SPCR_RRST;
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ if (spcr & mask) {
+ /* start off disabled */
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG,
+ spcr & ~mask);
+ toggle_clock(dev, playback);
+ }
+ if (dev->pcr & (DAVINCI_MCBSP_PCR_FSXM | DAVINCI_MCBSP_PCR_FSRM |
+ DAVINCI_MCBSP_PCR_CLKXM | DAVINCI_MCBSP_PCR_CLKRM)) {
+ /* Start the sample generator */
+ spcr |= DAVINCI_MCBSP_SPCR_GRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
+ }
- /* Start the sample generator and enable transmitter/receiver */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (playback) {
/* Stop the DMA to avoid data loss */
/* while the transmitter is out of reset to handle XSYNCERR */
if (platform->pcm_ops->trigger) {
- ret = platform->pcm_ops->trigger(substream,
+ int ret = platform->pcm_ops->trigger(substream,
SNDRV_PCM_TRIGGER_STOP);
if (ret < 0)
printk(KERN_DEBUG "Playback DMA stop failed\n");
}
/* Enable the transmitter */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr |= DAVINCI_MCBSP_SPCR_XRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
/* wait for any unexpected frame sync error to occur */
udelay(100);
/* Disable the transmitter to clear any outstanding XSYNCERR */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 0);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr &= ~DAVINCI_MCBSP_SPCR_XRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
+ toggle_clock(dev, playback);
/* Restart the DMA */
if (platform->pcm_ops->trigger) {
- ret = platform->pcm_ops->trigger(substream,
+ int ret = platform->pcm_ops->trigger(substream,
SNDRV_PCM_TRIGGER_START);
if (ret < 0)
printk(KERN_DEBUG "Playback DMA start failed\n");
}
- /* Enable the transmitter */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
-
- } else {
-
- /* Enable the reciever */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
}
+ /* Enable transmitter or receiver */
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr |= mask;
- /* Start frame sync */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_FRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ if (dev->pcr & (DAVINCI_MCBSP_PCR_FSXM | DAVINCI_MCBSP_PCR_FSRM)) {
+ /* Start frame sync */
+ spcr |= DAVINCI_MCBSP_SPCR_FRST;
+ }
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
}
-static void davinci_mcbsp_stop(struct snd_pcm_substream *substream)
+static void davinci_mcbsp_stop(struct davinci_mcbsp_dev *dev, int playback)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
- u32 w;
+ u32 spcr;
/* Reset transmitter/receiver and sample rate/frame sync generators */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST |
- DAVINCI_MCBSP_SPCR_FRST, 0);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 0);
- else
- MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 0);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr &= ~(DAVINCI_MCBSP_SPCR_GRST | DAVINCI_MCBSP_SPCR_FRST);
+ spcr &= playback ? ~DAVINCI_MCBSP_SPCR_XRST : ~DAVINCI_MCBSP_SPCR_RRST;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
+ toggle_clock(dev, playback);
}
static int davinci_i2s_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
+ struct snd_soc_dai *cpu_dai)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
-
+ struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
cpu_dai->dma_data = dev->dma_params[substream->stream];
-
return 0;
}
@@ -228,12 +231,11 @@
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
unsigned int pcr;
unsigned int srgr;
- unsigned int rcr;
- unsigned int xcr;
srgr = DAVINCI_MCBSP_SRGR_FSGM |
DAVINCI_MCBSP_SRGR_FPER(DEFAULT_BITPERSAMPLE * 2 - 1) |
DAVINCI_MCBSP_SRGR_FWID(DEFAULT_BITPERSAMPLE - 1);
+ /* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* cpu is master */
@@ -258,11 +260,8 @@
return -EINVAL;
}
- rcr = DAVINCI_MCBSP_RCR_RFRLEN1(1);
- xcr = DAVINCI_MCBSP_XCR_XFIG | DAVINCI_MCBSP_XCR_XFRLEN1(1);
+ /* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_DSP_B:
- break;
case SND_SOC_DAIFMT_I2S:
/* Davinci doesn't support TRUE I2S, but some codecs will have
* the left and right channels contiguous. This allows
@@ -282,8 +281,10 @@
*/
fmt ^= SND_SOC_DAIFMT_NB_IF;
case SND_SOC_DAIFMT_DSP_A:
- rcr |= DAVINCI_MCBSP_RCR_RDATDLY(1);
- xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
+ dev->mode = MOD_DSP_A;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ dev->mode = MOD_DSP_B;
break;
default:
printk(KERN_ERR "%s:bad format\n", __func__);
@@ -343,9 +344,8 @@
return -EINVAL;
}
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
+ dev->pcr = pcr;
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, pcr);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, rcr);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, xcr);
return 0;
}
@@ -353,31 +353,40 @@
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
- struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
+ struct davinci_pcm_dma_params *dma_params = dai->dma_data;
+ struct davinci_mcbsp_dev *dev = dai->private_data;
struct snd_interval *i = NULL;
int mcbsp_word_length;
- u32 w;
+ unsigned int rcr, xcr, srgr;
+ u32 spcr;
/* general line settings */
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- w |= DAVINCI_MCBSP_SPCR_RINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr |= DAVINCI_MCBSP_SPCR_RINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
} else {
- w |= DAVINCI_MCBSP_SPCR_XINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ spcr |= DAVINCI_MCBSP_SPCR_XINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
}
i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS);
- w = DAVINCI_MCBSP_SRGR_FSGM;
- MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1), 1);
+ srgr = DAVINCI_MCBSP_SRGR_FSGM;
+ srgr |= DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1);
i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_FRAME_BITS);
- MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, w);
+ srgr |= DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
+ rcr = DAVINCI_MCBSP_RCR_RFIG;
+ xcr = DAVINCI_MCBSP_XCR_XFIG;
+ if (dev->mode == MOD_DSP_B) {
+ rcr |= DAVINCI_MCBSP_RCR_RDATDLY(0);
+ xcr |= DAVINCI_MCBSP_XCR_XDATDLY(0);
+ } else {
+ rcr |= DAVINCI_MCBSP_RCR_RDATDLY(1);
+ xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
+ }
/* Determine xfer data type */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
@@ -397,18 +406,31 @@
return -EINVAL;
}
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_RCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
- DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, w);
+ dma_params->acnt = dma_params->data_type;
+ rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(1);
+ xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(1);
- } else {
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_XCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) |
- DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, w);
+ rcr |= DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
+ DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length);
+ xcr |= DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) |
+ DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, xcr);
+ else
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, rcr);
+ return 0;
+}
+
+static int davinci_i2s_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct davinci_mcbsp_dev *dev = dai->private_data;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ davinci_mcbsp_stop(dev, playback);
+ if ((dev->pcr & DAVINCI_MCBSP_PCR_FSXM) == 0) {
+ /* codec is master */
+ davinci_mcbsp_start(dev, substream);
}
return 0;
}
@@ -416,35 +438,72 @@
static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
+ struct davinci_mcbsp_dev *dev = dai->private_data;
int ret = 0;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ if ((dev->pcr & DAVINCI_MCBSP_PCR_FSXM) == 0)
+ return 0; /* return if codec is master */
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- davinci_mcbsp_start(substream);
+ davinci_mcbsp_start(dev, substream);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- davinci_mcbsp_stop(substream);
+ davinci_mcbsp_stop(dev, playback);
break;
default:
ret = -EINVAL;
}
-
return ret;
}
-static int davinci_i2s_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
+ struct davinci_mcbsp_dev *dev = dai->private_data;
+ int playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ davinci_mcbsp_stop(dev, playback);
+}
+
+#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000
+
+static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
+ .startup = davinci_i2s_startup,
+ .shutdown = davinci_i2s_shutdown,
+ .prepare = davinci_i2s_prepare,
+ .trigger = davinci_i2s_trigger,
+ .hw_params = davinci_i2s_hw_params,
+ .set_fmt = davinci_i2s_set_dai_fmt,
+
+};
+
+struct snd_soc_dai davinci_i2s_dai = {
+ .name = "davinci-i2s",
+ .id = 0,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_I2S_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_I2S_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = &davinci_i2s_dai_ops,
+
+};
+EXPORT_SYMBOL_GPL(davinci_i2s_dai);
+
+static int davinci_i2s_probe(struct platform_device *pdev)
+{
+ struct snd_platform_data *pdata = pdev->dev.platform_data;
struct davinci_mcbsp_dev *dev;
- struct resource *mem, *ioarea;
- struct evm_snd_platform_data *pdata;
+ struct resource *mem, *ioarea, *res;
int ret;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -466,8 +525,6 @@
goto err_release_region;
}
- cpu_dai->private_data = dev;
-
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
ret = -ENODEV;
@@ -476,18 +533,37 @@
clk_enable(dev->clk);
dev->base = (void __iomem *)IO_ADDRESS(mem->start);
- pdata = pdev->dev.platform_data;
dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out;
- dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = pdata->tx_dma_ch;
dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr =
(dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG);
dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in;
- dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = pdata->rx_dma_ch;
dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr =
(dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG);
+ /* first TX, then RX */
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ ret = -ENXIO;
+ goto err_free_mem;
+ }
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ ret = -ENXIO;
+ goto err_free_mem;
+ }
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = res->start;
+
+ davinci_i2s_dai.private_data = dev;
+ ret = snd_soc_register_dai(&davinci_i2s_dai);
+ if (ret != 0)
+ goto err_free_mem;
+
return 0;
err_free_mem:
@@ -498,62 +574,40 @@
return ret;
}
-static void davinci_i2s_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int davinci_i2s_remove(struct platform_device *pdev)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
- struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
+ struct davinci_mcbsp_dev *dev = davinci_i2s_dai.private_data;
struct resource *mem;
+ snd_soc_unregister_dai(&davinci_i2s_dai);
clk_disable(dev->clk);
clk_put(dev->clk);
dev->clk = NULL;
-
kfree(dev);
-
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, (mem->end - mem->start) + 1);
+
+ return 0;
}
-#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000
-
-static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
- .startup = davinci_i2s_startup,
- .trigger = davinci_i2s_trigger,
- .hw_params = davinci_i2s_hw_params,
- .set_fmt = davinci_i2s_set_dai_fmt,
+static struct platform_driver davinci_mcbsp_driver = {
+ .probe = davinci_i2s_probe,
+ .remove = davinci_i2s_remove,
+ .driver = {
+ .name = "davinci-asp",
+ .owner = THIS_MODULE,
+ },
};
-struct snd_soc_dai davinci_i2s_dai = {
- .name = "davinci-i2s",
- .id = 0,
- .probe = davinci_i2s_probe,
- .remove = davinci_i2s_remove,
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = DAVINCI_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .rates = DAVINCI_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .ops = &davinci_i2s_dai_ops,
-};
-EXPORT_SYMBOL_GPL(davinci_i2s_dai);
-
static int __init davinci_i2s_init(void)
{
- return snd_soc_register_dai(&davinci_i2s_dai);
+ return platform_driver_register(&davinci_mcbsp_driver);
}
module_init(davinci_i2s_init);
static void __exit davinci_i2s_exit(void)
{
- snd_soc_unregister_dai(&davinci_i2s_dai);
+ platform_driver_unregister(&davinci_mcbsp_driver);
}
module_exit(davinci_i2s_exit);
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
new file mode 100644
index 0000000..eca22d7
--- /dev/null
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -0,0 +1,973 @@
+/*
+ * ALSA SoC McASP Audio Layer for TI DAVINCI processor
+ *
+ * Multi-channel Audio Serial Port Driver
+ *
+ * Author: Nirmal Pandey <n-pandey@ti.com>,
+ * Suresh Rajashekara <suresh.r@ti.com>
+ * Steve Chen <schen@.mvista.com>
+ *
+ * Copyright: (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright: (C) 2009 Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "davinci-pcm.h"
+#include "davinci-mcasp.h"
+
+/*
+ * McASP register definitions
+ */
+#define DAVINCI_MCASP_PID_REG 0x00
+#define DAVINCI_MCASP_PWREMUMGT_REG 0x04
+
+#define DAVINCI_MCASP_PFUNC_REG 0x10
+#define DAVINCI_MCASP_PDIR_REG 0x14
+#define DAVINCI_MCASP_PDOUT_REG 0x18
+#define DAVINCI_MCASP_PDSET_REG 0x1c
+
+#define DAVINCI_MCASP_PDCLR_REG 0x20
+
+#define DAVINCI_MCASP_TLGC_REG 0x30
+#define DAVINCI_MCASP_TLMR_REG 0x34
+
+#define DAVINCI_MCASP_GBLCTL_REG 0x44
+#define DAVINCI_MCASP_AMUTE_REG 0x48
+#define DAVINCI_MCASP_LBCTL_REG 0x4c
+
+#define DAVINCI_MCASP_TXDITCTL_REG 0x50
+
+#define DAVINCI_MCASP_GBLCTLR_REG 0x60
+#define DAVINCI_MCASP_RXMASK_REG 0x64
+#define DAVINCI_MCASP_RXFMT_REG 0x68
+#define DAVINCI_MCASP_RXFMCTL_REG 0x6c
+
+#define DAVINCI_MCASP_ACLKRCTL_REG 0x70
+#define DAVINCI_MCASP_AHCLKRCTL_REG 0x74
+#define DAVINCI_MCASP_RXTDM_REG 0x78
+#define DAVINCI_MCASP_EVTCTLR_REG 0x7c
+
+#define DAVINCI_MCASP_RXSTAT_REG 0x80
+#define DAVINCI_MCASP_RXTDMSLOT_REG 0x84
+#define DAVINCI_MCASP_RXCLKCHK_REG 0x88
+#define DAVINCI_MCASP_REVTCTL_REG 0x8c
+
+#define DAVINCI_MCASP_GBLCTLX_REG 0xa0
+#define DAVINCI_MCASP_TXMASK_REG 0xa4
+#define DAVINCI_MCASP_TXFMT_REG 0xa8
+#define DAVINCI_MCASP_TXFMCTL_REG 0xac
+
+#define DAVINCI_MCASP_ACLKXCTL_REG 0xb0
+#define DAVINCI_MCASP_AHCLKXCTL_REG 0xb4
+#define DAVINCI_MCASP_TXTDM_REG 0xb8
+#define DAVINCI_MCASP_EVTCTLX_REG 0xbc
+
+#define DAVINCI_MCASP_TXSTAT_REG 0xc0
+#define DAVINCI_MCASP_TXTDMSLOT_REG 0xc4
+#define DAVINCI_MCASP_TXCLKCHK_REG 0xc8
+#define DAVINCI_MCASP_XEVTCTL_REG 0xcc
+
+/* Left(even TDM Slot) Channel Status Register File */
+#define DAVINCI_MCASP_DITCSRA_REG 0x100
+/* Right(odd TDM slot) Channel Status Register File */
+#define DAVINCI_MCASP_DITCSRB_REG 0x118
+/* Left(even TDM slot) User Data Register File */
+#define DAVINCI_MCASP_DITUDRA_REG 0x130
+/* Right(odd TDM Slot) User Data Register File */
+#define DAVINCI_MCASP_DITUDRB_REG 0x148
+
+/* Serializer n Control Register */
+#define DAVINCI_MCASP_XRSRCTL_BASE_REG 0x180
+#define DAVINCI_MCASP_XRSRCTL_REG(n) (DAVINCI_MCASP_XRSRCTL_BASE_REG + \
+ (n << 2))
+
+/* Transmit Buffer for Serializer n */
+#define DAVINCI_MCASP_TXBUF_REG 0x200
+/* Receive Buffer for Serializer n */
+#define DAVINCI_MCASP_RXBUF_REG 0x280
+
+/* McASP FIFO Registers */
+#define DAVINCI_MCASP_WFIFOCTL (0x1010)
+#define DAVINCI_MCASP_WFIFOSTS (0x1014)
+#define DAVINCI_MCASP_RFIFOCTL (0x1018)
+#define DAVINCI_MCASP_RFIFOSTS (0x101C)
+
+/*
+ * DAVINCI_MCASP_PWREMUMGT_REG - Power Down and Emulation Management
+ * Register Bits
+ */
+#define MCASP_FREE BIT(0)
+#define MCASP_SOFT BIT(1)
+
+/*
+ * DAVINCI_MCASP_PFUNC_REG - Pin Function / GPIO Enable Register Bits
+ */
+#define AXR(n) (1<<n)
+#define PFUNC_AMUTE BIT(25)
+#define ACLKX BIT(26)
+#define AHCLKX BIT(27)
+#define AFSX BIT(28)
+#define ACLKR BIT(29)
+#define AHCLKR BIT(30)
+#define AFSR BIT(31)
+
+/*
+ * DAVINCI_MCASP_PDIR_REG - Pin Direction Register Bits
+ */
+#define AXR(n) (1<<n)
+#define PDIR_AMUTE BIT(25)
+#define ACLKX BIT(26)
+#define AHCLKX BIT(27)
+#define AFSX BIT(28)
+#define ACLKR BIT(29)
+#define AHCLKR BIT(30)
+#define AFSR BIT(31)
+
+/*
+ * DAVINCI_MCASP_TXDITCTL_REG - Transmit DIT Control Register Bits
+ */
+#define DITEN BIT(0) /* Transmit DIT mode enable/disable */
+#define VA BIT(2)
+#define VB BIT(3)
+
+/*
+ * DAVINCI_MCASP_TXFMT_REG - Transmit Bitstream Format Register Bits
+ */
+#define TXROT(val) (val)
+#define TXSEL BIT(3)
+#define TXSSZ(val) (val<<4)
+#define TXPBIT(val) (val<<8)
+#define TXPAD(val) (val<<13)
+#define TXORD BIT(15)
+#define FSXDLY(val) (val<<16)
+
+/*
+ * DAVINCI_MCASP_RXFMT_REG - Receive Bitstream Format Register Bits
+ */
+#define RXROT(val) (val)
+#define RXSEL BIT(3)
+#define RXSSZ(val) (val<<4)
+#define RXPBIT(val) (val<<8)
+#define RXPAD(val) (val<<13)
+#define RXORD BIT(15)
+#define FSRDLY(val) (val<<16)
+
+/*
+ * DAVINCI_MCASP_TXFMCTL_REG - Transmit Frame Control Register Bits
+ */
+#define FSXPOL BIT(0)
+#define AFSXE BIT(1)
+#define FSXDUR BIT(4)
+#define FSXMOD(val) (val<<7)
+
+/*
+ * DAVINCI_MCASP_RXFMCTL_REG - Receive Frame Control Register Bits
+ */
+#define FSRPOL BIT(0)
+#define AFSRE BIT(1)
+#define FSRDUR BIT(4)
+#define FSRMOD(val) (val<<7)
+
+/*
+ * DAVINCI_MCASP_ACLKXCTL_REG - Transmit Clock Control Register Bits
+ */
+#define ACLKXDIV(val) (val)
+#define ACLKXE BIT(5)
+#define TX_ASYNC BIT(6)
+#define ACLKXPOL BIT(7)
+
+/*
+ * DAVINCI_MCASP_ACLKRCTL_REG Receive Clock Control Register Bits
+ */
+#define ACLKRDIV(val) (val)
+#define ACLKRE BIT(5)
+#define RX_ASYNC BIT(6)
+#define ACLKRPOL BIT(7)
+
+/*
+ * DAVINCI_MCASP_AHCLKXCTL_REG - High Frequency Transmit Clock Control
+ * Register Bits
+ */
+#define AHCLKXDIV(val) (val)
+#define AHCLKXPOL BIT(14)
+#define AHCLKXE BIT(15)
+
+/*
+ * DAVINCI_MCASP_AHCLKRCTL_REG - High Frequency Receive Clock Control
+ * Register Bits
+ */
+#define AHCLKRDIV(val) (val)
+#define AHCLKRPOL BIT(14)
+#define AHCLKRE BIT(15)
+
+/*
+ * DAVINCI_MCASP_XRSRCTL_BASE_REG - Serializer Control Register Bits
+ */
+#define MODE(val) (val)
+#define DISMOD (val)(val<<2)
+#define TXSTATE BIT(4)
+#define RXSTATE BIT(5)
+
+/*
+ * DAVINCI_MCASP_LBCTL_REG - Loop Back Control Register Bits
+ */
+#define LBEN BIT(0)
+#define LBORD BIT(1)
+#define LBGENMODE(val) (val<<2)
+
+/*
+ * DAVINCI_MCASP_TXTDMSLOT_REG - Transmit TDM Slot Register configuration
+ */
+#define TXTDMS(n) (1<<n)
+
+/*
+ * DAVINCI_MCASP_RXTDMSLOT_REG - Receive TDM Slot Register configuration
+ */
+#define RXTDMS(n) (1<<n)
+
+/*
+ * DAVINCI_MCASP_GBLCTL_REG - Global Control Register Bits
+ */
+#define RXCLKRST BIT(0) /* Receiver Clock Divider Reset */
+#define RXHCLKRST BIT(1) /* Receiver High Frequency Clock Divider */
+#define RXSERCLR BIT(2) /* Receiver Serializer Clear */
+#define RXSMRST BIT(3) /* Receiver State Machine Reset */
+#define RXFSRST BIT(4) /* Frame Sync Generator Reset */
+#define TXCLKRST BIT(8) /* Transmitter Clock Divider Reset */
+#define TXHCLKRST BIT(9) /* Transmitter High Frequency Clock Divider*/
+#define TXSERCLR BIT(10) /* Transmit Serializer Clear */
+#define TXSMRST BIT(11) /* Transmitter State Machine Reset */
+#define TXFSRST BIT(12) /* Frame Sync Generator Reset */
+
+/*
+ * DAVINCI_MCASP_AMUTE_REG - Mute Control Register Bits
+ */
+#define MUTENA(val) (val)
+#define MUTEINPOL BIT(2)
+#define MUTEINENA BIT(3)
+#define MUTEIN BIT(4)
+#define MUTER BIT(5)
+#define MUTEX BIT(6)
+#define MUTEFSR BIT(7)
+#define MUTEFSX BIT(8)
+#define MUTEBADCLKR BIT(9)
+#define MUTEBADCLKX BIT(10)
+#define MUTERXDMAERR BIT(11)
+#define MUTETXDMAERR BIT(12)
+
+/*
+ * DAVINCI_MCASP_REVTCTL_REG - Receiver DMA Event Control Register bits
+ */
+#define RXDATADMADIS BIT(0)
+
+/*
+ * DAVINCI_MCASP_XEVTCTL_REG - Transmitter DMA Event Control Register bits
+ */
+#define TXDATADMADIS BIT(0)
+
+/*
+ * DAVINCI_MCASP_W[R]FIFOCTL - Write/Read FIFO Control Register bits
+ */
+#define FIFO_ENABLE BIT(16)
+#define NUMEVT_MASK (0xFF << 8)
+#define NUMDMA_MASK (0xFF)
+
+#define DAVINCI_MCASP_NUM_SERIALIZER 16
+
+static inline void mcasp_set_bits(void __iomem *reg, u32 val)
+{
+ __raw_writel(__raw_readl(reg) | val, reg);
+}
+
+static inline void mcasp_clr_bits(void __iomem *reg, u32 val)
+{
+ __raw_writel((__raw_readl(reg) & ~(val)), reg);
+}
+
+static inline void mcasp_mod_bits(void __iomem *reg, u32 val, u32 mask)
+{
+ __raw_writel((__raw_readl(reg) & ~mask) | val, reg);
+}
+
+static inline void mcasp_set_reg(void __iomem *reg, u32 val)
+{
+ __raw_writel(val, reg);
+}
+
+static inline u32 mcasp_get_reg(void __iomem *reg)
+{
+ return (unsigned int)__raw_readl(reg);
+}
+
+static inline void mcasp_set_ctl_reg(void __iomem *regs, u32 val)
+{
+ int i = 0;
+
+ mcasp_set_bits(regs, val);
+
+ /* programming GBLCTL needs to read back from GBLCTL and verfiy */
+ /* loop count is to avoid the lock-up */
+ for (i = 0; i < 1000; i++) {
+ if ((mcasp_get_reg(regs) & val) == val)
+ break;
+ }
+
+ if (i == 1000 && ((mcasp_get_reg(regs) & val) != val))
+ printk(KERN_ERR "GBLCTL write error\n");
+}
+
+static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct davinci_audio_dev *dev = cpu_dai->private_data;
+ cpu_dai->dma_data = dev->dma_params[substream->stream];
+ return 0;
+}
+
+static void mcasp_start_rx(struct davinci_audio_dev *dev)
+{
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXHCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXSERCLR);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXBUF_REG, 0);
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXSMRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXFSRST);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXBUF_REG, 0);
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXSMRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXFSRST);
+}
+
+static void mcasp_start_tx(struct davinci_audio_dev *dev)
+{
+ u8 offset = 0, i;
+ u32 cnt;
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXHCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXCLKRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXSERCLR);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0);
+
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXSMRST);
+ mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, TXFSRST);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0);
+ for (i = 0; i < dev->num_serializer; i++) {
+ if (dev->serial_dir[i] == TX_MODE) {
+ offset = i;
+ break;
+ }
+ }
+
+ /* wait for TX ready */
+ cnt = 0;
+ while (!(mcasp_get_reg(dev->base + DAVINCI_MCASP_XRSRCTL_REG(offset)) &
+ TXSTATE) && (cnt < 100000))
+ cnt++;
+
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXBUF_REG, 0);
+}
+
+static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream)
+{
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ mcasp_start_tx(dev);
+ else
+ mcasp_start_rx(dev);
+
+ /* enable FIFO */
+ if (dev->txnumevt)
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
+
+ if (dev->rxnumevt)
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+}
+
+static void mcasp_stop_rx(struct davinci_audio_dev *dev)
+{
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, 0);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXSTAT_REG, 0xFFFFFFFF);
+}
+
+static void mcasp_stop_tx(struct davinci_audio_dev *dev)
+{
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_GBLCTLX_REG, 0);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXSTAT_REG, 0xFFFFFFFF);
+}
+
+static void davinci_mcasp_stop(struct davinci_audio_dev *dev, int stream)
+{
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ mcasp_stop_tx(dev);
+ else
+ mcasp_stop_rx(dev);
+
+ /* disable FIFO */
+ if (dev->txnumevt)
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
+
+ if (dev->rxnumevt)
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+}
+
+static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct davinci_audio_dev *dev = cpu_dai->private_data;
+ void __iomem *base = dev->base;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ /* codec is clock and frame slave */
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x7 << 26));
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ /* codec is clock master and frame slave */
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_PDIR_REG, (0x2d << 26));
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* codec is clock and frame master */
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXE);
+ mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, AFSXE);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRE);
+ mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, AFSRE);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_PDIR_REG, (0x3f << 26));
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_NF:
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ case SND_SOC_DAIFMT_NB_IF:
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ case SND_SOC_DAIFMT_IB_IF:
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ case SND_SOC_DAIFMT_NB_NF:
+ mcasp_set_bits(base + DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
+
+ mcasp_clr_bits(base + DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int davinci_config_channel_size(struct davinci_audio_dev *dev,
+ int channel_size)
+{
+ u32 fmt = 0;
+
+ switch (channel_size) {
+ case DAVINCI_AUDIO_WORD_8:
+ fmt = 0x03;
+ break;
+
+ case DAVINCI_AUDIO_WORD_12:
+ fmt = 0x05;
+ break;
+
+ case DAVINCI_AUDIO_WORD_16:
+ fmt = 0x07;
+ break;
+
+ case DAVINCI_AUDIO_WORD_20:
+ fmt = 0x09;
+ break;
+
+ case DAVINCI_AUDIO_WORD_24:
+ fmt = 0x0B;
+ break;
+
+ case DAVINCI_AUDIO_WORD_28:
+ fmt = 0x0D;
+ break;
+
+ case DAVINCI_AUDIO_WORD_32:
+ fmt = 0x0F;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG,
+ RXSSZ(fmt), RXSSZ(0x0F));
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG,
+ TXSSZ(fmt), TXSSZ(0x0F));
+ return 0;
+}
+
+static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream)
+{
+ int i;
+ u8 tx_ser = 0;
+ u8 rx_ser = 0;
+
+ /* Default configuration */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_PWREMUMGT_REG, MCASP_SOFT);
+
+ /* All PINS as McASP */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_PFUNC_REG, 0x00000000);
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXSTAT_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_XEVTCTL_REG,
+ TXDATADMADIS);
+ } else {
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXSTAT_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_REVTCTL_REG,
+ RXDATADMADIS);
+ }
+
+ for (i = 0; i < dev->num_serializer; i++) {
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_XRSRCTL_REG(i),
+ dev->serial_dir[i]);
+ if (dev->serial_dir[i] == TX_MODE) {
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_PDIR_REG,
+ AXR(i));
+ tx_ser++;
+ } else if (dev->serial_dir[i] == RX_MODE) {
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_PDIR_REG,
+ AXR(i));
+ rx_ser++;
+ }
+ }
+
+ if (dev->txnumevt && stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (dev->txnumevt * tx_ser > 64)
+ dev->txnumevt = 1;
+
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, tx_ser,
+ NUMDMA_MASK);
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+ ((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
+ }
+
+ if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) {
+ if (dev->rxnumevt * rx_ser > 64)
+ dev->rxnumevt = 1;
+
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, rx_ser,
+ NUMDMA_MASK);
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+ ((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+ }
+}
+
+static void davinci_hw_param(struct davinci_audio_dev *dev, int stream)
+{
+ int i, active_slots;
+ u32 mask = 0;
+
+ active_slots = (dev->tdm_slots > 31) ? 32 : dev->tdm_slots;
+ for (i = 0; i < active_slots; i++)
+ mask |= (1 << i);
+
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_ACLKXCTL_REG, TX_ASYNC);
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* bit stream is MSB first with no delay */
+ /* DSP_B mode */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_AHCLKXCTL_REG,
+ AHCLKXE);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXTDM_REG, mask);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXORD);
+
+ if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMCTL_REG,
+ FSXMOD(dev->tdm_slots), FSXMOD(0x1FF));
+ else
+ printk(KERN_ERR "playback tdm slot %d not supported\n",
+ dev->tdm_slots);
+
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_TXFMCTL_REG, FSXDUR);
+ } else {
+ /* bit stream is MSB first with no delay */
+ /* DSP_B mode */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, RXORD);
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_AHCLKRCTL_REG,
+ AHCLKRE);
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXTDM_REG, mask);
+
+ if ((dev->tdm_slots >= 2) || (dev->tdm_slots <= 32))
+ mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMCTL_REG,
+ FSRMOD(dev->tdm_slots), FSRMOD(0x1FF));
+ else
+ printk(KERN_ERR "capture tdm slot %d not supported\n",
+ dev->tdm_slots);
+
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, 0xFFFFFFFF);
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
+ }
+}
+
+/* S/PDIF */
+static void davinci_hw_dit_param(struct davinci_audio_dev *dev)
+{
+ /* Set the PDIR for Serialiser as output */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_PDIR_REG, AFSX);
+
+ /* TXMASK for 24 bits */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, 0x00FFFFFF);
+
+ /* Set the TX format : 24 bit right rotation, 32 bit slot, Pad 0
+ and LSB first */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_TXFMT_REG,
+ TXROT(6) | TXSSZ(15));
+
+ /* Set TX frame synch : DIT Mode, 1 bit width, internal, rising edge */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXFMCTL_REG,
+ AFSXE | FSXMOD(0x180));
+
+ /* Set the TX tdm : for all the slots */
+ mcasp_set_reg(dev->base + DAVINCI_MCASP_TXTDM_REG, 0xFFFFFFFF);
+
+ /* Set the TX clock controls : div = 1 and internal */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_ACLKXCTL_REG,
+ ACLKXE | TX_ASYNC);
+
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_XEVTCTL_REG, TXDATADMADIS);
+
+ /* Only 44100 and 48000 are valid, both have the same setting */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_AHCLKXCTL_REG, AHCLKXDIV(3));
+
+ /* Enable the DIT */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_TXDITCTL_REG, DITEN);
+}
+
+static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct davinci_audio_dev *dev = cpu_dai->private_data;
+ struct davinci_pcm_dma_params *dma_params =
+ dev->dma_params[substream->stream];
+ int word_length;
+ u8 numevt;
+
+ davinci_hw_common_param(dev, substream->stream);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ numevt = dev->txnumevt;
+ else
+ numevt = dev->rxnumevt;
+
+ if (!numevt)
+ numevt = 1;
+
+ if (dev->op_mode == DAVINCI_MCASP_DIT_MODE)
+ davinci_hw_dit_param(dev);
+ else
+ davinci_hw_param(dev, substream->stream);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ dma_params->data_type = 1;
+ word_length = DAVINCI_AUDIO_WORD_8;
+ break;
+
+ case SNDRV_PCM_FORMAT_S16_LE:
+ dma_params->data_type = 2;
+ word_length = DAVINCI_AUDIO_WORD_16;
+ break;
+
+ case SNDRV_PCM_FORMAT_S32_LE:
+ dma_params->data_type = 4;
+ word_length = DAVINCI_AUDIO_WORD_32;
+ break;
+
+ default:
+ printk(KERN_WARNING "davinci-mcasp: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ if (dev->version == MCASP_VERSION_2) {
+ dma_params->data_type *= numevt;
+ dma_params->acnt = 4 * numevt;
+ } else
+ dma_params->acnt = dma_params->data_type;
+
+ davinci_config_channel_size(dev, word_length);
+
+ return 0;
+}
+
+static int davinci_mcasp_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *cpu_dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct davinci_audio_dev *dev = rtd->dai->cpu_dai->private_data;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ davinci_mcasp_start(dev, substream->stream);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ davinci_mcasp_stop(dev, substream->stream);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
+ .startup = davinci_mcasp_startup,
+ .trigger = davinci_mcasp_trigger,
+ .hw_params = davinci_mcasp_hw_params,
+ .set_fmt = davinci_mcasp_set_dai_fmt,
+
+};
+
+struct snd_soc_dai davinci_mcasp_dai[] = {
+ {
+ .name = "davinci-i2s",
+ .id = 0,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_MCASP_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = DAVINCI_MCASP_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
+ },
+ .ops = &davinci_mcasp_dai_ops,
+
+ },
+ {
+ .name = "davinci-dit",
+ .id = 1,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 384,
+ .rates = DAVINCI_MCASP_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &davinci_mcasp_dai_ops,
+ },
+
+};
+EXPORT_SYMBOL_GPL(davinci_mcasp_dai);
+
+static int davinci_mcasp_probe(struct platform_device *pdev)
+{
+ struct davinci_pcm_dma_params *dma_data;
+ struct resource *mem, *ioarea, *res;
+ struct snd_platform_data *pdata;
+ struct davinci_audio_dev *dev;
+ int count = 0;
+ int ret = 0;
+
+ dev = kzalloc(sizeof(struct davinci_audio_dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dma_data = kzalloc(sizeof(struct davinci_pcm_dma_params) * 2,
+ GFP_KERNEL);
+ if (!dma_data) {
+ ret = -ENOMEM;
+ goto err_release_dev;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ ret = -ENODEV;
+ goto err_release_data;
+ }
+
+ ioarea = request_mem_region(mem->start,
+ (mem->end - mem->start) + 1, pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "Audio region already claimed\n");
+ ret = -EBUSY;
+ goto err_release_data;
+ }
+
+ pdata = pdev->dev.platform_data;
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ ret = -ENODEV;
+ goto err_release_region;
+ }
+
+ clk_enable(dev->clk);
+
+ dev->base = (void __iomem *)IO_ADDRESS(mem->start);
+ dev->op_mode = pdata->op_mode;
+ dev->tdm_slots = pdata->tdm_slots;
+ dev->num_serializer = pdata->num_serializer;
+ dev->serial_dir = pdata->serial_dir;
+ dev->codec_fmt = pdata->codec_fmt;
+ dev->version = pdata->version;
+ dev->txnumevt = pdata->txnumevt;
+ dev->rxnumevt = pdata->rxnumevt;
+
+ dma_data[count].name = "I2S PCM Stereo out";
+ dma_data[count].eventq_no = pdata->eventq_no;
+ dma_data[count].dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
+ io_v2p(dev->base));
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &dma_data[count];
+
+ /* first TX, then RX */
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ goto err_release_region;
+ }
+
+ dma_data[count].channel = res->start;
+ count++;
+ dma_data[count].name = "I2S PCM Stereo in";
+ dma_data[count].eventq_no = pdata->eventq_no;
+ dma_data[count].dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
+ io_v2p(dev->base));
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &dma_data[count];
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "no DMA resource\n");
+ goto err_release_region;
+ }
+
+ dma_data[count].channel = res->start;
+ davinci_mcasp_dai[pdata->op_mode].private_data = dev;
+ davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
+ ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
+
+ if (ret != 0)
+ goto err_release_region;
+ return 0;
+
+err_release_region:
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+err_release_data:
+ kfree(dma_data);
+err_release_dev:
+ kfree(dev);
+
+ return ret;
+}
+
+static int davinci_mcasp_remove(struct platform_device *pdev)
+{
+ struct snd_platform_data *pdata = pdev->dev.platform_data;
+ struct davinci_pcm_dma_params *dma_data;
+ struct davinci_audio_dev *dev;
+ struct resource *mem;
+
+ snd_soc_unregister_dai(&davinci_mcasp_dai[pdata->op_mode]);
+ dev = davinci_mcasp_dai[pdata->op_mode].private_data;
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+
+ dma_data = dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
+ kfree(dma_data);
+ kfree(dev);
+
+ return 0;
+}
+
+static struct platform_driver davinci_mcasp_driver = {
+ .probe = davinci_mcasp_probe,
+ .remove = davinci_mcasp_remove,
+ .driver = {
+ .name = "davinci-mcasp",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init davinci_mcasp_init(void)
+{
+ return platform_driver_register(&davinci_mcasp_driver);
+}
+module_init(davinci_mcasp_init);
+
+static void __exit davinci_mcasp_exit(void)
+{
+ platform_driver_unregister(&davinci_mcasp_driver);
+}
+module_exit(davinci_mcasp_exit);
+
+MODULE_AUTHOR("Steve Chen");
+MODULE_DESCRIPTION("TI DAVINCI McASP SoC Interface");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h
new file mode 100644
index 0000000..554354c
--- /dev/null
+++ b/sound/soc/davinci/davinci-mcasp.h
@@ -0,0 +1,60 @@
+/*
+ * ALSA SoC McASP Audio Layer for TI DAVINCI processor
+ *
+ * MCASP related definitions
+ *
+ * Author: Nirmal Pandey <n-pandey@ti.com>,
+ * Suresh Rajashekara <suresh.r@ti.com>
+ * Steve Chen <schen@.mvista.com>
+ *
+ * Copyright: (C) 2009 MontaVista Software, Inc., <source@mvista.com>
+ * Copyright: (C) 2009 Texas Instruments, India
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DAVINCI_MCASP_H
+#define DAVINCI_MCASP_H
+
+#include <linux/io.h>
+#include <mach/asp.h>
+#include "davinci-pcm.h"
+
+extern struct snd_soc_dai davinci_mcasp_dai[];
+
+#define DAVINCI_MCASP_RATES SNDRV_PCM_RATE_8000_96000
+#define DAVINCI_MCASP_I2S_DAI 0
+#define DAVINCI_MCASP_DIT_DAI 1
+
+enum {
+ DAVINCI_AUDIO_WORD_8 = 0,
+ DAVINCI_AUDIO_WORD_12,
+ DAVINCI_AUDIO_WORD_16,
+ DAVINCI_AUDIO_WORD_20,
+ DAVINCI_AUDIO_WORD_24,
+ DAVINCI_AUDIO_WORD_32,
+ DAVINCI_AUDIO_WORD_28, /* This is only valid for McASP */
+};
+
+struct davinci_audio_dev {
+ void __iomem *base;
+ int sample_rate;
+ struct clk *clk;
+ struct davinci_pcm_dma_params *dma_params[2];
+ unsigned int codec_fmt;
+
+ /* McASP specific data */
+ int tdm_slots;
+ u8 op_mode;
+ u8 num_serializer;
+ u8 *serial_dir;
+ u8 version;
+
+ /* McASP FIFO related */
+ u8 txnumevt;
+ u8 rxnumevt;
+};
+
+#endif /* DAVINCI_MCASP_H */
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index a059965..091dacb 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -67,6 +67,7 @@
dma_addr_t src, dst;
unsigned short src_bidx, dst_bidx;
unsigned int data_type;
+ unsigned short acnt;
unsigned int count;
period_size = snd_pcm_lib_period_bytes(substream);
@@ -91,11 +92,12 @@
dst_bidx = data_type;
}
+ acnt = prtd->params->acnt;
edma_set_src(lch, src, INCR, W8BIT);
edma_set_dest(lch, dst, INCR, W8BIT);
edma_set_src_index(lch, src_bidx, 0);
edma_set_dest_index(lch, dst_bidx, 0);
- edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+ edma_set_transfer_params(lch, acnt, count, 1, 0, ASYNC);
prtd->period++;
if (unlikely(prtd->period >= runtime->periods))
@@ -206,6 +208,7 @@
/* Copy self-linked parameter RAM entry into master channel */
edma_read_slot(prtd->slave_lch, &temp);
edma_write_slot(prtd->master_lch, &temp);
+ davinci_pcm_enqueue_dma(substream);
return 0;
}
@@ -243,6 +246,11 @@
int ret = 0;
snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware);
+ /* ensure that buffer size is a multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
prtd = kzalloc(sizeof(struct davinci_runtime_data), GFP_KERNEL);
if (prtd == NULL)
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index 62cb4eb..63d9625 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -12,17 +12,20 @@
#ifndef _DAVINCI_PCM_H
#define _DAVINCI_PCM_H
+#include <mach/edma.h>
+#include <mach/asp.h>
+
+
struct davinci_pcm_dma_params {
- char *name; /* stream identifier */
- int channel; /* sync dma channel ID */
- dma_addr_t dma_addr; /* device physical address for DMA */
- unsigned int data_type; /* xfer data type */
+ char *name; /* stream identifier */
+ int channel; /* sync dma channel ID */
+ unsigned short acnt;
+ dma_addr_t dma_addr; /* device physical address for DMA */
+ enum dma_event_q eventq_no; /* event queue number */
+ unsigned char data_type; /* xfer data type */
+ unsigned char convert_mono_stereo;
};
-struct evm_snd_platform_data {
- int tx_dma_ch;
- int rx_dma_ch;
-};
extern struct snd_soc_platform davinci_soc_platform;
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index f0a2d40..9ff62e3 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -69,6 +69,23 @@
static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s)
{
+ if (s->appl_ptr > s->runtime->control->appl_ptr) {
+ /*
+ * In this case s->runtime->control->appl_ptr has wrapped around.
+ * Play the data to the end of the boundary, then wrap our own
+ * appl_ptr back around.
+ */
+ while (s->appl_ptr < s->runtime->boundary) {
+ if (bcom_queue_full(s->bcom_task))
+ return;
+
+ s->appl_ptr += s->period_size;
+
+ psc_dma_bcom_enqueue_next_buffer(s);
+ }
+ s->appl_ptr -= s->runtime->boundary;
+ }
+
while (s->appl_ptr < s->runtime->control->appl_ptr) {
if (bcom_queue_full(s->bcom_task))
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index 7eb5499..c4ae3e0 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/delay.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -112,7 +113,7 @@
out_8(®s->op1, MPC52xx_PSC_OP_RES);
udelay(10);
out_8(®s->op0, MPC52xx_PSC_OP_RES);
- udelay(50);
+ msleep(1);
psc_ac97_warm_reset(ac97);
}
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
new file mode 100644
index 0000000..a700562e
--- /dev/null
+++ b/sound/soc/imx/Kconfig
@@ -0,0 +1,21 @@
+config SND_MX1_MX2_SOC
+ tristate "SoC Audio for Freecale i.MX1x i.MX2x CPUs"
+ depends on ARCH_MX2 || ARCH_MX1
+ select SND_PCM
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the MX1 or MX2 SSI interface.
+
+config SND_MXC_SOC_SSI
+ tristate
+
+config SND_SOC_MX27VIS_WM8974
+ tristate "SoC Audio support for MX27 - WM8974 Visstrim_sm10 board"
+ depends on SND_MX1_MX2_SOC && MACH_MX27 && MACH_IMX27_VISSTRIM_M10
+ select SND_MXC_SOC_SSI
+ select SND_SOC_WM8974
+ help
+ Say Y if you want to add support for SoC audio on Visstrim SM10
+ board with WM8974.
+
+
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
new file mode 100644
index 0000000..c2ffd2c
--- /dev/null
+++ b/sound/soc/imx/Makefile
@@ -0,0 +1,10 @@
+# i.MX Platform Support
+snd-soc-mx1_mx2-objs := mx1_mx2-pcm.o
+snd-soc-mxc-ssi-objs := mxc-ssi.o
+
+obj-$(CONFIG_SND_MX1_MX2_SOC) += snd-soc-mx1_mx2.o
+obj-$(CONFIG_SND_MXC_SOC_SSI) += snd-soc-mxc-ssi.o
+
+# i.MX Machine Support
+snd-soc-mx27vis-wm8974-objs := mx27vis_wm8974.o
+obj-$(CONFIG_SND_SOC_MX27VIS_WM8974) += snd-soc-mx27vis-wm8974.o
diff --git a/sound/soc/imx/mx1_mx2-pcm.c b/sound/soc/imx/mx1_mx2-pcm.c
new file mode 100644
index 0000000..b838665
--- /dev/null
+++ b/sound/soc/imx/mx1_mx2-pcm.c
@@ -0,0 +1,488 @@
+/*
+ * mx1_mx2-pcm.c -- ALSA SoC interface for Freescale i.MX1x, i.MX2x CPUs
+ *
+ * Copyright 2009 Vista Silicon S.L.
+ * Author: Javier Martin
+ * javier.martin@vista-silicon.com
+ *
+ * Based on mxc-pcm.c by Liam Girdwood.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <asm/dma.h>
+#include <mach/hardware.h>
+#include <mach/dma-mx1-mx2.h>
+
+#include "mx1_mx2-pcm.h"
+
+
+static const struct snd_pcm_hardware mx1_mx2_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .buffer_bytes_max = 32 * 1024,
+ .period_bytes_min = 64,
+ .period_bytes_max = 8 * 1024,
+ .periods_min = 2,
+ .periods_max = 255,
+ .fifo_size = 0,
+};
+
+struct mx1_mx2_runtime_data {
+ int dma_ch;
+ int active;
+ unsigned int period;
+ unsigned int periods;
+ int tx_spin;
+ spinlock_t dma_lock;
+ struct mx1_mx2_pcm_dma_params *dma_params;
+};
+
+
+/**
+ * This function stops the current dma transfer for playback
+ * and clears the dma pointers.
+ *
+ * @param substream pointer to the structure of the current stream.
+ *
+ */
+static int audio_stop_dma(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&prtd->dma_lock, flags);
+
+ pr_debug("%s\n", __func__);
+
+ prtd->active = 0;
+ prtd->period = 0;
+ prtd->periods = 0;
+
+ /* this stops the dma channel and clears the buffer ptrs */
+
+ imx_dma_disable(prtd->dma_ch);
+
+ spin_unlock_irqrestore(&prtd->dma_lock, flags);
+
+ return 0;
+}
+
+/**
+ * This function is called whenever a new audio block needs to be
+ * transferred to the codec. The function receives the address and the size
+ * of the new block and start a new DMA transfer.
+ *
+ * @param substream pointer to the structure of the current stream.
+ *
+ */
+static int dma_new_period(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+ unsigned int dma_size;
+ unsigned int offset;
+ int ret = 0;
+ dma_addr_t mem_addr;
+ unsigned int dev_addr;
+
+ if (prtd->active) {
+ dma_size = frames_to_bytes(runtime, runtime->period_size);
+ offset = dma_size * prtd->period;
+
+ pr_debug("%s: period (%d) out of (%d)\n", __func__,
+ prtd->period,
+ runtime->periods);
+ pr_debug("period_size %d frames\n offset %d bytes\n",
+ (unsigned int)runtime->period_size,
+ offset);
+ pr_debug("dma_size %d bytes\n", dma_size);
+
+ snd_BUG_ON(dma_size > mx1_mx2_pcm_hardware.period_bytes_max);
+
+ mem_addr = (dma_addr_t)(runtime->dma_addr + offset);
+ dev_addr = prtd->dma_params->per_address;
+ pr_debug("%s: mem_addr is %x\n dev_addr is %x\n",
+ __func__, mem_addr, dev_addr);
+
+ ret = imx_dma_setup_single(prtd->dma_ch, mem_addr,
+ dma_size, dev_addr,
+ prtd->dma_params->transfer_type);
+ if (ret < 0) {
+ printk(KERN_ERR "Error %d configuring DMA\n", ret);
+ return ret;
+ }
+ imx_dma_enable(prtd->dma_ch);
+
+ pr_debug("%s: transfer enabled\nmem_addr = %x\n",
+ __func__, (unsigned int) mem_addr);
+ pr_debug("dev_addr = %x\ndma_size = %d\n",
+ (unsigned int) dev_addr, dma_size);
+
+ prtd->tx_spin = 1; /* FGA little trick to retrieve DMA pos */
+ prtd->period++;
+ prtd->period %= runtime->periods;
+ }
+ return ret;
+}
+
+
+/**
+ * This is a callback which will be called
+ * when a TX transfer finishes. The call occurs
+ * in interrupt context.
+ *
+ * @param dat pointer to the structure of the current stream.
+ *
+ */
+static void audio_dma_irq(int channel, void *data)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ struct mx1_mx2_runtime_data *prtd;
+ unsigned int dma_size;
+ unsigned int previous_period;
+ unsigned int offset;
+
+ substream = data;
+ runtime = substream->runtime;
+ prtd = runtime->private_data;
+ previous_period = prtd->periods;
+ dma_size = frames_to_bytes(runtime, runtime->period_size);
+ offset = dma_size * previous_period;
+
+ prtd->tx_spin = 0;
+ prtd->periods++;
+ prtd->periods %= runtime->periods;
+
+ pr_debug("%s: irq per %d offset %x\n", __func__, prtd->periods, offset);
+
+ /*
+ * If we are getting a callback for an active stream then we inform
+ * the PCM middle layer we've finished a period
+ */
+ if (prtd->active)
+ snd_pcm_period_elapsed(substream);
+
+ /*
+ * Trig next DMA transfer
+ */
+ dma_new_period(substream);
+}
+
+/**
+ * This function configures the hardware to allow audio
+ * playback operations. It is called by ALSA framework.
+ *
+ * @param substream pointer to the structure of the current stream.
+ *
+ * @return 0 on success, -1 otherwise.
+ */
+static int
+snd_mx1_mx2_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+
+ prtd->period = 0;
+ prtd->periods = 0;
+
+ return 0;
+}
+
+static int mx1_mx2_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret;
+
+ ret = snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+ if (ret < 0) {
+ printk(KERN_ERR "%s: Error %d failed to malloc pcm pages \n",
+ __func__, ret);
+ return ret;
+ }
+
+ pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_addr 0x(%x)\n",
+ __func__, (unsigned int)runtime->dma_addr);
+ pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_area 0x(%x)\n",
+ __func__, (unsigned int)runtime->dma_area);
+ pr_debug("%s: snd_imx1_mx2_audio_hw_params runtime->dma_bytes 0x(%x)\n",
+ __func__, (unsigned int)runtime->dma_bytes);
+
+ return ret;
+}
+
+static int mx1_mx2_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+
+ imx_dma_free(prtd->dma_ch);
+
+ snd_pcm_lib_free_pages(substream);
+
+ return 0;
+}
+
+static int mx1_mx2_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct mx1_mx2_runtime_data *prtd = substream->runtime->private_data;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ prtd->tx_spin = 0;
+ /* requested stream startup */
+ prtd->active = 1;
+ pr_debug("%s: starting dma_new_period\n", __func__);
+ ret = dma_new_period(substream);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ /* requested stream shutdown */
+ pr_debug("%s: stopping dma transfer\n", __func__);
+ ret = audio_stop_dma(substream);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t
+mx1_mx2_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+ unsigned int offset = 0;
+
+ /* tx_spin value is used here to check if a transfer is active */
+ if (prtd->tx_spin) {
+ offset = (runtime->period_size * (prtd->periods)) +
+ (runtime->period_size >> 1);
+ if (offset >= runtime->buffer_size)
+ offset = runtime->period_size >> 1;
+ } else {
+ offset = (runtime->period_size * (prtd->periods));
+ if (offset >= runtime->buffer_size)
+ offset = 0;
+ }
+ pr_debug("%s: pointer offset %x\n", __func__, offset);
+
+ return offset;
+}
+
+static int mx1_mx2_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct mx1_mx2_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
+ int ret;
+
+ snd_soc_set_runtime_hwparams(substream, &mx1_mx2_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ return ret;
+
+ prtd = kzalloc(sizeof(struct mx1_mx2_runtime_data), GFP_KERNEL);
+ if (prtd == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ runtime->private_data = prtd;
+
+ if (!dma_data)
+ return -ENODEV;
+
+ prtd->dma_params = dma_data;
+
+ pr_debug("%s: Requesting dma channel (%s)\n", __func__,
+ prtd->dma_params->name);
+ prtd->dma_ch = imx_dma_request_by_prio(prtd->dma_params->name,
+ DMA_PRIO_HIGH);
+ if (prtd->dma_ch < 0) {
+ printk(KERN_ERR "Error %d requesting dma channel\n", ret);
+ return ret;
+ }
+ imx_dma_config_burstlen(prtd->dma_ch,
+ prtd->dma_params->watermark_level);
+
+ ret = imx_dma_config_channel(prtd->dma_ch,
+ prtd->dma_params->per_config,
+ prtd->dma_params->mem_config,
+ prtd->dma_params->event_id, 0);
+
+ if (ret) {
+ pr_debug(KERN_ERR "Error %d configuring dma channel %d\n",
+ ret, prtd->dma_ch);
+ return ret;
+ }
+
+ pr_debug("%s: Setting tx dma callback function\n", __func__);
+ ret = imx_dma_setup_handlers(prtd->dma_ch,
+ audio_dma_irq, NULL,
+ (void *)substream);
+ if (ret < 0) {
+ printk(KERN_ERR "Error %d setting dma callback function\n", ret);
+ return ret;
+ }
+ return 0;
+
+ out:
+ return ret;
+}
+
+static int mx1_mx2_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct mx1_mx2_runtime_data *prtd = runtime->private_data;
+
+ kfree(prtd);
+
+ return 0;
+}
+
+static int mx1_mx2_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+ runtime->dma_area,
+ runtime->dma_addr,
+ runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops mx1_mx2_pcm_ops = {
+ .open = mx1_mx2_pcm_open,
+ .close = mx1_mx2_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = mx1_mx2_pcm_hw_params,
+ .hw_free = mx1_mx2_pcm_hw_free,
+ .prepare = snd_mx1_mx2_prepare,
+ .trigger = mx1_mx2_pcm_trigger,
+ .pointer = mx1_mx2_pcm_pointer,
+ .mmap = mx1_mx2_pcm_mmap,
+};
+
+static u64 mx1_mx2_pcm_dmamask = 0xffffffff;
+
+static int mx1_mx2_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = mx1_mx2_pcm_hardware.buffer_bytes_max;
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+
+ /* Reserve uncached-buffered memory area for DMA */
+ buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+
+ pr_debug("%s: preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
+ __func__, (void *) buf->area, (void *) buf->addr, size);
+
+ if (!buf->area)
+ return -ENOMEM;
+
+ buf->bytes = size;
+ return 0;
+}
+
+static void mx1_mx2_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+
+ dma_free_writecombine(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+static int mx1_mx2_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &mx1_mx2_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = 0xffffffff;
+
+ if (dai->playback.channels_min) {
+ ret = mx1_mx2_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ pr_debug("%s: preallocate playback buffer\n", __func__);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ ret = mx1_mx2_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ pr_debug("%s: preallocate capture buffer\n", __func__);
+ if (ret)
+ goto out;
+ }
+ out:
+ return ret;
+}
+
+struct snd_soc_platform mx1_mx2_soc_platform = {
+ .name = "mx1_mx2-audio",
+ .pcm_ops = &mx1_mx2_pcm_ops,
+ .pcm_new = mx1_mx2_pcm_new,
+ .pcm_free = mx1_mx2_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(mx1_mx2_soc_platform);
+
+static int __init mx1_mx2_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&mx1_mx2_soc_platform);
+}
+module_init(mx1_mx2_soc_platform_init);
+
+static void __exit mx1_mx2_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&mx1_mx2_soc_platform);
+}
+module_exit(mx1_mx2_soc_platform_exit);
+
+MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
+MODULE_DESCRIPTION("Freescale i.MX2x, i.MX1x PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/mx1_mx2-pcm.h b/sound/soc/imx/mx1_mx2-pcm.h
new file mode 100644
index 0000000..2e52810
--- /dev/null
+++ b/sound/soc/imx/mx1_mx2-pcm.h
@@ -0,0 +1,26 @@
+/*
+ * mx1_mx2-pcm.h :- ASoC platform header for Freescale i.MX1x, i.MX2x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MX1_MX2_PCM_H
+#define _MX1_MX2_PCM_H
+
+/* DMA information for mx1_mx2 platforms */
+struct mx1_mx2_pcm_dma_params {
+ char *name; /* stream identifier */
+ unsigned int transfer_type; /* READ or WRITE DMA transfer */
+ dma_addr_t per_address; /* physical address of SSI fifo */
+ int event_id; /* fixed DMA number for SSI fifo */
+ int watermark_level; /* SSI fifo watermark level */
+ int per_config; /* DMA Config flags for peripheral */
+ int mem_config; /* DMA Config flags for RAM */
+ };
+
+/* platform data */
+extern struct snd_soc_platform mx1_mx2_soc_platform;
+
+#endif
diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c
new file mode 100644
index 0000000..e4dcb53
--- /dev/null
+++ b/sound/soc/imx/mx27vis_wm8974.c
@@ -0,0 +1,317 @@
+/*
+ * mx27vis_wm8974.c -- SoC audio for mx27vis
+ *
+ * Copyright 2009 Vista Silicon S.L.
+ * Author: Javier Martin
+ * javier.martin@vista-silicon.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+
+#include "../codecs/wm8974.h"
+#include "mx1_mx2-pcm.h"
+#include "mxc-ssi.h"
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+
+#define IGNORED_ARG 0
+
+
+static struct snd_soc_card mx27vis;
+
+/**
+ * This function connects SSI1 (HPCR1) as slave to
+ * SSI1 external signals (PPCR1)
+ * As slave, HPCR1 must set TFSDIR and TCLKDIR as inputs from
+ * port 4
+ */
+void audmux_connect_1_4(void)
+{
+ pr_debug("AUDMUX: normal operation mode\n");
+ /* Reset HPCR1 and PPCR1 */
+
+ DAM_HPCR1 = 0x00000000;
+ DAM_PPCR1 = 0x00000000;
+
+ /* set to synchronous */
+ DAM_HPCR1 |= AUDMUX_HPCR_SYN;
+ DAM_PPCR1 |= AUDMUX_PPCR_SYN;
+
+
+ /* set Rx sources 1 <--> 4 */
+ DAM_HPCR1 |= AUDMUX_HPCR_RXDSEL(3); /* port 4 */
+ DAM_PPCR1 |= AUDMUX_PPCR_RXDSEL(0); /* port 1 */
+
+ /* set Tx frame and Clock direction and source 4 --> 1 output */
+ DAM_HPCR1 |= AUDMUX_HPCR_TFSDIR | AUDMUX_HPCR_TCLKDIR;
+ DAM_HPCR1 |= AUDMUX_HPCR_TFCSEL(3); /* TxDS and TxCclk from port 4 */
+
+ return;
+}
+
+static int mx27vis_hifi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0, bclk = 0, fmt = 0, mclk = 0;
+ int ret = 0;
+
+ /*
+ * The WM8974 is better at generating accurate audio clocks than the
+ * MX27 SSI controller, so we will use it as master when we can.
+ */
+ switch (params_rate(params)) {
+ case 8000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ mclk = WM8974_MCLKDIV_12;
+ pll_out = 24576000;
+ break;
+ case 16000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ pll_out = 12288000;
+ break;
+ case 48000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_4;
+ pll_out = 12288000;
+ break;
+ case 96000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_2;
+ pll_out = 12288000;
+ break;
+ case 11025:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_16;
+ pll_out = 11289600;
+ break;
+ case 22050:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_8;
+ pll_out = 11289600;
+ break;
+ case 44100:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_4;
+ mclk = WM8974_MCLKDIV_2;
+ pll_out = 11289600;
+ break;
+ case 88200:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_2;
+ pll_out = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = codec_dai->ops->set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_SYNC | fmt);
+ if (ret < 0) {
+ printk(KERN_ERR "Error from codec DAI configuration\n");
+ return ret;
+ }
+
+ /* set cpu DAI configuration */
+ ret = cpu_dai->ops->set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_SYNC | fmt);
+ if (ret < 0) {
+ printk(KERN_ERR "Error from cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Put DC field of STCCR to 1 (not zero) */
+ ret = cpu_dai->ops->set_tdm_slot(cpu_dai, 0, 2);
+
+ /* set the SSI system clock as input */
+ ret = cpu_dai->ops->set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting system SSI clk\n");
+ return ret;
+ }
+
+ /* set codec BCLK division for sample rate */
+ ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_BCLKDIV, bclk);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting BCLK division\n");
+ return ret;
+ }
+
+
+ /* codec PLL input is 25 MHz */
+ ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG,
+ 25000000, pll_out);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting PLL input\n");
+ return ret;
+ }
+
+ /*set codec MCLK division for sample rate */
+ ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_MCLKDIV, mclk);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting MCLK division\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0);
+}
+
+/*
+ * mx27vis WM8974 HiFi DAI opserations.
+ */
+static struct snd_soc_ops mx27vis_hifi_ops = {
+ .hw_params = mx27vis_hifi_hw_params,
+ .hw_free = mx27vis_hifi_hw_free,
+};
+
+
+static int mx27vis_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return 0;
+}
+
+static int mx27vis_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int mx27vis_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = get_ssi_clk(0, &pdev->dev);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: cant get ssi clock\n", __func__);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+static int mx27vis_remove(struct platform_device *pdev)
+{
+ put_ssi_clk(0);
+ return 0;
+}
+
+static struct snd_soc_dai_link mx27vis_dai[] = {
+{ /* Hifi Playback*/
+ .name = "WM8974",
+ .stream_name = "WM8974 HiFi",
+ .cpu_dai = &imx_ssi_pcm_dai[0],
+ .codec_dai = &wm8974_dai,
+ .ops = &mx27vis_hifi_ops,
+},
+};
+
+static struct snd_soc_card mx27vis = {
+ .name = "mx27vis",
+ .platform = &mx1_mx2_soc_platform,
+ .probe = mx27vis_probe,
+ .remove = mx27vis_remove,
+ .suspend_pre = mx27vis_suspend,
+ .resume_post = mx27vis_resume,
+ .dai_link = mx27vis_dai,
+ .num_links = ARRAY_SIZE(mx27vis_dai),
+};
+
+static struct snd_soc_device mx27vis_snd_devdata = {
+ .card = &mx27vis,
+ .codec_dev = &soc_codec_dev_wm8974,
+};
+
+static struct platform_device *mx27vis_snd_device;
+
+/* Temporal definition of board specific behaviour */
+void gpio_ssi_active(int ssi_num)
+{
+ int ret = 0;
+
+ unsigned int ssi1_pins[] = {
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ };
+ unsigned int ssi2_pins[] = {
+ PC24_PF_SSI2_FS,
+ PC25_PF_SSI2_RXD,
+ PC26_PF_SSI2_TXD,
+ PC27_PF_SSI2_CLK,
+ };
+ if (ssi_num == 0)
+ ret = mxc_gpio_setup_multiple_pins(ssi1_pins,
+ ARRAY_SIZE(ssi1_pins), "USB OTG");
+ else
+ ret = mxc_gpio_setup_multiple_pins(ssi2_pins,
+ ARRAY_SIZE(ssi2_pins), "USB OTG");
+ if (ret)
+ printk(KERN_ERR "Error requesting ssi %x pins\n", ssi_num);
+}
+
+
+static int __init mx27vis_init(void)
+{
+ int ret;
+
+ mx27vis_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!mx27vis_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(mx27vis_snd_device, &mx27vis_snd_devdata);
+ mx27vis_snd_devdata.dev = &mx27vis_snd_device->dev;
+ ret = platform_device_add(mx27vis_snd_device);
+
+ if (ret) {
+ printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+ platform_device_put(mx27vis_snd_device);
+ }
+
+ /* WM8974 uses SSI1 (HPCR1) via AUDMUX port 4 for audio (PPCR1) */
+ gpio_ssi_active(0);
+ audmux_connect_1_4();
+
+ return ret;
+}
+
+static void __exit mx27vis_exit(void)
+{
+ /* We should call some "ssi_gpio_inactive()" properly */
+}
+
+module_init(mx27vis_init);
+module_exit(mx27vis_exit);
+
+
+MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
+MODULE_DESCRIPTION("ALSA SoC WM8974 mx27vis");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/mxc-ssi.c b/sound/soc/imx/mxc-ssi.c
new file mode 100644
index 0000000..3806ff2
--- /dev/null
+++ b/sound/soc/imx/mxc-ssi.c
@@ -0,0 +1,868 @@
+/*
+ * mxc-ssi.c -- SSI driver for Freescale IMX
+ *
+ * Copyright 2006 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Based on mxc-alsa-mc13783 (C) 2006 Freescale.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * TODO:
+ * Need to rework SSI register defs when new defs go into mainline.
+ * Add support for TDM and FIFO 1.
+ * Add support for i.mx3x DMA interface.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <mach/dma-mx1-mx2.h>
+#include <asm/mach-types.h>
+
+#include "mxc-ssi.h"
+#include "mx1_mx2-pcm.h"
+
+#define SSI1_PORT 0
+#define SSI2_PORT 1
+
+static int ssi_active[2] = {0, 0};
+
+/* DMA information for mx1_mx2 platforms */
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out0 = {
+ .name = "SSI1 PCM Stereo out 0",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI1_BASE_ADDR + STX0,
+ .event_id = DMA_REQ_SSI1_TX0,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out1 = {
+ .name = "SSI1 PCM Stereo out 1",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI1_BASE_ADDR + STX1,
+ .event_id = DMA_REQ_SSI1_TX1,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in0 = {
+ .name = "SSI1 PCM Stereo in 0",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI1_BASE_ADDR + SRX0,
+ .event_id = DMA_REQ_SSI1_RX0,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in1 = {
+ .name = "SSI1 PCM Stereo in 1",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI1_BASE_ADDR + SRX1,
+ .event_id = DMA_REQ_SSI1_RX1,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out0 = {
+ .name = "SSI2 PCM Stereo out 0",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI2_BASE_ADDR + STX0,
+ .event_id = DMA_REQ_SSI2_TX0,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out1 = {
+ .name = "SSI2 PCM Stereo out 1",
+ .transfer_type = DMA_MODE_WRITE,
+ .per_address = SSI2_BASE_ADDR + STX1,
+ .event_id = DMA_REQ_SSI2_TX1,
+ .watermark_level = TXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in0 = {
+ .name = "SSI2 PCM Stereo in 0",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI2_BASE_ADDR + SRX0,
+ .event_id = DMA_REQ_SSI2_RX0,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in1 = {
+ .name = "SSI2 PCM Stereo in 1",
+ .transfer_type = DMA_MODE_READ,
+ .per_address = SSI2_BASE_ADDR + SRX1,
+ .event_id = DMA_REQ_SSI2_RX1,
+ .watermark_level = RXFIFO_WATERMARK,
+ .per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+ .mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct clk *ssi_clk0, *ssi_clk1;
+
+int get_ssi_clk(int ssi, struct device *dev)
+{
+ switch (ssi) {
+ case 0:
+ ssi_clk0 = clk_get(dev, "ssi1");
+ if (IS_ERR(ssi_clk0))
+ return PTR_ERR(ssi_clk0);
+ return 0;
+ case 1:
+ ssi_clk1 = clk_get(dev, "ssi2");
+ if (IS_ERR(ssi_clk1))
+ return PTR_ERR(ssi_clk1);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(get_ssi_clk);
+
+void put_ssi_clk(int ssi)
+{
+ switch (ssi) {
+ case 0:
+ clk_put(ssi_clk0);
+ ssi_clk0 = NULL;
+ break;
+ case 1:
+ clk_put(ssi_clk1);
+ ssi_clk1 = NULL;
+ break;
+ }
+}
+EXPORT_SYMBOL(put_ssi_clk);
+
+/*
+ * SSI system clock configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ u32 scr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ scr = SSI1_SCR;
+ pr_debug("%s: SCR for SSI1 is %x\n", __func__, scr);
+ } else {
+ scr = SSI2_SCR;
+ pr_debug("%s: SCR for SSI2 is %x\n", __func__, scr);
+ }
+
+ if (scr & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ switch (clk_id) {
+ case IMX_SSP_SYS_CLK:
+ if (dir == SND_SOC_CLOCK_OUT) {
+ scr |= SSI_SCR_SYS_CLK_EN;
+ pr_debug("%s: clk of is output\n", __func__);
+ } else {
+ scr &= ~SSI_SCR_SYS_CLK_EN;
+ pr_debug("%s: clk of is input\n", __func__);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ pr_debug("%s: writeback of SSI1_SCR\n", __func__);
+ SSI1_SCR = scr;
+ } else {
+ pr_debug("%s: writeback of SSI2_SCR\n", __func__);
+ SSI2_SCR = scr;
+ }
+
+ return 0;
+}
+
+/*
+ * SSI Clock dividers
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ u32 stccr, srccr;
+
+ pr_debug("%s\n", __func__);
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN)
+ return 0;
+ srccr = SSI1_STCCR;
+ stccr = SSI1_STCCR;
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN)
+ return 0;
+ srccr = SSI2_STCCR;
+ stccr = SSI2_STCCR;
+ }
+
+ switch (div_id) {
+ case IMX_SSI_TX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_TX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ case IMX_SSI_RX_DIV_2:
+ stccr &= ~SSI_STCCR_DIV2;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PSR:
+ stccr &= ~SSI_STCCR_PSR;
+ stccr |= div;
+ break;
+ case IMX_SSI_RX_DIV_PM:
+ stccr &= ~0xff;
+ stccr |= SSI_STCCR_PM(div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCCR = stccr;
+ SSI1_SRCCR = srccr;
+ } else {
+ SSI2_STCCR = stccr;
+ SSI2_SRCCR = srccr;
+ }
+ return 0;
+}
+
+/*
+ * SSI Network Mode or TDM slots configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+ unsigned int mask, int slots)
+{
+ u32 stmsk, srmsk, stccr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ stccr = SSI1_STCCR;
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ stccr = SSI2_STCCR;
+ }
+
+ stmsk = srmsk = mask;
+ stccr &= ~SSI_STCCR_DC_MASK;
+ stccr |= SSI_STCCR_DC(slots - 1);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STMSK = stmsk;
+ SSI1_SRMSK = srmsk;
+ SSI1_SRCCR = SSI1_STCCR = stccr;
+ } else {
+ SSI2_STMSK = stmsk;
+ SSI2_SRMSK = srmsk;
+ SSI2_SRCCR = SSI2_STCCR = stccr;
+ }
+
+ return 0;
+}
+
+/*
+ * SSI DAI format configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ * Note: We don't use the I2S modes but instead manually configure the
+ * SSI for I2S.
+ */
+static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ u32 stcr = 0, srcr = 0, scr;
+
+ /*
+ * This is done to avoid this function to modify
+ * previous set values in stcr
+ */
+ stcr = SSI1_STCR;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ scr = SSI1_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+ else
+ scr = SSI2_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+
+ if (scr & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ /* DAI mode */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* data on rising edge of bclk, frame low 1clk before data */
+ stcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+ srcr |= SSI_SRCR_RFSI | SSI_SRCR_REFS | SSI_SRCR_RXBIT0;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ /* data on rising edge of bclk, frame high with data */
+ stcr |= SSI_STCR_TXBIT0;
+ srcr |= SSI_SRCR_RXBIT0;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ /* data on rising edge of bclk, frame high with data */
+ stcr |= SSI_STCR_TFSL;
+ srcr |= SSI_SRCR_RFSL;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ /* data on rising edge of bclk, frame high 1clk before data */
+ stcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+ srcr |= SSI_SRCR_RFSL | SSI_SRCR_REFS;
+ break;
+ }
+
+ /* DAI clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_IF:
+ stcr |= SSI_STCR_TFSI;
+ stcr &= ~SSI_STCR_TSCKP;
+ srcr |= SSI_SRCR_RFSI;
+ srcr &= ~SSI_SRCR_RSCKP;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ stcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+ srcr &= ~(SSI_SRCR_RSCKP | SSI_SRCR_RFSI);
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ stcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+ srcr |= SSI_SRCR_RFSI | SSI_SRCR_RSCKP;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ stcr &= ~SSI_STCR_TFSI;
+ stcr |= SSI_STCR_TSCKP;
+ srcr &= ~SSI_SRCR_RFSI;
+ srcr |= SSI_SRCR_RSCKP;
+ break;
+ }
+
+ /* DAI clock master masks */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ stcr |= SSI_STCR_TFDIR | SSI_STCR_TXDIR;
+ srcr |= SSI_SRCR_RFDIR | SSI_SRCR_RXDIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ stcr |= SSI_STCR_TFDIR;
+ srcr |= SSI_SRCR_RFDIR;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ stcr |= SSI_STCR_TXDIR;
+ srcr |= SSI_SRCR_RXDIR;
+ break;
+ }
+
+ /* sync */
+ if (!(fmt & SND_SOC_DAIFMT_ASYNC))
+ scr |= SSI_SCR_SYN;
+
+ /* tdm - only for stereo atm */
+ if (fmt & SND_SOC_DAIFMT_TDM)
+ scr |= SSI_SCR_NET;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCR = stcr;
+ SSI1_SRCR = srcr;
+ SSI1_SCR = scr;
+ } else {
+ SSI2_STCR = stcr;
+ SSI2_SRCR = srcr;
+ SSI2_SCR = scr;
+ }
+
+ return 0;
+}
+
+static int imx_ssi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set up TX DMA params */
+ switch (cpu_dai->id) {
+ case IMX_DAI_SSI0:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out0;
+ break;
+ case IMX_DAI_SSI1:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out1;
+ break;
+ case IMX_DAI_SSI2:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out0;
+ break;
+ case IMX_DAI_SSI3:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out1;
+ }
+ pr_debug("%s: (playback)\n", __func__);
+ } else {
+ /* set up RX DMA params */
+ switch (cpu_dai->id) {
+ case IMX_DAI_SSI0:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in0;
+ break;
+ case IMX_DAI_SSI1:
+ cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in1;
+ break;
+ case IMX_DAI_SSI2:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in0;
+ break;
+ case IMX_DAI_SSI3:
+ cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in1;
+ }
+ pr_debug("%s: (capture)\n", __func__);
+ }
+
+ /*
+ * we cant really change any SSI values after SSI is enabled
+ * need to fix in software for max flexibility - lrg
+ */
+ if (cpu_dai->active) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+
+ /* reset the SSI port - Sect 45.4.4 */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+
+ if (!ssi_clk0)
+ return -EINVAL;
+
+ if (ssi_active[SSI1_PORT]++) {
+ pr_debug("%s: exit before reset\n", __func__);
+ return 0;
+ }
+
+ /* SSI1 Reset */
+ SSI1_SCR = 0;
+
+ SSI1_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+ SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+ } else {
+
+ if (!ssi_clk1)
+ return -EINVAL;
+
+ if (ssi_active[SSI2_PORT]++) {
+ pr_debug("%s: exit before reset\n", __func__);
+ return 0;
+ }
+
+ /* SSI2 Reset */
+ SSI2_SCR = 0;
+
+ SSI2_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+ SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+ SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+ }
+
+ return 0;
+}
+
+int imx_ssi_hw_tx_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 stccr, stcr, sier;
+
+ pr_debug("%s\n", __func__);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ stccr = SSI1_STCCR & ~SSI_STCCR_WL_MASK;
+ stcr = SSI1_STCR;
+ sier = SSI1_SIER;
+ } else {
+ stccr = SSI2_STCCR & ~SSI_STCCR_WL_MASK;
+ stcr = SSI2_STCR;
+ sier = SSI2_SIER;
+ }
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ stccr |= SSI_STCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ stccr |= SSI_STCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ stccr |= SSI_STCCR_WL(24);
+ break;
+ }
+
+ /* enable interrupts */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ stcr |= SSI_STCR_TFEN0;
+ else
+ stcr |= SSI_STCR_TFEN1;
+ sier |= SSI_SIER_TDMAE;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_STCR = stcr;
+ SSI1_STCCR = stccr;
+ SSI1_SIER = sier;
+ } else {
+ SSI2_STCR = stcr;
+ SSI2_STCCR = stccr;
+ SSI2_SIER = sier;
+ }
+
+ return 0;
+}
+
+int imx_ssi_hw_rx_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 srccr, srcr, sier;
+
+ pr_debug("%s\n", __func__);
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ srccr = SSI1_SRCCR & ~SSI_SRCCR_WL_MASK;
+ srcr = SSI1_SRCR;
+ sier = SSI1_SIER;
+ } else {
+ srccr = SSI2_SRCCR & ~SSI_SRCCR_WL_MASK;
+ srcr = SSI2_SRCR;
+ sier = SSI2_SIER;
+ }
+
+ /* DAI data (word) size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ srccr |= SSI_SRCCR_WL(16);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ srccr |= SSI_SRCCR_WL(20);
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ srccr |= SSI_SRCCR_WL(24);
+ break;
+ }
+
+ /* enable interrupts */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ srcr |= SSI_SRCR_RFEN0;
+ else
+ srcr |= SSI_SRCR_RFEN1;
+ sier |= SSI_SIER_RDMAE;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ SSI1_SRCR = srcr;
+ SSI1_SRCCR = srccr;
+ SSI1_SIER = sier;
+ } else {
+ SSI2_SRCR = srcr;
+ SSI2_SRCCR = srccr;
+ SSI2_SIER = sier;
+ }
+
+ return 0;
+}
+
+/*
+ * Should only be called when port is inactive (i.e. SSIEN = 0),
+ * although can be called multiple times by upper layers.
+ */
+int imx_ssi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ int ret;
+
+ /* cant change any parameters when SSI is running */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ if (SSI1_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ } else {
+ if (SSI2_SCR & SSI_SCR_SSIEN) {
+ printk(KERN_WARNING "Warning ssi already enabled\n");
+ return 0;
+ }
+ }
+
+ /*
+ * Configure both tx and rx params with the same settings. This is
+ * really a harware restriction because SSI must be disabled until
+ * we can change those values. If there is an active audio stream in
+ * one direction, enabling the other direction with different
+ * settings would mean disturbing the running one.
+ */
+ ret = imx_ssi_hw_tx_params(substream, params);
+ if (ret < 0)
+ return ret;
+ return imx_ssi_hw_rx_params(substream, params);
+}
+
+int imx_ssi_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ pr_debug("%s\n", __func__);
+
+ /* Enable clks here to follow SSI recommended init sequence */
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+ ret = clk_enable(ssi_clk0);
+ if (ret < 0)
+ printk(KERN_ERR "Unable to enable ssi_clk0\n");
+ } else {
+ ret = clk_enable(ssi_clk1);
+ if (ret < 0)
+ printk(KERN_ERR "Unable to enable ssi_clk1\n");
+ }
+
+ return 0;
+}
+
+static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ u32 scr;
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ scr = SSI1_SCR;
+ else
+ scr = SSI2_SCR;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr |= SSI_SCR_TE | SSI_SCR_SSIEN;
+ else
+ scr |= SSI_SCR_RE | SSI_SCR_SSIEN;
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ scr &= ~SSI_SCR_TE;
+ else
+ scr &= ~SSI_SCR_RE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+ SSI1_SCR = scr;
+ else
+ SSI2_SCR = scr;
+
+ return 0;
+}
+
+static void imx_ssi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ /* shutdown SSI if neither Tx or Rx is active */
+ if (!cpu_dai->active) {
+
+ if (cpu_dai->id == IMX_DAI_SSI0 ||
+ cpu_dai->id == IMX_DAI_SSI2) {
+
+ if (--ssi_active[SSI1_PORT] > 1)
+ return;
+
+ SSI1_SCR = 0;
+ clk_disable(ssi_clk0);
+ } else {
+ if (--ssi_active[SSI2_PORT])
+ return;
+ SSI2_SCR = 0;
+ clk_disable(ssi_clk1);
+ }
+ }
+}
+
+#ifdef CONFIG_PM
+static int imx_ssi_suspend(struct platform_device *dev,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+static int imx_ssi_resume(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+#else
+#define imx_ssi_suspend NULL
+#define imx_ssi_resume NULL
+#endif
+
+#define IMX_SSI_RATES \
+ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | \
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
+ SNDRV_PCM_RATE_96000)
+
+#define IMX_SSI_BITS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
+ .startup = imx_ssi_startup,
+ .shutdown = imx_ssi_shutdown,
+ .trigger = imx_ssi_trigger,
+ .prepare = imx_ssi_prepare,
+ .hw_params = imx_ssi_hw_params,
+ .set_sysclk = imx_ssi_set_dai_sysclk,
+ .set_clkdiv = imx_ssi_set_dai_clkdiv,
+ .set_fmt = imx_ssi_set_dai_fmt,
+ .set_tdm_slot = imx_ssi_set_dai_tdm_slot,
+};
+
+struct snd_soc_dai imx_ssi_pcm_dai[] = {
+{
+ .name = "imx-i2s-1-0",
+ .id = IMX_DAI_SSI0,
+ .suspend = imx_ssi_suspend,
+ .resume = imx_ssi_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-2-0",
+ .id = IMX_DAI_SSI1,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-1-1",
+ .id = IMX_DAI_SSI2,
+ .suspend = imx_ssi_suspend,
+ .resume = imx_ssi_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+{
+ .name = "imx-i2s-2-1",
+ .id = IMX_DAI_SSI3,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .formats = IMX_SSI_BITS,
+ .rates = IMX_SSI_RATES,},
+ .ops = &imx_ssi_pcm_dai_ops,
+},
+};
+EXPORT_SYMBOL_GPL(imx_ssi_pcm_dai);
+
+static int __init imx_ssi_init(void)
+{
+ return snd_soc_register_dais(imx_ssi_pcm_dai,
+ ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+static void __exit imx_ssi_exit(void)
+{
+ snd_soc_unregister_dais(imx_ssi_pcm_dai,
+ ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+module_init(imx_ssi_init);
+module_exit(imx_ssi_exit);
+MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com");
+MODULE_DESCRIPTION("i.MX ASoC I2S driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/mxc-ssi.h b/sound/soc/imx/mxc-ssi.h
new file mode 100644
index 0000000..12bbdc9
--- /dev/null
+++ b/sound/soc/imx/mxc-ssi.h
@@ -0,0 +1,238 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IMX_SSI_H
+#define _IMX_SSI_H
+
+#include <mach/hardware.h>
+
+/* SSI regs definition - MOVE to /arch/arm/plat-mxc/include/mach/ when stable */
+#define SSI1_IO_BASE_ADDR IO_ADDRESS(SSI1_BASE_ADDR)
+#define SSI2_IO_BASE_ADDR IO_ADDRESS(SSI2_BASE_ADDR)
+
+#define STX0 0x00
+#define STX1 0x04
+#define SRX0 0x08
+#define SRX1 0x0c
+#define SCR 0x10
+#define SISR 0x14
+#define SIER 0x18
+#define STCR 0x1c
+#define SRCR 0x20
+#define STCCR 0x24
+#define SRCCR 0x28
+#define SFCSR 0x2c
+#define STR 0x30
+#define SOR 0x34
+#define SACNT 0x38
+#define SACADD 0x3c
+#define SACDAT 0x40
+#define SATAG 0x44
+#define STMSK 0x48
+#define SRMSK 0x4c
+
+#define SSI1_STX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX0)))
+#define SSI1_STX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX1)))
+#define SSI1_SRX0 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX0)))
+#define SSI1_SRX1 (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX1)))
+#define SSI1_SCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SCR)))
+#define SSI1_SISR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SISR)))
+#define SSI1_SIER (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SIER)))
+#define SSI1_STCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCR)))
+#define SSI1_SRCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCR)))
+#define SSI1_STCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCCR)))
+#define SSI1_SRCCR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCCR)))
+#define SSI1_SFCSR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SFCSR)))
+#define SSI1_STR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STR)))
+#define SSI1_SOR (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SOR)))
+#define SSI1_SACNT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACNT)))
+#define SSI1_SACADD (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACADD)))
+#define SSI1_SACDAT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACDAT)))
+#define SSI1_SATAG (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SATAG)))
+#define SSI1_STMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STMSK)))
+#define SSI1_SRMSK (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRMSK)))
+
+
+#define SSI2_STX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX0)))
+#define SSI2_STX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX1)))
+#define SSI2_SRX0 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX0)))
+#define SSI2_SRX1 (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX1)))
+#define SSI2_SCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SCR)))
+#define SSI2_SISR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SISR)))
+#define SSI2_SIER (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SIER)))
+#define SSI2_STCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCR)))
+#define SSI2_SRCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCR)))
+#define SSI2_STCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCCR)))
+#define SSI2_SRCCR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCCR)))
+#define SSI2_SFCSR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SFCSR)))
+#define SSI2_STR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STR)))
+#define SSI2_SOR (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SOR)))
+#define SSI2_SACNT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACNT)))
+#define SSI2_SACADD (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACADD)))
+#define SSI2_SACDAT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACDAT)))
+#define SSI2_SATAG (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SATAG)))
+#define SSI2_STMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STMSK)))
+#define SSI2_SRMSK (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRMSK)))
+
+#define SSI_SCR_CLK_IST (1 << 9)
+#define SSI_SCR_TCH_EN (1 << 8)
+#define SSI_SCR_SYS_CLK_EN (1 << 7)
+#define SSI_SCR_I2S_MODE_NORM (0 << 5)
+#define SSI_SCR_I2S_MODE_MSTR (1 << 5)
+#define SSI_SCR_I2S_MODE_SLAVE (2 << 5)
+#define SSI_SCR_SYN (1 << 4)
+#define SSI_SCR_NET (1 << 3)
+#define SSI_SCR_RE (1 << 2)
+#define SSI_SCR_TE (1 << 1)
+#define SSI_SCR_SSIEN (1 << 0)
+
+#define SSI_SISR_CMDAU (1 << 18)
+#define SSI_SISR_CMDDU (1 << 17)
+#define SSI_SISR_RXT (1 << 16)
+#define SSI_SISR_RDR1 (1 << 15)
+#define SSI_SISR_RDR0 (1 << 14)
+#define SSI_SISR_TDE1 (1 << 13)
+#define SSI_SISR_TDE0 (1 << 12)
+#define SSI_SISR_ROE1 (1 << 11)
+#define SSI_SISR_ROE0 (1 << 10)
+#define SSI_SISR_TUE1 (1 << 9)
+#define SSI_SISR_TUE0 (1 << 8)
+#define SSI_SISR_TFS (1 << 7)
+#define SSI_SISR_RFS (1 << 6)
+#define SSI_SISR_TLS (1 << 5)
+#define SSI_SISR_RLS (1 << 4)
+#define SSI_SISR_RFF1 (1 << 3)
+#define SSI_SISR_RFF0 (1 << 2)
+#define SSI_SISR_TFE1 (1 << 1)
+#define SSI_SISR_TFE0 (1 << 0)
+
+#define SSI_SIER_RDMAE (1 << 22)
+#define SSI_SIER_RIE (1 << 21)
+#define SSI_SIER_TDMAE (1 << 20)
+#define SSI_SIER_TIE (1 << 19)
+#define SSI_SIER_CMDAU_EN (1 << 18)
+#define SSI_SIER_CMDDU_EN (1 << 17)
+#define SSI_SIER_RXT_EN (1 << 16)
+#define SSI_SIER_RDR1_EN (1 << 15)
+#define SSI_SIER_RDR0_EN (1 << 14)
+#define SSI_SIER_TDE1_EN (1 << 13)
+#define SSI_SIER_TDE0_EN (1 << 12)
+#define SSI_SIER_ROE1_EN (1 << 11)
+#define SSI_SIER_ROE0_EN (1 << 10)
+#define SSI_SIER_TUE1_EN (1 << 9)
+#define SSI_SIER_TUE0_EN (1 << 8)
+#define SSI_SIER_TFS_EN (1 << 7)
+#define SSI_SIER_RFS_EN (1 << 6)
+#define SSI_SIER_TLS_EN (1 << 5)
+#define SSI_SIER_RLS_EN (1 << 4)
+#define SSI_SIER_RFF1_EN (1 << 3)
+#define SSI_SIER_RFF0_EN (1 << 2)
+#define SSI_SIER_TFE1_EN (1 << 1)
+#define SSI_SIER_TFE0_EN (1 << 0)
+
+#define SSI_STCR_TXBIT0 (1 << 9)
+#define SSI_STCR_TFEN1 (1 << 8)
+#define SSI_STCR_TFEN0 (1 << 7)
+#define SSI_STCR_TFDIR (1 << 6)
+#define SSI_STCR_TXDIR (1 << 5)
+#define SSI_STCR_TSHFD (1 << 4)
+#define SSI_STCR_TSCKP (1 << 3)
+#define SSI_STCR_TFSI (1 << 2)
+#define SSI_STCR_TFSL (1 << 1)
+#define SSI_STCR_TEFS (1 << 0)
+
+#define SSI_SRCR_RXBIT0 (1 << 9)
+#define SSI_SRCR_RFEN1 (1 << 8)
+#define SSI_SRCR_RFEN0 (1 << 7)
+#define SSI_SRCR_RFDIR (1 << 6)
+#define SSI_SRCR_RXDIR (1 << 5)
+#define SSI_SRCR_RSHFD (1 << 4)
+#define SSI_SRCR_RSCKP (1 << 3)
+#define SSI_SRCR_RFSI (1 << 2)
+#define SSI_SRCR_RFSL (1 << 1)
+#define SSI_SRCR_REFS (1 << 0)
+
+#define SSI_STCCR_DIV2 (1 << 18)
+#define SSI_STCCR_PSR (1 << 15)
+#define SSI_STCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_STCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_STCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_STCCR_WL_MASK (0xf << 13)
+#define SSI_STCCR_DC_MASK (0x1f << 8)
+#define SSI_STCCR_PM_MASK (0xff << 0)
+
+#define SSI_SRCCR_DIV2 (1 << 18)
+#define SSI_SRCCR_PSR (1 << 15)
+#define SSI_SRCCR_WL(x) ((((x) - 2) >> 1) << 13)
+#define SSI_SRCCR_DC(x) (((x) & 0x1f) << 8)
+#define SSI_SRCCR_PM(x) (((x) & 0xff) << 0)
+#define SSI_SRCCR_WL_MASK (0xf << 13)
+#define SSI_SRCCR_DC_MASK (0x1f << 8)
+#define SSI_SRCCR_PM_MASK (0xff << 0)
+
+
+#define SSI_SFCSR_RFCNT1(x) (((x) & 0xf) << 28)
+#define SSI_SFCSR_TFCNT1(x) (((x) & 0xf) << 24)
+#define SSI_SFCSR_RFWM1(x) (((x) & 0xf) << 20)
+#define SSI_SFCSR_TFWM1(x) (((x) & 0xf) << 16)
+#define SSI_SFCSR_RFCNT0(x) (((x) & 0xf) << 12)
+#define SSI_SFCSR_TFCNT0(x) (((x) & 0xf) << 8)
+#define SSI_SFCSR_RFWM0(x) (((x) & 0xf) << 4)
+#define SSI_SFCSR_TFWM0(x) (((x) & 0xf) << 0)
+
+#define SSI_STR_TEST (1 << 15)
+#define SSI_STR_RCK2TCK (1 << 14)
+#define SSI_STR_RFS2TFS (1 << 13)
+#define SSI_STR_RXSTATE(x) (((x) & 0xf) << 8)
+#define SSI_STR_TXD2RXD (1 << 7)
+#define SSI_STR_TCK2RCK (1 << 6)
+#define SSI_STR_TFS2RFS (1 << 5)
+#define SSI_STR_TXSTATE(x) (((x) & 0xf) << 0)
+
+#define SSI_SOR_CLKOFF (1 << 6)
+#define SSI_SOR_RX_CLR (1 << 5)
+#define SSI_SOR_TX_CLR (1 << 4)
+#define SSI_SOR_INIT (1 << 3)
+#define SSI_SOR_WAIT(x) (((x) & 0x3) << 1)
+#define SSI_SOR_SYNRST (1 << 0)
+
+#define SSI_SACNT_FRDIV(x) (((x) & 0x3f) << 5)
+#define SSI_SACNT_WR (x << 4)
+#define SSI_SACNT_RD (x << 3)
+#define SSI_SACNT_TIF (x << 2)
+#define SSI_SACNT_FV (x << 1)
+#define SSI_SACNT_AC97EN (x << 0)
+
+/* Watermarks for FIFO's */
+#define TXFIFO_WATERMARK 0x4
+#define RXFIFO_WATERMARK 0x4
+
+/* i.MX DAI SSP ID's */
+#define IMX_DAI_SSI0 0 /* SSI1 FIFO 0 */
+#define IMX_DAI_SSI1 1 /* SSI1 FIFO 1 */
+#define IMX_DAI_SSI2 2 /* SSI2 FIFO 0 */
+#define IMX_DAI_SSI3 3 /* SSI2 FIFO 1 */
+
+/* SSI clock sources */
+#define IMX_SSP_SYS_CLK 0
+
+/* SSI audio dividers */
+#define IMX_SSI_TX_DIV_2 0
+#define IMX_SSI_TX_DIV_PSR 1
+#define IMX_SSI_TX_DIV_PM 2
+#define IMX_SSI_RX_DIV_2 3
+#define IMX_SSI_RX_DIV_PSR 4
+#define IMX_SSI_RX_DIV_PM 5
+
+
+/* SSI Div 2 */
+#define IMX_SSI_DIV_2_OFF (~SSI_STCCR_DIV2)
+#define IMX_SSI_DIV_2_ON SSI_STCCR_DIV2
+
+extern struct snd_soc_dai imx_ssi_pcm_dai[4];
+extern int get_ssi_clk(int ssi, struct device *dev);
+extern void put_ssi_clk(int ssi);
+#endif
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index b771238..2dee983 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -15,6 +15,14 @@
help
Say Y if you want to add support for SoC audio on Nokia N810.
+config SND_OMAP_SOC_AMS_DELTA
+ tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
+ depends on SND_OMAP_SOC && MACH_AMS_DELTA
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_CX20442
+ help
+ Say Y if you want to add support for SoC audio on Amstrad Delta.
+
config SND_OMAP_SOC_OSK5912
tristate "SoC Audio support for omap osk5912"
depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
@@ -72,4 +80,11 @@
help
Say Y if you want to add support for SoC audio on the Beagleboard.
+config SND_OMAP_SOC_ZOOM2
+ tristate "SoC Audio support for Zoom2"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for Soc audio on Zoom2 board.
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index a37f498..02d6947 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -7,6 +7,7 @@
# OMAP Machine Support
snd-soc-n810-objs := n810.o
+snd-soc-ams-delta-objs := ams-delta.o
snd-soc-osk5912-objs := osk5912.o
snd-soc-overo-objs := overo.o
snd-soc-omap2evm-objs := omap2evm.o
@@ -14,8 +15,10 @@
snd-soc-sdp3430-objs := sdp3430.o
snd-soc-omap3pandora-objs := omap3pandora.o
snd-soc-omap3beagle-objs := omap3beagle.o
+snd-soc-zoom2-objs := zoom2.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
+obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
@@ -23,3 +26,4 @@
obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
+obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
new file mode 100644
index 0000000..5a5166a
--- /dev/null
+++ b/sound/soc/omap/ams-delta.c
@@ -0,0 +1,646 @@
+/*
+ * ams-delta.c -- SoC audio for Amstrad E3 (Delta) videophone
+ *
+ * Copyright (C) 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * Initially based on sound/soc/omap/osk5912.x
+ * Copyright (C) 2008 Mistral Solutions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/tty.h>
+
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/board-ams-delta.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/cx20442.h"
+
+
+/* Board specific DAPM widgets */
+ const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = {
+ /* Handset */
+ SND_SOC_DAPM_MIC("Mouthpiece", NULL),
+ SND_SOC_DAPM_HP("Earpiece", NULL),
+ /* Handsfree/Speakerphone */
+ SND_SOC_DAPM_MIC("Microphone", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+/* How they are connected to codec pins */
+static const struct snd_soc_dapm_route ams_delta_audio_map[] = {
+ {"TELIN", NULL, "Mouthpiece"},
+ {"Earpiece", NULL, "TELOUT"},
+
+ {"MIC", NULL, "Microphone"},
+ {"Speaker", NULL, "SPKOUT"},
+};
+
+/*
+ * Controls, functional after the modem line discipline is activated.
+ */
+
+/* Virtual switch: audio input/output constellations */
+static const char *ams_delta_audio_mode[] =
+ {"Mixed", "Handset", "Handsfree", "Speakerphone"};
+
+/* Selection <-> pin translation */
+#define AMS_DELTA_MOUTHPIECE 0
+#define AMS_DELTA_EARPIECE 1
+#define AMS_DELTA_MICROPHONE 2
+#define AMS_DELTA_SPEAKER 3
+#define AMS_DELTA_AGC 4
+
+#define AMS_DELTA_MIXED ((1 << AMS_DELTA_EARPIECE) | \
+ (1 << AMS_DELTA_MICROPHONE))
+#define AMS_DELTA_HANDSET ((1 << AMS_DELTA_MOUTHPIECE) | \
+ (1 << AMS_DELTA_EARPIECE))
+#define AMS_DELTA_HANDSFREE ((1 << AMS_DELTA_MICROPHONE) | \
+ (1 << AMS_DELTA_SPEAKER))
+#define AMS_DELTA_SPEAKERPHONE (AMS_DELTA_HANDSFREE | (1 << AMS_DELTA_AGC))
+
+unsigned short ams_delta_audio_mode_pins[] = {
+ AMS_DELTA_MIXED,
+ AMS_DELTA_HANDSET,
+ AMS_DELTA_HANDSFREE,
+ AMS_DELTA_SPEAKERPHONE,
+};
+
+static unsigned short ams_delta_audio_agc;
+
+static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct soc_enum *control = (struct soc_enum *)kcontrol->private_value;
+ unsigned short pins;
+ int pin, changed = 0;
+
+ /* Refuse any mode changes if we are not able to control the codec. */
+ if (!codec->control_data)
+ return -EUNATCH;
+
+ if (ucontrol->value.enumerated.item[0] >= control->max)
+ return -EINVAL;
+
+ mutex_lock(&codec->mutex);
+
+ /* Translate selection to bitmap */
+ pins = ams_delta_audio_mode_pins[ucontrol->value.enumerated.item[0]];
+
+ /* Setup pins after corresponding bits if changed */
+ pin = !!(pins & (1 << AMS_DELTA_MOUTHPIECE));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Mouthpiece")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Mouthpiece");
+ else
+ snd_soc_dapm_disable_pin(codec, "Mouthpiece");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_EARPIECE));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Earpiece")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Earpiece");
+ else
+ snd_soc_dapm_disable_pin(codec, "Earpiece");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_MICROPHONE));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Microphone")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Microphone");
+ else
+ snd_soc_dapm_disable_pin(codec, "Microphone");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_SPEAKER));
+ if (pin != snd_soc_dapm_get_pin_status(codec, "Speaker")) {
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "Speaker");
+ else
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+ }
+ pin = !!(pins & (1 << AMS_DELTA_AGC));
+ if (pin != ams_delta_audio_agc) {
+ ams_delta_audio_agc = pin;
+ changed = 1;
+ if (pin)
+ snd_soc_dapm_enable_pin(codec, "AGCIN");
+ else
+ snd_soc_dapm_disable_pin(codec, "AGCIN");
+ }
+ if (changed)
+ snd_soc_dapm_sync(codec);
+
+ mutex_unlock(&codec->mutex);
+
+ return changed;
+}
+
+static int ams_delta_get_audio_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned short pins, mode;
+
+ pins = ((snd_soc_dapm_get_pin_status(codec, "Mouthpiece") <<
+ AMS_DELTA_MOUTHPIECE) |
+ (snd_soc_dapm_get_pin_status(codec, "Earpiece") <<
+ AMS_DELTA_EARPIECE));
+ if (pins)
+ pins |= (snd_soc_dapm_get_pin_status(codec, "Microphone") <<
+ AMS_DELTA_MICROPHONE);
+ else
+ pins = ((snd_soc_dapm_get_pin_status(codec, "Microphone") <<
+ AMS_DELTA_MICROPHONE) |
+ (snd_soc_dapm_get_pin_status(codec, "Speaker") <<
+ AMS_DELTA_SPEAKER) |
+ (ams_delta_audio_agc << AMS_DELTA_AGC));
+
+ for (mode = 0; mode < ARRAY_SIZE(ams_delta_audio_mode); mode++)
+ if (pins == ams_delta_audio_mode_pins[mode])
+ break;
+
+ if (mode >= ARRAY_SIZE(ams_delta_audio_mode))
+ return -EINVAL;
+
+ ucontrol->value.enumerated.item[0] = mode;
+
+ return 0;
+}
+
+static const struct soc_enum ams_delta_audio_enum[] = {
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(ams_delta_audio_mode),
+ ams_delta_audio_mode),
+};
+
+static const struct snd_kcontrol_new ams_delta_audio_controls[] = {
+ SOC_ENUM_EXT("Audio Mode", ams_delta_audio_enum[0],
+ ams_delta_get_audio_mode, ams_delta_set_audio_mode),
+};
+
+/* Hook switch */
+static struct snd_soc_jack ams_delta_hook_switch;
+static struct snd_soc_jack_gpio ams_delta_hook_switch_gpios[] = {
+ {
+ .gpio = 4,
+ .name = "hook_switch",
+ .report = SND_JACK_HEADSET,
+ .invert = 1,
+ .debounce_time = 150,
+ }
+};
+
+/* After we are able to control the codec over the modem,
+ * the hook switch can be used for dynamic DAPM reconfiguration. */
+static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = {
+ /* Handset */
+ {
+ .pin = "Mouthpiece",
+ .mask = SND_JACK_MICROPHONE,
+ },
+ {
+ .pin = "Earpiece",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ /* Handsfree */
+ {
+ .pin = "Microphone",
+ .mask = SND_JACK_MICROPHONE,
+ .invert = 1,
+ },
+ {
+ .pin = "Speaker",
+ .mask = SND_JACK_HEADPHONE,
+ .invert = 1,
+ },
+};
+
+
+/*
+ * Modem line discipline, required for making above controls functional.
+ * Activated from userspace with ldattach, possibly invoked from udev rule.
+ */
+
+/* To actually apply any modem controlled configuration changes to the codec,
+ * we must connect codec DAI pins to the modem for a moment. Be carefull not
+ * to interfere with our digital mute function that shares the same hardware. */
+static struct timer_list cx81801_timer;
+static bool cx81801_cmd_pending;
+static bool ams_delta_muted;
+static DEFINE_SPINLOCK(ams_delta_lock);
+
+static void cx81801_timeout(unsigned long data)
+{
+ int muted;
+
+ spin_lock(&ams_delta_lock);
+ cx81801_cmd_pending = 0;
+ muted = ams_delta_muted;
+ spin_unlock(&ams_delta_lock);
+
+ /* Reconnect the codec DAI back from the modem to the CPU DAI
+ * only if digital mute still off */
+ if (!muted)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, 0);
+}
+
+/* Line discipline .open() */
+static int cx81801_open(struct tty_struct *tty)
+{
+ return v253_ops.open(tty);
+}
+
+/* Line discipline .close() */
+static void cx81801_close(struct tty_struct *tty)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+
+ del_timer_sync(&cx81801_timer);
+
+ v253_ops.close(tty);
+
+ /* Prevent the hook switch from further changing the DAPM pins */
+ INIT_LIST_HEAD(&ams_delta_hook_switch.pins);
+
+ /* Revert back to default audio input/output constellation */
+ snd_soc_dapm_disable_pin(codec, "Mouthpiece");
+ snd_soc_dapm_enable_pin(codec, "Earpiece");
+ snd_soc_dapm_enable_pin(codec, "Microphone");
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+ snd_soc_dapm_disable_pin(codec, "AGCIN");
+ snd_soc_dapm_sync(codec);
+}
+
+/* Line discipline .hangup() */
+static int cx81801_hangup(struct tty_struct *tty)
+{
+ cx81801_close(tty);
+ return 0;
+}
+
+/* Line discipline .recieve_buf() */
+static void cx81801_receive(struct tty_struct *tty,
+ const unsigned char *cp, char *fp, int count)
+{
+ struct snd_soc_codec *codec = tty->disc_data;
+ const unsigned char *c;
+ int apply, ret;
+
+ if (!codec->control_data) {
+ /* First modem response, complete setup procedure */
+
+ /* Initialize timer used for config pulse generation */
+ setup_timer(&cx81801_timer, cx81801_timeout, 0);
+
+ v253_ops.receive_buf(tty, cp, fp, count);
+
+ /* Link hook switch to DAPM pins */
+ ret = snd_soc_jack_add_pins(&ams_delta_hook_switch,
+ ARRAY_SIZE(ams_delta_hook_switch_pins),
+ ams_delta_hook_switch_pins);
+ if (ret)
+ dev_warn(codec->socdev->card->dev,
+ "Failed to link hook switch to DAPM pins, "
+ "will continue with hook switch unlinked.\n");
+
+ return;
+ }
+
+ v253_ops.receive_buf(tty, cp, fp, count);
+
+ for (c = &cp[count - 1]; c >= cp; c--) {
+ if (*c != '\r')
+ continue;
+ /* Complete modem response received, apply config to codec */
+
+ spin_lock_bh(&ams_delta_lock);
+ mod_timer(&cx81801_timer, jiffies + msecs_to_jiffies(150));
+ apply = !ams_delta_muted && !cx81801_cmd_pending;
+ cx81801_cmd_pending = 1;
+ spin_unlock_bh(&ams_delta_lock);
+
+ /* Apply config pulse by connecting the codec to the modem
+ * if not already done */
+ if (apply)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+ AMS_DELTA_LATCH2_MODEM_CODEC);
+ break;
+ }
+}
+
+/* Line discipline .write_wakeup() */
+static void cx81801_wakeup(struct tty_struct *tty)
+{
+ v253_ops.write_wakeup(tty);
+}
+
+static struct tty_ldisc_ops cx81801_ops = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "cx81801",
+ .owner = THIS_MODULE,
+ .open = cx81801_open,
+ .close = cx81801_close,
+ .hangup = cx81801_hangup,
+ .receive_buf = cx81801_receive,
+ .write_wakeup = cx81801_wakeup,
+};
+
+
+/*
+ * Even if not very usefull, the sound card can still work without any of the
+ * above functonality activated. You can still control its audio input/output
+ * constellation and speakerphone gain from userspace by issueing AT commands
+ * over the modem port.
+ */
+
+static int ams_delta_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+ /* Set cpu DAI configuration */
+ return snd_soc_dai_set_fmt(rtd->dai->cpu_dai,
+ SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+}
+
+static struct snd_soc_ops ams_delta_ops = {
+ .hw_params = ams_delta_hw_params,
+};
+
+
+/* Board specific codec bias level control */
+static int ams_delta_set_bias_level(struct snd_soc_card *card,
+ enum snd_soc_bias_level level)
+{
+ struct snd_soc_codec *codec = card->codec;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET,
+ AMS_DELTA_LATCH2_MODEM_NRESET);
+ break;
+ case SND_SOC_BIAS_OFF:
+ if (codec->bias_level != SND_SOC_BIAS_OFF)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET,
+ 0);
+ }
+ codec->bias_level = level;
+
+ return 0;
+}
+
+/* Digital mute implemented using modem/CPU multiplexer.
+ * Shares hardware with codec config pulse generation */
+static bool ams_delta_muted = 1;
+
+static int ams_delta_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+ int apply;
+
+ if (ams_delta_muted == mute)
+ return 0;
+
+ spin_lock_bh(&ams_delta_lock);
+ ams_delta_muted = mute;
+ apply = !cx81801_cmd_pending;
+ spin_unlock_bh(&ams_delta_lock);
+
+ if (apply)
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+ mute ? AMS_DELTA_LATCH2_MODEM_CODEC : 0);
+ return 0;
+}
+
+/* Our codec DAI probably doesn't have its own .ops structure */
+static struct snd_soc_dai_ops ams_delta_dai_ops = {
+ .digital_mute = ams_delta_digital_mute,
+};
+
+/* Will be used if the codec ever has its own digital_mute function */
+static int ams_delta_startup(struct snd_pcm_substream *substream)
+{
+ return ams_delta_digital_mute(NULL, 0);
+}
+
+static void ams_delta_shutdown(struct snd_pcm_substream *substream)
+{
+ ams_delta_digital_mute(NULL, 1);
+}
+
+
+/*
+ * Card initialization
+ */
+
+static int ams_delta_cx20442_init(struct snd_soc_codec *codec)
+{
+ struct snd_soc_dai *codec_dai = codec->dai;
+ struct snd_soc_card *card = codec->socdev->card;
+ int ret;
+ /* Codec is ready, now add/activate board specific controls */
+
+ /* Set up digital mute if not provided by the codec */
+ if (!codec_dai->ops) {
+ codec_dai->ops = &ams_delta_dai_ops;
+ } else if (!codec_dai->ops->digital_mute) {
+ codec_dai->ops->digital_mute = ams_delta_digital_mute;
+ } else {
+ ams_delta_ops.startup = ams_delta_startup;
+ ams_delta_ops.shutdown = ams_delta_shutdown;
+ }
+
+ /* Set codec bias level */
+ ams_delta_set_bias_level(card, SND_SOC_BIAS_STANDBY);
+
+ /* Add hook switch - can be used to control the codec from userspace
+ * even if line discipline fails */
+ ret = snd_soc_jack_new(card, "hook_switch",
+ SND_JACK_HEADSET, &ams_delta_hook_switch);
+ if (ret)
+ dev_warn(card->dev,
+ "Failed to allocate resources for hook switch, "
+ "will continue without one.\n");
+ else {
+ ret = snd_soc_jack_add_gpios(&ams_delta_hook_switch,
+ ARRAY_SIZE(ams_delta_hook_switch_gpios),
+ ams_delta_hook_switch_gpios);
+ if (ret)
+ dev_warn(card->dev,
+ "Failed to set up hook switch GPIO line, "
+ "will continue with hook switch inactive.\n");
+ }
+
+ /* Register optional line discipline for over the modem control */
+ ret = tty_register_ldisc(N_V253, &cx81801_ops);
+ if (ret) {
+ dev_warn(card->dev,
+ "Failed to register line discipline, "
+ "will continue without any controls.\n");
+ return 0;
+ }
+
+ /* Add board specific DAPM widgets and routes */
+ ret = snd_soc_dapm_new_controls(codec, ams_delta_dapm_widgets,
+ ARRAY_SIZE(ams_delta_dapm_widgets));
+ if (ret) {
+ dev_warn(card->dev,
+ "Failed to register DAPM controls, "
+ "will continue without any.\n");
+ return 0;
+ }
+
+ ret = snd_soc_dapm_add_routes(codec, ams_delta_audio_map,
+ ARRAY_SIZE(ams_delta_audio_map));
+ if (ret) {
+ dev_warn(card->dev,
+ "Failed to set up DAPM routes, "
+ "will continue with codec default map.\n");
+ return 0;
+ }
+
+ /* Set up initial pin constellation */
+ snd_soc_dapm_disable_pin(codec, "Mouthpiece");
+ snd_soc_dapm_enable_pin(codec, "Earpiece");
+ snd_soc_dapm_enable_pin(codec, "Microphone");
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+ snd_soc_dapm_disable_pin(codec, "AGCIN");
+ snd_soc_dapm_disable_pin(codec, "AGCOUT");
+ snd_soc_dapm_sync(codec);
+
+ /* Add virtual switch */
+ ret = snd_soc_add_controls(codec, ams_delta_audio_controls,
+ ARRAY_SIZE(ams_delta_audio_controls));
+ if (ret)
+ dev_warn(card->dev,
+ "Failed to register audio mode control, "
+ "will continue without it.\n");
+
+ return 0;
+}
+
+/* DAI glue - connects codec <--> CPU */
+static struct snd_soc_dai_link ams_delta_dai_link = {
+ .name = "CX20442",
+ .stream_name = "CX20442",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &cx20442_dai,
+ .init = ams_delta_cx20442_init,
+ .ops = &ams_delta_ops,
+};
+
+/* Audio card driver */
+static struct snd_soc_card ams_delta_audio_card = {
+ .name = "AMS_DELTA",
+ .platform = &omap_soc_platform,
+ .dai_link = &ams_delta_dai_link,
+ .num_links = 1,
+ .set_bias_level = ams_delta_set_bias_level,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device ams_delta_snd_soc_device = {
+ .card = &ams_delta_audio_card,
+ .codec_dev = &cx20442_codec_dev,
+};
+
+/* Module init/exit */
+static struct platform_device *ams_delta_audio_platform_device;
+static struct platform_device *cx20442_platform_device;
+
+static int __init ams_delta_module_init(void)
+{
+ int ret;
+
+ if (!(machine_is_ams_delta()))
+ return -ENODEV;
+
+ ams_delta_audio_platform_device =
+ platform_device_alloc("soc-audio", -1);
+ if (!ams_delta_audio_platform_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(ams_delta_audio_platform_device,
+ &ams_delta_snd_soc_device);
+ ams_delta_snd_soc_device.dev = &ams_delta_audio_platform_device->dev;
+ *(unsigned int *)ams_delta_dai_link.cpu_dai->private_data = OMAP_MCBSP1;
+
+ ret = platform_device_add(ams_delta_audio_platform_device);
+ if (ret)
+ goto err;
+
+ /*
+ * Codec platform device could be registered from elsewhere (board?),
+ * but I do it here as it makes sense only if used with the card.
+ */
+ cx20442_platform_device = platform_device_register_simple("cx20442",
+ -1, NULL, 0);
+ return 0;
+err:
+ platform_device_put(ams_delta_audio_platform_device);
+ return ret;
+}
+module_init(ams_delta_module_init);
+
+static void __exit ams_delta_module_exit(void)
+{
+ struct snd_soc_codec *codec;
+ struct tty_struct *tty;
+
+ if (ams_delta_audio_card.codec) {
+ codec = ams_delta_audio_card.codec;
+
+ if (codec->control_data) {
+ tty = codec->control_data;
+
+ tty_hangup(tty);
+ }
+ }
+
+ if (tty_unregister_ldisc(N_V253) != 0)
+ dev_warn(&ams_delta_audio_platform_device->dev,
+ "failed to unregister V253 line discipline\n");
+
+ snd_soc_jack_free_gpios(&ams_delta_hook_switch,
+ ARRAY_SIZE(ams_delta_hook_switch_gpios),
+ ams_delta_hook_switch_gpios);
+
+ /* Keep modem power on */
+ ams_delta_set_bias_level(&ams_delta_audio_card, SND_SOC_BIAS_STANDBY);
+
+ platform_device_unregister(cx20442_platform_device);
+ platform_device_unregister(ams_delta_audio_platform_device);
+}
+module_exit(ams_delta_module_exit);
+
+MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
+MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index b60b1df..0a50593 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -22,6 +22,7 @@
*/
#include <linux/clk.h>
+#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -322,8 +323,6 @@
/* Audio private data */
static struct aic3x_setup_data n810_aic33_setup = {
- .i2c_bus = 2,
- .i2c_address = 0x18,
.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
};
@@ -337,6 +336,13 @@
static struct platform_device *n810_snd_device;
+/* temporary i2c device creation until this can be moved into the machine
+ * support file.
+*/
+static struct i2c_board_info i2c_device[] = {
+ { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }
+};
+
static int __init n810_soc_init(void)
{
int err;
@@ -345,6 +351,8 @@
if (!(machine_is_nokia_n810() || machine_is_nokia_n810_wimax()))
return -ENODEV;
+ i2c_register_board_info(1, i2c_device, ARRAY_SIZE(i2c_device));
+
n810_snd_device = platform_device_alloc("soc-audio", -1);
if (!n810_snd_device)
return -ENOMEM;
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index a5d46a7..3341f49 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -139,27 +139,67 @@
static const unsigned long omap34xx_mcbsp_port[][2] = {};
#endif
+static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
+ int dma_op_mode = omap_mcbsp_get_dma_op_mode(mcbsp_data->bus_id);
+ int samples;
+
+ /* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
+ if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+ samples = snd_pcm_lib_period_bytes(substream) >> 1;
+ else
+ samples = 1;
+
+ /* Configure McBSP internal buffer usage */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ omap_mcbsp_set_tx_threshold(mcbsp_data->bus_id, samples - 1);
+ else
+ omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, samples - 1);
+}
+
static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
+ int bus_id = mcbsp_data->bus_id;
int err = 0;
- if (cpu_is_omap343x() && mcbsp_data->bus_id == 1) {
+ if (!cpu_dai->active)
+ err = omap_mcbsp_request(bus_id);
+
+ if (cpu_is_omap343x()) {
+ int dma_op_mode = omap_mcbsp_get_dma_op_mode(bus_id);
+ int max_period;
+
/*
* McBSP2 in OMAP3 has 1024 * 32-bit internal audio buffer.
* Set constraint for minimum buffer size to the same than FIFO
* size in order to avoid underruns in playback startup because
* HW is keeping the DMA request active until FIFO is filled.
*/
- snd_pcm_hw_constraint_minmax(substream->runtime,
- SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 4096, UINT_MAX);
- }
+ if (bus_id == 1)
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+ 4096, UINT_MAX);
- if (!cpu_dai->active)
- err = omap_mcbsp_request(mcbsp_data->bus_id);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ max_period = omap_mcbsp_get_max_tx_threshold(bus_id);
+ else
+ max_period = omap_mcbsp_get_max_rx_threshold(bus_id);
+
+ max_period++;
+ max_period <<= 1;
+
+ if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+ 32, max_period);
+ }
return err;
}
@@ -183,21 +223,21 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
- int err = 0;
+ int err = 0, play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (!mcbsp_data->active++)
- omap_mcbsp_start(mcbsp_data->bus_id);
+ mcbsp_data->active++;
+ omap_mcbsp_start(mcbsp_data->bus_id, play, !play);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (!--mcbsp_data->active)
- omap_mcbsp_stop(mcbsp_data->bus_id);
+ omap_mcbsp_stop(mcbsp_data->bus_id, play, !play);
+ mcbsp_data->active--;
break;
default:
err = -EINVAL;
@@ -215,7 +255,7 @@
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
- int wlen, channels, wpf;
+ int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
unsigned long port;
unsigned int format;
@@ -231,6 +271,12 @@
} else if (cpu_is_omap343x()) {
dma = omap24xx_dma_reqs[bus_id][substream->stream];
port = omap34xx_mcbsp_port[bus_id][substream->stream];
+ omap_mcbsp_dai_dma_params[id][substream->stream].set_threshold =
+ omap_mcbsp_set_threshold;
+ /* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
+ if (omap_mcbsp_get_dma_op_mode(bus_id) ==
+ MCBSP_DMA_MODE_THRESHOLD)
+ sync_mode = OMAP_DMA_SYNC_FRAME;
} else {
return -ENODEV;
}
@@ -238,6 +284,7 @@
substream->stream ? "Audio Capture" : "Audio Playback";
omap_mcbsp_dai_dma_params[id][substream->stream].dma_req = dma;
omap_mcbsp_dai_dma_params[id][substream->stream].port_addr = port;
+ omap_mcbsp_dai_dma_params[id][substream->stream].sync_mode = sync_mode;
cpu_dai->dma_data = &omap_mcbsp_dai_dma_params[id][substream->stream];
if (mcbsp_data->configured) {
@@ -321,11 +368,14 @@
/* Generic McBSP register settings */
regs->spcr2 |= XINTM(3) | FREE;
regs->spcr1 |= RINTM(3);
- regs->rcr2 |= RFIG;
- regs->xcr2 |= XFIG;
+ /* RFIG and XFIG are not defined in 34xx */
+ if (!cpu_is_omap34xx()) {
+ regs->rcr2 |= RFIG;
+ regs->xcr2 |= XFIG;
+ }
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
- regs->xccr = DXENDLY(1) | XDMAEN;
- regs->rccr = RFULL_CYCLE | RDMAEN;
+ regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE;
+ regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
@@ -462,6 +512,40 @@
return 0;
}
+static int omap_mcbsp_dai_set_rcvr_src(struct omap_mcbsp_data *mcbsp_data,
+ int clk_id)
+{
+ int sel_bit, set = 0;
+ u16 reg = OMAP2_CONTROL_DEVCONF0;
+
+ if (cpu_class_is_omap1())
+ return -EINVAL; /* TODO: Can this be implemented for OMAP1? */
+ if (mcbsp_data->bus_id != 0)
+ return -EINVAL;
+
+ switch (clk_id) {
+ case OMAP_MCBSP_CLKR_SRC_CLKX:
+ set = 1;
+ case OMAP_MCBSP_CLKR_SRC_CLKR:
+ sel_bit = 3;
+ break;
+ case OMAP_MCBSP_FSR_SRC_FSX:
+ set = 1;
+ case OMAP_MCBSP_FSR_SRC_FSR:
+ sel_bit = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (set)
+ omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg);
+ else
+ omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg);
+
+ return 0;
+}
+
static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq,
int dir)
@@ -484,6 +568,13 @@
case OMAP_MCBSP_SYSCLK_CLKR_EXT:
regs->pcr0 |= SCLKME;
break;
+
+ case OMAP_MCBSP_CLKR_SRC_CLKR:
+ case OMAP_MCBSP_CLKR_SRC_CLKX:
+ case OMAP_MCBSP_FSR_SRC_FSR:
+ case OMAP_MCBSP_FSR_SRC_FSX:
+ err = omap_mcbsp_dai_set_rcvr_src(mcbsp_data, clk_id);
+ break;
default:
err = -ENODEV;
}
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index c8147aa..647d2f9 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -32,6 +32,10 @@
OMAP_MCBSP_SYSCLK_CLK, /* Internal ICLK */
OMAP_MCBSP_SYSCLK_CLKX_EXT, /* External CLKX pin */
OMAP_MCBSP_SYSCLK_CLKR_EXT, /* External CLKR pin */
+ OMAP_MCBSP_CLKR_SRC_CLKR, /* CLKR from CLKR pin */
+ OMAP_MCBSP_CLKR_SRC_CLKX, /* CLKR from CLKX pin */
+ OMAP_MCBSP_FSR_SRC_FSR, /* FSR from FSR pin */
+ OMAP_MCBSP_FSR_SRC_FSX, /* FSR from FSX pin */
};
/* McBSP dividers */
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 84a1950..5735945 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -59,16 +59,31 @@
struct omap_runtime_data *prtd = runtime->private_data;
unsigned long flags;
- if (cpu_is_omap1510()) {
+ if ((cpu_is_omap1510()) &&
+ (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)) {
/*
- * OMAP1510 doesn't support DMA chaining so have to restart
- * the transfer after all periods are transferred
+ * OMAP1510 doesn't fully support DMA progress counter
+ * and there is no software emulation implemented yet,
+ * so have to maintain our own playback progress counter
+ * that can be used by omap_pcm_pointer() instead.
*/
spin_lock_irqsave(&prtd->lock, flags);
+ if ((stat == OMAP_DMA_LAST_IRQ) &&
+ (prtd->period_index == runtime->periods - 1)) {
+ /* we are in sync, do nothing */
+ spin_unlock_irqrestore(&prtd->lock, flags);
+ return;
+ }
if (prtd->period_index >= 0) {
- if (++prtd->period_index == runtime->periods) {
+ if (stat & OMAP_DMA_BLOCK_IRQ) {
+ /* end of buffer reached, loop back */
prtd->period_index = 0;
- omap_start_dma(prtd->dma_ch);
+ } else if (stat & OMAP_DMA_LAST_IRQ) {
+ /* update the counter for the last period */
+ prtd->period_index = runtime->periods - 1;
+ } else if (++prtd->period_index >= runtime->periods) {
+ /* end of buffer missed? loop back */
+ prtd->period_index = 0;
}
}
spin_unlock_irqrestore(&prtd->lock, flags);
@@ -100,7 +115,7 @@
prtd->dma_data = dma_data;
err = omap_request_dma(dma_data->dma_req, dma_data->name,
omap_pcm_dma_irq, substream, &prtd->dma_ch);
- if (!err && !cpu_is_omap1510()) {
+ if (!err) {
/*
* Link channel with itself so DMA doesn't need any
* reprogramming while looping the buffer
@@ -119,8 +134,7 @@
if (prtd->dma_data == NULL)
return 0;
- if (!cpu_is_omap1510())
- omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch);
+ omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch);
omap_free_dma(prtd->dma_ch);
prtd->dma_data = NULL;
@@ -148,7 +162,7 @@
*/
dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
dma_params.trigger = dma_data->dma_req;
- dma_params.sync_mode = OMAP_DMA_SYNC_ELEMENT;
+ dma_params.sync_mode = dma_data->sync_mode;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dma_params.src_amode = OMAP_DMA_AMODE_POST_INC;
dma_params.dst_amode = OMAP_DMA_AMODE_CONSTANT;
@@ -174,7 +188,15 @@
dma_params.frame_count = runtime->periods;
omap_set_dma_params(prtd->dma_ch, &dma_params);
- omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
+ if ((cpu_is_omap1510()) &&
+ (substream->stream == SNDRV_PCM_STREAM_PLAYBACK))
+ omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
+ OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
+ else
+ omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
+
+ omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
return 0;
}
@@ -183,6 +205,7 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
+ struct omap_pcm_dma_data *dma_data = prtd->dma_data;
unsigned long flags;
int ret = 0;
@@ -192,6 +215,10 @@
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->period_index = 0;
+ /* Configure McBSP internal buffer usage */
+ if (dma_data->set_threshold)
+ dma_data->set_threshold(substream);
+
omap_start_dma(prtd->dma_ch);
break;
@@ -288,7 +315,7 @@
.mmap = omap_pcm_mmap,
};
-static u64 omap_pcm_dmamask = DMA_BIT_MASK(32);
+static u64 omap_pcm_dmamask = DMA_BIT_MASK(64);
static int omap_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
int stream)
@@ -330,7 +357,7 @@
}
}
-int omap_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+static int omap_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
struct snd_pcm *pcm)
{
int ret = 0;
@@ -338,7 +365,7 @@
if (!card->dev->dma_mask)
card->dev->dma_mask = &omap_pcm_dmamask;
if (!card->dev->coherent_dma_mask)
- card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+ card->dev->coherent_dma_mask = DMA_BIT_MASK(64);
if (dai->playback.channels_min) {
ret = omap_pcm_preallocate_dma_buffer(pcm,
diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h
index 8d9d269..38a821d 100644
--- a/sound/soc/omap/omap-pcm.h
+++ b/sound/soc/omap/omap-pcm.h
@@ -29,6 +29,8 @@
char *name; /* stream identifier */
int dma_req; /* DMA request line */
unsigned long port_addr; /* transmit/receive register */
+ int sync_mode; /* DMA sync mode */
+ void (*set_threshold)(struct snd_pcm_substream *substream);
};
extern struct snd_soc_platform omap_soc_platform;
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index b719e5d..4a3f62d 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -24,6 +24,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
@@ -39,6 +40,11 @@
#include "omap-pcm.h"
#include "../codecs/twl4030.h"
+/* TWL4030 PMBR1 Register */
+#define TWL4030_INTBR_PMBR1 0x0D
+/* TWL4030 PMBR1 Register GPIO6 mux bit */
+#define TWL4030_GPIO6_PWM0_MUTE(value) (value << 2)
+
static struct snd_soc_card snd_soc_sdp3430;
static int sdp3430_hw_params(struct snd_pcm_substream *substream,
@@ -96,7 +102,7 @@
ret = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_DSP_A |
SND_SOC_DAIFMT_IB_NF |
- SND_SOC_DAIFMT_CBS_CFM);
+ SND_SOC_DAIFMT_CBM_CFM);
if (ret) {
printk(KERN_ERR "can't set codec DAI configuration\n");
return ret;
@@ -280,6 +286,7 @@
static struct twl4030_setup_data twl4030_setup = {
.ramp_delay_value = 3,
.sysclk = 26000,
+ .hs_extmute = 1,
};
/* Audio subsystem */
@@ -294,6 +301,7 @@
static int __init sdp3430_soc_init(void)
{
int ret;
+ u8 pin_mux;
if (!machine_is_omap_3430sdp()) {
pr_debug("Not SDP3430!\n");
@@ -312,6 +320,14 @@
*(unsigned int *)sdp3430_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
*(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
+ /* Set TWL4030 GPIO6 as EXTMUTE signal */
+ twl4030_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux,
+ TWL4030_INTBR_PMBR1);
+ pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03);
+ pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02);
+ twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux,
+ TWL4030_INTBR_PMBR1);
+
ret = platform_device_add(sdp3430_snd_device);
if (ret)
goto err1;
diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c
new file mode 100644
index 0000000..f90b45f
--- /dev/null
+++ b/sound/soc/omap/zoom2.c
@@ -0,0 +1,314 @@
+/*
+ * zoom2.c -- SoC audio for Zoom2
+ *
+ * Author: Misael Lopez Cruz <x0052729@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+#define ZOOM2_HEADSET_MUX_GPIO (OMAP_MAX_GPIO_LINES + 15)
+#define ZOOM2_HEADSET_EXTMUTE_GPIO 153
+
+static int zoom2_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops zoom2_ops = {
+ .hw_params = zoom2_hw_params,
+};
+
+static int zoom2_hw_voice_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops zoom2_voice_ops = {
+ .hw_params = zoom2_hw_voice_params,
+};
+
+/* Zoom2 machine DAPM */
+static const struct snd_soc_dapm_widget zoom2_twl4030_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Ext Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_HP("Headset Stereophone", NULL),
+ SND_SOC_DAPM_LINE("Aux In", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* External Mics: MAINMIC, SUBMIC with bias*/
+ {"MAINMIC", NULL, "Mic Bias 1"},
+ {"SUBMIC", NULL, "Mic Bias 2"},
+ {"Mic Bias 1", NULL, "Ext Mic"},
+ {"Mic Bias 2", NULL, "Ext Mic"},
+
+ /* External Speakers: HFL, HFR */
+ {"Ext Spk", NULL, "HFL"},
+ {"Ext Spk", NULL, "HFR"},
+
+ /* Headset Stereophone: HSOL, HSOR */
+ {"Headset Stereophone", NULL, "HSOL"},
+ {"Headset Stereophone", NULL, "HSOR"},
+
+ /* Headset Mic: HSMIC with bias */
+ {"HSMIC", NULL, "Headset Mic Bias"},
+ {"Headset Mic Bias", NULL, "Headset Mic"},
+
+ /* Aux In: AUXL, AUXR */
+ {"Aux In", NULL, "AUXL"},
+ {"Aux In", NULL, "AUXR"},
+};
+
+static int zoom2_twl4030_init(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ /* Add Zoom2 specific widgets */
+ ret = snd_soc_dapm_new_controls(codec, zoom2_twl4030_dapm_widgets,
+ ARRAY_SIZE(zoom2_twl4030_dapm_widgets));
+ if (ret)
+ return ret;
+
+ /* Set up Zoom2 specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ /* Zoom2 connected pins */
+ snd_soc_dapm_enable_pin(codec, "Ext Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+ snd_soc_dapm_enable_pin(codec, "Headset Mic");
+ snd_soc_dapm_enable_pin(codec, "Headset Stereophone");
+ snd_soc_dapm_enable_pin(codec, "Aux In");
+
+ /* TWL4030 not connected pins */
+ snd_soc_dapm_nc_pin(codec, "CARKITMIC");
+ snd_soc_dapm_nc_pin(codec, "DIGIMIC0");
+ snd_soc_dapm_nc_pin(codec, "DIGIMIC1");
+
+ snd_soc_dapm_nc_pin(codec, "OUTL");
+ snd_soc_dapm_nc_pin(codec, "OUTR");
+ snd_soc_dapm_nc_pin(codec, "EARPIECE");
+ snd_soc_dapm_nc_pin(codec, "PREDRIVEL");
+ snd_soc_dapm_nc_pin(codec, "PREDRIVER");
+ snd_soc_dapm_nc_pin(codec, "CARKITL");
+ snd_soc_dapm_nc_pin(codec, "CARKITR");
+
+ ret = snd_soc_dapm_sync(codec);
+
+ return ret;
+}
+
+static int zoom2_twl4030_voice_init(struct snd_soc_codec *codec)
+{
+ unsigned short reg;
+
+ /* Enable voice interface */
+ reg = codec->read(codec, TWL4030_REG_VOICE_IF);
+ reg |= TWL4030_VIF_DIN_EN | TWL4030_VIF_DOUT_EN | TWL4030_VIF_EN;
+ codec->write(codec, TWL4030_REG_VOICE_IF, reg);
+
+ return 0;
+}
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link zoom2_dai[] = {
+ {
+ .name = "TWL4030 I2S",
+ .stream_name = "TWL4030 Audio",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+ .init = zoom2_twl4030_init,
+ .ops = &zoom2_ops,
+ },
+ {
+ .name = "TWL4030 PCM",
+ .stream_name = "TWL4030 Voice",
+ .cpu_dai = &omap_mcbsp_dai[1],
+ .codec_dai = &twl4030_dai[TWL4030_DAI_VOICE],
+ .init = zoom2_twl4030_voice_init,
+ .ops = &zoom2_voice_ops,
+ },
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_zoom2 = {
+ .name = "Zoom2",
+ .platform = &omap_soc_platform,
+ .dai_link = zoom2_dai,
+ .num_links = ARRAY_SIZE(zoom2_dai),
+};
+
+/* EXTMUTE callback function */
+void zoom2_set_hs_extmute(int mute)
+{
+ gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
+}
+
+/* twl4030 setup */
+static struct twl4030_setup_data twl4030_setup = {
+ .ramp_delay_value = 3, /* 161 ms */
+ .sysclk = 26000,
+ .hs_extmute = 1,
+ .set_hs_extmute = zoom2_set_hs_extmute,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device zoom2_snd_devdata = {
+ .card = &snd_soc_zoom2,
+ .codec_dev = &soc_codec_dev_twl4030,
+ .codec_data = &twl4030_setup,
+};
+
+static struct platform_device *zoom2_snd_device;
+
+static int __init zoom2_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_omap_zoom2()) {
+ pr_debug("Not Zoom2!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "Zoom2 SoC init\n");
+
+ zoom2_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!zoom2_snd_device) {
+ printk(KERN_ERR "Platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(zoom2_snd_device, &zoom2_snd_devdata);
+ zoom2_snd_devdata.dev = &zoom2_snd_device->dev;
+ *(unsigned int *)zoom2_dai[0].cpu_dai->private_data = 1; /* McBSP2 */
+ *(unsigned int *)zoom2_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
+
+ ret = platform_device_add(zoom2_snd_device);
+ if (ret)
+ goto err1;
+
+ BUG_ON(gpio_request(ZOOM2_HEADSET_MUX_GPIO, "hs_mux") < 0);
+ gpio_direction_output(ZOOM2_HEADSET_MUX_GPIO, 0);
+
+ BUG_ON(gpio_request(ZOOM2_HEADSET_EXTMUTE_GPIO, "ext_mute") < 0);
+ gpio_direction_output(ZOOM2_HEADSET_EXTMUTE_GPIO, 0);
+
+ return 0;
+
+err1:
+ printk(KERN_ERR "Unable to add platform device\n");
+ platform_device_put(zoom2_snd_device);
+
+ return ret;
+}
+module_init(zoom2_soc_init);
+
+static void __exit zoom2_soc_exit(void)
+{
+ gpio_free(ZOOM2_HEADSET_MUX_GPIO);
+ gpio_free(ZOOM2_HEADSET_EXTMUTE_GPIO);
+
+ platform_device_unregister(zoom2_snd_device);
+}
+module_exit(zoom2_soc_exit);
+
+MODULE_AUTHOR("Misael Lopez Cruz <x0052729@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC Zoom2");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 326955d..9f7c61e 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -20,12 +20,14 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
+#include <sound/uda1380.h>
#include <mach/magician.h>
#include <asm/mach-types.h>
@@ -188,7 +190,7 @@
if (ret < 0)
return ret;
- ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 1);
+ ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 0, 1, width);
if (ret < 0)
return ret;
@@ -447,34 +449,47 @@
.platform = &pxa2xx_soc_platform,
};
-/* magician audio private data */
-static struct uda1380_setup_data magician_uda1380_setup = {
- .i2c_address = 0x18,
- .dac_clk = UDA1380_DAC_CLK_WSPLL,
-};
-
/* magician audio subsystem */
static struct snd_soc_device magician_snd_devdata = {
.card = &snd_soc_card_magician,
.codec_dev = &soc_codec_dev_uda1380,
- .codec_data = &magician_uda1380_setup,
};
static struct platform_device *magician_snd_device;
+/*
+ * FIXME: move into magician board file once merged into the pxa tree
+ */
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = EGPIO_MAGICIAN_CODEC_POWER,
+ .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET,
+ .dac_clk = UDA1380_DAC_CLK_WSPLL,
+};
+
+static struct i2c_board_info i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x18),
+ .platform_data = &uda1380_info,
+ },
+};
+
static int __init magician_init(void)
{
int ret;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
if (!machine_is_magician())
return -ENODEV;
- ret = gpio_request(EGPIO_MAGICIAN_CODEC_POWER, "CODEC_POWER");
- if (ret)
- goto err_request_power;
- ret = gpio_request(EGPIO_MAGICIAN_CODEC_RESET, "CODEC_RESET");
- if (ret)
- goto err_request_reset;
+ adapter = i2c_get_adapter(0);
+ if (!adapter)
+ return -ENODEV;
+ client = i2c_new_device(adapter, i2c_board_info);
+ i2c_put_adapter(adapter);
+ if (!client)
+ return -ENODEV;
+
ret = gpio_request(EGPIO_MAGICIAN_SPK_POWER, "SPK_POWER");
if (ret)
goto err_request_spk;
@@ -491,14 +506,8 @@
if (ret)
goto err_request_in_sel1;
- gpio_set_value(EGPIO_MAGICIAN_CODEC_POWER, 1);
gpio_set_value(EGPIO_MAGICIAN_IN_SEL0, 0);
- /* we may need to have the clock running here - pH5 */
- gpio_set_value(EGPIO_MAGICIAN_CODEC_RESET, 1);
- udelay(5);
- gpio_set_value(EGPIO_MAGICIAN_CODEC_RESET, 0);
-
magician_snd_device = platform_device_alloc("soc-audio", -1);
if (!magician_snd_device) {
ret = -ENOMEM;
@@ -526,10 +535,6 @@
err_request_ep:
gpio_free(EGPIO_MAGICIAN_SPK_POWER);
err_request_spk:
- gpio_free(EGPIO_MAGICIAN_CODEC_RESET);
-err_request_reset:
- gpio_free(EGPIO_MAGICIAN_CODEC_POWER);
-err_request_power:
return ret;
}
@@ -540,15 +545,12 @@
gpio_set_value(EGPIO_MAGICIAN_SPK_POWER, 0);
gpio_set_value(EGPIO_MAGICIAN_EP_POWER, 0);
gpio_set_value(EGPIO_MAGICIAN_MIC_POWER, 0);
- gpio_set_value(EGPIO_MAGICIAN_CODEC_POWER, 0);
gpio_free(EGPIO_MAGICIAN_IN_SEL1);
gpio_free(EGPIO_MAGICIAN_IN_SEL0);
gpio_free(EGPIO_MAGICIAN_MIC_POWER);
gpio_free(EGPIO_MAGICIAN_EP_POWER);
gpio_free(EGPIO_MAGICIAN_SPK_POWER);
- gpio_free(EGPIO_MAGICIAN_CODEC_RESET);
- gpio_free(EGPIO_MAGICIAN_CODEC_POWER);
}
module_init(magician_init);
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index e6102fd..1f96e32 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -17,13 +17,12 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
+#include <sound/jack.h>
#include <asm/mach-types.h>
#include <mach/audio.h>
@@ -33,90 +32,31 @@
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
-static int palm27x_jack_func = 1;
-static int palm27x_spk_func = 1;
-static int palm27x_ep_gpio = -1;
+static struct snd_soc_jack hs_jack;
-static void palm27x_ext_control(struct snd_soc_codec *codec)
-{
- if (!palm27x_spk_func)
- snd_soc_dapm_enable_pin(codec, "Speaker");
- else
- snd_soc_dapm_disable_pin(codec, "Speaker");
-
- if (!palm27x_jack_func)
- snd_soc_dapm_enable_pin(codec, "Headphone Jack");
- else
- snd_soc_dapm_disable_pin(codec, "Headphone Jack");
-
- snd_soc_dapm_sync(codec);
-}
-
-static int palm27x_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_codec *codec = rtd->socdev->card->codec;
-
- /* check the jack status at stream startup */
- palm27x_ext_control(codec);
- return 0;
-}
-
-static struct snd_soc_ops palm27x_ops = {
- .startup = palm27x_startup,
+/* Headphones jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+ {
+ .pin = "Headphone Jack",
+ .mask = SND_JACK_HEADPHONE,
+ },
};
-static irqreturn_t palm27x_interrupt(int irq, void *v)
-{
- palm27x_spk_func = gpio_get_value(palm27x_ep_gpio);
- palm27x_jack_func = !palm27x_spk_func;
- return IRQ_HANDLED;
-}
+/* Headphones jack detection gpios */
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+ [0] = {
+ /* gpio is set on per-platform basis */
+ .name = "hp-gpio",
+ .report = SND_JACK_HEADPHONE,
+ .debounce_time = 200,
+ },
+};
-static int palm27x_get_jack(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = palm27x_jack_func;
- return 0;
-}
-
-static int palm27x_set_jack(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
- if (palm27x_jack_func == ucontrol->value.integer.value[0])
- return 0;
-
- palm27x_jack_func = ucontrol->value.integer.value[0];
- palm27x_ext_control(codec);
- return 1;
-}
-
-static int palm27x_get_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = palm27x_spk_func;
- return 0;
-}
-
-static int palm27x_set_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
- if (palm27x_spk_func == ucontrol->value.integer.value[0])
- return 0;
-
- palm27x_spk_func = ucontrol->value.integer.value[0];
- palm27x_ext_control(codec);
- return 1;
-}
-
-/* PalmTX machine dapm widgets */
+/* Palm27x machine dapm widgets */
static const struct snd_soc_dapm_widget palm27x_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
- SND_SOC_DAPM_SPK("Speaker", NULL),
+ SND_SOC_DAPM_SPK("Ext. Speaker", NULL),
+ SND_SOC_DAPM_MIC("Ext. Microphone", NULL),
};
/* PalmTX audio map */
@@ -126,46 +66,66 @@
{"Headphone Jack", NULL, "HPOUTR"},
/* ext speaker connected to ROUT2, LOUT2 */
- {"Speaker", NULL, "LOUT2"},
- {"Speaker", NULL, "ROUT2"},
+ {"Ext. Speaker", NULL, "LOUT2"},
+ {"Ext. Speaker", NULL, "ROUT2"},
+
+ /* mic connected to MIC1 */
+ {"Ext. Microphone", NULL, "MIC1"},
};
-static const char *jack_function[] = {"Headphone", "Off"};
-static const char *spk_function[] = {"On", "Off"};
-static const struct soc_enum palm27x_enum[] = {
- SOC_ENUM_SINGLE_EXT(2, jack_function),
- SOC_ENUM_SINGLE_EXT(2, spk_function),
-};
-
-static const struct snd_kcontrol_new palm27x_controls[] = {
- SOC_ENUM_EXT("Jack Function", palm27x_enum[0], palm27x_get_jack,
- palm27x_set_jack),
- SOC_ENUM_EXT("Speaker Function", palm27x_enum[1], palm27x_get_spk,
- palm27x_set_spk),
-};
+static struct snd_soc_card palm27x_asoc;
static int palm27x_ac97_init(struct snd_soc_codec *codec)
{
int err;
- snd_soc_dapm_nc_pin(codec, "OUT3");
- snd_soc_dapm_nc_pin(codec, "MONOOUT");
-
- /* add palm27x specific controls */
- err = snd_soc_add_controls(codec, palm27x_controls,
- ARRAY_SIZE(palm27x_controls));
- if (err < 0)
+ /* add palm27x specific widgets */
+ err = snd_soc_dapm_new_controls(codec, palm27x_dapm_widgets,
+ ARRAY_SIZE(palm27x_dapm_widgets));
+ if (err)
return err;
- /* add palm27x specific widgets */
- snd_soc_dapm_new_controls(codec, palm27x_dapm_widgets,
- ARRAY_SIZE(palm27x_dapm_widgets));
-
/* set up palm27x specific audio path audio_map */
- snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+ err = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+ if (err)
+ return err;
- snd_soc_dapm_sync(codec);
- return 0;
+ /* connected pins */
+ if (machine_is_palmld())
+ snd_soc_dapm_enable_pin(codec, "MIC1");
+ snd_soc_dapm_enable_pin(codec, "HPOUTL");
+ snd_soc_dapm_enable_pin(codec, "HPOUTR");
+ snd_soc_dapm_enable_pin(codec, "LOUT2");
+ snd_soc_dapm_enable_pin(codec, "ROUT2");
+
+ /* not connected pins */
+ snd_soc_dapm_nc_pin(codec, "OUT3");
+ snd_soc_dapm_nc_pin(codec, "MONOOUT");
+ snd_soc_dapm_nc_pin(codec, "LINEINL");
+ snd_soc_dapm_nc_pin(codec, "LINEINR");
+ snd_soc_dapm_nc_pin(codec, "PCBEEP");
+ snd_soc_dapm_nc_pin(codec, "PHONE");
+ snd_soc_dapm_nc_pin(codec, "MIC2");
+
+ err = snd_soc_dapm_sync(codec);
+ if (err)
+ return err;
+
+ /* Jack detection API stuff */
+ err = snd_soc_jack_new(&palm27x_asoc, "Headphone Jack",
+ SND_JACK_HEADPHONE, &hs_jack);
+ if (err)
+ return err;
+
+ err = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
+ hs_jack_pins);
+ if (err)
+ return err;
+
+ err = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
+ hs_jack_gpios);
+
+ return err;
}
static struct snd_soc_dai_link palm27x_dai[] = {
@@ -175,14 +135,12 @@
.cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
.codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
.init = palm27x_ac97_init,
- .ops = &palm27x_ops,
},
{
.name = "AC97 Aux",
.stream_name = "AC97 Aux",
.cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
.codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
- .ops = &palm27x_ops,
},
};
@@ -208,27 +166,17 @@
machine_is_palmld() || machine_is_palmte2()))
return -ENODEV;
- if (pdev->dev.platform_data)
- palm27x_ep_gpio = ((struct palm27x_asoc_info *)
+ if (!pdev->dev.platform_data) {
+ dev_err(&pdev->dev, "please supply platform_data\n");
+ return -ENODEV;
+ }
+
+ hs_jack_gpios[0].gpio = ((struct palm27x_asoc_info *)
(pdev->dev.platform_data))->jack_gpio;
- ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
- if (ret)
- return ret;
- ret = gpio_direction_input(palm27x_ep_gpio);
- if (ret)
- goto err_alloc;
-
- if (request_irq(gpio_to_irq(palm27x_ep_gpio), palm27x_interrupt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "Headphone jack", NULL))
- goto err_alloc;
-
palm27x_snd_device = platform_device_alloc("soc-audio", -1);
- if (!palm27x_snd_device) {
- ret = -ENOMEM;
- goto err_dev;
- }
+ if (!palm27x_snd_device)
+ return -ENOMEM;
platform_set_drvdata(palm27x_snd_device, &palm27x_snd_devdata);
palm27x_snd_devdata.dev = &palm27x_snd_device->dev;
@@ -241,18 +189,12 @@
put_device:
platform_device_put(palm27x_snd_device);
-err_dev:
- free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
-err_alloc:
- gpio_free(palm27x_ep_gpio);
return ret;
}
static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
{
- free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
- gpio_free(palm27x_ep_gpio);
platform_device_unregister(palm27x_snd_device);
return 0;
}
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 19c4540..5b9ed64 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -375,21 +375,34 @@
* Set the active slots in TDM/Network mode
*/
static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
- unsigned int mask, int slots)
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct ssp_priv *priv = cpu_dai->private_data;
struct ssp_device *ssp = priv->dev.ssp;
u32 sscr0;
- sscr0 = ssp_read_reg(ssp, SSCR0) & ~SSCR0_SlotsPerFrm(7);
+ sscr0 = ssp_read_reg(ssp, SSCR0);
+ sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
- /* set number of active slots */
- sscr0 |= SSCR0_SlotsPerFrm(slots);
+ /* set slot width */
+ if (slot_width > 16)
+ sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
+ else
+ sscr0 |= SSCR0_DataSize(slot_width);
+
+ if (slots > 1) {
+ /* enable network mode */
+ sscr0 |= SSCR0_MOD;
+
+ /* set number of active slots */
+ sscr0 |= SSCR0_SlotsPerFrm(slots);
+
+ /* set active slot mask */
+ ssp_write_reg(ssp, SSTSA, tx_mask);
+ ssp_write_reg(ssp, SSRSA, rx_mask);
+ }
ssp_write_reg(ssp, SSCR0, sscr0);
- /* set active slot mask */
- ssp_write_reg(ssp, SSTSA, mask);
- ssp_write_reg(ssp, SSRSA, mask);
return 0;
}
@@ -457,31 +470,27 @@
return -EINVAL;
}
- ssp_write_reg(ssp, SSCR0, sscr0);
- ssp_write_reg(ssp, SSCR1, sscr1);
- ssp_write_reg(ssp, SSPSP, sspsp);
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ sspsp |= SSPSP_SFRMP;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ sspsp |= SSPSP_SCMODE(2);
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
+ break;
+ default:
+ return -EINVAL;
+ }
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
sscr0 |= SSCR0_PSP;
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
-
/* See hw_params() */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- sspsp |= SSPSP_SFRMP;
- break;
- case SND_SOC_DAIFMT_NB_IF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- sspsp |= SSPSP_SCMODE(2);
- break;
- case SND_SOC_DAIFMT_IB_NF:
- sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
- break;
- default:
- return -EINVAL;
- }
break;
case SND_SOC_DAIFMT_DSP_A:
@@ -489,22 +498,6 @@
case SND_SOC_DAIFMT_DSP_B:
sscr0 |= SSCR0_MOD | SSCR0_PSP;
sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- sspsp |= SSPSP_SFRMP;
- break;
- case SND_SOC_DAIFMT_NB_IF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- sspsp |= SSPSP_SCMODE(2);
- break;
- case SND_SOC_DAIFMT_IB_NF:
- sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
- break;
- default:
- return -EINVAL;
- }
break;
default:
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index d9c94d7..e9ae7b3 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -22,6 +22,7 @@
#include <mach/hardware.h>
#include <mach/regs-ac97.h>
#include <mach/dma.h>
+#include <mach/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
@@ -241,9 +242,18 @@
static int __devinit pxa2xx_ac97_dev_probe(struct platform_device *pdev)
{
int i;
+ pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data;
- for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++)
+ if (pdev->id >= 0) {
+ dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n");
+ return -ENXIO;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++) {
pxa_ac97_dai[i].dev = &pdev->dev;
+ if (pdata && pdata->codec_pdata[0])
+ pxa_ac97_dai[i].ac97_pdata = pdata->codec_pdata[0];
+ }
/* Punt most of the init to the SoC probe; we may need the machine
* driver to do interesting things with the clocking to get us up
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index df494d1..923428f 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,6 +1,7 @@
config SND_S3C24XX_SOC
tristate "SoC Audio for the Samsung S3CXXXX chips"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
+ select S3C64XX_DMA if ARCH_S3C64XX
help
Say Y or M if you want to add support for codecs attached to
the S3C24XX AC97 or I2S interfaces. You will also need to
@@ -38,6 +39,15 @@
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
+config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
+ tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
+ depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_WM8753
+ help
+ This driver provides audio support for the Openmoko Neo FreeRunner
+ smartphone.
+
config SND_S3C24XX_SOC_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
depends on SND_S3C24XX_SOC && MACH_JIVE
@@ -57,7 +67,7 @@
config SND_S3C24XX_SOC_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
- depends on SND_S3C24XX_SOC
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
select SND_S3C2443_SOC_AC97
select SND_SOC_AC97_CODEC
help
@@ -66,7 +76,26 @@
config SND_S3C24XX_SOC_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on SND_S3C24XX_SOC
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
select SND_S3C24XX_SOC_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
+
+config SND_S3C24XX_SOC_SIMTEC
+ tristate
+ help
+ Internal node for common S3C24XX/Simtec suppor
+
+config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
+ tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_TLV320AIC23
+ select SND_S3C24XX_SOC_SIMTEC
+
+config SND_S3C24XX_SOC_SIMTEC_HERMES
+ tristate "SoC I2S Audio support for Simtec Hermes board"
+ depends on SND_S3C24XX_SOC && ARCH_S3C2410
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_TLV320AIC3X
+ select SND_S3C24XX_SOC_SIMTEC
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 07a93a2..99f5a7d 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -16,12 +16,21 @@
# S3C24XX Machine Support
snd-soc-jive-wm8750-objs := jive_wm8750.o
snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
+snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
+snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
+snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
+snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
new file mode 100644
index 0000000..0c52e36
--- /dev/null
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -0,0 +1,498 @@
+/*
+ * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02)
+ *
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory <linux@wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/regs-iis.h>
+
+#include <mach/regs-clock.h>
+#include <asm/io.h>
+#include <mach/gta02.h>
+#include "../codecs/wm8753.h"
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+
+static struct snd_soc_card neo1973_gta02;
+
+static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0, bclk = 0;
+ int ret = 0;
+ unsigned long iis_clkrate;
+
+ iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+ switch (params_rate(params)) {
+ case 8000:
+ case 16000:
+ pll_out = 12288000;
+ break;
+ case 48000:
+ bclk = WM8753_BCLK_DIV_4;
+ pll_out = 12288000;
+ break;
+ case 96000:
+ bclk = WM8753_BCLK_DIV_2;
+ pll_out = 12288000;
+ break;
+ case 11025:
+ bclk = WM8753_BCLK_DIV_16;
+ pll_out = 11289600;
+ break;
+ case 22050:
+ bclk = WM8753_BCLK_DIV_8;
+ pll_out = 11289600;
+ break;
+ case 44100:
+ bclk = WM8753_BCLK_DIV_4;
+ pll_out = 11289600;
+ break;
+ case 88200:
+ bclk = WM8753_BCLK_DIV_2;
+ pll_out = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set MCLK division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+ S3C2410_IISMOD_32FS);
+ if (ret < 0)
+ return ret;
+
+ /* set codec BCLK division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(codec_dai,
+ WM8753_BCLKDIV, bclk);
+ if (ret < 0)
+ return ret;
+
+ /* set prescaler division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+ S3C24XX_PRESCALE(4, 4));
+ if (ret < 0)
+ return ret;
+
+ /* codec PLL input is PCLK/4 */
+ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
+ iis_clkrate / 4, pll_out);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_gta02_hifi_ops = {
+ .hw_params = neo1973_gta02_hifi_hw_params,
+ .hw_free = neo1973_gta02_hifi_hw_free,
+};
+
+static int neo1973_gta02_voice_hw_params(
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ unsigned int pcmdiv = 0;
+ int ret = 0;
+ unsigned long iis_clkrate;
+
+ iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+ if (params_rate(params) != 8000)
+ return -EINVAL;
+ if (params_channels(params) != 1)
+ return -EINVAL;
+
+ pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+ /* todo: gg check mode (DSP_B) against CSR datasheet */
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
+ 12288000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set codec PCM division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
+ pcmdiv);
+ if (ret < 0)
+ return ret;
+
+ /* configue and enable PLL for 12.288MHz output */
+ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
+ iis_clkrate / 4, 12288000);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_gta02_voice_ops = {
+ .hw_params = neo1973_gta02_voice_hw_params,
+ .hw_free = neo1973_gta02_voice_hw_free,
+};
+
+#define LM4853_AMP 1
+#define LM4853_SPK 2
+
+static u8 lm4853_state;
+
+/* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+static int lm4853_set_state(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ if (val)
+ lm4853_state |= LM4853_AMP;
+ else
+ lm4853_state &= ~LM4853_AMP;
+
+ return 0;
+}
+
+static int lm4853_get_state(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
+
+ return 0;
+}
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ if (val) {
+ lm4853_state |= LM4853_SPK;
+ gpio_set_value(GTA02_GPIO_HP_IN, 0);
+ } else {
+ lm4853_state &= ~LM4853_SPK;
+ gpio_set_value(GTA02_GPIO_HP_IN, 1);
+ }
+
+ return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
+
+ return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k,
+ int event)
+{
+ gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(value));
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+ SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+ SND_SOC_DAPM_LINE("GSM Line In", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Handset Mic", NULL),
+ SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+
+/* example machine audio_mapnections */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+ /* Connections to the lm4853 amp */
+ {"Stereo Out", NULL, "LOUT1"},
+ {"Stereo Out", NULL, "ROUT1"},
+
+ /* Connections to the GSM Module */
+ {"GSM Line Out", NULL, "MONO1"},
+ {"GSM Line Out", NULL, "MONO2"},
+ {"RXP", NULL, "GSM Line In"},
+ {"RXN", NULL, "GSM Line In"},
+
+ /* Connections to Headset */
+ {"MIC1", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Headset Mic"},
+
+ /* Call Mic */
+ {"MIC2", NULL, "Mic Bias"},
+ {"MIC2N", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Handset Mic"},
+
+ /* Call Speaker */
+ {"Handset Spk", NULL, "LOUT2"},
+ {"Handset Spk", NULL, "ROUT2"},
+
+ /* Connect the ALC pins */
+ {"ACIN", NULL, "ACOP"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Stereo Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line In"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+ /* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+ SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
+ lm4853_get_state,
+ lm4853_set_state),
+ SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
+ lm4853_get_spk,
+ lm4853_set_spk),
+};
+
+/*
+ * This is an example machine initialisation for a wm8753 connected to a
+ * neo1973 GTA02.
+ */
+static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
+{
+ int err;
+
+ /* set up NC codec pins */
+ snd_soc_dapm_nc_pin(codec, "OUT3");
+ snd_soc_dapm_nc_pin(codec, "OUT4");
+ snd_soc_dapm_nc_pin(codec, "LINE1");
+ snd_soc_dapm_nc_pin(codec, "LINE2");
+
+ /* Add neo1973 gta02 specific widgets */
+ snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
+ ARRAY_SIZE(wm8753_dapm_widgets));
+
+ /* add neo1973 gta02 specific controls */
+ err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
+ ARRAY_SIZE(wm8753_neo1973_gta02_controls));
+
+ if (err < 0)
+ return err;
+
+ /* set up neo1973 gta02 specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ /* set endpoints to default off mode */
+ snd_soc_dapm_disable_pin(codec, "Stereo Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line In");
+ snd_soc_dapm_disable_pin(codec, "Headset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+/*
+ * BT Codec DAI
+ */
+static struct snd_soc_dai bt_dai = {
+ .name = "Bluetooth",
+ .id = 0,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_dai_link neo1973_gta02_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+ .name = "WM8753",
+ .stream_name = "WM8753 HiFi",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
+ .init = neo1973_gta02_wm8753_init,
+ .ops = &neo1973_gta02_hifi_ops,
+},
+{ /* Voice via BT */
+ .name = "Bluetooth",
+ .stream_name = "Voice",
+ .cpu_dai = &bt_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
+ .ops = &neo1973_gta02_voice_ops,
+},
+};
+
+static struct snd_soc_card neo1973_gta02 = {
+ .name = "neo1973-gta02",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = neo1973_gta02_dai,
+ .num_links = ARRAY_SIZE(neo1973_gta02_dai),
+};
+
+static struct snd_soc_device neo1973_gta02_snd_devdata = {
+ .card = &neo1973_gta02,
+ .codec_dev = &soc_codec_dev_wm8753,
+};
+
+static struct platform_device *neo1973_gta02_snd_device;
+
+static int __init neo1973_gta02_init(void)
+{
+ int ret;
+
+ if (!machine_is_neo1973_gta02()) {
+ printk(KERN_INFO
+ "Only GTA02 is supported by this ASoC driver\n");
+ return -ENODEV;
+ }
+
+ /* register bluetooth DAI here */
+ ret = snd_soc_register_dai(&bt_dai);
+ if (ret)
+ return ret;
+
+ neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!neo1973_gta02_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(neo1973_gta02_snd_device,
+ &neo1973_gta02_snd_devdata);
+ neo1973_gta02_snd_devdata.dev = &neo1973_gta02_snd_device->dev;
+ ret = platform_device_add(neo1973_gta02_snd_device);
+
+ if (ret) {
+ platform_device_put(neo1973_gta02_snd_device);
+ return ret;
+ }
+
+ /* Initialise GPIOs used by amp */
+ ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
+ goto err_unregister_device;
+ }
+
+ ret = gpio_direction_output(GTA02_GPIO_AMP_HP_IN, 1);
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
+ goto err_free_gpio_hp_in;
+ }
+
+ ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+ goto err_free_gpio_hp_in;
+ }
+
+ ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+ goto err_free_gpio_amp_shut;
+ }
+
+ return 0;
+
+err_free_gpio_amp_shut:
+ gpio_free(GTA02_GPIO_AMP_SHUT);
+err_free_gpio_hp_in:
+ gpio_free(GTA02_GPIO_HP_IN);
+err_unregister_device:
+ platform_device_unregister(neo1973_gta02_snd_device);
+ return ret;
+}
+module_init(neo1973_gta02_init);
+
+static void __exit neo1973_gta02_exit(void)
+{
+ snd_soc_unregister_dai(&bt_dai);
+ platform_device_unregister(neo1973_gta02_snd_device);
+ gpio_free(GTA02_GPIO_HP_IN);
+ gpio_free(GTA02_GPIO_AMP_SHUT);
+}
+module_exit(neo1973_gta02_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 1a28317..aa7af0b 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -36,6 +36,7 @@
#include <mach/dma.h>
#include "s3c-i2s-v2.h"
+#include "s3c24xx-pcm.h"
#undef S3C_IIS_V2_SUPPORTED
@@ -357,19 +358,19 @@
#endif
#ifdef CONFIG_PLAT_S3C64XX
- iismod &= ~0x606;
+ iismod &= ~(S3C64XX_IISMOD_BLC_MASK | S3C2412_IISMOD_BCLK_MASK);
/* Sample size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
/* 8 bit sample, 16fs BCLK */
- iismod |= 0x2004;
+ iismod |= (S3C64XX_IISMOD_BLC_8BIT | S3C2412_IISMOD_BCLK_16FS);
break;
case SNDRV_PCM_FORMAT_S16_LE:
/* 16 bit sample, 32fs BCLK */
break;
case SNDRV_PCM_FORMAT_S24_LE:
/* 24 bit sample, 48fs BCLK */
- iismod |= 0x4002;
+ iismod |= (S3C64XX_IISMOD_BLC_24BIT | S3C2412_IISMOD_BCLK_48FS);
break;
}
#endif
@@ -387,6 +388,8 @@
int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
unsigned long irqs;
int ret = 0;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
pr_debug("Entered %s\n", __func__);
@@ -416,6 +419,14 @@
s3c2412_snd_txctrl(i2s, 1);
local_irq_restore(irqs);
+
+ /*
+ * Load the next buffer to DMA to meet the reqirement
+ * of the auto reload mechanism of S3C24XX.
+ * This call won't bother S3C64XX.
+ */
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
break;
case SNDRV_PCM_TRIGGER_STOP:
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3f03d5d..fc1beb0 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -47,7 +47,7 @@
static DECLARE_COMPLETION(ac97_completion);
static u32 codec_ready;
-static DECLARE_MUTEX(ac97_mutex);
+static DEFINE_MUTEX(ac97_mutex);
static unsigned short s3c2443_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
@@ -56,7 +56,7 @@
u32 ac_codec_cmd;
u32 stat, addr, data;
- down(&ac97_mutex);
+ mutex_lock(&ac97_mutex);
codec_ready = S3C_AC97_GLBSTAT_CODECREADY;
ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
@@ -79,7 +79,7 @@
printk(KERN_ERR "s3c24xx-ac97: req addr = %02x,"
" rep addr = %02x\n", reg, addr);
- up(&ac97_mutex);
+ mutex_unlock(&ac97_mutex);
return (unsigned short)data;
}
@@ -90,7 +90,7 @@
u32 ac_glbctrl;
u32 ac_codec_cmd;
- down(&ac97_mutex);
+ mutex_lock(&ac97_mutex);
codec_ready = S3C_AC97_GLBSTAT_CODECREADY;
ac_codec_cmd = readl(s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
@@ -109,7 +109,7 @@
ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
writel(ac_codec_cmd, s3c24xx_ac97.regs + S3C_AC97_CODEC_CMD);
- up(&ac97_mutex);
+ mutex_unlock(&ac97_mutex);
}
@@ -290,6 +290,9 @@
struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
switch (cmd) {
@@ -312,6 +315,8 @@
}
writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
return 0;
}
@@ -334,6 +339,9 @@
int cmd, struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
switch (cmd) {
@@ -349,6 +357,8 @@
}
writel(ac_glbctrl, s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+
return 0;
}
diff --git a/sound/soc/s3c24xx/s3c24xx-ac97.h b/sound/soc/s3c24xx/s3c24xx-ac97.h
index a96dcad..e96f941 100644
--- a/sound/soc/s3c24xx/s3c24xx-ac97.h
+++ b/sound/soc/s3c24xx/s3c24xx-ac97.h
@@ -20,12 +20,6 @@
#define AC_CMD_ADDR(x) (x << 16)
#define AC_CMD_DATA(x) (x & 0xffff)
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
-#endif
-
extern struct snd_soc_dai s3c2443_ac97_dai[];
#endif /*S3C24XXAC97_H_*/
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index 556e35f..40e2c47 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -279,6 +279,9 @@
struct snd_soc_dai *dai)
{
int ret = 0;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ int channel = ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->channel;
pr_debug("Entered %s\n", __func__);
@@ -296,6 +299,8 @@
s3c24xx_snd_rxctrl(1);
else
s3c24xx_snd_txctrl(1);
+
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index eecfa5e..5cbbdc8 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -255,7 +255,6 @@
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
- s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STARTED);
break;
case SNDRV_PCM_TRIGGER_STOP:
@@ -318,6 +317,7 @@
pr_debug("Entered %s\n", __func__);
+ snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
snd_soc_set_runtime_hwparams(substream, &s3c24xx_pcm_hardware);
prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c
new file mode 100644
index 0000000..1966e0d
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.c
@@ -0,0 +1,394 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = spk_gain;
+ return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+ gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+ gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int value = ucontrol->value.integer.value[0];
+
+ spk_gain = value;
+
+ if (!spk_unmute)
+ speaker_gain_set(value);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+ SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+ speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+ pr_debug("%s: to=%d\n", __func__, to);
+
+ spk_unmute = to;
+ gpio_set_value(pdata->amp_gpio, to);
+
+ /* if we're umuting, also re-set the gain */
+ if (to && pdata->amp_gain[0] > 0)
+ speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = spk_unmute;
+ return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ spk_unmute_state(ucontrol->value.integer.value[0]);
+ return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+ SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+ speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_codec *codec)
+{
+ if (pdata->amp_gpio > 0) {
+ pr_debug("%s: adding amp routes\n", __func__);
+
+ snd_soc_add_controls(codec, amp_unmute_controls,
+ ARRAY_SIZE(amp_unmute_controls));
+ }
+
+ if (pdata->amp_gain[0] > 0) {
+ pr_debug("%s: adding amp controls\n", __func__);
+ snd_soc_add_controls(codec, amp_gain_controls,
+ ARRAY_SIZE(amp_gain_controls));
+ }
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set the CODEC as the bus clock master, I2S */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret) {
+ pr_err("%s: failed set cpu dai format\n", __func__);
+ return ret;
+ }
+
+ /* Set the CODEC as the bus clock master */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret) {
+ pr_err("%s: failed set codec dai format\n", __func__);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+ CODEC_CLOCK, SND_SOC_CLOCK_IN);
+ if (ret) {
+ pr_err( "%s: failed setting codec sysclk\n", __func__);
+ return ret;
+ }
+
+ if (pdata->use_mpllin) {
+ ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+ 0, SND_SOC_CLOCK_OUT);
+
+ if (ret) {
+ pr_err("%s: failed to set MPLLin as clksrc\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (pdata->output_cdclk) {
+ int cdclk_scale;
+
+ cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+ cdclk_scale--;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+ cdclk_scale);
+ }
+
+ return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+ /* call any board supplied startup code, this currently only
+ * covers the bast/vr1000 which have a CPLD in the way of the
+ * LRCLK */
+ if (pd->startup)
+ pd->startup();
+
+ return 0;
+}
+
+static struct snd_soc_ops simtec_snd_ops = {
+ .hw_params = simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+ struct s3c24xx_audio_simtec_pdata *pd)
+{
+ int ret;
+
+ /* attach gpio amp gain (if any) */
+ if (pdata->amp_gain[0] > 0) {
+ ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+ if (ret) {
+ dev_err(dev, "cannot get amp gpio gain0\n");
+ return ret;
+ }
+
+ ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+ if (ret) {
+ dev_err(dev, "cannot get amp gpio gain1\n");
+ gpio_free(pdata->amp_gain[0]);
+ return ret;
+ }
+
+ gpio_direction_output(pd->amp_gain[0], 0);
+ gpio_direction_output(pd->amp_gain[1], 0);
+ }
+
+ /* note, curently we assume GPA0 isn't valid amp */
+ if (pdata->amp_gpio > 0) {
+ ret = gpio_request(pd->amp_gpio, "gpio-amp");
+ if (ret) {
+ dev_err(dev, "cannot get amp gpio %d (%d)\n",
+ pd->amp_gpio, ret);
+ goto err_amp;
+ }
+
+ /* set the amp off at startup */
+ spk_unmute_state(0);
+ }
+
+ return 0;
+
+err_amp:
+ if (pd->amp_gain[0] > 0) {
+ gpio_free(pd->amp_gain[0]);
+ gpio_free(pd->amp_gain[1]);
+ }
+
+ return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+ if (pd->amp_gain[0] > 0) {
+ gpio_free(pd->amp_gain[0]);
+ gpio_free(pd->amp_gain[1]);
+ }
+
+ if (pd->amp_gpio > 0)
+ gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+int simtec_audio_resume(struct device *dev)
+{
+ simtec_call_startup(pdata);
+ return 0;
+}
+
+struct dev_pm_ops simtec_audio_pmops = {
+ .resume = simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int __devinit simtec_audio_core_probe(struct platform_device *pdev,
+ struct snd_soc_device *socdev)
+{
+ struct platform_device *snd_dev;
+ int ret;
+
+ socdev->card->dai_link->ops = &simtec_snd_ops;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ simtec_call_startup(pdata);
+
+ xtal_clk = clk_get(&pdev->dev, "xtal");
+ if (IS_ERR(xtal_clk)) {
+ dev_err(&pdev->dev, "could not get clkout0\n");
+ return -EINVAL;
+ }
+
+ dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+ ret = attach_gpio_amp(&pdev->dev, pdata);
+ if (ret)
+ goto err_clk;
+
+ snd_dev = platform_device_alloc("soc-audio", -1);
+ if (!snd_dev) {
+ dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+ ret = -ENOMEM;
+ goto err_gpio;
+ }
+
+ platform_set_drvdata(snd_dev, socdev);
+ socdev->dev = &snd_dev->dev;
+
+ ret = platform_device_add(snd_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+ goto err_pdev;
+ }
+
+ platform_set_drvdata(pdev, snd_dev);
+ return 0;
+
+err_pdev:
+ platform_device_put(snd_dev);
+
+err_gpio:
+ detach_gpio_amp(pdata);
+
+err_clk:
+ clk_put(xtal_clk);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int __devexit simtec_audio_remove(struct platform_device *pdev)
+{
+ struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+ platform_device_unregister(snd_dev);
+
+ detach_gpio_amp(pdata);
+ clk_put(xtal_clk);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h
new file mode 100644
index 0000000..2714203
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.h
@@ -0,0 +1,22 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void simtec_audio_init(struct snd_soc_codec *codec);
+
+extern int simtec_audio_core_probe(struct platform_device *pdev,
+ struct snd_soc_device *socdev);
+
+extern int simtec_audio_remove(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+extern struct dev_pm_ops simtec_audio_pmops;
+#define simtec_audio_pm &simtec_audio_pmops
+#else
+#define simtec_audio_pm NULL
+#endif
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
new file mode 100644
index 0000000..8346bd9
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
@@ -0,0 +1,153 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic3x.h"
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+ SND_SOC_DAPM_LINE("GSM Out", NULL),
+ SND_SOC_DAPM_LINE("GSM In", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_LINE("ZV", NULL),
+ SND_SOC_DAPM_MIC("Mic Jack", NULL),
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+ /* Headphone connected to HP{L,R}OUT and HP{L,R}COM */
+
+ { "Headphone Jack", NULL, "HPLOUT" },
+ { "Headphone Jack", NULL, "HPLCOM" },
+ { "Headphone Jack", NULL, "HPROUT" },
+ { "Headphone Jack", NULL, "HPRCOM" },
+
+ /* ZV connected to Line1 */
+
+ { "LINE1L", NULL, "ZV" },
+ { "LINE1R", NULL, "ZV" },
+
+ /* Line In connected to Line2 */
+
+ { "LINE2L", NULL, "Line In" },
+ { "LINE2R", NULL, "Line In" },
+
+ /* Microphone connected to MIC3R and MIC_BIAS */
+
+ { "MIC3L", NULL, "Mic Jack" },
+
+ /* GSM connected to MONO_LOUT and MIC3L (in) */
+
+ { "GSM Out", NULL, "MONO_LOUT" },
+ { "MIC3L", NULL, "GSM In" },
+
+ /* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are
+ * not using the DAPM to power it up and down as there it makes
+ * a click when powering up. */
+};
+
+/**
+ * simtec_hermes_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_hermes_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, dapm_widgets,
+ ARRAY_SIZE(dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+ snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+ snd_soc_dapm_enable_pin(codec, "Line In");
+ snd_soc_dapm_enable_pin(codec, "Line Out");
+ snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+ simtec_audio_init(codec);
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct aic3x_setup_data codec_setup = {
+};
+
+static struct snd_soc_dai_link simtec_dai_aic33 = {
+ .name = "tlv320aic33",
+ .stream_name = "TLV320AIC33",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &aic3x_dai,
+ .init = simtec_hermes_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic33 = {
+ .name = "Simtec-Hermes",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = &simtec_dai_aic33,
+ .num_links = 1,
+};
+
+/* simtec audio subsystem */
+static struct snd_soc_device simtec_snd_devdata_aic33 = {
+ .card = &snd_soc_machine_simtec_aic33,
+ .codec_dev = &soc_codec_dev_aic3x,
+ .codec_data = &codec_setup,
+};
+
+static int __devinit simtec_audio_hermes_probe(struct platform_device *pd)
+{
+ dev_info(&pd->dev, "probing....\n");
+ return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic33);
+}
+
+static struct platform_driver simtec_audio_hermes_platdrv = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c24xx-simtec-hermes-snd",
+ .pm = simtec_audio_pm,
+ },
+ .probe = simtec_audio_hermes_probe,
+ .remove = __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd");
+
+static int __init simtec_hermes_modinit(void)
+{
+ return platform_driver_register(&simtec_audio_hermes_platdrv);
+}
+
+static void __exit simtec_hermes_modexit(void)
+{
+ platform_driver_unregister(&simtec_audio_hermes_platdrv);
+}
+
+module_init(simtec_hermes_modinit);
+module_exit(simtec_hermes_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
new file mode 100644
index 0000000..25797e0
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
@@ -0,0 +1,137 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic23.h"
+
+/* supported machines:
+ *
+ * Machine Connections AMP
+ * ------- ----------- ---
+ * BAST MIC, HPOUT, LOUT, LIN TPA2001D1 (HPOUTL,R) (gain hardwired)
+ * VR1000 HPOUT, LIN None
+ * VR2000 LIN, LOUT, MIC, HP LM4871 (HPOUTL,R)
+ * DePicture LIN, LOUT, MIC, HP LM4871 (HPOUTL,R)
+ * Anubis LIN, LOUT, MIC, HP TPA2001D1 (HPOUTL,R)
+ */
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+ { "Headphone Jack", NULL, "LHPOUT"},
+ { "Headphone Jack", NULL, "RHPOUT"},
+
+ { "Line Out", NULL, "LOUT" },
+ { "Line Out", NULL, "ROUT" },
+
+ { "LLINEIN", NULL, "Line In"},
+ { "RLINEIN", NULL, "Line In"},
+
+ { "MICIN", NULL, "Mic Jack"},
+};
+
+/**
+ * simtec_tlv320aic23_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, dapm_widgets,
+ ARRAY_SIZE(dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+ snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+ snd_soc_dapm_enable_pin(codec, "Line In");
+ snd_soc_dapm_enable_pin(codec, "Line Out");
+ snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+ simtec_audio_init(codec);
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic23 = {
+ .name = "tlv320aic23",
+ .stream_name = "TLV320AIC23",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &tlv320aic23_dai,
+ .init = simtec_tlv320aic23_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic23 = {
+ .name = "Simtec",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = &simtec_dai_aic23,
+ .num_links = 1,
+};
+
+/* simtec audio subsystem */
+static struct snd_soc_device simtec_snd_devdata_aic23 = {
+ .card = &snd_soc_machine_simtec_aic23,
+ .codec_dev = &soc_codec_dev_tlv320aic23,
+};
+
+static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd)
+{
+ return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic23);
+}
+
+static struct platform_driver simtec_audio_tlv320aic23_platdrv = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c24xx-simtec-tlv320aic23",
+ .pm = simtec_audio_pm,
+ },
+ .probe = simtec_audio_tlv320aic23_probe,
+ .remove = __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23");
+
+static int __init simtec_tlv320aic23_modinit(void)
+{
+ return platform_driver_register(&simtec_audio_tlv320aic23_platdrv);
+}
+
+static void __exit simtec_tlv320aic23_modexit(void)
+{
+ platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv);
+}
+
+module_init(simtec_tlv320aic23_modinit);
+module_exit(simtec_tlv320aic23_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
index b5f95f9..c1b40ac 100644
--- a/sound/soc/s6000/s6105-ipcam.c
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -14,6 +14,7 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
@@ -189,8 +190,6 @@
/* s6105 audio private data */
static struct aic3x_setup_data s6105_aic3x_setup = {
- .i2c_bus = 0,
- .i2c_address = 0x18,
};
/* s6105 audio subsystem */
@@ -211,10 +210,19 @@
static struct platform_device *s6105_snd_device;
+/* temporary i2c device creation until this can be moved into the machine
+ * support file.
+*/
+static struct i2c_board_info i2c_device[] = {
+ { I2C_BOARD_INFO("tlv320aic33", 0x18), }
+};
+
static int __init s6105_init(void)
{
int ret;
+ i2c_register_board_info(0, i2c_device, ARRAY_SIZE(i2c_device));
+
s6105_snd_device = platform_device_alloc("soc-audio", -1);
if (!s6105_snd_device)
return -ENOMEM;
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 54bd604..9154b43 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -20,7 +20,12 @@
config SND_SOC_SH4_SSI
tristate
-
+config SND_SOC_SH4_FSI
+ tristate "SH4 FSI support"
+ depends on CPU_SUBTYPE_SH7724
+ select SH_DMA
+ help
+ This option enables FSI sound support
##
## Boards
@@ -35,4 +40,12 @@
This option enables generic sound support for the first
AC97 unit of the SH7760.
+config SND_FSI_AK4642
+ bool "FSI-AK4642 sound support"
+ depends on SND_SOC_SH4_FSI
+ select SND_SOC_AK4642
+ help
+ This option enables generic sound support for the
+ FSI - AK4642 unit
+
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index a8e8ab8..a699787 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -5,10 +5,14 @@
## audio units found on some SH-4
snd-soc-hac-objs := hac.o
snd-soc-ssi-objs := ssi.o
+snd-soc-fsi-objs := fsi.o
obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
+obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
## boards
snd-soc-sh7760-ac97-objs := sh7760-ac97.o
+snd-soc-fsi-ak4642-objs := fsi-ak4642.o
obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
+obj-$(CONFIG_SND_FSI_AK4642) += snd-soc-fsi-ak4642.o
diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c
new file mode 100644
index 0000000..c7af097
--- /dev/null
+++ b/sound/soc/sh/fsi-ak4642.c
@@ -0,0 +1,107 @@
+/*
+ * FSI-AK464x sound support for ms7724se
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <sound/sh_fsi.h>
+#include <../sound/soc/codecs/ak4642.h>
+
+static struct snd_soc_dai_link fsi_dai_link = {
+ .name = "AK4642",
+ .stream_name = "AK4642",
+ .cpu_dai = &fsi_soc_dai[0], /* fsi */
+ .codec_dai = &ak4642_dai,
+ .ops = NULL,
+};
+
+static struct snd_soc_card fsi_soc_card = {
+ .name = "FSI",
+ .platform = &fsi_soc_platform,
+ .dai_link = &fsi_dai_link,
+ .num_links = 1,
+};
+
+static struct snd_soc_device fsi_snd_devdata = {
+ .card = &fsi_soc_card,
+ .codec_dev = &soc_codec_dev_ak4642,
+};
+
+#define AK4642_BUS 0
+#define AK4642_ADR 0x12
+static int ak4642_add_i2c_device(void)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = AK4642_ADR;
+ strlcpy(info.type, "ak4642", I2C_NAME_SIZE);
+
+ adapter = i2c_get_adapter(AK4642_BUS);
+ if (!adapter) {
+ printk(KERN_DEBUG "can't get i2c adapter\n");
+ return -ENODEV;
+ }
+
+ client = i2c_new_device(adapter, &info);
+ i2c_put_adapter(adapter);
+ if (!client) {
+ printk(KERN_DEBUG "can't add i2c device\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct platform_device *fsi_snd_device;
+
+static int __init fsi_ak4642_init(void)
+{
+ int ret = -ENOMEM;
+
+ ak4642_add_i2c_device();
+
+ fsi_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!fsi_snd_device)
+ goto out;
+
+ platform_set_drvdata(fsi_snd_device,
+ &fsi_snd_devdata);
+ fsi_snd_devdata.dev = &fsi_snd_device->dev;
+ ret = platform_device_add(fsi_snd_device);
+
+ if (ret)
+ platform_device_put(fsi_snd_device);
+
+out:
+ return ret;
+}
+
+static void __exit fsi_ak4642_exit(void)
+{
+ platform_device_unregister(fsi_snd_device);
+}
+
+module_init(fsi_ak4642_init);
+module_exit(fsi_ak4642_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic SH4 FSI-AK4642 sound card");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
new file mode 100644
index 0000000..4412324
--- /dev/null
+++ b/sound/soc/sh/fsi.c
@@ -0,0 +1,1004 @@
+/*
+ * Fifo-attached Serial Interface (FSI) support for SH7724
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ssi.c
+ * Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include <sound/sh_fsi.h>
+#include <asm/atomic.h>
+#include <asm/dma.h>
+#include <asm/dma-sh.h>
+
+#define DO_FMT 0x0000
+#define DOFF_CTL 0x0004
+#define DOFF_ST 0x0008
+#define DI_FMT 0x000C
+#define DIFF_CTL 0x0010
+#define DIFF_ST 0x0014
+#define CKG1 0x0018
+#define CKG2 0x001C
+#define DIDT 0x0020
+#define DODT 0x0024
+#define MUTE_ST 0x0028
+#define REG_END MUTE_ST
+
+#define INT_ST 0x0200
+#define IEMSK 0x0204
+#define IMSK 0x0208
+#define MUTE 0x020C
+#define CLK_RST 0x0210
+#define SOFT_RST 0x0214
+#define MREG_START INT_ST
+#define MREG_END SOFT_RST
+
+/* DO_FMT */
+/* DI_FMT */
+#define CR_FMT(param) ((param) << 4)
+# define CR_MONO 0x0
+# define CR_MONO_D 0x1
+# define CR_PCM 0x2
+# define CR_I2S 0x3
+# define CR_TDM 0x4
+# define CR_TDM_D 0x5
+
+/* DOFF_CTL */
+/* DIFF_CTL */
+#define IRQ_HALF 0x00100000
+#define FIFO_CLR 0x00000001
+
+/* DOFF_ST */
+#define ERR_OVER 0x00000010
+#define ERR_UNDER 0x00000001
+
+/* CLK_RST */
+#define B_CLK 0x00000010
+#define A_CLK 0x00000001
+
+/* INT_ST */
+#define INT_B_IN (1 << 12)
+#define INT_B_OUT (1 << 8)
+#define INT_A_IN (1 << 4)
+#define INT_A_OUT (1 << 0)
+
+#define FSI_RATES SNDRV_PCM_RATE_8000_96000
+
+#define FSI_FMTS (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S16_LE)
+
+/************************************************************************
+
+
+ struct
+
+
+************************************************************************/
+struct fsi_priv {
+ void __iomem *base;
+ struct snd_pcm_substream *substream;
+
+ int fifo_max;
+ int chan;
+ int dma_chan;
+
+ int byte_offset;
+ int period_len;
+ int buffer_len;
+ int periods;
+};
+
+struct fsi_master {
+ void __iomem *base;
+ int irq;
+ struct clk *clk;
+ struct fsi_priv fsia;
+ struct fsi_priv fsib;
+ struct sh_fsi_platform_info *info;
+};
+
+static struct fsi_master *master;
+
+/************************************************************************
+
+
+ basic read write function
+
+
+************************************************************************/
+static int __fsi_reg_write(u32 reg, u32 data)
+{
+ /* valid data area is 24bit */
+ data &= 0x00ffffff;
+
+ return ctrl_outl(data, reg);
+}
+
+static u32 __fsi_reg_read(u32 reg)
+{
+ return ctrl_inl(reg);
+}
+
+static int __fsi_reg_mask_set(u32 reg, u32 mask, u32 data)
+{
+ u32 val = __fsi_reg_read(reg);
+
+ val &= ~mask;
+ val |= data & mask;
+
+ return __fsi_reg_write(reg, val);
+}
+
+static int fsi_reg_write(struct fsi_priv *fsi, u32 reg, u32 data)
+{
+ if (reg > REG_END)
+ return -1;
+
+ return __fsi_reg_write((u32)(fsi->base + reg), data);
+}
+
+static u32 fsi_reg_read(struct fsi_priv *fsi, u32 reg)
+{
+ if (reg > REG_END)
+ return 0;
+
+ return __fsi_reg_read((u32)(fsi->base + reg));
+}
+
+static int fsi_reg_mask_set(struct fsi_priv *fsi, u32 reg, u32 mask, u32 data)
+{
+ if (reg > REG_END)
+ return -1;
+
+ return __fsi_reg_mask_set((u32)(fsi->base + reg), mask, data);
+}
+
+static int fsi_master_write(u32 reg, u32 data)
+{
+ if ((reg < MREG_START) ||
+ (reg > MREG_END))
+ return -1;
+
+ return __fsi_reg_write((u32)(master->base + reg), data);
+}
+
+static u32 fsi_master_read(u32 reg)
+{
+ if ((reg < MREG_START) ||
+ (reg > MREG_END))
+ return 0;
+
+ return __fsi_reg_read((u32)(master->base + reg));
+}
+
+static int fsi_master_mask_set(u32 reg, u32 mask, u32 data)
+{
+ if ((reg < MREG_START) ||
+ (reg > MREG_END))
+ return -1;
+
+ return __fsi_reg_mask_set((u32)(master->base + reg), mask, data);
+}
+
+/************************************************************************
+
+
+ basic function
+
+
+************************************************************************/
+static struct fsi_priv *fsi_get(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd;
+ struct fsi_priv *fsi = NULL;
+
+ if (!substream || !master)
+ return NULL;
+
+ rtd = substream->private_data;
+ switch (rtd->dai->cpu_dai->id) {
+ case 0:
+ fsi = &master->fsia;
+ break;
+ case 1:
+ fsi = &master->fsib;
+ break;
+ }
+
+ return fsi;
+}
+
+static int fsi_is_port_a(struct fsi_priv *fsi)
+{
+ /* return
+ * 1 : port a
+ * 0 : port b
+ */
+
+ if (fsi == &master->fsia)
+ return 1;
+
+ return 0;
+}
+
+static u32 fsi_get_info_flags(struct fsi_priv *fsi)
+{
+ int is_porta = fsi_is_port_a(fsi);
+
+ return is_porta ? master->info->porta_flags :
+ master->info->portb_flags;
+}
+
+static int fsi_is_master_mode(struct fsi_priv *fsi, int is_play)
+{
+ u32 mode;
+ u32 flags = fsi_get_info_flags(fsi);
+
+ mode = is_play ? SH_FSI_OUT_SLAVE_MODE : SH_FSI_IN_SLAVE_MODE;
+
+ /* return
+ * 1 : master mode
+ * 0 : slave mode
+ */
+
+ return (mode & flags) != mode;
+}
+
+static u32 fsi_port_ab_io_bit(struct fsi_priv *fsi, int is_play)
+{
+ int is_porta = fsi_is_port_a(fsi);
+ u32 data;
+
+ if (is_porta)
+ data = is_play ? (1 << 0) : (1 << 4);
+ else
+ data = is_play ? (1 << 8) : (1 << 12);
+
+ return data;
+}
+
+static void fsi_stream_push(struct fsi_priv *fsi,
+ struct snd_pcm_substream *substream,
+ u32 buffer_len,
+ u32 period_len)
+{
+ fsi->substream = substream;
+ fsi->buffer_len = buffer_len;
+ fsi->period_len = period_len;
+ fsi->byte_offset = 0;
+ fsi->periods = 0;
+}
+
+static void fsi_stream_pop(struct fsi_priv *fsi)
+{
+ fsi->substream = NULL;
+ fsi->buffer_len = 0;
+ fsi->period_len = 0;
+ fsi->byte_offset = 0;
+ fsi->periods = 0;
+}
+
+static int fsi_get_fifo_residue(struct fsi_priv *fsi, int is_play)
+{
+ u32 status;
+ u32 reg = is_play ? DOFF_ST : DIFF_ST;
+ int residue;
+
+ status = fsi_reg_read(fsi, reg);
+ residue = 0x1ff & (status >> 8);
+ residue *= fsi->chan;
+
+ return residue;
+}
+
+static int fsi_get_residue(struct fsi_priv *fsi, int is_play)
+{
+ int residue;
+ int width;
+ struct snd_pcm_runtime *runtime;
+
+ runtime = fsi->substream->runtime;
+
+ /* get 1 channel data width */
+ width = frames_to_bytes(runtime, 1) / fsi->chan;
+
+ if (2 == width)
+ residue = fsi_get_fifo_residue(fsi, is_play);
+ else
+ residue = get_dma_residue(fsi->dma_chan);
+
+ return residue;
+}
+
+/************************************************************************
+
+
+ basic dma function
+
+
+************************************************************************/
+#define PORTA_DMA 0
+#define PORTB_DMA 1
+
+static int fsi_get_dma_chan(void)
+{
+ if (0 != request_dma(PORTA_DMA, "fsia"))
+ return -EIO;
+
+ if (0 != request_dma(PORTB_DMA, "fsib")) {
+ free_dma(PORTA_DMA);
+ return -EIO;
+ }
+
+ master->fsia.dma_chan = PORTA_DMA;
+ master->fsib.dma_chan = PORTB_DMA;
+
+ return 0;
+}
+
+static void fsi_free_dma_chan(void)
+{
+ dma_wait_for_completion(PORTA_DMA);
+ dma_wait_for_completion(PORTB_DMA);
+ free_dma(PORTA_DMA);
+ free_dma(PORTB_DMA);
+
+ master->fsia.dma_chan = -1;
+ master->fsib.dma_chan = -1;
+}
+
+/************************************************************************
+
+
+ ctrl function
+
+
+************************************************************************/
+static void fsi_irq_enable(struct fsi_priv *fsi, int is_play)
+{
+ u32 data = fsi_port_ab_io_bit(fsi, is_play);
+
+ fsi_master_mask_set(IMSK, data, data);
+ fsi_master_mask_set(IEMSK, data, data);
+}
+
+static void fsi_irq_disable(struct fsi_priv *fsi, int is_play)
+{
+ u32 data = fsi_port_ab_io_bit(fsi, is_play);
+
+ fsi_master_mask_set(IMSK, data, 0);
+ fsi_master_mask_set(IEMSK, data, 0);
+}
+
+static void fsi_clk_ctrl(struct fsi_priv *fsi, int enable)
+{
+ u32 val = fsi_is_port_a(fsi) ? (1 << 0) : (1 << 4);
+
+ if (enable)
+ fsi_master_mask_set(CLK_RST, val, val);
+ else
+ fsi_master_mask_set(CLK_RST, val, 0);
+}
+
+static void fsi_irq_init(struct fsi_priv *fsi, int is_play)
+{
+ u32 data;
+ u32 ctrl;
+
+ data = fsi_port_ab_io_bit(fsi, is_play);
+ ctrl = is_play ? DOFF_CTL : DIFF_CTL;
+
+ /* set IMSK */
+ fsi_irq_disable(fsi, is_play);
+
+ /* set interrupt generation factor */
+ fsi_reg_write(fsi, ctrl, IRQ_HALF);
+
+ /* clear FIFO */
+ fsi_reg_mask_set(fsi, ctrl, FIFO_CLR, FIFO_CLR);
+
+ /* clear interrupt factor */
+ fsi_master_mask_set(INT_ST, data, 0);
+}
+
+static void fsi_soft_all_reset(void)
+{
+ u32 status = fsi_master_read(SOFT_RST);
+
+ /* port AB reset */
+ status &= 0x000000ff;
+ fsi_master_write(SOFT_RST, status);
+ mdelay(10);
+
+ /* soft reset */
+ status &= 0x000000f0;
+ fsi_master_write(SOFT_RST, status);
+ status |= 0x00000001;
+ fsi_master_write(SOFT_RST, status);
+ mdelay(10);
+}
+
+static void fsi_16data_push(struct fsi_priv *fsi,
+ struct snd_pcm_runtime *runtime,
+ int send)
+{
+ u16 *dma_start;
+ u32 snd;
+ int i;
+
+ /* get dma start position for FSI */
+ dma_start = (u16 *)runtime->dma_area;
+ dma_start += fsi->byte_offset / 2;
+
+ /*
+ * soft dma
+ * FSI can not use DMA when 16bpp
+ */
+ for (i = 0; i < send; i++) {
+ snd = (u32)dma_start[i];
+ fsi_reg_write(fsi, DODT, snd << 8);
+ }
+}
+
+static void fsi_32data_push(struct fsi_priv *fsi,
+ struct snd_pcm_runtime *runtime,
+ int send)
+{
+ u32 *dma_start;
+
+ /* get dma start position for FSI */
+ dma_start = (u32 *)runtime->dma_area;
+ dma_start += fsi->byte_offset / 4;
+
+ dma_wait_for_completion(fsi->dma_chan);
+ dma_configure_channel(fsi->dma_chan, (SM_INC|0x400|TS_32|TM_BUR));
+ dma_write(fsi->dma_chan, (u32)dma_start,
+ (u32)(fsi->base + DODT), send * 4);
+}
+
+/* playback interrupt */
+static int fsi_data_push(struct fsi_priv *fsi)
+{
+ struct snd_pcm_runtime *runtime;
+ struct snd_pcm_substream *substream = NULL;
+ int send;
+ int fifo_free;
+ int width;
+
+ if (!fsi ||
+ !fsi->substream ||
+ !fsi->substream->runtime)
+ return -EINVAL;
+
+ runtime = fsi->substream->runtime;
+
+ /* FSI FIFO has limit.
+ * So, this driver can not send periods data at a time
+ */
+ if (fsi->byte_offset >=
+ fsi->period_len * (fsi->periods + 1)) {
+
+ substream = fsi->substream;
+ fsi->periods = (fsi->periods + 1) % runtime->periods;
+
+ if (0 == fsi->periods)
+ fsi->byte_offset = 0;
+ }
+
+ /* get 1 channel data width */
+ width = frames_to_bytes(runtime, 1) / fsi->chan;
+
+ /* get send size for alsa */
+ send = (fsi->buffer_len - fsi->byte_offset) / width;
+
+ /* get FIFO free size */
+ fifo_free = (fsi->fifo_max * fsi->chan) - fsi_get_fifo_residue(fsi, 1);
+
+ /* size check */
+ if (fifo_free < send)
+ send = fifo_free;
+
+ if (2 == width)
+ fsi_16data_push(fsi, runtime, send);
+ else if (4 == width)
+ fsi_32data_push(fsi, runtime, send);
+ else
+ return -EINVAL;
+
+ fsi->byte_offset += send * width;
+
+ fsi_irq_enable(fsi, 1);
+
+ if (substream)
+ snd_pcm_period_elapsed(substream);
+
+ return 0;
+}
+
+static irqreturn_t fsi_interrupt(int irq, void *data)
+{
+ u32 status = fsi_master_read(SOFT_RST) & ~0x00000010;
+ u32 int_st = fsi_master_read(INT_ST);
+
+ /* clear irq status */
+ fsi_master_write(SOFT_RST, status);
+ fsi_master_write(SOFT_RST, status | 0x00000010);
+
+ if (int_st & INT_A_OUT)
+ fsi_data_push(&master->fsia);
+ if (int_st & INT_B_OUT)
+ fsi_data_push(&master->fsib);
+
+ fsi_master_write(INT_ST, 0x0000000);
+
+ return IRQ_HANDLED;
+}
+
+/************************************************************************
+
+
+ dai ops
+
+
+************************************************************************/
+static int fsi_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct fsi_priv *fsi = fsi_get(substream);
+ const char *msg;
+ u32 flags = fsi_get_info_flags(fsi);
+ u32 fmt;
+ u32 reg;
+ u32 data;
+ int is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ int is_master;
+ int ret = 0;
+
+ clk_enable(master->clk);
+
+ /* CKG1 */
+ data = is_play ? (1 << 0) : (1 << 4);
+ is_master = fsi_is_master_mode(fsi, is_play);
+ if (is_master)
+ fsi_reg_mask_set(fsi, CKG1, data, data);
+ else
+ fsi_reg_mask_set(fsi, CKG1, data, 0);
+
+ /* clock inversion (CKG2) */
+ data = 0;
+ switch (SH_FSI_INVERSION_MASK & flags) {
+ case SH_FSI_LRM_INV:
+ data = 1 << 12;
+ break;
+ case SH_FSI_BRM_INV:
+ data = 1 << 8;
+ break;
+ case SH_FSI_LRS_INV:
+ data = 1 << 4;
+ break;
+ case SH_FSI_BRS_INV:
+ data = 1 << 0;
+ break;
+ }
+ fsi_reg_write(fsi, CKG2, data);
+
+ /* do fmt, di fmt */
+ data = 0;
+ reg = is_play ? DO_FMT : DI_FMT;
+ fmt = is_play ? SH_FSI_GET_OFMT(flags) : SH_FSI_GET_IFMT(flags);
+ switch (fmt) {
+ case SH_FSI_FMT_MONO:
+ msg = "MONO";
+ data = CR_FMT(CR_MONO);
+ fsi->chan = 1;
+ break;
+ case SH_FSI_FMT_MONO_DELAY:
+ msg = "MONO Delay";
+ data = CR_FMT(CR_MONO_D);
+ fsi->chan = 1;
+ break;
+ case SH_FSI_FMT_PCM:
+ msg = "PCM";
+ data = CR_FMT(CR_PCM);
+ fsi->chan = 2;
+ break;
+ case SH_FSI_FMT_I2S:
+ msg = "I2S";
+ data = CR_FMT(CR_I2S);
+ fsi->chan = 2;
+ break;
+ case SH_FSI_FMT_TDM:
+ msg = "TDM";
+ data = CR_FMT(CR_TDM) | (fsi->chan - 1);
+ fsi->chan = is_play ?
+ SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ break;
+ case SH_FSI_FMT_TDM_DELAY:
+ msg = "TDM Delay";
+ data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
+ fsi->chan = is_play ?
+ SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
+ break;
+ default:
+ dev_err(dai->dev, "unknown format.\n");
+ return -EINVAL;
+ }
+
+ switch (fsi->chan) {
+ case 1:
+ fsi->fifo_max = 256;
+ break;
+ case 2:
+ fsi->fifo_max = 128;
+ break;
+ case 3:
+ case 4:
+ fsi->fifo_max = 64;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ case 8:
+ fsi->fifo_max = 32;
+ break;
+ default:
+ dev_err(dai->dev, "channel size error.\n");
+ return -EINVAL;
+ }
+
+ fsi_reg_write(fsi, reg, data);
+ dev_dbg(dai->dev, "use %s format (%d channel) use %d DMAC\n",
+ msg, fsi->chan, fsi->dma_chan);
+
+ /*
+ * clear clk reset if master mode
+ */
+ if (is_master)
+ fsi_clk_ctrl(fsi, 1);
+
+ /* irq setting */
+ fsi_irq_init(fsi, is_play);
+
+ return ret;
+}
+
+static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct fsi_priv *fsi = fsi_get(substream);
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+
+ fsi_irq_disable(fsi, is_play);
+ fsi_clk_ctrl(fsi, 0);
+
+ clk_disable(master->clk);
+}
+
+static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct fsi_priv *fsi = fsi_get(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ int ret = 0;
+
+ /* capture not supported */
+ if (!is_play)
+ return -ENODEV;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ fsi_stream_push(fsi, substream,
+ frames_to_bytes(runtime, runtime->buffer_size),
+ frames_to_bytes(runtime, runtime->period_size));
+ ret = fsi_data_push(fsi);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ fsi_irq_disable(fsi, is_play);
+ fsi_stream_pop(fsi);
+ break;
+ }
+
+ return ret;
+}
+
+static struct snd_soc_dai_ops fsi_dai_ops = {
+ .startup = fsi_dai_startup,
+ .shutdown = fsi_dai_shutdown,
+ .trigger = fsi_dai_trigger,
+};
+
+/************************************************************************
+
+
+ pcm ops
+
+
+************************************************************************/
+static struct snd_pcm_hardware fsi_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE,
+ .formats = FSI_FMTS,
+ .rates = FSI_RATES,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ .channels_min = 1,
+ .channels_max = 2,
+ .buffer_bytes_max = 64 * 1024,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 32,
+ .fifo_size = 256,
+};
+
+static int fsi_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &fsi_pcm_hardware);
+
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+
+ return ret;
+}
+
+static int fsi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ return snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+}
+
+static int fsi_hw_free(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_lib_free_pages(substream);
+}
+
+static snd_pcm_uframes_t fsi_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct fsi_priv *fsi = fsi_get(substream);
+ int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ long location;
+
+ location = (fsi->byte_offset - 1) - fsi_get_residue(fsi, is_play);
+ if (location < 0)
+ location = 0;
+
+ return bytes_to_frames(runtime, location);
+}
+
+static struct snd_pcm_ops fsi_pcm_ops = {
+ .open = fsi_pcm_open,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = fsi_hw_params,
+ .hw_free = fsi_hw_free,
+ .pointer = fsi_pointer,
+};
+
+/************************************************************************
+
+
+ snd_soc_platform
+
+
+************************************************************************/
+#define PREALLOC_BUFFER (32 * 1024)
+#define PREALLOC_BUFFER_MAX (32 * 1024)
+
+static void fsi_pcm_free(struct snd_pcm *pcm)
+{
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static int fsi_pcm_new(struct snd_card *card,
+ struct snd_soc_dai *dai,
+ struct snd_pcm *pcm)
+{
+ /*
+ * dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
+ * in MMAP mode (i.e. aplay -M)
+ */
+ return snd_pcm_lib_preallocate_pages_for_all(
+ pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ PREALLOC_BUFFER, PREALLOC_BUFFER_MAX);
+}
+
+/************************************************************************
+
+
+ alsa struct
+
+
+************************************************************************/
+struct snd_soc_dai fsi_soc_dai[] = {
+ {
+ .name = "FSIA",
+ .id = 0,
+ .playback = {
+ .rates = FSI_RATES,
+ .formats = FSI_FMTS,
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ /* capture not supported */
+ .ops = &fsi_dai_ops,
+ },
+ {
+ .name = "FSIB",
+ .id = 1,
+ .playback = {
+ .rates = FSI_RATES,
+ .formats = FSI_FMTS,
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ /* capture not supported */
+ .ops = &fsi_dai_ops,
+ },
+};
+EXPORT_SYMBOL_GPL(fsi_soc_dai);
+
+struct snd_soc_platform fsi_soc_platform = {
+ .name = "fsi-pcm",
+ .pcm_ops = &fsi_pcm_ops,
+ .pcm_new = fsi_pcm_new,
+ .pcm_free = fsi_pcm_free,
+};
+EXPORT_SYMBOL_GPL(fsi_soc_platform);
+
+/************************************************************************
+
+
+ platform function
+
+
+************************************************************************/
+static int fsi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ char clk_name[8];
+ unsigned int irq;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || !irq) {
+ dev_err(&pdev->dev, "Not enough FSI platform resources.\n");
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+ if (!master) {
+ dev_err(&pdev->dev, "Could not allocate master\n");
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ master->base = ioremap_nocache(res->start, resource_size(res));
+ if (!master->base) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "Unable to ioremap FSI registers.\n");
+ goto exit_kfree;
+ }
+
+ master->irq = irq;
+ master->info = pdev->dev.platform_data;
+ master->fsia.base = master->base;
+ master->fsib.base = master->base + 0x40;
+
+ master->fsia.dma_chan = -1;
+ master->fsib.dma_chan = -1;
+
+ ret = fsi_get_dma_chan();
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot get dma api\n");
+ goto exit_iounmap;
+ }
+
+ /* FSI is based on SPU mstp */
+ snprintf(clk_name, sizeof(clk_name), "spu%d", pdev->id);
+ master->clk = clk_get(NULL, clk_name);
+ if (IS_ERR(master->clk)) {
+ dev_err(&pdev->dev, "cannot get %s mstp\n", clk_name);
+ ret = -EIO;
+ goto exit_free_dma;
+ }
+
+ fsi_soc_dai[0].dev = &pdev->dev;
+ fsi_soc_dai[1].dev = &pdev->dev;
+
+ fsi_soft_all_reset();
+
+ ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED, "fsi", master);
+ if (ret) {
+ dev_err(&pdev->dev, "irq request err\n");
+ goto exit_free_dma;
+ }
+
+ ret = snd_soc_register_platform(&fsi_soc_platform);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot snd soc register\n");
+ goto exit_free_irq;
+ }
+
+ return snd_soc_register_dais(fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
+
+exit_free_irq:
+ free_irq(irq, master);
+exit_free_dma:
+ fsi_free_dma_chan();
+exit_iounmap:
+ iounmap(master->base);
+exit_kfree:
+ kfree(master);
+ master = NULL;
+exit:
+ return ret;
+}
+
+static int fsi_remove(struct platform_device *pdev)
+{
+ snd_soc_unregister_dais(fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
+ snd_soc_unregister_platform(&fsi_soc_platform);
+
+ clk_put(master->clk);
+
+ fsi_free_dma_chan();
+
+ free_irq(master->irq, master);
+
+ iounmap(master->base);
+ kfree(master);
+ master = NULL;
+ return 0;
+}
+
+static struct platform_driver fsi_driver = {
+ .driver = {
+ .name = "sh_fsi",
+ },
+ .probe = fsi_probe,
+ .remove = fsi_remove,
+};
+
+static int __init fsi_mobile_init(void)
+{
+ return platform_driver_register(&fsi_driver);
+}
+
+static void __exit fsi_mobile_exit(void)
+{
+ platform_driver_unregister(&fsi_driver);
+}
+module_init(fsi_mobile_init);
+module_exit(fsi_mobile_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SuperH onchip FSI audio driver");
+MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
new file mode 100644
index 0000000..c8ceddc
--- /dev/null
+++ b/sound/soc/soc-cache.c
@@ -0,0 +1,218 @@
+/*
+ * soc-cache.c -- ASoC register cache helpers
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <sound/soc.h>
+
+static unsigned int snd_soc_7_9_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg >= codec->reg_cache_size)
+ return -1;
+ return cache[reg];
+}
+
+static int snd_soc_7_9_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ u8 data[2];
+ int ret;
+
+ BUG_ON(codec->volatile_register);
+
+ data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+ data[1] = value & 0x00ff;
+
+ if (reg < codec->reg_cache_size)
+ cache[reg] = value;
+ ret = codec->hw_write(codec->control_data, data, 2);
+ if (ret == 2)
+ return 0;
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int snd_soc_7_9_spi_write(void *control_data, const char *data,
+ int len)
+{
+ struct spi_device *spi = control_data;
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#else
+#define snd_soc_7_9_spi_write NULL
+#endif
+
+static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ u8 data[3];
+
+ data[0] = reg;
+ data[1] = (value >> 8) & 0xff;
+ data[2] = value & 0xff;
+
+ if (!snd_soc_codec_volatile_register(codec, reg))
+ reg_cache[reg] = value;
+
+ if (codec->hw_write(codec->control_data, data, 3) == 3)
+ return 0;
+ else
+ return -EIO;
+}
+
+static unsigned int snd_soc_8_16_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size ||
+ snd_soc_codec_volatile_register(codec, reg))
+ return codec->hw_read(codec, reg);
+ else
+ return cache[reg];
+}
+
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
+static unsigned int snd_soc_8_16_read_i2c(struct snd_soc_codec *codec,
+ unsigned int r)
+{
+ struct i2c_msg xfer[2];
+ u8 reg = r;
+ u16 data;
+ int ret;
+ struct i2c_client *client = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+#else
+#define snd_soc_8_16_read_i2c NULL
+#endif
+
+static struct {
+ int addr_bits;
+ int data_bits;
+ int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
+ int (*spi_write)(void *, const char *, int);
+ unsigned int (*read)(struct snd_soc_codec *, unsigned int);
+ unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
+} io_types[] = {
+ { 7, 9, snd_soc_7_9_write, snd_soc_7_9_spi_write, snd_soc_7_9_read },
+ { 8, 16, snd_soc_8_16_write, NULL, snd_soc_8_16_read,
+ snd_soc_8_16_read_i2c },
+};
+
+/**
+ * snd_soc_codec_set_cache_io: Set up standard I/O functions.
+ *
+ * @codec: CODEC to configure.
+ * @type: Type of cache.
+ * @addr_bits: Number of bits of register address data.
+ * @data_bits: Number of bits of data per register.
+ * @control: Control bus used.
+ *
+ * Register formats are frequently shared between many I2C and SPI
+ * devices. In order to promote code reuse the ASoC core provides
+ * some standard implementations of CODEC read and write operations
+ * which can be set up using this function.
+ *
+ * The caller is responsible for allocating and initialising the
+ * actual cache.
+ *
+ * Note that at present this code cannot be used by CODECs with
+ * volatile registers.
+ */
+int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+ int addr_bits, int data_bits,
+ enum snd_soc_control_type control)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(io_types); i++)
+ if (io_types[i].addr_bits == addr_bits &&
+ io_types[i].data_bits == data_bits)
+ break;
+ if (i == ARRAY_SIZE(io_types)) {
+ printk(KERN_ERR
+ "No I/O functions for %d bit address %d bit data\n",
+ addr_bits, data_bits);
+ return -EINVAL;
+ }
+
+ codec->write = io_types[i].write;
+ codec->read = io_types[i].read;
+
+ switch (control) {
+ case SND_SOC_CUSTOM:
+ break;
+
+ case SND_SOC_I2C:
+#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
+ codec->hw_write = (hw_write_t)i2c_master_send;
+#endif
+ if (io_types[i].i2c_read)
+ codec->hw_read = io_types[i].i2c_read;
+ break;
+
+ case SND_SOC_SPI:
+ if (io_types[i].spi_write)
+ codec->hw_write = io_types[i].spi_write;
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 1d70829..7ff04ad 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -28,6 +28,7 @@
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
+#include <sound/ac97_codec.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -619,8 +620,9 @@
#ifdef CONFIG_PM
/* powers down audio subsystem for suspend */
-static int soc_suspend(struct platform_device *pdev, pm_message_t state)
+static int soc_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
struct snd_soc_platform *platform = card->platform;
@@ -656,7 +658,7 @@
snd_pcm_suspend_all(card->dai_link[i].pcm);
if (card->suspend_pre)
- card->suspend_pre(pdev, state);
+ card->suspend_pre(pdev, PMSG_SUSPEND);
for (i = 0; i < card->num_links; i++) {
struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
@@ -682,7 +684,7 @@
}
if (codec_dev->suspend)
- codec_dev->suspend(pdev, state);
+ codec_dev->suspend(pdev, PMSG_SUSPEND);
for (i = 0; i < card->num_links; i++) {
struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
@@ -691,7 +693,7 @@
}
if (card->suspend_post)
- card->suspend_post(pdev, state);
+ card->suspend_post(pdev, PMSG_SUSPEND);
return 0;
}
@@ -765,8 +767,9 @@
}
/* powers up audio subsystem after a suspend */
-static int soc_resume(struct platform_device *pdev)
+static int soc_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
struct snd_soc_dai *cpu_dai = card->dai_link[0].cpu_dai;
@@ -788,6 +791,44 @@
return 0;
}
+/**
+ * snd_soc_suspend_device: Notify core of device suspend
+ *
+ * @dev: Device being suspended.
+ *
+ * In order to ensure that the entire audio subsystem is suspended in a
+ * coordinated fashion ASoC devices should suspend themselves when
+ * called by ASoC. When the standard kernel suspend process asks the
+ * device to suspend it should call this function to initiate a suspend
+ * of the entire ASoC card.
+ *
+ * \note Currently this function is stubbed out.
+ */
+int snd_soc_suspend_device(struct device *dev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_suspend_device);
+
+/**
+ * snd_soc_resume_device: Notify core of device resume
+ *
+ * @dev: Device being resumed.
+ *
+ * In order to ensure that the entire audio subsystem is resumed in a
+ * coordinated fashion ASoC devices should resume themselves when called
+ * by ASoC. When the standard kernel resume process asks the device
+ * to resume it should call this function. Once all the components of
+ * the card have notified that they are ready to be resumed the card
+ * will be resumed.
+ *
+ * \note Currently this function is stubbed out.
+ */
+int snd_soc_resume_device(struct device *dev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_resume_device);
#else
#define soc_suspend NULL
#define soc_resume NULL
@@ -981,16 +1022,39 @@
return 0;
}
+static int soc_poweroff(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = socdev->card;
+
+ if (!card->instantiated)
+ return 0;
+
+ /* Flush out pmdown_time work - we actually do want to run it
+ * now, we're shutting down so no imminent restart. */
+ run_delayed_work(&card->delayed_work);
+
+ snd_soc_dapm_shutdown(socdev);
+
+ return 0;
+}
+
+static struct dev_pm_ops soc_pm_ops = {
+ .suspend = soc_suspend,
+ .resume = soc_resume,
+ .poweroff = soc_poweroff,
+};
+
/* ASoC platform driver */
static struct platform_driver soc_driver = {
.driver = {
.name = "soc-audio",
.owner = THIS_MODULE,
+ .pm = &soc_pm_ops,
},
.probe = soc_probe,
.remove = soc_remove,
- .suspend = soc_suspend,
- .resume = soc_resume,
};
/* create a new pcm */
@@ -1062,6 +1126,23 @@
return ret;
}
+/**
+ * snd_soc_codec_volatile_register: Report if a register is volatile.
+ *
+ * @codec: CODEC to query.
+ * @reg: Register to query.
+ *
+ * Boolean function indiciating if a CODEC register is volatile.
+ */
+int snd_soc_codec_volatile_register(struct snd_soc_codec *codec, int reg)
+{
+ if (codec->volatile_register)
+ return codec->volatile_register(reg);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_codec_volatile_register);
+
/* codec register dump */
static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
{
@@ -1075,6 +1156,9 @@
count += sprintf(buf, "%s registers\n", codec->name);
for (i = 0; i < codec->reg_cache_size; i += step) {
+ if (codec->readable_register && !codec->readable_register(i))
+ continue;
+
count += sprintf(buf + count, "%2x: ", i);
if (count >= PAGE_SIZE - 1)
break;
@@ -1183,10 +1267,18 @@
if (!codec->debugfs_pop_time)
printk(KERN_WARNING
"Failed to create pop time debugfs file\n");
+
+ codec->debugfs_dapm = debugfs_create_dir("dapm", debugfs_root);
+ if (!codec->debugfs_dapm)
+ printk(KERN_WARNING
+ "Failed to create DAPM debugfs directory\n");
+
+ snd_soc_dapm_debugfs_init(codec);
}
static void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
{
+ debugfs_remove_recursive(codec->debugfs_dapm);
debugfs_remove(codec->debugfs_pop_time);
debugfs_remove(codec->debugfs_reg);
}
@@ -1264,10 +1356,10 @@
* Returns 1 for change else 0.
*/
int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value)
+ unsigned int mask, unsigned int value)
{
int change;
- unsigned short old, new;
+ unsigned int old, new;
mutex_lock(&io_mutex);
old = snd_soc_read(codec, reg);
@@ -1294,10 +1386,10 @@
* Returns 1 for change else 0.
*/
int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg,
- unsigned short mask, unsigned short value)
+ unsigned int mask, unsigned int value)
{
int change;
- unsigned short old, new;
+ unsigned int old, new;
mutex_lock(&io_mutex);
old = snd_soc_read(codec, reg);
@@ -1381,8 +1473,11 @@
continue;
}
}
- if (card->dai_link[i].codec_dai->ac97_control)
+ if (card->dai_link[i].codec_dai->ac97_control) {
ac97 = 1;
+ snd_ac97_dev_add_pdata(codec->ac97,
+ card->dai_link[i].cpu_dai->ac97_pdata);
+ }
}
snprintf(codec->card->shortname, sizeof(codec->card->shortname),
"%s", card->name);
@@ -1586,7 +1681,7 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, bitmask;
+ unsigned int val, bitmask;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
;
@@ -1615,8 +1710,8 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val;
- unsigned short mask, bitmask;
+ unsigned int val;
+ unsigned int mask, bitmask;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
;
@@ -1652,7 +1747,7 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short reg_val, val, mux;
+ unsigned int reg_val, val, mux;
reg_val = snd_soc_read(codec, e->reg);
val = (reg_val >> e->shift_l) & e->mask;
@@ -1691,8 +1786,8 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val;
- unsigned short mask;
+ unsigned int val;
+ unsigned int mask;
if (ucontrol->value.enumerated.item[0] > e->max - 1)
return -EINVAL;
@@ -1852,7 +1947,7 @@
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
- unsigned short val, val2, val_mask;
+ unsigned int val, val2, val_mask;
val = (ucontrol->value.integer.value[0] & mask);
if (invert)
@@ -1918,7 +2013,7 @@
unsigned int reg2 = mc->rreg;
unsigned int shift = mc->shift;
int max = mc->max;
- unsigned int mask = (1<<fls(max))-1;
+ unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
ucontrol->value.integer.value[0] =
@@ -1958,7 +2053,7 @@
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
int err;
- unsigned short val, val2, val_mask;
+ unsigned int val, val2, val_mask;
val_mask = mask << shift;
val = (ucontrol->value.integer.value[0] & mask);
@@ -2050,7 +2145,7 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
int min = mc->min;
- unsigned short val;
+ unsigned int val;
val = (ucontrol->value.integer.value[0]+min) & 0xff;
val |= ((ucontrol->value.integer.value[1]+min) & 0xff) << 8;
@@ -2136,17 +2231,20 @@
/**
* snd_soc_dai_set_tdm_slot - configure DAI TDM.
* @dai: DAI
- * @mask: DAI specific mask representing used slots.
+ * @tx_mask: bitmask representing active TX slots.
+ * @rx_mask: bitmask representing active RX slots.
* @slots: Number of slots in use.
+ * @slot_width: Width in bits for each slot.
*
* Configures a DAI for TDM operation. Both mask and slots are codec and DAI
* specific.
*/
int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots)
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
if (dai->ops && dai->ops->set_tdm_slot)
- return dai->ops->set_tdm_slot(dai, mask, slots);
+ return dai->ops->set_tdm_slot(dai, tx_mask, rx_mask,
+ slots, slot_width);
else
return -EINVAL;
}
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 21c6907..0d8b08e 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -37,6 +37,7 @@
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/jiffies.h>
+#include <linux/debugfs.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -52,19 +53,41 @@
/* dapm power sequences - make this per codec in the future */
static int dapm_up_seq[] = {
- snd_soc_dapm_pre, snd_soc_dapm_supply, snd_soc_dapm_micbias,
- snd_soc_dapm_mic, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
- snd_soc_dapm_dac, snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl,
- snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
- snd_soc_dapm_post
+ [snd_soc_dapm_pre] = 0,
+ [snd_soc_dapm_supply] = 1,
+ [snd_soc_dapm_micbias] = 2,
+ [snd_soc_dapm_aif_in] = 3,
+ [snd_soc_dapm_aif_out] = 3,
+ [snd_soc_dapm_mic] = 4,
+ [snd_soc_dapm_mux] = 5,
+ [snd_soc_dapm_value_mux] = 5,
+ [snd_soc_dapm_dac] = 6,
+ [snd_soc_dapm_mixer] = 7,
+ [snd_soc_dapm_mixer_named_ctl] = 7,
+ [snd_soc_dapm_pga] = 8,
+ [snd_soc_dapm_adc] = 9,
+ [snd_soc_dapm_hp] = 10,
+ [snd_soc_dapm_spk] = 10,
+ [snd_soc_dapm_post] = 11,
};
static int dapm_down_seq[] = {
- snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
- snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
- snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
- snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
- snd_soc_dapm_post
+ [snd_soc_dapm_pre] = 0,
+ [snd_soc_dapm_adc] = 1,
+ [snd_soc_dapm_hp] = 2,
+ [snd_soc_dapm_spk] = 2,
+ [snd_soc_dapm_pga] = 4,
+ [snd_soc_dapm_mixer_named_ctl] = 5,
+ [snd_soc_dapm_mixer] = 5,
+ [snd_soc_dapm_dac] = 6,
+ [snd_soc_dapm_mic] = 7,
+ [snd_soc_dapm_micbias] = 8,
+ [snd_soc_dapm_mux] = 9,
+ [snd_soc_dapm_value_mux] = 9,
+ [snd_soc_dapm_aif_in] = 10,
+ [snd_soc_dapm_aif_out] = 10,
+ [snd_soc_dapm_supply] = 11,
+ [snd_soc_dapm_post] = 12,
};
static void pop_wait(u32 pop_time)
@@ -130,8 +153,12 @@
if (card->set_bias_level)
ret = card->set_bias_level(card, level);
- if (ret == 0 && codec->set_bias_level)
- ret = codec->set_bias_level(codec, level);
+ if (ret == 0) {
+ if (codec->set_bias_level)
+ ret = codec->set_bias_level(codec, level);
+ else
+ codec->bias_level = level;
+ }
return ret;
}
@@ -206,6 +233,8 @@
case snd_soc_dapm_micbias:
case snd_soc_dapm_vmid:
case snd_soc_dapm_supply:
+ case snd_soc_dapm_aif_in:
+ case snd_soc_dapm_aif_out:
p->connect = 1;
break;
/* does effect routing - dynamically connected */
@@ -268,7 +297,7 @@
static int dapm_update_bits(struct snd_soc_dapm_widget *widget)
{
int change, power;
- unsigned short old, new;
+ unsigned int old, new;
struct snd_soc_codec *codec = widget->codec;
/* check for valid widgets */
@@ -479,8 +508,14 @@
if (widget->id == snd_soc_dapm_supply)
return 0;
- if (widget->id == snd_soc_dapm_adc && widget->active)
- return 1;
+ switch (widget->id) {
+ case snd_soc_dapm_adc:
+ case snd_soc_dapm_aif_out:
+ if (widget->active)
+ return 1;
+ default:
+ break;
+ }
if (widget->connected) {
/* connected pin ? */
@@ -519,8 +554,14 @@
return 0;
/* active stream ? */
- if (widget->id == snd_soc_dapm_dac && widget->active)
- return 1;
+ switch (widget->id) {
+ case snd_soc_dapm_dac:
+ case snd_soc_dapm_aif_in:
+ if (widget->active)
+ return 1;
+ default:
+ break;
+ }
if (widget->connected) {
/* connected pin ? */
@@ -689,55 +730,213 @@
return power;
}
-/*
- * Scan a single DAPM widget for a complete audio path and update the
- * power status appropriately.
- */
-static int dapm_power_widget(struct snd_soc_codec *codec, int event,
- struct snd_soc_dapm_widget *w)
+static int dapm_seq_compare(struct snd_soc_dapm_widget *a,
+ struct snd_soc_dapm_widget *b,
+ int sort[])
{
- int ret;
+ if (sort[a->id] != sort[b->id])
+ return sort[a->id] - sort[b->id];
+ if (a->reg != b->reg)
+ return a->reg - b->reg;
- switch (w->id) {
- case snd_soc_dapm_pre:
- if (!w->event)
- return 0;
+ return 0;
+}
- if (event == SND_SOC_DAPM_STREAM_START) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_PRE_PMU);
- if (ret < 0)
- return ret;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_PRE_PMD);
- if (ret < 0)
- return ret;
+/* Insert a widget in order into a DAPM power sequence. */
+static void dapm_seq_insert(struct snd_soc_dapm_widget *new_widget,
+ struct list_head *list,
+ int sort[])
+{
+ struct snd_soc_dapm_widget *w;
+
+ list_for_each_entry(w, list, power_list)
+ if (dapm_seq_compare(new_widget, w, sort) < 0) {
+ list_add_tail(&new_widget->power_list, &w->power_list);
+ return;
}
- return 0;
- case snd_soc_dapm_post:
- if (!w->event)
- return 0;
+ list_add_tail(&new_widget->power_list, list);
+}
- if (event == SND_SOC_DAPM_STREAM_START) {
+/* Apply the coalesced changes from a DAPM sequence */
+static void dapm_seq_run_coalesced(struct snd_soc_codec *codec,
+ struct list_head *pending)
+{
+ struct snd_soc_dapm_widget *w;
+ int reg, power, ret;
+ unsigned int value = 0;
+ unsigned int mask = 0;
+ unsigned int cur_mask;
+
+ reg = list_first_entry(pending, struct snd_soc_dapm_widget,
+ power_list)->reg;
+
+ list_for_each_entry(w, pending, power_list) {
+ cur_mask = 1 << w->shift;
+ BUG_ON(reg != w->reg);
+
+ if (w->invert)
+ power = !w->power;
+ else
+ power = w->power;
+
+ mask |= cur_mask;
+ if (power)
+ value |= cur_mask;
+
+ pop_dbg(codec->pop_time,
+ "pop test : Queue %s: reg=0x%x, 0x%x/0x%x\n",
+ w->name, reg, value, mask);
+
+ /* power up pre event */
+ if (w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
+ pop_dbg(codec->pop_time, "pop test : %s PRE_PMU\n",
+ w->name);
+ ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
+ if (ret < 0)
+ pr_err("%s: pre event failed: %d\n",
+ w->name, ret);
+ }
+
+ /* power down pre event */
+ if (!w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
+ pop_dbg(codec->pop_time, "pop test : %s PRE_PMD\n",
+ w->name);
+ ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
+ if (ret < 0)
+ pr_err("%s: pre event failed: %d\n",
+ w->name, ret);
+ }
+
+ /* Lower PGA volume to reduce pops */
+ if (w->id == snd_soc_dapm_pga && !w->power)
+ dapm_set_pga(w, w->power);
+ }
+
+ if (reg >= 0) {
+ pop_dbg(codec->pop_time,
+ "pop test : Applying 0x%x/0x%x to %x in %dms\n",
+ value, mask, reg, codec->pop_time);
+ pop_wait(codec->pop_time);
+ snd_soc_update_bits(codec, reg, mask, value);
+ }
+
+ list_for_each_entry(w, pending, power_list) {
+ /* Raise PGA volume to reduce pops */
+ if (w->id == snd_soc_dapm_pga && w->power)
+ dapm_set_pga(w, w->power);
+
+ /* power up post event */
+ if (w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
+ pop_dbg(codec->pop_time, "pop test : %s POST_PMU\n",
+ w->name);
ret = w->event(w,
NULL, SND_SOC_DAPM_POST_PMU);
if (ret < 0)
- return ret;
- } else if (event == SND_SOC_DAPM_STREAM_STOP) {
- ret = w->event(w,
- NULL, SND_SOC_DAPM_POST_PMD);
- if (ret < 0)
- return ret;
+ pr_err("%s: post event failed: %d\n",
+ w->name, ret);
}
- return 0;
- default:
- return dapm_generic_apply_power(w);
+ /* power down post event */
+ if (!w->power && w->event &&
+ (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
+ pop_dbg(codec->pop_time, "pop test : %s POST_PMD\n",
+ w->name);
+ ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
+ if (ret < 0)
+ pr_err("%s: post event failed: %d\n",
+ w->name, ret);
+ }
}
}
+/* Apply a DAPM power sequence.
+ *
+ * We walk over a pre-sorted list of widgets to apply power to. In
+ * order to minimise the number of writes to the device required
+ * multiple widgets will be updated in a single write where possible.
+ * Currently anything that requires more than a single write is not
+ * handled.
+ */
+static void dapm_seq_run(struct snd_soc_codec *codec, struct list_head *list,
+ int event, int sort[])
+{
+ struct snd_soc_dapm_widget *w, *n;
+ LIST_HEAD(pending);
+ int cur_sort = -1;
+ int cur_reg = SND_SOC_NOPM;
+ int ret;
+
+ list_for_each_entry_safe(w, n, list, power_list) {
+ ret = 0;
+
+ /* Do we need to apply any queued changes? */
+ if (sort[w->id] != cur_sort || w->reg != cur_reg) {
+ if (!list_empty(&pending))
+ dapm_seq_run_coalesced(codec, &pending);
+
+ INIT_LIST_HEAD(&pending);
+ cur_sort = -1;
+ cur_reg = SND_SOC_NOPM;
+ }
+
+ switch (w->id) {
+ case snd_soc_dapm_pre:
+ if (!w->event)
+ list_for_each_entry_safe_continue(w, n, list,
+ power_list);
+
+ if (event == SND_SOC_DAPM_STREAM_START)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_PRE_PMU);
+ else if (event == SND_SOC_DAPM_STREAM_STOP)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_PRE_PMD);
+ break;
+
+ case snd_soc_dapm_post:
+ if (!w->event)
+ list_for_each_entry_safe_continue(w, n, list,
+ power_list);
+
+ if (event == SND_SOC_DAPM_STREAM_START)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_POST_PMU);
+ else if (event == SND_SOC_DAPM_STREAM_STOP)
+ ret = w->event(w,
+ NULL, SND_SOC_DAPM_POST_PMD);
+ break;
+
+ case snd_soc_dapm_input:
+ case snd_soc_dapm_output:
+ case snd_soc_dapm_hp:
+ case snd_soc_dapm_mic:
+ case snd_soc_dapm_line:
+ case snd_soc_dapm_spk:
+ /* No register support currently */
+ ret = dapm_generic_apply_power(w);
+ break;
+
+ default:
+ /* Queue it up for application */
+ cur_sort = sort[w->id];
+ cur_reg = w->reg;
+ list_move(&w->power_list, &pending);
+ break;
+ }
+
+ if (ret < 0)
+ pr_err("Failed to apply widget power: %d\n",
+ ret);
+ }
+
+ if (!list_empty(&pending))
+ dapm_seq_run_coalesced(codec, &pending);
+}
+
/*
* Scan each dapm widget for complete audio path.
* A complete path is a route that has valid endpoints i.e.:-
@@ -751,23 +950,22 @@
{
struct snd_soc_device *socdev = codec->socdev;
struct snd_soc_dapm_widget *w;
+ LIST_HEAD(up_list);
+ LIST_HEAD(down_list);
int ret = 0;
- int i, power;
+ int power;
int sys_power = 0;
- INIT_LIST_HEAD(&codec->up_list);
- INIT_LIST_HEAD(&codec->down_list);
-
/* Check which widgets we need to power and store them in
* lists indicating if they should be powered up or down.
*/
list_for_each_entry(w, &codec->dapm_widgets, list) {
switch (w->id) {
case snd_soc_dapm_pre:
- list_add_tail(&codec->down_list, &w->power_list);
+ dapm_seq_insert(w, &down_list, dapm_down_seq);
break;
case snd_soc_dapm_post:
- list_add_tail(&codec->up_list, &w->power_list);
+ dapm_seq_insert(w, &up_list, dapm_up_seq);
break;
default:
@@ -782,16 +980,31 @@
continue;
if (power)
- list_add_tail(&w->power_list, &codec->up_list);
+ dapm_seq_insert(w, &up_list, dapm_up_seq);
else
- list_add_tail(&w->power_list,
- &codec->down_list);
+ dapm_seq_insert(w, &down_list, dapm_down_seq);
w->power = power;
break;
}
}
+ /* If there are no DAPM widgets then try to figure out power from the
+ * event type.
+ */
+ if (list_empty(&codec->dapm_widgets)) {
+ switch (event) {
+ case SND_SOC_DAPM_STREAM_START:
+ case SND_SOC_DAPM_STREAM_RESUME:
+ sys_power = 1;
+ break;
+ case SND_SOC_DAPM_STREAM_NOP:
+ sys_power = codec->bias_level != SND_SOC_BIAS_STANDBY;
+ default:
+ break;
+ }
+ }
+
/* If we're changing to all on or all off then prepare */
if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
(!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
@@ -802,32 +1015,10 @@
}
/* Power down widgets first; try to avoid amplifying pops. */
- for (i = 0; i < ARRAY_SIZE(dapm_down_seq); i++) {
- list_for_each_entry(w, &codec->down_list, power_list) {
- /* is widget in stream order */
- if (w->id != dapm_down_seq[i])
- continue;
-
- ret = dapm_power_widget(codec, event, w);
- if (ret != 0)
- pr_err("Failed to power down %s: %d\n",
- w->name, ret);
- }
- }
+ dapm_seq_run(codec, &down_list, event, dapm_down_seq);
/* Now power up. */
- for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++) {
- list_for_each_entry(w, &codec->up_list, power_list) {
- /* is widget in stream order */
- if (w->id != dapm_up_seq[i])
- continue;
-
- ret = dapm_power_widget(codec, event, w);
- if (ret != 0)
- pr_err("Failed to power up %s: %d\n",
- w->name, ret);
- }
- }
+ dapm_seq_run(codec, &up_list, event, dapm_up_seq);
/* If we just powered the last thing off drop to standby bias */
if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
@@ -845,6 +1036,9 @@
pr_err("Failed to apply active bias: %d\n", ret);
}
+ pop_dbg(codec->pop_time, "DAPM sequencing finished, waiting %dms\n",
+ codec->pop_time);
+
return 0;
}
@@ -881,6 +1075,8 @@
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
case snd_soc_dapm_supply:
+ case snd_soc_dapm_aif_in:
+ case snd_soc_dapm_aif_out:
if (w->name) {
in = is_connected_input_ep(w);
dapm_clear_walk(w->codec);
@@ -906,6 +1102,92 @@
}
#endif
+#ifdef CONFIG_DEBUG_FS
+static int dapm_widget_power_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t dapm_widget_power_read_file(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct snd_soc_dapm_widget *w = file->private_data;
+ char *buf;
+ int in, out;
+ ssize_t ret;
+ struct snd_soc_dapm_path *p = NULL;
+
+ buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ in = is_connected_input_ep(w);
+ dapm_clear_walk(w->codec);
+ out = is_connected_output_ep(w);
+ dapm_clear_walk(w->codec);
+
+ ret = snprintf(buf, PAGE_SIZE, "%s: %s in %d out %d\n",
+ w->name, w->power ? "On" : "Off", in, out);
+
+ if (w->active && w->sname)
+ ret += snprintf(buf, PAGE_SIZE - ret, " stream %s active\n",
+ w->sname);
+
+ list_for_each_entry(p, &w->sources, list_sink) {
+ if (p->connect)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ " in %s %s\n",
+ p->name ? p->name : "static",
+ p->source->name);
+ }
+ list_for_each_entry(p, &w->sinks, list_source) {
+ if (p->connect)
+ ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ " out %s %s\n",
+ p->name ? p->name : "static",
+ p->sink->name);
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations dapm_widget_power_fops = {
+ .open = dapm_widget_power_open_file,
+ .read = dapm_widget_power_read_file,
+};
+
+void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec)
+{
+ struct snd_soc_dapm_widget *w;
+ struct dentry *d;
+
+ if (!codec->debugfs_dapm)
+ return;
+
+ list_for_each_entry(w, &codec->dapm_widgets, list) {
+ if (!w->name)
+ continue;
+
+ d = debugfs_create_file(w->name, 0444,
+ codec->debugfs_dapm, w,
+ &dapm_widget_power_fops);
+ if (!d)
+ printk(KERN_WARNING
+ "ASoC: Failed to create %s debugfs file\n",
+ w->name);
+ }
+}
+#else
+void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec)
+{
+}
+#endif
+
/* test and update the power status of a mux widget */
static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
struct snd_kcontrol *kcontrol, int mask,
@@ -1138,8 +1420,8 @@
if (wsink->id == snd_soc_dapm_input) {
if (wsource->id == snd_soc_dapm_micbias ||
wsource->id == snd_soc_dapm_mic ||
- wsink->id == snd_soc_dapm_line ||
- wsink->id == snd_soc_dapm_output)
+ wsource->id == snd_soc_dapm_line ||
+ wsource->id == snd_soc_dapm_output)
wsink->ext = 1;
}
if (wsource->id == snd_soc_dapm_output) {
@@ -1171,6 +1453,8 @@
case snd_soc_dapm_pre:
case snd_soc_dapm_post:
case snd_soc_dapm_supply:
+ case snd_soc_dapm_aif_in:
+ case snd_soc_dapm_aif_out:
list_add(&path->list, &codec->dapm_paths);
list_add(&path->list_sink, &wsink->sources);
list_add(&path->list_source, &wsource->sinks);
@@ -1273,9 +1557,11 @@
dapm_new_mux(codec, w);
break;
case snd_soc_dapm_adc:
+ case snd_soc_dapm_aif_out:
w->power_check = dapm_adc_check_power;
break;
case snd_soc_dapm_dac:
+ case snd_soc_dapm_aif_in:
w->power_check = dapm_dac_check_power;
break;
case snd_soc_dapm_pga:
@@ -1372,7 +1658,7 @@
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
- unsigned short val, val2, val_mask;
+ unsigned int val, val2, val_mask;
int ret;
val = (ucontrol->value.integer.value[0] & mask);
@@ -1436,7 +1722,7 @@
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, bitmask;
+ unsigned int val, bitmask;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
;
@@ -1464,8 +1750,8 @@
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, mux;
- unsigned short mask, bitmask;
+ unsigned int val, mux;
+ unsigned int mask, bitmask;
int ret = 0;
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
@@ -1523,7 +1809,7 @@
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short reg_val, val, mux;
+ unsigned int reg_val, val, mux;
reg_val = snd_soc_read(widget->codec, e->reg);
val = (reg_val >> e->shift_l) & e->mask;
@@ -1563,8 +1849,8 @@
{
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned short val, mux;
- unsigned short mask;
+ unsigned int val, mux;
+ unsigned int mask;
int ret = 0;
if (ucontrol->value.enumerated.item[0] > e->max - 1)
@@ -1880,6 +2166,36 @@
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_free);
+/*
+ * snd_soc_dapm_shutdown - callback for system shutdown
+ */
+void snd_soc_dapm_shutdown(struct snd_soc_device *socdev)
+{
+ struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_dapm_widget *w;
+ LIST_HEAD(down_list);
+ int powerdown = 0;
+
+ list_for_each_entry(w, &codec->dapm_widgets, list) {
+ if (w->power) {
+ dapm_seq_insert(w, &down_list, dapm_down_seq);
+ w->power = 0;
+ powerdown = 1;
+ }
+ }
+
+ /* If there were no widgets to power down we're already in
+ * standby.
+ */
+ if (powerdown) {
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_PREPARE);
+ dapm_seq_run(codec, &down_list, 0, dapm_down_seq);
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_STANDBY);
+ }
+
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_OFF);
+}
+
/* Module information */
MODULE_AUTHOR("Liam Girdwood, lrg@slimlogic.co.uk");
MODULE_DESCRIPTION("Dynamic Audio Power Management core for ALSA SoC");
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 28346fb..1d455ab7 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -73,14 +73,15 @@
oldstatus = jack->status;
jack->status &= ~mask;
- jack->status |= status;
+ jack->status |= status & mask;
- /* The DAPM sync is expensive enough to be worth skipping */
- if (jack->status == oldstatus)
+ /* The DAPM sync is expensive enough to be worth skipping.
+ * However, empty mask means pin synchronization is desired. */
+ if (mask && (jack->status == oldstatus))
goto out;
list_for_each_entry(pin, &jack->pins, list) {
- enable = pin->mask & status;
+ enable = pin->mask & jack->status;
if (pin->invert)
enable = !enable;
@@ -220,6 +221,9 @@
if (ret)
goto err;
+ INIT_WORK(&gpios[i].work, gpio_work);
+ gpios[i].jack = jack;
+
ret = request_irq(gpio_to_irq(gpios[i].gpio),
gpio_handler,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
@@ -228,8 +232,13 @@
if (ret)
goto err;
- INIT_WORK(&gpios[i].work, gpio_work);
- gpios[i].jack = jack;
+#ifdef CONFIG_GPIO_SYSFS
+ /* Expose GPIO value over sysfs for diagnostic purposes */
+ gpio_export(gpios[i].gpio, false);
+#endif
+
+ /* Update initial jack status */
+ snd_soc_jack_gpio_detect(&gpios[i]);
}
return 0;
@@ -258,6 +267,9 @@
int i;
for (i = 0; i < count; i++) {
+#ifdef CONFIG_GPIO_SYSFS
+ gpio_unexport(gpios[i].gpio);
+#endif
free_irq(gpio_to_irq(gpios[i].gpio), &gpios[i]);
gpio_free(gpios[i].gpio);
gpios[i].jack = NULL;
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
index 938a58a..efed64b 100644
--- a/sound/soc/txx9/txx9aclc.c
+++ b/sound/soc/txx9/txx9aclc.c
@@ -297,15 +297,17 @@
static bool filter(struct dma_chan *chan, void *param)
{
struct txx9aclc_dmadata *dmadata = param;
- char devname[20 + 2]; /* FIXME: old BUS_ID_SIZE + 2 */
+ char *devname;
+ bool found = false;
- snprintf(devname, sizeof(devname), "%s.%d", dmadata->dma_res->name,
+ devname = kasprintf(GFP_KERNEL, "%s.%d", dmadata->dma_res->name,
(int)dmadata->dma_res->start);
if (strcmp(dev_name(chan->device->dev), devname) == 0) {
chan->private = &dmadata->dma_slave;
- return true;
+ found = true;
}
- return false;
+ kfree(devname);
+ return found;
}
static int txx9aclc_dma_init(struct txx9aclc_soc_device *dev,
diff --git a/sound/sound_core.c b/sound/sound_core.c
index a41f8b1..bb4b88e 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -128,6 +128,46 @@
#endif
/*
+ * By default, OSS sound_core claims full legacy minor range (0-255)
+ * of SOUND_MAJOR to trap open attempts to any sound minor and
+ * requests modules using custom sound-slot/service-* module aliases.
+ * The only benefit of doing this is allowing use of custom module
+ * aliases instead of the standard char-major-* ones. This behavior
+ * prevents alternative OSS implementation and is scheduled to be
+ * removed.
+ *
+ * CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss kernel
+ * parameter are added to allow distros and developers to try and
+ * switch to alternative implementations without needing to rebuild
+ * the kernel in the meantime. If preclaim_oss is non-zero, the
+ * kernel will behave the same as before. All SOUND_MAJOR minors are
+ * preclaimed and the custom module aliases along with standard chrdev
+ * ones are emitted if a missing device is opened. If preclaim_oss is
+ * zero, sound_core only grabs what's actually in use and for missing
+ * devices only the standard chrdev aliases are requested.
+ *
+ * All these clutters are scheduled to be removed along with
+ * sound-slot/service-* module aliases. Please take a look at
+ * feature-removal-schedule.txt for details.
+ */
+#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM
+static int preclaim_oss = 1;
+#else
+static int preclaim_oss = 0;
+#endif
+
+module_param(preclaim_oss, int, 0444);
+
+static int soundcore_open(struct inode *, struct file *);
+
+static const struct file_operations soundcore_fops =
+{
+ /* We must have an owner or the module locking fails */
+ .owner = THIS_MODULE,
+ .open = soundcore_open,
+};
+
+/*
* Low level list operator. Scan the ordered list, find a hole and
* join into it. Called with the lock asserted
*/
@@ -219,8 +259,9 @@
if (!s)
return -ENOMEM;
-
+
spin_lock(&sound_loader_lock);
+retry:
r = __sound_insert_unit(s, list, fops, index, low, top);
spin_unlock(&sound_loader_lock);
@@ -231,11 +272,31 @@
else
sprintf(s->name, "sound/%s%d", name, r / SOUND_STEP);
+ if (!preclaim_oss) {
+ /*
+ * Something else might have grabbed the minor. If
+ * first free slot is requested, rescan with @low set
+ * to the next unit; otherwise, -EBUSY.
+ */
+ r = __register_chrdev(SOUND_MAJOR, s->unit_minor, 1, s->name,
+ &soundcore_fops);
+ if (r < 0) {
+ spin_lock(&sound_loader_lock);
+ __sound_remove_unit(list, s->unit_minor);
+ if (index < 0) {
+ low = s->unit_minor + SOUND_STEP;
+ goto retry;
+ }
+ spin_unlock(&sound_loader_lock);
+ return -EBUSY;
+ }
+ }
+
device_create(sound_class, dev, MKDEV(SOUND_MAJOR, s->unit_minor),
NULL, s->name+6);
- return r;
+ return s->unit_minor;
- fail:
+fail:
kfree(s);
return r;
}
@@ -254,6 +315,9 @@
p = __sound_remove_unit(list, unit);
spin_unlock(&sound_loader_lock);
if (p) {
+ if (!preclaim_oss)
+ __unregister_chrdev(SOUND_MAJOR, p->unit_minor, 1,
+ p->name);
device_destroy(sound_class, MKDEV(SOUND_MAJOR, p->unit_minor));
kfree(p);
}
@@ -491,19 +555,6 @@
EXPORT_SYMBOL(unregister_sound_dsp);
-/*
- * Now our file operations
- */
-
-static int soundcore_open(struct inode *, struct file *);
-
-static const struct file_operations soundcore_fops=
-{
- /* We must have an owner or the module locking fails */
- .owner = THIS_MODULE,
- .open = soundcore_open,
-};
-
static struct sound_unit *__look_for_unit(int chain, int unit)
{
struct sound_unit *s;
@@ -539,8 +590,9 @@
s = __look_for_unit(chain, unit);
if (s)
new_fops = fops_get(s->unit_fops);
- if (!new_fops) {
+ if (preclaim_oss && !new_fops) {
spin_unlock(&sound_loader_lock);
+
/*
* Please, don't change this order or code.
* For ALSA slot means soundcard and OSS emulation code
@@ -550,6 +602,17 @@
*/
request_module("sound-slot-%i", unit>>4);
request_module("sound-service-%i-%i", unit>>4, chain);
+
+ /*
+ * sound-slot/service-* module aliases are scheduled
+ * for removal in favor of the standard char-major-*
+ * module aliases. For the time being, generate both
+ * the legacy and standard module aliases to ease
+ * transition.
+ */
+ if (request_module("char-major-%d-%d", SOUND_MAJOR, unit) > 0)
+ request_module("char-major-%d", SOUND_MAJOR);
+
spin_lock(&sound_loader_lock);
s = __look_for_unit(chain, unit);
if (s)
@@ -593,7 +656,8 @@
static int __init init_oss_soundcore(void)
{
- if (register_chrdev(SOUND_MAJOR, "sound", &soundcore_fops)==-1) {
+ if (preclaim_oss &&
+ register_chrdev(SOUND_MAJOR, "sound", &soundcore_fops) == -1) {
printk(KERN_ERR "soundcore: sound device already in use.\n");
return -EBUSY;
}
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 44b9cdc..8db0374 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -1083,6 +1083,8 @@
} else
urb_packs = 1;
urb_packs *= packs_per_ms;
+ if (subs->syncpipe)
+ urb_packs = min(urb_packs, 1U << subs->syncinterval);
/* decide how many packets to be used */
if (is_playback) {
@@ -2124,8 +2126,8 @@
fp = list_entry(p, struct audioformat, list);
snd_iprintf(buffer, " Interface %d\n", fp->iface);
snd_iprintf(buffer, " Altset %d\n", fp->altsetting);
- snd_iprintf(buffer, " Format: %#x (%d bits)\n",
- fp->format, snd_pcm_format_width(fp->format));
+ snd_iprintf(buffer, " Format: %s\n",
+ snd_pcm_format_name(fp->format));
snd_iprintf(buffer, " Channels: %d\n", fp->channels);
snd_iprintf(buffer, " Endpoint: %d %s (%s)\n",
fp->endpoint & USB_ENDPOINT_NUMBER_MASK,
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 2fb35cc..0eff19c 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -45,6 +45,7 @@
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/usb.h>
+#include <linux/wait.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include <sound/asequencer.h>
@@ -62,6 +63,9 @@
*/
#define ERROR_DELAY_JIFFIES (HZ / 10)
+#define OUTPUT_URBS 7
+#define INPUT_URBS 7
+
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_DESCRIPTION("USB Audio/MIDI helper module");
@@ -90,7 +94,7 @@
struct usb_protocol_ops {
void (*input)(struct snd_usb_midi_in_endpoint*, uint8_t*, int);
- void (*output)(struct snd_usb_midi_out_endpoint*);
+ void (*output)(struct snd_usb_midi_out_endpoint *ep, struct urb *urb);
void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t);
void (*init_out_endpoint)(struct snd_usb_midi_out_endpoint*);
void (*finish_out_endpoint)(struct snd_usb_midi_out_endpoint*);
@@ -116,11 +120,15 @@
struct snd_usb_midi_out_endpoint {
struct snd_usb_midi* umidi;
- struct urb* urb;
- int urb_active;
+ struct out_urb_context {
+ struct urb *urb;
+ struct snd_usb_midi_out_endpoint *ep;
+ } urbs[OUTPUT_URBS];
+ unsigned int active_urbs;
+ unsigned int drain_urbs;
int max_transfer; /* size of urb buffer */
struct tasklet_struct tasklet;
-
+ unsigned int next_urb;
spinlock_t buffer_lock;
struct usbmidi_out_port {
@@ -139,11 +147,13 @@
uint8_t data[2];
} ports[0x10];
int current_port;
+
+ wait_queue_head_t drain_wait;
};
struct snd_usb_midi_in_endpoint {
struct snd_usb_midi* umidi;
- struct urb* urb;
+ struct urb* urbs[INPUT_URBS];
struct usbmidi_in_port {
struct snd_rawmidi_substream *substream;
u8 running_status_length;
@@ -251,10 +261,17 @@
static void snd_usbmidi_out_urb_complete(struct urb* urb)
{
- struct snd_usb_midi_out_endpoint* ep = urb->context;
+ struct out_urb_context *context = urb->context;
+ struct snd_usb_midi_out_endpoint* ep = context->ep;
+ unsigned int urb_index;
spin_lock(&ep->buffer_lock);
- ep->urb_active = 0;
+ urb_index = context - ep->urbs;
+ ep->active_urbs &= ~(1 << urb_index);
+ if (unlikely(ep->drain_urbs)) {
+ ep->drain_urbs &= ~(1 << urb_index);
+ wake_up(&ep->drain_wait);
+ }
spin_unlock(&ep->buffer_lock);
if (urb->status < 0) {
int err = snd_usbmidi_urb_error(urb->status);
@@ -274,24 +291,38 @@
*/
static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint* ep)
{
- struct urb* urb = ep->urb;
+ unsigned int urb_index;
+ struct urb* urb;
unsigned long flags;
spin_lock_irqsave(&ep->buffer_lock, flags);
- if (ep->urb_active || ep->umidi->chip->shutdown) {
+ if (ep->umidi->chip->shutdown) {
spin_unlock_irqrestore(&ep->buffer_lock, flags);
return;
}
- urb->transfer_buffer_length = 0;
- ep->umidi->usb_protocol_ops->output(ep);
+ urb_index = ep->next_urb;
+ for (;;) {
+ if (!(ep->active_urbs & (1 << urb_index))) {
+ urb = ep->urbs[urb_index].urb;
+ urb->transfer_buffer_length = 0;
+ ep->umidi->usb_protocol_ops->output(ep, urb);
+ if (urb->transfer_buffer_length == 0)
+ break;
- if (urb->transfer_buffer_length > 0) {
- dump_urb("sending", urb->transfer_buffer,
- urb->transfer_buffer_length);
- urb->dev = ep->umidi->chip->dev;
- ep->urb_active = snd_usbmidi_submit_urb(urb, GFP_ATOMIC) >= 0;
+ dump_urb("sending", urb->transfer_buffer,
+ urb->transfer_buffer_length);
+ urb->dev = ep->umidi->chip->dev;
+ if (snd_usbmidi_submit_urb(urb, GFP_ATOMIC) < 0)
+ break;
+ ep->active_urbs |= 1 << urb_index;
+ }
+ if (++urb_index >= OUTPUT_URBS)
+ urb_index = 0;
+ if (urb_index == ep->next_urb)
+ break;
}
+ ep->next_urb = urb_index;
spin_unlock_irqrestore(&ep->buffer_lock, flags);
}
@@ -306,7 +337,7 @@
static void snd_usbmidi_error_timer(unsigned long data)
{
struct snd_usb_midi *umidi = (struct snd_usb_midi *)data;
- int i;
+ unsigned int i, j;
spin_lock(&umidi->disc_lock);
if (umidi->disconnected) {
@@ -317,8 +348,10 @@
struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in;
if (in && in->error_resubmit) {
in->error_resubmit = 0;
- in->urb->dev = umidi->chip->dev;
- snd_usbmidi_submit_urb(in->urb, GFP_ATOMIC);
+ for (j = 0; j < INPUT_URBS; ++j) {
+ in->urbs[j]->dev = umidi->chip->dev;
+ snd_usbmidi_submit_urb(in->urbs[j], GFP_ATOMIC);
+ }
}
if (umidi->endpoints[i].out)
snd_usbmidi_do_output(umidi->endpoints[i].out);
@@ -330,13 +363,14 @@
static int send_bulk_static_data(struct snd_usb_midi_out_endpoint* ep,
const void *data, int len)
{
- int err;
+ int err = 0;
void *buf = kmemdup(data, len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
dump_urb("sending", buf, len);
- err = usb_bulk_msg(ep->umidi->chip->dev, ep->urb->pipe, buf, len,
- NULL, 250);
+ if (ep->urbs[0].urb)
+ err = usb_bulk_msg(ep->umidi->chip->dev, ep->urbs[0].urb->pipe,
+ buf, len, NULL, 250);
kfree(buf);
return err;
}
@@ -554,9 +588,9 @@
}
}
-static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
- struct urb* urb = ep->urb;
int p;
/* FIXME: lower-numbered ports can starve higher-numbered ports */
@@ -613,14 +647,15 @@
snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1);
}
-static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
uint8_t* transfer_buffer;
int count;
if (!ep->ports[0].active)
return;
- transfer_buffer = ep->urb->transfer_buffer;
+ transfer_buffer = urb->transfer_buffer;
count = snd_rawmidi_transmit(ep->ports[0].substream,
&transfer_buffer[2],
ep->max_transfer - 2);
@@ -630,7 +665,7 @@
}
transfer_buffer[0] = 0;
transfer_buffer[1] = count;
- ep->urb->transfer_buffer_length = 2 + count;
+ urb->transfer_buffer_length = 2 + count;
}
static struct usb_protocol_ops snd_usbmidi_novation_ops = {
@@ -648,20 +683,21 @@
snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
}
-static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
int count;
if (!ep->ports[0].active)
return;
count = snd_rawmidi_transmit(ep->ports[0].substream,
- ep->urb->transfer_buffer,
+ urb->transfer_buffer,
ep->max_transfer);
if (count < 1) {
ep->ports[0].active = 0;
return;
}
- ep->urb->transfer_buffer_length = count;
+ urb->transfer_buffer_length = count;
}
static struct usb_protocol_ops snd_usbmidi_raw_ops = {
@@ -681,23 +717,25 @@
snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
}
-static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep)
+static void snd_usbmidi_us122l_output(struct snd_usb_midi_out_endpoint *ep,
+ struct urb *urb)
{
int count;
if (!ep->ports[0].active)
return;
- count = ep->urb->dev->speed == USB_SPEED_HIGH ? 1 : 2;
+ count = snd_usb_get_speed(ep->umidi->chip->dev) == USB_SPEED_HIGH
+ ? 1 : 2;
count = snd_rawmidi_transmit(ep->ports[0].substream,
- ep->urb->transfer_buffer,
+ urb->transfer_buffer,
count);
if (count < 1) {
ep->ports[0].active = 0;
return;
}
- memset(ep->urb->transfer_buffer + count, 0xFD, 9 - count);
- ep->urb->transfer_buffer_length = count;
+ memset(urb->transfer_buffer + count, 0xFD, 9 - count);
+ urb->transfer_buffer_length = count;
}
static struct usb_protocol_ops snd_usbmidi_122l_ops = {
@@ -786,10 +824,11 @@
}
}
-static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint* ep,
+ struct urb *urb)
{
int port0 = ep->current_port;
- uint8_t* buf = ep->urb->transfer_buffer;
+ uint8_t* buf = urb->transfer_buffer;
int buf_free = ep->max_transfer;
int length, i;
@@ -829,7 +868,7 @@
*buf = 0xff;
--buf_free;
}
- ep->urb->transfer_buffer_length = ep->max_transfer - buf_free;
+ urb->transfer_buffer_length = ep->max_transfer - buf_free;
}
static struct usb_protocol_ops snd_usbmidi_emagic_ops = {
@@ -884,6 +923,35 @@
}
}
+static void snd_usbmidi_output_drain(struct snd_rawmidi_substream *substream)
+{
+ struct usbmidi_out_port* port = substream->runtime->private_data;
+ struct snd_usb_midi_out_endpoint *ep = port->ep;
+ unsigned int drain_urbs;
+ DEFINE_WAIT(wait);
+ long timeout = msecs_to_jiffies(50);
+
+ /*
+ * The substream buffer is empty, but some data might still be in the
+ * currently active URBs, so we have to wait for those to complete.
+ */
+ spin_lock_irq(&ep->buffer_lock);
+ drain_urbs = ep->active_urbs;
+ if (drain_urbs) {
+ ep->drain_urbs |= drain_urbs;
+ do {
+ prepare_to_wait(&ep->drain_wait, &wait,
+ TASK_UNINTERRUPTIBLE);
+ spin_unlock_irq(&ep->buffer_lock);
+ timeout = schedule_timeout(timeout);
+ spin_lock_irq(&ep->buffer_lock);
+ drain_urbs &= ep->drain_urbs;
+ } while (drain_urbs && timeout);
+ finish_wait(&ep->drain_wait, &wait);
+ }
+ spin_unlock_irq(&ep->buffer_lock);
+}
+
static int snd_usbmidi_input_open(struct snd_rawmidi_substream *substream)
{
return 0;
@@ -908,6 +976,7 @@
.open = snd_usbmidi_output_open,
.close = snd_usbmidi_output_close,
.trigger = snd_usbmidi_output_trigger,
+ .drain = snd_usbmidi_output_drain,
};
static struct snd_rawmidi_ops snd_usbmidi_input_ops = {
@@ -916,19 +985,26 @@
.trigger = snd_usbmidi_input_trigger
};
+static void free_urb_and_buffer(struct snd_usb_midi *umidi, struct urb *urb,
+ unsigned int buffer_length)
+{
+ usb_buffer_free(umidi->chip->dev, buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+ usb_free_urb(urb);
+}
+
/*
* Frees an input endpoint.
* May be called when ep hasn't been initialized completely.
*/
static void snd_usbmidi_in_endpoint_delete(struct snd_usb_midi_in_endpoint* ep)
{
- if (ep->urb) {
- usb_buffer_free(ep->umidi->chip->dev,
- ep->urb->transfer_buffer_length,
- ep->urb->transfer_buffer,
- ep->urb->transfer_dma);
- usb_free_urb(ep->urb);
- }
+ unsigned int i;
+
+ for (i = 0; i < INPUT_URBS; ++i)
+ if (ep->urbs[i])
+ free_urb_and_buffer(ep->umidi, ep->urbs[i],
+ ep->urbs[i]->transfer_buffer_length);
kfree(ep);
}
@@ -943,6 +1019,7 @@
void* buffer;
unsigned int pipe;
int length;
+ unsigned int i;
rep->in = NULL;
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
@@ -950,30 +1027,36 @@
return -ENOMEM;
ep->umidi = umidi;
- ep->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ep->urb) {
- snd_usbmidi_in_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < INPUT_URBS; ++i) {
+ ep->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ep->urbs[i]) {
+ snd_usbmidi_in_endpoint_delete(ep);
+ return -ENOMEM;
+ }
}
if (ep_info->in_interval)
pipe = usb_rcvintpipe(umidi->chip->dev, ep_info->in_ep);
else
pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep);
length = usb_maxpacket(umidi->chip->dev, pipe, 0);
- buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL,
- &ep->urb->transfer_dma);
- if (!buffer) {
- snd_usbmidi_in_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < INPUT_URBS; ++i) {
+ buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL,
+ &ep->urbs[i]->transfer_dma);
+ if (!buffer) {
+ snd_usbmidi_in_endpoint_delete(ep);
+ return -ENOMEM;
+ }
+ if (ep_info->in_interval)
+ usb_fill_int_urb(ep->urbs[i], umidi->chip->dev,
+ pipe, buffer, length,
+ snd_usbmidi_in_urb_complete,
+ ep, ep_info->in_interval);
+ else
+ usb_fill_bulk_urb(ep->urbs[i], umidi->chip->dev,
+ pipe, buffer, length,
+ snd_usbmidi_in_urb_complete, ep);
+ ep->urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
}
- if (ep_info->in_interval)
- usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer,
- length, snd_usbmidi_in_urb_complete, ep,
- ep_info->in_interval);
- else
- usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer,
- length, snd_usbmidi_in_urb_complete, ep);
- ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
rep->in = ep;
return 0;
@@ -994,12 +1077,12 @@
*/
static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint* ep)
{
- if (ep->urb) {
- usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer,
- ep->urb->transfer_buffer,
- ep->urb->transfer_dma);
- usb_free_urb(ep->urb);
- }
+ unsigned int i;
+
+ for (i = 0; i < OUTPUT_URBS; ++i)
+ if (ep->urbs[i].urb)
+ free_urb_and_buffer(ep->umidi, ep->urbs[i].urb,
+ ep->max_transfer);
kfree(ep);
}
@@ -1011,7 +1094,7 @@
struct snd_usb_midi_endpoint* rep)
{
struct snd_usb_midi_out_endpoint* ep;
- int i;
+ unsigned int i;
unsigned int pipe;
void* buffer;
@@ -1021,38 +1104,46 @@
return -ENOMEM;
ep->umidi = umidi;
- ep->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ep->urb) {
- snd_usbmidi_out_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < OUTPUT_URBS; ++i) {
+ ep->urbs[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ep->urbs[i].urb) {
+ snd_usbmidi_out_endpoint_delete(ep);
+ return -ENOMEM;
+ }
+ ep->urbs[i].ep = ep;
}
if (ep_info->out_interval)
pipe = usb_sndintpipe(umidi->chip->dev, ep_info->out_ep);
else
pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep);
if (umidi->chip->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
- /* FIXME: we need more URBs to get reasonable bandwidth here: */
ep->max_transfer = 4;
else
ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
- buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer,
- GFP_KERNEL, &ep->urb->transfer_dma);
- if (!buffer) {
- snd_usbmidi_out_endpoint_delete(ep);
- return -ENOMEM;
+ for (i = 0; i < OUTPUT_URBS; ++i) {
+ buffer = usb_buffer_alloc(umidi->chip->dev,
+ ep->max_transfer, GFP_KERNEL,
+ &ep->urbs[i].urb->transfer_dma);
+ if (!buffer) {
+ snd_usbmidi_out_endpoint_delete(ep);
+ return -ENOMEM;
+ }
+ if (ep_info->out_interval)
+ usb_fill_int_urb(ep->urbs[i].urb, umidi->chip->dev,
+ pipe, buffer, ep->max_transfer,
+ snd_usbmidi_out_urb_complete,
+ &ep->urbs[i], ep_info->out_interval);
+ else
+ usb_fill_bulk_urb(ep->urbs[i].urb, umidi->chip->dev,
+ pipe, buffer, ep->max_transfer,
+ snd_usbmidi_out_urb_complete,
+ &ep->urbs[i]);
+ ep->urbs[i].urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
}
- if (ep_info->out_interval)
- usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer,
- ep->max_transfer, snd_usbmidi_out_urb_complete,
- ep, ep_info->out_interval);
- else
- usb_fill_bulk_urb(ep->urb, umidi->chip->dev,
- pipe, buffer, ep->max_transfer,
- snd_usbmidi_out_urb_complete, ep);
- ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
spin_lock_init(&ep->buffer_lock);
tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep);
+ init_waitqueue_head(&ep->drain_wait);
for (i = 0; i < 0x10; ++i)
if (ep_info->out_cables & (1 << i)) {
@@ -1090,7 +1181,7 @@
void snd_usbmidi_disconnect(struct list_head* p)
{
struct snd_usb_midi* umidi;
- int i;
+ unsigned int i, j;
umidi = list_entry(p, struct snd_usb_midi, list);
/*
@@ -1105,13 +1196,15 @@
struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
if (ep->out)
tasklet_kill(&ep->out->tasklet);
- if (ep->out && ep->out->urb) {
- usb_kill_urb(ep->out->urb);
+ if (ep->out) {
+ for (j = 0; j < OUTPUT_URBS; ++j)
+ usb_kill_urb(ep->out->urbs[j].urb);
if (umidi->usb_protocol_ops->finish_out_endpoint)
umidi->usb_protocol_ops->finish_out_endpoint(ep->out);
}
if (ep->in)
- usb_kill_urb(ep->in->urb);
+ for (j = 0; j < INPUT_URBS; ++j)
+ usb_kill_urb(ep->in->urbs[j]);
/* free endpoints here; later call can result in Oops */
if (ep->out) {
snd_usbmidi_out_endpoint_delete(ep->out);
@@ -1692,20 +1785,25 @@
void snd_usbmidi_input_stop(struct list_head* p)
{
struct snd_usb_midi* umidi;
- int i;
+ unsigned int i, j;
umidi = list_entry(p, struct snd_usb_midi, list);
for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i];
if (ep->in)
- usb_kill_urb(ep->in->urb);
+ for (j = 0; j < INPUT_URBS; ++j)
+ usb_kill_urb(ep->in->urbs[j]);
}
}
static void snd_usbmidi_input_start_ep(struct snd_usb_midi_in_endpoint* ep)
{
- if (ep) {
- struct urb* urb = ep->urb;
+ unsigned int i;
+
+ if (!ep)
+ return;
+ for (i = 0; i < INPUT_URBS; ++i) {
+ struct urb* urb = ep->urbs[i];
urb->dev = ep->umidi->chip->dev;
snd_usbmidi_submit_urb(urb, GFP_KERNEL);
}
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ec9cdf9..ab5a3ac 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -86,6 +86,7 @@
u8 rc_buffer[6];
u8 audigy2nx_leds[3];
+ u8 xonar_u1_status;
};
@@ -461,7 +462,7 @@
unsigned int size, unsigned int __user *_tlv)
{
struct usb_mixer_elem_info *cval = kcontrol->private_data;
- DECLARE_TLV_DB_SCALE(scale, 0, 0, 0);
+ DECLARE_TLV_DB_MINMAX(scale, 0, 0);
if (size < sizeof(scale))
return -ENOMEM;
@@ -469,7 +470,16 @@
* while ALSA TLV contains in 1/100 dB unit
*/
scale[2] = (convert_signed_value(cval, cval->min) * 100) / 256;
- scale[3] = (convert_signed_value(cval, cval->res) * 100) / 256;
+ scale[3] = (convert_signed_value(cval, cval->max) * 100) / 256;
+ if (scale[3] <= scale[2]) {
+ /* something is wrong; assume it's either from/to 0dB */
+ if (scale[2] < 0)
+ scale[3] = 0;
+ else if (scale[2] > 0)
+ scale[2] = 0;
+ else /* totally crap, return an error */
+ return -EINVAL;
+ }
if (copy_to_user(_tlv, scale, sizeof(scale)))
return -EFAULT;
return 0;
@@ -2033,6 +2043,58 @@
}
}
+static int snd_xonar_u1_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = !!(mixer->xonar_u1_status & 0x02);
+ return 0;
+}
+
+static int snd_xonar_u1_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol);
+ u8 old_status, new_status;
+ int err, changed;
+
+ old_status = mixer->xonar_u1_status;
+ if (ucontrol->value.integer.value[0])
+ new_status = old_status | 0x02;
+ else
+ new_status = old_status & ~0x02;
+ changed = new_status != old_status;
+ err = snd_usb_ctl_msg(mixer->chip->dev,
+ usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ 50, 0, &new_status, 1, 100);
+ if (err < 0)
+ return err;
+ mixer->xonar_u1_status = new_status;
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_xonar_u1_output_switch = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Digital Playback Switch",
+ .info = snd_ctl_boolean_mono_info,
+ .get = snd_xonar_u1_switch_get,
+ .put = snd_xonar_u1_switch_put,
+};
+
+static int snd_xonar_u1_controls_create(struct usb_mixer_interface *mixer)
+{
+ int err;
+
+ err = snd_ctl_add(mixer->chip->card,
+ snd_ctl_new1(&snd_xonar_u1_output_switch, mixer));
+ if (err < 0)
+ return err;
+ mixer->xonar_u1_status = 0x05;
+ return 0;
+}
+
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
int ignore_error)
{
@@ -2075,6 +2137,13 @@
snd_audigy2nx_proc_read);
}
+ if (mixer->chip->usb_id == USB_ID(0x0b05, 0x1739) ||
+ mixer->chip->usb_id == USB_ID(0x0b05, 0x1743)) {
+ err = snd_xonar_u1_controls_create(mixer);
+ if (err < 0)
+ goto _error;
+ }
+
err = snd_device_new(chip->card, SNDRV_DEV_LOWLEVEL, mixer, &dev_ops);
if (err < 0)
goto _error;
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 6be696b..0ff23de 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -91,6 +91,10 @@
--no-samples::
Don't sample.
+-R::
+--raw-samples::
+Collect raw sample records from all opened counters (typically for tracepoint counters).
+
SEE ALSO
--------
linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index e72e931..59f0b84 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -27,6 +27,9 @@
-n
--show-nr-samples
Show the number of samples for each symbol
+-T
+--threads
+ Show per-thread event counters
-C::
--comms=::
Only consider symbols in these comms. CSV that understands
@@ -48,6 +51,16 @@
all occurances of this separator in symbol names (and other output)
with a '.' character, that thus it's the only non valid separator.
+-g [type,min]::
+--call-graph::
+ Display callchains using type and min percent threshold.
+ type can be either:
+ - flat: single column, linear exposure of callchains.
+ - graph: use a graph tree, displaying absolute overhead rates.
+ - fractal: like graph, but displays relative rates. Each branch of
+ the tree is considered as a new profiled object. +
+ Default: fractal,0.5.
+
SEE ALSO
--------
linkperf:perf-stat[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index c045b42..9f8d207 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -166,7 +166,35 @@
# CFLAGS and LDFLAGS are for the users to override from the command line.
-CFLAGS = $(M64) -ggdb3 -Wall -Wextra -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
+#
+# Include saner warnings here, which can catch bugs:
+#
+
+EXTRA_WARNINGS := -Wcast-align
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Winit-self
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wpacked
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wredundant-decls
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstack-protector
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-aliasing=3
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-default
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-enum
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wno-system-headers
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wundef
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wvolatile-register-var
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wwrite-strings
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wbad-function-cast
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-declarations
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-prototypes
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wnested-externs
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wold-style-definition
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
+EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
+
+CFLAGS = $(M64) -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -fstack-protector-all -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS)
LDFLAGS = -lpthread -lrt -lelf -lm
ALL_CFLAGS = $(CFLAGS)
ALL_LDFLAGS = $(LDFLAGS)
@@ -310,6 +338,7 @@
LIB_H += util/symbol.h
LIB_H += util/module.h
LIB_H += util/color.h
+LIB_H += util/values.h
LIB_OBJS += util/abspath.o
LIB_OBJS += util/alias.o
@@ -337,6 +366,13 @@
LIB_OBJS += util/pager.o
LIB_OBJS += util/header.o
LIB_OBJS += util/callchain.o
+LIB_OBJS += util/values.o
+LIB_OBJS += util/debug.o
+LIB_OBJS += util/map.o
+LIB_OBJS += util/thread.o
+LIB_OBJS += util/trace-event-parse.o
+LIB_OBJS += util/trace-event-read.o
+LIB_OBJS += util/trace-event-info.o
BUILTIN_OBJS += builtin-annotate.o
BUILTIN_OBJS += builtin-help.o
@@ -345,6 +381,7 @@
BUILTIN_OBJS += builtin-report.o
BUILTIN_OBJS += builtin-stat.o
BUILTIN_OBJS += builtin-top.o
+BUILTIN_OBJS += builtin-trace.o
PERFLIBS = $(LIB_FILE)
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 343e7b1..043d85b 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -17,30 +17,21 @@
#include "util/string.h"
#include "perf.h"
+#include "util/debug.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
-
-#define SHOW_KERNEL 1
-#define SHOW_USER 2
-#define SHOW_HV 4
+#include "util/thread.h"
static char const *input_name = "perf.data";
-static char *vmlinux = "vmlinux";
static char default_sort_order[] = "comm,symbol";
static char *sort_order = default_sort_order;
+static int force;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
-static int dump_trace = 0;
-#define dprintf(x...) do { if (dump_trace) printf(x); } while (0)
-
-static int verbose;
-
-static int modules;
-
static int full_paths;
static int print_line;
@@ -48,39 +39,8 @@
static unsigned long page_size;
static unsigned long mmap_window = 32;
-struct ip_event {
- struct perf_event_header header;
- u64 ip;
- u32 pid, tid;
-};
-
-struct mmap_event {
- struct perf_event_header header;
- u32 pid, tid;
- u64 start;
- u64 len;
- u64 pgoff;
- char filename[PATH_MAX];
-};
-
-struct comm_event {
- struct perf_event_header header;
- u32 pid, tid;
- char comm[16];
-};
-
-struct fork_event {
- struct perf_event_header header;
- u32 pid, ppid;
-};
-
-typedef union event_union {
- struct perf_event_header header;
- struct ip_event ip;
- struct mmap_event mmap;
- struct comm_event comm;
- struct fork_event fork;
-} event_t;
+static struct rb_root threads;
+static struct thread *last_match;
struct sym_ext {
@@ -89,323 +49,6 @@
char *path;
};
-static LIST_HEAD(dsos);
-static struct dso *kernel_dso;
-static struct dso *vdso;
-
-
-static void dsos__add(struct dso *dso)
-{
- list_add_tail(&dso->node, &dsos);
-}
-
-static struct dso *dsos__find(const char *name)
-{
- struct dso *pos;
-
- list_for_each_entry(pos, &dsos, node)
- if (strcmp(pos->name, name) == 0)
- return pos;
- return NULL;
-}
-
-static struct dso *dsos__findnew(const char *name)
-{
- struct dso *dso = dsos__find(name);
- int nr;
-
- if (dso)
- return dso;
-
- dso = dso__new(name, 0);
- if (!dso)
- goto out_delete_dso;
-
- nr = dso__load(dso, NULL, verbose);
- if (nr < 0) {
- if (verbose)
- fprintf(stderr, "Failed to open: %s\n", name);
- goto out_delete_dso;
- }
- if (!nr && verbose) {
- fprintf(stderr,
- "No symbols found in: %s, maybe install a debug package?\n",
- name);
- }
-
- dsos__add(dso);
-
- return dso;
-
-out_delete_dso:
- dso__delete(dso);
- return NULL;
-}
-
-static void dsos__fprintf(FILE *fp)
-{
- struct dso *pos;
-
- list_for_each_entry(pos, &dsos, node)
- dso__fprintf(pos, fp);
-}
-
-static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
-{
- return dso__find_symbol(dso, ip);
-}
-
-static int load_kernel(void)
-{
- int err;
-
- kernel_dso = dso__new("[kernel]", 0);
- if (!kernel_dso)
- return -1;
-
- err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
- if (err <= 0) {
- dso__delete(kernel_dso);
- kernel_dso = NULL;
- } else
- dsos__add(kernel_dso);
-
- vdso = dso__new("[vdso]", 0);
- if (!vdso)
- return -1;
-
- vdso->find_symbol = vdso__find_symbol;
-
- dsos__add(vdso);
-
- return err;
-}
-
-struct map {
- struct list_head node;
- u64 start;
- u64 end;
- u64 pgoff;
- u64 (*map_ip)(struct map *, u64);
- struct dso *dso;
-};
-
-static u64 map__map_ip(struct map *map, u64 ip)
-{
- return ip - map->start + map->pgoff;
-}
-
-static u64 vdso__map_ip(struct map *map __used, u64 ip)
-{
- return ip;
-}
-
-static struct map *map__new(struct mmap_event *event)
-{
- struct map *self = malloc(sizeof(*self));
-
- if (self != NULL) {
- const char *filename = event->filename;
-
- self->start = event->start;
- self->end = event->start + event->len;
- self->pgoff = event->pgoff;
-
- self->dso = dsos__findnew(filename);
- if (self->dso == NULL)
- goto out_delete;
-
- if (self->dso == vdso)
- self->map_ip = vdso__map_ip;
- else
- self->map_ip = map__map_ip;
- }
- return self;
-out_delete:
- free(self);
- return NULL;
-}
-
-static struct map *map__clone(struct map *self)
-{
- struct map *map = malloc(sizeof(*self));
-
- if (!map)
- return NULL;
-
- memcpy(map, self, sizeof(*self));
-
- return map;
-}
-
-static int map__overlap(struct map *l, struct map *r)
-{
- if (l->start > r->start) {
- struct map *t = l;
- l = r;
- r = t;
- }
-
- if (l->end > r->start)
- return 1;
-
- return 0;
-}
-
-static size_t map__fprintf(struct map *self, FILE *fp)
-{
- return fprintf(fp, " %Lx-%Lx %Lx %s\n",
- self->start, self->end, self->pgoff, self->dso->name);
-}
-
-
-struct thread {
- struct rb_node rb_node;
- struct list_head maps;
- pid_t pid;
- char *comm;
-};
-
-static struct thread *thread__new(pid_t pid)
-{
- struct thread *self = malloc(sizeof(*self));
-
- if (self != NULL) {
- self->pid = pid;
- self->comm = malloc(32);
- if (self->comm)
- snprintf(self->comm, 32, ":%d", self->pid);
- INIT_LIST_HEAD(&self->maps);
- }
-
- return self;
-}
-
-static int thread__set_comm(struct thread *self, const char *comm)
-{
- if (self->comm)
- free(self->comm);
- self->comm = strdup(comm);
- return self->comm ? 0 : -ENOMEM;
-}
-
-static size_t thread__fprintf(struct thread *self, FILE *fp)
-{
- struct map *pos;
- size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
-
- list_for_each_entry(pos, &self->maps, node)
- ret += map__fprintf(pos, fp);
-
- return ret;
-}
-
-
-static struct rb_root threads;
-static struct thread *last_match;
-
-static struct thread *threads__findnew(pid_t pid)
-{
- struct rb_node **p = &threads.rb_node;
- struct rb_node *parent = NULL;
- struct thread *th;
-
- /*
- * Font-end cache - PID lookups come in blocks,
- * so most of the time we dont have to look up
- * the full rbtree:
- */
- if (last_match && last_match->pid == pid)
- return last_match;
-
- while (*p != NULL) {
- parent = *p;
- th = rb_entry(parent, struct thread, rb_node);
-
- if (th->pid == pid) {
- last_match = th;
- return th;
- }
-
- if (pid < th->pid)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
- }
-
- th = thread__new(pid);
- if (th != NULL) {
- rb_link_node(&th->rb_node, parent, p);
- rb_insert_color(&th->rb_node, &threads);
- last_match = th;
- }
-
- return th;
-}
-
-static void thread__insert_map(struct thread *self, struct map *map)
-{
- struct map *pos, *tmp;
-
- list_for_each_entry_safe(pos, tmp, &self->maps, node) {
- if (map__overlap(pos, map)) {
- list_del_init(&pos->node);
- /* XXX leaks dsos */
- free(pos);
- }
- }
-
- list_add_tail(&map->node, &self->maps);
-}
-
-static int thread__fork(struct thread *self, struct thread *parent)
-{
- struct map *map;
-
- if (self->comm)
- free(self->comm);
- self->comm = strdup(parent->comm);
- if (!self->comm)
- return -ENOMEM;
-
- list_for_each_entry(map, &parent->maps, node) {
- struct map *new = map__clone(map);
- if (!new)
- return -ENOMEM;
- thread__insert_map(self, new);
- }
-
- return 0;
-}
-
-static struct map *thread__find_map(struct thread *self, u64 ip)
-{
- struct map *pos;
-
- if (self == NULL)
- return NULL;
-
- list_for_each_entry(pos, &self->maps, node)
- if (ip >= pos->start && ip <= pos->end)
- return pos;
-
- return NULL;
-}
-
-static size_t threads__fprintf(FILE *fp)
-{
- size_t ret = 0;
- struct rb_node *nd;
-
- for (nd = rb_first(&threads); nd; nd = rb_next(nd)) {
- struct thread *pos = rb_entry(nd, struct thread, rb_node);
-
- ret += thread__fprintf(pos, fp);
- }
-
- return ret;
-}
-
/*
* histogram, sorted on item, collects counts
*/
@@ -432,7 +75,7 @@
struct sort_entry {
struct list_head list;
- char *header;
+ const char *header;
int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
@@ -576,7 +219,7 @@
static int sort__need_collapse = 0;
struct sort_dimension {
- char *name;
+ const char *name;
struct sort_entry *entry;
int taken;
};
@@ -829,17 +472,6 @@
}
}
-static void register_idle_thread(void)
-{
- struct thread *thread = threads__findnew(0);
-
- if (thread == NULL ||
- thread__set_comm(thread, "[idle]")) {
- fprintf(stderr, "problem inserting idle task.\n");
- exit(-1);
- }
-}
-
static unsigned long total = 0,
total_mmap = 0,
total_comm = 0,
@@ -852,18 +484,20 @@
char level;
int show = 0;
struct dso *dso = NULL;
- struct thread *thread = threads__findnew(event->ip.pid);
+ struct thread *thread;
u64 ip = event->ip.ip;
struct map *map = NULL;
- dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n",
+ thread = threads__findnew(event->ip.pid, &threads, &last_match);
+
+ dump_printf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.misc,
event->ip.pid,
(void *)(long)ip);
- dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+ dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
if (thread == NULL) {
fprintf(stderr, "problem processing %d event, skipping it.\n",
@@ -877,7 +511,7 @@
dso = kernel_dso;
- dprintf(" ...... dso: %s\n", dso->name);
+ dump_printf(" ...... dso: %s\n", dso->name);
} else if (event->header.misc & PERF_EVENT_MISC_USER) {
@@ -898,12 +532,12 @@
if ((long long)ip < 0)
dso = kernel_dso;
}
- dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+ dump_printf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
} else {
show = SHOW_HV;
level = 'H';
- dprintf(" ...... dso: [hypervisor]\n");
+ dump_printf(" ...... dso: [hypervisor]\n");
}
if (show & show_mask) {
@@ -926,10 +560,12 @@
static int
process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct thread *thread = threads__findnew(event->mmap.pid);
- struct map *map = map__new(&event->mmap);
+ struct thread *thread;
+ struct map *map = map__new(&event->mmap, NULL, 0);
- dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
+ thread = threads__findnew(event->mmap.pid, &threads, &last_match);
+
+ dump_printf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->mmap.pid,
@@ -939,7 +575,7 @@
event->mmap.filename);
if (thread == NULL || map == NULL) {
- dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n");
+ dump_printf("problem processing PERF_EVENT_MMAP, skipping event.\n");
return 0;
}
@@ -952,16 +588,17 @@
static int
process_comm_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct thread *thread = threads__findnew(event->comm.pid);
+ struct thread *thread;
- dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
+ thread = threads__findnew(event->comm.pid, &threads, &last_match);
+ dump_printf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->comm.comm, event->comm.pid);
if (thread == NULL ||
thread__set_comm(thread, event->comm.comm)) {
- dprintf("problem processing PERF_EVENT_COMM, skipping event.\n");
+ dump_printf("problem processing PERF_EVENT_COMM, skipping event.\n");
return -1;
}
total_comm++;
@@ -972,10 +609,12 @@
static int
process_fork_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct thread *thread = threads__findnew(event->fork.pid);
- struct thread *parent = threads__findnew(event->fork.ppid);
+ struct thread *thread;
+ struct thread *parent;
- dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
+ thread = threads__findnew(event->fork.pid, &threads, &last_match);
+ parent = threads__findnew(event->fork.ppid, &threads, &last_match);
+ dump_printf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->fork.pid, event->fork.ppid);
@@ -988,7 +627,7 @@
return 0;
if (!thread || !parent || thread__fork(thread, parent)) {
- dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
+ dump_printf("problem processing PERF_EVENT_FORK, skipping event.\n");
return -1;
}
total_fork++;
@@ -1074,7 +713,7 @@
const char *path = NULL;
unsigned int hits = 0;
double percent = 0.0;
- char *color;
+ const char *color;
struct sym_ext *sym_ext = sym->priv;
offset = line_ip - start;
@@ -1156,7 +795,7 @@
/* Get the filename:line for the colored entries */
static void
-get_source_line(struct symbol *sym, u64 start, int len, char *filename)
+get_source_line(struct symbol *sym, u64 start, int len, const char *filename)
{
int i;
char cmd[PATH_MAX * 2];
@@ -1202,7 +841,7 @@
}
}
-static void print_summary(char *filename)
+static void print_summary(const char *filename)
{
struct sym_ext *sym_ext;
struct rb_node *node;
@@ -1218,7 +857,7 @@
node = rb_first(&root_sym_ext);
while (node) {
double percent;
- char *color;
+ const char *color;
char *path;
sym_ext = rb_entry(node, struct sym_ext, node);
@@ -1233,7 +872,7 @@
static void annotate_sym(struct dso *dso, struct symbol *sym)
{
- char *filename = dso->name, *d_filename;
+ const char *filename = dso->name, *d_filename;
u64 start, end, len;
char command[PATH_MAX*2];
FILE *file;
@@ -1243,7 +882,7 @@
if (sym->module)
filename = sym->module->path;
else if (dso == kernel_dso)
- filename = vmlinux;
+ filename = vmlinux_name;
start = sym->obj_start;
if (!start)
@@ -1315,12 +954,12 @@
int ret, rc = EXIT_FAILURE;
unsigned long offset = 0;
unsigned long head = 0;
- struct stat stat;
+ struct stat input_stat;
event_t *event;
uint32_t size;
char *buf;
- register_idle_thread();
+ register_idle_thread(&threads, &last_match);
input = open(input_name, O_RDONLY);
if (input < 0) {
@@ -1328,13 +967,18 @@
exit(-1);
}
- ret = fstat(input, &stat);
+ ret = fstat(input, &input_stat);
if (ret < 0) {
perror("failed to stat file");
exit(-1);
}
- if (!stat.st_size) {
+ if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user or root\n", input_name);
+ exit(-1);
+ }
+
+ if (!input_stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
}
@@ -1361,10 +1005,10 @@
if (head + event->header.size >= page_size * mmap_window) {
unsigned long shift = page_size * (head / page_size);
- int ret;
+ int munmap_ret;
- ret = munmap(buf, page_size * mmap_window);
- assert(ret == 0);
+ munmap_ret = munmap(buf, page_size * mmap_window);
+ assert(munmap_ret == 0);
offset += shift;
head -= shift;
@@ -1373,14 +1017,14 @@
size = event->header.size;
- dprintf("%p [%p]: event: %d\n",
+ dump_printf("%p [%p]: event: %d\n",
(void *)(offset + head),
(void *)(long)event->header.size,
event->header.type);
if (!size || process_event(event, offset, head) < 0) {
- dprintf("%p [%p]: skipping unknown header type: %d\n",
+ dump_printf("%p [%p]: skipping unknown header type: %d\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.type);
@@ -1400,23 +1044,23 @@
head += size;
- if (offset + head < (unsigned long)stat.st_size)
+ if (offset + head < (unsigned long)input_stat.st_size)
goto more;
rc = EXIT_SUCCESS;
close(input);
- dprintf(" IP events: %10ld\n", total);
- dprintf(" mmap events: %10ld\n", total_mmap);
- dprintf(" comm events: %10ld\n", total_comm);
- dprintf(" fork events: %10ld\n", total_fork);
- dprintf(" unknown events: %10ld\n", total_unknown);
+ dump_printf(" IP events: %10ld\n", total);
+ dump_printf(" mmap events: %10ld\n", total_mmap);
+ dump_printf(" comm events: %10ld\n", total_comm);
+ dump_printf(" fork events: %10ld\n", total_fork);
+ dump_printf(" unknown events: %10ld\n", total_unknown);
if (dump_trace)
return 0;
if (verbose >= 3)
- threads__fprintf(stdout);
+ threads__fprintf(stdout, &threads);
if (verbose >= 2)
dsos__fprintf(stdout);
@@ -1439,11 +1083,12 @@
"input file name"),
OPT_STRING('s', "symbol", &sym_hist_filter, "symbol",
"symbol to annotate"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
- OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_STRING('k', "vmlinux", &vmlinux_name, "file", "vmlinux pathname"),
OPT_BOOLEAN('m', "modules", &modules,
"load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('l', "print-line", &print_line,
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 2599d86..4fb8734 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -456,6 +456,7 @@
break;
case HELP_FORMAT_WEB:
show_html_page(argv[0]);
+ default:
break;
}
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 89a5ddc..99a12fe 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -15,6 +15,9 @@
#include "util/string.h"
#include "util/header.h"
+#include "util/event.h"
+#include "util/debug.h"
+#include "util/trace-event.h"
#include <unistd.h>
#include <sched.h>
@@ -42,7 +45,6 @@
static int force = 0;
static int append_file = 0;
static int call_graph = 0;
-static int verbose = 0;
static int inherit_stat = 0;
static int no_samples = 0;
static int sample_address = 0;
@@ -62,24 +64,6 @@
struct perf_header *header;
-struct mmap_event {
- struct perf_event_header header;
- u32 pid;
- u32 tid;
- u64 start;
- u64 len;
- u64 pgoff;
- char filename[PATH_MAX];
-};
-
-struct comm_event {
- struct perf_event_header header;
- u32 pid;
- u32 tid;
- char comm[16];
-};
-
-
struct mmap_data {
int counter;
void *base;
@@ -419,8 +403,11 @@
if (call_graph)
attr->sample_type |= PERF_SAMPLE_CALLCHAIN;
- if (raw_samples)
+ if (raw_samples) {
+ attr->sample_type |= PERF_SAMPLE_TIME;
attr->sample_type |= PERF_SAMPLE_RAW;
+ attr->sample_type |= PERF_SAMPLE_CPU;
+ }
attr->mmap = track;
attr->comm = track;
@@ -563,6 +550,17 @@
else
header = perf_header__new();
+
+ if (raw_samples) {
+ read_tracing_data(attrs, nr_counters);
+ } else {
+ for (i = 0; i < nr_counters; i++) {
+ if (attrs[i].sample_type & PERF_SAMPLE_RAW) {
+ read_tracing_data(attrs, nr_counters);
+ break;
+ }
+ }
+ }
atexit(atexit_header);
if (!system_wide) {
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index b53a60f..cdf9a8d 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -17,19 +17,18 @@
#include "util/string.h"
#include "util/callchain.h"
#include "util/strlist.h"
+#include "util/values.h"
#include "perf.h"
+#include "util/debug.h"
#include "util/header.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
-#define SHOW_KERNEL 1
-#define SHOW_USER 2
-#define SHOW_HV 4
+#include "util/thread.h"
static char const *input_name = "perf.data";
-static char *vmlinux = NULL;
static char default_sort_order[] = "comm,dso,symbol";
static char *sort_order = default_sort_order;
@@ -38,21 +37,19 @@
static struct strlist *dso_list, *comm_list, *sym_list;
static char *field_sep;
+static int force;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
-static int dump_trace = 0;
-#define dprintf(x...) do { if (dump_trace) printf(x); } while (0)
-#define cdprintf(x...) do { if (dump_trace) color_fprintf(stdout, color, x); } while (0)
-
-static int verbose;
-#define eprintf(x...) do { if (verbose) fprintf(stderr, x); } while (0)
-
-static int modules;
-
static int full_paths;
static int show_nr_samples;
+static int show_threads;
+static struct perf_read_values show_threads_values;
+
+static char default_pretty_printing_style[] = "normal";
+static char *pretty_printing_style = default_pretty_printing_style;
+
static unsigned long page_size;
static unsigned long mmap_window = 32;
@@ -66,6 +63,15 @@
static int callchain;
+static char __cwd[PATH_MAX];
+static char *cwd = __cwd;
+static int cwdlen;
+
+static struct rb_root threads;
+static struct thread *last_match;
+
+static struct perf_header *header;
+
static
struct callchain_param callchain_param = {
.mode = CHAIN_GRAPH_REL,
@@ -74,59 +80,6 @@
static u64 sample_type;
-struct ip_event {
- struct perf_event_header header;
- u64 ip;
- u32 pid, tid;
- unsigned char __more_data[];
-};
-
-struct mmap_event {
- struct perf_event_header header;
- u32 pid, tid;
- u64 start;
- u64 len;
- u64 pgoff;
- char filename[PATH_MAX];
-};
-
-struct comm_event {
- struct perf_event_header header;
- u32 pid, tid;
- char comm[16];
-};
-
-struct fork_event {
- struct perf_event_header header;
- u32 pid, ppid;
- u32 tid, ptid;
-};
-
-struct lost_event {
- struct perf_event_header header;
- u64 id;
- u64 lost;
-};
-
-struct read_event {
- struct perf_event_header header;
- u32 pid,tid;
- u64 value;
- u64 time_enabled;
- u64 time_running;
- u64 id;
-};
-
-typedef union event_union {
- struct perf_event_header header;
- struct ip_event ip;
- struct mmap_event mmap;
- struct comm_event comm;
- struct fork_event fork;
- struct lost_event lost;
- struct read_event read;
-} event_t;
-
static int repsep_fprintf(FILE *fp, const char *fmt, ...)
{
int n;
@@ -140,6 +93,7 @@
n = vasprintf(&bf, fmt, ap);
if (n > 0) {
char *sep = bf;
+
while (1) {
sep = strchr(sep, *field_sep);
if (sep == NULL)
@@ -154,396 +108,10 @@
return n;
}
-static LIST_HEAD(dsos);
-static struct dso *kernel_dso;
-static struct dso *vdso;
-static struct dso *hypervisor_dso;
-
-static void dsos__add(struct dso *dso)
-{
- list_add_tail(&dso->node, &dsos);
-}
-
-static struct dso *dsos__find(const char *name)
-{
- struct dso *pos;
-
- list_for_each_entry(pos, &dsos, node)
- if (strcmp(pos->name, name) == 0)
- return pos;
- return NULL;
-}
-
-static struct dso *dsos__findnew(const char *name)
-{
- struct dso *dso = dsos__find(name);
- int nr;
-
- if (dso)
- return dso;
-
- dso = dso__new(name, 0);
- if (!dso)
- goto out_delete_dso;
-
- nr = dso__load(dso, NULL, verbose);
- if (nr < 0) {
- eprintf("Failed to open: %s\n", name);
- goto out_delete_dso;
- }
- if (!nr)
- eprintf("No symbols found in: %s, maybe install a debug package?\n", name);
-
- dsos__add(dso);
-
- return dso;
-
-out_delete_dso:
- dso__delete(dso);
- return NULL;
-}
-
-static void dsos__fprintf(FILE *fp)
-{
- struct dso *pos;
-
- list_for_each_entry(pos, &dsos, node)
- dso__fprintf(pos, fp);
-}
-
-static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
-{
- return dso__find_symbol(dso, ip);
-}
-
-static int load_kernel(void)
-{
- int err;
-
- kernel_dso = dso__new("[kernel]", 0);
- if (!kernel_dso)
- return -1;
-
- err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
- if (err <= 0) {
- dso__delete(kernel_dso);
- kernel_dso = NULL;
- } else
- dsos__add(kernel_dso);
-
- vdso = dso__new("[vdso]", 0);
- if (!vdso)
- return -1;
-
- vdso->find_symbol = vdso__find_symbol;
-
- dsos__add(vdso);
-
- hypervisor_dso = dso__new("[hypervisor]", 0);
- if (!hypervisor_dso)
- return -1;
- dsos__add(hypervisor_dso);
-
- return err;
-}
-
-static char __cwd[PATH_MAX];
-static char *cwd = __cwd;
-static int cwdlen;
-
-static int strcommon(const char *pathname)
-{
- int n = 0;
-
- while (n < cwdlen && pathname[n] == cwd[n])
- ++n;
-
- return n;
-}
-
-struct map {
- struct list_head node;
- u64 start;
- u64 end;
- u64 pgoff;
- u64 (*map_ip)(struct map *, u64);
- struct dso *dso;
-};
-
-static u64 map__map_ip(struct map *map, u64 ip)
-{
- return ip - map->start + map->pgoff;
-}
-
-static u64 vdso__map_ip(struct map *map __used, u64 ip)
-{
- return ip;
-}
-
-static inline int is_anon_memory(const char *filename)
-{
- return strcmp(filename, "//anon") == 0;
-}
-
-static struct map *map__new(struct mmap_event *event)
-{
- struct map *self = malloc(sizeof(*self));
-
- if (self != NULL) {
- const char *filename = event->filename;
- char newfilename[PATH_MAX];
- int anon;
-
- if (cwd) {
- int n = strcommon(filename);
-
- if (n == cwdlen) {
- snprintf(newfilename, sizeof(newfilename),
- ".%s", filename + n);
- filename = newfilename;
- }
- }
-
- anon = is_anon_memory(filename);
-
- if (anon) {
- snprintf(newfilename, sizeof(newfilename), "/tmp/perf-%d.map", event->pid);
- filename = newfilename;
- }
-
- self->start = event->start;
- self->end = event->start + event->len;
- self->pgoff = event->pgoff;
-
- self->dso = dsos__findnew(filename);
- if (self->dso == NULL)
- goto out_delete;
-
- if (self->dso == vdso || anon)
- self->map_ip = vdso__map_ip;
- else
- self->map_ip = map__map_ip;
- }
- return self;
-out_delete:
- free(self);
- return NULL;
-}
-
-static struct map *map__clone(struct map *self)
-{
- struct map *map = malloc(sizeof(*self));
-
- if (!map)
- return NULL;
-
- memcpy(map, self, sizeof(*self));
-
- return map;
-}
-
-static int map__overlap(struct map *l, struct map *r)
-{
- if (l->start > r->start) {
- struct map *t = l;
- l = r;
- r = t;
- }
-
- if (l->end > r->start)
- return 1;
-
- return 0;
-}
-
-static size_t map__fprintf(struct map *self, FILE *fp)
-{
- return fprintf(fp, " %Lx-%Lx %Lx %s\n",
- self->start, self->end, self->pgoff, self->dso->name);
-}
-
-
-struct thread {
- struct rb_node rb_node;
- struct list_head maps;
- pid_t pid;
- char *comm;
-};
-
-static struct thread *thread__new(pid_t pid)
-{
- struct thread *self = malloc(sizeof(*self));
-
- if (self != NULL) {
- self->pid = pid;
- self->comm = malloc(32);
- if (self->comm)
- snprintf(self->comm, 32, ":%d", self->pid);
- INIT_LIST_HEAD(&self->maps);
- }
-
- return self;
-}
-
static unsigned int dsos__col_width,
comms__col_width,
threads__col_width;
-static int thread__set_comm(struct thread *self, const char *comm)
-{
- if (self->comm)
- free(self->comm);
- self->comm = strdup(comm);
- if (!self->comm)
- return -ENOMEM;
-
- if (!col_width_list_str && !field_sep &&
- (!comm_list || strlist__has_entry(comm_list, comm))) {
- unsigned int slen = strlen(comm);
- if (slen > comms__col_width) {
- comms__col_width = slen;
- threads__col_width = slen + 6;
- }
- }
-
- return 0;
-}
-
-static size_t thread__fprintf(struct thread *self, FILE *fp)
-{
- struct map *pos;
- size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
-
- list_for_each_entry(pos, &self->maps, node)
- ret += map__fprintf(pos, fp);
-
- return ret;
-}
-
-
-static struct rb_root threads;
-static struct thread *last_match;
-
-static struct thread *threads__findnew(pid_t pid)
-{
- struct rb_node **p = &threads.rb_node;
- struct rb_node *parent = NULL;
- struct thread *th;
-
- /*
- * Font-end cache - PID lookups come in blocks,
- * so most of the time we dont have to look up
- * the full rbtree:
- */
- if (last_match && last_match->pid == pid)
- return last_match;
-
- while (*p != NULL) {
- parent = *p;
- th = rb_entry(parent, struct thread, rb_node);
-
- if (th->pid == pid) {
- last_match = th;
- return th;
- }
-
- if (pid < th->pid)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
- }
-
- th = thread__new(pid);
- if (th != NULL) {
- rb_link_node(&th->rb_node, parent, p);
- rb_insert_color(&th->rb_node, &threads);
- last_match = th;
- }
-
- return th;
-}
-
-static void thread__insert_map(struct thread *self, struct map *map)
-{
- struct map *pos, *tmp;
-
- list_for_each_entry_safe(pos, tmp, &self->maps, node) {
- if (map__overlap(pos, map)) {
- if (verbose >= 2) {
- printf("overlapping maps:\n");
- map__fprintf(map, stdout);
- map__fprintf(pos, stdout);
- }
-
- if (map->start <= pos->start && map->end > pos->start)
- pos->start = map->end;
-
- if (map->end >= pos->end && map->start < pos->end)
- pos->end = map->start;
-
- if (verbose >= 2) {
- printf("after collision:\n");
- map__fprintf(pos, stdout);
- }
-
- if (pos->start >= pos->end) {
- list_del_init(&pos->node);
- free(pos);
- }
- }
- }
-
- list_add_tail(&map->node, &self->maps);
-}
-
-static int thread__fork(struct thread *self, struct thread *parent)
-{
- struct map *map;
-
- if (self->comm)
- free(self->comm);
- self->comm = strdup(parent->comm);
- if (!self->comm)
- return -ENOMEM;
-
- list_for_each_entry(map, &parent->maps, node) {
- struct map *new = map__clone(map);
- if (!new)
- return -ENOMEM;
- thread__insert_map(self, new);
- }
-
- return 0;
-}
-
-static struct map *thread__find_map(struct thread *self, u64 ip)
-{
- struct map *pos;
-
- if (self == NULL)
- return NULL;
-
- list_for_each_entry(pos, &self->maps, node)
- if (ip >= pos->start && ip <= pos->end)
- return pos;
-
- return NULL;
-}
-
-static size_t threads__fprintf(FILE *fp)
-{
- size_t ret = 0;
- struct rb_node *nd;
-
- for (nd = rb_first(&threads); nd; nd = rb_next(nd)) {
- struct thread *pos = rb_entry(nd, struct thread, rb_node);
-
- ret += thread__fprintf(pos, fp);
- }
-
- return ret;
-}
-
/*
* histogram, sorted on item, collects counts
*/
@@ -573,7 +141,7 @@
struct sort_entry {
struct list_head list;
- char *header;
+ const char *header;
int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
@@ -757,7 +325,7 @@
static int sort__has_parent = 0;
struct sort_dimension {
- char *name;
+ const char *name;
struct sort_entry *entry;
int taken;
};
@@ -772,7 +340,7 @@
static LIST_HEAD(hist_entry__sort_list);
-static int sort_dimension__add(char *tok)
+static int sort_dimension__add(const char *tok)
{
unsigned int i;
@@ -1031,6 +599,7 @@
case CHAIN_GRAPH_REL:
ret += callchain__fprintf_graph(fp, chain,
total_samples, 1, 1);
+ case CHAIN_NONE:
default:
break;
}
@@ -1097,6 +666,34 @@
self->slen_calculated = 1;
}
+static void thread__comm_adjust(struct thread *self)
+{
+ char *comm = self->comm;
+
+ if (!col_width_list_str && !field_sep &&
+ (!comm_list || strlist__has_entry(comm_list, comm))) {
+ unsigned int slen = strlen(comm);
+
+ if (slen > comms__col_width) {
+ comms__col_width = slen;
+ threads__col_width = slen + 6;
+ }
+ }
+}
+
+static int thread__set_comm_adjust(struct thread *self, const char *comm)
+{
+ int ret = thread__set_comm(self, comm);
+
+ if (ret)
+ return ret;
+
+ thread__comm_adjust(self);
+
+ return 0;
+}
+
+
static struct symbol *
resolve_symbol(struct thread *thread, struct map **mapp,
struct dso **dsop, u64 *ipp)
@@ -1140,8 +737,8 @@
if ((long long)ip < 0)
dso = kernel_dso;
}
- dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
- dprintf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
+ dump_printf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+ dump_printf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
*ipp = ip;
if (dsop)
@@ -1397,6 +994,9 @@
size_t ret = 0;
unsigned int width;
char *col_width = col_width_list_str;
+ int raw_printing_style;
+
+ raw_printing_style = !strcmp(pretty_printing_style, "raw");
init_rem_hits();
@@ -1473,20 +1073,13 @@
free(rem_sq_bracket);
+ if (show_threads)
+ perf_read_values_display(fp, &show_threads_values,
+ raw_printing_style);
+
return ret;
}
-static void register_idle_thread(void)
-{
- struct thread *thread = threads__findnew(0);
-
- if (thread == NULL ||
- thread__set_comm(thread, "[idle]")) {
- fprintf(stderr, "problem inserting idle task.\n");
- exit(-1);
- }
-}
-
static unsigned long total = 0,
total_mmap = 0,
total_comm = 0,
@@ -1513,7 +1106,7 @@
char level;
int show = 0;
struct dso *dso = NULL;
- struct thread *thread = threads__findnew(event->ip.pid);
+ struct thread *thread;
u64 ip = event->ip.ip;
u64 period = 1;
struct map *map = NULL;
@@ -1521,12 +1114,14 @@
struct ip_callchain *chain = NULL;
int cpumode;
+ thread = threads__findnew(event->ip.pid, &threads, &last_match);
+
if (sample_type & PERF_SAMPLE_PERIOD) {
period = *(u64 *)more_data;
more_data += sizeof(u64);
}
- dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
+ dump_printf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.misc,
@@ -1539,7 +1134,7 @@
chain = (void *)more_data;
- dprintf("... chain: nr:%Lu\n", chain->nr);
+ dump_printf("... chain: nr:%Lu\n", chain->nr);
if (validate_chain(chain, event) < 0) {
eprintf("call-chain problem with event, skipping it.\n");
@@ -1548,11 +1143,11 @@
if (dump_trace) {
for (i = 0; i < chain->nr; i++)
- dprintf("..... %2d: %016Lx\n", i, chain->ips[i]);
+ dump_printf("..... %2d: %016Lx\n", i, chain->ips[i]);
}
}
- dprintf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+ dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
if (thread == NULL) {
eprintf("problem processing %d event, skipping it.\n",
@@ -1571,7 +1166,7 @@
dso = kernel_dso;
- dprintf(" ...... dso: %s\n", dso->name);
+ dump_printf(" ...... dso: %s\n", dso->name);
} else if (cpumode == PERF_EVENT_MISC_USER) {
@@ -1584,7 +1179,7 @@
dso = hypervisor_dso;
- dprintf(" ...... dso: [hypervisor]\n");
+ dump_printf(" ...... dso: [hypervisor]\n");
}
if (show & show_mask) {
@@ -1610,10 +1205,12 @@
static int
process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct thread *thread = threads__findnew(event->mmap.pid);
- struct map *map = map__new(&event->mmap);
+ struct thread *thread;
+ struct map *map = map__new(&event->mmap, cwd, cwdlen);
- dprintf("%p [%p]: PERF_EVENT_MMAP %d/%d: [%p(%p) @ %p]: %s\n",
+ thread = threads__findnew(event->mmap.pid, &threads, &last_match);
+
+ dump_printf("%p [%p]: PERF_EVENT_MMAP %d/%d: [%p(%p) @ %p]: %s\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->mmap.pid,
@@ -1624,7 +1221,7 @@
event->mmap.filename);
if (thread == NULL || map == NULL) {
- dprintf("problem processing PERF_EVENT_MMAP, skipping event.\n");
+ dump_printf("problem processing PERF_EVENT_MMAP, skipping event.\n");
return 0;
}
@@ -1637,16 +1234,18 @@
static int
process_comm_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct thread *thread = threads__findnew(event->comm.pid);
+ struct thread *thread;
- dprintf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
+ thread = threads__findnew(event->comm.pid, &threads, &last_match);
+
+ dump_printf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->comm.comm, event->comm.pid);
if (thread == NULL ||
- thread__set_comm(thread, event->comm.comm)) {
- dprintf("problem processing PERF_EVENT_COMM, skipping event.\n");
+ thread__set_comm_adjust(thread, event->comm.comm)) {
+ dump_printf("problem processing PERF_EVENT_COMM, skipping event.\n");
return -1;
}
total_comm++;
@@ -1657,10 +1256,13 @@
static int
process_task_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct thread *thread = threads__findnew(event->fork.pid);
- struct thread *parent = threads__findnew(event->fork.ppid);
+ struct thread *thread;
+ struct thread *parent;
- dprintf("%p [%p]: PERF_EVENT_%s: (%d:%d):(%d:%d)\n",
+ thread = threads__findnew(event->fork.pid, &threads, &last_match);
+ parent = threads__findnew(event->fork.ppid, &threads, &last_match);
+
+ dump_printf("%p [%p]: PERF_EVENT_%s: (%d:%d):(%d:%d)\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.type == PERF_EVENT_FORK ? "FORK" : "EXIT",
@@ -1678,7 +1280,7 @@
return 0;
if (!thread || !parent || thread__fork(thread, parent)) {
- dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
+ dump_printf("problem processing PERF_EVENT_FORK, skipping event.\n");
return -1;
}
total_fork++;
@@ -1689,7 +1291,7 @@
static int
process_lost_event(event_t *event, unsigned long offset, unsigned long head)
{
- dprintf("%p [%p]: PERF_EVENT_LOST: id:%Ld: lost:%Ld\n",
+ dump_printf("%p [%p]: PERF_EVENT_LOST: id:%Ld: lost:%Ld\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->lost.id,
@@ -1700,67 +1302,24 @@
return 0;
}
-static void trace_event(event_t *event)
-{
- unsigned char *raw_event = (void *)event;
- char *color = PERF_COLOR_BLUE;
- int i, j;
-
- if (!dump_trace)
- return;
-
- dprintf(".");
- cdprintf("\n. ... raw event: size %d bytes\n", event->header.size);
-
- for (i = 0; i < event->header.size; i++) {
- if ((i & 15) == 0) {
- dprintf(".");
- cdprintf(" %04x: ", i);
- }
-
- cdprintf(" %02x", raw_event[i]);
-
- if (((i & 15) == 15) || i == event->header.size-1) {
- cdprintf(" ");
- for (j = 0; j < 15-(i & 15); j++)
- cdprintf(" ");
- for (j = 0; j < (i & 15); j++) {
- if (isprint(raw_event[i-15+j]))
- cdprintf("%c", raw_event[i-15+j]);
- else
- cdprintf(".");
- }
- cdprintf("\n");
- }
- }
- dprintf(".\n");
-}
-
-static struct perf_header *header;
-
-static struct perf_counter_attr *perf_header__find_attr(u64 id)
-{
- int i;
-
- for (i = 0; i < header->attrs; i++) {
- struct perf_header_attr *attr = header->attr[i];
- int j;
-
- for (j = 0; j < attr->ids; j++) {
- if (attr->id[j] == id)
- return &attr->attr;
- }
- }
-
- return NULL;
-}
-
static int
process_read_event(event_t *event, unsigned long offset, unsigned long head)
{
- struct perf_counter_attr *attr = perf_header__find_attr(event->read.id);
+ struct perf_counter_attr *attr;
- dprintf("%p [%p]: PERF_EVENT_READ: %d %d %s %Lu\n",
+ attr = perf_header__find_attr(event->read.id, header);
+
+ if (show_threads) {
+ const char *name = attr ? __event_name(attr->type, attr->config)
+ : "unknown";
+ perf_read_values_add_value(&show_threads_values,
+ event->read.pid, event->read.tid,
+ event->read.id,
+ name,
+ event->read.value);
+ }
+
+ dump_printf("%p [%p]: PERF_EVENT_READ: %d %d %s %Lu\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->read.pid,
@@ -1812,34 +1371,22 @@
return 0;
}
-static u64 perf_header__sample_type(void)
-{
- u64 sample_type = 0;
- int i;
-
- for (i = 0; i < header->attrs; i++) {
- struct perf_header_attr *attr = header->attr[i];
-
- if (!sample_type)
- sample_type = attr->attr.sample_type;
- else if (sample_type != attr->attr.sample_type)
- die("non matching sample_type");
- }
-
- return sample_type;
-}
-
static int __cmd_report(void)
{
int ret, rc = EXIT_FAILURE;
unsigned long offset = 0;
unsigned long head, shift;
- struct stat stat;
+ struct stat input_stat;
+ struct thread *idle;
event_t *event;
uint32_t size;
char *buf;
- register_idle_thread();
+ idle = register_idle_thread(&threads, &last_match);
+ thread__comm_adjust(idle);
+
+ if (show_threads)
+ perf_read_values_init(&show_threads_values);
input = open(input_name, O_RDONLY);
if (input < 0) {
@@ -1850,13 +1397,18 @@
exit(-1);
}
- ret = fstat(input, &stat);
+ ret = fstat(input, &input_stat);
if (ret < 0) {
perror("failed to stat file");
exit(-1);
}
- if (!stat.st_size) {
+ if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user or root\n", input_name);
+ exit(-1);
+ }
+
+ if (!input_stat.st_size) {
fprintf(stderr, "zero-sized file, nothing to do!\n");
exit(0);
}
@@ -1864,7 +1416,7 @@
header = perf_header__read(input);
head = header->data_offset;
- sample_type = perf_header__sample_type();
+ sample_type = perf_header__sample_type(header);
if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) {
if (sort__has_parent) {
@@ -1874,7 +1426,7 @@
exit(-1);
}
if (callchain) {
- fprintf(stderr, "selected -c but no callchain data."
+ fprintf(stderr, "selected -g but no callchain data."
" Did you call perf record without"
" -g?\n");
exit(-1);
@@ -1924,12 +1476,12 @@
size = 8;
if (head + event->header.size >= page_size * mmap_window) {
- int ret;
+ int munmap_ret;
shift = page_size * (head / page_size);
- ret = munmap(buf, page_size * mmap_window);
- assert(ret == 0);
+ munmap_ret = munmap(buf, page_size * mmap_window);
+ assert(munmap_ret == 0);
offset += shift;
head -= shift;
@@ -1938,14 +1490,14 @@
size = event->header.size;
- dprintf("\n%p [%p]: event: %d\n",
+ dump_printf("\n%p [%p]: event: %d\n",
(void *)(offset + head),
(void *)(long)event->header.size,
event->header.type);
if (!size || process_event(event, offset, head) < 0) {
- dprintf("%p [%p]: skipping unknown header type: %d\n",
+ dump_printf("%p [%p]: skipping unknown header type: %d\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.type);
@@ -1968,25 +1520,25 @@
if (offset + head >= header->data_offset + header->data_size)
goto done;
- if (offset + head < (unsigned long)stat.st_size)
+ if (offset + head < (unsigned long)input_stat.st_size)
goto more;
done:
rc = EXIT_SUCCESS;
close(input);
- dprintf(" IP events: %10ld\n", total);
- dprintf(" mmap events: %10ld\n", total_mmap);
- dprintf(" comm events: %10ld\n", total_comm);
- dprintf(" fork events: %10ld\n", total_fork);
- dprintf(" lost events: %10ld\n", total_lost);
- dprintf(" unknown events: %10ld\n", total_unknown);
+ dump_printf(" IP events: %10ld\n", total);
+ dump_printf(" mmap events: %10ld\n", total_mmap);
+ dump_printf(" comm events: %10ld\n", total_comm);
+ dump_printf(" fork events: %10ld\n", total_fork);
+ dump_printf(" lost events: %10ld\n", total_lost);
+ dump_printf(" unknown events: %10ld\n", total_unknown);
if (dump_trace)
return 0;
if (verbose >= 3)
- threads__fprintf(stdout);
+ threads__fprintf(stdout, &threads);
if (verbose >= 2)
dsos__fprintf(stdout);
@@ -1995,6 +1547,9 @@
output__resort(total);
output__fprintf(stdout, total);
+ if (show_threads)
+ perf_read_values_destroy(&show_threads_values);
+
return rc;
}
@@ -2063,11 +1618,16 @@
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
- OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_STRING('k', "vmlinux", &vmlinux_name, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
OPT_BOOLEAN('m', "modules", &modules,
"load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
"Show a column with the number of samples"),
+ OPT_BOOLEAN('T', "threads", &show_threads,
+ "Show per-thread event counters"),
+ OPT_STRING(0, "pretty", &pretty_printing_style, "key",
+ "pretty printing style key: normal raw"),
OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
"sort by key(s): pid, comm, dso, symbol, parent"),
OPT_BOOLEAN('P', "full-paths", &full_paths,
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index b4b06c7..61b8282 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -42,6 +42,8 @@
#include "util/util.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
+#include "util/event.h"
+#include "util/debug.h"
#include <sys/prctl.h>
#include <math.h>
@@ -60,10 +62,7 @@
};
-#define MAX_RUN 100
-
static int system_wide = 0;
-static int verbose = 0;
static unsigned int nr_cpus = 0;
static int run_idx = 0;
@@ -75,26 +74,56 @@
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
-static u64 runtime_nsecs[MAX_RUN];
-static u64 walltime_nsecs[MAX_RUN];
-static u64 runtime_cycles[MAX_RUN];
+static int event_scaled[MAX_COUNTERS];
-static u64 event_res[MAX_RUN][MAX_COUNTERS][3];
-static u64 event_scaled[MAX_RUN][MAX_COUNTERS];
+struct stats
+{
+ double n, mean, M2;
+};
-static u64 event_res_avg[MAX_COUNTERS][3];
-static u64 event_res_noise[MAX_COUNTERS][3];
+static void update_stats(struct stats *stats, u64 val)
+{
+ double delta;
-static u64 event_scaled_avg[MAX_COUNTERS];
+ stats->n++;
+ delta = val - stats->mean;
+ stats->mean += delta / stats->n;
+ stats->M2 += delta*(val - stats->mean);
+}
-static u64 runtime_nsecs_avg;
-static u64 runtime_nsecs_noise;
+static double avg_stats(struct stats *stats)
+{
+ return stats->mean;
+}
-static u64 walltime_nsecs_avg;
-static u64 walltime_nsecs_noise;
+/*
+ * http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance
+ *
+ * (\Sum n_i^2) - ((\Sum n_i)^2)/n
+ * s^2 = -------------------------------
+ * n - 1
+ *
+ * http://en.wikipedia.org/wiki/Stddev
+ *
+ * The std dev of the mean is related to the std dev by:
+ *
+ * s
+ * s_mean = -------
+ * sqrt(n)
+ *
+ */
+static double stddev_stats(struct stats *stats)
+{
+ double variance = stats->M2 / (stats->n - 1);
+ double variance_mean = variance / stats->n;
-static u64 runtime_cycles_avg;
-static u64 runtime_cycles_noise;
+ return sqrt(variance_mean);
+}
+
+struct stats event_res_stats[MAX_COUNTERS][3];
+struct stats runtime_nsecs_stats;
+struct stats walltime_nsecs_stats;
+struct stats runtime_cycles_stats;
#define MATCH_EVENT(t, c, counter) \
(attrs[counter].type == PERF_TYPE_##t && \
@@ -149,12 +178,11 @@
*/
static void read_counter(int counter)
{
- u64 *count, single_count[3];
+ u64 count[3], single_count[3];
unsigned int cpu;
size_t res, nv;
int scaled;
-
- count = event_res[run_idx][counter];
+ int i;
count[0] = count[1] = count[2] = 0;
@@ -179,24 +207,33 @@
scaled = 0;
if (scale) {
if (count[2] == 0) {
- event_scaled[run_idx][counter] = -1;
+ event_scaled[counter] = -1;
count[0] = 0;
return;
}
if (count[2] < count[1]) {
- event_scaled[run_idx][counter] = 1;
+ event_scaled[counter] = 1;
count[0] = (unsigned long long)
((double)count[0] * count[1] / count[2] + 0.5);
}
}
+
+ for (i = 0; i < 3; i++)
+ update_stats(&event_res_stats[counter][i], count[i]);
+
+ if (verbose) {
+ fprintf(stderr, "%s: %Ld %Ld %Ld\n", event_name(counter),
+ count[0], count[1], count[2]);
+ }
+
/*
* Save the full runtime - to allow normalization during printout:
*/
if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
- runtime_nsecs[run_idx] = count[0];
+ update_stats(&runtime_nsecs_stats, count[0]);
if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
- runtime_cycles[run_idx] = count[0];
+ update_stats(&runtime_cycles_stats, count[0]);
}
static int run_perf_stat(int argc __used, const char **argv)
@@ -270,7 +307,7 @@
t1 = rdclock();
- walltime_nsecs[run_idx] = t1 - t0;
+ update_stats(&walltime_nsecs_stats, t1 - t0);
for (counter = 0; counter < nr_counters; counter++)
read_counter(counter);
@@ -278,42 +315,38 @@
return WEXITSTATUS(status);
}
-static void print_noise(u64 *count, u64 *noise)
+static void print_noise(int counter, double avg)
{
- if (run_count > 1)
- fprintf(stderr, " ( +- %7.3f%% )",
- (double)noise[0]/(count[0]+1)*100.0);
+ if (run_count == 1)
+ return;
+
+ fprintf(stderr, " ( +- %7.3f%% )",
+ 100 * stddev_stats(&event_res_stats[counter][0]) / avg);
}
-static void nsec_printout(int counter, u64 *count, u64 *noise)
+static void nsec_printout(int counter, double avg)
{
- double msecs = (double)count[0] / 1000000;
+ double msecs = avg / 1e6;
fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter));
if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
- if (walltime_nsecs_avg)
- fprintf(stderr, " # %10.3f CPUs ",
- (double)count[0] / (double)walltime_nsecs_avg);
+ fprintf(stderr, " # %10.3f CPUs ",
+ avg / avg_stats(&walltime_nsecs_stats));
}
- print_noise(count, noise);
}
-static void abs_printout(int counter, u64 *count, u64 *noise)
+static void abs_printout(int counter, double avg)
{
- fprintf(stderr, " %14Ld %-24s", count[0], event_name(counter));
+ fprintf(stderr, " %14.0f %-24s", avg, event_name(counter));
- if (runtime_cycles_avg &&
- MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
+ if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
fprintf(stderr, " # %10.3f IPC ",
- (double)count[0] / (double)runtime_cycles_avg);
+ avg / avg_stats(&runtime_cycles_stats));
} else {
- if (runtime_nsecs_avg) {
- fprintf(stderr, " # %10.3f M/sec",
- (double)count[0]/runtime_nsecs_avg*1000.0);
- }
+ fprintf(stderr, " # %10.3f M/sec",
+ 1000.0 * avg / avg_stats(&runtime_nsecs_stats));
}
- print_noise(count, noise);
}
/*
@@ -321,12 +354,8 @@
*/
static void print_counter(int counter)
{
- u64 *count, *noise;
- int scaled;
-
- count = event_res_avg[counter];
- noise = event_res_noise[counter];
- scaled = event_scaled_avg[counter];
+ double avg = avg_stats(&event_res_stats[counter][0]);
+ int scaled = event_scaled[counter];
if (scaled == -1) {
fprintf(stderr, " %14s %-24s\n",
@@ -335,110 +364,29 @@
}
if (nsec_counter(counter))
- nsec_printout(counter, count, noise);
+ nsec_printout(counter, avg);
else
- abs_printout(counter, count, noise);
+ abs_printout(counter, avg);
- if (scaled)
+ print_noise(counter, avg);
+
+ if (scaled) {
+ double avg_enabled, avg_running;
+
+ avg_enabled = avg_stats(&event_res_stats[counter][1]);
+ avg_running = avg_stats(&event_res_stats[counter][2]);
+
fprintf(stderr, " (scaled from %.2f%%)",
- (double) count[2] / count[1] * 100);
+ 100 * avg_running / avg_enabled);
+ }
fprintf(stderr, "\n");
}
-/*
- * normalize_noise noise values down to stddev:
- */
-static void normalize_noise(u64 *val)
-{
- double res;
-
- res = (double)*val / (run_count * sqrt((double)run_count));
-
- *val = (u64)res;
-}
-
-static void update_avg(const char *name, int idx, u64 *avg, u64 *val)
-{
- *avg += *val;
-
- if (verbose > 1)
- fprintf(stderr, "debug: %20s[%d]: %Ld\n", name, idx, *val);
-}
-/*
- * Calculate the averages and noises:
- */
-static void calc_avg(void)
-{
- int i, j;
-
- if (verbose > 1)
- fprintf(stderr, "\n");
-
- for (i = 0; i < run_count; i++) {
- update_avg("runtime", 0, &runtime_nsecs_avg, runtime_nsecs + i);
- update_avg("walltime", 0, &walltime_nsecs_avg, walltime_nsecs + i);
- update_avg("runtime_cycles", 0, &runtime_cycles_avg, runtime_cycles + i);
-
- for (j = 0; j < nr_counters; j++) {
- update_avg("counter/0", j,
- event_res_avg[j]+0, event_res[i][j]+0);
- update_avg("counter/1", j,
- event_res_avg[j]+1, event_res[i][j]+1);
- update_avg("counter/2", j,
- event_res_avg[j]+2, event_res[i][j]+2);
- if (event_scaled[i][j] != (u64)-1)
- update_avg("scaled", j,
- event_scaled_avg + j, event_scaled[i]+j);
- else
- event_scaled_avg[j] = -1;
- }
- }
- runtime_nsecs_avg /= run_count;
- walltime_nsecs_avg /= run_count;
- runtime_cycles_avg /= run_count;
-
- for (j = 0; j < nr_counters; j++) {
- event_res_avg[j][0] /= run_count;
- event_res_avg[j][1] /= run_count;
- event_res_avg[j][2] /= run_count;
- }
-
- for (i = 0; i < run_count; i++) {
- runtime_nsecs_noise +=
- abs((s64)(runtime_nsecs[i] - runtime_nsecs_avg));
- walltime_nsecs_noise +=
- abs((s64)(walltime_nsecs[i] - walltime_nsecs_avg));
- runtime_cycles_noise +=
- abs((s64)(runtime_cycles[i] - runtime_cycles_avg));
-
- for (j = 0; j < nr_counters; j++) {
- event_res_noise[j][0] +=
- abs((s64)(event_res[i][j][0] - event_res_avg[j][0]));
- event_res_noise[j][1] +=
- abs((s64)(event_res[i][j][1] - event_res_avg[j][1]));
- event_res_noise[j][2] +=
- abs((s64)(event_res[i][j][2] - event_res_avg[j][2]));
- }
- }
-
- normalize_noise(&runtime_nsecs_noise);
- normalize_noise(&walltime_nsecs_noise);
- normalize_noise(&runtime_cycles_noise);
-
- for (j = 0; j < nr_counters; j++) {
- normalize_noise(&event_res_noise[j][0]);
- normalize_noise(&event_res_noise[j][1]);
- normalize_noise(&event_res_noise[j][2]);
- }
-}
-
static void print_stat(int argc, const char **argv)
{
int i, counter;
- calc_avg();
-
fflush(stdout);
fprintf(stderr, "\n");
@@ -457,10 +405,11 @@
fprintf(stderr, "\n");
fprintf(stderr, " %14.9f seconds time elapsed",
- (double)walltime_nsecs_avg/1e9);
+ avg_stats(&walltime_nsecs_stats)/1e9);
if (run_count > 1) {
fprintf(stderr, " ( +- %7.3f%% )",
- 100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg);
+ 100*stddev_stats(&walltime_nsecs_stats) /
+ avg_stats(&walltime_nsecs_stats));
}
fprintf(stderr, "\n\n");
}
@@ -515,7 +464,7 @@
PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc)
usage_with_options(stat_usage, options);
- if (run_count <= 0 || run_count > MAX_RUN)
+ if (run_count <= 0)
usage_with_options(stat_usage, options);
/* Set attrs and nr_counters if no event is selected and !null_run */
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 7de28ce..4002ccb 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -27,6 +27,8 @@
#include "util/parse-options.h"
#include "util/parse-events.h"
+#include "util/debug.h"
+
#include <assert.h>
#include <fcntl.h>
@@ -68,8 +70,6 @@
static unsigned int page_size;
static unsigned int mmap_pages = 16;
static int freq = 0;
-static int verbose = 0;
-static char *vmlinux = NULL;
static int delay_secs = 2;
static int zero;
@@ -122,7 +122,8 @@
struct module *module;
struct section *section = NULL;
FILE *file;
- char command[PATH_MAX*2], *path = vmlinux;
+ char command[PATH_MAX*2];
+ const char *path = vmlinux_name;
u64 start, end, len;
if (!syme)
@@ -338,8 +339,6 @@
printf("%d lines not displayed, maybe increase display entries [e]\n", more);
}
-struct dso *kernel_dso;
-
/*
* Symbols will be added here in record_ip and will get out
* after decayed.
@@ -484,17 +483,24 @@
if (nr_counters == 1)
printf(" samples pcnt");
else
- printf(" weight samples pcnt");
+ printf(" weight samples pcnt");
- printf(" RIP kernel function\n"
- " ______ _______ _____ ________________ _______________\n\n"
- );
+ if (verbose)
+ printf(" RIP ");
+ printf(" kernel function\n");
+ printf(" %s _______ _____",
+ nr_counters == 1 ? " " : "______");
+ if (verbose)
+ printf(" ________________");
+ printf(" _______________\n\n");
for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
- struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node);
- struct symbol *sym = (struct symbol *)(syme + 1);
+ struct symbol *sym;
double pcnt;
+ syme = rb_entry(nd, struct sym_entry, rb_node);
+ sym = (struct symbol *)(syme + 1);
+
if (++printed > print_entries || (int)syme->snap_count < count_filter)
continue;
@@ -507,7 +513,9 @@
printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
percent_color_fprintf(stdout, "%4.1f%%", pcnt);
- printf(" - %016llx : %s", sym->start, sym->name);
+ if (verbose)
+ printf(" - %016llx", sym->start);
+ printf(" : %s", sym->name);
if (sym->module)
printf("\t[%s]", sym->module->name);
printf("\n");
@@ -613,7 +621,7 @@
fprintf(stdout, "\t[f] profile display filter (count). \t(%d)\n", count_filter);
- if (vmlinux) {
+ if (vmlinux_name) {
fprintf(stdout, "\t[F] annotate display filter (percent). \t(%d%%)\n", sym_pcnt_filter);
fprintf(stdout, "\t[s] annotate symbol. \t(%s)\n", name?: "NULL");
fprintf(stdout, "\t[S] stop annotation.\n");
@@ -642,7 +650,9 @@
case 'F':
case 's':
case 'S':
- return vmlinux ? 1 : 0;
+ return vmlinux_name ? 1 : 0;
+ default:
+ break;
}
return 0;
@@ -728,6 +738,8 @@
case 'z':
zero = ~zero;
break;
+ default:
+ break;
}
}
@@ -816,13 +828,13 @@
{
struct rb_node *node;
struct symbol *sym;
- int modules = vmlinux ? 1 : 0;
+ int use_modules = vmlinux_name ? 1 : 0;
kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry));
if (kernel_dso == NULL)
return -1;
- if (dso__load_kernel(kernel_dso, vmlinux, symbol_filter, verbose, modules) <= 0)
+ if (dso__load_kernel(kernel_dso, vmlinux_name, symbol_filter, verbose, use_modules) <= 0)
goto out_delete_dso;
node = rb_first(&kernel_dso->syms);
@@ -937,26 +949,6 @@
last_read = this_read;
for (; old != head;) {
- struct ip_event {
- struct perf_event_header header;
- u64 ip;
- u32 pid, target_pid;
- };
- struct mmap_event {
- struct perf_event_header header;
- u32 pid, target_pid;
- u64 start;
- u64 len;
- u64 pgoff;
- char filename[PATH_MAX];
- };
-
- typedef union event_union {
- struct perf_event_header header;
- struct ip_event ip;
- struct mmap_event mmap;
- } event_t;
-
event_t *event = (event_t *)&data[old & md->mask];
event_t event_copy;
@@ -1138,7 +1130,7 @@
"system-wide collection from all CPUs"),
OPT_INTEGER('C', "CPU", &profile_cpu,
"CPU to profile on"),
- OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_STRING('k', "vmlinux", &vmlinux_name, "file", "vmlinux pathname"),
OPT_INTEGER('m', "mmap-pages", &mmap_pages,
"number of mmap data pages"),
OPT_INTEGER('r', "realtime", &realtime_prio,
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
new file mode 100644
index 0000000..914ab36
--- /dev/null
+++ b/tools/perf/builtin-trace.c
@@ -0,0 +1,297 @@
+#include "builtin.h"
+
+#include "util/util.h"
+#include "util/cache.h"
+#include "util/symbol.h"
+#include "util/thread.h"
+#include "util/header.h"
+
+#include "util/parse-options.h"
+
+#include "perf.h"
+#include "util/debug.h"
+
+#include "util/trace-event.h"
+
+static char const *input_name = "perf.data";
+static int input;
+static unsigned long page_size;
+static unsigned long mmap_window = 32;
+
+static unsigned long total = 0;
+static unsigned long total_comm = 0;
+
+static struct rb_root threads;
+static struct thread *last_match;
+
+static struct perf_header *header;
+static u64 sample_type;
+
+
+static int
+process_comm_event(event_t *event, unsigned long offset, unsigned long head)
+{
+ struct thread *thread;
+
+ thread = threads__findnew(event->comm.pid, &threads, &last_match);
+
+ dump_printf("%p [%p]: PERF_EVENT_COMM: %s:%d\n",
+ (void *)(offset + head),
+ (void *)(long)(event->header.size),
+ event->comm.comm, event->comm.pid);
+
+ if (thread == NULL ||
+ thread__set_comm(thread, event->comm.comm)) {
+ dump_printf("problem processing PERF_EVENT_COMM, skipping event.\n");
+ return -1;
+ }
+ total_comm++;
+
+ return 0;
+}
+
+static int
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
+{
+ char level;
+ int show = 0;
+ struct dso *dso = NULL;
+ struct thread *thread;
+ u64 ip = event->ip.ip;
+ u64 timestamp = -1;
+ u32 cpu = -1;
+ u64 period = 1;
+ void *more_data = event->ip.__more_data;
+ int cpumode;
+
+ thread = threads__findnew(event->ip.pid, &threads, &last_match);
+
+ if (sample_type & PERF_SAMPLE_TIME) {
+ timestamp = *(u64 *)more_data;
+ more_data += sizeof(u64);
+ }
+
+ if (sample_type & PERF_SAMPLE_CPU) {
+ cpu = *(u32 *)more_data;
+ more_data += sizeof(u32);
+ more_data += sizeof(u32); /* reserved */
+ }
+
+ if (sample_type & PERF_SAMPLE_PERIOD) {
+ period = *(u64 *)more_data;
+ more_data += sizeof(u64);
+ }
+
+ dump_printf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
+ (void *)(offset + head),
+ (void *)(long)(event->header.size),
+ event->header.misc,
+ event->ip.pid, event->ip.tid,
+ (void *)(long)ip,
+ (long long)period);
+
+ dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
+ if (thread == NULL) {
+ eprintf("problem processing %d event, skipping it.\n",
+ event->header.type);
+ return -1;
+ }
+
+ cpumode = event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK;
+
+ if (cpumode == PERF_EVENT_MISC_KERNEL) {
+ show = SHOW_KERNEL;
+ level = 'k';
+
+ dso = kernel_dso;
+
+ dump_printf(" ...... dso: %s\n", dso->name);
+
+ } else if (cpumode == PERF_EVENT_MISC_USER) {
+
+ show = SHOW_USER;
+ level = '.';
+
+ } else {
+ show = SHOW_HV;
+ level = 'H';
+
+ dso = hypervisor_dso;
+
+ dump_printf(" ...... dso: [hypervisor]\n");
+ }
+
+ if (sample_type & PERF_SAMPLE_RAW) {
+ struct {
+ u32 size;
+ char data[0];
+ } *raw = more_data;
+
+ /*
+ * FIXME: better resolve from pid from the struct trace_entry
+ * field, although it should be the same than this perf
+ * event pid
+ */
+ print_event(cpu, raw->data, raw->size, timestamp, thread->comm);
+ }
+ total += period;
+
+ return 0;
+}
+
+static int
+process_event(event_t *event, unsigned long offset, unsigned long head)
+{
+ trace_event(event);
+
+ switch (event->header.type) {
+ case PERF_EVENT_MMAP ... PERF_EVENT_LOST:
+ return 0;
+
+ case PERF_EVENT_COMM:
+ return process_comm_event(event, offset, head);
+
+ case PERF_EVENT_EXIT ... PERF_EVENT_READ:
+ return 0;
+
+ case PERF_EVENT_SAMPLE:
+ return process_sample_event(event, offset, head);
+
+ case PERF_EVENT_MAX:
+ default:
+ return -1;
+ }
+
+ return 0;
+}
+
+static int __cmd_trace(void)
+{
+ int ret, rc = EXIT_FAILURE;
+ unsigned long offset = 0;
+ unsigned long head = 0;
+ struct stat perf_stat;
+ event_t *event;
+ uint32_t size;
+ char *buf;
+
+ trace_report();
+ register_idle_thread(&threads, &last_match);
+
+ input = open(input_name, O_RDONLY);
+ if (input < 0) {
+ perror("failed to open file");
+ exit(-1);
+ }
+
+ ret = fstat(input, &perf_stat);
+ if (ret < 0) {
+ perror("failed to stat file");
+ exit(-1);
+ }
+
+ if (!perf_stat.st_size) {
+ fprintf(stderr, "zero-sized file, nothing to do!\n");
+ exit(0);
+ }
+ header = perf_header__read(input);
+ head = header->data_offset;
+ sample_type = perf_header__sample_type(header);
+
+ if (!(sample_type & PERF_SAMPLE_RAW))
+ die("No trace sample to read. Did you call perf record "
+ "without -R?");
+
+ if (load_kernel() < 0) {
+ perror("failed to load kernel symbols");
+ return EXIT_FAILURE;
+ }
+
+remap:
+ buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
+ MAP_SHARED, input, offset);
+ if (buf == MAP_FAILED) {
+ perror("failed to mmap file");
+ exit(-1);
+ }
+
+more:
+ event = (event_t *)(buf + head);
+
+ size = event->header.size;
+ if (!size)
+ size = 8;
+
+ if (head + event->header.size >= page_size * mmap_window) {
+ unsigned long shift = page_size * (head / page_size);
+ int res;
+
+ res = munmap(buf, page_size * mmap_window);
+ assert(res == 0);
+
+ offset += shift;
+ head -= shift;
+ goto remap;
+ }
+
+ size = event->header.size;
+
+
+ if (!size || process_event(event, offset, head) < 0) {
+
+ /*
+ * assume we lost track of the stream, check alignment, and
+ * increment a single u64 in the hope to catch on again 'soon'.
+ */
+
+ if (unlikely(head & 7))
+ head &= ~7ULL;
+
+ size = 8;
+ }
+
+ head += size;
+
+ if (offset + head < (unsigned long)perf_stat.st_size)
+ goto more;
+
+ rc = EXIT_SUCCESS;
+ close(input);
+
+ return rc;
+}
+
+static const char * const annotate_usage[] = {
+ "perf trace [<options>] <command>",
+ NULL
+};
+
+static const struct option options[] = {
+ OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+ "dump raw trace in ASCII"),
+ OPT_BOOLEAN('v', "verbose", &verbose,
+ "be more verbose (show symbol address, etc)"),
+ OPT_END()
+};
+
+int cmd_trace(int argc, const char **argv, const char *prefix __used)
+{
+ symbol__init();
+ page_size = getpagesize();
+
+ argc = parse_options(argc, argv, options, annotate_usage, 0);
+ if (argc) {
+ /*
+ * Special case: if there's an argument left then assume tha
+ * it's a symbol filter:
+ */
+ if (argc > 1)
+ usage_with_options(annotate_usage, options);
+ }
+
+
+ setup_pager();
+
+ return __cmd_trace();
+}
diff --git a/tools/perf/builtin.h b/tools/perf/builtin.h
index 51d1682..3a63e41 100644
--- a/tools/perf/builtin.h
+++ b/tools/perf/builtin.h
@@ -22,5 +22,6 @@
extern int cmd_top(int argc, const char **argv, const char *prefix);
extern int cmd_version(int argc, const char **argv, const char *prefix);
extern int cmd_list(int argc, const char **argv, const char *prefix);
+extern int cmd_trace(int argc, const char **argv, const char *prefix);
#endif
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 31982ad..fe4589d 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -292,6 +292,7 @@
{ "top", cmd_top, 0 },
{ "annotate", cmd_annotate, 0 },
{ "version", cmd_version, 0 },
+ { "trace", cmd_trace, 0 },
};
unsigned int i;
static const char ext[] = STRIP_EXTENSION;
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index e5148e2..2abeb20 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -41,6 +41,12 @@
#define cpu_relax() asm volatile("" ::: "memory");
#endif
+#ifdef __sparc__
+#include "../../arch/sparc/include/asm/unistd.h"
+#define rmb() asm volatile("":::"memory")
+#define cpu_relax() asm volatile("":::"memory")
+#endif
+
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
diff --git a/tools/perf/util/abspath.c b/tools/perf/util/abspath.c
index 61d33b8..a791dd4 100644
--- a/tools/perf/util/abspath.c
+++ b/tools/perf/util/abspath.c
@@ -50,7 +50,8 @@
die ("Could not get current working directory");
if (last_elem) {
- int len = strlen(buf);
+ len = strlen(buf);
+
if (len + strlen(last_elem) + 2 > PATH_MAX)
die ("Too long path name: '%s/%s'",
buf, last_elem);
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 4b50c41..6f8ea9d 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -52,7 +52,6 @@
extern void maybe_flush_or_die(FILE *, const char *);
extern int copy_fd(int ifd, int ofd);
extern int copy_file(const char *dst, const char *src, int mode);
-extern ssize_t read_in_full(int fd, void *buf, size_t count);
extern ssize_t write_in_full(int fd, const void *buf, size_t count);
extern void write_or_die(int fd, const void *buf, size_t count);
extern int write_or_whine(int fd, const void *buf, size_t count, const char *msg);
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 0114734..3b8380f 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -50,6 +50,7 @@
else
p = &(*p)->rb_right;
break;
+ case CHAIN_NONE:
default:
break;
}
@@ -143,6 +144,7 @@
case CHAIN_FLAT:
param->sort = sort_chain_flat;
break;
+ case CHAIN_NONE:
default:
return -1;
}
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index a926ae4..43cf3ea 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -4,6 +4,7 @@
#include "../perf.h"
#include <linux/list.h>
#include <linux/rbtree.h>
+#include "util.h"
#include "symbol.h"
enum chain_mode {
diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c
index 90a044d..e88bca5 100644
--- a/tools/perf/util/color.c
+++ b/tools/perf/util/color.c
@@ -166,7 +166,7 @@
return perf_default_config(var, value, cb);
}
-static int color_vfprintf(FILE *fp, const char *color, const char *fmt,
+static int __color_vfprintf(FILE *fp, const char *color, const char *fmt,
va_list args, const char *trail)
{
int r = 0;
@@ -191,6 +191,10 @@
return r;
}
+int color_vfprintf(FILE *fp, const char *color, const char *fmt, va_list args)
+{
+ return __color_vfprintf(fp, color, fmt, args, NULL);
+}
int color_fprintf(FILE *fp, const char *color, const char *fmt, ...)
@@ -199,7 +203,7 @@
int r;
va_start(args, fmt);
- r = color_vfprintf(fp, color, fmt, args, NULL);
+ r = color_vfprintf(fp, color, fmt, args);
va_end(args);
return r;
}
@@ -209,7 +213,7 @@
va_list args;
int r;
va_start(args, fmt);
- r = color_vfprintf(fp, color, fmt, args, "\n");
+ r = __color_vfprintf(fp, color, fmt, args, "\n");
va_end(args);
return r;
}
@@ -242,9 +246,9 @@
return 0;
}
-char *get_percent_color(double percent)
+const char *get_percent_color(double percent)
{
- char *color = PERF_COLOR_NORMAL;
+ const char *color = PERF_COLOR_NORMAL;
/*
* We color high-overhead entries in red, mid-overhead
@@ -263,7 +267,7 @@
int percent_color_fprintf(FILE *fp, const char *fmt, double percent)
{
int r;
- char *color;
+ const char *color;
color = get_percent_color(percent);
r = color_fprintf(fp, color, fmt, percent);
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
index 706cec5..58d5975 100644
--- a/tools/perf/util/color.h
+++ b/tools/perf/util/color.h
@@ -32,10 +32,11 @@
int perf_config_colorbool(const char *var, const char *value, int stdout_is_tty);
void color_parse(const char *value, const char *var, char *dst);
void color_parse_mem(const char *value, int len, const char *var, char *dst);
+int color_vfprintf(FILE *fp, const char *color, const char *fmt, va_list args);
int color_fprintf(FILE *fp, const char *color, const char *fmt, ...);
int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf);
int percent_color_fprintf(FILE *fp, const char *fmt, double percent);
-char *get_percent_color(double percent);
+const char *get_percent_color(double percent);
#endif /* COLOR_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index 780df54..8784649 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -160,17 +160,18 @@
name[baselen++] = '.';
for (;;) {
- int c = get_next_char();
- if (c == '\n')
+ int ch = get_next_char();
+
+ if (ch == '\n')
return -1;
- if (c == '"')
+ if (ch == '"')
break;
- if (c == '\\') {
- c = get_next_char();
- if (c == '\n')
+ if (ch == '\\') {
+ ch = get_next_char();
+ if (ch == '\n')
return -1;
}
- name[baselen++] = c;
+ name[baselen++] = ch;
if (baselen > MAXNAME / 2)
return -1;
}
@@ -530,6 +531,8 @@
store.offset[store.seen] = ftell(config_file);
}
}
+ default:
+ break;
}
return 0;
}
@@ -619,6 +622,7 @@
switch (contents[offset]) {
case '=': equal_offset = offset; break;
case ']': bracket_offset = offset; break;
+ default: break;
}
if (offset > 0 && contents[offset-1] == '\\') {
offset_ = offset;
@@ -742,9 +746,9 @@
goto write_err_out;
} else {
struct stat st;
- char* contents;
+ char *contents;
ssize_t contents_sz, copy_begin, copy_end;
- int i, new_line = 0;
+ int new_line = 0;
if (value_regex == NULL)
store.value_regex = NULL;
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
new file mode 100644
index 0000000..e8ca98f
--- /dev/null
+++ b/tools/perf/util/debug.c
@@ -0,0 +1,95 @@
+/* For general debugging purposes */
+
+#include "../perf.h"
+
+#include <string.h>
+#include <stdarg.h>
+#include <stdio.h>
+
+#include "color.h"
+#include "event.h"
+#include "debug.h"
+
+int verbose = 0;
+int dump_trace = 0;
+
+int eprintf(const char *fmt, ...)
+{
+ va_list args;
+ int ret = 0;
+
+ if (verbose) {
+ va_start(args, fmt);
+ ret = vfprintf(stderr, fmt, args);
+ va_end(args);
+ }
+
+ return ret;
+}
+
+int dump_printf(const char *fmt, ...)
+{
+ va_list args;
+ int ret = 0;
+
+ if (dump_trace) {
+ va_start(args, fmt);
+ ret = vprintf(fmt, args);
+ va_end(args);
+ }
+
+ return ret;
+}
+
+static int dump_printf_color(const char *fmt, const char *color, ...)
+{
+ va_list args;
+ int ret = 0;
+
+ if (dump_trace) {
+ va_start(args, color);
+ ret = color_vfprintf(stdout, color, fmt, args);
+ va_end(args);
+ }
+
+ return ret;
+}
+
+
+void trace_event(event_t *event)
+{
+ unsigned char *raw_event = (void *)event;
+ const char *color = PERF_COLOR_BLUE;
+ int i, j;
+
+ if (!dump_trace)
+ return;
+
+ dump_printf(".");
+ dump_printf_color("\n. ... raw event: size %d bytes\n", color,
+ event->header.size);
+
+ for (i = 0; i < event->header.size; i++) {
+ if ((i & 15) == 0) {
+ dump_printf(".");
+ dump_printf_color(" %04x: ", color, i);
+ }
+
+ dump_printf_color(" %02x", color, raw_event[i]);
+
+ if (((i & 15) == 15) || i == event->header.size-1) {
+ dump_printf_color(" ", color);
+ for (j = 0; j < 15-(i & 15); j++)
+ dump_printf_color(" ", color);
+ for (j = 0; j < (i & 15); j++) {
+ if (isprint(raw_event[i-15+j]))
+ dump_printf_color("%c", color,
+ raw_event[i-15+j]);
+ else
+ dump_printf_color(".", color);
+ }
+ dump_printf_color("\n", color);
+ }
+ }
+ dump_printf(".\n");
+}
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
new file mode 100644
index 0000000..437eea5
--- /dev/null
+++ b/tools/perf/util/debug.h
@@ -0,0 +1,8 @@
+/* For debugging general purposes */
+
+extern int verbose;
+extern int dump_trace;
+
+int eprintf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+int dump_printf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+void trace_event(event_t *event);
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
new file mode 100644
index 0000000..fa2d4e9
--- /dev/null
+++ b/tools/perf/util/event.h
@@ -0,0 +1,96 @@
+#ifndef __PERF_EVENT_H
+#define __PERF_EVENT_H
+#include "../perf.h"
+#include "util.h"
+#include <linux/list.h>
+
+enum {
+ SHOW_KERNEL = 1,
+ SHOW_USER = 2,
+ SHOW_HV = 4,
+};
+
+/*
+ * PERF_SAMPLE_IP | PERF_SAMPLE_TID | *
+ */
+struct ip_event {
+ struct perf_event_header header;
+ u64 ip;
+ u32 pid, tid;
+ unsigned char __more_data[];
+};
+
+struct mmap_event {
+ struct perf_event_header header;
+ u32 pid, tid;
+ u64 start;
+ u64 len;
+ u64 pgoff;
+ char filename[PATH_MAX];
+};
+
+struct comm_event {
+ struct perf_event_header header;
+ u32 pid, tid;
+ char comm[16];
+};
+
+struct fork_event {
+ struct perf_event_header header;
+ u32 pid, ppid;
+ u32 tid, ptid;
+};
+
+struct lost_event {
+ struct perf_event_header header;
+ u64 id;
+ u64 lost;
+};
+
+/*
+ * PERF_FORMAT_ENABLED | PERF_FORMAT_RUNNING | PERF_FORMAT_ID
+ */
+struct read_event {
+ struct perf_event_header header;
+ u32 pid,tid;
+ u64 value;
+ u64 time_enabled;
+ u64 time_running;
+ u64 id;
+};
+
+typedef union event_union {
+ struct perf_event_header header;
+ struct ip_event ip;
+ struct mmap_event mmap;
+ struct comm_event comm;
+ struct fork_event fork;
+ struct lost_event lost;
+ struct read_event read;
+} event_t;
+
+struct map {
+ struct list_head node;
+ u64 start;
+ u64 end;
+ u64 pgoff;
+ u64 (*map_ip)(struct map *, u64);
+ struct dso *dso;
+};
+
+static inline u64 map__map_ip(struct map *map, u64 ip)
+{
+ return ip - map->start + map->pgoff;
+}
+
+static inline u64 vdso__map_ip(struct map *map __used, u64 ip)
+{
+ return ip;
+}
+
+struct map *map__new(struct mmap_event *event, char *cwd, int cwdlen);
+struct map *map__clone(struct map *self);
+int map__overlap(struct map *l, struct map *r);
+size_t map__fprintf(struct map *self, FILE *fp);
+
+#endif
diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c
index 34a3528..2745605 100644
--- a/tools/perf/util/exec_cmd.c
+++ b/tools/perf/util/exec_cmd.c
@@ -6,7 +6,6 @@
#define MAX_ARGS 32
-extern char **environ;
static const char *argv_exec_path;
static const char *argv0_path;
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index b92a457..ec4d4c2 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -237,9 +237,44 @@
self->data_offset = f_header.data.offset;
self->data_size = f_header.data.size;
- lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+ lseek(fd, self->data_offset, SEEK_SET);
self->frozen = 1;
return self;
}
+
+u64 perf_header__sample_type(struct perf_header *header)
+{
+ u64 type = 0;
+ int i;
+
+ for (i = 0; i < header->attrs; i++) {
+ struct perf_header_attr *attr = header->attr[i];
+
+ if (!type)
+ type = attr->attr.sample_type;
+ else if (type != attr->attr.sample_type)
+ die("non matching sample_type");
+ }
+
+ return type;
+}
+
+struct perf_counter_attr *
+perf_header__find_attr(u64 id, struct perf_header *header)
+{
+ int i;
+
+ for (i = 0; i < header->attrs; i++) {
+ struct perf_header_attr *attr = header->attr[i];
+ int j;
+
+ for (j = 0; j < attr->ids; j++) {
+ if (attr->id[j] == id)
+ return &attr->attr;
+ }
+ }
+
+ return NULL;
+}
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index bf28044..5d0a72e 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -31,6 +31,10 @@
perf_header_attr__new(struct perf_counter_attr *attr);
void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
+u64 perf_header__sample_type(struct perf_header *header);
+struct perf_counter_attr *
+perf_header__find_attr(u64 id, struct perf_header *header);
+
struct perf_header *perf_header__new(void);
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
new file mode 100644
index 0000000..804e023
--- /dev/null
+++ b/tools/perf/util/map.c
@@ -0,0 +1,97 @@
+#include "event.h"
+#include "symbol.h"
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+static inline int is_anon_memory(const char *filename)
+{
+ return strcmp(filename, "//anon") == 0;
+}
+
+static int strcommon(const char *pathname, char *cwd, int cwdlen)
+{
+ int n = 0;
+
+ while (n < cwdlen && pathname[n] == cwd[n])
+ ++n;
+
+ return n;
+}
+
+ struct map *map__new(struct mmap_event *event, char *cwd, int cwdlen)
+{
+ struct map *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ const char *filename = event->filename;
+ char newfilename[PATH_MAX];
+ int anon;
+
+ if (cwd) {
+ int n = strcommon(filename, cwd, cwdlen);
+
+ if (n == cwdlen) {
+ snprintf(newfilename, sizeof(newfilename),
+ ".%s", filename + n);
+ filename = newfilename;
+ }
+ }
+
+ anon = is_anon_memory(filename);
+
+ if (anon) {
+ snprintf(newfilename, sizeof(newfilename), "/tmp/perf-%d.map", event->pid);
+ filename = newfilename;
+ }
+
+ self->start = event->start;
+ self->end = event->start + event->len;
+ self->pgoff = event->pgoff;
+
+ self->dso = dsos__findnew(filename);
+ if (self->dso == NULL)
+ goto out_delete;
+
+ if (self->dso == vdso || anon)
+ self->map_ip = vdso__map_ip;
+ else
+ self->map_ip = map__map_ip;
+ }
+ return self;
+out_delete:
+ free(self);
+ return NULL;
+}
+
+struct map *map__clone(struct map *self)
+{
+ struct map *map = malloc(sizeof(*self));
+
+ if (!map)
+ return NULL;
+
+ memcpy(map, self, sizeof(*self));
+
+ return map;
+}
+
+int map__overlap(struct map *l, struct map *r)
+{
+ if (l->start > r->start) {
+ struct map *t = l;
+ l = r;
+ r = t;
+ }
+
+ if (l->end > r->start)
+ return 1;
+
+ return 0;
+}
+
+size_t map__fprintf(struct map *self, FILE *fp)
+{
+ return fprintf(fp, " %Lx-%Lx %Lx %s\n",
+ self->start, self->end, self->pgoff, self->dso->name);
+}
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
index ddabe92..3d567fe 100644
--- a/tools/perf/util/module.c
+++ b/tools/perf/util/module.c
@@ -436,9 +436,9 @@
goto out_failure;
while (!feof(file)) {
- char *path, *name, *tmp;
+ char *name, *tmp;
struct module *module;
- int line_len, len;
+ int line_len;
line_len = getline(&line, &n, file);
if (line_len < 0)
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 0441784..a587d41 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1,23 +1,21 @@
-#include "../perf.h"
#include "util.h"
+#include "../perf.h"
#include "parse-options.h"
#include "parse-events.h"
#include "exec_cmd.h"
#include "string.h"
#include "cache.h"
-extern char *strcasestr(const char *haystack, const char *needle);
-
int nr_counters;
struct perf_counter_attr attrs[MAX_COUNTERS];
struct event_symbol {
- u8 type;
- u64 config;
- char *symbol;
- char *alias;
+ u8 type;
+ u64 config;
+ const char *symbol;
+ const char *alias;
};
char debugfs_path[MAXPATHLEN];
@@ -51,7 +49,7 @@
#define PERF_COUNTER_TYPE(config) __PERF_COUNTER_FIELD(config, TYPE)
#define PERF_COUNTER_ID(config) __PERF_COUNTER_FIELD(config, EVENT)
-static char *hw_event_names[] = {
+static const char *hw_event_names[] = {
"cycles",
"instructions",
"cache-references",
@@ -61,7 +59,7 @@
"bus-cycles",
};
-static char *sw_event_names[] = {
+static const char *sw_event_names[] = {
"cpu-clock-msecs",
"task-clock-msecs",
"page-faults",
@@ -73,7 +71,7 @@
#define MAX_ALIASES 8
-static char *hw_cache[][MAX_ALIASES] = {
+static const char *hw_cache[][MAX_ALIASES] = {
{ "L1-dcache", "l1-d", "l1d", "L1-data", },
{ "L1-icache", "l1-i", "l1i", "L1-instruction", },
{ "LLC", "L2" },
@@ -82,13 +80,13 @@
{ "branch", "branches", "bpu", "btb", "bpc", },
};
-static char *hw_cache_op[][MAX_ALIASES] = {
+static const char *hw_cache_op[][MAX_ALIASES] = {
{ "load", "loads", "read", },
{ "store", "stores", "write", },
{ "prefetch", "prefetches", "speculative-read", "speculative-load", },
};
-static char *hw_cache_result[][MAX_ALIASES] = {
+static const char *hw_cache_result[][MAX_ALIASES] = {
{ "refs", "Reference", "ops", "access", },
{ "misses", "miss", },
};
@@ -113,11 +111,9 @@
[C(BPU)] = (CACHE_READ),
};
-#define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st) \
+#define for_each_subsystem(sys_dir, sys_dirent, sys_next) \
while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next) \
- if (snprintf(file, MAXPATHLEN, "%s/%s", debugfs_path, \
- sys_dirent.d_name) && \
- (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \
+ if (sys_dirent.d_type == DT_DIR && \
(strcmp(sys_dirent.d_name, ".")) && \
(strcmp(sys_dirent.d_name, "..")))
@@ -136,11 +132,9 @@
return 0;
}
-#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st) \
+#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) \
while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next) \
- if (snprintf(file, MAXPATHLEN, "%s/%s/%s", debugfs_path, \
- sys_dirent.d_name, evt_dirent.d_name) && \
- (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \
+ if (evt_dirent.d_type == DT_DIR && \
(strcmp(evt_dirent.d_name, ".")) && \
(strcmp(evt_dirent.d_name, "..")) && \
(!tp_event_has_id(&sys_dirent, &evt_dirent)))
@@ -158,34 +152,39 @@
return 0;
}
-static char *tracepoint_id_to_name(u64 config)
+struct tracepoint_path *tracepoint_id_to_path(u64 config)
{
- static char tracepoint_name[2 * MAX_EVENT_LENGTH];
+ struct tracepoint_path *path = NULL;
DIR *sys_dir, *evt_dir;
struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
- struct stat st;
char id_buf[4];
- int fd;
+ int sys_dir_fd, fd;
u64 id;
char evt_path[MAXPATHLEN];
if (valid_debugfs_mount(debugfs_path))
- return "unkown";
+ return NULL;
sys_dir = opendir(debugfs_path);
if (!sys_dir)
goto cleanup;
+ sys_dir_fd = dirfd(sys_dir);
- for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
- evt_dir = opendir(evt_path);
- if (!evt_dir)
- goto cleanup;
- for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
- evt_path, st) {
- snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id",
- debugfs_path, sys_dirent.d_name,
+ for_each_subsystem(sys_dir, sys_dirent, sys_next) {
+ int dfd = openat(sys_dir_fd, sys_dirent.d_name,
+ O_RDONLY|O_DIRECTORY), evt_dir_fd;
+ if (dfd == -1)
+ continue;
+ evt_dir = fdopendir(dfd);
+ if (!evt_dir) {
+ close(dfd);
+ continue;
+ }
+ evt_dir_fd = dirfd(evt_dir);
+ for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
+ snprintf(evt_path, MAXPATHLEN, "%s/id",
evt_dirent.d_name);
- fd = open(evt_path, O_RDONLY);
+ fd = openat(evt_dir_fd, evt_path, O_RDONLY);
if (fd < 0)
continue;
if (read(fd, id_buf, sizeof(id_buf)) < 0) {
@@ -197,10 +196,23 @@
if (id == config) {
closedir(evt_dir);
closedir(sys_dir);
- snprintf(tracepoint_name, 2 * MAX_EVENT_LENGTH,
- "%s:%s", sys_dirent.d_name,
- evt_dirent.d_name);
- return tracepoint_name;
+ path = calloc(1, sizeof(path));
+ path->system = malloc(MAX_EVENT_LENGTH);
+ if (!path->system) {
+ free(path);
+ return NULL;
+ }
+ path->name = malloc(MAX_EVENT_LENGTH);
+ if (!path->name) {
+ free(path->system);
+ free(path);
+ return NULL;
+ }
+ strncpy(path->system, sys_dirent.d_name,
+ MAX_EVENT_LENGTH);
+ strncpy(path->name, evt_dirent.d_name,
+ MAX_EVENT_LENGTH);
+ return path;
}
}
closedir(evt_dir);
@@ -208,7 +220,25 @@
cleanup:
closedir(sys_dir);
- return "unkown";
+ return NULL;
+}
+
+#define TP_PATH_LEN (MAX_EVENT_LENGTH * 2 + 1)
+static const char *tracepoint_id_to_name(u64 config)
+{
+ static char buf[TP_PATH_LEN];
+ struct tracepoint_path *path;
+
+ path = tracepoint_id_to_path(config);
+ if (path) {
+ snprintf(buf, TP_PATH_LEN, "%s:%s", path->system, path->name);
+ free(path->name);
+ free(path->system);
+ free(path);
+ } else
+ snprintf(buf, TP_PATH_LEN, "%s:%s", "unknown", "unknown");
+
+ return buf;
}
static int is_cache_op_valid(u8 cache_type, u8 cache_op)
@@ -235,7 +265,7 @@
return name;
}
-char *event_name(int counter)
+const char *event_name(int counter)
{
u64 config = attrs[counter].config;
int type = attrs[counter].type;
@@ -243,7 +273,7 @@
return __event_name(type, config);
}
-char *__event_name(int type, u64 config)
+const char *__event_name(int type, u64 config)
{
static char buf[32];
@@ -294,7 +324,7 @@
return "unknown";
}
-static int parse_aliases(const char **str, char *names[][MAX_ALIASES], int size)
+static int parse_aliases(const char **str, const char *names[][MAX_ALIASES], int size)
{
int i, j;
int n, longest = -1;
@@ -598,7 +628,7 @@
{
DIR *sys_dir, *evt_dir;
struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
- struct stat st;
+ int sys_dir_fd;
char evt_path[MAXPATHLEN];
if (valid_debugfs_mount(debugfs_path))
@@ -607,16 +637,23 @@
sys_dir = opendir(debugfs_path);
if (!sys_dir)
goto cleanup;
+ sys_dir_fd = dirfd(sys_dir);
- for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
- evt_dir = opendir(evt_path);
- if (!evt_dir)
- goto cleanup;
- for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
- evt_path, st) {
+ for_each_subsystem(sys_dir, sys_dirent, sys_next) {
+ int dfd = openat(sys_dir_fd, sys_dirent.d_name,
+ O_RDONLY|O_DIRECTORY), evt_dir_fd;
+ if (dfd == -1)
+ continue;
+ evt_dir = fdopendir(dfd);
+ if (!evt_dir) {
+ close(dfd);
+ continue;
+ }
+ evt_dir_fd = dirfd(evt_dir);
+ for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
snprintf(evt_path, MAXPATHLEN, "%s:%s",
sys_dirent.d_name, evt_dirent.d_name);
- fprintf(stderr, " %-40s [%s]\n", evt_path,
+ fprintf(stderr, " %-42s [%s]\n", evt_path,
event_type_descriptors[PERF_TYPE_TRACEPOINT+1]);
}
closedir(evt_dir);
@@ -650,7 +687,7 @@
sprintf(name, "%s OR %s", syms->symbol, syms->alias);
else
strcpy(name, syms->symbol);
- fprintf(stderr, " %-40s [%s]\n", name,
+ fprintf(stderr, " %-42s [%s]\n", name,
event_type_descriptors[type]);
prev_type = type;
@@ -664,7 +701,7 @@
continue;
for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
- fprintf(stderr, " %-40s [%s]\n",
+ fprintf(stderr, " %-42s [%s]\n",
event_cache_name(type, op, i),
event_type_descriptors[4]);
}
@@ -672,7 +709,7 @@
}
fprintf(stderr, "\n");
- fprintf(stderr, " %-40s [raw hardware event descriptor]\n",
+ fprintf(stderr, " %-42s [raw hardware event descriptor]\n",
"rNNN");
fprintf(stderr, "\n");
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index 192a962..60704c1 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -1,16 +1,25 @@
-
+#ifndef _PARSE_EVENTS_H
+#define _PARSE_EVENTS_H
/*
* Parse symbolic events/counts passed in as options:
*/
struct option;
+struct tracepoint_path {
+ char *system;
+ char *name;
+ struct tracepoint_path *next;
+};
+
+extern struct tracepoint_path *tracepoint_id_to_path(u64 config);
+
extern int nr_counters;
extern struct perf_counter_attr attrs[MAX_COUNTERS];
-extern char *event_name(int ctr);
-extern char *__event_name(int type, u64 config);
+extern const char *event_name(int ctr);
+extern const char *__event_name(int type, u64 config);
extern int parse_events(const struct option *opt, const char *str, int unset);
@@ -21,3 +30,5 @@
extern char debugfs_path[];
extern int valid_debugfs_mount(const char *debugfs);
+
+#endif /* _PARSE_EVENTS_H */
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index 1bf6719..6d8af48 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -53,6 +53,12 @@
case OPTION_SET_INT:
case OPTION_SET_PTR:
return opterror(opt, "takes no value", flags);
+ case OPTION_END:
+ case OPTION_ARGUMENT:
+ case OPTION_GROUP:
+ case OPTION_STRING:
+ case OPTION_INTEGER:
+ case OPTION_LONG:
default:
break;
}
@@ -130,6 +136,9 @@
return opterror(opt, "expects a numerical value", flags);
return 0;
+ case OPTION_END:
+ case OPTION_ARGUMENT:
+ case OPTION_GROUP:
default:
die("should not happen, someone must be hit on the forehead");
}
@@ -296,6 +305,8 @@
return parse_options_usage(usagestr, options);
case -2:
goto unknown;
+ default:
+ break;
}
if (ctx->opt)
check_typos(arg + 1, options);
@@ -314,6 +325,8 @@
ctx->argv[0] = strdup(ctx->opt - 1);
*(char *)ctx->argv[0] = '-';
goto unknown;
+ default:
+ break;
}
}
continue;
@@ -336,6 +349,8 @@
return parse_options_usage(usagestr, options);
case -2:
goto unknown;
+ default:
+ break;
}
continue;
unknown:
@@ -456,6 +471,13 @@
}
break;
default: /* OPTION_{BIT,BOOLEAN,SET_INT,SET_PTR} */
+ case OPTION_END:
+ case OPTION_GROUP:
+ case OPTION_BIT:
+ case OPTION_BOOLEAN:
+ case OPTION_SET_INT:
+ case OPTION_SET_PTR:
+ case OPTION_LONG:
break;
}
diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c
index a501a40..fd1f2fa 100644
--- a/tools/perf/util/path.c
+++ b/tools/perf/util/path.c
@@ -17,7 +17,7 @@
* Two hacks:
*/
-static char *get_perf_dir(void)
+static const char *get_perf_dir(void)
{
return ".";
}
@@ -38,8 +38,9 @@
static char *get_pathname(void)
{
static char pathname_array[4][PATH_MAX];
- static int index;
- return pathname_array[3 & ++index];
+ static int idx;
+
+ return pathname_array[3 & ++idx];
}
static char *cleanup_path(char *path)
@@ -161,20 +162,24 @@
}
-const char *make_relative_path(const char *abs, const char *base)
+const char *make_relative_path(const char *abs_path, const char *base)
{
static char buf[PATH_MAX + 1];
int baselen;
+
if (!base)
- return abs;
+ return abs_path;
+
baselen = strlen(base);
- if (prefixcmp(abs, base))
- return abs;
- if (abs[baselen] == '/')
+ if (prefixcmp(abs_path, base))
+ return abs_path;
+ if (abs_path[baselen] == '/')
baselen++;
else if (base[baselen - 1] != '/')
- return abs;
- strcpy(buf, abs + baselen);
+ return abs_path;
+
+ strcpy(buf, abs_path + baselen);
+
return buf;
}
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
index a393534..2b615ac 100644
--- a/tools/perf/util/run-command.c
+++ b/tools/perf/util/run-command.c
@@ -262,7 +262,7 @@
{
struct child_process hook;
const char **argv = NULL, *env[2];
- char index[PATH_MAX];
+ char idx[PATH_MAX];
va_list args;
int ret;
size_t i = 0, alloc = 0;
@@ -284,8 +284,8 @@
hook.no_stdin = 1;
hook.stdout_to_stderr = 1;
if (index_file) {
- snprintf(index, sizeof(index), "PERF_INDEX_FILE=%s", index_file);
- env[0] = index;
+ snprintf(idx, sizeof(idx), "PERF_INDEX_FILE=%s", index_file);
+ env[0] = idx;
env[1] = NULL;
hook.env = env;
}
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 5c0f42e..fd3d9c8 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -3,6 +3,8 @@
#include "string.h"
#include "symbol.h"
+#include "debug.h"
+
#include <libelf.h>
#include <gelf.h>
#include <elf.h>
@@ -21,7 +23,7 @@
static struct symbol *symbol__new(u64 start, u64 len,
const char *name, unsigned int priv_size,
- u64 obj_start, int verbose)
+ u64 obj_start, int v)
{
size_t namelen = strlen(name) + 1;
struct symbol *self = calloc(1, priv_size + sizeof(*self) + namelen);
@@ -29,7 +31,7 @@
if (!self)
return NULL;
- if (verbose >= 2)
+ if (v >= 2)
printf("new symbol: %016Lx [%08lx]: %s, hist: %p, obj_start: %p\n",
(u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start);
@@ -156,7 +158,7 @@
return ret;
}
-static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int verbose)
+static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int v)
{
struct rb_node *nd, *prevnd;
char *line = NULL;
@@ -198,7 +200,7 @@
* Well fix up the end later, when we have all sorted.
*/
sym = symbol__new(start, 0xdead, line + len + 2,
- self->sym_priv_size, 0, verbose);
+ self->sym_priv_size, 0, v);
if (sym == NULL)
goto out_delete_line;
@@ -239,7 +241,7 @@
return -1;
}
-static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int verbose)
+static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int v)
{
char *line = NULL;
size_t n;
@@ -277,7 +279,7 @@
continue;
sym = symbol__new(start, size, line + len,
- self->sym_priv_size, start, verbose);
+ self->sym_priv_size, start, v);
if (sym == NULL)
goto out_delete_line;
@@ -305,13 +307,13 @@
* elf_symtab__for_each_symbol - iterate thru all the symbols
*
* @self: struct elf_symtab instance to iterate
- * @index: uint32_t index
+ * @idx: uint32_t idx
* @sym: GElf_Sym iterator
*/
-#define elf_symtab__for_each_symbol(syms, nr_syms, index, sym) \
- for (index = 0, gelf_getsym(syms, index, &sym);\
- index < nr_syms; \
- index++, gelf_getsym(syms, index, &sym))
+#define elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) \
+ for (idx = 0, gelf_getsym(syms, idx, &sym);\
+ idx < nr_syms; \
+ idx++, gelf_getsym(syms, idx, &sym))
static inline uint8_t elf_sym__type(const GElf_Sym *sym)
{
@@ -354,7 +356,7 @@
static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
GElf_Shdr *shp, const char *name,
- size_t *index)
+ size_t *idx)
{
Elf_Scn *sec = NULL;
size_t cnt = 1;
@@ -365,8 +367,8 @@
gelf_getshdr(sec, shp);
str = elf_strptr(elf, ep->e_shstrndx, shp->sh_name);
if (!strcmp(name, str)) {
- if (index)
- *index = cnt;
+ if (idx)
+ *idx = cnt;
break;
}
++cnt;
@@ -392,7 +394,7 @@
* And always look at the original dso, not at debuginfo packages, that
* have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
*/
-static int dso__synthesize_plt_symbols(struct dso *self, int verbose)
+static int dso__synthesize_plt_symbols(struct dso *self, int v)
{
uint32_t nr_rel_entries, idx;
GElf_Sym sym;
@@ -442,7 +444,7 @@
goto out_elf_end;
/*
- * Fetch the relocation section to find the indexes to the GOT
+ * Fetch the relocation section to find the idxes to the GOT
* and the symbols in the .dynsym they refer to.
*/
reldata = elf_getdata(scn_plt_rel, NULL);
@@ -476,7 +478,7 @@
"%s@plt", elf_sym__name(&sym, symstrs));
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
- sympltname, self->sym_priv_size, 0, verbose);
+ sympltname, self->sym_priv_size, 0, v);
if (!f)
goto out_elf_end;
@@ -494,7 +496,7 @@
"%s@plt", elf_sym__name(&sym, symstrs));
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
- sympltname, self->sym_priv_size, 0, verbose);
+ sympltname, self->sym_priv_size, 0, v);
if (!f)
goto out_elf_end;
@@ -518,12 +520,12 @@
}
static int dso__load_sym(struct dso *self, int fd, const char *name,
- symbol_filter_t filter, int verbose, struct module *mod)
+ symbol_filter_t filter, int v, struct module *mod)
{
Elf_Data *symstrs, *secstrs;
uint32_t nr_syms;
int err = -1;
- uint32_t index;
+ uint32_t idx;
GElf_Ehdr ehdr;
GElf_Shdr shdr;
Elf_Data *syms;
@@ -534,14 +536,14 @@
elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
- if (verbose)
+ if (v)
fprintf(stderr, "%s: cannot read %s ELF file.\n",
__func__, name);
goto out_close;
}
if (gelf_getehdr(elf, &ehdr) == NULL) {
- if (verbose)
+ if (v)
fprintf(stderr, "%s: cannot get elf header.\n", __func__);
goto out_elf_end;
}
@@ -583,9 +585,9 @@
NULL) != NULL);
} else self->adjust_symbols = 0;
- elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
+ elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) {
struct symbol *f;
- const char *name;
+ const char *elf_name;
char *demangled;
u64 obj_start;
struct section *section = NULL;
@@ -608,7 +610,7 @@
obj_start = sym.st_value;
if (self->adjust_symbols) {
- if (verbose >= 2)
+ if (v >= 2)
printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n",
(u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset);
@@ -630,13 +632,13 @@
* DWARF DW_compile_unit has this, but we don't always have access
* to it...
*/
- name = elf_sym__name(&sym, symstrs);
- demangled = bfd_demangle(NULL, name, DMGL_PARAMS | DMGL_ANSI);
+ elf_name = elf_sym__name(&sym, symstrs);
+ demangled = bfd_demangle(NULL, elf_name, DMGL_PARAMS | DMGL_ANSI);
if (demangled != NULL)
- name = demangled;
+ elf_name = demangled;
- f = symbol__new(sym.st_value, sym.st_size, name,
- self->sym_priv_size, obj_start, verbose);
+ f = symbol__new(sym.st_value, sym.st_size, elf_name,
+ self->sym_priv_size, obj_start, v);
free(demangled);
if (!f)
goto out_elf_end;
@@ -659,7 +661,7 @@
#define BUILD_ID_SIZE 128
-static char *dso__read_build_id(struct dso *self, int verbose)
+static char *dso__read_build_id(struct dso *self, int v)
{
int i;
GElf_Ehdr ehdr;
@@ -676,14 +678,14 @@
elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
- if (verbose)
+ if (v)
fprintf(stderr, "%s: cannot read %s ELF file.\n",
__func__, self->name);
goto out_close;
}
if (gelf_getehdr(elf, &ehdr) == NULL) {
- if (verbose)
+ if (v)
fprintf(stderr, "%s: cannot get elf header.\n", __func__);
goto out_elf_end;
}
@@ -706,7 +708,7 @@
++raw;
bid += 2;
}
- if (verbose >= 2)
+ if (v >= 2)
printf("%s(%s): %s\n", __func__, self->name, build_id);
out_elf_end:
elf_end(elf);
@@ -732,7 +734,7 @@
return origin[self->origin];
}
-int dso__load(struct dso *self, symbol_filter_t filter, int verbose)
+int dso__load(struct dso *self, symbol_filter_t filter, int v)
{
int size = PATH_MAX;
char *name = malloc(size), *build_id = NULL;
@@ -745,7 +747,7 @@
self->adjust_symbols = 0;
if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
- ret = dso__load_perf_map(self, filter, verbose);
+ ret = dso__load_perf_map(self, filter, v);
self->origin = ret > 0 ? DSO__ORIG_JAVA_JIT :
DSO__ORIG_NOT_FOUND;
return ret;
@@ -764,7 +766,7 @@
snprintf(name, size, "/usr/lib/debug%s", self->name);
break;
case DSO__ORIG_BUILDID:
- build_id = dso__read_build_id(self, verbose);
+ build_id = dso__read_build_id(self, v);
if (build_id != NULL) {
snprintf(name, size,
"/usr/lib/debug/.build-id/%.2s/%s.debug",
@@ -785,7 +787,7 @@
fd = open(name, O_RDONLY);
} while (fd < 0);
- ret = dso__load_sym(self, fd, name, filter, verbose, NULL);
+ ret = dso__load_sym(self, fd, name, filter, v, NULL);
close(fd);
/*
@@ -795,7 +797,7 @@
goto more;
if (ret > 0) {
- int nr_plt = dso__synthesize_plt_symbols(self, verbose);
+ int nr_plt = dso__synthesize_plt_symbols(self, v);
if (nr_plt > 0)
ret += nr_plt;
}
@@ -807,7 +809,7 @@
}
static int dso__load_module(struct dso *self, struct mod_dso *mods, const char *name,
- symbol_filter_t filter, int verbose)
+ symbol_filter_t filter, int v)
{
struct module *mod = mod_dso__find_module(mods, name);
int err = 0, fd;
@@ -820,13 +822,13 @@
if (fd < 0)
return err;
- err = dso__load_sym(self, fd, name, filter, verbose, mod);
+ err = dso__load_sym(self, fd, name, filter, v, mod);
close(fd);
return err;
}
-int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose)
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int v)
{
struct mod_dso *mods = mod_dso__new_dso("modules");
struct module *pos;
@@ -844,7 +846,7 @@
next = rb_first(&mods->mods);
while (next) {
pos = rb_entry(next, struct module, rb_node);
- err = dso__load_module(self, mods, pos->name, filter, verbose);
+ err = dso__load_module(self, mods, pos->name, filter, v);
if (err < 0)
break;
@@ -887,14 +889,14 @@
}
static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
- symbol_filter_t filter, int verbose)
+ symbol_filter_t filter, int v)
{
int err, fd = open(vmlinux, O_RDONLY);
if (fd < 0)
return -1;
- err = dso__load_sym(self, fd, vmlinux, filter, verbose, NULL);
+ err = dso__load_sym(self, fd, vmlinux, filter, v, NULL);
if (err > 0)
dso__fill_symbol_holes(self);
@@ -905,18 +907,18 @@
}
int dso__load_kernel(struct dso *self, const char *vmlinux,
- symbol_filter_t filter, int verbose, int modules)
+ symbol_filter_t filter, int v, int use_modules)
{
int err = -1;
if (vmlinux) {
- err = dso__load_vmlinux(self, vmlinux, filter, verbose);
- if (err > 0 && modules)
- err = dso__load_modules(self, filter, verbose);
+ err = dso__load_vmlinux(self, vmlinux, filter, v);
+ if (err > 0 && use_modules)
+ err = dso__load_modules(self, filter, v);
}
if (err <= 0)
- err = dso__load_kallsyms(self, filter, verbose);
+ err = dso__load_kallsyms(self, filter, v);
if (err > 0)
self->origin = DSO__ORIG_KERNEL;
@@ -924,6 +926,103 @@
return err;
}
+LIST_HEAD(dsos);
+struct dso *kernel_dso;
+struct dso *vdso;
+struct dso *hypervisor_dso;
+
+const char *vmlinux_name = "vmlinux";
+int modules;
+
+static void dsos__add(struct dso *dso)
+{
+ list_add_tail(&dso->node, &dsos);
+}
+
+static struct dso *dsos__find(const char *name)
+{
+ struct dso *pos;
+
+ list_for_each_entry(pos, &dsos, node)
+ if (strcmp(pos->name, name) == 0)
+ return pos;
+ return NULL;
+}
+
+struct dso *dsos__findnew(const char *name)
+{
+ struct dso *dso = dsos__find(name);
+ int nr;
+
+ if (dso)
+ return dso;
+
+ dso = dso__new(name, 0);
+ if (!dso)
+ goto out_delete_dso;
+
+ nr = dso__load(dso, NULL, verbose);
+ if (nr < 0) {
+ eprintf("Failed to open: %s\n", name);
+ goto out_delete_dso;
+ }
+ if (!nr)
+ eprintf("No symbols found in: %s, maybe install a debug package?\n", name);
+
+ dsos__add(dso);
+
+ return dso;
+
+out_delete_dso:
+ dso__delete(dso);
+ return NULL;
+}
+
+void dsos__fprintf(FILE *fp)
+{
+ struct dso *pos;
+
+ list_for_each_entry(pos, &dsos, node)
+ dso__fprintf(pos, fp);
+}
+
+static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
+{
+ return dso__find_symbol(dso, ip);
+}
+
+int load_kernel(void)
+{
+ int err;
+
+ kernel_dso = dso__new("[kernel]", 0);
+ if (!kernel_dso)
+ return -1;
+
+ err = dso__load_kernel(kernel_dso, vmlinux_name, NULL, verbose, modules);
+ if (err <= 0) {
+ dso__delete(kernel_dso);
+ kernel_dso = NULL;
+ } else
+ dsos__add(kernel_dso);
+
+ vdso = dso__new("[vdso]", 0);
+ if (!vdso)
+ return -1;
+
+ vdso->find_symbol = vdso__find_symbol;
+
+ dsos__add(vdso);
+
+ hypervisor_dso = dso__new("[hypervisor]", 0);
+ if (!hypervisor_dso)
+ return -1;
+ dsos__add(hypervisor_dso);
+
+ return err;
+}
+
+
void symbol__init(void)
{
elf_version(EV_CURRENT);
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index b53bf01..6e84907 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -6,6 +6,7 @@
#include <linux/list.h>
#include <linux/rbtree.h>
#include "module.h"
+#include "event.h"
#ifdef HAVE_CPLUS_DEMANGLE
extern char *cplus_demangle(const char *, int);
@@ -54,7 +55,7 @@
char name[0];
};
-const char *sym_hist_filter;
+extern const char *sym_hist_filter;
typedef int (*symbol_filter_t)(struct dso *self, struct symbol *sym);
@@ -72,9 +73,20 @@
symbol_filter_t filter, int verbose, int modules);
int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose);
int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
+struct dso *dsos__findnew(const char *name);
+void dsos__fprintf(FILE *fp);
size_t dso__fprintf(struct dso *self, FILE *fp);
char dso__symtab_origin(const struct dso *self);
+int load_kernel(void);
+
void symbol__init(void);
+
+extern struct list_head dsos;
+extern struct dso *kernel_dso;
+extern struct dso *vdso;
+extern struct dso *hypervisor_dso;
+extern const char *vmlinux_name;
+extern int modules;
#endif /* _PERF_SYMBOL_ */
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
new file mode 100644
index 0000000..7635928
--- /dev/null
+++ b/tools/perf/util/thread.c
@@ -0,0 +1,175 @@
+#include "../perf.h"
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include "thread.h"
+#include "util.h"
+#include "debug.h"
+
+static struct thread *thread__new(pid_t pid)
+{
+ struct thread *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ self->pid = pid;
+ self->comm = malloc(32);
+ if (self->comm)
+ snprintf(self->comm, 32, ":%d", self->pid);
+ INIT_LIST_HEAD(&self->maps);
+ }
+
+ return self;
+}
+
+int thread__set_comm(struct thread *self, const char *comm)
+{
+ if (self->comm)
+ free(self->comm);
+ self->comm = strdup(comm);
+ return self->comm ? 0 : -ENOMEM;
+}
+
+static size_t thread__fprintf(struct thread *self, FILE *fp)
+{
+ struct map *pos;
+ size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
+
+ list_for_each_entry(pos, &self->maps, node)
+ ret += map__fprintf(pos, fp);
+
+ return ret;
+}
+
+struct thread *
+threads__findnew(pid_t pid, struct rb_root *threads, struct thread **last_match)
+{
+ struct rb_node **p = &threads->rb_node;
+ struct rb_node *parent = NULL;
+ struct thread *th;
+
+ /*
+ * Font-end cache - PID lookups come in blocks,
+ * so most of the time we dont have to look up
+ * the full rbtree:
+ */
+ if (*last_match && (*last_match)->pid == pid)
+ return *last_match;
+
+ while (*p != NULL) {
+ parent = *p;
+ th = rb_entry(parent, struct thread, rb_node);
+
+ if (th->pid == pid) {
+ *last_match = th;
+ return th;
+ }
+
+ if (pid < th->pid)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+
+ th = thread__new(pid);
+ if (th != NULL) {
+ rb_link_node(&th->rb_node, parent, p);
+ rb_insert_color(&th->rb_node, threads);
+ *last_match = th;
+ }
+
+ return th;
+}
+
+struct thread *
+register_idle_thread(struct rb_root *threads, struct thread **last_match)
+{
+ struct thread *thread = threads__findnew(0, threads, last_match);
+
+ if (!thread || thread__set_comm(thread, "[init]")) {
+ fprintf(stderr, "problem inserting idle task.\n");
+ exit(-1);
+ }
+
+ return thread;
+}
+
+void thread__insert_map(struct thread *self, struct map *map)
+{
+ struct map *pos, *tmp;
+
+ list_for_each_entry_safe(pos, tmp, &self->maps, node) {
+ if (map__overlap(pos, map)) {
+ if (verbose >= 2) {
+ printf("overlapping maps:\n");
+ map__fprintf(map, stdout);
+ map__fprintf(pos, stdout);
+ }
+
+ if (map->start <= pos->start && map->end > pos->start)
+ pos->start = map->end;
+
+ if (map->end >= pos->end && map->start < pos->end)
+ pos->end = map->start;
+
+ if (verbose >= 2) {
+ printf("after collision:\n");
+ map__fprintf(pos, stdout);
+ }
+
+ if (pos->start >= pos->end) {
+ list_del_init(&pos->node);
+ free(pos);
+ }
+ }
+ }
+
+ list_add_tail(&map->node, &self->maps);
+}
+
+int thread__fork(struct thread *self, struct thread *parent)
+{
+ struct map *map;
+
+ if (self->comm)
+ free(self->comm);
+ self->comm = strdup(parent->comm);
+ if (!self->comm)
+ return -ENOMEM;
+
+ list_for_each_entry(map, &parent->maps, node) {
+ struct map *new = map__clone(map);
+ if (!new)
+ return -ENOMEM;
+ thread__insert_map(self, new);
+ }
+
+ return 0;
+}
+
+struct map *thread__find_map(struct thread *self, u64 ip)
+{
+ struct map *pos;
+
+ if (self == NULL)
+ return NULL;
+
+ list_for_each_entry(pos, &self->maps, node)
+ if (ip >= pos->start && ip <= pos->end)
+ return pos;
+
+ return NULL;
+}
+
+size_t threads__fprintf(FILE *fp, struct rb_root *threads)
+{
+ size_t ret = 0;
+ struct rb_node *nd;
+
+ for (nd = rb_first(threads); nd; nd = rb_next(nd)) {
+ struct thread *pos = rb_entry(nd, struct thread, rb_node);
+
+ ret += thread__fprintf(pos, fp);
+ }
+
+ return ret;
+}
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
new file mode 100644
index 0000000..634f280
--- /dev/null
+++ b/tools/perf/util/thread.h
@@ -0,0 +1,21 @@
+#include <linux/rbtree.h>
+#include <linux/list.h>
+#include <unistd.h>
+#include "symbol.h"
+
+struct thread {
+ struct rb_node rb_node;
+ struct list_head maps;
+ pid_t pid;
+ char *comm;
+};
+
+int thread__set_comm(struct thread *self, const char *comm);
+struct thread *
+threads__findnew(pid_t pid, struct rb_root *threads, struct thread **last_match);
+struct thread *
+register_idle_thread(struct rb_root *threads, struct thread **last_match);
+void thread__insert_map(struct thread *self, struct map *map);
+int thread__fork(struct thread *self, struct thread *parent);
+struct map *thread__find_map(struct thread *self, u64 ip);
+size_t threads__fprintf(FILE *fp, struct rb_root *threads);
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
new file mode 100644
index 0000000..6c9302a
--- /dev/null
+++ b/tools/perf/util/trace-event-info.c
@@ -0,0 +1,539 @@
+/*
+ * Copyright (C) 2008,2009, Steven Rostedt <srostedt@redhat.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License (not later!)
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#define _GNU_SOURCE
+#include <dirent.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <pthread.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <errno.h>
+#include <stdbool.h>
+
+#include "../perf.h"
+#include "trace-event.h"
+
+
+#define VERSION "0.5"
+
+#define _STR(x) #x
+#define STR(x) _STR(x)
+#define MAX_PATH 256
+
+#define TRACE_CTRL "tracing_on"
+#define TRACE "trace"
+#define AVAILABLE "available_tracers"
+#define CURRENT "current_tracer"
+#define ITER_CTRL "trace_options"
+#define MAX_LATENCY "tracing_max_latency"
+
+unsigned int page_size;
+
+static const char *output_file = "trace.info";
+static int output_fd;
+
+struct event_list {
+ struct event_list *next;
+ const char *event;
+};
+
+struct events {
+ struct events *sibling;
+ struct events *children;
+ struct events *next;
+ char *name;
+};
+
+
+
+static void die(const char *fmt, ...)
+{
+ va_list ap;
+ int ret = errno;
+
+ if (errno)
+ perror("trace-cmd");
+ else
+ ret = -1;
+
+ va_start(ap, fmt);
+ fprintf(stderr, " ");
+ vfprintf(stderr, fmt, ap);
+ va_end(ap);
+
+ fprintf(stderr, "\n");
+ exit(ret);
+}
+
+void *malloc_or_die(unsigned int size)
+{
+ void *data;
+
+ data = malloc(size);
+ if (!data)
+ die("malloc");
+ return data;
+}
+
+static const char *find_debugfs(void)
+{
+ static char debugfs[MAX_PATH+1];
+ static int debugfs_found;
+ char type[100];
+ FILE *fp;
+
+ if (debugfs_found)
+ return debugfs;
+
+ if ((fp = fopen("/proc/mounts","r")) == NULL)
+ die("Can't open /proc/mounts for read");
+
+ while (fscanf(fp, "%*s %"
+ STR(MAX_PATH)
+ "s %99s %*s %*d %*d\n",
+ debugfs, type) == 2) {
+ if (strcmp(type, "debugfs") == 0)
+ break;
+ }
+ fclose(fp);
+
+ if (strcmp(type, "debugfs") != 0)
+ die("debugfs not mounted, please mount");
+
+ debugfs_found = 1;
+
+ return debugfs;
+}
+
+/*
+ * Finds the path to the debugfs/tracing
+ * Allocates the string and stores it.
+ */
+static const char *find_tracing_dir(void)
+{
+ static char *tracing;
+ static int tracing_found;
+ const char *debugfs;
+
+ if (tracing_found)
+ return tracing;
+
+ debugfs = find_debugfs();
+
+ tracing = malloc_or_die(strlen(debugfs) + 9);
+
+ sprintf(tracing, "%s/tracing", debugfs);
+
+ tracing_found = 1;
+ return tracing;
+}
+
+static char *get_tracing_file(const char *name)
+{
+ const char *tracing;
+ char *file;
+
+ tracing = find_tracing_dir();
+ if (!tracing)
+ return NULL;
+
+ file = malloc_or_die(strlen(tracing) + strlen(name) + 2);
+
+ sprintf(file, "%s/%s", tracing, name);
+ return file;
+}
+
+static void put_tracing_file(char *file)
+{
+ free(file);
+}
+
+static ssize_t write_or_die(const void *buf, size_t len)
+{
+ int ret;
+
+ ret = write(output_fd, buf, len);
+ if (ret < 0)
+ die("writing to '%s'", output_file);
+
+ return ret;
+}
+
+int bigendian(void)
+{
+ unsigned char str[] = { 0x1, 0x2, 0x3, 0x4, 0x0, 0x0, 0x0, 0x0};
+ unsigned int *ptr;
+
+ ptr = (unsigned int *)(void *)str;
+ return *ptr == 0x01020304;
+}
+
+static unsigned long long copy_file_fd(int fd)
+{
+ unsigned long long size = 0;
+ char buf[BUFSIZ];
+ int r;
+
+ do {
+ r = read(fd, buf, BUFSIZ);
+ if (r > 0) {
+ size += r;
+ write_or_die(buf, r);
+ }
+ } while (r > 0);
+
+ return size;
+}
+
+static unsigned long long copy_file(const char *file)
+{
+ unsigned long long size = 0;
+ int fd;
+
+ fd = open(file, O_RDONLY);
+ if (fd < 0)
+ die("Can't read '%s'", file);
+ size = copy_file_fd(fd);
+ close(fd);
+
+ return size;
+}
+
+static unsigned long get_size_fd(int fd)
+{
+ unsigned long long size = 0;
+ char buf[BUFSIZ];
+ int r;
+
+ do {
+ r = read(fd, buf, BUFSIZ);
+ if (r > 0)
+ size += r;
+ } while (r > 0);
+
+ lseek(fd, 0, SEEK_SET);
+
+ return size;
+}
+
+static unsigned long get_size(const char *file)
+{
+ unsigned long long size = 0;
+ int fd;
+
+ fd = open(file, O_RDONLY);
+ if (fd < 0)
+ die("Can't read '%s'", file);
+ size = get_size_fd(fd);
+ close(fd);
+
+ return size;
+}
+
+static void read_header_files(void)
+{
+ unsigned long long size, check_size;
+ char *path;
+ int fd;
+
+ path = get_tracing_file("events/header_page");
+ fd = open(path, O_RDONLY);
+ if (fd < 0)
+ die("can't read '%s'", path);
+
+ /* unfortunately, you can not stat debugfs files for size */
+ size = get_size_fd(fd);
+
+ write_or_die("header_page", 12);
+ write_or_die(&size, 8);
+ check_size = copy_file_fd(fd);
+ if (size != check_size)
+ die("wrong size for '%s' size=%lld read=%lld",
+ path, size, check_size);
+ put_tracing_file(path);
+
+ path = get_tracing_file("events/header_event");
+ fd = open(path, O_RDONLY);
+ if (fd < 0)
+ die("can't read '%s'", path);
+
+ size = get_size_fd(fd);
+
+ write_or_die("header_event", 13);
+ write_or_die(&size, 8);
+ check_size = copy_file_fd(fd);
+ if (size != check_size)
+ die("wrong size for '%s'", path);
+ put_tracing_file(path);
+}
+
+static bool name_in_tp_list(char *sys, struct tracepoint_path *tps)
+{
+ while (tps) {
+ if (!strcmp(sys, tps->name))
+ return true;
+ tps = tps->next;
+ }
+
+ return false;
+}
+
+static void copy_event_system(const char *sys, struct tracepoint_path *tps)
+{
+ unsigned long long size, check_size;
+ struct dirent *dent;
+ struct stat st;
+ char *format;
+ DIR *dir;
+ int count = 0;
+ int ret;
+
+ dir = opendir(sys);
+ if (!dir)
+ die("can't read directory '%s'", sys);
+
+ while ((dent = readdir(dir))) {
+ if (strcmp(dent->d_name, ".") == 0 ||
+ strcmp(dent->d_name, "..") == 0 ||
+ !name_in_tp_list(dent->d_name, tps))
+ continue;
+ format = malloc_or_die(strlen(sys) + strlen(dent->d_name) + 10);
+ sprintf(format, "%s/%s/format", sys, dent->d_name);
+ ret = stat(format, &st);
+ free(format);
+ if (ret < 0)
+ continue;
+ count++;
+ }
+
+ write_or_die(&count, 4);
+
+ rewinddir(dir);
+ while ((dent = readdir(dir))) {
+ if (strcmp(dent->d_name, ".") == 0 ||
+ strcmp(dent->d_name, "..") == 0 ||
+ !name_in_tp_list(dent->d_name, tps))
+ continue;
+ format = malloc_or_die(strlen(sys) + strlen(dent->d_name) + 10);
+ sprintf(format, "%s/%s/format", sys, dent->d_name);
+ ret = stat(format, &st);
+
+ if (ret >= 0) {
+ /* unfortunately, you can not stat debugfs files for size */
+ size = get_size(format);
+ write_or_die(&size, 8);
+ check_size = copy_file(format);
+ if (size != check_size)
+ die("error in size of file '%s'", format);
+ }
+
+ free(format);
+ }
+}
+
+static void read_ftrace_files(struct tracepoint_path *tps)
+{
+ char *path;
+
+ path = get_tracing_file("events/ftrace");
+
+ copy_event_system(path, tps);
+
+ put_tracing_file(path);
+}
+
+static bool system_in_tp_list(char *sys, struct tracepoint_path *tps)
+{
+ while (tps) {
+ if (!strcmp(sys, tps->system))
+ return true;
+ tps = tps->next;
+ }
+
+ return false;
+}
+
+static void read_event_files(struct tracepoint_path *tps)
+{
+ struct dirent *dent;
+ struct stat st;
+ char *path;
+ char *sys;
+ DIR *dir;
+ int count = 0;
+ int ret;
+
+ path = get_tracing_file("events");
+
+ dir = opendir(path);
+ if (!dir)
+ die("can't read directory '%s'", path);
+
+ while ((dent = readdir(dir))) {
+ if (strcmp(dent->d_name, ".") == 0 ||
+ strcmp(dent->d_name, "..") == 0 ||
+ strcmp(dent->d_name, "ftrace") == 0 ||
+ !system_in_tp_list(dent->d_name, tps))
+ continue;
+ sys = malloc_or_die(strlen(path) + strlen(dent->d_name) + 2);
+ sprintf(sys, "%s/%s", path, dent->d_name);
+ ret = stat(sys, &st);
+ free(sys);
+ if (ret < 0)
+ continue;
+ if (S_ISDIR(st.st_mode))
+ count++;
+ }
+
+ write_or_die(&count, 4);
+
+ rewinddir(dir);
+ while ((dent = readdir(dir))) {
+ if (strcmp(dent->d_name, ".") == 0 ||
+ strcmp(dent->d_name, "..") == 0 ||
+ strcmp(dent->d_name, "ftrace") == 0 ||
+ !system_in_tp_list(dent->d_name, tps))
+ continue;
+ sys = malloc_or_die(strlen(path) + strlen(dent->d_name) + 2);
+ sprintf(sys, "%s/%s", path, dent->d_name);
+ ret = stat(sys, &st);
+ if (ret >= 0) {
+ if (S_ISDIR(st.st_mode)) {
+ write_or_die(dent->d_name, strlen(dent->d_name) + 1);
+ copy_event_system(sys, tps);
+ }
+ }
+ free(sys);
+ }
+
+ put_tracing_file(path);
+}
+
+static void read_proc_kallsyms(void)
+{
+ unsigned int size, check_size;
+ const char *path = "/proc/kallsyms";
+ struct stat st;
+ int ret;
+
+ ret = stat(path, &st);
+ if (ret < 0) {
+ /* not found */
+ size = 0;
+ write_or_die(&size, 4);
+ return;
+ }
+ size = get_size(path);
+ write_or_die(&size, 4);
+ check_size = copy_file(path);
+ if (size != check_size)
+ die("error in size of file '%s'", path);
+
+}
+
+static void read_ftrace_printk(void)
+{
+ unsigned int size, check_size;
+ const char *path;
+ struct stat st;
+ int ret;
+
+ path = get_tracing_file("printk_formats");
+ ret = stat(path, &st);
+ if (ret < 0) {
+ /* not found */
+ size = 0;
+ write_or_die(&size, 4);
+ return;
+ }
+ size = get_size(path);
+ write_or_die(&size, 4);
+ check_size = copy_file(path);
+ if (size != check_size)
+ die("error in size of file '%s'", path);
+
+}
+
+static struct tracepoint_path *
+get_tracepoints_path(struct perf_counter_attr *pattrs, int nb_counters)
+{
+ struct tracepoint_path path, *ppath = &path;
+ int i;
+
+ for (i = 0; i < nb_counters; i++) {
+ if (pattrs[i].type != PERF_TYPE_TRACEPOINT)
+ continue;
+ ppath->next = tracepoint_id_to_path(pattrs[i].config);
+ if (!ppath->next)
+ die("%s\n", "No memory to alloc tracepoints list");
+ ppath = ppath->next;
+ }
+
+ return path.next;
+}
+void read_tracing_data(struct perf_counter_attr *pattrs, int nb_counters)
+{
+ char buf[BUFSIZ];
+ struct tracepoint_path *tps;
+
+ output_fd = open(output_file, O_WRONLY | O_CREAT | O_TRUNC | O_LARGEFILE, 0644);
+ if (output_fd < 0)
+ die("creating file '%s'", output_file);
+
+ buf[0] = 23;
+ buf[1] = 8;
+ buf[2] = 68;
+ memcpy(buf + 3, "tracing", 7);
+
+ write_or_die(buf, 10);
+
+ write_or_die(VERSION, strlen(VERSION) + 1);
+
+ /* save endian */
+ if (bigendian())
+ buf[0] = 1;
+ else
+ buf[0] = 0;
+
+ write_or_die(buf, 1);
+
+ /* save size of long */
+ buf[0] = sizeof(long);
+ write_or_die(buf, 1);
+
+ /* save page_size */
+ page_size = getpagesize();
+ write_or_die(&page_size, 4);
+
+ tps = get_tracepoints_path(pattrs, nb_counters);
+
+ read_header_files();
+ read_ftrace_files(tps);
+ read_event_files(tps);
+ read_proc_kallsyms();
+ read_ftrace_printk();
+}
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
new file mode 100644
index 0000000..629e602
--- /dev/null
+++ b/tools/perf/util/trace-event-parse.c
@@ -0,0 +1,2942 @@
+/*
+ * Copyright (C) 2009, Steven Rostedt <srostedt@redhat.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License (not later!)
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * The parts for function graph printing was taken and modified from the
+ * Linux Kernel that were written by Frederic Weisbecker.
+ */
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+
+#undef _GNU_SOURCE
+#include "../perf.h"
+#include "util.h"
+#include "trace-event.h"
+
+int header_page_ts_offset;
+int header_page_ts_size;
+int header_page_size_offset;
+int header_page_size_size;
+int header_page_data_offset;
+int header_page_data_size;
+
+static char *input_buf;
+static unsigned long long input_buf_ptr;
+static unsigned long long input_buf_siz;
+
+static int cpus;
+static int long_size;
+
+static void init_input_buf(char *buf, unsigned long long size)
+{
+ input_buf = buf;
+ input_buf_siz = size;
+ input_buf_ptr = 0;
+}
+
+struct cmdline {
+ char *comm;
+ int pid;
+};
+
+static struct cmdline *cmdlines;
+static int cmdline_count;
+
+static int cmdline_cmp(const void *a, const void *b)
+{
+ const struct cmdline *ca = a;
+ const struct cmdline *cb = b;
+
+ if (ca->pid < cb->pid)
+ return -1;
+ if (ca->pid > cb->pid)
+ return 1;
+
+ return 0;
+}
+
+void parse_cmdlines(char *file, int size __unused)
+{
+ struct cmdline_list {
+ struct cmdline_list *next;
+ char *comm;
+ int pid;
+ } *list = NULL, *item;
+ char *line;
+ char *next = NULL;
+ int i;
+
+ line = strtok_r(file, "\n", &next);
+ while (line) {
+ item = malloc_or_die(sizeof(*item));
+ sscanf(line, "%d %as", &item->pid,
+ (float *)(void *)&item->comm); /* workaround gcc warning */
+ item->next = list;
+ list = item;
+ line = strtok_r(NULL, "\n", &next);
+ cmdline_count++;
+ }
+
+ cmdlines = malloc_or_die(sizeof(*cmdlines) * cmdline_count);
+
+ i = 0;
+ while (list) {
+ cmdlines[i].pid = list->pid;
+ cmdlines[i].comm = list->comm;
+ i++;
+ item = list;
+ list = list->next;
+ free(item);
+ }
+
+ qsort(cmdlines, cmdline_count, sizeof(*cmdlines), cmdline_cmp);
+}
+
+static struct func_map {
+ unsigned long long addr;
+ char *func;
+ char *mod;
+} *func_list;
+static unsigned int func_count;
+
+static int func_cmp(const void *a, const void *b)
+{
+ const struct func_map *fa = a;
+ const struct func_map *fb = b;
+
+ if (fa->addr < fb->addr)
+ return -1;
+ if (fa->addr > fb->addr)
+ return 1;
+
+ return 0;
+}
+
+void parse_proc_kallsyms(char *file, unsigned int size __unused)
+{
+ struct func_list {
+ struct func_list *next;
+ unsigned long long addr;
+ char *func;
+ char *mod;
+ } *list = NULL, *item;
+ char *line;
+ char *next = NULL;
+ char *addr_str;
+ char ch;
+ int ret;
+ int i;
+
+ line = strtok_r(file, "\n", &next);
+ while (line) {
+ item = malloc_or_die(sizeof(*item));
+ item->mod = NULL;
+ ret = sscanf(line, "%as %c %as\t[%as",
+ (float *)(void *)&addr_str, /* workaround gcc warning */
+ &ch,
+ (float *)(void *)&item->func,
+ (float *)(void *)&item->mod);
+ item->addr = strtoull(addr_str, NULL, 16);
+ free(addr_str);
+
+ /* truncate the extra ']' */
+ if (item->mod)
+ item->mod[strlen(item->mod) - 1] = 0;
+
+
+ item->next = list;
+ list = item;
+ line = strtok_r(NULL, "\n", &next);
+ func_count++;
+ }
+
+ func_list = malloc_or_die(sizeof(*func_list) * func_count + 1);
+
+ i = 0;
+ while (list) {
+ func_list[i].func = list->func;
+ func_list[i].addr = list->addr;
+ func_list[i].mod = list->mod;
+ i++;
+ item = list;
+ list = list->next;
+ free(item);
+ }
+
+ qsort(func_list, func_count, sizeof(*func_list), func_cmp);
+
+ /*
+ * Add a special record at the end.
+ */
+ func_list[func_count].func = NULL;
+ func_list[func_count].addr = 0;
+ func_list[func_count].mod = NULL;
+}
+
+/*
+ * We are searching for a record in between, not an exact
+ * match.
+ */
+static int func_bcmp(const void *a, const void *b)
+{
+ const struct func_map *fa = a;
+ const struct func_map *fb = b;
+
+ if ((fa->addr == fb->addr) ||
+
+ (fa->addr > fb->addr &&
+ fa->addr < (fb+1)->addr))
+ return 0;
+
+ if (fa->addr < fb->addr)
+ return -1;
+
+ return 1;
+}
+
+static struct func_map *find_func(unsigned long long addr)
+{
+ struct func_map *func;
+ struct func_map key;
+
+ key.addr = addr;
+
+ func = bsearch(&key, func_list, func_count, sizeof(*func_list),
+ func_bcmp);
+
+ return func;
+}
+
+void print_funcs(void)
+{
+ int i;
+
+ for (i = 0; i < (int)func_count; i++) {
+ printf("%016llx %s",
+ func_list[i].addr,
+ func_list[i].func);
+ if (func_list[i].mod)
+ printf(" [%s]\n", func_list[i].mod);
+ else
+ printf("\n");
+ }
+}
+
+static struct printk_map {
+ unsigned long long addr;
+ char *printk;
+} *printk_list;
+static unsigned int printk_count;
+
+static int printk_cmp(const void *a, const void *b)
+{
+ const struct func_map *fa = a;
+ const struct func_map *fb = b;
+
+ if (fa->addr < fb->addr)
+ return -1;
+ if (fa->addr > fb->addr)
+ return 1;
+
+ return 0;
+}
+
+static struct printk_map *find_printk(unsigned long long addr)
+{
+ struct printk_map *printk;
+ struct printk_map key;
+
+ key.addr = addr;
+
+ printk = bsearch(&key, printk_list, printk_count, sizeof(*printk_list),
+ printk_cmp);
+
+ return printk;
+}
+
+void parse_ftrace_printk(char *file, unsigned int size __unused)
+{
+ struct printk_list {
+ struct printk_list *next;
+ unsigned long long addr;
+ char *printk;
+ } *list = NULL, *item;
+ char *line;
+ char *next = NULL;
+ char *addr_str;
+ int ret;
+ int i;
+
+ line = strtok_r(file, "\n", &next);
+ while (line) {
+ item = malloc_or_die(sizeof(*item));
+ ret = sscanf(line, "%as : %as",
+ (float *)(void *)&addr_str, /* workaround gcc warning */
+ (float *)(void *)&item->printk);
+ item->addr = strtoull(addr_str, NULL, 16);
+ free(addr_str);
+
+ item->next = list;
+ list = item;
+ line = strtok_r(NULL, "\n", &next);
+ printk_count++;
+ }
+
+ printk_list = malloc_or_die(sizeof(*printk_list) * printk_count + 1);
+
+ i = 0;
+ while (list) {
+ printk_list[i].printk = list->printk;
+ printk_list[i].addr = list->addr;
+ i++;
+ item = list;
+ list = list->next;
+ free(item);
+ }
+
+ qsort(printk_list, printk_count, sizeof(*printk_list), printk_cmp);
+}
+
+void print_printk(void)
+{
+ int i;
+
+ for (i = 0; i < (int)printk_count; i++) {
+ printf("%016llx %s\n",
+ printk_list[i].addr,
+ printk_list[i].printk);
+ }
+}
+
+static struct event *alloc_event(void)
+{
+ struct event *event;
+
+ event = malloc_or_die(sizeof(*event));
+ memset(event, 0, sizeof(*event));
+
+ return event;
+}
+
+enum event_type {
+ EVENT_ERROR,
+ EVENT_NONE,
+ EVENT_SPACE,
+ EVENT_NEWLINE,
+ EVENT_OP,
+ EVENT_DELIM,
+ EVENT_ITEM,
+ EVENT_DQUOTE,
+ EVENT_SQUOTE,
+};
+
+static struct event *event_list;
+
+static void add_event(struct event *event)
+{
+ event->next = event_list;
+ event_list = event;
+}
+
+static int event_item_type(enum event_type type)
+{
+ switch (type) {
+ case EVENT_ITEM ... EVENT_SQUOTE:
+ return 1;
+ case EVENT_ERROR ... EVENT_DELIM:
+ default:
+ return 0;
+ }
+}
+
+static void free_arg(struct print_arg *arg)
+{
+ if (!arg)
+ return;
+
+ switch (arg->type) {
+ case PRINT_ATOM:
+ if (arg->atom.atom)
+ free(arg->atom.atom);
+ break;
+ case PRINT_NULL:
+ case PRINT_FIELD ... PRINT_OP:
+ default:
+ /* todo */
+ break;
+ }
+
+ free(arg);
+}
+
+static enum event_type get_type(int ch)
+{
+ if (ch == '\n')
+ return EVENT_NEWLINE;
+ if (isspace(ch))
+ return EVENT_SPACE;
+ if (isalnum(ch) || ch == '_')
+ return EVENT_ITEM;
+ if (ch == '\'')
+ return EVENT_SQUOTE;
+ if (ch == '"')
+ return EVENT_DQUOTE;
+ if (!isprint(ch))
+ return EVENT_NONE;
+ if (ch == '(' || ch == ')' || ch == ',')
+ return EVENT_DELIM;
+
+ return EVENT_OP;
+}
+
+static int __read_char(void)
+{
+ if (input_buf_ptr >= input_buf_siz)
+ return -1;
+
+ return input_buf[input_buf_ptr++];
+}
+
+static int __peek_char(void)
+{
+ if (input_buf_ptr >= input_buf_siz)
+ return -1;
+
+ return input_buf[input_buf_ptr];
+}
+
+static enum event_type __read_token(char **tok)
+{
+ char buf[BUFSIZ];
+ int ch, last_ch, quote_ch, next_ch;
+ int i = 0;
+ int tok_size = 0;
+ enum event_type type;
+
+ *tok = NULL;
+
+
+ ch = __read_char();
+ if (ch < 0)
+ return EVENT_NONE;
+
+ type = get_type(ch);
+ if (type == EVENT_NONE)
+ return type;
+
+ buf[i++] = ch;
+
+ switch (type) {
+ case EVENT_NEWLINE:
+ case EVENT_DELIM:
+ *tok = malloc_or_die(2);
+ (*tok)[0] = ch;
+ (*tok)[1] = 0;
+ return type;
+
+ case EVENT_OP:
+ switch (ch) {
+ case '-':
+ next_ch = __peek_char();
+ if (next_ch == '>') {
+ buf[i++] = __read_char();
+ break;
+ }
+ /* fall through */
+ case '+':
+ case '|':
+ case '&':
+ case '>':
+ case '<':
+ last_ch = ch;
+ ch = __peek_char();
+ if (ch != last_ch)
+ goto test_equal;
+ buf[i++] = __read_char();
+ switch (last_ch) {
+ case '>':
+ case '<':
+ goto test_equal;
+ default:
+ break;
+ }
+ break;
+ case '!':
+ case '=':
+ goto test_equal;
+ default: /* what should we do instead? */
+ break;
+ }
+ buf[i] = 0;
+ *tok = strdup(buf);
+ return type;
+
+ test_equal:
+ ch = __peek_char();
+ if (ch == '=')
+ buf[i++] = __read_char();
+ break;
+
+ case EVENT_DQUOTE:
+ case EVENT_SQUOTE:
+ /* don't keep quotes */
+ i--;
+ quote_ch = ch;
+ last_ch = 0;
+ do {
+ if (i == (BUFSIZ - 1)) {
+ buf[i] = 0;
+ if (*tok) {
+ *tok = realloc(*tok, tok_size + BUFSIZ);
+ if (!*tok)
+ return EVENT_NONE;
+ strcat(*tok, buf);
+ } else
+ *tok = strdup(buf);
+
+ if (!*tok)
+ return EVENT_NONE;
+ tok_size += BUFSIZ;
+ i = 0;
+ }
+ last_ch = ch;
+ ch = __read_char();
+ buf[i++] = ch;
+ } while (ch != quote_ch && last_ch != '\\');
+ /* remove the last quote */
+ i--;
+ goto out;
+
+ case EVENT_ERROR ... EVENT_SPACE:
+ case EVENT_ITEM:
+ default:
+ break;
+ }
+
+ while (get_type(__peek_char()) == type) {
+ if (i == (BUFSIZ - 1)) {
+ buf[i] = 0;
+ if (*tok) {
+ *tok = realloc(*tok, tok_size + BUFSIZ);
+ if (!*tok)
+ return EVENT_NONE;
+ strcat(*tok, buf);
+ } else
+ *tok = strdup(buf);
+
+ if (!*tok)
+ return EVENT_NONE;
+ tok_size += BUFSIZ;
+ i = 0;
+ }
+ ch = __read_char();
+ buf[i++] = ch;
+ }
+
+ out:
+ buf[i] = 0;
+ if (*tok) {
+ *tok = realloc(*tok, tok_size + i);
+ if (!*tok)
+ return EVENT_NONE;
+ strcat(*tok, buf);
+ } else
+ *tok = strdup(buf);
+ if (!*tok)
+ return EVENT_NONE;
+
+ return type;
+}
+
+static void free_token(char *tok)
+{
+ if (tok)
+ free(tok);
+}
+
+static enum event_type read_token(char **tok)
+{
+ enum event_type type;
+
+ for (;;) {
+ type = __read_token(tok);
+ if (type != EVENT_SPACE)
+ return type;
+
+ free_token(*tok);
+ }
+
+ /* not reached */
+ return EVENT_NONE;
+}
+
+/* no newline */
+static enum event_type read_token_item(char **tok)
+{
+ enum event_type type;
+
+ for (;;) {
+ type = __read_token(tok);
+ if (type != EVENT_SPACE && type != EVENT_NEWLINE)
+ return type;
+
+ free_token(*tok);
+ }
+
+ /* not reached */
+ return EVENT_NONE;
+}
+
+static int test_type(enum event_type type, enum event_type expect)
+{
+ if (type != expect) {
+ die("Error: expected type %d but read %d",
+ expect, type);
+ return -1;
+ }
+ return 0;
+}
+
+static int test_type_token(enum event_type type, char *token,
+ enum event_type expect, char *expect_tok)
+{
+ if (type != expect) {
+ die("Error: expected type %d but read %d",
+ expect, type);
+ return -1;
+ }
+
+ if (strcmp(token, expect_tok) != 0) {
+ die("Error: expected '%s' but read '%s'",
+ expect_tok, token);
+ return -1;
+ }
+ return 0;
+}
+
+static int __read_expect_type(enum event_type expect, char **tok, int newline_ok)
+{
+ enum event_type type;
+
+ if (newline_ok)
+ type = read_token(tok);
+ else
+ type = read_token_item(tok);
+ return test_type(type, expect);
+}
+
+static int read_expect_type(enum event_type expect, char **tok)
+{
+ return __read_expect_type(expect, tok, 1);
+}
+
+static int __read_expected(enum event_type expect, char *str, int newline_ok)
+{
+ enum event_type type;
+ char *token;
+ int ret;
+
+ if (newline_ok)
+ type = read_token(&token);
+ else
+ type = read_token_item(&token);
+
+ ret = test_type_token(type, token, expect, str);
+
+ free_token(token);
+
+ return 0;
+}
+
+static int read_expected(enum event_type expect, char *str)
+{
+ return __read_expected(expect, str, 1);
+}
+
+static int read_expected_item(enum event_type expect, char *str)
+{
+ return __read_expected(expect, str, 0);
+}
+
+static char *event_read_name(void)
+{
+ char *token;
+
+ if (read_expected(EVENT_ITEM, (char *)"name") < 0)
+ return NULL;
+
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return NULL;
+
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ goto fail;
+
+ return token;
+
+ fail:
+ free_token(token);
+ return NULL;
+}
+
+static int event_read_id(void)
+{
+ char *token;
+ int id;
+
+ if (read_expected_item(EVENT_ITEM, (char *)"ID") < 0)
+ return -1;
+
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return -1;
+
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ goto fail;
+
+ id = strtoul(token, NULL, 0);
+ free_token(token);
+ return id;
+
+ fail:
+ free_token(token);
+ return -1;
+}
+
+static int event_read_fields(struct event *event, struct format_field **fields)
+{
+ struct format_field *field = NULL;
+ enum event_type type;
+ char *token;
+ char *last_token;
+ int count = 0;
+
+ do {
+ type = read_token(&token);
+ if (type == EVENT_NEWLINE) {
+ free_token(token);
+ return count;
+ }
+
+ count++;
+
+ if (test_type_token(type, token, EVENT_ITEM, (char *)"field"))
+ goto fail;
+ free_token(token);
+
+ type = read_token(&token);
+ /*
+ * The ftrace fields may still use the "special" name.
+ * Just ignore it.
+ */
+ if (event->flags & EVENT_FL_ISFTRACE &&
+ type == EVENT_ITEM && strcmp(token, "special") == 0) {
+ free_token(token);
+ type = read_token(&token);
+ }
+
+ if (test_type_token(type, token, EVENT_OP, (char *)":") < 0)
+ return -1;
+
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ goto fail;
+
+ last_token = token;
+
+ field = malloc_or_die(sizeof(*field));
+ memset(field, 0, sizeof(*field));
+
+ /* read the rest of the type */
+ for (;;) {
+ type = read_token(&token);
+ if (type == EVENT_ITEM ||
+ (type == EVENT_OP && strcmp(token, "*") == 0) ||
+ /*
+ * Some of the ftrace fields are broken and have
+ * an illegal "." in them.
+ */
+ (event->flags & EVENT_FL_ISFTRACE &&
+ type == EVENT_OP && strcmp(token, ".") == 0)) {
+
+ if (strcmp(token, "*") == 0)
+ field->flags |= FIELD_IS_POINTER;
+
+ if (field->type) {
+ field->type = realloc(field->type,
+ strlen(field->type) +
+ strlen(last_token) + 2);
+ strcat(field->type, " ");
+ strcat(field->type, last_token);
+ } else
+ field->type = last_token;
+ last_token = token;
+ continue;
+ }
+
+ break;
+ }
+
+ if (!field->type) {
+ die("no type found");
+ goto fail;
+ }
+ field->name = last_token;
+
+ if (test_type(type, EVENT_OP))
+ goto fail;
+
+ if (strcmp(token, "[") == 0) {
+ enum event_type last_type = type;
+ char *brackets = token;
+ int len;
+
+ field->flags |= FIELD_IS_ARRAY;
+
+ type = read_token(&token);
+ while (strcmp(token, "]") != 0) {
+ if (last_type == EVENT_ITEM &&
+ type == EVENT_ITEM)
+ len = 2;
+ else
+ len = 1;
+ last_type = type;
+
+ brackets = realloc(brackets,
+ strlen(brackets) +
+ strlen(token) + len);
+ if (len == 2)
+ strcat(brackets, " ");
+ strcat(brackets, token);
+ free_token(token);
+ type = read_token(&token);
+ if (type == EVENT_NONE) {
+ die("failed to find token");
+ goto fail;
+ }
+ }
+
+ free_token(token);
+
+ brackets = realloc(brackets, strlen(brackets) + 2);
+ strcat(brackets, "]");
+
+ /* add brackets to type */
+
+ type = read_token(&token);
+ /*
+ * If the next token is not an OP, then it is of
+ * the format: type [] item;
+ */
+ if (type == EVENT_ITEM) {
+ field->type = realloc(field->type,
+ strlen(field->type) +
+ strlen(field->name) +
+ strlen(brackets) + 2);
+ strcat(field->type, " ");
+ strcat(field->type, field->name);
+ free_token(field->name);
+ strcat(field->type, brackets);
+ field->name = token;
+ type = read_token(&token);
+ } else {
+ field->type = realloc(field->type,
+ strlen(field->type) +
+ strlen(brackets) + 1);
+ strcat(field->type, brackets);
+ }
+ free(brackets);
+ }
+
+ if (test_type_token(type, token, EVENT_OP, (char *)";"))
+ goto fail;
+ free_token(token);
+
+ if (read_expected(EVENT_ITEM, (char *)"offset") < 0)
+ goto fail_expect;
+
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ goto fail_expect;
+
+ if (read_expect_type(EVENT_ITEM, &token))
+ goto fail;
+ field->offset = strtoul(token, NULL, 0);
+ free_token(token);
+
+ if (read_expected(EVENT_OP, (char *)";") < 0)
+ goto fail_expect;
+
+ if (read_expected(EVENT_ITEM, (char *)"size") < 0)
+ goto fail_expect;
+
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ goto fail_expect;
+
+ if (read_expect_type(EVENT_ITEM, &token))
+ goto fail;
+ field->size = strtoul(token, NULL, 0);
+ free_token(token);
+
+ if (read_expected(EVENT_OP, (char *)";") < 0)
+ goto fail_expect;
+
+ if (read_expect_type(EVENT_NEWLINE, &token) < 0)
+ goto fail;
+ free_token(token);
+
+ *fields = field;
+ fields = &field->next;
+
+ } while (1);
+
+ return 0;
+
+fail:
+ free_token(token);
+fail_expect:
+ if (field)
+ free(field);
+ return -1;
+}
+
+static int event_read_format(struct event *event)
+{
+ char *token;
+ int ret;
+
+ if (read_expected_item(EVENT_ITEM, (char *)"format") < 0)
+ return -1;
+
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return -1;
+
+ if (read_expect_type(EVENT_NEWLINE, &token))
+ goto fail;
+ free_token(token);
+
+ ret = event_read_fields(event, &event->format.common_fields);
+ if (ret < 0)
+ return ret;
+ event->format.nr_common = ret;
+
+ ret = event_read_fields(event, &event->format.fields);
+ if (ret < 0)
+ return ret;
+ event->format.nr_fields = ret;
+
+ return 0;
+
+ fail:
+ free_token(token);
+ return -1;
+}
+
+enum event_type
+process_arg_token(struct event *event, struct print_arg *arg,
+ char **tok, enum event_type type);
+
+static enum event_type
+process_arg(struct event *event, struct print_arg *arg, char **tok)
+{
+ enum event_type type;
+ char *token;
+
+ type = read_token(&token);
+ *tok = token;
+
+ return process_arg_token(event, arg, tok, type);
+}
+
+static enum event_type
+process_cond(struct event *event, struct print_arg *top, char **tok)
+{
+ struct print_arg *arg, *left, *right;
+ enum event_type type;
+ char *token = NULL;
+
+ arg = malloc_or_die(sizeof(*arg));
+ memset(arg, 0, sizeof(*arg));
+
+ left = malloc_or_die(sizeof(*left));
+
+ right = malloc_or_die(sizeof(*right));
+
+ arg->type = PRINT_OP;
+ arg->op.left = left;
+ arg->op.right = right;
+
+ *tok = NULL;
+ type = process_arg(event, left, &token);
+ if (test_type_token(type, token, EVENT_OP, (char *)":"))
+ goto out_free;
+
+ arg->op.op = token;
+
+ type = process_arg(event, right, &token);
+
+ top->op.right = arg;
+
+ *tok = token;
+ return type;
+
+out_free:
+ free_token(*tok);
+ free(right);
+ free(left);
+ free_arg(arg);
+ return EVENT_ERROR;
+}
+
+static int get_op_prio(char *op)
+{
+ if (!op[1]) {
+ switch (op[0]) {
+ case '*':
+ case '/':
+ case '%':
+ return 6;
+ case '+':
+ case '-':
+ return 7;
+ /* '>>' and '<<' are 8 */
+ case '<':
+ case '>':
+ return 9;
+ /* '==' and '!=' are 10 */
+ case '&':
+ return 11;
+ case '^':
+ return 12;
+ case '|':
+ return 13;
+ case '?':
+ return 16;
+ default:
+ die("unknown op '%c'", op[0]);
+ return -1;
+ }
+ } else {
+ if (strcmp(op, "++") == 0 ||
+ strcmp(op, "--") == 0) {
+ return 3;
+ } else if (strcmp(op, ">>") == 0 ||
+ strcmp(op, "<<") == 0) {
+ return 8;
+ } else if (strcmp(op, ">=") == 0 ||
+ strcmp(op, "<=") == 0) {
+ return 9;
+ } else if (strcmp(op, "==") == 0 ||
+ strcmp(op, "!=") == 0) {
+ return 10;
+ } else if (strcmp(op, "&&") == 0) {
+ return 14;
+ } else if (strcmp(op, "||") == 0) {
+ return 15;
+ } else {
+ die("unknown op '%s'", op);
+ return -1;
+ }
+ }
+}
+
+static void set_op_prio(struct print_arg *arg)
+{
+
+ /* single ops are the greatest */
+ if (!arg->op.left || arg->op.left->type == PRINT_NULL) {
+ arg->op.prio = 0;
+ return;
+ }
+
+ arg->op.prio = get_op_prio(arg->op.op);
+}
+
+static enum event_type
+process_op(struct event *event, struct print_arg *arg, char **tok)
+{
+ struct print_arg *left, *right = NULL;
+ enum event_type type;
+ char *token;
+
+ /* the op is passed in via tok */
+ token = *tok;
+
+ if (arg->type == PRINT_OP && !arg->op.left) {
+ /* handle single op */
+ if (token[1]) {
+ die("bad op token %s", token);
+ return EVENT_ERROR;
+ }
+ switch (token[0]) {
+ case '!':
+ case '+':
+ case '-':
+ break;
+ default:
+ die("bad op token %s", token);
+ return EVENT_ERROR;
+ }
+
+ /* make an empty left */
+ left = malloc_or_die(sizeof(*left));
+ left->type = PRINT_NULL;
+ arg->op.left = left;
+
+ right = malloc_or_die(sizeof(*right));
+ arg->op.right = right;
+
+ type = process_arg(event, right, tok);
+
+ } else if (strcmp(token, "?") == 0) {
+
+ left = malloc_or_die(sizeof(*left));
+ /* copy the top arg to the left */
+ *left = *arg;
+
+ arg->type = PRINT_OP;
+ arg->op.op = token;
+ arg->op.left = left;
+ arg->op.prio = 0;
+
+ type = process_cond(event, arg, tok);
+
+ } else if (strcmp(token, ">>") == 0 ||
+ strcmp(token, "<<") == 0 ||
+ strcmp(token, "&") == 0 ||
+ strcmp(token, "|") == 0 ||
+ strcmp(token, "&&") == 0 ||
+ strcmp(token, "||") == 0 ||
+ strcmp(token, "-") == 0 ||
+ strcmp(token, "+") == 0 ||
+ strcmp(token, "*") == 0 ||
+ strcmp(token, "^") == 0 ||
+ strcmp(token, "/") == 0 ||
+ strcmp(token, "==") == 0 ||
+ strcmp(token, "!=") == 0) {
+
+ left = malloc_or_die(sizeof(*left));
+
+ /* copy the top arg to the left */
+ *left = *arg;
+
+ arg->type = PRINT_OP;
+ arg->op.op = token;
+ arg->op.left = left;
+
+ set_op_prio(arg);
+
+ right = malloc_or_die(sizeof(*right));
+
+ type = process_arg(event, right, tok);
+
+ arg->op.right = right;
+
+ } else {
+ die("unknown op '%s'", token);
+ /* the arg is now the left side */
+ return EVENT_NONE;
+ }
+
+
+ if (type == EVENT_OP) {
+ int prio;
+
+ /* higher prios need to be closer to the root */
+ prio = get_op_prio(*tok);
+
+ if (prio > arg->op.prio)
+ return process_op(event, arg, tok);
+
+ return process_op(event, right, tok);
+ }
+
+ return type;
+}
+
+static enum event_type
+process_entry(struct event *event __unused, struct print_arg *arg,
+ char **tok)
+{
+ enum event_type type;
+ char *field;
+ char *token;
+
+ if (read_expected(EVENT_OP, (char *)"->") < 0)
+ return EVENT_ERROR;
+
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ goto fail;
+ field = token;
+
+ arg->type = PRINT_FIELD;
+ arg->field.name = field;
+
+ type = read_token(&token);
+ *tok = token;
+
+ return type;
+
+fail:
+ free_token(token);
+ return EVENT_ERROR;
+}
+
+static char *arg_eval (struct print_arg *arg);
+
+static long long arg_num_eval(struct print_arg *arg)
+{
+ long long left, right;
+ long long val = 0;
+
+ switch (arg->type) {
+ case PRINT_ATOM:
+ val = strtoll(arg->atom.atom, NULL, 0);
+ break;
+ case PRINT_TYPE:
+ val = arg_num_eval(arg->typecast.item);
+ break;
+ case PRINT_OP:
+ switch (arg->op.op[0]) {
+ case '|':
+ left = arg_num_eval(arg->op.left);
+ right = arg_num_eval(arg->op.right);
+ if (arg->op.op[1])
+ val = left || right;
+ else
+ val = left | right;
+ break;
+ case '&':
+ left = arg_num_eval(arg->op.left);
+ right = arg_num_eval(arg->op.right);
+ if (arg->op.op[1])
+ val = left && right;
+ else
+ val = left & right;
+ break;
+ case '<':
+ left = arg_num_eval(arg->op.left);
+ right = arg_num_eval(arg->op.right);
+ switch (arg->op.op[1]) {
+ case 0:
+ val = left < right;
+ break;
+ case '<':
+ val = left << right;
+ break;
+ case '=':
+ val = left <= right;
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+ case '>':
+ left = arg_num_eval(arg->op.left);
+ right = arg_num_eval(arg->op.right);
+ switch (arg->op.op[1]) {
+ case 0:
+ val = left > right;
+ break;
+ case '>':
+ val = left >> right;
+ break;
+ case '=':
+ val = left >= right;
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+ case '=':
+ left = arg_num_eval(arg->op.left);
+ right = arg_num_eval(arg->op.right);
+
+ if (arg->op.op[1] != '=')
+ die("unknown op '%s'", arg->op.op);
+
+ val = left == right;
+ break;
+ case '!':
+ left = arg_num_eval(arg->op.left);
+ right = arg_num_eval(arg->op.right);
+
+ switch (arg->op.op[1]) {
+ case '=':
+ val = left != right;
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+
+ case PRINT_NULL:
+ case PRINT_FIELD ... PRINT_SYMBOL:
+ case PRINT_STRING:
+ default:
+ die("invalid eval type %d", arg->type);
+
+ }
+ return val;
+}
+
+static char *arg_eval (struct print_arg *arg)
+{
+ long long val;
+ static char buf[20];
+
+ switch (arg->type) {
+ case PRINT_ATOM:
+ return arg->atom.atom;
+ case PRINT_TYPE:
+ return arg_eval(arg->typecast.item);
+ case PRINT_OP:
+ val = arg_num_eval(arg);
+ sprintf(buf, "%lld", val);
+ return buf;
+
+ case PRINT_NULL:
+ case PRINT_FIELD ... PRINT_SYMBOL:
+ case PRINT_STRING:
+ default:
+ die("invalid eval type %d", arg->type);
+ break;
+ }
+
+ return NULL;
+}
+
+static enum event_type
+process_fields(struct event *event, struct print_flag_sym **list, char **tok)
+{
+ enum event_type type;
+ struct print_arg *arg = NULL;
+ struct print_flag_sym *field;
+ char *token = NULL;
+ char *value;
+
+ do {
+ free_token(token);
+ type = read_token_item(&token);
+ if (test_type_token(type, token, EVENT_OP, (char *)"{"))
+ break;
+
+ arg = malloc_or_die(sizeof(*arg));
+
+ free_token(token);
+ type = process_arg(event, arg, &token);
+ if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+ goto out_free;
+
+ field = malloc_or_die(sizeof(*field));
+ memset(field, 0, sizeof(field));
+
+ value = arg_eval(arg);
+ field->value = strdup(value);
+
+ free_token(token);
+ type = process_arg(event, arg, &token);
+ if (test_type_token(type, token, EVENT_OP, (char *)"}"))
+ goto out_free;
+
+ value = arg_eval(arg);
+ field->str = strdup(value);
+ free_arg(arg);
+ arg = NULL;
+
+ *list = field;
+ list = &field->next;
+
+ free_token(token);
+ type = read_token_item(&token);
+ } while (type == EVENT_DELIM && strcmp(token, ",") == 0);
+
+ *tok = token;
+ return type;
+
+out_free:
+ free_arg(arg);
+ free_token(token);
+
+ return EVENT_ERROR;
+}
+
+static enum event_type
+process_flags(struct event *event, struct print_arg *arg, char **tok)
+{
+ struct print_arg *field;
+ enum event_type type;
+ char *token;
+
+ memset(arg, 0, sizeof(*arg));
+ arg->type = PRINT_FLAGS;
+
+ if (read_expected_item(EVENT_DELIM, (char *)"(") < 0)
+ return EVENT_ERROR;
+
+ field = malloc_or_die(sizeof(*field));
+
+ type = process_arg(event, field, &token);
+ if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+ goto out_free;
+
+ arg->flags.field = field;
+
+ type = read_token_item(&token);
+ if (event_item_type(type)) {
+ arg->flags.delim = token;
+ type = read_token_item(&token);
+ }
+
+ if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+ goto out_free;
+
+ type = process_fields(event, &arg->flags.flags, &token);
+ if (test_type_token(type, token, EVENT_DELIM, (char *)")"))
+ goto out_free;
+
+ free_token(token);
+ type = read_token_item(tok);
+ return type;
+
+out_free:
+ free_token(token);
+ return EVENT_ERROR;
+}
+
+static enum event_type
+process_symbols(struct event *event, struct print_arg *arg, char **tok)
+{
+ struct print_arg *field;
+ enum event_type type;
+ char *token;
+
+ memset(arg, 0, sizeof(*arg));
+ arg->type = PRINT_SYMBOL;
+
+ if (read_expected_item(EVENT_DELIM, (char *)"(") < 0)
+ return EVENT_ERROR;
+
+ field = malloc_or_die(sizeof(*field));
+
+ type = process_arg(event, field, &token);
+ if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+ goto out_free;
+
+ arg->symbol.field = field;
+
+ type = process_fields(event, &arg->symbol.symbols, &token);
+ if (test_type_token(type, token, EVENT_DELIM, (char *)")"))
+ goto out_free;
+
+ free_token(token);
+ type = read_token_item(tok);
+ return type;
+
+out_free:
+ free_token(token);
+ return EVENT_ERROR;
+}
+
+static enum event_type
+process_paren(struct event *event, struct print_arg *arg, char **tok)
+{
+ struct print_arg *item_arg;
+ enum event_type type;
+ int ptr_cast = 0;
+ char *token;
+
+ type = process_arg(event, arg, &token);
+
+ if (type == EVENT_ERROR)
+ return EVENT_ERROR;
+
+ if (type == EVENT_OP) {
+ /* handle the ptr casts */
+ if (!strcmp(token, "*")) {
+ /*
+ * FIXME: should we zapp whitespaces before ')' ?
+ * (may require a peek_token_item())
+ */
+ if (__peek_char() == ')') {
+ ptr_cast = 1;
+ free_token(token);
+ type = read_token_item(&token);
+ }
+ }
+ if (!ptr_cast) {
+ type = process_op(event, arg, &token);
+
+ if (type == EVENT_ERROR)
+ return EVENT_ERROR;
+ }
+ }
+
+ if (test_type_token(type, token, EVENT_DELIM, (char *)")")) {
+ free_token(token);
+ return EVENT_ERROR;
+ }
+
+ free_token(token);
+ type = read_token_item(&token);
+
+ /*
+ * If the next token is an item or another open paren, then
+ * this was a typecast.
+ */
+ if (event_item_type(type) ||
+ (type == EVENT_DELIM && strcmp(token, "(") == 0)) {
+
+ /* make this a typecast and contine */
+
+ /* prevous must be an atom */
+ if (arg->type != PRINT_ATOM)
+ die("previous needed to be PRINT_ATOM");
+
+ item_arg = malloc_or_die(sizeof(*item_arg));
+
+ arg->type = PRINT_TYPE;
+ if (ptr_cast) {
+ char *old = arg->atom.atom;
+
+ arg->atom.atom = malloc_or_die(strlen(old + 3));
+ sprintf(arg->atom.atom, "%s *", old);
+ free(old);
+ }
+ arg->typecast.type = arg->atom.atom;
+ arg->typecast.item = item_arg;
+ type = process_arg_token(event, item_arg, &token, type);
+
+ }
+
+ *tok = token;
+ return type;
+}
+
+
+static enum event_type
+process_str(struct event *event __unused, struct print_arg *arg, char **tok)
+{
+ enum event_type type;
+ char *token;
+
+ if (read_expected(EVENT_DELIM, (char *)"(") < 0)
+ return EVENT_ERROR;
+
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ goto fail;
+
+ arg->type = PRINT_STRING;
+ arg->string.string = token;
+ arg->string.offset = -1;
+
+ if (read_expected(EVENT_DELIM, (char *)")") < 0)
+ return EVENT_ERROR;
+
+ type = read_token(&token);
+ *tok = token;
+
+ return type;
+fail:
+ free_token(token);
+ return EVENT_ERROR;
+}
+
+enum event_type
+process_arg_token(struct event *event, struct print_arg *arg,
+ char **tok, enum event_type type)
+{
+ char *token;
+ char *atom;
+
+ token = *tok;
+
+ switch (type) {
+ case EVENT_ITEM:
+ if (strcmp(token, "REC") == 0) {
+ free_token(token);
+ type = process_entry(event, arg, &token);
+ } else if (strcmp(token, "__print_flags") == 0) {
+ free_token(token);
+ type = process_flags(event, arg, &token);
+ } else if (strcmp(token, "__print_symbolic") == 0) {
+ free_token(token);
+ type = process_symbols(event, arg, &token);
+ } else if (strcmp(token, "__get_str") == 0) {
+ free_token(token);
+ type = process_str(event, arg, &token);
+ } else {
+ atom = token;
+ /* test the next token */
+ type = read_token_item(&token);
+
+ /* atoms can be more than one token long */
+ while (type == EVENT_ITEM) {
+ atom = realloc(atom, strlen(atom) + strlen(token) + 2);
+ strcat(atom, " ");
+ strcat(atom, token);
+ free_token(token);
+ type = read_token_item(&token);
+ }
+
+ /* todo, test for function */
+
+ arg->type = PRINT_ATOM;
+ arg->atom.atom = atom;
+ }
+ break;
+ case EVENT_DQUOTE:
+ case EVENT_SQUOTE:
+ arg->type = PRINT_ATOM;
+ arg->atom.atom = token;
+ type = read_token_item(&token);
+ break;
+ case EVENT_DELIM:
+ if (strcmp(token, "(") == 0) {
+ free_token(token);
+ type = process_paren(event, arg, &token);
+ break;
+ }
+ case EVENT_OP:
+ /* handle single ops */
+ arg->type = PRINT_OP;
+ arg->op.op = token;
+ arg->op.left = NULL;
+ type = process_op(event, arg, &token);
+
+ break;
+
+ case EVENT_ERROR ... EVENT_NEWLINE:
+ default:
+ die("unexpected type %d", type);
+ }
+ *tok = token;
+
+ return type;
+}
+
+static int event_read_print_args(struct event *event, struct print_arg **list)
+{
+ enum event_type type;
+ struct print_arg *arg;
+ char *token;
+ int args = 0;
+
+ do {
+ arg = malloc_or_die(sizeof(*arg));
+ memset(arg, 0, sizeof(*arg));
+
+ type = process_arg(event, arg, &token);
+
+ if (type == EVENT_ERROR) {
+ free_arg(arg);
+ return -1;
+ }
+
+ *list = arg;
+ args++;
+
+ if (type == EVENT_OP) {
+ type = process_op(event, arg, &token);
+ list = &arg->next;
+ continue;
+ }
+
+ if (type == EVENT_DELIM && strcmp(token, ",") == 0) {
+ free_token(token);
+ *list = arg;
+ list = &arg->next;
+ continue;
+ }
+ break;
+ } while (type != EVENT_NONE);
+
+ if (type != EVENT_NONE)
+ free_token(token);
+
+ return args;
+}
+
+static int event_read_print(struct event *event)
+{
+ enum event_type type;
+ char *token;
+ int ret;
+
+ if (read_expected_item(EVENT_ITEM, (char *)"print") < 0)
+ return -1;
+
+ if (read_expected(EVENT_ITEM, (char *)"fmt") < 0)
+ return -1;
+
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return -1;
+
+ if (read_expect_type(EVENT_DQUOTE, &token) < 0)
+ goto fail;
+
+ event->print_fmt.format = token;
+ event->print_fmt.args = NULL;
+
+ /* ok to have no arg */
+ type = read_token_item(&token);
+
+ if (type == EVENT_NONE)
+ return 0;
+
+ if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+ goto fail;
+
+ free_token(token);
+
+ ret = event_read_print_args(event, &event->print_fmt.args);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+
+ fail:
+ free_token(token);
+ return -1;
+}
+
+static struct format_field *
+find_common_field(struct event *event, const char *name)
+{
+ struct format_field *format;
+
+ for (format = event->format.common_fields;
+ format; format = format->next) {
+ if (strcmp(format->name, name) == 0)
+ break;
+ }
+
+ return format;
+}
+
+static struct format_field *
+find_field(struct event *event, const char *name)
+{
+ struct format_field *format;
+
+ for (format = event->format.fields;
+ format; format = format->next) {
+ if (strcmp(format->name, name) == 0)
+ break;
+ }
+
+ return format;
+}
+
+static struct format_field *
+find_any_field(struct event *event, const char *name)
+{
+ struct format_field *format;
+
+ format = find_common_field(event, name);
+ if (format)
+ return format;
+ return find_field(event, name);
+}
+
+static unsigned long long read_size(void *ptr, int size)
+{
+ switch (size) {
+ case 1:
+ return *(unsigned char *)ptr;
+ case 2:
+ return data2host2(ptr);
+ case 4:
+ return data2host4(ptr);
+ case 8:
+ return data2host8(ptr);
+ default:
+ /* BUG! */
+ return 0;
+ }
+}
+
+static int get_common_info(const char *type, int *offset, int *size)
+{
+ struct event *event;
+ struct format_field *field;
+
+ /*
+ * All events should have the same common elements.
+ * Pick any event to find where the type is;
+ */
+ if (!event_list)
+ die("no event_list!");
+
+ event = event_list;
+ field = find_common_field(event, type);
+ if (!field)
+ die("field '%s' not found", type);
+
+ *offset = field->offset;
+ *size = field->size;
+
+ return 0;
+}
+
+static int parse_common_type(void *data)
+{
+ static int type_offset;
+ static int type_size;
+ int ret;
+
+ if (!type_size) {
+ ret = get_common_info("common_type",
+ &type_offset,
+ &type_size);
+ if (ret < 0)
+ return ret;
+ }
+ return read_size(data + type_offset, type_size);
+}
+
+static int parse_common_pid(void *data)
+{
+ static int pid_offset;
+ static int pid_size;
+ int ret;
+
+ if (!pid_size) {
+ ret = get_common_info("common_pid",
+ &pid_offset,
+ &pid_size);
+ if (ret < 0)
+ return ret;
+ }
+
+ return read_size(data + pid_offset, pid_size);
+}
+
+static struct event *find_event(int id)
+{
+ struct event *event;
+
+ for (event = event_list; event; event = event->next) {
+ if (event->id == id)
+ break;
+ }
+ return event;
+}
+
+static unsigned long long eval_num_arg(void *data, int size,
+ struct event *event, struct print_arg *arg)
+{
+ unsigned long long val = 0;
+ unsigned long long left, right;
+
+ switch (arg->type) {
+ case PRINT_NULL:
+ /* ?? */
+ return 0;
+ case PRINT_ATOM:
+ return strtoull(arg->atom.atom, NULL, 0);
+ case PRINT_FIELD:
+ if (!arg->field.field) {
+ arg->field.field = find_any_field(event, arg->field.name);
+ if (!arg->field.field)
+ die("field %s not found", arg->field.name);
+ }
+ /* must be a number */
+ val = read_size(data + arg->field.field->offset,
+ arg->field.field->size);
+ break;
+ case PRINT_FLAGS:
+ case PRINT_SYMBOL:
+ break;
+ case PRINT_TYPE:
+ return eval_num_arg(data, size, event, arg->typecast.item);
+ case PRINT_STRING:
+ return 0;
+ break;
+ case PRINT_OP:
+ left = eval_num_arg(data, size, event, arg->op.left);
+ right = eval_num_arg(data, size, event, arg->op.right);
+ switch (arg->op.op[0]) {
+ case '|':
+ if (arg->op.op[1])
+ val = left || right;
+ else
+ val = left | right;
+ break;
+ case '&':
+ if (arg->op.op[1])
+ val = left && right;
+ else
+ val = left & right;
+ break;
+ case '<':
+ switch (arg->op.op[1]) {
+ case 0:
+ val = left < right;
+ break;
+ case '<':
+ val = left << right;
+ break;
+ case '=':
+ val = left <= right;
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+ case '>':
+ switch (arg->op.op[1]) {
+ case 0:
+ val = left > right;
+ break;
+ case '>':
+ val = left >> right;
+ break;
+ case '=':
+ val = left >= right;
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+ case '=':
+ if (arg->op.op[1] != '=')
+ die("unknown op '%s'", arg->op.op);
+ val = left == right;
+ break;
+ default:
+ die("unknown op '%s'", arg->op.op);
+ }
+ break;
+ default: /* not sure what to do there */
+ return 0;
+ }
+ return val;
+}
+
+struct flag {
+ const char *name;
+ unsigned long long value;
+};
+
+static const struct flag flags[] = {
+ { "HI_SOFTIRQ", 0 },
+ { "TIMER_SOFTIRQ", 1 },
+ { "NET_TX_SOFTIRQ", 2 },
+ { "NET_RX_SOFTIRQ", 3 },
+ { "BLOCK_SOFTIRQ", 4 },
+ { "TASKLET_SOFTIRQ", 5 },
+ { "SCHED_SOFTIRQ", 6 },
+ { "HRTIMER_SOFTIRQ", 7 },
+ { "RCU_SOFTIRQ", 8 },
+
+ { "HRTIMER_NORESTART", 0 },
+ { "HRTIMER_RESTART", 1 },
+};
+
+static unsigned long long eval_flag(const char *flag)
+{
+ int i;
+
+ /*
+ * Some flags in the format files do not get converted.
+ * If the flag is not numeric, see if it is something that
+ * we already know about.
+ */
+ if (isdigit(flag[0]))
+ return strtoull(flag, NULL, 0);
+
+ for (i = 0; i < (int)(sizeof(flags)/sizeof(flags[0])); i++)
+ if (strcmp(flags[i].name, flag) == 0)
+ return flags[i].value;
+
+ return 0;
+}
+
+static void print_str_arg(void *data, int size,
+ struct event *event, struct print_arg *arg)
+{
+ struct print_flag_sym *flag;
+ unsigned long long val, fval;
+ char *str;
+ int print;
+
+ switch (arg->type) {
+ case PRINT_NULL:
+ /* ?? */
+ return;
+ case PRINT_ATOM:
+ printf("%s", arg->atom.atom);
+ return;
+ case PRINT_FIELD:
+ if (!arg->field.field) {
+ arg->field.field = find_any_field(event, arg->field.name);
+ if (!arg->field.field)
+ die("field %s not found", arg->field.name);
+ }
+ str = malloc_or_die(arg->field.field->size + 1);
+ memcpy(str, data + arg->field.field->offset,
+ arg->field.field->size);
+ str[arg->field.field->size] = 0;
+ printf("%s", str);
+ free(str);
+ break;
+ case PRINT_FLAGS:
+ val = eval_num_arg(data, size, event, arg->flags.field);
+ print = 0;
+ for (flag = arg->flags.flags; flag; flag = flag->next) {
+ fval = eval_flag(flag->value);
+ if (!val && !fval) {
+ printf("%s", flag->str);
+ break;
+ }
+ if (fval && (val & fval) == fval) {
+ if (print && arg->flags.delim)
+ printf("%s", arg->flags.delim);
+ printf("%s", flag->str);
+ print = 1;
+ val &= ~fval;
+ }
+ }
+ break;
+ case PRINT_SYMBOL:
+ val = eval_num_arg(data, size, event, arg->symbol.field);
+ for (flag = arg->symbol.symbols; flag; flag = flag->next) {
+ fval = eval_flag(flag->value);
+ if (val == fval) {
+ printf("%s", flag->str);
+ break;
+ }
+ }
+ break;
+
+ case PRINT_TYPE:
+ break;
+ case PRINT_STRING: {
+ int str_offset;
+
+ if (arg->string.offset == -1) {
+ struct format_field *f;
+
+ f = find_any_field(event, arg->string.string);
+ arg->string.offset = f->offset;
+ }
+ str_offset = *(int *)(data + arg->string.offset);
+ str_offset &= 0xffff;
+ printf("%s", ((char *)data) + str_offset);
+ break;
+ }
+ case PRINT_OP:
+ /*
+ * The only op for string should be ? :
+ */
+ if (arg->op.op[0] != '?')
+ return;
+ val = eval_num_arg(data, size, event, arg->op.left);
+ if (val)
+ print_str_arg(data, size, event, arg->op.right->op.left);
+ else
+ print_str_arg(data, size, event, arg->op.right->op.right);
+ break;
+ default:
+ /* well... */
+ break;
+ }
+}
+
+static struct print_arg *make_bprint_args(char *fmt, void *data, int size, struct event *event)
+{
+ static struct format_field *field, *ip_field;
+ struct print_arg *args, *arg, **next;
+ unsigned long long ip, val;
+ char *ptr;
+ void *bptr;
+
+ if (!field) {
+ field = find_field(event, "buf");
+ if (!field)
+ die("can't find buffer field for binary printk");
+ ip_field = find_field(event, "ip");
+ if (!ip_field)
+ die("can't find ip field for binary printk");
+ }
+
+ ip = read_size(data + ip_field->offset, ip_field->size);
+
+ /*
+ * The first arg is the IP pointer.
+ */
+ args = malloc_or_die(sizeof(*args));
+ arg = args;
+ arg->next = NULL;
+ next = &arg->next;
+
+ arg->type = PRINT_ATOM;
+ arg->atom.atom = malloc_or_die(32);
+ sprintf(arg->atom.atom, "%lld", ip);
+
+ /* skip the first "%pf : " */
+ for (ptr = fmt + 6, bptr = data + field->offset;
+ bptr < data + size && *ptr; ptr++) {
+ int ls = 0;
+
+ if (*ptr == '%') {
+ process_again:
+ ptr++;
+ switch (*ptr) {
+ case '%':
+ break;
+ case 'l':
+ ls++;
+ goto process_again;
+ case 'L':
+ ls = 2;
+ goto process_again;
+ case '0' ... '9':
+ goto process_again;
+ case 'p':
+ ls = 1;
+ /* fall through */
+ case 'd':
+ case 'u':
+ case 'x':
+ case 'i':
+ bptr = (void *)(((unsigned long)bptr + (long_size - 1)) &
+ ~(long_size - 1));
+ switch (ls) {
+ case 0:
+ case 1:
+ ls = long_size;
+ break;
+ case 2:
+ ls = 8;
+ default:
+ break;
+ }
+ val = read_size(bptr, ls);
+ bptr += ls;
+ arg = malloc_or_die(sizeof(*arg));
+ arg->next = NULL;
+ arg->type = PRINT_ATOM;
+ arg->atom.atom = malloc_or_die(32);
+ sprintf(arg->atom.atom, "%lld", val);
+ *next = arg;
+ next = &arg->next;
+ break;
+ case 's':
+ arg = malloc_or_die(sizeof(*arg));
+ arg->next = NULL;
+ arg->type = PRINT_STRING;
+ arg->string.string = strdup(bptr);
+ bptr += strlen(bptr) + 1;
+ *next = arg;
+ next = &arg->next;
+ default:
+ break;
+ }
+ }
+ }
+
+ return args;
+}
+
+static void free_args(struct print_arg *args)
+{
+ struct print_arg *next;
+
+ while (args) {
+ next = args->next;
+
+ if (args->type == PRINT_ATOM)
+ free(args->atom.atom);
+ else
+ free(args->string.string);
+ free(args);
+ args = next;
+ }
+}
+
+static char *get_bprint_format(void *data, int size __unused, struct event *event)
+{
+ unsigned long long addr;
+ static struct format_field *field;
+ struct printk_map *printk;
+ char *format;
+ char *p;
+
+ if (!field) {
+ field = find_field(event, "fmt");
+ if (!field)
+ die("can't find format field for binary printk");
+ printf("field->offset = %d size=%d\n", field->offset, field->size);
+ }
+
+ addr = read_size(data + field->offset, field->size);
+
+ printk = find_printk(addr);
+ if (!printk) {
+ format = malloc_or_die(45);
+ sprintf(format, "%%pf : (NO FORMAT FOUND at %llx)\n",
+ addr);
+ return format;
+ }
+
+ p = printk->printk;
+ /* Remove any quotes. */
+ if (*p == '"')
+ p++;
+ format = malloc_or_die(strlen(p) + 10);
+ sprintf(format, "%s : %s", "%pf", p);
+ /* remove ending quotes and new line since we will add one too */
+ p = format + strlen(format) - 1;
+ if (*p == '"')
+ *p = 0;
+
+ p -= 2;
+ if (strcmp(p, "\\n") == 0)
+ *p = 0;
+
+ return format;
+}
+
+static void pretty_print(void *data, int size, struct event *event)
+{
+ struct print_fmt *print_fmt = &event->print_fmt;
+ struct print_arg *arg = print_fmt->args;
+ struct print_arg *args = NULL;
+ const char *ptr = print_fmt->format;
+ unsigned long long val;
+ struct func_map *func;
+ const char *saveptr;
+ char *bprint_fmt = NULL;
+ char format[32];
+ int show_func;
+ int len;
+ int ls;
+
+ if (event->flags & EVENT_FL_ISFUNC)
+ ptr = " %pF <-- %pF";
+
+ if (event->flags & EVENT_FL_ISBPRINT) {
+ bprint_fmt = get_bprint_format(data, size, event);
+ args = make_bprint_args(bprint_fmt, data, size, event);
+ arg = args;
+ ptr = bprint_fmt;
+ }
+
+ for (; *ptr; ptr++) {
+ ls = 0;
+ if (*ptr == '%') {
+ saveptr = ptr;
+ show_func = 0;
+ cont_process:
+ ptr++;
+ switch (*ptr) {
+ case '%':
+ printf("%%");
+ break;
+ case 'l':
+ ls++;
+ goto cont_process;
+ case 'L':
+ ls = 2;
+ goto cont_process;
+ case 'z':
+ case 'Z':
+ case '0' ... '9':
+ goto cont_process;
+ case 'p':
+ if (long_size == 4)
+ ls = 1;
+ else
+ ls = 2;
+
+ if (*(ptr+1) == 'F' ||
+ *(ptr+1) == 'f') {
+ ptr++;
+ show_func = *ptr;
+ }
+
+ /* fall through */
+ case 'd':
+ case 'i':
+ case 'x':
+ case 'X':
+ case 'u':
+ if (!arg)
+ die("no argument match");
+
+ len = ((unsigned long)ptr + 1) -
+ (unsigned long)saveptr;
+
+ /* should never happen */
+ if (len > 32)
+ die("bad format!");
+
+ memcpy(format, saveptr, len);
+ format[len] = 0;
+
+ val = eval_num_arg(data, size, event, arg);
+ arg = arg->next;
+
+ if (show_func) {
+ func = find_func(val);
+ if (func) {
+ printf("%s", func->func);
+ if (show_func == 'F')
+ printf("+0x%llx",
+ val - func->addr);
+ break;
+ }
+ }
+ switch (ls) {
+ case 0:
+ printf(format, (int)val);
+ break;
+ case 1:
+ printf(format, (long)val);
+ break;
+ case 2:
+ printf(format, (long long)val);
+ break;
+ default:
+ die("bad count (%d)", ls);
+ }
+ break;
+ case 's':
+ if (!arg)
+ die("no matching argument");
+
+ print_str_arg(data, size, event, arg);
+ arg = arg->next;
+ break;
+ default:
+ printf(">%c<", *ptr);
+
+ }
+ } else
+ printf("%c", *ptr);
+ }
+
+ if (args) {
+ free_args(args);
+ free(bprint_fmt);
+ }
+}
+
+static inline int log10_cpu(int nb)
+{
+ if (nb / 100)
+ return 3;
+ if (nb / 10)
+ return 2;
+ return 1;
+}
+
+/* taken from Linux, written by Frederic Weisbecker */
+static void print_graph_cpu(int cpu)
+{
+ int i;
+ int log10_this = log10_cpu(cpu);
+ int log10_all = log10_cpu(cpus);
+
+
+ /*
+ * Start with a space character - to make it stand out
+ * to the right a bit when trace output is pasted into
+ * email:
+ */
+ printf(" ");
+
+ /*
+ * Tricky - we space the CPU field according to the max
+ * number of online CPUs. On a 2-cpu system it would take
+ * a maximum of 1 digit - on a 128 cpu system it would
+ * take up to 3 digits:
+ */
+ for (i = 0; i < log10_all - log10_this; i++)
+ printf(" ");
+
+ printf("%d) ", cpu);
+}
+
+#define TRACE_GRAPH_PROCINFO_LENGTH 14
+#define TRACE_GRAPH_INDENT 2
+
+static void print_graph_proc(int pid, const char *comm)
+{
+ /* sign + log10(MAX_INT) + '\0' */
+ char pid_str[11];
+ int spaces = 0;
+ int len;
+ int i;
+
+ sprintf(pid_str, "%d", pid);
+
+ /* 1 stands for the "-" character */
+ len = strlen(comm) + strlen(pid_str) + 1;
+
+ if (len < TRACE_GRAPH_PROCINFO_LENGTH)
+ spaces = TRACE_GRAPH_PROCINFO_LENGTH - len;
+
+ /* First spaces to align center */
+ for (i = 0; i < spaces / 2; i++)
+ printf(" ");
+
+ printf("%s-%s", comm, pid_str);
+
+ /* Last spaces to align center */
+ for (i = 0; i < spaces - (spaces / 2); i++)
+ printf(" ");
+}
+
+static struct record *
+get_return_for_leaf(int cpu, int cur_pid, unsigned long long cur_func,
+ struct record *next)
+{
+ struct format_field *field;
+ struct event *event;
+ unsigned long val;
+ int type;
+ int pid;
+
+ type = parse_common_type(next->data);
+ event = find_event(type);
+ if (!event)
+ return NULL;
+
+ if (!(event->flags & EVENT_FL_ISFUNCRET))
+ return NULL;
+
+ pid = parse_common_pid(next->data);
+ field = find_field(event, "func");
+ if (!field)
+ die("function return does not have field func");
+
+ val = read_size(next->data + field->offset, field->size);
+
+ if (cur_pid != pid || cur_func != val)
+ return NULL;
+
+ /* this is a leaf, now advance the iterator */
+ return trace_read_data(cpu);
+}
+
+/* Signal a overhead of time execution to the output */
+static void print_graph_overhead(unsigned long long duration)
+{
+ /* Non nested entry or return */
+ if (duration == ~0ULL)
+ return (void)printf(" ");
+
+ /* Duration exceeded 100 msecs */
+ if (duration > 100000ULL)
+ return (void)printf("! ");
+
+ /* Duration exceeded 10 msecs */
+ if (duration > 10000ULL)
+ return (void)printf("+ ");
+
+ printf(" ");
+}
+
+static void print_graph_duration(unsigned long long duration)
+{
+ unsigned long usecs = duration / 1000;
+ unsigned long nsecs_rem = duration % 1000;
+ /* log10(ULONG_MAX) + '\0' */
+ char msecs_str[21];
+ char nsecs_str[5];
+ int len;
+ int i;
+
+ sprintf(msecs_str, "%lu", usecs);
+
+ /* Print msecs */
+ len = printf("%lu", usecs);
+
+ /* Print nsecs (we don't want to exceed 7 numbers) */
+ if (len < 7) {
+ snprintf(nsecs_str, 8 - len, "%03lu", nsecs_rem);
+ len += printf(".%s", nsecs_str);
+ }
+
+ printf(" us ");
+
+ /* Print remaining spaces to fit the row's width */
+ for (i = len; i < 7; i++)
+ printf(" ");
+
+ printf("| ");
+}
+
+static void
+print_graph_entry_leaf(struct event *event, void *data, struct record *ret_rec)
+{
+ unsigned long long rettime, calltime;
+ unsigned long long duration, depth;
+ unsigned long long val;
+ struct format_field *field;
+ struct func_map *func;
+ struct event *ret_event;
+ int type;
+ int i;
+
+ type = parse_common_type(ret_rec->data);
+ ret_event = find_event(type);
+
+ field = find_field(ret_event, "rettime");
+ if (!field)
+ die("can't find rettime in return graph");
+ rettime = read_size(ret_rec->data + field->offset, field->size);
+
+ field = find_field(ret_event, "calltime");
+ if (!field)
+ die("can't find rettime in return graph");
+ calltime = read_size(ret_rec->data + field->offset, field->size);
+
+ duration = rettime - calltime;
+
+ /* Overhead */
+ print_graph_overhead(duration);
+
+ /* Duration */
+ print_graph_duration(duration);
+
+ field = find_field(event, "depth");
+ if (!field)
+ die("can't find depth in entry graph");
+ depth = read_size(data + field->offset, field->size);
+
+ /* Function */
+ for (i = 0; i < (int)(depth * TRACE_GRAPH_INDENT); i++)
+ printf(" ");
+
+ field = find_field(event, "func");
+ if (!field)
+ die("can't find func in entry graph");
+ val = read_size(data + field->offset, field->size);
+ func = find_func(val);
+
+ if (func)
+ printf("%s();", func->func);
+ else
+ printf("%llx();", val);
+}
+
+static void print_graph_nested(struct event *event, void *data)
+{
+ struct format_field *field;
+ unsigned long long depth;
+ unsigned long long val;
+ struct func_map *func;
+ int i;
+
+ /* No overhead */
+ print_graph_overhead(-1);
+
+ /* No time */
+ printf(" | ");
+
+ field = find_field(event, "depth");
+ if (!field)
+ die("can't find depth in entry graph");
+ depth = read_size(data + field->offset, field->size);
+
+ /* Function */
+ for (i = 0; i < (int)(depth * TRACE_GRAPH_INDENT); i++)
+ printf(" ");
+
+ field = find_field(event, "func");
+ if (!field)
+ die("can't find func in entry graph");
+ val = read_size(data + field->offset, field->size);
+ func = find_func(val);
+
+ if (func)
+ printf("%s() {", func->func);
+ else
+ printf("%llx() {", val);
+}
+
+static void
+pretty_print_func_ent(void *data, int size, struct event *event,
+ int cpu, int pid, const char *comm,
+ unsigned long secs, unsigned long usecs)
+{
+ struct format_field *field;
+ struct record *rec;
+ void *copy_data;
+ unsigned long val;
+
+ printf("%5lu.%06lu | ", secs, usecs);
+
+ print_graph_cpu(cpu);
+ print_graph_proc(pid, comm);
+
+ printf(" | ");
+
+ field = find_field(event, "func");
+ if (!field)
+ die("function entry does not have func field");
+
+ val = read_size(data + field->offset, field->size);
+
+ /*
+ * peek_data may unmap the data pointer. Copy it first.
+ */
+ copy_data = malloc_or_die(size);
+ memcpy(copy_data, data, size);
+ data = copy_data;
+
+ rec = trace_peek_data(cpu);
+ if (rec) {
+ rec = get_return_for_leaf(cpu, pid, val, rec);
+ if (rec) {
+ print_graph_entry_leaf(event, data, rec);
+ goto out_free;
+ }
+ }
+ print_graph_nested(event, data);
+out_free:
+ free(data);
+}
+
+static void
+pretty_print_func_ret(void *data, int size __unused, struct event *event,
+ int cpu, int pid, const char *comm,
+ unsigned long secs, unsigned long usecs)
+{
+ unsigned long long rettime, calltime;
+ unsigned long long duration, depth;
+ struct format_field *field;
+ int i;
+
+ printf("%5lu.%06lu | ", secs, usecs);
+
+ print_graph_cpu(cpu);
+ print_graph_proc(pid, comm);
+
+ printf(" | ");
+
+ field = find_field(event, "rettime");
+ if (!field)
+ die("can't find rettime in return graph");
+ rettime = read_size(data + field->offset, field->size);
+
+ field = find_field(event, "calltime");
+ if (!field)
+ die("can't find calltime in return graph");
+ calltime = read_size(data + field->offset, field->size);
+
+ duration = rettime - calltime;
+
+ /* Overhead */
+ print_graph_overhead(duration);
+
+ /* Duration */
+ print_graph_duration(duration);
+
+ field = find_field(event, "depth");
+ if (!field)
+ die("can't find depth in entry graph");
+ depth = read_size(data + field->offset, field->size);
+
+ /* Function */
+ for (i = 0; i < (int)(depth * TRACE_GRAPH_INDENT); i++)
+ printf(" ");
+
+ printf("}");
+}
+
+static void
+pretty_print_func_graph(void *data, int size, struct event *event,
+ int cpu, int pid, const char *comm,
+ unsigned long secs, unsigned long usecs)
+{
+ if (event->flags & EVENT_FL_ISFUNCENT)
+ pretty_print_func_ent(data, size, event,
+ cpu, pid, comm, secs, usecs);
+ else if (event->flags & EVENT_FL_ISFUNCRET)
+ pretty_print_func_ret(data, size, event,
+ cpu, pid, comm, secs, usecs);
+ printf("\n");
+}
+
+void print_event(int cpu, void *data, int size, unsigned long long nsecs,
+ char *comm)
+{
+ struct event *event;
+ unsigned long secs;
+ unsigned long usecs;
+ int type;
+ int pid;
+
+ secs = nsecs / NSECS_PER_SEC;
+ nsecs -= secs * NSECS_PER_SEC;
+ usecs = nsecs / NSECS_PER_USEC;
+
+ type = parse_common_type(data);
+
+ event = find_event(type);
+ if (!event)
+ die("ug! no event found for type %d", type);
+
+ pid = parse_common_pid(data);
+
+ if (event->flags & (EVENT_FL_ISFUNCENT | EVENT_FL_ISFUNCRET))
+ return pretty_print_func_graph(data, size, event, cpu,
+ pid, comm, secs, usecs);
+
+ printf("%16s-%-5d [%03d] %5lu.%09Lu: %s: ",
+ comm, pid, cpu,
+ secs, nsecs, event->name);
+
+ pretty_print(data, size, event);
+ printf("\n");
+}
+
+static void print_fields(struct print_flag_sym *field)
+{
+ printf("{ %s, %s }", field->value, field->str);
+ if (field->next) {
+ printf(", ");
+ print_fields(field->next);
+ }
+}
+
+static void print_args(struct print_arg *args)
+{
+ int print_paren = 1;
+
+ switch (args->type) {
+ case PRINT_NULL:
+ printf("null");
+ break;
+ case PRINT_ATOM:
+ printf("%s", args->atom.atom);
+ break;
+ case PRINT_FIELD:
+ printf("REC->%s", args->field.name);
+ break;
+ case PRINT_FLAGS:
+ printf("__print_flags(");
+ print_args(args->flags.field);
+ printf(", %s, ", args->flags.delim);
+ print_fields(args->flags.flags);
+ printf(")");
+ break;
+ case PRINT_SYMBOL:
+ printf("__print_symbolic(");
+ print_args(args->symbol.field);
+ printf(", ");
+ print_fields(args->symbol.symbols);
+ printf(")");
+ break;
+ case PRINT_STRING:
+ printf("__get_str(%s)", args->string.string);
+ break;
+ case PRINT_TYPE:
+ printf("(%s)", args->typecast.type);
+ print_args(args->typecast.item);
+ break;
+ case PRINT_OP:
+ if (strcmp(args->op.op, ":") == 0)
+ print_paren = 0;
+ if (print_paren)
+ printf("(");
+ print_args(args->op.left);
+ printf(" %s ", args->op.op);
+ print_args(args->op.right);
+ if (print_paren)
+ printf(")");
+ break;
+ default:
+ /* we should warn... */
+ return;
+ }
+ if (args->next) {
+ printf("\n");
+ print_args(args->next);
+ }
+}
+
+static void parse_header_field(char *type,
+ int *offset, int *size)
+{
+ char *token;
+
+ if (read_expected(EVENT_ITEM, (char *)"field") < 0)
+ return;
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return;
+ /* type */
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ return;
+ free_token(token);
+
+ if (read_expected(EVENT_ITEM, type) < 0)
+ return;
+ if (read_expected(EVENT_OP, (char *)";") < 0)
+ return;
+ if (read_expected(EVENT_ITEM, (char *)"offset") < 0)
+ return;
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return;
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ return;
+ *offset = atoi(token);
+ free_token(token);
+ if (read_expected(EVENT_OP, (char *)";") < 0)
+ return;
+ if (read_expected(EVENT_ITEM, (char *)"size") < 0)
+ return;
+ if (read_expected(EVENT_OP, (char *)":") < 0)
+ return;
+ if (read_expect_type(EVENT_ITEM, &token) < 0)
+ return;
+ *size = atoi(token);
+ free_token(token);
+ if (read_expected(EVENT_OP, (char *)";") < 0)
+ return;
+ if (read_expect_type(EVENT_NEWLINE, &token) < 0)
+ return;
+ free_token(token);
+}
+
+int parse_header_page(char *buf, unsigned long size)
+{
+ init_input_buf(buf, size);
+
+ parse_header_field((char *)"timestamp", &header_page_ts_offset,
+ &header_page_ts_size);
+ parse_header_field((char *)"commit", &header_page_size_offset,
+ &header_page_size_size);
+ parse_header_field((char *)"data", &header_page_data_offset,
+ &header_page_data_size);
+
+ return 0;
+}
+
+int parse_ftrace_file(char *buf, unsigned long size)
+{
+ struct format_field *field;
+ struct print_arg *arg, **list;
+ struct event *event;
+ int ret;
+
+ init_input_buf(buf, size);
+
+ event = alloc_event();
+ if (!event)
+ return -ENOMEM;
+
+ event->flags |= EVENT_FL_ISFTRACE;
+
+ event->name = event_read_name();
+ if (!event->name)
+ die("failed to read ftrace event name");
+
+ if (strcmp(event->name, "function") == 0)
+ event->flags |= EVENT_FL_ISFUNC;
+
+ else if (strcmp(event->name, "funcgraph_entry") == 0)
+ event->flags |= EVENT_FL_ISFUNCENT;
+
+ else if (strcmp(event->name, "funcgraph_exit") == 0)
+ event->flags |= EVENT_FL_ISFUNCRET;
+
+ else if (strcmp(event->name, "bprint") == 0)
+ event->flags |= EVENT_FL_ISBPRINT;
+
+ event->id = event_read_id();
+ if (event->id < 0)
+ die("failed to read ftrace event id");
+
+ add_event(event);
+
+ ret = event_read_format(event);
+ if (ret < 0)
+ die("failed to read ftrace event format");
+
+ ret = event_read_print(event);
+ if (ret < 0)
+ die("failed to read ftrace event print fmt");
+
+ /*
+ * The arguments for ftrace files are parsed by the fields.
+ * Set up the fields as their arguments.
+ */
+ list = &event->print_fmt.args;
+ for (field = event->format.fields; field; field = field->next) {
+ arg = malloc_or_die(sizeof(*arg));
+ memset(arg, 0, sizeof(*arg));
+ *list = arg;
+ list = &arg->next;
+ arg->type = PRINT_FIELD;
+ arg->field.name = field->name;
+ arg->field.field = field;
+ }
+ return 0;
+}
+
+int parse_event_file(char *buf, unsigned long size, char *system__unused __unused)
+{
+ struct event *event;
+ int ret;
+
+ init_input_buf(buf, size);
+
+ event = alloc_event();
+ if (!event)
+ return -ENOMEM;
+
+ event->name = event_read_name();
+ if (!event->name)
+ die("failed to read event name");
+
+ event->id = event_read_id();
+ if (event->id < 0)
+ die("failed to read event id");
+
+ ret = event_read_format(event);
+ if (ret < 0)
+ die("failed to read event format");
+
+ ret = event_read_print(event);
+ if (ret < 0)
+ die("failed to read event print fmt");
+
+#define PRINT_ARGS 0
+ if (PRINT_ARGS && event->print_fmt.args)
+ print_args(event->print_fmt.args);
+
+ add_event(event);
+ return 0;
+}
+
+void parse_set_info(int nr_cpus, int long_sz)
+{
+ cpus = nr_cpus;
+ long_size = long_sz;
+}
diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c
new file mode 100644
index 0000000..a1217a1
--- /dev/null
+++ b/tools/perf/util/trace-event-read.c
@@ -0,0 +1,512 @@
+/*
+ * Copyright (C) 2009, Steven Rostedt <srostedt@redhat.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License (not later!)
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#define _LARGEFILE64_SOURCE
+
+#include <dirent.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <getopt.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <sys/mman.h>
+#include <pthread.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <errno.h>
+
+#include "../perf.h"
+#include "util.h"
+#include "trace-event.h"
+
+static int input_fd;
+
+static int read_page;
+
+int file_bigendian;
+int host_bigendian;
+static int long_size;
+
+static unsigned long page_size;
+
+static int read_or_die(void *data, int size)
+{
+ int r;
+
+ r = read(input_fd, data, size);
+ if (r != size)
+ die("reading input file (size expected=%d received=%d)",
+ size, r);
+ return r;
+}
+
+static unsigned int read4(void)
+{
+ unsigned int data;
+
+ read_or_die(&data, 4);
+ return __data2host4(data);
+}
+
+static unsigned long long read8(void)
+{
+ unsigned long long data;
+
+ read_or_die(&data, 8);
+ return __data2host8(data);
+}
+
+static char *read_string(void)
+{
+ char buf[BUFSIZ];
+ char *str = NULL;
+ int size = 0;
+ int i;
+ int r;
+
+ for (;;) {
+ r = read(input_fd, buf, BUFSIZ);
+ if (r < 0)
+ die("reading input file");
+
+ if (!r)
+ die("no data");
+
+ for (i = 0; i < r; i++) {
+ if (!buf[i])
+ break;
+ }
+ if (i < r)
+ break;
+
+ if (str) {
+ size += BUFSIZ;
+ str = realloc(str, size);
+ if (!str)
+ die("malloc of size %d", size);
+ memcpy(str + (size - BUFSIZ), buf, BUFSIZ);
+ } else {
+ size = BUFSIZ;
+ str = malloc_or_die(size);
+ memcpy(str, buf, size);
+ }
+ }
+
+ /* trailing \0: */
+ i++;
+
+ /* move the file descriptor to the end of the string */
+ r = lseek(input_fd, -(r - i), SEEK_CUR);
+ if (r < 0)
+ die("lseek");
+
+ if (str) {
+ size += i;
+ str = realloc(str, size);
+ if (!str)
+ die("malloc of size %d", size);
+ memcpy(str + (size - i), buf, i);
+ } else {
+ size = i;
+ str = malloc_or_die(i);
+ memcpy(str, buf, i);
+ }
+
+ return str;
+}
+
+static void read_proc_kallsyms(void)
+{
+ unsigned int size;
+ char *buf;
+
+ size = read4();
+ if (!size)
+ return;
+
+ buf = malloc_or_die(size);
+ read_or_die(buf, size);
+
+ parse_proc_kallsyms(buf, size);
+
+ free(buf);
+}
+
+static void read_ftrace_printk(void)
+{
+ unsigned int size;
+ char *buf;
+
+ size = read4();
+ if (!size)
+ return;
+
+ buf = malloc_or_die(size);
+ read_or_die(buf, size);
+
+ parse_ftrace_printk(buf, size);
+
+ free(buf);
+}
+
+static void read_header_files(void)
+{
+ unsigned long long size;
+ char *header_page;
+ char *header_event;
+ char buf[BUFSIZ];
+
+ read_or_die(buf, 12);
+
+ if (memcmp(buf, "header_page", 12) != 0)
+ die("did not read header page");
+
+ size = read8();
+ header_page = malloc_or_die(size);
+ read_or_die(header_page, size);
+ parse_header_page(header_page, size);
+ free(header_page);
+
+ /*
+ * The size field in the page is of type long,
+ * use that instead, since it represents the kernel.
+ */
+ long_size = header_page_size_size;
+
+ read_or_die(buf, 13);
+ if (memcmp(buf, "header_event", 13) != 0)
+ die("did not read header event");
+
+ size = read8();
+ header_event = malloc_or_die(size);
+ read_or_die(header_event, size);
+ free(header_event);
+}
+
+static void read_ftrace_file(unsigned long long size)
+{
+ char *buf;
+
+ buf = malloc_or_die(size);
+ read_or_die(buf, size);
+ parse_ftrace_file(buf, size);
+ free(buf);
+}
+
+static void read_event_file(char *sys, unsigned long long size)
+{
+ char *buf;
+
+ buf = malloc_or_die(size);
+ read_or_die(buf, size);
+ parse_event_file(buf, size, sys);
+ free(buf);
+}
+
+static void read_ftrace_files(void)
+{
+ unsigned long long size;
+ int count;
+ int i;
+
+ count = read4();
+
+ for (i = 0; i < count; i++) {
+ size = read8();
+ read_ftrace_file(size);
+ }
+}
+
+static void read_event_files(void)
+{
+ unsigned long long size;
+ char *sys;
+ int systems;
+ int count;
+ int i,x;
+
+ systems = read4();
+
+ for (i = 0; i < systems; i++) {
+ sys = read_string();
+
+ count = read4();
+ for (x=0; x < count; x++) {
+ size = read8();
+ read_event_file(sys, size);
+ }
+ }
+}
+
+struct cpu_data {
+ unsigned long long offset;
+ unsigned long long size;
+ unsigned long long timestamp;
+ struct record *next;
+ char *page;
+ int cpu;
+ int index;
+ int page_size;
+};
+
+static struct cpu_data *cpu_data;
+
+static void update_cpu_data_index(int cpu)
+{
+ cpu_data[cpu].offset += page_size;
+ cpu_data[cpu].size -= page_size;
+ cpu_data[cpu].index = 0;
+}
+
+static void get_next_page(int cpu)
+{
+ off64_t save_seek;
+ off64_t ret;
+
+ if (!cpu_data[cpu].page)
+ return;
+
+ if (read_page) {
+ if (cpu_data[cpu].size <= page_size) {
+ free(cpu_data[cpu].page);
+ cpu_data[cpu].page = NULL;
+ return;
+ }
+
+ update_cpu_data_index(cpu);
+
+ /* other parts of the code may expect the pointer to not move */
+ save_seek = lseek64(input_fd, 0, SEEK_CUR);
+
+ ret = lseek64(input_fd, cpu_data[cpu].offset, SEEK_SET);
+ if (ret < 0)
+ die("failed to lseek");
+ ret = read(input_fd, cpu_data[cpu].page, page_size);
+ if (ret < 0)
+ die("failed to read page");
+
+ /* reset the file pointer back */
+ lseek64(input_fd, save_seek, SEEK_SET);
+
+ return;
+ }
+
+ munmap(cpu_data[cpu].page, page_size);
+ cpu_data[cpu].page = NULL;
+
+ if (cpu_data[cpu].size <= page_size)
+ return;
+
+ update_cpu_data_index(cpu);
+
+ cpu_data[cpu].page = mmap(NULL, page_size, PROT_READ, MAP_PRIVATE,
+ input_fd, cpu_data[cpu].offset);
+ if (cpu_data[cpu].page == MAP_FAILED)
+ die("failed to mmap cpu %d at offset 0x%llx",
+ cpu, cpu_data[cpu].offset);
+}
+
+static unsigned int type_len4host(unsigned int type_len_ts)
+{
+ if (file_bigendian)
+ return (type_len_ts >> 27) & ((1 << 5) - 1);
+ else
+ return type_len_ts & ((1 << 5) - 1);
+}
+
+static unsigned int ts4host(unsigned int type_len_ts)
+{
+ if (file_bigendian)
+ return type_len_ts & ((1 << 27) - 1);
+ else
+ return type_len_ts >> 5;
+}
+
+static int calc_index(void *ptr, int cpu)
+{
+ return (unsigned long)ptr - (unsigned long)cpu_data[cpu].page;
+}
+
+struct record *trace_peek_data(int cpu)
+{
+ struct record *data;
+ void *page = cpu_data[cpu].page;
+ int idx = cpu_data[cpu].index;
+ void *ptr = page + idx;
+ unsigned long long extend;
+ unsigned int type_len_ts;
+ unsigned int type_len;
+ unsigned int delta;
+ unsigned int length = 0;
+
+ if (cpu_data[cpu].next)
+ return cpu_data[cpu].next;
+
+ if (!page)
+ return NULL;
+
+ if (!idx) {
+ /* FIXME: handle header page */
+ if (header_page_ts_size != 8)
+ die("expected a long long type for timestamp");
+ cpu_data[cpu].timestamp = data2host8(ptr);
+ ptr += 8;
+ switch (header_page_size_size) {
+ case 4:
+ cpu_data[cpu].page_size = data2host4(ptr);
+ ptr += 4;
+ break;
+ case 8:
+ cpu_data[cpu].page_size = data2host8(ptr);
+ ptr += 8;
+ break;
+ default:
+ die("bad long size");
+ }
+ ptr = cpu_data[cpu].page + header_page_data_offset;
+ }
+
+read_again:
+ idx = calc_index(ptr, cpu);
+
+ if (idx >= cpu_data[cpu].page_size) {
+ get_next_page(cpu);
+ return trace_peek_data(cpu);
+ }
+
+ type_len_ts = data2host4(ptr);
+ ptr += 4;
+
+ type_len = type_len4host(type_len_ts);
+ delta = ts4host(type_len_ts);
+
+ switch (type_len) {
+ case RINGBUF_TYPE_PADDING:
+ if (!delta)
+ die("error, hit unexpected end of page");
+ length = data2host4(ptr);
+ ptr += 4;
+ length *= 4;
+ ptr += length;
+ goto read_again;
+
+ case RINGBUF_TYPE_TIME_EXTEND:
+ extend = data2host4(ptr);
+ ptr += 4;
+ extend <<= TS_SHIFT;
+ extend += delta;
+ cpu_data[cpu].timestamp += extend;
+ goto read_again;
+
+ case RINGBUF_TYPE_TIME_STAMP:
+ ptr += 12;
+ break;
+ case 0:
+ length = data2host4(ptr);
+ ptr += 4;
+ die("here! length=%d", length);
+ break;
+ default:
+ length = type_len * 4;
+ break;
+ }
+
+ cpu_data[cpu].timestamp += delta;
+
+ data = malloc_or_die(sizeof(*data));
+ memset(data, 0, sizeof(*data));
+
+ data->ts = cpu_data[cpu].timestamp;
+ data->size = length;
+ data->data = ptr;
+ ptr += length;
+
+ cpu_data[cpu].index = calc_index(ptr, cpu);
+ cpu_data[cpu].next = data;
+
+ return data;
+}
+
+struct record *trace_read_data(int cpu)
+{
+ struct record *data;
+
+ data = trace_peek_data(cpu);
+ cpu_data[cpu].next = NULL;
+
+ return data;
+}
+
+void trace_report (void)
+{
+ const char *input_file = "trace.info";
+ char buf[BUFSIZ];
+ char test[] = { 23, 8, 68 };
+ char *version;
+ int show_funcs = 0;
+ int show_printk = 0;
+
+ input_fd = open(input_file, O_RDONLY);
+ if (input_fd < 0)
+ die("opening '%s'\n", input_file);
+
+ read_or_die(buf, 3);
+ if (memcmp(buf, test, 3) != 0)
+ die("not an trace data file");
+
+ read_or_die(buf, 7);
+ if (memcmp(buf, "tracing", 7) != 0)
+ die("not a trace file (missing tracing)");
+
+ version = read_string();
+ printf("version = %s\n", version);
+ free(version);
+
+ read_or_die(buf, 1);
+ file_bigendian = buf[0];
+ host_bigendian = bigendian();
+
+ read_or_die(buf, 1);
+ long_size = buf[0];
+
+ page_size = read4();
+
+ read_header_files();
+
+ read_ftrace_files();
+ read_event_files();
+ read_proc_kallsyms();
+ read_ftrace_printk();
+
+ if (show_funcs) {
+ print_funcs();
+ return;
+ }
+ if (show_printk) {
+ print_printk();
+ return;
+ }
+
+ return;
+}
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
new file mode 100644
index 0000000..420294a
--- /dev/null
+++ b/tools/perf/util/trace-event.h
@@ -0,0 +1,240 @@
+#ifndef _TRACE_EVENTS_H
+#define _TRACE_EVENTS_H
+
+#include "parse-events.h"
+
+#define __unused __attribute__((unused))
+
+
+#ifndef PAGE_MASK
+#define PAGE_MASK (page_size - 1)
+#endif
+
+enum {
+ RINGBUF_TYPE_PADDING = 29,
+ RINGBUF_TYPE_TIME_EXTEND = 30,
+ RINGBUF_TYPE_TIME_STAMP = 31,
+};
+
+#ifndef TS_SHIFT
+#define TS_SHIFT 27
+#endif
+
+#define NSECS_PER_SEC 1000000000ULL
+#define NSECS_PER_USEC 1000ULL
+
+enum format_flags {
+ FIELD_IS_ARRAY = 1,
+ FIELD_IS_POINTER = 2,
+};
+
+struct format_field {
+ struct format_field *next;
+ char *type;
+ char *name;
+ int offset;
+ int size;
+ unsigned long flags;
+};
+
+struct format {
+ int nr_common;
+ int nr_fields;
+ struct format_field *common_fields;
+ struct format_field *fields;
+};
+
+struct print_arg_atom {
+ char *atom;
+};
+
+struct print_arg_string {
+ char *string;
+ int offset;
+};
+
+struct print_arg_field {
+ char *name;
+ struct format_field *field;
+};
+
+struct print_flag_sym {
+ struct print_flag_sym *next;
+ char *value;
+ char *str;
+};
+
+struct print_arg_typecast {
+ char *type;
+ struct print_arg *item;
+};
+
+struct print_arg_flags {
+ struct print_arg *field;
+ char *delim;
+ struct print_flag_sym *flags;
+};
+
+struct print_arg_symbol {
+ struct print_arg *field;
+ struct print_flag_sym *symbols;
+};
+
+struct print_arg;
+
+struct print_arg_op {
+ char *op;
+ int prio;
+ struct print_arg *left;
+ struct print_arg *right;
+};
+
+struct print_arg_func {
+ char *name;
+ struct print_arg *args;
+};
+
+enum print_arg_type {
+ PRINT_NULL,
+ PRINT_ATOM,
+ PRINT_FIELD,
+ PRINT_FLAGS,
+ PRINT_SYMBOL,
+ PRINT_TYPE,
+ PRINT_STRING,
+ PRINT_OP,
+};
+
+struct print_arg {
+ struct print_arg *next;
+ enum print_arg_type type;
+ union {
+ struct print_arg_atom atom;
+ struct print_arg_field field;
+ struct print_arg_typecast typecast;
+ struct print_arg_flags flags;
+ struct print_arg_symbol symbol;
+ struct print_arg_func func;
+ struct print_arg_string string;
+ struct print_arg_op op;
+ };
+};
+
+struct print_fmt {
+ char *format;
+ struct print_arg *args;
+};
+
+struct event {
+ struct event *next;
+ char *name;
+ int id;
+ int flags;
+ struct format format;
+ struct print_fmt print_fmt;
+};
+
+enum {
+ EVENT_FL_ISFTRACE = 1,
+ EVENT_FL_ISPRINT = 2,
+ EVENT_FL_ISBPRINT = 4,
+ EVENT_FL_ISFUNC = 8,
+ EVENT_FL_ISFUNCENT = 16,
+ EVENT_FL_ISFUNCRET = 32,
+};
+
+struct record {
+ unsigned long long ts;
+ int size;
+ void *data;
+};
+
+struct record *trace_peek_data(int cpu);
+struct record *trace_read_data(int cpu);
+
+void parse_set_info(int nr_cpus, int long_sz);
+
+void trace_report(void);
+
+void *malloc_or_die(unsigned int size);
+
+void parse_cmdlines(char *file, int size);
+void parse_proc_kallsyms(char *file, unsigned int size);
+void parse_ftrace_printk(char *file, unsigned int size);
+
+void print_funcs(void);
+void print_printk(void);
+
+int parse_ftrace_file(char *buf, unsigned long size);
+int parse_event_file(char *buf, unsigned long size, char *system);
+void print_event(int cpu, void *data, int size, unsigned long long nsecs,
+ char *comm);
+
+extern int file_bigendian;
+extern int host_bigendian;
+
+int bigendian(void);
+
+static inline unsigned short __data2host2(unsigned short data)
+{
+ unsigned short swap;
+
+ if (host_bigendian == file_bigendian)
+ return data;
+
+ swap = ((data & 0xffULL) << 8) |
+ ((data & (0xffULL << 8)) >> 8);
+
+ return swap;
+}
+
+static inline unsigned int __data2host4(unsigned int data)
+{
+ unsigned int swap;
+
+ if (host_bigendian == file_bigendian)
+ return data;
+
+ swap = ((data & 0xffULL) << 24) |
+ ((data & (0xffULL << 8)) << 8) |
+ ((data & (0xffULL << 16)) >> 8) |
+ ((data & (0xffULL << 24)) >> 24);
+
+ return swap;
+}
+
+static inline unsigned long long __data2host8(unsigned long long data)
+{
+ unsigned long long swap;
+
+ if (host_bigendian == file_bigendian)
+ return data;
+
+ swap = ((data & 0xffULL) << 56) |
+ ((data & (0xffULL << 8)) << 40) |
+ ((data & (0xffULL << 16)) << 24) |
+ ((data & (0xffULL << 24)) << 8) |
+ ((data & (0xffULL << 32)) >> 8) |
+ ((data & (0xffULL << 40)) >> 24) |
+ ((data & (0xffULL << 48)) >> 40) |
+ ((data & (0xffULL << 56)) >> 56);
+
+ return swap;
+}
+
+#define data2host2(ptr) __data2host2(*(unsigned short *)ptr)
+#define data2host4(ptr) __data2host4(*(unsigned int *)ptr)
+#define data2host8(ptr) __data2host8(*(unsigned long long *)ptr)
+
+extern int header_page_ts_offset;
+extern int header_page_ts_size;
+extern int header_page_size_offset;
+extern int header_page_size_size;
+extern int header_page_data_offset;
+extern int header_page_data_size;
+
+int parse_header_page(char *buf, unsigned long size);
+
+void read_tracing_data(struct perf_counter_attr *pattrs, int nb_counters);
+
+#endif /* _TRACE_EVENTS_H */
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 68fe157..9de2329 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -39,10 +39,6 @@
/* Approximation of the length of the decimal representation of this type. */
#define decimal_length(x) ((int)(sizeof(x) * 2.56 + 0.5) + 1)
-#if !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(__USLC__) && !defined(_M_UNIX)
-#define _XOPEN_SOURCE 600 /* glibc2 and AIX 5.3L need 500, OpenBSD needs 600 for S_ISLNK() */
-#define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */
-#endif
#define _ALL_SOURCE 1
#define _GNU_SOURCE 1
#define _BSD_SOURCE 1
@@ -83,6 +79,7 @@
#include <inttypes.h>
#include "../../../include/linux/magic.h"
+
#ifndef NO_ICONV
#include <iconv.h>
#endif
@@ -310,6 +307,7 @@
#undef isspace
#undef isdigit
#undef isalpha
+#undef isprint
#undef isalnum
#undef tolower
#undef toupper
diff --git a/tools/perf/util/values.c b/tools/perf/util/values.c
new file mode 100644
index 0000000..1c15e39
--- /dev/null
+++ b/tools/perf/util/values.c
@@ -0,0 +1,230 @@
+#include <stdlib.h>
+
+#include "util.h"
+#include "values.h"
+
+void perf_read_values_init(struct perf_read_values *values)
+{
+ values->threads_max = 16;
+ values->pid = malloc(values->threads_max * sizeof(*values->pid));
+ values->tid = malloc(values->threads_max * sizeof(*values->tid));
+ values->value = malloc(values->threads_max * sizeof(*values->value));
+ if (!values->pid || !values->tid || !values->value)
+ die("failed to allocate read_values threads arrays");
+ values->threads = 0;
+
+ values->counters_max = 16;
+ values->counterrawid = malloc(values->counters_max
+ * sizeof(*values->counterrawid));
+ values->countername = malloc(values->counters_max
+ * sizeof(*values->countername));
+ if (!values->counterrawid || !values->countername)
+ die("failed to allocate read_values counters arrays");
+ values->counters = 0;
+}
+
+void perf_read_values_destroy(struct perf_read_values *values)
+{
+ int i;
+
+ if (!values->threads_max || !values->counters_max)
+ return;
+
+ for (i = 0; i < values->threads; i++)
+ free(values->value[i]);
+ free(values->pid);
+ free(values->tid);
+ free(values->counterrawid);
+ for (i = 0; i < values->counters; i++)
+ free(values->countername[i]);
+ free(values->countername);
+}
+
+static void perf_read_values__enlarge_threads(struct perf_read_values *values)
+{
+ values->threads_max *= 2;
+ values->pid = realloc(values->pid,
+ values->threads_max * sizeof(*values->pid));
+ values->tid = realloc(values->tid,
+ values->threads_max * sizeof(*values->tid));
+ values->value = realloc(values->value,
+ values->threads_max * sizeof(*values->value));
+ if (!values->pid || !values->tid || !values->value)
+ die("failed to enlarge read_values threads arrays");
+}
+
+static int perf_read_values__findnew_thread(struct perf_read_values *values,
+ u32 pid, u32 tid)
+{
+ int i;
+
+ for (i = 0; i < values->threads; i++)
+ if (values->pid[i] == pid && values->tid[i] == tid)
+ return i;
+
+ if (values->threads == values->threads_max)
+ perf_read_values__enlarge_threads(values);
+
+ i = values->threads++;
+ values->pid[i] = pid;
+ values->tid[i] = tid;
+ values->value[i] = malloc(values->counters_max * sizeof(**values->value));
+ if (!values->value[i])
+ die("failed to allocate read_values counters array");
+
+ return i;
+}
+
+static void perf_read_values__enlarge_counters(struct perf_read_values *values)
+{
+ int i;
+
+ values->counters_max *= 2;
+ values->counterrawid = realloc(values->counterrawid,
+ values->counters_max * sizeof(*values->counterrawid));
+ values->countername = realloc(values->countername,
+ values->counters_max * sizeof(*values->countername));
+ if (!values->counterrawid || !values->countername)
+ die("failed to enlarge read_values counters arrays");
+
+ for (i = 0; i < values->threads; i++) {
+ values->value[i] = realloc(values->value[i],
+ values->counters_max * sizeof(**values->value));
+ if (!values->value[i])
+ die("failed to enlarge read_values counters arrays");
+ }
+}
+
+static int perf_read_values__findnew_counter(struct perf_read_values *values,
+ u64 rawid, const char *name)
+{
+ int i;
+
+ for (i = 0; i < values->counters; i++)
+ if (values->counterrawid[i] == rawid)
+ return i;
+
+ if (values->counters == values->counters_max)
+ perf_read_values__enlarge_counters(values);
+
+ i = values->counters++;
+ values->counterrawid[i] = rawid;
+ values->countername[i] = strdup(name);
+
+ return i;
+}
+
+void perf_read_values_add_value(struct perf_read_values *values,
+ u32 pid, u32 tid,
+ u64 rawid, const char *name, u64 value)
+{
+ int tindex, cindex;
+
+ tindex = perf_read_values__findnew_thread(values, pid, tid);
+ cindex = perf_read_values__findnew_counter(values, rawid, name);
+
+ values->value[tindex][cindex] = value;
+}
+
+static void perf_read_values__display_pretty(FILE *fp,
+ struct perf_read_values *values)
+{
+ int i, j;
+ int pidwidth, tidwidth;
+ int *counterwidth;
+
+ counterwidth = malloc(values->counters * sizeof(*counterwidth));
+ if (!counterwidth)
+ die("failed to allocate counterwidth array");
+ tidwidth = 3;
+ pidwidth = 3;
+ for (j = 0; j < values->counters; j++)
+ counterwidth[j] = strlen(values->countername[j]);
+ for (i = 0; i < values->threads; i++) {
+ int width;
+
+ width = snprintf(NULL, 0, "%d", values->pid[i]);
+ if (width > pidwidth)
+ pidwidth = width;
+ width = snprintf(NULL, 0, "%d", values->tid[i]);
+ if (width > tidwidth)
+ tidwidth = width;
+ for (j = 0; j < values->counters; j++) {
+ width = snprintf(NULL, 0, "%Lu", values->value[i][j]);
+ if (width > counterwidth[j])
+ counterwidth[j] = width;
+ }
+ }
+
+ fprintf(fp, "# %*s %*s", pidwidth, "PID", tidwidth, "TID");
+ for (j = 0; j < values->counters; j++)
+ fprintf(fp, " %*s", counterwidth[j], values->countername[j]);
+ fprintf(fp, "\n");
+
+ for (i = 0; i < values->threads; i++) {
+ fprintf(fp, " %*d %*d", pidwidth, values->pid[i],
+ tidwidth, values->tid[i]);
+ for (j = 0; j < values->counters; j++)
+ fprintf(fp, " %*Lu",
+ counterwidth[j], values->value[i][j]);
+ fprintf(fp, "\n");
+ }
+}
+
+static void perf_read_values__display_raw(FILE *fp,
+ struct perf_read_values *values)
+{
+ int width, pidwidth, tidwidth, namewidth, rawwidth, countwidth;
+ int i, j;
+
+ tidwidth = 3; /* TID */
+ pidwidth = 3; /* PID */
+ namewidth = 4; /* "Name" */
+ rawwidth = 3; /* "Raw" */
+ countwidth = 5; /* "Count" */
+
+ for (i = 0; i < values->threads; i++) {
+ width = snprintf(NULL, 0, "%d", values->pid[i]);
+ if (width > pidwidth)
+ pidwidth = width;
+ width = snprintf(NULL, 0, "%d", values->tid[i]);
+ if (width > tidwidth)
+ tidwidth = width;
+ }
+ for (j = 0; j < values->counters; j++) {
+ width = strlen(values->countername[j]);
+ if (width > namewidth)
+ namewidth = width;
+ width = snprintf(NULL, 0, "%llx", values->counterrawid[j]);
+ if (width > rawwidth)
+ rawwidth = width;
+ }
+ for (i = 0; i < values->threads; i++) {
+ for (j = 0; j < values->counters; j++) {
+ width = snprintf(NULL, 0, "%Lu", values->value[i][j]);
+ if (width > countwidth)
+ countwidth = width;
+ }
+ }
+
+ fprintf(fp, "# %*s %*s %*s %*s %*s\n",
+ pidwidth, "PID", tidwidth, "TID",
+ namewidth, "Name", rawwidth, "Raw",
+ countwidth, "Count");
+ for (i = 0; i < values->threads; i++)
+ for (j = 0; j < values->counters; j++)
+ fprintf(fp, " %*d %*d %*s %*llx %*Lu\n",
+ pidwidth, values->pid[i],
+ tidwidth, values->tid[i],
+ namewidth, values->countername[j],
+ rawwidth, values->counterrawid[j],
+ countwidth, values->value[i][j]);
+}
+
+void perf_read_values_display(FILE *fp, struct perf_read_values *values, int raw)
+{
+ if (raw)
+ perf_read_values__display_raw(fp, values);
+ else
+ perf_read_values__display_pretty(fp, values);
+}
diff --git a/tools/perf/util/values.h b/tools/perf/util/values.h
new file mode 100644
index 0000000..cadf8cf
--- /dev/null
+++ b/tools/perf/util/values.h
@@ -0,0 +1,27 @@
+#ifndef _PERF_VALUES_H
+#define _PERF_VALUES_H
+
+#include "types.h"
+
+struct perf_read_values {
+ int threads;
+ int threads_max;
+ u32 *pid, *tid;
+ int counters;
+ int counters_max;
+ u64 *counterrawid;
+ char **countername;
+ u64 **value;
+};
+
+void perf_read_values_init(struct perf_read_values *values);
+void perf_read_values_destroy(struct perf_read_values *values);
+
+void perf_read_values_add_value(struct perf_read_values *values,
+ u32 pid, u32 tid,
+ u64 rawid, const char *name, u64 value);
+
+void perf_read_values_display(FILE *fp, struct perf_read_values *values,
+ int raw);
+
+#endif /* _PERF_VALUES_H */
diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig
new file mode 100644
index 0000000..daece36
--- /dev/null
+++ b/virt/kvm/Kconfig
@@ -0,0 +1,14 @@
+# KVM common configuration items and defaults
+
+config HAVE_KVM
+ bool
+
+config HAVE_KVM_IRQCHIP
+ bool
+
+config HAVE_KVM_EVENTFD
+ bool
+ select EVENTFD
+
+config KVM_APIC_ARCHITECTURE
+ bool
diff --git a/virt/kvm/coalesced_mmio.c b/virt/kvm/coalesced_mmio.c
index 5ae620d..04d69cd 100644
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -14,32 +14,28 @@
#include "coalesced_mmio.h"
-static int coalesced_mmio_in_range(struct kvm_io_device *this,
- gpa_t addr, int len, int is_write)
+static inline struct kvm_coalesced_mmio_dev *to_mmio(struct kvm_io_device *dev)
{
- struct kvm_coalesced_mmio_dev *dev =
- (struct kvm_coalesced_mmio_dev*)this->private;
+ return container_of(dev, struct kvm_coalesced_mmio_dev, dev);
+}
+
+static int coalesced_mmio_in_range(struct kvm_coalesced_mmio_dev *dev,
+ gpa_t addr, int len)
+{
struct kvm_coalesced_mmio_zone *zone;
- int next;
+ struct kvm_coalesced_mmio_ring *ring;
+ unsigned avail;
int i;
- if (!is_write)
- return 0;
-
- /* kvm->lock is taken by the caller and must be not released before
- * dev.read/write
- */
-
/* Are we able to batch it ? */
/* last is the first free entry
* check if we don't meet the first used entry
* there is always one unused entry in the buffer
*/
-
- next = (dev->kvm->coalesced_mmio_ring->last + 1) %
- KVM_COALESCED_MMIO_MAX;
- if (next == dev->kvm->coalesced_mmio_ring->first) {
+ ring = dev->kvm->coalesced_mmio_ring;
+ avail = (ring->first - ring->last - 1) % KVM_COALESCED_MMIO_MAX;
+ if (avail < KVM_MAX_VCPUS) {
/* full */
return 0;
}
@@ -60,14 +56,15 @@
return 0;
}
-static void coalesced_mmio_write(struct kvm_io_device *this,
- gpa_t addr, int len, const void *val)
+static int coalesced_mmio_write(struct kvm_io_device *this,
+ gpa_t addr, int len, const void *val)
{
- struct kvm_coalesced_mmio_dev *dev =
- (struct kvm_coalesced_mmio_dev*)this->private;
+ struct kvm_coalesced_mmio_dev *dev = to_mmio(this);
struct kvm_coalesced_mmio_ring *ring = dev->kvm->coalesced_mmio_ring;
+ if (!coalesced_mmio_in_range(dev, addr, len))
+ return -EOPNOTSUPP;
- /* kvm->lock must be taken by caller before call to in_range()*/
+ spin_lock(&dev->lock);
/* copy data in first free entry of the ring */
@@ -76,29 +73,40 @@
memcpy(ring->coalesced_mmio[ring->last].data, val, len);
smp_wmb();
ring->last = (ring->last + 1) % KVM_COALESCED_MMIO_MAX;
+ spin_unlock(&dev->lock);
+ return 0;
}
static void coalesced_mmio_destructor(struct kvm_io_device *this)
{
- kfree(this);
+ struct kvm_coalesced_mmio_dev *dev = to_mmio(this);
+
+ kfree(dev);
}
+static const struct kvm_io_device_ops coalesced_mmio_ops = {
+ .write = coalesced_mmio_write,
+ .destructor = coalesced_mmio_destructor,
+};
+
int kvm_coalesced_mmio_init(struct kvm *kvm)
{
struct kvm_coalesced_mmio_dev *dev;
+ int ret;
dev = kzalloc(sizeof(struct kvm_coalesced_mmio_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- dev->dev.write = coalesced_mmio_write;
- dev->dev.in_range = coalesced_mmio_in_range;
- dev->dev.destructor = coalesced_mmio_destructor;
- dev->dev.private = dev;
+ spin_lock_init(&dev->lock);
+ kvm_iodevice_init(&dev->dev, &coalesced_mmio_ops);
dev->kvm = kvm;
kvm->coalesced_mmio_dev = dev;
- kvm_io_bus_register_dev(&kvm->mmio_bus, &dev->dev);
- return 0;
+ ret = kvm_io_bus_register_dev(kvm, &kvm->mmio_bus, &dev->dev);
+ if (ret < 0)
+ kfree(dev);
+
+ return ret;
}
int kvm_vm_ioctl_register_coalesced_mmio(struct kvm *kvm,
@@ -109,16 +117,16 @@
if (dev == NULL)
return -EINVAL;
- mutex_lock(&kvm->lock);
+ down_write(&kvm->slots_lock);
if (dev->nb_zones >= KVM_COALESCED_MMIO_ZONE_MAX) {
- mutex_unlock(&kvm->lock);
+ up_write(&kvm->slots_lock);
return -ENOBUFS;
}
dev->zone[dev->nb_zones] = *zone;
dev->nb_zones++;
- mutex_unlock(&kvm->lock);
+ up_write(&kvm->slots_lock);
return 0;
}
@@ -132,7 +140,7 @@
if (dev == NULL)
return -EINVAL;
- mutex_lock(&kvm->lock);
+ down_write(&kvm->slots_lock);
i = dev->nb_zones;
while(i) {
@@ -150,7 +158,7 @@
i--;
}
- mutex_unlock(&kvm->lock);
+ up_write(&kvm->slots_lock);
return 0;
}
diff --git a/virt/kvm/coalesced_mmio.h b/virt/kvm/coalesced_mmio.h
index 5ac0ec6..4b49f27 100644
--- a/virt/kvm/coalesced_mmio.h
+++ b/virt/kvm/coalesced_mmio.h
@@ -12,6 +12,7 @@
struct kvm_coalesced_mmio_dev {
struct kvm_io_device dev;
struct kvm *kvm;
+ spinlock_t lock;
int nb_zones;
struct kvm_coalesced_mmio_zone zone[KVM_COALESCED_MMIO_ZONE_MAX];
};
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
new file mode 100644
index 0000000..bb4ebd8
--- /dev/null
+++ b/virt/kvm/eventfd.c
@@ -0,0 +1,578 @@
+/*
+ * kvm eventfd support - use eventfd objects to signal various KVM events
+ *
+ * Copyright 2009 Novell. All Rights Reserved.
+ *
+ * Author:
+ * Gregory Haskins <ghaskins@novell.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/kvm.h>
+#include <linux/workqueue.h>
+#include <linux/syscalls.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/file.h>
+#include <linux/list.h>
+#include <linux/eventfd.h>
+#include <linux/kernel.h>
+
+#include "iodev.h"
+
+/*
+ * --------------------------------------------------------------------
+ * irqfd: Allows an fd to be used to inject an interrupt to the guest
+ *
+ * Credit goes to Avi Kivity for the original idea.
+ * --------------------------------------------------------------------
+ */
+
+struct _irqfd {
+ struct kvm *kvm;
+ struct eventfd_ctx *eventfd;
+ int gsi;
+ struct list_head list;
+ poll_table pt;
+ wait_queue_head_t *wqh;
+ wait_queue_t wait;
+ struct work_struct inject;
+ struct work_struct shutdown;
+};
+
+static struct workqueue_struct *irqfd_cleanup_wq;
+
+static void
+irqfd_inject(struct work_struct *work)
+{
+ struct _irqfd *irqfd = container_of(work, struct _irqfd, inject);
+ struct kvm *kvm = irqfd->kvm;
+
+ mutex_lock(&kvm->irq_lock);
+ kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 1);
+ kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 0);
+ mutex_unlock(&kvm->irq_lock);
+}
+
+/*
+ * Race-free decouple logic (ordering is critical)
+ */
+static void
+irqfd_shutdown(struct work_struct *work)
+{
+ struct _irqfd *irqfd = container_of(work, struct _irqfd, shutdown);
+
+ /*
+ * Synchronize with the wait-queue and unhook ourselves to prevent
+ * further events.
+ */
+ remove_wait_queue(irqfd->wqh, &irqfd->wait);
+
+ /*
+ * We know no new events will be scheduled at this point, so block
+ * until all previously outstanding events have completed
+ */
+ flush_work(&irqfd->inject);
+
+ /*
+ * It is now safe to release the object's resources
+ */
+ eventfd_ctx_put(irqfd->eventfd);
+ kfree(irqfd);
+}
+
+
+/* assumes kvm->irqfds.lock is held */
+static bool
+irqfd_is_active(struct _irqfd *irqfd)
+{
+ return list_empty(&irqfd->list) ? false : true;
+}
+
+/*
+ * Mark the irqfd as inactive and schedule it for removal
+ *
+ * assumes kvm->irqfds.lock is held
+ */
+static void
+irqfd_deactivate(struct _irqfd *irqfd)
+{
+ BUG_ON(!irqfd_is_active(irqfd));
+
+ list_del_init(&irqfd->list);
+
+ queue_work(irqfd_cleanup_wq, &irqfd->shutdown);
+}
+
+/*
+ * Called with wqh->lock held and interrupts disabled
+ */
+static int
+irqfd_wakeup(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+ struct _irqfd *irqfd = container_of(wait, struct _irqfd, wait);
+ unsigned long flags = (unsigned long)key;
+
+ if (flags & POLLIN)
+ /* An event has been signaled, inject an interrupt */
+ schedule_work(&irqfd->inject);
+
+ if (flags & POLLHUP) {
+ /* The eventfd is closing, detach from KVM */
+ struct kvm *kvm = irqfd->kvm;
+ unsigned long flags;
+
+ spin_lock_irqsave(&kvm->irqfds.lock, flags);
+
+ /*
+ * We must check if someone deactivated the irqfd before
+ * we could acquire the irqfds.lock since the item is
+ * deactivated from the KVM side before it is unhooked from
+ * the wait-queue. If it is already deactivated, we can
+ * simply return knowing the other side will cleanup for us.
+ * We cannot race against the irqfd going away since the
+ * other side is required to acquire wqh->lock, which we hold
+ */
+ if (irqfd_is_active(irqfd))
+ irqfd_deactivate(irqfd);
+
+ spin_unlock_irqrestore(&kvm->irqfds.lock, flags);
+ }
+
+ return 0;
+}
+
+static void
+irqfd_ptable_queue_proc(struct file *file, wait_queue_head_t *wqh,
+ poll_table *pt)
+{
+ struct _irqfd *irqfd = container_of(pt, struct _irqfd, pt);
+
+ irqfd->wqh = wqh;
+ add_wait_queue(wqh, &irqfd->wait);
+}
+
+static int
+kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
+{
+ struct _irqfd *irqfd;
+ struct file *file = NULL;
+ struct eventfd_ctx *eventfd = NULL;
+ int ret;
+ unsigned int events;
+
+ irqfd = kzalloc(sizeof(*irqfd), GFP_KERNEL);
+ if (!irqfd)
+ return -ENOMEM;
+
+ irqfd->kvm = kvm;
+ irqfd->gsi = gsi;
+ INIT_LIST_HEAD(&irqfd->list);
+ INIT_WORK(&irqfd->inject, irqfd_inject);
+ INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
+
+ file = eventfd_fget(fd);
+ if (IS_ERR(file)) {
+ ret = PTR_ERR(file);
+ goto fail;
+ }
+
+ eventfd = eventfd_ctx_fileget(file);
+ if (IS_ERR(eventfd)) {
+ ret = PTR_ERR(eventfd);
+ goto fail;
+ }
+
+ irqfd->eventfd = eventfd;
+
+ /*
+ * Install our own custom wake-up handling so we are notified via
+ * a callback whenever someone signals the underlying eventfd
+ */
+ init_waitqueue_func_entry(&irqfd->wait, irqfd_wakeup);
+ init_poll_funcptr(&irqfd->pt, irqfd_ptable_queue_proc);
+
+ events = file->f_op->poll(file, &irqfd->pt);
+
+ spin_lock_irq(&kvm->irqfds.lock);
+ list_add_tail(&irqfd->list, &kvm->irqfds.items);
+ spin_unlock_irq(&kvm->irqfds.lock);
+
+ /*
+ * Check if there was an event already pending on the eventfd
+ * before we registered, and trigger it as if we didn't miss it.
+ */
+ if (events & POLLIN)
+ schedule_work(&irqfd->inject);
+
+ /*
+ * do not drop the file until the irqfd is fully initialized, otherwise
+ * we might race against the POLLHUP
+ */
+ fput(file);
+
+ return 0;
+
+fail:
+ if (eventfd && !IS_ERR(eventfd))
+ eventfd_ctx_put(eventfd);
+
+ if (!IS_ERR(file))
+ fput(file);
+
+ kfree(irqfd);
+ return ret;
+}
+
+void
+kvm_eventfd_init(struct kvm *kvm)
+{
+ spin_lock_init(&kvm->irqfds.lock);
+ INIT_LIST_HEAD(&kvm->irqfds.items);
+ INIT_LIST_HEAD(&kvm->ioeventfds);
+}
+
+/*
+ * shutdown any irqfd's that match fd+gsi
+ */
+static int
+kvm_irqfd_deassign(struct kvm *kvm, int fd, int gsi)
+{
+ struct _irqfd *irqfd, *tmp;
+ struct eventfd_ctx *eventfd;
+
+ eventfd = eventfd_ctx_fdget(fd);
+ if (IS_ERR(eventfd))
+ return PTR_ERR(eventfd);
+
+ spin_lock_irq(&kvm->irqfds.lock);
+
+ list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
+ if (irqfd->eventfd == eventfd && irqfd->gsi == gsi)
+ irqfd_deactivate(irqfd);
+ }
+
+ spin_unlock_irq(&kvm->irqfds.lock);
+ eventfd_ctx_put(eventfd);
+
+ /*
+ * Block until we know all outstanding shutdown jobs have completed
+ * so that we guarantee there will not be any more interrupts on this
+ * gsi once this deassign function returns.
+ */
+ flush_workqueue(irqfd_cleanup_wq);
+
+ return 0;
+}
+
+int
+kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+{
+ if (flags & KVM_IRQFD_FLAG_DEASSIGN)
+ return kvm_irqfd_deassign(kvm, fd, gsi);
+
+ return kvm_irqfd_assign(kvm, fd, gsi);
+}
+
+/*
+ * This function is called as the kvm VM fd is being released. Shutdown all
+ * irqfds that still remain open
+ */
+void
+kvm_irqfd_release(struct kvm *kvm)
+{
+ struct _irqfd *irqfd, *tmp;
+
+ spin_lock_irq(&kvm->irqfds.lock);
+
+ list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list)
+ irqfd_deactivate(irqfd);
+
+ spin_unlock_irq(&kvm->irqfds.lock);
+
+ /*
+ * Block until we know all outstanding shutdown jobs have completed
+ * since we do not take a kvm* reference.
+ */
+ flush_workqueue(irqfd_cleanup_wq);
+
+}
+
+/*
+ * create a host-wide workqueue for issuing deferred shutdown requests
+ * aggregated from all vm* instances. We need our own isolated single-thread
+ * queue to prevent deadlock against flushing the normal work-queue.
+ */
+static int __init irqfd_module_init(void)
+{
+ irqfd_cleanup_wq = create_singlethread_workqueue("kvm-irqfd-cleanup");
+ if (!irqfd_cleanup_wq)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __exit irqfd_module_exit(void)
+{
+ destroy_workqueue(irqfd_cleanup_wq);
+}
+
+module_init(irqfd_module_init);
+module_exit(irqfd_module_exit);
+
+/*
+ * --------------------------------------------------------------------
+ * ioeventfd: translate a PIO/MMIO memory write to an eventfd signal.
+ *
+ * userspace can register a PIO/MMIO address with an eventfd for receiving
+ * notification when the memory has been touched.
+ * --------------------------------------------------------------------
+ */
+
+struct _ioeventfd {
+ struct list_head list;
+ u64 addr;
+ int length;
+ struct eventfd_ctx *eventfd;
+ u64 datamatch;
+ struct kvm_io_device dev;
+ bool wildcard;
+};
+
+static inline struct _ioeventfd *
+to_ioeventfd(struct kvm_io_device *dev)
+{
+ return container_of(dev, struct _ioeventfd, dev);
+}
+
+static void
+ioeventfd_release(struct _ioeventfd *p)
+{
+ eventfd_ctx_put(p->eventfd);
+ list_del(&p->list);
+ kfree(p);
+}
+
+static bool
+ioeventfd_in_range(struct _ioeventfd *p, gpa_t addr, int len, const void *val)
+{
+ u64 _val;
+
+ if (!(addr == p->addr && len == p->length))
+ /* address-range must be precise for a hit */
+ return false;
+
+ if (p->wildcard)
+ /* all else equal, wildcard is always a hit */
+ return true;
+
+ /* otherwise, we have to actually compare the data */
+
+ BUG_ON(!IS_ALIGNED((unsigned long)val, len));
+
+ switch (len) {
+ case 1:
+ _val = *(u8 *)val;
+ break;
+ case 2:
+ _val = *(u16 *)val;
+ break;
+ case 4:
+ _val = *(u32 *)val;
+ break;
+ case 8:
+ _val = *(u64 *)val;
+ break;
+ default:
+ return false;
+ }
+
+ return _val == p->datamatch ? true : false;
+}
+
+/* MMIO/PIO writes trigger an event if the addr/val match */
+static int
+ioeventfd_write(struct kvm_io_device *this, gpa_t addr, int len,
+ const void *val)
+{
+ struct _ioeventfd *p = to_ioeventfd(this);
+
+ if (!ioeventfd_in_range(p, addr, len, val))
+ return -EOPNOTSUPP;
+
+ eventfd_signal(p->eventfd, 1);
+ return 0;
+}
+
+/*
+ * This function is called as KVM is completely shutting down. We do not
+ * need to worry about locking just nuke anything we have as quickly as possible
+ */
+static void
+ioeventfd_destructor(struct kvm_io_device *this)
+{
+ struct _ioeventfd *p = to_ioeventfd(this);
+
+ ioeventfd_release(p);
+}
+
+static const struct kvm_io_device_ops ioeventfd_ops = {
+ .write = ioeventfd_write,
+ .destructor = ioeventfd_destructor,
+};
+
+/* assumes kvm->slots_lock held */
+static bool
+ioeventfd_check_collision(struct kvm *kvm, struct _ioeventfd *p)
+{
+ struct _ioeventfd *_p;
+
+ list_for_each_entry(_p, &kvm->ioeventfds, list)
+ if (_p->addr == p->addr && _p->length == p->length &&
+ (_p->wildcard || p->wildcard ||
+ _p->datamatch == p->datamatch))
+ return true;
+
+ return false;
+}
+
+static int
+kvm_assign_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
+{
+ int pio = args->flags & KVM_IOEVENTFD_FLAG_PIO;
+ struct kvm_io_bus *bus = pio ? &kvm->pio_bus : &kvm->mmio_bus;
+ struct _ioeventfd *p;
+ struct eventfd_ctx *eventfd;
+ int ret;
+
+ /* must be natural-word sized */
+ switch (args->len) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* check for range overflow */
+ if (args->addr + args->len < args->addr)
+ return -EINVAL;
+
+ /* check for extra flags that we don't understand */
+ if (args->flags & ~KVM_IOEVENTFD_VALID_FLAG_MASK)
+ return -EINVAL;
+
+ eventfd = eventfd_ctx_fdget(args->fd);
+ if (IS_ERR(eventfd))
+ return PTR_ERR(eventfd);
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ INIT_LIST_HEAD(&p->list);
+ p->addr = args->addr;
+ p->length = args->len;
+ p->eventfd = eventfd;
+
+ /* The datamatch feature is optional, otherwise this is a wildcard */
+ if (args->flags & KVM_IOEVENTFD_FLAG_DATAMATCH)
+ p->datamatch = args->datamatch;
+ else
+ p->wildcard = true;
+
+ down_write(&kvm->slots_lock);
+
+ /* Verify that there isnt a match already */
+ if (ioeventfd_check_collision(kvm, p)) {
+ ret = -EEXIST;
+ goto unlock_fail;
+ }
+
+ kvm_iodevice_init(&p->dev, &ioeventfd_ops);
+
+ ret = __kvm_io_bus_register_dev(bus, &p->dev);
+ if (ret < 0)
+ goto unlock_fail;
+
+ list_add_tail(&p->list, &kvm->ioeventfds);
+
+ up_write(&kvm->slots_lock);
+
+ return 0;
+
+unlock_fail:
+ up_write(&kvm->slots_lock);
+
+fail:
+ kfree(p);
+ eventfd_ctx_put(eventfd);
+
+ return ret;
+}
+
+static int
+kvm_deassign_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
+{
+ int pio = args->flags & KVM_IOEVENTFD_FLAG_PIO;
+ struct kvm_io_bus *bus = pio ? &kvm->pio_bus : &kvm->mmio_bus;
+ struct _ioeventfd *p, *tmp;
+ struct eventfd_ctx *eventfd;
+ int ret = -ENOENT;
+
+ eventfd = eventfd_ctx_fdget(args->fd);
+ if (IS_ERR(eventfd))
+ return PTR_ERR(eventfd);
+
+ down_write(&kvm->slots_lock);
+
+ list_for_each_entry_safe(p, tmp, &kvm->ioeventfds, list) {
+ bool wildcard = !(args->flags & KVM_IOEVENTFD_FLAG_DATAMATCH);
+
+ if (p->eventfd != eventfd ||
+ p->addr != args->addr ||
+ p->length != args->len ||
+ p->wildcard != wildcard)
+ continue;
+
+ if (!p->wildcard && p->datamatch != args->datamatch)
+ continue;
+
+ __kvm_io_bus_unregister_dev(bus, &p->dev);
+ ioeventfd_release(p);
+ ret = 0;
+ break;
+ }
+
+ up_write(&kvm->slots_lock);
+
+ eventfd_ctx_put(eventfd);
+
+ return ret;
+}
+
+int
+kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
+{
+ if (args->flags & KVM_IOEVENTFD_FLAG_DEASSIGN)
+ return kvm_deassign_ioeventfd(kvm, args);
+
+ return kvm_assign_ioeventfd(kvm, args);
+}
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 1150c6d5..9fe140b 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -36,6 +36,7 @@
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/current.h>
+#include <trace/events/kvm.h>
#include "ioapic.h"
#include "lapic.h"
@@ -103,6 +104,7 @@
{
unsigned index;
bool mask_before, mask_after;
+ union kvm_ioapic_redirect_entry *e;
switch (ioapic->ioregsel) {
case IOAPIC_REG_VERSION:
@@ -122,19 +124,20 @@
ioapic_debug("change redir index %x val %x\n", index, val);
if (index >= IOAPIC_NUM_PINS)
return;
- mask_before = ioapic->redirtbl[index].fields.mask;
+ e = &ioapic->redirtbl[index];
+ mask_before = e->fields.mask;
if (ioapic->ioregsel & 1) {
- ioapic->redirtbl[index].bits &= 0xffffffff;
- ioapic->redirtbl[index].bits |= (u64) val << 32;
+ e->bits &= 0xffffffff;
+ e->bits |= (u64) val << 32;
} else {
- ioapic->redirtbl[index].bits &= ~0xffffffffULL;
- ioapic->redirtbl[index].bits |= (u32) val;
- ioapic->redirtbl[index].fields.remote_irr = 0;
+ e->bits &= ~0xffffffffULL;
+ e->bits |= (u32) val;
+ e->fields.remote_irr = 0;
}
- mask_after = ioapic->redirtbl[index].fields.mask;
+ mask_after = e->fields.mask;
if (mask_before != mask_after)
kvm_fire_mask_notifiers(ioapic->kvm, index, mask_after);
- if (ioapic->redirtbl[index].fields.trig_mode == IOAPIC_LEVEL_TRIG
+ if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG
&& ioapic->irr & (1 << index))
ioapic_service(ioapic, index);
break;
@@ -164,7 +167,9 @@
/* Always delivery PIT interrupt to vcpu 0 */
if (irq == 0) {
irqe.dest_mode = 0; /* Physical mode. */
- irqe.dest_id = ioapic->kvm->vcpus[0]->vcpu_id;
+ /* need to read apic_id from apic regiest since
+ * it can be rewritten */
+ irqe.dest_id = ioapic->kvm->bsp_vcpu->vcpu_id;
}
#endif
return kvm_irq_delivery_to_apic(ioapic->kvm, NULL, &irqe);
@@ -188,7 +193,10 @@
if ((edge && old_irr != ioapic->irr) ||
(!edge && !entry.fields.remote_irr))
ret = ioapic_service(ioapic, irq);
+ else
+ ret = 0; /* report coalesced interrupt */
}
+ trace_kvm_ioapic_set_irq(entry.bits, irq, ret == 0);
}
return ret;
}
@@ -220,24 +228,29 @@
__kvm_ioapic_update_eoi(ioapic, i, trigger_mode);
}
-static int ioapic_in_range(struct kvm_io_device *this, gpa_t addr,
- int len, int is_write)
+static inline struct kvm_ioapic *to_ioapic(struct kvm_io_device *dev)
{
- struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private;
+ return container_of(dev, struct kvm_ioapic, dev);
+}
+static inline int ioapic_in_range(struct kvm_ioapic *ioapic, gpa_t addr)
+{
return ((addr >= ioapic->base_address &&
(addr < ioapic->base_address + IOAPIC_MEM_LENGTH)));
}
-static void ioapic_mmio_read(struct kvm_io_device *this, gpa_t addr, int len,
- void *val)
+static int ioapic_mmio_read(struct kvm_io_device *this, gpa_t addr, int len,
+ void *val)
{
- struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private;
+ struct kvm_ioapic *ioapic = to_ioapic(this);
u32 result;
+ if (!ioapic_in_range(ioapic, addr))
+ return -EOPNOTSUPP;
ioapic_debug("addr %lx\n", (unsigned long)addr);
ASSERT(!(addr & 0xf)); /* check alignment */
+ mutex_lock(&ioapic->kvm->irq_lock);
addr &= 0xff;
switch (addr) {
case IOAPIC_REG_SELECT:
@@ -264,22 +277,28 @@
default:
printk(KERN_WARNING "ioapic: wrong length %d\n", len);
}
+ mutex_unlock(&ioapic->kvm->irq_lock);
+ return 0;
}
-static void ioapic_mmio_write(struct kvm_io_device *this, gpa_t addr, int len,
- const void *val)
+static int ioapic_mmio_write(struct kvm_io_device *this, gpa_t addr, int len,
+ const void *val)
{
- struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private;
+ struct kvm_ioapic *ioapic = to_ioapic(this);
u32 data;
+ if (!ioapic_in_range(ioapic, addr))
+ return -EOPNOTSUPP;
ioapic_debug("ioapic_mmio_write addr=%p len=%d val=%p\n",
(void*)addr, len, val);
ASSERT(!(addr & 0xf)); /* check alignment */
+
+ mutex_lock(&ioapic->kvm->irq_lock);
if (len == 4 || len == 8)
data = *(u32 *) val;
else {
printk(KERN_WARNING "ioapic: Unsupported size %d\n", len);
- return;
+ goto unlock;
}
addr &= 0xff;
@@ -300,6 +319,9 @@
default:
break;
}
+unlock:
+ mutex_unlock(&ioapic->kvm->irq_lock);
+ return 0;
}
void kvm_ioapic_reset(struct kvm_ioapic *ioapic)
@@ -314,21 +336,27 @@
ioapic->id = 0;
}
+static const struct kvm_io_device_ops ioapic_mmio_ops = {
+ .read = ioapic_mmio_read,
+ .write = ioapic_mmio_write,
+};
+
int kvm_ioapic_init(struct kvm *kvm)
{
struct kvm_ioapic *ioapic;
+ int ret;
ioapic = kzalloc(sizeof(struct kvm_ioapic), GFP_KERNEL);
if (!ioapic)
return -ENOMEM;
kvm->arch.vioapic = ioapic;
kvm_ioapic_reset(ioapic);
- ioapic->dev.read = ioapic_mmio_read;
- ioapic->dev.write = ioapic_mmio_write;
- ioapic->dev.in_range = ioapic_in_range;
- ioapic->dev.private = ioapic;
+ kvm_iodevice_init(&ioapic->dev, &ioapic_mmio_ops);
ioapic->kvm = kvm;
- kvm_io_bus_register_dev(&kvm->mmio_bus, &ioapic->dev);
- return 0;
+ ret = kvm_io_bus_register_dev(kvm, &kvm->mmio_bus, &ioapic->dev);
+ if (ret < 0)
+ kfree(ioapic);
+
+ return ret;
}
diff --git a/virt/kvm/iodev.h b/virt/kvm/iodev.h
index 55e8846..12fd3ca 100644
--- a/virt/kvm/iodev.h
+++ b/virt/kvm/iodev.h
@@ -17,49 +17,54 @@
#define __KVM_IODEV_H__
#include <linux/kvm_types.h>
+#include <asm/errno.h>
-struct kvm_io_device {
- void (*read)(struct kvm_io_device *this,
+struct kvm_io_device;
+
+/**
+ * kvm_io_device_ops are called under kvm slots_lock.
+ * read and write handlers return 0 if the transaction has been handled,
+ * or non-zero to have it passed to the next device.
+ **/
+struct kvm_io_device_ops {
+ int (*read)(struct kvm_io_device *this,
+ gpa_t addr,
+ int len,
+ void *val);
+ int (*write)(struct kvm_io_device *this,
gpa_t addr,
int len,
- void *val);
- void (*write)(struct kvm_io_device *this,
- gpa_t addr,
- int len,
- const void *val);
- int (*in_range)(struct kvm_io_device *this, gpa_t addr, int len,
- int is_write);
+ const void *val);
void (*destructor)(struct kvm_io_device *this);
-
- void *private;
};
-static inline void kvm_iodevice_read(struct kvm_io_device *dev,
- gpa_t addr,
- int len,
- void *val)
+
+struct kvm_io_device {
+ const struct kvm_io_device_ops *ops;
+};
+
+static inline void kvm_iodevice_init(struct kvm_io_device *dev,
+ const struct kvm_io_device_ops *ops)
{
- dev->read(dev, addr, len, val);
+ dev->ops = ops;
}
-static inline void kvm_iodevice_write(struct kvm_io_device *dev,
- gpa_t addr,
- int len,
- const void *val)
+static inline int kvm_iodevice_read(struct kvm_io_device *dev,
+ gpa_t addr, int l, void *v)
{
- dev->write(dev, addr, len, val);
+ return dev->ops->read ? dev->ops->read(dev, addr, l, v) : -EOPNOTSUPP;
}
-static inline int kvm_iodevice_inrange(struct kvm_io_device *dev,
- gpa_t addr, int len, int is_write)
+static inline int kvm_iodevice_write(struct kvm_io_device *dev,
+ gpa_t addr, int l, const void *v)
{
- return dev->in_range(dev, addr, len, is_write);
+ return dev->ops->write ? dev->ops->write(dev, addr, l, v) : -EOPNOTSUPP;
}
static inline void kvm_iodevice_destructor(struct kvm_io_device *dev)
{
- if (dev->destructor)
- dev->destructor(dev);
+ if (dev->ops->destructor)
+ dev->ops->destructor(dev);
}
#endif /* __KVM_IODEV_H__ */
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index ddc17f0..001663f 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -20,6 +20,7 @@
*/
#include <linux/kvm_host.h>
+#include <trace/events/kvm.h>
#include <asm/msidef.h>
#ifdef CONFIG_IA64
@@ -62,14 +63,14 @@
int i, r = -1;
struct kvm_vcpu *vcpu, *lowest = NULL;
+ WARN_ON(!mutex_is_locked(&kvm->irq_lock));
+
if (irq->dest_mode == 0 && irq->dest_id == 0xff &&
kvm_is_dm_lowest_prio(irq))
printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n");
- for (i = 0; i < KVM_MAX_VCPUS; i++) {
- vcpu = kvm->vcpus[i];
-
- if (!vcpu || !kvm_apic_present(vcpu))
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (!kvm_apic_present(vcpu))
continue;
if (!kvm_apic_match_dest(vcpu, src, irq->shorthand,
@@ -99,6 +100,8 @@
{
struct kvm_lapic_irq irq;
+ trace_kvm_msi_set_irq(e->msi.address_lo, e->msi.data);
+
irq.dest_id = (e->msi.address_lo &
MSI_ADDR_DEST_ID_MASK) >> MSI_ADDR_DEST_ID_SHIFT;
irq.vector = (e->msi.data &
@@ -113,7 +116,7 @@
return kvm_irq_delivery_to_apic(kvm, NULL, &irq);
}
-/* This should be called with the kvm->lock mutex held
+/* This should be called with the kvm->irq_lock mutex held
* Return value:
* < 0 Interrupt was ignored (masked or not delivered for other reasons)
* = 0 Interrupt was coalesced (previous irq is still pending)
@@ -125,6 +128,10 @@
unsigned long *irq_state, sig_level;
int ret = -1;
+ trace_kvm_set_irq(irq, level, irq_source_id);
+
+ WARN_ON(!mutex_is_locked(&kvm->irq_lock));
+
if (irq < KVM_IOAPIC_NUM_PINS) {
irq_state = (unsigned long *)&kvm->arch.irq_states[irq];
@@ -134,7 +141,9 @@
else
clear_bit(irq_source_id, irq_state);
sig_level = !!(*irq_state);
- } else /* Deal with MSI/MSI-X */
+ } else if (!level)
+ return ret;
+ else /* Deal with MSI/MSI-X */
sig_level = 1;
/* Not possible to detect if the guest uses the PIC or the
@@ -159,6 +168,8 @@
struct hlist_node *n;
unsigned gsi = pin;
+ trace_kvm_ack_irq(irqchip, pin);
+
list_for_each_entry(e, &kvm->irq_routing, link)
if (e->type == KVM_IRQ_ROUTING_IRQCHIP &&
e->irqchip.irqchip == irqchip &&
@@ -175,19 +186,26 @@
void kvm_register_irq_ack_notifier(struct kvm *kvm,
struct kvm_irq_ack_notifier *kian)
{
+ mutex_lock(&kvm->irq_lock);
hlist_add_head(&kian->link, &kvm->arch.irq_ack_notifier_list);
+ mutex_unlock(&kvm->irq_lock);
}
-void kvm_unregister_irq_ack_notifier(struct kvm_irq_ack_notifier *kian)
+void kvm_unregister_irq_ack_notifier(struct kvm *kvm,
+ struct kvm_irq_ack_notifier *kian)
{
+ mutex_lock(&kvm->irq_lock);
hlist_del_init(&kian->link);
+ mutex_unlock(&kvm->irq_lock);
}
-/* The caller must hold kvm->lock mutex */
int kvm_request_irq_source_id(struct kvm *kvm)
{
unsigned long *bitmap = &kvm->arch.irq_sources_bitmap;
- int irq_source_id = find_first_zero_bit(bitmap,
+ int irq_source_id;
+
+ mutex_lock(&kvm->irq_lock);
+ irq_source_id = find_first_zero_bit(bitmap,
sizeof(kvm->arch.irq_sources_bitmap));
if (irq_source_id >= sizeof(kvm->arch.irq_sources_bitmap)) {
@@ -197,6 +215,7 @@
ASSERT(irq_source_id != KVM_USERSPACE_IRQ_SOURCE_ID);
set_bit(irq_source_id, bitmap);
+ mutex_unlock(&kvm->irq_lock);
return irq_source_id;
}
@@ -207,6 +226,7 @@
ASSERT(irq_source_id != KVM_USERSPACE_IRQ_SOURCE_ID);
+ mutex_lock(&kvm->irq_lock);
if (irq_source_id < 0 ||
irq_source_id >= sizeof(kvm->arch.irq_sources_bitmap)) {
printk(KERN_ERR "kvm: IRQ source ID out of range!\n");
@@ -215,19 +235,24 @@
for (i = 0; i < KVM_IOAPIC_NUM_PINS; i++)
clear_bit(irq_source_id, &kvm->arch.irq_states[i]);
clear_bit(irq_source_id, &kvm->arch.irq_sources_bitmap);
+ mutex_unlock(&kvm->irq_lock);
}
void kvm_register_irq_mask_notifier(struct kvm *kvm, int irq,
struct kvm_irq_mask_notifier *kimn)
{
+ mutex_lock(&kvm->irq_lock);
kimn->irq = irq;
hlist_add_head(&kimn->link, &kvm->mask_notifier_list);
+ mutex_unlock(&kvm->irq_lock);
}
void kvm_unregister_irq_mask_notifier(struct kvm *kvm, int irq,
struct kvm_irq_mask_notifier *kimn)
{
+ mutex_lock(&kvm->irq_lock);
hlist_del(&kimn->link);
+ mutex_unlock(&kvm->irq_lock);
}
void kvm_fire_mask_notifiers(struct kvm *kvm, int irq, bool mask)
@@ -235,6 +260,8 @@
struct kvm_irq_mask_notifier *kimn;
struct hlist_node *n;
+ WARN_ON(!mutex_is_locked(&kvm->irq_lock));
+
hlist_for_each_entry(kimn, n, &kvm->mask_notifier_list, link)
if (kimn->irq == irq)
kimn->func(kimn, mask);
@@ -250,7 +277,9 @@
void kvm_free_irq_routing(struct kvm *kvm)
{
+ mutex_lock(&kvm->irq_lock);
__kvm_free_irq_routing(&kvm->irq_routing);
+ mutex_unlock(&kvm->irq_lock);
}
static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e,
@@ -325,13 +354,13 @@
e = NULL;
}
- mutex_lock(&kvm->lock);
+ mutex_lock(&kvm->irq_lock);
list_splice(&kvm->irq_routing, &tmp);
INIT_LIST_HEAD(&kvm->irq_routing);
list_splice(&irq_list, &kvm->irq_routing);
INIT_LIST_HEAD(&irq_list);
list_splice(&tmp, &irq_list);
- mutex_unlock(&kvm->lock);
+ mutex_unlock(&kvm->irq_lock);
r = 0;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 2884baf..897bff3 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -59,9 +59,18 @@
#include "irq.h"
#endif
+#define CREATE_TRACE_POINTS
+#include <trace/events/kvm.h>
+
MODULE_AUTHOR("Qumranet");
MODULE_LICENSE("GPL");
+/*
+ * Ordering of locks:
+ *
+ * kvm->slots_lock --> kvm->lock --> kvm->irq_lock
+ */
+
DEFINE_SPINLOCK(kvm_lock);
LIST_HEAD(vm_list);
@@ -79,6 +88,8 @@
static bool kvm_rebooting;
+static bool largepages_enabled = true;
+
#ifdef KVM_CAP_DEVICE_ASSIGNMENT
static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
int assigned_dev_id)
@@ -120,17 +131,13 @@
{
struct kvm_assigned_dev_kernel *assigned_dev;
struct kvm *kvm;
- int irq, i;
+ int i;
assigned_dev = container_of(work, struct kvm_assigned_dev_kernel,
interrupt_work);
kvm = assigned_dev->kvm;
- /* This is taken to safely inject irq inside the guest. When
- * the interrupt injection (or the ioapic code) uses a
- * finer-grained lock, update this
- */
- mutex_lock(&kvm->lock);
+ mutex_lock(&kvm->irq_lock);
spin_lock_irq(&assigned_dev->assigned_dev_lock);
if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
struct kvm_guest_msix_entry *guest_entries =
@@ -143,23 +150,13 @@
kvm_set_irq(assigned_dev->kvm,
assigned_dev->irq_source_id,
guest_entries[i].vector, 1);
- irq = assigned_dev->host_msix_entries[i].vector;
- if (irq != 0)
- enable_irq(irq);
- assigned_dev->host_irq_disabled = false;
}
- } else {
+ } else
kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
assigned_dev->guest_irq, 1);
- if (assigned_dev->irq_requested_type &
- KVM_DEV_IRQ_GUEST_MSI) {
- enable_irq(assigned_dev->host_irq);
- assigned_dev->host_irq_disabled = false;
- }
- }
spin_unlock_irq(&assigned_dev->assigned_dev_lock);
- mutex_unlock(&assigned_dev->kvm->lock);
+ mutex_unlock(&assigned_dev->kvm->irq_lock);
}
static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
@@ -179,8 +176,10 @@
schedule_work(&assigned_dev->interrupt_work);
- disable_irq_nosync(irq);
- assigned_dev->host_irq_disabled = true;
+ if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_GUEST_INTX) {
+ disable_irq_nosync(irq);
+ assigned_dev->host_irq_disabled = true;
+ }
out:
spin_unlock_irqrestore(&assigned_dev->assigned_dev_lock, flags);
@@ -215,7 +214,7 @@
static void deassign_guest_irq(struct kvm *kvm,
struct kvm_assigned_dev_kernel *assigned_dev)
{
- kvm_unregister_irq_ack_notifier(&assigned_dev->ack_notifier);
+ kvm_unregister_irq_ack_notifier(kvm, &assigned_dev->ack_notifier);
assigned_dev->ack_notifier.gsi = -1;
if (assigned_dev->irq_source_id != -1)
@@ -417,6 +416,7 @@
{
dev->guest_irq = irq->guest_irq;
dev->ack_notifier.gsi = -1;
+ dev->host_irq_disabled = false;
return 0;
}
#endif
@@ -427,6 +427,7 @@
{
dev->guest_irq = irq->guest_irq;
dev->ack_notifier.gsi = -1;
+ dev->host_irq_disabled = false;
return 0;
}
#endif
@@ -693,11 +694,6 @@
}
#endif
-static inline int valid_vcpu(int n)
-{
- return likely(n >= 0 && n < KVM_MAX_VCPUS);
-}
-
inline int kvm_is_mmio_pfn(pfn_t pfn)
{
if (pfn_valid(pfn)) {
@@ -745,12 +741,9 @@
if (alloc_cpumask_var(&cpus, GFP_ATOMIC))
cpumask_clear(cpus);
- me = get_cpu();
spin_lock(&kvm->requests_lock);
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- vcpu = kvm->vcpus[i];
- if (!vcpu)
- continue;
+ me = smp_processor_id();
+ kvm_for_each_vcpu(i, vcpu, kvm) {
if (test_and_set_bit(req, &vcpu->requests))
continue;
cpu = vcpu->cpu;
@@ -764,7 +757,6 @@
else
called = false;
spin_unlock(&kvm->requests_lock);
- put_cpu();
free_cpumask_var(cpus);
return called;
}
@@ -986,7 +978,9 @@
spin_lock_init(&kvm->mmu_lock);
spin_lock_init(&kvm->requests_lock);
kvm_io_bus_init(&kvm->pio_bus);
+ kvm_eventfd_init(kvm);
mutex_init(&kvm->lock);
+ mutex_init(&kvm->irq_lock);
kvm_io_bus_init(&kvm->mmio_bus);
init_rwsem(&kvm->slots_lock);
atomic_set(&kvm->users_count, 1);
@@ -1006,19 +1000,25 @@
static void kvm_free_physmem_slot(struct kvm_memory_slot *free,
struct kvm_memory_slot *dont)
{
+ int i;
+
if (!dont || free->rmap != dont->rmap)
vfree(free->rmap);
if (!dont || free->dirty_bitmap != dont->dirty_bitmap)
vfree(free->dirty_bitmap);
- if (!dont || free->lpage_info != dont->lpage_info)
- vfree(free->lpage_info);
+
+ for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) {
+ if (!dont || free->lpage_info[i] != dont->lpage_info[i]) {
+ vfree(free->lpage_info[i]);
+ free->lpage_info[i] = NULL;
+ }
+ }
free->npages = 0;
free->dirty_bitmap = NULL;
free->rmap = NULL;
- free->lpage_info = NULL;
}
void kvm_free_physmem(struct kvm *kvm)
@@ -1071,6 +1071,8 @@
{
struct kvm *kvm = filp->private_data;
+ kvm_irqfd_release(kvm);
+
kvm_put_kvm(kvm);
return 0;
}
@@ -1089,8 +1091,8 @@
{
int r;
gfn_t base_gfn;
- unsigned long npages, ugfn;
- unsigned long largepages, i;
+ unsigned long npages;
+ unsigned long i;
struct kvm_memory_slot *memslot;
struct kvm_memory_slot old, new;
@@ -1164,31 +1166,51 @@
else
new.userspace_addr = 0;
}
- if (npages && !new.lpage_info) {
- largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE;
- largepages -= base_gfn / KVM_PAGES_PER_HPAGE;
+ if (!npages)
+ goto skip_lpage;
- new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info));
+ for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) {
+ unsigned long ugfn;
+ unsigned long j;
+ int lpages;
+ int level = i + 2;
- if (!new.lpage_info)
+ /* Avoid unused variable warning if no large pages */
+ (void)level;
+
+ if (new.lpage_info[i])
+ continue;
+
+ lpages = 1 + (base_gfn + npages - 1) /
+ KVM_PAGES_PER_HPAGE(level);
+ lpages -= base_gfn / KVM_PAGES_PER_HPAGE(level);
+
+ new.lpage_info[i] = vmalloc(lpages * sizeof(*new.lpage_info[i]));
+
+ if (!new.lpage_info[i])
goto out_free;
- memset(new.lpage_info, 0, largepages * sizeof(*new.lpage_info));
+ memset(new.lpage_info[i], 0,
+ lpages * sizeof(*new.lpage_info[i]));
- if (base_gfn % KVM_PAGES_PER_HPAGE)
- new.lpage_info[0].write_count = 1;
- if ((base_gfn+npages) % KVM_PAGES_PER_HPAGE)
- new.lpage_info[largepages-1].write_count = 1;
+ if (base_gfn % KVM_PAGES_PER_HPAGE(level))
+ new.lpage_info[i][0].write_count = 1;
+ if ((base_gfn+npages) % KVM_PAGES_PER_HPAGE(level))
+ new.lpage_info[i][lpages - 1].write_count = 1;
ugfn = new.userspace_addr >> PAGE_SHIFT;
/*
* If the gfn and userspace address are not aligned wrt each
- * other, disable large page support for this slot
+ * other, or if explicitly asked to, disable large page
+ * support for this slot
*/
- if ((base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE - 1))
- for (i = 0; i < largepages; ++i)
- new.lpage_info[i].write_count = 1;
+ if ((base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE(level) - 1) ||
+ !largepages_enabled)
+ for (j = 0; j < lpages; ++j)
+ new.lpage_info[i][j].write_count = 1;
}
+skip_lpage:
+
/* Allocate page dirty bitmap if needed */
if ((new.flags & KVM_MEM_LOG_DIRTY_PAGES) && !new.dirty_bitmap) {
unsigned dirty_bytes = ALIGN(npages, BITS_PER_LONG) / 8;
@@ -1200,6 +1222,10 @@
if (old.npages)
kvm_arch_flush_shadow(kvm);
}
+#else /* not defined CONFIG_S390 */
+ new.user_alloc = user_alloc;
+ if (user_alloc)
+ new.userspace_addr = mem->userspace_addr;
#endif /* not defined CONFIG_S390 */
if (!npages)
@@ -1299,6 +1325,12 @@
return r;
}
+void kvm_disable_largepages(void)
+{
+ largepages_enabled = false;
+}
+EXPORT_SYMBOL_GPL(kvm_disable_largepages);
+
int is_error_page(struct page *page)
{
return page == bad_page;
@@ -1635,9 +1667,7 @@
for (;;) {
prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
- if ((kvm_arch_interrupt_allowed(vcpu) &&
- kvm_cpu_has_interrupt(vcpu)) ||
- kvm_arch_vcpu_runnable(vcpu)) {
+ if (kvm_arch_vcpu_runnable(vcpu)) {
set_bit(KVM_REQ_UNHALT, &vcpu->requests);
break;
}
@@ -1714,24 +1744,18 @@
*/
static int create_vcpu_fd(struct kvm_vcpu *vcpu)
{
- int fd = anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu, 0);
- if (fd < 0)
- kvm_put_kvm(vcpu->kvm);
- return fd;
+ return anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu, 0);
}
/*
* Creates some virtual cpus. Good luck creating more than one.
*/
-static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, int n)
+static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, u32 id)
{
int r;
- struct kvm_vcpu *vcpu;
+ struct kvm_vcpu *vcpu, *v;
- if (!valid_vcpu(n))
- return -EINVAL;
-
- vcpu = kvm_arch_vcpu_create(kvm, n);
+ vcpu = kvm_arch_vcpu_create(kvm, id);
if (IS_ERR(vcpu))
return PTR_ERR(vcpu);
@@ -1742,23 +1766,38 @@
return r;
mutex_lock(&kvm->lock);
- if (kvm->vcpus[n]) {
- r = -EEXIST;
+ if (atomic_read(&kvm->online_vcpus) == KVM_MAX_VCPUS) {
+ r = -EINVAL;
goto vcpu_destroy;
}
- kvm->vcpus[n] = vcpu;
- mutex_unlock(&kvm->lock);
+
+ kvm_for_each_vcpu(r, v, kvm)
+ if (v->vcpu_id == id) {
+ r = -EEXIST;
+ goto vcpu_destroy;
+ }
+
+ BUG_ON(kvm->vcpus[atomic_read(&kvm->online_vcpus)]);
/* Now it's all set up, let userspace reach it */
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
- if (r < 0)
- goto unlink;
+ if (r < 0) {
+ kvm_put_kvm(kvm);
+ goto vcpu_destroy;
+ }
+
+ kvm->vcpus[atomic_read(&kvm->online_vcpus)] = vcpu;
+ smp_wmb();
+ atomic_inc(&kvm->online_vcpus);
+
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+ if (kvm->bsp_vcpu_id == id)
+ kvm->bsp_vcpu = vcpu;
+#endif
+ mutex_unlock(&kvm->lock);
return r;
-unlink:
- mutex_lock(&kvm->lock);
- kvm->vcpus[n] = NULL;
vcpu_destroy:
mutex_unlock(&kvm->lock);
kvm_arch_vcpu_destroy(vcpu);
@@ -2199,6 +2238,7 @@
vfree(entries);
break;
}
+#endif /* KVM_CAP_IRQ_ROUTING */
#ifdef __KVM_HAVE_MSIX
case KVM_ASSIGN_SET_MSIX_NR: {
struct kvm_assigned_msix_nr entry_nr;
@@ -2221,7 +2261,35 @@
break;
}
#endif
-#endif /* KVM_CAP_IRQ_ROUTING */
+ case KVM_IRQFD: {
+ struct kvm_irqfd data;
+
+ r = -EFAULT;
+ if (copy_from_user(&data, argp, sizeof data))
+ goto out;
+ r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
+ break;
+ }
+ case KVM_IOEVENTFD: {
+ struct kvm_ioeventfd data;
+
+ r = -EFAULT;
+ if (copy_from_user(&data, argp, sizeof data))
+ goto out;
+ r = kvm_ioeventfd(kvm, &data);
+ break;
+ }
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+ case KVM_SET_BOOT_CPU_ID:
+ r = 0;
+ mutex_lock(&kvm->lock);
+ if (atomic_read(&kvm->online_vcpus) != 0)
+ r = -EBUSY;
+ else
+ kvm->bsp_vcpu_id = arg;
+ mutex_unlock(&kvm->lock);
+ break;
+#endif
default:
r = kvm_arch_vm_ioctl(filp, ioctl, arg);
}
@@ -2288,6 +2356,9 @@
case KVM_CAP_USER_MEMORY:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS:
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+ case KVM_CAP_SET_BOOT_CPU_ID:
+#endif
return 1;
#ifdef CONFIG_HAVE_KVM_IRQCHIP
case KVM_CAP_IRQ_ROUTING:
@@ -2335,7 +2406,7 @@
case KVM_TRACE_ENABLE:
case KVM_TRACE_PAUSE:
case KVM_TRACE_DISABLE:
- r = kvm_trace_ioctl(ioctl, arg);
+ r = -EOPNOTSUPP;
break;
default:
return kvm_arch_dev_ioctl(filp, ioctl, arg);
@@ -2449,26 +2520,71 @@
}
}
-struct kvm_io_device *kvm_io_bus_find_dev(struct kvm_io_bus *bus,
- gpa_t addr, int len, int is_write)
+/* kvm_io_bus_write - called under kvm->slots_lock */
+int kvm_io_bus_write(struct kvm_io_bus *bus, gpa_t addr,
+ int len, const void *val)
+{
+ int i;
+ for (i = 0; i < bus->dev_count; i++)
+ if (!kvm_iodevice_write(bus->devs[i], addr, len, val))
+ return 0;
+ return -EOPNOTSUPP;
+}
+
+/* kvm_io_bus_read - called under kvm->slots_lock */
+int kvm_io_bus_read(struct kvm_io_bus *bus, gpa_t addr, int len, void *val)
+{
+ int i;
+ for (i = 0; i < bus->dev_count; i++)
+ if (!kvm_iodevice_read(bus->devs[i], addr, len, val))
+ return 0;
+ return -EOPNOTSUPP;
+}
+
+int kvm_io_bus_register_dev(struct kvm *kvm, struct kvm_io_bus *bus,
+ struct kvm_io_device *dev)
+{
+ int ret;
+
+ down_write(&kvm->slots_lock);
+ ret = __kvm_io_bus_register_dev(bus, dev);
+ up_write(&kvm->slots_lock);
+
+ return ret;
+}
+
+/* An unlocked version. Caller must have write lock on slots_lock. */
+int __kvm_io_bus_register_dev(struct kvm_io_bus *bus,
+ struct kvm_io_device *dev)
+{
+ if (bus->dev_count > NR_IOBUS_DEVS-1)
+ return -ENOSPC;
+
+ bus->devs[bus->dev_count++] = dev;
+
+ return 0;
+}
+
+void kvm_io_bus_unregister_dev(struct kvm *kvm,
+ struct kvm_io_bus *bus,
+ struct kvm_io_device *dev)
+{
+ down_write(&kvm->slots_lock);
+ __kvm_io_bus_unregister_dev(bus, dev);
+ up_write(&kvm->slots_lock);
+}
+
+/* An unlocked version. Caller must have write lock on slots_lock. */
+void __kvm_io_bus_unregister_dev(struct kvm_io_bus *bus,
+ struct kvm_io_device *dev)
{
int i;
- for (i = 0; i < bus->dev_count; i++) {
- struct kvm_io_device *pos = bus->devs[i];
-
- if (pos->in_range(pos, addr, len, is_write))
- return pos;
- }
-
- return NULL;
-}
-
-void kvm_io_bus_register_dev(struct kvm_io_bus *bus, struct kvm_io_device *dev)
-{
- BUG_ON(bus->dev_count > (NR_IOBUS_DEVS-1));
-
- bus->devs[bus->dev_count++] = dev;
+ for (i = 0; i < bus->dev_count; i++)
+ if (bus->devs[i] == dev) {
+ bus->devs[i] = bus->devs[--bus->dev_count];
+ break;
+ }
}
static struct notifier_block kvm_cpu_notifier = {
@@ -2501,11 +2617,9 @@
*val = 0;
spin_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list)
- for (i = 0; i < KVM_MAX_VCPUS; ++i) {
- vcpu = kvm->vcpus[i];
- if (vcpu)
- *val += *(u32 *)((void *)vcpu + offset);
- }
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ *val += *(u32 *)((void *)vcpu + offset);
+
spin_unlock(&kvm_lock);
return 0;
}
@@ -2679,15 +2793,15 @@
__free_page(bad_page);
out:
kvm_arch_exit();
- kvm_exit_debug();
out_fail:
+ kvm_exit_debug();
return r;
}
EXPORT_SYMBOL_GPL(kvm_init);
void kvm_exit(void)
{
- kvm_trace_cleanup();
+ tracepoint_synchronize_unregister();
misc_deregister(&kvm_dev);
kmem_cache_destroy(kvm_vcpu_cache);
sysdev_unregister(&kvm_sysdev);
diff --git a/virt/kvm/kvm_trace.c b/virt/kvm/kvm_trace.c
deleted file mode 100644
index f598744..0000000
--- a/virt/kvm/kvm_trace.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * kvm trace
- *
- * It is designed to allow debugging traces of kvm to be generated
- * on UP / SMP machines. Each trace entry can be timestamped so that
- * it's possible to reconstruct a chronological record of trace events.
- * The implementation refers to blktrace kernel support.
- *
- * Copyright (c) 2008 Intel Corporation
- * Copyright (C) 2006 Jens Axboe <axboe@kernel.dk>
- *
- * Authors: Feng(Eric) Liu, eric.e.liu@intel.com
- *
- * Date: Feb 2008
- */
-
-#include <linux/module.h>
-#include <linux/relay.h>
-#include <linux/debugfs.h>
-#include <linux/ktime.h>
-
-#include <linux/kvm_host.h>
-
-#define KVM_TRACE_STATE_RUNNING (1 << 0)
-#define KVM_TRACE_STATE_PAUSE (1 << 1)
-#define KVM_TRACE_STATE_CLEARUP (1 << 2)
-
-struct kvm_trace {
- int trace_state;
- struct rchan *rchan;
- struct dentry *lost_file;
- atomic_t lost_records;
-};
-static struct kvm_trace *kvm_trace;
-
-struct kvm_trace_probe {
- const char *name;
- const char *format;
- u32 timestamp_in;
- marker_probe_func *probe_func;
-};
-
-static inline int calc_rec_size(int timestamp, int extra)
-{
- int rec_size = KVM_TRC_HEAD_SIZE;
-
- rec_size += extra;
- return timestamp ? rec_size += KVM_TRC_CYCLE_SIZE : rec_size;
-}
-
-static void kvm_add_trace(void *probe_private, void *call_data,
- const char *format, va_list *args)
-{
- struct kvm_trace_probe *p = probe_private;
- struct kvm_trace *kt = kvm_trace;
- struct kvm_trace_rec rec;
- struct kvm_vcpu *vcpu;
- int i, size;
- u32 extra;
-
- if (unlikely(kt->trace_state != KVM_TRACE_STATE_RUNNING))
- return;
-
- rec.rec_val = TRACE_REC_EVENT_ID(va_arg(*args, u32));
- vcpu = va_arg(*args, struct kvm_vcpu *);
- rec.pid = current->tgid;
- rec.vcpu_id = vcpu->vcpu_id;
-
- extra = va_arg(*args, u32);
- WARN_ON(!(extra <= KVM_TRC_EXTRA_MAX));
- extra = min_t(u32, extra, KVM_TRC_EXTRA_MAX);
-
- rec.rec_val |= TRACE_REC_TCS(p->timestamp_in)
- | TRACE_REC_NUM_DATA_ARGS(extra);
-
- if (p->timestamp_in) {
- rec.u.timestamp.timestamp = ktime_to_ns(ktime_get());
-
- for (i = 0; i < extra; i++)
- rec.u.timestamp.extra_u32[i] = va_arg(*args, u32);
- } else {
- for (i = 0; i < extra; i++)
- rec.u.notimestamp.extra_u32[i] = va_arg(*args, u32);
- }
-
- size = calc_rec_size(p->timestamp_in, extra * sizeof(u32));
- relay_write(kt->rchan, &rec, size);
-}
-
-static struct kvm_trace_probe kvm_trace_probes[] = {
- { "kvm_trace_entryexit", "%u %p %u %u %u %u %u %u", 1, kvm_add_trace },
- { "kvm_trace_handler", "%u %p %u %u %u %u %u %u", 0, kvm_add_trace },
-};
-
-static int lost_records_get(void *data, u64 *val)
-{
- struct kvm_trace *kt = data;
-
- *val = atomic_read(&kt->lost_records);
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(kvm_trace_lost_ops, lost_records_get, NULL, "%llu\n");
-
-/*
- * The relay channel is used in "no-overwrite" mode, it keeps trace of how
- * many times we encountered a full subbuffer, to tell user space app the
- * lost records there were.
- */
-static int kvm_subbuf_start_callback(struct rchan_buf *buf, void *subbuf,
- void *prev_subbuf, size_t prev_padding)
-{
- struct kvm_trace *kt;
-
- if (!relay_buf_full(buf)) {
- if (!prev_subbuf) {
- /*
- * executed only once when the channel is opened
- * save metadata as first record
- */
- subbuf_start_reserve(buf, sizeof(u32));
- *(u32 *)subbuf = 0x12345678;
- }
-
- return 1;
- }
-
- kt = buf->chan->private_data;
- atomic_inc(&kt->lost_records);
-
- return 0;
-}
-
-static struct dentry *kvm_create_buf_file_callack(const char *filename,
- struct dentry *parent,
- int mode,
- struct rchan_buf *buf,
- int *is_global)
-{
- return debugfs_create_file(filename, mode, parent, buf,
- &relay_file_operations);
-}
-
-static int kvm_remove_buf_file_callback(struct dentry *dentry)
-{
- debugfs_remove(dentry);
- return 0;
-}
-
-static struct rchan_callbacks kvm_relay_callbacks = {
- .subbuf_start = kvm_subbuf_start_callback,
- .create_buf_file = kvm_create_buf_file_callack,
- .remove_buf_file = kvm_remove_buf_file_callback,
-};
-
-static int do_kvm_trace_enable(struct kvm_user_trace_setup *kuts)
-{
- struct kvm_trace *kt;
- int i, r = -ENOMEM;
-
- if (!kuts->buf_size || !kuts->buf_nr)
- return -EINVAL;
-
- kt = kzalloc(sizeof(*kt), GFP_KERNEL);
- if (!kt)
- goto err;
-
- r = -EIO;
- atomic_set(&kt->lost_records, 0);
- kt->lost_file = debugfs_create_file("lost_records", 0444, kvm_debugfs_dir,
- kt, &kvm_trace_lost_ops);
- if (!kt->lost_file)
- goto err;
-
- kt->rchan = relay_open("trace", kvm_debugfs_dir, kuts->buf_size,
- kuts->buf_nr, &kvm_relay_callbacks, kt);
- if (!kt->rchan)
- goto err;
-
- kvm_trace = kt;
-
- for (i = 0; i < ARRAY_SIZE(kvm_trace_probes); i++) {
- struct kvm_trace_probe *p = &kvm_trace_probes[i];
-
- r = marker_probe_register(p->name, p->format, p->probe_func, p);
- if (r)
- printk(KERN_INFO "Unable to register probe %s\n",
- p->name);
- }
-
- kvm_trace->trace_state = KVM_TRACE_STATE_RUNNING;
-
- return 0;
-err:
- if (kt) {
- if (kt->lost_file)
- debugfs_remove(kt->lost_file);
- if (kt->rchan)
- relay_close(kt->rchan);
- kfree(kt);
- }
- return r;
-}
-
-static int kvm_trace_enable(char __user *arg)
-{
- struct kvm_user_trace_setup kuts;
- int ret;
-
- ret = copy_from_user(&kuts, arg, sizeof(kuts));
- if (ret)
- return -EFAULT;
-
- ret = do_kvm_trace_enable(&kuts);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int kvm_trace_pause(void)
-{
- struct kvm_trace *kt = kvm_trace;
- int r = -EINVAL;
-
- if (kt == NULL)
- return r;
-
- if (kt->trace_state == KVM_TRACE_STATE_RUNNING) {
- kt->trace_state = KVM_TRACE_STATE_PAUSE;
- relay_flush(kt->rchan);
- r = 0;
- }
-
- return r;
-}
-
-void kvm_trace_cleanup(void)
-{
- struct kvm_trace *kt = kvm_trace;
- int i;
-
- if (kt == NULL)
- return;
-
- if (kt->trace_state == KVM_TRACE_STATE_RUNNING ||
- kt->trace_state == KVM_TRACE_STATE_PAUSE) {
-
- kt->trace_state = KVM_TRACE_STATE_CLEARUP;
-
- for (i = 0; i < ARRAY_SIZE(kvm_trace_probes); i++) {
- struct kvm_trace_probe *p = &kvm_trace_probes[i];
- marker_probe_unregister(p->name, p->probe_func, p);
- }
- marker_synchronize_unregister();
-
- relay_close(kt->rchan);
- debugfs_remove(kt->lost_file);
- kfree(kt);
- }
-}
-
-int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- long r = -EINVAL;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- switch (ioctl) {
- case KVM_TRACE_ENABLE:
- r = kvm_trace_enable(argp);
- break;
- case KVM_TRACE_PAUSE:
- r = kvm_trace_pause();
- break;
- case KVM_TRACE_DISABLE:
- r = 0;
- kvm_trace_cleanup();
- break;
- }
-
- return r;
-}